Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5282 files changed, 487357 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore
new file mode 100644
index 0000000000..51ddb26d93
--- /dev/null
+++ b/Documentation/devicetree/bindings/.gitignore
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+*.example.dts
+/processed-schema*.yaml
+/processed-schema*.json
+
+#
+# We don't want to ignore the following even if they are dot-files
+#
+!.yamllint
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
new file mode 100644
index 0000000000..fea5231e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -0,0 +1,44 @@
+extends: relaxed
+
+rules:
+  quoted-strings:
+    required: only-when-needed
+    extra-allowed:
+      - '[$^,[]'
+      - '^/$'
+  line-length:
+    # 80 chars should be enough, but don't fail if a line is longer
+    max: 110
+    allow-non-breakable-words: true
+    level: warning
+  braces:
+    min-spaces-inside: 0
+    max-spaces-inside: 1
+    min-spaces-inside-empty: 0
+    max-spaces-inside-empty: 0
+  brackets:
+    min-spaces-inside: 0
+    max-spaces-inside: 1
+    min-spaces-inside-empty: 0
+    max-spaces-inside-empty: 0
+  colons: {max-spaces-before: 0, max-spaces-after: 1}
+  commas: {min-spaces-after: 1, max-spaces-after: 1}
+  comments:
+    require-starting-space: true
+    min-spaces-from-content: 1
+  comments-indentation: disable
+  document-start:
+    present: true
+  empty-lines:
+    max: 3
+    max-end: 1
+  empty-values:
+    forbid-in-block-mappings: true
+    forbid-in-flow-mappings: true
+  hyphens:
+    max-spaces-after: 1
+  indentation:
+    spaces: 2
+    indent-sequences: true
+    check-multi-line-strings: false
+  trailing-spaces: false
diff --git a/Documentation/devicetree/bindings/ABI.rst b/Documentation/devicetree/bindings/ABI.rst
new file mode 100644
index 0000000000..a885713cf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/ABI.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+Devicetree (DT) ABI
+===================
+
+I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
+   summary document:
+
+     "That still leaves the question of, what does a stable binding look
+     like?  Certainly a stable binding means that a newer kernel will not
+     break on an older device tree, but that doesn't mean the binding is
+     frozen for all time. Grant said there are ways to change bindings that
+     don't result in breakage. For instance, if a new property is added,
+     then default to the previous behaviour if it is missing. If a binding
+     truly needs an incompatible change, then change the compatible string
+     at the same time.  The driver can bind against both the old and the
+     new. These guidelines aren't new, but they desperately need to be
+     documented."
+
+II.  General binding rules
+
+  1) Maintainers, don't let perfect be the enemy of good.  Don't hold up a
+     binding because it isn't perfect.
+
+  2) Use specific compatible strings so that if we need to add a feature (DMA)
+     in the future, we can create a new compatible string.  See I.
+
+  3) Bindings can be augmented, but the driver shouldn't break when given
+     the old binding. ie. add additional properties, but don't change the
+     meaning of an existing property. For drivers, default to the original
+     behaviour when a newly added property is missing.
+
+  4) Don't submit bindings for staging or unstable.  That will be decided by
+     the devicetree maintainers *after* discussion on the mailinglist.
+
+III. Notes
+
+  1) This document is intended as a general familiarization with the process as
+     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
+     devicetree maintainers overrules this document.  In that situation, a patch
+     updating this document would be appreciated.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
new file mode 100644
index 0000000000..8b395893bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/Makefile
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+DT_DOC_CHECKER ?= dt-doc-validate
+DT_EXTRACT_EX ?= dt-extract-example
+DT_MK_SCHEMA ?= dt-mk-schema
+
+DT_SCHEMA_LINT = $(shell which yamllint || \
+  echo "warning: python package 'yamllint' not installed, skipping" >&2)
+
+DT_SCHEMA_MIN_VERSION = 2022.3
+
+PHONY += check_dtschema_version
+check_dtschema_version:
+	@which $(DT_DOC_CHECKER) >/dev/null || \
+		{ echo "Error: '$(DT_DOC_CHECKER)' not found!" >&2; \
+		  echo "Ensure dtschema python package is installed and in your PATH." >&2; \
+		  echo "Current PATH is:" >&2; \
+		  echo "$$PATH" >&2; false; }
+	@{ echo $(DT_SCHEMA_MIN_VERSION); \
+	$(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -Vc >/dev/null || \
+	{ echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; }
+
+quiet_cmd_extract_ex = DTEX    $@
+      cmd_extract_ex = $(DT_EXTRACT_EX) $< > $@
+
+$(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
+	$(call if_changed,extract_ex)
+
+find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+		-name 'processed-schema*' \)
+
+find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
+CHK_DT_DOCS := $(shell $(find_cmd))
+
+quiet_cmd_yamllint = LINT    $(src)
+      cmd_yamllint = ($(find_cmd) | \
+                     xargs -n200 -P$$(nproc) \
+		     $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
+
+quiet_cmd_chk_bindings = CHKDT   $@
+      cmd_chk_bindings = ($(find_cmd) | \
+                         xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) || true
+
+quiet_cmd_mk_schema = SCHEMA  $@
+      cmd_mk_schema = f=$$(mktemp) ; \
+                      $(find_all_cmd) > $$f ; \
+                      $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
+		      rm -f $$f
+
+define rule_chkdt
+	$(if $(DT_SCHEMA_LINT),$(call cmd,yamllint),)
+	$(call cmd,chk_bindings)
+	$(call cmd,mk_schema)
+endef
+
+DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
+
+override DTC_FLAGS := \
+	-Wno-avoid_unnecessary_addr_size \
+	-Wno-graph_child_address \
+	-Wno-interrupt_provider \
+	-Wno-unique_unit_address \
+	-Wunique_unit_address_if_enabled
+
+# Disable undocumented compatible checks until warning free
+override DT_CHECKER_FLAGS ?=
+
+$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
+	$(call if_changed_rule,chkdt)
+
+always-y += processed-schema.json
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS))
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS))
+
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+			-name '*.example.dtb' \) -delete 2>/dev/null)
+
+dt_compatible_check: $(obj)/processed-schema.json
+	$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
new file mode 100644
index 0000000000..e4b9dcee6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -0,0 +1,17 @@
+* ARC HS Performance Counters
+
+The ARC HS can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits. Like conventional PCT there
+are 100+ hardware conditions dynamically mapped to up to 32 counters.
+It also supports overflow interrupts.
+
+Required properties:
+
+- compatible : should contain
+	"snps,archs-pct"
+
+Example:
+
+pmu {
+        compatible = "snps,archs-pct";
+};
diff --git a/Documentation/devicetree/bindings/arc/axs101.txt b/Documentation/devicetree/bindings/arc/axs101.txt
new file mode 100644
index 0000000000..48290d5178
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/axs101.txt
@@ -0,0 +1,7 @@
+Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+SDP Main Board with an AXC001 CPU Card hoisting ARC700 core in silicon
+
+Required root node properties:
+    - compatible = "snps,axs101", "snps,arc-sdp";
diff --git a/Documentation/devicetree/bindings/arc/axs103.txt b/Documentation/devicetree/bindings/arc/axs103.txt
new file mode 100644
index 0000000000..6eea862e72
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/axs103.txt
@@ -0,0 +1,8 @@
+Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+SDP Main Board with an AXC003 FPGA Card which can contain various flavours of
+HS38x cores.
+
+Required root node properties:
+    - compatible = "snps,axs103", "snps,arc-sdp";
diff --git a/Documentation/devicetree/bindings/arc/eznps.txt b/Documentation/devicetree/bindings/arc/eznps.txt
new file mode 100644
index 0000000000..1aa50c6406
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/eznps.txt
@@ -0,0 +1,7 @@
+EZchip NPS Network Processor Platforms Device Tree Bindings
+---------------------------------------------------------------------------
+
+Appliance main board with NPS400 ASIC.
+
+Required root node properties:
+    - compatible = "ezchip,arc-nps";
diff --git a/Documentation/devicetree/bindings/arc/hsdk.txt b/Documentation/devicetree/bindings/arc/hsdk.txt
new file mode 100644
index 0000000000..be50654bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/hsdk.txt
@@ -0,0 +1,7 @@
+Synopsys DesignWare ARC HS Development Kit Device Tree Bindings
+---------------------------------------------------------------------------
+
+ARC HSDK Board with quad-core ARC HS38x4 in silicon.
+
+Required root node properties:
+    - compatible = "snps,hsdk";
diff --git a/Documentation/devicetree/bindings/arc/pct.txt b/Documentation/devicetree/bindings/arc/pct.txt
new file mode 100644
index 0000000000..4e874d9a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/pct.txt
@@ -0,0 +1,20 @@
+* ARC Performance Counters
+
+The ARC700 can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits. Like conventional PCT there
+are 100+ hardware conditions dynamically mapped to up to 32 counters
+
+Note that:
+ * The ARC 700 PCT does not support interrupts; although HW events may be
+   counted, the HW events themselves cannot serve as a trigger for a sample.
+
+Required properties:
+
+- compatible : should contain
+	"snps,arc700-pct"
+
+Example:
+
+pmu {
+        compatible = "snps,arc700-pct";
+};
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
new file mode 100644
index 0000000000..e012f612f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/actions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi platforms
+
+maintainers:
+  - Andreas Färber <afaerber@suse.de>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      # The Actions Semi S500 is a quad-core ARM Cortex-A9 SoC.
+      - items:
+          - enum:
+              - allo,sparky # Allo.com Sparky
+              - cubietech,cubieboard6 # Cubietech CubieBoard6
+              - roseapplepi,roseapplepi # RoseapplePi.org RoseapplePi
+          - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-base-m # Labrador Base Board M v1
+          - const: caninos,labrador-v2  # Labrador Core v2
+          - const: actions,s500
+      - items:
+          - enum:
+              - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
+          - const: lemaker,guitar
+          - const: actions,s500
+
+      # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
+      - items:
+          - enum:
+              - caninos,labrador-base-m2 # Labrador Base Board M v2
+          - const: caninos,labrador-v3   # Labrador Core v3
+          - const: actions,s700
+      - items:
+          - enum:
+              - cubietech,cubieboard7 # Cubietech CubieBoard7
+          - const: actions,s700
+
+      # The Actions Semi S900 is a quad-core ARM Cortex-A53 SoC.
+      - items:
+          - enum:
+              - ucrobotics,bubblegum-96 # uCRobotics Bubblegum-96
+          - const: actions,s900
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 0000000000..3292c669ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
new file mode 100644
index 0000000000..8c75754554
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/altera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera's SoCFPGA platform
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Arria 5 boards
+        items:
+          - enum:
+              - altr,socfpga-arria5-socdk
+          - const: altr,socfpga-arria5
+          - const: altr,socfpga
+
+      - description: Arria 10 boards
+        items:
+          - enum:
+              - altr,socfpga-arria10-socdk
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Mercury+ AA1 boards
+        items:
+          - enum:
+              - enclustra,mercury-pe1
+              - google,chameleon-v3
+          - const: enclustra,mercury-aa1
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Cyclone 5 boards
+        items:
+          - enum:
+              - altr,socfpga-cyclone5-socdk
+              - denx,mcvevk
+              - ebv,socrates
+              - macnica,sodia
+              - novtech,chameleon96
+              - samtec,vining
+              - terasic,de0-atlas
+              - terasic,socfpga-cyclone5-sockit
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Stratix 10 boards
+        items:
+          - enum:
+              - altr,socfpga-stratix10-socdk
+              - altr,socfpga-stratix10-swvp
+          - const: altr,socfpga-stratix10
+
+      - description: SoCFPGA VT
+        items:
+          - const: altr,socfpga-vt
+          - const: altr,socfpga
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
new file mode 100644
index 0000000000..5723813066
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/altera/socfpga-clk-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Clock Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description: test
+
+properties:
+  compatible:
+    items:
+      - const: altr,clk-mgr
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    clkmgr@ffd04000 {
+      compatible = "altr,clk-mgr";
+      reg = <0xffd04000 0x1000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
new file mode 100644
index 0000000000..77ca635765
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt
@@ -0,0 +1,12 @@
+Altera SOCFPGA SDRAM Controller
+
+Required properties:
+- compatible : Should contain "altr,sdr-ctl" and "syscon".
+  syscon is required by the Altera SOCFPGA SDRAM EDAC.
+- reg : Should contain 1 register range (address and length)
+
+Example:
+	sdr: sdr@ffc25000 {
+		compatible = "altr,sdr-ctl", "syscon";
+		reg = <0xffc25000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
new file mode 100644
index 0000000000..f5ad0ff69f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
@@ -0,0 +1,15 @@
+Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
+The EDAC accesses a range of registers in the SDRAM controller.
+
+Required properties:
+- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10"
+- altr,sdr-syscon : phandle of the sdr module
+- interrupts : Should contain the SDRAM ECC IRQ in the
+	appropriate format for the IRQ controller.
+
+Example:
+	sdramedac {
+		compatible = "altr,sdram-edac";
+		altr,sdr-syscon = <&sdr>;
+		interrupts = <0 39 4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
new file mode 100644
index 0000000000..82edbaaa3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
@@ -0,0 +1,25 @@
+Altera SOCFPGA System Manager
+
+Required properties:
+- compatible : "altr,sys-mgr"
+- reg : Should contain 1 register ranges(address and length)
+- cpu1-start-addr : CPU1 start address in hex.
+
+Example:
+	 sysmgr@ffd08000 {
+		compatible = "altr,sys-mgr";
+		reg = <0xffd08000 0x1000>;
+		cpu1-start-addr = <0xffd080c4>;
+	};
+
+ARM64 - Stratix10
+Required properties:
+- compatible : "altr,sys-mgr-s10"
+- reg : Should contain 1 register range(address and length)
+        for system manager register.
+
+Example:
+	 sysmgr@ffd12000 {
+		compatible = "altr,sys-mgr-s10";
+		reg = <0xffd12000 0x228>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml
new file mode 100644
index 0000000000..37dbb4768e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amazon,al.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Alpine Platform
+
+maintainers:
+  - Hanna Hawa <hhhawa@amazon.com>
+  - Talel Shenhar <talel@amazon.com>, <talelshenhar@gmail.com>
+  - Ronen Krupnik <ronenk@amazon.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Boards with Alpine V1 SoC
+        items:
+          - const: al,alpine
+
+      - description: Boards with Alpine V2 SoC
+        items:
+          - enum:
+              - al,alpine-v2-evp
+          - const: al,alpine-v2
+
+      - description: Boards with Alpine V3 SoC
+        items:
+          - enum:
+              - amazon,al-alpine-v3-evp
+          - const: amazon,al-alpine-v3
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
new file mode 100644
index 0000000000..1c1094cd6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -0,0 +1,231 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amlogic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic SoC based Platforms
+
+maintainers:
+  - Kevin Hilman <khilman@baylibre.com>
+
+description: |+
+  Work in progress statement:
+
+  Device tree files and bindings applying to Amlogic SoCs and boards are
+  considered "unstable". Any Amlogic device tree binding may change at
+  any time. Be sure to use a device tree binary and a kernel image
+  generated from the same source tree.
+
+  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
+  stable binding/ABI.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Boards with the Amlogic Meson6 SoC
+        items:
+          - enum:
+              - geniatech,atv1200
+          - const: amlogic,meson6
+
+      - description: Boards with the Amlogic Meson8 SoC
+        items:
+          - enum:
+              - minix,neo-x8
+          - const: amlogic,meson8
+
+      - description: Boards with the Amlogic Meson8m2 SoC
+        items:
+          - enum:
+              - tronsmart,mxiii-plus
+          - const: amlogic,meson8m2
+
+      - description: Boards with the Amlogic Meson8b SoC
+        items:
+          - enum:
+              - endless,ec100
+              - hardkernel,odroid-c1
+              - tronfy,mxq
+          - const: amlogic,meson8b
+
+      - description: Boards with the Amlogic Meson GXBaby SoC
+        items:
+          - enum:
+              - amlogic,p200
+              - amlogic,p201
+              - friendlyarm,nanopi-k2
+              - hardkernel,odroid-c2
+              - nexbox,a95x
+              - videostrong,kii-pro
+              - wetek,hub
+              - wetek,play2
+          - const: amlogic,meson-gxbb
+
+      - description: Tronsmart Vega S95 devices
+        items:
+          - enum:
+              - tronsmart,vega-s95-pro
+              - tronsmart,vega-s95-meta
+              - tronsmart,vega-s95-telos
+          - const: tronsmart,vega-s95
+          - const: amlogic,meson-gxbb
+
+      - description: Boards with the Amlogic Meson GXL S805X SoC
+        items:
+          - enum:
+              - amlogic,p241
+              - libretech,aml-s805x-ac
+          - const: amlogic,s805x
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXL S905W SoC
+        items:
+          - enum:
+              - amlogic,p281
+              - oranth,tx3-mini
+              - jethome,jethub-j80
+          - const: amlogic,s905w
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXL S905X SoC
+        items:
+          - enum:
+              - amlogic,p212
+              - hwacom,amazetv
+              - khadas,vim
+              - libretech,aml-s905x-cc
+              - libretech,aml-s905x-cc-v2
+              - nexbox,a95x
+          - const: amlogic,s905x
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXL S905D SoC
+        items:
+          - enum:
+              - amlogic,p230
+              - amlogic,p231
+              - libretech,aml-s905d-pc
+              - osmc,vero4k-plus
+              - phicomm,n1
+              - smartlabs,sml5442tw
+              - videostrong,gxl-kii-pro
+          - const: amlogic,s905d
+          - const: amlogic,meson-gxl
+
+      - description: Boards with the Amlogic Meson GXM S912 SoC
+        items:
+          - enum:
+              - amlogic,q200
+              - amlogic,q201
+              - azw,gt1-ultimate
+              - khadas,vim2
+              - kingnovel,r-box-pro
+              - libretech,aml-s912-pc
+              - minix,neo-u9h
+              - nexbox,a1
+              - tronsmart,vega-s96
+              - videostrong,gxm-kiii-pro
+              - wetek,core2
+          - const: amlogic,s912
+          - const: amlogic,meson-gxm
+
+      - description: Boards with the Amlogic Meson AXG A113D SoC
+        items:
+          - enum:
+              - amlogic,s400
+              - jethome,jethub-j100
+              - jethome,jethub-j110
+          - const: amlogic,a113d
+          - const: amlogic,meson-axg
+
+      - description: Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC
+        items:
+          - enum:
+              - amediatech,x96-max
+              - amlogic,u200
+              - radxa,zero
+              - seirobotics,sei510
+          - const: amlogic,g12a
+
+      - description: Boards with the Amlogic Meson G12B A311D SoC
+        items:
+          - enum:
+              - bananapi,bpi-m2s
+              - khadas,vim3
+              - radxa,zero2
+          - const: amlogic,a311d
+          - const: amlogic,g12b
+
+      - description: Boards using the BPI-CM4 module with Amlogic Meson G12B A311D SoC
+        items:
+          - enum:
+              - bananapi,bpi-cm4io
+          - const: bananapi,bpi-cm4
+          - const: amlogic,a311d
+          - const: amlogic,g12b
+
+      - description: Boards with the Amlogic Meson G12B S922X SoC
+        items:
+          - enum:
+              - azw,gsking-x
+              - azw,gtking
+              - azw,gtking-pro
+              - bananapi,bpi-m2s
+              - hardkernel,odroid-go-ultra
+              - hardkernel,odroid-n2
+              - hardkernel,odroid-n2l
+              - hardkernel,odroid-n2-plus
+              - khadas,vim3
+              - ugoos,am6
+          - const: amlogic,s922x
+          - const: amlogic,g12b
+
+      - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
+        items:
+          - enum:
+              - amediatech,x96-air
+              - amediatech,x96-air-gbit
+              - bananapi,bpi-m2-pro
+              - bananapi,bpi-m5
+              - cyx,a95xf3-air
+              - cyx,a95xf3-air-gbit
+              - hardkernel,odroid-c4
+              - hardkernel,odroid-hc4
+              - haochuangyi,h96-max
+              - khadas,vim3l
+              - seirobotics,sei610
+          - const: amlogic,sm1
+
+      - description: Boards with the Amlogic Meson A1 A113L SoC
+        items:
+          - enum:
+              - amlogic,ad401
+          - const: amlogic,a1
+
+      - description: Boards with the Amlogic C3 C302X/C308L SoC
+        items:
+          - enum:
+              - amlogic,aw409
+              - amlogic,aw419
+          - const: amlogic,c3
+
+      - description: Boards with the Amlogic Meson S4 S805X2 SoC
+        items:
+          - enum:
+              - amlogic,aq222
+          - const: amlogic,s4
+
+      - description: Boards with the Amlogic T7 A311D2 SoC
+        items:
+          - enum:
+              - amlogic,an400
+              - khadas,vim4
+          - const: amlogic,a311d2
+          - const: amlogic,t7
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
new file mode 100644
index 0000000000..7dff32f373
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Firmware registers Interface
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Meson SoCs have a register bank with status and data shared with the
+  secure firmware.
+
+# We need a select here so we don't match all nodes with 'syscon'
+select:
+  properties:
+    compatible:
+      contains:
+        const: amlogic,meson-gx-ao-secure
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,meson-gx-ao-secure
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  amlogic,has-chip-id:
+    description: |
+      A firmware register encodes the SoC type, package and revision
+      information on the Meson GX SoCs. If present, the interface gives
+      the current SoC version.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ao-secure@140 {
+          compatible = "amlogic,meson-gx-ao-secure", "syscon";
+          reg = <0x140 0x140>;
+          amlogic,has-chip-id;
+    };
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
new file mode 100644
index 0000000000..09b27e98d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  The Meson8/Meson8b/Meson8m2 SoCs have a register bank called SECBUS2 which
+  contains registers for various IP blocks such as pin-controller bits for
+  the BSD_EN and TEST_N GPIOs as well as some AO ARC core control bits.
+  The registers can be accessed directly when not running in "secure mode".
+  When "secure mode" is enabled then these registers have to be accessed
+  through secure monitor calls.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-secbus2
+          - amlogic,meson8b-secbus2
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    secbus2: system-controller@4000 {
+      compatible = "amlogic,meson8-secbus2", "syscon";
+      reg = <0x4000 0x2000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
new file mode 100644
index 0000000000..101dc21014
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt
@@ -0,0 +1,20 @@
+Amlogic Meson8 and Meson8b "analog top" registers:
+--------------------------------------------------
+
+The analog top registers contain information about the so-called
+"metal revision" (which encodes the "minor version") of the SoC.
+
+Required properties:
+- reg: the register range of the analog top registers
+- compatible: depending on the SoC this should be one of:
+		- "amlogic,meson8-analog-top"
+		- "amlogic,meson8b-analog-top"
+		along with "syscon"
+
+
+Example:
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt
new file mode 100644
index 0000000000..7656812b67
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/assist.txt
@@ -0,0 +1,17 @@
+Amlogic Meson6/Meson8/Meson8b assist registers:
+-----------------------------------------------
+
+The assist registers contain basic information about the SoC,
+for example the encoded SoC part number.
+
+Required properties:
+- reg: the register range of the assist registers
+- compatible: should be "amlogic,meson-mx-assist" along with "syscon"
+
+
+Example:
+
+	assist: assist@7c00 {
+		compatible = "amlogic,meson-mx-assist", "syscon";
+		reg = <0x7c00 0x200>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
new file mode 100644
index 0000000000..407e27f230
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt
@@ -0,0 +1,17 @@
+Amlogic Meson6/Meson8/Meson8b bootrom:
+--------------------------------------
+
+The bootrom register area can be used to access SoC specific
+information, such as the "misc version".
+
+Required properties:
+- reg: the register range of the bootrom registers
+- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon"
+
+
+Example:
+
+	bootrom: bootrom@d9040000 {
+		compatible = "amlogic,meson-mx-bootrom", "syscon";
+		reg = <0xd9040000 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt
new file mode 100644
index 0000000000..72f8d08198
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt
@@ -0,0 +1,18 @@
+Amlogic Meson8 and Meson8b power-management-unit:
+-------------------------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : depending on the SoC this should be one of:
+			"amlogic,meson8-pmu"
+			"amlogic,meson8b-pmu"
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	pmu@c81000e4 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xc81000e0 0x18>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/apm/scu.txt b/Documentation/devicetree/bindings/arm/apm/scu.txt
new file mode 100644
index 0000000000..b45be06625
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apm/scu.txt
@@ -0,0 +1,17 @@
+APM X-GENE SoC series SCU Registers
+
+This system clock unit contain various register that control block resets,
+clock enable/disables, clock divisors and other deepsleep registers.
+
+Properties:
+ - compatible : should contain two values. First value must be:
+		   - "apm,xgene-scu"
+		second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+	scu: system-clk-controller@17000000 {
+		compatible = "apm,xgene-scu","syscon";
+		reg = <0x0 0x17000000 0x0 0x400>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
new file mode 100644
index 0000000000..883fd67e37
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ARM Machine
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".
+
+  This currently includes devices based on the "M1" SoC:
+
+  - Mac mini (M1, 2020)
+  - MacBook Pro (13-inch, M1, 2020)
+  - MacBook Air (M1, 2020)
+  - iMac (24-inch, M1, 2021)
+
+  Devices based on the "M2" SoC:
+
+  - MacBook Air (M2, 2022)
+  - MacBook Pro (13-inch, M2, 2022)
+  - Mac mini (M2, 2023)
+
+  And devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs:
+
+  - MacBook Pro (14-inch, M1 Pro, 2021)
+  - MacBook Pro (14-inch, M1 Max, 2021)
+  - MacBook Pro (16-inch, M1 Pro, 2021)
+  - MacBook Pro (16-inch, M1 Max, 2021)
+  - Mac Studio (M1 Max, 2022)
+  - Mac Studio (M1 Ultra, 2022)
+
+  The compatible property should follow this format:
+
+  compatible = "apple,<targettype>", "apple,<socid>", "apple,arm-platform";
+
+  <targettype> represents the board/device and comes from the `target-type`
+  property of the root node of the Apple Device Tree, lowercased. It can be
+  queried on macOS using the following command:
+
+  $ ioreg -d2 -l | grep target-type
+
+  <socid> is the lowercased SoC ID. Apple uses at least *five* different
+  names for their SoCs:
+
+  - Marketing name ("M1")
+  - Internal name ("H13G")
+  - Codename ("Tonga")
+  - SoC ID ("T8103")
+  - Package/IC part number ("APL1102")
+
+  Devicetrees should use the lowercased SoC ID, to avoid confusion if
+  multiple SoCs share the same marketing name. This can be obtained from
+  the `compatible` property of the arm-io node of the Apple Device Tree,
+  which can be queried as follows on macOS:
+
+  $ ioreg -n arm-io | grep compatible
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: Apple M1 SoC based platforms
+        items:
+          - enum:
+              - apple,j274 # Mac mini (M1, 2020)
+              - apple,j293 # MacBook Pro (13-inch, M1, 2020)
+              - apple,j313 # MacBook Air (M1, 2020)
+              - apple,j456 # iMac (24-inch, 4x USB-C, M1, 2021)
+              - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021)
+          - const: apple,t8103
+          - const: apple,arm-platform
+
+      - description: Apple M2 SoC based platforms
+        items:
+          - enum:
+              - apple,j413 # MacBook Air (M2, 2022)
+              - apple,j473 # Mac mini (M2, 2023)
+              - apple,j493 # MacBook Pro (13-inch, M2, 2022)
+          - const: apple,t8112
+          - const: apple,arm-platform
+
+      - description: Apple M1 Pro SoC based platforms
+        items:
+          - enum:
+              - apple,j314s # MacBook Pro (14-inch, M1 Pro, 2021)
+              - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021)
+          - const: apple,t6000
+          - const: apple,arm-platform
+
+      - description: Apple M1 Max SoC based platforms
+        items:
+          - enum:
+              - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021)
+              - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021)
+              - apple,j375c # Mac Studio (M1 Max, 2022)
+          - const: apple,t6001
+          - const: apple,arm-platform
+
+      - description: Apple M1 Ultra SoC based platforms
+        items:
+          - enum:
+              - apple,j375d # Mac Studio (M1 Ultra, 2022)
+          - const: apple,t6002
+          - const: apple,arm-platform
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
new file mode 100644
index 0000000000..673277a7a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple/apple,pmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Power Manager (PMGR)
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This node represents the PMGR as a syscon,
+  with sub-nodes representing individual features.
+
+properties:
+  $nodename:
+    pattern: "^power-management@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr
+          - apple,t8112-pmgr
+          - apple,t6000-pmgr
+      - const: apple,pmgr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "power-controller@[0-9a-f]+$":
+    description:
+      The individual power management domains within this controller
+    type: object
+    $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        power-management@23b700000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3b700000 0x0 0x14000>;
+
+            ps_sio: power-controller@1c0 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x1c0 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "sio";
+                apple,always-on;
+            };
+
+            ps_uart_p: power-controller@220 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x220 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart_p";
+                power-domains = <&ps_sio>;
+            };
+
+            ps_uart0: power-controller@270 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x270 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart0";
+                power-domains = <&ps_uart_p>;
+            };
+        };
+
+        power-management@23d280000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3d280000 0x0 0xc000>;
+
+            ps_aop_filter: power-controller@4000 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4000 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_filter";
+            };
+
+            ps_aop_base: power-controller@4010 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4010 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_base";
+                power-domains = <&ps_aop_filter>;
+            };
+
+            ps_aop_shim: power-controller@4038 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4038 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_shim";
+                power-domains = <&ps_aop_base>;
+            };
+
+            ps_aop_uart0: power-controller@4048 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4048 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_uart0";
+                power-domains = <&ps_aop_shim>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
new file mode 100644
index 0000000000..d28303d909
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,cci-400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCI Cache Coherent Interconnect
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: >
+  ARM multi-cluster systems maintain intra-cluster coherency through a cache
+  coherent interconnect (CCI) that is capable of monitoring bus transactions
+  and manage coherency, TLB invalidations and memory barriers.
+
+  It allows snooping and distributed virtual memory message broadcast across
+  clusters, through memory mapped interface, with a global control register
+  space and multiple sets of interface control registers, one per slave
+  interface.
+
+properties:
+  $nodename:
+    pattern: "^cci(@[0-9a-f]+)?$"
+
+  compatible:
+    enum:
+      - arm,cci-400
+      - arm,cci-500
+      - arm,cci-550
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies base physical address of CCI control registers common to all
+      interfaces.
+
+  "#address-cells": true
+  "#size-cells": true
+  ranges: true
+
+patternProperties:
+  "^slave-if@[0-9a-f]+$":
+    type: object
+
+    properties:
+      compatible:
+        const: arm,cci-400-ctrl-if
+
+      interface-type:
+        enum:
+          - ace
+          - ace-lite
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interface-type
+      - reg
+
+    additionalProperties: false
+
+  "^pmu@[0-9a-f]+$":
+    type: object
+
+    properties:
+      compatible:
+        oneOf:
+          - const: arm,cci-400-pmu,r0
+          - const: arm,cci-400-pmu,r1
+          - const: arm,cci-400-pmu
+            deprecated: true
+            description: >
+              Permitted only where OS has secure access to CCI registers
+          - const: arm,cci-500-pmu,r0
+          - const: arm,cci-550-pmu,r0
+
+      interrupts:
+        minItems: 1
+        maxItems: 8
+        description: >
+          List of counter overflow interrupts, one per counter. The interrupts
+          must be specified starting with the cycle counter overflow interrupt,
+          followed by counter0 overflow interrupt, counter1 overflow
+          interrupt,...  ,counterN overflow interrupt.
+
+          The CCI PMU has an interrupt signal for each counter. The number of
+          interrupts must be equal to the number of counters.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interrupts
+      - reg
+
+    additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - ranges
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      / {
+          #address-cells = <2>;
+          #size-cells = <2>;
+
+          compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+          model = "V2P-CA15_CA7";
+          arm,hbi = <0x249>;
+          interrupt-parent = <&gic>;
+
+          gic: interrupt-controller {
+              interrupt-controller;
+              #interrupt-cells = <3>;
+          };
+
+          /*
+           * This CCI node corresponds to a CCI component whose control
+           * registers sits at address 0x000000002c090000.
+           *
+           * CCI slave interface @0x000000002c091000 is connected to dma
+           * controller dma0.
+           *
+           * CCI slave interface @0x000000002c094000 is connected to CPUs
+           * {CPU0, CPU1};
+           *
+           * CCI slave interface @0x000000002c095000 is connected to CPUs
+           * {CPU2, CPU3};
+           */
+
+          cpus {
+              #size-cells = <0>;
+              #address-cells = <1>;
+
+              CPU0: cpu@0 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a15";
+                  cci-control-port = <&cci_control1>;
+                  reg = <0x0>;
+              };
+
+              CPU1: cpu@1 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a15";
+                  cci-control-port = <&cci_control1>;
+                  reg = <0x1>;
+              };
+
+              CPU2: cpu@100 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a7";
+                  cci-control-port = <&cci_control2>;
+                  reg = <0x100>;
+              };
+
+              CPU3: cpu@101 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a7";
+                  cci-control-port = <&cci_control2>;
+                  reg = <0x101>;
+              };
+          };
+
+          cci@2c090000 {
+              compatible = "arm,cci-400";
+              #address-cells = <1>;
+              #size-cells = <1>;
+              reg = <0x0 0x2c090000 0 0x1000>;
+              ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+              cci_control0: slave-if@1000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace-lite";
+                  reg = <0x1000 0x1000>;
+              };
+
+              cci_control1: slave-if@4000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace";
+                  reg = <0x4000 0x1000>;
+              };
+
+              cci_control2: slave-if@5000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace";
+                  reg = <0x5000 0x1000>;
+              };
+
+              pmu@9000 {
+                  compatible = "arm,cci-400-pmu";
+                  reg = <0x9000 0x5000>;
+                  interrupts = <0 101 4>,
+                    <0 102 4>,
+                    <0 103 4>,
+                    <0 104 4>,
+                    <0 105 4>;
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
new file mode 100644
index 0000000000..2bae06eed6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Address Translation Unit (CATU)
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Address Translation Unit (CATU) translates addresses between an
+  AXI master and system memory. The CATU is normally used along with the TMC to
+  implement scattering of virtual trace buffers in physical memory. The CATU
+  translates contiguous Virtual Addresses (VAs) from an AXI master into
+  non-contiguous Physical Addresses (PAs) that are intended for system memory.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-catu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-catu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  interrupts:
+    maxItems: 1
+    description: Address translation error interrupt
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI Slave connected to another Coresight component
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    catu@207e0000 {
+        compatible = "arm,coresight-catu", "arm,primecell";
+        reg = <0x207e0000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        in-ports {
+            port {
+                catu_in_port: endpoint {
+                    remote-endpoint = <&etr_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
new file mode 100644
index 0000000000..0a6bc03ebe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight CPU Debug Component
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight CPU debug component are compliant with the ARMv8 architecture
+  reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+  external debug module is mainly used for two modes: self-hosted debug and
+  external debug, and it can be accessed from mmio region from Coresight and
+  eventually the debug module connects with CPU for debugging. And the debug
+  module provides sample-based profiling extension, which can be used to sample
+  CPU program counter, secure state and exception level, etc; usually every CPU
+  has one dedicated debug module to be connected.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cpu-debug
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-cpu-debug
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  cpu:
+    description:
+      A phandle to the cpu this debug component is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle to the debug power domain if the debug logic has its own
+      dedicated power domain. CPU idle states may also need to be separately
+      constrained to keep CPU cores powered.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - cpu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    debug@f6590000 {
+        compatible = "arm,coresight-cpu-debug", "arm,primecell";
+        reg = <0xf6590000 0x1000>;
+        clocks = <&sys_ctrl 1>;
+        clock-names = "apb_pclk";
+        cpu = <&cpu0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
new file mode 100644
index 0000000000..6216cfb0a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -0,0 +1,334 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Cross Trigger Interface (CTI) device.
+
+description: |
+  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
+  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
+  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
+  The ECT components are not part of the trace generation data path and are thus
+  not part of the CoreSight graph.
+
+  The CTI component properties define the connections between the individual
+  CTI and the components it is directly connected to, consisting of input and
+  output hardware trigger signals. CTIs can have a maximum number of input and
+  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
+  number is defined at design time, the maximum of each defined in the DEVID
+  register.
+
+  CTIs are interconnected in a star topology via the CTM, using a number of
+  programmable channels, usually 4, but again implementation defined and
+  described in the DEVID register. The star topology is not required to be
+  described in the bindings as the actual connections are software
+  programmable.
+
+  In general the connections between CTI and components via the trigger signals
+  are implementation defined, except when the CTI is connected to an ARM v8
+  architecture core and optional ETM.
+
+  In this case the ARM v8 architecture defines the required signal connections
+  between CTI and the CPU core and ETM if present. In the case of a v8
+  architecturally connected CTI an additional compatible string is used to
+  indicate this feature (arm,coresight-cti-v8-arch).
+
+  When CTI trigger connection information is unavailable then a minimal driver
+  binding can be declared with no explicit trigger signals. This will result
+  the driver detecting the maximum available triggers and channels from the
+  DEVID register and make them all available for use as a single default
+  connection. Any user / client application will require additional information
+  on the connections between the CTI and other components for correct operation.
+  This information might be found by enabling the Integration Test registers in
+  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
+  configuration). These registers may be used to explore the trigger connections
+  between CTI and other CoreSight components.
+
+  Certain triggers between CoreSight devices and the CTI have specific types
+  and usages. These can be defined along with the signal indexes with the
+  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
+
+  For example a CTI connected to a core will usually have a DBGREQ signal. This
+  is defined in the binding as type PE_EDBGREQ. These types will appear in an
+  optional array alongside the signal indexes. Omitting types will default all
+  signals to GEN_IO.
+
+  Note that some hardware trigger signals can be connected to non-CoreSight
+  components (e.g. UART etc) depending on hardware implementation.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-cti
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^cti(@[0-9a-f]+)$"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,coresight-cti
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cti-v8-arch
+          - const: arm,coresight-cti
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Handle to cpu this device is associated with. This must appear in the
+      base cti node if compatible string arm,coresight-cti-v8-arch is used,
+      or may appear in a trig-conns child node when appropriate.
+
+  power-domains:
+    maxItems: 1
+
+  arm,cti-ctm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the CTM this CTI is connected to, in large systems with multiple
+      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
+      propagated between sockets.
+
+  arm,cs-dev-assoc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      defines a phandle reference to an associated CoreSight trace device.
+      When the associated trace device is enabled, then the respective CTI
+      will be enabled. Use in a trig-conns node, or in CTI base node when
+      compatible string arm,coresight-cti-v8-arch used. If the associated
+      device has not been registered then the node name will be stored as
+      the connection name for later resolution. If the associated device is
+      not a CoreSight device or not registered then the node name will remain
+      the connection name and automatic enabling will not occur.
+
+  # size cells and address cells required if trig-conns node present.
+  "#size-cells":
+    const: 0
+
+  "#address-cells":
+    const: 1
+
+patternProperties:
+  '^trig-conns@([0-9]+)$':
+    type: object
+    description:
+      A trigger connections child node which describes the trigger signals
+      between this CTI and another hardware device. This device may be a CPU,
+      CoreSight device, any other hardware device or simple external IO lines.
+      The connection may have both input and output triggers, or only one or the
+      other.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      arm,trig-in-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger in signal numbers in use by a trig-conns node.
+
+      arm,trig-in-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger in
+          signals. Types in this array match to the corresponding signal in the
+          arm,trig-in-sigs array. If the -types array is smaller, or omitted
+          completely, then the types will default to GEN_IO.
+
+      arm,trig-out-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signal numbers in use by a trig-conns node.
+
+      arm,trig-out-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger out
+          signals. Types in this array match to the corresponding signal
+          in the arm,trig-out-sigs array. If the "-types" array is smaller,
+          or omitted completely, then the types will default to GEN_IO.
+
+      arm,trig-filters:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signals that will be blocked from becoming
+          active, unless filtering is disabled on the driver.
+
+      arm,trig-conn-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Defines a connection name that will be displayed, if the cpu or
+          arm,cs-dev-assoc properties are not being used in this connection.
+          Principle use for CTI that are connected to non-CoreSight devices, or
+          external IO.
+
+    anyOf:
+      - required:
+          - arm,trig-in-sigs
+      - required:
+          - arm,trig-out-sigs
+    oneOf:
+      - required:
+          - arm,trig-conn-name
+      - required:
+          - cpu
+      - required:
+          - arm,cs-dev-assoc
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cti-v8-arch
+
+then:
+  required:
+    - cpu
+
+unevaluatedProperties: false
+
+examples:
+  # minimum CTI definition. DEVID register used to set number of triggers.
+  - |
+    cti@20020000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20020000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+    };
+  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
+  #  driver according to the v8 architecture specification.
+  - |
+    cti@859000 {
+      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+                   "arm,primecell";
+      reg = <0x859000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      cpu = <&CPU1>;
+      arm,cs-dev-assoc = <&etm1>;
+    };
+  # Implementation defined CTI - CPU + ETM connections explicitly defined..
+  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
+  # #size-cells and #address-cells are required if trig-conns@ nodes present.
+  - |
+    #include <dt-bindings/arm/coresight-cti-dt.h>
+
+    cti@858000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x858000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      arm,cti-ctm-id = <1>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+            reg = <0>;
+            arm,trig-in-sigs = <4 5 6 7>;
+            arm,trig-in-types = <ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT>;
+            arm,trig-out-sigs = <4 5 6 7>;
+            arm,trig-out-types = <ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN>;
+            arm,cs-dev-assoc = <&etm0>;
+      };
+
+      trig-conns@1 {
+            reg = <1>;
+            cpu = <&CPU0>;
+            arm,trig-in-sigs = <0 1>;
+            arm,trig-in-types = <PE_DBGTRIGGER
+                                 PE_PMUIRQ>;
+            arm,trig-out-sigs = <0 1 2 >;
+            arm,trig-out-types = <PE_EDBGREQ
+                                  PE_DBGRESTART
+                                  PE_CTIIRQ>;
+
+            arm,trig-filters = <0>;
+      };
+    };
+  # Implementation defined CTI - non CoreSight component connections.
+  - |
+    cti@20110000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20110000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+        reg = <0>;
+        arm,trig-in-sigs = <0>;
+        arm,trig-in-types = <GEN_INTREQ>;
+        arm,trig-out-sigs = <0>;
+        arm,trig-out-types = <GEN_HALTREQ>;
+        arm,trig-conn-name = "sys_profiler";
+      };
+
+      trig-conns@1 {
+        reg = <1>;
+        arm,trig-out-sigs = <2 3>;
+        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "watchdog";
+      };
+
+      trig-conns@2 {
+        reg = <2>;
+        arm,trig-in-sigs = <1 6>;
+        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "g_counter";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
new file mode 100644
index 0000000000..c960c8e0a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-sink.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-sink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy sink component
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight dummy sink component is for the specific coresight sink devices
+  kernel don't have permission to access or configure, e.g., CoreSight EUD on
+  Qualcomm platforms. It is a mini-USB hub implemented to support the USB-based
+  debug and trace capabilities. For this device, a dummy driver is needed to
+  register it as Coresight sink device in kernel side, so that path can be
+  created in the driver. Then the trace flow would be transferred to EUD via
+  coresight link of AP processor. It provides Coresight API for operations on
+  dummy source devices, such as enabling and disabling them. It also provides
+  the Coresight dummy source paths for debugging.
+
+  The primary use case of the coresight dummy sink is to build path in kernel
+  side for dummy sink component.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - James Clark <james.clark@arm.com>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,coresight-dummy-sink
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Input connection from the Coresight Trace bus to
+          dummy sink, such as Embedded USB debugger(EUD).
+
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+
+additionalProperties: false
+
+examples:
+  # Minimum dummy sink definition. Dummy sink connect to coresight replicator.
+  - |
+    sink {
+      compatible = "arm,coresight-dummy-sink";
+
+      in-ports {
+        port {
+          eud_in_replicator_swao: endpoint {
+            remote-endpoint = <&replicator_swao_out_eud>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
new file mode 100644
index 0000000000..6745b4cc8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dummy-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Dummy source component
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight dummy source component is for the specific coresight source
+  devices kernel don't have permission to access or configure. For some SOCs,
+  there would be Coresight source trace components on sub-processor which
+  are conneted to AP processor via debug bus. For these devices, a dummy driver
+  is needed to register them as Coresight source devices, so that paths can be
+  created in the driver. It provides Coresight API for operations on dummy
+  source devices, such as enabling and disabling them. It also provides the
+  Coresight dummy source paths for debugging.
+
+  The primary use case of the coresight dummy source is to build path in kernel
+  side for dummy source component.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - James Clark <james.clark@arm.com>
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Hao Zhang <quic_hazha@quicinc.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,coresight-dummy-source
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the source to Coresight
+          Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # Minimum dummy source definition. Dummy source connect to coresight funnel.
+  - |
+    source {
+      compatible = "arm,coresight-dummy-source";
+
+      out-ports {
+        port {
+          dummy_riscv_out_funnel_swao: endpoint {
+            remote-endpoint = <&funnel_swao_in_dummy_riscv>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
new file mode 100644
index 0000000000..44a1041cb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Programmable Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight funnel merges 2-8 trace sources into a single trace
+  stream with programmable enable and priority of input ports.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-funnel
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-funnel
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-7])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    funnel@20040000 {
+        compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+        reg = <0x20040000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                funnel_out_port0: endpoint {
+                    remote-endpoint = <&replicator_in_port0>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                funnel_in_port0: endpoint {
+                    remote-endpoint = <&ptm0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                funnel_in_port1: endpoint {
+                    remote-endpoint = <&ptm1_out_port>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                funnel_in_port2: endpoint {
+                    remote-endpoint = <&etm0_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
new file mode 100644
index 0000000000..03792e9bd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Programmable Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-replicator
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-replicator
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  qcom,replicator-loses-context:
+    type: boolean
+    description:
+      Indicates that the replicator will lose register context when AMBA clock
+      is removed which is observed in some replicator designs.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[01])?$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    replicator@20120000 {
+        compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+        reg = <0x20120000 0x1000>;
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&etr_in_port>;
+                };
+            };
+        };
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&csys2_funnel_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
new file mode 100644
index 0000000000..90679788e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace Buffer
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is
+  used as a circular buffer.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-etb10
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-etb10
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etb@20010000 {
+        compatible = "arm,coresight-etb10", "arm,primecell";
+        reg = <0x20010000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etb_in_port: endpoint {
+                    remote-endpoint = <&replicator_out_port0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
new file mode 100644
index 0000000000..01200f6750
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Embedded Trace Macrocell (ETM) is a real-time trace module providing
+  instruction and data tracing of a processor.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-etm3x
+          - arm,coresight-etm4x
+          - arm,coresight-etm4x-sysreg
+  required:
+    - compatible
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,coresight-etm4x-sysreg
+    then:
+      $ref: /schemas/arm/primecell.yaml#
+      required:
+        - reg
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Embedded Trace Macrocell with memory mapped access.
+        items:
+          - enum:
+              - arm,coresight-etm3x
+              - arm,coresight-etm4x
+          - const: arm,primecell
+      - description:
+          Embedded Trace Macrocell (version 4.x), with system register access only
+        const: arm,coresight-etm4x-sysreg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  arm,coresight-loses-context-with-cpu:
+    type: boolean
+    description:
+      Indicates that the hardware will lose register context on CPU power down
+      (e.g. CPUIdle). An example of where this may be needed are systems which
+      contain a coresight component and CPU in the same power domain. When the
+      CPU powers down the coresight component also powers down and loses its
+      context.
+
+  arm,cp14:
+    type: boolean
+    description:
+      Must be present if the system accesses ETM/PTM management registers via
+      co-processor 14.
+
+  qcom,skip-power-up:
+    type: boolean
+    description:
+      Indicates that an implementation can skip powering up the trace unit.
+      TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems
+      since ETMs are in the same power domain as their CPU cores. This property
+      is required to identify such systems with hardware errata where the CPU
+      watchdog counter is stopped when TRCPDCR.PU is set.
+
+  cpu:
+    description:
+      phandle to the cpu this ETM is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection from the ETM to CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - cpu
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ptm@2201c000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201c000 0x1000>;
+
+        cpu = <&cpu0>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm0_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port0>;
+                };
+            };
+        };
+    };
+
+    ptm@2201d000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201d000 0x1000>;
+
+        cpu = <&cpu1>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm1_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
new file mode 100644
index 0000000000..cc8c3baa79
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight static funnel merges 2-8 trace sources into a single trace
+  stream.
+
+properties:
+  compatible:
+    const: arm,coresight-static-funnel
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[0-7]$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    funnel {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-funnel";
+
+        out-ports {
+            port {
+                combo_funnel_out: endpoint {
+                    remote-endpoint = <&top_funnel_in>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                combo_funnel_in0: endpoint {
+                    remote-endpoint = <&cluster0_etf_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                combo_funnel_in1: endpoint {
+                    remote-endpoint = <&cluster1_etf_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
new file mode 100644
index 0000000000..1892a091ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+properties:
+  compatible:
+    const: arm,coresight-static-replicator
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[01]$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    replicator {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-replicator";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&etb_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+        };
+
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&funnel_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
new file mode 100644
index 0000000000..378380c3f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight System Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The STM is a trace source that is integrated into a CoreSight system, designed
+  primarily for high-bandwidth trace of instrumentation embedded into software.
+  This instrumentation is made up of memory-mapped writes to the STM Advanced
+  eXtensible Interface (AXI) slave, which carry information about the behavior
+  of the software.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-stm
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-stm
+      - const: arm,primecell
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stm-base
+      - const: stm-stimulus-base
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    stm@20100000 {
+        compatible = "arm,coresight-stm", "arm,primecell";
+        reg = <0x20100000 0x1000>,
+              <0x28000000 0x180000>;
+        reg-names = "stm-base", "stm-stimulus-base";
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                stm_out_port: endpoint {
+                    remote-endpoint = <&main_funnel_in_port2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
new file mode 100644
index 0000000000..cb8dceaca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Memory Controller
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
+  FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
+  mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tmc
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tmc
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  arm,buffer-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Size of contiguous buffer space for TMC ETR (embedded trace router). The
+      buffer size can be configured dynamically via buffer_size property in
+      sysfs instead.
+
+  arm,scatter-gather:
+    type: boolean
+    description:
+      Indicates that the TMC-ETR can safely use the SG mode on this system.
+
+  arm,max-burst-size:
+    description:
+      The maximum burst size initiated by TMC on the AXI master interface. The
+      burst size can be in the range [0..15], the setting supports one data
+      transfer per burst up to a maximum of 16 data transfers per burst.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI or ATB Master output connection. Used for ETR
+          and ETF configurations.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etr@20070000 {
+        compatible = "arm,coresight-tmc", "arm,primecell";
+        reg = <0x20070000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etr_in_port: endpoint {
+                    remote-endpoint = <&replicator2_out_port0>;
+                };
+            };
+        };
+
+        out-ports {
+            port {
+                etr_out_port: endpoint {
+                    remote-endpoint = <&catu_in_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
new file mode 100644
index 0000000000..61a0cdc277
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Port Interface Unit
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Trace Port Interface Unit captures trace data from the trace bus
+  and outputs it to an external trace port.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tpiu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tpiu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpiu@e3c05000 {
+        compatible = "arm,coresight-tpiu", "arm,primecell";
+        reg = <0xe3c05000 0x1000>;
+
+        clocks = <&clk_375m>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                tpiu_in_port: endpoint {
+                    remote-endpoint = <&funnel4_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
new file mode 100644
index 0000000000..693f3fe7be
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Corstone1000
+
+maintainers:
+  - Vishnu Banavath <vishnu.banavath@arm.com>
+  - Rui Miguel Silva <rui.silva@linaro.org>
+
+description: |+
+  ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
+  provides a flexible compute architecture that combines Cortex‑A and Cortex‑M
+  processors.
+
+  Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion
+  systems for M-Class (or other) processors for adding sensors, connectivity,
+  video, audio and machine learning at the edge System and security IPs to build
+  a secure SoC for a range of rich IoT applications, for example gateways, smart
+  cameras and embedded systems.
+
+  Integrated Secure Enclave providing hardware Root of Trust and supporting
+  seamless integration of the optional CryptoCell™-312 cryptographic
+  accelerator.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA
+          implementation of the Corstone1000 in the MPS3 prototyping board. See
+          ARM document DAI0550.
+        items:
+          - const: arm,corstone1000-mps3
+      - description: Corstone1000 FVP is the Fixed Virtual Platform
+          implementation of this system. See ARM ecosystems FVP's.
+        items:
+          - const: arm,corstone1000-fvp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
new file mode 100644
index 0000000000..f725e69409
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Embedded Trace Extensions
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description: |
+  Arm Embedded Trace Extension(ETE) is a per CPU trace component that
+  allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
+  architecture and has extended support for future architecture changes.
+  The trace generated by the ETE could be stored via legacy CoreSight
+  components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
+  Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
+  legacy CoreSight components, a node must be listed per instance, along
+  with any optional connection graph as per the coresight bindings.
+
+properties:
+  $nodename:
+    pattern: "^ete([0-9a-f]+)$"
+  compatible:
+    items:
+      - const: arm,embedded-trace-extension
+
+  cpu:
+    description: |
+      Handle to the cpu this ETE is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    description: |
+      Output connections from the ETE to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port:
+        description: Output connection from the ETE to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - cpu
+
+additionalProperties: false
+
+examples:
+
+# An ETE node without legacy CoreSight connections
+  - |
+    ete0 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_0>;
+    };
+# An ETE node with legacy CoreSight connections
+  - |
+   ete1 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_1>;
+
+      out-ports {        /* legacy coresight connection */
+         port {
+             ete1_out_port: endpoint {
+                remote-endpoint = <&funnel_in_port0>;
+             };
+         };
+      };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
new file mode 100644
index 0000000000..98ff5698ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Integrator Boards
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  These were the first ARM platforms officially supported by ARM Ltd.
+  They are ARMv4, ARMv5 and ARMv6-capable using different core tiles,
+  so the system is modular and can host a variety of CPU tiles called
+  "core tiles" and referred to in the device tree as "core modules".
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM Integrator Application Platform, this board has a PCI
+          host and several PCI slots, as well as a number of slots for logical
+          expansion modules, it is referred to as an "ASIC Development
+          Motherboard" and is extended with custom FPGA and is intended for
+          rapid prototyping. See ARM DUI 0098B. This board can physically come
+          pre-packaged in a PC Tower form factor called Integrator/PP1 or a
+          special metal fixture called Integrator/PP2, see ARM DUI 0169A.
+        items:
+          - const: arm,integrator-ap
+      - description: ARM Integrator Compact Platform (HBI-0086), this board has
+          a compact form factor and mainly consists of the bare minimum
+          peripherals to make use of the core module. See ARM DUI 0159B.
+        items:
+          - const: arm,integrator-cp
+      - description: ARM Integrator Standard Development Board (SDB) Platform,
+          this board is a PCI-based board conforming to the Microsoft SDB
+          (HARP) specification. See ARM DUI 0099A.
+        items:
+          - const: arm,integrator-sp
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Integrator platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Integrator variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-integrator
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    description: All Integrator boards must provide a system controller as a
+      node in the root of the device tree.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - arm,integrator-ap-syscon
+              - arm,integrator-cp-syscon
+              - arm,integrator-sp-syscon
+          - const: syscon
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+
+required:
+  - compatible
+  - core-module@10000000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
new file mode 100644
index 0000000000..8d3ed2e4ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,realview.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM RealView Boards
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM RealView series of reference designs were built to explore the ARM
+  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
+  the earlier CPUs such as TrustZone and multicore (MPCore).
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: ARM RealView Emulation Baseboard (HBI-0140) was created
+          as a generic platform to test different FPGA designs, and has
+          pluggable CPU modules, see ARM DUI 0303E.
+        items:
+          - const: arm,realview-eb
+      - description: ARM RealView Platform Baseboard for ARM1176JZF-S
+          (HBI-0147) was created as a development board to test ARM TrustZone,
+          CoreSight and Intelligent Energy Management (IEM) see ARM DUI 0425F.
+        items:
+          - const: arm,realview-pb1176
+      - description: ARM RealView Platform Baseboard for ARM 11 MPCore
+          (HBI-0159, HBI-0175 and HBI-0176) was created to showcase
+          multiprocessing with ARM11 using MPCore using symmetric
+          multiprocessing (SMP). See ARM DUI 0351E.
+        items:
+          - const: arm,realview-pb11mp
+      - description: ARM RealView Platform Baseboard for Cortex-A8 (HBI-0178,
+          HBI-0176 and HBI-0175) was the first reference platform for the
+          Cortex CPU family, including a Cortex-A8 test chip.
+        items:
+          - const: arm,realview-pba8
+      - description: ARM RealView Platform Baseboard Explore for Cortex-A9
+          (HBI-0182 and HBI-0183) was the reference platform for the Cortex-A9
+          CPU.
+        items:
+          - const: arm,realview-pbx
+
+  soc:
+    description: All RealView boards must provide a soc node in the root of the
+      device tree, representing the System-on-Chip since these test chips are
+      rather complex.
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: arm,realview-eb-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pb1176-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pb11mp-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pba8-soc
+              - const: simple-bus
+          - items:
+              - const: arm,realview-pbx-soc
+              - const: simple-bus
+
+    patternProperties:
+      "^.*syscon@[0-9a-f]+$":
+        type: object
+        description: All RealView boards must provide a syscon system controller
+          node inside the soc node.
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                  - const: arm,realview-eb11mp-revb-syscon
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-eb11mp-revc-syscon
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-eb-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pb1176-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pb11mp-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pba8-syscon
+                  - const: syscon
+                  - const: simple-mfd
+              - items:
+                  - const: arm,realview-pbx-syscon
+                  - const: syscon
+                  - const: simple-mfd
+
+        required:
+          - compatible
+          - reg
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,scu.yaml b/Documentation/devicetree/bindings/arm/arm,scu.yaml
new file mode 100644
index 0000000000..dae2aa27e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,scu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Snoop Control Unit (SCU)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided
+  with a Snoop Control Unit. The register range is usually 256 (0x100)
+  bytes.
+
+  References:
+    - Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual
+      Revision r2p0
+    - Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
+      Revision r0p1
+    - ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
+      Manial Revision r2p0
+
+properties:
+  compatible:
+    enum:
+      - arm,cortex-a9-scu
+      - arm,cortex-a5-scu
+      - arm,arm11mp-scu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scu@a0410000 {
+            compatible = "arm,cortex-a9-scu";
+            reg = <0xa0410000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
new file mode 100644
index 0000000000..87128e7b7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Trace Buffer Extensions
+
+maintainers:
+  - Anshuman Khandual <anshuman.khandual@arm.com>
+
+description: |
+  Arm Trace Buffer Extension (TRBE) is a per CPU component
+  for storing trace generated on the CPU to memory. It is
+  accessed via CPU system registers. The software can verify
+  if it is permitted to use the component by checking the
+  TRBIDR register.
+
+properties:
+  $nodename:
+    const: trbe
+
+  compatible:
+    items:
+      - const: arm,trace-buffer-extension
+
+  interrupts:
+    description: |
+       Exactly 1 PPI must be listed. For heterogeneous systems where
+       TRBE is only supported on a subset of the CPUs, please consult
+       the arm,gic-v3 binding for details on describing a PPI partition.
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   trbe {
+     compatible = "arm,trace-buffer-extension";
+     interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+   };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
new file mode 100644
index 0000000000..3b060c36b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Versatile system registers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    items:
+      - const: arm,versatile-sysreg
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  panel:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
new file mode 100644
index 0000000000..13e52ba920
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Boards
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards
+  with various pluggable interface boards, in essence the Versatile PB version
+  is a superset of the Versatile AB version.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The ARM Versatile Application Baseboard (HBI-0118) is an
+          evaluation board specifically for the ARM926EJ-S. It can be connected
+          to an IB1 interface board for a touchscreen-type use case or an IB2
+          for a candybar phone-type use case. See ARM DUI 0225D.
+        items:
+          - const: arm,versatile-ab
+      - description: The ARM Versatile Platform Baseboard (HBI-0117) is an
+          extension of the Versatile Application Baseboard that includes a
+          PCI host controller. Like the sibling board, it is done specifically
+          for ARM926EJ-S. See ARM DUI 0224B.
+        items:
+          - const: arm,versatile-pb
+
+  core-module@10000000:
+    type: object
+    description: the root node in the Versatile platforms must contain
+      a core module child node. They are always at physical address
+      0x10000000 in all the Versatile variants.
+    properties:
+      compatible:
+        items:
+          - const: arm,core-module-versatile
+          - const: syscon
+          - const: simple-mfd
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+patternProperties:
+  "^syscon@[0-9a-f]+$":
+    type: object
+    description: When fitted with the IB2 Interface Board, the Versatile
+      AB will present an optional system controller node which controls the
+      extra peripherals on the interface board.
+    properties:
+      compatible:
+        contains:
+          const: arm,versatile-ib2-syscon
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - core-module@10000000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
new file mode 100644
index 0000000000..8dd6b64463
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express and Juno Boards
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  ARM's Versatile Express platform were built as reference designs for exploring
+  multicore Cortex-A class systems. The Versatile Express family contains both
+  32 bit (Aarch32) and 64 bit (Aarch64) systems.
+
+  The board consist of a motherboard and one or more daughterboards (tiles). The
+  motherboard provides a set of peripherals. Processor and RAM "live" on the
+  tiles.
+
+  The motherboard and each core tile should be described by a separate Device
+  Tree source file, with the tile's description including the motherboard file
+  using an include directive. As the motherboard can be initialized in one of
+  two different configurations ("memory maps"), care must be taken to include
+  the correct one.
+
+  When a new generation of boards were introduced under the name "Juno", these
+  shared to many common characteristics with the Versatile Express that the
+  "arm,vexpress" compatible was retained in the root node, and these are
+  included in this binding schema as well.
+
+  The root node indicates the CPU SoC on the core tile, and this
+  is a daughterboard to the main motherboard. The name used in the compatible
+  string shall match the name given in the core tile's technical reference
+  manual, followed by "arm,vexpress" as an additional compatible value. If
+  further subvariants are released of the core tile, even more fine-granular
+  compatible strings with up to three compatible strings are used.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: CoreTile Express A9x4 (V2P-CA9) has 4 Cortex A9 CPU cores
+          in MPCore configuration in a test chip on the core tile. See ARM
+          DUI 0448I. This was the first Versatile Express platform.
+        items:
+          - const: arm,vexpress,v2p-ca9
+          - const: arm,vexpress
+      - description: CoreTile Express A5x2 (V2P-CA5s) has 2 Cortex A5 CPU cores
+          in a test chip on the core tile. It is intended to evaluate NEON, FPU
+          and Jazelle support in the Cortex A5 family. See ARM DUI 0541C.
+        items:
+          - const: arm,vexpress,v2p-ca5s
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 (V2P-CA15) has 2 Cortex A15 CPU
+          cores in a MPCore configuration in a test chip on the core tile. See
+          ARM DUI 0604F.
+        items:
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: CoreTile Express A15x4 (V2P-CA15, HBI-0237A) has 4 Cortex
+          A15 CPU cores in a test chip on the core tile. This is the first test
+          chip called "TC1".
+        items:
+          - const: arm,vexpress,v2p-ca15,tc1
+          - const: arm,vexpress,v2p-ca15
+          - const: arm,vexpress
+      - description: Coretile Express A15x2 A7x3 (V2P-CA15_A7) has 2 Cortex A15
+          CPU cores and 3 Cortex A7 cores in a big.LITTLE MPCore configuration
+          in a test chip on the core tile. See ARM DDI 0503I.
+        items:
+          - const: arm,vexpress,v2p-ca15_a7
+          - const: arm,vexpress
+      - description: LogicTile Express 20MG (V2F-1XV7) has 2 Cortex A53 CPU
+          cores in a test chip on the core tile. See ARM DDI 0498D.
+        items:
+          - const: arm,vexpress,v2f-1xv7,ca53x2
+          - const: arm,vexpress,v2f-1xv7
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno "r0" (the first Juno board,
+          V2M-Juno) was introduced as a vehicle for evaluating big.LITTLE on
+          AArch64 CPU cores. It has 2 Cortex A57 CPU cores and 4 Cortex A53
+          cores in a big.LITTLE configuration. It also features the MALI T624
+          GPU. See ARM document 100113_0000_07_en.
+        items:
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r1 Development Platform
+          (V2M-Juno r1) was introduced mainly aimed at development of PCIe
+          based systems. Juno r1 also has support for AXI masters placed on
+          the TLX connectors to join the coherency domain. Otherwise it is the
+          same configuration as Juno r0. See ARM document 100122_0100_06_en.
+        items:
+          - const: arm,juno-r1
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm Versatile Express Juno r2 Development Platform
+          (V2M-Juno r2). It has the same feature set as Juno r0 and r1. See
+          ARM document 100114_0200_04_en.
+        items:
+          - const: arm,juno-r2
+          - const: arm,juno
+          - const: arm,vexpress
+      - description: Arm AEMv8a Versatile Express Real-Time System Model
+          (VE RTSM) is a programmers view of the Versatile Express with Arm
+          v8A hardware. See ARM DUI 0575D.
+        items:
+          - const: arm,rtsm_ve,aemv8a
+          - const: arm,vexpress
+      - description: Arm FVP (Fixed Virtual Platform) base model revision C
+          See ARM Document 100964_1190_00_en.
+        items:
+          - const: arm,fvp-base-revc
+          - const: arm,vexpress
+      - description: Arm Foundation model for Aarch64
+        items:
+          - const: arm,foundation-aarch64
+          - const: arm,vexpress
+
+  arm,vexpress,position:
+    description: When daughterboards are stacked on one site, their position
+      in the stack be be described this attribute.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+  arm,vexpress,dcc:
+    description: When describing tiles consisting of more than one DCC, its
+      number can be specified with this attribute.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+patternProperties:
+  "^bus@[0-9a-f]+$":
+    description: Static Memory Bus (SMB) node, if this exists it describes
+      the connection between the motherboard and any tiles. Sometimes the
+      compatible is placed directly under this node, sometimes it is placed
+      in a subnode named "motherboard-bus". Sometimes the compatible includes
+      "arm,vexpress,v2?-p1" sometimes (on software models) is is just
+      "simple-bus". If the compatible is placed in the "motherboard-bus" node,
+      it is stricter and always has two compatibles.
+    type: object
+    $ref: /schemas/simple-bus.yaml
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - enum:
+                  - arm,vexpress,v2m-p1
+                  - arm,vexpress,v2p-p1
+              - const: simple-bus
+          - const: simple-bus
+
+    patternProperties:
+      '^motherboard-bus@':
+        type: object
+        description: The motherboard description provides a single "motherboard"
+          node using 2 address cells corresponding to the Static Memory Bus
+          used between the motherboard and the tile. The first cell defines the
+          Chip Select (CS) line number, the second cell address offset within
+          the CS. All interrupt lines between the motherboard and the tile
+          are active high and are described using single cell.
+        properties:
+          "#address-cells":
+            const: 2
+          "#size-cells":
+            const: 1
+          ranges: true
+
+          compatible:
+            items:
+              - enum:
+                  - arm,vexpress,v2m-p1
+                  - arm,vexpress,v2p-p1
+              - const: simple-bus
+          arm,v2m-memory-map:
+            description: This describes the memory map type.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum:
+              - rs1
+              - rs2
+
+          arm,hbi:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: This indicates the ARM HBI (Hardware Board ID), this is
+              ARM's unique board model ID, visible on the PCB's silkscreen.
+
+          arm,vexpress,site:
+            description: As Versatile Express can be configured in number of physically
+              different setups, the device tree should describe platform topology.
+              For this reason the root node and main motherboard node must define this
+              property, describing the physical location of the children nodes.
+              0 means motherboard site, while 1 and 2 are daughterboard sites, and
+              0xf means "sisterboard" which is the site containing the main CPU tile.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+
+        required:
+          - compatible
+
+        additionalProperties:
+          type: object
+
+    required:
+      - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - arm,vexpress,v2p-ca9
+              - arm,vexpress,v2p-ca5s
+              - arm,vexpress,v2p-ca15
+              - arm,vexpress,v2p-ca15_a7
+              - arm,vexpress,v2f-1xv7,ca53x2
+    then:
+      required:
+        - arm,hbi
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
new file mode 100644
index 0000000000..b8c5cacb09
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2021 Joel Stanley, IBM Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Secure Boot Controller
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The ASPEED SoCs have a register bank for interacting with the secure boot
+  controller.
+
+properties:
+  compatible:
+    items:
+      - const: aspeed,ast2600-sbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sbc: secure-boot-controller@1e6f2000 {
+            compatible = "aspeed,ast2600-sbc";
+            reg = <0x1e6f2000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
new file mode 100644
index 0000000000..68f717670f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SoC based boards
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AST2400 based boards
+        items:
+          - enum:
+              - delta,ahe50dc-bmc
+              - facebook,galaxy100-bmc
+              - facebook,wedge100-bmc
+              - facebook,wedge40-bmc
+              - microsoft,olympus-bmc
+              - quanta,q71l-bmc
+              - tyan,palmetto-bmc
+              - yadro,vesnin-bmc
+          - const: aspeed,ast2400
+
+      - description: AST2500 based boards
+        items:
+          - enum:
+              - amd,daytonax-bmc
+              - amd,ethanolx-bmc
+              - ampere,mtjade-bmc
+              - aspeed,ast2500-evb
+              - asrock,e3c246d4i-bmc
+              - asrock,romed8hm3-bmc
+              - bytedance,g220a-bmc
+              - facebook,cmm-bmc
+              - facebook,minipack-bmc
+              - facebook,tiogapass-bmc
+              - facebook,yamp-bmc
+              - facebook,yosemitev2-bmc
+              - facebook,wedge400-bmc
+              - hxt,stardragon4800-rep2-bmc
+              - ibm,mihawk-bmc
+              - ibm,mowgli-bmc
+              - ibm,romulus-bmc
+              - ibm,swift-bmc
+              - ibm,witherspoon-bmc
+              - ingrasys,zaius-bmc
+              - inspur,fp5280g2-bmc
+              - inspur,nf5280m6-bmc
+              - inspur,on5263m5-bmc
+              - intel,s2600wf-bmc
+              - inventec,lanyang-bmc
+              - lenovo,hr630-bmc
+              - lenovo,hr855xg2-bmc
+              - portwell,neptune-bmc
+              - qcom,centriq2400-rep-bmc
+              - supermicro,x11spi-bmc
+              - tyan,s7106-bmc
+              - tyan,s8036-bmc
+              - yadro,nicole-bmc
+              - yadro,vegman-n110-bmc
+              - yadro,vegman-rx20-bmc
+              - yadro,vegman-sx20-bmc
+          - const: aspeed,ast2500
+
+      - description: AST2600 based boards
+        items:
+          - enum:
+              - ampere,mtmitchell-bmc
+              - aspeed,ast2600-evb
+              - aspeed,ast2600-evb-a1
+              - facebook,bletchley-bmc
+              - facebook,cloudripper-bmc
+              - facebook,elbert-bmc
+              - facebook,fuji-bmc
+              - facebook,greatlakes-bmc
+              - facebook,yosemite4-bmc
+              - ibm,everest-bmc
+              - ibm,rainier-bmc
+              - ibm,tacoma-bmc
+              - inventec,starscream-bmc
+              - inventec,transformer-bmc
+              - jabil,rbp-bmc
+              - qcom,dc-scm-v1-bmc
+              - quanta,s6q-bmc
+              - ufispace,ncplite-bmc
+          - const: aspeed,ast2600
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
new file mode 100644
index 0000000000..dfb8fd0891
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/atmel-at91.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91.
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+
+description: |
+  Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91rm9200
+      - items:
+          - enum:
+              - olimex,sam9-l9260
+          - enum:
+              - atmel,at91sam9260
+              - atmel,at91sam9261
+              - atmel,at91sam9263
+              - atmel,at91sam9g20
+              - atmel,at91sam9g45
+              - atmel,at91sam9n12
+              - atmel,at91sam9rl
+              - atmel,at91sam9xe
+              - atmel,at91sam9x60
+          - const: atmel,at91sam9
+
+      - items:
+          - enum:
+              - overkiz,kizboxmini-base # Overkiz kizbox Mini Base Board
+              - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
+              - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
+              - overkiz,smartkiz        # Overkiz SmartKiz Board
+              - gardena,smart-gateway-at91sam # GARDENA smart Gateway (Article No. 19000)
+          - const: atmel,at91sam9g25
+          - const: atmel,at91sam9x5
+          - const: atmel,at91sam9
+
+      - items:
+          - enum:
+              - atmel,at91sam9g15
+              - atmel,at91sam9g25
+              - atmel,at91sam9g35
+              - atmel,at91sam9x25
+              - atmel,at91sam9x35
+          - const: atmel,at91sam9x5
+          - const: atmel,at91sam9
+
+      - description: Overkiz kizbox3 board
+        items:
+          - const: overkiz,kizbox3-hs
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D27 WLSOM1
+        items:
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D27 WLSOM1 Evaluation Kit
+        items:
+          - const: microchip,sama5d27-wlsom1-ek
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - items:
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D2 Industrial Connectivity Platform
+        items:
+          - const: microchip,sama5d2-icp
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAM9X60 Evaluation Boards
+        items:
+          - enum:
+              - microchip,sam9x60ek
+              - microchip,sam9x60-curiosity
+          - const: microchip,sam9x60
+          - const: atmel,at91sam9
+
+      - description: Nattis v2 board with Natte v2 power board
+        items:
+          - const: axentia,nattis-2
+          - const: axentia,natte-2
+          - const: axentia,linea
+          - const: atmel,sama5d31
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - description: TSE-850 v3 board
+        items:
+          - const: axentia,tse850v3
+          - const: axentia,linea
+          - const: atmel,sama5d31
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - items:
+          - const: axentia,linea
+          - const: atmel,sama5d31
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - description: Overkiz kizbox2 board with two heads
+        items:
+          - const: overkiz,kizbox2-2
+          - const: atmel,sama5d31
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D3 Ethernet Development System Board
+        items:
+          - const: microchip,sama5d3-eds
+          - const: atmel,sama5d36
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - description: CalAmp LMU5000 board
+        items:
+          - const: calamp,lmu5000
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
+      - description: Exegin Q5xR5 board
+        items:
+          - const: exegin,q5xr5
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
+      - items:
+          - enum:
+              - atmel,sama5d31
+              - atmel,sama5d33
+              - atmel,sama5d34
+              - atmel,sama5d35
+              - atmel,sama5d36
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - items:
+          - enum:
+              - atmel,sama5d41
+              - atmel,sama5d42
+              - atmel,sama5d43
+              - atmel,sama5d44
+          - const: atmel,sama5d4
+          - const: atmel,sama5
+
+      - items:
+          - const: microchip,sama7g5ek # SAMA7G5 Evaluation Kit
+          - const: microchip,sama7g5
+          - const: microchip,sama7
+
+      - description: Microchip LAN9662 Evaluation Boards.
+        items:
+          - enum:
+              - microchip,lan9662-pcb8291
+              - microchip,lan9662-pcb8309
+          - const: microchip,lan9662
+          - const: microchip,lan966
+
+      - description: Microchip LAN9668 PCB8290 Evaluation Board.
+        items:
+          - const: microchip,lan9668-pcb8290
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
+      - description: Kontron KSwitch D10 MMT series
+        items:
+          - enum:
+              - kontron,kswitch-d10-mmt-8g
+              - kontron,kswitch-d10-mmt-6g-2gs
+          - const: kontron,s1921
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
+      - items:
+          - enum:
+              - atmel,sams70j19
+              - atmel,sams70j20
+              - atmel,sams70j21
+              - atmel,sams70n19
+              - atmel,sams70n20
+              - atmel,sams70n21
+              - atmel,sams70q19
+              - atmel,sams70q20
+              - atmel,sams70q21
+          - const: atmel,sams70
+          - const: atmel,samv7
+
+      - items:
+          - enum:
+              - atmel,samv70j19
+              - atmel,samv70j20
+              - atmel,samv70n19
+              - atmel,samv70n20
+              - atmel,samv70q19
+              - atmel,samv70q20
+          - const: atmel,samv70
+          - const: atmel,samv7
+
+      - items:
+          - enum:
+              - atmel,samv71j19
+              - atmel,samv71j20
+              - atmel,samv71j21
+              - atmel,samv71n19
+              - atmel,samv71n20
+              - atmel,samv71n21
+              - atmel,samv71q19
+              - atmel,samv71q20
+              - atmel,samv71q21
+          - const: atmel,samv71
+          - const: atmel,samv7
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
new file mode 100644
index 0000000000..67a66bf748
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -0,0 +1,97 @@
+Atmel system registers
+
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
+- reg : Should contain registers location and length
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+  shared across all System Controller members.
+
+PIT64B Timer required properties:
+- compatible: Should be "microchip,sam9x60-pit64b"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for PIT64B timer
+- clocks: Should contain the available clock sources for PIT64B timer.
+
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+  shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+			"atmel,at91sam9260-sdramc",
+			"atmel,at91sam9g45-ddramc",
+			"atmel,sama5d3-ddramc",
+			"microchip,sam9x60-ddramc",
+			"microchip,sama7g5-uddrc"
+- reg: Should contain registers location and length
+
+Examples:
+
+	ramc0: ramc@ffffe800 {
+		compatible = "atmel,at91sam9g45-ddramc";
+		reg = <0xffffe800 0x200>;
+	};
+
+RAMC PHY Controller required properties:
+- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
+- reg: Should contain registers location and length
+
+Example:
+
+	ddr3phy: ddr3phy@e3804000 {
+		compatible = "microchip,sama7g5-ddr3phy", "syscon";
+		reg = <0xe3804000 0x1000>;
+};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+	"atmel,<chip>-sfrbu", "syscon"
+  <chip> can be "sama5d3", "sama5d4" or "sama5d2".
+  It also can be "microchip,sam9x60-sfr", "syscon".
+- reg: Should contain registers location and length
+
+	sfr@f0038000 {
+		compatible = "atmel,sama5d3-sfr", "syscon";
+		reg = <0xf0038000 0x60>;
+	};
+
+Security Module (SECUMOD)
+
+The Security Module macrocell provides all necessary secure functions to avoid
+voltage, temperature, frequency and mechanical attacks on the chip. It also
+embeds secure memories that can be scrambled.
+
+The Security Module also offers the PIOBU pins which can be used as GPIO pins.
+Note that they maintain their voltage during Backup/Self-refresh.
+
+required properties:
+- compatible: Should be "atmel,<chip>-secumod", "syscon".
+  <chip> can be "sama5d2".
+- reg: Should contain registers location and length
+- gpio-controller:	Marks the port as GPIO controller.
+- #gpio-cells:		There are 2. The pin number is the
+			first, the second represents additional
+			parameters such as GPIO_ACTIVE_HIGH/LOW.
+
+
+	secumod@fc040000 {
+		compatible = "atmel,sama5d2-secumod", "syscon";
+		reg = <0xfc040000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/axis.txt b/Documentation/devicetree/bindings/arm/axis.txt
new file mode 100644
index 0000000000..ae345e1c8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axis.txt
@@ -0,0 +1,29 @@
+Axis Communications AB
+ARTPEC series SoC Device Tree Bindings
+
+ARTPEC-6 ARM SoC
+================
+
+Required root node properties:
+- compatible = "axis,artpec6";
+
+ARTPEC-6 System Controller
+--------------------------
+
+The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
+and resets.
+
+Required properties:
+- compatible: "axis,artpec6-syscon", "syscon"
+- reg: Address and length of the register bank.
+
+Example:
+	syscon {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+ARTPEC-6 Development board:
+---------------------------
+Required root node properties:
+- compatible = "axis,artpec6-dev-board", "axis,artpec6";
diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml
new file mode 100644
index 0000000000..d60907e43e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/axxia.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/axxia.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axxia AXM55xx
+
+maintainers:
+  - Anders Berg <anders.berg@lsi.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    description: LSI AXM5516 Validation board (Amarillo)
+    items:
+      - const: lsi,axm5516-amarillo
+      - const: lsi,axm5516
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
new file mode 100644
index 0000000000..162a39dab2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711/BCM2835 Platforms
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM2711 based Boards
+        items:
+          - enum:
+              - raspberrypi,400
+              - raspberrypi,4-compute-module
+              - raspberrypi,4-model-b
+          - const: brcm,bcm2711
+
+      - description: BCM2835 based Boards
+        items:
+          - enum:
+              - raspberrypi,model-a
+              - raspberrypi,model-a-plus
+              - raspberrypi,model-b
+              - raspberrypi,model-b-i2c0  # Raspberry Pi Model B (no P5)
+              - raspberrypi,model-b-rev2
+              - raspberrypi,model-b-plus
+              - raspberrypi,compute-module
+              - raspberrypi,model-zero
+              - raspberrypi,model-zero-w
+          - const: brcm,bcm2835
+
+      - description: BCM2836 based Boards
+        items:
+          - enum:
+              - raspberrypi,2-model-b
+          - const: brcm,bcm2836
+
+      - description: BCM2837 based Boards
+        items:
+          - enum:
+              - raspberrypi,3-model-a-plus
+              - raspberrypi,3-model-b
+              - raspberrypi,3-model-b-plus
+              - raspberrypi,3-compute-module
+              - raspberrypi,3-compute-module-lite
+              - raspberrypi,model-zero-2-w
+          - const: brcm,bcm2837
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
new file mode 100644
index 0000000000..f2bcac0096
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM11351
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm28155-ap
+      - const: brcm,bcm11351
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
new file mode 100644
index 0000000000..cf4e254e32
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm21664-garnet
+      - const: brcm,bcm21664
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
new file mode 100644
index 0000000000..eafec29ba7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm23550-sparrow
+      - const: brcm,bcm23550
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
new file mode 100644
index 0000000000..4cc4e67546
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4708
+
+description:
+  Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
+  on the iProc architecture (Northstar).
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Hauke Mehrtens <hauke@hauke-m.de>
+  - Rafal Milecki <zajec5@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM4708 based boards
+        items:
+          - enum:
+              - asus,rt-ac56u
+              - asus,rt-ac68u
+              - buffalo,wzr-1166dhp
+              - buffalo,wzr-1166dhp2
+              - buffalo,wzr-1750dhp
+              - linksys,ea6300-v1
+              - linksys,ea6500-v2
+              - luxul,xap-1510-v1
+              - luxul,xwc-1000
+              - netgear,r6250-v1
+              - netgear,r6300-v2
+              - smartrg,sr400ac
+              - brcm,bcm94708
+          - const: brcm,bcm4708
+
+      - description: BCM47081 based boards
+        items:
+          - enum:
+              - asus,rt-n18u
+              - buffalo,wzr-600dhp2
+              - buffalo,wzr-900dhp
+              - luxul,xap-1410-v1
+              - luxul,xwr-1200-v1
+              - tplink,archer-c5-v2
+          - const: brcm,bcm47081
+          - const: brcm,bcm4708
+
+      - description: BCM4709 based boards
+        items:
+          - enum:
+              - asus,rt-ac87u
+              - buffalo,wxr-1900dhp
+              - linksys,ea9200
+              - netgear,r7000
+              - netgear,r8000
+              - tplink,archer-c9-v1
+              - brcm,bcm94709
+          - const: brcm,bcm4709
+          - const: brcm,bcm4708
+
+      - description: BCM47094 based boards
+        items:
+          - enum:
+              - asus,rt-ac3100
+              - asus,rt-ac88u
+              - dlink,dir-885l
+              - dlink,dir-890l
+              - linksys,panamera
+              - luxul,abr-4500-v1
+              - luxul,xap-1610-v1
+              - luxul,xbr-4500-v1
+              - luxul,xwc-2000-v1
+              - luxul,xwr-3100-v1
+              - luxul,xwr-3150-v1
+              - netgear,r8500
+              - phicomm,k3
+          - const: brcm,bcm47094
+          - const: brcm,bcm4708
+
+      - description: BCM53012 based boards
+        items:
+          - enum:
+              - brcm,bcm953012er
+              - brcm,bcm953012hr
+              - brcm,bcm953012k
+          - const: brcm,bcm53012
+          - const: brcm,bcm4708
+
+      - description: BCM53015 based boards
+        items:
+          - enum:
+              - meraki,mr26
+          - const: brcm,bcm53015
+          - const: brcm,bcm4708
+
+      - description: BCM53016 based boards
+        items:
+          - enum:
+              - dlink,dwl-8610ap
+              - meraki,mr32
+          - const: brcm,bcm53016
+          - const: brcm,bcm4708
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml
new file mode 100644
index 0000000000..81b9a4a641
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm53573.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm53573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53573 SoCs family
+
+description:
+  Broadcom BCM53573 / BCM47189 Wi-Fi SoCs derived from Northstar.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM53573 based boards
+        items:
+          - enum:
+              - tenda,ac6-v1
+              - tenda,w15e-v1
+          - const: brcm,bcm53573
+
+      - description: BCM47189 based boards
+        items:
+          - enum:
+              - brcm,bcm947189acdbmr
+              - luxul,xap-810-v1
+              - luxul,xap-1440-v1
+              - tenda,ac9
+          - const: brcm,bcm47189
+          - const: brcm,bcm53573
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
new file mode 100644
index 0000000000..a8866c6e9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -0,0 +1,85 @@
+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"
+
+An optional Boot lookup table Device Tree node is required for secondary CPU
+initialization as well as a 'resets' phandle to the correct PMB controller as
+defined in reset/brcm,bcm63138-pmb.txt for this secondary CPU, and an
+'enable-method' property.
+
+Required properties for the Boot lookup table node:
+- compatible: should be "brcm,bcm63138-bootlut"
+- reg: register base address and length for the Boot Lookup table
+
+Optional properties for the primary CPU node:
+- enable-method: should be "brcm,bcm63138"
+
+Optional properties for the secondary CPU node:
+- enable-method: should be "brcm,bcm63138"
+- resets: phandle to the relevant PMB controller, one integer indicating the internal
+  bus number, and a second integer indicating the address of the CPU in the PMB
+  internal bus number.
+
+Example:
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			...
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			...
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	bootlut: bootlut@8000 {
+		compatible = "brcm,bcm63138-bootlut";
+		reg = <0x8000 0x50>;
+	};
+
+=======
+reboot
+------
+Two nodes are required for software reboot: a timer node and a syscon-reboot node.
+
+Timer node:
+
+- compatible: Must be "brcm,bcm6328-timer", "syscon"
+- reg: Register base address and length
+
+Syscon reboot node:
+
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
+detailed list of properties, the two values defined below are specific to the
+BCM6328-style timer:
+
+- offset: Should be 0x34 to denote the offset of the TIMER_WD_TIMER_RESET register
+  from the beginning of the TIMER block
+- mask: Should be 1 for the SoftRst bit.
+
+Example:
+
+	timer: timer@80 {
+		compatible = "brcm,bcm6328-timer", "syscon";
+		reg = <0x80 0x3c>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&timer>;
+		offset = <0x34>;
+		mask = <0x1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
new file mode 100644
index 0000000000..07892cbdd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC
+
+description:
+  Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
+  chips that can be used as home gateway, router and WLAN AP for residential,
+  enterprise and carrier applications.
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Anand Gore <anand.gore@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM47622 based boards
+        items:
+          - enum:
+              - brcm,bcm947622
+          - const: brcm,bcm47622
+          - const: brcm,bcmbca
+
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - brcm,bcm94908
+              - netgear,raxe500
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4912 based boards
+        items:
+          - enum:
+              - asus,gt-ax6000
+              - brcm,bcm94912
+          - const: brcm,bcm4912
+          - const: brcm,bcmbca
+
+      - description: BCM63138 based boards
+        items:
+          - enum:
+              - brcm,bcm963138
+              - brcm,BCM963138DVT
+          - const: brcm,bcm63138
+          - const: brcm,bcmbca
+
+      - description: BCM63146 based boards
+        items:
+          - enum:
+              - brcm,bcm963146
+          - const: brcm,bcm63146
+          - const: brcm,bcmbca
+
+      - description: BCM63148 based boards
+        items:
+          - enum:
+              - brcm,bcm963148
+          - const: brcm,bcm63148
+          - const: brcm,bcmbca
+
+      - description: BCM63158 based boards
+        items:
+          - enum:
+              - brcm,bcm963158
+          - const: brcm,bcm63158
+          - const: brcm,bcmbca
+
+      - description: BCM63178 based boards
+        items:
+          - enum:
+              - brcm,bcm963178
+          - const: brcm,bcm63178
+          - const: brcm,bcmbca
+
+      - description: BCM6756 based boards
+        items:
+          - enum:
+              - brcm,bcm96756
+          - const: brcm,bcm6756
+          - const: brcm,bcmbca
+
+      - description: BCM6813 based boards
+        items:
+          - enum:
+              - brcm,bcm96813
+          - const: brcm,bcm6813
+          - const: brcm,bcmbca
+
+      - description: BCM6846 based boards
+        items:
+          - enum:
+              - brcm,bcm96846
+          - const: brcm,bcm6846
+          - const: brcm,bcmbca
+
+      - description: BCM6855 based boards
+        items:
+          - enum:
+              - brcm,bcm96855
+          - const: brcm,bcm6855
+          - const: brcm,bcmbca
+
+      - description: BCM6856 based boards
+        items:
+          - enum:
+              - brcm,bcm96856
+          - const: brcm,bcm6856
+          - const: brcm,bcmbca
+
+      - description: BCM6858 based boards
+        items:
+          - enum:
+              - brcm,bcm96858
+          - const: brcm,bcm6858
+          - const: brcm,bcmbca
+
+      - description: BCM6878 based boards
+        items:
+          - enum:
+              - brcm,bcm96878
+          - const: brcm,bcm6878
+          - const: brcm,bcmbca
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
new file mode 100644
index 0000000000..071421dbc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -0,0 +1,258 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+    - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+    #address-cells = <2>;
+    #size-cells = <2>;
+    model = "Broadcom STB (bcm7445)";
+    compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+    - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-cpu-biu-ctrl",
+		  "brcm,brcmstb-cpu-biu-ctrl",
+		  "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+cpu-biu-ctrl node
+-------------------
+SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a
+specific Bus Interface Unit (BIU) block which controls and interfaces the CPU
+complex to the different Memory Controller Ports (MCP), one per memory
+controller (MEMC). This BIU block offers a feature called Write Pairing which
+consists in collapsing two adjacent cache lines into a single (bursted) write
+transaction towards the memory controller (MEMC) to maximize write bandwidth.
+
+Required properties:
+
+    - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"
+
+Optional properties:
+
+    - brcm,write-pairing:
+	Boolean property, which when present indicates that the chip
+	supports write-pairing.
+
+example:
+    rdb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "simple-bus";
+        ranges = <0 0x00 0xf0000000 0x1000000>;
+
+        sun_top_ctrl: syscon@404000 {
+            compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+            reg = <0x404000 0x51c>;
+        };
+
+        hif_cpubiuctrl: syscon@3e2400 {
+            compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon";
+            reg = <0x3e2400 0x5b4>;
+            brcm,write-pairing;
+        };
+
+        hif_continuation: syscon@452000 {
+            compatible = "brcm,bcm7445-hif-continuation", "syscon";
+            reg = <0x452000 0x100>;
+        };
+    };
+
+Nodes that allow for support of SMP initialization and reboot are required:
+
+smpboot
+-------
+Required properties:
+
+    - compatible
+        The string "brcm,brcmstb-smpboot".
+
+    - syscon-cpu
+        A phandle / integer array property which lets the BSP know the location
+        of certain CPU power-on registers.
+
+        The layout of the property is as follows:
+            o a phandle to the "hif_cpubiuctrl" syscon node
+            o offset to the base CPU power zone register
+            o offset to the base CPU reset register
+
+    - syscon-cont
+        A phandle pointing to the syscon node which describes the CPU boot
+        continuation registers.
+            o a phandle to the "hif_continuation" syscon node
+
+example:
+    smpboot {
+        compatible = "brcm,brcmstb-smpboot";
+        syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+        syscon-cont = <&hif_continuation>;
+    };
+
+reboot
+-------
+Required properties
+
+    - compatible
+        The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
+        the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
+        chips with the old SUN_TOP_CTRL interface.
+
+    - syscon
+        A phandle / integer array that points to the syscon node which describes
+        the general system reset registers.
+            o a phandle to "sun_top_ctrl"
+            o offset to the "reset source enable" register
+            o offset to the "software master reset" register
+
+example:
+    reboot {
+        compatible = "brcm,brcmstb-reboot";
+        syscon = <&sun_top_ctrl 0x304 0x308>;
+    };
+
+
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-aon-ctrl"
+- reg            : the register start and length for the AON CTRL block
+
+Example:
+
+aon-ctrl@410000 {
+	compatible = "brcm,brcmstb-aon-ctrl";
+	reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY). See
+the example device tree snippet below.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-memc" and "simple-bus"
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible     : should contain one of these
+	"brcm,brcmstb-ddr-phy-v71.1"
+	"brcm,brcmstb-ddr-phy-v72.0"
+	"brcm,brcmstb-ddr-phy-v225.1"
+	"brcm,brcmstb-ddr-phy-v240.1"
+	"brcm,brcmstb-ddr-phy-v240.2"
+
+- reg            : the DDR PHY register range
+
+== DDR SHIMPHY
+
+Control registers for this memory controller's DDR SHIMPHY.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
+- reg            : the DDR SHIMPHY register range
+
+== MEMC DDR control
+
+Sequencer DRAM parameters and control registers. Used for Self-Refresh
+Power-Down (SRPD), among other things.
+
+See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a
+full list of supported compatible strings and properties.
+
+Example:
+
+memory_controllers {
+	ranges;
+	compatible = "simple-bus";
+
+	memc@0 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1106000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1106000 0x21c>;
+		};
+
+		shimphy@f1108000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1108000 0xe4>;
+		};
+
+		memc-ddr@f1102000 {
+			reg = <0xf1102000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+
+	memc@1 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1186000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1186000 0x21c>;
+		};
+
+		shimphy@f1188000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1188000 0xe4>;
+		};
+
+		memc-ddr@f1182000 {
+			reg = <0xf1182000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+
+	memc@2 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1206000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1206000 0x21c>;
+		};
+
+		shimphy@f1208000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1208000 0xe4>;
+		};
+
+		memc-ddr@f1202000 {
+			reg = <0xf1202000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
new file mode 100644
index 0000000000..a0a3f32db5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11300
+          - brcm,bcm11320
+          - brcm,bcm11350
+          - brcm,bcm11360
+          - brcm,bcm58300
+          - brcm,bcm58302
+          - brcm,bcm58303
+          - brcm,bcm58305
+      - const: brcm,cygnus
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
new file mode 100644
index 0000000000..cc6add0e93
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Hurricane 2
+
+description:
+  Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
+  are based on Broadcom's iProc SoC architecture and feature a single core Cortex
+  A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
+  flash and a PCIe attached integrated switching engine.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - ubnt,unifi-switch8
+      - const: brcm,bcm53342
+      - const: brcm,hr2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
new file mode 100644
index 0000000000..6696598eca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom North Star 2 (NS2)
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,ns2-svk
+          - brcm,ns2-xmc
+      - const: brcm,ns2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
new file mode 100644
index 0000000000..a43b2d4d93
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Plus
+
+description:
+  Broadcom Northstar Plus family of SoCs are used for switching control
+  and management applications as well as residential router/gateway
+  applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+  several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+  DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+  SATA and several other IO controllers.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM58522 based boards
+        items:
+          - enum:
+              - brcm,bcm958522er
+          - const: brcm,bcm58522
+          - const: brcm,nsp
+
+      - description: BCM58525 based boards
+        items:
+          - enum:
+              - brcm,bcm958525er
+              - brcm,bcm958525xmc
+          - const: brcm,bcm58525
+          - const: brcm,nsp
+
+      - description: BCM58535 based boards
+        items:
+          - const: brcm,bcm58535
+          - const: brcm,nsp
+
+      - description: BCM58622 based boards
+        items:
+          - enum:
+              - brcm,bcm958622hr
+          - const: brcm,bcm58622
+          - const: brcm,nsp
+
+      - description: BCM58623 based boards
+        items:
+          - enum:
+              - brcm,bcm958623hr
+          - const: brcm,bcm58623
+          - const: brcm,nsp
+
+      - description: BCM58625 based boards
+        items:
+          - enum:
+              - brcm,bcm958625hr
+              - brcm,bcm958625k
+              - meraki,mx64
+              - meraki,mx64-a0
+              - meraki,mx64w
+              - meraki,mx64w-a0
+              - meraki,mx65
+              - meraki,mx65w
+          - const: brcm,bcm58625
+          - const: brcm,nsp
+
+      - description: BCM88312 based boards
+        items:
+          - enum:
+              - brcm,bcm988312hr
+          - const: brcm,bcm88312
+          - const: brcm,nsp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
new file mode 100644
index 0000000000..c6ccb78aab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm958742k
+          - brcm,bcm958742t
+          - brcm,bcm958802a802x
+      - const: brcm,stingray
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
new file mode 100644
index 0000000000..3f441352fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Vulcan
+
+maintainers:
+  - Robert Richter <rrichter@marvell.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,vulcan-eval
+          - cavium,thunderx2-cn9900
+      - const: brcm,vulcan-soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
new file mode 100644
index 0000000000..39e3c248f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi VideoCore firmware driver
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: raspberrypi,bcm2835-firmware
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: raspberrypi,bcm2835-firmware
+      - const: simple-mfd
+
+  mboxes:
+    maxItems: 1
+
+  clocks:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-clocks
+
+      "#clock-cells":
+        const: 1
+        description: >
+          The argument is the ID of the clocks contained by the
+          firmware messages.
+
+    required:
+      - compatible
+      - "#clock-cells"
+
+  reset:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-reset
+
+      "#reset-cells":
+        const: 1
+        description: >
+          The argument is the ID of the firmware reset line to affect.
+
+    required:
+      - compatible
+      - "#reset-cells"
+
+  pwm:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-poe-pwm
+
+      "#pwm-cells":
+        # See pwm.yaml in this directory for a description of the cells format.
+        const: 2
+
+    required:
+      - compatible
+      - "#pwm-cells"
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+        compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+        mboxes = <&mailbox>;
+
+        firmware_clocks: clocks {
+            compatible = "raspberrypi,firmware-clocks";
+            #clock-cells = <1>;
+        };
+
+        reset: reset {
+            compatible = "raspberrypi,firmware-reset";
+            #reset-cells = <1>;
+        };
+
+        pwm: pwm {
+            compatible = "raspberrypi,firmware-poe-pwm";
+            #pwm-cells = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
new file mode 100644
index 0000000000..55a5a570b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bitmain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain platform
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    items:
+      - enum:
+          - bitmain,sophon-edge
+      - const: bitmain,bm1880
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml
new file mode 100644
index 0000000000..3e9f5e1d86
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Platforms
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+description: |+
+  Bindings for boards with Calxeda Cortex-A9 based ECX-1000 (Highbank) SOC
+  or Cortex-A15 based ECX-2000 SOCs
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - calxeda,highbank
+          - calxeda,ecx-2000
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml
new file mode 100644
index 0000000000..dfdc97083e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/hb-sregs.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/hb-sregs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank system registers
+
+description: |
+  The Calxeda Highbank system has a block of MMIO registers controlling
+  several generic system aspects. Those can be used to control some power
+  management, they also contain some gate and PLL clocks.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-sregs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@fff3c000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0xfff3c000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
new file mode 100644
index 0000000000..a9fe01238a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/calxeda/l2ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank L2 cache ECC
+
+description: |
+  Binding for the Calxeda Highbank L2 cache controller ECC device.
+  This does not cover the actual L2 cache controller control registers,
+  but just the error reporting functionality.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: "calxeda,hb-sregs-l2-ecc"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: single bit error interrupt
+      - description: double bit error interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@fff3c200 {
+        compatible = "calxeda,hb-sregs-l2-ecc";
+        reg = <0xfff3c200 0x100>;
+        interrupts = <0 71 4>, <0 72 4>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder.txt b/Documentation/devicetree/bindings/arm/cavium-thunder.txt
new file mode 100644
index 0000000000..6f63a58669
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cavium-thunder.txt
@@ -0,0 +1,10 @@
+Cavium Thunder platform device tree bindings
+--------------------------------------------
+
+Boards with Cavium's Thunder SoC shall have following properties.
+
+Root Node
+---------
+Required root node properties:
+
+  - compatible = "cavium,thunder-88xx";
diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
new file mode 100644
index 0000000000..dc5dd65cbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt
@@ -0,0 +1,8 @@
+Cavium ThunderX2 CN99XX platform tree bindings
+----------------------------------------------
+
+Boards with Cavium ThunderX2 CN99XX SoC shall have the root property:
+  compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+
+These SoC uses the "cavium,thunder2" core which will be compatible
+with "brcm,vulcan".
diff --git a/Documentation/devicetree/bindings/arm/cci-control-port.yaml b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
new file mode 100644
index 0000000000..c29d250a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cci-control-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CCI Interconnect Bus Masters
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: |
+  Masters in the device tree connected to a CCI port (inclusive of CPUs
+  and their cpu nodes).
+
+select: true
+
+properties:
+  cci-control-port:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+additionalProperties: true
+
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            cci-control-port = <&cci_control1>;
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
new file mode 100644
index 0000000000..35e5afb6d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/al,alpine-smp
@@ -0,0 +1,80 @@
+========================================================
+Secondary CPU enable-method "al,alpine-smp" binding
+========================================================
+
+This document describes the "al,alpine-smp" method for
+enabling secondary CPUs. To apply to all CPUs, a single
+"al,alpine-smp" enable method should be defined in the
+"cpus" node.
+
+Enable method name:	"al,alpine-smp"
+Compatible machines:	"al,alpine"
+Compatible CPUs:	"arm,cortex-a15"
+Related properties:	(none)
+
+Note:
+This enable method requires valid nodes compatible with
+"al,alpine-cpu-resume" and "al,alpine-nb-service".
+
+
+* Alpine CPU resume registers
+
+The CPU resume register are used to define required resume address after
+reset.
+
+Properties:
+- compatible : Should contain "al,alpine-cpu-resume".
+- reg : Offset and length of the register set for the device
+
+
+* Alpine System-Fabric Service Registers
+
+The System-Fabric Service Registers allow various operation on CPU and
+system fabric, like powering CPUs off.
+
+Properties:
+- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
+- reg : Offset and length of the register set for the device
+
+
+Example:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	enable-method = "al,alpine-smp";
+
+	cpu@0 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <0>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <1>;
+	};
+
+	cpu@2 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <2>;
+	};
+
+	cpu@3 {
+		compatible = "arm,cortex-a15";
+		device_type = "cpu";
+		reg = <3>;
+	};
+};
+
+cpu_resume {
+	compatible = "al,alpine-cpu-resume";
+	reg = <0xfbff5ed0 0x30>;
+};
+
+nb_service {
+        compatible = "al,alpine-sysfabric-service", "syscon";
+        reg = <0xfb070000 0x10000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
new file mode 100644
index 0000000000..cd236b727e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name:	"marvell,berlin-smp"
+Compatible machines:	"marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs:	"marvell,pj4b" and "arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+--
+[1] arm/marvell,berlin.txt
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
new file mode 100644
index 0000000000..8e043301e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
@@ -0,0 +1,42 @@
+=========================================================
+Secondary CPU enable-method "nuvoton,npcm750-smp" binding
+=========================================================
+
+To apply to all CPUs, a single "nuvoton,npcm750-smp" enable method should be
+defined in the "cpus" node.
+
+Enable method name:	"nuvoton,npcm750-smp"
+Compatible machines:	"nuvoton,npcm750"
+Compatible CPUs:	"arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"nuvoton,npcm750-gcr".
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "nuvoton,npcm750-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			clocks = <&clk NPCM7XX_CLK_CPU>;
+			clock-names = "clk_cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
new file mode 100644
index 0000000000..0d17cbad97
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -0,0 +1,578 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CPUs
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: |+
+  The device tree allows to describe the layout of CPUs in a system through
+  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+  defining properties for every cpu.
+
+  Bindings for CPU nodes follow the Devicetree Specification, available from:
+
+  https://www.devicetree.org/specifications/
+
+  with updates for 32-bit and 64-bit ARM systems provided in this document.
+
+  ================================
+  Convention used in this document
+  ================================
+
+  This document follows the conventions described in the Devicetree
+  Specification, with the addition:
+
+  - square brackets define bitfields, eg reg[7:0] value of the bitfield in
+    the reg property contained in bits 7 down to 0
+
+  =====================================
+  cpus and cpu node bindings definition
+  =====================================
+
+  The ARM architecture, in accordance with the Devicetree Specification,
+  requires the cpus and cpu nodes to be present and contain the properties
+  described below.
+
+properties:
+  reg:
+    maxItems: 1
+    description: |
+      Usage and definition depend on ARM architecture version and
+      configuration:
+
+      On uniprocessor ARM architectures previous to v7
+      this property is required and must be set to 0.
+
+      On ARM 11 MPcore based systems this property is
+        required and matches the CPUID[11:0] register bits.
+
+        Bits [11:0] in the reg cell must be set to
+        bits [11:0] in CPU ID register.
+
+        All other bits in the reg cell must be set to 0.
+
+      On 32-bit ARM v7 or later systems this property is
+        required and matches the CPU MPIDR[23:0] register
+        bits.
+
+        Bits [23:0] in the reg cell must be set to
+        bits [23:0] in MPIDR.
+
+        All other bits in the reg cell must be set to 0.
+
+      On ARM v8 64-bit systems this property is required
+        and matches the MPIDR_EL1 register affinity bits.
+
+        * If cpus node's #address-cells property is set to 2
+
+          The first reg cell bits [7:0] must be set to
+          bits [39:32] of MPIDR_EL1.
+
+          The second reg cell bits [23:0] must be set to
+          bits [23:0] of MPIDR_EL1.
+
+        * If cpus node's #address-cells property is set to 1
+
+          The reg cell bits [23:0] must be set to bits [23:0]
+          of MPIDR_EL1.
+
+      All other bits in the reg cells must be set to 0.
+
+  compatible:
+    enum:
+      - apple,avalanche
+      - apple,blizzard
+      - apple,icestorm
+      - apple,firestorm
+      - arm,arm710t
+      - arm,arm720t
+      - arm,arm740t
+      - arm,arm7ej-s
+      - arm,arm7tdmi
+      - arm,arm7tdmi-s
+      - arm,arm9es
+      - arm,arm9ej-s
+      - arm,arm920t
+      - arm,arm922t
+      - arm,arm925
+      - arm,arm926e-s
+      - arm,arm926ej-s
+      - arm,arm940t
+      - arm,arm946e-s
+      - arm,arm966e-s
+      - arm,arm968e-s
+      - arm,arm9tdmi
+      - arm,arm1020e
+      - arm,arm1020t
+      - arm,arm1022e
+      - arm,arm1026ej-s
+      - arm,arm1136j-s
+      - arm,arm1136jf-s
+      - arm,arm1156t2-s
+      - arm,arm1156t2f-s
+      - arm,arm1176jzf
+      - arm,arm1176jz-s
+      - arm,arm1176jzf-s
+      - arm,arm11mpcore
+      - arm,armv8 # Only for s/w models
+      - arm,cortex-a5
+      - arm,cortex-a7
+      - arm,cortex-a8
+      - arm,cortex-a9
+      - arm,cortex-a12
+      - arm,cortex-a15
+      - arm,cortex-a17
+      - arm,cortex-a32
+      - arm,cortex-a34
+      - arm,cortex-a35
+      - arm,cortex-a53
+      - arm,cortex-a55
+      - arm,cortex-a57
+      - arm,cortex-a65
+      - arm,cortex-a72
+      - arm,cortex-a73
+      - arm,cortex-a75
+      - arm,cortex-a76
+      - arm,cortex-a77
+      - arm,cortex-a78
+      - arm,cortex-a78ae
+      - arm,cortex-a78c
+      - arm,cortex-a510
+      - arm,cortex-a520
+      - arm,cortex-a710
+      - arm,cortex-a715
+      - arm,cortex-a720
+      - arm,cortex-m0
+      - arm,cortex-m0+
+      - arm,cortex-m1
+      - arm,cortex-m3
+      - arm,cortex-m4
+      - arm,cortex-r4
+      - arm,cortex-r5
+      - arm,cortex-r7
+      - arm,cortex-r52
+      - arm,cortex-x1
+      - arm,cortex-x1c
+      - arm,cortex-x2
+      - arm,cortex-x3
+      - arm,cortex-x4
+      - arm,neoverse-e1
+      - arm,neoverse-n1
+      - arm,neoverse-n2
+      - arm,neoverse-v1
+      - brcm,brahma-b15
+      - brcm,brahma-b53
+      - brcm,vulcan
+      - cavium,thunder
+      - cavium,thunder2
+      - faraday,fa526
+      - intel,sa110
+      - intel,sa1100
+      - marvell,feroceon
+      - marvell,mohawk
+      - marvell,pj4a
+      - marvell,pj4b
+      - marvell,sheeva-v5
+      - marvell,sheeva-v7
+      - nvidia,tegra132-denver
+      - nvidia,tegra186-denver
+      - nvidia,tegra194-carmel
+      - qcom,krait
+      - qcom,kryo
+      - qcom,kryo240
+      - qcom,kryo250
+      - qcom,kryo260
+      - qcom,kryo280
+      - qcom,kryo360
+      - qcom,kryo385
+      - qcom,kryo468
+      - qcom,kryo485
+      - qcom,kryo560
+      - qcom,kryo570
+      - qcom,kryo660
+      - qcom,kryo685
+      - qcom,kryo780
+      - qcom,scorpion
+
+  enable-method:
+    $ref: /schemas/types.yaml#/definitions/string
+    oneOf:
+      # On ARM v8 64-bit this property is required
+      - enum:
+          - psci
+          - spin-table
+      # On ARM 32-bit systems this property is optional
+      - enum:
+          - actions,s500-smp
+          - allwinner,sun6i-a31
+          - allwinner,sun8i-a23
+          - allwinner,sun9i-a80-smp
+          - allwinner,sun8i-a83t-smp
+          - amlogic,meson8-smp
+          - amlogic,meson8b-smp
+          - arm,realview-smp
+          - aspeed,ast2600-smp
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm2836-smp
+          - brcm,bcm63138
+          - brcm,bcm-nsp-smp
+          - brcm,brahma-b15
+          - marvell,armada-375-smp
+          - marvell,armada-380-smp
+          - marvell,armada-390-smp
+          - marvell,armada-xp-smp
+          - marvell,98dx3236-smp
+          - marvell,mmp3-smp
+          - mediatek,mt6589-smp
+          - mediatek,mt81xx-tz-smp
+          - qcom,gcc-msm8660
+          - qcom,kpss-acc-v1
+          - qcom,kpss-acc-v2
+          - qcom,msm8226-smp
+          - qcom,msm8909-smp
+          # Only valid on ARM 32-bit, see above for ARM v8 64-bit
+          - qcom,msm8916-smp
+          - renesas,apmu
+          - renesas,r9a06g032-smp
+          - rockchip,rk3036-smp
+          - rockchip,rk3066-smp
+          - socionext,milbeaut-m10v-smp
+          - ste,dbx500-smp
+          - ti,am3352
+          - ti,am4372
+
+  cpu-release-addr:
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      The DT specification defines this as 64-bit always, but some 32-bit Arm
+      systems have used a 32-bit value which must be supported.
+      Required for systems that have an "enable-method"
+        property value of "spin-table".
+
+  cpu-idle-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      List of phandles to idle state nodes supported
+      by this cpu (see ./idle-states.yaml).
+
+  capacity-dmips-mhz:
+    description:
+      u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
+      DMIPS/MHz, relative to highest capacity-dmips-mhz
+      in the system.
+
+  cci-control-port: true
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the CPU  is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  performance-domains:
+    maxItems: 1
+    description:
+      List of phandles and performance domain specifiers, as defined by
+      bindings of the performance domain provider. See also
+      dvfs/performance-domain.yaml.
+
+  power-domains:
+    description:
+      List of phandles and PM domain specifiers, as defined by bindings of the
+      PM domain provider (see also ../power_domain.txt).
+
+  power-domain-names:
+    description:
+      A list of power domain name strings sorted in the same order as the
+      power-domains property.
+
+      For PSCI based platforms, the name corresponding to the index of the PSCI
+      PM domain provider, must be "psci".
+
+  qcom,saw:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the SAW* node associated with this CPU.
+
+      Required for systems that have an "enable-method" property
+      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+
+      * arm/msm/qcom,saw2.txt
+
+  qcom,acc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the ACC* node associated with this CPU.
+
+      Required for systems that have an "enable-method" property
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
+      "qcom,msm8916-smp".
+
+      * arm/msm/qcom,kpss-acc.txt
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the syscon node controlling the cpu core power domains.
+
+      Optional for systems that have an "enable-method"
+      property value of "rockchip,rk3066-smp"
+      While optional, it is the preferred way to get access to
+      the cpu-core power-domains.
+
+  secondary-boot-reg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Required for systems that have an "enable-method" property value of
+      "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
+
+      This includes the following SoCs: |
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+      The secondary-boot-reg property is a u32 value that specifies the
+      physical address of the register used to request the ROM holding pen
+      code release a secondary CPU. The value written to the register is
+      formed by encoding the target CPU id into the low bits of the
+      physical start address it should jump to.
+
+if:
+  # If the enable-method property contains one of those values
+  properties:
+    enable-method:
+      contains:
+        enum:
+          - brcm,bcm11351-cpu-method
+          - brcm,bcm23550
+          - brcm,bcm-nsp-smp
+  # and if enable-method is present
+  required:
+    - enable-method
+
+then:
+  required:
+    - secondary-boot-reg
+
+required:
+  - device_type
+  - reg
+  - compatible
+
+dependencies:
+  rockchip,pmu: [enable-method]
+
+additionalProperties: true
+
+examples:
+  - |
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a15";
+        reg = <0x0>;
+      };
+
+      cpu@1 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a15";
+        reg = <0x1>;
+      };
+
+      cpu@100 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a7";
+        reg = <0x100>;
+      };
+
+      cpu@101 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a7";
+        reg = <0x101>;
+      };
+    };
+
+  - |
+    // Example 2 (Cortex-A8 uniprocessor 32-bit system):
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a8";
+        reg = <0x0>;
+      };
+    };
+
+  - |
+    // Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        device_type = "cpu";
+        compatible = "arm,arm926ej-s";
+        reg = <0x0>;
+      };
+    };
+
+  - |
+    //  Example 4 (ARM Cortex-A57 64-bit system):
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <2>;
+
+      cpu@0 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x0>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@1 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x1>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x100>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@101 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x101>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@10000 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x10000>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@10001 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x10001>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@10100 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x10100>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@10101 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x0 0x10101>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100000000 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x0>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100000001 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x1>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100000100 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x100>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100000101 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x101>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100010000 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x10000>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100010001 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x10001>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100010100 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x10100>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+
+      cpu@100010101 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57";
+        reg = <0x1 0x10101>;
+        enable-method = "spin-table";
+        cpu-release-addr = <0 0x20000000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml
new file mode 100644
index 0000000000..0cf9ddaa52
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/digicolor.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/digicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Conexant Digicolor Platforms
+
+maintainers:
+  - Baruch Siach <baruch@tkos.co.il>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    const: cnxt,cx92755
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
new file mode 100644
index 0000000000..5d033570b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/firmware/linaro,optee-tz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OP-TEE
+
+maintainers:
+  - Jens Wiklander <jens.wiklander@linaro.org>
+
+description: |
+  OP-TEE is a piece of software using hardware features to provide a Trusted
+  Execution Environment. The security can be provided with ARM TrustZone, but
+  also by virtualization or a separate chip.
+
+  We're using "linaro" as the first part of the compatible property for
+  the reference implementation maintained by Linaro.
+
+properties:
+  $nodename:
+    const: optee
+
+  compatible:
+    const: linaro,optee-tz
+
+  interrupts:
+    maxItems: 1
+    description: |
+      This interrupt which is used to signal an event by the secure world
+      software is expected to be either a per-cpu interrupt or an
+      edge-triggered peripheral interrupt.
+
+  method:
+    enum: [smc, hvc]
+    description: |
+      The method of calling the OP-TEE Trusted OS depending on smc or hvc
+      instruction usage.
+      SMC #0, register assignments
+      or
+      HVC #0, register assignments
+      register assignments are specified in drivers/tee/optee/optee_smc.h
+
+required:
+  - compatible
+  - method
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    firmware  {
+        optee  {
+            compatible = "linaro,optee-tz";
+            method = "smc";
+            interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+
+  - |
+    firmware  {
+        optee  {
+            compatible = "linaro,optee-tz";
+            method = "hvc";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/firmware/sdei.txt b/Documentation/devicetree/bindings/arm/firmware/sdei.txt
new file mode 100644
index 0000000000..ee3f0ff498
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/sdei.txt
@@ -0,0 +1,42 @@
+* Software Delegated Exception Interface (SDEI)
+
+Firmware implementing the SDEI functions described in ARM document number
+ARM DEN 0054A ("Software Delegated Exception Interface") can be used by
+Linux to receive notification of events such as those generated by
+firmware-first error handling, or from an IRQ that has been promoted to
+a firmware-assisted NMI.
+
+The interface provides a number of API functions for registering callbacks
+and enabling/disabling events. Functions are invoked by trapping to the
+privilege level of the SDEI firmware (specified as part of the binding
+below) and passing arguments in a manner specified by the "SMC Calling
+Convention (ARM DEN 0028B):
+
+	 r0		=> 32-bit Function ID / return value
+	{r1 - r3}	=> Parameters
+
+Note that the immediate field of the trapping instruction must be set
+to #0.
+
+The SDEI_EVENT_REGISTER function registers a callback in the kernel
+text to handle the specified event number.
+
+The sdei node should be a child node of '/firmware' and have required
+properties:
+
+ - compatible    : should contain:
+	* "arm,sdei-1.0" : For implementations complying to SDEI version 1.x.
+
+ - method        : The method of calling the SDEI firmware. Permitted
+                   values are:
+	* "smc" : SMC #0, with the register assignments specified in this
+	          binding.
+	* "hvc" : HVC #0, with the register assignments specified in this
+	          binding.
+Example:
+	firmware {
+		sdei {
+			compatible	= "arm,sdei-1.0";
+			method		= "smc";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
new file mode 100644
index 0000000000..e3980b659f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trusted Foundations
+
+description: |
+  Boards that use the Trusted Foundations secure monitor can signal its
+  presence by declaring a node compatible under the /firmware/ node
+
+maintainers:
+  - Stephen Warren <swarren@nvidia.com>
+
+properties:
+  $nodename:
+    const: trusted-foundations
+
+  compatible:
+    const: tlm,trusted-foundations
+
+  tlm,version-major:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: major version number of Trusted Foundations firmware
+
+  tlm,version-minor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: minor version number of Trusted Foundations firmware
+
+required:
+  - compatible
+  - tlm,version-major
+  - tlm,version-minor
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      trusted-foundations {
+        compatible = "tlm,trusted-foundations";
+        tlm,version-major = <2>;
+        tlm,version-minor = <8>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
new file mode 100644
index 0000000000..3b26040f8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Power Management Components
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Multi-System Mode Controller (MSMC) is responsible for sequencing
+  the MCU into and out of all stop and run power modes. Specifically, it
+  monitors events to trigger transitions between power modes while
+  controlling the power, clocks, and memories of the MCU to achieve the
+  power consumption and functionality of that mode.
+
+  The WFI or WFE instruction is used to invoke a Sleep, Deep Sleep or
+  Standby modes for either Cortex family. Run, Wait, and Stop are the
+  common terms used for the primary operating modes of Kinetis
+  microcontrollers.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-smc1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smc1@40410000 {
+        compatible = "fsl,imx7ulp-smc1";
+        reg = <0x40410000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
new file mode 100644
index 0000000000..526f508cb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-sim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP System Integration Module
+
+maintainers:
+  - Anson Huang <anson.huang@nxp.com>
+
+description: |
+  The system integration module (SIM) provides system control and chip configuration
+  registers. In this module, chip revision information is located in JTAG ID register,
+  and a set of registers have been made available in DGO domain for SW use, with the
+  objective to maintain its value between system resets.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx7ulp-sim
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sim@410a3000 {
+        compatible = "fsl,imx7ulp-sim", "syscon";
+        reg = <0x410a3000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
new file mode 100644
index 0000000000..44aa3c451c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
@@ -0,0 +1,14 @@
+Freescale Vybrid Miscellaneous System Control - CPU Configuration
+
+The MSCM IP contains multiple sub modules, this binding describes the first
+block of registers which contains CPU configuration information.
+
+Required properties:
+- compatible:	"fsl,vf610-mscm-cpucfg", "syscon"
+- reg:		the register range of the MSCM CPU configuration registers
+
+Example:
+	mscm_cpucfg: cpucfg@40001000 {
+		compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+		reg = <0x40001000 0x800>;
+	}
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
new file mode 100644
index 0000000000..6dd6f39923
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
@@ -0,0 +1,30 @@
+Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+The MSCM IP contains multiple sub modules, this binding describes the second
+block of registers which control the interrupt router. The interrupt router
+allows to configure the recipient of each peripheral interrupt. Furthermore
+it controls the directed processor interrupts. The module is available in all
+Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+which comes with a Cortex-A5/Cortex-M4 combination).
+
+Required properties:
+- compatible:		"fsl,vf610-mscm-ir"
+- reg:			the register range of the MSCM Interrupt Router
+- fsl,cpucfg:		The handle to the MSCM CPU configuration node, required
+			to get the current CPU ID
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Two cells, interrupt number and cells.
+			The hardware interrupt number according to interrupt
+			assignment of the interrupt router is required.
+			Flags get passed only when using GIC as parent. Flags
+			encoding as documented by the GIC bindings.
+
+Example:
+	mscm_ir: interrupt-controller@40001800 {
+		compatible = "fsl,vf610-mscm-ir";
+		reg = <0x40001800 0x400>;
+		fsl,cpucfg = <&mscm_cpucfg>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&intc>;
+	}
diff --git a/Documentation/devicetree/bindings/arm/freescale/m4if.txt b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
new file mode 100644
index 0000000000..93bd7b867a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
@@ -0,0 +1,12 @@
+* Freescale Multi Master Multi Memory Interface (M4IF) module
+
+Required properties:
+- compatible : Should be "fsl,imx51-m4if"
+- reg : Address and length of the register set for the device
+
+Example:
+
+m4if: m4if@83fd8000 {
+	compatible = "fsl,imx51-m4if";
+	reg = <0x83fd8000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/freescale/tigerp.txt b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
new file mode 100644
index 0000000000..19e2aad63d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
@@ -0,0 +1,12 @@
+* Freescale Tigerp platform module
+
+Required properties:
+- compatible : Should be "fsl,imx51-tigerp"
+- reg : Address and length of the register set for the device
+
+Example:
+
+tigerp: tigerp@83fa0000 {
+	compatible = "fsl,imx51-tigerp";
+	reg = <0x83fa0000 0x28>;
+};
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
new file mode 100644
index 0000000000..9450b2c8a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -0,0 +1,1461 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/fsl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Platforms
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: i.MX1 based Boards
+        items:
+          - enum:
+              - armadeus,imx1-apf9328
+              - fsl,imx1ads
+          - const: fsl,imx1
+
+      - description: i.MX23 based Boards
+        items:
+          - enum:
+              - fsl,imx23-evk
+              - olimex,imx23-olinuxino
+          - const: fsl,imx23
+
+      - description: i.MX25 Product Development Kit
+        items:
+          - enum:
+              - fsl,imx25-pdk
+              - karo,imx25-tx25
+          - const: fsl,imx25
+
+      - description: i.MX25 Eukrea CPUIMX25 Boards
+        items:
+          - enum:
+              - eukrea,mbimxsd25-baseboard   # Eukrea MBIMXSD25
+          - const: eukrea,cpuimx25
+          - const: fsl,imx25
+
+      - description: i.MX25 Eukrea MBIMXSD25 Boards
+        items:
+          - enum:
+              - eukrea,mbimxsd25-baseboard-cmo-qvga
+              - eukrea,mbimxsd25-baseboard-dvi-svga
+              - eukrea,mbimxsd25-baseboard-dvi-vga
+          - const: eukrea,mbimxsd25-baseboard
+          - const: eukrea,cpuimx25
+          - const: fsl,imx25
+
+      - description: i.MX27 based Boards
+        items:
+          - enum:
+              - armadeus,imx27-apf27      # APF27 SoM
+              - fsl,imx27-pdk
+          - const: fsl,imx27
+
+      - description: i.MX27 APF27 SoM Board
+        items:
+          - const: armadeus,imx27-apf27dev
+          - const: armadeus,imx27-apf27
+          - const: fsl,imx27
+
+      - description: i.MX27 Eukrea CPUIMX27 SoM Board
+        items:
+          - const: eukrea,mbimxsd27-baseboard
+          - const: eukrea,cpuimx27
+          - const: fsl,imx27
+
+      - description: i.MX27 Phytec pca100 Board
+        items:
+          - const: phytec,imx27-pca100-rdk
+          - const: phytec,imx27-pca100
+          - const: fsl,imx27
+
+      - description: i.MX27 Phytec pcm970 Board
+        items:
+          - const: phytec,imx27-pcm970
+          - const: phytec,imx27-pcm038
+          - const: fsl,imx27
+
+      - description: i.MX28 based Boards
+        items:
+          - enum:
+              - armadeus,imx28-apf28      # APF28 SoM
+              - bluegiga,apx4devkit       # Bluegiga APx4 SoM on dev board
+              - crystalfontz,cfa10036     # Crystalfontz CFA-10036 SoM
+              - eukrea,mbmx28lc
+              - fsl,imx28-evk
+              - i2se,duckbill
+              - i2se,duckbill-2
+              - karo,tx28                 # Ka-Ro electronics TX28 module
+              - lwn,imx28-xea
+              - msr,m28cu3                # M28 SoM with custom base board
+              - schulercontrol,imx28-sps1
+              - technologic,imx28-ts4600
+          - const: fsl,imx28
+
+      - description: i.MX28 Aries M28 SoM Board
+        items:
+          - const: aries,m28
+          - const: denx,m28
+          - const: fsl,imx28
+
+      - description: i.MX28 Aries M28EVK Board
+        items:
+          - const: aries,m28evk
+          - const: denx,m28evk
+          - const: fsl,imx28
+
+      - description: i.MX28 Armadeus Systems APF28Dev Board
+        items:
+          - const: armadeus,imx28-apf28dev
+          - const: armadeus,imx28-apf28
+          - const: fsl,imx28
+
+      - description: i.MX28 Crystalfontz CFA-10036 based Boards
+        items:
+          - enum:
+              - crystalfontz,cfa10037
+              - crystalfontz,cfa10049
+              - crystalfontz,cfa10057
+              - crystalfontz,cfa10058
+          - const: crystalfontz,cfa10036
+          - const: fsl,imx28
+
+      - description: i.MX28 Crystalfontz CFA-10037 based Boards
+        items:
+          - enum:
+              - crystalfontz,cfa10055
+              - crystalfontz,cfa10056
+          - const: crystalfontz,cfa10037
+          - const: crystalfontz,cfa10036
+          - const: fsl,imx28
+
+      - description: i.MX28 Duckbill 2 based Boards
+        items:
+          - enum:
+              - i2se,duckbill-2-485
+              - i2se,duckbill-2-enocean
+              - i2se,duckbill-2-spi
+          - const: i2se,duckbill-2
+          - const: fsl,imx28
+
+      - description: i.MX28 Eukrea Electromatique MBMX283LC Board
+        items:
+          - const: eukrea,mbmx283lc
+          - const: eukrea,mbmx28lc
+          - const: fsl,imx28
+
+      - description: i.MX28 Eukrea Electromatique MBMX287LC Board
+        items:
+          - const: eukrea,mbmx287lc
+          - const: eukrea,mbmx283lc
+          - const: eukrea,mbmx28lc
+          - const: fsl,imx28
+
+      - description: i.MX31 based Boards
+        items:
+          - enum:
+              - buglabs,imx31-bug
+              - logicpd,imx31-lite
+          - const: fsl,imx31
+
+      - description: i.MX35 based Boards
+        items:
+          - enum:
+              - fsl,imx35-pdk
+          - const: fsl,imx35
+
+      - description: i.MX35 Eukrea CPUIMX35 Board
+        items:
+          - const: eukrea,mbimxsd35-baseboard
+          - const: eukrea,cpuimx35
+          - const: fsl,imx35
+
+      - description: i.MX50 based Boards
+        items:
+          - enum:
+              - fsl,imx50-evk
+              - kobo,aura
+          - const: fsl,imx50
+
+      - description: i.MX51 based Boards
+        items:
+          - enum:
+              - armadeus,imx51-apf51      # Armadeus Systems APF51 module
+              - fsl,imx51-babbage
+              - technologic,imx51-ts4800
+              - zii,imx51-scu3-esb
+              - zii,imx51-scu2-mezz
+              - zii,imx51-rdu1
+          - const: fsl,imx51
+
+      - description: i.MX51 based Armadeus Systems APF51Dev Board
+        items:
+          - const: armadeus,imx51-apf51dev
+          - const: armadeus,imx51-apf51
+          - const: fsl,imx51
+
+      - description: i.MX51 based Digi ConnectCore CC(W)-MX51 JSK Board
+        items:
+          - const: digi,connectcore-ccxmx51-jsk
+          - const: digi,connectcore-ccxmx51-som
+          - const: fsl,imx51
+
+      - description: i.MX51 based Eukrea CPUIMX51 Board
+        items:
+          - const: eukrea,mbimxsd51
+          - const: eukrea,cpuimx51
+          - const: fsl,imx51
+
+      - description: i.MX53 based Boards
+        items:
+          - enum:
+              - bhf,cx9020
+              - fsl,imx53-ard
+              - fsl,imx53-evk
+              - fsl,imx53-qsb
+              - fsl,imx53-qsrb                # Freescale i.MX53 Quick Start-R Board
+              - fsl,imx53-smd
+              - ge,imx53-cpuvo                # General Electric CS ONE
+              - inversepath,imx53-usbarmory   # Inverse Path USB armory
+              - karo,tx53                     # Ka-Ro electronics TX53 module
+              - kiebackpeter,imx53-ddc        # K+P imx53 DDC
+              - kiebackpeter,imx53-hsc        # K+P imx53 HSC
+              - menlo,m53menlo                # i.MX53 Menlo board
+              - starterkit,sk-imx53
+              - voipac,imx53-dmm-668          # Voipac i.MX53 X53-DMM-668
+          - const: fsl,imx53
+
+      - description: i.MX53 based Aries/DENX M53EVK Board
+        items:
+          - const: aries,imx53-m53evk
+          - const: denx,imx53-m53evk
+          - const: fsl,imx53
+
+      - description: i.MX53 based TQ MBa53 Board
+        items:
+          - const: tq,mba53
+          - const: tq,tqma53
+          - const: fsl,imx53
+
+      - description: i.MX6Q based Boards
+        items:
+          - enum:
+              - auvidea,h100              # Auvidea H100
+              - bosch,imx6q-acc           # Bosch ACC i.MX6 Dual
+              - boundary,imx6q-nitrogen6_max
+              - boundary,imx6q-nitrogen6_som2
+              - boundary,imx6q-nitrogen6x
+              - compulab,cm-fx6           # CompuLab CM-FX6
+              - dmo,imx6q-edmqmx6         # Data Modul eDM-QMX6 Board
+              - ds,imx6q-sbc              # Da Sheng COM-9XX Modules
+              - embest,imx6q-marsboard    # Embest MarS Board i.MX6Dual
+              - emtrion,emcon-mx6         # emCON-MX6D or emCON-MX6Q SoM
+              - emtrion,emcon-mx6-avari   # emCON-MX6D or emCON-MX6Q SoM on Avari Base
+              - engicam,imx6-icore        # Engicam i.CoreM6 Starter Kit
+              - engicam,imx6-icore-rqs    # Engicam i.CoreM6 RQS Starter Kit
+              - fsl,imx6q-arm2
+              - fsl,imx6q-sabreauto
+              - fsl,imx6q-sabrelite
+              - fsl,imx6q-sabresd
+              - karo,imx6q-tx6q           # Ka-Ro electronics TX6Q Modules
+              - kiebackpeter,imx6q-tpc    # K+P i.MX6 Quad TPC Board
+              - kontron,imx6q-samx6i      # Kontron i.MX6 Dual/Quad SMARC Module
+              - kosagi,imx6q-novena       # Kosagi Novena Dual/Quad
+              - kvg,vicut1q               # Kverneland UT1Q board
+              - logicpd,imx6q-logicpd
+              - lwn,display5              # Liebherr Display5 i.MX6 Quad Board
+              - lwn,mccmon6               # Liebherr Monitor6 i.MX6 Quad Board
+              - nutsboard,imx6q-pistachio # NutsBoard i.MX6 Quad Pistachio
+              - microsys,sbc6x            # MicroSys sbc6x board
+              - poslab,imx6q-savageboard  # Poslab SavageBoard Quad
+              - prt,prti6q                # Protonic PRTI6Q board
+              - prt,prtwd2                # Protonic WD2 board
+              - rex,imx6q-rex-pro         # Rex Pro i.MX6 Quad Board
+              - skov,imx6q-skov-revc-lt2  # SKOV IMX6 CPU QuadCore lt2
+              - skov,imx6q-skov-revc-lt6  # SKOV IMX6 CPU QuadCore lt6
+              - skov,imx6q-skov-reve-mi1010ait-1cp1 # SKOV IMX6 CPU QuadCore mi1010ait-1cp1
+              - solidrun,cubox-i/q        # SolidRun Cubox-i Dual/Quad
+              - solidrun,hummingboard/q
+              - solidrun,hummingboard2/q
+              - solidrun,solidsense/q     # SolidRun SolidSense Dual/Quad
+              - tbs,imx6q-tbs2910         # TBS2910 Matrix ARM mini PC
+              - technexion,imx6q-pico-dwarf   # TechNexion i.MX6Q Pico-Dwarf
+              - technexion,imx6q-pico-hobbit  # TechNexion i.MX6Q Pico-Hobbit
+              - technexion,imx6q-pico-nymph   # TechNexion i.MX6Q Pico-Nymph
+              - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
+              - technologic,imx6q-ts4900
+              - technologic,imx6q-ts7970
+              - toradex,apalis_imx6q      # Apalis iMX6 Modules
+              - udoo,imx6q-udoo           # Udoo i.MX6 Quad Board
+              - uniwest,imx6q-evi         # Uniwest Evi
+              - variscite,dt6customboard
+              - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
+              - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
+              - ysoft,imx6q-yapp4-pegasus # i.MX6 Quad Y Soft IOTA Pegasus board
+              - zealz,imx6q-gk802         # Zealz GK802
+              - zii,imx6q-zii-rdu2        # ZII RDU2 Board
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Advantech DMS-BA16 Boards
+        items:
+          - enum:
+              - advantech,imx6q-dms-ba16  # Advantech DMS-BA16
+              - ge,imx6q-b450v3           # General Electric B450v3
+              - ge,imx6q-b650v3           # General Electric B650v3
+              - ge,imx6q-b850v3           # General Electric B850v3
+          - const: advantech,imx6q-ba16
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Armadeus APF6 Boards
+        items:
+          - const: armadeus,imx6q-apf6dev
+          - const: armadeus,imx6q-apf6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q CompuLab Utilite Pro Board
+        items:
+          - const: compulab,utilite-pro
+          - const: compulab,cm-fx6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q DFI FS700-M60-6QD Board
+        items:
+          - const: dfi,fs700-m60-6qd
+          - const: dfi,fs700e-m60
+          - const: fsl,imx6q
+
+      - description: i.MX6Q DHCOM Premium Developer Kit Board
+        items:
+          - const: dh,imx6q-dhcom-pdk2
+          - const: dh,imx6q-dhcom-som
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6q-gw51xx
+              - gw,imx6q-gw52xx
+              - gw,imx6q-gw53xx
+              - gw,imx6q-gw5400-a
+              - gw,imx6q-gw54xx
+              - gw,imx6q-gw551x
+              - gw,imx6q-gw552x
+              - gw,imx6q-gw553x
+              - gw,imx6q-gw560x
+              - gw,imx6q-gw5903
+              - gw,imx6q-gw5904
+              - gw,imx6q-gw5907
+              - gw,imx6q-gw5910
+              - gw,imx6q-gw5912
+              - gw,imx6q-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6q
+
+      - description: i.MX6Q PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6q-pbac06-emmc  # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6q-pbac06-nand  # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6q-pbac06    # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6q
+
+      - description: i.MX6Q PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6q-pbab01    # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6q-pfla02    # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6q
+
+      - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules
+        items:
+          - enum:
+              - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
+          - const: toradex,apalis_imx6q
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-a
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-b
+          - const: fsl,imx6q
+
+      - description: i.MX6QP based Boards
+        items:
+          - enum:
+              - boundary,imx6qp-nitrogen6_max
+              - boundary,imx6qp-nitrogen6_som2
+              - fsl,imx6qp-sabreauto      # i.MX6 Quad Plus SABRE Automotive Board
+              - fsl,imx6qp-sabresd        # i.MX6 Quad Plus SABRE Smart Device Board
+              - karo,imx6qp-tx6qp         # Ka-Ro electronics TX6QP-8037 Module
+              - kvg,vicutp                # Kverneland UT1P board
+              - prt,prtwd3                # Protonic WD3 board
+              - wand,imx6qp-wandboard     # Wandboard i.MX6 QuadPlus Board
+              - ysoft,imx6qp-yapp4-crux-plus  # i.MX6 Quad Plus Y Soft IOTA Crux+ board
+              - ysoft,imx6qp-yapp4-pegasus-plus # i.MX6 Quad Plus Y Soft IOTA Pegasus+ board
+              - zii,imx6qp-zii-rdu2       # ZII RDU2+ Board
+          - const: fsl,imx6qp
+
+      - description: i.MX6QP PHYTEC phyBOARD-Mira
+        items:
+          - const: phytec,imx6qp-pbac06-nand
+          - const: phytec,imx6qp-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6qp
+
+      - description: TQ-Systems TQMa6QP SoM on MBa6x
+        items:
+          - const: tq,imx6qp-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6qp-tqma6qp-b
+          - const: fsl,imx6qp
+
+      - description: i.MX6DL based Boards
+        items:
+          - enum:
+              - abb,aristainetos-imx6dl-4     # aristainetos i.MX6 Dual Lite Board 4
+              - abb,aristainetos-imx6dl-7     # aristainetos i.MX6 Dual Lite Board 7
+              - abb,aristainetos2-imx6dl-4    # aristainetos2 i.MX6 Dual Lite Board 4
+              - abb,aristainetos2-imx6dl-7    # aristainetos2 i.MX6 Dual Lite Board 7
+              - alt,alti6p                    # Altesco I6P Board
+              - boundary,imx6dl-nit6xlite     # Boundary Devices Nitrogen6 Lite
+              - boundary,imx6dl-nitrogen6x    # Boundary Devices Nitrogen6x
+              - bticino,imx6dl-mamoj      # BTicino i.MX6DL Mamoj
+              - eckelmann,imx6dl-ci4x10
+              - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
+              - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
+              - engicam,imx6-icore        # Engicam i.CoreM6 Starter Kit
+              - engicam,imx6-icore-rqs    # Engicam i.CoreM6 RQS Starter Kit
+              - fsl,imx6dl-sabreauto      # i.MX6 DualLite/Solo SABRE Automotive Board
+              - fsl,imx6dl-sabrelite      # i.MX6 DualLite SABRE Lite Board
+              - fsl,imx6dl-sabresd        # i.MX6 DualLite SABRE Smart Device Board
+              - karo,imx6dl-tx6dl         # Ka-Ro electronics TX6U Modules
+              - kontron,imx6dl-samx6i     # Kontron i.MX6 Solo SMARC Module
+              - kvg,victgo                # Kverneland TGO
+              - kvg,vicut1                # Kverneland UT1 board
+              - ply,plybas                # Plymovent BAS board
+              - ply,plym2m                # Plymovent M2M board
+              - poslab,imx6dl-savageboard # Poslab SavageBoard Dual
+              - prt,prtmvt                # Protonic MVT board
+              - prt,prtrvt                # Protonic RVT board
+              - prt,prtvt7                # Protonic VT7 board
+              - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
+              - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
+              - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
+              - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
+              - solidrun,hummingboard/dl
+              - solidrun,hummingboard2/dl      # SolidRun HummingBoard2 Solo/DualLite
+              - solidrun,solidsense/dl         # SolidRun SolidSense Solo/DualLite
+              - technexion,imx6dl-pico-dwarf   # TechNexion i.MX6DL Pico-Dwarf
+              - technexion,imx6dl-pico-hobbit  # TechNexion i.MX6DL Pico-Hobbit
+              - technexion,imx6dl-pico-nymph   # TechNexion i.MX6DL Pico-Nymph
+              - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
+              - technologic,imx6dl-ts4900
+              - technologic,imx6dl-ts7970
+              - toradex,colibri_imx6dl      # Colibri iMX6 Modules
+              - udoo,imx6dl-udoo          # Udoo i.MX6 Dual-lite Board
+              - vdl,lanmcu                # Van der Laan LANMCU board
+              - wand,imx6dl-wandboard     # Wandboard i.MX6 Dual Lite Board
+              - ysoft,imx6dl-yapp4-draco  # i.MX6 Solo Y Soft IOTA Draco board
+              - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-lynx   # i.MX6 DualLite Y Soft IOTA Lynx board
+              - ysoft,imx6dl-yapp4-orion  # i.MX6 DualLite Y Soft IOTA Orion board
+              - ysoft,imx6dl-yapp4-phoenix  # i.MX6 DualLite Y Soft IOTA Phoenix board
+              - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL based Armadeus AFP6 Board
+        items:
+          - const: armadeus,imx6dl-apf6dev
+          - const: armadeus,imx6dl-apf6         # APF6 (Solo) SoM
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL based congatec QMX6 Boards
+        items:
+          - enum:
+              - ge,imx6dl-b105v2          # General Electric B105v2
+              - ge,imx6dl-b105pv2         # General Electric B105Pv2
+              - ge,imx6dl-b125v2          # General Electric B125v2
+              - ge,imx6dl-b125pv2         # General Electric B125Pv2
+              - ge,imx6dl-b155v2          # General Electric B155v2
+          - const: congatec,qmx6
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL based DFI FS700-M60-6DL Board
+        items:
+          - const: dfi,fs700-m60-6dl
+          - const: dfi,fs700e-m60
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL DHCOM PicoITX Board
+        items:
+          - const: dh,imx6dl-dhcom-picoitx
+          - const: dh,imx6dl-dhcom-som
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6dl-gw51xx
+              - gw,imx6dl-gw52xx
+              - gw,imx6dl-gw53xx
+              - gw,imx6dl-gw54xx
+              - gw,imx6dl-gw551x
+              - gw,imx6dl-gw552x
+              - gw,imx6dl-gw553x
+              - gw,imx6dl-gw560x
+              - gw,imx6dl-gw5903
+              - gw,imx6dl-gw5904
+              - gw,imx6dl-gw5907
+              - gw,imx6dl-gw5910
+              - gw,imx6dl-gw5912
+              - gw,imx6dl-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL PHYTEC phyBOARD-Mira
+        items:
+          - enum:
+              - phytec,imx6dl-pbac06-emmc # PHYTEC phyBOARD-Mira eMMC RDK
+              - phytec,imx6dl-pbac06-nand # PHYTEC phyBOARD-Mira NAND RDK
+          - const: phytec,imx6dl-pbac06   # PHYTEC phyBOARD-Mira
+          - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL PHYTEC phyFLEX-i.MX6
+        items:
+          - const: phytec,imx6dl-pbab01   # PHYTEC phyFLEX carrier board
+          - const: phytec,imx6dl-pfla02   # PHYTEC phyFLEX-i.MX6 Quad
+          - const: fsl,imx6dl
+
+      - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
+        items:
+          - enum:
+              - toradex,colibri_imx6dl-aster        # Colibri iMX6DL/S Module on Aster Board
+              - toradex,colibri_imx6dl-eval-v3      # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl-iris         # Colibri iMX6DL/S Module on Iris Board
+              - toradex,colibri_imx6dl-iris-v2      # Colibri iMX6DL/S Module on Iris Board V2
+          - const: toradex,colibri_imx6dl           # Colibri iMX6DL/S Module
+          - const: fsl,imx6dl
+
+      - description: i.MX6S DHCOM DRC02 Board
+        items:
+          - const: dh,imx6s-dhcom-drc02
+          - const: dh,imx6s-dhcom-som
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-a
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-b
+          - const: fsl,imx6dl
+
+      - description: i.MX6SL based Boards
+        items:
+          - enum:
+              - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,aura2
+              - kobo,tolino-shine2hd
+              - kobo,tolino-shine3
+              - kobo,tolino-vision
+              - kobo,tolino-vision5
+              - revotics,imx6sl-warp      # Revotics WaRP Board
+          - const: fsl,imx6sl
+
+      - description: i.MX6SLL based Boards
+        items:
+          - enum:
+              - fsl,imx6sll-evk
+              - kobo,clarahd
+              - kobo,librah2o
+          - const: fsl,imx6sll
+
+      - description: i.MX6SX based Boards
+        items:
+          - enum:
+              - boundary,imx6sx-nitrogen6sx
+              - fsl,imx6sx-sabreauto      # i.MX6 SoloX Sabre Auto Board
+              - fsl,imx6sx-sdb            # i.MX6 SoloX SDB Board
+              - fsl,imx6sx-sdb-reva       # i.MX6 SoloX SDB Rev-A Board
+              - samtec,imx6sx-vining-2000 # Softing VIN|ING 2000 Board
+              - udoo,neobasic             # UDOO Neo Basic Board
+              - udoo,neoextended          # UDOO Neo Extended
+              - udoo,neofull              # UDOO Neo Full
+          - const: fsl,imx6sx
+
+      - description: i.MX6UL based Boards
+        items:
+          - enum:
+              - engicam,imx6ul-geam       # Engicam GEAM6UL Starter Kit
+              - engicam,imx6ul-isiot      # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
+              - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
+              - karo,imx6ul-tx6ul         # Ka-Ro electronics TXUL-0010 Module
+              - kontron,sl-imx6ul         # Kontron SL i.MX6UL SoM
+              - prt,prti6g                # Protonic PRTI6G Board
+              - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
+              - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
+              - technexion,imx6ul-pico-pi      # TechNexion i.MX6UL Pico-Pi
+          - const: fsl,imx6ul
+
+      - description: i.MX6UL Armadeus Systems OPOS6UL SoM Board
+        items:
+          - const: armadeus,imx6ul-opos6uldev   # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board
+          - const: armadeus,imx6ul-opos6ul      # OPOS6UL (i.MX6UL) SoM
+          - const: fsl,imx6ul
+
+      - description: i.MX6UL Digi International ConnectCore 6UL Boards
+        items:
+          - enum:
+              - digi,ccimx6ulsbcexpress   # Digi International ConnectCore 6UL SBC Express
+              - digi,ccimx6ulsbcpro       # Digi International ConnectCore 6UL SBC Pro
+          - const: digi,ccimx6ulsom
+          - const: fsl,imx6ul
+
+      - description: i.MX6UL Grinn liteBoard
+        items:
+          - const: grinn,imx6ul-liteboard
+          - const: grinn,imx6ul-litesom
+          - const: fsl,imx6ul
+
+      - description: i.MX6UL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ul-pbacd10-emmc
+              - phytec,imx6ul-pbacd10-nand
+          - const: phytec,imx6ul-pbacd10  # PHYTEC phyBOARD-Segin with i.MX6 UL
+          - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
+          - const: fsl,imx6ul
+
+      - description: Kontron BL i.MX6UL (N631X S) Board
+        items:
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: Kontron BL i.MX6UL 43 (N631X S 43) Board
+        items:
+          - const: kontron,bl-imx6ul-43    # Kontron BL i.MX6UL Carrier Board with 4.3" Display
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul1-mba6ulx
+          - const: tq,imx6ul-tqma6ul1      # MCIMX6G1
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2-mba6ulx
+          - const: tq,imx6ul-tqma6ul2      # MCIMX6G2
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter
+              - tq,imx6ul-tqma6ul2l-mba6ulxl
+          - const: tq,imx6ul-tqma6ul2l      # MCIMX6G2, LGA SoM variant
+          - const: fsl,imx6ul
+
+      - description: i.MX6ULL based Boards
+        items:
+          - enum:
+              - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
+              - joz,jozacp                # JOZ Access Point
+              - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
+              - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
+              - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
+              - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
+              - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
+        items:
+          - const: armadeus,imx6ull-opos6uldev  # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board
+          - const: armadeus,imx6ull-opos6ul     # OPOS6UL (i.MX6ULL) SoM
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL chargebyte Tarragon Boards
+        items:
+          - enum:
+              - chargebyte,imx6ull-tarragon-master
+              - chargebyte,imx6ull-tarragon-micro
+              - chargebyte,imx6ull-tarragon-slave
+              - chargebyte,imx6ull-tarragon-slavext
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL DHCOM SoM based Boards
+        items:
+          - enum:
+              - dh,imx6ull-dhcom-drc02
+              - dh,imx6ull-dhcom-pdk2
+              - dh,imx6ull-dhcom-picoitx
+          - const: dh,imx6ull-dhcom-som # The DHCOR is soldered on the DHCOM
+          - const: dh,imx6ull-dhcor-som
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL DHCOR SoM based Boards
+        items:
+          - const: marantec,imx6ull-dhcor-maveo-box
+          - const: dh,imx6ull-dhcor-som
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL PHYTEC phyBOARD-Segin
+        items:
+          - enum:
+              - phytec,imx6ull-pbacd10-emmc
+              - phytec,imx6ull-pbacd10-nand
+          - const: phytec,imx6ull-pbacd10 # PHYTEC phyBOARD-Segin with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL PHYTEC phyGATE-Tauri
+        items:
+          - enum:
+              - phytec,imx6ull-phygate-tauri-emmc
+              - phytec,imx6ull-phygate-tauri-nand
+          - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063        # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-eval      # Colibri Evaluation Board V3
+              - toradex,colibri-imx6ull-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull        # Colibri iMX6ULL Module
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-emmc-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-emmc-eval      # Colibri Evaluation B. V3
+              - toradex,colibri-imx6ull-emmc-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-emmc-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-emmc        # Colibri iMX6ULL 1GB (eMMC) Module
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-wifi-eval     # Colibri Eval. B. V3
+              - toradex,colibri-imx6ull-wifi-aster    # Aster Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris     # Iris Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris-v2  # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-wifi       # Colibri iMX6ULL Wi-Fi / BT Module
+          - const: fsl,imx6ull
+
+      - description: Kontron BL i.MX6ULL (N6411 S) Board
+        items:
+          - const: kontron,bl-imx6ull   # Kontron BL i.MX6ULL Carrier Board
+          - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
+          - const: fsl,imx6ull
+
+      - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2-mba6ulx
+          - const: tq,imx6ull-tqma6ull2      # MCIMX6Y2
+          - const: fsl,imx6ull
+
+      - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
+              - tq,imx6ull-tqma6ull2l-mba6ulxl
+          - const: tq,imx6ull-tqma6ull2l      # MCIMX6Y2, LGA SoM variant
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULZ based Boards
+        items:
+          - enum:
+              - bsh,imx6ulz-bsh-smm-m2    # i.MX6 ULZ BSH SystemMaster
+              - fsl,imx6ulz-14x14-evk     # i.MX6 ULZ 14x14 EVK Board
+          - const: fsl,imx6ull # This seems odd. Should be last?
+          - const: fsl,imx6ulz
+
+      - description: i.MX7S based Boards
+        items:
+          - enum:
+              - element14,imx7s-warp      # Element14 Warp i.MX7 Board
+              - toradex,colibri-imx7s     # Colibri iMX7S Module
+          - const: fsl,imx7s
+
+      - description: i.MX7S Boards with Toradex Colibri iMX7S Module
+        items:
+          - enum:
+              - toradex,colibri-imx7s-aster     # Module on Aster Carrier Board
+              - toradex,colibri-imx7s-eval-v3   # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7s-iris      # Module on Iris Carrier Board
+              - toradex,colibri-imx7s-iris-v2   # Module on Iris Carrier Board V2
+          - const: toradex,colibri-imx7s
+          - const: fsl,imx7s
+
+      - description: TQ-Systems TQMa7S SoM on MBa7x board
+        items:
+          - const: tq,imx7s-mba7
+          - const: tq,imx7s-tqma7
+          - const: fsl,imx7s
+
+      - description: i.MX7D based Boards
+        items:
+          - enum:
+              - boundary,imx7d-nitrogen7
+              - compulab,cl-som-imx7      # CompuLab CL-SOM-iMX7
+              - fsl,imx7d-sdb             # i.MX7 SabreSD Board
+              - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
+              - kam,imx7d-flex-concentrator       # Kamstrup OMNIA Flex Concentrator
+              - kam,imx7d-flex-concentrator-mfg   # Kamstrup OMNIA Flex Concentrator in manufacturing mode
+              - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
+              - remarkable,imx7d-remarkable2  # i.MX7D ReMarkable 2 E-Ink Tablet
+              - storopack,imx7d-smegw01       # Storopack i.MX7D SMEGW01
+              - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
+              - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
+              - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
+              - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
+              - toradex,colibri-imx7d         # Colibri iMX7D Module
+              - toradex,colibri-imx7d-emmc    # Colibri iMX7D 1GB (eMMC) Module
+              - zii,imx7d-rmu2            # ZII RMU2 Board
+              - zii,imx7d-rpu2            # ZII RPU2 Board
+          - const: fsl,imx7d
+
+      - description: TQ-Systems TQMa7D SoM on MBa7x board
+        items:
+          - const: tq,imx7d-mba7
+          - const: tq,imx7d-tqma7
+          - const: fsl,imx7d
+
+      - description:
+          Compulab SBC-iMX7 is a single board computer based on the
+          Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
+          the CL-SOM-iMX7 System-on-Module providing most of the functions,
+          and SB-SOM-iMX7 carrier board providing additional peripheral
+          functions and connectors.
+        items:
+          - const: compulab,sbc-imx7
+          - const: compulab,cl-som-imx7
+          - const: fsl,imx7d
+
+      - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
+        items:
+          - enum:
+              - toradex,colibri-imx7d-aster   # Aster Carrier Board
+              - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-iris    # Iris Carrier Board
+              - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2
+          - const: toradex,colibri-imx7d
+          - const: fsl,imx7d
+
+      - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module
+        items:
+          - enum:
+              - toradex,colibri-imx7d-emmc-aster    # Module on Aster Carrier Board
+              - toradex,colibri-imx7d-emmc-eval-v3  # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-iris     # Module on Iris Carrier Board
+              - toradex,colibri-imx7d-emmc-iris-v2  # Module on Iris Carrier Board V2
+          - const: toradex,colibri-imx7d-emmc
+          - const: fsl,imx7d
+
+      - description: i.MX7ULP based Boards
+        items:
+          - enum:
+              - ea,imx7ulp-com           # i.MX7ULP Embedded Artists COM Board
+              - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
+          - const: fsl,imx7ulp
+
+      - description: i.MX8MM based Boards
+        items:
+          - enum:
+              - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
+              - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
+              - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
+              - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
+              - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
+              - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - fsl,imx8mm-evkb           # i.MX8MM EVKB Board
+              - gateworks,imx8mm-gw7904
+              - gateworks,imx8mm-gw7905-0x # i.MX8MM Gateworks Board
+              - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
+              - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
+              - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
+              - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
+              - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
+              - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
+              - innocomm,wb15-evk         # i.MX8MM Innocomm EVK board with WB15 SoM
+              - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
+              - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
+              - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mm-wifi  # Verdin iMX8M Mini Wi-Fi / BT Modules
+              - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
+          - const: fsl,imx8mm
+
+      - description: Emtop i.MX8MM based Boards
+        items:
+          - const: ees,imx8mm-emtop-baseboard      # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
+          - const: ees,imx8mm-emtop-som            # i.MX8MM Emtop SOM-IMX8MMLPD4 module
+          - const: fsl,imx8mm
+
+      - description: Engicam i.Core MX8M Mini SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mm-ctouch2        # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+              - engicam,icore-mx8mm-edimm2.2       # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mm             # i.MX8MM Engicam i.Core MX8M Mini SoM
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM (N801X S) Board
+        items:
+          - const: kontron,imx8mm-bl
+          - const: kontron,imx8mm-sl
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM OSM-S (N802X S) Board
+        items:
+          - const: kontron,imx8mm-bl-osm-s
+          - const: kontron,imx8mm-osm-s
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Modules
+        items:
+          - enum:
+              - menlo,mx8menlo                       # Verdin iMX8M Mini Module on i.MX8MM Menlo board
+              - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
+              - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+              - toradex,verdin-imx8mm-nonwifi-yavia  # Verdin iMX8M Mini Module on Yavia
+          - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mm-wifi-yavia  # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: PHYTEC phyCORE-i.MX8MM SoM based boards
+        items:
+          - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK
+          - const: phytec,imx8mm-phycore-som        # phyCORE-i.MX8MM SoM
+          - const: fsl,imx8mm
+
+      - description: Variscite VAR-SOM-MX8MM based boards
+        items:
+          - const: variscite,var-som-mx8mm-symphony
+          - const: variscite,var-som-mx8mm
+          - const: fsl,imx8mm
+
+      - description:
+          TQMa8MxML is a series of SOM featuring NXP i.MX8MM system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]ML) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - cloos,imx8mm-phg           # i.MX8MM Cloos PHG Board
+              - tq,imx8mm-tqma8mqml-mba8mx # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM on MBa8Mx
+          - const: tq,imx8mm-tqma8mqml     # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM
+          - const: fsl,imx8mm
+
+      - description: i.MX8MN based Boards
+        items:
+          - enum:
+              - beacon,imx8mn-beacon-kit  # i.MX8MN Beacon Development Kit
+              - bsh,imx8mn-bsh-smm-s2     # i.MX8MN BSH SystemMaster S2
+              - bsh,imx8mn-bsh-smm-s2pro  # i.MX8MN BSH SystemMaster S2 PRO
+              - fsl,imx8mn-ddr3l-evk      # i.MX8MN DDR3L EVK Board
+              - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
+              - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
+              - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
+          - const: fsl,imx8mn
+
+      - description: Variscite VAR-SOM-MX8MN based boards
+        items:
+          - const: variscite,var-som-mx8mn-symphony
+          - const: variscite,var-som-mx8mn
+          - const: fsl,imx8mn
+
+      - description:
+          TQMa8MxNL is a series of SOM featuring NXP i.MX8MN system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]NL) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mn-tqma8mqnl-mba8mx # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM on MBa8Mx
+          - const: tq,imx8mn-tqma8mqnl     # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM
+          - const: fsl,imx8mn
+
+      - description: i.MX8MP based Boards
+        items:
+          - enum:
+              - beacon,imx8mp-beacon-kit  # i.MX8MP Beacon Development Kit
+              - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
+              - fsl,imx8mp-evk            # i.MX8MP EVK Board
+              - gateworks,imx8mp-gw71xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw72xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board
+              - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
+              - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
+          - const: fsl,imx8mp
+
+      - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+        items:
+          - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+          - const: avnet,sm2s-imx8mp-14N0600E     # 14N0600E variant of SM2S-IMX8PLUS SoM
+          - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
+          - const: fsl,imx8mp
+
+      - description: i.MX8MP DHCOM based Boards
+        items:
+          - enum:
+              - dh,imx8mp-dhcom-pdk2         # i.MX8MP DHCOM SoM on PDK2 board
+              - dh,imx8mp-dhcom-pdk3         # i.MX8MP DHCOM SoM on PDK3 board
+          - const: dh,imx8mp-dhcom-som       # i.MX8MP DHCOM SoM
+          - const: fsl,imx8mp
+
+      - description: Engicam i.Core MX8M Plus SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mp-edimm2.2       # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mp             # i.MX8MP Engicam i.Core MX8M Plus SoM
+          - const: fsl,imx8mp
+
+      - description: PHYTEC phyCORE-i.MX8MP SoM based boards
+        items:
+          - const: phytec,imx8mp-phyboard-pollux-rdk # phyBOARD-Pollux RDK
+          - const: phytec,imx8mp-phycore-som         # phyCORE-i.MX8MP SoM
+          - const: fsl,imx8mp
+
+      - description: Polyhex DEBIX i.MX8MP based SBCs
+        items:
+          - enum:
+              - polyhex,imx8mp-debix-model-a        # Polyhex Debix Model A Board
+          - const: polyhex,imx8mp-debix             # Polyhex i.MX8MP Debix SBCs
+          - const: fsl,imx8mp
+
+      - description: Polyhex DEBIX i.MX8MP SOM A based boards
+        items:
+          - enum:
+              - polyhex,imx8mp-debix-som-a-bmb-08   # Polyhex Debix SOM A on SOM A I/O board
+          - const: polyhex,imx8mp-debix-som-a       # Polyhex Debix SOM A
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
+              - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+              - toradex,verdin-imx8mp-nonwifi-yavia  # Verdin iMX8M Plus Module on Yavia
+          - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mp-wifi-yavia  # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description:
+          TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All CPU variants use the same device tree hence only one compatible
+          is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed
+          version as an industrial computing device.
+        items:
+          - enum:
+              - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+          - const: tq,imx8mp-tqma8mpql       # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+          - const: fsl,imx8mp
+
+      - description: i.MX8MQ based Boards
+        items:
+          - enum:
+              - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+              - boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
+              - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
+              - fsl,imx8mq-evk            # i.MX8MQ EVK Board
+              - google,imx8mq-phanbell    # Google Coral Edge TPU
+              - kontron,pitx-imx8m        # Kontron pITX-imx8m Board
+              - purism,librem5-devkit     # Purism Librem5 devkit
+              - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
+              - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
+          - const: fsl,imx8mq
+
+      - description: i.MX8MQ NITROGEN SoM based Boards
+        items:
+          - const: mntre,reform2                  # MNT Reform2 Laptop
+          - const: boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
+          - const: fsl,imx8mq
+
+      - description: Purism Librem5 phones
+        items:
+          - enum:
+              - purism,librem5r2          # Purism Librem5 phone "Chestnut"
+              - purism,librem5r3          # Purism Librem5 phone "Dogwood"
+              - purism,librem5r4          # Purism Librem5 phone "Evergreen"
+          - const: purism,librem5
+          - const: fsl,imx8mq
+
+      - description:
+          TQMa8Mx is a series of SOM featuring NXP i.MX8MQ system-on-chip
+          variants. It is designed to be clicked on different carrier boards.
+        items:
+          - enum:
+              - tq,imx8mq-tqma8mq-mba8mx # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM on MBa8Mx
+          - const: tq,imx8mq-tqma8mq     # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM
+          - const: fsl,imx8mq
+
+      - description: Zodiac Inflight Innovations Ultra Boards
+        items:
+          - enum:
+              - zii,imx8mq-ultra-rmb3
+              - zii,imx8mq-ultra-zest
+          - const: zii,imx8mq-ultra
+          - const: fsl,imx8mq
+
+      - description: i.MX8QM based Boards
+        items:
+          - enum:
+              - fsl,imx8qm-mek           # i.MX8QM MEK Board
+              - toradex,apalis-imx8      # Apalis iMX8 Modules
+              - toradex,apalis-imx8-v1.1 # Apalis iMX8 V1.1 Modules
+          - const: fsl,imx8qm
+
+      - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
+        items:
+          - enum:
+              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation Board
+              - toradex,apalis-imx8-ixora-v1.1      # Apalis iMX8 Module on Ixora V1.1 Carrier Board
+          - const: toradex,apalis-imx8
+          - const: fsl,imx8qm
+
+      - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
+        items:
+          - enum:
+              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+              - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
+              - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
+          - const: toradex,apalis-imx8-v1.1
+          - const: fsl,imx8qm
+
+      - description: i.MX8QXP based Boards
+        items:
+          - enum:
+              - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
+              - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
+              - toradex,colibri-imx8x     # Colibri iMX8X Modules
+          - const: fsl,imx8qxp
+
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
+          - const: fsl,imx8dxl
+
+      - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules
+        items:
+          - enum:
+              - toradex,colibri-imx8x-aster   # Colibri iMX8X Module on Aster Board
+              - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx8x-iris    # Colibri iMX8X Module on Iris Board
+              - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2
+          - const: toradex,colibri-imx8x
+          - const: fsl,imx8qxp
+
+      - description: i.MX8ULP based Boards
+        items:
+          - enum:
+              - fsl,imx8ulp-evk           # i.MX8ULP EVK Board
+          - const: fsl,imx8ulp
+
+      - description: i.MX93 based Boards
+        items:
+          - enum:
+              - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
+          - const: fsl,imx93
+
+      - description: i.MXRT1050 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1050-evk         # i.MXRT1050 EVK Board
+          - const: fsl,imxrt1050
+
+      - description: i.MXRT1170 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1170-evk         # i.MXRT1170 EVK Board
+          - const: fsl,imxrt1170
+
+      - description:
+          TQMa93xxLA and TQMa93xxCA are two series of feature compatible SOM
+          using NXP i.MX93 SOC in 11x11 mm package.
+          TQMa93xxLA is designed to be soldered on different carrier boards.
+          TQMa93xxCA is a compatible variant using board to board connectors.
+          All SOM and CPU variants use the same device tree hence only one
+          compatible is needed. Bootloader disables all features not present
+          in the assembled SOC.
+          MBa93xxCA mainboard can be used as starterkit for the SOM
+          soldered on an adapter board or for the connector variant
+          MBa93xxLA mainboard is a single board computer using the solderable
+          SOM variant
+        items:
+          - enum:
+              - tq,imx93-tqma9352-mba93xxca # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM on MBa93xxCA
+              - tq,imx93-tqma9352-mba93xxla # TQ-Systems GmbH i.MX93 TQMa93xxLA SOM on MBa93xxLA SBC
+          - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
+          - const: fsl,imx93
+
+      - description:
+          Freescale Vybrid Platform Device Tree Bindings
+
+          For the Vybrid SoC family all variants with DDR controller are supported,
+          which is the VF5xx and VF6xx series. Out of historical reasons, in most
+          places the kernel uses vf610 to refer to the whole family.
+          The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
+          core support.
+        items:
+          - enum:
+              - fsl,vf500
+              - fsl,vf510
+              - fsl,vf600
+              - fsl,vf610
+              - fsl,vf610m4
+
+      - description: Toradex Colibri VF50 Module on Colibri Evaluation Board
+        items:
+          - const: toradex,vf500-colibri_vf50-on-eval
+          - const: toradex,vf500-colibri_vf50
+          - const: fsl,vf500
+
+      - description: VF610 based Boards
+        items:
+          - enum:
+              - fsl,vf610-twr             # VF610 Tower Board
+              - lwn,bk4                   # Liebherr BK4 controller
+              - phytec,vf610-cosmic       # PHYTEC Cosmic/Cosmic+ Board
+              - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
+          - const: fsl,vf610
+
+      - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
+        items:
+          - const: toradex,vf610-colibri_vf61-on-eval
+          - const: toradex,vf610-colibri_vf61
+          - const: fsl,vf610
+
+      - description: ZII's VF610 based Boards
+        items:
+          - enum:
+              - zii,vf610cfu1      # ZII VF610 CFU1 Board
+              - zii,vf610dev-c     # ZII VF610 Development Board, Rev C
+              - zii,vf610dev-b     # ZII VF610 Development Board, Rev B
+              - zii,vf610scu4-aib  # ZII VF610 SCU4 AIB
+              - zii,vf610dtu       # ZII VF610 SSMB DTU Board
+              - zii,vf610spu3      # ZII VF610 SSMB SPU3 Board
+              - zii,vf610spb4      # ZII VF610 SPB4 Board
+          - const: zii,vf610dev
+          - const: fsl,vf610
+
+      - description: LS1012A based Boards
+        items:
+          - enum:
+              - ebs-systart,oxalis
+              - fsl,ls1012a-rdb
+              - fsl,ls1012a-frdm
+              - fsl,ls1012a-frwy
+              - fsl,ls1012a-qds
+          - const: fsl,ls1012a
+
+      - description: LS1021A based Boards
+        items:
+          - enum:
+              - fsl,ls1021a-iot
+              - fsl,ls1021a-moxa-uc-8410a
+              - fsl,ls1021a-qds
+              - fsl,ls1021a-tsn
+              - fsl,ls1021a-twr
+          - const: fsl,ls1021a
+
+      - description:
+          TQ-Systems TQMLS102xA is a series of socketable SOM featuring
+          LS102x system-on-chip variants. MBLS102xA mainboard can be used as
+          starterkit.
+        items:
+          - enum:
+              - tq,ls1021a-tqmls1021a-mbls102xa
+          - const: tq,ls1021a-tqmls1021a
+          - const: fsl,ls1021a
+
+      - description: LS1028A based Boards
+        items:
+          - enum:
+              - fsl,ls1028a-qds
+              - fsl,ls1028a-rdb
+          - const: fsl,ls1028a
+
+      - description: Kontron KBox A-230-LS
+        items:
+          - const: kontron,kbox-a-230-ls
+          - const: kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+      - description:
+          Kontron SMARC-sAL28 board on the SMARC Eval Carrier 2.0
+        items:
+          - enum:
+              - kontron,sl28-var1-ads2
+              - kontron,sl28-var2-ads2
+              - kontron,sl28-var3-ads2
+              - kontron,sl28-var4-ads2
+          - enum:
+              - kontron,sl28-var1
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (on a generic/undefined carrier)
+        items:
+          - enum:
+              - kontron,sl28-var1
+              - kontron,sl28-var2
+              - kontron,sl28-var3
+              - kontron,sl28-var4
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description:
+          Kontron SMARC-sAL28 board (base). This is used in the base device
+          tree which is compatible with the overlays provided by the
+          vendor.
+        items:
+          - const: kontron,sl28
+          - const: fsl,ls1028a
+
+      - description: LS1043A based Boards
+        items:
+          - enum:
+              - fsl,ls1043a-rdb
+              - fsl,ls1043a-qds
+          - const: fsl,ls1043a
+
+      - description: LS1046A based Boards
+        items:
+          - enum:
+              - fsl,ls1046a-frwy
+              - fsl,ls1046a-qds
+              - fsl,ls1046a-rdb
+          - const: fsl,ls1046a
+
+      - description: LS1088A based Boards
+        items:
+          - enum:
+              - fsl,ls1088a-qds
+              - fsl,ls1088a-rdb
+          - const: fsl,ls1088a
+
+      - description: LS2080A based Boards
+        items:
+          - enum:
+              - fsl,ls2080a-simu
+              - fsl,ls2080a-qds
+              - fsl,ls2080a-rdb
+          - const: fsl,ls2080a
+
+      - description: LS2088A based Boards
+        items:
+          - enum:
+              - fsl,ls2088a-qds
+              - fsl,ls2088a-rdb
+          - const: fsl,ls2088a
+
+      - description: LX2160A based Boards
+        items:
+          - enum:
+              - fsl,lx2160a-bluebox3
+              - fsl,lx2160a-bluebox3-rev-a
+              - fsl,lx2160a-qds
+              - fsl,lx2160a-rdb
+              - fsl,lx2162a-qds
+          - const: fsl,lx2160a
+
+      - description: SolidRun LX2160A based Boards
+        items:
+          - enum:
+              - solidrun,clearfog-cx
+              - solidrun,honeycomb
+          - const: solidrun,lx2160a-cex7
+          - const: fsl,lx2160a
+
+      - description: S32G2 based Boards
+        items:
+          - enum:
+              - nxp,s32g274a-evb
+              - nxp,s32g274a-rdb2
+          - const: nxp,s32g2
+
+      - description: S32V234 based Boards
+        items:
+          - enum:
+              - fsl,s32v234-evb           # S32V234-EVB2 Customer Evaluation Board
+          - const: fsl,s32v234
+
+      - description: Traverse LS1088A based Boards
+        items:
+          - enum:
+              - traverse,ten64            # Ten64 Networking Appliance / Board
+          - const: fsl,ls1088a
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/gemini.yaml b/Documentation/devicetree/bindings/arm/gemini.yaml
new file mode 100644
index 0000000000..f6a0b67583
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gemini.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/gemini.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina systems Gemini platforms
+
+description: |
+  The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
+  produced by Storlink Semiconductor around 2005. The company was renamed
+  later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
+  It was derived from earlier products from Storm named SL3316 (Centroid) and
+  SL3512 (Bulverde).
+
+  Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
+  produced and used for NAS and similar usecases. In 2014 Cortina Systems was
+  in turn acquired by Inphi, who seem to have discontinued this product family.
+
+  Many of the IP blocks used in the SoC comes from Faraday Technology.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Storlink Semiconductor Gemini324 EV-Board also known
+          as Storm Semiconductor SL93512R_BRD
+        items:
+          - const: storlink,gemini324
+          - const: storm,sl93512r
+          - const: cortina,gemini
+
+      - description: D-Link DIR-685 Xtreme N Storage Router
+        items:
+          - const: dlink,dir-685
+          - const: cortina,gemini
+
+      - description: D-Link DNS-313 1-Bay Network Storage Enclosure
+        items:
+          - const: dlink,dns-313
+          - const: cortina,gemini
+
+      - description: Edimax NS-2502
+        items:
+          - const: edimax,ns-2502
+          - const: cortina,gemini
+
+      - description: ITian Square One SQ201
+        items:
+          - const: itian,sq201
+          - const: cortina,gemini
+
+      - description: Raidsonic NAS IB-4220-B
+        items:
+          - const: raidsonic,ib-4220-b
+          - const: cortina,gemini
+
+      - description: SSI 1328
+        items:
+          - const: ssi,1328
+          - const: cortina,gemini
+
+      - description: Teltonika RUT1xx Mobile Router
+        items:
+          - const: teltonika,rut1xx
+          - const: cortina,gemini
+
+      - description: Wiligear Wiliboard WBD-111
+        items:
+          - const: wiligear,wiliboard-wbd111
+          - const: cortina,gemini
+
+      - description: Wiligear Wiliboard WBD-222
+        items:
+          - const: wiligear,wiliboard-wbd222
+          - const: cortina,gemini
+
+      - description: Wiligear Wiliboard WBD-111 - old incorrect binding
+        items:
+          - const: wiliboard,wbd111
+          - const: cortina,gemini
+        deprecated: true
+
+      - description: Wiligear Wiliboard WBD-222 - old incorrect binding
+        items:
+          - const: wiliboard,wbd222
+          - const: cortina,gemini
+        deprecated: true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
new file mode 100644
index 0000000000..4fc208d399
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/cpuctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon CPU controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The clock registers and power registers of secondary cores are defined
+  in CPU controller, especially in HIX5HD2 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,cpuctrl
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^clock@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: hisilicon,hix5hd2-clock
+
+      reg:
+        maxItems: 1
+
+      "#clock-cells":
+        const: 1
+
+    required:
+      - compatible
+      - reg
+      - "#clock-cells"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    cpuctrl@a22000 {
+        compatible = "hisilicon,cpuctrl";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x00a22000 0x2000>;
+        ranges = <0 0x00a22000 0x2000>;
+
+        clock: clock@0 {
+            compatible = "hisilicon,hix5hd2-clock";
+            reg = <0 0x2000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml
new file mode 100644
index 0000000000..cba1937aad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi3798cv200-perictrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Hi3798CV200 Peripheral Controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The Hi3798CV200 Peripheral Controller controls peripherals, queries
+  their status, and configures some functions of peripherals.
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hi3798cv200-perictrl
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    peripheral-controller@8a20000 {
+        compatible = "hisilicon,hi3798cv200-perictrl", "syscon", "simple-mfd";
+        reg = <0x8a20000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x8a20000 0x1000>;
+
+        phy@850 {
+            compatible = "hisilicon,hi3798cv200-combphy";
+            reg = <0x850 0x8>;
+            #phy-cells = <1>;
+            clocks = <&crg 42>;
+            resets = <&crg 0x188 4>;
+            assigned-clocks = <&crg 42>;
+            assigned-clock-rates = <100000000>;
+            hisilicon,fixed-mode = <4>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
new file mode 100644
index 0000000000..6ea6d7ee7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hi6220-domain-ctrl.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hi6220-domain-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Hi6220 domain controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Hisilicon designs some special domain controllers for mobile platform,
+  such as: the power Always On domain controller, the Media domain
+  controller(e.g. codec, G3D ...) and the Power Management domain
+  controller.
+
+  The compatible names of each domain controller are as follows:
+  Power Always ON domain controller  --> hisilicon,hi6220-aoctrl
+  Media domain controller            --> hisilicon,hi6220-mediactrl
+  Power Management domain controller --> hisilicon,hi6220-pmctrl
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - hisilicon,hi6220-aoctrl
+          - hisilicon,hi6220-mediactrl
+          - hisilicon,hi6220-pmctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ao_ctrl@f7800000 {
+        compatible = "hisilicon,hi6220-aoctrl", "syscon";
+        reg = <0xf7800000 0x2000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+    media_ctrl@f4410000 {
+        compatible = "hisilicon,hi6220-mediactrl", "syscon";
+        reg = <0xf4410000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+    pm_ctrl@f7032000 {
+        compatible = "hisilicon,hi6220-pmctrl", "syscon";
+        reg = <0xf7032000 0x1000>;
+        #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
new file mode 100644
index 0000000000..483caf0ce2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-bootwrapper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bootwrapper boot method
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Bootwrapper boot method (software protocol on SMP)
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hip04-bootwrapper
+
+  boot-method:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Address and size of boot method.
+      [0]: bootwrapper physical address
+      [1]: bootwrapper size
+      [2]: relocation physical address
+      [3]: relocation size
+    minItems: 2
+    maxItems: 4
+
+required:
+  - compatible
+  - boot-method
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml
new file mode 100644
index 0000000000..60c516a04a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-fabric.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/hip04-fabric.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Fabric controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Hisilicon Fabric controller
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,hip04-fabric
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml
new file mode 100644
index 0000000000..6d50658728
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/pctrl.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/pctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral misc control register
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: Peripheral misc control register
+
+properties:
+  compatible:
+    items:
+      - const: hisilicon,pctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pctrl@fca09000 {
+        compatible = "hisilicon,pctrl";
+        reg = <0xfca09000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
new file mode 100644
index 0000000000..5a53d433b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/controller/sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon system controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  The Hisilicon system controller is used on many Hisilicon boards, it can be
+  used to assist the slave core startup, reboot the system, etc.
+
+  There are some variants of the Hisilicon system controller, such as HiP01,
+  Hi3519, Hi6220 system controller, each of them is mostly compatible with the
+  Hisilicon system controller, but some same registers located at different
+  offset. In addition, the HiP01 system controller has some specific control
+  registers for HIP01 SoC family, such as slave core boot.
+
+  The compatible names of each system controller are as follows:
+  Hisilicon system controller   --> hisilicon,sysctrl
+  HiP01     system controller   --> hisilicon,hip01-sysctrl
+  Hi6220    system controller   --> hisilicon,hi6220-sysctrl
+  Hi3519    system controller   --> hisilicon,hi3519-sysctrl
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: hisilicon,hi6220-sysctrl
+    then:
+      required:
+        - '#clock-cells'
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - hisilicon,sysctrl
+              - hisilicon,hi6220-sysctrl
+              - hisilicon,hi3519-sysctrl
+          - const: syscon
+      - items:
+          - const: hisilicon,hip01-sysctrl
+          - const: hisilicon,sysctrl
+
+  reg:
+    maxItems: 1
+
+  smp-offset:
+    description: |
+      offset in sysctrl for notifying slave cpu booting
+      cpu 1, reg;
+      cpu 2, reg + 0x4;
+      cpu 3, reg + 0x8;
+      If reg value is not zero, cpun exit wfi and go
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  resume-offset:
+    description: offset in sysctrl for notifying cpu0 when resume
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  reboot-offset:
+    description: offset in sysctrl for system reboot
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /* Hisilicon system controller */
+    system-controller@802000 {
+        compatible = "hisilicon,sysctrl", "syscon";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x802000 0x1000>;
+        reg = <0x802000 0x1000>;
+
+        smp-offset = <0x31c>;
+        resume-offset = <0x308>;
+        reboot-offset = <0x4>;
+
+        clock: clock@0 {
+            compatible = "hisilicon,hi3620-clock";
+            reg = <0 0x10000>;
+            #clock-cells = <1>;
+        };
+    };
+
+    /* HiP01 system controller */
+    system-controller@10000000 {
+        compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+        reg = <0x10000000 0x1000>;
+        reboot-offset = <0x4>;
+    };
+
+    /* Hi6220 system controller */
+    system-controller@f7030000 {
+        compatible = "hisilicon,hi6220-sysctrl", "syscon";
+        reg = <0xf7030000 0x2000>;
+        #clock-cells = <1>;
+    };
+
+    /* Hi3519 system controller */
+    system-controller@12010000 {
+        compatible = "hisilicon,hi3519-sysctrl", "syscon";
+        reg = <0x12010000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
new file mode 100644
index 0000000000..5408763220
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Platforms
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Hi3660 based boards.
+        items:
+          - const: hisilicon,hi3660-hikey960
+          - const: hisilicon,hi3660
+
+      - description: Hi3670 based boards.
+        items:
+          - const: hisilicon,hi3670-hikey970
+          - const: hisilicon,hi3670
+
+      - description: Hi3798cv200 based boards.
+        items:
+          - const: hisilicon,hi3798cv200-poplar
+          - const: hisilicon,hi3798cv200
+
+      - description: Hi4511 Board
+        items:
+          - const: hisilicon,hi3620-hi4511
+
+      - description: Hi6220 based boards.
+        items:
+          - const: hisilicon,hi6220-hikey
+          - const: hisilicon,hi6220
+
+      - description: HiP01 based boards.
+        items:
+          - const: hisilicon,hip01-ca9x2
+          - const: hisilicon,hip01
+
+      - description: HiP04 D01 Board
+        items:
+          - const: hisilicon,hip04-d01
+
+      - description: HiP05 D02 Board
+        items:
+          - const: hisilicon,hip05-d02
+
+      - description: HiP06 D03 Board
+        items:
+          - const: hisilicon,hip06-d03
+
+      - description: HiP07 D05 Board
+        items:
+          - const: hisilicon,hip07-d05
+
+      - description: SD5203 based boards
+        items:
+          - const: H836ASDJ
+          - const: hisilicon,sd5203
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
new file mode 100644
index 0000000000..3b36e683bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hisilicon/low-pin-count.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiP06 Low Pin Count device
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Hisilicon HiP06 SoCs implement a Low Pin Count (LPC) controller, which
+  provides I/O access to some legacy ISA devices.
+  HiP06 is based on arm64 architecture where there is no I/O space. So, the
+  I/O ports here are not CPU addresses, and there is no 'ranges' property in
+  LPC device node.
+
+properties:
+  $nodename:
+    pattern: '^isa@[0-9a-f]+$'
+    description: |
+      The node name before '@' must be "isa" to represent the binding stick
+      to the ISA/EISA binding specification.
+
+  compatible:
+    enum:
+      - hisilicon,hip06-lpc
+      - hisilicon,hip07-lpc
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    isa@a01b0000 {
+        compatible = "hisilicon,hip06-lpc";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        reg = <0xa01b0000 0x1000>;
+
+        ipmi0: bt@e4 {
+            compatible = "ipmi-bt";
+            device_type = "ipmi";
+            reg = <0x01 0xe4 0x04>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/hpe,gxp.yaml b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
new file mode 100644
index 0000000000..224bbcb93f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE BMC GXP platforms
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: GXP Based Boards
+        items:
+          - enum:
+              - hpe,gxp-dl360gen10
+          - const: hpe,gxp
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
new file mode 100644
index 0000000000..53d2ce02b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keem Bay platform
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - intel,keembay-evm
+      - const: intel,keembay
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
new file mode 100644
index 0000000000..2ee0c740eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA platform
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: AgileX boards
+        items:
+          - enum:
+              - intel,n5x-socdk
+              - intel,socfpga-agilex-n6000
+              - intel,socfpga-agilex-socdk
+          - const: intel,socfpga-agilex
+      - description: Agilex5 boards
+        items:
+          - enum:
+              - intel,socfpga-agilex5-socdk
+          - const: intel,socfpga-agilex5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
new file mode 100644
index 0000000000..553dcbc70e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - linksys,nslu2
+              - welltech,epbx100
+          - const: intel,ixp42x
+      - items:
+          - enum:
+              - gateworks,gw2358
+          - const: intel,ixp43x
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
new file mode 100644
index 0000000000..f310bad044
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keystone/keystone.txt
@@ -0,0 +1,42 @@
+TI Keystone Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Keystone2 based devices (TCI66xxK2H) SOC shall have the
+following properties.
+
+Required properties:
+ - compatible: All TI specific devices present in Keystone SOC should be in
+   the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
+   type UART should use the specified compatible for those devices.
+
+SoC families:
+
+- Keystone 2 generic SoC:
+   compatible = "ti,keystone"
+
+SoCs:
+
+- Keystone 2 Hawking/Kepler
+   compatible = "ti,k2hk", "ti,keystone"
+- Keystone 2 Lamarr
+   compatible = "ti,k2l", "ti,keystone"
+- Keystone 2 Edison
+   compatible = "ti,k2e", "ti,keystone"
+- K2G
+   compatible = "ti,k2g", "ti,keystone"
+
+Boards:
+-  Keystone 2 Hawking/Kepler EVM
+   compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"
+
+-  Keystone 2 Lamarr EVM
+   compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone"
+
+-  Keystone 2 Edison EVM
+   compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"
+
+-  K2G EVM
+   compatible = "ti,k2g-evm", "ti,k2g", "ti-keystone"
+
+-  K2G Industrial Communication Engine EVM
+   compatible = "ti,k2g-ice", "ti,k2g", "ti-keystone"
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
new file mode 100644
index 0000000000..4a323e8c78
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common K3 TI-SCI
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have a central System Controller Processor
+  that is responsible for managing various SoC-level resources like clocks,
+  resets, interrupts etc. The communication with that processor is performed
+  through the TI-SCI protocol.
+
+  Each specific device management node like a clock controller node, a reset
+  controller node or an interrupt-controller node should define a common set
+  of properties that enables them to implement the corresponding functionality
+  over the TI-SCI protocol. The following are some of the common properties
+  needed by such individual nodes. The required properties for each device
+  management node is defined in the respective binding.
+
+properties:
+  ti,sci:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should be a phandle to the TI-SCI System Controller node
+
+  ti,sci-dev-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should contain the TI-SCI device id corresponding to the device. Please
+      refer to the corresponding System Controller documentation for valid
+      values for the desired device.
+
+  ti,sci-proc-ids:
+    description: Should contain a single tuple of <proc_id host_id>.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: TI-SCI processor id for the remote processor device
+      - description: TI-SCI host id to which processor control ownership
+                     should be transferred to
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
new file mode 100644
index 0000000000..c24ad0968f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI controller
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Texas Instrument's processors including those belonging to Keystone generation
+  of processors have separate hardware entity which is now responsible for the
+  management of the System on Chip (SoC) system. These include various system
+  level functions as well.
+
+  An example of such an SoC is K2G, which contains the system control hardware
+  block called Power Management Micro Controller (PMMC). This hardware block is
+  initialized early into boot process and provides services to Operating Systems
+  on multiple processors including ones running Linux.
+
+  See http://processors.wiki.ti.com/index.php/TISCI for protocol definition.
+
+  The TI-SCI node describes the Texas Instrument's System Controller entity node.
+  This parent node may optionally have additional children nodes which describe
+  specific functionality such as clocks, power domain, reset or additional
+  functionality as may be required for the SoC. This hierarchy also describes the
+  relationship between the TI-SCI parent node to the child node.
+
+properties:
+  $nodename:
+    pattern: "^system-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - description: System controller on TI 66AK2G SoC and other K3 SoCs
+        items:
+          - const: ti,k2g-sci
+      - description: System controller on TI AM654 SoC
+        items:
+          - const: ti,am654-sci
+
+  reg-names:
+    description: |
+      Specifies the debug messages memory mapped region that is optionally
+      made available from TI-SCI controller.
+    const: debug_messages
+
+  reg:
+    minItems: 1
+
+  mbox-names:
+    description: |
+      Specifies the mailboxes used to communicate with TI-SCI Controller
+      made available from TI-SCI controller.
+    items:
+      - const: rx
+      - const: tx
+
+  mboxes:
+    minItems: 2
+
+  ti,system-reboot-controller:
+    description: Determines If system reboot can be triggered by SoC reboot
+    type: boolean
+
+  ti,host-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Value corresponding to the host ID assigned by Firmware
+      for identification of host processing entities such as virtual machines.
+
+  power-controller:
+    type: object
+    $ref: /schemas/soc/ti/sci-pm-domain.yaml#
+
+  clock-controller:
+    type: object
+    $ref: /schemas/clock/ti,sci-clk.yaml#
+
+  reset-controller:
+    type: object
+    $ref: /schemas/reset/ti,sci-reset.yaml#
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    pmmc: system-controller@2921800 {
+      compatible = "ti,k2g-sci";
+      ti,system-reboot-controller;
+      mbox-names = "rx", "tx";
+      mboxes = <&msgmgr 5 2>,
+               <&msgmgr 0 0>;
+      reg-names = "debug_messages";
+      reg = <0x02921800 0x800>;
+    };
+
+  - |
+    dmsc: system-controller@44083000 {
+      compatible = "ti,k2g-sci";
+      ti,host-id = <12>;
+      mbox-names = "rx", "tx";
+      mboxes = <&secure_proxy_main 11>,
+               <&secure_proxy_main 13>;
+      reg-names = "debug_messages";
+      reg = <0x44083000 0x1000>;
+
+      k3_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <2>;
+      };
+
+      k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+      };
+
+      k3_reset: reset-controller {
+        compatible = "ti,sci-reset";
+        #reset-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
new file mode 100644
index 0000000000..c7c5eb48fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/linux,dummy-virt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU virt machine
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    const: linux,dummy-virt
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
new file mode 100644
index 0000000000..26eb9d3aa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
@@ -0,0 +1,16 @@
+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume@20980 {
+	compatible = "marvell,98dx3336-resume-ctrl";
+	reg = <0x20980 0x10>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
new file mode 100644
index 0000000000..64e8c73fc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
@@ -0,0 +1,23 @@
+Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
+----------------------------------------------------------------------
+
+Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx3236"
+
+In addition, boards using the Marvell 98DX3336 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx3336"
+
+In addition, boards using the Marvell 98DX4251 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx4251"
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
new file mode 100644
index 0000000000..c83245065d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -0,0 +1,185 @@
+Marvell Armada AP80x System Controller
+======================================
+
+The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
+7K/8K/931x SoCs. It contains system controllers, which provide several
+registers giving access to numerous features: clocks, pin-muxing and
+many other SoC configuration items. This DT binding allows to describe
+these system controllers.
+
+For the top level node:
+ - compatible: must be: "syscon", "simple-mfd";
+ - reg: register area of the AP80x system controller
+
+SYSTEM CONTROLLER 0
+===================
+
+Clocks:
+-------
+
+
+The Device Tree node representing the AP806/AP807 system controller
+provides a number of clocks:
+
+ - 0: reference clock of CPU cluster 0
+ - 1: reference clock of CPU cluster 1
+ - 2: fixed PLL at 1200 Mhz
+ - 3: MSS clock, derived from the fixed PLL
+
+Required properties:
+
+ - compatible: must be one of:
+   * "marvell,ap806-clock"
+   * "marvell,ap807-clock"
+ - #clock-cells: must be set to 1
+
+Pinctrl:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
+
+Required properties:
+- compatible must be "marvell,ap806-pinctrl",
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name	pins	functions
+================================================================================
+mpp0	0	gpio, sdio(clk), spi0(clk)
+mpp1	1	gpio, sdio(cmd), spi0(miso)
+mpp2	2	gpio, sdio(d0), spi0(mosi)
+mpp3	3	gpio, sdio(d1), spi0(cs0n)
+mpp4	4	gpio, sdio(d2), i2c0(sda)
+mpp5	5	gpio, sdio(d3), i2c0(sdk)
+mpp6	6	gpio, sdio(ds)
+mpp7	7	gpio, sdio(d4), uart1(rxd)
+mpp8	8	gpio, sdio(d5), uart1(txd)
+mpp9	9	gpio, sdio(d6), spi0(cs1n)
+mpp10	10	gpio, sdio(d7)
+mpp11	11	gpio, uart0(txd)
+mpp12	12	gpio, sdio(pw_off), sdio(hw_rst)
+mpp13	13	gpio
+mpp14	14	gpio
+mpp15	15	gpio
+mpp16	16	gpio
+mpp17	17	gpio
+mpp18	18	gpio
+mpp19	19	gpio, uart0(rxd), sdio(pw_off)
+
+GPIO:
+-----
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
+
+Required properties:
+
+- compatible: "marvell,armada-8k-gpio"
+
+- offset: offset address inside the syscon block
+
+Optional properties:
+
+- marvell,pwm-offset: offset address of PWM duration control registers inside
+  the syscon block
+
+Example:
+ap_syscon: system-controller@6f4000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f4000 0x1000>;
+
+	ap_clk: clock {
+		compatible = "marvell,ap806-clock";
+		#clock-cells = <1>;
+	};
+
+	ap_pinctrl: pinctrl {
+		compatible = "marvell,ap806-pinctrl";
+	};
+
+	ap_gpio: gpio {
+		compatible = "marvell,armada-8k-gpio";
+		offset = <0x1040>;
+		ngpios = <19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&ap_pinctrl 0 0 19>;
+		marvell,pwm-offset = <0x10c0>;
+		#pwm-cells = <2>;
+		clocks = <&ap_clk 3>;
+	};
+};
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal*.yaml
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+It is possible to setup an overheat interrupt by giving at least one
+critical point to any subnode of the thermal-zone node.
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-ap806-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- interrupts: overheat interrupt handle. Should point to line 18 of the
+  SEI irqchip. See interrupt-controller/interrupts.txt
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel, while positive
+  IDs refer to each CPU.
+
+Example:
+ap_syscon1: system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	ap_thermal: thermal-sensor@80 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x80 0x10>;
+		interrupt-parent = <&sei>;
+		interrupts = <18>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+Cluster clocks:
+---------------
+
+Device Tree Clock bindings for cluster clock of Marvell
+AP806/AP807. Each cluster contain up to 2 CPUs running at the same
+frequency.
+
+Required properties:
+ - compatible: must be one of:
+   * "marvell,ap806-cpu-clock"
+   * "marvell,ap807-cpu-clock"
+- #clock-cells : should be set to 1.
+
+- clocks : shall be the input parent clock(s) phandle for the clock
+           (one per cluster)
+
+- reg: register range associated with the cluster clocks
+
+ap_syscon1: system-controller@6f8000 {
+	compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	cpu_clk: clock-cpu@278 {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+		reg = <0x278 0xa30>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-370-xp-pmsu.txt b/Documentation/devicetree/bindings/arm/marvell/armada-370-xp-pmsu.txt
new file mode 100644
index 0000000000..26799ef562
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-370-xp-pmsu.txt
@@ -0,0 +1,21 @@
+Power Management Service Unit(PMSU)
+-----------------------------------
+Available on Marvell SOCs: Armada 370, Armada 38x and Armada XP
+
+Required properties:
+
+- compatible: should be one of:
+  - "marvell,armada-370-pmsu" for Armada 370 or Armada XP
+  - "marvell,armada-380-pmsu" for Armada 38x
+  - "marvell,armada-370-xp-pmsu" was used for Armada 370/XP but is now
+    deprecated and will be removed
+
+- reg: Should contain PMSU registers location and length.
+
+Example:
+
+armada-370-xp-pmsu@22000 {
+	compatible = "marvell,armada-370-pmsu";
+	reg = <0x22000 0x1000>;
+};
+
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt
new file mode 100644
index 0000000000..c6ed90ea6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-370-xp.txt
@@ -0,0 +1,24 @@
+Marvell Armada 370 and Armada XP Platforms Device Tree Bindings
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 370 and Armada XP families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada-370-xp"
+
+In addition, boards using the Marvell Armada 370 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada370"
+
+In addition, boards using the Marvell Armada XP SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp"
+
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-375.txt b/Documentation/devicetree/bindings/arm/marvell/armada-375.txt
new file mode 100644
index 0000000000..867d0b80cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-375.txt
@@ -0,0 +1,9 @@
+Marvell Armada 375 Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 375 family shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada375"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
new file mode 100644
index 0000000000..29fa93dad5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
@@ -0,0 +1,32 @@
+Power management
+----------------
+
+For power management (particularly DVFS and AVS), the North Bridge
+Power Management component is needed:
+
+Required properties:
+- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
+- reg            : the register start and length for the North Bridge
+		    Power Management
+
+Example:
+
+nb_pm: syscon@14000 {
+	compatible = "marvell,armada-3700-nb-pm", "syscon";
+	reg = <0x14000 0x60>;
+}
+
+AVS
+---
+
+For AVS an other component is needed:
+
+Required properties:
+- compatible     : should contain "marvell,armada-3700-avs", "syscon";
+- reg            : the register start and length for the AVS
+
+Example:
+avs: avs@11500 {
+	compatible = "marvell,armada-3700-avs", "syscon";
+	reg = <0x11500 0x40>;
+}
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
new file mode 100644
index 0000000000..6905d29f31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-37xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx Platforms
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Armada 3720 SoC boards
+        items:
+          - enum:
+              - cznic,turris-mox
+              - globalscale,espressobin
+              - marvell,armada-3720-db
+              - methode,edpu
+              - methode,udpu
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin boards
+        items:
+          - enum:
+              - globalscale,espressobin-emmc
+              - globalscale,espressobin-ultra
+              - globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin V7 boards
+        items:
+          - enum:
+              - globalscale,espressobin-v7-emmc
+          - const: globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 0000000000..8781073029
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+  datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+	compatible = "marvell,armada-380-mpcore-soc-ctrl";
+	reg = <0x20d20 0x6c>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt
new file mode 100644
index 0000000000..202953f188
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-38x.txt
@@ -0,0 +1,27 @@
+Marvell Armada 38x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 38x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada380"
+
+In addition, boards using the Marvell Armada 385 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada385"
+
+In addition, boards using the Marvell Armada 388 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada388"
+
+Example:
+
+compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
new file mode 100644
index 0000000000..89468664f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
@@ -0,0 +1,31 @@
+Marvell Armada 39x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 39x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada390"
+
+In addition, boards using the Marvell Armada 395 SoC shall have the
+following property before the common "marvell,armada390" one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada395"
+
+Example:
+
+compatible = "marvell,a395-gp", "marvell,armada395", "marvell,armada390";
+
+Boards using the Marvell Armada 398 SoC shall have the following
+property before the common "marvell,armada390" one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada398"
+
+Example:
+
+compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
new file mode 100644
index 0000000000..52d78521e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 7K/8K Platforms
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Armada 7020 SoC
+        items:
+          - const: marvell,armada7020
+          - const: marvell,armada-ap806-dual
+          - const: marvell,armada-ap806
+
+      - description: Armada 7040 SoC
+        items:
+          - const: marvell,armada7040
+          - const: marvell,armada-ap806-quad
+          - const: marvell,armada-ap806
+
+      - description: Armada 8020 SoC
+        items:
+          - const: marvell,armada8020
+          - const: marvell,armada-ap806-dual
+          - const: marvell,armada-ap806
+
+      - description: Armada 8040 SoC
+        items:
+          - const: marvell,armada8040
+          - const: marvell,armada-ap806-quad
+          - const: marvell,armada-ap806
+
+      - description: Armada CN9130 SoC with no external CP
+        items:
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description: Armada CN9131 SoC with one external CP
+        items:
+          - const: marvell,cn9131
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description: Armada CN9132 SoC with two external CPs
+        items:
+          - const: marvell,cn9132
+          - const: marvell,cn9131
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt b/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt
new file mode 100644
index 0000000000..f3e9624534
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-8kp.txt
@@ -0,0 +1,15 @@
+Marvell Armada 8KPlus Platforms Device Tree Bindings
+----------------------------------------------------
+
+Boards using a SoC of the Marvell Armada 8KP families must carry
+the following root node property:
+
+ - compatible, with one of the following values:
+
+   - "marvell,armada-8080", "marvell,armada-ap810-octa", "marvell,armada-ap810"
+     when the SoC being used is the Armada 8080
+
+Example:
+
+compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+	     "marvell,armada-ap810-octa", "marvell,armada-ap810"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-cpu-reset.txt b/Documentation/devicetree/bindings/arm/marvell/armada-cpu-reset.txt
new file mode 100644
index 0000000000..b63a7b6ab9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-cpu-reset.txt
@@ -0,0 +1,14 @@
+Marvell Armada CPU reset controller
+===================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-370-cpu-reset".
+
+- reg: should be register base and length as documented in the
+  datasheet for the CPU reset registers
+
+cpurst: cpurst@20800 {
+       compatible = "marvell,armada-370-cpu-reset";
+       reg = <0x20800 0x20>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell/coherency-fabric.txt b/Documentation/devicetree/bindings/arm/marvell/coherency-fabric.txt
new file mode 100644
index 0000000000..9b5c3f620e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/coherency-fabric.txt
@@ -0,0 +1,48 @@
+Coherency fabric
+----------------
+Available on Marvell SOCs: Armada 370, Armada 375, Armada 38x and Armada XP
+
+Required properties:
+
+- compatible: the possible values are:
+
+ * "marvell,coherency-fabric", to be used for the coherency fabric of
+   the Armada 370 and Armada XP.
+
+ * "marvell,armada-375-coherency-fabric", for the Armada 375 coherency
+   fabric.
+
+ * "marvell,armada-380-coherency-fabric", for the Armada 38x coherency
+   fabric.
+
+- reg: Should contain coherency fabric registers location and
+  length.
+
+ * For "marvell,coherency-fabric", the first pair for the coherency
+   fabric registers, second pair for the per-CPU fabric registers.
+
+ * For "marvell,armada-375-coherency-fabric", only one pair is needed
+   for the per-CPU fabric registers.
+
+ * For "marvell,armada-380-coherency-fabric", only one pair is needed
+   for the per-CPU fabric registers.
+
+Optional properties:
+
+- broken-idle: boolean to set when the Idle mode is not supported by the
+  hardware.
+
+Examples:
+
+coherency-fabric@d0020200 {
+	compatible = "marvell,coherency-fabric";
+	reg = <0xd0020200 0xb0>,
+		<0xd0021810 0x1c>;
+
+};
+
+coherency-fabric@21810 {
+	compatible = "marvell,armada-375-coherency-fabric";
+	reg = <0x21810 0x1c>;
+};
+
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
new file mode 100644
index 0000000000..9d5d70c980
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -0,0 +1,234 @@
+Marvell Armada CP110 System Controller
+======================================
+
+The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
+
+For the top level node:
+ - compatible: must be: "syscon", "simple-mfd";
+ - reg: register area of the CP110 system controller
+
+SYSTEM CONTROLLER 0
+===================
+
+Clocks:
+-------
+
+The Device Tree node representing this System Controller 0 provides a
+number of clocks:
+
+ - a set of core clocks
+ - a set of gateable clocks
+
+Those clocks can be referenced by other Device Tree nodes using two
+cells:
+ - The first cell must be 0 or 1. 0 for the core clocks and 1 for the
+   gateable clocks.
+ - The second cell identifies the particular core clock or gateable
+   clocks.
+
+The following clocks are available:
+ - Core clocks
+   - 0 0	APLL
+   - 0 1	PPv2 core
+   - 0 2	EIP
+   - 0 3	Core
+   - 0 4	NAND core
+   - 0 5	SDIO core
+ - Gateable clocks
+   - 1 0	Audio
+   - 1 1	Comm Unit
+   - 1 2	NAND
+   - 1 3	PPv2
+   - 1 4	SDIO
+   - 1 5	MG Domain
+   - 1 6	MG Core
+   - 1 7	XOR1
+   - 1 8	XOR0
+   - 1 9	GOP DP
+   - 1 11	PCIe x1 0
+   - 1 12	PCIe x1 1
+   - 1 13	PCIe x4
+   - 1 14	PCIe / XOR
+   - 1 15	SATA
+   - 1 16	SATA USB
+   - 1 17	Main
+   - 1 18	SD/MMC/GOP
+   - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
+   - 1 22	USB3H0
+   - 1 23	USB3H1
+   - 1 24	USB3 Device
+   - 1 25	EIP150
+   - 1 26	EIP197
+
+Required properties:
+
+ - compatible: must be:
+     "marvell,cp110-clock"
+ - #clock-cells: must be set to 2
+
+Pinctrl:
+--------
+
+For common binding part and usage, refer to the file
+Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
+
+Required properties:
+
+- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl",
+  "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl"
+  depending on the specific variant of the SoC being used.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name	pins	functions
+================================================================================
+mpp0	0	gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
+mpp1	1	gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
+mpp2	2	gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
+mpp3	3	gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
+mpp4	4	gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
+mpp5	5	gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
+mpp6	6	gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
+mpp7	7	gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
+mpp8	8	gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
+mpp9	9	gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
+mpp10	10	gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
+mpp11	11	gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
+mpp12	12	gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
+mpp13	13	gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
+mpp14	14	gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
+mpp15	15	gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
+mpp16	16	gpio, dev(ad6), spi1(clk), mss_spi(clk)
+mpp17	17	gpio, dev(ad5), ge0(txd3)
+mpp18	18	gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
+mpp19	19	gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
+mpp20	20	gpio, dev(ad2), ge0(txd0)
+mpp21	21	gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
+mpp22	22	gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
+mpp23	23	gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
+mpp24	24	gpio, dev(a0), au(i2slrclk)
+mpp25	25	gpio, dev(oen), au(i2sdo_spdifo)
+mpp26	26	gpio, dev(wen0), au(i2sbclk)
+mpp27	27	gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
+mpp28	28	gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
+mpp29	29	gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
+mpp30	30	gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
+mpp31	31	gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
+mpp32	32	gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
+mpp33	33	gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
+mpp34	34	gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
+mpp35	35	gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
+mpp36	36	gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
+mpp37	37	gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
+mpp38	38	gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
+mpp39	39	gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
+mpp40	40	gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
+mpp41	41	gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
+mpp42	42	gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
+mpp43	43	gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
+mpp44	44	gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
+mpp45	45	gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
+mpp46	46	gpio, ge1(txd1), uart1(rts)
+mpp47	47	gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
+mpp48	48	gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
+mpp49	49	gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
+mpp50	50	gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
+mpp51	51	gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
+mpp52	52	gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
+mpp53	53	gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
+mpp54	54	gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect)
+mpp55	55	gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect)
+mpp56	56	gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
+mpp57	57	gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
+mpp58	58	gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
+mpp59	59	gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
+mpp60	60	gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
+mpp61	61	gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
+mpp62	62	gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
+
+GPIO:
+-----
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
+
+Required properties:
+
+- compatible: "marvell,armada-8k-gpio"
+
+- offset: offset address inside the syscon block
+
+Example:
+
+CP110_LABEL(syscon0): system-controller@440000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x440000 0x1000>;
+
+	CP110_LABEL(clk): clock {
+		compatible = "marvell,cp110-clock";
+		#clock-cells = <2>;
+	};
+
+	CP110_LABEL(pinctrl): pinctrl {
+		compatible = "marvell,armada-8k-cpm-pinctrl";
+	};
+
+	CP110_LABEL(gpio1): gpio@100 {
+		compatible = "marvell,armada-8k-gpio";
+		offset = <0x100>;
+		ngpios = <32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
+	};
+
+};
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+It is possible to setup an overheat interrupt by giving at least one
+critical point to any subnode of the thermal-zone node.
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal*.yaml
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-cp110-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- interrupts-extended: overheat interrupt handle. Should point to
+  a line of the ICU-SEI irqchip (116 is what is usually used by the
+  firmware). The ICU-SEI will redirect towards interrupt line #37 of the
+  AP SEI which is shared across all CPs.
+  See interrupt-controller/interrupts.txt
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel.
+
+Example:
+CP110_LABEL(syscon1): system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	CP110_LABEL(thermal): thermal-sensor@70 {
+		compatible = "marvell,armada-cp110-thermal";
+		reg = <0x70 0x10>;
+		interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt
new file mode 100644
index 0000000000..98cce9a653
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/kirkwood.txt
@@ -0,0 +1,27 @@
+Marvell Kirkwood Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwood
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,kirkwood";
+
+In order to support the kirkwood cpufreq driver, there must be a node
+cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave",
+where the "powersave" clock is a gating clock used to switch the CPU
+between the "cpu_clk" and the "ddrclk".
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+		      device_type = "cpu";
+		      compatible = "marvell,sheeva-88SV131";
+		      clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+		      clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
new file mode 100644
index 0000000000..8960fb8b2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alleycat5/5X Platforms
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Alleycat5 (98DX25xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5
+          - const: marvell,ac5
+
+      - description: Alleycat5X (98DX35xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5x
+          - const: marvell,ac5x
+          - const: marvell,ac5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
new file mode 100644
index 0000000000..aaaf64c56e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,dove.txt
@@ -0,0 +1,22 @@
+Marvell Dove Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a Marvell Dove SoC shall have the following properties:
+
+Required root node property:
+- compatible: must contain "marvell,dove";
+
+* Global Configuration registers
+
+Global Configuration registers of Dove SoC are shared by a syscon node.
+
+Required properties:
+- compatible: must contain "marvell,dove-global-config" and "syscon".
+- reg: base address and size of the Global Configuration registers.
+
+Example:
+
+gconf: global-config@e802c {
+	compatible = "marvell,dove-global-config", "syscon";
+	reg = <0xe802c 0x14>;
+};
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt
new file mode 100644
index 0000000000..7d28fe4bf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt
@@ -0,0 +1,105 @@
+Marvell Kirkwood SoC Family Device Tree Bindings
+------------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
+
+* Required root node properties:
+compatible: must contain "marvell,kirkwood"
+
+In addition, the above compatible shall be extended with the specific
+SoC. Currently known SoC compatibles are:
+
+"marvell,kirkwood-88f6192"
+"marvell,kirkwood-88f6281"
+"marvell,kirkwood-88f6282"
+"marvell,kirkwood-88f6283"
+"marvell,kirkwood-88f6702"
+"marvell,kirkwood-98DX4122"
+
+And in addition, the compatible shall be extended with the specific
+board. Currently known boards are:
+
+"buffalo,linkstation-lsqvl"
+"buffalo,linkstation-lsvl"
+"buffalo,linkstation-lswsxl"
+"buffalo,linkstation-lswxl"
+"buffalo,linkstation-lswvl"
+"buffalo,lschlv2"
+"buffalo,lsxhl"
+"buffalo,lsxl"
+"cloudengines,pogo02"
+"cloudengines,pogoplugv4"
+"dlink,dns-320"
+"dlink,dns-320-a1"
+"dlink,dns-325"
+"dlink,dns-325-a1"
+"dlink,dns-kirkwood"
+"excito,b3"
+"globalscale,dreamplug-003-ds2001"
+"globalscale,guruplug"
+"globalscale,guruplug-server-plus"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug-esata"
+"globalscale,sheevaplug-esata-rev13"
+"iom,iconnect"
+"iom,iconnect-1.1"
+"iom,ix2-200"
+"keymile,km_kirkwood"
+"lacie,cloudbox"
+"lacie,inetspace_v2"
+"lacie,laplug"
+"lacie,nas2big"
+"lacie,netspace_lite_v2"
+"lacie,netspace_max_v2"
+"lacie,netspace_mini_v2"
+"lacie,netspace_v2"
+"marvell,db-88f6281-bp"
+"marvell,db-88f6282-bp"
+"marvell,mv88f6281gtw-ge"
+"marvell,rd88f6281"
+"marvell,rd88f6281"
+"marvell,rd88f6281-a0"
+"marvell,rd88f6281-a1"
+"mpl,cec4"
+"mpl,cec4-10"
+"netgear,readynas"
+"netgear,readynas"
+"netgear,readynas-duo-v2"
+"netgear,readynas-nv+-v2"
+"plathome,openblocks-a6"
+"plathome,openblocks-a7"
+"raidsonic,ib-nas6210"
+"raidsonic,ib-nas6210-b"
+"raidsonic,ib-nas6220"
+"raidsonic,ib-nas6220-b"
+"raidsonic,ib-nas62x0"
+"seagate,dockstar"
+"seagate,goflexnet"
+"synology,ds109"
+"synology,ds110jv10"
+"synology,ds110jv20"
+"synology,ds110jv30"
+"synology,ds111"
+"synology,ds209"
+"synology,ds210jv10"
+"synology,ds210jv20"
+"synology,ds212"
+"synology,ds212jv10"
+"synology,ds212jv20"
+"synology,ds212pv10"
+"synology,ds409"
+"synology,ds409slim"
+"synology,ds410j"
+"synology,ds411"
+"synology,ds411j"
+"synology,ds411slim"
+"synology,ds413jv10"
+"synology,rs212"
+"synology,rs409"
+"synology,rs411"
+"synology,rs812"
+"usi,topkick"
+"usi,topkick-1281P2"
+"zyxel,nsa310"
+"zyxel,nsa310a"
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
new file mode 100644
index 0000000000..748a8f2874
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt
@@ -0,0 +1,25 @@
+Marvell Orion SoC Family Device Tree Bindings
+---------------------------------------------
+
+Boards with a SoC of the Marvell Orion family, eg 88f5181
+
+* Required root node properties:
+compatible: must contain "marvell,orion5x"
+
+In addition, the above compatible shall be extended with the specific
+SoC. Currently known SoC compatibles are:
+
+"marvell,orion5x-88f5181"
+"marvell,orion5x-88f5182"
+
+And in addition, the compatible shall be extended with the specific
+board. Currently known boards are:
+
+"buffalo,lsgl"
+"buffalo,lswsgl"
+"buffalo,lswtgl"
+"lacie,ethernet-disk-mini-v2"
+"lacie,d2-network"
+"marvell,rd-88f5182-nas"
+"maxtor,shared-storage-2"
+"netgear,wnr854t"
diff --git a/Documentation/devicetree/bindings/arm/marvell/mvebu-cpu-config.txt b/Documentation/devicetree/bindings/arm/marvell/mvebu-cpu-config.txt
new file mode 100644
index 0000000000..2cdcd716da
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/mvebu-cpu-config.txt
@@ -0,0 +1,20 @@
+MVEBU CPU Config registers
+--------------------------
+
+MVEBU (Marvell SOCs: Armada 370/XP)
+
+Required properties:
+
+- compatible: one of:
+	- "marvell,armada-370-cpu-config"
+	- "marvell,armada-xp-cpu-config"
+
+- reg: Should contain CPU config registers location and length, in
+  their per-CPU variant
+
+Example:
+
+	cpu-config@21000 {
+		compatible = "marvell,armada-xp-cpu-config";
+		reg = <0x21000 0x8>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/marvell/mvebu-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/mvebu-system-controller.txt
new file mode 100644
index 0000000000..d24ab2ebf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/mvebu-system-controller.txt
@@ -0,0 +1,18 @@
+MVEBU System Controller
+-----------------------
+MVEBU (Marvell SOCs: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+
+Required properties:
+
+- compatible: one of:
+	- "marvell,orion-system-controller"
+	- "marvell,armada-370-xp-system-controller"
+	- "marvell,armada-375-system-controller"
+- reg: Should contain system controller registers location and length.
+
+Example:
+
+	system-controller@d0018200 {
+		compatible = "marvell,armada-370-xp-system-controller";
+		reg = <0xd0018200 0x500>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
new file mode 100644
index 0000000000..ae12b1cab9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC based Platforms
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+description: |
+  Boards with a MediaTek SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-evb
+          - const: mediatek,mt2701
+
+      - items:
+          - enum:
+              - mediatek,mt2712-evb
+          - const: mediatek,mt2712
+      - items:
+          - enum:
+              - mediatek,mt6580-evbp1
+          - const: mediatek,mt6580
+      - items:
+          - enum:
+              - prestigio,pmt5008-3g
+          - const: mediatek,mt6582
+      - items:
+          - enum:
+              - fairphone,fp1
+              - mundoreader,bq-aquaris5
+          - const: mediatek,mt6589
+      - items:
+          - enum:
+              - mediatek,mt6592-evb
+          - const: mediatek,mt6592
+      - items:
+          - enum:
+              - mediatek,mt6755-evb
+          - const: mediatek,mt6755
+      - items:
+          - enum:
+              - mediatek,mt6765-evb
+          - const: mediatek,mt6765
+      - items:
+          - enum:
+              - mediatek,mt6779-evb
+          - const: mediatek,mt6779
+      - items:
+          - enum:
+              - mediatek,mt6795-evb
+              - sony,xperia-m5
+          - const: mediatek,mt6795
+      - items:
+          - enum:
+              - archermind,mt6797-x20-dev
+              - mediatek,mt6797-evb
+          - const: mediatek,mt6797
+      - items:
+          - enum:
+              - bananapi,bpi-r64
+              - mediatek,mt7622-rfb1
+          - const: mediatek,mt7622
+      - items:
+          - enum:
+              - mediatek,mt7623a-rfb-emmc
+              - mediatek,mt7623a-rfb-nand
+              - mediatek,mt7623n-rfb-emmc
+              - bananapi,bpi-r2
+          - const: mediatek,mt7623
+
+      - items:
+          - enum:
+              - mediatek,mt7629-rfb
+          - const: mediatek,mt7629
+      - items:
+          - enum:
+              - bananapi,bpi-r3
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
+      - items:
+          - enum:
+              - mediatek,mt8127-moose
+          - const: mediatek,mt8127
+      - items:
+          - enum:
+              - mediatek,mt8135-evbp1
+          - const: mediatek,mt8135
+      - items:
+          - enum:
+              - mediatek,mt8167-pumpkin
+          - const: mediatek,mt8167
+      - description: Google Elm (Acer Chromebook R13)
+        items:
+          - const: google,elm-rev8
+          - const: google,elm-rev7
+          - const: google,elm-rev6
+          - const: google,elm-rev5
+          - const: google,elm-rev4
+          - const: google,elm-rev3
+          - const: google,elm
+          - const: mediatek,mt8173
+      - description: Google Hana (Lenovo Chromebook N23 Yoga, C330, 300e,...)
+        items:
+          - const: google,hana-rev6
+          - const: google,hana-rev5
+          - const: google,hana-rev4
+          - const: google,hana-rev3
+          - const: google,hana
+          - const: mediatek,mt8173
+      - description: Google Hana rev7 (Poin2 Chromebook 11C)
+        items:
+          - const: google,hana-rev7
+          - const: mediatek,mt8173
+      - items:
+          - enum:
+              - mediatek,mt8173-evb
+          - const: mediatek,mt8173
+      - items:
+          - enum:
+              - mediatek,mt8183-evb
+          - const: mediatek,mt8183
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
+      - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
+        items:
+          - const: google,burnet
+          - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - enum:
+              - google,krane-sku0
+              - google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
+      - description: Google Cozmo (Acer Chromebook 314)
+        items:
+          - const: google,cozmo
+          - const: mediatek,mt8183
+      - description: Google Damu (ASUS Chromebook Flip CM3)
+        items:
+          - const: google,damu
+          - const: mediatek,mt8183
+      - description: Google Fennel (Lenovo IdeaPad 3 Chromebook)
+        items:
+          - enum:
+              - google,fennel-sku0
+              - google,fennel-sku1
+              - google,fennel-sku2
+              - google,fennel-sku6
+              - google,fennel-sku7
+          - const: google,fennel
+          - const: mediatek,mt8183
+      - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311)
+        items:
+          - enum:
+              - google,juniper-sku16
+              - google,juniper-sku17
+          - const: google,juniper
+          - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3
+          - const: google,kakadu-rev2
+          - const: google,kakadu
+          - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3-sku22
+          - const: google,kakadu-rev2-sku22
+          - const: google,kakadu
+          - const: mediatek,mt8183
+      - description: Google Kappa (HP Chromebook 11a)
+        items:
+          - const: google,kappa
+          - const: mediatek,mt8183
+      - description: Google Kodama (Lenovo 10e Chromebook Tablet)
+        items:
+          - enum:
+              - google,kodama-sku16
+              - google,kodama-sku272
+              - google,kodama-sku288
+              - google,kodama-sku32
+          - const: google,kodama
+          - const: mediatek,mt8183
+      - description: Google Willow (Acer Chromebook 311 C722/C722T)
+        items:
+          - enum:
+              - google,willow-sku0
+              - google,willow-sku1
+          - const: google,willow
+          - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8183-pumpkin
+          - const: mediatek,mt8183
+      - items:
+          - enum:
+              - mediatek,mt8365-evk
+          - const: mediatek,mt8365
+      - items:
+          - enum:
+              - mediatek,mt8516-pumpkin
+          - const: mediatek,mt8516
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
new file mode 100644
index 0000000000..699776be1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt
@@ -0,0 +1,39 @@
+MediaTek AUDSYS controller
+============================
+
+The MediaTek AUDSYS controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt6765-audsys", "syscon"
+	- "mediatek,mt6779-audio", "syscon"
+	- "mediatek,mt7622-audsys", "syscon"
+	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt8167-audiosys", "syscon"
+	- "mediatek,mt8183-audiosys", "syscon"
+	- "mediatek,mt8192-audsys", "syscon"
+	- "mediatek,mt8516-audsys", "syscon"
+- #clock-cells: Must be 1
+
+The AUDSYS controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Required sub-nodes:
+-------
+For common binding part and usage, refer to
+../sonud/mt2701-afe-pcm.txt.
+
+Example:
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt7622-audsys", "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
new file mode 100644
index 0000000000..149567a382
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt
@@ -0,0 +1,24 @@
+Mediatek bdpsys controller
+============================
+
+The Mediatek bdpsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-bdpsys", "syscon"
+	- "mediatek,mt2712-bdpsys", "syscon"
+	- "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
+- #clock-cells: Must be 1
+
+The bdpsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+bdpsys: clock-controller@1c000000 {
+	compatible = "mediatek,mt2701-bdpsys", "syscon";
+	reg = <0 0x1c000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
new file mode 100644
index 0000000000..a0ce82085a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt
@@ -0,0 +1,24 @@
+MediaTek CAMSYS controller
+============================
+
+The MediaTek camsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-camsys", "syscon"
+	- "mediatek,mt6779-camsys", "syscon"
+	- "mediatek,mt8183-camsys", "syscon"
+- #clock-cells: Must be 1
+
+The camsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+camsys: camsys@1a000000  {
+	compatible = "mediatek,mt8183-camsys", "syscon";
+	reg = <0 0x1a000000  0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
new file mode 100644
index 0000000000..eccd4b706a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -0,0 +1,29 @@
+Mediatek ethsys controller
+============================
+
+The Mediatek ethsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-ethsys", "syscon"
+	- "mediatek,mt7622-ethsys", "syscon"
+	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
+	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7981-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The ethsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+ethsys: clock-controller@1b000000 {
+	compatible = "mediatek,mt2701-ethsys", "syscon";
+	reg = <0 0x1b000000 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
new file mode 100644
index 0000000000..7de43bf41f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,g3dsys.txt
@@ -0,0 +1,30 @@
+MediaTek g3dsys controller
+============================
+
+The MediaTek g3dsys controller provides various clocks and reset controller to
+the GPU.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-g3dsys", "syscon":
+		for MT2701 SoC
+	- "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon":
+		for MT7623 SoC
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The g3dsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+g3dsys: clock-controller@13000000 {
+	compatible = "mediatek,mt7623-g3dsys",
+		     "mediatek,mt2701-g3dsys",
+		     "syscon";
+	reg = <0 0x13000000 0 0x200>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
new file mode 100644
index 0000000000..323905af82
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt
@@ -0,0 +1,26 @@
+Mediatek hifsys controller
+============================
+
+The Mediatek hifsys controller provides various clocks and reset
+outputs to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2701-hifsys", "syscon"
+	- "mediatek,mt7622-hifsys", "syscon"
+	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
+- #clock-cells: Must be 1
+
+The hifsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+hifsys: clock-controller@1a000000 {
+	compatible = "mediatek,mt2701-hifsys", "syscon";
+	reg = <0 0x1a000000 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
new file mode 100644
index 0000000000..dce4c92419
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -0,0 +1,30 @@
+Mediatek imgsys controller
+============================
+
+The Mediatek imgsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt2701-imgsys", "syscon"
+	- "mediatek,mt2712-imgsys", "syscon"
+	- "mediatek,mt6765-imgsys", "syscon"
+	- "mediatek,mt6779-imgsys", "syscon"
+	- "mediatek,mt6797-imgsys", "syscon"
+	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
+	- "mediatek,mt8167-imgsys", "syscon"
+	- "mediatek,mt8173-imgsys", "syscon"
+	- "mediatek,mt8183-imgsys", "syscon"
+- #clock-cells: Must be 1
+
+The imgsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+imgsys: clock-controller@15000000 {
+	compatible = "mediatek,mt8173-imgsys", "syscon";
+	reg = <0 0x15000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
new file mode 100644
index 0000000000..ea98043c6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Infrastructure System Configuration Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The Mediatek infracfg controller provides various clocks and reset outputs
+  to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>,
+  and reset values in <dt-bindings/reset/mt*-reset.h> and
+  <dt-bindings/reset/mt*-resets.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-infracfg
+              - mediatek,mt2712-infracfg
+              - mediatek,mt6765-infracfg
+              - mediatek,mt6795-infracfg
+              - mediatek,mt6779-infracfg_ao
+              - mediatek,mt6797-infracfg
+              - mediatek,mt7622-infracfg
+              - mediatek,mt7629-infracfg
+              - mediatek,mt7981-infracfg
+              - mediatek,mt7986-infracfg
+              - mediatek,mt8135-infracfg
+              - mediatek,mt8167-infracfg
+              - mediatek,mt8173-infracfg
+              - mediatek,mt8183-infracfg
+              - mediatek,mt8516-infracfg
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-infracfg
+          - const: mediatek,mt2701-infracfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2701-infracfg
+          - mediatek,mt2712-infracfg
+          - mediatek,mt6795-infracfg
+          - mediatek,mt7622-infracfg
+          - mediatek,mt7986-infracfg
+          - mediatek,mt8135-infracfg
+          - mediatek,mt8173-infracfg
+          - mediatek,mt8183-infracfg
+then:
+  required:
+    - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    infracfg: clock-controller@10001000 {
+        compatible = "mediatek,mt8173-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt
new file mode 100644
index 0000000000..2ce889b023
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipesys.txt
@@ -0,0 +1,22 @@
+Mediatek ipesys controller
+============================
+
+The Mediatek ipesys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6779-ipesys", "syscon"
+- #clock-cells: Must be 1
+
+The ipesys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+ipesys: clock-controller@1b000000 {
+	compatible = "mediatek,mt6779-ipesys", "syscon";
+	reg = <0 0x1b000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt
new file mode 100644
index 0000000000..aabc8c5c8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ipu.txt
@@ -0,0 +1,43 @@
+Mediatek IPU controller
+============================
+
+The Mediatek ipu controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt8183-ipu_conn", "syscon"
+	- "mediatek,mt8183-ipu_adl", "syscon"
+	- "mediatek,mt8183-ipu_core0", "syscon"
+	- "mediatek,mt8183-ipu_core1", "syscon"
+- #clock-cells: Must be 1
+
+The ipu controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+ipu_conn: syscon@19000000 {
+	compatible = "mediatek,mt8183-ipu_conn", "syscon";
+	reg = <0 0x19000000 0 0x1000>;
+	#clock-cells = <1>;
+};
+
+ipu_adl: syscon@19010000 {
+	compatible = "mediatek,mt8183-ipu_adl", "syscon";
+	reg = <0 0x19010000 0 0x1000>;
+	#clock-cells = <1>;
+};
+
+ipu_core0: syscon@19180000 {
+	compatible = "mediatek,mt8183-ipu_core0", "syscon";
+	reg = <0 0x19180000 0 0x1000>;
+	#clock-cells = <1>;
+};
+
+ipu_core1: syscon@19280000 {
+	compatible = "mediatek,mt8183-ipu_core1", "syscon";
+	reg = <0 0x19280000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
new file mode 100644
index 0000000000..2df799cd06
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt
@@ -0,0 +1,22 @@
+Mediatek jpgdecsys controller
+============================
+
+The Mediatek jpgdecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt2712-jpgdecsys", "syscon"
+- #clock-cells: Must be 1
+
+The jpgdecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+jpgdecsys: syscon@19000000 {
+	compatible = "mediatek,mt2712-jpgdecsys", "syscon";
+	reg = <0 0x19000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
new file mode 100644
index 0000000000..2b882b7ca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt
@@ -0,0 +1,23 @@
+Mediatek mcucfg controller
+============================
+
+The Mediatek mcucfg controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt2712-mcucfg", "syscon"
+	- "mediatek,mt8183-mcucfg", "syscon"
+- #clock-cells: Must be 1
+
+The mcucfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+mcucfg: syscon@10220000 {
+	compatible = "mediatek,mt2712-mcucfg", "syscon";
+	reg = <0 0x10220000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
new file mode 100644
index 0000000000..054424fb64
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt
@@ -0,0 +1,25 @@
+Mediatek mfgcfg controller
+============================
+
+The Mediatek mfgcfg controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt2712-mfgcfg", "syscon"
+	- "mediatek,mt6779-mfgcfg", "syscon"
+	- "mediatek,mt8167-mfgcfg", "syscon"
+	- "mediatek,mt8183-mfgcfg", "syscon"
+- #clock-cells: Must be 1
+
+The mfgcfg controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+mfgcfg: syscon@13000000 {
+	compatible = "mediatek,mt2712-mfgcfg", "syscon";
+	reg = <0 0x13000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt
new file mode 100644
index 0000000000..1c671943ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt
@@ -0,0 +1,28 @@
+Mediatek mipi0a (mipi_rx_ana_csi0a) controller
+============================
+
+The Mediatek mipi0a controller provides various clocks
+to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-mipi0a", "syscon"
+- #clock-cells: Must be 1
+
+The mipi0a controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+The mipi0a controller also uses the common power domain from
+Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+The available power domains are defined in dt-bindings/power/mt*-power.h.
+
+Example:
+
+mipi0a: clock-controller@11c10000 {
+	compatible = "mediatek,mt6765-mipi0a", "syscon";
+	reg = <0 0x11c10000 0 0x1000>;
+	power-domains = <&scpsys MT6765_POWER_DOMAIN_CAM>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
new file mode 100644
index 0000000000..536f5a5ebd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mmsys controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The MediaTek mmsys system controller provides clock control, routing control,
+  and miscellaneous control in mmsys partition.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-mmsys
+              - mediatek,mt2712-mmsys
+              - mediatek,mt6765-mmsys
+              - mediatek,mt6779-mmsys
+              - mediatek,mt6795-mmsys
+              - mediatek,mt6797-mmsys
+              - mediatek,mt8167-mmsys
+              - mediatek,mt8173-mmsys
+              - mediatek,mt8183-mmsys
+              - mediatek,mt8186-mmsys
+              - mediatek,mt8188-vdosys0
+              - mediatek,mt8192-mmsys
+              - mediatek,mt8195-vdosys1
+              - mediatek,mt8195-vppsys0
+              - mediatek,mt8195-vppsys1
+              - mediatek,mt8365-mmsys
+          - const: syscon
+
+      - description: vdosys0 and vdosys1 are 2 display HW pipelines,
+                     so mt8195 binding should be deprecated.
+        deprecated: true
+        items:
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
+      - items:
+          - const: mediatek,mt7623-mmsys
+          - const: mediatek,mt2701-mmsys
+          - const: syscon
+
+      - items:
+          - const: mediatek,mt8195-vdosys0
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings
+      of the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mboxes:
+    description:
+      Using mailbox to communicate with GCE, it should have this
+      property and list of phandle, mailbox specifiers. See
+      Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    mmsys: syscon@14000000 {
+        compatible = "mediatek,mt8173-mmsys", "syscon";
+        reg = <0x14000000 0x1000>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+                 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
new file mode 100644
index 0000000000..d89848a8f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIE Mirror Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek PCIE mirror provides a configuration interface for PCIE
+  controller on MT7622 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-pcie-mirror
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_mirror: pcie-mirror@10000400 {
+        compatible = "mediatek,mt7622-pcie-mirror", "syscon";
+        reg = <0 0x10000400 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
new file mode 100644
index 0000000000..28ded09d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek wireless ethernet dispatch controller can be configured to
+  intercept and handle access to the WLAN DMA queues and PCIe interrupts
+  and implement hardware flow offloading from ethernet to WLAN.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-wed
+          - mediatek,mt7981-wed
+          - mediatek,mt7986-wed
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    items:
+      - description: firmware EMI region
+      - description: firmware ILM region
+      - description: firmware DLM region
+      - description: firmware CPU DATA region
+      - description: firmware BOOT region
+
+  memory-region-names:
+    items:
+      - const: wo-emi
+      - const: wo-ilm
+      - const: wo-dlm
+      - const: wo-data
+      - const: wo-boot
+
+  mediatek,wo-ccif:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: mediatek wed-wo controller interface.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-wed
+    then:
+      properties:
+        memory-region-names: false
+        memory-region: false
+        mediatek,wo-ccif: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed0: wed@1020a000 {
+        compatible = "mediatek,mt7622-wed","syscon";
+        reg = <0 0x1020a000 0 0x1000>;
+        interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      wed@15010000 {
+        compatible = "mediatek,mt7986-wed", "syscon";
+        reg = <0 0x15010000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+
+        memory-region = <&wo_emi>, <&wo_ilm>, <&wo_dlm>,
+                        <&wo_data>, <&wo_boot>;
+        memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+                              "wo-data", "wo-boot";
+        mediatek,wo-ccif = <&wo_ccif0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
new file mode 100644
index 0000000000..82f64469a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIE WED Controller for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek WED PCIE provides a configuration interface for PCIE
+  controller on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wed-pcie
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed_pcie: wed-pcie@10003000 {
+        compatible = "mediatek,mt7986-wed-pcie",
+                     "syscon";
+        reg = <0 0x10003000 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
new file mode 100644
index 0000000000..7cd14b163a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-imp_iic_wrap
+          - mediatek,mt8186-mfgsys
+          - mediatek,mt8186-wpesys
+          - mediatek,mt8186-imgsys1
+          - mediatek,mt8186-imgsys2
+          - mediatek,mt8186-vdecsys
+          - mediatek,mt8186-vencsys
+          - mediatek,mt8186-camsys
+          - mediatek,mt8186-camsys_rawa
+          - mediatek,mt8186-camsys_rawb
+          - mediatek,mt8186-mdpsys
+          - mediatek,mt8186-ipesys
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imp_iic_wrap: clock-controller@11017000 {
+        compatible = "mediatek,mt8186-imp_iic_wrap";
+        reg = <0x11017000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
new file mode 100644
index 0000000000..64c7694166
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-mcusys
+          - mediatek,mt8186-topckgen
+          - mediatek,mt8186-infracfg_ao
+          - mediatek,mt8186-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8186-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
new file mode 100644
index 0000000000..dff4c8e8fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8192
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek functional clock controller provides various clocks on MT8192.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8192-scp_adsp
+          - mediatek,mt8192-imp_iic_wrap_c
+          - mediatek,mt8192-imp_iic_wrap_e
+          - mediatek,mt8192-imp_iic_wrap_s
+          - mediatek,mt8192-imp_iic_wrap_ws
+          - mediatek,mt8192-imp_iic_wrap_w
+          - mediatek,mt8192-imp_iic_wrap_n
+          - mediatek,mt8192-msdc_top
+          - mediatek,mt8192-mfgcfg
+          - mediatek,mt8192-imgsys
+          - mediatek,mt8192-imgsys2
+          - mediatek,mt8192-vdecsys_soc
+          - mediatek,mt8192-vdecsys
+          - mediatek,mt8192-vencsys
+          - mediatek,mt8192-camsys
+          - mediatek,mt8192-camsys_rawa
+          - mediatek,mt8192-camsys_rawb
+          - mediatek,mt8192-camsys_rawc
+          - mediatek,mt8192-ipesys
+          - mediatek,mt8192-mdpsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scp_adsp: clock-controller@10720000 {
+        compatible = "mediatek,mt8192-scp_adsp";
+        reg = <0x10720000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_c: clock-controller@11007000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_c";
+        reg = <0x11007000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_e: clock-controller@11cb1000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_e";
+        reg = <0x11cb1000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_s: clock-controller@11d03000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_s";
+        reg = <0x11d03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_ws: clock-controller@11d23000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_ws";
+        reg = <0x11d23000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_w: clock-controller@11e01000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_w";
+        reg = <0x11e01000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_n: clock-controller@11f02000 {
+        compatible = "mediatek,mt8192-imp_iic_wrap_n";
+        reg = <0x11f02000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    msdc_top: clock-controller@11f10000 {
+        compatible = "mediatek,mt8192-msdc_top";
+        reg = <0x11f10000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mfgcfg: clock-controller@13fbf000 {
+        compatible = "mediatek,mt8192-mfgcfg";
+        reg = <0x13fbf000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys: clock-controller@15020000 {
+        compatible = "mediatek,mt8192-imgsys";
+        reg = <0x15020000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys2: clock-controller@15820000 {
+        compatible = "mediatek,mt8192-imgsys2";
+        reg = <0x15820000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_soc: clock-controller@1600f000 {
+        compatible = "mediatek,mt8192-vdecsys_soc";
+        reg = <0x1600f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys: clock-controller@1602f000 {
+        compatible = "mediatek,mt8192-vdecsys";
+        reg = <0x1602f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys: clock-controller@17000000 {
+        compatible = "mediatek,mt8192-vencsys";
+        reg = <0x17000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys: clock-controller@1a000000 {
+        compatible = "mediatek,mt8192-camsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawa: clock-controller@1a04f000 {
+        compatible = "mediatek,mt8192-camsys_rawa";
+        reg = <0x1a04f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawb: clock-controller@1a06f000 {
+        compatible = "mediatek,mt8192-camsys_rawb";
+        reg = <0x1a06f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawc: clock-controller@1a08f000 {
+        compatible = "mediatek,mt8192-camsys_rawc";
+        reg = <0x1a08f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ipesys: clock-controller@1b000000 {
+        compatible = "mediatek,mt8192-ipesys";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mdpsys: clock-controller@1f000000 {
+        compatible = "mediatek,mt8192-mdpsys";
+        reg = <0x1f000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
new file mode 100644
index 0000000000..8d608fddf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8192
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system configuration
+  like reset and bus protection on MT8192.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8192-topckgen
+          - mediatek,mt8192-infracfg
+          - mediatek,mt8192-pericfg
+          - mediatek,mt8192-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8192-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    infracfg: syscon@10001000 {
+        compatible = "mediatek,mt8192-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    pericfg: syscon@10003000 {
+        compatible = "mediatek,mt8192-pericfg", "syscon";
+        reg = <0x10003000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apmixedsys: syscon@1000c000 {
+        compatible = "mediatek,mt8192-apmixedsys", "syscon";
+        reg = <0x1000c000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
new file mode 100644
index 0000000000..d17164b0b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
@@ -0,0 +1,238 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8195
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The clock architecture in Mediatek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices except apusys_pll provide clock gate control in different IP blocks.
+  The apusys_pll provides Plls which generated from SoC 26m for AI Processing Unit.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8195-scp_adsp
+          - mediatek,mt8195-imp_iic_wrap_s
+          - mediatek,mt8195-imp_iic_wrap_w
+          - mediatek,mt8195-mfgcfg
+          - mediatek,mt8195-wpesys
+          - mediatek,mt8195-wpesys_vpp0
+          - mediatek,mt8195-wpesys_vpp1
+          - mediatek,mt8195-imgsys
+          - mediatek,mt8195-imgsys1_dip_top
+          - mediatek,mt8195-imgsys1_dip_nr
+          - mediatek,mt8195-imgsys1_wpe
+          - mediatek,mt8195-ipesys
+          - mediatek,mt8195-camsys
+          - mediatek,mt8195-camsys_rawa
+          - mediatek,mt8195-camsys_yuva
+          - mediatek,mt8195-camsys_rawb
+          - mediatek,mt8195-camsys_yuvb
+          - mediatek,mt8195-camsys_mraw
+          - mediatek,mt8195-ccusys
+          - mediatek,mt8195-vdecsys_soc
+          - mediatek,mt8195-vdecsys
+          - mediatek,mt8195-vdecsys_core1
+          - mediatek,mt8195-vencsys
+          - mediatek,mt8195-vencsys_core1
+          - mediatek,mt8195-apusys_pll
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scp_adsp: clock-controller@10720000 {
+        compatible = "mediatek,mt8195-scp_adsp";
+        reg = <0x10720000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_s: clock-controller@11d03000 {
+        compatible = "mediatek,mt8195-imp_iic_wrap_s";
+        reg = <0x11d03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_w: clock-controller@11e05000 {
+        compatible = "mediatek,mt8195-imp_iic_wrap_w";
+        reg = <0x11e05000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mfgcfg: clock-controller@13fbf000 {
+        compatible = "mediatek,mt8195-mfgcfg";
+        reg = <0x13fbf000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys: clock-controller@14e00000 {
+        compatible = "mediatek,mt8195-wpesys";
+        reg = <0x14e00000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys_vpp0: clock-controller@14e02000 {
+        compatible = "mediatek,mt8195-wpesys_vpp0";
+        reg = <0x14e02000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys_vpp1: clock-controller@14e03000 {
+        compatible = "mediatek,mt8195-wpesys_vpp1";
+        reg = <0x14e03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys: clock-controller@15000000 {
+        compatible = "mediatek,mt8195-imgsys";
+        reg = <0x15000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_dip_top: clock-controller@15110000 {
+        compatible = "mediatek,mt8195-imgsys1_dip_top";
+        reg = <0x15110000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_dip_nr: clock-controller@15130000 {
+        compatible = "mediatek,mt8195-imgsys1_dip_nr";
+        reg = <0x15130000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_wpe: clock-controller@15220000 {
+        compatible = "mediatek,mt8195-imgsys1_wpe";
+        reg = <0x15220000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ipesys: clock-controller@15330000 {
+        compatible = "mediatek,mt8195-ipesys";
+        reg = <0x15330000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys: clock-controller@16000000 {
+        compatible = "mediatek,mt8195-camsys";
+        reg = <0x16000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawa: clock-controller@1604f000 {
+        compatible = "mediatek,mt8195-camsys_rawa";
+        reg = <0x1604f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_yuva: clock-controller@1606f000 {
+        compatible = "mediatek,mt8195-camsys_yuva";
+        reg = <0x1606f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawb: clock-controller@1608f000 {
+        compatible = "mediatek,mt8195-camsys_rawb";
+        reg = <0x1608f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_yuvb: clock-controller@160af000 {
+        compatible = "mediatek,mt8195-camsys_yuvb";
+        reg = <0x160af000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_mraw: clock-controller@16140000 {
+        compatible = "mediatek,mt8195-camsys_mraw";
+        reg = <0x16140000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ccusys: clock-controller@17200000 {
+        compatible = "mediatek,mt8195-ccusys";
+        reg = <0x17200000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_soc: clock-controller@1800f000 {
+        compatible = "mediatek,mt8195-vdecsys_soc";
+        reg = <0x1800f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys: clock-controller@1802f000 {
+        compatible = "mediatek,mt8195-vdecsys";
+        reg = <0x1802f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_core1: clock-controller@1803f000 {
+        compatible = "mediatek,mt8195-vdecsys_core1";
+        reg = <0x1803f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys: clock-controller@1a000000 {
+        compatible = "mediatek,mt8195-vencsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys_core1: clock-controller@1b000000 {
+        compatible = "mediatek,mt8195-vencsys_core1";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apusys_pll: clock-controller@190f3000 {
+        compatible = "mediatek,mt8195-apusys_pll";
+        reg = <0x190f3000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
new file mode 100644
index 0000000000..066c9b3d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8195
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The clock architecture in Mediatek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8195-topckgen
+          - mediatek,mt8195-infracfg_ao
+          - mediatek,mt8195-apmixedsys
+          - mediatek,mt8195-pericfg_ao
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8195-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    infracfg_ao: syscon@10001000 {
+        compatible = "mediatek,mt8195-infracfg_ao", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apmixedsys: syscon@1000c000 {
+        compatible = "mediatek,mt8195-apmixedsys", "syscon";
+        reg = <0x1000c000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    pericfg_ao: syscon@11003000 {
+        compatible = "mediatek,mt8195-pericfg_ao", "syscon";
+        reg = <0x11003000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
new file mode 100644
index 0000000000..d179a61536
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt
@@ -0,0 +1,25 @@
+MediaTek PCIESYS controller
+============================
+
+The MediaTek PCIESYS controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt7622-pciesys", "syscon"
+	- "mediatek,mt7629-pciesys", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The PCIESYS controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+pciesys: pciesys@1a100800 {
+	compatible = "mediatek,mt7622-pciesys", "syscon";
+	reg = <0 0x1a100800 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
new file mode 100644
index 0000000000..26158d0d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Peripheral Configuration Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  The Mediatek pericfg controller provides various clocks and reset outputs
+  to the system.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pericfg
+              - mediatek,mt2712-pericfg
+              - mediatek,mt6765-pericfg
+              - mediatek,mt6795-pericfg
+              - mediatek,mt7622-pericfg
+              - mediatek,mt7629-pericfg
+              - mediatek,mt8135-pericfg
+              - mediatek,mt8173-pericfg
+              - mediatek,mt8183-pericfg
+              - mediatek,mt8186-pericfg
+              - mediatek,mt8195-pericfg
+              - mediatek,mt8516-pericfg
+          - const: syscon
+      - items:
+          # Special case for mt7623 for backward compatibility
+          - const: mediatek,mt7623-pericfg
+          - const: mediatek,mt2701-pericfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pericfg@10003000 {
+        compatible = "mediatek,mt8173-pericfg", "syscon";
+        reg = <0x10003000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    pericfg@10003000 {
+        compatible =  "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon";
+        reg = <0x10003000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
new file mode 100644
index 0000000000..7cb02c9306
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt
@@ -0,0 +1,25 @@
+MediaTek SSUSBSYS controller
+============================
+
+The MediaTek SSUSBSYS controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt7622-ssusbsys", "syscon"
+	- "mediatek,mt7629-ssusbsys", "syscon"
+- #clock-cells: Must be 1
+- #reset-cells: Must be 1
+
+The SSUSBSYS controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+ssusbsys: ssusbsys@1a000000 {
+	compatible = "mediatek,mt7622-ssusbsys", "syscon";
+	reg = <0 0x1a000000 0 0x1000>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt
new file mode 100644
index 0000000000..f090147b7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt
@@ -0,0 +1,27 @@
+Mediatek vcodecsys controller
+============================
+
+The Mediatek vcodecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-vcodecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vcodecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+The vcodecsys controller also uses the common power domain from
+Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+The available power domains are defined in dt-bindings/power/mt*-power.h.
+
+Example:
+
+venc_gcon: clock-controller@17000000 {
+	compatible = "mediatek,mt6765-vcodecsys", "syscon";
+	reg = <0 0x17000000 0 0x10000>;
+	power-domains = <&scpsys MT6765_POWER_DOMAIN_VCODEC>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
new file mode 100644
index 0000000000..9819516917
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -0,0 +1,29 @@
+Mediatek vdecsys controller
+============================
+
+The Mediatek vdecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt2701-vdecsys", "syscon"
+	- "mediatek,mt2712-vdecsys", "syscon"
+	- "mediatek,mt6779-vdecsys", "syscon"
+	- "mediatek,mt6797-vdecsys", "syscon"
+	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
+	- "mediatek,mt8167-vdecsys", "syscon"
+	- "mediatek,mt8173-vdecsys", "syscon"
+	- "mediatek,mt8183-vdecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vdecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vdecsys: clock-controller@16000000 {
+	compatible = "mediatek,mt8173-vdecsys", "syscon";
+	reg = <0 0x16000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
new file mode 100644
index 0000000000..3cc299fd78
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
@@ -0,0 +1,22 @@
+Mediatek vencltsys controller
+============================
+
+The Mediatek vencltsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+	- "mediatek,mt8173-vencltsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencltsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencltsys: clock-controller@19000000 {
+	compatible = "mediatek,mt8173-vencltsys", "syscon";
+	reg = <0 0x19000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
new file mode 100644
index 0000000000..6a6a14e15c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
@@ -0,0 +1,26 @@
+Mediatek vencsys controller
+============================
+
+The Mediatek vencsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt2712-vencsys", "syscon"
+	- "mediatek,mt6779-vencsys", "syscon"
+	- "mediatek,mt6797-vencsys", "syscon"
+	- "mediatek,mt8173-vencsys", "syscon"
+	- "mediatek,mt8183-vencsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencsys: clock-controller@18000000 {
+	compatible = "mediatek,mt8173-vencsys", "syscon";
+	reg = <0 0x18000000 0 0x1000>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
new file mode 100644
index 0000000000..9a0d54e979
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Boards
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |+
+   The Microchip Sparx5 SoC is a ARMv8-based used in a family of
+   gigabit TSN-capable gigabit switches.
+
+   The SparX-5 Ethernet switch family provides a rich set of switching
+   features such as advanced TCAM-based VLAN and QoS processing
+   enabling delivery of differentiated services, and security through
+   TCAM-based frame processing using versatile content aware processor
+   (VCAP)
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: The Sparx5 pcb125 board is a modular board,
+          which has both spi-nor and eMMC storage. The modular design
+          allows for connection of different network ports.
+        items:
+          - const: microchip,sparx5-pcb125
+          - const: microchip,sparx5
+
+      - description: The Sparx5 pcb134 is a pizzabox form factor
+          gigabit switch with 20 SFP ports. It features spi-nor and
+          either spi-nand or eMMC storage (mount option).
+        items:
+          - const: microchip,sparx5-pcb134
+          - const: microchip,sparx5
+
+      - description: The Sparx5 pcb135 is a pizzabox form factor
+          gigabit switch with 48+4 Cu ports. It features spi-nor and
+          either spi-nand or eMMC storage (mount option).
+        items:
+          - const: microchip,sparx5-pcb135
+          - const: microchip,sparx5
+
+  axi@600000000:
+    type: object
+    description: the root node in the Sparx5 platforms must contain
+      an axi bus child node. They are always at physical address
+      0x600000000 in all the Sparx5 variants.
+    properties:
+      compatible:
+        items:
+          - const: simple-bus
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - axi@600000000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml
new file mode 100644
index 0000000000..4256528091
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/moxart.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/moxart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MOXA ART
+
+maintainers:
+  - Jonas Jensen <jonas.jensen@gmail.com>
+
+properties:
+  compatible:
+    description: UC-7112-LX embedded computer
+    items:
+      - const: moxa,moxart-uc-7112-lx
+      - const: moxa,moxart
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
new file mode 100644
index 0000000000..4c43eaf363
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mrvl/mrvl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Platforms
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: PXA168 Aspenite Board
+        items:
+          - enum:
+              - mrvl,pxa168-aspenite
+          - const: mrvl,pxa168
+      - description: PXA910 DKB Board
+        items:
+          - enum:
+              - mrvl,pxa910-dkb
+          - const: mrvl,pxa910
+      - description: MMP2 based boards
+        items:
+          - enum:
+              - mrvl,mmp2-brownstone
+              - olpc,xo-1.75
+          - const: mrvl,mmp2
+      - description: MMP3 based boards
+        items:
+          - enum:
+              - dell,wyse-ariel
+          - const: marvell,mmp3
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
new file mode 100644
index 0000000000..606b4b1b70
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
@@ -0,0 +1,84 @@
+QCOM Idle States for cpuidle driver
+
+ARM provides idle-state node to define the cpuidle states, as defined in [1].
+cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
+states. Idle states have different enter/exit latency and residency values.
+The idle states supported by the QCOM SoC are defined as -
+
+    * Standby
+    * Retention
+    * Standalone Power Collapse (Standalone PC or SPC)
+    * Power Collapse (PC)
+
+Standby: Standby does a little more in addition to architectural clock gating.
+When the WFI instruction is executed the ARM core would gate its internal
+clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
+trigger to execute the SPM state machine. The SPM state machine waits for the
+interrupt to trigger the core back in to active. This triggers the cache
+hierarchy to enter standby states, when all cpus are idle. An interrupt brings
+the SPM state machine out of its wait, the next step is to ensure that the
+cache hierarchy is also out of standby, and then the cpu is allowed to resume
+execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
+driver and is not defined in the DT. The SPM state machine should be
+configured to execute this state by default and after executing every other
+state below.
+
+Retention: Retention is a low power state where the core is clock gated and
+the memory and the registers associated with the core are retained. The
+voltage may be reduced to the minimum value needed to keep the processor
+registers active. The SPM should be configured to execute the retention
+sequence and would wait for interrupt, before restoring the cpu to execution
+state. Retention may have a slightly higher latency than Standby.
+
+Standalone PC: A cpu can power down and warmboot if there is a sufficient time
+between the time it enters idle and the next known wake up. SPC mode is used
+to indicate a core entering a power down state without consulting any other
+cpu or the system resources. This helps save power only on that core.  The SPM
+sequence for this idle state is programmed to power down the supply to the
+core, wait for the interrupt, restore power to the core, and ensure the
+system state including cache hierarchy is ready before allowing core to
+resume. Applying power and resetting the core causes the core to warmboot
+back into Elevation Level (EL) which trampolines the control back to the
+kernel. Entering a power down state for the cpu, needs to be done by trapping
+into a EL. Failing to do so, would result in a crash enforced by the warm boot
+code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
+be flushed in s/w, before powering down the core.
+
+Power Collapse: This state is similar to the SPC mode, but distinguishes
+itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
+modes. In a hierarchical power domain SoC, this means L2 and other caches can
+be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
+voltages reduced, provided all cpus enter this state.  Since the span of low
+power modes possible at this state is vast, the exit latency and the residency
+of this low power mode would be considered high even though at a cpu level,
+this essentially is cpu power down. The SPM in this state also may handshake
+with the Resource power manager (RPM) processor in the SoC to indicate a
+complete application processor subsystem shut down.
+
+The idle-state for QCOM SoCs are distinguished by the compatible property of
+the idle-states device node.
+
+The devicetree representation of the idle state should be -
+
+Required properties:
+
+- compatible: Must be one of -
+			"qcom,idle-state-ret",
+			"qcom,idle-state-spc",
+			"qcom,idle-state-pc",
+		and "arm,idle-state".
+
+Other required and optional properties are specified in [1].
+
+Example:
+
+	idle-states {
+		CPU_SPC: spc {
+			compatible = "qcom,idle-state-spc", "arm,idle-state";
+			entry-latency-us = <150>;
+			exit-latency-us = <200>;
+			min-residency-us = <2000>;
+		};
+	};
+
+[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
new file mode 100644
index 0000000000..c0e3c3a42b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -0,0 +1,58 @@
+SPM AVS Wrapper 2 (SAW2)
+
+The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+power-controller that transitions a piece of hardware (like a processor or
+subsystem) into and out of low power modes via a direct connection to
+the PMIC. It can also be wired up to interact with other processors in the
+system, notifying them when a low power state is entered or exited.
+
+Multiple revisions of the SAW hardware are supported using these Device Nodes.
+SAW2 revisions differ in the register offset and configuration data. Also, the
+same revision of the SAW in different SoCs may have different configuration
+data due the differences in hardware capabilities. Hence the SoC name, the
+version of the SAW hardware in that SoC and the distinction between cpu (big
+or Little) or cache, may be needed to uniquely identify the SAW register
+configuration and initialization data. The compatible string is used to
+indicate this parameter.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: Must have
+			"qcom,saw2"
+		    A more specific value could be one of:
+			"qcom,apq8064-saw2-v1.1-cpu"
+			"qcom,msm8226-saw2-v2.1-cpu"
+			"qcom,msm8974-saw2-v2.1-cpu"
+			"qcom,apq8084-saw2-v2.1-cpu"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+- regulator:
+	Usage: optional
+	Value type: boolean
+	Definition: Indicates that this SPM device acts as a regulator device
+			device for the core (CPU or Cache) the SPM is attached
+			to.
+
+Example 1:
+
+	power-controller@2099000 {
+		compatible = "qcom,saw2";
+		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+		regulator;
+	};
+
+Example 2:
+	saw0: power-controller@f9089000 {
+		compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
+		reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
new file mode 100644
index 0000000000..a8ac4a2d67
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,l3bridge.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 thingy.jp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mstar/mstar,l3bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/SigmaStar Armv7 SoC l3bridge
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  MStar/SigmaStar's Armv7 SoCs have a pipeline in the interface
+  between the CPU and memory. This means that before DMA capable
+  devices are allowed to run the pipeline must be flushed to ensure
+  everything is in memory.
+
+  The l3bridge region contains registers that allow such a flush
+  to be triggered.
+
+  This node is used by the platform code to find where the registers
+  are and install a barrier that triggers the required pipeline flush.
+
+properties:
+  compatible:
+    items:
+      - const: mstar,l3bridge
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    l3bridge: l3bridge@1f204400 {
+        compatible = "mstar,l3bridge";
+        reg = <0x1f204400 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
new file mode 100644
index 0000000000..5739848000
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 thingy.jp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/SigmaStar Armv7 SoC SMP control registers
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  MStar/SigmaStar's Armv7 SoCs that have more than one processor
+  have a region of registers that allow setting the boot address
+  and a magic number that allows secondary processors to leave
+  the loop they are parked in by the boot ROM.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sstar,ssd201-smpctrl # SSD201/SSD202D
+      - const: mstar,smpctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smpctrl@204000 {
+        compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
+        reg = <0x204000 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
new file mode 100644
index 0000000000..937059fcc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar platforms
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: infinity boards
+        items:
+          - enum:
+              - thingyjp,breadbee-crust # thingy.jp BreadBee Crust
+          - const: mstar,infinity
+
+      - description: infinity2m boards
+        items:
+          - enum:
+              - 100ask,dongshanpione # 100ask DongShanPiOne
+              - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
+              - m5stack,unitv2 # M5Stack UnitV2
+              - miyoo,miyoo-mini # Miyoo Mini
+              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
+              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
+          - const: mstar,infinity2m
+
+      - description: infinity3 boards
+        items:
+          - enum:
+              - thingyjp,breadbee # thingy.jp BreadBee
+          - const: mstar,infinity3
+
+      - description: mercury5 boards
+        items:
+          - enum:
+              - 70mai,midrived08 # 70mai midrive d08
+          - const: mstar,mercury5
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
new file mode 100644
index 0000000000..fb190db615
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,ma35d1.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,ma35d1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35 series SoC based platforms
+
+maintainers:
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  Boards with an ARMv8 based Nuvoton MA35 series SoC shall have
+  the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: MA35D1 based boards
+        items:
+          - enum:
+              - nuvoton,ma35d1-iot
+              - nuvoton,ma35d1-som
+          - const: nuvoton,ma35d1
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
new file mode 100644
index 0000000000..d386744c88
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuvoton,npcm.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nuvoton/nuvoton,npcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NPCM Platforms
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: WPCM450 based boards
+        items:
+          - enum:
+              - supermicro,x9sci-ln4f-bmc   # Supermicro X9SCI-LN4F server's BMC
+          - const: nuvoton,wpcm450
+
+      - description: NPCM750 based boards
+        items:
+          - enum:
+              - nuvoton,npcm750-evb         # NPCM750 evaluation board
+          - const: nuvoton,npcm750
+
+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
new file mode 100644
index 0000000000..84dc6b7512
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 CPU Complex
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  Tegra194 SOC has homogeneous architecture where each cluster has two
+  symmetric cores. Compatible string in "cpus" node represents the CPU
+  Complex having all clusters.
+
+properties:
+  $nodename:
+    const: cpus
+
+  compatible:
+    enum:
+      - nvidia,tegra194-ccplex
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the bpmp node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: true
+
+examples:
+  - |
+    cpus {
+      compatible = "nvidia,tegra194-ccplex";
+      nvidia,bpmp = <&bpmp>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cpu0_0: cpu@0 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x0>;
+        enable-method = "psci";
+      };
+
+      cpu0_1: cpu@1 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x001>;
+        enable-method = "psci";
+      };
+
+      cpu1_0: cpu@100 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x100>;
+        enable-method = "psci";
+      };
+
+      cpu1_1: cpu@101 {
+        compatible = "nvidia,tegra194-carmel";
+        device_type = "cpu";
+        reg = <0x101>;
+        enable-method = "psci";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
new file mode 100644
index 0000000000..f1bd6f50e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx Platforms
+
+maintainers:
+  - Roland Stigge <stigge@antcom.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,lpc3220
+          - nxp,lpc3230
+          - nxp,lpc3240
+      - items:
+          - enum:
+              - ea,ea3250
+              - phytec,phy3250
+          - const: nxp,lpc3250
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/arm/omap/counter.txt b/Documentation/devicetree/bindings/arm/omap/counter.txt
new file mode 100644
index 0000000000..5bd8aa0913
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/counter.txt
@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
new file mode 100644
index 0000000000..a43e4c7aba
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -0,0 +1,55 @@
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+		 crossbar. These interrupt lines are reserved in the soc,
+		 so crossbar bar driver should not consider them as free
+		 lines.
+
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+  SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+  crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
+Examples:
+		crossbar_mpu: crossbar@4a002a48 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <400>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+			ti,irqs-skip = <10 133 139 140>;
+		};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for
+further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+	interrupts = <GIC_SPI request_number interrupt_level>
+
+Example:
+	device_x@4a023000 {
+		/* Crossbar 8 used */
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
new file mode 100644
index 0000000000..0ce6665df4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt
@@ -0,0 +1,82 @@
+OMAP Control Module bindings
+
+Control Module contains miscellaneous features under it based on SoC type.
+Pincontrol is one common feature, and it has a specialized support
+described in [1]. Typically some clock nodes are also under control module.
+Syscon is used to share register level access to drivers external to
+control module driver itself.
+
+See [2] for documentation about clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
+[2] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-scm"
+		"ti,am4-scm"
+		"ti,dm814-scrm"
+		"ti,dm816-scrm"
+		"ti,omap2-scm"
+		"ti,omap3-scm"
+		"ti,omap4-scm-core"
+		"ti,omap4-scm-padconf-core"
+		"ti,omap4-scm-wkup"
+		"ti,omap4-scm-padconf-wkup"
+		"ti,omap5-scm-core"
+		"ti,omap5-scm-padconf-core"
+		"ti,omap5-scm-wkup-pad-conf"
+		"ti,dra7-scm-core"
+- reg:		Contains Control Module register address range
+		(base address and length)
+
+Optional properties:
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Examples:
+
+scm: scm@2000 {
+	compatible = "ti,omap3-scm", "simple-bus";
+	reg = <0x2000 0x2000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x2000 0x2000>;
+
+	omap3_pmx_core: pinmux@30 {
+		compatible = "ti,omap3-padconf",
+			     "pinctrl-single";
+		reg = <0x30 0x230>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		pinctrl-single,register-width = <16>;
+		pinctrl-single,function-mask = <0xff1f>;
+	};
+
+	scm_conf: scm_conf@270 {
+		compatible = "syscon";
+		reg = <0x270 0x330>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scm_clocks: clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	scm_clockdomains: clockdomains {
+	};
+}
+
+&scm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/dmm.txt b/Documentation/devicetree/bindings/arm/omap/dmm.txt
new file mode 100644
index 0000000000..8bd6d0a238
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dmm.txt
@@ -0,0 +1,22 @@
+OMAP Dynamic Memory Manager (DMM) bindings
+
+The dynamic memory manager (DMM) is a module located immediately in front of the
+SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
+accesses such as priority generation amongst initiators, configuration of SDRAM
+interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
+translation for initiators which need contiguous dma bus addresses.
+
+Required properties:
+- compatible:	Should contain "ti,omap4-dmm" for OMAP4 family
+		Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
+- reg:		Contains DMM register address range (base address and length)
+- interrupts:	Should contain an interrupt-specifier for DMM_IRQ.
+- ti,hwmods:	Name of the hwmod associated to DMM, which is typically "dmm"
+
+Example:
+
+dmm@4e000000 {
+	compatible = "ti,omap4-dmm";
+	reg = <0x4e000000 0x800>;
+	ti,hwmods = "dmm";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt
new file mode 100644
index 0000000000..d3830a32ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt
new file mode 100644
index 0000000000..6d62951713
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
new file mode 100644
index 0000000000..161448da95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,23 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+               Should be "ti,omap4-l3-noc" for OMAP4 family
+               Should be "ti,omap5-l3-noc" for OMAP5 family
+	       Should be "ti,dra7-l3-noc" for DRA7 family
+               Should be "ti,am4372-l3-noc" for AM43 family
+- reg:	Contains L3 register address range for each noc domain.
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+	compatible = "ti,omap4-l3-noc", "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt
new file mode 100644
index 0000000000..6816adcdc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -0,0 +1,37 @@
+L4 interconnect bindings
+
+These bindings describe the OMAP SoCs L4 interconnect bus.
+
+Required properties:
+- compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
+	       Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
+	       Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
+	       Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
+	       Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus
+	       Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
+	       Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
+	       Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
+	       Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
+	       Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
+	       Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
+	       Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
+- ranges : contains the IO map range for the bus
+- reg : registers link agent and interconnect agent and access protection
+- reg-names : "la" for link agent, "ia0" to "ia3" for one to three
+              interconnect agent instances, "ap" for access if it exists
+
+Examples:
+
+l4: interconnect@48000000 {
+	compatible "ti,omap4-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x48000000 0x100000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
new file mode 100644
index 0000000000..e41490e697
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -0,0 +1,54 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
+- ti,hwmods: "mpu"
+
+Optional properties:
+- sram:	Phandle to the ocmcram node
+
+am335x and am437x only:
+- pm-sram: Phandles to ocmcram nodes to be used for power management.
+	   First should be type 'protect-exec' for the driver to use to copy
+	   and run PM functions, second should be regular pool to be used for
+	   data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
+	   for more details.
+
+Examples:
+
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};
+
+- For an AM335x system:
+
+mpu {
+	compatible = "ti,omap3-mpu";
+	ti,hwmods = "mpu";
+	pm-sram = <&pm_sram_code
+		   &pm_sram_data>;
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644
index 0000000000..c863ec07cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,126 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+address range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+  form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+  HW documentation, attached to a device. Must contain at least
+  one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+  during suspend.
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
+- ti,no-idle: When present, the module is never allowed to idle.
+
+Example:
+
+spinlock@1 {
+    compatible = "ti,omap4-spinlock";
+    ti,hwmods = "spinlock";
+};
+
+SoC Type (optional):
+
+- General Purpose devices
+  compatible = "ti,gp"
+- High Security devices
+  compatible = "ti,hs"
+
+SoC Families:
+
+- DRA7 generic - defaults to DRA742
+  compatible = "ti,dra7"
+- AM33x generic
+  compatible = "ti,am33xx"
+- AM43x generic - defaults to AM4372
+  compatible = "ti,am43"
+
+SoCs:
+
+- DRA762
+  compatible = "ti,dra762", "ti,dra7"
+
+- DRA742
+  compatible = "ti,dra742", "ti,dra74", "ti,dra7"
+
+- DRA722
+  compatible = "ti,dra722", "ti,dra72", "ti,dra7"
+
+- DRA718
+  compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM5748
+  compatible = "ti,am5748", "ti,dra762", "ti,dra7"
+
+- AM5728
+  compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5726
+  compatible = "ti,am5726", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5718
+  compatible = "ti,am5718", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM5716
+  compatible = "ti,am5716", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM4372
+  compatible = "ti,am4372", "ti,am43"
+
+Boards (incomplete list of examples):
+
+
+- AM437x CM-T43
+  compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
+- AM437x SBC-T43
+  compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
+- AM43x EPOS EVM
+  compatible = "ti,am43x-epos-evm", "ti,am43", "ti,am438x"
+
+- AM437x GP EVM
+  compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+  compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
+- AM57XX CL-SOM-AM57x
+  compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM57XX SBC-AM57x
+  compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5748 IDK
+  compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
+
+- AM5728 IDK
+  compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5718 IDK
+  compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"
+
+- DRA762 EVM:  Software Development Board for DRA762
+  compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"
+
+- DRA742 EVM:  Software Development Board for DRA742
+  compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- DRA722 EVM: Software Development Board for DRA722
+  compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- DRA718 EVM: Software Development Board for DRA718
+  compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
new file mode 100644
index 0000000000..431ef8c56a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -0,0 +1,68 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-prcm"
+		"ti,am4-prcm"
+		"ti,omap2-prcm"
+		"ti,omap3-prm"
+		"ti,omap3-cm"
+		"ti,omap4-cm1"
+		"ti,omap4-prm"
+		"ti,omap4-cm2"
+		"ti,omap4-scrm"
+		"ti,omap5-prm"
+		"ti,omap5-cm-core-aon"
+		"ti,omap5-scrm"
+		"ti,omap5-cm-core"
+		"ti,dra7-prm"
+		"ti,dra7-cm-core-aon"
+		"ti,dra7-cm-core"
+		"ti,dm814-prcm"
+		"ti,dm816-prcm"
+- reg:		Contains PRCM module register address range
+		(base address and length)
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+- #clock-cells: From common clock binding
+- clock-output-names: From common clock binding
+
+
+Example:
+
+cm: clock@48004000 {
+	compatible = "ti,omap3-cm";
+	reg = <0x48004000 0x4000>;
+	#clock-cells = <0>;
+	clock-output-names = "cm";
+
+	cm_clocks: clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	cm_clockdomains: clockdomains {
+	};
+}
+
+&cm_clocks {
+	omap2_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/prm-inst.txt b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
new file mode 100644
index 0000000000..42db138e09
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prm-inst.txt
@@ -0,0 +1,31 @@
+OMAP PRM instance bindings
+
+Power and Reset Manager is an IP block on OMAP family of devices which
+handle the power domains and their current state, and provide reset
+handling for the domains and/or separate IP blocks under the power domain
+hierarchy.
+
+Required properties:
+- compatible:	Must contain one of the following:
+		"ti,am3-prm-inst"
+		"ti,am4-prm-inst"
+		"ti,omap4-prm-inst"
+		"ti,omap5-prm-inst"
+		"ti,dra7-prm-inst"
+		and additionally must contain:
+		"ti,omap-prm-inst"
+- reg:		Contains PRM instance register address range
+		(base address and length)
+
+Optional properties:
+- #power-domain-cells:	Should be 0 if the instance is a power domain provider.
+- #reset-cells:	Should be 1 if the PRM instance in question supports resets.
+
+Example:
+
+prm_dsp2: prm@1b00 {
+	compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+	reg = <0x1b00 0x40>;
+	#power-domain-cells = <0>;
+	#reset-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
new file mode 100644
index 0000000000..99b5e95307
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Performance Monitor Units
+
+maintainers:
+  - Mark Rutland <mark.rutland@arm.com>
+  - Will Deacon <will.deacon@arm.com>
+
+description: |+
+  ARM cores often have a PMU for counting cpu and cache events like cache misses
+  and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+  representation in the device tree should be done as under:-
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apm,potenza-pmu
+          - apple,avalanche-pmu
+          - apple,blizzard-pmu
+          - apple,firestorm-pmu
+          - apple,icestorm-pmu
+          - arm,armv8-pmuv3 # Only for s/w models
+          - arm,arm1136-pmu
+          - arm,arm1176-pmu
+          - arm,arm11mpcore-pmu
+          - arm,cortex-a5-pmu
+          - arm,cortex-a7-pmu
+          - arm,cortex-a8-pmu
+          - arm,cortex-a9-pmu
+          - arm,cortex-a12-pmu
+          - arm,cortex-a15-pmu
+          - arm,cortex-a17-pmu
+          - arm,cortex-a32-pmu
+          - arm,cortex-a34-pmu
+          - arm,cortex-a35-pmu
+          - arm,cortex-a53-pmu
+          - arm,cortex-a55-pmu
+          - arm,cortex-a57-pmu
+          - arm,cortex-a65-pmu
+          - arm,cortex-a72-pmu
+          - arm,cortex-a73-pmu
+          - arm,cortex-a75-pmu
+          - arm,cortex-a76-pmu
+          - arm,cortex-a77-pmu
+          - arm,cortex-a78-pmu
+          - arm,cortex-a510-pmu
+          - arm,cortex-a520-pmu
+          - arm,cortex-a710-pmu
+          - arm,cortex-a715-pmu
+          - arm,cortex-a720-pmu
+          - arm,cortex-x1-pmu
+          - arm,cortex-x2-pmu
+          - arm,cortex-x3-pmu
+          - arm,cortex-x4-pmu
+          - arm,neoverse-e1-pmu
+          - arm,neoverse-n1-pmu
+          - arm,neoverse-n2-pmu
+          - arm,neoverse-v1-pmu
+          - brcm,vulcan-pmu
+          - cavium,thunder-pmu
+          - nvidia,denver-pmu
+          - nvidia,carmel-pmu
+          - qcom,krait-pmu
+          - qcom,scorpion-pmu
+          - qcom,scorpion-mp-pmu
+
+  interrupts:
+    # Don't know how many CPUs, so no constraints to specify
+    description: 1 per-cpu interrupt (PPI) or 1 interrupt per core.
+
+  interrupt-affinity:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      When using SPIs, specifies a list of phandles to CPU
+      nodes corresponding directly to the affinity of
+      the SPIs listed in the interrupts property.
+
+      When using a PPI, specifies a list of phandles to CPU
+      nodes corresponding to the set of CPUs which have
+      a PMU of this type signalling the PPI listed in the
+      interrupts property, unless this is already specified
+      by the PPI interrupt specifier itself (in which case
+      the interrupt-affinity property shouldn't be present).
+
+      This property should be present when there is more than
+      a single SPI.
+
+  qcom,no-pc-write:
+    type: boolean
+    description:
+      Indicates that this PMU doesn't support the 0xc and 0xd events.
+
+  secure-reg-access:
+    type: boolean
+    description:
+      Indicates that the ARMv7 Secure Debug Enable Register
+      (SDER) is accessible. This will cause the driver to do
+      any setup required that is only possible in ARMv7 secure
+      state. If not present the ARMv7 SDER will not be touched,
+      which means the PMU may fail to operate unless external
+      code (bootloader or security monitor) has performed the
+      appropriate initialisation. Note that this property is
+      not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux
+      in Non-secure state.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/arm/primecell.yaml b/Documentation/devicetree/bindings/arm/primecell.yaml
new file mode 100644
index 0000000000..e15fe00aaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/primecell.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/primecell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Primecell Peripherals
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  ARM, Ltd. Primecell peripherals have a standard id register that can be used to
+  identify the peripheral type, vendor, and revision. This value can be used for
+  driver matching.
+
+properties:
+  compatible:
+    contains:
+      const: arm,primecell
+    description:
+      Should be a specific name for the peripheral followed by "arm,primecell".
+      The specific name will match the ARM engineering name for the logic block
+      in the form "arm,pl???"
+
+  arm,primecell-periphid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Value to override the h/w ID value
+  clocks:
+    minItems: 1
+    maxItems: 32
+  clock-names:
+    contains:
+      const: apb_pclk
+    additionalItems: true
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
new file mode 100644
index 0000000000..0c5381e081
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/psci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power State Coordination Interface (PSCI)
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: |+
+  Firmware implementing the PSCI functions described in ARM document number
+  ARM DEN 0022A ("Power State Coordination Interface System Software on ARM
+  processors") can be used by Linux to initiate various CPU-centric power
+  operations.
+
+  Issue A of the specification describes functions for CPU suspend, hotplug
+  and migration of secure software.
+
+  Functions are invoked by trapping to the privilege level of the PSCI
+  firmware (specified as part of the binding below) and passing arguments
+  in a manner similar to that specified by AAPCS:
+
+     r0       => 32-bit Function ID / return value
+    {r1 - r3}	=> Parameters
+
+  Note that the immediate field of the trapping instruction must be set
+  to #0.
+
+  [2] Power State Coordination Interface (PSCI) specification
+    http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
+
+properties:
+  $nodename:
+    const: psci
+
+  compatible:
+    oneOf:
+      - description:
+          For implementations complying to PSCI versions prior to 0.2.
+        const: arm,psci
+
+      - description:
+          For implementations complying to PSCI 0.2.
+          Function IDs are not required and should be ignored by an OS with
+          PSCI 0.2 support, but are permitted to be present for compatibility
+          with existing software when "arm,psci" is later in the compatible
+          list.
+        minItems: 1
+        items:
+          - const: arm,psci-0.2
+          - const: arm,psci
+
+      - description:
+          For implementations complying to PSCI 1.0.
+          PSCI 1.0 is backward compatible with PSCI 0.2 with minor
+          specification updates, as defined in the PSCI specification[2].
+        minItems: 1
+        items:
+          - const: arm,psci-1.0
+          - const: arm,psci-0.2
+          - const: arm,psci
+
+  method:
+    description: The method of calling the PSCI firmware.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      # HVC #0, with the register assignments specified in this binding.
+      - hvc
+
+  cpu_suspend:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Function ID for CPU_SUSPEND operation
+
+  cpu_off:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Function ID for CPU_OFF operation
+
+  cpu_on:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Function ID for CPU_ON operation
+
+  migrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Function ID for MIGRATE operation
+
+  arm,psci-suspend-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      power_state parameter to pass to the PSCI suspend call.
+
+      Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie
+      idle state nodes with entry-method property is set to "psci", as per
+      bindings in [1]) must specify this property.
+
+      [1] Kernel documentation - ARM idle states bindings
+        Documentation/devicetree/bindings/cpu/idle-states.yaml
+
+patternProperties:
+  "^power-domain-":
+    $ref: /schemas/power/power-domain.yaml#
+
+    type: object
+    description: |
+      ARM systems can have multiple cores, sometimes in an hierarchical
+      arrangement. This often, but not always, maps directly to the processor
+      power topology of the system. Individual nodes in a topology have their
+      own specific power states and can be better represented hierarchically.
+
+      For these cases, the definitions of the idle states for the CPUs and the
+      CPU topology, must conform to the binding in [3]. The idle states
+      themselves must conform to the binding in [4] and must specify the
+      arm,psci-suspend-param property.
+
+      It should also be noted that, in PSCI firmware v1.0 the OS-Initiated
+      (OSI) CPU suspend mode is introduced. Using a hierarchical representation
+      helps to implement support for OSI mode and OS implementations may choose
+      to mandate it.
+
+      [3] Documentation/devicetree/bindings/power/power-domain.yaml
+      [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml
+
+required:
+  - compatible
+  - method
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,psci
+    then:
+      required:
+        - cpu_off
+        - cpu_on
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    // Case 1: PSCI v0.1 only.
+
+    psci {
+      compatible      = "arm,psci";
+      method          = "smc";
+      cpu_suspend     = <0x95c10000>;
+      cpu_off         = <0x95c10001>;
+      cpu_on          = <0x95c10002>;
+      migrate         = <0x95c10003>;
+    };
+
+  - |+
+
+    // Case 2: PSCI v0.2 only
+
+    psci {
+      compatible      = "arm,psci-0.2";
+      method          = "smc";
+    };
+
+
+  - |+
+
+    // Case 3: PSCI v0.2 and PSCI v0.1.
+
+    /*
+     * A DTB may provide IDs for use by kernels without PSCI 0.2 support,
+     * enabling firmware and hypervisors to support existing and new kernels.
+     * These IDs will be ignored by kernels with PSCI 0.2 support, which will
+     * use the standard PSCI 0.2 IDs exclusively.
+     */
+
+    psci {
+      compatible = "arm,psci-0.2", "arm,psci";
+      method = "hvc";
+
+      cpu_on = <0x95c10002>;
+      cpu_off = <0x95c10001>;
+    };
+
+  - |+
+
+    // Case 4: CPUs and CPU idle states described using the hierarchical model.
+
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a53";
+        reg = <0x0>;
+        enable-method = "psci";
+        power-domains = <&CPU_PD0>;
+        power-domain-names = "psci";
+      };
+
+      CPU1: cpu@1 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a53";
+        reg = <0x100>;
+        enable-method = "psci";
+        power-domains = <&CPU_PD1>;
+        power-domain-names = "psci";
+      };
+
+      idle-states {
+
+        CPU_PWRDN: cpu-power-down {
+          compatible = "arm,idle-state";
+          arm,psci-suspend-param = <0x0000001>;
+          entry-latency-us = <10>;
+          exit-latency-us = <10>;
+          min-residency-us = <100>;
+        };
+      };
+
+      domain-idle-states {
+
+        CLUSTER_RET: cluster-retention {
+          compatible = "domain-idle-state";
+          arm,psci-suspend-param = <0x1000011>;
+          entry-latency-us = <500>;
+          exit-latency-us = <500>;
+          min-residency-us = <2000>;
+        };
+
+        CLUSTER_PWRDN: cluster-power-down {
+          compatible = "domain-idle-state";
+          arm,psci-suspend-param = <0x1000031>;
+          entry-latency-us = <2000>;
+          exit-latency-us = <2000>;
+          min-residency-us = <6000>;
+        };
+      };
+    };
+
+    psci {
+      compatible = "arm,psci-1.0";
+      method = "smc";
+
+      CPU_PD0: power-domain-cpu0 {
+        #power-domain-cells = <0>;
+        domain-idle-states = <&CPU_PWRDN>;
+        power-domains = <&CLUSTER_PD>;
+      };
+
+      CPU_PD1: power-domain-cpu1 {
+        #power-domain-cells = <0>;
+        domain-idle-states =  <&CPU_PWRDN>;
+        power-domains = <&CLUSTER_PD>;
+      };
+
+      CLUSTER_PD: power-domain-cluster {
+        #power-domain-cells = <0>;
+        domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
new file mode 100644
index 0000000000..ea3c5db6b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Aggregator - TPDA
+
+description: |
+  TPDAs are responsible for packetization and timestamping of data sets
+  utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or
+  more attached TPDM and pushing the resultant (packetized) data out a
+  master ATB interface. Performing an arbitrated ATB interleaving (funneling)
+  task for free-flowing data from TPDM (i.e. CMB and DSB data set flows).
+
+  There is no strict binding between TPDM and TPDA. TPDA can have multiple
+  TPDMs connect to it. But There must be only one TPDA in the path from the
+  TPDM source to TMC sink. TPDM can directly connect to TPDA's inport or
+  connect to funnel which will connect to TPDA's inport.
+
+  We can use the commands are similar to the below to validate TPDMs.
+  Enable coresight sink first.
+
+  echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
+  echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
+  echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
+  echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
+
+  The test data will be collected in the coresight sink which is enabled.
+  If rwp register of the sink is keeping updating when do integration_test
+  (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM
+  to sink.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpda
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpda(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpda
+      - const: arm,primecell
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  in-ports:
+    type: object
+    description: |
+      Input connections from TPDM to TPDA
+    $ref: /schemas/graph.yaml#/properties/ports
+
+  out-ports:
+    type: object
+    description: |
+      Output connections from the TPDA to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description:
+          Output connection from the TPDA to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # minimum tpda definition.
+  - |
+    tpda@6004000 {
+       compatible = "qcom,coresight-tpda", "arm,primecell";
+       reg = <0x6004000 0x1000>;
+
+       clocks = <&aoss_qmp>;
+       clock-names = "apb_pclk";
+
+       in-ports {
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          tpda_qdss_0_in_tpdm_dcc: endpoint {
+            remote-endpoint =
+              <&tpdm_dcc_out_tpda_qdss_0>;
+            };
+        };
+      };
+
+       out-ports {
+         port {
+                 tpda_qdss_out_funnel_in0: endpoint {
+                    remote-endpoint =
+                    <&funnel_in0_in_tpda_qdss>;
+                  };
+          };
+       };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
new file mode 100644
index 0000000000..3bad47b7b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Monitor - TPDM
+
+description: |
+  The TPDM or Monitor serves as data collection component for various dataset
+  types specified in the QPMDA spec. It covers Implementation defined ((ImplDef),
+  Basic Counts (BC), Tenure Counts (TC), Continuous Multi-Bit (CMB), and Discrete
+  Single Bit (DSB). It performs data collection in the data producing clock
+  domain and transfers it to the data collection time domain, generally ATB
+  clock domain.
+
+  The primary use case of the TPDM is to collect data from different data
+  sources and send it to a TPDA for packetization, timestamping, and funneling.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpdm
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpdm(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpdm
+      - const: arm,primecell
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  out-ports:
+    description: |
+      Output connections from the TPDM to coresight funnel/TPDA.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the TPDM to coresight
+            funnel/TPDA.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # minimum TPDM definition. TPDM connect to coresight TPDA.
+  - |
+    tpdm@684c000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x0684c000 0x1000>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_prng_out_tpda_qdss: endpoint {
+            remote-endpoint =
+              <&tpda_qdss_in_tpdm_prng>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
new file mode 100644
index 0000000000..97621c92a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC compatibles naming convention
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    qcom,SoC-IP
+
+  For example::
+   qcom,sdm845-llcc-bwmon
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # Preferred naming style for compatibles of SoC components:
+      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$"
+      - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
+
+      # Legacy namings - variations of existing patterns/compatibles are OK,
+      # but do not add completely new entries to these:
+      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,gpucc-sdm630
+          - qcom,gpucc-sdm660
+          - qcom,lcc-apq8064
+          - qcom,lcc-ipq8064
+          - qcom,lcc-mdm9615
+          - qcom,lcc-msm8960
+          - qcom,lpass-cpu-apq8016
+          - qcom,usb-ss-ipq4019-phy
+          - qcom,usb-hs-ipq4019-phy
+          - qcom,vqmmc-ipq4019-regulator
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - qcom,ipq806x-gmac
+          - qcom,ipq806x-nand
+          - qcom,ipq806x-sata-phy
+          - qcom,ipq806x-usb-phy-ss
+          - qcom,ipq806x-usb-phy-hs
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
new file mode 100644
index 0000000000..90f31beb80
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -0,0 +1,1125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Some qcom based bootloaders identify the dtb blob based on a set of
+  device properties like SoC and platform and revisions of those components.
+  To support this scheme, we encode this information into the board compatible
+  string.
+
+  Each board must specify a top-level board compatible string with the following
+  format:
+
+  	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
+
+  The 'SoC' and 'board' elements are required. All other elements are optional.
+
+  The 'SoC' element must be one of the following strings:
+
+        apq8016
+        apq8026
+        apq8074
+        apq8084
+        apq8096
+        ipq4018
+        ipq5018
+        ipq5332
+        ipq6018
+        ipq8074
+        ipq9574
+        mdm9615
+        msm8226
+        msm8916
+        msm8939
+        msm8953
+        msm8956
+        msm8960
+        msm8974
+        msm8976
+        msm8992
+        msm8994
+        msm8996
+        msm8998
+        qcs404
+        qcm2290
+        qdu1000
+        qrb2210
+        qrb4210
+        qru1000
+        sa8155p
+        sa8540p
+        sa8775p
+        sc7180
+        sc7280
+        sc8180x
+        sc8280xp
+        sda660
+        sdm450
+        sdm630
+        sdm632
+        sdm636
+        sdm660
+        sdm670
+        sdm845
+        sdx55
+        sdx65
+        sdx75
+        sm4250
+        sm4450
+        sm6115
+        sm6115p
+        sm6125
+        sm6350
+        sm6375
+        sm7225
+        sm8150
+        sm8250
+        sm8350
+        sm8450
+        sm8550
+
+  The 'board' element must be one of the following strings:
+
+        adp
+        ap-al02-c2
+        ap-al02-c6
+        ap-al02-c7
+        ap-al02-c8
+        ap-al02-c9
+        ap-mi01.2
+        ap-mi01.3
+        ap-mi01.6
+        ap-mi01.9
+        cdp
+        cp01-c1
+        dragonboard
+        hk01
+        hk10-c1
+        hk10-c2
+        idp
+        liquid
+        rdp432-c2
+        mtp
+        qrd
+        rb2
+        ride
+        sbc
+        x100
+
+  The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
+  where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
+  as v1. If all versions of the 'board_version' elements match, then a
+  wildcard '*' should be used, e.g. 'v*'.
+
+  The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
+
+  Examples:
+
+  	"qcom,msm8916-v1-cdp-pm8916-v2.1"
+
+  A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
+  2.1.
+
+  	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
+
+  A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
+  foundry 2.
+
+  There are many devices in the list below that run the standard ChromeOS
+  bootloader setup and use the open source depthcharge bootloader to boot the
+  OS. These devices do not use the scheme described above. For details, see:
+  https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,apq8016-sbc
+          - const: qcom,apq8016
+
+      - items:
+          - enum:
+              - asus,sparrow
+              - huawei,sturgeon
+              - lg,lenok
+              - samsung,matisse-wifi
+          - const: qcom,apq8026
+
+      - items:
+          - enum:
+              - asus,nexus7-flo
+              - lg,nexus4-mako
+              - sony,xperia-yuga
+              - qcom,apq8064-cm-qs600
+              - qcom,apq8064-ifc6410
+          - const: qcom,apq8064
+
+      - items:
+          - enum:
+              - qcom,apq8074-dragonboard
+          - const: qcom,apq8074
+
+      - items:
+          - enum:
+              - qcom,apq8060-dragonboard
+              - qcom,msm8660-surf
+          - const: qcom,msm8660
+
+      - items:
+          - enum:
+              - qcom,apq8084-mtp
+              - qcom,apq8084-sbc
+          - const: qcom,apq8084
+
+      - items:
+          - enum:
+              - samsung,s3ve3g
+          - const: qcom,msm8226
+
+      - items:
+          - enum:
+              - samsung,a7
+              - sony,kanuti-tulip
+              - square,apq8039-t2
+          - const: qcom,msm8939
+
+      - items:
+          - enum:
+              - sony,kugo-row
+              - sony,suzu-row
+          - const: qcom,msm8956
+
+      - items:
+          - enum:
+              - qcom,msm8960-cdp
+              - samsung,expressatt
+          - const: qcom,msm8960
+
+      - items:
+          - enum:
+              - lge,hammerhead
+              - sony,xperia-amami
+              - sony,xperia-honami
+          - const: qcom,msm8974
+
+      - items:
+          - enum:
+              - fairphone,fp2
+              - oneplus,bacon
+              - samsung,klte
+              - sony,xperia-castor
+          - const: qcom,msm8974pro
+          - const: qcom,msm8974
+
+      - items:
+          - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
+          - const: qcom,msm8916
+
+      - items:
+          - enum:
+              - acer,a1-724
+              - alcatel,idol347
+              - asus,z00l
+              - gplus,fl8005a
+              - huawei,g7
+              - longcheer,l8910
+              - samsung,a3u-eur
+              - samsung,a5u-eur
+              - samsung,e5
+              - samsung,e7
+              - samsung,grandmax
+              - samsung,gt510
+              - samsung,gt58
+              - samsung,j5
+              - samsung,j5x
+              - samsung,serranove
+              - thwc,uf896
+              - thwc,ufi001c
+              - wingtech,wt88047
+              - yiming,uz801-v3
+          - const: qcom,msm8916
+
+      - items:
+          - const: longcheer,l8150
+          - const: qcom,msm8916-v1-qrd/9-v1
+          - const: qcom,msm8916
+
+      - items:
+          - enum:
+              - motorola,potter
+              - xiaomi,daisy
+              - xiaomi,mido
+              - xiaomi,tissot
+              - xiaomi,vince
+          - const: qcom,msm8953
+
+      - items:
+          - enum:
+              - lg,bullhead
+              - microsoft,talkman
+              - xiaomi,libra
+          - const: qcom,msm8992
+
+      - items:
+          - enum:
+              - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
+              - huawei,angler
+              - microsoft,cityman
+              - sony,ivy-row
+              - sony,karin-row
+              - sony,satsuki-row
+              - sony,sumire-row
+              - sony,suzuran-row
+          - const: qcom,msm8994
+
+      - items:
+          - enum:
+              - arrow,apq8096-db820c
+              - inforce,ifc6640
+          - const: qcom,apq8096-sbc
+          - const: qcom,apq8096
+
+      - items:
+          - enum:
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
+              - qcom,msm8996-mtp
+              - sony,dora-row
+              - sony,kagura-row
+              - sony,keyaki-row
+              - xiaomi,gemini
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - xiaomi,natrium
+              - xiaomi,scorpio
+          - const: qcom,msm8996pro
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - asus,novago-tp370ql
+              - fxtec,pro1
+              - hp,envy-x2
+              - lenovo,miix-630
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - qcom,msm8998-mtp
+              - sony,xperia-lilac
+              - sony,xperia-maple
+              - sony,xperia-poplar
+              - xiaomi,sagit
+          - const: qcom,msm8998
+
+      - items:
+          - enum:
+              - 8dev,jalapeno
+              - alfa-network,ap120c-ac
+          - const: qcom,ipq4018
+
+      - items:
+          - enum:
+              - qcom,ipq4019-ap-dk01.1-c1
+              - qcom,ipq4019-ap-dk04.1-c3
+              - qcom,ipq4019-ap-dk07.1-c1
+              - qcom,ipq4019-ap-dk07.1-c2
+              - qcom,ipq4019-dk04.1-c1
+          - const: qcom,ipq4019
+
+      - items:
+          - enum:
+              - qcom,ipq5018-rdp432-c2
+          - const: qcom,ipq5018
+
+      - items:
+          - enum:
+              - qcom,ipq5332-ap-mi01.2
+              - qcom,ipq5332-ap-mi01.3
+              - qcom,ipq5332-ap-mi01.6
+              - qcom,ipq5332-ap-mi01.9
+          - const: qcom,ipq5332
+
+      - items:
+          - enum:
+              - mikrotik,rb3011
+              - qcom,ipq8064-ap148
+          - const: qcom,ipq8064
+
+      - items:
+          - enum:
+              - qcom,ipq8074-hk01
+              - qcom,ipq8074-hk10-c1
+              - qcom,ipq8074-hk10-c2
+          - const: qcom,ipq8074
+
+      - items:
+          - enum:
+              - qcom,ipq9574-ap-al02-c2
+              - qcom,ipq9574-ap-al02-c6
+              - qcom,ipq9574-ap-al02-c7
+              - qcom,ipq9574-ap-al02-c8
+              - qcom,ipq9574-ap-al02-c9
+          - const: qcom,ipq9574
+
+      - description: Sierra Wireless MangOH Green with WP8548 Module
+        items:
+          - const: swir,mangoh-green-wp8548
+          - const: swir,wp8548
+          - const: qcom,mdm9615
+
+      - description: Qualcomm Technologies, Inc. Robotics RB1
+        items:
+          - enum:
+              - qcom,qrb2210-rb1
+          - const: qcom,qrb2210
+          - const: qcom,qcm2290
+
+      - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qdu1000-idp
+              - qcom,qdu1000-x100
+          - const: qcom,qdu1000
+
+      - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qru1000-idp
+          - const: qcom,qru1000
+
+      - items:
+          - enum:
+              - acer,aspire1
+              - qcom,sc7180-idp
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (rev1 - 2)
+        items:
+          - const: google,coachz-rev1
+          - const: google,coachz-rev2
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (newest rev)
+        items:
+          - const: google,coachz
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (rev1 - 2)
+        items:
+          - const: google,coachz-rev1-sku0
+          - const: google,coachz-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (newest rev)
+        items:
+          - const: google,coachz-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev2)
+        items:
+          - const: google,homestar-rev2
+          - const: google,homestar-rev23
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev3)
+        items:
+          - const: google,homestar-rev3
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (newest rev)
+        items:
+          - const: google,homestar
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (rev0)
+        items:
+          - const: google,kingoftown-rev0
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (newest rev)
+        items:
+          - const: google,kingoftown
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev0)
+        items:
+          - const: google,lazor-rev0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev1 - 2)
+        items:
+          - const: google,lazor-rev1
+          - const: google,lazor-rev2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev3 - 8)
+        items:
+          - const: google,lazor-rev3
+          - const: google,lazor-rev4
+          - const: google,lazor-rev5
+          - const: google,lazor-rev6
+          - const: google,lazor-rev7
+          - const: google,lazor-rev8
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (newest rev)
+        items:
+          - const: google,lazor
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku2
+          - const: google,lazor-rev2-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku2
+          - const: google,lazor-rev4-sku2
+          - const: google,lazor-rev5-sku2
+          - const: google,lazor-rev6-sku2
+          - const: google,lazor-rev7-sku2
+          - const: google,lazor-rev8-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (newest rev)
+        items:
+          - const: google,lazor-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku0
+          - const: google,lazor-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku0
+          - const: google,lazor-rev4-sku0
+          - const: google,lazor-rev5-sku0
+          - const: google,lazor-rev6-sku0
+          - const: google,lazor-rev7-sku0
+          - const: google,lazor-rev8-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (newest rev)
+        items:
+          - const: google,lazor-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (rev4 - rev8)
+        items:
+          - const: google,lazor-rev4-sku4
+          - const: google,lazor-rev5-sku4
+          - const: google,lazor-rev6-sku4
+          - const: google,lazor-rev7-sku4
+          - const: google,lazor-rev8-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (newest rev)
+        items:
+          - const: google,lazor-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev4)
+        items:
+          - const: google,lazor-rev4-sku5
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8)
+        items:
+          - const: google,lazor-rev5-sku5
+          - const: google,lazor-rev5-sku6
+          - const: google,lazor-rev6-sku6
+          - const: google,lazor-rev7-sku6
+          - const: google,lazor-rev8-sku6
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (newest rev)
+        items:
+          - const: google,lazor-sku6
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (newest rev)
+        items:
+          - const: google,mrbland-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (newest rev)
+        items:
+          - const: google,mrbland-sku1024
+          - const: google,mrbland-sku768
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with Parade (newest rev)
+        items:
+          - const: google,pazquel-sku5
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with TI (newest rev)
+        items:
+          - const: google,pazquel-sku1
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and Parade (newest rev)
+        items:
+          - const: google,pazquel-sku6
+          - const: google,pazquel-sku4
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and TI (newest rev)
+        items:
+          - const: google,pazquel-sku0
+          - const: google,pazquel-sku2
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with LTE (newest rev)
+        items:
+          - const: google,pazquel-sku22
+          - const: google,pazquel-sku20
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with WiFi (newest rev)
+        items:
+          - const: google,pazquel-sku21
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev1)
+        items:
+          - const: google,pompom-rev1
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev2)
+        items:
+          - const: google,pompom-rev2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (newest rev)
+        items:
+          - const: google,pompom
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev1)
+        items:
+          - const: google,pompom-rev1-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev2)
+        items:
+          - const: google,pompom-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (newest rev)
+        items:
+          - const: google,pompom-sku0
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick (newest rev)
+        items:
+          - const: google,quackingstick-sku1537
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick with LTE (newest rev)
+        items:
+          - const: google,quackingstick-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Trogdor (newest rev)
+        items:
+          - const: google,trogdor
+          - const: qcom,sc7180
+
+      - description: Google Trogdor with LTE (newest rev)
+        items:
+          - const: google,trogdor-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev)
+        items:
+          - const: google,wormdingler-sku1024
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1025
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev)
+        items:
+          - const: google,wormdingler-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1
+          - const: qcom,sc7180
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)
+        items:
+          - const: qcom,sc7280-crd
+          - const: google,hoglin-rev3
+          - const: google,hoglin-rev4
+          - const: google,piglin-rev3
+          - const: google,piglin-rev4
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev)
+        items:
+          - const: google,zoglin
+          - const: google,hoglin
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD Pro platform (newest rev)
+        items:
+          - const: google,zoglin-sku1536
+          - const: google,hoglin-sku1536
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform
+        items:
+          - const: qcom,sc7280-idp
+          - const: google,senor
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform
+        items:
+          - const: qcom,sc7280-idp2
+          - const: google,piglin
+          - const: qcom,sc7280
+
+      - description: Google Evoker (newest rev)
+        items:
+          - const: google,evoker
+          - const: qcom,sc7280
+
+      - description: Google Evoker with LTE (newest rev)
+        items:
+          - const: google,evoker-sku512
+          - const: qcom,sc7280
+
+      - description: Google Herobrine (newest rev)
+        items:
+          - const: google,herobrine
+          - const: qcom,sc7280
+
+      - description: Google Villager (rev0)
+        items:
+          - const: google,villager-rev0
+          - const: qcom,sc7280
+
+      - description: Google Villager (newest rev)
+        items:
+          - const: google,villager
+          - const: qcom,sc7280
+
+      - description: Google Villager with LTE (newest rev)
+        items:
+          - const: google,villager-sku512
+          - const: qcom,sc7280
+
+      - description: Google Zombie (newest rev)
+        items:
+          - const: google,zombie
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE (newest rev)
+        items:
+          - const: google,zombie-sku512
+          - const: qcom,sc7280
+
+      - description: Google Zombie with NVMe (newest rev)
+        items:
+          - const: google,zombie-sku2
+          - const: google,zombie-sku3
+          - const: google,zombie-sku515
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE and NVMe (newest rev)
+        items:
+          - const: google,zombie-sku514
+          - const: qcom,sc7280
+
+      - items:
+          - enum:
+              - lenovo,flex-5g
+              - microsoft,surface-prox
+              - qcom,sc8180x-primus
+          - const: qcom,sc8180x
+
+      - items:
+          - enum:
+              - lenovo,thinkpad-x13s
+              - qcom,sc8280xp-crd
+              - qcom,sc8280xp-qrd
+          - const: qcom,sc8280xp
+
+      - items:
+          - enum:
+              - motorola,ali
+          - const: qcom,sdm450
+
+      - items:
+          - enum:
+              - sony,discovery-row
+              - sony,kirin-row
+              - sony,pioneer-row
+              - sony,voyager-row
+          - const: qcom,sdm630
+
+      - items:
+          - enum:
+              - inforce,ifc6560
+          - const: qcom,sda660
+
+      - items:
+          - enum:
+              - fairphone,fp3
+              - motorola,ocean
+          - const: qcom,sdm632
+
+      - items:
+          - enum:
+              - sony,mermaid-row
+          - const: qcom,sdm636
+
+      - items:
+          - enum:
+              - xiaomi,lavender
+          - const: qcom,sdm660
+
+      - items:
+          - enum:
+              - google,sargo
+          - const: qcom,sdm670
+
+      - items:
+          - enum:
+              - qcom,sdx55-mtp
+              - qcom,sdx55-telit-fn980-tlb
+              - qcom,sdx55-t55
+          - const: qcom,sdx55
+
+      - items:
+          - enum:
+              - qcom,sdx65-mtp
+          - const: qcom,sdx65
+
+      - items:
+          - enum:
+              - qcom,sdx75-idp
+          - const: qcom,sdx75
+
+      - items:
+          - enum:
+              - qcom,ipq6018-cp01
+              - qcom,ipq6018-cp01-c1
+          - const: qcom,ipq6018
+
+      - items:
+          - enum:
+              - qcom,qcs404-evb-1000
+              - qcom,qcs404-evb-4000
+          - const: qcom,qcs404-evb
+          - const: qcom,qcs404
+
+      - items:
+          - enum:
+              - qcom,sa8155p-adp
+          - const: qcom,sa8155p
+
+      - items:
+          - enum:
+              - qcom,sa8295p-adp
+              - qcom,sa8540p-ride
+          - const: qcom,sa8540p
+
+      - items:
+          - enum:
+              - qcom,sa8775p-ride
+          - const: qcom,sa8775p
+
+      - items:
+          - enum:
+              - google,cheza
+              - google,cheza-rev1
+              - google,cheza-rev2
+              - lenovo,yoga-c630
+              - lg,judyln
+              - lg,judyp
+              - oneplus,enchilada
+              - oneplus,fajita
+              - qcom,sdm845-mtp
+              - shift,axolotl
+              - samsung,starqltechn
+              - samsung,w737
+              - sony,akari-row
+              - sony,akatsuki-row
+              - sony,apollo-row
+              - thundercomm,db845c
+              - xiaomi,beryllium
+              - xiaomi,beryllium-ebbg
+              - xiaomi,polaris
+          - const: qcom,sdm845
+
+      - items:
+          - enum:
+              - oneplus,billie2
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
+              - qcom,qrb4210-rb2
+          - const: qcom,qrb4210
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
+              - qcom,sm4450-qrd
+          - const: qcom,sm4450
+
+      - items:
+          - enum:
+              - fxtec,pro1x
+          - const: qcom,sm6115
+
+      - items:
+          - enum:
+              - lenovo,j606f
+          - const: qcom,sm6115p
+          - const: qcom,sm6115
+
+      - items:
+          - enum:
+              - sony,pdx201
+              - xiaomi,laurel-sprout
+          - const: qcom,sm6125
+
+      - items:
+          - enum:
+              - sony,pdx213
+          - const: qcom,sm6350
+
+      - items:
+          - enum:
+              - sony,pdx225
+          - const: qcom,sm6375
+
+      - items:
+          - enum:
+              - fairphone,fp4
+          - const: qcom,sm7225
+
+      - items:
+          - enum:
+              - microsoft,surface-duo
+              - qcom,sm8150-hdk
+              - qcom,sm8150-mtp
+              - sony,bahamut-generic
+              - sony,griffin-generic
+          - const: qcom,sm8150
+
+      - items:
+          - enum:
+              - qcom,qrb5165-rb5
+              - qcom,sm8250-hdk
+              - qcom,sm8250-mtp
+              - sony,pdx203-generic
+              - sony,pdx206-generic
+              - xiaomi,elish
+          - const: qcom,sm8250
+
+      - items:
+          - enum:
+              - microsoft,surface-duo2
+              - qcom,sm8350-hdk
+              - qcom,sm8350-mtp
+              - sony,pdx214-generic
+              - sony,pdx215-generic
+          - const: qcom,sm8350
+
+      - items:
+          - enum:
+              - qcom,sm8450-hdk
+              - qcom,sm8450-qrd
+              - sony,pdx223
+              - sony,pdx224
+          - const: qcom,sm8450
+
+      - items:
+          - enum:
+              - qcom,sm8550-mtp
+              - qcom,sm8550-qrd
+          - const: qcom,sm8550
+
+  # Board compatibles go above
+
+  qcom,msm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    items:
+      items:
+        - description: |
+            MSM chipset ID - an exact match value consisting of two bitfields::
+             - bits 0-15  - The unique MSM chipset ID
+             - bits 16-31 - Reserved; should be 0
+        - description: |
+            Hardware revision ID - a chipset specific 32-bit ID representing
+            the version of the chipset.  It is best a match value - the
+            bootloader will look for the closest possible match.
+    deprecated: true
+    description:
+      The MSM chipset and hardware revision used Qualcomm bootloaders.  It
+      can optionally be an array of these to indicate multiple hardware that
+      use the same device tree.  It is expected that the bootloader will use
+      this information at boot-up to decide which device tree to use when given
+      multiple device trees, some of which may not be compatible with the
+      actual hardware.  It is the bootloader's responsibility to pass the
+      correct device tree to the kernel.
+      The property is deprecated.
+
+  qcom,board-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    oneOf:
+      - items:
+          - items:
+              - description: |
+                  Board ID consisting of three bitfields::
+                    - bits 31-24 - Unused
+                    - bits 23-16 - Platform Version Major
+                    - bits 15-8  - Platform Version Minor
+                    - bits 7-0   - Platform Type
+                  Platform Type field is an exact match value.  The
+                  Platform Major/Minor field is a best match.  The bootloader will
+                  look for the closest possible match.
+              - description: |
+                  Subtype ID unique to a Platform Type/Chipset ID.  For a given
+                  Platform Type, there will typically only be a single board and the
+                  subtype_id will be 0.  However in some cases board variants may
+                  need to be distinguished by different subtype_id values.
+      - items:
+          # OnePlus uses a variant of board-id with four elements:
+          - items:
+              - const: 8
+              - const: 0
+              - description: OnePlus board ID
+              - description: OnePlus subtype ID
+    deprecated: true
+    description:
+      The board type and revision information.  It can optionally be an array
+      of these to indicate multiple boards that use the same device tree.  It
+      is expected that the bootloader will use this information at boot-up to
+      decide which device tree to use when given multiple device trees, some of
+      which may not be compatible with the actual hardware.  It is the
+      bootloader's responsibility to pass the correct device tree to the
+      kernel
+      The property is deprecated.
+
+allOf:
+  # Explicit allow-list for older SoCs. The legacy properties are not allowed
+  # on newer SoCs.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8026
+              - qcom,apq8094
+              - qcom,apq8096
+              - qcom,msm8939
+              - qcom,msm8953
+              - qcom,msm8956
+              - qcom,msm8992
+              - qcom,msm8994
+              - qcom,msm8996
+              - qcom,msm8998
+              - qcom,sdm450
+              - qcom,sdm630
+              - qcom,sdm632
+              - qcom,sdm636
+              - qcom,sdm845
+              - qcom,sdx55
+              - qcom,sdx65
+              - qcom,sdx75
+              - qcom,sm4250
+              - qcom,sm6115
+              - qcom,sm6125
+              - qcom,sm6350
+              - qcom,sm7225
+              - qcom,sm8150
+              - qcom,sm8250
+    then:
+      properties:
+        qcom,board-id: true
+        qcom,msm-id: true
+    else:
+      properties:
+        qcom,board-id: false
+        qcom,msm-id: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - oneplus,enchilada
+              - oneplus,fajita
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
+    then:
+      properties:
+        qcom,board-id:
+          items:
+            minItems: 4
+    else:
+      properties:
+        qcom,board-id:
+          items:
+            maxItems: 2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml
new file mode 100644
index 0000000000..09241ea1d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rda.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/rda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro platforms
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    items:
+      - enum:
+          - xunlong,orangepi-2g-iot     # Orange Pi 2G-IoT
+          - xunlong,orangepi-i96        # Orange Pi i96
+      - const: rda,8810pl
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml
new file mode 100644
index 0000000000..ddd9a85099
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/realtek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek platforms
+
+maintainers:
+  - Andreas Färber <afaerber@suse.de>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      # RTD1195 SoC based boards
+      - items:
+          - enum:
+              - mele,x1000 # MeLE X1000
+              - realtek,horseradish # Realtek Horseradish EVB
+          - const: realtek,rtd1195
+
+      # RTD1293 SoC based boards
+      - items:
+          - enum:
+              - synology,ds418j # Synology DiskStation DS418j
+          - const: realtek,rtd1293
+
+      # RTD1295 SoC based boards
+      - items:
+          - enum:
+              - mele,v9 # MeLE V9
+              - probox2,ava # ProBox2 AVA
+              - xnano,x5 # Xnano X5
+              - zidoo,x9s # Zidoo X9S
+          - const: realtek,rtd1295
+
+      # RTD1296 SoC based boards
+      - items:
+          - enum:
+              - synology,ds418 # Synology DiskStation DS418
+          - const: realtek,rtd1296
+
+      # RTD1395 SoC based boards
+      - items:
+          - enum:
+              - bananapi,bpi-m4 # Banana Pi BPI-M4
+              - realtek,lion-skin # Realtek Lion Skin EVB
+          - const: realtek,rtd1395
+
+      # RTD1619 SoC based boards
+      - items:
+          - enum:
+              - realtek,mjolnir # Realtek Mjolnir EVB
+          - const: realtek,rtd1619
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
new file mode 100644
index 0000000000..ca53898628
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -0,0 +1,902 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip platforms
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition)
+        items:
+          - const: vamrs,ficus
+          - const: rockchip,rk3399
+
+      - description: 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
+        items:
+          - const: vamrs,rock960
+          - const: rockchip,rk3399
+
+      - description: Amarula Vyasa RK3288
+        items:
+          - const: amarula,vyasa-rk3288
+          - const: rockchip,rk3288
+
+      - description: Anbernic RG351M
+        items:
+          - const: anbernic,rg351m
+          - const: rockchip,rk3326
+
+      - description: Anbernic RG353P
+        items:
+          - const: anbernic,rg353p
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG353PS
+        items:
+          - const: anbernic,rg353ps
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG353V
+        items:
+          - const: anbernic,rg353v
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG353VS
+        items:
+          - const: anbernic,rg353vs
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG503
+        items:
+          - const: anbernic,rg503
+          - const: rockchip,rk3566
+
+      - description: Asus Tinker board
+        items:
+          - const: asus,rk3288-tinker
+          - const: rockchip,rk3288
+
+      - description: Asus Tinker board S
+        items:
+          - const: asus,rk3288-tinker-s
+          - const: rockchip,rk3288
+
+      - description: Beelink A1
+        items:
+          - const: azw,beelink-a1
+          - const: rockchip,rk3328
+
+      - description: bq Curie 2 tablet
+        items:
+          - const: mundoreader,bq-curie2
+          - const: rockchip,rk3066a
+
+      - description: bq Edison 2 Quad-Core tablet
+        items:
+          - const: mundoreader,bq-edison2qc
+          - const: rockchip,rk3188
+
+      - description: ChipSPARK PopMetal-RK3288
+        items:
+          - const: chipspark,popmetal-rk3288
+          - const: rockchip,rk3288
+
+      - description: ChipSPARK Rayeager PX2
+        items:
+          - const: chipspark,rayeager-px2
+          - const: rockchip,rk3066a
+
+      - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
+          - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
+          - const: rockchip,rv1126
+
+      - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-6a-io  # Edgeble Neural Compute Module 6A IO Board
+          - const: edgeble,neural-compute-module-6a     # Edgeble Neural Compute Module 6A SoM
+          - const: rockchip,rk3588
+
+      - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-6b-io  # Edgeble Neural Compute Module 6B IO Board
+          - const: edgeble,neural-compute-module-6b     # Edgeble Neural Compute Module 6B SoM
+          - const: rockchip,rk3588
+
+      - description: Elgin RV1108 R1
+        items:
+          - const: elgin,rv1108-r1
+          - const: rockchip,rv1108
+
+      - description: EmbedFire LubanCat 1
+        items:
+          - const: embedfire,lubancat-1
+          - const: rockchip,rk3566
+
+      - description: EmbedFire LubanCat 2
+        items:
+          - const: embedfire,lubancat-2
+          - const: rockchip,rk3568
+
+      - description: Engicam PX30.Core C.TOUCH 2.0
+        items:
+          - const: engicam,px30-core-ctouch2
+          - const: engicam,px30-core
+          - const: rockchip,px30
+
+      - description: Engicam PX30.Core C.TOUCH 2.0 10.1" Open Frame
+        items:
+          - const: engicam,px30-core-ctouch2-of10
+          - const: engicam,px30-core
+          - const: rockchip,px30
+
+      - description: Engicam PX30.Core EDIMM2.2 Starter Kit
+        items:
+          - const: engicam,px30-core-edimm2.2
+          - const: engicam,px30-core
+          - const: rockchip,px30
+
+      - description: Firefly Firefly-RK3288
+        items:
+          - enum:
+              - firefly,firefly-rk3288
+              - firefly,firefly-rk3288-beta
+          - const: rockchip,rk3288
+
+      - description: Firefly Firefly-RK3288 Reload
+        items:
+          - const: firefly,firefly-rk3288-reload
+          - const: rockchip,rk3288
+
+      - description: Firefly Firefly-RK3399
+        items:
+          - const: firefly,firefly-rk3399
+          - const: rockchip,rk3399
+
+      - description: Firefly ROC-RK3308-CC
+        items:
+          - const: firefly,roc-rk3308-cc
+          - const: rockchip,rk3308
+
+      - description: Firefly roc-rk3328-cc
+        items:
+          - const: firefly,roc-rk3328-cc
+          - const: rockchip,rk3328
+
+      - description: Firefly ROC-RK3328-PC
+        items:
+          - const: firefly,roc-rk3328-pc
+          - const: rockchip,rk3328
+
+      - description: Firefly ROC-RK3399-PC
+        items:
+          - enum:
+              - firefly,roc-rk3399-pc
+              - firefly,roc-rk3399-pc-mezzanine
+          - const: rockchip,rk3399
+
+      - description: Firefly ROC-RK3399-PC-PLUS
+        items:
+          - enum:
+              - firefly,roc-rk3399-pc-plus
+          - const: rockchip,rk3399
+
+      - description: Firefly Station M2
+        items:
+          - const: firefly,rk3566-roc-pc
+          - const: rockchip,rk3566
+
+      - description: Firefly Station P2
+        items:
+          - const: firefly,rk3568-roc-pc
+          - const: rockchip,rk3568
+
+      - description: FriendlyElec NanoPi R2 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r2c
+              - friendlyarm,nanopi-r2c-plus
+              - friendlyarm,nanopi-r2s
+          - const: rockchip,rk3328
+
+      - description: FriendlyElec NanoPi4 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopc-t4
+              - friendlyarm,nanopi-m4
+              - friendlyarm,nanopi-m4b
+              - friendlyarm,nanopi-neo4
+              - friendlyarm,nanopi-r4s
+              - friendlyarm,nanopi-r4s-enterprise
+          - const: rockchip,rk3399
+
+      - description: FriendlyElec NanoPi R5 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r5c
+              - friendlyarm,nanopi-r5s
+          - const: rockchip,rk3568
+
+      - description: FriendlyElec NanoPC T6
+        items:
+          - const: friendlyarm,nanopc-t6
+          - const: rockchip,rk3588
+
+      - description: GeekBuying GeekBox
+        items:
+          - const: geekbuying,geekbox
+          - const: rockchip,rk3368
+
+      - description: Google Bob (Asus Chromebook Flip C101PA)
+        items:
+          - const: google,bob-rev13
+          - const: google,bob-rev12
+          - const: google,bob-rev11
+          - const: google,bob-rev10
+          - const: google,bob-rev9
+          - const: google,bob-rev8
+          - const: google,bob-rev7
+          - const: google,bob-rev6
+          - const: google,bob-rev5
+          - const: google,bob-rev4
+          - const: google,bob
+          - const: google,gru
+          - const: rockchip,rk3399
+
+      - description: Google Brain (dev-board)
+        items:
+          - const: google,veyron-brain-rev0
+          - const: google,veyron-brain
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Fievel (AOPEN Chromebox Mini)
+        items:
+          - const: google,veyron-fievel-rev8
+          - const: google,veyron-fievel-rev7
+          - const: google,veyron-fievel-rev6
+          - const: google,veyron-fievel-rev5
+          - const: google,veyron-fievel-rev4
+          - const: google,veyron-fievel-rev3
+          - const: google,veyron-fievel-rev2
+          - const: google,veyron-fievel-rev1
+          - const: google,veyron-fievel-rev0
+          - const: google,veyron-fievel
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Gru (dev-board)
+        items:
+          - const: google,gru-rev15
+          - const: google,gru-rev14
+          - const: google,gru-rev13
+          - const: google,gru-rev12
+          - const: google,gru-rev11
+          - const: google,gru-rev10
+          - const: google,gru-rev9
+          - const: google,gru-rev8
+          - const: google,gru-rev7
+          - const: google,gru-rev6
+          - const: google,gru-rev5
+          - const: google,gru-rev4
+          - const: google,gru-rev3
+          - const: google,gru-rev2
+          - const: google,gru
+          - const: rockchip,rk3399
+
+      - description: Google Jaq (Haier Chromebook 11 and more w/ uSD)
+        items:
+          - const: google,veyron-jaq-rev5
+          - const: google,veyron-jaq-rev4
+          - const: google,veyron-jaq-rev3
+          - const: google,veyron-jaq-rev2
+          - const: google,veyron-jaq-rev1
+          - const: google,veyron-jaq
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Jerry (Hisense Chromebook C11 and more)
+        items:
+          - const: google,veyron-jerry-rev15
+          - const: google,veyron-jerry-rev14
+          - const: google,veyron-jerry-rev13
+          - const: google,veyron-jerry-rev12
+          - const: google,veyron-jerry-rev11
+          - const: google,veyron-jerry-rev10
+          - const: google,veyron-jerry-rev7
+          - const: google,veyron-jerry-rev6
+          - const: google,veyron-jerry-rev5
+          - const: google,veyron-jerry-rev4
+          - const: google,veyron-jerry-rev3
+          - const: google,veyron-jerry
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Kevin (Samsung Chromebook Plus)
+        items:
+          - const: google,kevin-rev15
+          - const: google,kevin-rev14
+          - const: google,kevin-rev13
+          - const: google,kevin-rev12
+          - const: google,kevin-rev11
+          - const: google,kevin-rev10
+          - const: google,kevin-rev9
+          - const: google,kevin-rev8
+          - const: google,kevin-rev7
+          - const: google,kevin-rev6
+          - const: google,kevin
+          - const: google,gru
+          - const: rockchip,rk3399
+
+      - description: Google Mickey (Asus Chromebit CS10)
+        items:
+          - const: google,veyron-mickey-rev8
+          - const: google,veyron-mickey-rev7
+          - const: google,veyron-mickey-rev6
+          - const: google,veyron-mickey-rev5
+          - const: google,veyron-mickey-rev4
+          - const: google,veyron-mickey-rev3
+          - const: google,veyron-mickey-rev2
+          - const: google,veyron-mickey-rev1
+          - const: google,veyron-mickey-rev0
+          - const: google,veyron-mickey
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Mighty (Haier Chromebook 11 and more w/ SD)
+        items:
+          - const: google,veyron-mighty-rev5
+          - const: google,veyron-mighty-rev4
+          - const: google,veyron-mighty-rev3
+          - const: google,veyron-mighty-rev2
+          - const: google,veyron-mighty-rev1
+          - const: google,veyron-mighty
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Minnie (Asus Chromebook Flip C100P)
+        items:
+          - const: google,veyron-minnie-rev4
+          - const: google,veyron-minnie-rev3
+          - const: google,veyron-minnie-rev2
+          - const: google,veyron-minnie-rev1
+          - const: google,veyron-minnie-rev0
+          - const: google,veyron-minnie
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Pinky (dev-board)
+        items:
+          - const: google,veyron-pinky-rev2
+          - const: google,veyron-pinky
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100)
+        items:
+          - const: google,scarlet-rev15-sku0
+          - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku0
+          - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku0
+          - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku0
+          - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku0
+          - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku0
+          - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku0
+          - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku0
+          - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku0
+          - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku0
+          - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku0
+          - const: google,scarlet-rev5
+          - const: google,scarlet
+          - const: google,gru
+          - const: rockchip,rk3399
+
+      - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10)
+        items:
+          - const: google,scarlet-rev15-sku7
+          - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku7
+          - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku7
+          - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku7
+          - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku7
+          - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku7
+          - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku7
+          - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku7
+          - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku7
+          - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku7
+          - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku7
+          - const: google,scarlet-rev5
+          - const: google,scarlet-rev4-sku7
+          - const: google,scarlet-rev4
+          - const: google,scarlet-rev3-sku7
+          - const: google,scarlet-rev3
+          - const: google,scarlet
+          - const: google,gru
+          - const: rockchip,rk3399
+
+      - description: |
+          Google Scarlet - Innolux display (Acer Chromebook Tab 10 and more)
+        items:
+          - const: google,scarlet-rev15-sku2
+          - const: google,scarlet-rev15-sku4
+          - const: google,scarlet-rev15-sku6
+          - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku2
+          - const: google,scarlet-rev14-sku4
+          - const: google,scarlet-rev14-sku6
+          - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku2
+          - const: google,scarlet-rev13-sku4
+          - const: google,scarlet-rev13-sku6
+          - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku2
+          - const: google,scarlet-rev12-sku4
+          - const: google,scarlet-rev12-sku6
+          - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku2
+          - const: google,scarlet-rev11-sku4
+          - const: google,scarlet-rev11-sku6
+          - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku2
+          - const: google,scarlet-rev10-sku4
+          - const: google,scarlet-rev10-sku6
+          - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku2
+          - const: google,scarlet-rev9-sku4
+          - const: google,scarlet-rev9-sku6
+          - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku2
+          - const: google,scarlet-rev8-sku4
+          - const: google,scarlet-rev8-sku6
+          - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku2
+          - const: google,scarlet-rev7-sku4
+          - const: google,scarlet-rev7-sku6
+          - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku2
+          - const: google,scarlet-rev6-sku4
+          - const: google,scarlet-rev6-sku6
+          - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku2
+          - const: google,scarlet-rev5-sku4
+          - const: google,scarlet-rev5-sku6
+          - const: google,scarlet-rev5
+          - const: google,scarlet-rev4-sku2
+          - const: google,scarlet-rev4-sku4
+          - const: google,scarlet-rev4-sku6
+          - const: google,scarlet-rev4
+          - const: google,scarlet
+          - const: google,gru
+          - const: rockchip,rk3399
+
+      - description: Google Speedy (Asus C201 Chromebook)
+        items:
+          - const: google,veyron-speedy-rev9
+          - const: google,veyron-speedy-rev8
+          - const: google,veyron-speedy-rev7
+          - const: google,veyron-speedy-rev6
+          - const: google,veyron-speedy-rev5
+          - const: google,veyron-speedy-rev4
+          - const: google,veyron-speedy-rev3
+          - const: google,veyron-speedy-rev2
+          - const: google,veyron-speedy
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Google Tiger (AOpen Chromebase Mini)
+        items:
+          - const: google,veyron-tiger-rev8
+          - const: google,veyron-tiger-rev7
+          - const: google,veyron-tiger-rev6
+          - const: google,veyron-tiger-rev5
+          - const: google,veyron-tiger-rev4
+          - const: google,veyron-tiger-rev3
+          - const: google,veyron-tiger-rev2
+          - const: google,veyron-tiger-rev1
+          - const: google,veyron-tiger-rev0
+          - const: google,veyron-tiger
+          - const: google,veyron
+          - const: rockchip,rk3288
+
+      - description: Haoyu MarsBoard RK3066
+        items:
+          - const: haoyu,marsboard-rk3066
+          - const: rockchip,rk3066a
+
+      - description: Hardkernel Odroid Go Advance
+        items:
+          - const: hardkernel,rk3326-odroid-go2
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Advance Black Edition
+        items:
+          - const: hardkernel,rk3326-odroid-go2-v11
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Super
+        items:
+          - const: hardkernel,rk3326-odroid-go3
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid M1
+        items:
+          - const: rockchip,rk3568-odroid-m1
+          - const: rockchip,rk3568
+
+      - description: Hugsun X99 TV Box
+        items:
+          - const: hugsun,x99
+          - const: rockchip,rk3399
+
+      - description: Indiedroid Nova SBC
+        items:
+          - const: indiedroid,nova
+          - const: rockchip,rk3588s
+
+      - description: Khadas Edge series boards
+        items:
+          - enum:
+              - khadas,edge
+              - khadas,edge-captain
+              - khadas,edge-v
+          - const: rockchip,rk3399
+
+      - description: Khadas Edge2 series boards
+        items:
+          - const: khadas,edge2
+          - const: rockchip,rk3588s
+
+      - description: Kobol Helios64
+        items:
+          - const: kobol,helios64
+          - const: rockchip,rk3399
+
+      - description: Mecer Xtreme Mini S6
+        items:
+          - const: mecer,xms6
+          - const: rockchip,rk3229
+
+      - description: Leez RK3399 P710
+        items:
+          - const: leez,p710
+          - const: rockchip,rk3399
+
+      - description: Lunzn FastRhino R66S / R68S
+        items:
+          - enum:
+              - lunzn,fastrhino-r66s
+              - lunzn,fastrhino-r68s
+          - const: rockchip,rk3568
+
+      - description: mqmaker MiQi
+        items:
+          - const: mqmaker,miqi
+          - const: rockchip,rk3288
+
+      - description: Netxeon R89 board
+        items:
+          - const: netxeon,r89
+          - const: rockchip,rk3288
+
+      - description: OPEN AI LAB EAIDK-610
+        items:
+          - const: openailab,eaidk-610
+          - const: rockchip,rk3399
+
+      - description: Orange Pi RK3399 board
+        items:
+          - const: rockchip,rk3399-orangepi
+          - const: rockchip,rk3399
+
+      - description: Phytec phyCORE-RK3288 Rapid Development Kit
+        items:
+          - const: phytec,rk3288-pcm-947
+          - const: phytec,rk3288-phycore-som
+          - const: rockchip,rk3288
+
+      - description: Pine64 PinebookPro
+        items:
+          - const: pine64,pinebook-pro
+          - const: rockchip,rk3399
+
+      - description: Pine64 PineNote
+        items:
+          - enum:
+              - pine64,pinenote-v1.1
+              - pine64,pinenote-v1.2
+          - const: pine64,pinenote
+          - const: rockchip,rk3566
+
+      - description: Pine64 PinePhonePro
+        items:
+          - const: pine64,pinephone-pro
+          - const: rockchip,rk3399
+
+      - description: Pine64 Rock64
+        items:
+          - const: pine64,rock64
+          - const: rockchip,rk3328
+
+      - description: Pine64 RockPro64
+        items:
+          - enum:
+              - pine64,rockpro64-v2.1
+              - pine64,rockpro64-v2.0
+          - const: pine64,rockpro64
+          - const: rockchip,rk3399
+
+      - description: Pine64 Quartz64 Model A/B
+        items:
+          - enum:
+              - pine64,quartz64-a
+              - pine64,quartz64-b
+          - const: rockchip,rk3566
+
+      - description: Pine64 SoQuartz SoM
+        items:
+          - enum:
+              - pine64,soquartz-blade
+              - pine64,soquartz-cm4io
+              - pine64,soquartz-model-a
+          - const: pine64,soquartz
+          - const: rockchip,rk3566
+
+      - description: Radxa Compute Module 3(CM3)
+        items:
+          - enum:
+              - radxa,cm3-io
+          - const: radxa,cm3
+          - const: rockchip,rk3566
+
+      - description: Radxa CM3 Industrial
+        items:
+          - enum:
+              - radxa,e25
+          - const: radxa,cm3i
+          - const: rockchip,rk3568
+
+      - description: Radxa Rock
+        items:
+          - const: radxa,rock
+          - const: rockchip,rk3188
+
+      - description: Radxa ROCK Pi 4A/A+/B/B+/C
+        items:
+          - enum:
+              - radxa,rockpi4a
+              - radxa,rockpi4a-plus
+              - radxa,rockpi4b
+              - radxa,rockpi4b-plus
+              - radxa,rockpi4c
+          - const: radxa,rockpi4
+          - const: rockchip,rk3399
+
+      - description: Radxa ROCK 4C+
+        items:
+          - const: radxa,rock-4c-plus
+          - const: rockchip,rk3399
+
+      - description: Radxa ROCK 4SE
+        items:
+          - const: radxa,rock-4se
+          - const: rockchip,rk3399
+
+      - description: Radxa ROCK Pi E
+        items:
+          - const: radxa,rockpi-e
+          - const: rockchip,rk3328
+
+      - description: Radxa ROCK Pi N8
+        items:
+          - const: radxa,rockpi-n8
+          - const: vamrs,rk3288-vmarc-som
+          - const: rockchip,rk3288
+
+      - description: Radxa ROCK Pi N10
+        items:
+          - const: radxa,rockpi-n10
+          - const: vamrs,rk3399pro-vmarc-som
+          - const: rockchip,rk3399pro
+
+      - description: Radxa ROCK Pi S
+        items:
+          - const: radxa,rockpis
+          - const: rockchip,rk3308
+
+      - description: Radxa Rock2 Square
+        items:
+          - const: radxa,rock2-square
+          - const: rockchip,rk3288
+
+      - description: Radxa ROCK3 Model A
+        items:
+          - const: radxa,rock3a
+          - const: rockchip,rk3568
+
+      - description: Radxa ROCK 5 Model A
+        items:
+          - const: radxa,rock-5a
+          - const: rockchip,rk3588s
+
+      - description: Radxa ROCK 5 Model B
+        items:
+          - const: radxa,rock-5b
+          - const: rockchip,rk3588
+
+      - description: Rikomagic MK808 v1
+        items:
+          - const: rikomagic,mk808
+          - const: rockchip,rk3066a
+
+      - description: Rockchip Kylin
+        items:
+          - const: rockchip,rk3036-kylin
+          - const: rockchip,rk3036
+
+      - description: Rockchip PX3 Evaluation board
+        items:
+          - const: rockchip,px3-evb
+          - const: rockchip,px3
+          - const: rockchip,rk3188
+
+      - description: Rockchip PX30 Evaluation board
+        items:
+          - const: rockchip,px30-evb
+          - const: rockchip,px30
+
+      - description: Rockchip PX5 Evaluation board
+        items:
+          - const: rockchip,px5-evb
+          - const: rockchip,px5
+          - const: rockchip,rk3368
+
+      - description: Rockchip R88
+        items:
+          - const: rockchip,r88
+          - const: rockchip,rk3368
+
+      - description: Rockchip RK3036 Evaluation board
+        items:
+          - const: rockchip,rk3036-evb
+          - const: rockchip,rk3036
+
+      - description: Rockchip RK3128 Evaluation board
+        items:
+          - const: rockchip,rk3128-evb
+          - const: rockchip,rk3128
+
+      - description: Rockchip RK3228 Evaluation board
+        items:
+          - const: rockchip,rk3228-evb
+          - const: rockchip,rk3228
+
+      - description: Rockchip RK3229 Evaluation board
+        items:
+          - const: rockchip,rk3229-evb
+          - const: rockchip,rk3229
+
+      - description: Rockchip RK3288 Evaluation board
+        items:
+          - enum:
+              - rockchip,rk3288-evb-act8846
+              - rockchip,rk3288-evb-rk808
+          - const: rockchip,rk3288
+
+      - description: Rockchip RK3308 Evaluation board
+        items:
+          - const: rockchip,rk3308-evb
+          - const: rockchip,rk3308
+
+      - description: Rockchip RK3328 Evaluation board
+        items:
+          - const: rockchip,rk3328-evb
+          - const: rockchip,rk3328
+
+      - description: Rockchip RK3368 Evaluation board (act8846 pmic)
+        items:
+          - const: rockchip,rk3368-evb-act8846
+          - const: rockchip,rk3368
+
+      - description: Rockchip RK3399 Evaluation board
+        items:
+          - const: rockchip,rk3399-evb
+          - const: rockchip,rk3399
+
+      - description: Rockchip RK3399 Sapphire standalone
+        items:
+          - const: rockchip,rk3399-sapphire
+          - const: rockchip,rk3399
+
+      - description: Rockchip RK3399 Sapphire with Excavator Baseboard
+        items:
+          - const: rockchip,rk3399-sapphire-excavator
+          - const: rockchip,rk3399
+
+      - description: Rockchip RK3588 Evaluation board
+        items:
+          - const: rockchip,rk3588-evb1-v10
+          - const: rockchip,rk3588
+
+      - description: Rockchip RV1108 Evaluation board
+        items:
+          - const: rockchip,rv1108-evb
+          - const: rockchip,rv1108
+
+      - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
+        items:
+          - const: tsd,px30-ringneck-haikou
+          - const: rockchip,px30
+
+      - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
+        items:
+          - const: tsd,rk3368-lion-haikou
+          - const: rockchip,rk3368
+
+      - description: Theobroma Systems RK3399-Q7 with Haikou baseboard
+        items:
+          - const: tsd,rk3399-puma-haikou
+          - const: rockchip,rk3399
+
+      - description: Tronsmart Orion R68 Meta
+        items:
+          - const: tronsmart,orion-r68-meta
+          - const: rockchip,rk3368
+
+      - description: Xunlong Orange Pi R1 Plus / LTS
+        items:
+          - enum:
+              - xunlong,orangepi-r1-plus
+              - xunlong,orangepi-r1-plus-lts
+          - const: rockchip,rk3328
+
+      - description: Zkmagic A95X Z2
+        items:
+          - const: zkmagic,a95x-z2
+          - const: rockchip,rk3318
+
+      - description: Rockchip RK3566 BOX Evaluation Demo board
+        items:
+          - const: rockchip,rk3566-box-demo
+          - const: rockchip,rk3566
+
+      - description: Rockchip RK3568 Evaluation board
+        items:
+          - const: rockchip,rk3568-evb1-v10
+          - const: rockchip,rk3568
+
+      - description: Rockchip RK3568 Banana Pi R2 Pro
+        items:
+          - const: rockchip,rk3568-bpi-r2pro
+          - const: rockchip,rk3568
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
new file mode 100644
index 0000000000..b79c81cd9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/rockchip/pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Management Unit (PMU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PMU is used to turn on and off different power domains of the SoCs.
+  This includes the power to the CPU cores.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,px30-pmu
+          - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
+          - rockchip,rk3288-pmu
+          - rockchip,rk3368-pmu
+          - rockchip,rk3399-pmu
+          - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-pmu
+          - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
+          - rockchip,rk3288-pmu
+          - rockchip,rk3368-pmu
+          - rockchip,rk3399-pmu
+          - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    pmu@20004000 {
+      compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
+      reg = <0x20004000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
new file mode 100644
index 0000000000..3b8fbf3c00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt
@@ -0,0 +1,19 @@
+ARM Dual Cluster System Configuration Block
+-------------------------------------------
+
+The Dual Cluster System Configuration Block (DCSCB) provides basic
+functionality for controlling clocks, resets and configuration pins in
+the Dual Cluster System implemented by the Real-Time System Model (RTSM).
+
+Required properties:
+
+- compatible : should be "arm,rtsm,dcscb"
+
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	dcscb@60000000 {
+		compatible = "arm,rtsm,dcscb";
+		reg = <0x60000000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
new file mode 100644
index 0000000000..e3ffd8159a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-boards.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos and S5P SoC based boards
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: S3C2416 based boards
+        items:
+          - enum:
+              - samsung,smdk2416                # Samsung SMDK2416
+          - const: samsung,s3c2416
+
+      - description: S3C6410 based boards
+        items:
+          - enum:
+              - friendlyarm,mini6410            # FriendlyARM Mini6410
+              - samsung,smdk6410                # Samsung SMDK6410
+          - const: samsung,s3c6410
+
+      - description: S5PV210 based boards
+        items:
+          - enum:
+              - aesop,torbreck                  # aESOP Torbreck based on S5PV210
+              - samsung,aquila                  # Samsung Aquila based on S5PC110
+              - samsung,goni                    # Samsung Goni based on S5PC110
+              - yic,smdkc110                    # YIC System SMDKC110 based on S5PC110
+              - yic,smdkv210                    # YIC System SMDKV210 based on S5PV210
+          - const: samsung,s5pv210
+
+      - description: S5PV210 based Aries boards
+        items:
+          - enum:
+              - samsung,fascinate4g             # Samsung Galaxy S Fascinate 4G (SGH-T959P)
+              - samsung,galaxys                 # Samsung Galaxy S (i9000)
+          - const: samsung,aries
+          - const: samsung,s5pv210
+
+      - description: Exynos3250 based boards
+        items:
+          - enum:
+              - samsung,monk                    # Samsung Simband
+              - samsung,rinato                  # Samsung Gear2
+          - const: samsung,exynos3250
+          - const: samsung,exynos3
+
+      - description: Samsung ARTIK5 boards
+        items:
+          - enum:
+              - samsung,artik5-eval             # Samsung ARTIK5 eval board
+          - const: samsung,artik5               # Samsung ARTIK5 module
+          - const: samsung,exynos3250
+          - const: samsung,exynos3
+
+      - description: Exynos4210 based boards
+        items:
+          - enum:
+              - insignal,origen                 # Insignal Origen
+              - samsung,i9100                   # Samsung Galaxy S2 (GT-I9100)
+              - samsung,smdkv310                # Samsung SMDKV310 eval
+              - samsung,trats                   # Samsung Tizen Reference
+              - samsung,universal_c210          # Samsung C210
+          - const: samsung,exynos4210
+          - const: samsung,exynos4
+
+      - description: Samsung Galaxy Tab3 family boards
+        items:
+          - enum:
+              - samsung,t310                    # Samsung Galaxy Tab 3 8.0 WiFi (SM-T310)
+              - samsung,t311                    # Samsung Galaxy Tab 3 8.0 3G (SM-T311)
+              - samsung,t315                    # Samsung Galaxy Tab 3 8.0 LTE (SM-T315)
+          - const: samsung,tab3
+          - const: samsung,exynos4212
+          - const: samsung,exynos4
+
+      - description: Exynos4412 based boards
+        items:
+          - enum:
+              - friendlyarm,tiny4412            # FriendlyARM TINY4412
+              - hardkernel,odroid-u3            # Hardkernel Odroid U3
+              - hardkernel,odroid-x             # Hardkernel Odroid X
+              - hardkernel,odroid-x2            # Hardkernel Odroid X2
+              - insignal,origen4412             # Insignal Origen
+              - samsung,smdk4412                # Samsung SMDK4412 eval
+              - topeet,itop4412-elite           # TOPEET Elite base
+          - const: samsung,exynos4412
+          - const: samsung,exynos4
+
+      - description: Samsung Midas family boards
+        items:
+          - enum:
+              - samsung,i9300                   # Samsung GT-I9300
+              - samsung,i9305                   # Samsung GT-I9305
+              - samsung,n710x                   # Samsung GT-N7100/GT-N7105
+              - samsung,trats2                  # Samsung Tizen Reference
+          - const: samsung,midas
+          - const: samsung,exynos4412
+          - const: samsung,exynos4
+
+      - description: Samsung p4note family boards
+        items:
+          - enum:
+              - samsung,n8010                   # Samsung GT-N8010/GT-N8013
+          - const: samsung,p4note
+          - const: samsung,exynos4412
+          - const: samsung,exynos4
+
+      - description: Exynos5250 based boards
+        items:
+          - enum:
+              - google,snow-rev5                # Google Snow Rev 5+
+              - google,spring                   # Google Spring
+              - insignal,arndale                # Insignal Arndale
+              - samsung,smdk5250                # Samsung SMDK5250 eval
+          - const: samsung,exynos5250
+          - const: samsung,exynos5
+
+      - description: Google Snow Boards (Rev 4+)
+        items:
+          - const: google,snow-rev4
+          - const: google,snow
+          - const: samsung,exynos5250
+          - const: samsung,exynos5
+
+      - description: Exynos5260 based boards
+        items:
+          - enum:
+              - samsung,xyref5260               # Samsung Xyref5260 eval
+          - const: samsung,exynos5260
+          - const: samsung,exynos5
+
+      - description: Exynos5410 based boards
+        items:
+          - enum:
+              - hardkernel,odroid-xu            # Hardkernel Odroid XU
+              - samsung,smdk5410                # Samsung SMDK5410 eval
+          - const: samsung,exynos5410
+          - const: samsung,exynos5
+
+      - description: Exynos5420 based boards
+        items:
+          - enum:
+              - insignal,arndale-octa           # Insignal Arndale Octa
+              - samsung,chagall-wifi            # Samsung SM-T800
+              - samsung,klimt-wifi              # Samsung SM-T700
+              - samsung,smdk5420                # Samsung SMDK5420 eval
+          - const: samsung,exynos5420
+          - const: samsung,exynos5
+
+      - description: Google Peach Pit Boards (Rev 6+)
+        items:
+          - const: google,pit-rev16
+          - const: google,pit-rev15
+          - const: google,pit-rev14
+          - const: google,pit-rev13
+          - const: google,pit-rev12
+          - const: google,pit-rev11
+          - const: google,pit-rev10
+          - const: google,pit-rev9
+          - const: google,pit-rev8
+          - const: google,pit-rev7
+          - const: google,pit-rev6
+          - const: google,pit
+          - const: google,peach
+          - const: samsung,exynos5420
+          - const: samsung,exynos5
+
+      - description: Exynos5800 based boards
+        items:
+          - enum:
+              - hardkernel,odroid-xu3           # Hardkernel Odroid XU3
+              - hardkernel,odroid-xu3-lite      # Hardkernel Odroid XU3 Lite
+              - hardkernel,odroid-xu4           # Hardkernel Odroid XU4
+              - hardkernel,odroid-hc1           # Hardkernel Odroid HC1
+              - samsung,k3g                     # Samsung Galaxy S5 (SM-G900H)
+          - const: samsung,exynos5800
+          - const: samsung,exynos5
+
+      - description: Google Peach Pi Boards (Rev 10+)
+        items:
+          - const: google,pi-rev16
+          - const: google,pi-rev15
+          - const: google,pi-rev14
+          - const: google,pi-rev13
+          - const: google,pi-rev12
+          - const: google,pi-rev11
+          - const: google,pi-rev10
+          - const: google,pi
+          - const: google,peach
+          - const: samsung,exynos5800
+          - const: samsung,exynos5
+
+      - description: Exynos5433 based boards
+        items:
+          - enum:
+              - samsung,tm2                     # Samsung TM2
+              - samsung,tm2e                    # Samsung TM2E
+          - const: samsung,exynos5433
+
+      - description: Exynos7 based boards
+        items:
+          - enum:
+              - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
+          - const: samsung,exynos7
+
+      - description: Exynos7885 based boards
+        items:
+          - enum:
+              - samsung,jackpotlte              # Samsung Galaxy A8 (2018)
+          - const: samsung,exynos7885
+
+      - description: Exynos850 based boards
+        items:
+          - enum:
+              - winlink,e850-96                 # WinLink E850-96
+          - const: samsung,exynos850
+
+      - description: Exynos Auto v9 based boards
+        items:
+          - enum:
+              - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
+          - const: samsung,exynosautov9
+
+required:
+  - compatible
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
new file mode 100644
index 0000000000..3d9abad3c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-secure-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Secure Firmware
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: samsung,secure-firmware
+
+  reg:
+    description:
+      Address of non-secure SYSRAM used for communication with firmware.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware@203f000 {
+      compatible = "samsung,secure-firmware";
+      reg = <0x0203f000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
new file mode 100644
index 0000000000..653f859976
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC compatibles naming convention
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    samsung,SoC-IP
+
+  For example::
+    samsung,exynos5433-cmu-isp
+
+select:
+  properties:
+    compatible:
+      pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Preferred naming style for compatibles of SoC components
+        pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$"
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - samsung,exynos4x12-pinctrl
+          - samsung,exynos4x12-usb2-phy
+          - samsung,s3c64xx-pinctrl
+          - samsung,s3c64xx-wakeup-eint
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt
new file mode 100644
index 0000000000..f27bbff2c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/secure.txt
@@ -0,0 +1,70 @@
+* ARM Secure world bindings
+
+ARM CPUs with TrustZone support have two distinct address spaces,
+"Normal" and "Secure". Most devicetree consumers (including the Linux
+kernel) are not TrustZone aware and run entirely in either the Normal
+world or the Secure world. However some devicetree consumers are
+TrustZone aware and need to be able to determine whether devices are
+visible only in the Secure address space, only in the Normal address
+space, or visible in both. (One example of that situation would be a
+virtual machine which boots Secure firmware and wants to tell the
+firmware about the layout of the machine via devicetree.)
+
+The general principle of the naming scheme for Secure world bindings
+is that any property that needs a different value in the Secure world
+can be supported by prefixing the property name with "secure-". So for
+instance "secure-foo" would override "foo". For property names with
+a vendor prefix, the Secure variant of "vendor,foo" would be
+"vendor,secure-foo". If there is no "secure-" property then the Secure
+world value is the same as specified for the Normal world by the
+non-prefixed property. However, only the properties listed below may
+validly have "secure-" versions; this list will be enlarged on a
+case-by-case basis.
+
+Defining the bindings in this way means that a device tree which has
+been annotated to indicate the presence of Secure-only devices can
+still be processed unmodified by existing Non-secure software (and in
+particular by the kernel).
+
+Note that it is still valid for bindings intended for purely Secure
+world consumers (like kernels that run entirely in Secure) to simply
+describe the view of Secure world using the standard bindings. These
+secure- bindings only need to be used where both the Secure and Normal
+world views need to be described in a single device tree.
+
+Valid Secure world properties
+-----------------------------
+
+- secure-status : specifies whether the device is present and usable
+  in the secure world. The combination of this with "status" allows
+  the various possible combinations of device visibility to be
+  specified. If "secure-status" is not specified it defaults to the
+  same value as "status"; if "status" is not specified either then
+  both default to "okay". This means the following combinations are
+  possible:
+
+   /* Neither specified: default to visible in both S and NS */
+   secure-status = "okay";                          /* visible in both */
+   status = "okay";                                 /* visible in both */
+   status = "okay"; secure-status = "okay";         /* visible in both */
+   secure-status = "disabled";                      /* NS-only */
+   status = "okay"; secure-status = "disabled";     /* NS-only */
+   status = "disabled"; secure-status = "okay";     /* S-only */
+   status = "disabled";                             /* disabled in both */
+   status = "disabled"; secure-status = "disabled"; /* disabled in both */
+
+The secure-chosen node
+----------------------
+
+Similar to the /chosen node which serves as a place for passing data
+between firmware and the operating system, the /secure-chosen node may
+be used to pass data to the Secure OS. Only the properties defined
+below may appear in the /secure-chosen node.
+
+- stdout-path : specifies the device to be used by the Secure OS for
+  its console output. The syntax is the same as for /chosen/stdout-path.
+  If the /secure-chosen node exists but the stdout-path property is not
+  present, the Secure OS should not perform any console output. If
+  /secure-chosen does not exist, the Secure OS should use the value of
+  /chosen/stdout-path instead (that is, use the same device as the
+  Normal world OS).
diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
new file mode 100644
index 0000000000..5a428a8857
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut platforms
+
+maintainers:
+  - Taichi Sugaya <sugaya.taichi@socionext.com>
+  - Takao Orito <orito.takao@socionext.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,milbeaut-m10v-evb
+          - const: socionext,sc2000a
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
new file mode 100644
index 0000000000..72554a4f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/synquacer.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/synquacer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext Synquacer platform
+
+maintainers:
+  - Masahisa Kojima <masahisa.kojima@linaro.org>
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description:
+  Socionext SC2A11B (Synquacer) SoC based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - socionext,developer-box
+          - const: socionext,synquacer
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
new file mode 100644
index 0000000000..3e7f3d927e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier platform
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    const: /
+  compatible:
+    oneOf:
+      - description: LD4 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld4-ref
+          - const: socionext,uniphier-ld4
+      - description: Pro4 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pro4-ace
+              - socionext,uniphier-pro4-ref
+              - socionext,uniphier-pro4-sanji
+          - const: socionext,uniphier-pro4
+      - description: Pro5 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pro5-epcore
+              - socionext,uniphier-pro5-proex
+          - const: socionext,uniphier-pro5
+      - description: sLD8 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-sld8-ref
+          - const: socionext,uniphier-sld8
+      - description: PXs2 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pxs2-gentil
+              - socionext,uniphier-pxs2-vodka
+          - const: socionext,uniphier-pxs2
+      - description: LD6b SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld6b-ref
+          - const: socionext,uniphier-ld6b
+      - description: LD11 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld11-global
+              - socionext,uniphier-ld11-ref
+          - const: socionext,uniphier-ld11
+      - description: LD20 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-ld20-akebi96
+              - socionext,uniphier-ld20-global
+              - socionext,uniphier-ld20-ref
+          - const: socionext,uniphier-ld20
+      - description: PXs3 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pxs3-ref
+          - const: socionext,uniphier-pxs3
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml
new file mode 100644
index 0000000000..c9094e5ec5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express SP810 System Controller
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm SP810 system controller provides clocks, timers and a watchdog.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp810
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp810
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: timclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: timer clock
+      - description: APB register access clock
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 4
+
+  assigned-clocks:
+    maxItems: 4
+
+  assigned-clock-parents:
+    maxItems: 4
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctl@20000 {
+        compatible = "arm,sp810", "arm,primecell";
+        reg = <0x020000 0x1000>;
+        clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+        clock-names = "refclk", "timclk", "apb_pclk";
+        #clock-cells = <1>;
+        clock-output-names = "timerclken0", "timerclken1",
+                             "timerclken2", "timerclken3";
+        assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>,
+                          <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+        assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>,
+                                 <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
new file mode 100644
index 0000000000..e404e2556b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/spear-misc.txt
@@ -0,0 +1,9 @@
+SPEAr Misc configuration
+===========================
+SPEAr SOCs have some miscellaneous registers which are used to configure
+few properties of different peripheral controllers.
+
+misc node required properties:
+
+- compatible Should be	"st,spear1340-misc", "syscon".
+- reg: Address range of misc space up to 8K
diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml
new file mode 100644
index 0000000000..a465c9eca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/spear.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/spear.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST SPEAr Platforms
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Stefan Roese <sr@denx.de>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - st,spear600
+          - st,spear300
+          - st,spear310
+          - st,spear320
+          - st,spear1310
+          - st,spear1340
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
new file mode 100644
index 0000000000..eaa67b8e0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc platforms
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sprd,sc9836-openphone
+          - const: sprd,sc9836
+      - items:
+          - enum:
+              - sprd,sp9860g-1h10
+          - const: sprd,sc9860
+      - items:
+          - enum:
+              - sprd,sp9863a-1h10
+          - const: sprd,sc9863a
+
+      - items:
+          - enum:
+              - sprd,ums512-1h10
+          - const: sprd,ums512
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ste-nomadik.txt b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
new file mode 100644
index 0000000000..2fdff5a806
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ste-nomadik.txt
@@ -0,0 +1,38 @@
+ST-Ericsson Nomadik Device Tree Bindings
+
+For various board the "board" node may contain specific properties
+that pertain to this particular board, such as board-specific GPIOs.
+
+Required root node property: src
+- Nomadik System and reset controller used for basic chip control, clock
+  and reset line control.
+- compatible: must be "stericsson,nomadik,src"
+
+Boards with the Nomadik SoC include:
+
+Nomadik NHK-15 board manufactured by ST Microelectronics:
+
+Required root node property:
+
+compatible="st,nomadik-nhk-15";
+
+S8815 "MiniKit" manufactured by Calao Systems:
+
+Required root node property:
+
+compatible="calaosystems,usb-s8815";
+
+Required node: usb-s8815
+
+Example:
+
+usb-s8815 {
+		ethernet-gpio {
+			gpios = <&gpio3 19 0x1>;
+			interrupts = <19 0x1>;
+			interrupt-parent = <&gpio3>;
+		};
+		mmcsd-gpio {
+			gpios = <&gpio3 16 0x1>;
+		};
+};
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
new file mode 100644
index 0000000000..3ca054c643
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST STi Platforms
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - st,stih415
+          - st,stih416
+          - st,stih407
+          - st,stih410
+          - st,stih418
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
new file mode 100644
index 0000000000..d2dce238ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 ML-AHB interconnect
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+
+description: |
+  These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
+  a Cortex-M subsystem with dedicated memories. The MCU SRAM and RETRAM memory
+  parts can be accessed through different addresses (see "RAM aliases" in [1])
+  using different buses (see [2]): balancing the Cortex-M firmware accesses
+  among those ports allows to tune the system performance.
+  [1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf
+  [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - st,mlahb
+
+  dma-ranges:
+    description: |
+      Describe memory addresses translation between the local CPU and the
+      remote Cortex-M processor. Each memory region, is declared with
+      3 parameters:
+      - param 1: device base address (Cortex-M processor address)
+      - param 2: physical base address (local CPU address)
+      - param 3: size of the memory region.
+    maxItems: 3
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - dma-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mlahb: ahb@38000000 {
+      compatible = "st,mlahb", "simple-bus";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      reg = <0x10000000 0x40000>;
+      ranges;
+      dma-ranges = <0x00000000 0x38000000 0x10000>,
+                   <0x10000000 0x10000000 0x60000>,
+                   <0x30000000 0x30000000 0x60000>;
+
+      m4_rproc: m4@10000000 {
+       reg = <0x10000000 0x40000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
new file mode 100644
index 0000000000..d083d8ad48
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Platforms System Controller
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32-power-config
+              - st,stm32-syscfg
+              - st,stm32-tamp
+              - st,stm32f4-gcan
+              - st,stm32mp151-pwr-mcu
+              - st,stm32mp157-syscfg
+              - st,stm32mp25-syscfg
+          - const: syscon
+      - items:
+          - const: st,stm32-tamp
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp157-syscfg
+          - st,stm32f4-gcan
+then:
+  required:
+    - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    syscfg: syscon@50020000 {
+        compatible = "st,stm32mp157-syscfg", "syscon";
+        reg = <0x50020000 0x400>;
+        clocks = <&rcc SYSCFG>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
new file mode 100644
index 0000000000..4bf28e717a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Platforms
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: emtrion STM32MP1 Argon based Boards
+        items:
+          - const: emtrion,stm32mp157c-emsbc-argon
+          - const: emtrion,stm32mp157c-emstamp-argon
+          - const: st,stm32mp157
+      - items:
+          - enum:
+              - st,stm32f429i-disco
+              - st,stm32429i-eval
+          - const: st,stm32f429
+      - items:
+          - enum:
+              - st,stm32f469i-disco
+          - const: st,stm32f469
+      - items:
+          - enum:
+              - st,stm32f746-disco
+              - st,stm32746g-eval
+          - const: st,stm32f746
+      - items:
+          - enum:
+              - st,stm32f769-disco
+          - const: st,stm32f769
+      - items:
+          - enum:
+              - st,stm32h743i-disco
+              - st,stm32h743i-eval
+          - const: st,stm32h743
+      - items:
+          - enum:
+              - st,stm32h750i-art-pi
+          - const: st,stm32h750
+      - items:
+          - enum:
+              - st,stm32mp135f-dk
+          - const: st,stm32mp135
+
+      - description: ST STM32MP151 based Boards
+        items:
+          - enum:
+              - prt,prtt1a   # Protonic PRTT1A
+              - prt,prtt1c   # Protonic PRTT1C
+              - prt,prtt1s   # Protonic PRTT1S
+          - const: st,stm32mp151
+
+      - description: DH STM32MP151 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp151a-dhcor-testbench
+          - const: dh,stm32mp151a-dhcor-som
+          - const: st,stm32mp151
+
+      - description: DH STM32MP153 DHCOM SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcom-drc02
+          - const: dh,stm32mp153c-dhcom-som
+          - const: st,stm32mp153
+
+      - description: DH STM32MP153 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcor-drc-compact
+          - const: dh,stm32mp153c-dhcor-som
+          - const: st,stm32mp153
+
+      - items:
+          - enum:
+              - shiratech,stm32mp157a-iot-box # IoT Box
+              - shiratech,stm32mp157a-stinger96 # Stinger96
+              - st,stm32mp157c-ed1
+              - st,stm32mp157a-dk1
+              - st,stm32mp157c-dk2
+          - const: st,stm32mp157
+
+      - items:
+          - const: st,stm32mp157a-dk1-scmi
+          - const: st,stm32mp157a-dk1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-dk2-scmi
+          - const: st,stm32mp157c-dk2
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ed1-scmi
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1-scmi
+          - const: st,stm32mp157c-ev1
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - arrow,stm32mp157a-avenger96 # Avenger96
+          - const: dh,stm32mp157a-dhcor-som
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - dh,stm32mp157c-dhcom-pdk2
+              - dh,stm32mp157c-dhcom-picoitx
+          - const: dh,stm32mp157c-dhcom-som
+          - const: st,stm32mp157
+
+      - description: Engicam i.Core STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
+              - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
+          - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
+          - const: st,stm32mp157
+
+      - description: Engicam MicroGEA STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - engicam,microgea-stm32mp1-microdev2.0
+              - engicam,microgea-stm32mp1-microdev2.0-of7
+          - const: engicam,microgea-stm32mp1
+          - const: st,stm32mp157
+
+      - description: Octavo OSD32MP15x System-in-Package based boards
+        items:
+          - enum:
+              - lxa,stm32mp157c-mc1      # Linux Automation MC-1
+              - lxa,stm32mp157c-tac-gen1 # Linux Automation TAC (Generation 1)
+              - lxa,stm32mp157c-tac-gen2 # Linux Automation TAC (Generation 2)
+          - const: oct,stm32mp15xx-osd32
+          - enum:
+              - st,stm32mp157
+
+      - description: Odyssey STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - seeed,stm32mp157c-odyssey
+          - const: seeed,stm32mp157c-odyssey-som
+          - const: st,stm32mp157
+
+      - description: Phytec STM32MP1 SoM based Boards
+        items:
+          - const: phytec,phycore-stm32mp1-3
+          - const: phytec,phycore-stm32mp157c-som
+          - const: st,stm32mp157
+
+      - description: ST STM32MP257 based Boards
+        items:
+          - enum:
+              - st,stm32mp257f-ev1
+          - const: st,stm32mp257
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
new file mode 100644
index 0000000000..def7d0cfeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+  - qinjian <qinjian@cqplus1.com>
+
+description: |
+  ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+  Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sunplus,sp7021-achip
+          - sunplus,sp7021-demo-v3
+      - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
new file mode 100644
index 0000000000..e4dd678f42
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -0,0 +1,1005 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner platforms
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Allwinner A100 Perf1 Board
+        items:
+          - const: allwinner,a100-perf1
+          - const: allwinner,sun50i-a100
+
+      - description: Allwinner A23 Evaluation Board
+        items:
+          - const: allwinner,sun8i-a23-evb
+          - const: allwinner,sun8i-a23
+
+      - description: Allwinner A31 APP4 Evaluation Board
+        items:
+          - const: allwinner,app4-evb1
+          - const: allwinner,sun6i-a31
+
+      - description: Allwinner A83t Homlet Evaluation Board v2
+        items:
+          - const: allwinner,h8homlet-v2
+          - const: allwinner,sun8i-a83t
+
+      - description: Allwinner GA10H Quad Core Tablet v1.1
+        items:
+          - const: allwinner,ga10h-v1.1
+          - const: allwinner,sun8i-a33
+
+      - description: Allwinner GT90H Tablet v4
+        items:
+          - const: allwinner,gt90h-v4
+          - const: allwinner,sun8i-a23
+
+      - description: Allwinner R16 EVB (Parrot)
+        items:
+          - const: allwinner,parrot
+          - const: allwinner,sun8i-a33
+
+      - description: Amarula A64 Relic
+        items:
+          - const: amarula,a64-relic
+          - const: allwinner,sun50i-a64
+
+      - description: Auxtek T003 A10s HDMI TV Stick
+        items:
+          - const: allwinner,auxtek-t003
+          - const: allwinner,sun5i-a10s
+
+      - description: Auxtek T004 A10s HDMI TV Stick
+        items:
+          - const: allwinner,auxtek-t004
+          - const: allwinner,sun5i-a10s
+
+      - description: BA10 TV Box
+        items:
+          - const: allwinner,ba10-tvbox
+          - const: allwinner,sun4i-a10
+
+      - description: BananaPi
+        items:
+          - const: lemaker,bananapi
+          - const: allwinner,sun7i-a20
+
+      - description: BananaPi M1 Plus
+        items:
+          - const: sinovoip,bpi-m1-plus
+          - const: allwinner,sun7i-a20
+
+      - description: BananaPi M2
+        items:
+          - const: sinovoip,bpi-m2
+          - const: allwinner,sun6i-a31s
+
+      - description: BananaPi M2 Berry
+        items:
+          - const: sinovoip,bpi-m2-berry
+          - const: allwinner,sun8i-r40
+
+      - description: BananaPi M2 Plus
+        items:
+          - const: sinovoip,bpi-m2-plus
+          - const: allwinner,sun8i-h3
+
+      - description: BananaPi M2 Plus
+        items:
+          - const: sinovoip,bpi-m2-plus
+          - const: allwinner,sun50i-h5
+
+      - description: BananaPi M2 Plus v1.2
+        items:
+          - const: bananapi,bpi-m2-plus-v1.2
+          - const: allwinner,sun8i-h3
+
+      - description: BananaPi M2 Plus v1.2
+        items:
+          - const: bananapi,bpi-m2-plus-v1.2
+          - const: allwinner,sun50i-h5
+
+      - description: BananaPi M2 Magic
+        items:
+          - const: sinovoip,bananapi-m2m
+          - const: allwinner,sun8i-a33
+
+      - description: BananaPi M2 Ultra
+        items:
+          - const: sinovoip,bpi-m2-ultra
+          - const: allwinner,sun8i-r40
+
+      - description: BananaPi M2 Zero
+        items:
+          - const: sinovoip,bpi-m2-zero
+          - const: allwinner,sun8i-h2-plus
+
+      - description: BananaPi M3
+        items:
+          - const: sinovoip,bpi-m3
+          - const: allwinner,sun8i-a83t
+
+      - description: BananaPi M64
+        items:
+          - const: sinovoip,bananapi-m64
+          - const: allwinner,sun50i-a64
+
+      - description: BananaPro
+        items:
+          - const: lemaker,bananapro
+          - const: allwinner,sun7i-a20
+
+      - description: Beelink GS1
+        items:
+          - const: azw,beelink-gs1
+          - const: allwinner,sun50i-h6
+
+      - description: Beelink X2
+        items:
+          - const: roofull,beelink-x2
+          - const: allwinner,sun8i-h3
+
+      - description: Chuwi V7 CW0825
+        items:
+          - const: chuwi,v7-cw0825
+          - const: allwinner,sun4i-a10
+
+      - description: Colorfly E708 Q1 Tablet
+        items:
+          - const: colorfly,e708-q1
+          - const: allwinner,sun6i-a31s
+
+      - description: CSQ CS908 Set Top Box
+        items:
+          - const: csq,cs908
+          - const: allwinner,sun6i-a31s
+
+      - description: Cubietech Cubieboard
+        items:
+          - const: cubietech,a10-cubieboard
+          - const: allwinner,sun4i-a10
+
+      - description: Cubietech Cubieboard2
+        items:
+          - const: cubietech,cubieboard2
+          - const: allwinner,sun7i-a20
+
+      - description: Cubietech Cubieboard4
+        items:
+          - const: cubietech,a80-cubieboard4
+          - const: allwinner,sun9i-a80
+
+      - description: Cubietech Cubietruck
+        items:
+          - const: cubietech,cubietruck
+          - const: allwinner,sun7i-a20
+
+      - description: Cubietech Cubietruck Plus
+        items:
+          - const: cubietech,cubietruck-plus
+          - const: allwinner,sun8i-a83t
+
+      - description: Difrnce DIT4350
+        items:
+          - const: difrnce,dit4350
+          - const: allwinner,sun5i-a13
+
+      - description: Dserve DSRV9703C
+        items:
+          - const: dserve,dsrv9703c
+          - const: allwinner,sun4i-a10
+
+      - description: Elimo Engineering Impetus SoM
+        items:
+          - const: elimo,impetus
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
+      - description: Elimo Engineering Initium
+        items:
+          - const: elimo,initium
+          - const: elimo,impetus
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
+      - description: Empire Electronix D709 Tablet
+        items:
+          - const: empire-electronix,d709
+          - const: allwinner,sun5i-a13
+
+      - description: Empire Electronix M712 Tablet
+        items:
+          - const: empire-electronix,m712
+          - const: allwinner,sun5i-a13
+
+      - description: Forlinx OKA40i-C Development board
+        items:
+          - const: forlinx,oka40i-c
+          - const: forlinx,feta40i-c
+          - const: allwinner,sun8i-r40
+
+      - description: FriendlyARM NanoPi A64
+        items:
+          - const: friendlyarm,nanopi-a64
+          - const: allwinner,sun50i-a64
+
+      - description: FriendlyARM NanoPi Duo2
+        items:
+          - const: friendlyarm,nanopi-duo2
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi M1
+        items:
+          - const: friendlyarm,nanopi-m1
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi M1 Plus
+        items:
+          - const: friendlyarm,nanopi-m1-plus
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi Neo
+        items:
+          - const: friendlyarm,nanopi-neo
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi Neo 2
+        items:
+          - const: friendlyarm,nanopi-neo2
+          - const: allwinner,sun50i-h5
+
+      - description: FriendlyARM NanoPi Neo Air
+        items:
+          - const: friendlyarm,nanopi-neo-air
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi Neo Plus2
+        items:
+          - const: friendlyarm,nanopi-neo-plus2
+          - const: allwinner,sun50i-h5
+
+      - description: FriendlyARM NanoPi R1
+        items:
+          - const: friendlyarm,nanopi-r1
+          - const: allwinner,sun8i-h3
+
+      - description: FriendlyARM NanoPi R1S H5
+        items:
+          - const: friendlyarm,nanopi-r1s-h5
+          - const: allwinner,sun50i-h5
+
+      - description: FriendlyARM ZeroPi
+        items:
+          - const: friendlyarm,zeropi
+          - const: allwinner,sun8i-h3
+
+      - description: Gemei G9 Tablet
+        items:
+          - const: gemei,g9
+          - const: allwinner,sun4i-a10
+
+      - description: Hyundai A7HD
+        items:
+          - const: hyundai,a7hd
+          - const: allwinner,sun4i-a10
+
+      - description: HSG H702
+        items:
+          - const: hsg,h702
+          - const: allwinner,sun5i-a13
+
+      - description: I12 TV Box
+        items:
+          - const: allwinner,i12-tvbox
+          - const: allwinner,sun7i-a20
+
+      - description: ICnova A20 ADB4006
+        items:
+          - const: incircuit,icnova-a20-adb4006
+          - const: incircuit,icnova-a20
+          - const: allwinner,sun7i-a20
+
+      - description: ICNova A20 SWAC
+        items:
+          - const: incircuit,icnova-a20-swac
+          - const: incircuit,icnova-a20
+          - const: allwinner,sun7i-a20
+
+      - description: INet-1
+        items:
+          - const: inet-tek,inet1
+          - const: allwinner,sun4i-a10
+
+      - description: iNet-86DZ Rev 01
+        items:
+          - const: primux,inet86dz
+          - const: allwinner,sun8i-a23
+
+      - description: iNet-9F Rev 03
+        items:
+          - const: inet-tek,inet9f-rev03
+          - const: allwinner,sun4i-a10
+
+      - description: iNet-97F Rev 02
+        items:
+          - const: primux,inet97fv2
+          - const: allwinner,sun4i-a10
+
+      - description: iNet-98V Rev 02
+        items:
+          - const: primux,inet98v-rev2
+          - const: allwinner,sun5i-a13
+
+      - description: iNet D978 Rev 02 Tablet
+        items:
+          - const: primux,inet-d978-rev2
+          - const: allwinner,sun8i-a33
+
+      - description: iNet Q972 Tablet
+        items:
+          - const: inet-tek,inet-q972
+          - const: allwinner,sun6i-a31s
+
+      - description: Itead Ibox A20
+        items:
+          - const: itead,itead-ibox-a20
+          - const: allwinner,sun7i-a20
+
+      - description: Itead Iteaduino Plus A10
+        items:
+          - const: itead,iteaduino-plus-a10
+          - const: allwinner,sun4i-a10
+
+      - description: Jesurun Q5
+        items:
+          - const: jesurun,q5
+          - const: allwinner,sun4i-a10
+
+      - description: Lamobo R1
+        items:
+          - const: lamobo,lamobo-r1
+          - const: allwinner,sun7i-a20
+
+      - description: Lctech Pi F1C200s
+        items:
+          - const: lctech,pi-f1c200s
+          - const: allwinner,suniv-f1c200s
+          - const: allwinner,suniv-f1c100s
+
+      - description: Libre Computer Board ALL-H3-CC H2+
+        items:
+          - const: libretech,all-h3-cc-h2-plus
+          - const: allwinner,sun8i-h2-plus
+
+      - description: Libre Computer Board ALL-H3-CC H3
+        items:
+          - const: libretech,all-h3-cc-h3
+          - const: allwinner,sun8i-h3
+
+      - description: Libre Computer Board ALL-H3-CC H5
+        items:
+          - const: libretech,all-h3-cc-h5
+          - const: allwinner,sun50i-h5
+
+      - description: Libre Computer Board ALL-H3-IT H5
+        items:
+          - const: libretech,all-h3-it-h5
+          - const: allwinner,sun50i-h5
+
+      - description: Libre Computer Board ALL-H5-CC H5
+        items:
+          - const: libretech,all-h5-cc-h5
+          - const: allwinner,sun50i-h5
+
+      - description: Lichee Pi Nano
+        items:
+          - const: licheepi,licheepi-nano
+          - const: allwinner,suniv-f1c100s
+
+      - description: Lichee Pi One
+        items:
+          - const: licheepi,licheepi-one
+          - const: allwinner,sun5i-a13
+
+      - description: Lichee Pi Zero
+        items:
+          - const: licheepi,licheepi-zero
+          - const: allwinner,sun8i-v3s
+
+      - description: Lichee Pi Zero (with Dock)
+        items:
+          - const: licheepi,licheepi-zero-dock
+          - const: licheepi,licheepi-zero
+          - const: allwinner,sun8i-v3s
+
+      - description: Lichee Zero Plus (with S3, without eMMC/SPI Flash)
+        items:
+          - const: sipeed,lichee-zero-plus
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
+      - description: Linksprite PCDuino
+        items:
+          - const: linksprite,a10-pcduino
+          - const: allwinner,sun4i-a10
+
+      - description: Linksprite PCDuino2
+        items:
+          - const: linksprite,a10-pcduino2
+          - const: allwinner,sun4i-a10
+
+      - description: Linksprite PCDuino3
+        items:
+          - const: linksprite,pcduino3
+          - const: allwinner,sun7i-a20
+
+      - description: Linksprite PCDuino3 Nano
+        items:
+          - const: linksprite,pcduino3-nano
+          - const: allwinner,sun7i-a20
+
+      - description: Linutronix Testbox v2
+        items:
+          - const: linutronix,testbox-v2
+          - const: lamobo,lamobo-r1
+          - const: allwinner,sun7i-a20
+
+      - description: HAOYU Electronics Marsboard A10
+        items:
+          - const: haoyu,a10-marsboard
+          - const: allwinner,sun4i-a10
+
+      - description: HAOYU Electronics Marsboard A20
+        items:
+          - const: haoyu,a20-marsboard
+          - const: allwinner,sun7i-a20
+
+      - description: MapleBoard MP130
+        items:
+          - const: mapleboard,mp130
+          - const: allwinner,sun8i-h3
+
+      - description: Mele A1000
+        items:
+          - const: mele,a1000
+          - const: allwinner,sun4i-a10
+
+      - description: Mele A1000G Quad Set Top Box
+        items:
+          - const: mele,a1000g-quad
+          - const: allwinner,sun6i-a31
+
+      - description: Mele I7 Quad Set Top Box
+        items:
+          - const: mele,i7
+          - const: allwinner,sun6i-a31
+
+      - description: Mele M3
+        items:
+          - const: mele,m3
+          - const: allwinner,sun7i-a20
+
+      - description: Mele M9 Set Top Box
+        items:
+          - const: mele,m9
+          - const: allwinner,sun6i-a31
+
+      - description: Merrii A20 Hummingboard
+        items:
+          - const: merrii,a20-hummingbird
+          - const: allwinner,sun7i-a20
+
+      - description: Merrii A31 Hummingboard
+        items:
+          - const: merrii,a31-hummingbird
+          - const: allwinner,sun6i-a31
+
+      - description: Merrii A80 Optimus
+        items:
+          - const: merrii,a80-optimus
+          - const: allwinner,sun9i-a80
+
+      - description: Miniand Hackberry
+        items:
+          - const: miniand,hackberry
+          - const: allwinner,sun4i-a10
+
+      - description: MK802
+        items:
+          - const: allwinner,mk802
+          - const: allwinner,sun4i-a10
+
+      - description: MK802-A10s
+        items:
+          - const: allwinner,a10s-mk802
+          - const: allwinner,sun5i-a10s
+
+      - description: MK802-II
+        items:
+          - const: allwinner,mk802ii
+          - const: allwinner,sun4i-a10
+
+      - description: MK808c
+        items:
+          - const: allwinner,mk808c
+          - const: allwinner,sun7i-a20
+
+      - description: MSI Primo81 Tablet
+        items:
+          - const: msi,primo81
+          - const: allwinner,sun6i-a31s
+
+      - description: Emlid Neutis N5 Developer Board
+        items:
+          - const: emlid,neutis-n5-devboard
+          - const: emlid,neutis-n5
+          - const: allwinner,sun50i-h5
+
+      - description: Emlid Neutis N5H3 Developer Board
+        items:
+          - const: emlid,neutis-n5h3-devboard
+          - const: emlid,neutis-n5h3
+          - const: allwinner,sun8i-h3
+
+      - description: NextThing Co. CHIP
+        items:
+          - const: nextthing,chip
+          - const: allwinner,sun5i-r8
+          - const: allwinner,sun5i-a13
+
+      - description: NextThing Co. CHIP Pro
+        items:
+          - const: nextthing,chip-pro
+          - const: nextthing,gr8
+
+      - description: NextThing Co. GR8 Evaluation Board
+        items:
+          - const: nextthing,gr8-evb
+          - const: nextthing,gr8
+
+      - description: Nintendo NES Classic
+        items:
+          - const: nintendo,nes-classic
+          - const: allwinner,sun8i-r16
+          - const: allwinner,sun8i-a33
+
+      - description: Nintendo Super NES Classic
+        items:
+          - const: nintendo,super-nes-classic
+          - const: nintendo,nes-classic
+          - const: allwinner,sun8i-r16
+          - const: allwinner,sun8i-a33
+
+      - description: Oceanic 5inMFD (5205)
+        items:
+          - const: oceanic,5205-5inmfd
+          - const: allwinner,sun50i-a64
+
+      - description: Olimex A10-OlinuXino LIME
+        items:
+          - const: olimex,a10-olinuxino-lime
+          - const: allwinner,sun4i-a10
+
+      - description: Olimex A10s-OlinuXino Micro
+        items:
+          - const: olimex,a10s-olinuxino-micro
+          - const: allwinner,sun5i-a10s
+
+      - description: Olimex A13-OlinuXino
+        items:
+          - const: olimex,a13-olinuxino
+          - const: allwinner,sun5i-a13
+
+      - description: Olimex A13-OlinuXino Micro
+        items:
+          - const: olimex,a13-olinuxino-micro
+          - const: allwinner,sun5i-a13
+
+      - description: Olimex A20-Olimex SOM Evaluation Board
+        items:
+          - const: olimex,a20-olimex-som-evb
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-Olimex SOM Evaluation Board (with eMMC)
+        items:
+          - const: olimex,a20-olimex-som-evb-emmc
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-OlinuXino LIME
+        items:
+          - const: olimex,a20-olinuxino-lime
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-OlinuXino LIME (with eMMC)
+        items:
+          - const: olimex,a20-olinuxino-lime-emmc
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-OlinuXino LIME2
+        items:
+          - const: olimex,a20-olinuxino-lime2
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-OlinuXino LIME2 (with eMMC)
+        items:
+          - const: olimex,a20-olinuxino-lime2-emmc
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-OlinuXino Micro
+        items:
+          - const: olimex,a20-olinuxino-micro
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-OlinuXino Micro (with eMMC)
+        items:
+          - const: olimex,a20-olinuxino-micro-emmc
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-SOM204 Evaluation Board
+        items:
+          - const: olimex,a20-olimex-som204-evb
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A20-SOM204 Evaluation Board (with eMMC)
+        items:
+          - const: olimex,a20-olimex-som204-evb-emmc
+          - const: allwinner,sun7i-a20
+
+      - description: Olimex A33-OlinuXino
+        items:
+          - const: olimex,a33-olinuxino
+          - const: allwinner,sun8i-a33
+
+      - description: Olimex A64-OlinuXino
+        items:
+          - const: olimex,a64-olinuxino
+          - const: allwinner,sun50i-a64
+
+      - description: Olimex A64-OlinuXino (with eMMC)
+        items:
+          - const: olimex,a64-olinuxino-emmc
+          - const: allwinner,sun50i-a64
+
+      - description: Olimex A64 Teres-I
+        items:
+          - const: olimex,a64-teres-i
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64
+        items:
+          - const: pine64,pine64
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64+
+        items:
+          - const: pine64,pine64-plus
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineCube
+        items:
+          - const: pine64,pinecube
+          - const: sochip,s3
+          - const: allwinner,sun8i-v3
+
+      - description: Pine64 PineH64 model A
+        items:
+          - const: pine64,pine-h64
+          - const: allwinner,sun50i-h6
+
+      - description: Pine64 PineH64 model B
+        items:
+          - const: pine64,pine-h64-model-b
+          - const: allwinner,sun50i-h6
+
+      - description: Pine64 LTS
+        items:
+          - const: pine64,pine64-lts
+          - const: allwinner,sun50i-r18
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 Pinebook
+        items:
+          - const: pine64,pinebook
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone Developer Batch (1.0)
+        items:
+          - const: pine64,pinephone-1.0
+          - const: pine64,pinephone
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone Braveheart (1.1)
+        items:
+          - const: pine64,pinephone-1.1
+          - const: pine64,pinephone
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PinePhone (1.2)
+        items:
+          - const: pine64,pinephone-1.2
+          - const: pine64,pinephone
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineTab, Development Sample
+        items:
+          - const: pine64,pinetab
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
+        items:
+          - const: pine64,pinetab-early-adopter
+          - const: allwinner,sun50i-a64
+
+      - description: Pine64 SoPine Baseboard
+        items:
+          - const: pine64,sopine-baseboard
+          - const: pine64,sopine
+          - const: allwinner,sun50i-a64
+
+      - description: PineRiver Mini X-Plus
+        items:
+          - const: pineriver,mini-xplus
+          - const: allwinner,sun4i-a10
+
+      - description: PocketBook Touch Lux 3
+        items:
+          - const: pocketbook,touch-lux-3
+          - const: allwinner,sun5i-a13
+
+      - description: Point of View Protab2-IPS9
+        items:
+          - const: pov,protab2-ips9
+          - const: allwinner,sun4i-a10
+
+      - description: Polaroid MID2407PXE03 Tablet
+        items:
+          - const: polaroid,mid2407pxe03
+          - const: allwinner,sun8i-a23
+
+      - description: Polaroid MID2809PXE04 Tablet
+        items:
+          - const: polaroid,mid2809pxe04
+          - const: allwinner,sun8i-a23
+
+      - description: Q8 A13 Tablet
+        items:
+          - const: allwinner,q8-a13
+          - const: allwinner,sun5i-a13
+
+      - description: Q8 A23 Tablet
+        items:
+          - const: allwinner,q8-a23
+          - const: allwinner,sun8i-a23
+
+      - description: Q8 A33 Tablet
+        items:
+          - const: allwinner,q8-a33
+          - const: allwinner,sun8i-a33
+
+      - description: Qihua CQA3T BV3
+        items:
+          - const: qihua,t3-cqa3t-bv3
+          - const: allwinner,sun8i-t3
+          - const: allwinner,sun8i-r40
+
+      - description: R7 A10s HDMI TV Stick
+        items:
+          - const: allwinner,r7-tv-dongle
+          - const: allwinner,sun5i-a10s
+
+      - description: RerVision H3-DVK
+        items:
+          - const: rervision,h3-dvk
+          - const: allwinner,sun8i-h3
+
+      - description: Sinlinx SinA31s Core Board
+        items:
+          - const: sinlinx,sina31s
+          - const: allwinner,sun6i-a31s
+
+      - description: Sinlinx SinA31s Development Board
+        items:
+          - const: sinlinx,sina31s-sdk
+          - const: allwinner,sun6i-a31s
+
+      - description: Sinlinx SinA33
+        items:
+          - const: sinlinx,sina33
+          - const: allwinner,sun8i-a33
+
+      - description: SourceParts PopStick v1.1
+        items:
+          - const: sourceparts,popstick-v1.1
+          - const: sourceparts,popstick
+          - const: allwinner,suniv-f1c200s
+          - const: allwinner,suniv-f1c100s
+
+      - description: SL631 Action Camera with IMX179
+        items:
+          - const: allwinner,sl631-imx179
+          - const: allwinner,sl631
+          - const: allwinner,sun8i-v3
+
+      - description: Tanix TX6
+        items:
+          - const: oranth,tanix-tx6
+          - const: allwinner,sun50i-h6
+
+      - description: Tanix TX6 mini
+        items:
+          - const: oranth,tanix-tx6-mini
+          - const: allwinner,sun50i-h6
+
+      - description: TBS A711 Tablet
+        items:
+          - const: tbs-biometrics,a711
+          - const: allwinner,sun8i-a83t
+
+      - description: Topwise A721 Tablet
+        items:
+          - const: topwise,a721
+          - const: allwinner,sun4i-a10
+
+      - description: Utoo P66
+        items:
+          - const: utoo,p66
+          - const: allwinner,sun5i-a13
+
+      - description: Wexler TAB7200
+        items:
+          - const: wexler,tab7200
+          - const: allwinner,sun7i-a20
+
+      - description: MangoPi MQ-R board
+        items:
+          - const: widora,mangopi-mq-r-t113
+          - const: allwinner,sun8i-t113s
+
+      - description: WITS A31 Colombus Evaluation Board
+        items:
+          - const: wits,colombus
+          - const: allwinner,sun6i-a31
+
+      - description: WITS Pro A20 DKT
+        items:
+          - const: wits,pro-a20-dkt
+          - const: allwinner,sun7i-a20
+
+      - description: Wobo i5
+        items:
+          - const: wobo,a10s-wobo-i5
+          - const: allwinner,sun5i-a10s
+
+      - description: Yones TopTech BS1078 v2 Tablet
+        items:
+          - const: yones-toptech,bs1078-v2
+          - const: allwinner,sun6i-a31s
+
+      - description: X96 Mate TV box
+        items:
+          - const: hechuang,x96-mate
+          - const: allwinner,sun50i-h616
+
+      - description: Xunlong OrangePi
+        items:
+          - const: xunlong,orangepi
+          - const: allwinner,sun7i-a20
+
+      - description: Xunlong OrangePi 2
+        items:
+          - const: xunlong,orangepi-2
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi 3
+        items:
+          - const: xunlong,orangepi-3
+          - const: allwinner,sun50i-h6
+
+      - description: Xunlong OrangePi Lite
+        items:
+          - const: xunlong,orangepi-lite
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi Lite2
+        items:
+          - const: xunlong,orangepi-lite2
+          - const: allwinner,sun50i-h6
+
+      - description: Xunlong OrangePi Mini
+        items:
+          - const: xunlong,orangepi-mini
+          - const: allwinner,sun7i-a20
+
+      - description: Xunlong OrangePi One
+        items:
+          - const: xunlong,orangepi-one
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi One Plus
+        items:
+          - const: xunlong,orangepi-one-plus
+          - const: allwinner,sun50i-h6
+
+      - description: Xunlong OrangePi PC
+        items:
+          - const: xunlong,orangepi-pc
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi PC 2
+        items:
+          - const: xunlong,orangepi-pc2
+          - const: allwinner,sun50i-h5
+
+      - description: Xunlong OrangePi PC Plus
+        items:
+          - const: xunlong,orangepi-pc-plus
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi Plus
+        items:
+          - const: xunlong,orangepi-plus
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi Plus 2E
+        items:
+          - const: xunlong,orangepi-plus2e
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi Prime
+        items:
+          - const: xunlong,orangepi-prime
+          - const: allwinner,sun50i-h5
+
+      - description: Xunlong OrangePi R1
+        items:
+          - const: xunlong,orangepi-r1
+          - const: allwinner,sun8i-h2-plus
+
+      - description: Xunlong OrangePi Win
+        items:
+          - const: xunlong,orangepi-win
+          - const: allwinner,sun50i-a64
+
+      - description: Xunlong OrangePi Zero
+        items:
+          - const: xunlong,orangepi-zero
+          - const: allwinner,sun8i-h2-plus
+
+      - description: Xunlong OrangePi Zero Plus
+        items:
+          - const: xunlong,orangepi-zero-plus
+          - const: allwinner,sun50i-h5
+
+      - description: Xunlong OrangePi Zero Plus2
+        items:
+          - const: xunlong,orangepi-zero-plus2
+          - const: allwinner,sun50i-h5
+
+      - description: Xunlong OrangePi Zero Plus2
+        items:
+          - const: xunlong,orangepi-zero-plus2-h3
+          - const: allwinner,sun8i-h3
+
+      - description: Xunlong OrangePi Zero 2
+        items:
+          - const: xunlong,orangepi-zero2
+          - const: allwinner,sun50i-h616
+
+      - description: Xunlong OrangePi Zero 3
+        items:
+          - const: xunlong,orangepi-zero3
+          - const: allwinner,sun50i-h618
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
new file mode 100644
index 0000000000..99566688d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun4i-a10-mbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Memory Bus (MBUS) controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The MBUS controller drives the MBUS that other devices in the SoC
+  will use to perform DMA. It also has a register interface that
+  allows to monitor and control the bandwidth and priorities for
+  masters on that bus.
+
+  Each device having to perform their DMA through the MBUS must have
+  the interconnects and interconnect-names properties set to the MBUS
+  controller and with "dma-mem" as the interconnect name.
+
+properties:
+  "#interconnect-cells":
+    const: 1
+    description:
+      The content of the cell is the MBUS ID.
+
+  compatible:
+    enum:
+      - allwinner,sun5i-a13-mbus
+      - allwinner,sun8i-a33-mbus
+      - allwinner,sun8i-a50-mbus
+      - allwinner,sun8i-a83t-mbus
+      - allwinner,sun8i-h3-mbus
+      - allwinner,sun8i-r40-mbus
+      - allwinner,sun8i-v3s-mbus
+      - allwinner,sun8i-v536-mbus
+      - allwinner,sun20i-d1-mbus
+      - allwinner,sun50i-a64-mbus
+      - allwinner,sun50i-a100-mbus
+      - allwinner,sun50i-h5-mbus
+      - allwinner,sun50i-h6-mbus
+      - allwinner,sun50i-h616-mbus
+      - allwinner,sun50i-r329-mbus
+
+  reg:
+    minItems: 1
+    items:
+      - description: MBUS interconnect/bandwidth limit/PMU registers
+      - description: DRAM controller/PHY registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: MBUS interconnect module clock
+      - description: DRAM controller/PHY module clock
+      - description: Register bus clock, shared by MBUS and DRAM
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
+      - const: bus
+
+  interrupts:
+    maxItems: 1
+    description:
+      MBUS PMU activity interrupt.
+
+  dma-ranges:
+    description:
+      See section 2.3.9 of the DeviceTree Specification.
+
+  '#address-cells': true
+
+  '#size-cells': true
+
+required:
+  - "#interconnect-cells"
+  - compatible
+  - reg
+  - clocks
+  - dma-ranges
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun5i-a13-mbus
+            - allwinner,sun8i-r40-mbus
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 3
+
+    clock-names:
+      minItems: 3
+
+  required:
+    - reg-names
+    - clock-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dram-controller@1c01000 {
+        compatible = "allwinner,sun5i-a13-mbus";
+        reg = <0x01c01000 0x1000>;
+        clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dma-ranges = <0x00000000 0x40000000 0x20000000>;
+        #interconnect-cells = <1>;
+    };
+
+  - |
+    dram-controller@1c62000 {
+        compatible = "allwinner,sun50i-a64-mbus";
+        reg = <0x01c62000 0x1000>,
+              <0x01c63000 0x1000>;
+        reg-names = "mbus", "dram";
+        clocks = <&ccu CLK_MBUS>,
+                 <&ccu CLK_DRAM>,
+                 <&ccu CLK_BUS_DRAM>;
+        clock-names = "mbus", "dram", "bus";
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+        #interconnect-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
new file mode 100644
index 0000000000..d805c4508b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner CPU Configuration Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-cpuconfig
+      - allwinner,sun8i-a23-cpuconfig
+      - allwinner,sun8i-a83t-cpucfg
+      - allwinner,sun8i-a83t-r-cpucfg
+      - allwinner,sun9i-a80-cpucfg
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      cpucfg@1f01c00 {
+          compatible = "allwinner,sun6i-a31-cpuconfig";
+          reg = <0x01f01c00 0x300>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
new file mode 100644
index 0000000000..644f391afb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 PRCM
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun9i-a80-prcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      prcm@8001400 {
+          compatible = "allwinner,sun9i-a80-prcm";
+          reg = <0x08001400 0x200>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
new file mode 100644
index 0000000000..851f48ead9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -0,0 +1,101 @@
+Synaptics SoC Device Tree Bindings
+
+According to https://www.synaptics.com/company/news/conexant-marvell
+Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+berlin SoCs are now Synaptics' SoCs now.
+
+---------------------------------------------------------------
+
+Work in progress statement:
+
+Device tree files and bindings applying to Marvell Berlin SoCs and boards are
+considered "unstable". Any Marvell Berlin device tree binding may change at any
+time. Be sure to use a device tree binary and a kernel image generated from the
+same source tree.
+
+Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
+stable binding/ABI.
+
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
+shall have the following properties:
+
+* Required root node properties:
+compatible: must contain "marvell,berlin"
+
+In addition, the above compatible shall be extended with the specific
+SoC and board used. Currently known SoC compatibles are:
+    "marvell,berlin2"      for Marvell Armada 1500 (BG2, 88DE3100),
+    "marvell,berlin2cd"    for Marvell Armada 1500-mini (BG2CD, 88DE3005)
+    "marvell,berlin2ct"    for Marvell Armada ? (BG2CT, 88DE????)
+    "marvell,berlin2q"     for Marvell Armada 1500-pro (BG2Q, 88DE3114)
+    "marvell,berlin3"      for Marvell Armada ? (BG3, 88DE????)
+
+* Example:
+
+/ {
+	model = "Sony NSZ-GS7";
+	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
+
+	...
+}
+
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+	compatible = "marvell,berlin-cpu-ctrl";
+	reg = <0xf7dd0000 0x10000>;
+};
+
+* Marvell Berlin2 chip control binding
+
+Marvell Berlin SoCs have a chip control register set providing several
+individual registers dealing with pinmux, padmux, clock, reset, and secondary
+CPU boot address. Unfortunately, the individual registers are spread among the
+chip control registers, so there should be a single DT node only providing the
+different functions which are described below.
+
+Required properties:
+- compatible:
+	* the first and second values must be:
+		"simple-mfd", "syscon"
+- reg: address and length of following register sets for
+  BG2/BG2CD: chip control register set
+  BG2Q: chip control register set and cpu pll registers
+
+* Marvell Berlin2 system control binding
+
+Marvell Berlin SoCs have a system control register set providing several
+individual registers dealing with pinmux, padmux, and reset.
+
+Required properties:
+- compatible:
+	* the first and second values must be:
+		"simple-mfd", "syscon"
+- reg: address and length of the system control register set
+
+Example:
+
+chip: chip-control@ea0000 {
+	compatible = "simple-mfd", "syscon";
+	reg = <0xea0000 0x400>;
+
+	/* sub-device nodes */
+};
+
+sysctrl: system-controller@d000 {
+	compatible = "simple-mfd", "syscon";
+	reg = <0xd000 0x100>;
+
+	/* sub-device nodes */
+};
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
new file mode 100644
index 0000000000..fcf9564061
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - compal,paz00
+              - compulab,trimslice
+              - nvidia,harmony
+              - nvidia,seaboard
+              - nvidia,ventana
+          - const: nvidia,tegra20
+      - items:
+          - enum:
+              - ad,medcom-wide
+              - ad,plutux
+              - ad,tec
+          - const: ad,tamonten
+          - const: nvidia,tegra20
+      - items:
+          - enum:
+              - toradex,colibri_t20-eval-v3
+              - toradex,colibri_t20-iris
+          - const: toradex,colibri_t20
+          - const: nvidia,tegra20
+      - items:
+          - const: asus,tf101
+          - const: nvidia,tegra20
+      - items:
+          - const: acer,picasso
+          - const: nvidia,tegra20
+      - items:
+          - enum:
+              - nvidia,beaver
+          - const: nvidia,tegra30
+      - items:
+          - enum:
+              - nvidia,cardhu-a02
+              - nvidia,cardhu-a04
+          - const: nvidia,cardhu
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf201
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300t
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300tg
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf700t
+          - const: nvidia,tegra30
+      - items:
+          - const: toradex,apalis_t30-eval
+          - const: toradex,apalis_t30
+          - const: nvidia,tegra30
+      - items:
+          - const: toradex,apalis_t30-v1.1-eval
+          - const: toradex,apalis_t30-eval
+          - const: toradex,apalis_t30-v1.1
+          - const: toradex,apalis_t30
+          - const: nvidia,tegra30
+      - items:
+          - enum:
+              - toradex,colibri_t30-eval-v3
+          - const: toradex,colibri_t30
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,grouper
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tilapia
+          - const: asus,grouper
+          - const: nvidia,tegra30
+      - items:
+          - const: ouya,ouya
+          - const: nvidia,tegra30
+      - items:
+          - const: pegatron,chagall
+          - const: nvidia,tegra30
+      - items:
+          - enum:
+              - asus,tf701t
+              - nvidia,dalmore
+              - nvidia,roth
+              - nvidia,tn7
+          - const: nvidia,tegra114
+      - items:
+          - enum:
+              - nvidia,jetson-tk1
+              - nvidia,venice2
+          - const: nvidia,tegra124
+      - items:
+          - const: toradex,apalis-tk1-eval
+          - const: toradex,apalis-tk1
+          - const: nvidia,tegra124
+      - items:
+          - const: toradex,apalis-tk1-v1.2-eval
+          - const: toradex,apalis-tk1-eval
+          - const: toradex,apalis-tk1-v1.2
+          - const: toradex,apalis-tk1
+          - const: nvidia,tegra124
+      - items:
+          - enum:
+              - nvidia,norrin
+          - const: nvidia,tegra132
+          - const: nvidia,tegra124
+      - items:
+          - enum:
+              - nvidia,darcy
+              - nvidia,p2371-0000
+              - nvidia,p2371-2180
+              - nvidia,p2571
+              - nvidia,p2894-0050-a08
+          - const: nvidia,tegra210
+      - description: Jetson TX2 Developer Kit
+        items:
+          - const: nvidia,p2771-0000
+          - const: nvidia,tegra186
+      - description: Jetson TX2 NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3636-0001
+          - const: nvidia,tegra186
+      - description: Jetson AGX Xavier Developer Kit
+        items:
+          - const: nvidia,p2972-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX
+        items:
+          - const: nvidia,p3668-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX (eMMC)
+        items:
+          - const: nvidia,p3668-0001
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3668-0000
+          - const: nvidia,tegra194
+      - description: Jetson Xavier NX Developer Kit (eMMC)
+        items:
+          - const: nvidia,p3509-0000+p3668-0001
+          - const: nvidia,tegra194
+      - items:
+          - const: nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin
+        items:
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin Developer Kit
+        items:
+          - const: nvidia,p3737-0000+p3701-0000
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: NVIDIA IGX Orin Development Kit
+        items:
+          - const: nvidia,p3740-0002+p3701-0008
+          - const: nvidia,p3701-0008
+          - const: nvidia,tegra234
+      - description: Jetson Orin NX
+        items:
+          - const: nvidia,p3767-0000
+          - const: nvidia,tegra234
+      - description: Jetson Orin NX Engineering Reference Developer Kit
+        items:
+          - const: nvidia,p3768-0000+p3767-0000
+          - const: nvidia,p3767-0000
+          - const: nvidia,tegra234
+      - description: Jetson Orin Nano
+        items:
+          - const: nvidia,p3767-0005
+          - const: nvidia,tegra234
+      - description: Jetson Orin Nano Developer Kit
+        items:
+          - const: nvidia,p3768-0000+p3767-0005
+          - const: nvidia,p3767-0005
+          - const: nvidia,tegra234
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
new file mode 100644
index 0000000000..36dbd0838f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CPU COMPLEX CLUSTER area
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
+  registers that initiate CPU frequency/voltage transitions.
+
+properties:
+  $nodename:
+    pattern: "ccplex@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-ccplex-cluster
+      - nvidia,tegra234-ccplex-cluster
+
+  reg:
+    maxItems: 1
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the BPMP node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nvidia,bpmp
+
+examples:
+  - |
+    ccplex@e000000 {
+      compatible = "nvidia,tegra234-ccplex-cluster";
+      reg = <0x0e000000 0x5ffff>;
+      nvidia,bpmp = <&bpmp>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
new file mode 100644
index 0000000000..0faa403f68
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-pmc
+      - nvidia,tegra194-pmc
+      - nvidia,tegra234-pmc
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: pmc
+      - const: wake
+      - const: aotag
+      - const: scratch
+      - const: misc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: Specifies the number of cells needed to encode an
+      interrupt source. The value must be 2.
+    const: 2
+
+  nvidia,invert-interrupt:
+    description: If present, inverts the PMU interrupt signal.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: nvidia,tegra186-pmc
+then:
+  properties:
+    reg:
+      maxItems: 4
+
+    reg-names:
+      maxItems: 4
+else:
+  properties:
+    reg:
+      minItems: 5
+
+    reg-names:
+      minItems: 5
+
+patternProperties:
+  "^[a-z0-9]+-[a-z0-9]+$":
+    if:
+      type: object
+    then:
+      description: |
+        These are pad configuration nodes. On Tegra SoCs a pad is a set of
+        pins which are configured as a group. The pin grouping is a fixed
+        attribute of the hardware. The PMC can be used to set pad power
+        state and signaling voltage. A pad can be either in active or
+        power down mode. The support for power state and signaling voltage
+        configuration varies depending on the pad in question. 3.3 V and
+        1.8 V signaling voltages are supported on pins where software
+        controllable signaling voltage switching is available.
+
+        Pad configurations are described with pin configuration nodes
+        which are placed under the pmc node and they are referred to by
+        the pinctrl client properties. For more information see
+
+          Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+        The following pads are present on Tegra186:
+
+          csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib,
+          dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp,
+          sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv
+
+        The following pads are present on Tegra194:
+
+          csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart,
+          pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12,
+          soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst,
+          pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif,
+          spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn,
+          audio-hv, ao-hv
+
+      properties:
+        pins:
+          $ref: /schemas/types.yaml#/definitions/string
+          description: Must contain the name of the pad(s) to be
+            configured.
+
+        low-power-enable:
+          description: Configure the pad into power down mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        low-power-disable:
+          description: Configure the pad into active mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        power-source:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+            TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling
+            voltages.
+
+            The values are defined in
+
+              include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
+
+            The power state can be configured on all of the above pads
+            except for ao-hv. Following pads have software configurable
+            signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv,
+            audio-hv, ao-hv.
+
+        phandle: true
+
+      required:
+        - pins
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: ['#interrupt-cells']
+  "#interrupt-cells":
+    required:
+      - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    pmc@c3600000 {
+        compatible = "nvidia,tegra186-pmc";
+        reg = <0x0c360000 0x10000>,
+              <0x0c370000 0x10000>,
+              <0x0c380000 0x10000>,
+              <0x0c390000 0x10000>;
+        reg-names = "pmc", "wake", "aotag", "scratch";
+        nvidia,invert-interrupt;
+
+        sdmmc1_3v3: sdmmc1-3v3 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+        };
+
+        sdmmc1_1v8: sdmmc1-1v8 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+        };
+    };
+
+    sdmmc1: mmc@3400000 {
+        compatible = "nvidia,tegra186-sdhci";
+        reg = <0x03400000 0x10000>;
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+                 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+        reset-names = "sdhci";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_SDMMC1>;
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
new file mode 100644
index 0000000000..5e0f1dc542
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 AXI2APB bridge
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^axi2apb@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-axi2apb
+
+  reg:
+    maxItems: 6
+    description: Physical base address and length of registers for all bridges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    axi2apb: axi2apb@2390000 {
+      compatible = "nvidia,tegra194-axi2apb";
+      reg = <0x02390000 0x1000>,
+            <0x023a0000 0x1000>,
+            <0x023b0000 0x1000>,
+            <0x023c0000 0x1000>,
+            <0x023d0000 0x1000>,
+            <0x023e0000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
new file mode 100644
index 0000000000..d9c54c32c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 CBB 1.0
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 1.0 has
+  multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+  initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+  This driver handles errors due to illegal register accesses reported
+  by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+  "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+  which is the main NOC.
+
+  By default, the access issuing initiator is informed about the error
+  using SError or Data Abort exception unless the ERD (Error Response
+  Disable) is enabled/set for that initiator. If the ERD is enabled, then
+  SError or Data Abort is masked and the error is reported with interrupt.
+
+  - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+    errors due to illegal accesses from CCPLEX are reported by interrupts.
+    If ERD is not set, then error is reported by SError.
+  - For other initiators, the ERD is disabled. So, the access issuing
+    initiator is informed about the illegal access by Data Abort exception.
+    In addition, an interrupt is also generated to CCPLEX. These initiators
+    include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+    engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+    engine) etc which can initiate transactions.
+
+  The driver prints relevant debug information like Error Code, Error
+  Description, Master, Address, AXI ID, Cache, Protection, Security Group
+  etc on receiving error notification.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-cbb-noc
+      - nvidia,tegra194-aon-noc
+      - nvidia,tegra194-bpmp-noc
+      - nvidia,tegra194-rce-noc
+      - nvidia,tegra194-sce-noc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      CCPLEX receives secure or nonsecure interrupt depending on error type.
+      A secure interrupt is received for SEC(firewall) & SLV errors and a
+      non-secure interrupt is received for TMO & DEC errors.
+    items:
+      - description: non-secure interrupt
+      - description: secure interrupt
+
+  nvidia,axi2apb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the node having all axi2apb bridges which need to be checked
+      for any error logged in their status register.
+
+  nvidia,apbmisc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the apbmisc node which need to be used for reading the ERD
+      register.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,apbmisc
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-noc@2300000 {
+        compatible = "nvidia,tegra194-cbb-noc";
+        reg = <0x02300000 0x1000>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+        nvidia,axi2apb = <&axi2apb>;
+        nvidia,apbmisc = <&apbmisc>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
new file mode 100644
index 0000000000..89191cfdf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -0,0 +1,393 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-pmc
+      - nvidia,tegra30-pmc
+      - nvidia,tegra114-pmc
+      - nvidia,tegra124-pmc
+      - nvidia,tegra210-pmc
+
+  reg:
+    maxItems: 1
+    description:
+      Offset and length of the register set for the device.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: clk32k_in
+    description:
+      Must includes entries pclk and clk32k_in.
+      pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
+      input to Tegra.
+
+  clocks:
+    maxItems: 2
+    description:
+      Must contain an entry for each entry in clock-names.
+      See ../clocks/clocks-bindings.txt for details.
+
+  '#clock-cells':
+    const: 1
+    description:
+      Tegra PMC has clk_out_1, clk_out_2, and clk_out_3.
+      PMC also has blink control which allows 32Khz clock output to
+      Tegra blink pad.
+      Consumer of PMC clock should specify the desired clock by having
+      the clock ID in its "clocks" phandle cell with pmc clock provider.
+      See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC
+      clock IDs.
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      Specifies number of cells needed to encode an interrupt source.
+      The value must be 2.
+
+  interrupt-controller: true
+
+  nvidia,invert-interrupt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Inverts the PMU interrupt signal.
+      The PMU is an external Power Management Unit, whose interrupt output
+      signal is fed into the PMC. This signal is optionally inverted, and
+      then fed into the ARM GIC. The PMC is not involved in the detection
+      or handling of this interrupt signal, merely its inversion.
+
+  nvidia,core-power-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Core power request active-high.
+
+  nvidia,sys-clock-req-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: System clock request active-high.
+
+  nvidia,combined-power-req:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: combined power request for CPU and Core.
+
+  nvidia,cpu-pwr-good-en:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      CPU power good signal from external PMIC to PMC is enabled.
+
+  nvidia,suspend-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description:
+      The suspend mode that the platform should use.
+      Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
+      Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
+      Mode 2 is for LP2, CPU voltage off
+
+  nvidia,cpu-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power good time in uSec.
+
+  nvidia,cpu-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CPU power off time in uSec.
+
+  nvidia,core-pwr-good-time:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <Oscillator-stable-time Power-stable-time>
+      Core power good time in uSec.
+
+  nvidia,core-pwr-off-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Core power off time in uSec.
+
+  nvidia,lp0-vec:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      <start length> Starting address and length of LP0 vector.
+      The LP0 vector contains the warm boot code that is executed
+      by AVP when resuming from the LP0 state.
+      The AVP (Audio-Video Processor) is an ARM7 processor and
+      always being the first boot processor when chip is power on
+      or resume from deep sleep mode. When the system is resumed
+      from the deep sleep mode, the warm boot code will restore
+      some PLLs, clocks and then brings up CPU0 for resuming the
+      system.
+
+  core-supply:
+    description:
+      Phandle to voltage regulator connected to the SoC Core power rail.
+
+  core-domain:
+    type: object
+    description: |
+      The vast majority of hardware blocks of Tegra SoC belong to a
+      Core power domain, which has a dedicated voltage rail that powers
+      the blocks.
+
+    properties:
+      operating-points-v2:
+        description:
+          Should contain level, voltages and opp-supported-hw property.
+          The supported-hw is a bitfield indicating SoC speedo or process
+          ID mask.
+
+      "#power-domain-cells":
+        const: 0
+
+    required:
+      - operating-points-v2
+      - "#power-domain-cells"
+
+    additionalProperties: false
+
+  i2c-thermtrip:
+    type: object
+    description:
+      On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
+      hardware-triggered thermal reset will be enabled.
+
+    properties:
+      nvidia,i2c-controller-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          ID of I2C controller to send poweroff command to PMU.
+          Valid values are described in section 9.2.148
+          "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
+          Manual.
+
+      nvidia,bus-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Bus address of the PMU on the I2C bus.
+
+      nvidia,reg-addr:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: PMU I2C register address to issue poweroff command.
+
+      nvidia,reg-data:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Poweroff command to write to PMU.
+
+      nvidia,pinmux-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Pinmux used by the hardware when issuing Poweroff command.
+          Defaults to 0. Valid values are described in section 12.5.2
+          "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+    required:
+      - nvidia,i2c-controller-id
+      - nvidia,bus-addr
+      - nvidia,reg-addr
+      - nvidia,reg-data
+
+    additionalProperties: false
+
+  powergates:
+    type: object
+    description: |
+      This node contains a hierarchy of power domain nodes, which should
+      match the powergates on the Tegra SoC. Each powergate node
+      represents a power-domain on the Tegra SoC that can be power-gated
+      by the Tegra PMC.
+      Hardware blocks belonging to a power domain should contain
+      "power-domains" property that is a phandle pointing to corresponding
+      powergate node.
+      The name of the powergate node should be one of the below. Note that
+      not every powergate is applicable to all Tegra devices and the following
+      list shows which powergates are applicable to which devices.
+      Please refer to Tegra TRM for mode details on the powergate nodes to
+      use for each power-gate block inside Tegra.
+      Name		Description			            Devices Applicable
+      3d		  3D Graphics			            Tegra20/114/124/210
+      3d0		  3D Graphics 0		            Tegra30
+      3d1		  3D Graphics 1		            Tegra30
+      aud		  Audio				                Tegra210
+      dfd		  Debug				                Tegra210
+      dis		  Display A			              Tegra114/124/210
+      disb		Display B			              Tegra114/124/210
+      heg		  2D Graphics		            	Tegra30/114/124/210
+      iram		Internal RAM		            Tegra124/210
+      mpe		  MPEG Encode			            All
+      nvdec		NVIDIA Video Decode Engine	Tegra210
+      nvjpg		NVIDIA JPEG Engine		      Tegra210
+      pcie		PCIE				                Tegra20/30/124/210
+      sata		SATA				                Tegra30/124/210
+      sor		  Display interfaces       		Tegra124/210
+      ve2		  Video Encode Engine 2		    Tegra210
+      venc		Video Encode Engine		      All
+      vdec		Video Decode Engine		      Tegra20/30/114/124
+      vic		  Video Imaging Compositor	  Tegra124/210
+      xusba		USB Partition A			        Tegra114/124/210
+      xusbb		USB Partition B 		        Tegra114/124/210
+      xusbc		USB Partition C			        Tegra114/124/210
+
+    patternProperties:
+      "^[a-z0-9]+$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each clock required by the PMC
+              for controlling a power-gate.
+              See ../clocks/clock-bindings.txt document for more details.
+
+          resets:
+            minItems: 1
+            maxItems: 8
+            description:
+              Must contain an entry for each reset required by the PMC
+              for controlling a power-gate.
+              See ../reset/reset.txt for more details.
+
+          power-domains:
+            maxItems: 1
+
+          '#power-domain-cells':
+            const: 0
+            description: Must be 0.
+
+        required:
+          - clocks
+          - resets
+          - '#power-domain-cells'
+
+    additionalProperties: false
+
+patternProperties:
+  "^[a-f0-9]+-[a-f0-9]+$":
+    type: object
+    description:
+      This is a Pad configuration node. On Tegra SOCs a pad is a set of
+      pins which are configured as a group. The pin grouping is a fixed
+      attribute of the hardware. The PMC can be used to set pad power state
+      and signaling voltage. A pad can be either in active or power down mode.
+      The support for power state and signaling voltage configuration varies
+      depending on the pad in question. 3.3V and 1.8V signaling voltages
+      are supported on pins where software controllable signaling voltage
+      switching is available.
+
+      The pad configuration state nodes are placed under the pmc node and they
+      are referred to by the pinctrl client properties. For more information
+      see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+      The pad name should be used as the value of the pins property in pin
+      configuration nodes.
+
+      The following pads are present on Tegra124 and Tegra132
+      audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic,
+      hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl,
+      sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias.
+
+      The following pads are present on Tegra210
+      audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg,
+      debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi,
+      hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1,
+      sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias.
+
+    properties:
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Must contain name of the pad(s) to be configured.
+
+      low-power-enable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into power down mode.
+
+      low-power-disable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Configure the pad into active mode.
+
+      power-source:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+          TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+          The values are defined in
+          include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+          Power state can be configured on all Tegra124 and Tegra132
+          pads. None of the Tegra124 or Tegra132 pads support signaling
+          voltage switching.
+          All of the listed Tegra210 pads except pex-cntrl support power
+          state configuration. Signaling voltage switching is supported
+          on below Tegra210 pads.
+          audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
+          sdmmc3, spi, spi-hv, and uart.
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+dependencies:
+  "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+  "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
+  "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/soc/tegra-pmc.h>
+
+    tegra_pmc: pmc@7000e400 {
+              compatible = "nvidia,tegra210-pmc";
+              reg = <0x7000e400 0x400>;
+              core-supply = <&regulator>;
+              clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+              clock-names = "pclk", "clk32k_in";
+              #clock-cells = <1>;
+
+              nvidia,invert-interrupt;
+              nvidia,suspend-mode = <0>;
+              nvidia,cpu-pwr-good-time = <0>;
+              nvidia,cpu-pwr-off-time = <0>;
+              nvidia,core-pwr-good-time = <4587 3876>;
+              nvidia,core-pwr-off-time = <39065>;
+              nvidia,core-power-req-active-high;
+              nvidia,sys-clock-req-active-high;
+
+              pd_core: core-domain {
+                      operating-points-v2 = <&core_opp_table>;
+                      #power-domain-cells = <0>;
+              };
+
+              powergates {
+                    pd_audio: aud {
+                            clocks = <&tegra_car TEGRA210_CLK_APE>,
+                                     <&tegra_car TEGRA210_CLK_APB2APE>;
+                            resets = <&tegra_car 198>;
+                            power-domains = <&pd_core>;
+                            #power-domain-cells = <0>;
+                    };
+
+                    pd_xusbss: xusba {
+                            clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+                            power-domains = <&pd_core>;
+                            #power-domain-cells = <0>;
+                    };
+              };
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
new file mode 100644
index 0000000000..fcdf031313
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CBB 2.0
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 2.0 consists
+  of multiple sub-blocks connected to each other to create a topology.
+  The Tegra234 SoC has different fabrics based on CBB 2.0 architecture
+  which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and
+  "CBB central fabric".
+
+  In CBB 2.0, each initiator which can issue transactions connects to a
+  Root Master Node (MN) before it connects to any other element of the
+  fabric. Each Root MN contains a Error Monitor (EM) which detects and
+  logs error. Interrupts from various EM blocks are collated by Error
+  Notifier (EN) which is per fabric and presents a single interrupt from
+  fabric to the SoC interrupt controller.
+
+  The driver handles errors from CBB due to illegal register accesses
+  and prints debug information about failed transaction on receiving
+  the interrupt from EN. Debug information includes Error Code, Error
+  Description, MasterID, Fabric, SlaveID, Address, Cache, Protection,
+  Security Group etc on receiving error notification.
+
+  If the Error Response Disable (ERD) is set/enabled for an initiator,
+  then SError or Data abort exception error response is masked and an
+  interrupt is used for reporting errors due to illegal accesses from
+  that initiator. The value returned on read failures is '0xFFFFFFFF'
+  for compatibility with PCIE.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-fabric@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-aon-fabric
+      - nvidia,tegra234-bpmp-fabric
+      - nvidia,tegra234-cbb-fabric
+      - nvidia,tegra234-dce-fabric
+      - nvidia,tegra234-rce-fabric
+      - nvidia,tegra234-sce-fabric
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: secure interrupt from error notifier
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-fabric@1300000 {
+      compatible = "nvidia,tegra234-cbb-fabric";
+      reg = <0x13a00000 0x400000>;
+      interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tesla.yaml b/Documentation/devicetree/bindings/arm/tesla.yaml
new file mode 100644
index 0000000000..d670a0d562
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tesla.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tesla.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla Full Self Driving(FSD) platforms
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: FSD SoC board
+        items:
+          - enum:
+              - tesla,fsd-evb   # Tesla FSD Evaluation
+          - const: tesla,fsd
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
new file mode 100644
index 0000000000..03d2a0d79f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/k3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC architecture
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Platforms based on Texas Instruments K3 Multicore SoC architecture
+  shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: K3 AM62A7 SoC
+        items:
+          - enum:
+              - ti,am62a7-sk
+          - const: ti,am62a7
+
+      - description: K3 AM62P5 SoC and Boards
+        items:
+          - enum:
+              - ti,am62p5-sk
+          - const: ti,am62p5
+
+      - description: K3 AM625 SoC PHYTEC phyBOARD-Lyra
+        items:
+          - const: phytec,am625-phyboard-lyra-rdk
+          - const: phytec,am62-phycore-som
+          - const: ti,am625
+
+      - description: K3 AM625 SoC
+        items:
+          - enum:
+              - beagle,am625-beagleplay
+              - ti,am625-sk
+              - ti,am62-lp-sk
+          - const: ti,am625
+
+      - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards
+        items:
+          - enum:
+              - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia
+              - toradex,verdin-am62-nonwifi-dev    # Verdin AM62 Module on Verdin Development Board
+              - toradex,verdin-am62-nonwifi-yavia  # Verdin AM62 Module on Yavia
+          - const: toradex,verdin-am62-nonwifi     # Verdin AM62 Module without Wi-Fi / BT
+          - const: toradex,verdin-am62             # Verdin AM62 Module
+          - const: ti,am625
+
+      - description: K3 AM62x SoC Toradex Verdin Modules and Carrier Boards with Wi-Fi / BT
+        items:
+          - enum:
+              - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-am62-wifi-dev    # Verdin AM62 Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-am62-wifi-yavia  # Verdin AM62 Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-am62-wifi     # Verdin AM62 Wi-Fi / BT Module
+          - const: toradex,verdin-am62          # Verdin AM62 Module
+          - const: ti,am625
+
+      - description: K3 AM642 SoC
+        items:
+          - enum:
+              - ti,am642-evm
+              - ti,am642-sk
+          - const: ti,am642
+
+      - description: K3 AM642 SoC PHYTEC phyBOARD-Electra
+        items:
+          - const: phytec,am642-phyboard-electra-rdk
+          - const: phytec,am64-phycore-som
+          - const: ti,am642
+
+      - description: K3 AM642 SoC on TQ-Systems TQMaX4XxL SoM
+        items:
+          - enum:
+              - tq,am642-tqma6442l-mbax4xxl # MBaX4XxL base board
+          - const: tq,am642-tqma6442l
+          - const: ti,am642
+
+      - description: K3 AM654 SoC
+        items:
+          - enum:
+              - siemens,iot2050-advanced
+              - siemens,iot2050-advanced-m2
+              - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
+              - ti,am654-evm
+          - const: ti,am654
+
+      - description: K3 J7200 SoC
+        oneOf:
+          - const: ti,j7200
+          - items:
+              - enum:
+                  - ti,j7200-evm
+              - const: ti,j7200
+
+      - description: K3 J721E SoC
+        oneOf:
+          - const: ti,j721e
+          - items:
+              - enum:
+                  - beagle,j721e-beagleboneai64
+                  - ti,j721e-evm
+                  - ti,j721e-sk
+              - const: ti,j721e
+
+      - description: K3 J721s2 SoC
+        items:
+          - enum:
+              - ti,am68-sk
+              - ti,j721s2-evm
+          - const: ti,j721s2
+
+      - description: K3 J784s4 SoC
+        items:
+          - enum:
+              - ti,am69-sk
+              - ti,j784s4-evm
+          - const: ti,j784s4
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/nspire.yaml b/Documentation/devicetree/bindings/arm/ti/nspire.yaml
new file mode 100644
index 0000000000..cc2023bb7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/nspire.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/nspire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE calculators
+
+maintainers:
+  - Daniel Tang <dt.tangr@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          # CX models
+          - ti,nspire-cx
+          # Touchpad models
+          - ti,nspire-tp
+          # Clickpad models
+          - ti,nspire-clp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
new file mode 100644
index 0000000000..b18fc04639
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/omap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OMAP SoC architecture
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: Platforms based on Texas Instruments OMAP SoC architecture.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: TI OMAP2420 SoC based platforms
+        items:
+          - enum:
+              - nokia,n800
+              - nokia,n810
+              - nokia,n810-wimax
+              - ti,omap2420-h4
+          - const: ti,omap2420
+          - const: ti,omap2
+
+      - description: TI OMAP2430 SoC based platforms
+        items:
+          - enum:
+              - ti,omap2430-sdp # TI OMAP2430 SDP
+          - const: ti,omap2430
+          - const: ti,omap2
+
+      - description: TI OMAP3430 SoC based platforms
+        items:
+          - enum:
+              - compulab,omap3-cm-t3530
+              - logicpd,dm3730-som-lv-devkit  # LogicPD Zoom OMAP35xx SOM-LV Development Kit
+              - logicpd,dm3730-torpedo-devkit # LogicPD Zoom OMAP35xx Torpedo Development Kit
+              - nokia,omap3-n900
+              - openpandora,omap3-pandora-600mhz
+              - ti,omap3430-sdp
+              - ti,omap3-beagle
+              - ti,omap3-evm                  # TI OMAP35XX EVM (TMDSEVM3530)
+              - ti,omap3-ldp                  # TI OMAP3430 LDP (Zoom1 Labrador)
+              - timll,omap3-devkit8000
+          - const: ti,omap3430
+          - const: ti,omap3
+
+      - description: Early BeagleBoard revisions A to B4 with a timer quirk
+        items:
+          - const: ti,omap3-beagle-ab4
+          - const: ti,omap3-beagle
+          - const: ti,omap3430
+          - const: ti,omap3
+
+      - description: Gumstix Overo TI OMAP 3430/3630 boards + expansion boards
+        items:
+          - enum:
+              - gumstix,omap3-overo-alto35
+              - gumstix,omap3-overo-chestnut43
+              - gumstix,omap3-overo-gallop43
+              - gumstix,omap3-overo-palo35
+              - gumstix,omap3-overo-palo43
+              - gumstix,omap3-overo-summit
+              - gumstix,omap3-overo-tobi
+              - gumstix,omap3-overo-tobiduo
+          - const: gumstix,omap3-overo
+          - enum:
+              - ti,omap3430
+              - ti,omap3630
+
+      - description: TI OMAP3630 SoC based platforms
+        items:
+          - enum:
+              - amazon,omap3-echo             # Amazon Echo (first generation)
+              - compulab,omap3-cm-t3730
+              - goldelico,gta04
+              - lg,omap3-sniper               # LG Optimus Black
+              - logicpd,dm3730-som-lv-devkit  # LogicPD Zoom DM3730 SOM-LV Development Kit
+              - logicpd,dm3730-torpedo-devkit # LogicPD Zoom DM3730 Torpedo + Wireless Development Kit
+              - nokia,omap3-n9
+              - nokia,omap3-n950
+              - openpandora,omap3-pandora-1ghz
+              - ti,omap3-beagle-xm
+              - ti,omap3-evm-37xx             # TI OMAP37XX EVM (TMDSEVM3730)
+              - ti,omap3-zoom3
+          - const: ti,omap3630
+          - const: ti,omap3
+
+      - description: TI AM35 SoC based platforms
+        items:
+          - enum:
+              - compulab,omap3-sbc-t3517 # CompuLab SBC-T3517 with CM-T3517
+              - teejet,mt_ventoux
+              - ti,am3517-craneboard     # TI AM3517 CraneBoard (TMDSEVM3517)
+              - ti,am3517-evm            # TI AM3517 EVM (AM3517/05 TMDSEVM3517)
+          - const: ti,am3517
+          - const: ti,omap3
+
+      - description: TI AM33 based platform
+        items:
+          - enum:
+              - compulab,cm-t335
+              - moxa,uc-8100-me-t
+              - novatech,am335x-lxm
+              - ti,am335x-bone
+              - ti,am335x-evm
+              - ti,am3359-icev2
+          - const: ti,am33xx
+
+      - description: Compulab board variants based on TI AM33
+        items:
+          - enum:
+              - compulab,sbc-t335
+          - const: compulab,cm-t335
+          - const: ti,am33xx
+
+      - description: Phytec boards based on TI AM33
+        items:
+          - enum:
+              - phytec,am335x-wega
+              - phytec,am335x-pcm-953
+              - phytec,am335x-regor
+          - const: phytec,am335x-phycore-som
+          - const: ti,am33xx
+
+      - description: TI OMAP4430 SoC based platforms
+        items:
+          - enum:
+              - amazon,omap4-kc1        # Amazon Kindle Fire (first generation)
+              - motorola,droid4         # Motorola Droid 4 XT894
+              - motorola,droid-bionic   # Motorola Droid Bionic XT875
+              - ti,omap4-panda
+              - ti,omap4-sdp
+          - const: ti,omap4430
+          - const: ti,omap4
+
+      - description: OMAP4 DuoVero with Parlor expansion board/daughter board
+        items:
+          - const: gumstix,omap4-duovero-parlor
+          - const: gumstix,omap4-duovero
+          - const: ti,omap4430
+          - const: ti,omap4
+
+      - description: TI OMAP4460 SoC based platforms
+        items:
+          - enum:
+              - epson,embt2ws    # Epson Moverio BT-200
+              - ti,omap4-panda-es
+          - const: ti,omap4460
+          - const: ti,omap4
+
+      - description: VAR-OM44 boards
+        items:
+          - enum:
+              - variscite,var-dvk-om44
+              - variscite,var-stk-om44
+          - const: variscite,var-som-om44
+          - const: ti,omap4460
+          - const: ti,omap4
+
+      - description: TI OMAP5 SoC based platforms
+        items:
+          - enum:
+              - compulab,omap5-cm-t54
+              - isee,omap5-igep0050
+              - ti,omap5-uevm
+          - const: ti,omap5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
new file mode 100644
index 0000000000..1656d1a447
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DaVinci Platforms
+
+maintainers:
+  - Sekhar Nori <nsekhar@ti.com>
+
+description:
+  DA850/OMAP-L138/AM18x based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - ti,da850-evm    # DA850/OMAP-L138/AM18x Evaluation Module (EVM) board
+          - ti,da850-lcdk   # DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board
+          - enbw,cmc        # EnBW AM1808 based CMC board
+          - lego,ev3        # LEGO MINDSTORMS EV3 (AM1808 based)
+      - const: ti,da850
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml
new file mode 100644
index 0000000000..716ba4a3ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/toshiba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti Platform
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Visconti5 TMPV7708
+        items:
+          - enum:
+              - toshiba,tmpv7708-rm-mbrc  # TMPV7708 RM main board
+              - toshiba,tmpv7708-visrobo-vrb  # TMPV7708 VisROBO VRB board
+          - const: toshiba,tmpv7708
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
new file mode 100644
index 0000000000..b42d20fa43
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ux500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ux500 platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: ST-Ericsson HREF (pre-v60)
+        items:
+          - const: st-ericsson,mop500
+          - const: st-ericsson,u8500
+
+      - description: ST-Ericsson HREF520
+        items:
+          - const: st-ericsson,href520
+          - const: st-ericsson,u8500
+
+      - description: ST-Ericsson HREF (v60+)
+        items:
+          - const: st-ericsson,hrefv60+
+          - const: st-ericsson,u8500
+
+      - description: Calao Systems Snowball
+        items:
+          - const: calaosystems,snowball-a9500
+          - const: st-ericsson,u9500
+
+      - description: Samsung Galaxy Ace 2 (GT-I8160)
+        items:
+          - const: samsung,codina
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Exhibit (SGH-T599)
+        items:
+          - const: samsung,codina-tmo
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Beam (GT-I8530)
+        items:
+          - const: samsung,gavini
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy S III mini (GT-I8190)
+        items:
+          - const: samsung,golden
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy S Advance (GT-I9070)
+        items:
+          - const: samsung,janice
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Amp (SGH-I407)
+        items:
+          - const: samsung,kyle
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy XCover 2 (GT-S7710)
+        items:
+          - const: samsung,skomer
+          - const: st-ericsson,u8500
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/ux500/boards.txt b/Documentation/devicetree/bindings/arm/ux500/boards.txt
new file mode 100644
index 0000000000..18d55532d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ux500/boards.txt
@@ -0,0 +1,83 @@
+ST-Ericsson Ux500 boards
+------------------------
+
+Required properties (in root node) one of these:
+	compatible = "st-ericsson,mop500" (legacy)
+	compatible = "st-ericsson,u8500"
+
+Required node (under root node):
+
+soc: represents the system-on-chip and contains the chip
+peripherals
+
+Required property of soc node, one of these:
+	compatible = "stericsson,db8500"
+
+Required subnodes under soc node:
+
+backupram: (used for CPU spin tables and for storing data
+during retention, system won't boot without this):
+	compatible = "ste,dbx500-backupram"
+
+scu:
+	see binding for arm/arm,scu.yaml
+
+interrupt-controller:
+	see binding for interrupt-controller/arm,gic.txt
+
+timer:
+	see binding for timer/arm,twd-timer.yaml
+
+clocks:
+	see binding for clocks/ux500.txt
+
+Example:
+
+/dts-v1/;
+
+/ {
+        model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+        compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+        soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		backupram@80150000 {
+			compatible = "ste,dbx500-backupram";
+			reg = <0x80150000 0x2000>;
+		};
+
+		intc: interrupt-controller@a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		scu@a0410000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xa0410000 0x100>;
+		};
+
+		timer@a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+			clocks = <&smp_twd_clk>;
+		};
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+        };
+};
diff --git a/Documentation/devicetree/bindings/arm/ux500/power_domain.txt b/Documentation/devicetree/bindings/arm/ux500/power_domain.txt
new file mode 100644
index 0000000000..5679d1742d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ux500/power_domain.txt
@@ -0,0 +1,35 @@
+* ST-Ericsson UX500 PM Domains
+
+UX500 supports multiple PM domains which are used to gate power to one or
+more peripherals on the SOC.
+
+The implementation of PM domains for UX500 are based upon the generic PM domain
+and use the corresponding DT bindings.
+
+==PM domain providers==
+
+Required properties:
+ - compatible: Must be "stericsson,ux500-pm-domains".
+ - #power-domain-cells : Number of cells in a power domain specifier, must be 1.
+
+Example:
+	pm_domains: pm_domains0 {
+		compatible = "stericsson,ux500-pm-domains";
+		#power-domain-cells = <1>;
+	};
+
+==PM domain consumers==
+
+Required properties:
+ - power-domains: A phandle and PM domain specifier. Below are the list of
+		valid specifiers:
+
+		Index	Specifier
+		-----	---------
+		0	DOMAIN_VAPE
+
+Example:
+	sdi0_per1@80126000 {
+		compatible = "arm,pl18x", "arm,primecell";
+		power-domains = <&pm_domains DOMAIN_VAPE>
+	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
new file mode 100644
index 0000000000..b74380da31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express configuration bus
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control register block, acting as a bridge to the
+  platform's configuration bus via "system control" interface, addressing
+  devices with site number, position in the board stack, config controller,
+  function and device numbers - see motherboard's TRM for more details.
+
+properties:
+  compatible:
+    const: arm,vexpress,config-bus
+
+  arm,vexpress,config-bridge:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the sysreg node.
+
+  muxfpga:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-muxfpga
+
+      arm,vexpress-sysreg,func:
+        description: FPGA specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 7
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  shutdown:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-shutdown
+
+      arm,vexpress-sysreg,func:
+        description: shutdown identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 8
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  reboot:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reboot
+
+      arm,vexpress-sysreg,func:
+        description: reboot identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 9
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  dvimode:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-dvimode
+
+      arm,vexpress-sysreg,func:
+        description: DVI mode identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 11
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+additionalProperties: false
+
+required:
+  - compatible
+  - arm,vexpress,config-bridge
+
+patternProperties:
+  'clk[0-9]*$':
+    type: object
+    description:
+      clocks
+
+    properties:
+      compatible:
+        const: arm,vexpress-osc
+
+      arm,vexpress-sysreg,func:
+        description: clock specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 1
+          - description: clock number
+
+      freq-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimal clock frequency
+          - description: maximum clock frequency
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+      - "#clock-cells"
+
+  "^volt-.+$":
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        const: arm,vexpress-volt
+
+      arm,vexpress-sysreg,func:
+        description: regulator specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 2
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    unevaluatedProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^amp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-amp
+
+      arm,vexpress-sysreg,func:
+        description: current sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 3
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^temp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-temp
+
+      arm,vexpress-sysreg,func:
+        description: temperature sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 4
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^reset[0-9]*$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reset
+
+      arm,vexpress-sysreg,func:
+        description: reset specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 5
+          - description: reset device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^power-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-power
+
+      arm,vexpress-sysreg,func:
+        description: power sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 12
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^energy(-.+)?$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-energy
+
+      arm,vexpress-sysreg,func:
+        description: energy sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 13
+              - description: device number
+          - items:
+              - const: 13
+              - description: device number
+              - const: 13
+              - description: second device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+examples:
+  - |
+    mcc {
+        compatible = "arm,vexpress,config-bus";
+        arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+        clk0 {
+            compatible = "arm,vexpress-osc";
+            arm,vexpress-sysreg,func = <1 0>;
+            #clock-cells = <0>;
+        };
+
+        energy {
+            compatible = "arm,vexpress-energy";
+            arm,vexpress-sysreg,func = <13 0>, <13 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-scc.txt b/Documentation/devicetree/bindings/arm/vexpress-scc.txt
new file mode 100644
index 0000000000..ae5043e42e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-scc.txt
@@ -0,0 +1,33 @@
+ARM Versatile Express Serial Configuration Controller
+-----------------------------------------------------
+
+Test chips for ARM Versatile Express platform implement SCC (Serial
+Configuration Controller) interface, used to set initial conditions
+for the test chip.
+
+In some cases its registers are also mapped in normal address space
+and can be used to obtain runtime information about the chip internals
+(like silicon temperature sensors) and as interface to other subsystems
+like platform configuration control and power management.
+
+Required properties:
+
+- compatible value: "arm,vexpress-scc,<model>", "arm,vexpress-scc";
+		    where <model> is the full tile model name (as used
+		    in the tile's Technical Reference Manual),
+		    eg. for Coretile Express A15x2 A7x3 (V2P-CA15_A7):
+	compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+
+Optional properties:
+
+- reg: when the SCC is memory mapped, physical address and size of the
+       registers window
+- interrupts: when the SCC can generate a system-level interrupt
+
+Example:
+
+	scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
new file mode 100644
index 0000000000..be6e3b5425
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express system registers
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    const: arm,vexpress-sysreg
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  gpio-controller:
+    deprecated: true
+
+  "#gpio-cells":
+    deprecated: true
+    const: 2
+
+additionalProperties: false
+
+patternProperties:
+  '^gpio@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      GPIO children
+
+    properties:
+      compatible:
+        enum:
+          - arm,vexpress-sysreg,sys_led
+          - arm,vexpress-sysreg,sys_mci
+          - arm,vexpress-sysreg,sys_flash
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description: |
+          The first cell is the function number:
+          for sys_led : 0..7 = LED 0..7
+          for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+          for sys_flash : 0 = NOR FLASH WPn
+          The second cell can take standard GPIO flags.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,vexpress-sysreg";
+        reg = <0x00000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x1000>;
+
+        v2m_led_gpios: gpio@8 {
+            compatible = "arm,vexpress-sysreg,sys_led";
+            reg = <0x008 4>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml
new file mode 100644
index 0000000000..5d5ad5a604
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vt8500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA/Wondermedia VT8500 Platforms
+
+maintainers:
+  - Tony Prisk <linux@prisktech.co.nz>
+description: test
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - via,vt8500
+          - wm,wm8505
+          - wm,wm8650
+          - wm,wm8750
+          - wm,wm8850
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
new file mode 100644
index 0000000000..521b9c7de9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia VT8500 Power Management Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-pmc"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+	pmc@d8130000 {
+		compatible = "via,vt8500-pmc";
+		reg = <0xd8130000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
new file mode 100644
index 0000000000..f925290d46
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -0,0 +1,62 @@
+* Xen hypervisor device tree bindings
+
+Xen ARM virtual platforms shall have a top-level "hypervisor" node with
+the following properties:
+
+- compatible:
+	compatible = "xen,xen-<version>", "xen,xen";
+  where <version> is the version of the Xen ABI of the platform.
+
+- reg: specifies the base physical address and size of the regions in memory
+  where the special resources should be mapped to, using an HYPERVISOR_memory_op
+  hypercall.
+  Region 0 is reserved for mapping grant table, it must be always present.
+  The memory region is large enough to map the whole grant table (it is larger
+  or equal to gnttab_max_grant_frames()).
+  Regions 1...N are extended regions (unused address space) for mapping foreign
+  GFNs and grants, they might be absent if there is nothing to expose.
+
+- interrupts: the interrupt used by Xen to inject event notifications.
+  A GIC node is also required.
+
+To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
+under /hypervisor with following parameters:
+
+________________________________________________________________________________
+Name                      | Size   | Description
+================================================================================
+xen,uefi-system-table     | 64-bit | Guest physical address of the UEFI System
+			  |	   | Table.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-start       | 64-bit | Guest physical address of the UEFI memory
+			  |	   | map.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-size        | 32-bit | Size in bytes of the UEFI memory map
+                          |        | pointed to in previous entry.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-desc-size   | 32-bit | Size in bytes of each entry in the UEFI
+                          |        | memory map.
+--------------------------------------------------------------------------------
+xen,uefi-mmap-desc-ver    | 32-bit | Version of the mmap descriptor format.
+--------------------------------------------------------------------------------
+
+Example (assuming #address-cells = <2> and #size-cells = <2>):
+
+hypervisor {
+	compatible = "xen,xen-4.3", "xen,xen";
+	reg = <0 0xb0000000 0 0x20000>;
+	interrupts = <1 15 0xf08>;
+	uefi {
+		xen,uefi-system-table = <0xXXXXXXXX>;
+		xen,uefi-mmap-start = <0xXXXXXXXX>;
+		xen,uefi-mmap-size = <0xXXXXXXXX>;
+		xen,uefi-mmap-desc-size = <0xXXXXXXXX>;
+		xen,uefi-mmap-desc-ver = <0xXXXXXXXX>;
+        };
+};
+
+The format and meaning of the "xen,uefi-*" parameters are similar to those in
+Documentation/arch/arm/uefi.rst, which are provided by the regular UEFI stub. However
+they differ because they are provided by the Xen hypervisor, together with a set
+of UEFI runtime services implemented via hypercalls, see
+http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,platform.h.html.
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
new file mode 100644
index 0000000000..f57ed03478
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Platforms
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adapteva,parallella
+              - digilent,zynq-zybo
+              - digilent,zynq-zybo-z7
+              - ebang,ebaz4205
+              - myir,zynq-zturn-v5
+              - myir,zynq-zturn
+              - xlnx,zynq-cc108
+              - xlnx,zynq-zc702
+              - xlnx,zynq-zc706
+              - xlnx,zynq-zc770-xm010
+              - xlnx,zynq-zc770-xm011
+              - xlnx,zynq-zc770-xm012
+              - xlnx,zynq-zc770-xm013
+          - const: xlnx,zynq-7000
+
+      - items:
+          - const: avnet,zynq-microzed
+          - const: xlnx,zynq-microzed
+          - const: xlnx,zynq-7000
+
+      - items:
+          - const: avnet,zynq-zed
+          - const: xlnx,zynq-zed
+          - const: xlnx,zynq-7000
+
+      - items:
+          - enum:
+              - xlnx,zynqmp-zc1751
+          - const: xlnx,zynqmp
+
+      - description: Xilinx internal board zc1232
+        items:
+          - const: xlnx,zynqmp-zc1232-revA
+          - const: xlnx,zynqmp-zc1232
+          - const: xlnx,zynqmp
+
+      - description: Xilinx internal board zc1254
+        items:
+          - const: xlnx,zynqmp-zc1254-revA
+          - const: xlnx,zynqmp-zc1254
+          - const: xlnx,zynqmp
+
+      - description: Xilinx evaluation board zcu1275
+        items:
+          - const: xlnx,zynqmp-zcu1275-revA
+          - const: xlnx,zynqmp-zcu1275
+          - const: xlnx,zynqmp
+
+      - description: Xilinx 96boards compatible board zcu100
+        items:
+          - const: xlnx,zynqmp-zcu100-revC
+          - const: xlnx,zynqmp-zcu100
+          - const: xlnx,zynqmp
+
+      - description: Xilinx 96boards compatible board Ultra96
+        items:
+          - const: avnet,ultra96-rev1
+          - const: avnet,ultra96
+          - const: xlnx,zynqmp-zcu100-revC
+          - const: xlnx,zynqmp-zcu100
+          - const: xlnx,zynqmp
+
+      - description: Xilinx evaluation board zcu102
+        items:
+          - enum:
+              - xlnx,zynqmp-zcu102-revA
+              - xlnx,zynqmp-zcu102-revB
+              - xlnx,zynqmp-zcu102-rev1.0
+              - xlnx,zynqmp-zcu102-rev1.1
+          - const: xlnx,zynqmp-zcu102
+          - const: xlnx,zynqmp
+
+      - description: Xilinx evaluation board zcu104
+        items:
+          - enum:
+              - xlnx,zynqmp-zcu104-revA
+              - xlnx,zynqmp-zcu104-revC
+              - xlnx,zynqmp-zcu104-rev1.0
+          - const: xlnx,zynqmp-zcu104
+          - const: xlnx,zynqmp
+
+      - description: Xilinx evaluation board zcu106
+        items:
+          - enum:
+              - xlnx,zynqmp-zcu106-revA
+              - xlnx,zynqmp-zcu106-rev1.0
+          - const: xlnx,zynqmp-zcu106
+          - const: xlnx,zynqmp
+
+      - description: Xilinx evaluation board zcu111
+        items:
+          - enum:
+              - xlnx,zynqmp-zcu111-revA
+              - xlnx,zynqmp-zcu111-rev1.0
+          - const: xlnx,zynqmp-zcu111
+          - const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOMs
+        items:
+          - const: xlnx,zynqmp-sm-k26-rev1
+          - const: xlnx,zynqmp-sm-k26-revB
+          - const: xlnx,zynqmp-sm-k26-revA
+          - const: xlnx,zynqmp-sm-k26
+          - const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOMs (starter)
+        items:
+          - const: xlnx,zynqmp-smk-k26-rev1
+          - const: xlnx,zynqmp-smk-k26-revB
+          - const: xlnx,zynqmp-smk-k26-revA
+          - const: xlnx,zynqmp-smk-k26
+          - const: xlnx,zynqmp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
new file mode 100644
index 0000000000..38770c4c85
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+  This document defines device tree properties for a common AHCI SATA
+  controller implementation. It's hardware interface is supposed to
+  conform to the technical standard defined by Intel (see Serial ATA
+  Advanced Host Controller Interface specification for details). The
+  document doesn't constitute a DT-node binding by itself but merely
+  defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  reg:
+    description:
+      Generic AHCI registers space conforming to the Serial ATA AHCI
+      specification.
+
+  reg-names:
+    description: CSR space IDs
+    contains:
+      const: ahci
+
+  interrupts:
+    description:
+      Generic AHCI state change interrupt. Can be implemented either as a
+      single line attached to the controller or as a set of the signals
+      indicating the particular port events.
+    minItems: 1
+    maxItems: 32
+
+  ahci-supply:
+    description: Power regulator for AHCI controller
+
+  target-supply:
+    description: Power regulator for SATA target device
+
+  phy-supply:
+    description: Power regulator for SATA PHY
+
+  phys:
+    description: Reference to the SATA PHY node
+    maxItems: 1
+
+  phy-names:
+    const: sata-phy
+
+  hba-cap:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitfield of the HBA generic platform capabilities like Staggered
+      Spin-up or Mechanical Presence Switch support. It can be used to
+      appropriately initialize the HWinit fields of the HBA CAP register
+      in case if the system firmware hasn't done it.
+
+  ports-implemented:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Mask that indicates which ports the HBA supports. Useful if PI is not
+      programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: '#/$defs/ahci-port'
+    description:
+      It is optionally possible to describe the ports as sub-nodes so
+      to enable each port independently when dealing with multiple PHYs.
+
+required:
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+$defs:
+  ahci-port:
+    $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+    properties:
+      reg:
+        description:
+          AHCI SATA port identifier. By design AHCI controller can't have
+          more than 32 ports due to the CAP.NP fields and PI register size
+          constraints.
+        minimum: 0
+        maximum: 31
+
+      phys:
+        description: Individual AHCI SATA port PHY
+        maxItems: 1
+
+      phy-names:
+        description: AHCI SATA port PHY ID
+        const: sata-phy
+
+      target-supply:
+        description: Power regulator for SATA port target device
+
+      hba-port-cap:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Bitfield of the HBA port-specific platform capabilities like Hot
+          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+          for details). It can be used to initialize the HWinit fields of
+          the PxCMD register in case if the system firmware hasn't done it.
+
+    required:
+      - reg
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 0000000000..5f81934177
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@@ -0,0 +1,18 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+  - compatible: must be "ti,da850-ahci"
+  - reg: physical base addresses and sizes of the two register regions
+         used by the controller: the register map as defined by the
+         AHCI 1.1 standard and the Power Down Control Register (PWRDN)
+         for enabling/disabling the SATA clock receiver
+  - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Example:
+
+	sata: sata@218000 {
+		compatible = "ti,da850-ahci";
+		reg = <0x218000 0x2000>, <0x22c018 0x4>;
+		interrupts = <67>;
+	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-dm816.txt b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
new file mode 100644
index 0000000000..f8c535f354
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
@@ -0,0 +1,21 @@
+Device tree binding for the TI DM816 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+  - compatible: must be "ti,dm816-ahci"
+  - reg: physical base address and size of the register region used by
+         the controller (as defined by the AHCI 1.1 standard)
+  - interrupts: interrupt specifier (refer to the interrupt binding)
+  - clocks: list of phandle and clock specifier pairs (or only
+            phandles for clock providers with '0' defined for
+            #clock-cells); two clocks must be specified: the functional
+            clock and an external reference clock
+
+Example:
+
+	sata: sata@4a140000 {
+		compatible = "ti,dm816-ahci";
+		reg = <0x4a140000 0x10000>;
+		interrupts = <16>;
+		clocks = <&sysclk5_ck>, <&sata_refclk>;
+	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
new file mode 100644
index 0000000000..7c3ca0e13d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
@@ -0,0 +1,21 @@
+Binding for Freescale QorIQ AHCI SATA Controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register area.
+  - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
+  - clocks: Input clock specifier. Refer to common clock bindings.
+  - interrupts: Interrupt specifier. Refer to interrupt binding.
+
+Optional properties:
+  - dma-coherent: Enable AHCI coherent DMA operation.
+  - reg-names: register area names when there are more than 1 register area.
+
+Examples:
+	sata@3200000 {
+		compatible = "fsl,ls1021a-ahci";
+		reg = <0x0 0x3200000 0x0 0x10000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&platform_clk 1>;
+		dma-coherent;
+	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
new file mode 100644
index 0000000000..d2aa696b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
@@ -0,0 +1,51 @@
+MediaTek Serial ATA controller
+
+Required properties:
+ - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
+		     When using "mediatek,mtk-ahci" compatible strings, you
+		     need SoC specific ones in addition, one of:
+		     - "mediatek,mt7622-ahci"
+ - reg		   : Physical base addresses and length of register sets.
+ - interrupts	   : Interrupt associated with the SATA device.
+ - interrupt-names : Associated name must be: "hostc".
+ - clocks	   : A list of phandle and clock specifier pairs, one for each
+		     entry in clock-names.
+ - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
+ - phys		   : A phandle and PHY specifier pair for the PHY port.
+ - phy-names	   : Associated name must be: "sata-phy".
+ - ports-implemented : See ./ahci-platform.txt for details.
+
+Optional properties:
+ - power-domains   : A phandle and power domain specifier pair to the power
+		     domain which is responsible for collapsing and restoring
+		     power to the peripheral.
+ - resets	   : Must contain an entry for each entry in reset-names.
+		     See ../reset/reset.txt for details.
+ - reset-names	   : Associated names must be: "axi", "sw", "reg".
+ - mediatek,phy-mode : A phandle to the system controller, used to enable
+		       SATA function.
+
+Example:
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,mt7622-ahci",
+			     "mediatek,mtk-ahci";
+		reg = <0 0x1a200000 0 0x1100>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		clocks = <&pciesys CLK_SATA_AHB_EN>,
+			 <&pciesys CLK_SATA_AXI_EN>,
+			 <&pciesys CLK_SATA_ASIC_EN>,
+			 <&pciesys CLK_SATA_RBC_EN>,
+			 <&pciesys CLK_SATA_PM_EN>;
+		clock-names = "ahb", "axi", "asic", "rbc", "pm";
+		phys = <&u3port1 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			 <&pciesys MT7622_SATA_PHY_SW_RST>,
+			 <&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi", "sw", "reg";
+		mediatek,phy-mode = <&pciesys>;
+	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
new file mode 100644
index 0000000000..358617115b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AHCI SATA Controller
+
+description: |
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+  It is possible, but not required, to represent each port as a sub-node.
+  It allows to enable each port independently when dealing with multiple
+  PHYs.
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Jens Axboe <axboe@kernel.dk>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-ahci
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+          - marvell,armada-8k-ahci
+          - marvell,berlin2q-ahci
+          - socionext,uniphier-pro4-ahci
+          - socionext,uniphier-pxs2-ahci
+          - socionext,uniphier-pxs3-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,iproc-ahci
+              - marvell,armada-8k-ahci
+              - marvell,berlin2-ahci
+              - marvell,berlin2q-ahci
+              - socionext,uniphier-pro4-ahci
+              - socionext,uniphier-pxs2-ahci
+              - socionext,uniphier-pxs3-ahci
+          - const: generic-ahci
+      - enum:
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    anyOf:
+      - required: [ phys ]
+      - required: [ target-supply ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ahci
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset line for the parent
+            - description: reset line for the glue logic
+            - description: reset line for the controller
+      required:
+        - resets
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - socionext,uniphier-pxs2-ahci
+                - socionext,uniphier-pxs3-ahci
+      then:
+        properties:
+          resets:
+            items:
+              - description: reset for the glue logic
+              - description: reset for the controller
+        required:
+          - resets
+      else:
+        properties:
+          resets:
+            maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "snps,spear-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/berlin2q.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@f7e90000 {
+        compatible = "marvell,berlin2q-ahci", "generic-ahci";
+        reg = <0xf7e90000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&chip CLKID_SATA>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hba-cap = <HBA_SMPS>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+
+            phys = <&sata_phy 0>;
+            target-supply = <&reg_sata0>;
+
+            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+
+            phys = <&sata_phy 1>;
+            target-supply = <&reg_sata1>;
+
+            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
new file mode 100644
index 0000000000..909c993536
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -0,0 +1,35 @@
+STMicroelectronics STi SATA controller
+
+This binding describes a SATA device.
+
+Required properties:
+ - compatible	   : Must be "st,ahci"
+ - reg		   : Physical base addresses and length of register sets
+ - interrupts	   : Interrupt associated with the SATA device
+ - interrupt-names :   Associated name must be; "hostc"
+ - clocks	   : The phandle for the clock
+ - clock-names	   :   Associated name must be; "ahci_clk"
+ - phys		   : The phandle for the PHY port
+ - phy-names	   :   Associated name must be; "ahci_phy"
+
+Optional properties:
+ - resets	   : The power-down, soft-reset and power-reset lines of SATA IP
+ - reset-names	   :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
+
+Example:
+
+	/* Example for stih407 family silicon */
+	sata0: sata@9b20000 {
+		compatible	= "st,ahci";
+		reg		= <0x9b20000 0x1000>;
+		interrupts	= <GIC_SPI 159 IRQ_TYPE_NONE>;
+		interrupt-names	= "hostc";
+		phys		= <&phy_port0 PHY_TYPE_SATA>;
+		phy-names	= "ahci_phy";
+		resets		= <&powerdown STIH407_SATA0_POWERDOWN>,
+				  <&softreset STIH407_SATA0_SOFTRESET>,
+				  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+		reset-names	= "pwr-dwn", "sw-rst", "pwr-rst";
+		clocks		= <&clk_s_c0_flexgen CLK_ICN_REG>;
+		clock-names	= "ahci_clk";
+	};
diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
new file mode 100644
index 0000000000..2011bd03cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/allwinner,sun4i-a10-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AHCI SATA Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-ahci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHCI Bus Clock
+      - description: AHCI Module Clock
+
+  interrupts:
+    maxItems: 1
+
+  target-supply:
+    description: Regulator for SATA target power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ahci: sata@1c18000 {
+        compatible = "allwinner,sun4i-a10-ahci";
+        reg = <0x01c18000 0x1000>;
+        interrupts = <56>;
+        clocks = <&pll6 0>, <&ahb_gates 25>;
+        target-supply = <&reg_ahci_5v>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
new file mode 100644
index 0000000000..a2afe2ad60
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/allwinner,sun8i-r40-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 AHCI SATA Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-r40-ahci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHCI Bus Clock
+      - description: AHCI Module Clock
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ahci
+
+  ahci-supply:
+    description: Regulator for the AHCI controller
+
+  phy-supply:
+    description: Regulator for the SATA PHY power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+    ahci: sata@1c18000 {
+        compatible = "allwinner,sun8i-r40-ahci";
+        reg = <0x01c18000 0x1000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+        resets = <&ccu RST_BUS_SATA>;
+        reset-names = "ahci";
+        ahci-supply = <&reg_dldo4>;
+        phy-supply = <&reg_eldo3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
new file mode 100644
index 0000000000..02e690a675
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -0,0 +1,77 @@
+* APM X-Gene 6.0 Gb/s SATA host controller nodes
+
+SATA host controller nodes are defined to describe on-chip Serial ATA
+controllers. Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible		: Shall contain:
+  * "apm,xgene-ahci"
+- reg			: First memory resource shall be the AHCI memory
+			  resource.
+			  Second memory resource shall be the host controller
+			  core memory resource.
+			  Third memory resource shall be the host controller
+			  diagnostic memory resource.
+			  4th memory resource shall be the host controller
+			  AXI memory resource.
+			  5th optional memory resource shall be the host
+			  controller MUX memory resource if required.
+- interrupts		: Interrupt-specifier for SATA host controller IRQ.
+- clocks		: Reference to the clock entry.
+- phys			: A list of phandles + phy-specifiers, one for each
+			  entry in phy-names.
+- phy-names		: Should contain:
+  * "sata-phy" for the SATA 6.0Gbps PHY
+
+Optional properties:
+- dma-coherent		: Present if dma operations are coherent
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+
+Example:
+		sataclk: sataclk {
+			compatible = "fixed-clock";
+			#clock-cells = <1>;
+			clock-frequency = <100000000>;
+			clock-output-names = "sataclk";
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
+			clocks = <&sataclk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci-pcie";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>,
+			      <0x0 0x1f237000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
+			clocks = <&sataclk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
diff --git a/Documentation/devicetree/bindings/ata/ata-generic.yaml b/Documentation/devicetree/bindings/ata/ata-generic.yaml
new file mode 100644
index 0000000000..0697927f3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ata-generic.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ata-generic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Parallel ATA Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Generic Parallel ATA controllers supporting PIO modes only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,vexpress-cf
+          - fsl,mpc8349emitx-pata
+      - const: ata-generic
+
+  reg:
+    items:
+      - description: Command interface registers
+      - description: Control interface registers
+
+  reg-shift:
+    enum: [ 1, 2 ]
+
+  interrupts:
+    maxItems: 1
+
+  ata-generic,use16bit:
+    type: boolean
+    description: Use 16-bit accesses instead of 32-bit for data transfers
+
+  pio-mode:
+    description: Maximum ATA PIO transfer mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    compact-flash@1a000 {
+        compatible = "arm,vexpress-cf", "ata-generic";
+        reg = <0x1a000 0x100>,
+              <0x1a100 0xf00>;
+        reg-shift = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
new file mode 100644
index 0000000000..c1d22b3ae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
@@ -0,0 +1,19 @@
+Atmel AT91RM9200 CompactFlash
+
+Required properties:
+- compatible : "atmel,at91rm9200-cf".
+- reg : should specify localbus address and size used.
+- gpios : specifies the gpio pins to control the CF device. Detect
+  and reset gpio's are mandatory while irq and vcc gpio's are
+  optional and may be set to 0 if not present.
+
+Example:
+compact-flash@50000000 {
+	compatible = "atmel,at91rm9200-cf";
+	reg = <0x50000000 0x30000000>;
+	gpios = <&pioC 13 0	/* irq */
+		 &pioC 15 0 	/* detect */
+		 0		/* vcc */
+		 &pioC  5 0	/* reset */
+		>;
+};
diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
new file mode 100644
index 0000000000..9b7ca4759b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 SoC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
+  DWC AHCI SATA v4.10a IP-core.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-ahci
+
+  clocks:
+    items:
+      - description: Peripheral APB bus clock
+      - description: Application AXI BIU clock
+      - description: SATA Ports reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+      - const: ref
+
+  resets:
+    items:
+      - description: Application AXI BIU domain reset
+      - description: SATA Ports clock domain reset
+
+  reset-names:
+    items:
+      - const: arst
+      - const: ref
+
+  ports-implemented:
+    maximum: 0x3
+
+patternProperties:
+  "^sata-port@[0-1]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Tx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Rx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1f050000 {
+      compatible = "baikal,bt1-ahci";
+      reg = <0x1f050000 0x2000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <0 64 4>;
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
+      clock-names = "pclk", "aclk", "ref";
+
+      resets = <&ccu_axi 2>, <&ccu_sys 0>;
+      reset-names = "arst", "ref";
+
+      ports-implemented = <0x3>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+
+      sata-port@1 {
+        reg = <1>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 0000000000..fe7f091e74
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+              - brcm,bcm7445-ahci
+              - brcm,bcm7425-ahci
+              - brcm,bcm63138-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+          - brcm,bcm63138-ahci
+then:
+  properties:
+    resets:
+      maxItems: 1
+    reset-names:
+      enum:
+        - rescal
+        - ahci
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
new file mode 100644
index 0000000000..3bacc8e093
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -0,0 +1,30 @@
+* Compact Flash
+
+The Cavium Compact Flash device is connected to the Octeon Boot Bus,
+and is thus a child of the Boot Bus device.  It can read and write
+industry standard compact flash devices.
+
+Properties:
+- compatible: "cavium,ebt3000-compact-flash";
+
+  Compatibility with many Cavium evaluation boards.
+
+- reg: The base address of the CF chip select banks.  Depending on
+  the device configuration, there may be one or two banks.
+
+- cavium,bus-width: The width of the connection to the CF devices.  Valid
+  values are 8 and 16.
+
+- cavium,true-ide: Optional, if present the CF connection is in True IDE mode.
+
+- cavium,dma-engine-handle: Optional, a phandle for the DMA Engine connected
+  to this device.
+
+Example:
+	compact-flash@5,0 {
+		compatible = "cavium,ebt3000-compact-flash";
+		reg = <5 0 0x10000>, <6 0 0x10000>;
+		cavium,bus-width = <16>;
+		cavium,true-ide;
+		cavium,dma-engine-handle = <&dma0>;
+	};
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 0000000000..b29ce598f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk SATA_REF>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
new file mode 100644
index 0000000000..5290936665
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+    takes two Faraday Technology FTIDE010 PATA controllers and bridges
+    them in different configurations to two SATA ports.
+
+properties:
+  compatible:
+    const: cortina,gemini-sata-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+    description: phandles to the reset lines for both SATA bridges
+
+  reset-names:
+    items:
+      - const: sata0
+      - const: sata1
+
+  clocks:
+    maxItems: 2
+    description: phandles to the compulsory peripheral clocks
+
+  clock-names:
+    items:
+      - const: SATA0_PCLK
+      - const: SATA1_PCLK
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller
+
+  cortina,gemini-ata-muxmode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+      - 2
+      - 3
+    description: |
+      Tell the desired multiplexing mode for the ATA controller and SATA
+      bridges.
+      Mode 0: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata0 slave interface brought out on IDE pads
+      Mode 1: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata1 slave interface brought out on IDE pads
+      Mode 2: ata1 master <-> sata1
+              ata1 slave  <-> sata0
+              ata0 master and slave interfaces brought out on IDE pads
+      Mode 3: ata0 master <-> sata0
+              ata0 slave  <-> sata1
+              ata1 master and slave interfaces brought out on IDE pads
+
+  cortina,gemini-enable-ide-pins:
+    type: boolean
+    description: Enables the PATA to IDE connection.
+      The muxmode setting decides whether ATA0 or ATA1 is brought out,
+      and whether master, slave or both interfaces get brought out.
+
+  cortina,gemini-enable-sata-bridge:
+    type: boolean
+    description: Enables the PATA to SATA bridge inside the Gemnini SoC.
+      The Muxmode decides what PATA blocks will be muxed out and how.
+
+required:
+  - clocks
+  - clock-names
+  - cortina,gemini-ata-muxmode
+  - resets
+  - reset-names
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    sata@46000000 {
+      compatible = "cortina,gemini-sata-bridge";
+      reg = <0x46000000 0x100>;
+      resets = <&rcon 26>, <&rcon 27>;
+      reset-names = "sata0", "sata1";
+      clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+               <&gcc GEMINI_CLK_GATE_SATA1>;
+      clock-names = "SATA0_PCLK", "SATA1_PCLK";
+      syscon = <&syscon>;
+      cortina,gemini-ata-muxmode = <3>;
+      cortina,gemini-enable-ide-pins;
+      cortina,gemini-enable-sata-bridge;
+    };
diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
new file mode 100644
index 0000000000..fa16f3767c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTIDE010 PATA controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This controller is the first Faraday IDE interface block, used in the
+  StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini
+  platform. The controller can do PIO modes 0 through 4, Multi-word DMA
+  (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6.
+
+  On the Gemini platform, this PATA block is accompanied by a PATA to
+  SATA bridge in order to support SATA. This is why a phandle to that
+  controller is compulsory on that platform.
+
+  The timing properties are unique per-SoC, not per-board.
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftide010
+      - items:
+          - const: cortina,gemini-pata
+          - const: faraday,ftide010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: PCLK
+
+  sata:
+    description:
+      phandle to the Gemini PATA to SATA bridge, if available
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: pata-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cortina,gemini-pata
+
+    then:
+      required:
+        - sata
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+
+    ide@63000000 {
+      compatible = "cortina,gemini-pata", "faraday,ftide010";
+      reg = <0x63000000 0x100>;
+      interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+      clock-names = "PCLK";
+      sata = <&sata>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ide-port@0 {
+        reg = <0>;
+      };
+      ide-port@1 {
+        reg = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/fsl-sata.txt b/Documentation/devicetree/bindings/ata/fsl-sata.txt
new file mode 100644
index 0000000000..fd63bb3bec
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/fsl-sata.txt
@@ -0,0 +1,28 @@
+* Freescale 8xxx/3.0 Gb/s SATA nodes
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA port should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains 2 entries, first is
+		 "fsl,CHIP-sata", where CHIP is the processor
+		 (mpc8315, mpc8379, etc.) and the second is
+		 "fsl,pq-sata"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- cell-index        : controller index.
+                          1 for controller @ 0x18000
+                          2 for controller @ 0x19000
+                          3 for controller @ 0x1a000
+                          4 for controller @ 0x1b000
+
+Optional properties:
+- reg               : <registers mapping>
+
+Example:
+	sata@18000 {
+		compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+		reg = <0x18000 0x1000>;
+		cell-index = <1>;
+		interrupts = <2c 8>;
+		interrupt-parent = < &ipic >;
+	};
diff --git a/Documentation/devicetree/bindings/ata/imx-pata.txt b/Documentation/devicetree/bindings/ata/imx-pata.txt
new file mode 100644
index 0000000000..f1172f0018
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/imx-pata.txt
@@ -0,0 +1,16 @@
+* Freescale i.MX PATA Controller
+
+Required properties:
+- compatible: "fsl,imx27-pata"
+- reg: Address range of the PATA Controller
+- interrupts: The interrupt of the PATA Controller
+- clocks: the clocks for the PATA Controller
+
+Example:
+
+	pata: pata@83fe0000 {
+		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+		reg = <0x83fe0000 0x4000>;
+		interrupts = <70>;
+		clocks = <&clks 161>;
+	};
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.yaml b/Documentation/devicetree/bindings/ata/imx-sata.yaml
new file mode 100644
index 0000000000..68ffb97ddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/imx-sata.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/imx-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX AHCI SATA Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+  with some special extensions at integration level.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ahci
+      - fsl,imx6q-ahci
+      - fsl,imx6qp-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: sata clock
+      - description: sata reference clock
+      - description: ahb clock
+
+  clock-names:
+    items:
+      - const: sata
+      - const: sata_ref
+      - const: ahb
+
+  fsl,transmit-level-mV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit voltage level, in millivolts.
+
+  fsl,transmit-boost-mdB:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit boost level, in milli-decibels.
+
+  fsl,transmit-atten-16ths:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: transmit attenuation, in 16ths.
+
+  fsl,receive-eq-mdB:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: receive equalisation, in milli-decibels.
+
+  fsl,no-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: if present, disable spread-spectrum clocking on the SATA link.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@2200000 {
+        compatible = "fsl,imx6q-ahci";
+        reg = <0x02200000 0x4000>;
+        interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_SATA>,
+                 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+                 <&clks IMX6QDL_CLK_AHB>;
+        clock-names = "sata", "sata_ref", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
new file mode 100644
index 0000000000..378692010c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/intel,ixp4xx-compact-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx CompactFlash Card Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The IXP4xx network processors have a CompactFlash interface that presents
+  a CompactFlash card to the system as a true IDE (parallel ATA) device. The
+  device is always connected to the expansion bus of the IXP4xx SoCs using one
+  or two chip select areas and address translating logic on the board. The
+  node must be placed inside a chip select node on the IXP4xx expansion bus.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-compact-flash
+
+  reg:
+    items:
+      - description: Command interface registers
+      - description: Control interface registers
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: pata-common.yaml#
+  - $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus@c4000000 {
+      compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+      reg = <0xc4000000 0x1000>;
+      native-endian;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+      dma-ranges = <0 0x0 0x50000000 0x01000000>, <1 0x0 0x51000000 0x01000000>;
+      ide@1,0 {
+        compatible = "intel,ixp4xx-compact-flash";
+        reg = <1 0x00000000 0x1000>, <1 0x00040000 0x1000>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
new file mode 100644
index 0000000000..b460edd127
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/marvell.txt
@@ -0,0 +1,22 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
+- reg           : Address range of controller
+- interrupts    : Interrupt controller is using
+- nr-ports      : Number of SATA ports in use.
+
+Optional Properties:
+- phys		: List of phandles to sata phys
+- phy-names	: Should be "0", "1", etc, one number per phandle
+
+Example:
+
+	sata@80000 {
+		compatible = "marvell,orion-sata";
+		reg = <0x80000 0x5000>;
+		interrupts = <21>;
+		phys = <&sata_phy0>, <&sata_phy1>;
+		phy-names = "0", "1";
+		nr-ports = <2>;
+	}
diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
new file mode 100644
index 0000000000..3c7a2425f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/nvidia,tegra-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra AHCI SATA Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra124-ahci
+      - nvidia,tegra132-ahci
+      - nvidia,tegra210-ahci
+      - nvidia,tegra186-ahci
+
+  reg:
+    minItems: 2
+    items:
+      - description: AHCI registers
+      - description: SATA configuration and IPFS registers
+      - description: SATA AUX registers
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sata
+      - const: sata-oob
+
+  clocks:
+    maxItems: 2
+
+  reset-names:
+    minItems: 2
+    items:
+      - const: sata
+      - const: sata-cold
+      - const: sata-oob
+
+  resets:
+    minItems: 2
+    maxItems: 3
+
+  iommus:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  interconnects:
+    maxItems: 2
+
+  power-domains:
+    items:
+      - description: SAX power-domain
+
+  phy-names:
+    items:
+      - const: sata-0
+
+  phys:
+    maxItems: 1
+
+  hvdd-supply:
+    description: SATA HVDD regulator supply.
+
+  vddio-supply:
+    description: SATA VDDIO regulator supply.
+
+  avdd-supply:
+    description: SATA AVDD regulator supply.
+
+  target-5v-supply:
+    description: SATA 5V power regulator supply.
+
+  target-12v-supply:
+    description: SATA 12V power regulator supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - reset-names
+  - resets
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-ahci
+              - nvidia,tegra132-ahci
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reset-names:
+          minItems: 3
+        resets:
+          minItems: 3
+      required:
+        - phys
+        - phy-names
+        - hvdd-supply
+        - vddio-supply
+        - avdd-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-ahci
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reset-names:
+          minItems: 3
+        resets:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-ahci
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reset-names:
+          maxItems: 2
+        resets:
+          maxItems: 2
+      required:
+        - iommus
+        - interconnect-names
+        - interconnects
+        - power-domains
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/reset/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sata@70020000 {
+            compatible = "nvidia,tegra210-ahci";
+            reg = <0x70027000 0x00002000>, /* AHCI */
+                  <0x70020000 0x00007000>, /* SATA */
+                  <0x70001100 0x00010000>; /* SATA AUX */
+            interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&tegra_car TEGRA210_CLK_SATA>,
+                     <&tegra_car TEGRA210_CLK_SATA_OOB>;
+            clock-names = "sata", "sata-oob";
+            resets = <&tegra_car 124>,
+                     <&tegra_car 129>,
+                     <&tegra_car 123>;
+            reset-names = "sata", "sata-cold", "sata-oob";
+    };
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
new file mode 100644
index 0000000000..872edc1056
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -0,0 +1,37 @@
+* ARASAN PATA COMPACT FLASH CONTROLLER
+
+Required properties:
+- compatible: "arasan,cf-spear1340"
+- reg: Address range of the CF registers
+- interrupt: Should contain the CF interrupt number
+- clock-frequency: Interface clock rate, in Hz, one of
+       25000000
+       33000000
+       40000000
+       50000000
+       66000000
+       75000000
+      100000000
+      125000000
+      150000000
+      166000000
+      200000000
+
+Optional properties:
+- arasan,broken-udma: if present, UDMA mode is unusable
+- arasan,broken-mwdma: if present, MWDMA mode is unusable
+- arasan,broken-pio: if present, PIO mode is unusable
+- dmas: one DMA channel, as described in bindings/dma/dma.txt
+  required unless both UDMA and MWDMA mode are broken
+- dma-names: the corresponding channel name, must be "data"
+
+Example:
+
+	cf@fc000000 {
+		compatible = "arasan,cf-spear1340";
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+		dmas = <&dma-controller 23>;
+		dma-names = "data";
+	};
diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml
new file mode 100644
index 0000000000..4e867dd4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/pata-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Parallel AT attachment (PATA) controllers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to most Parallel
+  ATA (PATA, also known as IDE) AT attachment storage devices.
+  It doesn't constitute a device tree binding specification by itself but is
+  meant to be referenced by device tree bindings.
+
+  The PATA (IDE) controller-specific device tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  $nodename:
+    pattern: "^ide(@.*)?$"
+    description:
+      Specifies the host controller node. PATA host controller nodes are named
+      "ide".
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^ide-port@[0-1]$":
+    description: |
+      DT nodes for ports connected on the PATA host. The master drive will have
+      ID number 0 and the slave drive will have ID number 1. The PATA port
+      nodes will be named "ide-port".
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          The ID number of the drive port, 0 for the master port and 1 for the
+          slave port.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/ata/qcom-sata.txt b/Documentation/devicetree/bindings/ata/qcom-sata.txt
new file mode 100644
index 0000000000..094de91cd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/qcom-sata.txt
@@ -0,0 +1,48 @@
+* Qualcomm AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible		: compatible list, must contain "generic-ahci"
+- interrupts		: <interrupt mapping for SATA IRQ>
+- reg			: <registers mapping>
+- phys			: Must contain exactly one entry as specified
+			  in phy-bindings.txt
+- phy-names		: Must be "sata-phy"
+
+Required properties for "qcom,ipq806x-ahci" compatible:
+- clocks		: Must contain an entry for each entry in clock-names.
+- clock-names		: Shall be:
+				"slave_iface" - Fabric port AHB clock for SATA
+				"iface" - AHB clock
+				"core" - core clock
+				"rxoob" - RX out-of-band clock
+				"pmalive" - Power Module Alive clock
+- assigned-clocks	: Shall be:
+				SATA_RXOOB_CLK
+				SATA_PMALIVE_CLK
+- assigned-clock-rates	: Shall be:
+				100Mhz (100000000) for SATA_RXOOB_CLK
+				100Mhz (100000000) for SATA_PMALIVE_CLK
+
+Example:
+	sata@29000000 {
+		compatible = "qcom,ipq806x-ahci", "generic-ahci";
+		reg = <0x29000000 0x180>;
+
+		interrupts = <0 209 0x0>;
+
+		clocks = <&gcc SFAB_SATA_S_H_CLK>,
+			 <&gcc SATA_H_CLK>,
+			 <&gcc SATA_A_CLK>,
+			 <&gcc SATA_RXOOB_CLK>,
+			 <&gcc SATA_PMALIVE_CLK>;
+		clock-names = "slave_iface", "iface", "core",
+				"rxoob", "pmalive";
+		assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+		assigned-clock-rates = <100000000>, <100000000>;
+
+		phys = <&sata_phy>;
+		phy-names = "sata-phy";
+	};
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
new file mode 100644
index 0000000000..fe09095547
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Serial-ATA Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,sata-r8a7779      # R-Car H1
+      - items:
+          - enum:
+              - renesas,sata-r8a7742      # RZ/G1H
+              - renesas,sata-r8a7790-es1  # R-Car H2 ES1
+              - renesas,sata-r8a7790      # R-Car H2 other than ES1
+              - renesas,sata-r8a7791      # R-Car M2-W
+              - renesas,sata-r8a7793      # R-Car M2-N
+          - const: renesas,rcar-gen2-sata # generic R-Car Gen2
+      - items:
+          - enum:
+              - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a774e1     # RZ/G2H
+              - renesas,sata-r8a7795      # R-Car H3
+              - renesas,sata-r8a77965     # R-Car M3-N
+          - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,sata-r8a7779
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    sata@ee300000 {
+            compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
+            reg = <0xee300000 0x200000>;
+            interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 815>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 815>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
new file mode 100644
index 0000000000..b5e5767d86
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller for Rockchip devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the Synopsys DWC
+  implementation of the AHCI SATA controller found in Rockchip
+  devices.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+      - const: snps,dwc-ahci
+
+  ports-implemented:
+    const: 1
+
+  sata-port@0:
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        const: 0
+
+    unevaluatedProperties: false
+
+patternProperties:
+  "^sata-port@[1-9a-e]$": false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports-implemented
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+            - const: ref
+            - const: asic
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3568-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata@fe210000 {
+      compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+      reg = <0xfe210000 0x1000>;
+      clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+               <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+               <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+      clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+      interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+      ports-implemented = <0x1>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sata-port@0 {
+        reg = <0>;
+        hba-port-cap = <HBA_PORT_FBSCP>;
+        phys = <&combphy0_ps PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        snps,rx-ts-max = <32>;
+        snps,tx-ts-max = <32>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
new file mode 100644
index 0000000000..58c9342b99
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial AT attachment (SATA) controllers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to most Serial
+  AT attachment (SATA) storage devices. It doesn't constitute a device tree
+  binding specification by itself but is meant to be referenced by device
+  tree bindings.
+
+  The SATA controller-specific device tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  $nodename:
+    pattern: "^sata(@.*)?$"
+    description:
+      Specifies the host controller node. SATA host controller nodes are named
+      "sata"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  dma-coherent: true
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/sata-port'
+    description: |
+      DT nodes for ports connected on the SATA host. The SATA port
+      nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+  sata-port:
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        description:
+          The ID number of the SATA port. Aside with being directly used,
+          each port can have a Port Multiplier attached thus allowing to
+          access more than one drive by means of a single SATA port.
+
+...
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
new file mode 100644
index 0000000000..f23f26a8f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata_highbank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda AHCI SATA Controller
+
+description: |
+  The Calxeda SATA controller mostly conforms to the AHCI interface
+  with some special extensions to add functionality, to map GPIOs for
+  activity LEDs and for mapping the ComboPHYs.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+  calxeda,pre-clocks:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates the number of additional clock cycles to transmit before
+      sending an SGPIO pattern.
+
+  calxeda,post-clocks:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates the number of additional clock cycles to transmit after
+      sending an SGPIO pattern.
+
+  calxeda,led-order:
+    description: Maps port numbers to offsets within the SGPIO bitstream.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  calxeda,port-phys:
+    description: |
+      phandle-combophy and lane assignment, which maps each SATA port to a
+      combophy and a lane within that combophy
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 8
+    items:
+      maxItems: 2
+
+  calxeda,tx-atten:
+    description: |
+      Contains TX attenuation override codes, one per port.
+      The upper 24 bits of each entry are always 0 and thus ignored.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  calxeda,sgpio-gpio:
+    maxItems: 3
+    description: |
+      phandle-gpio bank, bit offset, and default on or off, which indicates
+      that the driver supports SGPIO indicator lights using the indicated
+      GPIOs.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "calxeda,hb-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+        dma-coherent;
+        calxeda,port-phys = <&combophy5 0>, <&combophy0 0>, <&combophy0 1>,
+                             <&combophy0 2>, <&combophy0 3>;
+        calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, <&gpioh 7 1>;
+        calxeda,led-order = <4 0 1 2 3>;
+        calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+        calxeda,pre-clocks = <10>;
+        calxeda,post-clocks = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 0000000000..34c5bf65b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: PHY Transmit Clock
+          const: asic
+        - description: PHY Receive Clock
+          const: rbc
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 0000000000..4c848fcb5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+select:
+  properties:
+    compatible:
+      enum:
+        - snps,dwc-ahci
+        - snps,spear-ahci
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
new file mode 100644
index 0000000000..5d02bd032a
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/arm,versatile-lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Character LCD
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rob Herring <robh@kernel.org>
+
+description:
+  This binding defines the character LCD interface found on ARM Versatile AB
+  and PB reference platforms.
+
+properties:
+  compatible:
+    const: arm,versatile-lcd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd@10008000 {
+            compatible = "arm,versatile-lcd";
+            reg = <0x10008000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
new file mode 100644
index 0000000000..fde07e4b11
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hitachi HD44780 Character LCD Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+
+description:
+  The Hitachi HD44780 Character LCD Controller is commonly used on character
+  LCDs that can display one or more lines of text. It exposes an M6800 bus
+  interface, which can be used in either 4-bit or 8-bit mode. By using a
+  GPIO expander it is possible to use the driver with one of the popular I2C
+  expander boards based on the PCF8574 available for these displays. For
+  an example see below.
+
+properties:
+  compatible:
+    const: hit,hd44780
+
+  data-gpios:
+    description:
+      GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or
+      DB4-DB7 (4-bit mode) of the LCD Controller's bus interface.
+    oneOf:
+      - maxItems: 4
+      - maxItems: 8
+
+  enable-gpios:
+    description:
+      GPIO pin connected to the "E" (Enable) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rs-gpios:
+    description:
+      GPIO pin connected to the "RS" (Register Select) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  rw-gpios:
+    description:
+      GPIO pin connected to the "RW" (Read/Write) signal line of the LCD
+      Controller's bus interface.
+    maxItems: 1
+
+  backlight-gpios:
+    description: GPIO pin used for enabling the LCD's backlight.
+    maxItems: 1
+
+  display-height-chars:
+    description: Height of the display, in character cells,
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+  internal-buffer-width:
+    description:
+      Internal buffer width (default is 40 for displays with 1 or 2 lines, and
+      display-width-chars for displays with more than 2 lines).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 64
+
+required:
+  - compatible
+  - data-gpios
+  - enable-gpios
+  - rs-gpios
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    auxdisplay {
+            compatible = "hit,hd44780";
+
+            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                         <&hc595 1 GPIO_ACTIVE_HIGH>,
+                         <&hc595 2 GPIO_ACTIVE_HIGH>,
+                         <&hc595 3 GPIO_ACTIVE_HIGH>;
+            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+
+            display-height-chars = <2>;
+            display-width-chars = <16>;
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pcf8574: pcf8574@27 {
+                    compatible = "nxp,pcf8574";
+                    reg = <0x27>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+            };
+    };
+    hd44780 {
+            compatible = "hit,hd44780";
+            display-height-chars = <2>;
+            display-width-chars  = <16>;
+            data-gpios = <&pcf8574 4 0>,
+                         <&pcf8574 5 0>,
+                         <&pcf8574 6 0>,
+                         <&pcf8574 7 0>;
+            enable-gpios = <&pcf8574 2 0>;
+            rs-gpios = <&pcf8574 0 0>;
+            rw-gpios = <&pcf8574 1 0>;
+            backlight-gpios = <&pcf8574 3 0>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
new file mode 100644
index 0000000000..be95f6b97b
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/holtek,ht16k33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holtek HT16K33 RAM mapping 16*8 LED controller with keyscan
+
+maintainers:
+  - Robin van der Gracht <robin@protonic.nl>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adafruit,3108  # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
+              - adafruit,3130  # 0.54" Quad Alphanumeric FeatherWing Display (Red)
+          - const: holtek,ht16k33
+
+      - const: holtek,ht16k33     # Generic 16*8 LED controller with dot-matrix display
+
+  reg:
+    maxItems: 1
+
+  refresh-rate-hz:
+    maxItems: 1
+    description: Display update interval in Hertz for dot-matrix displays
+
+  interrupts:
+    maxItems: 1
+
+  debounce-delay-ms:
+    maxItems: 1
+    description: Debouncing interval time in milliseconds
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Disable keyrepeat
+
+  default-brightness-level:
+    minimum: 1
+    maximum: 16
+    default: 16
+    description: Initial brightness level
+
+  led:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      const: holtek,ht16k33
+then:
+  required:
+    - refresh-rate-hz
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ht16k33: ht16k33@70 {
+                    compatible = "holtek,ht16k33";
+                    reg = <0x70>;
+                    refresh-rate-hz = <20>;
+                    interrupt-parent = <&gpio4>;
+                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+                    debounce-delay-ms = <50>;
+                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                                   <MATRIX_KEY(3, 0, KEY_F8)>,
+                                   <MATRIX_KEY(4, 0, KEY_F10)>,
+                                   <MATRIX_KEY(5, 0, KEY_F4)>,
+                                   <MATRIX_KEY(6, 0, KEY_F2)>,
+                                   <MATRIX_KEY(2, 1, KEY_F5)>,
+                                   <MATRIX_KEY(3, 1, KEY_F7)>,
+                                   <MATRIX_KEY(4, 1, KEY_F9)>,
+                                   <MATRIX_KEY(5, 1, KEY_F3)>,
+                                   <MATRIX_KEY(6, 1, KEY_F1)>;
+
+                    led {
+                            color = <LED_COLOR_ID_RED>;
+                            function = LED_FUNCTION_BACKLIGHT;
+                            linux,default-trigger = "backlight";
+                    };
+            };
+      };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
new file mode 100644
index 0000000000..1899b23de7
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/img,ascii-lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASCII LCD displays on Imagination Technologies boards
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - img,boston-lcd
+      - mti,malta-lcd
+      - mti,sead3-lcd
+
+  reg:
+    maxItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset in bytes to the LCD registers within the system controller
+
+required:
+  - compatible
+
+oneOf:
+  - required:
+      - reg
+  - required:
+      - offset
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: img,boston-lcd
+then:
+  required:
+    - reg
+else:
+  required:
+    - offset
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd: lcd@17fff000 {
+            compatible = "img,boston-lcd";
+            reg = <0x17fff000 0x8>;
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml
new file mode 100644
index 0000000000..a1d55a2634
--- /dev/null
+++ b/Documentation/devicetree/bindings/auxdisplay/modtronix,lcd2s.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/modtronix,lcd2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Modtronix engineering LCD2S Character LCD Display
+
+maintainers:
+  - Lars Poeschel <poeschel@lemonage.de>
+
+description:
+  The LCD2S is a Character LCD Display manufactured by Modtronix Engineering.
+  The display supports a serial I2C and SPI interface. The driver currently
+  only supports the I2C interface.
+
+properties:
+  compatible:
+    const: modtronix,lcd2s
+
+  reg:
+    maxItems: 1
+    description:
+      I2C bus address of the display.
+
+  display-height-chars:
+    description: Height of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+
+  display-width-chars:
+    description: Width of the display, in character cells.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 16
+    maximum: 20
+
+required:
+  - compatible
+  - reg
+  - display-height-chars
+  - display-width-chars
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lcd2s: auxdisplay@28 {
+        compatible = "modtronix,lcd2s";
+        reg = <0x28>;
+        display-height-chars = <4>;
+        display-width-chars = <20>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt
new file mode 100644
index 0000000000..9cde570159
--- /dev/null
+++ b/Documentation/devicetree/bindings/board/fsl-board.txt
@@ -0,0 +1,81 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
+* Board Control and Status (BCSR)
+
+Required properties:
+
+ - compatible : Should be "fsl,<board>-bcsr"
+ - reg : Offset and length of the register set for the device
+
+Example:
+
+	bcsr@f8000000 {
+		compatible = "fsl,mpc8360mds-bcsr";
+		reg = <f8000000 8000>;
+	};
+
+* Freescale on-board FPGA
+
+This is the memory-mapped registers for on board FPGA.
+
+Required properties:
+- compatible: should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-pixis", or
+	"fsl,<board>-fpga", "fsl,fpga-qixis"
+- reg: should contain the address and the length of the FPGA register set.
+
+Optional properties:
+- interrupts: should specify event (wakeup) IRQ.
+
+Example (P1022DS):
+
+	 board-control@3,0 {
+		 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		 reg = <3 0 0x30>;
+		 interrupt-parent = <&mpic>;
+		 interrupts = <8 8 0 0>;
+	 };
+
+Example (LS2080A-RDB):
+
+        cpld@3,0 {
+                compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis";
+                reg = <0x3 0 0x10000>;
+        };
+
+* Freescale on-board FPGA connected on I2C bus
+
+Some Freescale boards like BSC9132QDS have on board FPGA connected on
+the i2c bus.
+
+Required properties:
+- compatible: Should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
+- reg: Should contain the address of the FPGA
+
+Example:
+	fpga: fpga@66 {
+		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+		reg = <0x66>;
+	};
+
+* Freescale on-board CPLD
+
+Some Freescale boards like T1040RDB have an on board CPLD connected.
+
+Required properties:
+- compatible: Should be a board-specific string like "fsl,<board>-cpld"
+  Example:
+	"fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld"
+- reg: should describe CPLD registers
+
+Example:
+	cpld@3,0 {
+		compatible = "fsl,t1040rdb-cpld";
+		reg = <3 0 0x300>;
+	};
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
new file mode 100644
index 0000000000..9845a187bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 Display Engine Bus
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  $nodename:
+    pattern: "^bus(@[0-9a-f]+)?$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun50i-a64-de2
+      - items:
+          - const: allwinner,sun50i-h6-de3
+          - const: allwinner,sun50i-a64-de2
+
+  reg:
+    maxItems: 1
+
+  allwinner,sram:
+    description:
+      The SRAM that needs to be claimed to access the display engine
+      bus.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
+
+  ranges: true
+
+patternProperties:
+  # All other properties should be child nodes with unit-address and 'reg'
+  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - allwinner,sram
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@1000000 {
+        compatible = "allwinner,sun50i-a64-de2";
+        reg = <0x1000000 0x400000>;
+        allwinner,sram = <&de2_sram 1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x1000000 0x400000>;
+
+        display_clocks: clock@0 {
+            compatible = "allwinner,sun50i-a64-de2-clk";
+            reg = <0x0 0x100000>;
+            clocks = <&ccu 52>, <&ccu 99>;
+            clock-names = "bus", "mod";
+            resets = <&ccu 30>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
new file mode 100644
index 0000000000..24c939f590
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 RSB
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a23-rsb
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-rsb
+              - allwinner,sun50i-h616-rsb
+          - const: allwinner,sun8i-a23-rsb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 20000000
+
+patternProperties:
+  "^.*@[0-9a-fA-F]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+examples:
+  - |
+    rsb@1f03400 {
+        compatible = "allwinner,sun8i-a23-rsb";
+        reg = <0x01f03400 0x400>;
+        interrupts = <0 39 4>;
+        clocks = <&apb0_gates 3>;
+        clock-frequency = <3000000>;
+        resets = <&apb0_rst 3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@3e3 {
+            reg = <0x3e3>;
+
+            /* ... */
+        };
+    };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
new file mode 100644
index 0000000000..47227427c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrator/AP Logic Module extension bus
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: The Integrator/AP is a prototyping platform and as such has a
+  site for stacking up to four logic modules (LM) designed specifically for
+  use with this platform. A special system controller register can be read to
+  determine if a logic module is connected at index 0, 1, 2 or 3. The logic
+  module connector is described in this binding. The logic modules per se
+  then have their own specific per-module bindings and they will be described
+  as subnodes under this logic module extension bus.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    items:
+      - const: arm,integrator-ap-lm
+
+  ranges: true
+  dma-ranges: true
+
+patternProperties:
+  "^bus(@[0-9a-f]*)?$":
+    description: Nodes on the Logic Module bus represent logic modules
+      and are named with bus. The first module is at 0xc0000000, the second
+      at 0xd0000000 and so on until the top of the memory of the system at
+      0xffffffff. All information about the memory used by the module is
+      in ranges and dma-ranges.
+    type: object
+
+    required:
+      - compatible
+
+required:
+  - compatible
+
+examples:
+  - |
+    bus@c0000000 {
+      compatible = "arm,integrator-ap-lm";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0xc0000000 0xc0000000 0x40000000>;
+      dma-ranges;
+
+      bus@c0000000 {
+        compatible = "simple-bus";
+        ranges = <0x00000000 0xc0000000 0x10000000>;
+        /* The Logic Modules sees the Core Module 0 RAM @80000000 */
+        dma-ranges = <0x00000000 0x80000000 0x10000000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        serial@100000 {
+          compatible = "arm,pl011", "arm,primecell";
+          reg = <0x00100000 0x1000>;
+          interrupts-extended = <&impd1_vic 1>;
+        };
+
+        impd1_vic: interrupt-controller@3000000 {
+          compatible = "arm,pl192-vic";
+          interrupt-controller;
+          #interrupt-cells = <1>;
+          reg = <0x03000000 0x1000>;
+          valid-mask = <0x00000bff>;
+          interrupts-extended = <&pic 9>;
+        };
+      };
+    };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
new file mode 100644
index 0000000000..2894256c97
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Advanced High-Performance Bus Controller (AHBC)
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description: |
+  Advanced High-performance Bus Controller (AHBC) supports plenty of mechanisms
+  including a priority arbiter, an address decoder and a data multiplexer
+  to control the overall operations of Advanced High-performance Bus (AHB).
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-ahbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ahbc@1e600000 {
+        compatible = "aspeed,ast2600-ahbc";
+        reg = <0x1e600000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
new file mode 100644
index 0000000000..37ba3337f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 APB-bus
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI Interconnect
+  which routes them to the AXI-APB bridge. This interface is a single master
+  multiple slaves bus in turn serializing IO accesses and routing them to the
+  addressed APB slave devices. In case of any APB protocol collisions, slave
+  device not responding on timeout an IRQ is raised with an erroneous address
+  reported to the APB terminator (APB Errors Handler Block).
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: baikal,bt1-apb
+
+  reg:
+    items:
+      - description: APB EHB MMIO registers
+      - description: APB MMIO region with no any device mapped
+
+  reg-names:
+    items:
+      - const: ehb
+      - const: nodev
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  resets:
+    items:
+      - description: APB domain reset line
+
+  reset-names:
+    items:
+      - const: prst
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    bus@1f059000 {
+      compatible = "baikal,bt1-apb", "simple-bus";
+      reg = <0x1f059000 0x1000>,
+            <0x1d000000 0x2040000>;
+      reg-names = "ehb", "nodev";
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      ranges;
+
+      interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&ccu_sys 1>;
+      clock-names = "pclk";
+
+      resets = <&ccu_sys 1>;
+      reset-names = "prst";
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
new file mode 100644
index 0000000000..4ac78b44e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 AXI-bus
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all
+  high-speed peripheral IP-cores with RAM controller and with MIPS P5600
+  cores. Traffic arbitration is done by means of DW AXI Interconnect (so
+  called AXI Main Interconnect) routing IO requests from one block to
+  another: from CPU to SoC peripherals and between some SoC peripherals
+  (mostly between peripheral devices and RAM, but also between DMA and
+  some peripherals). In case of any protocol error, device not responding
+  an IRQ is raised and a faulty situation is reported to the AXI EHB
+  (Errors Handler Block) embedded on top of the DW AXI Interconnect and
+  accessible by means of the Baikal-T1 System Controller.
+
+allOf:
+  - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: baikal,bt1-axi
+
+  reg:
+    minItems: 1
+    items:
+      - description: Synopsys DesignWare AXI Interconnect QoS registers
+      - description: AXI EHB MMIO system controller registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: qos
+      - const: ehb
+
+  '#interconnect-cells':
+    const: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the Baikal-T1 System Controller DT node
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Interconnect uplink reference clock
+
+  clock-names:
+    items:
+      - const: aclk
+
+  resets:
+    items:
+      - description: Main Interconnect reset line
+
+  reset-names:
+    items:
+      - const: arst
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - syscon
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    bus@1f05a000 {
+      compatible = "baikal,bt1-axi", "simple-bus";
+      reg = <0x1f05a000 0x1000>,
+            <0x1f04d110 0x8>;
+      reg-names = "qos", "ehb";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      #interconnect-cells = <1>;
+
+      syscon = <&syscon>;
+
+      ranges;
+
+      interrupts = <GIC_SHARED 127 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&ccu_axi 0>;
+      clock-names = "aclk";
+
+      resets = <&ccu_axi 0>;
+      reset-names = "arst";
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt
new file mode 100644
index 0000000000..edd44d8021
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt
@@ -0,0 +1,53 @@
+Driver for ARM AXI Bus with Broadcom Plugins (bcma)
+
+Required properties:
+
+- compatible : brcm,bus-axi
+
+- reg : iomem address range of chipcommon core
+
+The cores on the AXI bus are automatically detected by bcma with the
+memory ranges they are using and they get registered afterwards.
+Automatic detection of the IRQ number is not working on
+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
+them manually through device tree. Use an interrupt-map to specify the
+IRQ used by the devices on the bus. The first address is just an index,
+because we do not have any special register.
+
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
+detected (e.g. IRQ numbers). Also some of the cores may be responsible
+for extra things, e.g. ChipCommon providing access to the GPIO chip.
+
+Example:
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
new file mode 100644
index 0000000000..3aaefdbe36
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom GISB bus Arbiter controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7445-gisb-arb  # for other 28nm chips
+          - const: brcm,gisb-arb
+      - items:
+          - enum:
+              - brcm,bcm7278-gisb-arb  # for V7 28nm chips
+              - brcm,bcm7435-gisb-arb  # for newer 40nm chips
+              - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
+              - brcm,bcm7038-gisb-arb  # for 130nm chips
+              - brcm,gisb-arb          # fallback compatible
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: timeout interrupt line
+      - description: target abort interrupt line
+      - description: breakpoint interrupt line
+
+  brcm,gisb-arb-master-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      32-bits wide bitmask used to specify which GISB masters are valid at the
+      system level
+
+  brcm,gisb-arb-master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      String list of the literal name of the GISB masters. Should match the
+      number of bits set in brcm,gisb-master-mask and the order in which they
+      appear from MSB to LSB.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gisb-arb@f0400000 {
+      compatible = "brcm,gisb-arb";
+      reg = <0xf0400000 0x800>;
+      interrupts = <0>, <2>;
+      interrupt-parent = <&sun_l2_intc>;
+      brcm,gisb-arb-master-mask = <0x7>;
+      brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
new file mode 100644
index 0000000000..7e1ffc5510
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
@@ -0,0 +1,229 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
+  sitting together with the PHYs.  It is not the same as the MSI bus coming
+  from i.MX8 System Controller Unit (SCU) which is used to control power,
+  clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
+
+  i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
+  that is, MSI clock and AHB clock, need to be enabled so that peripherals
+  connected to the bus can be accessed. Also, the bus is part of a power
+  domain. The power domain needs to be enabled before the peripherals can
+  be accessed.
+
+  Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
+  like I2C controller, PWM controller, MIPI DSI controller and Control and
+  Status Registers (CSR) module, are accessed through the bus.
+
+  The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
+  pixel link MSI bus controller and does not allow SCFW user to control it.
+  So, the controller's registers cannot be accessed by SCFW user. Hence,
+  the interrupts generated by the controller don't make any sense from SCFW
+  user's point of view.
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'simple-pm-bus'.
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+      - const: simple-pm-bus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master gated clock from system
+      - description: AHB clock
+
+  clock-names:
+    items:
+      - const: msi
+      - const: ahb
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Devices attached to the bus
+    type: object
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    bus@56200000 {
+        compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
+        reg = <0x56200000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&dc0_irqsteer>;
+        interrupts = <320>;
+        ranges;
+        clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
+                 <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "msi", "ahb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        syscon@56221000 {
+            compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+            reg = <0x56221000 0x1000>;
+            clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+            clock-names = "ipg";
+
+            pxl2dpi {
+                compatible = "fsl,imx8qxp-pxl2dpi";
+                fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+                power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0>;
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+
+                    port@1 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <1>;
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+                };
+            };
+
+            ldb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx8qxp-ldb";
+                clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                         <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+                clock-names = "pixel", "bypass";
+                power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+                channel@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+
+                channel@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+            };
+        };
+
+        clock-controller@56223004 {
+            compatible = "fsl,imx8qxp-lpcg";
+            reg = <0x56223004 0x4>;
+            #clock-cells = <1>;
+            clocks = <&mipi_lvds_0_ipg_clk>;
+            clock-indices = <IMX_LPCG_CLK_4>;
+            clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+
+        phy@56228300 {
+            compatible = "fsl,imx8qxp-mipi-dphy";
+            reg = <0x56228300 0x100>;
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+            clock-names = "phy_ref";
+            #phy-cells = <0>;
+            fsl,syscon = <&mipi_lvds_0_csr>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
new file mode 100644
index 0000000000..d42dbb0bbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Shared Peripherals Bus Interface
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  A simple bus enabling access to shared peripherals.
+
+  The "spba-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification.  It is an extension of
+  "simple-bus" because the SDMA controller uses this compatible flag to
+  determine which peripherals are available to it and the range over which
+  the SDMA can access.  There are no special clocks for the bus, because
+  the SDMA controller itself has its interrupt and clock assignments.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,spba-bus
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^spba-bus(@[0-9a-f]+)?$"
+
+  compatible:
+    items:
+      - const: fsl,spba-bus
+      - const: simple-bus
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    spba-bus@30000000 {
+        compatible = "fsl,spba-bus", "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x30000000 0x100000>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
new file mode 100644
index 0000000000..e7f502070d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -0,0 +1,117 @@
+Device tree bindings for i.MX Wireless External Interface Module (WEIM)
+
+The term "wireless" does not imply that the WEIM is literally an interface
+without wires. It simply means that this module was originally designed for
+wireless and mobile applications that use low-power technology.
+
+The actual devices are instantiated from the child nodes of a WEIM node.
+
+Required properties:
+
+ - compatible:		Should contain one of the following:
+			  "fsl,imx1-weim"
+			  "fsl,imx27-weim"
+			  "fsl,imx51-weim"
+			  "fsl,imx50-weim"
+			  "fsl,imx6q-weim"
+ - reg:			A resource specifier for the register space
+			(see the example below)
+ - clocks:		the clock, see the example below.
+ - #address-cells:	Must be set to 2 to allow memory address translation
+ - #size-cells:		Must be set to 1 to allow CS address passing
+ - ranges:		Must be set up to reflect the memory layout with four
+			integer values for each chip-select line in use:
+
+			   <cs-number> 0 <physical address of mapping> <size>
+
+Optional properties:
+
+ - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+			devices, it should be the phandle to the system General
+			Purpose Register controller that contains WEIM CS GPR
+			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
+			should be set up as one of the following 4 possible
+			values depending on the CS space configuration.
+
+			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+			---------------------------------------------
+				05	    128M     0M     0M     0M
+				033          64M    64M     0M     0M
+				0113         64M    32M    32M     0M
+				01111        32M    32M    32M    32M
+
+			In case that the property is absent, the reset value or
+			what bootloader sets up in IOMUXC_GPR1[11:0] will be
+			used.
+
+ - fsl,burst-clk-enable	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+			devices, the presence of this property indicates that
+			the weim bus should operate in Burst Clock Mode.
+
+ - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
+			Without this option Burst Clock will output clock
+			only when necessary. This takes effect only if
+			"fsl,burst-clk-enable" is set.
+
+Timing property for child nodes. It is mandatory, not optional.
+
+ - fsl,weim-cs-timing:	The timing array, contains timing values for the
+			child node. We get the CS indexes from the address
+			ranges in the child node's "reg" property.
+			The number of registers depends on the selected chip:
+			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
+			registers: CSxU, CSxL.
+			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
+			there are three registers: CSCRxU, CSCRxL, CSCRxA.
+			For i.MX50, i.MX53 ("fsl,imx50-weim"),
+			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
+			there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
+			CSxRCR2, CSxWCR1, CSxWCR2.
+
+Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
+
+	weim: weim@21b8000 {
+		compatible = "fsl,imx6q-weim";
+		reg = <0x021b8000 0x4000>;
+		clocks = <&clks 196>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x08000000>;
+		fsl,weim-cs-gpr = <&gpr>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+					0x0000c000 0x1404a38e 0x00000000>;
+		};
+	};
+
+Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
+
+In this case, both chip select 0 and 1 will be configured with the same timing
+array values.
+
+	weim: weim@21b8000 {
+		compatible = "fsl,imx6q-weim";
+		reg = <0x021b8000 0x4000>;
+		clocks = <&clks 196>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x02000000
+			  1 0 0x0a000000 0x02000000
+			  2 0 0x0c000000 0x02000000
+			  3 0 0x0e000000 0x02000000>;
+		fsl,weim-cs-gpr = <&gpr>;
+
+		acme@0 {
+			compatible = "acme,whatever";
+			reg = <0 0 0x100>, <0 0x400000 0x800>,
+				<1 0x400000 0x800>;
+			fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
+				0x00000000 0xa0000240 0x00000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
new file mode 100644
index 0000000000..a8d40c766d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/microsoft,vmbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsoft Hyper-V VMBus
+
+maintainers:
+  - Saurabh Sengar <ssengar@linux.microsoft.com>
+
+description:
+  VMBus is a software bus that implement the protocols for communication
+  between the root or host OS and guest OSs (virtual machines).
+
+properties:
+  compatible:
+    const: microsoft,vmbus
+
+  ranges: true
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        bus {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            ranges;
+
+            vmbus@ff0000000 {
+                compatible = "microsoft,vmbus";
+                #address-cells = <2>;
+                #size-cells = <1>;
+                ranges = <0x0f 0xf0000000 0x0f 0xf0000000 0x10000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt
new file mode 100644
index 0000000000..fb50fc8653
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/moxtet.txt
@@ -0,0 +1,46 @@
+Turris Mox module status and configuration bus (over SPI)
+
+Required properties:
+ - compatible		: Should be "cznic,moxtet"
+ - #address-cells	: Has to be 1
+ - #size-cells		: Has to be 0
+ - spi-cpol		: Required inverted clock polarity
+ - spi-cpha		: Required shifted clock phase
+ - interrupts		: Must contain reference to the shared interrupt line
+ - interrupt-controller	: Required
+ - #interrupt-cells	: Has to be 1
+
+For other required and optional properties of SPI slave nodes please refer to
+../spi/spi-bus.txt.
+
+Required properties of subnodes:
+ - reg			: Should be position on the Moxtet bus (how many Moxtet
+			  modules are between this module and CPU module, so
+			  either 0 or a positive integer)
+
+The driver finds the devices connected to the bus by itself, but it may be
+needed to reference some of them from other parts of the device tree. In that
+case the devices can be defined as subnodes of the moxtet node.
+
+Example:
+
+	moxtet@1 {
+		compatible = "cznic,moxtet";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		moxtet_sfp: gpio@0 {
+			compatible = "cznic,moxtet-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+		}
+	};
diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
new file mode 100644
index 0000000000..6a7b26b049
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/mti,mips-cdmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Common Device Memory Map
+
+description: |
+  Defines a location of the MIPS Common Device Memory Map registers.
+
+maintainers:
+  - James Hogan <jhogan@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cdmm
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CDMM registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cdmm@1bde8000 {
+      compatible = "mti,mips-cdmm";
+      reg = <0x1bde8000 0x8000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
new file mode 100644
index 0000000000..f2ab7fd013
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
@@ -0,0 +1,276 @@
+
+* Marvell MBus
+
+Required properties:
+
+- compatible:	 Should be set to one of the following:
+		 marvell,armada370-mbus
+		 marvell,armadaxp-mbus
+		 marvell,armada375-mbus
+		 marvell,armada380-mbus
+		 marvell,kirkwood-mbus
+		 marvell,dove-mbus
+		 marvell,orion5x-88f5281-mbus
+		 marvell,orion5x-88f5182-mbus
+		 marvell,orion5x-88f5181-mbus
+		 marvell,orion5x-88f6183-mbus
+		 marvell,mv78xx0-mbus
+
+- address-cells: Must be '2'. The first cell for the MBus ID encoding,
+                 the second cell for the address offset within the window.
+
+- size-cells:    Must be '1'.
+
+- ranges:        Must be set up to provide a proper translation for each child.
+	         See the examples below.
+
+- controller:    Contains a single phandle referring to the MBus controller
+                 node. This allows to specify the node that contains the
+		 registers that control the MBus, which is typically contained
+		 within the internal register window (see below).
+
+Optional properties:
+
+- pcie-mem-aperture:	This optional property contains the aperture for
+			the memory region of the PCIe driver.
+			If it's defined, it must encode the base address and
+			size for the address decoding windows allocated for
+			the PCIe memory region.
+
+- pcie-io-aperture:	Just as explained for the above property, this
+			optional property contains the aperture for the
+			I/O region of the PCIe driver.
+
+* Marvell MBus controller
+
+Required properties:
+
+- compatible:	Should be set to "marvell,mbus-controller".
+
+- reg:          Device's register space.
+		Two or three entries are expected (see the examples below):
+		the first one controls the devices decoding window,
+		the second one controls the SDRAM decoding window and
+		the third controls the MBus bridge (only with the
+		marvell,armada370-mbus and marvell,armadaxp-mbus
+		compatible strings)
+
+Example:
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		internal-regs {
+			compatible = "simple-bus";
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			/* more children ...*/
+		};
+	};
+
+** MBus address decoding window specification
+
+The MBus children address space is comprised of two cells: the first one for
+the window ID and the second one for the offset within the window.
+In order to allow to describe valid and non-valid window entries, the
+following encoding is used:
+
+  0xSIAA0000 0x00oooooo
+
+Where:
+
+  S = 0x0 for a MBus valid window
+  S = 0xf for a non-valid window (see below)
+
+If S = 0x0, then:
+
+   I = 4-bit window target ID
+  AA = windpw attribute
+
+If S = 0xf, then:
+
+   I = don't care
+   AA = 1 for internal register
+
+Following the above encoding, for each ranges entry for a MBus valid window
+(S = 0x0), an address decoding window is allocated. On the other side,
+entries for translation that do not correspond to valid windows (S = 0xf)
+are skipped.
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		ranges = <0xf0010000 0 0 0xd0000000 0x100000
+			  0x01e00000 0 0 0xfff00000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <0x01e00000 0 0x100000>;
+		};
+
+		/* other children */
+		...
+
+		internal-regs {
+			compatible = "simple-bus";
+			ranges = <0 0xf0010000 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			/* more children ...*/
+		};
+	};
+
+In the shown example, the translation entry in the 'ranges' property is what
+makes the MBus driver create a static decoding window for the corresponding
+given child device. Note that the binding does not require child nodes to be
+present. Of course, child nodes are needed to probe the devices.
+
+Since each window is identified by its target ID and attribute ID there's
+a special macro that can be use to simplify the translation entries:
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+Using this macro, the above example would be:
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			   MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		/* other children */
+		...
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			/* other children */
+			...
+		};
+	};
+
+
+** About the window base address
+
+Remember the MBus controller allows a great deal of flexibility for choosing
+the decoding window base address. When planning the device tree layout it's
+possible to choose any address as the base address, provided of course there's
+a region large enough available, and with the required alignment.
+
+Yet in other words: there's nothing preventing us from setting a base address
+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
+unused.
+
+** Window allocation policy
+
+The mbus-node ranges property defines a set of mbus windows that are expected
+to be set by the operating system and that are guaranteed to be free of overlaps
+with one another or with the system memory ranges.
+
+Each entry in the property refers to exactly one window. If the operating system
+chooses to use a different set of mbus windows, it must ensure that any address
+translations performed from downstream devices are adapted accordingly.
+
+The operating system may insert additional mbus windows that do not conflict
+with the ones listed in the ranges, e.g. for mapping PCIe devices.
+As a special case, the internal register window must be set up by the boot
+loader at the address listed in the ranges property, since access to that region
+is needed to set up the other windows.
+
+** Example
+
+See the example below, where a more complete device tree is shown:
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+		controller = <&mbusc>;
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000   /* internal-regs */
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
+
+			/* NOR */
+			nor {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
+				0x81000800 0 0          MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
+
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+			};
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+			};
+
+			interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
new file mode 100644
index 0000000000..c1e7062179
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
@@ -0,0 +1,128 @@
+Device tree bindings for NVIDIA Tegra Generic Memory Interface bus
+
+The Generic Memory Interface bus enables memory transfers between internal and
+external memory. Can be used to attach various high speed devices such as
+synchronous/asynchronous NOR, FPGA, UARTS and more.
+
+The actual devices are instantiated from the child nodes of a GMI node.
+
+Required properties:
+ - compatible : Should contain one of the following:
+        For Tegra20 must contain "nvidia,tegra20-gmi".
+        For Tegra30 must contain "nvidia,tegra30-gmi".
+ - reg: Should contain GMI controller registers location and length.
+ - clocks: Must contain an entry for each entry in clock-names.
+ - clock-names: Must include the following entries: "gmi"
+ - resets : Must contain an entry for each entry in reset-names.
+ - reset-names : Must include the following entries: "gmi"
+ - #address-cells: The number of cells used to represent physical base
+   addresses in the GMI address space. Should be 2.
+ - #size-cells: The number of cells used to represent the size of an address
+   range in the GMI address space. Should be 1.
+ - ranges: Must be set up to reflect the memory layout with three integer values
+   for each chip-select line in use (only one entry is supported, see below
+   comments):
+   <cs-number> <offset> <physical address of mapping> <size>
+
+Note that the GMI controller does not have any internal chip-select address
+decoding, because of that chip-selects either need to be managed via software
+or by employing external chip-select decoding logic.
+
+If external chip-select logic is used to support multiple devices it is assumed
+that the devices use the same timing and so are probably the same type. It also
+assumes that they can fit in the 256MB address range. In this case only one
+child device is supported which represents the active chip-select line, see
+examples for more insight.
+
+The chip-select number is decoded from the child nodes second address cell of
+'ranges' property, if 'ranges' property is not present or empty chip-select will
+then be decoded from the first cell of the 'reg' property.
+
+Optional child cs node properties:
+
+ - nvidia,snor-data-width-32bit: Use 32bit data-bus, default is 16bit.
+ - nvidia,snor-mux-mode: Enable address/data MUX mode.
+ - nvidia,snor-rdy-active-before-data: Assert RDY signal one cycle before data.
+   If omitted it will be asserted with data.
+ - nvidia,snor-rdy-active-high: RDY signal is active high
+ - nvidia,snor-adv-active-high: ADV signal is active high
+ - nvidia,snor-oe-active-high: WE/OE signal is active high
+ - nvidia,snor-cs-active-high: CS signal is active high
+
+  Note that there is some special handling for the timing values.
+  From Tegra TRM:
+  Programming 0 means 1 clock cycle: actual cycle = programmed cycle + 1
+
+ - nvidia,snor-muxed-width: Number of cycles MUX address/data asserted on the
+   bus. Valid values are 0-15, default is 1
+ - nvidia,snor-hold-width: Number of cycles CE stays asserted after the
+   de-assertion of WR_N (in case of SLAVE/MASTER Request) or OE_N
+   (in case of MASTER Request). Valid values are 0-15, default is 1
+ - nvidia,snor-adv-width: Number of cycles during which ADV stays asserted.
+   Valid values are 0-15, default is 1.
+ - nvidia,snor-ce-width: Number of cycles before CE is asserted.
+   Valid values are 0-15, default is 4
+ - nvidia,snor-we-width: Number of cycles during which WE stays asserted.
+   Valid values are 0-15, default is 1
+ - nvidia,snor-oe-width: Number of cycles during which OE stays asserted.
+   Valid values are 0-255, default is 1
+ - nvidia,snor-wait-width: Number of cycles before READY is asserted.
+   Valid values are 0-255, default is 3
+
+Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the
+controllers with a simple-bus node since they are all connected to the same
+chip-select (CS4), in this example external address decoding is provided:
+
+gmi@70009000 {
+	compatible = "nvidia,tegra20-gmi";
+	reg = <0x70009000 0x1000>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	clocks = <&tegra_car TEGRA20_CLK_NOR>;
+	clock-names = "gmi";
+	resets = <&tegra_car 42>;
+	reset-names = "gmi";
+	ranges = <4 0 0xd0000000 0xfffffff>;
+
+	bus@4,0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 4 0 0x40100>;
+
+		nvidia,snor-mux-mode;
+		nvidia,snor-adv-active-high;
+
+		can@0 {
+			reg = <0 0x100>;
+			...
+		};
+
+		can@40000 {
+			reg = <0x40000 0x100>;
+			...
+		};
+	};
+};
+
+Example with one SJA1000 CAN controller connected to the GMI bus
+on CS4:
+
+gmi@70009000 {
+	compatible = "nvidia,tegra20-gmi";
+	reg = <0x70009000 0x1000>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	clocks = <&tegra_car TEGRA20_CLK_NOR>;
+	clock-names = "gmi";
+	resets = <&tegra_car 42>;
+	reset-names = "gmi";
+	ranges = <4 0 0xd0000000 0xfffffff>;
+
+	can@4,0 {
+		reg = <4 0 0x100>;
+		nvidia,snor-mux-mode;
+		nvidia,snor-adv-active-high;
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
new file mode 100644
index 0000000000..26362c9006
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/nvidia,tegra210-aconnect.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ACONNECT Bus
+
+description: |
+  The Tegra ACONNECT bus is an AXI switch which is used to connect various
+  components inside the Audio Processing Engine (APE). All CPU accesses to
+  the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All
+  devices accessed via the ACONNECT are described by child-nodes.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-aconnect
+      - items:
+          - enum:
+              - nvidia,tegra234-aconnect
+              - nvidia,tegra186-aconnect
+              - nvidia,tegra194-aconnect
+          - const: nvidia,tegra210-aconnect
+
+  clocks:
+    items:
+      - description: Must contain the entry for APE clock
+      - description: Must contain the entry for APE interface clock
+
+  clock-names:
+    items:
+      - const: ape
+      - const: apb2ape
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    aconnect@702c0000 {
+        compatible = "nvidia,tegra210-aconnect";
+        clocks = <&tegra_car TEGRA210_CLK_APE>,
+                 <&tegra_car TEGRA210_CLK_APB2APE>;
+        clock-names = "ape", "apb2ape";
+        power-domains = <&pd_audio>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x702c0000 0x702c0000 0x00040000>;
+
+        // Child device nodes follow ...
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
new file mode 100644
index 0000000000..18729f6fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -0,0 +1,29 @@
+* OMAP OCP2SCP - ocp interface to scp interface
+
+properties:
+- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor
+	       Should be "ti,omap-ocp2scp" for all others
+- reg : Address and length of the register set for the device
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ranges : the child address space are mapped 1:1 onto the parent address space
+- ti,hwmods : must be "ocp2scp_usb_phy"
+
+Sub-nodes:
+All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};
diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml
new file mode 100644
index 0000000000..c36c1e92a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/palmbus.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/palmbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink PalmBus
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The ralink palmbus controller can be found in all ralink MIPS
+  SoCs. It provides an external bus for connecting multiple
+  external devices to the SoC.
+
+properties:
+  $nodename:
+    pattern: "^palmbus(@[0-9a-f]+)?$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    const: palmbus
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  # All other properties should be child nodes with unit-address and 'reg'
+  "@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    palmbus@1e000000 {
+        compatible = "palmbus";
+        reg = <0x1e000000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e000000 0x0fffff>;
+
+        gpio@600 {
+            #gpio-cells = <2>;
+            #interrupt-cells = <2>;
+            compatible = "mediatek,mt7621-gpio";
+            gpio-controller;
+            gpio-ranges = <&pinctrl 0 0 95>;
+            interrupt-controller;
+            reg = <0x600 0x100>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
new file mode 100644
index 0000000000..5058aa2c63
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
@@ -0,0 +1,138 @@
+Qualcomm External Bus Interface 2 (EBI2)
+
+The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
+external memory (such as NAND or other memory-mapped peripherals) whereas
+LCDC handles LCD displays.
+
+As it says it connects devices to an external bus interface, meaning address
+lines (up to 9 address lines so can only address 1KiB external memory space),
+data lines (16 bits), OE (output enable), ADV (address valid, used on some
+NOR flash memories), WE (write enable). This on top of 6 different chip selects
+(CS0 thru CS5) so that in theory 6 different devices can be connected.
+
+Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
+and the bus can only come out on these pins, however if some of the pins are
+unused they can be left unconnected or remuxed to be used as GPIO or in some
+cases other orthogonal functions as well.
+
+Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
+
+The chip selects have the following memory range assignments. This region of
+memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
+
+Chip Select                     Physical address base
+CS0 GPIO134                     0x1a800000-0x1b000000 (8MB)
+CS1 GPIO39 (A) / GPIO123 (B)    0x1b000000-0x1b800000 (8MB)
+CS2 GPIO40 (A) / GPIO124 (B)    0x1b800000-0x1c000000 (8MB)
+CS3 GPIO133                     0x1d000000-0x25000000 (128 MB)
+CS4 GPIO132                     0x1c800000-0x1d000000 (8MB)
+CS5 GPIO131                     0x1c000000-0x1c800000 (8MB)
+
+The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
+August 6, 2012 contains some incomplete documentation of the EBI2.
+
+FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
+We have not been able to figure out which bit fields these correspond to
+in the hardware, or what valid values exist. The current hypothesis is that
+this is something just used on the FAST chip selects and that the SLOW
+chip selects are understood fully. There is also a "byte device enable"
+flag somewhere for 8bit memories.
+
+FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
+unclear what this means, if they are mutually exclusive or can be used
+together, or if some chip selects are hardwired to be FAST and others are SLOW
+by design.
+
+The XMEM registers are totally undocumented but could be partially decoded
+because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
+similar register layout, see: http://www.cypress.com/file/105771/download
+
+Required properties:
+- compatible: should be one of:
+  "qcom,msm8660-ebi2"
+  "qcom,apq8060-ebi2"
+- #address-cells: should be <2>: the first cell is the chipselect,
+  the second cell is the offset inside the memory range
+- #size-cells: should be <1>
+- ranges: should be set to:
+  ranges = <0 0x0 0x1a800000 0x00800000>,
+           <1 0x0 0x1b000000 0x00800000>,
+           <2 0x0 0x1b800000 0x00800000>,
+           <3 0x0 0x1d000000 0x08000000>,
+           <4 0x0 0x1c800000 0x00800000>,
+           <5 0x0 0x1c000000 0x00800000>;
+- reg: two ranges of registers: EBI2 config and XMEM config areas
+- reg-names: should be "ebi2", "xmem"
+- clocks: two clocks, EBI_2X and EBI
+- clock-names: should be "ebi2x", "ebi2"
+
+Optional subnodes:
+- Nodes inside the EBI2 will be considered device nodes.
+
+The following optional properties are properties that can be tagged onto
+any device subnode. We are assuming that there can be only ONE device per
+chipselect subnode, else the properties will become ambiguous.
+
+Optional properties arrays for SLOW chip selects:
+- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to
+  drive the data bus after OE is de-asserted, in order to avoid contention on
+  the data bus. They are inserted when reading one CS and switching to another
+  CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum
+  value is actually 1, so a value of 0 will still yield 1 recovery cycle.
+- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles
+  inserted after every write minimum 1. The data out is driven from the time
+  WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS
+  stays active for 1 extra cycle etc. Valid values 0 thru 15.
+- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for
+  the first write to a page or burst memory. Valid values 0 thru 255.
+- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the
+  first read to a page or burst memory. Valid values 0 thru 255.
+- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1
+  cycle. Valid values 0 thru 15.
+- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1
+  cycle. Valid values 0 thru 15.
+
+Optional properties arrays for FAST chip selects:
+- qcom,xmem-address-hold-enable: this is a boolean property stating that we
+  shall hold the address for an extra cycle to meet hold time requirements
+  with ADV assertion.
+- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE
+  assertion, with respect to the cycle where ADV (address valid) is asserted.
+  2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
+- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
+  read transfer. For a single read transfer this will be the time from CS
+  assertion to OE assertion. Valid values 0 thru 15.
+
+
+Example:
+
+ebi2@1a100000 {
+	compatible = "qcom,apq8060-ebi2";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0x0 0x1a800000 0x00800000>,
+		 <1 0x0 0x1b000000 0x00800000>,
+		 <2 0x0 0x1b800000 0x00800000>,
+		 <3 0x0 0x1d000000 0x08000000>,
+		 <4 0x0 0x1c800000 0x00800000>,
+		 <5 0x0 0x1c000000 0x00800000>;
+	reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+	reg-names = "ebi2", "xmem";
+	clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+	clock-names = "ebi2x", "ebi2";
+	/* Make sure to set up the pin control for the EBI2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&foo_ebi2_pins>;
+
+	foo-ebi2@2,0 {
+		compatible = "foo";
+		reg = <2 0x0 0x100>;
+		(...)
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
new file mode 100644
index 0000000000..693cfa9696
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssbi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Single-wire Serial Bus Interface (SSBI)
+
+description:
+  Some Qualcomm MSM devices contain a point-to-point serial bus used to
+  communicate with a limited range of devices (mostly power management
+  chips).
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,ssbi
+
+  reg:
+    maxItems: 1
+
+  qcom,controller-type:
+    description:
+      Indicates the SSBI bus variant the controller should use to talk
+      with the slave device. The type chosen is determined by the attached
+      slave.
+    enum:
+      - ssbi
+      - ssbi2
+      - pmic-arbiter
+
+  pmic:
+    $ref: /schemas/mfd/qcom-pm8xxx.yaml#
+
+required:
+  - compatible
+  - reg
+  - qcom,controller-type
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi@c00000 {
+        compatible = "qcom,ssbi";
+        reg = <0x00c00000 0x1000>;
+        qcom,controller-type = "pmic-arbiter";
+
+        pmic {
+            compatible = "qcom,pm8821";
+            interrupt-parent = <&msmgpio>;
+            interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
+            #interrupt-cells = <2>;
+            interrupt-controller;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
new file mode 100644
index 0000000000..8e9e6ff35d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
new file mode 100644
index 0000000000..f53a377854
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
@@ -0,0 +1,62 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/renesas,bsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Bus State Controller (BSC)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus
+  Bridge", or "External Bus Interface") can be found in several Renesas ARM
+  SoCs.  It provides an external bus for connecting multiple external
+  devices to the SoC, driving several chip select lines, for e.g. NOR
+  FLASH, Ethernet and USB.
+
+  While the BSC is a fairly simple memory-mapped bus, it may be part of a
+  PM domain, and may have a gateable functional clock.  Before a device
+  connected to the BSC can be accessed, the PM domain containing the BSC
+  must be powered on, and the functional clock driving the BSC must be
+  enabled.
+
+  The bindings for the BSC extend the bindings for "simple-pm-bus".
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,bsc-r8a73a4  # R-Mobile APE6 (r8a73a4)
+          - renesas,bsc-sh73a0   # SH-Mobile AG5 (sh73a0)
+      - const: renesas,bsc
+      - {} # simple-pm-bus, but not listed here to avoid false select
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bsc: bus@fec10000 {
+        compatible = "renesas,bsc-sh73a0", "renesas,bsc", "simple-pm-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x20000000>;
+        reg = <0xfec10000 0x400>;
+        interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zb_clk>;
+        power-domains = <&pd_a4s>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
new file mode 100644
index 0000000000..182134d7a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Power-Managed Bus
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  A Simple Power-Managed Bus is a transparent bus that doesn't need a real
+  driver, as it's typically initialized by the boot loader.
+
+  However, its bus controller is part of a PM domain, or under the control
+  of a functional clock.  Hence, the bus controller's PM domain and/or
+  clock must be enabled for child devices connected to the bus (either
+  on-SoC or externally) to function.
+
+  While "simple-pm-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification, it is not an extension of
+  "simple-bus".
+
+properties:
+  $nodename:
+    pattern: "^bus(@[0-9a-f]+)?$"
+
+  compatible:
+    contains:
+      const: simple-pm-bus
+    description:
+      Shall contain "simple-pm-bus" in addition to a optional bus-specific
+      compatible strings defined in individual pm-bus bindings.
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks: true
+    # Functional clocks
+    # Required if power-domains is absent, optional otherwise
+
+  power-domains:
+    # Required if clocks is absent, optional otherwise
+    minItems: 1
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+anyOf:
+  - required:
+      - clocks
+  - required:
+      - power-domains
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        power-domains = <&gcc AGGRE0_NOC_GDSC>;
+        compatible = "simple-pm-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
new file mode 100644
index 0000000000..49df13fc2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier System Bus
+
+description: |
+  The UniPhier System Bus is an external bus that connects on-board devices to
+  the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and
+  some control signals. It supports up to 8 banks (chip selects).
+
+  Before any access to the bus, the bus controller must be configured; the bus
+  controller registers provide the control for the translation from the offset
+  within each bank to the CPU-viewed address. The needed setup includes the
+  base address, the size of each bank. Optionally, some timing parameters can
+  be optimized for faster bus access.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-bus
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    description: |
+      The first cell is the bank number (chip select).
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Provide address translation from the System Bus to the parent bus.
+
+      Note:
+      The address region(s) that can be assigned for the System Bus is
+      implementation defined. Some SoCs can use 0x00000000-0x0fffffff and
+      0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff.
+      There might be additional limitations depending on SoCs and the boot mode.
+      The address translation is arbitrary as long as the banks are assigned in
+      the supported address space with the required alignment and they do not
+      overlap one another.
+
+      For example, it is possible to map:
+        bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
+      It is also possible to map:
+        bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
+      There is no reason to stick to a particular translation mapping, but the
+      "ranges" property should provide a "reasonable" default that is known to
+      work. The software should initialize the bus controller according to it.
+
+patternProperties:
+  "^.*@[1-5],[1-9a-f][0-9a-f]+$":
+    description: Devices attached to chip selects
+    type: object
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example,
+    // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
+    //   mapped to 0x43f00000 of the parent bus.
+    // - the UART device is connected at the offset 0x00200000 of CS5 and
+    //   mapped to 0x46200000 of the parent bus.
+
+    system-bus@58c00000 {
+        compatible = "socionext,uniphier-system-bus";
+        reg = <0x58c00000 0x400>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0x00000000 0x42000000 0x02000000>,
+                 <5 0x00000000 0x46000000 0x01000000>;
+
+        ethernet@1,1f00000 {
+            compatible = "smsc,lan9115";
+            reg = <1 0x01f00000 0x1000>;
+            interrupts = <0 48 4>;
+            phy-mode = "mii";
+        };
+
+        serial@5,200000 {
+            compatible = "ns16550a";
+            reg = <5 0x00200000 0x20>;
+            interrupts = <0 49 4>;
+            clock-frequency = <12288000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
new file mode 100644
index 0000000000..72daefc6b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments da8xx master peripheral
+  priority driver
+
+DA8XX SoCs feature a set of registers allowing to change the priority of all
+peripherals classified as masters.
+
+Documentation:
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
+
+Required properties:
+
+- compatible:		"ti,da850-mstpri" - for da850 based boards
+- reg:			offset and length of the mstpri registers
+
+Example for da850-lcdk is shown below.
+
+mstpri {
+	compatible = "ti,da850-mstpri";
+	reg = <0x14110 0x0c>;
+};
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
new file mode 100644
index 0000000000..6d7bca6c13
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interconnect target module
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Texas Instruments SoCs can have a generic interconnect target module
+  for devices connected to various interconnects such as L3 interconnect
+  using Arteris NoC, and L4 interconnect using Sonics s3220. This module
+  is mostly used for interaction between module and Power, Reset and Clock
+  Manager PRCM. It participates in the OCP Disconnect Protocol, but other
+  than that it is mostly independent of the interconnect.
+
+  Each interconnect target module can have one or more devices connected to
+  it. There is a set of control registers for managing the interconnect target
+  module clocks, idle modes and interconnect level resets.
+
+  The interconnect target module control registers are sprinkled into the
+  unused register address space of the first child device IP block managed by
+  the interconnect target module. Typically the register names are REVISION,
+  SYSCONFIG and SYSSTATUS.
+
+properties:
+  $nodename:
+    pattern: "^target-module(@[0-9a-f]+)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,sysc-omap2
+              - ti,sysc-omap4
+              - ti,sysc-omap4-simple
+              - ti,sysc-omap2-timer
+              - ti,sysc-omap4-timer
+              - ti,sysc-omap3430-sr
+              - ti,sysc-omap3630-sr
+              - ti,sysc-omap4-sr
+              - ti,sysc-omap3-sham
+              - ti,sysc-omap-aes
+              - ti,sysc-mcasp
+              - ti,sysc-dra7-mcasp
+              - ti,sysc-usb-host-fs
+              - ti,sysc-dra7-mcan
+              - ti,sysc-pruss
+          - const: ti,sysc
+      - items:
+          - const: ti,sysc
+
+  reg:
+    description:
+      Interconnect target module control registers consisting of
+      REVISION, SYSCONFIG and SYSSTATUS registers as defined in the
+      Technical Reference Manual for the SoC.
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    description:
+      Interconnect target module control register names consisting
+      of "rev", "sysc" and "syss".
+    oneOf:
+      - minItems: 1
+        items:
+          - const: rev
+          - const: sysc
+          - const: syss
+      - items:
+          - const: rev
+          - const: syss
+      - enum: [ sysc, syss ]
+
+  power-domains:
+    description: Target module power domain if available.
+    maxItems: 1
+
+  clocks:
+    description:
+      Target module clocks consisting of one functional clock, one
+      interface clock, and up to 8 module specific optional clocks.
+      Some modules may have only the functional clock, and some have
+      no configurable clocks.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    description:
+      Target module clock names like "fck", "ick", "optck1", "optck2"
+      if the clocks are configurable.
+    oneOf:
+      - enum: [ ick, fck, sys_clk ]
+      - items:
+          - const: fck
+          - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ]
+      - items:
+          - const: fck
+          - const: phy-clk
+          - const: phy-clk-div
+      - items:
+          - const: fck
+          - const: hdmi_clk
+          - const: sys_clk
+          - const: tv_clk
+      - items:
+          - const: fck
+          - const: ahclkx
+          - const: ahclkr
+
+  resets:
+    description:
+      Target module reset bit in the RSTCTRL register if wired for the module.
+      Note that the other reset bits should be mapped for the child device
+      driver to use.
+    maxItems: 1
+
+  reset-names:
+    description:
+      Target module reset names in the RSTCTRL register, typically named
+      "rstctrl" if only one reset bit is wired for the module.
+    items:
+      - const: rstctrl
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  dma-ranges: true
+
+  ti,sysc-mask:
+    description: Mask of supported register bits for the SYSCONFIG register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-midle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,sysc-sidle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,syss-mask:
+    description: Mask of supported register bits for the SYSSTATUS register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-delay-us:
+    description: Delay needed after OCP softreset before accessing SYCONFIG
+    default: 0
+    minimum: 0
+    maximum: 2
+
+  ti,no-reset-on-init:
+    description: Interconnect target module shall not be reset at init
+    type: boolean
+
+  ti,no-idle-on-init:
+    description: Interconnect target module shall not be idled at init
+    type: boolean
+
+  ti,no-idle:
+    description: Interconnect target module shall not be idled
+    type: boolean
+
+  ti,hwmods:
+    description: Interconnect module name to use with legacy hwmod data
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/bus/ti-sysc.h>
+    #include <dt-bindings/clock/omap4.h>
+
+    target-module@2b000 {
+        compatible = "ti,sysc-omap2", "ti,sysc";
+        ti,hwmods = "usb_otg_hs";
+        reg = <0x2b400 0x4>,
+              <0x2b404 0x4>,
+              <0x2b408 0x4>;
+        reg-names = "rev", "sysc", "syss";
+        clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+        clock-names = "fck";
+        ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+                         SYSC_OMAP2_SOFTRESET |
+                         SYSC_OMAP2_AUTOIDLE)>;
+        ti,sysc-midle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>;
+        ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>,
+                        <SYSC_IDLE_SMART_WKUP>;
+        ti,syss-mask = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x2b000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt
new file mode 100644
index 0000000000..2a10d065b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt
@@ -0,0 +1,50 @@
+Technologic Systems NBUS
+
+The NBUS is a bus used to interface with peripherals in the Technologic
+Systems FPGA on the TS-4600 SoM.
+
+Required properties :
+ - compatible		: "technologic,ts-nbus"
+ - #address-cells	: must be 1
+ - #size-cells		: must be 0
+ - pwms			: The PWM bound to the FPGA
+ - ts,data-gpios	: The 8 GPIO pins connected to the data lines on the FPGA
+ - ts,csn-gpios		: The GPIO pin connected to the csn line on the FPGA
+ - ts,txrx-gpios	: The GPIO pin connected to the txrx line on the FPGA
+ - ts,strobe-gpios	: The GPIO pin connected to the stobe line on the FPGA
+ - ts,ale-gpios		: The GPIO pin connected to the ale line on the FPGA
+ - ts,rdy-gpios		: The GPIO pin connected to the rdy line on the FPGA
+
+Child nodes:
+
+The NBUS node can contain zero or more child nodes representing peripherals
+on the bus.
+
+Example:
+
+	nbus {
+		compatible = "technologic,ts-nbus";
+		pinctrl-0 = <&nbus_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pwms = <&pwm 2 83>;
+		ts,data-gpios   = <&gpio0 0 GPIO_ACTIVE_HIGH
+				   &gpio0 1 GPIO_ACTIVE_HIGH
+				   &gpio0 2 GPIO_ACTIVE_HIGH
+				   &gpio0 3 GPIO_ACTIVE_HIGH
+				   &gpio0 4 GPIO_ACTIVE_HIGH
+				   &gpio0 5 GPIO_ACTIVE_HIGH
+				   &gpio0 6 GPIO_ACTIVE_HIGH
+				   &gpio0 7 GPIO_ACTIVE_HIGH>;
+		ts,csn-gpios    = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		ts,txrx-gpios   = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+		ts,ale-gpios    = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		ts,rdy-gpios    = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+
+		watchdog@2a {
+			compatible = "...";
+
+			/* ... */
+		};
+	};
diff --git a/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml
new file mode 100644
index 0000000000..7f62ffbdc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/xlnx,versal-net-cdx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD CDX bus controller
+
+description: |
+  CDX bus controller for AMD devices is implemented to dynamically
+  detect CDX bus and devices using the firmware.
+  The CDX bus manages multiple FPGA based hardware devices, which
+  can support network, crypto or any other specialized type of
+  devices. These FPGA based devices can be added/modified dynamically
+  on run-time.
+
+  All devices on the CDX bus will have a unique streamid (for IOMMU)
+  and a unique device ID (for MSI) corresponding to a requestor ID
+  (one to one associated with the device). The streamid and deviceid
+  are used to configure SMMU and GIC-ITS respectively.
+
+  iommu-map property is used to define the set of stream ids
+  corresponding to each device and the associated IOMMU.
+
+  The MSI writes are accompanied by sideband data (Device ID).
+  The msi-map property is used to associate the devices with the
+  device ID as well as the associated ITS controller.
+
+  rproc property (xlnx,rproc) is used to identify the remote processor
+  with which APU (Application Processor Unit) interacts to find out
+  the bus and device configuration.
+
+maintainers:
+  - Nipun Gupta <nipun.gupta@amd.com>
+  - Nikhil Agarwal <nikhil.agarwal@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,versal-net-cdx
+
+  iommu-map: true
+
+  msi-map: true
+
+  xlnx,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the remoteproc_r5 rproc node using which APU interacts
+      with remote processor.
+
+  ranges: true
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+required:
+  - compatible
+  - iommu-map
+  - msi-map
+  - xlnx,rproc
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cdx {
+        compatible = "xlnx,versal-net-cdx";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        /* define map for RIDs 250-259 */
+        iommu-map = <250 &smmu 250 10>;
+        /* define msi map for RIDs 250-259 */
+        msi-map = <250 &its 250 10>;
+        xlnx,rproc = <&remoteproc_r5>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
new file mode 100644
index 0000000000..d2cbe49f4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2023 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/andestech,ax45mp-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andestech AX45MP L2 Cache Controller
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  A level-2 cache (L2C) is used to improve the system performance by providing
+  a large amount of cache line entries and reasonable access delays. The L2C
+  is shared between cores, and a non-inclusive non-exclusive policy is used.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - andestech,ax45mp-cache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: andestech,ax45mp-cache
+      - const: cache
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  cache-line-size:
+    const: 64
+
+  cache-level:
+    const: 2
+
+  cache-sets:
+    const: 1024
+
+  cache-size:
+    enum: [131072, 262144, 524288, 1048576, 2097152]
+
+  cache-unified: true
+
+  next-level-cache: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - cache-line-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cache-controller@13400000 {
+        compatible = "andestech,ax45mp-cache", "cache";
+        reg = <0x13400000 0x100000>;
+        interrupts = <508 IRQ_TYPE_LEVEL_HIGH>;
+        cache-line-size = <64>;
+        cache-level = <2>;
+        cache-sets = <1024>;
+        cache-size = <262144>;
+        cache-unified;
+    };
diff --git a/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml
new file mode 100644
index 0000000000..ec4f367bc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/baikal,bt1-l2-ctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 L2-cache Control Block
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  By means of the System Controller Baikal-T1 SoC exposes a few settings to
+  tune the MIPS P5600 CM2 L2 cache performance up. In particular it's possible
+  to change the Tag, Data and Way-select RAM access latencies. Baikal-T1
+  L2-cache controller block is responsible for the tuning. Its DT node is
+  supposed to be a child of the system controller.
+
+properties:
+  compatible:
+    const: baikal,bt1-l2-ctl
+
+  reg:
+    maxItems: 1
+
+  baikal,l2-ws-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Way-select RAM accesses
+    default: 0
+    minimum: 0
+    maximum: 3
+
+  baikal,l2-tag-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Tag RAM accesses
+    default: 0
+    minimum: 0
+    maximum: 3
+
+  baikal,l2-data-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Cycles of latency for Data RAM accesses
+    default: 1
+    minimum: 0
+    maximum: 3
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    l2@1f04d028 {
+      compatible = "baikal,bt1-l2-ctl";
+      reg = <0x1f04d028 0x004>;
+
+      baikal,l2-ws-latency = <1>;
+      baikal,l2-tag-latency = <1>;
+      baikal,l2-data-latency = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/cache/freescale-l2cache.txt b/Documentation/devicetree/bindings/cache/freescale-l2cache.txt
new file mode 100644
index 0000000000..22ad012660
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/freescale-l2cache.txt
@@ -0,0 +1,55 @@
+Freescale L2 Cache Controller
+
+L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
+The cache bindings explained below are Devicetree Specification compliant
+
+Required Properties:
+
+- compatible	: Should include one of the following:
+		  "fsl,b4420-l2-cache-controller"
+		  "fsl,b4860-l2-cache-controller"
+		  "fsl,bsc9131-l2-cache-controller"
+		  "fsl,bsc9132-l2-cache-controller"
+		  "fsl,c293-l2-cache-controller"
+		  "fsl,mpc8536-l2-cache-controller"
+		  "fsl,mpc8540-l2-cache-controller"
+		  "fsl,mpc8541-l2-cache-controller"
+		  "fsl,mpc8544-l2-cache-controller"
+		  "fsl,mpc8548-l2-cache-controller"
+		  "fsl,mpc8555-l2-cache-controller"
+		  "fsl,mpc8560-l2-cache-controller"
+		  "fsl,mpc8568-l2-cache-controller"
+		  "fsl,mpc8569-l2-cache-controller"
+		  "fsl,mpc8572-l2-cache-controller"
+		  "fsl,p1010-l2-cache-controller"
+		  "fsl,p1011-l2-cache-controller"
+		  "fsl,p1012-l2-cache-controller"
+		  "fsl,p1013-l2-cache-controller"
+		  "fsl,p1014-l2-cache-controller"
+		  "fsl,p1015-l2-cache-controller"
+		  "fsl,p1016-l2-cache-controller"
+		  "fsl,p1020-l2-cache-controller"
+		  "fsl,p1021-l2-cache-controller"
+		  "fsl,p1022-l2-cache-controller"
+		  "fsl,p1023-l2-cache-controller"
+		  "fsl,p1024-l2-cache-controller"
+		  "fsl,p1025-l2-cache-controller"
+		  "fsl,p2010-l2-cache-controller"
+		  "fsl,p2020-l2-cache-controller"
+		  "fsl,t2080-l2-cache-controller"
+		  "fsl,t4240-l2-cache-controller"
+		  and "cache".
+- reg		: Address and size of L2 cache controller registers
+- cache-size	: Size of the entire L2 cache
+- interrupts	: Error interrupt of L2 controller
+- cache-line-size : Size of L2 cache lines
+
+Example:
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller", "cache";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>; // 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
new file mode 100644
index 0000000000..d7840a5c40
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/l2c2x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM L2 Cache Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
+  PL220/PL310 and variants) based level 2 cache controller. All these various
+  implementations of the L2 cache controller have compatible programming
+  models (Note 1). Some of the properties that are just prefixed "cache-*" are
+  taken from section 3.7.3 of the Devicetree Specification which can be found
+  at:
+  https://www.devicetree.org/specifications/
+
+  Note 1: The description in this document doesn't apply to integrated L2
+    cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+    integrated L2 controllers are assumed to be all preconfigured by
+    early secure boot code. Thus no need to deal with their configuration
+    in the kernel at all.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - arm,pl310-cache
+          - arm,l220-cache
+          - arm,l210-cache
+            # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+          - bcm,bcm11351-a2-pl310-cache
+            # For Broadcom bcm11351 chipset where an
+            # offset needs to be added to the address before passing down to the L2
+            # cache controller
+          - brcm,bcm11351-a2-pl310-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one, with system cache mode (meaning
+            # maintenance operations on L1 are broadcasted to the L2 and L2
+            # performs the same operation).
+          - marvell,aurora-system-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one with outer cache mode.
+          - marvell,aurora-outer-cache
+      - items:
+           # Marvell Tauros3 cache controller, compatible
+           # with arm,pl310-cache controller.
+          - const: marvell,tauros3-cache
+          - const: arm,pl310-cache
+
+  cache-level:
+    const: 2
+
+  cache-unified: true
+  cache-size: true
+  cache-sets: true
+  cache-block-size: true
+  cache-line-size: true
+
+  reg:
+    maxItems: 1
+
+  arm,data-latency:
+    description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
+      read, write and setup latencies. Minimum valid values are 1. Controllers
+      without setup latency control should use a value of 0.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
+  arm,tag-latency:
+    description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+      read, write and setup latencies. Controllers without setup latency control
+      should use 0. Controllers without separate read and write Tag RAM latency
+      values should only use the first cell.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
+  arm,dirty-latency:
+    description: Cycles of latency for Dirty RAMs. This is a single cell.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+
+  arm,filter-ranges:
+    description: <start length> Starting address and length of window to
+      filter. Addresses in the filter window are directed to the M1 port. Other
+      addresses will go to the M0 port.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 2
+      maxItems: 2
+
+  arm,io-coherent:
+    description: indicates that the system is operating in an hardware
+      I/O coherent mode. Valid only when the arm,pl310-cache compatible
+      string is used.
+    type: boolean
+
+  interrupts:
+    # Either a single combined interrupt or up to 9 individual interrupts
+    minItems: 1
+    maxItems: 9
+
+  cache-id-part:
+    description: cache id part number to be used if it is not present
+      on hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  wt-override:
+    description: If present then L2 is forced to Write through mode
+    type: boolean
+
+  arm,double-linefill:
+    description: Override double linefill enable setting. Enable if
+      non-zero, disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,double-linefill-incr:
+    description: Override double linefill on INCR read. Enable
+      if non-zero, disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,double-linefill-wrap:
+    description: Override double linefill on WRAP read. Enable
+      if non-zero, disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,prefetch-drop:
+    description: Override prefetch drop enable setting. Enable if non-zero,
+      disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,prefetch-offset:
+    description: Override prefetch offset value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
+
+  arm,shared-override:
+    description: The default behavior of the L220 or PL310 cache
+      controllers with respect to the shareable attribute is to transform "normal
+      memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+      or "write through no write allocate" (for writes).
+      On systems where this may cause DMA buffer corruption, this property must
+      be specified to indicate that such transforms are precluded.
+    type: boolean
+
+  arm,parity-enable:
+    description: enable parity checking on the L2 cache (L220 or PL310).
+    type: boolean
+
+  arm,parity-disable:
+    description: disable parity checking on the L2 cache (L220 or PL310).
+    type: boolean
+
+  marvell,ecc-enable:
+    description: enable ECC protection on the L2 cache
+    type: boolean
+
+  arm,outer-sync-disable:
+    description: disable the outer sync operation on the L2 cache.
+      Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+      will randomly hang unless outer sync operations are disabled.
+    type: boolean
+
+  prefetch-data:
+    description: |
+      Data prefetch. Value: <0> (forcibly disable), <1>
+      (forcibly enable), property absent (retain settings set by firmware)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  prefetch-instr:
+    description: |
+      Instruction prefetch. Value: <0> (forcibly disable),
+      <1> (forcibly enable), property absent (retain settings set by
+      firmware)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,dynamic-clock-gating:
+    description: |
+      L2 dynamic clock gating. Value: <0> (forcibly
+      disable), <1> (forcibly enable), property absent (OS specific behavior,
+      preferably retain firmware settings)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,standby-mode:
+    description: L2 standby mode enable. Value <0> (forcibly disable),
+      <1> (forcibly enable), property absent (OS specific behavior,
+      preferably retain firmware settings)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,early-bresp-disable:
+    description: Disable the CA9 optimization Early BRESP (PL310)
+    type: boolean
+
+  arm,full-line-zero-disable:
+    description: Disable the CA9 optimization Full line of zero
+      write (PL310)
+    type: boolean
+
+required:
+  - compatible
+  - cache-unified
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cache-controller@fff12000 {
+        compatible = "arm,pl310-cache";
+        reg = <0xfff12000 0x1000>;
+        arm,data-latency = <1 1 1>;
+        arm,tag-latency = <2 2 2>;
+        arm,filter-ranges = <0x80000000 0x8000000>;
+        cache-unified;
+        cache-level = <2>;
+        interrupts = <45>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt b/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
new file mode 100644
index 0000000000..0d244b999d
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
@@ -0,0 +1,16 @@
+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+  	       "marvell,kirkwood-cache".
+
+Optional properties:
+- reg        : Address of the L2 cache control register. Mandatory for
+  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
diff --git a/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
new file mode 100644
index 0000000000..31af1cbb60
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
@@ -0,0 +1,17 @@
+* Marvell Tauros2 Cache
+
+Required properties:
+- compatible : Should be "marvell,tauros2-cache".
+- marvell,tauros2-cache-features : Specify the features supported for the
+  tauros2 cache.
+  The features including
+    CACHE_TAUROS2_PREFETCH_ON       (1 << 0)
+    CACHE_TAUROS2_LINEFILL_BURST8   (1 << 1)
+  The definition can be found at
+  arch/arm/include/asm/hardware/cache-tauros2.h
+
+Example:
+	L2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0x3>;
+	};
diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
new file mode 100644
index 0000000000..44892aa589
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/qcom,llcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Last Level Cache Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
+  that can be shared by multiple clients. Clients here are different cores in the
+  SoC, the idea is to minimize the local caches at the clients and migrate to
+  common pool of memory. Cache memory is divided into partitions called slices
+  which are assigned to clients. Clients can query the slice details, activate
+  and deactivate them.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-llcc
+      - qcom,sc7280-llcc
+      - qcom,sc8180x-llcc
+      - qcom,sc8280xp-llcc
+      - qcom,sdm845-llcc
+      - qcom,sm6350-llcc
+      - qcom,sm7150-llcc
+      - qcom,sm8150-llcc
+      - qcom,sm8250-llcc
+      - qcom,sm8350-llcc
+      - qcom,sm8450-llcc
+      - qcom,sm8550-llcc
+
+  reg:
+    minItems: 2
+    maxItems: 9
+
+  reg-names:
+    minItems: 2
+    maxItems: 9
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-llcc
+              - qcom,sm6350-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-llcc
+              - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-llcc
+              - qcom,sm8150-llcc
+              - qcom,sm8250-llcc
+              - qcom,sm8350-llcc
+              - qcom,sm8450-llcc
+              - qcom,sm8550-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc_broadcast_base
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        system-cache-controller@1100000 {
+            compatible = "qcom,sdm845-llcc";
+            reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>,
+                <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+                <0 0x01300000 0 0x50000>;
+            reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+                "llcc3_base", "llcc_broadcast_base";
+            interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
new file mode 100644
index 0000000000..8a6a78e1a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/sifive,ccache0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Composable Cache Controller
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+  The SiFive Composable Cache Controller is used to provide access to fast copies
+  of memory for masters in a Core Complex. The Composable Cache Controller also
+  acts as directory-based coherency manager.
+  All the properties in ePAPR/DeviceTree specification applies for this platform.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,ccache0
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,ccache0
+              - sifive,fu540-c000-ccache
+              - sifive,fu740-c000-ccache
+          - const: cache
+      - items:
+          - const: starfive,jh7110-ccache
+          - const: sifive,ccache0
+          - const: cache
+      - items:
+          - const: microchip,mpfs-ccache
+          - const: sifive,fu540-c000-ccache
+          - const: cache
+
+  cache-block-size:
+    const: 64
+
+  cache-level:
+    enum: [2, 3]
+
+  cache-sets:
+    enum: [1024, 2048]
+
+  cache-size:
+    const: 2097152
+
+  cache-unified: true
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: DirError interrupt
+      - description: DataError interrupt
+      - description: DataFail interrupt
+      - description: DirFail interrupt
+
+  reg:
+    maxItems: 1
+
+  next-level-cache: true
+
+  memory-region:
+    maxItems: 1
+    description: |
+      The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
+      The reserved memory node should be defined as per the bindings in reserved-memory.txt.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - starfive,jh7110-ccache
+              - microchip,mpfs-ccache
+
+    then:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError, DataFail, DirFail signals.
+          minItems: 4
+
+    else:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError and DataFail signals.
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - starfive,jh7110-ccache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+
+    else:
+      properties:
+        cache-sets:
+          const: 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,ccache0
+
+    then:
+      properties:
+        cache-level:
+          enum: [2, 3]
+
+    else:
+      properties:
+        cache-level:
+          const: 2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - cache-block-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+  - interrupts
+  - reg
+
+examples:
+  - |
+    cache-controller@2010000 {
+        compatible = "sifive,fu540-c000-ccache", "cache";
+        cache-block-size = <64>;
+        cache-level = <2>;
+        cache-sets = <1024>;
+        cache-size = <2097152>;
+        cache-unified;
+        reg = <0x2010000 0x1000>;
+        interrupt-parent = <&plic0>;
+        interrupts = <1>,
+                     <2>,
+                     <3>;
+        next-level-cache = <&L25>;
+        memory-region = <&l2_lim>;
+    };
diff --git a/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml
new file mode 100644
index 0000000000..3196263685
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/socionext,uniphier-system-cache.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier outer cache controller
+
+description: |
+  UniPhier ARM 32-bit SoCs are integrated with a full-custom outer cache
+  controller system. All of them have a level 2 cache controller, and some
+  have a level 3 cache controller as well.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-system-cache
+
+  reg:
+    description: |
+      should contain 3 regions: control register, revision register,
+      operation register, in this order.
+    maxItems: 3
+
+  interrupts:
+    description: |
+      Interrupts can be used to notify the completion of cache operations.
+      The number of interrupts should match to the number of CPU cores.
+      The specified interrupts correspond to CPU0, CPU1, ... in this order.
+    minItems: 1
+    maxItems: 4
+
+  cache-unified: true
+
+  cache-size: true
+
+  cache-sets: true
+
+  cache-line-size: true
+
+  cache-level:
+    minimum: 2
+    maximum: 3
+
+  next-level-cache: true
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - cache-unified
+  - cache-size
+  - cache-sets
+  - cache-line-size
+  - cache-level
+
+examples:
+  - |
+    // System with L2.
+    cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x140000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+    };
+  - |
+    // System with L2 and L3.
+    //   L2 should specify the next level cache by 'next-level-cache'.
+    l2: cache-controller@500c0000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+        interrupts = <0 190 4>, <0 191 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <128>;
+        cache-level = <2>;
+        next-level-cache = <&l3>;
+    };
+
+    l3: cache-controller@500c8000 {
+        compatible = "socionext,uniphier-system-cache";
+        reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+        interrupts = <0 174 4>, <0 175 4>;
+        cache-unified;
+        cache-size = <0x200000>;
+        cache-sets = <512>;
+        cache-line-size = <256>;
+        cache-level = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
new file mode 100644
index 0000000000..9f9816fbec
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-ec-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chrome OS EC(Embedded Controller) Type C port driver.
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Prashant Malani <pmalani@chromium.org>
+
+description:
+  Chrome OS devices have an Embedded Controller(EC) which has access to
+  Type C port state. This node is intended to allow the host to read and
+  control the Type C ports. The node for this device should be under a
+  cros-ec node like google,cros-ec-spi.
+
+properties:
+  compatible:
+    const: google,cros-ec-typec
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@[0-9a-f]+$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+        interrupts = <35 0>;
+
+        typec {
+          compatible = "google,cros-ec-typec";
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "dual";
+            data-role = "dual";
+            try-power-role = "source";
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
new file mode 100644
index 0000000000..c94ab8f9e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-kbd-led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS keyboard backlight LED driver.
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+properties:
+  compatible:
+    const: google,cros-kbd-led-backlight
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+        interrupts = <15 0>;
+
+        kbd-led-backlight {
+          compatible = "google,cros-kbd-led-backlight";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
new file mode 100644
index 0000000000..d19885b7c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -0,0 +1,52 @@
+* Actions Semi Owl Clock Management Unit (CMU)
+
+The Actions Semi Owl Clock Management Unit generates and supplies clock
+to various controllers within the SoC. The clock binding described here is
+applicable to S900, S700 and S500 SoC's.
+
+Required Properties:
+
+- compatible: should be one of the following,
+	"actions,s900-cmu"
+	"actions,s700-cmu"
+	"actions,s500-cmu"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: Reference to the parent clocks ("hosc", "losc")
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier, and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in corresponding
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or
+actions,s500-cmu.h header and can be used in device tree sources.
+
+External clocks:
+
+The hosc clock used as input for the plls is generated outside the SoC. It is
+expected that it is defined using standard clock bindings as "hosc".
+
+Actions Semi S900 CMU also requires one more clock:
+ - "losc" - internal low frequency oscillator
+
+Example: Clock Management Unit node:
+
+        cmu: clock-controller@e0160000 {
+                compatible = "actions,s900-cmu";
+                reg = <0x0 0xe0160000 0x0 0x1000>;
+                clocks = <&hosc>, <&losc>;
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+        };
+
+Example: UART controller node that consumes clock generated by the clock
+management unit:
+
+        uart: serial@e012a000 {
+                compatible = "actions,s900-uart", "actions,owl-uart";
+                reg = <0x0 0xe012a000 0x0 0x2000>;
+                interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cmu CLK_UART5>;
+        };
diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
new file mode 100644
index 0000000000..5e942bccf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI clkgen pcore clock generator
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The axi_clkgen IP core is a software programmable clock generator,
+  that can be synthesized on various FPGA platforms.
+
+  Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-clkgen-2.00.a
+      - adi,zynqmp-axi-clkgen-2.00.a
+
+  clocks:
+    description:
+      Specifies the reference clock(s) from which the output frequency is
+      derived. This must either reference one clock if only the first clock
+      input is connected or two if both clock inputs are connected.
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ff000000 {
+      compatible = "adi,axi-clkgen-2.00.a";
+      #clock-cells = <0>;
+      reg = <0xff000000 0x1000>;
+      clocks = <&osc 1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 0000000000..79b0752faa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
new file mode 100644
index 0000000000..93587b7004
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AHB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ahb-clk
+      - allwinner,sun6i-a31-ahb1-clk
+      - allwinner,sun8i-h3-ahb2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun4i-a10-ahb-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-ahb1-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-ahb2-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+examples:
+  - |
+    ahb@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-ahb-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&axi>;
+        clock-output-names = "ahb";
+    };
+
+  - |
+    ahb1@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun6i-a31-ahb1-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+        clock-output-names = "ahb1";
+    };
+
+  - |
+    ahb2_clk@1c2005c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-h3-ahb2-clk";
+        reg = <0x01c2005c 0x4>;
+        clocks = <&ahb1>, <&pll6d2>;
+        clock-output-names = "ahb2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
new file mode 100644
index 0000000000..e14e1aad9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB0 Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-apb0-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    apb0@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-apb0-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&ahb>;
+        clock-output-names = "apb0";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
new file mode 100644
index 0000000000..8a4747ebe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB1 Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-apb1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20058 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-apb1-clk";
+        reg = <0x01c20058 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+        clock-output-names = "apb1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
new file mode 100644
index 0000000000..aa08dd49dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AXI Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-axi-clk
+      - allwinner,sun8i-a23-axi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    axi@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-axi-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&cpu>;
+        clock-output-names = "axi";
+    };
+
+  - |
+    axi_clk@1c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-axi-clk";
+        reg = <0x01c20050 0x4>;
+        clocks = <&cpu>;
+        clock-output-names = "axi";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
new file mode 100644
index 0000000000..1690b9d99c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Clock Control Unit
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ccu
+      - allwinner,sun5i-a10s-ccu
+      - allwinner,sun5i-a13-ccu
+      - allwinner,sun6i-a31-ccu
+      - allwinner,sun7i-a20-ccu
+      - allwinner,sun8i-a23-ccu
+      - allwinner,sun8i-a33-ccu
+      - allwinner,sun8i-a83t-ccu
+      - allwinner,sun8i-a83t-r-ccu
+      - allwinner,sun8i-h3-ccu
+      - allwinner,sun8i-h3-r-ccu
+      - allwinner,sun8i-r40-ccu
+      - allwinner,sun8i-v3-ccu
+      - allwinner,sun8i-v3s-ccu
+      - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
+      - allwinner,sun50i-a64-ccu
+      - allwinner,sun50i-a64-r-ccu
+      - allwinner,sun50i-a100-ccu
+      - allwinner,sun50i-a100-r-ccu
+      - allwinner,sun50i-h5-ccu
+      - allwinner,sun50i-h6-ccu
+      - allwinner,sun50i-h6-r-ccu
+      - allwinner,sun50i-h616-ccu
+      - allwinner,sun50i-h616-r-ccu
+      - allwinner,suniv-f1c100s-ccu
+      - nextthing,gr8-ccu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: High Frequency Oscillator (usually at 24MHz)
+      - description: Low Frequency Oscillator (usually at 32kHz)
+      - description: Internal Oscillator
+      - description: Peripherals PLL
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hosc
+      - const: losc
+      - const: iosc
+      - const: pll-periph
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun8i-a83t-r-ccu
+        - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
+        - allwinner,sun50i-a64-r-ccu
+        - allwinner,sun50i-a100-r-ccu
+        - allwinner,sun50i-h6-r-ccu
+        - allwinner,sun50i-h616-r-ccu
+
+then:
+  properties:
+    clocks:
+      minItems: 4
+      maxItems: 4
+
+    clock-names:
+      minItems: 4
+      maxItems: 4
+
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - allwinner,sun20i-d1-ccu
+          - allwinner,sun50i-a100-ccu
+          - allwinner,sun50i-h6-ccu
+          - allwinner,sun50i-h616-ccu
+
+  then:
+    properties:
+      clocks:
+        minItems: 3
+        maxItems: 3
+
+      clock-names:
+        minItems: 3
+        maxItems: 3
+
+  else:
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 2
+
+      clock-names:
+        minItems: 2
+        maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    ccu: clock@1c20000 {
+        compatible = "allwinner,sun8i-h3-ccu";
+        reg = <0x01c20000 0x400>;
+        clocks = <&osc24M>, <&osc32k>;
+        clock-names = "hosc", "losc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    r_ccu: clock@1f01400 {
+        compatible = "allwinner,sun50i-a64-r-ccu";
+        reg = <0x01f01400 0x100>;
+        clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>;
+        clock-names = "hosc", "losc", "iosc", "pll-periph";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
new file mode 100644
index 0000000000..08d073520c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-cpu-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    cpu@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-cpu-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+        clock-output-names = "cpu";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
new file mode 100644
index 0000000000..e665e50c17
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-display-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20104 {
+        #clock-cells = <0>;
+        #reset-cells = <0>;
+        compatible = "allwinner,sun4i-a10-display-clk";
+        reg = <0x01c20104 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll5 1>;
+        clock-output-names = "de-be";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
new file mode 100644
index 0000000000..c4714d0fbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      This additional argument passed to that clock is the offset of
+      the bit controlling this particular gate in the register.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-gates-clk
+      - const: allwinner,sun4i-a10-axi-gates-clk
+      - const: allwinner,sun4i-a10-ahb-gates-clk
+      - const: allwinner,sun5i-a10s-ahb-gates-clk
+      - const: allwinner,sun5i-a13-ahb-gates-clk
+      - const: allwinner,sun7i-a20-ahb-gates-clk
+      - const: allwinner,sun6i-a31-ahb1-gates-clk
+      - const: allwinner,sun8i-a23-ahb1-gates-clk
+      - const: allwinner,sun9i-a80-ahb0-gates-clk
+      - const: allwinner,sun9i-a80-ahb1-gates-clk
+      - const: allwinner,sun9i-a80-ahb2-gates-clk
+      - const: allwinner,sun4i-a10-apb0-gates-clk
+      - const: allwinner,sun5i-a10s-apb0-gates-clk
+      - const: allwinner,sun5i-a13-apb0-gates-clk
+      - const: allwinner,sun7i-a20-apb0-gates-clk
+      - const: allwinner,sun9i-a80-apb0-gates-clk
+      - const: allwinner,sun8i-a83t-apb0-gates-clk
+      - const: allwinner,sun4i-a10-apb1-gates-clk
+      - const: allwinner,sun5i-a13-apb1-gates-clk
+      - const: allwinner,sun5i-a10s-apb1-gates-clk
+      - const: allwinner,sun6i-a31-apb1-gates-clk
+      - const: allwinner,sun7i-a20-apb1-gates-clk
+      - const: allwinner,sun8i-a23-apb1-gates-clk
+      - const: allwinner,sun9i-a80-apb1-gates-clk
+      - const: allwinner,sun6i-a31-apb2-gates-clk
+      - const: allwinner,sun8i-a23-apb2-gates-clk
+      - const: allwinner,sun8i-a83t-bus-gates-clk
+      - const: allwinner,sun9i-a80-apbs-gates-clk
+      - const: allwinner,sun4i-a10-dram-gates-clk
+
+      - items:
+          - const: allwinner,sun5i-a13-dram-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
+
+      - items:
+          - const: allwinner,sun8i-h3-apb0-gates-clk
+          - const: allwinner,sun4i-a10-gates-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 64
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2005c {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-axi-gates-clk";
+        reg = <0x01c2005c 0x4>;
+        clocks = <&axi>;
+        clock-indices = <0>;
+        clock-output-names = "axi_dram";
+    };
+
+  - |
+    clk@1c20060 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+        reg = <0x01c20060 0x8>;
+        clocks = <&ahb>;
+        clock-indices = <0>, <1>,
+                        <2>, <3>,
+                        <4>, <5>, <6>,
+                        <7>, <8>, <9>,
+                        <10>, <11>, <12>,
+                        <13>, <14>, <16>,
+                        <17>, <18>, <20>,
+                        <21>, <22>, <23>,
+                        <24>, <25>, <26>,
+                        <32>, <33>, <34>,
+                        <35>, <36>, <37>,
+                        <40>, <41>, <43>,
+                        <44>, <45>,
+                        <46>, <47>,
+                        <50>, <52>;
+        clock-output-names = "ahb_usb0", "ahb_ehci0",
+                             "ahb_ohci0", "ahb_ehci1",
+                             "ahb_ohci1", "ahb_ss", "ahb_dma",
+                             "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+                             "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+                             "ahb_nand", "ahb_sdram", "ahb_ace",
+                             "ahb_emac", "ahb_ts", "ahb_spi0",
+                             "ahb_spi1", "ahb_spi2", "ahb_spi3",
+                             "ahb_pata", "ahb_sata", "ahb_gps",
+                             "ahb_ve", "ahb_tvd", "ahb_tve0",
+                             "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
+                             "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+                             "ahb_de_be0", "ahb_de_be1",
+                             "ahb_de_fe0", "ahb_de_fe1",
+                             "ahb_mp", "ahb_mali400";
+    };
+
+
+  - |
+    clk@1c20068 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+        reg = <0x01c20068 0x4>;
+        clocks = <&apb0>;
+        clock-indices = <0>, <1>,
+                        <2>, <3>,
+                        <5>, <6>,
+                        <7>, <10>;
+        clock-output-names = "apb0_codec", "apb0_spdif",
+                             "apb0_ac97", "apb0_iis",
+                             "apb0_pio", "apb0_ir0",
+                             "apb0_ir1", "apb0_keypad";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
new file mode 100644
index 0000000000..e824e33489
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MBUS Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun5i-a13-mbus-clk
+      - allwinner,sun8i-a23-mbus-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2015c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun5i-a13-mbus-clk";
+        reg = <0x01c2015c 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "mbus";
+    };
+
+  - |
+    clk@1c2015c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-mbus-clk";
+        reg = <0x01c2015c 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+        clock-output-names = "mbus";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
new file mode 100644
index 0000000000..c612f94bef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      There is three different outputs: the main clock, with the ID 0,
+      and the output and sample clocks, with the IDs 1 and 2,
+      respectively.
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-mmc-clk
+      - allwinner,sun9i-a80-mmc-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 3
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun4i-a10-mmc-clk
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+else:
+  properties:
+    clocks:
+      maxItems: 2
+
+examples:
+  - |
+    clk@1c20088 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-mmc-clk";
+        reg = <0x01c20088 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "mmc0",
+                             "mmc0_output",
+                             "mmc0_sample";
+    };
+
+  - |
+    clk@6000410 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun9i-a80-mmc-clk";
+        reg = <0x06000410 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "mmc0", "mmc0_output",
+                             "mmc0_sample";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
new file mode 100644
index 0000000000..80ae3a7a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 0 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun4i-a10-mod0-clk
+          - allwinner,sun9i-a80-mod0-clk
+
+  # The PRCM on the A31 and A23 will have the reg property missing,
+  # since it's set at the upper level node, and will be validated by
+  # PRCM's schema. Make sure we only validate standalone nodes.
+  required:
+    - compatible
+    - reg
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-mod0-clk
+      - allwinner,sun9i-a80-mod0-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # On the A80, the PRCM mod0 clocks have 2 parents.
+    minItems: 2
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20080 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod0-clk";
+        reg = <0x01c20080 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "nand";
+    };
+
+  - |
+    clk@8001454 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod0-clk";
+        reg = <0x08001454 0x4>;
+        clocks = <&osc32k>, <&osc24M>;
+        clock-output-names = "r_ir";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
new file mode 100644
index 0000000000..4f9a8d44d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-mod1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-pll2.h>
+
+    clk@1c200c0 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod1-clk";
+        reg = <0x01c200c0 0x4>;
+        clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+                 <&pll2 SUN4I_A10_PLL2_4X>,
+                 <&pll2 SUN4I_A10_PLL2_2X>,
+                 <&pll2 SUN4I_A10_PLL2_1X>;
+        clock-output-names = "spdif";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
new file mode 100644
index 0000000000..0052bf1e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Gateable Oscillator Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-osc-clk
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: >
+      Frequency of the main oscillator.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clock-frequency
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    osc24M: clk@1c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-osc-clk";
+        reg = <0x01c20050 0x4>;
+        clock-frequency = <24000000>;
+        clock-output-names = "osc24M";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
new file mode 100644
index 0000000000..b13a1f21d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-pll1-clk
+      - allwinner,sun6i-a31-pll1-clk
+      - allwinner,sun8i-a23-pll1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "osc24M";
+    };
+
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun6i-a31-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll1";
+    };
+
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
new file mode 100644
index 0000000000..418d207d23
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-pll3-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20010 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-pll3-clk";
+        reg = <0x01c20010 0x4>;
+        clocks = <&osc3M>;
+        clock-output-names = "pll3";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
new file mode 100644
index 0000000000..76ef3f0c7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DRAM PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the DRAM clock output, the second is meant
+      for peripherals on the SoC.
+
+  compatible:
+    const: allwinner,sun4i-a10-pll5-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20020 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-pll5-clk";
+        reg = <0x01c20020 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll5_ddr", "pll5_other";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
new file mode 100644
index 0000000000..a94c93c90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Peripheral PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the SATA clock output, the second is the
+      regular PLL output, the third is a PLL output at twice the rate.
+
+  compatible:
+    const: allwinner,sun4i-a10-pll6-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 3
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20028 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-pll6-clk";
+        reg = <0x01c20028 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll6_sata", "pll6_other", "pll6";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
new file mode 100644
index 0000000000..6646b2a99f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TCON Channel 0 Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-tcon-ch0-clk
+      - allwinner,sun4i-a10-tcon-ch1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun4i-a10-tcon-ch0-clk
+
+then:
+  required:
+    - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20118 {
+        #clock-cells = <0>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+        reg = <0x01c20118 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+        clock-output-names = "tcon-ch0-sclk";
+    };
+
+  - |
+    clk@1c2012c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+        reg = <0x01c2012c 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+        clock-output-names = "tcon-ch1-sclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
new file mode 100644
index 0000000000..5103b675e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-usb-clk
+      - allwinner,sun5i-a13-usb-clk
+      - allwinner,sun6i-a31-usb-clk
+      - allwinner,sun8i-a23-usb-clk
+      - allwinner,sun8i-h3-usb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 8
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun4i-a10-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun5i-a13-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-a23-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 8
+
+examples:
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun4i-a10-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&pll6 1>;
+        clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun5i-a13-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&pll6 1>;
+        clock-output-names = "usb_ohci0", "usb_phy";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+                             "usb_ohci0", "usb_ohci1",
+                             "usb_ohci2";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun8i-a23-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
+                             "usb_hsic_12M", "usb_ohci0";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun8i-h3-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1",
+                             "usb_phy2", "usb_phy3",
+                             "usb_ohci0", "usb_ohci1",
+                             "usb_ohci2", "usb_ohci3";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
new file mode 100644
index 0000000000..80337e38d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video Engine Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-ve-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2013c {
+        #clock-cells = <0>;
+        #reset-cells = <0>;
+        compatible = "allwinner,sun4i-a10-ve-clk";
+        reg = <0x01c2013c 0x4>;
+        clocks = <&pll4>;
+        clock-output-names = "ve";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
new file mode 100644
index 0000000000..c6a6fbb686
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 AHB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun5i-a13-ahb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun5i-a13-ahb-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&axi>, <&cpu>, <&pll6 1>;
+        clock-output-names = "ahb";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
new file mode 100644
index 0000000000..7d6a6a34d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the regular PLL output, the second is a PLL
+      output at twice the rate.
+
+  compatible:
+    const: allwinner,sun6i-a31-pll6-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20028 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun6i-a31-pll6-clk";
+        reg = <0x01c20028 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll6", "pll6x2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
new file mode 100644
index 0000000000..b6202de357
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC TX Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun7i-a20-gmac-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description: >
+      The parent clocks shall be fixed rate dummy clocks at 25 MHz and
+      125 MHz, respectively.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20164 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun7i-a20-gmac-clk";
+        reg = <0x01c20164 0x4>;
+        clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+        clock-output-names = "gmac_tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
new file mode 100644
index 0000000000..fde7f7dc3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 Output Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun7i-a20-out-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c201f0 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun7i-a20-out-clk";
+        reg = <0x01c201f0 0x4>;
+        clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+        clock-output-names = "clk_out_a";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
new file mode 100644
index 0000000000..70369bd633
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-clk
+      - const: allwinner,sun8i-h3-de2-clk
+      - const: allwinner,sun8i-v3s-de2-clk
+      - const: allwinner,sun50i-a64-de2-clk
+      - const: allwinner,sun50i-h5-de2-clk
+      - const: allwinner,sun50i-h6-de3-clk
+      - items:
+          - const: allwinner,sun8i-r40-de2-clk
+          - const: allwinner,sun8i-h3-de2-clk
+      - items:
+          - const: allwinner,sun20i-d1-de2-clk
+          - const: allwinner,sun50i-h5-de2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    de2_clocks: clock@1000000 {
+        compatible = "allwinner,sun8i-h3-de2-clk";
+        reg = <0x01000000 0x100000>;
+        clocks = <&ccu CLK_BUS_DE>,
+                 <&ccu CLK_DE>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
new file mode 100644
index 0000000000..45b9e2c7c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      This additional argument passed to that clock is the offset of
+      the bit controlling this particular gate in the register.
+
+  compatible:
+    const: allwinner,sun8i-h3-bus-gates-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-indices:
+    minItems: 1
+    maxItems: 64
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-indices
+  - clock-names
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20060 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun8i-h3-bus-gates-clk";
+        reg = <0x01c20060 0x14>;
+        clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+        clock-names = "ahb1", "ahb2", "apb1", "apb2";
+        clock-indices = <5>, <6>, <8>,
+                        <9>, <10>, <13>,
+                        <14>, <17>, <18>,
+                        <19>, <20>,
+                        <21>, <23>,
+                        <24>, <25>,
+                        <26>, <27>,
+                        <28>, <29>,
+                        <30>, <31>, <32>,
+                        <35>, <36>, <37>,
+                        <40>, <41>, <43>,
+                        <44>, <52>, <53>,
+                        <54>, <64>,
+                        <65>, <69>, <72>,
+                        <76>, <77>, <78>,
+                        <96>, <97>, <98>,
+                        <112>, <113>,
+                        <114>, <115>,
+                        <116>, <128>, <135>;
+        clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
+                             "bus_mmc1", "bus_mmc2", "bus_nand",
+                             "bus_sdram", "bus_gmac", "bus_ts",
+                             "bus_hstimer", "bus_spi0",
+                             "bus_spi1", "bus_otg",
+                             "bus_otg_ehci0", "bus_ehci1",
+                             "bus_ehci2", "bus_ehci3",
+                             "bus_otg_ohci0", "bus_ohci1",
+                             "bus_ohci2", "bus_ohci3", "bus_ve",
+                             "bus_lcd0", "bus_lcd1", "bus_deint",
+                             "bus_csi", "bus_tve", "bus_hdmi",
+                             "bus_de", "bus_gpu", "bus_msgbox",
+                             "bus_spinlock", "bus_codec",
+                             "bus_spdif", "bus_pio", "bus_ths",
+                             "bus_i2s0", "bus_i2s1", "bus_i2s2",
+                             "bus_i2c0", "bus_i2c1", "bus_i2c2",
+                             "bus_uart0", "bus_uart1",
+                             "bus_uart2", "bus_uart3",
+                             "bus_scr", "bus_ephy", "bus_dbg";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
new file mode 100644
index 0000000000..f0f65af8ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 AHB Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-ahb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@6000060 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-ahb-clk";
+        reg = <0x06000060 0x4>;
+        clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+        clock-output-names = "ahb0";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
new file mode 100644
index 0000000000..e9f9bc8f57
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 APB0 Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun9i-a80-apb0-clk
+      - allwinner,sun9i-a80-apb1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@6000070 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-apb0-clk";
+        reg = <0x06000070 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "apb0";
+    };
+
+  - |
+    clk@6000074 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-apb1-clk";
+        reg = <0x06000074 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "apb1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
new file mode 100644
index 0000000000..c48db2d493
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 CPUS Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-cpus-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@8001410 {
+        compatible = "allwinner,sun9i-a80-cpus-clk";
+        reg = <0x08001410 0x4>;
+        #clock-cells = <0>;
+        clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+        clock-output-names = "cpus";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
new file mode 100644
index 0000000000..e9f81a343b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-de-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: RAM Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: mod
+      - const: dram
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+    #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+    de_clocks: clock@3000000 {
+        compatible = "allwinner,sun9i-a80-de-clks";
+        reg = <0x03000000 0x30>;
+        clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+        clock-names = "mod", "dram", "bus";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
new file mode 100644
index 0000000000..d3ce5eb18d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 GT Bus Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-gt-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@600005c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-gt-clk";
+        reg = <0x0600005c 0x4>;
+        clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+        clock-output-names = "gt";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
new file mode 100644
index 0000000000..65ee5afe83
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 MMC Configuration Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+description: >
+  There is one clock/reset output per mmc controller. The number of
+  outputs is determined by the size of the address block, which is
+  related to the overall mmc block.
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-mmc-config-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 4
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c13000 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-mmc-config-clk";
+        reg = <0x01c13000 0x10>;
+        clocks = <&ahb0_gates 8>;
+        resets = <&ahb0_resets 8>;
+        clock-output-names = "mmc0_config", "mmc1_config",
+                             "mmc2_config", "mmc3_config";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
new file mode 100644
index 0000000000..261264a8ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Peripheral PLL
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-pll4-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@600000c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-pll4-clk";
+        reg = <0x0600000c 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
new file mode 100644
index 0000000000..515c15d5f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
new file mode 100644
index 0000000000..3f7b8d9511
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Module Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-mod-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 6
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@a08000 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-usb-mod-clk";
+        reg = <0x00a08000 0x4>;
+        clocks = <&ahb1_gates 1>;
+        clock-output-names = "usb0_ahb", "usb_ohci0",
+                             "usb1_ahb", "usb_ohci1",
+                             "usb2_ahb", "usb_ohci2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
new file mode 100644
index 0000000000..0d49072d47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Clock
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 6
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@a08004 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-usb-phy-clk";
+        reg = <0x00a08004 0x4>;
+        clocks = <&ahb1_gates 1>;
+        clock-output-names = "usb_phy0", "usb_hsic1_480M",
+                             "usb_phy1", "usb_hsic2_480M",
+                             "usb_phy2", "usb_hsic_12M";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
new file mode 100644
index 0000000000..c9fb9324c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
@@ -0,0 +1,114 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible for choosing proper
+clock source, setting dividers and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM		0
+CLKID_AHB_RAM		1
+CLKID_AHB_GPIO		2
+CLKID_AHB_MAC		3
+CLKID_AHB_EMI		4
+CLKID_AHB_USB0		5
+CLKID_AHB_USB1		6
+CLKID_AHB_DMA0		7
+CLKID_AHB_DMA1		8
+CLKID_AHB_UART0		9
+CLKID_AHB_UART1		10
+CLKID_AHB_UART2		11
+CLKID_AHB_UART3		12
+CLKID_AHB_UART4		13
+CLKID_AHB_UART5		14
+CLKID_AHB_UART6		15
+CLKID_AHB_UART7		16
+CLKID_AHB_UART8		17
+CLKID_AHB_UART9		18
+CLKID_AHB_I2S0		19
+CLKID_AHB_I2C0		20
+CLKID_AHB_I2C1		21
+CLKID_AHB_SSP0		22
+CLKID_AHB_IOCONFIG	23
+CLKID_AHB_WDT		24
+CLKID_AHB_CAN0		25
+CLKID_AHB_CAN1		26
+CLKID_AHB_MPWM		27
+CLKID_AHB_SPI0		28
+CLKID_AHB_SPI1		29
+CLKID_AHB_QEI		30
+CLKID_AHB_QUADSPI0	31
+CLKID_AHB_CAMIF		32
+CLKID_AHB_LCDIF		33
+CLKID_AHB_TIMER0	34
+CLKID_AHB_TIMER1	35
+CLKID_AHB_TIMER2	36
+CLKID_AHB_TIMER3	37
+CLKID_AHB_IRQ		38
+CLKID_AHB_RTC		39
+CLKID_AHB_NAND		40
+CLKID_AHB_ADC0		41
+CLKID_AHB_LED		42
+CLKID_AHB_DAC0		43
+CLKID_AHB_LCD		44
+CLKID_AHB_I2S1		45
+CLKID_AHB_MAC1		46
+
+CLKID_SYS_CPU		47
+CLKID_SYS_AHB		48
+CLKID_SYS_I2S0M		49
+CLKID_SYS_I2S0S		50
+CLKID_SYS_I2S1M		51
+CLKID_SYS_I2S1S		52
+CLKID_SYS_UART0		53
+CLKID_SYS_UART1		54
+CLKID_SYS_UART2		55
+CLKID_SYS_UART3		56
+CLKID_SYS_UART4		56
+CLKID_SYS_UART5		57
+CLKID_SYS_UART6		58
+CLKID_SYS_UART7		59
+CLKID_SYS_UART8		60
+CLKID_SYS_UART9		61
+CLKID_SYS_SPI0		62
+CLKID_SYS_SPI1		63
+CLKID_SYS_QUADSPI	64
+CLKID_SYS_SSP0		65
+CLKID_SYS_NAND		66
+CLKID_SYS_TRACE		67
+CLKID_SYS_CAMM		68
+CLKID_SYS_WDT		69
+CLKID_SYS_CLKOUT	70
+CLKID_SYS_MAC		71
+CLKID_SYS_LCD		72
+CLKID_SYS_ADCANA	73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+	compatible = "alphascale,asm9260-uart";
+	reg = <0x80010000 0x4000>;
+	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+	interrupts = <19>;
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+	compatible = "alphascale,asm9260-timer";
+	reg = <0x80088000 0x4000>;
+	clocks = <&acc CLKID_AHB_TIMER0>;
+	interrupts = <29>;
+};
+
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
new file mode 100644
index 0000000000..f72e80e0da
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -0,0 +1,30 @@
+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"altr,socfpga-pll-clock" - for a PLL clock
+	"altr,socfpga-perip-clock" - The peripheral clock divided from the
+		PLL clock.
+	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+		can get gated.
+
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+        and the bit index.
+- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
+	the divider register, bit shift, and width.
+- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
+	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
+	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
+	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
+	can be 0-315 degrees, in 45 degree increments.
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
new file mode 100644
index 0000000000..6d84cee1bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-peripherals-clkc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-peripherals-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 Peripherals Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-peripherals-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixed pll div2
+      - description: input fixed pll div3
+      - description: input fixed pll div5
+      - description: input fixed pll div7
+      - description: input hifi pll
+      - description: input oscillator (usually at 24MHz)
+
+  clock-names:
+    items:
+      - const: fclk_div2
+      - const: fclk_div3
+      - const: fclk_div5
+      - const: fclk_div7
+      - const: hifi_pll
+      - const: xtal
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@800 {
+            compatible = "amlogic,a1-peripherals-clkc";
+            reg = <0 0x800 0 0x104>;
+            #clock-cells = <1>;
+            clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+                     <&clkc_pll CLKID_FCLK_DIV3>,
+                     <&clkc_pll CLKID_FCLK_DIV5>,
+                     <&clkc_pll CLKID_FCLK_DIV7>,
+                     <&clkc_pll CLKID_HIFI_PLL>,
+                     <&xtal>;
+            clock-names = "fclk_div2", "fclk_div3",
+                          "fclk_div5", "fclk_div7",
+                          "hifi_pll", "xtal";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
new file mode 100644
index 0000000000..a59b188a8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 PLL Clock Control Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Jerome Brunet <jbrunet@baylibre.com>
+  - Jian Hu <jian.hu@jian.hu.com>
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+properties:
+  compatible:
+    const: amlogic,a1-pll-clkc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input fixpll_in
+      - description: input hifipll_in
+
+  clock-names:
+    items:
+      - const: fixpll_in
+      - const: hifipll_in
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+    apb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@7c80 {
+            compatible = "amlogic,a1-pll-clkc";
+            reg = <0 0x7c80 0 0x18c>;
+            #clock-cells = <1>;
+            clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+                     <&clkc_periphs CLKID_HIFIPLL_IN>;
+            clock-names = "fixpll_in", "hifipll_in";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
new file mode 100644
index 0000000000..3a8948c04b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
@@ -0,0 +1,59 @@
+* Amlogic AXG Audio Clock Controllers
+
+The Amlogic AXG audio clock controller generates and supplies clock to the
+other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+devices.
+
+Required Properties:
+
+- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D,
+		  "amlogic,g12a-audio-clkc" for G12A,
+		  "amlogic,sm1-audio-clkc" for S905X3.
+- reg		: physical base address of the clock controller and length of
+		  memory mapped region.
+- clocks	: a list of phandle + clock-specifier pairs for the clocks listed
+		  in clock-names.
+- clock-names	: must contain the following:
+		  * "pclk" - Main peripheral bus clock
+		  may contain the following:
+		  * "mst_in[0-7]" - 8 input plls to generate clock signals
+		  * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
+				      components.
+		  * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
+				       components.
+- resets	: phandle of the internal reset line
+- #clock-cells	: should be 1.
+- #reset-cells  : should be 1 on the g12a (and following) soc family
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
+used in device tree sources.
+
+Example:
+
+clkc_audio: clock-controller@0 {
+	compatible = "amlogic,axg-audio-clkc";
+	reg = <0x0 0x0 0x0 0xb4>;
+	#clock-cells = <1>;
+
+	clocks = <&clkc CLKID_AUDIO>,
+		 <&clkc CLKID_MPLL0>,
+		 <&clkc CLKID_MPLL1>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL3>,
+		 <&clkc CLKID_HIFI_PLL>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_GP0_PLL>;
+	clock-names = "pclk",
+		      "mst_in0",
+		      "mst_in1",
+		      "mst_in2",
+		      "mst_in3",
+		      "mst_in4",
+		      "mst_in5",
+		      "mst_in6",
+		      "mst_in7";
+	resets = <&reset RESET_AUDIO>;
+};
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
new file mode 100644
index 0000000000..628e5dd33d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-aoclkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Always-On Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-aoclkc
+              - amlogic,meson-gxl-aoclkc
+              - amlogic,meson-gxm-aoclkc
+              - amlogic,meson-axg-aoclkc
+          - const: amlogic,meson-gx-aoclkc
+      - enum:
+          - amlogic,meson-axg-aoclkc
+          - amlogic,meson-g12a-aoclkc
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: xtal
+      - const: mpeg-clk
+      - const: ext-32k-0
+      - const: ext-32k-1
+      - const: ext-32k-2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-aoclkc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-aoclkc
+            - amlogic,meson-gxm-aoclkc
+            - amlogic,meson-axg-aoclkc
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
new file mode 100644
index 0000000000..63246f1cb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Clock Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,gxbb-clkc
+      - amlogic,gxl-clkc
+      - amlogic,axg-clkc
+      - amlogic,g12a-clkc
+      - amlogic,g12b-clkc
+      - amlogic,sm1-clkc
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xtal
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
new file mode 100644
index 0000000000..d98d95d8e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic DDR Clock Controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson8-ddr-clkc
+      - amlogic,meson8b-ddr-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ddr_clkc: clock-controller@400 {
+      compatible = "amlogic,meson8-ddr-clkc";
+      reg = <0x400 0x20>;
+      clocks = <&xtal>;
+      clock-names = "xtal";
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
new file mode 100644
index 0000000000..cc51e4746b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
@@ -0,0 +1,51 @@
+* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
+
+The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
+supplies clock to various controllers within the SoC.
+
+Required Properties:
+
+- compatible: must be one of:
+	- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
+	- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
+	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+  * "xtal": the 24MHz system oscillator
+  * "ddr_pll": the DDR PLL clock
+  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+- reg: base address and size of the HHI system control register space.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be
+used in device tree sources.
+
+Similarly a preprocessor macro for each reset line is defined in
+dt-bindings/reset/amlogic,meson8b-clkc-reset.h (which can be used from the
+device tree sources).
+
+
+Example: Clock controller node:
+
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart_AO: serial@c81004c0 {
+		compatible = "amlogic,meson-uart";
+		reg = <0xc81004c0 0x14>;
+		interrupts = <0 90 1>;
+		clocks = <&clkc CLKID_CLK81>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml
new file mode 100644
index 0000000000..8b8411dc42
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-nco
+          - apple,t8103-nco
+          - apple,t8112-nco
+      - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
new file mode 100644
index 0000000000..b5533f8130
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/arm,syscon-icst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System Controller ICST Clocks
+
+maintainers:
+  - Linus Walleij <linusw@kernel.org>
+
+description: |
+  The ICS525 and ICS307 oscillators are produced by Integrated
+  Devices Technology (IDT). ARM integrated these oscillators deeply into their
+  reference designs by adding special control registers that manage such
+  oscillators to their system controllers.
+
+  The various ARM system controllers contain logic to serialize and initialize
+  an ICST clock request after a write to the 32 bit register at an offset
+  into the system controller. Furthermore, to even be able to alter one of
+  these frequencies, the system controller must first be unlocked by
+  writing a special token to another offset in the system controller.
+
+  Some ARM hardware contain special versions of the serial interface that only
+  connects the low 8 bits of the VDW (missing one bit), hard-wires RDW to
+  different values and sometimes also hard-wires the output divider. They
+  therefore have special compatible strings as per this table (the OD value is
+  the value on the pins, not the resulting output divider).
+
+  In the core modules and logic tiles, the ICST is a configurable clock fed
+  from a 24 MHz clock on the motherboard (usually the main crystal) used for
+  generating e.g. video clocks. It is located on the core module and there is
+  only one of these. This clock node must be a subnode of the core module.
+
+  Hardware variant         RDW     OD          VDW
+
+  Integrator/AP            22      1           Bit 8 0, rest variable
+  integratorap-cm
+
+  Integrator/AP            46      3           Bit 8 0, rest variable
+  integratorap-sys
+
+  Integrator/AP            22 or   1           17 or (33 or 25 MHz)
+  integratorap-pci         14      1           14
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-core
+
+  Integrator/CP            22      variable    Bit 8 0, rest variable
+  integratorcp-cm-mem
+
+  The ICST oscillator must be provided inside a system controller node.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - arm,syscon-icst525
+      - arm,syscon-icst307
+      - arm,syscon-icst525-integratorap-cm
+      - arm,syscon-icst525-integratorap-sys
+      - arm,syscon-icst525-integratorap-pci
+      - arm,syscon-icst525-integratorcp-cm-core
+      - arm,syscon-icst525-integratorcp-cm-mem
+      - arm,integrator-cm-auxosc
+      - arm,versatile-cm-auxosc
+      - arm,impd1-vco1
+      - arm,impd1-vco2
+
+  reg:
+    maxItems: 1
+    description: The VCO register
+
+  clocks:
+    description: Parent clock for the ICST VCO
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+  lock-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset to the unlocking register for the oscillator
+
+  vco-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset to the VCO register for the oscillator
+    deprecated: true
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    vco1: clock {
+      compatible = "arm,impd1-vco1";
+      #clock-cells = <0>;
+      lock-offset = <0x08>;
+      vco-offset = <0x00>;
+      clocks = <&sysclk>;
+      clock-output-names = "IM-PD1-VCO1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
new file mode 100644
index 0000000000..fbf58c443c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-periph-clock.txt
@@ -0,0 +1,71 @@
+* Peripheral Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide peripheral clocks which are
+used as clock source for the peripheral of the SoC.
+
+There are two different blocks associated to north bridge and south
+bridge.
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs for Armada 3700 North bridge clocks:
+ID	Clock name	Description
+-----------------------------------
+0	mmc		MMC controller
+1	sata_host	Sata Host
+2	sec_at		Security AT
+3	sac_dap		Security DAP
+4	tsecm		Security Engine
+5	setm_tmx	Serial Embedded Trace Module
+6	avs		Adaptive Voltage Scaling
+7	sqf		SPI
+8	pwm		PWM
+9	i2c_2		I2C 2
+10	i2c_1		I2C 1
+11	ddr_phy		DDR PHY
+12	ddr_fclk	DDR F clock
+13	trace		Trace
+14	counter		Counter
+15	eip97		EIP 97
+16	cpu		CPU
+
+The following is a list of provided IDs for Armada 3700 South bridge clocks:
+ID	Clock name	Description
+-----------------------------------
+0	gbe-50		50 MHz parent clock for Gigabit Ethernet
+1	gbe-core	parent clock for Gigabit Ethernet core
+2	gbe-125		125 MHz parent clock for Gigabit Ethernet
+3	gbe1-50		50 MHz clock for Gigabit Ethernet port 1
+4	gbe0-50		50 MHz clock for Gigabit Ethernet port 0
+5	gbe1-125	125 MHz clock for Gigabit Ethernet port 1
+6	gbe0-125	125 MHz clock for Gigabit Ethernet port 0
+7	gbe1-core	Gigabit Ethernet core port 1
+8	gbe0-core	Gigabit Ethernet core port 0
+9	gbe-bm		Gigabit Ethernet Buffer Manager
+10	sdio		SDIO
+11	usb32-sub2-sys	USB 2 clock
+12	usb32-ss-sys	USB 3 clock
+13	pcie		PCIe controller
+
+Required properties:
+
+- compatible : shall be "marvell,armada-3700-periph-clock-nb" for the
+  north bridge block, or
+  "marvell,armada-3700-periph-clock-sb" for the south bridge block
+- reg : must be the register address of North/South Bridge Clock register
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks : list of the parent clock phandle in the following order:
+  TBG-A P, TBG-B P, TBG-A S, TBG-B S and finally the xtal clock.
+
+
+Example:
+
+nb_perih_clk: nb-periph-clk@13000{
+	compatible = "marvell,armada-3700-periph-clock-nb";
+	reg = <0x13000 0x1000>;
+	clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+	<&tbg 3>, <&xtalclk>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
new file mode 100644
index 0000000000..ed1df32c57
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-tbg-clock.txt
@@ -0,0 +1,27 @@
+* Time Base Generator Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs provide Time Base Generator clocks which are
+used as parent clocks for the peripheral clocks.
+
+The TBG clock consumer should specify the desired clock by having the
+clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 3700:
+ 0 = TBG A P
+ 1 = TBG B P
+ 2 = TBG A S
+ 3 = TBG B S
+
+Required properties:
+- compatible : shall be "marvell,armada-3700-tbg-clock"
+- reg : must be the register address of North Bridge PLL register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Example:
+
+tbg: tbg@13200 {
+	compatible = "marvell,armada-3700-tbg-clock";
+	reg = <0x13200 0x1000>;
+	clocks = <&xtalclk>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
new file mode 100644
index 0000000000..4c0807f28c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
@@ -0,0 +1,29 @@
+* Xtal Clock bindings for Marvell Armada 37xx SoCs
+
+Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
+reading the gpio latch register.
+
+This node must be a subnode of the node exposing the register address
+of the GPIO block where the gpio latch is located.
+See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-3700-xtal-clock"
+- #clock-cells : from common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("xtal")
+
+Example:
+pinctrl_nb: pinctrl-nb@13800 {
+	compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
+	reg = <0x13800 0x100>, <0x13C00 0x20>;
+
+	xtalclk: xtal-clk {
+		compatible = "marvell,armada-3700-xtal-clock";
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/artpec6.txt b/Documentation/devicetree/bindings/clock/artpec6.txt
new file mode 100644
index 0000000000..dff9cdf000
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/artpec6.txt
@@ -0,0 +1,41 @@
+* Clock bindings for Axis ARTPEC-6 chip
+
+The bindings are based on the clock provider binding in
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+External clocks:
+----------------
+
+There are two external inputs to the main clock controller which should be
+provided using the common clock bindings.
+- "sys_refclk": External 50 Mhz oscillator (required)
+- "i2s_refclk": Alternate audio reference clock (optional).
+
+Main clock controller
+---------------------
+
+Required properties:
+- #clock-cells: Should be <1>
+  See dt-bindings/clock/axis,artpec6-clkctrl.h for the list of valid identifiers.
+- compatible: Should be "axis,artpec6-clkctrl"
+- reg: Must contain the base address and length of the system controller
+- clocks:  Must contain a phandle entry for each clock in clock-names
+- clock-names: Must include the external oscillator ("sys_refclk"). Optional
+  ones are the audio reference clock ("i2s_refclk") and the audio fractional
+  dividers ("frac_clk0" and "frac_clk1").
+
+Examples:
+
+ext_clk: ext_clk {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <50000000>;
+};
+
+clkctrl: clkctrl@f8000000 {
+	#clock-cells = <1>;
+	compatible = "axis,artpec6-clkctrl";
+	reg = <0xf8000000 0x48>;
+	clocks = <&ext_clk>;
+	clock-names = "sys_refclk";
+};
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
new file mode 100644
index 0000000000..c1bdcd9058
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Power Management Controller (PMC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The power management controller optimizes power consumption by controlling all
+  system and user peripheral clocks. The PMC enables/disables the clock inputs
+  to many of the peripherals and to the processor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9g20-pmc
+          - const: atmel,at91sam9260-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91sam9g15-pmc
+              - atmel,at91sam9g25-pmc
+              - atmel,at91sam9g35-pmc
+              - atmel,at91sam9x25-pmc
+              - atmel,at91sam9x35-pmc
+          - const: atmel,at91sam9x5-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g45-pmc
+              - atmel,at91sam9n12-pmc
+              - atmel,at91sam9rl-pmc
+              - atmel,at91sam9x5-pmc
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    description: |
+      - 1st cell is the clock type, one of PMC_TYPE_CORE, PMC_TYPE_SYSTEM,
+        PMC_TYPE_PERIPHERAL, PMC_TYPE_GCK, PMC_TYPE_PROGRAMMABLE (as defined
+        in <dt-bindings/clock/at91.h>)
+      - 2nd cell is the clock identifier as defined in <dt-bindings/clock/at91.h
+        (for core clocks) or as defined in datasheet (for system, peripheral,
+        gck and programmable clocks).
+    const: 2
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  atmel,osc-bypass:
+    description: set when a clock signal is directly provided on XIN
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-pmc
+              - microchip,sama7g5-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: td_slck
+            - const: md_slck
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,at91rm9200-pmc
+              - atmel,at91sam9260-pmc
+              - atmel,at91sam9g20-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_xtal
+            - const: main_xtal
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d2-pmc
+              - atmel,sama5d3-pmc
+              - atmel,sama5d4-pmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: slow_clk
+            - const: main_xtal
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmc: clock-controller@f0018000 {
+        compatible = "atmel,sama5d4-pmc", "syscon";
+        reg = <0xf0018000 0x120>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        #clock-cells = <2>;
+        clocks = <&clk32k>, <&main_xtal>;
+        clock-names = "slow_clk", "main_xtal";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
new file mode 100644
index 0000000000..7be29877e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/atmel,at91sam9x5-sckc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/atmel,at91sam9x5-sckc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Slow Clock Controller (SCKC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9x5-sckc
+          - atmel,sama5d3-sckc
+          - atmel,sama5d4-sckc
+          - microchip,sam9x60-sckc
+      - items:
+          - const: microchip,sama7g5-sckc
+          - const: microchip,sam9x60-sckc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    enum: [0, 1]
+
+  atmel,osc-bypass:
+    type: boolean
+    description: set when a clock signal is directly provided on XIN
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sam9x60-sckc
+    then:
+      properties:
+        "#clock-cells":
+          const: 1
+    else:
+      properties:
+        "#clock-cells":
+          const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    clk32k: clock-controller@fffffe50 {
+        compatible = "microchip,sam9x60-sckc";
+        reg = <0xfffffe50 0x4>;
+        clocks = <&slow_xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
new file mode 100644
index 0000000000..5ffc8df7e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
@@ -0,0 +1,25 @@
+Binding for the AXS10X I2S PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "snps,axs10x-i2s-pll-clock"
+- reg : address and length of the I2S PLL register set.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	pll_clock: pll_clock {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	i2s_clock@100a0 {
+		compatible = "snps,axs10x-i2s-pll-clock";
+		reg = <0x100a0 0x10>;
+		clocks = <&pll_clock>;
+		#clock-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
new file mode 100644
index 0000000000..bd4cefbb12
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit Dividers
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
+  later ones are described in this binding. Each clock domain can be also
+  individually reset by using the domain clocks divider configuration
+  registers. Baikal-T1 CCU is logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs).
+  3) AXI-bus clock dividers (AXI) - described in this binding file.
+  4) System devices reference clock dividers (SYS) - described in this binding
+     file.
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each sub-block is represented as a separate DT node and has an individual
+  driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are
+  then passed over CCU dividers to create signals required for the target clock
+  domain (like AXI-bus or System Device consumers). The dividers have the
+  following structure:
+
+          +--------------+
+  CLKIN --|->+----+ 1|\  |
+  SETCLK--|--|/DIV|->| | |
+  CLKDIV--|--|    |  | |-|->CLKLOUT
+  LOCK----|--+----+  | | |
+          |          |/  |
+          |           |  |
+  EN------|-----------+  |
+  RST-----|--------------|->RSTOUT
+          +--------------+
+
+  where CLKIN is the reference clock coming either from CCU PLLs or from an
+  external clock oscillator, SETCLK - a command to update the output clock in
+  accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of
+  the output clock stabilization, EN - enable/disable the divider block,
+  RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core
+  peculiarities the dividers may lack of some functionality depicted on the
+  figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding
+  clock provider just doesn't expose either switching functions, or the rate
+  configuration, or both of them.
+
+  The clock dividers, which output clock is then consumed by the SoC individual
+  devices, are united into a single clocks provider called System Devices CCU.
+  Similarly the dividers with output clocks utilized as AXI-bus reference clocks
+  are called AXI-bus CCU. Both of them use the common clock bindings with no
+  custom properties. The list of exported clocks and reset signals can be found
+  in the files: 'include/dt-bindings/clock/bt1-ccu.h' and
+  'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU
+  are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed
+  to be a children of later one.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: baikal,bt1-ccu-axi
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: External reference clock
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: ref_clk
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+properties:
+  compatible:
+    enum:
+      - baikal,bt1-ccu-axi
+      - baikal,bt1-ccu-sys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks: true
+
+  clock-names: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # AXI-bus Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d030 {
+      compatible = "baikal,bt1-ccu-axi";
+      reg = <0x1f04d030 0x030>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "sata_clk", "pcie_clk", "eth_clk";
+    };
+  # System Devices Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d060 {
+      compatible = "baikal,bt1-ccu-sys";
+      reg = <0x1f04d060 0x0a0>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&clk25m>,
+               <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "ref_clk", "sata_clk", "pcie_clk",
+                    "eth_clk";
+    };
+  # Required Clock Control Unit PLL node:
+  - |
+    ccu_pll: clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
new file mode 100644
index 0000000000..624984d51c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit PLL
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
+  It's logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs) - described in this binding file.
+  3) AXI-bus clock dividers (AXI).
+  4) System devices reference clock dividers (SYS).
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each CCU sub-block is represented as a separate dts-node and has an
+  individual driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. There are five PLLs
+  to create a clock for the MIPS P5600 cores, the embedded DDR controller,
+  SATA, Ethernet and PCIe domains. The last three domains though named by the
+  biggest system interfaces in fact include nearly all of the rest SoC
+  peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
+  with an interface wrapper (so called safe PLL' clocks switcher) to simplify
+  the PLL configuration procedure. The PLLs work as depicted on the next
+  diagram:
+
+      +--------------------------+
+      |                          |
+      +-->+---+    +---+   +---+ |  +---+   0|\
+  CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
+          +---+ +->+---+   +---+ /->+---+    | |--->CLKOUT
+  CLKOD---------C----------------+          1| |
+       +--------C--------------------------->|/
+       |        |                             ^
+  Rclk-+->+---+ |                             |
+  CLKR--->|/NR|-+                             |
+          +---+                               |
+  BYPASS--------------------------------------+
+  BWADJ--->
+
+  where Rclk is the reference clock coming  from XTAL, NR - reference clock
+  divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
+  output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
+  the binding supports the PLL dividers configuration in accordance with a
+  requested rate, while bypassing and bandwidth adjustment settings can be
+  added in future if it gets to be necessary.
+
+  The PLLs CLKOUT is then either directly connected with the corresponding
+  clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
+  divider to create a signal required for the clock domain.
+
+  The CCU PLL dts-node uses the common clock bindings with no custom
+  parameters. The list of exported clocks can be found in
+  'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
+  Baikal-T1 SoC System Controller its DT node is supposed to be a child of
+  later one.
+
+properties:
+  compatible:
+    const: baikal,bt1-ccu-pll
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: External reference clock
+    maxItems: 1
+
+  clock-names:
+    const: ref_clk
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Unit PLL node:
+  - |
+    clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+  # Required external oscillator:
+  - |
+    clk25m: clock-oscillator-25m {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency  = <25000000>;
+      clock-output-names = "clk25m";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
new file mode 100644
index 0000000000..f0f9392470
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/bitmain,bm1880-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain BM1880 Clock Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  The Bitmain BM1880 clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+  This binding uses common clock bindings
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    const: bitmain,bm1880-clk
+
+  reg:
+    items:
+      - description: pll registers
+      - description: system registers
+
+  reg-names:
+    items:
+      - const: pll
+      - const: sys
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clk: clock-controller@e8 {
+        compatible = "bitmain,bm1880-clk";
+        reg = <0xe8 0x0c>, <0x800 0xb0>;
+        reg-names = "pll", "sys";
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
new file mode 100644
index 0000000000..2d40df2d34
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI DVP
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: brcm,brcm2711-dvp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dvp: clock@7ef00000 {
+        compatible = "brcm,brcm2711-dvp";
+        reg = <0x7ef00000 0x10>;
+        clocks = <&clk_108MHz>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
new file mode 100644
index 0000000000..4acfc8f641
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt
@@ -0,0 +1,31 @@
+Broadcom BCM2835 auxiliary peripheral support
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+area controlling clock gating to the peripherals, and providing an IRQ
+status register.
+
+Required properties:
+- compatible:	Should be "brcm,bcm2835-aux"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835-aux.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	The parent clock phandle
+
+Example:
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	aux: aux@7e215004 {
+		compatible = "brcm,bcm2835-aux";
+		#clock-cells = <1>;
+		reg = <0x7e215000 0x8>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 0000000000..9e0b03a651
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,60 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835.  There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels.  Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible:	should be one of the following,
+	"brcm,bcm2711-cprman"
+	"brcm,bcm2835-cprman"
+- #clock-cells:	Should be <1>. The permitted clock-specifier values can be
+		  found in include/dt-bindings/clock/bcm2835.h
+- reg:		Specifies base physical address and size of the registers
+- clocks:	phandles to the parent clocks used as input to the module, in
+		  the following order:
+
+		  - External oscillator
+		  - DSI0 byte clock
+		  - DSI0 DDR2 clock
+		  - DSI0 DDR clock
+		  - DSI1 byte clock
+		  - DSI1 DDR2 clock
+		  - DSI1 DDR clock
+
+		  Only external oscillator is required.  The DSI clocks may
+		  not be present, in which case their children will be
+		  unusable.
+
+Example:
+
+	clk_osc: clock@3 {
+		compatible = "fixed-clock";
+		reg = <3>;
+		#clock-cells = <0>;
+		clock-output-names = "osc";
+		clock-frequency = <19200000>;
+	};
+
+	clocks: cprman@7e101000 {
+		compatible = "brcm,bcm2835-cprman";
+		#clock-cells = <1>;
+		reg = <0x7e101000 0x2000>;
+		clocks = <&clk_osc>;
+	};
+
+	i2c0: i2c@7e205000 {
+		compatible = "brcm,bcm2835-i2c";
+		reg = <0x7e205000 0x1000>;
+		interrupts = <2 21>;
+		clocks = <&clocks BCM2835_CLOCK_VPU>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
new file mode 100644
index 0000000000..2ebb107331
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
@@ -0,0 +1,36 @@
+Broadcom BCM53573 ILP clock
+===========================
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+This binding is used for ILP clock (sometimes referred as "slow clock")
+on Broadcom BCM53573 devices using Cortex-A7 CPU.
+
+ILP's rate has to be calculated on runtime and it depends on ALP clock
+which has to be referenced.
+
+This clock is part of PMU (Power Management Unit), a Broadcom's device
+handing power-related aspects. Its node must be sub-node of the PMU
+device.
+
+Required properties:
+- compatible: "brcm,bcm53573-ilp"
+- clocks: has to reference an ALP clock
+- #clock-cells: should be <0>
+- clock-output-names: from common clock bindings, should contain clock
+		      name
+
+Example:
+
+pmu@18012000 {
+	compatible = "simple-mfd", "syscon";
+	reg = <0x18012000 0x00001000>;
+
+	ilp {
+		compatible = "brcm,bcm53573-ilp";
+		clocks = <&alp>;
+		#clock-cells = <0>;
+		clock-output-names = "ilp";
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
new file mode 100644
index 0000000000..cd0d763ce2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 Timer Clock and Reset
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm63268-timer-clocks
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    timer_clk: clock-controller@100000ac {
+      compatible = "brcm,bcm63268-timer-clocks";
+      reg = <0x100000ac 0x4>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
new file mode 100644
index 0000000000..3e7ca55307
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt
@@ -0,0 +1,24 @@
+Gated Clock Controller Bindings for MIPS based BCM63XX SoCs
+
+Required properties:
+- compatible: must be one of:
+	 "brcm,bcm3368-clocks"
+	 "brcm,bcm6318-clocks"
+	 "brcm,bcm6318-ubus-clocks"
+	 "brcm,bcm6328-clocks"
+	 "brcm,bcm6358-clocks"
+	 "brcm,bcm6362-clocks"
+	 "brcm,bcm6368-clocks"
+	 "brcm,bcm63268-clocks"
+
+- reg: Address and length of the register set
+- #clock-cells: must be <1>
+
+
+Example:
+
+clkctl: clock-controller@10000004 {
+	compatible = "brcm,bcm6328-clocks";
+	reg = <0x10000004 0x4>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
new file mode 100644
index 0000000000..5ad147d265
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@@ -0,0 +1,417 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc Family Clocks
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  The iProc clock controller manages clocks that are common to the iProc family.
+  An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL,
+  LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+  comprises of several leaf clocks
+
+  ASIU clocks are a special case. These clocks are derived directly from the
+  reference clock of the onboard crystal.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm63138-armpll
+      - brcm,cygnus-armpll
+      - brcm,cygnus-genpll
+      - brcm,cygnus-lcpll0
+      - brcm,cygnus-mipipll
+      - brcm,cygnus-asiu-clk
+      - brcm,cygnus-audiopll
+      - brcm,hr2-armpll
+      - brcm,nsp-armpll
+      - brcm,nsp-genpll
+      - brcm,nsp-lcpll0
+      - brcm,ns2-genpll-scr
+      - brcm,ns2-genpll-sw
+      - brcm,ns2-lcpll-ddr
+      - brcm,ns2-lcpll-ports
+      - brcm,sr-genpll0
+      - brcm,sr-genpll1
+      - brcm,sr-genpll2
+      - brcm,sr-genpll3
+      - brcm,sr-genpll4
+      - brcm,sr-genpll5
+      - brcm,sr-genpll6
+      - brcm,sr-lcpll0
+      - brcm,sr-lcpll1
+      - brcm,sr-lcpll-pcie
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: power register
+      - description: ASIU or split status register
+
+  clocks:
+    description: The input parent clock phandle for the PLL / ASIU clock. For
+      most iProc PLLs, this is an onboard crystal with a fixed rate.
+    maxItems: 1
+
+  '#clock-cells':
+    true
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 45
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,nsp-armpll
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+    else:
+      properties:
+        '#clock-cells':
+          const: 1
+      required:
+        - clock-output-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,cygnus-genpll
+              - brcm,cygnus-lcpll0
+              - brcm,cygnus-mipipll
+              - brcm,cygnus-asiu-clk
+              - brcm,cygnus-audiopll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Cygnus.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-cygnus.h"
+
+            Clock      	Source (Parent)	Index	ID
+            -----	---------------	-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            keypad	crystal (ASIU)	0	BCM_CYGNUS_ASIU_KEYPAD_CLK
+            adc/tsc	crystal (ASIU)	1	BCM_CYGNUS_ASIU_ADC_CLK
+            pwm	crystal (ASIU)		2	BCM_CYGNUS_ASIU_PWM_CLK
+
+            genpll	crystal		0	BCM_CYGNUS_GENPLL
+            axi21	genpll		1	BCM_CYGNUS_GENPLL_AXI21_CLK
+            250mhz	genpll		2	BCM_CYGNUS_GENPLL_250MHZ_CLK
+            ihost_sys	genpll		3	BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+            enet_sw	genpll		4	BCM_CYGNUS_GENPLL_ENET_SW_CLK
+            audio_125	genpll		5	BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+            can		genpll		6	BCM_CYGNUS_GENPLL_CAN_CLK
+
+            lcpll0	crystal		0	BCM_CYGNUS_LCPLL0
+            pcie_phy	lcpll0		1	BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+            ddr_phy	lcpll0		2	BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+            sdio	lcpll0		3	BCM_CYGNUS_LCPLL0_SDIO_CLK
+            usb_phy	lcpll0		4	BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+            smart_card	lcpll0		5	BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+            ch5_unused	lcpll0		6	BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+            mipipll	crystal		0	BCM_CYGNUS_MIPIPLL
+            ch0_unused	mipipll		1	BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+            ch1_lcd	mipipll		2	BCM_CYGNUS_MIPIPLL_CH1_LCD
+            ch2_v3d	mipipll		3	BCM_CYGNUS_MIPIPLL_CH2_V3D
+            ch3_unused	mipipll		4	BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+            ch4_unused	mipipll		5	BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+            ch5_unused	mipipll		6	BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+            audiopll	crystal		0	BCM_CYGNUS_AUDIOPLL
+            ch0_audio	audiopll	1	BCM_CYGNUS_AUDIOPLL_CH0
+            ch1_audio	audiopll	2	BCM_CYGNUS_AUDIOPLL_CH1
+            ch2_audio	audiopll	3	BCM_CYGNUS_AUDIOPLL_CH2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,hr2-armpll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock for Hurricane 2:
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-armpll
+              - brcm,nsp-genpll
+              - brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar and
+            Northstar Plus.  These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-nsp.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            genpll	crystal		0	BCM_NSP_GENPLL
+            phy		genpll		1	BCM_NSP_GENPLL_PHY_CLK
+            ethernetclk	genpll		2	BCM_NSP_GENPLL_ENET_SW_CLK
+            usbclk	genpll		3	BCM_NSP_GENPLL_USB_PHY_REF_CLK
+            iprocfast	genpll		4	BCM_NSP_GENPLL_IPROCFAST_CLK
+            sata1	genpll		5	BCM_NSP_GENPLL_SATA1_CLK
+            sata2	genpll		6	BCM_NSP_GENPLL_SATA2_CLK
+
+            lcpll0	crystal		0	BCM_NSP_LCPLL0
+            pcie_phy	lcpll0		1	BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+            sdio	lcpll0		2	BCM_NSP_LCPLL0_SDIO_CLK
+            ddr_phy	lcpll0		3	BCM_NSP_LCPLL0_DDR_PHY_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-genpll-scr
+              - brcm,ns2-genpll-sw
+              - brcm,ns2-lcpll-ddr
+              - brcm,ns2-lcpll-ports
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar 2.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-ns2.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            genpll_scr	crystal		0	BCM_NS2_GENPLL_SCR
+            scr		genpll_scr	1	BCM_NS2_GENPLL_SCR_SCR_CLK
+            fs		genpll_scr	2	BCM_NS2_GENPLL_SCR_FS_CLK
+            audio_ref	genpll_scr	3	BCM_NS2_GENPLL_SCR_AUDIO_CLK
+            ch3_unused	genpll_scr	4	BCM_NS2_GENPLL_SCR_CH3_UNUSED
+            ch4_unused	genpll_scr	5	BCM_NS2_GENPLL_SCR_CH4_UNUSED
+            ch5_unused	genpll_scr	6	BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+            genpll_sw	crystal		0	BCM_NS2_GENPLL_SW
+            rpe		genpll_sw	1	BCM_NS2_GENPLL_SW_RPE_CLK
+            250		genpll_sw	2	BCM_NS2_GENPLL_SW_250_CLK
+            nic		genpll_sw	3	BCM_NS2_GENPLL_SW_NIC_CLK
+            chimp	genpll_sw	4	BCM_NS2_GENPLL_SW_CHIMP_CLK
+            port	genpll_sw	5	BCM_NS2_GENPLL_SW_PORT_CLK
+            sdio	genpll_sw	6	BCM_NS2_GENPLL_SW_SDIO_CLK
+
+            lcpll_ddr	crystal		0	BCM_NS2_LCPLL_DDR
+            pcie_sata_usb lcpll_ddr	1	BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+            ddr		lcpll_ddr	2	BCM_NS2_LCPLL_DDR_DDR_CLK
+            ch2_unused	lcpll_ddr	3	BCM_NS2_LCPLL_DDR_CH2_UNUSED
+            ch3_unused	lcpll_ddr	4	BCM_NS2_LCPLL_DDR_CH3_UNUSED
+            ch4_unused	lcpll_ddr	5	BCM_NS2_LCPLL_DDR_CH4_UNUSED
+            ch5_unused	lcpll_ddr	6	BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+            lcpll_ports	crystal		0	BCM_NS2_LCPLL_PORTS
+            wan		lcpll_ports	1	BCM_NS2_LCPLL_PORTS_WAN_CLK
+            rgmii	lcpll_ports	2	BCM_NS2_LCPLL_PORTS_RGMII_CLK
+            ch2_unused	lcpll_ports	3	BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+            ch3_unused	lcpll_ports	4	BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+            ch4_unused	lcpll_ports	5	BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+            ch5_unused	lcpll_ports	6	BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,sr-genpll0
+              - brcm,sr-genpll1
+              - brcm,sr-genpll2
+              - brcm,sr-genpll3
+              - brcm,sr-genpll4
+              - brcm,sr-genpll5
+              - brcm,sr-genpll6
+              - brcm,sr-lcpll0
+              - brcm,sr-lcpll1
+              - brcm,sr-lcpll-pcie
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Stingray.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-sr.h"
+
+            Clock		Source		Index	ID
+            -----		------		-----	--
+            crystal		N/A		N/A	N/A
+            crmu_ref25m		crystal		N/A	N/A
+
+            genpll0		crystal		0	BCM_SR_GENPLL0
+            clk_125m		genpll0		1	BCM_SR_GENPLL0_125M_CLK
+            clk_scr		genpll0		2	BCM_SR_GENPLL0_SCR_CLK
+            clk_250		genpll0		3	BCM_SR_GENPLL0_250M_CLK
+            clk_pcie_axi	genpll0		4	BCM_SR_GENPLL0_PCIE_AXI_CLK
+            clk_paxc_axi_x2	genpll0		5	BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+            clk_paxc_axi	genpll0		6	BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+            genpll1		crystal		0	BCM_SR_GENPLL1
+            clk_pcie_tl		genpll1		1	BCM_SR_GENPLL1_PCIE_TL_CLK
+            clk_mhb_apb		genpll1		2	BCM_SR_GENPLL1_MHB_APB_CLK
+
+            genpll2		crystal		0	BCM_SR_GENPLL2
+            clk_nic		genpll2		1	BCM_SR_GENPLL2_NIC_CLK
+            clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
+            clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
+            clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
+            clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+            clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
+
+            genpll3		crystal		0	BCM_SR_GENPLL3
+            clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
+            clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
+
+            genpll4		crystal		0	BCM_SR_GENPLL4
+            clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+            clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
+            clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+            clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
+            clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+            genpll5		crystal		0	BCM_SR_GENPLL5
+            clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+            clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+            clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+
+            genpll6		crystal		0	BCM_SR_GENPLL6
+            clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+
+            lcpll0		crystal		0	BCM_SR_LCPLL0
+            clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
+            clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
+            clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+            clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
+
+            lcpll1		crystal		0	BCM_SR_LCPLL1
+            clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+            clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+            clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
+
+            lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
+            clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,cygnus-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: axi21
+            - const: 250mhz
+            - const: ihost_sys
+            - const: enet_sw
+            - const: audio_125
+            - const: can
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: lcpll0
+            - const: pcie_phy
+            - const: sdio
+            - const: ddr_phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: phy
+            - const: ethernetclk
+            - const: usbclk
+            - const: iprocfast
+            - const: sata1
+            - const: sata2
+
+required:
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    osc1: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    genpll@301d000 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-genpll";
+        reg = <0x301d000 0x2c>, <0x301c020 0x4>;
+        clocks = <&os1c>;
+        clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+                     "enet_sw", "audio_125", "can";
+    };
+  - |
+    osc2: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    asiu_clks@301d048 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-asiu-clk";
+        reg = <0x301d048 0xc>, <0x180aa024 0x4>;
+        clocks = <&osc2>;
+        clock-output-names = "keypad", "adc/touch", "pwm";
+    };
+  - |
+    arm_clk@0 {
+        #clock-cells = <0>;
+        compatible = "brcm,nsp-armpll";
+        clocks = <&osc>;
+        reg = <0x0 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
new file mode 100644
index 0000000000..8e5a7d8685
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,kona-ccu.txt
@@ -0,0 +1,138 @@
+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs).  A CCU is a clock provider that manages
+a set of clock signals.  Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+	Shall have a value of the form "brcm,<model>-<which>-ccu",
+	where <model> is a Broadcom SoC model number and <which> is
+	the name of a defined CCU.  For example:
+	    "brcm,bcm11351-root-ccu"
+	The compatible strings used for each supported SoC family
+	are defined below.
+- reg
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells
+	Shall have value <1>.  The permitted clock-specifier values
+	are defined below.
+- clock-output-names
+	Shall be an ordered list of strings defining the names of
+	the clocks provided by the CCU.
+
+Device tree example:
+
+	slave_ccu: slave_ccu {
+		compatible = "brcm,bcm11351-slave-ccu";
+		reg = <0x3e011000 0x0f00>;
+		#clock-cells = <1>;
+		clock-output-names = "uartb",
+				     "uartb2",
+				     "uartb3",
+				     "uartb4";
+	};
+
+	ref_crystal_clk: ref_crystal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+BCM281XX family
+---------------
+CCU compatible string values for SoCs in the BCM281XX family are:
+    "brcm,bcm11351-root-ccu"
+    "brcm,bcm11351-aon-ccu"
+    "brcm,bcm11351-hub-ccu"
+    "brcm,bcm11351-master-ccu"
+    "brcm,bcm11351-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM281XX family clocks.  When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used.  These specifiers are defined in:
+    "include/dt-bindings/clock/bcm281xx.h"
+
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
+
+    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
+    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
+    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
+
+    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
+
+    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
+    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
+    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
+    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
+    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
+
+    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
+    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
+    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
+    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
+    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
+    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
+    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
+
+
+BCM21664 family
+---------------
+CCU compatible string values for SoCs in the BCM21664 family are:
+    "brcm,bcm21664-root-ccu"
+    "brcm,bcm21664-aon-ccu"
+    "brcm,bcm21664-master-ccu"
+    "brcm,bcm21664-slave-ccu"
+
+The following table defines the set of CCUs and clock specifiers for
+BCM21664 family clocks.  When a clock consumer references a clocks,
+its symbolic specifier (rather than its numeric index value) should
+be used.  These specifiers are defined in:
+    "include/dt-bindings/clock/bcm21664.h"
+
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM21664_ROOT_CCU_FRAC_1M
+
+    aon     hub_timer       peri      0     BCM21664_AON_CCU_HUB_TIMER
+
+    master  sdio1           peri      0     BCM21664_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM21664_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM21664_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM21664_MASTER_CCU_SDIO4
+    master  sdio1_sleep     peri      4     BCM21664_MASTER_CCU_SDIO1_SLEEP
+    master  sdio2_sleep     peri      5     BCM21664_MASTER_CCU_SDIO2_SLEEP
+    master  sdio3_sleep     peri      6     BCM21664_MASTER_CCU_SDIO3_SLEEP
+    master  sdio4_sleep     peri      7     BCM21664_MASTER_CCU_SDIO4_SLEEP
+
+    slave   uartb           peri      0     BCM21664_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM21664_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM21664_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM21664_SLAVE_CCU_UARTB4
+    slave   bsc1            peri      4     BCM21664_SLAVE_CCU_BSC1
+    slave   bsc2            peri      5     BCM21664_SLAVE_CCU_BSC2
+    slave   bsc3            peri      6     BCM21664_SLAVE_CCU_BSC3
+    slave   bsc4            peri      7     BCM21664_SLAVE_CCU_BSC4
diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml
new file mode 100644
index 0000000000..a88fbe20fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/calxeda.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/calxeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda highbank platform Clock Controller
+
+description: |
+  This binding covers the Calxeda SoC internal peripheral and bus clocks
+  as used by peripherals. The clocks live inside the "system register"
+  region of the SoC, so are typically presented as children of an
+  "hb-sregs" node.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - calxeda,hb-pll-clock
+      - calxeda,hb-a9periph-clock
+      - calxeda,hb-a9bus-clock
+      - calxeda,hb-emmc-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sregs@3fffc000 {
+        compatible = "calxeda,hb-sregs";
+        reg = <0x3fffc000 0x1000>;
+
+        clocks {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            osc: oscillator {
+                #clock-cells = <0>;
+                compatible = "fixed-clock";
+                clock-frequency = <33333000>;
+            };
+
+            ddrpll: ddrpll@108 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x108>;
+            };
+
+            a9pll: a9pll@100 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-pll-clock";
+                clocks = <&osc>;
+                reg = <0x100>;
+            };
+
+            a9periphclk: a9periphclk@104 {
+                #clock-cells = <0>;
+                compatible = "calxeda,hb-a9periph-clock";
+                clocks = <&a9pll>;
+                reg = <0x104>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
new file mode 100644
index 0000000000..380cb6d800
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Clock
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description: |
+  Canaan Kendryte K210 SoC clocks driver bindings. The clock
+  controller node must be defined as a child node of the K210
+  system controller node.
+
+  See also:
+  - dt-bindings/clock/k210-clk.h
+
+properties:
+  compatible:
+    const: canaan,k210-clk
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle of the SoC 26MHz fixed-rate oscillator clock.
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    clocks {
+      in0: oscillator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    /* ... */
+    sysclk: clock-controller {
+      #clock-cells = <1>;
+      compatible = "canaan,k210-clk";
+      clocks = <&in0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 0000000000..d416c374e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..59de125647
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the clock portion of the
+  driver.
+
+  Also see these documents for generic binding information:
+    [1] Clock : ../clock/clock-bindings.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/clock/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [3] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1-clk
+      - cirrus,lochnagar2-clk
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number, see [2] for available
+      clocks and [1].
+    const: 1
+
+  clock-names:
+    items:
+      enum:
+        - ln-cdc-clkout # Output clock from CODEC card.
+        - ln-dsp-clkout # Output clock from DSP card.
+        - ln-gf-mclk1 # Optional input clock from host system.
+        - ln-gf-mclk2 # Optional input clock from host system.
+        - ln-gf-mclk3 # Optional input clock from host system.
+        - ln-gf-mclk4 # Optional input clock from host system.
+        - ln-psia1-mclk # Optional input clock from external connector.
+        - ln-psia2-mclk # Optional input clock from external connector.
+        - ln-spdif-mclk # Optional input clock from SPDIF.
+        - ln-spdif-clkout # Optional input clock from SPDIF.
+        - ln-adat-mclk # Optional input clock from ADAT.
+        - ln-pmic-32k # On board fixed clock.
+        - ln-clk-12m # On board fixed clock.
+        - ln-clk-11m # On board fixed clock.
+        - ln-clk-24m # On board fixed clock.
+        - ln-clk-22m # On board fixed clock.
+        - ln-clk-8m # On board fixed clock.
+        - ln-usb-clk-24m # On board fixed clock.
+        - ln-usb-clk-12m # On board fixed clock.
+    minItems: 1
+    maxItems: 19
+
+  clocks: true
+  assigned-clocks: true
+  assigned-clock-parents: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#clock-cells'
diff --git a/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt b/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt
new file mode 100644
index 0000000000..4208886d83
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt
@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible :	"ti,palmas-clk32kg" for clk32kg clock
+		"ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+	enable/disable of clocks.  The external enable input pins ENABLE1,
+	ENABLE2 and NSLEEP. The valid values for the external pins are:
+		PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+		PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+		PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+	Option 0 or missing this property means the clock is enabled/disabled
+	via register access and these pins do not have any control.
+	The macros of external control pins for DTS is defined at
+	dt-bindings/mfd/palmas.h
+
+Example:
+	#include <dt-bindings/mfd/palmas.h>
+	...
+	palmas: tps65913@58 {
+		...
+		clk32kg: palmas_clk32k@0 {
+			compatible = "ti,palmas-clk32kg";
+			#clock-cells = <0>;
+			ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
new file mode 100644
index 0000000000..6fe5413688
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -0,0 +1,2 @@
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/clps711x-clock.txt b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
new file mode 100644
index 0000000000..f1bd53f79d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clps711x-clock.txt
@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible       : Shall contain "cirrus,ep7209-clk".
+- reg              : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells     : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+	clks: clks@80000000 {
+		#clock-cells = <1>;
+		compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk";
+		reg = <0x80000000 0xc000>;
+		startup-frequency = <73728000>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
new file mode 100644
index 0000000000..217871f483
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals.  These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID	Clock
+-------------
+0	AXI bus clock
+1	GPU clock
+2	VMeta clock
+3	LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+   Control 0 register.  This will cover that register, as well as the
+   Core PLL and Clock Divider Control 1 register.  Thus, it will have
+   a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@64 {
+	compatible = "marvell,dove-divider-clock";
+	reg = <0x0064 0x8>;
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
new file mode 100644
index 0000000000..b0a4fb8256
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple fixed-rate clock sources
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  compatible:
+    const: fixed-clock
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-accuracy:
+    description: accuracy of clock in ppb (parts per billion).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clock-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <1000000000>;
+      clock-accuracy = <100>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
new file mode 100644
index 0000000000..8f71ab3004
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple fixed factor rate clock sources
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - fixed-factor-clock
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-div:
+    description: Fixed divider
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  clock-mult:
+    description: Fixed multiplier
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - "#clock-cells"
+  - clock-div
+  - clock-mult
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+      compatible = "fixed-factor-clock";
+      clocks = <&parentclk>;
+      #clock-cells = <0>;
+      clock-div = <2>;
+      clock-mult = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
new file mode 100644
index 0000000000..e22fc272d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple memory mapped IO fixed-rate clock sources
+
+description:
+  This binding describes a fixed-rate clock for which the frequency can
+  be read from a single 32-bit memory mapped I/O register.
+
+  It was designed for test systems, like FPGA, not for complete,
+  finished SoCs.
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    const: fixed-mmio-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    sysclock: sysclock@fd020004 {
+      compatible = "fixed-mmio-clock";
+      #clock-cells = <0>;
+      reg = <0xfd020004 0x4>;
+      clock-output-names = "sysclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml
new file mode 100644
index 0000000000..1fa390ee7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,flexspi-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,flexspi-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FlexSPI clock driver for Layerscape SoCs
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The Freescale Layerscape SoCs have a special FlexSPI clock which is
+  derived from the platform PLL.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1028a-flexspi-clk
+      - fsl,lx2160a-flexspi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    dcfg {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fspi_clk: clock-controller@900 {
+            compatible = "fsl,ls1028a-flexspi-clk";
+            reg = <0x900 0x4>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+            clock-output-names = "fspi_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml
new file mode 100644
index 0000000000..07b9d21719
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx8-acm.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8-acm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 Audio Clock Mux
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  NXP i.MX8 Audio Clock Mux is dedicated clock muxing IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8dxl-acm
+      - fsl,imx8qm-acm
+      - fsl,imx8qxp-acm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    minItems: 13
+    maxItems: 21
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8-clock.h
+      for the full list of i.MX8 ACM clock IDs.
+
+  clocks:
+    minItems: 13
+    maxItems: 27
+
+  clock-names:
+    minItems: 13
+    maxItems: 27
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_ASRC_1
+            - description: power domain of IMX_SC_R_ESAI_0
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SAI_4
+            - description: power domain of IMX_SC_R_SAI_5
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 18
+          maxItems: 18
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: esai0_rx_clk
+            - const: esai0_rx_hf_clk
+            - const: esai0_tx_clk
+            - const: esai0_tx_hf_clk
+            - const: spdif0_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+            - const: sai4_rx_bclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_ASRC_1
+            - description: power domain of IMX_SC_R_ESAI_0
+            - description: power domain of IMX_SC_R_ESAI_1
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SAI_4
+            - description: power domain of IMX_SC_R_SAI_5
+            - description: power domain of IMX_SC_R_SAI_6
+            - description: power domain of IMX_SC_R_SAI_7
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_SPDIF_1
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 27
+          maxItems: 27
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: mlb_clk
+            - const: hdmi_rx_mclk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: esai0_rx_clk
+            - const: esai0_rx_hf_clk
+            - const: esai0_tx_clk
+            - const: esai0_tx_hf_clk
+            - const: esai1_rx_clk
+            - const: esai1_rx_hf_clk
+            - const: esai1_tx_clk
+            - const: esai1_tx_hf_clk
+            - const: spdif0_rx
+            - const: spdif1_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+            - const: sai4_rx_bclk
+            - const: sai5_tx_bclk
+            - const: sai6_rx_bclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8dxl-acm
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: power domain of IMX_SC_R_AUDIO_CLK_0
+            - description: power domain of IMX_SC_R_AUDIO_CLK_1
+            - description: power domain of IMX_SC_R_MCLK_OUT_0
+            - description: power domain of IMX_SC_R_MCLK_OUT_1
+            - description: power domain of IMX_SC_R_AUDIO_PLL_0
+            - description: power domain of IMX_SC_R_AUDIO_PLL_1
+            - description: power domain of IMX_SC_R_ASRC_0
+            - description: power domain of IMX_SC_R_SAI_0
+            - description: power domain of IMX_SC_R_SAI_1
+            - description: power domain of IMX_SC_R_SAI_2
+            - description: power domain of IMX_SC_R_SAI_3
+            - description: power domain of IMX_SC_R_SPDIF_0
+            - description: power domain of IMX_SC_R_MQS_0
+
+        clocks:
+          minItems: 13
+          maxItems: 13
+
+        clock-names:
+          items:
+            - const: aud_rec_clk0_lpcg_clk
+            - const: aud_rec_clk1_lpcg_clk
+            - const: aud_pll_div_clk0_lpcg_clk
+            - const: aud_pll_div_clk1_lpcg_clk
+            - const: ext_aud_mclk0
+            - const: ext_aud_mclk1
+            - const: spdif0_rx
+            - const: sai0_rx_bclk
+            - const: sai0_tx_bclk
+            - const: sai1_rx_bclk
+            - const: sai1_tx_bclk
+            - const: sai2_rx_bclk
+            - const: sai3_rx_bclk
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    clock-controller@59e00000 {
+        compatible = "fsl,imx8qxp-acm";
+        reg = <0x59e00000 0x1d0000>;
+        #clock-cells = <1>;
+        power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+                        <&pd IMX_SC_R_AUDIO_CLK_1>,
+                        <&pd IMX_SC_R_MCLK_OUT_0>,
+                        <&pd IMX_SC_R_MCLK_OUT_1>,
+                        <&pd IMX_SC_R_AUDIO_PLL_0>,
+                        <&pd IMX_SC_R_AUDIO_PLL_1>,
+                        <&pd IMX_SC_R_ASRC_0>,
+                        <&pd IMX_SC_R_ASRC_1>,
+                        <&pd IMX_SC_R_ESAI_0>,
+                        <&pd IMX_SC_R_SAI_0>,
+                        <&pd IMX_SC_R_SAI_1>,
+                        <&pd IMX_SC_R_SAI_2>,
+                        <&pd IMX_SC_R_SAI_3>,
+                        <&pd IMX_SC_R_SAI_4>,
+                        <&pd IMX_SC_R_SAI_5>,
+                        <&pd IMX_SC_R_SPDIF_0>,
+                        <&pd IMX_SC_R_MQS_0>;
+        clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+                 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+                 <&clk_ext_aud_mclk0>,
+                 <&clk_ext_aud_mclk1>,
+                 <&clk_esai0_rx_clk>,
+                 <&clk_esai0_rx_hf_clk>,
+                 <&clk_esai0_tx_clk>,
+                 <&clk_esai0_tx_hf_clk>,
+                 <&clk_spdif0_rx>,
+                 <&clk_sai0_rx_bclk>,
+                 <&clk_sai0_tx_bclk>,
+                 <&clk_sai1_rx_bclk>,
+                 <&clk_sai1_tx_bclk>,
+                 <&clk_sai2_rx_bclk>,
+                 <&clk_sai3_rx_bclk>,
+                 <&clk_sai4_rx_bclk>;
+        clock-names = "aud_rec_clk0_lpcg_clk",
+                      "aud_rec_clk1_lpcg_clk",
+                      "aud_pll_div_clk0_lpcg_clk",
+                      "aud_pll_div_clk1_lpcg_clk",
+                      "ext_aud_mclk0",
+                      "ext_aud_mclk1",
+                      "esai0_rx_clk",
+                      "esai0_rx_hf_clk",
+                      "esai0_tx_clk",
+                      "esai0_tx_hf_clk",
+                      "spdif0_rx",
+                      "sai0_rx_bclk",
+                      "sai0_tx_bclk",
+                      "sai1_rx_bclk",
+                      "sai1_tx_bclk",
+                      "sai2_rx_bclk",
+                      "sai3_rx_bclk",
+                      "sai4_rx_bclk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml
new file mode 100644
index 0000000000..bbd22e95b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Anatop Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX8M Family anatop PLL module which generates PLL to CCM root.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-anatop
+          - fsl,imx8mq-anatop
+      - items:
+          - enum:
+              - fsl,imx8mn-anatop
+              - fsl,imx8mp-anatop
+          - const: fsl,imx8mm-anatop
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    anatop: clock-controller@30360000 {
+        compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+        reg = <0x30360000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
new file mode 100644
index 0000000000..88dd9c18db
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock
+
+maintainers:
+  - Wen He <wen.he_1@nxp.com>
+
+description: |
+  NXP LS1028A has a clock domain PXLCLK0 used for the Display output
+  interface in the display core, as implemented in TSMC CLN28HPM PLL.
+  which generate and offers pixel clocks to Display.
+
+properties:
+  compatible:
+    const: fsl,ls1028a-plldig
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  fsl,vco-hz:
+    description: Optional for VCO frequency of the PLL in Hertz. The VCO frequency
+      of this PLL cannot be changed during runtime only at startup. Therefore,
+      the output frequencies are very limited and might not even closely match
+      the requested frequency. To work around this restriction the user may specify
+      its own desired VCO frequency for the PLL.
+    minimum: 650000000
+    maximum: 1300000000
+    default: 1188000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Display PIXEL Clock node:
+  - |
+    dpclk: clock-display@f1f0000 {
+        compatible = "fsl,ls1028a-plldig";
+        reg = <0xf1f0000 0xffff>;
+        #clock-cells = <0>;
+        clocks = <&osc_27m>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
new file mode 100644
index 0000000000..3bca9d11c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAI bitclock-as-a-clock
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  It is possible to use the BCLK pin of a SAI module as a generic clock
+  output. Some SoC are very constrained in their pin multiplexer
+  configuration. Eg. pins can only be changed groups. For example, on the
+  LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI,
+  the second pins are wasted. Using this binding it is possible to use the
+  clock of the second SAI as a MCLK clock for an audio codec, for example.
+
+  This is a composite of a gated clock and a divider clock.
+
+properties:
+  compatible:
+    const: fsl,vf610-sai-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mclk: clock-mclk@f130080 {
+            compatible = "fsl,vf610-sai-clock";
+            reg = <0x0 0xf130080 0x0 0x80>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 0000000000..36d4cfc3c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock Controller Based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
new file mode 100644
index 0000000000..3323962656
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fujitsu,mb86s70-crg11.txt
@@ -0,0 +1,26 @@
+Fujitsu CRG11 clock driver bindings
+-----------------------------------
+
+Required properties :
+- compatible : Shall contain "fujitsu,mb86s70-crg11"
+- #clock-cells : Shall be 3 {cntrlr domain port}
+
+The consumer specifies the desired clock pointing to its phandle.
+
+Example:
+
+	clock: crg11 {
+		compatible = "fujitsu,mb86s70-crg11";
+		#clock-cells = <3>;
+	};
+
+	mhu: mhu0@2b1f0000 {
+		#mbox-cells = <1>;
+		compatible = "arm,mhu";
+		reg = <0 0x2B1F0000 0x1000>;
+		interrupts = <0 36 4>, /* LP Non-Sec */
+			     <0 35 4>, /* HP Non-Sec */
+			     <0 37 4>; /* Secure */
+		clocks = <&clock 0 2 1>; /* Cntrlr:0 Domain:2 Port:1 */
+		clock-names = "clk";
+	};
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
new file mode 100644
index 0000000000..d09d0e3f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml
new file mode 100644
index 0000000000..1e21f8b3a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-mux-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-mux-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock multiplexer
+
+maintainers:
+  - Sergej Sawazki <ce3a@gmx.de>
+
+properties:
+  compatible:
+    const: gpio-mux-clock
+
+  clocks:
+    items:
+      - description: First parent clock
+      - description: Second parent clock
+
+  '#clock-cells':
+    const: 0
+
+  select-gpios:
+    description: GPIO reference for selecting the parent clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - select-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+            compatible = "gpio-mux-clock";
+            clocks = <&parentclk1>, <&parentclk2>;
+            #clock-cells = <0>;
+            select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
new file mode 100644
index 0000000000..dad6269f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3620-clock.txt
@@ -0,0 +1,20 @@
+* Hisilicon Hi3620 Clock Controller
+
+The Hi3620 clock controller generates and supplies clock to various
+controllers within the Hi3620 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
+  - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.
diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt
new file mode 100644
index 0000000000..946da7cee5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt
@@ -0,0 +1,47 @@
+* Hisilicon Hi3660 Clock Controller
+
+The Hi3660 clock controller generates and supplies clock to various
+controllers within the Hi3660 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi3660-crgctrl"
+	- "hisilicon,hi3660-pctrl"
+	- "hisilicon,hi3660-pmuctrl"
+	- "hisilicon,hi3660-sctrl"
+	- "hisilicon,hi3660-iomcu"
+	- "hisilicon,hi3660-stub-clk"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Optional Properties:
+
+- mboxes: Phandle to the mailbox for sending message to MCU.
+            (See: ../mailbox/hisilicon,hi3660-mailbox.txt for more info)
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>.
+
+Examples:
+	crg_ctrl: clock-controller@fff35000 {
+		compatible = "hisilicon,hi3660-crgctrl", "syscon";
+		reg = <0x0 0xfff35000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@fdf02000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0xfdf02000 0x0 0x1000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+			 <&crg_ctrl HI3660_PCLK>;
+		clock-names = "uartclk", "apb_pclk";
+	};
diff --git a/Documentation/devicetree/bindings/clock/hi3670-clock.txt b/Documentation/devicetree/bindings/clock/hi3670-clock.txt
new file mode 100644
index 0000000000..66f3697eca
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi3670-clock.txt
@@ -0,0 +1,43 @@
+* Hisilicon Hi3670 Clock Controller
+
+The Hi3670 clock controller generates and supplies clock to various
+controllers within the Hi3670 SoC.
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi3670-crgctrl"
+	- "hisilicon,hi3670-pctrl"
+	- "hisilicon,hi3670-pmuctrl"
+	- "hisilicon,hi3670-sctrl"
+	- "hisilicon,hi3670-iomcu"
+	- "hisilicon,hi3670-media1-crg"
+	- "hisilicon,hi3670-media2-crg"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3670-clock.h>.
+
+Examples:
+	crg_ctrl: clock-controller@fff35000 {
+		compatible = "hisilicon,hi3670-crgctrl", "syscon";
+		reg = <0x0 0xfff35000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: serial@fdf02000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0xfdf02000 0x0 0x1000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+			 <&crg_ctrl HI3670_PCLK>;
+		clock-names = "uartclk", "apb_pclk";
+	};
diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
new file mode 100644
index 0000000000..17ac4a3dd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -0,0 +1,52 @@
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,hi6220-acpu-sctrl"
+	- "hisilicon,hi6220-aoctrl"
+	- "hisilicon,hi6220-sysctrl"
+	- "hisilicon,hi6220-mediactrl"
+	- "hisilicon,hi6220-pmctrl"
+	- "hisilicon,hi6220-stub-clk"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Optional Properties:
+
+- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram;
+  the driver need use the sram to pass parameters for frequency change.
+
+- mboxes: use the label reference for the mailbox as the first parameter, the
+  second parameter is the channel number.
+
+Example 1:
+	sys_ctrl: sys_ctrl@f7030000 {
+		compatible = "hisilicon,hi6220-sysctrl", "syscon";
+		reg = <0x0 0xf7030000 0x0 0x2000>;
+		#clock-cells = <1>;
+	};
+
+Example 2:
+	stub_clock: stub_clock {
+		compatible = "hisilicon,hi6220-stub-clk";
+		hisilicon,hi6220-clk-sram = <&sram>;
+		#clock-cells = <1>;
+		mboxes = <&mailbox 1>;
+	};
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.
diff --git a/Documentation/devicetree/bindings/clock/hisi-crg.txt b/Documentation/devicetree/bindings/clock/hisi-crg.txt
new file mode 100644
index 0000000000..cc60b3d423
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisi-crg.txt
@@ -0,0 +1,50 @@
+* HiSilicon Clock and Reset Generator(CRG)
+
+The CRG module provides clock and reset signals to various
+modules within the SoC.
+
+This binding uses the following bindings:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+    Documentation/devicetree/bindings/reset/reset.txt
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3516cv300-crg"
+  - "hisilicon,hi3516cv300-sysctrl"
+  - "hisilicon,hi3519-crg"
+  - "hisilicon,hi3798cv200-crg"
+  - "hisilicon,hi3798cv200-sysctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>.
+
+- #reset-cells: should be 2.
+
+A reset signal can be controlled by writing a bit register in the CRG module.
+The reset specifier consists of two cells. The first cell represents the
+register offset relative to the base address. The second cell represents the
+bit index in the register.
+
+Example: CRG nodes
+CRG: clock-reset-controller@12010000 {
+	compatible = "hisilicon,hi3519-crg";
+	reg = <0x12010000 0x10000>;
+	#clock-cells = <1>;
+	#reset-cells = <2>;
+};
+
+Example: consumer nodes
+i2c0: i2c@12110000 {
+	compatible = "hisilicon,hi3519-i2c";
+	reg = <0x12110000 0x1000>;
+	clocks = <&CRG HI3519_I2C0_RST>;
+	resets = <&CRG 0xe4 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
new file mode 100644
index 0000000000..3ceb29cec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisilicon,hi3559av100-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/hisilicon,hi3559av100-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon SOC Clock for HI3559AV100
+
+maintainers:
+  - Dongjiu Geng <gengdongjiu@huawei.com>
+
+description: |
+  Hisilicon SOC clock control module which supports the clocks, resets and
+  power domains on HI3559AV100.
+
+  See also:
+    dt-bindings/clock/hi3559av100-clock.h
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hi3559av100-clock
+      - hisilicon,hi3559av100-shub-clock
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 2
+    description: |
+      First cell is reset request register offset.
+      Second cell is bit offset in reset request register.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@12010000 {
+            compatible = "hisilicon,hi3559av100-clock";
+            #clock-cells = <1>;
+            #reset-cells = <2>;
+            reg = <0x0 0x12010000 0x0 0x10000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
new file mode 100644
index 0000000000..a2c6eea987
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT VersaClock 5 and 6 programmable I2C clock generators
+
+description: |
+  The IDT VersaClock 5 and VersaClock 6 are programmable I2C
+  clock generators providing from 3 to 12 output clocks.
+
+  When referencing the provided clock in the DT using phandle and clock
+  specifier, the following mapping applies:
+
+  - 5P49V5923:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT2
+
+  - 5P49V5933:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT4
+
+  - other parts:
+    0 -- OUT0_SEL_I2CB
+    1 -- OUT1
+    2 -- OUT2
+    3 -- OUT3
+    4 -- OUT4
+
+  The idt,shutdown and idt,output-enable-active properties control the
+  SH (en_global_shutdown) and SP bits of the Primary Source and Shutdown
+  Register, respectively. Their behavior is summarized by the following
+  table:
+
+  SH SP Output when the SD/OE pin is Low/High
+  == == =====================================
+   0  0 Active/Inactive
+   0  1 Inactive/Active
+   1  0 Active/Shutdown
+   1  1 Inactive/Shutdown
+
+  The case where SH and SP are both 1 is likely not very interesting.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,5p49v5923
+      - idt,5p49v5925
+      - idt,5p49v5933
+      - idt,5p49v5935
+      - idt,5p49v60
+      - idt,5p49v6901
+      - idt,5p49v6965
+      - idt,5p49v6975
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ xin, clkin ]
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  idt,xtal-load-femtofarads:
+    minimum: 9000
+    maximum: 22760
+    description: Optional load capacitor for XTAL1 and XTAL2
+
+  idt,shutdown:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      If 1, this enables the shutdown functionality: the chip will be
+      shut down if the SD/OE pin is driven high. If 0, this disables the
+      shutdown functionality: the chip will never be shut down based on
+      the value of the SD/OE pin. This property corresponds to the SH
+      bit of the Primary Source and Shutdown Register.
+
+  idt,output-enable-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      If 1, this enables output when the SD/OE pin is high, and disables
+      output when the SD/OE pin is low. If 0, this disables output when
+      the SD/OE pin is high, and enables output when the SD/OE pin is
+      low. This corresponds to the SP bit of the Primary Source and
+      Shutdown Register.
+
+patternProperties:
+  "^OUT[1-4]$":
+    type: object
+    description:
+      Description of one of the outputs (OUT1..OUT4). See "Clock1 Output
+      Configuration" in the Versaclock 5/6/6E Family Register Description
+      and Programming Guide.
+    properties:
+      idt,mode:
+        description:
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+      idt,voltage-microvolt:
+        description: The output drive voltage.
+        enum: [ 1800000, 2500000, 3300000 ]
+      idt,slew-percent:
+        description: The Slew rate control for CMOS single-ended.
+        enum: [ 80, 85, 90, 100 ]
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - idt,shutdown
+  - idt,output-enable-active
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - idt,5p49v5933
+            - idt,5p49v5935
+            - idt,5p49v6975
+    then:
+      # Devices with builtin crystal + optional external input
+      properties:
+        clock-names:
+          const: clkin
+        clocks:
+          maxItems: 1
+    else:
+      # Devices without builtin crystal
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/versaclock.h>
+
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* IDT 5P49V5923 I2C clock generator */
+        vc5: clock-generator@6a {
+            compatible = "idt,5p49v5923";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            /* Connect XIN input to 25MHz reference */
+            clocks = <&ref25m>;
+            clock-names = "xin";
+
+            /* Set the SD/OE pin's settings */
+            idt,shutdown = <0>;
+            idt,output-enable-active = <0>;
+
+            OUT1 {
+                idt,mode = <VC5_CMOSD>;
+                idt,voltage-microvolt = <1800000>;
+                idt,slew-percent = <80>;
+            };
+
+            OUT4 {
+                idt,mode = <VC5_LVDS>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/img,boston-clock.txt b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
new file mode 100644
index 0000000000..7bc5e9ffb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -0,0 +1,31 @@
+Binding for Imagination Technologies MIPS Boston clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The device node must be a child node of the syscon node corresponding to the
+Boston system's platform registers.
+
+Required properties:
+- compatible : Should be "img,boston-clock".
+- #clock-cells : Should be set to 1.
+  Values available for clock consumers can be found in the header file:
+    <dt-bindings/clock/boston-clock.h>
+
+Example:
+
+	system-controller@17ffd000 {
+		compatible = "img,boston-platform-regs", "syscon";
+		reg = <0x17ffd000 0x1000>;
+
+		clk_boston: clock {
+			compatible = "img,boston-clock";
+			#clock-cells = <1>;
+		};
+	};
+
+	uart0: uart@17ffe000 {
+		/* ... */
+		clocks = <&clk_boston BOSTON_CLK_SYS>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
new file mode 100644
index 0000000000..7ade4c32af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX1 CPUs Clock Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+  for the full list of i.MX1 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx1-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx1-clock.h>
+
+    clock-controller@21b000 {
+        #clock-cells = <1>;
+        compatible = "fsl,imx1-ccm";
+        reg = <0x0021b000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
new file mode 100644
index 0000000000..79cc843703
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX21 Clock Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+  for the full list of i.MX21 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx21-ccm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx21-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx21-ccm";
+        reg = <0x10027000 0x800>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
new file mode 100644
index 0000000000..5e71c92195
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX23 Clock Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX23
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll		1
+        ref_cpu		2
+        ref_emi		3
+        ref_pix		4
+        ref_io		5
+        saif_sel	6
+        lcdif_sel	7
+        gpmi_sel	8
+        ssp_sel		9
+        emi_sel		10
+        cpu		11
+        etm_sel		12
+        cpu_pll		13
+        cpu_xtal	14
+        hbus		15
+        xbus		16
+        lcdif_div	17
+        ssp_div		18
+        gpmi_div	19
+        emi_pll		20
+        emi_xtal	21
+        etm_div		22
+        saif_div	23
+        clk32k_div	24
+        rtc		25
+        adc		26
+        spdif_div	27
+        clk32k		28
+        dri		29
+        pwm		30
+        filt		31
+        uart		32
+        ssp		33
+        gpmi		34
+        spdif		35
+        emi		36
+        saif		37
+        lcdif		38
+        etm		39
+        usb		40
+        usb_phy		41
+
+properties:
+  compatible:
+    const: fsl,imx23-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx23-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
new file mode 100644
index 0000000000..c626a15859
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX25 Clock Controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX25
+  clocks and IDs.
+
+        Clock			ID
+        --------------------------
+        dummy			0
+        osc			1
+        mpll			2
+        upll			3
+        mpll_cpu_3_4		4
+        cpu_sel			5
+        cpu			6
+        ahb			7
+        usb_div			8
+        ipg			9
+        per0_sel		10
+        per1_sel		11
+        per2_sel		12
+        per3_sel		13
+        per4_sel		14
+        per5_sel		15
+        per6_sel		16
+        per7_sel		17
+        per8_sel		18
+        per9_sel		19
+        per10_sel		20
+        per11_sel		21
+        per12_sel		22
+        per13_sel		23
+        per14_sel		24
+        per15_sel		25
+        per0			26
+        per1			27
+        per2			28
+        per3			29
+        per4			30
+        per5			31
+        per6			32
+        per7			33
+        per8			34
+        per9			35
+        per10			36
+        per11			37
+        per12			38
+        per13			39
+        per14			40
+        per15			41
+        csi_ipg_per		42
+        epit_ipg_per		43
+        esai_ipg_per		44
+        esdhc1_ipg_per		45
+        esdhc2_ipg_per		46
+        gpt_ipg_per		47
+        i2c_ipg_per		48
+        lcdc_ipg_per		49
+        nfc_ipg_per		50
+        owire_ipg_per		51
+        pwm_ipg_per		52
+        sim1_ipg_per		53
+        sim2_ipg_per		54
+        ssi1_ipg_per		55
+        ssi2_ipg_per		56
+        uart_ipg_per		57
+        ata_ahb			58
+        reserved		59
+        csi_ahb			60
+        emi_ahb			61
+        esai_ahb		62
+        esdhc1_ahb		63
+        esdhc2_ahb		64
+        fec_ahb			65
+        lcdc_ahb		66
+        rtic_ahb		67
+        sdma_ahb		68
+        slcdc_ahb		69
+        usbotg_ahb		70
+        reserved		71
+        reserved		72
+        reserved		73
+        reserved		74
+        can1_ipg		75
+        can2_ipg		76
+        csi_ipg			77
+        cspi1_ipg		78
+        cspi2_ipg		79
+        cspi3_ipg		80
+        dryice_ipg		81
+        ect_ipg			82
+        epit1_ipg		83
+        epit2_ipg		84
+        reserved		85
+        esdhc1_ipg		86
+        esdhc2_ipg		87
+        fec_ipg			88
+        reserved		89
+        reserved		90
+        reserved		91
+        gpt1_ipg		92
+        gpt2_ipg		93
+        gpt3_ipg		94
+        gpt4_ipg		95
+        reserved		96
+        reserved		97
+        reserved		98
+        iim_ipg			99
+        reserved		100
+        reserved		101
+        kpp_ipg			102
+        lcdc_ipg		103
+        reserved		104
+        pwm1_ipg		105
+        pwm2_ipg		106
+        pwm3_ipg		107
+        pwm4_ipg		108
+        rngb_ipg		109
+        reserved		110
+        scc_ipg			111
+        sdma_ipg		112
+        sim1_ipg		113
+        sim2_ipg		114
+        slcdc_ipg		115
+        spba_ipg		116
+        ssi1_ipg		117
+        ssi2_ipg		118
+        tsc_ipg			119
+        uart1_ipg		120
+        uart2_ipg		121
+        uart3_ipg		122
+        uart4_ipg		123
+        uart5_ipg		124
+        reserved		125
+        wdt_ipg			126
+        cko_div			127
+        cko_sel			128
+        cko			129
+
+properties:
+  compatible:
+    const: fsl,imx25-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx25-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
new file mode 100644
index 0000000000..71d78a0b55
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX27 Clock Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+  for the full list of i.MX27 clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx27-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    clock-controller@10027000 {
+        compatible = "fsl,imx27-ccm";
+        reg = <0x10027000 0x1000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
new file mode 100644
index 0000000000..4aaad7b9c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX28 Clock Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX28
+  clocks and IDs.
+
+        Clock		ID
+        ------------------
+        ref_xtal	0
+        pll0		1
+        pll1		2
+        pll2		3
+        ref_cpu		4
+        ref_emi		5
+        ref_io0		6
+        ref_io1		7
+        ref_pix		8
+        ref_hsadc	9
+        ref_gpmi	10
+        saif0_sel	11
+        saif1_sel	12
+        gpmi_sel	13
+        ssp0_sel	14
+        ssp1_sel	15
+        ssp2_sel	16
+        ssp3_sel	17
+        emi_sel		18
+        etm_sel		19
+        lcdif_sel	20
+        cpu		21
+        ptp_sel		22
+        cpu_pll		23
+        cpu_xtal	24
+        hbus		25
+        xbus		26
+        ssp0_div	27
+        ssp1_div	28
+        ssp2_div	29
+        ssp3_div	30
+        gpmi_div	31
+        emi_pll		32
+        emi_xtal	33
+        lcdif_div	34
+        etm_div		35
+        ptp		36
+        saif0_div	37
+        saif1_div	38
+        clk32k_div	39
+        rtc		40
+        lradc		41
+        spdif_div	42
+        clk32k		43
+        pwm		44
+        uart		45
+        ssp0		46
+        ssp1		47
+        ssp2		48
+        ssp3		49
+        gpmi		50
+        spdif		51
+        emi		52
+        saif0		53
+        saif1		54
+        lcdif		55
+        etm		56
+        fec		57
+        can0		58
+        can1		59
+        usb0		60
+        usb1		61
+        usb0_phy	62
+        usb1_phy	63
+        enet_out	64
+
+properties:
+  compatible:
+    const: fsl,imx28-clkctrl
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@80040000 {
+        compatible = "fsl,imx28-clkctrl";
+        reg = <0x80040000 0x2000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
new file mode 100644
index 0000000000..50a8498eef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX31 Clock Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX31
+  clocks and IDs.
+
+        Clock		    ID
+        -----------------------
+        dummy	             0
+        ckih                 1
+        ckil                 2
+        mpll                 3
+        spll                 4
+        upll                 5
+        mcu_main             6
+        hsp                  7
+        ahb                  8
+        nfc                  9
+        ipg                  10
+        per_div              11
+        per                  12
+        csi_sel              13
+        fir_sel              14
+        csi_div              15
+        usb_div_pre          16
+        usb_div_post         17
+        fir_div_pre          18
+        fir_div_post         19
+        sdhc1_gate           20
+        sdhc2_gate           21
+        gpt_gate             22
+        epit1_gate           23
+        epit2_gate           24
+        iim_gate             25
+        ata_gate             26
+        sdma_gate            27
+        cspi3_gate           28
+        rng_gate             29
+        uart1_gate           30
+        uart2_gate           31
+        ssi1_gate            32
+        i2c1_gate            33
+        i2c2_gate            34
+        i2c3_gate            35
+        hantro_gate          36
+        mstick1_gate         37
+        mstick2_gate         38
+        csi_gate             39
+        rtc_gate             40
+        wdog_gate            41
+        pwm_gate             42
+        sim_gate             43
+        ect_gate             44
+        usb_gate             45
+        kpp_gate             46
+        ipu_gate             47
+        uart3_gate           48
+        uart4_gate           49
+        uart5_gate           50
+        owire_gate           51
+        ssi2_gate            52
+        cspi1_gate           53
+        cspi2_gate           54
+        gacc_gate            55
+        emi_gate             56
+        rtic_gate            57
+        firi_gate            58
+
+properties:
+  compatible:
+    const: fsl,imx31-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for DVFS when a frequency change is requested, request 2 is
+      to generate interrupt for DPTC when a voltage change is requested.
+    items:
+      - description: CCM DVFS interrupt request 1
+      - description: CCM DPTC interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx31-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>, <53>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
new file mode 100644
index 0000000000..c063369de3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX35 Clock Controller
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. The following is a full list of i.MX35
+  clocks and IDs.
+
+        Clock			ID
+        ---------------------------
+        ckih			0
+        mpll			1
+        ppll			2
+        mpll_075		3
+        arm			4
+        hsp			5
+        hsp_div			6
+        hsp_sel			7
+        ahb			8
+        ipg			9
+        arm_per_div		10
+        ahb_per_div		11
+        ipg_per			12
+        uart_sel		13
+        uart_div		14
+        esdhc_sel		15
+        esdhc1_div		16
+        esdhc2_div		17
+        esdhc3_div		18
+        spdif_sel		19
+        spdif_div_pre		20
+        spdif_div_post		21
+        ssi_sel			22
+        ssi1_div_pre		23
+        ssi1_div_post		24
+        ssi2_div_pre		25
+        ssi2_div_post		26
+        usb_sel			27
+        usb_div			28
+        nfc_div			29
+        asrc_gate		30
+        pata_gate		31
+        audmux_gate		32
+        can1_gate		33
+        can2_gate		34
+        cspi1_gate		35
+        cspi2_gate		36
+        ect_gate		37
+        edio_gate		38
+        emi_gate		39
+        epit1_gate		40
+        epit2_gate		41
+        esai_gate		42
+        esdhc1_gate		43
+        esdhc2_gate		44
+        esdhc3_gate		45
+        fec_gate		46
+        gpio1_gate		47
+        gpio2_gate		48
+        gpio3_gate		49
+        gpt_gate		50
+        i2c1_gate		51
+        i2c2_gate		52
+        i2c3_gate		53
+        iomuxc_gate		54
+        ipu_gate		55
+        kpp_gate		56
+        mlb_gate		57
+        mshc_gate		58
+        owire_gate		59
+        pwm_gate		60
+        rngc_gate		61
+        rtc_gate		62
+        rtic_gate		63
+        scc_gate		64
+        sdma_gate		65
+        spba_gate		66
+        spdif_gate		67
+        ssi1_gate		68
+        ssi2_gate		69
+        uart1_gate		70
+        uart2_gate		71
+        uart3_gate		72
+        usbotg_gate		73
+        wdog_gate		74
+        max_gate		75
+        admux_gate		76
+        csi_gate		77
+        csi_div			78
+        csi_sel			79
+        iim_gate		80
+        gpu2d_gate		81
+        ckli_gate		82
+
+properties:
+  compatible:
+    const: fsl,imx35-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@53f80000 {
+        compatible = "fsl,imx35-ccm";
+        reg = <0x53f80000 0x4000>;
+        interrupts = <31>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
new file mode 100644
index 0000000000..423c0142c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX5 Clock Controller
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+  for the full list of i.MX5 clock IDs.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-ccm
+      - fsl,imx51-ccm
+      - fsl,imx50-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@53fd4000{
+        compatible = "fsl,imx53-ccm";
+        reg = <0x53fd4000 0x4000>;
+        interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
new file mode 100644
index 0000000000..bae4fcb3aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 Quad Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6q-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 24m osc
+      - description: 32k osc
+      - description: ckih1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: osc
+      - const: ckil
+      - const: ckih1
+      - const: anaclk1
+      - const: anaclk2
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Use this property if the SoC should be powered off by external power
+      management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+      Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+      be using "syscon-poweroff" driver instead.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6q-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
new file mode 100644
index 0000000000..c85ff6ea3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 SoloLite Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sl-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sl-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
new file mode 100644
index 0000000000..6b549ed149
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 SLL Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sll-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sll-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
new file mode 100644
index 0000000000..55dcad18b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 SoloX Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6sx-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+      - description: anaclk1 clock input
+      - description: anaclk2 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+      - const: anaclk1
+      - const: anaclk2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6sx-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
new file mode 100644
index 0000000000..be54d4df5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 UltraLite Clock Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: CCM provides 2 interrupt requests, request 1 is to generate
+      interrupt for frequency or mux change, request 2 is to generate
+      interrupt for oscillator read or PLL lock.
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ipp_di0 clock input
+      - description: ipp_di1 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+      - const: ipp_di0
+      - const: ipp_di1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@20c4000 {
+        compatible = "fsl,imx6ul-ccm";
+        reg = <0x020c4000 0x4000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+        clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
new file mode 100644
index 0000000000..e7d8427e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 Dual Clock Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h
+  for the full list of i.MX7 Dual clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imx7d-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: CCM interrupt request 1
+      - description: CCM interrupt request 2
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@30380000 {
+        compatible = "fsl,imx7d-ccm";
+        reg = <0x30380000 0x10000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc>;
+        clock-names = "ckil", "osc";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
new file mode 100644
index 0000000000..76842038f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Peripheral Clock Control (PCC) modules Clock Controller
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  i.MX7ULP Clock functions are under joint control of the System
+  Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+  modules, and Core Mode Controller (CMC)1 blocks
+
+  The clocking scheme provides clear separation between M4 domain
+  and A7 domain. Except for a few clock sources shared between two
+  domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+  and and the Fast IRC clock (FIRCLK), clock sources and clock
+  management are separated and contained within each domain.
+
+  M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+  A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+  Note: this binding doc is only for A7 clock domain.
+
+  The Peripheral Clock Control (PCC) is responsible for clock selection,
+  optional division and clock gating mode for peripherals in their
+  respected power domain.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+  i.MX7ULP clock IDs of each module.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7ulp-pcc2
+      - fsl,imx7ulp-pcc3
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: nic1 bus clock
+      - description: nic1 clock
+      - description: ddr clock
+      - description: apll pfd2
+      - description: apll pfd1
+      - description: apll pfd0
+      - description: usb pll
+      - description: system osc bus clock
+      - description: fast internal reference clock bus
+      - description: rtc osc
+      - description: system pll bus clock
+
+  clock-names:
+    items:
+      - const: nic1_bus_clk
+      - const: nic1_clk
+      - const: ddr_clk
+      - const: apll_pfd2
+      - const: apll_pfd1
+      - const: apll_pfd0
+      - const: upll
+      - const: sosc_bus_clk
+      - const: firc_bus_clk
+      - const: rosc
+      - const: spll_bus_clk
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@403f0000 {
+        compatible = "fsl,imx7ulp-pcc2";
+        reg = <0x403f0000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
+                 <&scg1 IMX7ULP_CLK_DDR_DIV>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD2>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD1>,
+                 <&scg1 IMX7ULP_CLK_APLL_PFD0>,
+                 <&scg1 IMX7ULP_CLK_UPLL>,
+                 <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>,
+                 <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>,
+                 <&scg1 IMX7ULP_CLK_ROSC>,
+                 <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>;
+         clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk",
+                       "apll_pfd2", "apll_pfd1", "apll_pfd0",
+                       "upll", "sosc_bus_clk", "firc_bus_clk",
+                       "rosc", "spll_bus_clk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
new file mode 100644
index 0000000000..5e25bc6d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP System Clock Generation (SCG) modules Clock Controller
+
+maintainers:
+  - A.s. Dong <aisheng.dong@nxp.com>
+
+description: |
+  i.MX7ULP Clock functions are under joint control of the System
+  Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
+  modules, and Core Mode Controller (CMC)1 blocks
+
+  The clocking scheme provides clear separation between M4 domain
+  and A7 domain. Except for a few clock sources shared between two
+  domains, such as the System Oscillator clock, the Slow IRC (SIRC),
+  and and the Fast IRC clock (FIRCLK), clock sources and clock
+  management are separated and contained within each domain.
+
+  M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
+  A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.
+
+  Note: this binding doc is only for A7 clock domain.
+
+  The System Clock Generation (SCG) is responsible for clock generation
+  and distribution across this device. Functions performed by the SCG
+  include: clock reference selection, generation of clock used to derive
+  processor, system, peripheral bus and external memory interface clocks,
+  source selection for peripheral clocks and control of power saving
+  clock gating mode.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/imx7ulp-clock.h for the full list of
+  i.MX7ULP clock IDs of each module.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-scg1
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: rtc osc
+      - description: system osc
+      - description: slow internal reference clock
+      - description: fast internal reference clock
+      - description: usb PLL
+
+  clock-names:
+    items:
+      - const: rosc
+      - const: sosc
+      - const: sirc
+      - const: firc
+      - const: upll
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    clock-controller@403e0000 {
+        compatible = "fsl,imx7ulp-scg1";
+        reg = <0x403e0000 0x10000>;
+        clocks = <&rosc>, <&sosc>, <&sirc>,
+                 <&firc>, <&upll>;
+        clock-names = "rosc", "sosc", "sirc",
+                      "firc", "upll";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
new file mode 100644
index 0000000000..80539f88bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Clock Control Module
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Mini/Nano/Plus/Quad clock control module is an integrated clock
+  controller, which generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-ccm
+      - fsl,imx8mn-ccm
+      - fsl,imx8mp-ccm
+      - fsl,imx8mq-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    minItems: 6
+    maxItems: 7
+
+  clock-names:
+    minItems: 6
+    maxItems: 7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8m-clock.h
+      for the full list of i.MX8M clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-ccm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 25m osc
+            - description: 27m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+        clock-names:
+          items:
+            - const: ckil
+            - const: osc_25m
+            - const: osc_27m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+    else:
+      properties:
+        clocks:
+          items:
+            - description: 32k osc
+            - description: 24m osc
+            - description: ext1 clock input
+            - description: ext2 clock input
+            - description: ext3 clock input
+            - description: ext4 clock input
+
+        clock-names:
+          items:
+            - const: osc_32k
+            - const: osc_24m
+            - const: clk_ext1
+            - const: clk_ext2
+            - const: clk_ext3
+            - const: clk_ext4
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@30380000 {
+        compatible = "fsl,imx8mm-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+  - |
+    clock-controller@30380000 {
+        compatible = "fsl,imx8mq-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc_25m>, <&osc_27m>, <&clk_ext1>,
+                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+        clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1",
+                      "clk_ext2", "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
new file mode 100644
index 0000000000..0a6dc1a6e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP AudioMIX Block Control
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  NXP i.MX8M Plus AudioMIX is dedicated clock muxing and gating IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-audio-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: sai1
+      - const: sai2
+      - const: sai3
+      - const: sai5
+      - const: sai6
+      - const: sai7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
+      for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    clock-controller@30e20000 {
+        compatible = "fsl,imx8mp-audio-blk-ctrl";
+        reg = <0x30e20000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+                 <&clk IMX8MP_CLK_SAI1>,
+                 <&clk IMX8MP_CLK_SAI2>,
+                 <&clk IMX8MP_CLK_SAI3>,
+                 <&clk IMX8MP_CLK_SAI5>,
+                 <&clk IMX8MP_CLK_SAI6>,
+                 <&clk IMX8MP_CLK_SAI7>;
+        clock-names = "ahb",
+                      "sai1", "sai2", "sai3",
+                      "sai5", "sai6", "sai7";
+        power-domains = <&pgc_audio>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
new file mode 100644
index 0000000000..b207f95361
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock
+
+maintainers:
+  - Aisheng Dong <aisheng.dong@nxp.com>
+
+description: |
+  The Low-Power Clock Gate (LPCG) modules contain a local programming
+  model to control the clock gates for the peripherals. An LPCG module
+  is used to locally gate the clocks for the associated peripheral.
+
+  This level of clock gating is provided after the clocks are generated
+  by the SCU resources and clock controls. Thus even if the clock is
+  enabled by these control bits, it might still not be running based
+  on the base resource.
+
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from:
+  include/dt-bindings/clock/imx8-lpcg.h
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx8qxp-lpcg
+      - items:
+          - enum:
+              - fsl,imx8qm-lpcg
+          - const: fsl,imx8qxp-lpcg
+      - enum:
+          - fsl,imx8qxp-lpcg-adma
+          - fsl,imx8qxp-lpcg-conn
+          - fsl,imx8qxp-lpcg-dc
+          - fsl,imx8qxp-lpcg-dsp
+          - fsl,imx8qxp-lpcg-gpu
+          - fsl,imx8qxp-lpcg-hsio
+          - fsl,imx8qxp-lpcg-img
+          - fsl,imx8qxp-lpcg-lsio
+          - fsl,imx8qxp-lpcg-vpu
+        deprecated: true
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: |
+      Input parent clocks phandle array for each clock
+    minItems: 1
+    maxItems: 8
+
+  clock-indices:
+    description: |
+      An integer array indicating the bit offset for each clock.
+      Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the
+      supported LPCG clock indices.
+    minItems: 1
+    maxItems: 8
+
+  clock-output-names:
+    description: |
+      Shall be the corresponding names of the outputs.
+      NOTE this property must be specified in the same order
+      as the clock-indices property.
+    minItems: 1
+    maxItems: 8
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sdhc0_lpcg: clock-controller@5b200000 {
+        compatible = "fsl,imx8qxp-lpcg";
+        reg = <0x5b200000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>,
+                 <&conn_ipg_clk>,
+                 <&conn_axi_clk>;
+        clock-indices = <IMX_LPCG_CLK_0>,
+                        <IMX_LPCG_CLK_4>,
+                        <IMX_LPCG_CLK_5>;
+        clock-output-names = "sdhc0_lpcg_per_clk",
+                             "sdhc0_lpcg_ipg_clk",
+                             "sdhc0_lpcg_ahb_clk";
+        power-domains = <&pd IMX_SC_R_SDHC_0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
new file mode 100644
index 0000000000..68a60cdc19
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The CGC modules generate
+  and distribute clocks on the device.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-cgc1
+      - fsl,imx8ulp-cgc2
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Generation & Control Module node:
+  - |
+    clock-controller@292c0000 {
+        compatible = "fsl,imx8ulp-cgc1";
+        reg = <0x292c0000 0x10000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
new file mode 100644
index 0000000000..d0b0792fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The PCC modules control
+  software reset, clock selection, optional division and clock gating mode
+  for peripherals.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-pcc3
+      - fsl,imx8ulp-pcc4
+      - fsl,imx8ulp-pcc5
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # Peripheral Clock Control Module node:
+  - |
+    clock-controller@292d0000 {
+        compatible = "fsl,imx8ulp-pcc3";
+        reg = <0x292d0000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
new file mode 100644
index 0000000000..ccb53c6b96
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 0000000000..777af4aad4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT Clock Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
new file mode 100644
index 0000000000..509df06b9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs CGU
+
+description: |
+  The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
+  typically includes a variety of PLLs, multiplexers, dividers & gates in order
+  to provide many different clock signals derived from only 2 external source
+  clocks.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
+          - ingenic,jz4760-cgu
+          - ingenic,jz4760b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^clock-controller@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  ranges: true
+
+  compatible:
+    items:
+      - enum:
+          - ingenic,jz4740-cgu
+          - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
+          - ingenic,jz4760-cgu
+          - ingenic,jz4760b-cgu
+          - ingenic,jz4770-cgu
+          - ingenic,jz4780-cgu
+          - ingenic,x1000-cgu
+          - ingenic,x1830-cgu
+      - const: simple-mfd
+    minItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External oscillator clock
+      - description: Internal 32 kHz RTC clock
+
+  clock-names:
+    items:
+      - const: ext
+      - enum:
+          - rtc
+          - osc32k # Different name, same clock
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 64
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^usb-phy@[a-f0-9]+$":
+    $ref: /schemas/phy/ingenic,phy-usb.yaml#
+  "^mac-phy-ctrl@[a-f0-9]+$":
+    $ref: /schemas/net/ingenic,mac.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    cgu: clock-controller@10000000 {
+      compatible = "ingenic,jz4770-cgu", "simple-mfd";
+      reg = <0x10000000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10000000 0x100>;
+
+      clocks = <&ext>, <&osc32k>;
+      clock-names = "ext", "osc32k";
+
+      #clock-cells = <1>;
+
+      otg_phy: usb-phy@3c {
+        compatible = "ingenic,jz4770-phy";
+        reg = <0x3c 0x10>;
+
+        clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+        vcc-supply = <&ldo5>;
+
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex.yaml b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
new file mode 100644
index 0000000000..3745ba8dbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel Agilex Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: intel,agilex-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkmgr: clock-controller@ffd10000 {
+      compatible = "intel,agilex-clkmgr";
+      reg = <0xffd10000 0x1000>;
+      clocks = <&osc1>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml b/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml
new file mode 100644
index 0000000000..d120b0da7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,agilex5-clkmgr.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,agilex5-clkmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Agilex5 clock manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel Agilex5 Clock Manager is an integrated clock controller, which
+  generates and supplies clock to all the modules.
+
+properties:
+  compatible:
+    const: intel,agilex5-clkmgr
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clkmgr: clock-controller@10d10000 {
+      compatible = "intel,agilex5-clkmgr";
+      reg = <0x10d10000 0x1000>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
new file mode 100644
index 0000000000..76609a3904
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC's Clock Controller(CGU)
+
+maintainers:
+  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+  Lightning Mountain(LGM) SoC's Clock Generation Unit(CGU) driver provides
+  all means to access the CGU hardware module in order to generate a series
+  of clocks for the whole system and individual peripherals.
+
+  Please refer to include/dt-bindings/clock/intel,lgm-clk.h header file, it
+  defines all available clocks as macros. These macros can be used in device
+  tree sources.
+
+properties:
+  compatible:
+    const: intel,cgu-lgm
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cgu: clock-controller@e0200000 {
+        compatible = "intel,cgu-lgm";
+        reg = <0xe0200000 0x33c>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
new file mode 100644
index 0000000000..e000116a51
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA eASIC N5X platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+description:
+  The Intel eASIC N5X Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: intel,easic-n5x-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    clkmgr: clock-controller@ffd10000 {
+      compatible = "intel,easic-n5x-clkmgr";
+      reg = <0xffd10000 0x1000>;
+      clocks = <&osc1>;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
new file mode 100644
index 0000000000..b4a8be2134
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt
new file mode 100644
index 0000000000..c5aa187026
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt
@@ -0,0 +1,29 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for Keystone gate control driver which uses PSC controller IP.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,keystone,psc-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : parent clock phandle
+- reg :	psc control and domain address address space
+- reg-names : psc control and domain registers
+- domain-id : psc domain id needed to check the transition state register
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+			default output clock name
+Example:
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
new file mode 100644
index 0000000000..9a3fbc6656
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multiplier registers
+- reg-names : control, multiplier and post-divider. The multiplier and
+		post-divider registers are applicable only for main pll clock
+- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
+		for postdiv
+
+Example:
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
new file mode 100644
index 0000000000..01561a0f35
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls1x-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Clock Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls1b-clk
+      - loongson,ls1c-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clkc: clock-controller@1fe78030 {
+        compatible = "loongson,ls1b-clk";
+        reg = <0x1fe78030 0x8>;
+
+        clocks = <&xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
new file mode 100644
index 0000000000..63a5901598
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Clock Control Module
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 100m ref
+
+  clock-names:
+    items:
+      - const: ref_100m
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h
+      for the full list of Loongson-2 SoC clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ref_100m: clock-ref-100m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <100000000>;
+        clock-output-names = "ref_100m";
+    };
+
+    clk: clock-controller@1fe00480 {
+        compatible = "loongson,ls2k-clk";
+        reg = <0x1fe00480 0x58>;
+        #clock-cells = <1>;
+        clocks = <&ref_100m>;
+        clock-names = "ref_100m";
+    };
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
new file mode 100644
index 0000000000..8cf8f0ecdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt
@@ -0,0 +1,77 @@
+* NXP LPC1850 Clock Control Unit (CCU)
+
+Each CGU base clock has several clock branches which can be turned on
+or off independently by the Clock Control Units CCU1 or CCU2. The
+branch clocks are distributed between CCU1 and CCU2.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-ccu"
+- reg:
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells:
+	Shall have value <1>.  The permitted clock-specifier values
+	are the branch clock names defined in table below.
+- clocks:
+	Shall contain a list of phandles for the base clocks routed
+	from the CGU to the specific CCU. See mapping of base clocks
+	and CCU in table below.
+- clock-names:
+	Shall contain a list of names for the base clock routed
+	from the CGU to the specific CCU. Valid CCU clock names:
+	"base_usb0_clk",  "base_periph_clk", "base_usb1_clk",
+	"base_cpu_clk",   "base_spifi_clk",  "base_spi_clk",
+	"base_apb1_clk",  "base_apb3_clk",   "base_adchs_clk",
+	"base_sdio_clk",  "base_ssp0_clk",   "base_ssp1_clk",
+	"base_uart0_clk", "base_uart1_clk",  "base_uart2_clk",
+	"base_uart3_clk", "base_audio_clk"
+
+Which branch clocks that are available on the CCU depends on the
+specific LPC part. Check the user manual for your specific part.
+
+A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h.
+
+Example board file:
+
+soc {
+	ccu1: clock-controller@40051000 {
+		compatible = "nxp,lpc1850-ccu";
+		reg = <0x40051000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&cgu BASE_APB3_CLK>,   <&cgu BASE_APB1_CLK>,
+			 <&cgu BASE_SPIFI_CLK>,  <&cgu BASE_CPU_CLK>,
+			 <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>,
+			 <&cgu BASE_USB1_CLK>,   <&cgu BASE_SPI_CLK>;
+		clock-names = "base_apb3_clk",   "base_apb1_clk",
+			      "base_spifi_clk",  "base_cpu_clk",
+			      "base_periph_clk", "base_usb0_clk",
+			      "base_usb1_clk",   "base_spi_clk";
+	};
+
+	ccu2: clock-controller@40052000 {
+		compatible = "nxp,lpc1850-ccu";
+		reg = <0x40052000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>,
+			 <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>,
+			 <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>,
+			 <&cgu BASE_SSP0_CLK>,  <&cgu BASE_SDIO_CLK>;
+		clock-names = "base_audio_clk", "base_uart3_clk",
+			      "base_uart2_clk", "base_uart1_clk",
+			      "base_uart0_clk", "base_ssp1_clk",
+			      "base_ssp0_clk",  "base_sdio_clk";
+	};
+
+	/* A user of CCU branch clocks */
+	uart1: serial@40082000 {
+		...
+		clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
new file mode 100644
index 0000000000..2cc32a9a94
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt
@@ -0,0 +1,131 @@
+* NXP LPC1850 Clock Generation Unit (CGU)
+
+The CGU generates multiple independent clocks for the core and the
+peripheral blocks of the LPC18xx. Each independent clock is called
+a base clock and itself is one of the inputs to the two Clock
+Control Units (CCUs) which control the branch clocks to the
+individual peripherals.
+
+The CGU selects the inputs to the clock generators from multiple
+clock sources, controls the clock generation, and routes the outputs
+of the clock generators through the clock source bus to the output
+stages. Each output stage provides an independent clock source and
+corresponds to one of the base clocks for the LPC18xx.
+
+ - Above text taken from NXP LPC1850 User Manual.
+
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-cgu"
+- reg:
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells:
+	Shall have value <1>.  The permitted clock-specifier values
+	are the base clock numbers defined below.
+- clocks:
+	Shall contain a list of phandles for the external input
+	sources to the CGU. The list shall be in the following
+	order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin.
+- clock-indices:
+	Shall be an ordered list of numbers defining the base clock
+	number provided by the CGU.
+- clock-output-names:
+	Shall be an ordered list of strings defining the names of
+	the clocks provided by the CGU.
+
+Which base clocks that are available on the CGU depends on the
+specific LPC part. Base clocks are numbered from 0 to 27.
+
+Number:		Name:			Description:
+ 0		BASE_SAFE_CLK		Base safe clock (always on) for WWDT
+ 1		BASE_USB0_CLK		Base clock for USB0
+ 2		BASE_PERIPH_CLK		Base clock for Cortex-M0SUB subsystem,
+					SPI, and SGPIO
+ 3		BASE_USB1_CLK		Base clock for USB1
+ 4		BASE_CPU_CLK		System base clock for ARM Cortex-M core
+					and APB peripheral blocks #0 and #2
+ 5		BASE_SPIFI_CLK		Base clock for SPIFI
+ 6		BASE_SPI_CLK		Base clock for SPI
+ 7		BASE_PHY_RX_CLK		Base clock for Ethernet PHY Receive clock
+ 8		BASE_PHY_TX_CLK		Base clock for Ethernet PHY Transmit clock
+ 9		BASE_APB1_CLK		Base clock for APB peripheral block # 1
+10		BASE_APB3_CLK		Base clock for APB peripheral block # 3
+11		BASE_LCD_CLK		Base clock for LCD
+12		BASE_ADCHS_CLK		Base clock for ADCHS
+13		BASE_SDIO_CLK		Base clock for SD/MMC
+14		BASE_SSP0_CLK		Base clock for SSP0
+15		BASE_SSP1_CLK		Base clock for SSP1
+16		BASE_UART0_CLK		Base clock for UART0
+17		BASE_UART1_CLK		Base clock for UART1
+18		BASE_UART2_CLK		Base clock for UART2
+19		BASE_UART3_CLK		Base clock for UART3
+20		BASE_OUT_CLK		Base clock for CLKOUT pin
+24-21		-			Reserved
+25		BASE_AUDIO_CLK		Base clock for audio system (I2S)
+26 		BASE_CGU_OUT0_CLK	Base clock for CGU_OUT0 clock output
+27 		BASE_CGU_OUT1_CLK	Base clock for CGU_OUT1 clock output
+
+BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx.
+BASE_ADCHS_CLK is only available on LPC4370.
+
+
+Example board file:
+
+/ {
+	clocks {
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		xtal32: xtal32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		enet_rx_clk: enet_rx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_rx_clk";
+		};
+
+		enet_tx_clk: enet_tx_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "enet_tx_clk";
+		};
+
+		gp_clkin: gp_clkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "gp_clkin";
+		};
+	};
+
+	soc {
+		cgu: clock-controller@40050000 {
+			compatible = "nxp,lpc1850-cgu";
+			reg = <0x40050000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>;
+		};
+
+		/* A CGU and CCU clock consumer */
+		lcdc: lcdc@40008000 {
+			...
+			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
+			clock-names = "clcdclk", "apb_pclk";
+			...
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
new file mode 100644
index 0000000000..b6b2547a3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
@@ -0,0 +1,52 @@
+* NXP LPC1850 CREG clocks
+
+The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
+control registers for two low speed clocks. One of the clocks is a
+32 kHz oscillator driver with power up/down and clock gating. Next
+is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
+
+These clocks are used by the RTC and the Event Router peripherals.
+The 32 kHz can also be routed to other peripherals to enable low
+power modes.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-creg-clk"
+- #clock-cells:
+	Shall have value <1>.
+- clocks:
+	Shall contain a phandle to the fixed 32 kHz crystal.
+
+The creg-clk node must be a child of the creg syscon node.
+
+The following clocks are available from the clock node.
+
+Clock ID	Name
+   0		 1 kHz clock
+   1		32 kHz Oscillator
+
+Example:
+soc {
+	creg: syscon@40043000 {
+		compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+		reg = <0x40043000 0x1000>;
+
+		creg_clk: clock-controller {
+			compatible = "nxp,lpc1850-creg-clk";
+			clocks = <&xtal32>;
+			#clock-cells = <1>;
+		};
+
+		...
+	};
+
+	rtc: rtc@40046000 {
+		...
+		clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+		clock-names = "rtc", "reg";
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
new file mode 100644
index 0000000000..3ce97cfe99
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
@@ -0,0 +1,29 @@
+AXM5516 clock driver bindings
+-----------------------------
+
+Required properties :
+- compatible : shall contain "lsi,axm5516-clks"
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+
+The consumer specifies the desired clock by having the clock ID in its "clocks"
+phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
+supported clock IDs.
+
+Example:
+
+	clks: clock-controller@2010020000 {
+		compatible = "lsi,axm5516-clks";
+		#clock-cells = <1>;
+		reg = <0x20 0x10020000 0 0x20000>;
+	};
+
+	serial0: uart@2010080000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x20 0x10080000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks AXXIA_CLK_PER>;
+		clock-names = "apb_pclk";
+	};
+																																};
+
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 0000000000..175f5c8f2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/Documentation/devicetree/bindings/clock/marvell,berlin.txt
new file mode 100644
index 0000000000..c611c495f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,berlin.txt
@@ -0,0 +1,31 @@
+Device Tree Clock bindings for Marvell Berlin
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Clock related registers are spread among the chip control registers. Berlin
+clock node should be a sub-node of the chip controller node. Marvell Berlin2
+(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some
+minor differences in features and register layout.
+
+Required properties:
+- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk"
+- #clock-cells: must be 1
+- clocks: must be the input parent clock phandle
+- clock-names: name of the input parent clock
+	Allowed clock-names for the reference clocks are
+	"refclk" for the SoCs oscillator input on all SoCs,
+	and SoC-specific input clocks for
+	BG2/BG2CD: "video_ext0" for the external video clock input
+
+
+Example:
+
+chip_clk: clock {
+	compatible = "marvell,berlin2q-clk";
+
+	#clock-cells = <1>;
+	clocks = <&refclk>;
+	clock-names = "refclk";
+};
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml
new file mode 100644
index 0000000000..dffa73402d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-audio-clock.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-audio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 Audio Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The audio clock controller generates and supplies the clocks to the audio
+  codec.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in
+  <dt-bindings/clock/marvell,mmp2-audio.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-audio-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio subsystem clock
+      - description: The crystal oscillator clock
+      - description: First I2S clock
+      - description: Second I2S clock
+
+  clock-names:
+    items:
+      - const: audio
+      - const: vctcxo
+      - const: i2s0
+      - const: i2s1
+
+  '#clock-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2-audio.h>
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/power/marvell,mmp2.h>
+
+    clock-controller@d42a0c30 {
+      compatible = "marvell,mmp2-audio-clock";
+      reg = <0xd42a0c30 0x10>;
+      clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+      clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+               <&soc_clocks MMP2_CLK_VCTCXO>,
+               <&soc_clocks MMP2_CLK_I2S0>,
+               <&soc_clocks MMP2_CLK_I2S1>;
+      power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
new file mode 100644
index 0000000000..d68f0d196e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2-clock.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,mmp2-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 and MMP3 Clock Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The clock subsystem on MMP2 or MMP3 generates and supplies clock to various
+  controllers within the SoC.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,mmp2-clock # controller compatible with MMP2 SoC
+      - marvell,mmp3-clock # controller compatible with MMP3 SoC
+
+  reg:
+    items:
+      - description: MPMU register region
+      - description: APMU register region
+      - description: APBC register region
+
+  reg-names:
+    items:
+      - const: mpmu
+      - const: apmu
+      - const: apbc
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@d4050000 {
+      compatible = "marvell,mmp2-clock";
+      reg = <0xd4050000 0x1000>,
+            <0xd4282800 0x400>,
+            <0xd4015000 0x1000>;
+      reg-names = "mpmu", "apmu", "apbc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa168.txt b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
new file mode 100644
index 0000000000..c62eb1d173
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa168.txt
@@ -0,0 +1,21 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 3 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
new file mode 100644
index 0000000000..809c5a2d8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt
@@ -0,0 +1,21 @@
+* Marvell PXA1928 Clock Controllers
+
+The PXA1928 clock subsystem generates and supplies clock to various
+controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller
+blocks called APMU, MPMU, and APBC roughly corresponding to internal buses.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa1928-apmu" - APMU controller compatible
+  - "marvell,pxa1928-mpmu" - MPMU controller compatible
+  - "marvell,pxa1928-apbc" - APBC controller compatible
+- reg: physical base address of the clock controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use the clock controller
+phandle and this identifier to specify the clock which they consume.
+
+All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>.
diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa910.txt b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
new file mode 100644
index 0000000000..d9f41f3c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa910.txt
@@ -0,0 +1,21 @@
+* Marvell PXA910 Clock Controller
+
+The PXA910 clock subsystem generates and supplies clock to various
+controllers within the PXA910 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 4 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
new file mode 100644
index 0000000000..c10849efb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -0,0 +1,114 @@
+Binding for Maxim MAX77686/MAX77802/MAX77620 32k clock generator block
+
+This is a part of device tree bindings of MAX77686/MAX77802/MAX77620
+multi-function device. More information can be found in MFD DT binding
+doc as follows:
+	bindings/mfd/max77686.txt for MAX77686 and
+	bindings/mfd/max77802.txt for MAX77802 and
+	bindings/mfd/max77620.txt for MAX77620.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77686.h.
+
+
+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77802.h.
+
+The MAX77686 contains one 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C. Clocks are defined as preprocessor macros in
+dt-bindings/clock/maxim,max77620.h.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+    - 0: 32khz_ap clock (max77686, max77802), 32khz_out0 (max77620)
+    - 1: 32khz_cp clock (max77686, max77802),
+    - 2: 32khz_pmic clock (max77686).
+
+Clocks are defined as preprocessor macros in above dt-binding header for
+respective chips.
+
+Example:
+
+1. With MAX77686:
+
+#include <dt-bindings/clock/maxim,max77686.h>
+/* ... */
+
+	Node of the MFD chip
+		max77686: max77686@9 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&wakeup_eint>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77686 MAX77686_CLK_PMIC>;
+		};
+
+2. With MAX77802:
+
+#include <dt-bindings/clock/maxim,max77802.h>
+/* ... */
+
+	Node of the MFD chip
+		max77802: max77802@9 {
+			compatible = "maxim,max77802";
+			interrupt-parent = <&wakeup_eint>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77802 MAX77802_CLK_32K_AP>;
+		};
+
+
+3. With MAX77620:
+
+#include <dt-bindings/clock/maxim,max77620.h>
+/* ... */
+
+	Node of the MFD chip
+		max77620: max77620@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			#clock-cells = <1>;
+			/* ... */
+		};
+
+	Clock consumer node
+
+		foo@0 {
+			compatible = "bar,foo";
+			/* ... */
+			clock-names = "my-clock";
+			clocks = <&max77620 MAX77620_CLK_32K_OUT0>;
+		};
diff --git a/Documentation/devicetree/bindings/clock/maxim,max9485.txt b/Documentation/devicetree/bindings/clock/maxim,max9485.txt
new file mode 100644
index 0000000000..b8f5c3bbf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max9485.txt
@@ -0,0 +1,59 @@
+Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
+
+This device exposes 4 clocks in total:
+
+- MAX9485_MCLKOUT: 	A gated, buffered output of the input clock of 27 MHz
+- MAX9485_CLKOUT:	A PLL that can be configured to 16 different discrete
+			frequencies
+- MAX9485_CLKOUT[1,2]:	Two gated outputs for MAX9485_CLKOUT
+
+MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+requests.
+
+Required properties:
+- compatible:	"maxim,max9485"
+- clocks:	Input clock, must provide 27.000 MHz
+- clock-names:	Must be set to "xclk"
+- #clock-cells: From common clock binding; shall be set to 1
+
+Optional properties:
+- reset-gpios:		GPIO descriptor connected to the #RESET input pin
+- vdd-supply:		A regulator node for Vdd
+- clock-output-names:	Name of output clocks, as defined in common clock
+			bindings
+
+If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
+and "clkout2".
+
+Clocks are defined as preprocessor macros in the dt-binding header.
+
+Example:
+
+	#include <dt-bindings/clock/maxim,max9485.h>
+
+	xo-27mhz: xo-27mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	&i2c0 {
+		max9485: audio-clock@63 {
+			reg = <0x63>;
+			compatible = "maxim,max9485";
+			clock-names = "xclk";
+			clocks = <&xo-27mhz>;
+			reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+			vdd-supply = <&3v3-reg>;
+			#clock-cells = <1>;
+		};
+	};
+
+	// Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "foo-input-clk";
+		clocks = <&max9485 MAX9485_CLKOUT1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 0000000000..372c1d744b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek apmixedsys controller provides PLLs to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-apmixedsys
+          - mediatek,mt7622-apmixedsys
+          - mediatek,mt7981-apmixedsys
+          - mediatek,mt7986-apmixedsys
+          - mediatek,mt8135-apmixedsys
+          - mediatek,mt8173-apmixedsys
+          - mediatek,mt8516-apmixedsys
+      - items:
+          - const: mediatek,mt7623-apmixedsys
+          - const: mediatek,mt2701-apmixedsys
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-apmixedsys
+              - mediatek,mt2712-apmixedsys
+              - mediatek,mt6765-apmixedsys
+              - mediatek,mt6779-apmixedsys
+              - mediatek,mt6795-apmixedsys
+              - mediatek,mt7629-apmixedsys
+              - mediatek,mt8167-apmixedsys
+              - mediatek,mt8183-apmixedsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys: clock-controller@10209000 {
+        compatible = "mediatek,mt8173-apmixedsys";
+        reg = <0x10209000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
new file mode 100644
index 0000000000..04469eabc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
new file mode 100644
index 0000000000..378b761237
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system
+  configuration like reset and bus protection on MT6795.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt6795-apmixedsys
+          - mediatek,mt6795-infracfg
+          - mediatek,mt6795-pericfg
+          - mediatek,mt6795-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        topckgen: clock-controller@10000000 {
+            compatible = "mediatek,mt6795-topckgen", "syscon";
+            reg = <0 0x10000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
new file mode 100644
index 0000000000..b42f0f5c11
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT7621 Clock
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The MT7621 has a PLL controller from where the cpu clock is provided
+  as well as derived clocks for the bus and the peripherals. It also
+  can gate SoC device clocks.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify the clock which they consume.
+
+  All these identifiers could be found in:
+  [1]: <include/dt-bindings/clock/mt7621-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7621-sysc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
+  ralink,memctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of syscon used to control memory registers
+
+  clock-output-names:
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - ralink,memctl
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+
+    sysc: sysc@0 {
+      compatible = "mediatek,mt7621-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      ralink,memctl = <&memc>;
+      clock-output-names = "xtal", "cpu", "bus",
+                           "50m", "125m", "150m",
+                           "250m", "270m";
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
new file mode 100644
index 0000000000..d00327d12e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-fhctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek frequency hopping and spread spectrum clocking control
+
+maintainers:
+  - Edward-JW Yang <edward-jw.yang@mediatek.com>
+
+description: |
+  Frequency hopping control (FHCTL) is a piece of hardware that control
+  some PLLs to adopt "hopping" mechanism to adjust their frequency.
+  Spread spectrum clocking (SSC) is another function provided by this hardware.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-fhctl
+      - mediatek,mt8173-fhctl
+      - mediatek,mt8186-fhctl
+      - mediatek,mt8192-fhctl
+      - mediatek,mt8195-fhctl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Phandles of the PLL with FHCTL hardware capability.
+    minItems: 1
+    maxItems: 30
+
+  mediatek,hopping-ssc-percent:
+    description: The percentage of spread spectrum clocking for one PLL.
+    minItems: 1
+    maxItems: 30
+    items:
+      default: 0
+      minimum: 0
+      maximum: 8
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    fhctl: fhctl@1000ce00 {
+        compatible = "mediatek,mt8186-fhctl";
+        reg = <0x1000ce00 0x200>;
+        clocks = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+        mediatek,hopping-ssc-percent = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
new file mode 100644
index 0000000000..d7214d97b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-adsp-audio26m
+      - mediatek,mt8188-camsys
+      - mediatek,mt8188-camsys-rawa
+      - mediatek,mt8188-camsys-rawb
+      - mediatek,mt8188-camsys-yuva
+      - mediatek,mt8188-camsys-yuvb
+      - mediatek,mt8188-ccusys
+      - mediatek,mt8188-imgsys
+      - mediatek,mt8188-imgsys-wpe1
+      - mediatek,mt8188-imgsys-wpe2
+      - mediatek,mt8188-imgsys-wpe3
+      - mediatek,mt8188-imgsys1-dip-nr
+      - mediatek,mt8188-imgsys1-dip-top
+      - mediatek,mt8188-imp-iic-wrap-c
+      - mediatek,mt8188-imp-iic-wrap-en
+      - mediatek,mt8188-imp-iic-wrap-w
+      - mediatek,mt8188-ipesys
+      - mediatek,mt8188-mfgcfg
+      - mediatek,mt8188-vdecsys
+      - mediatek,mt8188-vdecsys-soc
+      - mediatek,mt8188-vencsys
+      - mediatek,mt8188-vppsys0
+      - mediatek,mt8188-vppsys1
+      - mediatek,mt8188-wpesys
+      - mediatek,mt8188-wpesys-vpp0
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11283000 {
+        compatible = "mediatek,mt8188-imp-iic-wrap-c";
+        reg = <0x11283000 0x1000>;
+        #clock-cells = <1>;
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
new file mode 100644
index 0000000000..4cf8d3af98
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8188-apmixedsys
+          - mediatek,mt8188-infracfg-ao
+          - mediatek,mt8188-pericfg-ao
+          - mediatek,mt8188-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000000 {
+        compatible = "mediatek,mt8188-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
new file mode 100644
index 0000000000..b327ecb4e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
new file mode 100644
index 0000000000..643f84660c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
new file mode 100644
index 0000000000..ba7ffc5b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mtmips-sysc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mtmips-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTMIPS SoCs System Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MIPS and Ralink SoCs provides a system controller to allow
+  to access to system control registers. These registers include clock
+  and reset related ones so this node is both clock and reset provider
+  for the rest of the world.
+
+  These SoCs have an XTAL from where the cpu clock is
+  provided as well as derived clocks for the bus and the peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ralink,mt7620-sysc
+          - ralink,mt7628-sysc
+          - ralink,mt7688-sysc
+          - ralink,rt2880-sysc
+          - ralink,rt3050-sysc
+          - ralink,rt3052-sysc
+          - ralink,rt3352-sysc
+          - ralink,rt3883-sysc
+          - ralink,rt5350-sysc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The first cell indicates the clock number.
+    const: 1
+
+  '#reset-cells':
+    description:
+      The first cell indicates the reset bit within the register.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@0 {
+      compatible = "ralink,rt5350-sysc", "syscon";
+      reg = <0x0 0x100>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 0000000000..6d087ded74
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek topckgen controller provides various clocks to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-topckgen
+          - mediatek,mt7622-topckgen
+          - mediatek,mt8135-topckgen
+          - mediatek,mt8173-topckgen
+          - mediatek,mt8516-topckgen
+      - items:
+          - const: mediatek,mt7623-topckgen
+          - const: mediatek,mt2701-topckgen
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-topckgen
+              - mediatek,mt2712-topckgen
+              - mediatek,mt6765-topckgen
+              - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
+              - mediatek,mt7629-topckgen
+              - mediatek,mt7981-topckgen
+              - mediatek,mt7986-topckgen
+              - mediatek,mt8167-topckgen
+              - mediatek,mt8183-topckgen
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8173-topckgen";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 0000000000..df2bec1887
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,lan966x-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
new file mode 100644
index 0000000000..f177036079
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
new file mode 100644
index 0000000000..e4e1c31267
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    items:
+      - description: |
+          clock config registers:
+          These registers contain enable, reset & divider tables for the, cpu,
+          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+          for the peripheral clocks.
+      - description: |
+          mss pll dri registers:
+          Block of registers responsible for dynamic reconfiguration of the mss
+          pll
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
new file mode 100644
index 0000000000..c93d88fdd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+  secondary oscillator connected.
+
+Example:
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		/* optional */
+		microchip,pic32mzda-sosc;
+	};
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+	compatible = "microchip,pic32mzda-uart";
+	reg = <>;
+	interrupts = <>;
+	clocks = <&rootclk PB2CLK>;
+};
diff --git a/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
new file mode 100644
index 0000000000..39559a0a59
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,sparx5-dpll.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,sparx5-dpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 DPLL Clock
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Sparx5 DPLL clock controller generates and supplies clock to
+  various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,sparx5-dpll
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock provider for eMMC:
+  - |
+    lcpll_clk: lcpll-clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <2500000000>;
+    };
+    clks: clock-controller@61110000c {
+        compatible = "microchip,sparx5-dpll";
+        #clock-cells = <1>;
+        clocks = <&lcpll_clk>;
+        reg = <0x1110000c 0x24>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
new file mode 100644
index 0000000000..0af1c569eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Clock Controller
+
+maintainers:
+  - Taichi Sugaya <sugaya.taichi@socionext.com>
+
+description: |
+  Milbeaut SoCs Clock controller is an integrated clock controller, which
+  generates and supplies to all modules.
+
+  This binding uses common clock bindings
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    enum:
+      - socionext,milbeaut-m10v-ccu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: external clock
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock controller node:
+  - |
+    m10v-clk-ctrl@1d021000 {
+        compatible = "socionext,milbeaut-m10v-ccu";
+        reg = <0x1d021000 0x4000>;
+        #clock-cells = <1>;
+        clocks = <&clki40mhz>;
+    };
+
+  # Required an external clock for Clock controller node:
+  - |
+    clocks {
+        clki40mhz: clki40mhz {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <40000000>;
+        };
+        /* other clocks */
+    };
+
+  # The clock consumer shall specify the desired clock-output of the clock
+  # controller as below by specifying output-id in its "clk" phandle cell.
+  # 2: uart
+  # 4: 32-bit timer
+  # 7: UHS-I/II
+  - |
+    serial@1e700010 {
+        compatible = "socionext,milbeaut-usio-uart";
+        reg = <0x1e700010 0x10>;
+        interrupts = <0 141 0x4>, <0 149 0x4>;
+        interrupt-names = "rx", "tx";
+        clocks = <&clk 2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 0000000000..fedea84314
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+	clk_pll: clk_pll@98100000 {
+		compatible = "moxa,moxart-pll-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+	};
+
+	clk_apb: clk_apb@98100000 {
+		compatible = "moxa,moxart-apb-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clocks = <&clk_pll>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 0000000000..a9ad7ab523
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
new file mode 100644
index 0000000000..0df5d75d4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-mpll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 MPLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have an MPLL block that
+  takes the external xtal input and multiplies it to create a high
+  frequency clock and divides that down into a number of clocks that
+  peripherals use.
+
+properties:
+  compatible:
+    const: mstar,msc313-mpll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mpll@206000 {
+        compatible = "mstar,msc313-mpll";
+        reg = <0x206000 0x200>;
+        #clock-cells = <1>;
+        clocks = <&xtal>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
new file mode 100644
index 0000000000..d8f5c490f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -0,0 +1,87 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (L2 Cache clock)
+ 3 = hclk    (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 375:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = l2clk   (L2 Cache clock)
+ 3 = ddrclk  (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 380/385:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = l2clk   (L2 Cache clock)
+ 3 = ddrclk  (DDR clock)
+
+The following is a list of provided IDs and clock names on Armada 39x:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = nbclk   (Coherent Fabric clock)
+ 3 = hclk    (SDRAM Controller Internal Clock)
+ 4 = dclk    (SDRAM Interface Clock)
+ 5 = refclk  (Reference Clock)
+
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = ddrclk   (DDR clock)
+ 3 = mpll    (MPLL Clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk  (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+The following is a list of provided IDs and clock names on Orion5x:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
+	"marvell,armada-375-core-clock" - For Armada 375 SoC core clocks
+	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
+	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
+	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
+	"marvell,dove-core-clock" - for Dove SoC core clocks
+	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
+	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+	"marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC
+	"marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC
+	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
+	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
+	"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+	output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+	compatible = "marvell,dove-core-clock";
+	reg = <0xd0214 0x4>;
+	#clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+	compatible = "marvell,orion-spi";
+	/* ... */
+	/* get tclk from core clock provider */
+	clocks = <&core_clk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
new file mode 100644
index 0000000000..c7b4e3a6b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
@@ -0,0 +1,23 @@
+* Core Divider Clock bindings for Marvell MVEBU SoCs
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = nand (NAND clock)
+
+Required properties:
+- compatible : must be "marvell,armada-370-corediv-clock",
+		       "marvell,armada-375-corediv-clock",
+		       "marvell,armada-380-corediv-clock",
+                       "marvell,mv98dx3236-corediv-clock",
+
+- reg : must be the register address of Core Divider control register
+- #clock-cells : from common clock binding; shall be set to 1
+- clocks : must be set to the parent's phandle
+
+Example:
+
+corediv_clk: corediv-clocks@18740 {
+	compatible = "marvell,armada-370-corediv-clock";
+	reg = <0x18740 0xc>;
+	#clock-cells = <1>;
+	clocks = <&pll>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
new file mode 100644
index 0000000000..7f28506eae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
@@ -0,0 +1,23 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+	"marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
+- reg : Address and length of the clock complex register set, followed
+        by address and length of the PMU DFS registers
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+	#clock-cells = <1>;
+	compatible = "marvell,armada-xp-cpu-clock";
+	reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
+	clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+	compatible = "marvell,sheeva-v7";
+	reg = <0>;
+	clocks = <&cpuclk 0>;
+};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
new file mode 100644
index 0000000000..de562da2ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -0,0 +1,205 @@
+* Gated Clock bindings for Marvell EBU SoCs
+
+Marvell Armada 370/375/380/385/39x/XP, Dove and Kirkwood allow some
+peripheral clocks to be gated to save some power. The clock consumer
+should specify the desired clock by having the clock ID in its
+"clocks" phandle cell. The clock ID is directly mapped to the
+corresponding clock gating control bit in HW to ease manual clock
+lookup in datasheet.
+
+The following is a list of provided IDs for Armada 370:
+ID	Clock	Peripheral
+-----------------------------------
+0	Audio	AC97 Cntrl
+1	pex0_en	PCIe 0 Clock out
+2	pex1_en	PCIe 1 Clock out
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+9	pex1	PCIe Cntrl 1
+15	sata0	SATA Host 0
+17	sdio	SDHCI Host
+23	crypto	CESA (crypto engine)
+25	tdm	Time Division Mplx
+28	ddr	DDR Cntrl
+30	sata1	SATA Host 0
+
+The following is a list of provided IDs for Armada 375:
+ID	Clock		Peripheral
+-----------------------------------
+2	mu		Management Unit
+3	pp		Packet Processor
+4	ptp		PTP
+5	pex0		PCIe 0 Clock out
+6	pex1		PCIe 1 Clock out
+8	audio		Audio Cntrl
+11	nd_clk		Nand Flash Cntrl
+14	sata0_link	SATA 0 Link
+15	sata0_core	SATA 0 Core
+16	usb3		USB3 Host
+17	sdio		SDHCI Host
+18	usb		USB Host
+19	gop		Gigabit Ethernet MAC
+20	sata1_link	SATA 1 Link
+21	sata1_core	SATA 1 Core
+22	xor0		XOR DMA 0
+23	xor1		XOR DMA 0
+24	copro		Coprocessor
+25	tdm		Time Division Mplx
+28	crypto0_enc	Cryptographic Unit Port 0 Encryption
+29	crypto0_core	Cryptographic Unit Port 0 Core
+30	crypto1_enc	Cryptographic Unit Port 1 Encryption
+31	crypto1_core	Cryptographic Unit Port 1 Core
+
+The following is a list of provided IDs for Armada 380/385:
+ID	Clock		Peripheral
+-----------------------------------
+0	audio		Audio
+2	ge2		Gigabit Ethernet 2
+3	ge1		Gigabit Ethernet 1
+4	ge0		Gigabit Ethernet 0
+5	pex1		PCIe 1
+6	pex2		PCIe 2
+7	pex3		PCIe 3
+8	pex0		PCIe 0
+9	usb3h0		USB3 Host 0
+10	usb3h1		USB3 Host 1
+11	usb3d		USB3 Device
+13	bm		Buffer Management
+14	crypto0z	Cryptographic 0 Z
+15	sata0		SATA 0
+16	crypto1z	Cryptographic 1 Z
+17	sdio		SDIO
+18	usb2		USB 2
+21	crypto1		Cryptographic 1
+22	xor0		XOR 0
+23	crypto0		Cryptographic 0
+25	tdm		Time Division Multiplexing
+28	xor1		XOR 1
+30	sata1		SATA 1
+
+The following is a list of provided IDs for Armada 39x:
+ID	Clock		Peripheral
+-----------------------------------
+5	pex1		PCIe 1
+6	pex2		PCIe 2
+7	pex3		PCIe 3
+8	pex0		PCIe 0
+9	usb3h0		USB3 Host 0
+10	usb3h1		USB3 Host 1
+15	sata0		SATA 0
+17	sdio		SDIO
+22	xor0		XOR 0
+28	xor1		XOR 1
+
+The following is a list of provided IDs for Armada XP:
+ID	Clock	Peripheral
+-----------------------------------
+0	audio	Audio Cntrl
+1	ge3	Gigabit Ethernet 3
+2	ge2	Gigabit Ethernet 2
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+6	pex1	PCIe Cntrl 1
+7	pex2	PCIe Cntrl 2
+8	pex3	PCIe Cntrl 3
+13	bp
+14	sata0lnk
+15	sata0	SATA Host 0
+16	lcd	LCD Cntrl
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+19	usb1	USB Host 1
+20	usb2	USB Host 2
+22	xor0	XOR DMA 0
+23	crypto	CESA engine
+25	tdm	Time Division Mplx
+28	xor1	XOR DMA 1
+29	sata1lnk
+30	sata1	SATA Host 1
+
+The following is a list of provided IDs for 98dx3236:
+ID	Clock	Peripheral
+-----------------------------------
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+22	xor0	XOR DMA 0
+
+The following is a list of provided IDs for Dove:
+ID	Clock	Peripheral
+-----------------------------------
+0	usb0	USB Host 0
+1	usb1	USB Host 1
+2	ge	Gigabit Ethernet
+3	sata	SATA Host
+4	pex0	PCIe Cntrl 0
+5	pex1	PCIe Cntrl 1
+8	sdio0	SDHCI Host 0
+9	sdio1	SDHCI Host 1
+10	nand	NAND Cntrl
+11	camera	Camera Cntrl
+12	i2s0	I2S Cntrl 0
+13	i2s1	I2S Cntrl 1
+15	crypto	CESA engine
+21	ac97	AC97 Cntrl
+22	pdma	Peripheral DMA
+23	xor0	XOR DMA 0
+24	xor1	XOR DMA 1
+30	gephy	Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID	Clock	Peripheral
+-----------------------------------
+0	ge0	Gigabit Ethernet 0
+2	pex0	PCIe Cntrl 0
+3	usb0	USB Host 0
+4	sdio	SDIO Cntrl
+5	tsu	Transp. Stream Unit
+6	dunit	SDRAM Cntrl
+7	runit	Runit
+8	xor0	XOR DMA 0
+9	audio	I2S Cntrl 0
+14	sata0	SATA Host 0
+15	sata1	SATA Host 1
+16	xor1	XOR DMA 1
+17	crypto	CESA engine
+18	pex1	PCIe Cntrl 1
+19	ge1	Gigabit Ethernet 1
+20	tdm	Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating
+	"marvell,armada-375-gating-clock" - for Armada 375 SoC clock gating
+	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
+	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
+	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+	"marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
+	"marvell,dove-gating-clock" - for Dove SoC clock gating
+	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+	compatible = "marvell,dove-gating-clock";
+	reg = <0xd0038 0x4>;
+	/* default parent clock is tclk */
+	clocks = <&core_clk 0>;
+	#clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+	compatible = "marvell,dove-sdhci";
+	/* get clk gate bit 8 (sdio0) */
+	clocks = <&gate_clk 8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/nspire-clock.txt b/Documentation/devicetree/bindings/clock/nspire-clock.txt
new file mode 100644
index 0000000000..7c3bc8bb5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nspire-clock.txt
@@ -0,0 +1,24 @@
+TI-NSPIRE Clocks
+
+Required properties:
+- compatible: Valid compatible properties include:
+	"lsi,nspire-cx-ahb-divider" for the AHB divider in the CX model
+	"lsi,nspire-classic-ahb-divider" for the AHB divider in the older model
+	"lsi,nspire-cx-clock" for the base clock in the CX model
+	"lsi,nspire-classic-clock" for the base clock in the older model
+
+- reg: Physical base address of the controller and length of memory mapped
+	region.
+
+Optional:
+- clocks: For the "nspire-*-ahb-divider" compatible clocks, this is the parent
+	clock where it divides the rate from.
+
+Example:
+
+ahb_clk {
+	#clock-cells = <0>;
+	compatible = "lsi,nspire-cx-clock";
+	reg = <0x900B0000 0x4>;
+	clocks = <&base_clk>;
+};
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
new file mode 100644
index 0000000000..8f0c436837
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,ma35d1-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,ma35d1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Clock Controller Module
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description: |
+  The MA35D1 clock controller generates clocks for the whole chip,
+  including system clocks and all peripheral clocks.
+
+  See also:
+    include/dt-bindings/clock/ma35d1-clk.h
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-clk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,pll-mode:
+    description:
+      A list of PLL operation mode corresponding to CAPLL, DDRPLL, APLL,
+      EPLL, and VPLL in sequential.
+    maxItems: 5
+    items:
+      enum:
+        - integer
+        - fractional
+        - spread-spectrum
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    clock-controller@40460200 {
+        compatible = "nuvoton,ma35d1-clk";
+        reg = <0x40460200 0x100>;
+        #clock-cells = <1>;
+        clocks = <&clk_hxt>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
new file mode 100644
index 0000000000..f82064546d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm750-clk.txt
@@ -0,0 +1,100 @@
+* Nuvoton NPCM7XX Clock Controller
+
+Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which
+generates and supplies clocks to all modules within the BMC.
+
+External clocks:
+
+There are six fixed clocks that are generated outside the BMC. All clocks are of
+a known fixed value that cannot be changed. clk_refclk, clk_mcbypck and
+clk_sysbypck are inputs to the clock controller.
+clk_rg1refck, clk_rg2refck and clk_xin are external clocks suppling the
+network. They are set on the device tree, but not used by the clock module. The
+network devices use them directly.
+Example can be found below.
+
+All available clocks are defined as preprocessor macros in:
+dt-bindings/clock/nuvoton,npcm7xx-clock.h
+and can be reused as DT sources.
+
+Required Properties of clock controller:
+
+	- compatible: "nuvoton,npcm750-clk" : for clock controller of Nuvoton
+		  Poleg BMC NPCM750
+
+	- reg: physical base address of the clock controller and length of
+		memory mapped region.
+
+	- #clock-cells: should be 1.
+
+Example: Clock controller node:
+
+	clk: clock-controller@f0801000 {
+		compatible = "nuvoton,npcm750-clk";
+		#clock-cells = <1>;
+		reg = <0xf0801000 0x1000>;
+		clock-names = "refclk", "sysbypck", "mcbypck";
+		clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>;
+	};
+
+Example: Required external clocks for network:
+
+	/* external reference clock */
+	clk_refclk: clk-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "refclk";
+	};
+
+	/* external reference clock for cpu. float in normal operation */
+	clk_sysbypck: clk-sysbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "sysbypck";
+	};
+
+	/* external reference clock for MC. float in normal operation */
+	clk_mcbypck: clk-mcbypck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <800000000>;
+		clock-output-names = "mcbypck";
+	};
+
+	 /* external clock signal rg1refck, supplied by the phy */
+	clk_rg1refck: clk-rg1refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg1refck";
+	};
+
+	 /* external clock signal rg2refck, supplied by the phy */
+	clk_rg2refck: clk-rg2refck {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_rg2refck";
+	};
+
+	clk_xin: clk-xin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clk_xin";
+	};
+
+
+Example: GMAC controller node that consumes two clocks: a generated clk by the
+clock controller and a fixed clock from DT (clk_rg1refck).
+
+	ethernet0: ethernet@f0802000 {
+		compatible = "snps,dwmac";
+		reg = <0xf0802000 0x2000>;
+		interrupts = <0 14 4>;
+		interrupt-names = "macirq";
+		clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+		clock-names = "stmmaceth", "clk_gmac";
+	};
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 0000000000..b901ca13cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
new file mode 100644
index 0000000000..a9ba21144a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra124-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra124-car
+      - nvidia,tegra132-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  nvidia,external-memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the external memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,parent-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              rate of parent clock in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          clocks:
+            items:
+              - description: parent clock of EMC
+
+          clock-names:
+            items:
+              - const: emc-parent
+
+        required:
+          - clock-frequency
+          - nvidia,parent-clock-frequency
+          - clocks
+          - clock-names
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra124-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
new file mode 100644
index 0000000000..f7d347385b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -0,0 +1,155 @@
+NVIDIA Tegra124 DFLL FCPU clocksource
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The DFLL IP block on Tegra is a root clocksource designed for clocking
+the fast CPU cluster. It consists of a free-running voltage controlled
+oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
+control module that will automatically adjust the VDD_CPU voltage by
+communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
+
+Required properties:
+- compatible : should be one of:
+  - "nvidia,tegra124-dfll": for Tegra124
+  - "nvidia,tegra210-dfll": for Tegra210
+- reg : Defines the following set of registers, in the order listed:
+        - registers for the DFLL control logic.
+        - registers for the I2C output logic.
+        - registers for the integrated I2C master controller.
+        - look-up table RAM for voltage register values.
+- interrupts: Should contain the DFLL block interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+  See clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - soc: Clock source for the DFLL control logic.
+  - ref: The closed loop reference clock
+  - i2c: Clock source for the integrated I2C master.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - dvco: Reset control for the DFLL DVCO.
+- #clock-cells: Must be 0.
+- clock-output-names: Name of the clock output.
+- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
+  hardware will start controlling. The regulator will be queried for
+  the I2C register, control values and supported voltages.
+
+Required properties for the control loop parameters:
+- nvidia,sample-rate: Sample rate of the DFLL control loop.
+- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
+- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
+- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
+- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
+- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
+
+Optional properties for the control loop parameters:
+- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
+
+Optional properties for mode selection:
+- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C.
+
+Required properties for I2C mode:
+- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode.
+
+Required properties for PWM mode:
+- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds.
+- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM
+  control is disabled and the PWM output is tristated. Note that this voltage is
+  configured in hardware, typically via a resistor divider.
+- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control
+  is enabled and PWM output is low. Hence, this is the minimum output voltage
+  that the regulator supports when PWM control is enabled.
+- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts
+  corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th
+  duty cycle would be: nvidia,pwm-min-microvolts +
+  nvidia,pwm-voltage-step-microvolts * 2.
+- pinctrl-0: I/O pad configuration when PWM control is enabled.
+- pinctrl-1: I/O pad configuration when PWM control is disabled.
+- pinctrl-names: must include the following entries:
+  - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled.
+  - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled.
+
+Example for I2C:
+
+clock@70110000 {
+        compatible = "nvidia,tegra124-dfll";
+        reg = <0 0x70110000 0 0x100>, /* DFLL control */
+              <0 0x70110000 0 0x100>, /* I2C output control */
+              <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+              <0 0x70110200 0 0x100>; /* Look-up table RAM */
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+                 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+                 <&tegra_car TEGRA124_CLK_I2C5>;
+        clock-names = "soc", "ref", "i2c";
+        resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+        reset-names = "dvco";
+        #clock-cells = <0>;
+        clock-output-names = "dfllCPU_out";
+        vdd-cpu-supply = <&vdd_cpu>;
+
+        nvidia,sample-rate = <12500>;
+        nvidia,droop-ctrl = <0x00000f00>;
+        nvidia,force-mode = <1>;
+        nvidia,cf = <10>;
+        nvidia,ci = <0>;
+        nvidia,cg = <2>;
+
+        nvidia,i2c-fs-rate = <400000>;
+};
+
+Example for PWM:
+
+clock@70110000 {
+	compatible = "nvidia,tegra124-dfll";
+	reg = <0 0x70110000 0 0x100>, /* DFLL control */
+	      <0 0x70110000 0 0x100>, /* I2C output control */
+	      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+	      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+	interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+	         <&tegra_car TEGRA210_CLK_DFLL_REF>,
+		 <&tegra_car TEGRA124_CLK_I2C5>;;
+	clock-names = "soc", "ref", "i2c";
+	resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+	reset-names = "dvco";
+	#clock-cells = <0>;
+	clock-output-names = "dfllCPU_out";
+
+	nvidia,sample-rate = <25000>;
+	nvidia,droop-ctrl = <0x00000f00>;
+	nvidia,force-mode = <1>;
+	nvidia,cf = <6>;
+	nvidia,ci = <0>;
+	nvidia,cg = <2>;
+
+	nvidia,pwm-min-microvolts = <708000>; /* 708mV */
+	nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+	nvidia,pwm-to-pmic;
+	nvidia,pwm-tristate-microvolts = <1000000>;
+	nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */
+
+	pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+	pinctrl-0 = <&dvfs_pwm_active_state>;
+	pinctrl-1 = <&dvfs_pwm_inactive_state>;
+};
+
+/* pinmux nodes added for completeness. Binding doc can be found in:
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
+ */
+
+pinmux: pinmux@700008d4 {
+	dvfs_pwm_active_state: dvfs_pwm_active {
+		dvfs_pwm_pbb1 {
+			nvidia,pins = "dvfs_pwm_pbb1";
+			nvidia,tristate = <TEGRA_PIN_DISABLE>;
+		};
+	};
+	dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+		dvfs_pwm_pbb1 {
+			nvidia,pins = "dvfs_pwm_pbb1";
+			nvidia,tristate = <TEGRA_PIN_ENABLE>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
new file mode 100644
index 0000000000..bee2dd4b29
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Clock and Reset Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Clock and Reset (CAR) is the HW module responsible for muxing and gating
+  Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
+
+  CLKGEN provides the registers to program the PLLs. It controls most of
+  the clock source programming and most of the clock dividers.
+
+  CLKGEN input signals include the external clock for the reference frequency
+  (12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
+
+  Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
+
+  RSTGEN provides the registers needed to control resetting of each block in
+  the Tegra system.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-car
+      - nvidia,tegra30-car
+      - nvidia,tegra114-car
+      - nvidia,tegra210-car
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+patternProperties:
+  "^(sclk)|(pll-[cem])$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - nvidia,tegra20-sclk
+          - nvidia,tegra30-sclk
+          - nvidia,tegra30-pllc
+          - nvidia,tegra30-plle
+          - nvidia,tegra30-pllm
+
+      operating-points-v2: true
+
+      clocks:
+        items:
+          - description: node's clock
+
+      power-domains:
+        maxItems: 1
+        description: phandle to the core SoC power domain
+
+    required:
+      - compatible
+      - operating-points-v2
+      - clocks
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    car: clock-controller@60006000 {
+        compatible = "nvidia,tegra20-car";
+        reg = <0x60006000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        sclk {
+            compatible = "nvidia,tegra20-sclk";
+            operating-points-v2 = <&opp_table>;
+            clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+            power-domains = <&domain>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
new file mode 100644
index 0000000000..20cbca3f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-clk.txt
@@ -0,0 +1,30 @@
+NXP LPC32xx Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-clk"
+- reg:  should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+  clock controller
+- clocks: phandles of external oscillators, the list must contain one
+  32768 Hz oscillator and may have one optional high frequency oscillator
+- clock-names: list of external oscillator clock names, must contain
+  "xtal_32k" and may have optional "xtal"
+
+Examples:
+
+	/* System Control Block */
+	scb {
+		compatible = "simple-bus";
+		ranges = <0x0 0x040004000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		clk: clock-controller@0 {
+			compatible = "nxp,lpc3220-clk";
+			reg = <0x00 0x114>;
+			#clock-cells = <1>;
+
+			clocks = <&xtal_32k>, <&xtal>;
+			clock-names = "xtal_32k", "xtal";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
new file mode 100644
index 0000000000..0aa249409b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nxp,lpc3220-usb-clk.txt
@@ -0,0 +1,22 @@
+NXP LPC32xx USB Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-usb-clk"
+- reg:  should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+  USB clock controller
+
+Examples:
+
+	usb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x31020000 0x00001000>;
+
+		usbclk: clock-controller@f00 {
+			compatible = "nxp,lpc3220-usb-clk";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/pistachio-clock.txt b/Documentation/devicetree/bindings/clock/pistachio-clock.txt
new file mode 100644
index 0000000000..868db499ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pistachio-clock.txt
@@ -0,0 +1,123 @@
+Imagination Technologies Pistachio SoC clock controllers
+========================================================
+
+Pistachio has four clock controllers (core clock, peripheral clock, peripheral
+general control, and top general control) which are instantiated individually
+from the device-tree.
+
+External clocks:
+----------------
+
+There are three external inputs to the clock controllers which should be
+defined with the following clock-output-names:
+- "xtal": External 52Mhz oscillator (required)
+- "audio_clk_in": Alternate audio reference clock (optional)
+- "enet_clk_in": Alternate ethernet PHY clock (optional)
+
+Core clock controller:
+----------------------
+
+The core clock controller generates clocks for the CPU, RPU (WiFi + BT
+co-processor), audio, and several peripherals.
+
+Required properties:
+- compatible: Must be "img,pistachio-clk".
+- reg: Must contain the base address and length of the core clock controller.
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "xtal" (see "External clocks") and
+  "audio_clk_in_gate", "enet_clk_in_gate" which are generated by the
+  top-level general control.
+
+Example:
+	clk_core: clock-controller@18144000 {
+		compatible = "img,pistachio-clk";
+		reg = <0x18144000 0x800>;
+		clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+			 <&cr_top EXT_CLK_ENET_IN>;
+		clock-names = "xtal", "audio_clk_in_gate", "enet_clk_in_gate";
+
+		#clock-cells = <1>;
+	};
+
+Peripheral clock controller:
+----------------------------
+
+The peripheral clock controller generates clocks for the DDR, ROM, and other
+peripherals.  The peripheral system clock ("periph_sys") generated by the core
+clock controller is the input clock to the peripheral clock controller.
+
+Required properties:
+- compatible: Must be "img,pistachio-periph-clk".
+- reg: Must contain the base address and length of the peripheral clock
+  controller.
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "periph_sys", the peripheral system clock generated
+  by the core clock controller.
+
+Example:
+	clk_periph: clock-controller@18144800 {
+		compatible = "img,pistachio-clk-periph";
+		reg = <0x18144800 0x800>;
+		clocks = <&clk_core CLK_PERIPH_SYS>;
+		clock-names = "periph_sys";
+
+		#clock-cells = <1>;
+	};
+
+Peripheral general control:
+---------------------------
+
+The peripheral general control block generates system interface clocks and
+resets for various peripherals.  It also contains miscellaneous peripheral
+control registers.  The system clock ("sys") generated by the peripheral clock
+controller is the input clock to the system clock controller.
+
+Required properties:
+- compatible: Must include "img,pistachio-periph-cr" and "syscon".
+- reg: Must contain the base address and length of the peripheral general
+  control registers.
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Must include "sys", the system clock generated by the peripheral
+  clock controller.
+
+Example:
+	cr_periph: syscon@18144800 {
+		compatible = "img,pistachio-cr-periph", "syscon";
+		reg = <0x18148000 0x1000>;
+		clocks = <&clock_periph PERIPH_CLK_PERIPH_SYS>;
+		clock-names = "sys";
+
+		#clock-cells = <1>;
+	};
+
+Top-level general control:
+--------------------------
+
+The top-level general control block contains miscellaneous control registers and
+gates for the external clocks "audio_clk_in" and "enet_clk_in".
+
+Required properties:
+- compatible: Must include "img,pistachio-cr-top" and "syscon".
+- reg: Must contain the base address and length of the top-level
+  control registers.
+- clocks: Must contain an entry for each clock in clock-names.
+- clock-names: Two optional clocks, "audio_clk_in" and "enet_clk_in" (see
+  "External clocks").
+- #clock-cells: Must be 1.  The single cell is the clock identifier.
+  See dt-bindings/clock/pistachio-clk.h for the list of valid identifiers.
+
+Example:
+	cr_top: syscon@18144800 {
+		compatible = "img,pistachio-cr-top", "syscon";
+		reg = <0x18149000 0x200>;
+		clocks = <&audio_refclk>, <&ext_enet_in>;
+		clock-names = "audio_clk_in", "enet_clk_in";
+
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.yaml b/Documentation/devicetree/bindings/clock/pwm-clock.yaml
new file mode 100644
index 0000000000..f88ecb2995
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pwm-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/pwm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: An external clock signal driven by a PWM pin.
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-clock
+
+  '#clock-cells':
+    const: 0
+
+  clock-frequency:
+    description: Exact output frequency, in case the PWM period is not exact
+      but was rounded to nanoseconds.
+
+  clock-output-names:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+        compatible = "pwm-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+        clock-output-names = "mipi_mclk";
+        pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt
new file mode 100644
index 0000000000..8f67239411
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt
@@ -0,0 +1,15 @@
+* Clock bindings for Marvell PXA chips
+
+Required properties:
+- compatible: Should be "marvell,pxa-clocks"
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell (see include/.../pxa-clock.h).
+
+Examples:
+
+pxa2xx_clks: pxa2xx_clks@41300004 {
+        compatible = "marvell,pxa-clocks";
+        #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
new file mode 100644
index 0000000000..241fb0545b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
@@ -0,0 +1,33 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
+
+The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-pll" and one of the following
+  fallbacks:
+  - "qca,ar7100-pll"
+  - "qca,ar7240-pll"
+  - "qca,ar9130-pll"
+  - "qca,ar9330-pll"
+  - "qca,ar9340-pll"
+  - "qca,qca9550-pll"
+- reg: Base address and size of the controllers memory area
+- clock-names: Name of the input clock, has to be "ref"
+- clocks: phandle of the external reference clock
+- #clock-cells: has to be one
+
+Optional properties:
+- clock-output-names: should be "cpu", "ddr", "ahb"
+
+Example:
+
+	pll-controller@18050000 {
+		compatible = "qca,ar9132-pll", "qca,ar9130-pll";
+		reg = <0x18050000 0x20>;
+
+		clock-names = "ref";
+		clocks = <&extosc>;
+
+		#clock-cells = <1>;
+		clock-output-names = "cpu", "ddr", "ahb";
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
new file mode 100644
index 0000000000..9436266828
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A53 PLL clock
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
+  frequencies above 1GHz.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5332-a53pll
+      - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
+      - qcom,ipq9574-a73pll
+      - qcom,msm8916-a53pll
+      - qcom,msm8939-a53pll
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Example 1 - A53 PLL found on MSM8916 devices
+  - |
+    a53pll: clock@b016000 {
+        compatible = "qcom,msm8916-a53pll";
+        reg = <0xb016000 0x40>;
+        #clock-cells = <0>;
+    };
+  # Example 2 - A53 PLL found on IPQ6018 devices
+  - |
+    a53pll_ipq: clock-controller@b116000 {
+        compatible = "qcom,ipq6018-a53pll";
+        reg = <0x0b116000 0x40>;
+        #clock-cells = <0>;
+        clocks = <&xo>;
+        clock-names = "xo";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
new file mode 100644
index 0000000000..809c34eb7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm A7 PLL clock
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
+  frequency clock to the CPU.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx55-a7pll
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    items:
+      - description: board XO clock
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    a7pll: clock@17808000 {
+        compatible = "qcom,sdx55-a7pll";
+        reg = <0x17808000 0x1000>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "bi_tcxo";
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
new file mode 100644
index 0000000000..8b8932bd5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS Always ON Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-aoncc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3800000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-aoncc";
+      reg = <0x03380000 0x40000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "audio", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
new file mode 100644
index 0000000000..cfca888f60
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS Audio Clock Controller on SM8250 SoCs
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell.
+  See include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h for the full list
+  of Audio Clock controller clock IDs.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-audiocc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
+      - description: Glitch Free Mux register clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    clock-controller@3300000 {
+      #clock-cells = <1>;
+      compatible = "qcom,sm8250-lpass-audiocc";
+      reg = <0x03300000 0x30000>;
+      clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "core", "audio", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
new file mode 100644
index 0000000000..426335a284
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8250
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SM8250.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,sm8250-camcc
+
+  clocks:
+    items:
+      - description: AHB
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+    description:
+      OPP node describing required MMCX performance point.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm8250-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml
new file mode 100644
index 0000000000..3cb996b2c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains for the two MDSS instances on SC8280XP.
+
+  See also:
+    include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-dispcc0
+      - qcom,sc8280xp-dispcc1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: SoC sleep clock
+      - description: DisplayPort 0 link clock
+      - description: DisplayPort 0 VCO div clock
+      - description: DisplayPort 1 link clock
+      - description: DisplayPort 1 VCO div clock
+      - description: DisplayPort 2 link clock
+      - description: DisplayPort 2 VCO div clock
+      - description: DisplayPort 3 link clock
+      - description: DisplayPort 3 VCO div clock
+      - description: DSI 0 PLL byte clock
+      - description: DSI 0 PLL DSI clock
+      - description: DSI 1 PLL byte clock
+      - description: DSI 1 PLL DSI clock
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc8280xp-dispcc0";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&mdss0_dp_phy0 0>,
+               <&mdss0_dp_phy0 1>,
+               <&mdss0_dp_phy1 0>,
+               <&mdss0_dp_phy1 1>,
+               <&mdss0_dp_phy2 0>,
+               <&mdss0_dp_phy2 1>,
+               <&mdss0_dp_phy3 0>,
+               <&mdss0_dp_phy3 1>,
+               <&mdss0_dsi0_phy 0>,
+               <&mdss0_dsi0_phy 1>,
+               <&mdss0_dsi1_phy 0>,
+               <&mdss0_dsi1_phy 1>;
+      power-domains = <&rpmhpd SC8280XP_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 0000000000..0a3ef7fd03
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller on SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6125.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+      - description: GPLL0 div source from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+      - const: gcc_disp_gpll0_div_clk_src
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the CX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk",
+                    "gcc_disp_gpll0_div_clk_src";
+
+      required-opps = <&rpmhpd_opp_ret>;
+      power-domains = <&rpmpd SM6125_VDDCX>;
+
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 0000000000..8efac3fb15
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
new file mode 100644
index 0000000000..59cc88a52f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM8150/SM8250/SM8350
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8150/SM8250/SM8350.
+
+  See also::
+    include/dt-bindings/clock/qcom,dispcc-sm8150.h
+    include/dt-bindings/clock/qcom,dispcc-sm8250.h
+    include/dt-bindings/clock/qcom,dispcc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-dispcc
+      - qcom,sm8150-dispcc
+      - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8250-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
new file mode 100644
index 0000000000..19211176ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8064.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8960.h
+    include/dt-bindings/reset/qcom,gcc-msm8960.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
+
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
+
+  nvmem-cells:
+    minItems: 1
+    maxItems: 2
+    deprecated: true
+    description:
+      Qualcomm TSENS (thermal sensor device) on some devices can
+      be part of GCC and hence the TSENS properties can also be part
+      of the GCC/clock-controller node.
+      For more details on the TSENS properties please refer
+      Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+
+  nvmem-cell-names:
+    minItems: 1
+    deprecated: true
+    items:
+      - const: calib
+      - const: calib_backup
+
+  '#thermal-sensor-cells':
+    const: 1
+    deprecated: true
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-apq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 0000000000..d846082690
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8084.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-apq8084.h
+    include/dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: UFS RX symbol 0 clock
+      - description: UFS RX symbol 1 clock
+      - description: UFS TX symbol 0 clock
+      - description: UFS TX symbol 1 clock
+      - description: SATA ASIC0 clock
+      - description: SATA RX clock
+      - description: PCIe PIPE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+      - const: ufs_tx_symbol_1_clk_src
+      - const: sata_asic0_clk
+      - const: sata_rx_clk
+      - const: pcie_pipe
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clocks = <&xo_board>,
+                 <&sleep_clk>,
+                 <&ufsphy 0>,
+                 <&ufsphy 1>,
+                 <&ufsphy 2>,
+                 <&ufsphy 3>,
+                 <&sata 0>,
+                 <&sata 1>,
+                 <&pcie_phy>;
+        clock-names = "xo",
+                      "sleep_clk",
+                      "ufs_rx_symbol_0_clk_src",
+                      "ufs_rx_symbol_1_clk_src",
+                      "ufs_tx_symbol_0_clk_src",
+                      "ufs_tx_symbol_1_clk_src",
+                      "sata_asic0_clk",
+                      "sata_rx_clk",
+                      "pcie_pipe";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml
new file mode 100644
index 0000000000..fb3957d485
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq4019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ4019
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Robert Marko <robert.markoo@sartura.hr>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ4019.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq4019.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq4019
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq4019";
+      reg = <0x1800000 0x60000>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 0000000000..93f3084b97
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ8064
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8064.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+    include/dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    minItems: 2
+    items:
+      - description: PXO source
+      - description: CXO source
+      - description: PLL4 from LCC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pxo
+      - const: cxo
+      - const: pll4
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+      clock-names = "pxo", "cxo", "pll4";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
new file mode 100644
index 0000000000..52e7831a8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ8074
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8074.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq8074.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq8074
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq8074";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
new file mode 100644
index 0000000000..c9e9855486
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks and resets on
+  MSM8660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8660.h
+    include/dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
new file mode 100644
index 0000000000..b91462587d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8909, MSM8917 and QM215
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8909, MSM8917 or QM215.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8909.h
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8909
+      - qcom,gcc-msm8917
+      - qcom,gcc-qm215
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
new file mode 100644
index 0000000000..ad84c0f768
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8916 or MSM8939.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8916.h
+    include/dt-bindings/clock/qcom,gcc-msm8939.h
+    include/dt-bindings/reset/qcom,gcc-msm8916.h
+    include/dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
new file mode 100644
index 0000000000..fe9fd4cb18
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8953
+
+maintainers:
+  - Adam Skladowski <a_skl39@protonmail.com>
+  - Sireesh Kodali <sireeshkodali@protonmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8953.
+
+  See also: include/dt-bindings/clock/qcom,gcc-msm8953.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8953
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@1800000 {
+        compatible = "qcom,gcc-msm8953";
+        reg = <0x01800000 0x80000>;
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                 <&sleep_clk>,
+                 <&dsi0_phy 1>,
+                 <&dsi0_phy 0>,
+                 <&dsi1_phy 1>,
+                 <&dsi1_phy 0>;
+        clock-names = "xo",
+                      "sleep",
+                      "dsi0pll",
+                      "dsi0pllbyte",
+                      "dsi1pll",
+                      "dsi1pllbyte";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
new file mode 100644
index 0000000000..1927aecc86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8974 (including Pro) and MSM8226
+  Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8974 (all variants) and MSM8226.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+    include/dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-msm8974";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 0000000000..62d6f1fe12
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8976.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
new file mode 100644
index 0000000000..8f0f20c144
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8994
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8994 and MSM8992.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8994.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8992
+      - qcom,gcc-msm8994
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8994";
+      reg = <0x00300000 0x90000>;
+      clocks = <&xo_board>, <&sleep_clk>;
+      clock-names = "xo", "sleep";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
new file mode 100644
index 0000000000..97523cc1ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8996
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which provides the clocks, resets and
+  power domains on MSM8996.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8996.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8996
+
+  clocks:
+    minItems: 3
+    items:
+      - description: XO source
+      - description: Second XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: cxo
+      - const: cxo2
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8996";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
new file mode 100644
index 0000000000..58f7fb22c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8998
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8998.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8998.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8998
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Audio reference clock (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: aud_ref_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-msm8998";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x00100000 0xb0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep>,
+               <0>;
+      clock-names = "xo",
+                    "sleep_clk",
+                    "aud_ref_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
new file mode 100644
index 0000000000..559fc21435
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+    include/dt-bindings/clock/qcom,gcc-msm8953.h
+    include/dt-bindings/clock/qcom,gcc-mdm9607.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-ipq6018
+      - qcom,gcc-mdm9607
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-mdm9607";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
new file mode 100644
index 0000000000..c9bec4656f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCM2290.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcm2290
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-qcm2290";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
new file mode 100644
index 0000000000..7bc6c57e4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on QCS404
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCS404.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-qcs404.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcs404
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: HDMI phy PLL clock
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: hdmi_pll
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-qcs404";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
new file mode 100644
index 0000000000..7aae21a766
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC7180
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7180
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  power-domains:
+    items:
+      - description: CX domain
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7180";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC7180_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
new file mode 100644
index 0000000000..c4ca08d9ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7280
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE-0 pipe clock source
+      - description: PCIE-1 pipe clock source
+      - description: USF phy rx symbol 0 clock source
+      - description: USF phy rx symbol 1 clock source
+      - description: USF phy tx symbol 0 clock source
+      - description: USB30 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk
+      - const: pcie_1_pipe_clk
+      - const: ufs_phy_rx_symbol_0_clk
+      - const: ufs_phy_rx_symbol_1_clk
+      - const: ufs_phy_tx_symbol_0_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+  power-domains:
+    items:
+      - description: CX domain
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7280";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_1_pipe_clk>,
+               <&ufs_phy_rx_symbol_0_clk>, <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk",
+                     "pcie_1_pipe_clk", "ufs_phy_rx_symbol_0_clk",
+                     "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk",
+                     "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      power-domains = <&rpmhpd SC7280_CX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
new file mode 100644
index 0000000000..6c4846b34e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC8180x
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC8180x.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8180x.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8180x
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8180x";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 0000000000..5681e535fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on SC8280xp.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys pipegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SuperSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  power-domains:
+    items:
+      - description: CX domain
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+      power-domains = <&rpmhpd SC8280XP_CX>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
new file mode 100644
index 0000000000..52e7412aac
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660/SDM630/SDM636 Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM630, SDM636 and SDM660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM660:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+        compatible = "qcom,gcc-sdm660";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
new file mode 100644
index 0000000000..0595da0e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM670 and SDM845
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdm845.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM845:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdm845";
+      reg = <0x100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>,
+               <&pcie0_lane>,
+               <&pcie1_lane>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
new file mode 100644
index 0000000000..428e954d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX55
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on SDX55
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx55.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx55
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx55";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo",
+                    "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 0000000000..523e18d7f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX65
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
new file mode 100644
index 0000000000..a5ad0a3da3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6115 and SM4250
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4250/6115.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6115.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6115
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-sm6115";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
new file mode 100644
index 0000000000..8e37623788
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6125
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6125.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6125.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6125
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-sm6125";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
new file mode 100644
index 0000000000..d1b26ab48e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm6350
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm6350";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
new file mode 100644
index 0000000000..58ccb7df84
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8150
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8150.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8150.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8150
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8150";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
new file mode 100644
index 0000000000..5d77c092be
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8250
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8250.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8250.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8250
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8250";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
new file mode 100644
index 0000000000..b4fdde71ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8350
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8350.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8350.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8350
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: UFS card Rx symbol 0 clock source (Optional clock)
+      - description: UFS card Rx symbol 1 clock source (Optional clock)
+      - description: UFS card Tx symbol 0 clock source (Optional clock)
+      - description: UFS phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 phy wrapper pipe clock source (Optional clock)
+      - description: USB3 phy sec pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: ufs_card_rx_symbol_0_clk # Optional clock
+      - const: ufs_card_rx_symbol_1_clk # Optional clock
+      - const: ufs_card_tx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+      - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8350";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
new file mode 100644
index 0000000000..75259f468d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8450
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8450.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8450
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: PCIE 1 Phy Auxiliary clock source (Optional clock)
+      - description: UFS Phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS Phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS Phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 Phy wrapper pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: pcie_1_phy_aux_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8450";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
new file mode 100644
index 0000000000..788825105f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Common Properties
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Common bindings for Qualcomm global clock control module providing the
+  clocks, resets and power domains.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
new file mode 100644
index 0000000000..0518ea963c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SDM630 and SDM660
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and
+  power domains on SDM630 and SDM660.
+
+  See also dt-bindings/clock/qcom,gpucc-sdm660.h.
+
+properties:
+  compatible:
+    enum:
+      - qcom,gpucc-sdm630
+      - qcom,gpucc-sdm660
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main gpu branch
+      - description: GPLL0 divider gpu branch
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gcc_gpu_gpll0_clk
+      - const: gcc_gpu_gpll0_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    clock-controller@5065000 {
+      compatible = "qcom,gpucc-sdm660";
+      reg = <0x05065000 0x9038>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_CLK>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+      clock-names = "xo", "gcc_gpu_gpll0_clk",
+                    "gcc_gpu_gpll0_div_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
new file mode 100644
index 0000000000..f369fa34e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,gpucc-sdm845.h
+    include/dt-bindings/clock/qcom,gpucc-sa8775p.h
+    include/dt-bindings/clock/qcom,gpucc-sc7180.h
+    include/dt-bindings/clock/qcom,gpucc-sc7280.h
+    include/dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    include/dt-bindings/clock/qcom,gpucc-sm6350.h
+    include/dt-bindings/clock/qcom,gpucc-sm8150.h
+    include/dt-bindings/clock/qcom,gpucc-sm8250.h
+    include/dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-gpucc
+      - qcom,sa8775p-gpucc
+      - qcom,sc7180-gpucc
+      - qcom,sc7280-gpucc
+      - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
+      - qcom,sm6350-gpucc
+      - qcom,sm8150-gpucc
+      - qcom,sm8250-gpucc
+      - qcom,sm8350-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_gpu_gpll0_clk_src
+      - const: gcc_gpu_gpll0_div_clk_src
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@5090000 {
+      compatible = "qcom,sdm845-gpucc";
+      reg = <0x05090000 0x9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "gcc_gpu_gpll0_clk_src",
+                    "gcc_gpu_gpll0_div_clk_src";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
new file mode 100644
index 0000000000..ec02a02442
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
@@ -0,0 +1,60 @@
+High-Frequency PLL (HFPLL)
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>:
+		shall contain only one of the following. The generic
+		compatible "qcom,hfpll" should be also included.
+
+                        "qcom,hfpll-ipq8064", "qcom,hfpll"
+                        "qcom,hfpll-apq8064", "qcom,hfpll"
+                        "qcom,hfpll-msm8974", "qcom,hfpll"
+                        "qcom,hfpll-msm8960", "qcom,hfpll"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address and size of HPLL registers. An optional second
+		    element specifies the address and size of the alias
+		    register region.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the xo clock.
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "xo".
+
+- clock-output-names:
+	Usage: required
+	Value type: <string>
+	Definition: Name of the PLL. Typically hfpllX where X is a CPU number
+		    starting at 0. Otherwise hfpll_Y where Y is more specific
+		    such as "l2".
+
+Example:
+
+1) An HFPLL for the L2 cache.
+
+	clock-controller@f9016000 {
+		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+		reg = <0xf9016000 0x30>;
+		clocks = <&xo_board>;
+		clock-names = "xo";
+		clock-output-names = "hfpll_l2";
+	};
+
+2) An HFPLL for CPU0. This HFPLL has the alias register region.
+
+	clock-controller@f908a000 {
+		compatible = "qcom,hfpll-ipq8064", "qcom,hfpll";
+		reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
+		clocks = <&xo_board>;
+		clock-names = "xo";
+		clock-output-names = "hfpll0";
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
new file mode 100644
index 0000000000..ef84a0c95f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5018-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5018
+
+maintainers:
+  - Sricharan Ramabadhran <quic_srichara@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5018
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq5018-gcc.h
+    include/dt-bindings/reset/qcom,ipq5018-gcc.h
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq5018
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE20 PHY0 pipe clock source
+      - description: PCIE20 PHY1 pipe clock source
+      - description: USB3 PHY pipe clock source
+      - description: GEPHY RX clock source
+      - description: GEPHY TX clock source
+      - description: UNIPHY RX clock source
+      - description: UNIPHY TX clk source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq5018";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&pcie20_phy0_pipe_clk>,
+               <&pcie20_phy1_pipe_clk>,
+               <&usb3_phy0_pipe_clk>,
+               <&gephy_rx_clk>,
+               <&gephy_tx_clk>,
+               <&uniphy_rx_clk>,
+               <&uniphy_tx_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
new file mode 100644
index 0000000000..718fe06254
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5332-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5332
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5332.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq5332.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq5332-gcc
+
+  clocks:
+    items:
+      - description: Board XO clock source
+      - description: Sleep clock source
+      - description: PCIE 2lane PHY pipe clock source
+      - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
+      - description: USB PCIE wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq5332-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board>,
+               <&sleep_clk>,
+               <&pcie_2lane_phy_pipe_clk>,
+               <&pcie_2lane_phy_pipe_clk_x1>,
+               <&usb_pcie_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
new file mode 100644
index 0000000000..944a0ea79c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ9574
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Anusha Rao <quic_anusha@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ9574
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq9574-gcc.h
+    include/dt-bindings/reset/qcom,ipq9574-gcc.h
+
+properties:
+  compatible:
+    const: qcom,ipq9574-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Bias PLL ubi clock source
+      - description: PCIE30 PHY0 pipe clock source
+      - description: PCIE30 PHY1 pipe clock source
+      - description: PCIE30 PHY2 pipe clock source
+      - description: PCIE30 PHY3 pipe clock source
+      - description: USB3 PHY pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq9574-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&bias_pll_ubi_nc_clk>,
+               <&pcie30_phy0_pipe_clk>,
+               <&pcie30_phy1_pipe_clk>,
+               <&pcie30_phy2_pipe_clk>,
+               <&pcie30_phy3_pipe_clk>,
+               <&usb3phy_0_cc_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml
new file mode 100644
index 0000000000..57632757d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-acc-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Application Clock Controller (ACC) v1
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+  There is one ACC register region per CPU within the KPSS remapped region as
+  well as an alias register region that remaps accesses to the ACC associated
+  with the CPU accessing the region. ACC v1 is currently used as a
+  clock-controller for enabling the cpu and handling the aux clocks.
+
+properties:
+  compatible:
+    const: qcom,kpss-acc-v1
+
+  reg:
+    items:
+      - description: Base address and size of the register region
+      - description: Optional base address and size of the alias register region
+    minItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  clock-output-names:
+    description: Name of the aux clock. Krait can have at most 4 cpu.
+    enum:
+      - acpu0_aux
+      - acpu1_aux
+      - acpu2_aux
+      - acpu3_aux
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2088000 {
+      compatible = "qcom,kpss-acc-v1";
+      reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      clock-output-names = "acpu0_aux";
+      #clock-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml
new file mode 100644
index 0000000000..88b7672123
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  Krait Processor Sub-system (KPSS) Global Clock Controller (GCC). Used
+  to control L2 mux (in the current implementation) and provide access
+  to the kpss-gcc registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+          - qcom,kpss-gcc-msm8660
+          - qcom,kpss-gcc-mdm9615
+      - const: qcom,kpss-gcc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+then:
+  required:
+    - clocks
+    - clock-names
+    - '#clock-cells'
+else:
+  properties:
+    clock: false
+    clock-names: false
+    '#clock-cells': false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+      reg = <0x2011000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      #clock-cells = <0>;
+    };
+
+  - |
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
+      reg = <0x02011000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
new file mode 100644
index 0000000000..030ba60dab
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
@@ -0,0 +1,34 @@
+Krait Clock Controller
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+			"qcom,krait-cc-v1"
+			"qcom,krait-cc-v2"
+
+- #clock-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the clock parents of hfpll, secondary muxes.
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb".
+
+Example:
+
+	kraitcc: clock-controller {
+		compatible = "qcom,krait-cc-v1";
+		clocks = <&hfpll0>, <&hfpll1>, <&acpu0_aux>, <&acpu1_aux>, <qsb>;
+		clock-names = "hfpll0", "hfpll1", "acpu0_aux", "acpu1_aux", "qsb";
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.yaml b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml
new file mode 100644
index 0000000000..55985e562a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,lcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Clock & Reset Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,lcc-apq8064
+      - qcom,lcc-ipq8064
+      - qcom,lcc-mdm9615
+      - qcom,lcc-msm8960
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    maxItems: 8
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-apq8064
+              - qcom,lcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-mdm9615
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board CXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: cxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+examples:
+  - |
+    clock-controller@28000000 {
+        compatible = "qcom,lcc-ipq8064";
+        reg = <0x28000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
new file mode 100644
index 0000000000..aa35a40648
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multimedia Clock & Reset Controller
+
+maintainers:
+  - Jeffrey Hugo <quic_jhugo@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm multimedia clock control module provides the clocks, resets and
+  power domains.
+
+properties:
+  compatible:
+    enum:
+      - qcom,mmcc-apq8064
+      - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
+      - qcom,mmcc-msm8660
+      - qcom,mmcc-msm8960
+      - qcom,mmcc-msm8974
+      - qcom,mmcc-msm8992
+      - qcom,mmcc-msm8994
+      - qcom,mmcc-msm8996
+      - qcom,mmcc-msm8998
+      - qcom,mmcc-sdm630
+      - qcom,mmcc-sdm660
+
+  clocks:
+    minItems: 7
+    maxItems: 13
+
+  clock-names:
+    minItems: 7
+    maxItems: 13
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding
+
+  vdd-gfx-supply:
+    description:
+      Regulator supply for the GPU_GX GDSC
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8226
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8974
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8084
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: mmss_gpll0_vote
+            - const: gpll0
+            - const: gpll0_vote
+            - const: gpll1
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+            - description: Global PLL 0 DIV clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+            - const: gpll0_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
+
+examples:
+  # Example for MMCC for MSM8960:
+  - |
+    clock-controller@4000000 {
+      compatible = "qcom,mmcc-msm8960";
+      reg = <0x4000000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
new file mode 100644
index 0000000000..fcace96c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-apcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm clock controller for MSM8996 CPUs
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm CPU clock controller for MSM8996 CPUs, clock 0 is for Power cluster
+  and clock 1 is for Perf cluster.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-apcc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: SYS APCS AUX clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sys_apcs_aux
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    kryocc: clock-controller@6400000 {
+        compatible = "qcom,msm8996-apcc";
+        reg = <0x6400000 0x90000>;
+        #clock-cells = <1>;
+
+        clocks = <&xo_board>, <&apcs_glb>;
+        clock-names = "xo", "sys_apcs_aux";
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
new file mode 100644
index 0000000000..0dfbd8c4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-cbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Core Bus Fabric (CBF) clock controller
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: >
+  The clock controller for the Qualcomm MSM8996 CBF clock, which drives the
+  interconnect between two CPU clusters.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-cbf
+      - qcom,msm8996pro-cbf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: SYS APCS AUX clock
+
+  '#clock-cells':
+    const: 0
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@9a11000 {
+        compatible = "qcom,msm8996-cbf";
+        reg = <0x09a11000 0x10000>;
+        clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+        #clock-cells = <0>;
+        #interconnect-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
new file mode 100644
index 0000000000..7b271ae210
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on MSM8998
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on MSM8998.
+
+  See also:: include/dt-bindings/clock/qcom,gpucc-msm8998.h
+
+properties:
+  compatible:
+    const: qcom,msm8998-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source (gcc_gpu_gpll0_clk_src)
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gpll0
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5065000 {
+      compatible = "qcom,msm8998-gpucc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x05065000 0x9000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0_OUT_MAIN>;
+      clock-names = "xo", "gpll0";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
new file mode 100644
index 0000000000..03fa30fe92
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,q6sstopcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Q6SSTOP clock Controller
+
+maintainers:
+  - Govind Singh <govinds@codeaurora.org>
+
+properties:
+  compatible:
+    const: qcom,qcs404-q6sstopcc
+
+  reg:
+    items:
+      - description: Q6SSTOP clocks register region
+      - description: Q6SSTOP_TCSR register region
+
+  clocks:
+    items:
+      - description: ahb clock for the q6sstopCC
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    q6sstopcc: clock-controller@7500000 {
+      compatible = "qcom,qcs404-q6sstopcc";
+      reg = <0x07500000 0x4e000>, <0x07550000 0x10000>;
+      clocks = <&gcc 141>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 0000000000..4a00f2d416
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on qcm2290.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml
new file mode 100644
index 0000000000..d712b1a87e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+  - Imran Shaik <quic_imrashai@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QDU1000 and QRU1000
+
+  See also:: include/dt-bindings/clock/qcom,qdu1000-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qdu1000-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 0 Phy Auxiliary clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qdu1000-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_0_phy_aux_clk>,
+               <&usb3_phy_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 0000000000..3665dd3060
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8917
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8917
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
new file mode 100644
index 0000000000..fd14d18309
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Clocks
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Resource Power Manager Hardened (RPMh) manages shared resources on
+  some Qualcomm Technologies Inc. SoCs. It accepts clock requests from
+  other hardware subsystems via RSC to control clocks.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-rpmh-clk
+      - qcom,sa8775p-rpmh-clk
+      - qcom,sc7180-rpmh-clk
+      - qcom,sc7280-rpmh-clk
+      - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
+      - qcom,sdm845-rpmh-clk
+      - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
+      - qcom,sdx75-rpmh-clk
+      - qcom,sm6350-rpmh-clk
+      - qcom,sm8150-rpmh-clk
+      - qcom,sm8250-rpmh-clk
+      - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
+      - qcom,sm8550-rpmh-clk
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xo
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Example for GCC for SDM845: The below node should be defined inside
+  # &apps_rsc node.
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    rpmhcc: clock-controller {
+      compatible = "qcom,sdm845-rpmh-clk";
+      clocks = <&xo_board>;
+      clock-names = "xo";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
new file mode 100644
index 0000000000..0f641c235b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sa8775p
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on sa8775p.
+
+  See also:: include/dt-bindings/clock/qcom,sa8775p-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sa8775p-gcc
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB3 PHY wrapper pipe clock
+      - description: Secondary USB3 PHY wrapper pipe clock
+      - description: PCIe 0 pipe clock
+      - description: PCIe 1 pipe clock
+      - description: PCIe PHY clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  protected-clocks:
+    maxItems: 240
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    gcc: clock-controller@100000 {
+        compatible = "qcom,sa8775p-gcc";
+        reg = <0x100000 0xc7018>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&sleep_clk>,
+                 <&ufs_phy_rx_symbol_0_clk>,
+                 <&ufs_phy_rx_symbol_1_clk>,
+                 <&ufs_phy_tx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_1_clk>,
+                 <&ufs_card_tx_symbol_0_clk>,
+                 <&usb_0_ssphy>,
+                 <&usb_1_ssphy>,
+                 <&pcie_0_pipe_clk>,
+                 <&pcie_1_pipe_clk>,
+                 <&pcie_phy_pipe_clk>,
+                 <&rxc0_ref_clk>,
+                 <&rxc1_ref_clk>;
+        power-domains = <&rpmhpd SA8775P_CX>;
+
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
new file mode 100644
index 0000000000..2dfc2a4f19
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Camera_ahb clock from GCC
+      - description: Camera XO clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: iface
+      - const: xo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7180-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_CAMERA_AHB_CLK>,
+               <&gcc GCC_CAMERA_XO_CLK>;
+      clock-names = "bi_tcxo", "iface", "xo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
new file mode 100644
index 0000000000..1c9ce300a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc7180-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
new file mode 100644
index 0000000000..fdfb389083
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-lpasshm
+      - qcom,sc7180-lpasscorecc
+
+  clocks:
+    items:
+      - description: gcc_lpass_sway clock from GCC
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bi_tcxo
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: lpass core cc register
+      - description: lpass audio cc register
+
+  reg-names:
+    items:
+      - const: lpass_core_cc
+      - const: lpass_audio_cc
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,sc7180-lpasshm
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+else:
+  properties:
+    reg:
+      minItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@63000000 {
+      compatible = "qcom,sc7180-lpasshm";
+      reg = <0x63000000 0x28>;
+      clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+    clock-controller@62d00000 {
+      compatible = "qcom,sc7180-lpasscorecc";
+      reg = <0x62d00000 0x50000>, <0x62780000 0x30000>;
+      reg-names = "lpass_core_cc", "lpass_audio_cc";
+      clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
new file mode 100644
index 0000000000..873a2f918b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Modem Clock Controller on SC7180
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm modem clock control module provides the clocks on SC7180.
+
+  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,sc7180-mss
+
+  clocks:
+    items:
+      - description: gcc_mss_mfab_axi clock from GCC
+      - description: gcc_mss_nav_axi clock from GCC
+      - description: gcc_mss_cfg_ahb clock from GCC
+
+  clock-names:
+    items:
+      - const: gcc_mss_mfab_axis
+      - const: gcc_mss_nav_axi
+      - const: cfg_ahb
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    clock-controller@41a8000 {
+      compatible = "qcom,sc7180-mss";
+      reg = <0x041a8000 0x8000>;
+      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+               <&gcc GCC_MSS_NAV_AXI_CLK>,
+               <&gcc GCC_MSS_CFG_AHB_CLK>;
+      clock-names = "gcc_mss_mfab_axis",
+                    "gcc_mss_nav_axi",
+                    "cfg_ahb";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
new file mode 100644
index 0000000000..01feef1cab
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,sc7280-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO active source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7280-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
new file mode 100644
index 0000000000..c42b0ef613
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,sc7280-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: Link clock from EDP PHY
+      - description: VCO DIV clock from EDP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: edp_phy_pll_link_clk
+      - const: edp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc7280-dispcc";
+      reg = <0x0af00000 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&edp_phy 0>,
+               <&edp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "edp_phy_pll_link_clk",
+                    "edp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
new file mode 100644
index 0000000000..f44c5c130d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpasscc
+
+  clocks:
+    items:
+      - description: gcc_cfg_noc_lpass_clk from GCC
+
+  clock-names:
+    items:
+      - const: iface
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    items:
+      - description: LPASS qdsp6ss register
+      - description: LPASS top-cc register
+
+  reg-names:
+    items:
+      - const: qdsp6ss
+      - const: top_cc
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      remoteproc peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+    clock-controller@3000000 {
+      compatible = "qcom,sc7280-lpasscc";
+      reg = <0x03000000 0x40>, <0x03c04000 0x4>;
+      reg-names = "qdsp6ss", "top_cc";
+      clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+      clock-names = "iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 0000000000..deee5423d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks and
+  power domains on SC7280.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+    include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  reg: true
+
+  compatible:
+    enum:
+      - qcom,sc7280-lpassaoncc
+      - qcom,sc7280-lpassaudiocc
+      - qcom,sc7280-lpasscorecc
+      - qcom,sc7280-lpasshm
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpassaudiocc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: lpass_aon_cc_main_rcg_clk_src
+
+        reg:
+          items:
+            - description: lpass core cc register
+            - description: lpass audio csr register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpassaoncc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active only source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: iface
+
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpasshm
+              - qcom,sc7280-lpasscorecc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+        reg:
+          maxItems: 1
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_audiocc: clock-controller@3300000 {
+      compatible = "qcom,sc7280-lpassaudiocc";
+      reg = <0x3300000 0x30000>,
+            <0x32a9000 0x1000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+      clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+      power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_hm: clock-controller@3c00000 {
+      compatible = "qcom,sc7280-lpasshm";
+      reg = <0x3c00000 0x28>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpasscore: clock-controller@3900000 {
+      compatible = "qcom,sc7280-lpasscorecc";
+      reg = <0x3900000 0x50000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_aon: clock-controller@3380000 {
+      compatible = "qcom,sc7280-lpassaoncc";
+      reg = <0x3380000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+               <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
new file mode 100644
index 0000000000..3326dcd676
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc8280xp-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC8280XP
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks,
+  and reset on SC8280XP.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-lpassaudiocc
+      - qcom,sc8280xp-lpasscc
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpass_audiocc: clock-controller@32a9000 {
+        compatible = "qcom,sc8280xp-lpassaudiocc";
+        reg = <0x032a9000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+    lpasscc: clock-controller@33e0000 {
+        compatible = "qcom,sc8280xp-lpasscc";
+        reg = <0x033e0000 0x12000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 0000000000..91d1f79180
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SDM845.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
new file mode 100644
index 0000000000..719844d7ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SDM845
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SDM845.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-dispcc
+
+  # NOTE: sdm845.dtsi existed for quite some time and specified no clocks.
+  # The code had to use hardcoded mechanisms to find the input clocks.
+  # New dts files should have these clocks.
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_link_clk_divsel_ten
+      - const: dp_vco_divided_clk_src_mux
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sdm845-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "gcc_disp_gpll0_div_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_link_clk_divsel_ten",
+                    "dp_vco_divided_clk_src_mux";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml
new file mode 100644
index 0000000000..a96fd837c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 LPASS Clock Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-lpasscc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cc
+      - const: qdsp6ss
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@17014000 {
+        compatible = "qcom,sdm845-lpasscc";
+        reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+        reg-names = "cc", "qdsp6ss";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
new file mode 100644
index 0000000000..98921fa236
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdx75-gcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdx75-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX75
+
+maintainers:
+  - Imran Shaik <quic_imrashai@quicinc.com>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX75
+
+  See also:: include/dt-bindings/clock/qcom,sdx75-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sdx75-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: EMAC0 sgmiiphy mac rclk source
+      - description: EMAC0 sgmiiphy mac tclk source
+      - description: EMAC0 sgmiiphy rclk source
+      - description: EMAC0 sgmiiphy tclk source
+      - description: EMAC1 sgmiiphy mac rclk source
+      - description: EMAC1 sgmiiphy mac tclk source
+      - description: EMAC1 sgmiiphy rclk source
+      - description: EMAC1 sgmiiphy tclk source
+      - description: PCIE20 phy aux clock source
+      - description: PCIE_1 Pipe clock source
+      - description: PCIE_2 Pipe clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@80000 {
+      compatible = "qcom,sdx75-gcc";
+      reg = <0x80000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, <&emac0_sgmiiphy_mac_rclk>,
+               <&emac0_sgmiiphy_mac_tclk>, <&emac0_sgmiiphy_rclk>, <&emac0_sgmiiphy_tclk>,
+               <&emac1_sgmiiphy_mac_rclk>, <&emac1_sgmiiphy_mac_tclk>, <&emac1_sgmiiphy_rclk>,
+               <&emac1_sgmiiphy_tclk>, <&pcie20_phy_aux_clk>, <&pcie_1_pipe_clk>,
+               <&pcie_2_pipe_clk>, <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 0000000000..f802a2e7f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6115.
+
+  See also:: include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml
new file mode 100644
index 0000000000..cf19f44af7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6115
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6115-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 main div source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6115-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml
new file mode 100644
index 0000000000..374a1844a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6125-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6125
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks and power domains on
+  Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6125-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6125-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>;
+            #clock-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
new file mode 100644
index 0000000000..fd6658cb79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6350-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and  power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm6350-camcc";
+      reg = <0x0ad00000 0x16000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml
new file mode 100644
index 0000000000..183b1c75db
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6375.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6375.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6375-dispcc";
+      reg = <0x05f00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
new file mode 100644
index 0000000000..295d4bb1a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6375
+
+  See also:: include/dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
new file mode 100644
index 0000000000..cf4cad76f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6375-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6375-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+      - description: SNoC DVM GFX source
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the VDD_GX power rail
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required VDD_GX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6375-gpucc";
+            reg = <0 0x05990000 0 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
+                     <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+            power-domains = <&rpmpd SM6375_VDDGX>;
+            required-opps = <&rpmpd_opp_low_svs>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml
new file mode 100644
index 0000000000..0eb76d9d51
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM7150
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <davidwronek@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM7150
+
+  See also:: include/dt-bindings/clock/qcom,sm7150-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm7150-gcc";
+      reg = <0x00100000 0x001f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
new file mode 100644
index 0000000000..46d1d91e3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8350-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Video Clock & Reset Controller
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sm8350.h
+    include/dt-bindings/reset/qcom,videocc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-videocc
+      - qcom,sm8350-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Board sleep clock
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - power-domains
+  - required-opps
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    clock-controller@abf0000 {
+      compatible = "qcom,sm8350-videocc";
+      reg = <0x0abf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
new file mode 100644
index 0000000000..8178c35bc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,sm8450-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8450-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm8450-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
new file mode 100644
index 0000000000..2f22310b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
new file mode 100644
index 0000000000..2320be920a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM8450
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,sm8450-gpucc.h
+    include/dt-bindings/clock/qcom,sm8550-gpucc.h
+    include/dt-bindings/reset/qcom,sm8450-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-gpucc
+      - qcom,sm8550-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8450-gpucc";
+            reg = <0 0x03d90000 0 0xa000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
new file mode 100644
index 0000000000..bad8f019a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller on SM8450
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-videocc
+      - qcom,sm8550-videocc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Video AHB clock from GCC
+
+  power-domains:
+    maxItems: 1
+    description:
+      MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    videocc: clock-controller@aaf0000 {
+      compatible = "qcom,sm8450-videocc";
+      reg = <0x0aaf0000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_VIDEO_AHB_CLK>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
new file mode 100644
index 0000000000..c129f8c16b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8550.
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8550-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp0_phy 0>,
+               <&dp0_phy 1>,
+               <&dp1_phy 0>,
+               <&dp1_phy 1>,
+               <&dp2_phy 0>,
+               <&dp2_phy 1>,
+               <&dp3_phy 0>,
+               <&dp3_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
new file mode 100644
index 0000000000..0c706de31c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8550-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8550-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
new file mode 100644
index 0000000000..1bf1a41fd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TCSR Clock Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm TCSR clock control module provides the clocks, resets and
+  power domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8550-tcsr
+      - const: syscon
+
+  clocks:
+    items:
+      - description: TCXO pad clock
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@1fc0000 {
+      compatible = "qcom,sm8550-tcsr", "syscon";
+      reg = <0x1fc0000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
new file mode 100644
index 0000000000..16c95ad6c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,spmi-clkdiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMIC clock divider
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  Qualcomm SPMI PMIC clock divider configures the clock frequency of a set of
+  outputs on the PMIC.  These clocks are typically wired through alternate
+  functions on GPIO pins.
+
+properties:
+  compatible:
+    const: qcom,spmi-clkdiv
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: xo
+
+  "#clock-cells":
+    const: 1
+
+  qcom,num-clkdivs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of CLKDIV peripherals.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - qcom,num-clkdivs
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-controller@5b00 {
+            compatible = "qcom,spmi-clkdiv";
+            reg = <0x5b00>;
+            clocks = <&xo_board>;
+            clock-names = "xo";
+            #clock-cells = <1>;
+            qcom,num-clkdivs = <3>;
+
+            assigned-clocks = <&pm8998_clk_divs 1>,
+                              <&pm8998_clk_divs 2>,
+                              <&pm8998_clk_divs 3>;
+            assigned-clock-rates = <9600000>,
+                                   <9600000>,
+                                   <9600000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,turingcc.txt b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt
new file mode 100644
index 0000000000..126517de5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,turingcc.txt
@@ -0,0 +1,19 @@
+Qualcomm Turing Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible: shall contain "qcom,qcs404-turingcc".
+- reg: shall contain base register location and length.
+- clocks: ahb clock for the TuringCC
+- #clock-cells: from common clock binding, shall contain 1.
+- #reset-cells: from common reset binding, shall contain 1.
+
+Example:
+	turingcc: clock-controller@800000 {
+		compatible = "qcom,qcs404-turingcc";
+		reg = <0x00800000 0x30000>;
+		clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
new file mode 100644
index 0000000000..6999e36ace
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller
+
+maintainers:
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sc7180.h
+    include/dt-bindings/clock/qcom,videocc-sc7280.h
+    include/dt-bindings/clock/qcom,videocc-sdm845.h
+    include/dt-bindings/clock/qcom,videocc-sm8150.h
+    include/dt-bindings/clock/qcom,videocc-sm8250.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-videocc
+      - qcom,sc7280-videocc
+      - qcom,sdm845-videocc
+      - qcom,sm8150-videocc
+      - qcom,sm8250-videocc
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-videocc
+            - qcom,sdm845-videocc
+            - qcom,sm8150-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8250-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    clock-controller@ab00000 {
+      compatible = "qcom,sdm845-videocc";
+      reg = <0x0ab00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd RPMHPD_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
new file mode 100644
index 0000000000..10119d9ef4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -0,0 +1,212 @@
+* Clock Block on Freescale QorIQ Platforms
+
+Freescale QorIQ chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+
+Chassis Version		Example Chips
+---------------		-------------
+1.0			p4080, p5020, p5040
+2.0			t4240, b4860
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a chip-specific clock block compatible
+	string and (if applicable) may contain a chassis-version clock
+	compatible string.
+
+	Chip-specific strings are of the form "fsl,<chip>-clockgen", such as:
+	* "fsl,p2041-clockgen"
+	* "fsl,p3041-clockgen"
+	* "fsl,p4080-clockgen"
+	* "fsl,p5020-clockgen"
+	* "fsl,p5040-clockgen"
+	* "fsl,t1023-clockgen"
+	* "fsl,t1024-clockgen"
+	* "fsl,t1040-clockgen"
+	* "fsl,t1042-clockgen"
+	* "fsl,t2080-clockgen"
+	* "fsl,t2081-clockgen"
+	* "fsl,t4240-clockgen"
+	* "fsl,b4420-clockgen"
+	* "fsl,b4860-clockgen"
+	* "fsl,ls1012a-clockgen"
+	* "fsl,ls1021a-clockgen"
+	* "fsl,ls1028a-clockgen"
+	* "fsl,ls1043a-clockgen"
+	* "fsl,ls1046a-clockgen"
+	* "fsl,ls1088a-clockgen"
+	* "fsl,ls2080a-clockgen"
+	* "fsl,lx2160a-clockgen"
+	Chassis-version clock strings include:
+	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+	address space defined by its parent bus, and resource zero
+	represents the clock register set
+
+Optional properties:
+- ranges: Allows valid translation between child's address space and
+	parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+	physical base addresses.  Must be present if the device has
+	sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+	the size of an address. Must be present if the device has
+	sub-nodes and set to 1 if present
+- clock-frequency: Input system clock frequency (SYSCLK)
+- clocks: If clock-frequency is not specified, sysclk may be provided
+	as an input clock.  Either clock-frequency or clocks must be
+	provided.
+	A second input clock, called "coreclk", may be provided if
+	core PLLs are based on a different input clock from the
+	platform PLL.
+- clock-names: Required if a coreclk is present.  Valid names are
+	"sysclk" and "coreclk".
+
+2. Clock Provider
+
+The clockgen node should act as a clock provider, though in older device
+trees the children of the clockgen node are the clock providers.
+
+When the clockgen node is a clock provider, #clock-cells = <2>.
+The first cell of the clock specifier is the clock type, and the
+second cell is the clock index for the specified type.
+
+	Type#	Name		Index Cell
+	0	sysclk		must be 0
+	1	cmux		index (n in CLKCnCSR)
+	2	hwaccel		index (n in CLKCGnHWACSR)
+	3	fman		0 for fm1, 1 for fm2
+	4	platform pll	n=pll/(n+1). For example, when n=1,
+				that means output_freq=PLL_freq/2.
+	5	coreclk		must be 0
+
+3. Example
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#clock-cells = <2>;
+	};
+
+	fman@400000 {
+		...
+		clocks = <&clockgen 3 0>;
+		...
+	};
+}
+4. Legacy Child Nodes
+
+NOTE: These nodes are deprecated.  Kernels should continue to support
+device trees with these nodes, but new device trees should not use them.
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
+	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
+- #clock-cells: From common clock binding. The number of cells in a
+	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+	clock-specifier cell may take the following values:
+	* 0 - equal to the PLL frequency
+	* 1 - equal to the PLL frequency divided by 2
+	* 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+	output clocks
+- reg: Should be the offset and length of clock block base address.
+	The length should be 4.
+
+Legacy Example:
+/ {
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-1.0";
+			clock-output-names = "sysclk";
+		};
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux1";
+		};
+
+		platform-pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
+	};
+};
+
+Example for legacy clock consumer:
+
+/ {
+	cpu0: PowerPC,e5500@0 {
+		...
+		clocks = <&mux0>;
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
new file mode 100644
index 0000000000..42b6f80613
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,5p35023.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,5p35023.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 5p35023 VersaClock 3 programmable I2C clock generator
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The 5P35023 is a VersaClock programmable clock generator and
+  is designed for low-power, consumer, and high-performance PCI
+  express applications. The 5P35023 device is a three PLL
+  architecture design, and each PLL is individually programmable
+  and allowing for up to 6 unique frequency outputs.
+
+  An internal OTP memory allows the user to store the configuration
+  in the device. After power up, the user can change the device register
+  settings through the I2C interface when I2C mode is selected.
+
+  The driver can read a full register map from the DT, and will use that
+  register map to initialize the attached part (via I2C) when the system
+  boots. Any configuration not supported by the common clock framework
+  must be done via the full register map, including optimized settings.
+
+  Link to datasheet:
+  https://www.renesas.com/us/en/products/clocks-timing/clock-generation/programmable-clocks/5p35023-versaclock-3s-programmable-clock-generator
+
+properties:
+  compatible:
+    enum:
+      - renesas,5p35023
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      The index in the assigned-clocks is mapped to the output clock as below
+      0 - REF, 1 - SE1, 2 - SE2, 3 - SE3, 4 - DIFF1, 5 - DIFF2.
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  renesas,settings:
+    description: Optional, complete register map of the device.
+      Optimized settings for the device must be provided in full
+      and are written during initialization.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 37
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        versa3: clock-generator@68 {
+            compatible = "renesas,5p35023";
+            reg = <0x68>;
+            #clock-cells = <1>;
+
+            clocks = <&x1>;
+
+            renesas,settings = [
+                80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+                00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+                80 b0 45 c4 95
+            ];
+
+            assigned-clocks = <&versa3 0>, <&versa3 1>,
+                              <&versa3 2>, <&versa3 3>,
+                              <&versa3 4>, <&versa3 5>;
+            assigned-clock-rates = <24000000>, <11289600>,
+                                   <11289600>, <12000000>,
+                                   <25000000>, <12288000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
new file mode 100644
index 0000000000..3afdebdb52
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+  - 9FGV0441:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+      - renesas,9fgv0441
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
new file mode 100644
index 0000000000..9185d10173
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-clocks.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) generates core clocks for the SoC.  It
+  includes PLLs, and fixed and variable ratio dividers.
+
+  The CPG may also provide a Clock Domain for SoC devices, in combination with
+  the CPG Module Stop (MSTP) Clocks.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r8a73a4-cpg-clocks     # R-Mobile APE6
+      - const: renesas,r8a7740-cpg-clocks     # R-Mobile A1
+      - const: renesas,r8a7778-cpg-clocks     # R-Car M1
+      - const: renesas,r8a7779-cpg-clocks     # R-Car H1
+      - items:
+          - enum:
+              - renesas,r7s72100-cpg-clocks   # RZ/A1H
+          - const: renesas,rz-cpg-clocks      # RZ/A1
+      - const: renesas,sh73a0-cpg-clocks      # SH-Mobile AG5
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  '#clock-cells':
+    const: 1
+
+  clock-output-names: true
+
+  renesas,mode:
+    description: Board-specific settings of the MD_CK* bits on R-Mobile A1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  '#power-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-output-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a73a4-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+
+        clock-output-names:
+          items:
+            - const: main
+            - const: pll0
+            - const: pll1
+            - const: pll2
+            - const: pll2s
+            - const: pll2h
+            - const: z
+            - const: z2
+            - const: i
+            - const: m3
+            - const: b
+            - const: m1
+            - const: m2
+            - const: zx
+            - const: zs
+            - const: hp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7740-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+            - description: extalr
+
+        clock-output-names:
+          items:
+            - const: system
+            - const: pllc0
+            - const: pllc1
+            - const: pllc2
+            - const: r
+            - const: usb24s
+            - const: i
+            - const: zg
+            - const: b
+            - const: m1
+            - const: hp
+            - const: hpp
+            - const: usbp
+            - const: s
+            - const: zb
+            - const: m3
+            - const: cp
+
+      required:
+        - renesas,mode
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7778-cpg-clocks
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-output-names:
+          items:
+            - const: plla
+            - const: pllb
+            - const: b
+            - const: out
+            - const: p
+            - const: s
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7779-cpg-clocks
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-output-names:
+          items:
+            - const: plla
+            - const: z
+            - const: zs
+            - const: s
+            - const: s1
+            - const: p
+            - const: b
+            - const: out
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r7s72100-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: usb_x1
+
+        clock-output-names:
+          items:
+            - const: pll
+            - const: i
+            - const: g
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,sh73a0-cpg-clocks
+    then:
+      properties:
+        clocks:
+          items:
+            - description: extal1
+            - description: extal2
+
+        clock-output-names:
+          items:
+            - const: main
+            - const: pll0
+            - const: pll1
+            - const: pll2
+            - const: pll3
+            - const: dsi0phy
+            - const: dsi1phy
+            - const: zg
+            - const: m3
+            - const: b
+            - const: m1
+            - const: m2
+            - const: z
+            - const: zx
+            - const: hp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a7778-cpg-clocks
+              - renesas,r8a7779-cpg-clocks
+              - renesas,rz-cpg-clocks
+    then:
+      required:
+        - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a7740-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "system", "pllc0", "pllc1", "pllc2", "r",
+                                 "usb24s", "i", "zg", "b", "m1", "hp", "hpp",
+                                 "usbp", "s", "zb", "m3", "cp";
+            renesas,mode = <0x05>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
new file mode 100644
index 0000000000..2197c952e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-div6-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas CPG DIV6 Clock
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+  Generator (CPG). Their clock input is divided by a configurable factor from 1
+  to 64.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a73a4-div6-clock # R-Mobile APE6
+          - renesas,r8a7740-div6-clock # R-Mobile A1
+          - renesas,sh73a0-div6-clock  # SH-Mobile AG5
+      - const: renesas,cpg-div6-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+      - maxItems: 8
+    description:
+      For clocks with multiple parents, invalid settings must be specified as
+      "<0>".
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
+    sdhi2_clk: sdhi2_clk@e615007c {
+            compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+            reg = <0xe615007c 4>;
+            clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>, <0>,
+                     <&extal2_clk>;
+            #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
new file mode 100644
index 0000000000..9c3dc6c4fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+  and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+  and share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The MSSR block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s9210-cpg-mssr  # RZ/A2
+      - renesas,r8a7742-cpg-mssr  # RZ/G1H
+      - renesas,r8a7743-cpg-mssr  # RZ/G1M
+      - renesas,r8a7744-cpg-mssr  # RZ/G1N
+      - renesas,r8a7745-cpg-mssr  # RZ/G1E
+      - renesas,r8a77470-cpg-mssr # RZ/G1C
+      - renesas,r8a774a1-cpg-mssr # RZ/G2M
+      - renesas,r8a774b1-cpg-mssr # RZ/G2N
+      - renesas,r8a774c0-cpg-mssr # RZ/G2E
+      - renesas,r8a774e1-cpg-mssr # RZ/G2H
+      - renesas,r8a7790-cpg-mssr  # R-Car H2
+      - renesas,r8a7791-cpg-mssr  # R-Car M2-W
+      - renesas,r8a7792-cpg-mssr  # R-Car V2H
+      - renesas,r8a7793-cpg-mssr  # R-Car M2-N
+      - renesas,r8a7794-cpg-mssr  # R-Car E2
+      - renesas,r8a7795-cpg-mssr  # R-Car H3
+      - renesas,r8a7796-cpg-mssr  # R-Car M3-W
+      - renesas,r8a77961-cpg-mssr # R-Car M3-W+
+      - renesas,r8a77965-cpg-mssr # R-Car M3-N
+      - renesas,r8a77970-cpg-mssr # R-Car V3M
+      - renesas,r8a77980-cpg-mssr # R-Car V3H
+      - renesas,r8a77990-cpg-mssr # R-Car E3
+      - renesas,r8a77995-cpg-mssr # R-Car D3
+      - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - extal     # All
+        - extalr    # Most R-Car Gen3 and RZ/G2
+        - usb_extal # Most R-Car Gen2 and RZ/G1
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/*-cpg-mssr.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the datasheet.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/MSSR Clock Domain and can be
+      power-managed through Module Standby should refer to the CPG device node
+      in their "power-domains" property, as documented by the generic PM Domain
+      bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the datasheet.
+    const: 1
+
+if:
+  not:
+    properties:
+      compatible:
+        items:
+          enum:
+            - renesas,r7s9210-cpg-mssr
+then:
+  required:
+    - '#reset-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@e6150000 {
+            compatible = "renesas,r8a7795-cpg-mssr";
+            reg = <0xe6150000 0x1000>;
+            clocks = <&extal_clk>, <&extalr_clk>;
+            clock-names = "extal", "extalr";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml
new file mode 100644
index 0000000000..9752ac6328
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mstp-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Clock Pulse Generator (CPG) Module Stop (MSTP) Clocks
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Clock Pulse Generator (CPG) can gate SoC device clocks. The gates are
+  organized in groups of up to 32 gates.
+
+  This device tree binding describes a single 32 gate clocks group per node.
+  Clocks are referenced by user nodes by the Module Stop (MSTP) node phandle
+  and the clock index in the group, from 0 to 31.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-mstp-clocks # RZ/A1
+          - renesas,r8a73a4-mstp-clocks  # R-Mobile APE6
+          - renesas,r8a7740-mstp-clocks  # R-Mobile A1
+          - renesas,r8a7778-mstp-clocks  # R-Car M1
+          - renesas,r8a7779-mstp-clocks  # R-Car H1
+          - renesas,sh73a0-mstp-clocks   # SH-Mobile AG5
+      - const: renesas,cpg-mstp-clocks
+
+  reg:
+    minItems: 1
+    items:
+      - description: Module Stop Control Register (MSTPCR)
+      - description: Module Stop Status Register (MSTPSR)
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  '#clock-cells':
+    const: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 32
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    mstp2_clks: mstp2_clks@e6150138 {
+            compatible = "renesas,r8a73a4-mstp-clocks",
+                         "renesas,cpg-mstp-clocks";
+            reg = <0xe6150138 4>, <0xe6150040 4>;
+            clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+                     <&mp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+            #clock-cells = <1>;
+            clock-indices = <
+                    R8A73A4_CLK_SCIFA0 R8A73A4_CLK_SCIFA1
+                    R8A73A4_CLK_SCIFB0 R8A73A4_CLK_SCIFB1
+                    R8A73A4_CLK_SCIFB2 R8A73A4_CLK_SCIFB3
+                    R8A73A4_CLK_DMAC
+            >;
+            clock-output-names =
+                    "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifb3",
+                    "dmac";
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml
new file mode 100644
index 0000000000..4d9a648004
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,emev2-smu.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,emev2-smu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 System Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The System Management Unit is described in user's manual R19UH0037EJ1000_SMU.
+  This is not a clock provider, but clocks under SMU depend on it.
+
+properties:
+  compatible:
+    const: renesas,emev2-smu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  ".*sclkdiv@.*":
+    type: object
+
+    description: |
+      Function block with an input mux and a divider, which corresponds to
+      "Serial clock generator" in fig. "Clock System Overview" of the manual,
+      and "xxx frequency division setting register" (XXXCLKDIV) registers.
+      This makes internal (neither input nor output) clock that is provided
+      to input of xxxGCLK block.
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-clkdiv
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        minItems: 1
+        maxItems: 4
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  ".*sclk@.*":
+    type: object
+
+    description: |
+      Clock gating node shown as "Clock stop processing block" in the
+      fig. "Clock System Overview" of the manual.
+      Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+    properties:
+      compatible:
+        const: renesas,emev2-smu-gclk
+
+      reg:
+        maxItems: 1
+        description:
+          Byte offset from SMU base and Bit position in the register.
+
+      clocks:
+        maxItems: 1
+
+      '#clock-cells':
+        const: 0
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - '#clock-cells'
+
+    additionalProperties: false
+
+additionalProperties: true
+
+examples:
+  - |
+    // Example of clock-tree description:
+    //
+    //  This describes a clock path in the clock tree
+    //   c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+    clocks@e0110000 {
+            compatible = "renesas,emev2-smu";
+            reg = <0xe0110000 0x10000>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            c32ki: c32ki {
+                    compatible = "fixed-clock";
+                    clock-frequency = <32768>;
+                    #clock-cells = <0>;
+            };
+            pll3_fo: pll3_fo {
+                    compatible = "fixed-factor-clock";
+                    clocks = <&c32ki>;
+                    clock-div = <1>;
+                    clock-mult = <7000>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
+                    compatible = "renesas,emev2-smu-clkdiv";
+                    reg = <0x610 0>;
+                    clocks = <&pll3_fo>;
+                    #clock-cells = <0>;
+            };
+            usia_u0_sclk: usia_u0_sclk@4a0,1 {
+                    compatible = "renesas,emev2-smu-gclk";
+                    reg = <0x4a0 1>;
+                    clocks = <&usia_u0_sclkdiv>;
+                    #clock-cells = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
new file mode 100644
index 0000000000..26d94cedc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,r9a06g032-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1D (R9A06G032) System Controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    const: renesas,r9a06g032-sysctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: External 40 MHz crystal
+      - description: Optional external 32.768 kHz crystal
+      - description: Optional external JTAG input
+      - description: Optional external RGMII_REFCLK
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mclk
+      - const: rtc
+      - const: jtag
+      - const: rgmii_ref_ext
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/dma/renesas,rzn1-dmamux.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl: system-controller@4000c000 {
+            compatible = "renesas,r9a06g032-sysctrl";
+            reg = <0x4000c000 0x1000>;
+            clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>,
+                     <&ext_rgmii_ref>;
+            clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+            #clock-cells = <1>;
+            #power-domain-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
new file mode 100644
index 0000000000..c84f29f181
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car USB 2.0 clock selector
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  If you connect an external clock to the USB_EXTAL pin only, you should set
+  the clock rate to "usb_extal" node only.
+  If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+  is not needed because this is default setting. (Of course, you can set the
+  clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+  Case 1: An external clock connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |External  |---|USB_EXTAL ---> all usb channels|
+    |clock     |   |USB_XTAL                       |
+    +----------+   +-------------------------------+
+
+  In this case, we need this driver with "usb_extal" clock.
+
+  Case 2: An oscillator connects to R-Car SoC
+    +----------+   +--- R-Car ---------------------+
+    |Oscillator|---|USB_EXTAL -+-> all usb channels|
+    |          |---|USB_XTAL --+                   |
+    +----------+   +-------------------------------+
+  In this case, we don't need this selector.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-rcar-usb2-clock-sel # RZ/G2M
+          - renesas,r8a774b1-rcar-usb2-clock-sel # RZ/G2N
+          - renesas,r8a774e1-rcar-usb2-clock-sel # RZ/G2H
+          - renesas,r8a7795-rcar-usb2-clock-sel  # R-Car H3
+          - renesas,r8a7796-rcar-usb2-clock-sel  # R-Car M3-W
+          - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+
+      - const: renesas,rcar-gen3-usb2-clock-sel
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+      - const: usb_extal
+      - const: usb_xtal
+
+  '#clock-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ehci_ohci
+      - const: hs-usb-if
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - power-domains
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb2_clksel: clock-controller@e6590630 {
+        compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
+                     "renesas,rcar-gen3-usb2-clock-sel";
+        reg = <0xe6590630 0x02>;
+        clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+                 <&usb_extal>, <&usb_xtal>;
+        clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
+        #clock-cells = <0>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 703>, <&cpg 704>;
+        reset-names = "ehci_ohci", "hs-usb-if";
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
new file mode 100644
index 0000000000..fe2fba18ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The Module Standby Mode block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a09g011-cpg # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Clock source to CPG can be either from external clock input (EXCLK) or
+      crystal oscillator (XIN/XOUT).
+    const: extal
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/r9a0*-cpg.h>,
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+      can be power-managed through Module Standby should refer to the CPG device
+      node in their "power-domains" property, as documented by the generic PM
+      Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      <dt-bindings/clock/r9a0*-cpg.h>.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@11010000 {
+            compatible = "renesas,r9a07g044-cpg";
+            reg = <0x11010000 0x10000>;
+            clocks = <&extal_clk>;
+            clock-names = "extal";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
new file mode 100644
index 0000000000..b339f1f9f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 0000000000..0f0f64b6f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 0000000000..ba5b454643
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 0000000000..b3d9c8eca9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 0000000000..ddd7e46af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 0000000000..1050fff72a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 0000000000..6655e97d52
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 0000000000..fec37f5b80
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
new file mode 100644
index 0000000000..904ae682ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3328 Clock and Reset Unit
+
+The RK3328 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3328-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "clkin_i2s" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+ - "hdmi_phy" - output clock of the hdmi phy pll - optional
+
+Example: Clock controller node:
+
+	cru: clock-controller@ff440000 {
+		compatible = "rockchip,rk3328-cru";
+		reg = <0x0 0xff440000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@ff120000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0xff120000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 0000000000..90af242b41
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
new file mode 100644
index 0000000000..0b758e015e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 Clock and Reset Unit
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3399 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
+    - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
+    - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-pmucru
+      - rockchip,rk3399-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pmucru: clock-controller@ff750000 {
+      compatible = "rockchip,rk3399-pmucru";
+      reg = <0xff750000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3399-cru";
+      reg = <0xff760000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
new file mode 100644
index 0000000000..f809c28944
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROCKCHIP rk3568 Family Clock Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3568 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+  (examples: provide SCLK_UART1\PCLK_UART1 and SRST_P_UART1\SRST_S_UART1 for UART module)
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be
+  used in device tree sources.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-cru
+      - rockchip,rk3568-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    pmucru: clock-controller@fdd00000 {
+      compatible = "rockchip,rk3568-pmucru";
+      reg = <0xfdd00000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+  - |
+    cru: clock-controller@fdd20000 {
+      compatible = "rockchip,rk3568-cru";
+      reg = <0xfdd20000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml
new file mode 100644
index 0000000000..74cd3f3f22
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3588-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3588 Family Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3588 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clock and reset IDs
+  are defined as preprocessor macros in dt-binding headers.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@fd7c0000 {
+      compatible = "rockchip,rk3588-cru";
+      reg = <0xfd7c0000 0x5c000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 0000000000..4611d920b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
new file mode 100644
index 0000000000..0998f8b922
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
new file mode 100644
index 0000000000..d819dfaaff
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos-audss-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-audss-clock
+      - samsung,exynos5250-audss-clock
+      - samsung,exynos5410-audss-clock
+      - samsung,exynos5420-audss-clock
+
+  clocks:
+    minItems: 2
+    items:
+      - description:
+          Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is
+          used if not specified.
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is
+          used if not specified.
+      - description:
+          Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not
+          specified.
+      - description:
+          PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not specified.
+      - description:
+          External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+          specified.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll_ref
+      - const: pll_in
+      - const: sclk_audio
+      - const: sclk_pcm_in
+      - const: cdclk
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3810000 {
+        compatible = "samsung,exynos5250-audss-clock";
+        reg = <0x03810000 0x0c>;
+        #clock-cells = <1>;
+        clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>;
+        clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
new file mode 100644
index 0000000000..a36781a455
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/ headers.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-cmu
+          - samsung,exynos3250-cmu-dmc
+          - samsung,exynos3250-cmu-isp
+          - samsung,exynos4210-clock
+          - samsung,exynos4212-clock
+          - samsung,exynos4412-clock
+          - samsung,exynos5250-clock
+      - items:
+          - enum:
+              - samsung,exynos5420-clock
+              - samsung,exynos5800-clock
+          - const: syscon
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    clock: clock-controller@10010000 {
+        compatible = "samsung,exynos5250-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
new file mode 100644
index 0000000000..c98eff64f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-ext-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC external/osc/XXTI/XusbXTI clock
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Samsung SoCs require an external clock supplied through XXTI or XusbXTI pins.
+
+properties:
+  compatible:
+    enum:
+      - samsung,clock-xxti
+      - samsung,clock-xusbxti
+      - samsung,exynos5420-oscclk
+
+  "#clock-cells":
+    const: 0
+
+  clock-frequency: true
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    fixed-rate-clocks {
+        clock {
+            compatible = "samsung,clock-xxti";
+            clock-frequency = <24000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
new file mode 100644
index 0000000000..bee13436d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos4412-isp-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4412 SoC ISP clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Clock controller for Samsung Exynos4412 SoC FIMC-ISP (Camera ISP)
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/ headers.
+
+properties:
+  compatible:
+    const: samsung,exynos4412-isp-clock
+
+  clocks:
+    items:
+      - description: CLK_ACLK200 from the main clock controller
+      - description: CLK_ACLK400_MCUISP from the main clock controller
+
+  clock-names:
+    items:
+      - const: aclk200
+      - const: aclk400_mcuisp
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    clock-controller@10048000 {
+        compatible = "samsung,exynos4412-isp-clock";
+        reg = <0x10048000 0x1000>;
+        #clock-cells = <1>;
+        power-domains = <&pd_isp>;
+        clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
+        clock-names = "aclk200", "aclk400_mcuisp";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 0000000000..b05f83533e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 0000000000..b737c9d35a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 0000000000..3f9326e09f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 0000000000..c137c6744e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 0000000000..006d33a9e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
new file mode 100644
index 0000000000..c752c8985a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -0,0 +1,311 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos850 SoC clock controller
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos850 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+  clocks must be defined as fixed-rate clocks in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos850.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-aud
+      - samsung,exynos850-cmu-cmgp
+      - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-dpu
+      - samsung,exynos850-cmu-g3d
+      - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-is
+      - samsung,exynos850-cmu-mfcmscl
+      - samsung,exynos850-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-aud
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: AUD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_aud
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: eMMC clock (from CMU_TOP)
+            - description: SSS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_mmc_embd
+            - const: dout_core_sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-dpu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_dpu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-g3d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_g3d_switch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-hsi
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI bus clock (from CMU_TOP)
+            - description: SD card clock (from CMU_TOP)
+            - description: USB 2.0 DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: dout_hsi_bus
+            - const: dout_hsi_mmc_card
+            - const: dout_hsi_usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-is
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_IS bus clock (from CMU_TOP)
+            - description: Image Texture Processing core clock (from CMU_TOP)
+            - description: Visual Recognition Accelerator clock (from CMU_TOP)
+            - description: Geometric Distortion Correction clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_is_bus
+            - const: dout_is_itp
+            - const: dout_is_vra
+            - const: dout_is_gdc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-mfcmscl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Multi-Format Codec clock (from CMU_TOP)
+            - description: Memory to Memory Scaler clock (from CMU_TOP)
+            - description: Multi-Channel Scaler clock (from CMU_TOP)
+            - description: JPEG codec clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_mfcmscl_mfc
+            - const: dout_mfcmscl_m2m
+            - const: dout_mfcmscl_mcsc
+            - const: dout_mfcmscl_jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: UART clock (from CMU_TOP)
+            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_uart
+            - const: dout_peri_ip
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+
+    cmu_peri: clock-controller@10030000 {
+        compatible = "samsung,exynos850-cmu-peri";
+        reg = <0x10030000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_UART>,
+                 <&cmu_top CLK_DOUT_PERI_IP>;
+        clock-names = "oscclk", "dout_peri_bus",
+                      "dout_peri_uart", "dout_peri_ip";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 0000000000..55c4f94a14
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-fsys0
+      - samsung,exynosautov9-cmu-fsys1
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 bus clock (from CMU_TOP)
+            - description: CMU_FSYS0 pcie clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys0_bus
+            - const: dout_clkcmu_fsys0_pcie
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 bus clock (from CMU_TOP)
+            - description: CMU_FSYS1 mmc card clock (from CMU_TOP)
+            - description: CMU_FSYS1 usb clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys1_bus
+            - const: gout_clkcmu_fsys1_mmc_card
+            - const: dout_clkcmu_fsys1_usbdrd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
new file mode 100644
index 0000000000..d5296e6053
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2M and S5M family clock generator block
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+  outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/samsung,s2mps11.h header.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-clk
+      - samsung,s2mps13-clk # S2MPS13 and S2MPS15
+      - samsung,s2mps14-clk
+      - samsung,s5m8767-clk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 3
+    description: Names for AP, CP and BT clocks.
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
new file mode 100644
index 0000000000..872ee8e0f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt
@@ -0,0 +1,76 @@
+* Samsung S3C64xx Clock Controller
+
+The S3C64xx clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the S3C64xx family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
+  - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular S3C64xx SoC and this is specified where applicable.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "fin_pll" - PLL input clock (xtal/extclk) - required,
+ - "xusbxti" - USB xtal - required,
+ - "iiscdclk0" - I2S0 codec clock - optional,
+ - "iiscdclk1" - I2S1 codec clock - optional,
+ - "iiscdclk2" - I2S2 codec clock - optional,
+ - "pcmcdclk0" - PCM0 codec clock - optional,
+ - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	fin_pll: clock-fin-pll {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		clock-frequency = <12000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clock SCLK_UART>;
+		};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
new file mode 100644
index 0000000000..2659854ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210-audss.h header.
+
+properties:
+  compatible:
+    const: samsung,s5pv210-audss-clock
+
+  clocks:
+    minItems: 4
+    items:
+      - description:
+          AHB bus clock of the Audio Subsystem.
+      - description:
+          Optional fixed rate PLL reference clock, parent of mout_audss. If not
+          specified (i.e. xusbxti is used for PLL reference), it is fixed to a
+          clock named "xxti".
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss.
+      - description:
+          Audio bus clock, parent of mout_i2s.
+      - description:
+          Optional external i2s clock, parent of mout_i2s. If not specified, it
+          is fixed to a clock named "iiscdclk0".
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: hclk
+      - const: xxti
+      - const: fout_epll
+      - const: sclk_audio0
+      - const: iiscdclk0
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    clock-controller@c0900000 {
+        compatible = "samsung,s5pv210-audss-clock";
+        reg = <0xc0900000 0x1000>;
+        #clock-cells = <1>;
+        clock-names = "hclk", "xxti", "fout_epll", "sclk_audio0";
+        clocks = <&clocks DOUT_HCLKP>, <&xxti>, <&clocks FOUT_EPLL>,
+                 <&clocks SCLK_AUDIO0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 0000000000..67a33665cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
new file mode 100644
index 0000000000..c79e752283
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu540-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU540 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu540-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu540-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
new file mode 100644
index 0000000000..252085a0cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sifive/fu740-prci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 Power Reset Clock Interrupt Controller (PRCI)
+
+maintainers:
+  - Zong Li <zong.li@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+
+description:
+  On the FU740 family of SoCs, most system-wide clock and reset integration
+  is via the PRCI IP block.
+  The clock consumer should specify the desired clock via the clock ID
+  macros defined in include/dt-bindings/clock/sifive-fu740-prci.h.
+  These macros begin with PRCI_CLK_.
+
+  The hfclk and rtcclk nodes are required, and represent physical
+  crystals or resonators located on the PCB.  These nodes should be present
+  underneath /, rather than /soc.
+
+properties:
+  compatible:
+    const: sifive,fu740-c000-prci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: high frequency clock.
+      - description: RTL clock.
+
+  clock-names:
+    items:
+      - const: hfclk
+      - const: rtcclk
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    prci: clock-controller@10000000 {
+      compatible = "sifive,fu740-c000-prci";
+      reg = <0x10000000 0x1000>;
+      clocks = <&hfclk>, <&rtcclk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si514.txt b/Documentation/devicetree/bindings/clock/silabs,si514.txt
new file mode 100644
index 0000000000..a4f28ec86f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si514.txt
@@ -0,0 +1,24 @@
+Binding for Silicon Labs 514 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si514 datasheet
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
+
+Required properties:
+ - compatible: Shall be "silabs,si514"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si514".
+
+Example:
+	si514: clock-generator@55 {
+		reg = <0x55>;
+		#clock-cells = <0>;
+		compatible = "silabs,si514";
+	};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
new file mode 100644
index 0000000000..ce55aba0ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt
@@ -0,0 +1,175 @@
+Binding for Silicon Labs Si5340, Si5341 Si5342, Si5344 and Si5345 programmable
+i2c clock generator.
+
+Reference
+[1] Si5341 Data Sheet
+    https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf
+[2] Si5341 Reference Manual
+    https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf
+[3] Si5345 Reference Manual
+    https://www.silabs.com/documents/public/reference-manuals/Si5345-44-42-D-RM.pdf
+
+The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output
+clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which
+in turn can be directed to any of the 10 (or 4) outputs through a divider.
+The internal structure of the clock generators can be found in [2].
+The Si5345 is similar to the Si5341 with the addition of fractional input
+dividers and automatic input selection, as described in [3].
+The Si5342 and Si5344 are smaller versions of the Si5345, with 2 or 4 outputs.
+
+The driver can be used in "as is" mode, reading the current settings from the
+chip at boot, in case you have a (pre-)programmed device. If the PLL is not
+configured when the driver probes, it assumes the driver must fully initialize
+it.
+
+The device type, speed grade and revision are determined runtime by probing.
+
+The driver currently does not support any fancy input configurations. They can
+still be programmed into the chip and the driver will leave them "as is".
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+	"silabs,si5340" - Si5340 A/B/C/D
+	"silabs,si5341" - Si5341 A/B/C/D
+	"silabs,si5342" - Si5342 A/B/C/D
+	"silabs,si5344" - Si5344 A/B/C/D
+	"silabs,si5345" - Si5345 A/B/C/D
+- reg: i2c device address, usually 0x74
+- #clock-cells: from common clock binding; shall be set to 2.
+	The first value is "0" for outputs, "1" for synthesizers.
+	The second value is the output or synthesizer index.
+- clocks: from common clock binding; list of parent clock  handles,
+	corresponding to inputs. Use a fixed clock for the "xtal" input.
+	At least one must be present.
+- clock-names: One of: "xtal", "in0", "in1", "in2"
+
+Optional properties:
+- vdd-supply: Regulator node for VDD
+- vdda-supply: Regulator node for VDDA
+- vdds-supply: Regulator node for VDDS
+- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL
+  feedback divider. Must be such that the PLL output is in the valid range. For
+  example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only
+  the fraction matters, using 3500 and 12 will deliver the exact same result.
+  If these are not specified, and the PLL is not yet programmed when the driver
+  probes, the PLL will be set to 14GHz.
+- silabs,reprogram: When present, the driver will always assume the device must
+  be initialized, and always performs the soft-reset routine. Since this will
+  temporarily stop all output clocks, don't do this if the chip is generating
+  the CPU clock for example.
+- silabs,xaxb-ext-clk: When present, indicates that the XA/XB pins are used
+  in EXTCLK (external reference clock) rather than XTAL (crystal) mode.
+- interrupts: Interrupt for INTRb pin.
+- silabs,iovdd-33: When present, indicates that the I2C lines are using 3.3V
+  rather than 1.8V thresholds.
+- vddoX-supply (where X is an output index): Regulator node for VDDO for the
+  specified output. The driver selects the output VDD_SEL setting based on this
+  voltage.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+
+== Child nodes: Outputs ==
+
+The child nodes list the output clocks.
+
+Each of the clock outputs can be overwritten individually by using a child node.
+If a child node for a clock output is not set, the configuration remains
+unchanged.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,format: Output format, one of:
+	1 = differential (defaults to LVDS levels)
+	2 = low-power (defaults to HCSL levels)
+	4 = LVCMOS
+- silabs,common-mode: Manually override output common mode, see [2] for values
+- silabs,amplitude: Manually override output amplitude, see [2] for values
+- silabs,synth-master: boolean. If present, this output is allowed to change the
+	multisynth frequency dynamically.
+- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH
+	when disabled, otherwise it's driven LOW.
+
+==Example==
+
+/* 48MHz reference crystal */
+ref48: ref48M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <48000000>;
+};
+
+i2c-master-node {
+	/* Programmable clock (for logic) */
+	si5341: clock-generator@74 {
+		reg = <0x74>;
+		compatible = "silabs,si5341";
+		#clock-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&ref48>;
+		clock-names = "xtal";
+
+		silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */
+		silabs,pll-m-den = <48>;
+		silabs,reprogram; /* Chips are not programmed, always reset */
+
+		out@0 {
+			reg = <0>;
+			silabs,format = <1>; /* LVDS 3v3 */
+			silabs,common-mode = <3>;
+			silabs,amplitude = <3>;
+			silabs,synth-master;
+		};
+
+		/*
+		 * Output 6 configuration:
+		 *  LVDS 1v8
+		 */
+		out@6 {
+			reg = <6>;
+			silabs,format = <1>; /* LVDS 1v8 */
+			silabs,common-mode = <13>;
+			silabs,amplitude = <3>;
+		};
+
+		/*
+		 * Output 8 configuration:
+		 *  HCSL 3v3
+		 */
+		out@8 {
+			reg = <8>;
+			silabs,format = <2>;
+			silabs,common-mode = <11>;
+			silabs,amplitude = <3>;
+		};
+	};
+};
+
+some-video-node {
+	/* Standard clock bindings */
+	clock-names = "pixel";
+	clocks = <&si5341 0 7>; /* Output 7 */
+
+	/* Set output 7 to use syntesizer 3 as its parent */
+	assigned-clocks = <&si5341 0 7>, <&si5341 1 3>;
+	assigned-clock-parents = <&si5341 1 3>;
+	/* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */
+	assigned-clock-rates = <148500000>, <594000000>;
+};
+
+some-audio-node {
+	clock-names = "i2s-clk";
+	clocks = <&si5341 0 0>;
+	/*
+	 * since output 0 is a synth-master, the synth will be automatically set
+	 * to an appropriate frequency when the audio driver requests another
+	 * frequency. We give control over synth 2 to this output here.
+	 */
+	assigned-clocks = <&si5341 0 0>;
+	assigned-clock-parents = <&si5341 1 2>;
+};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
new file mode 100644
index 0000000000..bfda6af76b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -0,0 +1,126 @@
+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with up to 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of the following:
+	"silabs,si5351a" - Si5351a, QFN20 package
+	"silabs,si5351a-msop" - Si5351a, MSOP10 package
+	"silabs,si5351b" - Si5351b, QFN20 package
+	"silabs,si5351c" - Si5351c, QFN20 package
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be xtal reference clock or xtal and clkin for
+  si5351c only. Corresponding clock input names are "xtal" and
+  "clkin" respectively.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+  to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+  0 = multisynth N
+  1 = multisynth 0 for output clocks 0-3, else multisynth4
+  2 = xtal
+  3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+  divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+- silabs,pll-reset: boolean, clock output can reset its pll.
+- silabs,disable-state : clock output disable state, shall be
+  0 = clock output is driven LOW when disabled
+  1 = clock output is driven HIGH when disabled
+  2 = clock output is FLOATING (HIGH-Z) when disabled
+  3 = clock output is NEVER disabled
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+	/* Si5351a msop10 i2c clock generator */
+	si5351a: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+		clock-names = "xtal";
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		/*
+		 * overwrite clkout0 configuration with:
+		 * - 8mA output drive strength
+		 * - pll0 as clock source of multisynth0
+		 * - multisynth0 as clock source of output divider
+		 * - multisynth0 can change pll0
+		 * - set initial clock frequency of 74.25MHz
+		 */
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+			clock-frequency = <74250000>;
+		};
+
+		/*
+		 * overwrite clkout1 configuration with:
+		 * - 4mA output drive strength
+		 * - pll1 as clock source of multisynth1
+		 * - multisynth1 as clock source of output divider
+		 * - multisynth1 can change pll1
+		 */
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <4>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			pll-master;
+		};
+
+		/*
+		 * overwrite clkout2 configuration with:
+		 * - xtal as clock source of output divider
+		 */
+		clkout2 {
+			reg = <2>;
+			silabs,clock-source = <2>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.txt b/Documentation/devicetree/bindings/clock/silabs,si544.txt
new file mode 100644
index 0000000000..b86535b809
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si544.txt
@@ -0,0 +1,25 @@
+Binding for Silicon Labs 544 programmable I2C clock generator.
+
+Reference
+This binding uses the common clock binding[1]. Details about the device can be
+found in the datasheet[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si544 datasheet
+    https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf
+
+Required properties:
+ - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according
+               to the speed grade of the chip.
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si544".
+
+Example:
+	si544: clock-controller@55 {
+		reg = <0x55>;
+		#clock-cells = <0>;
+		compatible = "silabs,si544b";
+	};
diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
new file mode 100644
index 0000000000..5dda17df1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
@@ -0,0 +1,41 @@
+Binding for Silicon Labs 570, 571, 598 and 599 programmable
+I2C clock generators.
+
+Reference
+This binding uses the common clock binding[1]. Details about the devices can be
+found in the data sheets[2][3].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si570/571 Data Sheet
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+[3] Si598/599 Data Sheet
+    https://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+
+Required properties:
+ - compatible: Shall be one of "silabs,si570", "silabs,si571",
+			       "silabs,si598", "silabs,si599"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+ - factory-fout: Factory set default frequency. This frequency is part specific.
+		 The correct frequency for the part used has to be provided in
+		 order to generate the correct output frequencies. For more
+		 details, please refer to the data sheet.
+ - temperature-stability: Temperature stability of the device in PPM. Should be
+			  one of: 7, 20, 50 or 100.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si570".
+ - clock-frequency: Output frequency to generate. This defines the output
+		    frequency set during boot. It can be reprogrammed during
+		    runtime through the common clock framework.
+ - silabs,skip-recall: Do not perform NVM->RAM recall operation. It will rely
+		       on hardware loading of RAM from NVM at power on.
+
+Example:
+	si570: clock-generator@5d {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x5d>;
+		factory-fout = <156250000>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
new file mode 100644
index 0000000000..9e35e0e51c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/skyworks,si521xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Si521xx I2C PCIe clock generators
+
+description: |
+  The Skyworks Si521xx are I2C PCIe clock generators providing
+  from 4 to 9 output clocks.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - skyworks,si52144
+      - skyworks,si52146
+      - skyworks,si52147
+
+  reg:
+    const: 0x6b
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  skyworks,out-amplitude-microvolt:
+    enum: [ 300000, 400000, 500000, 600000, 700000, 800000, 900000, 1000000 ]
+    description: Output clock signal amplitude
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@6b {
+            compatible = "skyworks,si52144";
+            reg = <0x6b>;
+            #clock-cells = <1>;
+            clocks = <&ref25m>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
new file mode 100644
index 0000000000..c56c7553c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the HSDK Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+  "snps,hsdk-core-pll-clock"
+  "snps,hsdk-gp-pll-clock"
+  "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input_clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	cpu_clk: cpu-clk@0 {
+		compatible = "snps,hsdk-core-pll-clock";
+		reg = <0x00 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
new file mode 100644
index 0000000000..11fe487661
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
@@ -0,0 +1,28 @@
+Binding for the AXS10X Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-<name>-pll-clock"
+  "snps,axs10x-arc-pll-clock"
+  "snps,axs10x-pgu-pll-clock"
+- reg: should always contain 2 pairs address - length: first for PLL config
+registers and second for corresponding LOCK CGU register.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input-clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	core-clk: core-clk@80 {
+		compatible = "snps,axs10x-arc-pll-clock";
+		reg = <0x80 0x10>, <0x100 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input-clk>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
new file mode 100644
index 0000000000..4e82582fb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/socionext,uniphier-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier clock controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System clock
+        enum:
+          - socionext,uniphier-ld4-clock
+          - socionext,uniphier-pro4-clock
+          - socionext,uniphier-sld8-clock
+          - socionext,uniphier-pro5-clock
+          - socionext,uniphier-pxs2-clock
+          - socionext,uniphier-ld6b-clock
+          - socionext,uniphier-ld11-clock
+          - socionext,uniphier-ld20-clock
+          - socionext,uniphier-pxs3-clock
+          - socionext,uniphier-nx1-clock
+      - description: Media I/O (MIO) clock, SD clock
+        enum:
+          - socionext,uniphier-ld4-mio-clock
+          - socionext,uniphier-pro4-mio-clock
+          - socionext,uniphier-sld8-mio-clock
+          - socionext,uniphier-pro5-sd-clock
+          - socionext,uniphier-pxs2-sd-clock
+          - socionext,uniphier-ld11-mio-clock
+          - socionext,uniphier-ld20-sd-clock
+          - socionext,uniphier-pxs3-sd-clock
+          - socionext,uniphier-nx1-sd-clock
+      - description: Peripheral clock
+        enum:
+          - socionext,uniphier-ld4-peri-clock
+          - socionext,uniphier-pro4-peri-clock
+          - socionext,uniphier-sld8-peri-clock
+          - socionext,uniphier-pro5-peri-clock
+          - socionext,uniphier-pxs2-peri-clock
+          - socionext,uniphier-ld11-peri-clock
+          - socionext,uniphier-ld20-peri-clock
+          - socionext,uniphier-pxs3-peri-clock
+          - socionext,uniphier-nx1-peri-clock
+      - description: SoC-glue clock
+        enum:
+          - socionext,uniphier-pro4-sg-clock
+
+  "#clock-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+
+examples:
+  - |
+    clock-controller {
+        compatible = "socionext,uniphier-ld11-clock";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
new file mode 100644
index 0000000000..aaaf02ca2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.txt
@@ -0,0 +1,63 @@
+Spreadtrum SC9860 Clock Binding
+------------------------
+
+Required properties:
+- compatible: should contain the following compatible strings:
+	- "sprd,sc9860-pmu-gate"
+	- "sprd,sc9860-pll"
+	- "sprd,sc9860-ap-clk"
+	- "sprd,sc9860-aon-prediv"
+	- "sprd,sc9860-apahb-gate"
+	- "sprd,sc9860-aon-gate"
+	- "sprd,sc9860-aonsecure-clk"
+	- "sprd,sc9860-agcp-gate"
+	- "sprd,sc9860-gpu-clk"
+	- "sprd,sc9860-vsp-clk"
+	- "sprd,sc9860-vsp-gate"
+	- "sprd,sc9860-cam-clk"
+	- "sprd,sc9860-cam-gate"
+	- "sprd,sc9860-disp-clk"
+	- "sprd,sc9860-disp-gate"
+	- "sprd,sc9860-apapb-gate"
+
+- #clock-cells: must be 1
+
+- clocks : Should be the input parent clock(s) phandle for the clock, this
+	   property here just simply shows which clock group the clocks'
+	   parents are in, since each clk node would represent many clocks
+	   which are defined in the driver.  The detailed dependency
+	   relationship (i.e. how many parents and which are the parents)
+	   are implemented in driver code.
+
+Optional properties:
+
+- reg:	Contain the registers base address and length. It must be configured
+	only if no 'sprd,syscon' under the node.
+
+- sprd,syscon: phandle to the syscon which is in the same address area with
+	       the clock, and so we can get regmap for the clocks from the
+	       syscon device.
+
+Example:
+
+	pmu_gate: pmu-gate {
+		compatible = "sprd,sc9860-pmu-gate";
+		sprd,syscon = <&pmu_regs>;
+		clocks = <&ext_26m>;
+		#clock-cells = <1>;
+	};
+
+	pll: pll {
+		compatible = "sprd,sc9860-pll";
+		sprd,syscon = <&ana_regs>;
+		clocks = <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
+
+	ap_clk: clock-controller@20000000 {
+		compatible = "sprd,sc9860-ap-clk";
+		reg = <0 0x20000000 0 0x400>;
+		clocks = <&ext_26m>, <&pll 0>,
+			 <&pmu_gate 0>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
new file mode 100644
index 0000000000..a0658056c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SC9863A Clock Control Unit
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - sprd,sc9863a-ap-clk
+      - sprd,sc9863a-aon-clk
+      - sprd,sc9863a-apahb-gate
+      - sprd,sc9863a-pmu-gate
+      - sprd,sc9863a-aonapb-gate
+      - sprd,sc9863a-pll
+      - sprd,sc9863a-mpll
+      - sprd,sc9863a-rpll
+      - sprd,sc9863a-dpll
+      - sprd,sc9863a-mm-gate
+      - sprd,sc9863a-mm-clk
+      - sprd,sc9863a-apapb-gate
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for this clock, only list fixed
+      clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      enum:
+        - sprd,sc9863a-ap-clk
+        - sprd,sc9863a-aon-clk
+then:
+  required:
+    - reg
+
+else:
+  description: |
+    Other SC9863a clock nodes should be the child of a syscon node in
+    which compatible string should be:
+            "sprd,sc9863a-glbregs", "syscon", "simple-mfd"
+
+    The 'reg' property for the clock node is also required if there is a sub
+    range of registers for the clocks.
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@21500000 {
+      compatible = "sprd,sc9863a-ap-clk";
+      reg = <0x21500000 0x1000>;
+      clocks = <&ext_26m>, <&ext_32k>;
+      clock-names = "ext-26m", "ext-32k";
+      #clock-cells = <1>;
+    };
+
+  - |
+    syscon@20e00000 {
+      compatible = "sprd,sc9863a-glbregs", "syscon", "simple-mfd";
+      reg = <0x20e00000 0x4000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x20e00000 0x4000>;
+
+      apahb_gate: apahb-gate@0 {
+        compatible = "sprd,sc9863a-apahb-gate";
+        reg = <0x0 0x1020>;
+        #clock-cells = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 0000000000..43d2b6c313
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt
new file mode 100644
index 0000000000..40e0cf1f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt
@@ -0,0 +1,104 @@
+ST Microelectronics Nomadik SRC System Reset and Control
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The Nomadik SRC controller is responsible of controlling chrystals,
+PLLs and clock gates.
+
+Required properties for the SRC node:
+- compatible: must be "stericsson,nomadik-src"
+- reg: must contain the SRC register base and size
+
+Optional properties for the SRC node:
+- disable-sxtalo: if present this will disable the SXTALO
+  i.e. the driver output for the slow 32kHz chrystal, if the
+  board has its own circuitry for providing this oscillator
+- disable-mxtal: if present this will disable the MXTALO,
+  i.e. the driver output for the main (~19.2 MHz) chrystal,
+  if the board has its own circuitry for providing this
+  oscillator
+
+
+PLL nodes: these nodes represent the two PLLs on the system,
+which should both have the main chrystal, represented as a
+fixed frequency clock, as parent.
+
+Required properties for the two PLL nodes:
+- compatible: must be "st,nomadik-pll-clock"
+- clock-cells: must be 0
+- clock-id: must be 1 or 2 for PLL1 and PLL2 respectively
+- clocks: this clock will have main chrystal as parent
+
+
+HCLK nodes: these represent the clock gates on individual
+lines from the HCLK clock tree and the gate for individual
+lines from the PCLK clock tree.
+
+Requires properties for the HCLK nodes:
+- compatible: must be "st,nomadik-hclk-clock"
+- clock-cells: must be 0
+- clock-id: must be the clock ID from 0 to 63 according to
+  this table:
+
+	0:  HCLKDMA0
+	1:  HCLKSMC
+	2:  HCLKSDRAM
+	3:  HCLKDMA1
+	4:  HCLKCLCD
+	5:  PCLKIRDA
+	6:  PCLKSSP
+	7:  PCLKUART0
+	8:  PCLKSDI
+	9:  PCLKI2C0
+	10: PCLKI2C1
+	11: PCLKUART1
+	12: PCLMSP0
+	13: HCLKUSB
+	14: HCLKDIF
+	15: HCLKSAA
+	16: HCLKSVA
+	17: PCLKHSI
+	18: PCLKXTI
+	19: PCLKUART2
+	20: PCLKMSP1
+	21: PCLKMSP2
+	22: PCLKOWM
+	23: HCLKHPI
+	24: PCLKSKE
+	25: PCLKHSEM
+	26: HCLK3D
+	27: HCLKHASH
+	28: HCLKCRYP
+	29: PCLKMSHC
+	30: HCLKUSBM
+	31: HCLKRNG
+	(32, 33, 34, 35 RESERVED)
+	36: CLDCLK
+	37: IRDACLK
+	38: SSPICLK
+	39: UART0CLK
+	40: SDICLK
+	41: I2C0CLK
+	42: I2C1CLK
+	43: UART1CLK
+	44: MSPCLK0
+	45: USBCLK
+	46: DIFCLK
+	47: IPI2CCLK
+	48: IPBMCCLK
+	49: HSICLKRX
+	50: HSICLKTX
+	51: UART2CLK
+	52: MSPCLK1
+	53: MSPCLK2
+	54: OWMCLK
+	(55 RESERVED)
+	56: SKECLK
+	(57 RESERVED)
+	58: 3DCLK
+	59: PCLKMSP3
+	60: MSPCLK3
+	61: MSHCCLK
+	62: USBMCLK
+	63: RNGCCLK
diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
new file mode 100644
index 0000000000..cfa04b614d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
@@ -0,0 +1,138 @@
+STMicroelectronics STM32 Reset and Clock Controller
+===================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32f42xx-rcc"
+  "st,stm32f469-rcc"
+  "st,stm32f746-rcc"
+  "st,stm32f769-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+- #reset-cells: 1, see below
+- #clock-cells: 2, device nodes should specify the clock in their "clocks"
+  property, containing a phandle to the clock device node, an index selecting
+  between gated clocks and other clocks and an index specifying the clock to
+  use.
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - external I2S clock (I2S_CKIN)
+
+Example:
+
+	rcc: rcc@40023800 {
+		#reset-cells = <1>;
+		#clock-cells = <2>
+		compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+		reg = <0x40023800 0x400>;
+		clocks = <&clk_hse>, <&clk_i2s_ckin>;
+	};
+
+Specifying gated clocks
+=======================
+
+The primary index must be set to 0.
+
+The secondary index is the bit number within the RCC register bank, starting
+from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30).
+
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31).
+
+To simplify the usage and to share bit definition with the reset and clock
+drivers of the RCC IP, macros are available to generate the index in
+human-readble format.
+
+For STM32F4 series, the macro are available here:
+ - include/dt-bindings/mfd/stm32f4-rcc.h
+
+Example:
+
+	/* Gated clock, AHB1 bit 0 (GPIOA) */
+	... {
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>
+	};
+
+	/* Gated clock, AHB2 bit 4 (CRYP) */
+	... {
+		clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)>
+	};
+
+Specifying other clocks
+=======================
+
+The primary index must be set to 1.
+
+The secondary index is bound with the following magic numbers:
+
+	0	SYSTICK
+	1	FCLK
+	2	CLK_LSI		(low-power clock source)
+	3	CLK_LSE		(generated from a 32.768 kHz low-speed external
+				 crystal or ceramic resonator)
+	4	CLK_HSE_RTC	(HSE division factor for RTC clock)
+	5	CLK_RTC		(real-time clock)
+	6	PLL_VCO_I2S	(vco frequency of I2S pll)
+	7	PLL_VCO_SAI	(vco frequency of SAI pll)
+	8	CLK_LCD		(LCD-TFT)
+	9	CLK_I2S		(I2S clocks)
+	10	CLK_SAI1	(audio clocks)
+	11	CLK_SAI2
+	12	CLK_I2SQ_PDIV	(post divisor of pll i2s q divisor)
+	13	CLK_SAIQ_PDIV	(post divisor of pll sai q divisor)
+
+	14	CLK_HSI		(Internal ocscillator clock)
+	15	CLK_SYSCLK	(System Clock)
+	16	CLK_HDMI_CEC	(HDMI-CEC clock)
+	17	CLK_SPDIF	(SPDIF-Rx clock)
+	18	CLK_USART1	(U(s)arts clocks)
+	19	CLK_USART2
+	20	CLK_USART3
+	21	CLK_UART4
+	22	CLK_UART5
+	23	CLK_USART6
+	24	CLK_UART7
+	25	CLK_UART8
+	26	CLK_I2C1	(I2S clocks)
+	27	CLK_I2C2
+	28	CLK_I2C3
+	29	CLK_I2C4
+	30	CLK_LPTIMER	(LPTimer1 clock)
+	31	CLK_PLL_SRC
+	32	CLK_DFSDM1
+	33	CLK_ADFSDM1
+	34	CLK_F769_DSI
+)
+
+Example:
+
+	/* Misc clock, FCLK */
+	... {
+		clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)>
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+For example, for CRC reset:
+  crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140
+
+example:
+
+	timer2 {
+		resets	= <&rcc STM32F4_APB1_RESET(TIM2)>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
new file mode 100644
index 0000000000..cac24ee10b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt
@@ -0,0 +1,71 @@
+STMicroelectronics STM32H7 Reset and Clock Controller
+=====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32h743-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+
+- #reset-cells: 1, see below
+
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - low speed external clock signal (LSE)
+  - external I2S clock (I2S_CKIN)
+
+Optional properties:
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+  write protection (RTC clock).
+
+Example:
+
+	rcc: reset-clock-controller@58024400 {
+		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+		reg = <0x58024400 0x400>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
+
+		st,syscfg = <&pwrcfg>;
+};
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+Example:
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+
+For example, for CRC reset:
+  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
+
+Example:
+
+	timer2 {
+		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
new file mode 100644
index 0000000000..5194be0b41
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP1 Reset Clock Controller
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+description: |
+  The RCC IP is both a reset and a clock controller.
+  RCC makes also power management (resume/supend and wakeup interrupt).
+  Please also refer to reset.txt for common reset controller binding usage.
+
+  This binding uses common clock bindings
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+  Specifying clocks
+  =================
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/stm32mp1-clks.h header and can be used in device
+  tree sources.
+
+  Specifying softreset control of devices
+  =======================================
+
+  Device nodes should specify the reset channel required in their "resets"
+  property, containing a phandle to the reset device node and an index specifying
+  which channel to use.
+  The index is the bit number within the RCC registers bank, starting from RCC
+  base address.
+  It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+  Where bit_offset is the bit offset within the register.
+
+  For example on STM32MP1, for LTDC reset:
+     ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
+          = 0x180 / 4 * 32 + 0 = 3072
+
+  The list of valid indices for STM32MP1 is available in:
+  include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset-controller/stm32mp13-resets.h
+
+  This file implements defines like:
+  #define LTDC_R	3072
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    items:
+      - enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
+      - const: syscon
+  clocks: true
+  clock-names: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp13-rcc
+then:
+  properties:
+    clocks:
+      description: Specifies oscillators.
+      maxItems: 5
+
+    clock-names:
+      items:
+        - const: hse
+        - const: hsi
+        - const: csi
+        - const: lse
+        - const: lsi
+  required:
+    - clocks
+    - clock-names
+else:
+  properties:
+    clocks:
+      description:
+        Specifies the external RX clock for ethernet MAC.
+      maxItems: 1
+
+    clock-names:
+      const: ETH_RX_CLK/ETH_REF_CLK
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    rcc: rcc@50000000 {
+        compatible = "st,stm32mp1-rcc-secure", "syscon";
+        reg = <0x50000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        clock-names = "hse", "hsi", "csi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_CSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
new file mode 100644
index 0000000000..9a46cb1d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,32 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih407-clkgen-a9-mux"
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+	clk_m_a9: clk-m-a9@92b0000 {
+		#clock-cells = <0>;
+		compatible = "st,stih407-clkgen-a9-mux";
+		reg = <0x92b0000 0x10000>;
+
+		clocks = <&clockgen_a9_pll 0>,
+			 <&clockgen_a9_pll 0>,
+			 <&clk_s_c0_flexgen 13>,
+			 <&clk_m_a9_ext2f_div2>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
new file mode 100644
index 0000000000..d0fa1e02d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -0,0 +1,40 @@
+Binding for a ST pll clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgen-pll0"
+	"st,clkgen-pll0-a0"
+	"st,clkgen-pll0-c0"
+	"st,clkgen-pll1"
+	"st,clkgen-pll1-c0"
+	"st,stih407-clkgen-plla9"
+	"st,stih418-clkgen-plla9"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgen-a9@92b0000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x92b0000 0xffff>;
+
+		clockgen_a9_pll: clockgen-a9-pll {
+			#clock-cells = <1>;
+			compatible = "st,stih407-clkgen-plla9";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clockgen-a9-pll-odf";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
new file mode 100644
index 0000000000..45ac19bfa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -0,0 +1,68 @@
+Binding for a Clockgen hardware block found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+A Clockgen node can contain pll, diviser or multiplexer nodes.
+
+We will find only the base address of the Clockgen, this base
+address is common of all subnode.
+
+	clockgen_node {
+		reg = <>;
+
+		pll_node {
+			...
+		};
+
+		quadfs_node {
+			...
+		};
+
+		mux_node {
+			...
+		};
+
+		flexgen_node {
+			...
+		};
+		...
+	};
+
+This binding uses the common clock binding[1].
+Each subnode should use the binding described in [2]..[7]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+
+
+Required properties:
+- reg : A Base address and length of the register set.
+
+Example:
+
+	clockgen-a@90ff000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x90ff000 0x1000>;
+
+		clk_s_a0_pll: clk-s-a0-pll {
+			#clock-cells = <1>;
+			compatible = "st,clkgen-pll0";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-a0-pll-ofd-0";
+		};
+
+		clk_s_a0_flexgen: clk-s-a0-flexgen {
+			compatible = "st,flexgen";
+
+			#clock-cells = <1>;
+
+			clocks = <&clk_s_a0_pll 0>,
+				 <&clk_sysin>;
+
+			clock-output-names = "clk-ic-lmi0";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
new file mode 100644
index 0000000000..c918075405
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,133 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+    Clockgen block diagram
+    -------------------------------------------------------------------
+   |                     Flexgen structure                             |
+   |                  ---------------------------------------------    |
+   |                 |    -------       --------       --------    |   |
+clk_sysin            |   |       |     |        |     |        |   |   |
+---|-----------------|-->|       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |Pre     |     |Final   |   |   |
+   | |  |PLL0   |    |   |       |     |Dividers|     |Dividers|   |   |
+   | |->|       |    |   |       |     |  x32   |     |  x32   |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   | Clock |     |        |     |        |   |   |
+   | |  |PLL1   |    |   |       |     |        |     |        |   |   |
+   | |->|       |    |   | Cross |     |        |     |        |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        | CLK_DIV[31:0]
+   | |  |       |    |   | Bar   |====>|        |====>|        |===|=========>
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |  |QUADFS |    |   |       |     |        |     |        |   |   |
+   | |->|    ch0|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch1|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch2|----|-->|       |     | DIV    |     | DIV    |   |   |
+   |    |       |    |   |       |     |  1 to  |     |  1 to  |   |   |
+   |    |    ch3|----|-->|       |     |   1024 |     |     64 |   |   |
+   |     -------     |   |       |     |        |     |        |   |   |
+   |                 |    -------       --------       --------    |   |
+   |                   --------------------------------------------    |
+   |                                                                   |
+    -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+  "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+  audio use case)
+  "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+					and activate synchronous mode)
+  "st,flexgen-stih407-a0"
+  "st,flexgen-stih410-a0"
+  "st,flexgen-stih407-c0"
+  "st,flexgen-stih410-c0"
+  "st,flexgen-stih418-c0"
+  "st,flexgen-stih407-d0"
+  "st,flexgen-stih410-d0"
+  "st,flexgen-stih407-d2"
+  "st,flexgen-stih418-d2"
+  "st,flexgen-stih407-d3"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+  outputs).
+
+- clocks : must be set to the parent's phandle. it could be output clocks of
+  a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+	clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+		#clock-cells = <1>;
+		compatible = "st,flexgen";
+
+		clocks = <&clk_s_c0_pll0 0>,
+			 <&clk_s_c0_pll1 0>,
+			 <&clk_s_c0_quadfs 0>,
+			 <&clk_s_c0_quadfs 1>,
+			 <&clk_s_c0_quadfs 2>,
+			 <&clk_s_c0_quadfs 3>,
+			 <&clk_sysin>;
+
+		clock-output-names = "clk-icn-gpu",
+				     "clk-fdma",
+				     "clk-nand",
+				     "clk-hva",
+				     "clk-proc-stfe",
+				     "clk-proc-tp",
+				     "clk-rx-icn-dmu",
+				     "clk-rx-icn-hva",
+				     "clk-icn-cpu",
+				     "clk-tx-icn-dmu",
+				     "clk-mmc-0",
+				     "clk-mmc-1",
+				     "clk-jpegdec",
+				     "clk-ext2fa9",
+				     "clk-ic-bdisp-0",
+				     "clk-ic-bdisp-1",
+				     "clk-pp-dmu",
+				     "clk-vid-dmu",
+				     "clk-dss-lpc",
+				     "clk-st231-aud-0",
+				     "clk-st231-gp-1",
+				     "clk-st231-dmu",
+				     "clk-icn-lmi",
+				     "clk-tx-icn-disp-1",
+				     "clk-icn-sbc",
+				     "clk-stfe-frc2",
+				     "clk-eth-phy",
+				     "clk-eth-ref-phyclk",
+				     "clk-flash-promip",
+				     "clk-main-disp",
+				     "clk-aux-disp",
+				     "clk-compo-dvp";
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
new file mode 100644
index 0000000000..c4ba2adb0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,48 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,quadfs"
+  "st,quadfs-d0"
+  "st,quadfs-d2"
+  "st,quadfs-d3"
+  "st,quadfs-pll"
+
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+		#clock-cells = <1>;
+		compatible = "st,quadfs-pll";
+		reg = <0x9103000 0x1000>;
+
+		clocks = <&clk_sysin>;
+
+		clock-output-names = "clk-s-c0-fs0-ch0",
+				     "clk-s-c0-fs0-ch1",
+				     "clk-s-c0-fs0-ch2",
+				     "clk-s-c0-fs0-ch3";
+	};
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 0000000000..8f49a1ae03
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
new file mode 100644
index 0000000000..12f17b60ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Clock Generator
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock source (25 MHz)
+      - description: Application-specific clock source (12-27 MHz)
+      - description: RMII reference clock (50 MHz)
+      - description: RGMII RX clock (125 MHz)
+
+  clock-names:
+    items:
+      - const: osc_sys
+      - const: osc_aud
+      - const: gmac_rmii_ref
+      - const: gmac_gr_mii_rxclk
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11800000 {
+            compatible = "starfive,jh7100-clkgen";
+            reg = <0x11800000 0x10000>;
+            clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+            clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
new file mode 100644
index 0000000000..923680a44a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Always-On Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-aoncrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB or GMAC0 RGMII RX
+          - description: APB Bus or STG AXI/AHB
+          - description: GMAC0 GTX or APB Bus
+          - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference
+          - description: GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+          - description: RTC Oscillator (32.768 kHz)
+
+  clock-names:
+    oneOf:
+      - minItems: 5
+        items:
+          - const: osc
+          - enum:
+              - gmac0_rmii_refin
+              - gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+      - minItems: 6
+        items:
+          - const: osc
+          - const: gmac0_rmii_refin
+          - const: gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    clock-controller@17000000 {
+        compatible = "starfive,jh7110-aoncrg";
+        reg = <0x17000000 0x10000>;
+        clocks = <&osc>, <&gmac0_rmii_refin>,
+                 <&gmac0_rgmii_rxin>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>,
+                 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+                 <&rtc_osc>;
+        clock-names = "osc", "gmac0_rmii_refin",
+                      "gmac0_rgmii_rxin", "stg_axiahb",
+                      "apb_bus", "gmac0_gtxclk",
+                      "rtc_osc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
new file mode 100644
index 0000000000..3b8b85be5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-ispcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ISP Top core
+      - description: ISP Top Axi
+      - description: NOC ISP Bus
+      - description: external DVP
+
+  clock-names:
+    items:
+      - const: isp_top_core
+      - const: isp_top_axi
+      - const: noc_bus_isp_axi
+      - const: dvp_clk
+
+  resets:
+    items:
+      - description: ISP Top core
+      - description: ISP Top Axi
+      - description: NOC ISP Bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+  power-domains:
+    maxItems: 1
+    description:
+      ISP domain power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - '#clock-cells'
+  - '#reset-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/power/starfive,jh7110-pmu.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    ispcrg: clock-controller@19810000 {
+        compatible = "starfive,jh7110-ispcrg";
+        reg = <0x19810000 0x10000>;
+        clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
+                 <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>,
+                 <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>,
+                 <&dvp_clk>;
+        clock-names = "isp_top_core", "isp_top_axi",
+                      "noc_bus_isp_axi", "dvp_clk";
+        resets = <&syscrg JH7110_SYSRST_ISP_TOP>,
+                 <&syscrg JH7110_SYSRST_ISP_TOP_AXI>,
+                 <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        power-domains = <&pwrc JH7110_PD_ISP>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
new file mode 100644
index 0000000000..be8300ce86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PLL Clock Generator
+
+description:
+  These PLLs are high speed, low jitter frequency synthesizers in the JH7110.
+  Each PLL works in integer mode or fraction mode, with configuration
+  registers in the sys syscon. So the PLLs node should be a child of
+  SYS-SYSCON node.
+  The formula for calculating frequency is
+  Fvco = Fref * (NI + NF) / M / Q1
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pll
+
+  clocks:
+    maxItems: 1
+    description: Main Oscillator (24 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+      compatible = "starfive,jh7110-pll";
+      clocks = <&osc>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
new file mode 100644
index 0000000000..b64ccd8420
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System-Top-Group Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-stgcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Oscillator (24 MHz)
+      - description: HIFI4 core
+      - description: STG AXI/AHB
+      - description: USB (125 MHz)
+      - description: CPU Bus
+      - description: HIFI4 Axi
+      - description: NOC STG Bus
+      - description: APB Bus
+
+  clock-names:
+    items:
+      - const: osc
+      - const: hifi4_core
+      - const: stg_axiahb
+      - const: usb_125m
+      - const: cpu_bus
+      - const: hifi4_axi
+      - const: nocstg_bus
+      - const: apb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    stgcrg: clock-controller@10230000 {
+        compatible = "starfive,jh7110-stgcrg";
+        reg = <0x10230000 0x10000>;
+        clocks = <&osc>,
+                 <&syscrg JH7110_SYSCLK_HIFI4_CORE>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_USB_125M>,
+                 <&syscrg JH7110_SYSCLK_CPU_BUS>,
+                 <&syscrg JH7110_SYSCLK_HIFI4_AXI>,
+                 <&syscrg JH7110_SYSCLK_NOCSTG_BUS>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>;
+        clock-names = "osc", "hifi4_core",
+                      "stg_axiahb", "usb_125m",
+                      "cpu_bus", "hifi4_axi",
+                      "nocstg_bus", "apb_bus";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
new file mode 100644
index 0000000000..5ba0a885aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-syscrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-syscrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference or GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+          - description: PLL0
+          - description: PLL1
+          - description: PLL2
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference
+          - description: GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+          - description: PLL0
+          - description: PLL1
+          - description: PLL2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: osc
+          - enum:
+              - gmac1_rmii_refin
+              - gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+          - const: pll0_out
+          - const: pll1_out
+          - const: pll2_out
+
+      - items:
+          - const: osc
+          - const: gmac1_rmii_refin
+          - const: gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+          - const: pll0_out
+          - const: pll1_out
+          - const: pll2_out
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13020000 {
+        compatible = "starfive,jh7110-syscrg";
+        reg = <0x13020000 0x10000>;
+        clocks = <&osc>, <&gmac1_rmii_refin>,
+                 <&gmac1_rgmii_rxin>,
+                 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+                 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+                 <&tdm_ext>, <&mclk_ext>,
+                 <&pllclk 0>, <&pllclk 1>, <&pllclk 2>;
+        clock-names = "osc", "gmac1_rmii_refin",
+                      "gmac1_rgmii_rxin",
+                      "i2stx_bclk_ext", "i2stx_lrck_ext",
+                      "i2srx_bclk_ext", "i2srx_lrck_ext",
+                      "tdm_ext", "mclk_ext",
+                      "pll0_out", "pll1_out", "pll2_out";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml
new file mode 100644
index 0000000000..af77bd8c86
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-voutcrg.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-voutcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Video-Output Clock and Reset Generator
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-voutcrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Vout Top core
+      - description: Vout Top Ahb
+      - description: Vout Top Axi
+      - description: Vout Top HDMI MCLK
+      - description: I2STX0 BCLK
+      - description: external HDMI pixel
+
+  clock-names:
+    items:
+      - const: vout_src
+      - const: vout_top_ahb
+      - const: vout_top_axi
+      - const: vout_top_hdmitx0_mclk
+      - const: i2stx0_bclk
+      - const: hdmitx0_pixelclk
+
+  resets:
+    maxItems: 1
+    description: Vout Top core
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Vout domain power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - '#clock-cells'
+  - '#reset-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/power/starfive,jh7110-pmu.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+    voutcrg: clock-controller@295C0000 {
+        compatible = "starfive,jh7110-voutcrg";
+        reg = <0x295C0000 0x10000>;
+        clocks = <&syscrg JH7110_SYSCLK_VOUT_SRC>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_AHB>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_AXI>,
+                 <&syscrg JH7110_SYSCLK_VOUT_TOP_HDMITX0_MCLK>,
+                 <&syscrg JH7110_SYSCLK_I2STX0_BCLK>,
+                 <&hdmitx0_pixelclk>;
+        clock-names = "vout_src", "vout_top_ahb",
+                      "vout_top_axi", "vout_top_hdmitx0_mclk",
+                      "i2stx0_bclk", "hdmitx0_pixelclk";
+        resets = <&syscrg JH7110_SYSRST_VOUT_TOP_SRC>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        power-domains = <&pwrc JH7110_PD_VOUT>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt
new file mode 100644
index 0000000000..dbaa886b22
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt
@@ -0,0 +1,20 @@
+Clock bindings for ST-Ericsson ABx500 clocks
+
+Required properties :
+- compatible : shall contain the following:
+  "stericsson,ab8500-clk"
+- #clock-cells should be <1>
+
+The ABx500 clocks need to be placed as a subnode of an AB8500
+device node, see mfd/ab8500.txt
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/ste-ab8500.h header and can be used in device
+tree sources.
+
+Example:
+
+clock-controller {
+	compatible = "stericsson,ab8500-clk";
+	#clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
new file mode 100644
index 0000000000..2150307219
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 (U8500) clocks
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: While named "U8500 clocks" these clocks are inside the
+  DB8500 digital baseband system-on-chip and its siblings such as
+  DB8520. These bindings consider the clocks present in the SoC
+  itself, not off-chip clocks. There are four different on-chip
+  clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
+  control management unit) clocks and PRCC (peripheral reset and
+  clock controller) clocks. For some reason PRCC 4 does not exist so
+  the itemization can be a bit unintuitive.
+
+properties:
+  compatible:
+    enum:
+      - stericsson,u8500-clks
+      - stericsson,u8540-clks
+      - stericsson,u9540-clks
+
+  reg:
+    items:
+      - description: PRCC 1 register area
+      - description: PRCC 2 register area
+      - description: PRCC 3 register area
+      - description: PRCC 5 register area
+      - description: PRCC 6 register area
+
+  prcmu-clock:
+    description: A subnode with one clock cell for PRCMU (power, reset, control
+      management unit) clocks. The cell indicates which PRCMU clock in the
+      prcmu-clock node the consumer wants to use.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 1
+
+    additionalProperties: false
+
+  prcc-periph-clock:
+    description: A subnode with two clock cells for PRCC (peripheral
+      reset and clock controller) peripheral clocks. The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3,
+      5, 6. The second cell indicates which clock inside the PRCC block it
+      wants, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-kernel-clock:
+    description: A subnode with two clock cells for PRCC (peripheral reset
+      and clock controller) kernel clocks. The first cell indicates which PRCC
+      block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
+      second cell indicates which clock inside the PRCC block it wants, possible
+      values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-reset-controller:
+    description: A subnode with two reset cells for the reset portions of the
+      PRCC (peripheral reset and clock controller). The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3
+      5 and 6. The second cell indicates which reset line inside the PRCC block
+      it wants to control, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#reset-cells':
+        const: 2
+
+    additionalProperties: false
+
+  rtc32k-clock:
+    description: A subnode with zero clock cells for the 32kHz RTC clock.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  smp-twd-clock:
+    description: A subnode for the ARM SMP Timer Watchdog cluster with zero
+      clock cells.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - prcmu-clock
+  - prcc-periph-clock
+  - prcc-kernel-clock
+  - rtc32k-clock
+  - smp-twd-clock
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 0000000000..bcc1408822
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 0000000000..dc808e2f83
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various inteernal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
new file mode 100644
index 0000000000..b2e40bd39a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am62-audio-refclk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am62-audio-refclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Audio Reference Clock
+
+maintainers:
+  - Jai Luthra <j-luthra@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,am62-audio-refclk
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio_refclk0: clock@82e0 {
+        compatible = "ti,am62-audio-refclk";
+        reg = <0x82e0 0x4>;
+        clocks = <&k3_clks 157 0>;
+        assigned-clocks = <&k3_clks 157 0>;
+        assigned-clock-parents = <&k3_clks 157 8>;
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
new file mode 100644
index 0000000000..64b8bce596
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI EHRPWM Time Base Clock
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am654-ehrpwm-tbclk
+          - ti,am64-epwm-tbclk
+          - ti,am62-epwm-tbclk
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ehrpwm_tbclk: clock@4140 {
+        compatible = "ti,am654-ehrpwm-tbclk";
+        reg = <0x4140 0x18>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
new file mode 100644
index 0000000000..21c3ff7647
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
@@ -0,0 +1,42 @@
+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be reference clock(s) connected to CLK_IN0
+  and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+  in case of crystal oscillator or differential signal input
+  configuration. Use clk_in0 and clk_in1 in case of independent
+  single-ended LVCMOS inputs configuration.
+
+Example:
+
+	clocks {
+		clk54: clk54 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
+	};
+	...
+	i2c0: i2c-master@d090000 {
+		...
+		cdce706: clock-synth@69 {
+			compatible = "ti,cdce706";
+			#clock-cells = <1>;
+			reg = <0x69>;
+			clocks = <&clk54>;
+			clock-names = "clk_in0";
+		};
+	};
+	...
+	simple-audio-card,codec {
+		...
+		clocks = <&cdce706 4>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
new file mode 100644
index 0000000000..95c1c6f8b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+  - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+  - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+  - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+  - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+  compatible:
+    enum:
+      - ti,cdce913
+      - ti,cdce925
+      - ti,cdce937
+      - ti,cdce949
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fixed parent clock
+
+  "#clock-cells":
+    const: 1
+
+  vdd-supply:
+    description: Regulator that provides 1.8V Vdd power supply
+
+  vddout-supply:
+    description: |
+      Regulator that provides Vddout power supply.
+      non-L variant: 2.5V or 3.3V for
+      L variant: 1.8V for
+
+  xtal-load-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Crystal load-capacitor value to fine-tune performance on a
+      board, or to compensate for external influences.
+
+patternProperties:
+  "^PLL[1-4]$":
+    type: object
+    description: |
+      optional child node can be used to specify spread
+      spectrum clocking parameters for a board
+
+    additionalProperties: false
+
+    properties:
+      spread-spectrum:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: SSC mode as defined in the data sheet
+
+      spread-spectrum-center:
+        type: boolean
+        description: |
+          Use "centered" mode instead of "max" mode. When
+          present, the clock runs at the requested frequency on average.
+          Otherwise the requested frequency is the maximum value of the
+          SCC range.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdce925: clock-controller@64 {
+            compatible = "ti,cdce925";
+            reg = <0x64>;
+            clocks = <&xtal_27Mhz>;
+            #clock-cells = <1>;
+            xtal-load-pf = <5>;
+            vdd-supply = <&reg_1v8>;
+            vddout-supply = <&reg_3v3>;
+            /* PLL options to get SSC 1% centered */
+            PLL2 {
+                spread-spectrum = <4>;
+                spread-spectrum-center;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
new file mode 100644
index 0000000000..13d7b3d03d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMK04832 Clock Controller
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B
+  support. The LMK04832 is pin compatible with the LMK0482x family.
+
+  Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lmk04832
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  clocks:
+    items:
+      - description: PLL2 reference clock.
+
+  clock-names:
+    items:
+      - const: oscin
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,spi-4wire-rdbk:
+    description: |
+      Select SPI 4wire readback pin configuration.
+      Available readback pins are,
+        CLKin_SEL0 0
+        CLKin_SEL1 1
+        RESET 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,vco-hz:
+    description: Optional to set VCO frequency of the PLL in Hertz.
+
+  ti,sysref-ddly:
+    description: SYSREF digital delay value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 8191
+    default: 8
+
+  ti,sysref-mux:
+    description: |
+      SYSREF Mux configuration.
+      Available options are,
+        Normal SYNC 0
+        Re-clocked 1
+        SYSREF Pulser 2
+        SYSREF Continuous 3
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 3
+
+  ti,sync-mode:
+    description: SYNC pin configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 1
+
+  ti,sysref-pulse-count:
+    description:
+      Number of SYSREF pulses to send when SYSREF is not in continuous mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+    default: 4
+
+patternProperties:
+  "@[0-9a-d]+$":
+    type: object
+    description:
+      Child nodes used to configure output clocks.
+
+    properties:
+      reg:
+        description:
+          clock output identifier.
+        minimum: 0
+        maximum: 13
+
+      ti,clkout-fmt:
+        description:
+          Clock output format.
+          Available options are,
+            Powerdown 0x00
+            LVDS 0x01
+            HSDS 6 mA 0x02
+            HSDS 8 mA 0x03
+            LVPECL 1600 mV 0x04
+            LVPECL 2000 mV 0x05
+            LCPECL 0x06
+            CML 16 mA 0x07
+            CML 24 mA 0x08
+            CML 32 mA 0x09
+            CMOS (Off/Inverted) 0x0a
+            CMOS (Normal/Off) 0x0b
+            CMOS (Inverted/Inverted) 0x0c
+            CMOS (Inverted/Normal) 0x0d
+            CMOS (Normal/Inverted) 0x0e
+            CMOS (Normal/Normal) 0x0f
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      ti,clkout-sysref:
+        description:
+          Select SYSREF clock path for output clock.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clocks {
+        lmk04832_oscin: oscin {
+            compatible = "fixed-clock";
+
+            #clock-cells = <0>;
+            clock-frequency = <122880000>;
+            clock-output-names = "lmk04832-oscin";
+        };
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lmk04832: clock-controller@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0>;
+
+            compatible = "ti,lmk04832";
+            spi-max-frequency = <781250>;
+
+            reset-gpios = <&gpio_lmk 0 0 0>;
+
+            #clock-cells = <1>;
+            clocks = <&lmk04832_oscin>;
+            clock-names = "oscin";
+
+            ti,spi-4wire-rdbk = <0>;
+            ti,vco-hz = <2457600000>;
+
+            assigned-clocks =
+                <&lmk04832 0>, <&lmk04832 1>,
+                <&lmk04832 2>, <&lmk04832 3>,
+                <&lmk04832 4>,
+                <&lmk04832 6>, <&lmk04832 7>,
+                <&lmk04832 10>, <&lmk04832 11>;
+            assigned-clock-rates =
+                <122880000>, <384000>,
+                <122880000>, <384000>,
+                <122880000>,
+                <153600000>, <384000>,
+                <614400000>, <384000>;
+
+            clkout0@0 {
+                reg = <0>;
+                ti,clkout-fmt = <0x01>; // LVDS
+            };
+
+            clkout1@1 {
+                reg = <1>;
+                ti,clkout-fmt = <0x01>; // LVDS
+                ti,clkout-sysref;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
new file mode 100644
index 0000000000..0a9d6a4c4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI clock controller
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This clock controller node uses the TI SCI protocol to perform various clock
+  management of various hardware modules (devices) present on the SoC. This
+  node must be a child node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^clock-controller$"
+
+  compatible:
+    const: ti,k2g-sci-clk
+
+  "#clock-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the clock ID.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_clks: clock-controller {
+        compatible = "ti,k2g-sci-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
new file mode 100644
index 0000000000..d20db7974a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
@@ -0,0 +1,63 @@
+Texas Instruments clkctrl clock binding
+
+Texas Instruments SoCs can have a clkctrl clock controller for each
+interconnect target module. The clkctrl clock controller manages functional
+and interface clocks for each module. Each clkctrl controller can also
+gate one or more optional functional clocks for a module, and can have one
+or more clock muxes. There is a clkctrl clock controller typically for each
+interconnect target module on omap4 and later variants.
+
+The clock consumers can specify the index of the clkctrl clock using
+the hardware offset from the clkctrl instance register space. The optional
+clocks can be specified by clkctrl hardware offset and the index of the
+optional clock.
+
+For more information, please see the Linux clock framework binding at
+Documentation/devicetree/bindings/clock/clock-bindings.txt.
+
+Required properties :
+- compatible : shall be "ti,clkctrl" or a clock domain specific name:
+	       "ti,clkctrl-l4-cfg"
+	       "ti,clkctrl-l4-per"
+	       "ti,clkctrl-l4-secure"
+	       "ti,clkctrl-l4-wkup"
+- clock-output-names : from common clock binding
+- #clock-cells : shall contain 2 with the first entry being the instance
+		 offset from the clock domain base and the second being the
+		 clock index
+- reg : clock registers
+
+Example: Clock controller node on omap 4430:
+
+&cm2 {
+	l4per: cm@1400 {
+		cm_l4per@0 {
+			cm_l4per_clkctrl: clock@20 {
+				compatible = "ti,clkctrl";
+				clock-output-names = "l4_per";
+				reg = <0x20 0x1b0>;
+				#clock-cells = <2>;
+			};
+		};
+	};
+};
+
+Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h
+
+#define OMAP4_CLKCTRL_OFFSET		0x20
+#define OMAP4_CLKCTRL_INDEX(offset)	((offset) - OMAP4_CLKCTRL_OFFSET)
+#define MODULEMODE_HWCTRL		1
+#define MODULEMODE_SWCTRL		2
+
+#define OMAP4_GPTIMER10_CLKTRL		OMAP4_CLKCTRL_INDEX(0x28)
+#define OMAP4_GPTIMER11_CLKTRL		OMAP4_CLKCTRL_INDEX(0x30)
+#define OMAP4_GPTIMER2_CLKTRL		OMAP4_CLKCTRL_INDEX(0x38)
+...
+#define OMAP4_GPIO2_CLKCTRL		OMAP_CLKCTRL_INDEX(0x60)
+
+Example: Clock consumer node for GPIO2:
+
+&gpio2 {
+       clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0
+		 &cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
new file mode 100644
index 0000000000..c35cb6c4af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments keystone pll controller
+
+The main pll controller used to drive theC66x CorePacs, the switch fabric,
+and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
+the NETCP modules) requires a PLL Controller to manage the various clock
+divisions, gating, and synchronization.
+
+Required properties:
+
+- compatible:		"ti,keystone-pllctrl", "syscon"
+
+- reg:			contains offset/length value for pll controller
+			registers space.
+
+Example:
+
+pllctrl: pll-controller@02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt
new file mode 100644
index 0000000000..4c8a2ce2cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt
@@ -0,0 +1,41 @@
+Binding for Texas Instruments ADPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped ADPLL with two to three selectable input clocks
+and three to four children.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of "ti,dm814-adpll-s-clock" or
+  "ti,dm814-adpll-lj-clock" depending on the type of the ADPLL
+- #clock-cells : from common clock binding; shall be set to 1.
+- clocks : link phandles of parent clocks clkinp and clkinpulow, note
+  that the adpll-s-clock also has an optional clkinphif
+- reg : address and length of the register set for controlling the ADPLL.
+
+Examples:
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt
new file mode 100644
index 0000000000..ade4dd4c30
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/apll.txt
@@ -0,0 +1,45 @@
+Binding for Texas Instruments APLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped APLL with usually two selectable input clocks
+(reference clock and bypass clock), with analog phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) APLL mostly behaves like
+a subtype of a DPLL [2], although a simplified one at that.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the APLL.
+  It contains the information of registers in the following order:
+	"control" - contains the control register offset
+	"idlest" - contains the idlest register offset
+	"autoidle" - contains the autoidle register offset (OMAP2 only)
+- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
+- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
+- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
+
+Examples:
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
+		compatible = "ti,dra7-apll-clock";
+	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
new file mode 100644
index 0000000000..7c735dde9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt
@@ -0,0 +1,39 @@
+Binding for Texas Instruments autoidle clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a register mapped
+clock which can be put to idle automatically by hardware based on the usage
+and a configuration bit setting. Autoidle clock is never an individual
+clock, it is always a derivative of some basic clock like a gate, divider,
+or fixed-factor.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- reg : offset for the register controlling the autoidle
+- ti,autoidle-shift : bit shift of the autoidle enable bit
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0
+
+Examples:
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000000..9c6199249c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,27 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1] in consumer role.
+Every clock on TI SoC belongs to one clockdomain, but software
+only needs this information for specific clocks which require
+their parent clockdomain to be controlled when the clock is
+enabled/disabled. This binding doesn't define a new clock
+binding type, it is used to group existing clock nodes under
+hardware hierarchy.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Optional properties:
+- clock-output-names : from common clock binding.
+
+Examples:
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
new file mode 100644
index 0000000000..33ac7c9ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -0,0 +1,57 @@
+Binding for TI composite clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped composite clock with multiple different sub-types;
+
+a multiplexer clock with multiple input clock signals or parents, one
+of which can be selected as output, this behaves exactly as [2]
+
+an adjustable clock rate divider, this behaves exactly as [3]
+
+a gating function which can be used to enable and disable the output
+clock, this behaves exactly as [4]
+
+The binding must provide a list of the component clocks that shall be
+merged to this clock. The component clocks shall be of one of the
+"ti,*composite*-clock" types.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/mux.txt
+[3] Documentation/devicetree/bindings/clock/ti/divider.txt
+[4] Documentation/devicetree/bindings/clock/ti/gate.txt
+
+Required properties:
+- compatible : shall be: "ti,composite-clock"
+- clocks : link phandles of component clocks
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Optional properties:
+- clock-output-names : from common clock binding.
+
+Examples:
+
+usb_l4_gate_ick: usb_l4_gate_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-interface-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <5>;
+	reg = <0x0a10>;
+};
+
+usb_l4_div_ick: usb_l4_div_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&l4_ick>;
+	ti,bit-shift = <4>;
+	ti,max-div = <1>;
+	reg = <0x0a40>;
+	ti,index-starts-at-one;
+};
+
+usb_l4_ick: usb_l4_ick {
+	#clock-cells = <0>;
+	compatible = "ti,composite-clock";
+	clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt
new file mode 100644
index 0000000000..1e03dce99a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt
@@ -0,0 +1,93 @@
+Binding for TI DA8XX/OMAP-L13X/AM17XX/AM18XX CFGCHIP clocks
+
+TI DA8XX/OMAP-L13X/AM17XX/AM18XX SoCs contain a general purpose set of
+registers call CFGCHIPn. Some of these registers function as clock
+gates. This document describes the bindings for those clocks.
+
+All of the clock nodes described below must be child nodes of a CFGCHIP node
+(compatible = "ti,da830-cfgchip").
+
+USB PHY clocks
+--------------
+Required properties:
+- compatible: shall be "ti,da830-usb-phy-clocks".
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "fck", "usb_refclkin", "auxclk"
+
+This node provides two clocks. The clock at index 0 is the USB 2.0 PHY 48MHz
+clock and the clock at index 1 is the USB 1.1 PHY 48MHz clock.
+
+eHRPWM Time Base Clock (TBCLK)
+------------------------------
+Required properties:
+- compatible: shall be "ti,da830-tbclksync".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandle to the parent clock
+- clock-names: shall be "fck"
+
+PLL DIV4.5 divider
+------------------
+Required properties:
+- compatible: shall be "ti,da830-div4p5ena".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandle to the parent clock
+- clock-names: shall be "pll0_pllout"
+
+EMIFA clock source (ASYNC1)
+---------------------------
+Required properties:
+- compatible: shall be "ti,da850-async1-clksrc".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "pll0_sysclk3", "div4.5"
+
+ASYNC3 clock source
+-------------------
+Required properties:
+- compatible: shall be "ti,da850-async3-clksrc".
+- #clock-cells: from common clock binding; shall be set to 0.
+- clocks: phandles to the parent clocks corresponding to clock-names
+- clock-names: shall be "pll0_sysclk2", "pll1_sysclk2"
+
+Examples:
+
+	cfgchip: syscon@1417c {
+		compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+		reg = <0x1417c 0x14>;
+
+		usb_phy_clk: usb-phy-clocks {
+			compatible = "ti,da830-usb-phy-clocks";
+			#clock-cells = <1>;
+			clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>;
+			clock-names = "fck", "usb_refclkin", "auxclk";
+		};
+		ehrpwm_tbclk: ehrpwm_tbclk {
+			compatible = "ti,da830-tbclksync";
+			#clock-cells = <0>;
+			clocks = <&psc1 17>;
+			clock-names = "fck";
+		};
+		div4p5_clk: div4.5 {
+			compatible = "ti,da830-div4p5ena";
+			#clock-cells = <0>;
+			clocks = <&pll0_pllout>;
+			clock-names = "pll0_pllout";
+		};
+		async1_clk: async1 {
+			compatible = "ti,da850-async1-clksrc";
+			#clock-cells = <0>;
+			clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+			clock-names = "pll0_sysclk3", "div4.5";
+		};
+		async3_clk: async3 {
+			compatible = "ti,da850-async3-clksrc";
+			#clock-cells = <0>;
+			clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+			clock-names = "pll0_sysclk2", "pll1_sysclk2";
+		};
+	};
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
+
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
new file mode 100644
index 0000000000..c989453831
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -0,0 +1,96 @@
+Binding for TI DaVinci PLL Controllers
+
+The PLL provides clocks to most of the components on the SoC. In addition
+to the PLL itself, this controller also contains bypasses, gates, dividers,
+an multiplexers for various clock signals.
+
+Required properties:
+- compatible: shall be one of:
+	- "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
+	- "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area.
+- clocks: phandles corresponding to the clock names
+- clock-names: names of the clock sources - depends on compatible string
+	- for "ti,da850-pll0", shall be "clksrc", "extclksrc"
+	- for "ti,da850-pll1", shall be "clksrc"
+
+Optional properties:
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
+	wave input on the OSCIN pin instead of using a crystal oscillator.
+	This property is only valid when compatible = "ti,da850-pll0".
+
+
+Optional child nodes:
+
+pllout
+	Describes the main PLL clock output (before POSTDIV). The node name must
+	be "pllout".
+
+	Required properties:
+	- #clock-cells: shall be 0
+
+sysclk
+	Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
+	domains. The node name must be "sysclk". Consumers of this node should
+	use "n" in "SYSCLKn" as the index parameter for the clock cell.
+
+	Required properties:
+	- #clock-cells: shall be 1
+
+auxclk
+	Describes the AUXCLK output of the PLL. The node name must be "auxclk".
+	This child node is only valid when compatible = "ti,da850-pll0".
+
+	Required properties:
+	- #clock-cells: shall be 0
+
+obsclk
+	Describes the OBSCLK output of the PLL. The node name must be "obsclk".
+
+	Required properties:
+	- #clock-cells: shall be 0
+
+
+Examples:
+
+	pll0: clock-controller@11000 {
+		compatible = "ti,da850-pll0";
+		reg = <0x11000 0x1000>;
+		clocks = <&ref_clk>, <&pll1_sysclk 3>;
+		clock-names = "clksrc", "extclksrc";
+		ti,clkmode-square-wave;
+
+		pll0_pllout: pllout {
+			#clock-cells = <0>;
+		};
+
+		pll0_sysclk: sysclk {
+			#clock-cells = <1>;
+		};
+
+		pll0_auxclk: auxclk {
+			#clock-cells = <0>;
+		};
+
+		pll0_obsclk: obsclk {
+			#clock-cells = <0>;
+		};
+	};
+
+	pll1: clock-controller@21a000 {
+		compatible = "ti,da850-pll1";
+		reg = <0x21a000 0x1000>;
+		clocks = <&ref_clk>;
+		clock-names = "clksrc";
+
+		pll0_sysclk: sysclk {
+			#clock-cells = <1>;
+		};
+
+		pll0_obsclk: obsclk {
+			#clock-cells = <0>;
+		};
+	};
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
new file mode 100644
index 0000000000..5f746ebf7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
@@ -0,0 +1,71 @@
+Binding for TI DaVinci Power Sleep Controller (PSC)
+
+The PSC provides power management, clock gating and reset functionality. It is
+primarily used for clocking.
+
+Required properties:
+- compatible: shall be one of:
+	- "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX
+	- "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area
+- #clock-cells: from common clock binding; shall be set to 1
+- #power-domain-cells: from generic power domain binding; shall be set to 1.
+- clocks: phandles to clocks corresponding to the clock-names property
+- clock-names: list of parent clock names - depends on compatible value
+	- for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2",
+	  "pll0_sysclk4", "pll0_sysclk6", "async1"
+	- for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3"
+
+Optional properties:
+- #reset-cells: from reset binding; shall be set to 1 - only applicable when
+  at least one local domain provides a local reset.
+
+Consumers:
+
+	Clock, power domain and reset consumers shall use the local power domain
+	module ID (LPSC) as the index corresponding to the clock cell. Refer to
+	the device-specific datasheet to find these numbers. NB: Most local
+	domains	only provide a clock/power domain and not a reset.
+
+Examples:
+
+	psc0: clock-controller@10000 {
+		compatible = "ti,da850-psc0";
+		reg = <0x10000 0x1000>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+		#reset-cells = <1>;
+		clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+			 <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>;
+		clock_names = "pll0_sysclk1", "pll0_sysclk2",
+			      "pll0_sysclk4", "pll0_sysclk6", "async1";
+	};
+	psc1: clock-controller@227000 {
+		compatible = "ti,da850-psc1";
+		reg = <0x227000 0x1000>;
+		#clock-cells = <1>;
+		#power-domain-cells = <1>;
+		clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>;
+		clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+	};
+
+	/* consumer */
+	dsp: dsp@11800000 {
+		compatible = "ti,da850-dsp";
+		reg = <0x11800000 0x40000>,
+		      <0x11e00000 0x8000>,
+		      <0x11f00000 0x8000>,
+		      <0x01c14044 0x4>,
+		      <0x01c14174 0x8>;
+		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+		clocks = <&psc0 15>;
+		power-domains = <&psc0 15>;
+		resets = <&psc0 15>;
+	};
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt
+- Documentation/devicetree/bindings/power/power-domain.yaml
+- Documentation/devicetree/bindings/reset/reset.txt
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt
new file mode 100644
index 0000000000..9b13b32974
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/divider.txt
@@ -0,0 +1,117 @@
+Binding for TI divider clock
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped adjustable clock rate divider that does not gate and has
+only one input clock or parent.  By default the value programmed into
+the register is one less than the actual divisor value.  E.g:
+
+register value		actual divisor value
+0			1
+1			2
+2			3
+
+This assumption may be modified by the following optional properties:
+
+ti,index-starts-at-one - valid divisor values start at 1, not the default
+of 0.  E.g:
+register value		actual divisor value
+1			1
+2			2
+3			3
+
+ti,index-power-of-two - valid divisor values are powers of two.  E.g:
+register value		actual divisor value
+0			1
+1			2
+2			4
+
+Additionally an array of valid dividers may be supplied like so:
+
+	ti,dividers = <4>, <8>, <0>, <16>;
+
+Which will map the resulting values to a divisor table by their index:
+register value		actual divisor value
+0			4
+1			8
+2			<invalid divisor, skipped>
+3			16
+
+Any zero value in this array means the corresponding bit-value is invalid
+and must not be used.
+
+The binding must also provide the register to control the divider and
+unless the divider array is provided, min and max dividers. Optionally
+the number of bits to shift that mask, if necessary. If the shift value
+is missing it is the same as supplying a zero shift.
+
+This binding can also optionally provide support to the hardware autoidle
+feature, see [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable divider
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,dividers : array of integers defining divisors
+- ti,bit-shift : number of bits to shift the divider value, defaults to 0
+- ti,min-div : min divisor for dividing the input clock rate, only
+  needed if the first divisor is offset from the default value (1)
+- ti,max-div : max divisor for dividing the input clock rate, only needed
+  if ti,dividers is not defined.
+- ti,index-starts-at-one : valid divisor programming starts at 1, not zero,
+  only valid if ti,dividers is not defined.
+- ti,index-power-of-two : valid divisor programming must be a power of two,
+  only valid if ti,dividers is not defined.
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock,
+  see [2]
+- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0,
+  see [2]
+- ti,set-rate-parent : clk_set_rate is propagated to parent
+- ti,latch-bit : latch the divider value to HW, only needed if the register
+  access requires this. As an example dra76x DPLL_GMAC H14 divider implements
+  such behavior.
+
+Examples:
+dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&dpll_usb_ck>;
+	ti,max-div = <127>;
+	reg = <0x190>;
+	ti,index-starts-at-one;
+};
+
+aess_fclk: aess_fclk@4a004528 {
+	#clock-cells = <0>;
+	compatible = "ti,divider-clock";
+	clocks = <&abe_clk>;
+	ti,bit-shift = <24>;
+	reg = <0x528>;
+	ti,max-div = <2>;
+};
+
+dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&dpll_core_x2_ck>;
+	ti,max-div = <31>;
+	reg = <0x0134>;
+	ti,index-starts-at-one;
+};
+
+ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+	#clock-cells = <0>;
+	compatible = "ti,composite-divider-clock";
+	clocks = <&corex2_fck>;
+	ti,bit-shift = <8>;
+	reg = <0x0a40>;
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt
new file mode 100644
index 0000000000..37a7cb6ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt
@@ -0,0 +1,105 @@
+Binding for Texas Instruments DPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped DPLL with usually two selectable input clocks
+(reference clock and bypass clock), with digital phase locked
+loop logic for multiplying the input clock to a desired output
+clock. This clock also typically supports different operation
+modes (locked, low power stop etc.) This binding has several
+sub-types, which effectively result in slightly different setup
+for the actual DPLL clock.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of:
+		"ti,omap3-dpll-clock",
+		"ti,omap3-dpll-core-clock",
+		"ti,omap3-dpll-per-clock",
+		"ti,omap3-dpll-per-j-type-clock",
+		"ti,omap4-dpll-clock",
+		"ti,omap4-dpll-x2-clock",
+		"ti,omap4-dpll-core-clock",
+		"ti,omap4-dpll-m4xen-clock",
+		"ti,omap4-dpll-j-type-clock",
+		"ti,omap5-mpu-dpll-clock",
+		"ti,am3-dpll-no-gate-clock",
+		"ti,am3-dpll-j-type-clock",
+		"ti,am3-dpll-no-gate-j-type-clock",
+		"ti,am3-dpll-clock",
+		"ti,am3-dpll-core-clock",
+		"ti,am3-dpll-x2-clock",
+		"ti,omap2-dpll-core-clock",
+
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks, first entry lists reference clock
+  and second entry bypass clock
+- reg : offsets for the register set for controlling the DPLL.
+  Registers are listed in following order:
+	"control" - contains the control register base address
+	"idlest" - contains the idle status register base address
+	"mult-div1" - contains the multiplier / divider register base address
+	"autoidle" - contains the autoidle register base address (optional)
+	"ssc-deltam" - DPLL supports spread spectrum clocking (SSC), contains
+		       the frequency spreading register base address (optional)
+	"ssc-modfreq" - DPLL supports spread spectrum clocking (SSC), contains
+		        the modulation frequency register base address
+			(optional)
+  ti,am3-* dpll types do not have autoidle register
+  ti,omap2-* dpll type does not support idlest / autoidle registers
+
+Optional properties:
+- DPLL mode setting - defining any one or more of the following overrides
+  default setting.
+	- ti,low-power-stop : DPLL supports low power stop mode, gating output
+	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
+	- ti,lock : DPLL locks in programmed rate
+	- ti,min-div : the minimum divisor to start from to round the DPLL
+		       target rate
+	- ti,ssc-deltam : DPLL supports spread spectrum clocking, frequency
+			  spreading in permille (10th of a percent)
+	- ti,ssc-modfreq-hz : DPLL supports spread spectrum clocking, spread
+			      spectrum modulation frequency
+	- ti,ssc-downspread : DPLL supports spread spectrum clocking, boolean
+			      to enable the downspread feature
+
+Examples:
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x490>, <0x45c>, <0x488>, <0x468>;
+	};
+
+	dpll2_ck: dpll2_ck@48004004 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		ti,low-power-stop;
+		ti,low-power-bypass;
+		ti,lock;
+		reg = <0x4>, <0x24>, <0x34>, <0x40>;
+	};
+
+	dpll_core_ck: dpll_core_ck@44e00490 {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x90>, <0x5c>, <0x68>;
+	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
new file mode 100644
index 0000000000..68504079f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -0,0 +1,94 @@
+Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
+
+The ATL IP is used to generate clock to be used to synchronize baseband and
+audio codec. A single ATL IP provides four ATL clock instances sharing the same
+functional clock but can be configured to provide different clocks.
+ATL can maintain a clock averages to some desired frequency based on the bws/aws
+signals - can compensate the drift between the two ws signal.
+
+In order to provide the support for ATL and its output clocks (which can be used
+internally within the SoC or external components) two sets of bindings is needed:
+
+Clock tree binding:
+This binding uses the common clock binding[1].
+To be able to integrate the ATL clocks with DT clock tree.
+Provides ccf level representation of the ATL clocks to be used by drivers.
+Since the clock instances are part of a single IP this binding is used as a node
+for the DT clock tree, the IP driver is needed to handle the actual configuration
+of the IP.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-atl-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles to functional clock of ATL
+
+Binding for the IP driver:
+This binding is used to configure the IP driver which is going to handle the
+configuration of the IP for the ATL clock instances.
+
+Required properties:
+- compatible : shall be "ti,dra7-atl"
+- reg : base address for the ATL IP
+- ti,provided-clocks : List of phandles to the clocks associated with the ATL
+- clocks : link phandles to functional clock of ATL
+- clock-names : Shall be set to "fck"
+- ti,hwmods : Shall be set to "atl"
+
+Optional properties:
+Configuration of ATL instances:
+- atl{0/1/2/3} {
+	- bws : Baseband word select signal selection
+	- aws : Audio word select signal selection
+};
+
+For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include
+file.
+
+Examples:
+/* clock bindings for atl provided clocks */
+atl_clkin0_ck: atl_clkin0_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin1_ck: atl_clkin1_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin2_ck: atl_clkin2_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin3_ck: atl_clkin3_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+/* binding for the IP */
+atl: atl@4843c000 {
+	compatible = "ti,dra7-atl";
+	reg = <0x4843c000 0x3ff>;
+	ti,hwmods = "atl";
+	ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
+	clocks = <&atl_gfclk_mux>;
+	clock-names = "fck";
+};
+
+#include <dt-bindings/clock/ti-dra7-atl.h>
+
+&atl {
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt
new file mode 100644
index 0000000000..c19b3f253b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt
@@ -0,0 +1,33 @@
+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
new file mode 100644
index 0000000000..518e3c1422
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -0,0 +1,44 @@
+Binding for TI fixed factor rate clock sources.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1], and also uses the autoidle
+support from TI autoidle clock [2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt
+
+Required properties:
+- compatible : shall be "ti,fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- ti,clock-div: fixed divider.
+- ti,clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
+  see [2]
+- reg: offset for the autoidle register of this clock, see [2]
+- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2]
+- ti,set-rate-parent: clk_set_rate is propagated to parent
+
+Example:
+	clock {
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		ti,clock-div = <2>;
+		ti,clock-mult = <1>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
new file mode 100644
index 0000000000..4982615c01
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -0,0 +1,107 @@
+Binding for Texas Instruments gate clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features. If no register
+is provided for this clock, the code assumes that a clockdomain
+will be controlled instead and the corresponding hw-ops for
+that is used.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+
+Required properties:
+- compatible : shall be one of:
+  "ti,gate-clock" - basic gate clock
+  "ti,wait-gate-clock" - gate clock which waits until clock is active before
+			 returning from clk_enable()
+  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
+  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
+  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
+			  clock directly from a clockdomain, see [3] how
+			  to map clockdomains properly
+  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
+			  required for a hardware errata
+  "ti,composite-gate-clock" - composite gate clock, to be part of composite
+			      clock
+  "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
+				      for clock to be active before returning
+				      from clk_enable()
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : offset for register controlling adjustable gate, not needed for
+	ti,clkdm-gate-clock type
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,bit-shift : bit shift for programming the clock gate, invalid for
+		 ti,clkdm-gate-clock type
+- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
+  gates the clock and clearing the bit ungates the clock.
+
+Examples:
+	mmchs2_fck: mmchs2_fck@48004a00 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+
+	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <0>;
+	};
+
+	emac_ick: emac_ick@4800259c {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <1>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
new file mode 100644
index 0000000000..d3eb5ca92a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -0,0 +1,57 @@
+Binding for Texas Instruments interface clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. This clock is
+quite much similar to the basic gate-clock [2], however,
+it supports a number of additional features, including
+companion clock finding (match corresponding functional gate
+clock) and hardware autoidle enable / disable.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+
+Required properties:
+- compatible : shall be one of:
+  "ti,omap3-interface-clock" - basic OMAP3 interface clock
+  "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware
+				       capability for waiting clock to be ready
+  "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW
+					handling
+  "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling
+  "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling
+  "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling
+  "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW
+				  handling
+- #clock-cells : from common clock binding; shall be set to 0
+- clocks : link to phandle of parent clock
+- reg : base address for the control register
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
+
+Examples:
+	aes1_ick: aes1_ick@48004a14 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x48004a14 0x4>;
+		ti,bit-shift = <3>;
+	};
+
+	cam_ick: cam_ick@48004f10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x48004f10 0x4>;
+		ti,bit-shift = <0>;
+	};
+
+	ssi_ick_3430es2: ssi_ick_3430es2@48004a10 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x48004a10 0x4>;
+		ti,bit-shift = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
new file mode 100644
index 0000000000..b33f641f10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -0,0 +1,80 @@
+Binding for TI mux clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1].  It assumes a
+register-mapped multiplexer with multiple input clock signals or
+parents, one of which can be selected as output.  This clock does not
+gate or adjust the parent rate via a divider or multiplier.
+
+By default the "clocks" property lists the parents in the same order
+as they are programmed into the register.  E.g:
+
+	clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>;
+
+results in programming the register as follows:
+
+register value		selected parent clock
+0			foo_clock
+1			bar_clock
+2			baz_clock
+
+Some clock controller IPs do not allow a value of zero to be programmed
+into the register, instead indexing begins at 1.  The optional property
+"index-starts-at-one" modified the scheme as follows:
+
+register value		selected clock parent
+1			foo_clock
+2			bar_clock
+3			baz_clock
+
+The binding must provide the register to control the mux. Optionally
+the number of bits to shift the control field in the register can be
+supplied. If the shift value is missing it is the same as supplying
+a zero shift.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks
+- reg : register offset for register controlling adjustable mux
+
+Optional properties:
+- clock-output-names : from common clock binding.
+- ti,bit-shift : number of bits to shift the bit-mask, defaults to
+  0 if not present
+- ti,index-starts-at-one : valid input select programming starts at 1, not
+  zero
+- ti,set-rate-parent : clk_set_rate is propagated to parent clock,
+  not supported by the composite-mux-clock subtype
+- ti,latch-bit : latch the mux value to HW, only needed if the register
+  access requires this. As an example, dra7x DPLL_GMAC H14 muxing
+  implements such behavior.
+
+Examples:
+
+sys_clkin_ck: sys_clkin_ck@4a306110 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+	reg = <0x0110>;
+	ti,index-starts-at-one;
+};
+
+abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 {
+	#clock-cells = <0>;
+	compatible = "ti,mux-clock";
+	clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+	ti,bit-shift = <24>;
+	reg = <0x0108>;
+};
+
+mcbsp5_mux_fck: mcbsp5_mux_fck {
+	#clock-cells = <0>;
+	compatible = "ti,composite-mux-clock";
+	clocks = <&core_96m_fck>, <&mcbsp_clks>;
+	ti,bit-shift = <4>;
+	reg = <0x02d8>;
+};
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 0000000000..d525f96cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 0000000000..d36558aa39
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 0000000000..081f85b1eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt
new file mode 100644
index 0000000000..109ffa3a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt
@@ -0,0 +1,41 @@
+* Clock bindings for Freescale Vybrid VF610 SOC
+
+Required properties:
+- compatible: Should be "fsl,vf610-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+	given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+- clock-names: list of names of clocks which are external input clocks to the
+	given clock controller.
+
+Input clocks for top clock controller:
+	- sxosc (external crystal oscillator 32KHz, recommended)
+	- fxosc (external crystal oscillator 24MHz, recommended)
+	- audio_ext
+	- enet_ext
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
+for the full list of VF610 clock IDs.
+
+Examples:
+
+clks: ccm@4006b000 {
+	compatible = "fsl,vf610-ccm";
+	reg = <0x4006b000 0x1000>;
+	#clock-cells = <1>;
+	clocks = <&sxosc>, <&fxosc>;
+	clock-names = "sxosc", "fxosc";
+};
+
+uart1: serial@40028000 {
+	compatible = "fsl,vf610-uart";
+	reg = <0x40028000 0x1000>;
+	interrupts = <0 62 0x04>;
+	clocks = <&clks VF610_CLK_UART1>;
+	clock-names = "ipg";
+};
diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt
new file mode 100644
index 0000000000..91d71cc031
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vt8500.txt
@@ -0,0 +1,74 @@
+Device Tree Clock bindings for arch-vt8500
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
+	"wm,wm8650-pll-clock" - for a WM8650 PLL clock
+	"wm,wm8750-pll-clock" - for a WM8750 PLL clock
+	"wm,wm8850-pll-clock" - for a WM8850 PLL clock
+	"via,vt8500-device-clock" - for a VT/WM device clock
+
+Required properties for PLL clocks:
+- reg : shall be the control register offset from PMC base for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Required properties for device clocks:
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+
+Device Clocks
+
+Device clocks are required to have one or both of the following sets of
+properties:
+
+
+Gated device clocks:
+
+Required properties:
+- enable-reg : shall be the register offset from PMC base for the enable
+	register.
+- enable-bit : shall be the bit within enable-reg to enable/disable the clock.
+
+
+Divisor device clocks:
+
+Required property:
+- divisor-reg : shall be the register offset from PMC base for the divisor
+	register.
+Optional property:
+- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f
+	if not specified.
+
+
+For example:
+
+ref25: ref25M {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <25000000>;
+};
+
+plla: plla {
+	#clock-cells = <0>;
+	compatible = "wm,wm8650-pll-clock";
+	clocks = <&ref25>;
+	reg = <0x200>;
+};
+
+sdhc: sdhc {
+	#clock-cells = <0>;
+	compatible = "via,vt8500-device-clock";
+	clocks = <&pllb>;
+	divisor-reg = <0x328>;
+	divisor-mask = <0x3f>;
+	enable-reg = <0x254>;
+	enable-bit = <18>;
+};
diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
new file mode 100644
index 0000000000..8233e77171
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -0,0 +1,131 @@
+Device Tree Clock bindings for APM X-Gene
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
+	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-pmd-clock" - for a X-Gene PMD clock
+	"apm,xgene-device-clock" - for a X-Gene device clock
+	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
+	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
+
+Required properties for SoC or PCP PLL clocks:
+- reg : shall be the physical PLL register address for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the PLL referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the PLL. If missing, use the device name.
+
+Required properties for PMD clocks:
+- reg : shall be the physical register address for the pmd clock.
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the clock referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the clock. If missing, use the device name.
+
+Required properties for device clocks:
+- reg : shall be a list of address and length pairs describing the CSR
+         reset and/or the divider. Either may be omitted, but at least
+         one must be present.
+ - reg-names : shall be a string list describing the reg resource. This
+               may include "csr-reg" and/or "div-reg". If this property
+               is not present, the reg property is assumed to describe
+               only "csr-reg".
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the device referenced.
+Optional properties for device clocks:
+- clock-names : shall be the name of the device clock. If missing, use the
+                device name.
+- csr-offset : Offset to the CSR reset register from the reset address base.
+               Default is 0.
+- csr-mask : CSR reset mask bit. Default is 0xF.
+- enable-offset : Offset to the enable register from the reset address base.
+                  Default is 0x8.
+- enable-mask : CSR enable mask bit. Default is 0xF.
+- divider-offset : Offset to the divider CSR register from the divider base.
+                   Default is 0x0.
+- divider-width : Width of the divider register. Default is 0.
+- divider-shift : Bit shift of the divider register. Default is 0.
+
+For example:
+
+	pcppll: pcppll@17000100 {
+		compatible = "apm,xgene-pcppll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "pcppll";
+		reg = <0x0 0x17000100 0x0 0x1000>;
+		clock-output-names = "pcppll";
+		type = <0>;
+	};
+
+	pmd0clk: pmd0clk@7e200200 {
+		compatible = "apm,xgene-pmd-clock";
+		#clock-cells = <1>;
+		clocks = <&pmdpll 0>;
+		reg = <0x0 0x7e200200 0x0 0x10>;
+		clock-output-names = "pmd0clk";
+	};
+
+	socpll: socpll@17000120 {
+		compatible = "apm,xgene-socpll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "socpll";
+		reg = <0x0 0x17000120 0x0 0x1000>;
+		clock-output-names = "socpll";
+		type = <1>;
+	};
+
+	qmlclk: qmlclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "qmlclk";
+		reg = <0x0 0x1703C000 0x0 0x1000>;
+		reg-name = "csr-reg";
+		clock-output-names = "qmlclk";
+	};
+
+	ethclk: ethclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "ethclk";
+		reg = <0x0 0x17000000 0x0 0x1000>;
+		reg-names = "div-reg";
+		divider-offset = <0x238>;
+		divider-width = <0x9>;
+		divider-shift = <0x0>;
+		clock-output-names = "ethclk";
+	};
+
+	apbclk: apbclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&ahbclk 0>;
+		clock-names = "apbclk";
+		reg = <0x0 0x1F2AC000 0x0 0x1000
+			0x0 0x1F2AC000 0x0 0x1000>;
+		reg-names = "csr-reg", "div-reg";
+		csr-offset = <0x0>;
+		csr-mask = <0x200>;
+		enable-offset = <0x8>;
+		enable-mask = <0x200>;
+		divider-offset = <0x10>;
+		divider-width = <0x2>;
+		divider-shift = <0x0>;
+		flags = <0x8>;
+		clock-output-names = "apbclk";
+	};
+
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
new file mode 100644
index 0000000000..02bd556bd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
new file mode 100644
index 0000000000..1ba687d433
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,versal-clk.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal clock controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  The clock controller is a hardware block of Xilinx versal clock tree. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  provider for all clock consumers of PS clocks.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - xlnx,versal-clk
+          - xlnx,zynqmp-clk
+      - items:
+          - enum:
+              - xlnx,versal-net-clk
+          - const: xlnx,versal-clk
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: List of clock specifiers which are external input
+      clocks to the given clock controller.
+    minItems: 3
+    maxItems: 8
+
+  clock-names:
+    minItems: 3
+    maxItems: 8
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,versal-clk
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: alternate reference clock
+            - description: alternate reference clock for programmable logic
+
+        clock-names:
+          items:
+            - const: ref
+            - const: alt_ref
+            - const: pl_alt_ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-clk
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          items:
+            - description: PS reference clock
+            - description: reference clock for video system
+            - description: alternative PS reference clock
+            - description: auxiliary reference clock
+            - description: transceiver reference clock
+            - description: (E)MIO clock source  (Optional clock)
+            - description: GEM emio clock  (Optional clock)
+            - description: Watchdog external clock (Optional clock)
+
+        clock-names:
+          minItems: 5
+          items:
+            - const: pss_ref_clk
+            - const: video_clk
+            - const: pss_alt_ref_clk
+            - const: aux_ref_clk
+            - const: gt_crx_ref_clk
+            - pattern: "^mio_clk[00-77]+.*$"
+            - pattern: "gem[0-3]+_emio_clk.*$"
+            - pattern: "swdt[0-1]+_ext_clk.*$"
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        compatible = "xlnx,zynqmp-firmware";
+        method = "smc";
+        versal_clk: clock-controller {
+          #clock-cells = <1>;
+          compatible = "xlnx,versal-clk";
+          clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+          clock-names = "ref", "alt_ref", "pl_alt_ref";
+        };
+      };
+    };
+
+    clock-controller {
+        #clock-cells = <1>;
+        compatible = "xlnx,zynqmp-clk";
+        clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+                 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+        clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+                      "aux_ref_clk", "gt_crx_ref_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
new file mode 100644
index 0000000000..d93746cf29
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -0,0 +1,110 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== Clock Controller ==
+The clock controller is a logical abstraction of Zynq's clock tree. It reads
+required input clock frequencies from the devicetree and acts as clock provider
+for all clock consumers of PS clocks.
+
+Required properties:
+ - #clock-cells : Must be 1
+ - compatible : "xlnx,ps7-clkc"
+ - reg : SLCR offset and size taken via syscon < 0x100 0x100 >
+ - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
+		      (usually 33 MHz oscillators are used for Zynq platforms)
+ - clock-output-names : List of strings used to name the clock outputs. Shall be
+			a list of the outputs given below.
+
+Optional properties:
+ - clocks : as described in the clock bindings
+ - clock-names : as described in the clock bindings
+ - fclk-enable : Bit mask to enable FCLKs statically at boot time.
+		 Bit [0..3] correspond to FCLK0..FCLK3. The corresponding
+		 FCLK will only be enabled if it is actually running at
+		 boot time.
+
+Clock inputs:
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source.
+ - swdt_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - mio_clk_XX		# with XX = 00..53
+...
+
+Clock outputs:
+ 0:  armpll
+ 1:  ddrpll
+ 2:  iopll
+ 3:  cpu_6or4x
+ 4:  cpu_3or2x
+ 5:  cpu_2x
+ 6:  cpu_1x
+ 7:  ddr2x
+ 8:  ddr3x
+ 9:  dci
+ 10: lqspi
+ 11: smc
+ 12: pcap
+ 13: gem0
+ 14: gem1
+ 15: fclk0
+ 16: fclk1
+ 17: fclk2
+ 18: fclk3
+ 19: can0
+ 20: can1
+ 21: sdio0
+ 22: sdio1
+ 23: uart0
+ 24: uart1
+ 25: spi0
+ 26: spi1
+ 27: dma
+ 28: usb0_aper
+ 29: usb1_aper
+ 30: gem0_aper
+ 31: gem1_aper
+ 32: sdio0_aper
+ 33: sdio1_aper
+ 34: spi0_aper
+ 35: spi1_aper
+ 36: can0_aper
+ 37: can1_aper
+ 38: i2c0_aper
+ 39: i2c1_aper
+ 40: uart0_aper
+ 41: uart1_aper
+ 42: gpio_aper
+ 43: lqspi_aper
+ 44: smc_aper
+ 45: swdt
+ 46: dbg_trc
+ 47: dbg_apb
+
+Example:
+	clkc: clkc@100 {
+		#clock-cells = <1>;
+		compatible = "xlnx,ps7-clkc";
+		ps-clk-frequency = <33333333>;
+		reg = <0x100 0x100>;
+		clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+				"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+				"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+				"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+				"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+				"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+				"gem1_aper", "sdio0_aper", "sdio1_aper",
+				"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+				"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+				"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+				"dbg_trc", "dbg_apb";
+		# optional props
+		clocks = <&clkc 16>, <&clk_foo>;
+		clock-names = "gem1_emio_clk", "can_mio_clk_23";
+	};
diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt
new file mode 100644
index 0000000000..98a28130e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/common-properties.txt
@@ -0,0 +1,85 @@
+Common properties
+=================
+
+Endianness
+----------
+
+The Devicetree Specification does not define any properties related to hardware
+byte swapping, but endianness issues show up frequently in porting drivers to
+different machine types.  This document attempts to provide a consistent
+way of handling byte swapping across drivers.
+
+Optional properties:
+ - big-endian: Boolean; force big endian register accesses
+   unconditionally (e.g. ioread32be/iowrite32be).  Use this if you
+   know the peripheral always needs to be accessed in big endian (BE) mode.
+ - little-endian: Boolean; force little endian register accesses
+   unconditionally (e.g. readl/writel).  Use this if you know the
+   peripheral always needs to be accessed in little endian (LE) mode.
+ - native-endian: Boolean; always use register accesses matched to the
+   endianness of the kernel binary (e.g. LE vmlinux -> readl/writel,
+   BE vmlinux -> ioread32be/iowrite32be).  In this case no byte swaps
+   will ever be performed.  Use this if the hardware "self-adjusts"
+   register endianness based on the CPU's configured endianness.
+
+If a binding supports these properties, then the binding should also
+specify the default behavior if none of these properties are present.
+In such cases, little-endian is the preferred default, but it is not
+a requirement.  Some implementations assume that little-endian is
+the default, because most existing (PCI-based) drivers implicitly
+default to LE for their MMIO accesses.
+
+Examples:
+Scenario 1 : CPU in LE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      native-endian;
+};
+
+Scenario 2 : CPU in LE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      big-endian;
+};
+
+Scenario 3 : CPU in BE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      native-endian;
+};
+
+Scenario 4 : CPU in BE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      little-endian;
+};
+
+Daisy-chained devices
+---------------------
+
+Many serially-attached GPIO and IIO devices are daisy-chainable.  To the
+host controller, a daisy-chain appears as a single device, but the number
+of inputs and outputs it provides is the sum of inputs and outputs provided
+by all of its devices.  The driver needs to know how many devices the
+daisy-chain comprises to determine the amount of data exchanged, how many
+inputs and outputs to register and so on.
+
+Optional properties:
+ - #daisy-chained-devices: Number of devices in the daisy-chain (default is 1).
+
+Example:
+gpio@0 {
+	      compatible = "name";
+	      reg = <0>;
+	      gpio-controller;
+	      #gpio-cells = <2>;
+	      #daisy-chained-devices = <3>;
+};
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
new file mode 100644
index 0000000000..7c8a3e8430
--- /dev/null
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -0,0 +1,416 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Connector
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  A USB connector node represents a physical USB connector. It should be a child
+  of a USB interface controller or a separate node when it is attached to both
+  MUX and USB interface controller.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - usb-a-connector
+          - usb-b-connector
+          - usb-c-connector
+
+      - items:
+          - const: gpio-usb-b-connector
+          - const: usb-b-connector
+
+      - items:
+          - const: samsung,usb-connector-11pin
+          - const: usb-b-connector
+
+  reg:
+    maxItems: 1
+
+  label:
+    description: Symbolic name for the connector.
+
+  type:
+    description: Size of the connector, should be specified in case of
+      non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
+      connectors.
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - mini
+      - micro
+
+  self-powered:
+    description: Set this property if the USB device has its own power source.
+    type: boolean
+
+  # The following are optional properties for "usb-b-connector".
+  id-gpios:
+    description: An input gpio for USB ID pin.
+    maxItems: 1
+
+  vbus-gpios:
+    description: An input gpio for USB VBus pin, used to detect presence of
+      VBUS 5V.
+    maxItems: 1
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS if needed when host
+      mode or dual role mode is supported.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+
+  # The following are optional properties for "usb-c-connector".
+  power-role:
+    description: Determines the power role that the Type C connector will
+      support. "dual" refers to Dual Role Port (DRP).
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - source
+      - sink
+      - dual
+
+  try-power-role:
+    description: Preferred power role.
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - source
+      - sink
+      - dual
+
+  data-role:
+    description: Data role if Type C connector supports USB data. "dual" refers
+      Dual Role Device (DRD).
+    $ref: /schemas/types.yaml#/definitions/string
+
+    enum:
+      - host
+      - device
+      - dual
+
+  typec-power-opmode:
+    description: Determines the power operation mode that the Type C connector
+      will support and will advertise through CC pins when it has no power
+      delivery support.
+      - "default" corresponds to default USB voltage and current defined by the
+        USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
+        5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
+        operation respectively.
+      - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
+        Type-C Cable and Connector specification, when Power Delivery is not
+        supported.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - default
+      - 1.5A
+      - 3.0A
+
+  pd-disable:
+    description: Set this property if the Type-C connector has no power delivery support.
+    type: boolean
+
+  # The following are optional properties for "usb-c-connector" with power
+  # delivery support.
+  source-pdos:
+    description: An array of u32 with each entry providing supported power
+      source data object(PDO), the detailed bit definitions of PDO can be found
+      in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
+      Source_Capabilities Message, the order of each entry(PDO) should follow
+      the PD spec chapter 6.4.1. Required for power source and power dual role.
+      User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
+      defined in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-pdos:
+    description: An array of u32 with each entry providing supported power sink
+      data object(PDO), the detailed bit definitions of PDO can be found in
+      "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
+      Sink Capabilities Message, the order of each entry(PDO) should follow the
+      PD spec chapter 6.4.1. Required for power sink and power dual role. User
+      can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
+      in dt-bindings/usb/pd.h.
+    minItems: 1
+    maxItems: 7
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-vdos:
+    description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
+      providing additional information corresponding to the product, the detailed bit
+      definitions and the order of each VDO can be found in
+      "USB Power Delivery Specification Revision 3.0, Version 2.0 + ECNs 2020-12-10"
+      chapter 6.4.4.3.1 Discover Identity. User can specify the VDO array via
+      VDO_IDH/_CERT/_PRODUCT/_UFP/_DFP/_PCABLE/_ACABLE(1/2)/_VPD() defined in
+      dt-bindings/usb/pd.h.
+    minItems: 3
+    maxItems: 6
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  sink-vdos-v1:
+    description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),
+      providing additional information corresponding to the product, the detailed bit
+      definitions and the order of each VDO can be found in
+      "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover
+      Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in
+      dt-bindings/usb/pd.h.
+    minItems: 3
+    maxItems: 6
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  op-sink-microwatt:
+    description: Sink required operating power in microwatt, if source can't
+      offer the power, Capability Mismatch is set. Required for power sink and
+      power dual role.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: OF graph bindings modeling a data bus to the connector, e.g.
+      there is a single High Speed (HS) port present in this connector. If there
+      is more than one bus (several port, with 'reg' property), they can be grouped
+      under 'ports'.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: OF graph bindings modeling any data bus to the connector
+      unless the bus is between parent node and the connector. Since a single
+      connector can have multiple data buses every bus has an assigned OF graph
+      port number as described below.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS), present in all connectors.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS), present in SS capable connectors.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sideband Use (SBU), present in USB-C. This describes the
+          alternate mode connection of which SBU is a part.
+
+    required:
+      - port@0
+
+  new-source-frs-typec-current:
+    description: Initial current capability of the new source when vSafe5V
+      is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
+      of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the
+      different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"
+      provides a detailed description of the field. The sink PDO from current source
+      reflects the current source's(i.e. transmitter of the FRS signal) power
+      requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
+      a.k.a new source, should check if it will be able to satisfy the current source's,
+      new sink's, requirement during frswap before enabling the frs signal reception.
+      This property refers to maximum current capability that the current sink can
+      satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit
+      contract, hence, the power level is only a function of the current capability.
+      "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
+      "2" refers to 1.5A@5V.
+      "3" refers to 3.0A@5V.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+  slow-charger-loop:
+    description: Allows PMIC charger loops which are slow(i.e. cannot meet the 15ms deadline) to
+      still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby
+      state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
+      Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W -
+      5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during
+      SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during
+      SNK_READY for non-pd link.
+    type: boolean
+
+dependencies:
+  sink-vdos-v1: [ sink-vdos ]
+  sink-vdos: [ sink-vdos-v1 ]
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: gpio-usb-b-connector
+    then:
+      anyOf:
+        - required:
+            - vbus-gpios
+        - required:
+            - id-gpios
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,usb-connector-11pin
+    then:
+      properties:
+        type:
+          const: micro
+
+anyOf:
+  - not:
+      required:
+        - typec-power-opmode
+        - new-source-frs-typec-current
+
+additionalProperties: false
+
+examples:
+  # Micro-USB connector with HS lines routed via controller (MUIC).
+  - |
+    muic-max77843 {
+        usb_con1: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
+    };
+
+  # USB-C connector attached to CC controller (s2mm005), HS lines routed
+  # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
+  # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+  - |
+    ccic: s2mm005 {
+        usb_con2: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    usb_con_hs: endpoint {
+                        remote-endpoint = <&max77865_usbc_hs>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&usbdrd_phy_ss>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&dp_aux>;
+                    };
+                };
+            };
+        };
+    };
+
+  # USB-C connector attached to a typec port controller(ptn5110), which has
+  # power delivery support and enables drp.
+  - |
+    #include <dt-bindings/usb/pd.h>
+    typec: ptn5110 {
+        usb_con3: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                         PDO_VAR(5000, 12000, 2000)>;
+            op-sink-microwatt = <10000000>;
+        };
+    };
+
+  # USB-C connector attached to SoC with a single High-Speed controller
+  - |
+    connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+
+        port {
+            high_speed_ep: endpoint {
+                remote-endpoint = <&usb_hs_ep>;
+            };
+        };
+    };
+
+  # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
+  # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and
+  # the output of MUX is connected to the SoC.
+  - |
+    connector {
+        compatible = "usb-c-connector";
+        label = "USB-C";
+        data-role = "dual";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                hs_ep: endpoint {
+                    remote-endpoint = <&usb3_hs_ep>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                ss_ep: endpoint {
+                    remote-endpoint = <&hd3ss3220_in_ep>;
+                };
+            };
+        };
+    };
+
+  # USB connector with GPIO control lines
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
+    };
+
+  # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
+  # lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based
+  # mobile phone
+  - |
+    muic-max77843 {
+        usb_con4: connector {
+            compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    muic_to_usb: endpoint {
+                        remote-endpoint = <&usb_to_muic>;
+                    };
+                };
+                port@3 {
+                    reg = <3>;
+                    usb_con_mhl: endpoint {
+                        remote-endpoint = <&sii8620_mhl>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
new file mode 100644
index 0000000000..4d18cd7220
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
@@ -0,0 +1,18 @@
+FlexTimer Quadrature decoder counter
+
+This driver exposes a simple counter for the quadrature decoder mode.
+
+Required properties:
+- compatible:		Must be "fsl,ftm-quaddec".
+- reg:			Must be set to the memory region of the flextimer.
+
+Optional property:
+- big-endian:		Access the device registers in big-endian mode.
+
+Example:
+		counter0: counter@29d0000 {
+			compatible = "fsl,ftm-quaddec";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			big-endian;
+			status = "disabled";
+		};
diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
new file mode 100644
index 0000000000..fd075d1046
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic interrupt counter to measure interrupt frequency. It was developed
+  and used for agricultural devices to measure rotation speed of wheels or
+  other tools. Since the direction of rotation is not important, only one
+  signal line is needed.
+  Interrupts or gpios are required. If both are defined, the interrupt will
+  take precedence for counting interrupts.
+
+properties:
+  compatible:
+    const: interrupt-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required: [ interrupts-extended ]
+  - required: [ interrupts ]
+  - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "interrupt-counter";
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    counter-2 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 0000000000..4e0b2d2b30
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
new file mode 100644
index 0000000000..85f1ff83af
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+properties:
+  compatible:
+    const: ti,am3352-eqep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The eQEP event interrupt
+    maxItems: 1
+
+  clocks:
+    description: The clock that determines the SYSCLKOUT rate for the eQEP
+      peripheral.
+    maxItems: 1
+
+  clock-names:
+    const: sysclkout
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    eqep0: counter@180 {
+        compatible = "ti,am3352-eqep";
+        reg = <0x180 0x80>;
+        clocks = <&l4ls_gclk>;
+        clock-names = "sysclkout";
+        interrupts = <79>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/cpu/cpu-capacity.txt b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
new file mode 100644
index 0000000000..f28e1adad4
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
@@ -0,0 +1,238 @@
+==========================================
+CPU capacity bindings
+==========================================
+
+==========================================
+1 - Introduction
+==========================================
+
+Some systems may be configured to have cpus with different power/performance
+characteristics within the same chip. In this case, additional information has
+to be made available to the kernel for it to be aware of such differences and
+take decisions accordingly.
+
+==========================================
+2 - CPU capacity definition
+==========================================
+
+CPU capacity is a number that provides the scheduler information about CPUs
+heterogeneity. Such heterogeneity can come from micro-architectural differences
+(e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run
+(e.g., SMP systems with multiple frequency domains). Heterogeneity in this
+context is about differing performance characteristics; this binding tries to
+capture a first-order approximation of the relative performance of CPUs.
+
+CPU capacities are obtained by running a suitable benchmark. This binding makes
+no guarantees on the validity or suitability of any particular benchmark, the
+final capacity should, however, be:
+
+* A "single-threaded" or CPU affine benchmark
+* Divided by the running frequency of the CPU executing the benchmark
+* Not subject to dynamic frequency scaling of the CPU
+
+For the time being we however advise usage of the Dhrystone benchmark. What
+above thus becomes:
+
+CPU capacities are obtained by running the Dhrystone benchmark on each CPU at
+max frequency (with caches enabled). The obtained DMIPS score is then divided
+by the frequency (in MHz) at which the benchmark has been run, so that
+DMIPS/MHz are obtained.  Such values are then normalized w.r.t. the highest
+score obtained in the system.
+
+==========================================
+3 - capacity-dmips-mhz
+==========================================
+
+capacity-dmips-mhz is an optional cpu node [1] property: u32 value
+representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the
+maximum frequency available to the cpu is then used to calculate the capacity
+value internally used by the kernel.
+
+capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu
+node, it has to be specified for every other cpu nodes, or the system will
+fall back to the default capacity value for every CPU. If cpufreq is not
+available, final capacities are calculated by directly using capacity-dmips-
+mhz values (normalized w.r.t. the highest value found while parsing the DT).
+
+===========================================
+4 - Examples
+===========================================
+
+Example 1 (ARM 64-bit, 6-cpu system, two clusters):
+The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
+are 1024 and 578 for cluster0 and cluster1. Further normalization
+is done by the operating system based on cluster0@max-freq=1100 and
+cluster1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (578*850/1100).
+
+cpus {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&A57_0>;
+			};
+			core1 {
+				cpu = <&A57_1>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&A53_0>;
+			};
+			core1 {
+				cpu = <&A53_1>;
+			};
+			core2 {
+				cpu = <&A53_2>;
+			};
+			core3 {
+				cpu = <&A53_3>;
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		CPU_SLEEP_0: cpu-sleep-0 {
+			compatible = "arm,idle-state";
+			arm,psci-suspend-param = <0x0010000>;
+			local-timer-stop;
+			entry-latency-us = <100>;
+			exit-latency-us = <250>;
+			min-residency-us = <150>;
+		};
+
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "arm,idle-state";
+			arm,psci-suspend-param = <0x1010000>;
+			local-timer-stop;
+			entry-latency-us = <800>;
+			exit-latency-us = <700>;
+			min-residency-us = <2500>;
+		};
+	};
+
+	A57_0: cpu@0 {
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		device_type = "cpu";
+		enable-method = "psci";
+		next-level-cache = <&A57_L2>;
+		clocks = <&scpi_dvfs 0>;
+		cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		capacity-dmips-mhz = <1024>;
+	};
+
+	A57_1: cpu@1 {
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		device_type = "cpu";
+		enable-method = "psci";
+		next-level-cache = <&A57_L2>;
+		clocks = <&scpi_dvfs 0>;
+		cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		capacity-dmips-mhz = <1024>;
+	};
+
+	A53_0: cpu@100 {
+		compatible = "arm,cortex-a53";
+		reg = <0x0 0x100>;
+		device_type = "cpu";
+		enable-method = "psci";
+		next-level-cache = <&A53_L2>;
+		clocks = <&scpi_dvfs 1>;
+		cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		capacity-dmips-mhz = <578>;
+	};
+
+	A53_1: cpu@101 {
+		compatible = "arm,cortex-a53";
+		reg = <0x0 0x101>;
+		device_type = "cpu";
+		enable-method = "psci";
+		next-level-cache = <&A53_L2>;
+		clocks = <&scpi_dvfs 1>;
+		cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		capacity-dmips-mhz = <578>;
+	};
+
+	A53_2: cpu@102 {
+		compatible = "arm,cortex-a53";
+		reg = <0x0 0x102>;
+		device_type = "cpu";
+		enable-method = "psci";
+		next-level-cache = <&A53_L2>;
+		clocks = <&scpi_dvfs 1>;
+		cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		capacity-dmips-mhz = <578>;
+	};
+
+	A53_3: cpu@103 {
+		compatible = "arm,cortex-a53";
+		reg = <0x0 0x103>;
+		device_type = "cpu";
+		enable-method = "psci";
+		next-level-cache = <&A53_L2>;
+		clocks = <&scpi_dvfs 1>;
+		cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		capacity-dmips-mhz = <578>;
+	};
+
+	A57_L2: l2-cache0 {
+		compatible = "cache";
+	};
+
+	A53_L2: l2-cache1 {
+		compatible = "cache";
+	};
+};
+
+Example 2 (ARM 32-bit, 4-cpu system, two clusters,
+	   cpus 0,1@1GHz, cpus 2,3@500MHz):
+capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first
+cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency)
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0>;
+		capacity-dmips-mhz = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <1>;
+		capacity-dmips-mhz = <2>;
+	};
+
+	cpu2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x100>;
+		capacity-dmips-mhz = <1>;
+	};
+
+	cpu3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x101>;
+		capacity-dmips-mhz = <1>;
+	};
+};
+
+===========================================
+5 - References
+===========================================
+
+[1] ARM Linux Kernel documentation - CPUs bindings
+    Documentation/devicetree/bindings/arm/cpus.yaml
diff --git a/Documentation/devicetree/bindings/cpu/cpu-topology.txt b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
new file mode 100644
index 0000000000..9bd530a35d
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
@@ -0,0 +1,553 @@
+===========================================
+CPU topology binding description
+===========================================
+
+===========================================
+1 - Introduction
+===========================================
+
+In a SMP system, the hierarchy of CPUs is defined through three entities that
+are used to describe the layout of physical CPUs in the system:
+
+- socket
+- cluster
+- core
+- thread
+
+The bottom hierarchy level sits at core or thread level depending on whether
+symmetric multi-threading (SMT) is supported or not.
+
+For instance in a system where CPUs support SMT, "cpu" nodes represent all
+threads existing in the system and map to the hierarchy level "thread" above.
+In systems where SMT is not supported "cpu" nodes represent all cores present
+in the system and map to the hierarchy level "core" above.
+
+CPU topology bindings allow one to associate cpu nodes with hierarchical groups
+corresponding to the system hierarchy; syntactically they are defined as device
+tree nodes.
+
+Currently, only ARM/RISC-V intend to use this cpu topology binding but it may be
+used for any other architecture as well.
+
+The cpu nodes, as per bindings defined in [4], represent the devices that
+correspond to physical CPUs and are to be mapped to the hierarchy levels.
+
+A topology description containing phandles to cpu nodes that are not compliant
+with bindings standardized in [4] is therefore considered invalid.
+
+===========================================
+2 - cpu-map node
+===========================================
+
+The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct
+child of the cpus node and provides a container where the actual topology
+nodes are listed.
+
+- cpu-map node
+
+	Usage: Optional - On SMP systems provide CPUs topology to the OS.
+			  Uniprocessor systems do not require a topology
+			  description and therefore should not define a
+			  cpu-map node.
+
+	Description: The cpu-map node is just a container node where its
+		     subnodes describe the CPU topology.
+
+	Node name must be "cpu-map".
+
+	The cpu-map node's parent node must be the cpus node.
+
+	The cpu-map node's child nodes can be:
+
+	- one or more cluster nodes or
+	- one or more socket nodes in a multi-socket system
+
+	Any other configuration is considered invalid.
+
+The cpu-map node can only contain 4 types of child nodes:
+
+- socket node
+- cluster node
+- core node
+- thread node
+
+whose bindings are described in paragraph 3.
+
+The nodes describing the CPU topology (socket/cluster/core/thread) can
+only be defined within the cpu-map node and every core/thread in the
+system must be defined within the topology.  Any other configuration is
+invalid and therefore must be ignored.
+
+===========================================
+2.1 - cpu-map child nodes naming convention
+===========================================
+
+cpu-map child nodes must follow a naming convention where the node name
+must be "socketN", "clusterN", "coreN", "threadN" depending on the node type
+(ie socket/cluster/core/thread) (where N = {0, 1, ...} is the node number; nodes
+which are siblings within a single common parent node must be given a unique and
+sequential N value, starting from 0).
+cpu-map child nodes which do not share a common parent node can have the same
+name (ie same number N as other cpu-map child nodes at different device tree
+levels) since name uniqueness will be guaranteed by the device tree hierarchy.
+
+===========================================
+3 - socket/cluster/core/thread node bindings
+===========================================
+
+Bindings for socket/cluster/cpu/thread nodes are defined as follows:
+
+- socket node
+
+	 Description: must be declared within a cpu-map node, one node
+		      per physical socket in the system. A system can
+		      contain single or multiple physical socket.
+		      The association of sockets and NUMA nodes is beyond
+		      the scope of this bindings, please refer [2] for
+		      NUMA bindings.
+
+	This node is optional for a single socket system.
+
+	The socket node name must be "socketN" as described in 2.1 above.
+	A socket node can not be a leaf node.
+
+	A socket node's child nodes must be one or more cluster nodes.
+
+	Any other configuration is considered invalid.
+
+- cluster node
+
+	 Description: must be declared within a cpu-map node, one node
+		      per cluster. A system can contain several layers of
+		      clustering within a single physical socket and cluster
+		      nodes can be contained in parent cluster nodes.
+
+	The cluster node name must be "clusterN" as described in 2.1 above.
+	A cluster node can not be a leaf node.
+
+	A cluster node's child nodes must be:
+
+	- one or more cluster nodes; or
+	- one or more core nodes
+
+	Any other configuration is considered invalid.
+
+- core node
+
+	Description: must be declared in a cluster node, one node per core in
+		     the cluster. If the system does not support SMT, core
+		     nodes are leaf nodes, otherwise they become containers of
+		     thread nodes.
+
+	The core node name must be "coreN" as described in 2.1 above.
+
+	A core node must be a leaf node if SMT is not supported.
+
+	Properties for core nodes that are leaf nodes:
+
+	- cpu
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle to the cpu node that corresponds to the
+			    core node.
+
+	If a core node is not a leaf node (CPUs supporting SMT) a core node's
+	child nodes can be:
+
+	- one or more thread nodes
+
+	Any other configuration is considered invalid.
+
+- thread node
+
+	Description: must be declared in a core node, one node per thread
+		     in the core if the system supports SMT. Thread nodes are
+		     always leaf nodes in the device tree.
+
+	The thread node name must be "threadN" as described in 2.1 above.
+
+	A thread node must be a leaf node.
+
+	A thread node must contain the following property:
+
+	- cpu
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle to the cpu node that corresponds to
+			    the thread node.
+
+===========================================
+4 - Example dts
+===========================================
+
+Example 1 (ARM 64-bit, 16-cpu system, two clusters of clusters in a single
+physical socket):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <2>;
+
+	cpu-map {
+		socket0 {
+			cluster0 {
+				cluster0 {
+					core0 {
+						thread0 {
+							cpu = <&CPU0>;
+						};
+						thread1 {
+							cpu = <&CPU1>;
+						};
+					};
+
+					core1 {
+						thread0 {
+							cpu = <&CPU2>;
+						};
+						thread1 {
+							cpu = <&CPU3>;
+						};
+					};
+				};
+
+				cluster1 {
+					core0 {
+						thread0 {
+							cpu = <&CPU4>;
+						};
+						thread1 {
+							cpu = <&CPU5>;
+						};
+					};
+
+					core1 {
+						thread0 {
+							cpu = <&CPU6>;
+						};
+						thread1 {
+							cpu = <&CPU7>;
+						};
+					};
+				};
+			};
+
+			cluster1 {
+				cluster0 {
+					core0 {
+						thread0 {
+							cpu = <&CPU8>;
+						};
+						thread1 {
+							cpu = <&CPU9>;
+						};
+					};
+					core1 {
+						thread0 {
+							cpu = <&CPU10>;
+						};
+						thread1 {
+							cpu = <&CPU11>;
+						};
+					};
+				};
+
+				cluster1 {
+					core0 {
+						thread0 {
+							cpu = <&CPU12>;
+						};
+						thread1 {
+							cpu = <&CPU13>;
+						};
+					};
+					core1 {
+						thread0 {
+							cpu = <&CPU14>;
+						};
+						thread1 {
+							cpu = <&CPU15>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU4: cpu@10000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU5: cpu@10001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU6: cpu@10100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU7: cpu@10101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU8: cpu@100000000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x0>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU9: cpu@100000001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x1>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU10: cpu@100000100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU11: cpu@100000101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU12: cpu@100010000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10000>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU13: cpu@100010001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10001>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU14: cpu@100010100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10100>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+
+	CPU15: cpu@100010101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1 0x10101>;
+		enable-method = "spin-table";
+		cpu-release-addr = <0 0x20000000>;
+	};
+};
+
+Example 2 (ARM 32-bit, dual-cluster, 8-cpu system, no SMT):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <1>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&CPU0>;
+			};
+			core1 {
+				cpu = <&CPU1>;
+			};
+			core2 {
+				cpu = <&CPU2>;
+			};
+			core3 {
+				cpu = <&CPU3>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&CPU4>;
+			};
+			core1 {
+				cpu = <&CPU5>;
+			};
+			core2 {
+				cpu = <&CPU6>;
+			};
+			core3 {
+				cpu = <&CPU7>;
+			};
+		};
+	};
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x0>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x1>;
+	};
+
+	CPU2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x2>;
+	};
+
+	CPU3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x3>;
+	};
+
+	CPU4: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x100>;
+	};
+
+	CPU5: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x101>;
+	};
+
+	CPU6: cpu@102 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x102>;
+	};
+
+	CPU7: cpu@103 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x103>;
+	};
+};
+
+Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system)
+
+{
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu540g", "sifive,fu500";
+	model = "sifive,hifive-unleashed-a00";
+
+	...
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			socket0 {
+				cluster0 {
+					core0 {
+						cpu = <&CPU1>;
+					};
+					core1 {
+						cpu = <&CPU2>;
+					};
+					core2 {
+						cpu0 = <&CPU2>;
+					};
+					core3 {
+						cpu0 = <&CPU3>;
+					};
+				};
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x1>;
+		}
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x2>;
+		}
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x3>;
+		}
+		CPU4: cpu@4 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x4>;
+		}
+	}
+};
+===============================================================================
+[1] ARM Linux kernel documentation
+    Documentation/devicetree/bindings/arm/cpus.yaml
+[2] Devicetree NUMA binding description
+    Documentation/devicetree/bindings/numa.txt
+[3] RISC-V Linux kernel documentation
+    Documentation/devicetree/bindings/riscv/cpus.yaml
+[4] https://www.devicetree.org/specifications/
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
new file mode 100644
index 0000000000..b3a5356f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -0,0 +1,855 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpu/idle-states.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Idle states
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+  - Anup Patel <anup@brainfault.org>
+
+description: |+
+  ==========================================
+  1 - Introduction
+  ==========================================
+
+  ARM and RISC-V systems contain HW capable of managing power consumption
+  dynamically, where cores can be put in different low-power states (ranging
+  from simple wfi to power gating) according to OS PM policies. The CPU states
+  representing the range of dynamic idle states that a processor can enter at
+  run-time, can be specified through device tree bindings representing the
+  parameters required to enter/exit specific idle states on a given processor.
+
+  ==========================================
+  2 - ARM idle states
+  ==========================================
+
+  According to the Server Base System Architecture document (SBSA, [3]), the
+  power states an ARM CPU can be put into are identified by the following list:
+
+  - Running
+  - Idle_standby
+  - Idle_retention
+  - Sleep
+  - Off
+
+  The power states described in the SBSA document define the basic CPU states on
+  top of which ARM platforms implement power management schemes that allow an OS
+  PM implementation to put the processor in different idle states (which include
+  states listed above; "off" state is not an idle state since it does not have
+  wake-up capabilities, hence it is not considered in this document).
+
+  Idle state parameters (e.g. entry latency) are platform specific and need to
+  be characterized with bindings that provide the required information to OS PM
+  code so that it can build the required tables and use them at runtime.
+
+  The device tree binding definition for ARM idle states is the subject of this
+  document.
+
+  ==========================================
+  3 - RISC-V idle states
+  ==========================================
+
+  On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific
+  suspend (or idle) states (ranging from simple WFI, power gating, etc). The
+  RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a
+  standard mechanism for OS to request HART state transitions.
+
+  The platform specific suspend (or idle) states of a hart can be either
+  retentive or non-rententive in nature. A retentive suspend state will
+  preserve HART registers and CSR values for all privilege modes whereas
+  a non-retentive suspend state will not preserve HART registers and CSR
+  values.
+
+  ===========================================
+  4 - idle-states definitions
+  ===========================================
+
+  Idle states are characterized for a specific system through a set of
+  timing and energy related properties, that underline the HW behaviour
+  triggered upon idle states entry and exit.
+
+  The following diagram depicts the CPU execution phases and related timing
+  properties required to enter and exit an idle state:
+
+  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
+              |          |           |          |          |
+
+              |<------ entry ------->|
+              |       latency        |
+                                                |<- exit ->|
+                                                |  latency |
+              |<-------- min-residency -------->|
+                         |<-------  wakeup-latency ------->|
+
+      Diagram 1: CPU idle state execution phases
+
+  EXEC:  Normal CPU execution.
+
+  PREP:  Preparation phase before committing the hardware to idle mode
+    like cache flushing. This is abortable on pending wake-up
+    event conditions. The abort latency is assumed to be negligible
+    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
+    goes back to EXEC. This phase is optional. If not abortable,
+    this should be included in the ENTRY phase instead.
+
+  ENTRY:  The hardware is committed to idle mode. This period must run
+    to completion up to IDLE before anything else can happen.
+
+  IDLE:  This is the actual energy-saving idle period. This may last
+    between 0 and infinite time, until a wake-up event occurs.
+
+  EXIT:  Period during which the CPU is brought back to operational
+    mode (EXEC).
+
+  entry-latency: Worst case latency required to enter the idle state. The
+  exit-latency may be guaranteed only after entry-latency has passed.
+
+  min-residency: Minimum period, including preparation and entry, for a given
+  idle state to be worthwhile energywise.
+
+  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
+  CPU being able to execute normal code again. If not specified, this is assumed
+  to be entry-latency + exit-latency.
+
+  These timing parameters can be used by an OS in different circumstances.
+
+  An idle CPU requires the expected min-residency time to select the most
+  appropriate idle state based on the expected expiry time of the next IRQ
+  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
+
+  An operating system scheduler may need to compute the shortest wake-up delay
+  for CPUs in the system by detecting how long will it take to get a CPU out
+  of an idle state, e.g.:
+
+  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
+
+  In other words, the scheduler can make its scheduling decision by selecting
+  (e.g. waking-up) the CPU with the shortest wake-up delay.
+  The wake-up delay must take into account the entry latency if that period
+  has not expired. The abortable nature of the PREP period can be ignored
+  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
+  the worst case since it depends on the CPU operating conditions, i.e. caches
+  state).
+
+  An OS has to reliably probe the wakeup-latency since some devices can enforce
+  latency constraint guarantees to work properly, so the OS has to detect the
+  worst case wake-up latency it can incur if a CPU is allowed to enter an
+  idle state, and possibly to prevent that to guarantee reliable device
+  functioning.
+
+  The min-residency time parameter deserves further explanation since it is
+  expressed in time units but must factor in energy consumption coefficients.
+
+  The energy consumption of a cpu when it enters a power state can be roughly
+  characterised by the following graph:
+
+                 |
+                 |
+                 |
+             e   |
+             n   |                                      /---
+             e   |                               /------
+             r   |                        /------
+             g   |                  /-----
+             y   |           /------
+                 |       ----
+                 |      /|
+                 |     / |
+                 |    /  |
+                 |   /   |
+                 |  /    |
+                 | /     |
+                 |/      |
+            -----|-------+----------------------------------
+                0|       1                              time(ms)
+
+      Graph 1: Energy vs time example
+
+  The graph is split in two parts delimited by time 1ms on the X-axis.
+  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
+  and denotes the energy costs incurred while entering and leaving the idle
+  state.
+  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
+  shallower slope and essentially represents the energy consumption of the idle
+  state.
+
+  min-residency is defined for a given idle state as the minimum expected
+  residency time for a state (inclusive of preparation and entry) after
+  which choosing that state become the most energy efficient option. A good
+  way to visualise this, is by taking the same graph above and comparing some
+  states energy consumptions plots.
+
+  For sake of simplicity, let's consider a system with two idle states IDLE1,
+  and IDLE2:
+
+            |
+            |
+            |
+            |                                                  /-- IDLE1
+         e  |                                              /---
+         n  |                                         /----
+         e  |                                     /---
+         r  |                                /-----/--------- IDLE2
+         g  |                    /-------/---------
+         y  |        ------------    /---|
+            |       /           /----    |
+            |      /        /---         |
+            |     /    /----             |
+            |    / /---                  |
+            |   ---                      |
+            |  /                         |
+            | /                          |
+            |/                           |                  time
+         ---/----------------------------+------------------------
+            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
+                                         |
+                                  IDLE2-min-residency
+
+      Graph 2: idle states min-residency example
+
+  In graph 2 above, that takes into account idle states entry/exit energy
+  costs, it is clear that if the idle state residency time (i.e. time till next
+  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
+  choice energywise.
+
+  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
+  than IDLE2.
+
+  However, the lower power consumption (i.e. shallower energy curve slope) of
+  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
+  efficient.
+
+  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
+  shallower states in a system with multiple idle states) is defined
+  IDLE2-min-residency and corresponds to the time when energy consumption of
+  IDLE1 and IDLE2 states breaks even.
+
+  The definitions provided in this section underpin the idle states
+  properties specification that is the subject of the following sections.
+
+  ===========================================
+  5 - idle-states node
+  ===========================================
+
+  The processor idle states are defined within the idle-states node, which is
+  a direct child of the cpus node [1] and provides a container where the
+  processor idle states, defined as device tree nodes, are listed.
+
+  On ARM systems, it is a container of processor idle states nodes. If the
+  system does not provide CPU power management capabilities, or the processor
+  just supports idle_standby, an idle-states node is not required.
+
+  ===========================================
+  6 - References
+  ===========================================
+
+  [1] ARM Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/arm/cpus.yaml
+
+  [2] ARM Linux Kernel documentation - PSCI bindings
+      Documentation/devicetree/bindings/arm/psci.yaml
+
+  [3] ARM Server Base System Architecture (SBSA)
+      http://infocenter.arm.com/help/index.jsp
+
+  [4] ARM Architecture Reference Manuals
+      http://infocenter.arm.com/help/index.jsp
+
+  [5] ARM Linux Kernel documentation - Booting AArch64 Linux
+      Documentation/arch/arm64/booting.rst
+
+  [6] RISC-V Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/riscv/cpus.yaml
+
+  [7] RISC-V Supervisor Binary Interface (SBI)
+      http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
+
+properties:
+  $nodename:
+    const: idle-states
+
+  entry-method:
+    description: |
+      Usage and definition depend on ARM architecture version.
+
+      On ARM v8 64-bit this property is required.
+      On ARM 32-bit systems this property is optional
+
+      This assumes that the "enable-method" property is set to "psci" in the cpu
+      node[5] that is responsible for setting up CPU idle management in the OS
+      implementation.
+    const: psci
+
+patternProperties:
+  "^(cpu|cluster)-":
+    type: object
+    description: |
+      Each state node represents an idle state description and must be defined
+      as follows.
+
+      The idle state entered by executing the wfi instruction (idle_standby
+      SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and
+      therefore must not be listed.
+
+      In addition to the properties listed above, a state node may require
+      additional properties specific to the entry-method defined in the
+      idle-states node. Please refer to the entry-method bindings
+      documentation for properties definitions.
+
+    properties:
+      compatible:
+        enum:
+          - arm,idle-state
+          - riscv,idle-state
+
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
+      riscv,sbi-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          suspend_type parameter to pass to the RISC-V SBI HSM suspend call.
+
+          This property is required in idle state nodes of device tree meant
+          for RISC-V systems. For more details on the suspend_type parameter
+          refer the SBI specifiation v0.3 (or higher) [7].
+
+      local-timer-stop:
+        description:
+          If present the CPU local timer control logic is
+             lost on state entry, otherwise it is retained.
+        type: boolean
+
+      entry-latency-us:
+        description:
+          Worst case latency in microseconds required to enter the idle state.
+
+      exit-latency-us:
+        description:
+          Worst case latency in microseconds required to exit the idle state.
+          The exit-latency-us duration may be guaranteed only after
+          entry-latency-us has passed.
+
+      min-residency-us:
+        description:
+          Minimum residency duration in microseconds, inclusive of preparation
+          and entry, for this idle state to be considered worthwhile energy wise
+          (refer to section 2 of this document for a complete description).
+
+      wakeup-latency-us:
+        description: |
+          Maximum delay between the signaling of a wake-up event and the CPU
+          being able to execute normal code again. If omitted, this is assumed
+          to be equal to:
+
+            entry-latency-us + exit-latency-us
+
+          It is important to supply this value on systems where the duration of
+          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
+          systems entry-latency-us + exit-latency-us will exceed
+          wakeup-latency-us by this duration.
+
+      idle-state-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          A string used as a descriptive name for the idle state.
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+additionalProperties: false
+
+examples:
+  - |
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <2>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100000000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        idle-states {
+            entry-method = "psci";
+
+            CPU_RETENTION_0_0: cpu-retention-0-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CLUSTER_RETENTION_0: cluster-retention-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CPU_SLEEP_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_SLEEP_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RETENTION_1_0: cpu-retention-1-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <90>;
+            };
+
+            CLUSTER_RETENTION_1: cluster-retention-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <270>;
+                wakeup-latency-us = <100>;
+            };
+
+            CPU_SLEEP_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <70>;
+                exit-latency-us = <100>;
+                min-residency-us = <300>;
+                wakeup-latency-us = <150>;
+            };
+
+            CLUSTER_SLEEP_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <500>;
+                exit-latency-us = <1200>;
+                min-residency-us = <3500>;
+                wakeup-latency-us = <1300>;
+            };
+        };
+    };
+
+  - |
+    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x1>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@2 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x2>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@3 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x3>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x100>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x101>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@102 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x102>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@103 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x103>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        idle-states {
+            cpu_sleep_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <200>;
+                exit-latency-us = <100>;
+                min-residency-us = <400>;
+                wakeup-latency-us = <250>;
+            };
+
+            cluster_sleep_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <500>;
+                exit-latency-us = <1500>;
+                min-residency-us = <2500>;
+                wakeup-latency-us = <1700>;
+            };
+
+            cpu_sleep_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <300>;
+                exit-latency-us = <500>;
+                min-residency-us = <900>;
+                wakeup-latency-us = <600>;
+            };
+
+            cluster_sleep_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <800>;
+                exit-latency-us = <2000>;
+                min-residency-us = <6500>;
+                wakeup-latency-us = <2300>;
+            };
+        };
+    };
+
+  - |
+    // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x0>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc0: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x1>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc1: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@10 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x10>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc10: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@11 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x11>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc11: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        idle-states {
+            CPU_RET_0_0: cpu-retentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_0_0: cpu-nonretentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_0: cluster-retentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000000>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_0: cluster-nonretentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000000>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RET_1_0: cpu-retentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000010>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_1_0: cpu-nonretentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000010>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_1: cluster-retentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000010>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_1: cluster-nonretentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000010>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml b/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml
new file mode 100644
index 0000000000..16a4489745
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/nvidia,tegra186-ccplex-cluster.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpu/nvidia,tegra186-ccplex-cluster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 CCPLEX Cluster
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra186-ccplex-cluster
+
+  reg:
+    maxItems: 1
+
+  nvidia,bpmp:
+    description: phandle to the BPMP used to query CPU frequency tables
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nvidia,bpmp
+
+examples:
+  - |
+    ccplex@e000000 {
+        compatible = "nvidia,tegra186-ccplex-cluster";
+        reg = <0x0e000000 0x400000>;
+        nvidia,bpmp = <&bpmp>;
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
new file mode 100644
index 0000000000..76cb972666
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC cluster cpufreq device
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of
+  the cluster management register block. This binding uses the standard
+  operating-points-v2 table to define the CPU performance states, with the
+  opp-level property specifying the hardware p-state index for that level.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t8103-cluster-cpufreq
+              - apple,t8112-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+      - items:
+          - const: apple,t6000-cluster-cpufreq
+          - const: apple,t8103-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+
+  reg:
+    maxItems: 1
+
+  '#performance-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#performance-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // This example shows a single CPU per domain and 2 domains,
+    // with two p-states per domain.
+    // Shipping hardware has 2-4 CPUs per domain and 2-6 domains.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "apple,icestorm";
+        device_type = "cpu";
+        reg = <0x0 0x0>;
+        operating-points-v2 = <&ecluster_opp>;
+        performance-domains = <&cpufreq_e>;
+      };
+
+      cpu@10100 {
+        compatible = "apple,firestorm";
+        device_type = "cpu";
+        reg = <0x0 0x10100>;
+        operating-points-v2 = <&pcluster_opp>;
+        performance-domains = <&cpufreq_p>;
+      };
+    };
+
+    ecluster_opp: opp-table-0 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <7500>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <972000000>;
+        opp-level = <2>;
+        clock-latency-ns = <22000>;
+      };
+    };
+
+    pcluster_opp: opp-table-1 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <8000>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <828000000>;
+        opp-level = <2>;
+        clock-latency-ns = <19000>;
+      };
+    };
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      cpufreq_e: performance-controller@210e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x10e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+
+      cpufreq_p: performance-controller@211e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x11e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
new file mode 100644
index 0000000000..ce91a91976
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -0,0 +1,76 @@
+Broadcom AVS mail box and interrupt register bindings
+=====================================================
+
+A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
+references the mailbox register used to communicate with the AVS CPU[1]. The
+second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
+the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
+command sent to it by a driver. Interrupting the AVS CPU is mandatory for
+commands to be processed.
+
+The interface also requires a reference to the AVS host interrupt controller,
+so a driver can react to interrupts generated by the AVS CPU whenever a command
+has been processed. See [2] for more information on the brcm,l2-intc node.
+
+[1] The AVS CPU is an independent co-processor that runs proprietary
+firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
+Adaptive Voltage Scaling.
+
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
+
+
+Node brcm,avs-cpu-data-mem
+--------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-data-mem and
+              should include: one of brcm,bcm7271-avs-cpu-data-mem or
+                              brcm,bcm7268-avs-cpu-data-mem
+- reg: Specifies base physical address and size of the registers.
+- interrupts: The interrupt that the AVS CPU will use to interrupt the host
+              when a command completed.
+- interrupt-names: The name of the interrupt used to interrupt the host.
+
+Optional properties:
+- None
+
+Node brcm,avs-cpu-l2-intr
+-------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-l2-intr and
+              should include: one of brcm,bcm7271-avs-cpu-l2-intr or
+                              brcm,bcm7268-avs-cpu-l2-intr
+- reg: Specifies base physical address and size of the registers.
+
+Optional properties:
+- None
+
+
+Example
+=======
+
+	avs_host_l2_intc: interrupt-controller@f04d1200 {
+		#interrupt-cells = <1>;
+		compatible = "brcm,l2-intc";
+		interrupt-parent = <&intc>;
+		reg = <0xf04d1200 0x48>;
+		interrupt-controller;
+		interrupts = <0x0 0x19 0x0>;
+		interrupt-names = "avs";
+	};
+
+	avs-cpu-data-mem@f04c4000 {
+		compatible = "brcm,bcm7271-avs-cpu-data-mem",
+				"brcm,avs-cpu-data-mem";
+		reg = <0xf04c4000 0x60>;
+		interrupts = <0x1a>;
+		interrupt-parent = <&avs_host_l2_intc>;
+		interrupt-names = "sw_intr";
+	};
+
+	avs-cpu-l2-intr@f04d1100 {
+		compatible = "brcm,bcm7271-avs-cpu-l2-intr",
+				"brcm,avs-cpu-l2-intr";
+		reg = <0xf04d1100 0x10>;
+	};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
new file mode 100644
index 0000000000..1d7e491676
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
@@ -0,0 +1,61 @@
+Generic cpufreq driver
+
+It is a generic DT based cpufreq driver for frequency management.  It supports
+both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share
+clock and voltage across all CPUs.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- None
+
+Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for
+  details. OPPs *must* be supplied either via DT, i.e. this property, or
+  populated at runtime.
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
+- #cooling-cells:
+     Please refer to
+     Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
+
+Examples:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+		#cooling-cells = <2>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a9";
+		reg = <1>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@2 {
+		compatible = "arm,cortex-a9";
+		reg = <2>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@3 {
+		compatible = "arm,cortex-a9";
+		reg = <3>;
+		next-level-cache = <&L2>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
new file mode 100644
index 0000000000..d0aecde2b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek's CPUFREQ
+
+maintainers:
+  - Hector Yuan <hector.yuan@mediatek.com>
+
+description:
+  CPUFREQ HW is a hardware engine used by MediaTek SoCs to
+  manage frequency in hardware. It is capable of controlling
+  frequency for multiple clusters.
+
+properties:
+  compatible:
+    const: mediatek,cpufreq-hw
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      Addresses and sizes for the memory of the HW bases in
+      each frequency domain. Each entry corresponds to
+      a register bank for each frequency domain present.
+
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier.
+      Set const to 1 here for nodes providing multiple
+      performance domains.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#performance-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a55";
+                enable-method = "psci";
+                performance-domains = <&performance 0>;
+                reg = <0x000>;
+            };
+    };
+
+    /* ... */
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
new file mode 100644
index 0000000000..e0a4ba599a
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -0,0 +1,250 @@
+Binding for MediaTek's CPUFreq driver
+=====================================
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
+	generic clock consumer properties.
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
+	for detail.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+- mediatek,cci:
+	Used to confirm the link status between cpufreq and mediatek cci. Because
+	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
+	To prevent the issue of high frequency and low voltage, we need to use this
+	property to make sure mediatek cci is ready.
+	For details of mediatek cci, please refer to
+	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
+- #cooling-cells:
+	For details, please refer to
+	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+
+Example 1 (MT7623 SoC):
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x0>;
+		clocks = <&infracfg CLK_INFRA_CPUSEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table>;
+		#cooling-cells = <2>;
+	};
+	cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x1>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x2>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x3>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+
+Example 2 (MT8173 SoC):
+	cpu_opp_table_a: opp_table_a {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <859000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <908000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <983000>;
+		};
+
+		opp-1105000000 {
+			opp-hz = /bits/ 64 <1105000000>;
+			opp-microvolt = <1009000>;
+		};
+
+		opp-1183000000 {
+			opp-hz = /bits/ 64 <1183000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <1083000>;
+		};
+
+		opp-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <1109000>;
+		};
+
+		opp-1573000000 {
+			opp-hz = /bits/ 64 <1573000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu_opp_table_b: opp_table_b {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <828000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <867000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <927000>;
+		};
+
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <968000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1007000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1612000000 {
+			opp-hz = /bits/ 64 <1612000000>;
+			opp-microvolt = <1049000>;
+		};
+
+		opp-1807000000 {
+			opp-hz = /bits/ 64 <1807000000>;
+			opp-microvolt = <1089000>;
+		};
+
+		opp-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA72SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 0000000000..c1d225fcf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,365 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - enum:
+              - qcom,qcm2290-cpufreq-hw
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm8150-cpufreq-hw
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8775p-cpufreq-epss
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sm6375-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 1
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+      - description: Frequency domain 3 register region
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+      - const: freq-domain3
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: dcvsh-irq-0
+      - const: dcvsh-irq-1
+      - const: dcvsh-irq-2
+      - const: dcvsh-irq-3
+
+  '#freq-domain-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        reg-names:
+          minItems: 1
+          maxItems: 1
+
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+        interrupt-names:
+          minItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm6375-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        # On some SoCs the Prime core shares the LMH irq with Big cores
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+            cache-unified;
+            cache-level = <3>;
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+        #clock-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
new file mode 100644
index 0000000000..f3d44984d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt
@@ -0,0 +1,42 @@
+SPEAr cpufreq driver
+-------------------
+
+SPEAr SoC cpufreq driver for CPU frequency scaling.
+It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
+which share clock across all CPUs.
+
+Required properties:
+- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
+  increasing order.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock, in
+  unit of nanoseconds.
+
+Both required and optional properties listed above must be defined under node
+/cpus/cpu@0.
+
+Examples:
+--------
+cpus {
+
+	<...>
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+
+		<...>
+
+		cpufreq_tbl = < 166000
+				200000
+				250000
+				300000
+				400000
+				500000
+				600000 >;
+	};
+
+	<...>
+
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
new file mode 100644
index 0000000000..6b0b452ace
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
@@ -0,0 +1,89 @@
+Binding for ST's CPUFreq driver
+===============================
+
+ST's CPUFreq driver attempts to read 'process' and 'version' attributes
+from the SoC, then supplies the OPP framework with 'prop' and 'supported
+hardware' information respectively.  The framework is then able to read
+the DT and operate in the usual way.
+
+Frequency Scaling only
+----------------------
+
+No vendor specific driver required for this.
+
+Located in CPU's node:
+
+- operating-points		: [See: ../power/opp-v1.yaml]
+
+Example [safe]
+--------------
+
+cpus {
+	cpu@0 {
+				 /* kHz     uV   */
+		operating-points = <1500000 0
+				    1200000 0
+				    800000  0
+				    500000  0>;
+	};
+};
+
+Dynamic Voltage and Frequency Scaling (DVFS)
+--------------------------------------------
+
+This requires the ST CPUFreq driver to supply 'process' and 'version' info.
+
+Located in CPU's node:
+
+- operating-points-v2		: [See ../power/opp-v2.yaml]
+
+Example [unsafe]
+----------------
+
+cpus {
+	cpu@0 {
+		operating-points-v2	= <&cpu0_opp_table>;
+	};
+};
+
+cpu0_opp_table: opp_table {
+	compatible = "operating-points-v2";
+
+	/* ############################################################### */
+	/* # WARNING: Do not attempt to copy/replicate these nodes,      # */
+	/* #          they are only to be supplied by the bootloader !!! # */
+	/* ############################################################### */
+	opp0 {
+		/*			   Major       Minor       Substrate */
+		/*			   2           all         all       */
+		opp-supported-hw	= <0x00000004  0xffffffff  0xffffffff>;
+		opp-hz			= /bits/ 64 <1500000000>;
+		clock-latency-ns	= <10000000>;
+
+		opp-microvolt-pcode0	= <1200000>;
+		opp-microvolt-pcode1	= <1200000>;
+		opp-microvolt-pcode2	= <1200000>;
+		opp-microvolt-pcode3	= <1200000>;
+		opp-microvolt-pcode4	= <1170000>;
+		opp-microvolt-pcode5	= <1140000>;
+		opp-microvolt-pcode6	= <1100000>;
+		opp-microvolt-pcode7	= <1070000>;
+	};
+
+	opp1 {
+		/*			   Major       Minor       Substrate */
+		/*			   all         all         all       */
+		opp-supported-hw	= <0xffffffff  0xffffffff  0xffffffff>;
+		opp-hz			= /bits/ 64 <1200000000>;
+		clock-latency-ns	= <10000000>;
+
+		opp-microvolt-pcode0	= <1110000>;
+		opp-microvolt-pcode1	= <1150000>;
+		opp-microvolt-pcode2	= <1100000>;
+		opp-microvolt-pcode3	= <1080000>;
+		opp-microvolt-pcode4	= <1040000>;
+		opp-microvolt-pcode5	= <1020000>;
+		opp-microvolt-pcode6	= <980000>;
+		opp-microvolt-pcode7	= <930000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
new file mode 100644
index 0000000000..87bff5add3
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
@@ -0,0 +1,37 @@
+i.MX CPUFreq-DT OPP bindings
+================================
+
+Certain i.MX SoCs support different OPPs depending on the "market segment" and
+"speed grading" value which are written in fuses. These bits are combined with
+the opp-supported-hw values for each OPP to check if the OPP is allowed.
+
+Required properties:
+--------------------
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitmaps indicating:
+  - Supported speed grade mask
+  - Supported market segment mask
+    0: Consumer
+    1: Extended Consumer
+    2: Industrial
+    3: Automotive
+
+Example:
+--------
+
+opp_table {
+	compatible = "operating-points-v2";
+	opp-1000000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		/* grade >= 0, consumer only */
+		opp-supported-hw = <0xf>, <0x3>;
+	};
+
+	opp-1300000000 {
+		opp-hz = /bits/ 64 <1300000000>;
+		opp-microvolt = <1000000>;
+		/* grade >= 1, all segments */
+		opp-supported-hw = <0xe>, <0x7>;
+	};
+}
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
new file mode 100644
index 0000000000..03196d5ea5
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
@@ -0,0 +1,40 @@
+Tegra124 CPU frequency scaling driver bindings
+----------------------------------------------
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - cpu_g: Clock mux for the fast CPU cluster.
+  - pll_x: Fast PLL clocksource.
+  - pll_p: Auxiliary PLL used during fast PLL rate changes.
+  - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+
+Example:
+--------
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0>;
+
+		clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+			 <&tegra_car TEGRA124_CLK_PLL_X>,
+			 <&tegra_car TEGRA124_CLK_PLL_P>,
+			 <&dfll>;
+		clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
+		clock-latency = <300000>;
+	};
+
+	<...>
+};
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
new file mode 100644
index 0000000000..bdbfd7c361
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -0,0 +1,56 @@
+Binding for NVIDIA Tegra20 CPUFreq
+==================================
+
+Required properties:
+- clocks: Must contain an entry for the CPU clock.
+  See ../clocks/clock-bindings.txt for details.
+- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details.
+- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitfields indicating:
+	On Tegra20:
+	1. CPU process ID mask
+	2. SoC speedo ID mask
+
+	On Tegra30:
+	1. CPU process ID mask
+	2. CPU speedo ID mask
+
+	A bitwise AND is performed against these values and if any bit
+	matches, the OPP gets enabled.
+
+- opp-microvolt: CPU voltage triplet.
+
+Optional properties:
+- cpu-supply: Phandle to the CPU power supply.
+
+Example:
+	regulators {
+		cpu_reg: regulator0 {
+			regulator-name = "vdd_cpu";
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp@456000000 {
+			clock-latency-ns = <125000>;
+			opp-microvolt = <825000 825000 1125000>;
+			opp-supported-hw = <0x03 0x0001>;
+			opp-hz = /bits/ 64 <456000000>;
+		};
+
+		...
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			clocks = <&tegra_car TEGRA20_CLK_CCLK>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-supply = <&cpu_reg>;
+			#cooling-cells = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
new file mode 100644
index 0000000000..7e1bb992ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+  For old implementation efuses are parsed to select the correct opp table and
+  voltage and CPR is not supported/used.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq8064
+          - qcom,ipq8074
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
+          - qcom,qcs404
+  required:
+    - compatible
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-kryo-cpu
+        then:
+          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-qcom-level
+        then:
+          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404
+
+    then:
+      properties:
+        cpus:
+          type: object
+
+          patternProperties:
+            '^cpu@[0-9a-f]+$':
+              type: object
+
+              properties:
+                power-domains:
+                  maxItems: 1
+
+                power-domain-names:
+                  items:
+                    - const: cpr
+
+              required:
+                - power-domains
+                - power-domain-names
+
+      patternProperties:
+        '^opp-table(-[a-z0-9]+)?$':
+          if:
+            properties:
+              compatible:
+                const: operating-points-v2-kryo-cpu
+          then:
+            patternProperties:
+              '^opp-?[0-9]+$':
+                required:
+                  - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+        compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
new file mode 100644
index 0000000000..0401c11da8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Security System
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-crypto
+      - items:
+          - const: allwinner,sun5i-a13-crypto
+          - const: allwinner,sun4i-a10-crypto
+      - items:
+          - const: allwinner,sun6i-a31-crypto
+          - const: allwinner,sun4i-a10-crypto
+      - items:
+          - const: allwinner,sun7i-a20-crypto
+          - const: allwinner,sun4i-a10-crypto
+      - const: allwinner,sun8i-a33-crypto
+      - items:
+          - const: allwinner,sun8i-v3s-crypto
+          - const: allwinner,sun8i-a33-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ahb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun6i-a31-crypto
+          - allwinner,sun8i-a33-crypto
+
+then:
+  required:
+    - resets
+    - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto: crypto-engine@1c15000 {
+      compatible = "allwinner,sun4i-a10-crypto";
+      reg = <0x01c15000 0x1000>;
+      interrupts = <86>;
+      clocks = <&ahb_gates 5>, <&ss_clk>;
+      clock-names = "ahb", "mod";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
new file mode 100644
index 0000000000..4287678aa7
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/allwinner,sun8i-ce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Crypto Engine driver
+
+maintainers:
+  - Corentin Labbe <clabbe.montjoie@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-h3-crypto
+      - allwinner,sun8i-r40-crypto
+      - allwinner,sun20i-d1-crypto
+      - allwinner,sun50i-a64-crypto
+      - allwinner,sun50i-h5-crypto
+      - allwinner,sun50i-h6-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus clock
+      - description: Module clock
+      - description: MBus clock
+      - description: TRNG clock (RC oscillator)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+      - const: trng
+    minItems: 2
+
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun20i-d1-crypto
+then:
+  properties:
+    clocks:
+      minItems: 4
+    clock-names:
+      minItems: 4
+else:
+  if:
+    properties:
+      compatible:
+        const: allwinner,sun50i-h6-crypto
+  then:
+    properties:
+      clocks:
+        minItems: 3
+        maxItems: 3
+      clock-names:
+        minItems: 3
+        maxItems: 3
+  else:
+    properties:
+      clocks:
+        maxItems: 2
+      clock-names:
+        maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+    crypto: crypto@1c15000 {
+      compatible = "allwinner,sun8i-h3-crypto";
+      reg = <0x01c15000 0x1000>;
+      interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+      clock-names = "bus", "mod";
+      resets = <&ccu RST_BUS_CE>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ss.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ss.yaml
new file mode 100644
index 0000000000..8a29d36edf
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ss.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/allwinner,sun8i-ss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Security System v2 driver
+
+maintainers:
+  - Corentin Labbe <corentin.labbe@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-crypto
+      - allwinner,sun9i-a80-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    crypto: crypto@1c15000 {
+      compatible = "allwinner,sun8i-a83t-crypto";
+      reg = <0x01c15000 0x1000>;
+      interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+      resets = <&ccu RST_BUS_SS>;
+      clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+      clock-names = "bus", "mod";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/amd-ccp.txt b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
new file mode 100644
index 0000000000..d87579d63d
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/amd-ccp.txt
@@ -0,0 +1,17 @@
+* AMD Cryptographic Coprocessor driver (ccp)
+
+Required properties:
+- compatible: Should be "amd,ccp-seattle-v1a"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the CCP interrupt
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+	ccp@e0100000 {
+		compatible = "amd,ccp-seattle-v1a";
+		reg = <0 0xe0100000 0 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 3 4>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
new file mode 100644
index 0000000000..948e11ebe4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/amlogic,gxl-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GXL Cryptographic Offloader
+
+maintainers:
+  - Corentin Labbe <clabbe@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,gxl-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for flow 0
+      - description: Interrupt for flow 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: blkmv
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/gxbb-clkc.h>
+
+    crypto: crypto-engine@c883e000 {
+        compatible = "amlogic,gxl-crypto";
+        reg = <0xc883e000 0x36>;
+        interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clkc CLKID_BLKMV>;
+        clock-names = "blkmv";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml
new file mode 100644
index 0000000000..9c97874a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/arm,cryptocell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm TrustZone CryptoCell cryptographic engine
+
+maintainers:
+  - Gilad Ben-Yossef <gilad@benyossef.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,cryptocell-713-ree
+      - arm,cryptocell-703-ree
+      - arm,cryptocell-712-ree
+      - arm,cryptocell-710-ree
+      - arm,cryptocell-630p-ree
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    arm_cc712: crypto@80000000 {
+            compatible = "arm,cryptocell-712-ree";
+            reg = <0x80000000 0x10000>;
+            interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt
new file mode 100644
index 0000000000..d9cca4875b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt
@@ -0,0 +1,16 @@
+Axis crypto engine with PDMA interface.
+
+Required properties:
+- compatible : Should be one of the following strings:
+	"axis,artpec6-crypto" for the version in the Axis ARTPEC-6 SoC
+	"axis,artpec7-crypto" for the version in the Axis ARTPEC-7 SoC.
+- reg: Base address and size for the PDMA register area.
+- interrupts: Interrupt handle for the PDMA interrupt line.
+
+Example:
+
+crypto@f4264000 {
+	compatible = "axis,artpec6-crypto";
+	reg = <0xf4264000 0x1000>;
+	interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
new file mode 100644
index 0000000000..a772d232de
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED HACE hash and crypto Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |
+  The Hash and Crypto Engine (HACE) is designed to accelerate the throughput
+  of hash data digest, encryption, and decryption. Basically, HACE can be
+  divided into two independently engines - Hash Engine and Crypto Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-hace
+      - aspeed,ast2600-hace
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    hace: crypto@1e6d0000 {
+        compatible = "aspeed,ast2600-hace";
+        reg = <0x1e6d0000 0x200>;
+        interrupts = <4>;
+        clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+        resets = <&syscon ASPEED_RESET_HACE>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
new file mode 100644
index 0000000000..b18f178aac
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED ACRY ECDSA/RSA Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description:
+  The ACRY ECDSA/RSA engines is designed to accelerate the throughput
+  of ECDSA/RSA signature and verification. Basically, ACRY can be
+  divided into two independent engines - ECC Engine and RSA Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-acry
+
+  reg:
+    items:
+      - description: acry base address & size
+      - description: acry sram base address & size
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    acry: crypto@1e6fa000 {
+        compatible = "aspeed,ast2600-acry";
+        reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+        interrupts = <160>;
+        clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
new file mode 100644
index 0000000000..0b7383b310
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: aes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    aes: crypto@e1810000 {
+      compatible = "atmel,at91sam9g46-aes";
+      reg = <0xe1810000 0x100>;
+      interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+      clock-names = "aes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+             <&dma0 AT91_XDMAC_DT_PERID(2)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
new file mode 100644
index 0000000000..ee2ffb0343
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-sha
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sha_clk
+
+  dmas:
+    maxItems: 1
+    description: TX DMA Channel
+
+  dma-names:
+    const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    sha: crypto@e1814000 {
+      compatible = "atmel,at91sam9g46-sha";
+      reg = <0xe1814000 0x100>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+      clock-names = "sha_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
new file mode 100644
index 0000000000..3d6ed24b1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-tdes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tdes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    tdes: crypto@e2014000 {
+      compatible = "atmel,at91sam9g46-tdes";
+      reg = <0xe2014000 0x100>;
+      interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+      clock-names = "tdes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+             <&dma0 AT91_XDMAC_DT_PERID(53)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
new file mode 100644
index 0000000000..29b6007568
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt
@@ -0,0 +1,22 @@
+The Broadcom Secure Processing Unit (SPU) hardware supports symmetric
+cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware
+blocks.
+
+Required properties:
+- compatible: Should be one of the following:
+  brcm,spum-crypto - for devices with SPU-M hardware
+  brcm,spu2-crypto - for devices with SPU2 hardware
+  brcm,spu2-v2-crypto - for devices with enhanced SPU2 hardware features like SHA3
+  and Rabin Fingerprint support
+  brcm,spum-nsp-crypto - for the Northstar Plus variant of the SPU-M hardware
+
+- reg: Should contain SPU registers location and length.
+- mboxes: The mailbox channel to be used to communicate with the SPU.
+  Mailbox channels correspond to DMA rings on the device.
+
+Example:
+	crypto@612d0000 {
+		compatible = "brcm,spum-crypto";
+		reg = <0 0x612d0000 0 0x900>;
+		mboxes = <&pdc0 0>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml
new file mode 100644
index 0000000000..b633b8d0e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/cortina,sl3516-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SL3516 cryptographic offloader driver
+
+maintainers:
+  - Corentin Labbe <clabbe@baylibre.com>
+
+properties:
+  compatible:
+    enum:
+      - cortina,sl3516-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+
+    crypto@62000000 {
+        compatible = "cortina,sl3516-crypto";
+        reg = <0x62000000 0x10000>;
+        interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+        resets = <&syscon GEMINI_RESET_SECURITY>;
+        clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
new file mode 100644
index 0000000000..e879bc0be8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0-mon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Secure Non-Volatile Storage (SNVS)
+
+maintainers:
+  - '"Horia Geantă" <horia.geanta@nxp.com>'
+  - Pankaj Gupta <pankaj.gupta@nxp.com>
+  - Gaurav Jain <gaurav.jain@nxp.com>
+
+description:
+  Node defines address range and the associated interrupt for the SNVS function.
+  This function monitors security state information & reports security
+  violations. This also included rtc, system power off and ON/OFF key.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,sec-v4.0-mon
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,sec-v5.0-mon
+          - const: fsl,sec-v4.0-mon
+      - items:
+          - enum:
+              - fsl,sec-v5.3-mon
+              - fsl,sec-v5.4-mon
+          - const: fsl,sec-v5.0-mon
+          - const: fsl,sec-v4.0-mon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  snvs-rtc-lp:
+    type: object
+    additionalProperties: false
+    description:
+      Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+
+    properties:
+      compatible:
+        const: fsl,sec-v4.0-mon-rtc-lp
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: snvs-rtc
+
+      interrupts:
+        # VFxxx has only one. What is the 2nd one?
+        minItems: 1
+        maxItems: 2
+
+      regmap:
+        description: Parent node containing registers
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      offset:
+        description: LP register offset
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0x34
+
+    required:
+      - compatible
+      - interrupts
+      - regmap
+
+  snvs-powerkey:
+    type: object
+    additionalProperties: false
+    description:
+      The snvs-pwrkey is designed to enable POWER key function which controlled
+      by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+      system if pressed after system suspend.
+
+    properties:
+      compatible:
+        const: fsl,sec-v4.0-pwrkey
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: snvs-pwrkey
+
+      interrupts:
+        maxItems: 1
+
+      regmap:
+        description: Parent node containing registers
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      wakeup-source: true
+
+      linux,keycode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 116
+        deprecated: true
+
+      linux,keycodes:
+        maxItems: 1
+        default: 116
+
+    required:
+      - compatible
+      - interrupts
+      - regmap
+
+  snvs-lpgpr:
+    $ref: /schemas/nvmem/snvs-lpgpr.yaml#
+
+  snvs-poweroff:
+    description:
+      The SNVS could drive signal to PMIC to turn off system power by setting
+      SNVS_LP LPCR register.
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+
+    sec_mon: sec-mon@314000 {
+        compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+        reg = <0x314000 0x1000>;
+
+        snvs-rtc-lp {
+            compatible = "fsl,sec-v4.0-mon-rtc-lp";
+            regmap = <&sec_mon>;
+            offset = <0x34>;
+            clocks = <&clks IMX7D_SNVS_CLK>;
+            clock-names = "snvs-rtc";
+            interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        snvs-powerkey {
+            compatible = "fsl,sec-v4.0-pwrkey";
+            regmap = <&sec_mon>;
+            clocks = <&clks IMX7D_SNVS_CLK>;
+            clock-names = "snvs-pwrkey";
+            interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+            linux,keycode = <116>; /* KEY_POWER */
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
new file mode 100644
index 0000000000..0a9ed2848b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SEC 4
+
+maintainers:
+  - '"Horia Geantă" <horia.geanta@nxp.com>'
+  - Pankaj Gupta <pankaj.gupta@nxp.com>
+  - Gaurav Jain <gaurav.jain@nxp.com>
+
+description: |
+  NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+  Accelerator and Assurance Module (CAAM).
+
+  SEC 4 h/w can process requests from 2 types of sources.
+  1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+  2. Job Rings (HW interface between cores & SEC 4 registers).
+
+  High Speed Data Path Configuration:
+
+  HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+  such as the P4080.  The number of simultaneous dequeues the QI can make is
+  equal to the number of Descriptor Controller (DECO) engines in a particular
+  SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+  dequeue from 5 subportals simultaneously.
+
+  Job Ring Data Path Configuration:
+
+  Each JR is located on a separate 4k page, they may (or may not) be made visible
+  in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
+  up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,sec-v5.4
+          - const: fsl,sec-v5.0
+          - const: fsl,sec-v4.0
+      - items:
+          - enum:
+              - fsl,imx6ul-caam
+              - fsl,sec-v5.0
+          - const: fsl,sec-v4.0
+      - const: fsl,sec-v4.0
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [mem, aclk, ipg, emi_slow]
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  fsl,sec-era:
+    description: Defines the 'ERA' of the SEC device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  '^jr@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      Job Ring (JR) Node. Defines data processing interface to SEC 4 across the
+      peripheral bus for purposes of processing cryptographic descriptors. The
+      specified address range can be made visible to one (or more) cores. The
+      interrupt defined for this node is controlled within the address range of
+      this node.
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: fsl,sec-v5.4-job-ring
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - items:
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - const: fsl,sec-v4.0-job-ring
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      fsl,liodn:
+        description:
+          Specifies the LIODN to be used in conjunction with the ppid-to-liodn
+          table that specifies the PPID to LIODN mapping. Needed if the PAMU is
+          used.  Value is a 12 bit value where value is a LIODN ID for this JR.
+          This property is normally set by boot firmware.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 0xfff
+
+  '^rtic@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      Run Time Integrity Check (RTIC) Node. Defines a register space that
+      contains up to 5 sets of addresses and their lengths (sizes) that will be
+      checked at run time.  After an initial hash result is calculated, these
+      addresses are checked by HW to monitor any change.  If any memory is
+      modified, a Security Violation is triggered (see SNVS definition).
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: fsl,sec-v5.4-rtic
+              - const: fsl,sec-v5.0-rtic
+              - const: fsl,sec-v4.0-rtic
+          - const: fsl,sec-v4.0-rtic
+
+      reg:
+        maxItems: 1
+
+      ranges:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      '^rtic-[a-z]@[0-9a-f]+$':
+        type: object
+        additionalProperties: false
+        description:
+          Run Time Integrity Check (RTIC) Memory Node defines individual RTIC
+          memory regions that are used to perform run-time integrity check of
+          memory areas that should not modified. The node defines a register
+          that contains the memory address & length (combined) and a second
+          register that contains the hash result in big endian format.
+
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                  - const: fsl,sec-v5.4-rtic-memory
+                  - const: fsl,sec-v5.0-rtic-memory
+                  - const: fsl,sec-v4.0-rtic-memory
+              - const: fsl,sec-v4.0-rtic-memory
+
+          reg:
+            items:
+              - description: RTIC memory address
+              - description: RTIC hash result
+
+          fsl,liodn:
+            description:
+              Specifies the LIODN to be used in conjunction with the
+              ppid-to-liodn table that specifies the PPID to LIODN mapping.
+              Needed if the PAMU is used.  Value is a 12 bit value where value
+              is a LIODN ID for this JR. This property is normally set by boot
+              firmware.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 0xfff
+
+          fsl,rtic-region:
+            description:
+              Specifies the HW address (36 bit address) for this region
+              followed by the length of the HW partition to be checked;
+              the address is represented as a 64 bit quantity followed
+              by a 32 bit length.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@300000 {
+        compatible = "fsl,sec-v4.0";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x300000 0x10000>;
+        ranges = <0 0x300000 0x10000>;
+        interrupts = <92 2>;
+
+        jr@1000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x1000 0x1000>;
+            interrupts = <88 2>;
+        };
+
+        jr@2000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x2000 0x1000>;
+            interrupts = <89 2>;
+        };
+
+        jr@3000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x3000 0x1000>;
+            interrupts = <90 2>;
+        };
+
+        jr@4000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x4000 0x1000>;
+            interrupts = <91 2>;
+        };
+
+        rtic@6000 {
+            compatible = "fsl,sec-v4.0-rtic";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x6000 0x100>;
+            ranges = <0x0 0x6100 0xe00>;
+
+            rtic-a@0 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x00 0x20>, <0x100 0x80>;
+            };
+
+            rtic-b@20 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x20 0x20>, <0x200 0x80>;
+            };
+
+            rtic-c@40 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x40 0x20>, <0x300 0x80>;
+            };
+
+            rtic-d@60 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x60 0x20>, <0x500 0x80>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
new file mode 100644
index 0000000000..8dd36c2f76
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-dcp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-dcp
+          - fsl,imx28-dcp
+      - items:
+          - enum:
+              - fsl,imx6sl-dcp
+              - fsl,imx6ull-dcp
+          - const: fsl,imx28-dcp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
+      must be supplied, optionally Secure IRQ can be present, but is currently
+      not implemented and not used.
+    items:
+      - description: MXS DCP VMI interrupt
+      - description: MXS DCP DCP interrupt
+      - description: MXS DCP secure interrupt
+    minItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dcp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@80028000 {
+        compatible = "fsl,imx23-dcp";
+        reg = <0x80028000 0x2000>;
+        interrupts = <53>, <54>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
new file mode 100644
index 0000000000..d531f3af3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAHARA Cryptographic Accelerator included in some i.MX chips
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx27-sahara
+      - fsl,imx53-sahara
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@10025000 {
+        compatible = "fsl,imx27-sahara";
+        reg = < 0x10025000 0x800>;
+        interrupts = <75>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml
new file mode 100644
index 0000000000..563a31605d
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl-imx-scc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Security Controller (SCC)
+
+maintainers:
+  - Steffen Trumtrar <s.trumtrar@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx25-scc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SCC SCM interrupt
+      - description: SCC SMN interrupt
+
+  interrupt-names:
+    items:
+      - const: scm
+      - const: smn
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@53fac000 {
+        compatible = "fsl,imx25-scc";
+        reg = <0x53fac000 0x4000>;
+        clocks = <&clks 111>;
+        clock-names = "ipg";
+        interrupts = <49>, <50>;
+        interrupt-names = "scm", "smn";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
new file mode 100644
index 0000000000..125f155d00
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt
@@ -0,0 +1,65 @@
+Freescale SoC SEC Security Engines versions 1.x-2.x-3.x
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" (SEC2/3)
+                             e.g., "fsl,sec1.2", "fsl,sec1.0" (SEC1)
+    warning: SEC1 and SEC2 are mutually exclusive
+- reg : Offset and length of the register set for the device
+- interrupts : the SEC's interrupt number
+- fsl,num-channels : An integer representing the number of channels
+  available.
+- fsl,channel-fifo-len : An integer representing the number of
+  descriptor pointers each channel fetch fifo can hold.
+- fsl,exec-units-mask : The bitmask representing what execution units
+  (EUs) are available. It's a single 32-bit cell. EU information
+  should be encoded following the SEC's Descriptor Header Dword
+  EU_SEL0 field documentation, i.e. as follows:
+
+	bit 0  = reserved - should be 0
+	bit 1  = set if SEC has the ARC4 EU (AFEU)
+	bit 2  = set if SEC has the DES/3DES EU (DEU)
+	bit 3  = set if SEC has the message digest EU (MDEU/MDEU-A)
+	bit 4  = set if SEC has the random number generator EU (RNG)
+	bit 5  = set if SEC has the public key EU (PKEU)
+	bit 6  = set if SEC has the AES EU (AESU)
+	bit 7  = set if SEC has the Kasumi EU (KEU)
+	bit 8  = set if SEC has the CRC EU (CRCU)
+	bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B)
+
+remaining bits are reserved for future SEC EUs.
+
+- fsl,descriptor-types-mask : The bitmask representing what descriptors
+  are available. It's a single 32-bit cell. Descriptor type information
+  should be encoded following the SEC's Descriptor Header Dword DESC_TYPE
+  field documentation, i.e. as follows:
+
+	bit 0  = set if SEC supports the aesu_ctr_nonsnoop desc. type
+	bit 1  = set if SEC supports the ipsec_esp descriptor type
+	bit 2  = set if SEC supports the common_nonsnoop desc. type
+	bit 3  = set if SEC supports the 802.11i AES ccmp desc. type
+	bit 4  = set if SEC supports the hmac_snoop_no_afeu desc. type
+	bit 5  = set if SEC supports the srtp descriptor type
+	bit 6  = set if SEC supports the non_hmac_snoop_no_afeu desc.type
+	bit 7  = set if SEC supports the pkeu_assemble descriptor type
+	bit 8  = set if SEC supports the aesu_key_expand_output desc.type
+	bit 9  = set if SEC supports the pkeu_ptmul descriptor type
+	bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
+	bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+
+  ..and so on and so forth.
+
+Example:
+
+	/* MPC8548E */
+	crypto@30000 {
+		compatible = "fsl,sec2.1", "fsl,sec2.0";
+		reg = <0x30000 0x10000>;
+		interrupts = <29 2>;
+		interrupt-parent = <&mpic>;
+		fsl,num-channels = <4>;
+		fsl,channel-fifo-len = <24>;
+		fsl,exec-units-mask = <0xfe>;
+		fsl,descriptor-types-mask = <0x12b0ebf>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
new file mode 100644
index 0000000000..73b0eb950b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -0,0 +1,157 @@
+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embedded with SEC 6.
+SEC 6 device tree binding include:
+   -SEC 6 Node
+   -Job Ring Node
+   -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+    Node defines the base address of the SEC 6 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 6 block.
+    For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0".
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC 6 configuration registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 6.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
+
+EXAMPLE
+	crypto@a0000 {
+		compatible = "fsl,sec-v6.0";
+		fsl,sec-era = <6>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 6
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0-job-ring".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+           the parent physical address and the length the JR registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <49 2 0 0>;
+	};
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself.  A chip using the SEC
+should include the dtsi inside each SEC node.  Example:
+
+In qoriq-sec6.0.dtsi:
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
+
+In the C293 device tree, we add the include of public property:
+
+	crypto@a0000 {
+		/include/ "qoriq-sec6.0.dtsi"
+	}
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <49 2 0 0>;
+		};
+
+		jr@2000 {
+			interrupts = <50 2 0 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
new file mode 100644
index 0000000000..d28fd1af01
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt
@@ -0,0 +1,67 @@
+* Hisilicon hip07 Security Accelerator (SEC)
+
+Required properties:
+- compatible: Must contain one of
+  - "hisilicon,hip06-sec"
+  - "hisilicon,hip07-sec"
+- reg: Memory addresses and lengths of the memory regions through which
+  this device is controlled.
+  Region 0 has registers to control the backend processing engines.
+  Region 1 has registers for functionality common to all queues.
+  Regions 2-18 have registers for the 16 individual queues which are isolated
+  both in hardware and within the driver.
+- interrupts: Interrupt specifiers.
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client node
+  bindings.
+  Interrupt 0 is for the SEC unit error queue.
+  Interrupt 2N + 1 is the completion interrupt for queue N.
+  Interrupt 2N + 2 is the error interrupt for queue N.
+- dma-coherent:  The driver assumes coherent dma is possible.
+
+Optional properties:
+- iommus: The SEC units are behind smmu-v3 iommus.
+  Refer to iommu/arm,smmu-v3.txt for more information.
+
+Example:
+
+p1_sec_a: crypto@400d2000000 {
+	compatible = "hisilicon,hip07-sec";
+	reg = <0x400 0xd0000000 0x0 0x10000
+	       0x400 0xd2000000 0x0 0x10000
+	       0x400 0xd2010000 0x0 0x10000
+	       0x400 0xd2020000 0x0 0x10000
+	       0x400 0xd2030000 0x0 0x10000
+	       0x400 0xd2040000 0x0 0x10000
+	       0x400 0xd2050000 0x0 0x10000
+	       0x400 0xd2060000 0x0 0x10000
+	       0x400 0xd2070000 0x0 0x10000
+	       0x400 0xd2080000 0x0 0x10000
+	       0x400 0xd2090000 0x0 0x10000
+	       0x400 0xd20a0000 0x0 0x10000
+	       0x400 0xd20b0000 0x0 0x10000
+	       0x400 0xd20c0000 0x0 0x10000
+	       0x400 0xd20d0000 0x0 0x10000
+	       0x400 0xd20e0000 0x0 0x10000
+	       0x400 0xd20f0000 0x0 0x10000
+	       0x400 0xd2100000 0x0 0x10000>;
+	interrupt-parent = <&p1_mbigen_sec_a>;
+	iommus = <&p1_smmu_alg_a 0x600>;
+	dma-coherent;
+	interrupts = <576 4>,
+		     <577 1>, <578 4>,
+		     <579 1>, <580 4>,
+		     <581 1>, <582 4>,
+		     <583 1>, <584 4>,
+		     <585 1>, <586 4>,
+		     <587 1>, <588 4>,
+		     <589 1>, <590 4>,
+		     <591 1>, <592 4>,
+		     <593 1>, <594 4>,
+		     <595 1>, <596 4>,
+		     <597 1>, <598 4>,
+		     <599 1>, <600 4>,
+		     <601 1>, <602 4>,
+		     <603 1>, <604 4>,
+		     <605 1>, <606 4>,
+		     <607 1>, <608 4>;
+};
diff --git a/Documentation/devicetree/bindings/crypto/img-hash.txt b/Documentation/devicetree/bindings/crypto/img-hash.txt
new file mode 100644
index 0000000000..91a3d757d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/img-hash.txt
@@ -0,0 +1,27 @@
+Imagination Technologies hardware hash accelerator
+
+The hash accelerator provides hardware hashing acceleration for
+SHA1, SHA224, SHA256 and MD5 hashes
+
+Required properties:
+
+- compatible : "img,hash-accelerator"
+- reg : Offset and length of the register set for the module, and the DMA port
+- interrupts : The designated IRQ line for the hashing module.
+- dmas : DMA specifier as per Documentation/devicetree/bindings/dma/dma.txt
+- dma-names : Should be "tx"
+- clocks : Clock specifiers
+- clock-names : "sys" Used to clock the hash block registers
+		"hash" Used to clock data through the accelerator
+
+Example:
+
+	hash: hash@18149600 {
+	compatible = "img,hash-accelerator";
+		reg = <0x18149600 0x100>, <0x18101100 0x4>;
+		interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&dma 8 0xffffffff 0>;
+		dma-names = "tx";
+		clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>;
+		clock-names = "sys", "hash";
+	};
diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
new file mode 100644
index 0000000000..3bbf144c99
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
@@ -0,0 +1,40 @@
+Inside Secure SafeXcel cryptographic engine
+
+Required properties:
+- compatible: Should be "inside-secure,safexcel-eip197b",
+	      "inside-secure,safexcel-eip197d" or
+              "inside-secure,safexcel-eip97ies".
+- reg: Base physical address of the engine and length of memory mapped region.
+- interrupts: Interrupt numbers for the rings and engine.
+- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem".
+
+Optional properties:
+- clocks: Reference to the crypto engine clocks, the second clock is
+          needed for the Armada 7K/8K SoCs.
+- clock-names: mandatory if there is a second clock, in this case the
+               name must be "core" for the first clock and "reg" for
+               the second one.
+
+Backward compatibility:
+Two compatibles are kept for backward compatibility, but shouldn't be used for
+new submissions:
+- "inside-secure,safexcel-eip197" is equivalent to
+  "inside-secure,safexcel-eip197b".
+- "inside-secure,safexcel-eip97" is equivalent to
+  "inside-secure,safexcel-eip97ies".
+
+Example:
+
+	crypto: crypto@800000 {
+		compatible = "inside-secure,safexcel-eip197b";
+		reg = <0x800000 0x200000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
+				  "eip";
+		clocks = <&cpm_syscon0 1 26>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
new file mode 100644
index 0000000000..a4006237aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx cryptographic engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE
+  (Network Processing Engine). Since it is not a device on its own
+  it is defined as a subnode of the NPE, if crypto support is
+  available on the platform.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-crypto
+
+  intel,npe-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the NPE this crypto engine
+          - description: the NPE instance number
+    description: phandle to the NPE this crypto engine is using, the cell
+      describing the NPE instance to be used.
+
+  queue-rx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
+    description: phandle to the RX queue on the NPE, the cell describing
+      the queue instance to be used.
+
+  queue-txready:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TX READY queue on the NPE
+          - description: the queue instance number
+    description: phandle to the TX READY queue on the NPE, the cell describing
+      the queue instance to be used.
+
+required:
+  - compatible
+  - intel,npe-handle
+  - queue-rx
+  - queue-txready
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
new file mode 100644
index 0000000000..fedd8be56a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS AES
+
+maintainers:
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) AES engine provides
+  hardware-accelerated AES/SM4 encryption/decryption.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@30008000 {
+      compatible = "intel,keembay-ocs-aes";
+      reg = <0x30008000 0x1000>;
+      interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 95>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
new file mode 100644
index 0000000000..2bb95247b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS ECC
+
+maintainers:
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+  - Prabhjot Khurana <prabhjot.khurana@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) Elliptic Curve
+  Cryptography (ECC) device provides hardware acceleration for elliptic curve
+  cryptography using the NIST P-256 and NIST P-384 elliptic curves.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-ecc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@30001000 {
+      compatible = "intel,keembay-ocs-ecc";
+      reg = <0x30001000 0x1000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 95>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
new file mode 100644
index 0000000000..46e2853ab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS HCU
+
+maintainers:
+  - Declan Murphy <declan.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) Hash Control Unit (HCU)
+  provides hardware-accelerated hashing and HMAC.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-hcu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@3000b000 {
+      compatible = "intel,keembay-ocs-hcu";
+      reg = <0x3000b000 0x1000>;
+      interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 94>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
new file mode 100644
index 0000000000..28d3f2496b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt
@@ -0,0 +1,44 @@
+Marvell Cryptographic Engines And Security Accelerator
+
+Required properties:
+- compatible: should be one of the following string
+	      "marvell,orion-crypto"
+	      "marvell,kirkwood-crypto"
+	      "marvell,dove-crypto"
+	      "marvell,armada-370-crypto"
+	      "marvell,armada-xp-crypto"
+	      "marvell,armada-375-crypto"
+	      "marvell,armada-38x-crypto"
+- reg: base physical address of the engine and length of memory mapped
+       region. Can also contain an entry for the SRAM attached to the CESA,
+       but this representation is deprecated and marvell,crypto-srams should
+       be used instead
+- reg-names: "regs". Can contain an "sram" entry, but this representation
+	     is deprecated and marvell,crypto-srams should be used instead
+- interrupts: interrupt number
+- clocks: reference to the crypto engines clocks. This property is not
+	  required for orion and kirkwood platforms
+- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine
+	       id.
+	       This property is not required for the orion and kirkwoord
+	       platforms.
+	       "cesazX" clocks are not required on armada-370 platforms
+- marvell,crypto-srams: phandle to crypto SRAM definitions
+
+Optional properties:
+- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
+			    specified the whole SRAM is used (2KB)
+
+
+Examples:
+
+	crypto@90000 {
+		compatible = "marvell,armada-xp-crypto";
+		reg = <0x90000 0x10000>;
+		reg-names = "regs";
+		interrupts = <48>, <49>;
+		clocks = <&gateclk 23>, <&gateclk 23>;
+		clock-names = "cesa0", "cesa1";
+		marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>;
+		marvell,crypto-sram-size = <0x600>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
new file mode 100644
index 0000000000..450da3661c
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
@@ -0,0 +1,25 @@
+MediaTek cryptographic accelerators
+
+Required properties:
+- compatible: Should be "mediatek,eip97-crypto"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the five crypto engines interrupts in numeric
+	order. These are global system and four descriptor rings.
+- clocks: the clock used by the core
+- clock-names: Must contain "cryp".
+- power-domains: Must contain a reference to the PM domain.
+
+
+Example:
+	crypto: crypto@1b240000 {
+		compatible = "mediatek,eip97-crypto";
+		reg = <0 0x1b240000 0 0x20000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
+		clock-names = "cryp";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
new file mode 100644
index 0000000000..d9b92e2f31
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt
@@ -0,0 +1,32 @@
+Marvell Cryptographic Engines And Security Accelerator
+
+Required properties:
+- compatible: should be one of the following string
+	      "marvell,orion-crypto"
+	      "marvell,kirkwood-crypto"
+	      "marvell,dove-crypto"
+- reg: base physical address of the engine and length of memory mapped
+       region. Can also contain an entry for the SRAM attached to the CESA,
+       but this representation is deprecated and marvell,crypto-srams should
+       be used instead
+- reg-names: "regs". Can contain an "sram" entry, but this representation
+	     is deprecated and marvell,crypto-srams should be used instead
+- interrupts: interrupt number
+- clocks: reference to the crypto engines clocks. This property is only
+	  required for Dove platforms
+- marvell,crypto-srams: phandle to crypto SRAM definitions
+
+Optional properties:
+- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not
+			    specified the whole SRAM is used (2KB)
+
+Examples:
+
+	crypto@30000 {
+		compatible = "marvell,orion-crypto";
+		reg = <0x30000 0x10000>;
+		reg-names = "regs";
+		interrupts = <22>;
+		marvell,crypto-srams = <&crypto_sram>;
+		marvell,crypto-sram-size = <0x600>;
+	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt
new file mode 100644
index 0000000000..fd9717653c
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt
@@ -0,0 +1,31 @@
+OMAP SoC AES crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  AES versions:
+  - "ti,omap2-aes" for OMAP2.
+  - "ti,omap3-aes" for OMAP3.
+  - "ti,omap4-aes" for OMAP4 and AM33XX.
+  Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
+  more algorithms) but they are incompatible with OMAP4.
+- ti,hwmods: Name of the hwmod associated with the AES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the AES module.
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+
+Example:
+	/* AM335x */
+	aes: aes@53500000 {
+		compatible = "ti,omap4-aes";
+		ti,hwmods = "aes";
+		reg = <0x53500000 0xa0>;
+		interrupts = <102>;
+		dmas = <&edma 6>,
+		       <&edma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-des.txt b/Documentation/devicetree/bindings/crypto/omap-des.txt
new file mode 100644
index 0000000000..e8c63bf2e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-des.txt
@@ -0,0 +1,30 @@
+OMAP SoC DES crypto Module
+
+Required properties:
+
+- compatible : Should contain "ti,omap4-des"
+- ti,hwmods: Name of the hwmod associated with the DES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the DES module
+- clocks : A phandle to the functional clock node of the DES module
+           corresponding to each entry in clock-names
+- clock-names : Name of the functional clock, should be "fck"
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+	Each entry corresponds to an entry in dma-names
+- dma-names: DMA request names should include "tx" and "rx" if present
+
+Example:
+	/* DRA7xx SoC */
+	des: des@480a5000 {
+		compatible = "ti,omap4-des";
+		ti,hwmods = "des";
+		reg = <0x480a5000 0xa0>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&sdma 117>, <&sdma 116>;
+		dma-names = "tx", "rx";
+		clocks = <&l3_iclk_div>;
+		clock-names = "fck";
+	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
new file mode 100644
index 0000000000..ad91155696
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,28 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SHAM versions:
+  - "ti,omap2-sham" for OMAP2 & OMAP3.
+  - "ti,omap4-sham" for OMAP4 and AM33XX.
+  - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifiers for the rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+	/* AM335x */
+	sham: sham@53100000 {
+		compatible = "ti,omap4-sham";
+		ti,hwmods = "sham";
+		reg = <0x53100000 0x200>;
+		interrupts = <109>;
+		dmas = <&edma 36>;
+		dma-names = "rx";
+	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
new file mode 100644
index 0000000000..7da9aa82d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm8450-inline-crypto-engine
+          - qcom,sm8550-inline-crypto-engine
+      - const: qcom,inline-crypto-engine
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    crypto@1d88000 {
+      compatible = "qcom,sm8550-inline-crypto-engine",
+                   "qcom,inline-crypto-engine";
+      reg = <0x01d88000 0x8000>;
+      clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
new file mode 100644
index 0000000000..bb42f4588b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Pseudo Random Number Generator
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,prng  # 8916 etc.
+      - qcom,prng-ee  # 8996 and later using EE
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f9bff000 {
+        compatible = "qcom,prng";
+        reg = <0xf9bff000 0x200>;
+        clocks = <&clk 125>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
new file mode 100644
index 0000000000..8e665d910e
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm crypto engine driver
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  This document defines the binding for the QCE crypto
+  controller found on Qualcomm parts.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,crypto-v5.1
+        deprecated: true
+        description: Kept only for ABI backward compatibility
+
+      - const: qcom,crypto-v5.4
+        deprecated: true
+        description: Kept only for ABI backward compatibility
+
+      - items:
+          - enum:
+              - qcom,ipq4019-qce
+              - qcom,sm8150-qce
+          - const: qcom,qce
+
+      - items:
+          - enum:
+              - qcom,ipq6018-qce
+              - qcom,ipq8074-qce
+              - qcom,ipq9574-qce
+              - qcom,msm8996-qce
+              - qcom,qcm2290-qce
+              - qcom,sdm845-qce
+              - qcom,sm6115-qce
+          - const: qcom,ipq4019-qce
+          - const: qcom,qce
+
+      - items:
+          - enum:
+              - qcom,sm8250-qce
+              - qcom,sm8350-qce
+              - qcom,sm8450-qce
+              - qcom,sm8550-qce
+          - const: qcom,sm8150-qce
+          - const: qcom,qce
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description:
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    maxItems: 1
+    description:
+      Interconnect path between qce crypto and main memory.
+
+  interconnect-names:
+    const: memory
+
+  dmas:
+    items:
+      - description: DMA specifiers for rx dma channel.
+      - description: DMA specifiers for tx dma channel.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,crypto-v5.1
+              - qcom,crypto-v5.4
+              - qcom,ipq6018-qce
+              - qcom,ipq8074-qce
+              - qcom,msm8996-qce
+              - qcom,sdm845-qce
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qce
+              - qcom,sm6115-qce
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: core
+      required:
+        - clocks
+        - clock-names
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
+    crypto-engine@fd45a000 {
+        compatible = "qcom,ipq6018-qce", "qcom,ipq4019-qce", "qcom,qce";
+        reg = <0xfd45a000 0x6000>;
+        clocks = <&gcc GCC_CE2_AHB_CLK>,
+                 <&gcc GCC_CE2_AXI_CLK>,
+                 <&gcc GCC_CE2_CLK>;
+        clock-names = "iface", "bus", "core";
+        dmas = <&cryptobam 2>, <&cryptobam 3>;
+        dma-names = "rx", "tx";
+        iommus = <&apps_smmu 0x584 0x0011>,
+                 <&apps_smmu 0x586 0x0011>,
+                 <&apps_smmu 0x594 0x0011>,
+                 <&apps_smmu 0x596 0x0011>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml
new file mode 100644
index 0000000000..f1a9da8bff
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/rockchip,rk3288-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Electronics Security Accelerator
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-crypto
+      - rockchip,rk3328-crypto
+      - rockchip,rk3399-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-crypto
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: hclk
+            - const: sclk
+            - const: apb_pclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: master
+            - const: slave
+            - const: crypto-rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+    crypto@ff8a0000 {
+      compatible = "rockchip,rk3288-crypto";
+      reg = <0xff8a0000 0x4000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+      resets = <&cru SRST_CRYPTO>;
+      reset-names = "crypto-rst";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
new file mode 100644
index 0000000000..5b31891c97
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/samsung-slimsss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC SlimSSS (Slim Security SubSystem) module
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The SlimSSS module in Exynos5433 SoC supports the following:
+  -- Feeder (FeedCtrl)
+  -- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS
+  -- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos5433-slim-sss
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+
+  interrupts:
+    description: One feed control interrupt.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - interrupts
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.yaml b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml
new file mode 100644
index 0000000000..6d62b0e42f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/samsung-sss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC SSS (Security SubSystem) module
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The SSS module in S5PV210 SoC supports the following:
+  -- Feeder (FeedCtrl)
+  -- Advanced Encryption Standard (AES)
+  -- Data Encryption Standard (DES)/3DES
+  -- Public Key Accelerator (PKA)
+  -- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG
+  -- PRNG: Pseudo Random Number Generator
+
+  The SSS module in Exynos4 (Exynos4210) and Exynos5 (Exynos5420 and Exynos5250)
+  SoCs supports the following also:
+  -- ARCFOUR (ARC4)
+  -- True Random Number Generator (TRNG)
+  -- Secure Key Manager
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,s5pv210-secss           # for S5PV210
+          - samsung,exynos4210-secss        # for Exynos4210, Exynos4212,
+                                            # Exynos4412, Exynos5250,
+                                            # Exynos5260 and Exynos5420
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: secss
+
+  interrupts:
+    description: One feed control interrupt.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - interrupts
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
new file mode 100644
index 0000000000..50b2c2e0c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CRC
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32f7-crc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    crc@40023000 {
+      compatible = "st,stm32f7-crc";
+      reg = <0x40023000 0x400>;
+      clocks = <&rcc 0 12>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
new file mode 100644
index 0000000000..0ddeb8a9a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CRYP
+
+description: The STM32 CRYP block is built on the CRYP block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stn8820-cryp
+      - stericsson,ux500-cryp
+      - st,stm32f756-cryp
+      - st,stm32mp1-cryp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: mem2cryp DMA channel
+      - description: cryp2mem DMA channel
+
+  dma-names:
+    items:
+      - const: mem2cryp
+      - const: cryp2mem
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    cryp@54001000 {
+      compatible = "st,stm32mp1-cryp";
+      reg = <0x54001000 0x400>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc CRYP1>;
+      resets = <&rcc CRYP1_R>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
new file mode 100644
index 0000000000..ac480765cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 HASH
+
+description: The STM32 HASH block is built on the HASH block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stn8820-hash
+      - stericsson,ux500-hash
+      - st,stm32f456-hash
+      - st,stm32f756-hash
+      - st,stm32mp13-hash
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: in
+
+  dma-maxburst:
+    description: Set number of maximum dma burst supported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          items:
+            const: stericsson,ux500-hash
+    then:
+      properties:
+        interrupts: false
+    else:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    hash@54002000 {
+      compatible = "st,stm32f756-hash";
+      reg = <0x54002000 0x400>;
+      interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc HASH1>;
+      resets = <&rcc HASH1_R>;
+      dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+      dma-names = "in";
+      dma-maxburst = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
new file mode 100644
index 0000000000..71a2876bd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Cryptographic Module
+
+maintainers:
+  - Jia Jie Ho <jiajie.ho@starfivetech.com>
+  - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-crypto
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Hardware reference clock
+      - description: AHB reference clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: ahb
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA channel
+      - description: RX DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto: crypto@16000000 {
+        compatible = "starfive,jh7110-crypto";
+        reg = <0x16000000 0x4000>;
+        clocks = <&clk 15>, <&clk 16>;
+        clock-names = "hclk", "ahb";
+        interrupts = <28>;
+        resets = <&reset 3>;
+        dmas = <&dma 1 2>,
+               <&dma 0 2>;
+        dma-names = "tx", "rx";
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
new file mode 100644
index 0000000000..ff10a0838a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: K3 SoC SA2UL crypto module
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-sa2ul
+      - ti,am654-sa2ul
+      - ti,am64-sa2ul
+      - ti,am62-sa3ul
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: 'RX DMA Channel #1'
+      - description: 'RX DMA Channel #2'
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx1
+      - const: rx2
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges:
+    description:
+      Address translation for the possible RNG child node for SA2UL
+
+  clocks:
+    items:
+      - description: Clock used by PKA
+      - description: Main Input Clock
+      - description: Clock used by rng
+
+  clock-names:
+    items:
+      - const: pka_in_clk
+      - const: x1_clk
+      - const: x2_clk
+
+patternProperties:
+  "^rng@[a-f0-9]+$":
+    type: object
+    description:
+      Child RNG node for SA2UL
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62-sa3ul
+    then:
+      properties:
+        power-domains: false
+    else:
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    main_crypto: crypto@4e00000 {
+        compatible = "ti,j721e-sa2ul";
+        reg = <0x4e00000 0x1200>;
+        power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+        dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+               <&main_udmap 0x4001>;
+        dma-names = "tx", "rx1", "rx2";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
new file mode 100644
index 0000000000..8aead97a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP AES-GCM Hardware Accelerator
+
+maintainers:
+  - Kalyani Akula <kalyani.akula@amd.com>
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  The ZynqMP AES-GCM hardened cryptographic accelerator is used to
+  encrypt or decrypt the data with provided key and initialization vector.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-aes
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        compatible = "xlnx,zynqmp-firmware";
+        method = "smc";
+        xlnx_aes: zynqmp-aes {
+          compatible = "xlnx,zynqmp-aes";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/csky/cpus.txt b/Documentation/devicetree/bindings/csky/cpus.txt
new file mode 100644
index 0000000000..ae79412f26
--- /dev/null
+++ b/Documentation/devicetree/bindings/csky/cpus.txt
@@ -0,0 +1,73 @@
+==================
+C-SKY CPU Bindings
+==================
+
+The device tree allows to describe the layout of CPUs in a system through
+the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+defining properties for every cpu.
+
+Only SMP system need to care about the cpus node and single processor
+needn't define cpus node at all.
+
+=====================================
+cpus and cpu node bindings definition
+=====================================
+
+- cpus node
+
+	Description: Container of cpu nodes
+
+	The node name must be "cpus".
+
+	A cpus node must define the following properties:
+
+	- #address-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be set to 1
+	- #size-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be set to 0
+
+- cpu node
+
+	Description: Describes one of SMP cores
+
+	PROPERTIES
+
+	- device_type
+		Usage: required
+		Value type: <string>
+		Definition: must be "cpu"
+	- reg
+		Usage: required
+		Value type: <u32>
+		Definition: CPU index
+	- compatible:
+		Usage: required
+		Value type: <string>
+		Definition: must contain "csky", eg:
+			"csky,610"
+			"csky,807"
+			"csky,810"
+			"csky,860"
+
+Example:
+--------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			status = "ok";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			status = "ok";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/csky/pmu.txt b/Documentation/devicetree/bindings/csky/pmu.txt
new file mode 100644
index 0000000000..728d05ca6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/csky/pmu.txt
@@ -0,0 +1,38 @@
+===============================
+C-SKY Performance Monitor Units
+===============================
+
+C-SKY Performance Monitor is designed for ck807/ck810/ck860 SMP soc and
+it could count cpu's events for helping analysis performance issues.
+
+============================
+PMU node bindings definition
+============================
+
+	Description: Describes PMU
+
+	PROPERTIES
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be "csky,csky-pmu"
+	- interrupts
+		Usage: required
+		Value type: <u32 IRQ_TYPE_XXX>
+		Definition: must be pmu irq num defined by soc
+	- count-width
+		Usage: optional
+		Value type: <u32>
+		Definition: the width of pmu counter
+
+Examples:
+---------
+#include <dt-bindings/interrupt-controller/irq.h>
+
+	pmu: performace-monitor {
+		compatible = "csky,csky-pmu";
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&intc>;
+		count-width = <48>;
+        };
diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
new file mode 100644
index 0000000000..148191b0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
@@ -0,0 +1,18 @@
+
+* Rockchip rk3399 DFI device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dfi".
+- reg: physical base address of each DFI and length of memory mapped region
+- rockchip,pmu: phandle to the syscon managing the "pmu general register files"
+- clocks: phandles for clock specified in "clock-names" property
+- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
+
+Example:
+	dfi: dfi@ff630000 {
+		compatible = "rockchip,rk3399-dfi";
+		reg = <0x00 0xff630000 0x00 0x4000>;
+		rockchip,pmu = <&pmugrf>;
+		clocks = <&cru PCLK_DDR_MON>;
+		clock-names = "pclk_ddr_mon";
+	};
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
new file mode 100644
index 0000000000..2bdd05af60
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-nocp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos NoC (Network on Chip) Probe
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
+  NoC provides the primitive values to get the performance data. The packets
+  that the Network on Chip (NoC) probes detects are transported over the
+  network infrastructure to observer units. You can configure probes to capture
+  packets with header or data on the data request response network, or as
+  traffic debug or statistic collectors. Exynos542x bus has multiple NoC probes
+  to provide bandwidth information about behavior of the SoC that you can use
+  while analyzing system performance.
+
+properties:
+  compatible:
+    const: samsung,exynos5420-nocp
+
+  clock-names:
+    items:
+      - const: nocp
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nocp_mem0_0: nocp@10ca1000 {
+        compatible = "samsung,exynos5420-nocp";
+        reg = <0x10ca1000 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
new file mode 100644
index 0000000000..d27dcb2fef
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-ppmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+  each IP. PPMU provides the primitive values to get performance data. These
+  PPMU events provide information of the SoC's behaviors so that you may use to
+  analyze system performance, to make behaviors visible and to count usages of
+  each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).  The
+  Exynos PPMU driver uses the devfreq-event class to provide event data to
+  various devfreq devices. The devfreq devices would use the event data when
+  determining the current state of each IP.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-ppmu
+      - samsung,exynos-ppmu-v2
+
+  clock-names:
+    items:
+      - const: ppmu
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  events:
+    type: object
+
+    patternProperties:
+      '^ppmu-event[0-9]+(-[a-z0-9]+){,2}$':
+        type: object
+        properties:
+          event-name:
+            description: |
+              The unique event name among PPMU device
+            $ref: /schemas/types.yaml#/definitions/string
+
+          event-data-type:
+            description: |
+              Define the type of data which shell be counted by the counter.
+              You can check include/dt-bindings/pmu/exynos_ppmu.h for all
+              possible type, i.e. count read requests, count write data in
+              bytes, etc.  This field is optional and when it is missing, the
+              driver code will use default data type.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - event-name
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    // PPMUv1 nodes for Exynos3250 (although the board DTS defines events)
+    #include <dt-bindings/clock/exynos3250.h>
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+
+            ppmu_dmc0_2: ppmu-event2-dmc0 {
+                event-name = "ppmu-event2-dmc0";
+            };
+
+            ppmu_dmc0_1: ppmu-event1-dmc0 {
+                event-name = "ppmu-event1-dmc0";
+            };
+
+            ppmu_dmc0_0: ppmu-event0-dmc0 {
+                event-name = "ppmu-event0-dmc0";
+            };
+        };
+    };
+
+    ppmu_rightbus: ppmu@112a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x112a0000 0x2000>;
+        clocks = <&cmu CLK_PPMURIGHT>;
+        clock-names = "ppmu";
+
+        events {
+            ppmu_rightbus_3: ppmu-event3-rightbus {
+                event-name = "ppmu-event3-rightbus";
+            };
+        };
+    };
+
+  - |
+    // PPMUv2 nodes in Exynos5433
+    ppmu_d0_cpu: ppmu@10480000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x10480000 0x2000>;
+    };
+
+    ppmu_d0_general: ppmu@10490000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x10490000 0x2000>;
+
+        events {
+            ppmu_event0_d0_general: ppmu-event0-d0-general {
+                event-name = "ppmu-event0-d0-general";
+            };
+        };
+    };
+
+    ppmu_d0_rt: ppmu@104a0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104a0000 0x2000>;
+    };
+
+    ppmu_d1_cpu: ppmu@104b0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104b0000 0x2000>;
+    };
+
+    ppmu_d1_general: ppmu@104c0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104c0000 0x2000>;
+    };
+
+    ppmu_d1_rt: ppmu@104d0000 {
+        compatible = "samsung,exynos-ppmu-v2";
+        reg = <0x104d0000 0x2000>;
+    };
+
+  - |
+    // PPMUv1 nodes with event-data-type for Exynos4412
+    #include <dt-bindings/pmu/exynos_ppmu.h>
+
+    ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        clocks = <&clock 400>;
+        clock-names = "ppmu";
+
+        events {
+            ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+                event-data-type = <(PPMU_RO_DATA_CNT |
+                                    PPMU_WO_DATA_CNT)>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
new file mode 100644
index 0000000000..e3379d1067
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Activity Monitor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The activity monitor block collects statistics about the behaviour of other
+  components in the system. This information can be used to derive the rate at
+  which the external memory needs to be clocked in order to serve all requests
+  from the monitored clients.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra30-actmon
+      - nvidia,tegra114-actmon
+      - nvidia,tegra124-actmon
+      - nvidia,tegra210-actmon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: actmon
+      - const: emc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: actmon
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 12
+
+  interconnect-names:
+    minItems: 1
+    maxItems: 12
+    description:
+      Should include name of the interconnect path for each interconnect
+      entry. Consult TRM documentation for information about available
+      memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - interrupts
+  - interconnects
+  - interconnect-names
+  - operating-points-v2
+  - "#cooling-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/memory/tegra30-mc.h>
+
+    mc: memory-controller@7000f000 {
+        compatible = "nvidia,tegra30-mc";
+        reg = <0x7000f000 0x400>;
+        clocks = <&clk 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
+
+    emc: external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra30-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+    };
+
+    actmon@6000c800 {
+        compatible = "nvidia,tegra30-actmon";
+        reg = <0x6000c800 0x400>;
+        interrupts = <0 45 4>;
+        clocks = <&clk 119>, <&clk 57>;
+        clock-names = "actmon", "emc";
+        resets = <&rst 119>;
+        reset-names = "actmon";
+        operating-points-v2 = <&dvfs_opp_table>;
+        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
+        interconnect-names = "cpu-read";
+        #cooling-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
new file mode 100644
index 0000000000..ba06d1857b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Backend
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine backend exposes layers and sprites to the system.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-backend
+      - allwinner,sun5i-a13-display-backend
+      - allwinner,sun6i-a31-display-backend
+      - allwinner,sun7i-a20-display-backend
+      - allwinner,sun8i-a23-display-backend
+      - allwinner,sun8i-a33-display-backend
+      - allwinner,sun9i-a80-display-backend
+
+  reg:
+    minItems: 1
+    items:
+      - description: Display Backend registers
+      - description: SAT registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: be
+      - const: sat
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: The backend interface clock
+      - description: The backend module clock
+      - description: The backend DRAM clock
+      - description: The SAT clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+      - const: sat
+
+  resets:
+    minItems: 1
+    items:
+      - description: The Backend reset line
+      - description: The SAT reset line
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: be
+      - const: sat
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-a33-display-backend
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+  required:
+    - reg-names
+    - reset-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 1
+
+    reset-names:
+      maxItems: 1
+
+examples:
+  - |
+    /*
+     * This comes from the clock/sun4i-a10-ccu.h and
+     * reset/sun4i-a10-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_AHB_DE_BE0	42
+    #define CLK_DRAM_DE_BE0	140
+    #define CLK_DE_BE0		144
+    #define RST_DE_BE0		5
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun4i-a10-display-backend";
+        reg = <0x01e60000 0x10000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+                 <&ccu CLK_DRAM_DE_BE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_BE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&fe1_out_be0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_be0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a23-a33-ccu.h and
+     * reset/sun8i-a23-a33-ccu.h headers, but we can't include them
+     * since it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_DE_BE	40
+    #define CLK_BUS_SAT		46
+    #define CLK_DRAM_DE_BE	84
+    #define CLK_DE_BE		85
+    #define RST_BUS_DE_BE	21
+    #define RST_BUS_SAT		27
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun8i-a33-display-backend";
+        reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+        reg-names = "be", "sat";
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+                 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+        clock-names = "ahb", "mod",
+                      "ram", "sat";
+        resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+        reset-names = "be", "sat";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&drc0_in_be0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
new file mode 100644
index 0000000000..e6088f379f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Pipeline
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine pipeline (and its entry point, since it can be
+  either directly the backend or the frontend) is represented as an
+  extra node.
+
+  The Allwinner A10 Display pipeline is composed of several components
+  that are going to be documented below:
+
+  For all connections between components up to the TCONs in the
+  display pipeline, when there are multiple components of the same
+  type at the same depth, the local endpoint ID must be the same as
+  the remote component's index. For example, if the remote endpoint is
+  Frontend 1, then the local endpoint ID must be 1.
+
+  Frontend 0  [0] ------- [0]  Backend 0  [0] ------- [0]  TCON 0
+              [1] --   -- [1]             [1] --   -- [1]
+                    \ /                         \ /
+                     X                           X
+                    / \                         / \
+              [0] --   -- [0]             [0] --   -- [0]
+  Frontend 1  [1] ------- [1]  Backend 1  [1] ------- [1]  TCON 1
+
+  For a two pipeline system such as the one depicted above, the lines
+  represent the connections between the components, while the numbers
+  within the square brackets corresponds to the ID of the local endpoint.
+
+  The same rule also applies to DE 2.0 mixer-TCON connections:
+
+  Mixer 0  [0] ----------- [0]  TCON 0
+           [1] ----   ---- [1]
+                   \ /
+                    X
+                   / \
+           [0] ----   ---- [0]
+  Mixer 1  [1] ----------- [1]  TCON 1
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-engine
+      - allwinner,sun5i-a10s-display-engine
+      - allwinner,sun5i-a13-display-engine
+      - allwinner,sun6i-a31-display-engine
+      - allwinner,sun6i-a31s-display-engine
+      - allwinner,sun7i-a20-display-engine
+      - allwinner,sun8i-a23-display-engine
+      - allwinner,sun8i-a33-display-engine
+      - allwinner,sun8i-a83t-display-engine
+      - allwinner,sun8i-h3-display-engine
+      - allwinner,sun8i-r40-display-engine
+      - allwinner,sun8i-v3s-display-engine
+      - allwinner,sun9i-a80-display-engine
+      - allwinner,sun20i-d1-display-engine
+      - allwinner,sun50i-a64-display-engine
+      - allwinner,sun50i-h6-display-engine
+
+  allwinner,pipelines:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+    description: |
+      Available display engine frontends (DE 1.0) or mixers (DE
+      2.0/3.0) available.
+
+required:
+  - compatible
+  - allwinner,pipelines
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun4i-a10-display-engine
+          - allwinner,sun6i-a31-display-engine
+          - allwinner,sun6i-a31s-display-engine
+          - allwinner,sun7i-a20-display-engine
+          - allwinner,sun8i-a83t-display-engine
+          - allwinner,sun8i-r40-display-engine
+          - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
+          - allwinner,sun50i-a64-display-engine
+
+then:
+  properties:
+    allwinner,pipelines:
+      minItems: 2
+
+else:
+  properties:
+    allwinner,pipelines:
+      maxItems: 1
+
+examples:
+  - |
+      de: display-engine {
+          compatible = "allwinner,sun4i-a10-display-engine";
+          allwinner,pipelines = <&fe0>, <&fe1>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
new file mode 100644
index 0000000000..98e8240a05
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Frontend
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine frontend does formats conversion, scaling,
+  deinterlacing and color space conversion.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-frontend
+      - allwinner,sun5i-a13-display-frontend
+      - allwinner,sun6i-a31-display-frontend
+      - allwinner,sun7i-a20-display-frontend
+      - allwinner,sun8i-a23-display-frontend
+      - allwinner,sun8i-a33-display-frontend
+      - allwinner,sun9i-a80-display-frontend
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The frontend interface clock
+      - description: The frontend module clock
+      - description: The frontend DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    fe0: display-frontend@1e00000 {
+        compatible = "allwinner,sun4i-a10-display-frontend";
+        reg = <0x01e00000 0x20000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+                 <&ccu CLK_DRAM_DE_FE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_FE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fe0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                fe0_out_be0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_in_fe0>;
+                };
+
+                fe0_out_be1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_in_fe0>;
+                };
+            };
+        };
+    };
+
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
new file mode 100644
index 0000000000..55703caacb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 HDMI Controller
+
+description: |
+  The HDMI Encoder supports the HDMI video and audio outputs, and does
+  CEC. It is one end of the pipeline.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-hdmi
+      - const: allwinner,sun5i-a10s-hdmi
+      - const: allwinner,sun6i-a31-hdmi
+      - items:
+          - const: allwinner,sun7i-a20-hdmi
+          - const: allwinner,sun5i-a10s-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The first video PLL
+          - description: The second video PLL
+
+      - items:
+          - description: The HDMI interface clock
+          - description: The HDMI module clock
+          - description: The HDMI DDC clock
+          - description: The first video PLL
+          - description: The second video PLL
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: ahb
+          - const: mod
+          - const: pll-0
+          - const: pll-1
+
+      - items:
+          - const: ahb
+          - const: mod
+          - const: ddc
+          - const: pll-0
+          - const: pll-1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DDC Transmission DMA Channel
+      - description: DDC Reception DMA Channel
+      - description: Audio Transmission DMA Channel
+
+  dma-names:
+    items:
+      - const: ddc-tx
+      - const: ddc-rx
+      - const: audio-tx
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller. Usually an HDMI
+          connector.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun6i-a31-hdmi
+
+then:
+  properties:
+    clocks:
+      minItems: 5
+
+    clock-names:
+      minItems: 5
+
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/dma/sun4i-a10.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    hdmi: hdmi@1c16000 {
+        compatible = "allwinner,sun4i-a10-hdmi";
+        reg = <0x01c16000 0x1000>;
+        interrupts = <58>;
+        clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+                 <&ccu CLK_PLL_VIDEO0_2X>,
+                 <&ccu CLK_PLL_VIDEO1_2X>;
+        clock-names = "ahb", "mod", "pll-0", "pll-1";
+        dmas = <&dma SUN4I_DMA_NORMAL 16>,
+               <&dma SUN4I_DMA_NORMAL 16>,
+               <&dma SUN4I_DMA_DEDICATED 24>;
+        dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_in: port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                hdmi_in_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_out_hdmi>;
+                };
+
+                hdmi_in_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_out_hdmi>;
+                };
+            };
+
+            hdmi_out: port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
new file mode 100644
index 0000000000..724d93b919
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -0,0 +1,677 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Timings Controller (TCON)
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The TCON acts as a timing controller for RGB, LVDS and TV
+  interfaces.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-tcon
+      - const: allwinner,sun5i-a13-tcon
+      - const: allwinner,sun6i-a31-tcon
+      - const: allwinner,sun6i-a31s-tcon
+      - const: allwinner,sun7i-a20-tcon
+      - const: allwinner,sun8i-a23-tcon
+      - const: allwinner,sun8i-a33-tcon
+      - const: allwinner,sun8i-a83t-tcon-lcd
+      - const: allwinner,sun8i-a83t-tcon-tv
+      - const: allwinner,sun8i-r40-tcon-tv
+      - const: allwinner,sun8i-v3s-tcon
+      - const: allwinner,sun9i-a80-tcon-lcd
+      - const: allwinner,sun9i-a80-tcon-tv
+      - const: allwinner,sun20i-d1-tcon-lcd
+      - const: allwinner,sun20i-d1-tcon-tv
+
+      - items:
+          - enum:
+              - allwinner,sun7i-a20-tcon0
+              - allwinner,sun7i-a20-tcon1
+          - const: allwinner,sun7i-a20-tcon
+
+      - items:
+          - enum:
+              - allwinner,sun50i-a64-tcon-lcd
+          - const: allwinner,sun8i-a83t-tcon-lcd
+
+      - items:
+          - enum:
+              - allwinner,sun8i-h3-tcon-tv
+              - allwinner,sun50i-a64-tcon-tv
+          - const: allwinner,sun8i-a83t-tcon-tv
+
+      - items:
+          - enum:
+              - allwinner,sun50i-h6-tcon-tv
+          - const: allwinner,sun8i-r40-tcon-tv
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    description:
+      Name of the LCD pixel clock created.
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  resets:
+    anyOf:
+      - items:
+          - description: TCON Reset Line
+
+      - items:
+          - description: TCON Reset Line
+          - description: TCON LVDS Reset Line
+
+      - items:
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+
+      - items:
+          - description: TCON Reset Line
+          - description: TCON eDP Reset Line
+          - description: TCON LVDS Reset Line
+
+  reset-names:
+    oneOf:
+      - const: lcd
+
+      - items:
+          - const: lcd
+          - const: lvds
+
+      - items:
+          - const: lcd
+          - const: edp
+
+      - items:
+          - const: lcd
+          - const: edp
+          - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          Output endpoints of the controller.
+
+        patternProperties:
+          "^endpoint(@[0-9])$":
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              allwinner,tcon-channel:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                description: |
+                  TCON can have 1 or 2 channels, usually with the
+                  first channel being used for the panels interfaces
+                  (RGB, LVDS, etc.), and the second being used for the
+                  outputs that require another controller (TV Encoder,
+                  HDMI, etc.).
+
+                  If that property is present, specifies the TCON
+                  channel the endpoint is associated to. If that
+                  property is not present, the endpoint number will be
+                  used as the channel number.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-tcon
+              - allwinner,sun5i-a13-tcon
+              - allwinner,sun7i-a20-tcon
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+            - const: tcon-ch1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+            - const: tcon-ch1
+            - const: lvds-alt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+            - const: lvds-alt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun8i-v3s-tcon
+              - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a83t-tcon-tv
+              - allwinner,sun8i-r40-tcon-tv
+              - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun5i-a13-tcon
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+              - allwinner,sun7i-a20-tcon
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+              - allwinner,sun8i-v3s-tcon
+              - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun4i-a10-tcon
+              - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
+
+    then:
+      required:
+        - "#clock-cells"
+        - clock-output-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+              - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
+
+    then:
+      properties:
+        resets:
+          minItems: 2
+
+        reset-names:
+          items:
+            - const: lcd
+            - const: lvds
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun9i-a80-tcon-lcd
+
+    then:
+      properties:
+        resets:
+          minItems: 3
+
+        reset-names:
+          items:
+            - const: lcd
+            - const: edp
+            - const: lvds
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun9i-a80-tcon-tv
+
+    then:
+      properties:
+        resets:
+          minItems: 2
+
+        reset-names:
+          items:
+            - const: lcd
+            - const: edp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-tcon
+              - allwinner,sun5i-a13-tcon
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+              - allwinner,sun7i-a20-tcon
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+
+    then:
+      required:
+        - dmas
+
+examples:
+  - |
+    #include <dt-bindings/dma/sun4i-a10.h>
+
+    /*
+     * This comes from the clock/sun4i-a10-ccu.h and
+     * reset/sun4i-a10-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_AHB_LCD0	56
+    #define CLK_TCON0_CH0	149
+    #define CLK_TCON0_CH1	155
+    #define RST_TCON0		11
+
+    lcd-controller@1c0c000 {
+        compatible = "allwinner,sun4i-a10-tcon";
+        reg = <0x01c0c000 0x1000>;
+        interrupts = <44>;
+        resets = <&ccu RST_TCON0>;
+        reset-names = "lcd";
+        clocks = <&ccu CLK_AHB_LCD0>,
+                 <&ccu CLK_TCON0_CH0>,
+                 <&ccu CLK_TCON0_CH1>;
+        clock-names = "ahb",
+                      "tcon-ch0",
+                      "tcon-ch1";
+        clock-output-names = "tcon0-pixel-clock";
+        #clock-cells = <0>;
+        dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_out_tcon0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&hdmi_in_tcon0>;
+                    allwinner,tcon-channel = <1>;
+                };
+            };
+        };
+    };
+
+    #undef CLK_AHB_LCD0
+    #undef CLK_TCON0_CH0
+    #undef CLK_TCON0_CH1
+    #undef RST_TCON0
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun6i-a31-ccu.h and
+     * reset/sun6i-a31-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_PLL_MIPI	15
+    #define CLK_AHB1_LCD0	47
+    #define CLK_LCD0_CH0	127
+    #define CLK_LCD0_CH1	129
+    #define RST_AHB1_LCD0	27
+    #define RST_AHB1_LVDS	41
+
+    lcd-controller@1c0c000 {
+        compatible = "allwinner,sun6i-a31-tcon";
+        reg = <0x01c0c000 0x1000>;
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma 11>;
+        resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>;
+        reset-names = "lcd", "lvds";
+        clocks = <&ccu CLK_AHB1_LCD0>,
+                 <&ccu CLK_LCD0_CH0>,
+                 <&ccu CLK_LCD0_CH1>,
+                 <&ccu CLK_PLL_MIPI>;
+        clock-names = "ahb",
+                      "tcon-ch0",
+                      "tcon-ch1",
+                      "lvds-alt";
+        clock-output-names = "tcon0-pixel-clock";
+        #clock-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&drc0_out_tcon0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&drc1_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&hdmi_in_tcon0>;
+                    allwinner,tcon-channel = <1>;
+                };
+            };
+        };
+    };
+
+    #undef CLK_PLL_MIPI
+    #undef CLK_AHB1_LCD0
+    #undef CLK_LCD0_CH0
+    #undef CLK_LCD0_CH1
+    #undef RST_AHB1_LCD0
+    #undef RST_AHB1_LVDS
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun9i-a80-ccu.h and
+     * reset/sun9i-a80-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_LCD0	102
+    #define CLK_LCD0		58
+    #define RST_BUS_LCD0	22
+    #define RST_BUS_EDP		24
+    #define RST_BUS_LVDS	25
+
+    lcd-controller@3c00000 {
+        compatible = "allwinner,sun9i-a80-tcon-lcd";
+        reg = <0x03c00000 0x10000>;
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+        clock-names = "ahb", "tcon-ch0";
+        resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>;
+        reset-names = "lcd", "edp", "lvds";
+        clock-output-names = "tcon0-pixel-clock";
+        #clock-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&drc0_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    #undef CLK_BUS_TCON0
+    #undef CLK_TCON0
+    #undef RST_BUS_TCON0
+    #undef RST_BUS_EDP
+    #undef RST_BUS_LVDS
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a83t-ccu.h and
+     * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_TCON0	36
+    #define CLK_TCON0		85
+    #define RST_BUS_TCON0	22
+    #define RST_BUS_LVDS	31
+
+    lcd-controller@1c0c000 {
+        compatible = "allwinner,sun8i-a83t-tcon-lcd";
+        reg = <0x01c0c000 0x1000>;
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+        clock-names = "ahb", "tcon-ch0";
+        clock-output-names = "tcon-pixel-clock";
+        #clock-cells = <0>;
+        resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+        reset-names = "lcd", "lvds";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mixer0_out_tcon0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mixer1_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    #undef CLK_BUS_TCON0
+    #undef CLK_TCON0
+    #undef RST_BUS_TCON0
+    #undef RST_BUS_LVDS
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-r40-ccu.h and
+     * reset/sun8i-r40-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_TCON_TV0	73
+    #define RST_BUS_TCON_TV0	49
+
+    tcon_tv0: lcd-controller@1c73000 {
+        compatible = "allwinner,sun8i-r40-tcon-tv";
+        reg = <0x01c73000 0x1000>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+        clock-names = "ahb", "tcon-ch1";
+        resets = <&ccu RST_BUS_TCON_TV0>;
+        reset-names = "lcd";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+                };
+            };
+
+            tcon_tv0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+                };
+            };
+        };
+    };
+
+    #undef CLK_BUS_TCON_TV0
+    #undef RST_BUS_TCON_TV0
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
new file mode 100644
index 0000000000..c39e90a594
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TV Encoder
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-tv-encoder
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      The first port should be the input endpoint, usually coming from the
+      associated TCON.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    tve0: tv-encoder@1c0a000 {
+        compatible = "allwinner,sun4i-a10-tv-encoder";
+        reg = <0x01c0a000 0x1000>;
+        clocks = <&ahb_gates 34>;
+        resets = <&tcon_ch0_clk 0>;
+
+        port {
+            tve0_in_tcon0: endpoint {
+                remote-endpoint = <&tcon0_out_tve0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
new file mode 100644
index 0000000000..895506d93f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Dynamic Range Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The DRC (Dynamic Range Controller) allows to dynamically adjust
+  pixel brightness/contrast based on histogram measurements for LCD
+  content adaptive backlight control.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-drc
+      - allwinner,sun6i-a31s-drc
+      - allwinner,sun8i-a23-drc
+      - allwinner,sun8i-a33-drc
+      - allwinner,sun9i-a80-drc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DRC interface clock
+      - description: The DRC module clock
+      - description: The DRC DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+    #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+    drc0: drc@1e70000 {
+        compatible = "allwinner,sun6i-a31-drc";
+        reg = <0x01e70000 0x10000>;
+        interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+                 <&ccu CLK_DRAM_DRC0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_AHB1_DRC0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            drc0_in: port@0 {
+                reg = <0>;
+
+                drc0_in_be0: endpoint {
+                    remote-endpoint = <&be0_out_drc0>;
+                };
+            };
+
+            drc0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                drc0_out_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_drc0>;
+                };
+
+                drc0_out_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_drc0>;
+                };
+            };
+        };
+    };
+
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
new file mode 100644
index 0000000000..c731fbdc2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI-DSI Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun6i-a31-mipi-dsi
+          - allwinner,sun50i-a64-mipi-dsi
+          - allwinner,sun50i-a100-mipi-dsi
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dsi
+          - const: allwinner,sun50i-a100-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  vcc-dsi-supply:
+    description: VCC-DSI power supply of the DSI encoder
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      The port should be the input endpoint, usually coming from the
+      associated TCON.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - phys
+  - phy-names
+  - resets
+  - port
+
+allOf:
+  - $ref: dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a100-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a64-mipi-dsi
+
+    then:
+      required:
+        - vcc-dsi-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi0: dsi@1ca0000 {
+        compatible = "allwinner,sun6i-a31-mipi-dsi";
+        reg = <0x01ca0000 0x1000>;
+        interrupts = <0 89 4>;
+        clocks = <&ccu 23>, <&ccu 96>;
+        clock-names = "bus", "mod";
+        resets = <&ccu 4>;
+        phys = <&dphy0>;
+        phy-names = "dphy";
+        vcc-dsi-supply = <&reg_dcdc1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+                compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+                reg = <0>;
+                power-supply = <&reg_display>;
+                reset-gpios = <&r_pio 0 5 1>; /* PL05 */
+                backlight = <&pwm_bl>;
+        };
+
+        port {
+            dsi0_in_tcon0: endpoint {
+                remote-endpoint = <&tcon0_out_dsi0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
new file mode 100644
index 0000000000..b75c1ec686
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Display Engine 2.0 Mixer
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-de2-mixer-0
+      - allwinner,sun8i-a83t-de2-mixer-1
+      - allwinner,sun8i-h3-de2-mixer-0
+      - allwinner,sun8i-r40-de2-mixer-0
+      - allwinner,sun8i-r40-de2-mixer-1
+      - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun20i-d1-de2-mixer-0
+      - allwinner,sun20i-d1-de2-mixer-1
+      - allwinner,sun50i-a64-de2-mixer-0
+      - allwinner,sun50i-a64-de2-mixer-1
+      - allwinner,sun50i-h6-de3-mixer-0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The mixer interface clock
+      - description: The mixer module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  iommus:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-de2.h>
+    #include <dt-bindings/reset/sun8i-de2.h>
+
+    mixer0: mixer@1100000 {
+        compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+        reg = <0x01100000 0x100000>;
+        clocks = <&display_clocks CLK_BUS_MIXER0>,
+                 <&display_clocks CLK_MIXER0>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&display_clocks RST_MIXER0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mixer0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mixer0_out_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_mixer0>;
+                };
+
+                mixer0_out_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_mixer0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
new file mode 100644
index 0000000000..60fd927b5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t DWC HDMI TX Encoder
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
+  IP with Allwinner\'s own PHY IP. It supports audio and video outputs
+  and CEC.
+
+  These DT bindings follow the Synopsys DWC HDMI TX bindings defined
+  in bridge/synopsys,dw-hdmi.yaml with the following device-specific
+  properties.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-dw-hdmi
+      - const: allwinner,sun50i-h6-dw-hdmi
+
+      - items:
+          - enum:
+              - allwinner,sun8i-h3-dw-hdmi
+              - allwinner,sun8i-r40-dw-hdmi
+              - allwinner,sun50i-a64-dw-hdmi
+          - const: allwinner,sun8i-a83t-dw-hdmi
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Bus Clock
+      - description: Register Clock
+      - description: TMDS Clock
+      - description: HDMI CEC Clock
+      - description: HDCP Clock
+      - description: HDCP Bus Clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: iahb
+      - const: isfr
+      - const: tmds
+      - const: cec
+      - const: hdcp
+      - const: hdcp-bus
+
+  resets:
+    minItems: 1
+    items:
+      - description: HDMI Controller Reset
+      - description: HDCP Reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: ctrl
+      - const: hdcp
+
+  phys:
+    maxItems: 1
+    description:
+      Phandle to the DWC HDMI PHY.
+
+  phy-names:
+    const: phy
+
+  hvcc-supply:
+    description:
+      The VCC power supply of the controller
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller. Usually the associated
+          TCON.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller. Usually an HDMI
+          connector.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-h6-dw-hdmi
+
+then:
+  properties:
+    clocks:
+      minItems: 6
+
+    clock-names:
+      minItems: 6
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a83t-ccu.h and
+     * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+    #define CLK_BUS_HDMI	39
+    #define CLK_HDMI		93
+    #define CLK_HDMI_SLOW	94
+    #define RST_BUS_HDMI1	26
+
+    hdmi@1ee0000 {
+        compatible = "allwinner,sun8i-a83t-dw-hdmi";
+        reg = <0x01ee0000 0x10000>;
+        reg-io-width = <1>;
+        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                 <&ccu CLK_HDMI>;
+        clock-names = "iahb", "isfr", "tmds";
+        resets = <&ccu RST_BUS_HDMI1>;
+        reset-names = "ctrl";
+        phys = <&hdmi_phy>;
+        phy-names = "phy";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pins>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&tcon1_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    /* Cleanup after ourselves */
+    #undef CLK_BUS_HDMI
+    #undef CLK_HDMI
+    #undef CLK_HDMI_SLOW
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun50i-h6-ccu.h and
+     * reset/sun50i-h6-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+    #define CLK_BUS_HDMI	126
+    #define CLK_BUS_HDCP	137
+    #define CLK_HDMI		123
+    #define CLK_HDMI_SLOW	124
+    #define CLK_HDMI_CEC	125
+    #define CLK_HDCP		136
+    #define RST_BUS_HDMI_SUB	57
+    #define RST_BUS_HDCP	62
+
+    hdmi@6000000 {
+        compatible = "allwinner,sun50i-h6-dw-hdmi";
+        reg = <0x06000000 0x10000>;
+        reg-io-width = <1>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+                 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+        clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+                      "hdcp-bus";
+        resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+        reset-names = "ctrl", "hdcp";
+        phys = <&hdmi_phy>;
+        phy-names = "phy";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pins>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
new file mode 100644
index 0000000000..1b47f3d99a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t HDMI PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-hdmi-phy
+      - allwinner,sun8i-h3-hdmi-phy
+      - allwinner,sun8i-r40-hdmi-phy
+      - allwinner,sun50i-a64-hdmi-phy
+      - allwinner,sun50i-h6-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: Parent of the PHY clock
+      - description: Second possible parent of the PHY clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: bus
+      - const: mod
+      - const: pll-0
+      - const: pll-1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun8i-r40-hdmi-phy
+
+then:
+  properties:
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun8i-h3-hdmi-phy
+            - allwinner,sun50i-a64-hdmi-phy
+
+  then:
+    properties:
+      clocks:
+        minItems: 3
+
+      clock-names:
+        minItems: 3
+
+  else:
+    properties:
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    hdmi_phy: hdmi-phy@1ef0000 {
+        compatible = "allwinner,sun8i-a83t-hdmi-phy";
+        reg = <0x01ef0000 0x10000>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_HDMI0>;
+        reset-names = "phy";
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
new file mode 100644
index 0000000000..7d849c4095
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -0,0 +1,329 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 TCON TOP
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  TCON TOPs main purpose is to configure whole display pipeline. It
+  determines relationships between mixers and TCONs, selects source
+  TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV
+  encoder clock source and contains additional TV TCON and DSI gates.
+
+  It allows display pipeline to be configured in very different ways:
+
+                                  / LCD0/LVDS0
+                   / [0] TCON-LCD0
+                   |              \ MIPI DSI
+   mixer0          |
+          \        / [1] TCON-LCD1 - LCD1/LVDS1
+           TCON-TOP
+          /        \ [2] TCON-TV0 [0] - TVE0/RGB
+   mixer1          |                  \
+                   |                   TCON-TOP - HDMI
+                   |                  /
+                   \ [3] TCON-TV1 [1] - TVE1/RGB
+
+  Note that both TCON TOP references same physical unit. Both mixers
+  can be connected to any TCON. Not all TCON TOP variants support all
+  features.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun20i-d1-tcon-top
+      - allwinner,sun50i-h6-tcon-top
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 6
+
+  clock-names:
+    minItems: 2
+    maxItems: 6
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 3
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoint for Mixer 0 mux.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoint for Mixer 0 mux
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoint for Mixer 1 mux.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoint for Mixer 1 mux
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoint for HDMI mux.
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoint for HDMI mux
+
+    required:
+      - port@0
+      - port@1
+      - port@4
+      - port@5
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-r40-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP TV1 clock
+            - description: The TCON TOP TVE1 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: tcon-tv1
+            - const: tve1
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: TCON TV1 output clock name
+            - description: DSI output clock name
+
+        ports:
+          required:
+            - port@2
+            - port@3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun20i-d1-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: DSI output clock name
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+      tcon_top: tcon-top@1c70000 {
+          compatible = "allwinner,sun8i-r40-tcon-top";
+          reg = <0x01c70000 0x1000>;
+          clocks = <&ccu CLK_BUS_TCON_TOP>,
+                   <&ccu CLK_TCON_TV0>,
+                   <&ccu CLK_TVE0>,
+                   <&ccu CLK_TCON_TV1>,
+                   <&ccu CLK_TVE1>,
+                   <&ccu CLK_DSI_DPHY>;
+          clock-names = "bus",
+                        "tcon-tv0",
+                        "tve0",
+                        "tcon-tv1",
+                        "tve1",
+                        "dsi";
+          clock-output-names = "tcon-top-tv0",
+                               "tcon-top-tv1",
+                               "tcon-top-dsi";
+          resets = <&ccu RST_BUS_TCON_TOP>;
+          #clock-cells = <1>;
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              tcon_top_mixer0_in: port@0 {
+                  reg = <0>;
+
+                  tcon_top_mixer0_in_mixer0: endpoint {
+                      remote-endpoint = <&mixer0_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_mixer0_out: port@1 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <1>;
+
+                  tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+                      reg = <0>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+                      reg = <1>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+                      reg = <2>;
+                      remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+                      reg = <3>;
+                      remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+                  };
+              };
+
+              tcon_top_mixer1_in: port@2 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <2>;
+
+                  tcon_top_mixer1_in_mixer1: endpoint@1 {
+                      reg = <1>;
+                      remote-endpoint = <&mixer1_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_mixer1_out: port@3 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <3>;
+
+                  tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+                      reg = <0>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+                      reg = <1>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+                      reg = <2>;
+                      remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+                      reg = <3>;
+                      remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+                  };
+              };
+
+              tcon_top_hdmi_in: port@4 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <4>;
+
+                  tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+                      reg = <0>;
+                      remote-endpoint = <&tcon_tv0_out_tcon_top>;
+                  };
+
+                  tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+                      reg = <1>;
+                      remote-endpoint = <&tcon_tv1_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_hdmi_out: port@5 {
+                  reg = <5>;
+
+                  tcon_top_hdmi_out_hdmi: endpoint {
+                      remote-endpoint = <&hdmi_in_tcon_top>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
new file mode 100644
index 0000000000..193afee2c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Detail Enhancement Unit
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
+  can sharpen the display content in both luma and chroma channels.
+
+properties:
+  compatible:
+    const: allwinner,sun9i-a80-deu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DEU interface clock
+      - description: The DEU module clock
+      - description: The DEU DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun9i-a80-de.h>
+    #include <dt-bindings/reset/sun9i-a80-de.h>
+
+    deu0: deu@3300000 {
+        compatible = "allwinner,sun9i-a80-deu";
+        reg = <0x03300000 0x40000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&de_clocks CLK_BUS_DEU0>,
+                 <&de_clocks CLK_IEP_DEU0>,
+                 <&de_clocks CLK_DRAM_DEU0>;
+        clock-names = "ahb",
+                      "mod",
+                      "ram";
+        resets = <&de_clocks RST_DEU0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            deu0_in: port@0 {
+                reg = <0>;
+
+                deu0_in_fe0: endpoint {
+                    remote-endpoint = <&fe0_out_deu0>;
+                };
+            };
+
+            deu0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                deu0_out_be0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_in_deu0>;
+                };
+
+                deu0_out_be1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_in_deu0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
new file mode 100644
index 0000000000..0c85894648
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+description: |
+  The Amlogic Meson Synopsys Designware Integration is composed of
+  - A Synopsys DesignWare HDMI Controller IP
+  - A TOP control block controlling the Clocks and PHY
+  - A custom HDMI PHY in order to convert video to TMDS signal
+   ___________________________________
+  |            HDMI TOP               |<= HPD
+  |___________________________________|
+  |                  |                |
+  |  Synopsys HDMI   |   HDMI PHY     |=> TMDS
+  |    Controller    |________________|
+  |___________________________________|<=> DDC
+
+  The HDMI TOP block only supports HPD sensing.
+  The Synopsys HDMI Controller interrupt is routed through the
+  TOP Block interrupt.
+  Communication to the TOP Block and the Synopsys HDMI Controller is done
+  via a pair of dedicated addr+read/write registers.
+  The HDMI PHY is configured by registers in the HHI register block.
+
+  Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux
+  selects either the ENCI encoder for the 576i or 480i formats or the ENCP
+  encoder for all the other formats including interlaced HD formats.
+
+  The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
+  DVI timings for the HDMI controller.
+
+  Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
+  HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
+  audio source interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-dw-hdmi # GXBB (S905)
+              - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D)
+              - amlogic,meson-gxm-dw-hdmi # GXM (S912)
+          - const: amlogic,meson-gx-dw-hdmi
+      - enum:
+          - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2)
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: isfr
+      - const: iahb
+      - const: venci
+
+  resets:
+    minItems: 3
+
+  reset-names:
+    items:
+      - const: hdmitx_apb
+      - const: hdmitx
+      - const: hdmitx_phy
+
+  hdmi-supply:
+    description: phandle to an external 5V regulator to power the HDMI logic
+
+  port@0:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the VENC Input port node.
+
+  port@1:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the TMDS Output port node.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#sound-dai-cells":
+    const: 0
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port@0
+  - port@1
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_tx: hdmi-tx@c883a000 {
+        compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+        reg = <0xc883a000 0x1c>;
+        interrupts = <57>;
+        resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>;
+        reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+        clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
+        clock-names = "isfr", "iahb", "venci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* VPU VENC Input */
+        hdmi_tx_venc_port: port@0 {
+            reg = <0>;
+
+            hdmi_tx_in: endpoint {
+                remote-endpoint = <&hdmi_tx_out>;
+            };
+        };
+
+        /* TMDS Output */
+        hdmi_tx_tmds_port: port@1 {
+             reg = <1>;
+
+             hdmi_tx_tmds_out: endpoint {
+                 remote-endpoint = <&hdmi_connector_in>;
+             };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
new file mode 100644
index 0000000000..a3428f0120
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic Meson Synopsys Designware Integration is composed of
+  - A Synopsys DesignWare MIPI DSI Host Controller IP
+  - A TOP control block controlling the Clocks & Resets of the IP
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-dw-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: bit
+      - const: px
+      - const: meas
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: top
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@6000 {
+          compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+          reg = <0x6000 0x400>;
+          resets = <&reset_top>;
+          reset-names = "top";
+          clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>;
+          clock-names = "pclk", "bit", "px";
+          phys = <&mipi_dphy>;
+          phy-names = "dphy";
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              /* VPU VENC Input */
+              mipi_dsi_venc_port: port@0 {
+                  reg = <0>;
+
+                  mipi_dsi_in: endpoint {
+                       remote-endpoint = <&dpi_out>;
+                  };
+              };
+
+              /* DSI Output */
+              mipi_dsi_panel_port: port@1 {
+                  reg = <1>;
+
+                  mipi_out_panel: endpoint {
+                      remote-endpoint = <&mipi_in_panel>;
+                  };
+              };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
new file mode 100644
index 0000000000..cb0a90f023
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Display Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic Meson Display controller is composed of several components
+  that are going to be documented below
+
+  DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
+     | vd1   _______     _____________    _________________     |               |
+  D  |-------|      |----|            |   |                |    |   HDMI PLL    |
+  D  | vd2   | VIU  |    | Video Post |   | Video Encoders |<---|-----VCLK      |
+  R  |-------|      |----| Processing |   |                |    |               |
+     | osd2  |      |    |            |---| Enci ----------|----|-----VDAC------|
+  R  |-------| CSC  |----| Scalers    |   | Encp ----------|----|----HDMI-TX----|
+  A  | osd1  |      |    | Blenders   |   | Encl ----------|----|---------------|
+  M  |-------|______|----|____________|   |________________|    |               |
+  ___|__________________________________________________________|_______________|
+
+
+  VIU: Video Input Unit
+  ---------------------
+
+  The Video Input Unit is in charge of the pixel scanout from the DDR memory.
+  It fetches the frames addresses, stride and parameters from the "Canvas" memory.
+  This part is also in charge of the CSC (Colorspace Conversion).
+  It can handle 2 OSD Planes and 2 Video Planes.
+
+  VPP: Video Post Processing
+  --------------------------
+
+  The Video Post Processing is in charge of the scaling and blending of the
+  various planes into a single pixel stream.
+  There is a special "pre-blending" used by the video planes with a dedicated
+  scaler and a "post-blending" to merge with the OSD Planes.
+  The OSD planes also have a dedicated scaler for one of the OSD.
+
+  VENC: Video Encoders
+  --------------------
+
+  The VENC is composed of the multiple pixel encoders
+   - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
+   - ENCP : Progressive Video Encoder for HDMI
+   - ENCL : LCD LVDS Encoder
+  The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
+  tree and provides the scanout clock to the VPP and VIU.
+  The ENCI is connected to a single VDAC for Composite Output.
+  The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-vpu # GXBB (S905)
+              - amlogic,meson-gxl-vpu # GXL (S905X, S905D)
+              - amlogic,meson-gxm-vpu # GXM (S912)
+          - const: amlogic,meson-gx-vpu
+      - enum:
+          - amlogic,meson-g12a-vpu # G12A (S905X2, S905Y2, S905D2)
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: vpu
+      - const: hhi
+
+  interrupts:
+    maxItems: 1
+
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  port@0:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the CVBS VDAC port node.
+
+  port@1:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the HDMI-TX port node.
+
+  port@2:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver).
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port@0
+  - port@1
+  - "#address-cells"
+  - "#size-cells"
+  - amlogic,canvas
+
+additionalProperties: false
+
+examples:
+  - |
+    vpu: vpu@d0100000 {
+        compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+        reg = <0xd0100000 0x100000>, <0xc883c000 0x1000>;
+        reg-names = "vpu", "hhi";
+        interrupts = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
+
+        /* CVBS VDAC output port */
+        port@0 {
+            reg = <0>;
+
+            cvbs_vdac_out: endpoint {
+                remote-endpoint = <&tv_connector_in>;
+            };
+        };
+
+        /* HDMI TX output port */
+        port@1 {
+            reg = <1>;
+
+            hdmi_tx_out: endpoint {
+                remote-endpoint = <&hdmi_tx_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 0000000000..9a30e9005e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm HDLCD is a display controller found on several development platforms
+  produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+  RGB streamer that reads the data from a framebuffer and sends it to a single
+  digital encoder (DVI or HDMI).
+
+properties:
+  compatible:
+    const: arm,hdlcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: pxlclk
+
+  clocks:
+    maxItems: 1
+    description: The input reference for the pixel clock.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - port
+
+examples:
+  - |
+    hdlcd@2b000000 {
+        compatible = "arm,hdlcd";
+        reg = <0x2b000000 0x1000>;
+        interrupts = <0 85 4>;
+        clocks = <&oscclk5>;
+        clock-names = "pxlclk";
+        port {
+            hdlcd_output: endpoint {
+                remote-endpoint = <&hdmi_enc_input>;
+            };
+        };
+    };
+
+    /* HDMI encoder on I2C bus */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi-transmitter@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            port {
+                hdmi_enc_input: endpoint {
+                    remote-endpoint = <&hdlcd_output>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 0000000000..3ad3eef89c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Mali D71 display processor supports up to two displays with up
+  to a 4K resolution each. Each pipeline can be composed of up to four
+  layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mali-d32
+          - const: arm,mali-d71
+      - const: arm,mali-d71
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aclk
+
+  clocks:
+    maxItems: 1
+    description: The main DPU processor clock
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    description:
+      The stream IDs for each of the used pipelines, each four IDs for the
+      four layers, plus one for the write-back stream.
+    minItems: 5
+    maxItems: 10
+
+patternProperties:
+  '^pipeline@[01]$':
+    type: object
+    additionalProperties: false
+    description:
+      clocks
+
+    properties:
+      reg:
+        enum: [ 0, 1 ]
+
+      clock-names:
+        const: pxclk
+
+      clocks:
+        maxItems: 1
+        description: The input reference for the pixel clock.
+
+      port:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - pipeline@0
+
+examples:
+  - |
+    display@c00000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "arm,mali-d71";
+        reg = <0xc00000 0x20000>;
+        interrupts = <168>;
+        clocks = <&dpu_aclk>;
+        clock-names = "aclk";
+        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+                 <&smmu 8>,
+                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+                 <&smmu 9>;
+
+        dp0_pipe0: pipeline@0 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <0>;
+
+            port {
+                dp0_pipe0_out: endpoint {
+                    remote-endpoint = <&db_dvi0_in>;
+                };
+            };
+        };
+
+        dp0_pipe1: pipeline@1 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <1>;
+
+            port {
+                dp0_pipe1_out: endpoint {
+                    remote-endpoint = <&db_dvi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 0000000000..91812573fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP)
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-value = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 0000000000..6cc9045e5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+  a framebuffer region in system memory, and creates timed signals for
+  a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl110
+          - arm,pl111
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl110
+          - arm,pl111
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The IP provides four individual interrupt lines, but also one
+          combined line. If the integration only connects this line to the
+          interrupt controller, this single interrupt is noted here.
+      - items:
+          - const: mbe        # CLCDMBEINTR
+          - const: vcomp      # CLCDVCOMPINTR
+          - const: lnbu       # CLCDLNBUINTR
+          - const: fuf        # CLCDFUFINTR
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: clcdclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: The CLCDCLK reference clock for the controller.
+      - description: The HCLK AHB slave clock for the register access.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum bandwidth in bytes per second that the cell's memory interface
+      can handle.
+      If not present, the memory interface is fast enough to handle all
+      possible video modes.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          arm,pl11x,tft-r0g0b0-pads:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: index of CLD pad used for first red bit (R0)
+              - description: index of CLD pad used for first green bit (G0)
+              - description: index of CLD pad used for first blue bit (G0)
+            deprecated: true
+            description: |
+              DEPRECATED. An array of three 32-bit values, defining the way
+              CLD[23:0] pads are wired up.
+              The first value contains the index of the "CLD" external pin (pad)
+              used as R0 (first bit of the red component), the second value for
+              green, the third value for blue.
+              See also "LCD panel signal multiplexing details" paragraphs in the
+              PL110/PL111 Technical Reference Manuals.
+              This implicitly defines available color modes, for example:
+              - PL111 TFT 4:4:4 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+              - PL110 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+              - PL111 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+              - PL111 TFT 5:6:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+              - PL110 and PL111 TFT 8:8:8 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+              - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+                  arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - port
+
+allOf:
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+examples:
+  - |
+    clcd@10020000 {
+        compatible = "arm,pl111", "arm,primecell";
+        reg = <0x10020000 0x1000>;
+        interrupt-names = "combined";
+        interrupts = <44>;
+        clocks = <&oscclk1>, <&oscclk2>;
+        clock-names = "clcdclk", "apb_pclk";
+        max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+        port {
+            clcd_pads: endpoint {
+                remote-endpoint = <&clcd_panel>;
+            };
+        };
+    };
+
+    panel {
+        compatible = "arm,rtsm-display";
+
+        port {
+            clcd_panel: endpoint {
+                remote-endpoint = <&clcd_pads>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt b/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt
new file mode 100644
index 0000000000..46525ea3e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt
@@ -0,0 +1,30 @@
+Device Tree bindings for Armada DRM CRTC driver
+
+Required properties:
+ - compatible: value should be "marvell,dove-lcd".
+ - reg: base address and size of the LCD controller
+ - interrupts: single interrupt number for the LCD controller
+ - port: video output port with endpoints, as described by graph.txt
+
+Optional properties:
+
+ - clocks: as described by clock-bindings.txt
+ - clock-names: as described by clock-bindings.txt
+	"axiclk" - axi bus clock for pixel clock
+	"plldivider" - pll divider clock for pixel clock
+	"ext_ref_clk0" - external clock 0 for pixel clock
+	"ext_ref_clk1" - external clock 1 for pixel clock
+
+Note: all clocks are optional but at least one must be specified.
+Further clocks may be added in the future according to requirements of
+different SoCs.
+
+Example:
+
+	lcd0: lcd-controller@820000 {
+		compatible = "marvell,dove-lcd";
+		reg = <0x820000 0x1000>;
+		interrupts = <47>;
+		clocks = <&si5351 0>;
+		clock-names = "ext_ref_clk_1";
+	};
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
new file mode 100644
index 0000000000..b5e355ada2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
@@ -0,0 +1,87 @@
+Atmel LCDC Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible :
+	"atmel,at91sam9261-lcdc" , 
+	"atmel,at91sam9263-lcdc" ,
+	"atmel,at91sam9g10-lcdc" ,
+	"atmel,at91sam9g45-lcdc" ,
+	"atmel,at91sam9g45es-lcdc" ,
+	"atmel,at91sam9rl-lcdc" ,
+- reg : Should contain 1 register ranges(address and length).
+	Can contain an additional register range(address and length)
+	for fixed framebuffer memory. Useful for dedicated memories.
+- interrupts : framebuffer controller interrupt
+- display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+	This should be in the board dts.
+- default-mode: a videomode within the display with timing parameters
+	as specified below.
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+
+	fb0: fb@00500000 {
+		compatible = "atmel,at91sam9g45-lcdc";
+		reg = <0x00500000 0x1000>;
+		interrupts = <23 3 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fb>;
+		display = <&display0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+	};
+
+Example for fixed framebuffer memory:
+
+	fb0: fb@00500000 {
+		compatible = "atmel,at91sam9263-lcdc";
+		reg = <0x00700000 0x1000 0x70000000 0x200000>;
+		[...]
+	};
+
+Atmel LCDC Display
+-----------------------------------------------------
+Required properties (as per of_videomode_helper):
+
+ - atmel,dmacon: dma controller configuration
+ - atmel,lcdcon2: lcd controller configuration
+ - atmel,guard-time: lcd guard time (Delay in frame periods)
+ - bits-per-pixel: lcd panel bit-depth.
+
+Optional properties (as per of_videomode_helper):
+ - atmel,lcdcon-backlight: enable backlight
+ - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
+ - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
+ - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
+
+Example:
+	display0: display {
+		bits-per-pixel = <32>;
+		atmel,lcdcon-backlight;
+		atmel,dmacon = <0x1>;
+		atmel,lcdcon2 = <0x80008002>;
+		atmel,guard-time = <9>;
+		atmel,lcd-wiring-mode = <1>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <1>;
+				hfront-porch = <1>;
+				vback-porch = <40>;
+				vfront-porch = <1>;
+				hsync-len = <45>;
+				vsync-len = <1>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
new file mode 100644
index 0000000000..923aea2534
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
@@ -0,0 +1,75 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
+
+The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
+See ../../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be "atmel,hlcdc-display-controller"
+ - pinctrl-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the default pinctrl states.
+ - #address-cells: should be set to 1.
+ - #size-cells: should be set to 0.
+
+Required children nodes:
+ Children nodes are encoding available output ports and their connections
+ to external devices using the OF graph representation (see ../graph.txt).
+ At least one port node is required.
+
+Optional properties in grandchild nodes:
+ Any endpoint grandchild node may specify a desired video interface
+ according to ../../media/video-interfaces.txt, specifically
+ - bus-width: recognized values are <12>, <16>, <18> and <24>, and
+   override any output mode selection heuristic, forcing "rgb444",
+   "rgb565", "rgb666" and "rgb888" respectively.
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+
+		hlcdc-display-controller {
+			compatible = "atmel,hlcdc-display-controller";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				hlcdc_panel_output: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};
+
+Example 2: With a video interface override to force rgb565; as above
+but with these changes/additions:
+
+	&hlcdc {
+		hlcdc-display-controller {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+			port@0 {
+				hlcdc_panel_output: endpoint@0 {
+					bus-width = <16>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
new file mode 100644
index 0000000000..5b35adf34c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi0
+      - brcm,bcm2711-hdmi1
+
+  reg:
+    items:
+      - description: HDMI controller register range
+      - description: DVP register range
+      - description: HDMI PHY register range
+      - description: Rate Manager register range
+      - description: Packet RAM register range
+      - description: Metadata RAM register range
+      - description: CSC register range
+      - description: CEC register range
+      - description: HD register range
+
+  reg-names:
+    items:
+      - const: hdmi
+      - const: dvp
+      - const: phy
+      - const: rm
+      - const: packet
+      - const: metadata
+      - const: csc
+      - const: cec
+      - const: hd
+
+  clocks:
+    items:
+      - description: The HDMI state machine clock
+      - description: The Pixel BVB clock
+      - description: The HDMI Audio parent clock
+      - description: The HDMI CEC parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: bvb
+      - const: audio
+      - const: cec
+
+  interrupts:
+    items:
+      - description: CEC TX interrupt
+      - description: CEC RX interrupt
+      - description: CEC stuck at low interrupt
+      - description: Wake-up interrupt
+      - description: Hotplug connected interrupt
+      - description: Hotplug removed interrupt
+
+  interrupt-names:
+    items:
+      - const: cec-tx
+      - const: cec-rx
+      - const: cec-low
+      - const: wakeup
+      - const: hpd-connected
+      - const: hpd-removed
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the I2C controller used for DDC EDID probing
+
+  hpd-gpios:
+    maxItems: 1
+    description: >
+      The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+      as an interrupt/status bit in the HDMI controller itself)
+
+  dmas:
+    maxItems: 1
+    description: >
+      Should contain one entry pointing to the DMA channel used to
+      transfer audio data.
+
+  dma-names:
+    const: audio-rx
+
+  resets:
+    maxItems: 1
+
+  wifi-2.4ghz-coexistence:
+    type: boolean
+    description: >
+      Should the pixel frequencies in the WiFi frequencies range be
+      avoided?
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - ddc
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi0: hdmi@7ef00700 {
+        compatible = "brcm,bcm2711-hdmi0";
+        reg = <0x7ef00700 0x300>,
+              <0x7ef00300 0x200>,
+              <0x7ef00f00 0x80>,
+              <0x7ef00f80 0x80>,
+              <0x7ef01b00 0x200>,
+              <0x7ef01f00 0x400>,
+              <0x7ef00200 0x80>,
+              <0x7ef04300 0x100>,
+              <0x7ef20000 0x100>;
+        reg-names = "hdmi",
+                    "dvp",
+                    "phy",
+                    "rm",
+                    "packet",
+                    "metadata",
+                    "csc",
+                    "cec",
+                    "hd";
+        clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+        clock-names = "hdmi", "bvb", "audio", "cec";
+        resets = <&dvp 0>;
+        ddc = <&ddc0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
new file mode 100644
index 0000000000..c9ad0ecc9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) DPI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-dpi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The core clock the unit runs on
+      - description: The pixel clock that feeds the pixelvalve
+
+  clock-names:
+    items:
+      - const: core
+      - const: pixel
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Port node with a single endpoint connecting to the panel.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    dpi: dpi@7e208000 {
+        compatible = "brcm,bcm2835-dpi";
+        reg = <0x7e208000 0x8c>;
+        clocks = <&clocks BCM2835_CLOCK_VPU>,
+                 <&clocks BCM2835_CLOCK_DPI>;
+        clock-names = "core", "pixel";
+
+        port {
+            dpi_out: endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
new file mode 100644
index 0000000000..c8b2459d64
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) DSI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - brcm,bcm2711-dsi1
+      - brcm,bcm2835-dsi0
+      - brcm,bcm2835-dsi1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DSI PLL clock feeding the DSI analog PHY
+      - description: The DSI ESC clock
+      - description: The DSI pixel clock
+
+  clock-names:
+    items:
+      - const: phy
+      - const: escape
+      - const: pixel
+
+  clock-output-names: true
+    # FIXME: The meta-schemas don't seem to allow it for now
+    # items:
+    #   - description: The DSI byte clock for the PHY
+    #   - description: The DSI DDR2 clock
+    #   - description: The DSI DDR clock
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    dsi1: dsi@7e700000 {
+        compatible = "brcm,bcm2835-dsi1";
+        reg = <0x7e700000 0x8c>;
+        interrupts = <2 12>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <1>;
+
+        clocks = <&clocks BCM2835_PLLD_DSI1>,
+                 <&clocks BCM2835_CLOCK_DSI1E>,
+                 <&clocks BCM2835_CLOCK_DSI1P>;
+        clock-names = "phy", "escape", "pixel";
+
+        clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
+
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
new file mode 100644
index 0000000000..48c8cad0d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) HDMI Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-hdmi
+
+  reg:
+    items:
+      - description: HDMI register range
+      - description: HD register range
+
+  interrupts:
+    minItems: 2
+
+  clocks:
+    items:
+      - description: The pixel clock
+      - description: The HDMI state machine clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: hdmi
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the I2C controller used for DDC EDID probing
+
+  hpd-gpios:
+    maxItems: 1
+    description: >
+      The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+      as an interrupt/status bit in the HDMI controller itself)
+
+  dmas:
+    maxItems: 1
+    description: >
+      Should contain one entry pointing to the DMA channel used to
+      transfer audio data.
+
+  dma-names:
+    const: audio-rx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - ddc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    hdmi: hdmi@7e902000 {
+        compatible = "brcm,bcm2835-hdmi";
+        reg = <0x7e902000 0x600>,
+              <0x7e808000 0x100>;
+        interrupts = <2 8>, <2 9>;
+        ddc = <&i2c2>;
+        hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+        clocks = <&clocks BCM2835_PLLH_PIX>,
+                 <&clocks BCM2835_CLOCK_HSM>;
+        clock-names = "pixel", "hdmi";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
new file mode 100644
index 0000000000..2e8566f47e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) Hardware Video Scaler
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hvs
+      - brcm,bcm2835-hvs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Core Clock
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: brcm,bcm2711-hvs
+
+then:
+  required:
+    - clocks
+
+examples:
+  - |
+    hvs@7e400000 {
+        compatible = "brcm,bcm2835-hvs";
+        reg = <0x7e400000 0x6000>;
+        interrupts = <2 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
new file mode 100644
index 0000000000..4e1ba03f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) PixelValve
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-pixelvalve0
+      - brcm,bcm2835-pixelvalve1
+      - brcm,bcm2835-pixelvalve2
+      - brcm,bcm2711-pixelvalve0
+      - brcm,bcm2711-pixelvalve1
+      - brcm,bcm2711-pixelvalve2
+      - brcm,bcm2711-pixelvalve3
+      - brcm,bcm2711-pixelvalve4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pixelvalve@7e807000 {
+        compatible = "brcm,bcm2835-pixelvalve2";
+        reg = <0x7e807000 0x100>;
+        interrupts = <2 10>; /* pixelvalve */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
new file mode 100644
index 0000000000..bb186197e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-txp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    txp: txp@7e004000 {
+        compatible = "brcm,bcm2835-txp";
+        reg = <0x7e004000 0x20>;
+        interrupts = <1 11>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
new file mode 100644
index 0000000000..c55a8217de
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) V3D GPU
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-v3d
+      - brcm,cygnus-v3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    v3d: v3d@7ec00000 {
+        compatible = "brcm,bcm2835-v3d";
+        reg = <0x7ec00000 0x1000>;
+        interrupts = <1 10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
new file mode 100644
index 0000000000..49a5e041aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) GPU
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+description: >
+  The VC4 device present on the Raspberry Pi includes a display system
+  with HDMI output and the HVS (Hardware Video Scaler) for compositing
+  display planes.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-vc5
+      - brcm,bcm2835-vc4
+      - brcm,cygnus-vc4
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vc4: gpu {
+        compatible = "brcm,bcm2835-vc4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
new file mode 100644
index 0000000000..5d921e3039
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) VEC
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-vec
+      - brcm,bcm2835-vec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    vec: vec@7e806000 {
+        compatible = "brcm,bcm2835-vec";
+        reg = <0x7e806000 0x1000>;
+        clocks = <&clocks BCM2835_CLOCK_VEC>;
+        interrupts = <2 27>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
new file mode 100644
index 0000000000..5bbe81862c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7511/11W/13 HDMI Encoders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The ADV7511, ADV7511W and ADV7513 are HDMI audio and video
+  transmitters compatible with HDMI 1.4 and DVI 1.0. They support color
+  space conversion, S/PDIF, CEC and HDCP. The transmitter input is
+  parallel RGB or YUV data.
+
+properties:
+  compatible:
+    enum:
+      - adi,adv7511
+      - adi,adv7511w
+      - adi,adv7513
+
+  reg:
+    description: |
+      I2C slave addresses.
+
+      The ADV7511/11W/13 internal registers are split into four pages
+      exposed through different I2C addresses, creating four register
+      maps. Each map has it own I2C address and acts as a standard slave
+      device on the I2C bus. The main address is mandatory, others are
+      optional and revert to defaults if not specified.
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    description:
+      Names of maps with programmable addresses. It can contain any map
+      needing a non-default address.
+    minItems: 1
+    items:
+      - const: main
+      - const: edid
+      - const: cec
+      - const: packet
+
+  clocks:
+    description: Reference to the CEC clock.
+    maxItems: 1
+
+  clock-names:
+    const: cec
+
+  interrupts:
+    maxItems: 1
+
+  pd-gpios:
+    description: GPIO connected to the power down signal.
+    maxItems: 1
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.8V supply that powers up the DVDD pin.
+
+  pvdd-supply:
+    description: A 1.8V supply that powers up the PVDD pin.
+
+  dvdd-3v-supply:
+    description: A 3.3V supply that powers up the DVDD_3V pin.
+
+  bgvdd-supply:
+    description: A 1.8V supply that powers up the BGVDD pin.
+
+  adi,input-depth:
+    description: Number of bits per color component at the input.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
+
+  adi,input-colorspace:
+    description: Input color space.
+    enum: [ rgb, yuv422, yuv444 ]
+
+  adi,input-clock:
+    description: |
+      Input clock type.
+        "1x": one clock cycle per pixel
+        "2x": two clock cycles per pixel
+        "dd": one clock cycle per pixel, data driven on both edges
+    enum: [ 1x, 2x, dd ]
+
+  adi,clock-delay:
+    description:
+      Video data clock delay relative to the pixel clock, in ps
+      (-1200ps .. 1600 ps).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  adi,embedded-sync:
+    description:
+      If defined, the input uses synchronization signals embedded in the
+      data stream (similar to BT.656).
+    type: boolean
+
+  adi,input-style:
+    description:
+      Input components arrangement variant as listed in the input
+      format tables in the datasheet.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3 ]
+
+  adi,input-justification:
+    description: Input bit justification.
+    enum: [ left, evenly, right ]
+
+  ports:
+    description:
+      The ADV7511(W)/13 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        description: Video port for the RGB or YUV input.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@1:
+        description: Video port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@2:
+        description: Audio port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+# adi,input-colorspace and adi,input-clock are required except in
+# "rgb 1x" and "yuv444 1x" modes, in which case they must not be
+# specified.
+if:
+  not:
+    properties:
+      adi,input-colorspace:
+        contains:
+          enum: [ rgb, yuv444 ]
+      adi,input-clock:
+        contains:
+          const: 1x
+
+then:
+  required:
+    - adi,input-style
+    - adi,input-justification
+
+else:
+  properties:
+    adi,input-style: false
+    adi,input-justification: false
+
+
+required:
+  - compatible
+  - reg
+  - ports
+  - adi,input-depth
+  - adi,input-colorspace
+  - adi,input-clock
+  - avdd-supply
+  - dvdd-supply
+  - pvdd-supply
+  - dvdd-3v-supply
+  - bgvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@e6500000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reg = <0 0xe6500000>;
+
+        adv7511w: hdmi@39 {
+            compatible = "adi,adv7511w";
+            /*
+             * The EDID page will be accessible on address 0x66 on the I2C
+             * bus. All other maps continue to use their default addresses.
+             */
+            reg = <0x39>, <0x66>;
+            reg-names = "main", "edid";
+            interrupt-parent = <&gpio3>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+            avdd-supply = <&v1v8>;
+            dvdd-supply = <&v1v8>;
+            pvdd-supply = <&v1v8>;
+            dvdd-3v-supply = <&v3v3>;
+            bgvdd-supply = <&v1v8>;
+
+            adi,input-depth = <8>;
+            adi,input-colorspace = "yuv422";
+            adi,input-clock = "1x";
+
+            adi,input-style = <3>;
+            adi,input-justification = "right";
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7511w_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    adv7511_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    codec_endpoint: endpoint {
+                        remote-endpoint = <&i2s0_cpu_endpoint>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
new file mode 100644
index 0000000000..987aa83c26
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7533/35 HDMI Encoders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The ADV7533 and ADV7535 are HDMI audio and video transmitters
+  compatible with HDMI 1.4 and DVI 1.0. They support color space
+  conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI.
+
+properties:
+  compatible:
+    enum:
+      - adi,adv7533
+      - adi,adv7535
+
+  reg:
+    description: |
+      I2C slave addresses.
+
+      The ADV7533/35 internal registers are split into four pages
+      exposed through different I2C addresses, creating four register
+      maps. Each map has it own I2C address and acts as a standard slave
+      device on the I2C bus. The main address is mandatory, others are
+      optional and revert to defaults if not specified.
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    description:
+      Names of maps with programmable addresses. It can contain any map
+      needing a non-default address.
+    minItems: 1
+    items:
+      - const: main
+      - const: edid
+      - const: cec
+      - const: packet
+
+  clocks:
+    description: Reference to the CEC clock.
+    maxItems: 1
+
+  clock-names:
+    const: cec
+
+  interrupts:
+    maxItems: 1
+
+  pd-gpios:
+    description: GPIO connected to the power down signal.
+    maxItems: 1
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.8V supply that powers up the DVDD pin.
+
+  pvdd-supply:
+    description: A 1.8V supply that powers up the PVDD pin.
+
+  a2vdd-supply:
+    description: A 1.8V supply that powers up the A2VDD pin.
+
+  v3p3-supply:
+    description: A 3.3V supply that powers up the V3P3 pin.
+
+  v1p2-supply:
+    description:
+      A supply that powers up the V1P2 pin. It can be either 1.2V
+      or 1.8V for ADV7533 but only 1.8V for ADV7535.
+
+  adi,disable-timing-generator:
+    description:
+      Disables the internal timing generator. The chip will rely on the
+      sync signals in the DSI data lanes, rather than generating its own
+      timings for HDMI output.
+    type: boolean
+
+  adi,dsi-lanes:
+    description: Number of DSI data lanes connected to the DSI host.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4 ]
+
+  ports:
+    description:
+      The ADV7533/35 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        description:
+          Video port for the DSI input. The remote endpoint phandle
+          should be a reference to a valid mipi_dsi_host_device.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@1:
+        description: Video port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@2:
+        description: Audio port for the HDMI output.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - ports
+  - adi,dsi-lanes
+  - avdd-supply
+  - dvdd-supply
+  - pvdd-supply
+  - a2vdd-supply
+  - v3p3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@e6500000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reg = <0 0xe6500000>;
+
+        adv7533: hdmi@39 {
+            compatible = "adi,adv7533";
+            /*
+             * The EDID page will be accessible on address 0x66 on the I2C
+             * bus. All other maps continue to use their default addresses.
+             */
+            reg = <0x39>, <0x66>;
+            reg-names = "main", "edid";
+            interrupt-parent = <&gpio3>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+            adi,dsi-lanes = <4>;
+            avdd-supply = <&v1v8>;
+            dvdd-supply = <&v1v8>;
+            pvdd-supply = <&v1v8>;
+            a2vdd-supply = <&v1v8>;
+            v3p3-supply = <&v3v3>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7533_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    adv7533_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    codec_endpoint: endpoint {
+                        remote-endpoint = <&i2s0_cpu_endpoint>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
new file mode 100644
index 0000000000..a1ed100465
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analogix Semiconductor, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+description: |
+  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
+  designed for portable devices.
+
+properties:
+  compatible:
+    const: analogix,anx7625
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: used for interrupt pin B8.
+    maxItems: 1
+
+  enable-gpios:
+    description: used for power on chip control, POWER_EN pin D2.
+    maxItems: 1
+
+  reset-gpios:
+    description: used for reset chip control, RESET_N pin B7.
+    maxItems: 1
+
+  vdd10-supply:
+    description: Regulator that provides the supply 1.0V power.
+
+  vdd18-supply:
+    description: Regulator that provides the supply 1.8V power.
+
+  vdd33-supply:
+    description: Regulator that provides the supply 3.3V power.
+
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [7]
+                default: 1
+
+              data-lanes: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for panel or connector.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdd10-supply
+  - vdd18-supply
+  - vdd33-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        encoder@58 {
+            compatible = "analogix,anx7625";
+            reg = <0x58>;
+            enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+            vdd10-supply = <&pp1000_mipibrdg>;
+            vdd18-supply = <&pp1800_mipibrdg>;
+            vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                mipi2dp_bridge_in: port@0 {
+                    reg = <0>;
+                    anx7625_in: endpoint {
+                        remote-endpoint = <&mipi_dsi>;
+                        bus-type = <7>;
+                        data-lanes = <0 1 2 3>;
+                    };
+                };
+
+                mipi2dp_bridge_out: port@1 {
+                    reg = <1>;
+                    anx7625_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
new file mode 100644
index 0000000000..4a5e5d9d6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7808
+      - analogix,anx7812
+      - analogix,anx7814
+      - analogix,anx7818
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the INTP interrupt.
+
+  hpd-gpios:
+    deprecated: true
+    maxItems: 1
+    description: Which GPIO to use for hpd.
+
+  pd-gpios:
+    maxItems: 1
+    description: Which GPIO to use for power down.
+
+  reset-gpios:
+    maxItems: 1
+    description: Which GPIO to use for reset.
+
+  dvdd10-supply:
+    description: Regulator for 1.0V digital core power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for HDMI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        anx7814: bridge@38 {
+            compatible = "analogix,anx7814";
+            reg = <0x38>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
+            pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    anx7814_in: endpoint {
+                        remote-endpoint = <&hdmi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    anx7814_out: endpoint {
+                        remote-endpoint = <&edp_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
new file mode 100644
index 0000000000..62f0521b09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix Display Port bridge
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  phys: true
+
+  phy-names:
+    const: dp
+
+  force-hpd:
+    type: boolean
+    description:
+      Indicate driver need force hpd when hpd detect failed, this
+      is used for some eDP screen which don not have a hpd signal.
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
new file mode 100644
index 0000000000..514f588529
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX6345 eDP Transmitter
+
+maintainers:
+  - Torsten Duwe <duwe@lst.de>
+
+description: |
+  The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+  portable devices.
+
+properties:
+  compatible:
+    const: analogix,anx6345
+
+  reg:
+    maxItems: 1
+    description: base I2C address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
+  dvdd12-supply:
+    description: Regulator for 1.2V digital core power.
+
+  dvdd25-supply:
+    description: Regulator for 2.5V digital core power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVTTL input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP output (panel or connector).
+          May be omitted if EDID works reliably.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - dvdd12-supply
+  - dvdd25-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      anx6345: anx6345@38 {
+        compatible = "analogix,anx6345";
+        reg = <0x38>;
+        reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>;
+        dvdd25-supply = <&reg_dldo2>;
+        dvdd12-supply = <&reg_fldo1>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          anx6345_in: port@0 {
+            reg = <0>;
+            anx6345_in_tcon0: endpoint {
+              remote-endpoint = <&tcon0_out_anx6345>;
+            };
+          };
+
+          anx6345_out: port@1 {
+            reg = <1>;
+            anx6345_out_panel: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
new file mode 100644
index 0000000000..23060324d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DSI bridge
+
+maintainers:
+  - Boris Brezillon <boris.brezillon@bootlin.com>
+
+description: |
+   CDNS DSI is a bridge device which converts DPI to DSI
+
+properties:
+  compatible:
+    enum:
+      - cdns,dsi
+      - ti,j721e-dsi
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Register block for controller's registers.
+      - description:
+          Register block for wrapper settings registers in case of TI J7 SoCs.
+
+  clocks:
+    items:
+      - description: PSM clock, used by the IP
+      - description: sys clock, used by the IP
+
+  clock-names:
+    items:
+      - const: dsi_p_clk
+      - const: dsi_sys_clk
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dsi_p_rst
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port representing the DSI output. It can have
+          at most 4 endpoints. The endpoint number is directly encoding
+          the DSI virtual channel used by this device.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port representing the DPI input.
+
+    required:
+      - port@1
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-dsi
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        power-domains:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+
+            panel@0 {
+                compatible = "panasonic,vvx10f034n00";
+                reg = <0>;
+                power-supply = <&vcc_lcd_reg>;
+            };
+        };
+    };
+
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy1>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dsi_panel_input>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
new file mode 100644
index 0000000000..c2b369456e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP8546 bridge
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,mhdp8546
+      - ti,j721e-mhdp8546
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+          The AUX and PMA registers are not part of this range, they are instead
+          included in the associated PHY.
+      - description:
+          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+      - description:
+          Register block of mhdptx sapb registers.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mhdptx
+      - const: j721e-intg
+      - const: mhdptx-sapb
+
+  clocks:
+    maxItems: 1
+    description:
+      DP bridge clock, used by the IP to know how to translate a number of
+      clock cycles into a time (which is used to comply with DP standard timings
+      and delays).
+
+  phys:
+    maxItems: 1
+    description:
+      phandle to the DisplayPort PHY.
+
+  phy-names:
+    items:
+      - const: dpphy
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          First input port representing the DP bridge input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Second input port representing the DP bridge input.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Third input port representing the DP bridge input.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Fourth input port representing the DP bridge input.
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port representing the DP bridge output.
+
+    required:
+      - port@0
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-mhdp8546
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 3
+        reg-names:
+          minItems: 2
+          maxItems: 3
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          maxItems: 2
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - phys
+  - phy-names
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhdp: dp-bridge@f0fb000000 {
+            compatible = "cdns,mhdp8546";
+            reg = <0xf0 0xfb000000 0x0 0x1000000>;
+            reg-names = "mhdptx";
+            clocks = <&mhdp_clock>;
+            phys = <&dp_phy>;
+            phy-names = "dpphy";
+            interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_bridge_input: endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+                    dp_bridge_output: endpoint {
+                        remote-endpoint = <&xxx_dp_connector_input>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 0000000000..5fb54375ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+  It has a flexible configuration of MIPI DSI signal input and
+  produce RGB565, RGB666, RGB888 output format.
+
+properties:
+  compatible:
+    enum:
+      - chipone,icn6211
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  clock-names:
+    const: refclk
+
+  clocks:
+    maxItems: 1
+    description: |
+        Optional external clock connected to REF_CLK input.
+        The clock rate must be in 10..154 MHz range.
+
+  enable-gpios:
+    description: Bridge EN pin, chip is reset when EN is low.
+
+  vdd1-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+  vdd2-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+  vdd3-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for MIPI DSI input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        compatible = "chipone,icn6211";
+        reg = <0>;
+        enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            bridge_in_dsi: endpoint {
+              remote-endpoint = <&dsi_out_bridge>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            bridge_out_panel: endpoint {
+              remote-endpoint = <&panel_out_bridge>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
new file mode 100644
index 0000000000..b0589fa167
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chrontel CH7033 Video Encoder
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: chrontel,ch7033
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for RGB input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          DVI port, should be connected to a node compatible with the
+          dvi-connector binding.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vga-dvi-encoder@76 {
+            compatible = "chrontel,ch7033";
+            reg = <0x76>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&lcd0_rgb_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&dvi_in>;
+                    };
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 0000000000..94543006f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+  The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the LDB's configuration
+  registers.
+
+  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+  format and can map the input to VESA or JEIDA standards.  The two channels
+  cannot be used simultaneously, that is to say, the user should pick one of
+  them to use.  Two LDB channels from two LDB instances can work together in
+  LDB split mode to support a dual link LVDS display.  The channel indexes
+  have to be different.  Channel0 outputs odd pixels and channel1 outputs
+  even pixels.
+
+  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+  input color format.  The two channels can be used simultaneously, either
+  in dual mode or split mode.  In dual mode, the two channels output identical
+  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
+  pixels.
+
+  A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+  the SoC reference manuals.  The pixel mapper uses logic of LDBs embedded in
+  i.MX6qdl/sx SoCs, i.e., it is essentially based on them.  To keep the naming
+  consistency, this binding calls it LDB.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-ldb
+      - fsl,imx8qxp-ldb
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: pixel clock
+      - description: bypass clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: bypass
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-ldb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of LDB.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The channel index.
+        enum: [ 0, 1 ]
+
+      phys:
+        description: A phandle to the phy module representing the LVDS PHY.
+        maxItems: 1
+
+      phy-names:
+        const: lvds_phy
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port of the channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port of the channel.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - phys
+      - phy-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - channel@0
+  - channel@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-ldb
+    then:
+      properties:
+        fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    ldb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx8qxp-ldb";
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+        clock-names = "pixel", "bypass";
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 0000000000..50bae21221
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+  single display controller and manipulates the two streams to support a number
+  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+  either one screen, two screens, or virtual screens.  The pixel combiner is
+  also responsible for generating some of the control signals for the pixel link
+  output channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-pixel-combiner
+      - fsl,imx8qxp-pixel-combiner
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a display stream of pixel combiner.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The display stream index.
+        enum: [ 0, 1 ]
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the display stream.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the display stream.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pixel-combiner@56020000 {
+        compatible = "fsl,imx8qxp-pixel-combiner";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x56020000 0x10000>;
+        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "apb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 0000000000..38ecc7926f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+  asynchronous linkage between pixel sources(display controller or
+  camera module) and pixel consumers(imaging or displays).
+  It consists of two distinct functions, a pixel transfer function and a
+  control interface.  Multiple pixel channels can exist per one control channel.
+  This binding documentation is only for pixel links whose pixel sources are
+  display controllers.
+
+  The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+  firmware.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-dc-pixel-link
+      - fsl,imx8qxp-dc-pixel-link
+
+  fsl,dc-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller index that the pixel link
+      connects to.
+
+  fsl,dc-stream-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller stream index that the pixel
+      link connects to.
+    enum: [0, 1]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link input port node from upstream video source.
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          enum: [0, 1]
+
+required:
+  - compatible
+  - fsl,dc-id
+  - fsl,dc-stream-id
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc0-pixel-link0 {
+        compatible = "fsl,imx8qxp-dc-pixel-link";
+        fsl,dc-id = /bits/ 8 <0>;
+        fsl,dc-stream-id = /bits/ 8 <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* from dc0 pixel combiner channel0 */
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+                };
+            };
+
+            /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+                };
+
+                dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+                };
+            };
+
+            /* unused */
+            port@2 {
+                reg = <2>;
+            };
+
+            /* unused */
+            port@3 {
+                reg = <3>;
+            };
+
+            /* to imaging subsystem */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 0000000000..e4e77fad05
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  fsl,sc-resource:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SCU resource ID associated with this PXL2DPI instance.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - fsl,sc-resource
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 0000000000..07388bf2b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The i.MX8MP mediamix contains two registers which are responsible
+  for configuring the on-SoC DPI-to-LVDS serializer. This describes
+  those registers as bridge within the DT.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-ldb
+      - fsl,imx8mp-ldb
+      - fsl,imx93-ldb
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ldb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ldb
+      - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-ldb
+              - fsl,imx93-ldb
+    then:
+      properties:
+        ports:
+          properties:
+            port@2: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    blk-ctrl {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
new file mode 100644
index 0000000000..a44d025d33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+  ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
+  DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip
+  which is connected to and operated by the ChromeOS Embedded Controller
+  (See google,cros-ec.yaml). It is accessed using I2C tunneling through
+  the EC and therefore its node should be a child of an EC I2C tunnel node
+  (See google,cros-ec-i2c-tunnel.yaml).
+
+properties:
+  compatible:
+    const: google,cros-ec-anx7688
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for HDMI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: USB Type-c connector.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c_tunnel_b: i2c-tunnel1 {
+        compatible = "google,cros-ec-i2c-tunnel";
+        google,remote-bus = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        anx7688: anx7688@2c {
+            compatible = "google,cros-ec-anx7688";
+            reg = <0x2c>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    anx7688_in: endpoint {
+                        remote-endpoint = <&hdmi0_out>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    anx7688_out: endpoint {
+                        remote-endpoint = <&typec_connector>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 0000000000..0b27df429b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
new file mode 100644
index 0000000000..958a073f4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay mipi dsi controller
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-dsi
+
+  reg:
+    items:
+      - description: MIPI registers range
+
+  reg-names:
+    items:
+      - const: mipi
+
+  clocks:
+    items:
+      - description: MIPI DSI clock
+      - description: MIPI DSI econfig clock
+      - description: MIPI DSI config clock
+
+  clock-names:
+    items:
+      - const: clk_mipi
+      - const: clk_mipi_ecfg
+      - const: clk_mipi_cfg
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI DSI input port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mipi-dsi@20900000 {
+        compatible = "intel,keembay-dsi";
+        reg = <0x20900000 0x4000>;
+        reg-names = "mipi";
+        clocks = <&scmi_clk 0x86>,
+                 <&scmi_clk 0x88>,
+                 <&scmi_clk 0x89>;
+        clock-names = "clk_mipi", "clk_mipi_ecfg",
+                      "clk_mipi_cfg";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&disp_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&adv7535_input>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
new file mode 100644
index 0000000000..c9a882ee6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it6505
+
+maintainers:
+  - Allen Chen <allen.chen@ite.com.tw>
+
+description: |
+  The IT6505 is a high-performance DisplayPort 1.1a transmitter,
+  fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
+  The IT6505 supports color depth of up to 36 bits (12 bits/color)
+  and ensures robust transmission of high-quality uncompressed video
+  content, along with uncompressed and compressed digital audio content.
+
+  Aside from the various video output formats supported, the IT6505
+  also encodes and transmits up to 8 channels of I2S digital audio,
+  with sampling rate up to 192kHz and sample size up to 24 bits.
+  In addition, an S/PDIF input port takes in compressed audio of up to
+  192kHz frame rate.
+
+  Each IT6505 chip comes preprogrammed with an unique HDCP key,
+  in compliance with the HDCP 1.3 standard so as to provide secure
+  transmission of high-definition content. Users of the IT6505 need not
+  purchase any HDCP keys or ROMs.
+
+properties:
+  compatible:
+    const: ite,it6505
+
+  reg:
+    maxItems: 1
+
+  ovdd-supply:
+    description: I/O voltage
+
+  pwr18-supply:
+    description: core voltage
+
+  interrupts:
+    maxItems: 1
+    description: interrupt specifier of INT pin
+
+  reset-gpios:
+    maxItems: 1
+    description: gpio specifier of RESET pin
+
+  extcon:
+    maxItems: 1
+    description: extcon specifier for the Power Delivery
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: A port node pointing to DPI host port node
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              link-frequencies:
+                minItems: 1
+                maxItems: 1
+                description: Allowed max link frequencies in Hz
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for DP output
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                uniqueItems: true
+                items:
+                  - enum: [ 0, 1 ]
+                  - const: 1
+                  - const: 2
+                  - const: 3
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ovdd-supply
+  - pwr18-supply
+  - interrupts
+  - reset-gpios
+  - extcon
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dp-bridge@5c {
+            compatible = "ite,it6505";
+            interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>;
+            reg = <0x5c>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&it6505_pins>;
+            ovdd-supply = <&mt6358_vsim1_reg>;
+            pwr18-supply = <&it6505_pp18_reg>;
+            reset-gpios = <&pio 179 1>;
+            extcon = <&usbc_extcon>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it6505_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                        link-frequencies = /bits/ 64 <150000000>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    it6505_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                        data-lanes = <0 1>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
new file mode 100644
index 0000000000..a7eb260369
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it66121 HDMI bridge
+
+maintainers:
+  - Phong LE <ple@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The IT66121 is a high-performance and low-power single channel HDMI
+  transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible
+  to DVI 1.0 specifications.
+
+properties:
+  compatible:
+    enum:
+      - ite,it66121
+      - ite,it6610
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
+  vrf12-supply:
+    description: Regulator for 1.2V analog core power.
+
+  vcn33-supply:
+    description: Regulator for 3.3V digital core power.
+
+  vcn18-supply:
+    description: Regulator for 1.8V IO core power.
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DPI input port.
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                description:
+                  Endpoint bus width.
+                enum:
+                  - 12  # 12 data lines connected and dual-edge mode
+                  - 24  # 24 data lines connected and single-edge mode
+                default: 24
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI Connector port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vrf12-supply
+  - vcn33-supply
+  - vcn18-supply
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        it66121hdmitx: hdmitx@4c {
+            compatible = "ite,it66121";
+            pinctrl-names = "default";
+            pinctrl-0 = <&ite_pins_default>;
+            vcn33-supply = <&mt6358_vcn33_wifi_reg>;
+            vcn18-supply = <&mt6358_vcn18_reg>;
+            vrf12-supply = <&mt6358_vrf12_reg>;
+            reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&pio>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            reg = <0x4c>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it66121_in: endpoint {
+                        bus-width = <12>;
+                        remote-endpoint = <&display_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    hdmi_conn_out: endpoint {
+                        remote-endpoint = <&hdmi_conn_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
new file mode 100644
index 0000000000..f201ae4af4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8912B MIPI to HDMI Bridge
+
+maintainers:
+  - Adrien Grassein <adrien.grassein@gmail.com>
+
+description: |
+  The LT8912B is a bridge device which convert DSI to HDMI
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt8912b
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Primary MIPI port for MIPI input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          HDMI port, should be connected to a node compatible with the
+          hdmi-connector binding.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@48 {
+        compatible = "lontium,lt8912b";
+        reg = <0x48>;
+        reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi_out_in: endpoint {
+              data-lanes = <0 1 2 3>;
+              remote-endpoint = <&mipi_dsi_out>;
+            };
+          };
+
+          port@1 {
+              reg = <1>;
+
+              endpoint {
+                  remote-endpoint = <&hdmi_in>;
+              };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 0000000000..9a6e9b25d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9211
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vccio-supply:
+    description: Regulator for 1.8V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI input or
+          LVDS port-1 for LVDS input or DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input or LVDS port-2
+          for LVDS input. Used in combination with primary
+          port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI output or
+          LVDS port-1 for LVDS output or DPI output.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI output or LVDS port-2
+          for LVDS output. Used in combination with primary
+          port-1 to drive higher resolution displays.
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9211";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&lt9211_1v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
new file mode 100644
index 0000000000..5b9d36f7af
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9611
+      - lontium,lt9611uxc
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vdd-supply:
+    description: Regulator for 1.8V MIPI phy power.
+
+  vcc-supply:
+    description: Regulator for 3.3V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI port-1 for MIPI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input, used in combination
+          with primary MIPI port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          HDMI port for HDMI output
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c10 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9611";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vdd-supply = <&lt9611_1v8>;
+        vcc-supply = <&lt9611_3v3>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            lt9611_a: endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            lt9611_b: endpoint {
+              remote-endpoint = <&dsi1_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            lt9611_out: endpoint {
+              remote-endpoint = <&hdmi_con>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
new file mode 100644
index 0000000000..84aafcbf09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Transparent LVDS encoders and decoders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding supports transparent LVDS encoders and decoders that don't
+  require any configuration.
+
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS panels. This binding targets devices compatible with the following
+  specifications only.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Those devices have been marketed under the FPD-Link and FlatLink brand names
+  among others.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
+              - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
+              - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+          - const: lvds-encoder # Generic LVDS encoder compatible fallback
+      - items:
+          - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
+              - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+          - const: lvds-decoder # Generic LVDS decoders compatible fallback
+      - enum:
+          - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          For LVDS encoders, port 0 is the parallel input
+          For LVDS decoders, port 0 is the LVDS input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-mapping:
+                enum:
+                  - jeida-18
+                  - jeida-24
+                  - vesa-24
+                description: |
+                  The color signals mapping order. See details in
+                  Documentation/devicetree/bindings/display/lvds.yaml
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          For LVDS encoders, port 1 is the LVDS output
+          For LVDS decoders, port 1 is the parallel output
+
+    required:
+      - port@0
+      - port@1
+
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
+  powerdown-gpios:
+    description:
+      The GPIO used to control the power down line of this device.
+    maxItems: 1
+
+  power-supply: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              properties:
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+
+examples:
+  - |
+    lvds-encoder {
+      compatible = "ti,ds90c185", "lvds-encoder";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          lvds_enc_in: endpoint {
+            remote-endpoint = <&display_out_rgb>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          lvds_enc_out: endpoint {
+            remote-endpoint = <&lvds_panel_in>;
+          };
+        };
+      };
+    };
+
+  - |
+    lvds-decoder {
+      compatible = "ti,ds90cf384a", "lvds-decoder";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          lvds_dec_in: endpoint {
+            remote-endpoint = <&display_out_lvds>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          lvds_dec_out: endpoint {
+            remote-endpoint = <&rgb_panel_in>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
new file mode 100644
index 0000000000..09e0a21f70
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -0,0 +1,91 @@
+Drivers for the second video output of the GE B850v3:
+   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+   STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+The video processing pipeline on the second output on the GE B850v3:
+
+   Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+Each bridge has a dedicated flash containing firmware for supporting the custom
+design. The result is that, in this design, neither the STDP4028 nor the
+STDP2690 behave as the stock bridges would. The compatible strings include the
+suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+the firmware specific for the GE B850v3.
+
+The hardware do not provide control over the video processing pipeline, as the
+two bridges behaves as a single one. The only interfaces exposed by the
+hardware are EDID, HPD, and interrupts.
+
+stdp4028-ge-b850v3-fw required properties:
+  - compatible : "megachips,stdp4028-ge-b850v3-fw"
+  - reg : I2C bus address
+  - interrupts : one interrupt should be described here, as in
+    <0 IRQ_TYPE_LEVEL_HIGH>
+  - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+stdp2690-ge-b850v3-fw required properties:
+    compatible : "megachips,stdp2690-ge-b850v3-fw"
+  - reg : I2C bus address
+  - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+Example:
+
+&mux2_i2c2 {
+	clock-frequency = <100000>;
+
+	stdp4028@73 {
+		compatible = "megachips,stdp4028-ge-b850v3-fw";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x73>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				stdp4028_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				stdp4028_out: endpoint {
+					remote-endpoint = <&stdp2690_in>;
+				};
+			};
+		};
+	};
+
+	stdp2690@72 {
+		compatible = "megachips,stdp2690-ge-b850v3-fw";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x72>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				stdp2690_in: endpoint {
+					remote-endpoint = <&stdp4028_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				stdp2690_out: endpoint {
+					/* Connector for external display */
+				};
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 0000000000..350fb8f400
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+  - Guido Gúnther <agx@sigxcpu.org>
+  - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+  NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+  the SOCs NWL MIPI-DSI host controller.
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx8mq-nwl-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: DSI core clock
+      - description: RX_ESC clock (used in escape mode)
+      - description: TX_ESC clock (used in escape mode)
+      - description: PHY_REF clock
+      - description: LCDIF clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: rx_esc
+      - const: tx_esc
+      - const: phy_ref
+      - const: lcdif
+
+  mux-controls:
+    description:
+      mux controller node to use for operating the input mux
+
+  phys:
+    maxItems: 1
+    description:
+      A phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: dsi byte reset line
+      - description: dsi dpi reset line
+      - description: dsi esc reset line
+      - description: dsi pclk reset line
+
+  reset-names:
+    items:
+      - const: byte
+      - const: dpi
+      - const: esc
+      - const: pclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: sub-node describing the input from LCDIF
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: sub-node describing the input from DCSS
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - mux-controls
+  - phy-names
+  - phys
+  - ports
+  - reg
+  - reset-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    dsi@30a00000 {
+              #address-cells = <1>;
+              #size-cells = <0>;
+              compatible = "fsl,imx8mq-nwl-dsi";
+              reg = <0x30A00000 0x300>;
+              clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+                       <&clk IMX8MQ_CLK_DSI_AHB>,
+                       <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+                       <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+                       <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+              clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+              interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+              mux-controls = <&mux 0>;
+              power-domains = <&pgc_mipi>;
+              resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+                       <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+              reset-names = "byte", "dpi", "esc", "pclk";
+              phys = <&dphy>;
+              phy-names = "dphy";
+
+              panel@0 {
+                      compatible = "rocktech,jh057n00900";
+                      reg = <0>;
+                      vcc-supply = <&reg_2v8_p>;
+                      iovcc-supply = <&reg_1v8_p>;
+                      reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+                      port {
+                           panel_in: endpoint {
+                                     remote-endpoint = <&mipi_dsi_out>;
+                           };
+                      };
+              };
+
+              ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                           #size-cells = <0>;
+                           #address-cells = <1>;
+                           reg = <0>;
+                           mipi_dsi_in: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&lcdif_mipi_dsi>;
+                           };
+                    };
+                    port@1 {
+                           reg = <1>;
+                           mipi_dsi_out: endpoint {
+                                         remote-endpoint = <&panel_in>;
+                           };
+                    };
+              };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 0000000000..70ec70922c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 0000000000..21d995f29a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    const: nxp,tda998x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  video-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x230145
+    maximum: 0xffffff
+    description:
+      24 bits value which defines how the video controller output is wired to
+      the TDA998x input.
+
+  audio-ports:
+    description:
+      Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+      The implementation allows one or two DAIs.
+      If two DAIs are defined, they must be of different type.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 1
+      items:
+        - description: |
+            The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+            (see include/dt-bindings/display/tda998x.h).
+        - description:
+            The second value defines the tda998x AP_ENA reg content when the
+            DAI in question is used.
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+
+  nxp,calib-gpios:
+    maxItems: 1
+    description:
+      Calibration GPIO, which must correspond with the gpio used for the
+      TDA998x interrupt pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Parallel input port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        type: object
+        description: Parallel input port
+
+      port@1:
+        type: object
+        description: HDMI output port
+
+required:
+  - compatible
+  - reg
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/tda998x.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda998x: hdmi-encoder@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            video-ports = <0x230145>;
+
+            #sound-dai-cells = <1>;
+                         /* DAI-format / AP_ENA reg value */
+            audio-ports = <TDA998x_SPDIF 0x04>,
+                          <TDA998x_I2S 0x03>;
+
+            port {
+                tda998x_in: endpoint {
+                    remote-endpoint = <&lcdc_0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
new file mode 100644
index 0000000000..e6397ac204
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - parade,ps8622
+      - parade,ps8625
+
+  reg:
+    maxItems: 1
+
+  lane-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    description: Number of DP lanes to use.
+
+  use-external-pwm:
+    type: boolean
+    description: Backlight will be controlled by an external PWM.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to RST_ pin.
+
+  sleep-gpios:
+    maxItems: 1
+    description: GPIO connected to PD_ pin.
+
+  vdd12-supply: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DisplayPort input.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - sleep-gpios
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: parade,ps8622
+    then:
+      properties:
+        lane-count:
+          const: 1
+    else:
+      properties:
+        lane-count:
+          const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds-bridge@48 {
+            compatible = "parade,ps8625";
+            reg = <0x48>;
+            sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+            lane-count = <2>;
+            use-external-pwm;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dp_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
new file mode 100644
index 0000000000..5856450c5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DSI to eDP Video Format Converter
+
+maintainers:
+  - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+  The PS8640 is a low power MIPI-to-eDP video format converter supporting
+  mobile devices with embedded panel resolutions up to 2048 x 1536. The
+  device accepts a single channel of MIPI DSI v1.1, with up to four lanes
+  plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
+  device outputs eDP v1.4, one or two lanes, at a link rate of up to
+  3.24Gbit/sec per lane.
+
+properties:
+  compatible:
+    const: parade,ps8640
+
+  reg:
+    maxItems: 1
+    description: Base I2C address of the device.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: GPIO connected to active low powerdown.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset.
+
+  vdd12-supply:
+    description: Regulator for 1.2V digital core power.
+
+  vdd33-supply:
+    description: Regulator for 3.3V digital core power.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP output (panel or connector).
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - reset-gpios
+  - vdd12-supply
+  - vdd33-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ps8640: edp-bridge@18 {
+            compatible = "parade,ps8640";
+            reg = <0x18>;
+            powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+            vdd12-supply = <&ps8640_fixed_1v2>;
+            vdd33-supply = <&mt6397_vgp2_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ps8640_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    ps8640_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+
+            aux-bus {
+                panel {
+                    compatible = "boe,nv133fhm-n62";
+                    power-supply = <&pp3300_dx_edp>;
+                    backlight = <&backlight>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&ps8640_out>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 0000000000..d33026f85e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+      - renesas,r8a779g0-dsi-csi2-tx    # for V4H
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi0: dsi-encoder@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 0000000000..e08c246339
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This binding describes the MIPI DSI encoder embedded in the Renesas
+  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+  up to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+          - renesas,r9a07g054-mipi-dsi # RZ/V2L
+      - const: renesas,rzg2l-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Sequence operation channel 0 interrupt
+      - description: Sequence operation channel 1 interrupt
+      - description: Video-Input operation channel 1 interrupt
+      - description: DSI Packet Receive interrupt
+      - description: DSI Fatal Error interrupt
+      - description: DSI D-PHY PPI interrupt
+      - description: Debug interrupt
+
+  interrupt-names:
+    items:
+      - const: seq0
+      - const: seq1
+      - const: vin1
+      - const: rcv
+      - const: ferr
+      - const: ppi
+      - const: debug
+
+  clocks:
+    items:
+      - description: DSI D-PHY PLL multiplied clock
+      - description: DSI D-PHY system clock
+      - description: DSI AXI bus clock
+      - description: DSI Register access clock
+      - description: DSI Video clock
+      - description: DSI D-PHY Escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: pllclk
+      - const: sysclk
+      - const: aclk
+      - const: pclk
+      - const: vclk
+      - const: lpclk
+
+  resets:
+    items:
+      - description: MIPI_DSI_CMN_RSTB
+      - description: MIPI_DSI_ARESET_N
+      - description: MIPI_DSI_PRESET_N
+
+  reset-names:
+    items:
+      - const: rst
+      - const: arst
+      - const: prst
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi0: dsi@10850000 {
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10850000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&adv7535_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
new file mode 100644
index 0000000000..e3ec697f89
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car DWC HDMI TX Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX
+          - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX
+          - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX
+          - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX
+          - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX
+          - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX
+          - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX
+      - const: renesas,rcar-gen3-hdmi
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - interrupts
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    hdmi@fead0000 {
+        compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+        reg = <0xfead0000 0x10000>;
+        interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
+        clock-names = "iahb", "isfr";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dw_hdmi0_in: endpoint {
+                    remote-endpoint = <&du_out_hdmi0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                rcar_dw_hdmi0_out: endpoint {
+                    remote-endpoint = <&hdmi0_con>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                rcar_dw_hdmi0_sound_in: endpoint {
+                    remote-endpoint = <&hdmi_sound_out>;
+                };
+            };
+        };
+    };
+
+    hdmi0-out {
+        compatible = "hdmi-connector";
+        label = "HDMI0 OUT";
+        type = "a";
+
+        port {
+            hdmi0_con: endpoint {
+                remote-endpoint = <&rcar_dw_hdmi0_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
new file mode 100644
index 0000000000..bb9dbfb9be
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -0,0 +1,235 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car LVDS Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+  Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders
+      - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders
+      - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders
+      - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders
+      - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders
+      - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders
+      - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders
+      - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders
+      - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders
+      - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
+      - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
+      - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
+      - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
+      - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
+      - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
+      - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders
+      - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LVDS output port
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  renesas,companion:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the companion LVDS encoder. This property is mandatory
+      for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall
+      point to the second encoder to be used as a companion in dual-link mode.
+      It shall not be set for any other LVDS encoder.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+if:
+  properties:
+    compatible:
+      enum:
+        - renesas,r8a774c0-lvds
+        - renesas,r8a77990-lvds
+        - renesas,r8a77995-lvds
+then:
+  properties:
+    clocks:
+      minItems: 1
+      items:
+        - description: Functional clock
+        - description: EXTAL input clock
+        - description: DU_DOTCLKIN0 input clock
+        - description: DU_DOTCLKIN1 input clock
+
+    clock-names:
+      minItems: 1
+      items:
+        - const: fck
+        # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
+        # These clocks are optional.
+        - enum:
+            - extal
+            - dclkin.0
+            - dclkin.1
+        - enum:
+            - extal
+            - dclkin.0
+            - dclkin.1
+        - enum:
+            - extal
+            - dclkin.0
+            - dclkin.1
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: Functional clock
+
+    clock-names:
+      items:
+        - const: fck
+
+    renesas,companion: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    lvds@feb90000 {
+        compatible = "renesas,r8a7795-lvds";
+        reg = <0xfeb90000 0x14>;
+        clocks = <&cpg CPG_MOD 727>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 727>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds_in: endpoint {
+                    remote-endpoint = <&du_out_lvds0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                lvds_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77990-sysc.h>
+
+    lvds0: lvds@feb90000 {
+        compatible = "renesas,r8a77990-lvds";
+        reg = <0xfeb90000 0x20>;
+        clocks = <&cpg CPG_MOD 727>,
+                 <&x13_clk>,
+                 <&extal_clk>;
+        clock-names = "fck", "dclkin.0", "extal";
+        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+        resets = <&cpg 727>;
+
+        renesas,companion = <&lvds1>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds0_in: endpoint {
+                    remote-endpoint = <&du_out_lvds0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                lvds0_out: endpoint {
+                    remote-endpoint = <&panel_in1>;
+                };
+            };
+        };
+    };
+
+    lvds1: lvds@feb90100 {
+        compatible = "renesas,r8a77990-lvds";
+        reg = <0xfeb90100 0x20>;
+        clocks = <&cpg CPG_MOD 727>,
+                 <&x13_clk>,
+                 <&extal_clk>;
+        clock-names = "fck", "dclkin.0", "extal";
+        power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+        resets = <&cpg 726>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds1_in: endpoint {
+                    remote-endpoint = <&du_out_lvds1>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                lvds1_out: endpoint {
+                    remote-endpoint = <&panel_in2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
new file mode 100644
index 0000000000..4ed7a799ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung MIPI DSIM bridge controller
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |
+  Samsung MIPI DSIM bridge controller can be found it on Exynos
+  and i.MX8M Mini/Nano/Plus SoC's.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-mipi-dsi
+          - samsung,exynos4210-mipi-dsi
+          - samsung,exynos5410-mipi-dsi
+          - samsung,exynos5422-mipi-dsi
+          - samsung,exynos5433-mipi-dsi
+          - fsl,imx8mm-mipi-dsim
+          - fsl,imx8mp-mipi-dsim
+      - items:
+          - const: fsl,imx8mn-mipi-dsim
+          - const: fsl,imx8mm-mipi-dsim
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+
+  samsung,phy-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: phandle to the samsung phy-type
+
+  power-domains:
+    maxItems: 1
+
+  samsung,power-domain:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the associated samsung power domain
+
+  vddcore-supply:
+    description: MIPI DSIM Core voltage supply (e.g. 1.1V)
+
+  vddio-supply:
+    description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+
+  samsung,burst-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM high speed burst mode frequency.  If absent,
+      the pixel clock from the attached device or bridge
+      will be used instead.
+
+  samsung,esc-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM escape mode frequency.
+
+  samsung,pll-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM oscillator clock frequency. If absent, the clock frequency
+      of sclk_mipi will be used instead.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dsim
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                uniqueItems: true
+                items:
+                  enum: [ 1, 2, 3, 4 ]
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+                description:
+                  The Samsung MIPI DSI IP requires that all the data lanes have
+                  the same polarity.
+
+            dependencies:
+              lane-polarities: [data-lanes]
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - samsung,esc-clock-frequency
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: phyclk_mipidphy0_bitclkdiv8
+            - const: phyclk_mipidphy0_rxclkesc0
+            - const: sclk_rgb_vclk_to_dsim0
+            - const: sclk_mipi
+
+        ports:
+          required:
+            - port@0
+
+      required:
+        - ports
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5410-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: sclk_mipi
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+        - samsung,phy-type
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi@13900000 {
+       compatible = "samsung,exynos5433-mipi-dsi";
+       reg = <0x13900000 0xC0>;
+       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+       phys = <&mipi_phy 1>;
+       phy-names = "dsim";
+       clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+                <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+                <&cmu_disp CLK_SCLK_DSIM0>;
+       clock-names = "bus_clk",
+                     "phyclk_mipidphy0_bitclkdiv8",
+                     "phyclk_mipidphy0_rxclkesc0",
+                     "sclk_rgb_vclk_to_dsim0",
+                     "sclk_mipi";
+       power-domains = <&pd_disp>;
+       vddcore-supply = <&ldo6_reg>;
+       vddio-supply = <&ldo7_reg>;
+       samsung,burst-clock-frequency = <512000000>;
+       samsung,esc-clock-frequency = <16000000>;
+       samsung,pll-clock-frequency = <24000000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&te_irq>;
+
+       ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+             reg = <0>;
+
+             dsi_to_mic: endpoint {
+                remote-endpoint = <&mic_to_dsi>;
+             };
+          };
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
new file mode 100644
index 0000000000..6d1a36b76f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI8620 HDMI/MHL bridge
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: sil,sii8620
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  cvcc10-supply:
+    description: Digital Core Supply Voltage (1.0V)
+
+  interrupts:
+    maxItems: 1
+
+  iovcc18-supply:
+    description: I/O Supply Voltage (1.8V)
+
+  reset-gpios:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    unevaluatedProperties: false
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - cvcc10-supply
+  - interrupts
+  - iovcc18-supply
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@39 {
+            reg = <0x39>;
+            compatible = "sil,sii8620";
+            cvcc10-supply = <&ldo36_reg>;
+            iovcc18-supply = <&ldo34_reg>;
+            interrupt-parent = <&gpf0>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+            clocks = <&pmu_system_controller 0>;
+            clock-names = "xtal";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mhl_to_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_to_mhl>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mhl_to_musb_con: endpoint {
+                        remote-endpoint = <&musb_con_to_mhl>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
new file mode 100644
index 0000000000..5a69547ad3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image sii902x HDMI bridge
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sil,sii9022-cpi # CEC Programming Interface
+              - sil,sii9022-tpi # Transmitter Programming Interface
+          - const: sil,sii9022
+      - const: sil,sii9022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line used to inform the host about hotplug events.
+
+  reset-gpios:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O Supply Voltage (1.8V or 3.3V)
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage (1.2V)
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+    description: |
+      <0> if only I2S or S/PDIF pin is wired,
+      <1> if both are wired.
+      HDMI audio is configured only if this property is found.
+      If HDMI audio is configured, the sii902x device becomes an I2S and/or
+      S/PDIF audio codec component (e.g. a digital audio sink), that can be
+      used in configuring full audio devices with simple-card or
+      audio-graph-card bindings. See their binding documents on how to describe
+      the way the
+      sii902x device is connected to the rest of the audio system:
+      Documentation/devicetree/bindings/sound/simple-card.yaml
+      Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+      Note: In case of the audio-graph-card binding the used port index should
+      be 3.
+
+  sil,i2s-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    description:
+      Each integer indicates which I2S pin is connected to which audio FIFO.
+      The first integer selects the I2S audio pin for the first audio FIFO#0
+      (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
+      on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
+      connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
+      mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
+      default value is <0>, describing SD0 pin being routed to HDMI audio
+      FIFO#0.
+
+  clocks:
+    maxItems: 1
+    description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
+
+  clock-names:
+    const: mclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-bridge@39 {
+            compatible = "sil,sii9022";
+            reg = <0x39>;
+            reset-gpios = <&pioA 1 0>;
+            iovcc-supply = <&v3v3_hdmi>;
+            cvcc12-supply = <&v1v2_hdmi>;
+
+            #sound-dai-cells = <0>;
+            sil,i2s-data-lanes = < 0 1 2 >;
+            clocks = <&mclk>;
+            clock-names = "mclk";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dc_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 0000000000..176181d255
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+  - Maciej Purski <m.purski@samsung.com>
+
+properties:
+  compatible:
+    const: sil,sii9234
+
+  reg:
+    description: I2C address for TPI interface
+    maxItems: 1
+
+  avcc12-supply:
+    description: TMDS Analog Supply Voltage, 1.2V
+
+  avcc33-supply:
+    description: MHL/USB Switch Supply Voltage, 3.3V
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage, 1.2V
+
+  iovcc18-supply:
+    description: I/O voltage supply, 1.8V
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the reset pin.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - avcc12-supply
+  - avcc33-supply
+  - cvcc12-supply
+  - iovcc18-supply
+  - interrupts
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@39 {
+        compatible = "sil,sii9234";
+        reg = <0x39>;
+        avcc12-supply = <&vsil12>;
+        avcc33-supply = <&vcc33mhl>;
+        cvcc12-supply = <&vsil12>;
+        iovcc18-supply = <&vcc18mhl>;
+        interrupt-parent = <&gpf3>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            mhl_to_hdmi: endpoint {
+              remote-endpoint = <&hdmi_to_mhl>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            mhl_to_connector: endpoint {
+              remote-endpoint = <&connector_to_mhl>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
new file mode 100644
index 0000000000..43cf4df981
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Transparent non-programmable DRM bridges
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  This binding supports transparent non-programmable bridges that don't require
+  any configuration, with a single input and a single output.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,ths8134a
+              - ti,ths8134b
+          - const: ti,ths8134
+      - items:
+          - const: corpro,gm7123
+          - const: adi,adv7123
+      - enum:
+          - adi,adv7123
+          - dumb-vga-dac
+          - ti,opa362
+          - ti,ths8134
+          - ti,ths8135
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The bridge input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The bridge output
+
+    required:
+      - port@0
+      - port@1
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO controlling bridge enable
+
+  vdd-supply:
+    description: Power supply for the bridge
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    bridge {
+        compatible = "ti,ths8134a", "ti,ths8134";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                vga_bridge_in: endpoint {
+                    remote-endpoint = <&tcon0_out_vga>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                vga_bridge_out: endpoint {
+                    remote-endpoint = <&vga_con_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
new file mode 100644
index 0000000000..8747b95ec2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MIPI DSI host controller
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+  This document defines device tree properties for the Synopsys DesignWare MIPI
+  DSI host controller. It doesn't constitute a device tree binding specification
+  by itself but is meant to be referenced by platform-specific device tree
+  bindings.
+
+  When referenced from platform device tree bindings the properties defined in
+  this document are defined as follows. The platform device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: apb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - clock-names
+  - clocks
+  - ports
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
new file mode 100644
index 0000000000..4b7e54a8f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Synopsys DesignWare HDMI TX Controller
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This document defines device tree properties for the Synopsys DesignWare HDMI
+  TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree
+  binding specification by itself but is meant to be referenced by device tree
+  bindings for the platform-specific integrations of the DWC HDMI TX.
+
+  When referenced from platform device tree bindings the properties defined in
+  this document are defined as follows. The platform device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+properties:
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    description:
+      Width (in bytes) of the registers specified by the reg property.
+    enum: [1, 4]
+    default: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+    items:
+      - description: The bus clock for either AHB and APB
+      - description: The internal register configuration clock
+    additionalItems: true
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      - const: iahb
+      - const: isfr
+    additionalItems: true
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
new file mode 100644
index 0000000000..8ae382429d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thine Electronics THC63LVD1024 LVDS Decoder
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
+  streams to parallel data outputs. The chip supports single/dual input/output
+  modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
+  outputs.
+
+  Single or dual operation mode, output data mapping and DDR output modes are
+  configured through input signals and the chip does not expose any control
+  bus.
+
+properties:
+  compatible:
+    const: thine,thc63lvd1024
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The device can operate in single or dual input and output modes.
+
+      When operating in single input mode, all pixels are received on port@0,
+      and port@1 shall not contain any endpoint. In dual input mode,
+      even-numbered pixels are received on port@0 and odd-numbered pixels on
+      port@1, and both port@0 and port@1 shall contain endpoints.
+
+      When operating in single output mode all pixels are output from the first
+      CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
+      mode pixels are output from both CMOS/TTL ports and both port@2 and
+      port@3 shall contain endpoints.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First LVDS input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second LVDS input port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First digital CMOS/TTL parallel output
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second digital CMOS/TTL parallel output
+
+    required:
+      - port@0
+      - port@2
+
+  oe-gpios:
+    maxItems: 1
+    description: Output enable GPIO signal, pin name "OE", active high.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Power down GPIO signal, pin name "/PDWN", active low.
+
+  vcc-supply:
+    description:
+      Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
+      digital circuitry.
+
+required:
+  - compatible
+  - ports
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    lvds-decoder {
+        compatible = "thine,thc63lvd1024";
+
+        vcc-supply = <&reg_lvds_vcc>;
+        powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                lvds_dec_in_0: endpoint {
+                    remote-endpoint = <&lvds_out>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+
+                lvds_dec_out_2: endpoint {
+                    remote-endpoint = <&adv7511_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
new file mode 100644
index 0000000000..d3f84d2207
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DLPC3433 MIPI DSI to DMD bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Christopher Vollo <chris@renewoutreach.org>
+
+description: |
+  TI DLPC3433 is a MIPI DSI based display controller bridge
+  for processing high resolution DMD based projectors.
+
+  It has a flexible configuration of MIPI DSI and DPI signal
+  input that produces a DMD output in RGB565, RGB666, RGB888
+  formats.
+
+  It supports upto 720p resolution with 60 and 120 Hz refresh
+  rates.
+
+properties:
+  compatible:
+    const: ti,dlpc3433
+
+  reg:
+    enum:
+      - 0x1b
+      - 0x1d
+
+  enable-gpios:
+    description: PROJ_ON pin, chip powers up PROJ_ON is high.
+
+  vcc_intf-supply:
+    description: A 1.8V/3.3V supply that power the Host I/O.
+
+  vcc_flsh-supply:
+    description: A 1.8V/3.3V supply that power the Flash I/O.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DMD output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@1b {
+            compatible = "ti,dlpc3433";
+            reg = <0x1b>;
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_in_dsi: endpoint {
+                        remote-endpoint = <&dsi_out_bridge>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_out_panel: endpoint {
+                        remote-endpoint = <&panel_out_bridge>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
new file mode 100644
index 0000000000..48a97bb3e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  Texas Instruments SN65DSI83 1x Single-link MIPI DSI
+  to 1x Single-link LVDS
+  https://www.ti.com/lit/gpn/sn65dsi83
+  Texas Instruments SN65DSI84 1x Single-link MIPI DSI
+  to 1x Dual-link or 2x Single-link LVDS
+  https://www.ti.com/lit/gpn/sn65dsi84
+
+properties:
+  compatible:
+    enum:
+      - ti,sn65dsi83
+      - ti,sn65dsi84
+
+  reg:
+    enum:
+      - 0x2c
+      - 0x2d
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for bridge_en pin (active high).
+
+  vcc-supply:
+    description: A 1.8V power supply (see regulator/regulator.yaml).
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI Channel-A input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI Channel-B input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,sn65dsi83
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+            port@3: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,sn65dsi84
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@2d {
+            compatible = "ti,sn65dsi83";
+            reg = <0x2d>;
+
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+            vcc-supply = <&reg_sn65dsi83_1v8>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    endpoint {
+                        remote-endpoint = <&panel_in_lvds>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
new file mode 100644
index 0000000000..6ec6d287bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI86 DSI to eDP bridge chip
+
+maintainers:
+  - Sandeep Panda <spanda@codeaurora.org>
+
+description: |
+  The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
+  https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
+
+properties:
+  compatible:
+    const: ti,sn65dsi86
+
+  reg:
+    enum: [ 0x2c, 0x2d ]
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for bridge_en pin (active high).
+
+  suspend-gpios:
+    maxItems: 1
+    description: GPIO specifier for GPIO1 pin on bridge (active low).
+
+  no-hpd:
+    type: boolean
+    description:
+      Set if the HPD line on the bridge isn't hooked up to anything or is
+      otherwise unusable.
+
+  vccio-supply:
+    description: A 1.8V supply that powers the digital IOs.
+
+  vpll-supply:
+    description: A 1.8V supply that powers the DisplayPort PLL.
+
+  vcca-supply:
+    description: A 1.2V supply that powers the analog circuits.
+
+  vcc-supply:
+    description: A 1.2V supply that powers the digital core.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Clock specifier for input reference clock. The reference clock rate must
+      be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
+
+  clock-names:
+    const: refclk
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is pin number, second cell is flags.  GPIO pin numbers are
+      1-based to match the datasheet.  See ../../gpio/gpio.txt for more
+      information.
+
+  '#pwm-cells':
+    const: 1
+    description: See ../../pwm/pwm.yaml for description of the cell formats.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for eDP output (panel or connector).
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                oneOf:
+                  - minItems: 1
+                    maxItems: 1
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                    description:
+                      If you have 1 logical lane the bridge supports routing
+                      to either port 0 or port 1.  Port 0 is suggested.
+
+                  - minItems: 2
+                    maxItems: 2
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                    description:
+                      If you have 2 logical lanes the bridge supports
+                      reordering but only on physical ports 0 and 1.
+
+                  - minItems: 4
+                    maxItems: 4
+                    uniqueItems: true
+                    items:
+                      enum:
+                        - 0
+                        - 1
+                        - 2
+                        - 3
+                    description:
+                      If you have 4 logical lanes the bridge supports
+                      reordering in any way.
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum:
+                    - 0
+                    - 1
+
+            dependencies:
+              lane-polarities: [data-lanes]
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - vpll-supply
+  - vcca-supply
+  - vcc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "boe,nv133fhm-n62";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
+        suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
+
+        interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&pm8916_l17>;
+        vcca-supply = <&pm8916_l6>;
+        vpll-supply = <&pm8916_l17>;
+        vcc-supply = <&pm8916_l6>;
+
+        clock-names = "refclk";
+        clocks = <&input_refclk>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            edp_bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            edp_bridge_out: endpoint {
+              data-lanes = <2 1 3 0>;
+              lane-polarities = <0 1 0 1>;
+              remote-endpoint = <&edp_panel_in>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
new file mode 100644
index 0000000000..4c5dd8ec29
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TFP410 DPI to DVI encoder
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: ti,tfp410
+
+  reg:
+    description: I2C address of the device.
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  ti,deskew:
+    description:
+      Data de-skew value in 350ps increments, from 0 to 7, as configured
+      through the DK[3:1] pins. The de-skew multiplier is computed as
+      (DK[3:1] - 4), so it ranges from -4 to 3.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DPI input port.
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              pclk-sample:
+                description:
+                  Endpoint sampling edge.
+                enum:
+                  - 0  # Falling edge
+                  - 1  # Rising edge
+                default: 0
+
+              bus-width:
+                description:
+                  Endpoint bus width.
+                enum:
+                  - 12  # 12 data lines connected and dual-edge mode
+                  - 24  # 24 data lines connected and single-edge mode
+                default: 24
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DVI output port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+
+if:
+  required:
+    - reg
+then:
+  properties:
+    ti,deskew: false
+else:
+  required:
+    - ti,deskew
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    tfp410: encoder {
+        compatible = "ti,tfp410";
+        powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+        ti,deskew = <3>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                tfp410_in: endpoint {
+                    pclk-sample = <1>;
+                    bus-width = <24>;
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                tfp410_out: endpoint {
+                    remote-endpoint = <&dvi_connector_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
new file mode 100644
index 0000000000..6c1de0b217
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tc358762
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  reset-gpios:
+    maxItems: 1
+
+  vddc-supply:
+    description: Regulator for 1.2V internal core power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vddc-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        reg = <0>;
+        compatible = "toshiba,tc358762";
+        vddc-supply = <&vcc_1v2_reg>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dsi_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
new file mode 100644
index 0000000000..8666074005
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358764 MIPI-DSI to LVDS bridge
+
+maintainers:
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+
+properties:
+  compatible:
+    const: toshiba,tc358764
+
+  reg:
+    description: Virtual channel number of a DSI peripheral
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vddc-supply:
+    description: Core voltage supply, 1.2V
+
+  vddio-supply:
+    description: I/O voltage supply, 1.8V or 3.3V
+
+  vddlvds-supply:
+    description: LVDS1/2 voltage supply, 3.3V
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input, if the bridge DSI controlled
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vddc-supply
+  - vddio-supply
+  - vddlvds-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@0 {
+            compatible = "toshiba,tc358764";
+            reg = <0>;
+
+            reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+            vddc-supply = <&vcc_1v2_reg>;
+            vddio-supply = <&vcc_1v8_reg>;
+            vddlvds-supply = <&vcc_3v3_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    lvds_ep: endpoint {
+                      remote-endpoint = <&panel_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
new file mode 100644
index 0000000000..ae894d996d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge
+
+maintainers:
+  - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+
+description: |
+  The TC358767/TC358867/TC9595 is bridge device which
+  converts DSI/DPI to eDP/DP .
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - toshiba,tc358867
+              - toshiba,tc9595
+          - const: toshiba,tc358767
+      - const: toshiba,tc358767
+
+  reg:
+    enum:
+      - 0x68
+      - 0x0f
+    description: |
+        i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+
+  clock-names:
+    const: ref
+
+  clocks:
+    maxItems: 1
+    description: |
+        OF device-tree clock specification for refclk input. The reference.
+        clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for SD pin(active high shutdown input)
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for RSTX pin(active low system reset)
+
+  interrupts:
+    maxItems: 1
+
+  toshiba,hpd-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+    description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+            DSI input port. The remote endpoint phandle should be a
+            reference to a valid DSI output endpoint node
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            eDP/DP output port. The remote endpoint phandle should be a
+            reference to a valid eDP panel input endpoint node. This port is
+            optional, treated as DP panel if not defined
+
+    oneOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* DPI input and eDP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_0: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    /* DPI input and DP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_1: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
new file mode 100644
index 0000000000..779d8c57f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description: |
+  The TC358768/TC358778 is bridge device which converts RGB to DSI.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tc358768
+      - toshiba,tc358778
+
+  reg:
+    maxItems: 1
+    description: base I2C address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low RESX pin
+
+  vddc-supply:
+    description: Regulator for 1.2V internal core power.
+
+  vddmipi-supply:
+    description: Regulator for 1.2V for the MIPI.
+
+  vddio-supply:
+    description: Regulator for 1.8V - 3.3V IO power.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          Video port for RGB input
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lines:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                enum: [ 16, 18, 24 ]
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for DSI output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vddc-supply
+  - vddmipi-supply
+  - vddio-supply
+  - ports
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dsi_bridge: dsi@e {
+        compatible = "toshiba,tc358768";
+        reg = <0xe>;
+
+        clocks = <&tc358768_refclk>;
+        clock-names = "refclk";
+
+        reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>;
+
+        vddc-supply = <&v1_2d>;
+        vddmipi-supply = <&v1_2d>;
+        vddio-supply = <&v3_3d>;
+
+        dsi_bridge_ports: ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            rgb_in: endpoint {
+              remote-endpoint = <&dpi_out>;
+              data-lines = <24>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            dsi_out: endpoint {
+              remote-endpoint = <&lcd_in>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 0000000000..d879c70059
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+description: |
+  This binding supports DSI to LVDS bridge TC358775
+
+  MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+  Video frame size:
+  Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+  limited by 135 MHz LVDS speed
+  Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+  panel, limited by 270 MHz LVDS speed.
+
+properties:
+  compatible:
+    const: toshiba,tc358775
+
+  reg:
+    maxItems: 1
+    description: i2c address of the bridge, 0x0f
+
+  vdd-supply:
+    description: 1.2V LVDS Power Supply
+
+  vddio-supply:
+    description: 1.8V IO Power Supply
+
+  stby-gpios:
+    maxItems: 1
+    description: Standby pin, Low active
+
+  reset-gpios:
+    maxItems: 1
+    description: Hardware reset, Low active
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          DSI Input. The remote endpoint phandle should be a
+          reference to a valid mipi_dsi_host device node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for LVDS output (panel or connector).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Video port for Dual link LVDS output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - stby-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* For single-link LVDS display panel */
+
+    i2c@78b8000 {
+        /* On High speed expansion */
+        label = "HS-I2C2";
+        reg = <0x078b8000 0x500>;
+        clock-frequency = <400000>; /* fastmode operation */
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tc_bridge: bridge@f {
+            compatible = "toshiba,tc358775";
+            reg = <0x0f>;
+
+            vdd-supply = <&pm8916_l2>;
+            vddio-supply = <&pm8916_l6>;
+
+            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    d2l_in_test: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lvds_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+
+    dsi@1a98000 {
+        reg = <0x1a98000 0x25c>;
+        reg-names = "dsi_ctrl";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    remote-endpoint = <&d2l_in_test>;
+                    data-lanes = <0 1 2 3>;
+                };
+             };
+         };
+     };
+
+  - |
+    /* For dual-link LVDS display panel */
+
+    i2c@78b8000 {
+        /* On High speed expansion */
+        label = "HS-I2C2";
+        reg = <0x078b8000 0x500>;
+        clock-frequency = <400000>; /* fastmode operation */
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tc_bridge_dual: bridge@f {
+            compatible = "toshiba,tc358775";
+            reg = <0x0f>;
+
+            vdd-supply = <&pm8916_l2>;
+            vddio-supply = <&pm8916_l6>;
+
+            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    d2l_in_dual: endpoint {
+                        remote-endpoint = <&dsi0_out_dual>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    lvds0_out: endpoint {
+                        remote-endpoint = <&panel_in0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    lvds1_out: endpoint {
+                        remote-endpoint = <&panel_in1>;
+                    };
+                };
+            };
+        };
+    };
+
+    dsi@1a98000 {
+        reg = <0x1a98000 0x25c>;
+        reg-names = "dsi_ctrl";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@1 {
+                reg = <1>;
+                dsi0_out_dual: endpoint {
+                    remote-endpoint = <&d2l_in_dual>;
+                    data-lanes = <0 1 2 3>;
+                };
+             };
+         };
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
new file mode 100644
index 0000000000..84c75f8498
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
@@ -0,0 +1,47 @@
+* Cirrus Logic CLPS711X Framebuffer
+
+Required properties:
+- compatible: Shall contain "cirrus,ep7209-fb".
+- reg       : Physical base address and length of the controller's registers +
+              location and size of the framebuffer memory.
+- clocks    : phandle + clock specifier pair of the FB reference clock.
+- display   : phandle to a display node as described in
+              Documentation/devicetree/bindings/display/panel/display-timing.txt.
+              Additionally, the display node has to define properties:
+  - bits-per-pixel: Bits per pixel.
+  - ac-prescale   : LCD AC bias frequency. This frequency is the required
+                    AC bias frequency for a given manufacturer's LCD plate.
+  - cmap-invert   : Invert the color levels (Optional).
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+	fb: fb@800002c0 {
+		compatible = "cirrus,ep7312-fb", "cirrus,ep7209-fb";
+		reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+		clocks = <&clks 2>;
+		lcd-supply = <&reg5v0>;
+		display = <&display>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
new file mode 100644
index 0000000000..a31ca2d52b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/analog-tv-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog TV Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    enum:
+      - composite-video-connector
+      - svideo-connector
+
+  label: true
+
+  sdtv-standards:
+    description:
+      Limit the supported TV standards on a connector to the given ones. If
+      not specified all TV standards are allowed. Possible TV standards are
+      defined in include/dt-bindings/display/sdtv-standards.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing analog TV signals
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/sdtv-standards.h>
+
+    connector {
+        compatible = "composite-video-connector";
+        label = "tv";
+        sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+        port {
+            tv_connector_in: endpoint {
+                remote-endpoint = <&venc_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
new file mode 100644
index 0000000000..22792a79e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dp-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort Connector
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+properties:
+  compatible:
+    const: dp-connector
+
+  label: true
+
+  type:
+    enum:
+      - full-size
+      - mini
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  dp-pwr-supply:
+    description: Power supply for the DP_PWR pin
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing DP signals
+
+required:
+  - compatible
+  - type
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "dp-connector";
+        label = "dp0";
+        type = "full-size";
+
+        port {
+            dp_connector_in: endpoint {
+                remote-endpoint = <&dp_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
new file mode 100644
index 0000000000..93eb14294e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DVI Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: dvi-connector
+
+  label: true
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  ddc-i2c-bus:
+    description: phandle link to the I2C controller used for DDC EDID probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  analog:
+    type: boolean
+    description: the connector has DVI analog pins
+
+  digital:
+    type: boolean
+    description: the connector has DVI digital pins
+
+  dual-link:
+    type: boolean
+    description: the connector has pins for DVI dual-link
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing DVI signals
+
+required:
+  - compatible
+  - port
+
+anyOf:
+  - required:
+      - analog
+  - required:
+      - digital
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "dvi-connector";
+        label = "dvi";
+
+        digital;
+
+        ddc-i2c-bus = <&i2c3>;
+
+        port {
+            dvi_connector_in: endpoint {
+                remote-endpoint = <&tfp410_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
new file mode 100644
index 0000000000..3ee8f92259
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: hdmi-connector
+
+  type:
+    description: The HDMI connector type
+    enum:
+      - a   # Standard full size
+      - b   # Never deployed?
+      - c   # Mini
+      - d   # Micro
+      - e   # automotive
+
+  label: true
+
+  hpd-gpios:
+    description: A GPIO line connected to HPD
+    maxItems: 1
+
+  ddc-i2c-bus:
+    description: phandle link to the I2C controller used for DDC EDID probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ddc-en-gpios:
+    description: GPIO signal to enable DDC bus
+    maxItems: 1
+
+  hdmi-pwr-supply:
+    description: Power supply for the HDMI +5V Power pin
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing HDMI signals
+
+required:
+  - compatible
+  - port
+  - type
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "hdmi-connector";
+        label = "hdmi";
+
+        type = "a";
+
+        port {
+            hdmi_connector_in: endpoint {
+                remote-endpoint = <&tpd12s015_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
new file mode 100644
index 0000000000..25f8680020
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/vga-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VGA Connector
+
+maintainers:
+  - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: vga-connector
+
+  label: true
+
+  ddc-i2c-bus:
+    description: phandle link to the I2C controller used for DDC EDID probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Connection to controller providing VGA signals
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    connector {
+        compatible = "vga-connector";
+        label = "vga";
+
+        ddc-i2c-bus = <&i2c3>;
+
+        port {
+            vga_connector_in: endpoint {
+                remote-endpoint = <&adv7123_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
new file mode 100644
index 0000000000..0ece7b0179
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dp-aux-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort AUX bus
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  DisplayPort controllers provide a control channel to the sinks that
+  are hooked up to them. This is the DP AUX bus. Over the DP AUX bus
+  we can query properties about a sink and also configure it. In
+  particular, DP sinks support DDC over DP AUX which allows tunneling
+  a standard I2C DDC connection over the AUX channel.
+
+  To model this relationship, DP sinks should be placed as children
+  of the DP controller under the "aux-bus" node.
+
+  At the moment, this binding only handles the eDP case. It is
+  possible it will be extended in the future to handle the DP case.
+  For DP, presumably a connector would be listed under the DP AUX
+  bus instead of a panel.
+
+properties:
+  $nodename:
+    const: aux-bus
+
+  panel:
+    $ref: panel/panel-common.yaml#
+
+additionalProperties: false
+
+required:
+  - panel
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
new file mode 100644
index 0000000000..67ce10307e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for DSI Display Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to DSI, Display
+  Serial Interface controllers and attached panels. It doesn't constitute
+  a device tree binding specification by itself but is meant to be referenced
+  by device tree bindings.
+
+  When referenced from panel device tree bindings the properties defined in
+  this document are defined as follows. The panel device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+  Notice: this binding concerns DSI panels connected directly to a master
+  without any intermediate port graph to the panel. Each DSI master
+  can control one to four virtual channels to one panel. Each virtual
+  channel should have a node "panel" for their virtual channel with their
+  reg-property set to the virtual channel number, usually there is just
+  one virtual channel, number 0.
+
+properties:
+  $nodename:
+    pattern: "^dsi(@.*)?$"
+
+  clock-master:
+    type: boolean
+    description:
+      Should be enabled if the host is being used in conjunction with
+      another DSI host to drive the same peripheral. Hardware supporting
+      such a configuration generally requires the data on both the busses
+      to be driven by the same clock. Only the DSI host instance
+      controlling this clock should contain this property.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^panel@[0-3]$":
+    description: Panels connected to the DSI link
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+        description:
+          The virtual channel number of a DSI peripheral. Must be in the range
+          from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI
+          peripherals respond to more than a single virtual channel. In that
+          case the reg property can take multiple entries, one for each virtual
+          channel that the peripheral responds to.
+
+      enforce-video-mode:
+        type: boolean
+        description:
+          The best option is usually to run a panel in command mode, as this
+          gives better control over the panel hardware. However for different
+          reasons like broken hardware, missing features or testing, it may be
+          useful to be able to force a command mode-capable panel into video
+          mode.
+
+    required:
+      - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi@a0351000 {
+        reg = <0xa0351000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&ab8500_ldo_aux1_reg>;
+            reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
new file mode 100644
index 0000000000..3a40159032
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -0,0 +1,112 @@
+The Exynos display port interface should be configured based on
+the type of panel connected to it.
+
+We use two nodes:
+	-dp-controller node
+	-dptx-phy node(defined inside dp-controller node)
+
+For the DP-PHY initialization, we use the dptx-phy node.
+Required properties for dptx-phy: deprecated, use phys and phy-names
+	-reg: deprecated
+		Base address of DP PHY register.
+	-samsung,enable-mask: deprecated
+		The bit-mask used to enable/disable DP PHY.
+
+For the Panel initialization, we read data from dp-controller node.
+Required properties for dp-controller:
+	-compatible:
+		should be "samsung,exynos5-dp".
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-clocks:
+		from common clock binding: handle to dp clock.
+	-clock-names:
+		from common clock binding: Shall be "dp".
+	-phys:
+		from general PHY binding: the phandle for the PHY device.
+	-phy-names:
+		from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+	-interlaced:
+		interlace scan mode.
+			Progressive if defined, Interlaced if not defined
+	-vsync-active-high:
+		VSYNC polarity configuration.
+			High if defined, Low if not defined
+	-hsync-active-high:
+		HSYNC polarity configuration.
+			High if defined, Low if not defined
+	-samsung,hpd-gpio:
+		Hotplug detect GPIO.
+			Indicates which GPIO should be used for hotplug
+			detection
+	-video interfaces: Device node can contain video interface port
+			nodes according to [1].
+	- display-timings: timings for the connected panel as described by
+		Documentation/devicetree/bindings/display/panel/display-timing.txt
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+	-phys (required)
+	-phy-names (required)
+	-hpd-gpios (optional)
+	 force-hpd (optional)
+
+Deprecated properties for DisplayPort:
+-interlaced:            deprecated prop that can parsed from drm_display_mode.
+-vsync-active-high:     deprecated prop that can parsed from drm_display_mode.
+-hsync-active-high:     deprecated prop that can parsed from drm_display_mode.
+-samsung,ycbcr-coeff:   deprecated prop that can parsed from drm_display_mode.
+-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
+-samsung,color-space:   deprecated prop that can parsed from drm_display_info.
+-samsung,color-depth:   deprecated prop that can parsed from drm_display_info.
+-samsung,link-rate:     deprecated prop that can reading from monitor by dpcd method.
+-samsung,lane-count:    deprecated prop that can reading from monitor by dpcd method.
+-samsung,hpd-gpio:      deprecated name for hpd-gpios.
+
+-------------------------------------------------------------------------------
+
+Example:
+
+SOC specific portion:
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		clocks = <&clock 342>;
+		clock-names = "dp";
+
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+Board Specific portion:
+	dp-controller {
+		display-timings {
+			native-mode = <&lcd_timing>;
+			lcd_timing: 1366x768 {
+				clock-frequency = <70589280>;
+				hactive = <1366>;
+				vactive = <768>;
+				hfront-porch = <40>;
+				hback-porch = <40>;
+				hsync-len = <32>;
+				vback-porch = <10>;
+				vfront-porch = <12>;
+				vsync-len = <6>;
+			};
+		};
+
+		ports {
+			port@0 {
+				dp_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
new file mode 100644
index 0000000000..e2ee777673
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/faraday,tve200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday TV Encoder TVE200
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,tve200
+      - items:
+          - const: cortina,gemini-tvc
+          - const: faraday,tve200
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: TVE
+
+  clocks:
+    minItems: 2
+
+  resets:
+    minItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    display-controller@6a000000 {
+      compatible = "faraday,tve200";
+      reg = <0x6a000000 0x1000>;
+      interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+      resets = <&syscon GEMINI_RESET_TVC>;
+      clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+               <&syscon GEMINI_CLK_TVC>;
+      clock-names = "PCLK", "TVE";
+
+      port {
+        display_out: endpoint {
+          remote-endpoint = <&panel_in>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
new file mode 100644
index 0000000000..63ec2a624a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,dcu.txt
@@ -0,0 +1,34 @@
+Device Tree bindings for Freescale DCU DRM Driver
+
+Required properties:
+- compatible:		Should be one of
+	* "fsl,ls1021a-dcu".
+	* "fsl,vf610-dcu".
+
+- reg:			Address and length of the register set for dcu.
+- clocks:		Handle to "dcu" and "pix" clock (in the order below)
+			This can be the same clock (e.g. LS1021a)
+			See ../clocks/clock-bindings.txt for details.
+- clock-names:		Should be "dcu" and "pix"
+			See ../clocks/clock-bindings.txt for details.
+- big-endian		Boolean property, LS1021A DCU registers are big-endian.
+- port			Video port for the panel output
+
+Optional properties:
+- fsl,tcon:		The phandle to the timing controller node.
+
+Examples:
+dcu: dcu@2ce0000 {
+	compatible = "fsl,ls1021a-dcu";
+	reg = <0x0 0x2ce0000 0x0 0x10000>;
+	clocks = <&platform_clk 0>, <&platform_clk 0>;
+	clock-names = "dcu", "pix";
+	big-endian;
+	fsl,tcon = <&tcon>;
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_out>;
+	     };
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
new file mode 100644
index 0000000000..fc11ab5fc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX LCD Interface (LCDIF)
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Stefan Agner <stefan@agner.ch>
+
+description: |
+  (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-lcdif
+          - fsl,imx28-lcdif
+          - fsl,imx6sx-lcdif
+          - fsl,imx8mp-lcdif
+          - fsl,imx93-lcdif
+      - items:
+          - enum:
+              - fsl,imx6sl-lcdif
+              - fsl,imx6sll-lcdif
+              - fsl,imx6ul-lcdif
+              - fsl,imx7d-lcdif
+              - fsl,imx8mm-lcdif
+              - fsl,imx8mn-lcdif
+              - fsl,imx8mq-lcdif
+          - const: fsl,imx6sx-lcdif
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel clock
+      - description: Bus clock
+      - description: Display AXI clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pix
+      - const: axi
+      - const: disp_axi
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: The LCDIF output port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - port
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx6sx-lcdif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          maxItems: 3
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-lcdif
+              - fsl,imx93-lcdif
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          minItems: 3
+          maxItems: 3
+      required:
+        - clock-names
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-lcdif
+                - fsl,imx8mp-lcdif
+                - fsl,imx93-lcdif
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sl-lcdif
+              - fsl,imx6sx-lcdif
+              - fsl,imx8mm-lcdif
+              - fsl,imx8mn-lcdif
+              - fsl,imx8mp-lcdif
+              - fsl,imx93-lcdif
+    then:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@2220000 {
+        compatible = "fsl,imx6sx-lcdif";
+        reg = <0x02220000 0x4000>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+                 <&clks IMX6SX_CLK_LCDIF_APB>,
+                 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+        clock-names = "pix", "axi", "disp_axi";
+        power-domains = <&pd_disp>;
+
+        port {
+            endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
new file mode 100644
index 0000000000..4750087478
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,tcon.txt
@@ -0,0 +1,17 @@
+Device Tree bindings for Freescale TCON Driver
+
+Required properties:
+- compatible:		Should be one of
+	* "fsl,vf610-tcon".
+
+- reg:			Address and length of the register set for tcon.
+- clocks:		From common clock binding: handle to tcon ipg clock.
+- clock-names:		From common clock binding: Shall be "ipg".
+
+Examples:
+timing-controller@4003d000 {
+	compatible = "fsl,vf610-tcon";
+	reg = <0x4003d000 0x1000>;
+	clocks = <&clks VF610_CLK_TCON0>;
+	clock-names = "ipg";
+};
diff --git a/Documentation/devicetree/bindings/display/google,goldfish-fb.txt b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt
new file mode 100644
index 0000000000..751fa9f51e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt
@@ -0,0 +1,17 @@
+Android Goldfish framebuffer
+
+Android Goldfish framebuffer device used by Android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-fb"
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	display-controller@1f008000 {
+		compatible = "google,goldfish-fb";
+		interrupts = <0x10>;
+		reg = <0x1f008000 0x100>;
+	};
diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
new file mode 100644
index 0000000000..e641f66476
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
@@ -0,0 +1,26 @@
+Himax HX8357D display panels
+
+This binding is for display panels using a Himax HX8357D controller in SPI
+mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
+
+Required properties:
+- compatible:	"adafruit,yx350hv15", "himax,hx8357d"
+- dc-gpios:	D/C pin
+- reg:		address of the panel on the SPI bus
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight:	phandle of the backlight device attached to the panel
+
+Example:
+	display@0{
+		compatible = "adafruit,yx350hv15", "himax,hx8357d";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+		rotation = <90>;
+		backlight = <&backlight>;
+	};
diff --git a/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
new file mode 100644
index 0000000000..d270bfe4e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
@@ -0,0 +1,72 @@
+Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
+
+A DSI Host Controller resides in the middle of display controller and external
+HDMI converter or panel.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-dsi".
+- reg: physical base address and length of dsi controller's registers.
+- clocks: contains APB clock phandle + clock-specifier pair.
+- clock-names: should be "pclk".
+- ports: contains DSI controller input and output sub port.
+  The input port connects to ADE output port with the reg value "0".
+  The output port with the reg value "1", it could connect to panel or
+  any other bridge endpoints.
+  See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+	dsi: dsi@f4107800 {
+		compatible = "hisilicon,hi6220-dsi";
+		reg = <0x0 0xf4107800 0x0 0x100>;
+		clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+		clock-names = "pclk";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* 0 for input port */
+			port@0 {
+				reg = <0>;
+				dsi_in: endpoint {
+					remote-endpoint = <&ade_out>;
+				};
+			};
+		};
+	};
+
+
+Board specific:
+	&dsi {
+		status = "ok";
+
+		ports {
+			/* 1 for output port */
+			port@1 {
+				reg = <1>;
+
+				dsi_out0: endpoint@0 {
+					remote-endpoint = <&adv7533_in>;
+				};
+			};
+		};
+	};
+
+	&i2c2 {
+		...
+
+		adv7533: adv7533@39 {
+			...
+
+			port {
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out0>;
+				};
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 0000000000..305a0e72a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,64 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-ade".
+- reg: physical base address and length of the ADE controller's registers.
+- hisilicon,noc-syscon: ADE NOC QoS syscon.
+- resets: The ADE reset controller node.
+- interrupt: the ldi vblank interrupt number used.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: should contain:
+  "clk_ade_core" for the ADE core clock.
+  "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
+  jpeg codec.
+  "clk_ade_pix" for the ADE pixel clock.
+- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
+  phandle + clock-specifier pairs.
+- assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
+  The rate of "clk_ade_core" could be "360000000" or "180000000";
+  The rate of "clk_codec_jpeg" could be or less than "1440000000".
+  These rate values could be configured according to performance and power
+  consumption.
+- port: the output port. This contains one endpoint subnode, with its
+  remote-endpoint set to the phandle of the connected DSI input endpoint.
+  See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+	ade: ade@f4100000 {
+		compatible = "hisilicon,hi6220-ade";
+		reg = <0x0 0xf4100000 0x0 0x7800>;
+		reg-names = "ade_base";
+		hisilicon,noc-syscon = <&medianoc_ade>;
+		resets = <&media_ctrl MEDIA_ADE>;
+		interrupts = <0 115 4>; /* ldi interrupt */
+
+		clocks = <&media_ctrl HI6220_ADE_CORE>,
+			 <&media_ctrl HI6220_CODEC_JPEG>,
+			 <&media_ctrl HI6220_ADE_PIX_SRC>;
+		/*clock name*/
+		clock-names  = "clk_ade_core",
+			       "clk_codec_jpeg",
+			       "clk_ade_pix";
+
+		assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+			<&media_ctrl HI6220_CODEC_JPEG>;
+		assigned-clock-rates = <360000000>, <288000000>;
+		dma-coherent;
+
+		port {
+			ade_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9225.txt b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt
new file mode 100644
index 0000000000..a59feb5201
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt
@@ -0,0 +1,25 @@
+Ilitek ILI9225 display panels
+
+This binding is for display panels using an Ilitek ILI9225 controller in SPI
+mode.
+
+Required properties:
+- compatible:	"vot,v220hf01a-t", "ilitek,ili9225"
+- rs-gpios:	Register select signal
+- reset-gpios:	Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	display@0{
+		compatible = "vot,v220hf01a-t", "ilitek,ili9225";
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+		rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		rotation = <270>;
+	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
new file mode 100644
index 0000000000..1f8f2182e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9486 display panels
+
+maintainers:
+  - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
+
+description:
+  This binding is for display panels using an Ilitek ILI9486 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Waveshare 3.5" 320x480 Color TFT LCD
+          - waveshare,rpi-lcd-35
+          # Ozzmaker 3.5" 320x480 Color TFT LCD
+          - ozzmaker,piscreen
+      - const: ilitek,ili9486
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+
+            display@0{
+                    compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
new file mode 100644
index 0000000000..c2b29622bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Pengutronix Kernel Team <kernel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-fb
+          - fsl,imx21-fb
+      - items:
+          - enum:
+              - fsl,imx25-fb
+              - fsl,imx27-fb
+          - const: fsl,imx21-fb
+      - items:
+          - const: fsl,imx25-lcdc
+          - const: fsl,imx21-lcdc
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: per
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  lcd-supply:
+    description:
+      Regulator for LCD supply voltage.
+
+  fsl,dmacr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override value for DMA Control Register
+
+  fsl,lpccr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Contrast Control Register value.
+
+  fsl,lscr1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      LCDC Sharp Configuration Register value.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx1-lcdc
+              - fsl,imx21-lcdc
+    then:
+      properties:
+        display: false
+        fsl,dmacr: false
+        fsl,lpccr: false
+        fsl,lscr1: false
+
+      required:
+        - port
+
+    else:
+      properties:
+        port: false
+
+      required:
+        - display
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    lcdc@53fbc000 {
+        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+        reg = <0x53fbc000 0x4000>;
+        interrupts = <39>;
+        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+        clock-names = "ipg", "ahb", "per";
+
+        port {
+            parallel_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+  - |
+    imxfb: fb@10021000 {
+        compatible = "fsl,imx21-fb";
+        interrupts = <61>;
+        reg = <0x10021000 0x1000>;
+        display = <&display0>;
+        clocks = <&clks 103>, <&clks 49>, <&clks 66>;
+        clock-names = "ipg", "ahb", "per";
+    };
+
+    display0: display0 {
+        model = "Primeview-PD050VL1";
+        bits-per-pixel = <16>;
+        fsl,pcr = <0xf0c88080>; /* non-standard but required */
+
+        display-timings {
+            native-mode = <&timing_disp0>;
+            timing_disp0: timing0 {
+                hactive = <640>;
+                vactive = <480>;
+                hback-porch = <112>;
+                hfront-porch = <36>;
+                hsync-len = <32>;
+                vback-porch = <33>;
+                vfront-porch = <33>;
+                vsync-len = <2>;
+                clock-frequency = <25000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
new file mode 100644
index 0000000000..7979cf07f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DWC HDMI TX Encoder
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6dl-hdmi
+      - fsl,imx6q-hdmi
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The HDMI DDC bus can be connected to either a system I2C master or the
+      functionally-reduced I2C master contained in the DWC HDMI. When connected
+      to a system I2C master this property contains a phandle to that I2C
+      master controller.
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the iomuxc-gpr region containing the HDMI multiplexer control
+      register.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      This device has four video ports, corresponding to the four inputs of the
+      HDMI multiplexer. Each port shall have a single endpoint.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First input of the HDMI multiplexer
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second input of the HDMI multiplexer
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Third input of the HDMI multiplexer
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Fourth input of the HDMI multiplexer
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+      - required:
+          - port@2
+      - required:
+          - port@3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpr
+  - interrupts
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    hdmi: hdmi@120000 {
+        reg = <0x00120000 0x9000>;
+        interrupts = <0 115 0x04>;
+        gpr = <&gpr>;
+        clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+                 <&clks IMX6QDL_CLK_HDMI_ISFR>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                hdmi_mux_0: endpoint {
+                    remote-endpoint = <&ipu1_di0_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_mux_1: endpoint {
+                    remote-endpoint = <&ipu1_di1_hdmi>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
new file mode 100644
index 0000000000..3c35338a28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -0,0 +1,162 @@
+Freescale i.MX DRM master device
+================================
+
+The freescale i.MX DRM master device is a virtual device needed to list all
+IPU or other display interface nodes that comprise the graphics subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-display-subsystem"
+- ports: Should contain a list of phandles pointing to display interface ports
+  of IPU devices
+
+example:
+
+display-subsystem {
+	compatible = "fsl,imx-display-subsystem";
+	ports = <&ipu_di0>;
+};
+
+
+Freescale i.MX IPUv3
+====================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
+  - imx51
+  - imx53
+  - imx6q
+  - imx6qp
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain sync interrupt and error interrupt,
+  in this order.
+- resets: phandle pointing to the system reset controller and
+          reset line index, see reset/fsl,imx-src.txt for details
+Additional required properties for fsl,imx6qp-ipu:
+- fsl,prg: phandle to prg node associated with this IPU instance
+Optional properties:
+- port@[0-3]: Port nodes with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Ports 0 and 1 should correspond to CSI0 and CSI1,
+  ports 2 and 3 should correspond to DI0 and DI1, respectively.
+
+example:
+
+ipu: ipu@18000000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx53-ipu";
+	reg = <0x18000000 0x080000000>;
+	interrupts = <11 10>;
+	resets = <&src 2>;
+
+	ipu_di0: port@2 {
+		reg = <2>;
+
+		ipu_di0_disp0: endpoint {
+			remote-endpoint = <&display_in>;
+		};
+	};
+};
+
+Freescale i.MX PRE (Prefetch Resolve Engine)
+============================================
+
+Required properties:
+- compatible: should be "fsl,imx6qp-pre"
+- reg: should be register base and length as documented in the
+  datasheet
+- clocks : phandle to the PRE axi clock input, as described
+  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+- clock-names: should be "axi"
+- interrupts: should contain the PRE interrupt
+- fsl,iram: phandle pointing to the mmio-sram device node, that should be
+  used for the PRE SRAM double buffer.
+
+example:
+
+pre@21c8000 {
+	compatible = "fsl,imx6qp-pre";
+	reg = <0x021c8000 0x1000>;
+	interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&clks IMX6QDL_CLK_PRE0>;
+	clock-names = "axi";
+	fsl,iram = <&ocram2>;
+};
+
+Freescale i.MX PRG (Prefetch Resolve Gasket)
+============================================
+
+Required properties:
+- compatible: should be "fsl,imx6qp-prg"
+- reg: should be register base and length as documented in the
+  datasheet
+- clocks : phandles to the PRG ipg and axi clock inputs, as described
+  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+- clock-names: should be "ipg" and "axi"
+- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
+  PRE as the first entry and the muxable PREs following.
+
+example:
+
+prg@21cc000 {
+	compatible = "fsl,imx6qp-prg";
+	reg = <0x021cc000 0x1000>;
+	clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+		 <&clks IMX6QDL_CLK_PRG0_AXI>;
+	clock-names = "ipg", "axi";
+	fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,imx-parallel-display"
+Optional properties:
+- interface-pix-fmt: How this display is connected to the
+  display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
+  and "lvds666".
+- edid: verbatim EDID data block describing attached display.
+- ddc: phandle describing the i2c bus handling the display data
+  channel
+- port@[0-1]: Port nodes with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Port 0 is the input port connected to the IPU display interface,
+  port 1 is the output port connected to a panel.
+
+example:
+
+disp0 {
+	compatible = "fsl,imx-parallel-display";
+	edid = [edid-data];
+	interface-pix-fmt = "rgb24";
+
+	port@0 {
+		reg = <0>;
+
+		display_in: endpoint {
+			remote-endpoint = <&ipu_di0_disp0>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+panel {
+	...
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
new file mode 100644
index 0000000000..8e6e7d7979
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -0,0 +1,147 @@
+Device-Tree bindings for LVDS Display Bridge (ldb)
+
+LVDS Display Bridge
+===================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
+                Both LDB versions are similar, but i.MX6 has an additional
+                multiplexer in the front to select any of the four IPU display
+                interfaces as input for each LVDS channel.
+ - gpr : should be <&gpr> on i.MX53 and i.MX6q.
+         The phandle points to the iomuxc-gpr region containing the LVDS
+         control register.
+- clocks, clock-names : phandles to the LDB divider and selector clocks and to
+                        the display interface selector clocks, as described in
+                        Documentation/devicetree/bindings/clock/clock-bindings.txt
+        The following clocks are expected on i.MX53:
+                "di0_pll" - LDB LVDS channel 0 mux
+                "di1_pll" - LDB LVDS channel 1 mux
+                "di0" - LDB LVDS channel 0 gate
+                "di1" - LDB LVDS channel 1 gate
+                "di0_sel" - IPU1 DI0 mux
+                "di1_sel" - IPU1 DI1 mux
+        On i.MX6q the following additional clocks are needed:
+                "di2_sel" - IPU2 DI0 mux
+                "di3_sel" - IPU2 DI1 mux
+        The needed clock numbers for each are documented in
+        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+
+Optional properties:
+ - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
+ - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
+               not used on i.MX6q
+ - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
+   be configured - one input will be distributed on both outputs in dual
+   channel mode
+
+LVDS Channel
+============
+
+Each LVDS Channel has to contain either an of graph link to a panel device node
+or a display-timings node that describes the video timings for the connected
+LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
+
+Required properties:
+ - reg : should be <0> or <1>
+ - port: Input and output port nodes with endpoint definitions as defined in
+   Documentation/devicetree/bindings/graph.txt.
+   On i.MX5, the internal two-input-multiplexer is used. Due to hardware
+   limitations, only one input port (port@[0,1]) can be used for each channel
+   (lvds-channel@[0,1], respectively).
+   On i.MX6, there should be four input ports (port@[0-3]) that correspond
+   to the four LVDS multiplexer inputs.
+   A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
+   to a panel input port. Optionally, the output port can be left out if
+   display-timings are used instead.
+
+Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - display-timings : A node that describes the display timings as defined in
+   Documentation/devicetree/bindings/display/panel/display-timing.txt.
+ - fsl,data-mapping : should be "spwg" or "jeida"
+                      This describes how the color bits are laid out in the
+                      serialized LVDS signal.
+ - fsl,data-width : should be <18> or <24>
+
+example:
+
+gpr: iomuxc-gpr@53fa8000 {
+	/* ... */
+};
+
+ldb: ldb@53fa8008 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx53-ldb";
+	gpr = <&gpr>;
+	clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+		 <&clks IMX5_CLK_LDB_DI1_SEL>,
+		 <&clks IMX5_CLK_IPU_DI0_SEL>,
+		 <&clks IMX5_CLK_IPU_DI1_SEL>,
+		 <&clks IMX5_CLK_LDB_DI0_GATE>,
+		 <&clks IMX5_CLK_LDB_DI1_GATE>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	/* Using an of-graph endpoint link to connect the panel */
+	lvds-channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu_di0_lvds0>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	/* Using display-timings and fsl,data-mapping/width instead */
+	lvds-channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lvds1_in: endpoint {
+				remote-endpoint = <&ipu_di1_lvds1>;
+			};
+		};
+	};
+};
+
+panel: lvds-panel {
+	/* ... */
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds0_out>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
new file mode 100644
index 0000000000..4ae6328cde
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: iMX8MQ Display Controller Subsystem (DCSS)
+
+maintainers:
+  - Laurentiu Palcu <laurentiu.palcu@nxp.com>
+
+description:
+
+  The DCSS (display controller sub system) is used to source up to three
+  display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
+  2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
+  image processing capabilities are included to provide a solution capable of
+  driving next generation high dynamic range displays.
+
+properties:
+  compatible:
+    const: nxp,imx8mq-dcss
+
+  reg:
+    items:
+      - description: DCSS base address and size, up to IRQ steer start
+      - description: DCSS BLKCTL base address and size
+
+  interrupts:
+    items:
+      - description: Context loader completion and error interrupt
+      - description: DTG interrupt used to signal context loader trigger time
+      - description: DTG interrupt for Vblank
+
+  interrupt-names:
+    items:
+      - const: ctxld
+      - const: ctxld_kick
+      - const: vblank
+
+  clocks:
+    items:
+      - description: Display APB clock for all peripheral PIO access interfaces
+      - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
+      - description: RTRAM clock
+      - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
+      - description: DTRC clock, needed by video decompressor
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: rtrm
+      - const: pix
+      - const: dtrc
+
+  assigned-clocks:
+    items:
+      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
+      - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
+      - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
+                     IMX8MQ_VIDEO_PLL1_REF_SEL
+
+  assigned-clock-parents:
+    items:
+      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+      - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+      - description: Phandle and clock specifier of IMX8MQ_CLK_27M
+
+  assigned-clock-rates:
+    items:
+      - description: Must be 800 MHz
+      - description: Must be 400 MHz
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    dcss: display-controller@32e00000 {
+        compatible = "nxp,imx8mq-dcss";
+        reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
+        interrupts = <6>, <8>, <9>;
+        interrupt-names = "ctxld", "ctxld_kick", "vblank";
+        interrupt-parent = <&irqsteer>;
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
+                 <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>,
+                 <&clk IMX8MQ_CLK_DISP_DTRC>;
+        clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
+        assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>,
+                          <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>,
+                                 <&clk IMX8MQ_CLK_27M>;
+        assigned-clock-rates = <800000000>,
+                               <400000000>;
+        port {
+            dcss_out: endpoint {
+                remote-endpoint = <&hdmi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
new file mode 100644
index 0000000000..319bd7c88f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ingenic,ipu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Image Processing Unit (IPU)
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4725b-ipu
+          - ingenic,jz4760-ipu
+      - items:
+          - const: ingenic,jz4770-ipu
+          - const: ingenic,jz4760-ipu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipu
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    ipu@13080000 {
+      compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu";
+      reg = <0x13080000 0x800>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <29>;
+
+      clocks = <&cgu JZ4770_CLK_IPU>;
+      clock-names = "ipu";
+
+      port {
+        ipu_ep: endpoint {
+          remote-endpoint = <&lcdc_ep>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
new file mode 100644
index 0000000000..6d4c00f3fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs LCD controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: "^lcd-controller@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ingenic,jz4740-lcd
+      - ingenic,jz4725b-lcd
+      - ingenic,jz4760-lcd
+      - ingenic,jz4760b-lcd
+      - ingenic,jz4770-lcd
+      - ingenic,jz4780-lcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel clock
+      - description: Module clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lcd_pclk
+      - const: lcd
+    minItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPI output, to interface with TFT panels.
+
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the Image Processing Unit (IPU).
+          (See ingenic,ipu.yaml).
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-lcd
+          - ingenic,jz4780-lcd
+then:
+  properties:
+    clocks:
+      minItems: 2
+    clock-names:
+      minItems: 2
+else:
+  properties:
+    clocks:
+      maxItems: 1
+    clock-names:
+      maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    lcd-controller@13050000 {
+      compatible = "ingenic,jz4740-lcd";
+      reg = <0x13050000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <30>;
+
+      clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+      clock-names = "lcd_pclk", "lcd";
+
+      port {
+        endpoint {
+          remote-endpoint = <&panel_input>;
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
+    lcd-controller@13050000 {
+      compatible = "ingenic,jz4725b-lcd";
+      reg = <0x13050000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <31>;
+
+      clocks = <&cgu JZ4725B_CLK_LCD>;
+      clock-names = "lcd_pclk";
+
+      port {
+        endpoint {
+          remote-endpoint = <&panel_input>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
new file mode 100644
index 0000000000..2cf54ecc70
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay display controller
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-display
+
+  reg:
+    items:
+      - description: LCD registers range
+
+  reg-names:
+    items:
+      - const: lcd
+
+  clocks:
+    items:
+      - description: LCD controller clock
+      - description: pll0 clock
+
+  clock-names:
+    items:
+      - const: clk_lcd
+      - const: clk_pll0
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Display output node to DSI.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@20930000 {
+        compatible = "intel,keembay-display";
+        reg = <0x20930000 0x3000>;
+        reg-names = "lcd";
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scmi_clk 0x83>,
+                 <&scmi_clk 0x0>;
+        clock-names = "clk_lcd", "clk_pll0";
+
+        port {
+            disp_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
new file mode 100644
index 0000000000..cc7e1f318f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay MSSCAM
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+description: |
+   MSSCAM controls local clocks in the display subsystem namely LCD clocks and
+   MIPI DSI clocks. It also configures the interconnect between LCD and
+   MIPI DSI.
+
+properties:
+  compatible:
+    items:
+      - const: intel,keembay-msscam
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    const: 4
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    msscam:msscam@20910000 {
+        compatible = "intel,keembay-msscam", "syscon";
+        reg = <0x20910000 0x30>;
+        reg-io-width = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/display/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml
new file mode 100644
index 0000000000..7cd2ce7e9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/lvds.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Display Common Properties
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS devices. This bindings supports devices compatible with the following
+  specifications.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Device compatible with those specifications have been marketed under the
+  FPD-Link and FlatLink brands.
+
+properties:
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+      - vesa-24
+    description: |
+      The color signals mapping order.
+
+      LVDS data mappings are defined as follows.
+
+      - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
+        [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+
+      - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
+        specifications. Data are transferred as follows on 4 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
+      DATA1     ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
+      DATA3     ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+      - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
+        Data are transferred as follows on 4 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+      DATA3     ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+
+      Control signals are mapped as follows.
+
+      CTL0: HSync
+      CTL1: VSync
+      CTL2: Data Enable
+      CTL3: 0
+
+  data-mirror:
+    type: boolean
+    description:
+      If set, reverse the bit order described in the data mappings below on all
+      data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
new file mode 100644
index 0000000000..45ffd6c417
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
@@ -0,0 +1,36 @@
+PXA LCD Controller
+------------------
+
+Required properties:
+ - compatible : one of these
+	"marvell,pxa2xx-lcdc",
+	"marvell,pxa270-lcdc",
+	"marvell,pxa300-lcdc"
+ - reg : should contain 1 register range (address and length).
+ - interrupts : framebuffer controller interrupt.
+ - clocks: phandle to input clocks
+
+Optional properties:
+ - lcd-supply: A phandle to a power regulator that controls the LCD voltage.
+
+Required nodes:
+ - port: connection to the LCD panel (see video-interfaces.txt)
+	 This node must have its properties bus-width and remote-endpoint set.
+	 If the panel is not a TFT color panel, then a "lcd-type" property in
+	 the panel should specify the panel type.
+	 This panel node should be in the board dts.
+
+Example:
+	lcd-controller@40500000 {
+		compatible = "marvell,pxa2xx-lcdc";
+		reg = <0x44000000 0x10000>;
+		interrupts = <17>;
+		clocks = <&clks CLK_LCD>;
+
+		port {
+			lcdc_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				bus-width = <16>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/marvell,pxa300-gcu.txt b/Documentation/devicetree/bindings/display/marvell,pxa300-gcu.txt
new file mode 100644
index 0000000000..9cfae5c4e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/marvell,pxa300-gcu.txt
@@ -0,0 +1,17 @@
+PXA3xx GCU Controller
+---------------------
+
+Required properties:
+ - compatible : "marvell,pxa300-gcu"
+ - reg : should contain the register range (address and length).
+ - interrupts : Controller interrupt.
+ - clocks: phandle to the PXA specific input clock.
+
+Example for PXA300:
+
+	display-controller@54000000 {
+		compatible = "marvell,pxa300-gcu";
+		reg = <0x54000000 0x1000>;
+		interrupts = <39>;
+		clocks = <&clks CLK_PXA300_GCU>;
+	};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
new file mode 100644
index 0000000000..7fd42c8fdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display adaptive ambient light processor, namely AAL,
+  is responsible for backlight power saving and sunlight visibility improving.
+  AAL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-aal
+          - mediatek,mt8183-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt2712-disp-aal
+              - mediatek,mt6795-disp-aal
+          - const: mediatek,mt8173-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-aal
+              - mediatek,mt8188-disp-aal
+              - mediatek,mt8192-disp-aal
+              - mediatek,mt8195-disp-aal
+          - const: mediatek,mt8183-disp-aal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: AAL Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aal@14015000 {
+           compatible = "mediatek,mt8173-disp-aal";
+           reg = <0 0x14015000 0 0x1000>;
+           interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+           clocks = <&mmsys CLK_MM_DISP_AAL>;
+           mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 0000000000..8c2a737237
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color correction, namely CCORR, reproduces correct color
+  on panels with different color gamut.
+  CCORR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-ccorr
+          - mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ccorr
+              - mediatek,mt8188-disp-ccorr
+              - mediatek,mt8195-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: CCORR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ccorr0: ccorr@1400f000 {
+            compatible = "mediatek,mt8183-disp-ccorr";
+            reg = <0 0x1400f000 0 0x1000>;
+            interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
new file mode 100644
index 0000000000..080cf32120
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI CEC Controller
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The HDMI CEC controller handles hotplug detection and CEC communication.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7623-cec
+      - mediatek,mt8167-cec
+      - mediatek,mt8173-cec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    cec: cec@10013000 {
+        compatible = "mediatek,mt8173-cec";
+        reg = <0x10013000 0xbc>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&infracfg CLK_INFRA_CEC>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
new file mode 100644
index 0000000000..f21e440920
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color processor, namely COLOR, provides hue, luma and
+  saturation adjustments to get better picture quality and to have one panel
+  resemble the other in their output characteristics.
+  COLOR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-color
+          - mediatek,mt8167-disp-color
+          - mediatek,mt8173-disp-color
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-color
+              - mediatek,mt2712-disp-color
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-color
+              - mediatek,mt8183-disp-color
+              - mediatek,mt8186-disp-color
+              - mediatek,mt8188-disp-color
+              - mediatek,mt8192-disp-color
+              - mediatek,mt8195-disp-color
+          - const: mediatek,mt8173-disp-color
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: COLOR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        color0: color@14013000 {
+            compatible = "mediatek,mt8173-disp-color";
+            reg = <0 0x14013000 0 0x1000>;
+            interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
new file mode 100644
index 0000000000..1588b3f7ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display dither processor, namely DITHER, works by approximating
+  unavailable colors with available colors and by mixing and matching available
+  colors to mimic unavailable ones.
+  DITHER device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-dither
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-dither
+              - mediatek,mt8188-disp-dither
+              - mediatek,mt8192-disp-dither
+              - mediatek,mt8195-disp-dither
+          - const: mediatek,mt8183-disp-dither
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: DITHER Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dither0: dither@14012000 {
+            compatible = "mediatek,mt8183-disp-dither";
+            reg = <0 0x14012000 0 0x1000>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 0000000000..ff781f2174
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  MediaTek DP and eDP are different hardwares and there are some features
+  which are not supported for eDP. For example, audio is not supported for
+  eDP. Therefore, we need to use two different compatibles to describe them.
+  In addition, We just need to enable the power domain of DP, so the clock
+  of DP is generated by itself and we are not using other PLL to generate
+  clocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-dp-tx
+      - mediatek,mt8195-edp-tx
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: efuse data for display port calibration
+
+  nvmem-cell-names:
+    const: dp_calibration_data
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller, usually dp_intf
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                description: |
+                  number of lanes supported by the hardware.
+                  The possible values:
+                  0       - For 1 lane enabled in IP.
+                  0 1     - For 2 lanes enabled in IP.
+                  0 1 2 3 - For 4 lanes enabled in IP.
+                minItems: 1
+                maxItems: 4
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+  max-linkrate-mhz:
+    enum: [ 1620, 2700, 5400, 8100 ]
+    description: maximum link rate supported by the hardware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+  - max-linkrate-mhz
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    dptx@1c600000 {
+        compatible = "mediatek,mt8195-dp-tx";
+        reg = <0x1c600000 0x8000>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+        max-linkrate-mhz = <8100>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dptx_in: endpoint {
+                    remote-endpoint = <&dp_intf0_out>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                dptx_out: endpoint {
+                    data-lanes = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
new file mode 100644
index 0000000000..803c00f262
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DPI and DP_INTF Controller
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The MediaTek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-dpi
+          - mediatek,mt7623-dpi
+          - mediatek,mt8173-dpi
+          - mediatek,mt8183-dpi
+          - mediatek,mt8186-dpi
+          - mediatek,mt8188-dp-intf
+          - mediatek,mt8192-dpi
+          - mediatek,mt8195-dp-intf
+      - items:
+          - enum:
+              - mediatek,mt6795-dpi
+          - const: mediatek,mt8183-dpi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel Clock
+      - description: Engine Clock
+      - description: DPI PLL
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: engine
+      - const: pll
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: sleep
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input port of an
+      attached HDMI, LVDS or DisplayPort encoder chip.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    dpi0: dpi@1401d000 {
+        compatible = "mediatek,mt8173-dpi";
+        reg = <0x1401d000 0x1000>;
+        interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+             <&mmsys CLK_MM_DPI_ENGINE>,
+             <&apmixedsys CLK_APMIXED_TVDPLL>;
+        clock-names = "pixel", "engine", "pll";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&dpi_pin_func>;
+        pinctrl-1 = <&dpi_pin_idle>;
+
+        port {
+            dpi0_out: endpoint {
+                remote-endpoint = <&hdmi0_in>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
new file mode 100644
index 0000000000..2cbdd9ee44
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mediatek display DSC controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The DSC standard is a specification of the algorithms used for
+  compressing and decompressing image display streams, including
+  the specification of the syntax and semantics of the compressed
+  video bit stream. DSC is designed for real-time systems with
+  real-time compression, transmission, decompression and Display.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-disp-dsc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DSC Wrapper Clock
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsc0: disp_dsc_wrap@1c009000 {
+            compatible = "mediatek,mt8195-disp-dsc";
+            reg = <0 0x1c009000 0 0x1000>;
+            interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+            clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+            mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
new file mode 100644
index 0000000000..12441b9376
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+description: |
+  The MediaTek DSI function block is a sink of the display subsystem and can
+  drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+  channel output.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-dsi
+          - mediatek,mt7623-dsi
+          - mediatek,mt8167-dsi
+          - mediatek,mt8173-dsi
+          - mediatek,mt8183-dsi
+          - mediatek,mt8186-dsi
+      - items:
+          - enum:
+              - mediatek,mt6795-dsi
+          - const: mediatek,mt8173-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Engine Clock
+      - description: Digital Clock
+      - description: HS Clock
+
+  clock-names:
+    items:
+      - const: engine
+      - const: digital
+      - const: hs
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input
+      port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/mt8183-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi0: dsi@14014000 {
+            compatible = "mediatek,mt8183-dsi";
+            reg = <0 0x14014000 0 0x1000>;
+            interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DSI0_MM>,
+                <&mmsys CLK_MM_DSI0_IF>,
+                <&mipi_tx0>;
+            clock-names = "engine", "digital", "hs";
+            resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+            phys = <&mipi_tx0>;
+            phy-names = "dphy";
+            port {
+                dsi0_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
new file mode 100644
index 0000000000..801fa66ae6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethdr Device
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is
+  designed for HDR video and graphics conversion in the external display path.
+  It handles multiple HDR input types and performs tone mapping, color
+  space/color format conversion, and then combine different layers,
+  output the required HDR or SDR signal to the subsequent display path.
+  This engine is composed of two video frontends, two graphic frontends,
+  one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL.
+  These two function blocks read the pre-programmed registers from DRAM and
+  set them to HW in the v-blanking period.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-disp-ethdr
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: mixer
+      - const: vdo_fe0
+      - const: vdo_fe1
+      - const: gfx_fe0
+      - const: gfx_fe1
+      - const: vdo_be
+      - const: adl_ds
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: mixer clock
+      - description: video frontend 0 clock
+      - description: video frontend 1 clock
+      - description: graphic frontend 0 clock
+      - description: graphic frontend 1 clock
+      - description: video backend clock
+      - description: autodownload and menuload clock
+      - description: video frontend 0 async clock
+      - description: video frontend 1 async clock
+      - description: graphic frontend 0 async clock
+      - description: graphic frontend 1 async clock
+      - description: video backend async clock
+      - description: ethdr top clock
+
+  clock-names:
+    items:
+      - const: mixer
+      - const: vdo_fe0
+      - const: vdo_fe1
+      - const: gfx_fe0
+      - const: gfx_fe1
+      - const: vdo_be
+      - const: adl_ds
+      - const: vdo_fe0_async
+      - const: vdo_fe1_async
+      - const: gfx_fe0_async
+      - const: gfx_fe1_async
+      - const: vdo_be_async
+      - const: ethdr_top
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: video frontend 0 async reset
+      - description: video frontend 1 async reset
+      - description: graphic frontend 0 async reset
+      - description: graphic frontend 1 async reset
+      - description: video backend async reset
+
+  reset-names:
+    items:
+      - const: vdo_fe0_async
+      - const: vdo_fe1_async
+      - const: gfx_fe0_async
+      - const: gfx_fe1_async
+      - const: vdo_be_async
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 7
+    description: The register of display function block to be set by gce.
+      There are 4 arguments in this property, gce node, subsys id, offset and
+      register size. The subsys id is defined in the gce header of each chips
+      include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
+      function block.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - resets
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/reset/mt8195-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        hdr-engine@1c114000 {
+                compatible = "mediatek,mt8195-disp-ethdr";
+                reg = <0 0x1c114000 0 0x1000>,
+                      <0 0x1c115000 0 0x1000>,
+                      <0 0x1c117000 0 0x1000>,
+                      <0 0x1c119000 0 0x1000>,
+                      <0 0x1c11a000 0 0x1000>,
+                      <0 0x1c11b000 0 0x1000>,
+                      <0 0x1c11c000 0 0x1000>;
+                reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                            "vdo_be", "adl_ds";
+                mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+                clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+                         <&vdosys1 CLK_VDO1_26M_SLOW>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+                         <&topckgen CLK_TOP_ETHDR>;
+                clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                              "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+                              "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+                              "ethdr_top";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+                iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+                         <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+                interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+                resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+                reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+                              "gfx_fe1_async", "vdo_be_async";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
new file mode 100644
index 0000000000..c6641acd75
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+  operation used to adjust luminance in display system.
+  GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-gamma
+          - mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-gamma
+          - const: mediatek,mt8173-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-gamma
+              - mediatek,mt8188-disp-gamma
+              - mediatek,mt8192-disp-gamma
+              - mediatek,mt8195-disp-gamma
+          - const: mediatek,mt8183-disp-gamma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: GAMMA Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gamma@14016000 {
+            compatible = "mediatek,mt8173-disp-gamma";
+            reg = <0 0x14016000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
new file mode 100644
index 0000000000..bd8f7b8ae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI DDC
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7623-hdmi-ddc
+      - mediatek,mt8167-hdmi-ddc
+      - mediatek,mt8173-hdmi-ddc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ddc-i2c
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    hdmi_ddc0: i2c@11012000 {
+        compatible = "mediatek,mt8173-hdmi-ddc";
+        reg = <0x11012000 0x1c>;
+        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_I2C5>;
+        clock-names = "ddc-i2c";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
new file mode 100644
index 0000000000..b90b6d18a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI Encoder
+
+maintainers:
+  - CK Hu <ck.hu@mediatek.com>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
+  its parallel input.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-hdmi
+      - mediatek,mt7623-hdmi
+      - mediatek,mt8167-hdmi
+      - mediatek,mt8173-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Pixel Clock
+      - description: HDMI PLL
+      - description: Bit Clock
+      - description: S/PDIF Clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: pll
+      - const: bclk
+      - const: spdif
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: hdmi
+
+  mediatek,syscon-hdmi:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to system configuration registers
+          - description: register offset in the system configuration registers
+    description: |
+      phandle link and register offset to the system configuration registers.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input port node. This port should be connected to a DPI output port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output port node. This port should be connected to the input port of a connector
+          node that contains a ddc-i2c-bus property, or to the  input port of an attached
+          bridge chip, such as a SlimPort transmitter.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - mediatek,syscon-hdmi
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    hdmi0: hdmi@14025000 {
+        compatible = "mediatek,mt8173-hdmi";
+        reg = <0x14025000 0x400>;
+        interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+             <&mmsys CLK_MM_HDMI_PLLCK>,
+             <&mmsys CLK_MM_HDMI_AUDIO>,
+             <&mmsys CLK_MM_HDMI_SPDIF>;
+        clock-names = "pixel", "pll", "bclk", "spdif";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pin>;
+        phys = <&hdmi_phy>;
+        phy-names = "hdmi";
+        mediatek,syscon-hdmi = <&mmsys 0x900>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi0_in: endpoint {
+              remote-endpoint = <&dpi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            hdmi0_out: endpoint {
+              remote-endpoint = <&hdmi_con_in>;
+            };
+          };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 0000000000..dd12e2ff68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MDP RDMA
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  The MediaTek MDP RDMA stands for Read Direct Memory Access.
+  It provides real time data to the back-end panel driver, such as DSI,
+  DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-vdo1-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - iommus
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma@1c104000 {
+            compatible = "mediatek,mt8195-vdo1-rdma";
+            reg = <0 0x1c104000 0 0x1000>;
+            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
new file mode 100644
index 0000000000..eead5cb863
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+  inputs into one side-by-side output.
+  MERGE device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-merge
+          - mediatek,mt8195-disp-merge
+      - items:
+          - const: mediatek,mt6795-disp-merge
+          - const: mediatek,mt8173-disp-merge
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: merge
+      - items:
+          - const: merge
+          - const: merge_async
+
+  mediatek,merge-fifo-en:
+    description:
+      The setting of merge fifo is mainly provided for the display latency
+      buffer to ensure that the back-end panel display data will not be
+      underrun, a little more data is needed in the fifo.
+      According to the merge fifo settings, when the water level is detected
+      to be insufficient, it will trigger RDMA sending ultra and preulra
+      command to SMI to speed up the data rate.
+    type: boolean
+
+  mediatek,merge-mute:
+    description: Support mute function. Mute the content of merge output.
+    type: boolean
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  resets:
+    description: reset controller
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        merge@14017000 {
+            compatible = "mediatek,mt8173-disp-merge";
+            reg = <0 0x14017000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_MERGE>;
+            clock-names = "merge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
new file mode 100644
index 0000000000..831c653caf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overdirve
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overdrive, namely OD, increases the transition values
+  of pixels between consecutive frames to make LCD rotate faster.
+  OD device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2712-disp-od
+          - mediatek,mt8173-disp-od
+      - items:
+          - const: mediatek,mt6795-disp-od
+          - const: mediatek,mt8173-disp-od
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: OD Clock
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        od@14023000 {
+            compatible = "mediatek,mt8173-disp-od";
+            reg = <0 0x14023000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_DISP_OD>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
new file mode 100644
index 0000000000..c7dd0ef02d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+  for OVL.
+  OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-ovl-2l
+          - mediatek,mt8192-disp-ovl-2l
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl-2l
+          - const: mediatek,mt8192-disp-ovl-2l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL-2L Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl_2l0: ovl@14009000 {
+            compatible = "mediatek,mt8183-disp-ovl-2l";
+            reg = <0 0x14009000 0 0x1000>;
+            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+            iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
new file mode 100644
index 0000000000..3e1069b00b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay, namely OVL, can do alpha blending from
+  the memory.
+  OVL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-ovl
+          - mediatek,mt8173-disp-ovl
+          - mediatek,mt8183-disp-ovl
+          - mediatek,mt8192-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-ovl
+              - mediatek,mt2712-disp-ovl
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-ovl
+          - const: mediatek,mt8173-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-ovl
+              - mediatek,mt8195-disp-ovl
+          - const: mediatek,mt8183-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl
+          - const: mediatek,mt8192-disp-ovl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl0: ovl@1400c000 {
+            compatible = "mediatek,mt8173-disp-ovl";
+            reg = <0 0x1400c000 0 0x1000>;
+            interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0>;
+            iommus = <&iommu M4U_PORT_DISP_OVL0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
new file mode 100644
index 0000000000..11fe32e50a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display postmask
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display postmask, namely POSTMASK, provides round corner pattern
+  generation.
+  POSTMASK device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8192-disp-postmask
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-postmask
+              - mediatek,mt8188-disp-postmask
+          - const: mediatek,mt8192-disp-postmask
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: POSTMASK Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/gce/mt8192-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        postmask0: postmask@1400d000 {
+            compatible = "mediatek,mt8192-disp-postmask";
+            reg = <0 0x1400d000 0 0x1000>;
+            interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
new file mode 100644
index 0000000000..39dbb5c8bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Read Direct Memory Access(RDMA) component used to read the
+  data into DMA. It provides real time data to the back-end panel
+  driver, such as DSI, DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-rdma
+          - mediatek,mt8173-disp-rdma
+          - mediatek,mt8183-disp-rdma
+          - mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-rdma
+          - const: mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-rdma
+              - mediatek,mt2712-disp-rdma
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-rdma
+          - const: mediatek,mt8173-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-rdma
+              - mediatek,mt8192-disp-rdma
+          - const: mediatek,mt8183-disp-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,rdma-fifo-size:
+    description:
+      rdma fifo size may be different even in same SOC, add this property to the
+      corresponding rdma.
+      The value below is the Max value which defined in hardware data sheet
+      mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+      mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+      mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8192, 5120, 2048]
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma0: rdma@1400e000 {
+            compatible = "mediatek,mt8173-disp-rdma";
+            reg = <0 0x1400e000 0 0x1000>;
+            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+            mediatek,rdma-fifo-size = <8192>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
new file mode 100644
index 0000000000..a8a5c96085
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display split
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display split, namely SPLIT, is used to split stream to two
+  encoders.
+  SPLIT device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-split
+      - items:
+          - const: mediatek,mt6795-disp-split
+          - const: mediatek,mt8173-disp-split
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: SPLIT Clock
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        split0: split@14018000 {
+            compatible = "mediatek,mt8173-disp-split";
+            reg = <0 0x14018000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
new file mode 100644
index 0000000000..39e3e2d4a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display UFOe
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display UFOe stands for Unified Frame Optimization engine.
+  UFOe can cut the data rate for DSI port which may lead to reduce power
+  consumption.
+  UFOe device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-ufoe
+      - items:
+          - const: mediatek,mt6795-disp-ufoe
+          - const: mediatek,mt8173-disp-ufoe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: UFOe Clock
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufoe@1401a000 {
+            compatible = "mediatek,mt8173-disp-ufoe";
+            reg = <0 0x1401a000 0 0x1000>;
+            interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_UFOE>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
new file mode 100644
index 0000000000..a3a2b71a45
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+  WDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-wdma
+      - items:
+          - const: mediatek,mt6795-disp-wdma
+          - const: mediatek,mt8173-disp-wdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: WDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdma0: wdma@14011000 {
+            compatible = "mediatek,mt8173-disp-wdma";
+            reg = <0 0x14011000 0 0x1000>;
+            interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
new file mode 100644
index 0000000000..a336599f6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
@@ -0,0 +1,235 @@
+MIPI DSI (Display Serial Interface) busses
+==========================================
+
+The MIPI Display Serial Interface specifies a serial bus and a protocol for
+communication between a host and up to four peripherals. This document will
+define the syntax used to represent a DSI bus in a device tree.
+
+This document describes DSI bus-specific properties only or defines existing
+standard properties in the context of the DSI bus.
+
+Each DSI host provides a DSI bus. The DSI host controller's node contains a
+set of properties that characterize the bus. Child nodes describe individual
+peripherals on that bus.
+
+The following assumes that only a single peripheral is connected to a DSI
+host. Experience shows that this is true for the large majority of setups.
+
+DSI host
+========
+
+In addition to the standard properties and those defined by the parent bus of
+a DSI host, the following properties apply to a node representing a DSI host.
+
+Required properties:
+- #address-cells: The number of cells required to represent an address on the
+  bus. DSI peripherals are addressed using a 2-bit virtual channel number, so
+  a maximum of 4 devices can be addressed on a single bus. Hence the value of
+  this property should be 1.
+- #size-cells: Should be 0. There are cases where it makes sense to use a
+  different value here. See below.
+
+Optional properties:
+- clock-master: boolean. Should be enabled if the host is being used in
+  conjunction with another DSI host to drive the same peripheral. Hardware
+  supporting such a configuration generally requires the data on both the busses
+  to be driven by the same clock. Only the DSI host instance controlling this
+  clock should contain this property.
+
+DSI peripheral
+==============
+
+Peripherals with DSI as control bus, or no control bus
+------------------------------------------------------
+
+Peripherals with the DSI bus as the primary control bus, or peripherals with
+no control bus but use the DSI bus to transmit pixel data are represented
+as child nodes of the DSI host's node. Properties described here apply to all
+DSI peripherals, but individual bindings may want to define additional,
+device-specific properties.
+
+Required properties:
+- reg: The virtual channel number of a DSI peripheral. Must be in the range
+  from 0 to 3.
+
+Some DSI peripherals respond to more than a single virtual channel. In that
+case two alternative representations can be chosen:
+- The reg property can take multiple entries, one for each virtual channel
+  that the peripheral responds to.
+- If the virtual channels that a peripheral responds to are consecutive, the
+  #size-cells can be set to 1. The first cell of each entry in the reg
+  property is the number of the first virtual channel and the second cell is
+  the number of consecutive virtual channels.
+
+Peripherals with a different control bus
+----------------------------------------
+
+There are peripherals that have I2C/SPI (or some other non-DSI bus) as the
+primary control bus, but are also connected to a DSI bus (mostly for the data
+path). Connections between such peripherals and a DSI host can be represented
+using the graph bindings [1], [2].
+
+Peripherals that support dual channel DSI
+-----------------------------------------
+
+Peripherals with higher bandwidth requirements can be connected to 2 DSI
+busses. Each DSI bus/channel drives some portion of the pixel data (generally
+left/right half of each line of the display, or even/odd lines of the display).
+The graph bindings should be used to represent the multiple DSI busses that are
+connected to this peripheral. Each DSI host's output endpoint can be linked to
+an input endpoint of the DSI peripheral.
+
+[1] Documentation/devicetree/bindings/graph.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Examples
+========
+- (1), (2) and (3) are examples of a DSI host and peripheral on the DSI bus
+  with different virtual channel configurations.
+- (4) is an example of a peripheral on a I2C control bus connected to a
+  DSI host using of-graph bindings.
+- (5) is an example of 2 DSI hosts driving a dual-channel DSI peripheral,
+  which uses I2C as its primary control bus.
+
+1)
+	dsi-host {
+		...
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* peripheral responds to virtual channel 0 */
+		peripheral@0 {
+			compatible = "...";
+			reg = <0>;
+		};
+
+		...
+	};
+
+2)
+	dsi-host {
+		...
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* peripheral responds to virtual channels 0 and 2 */
+		peripheral@0 {
+			compatible = "...";
+			reg = <0, 2>;
+		};
+
+		...
+	};
+
+3)
+	dsi-host {
+		...
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* peripheral responds to virtual channels 1, 2 and 3 */
+		peripheral@1 {
+			compatible = "...";
+			reg = <1 3>;
+		};
+
+		...
+	};
+
+4)
+	i2c-host {
+		...
+
+		dsi-bridge@35 {
+			compatible = "...";
+			reg = <0x35>;
+
+			ports {
+				...
+
+				port {
+					bridge_mipi_in: endpoint {
+						remote-endpoint = <&host_mipi_out>;
+					};
+				};
+			};
+		};
+	};
+
+	dsi-host {
+		...
+
+		ports {
+			...
+
+			port {
+				host_mipi_out: endpoint {
+					remote-endpoint = <&bridge_mipi_in>;
+				};
+			};
+		};
+	};
+
+5)
+	i2c-host {
+		dsi-bridge@35 {
+			compatible = "...";
+			reg = <0x35>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi1_in: endpoint {
+						remote-endpoint = <&dsi1_out>;
+					};
+				};
+			};
+		};
+	};
+
+	dsi0-host {
+		...
+
+		/*
+		 * this DSI instance drives the clock for both the host
+		 * controllers
+		 */
+		clock-master;
+
+		ports {
+			...
+
+			port {
+				dsi0_out: endpoint {
+					remote-endpoint = <&dsi0_in>;
+				};
+			};
+		};
+	};
+
+	dsi1-host {
+		...
+
+		ports {
+			...
+
+			port {
+				dsi1_out: endpoint {
+					remote-endpoint = <&dsi1_in>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
new file mode 100644
index 0000000000..f12558960c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSM Display Port Controller
+
+maintainers:
+  - Kuogee Hsieh <quic_khsieh@quicinc.com>
+
+description: |
+  Device tree bindings for DisplayPort host controller for MSM targets
+  that are compatible with VESA DisplayPort interface specification.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sc7180-dp
+          - qcom,sc7280-dp
+          - qcom,sc7280-edp
+          - qcom,sc8180x-dp
+          - qcom,sc8180x-edp
+          - qcom,sc8280xp-dp
+          - qcom,sc8280xp-edp
+          - qcom,sdm845-dp
+          - qcom,sm8350-dp
+      - items:
+          - enum:
+              - qcom,sm8250-dp
+              - qcom,sm8450-dp
+              - qcom,sm8550-dp
+          - const: qcom,sm8350-dp
+
+  reg:
+    minItems: 4
+    items:
+      - description: ahb register block
+      - description: aux register block
+      - description: link register block
+      - description: p0 register block
+      - description: p1 register block
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHB clock to enable register access
+      - description: Display Port AUX clock
+      - description: Display Port Link clock
+      - description: Link interface clock between DP and PHY
+      - description: Display Port Pixel clock
+
+  clock-names:
+    items:
+      - const: core_iface
+      - const: core_aux
+      - const: ctrl_link
+      - const: ctrl_link_iface
+      - const: stream_pixel
+
+  assigned-clocks:
+    items:
+      - description: link clock source
+      - description: pixel clock source
+
+  assigned-clock-parents:
+    items:
+      - description: phy 0 parent
+      - description: phy 1 parent
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dp
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 3
+
+  "#sound-dai-cells":
+    const: 0
+
+  vdda-0p9-supply:
+    deprecated: true
+  vdda-1p2-supply:
+    deprecated: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+              link-frequencies:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - power-domains
+  - ports
+
+allOf:
+  # AUX BUS does not exist on DP controllers
+  # Audio output also is present only on DP output
+  # p1 regions is present on DP, but not on eDP
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-edp
+              - qcom,sc8180x-edp
+              - qcom,sc8280xp-edp
+    then:
+      properties:
+        "#sound-dai-cells": false
+    else:
+      properties:
+        aux-bus: false
+        reg:
+          minItems: 5
+      required:
+        - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    displayport-controller@ae90000 {
+        compatible = "qcom,sc7180-dp";
+        reg = <0xae90000 0x200>,
+              <0xae90200 0x200>,
+              <0xae90400 0xc00>,
+              <0xae91000 0x400>,
+              <0xae91400 0x400>;
+        interrupt-parent = <&mdss>;
+        interrupts = <12>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+        clock-names = "core_iface", "core_aux",
+                      "ctrl_link",
+                      "ctrl_link_iface", "stream_pixel";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                          <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+
+        assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+
+        phys = <&dp_phy>;
+        phy-names = "dp";
+
+        #sound-dai-cells = <0>;
+
+        power-domains = <&rpmhpd SC7180_CX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dpu_intf0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&typec>;
+                    data-lanes = <0 1>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 0000000000..3f953aa5e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,56 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description: |
+  Common properties for QCom DPU display controller.
+
+# Do not select this by default, otherwise it is also selected for all
+# display-controller@ nodes
+select:
+  false
+
+properties:
+  $nodename:
+    pattern: '^display-controller@[0-9a-f]+$'
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc.
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - interrupts
+  - power-domains
+  - operating-points-v2
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
new file mode 100644
index 0000000000..c6dbab65d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -0,0 +1,454 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI controller
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,apq8064-dsi-ctrl
+              - qcom,msm8226-dsi-ctrl
+              - qcom,msm8916-dsi-ctrl
+              - qcom,msm8953-dsi-ctrl
+              - qcom,msm8974-dsi-ctrl
+              - qcom,msm8996-dsi-ctrl
+              - qcom,msm8998-dsi-ctrl
+              - qcom,qcm2290-dsi-ctrl
+              - qcom,sc7180-dsi-ctrl
+              - qcom,sc7280-dsi-ctrl
+              - qcom,sdm660-dsi-ctrl
+              - qcom,sdm845-dsi-ctrl
+              - qcom,sm6115-dsi-ctrl
+              - qcom,sm6125-dsi-ctrl
+              - qcom,sm6350-dsi-ctrl
+              - qcom,sm6375-dsi-ctrl
+              - qcom,sm8150-dsi-ctrl
+              - qcom,sm8250-dsi-ctrl
+              - qcom,sm8350-dsi-ctrl
+              - qcom,sm8450-dsi-ctrl
+              - qcom,sm8550-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,mdss-dsi-ctrl # This should always come with an SoC-specific compatible
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: dsi_ctrl
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - bus:: Display AHB clock.
+       - byte:: Display byte clock.
+       - byte_intf:: Display byte interface clock.
+       - core:: Display core clock.
+       - core_mss:: Core MultiMedia SubSystem clock.
+       - iface:: Display AXI clock.
+       - mdp_core:: MDP Core clock.
+       - mnoc:: MNOC clock
+       - pixel:: Display pixel clock.
+    minItems: 3
+    maxItems: 9
+
+  clock-names:
+    minItems: 3
+    maxItems: 9
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    deprecated: true
+    const: dsi
+
+  syscon-sfpb:
+    description: A phandle to mmss_sfpb syscon node (only for DSIv2).
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  qcom,dual-dsi-mode:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is driving a panel which needs
+      2 DSI links.
+
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
+  assigned-clocks:
+    minItems: 2
+    maxItems: 4
+    description: |
+      Parents of "byte" and "pixel" for the given platform.
+      For DSIv2 platforms this should contain "byte", "esc", "src" and
+      "pixel_src" clocks.
+
+  assigned-clock-parents:
+    minItems: 2
+    maxItems: 4
+    description: |
+      The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains DSI controller input and output ports as children, each
+      containing one endpoint subnode.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          Input endpoints of the controller.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                maxItems: 4
+                minItems: 1
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          Output endpoints of the controller.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                maxItems: 4
+                minItems: 1
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+    required:
+      - port@0
+      - port@1
+
+  avdd-supply:
+    description:
+      Phandle to vdd regulator device node
+
+  refgen-supply:
+    description:
+      Phandle to REFGEN regulator device node
+
+  vcca-supply:
+    description:
+      Phandle to vdd regulator device node
+
+  vdd-supply:
+    description:
+      VDD regulator
+
+  vddio-supply:
+    description:
+      VDD-IO regulator
+
+  vdda-supply:
+    description:
+      VDDA regulator
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - assigned-clocks
+  - assigned-clock-parents
+  - ports
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8064-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: src
+            - const: byte
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-dsi-ctrl
+              - qcom,msm8974-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+            - const: core_mmss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: byte
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-dsi-ctrl
+              - qcom,sm6125-dsi-ctrl
+              - qcom,sm6350-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-dsi-ctrl
+              - qcom,sc7280-dsi-ctrl
+              - qcom,sm8150-dsi-ctrl
+              - qcom,sm8250-dsi-ctrl
+              - qcom,sm8350-dsi-ctrl
+              - qcom,sm8450-dsi-ctrl
+              - qcom,sm8550-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 9
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: byte
+            - const: byte_intf
+            - const: mnoc
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-dsi-ctrl
+              - qcom,sm6115-dsi-ctrl
+              - qcom,sm6375-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+     #include <dt-bindings/power/qcom-rpmpd.h>
+
+     dsi@ae94000 {
+           compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+           reg = <0x0ae94000 0x400>;
+           reg-names = "dsi_ctrl";
+
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           interrupt-parent = <&mdss>;
+           interrupts = <4>;
+
+           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
+           clock-names = "byte",
+                         "byte_intf",
+                         "pixel",
+                         "core",
+                         "iface",
+                         "bus";
+
+           phys = <&dsi0_phy>;
+           phy-names = "dsi";
+
+           assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+           assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+           power-domains = <&rpmhpd SC7180_CX>;
+           operating-points-v2 = <&dsi_opp_table>;
+
+           ports {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+
+                  port@0 {
+                          reg = <0>;
+                          dsi0_in: endpoint {
+                                   remote-endpoint = <&dpu_intf1_out>;
+                          };
+                  };
+
+                  port@1 {
+                          reg = <1>;
+                          dsi0_out: endpoint {
+                                   remote-endpoint = <&sn65dsi86_in>;
+                                   data-lanes = <0 1 2 3>;
+                          };
+                  };
+           };
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
new file mode 100644
index 0000000000..69d13867b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 10nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-10nm
+      - qcom,dsi-phy-10nm-8998
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vdds-supply:
+    description: |
+      Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
+      connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
+
+  qcom,phy-rescode-offset-top:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-up legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in an increasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-rescode-offset-bot:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-down legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in a decreasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-drive-ldo-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The PHY LDO has an amplitude tuning feature to adjust the LDO output
+      for the HSTX drive. Use supported levels (mV) to offset the drive level
+      from the default value.
+    enum: [ 375, 400, 425, 450, 475, 500 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-10nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vdds-supply = <&vdda_mipi_dsi0_pll>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+
+         qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-drive-ldo-level = <400>;
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
new file mode 100644
index 0000000000..52bbe132e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 14nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-14nm
+      - qcom,dsi-phy-14nm-2290
+      - qcom,dsi-phy-14nm-660
+      - qcom,dsi-phy-14nm-8953
+      - qcom,sm6125-dsi-phy-14nm
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for an optional power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-14nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
new file mode 100644
index 0000000000..7e6687cb00
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 20nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,dsi-phy-20nm
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-20nm";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
new file mode 100644
index 0000000000..288d8babb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 28nm PHY
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-28nm-8226
+      - qcom,dsi-phy-28nm-8960
+      - qcom,dsi-phy-28nm-hpm
+      - qcom,dsi-phy-28nm-hpm-fam-b
+      - qcom,dsi-phy-28nm-lp
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-28nm-lp";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
new file mode 100644
index 0000000000..dd6619555a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 7nm PHY
+
+maintainers:
+  - Jonathan Marek <jonathan@marek.ca>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,dsi-phy-7nm
+      - qcom,dsi-phy-7nm-8150
+      - qcom,sc7280-dsi-phy-7nm
+      - qcom,sm6375-dsi-phy-7nm
+      - qcom,sm8350-dsi-phy-5nm
+      - qcom,sm8450-dsi-phy-5nm
+      - qcom,sm8550-dsi-phy-4nm
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vdds-supply:
+    description: |
+      Connected to VDD_A_DSI_PLL_0P9 pin (or VDDA_DSI{0,1}_PLL_0P9 for sm8150)
+
+  phy-type:
+    description: D-PHY (default) or C-PHY mode
+    enum: [ 10, 11 ]
+    default: 10
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-7nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94900 0x260>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vdds-supply = <&vreg_l5a_0p88>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
new file mode 100644
index 0000000000..6b57ce41c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI PHY Common Properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Common properties for Qualcomm Display DSI PHY.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ref
+
+required:
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
new file mode 100644
index 0000000000..d65926b4f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2019-2020, The Linux Foundation, All Rights Reserved
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/gmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GMU attached to certain Adreno GPUs
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+description: |
+  These bindings describe the Graphics Management Unit (GMU) that is attached
+  to members of the Adreno A6xx GPU family. The GMU provides on-device power
+  management and support to improve power efficiency and reduce the load on
+  the CPU.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno-gmu
+      - const: qcom,adreno-gmu-wrapper
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 4
+    maxItems: 7
+
+  clock-names:
+    minItems: 4
+    maxItems: 7
+
+  interrupts:
+    items:
+      - description: GMU HFI interrupt
+      - description: GMU interrupt
+
+  interrupt-names:
+    items:
+      - const: hfi
+      - const: gmu
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: GX power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: gx
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - power-domain-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-618.0
+              - qcom,adreno-gmu-630.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-635.0
+              - qcom,adreno-gmu-660.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GPU AHB clock
+            - description: GPU HUB CX clock
+            - description: GPU SMMU vote clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: ahb
+            - const: hub
+            - const: smmu_vote
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,adreno-gmu-wrapper
+    then:
+      properties:
+        reg:
+          items:
+            - description: GMU wrapper register space
+        reg-names:
+          items:
+            - const: gmu
+    else:
+      required:
+        - clocks
+        - clock-names
+        - interrupts
+        - interrupt-names
+        - iommus
+        - operating-points-v2
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gmu: gmu@506a000 {
+        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+        reg = <0x506a000 0x30000>,
+              <0xb280000 0x10000>,
+              <0xb480000 0x10000>;
+        reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+        clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+                 <&gpucc GPU_CC_CXO_CLK>,
+                 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+                 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+        clock-names = "gmu", "cxo", "axi", "memnoc";
+
+        interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "hfi", "gmu";
+
+        power-domains = <&gpucc GPU_CX_GDSC>,
+                        <&gpucc GPU_GX_GDSC>;
+        power-domain-names = "cx", "gx";
+
+        iommus = <&adreno_smmu 5>;
+        operating-points-v2 = <&gmu_opp_table>;
+    };
+
+    gmu_wrapper: gmu@596a000 {
+        compatible = "qcom,adreno-gmu-wrapper";
+        reg = <0x0596a000 0x30000>;
+        reg-names = "gmu";
+        power-domains = <&gpucc GPU_CX_GDSC>,
+                        <&gpucc GPU_GX_GDSC>;
+        power-domain-names = "cx", "gx";
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
new file mode 100644
index 0000000000..56b9b247e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -0,0 +1,343 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/gpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adreno or Snapdragon GPUs
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: |
+          The driver is parsing the compat string for Adreno to
+          figure out the chip-id.
+        items:
+          - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$'
+          - const: qcom,adreno
+      - description: |
+          The driver is parsing the compat string for Adreno to
+          figure out the gpu-id and patch level.
+        items:
+          - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno
+      - description: |
+          The driver is parsing the compat string for Imageon to
+          figure out the gpu-id and patch level.
+        items:
+          - pattern: '^amd,imageon-200\.[0-1]$'
+          - const: amd,imageon
+
+  clocks: true
+
+  clock-names: true
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: gfx-mem
+      - const: ocmem
+
+  iommus:
+    minItems: 1
+    maxItems: 64
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maxItems: 1
+    description: |
+      phandles to one or more reserved on-chip SRAM regions.
+      phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
+      a4xx Snapdragon SoCs. See
+      Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+  zap-shader:
+    type: object
+    additionalProperties: false
+    description: |
+      For a5xx and a6xx devices this node contains a memory-region that
+      points to reserved memory to store the zap shader that can be used to
+      help bring the GPU out of secure mode.
+    properties:
+      memory-region:
+        maxItems: 1
+
+      firmware-name:
+        description: |
+          Default name of the firmware to load to the remote processor.
+
+  "#cooling-cells":
+    const: 2
+
+  nvmem-cell-names:
+    maxItems: 1
+
+  nvmem-cells:
+    description: efuse registers
+    maxItems: 1
+
+  qcom,gmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      For GMU attached devices a phandle to the GMU device that will
+      control the power for the GPU.
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 7
+
+        clock-names:
+          items:
+            anyOf:
+              - const: core
+                description: GPU Core clock
+              - const: iface
+                description: GPU Interface clock
+              - const: mem
+                description: GPU Memory clock
+              - const: mem_iface
+                description: GPU Memory Interface clock
+              - const: alt_mem_iface
+                description: GPU Alternative Memory Interface clock
+              - const: gfx3d
+                description: GPU 3D engine clock
+              - const: rbbmtimer
+                description: GPU RBBM Timer for Adreno 5xx series
+              - const: rbcpr
+                description: GPU RB Core Power Reduction clock
+          minItems: 2
+          maxItems: 7
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-610.0
+              - qcom,adreno-619.1
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: alt_mem_iface
+              description: GPU Alternative Memory Interface clock
+            - const: gmu
+              description: CX GMU clock
+            - const: xo
+              description: GPUCC clocksource clock
+
+        reg-names:
+          minItems: 1
+          items:
+            - const: kgsl_3d0_reg_memory
+            - const: cx_dbgc
+
+      required:
+        - clocks
+        - clock-names
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
+
+      then: # Starting with A6xx, the clocks are usually defined in the GMU node
+        properties:
+          clocks: false
+          clock-names: false
+
+          reg-names:
+            minItems: 1
+            items:
+              - const: kgsl_3d0_reg_memory
+              - const: cx_mem
+              - const: cx_dbgc
+
+examples:
+  - |
+
+    // Example a3xx/4xx:
+
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@fdb00000 {
+        compatible = "qcom,adreno-330.2", "qcom,adreno";
+
+        reg = <0xfdb00000 0x10000>;
+        reg-names = "kgsl_3d0_reg_memory";
+
+        clock-names = "core", "iface", "mem_iface";
+        clocks = <&mmcc OXILI_GFX3D_CLK>,
+                 <&mmcc OXILICX_AHB_CLK>,
+                 <&mmcc OXILICX_AXI_CLK>;
+
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "kgsl_3d0_irq";
+
+        sram = <&gpu_sram>;
+        power-domains = <&mmcc OXILICX_GDSC>;
+        operating-points-v2 = <&gpu_opp_table>;
+        iommus = <&gpu_iommu 0>;
+        #cooling-cells = <2>;
+    };
+
+    ocmem@fdd00000 {
+        compatible = "qcom,msm8974-ocmem";
+
+        reg = <0xfdd00000 0x2000>,
+              <0xfec00000 0x180000>;
+        reg-names = "ctrl", "mem";
+
+        clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+                 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+        clock-names = "core", "iface";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
+
+        gpu_sram: gpu-sram@0 {
+            reg = <0x0 0x100000>;
+        };
+    };
+  - |
+
+    // Example a6xx (with GMU):
+
+    #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        zap_shader_region: gpu@8f200000 {
+            compatible = "shared-dma-pool";
+            reg = <0x0 0x90b00000 0x0 0xa00000>;
+            no-map;
+        };
+    };
+
+    gpu@5000000 {
+        compatible = "qcom,adreno-630.2", "qcom,adreno";
+
+        reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+        reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+        #cooling-cells = <2>;
+
+        interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+        iommus = <&adreno_smmu 0>;
+
+        operating-points-v2 = <&gpu_opp_table>;
+
+        interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+        interconnect-names = "gfx-mem";
+
+        qcom,gmu = <&gmu>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-430000000 {
+                opp-hz = /bits/ 64 <430000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                opp-peak-kBps = <5412000>;
+            };
+
+            opp-355000000 {
+                opp-hz = /bits/ 64 <355000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                opp-peak-kBps = <3072000>;
+            };
+
+            opp-267000000 {
+                opp-hz = /bits/ 64 <267000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                opp-peak-kBps = <3072000>;
+            };
+
+            opp-180000000 {
+                opp-hz = /bits/ 64 <180000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                opp-peak-kBps = <1804000>;
+            };
+        };
+
+        zap-shader {
+            memory-region = <&zap_shader_region>;
+            firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 0000000000..47e9766982
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+    deprecated: true
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+    deprecated: true
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  qcom,hdmi-tx-mux-en-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux enable pin
+
+  qcom,hdmi-tx-mux-sel-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux select pin
+
+  qcom,hdmi-tx-mux-lpm-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux lpm pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
new file mode 100644
index 0000000000..35204a2875
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdp4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+  MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    const: qcom,mdp4
+
+  clocks:
+    minItems: 6
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: iface_clk
+      - const: bus_clk
+      - const: lut_clk
+      - const: hdmi_clk
+      - const: tv_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LCDC/LVDS
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI1 Cmd / Video
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI2 Cmd / Video
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Digital TV
+
+  qcom,lcdc-align-lsb:
+    type: boolean
+    description: >
+      Indication that LSB alignment should be used for LCDC.
+      This is only valid for 18bpp panels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mdp: mdp@5100000 {
+        compatible = "qcom,mdp4";
+        reg = <0x05100000 0xf0000>;
+        interrupts = <0 75 0>;
+        clock-names =
+            "core_clk",
+            "iface_clk",
+            "bus_clk",
+            "lut_clk",
+            "hdmi_clk",
+            "tv_clk";
+        clocks =
+            <&mmcc 77>,
+            <&mmcc 86>,
+            <&mmcc 102>,
+            <&mmcc 75>,
+            <&mmcc 97>,
+            <&mmcc 12>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mdp_lvds_out: endpoint {
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mdp_dsi1_out: endpoint {
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                mdp_dsi2_out: endpoint {
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                mdp_dtv_out: endpoint {
+                    remote-endpoint = <&hdmi_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
new file mode 100644
index 0000000000..f69196e4cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+# Do not select this by default, otherwise it is also selected for qcom,mdss
+# devices.
+select:
+  false
+
+properties:
+  $nodename:
+    pattern: "^display-subsystem@[0-9a-f]+$"
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    minItems: 1
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing a reserved framebuffer memory region.
+      For example, the splash memory region set up by the bootloader.
+
+required:
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 0000000000..91c774f106
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description:
+  MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+  and MSM8996.
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,mdp5
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-mdp5
+              - qcom,msm8226-mdp5
+              - qcom,msm8916-mdp5
+              - qcom,msm8917-mdp5
+              - qcom,msm8953-mdp5
+              - qcom,msm8974-mdp5
+              - qcom,msm8976-mdp5
+              - qcom,msm8994-mdp5
+              - qcom,msm8996-mdp5
+              - qcom,sdm630-mdp5
+              - qcom,sdm660-mdp5
+          - const: qcom,mdp5
+
+  $nodename:
+    pattern: '^display-controller@[0-9a-f]+$'
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: mdp_phys
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 7
+
+  clock-names:
+    oneOf:
+      - minItems: 4
+        items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: vsync
+          - const: lut
+          - const: tbu
+          - const: tbu_rt
+        # MSM8996 has additional iommu clock
+      - items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: iommu
+          - const: vsync
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from rotator port to the data bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+      - const: rotator-mem
+
+  iommus:
+    items:
+      - description: apps SMMU with the Stream-ID mask for Hard-Fail port0
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: >
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc. MDP5 devices support up to 4 ports:
+      one or two DSI ports, HDMI and eDP.
+
+    patternProperties:
+      "^port@[0-3]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    display-controller@1a01000 {
+        compatible = "qcom,mdp5";
+        reg = <0x1a01000 0x90000>;
+        reg-names = "mdp_phys";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_MDP_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
new file mode 100644
index 0000000000..0999ea07f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Mobile Display SubSystem (MDSS)
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  This is the bindings documentation for the Mobile Display Subsystem(MDSS) that
+  encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
+
+properties:
+  $nodename:
+    pattern: "^display-subsystem@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - qcom,mdss
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: mdss_phys
+      - const: vbif_phys
+      - const: vbif_nrt_phys
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+    description: |
+      The MDSS power domain provided by GCC
+
+  clocks:
+    oneOf:
+      - minItems: 3
+        items:
+          - description: Display abh clock
+          - description: Display axi clock
+          - description: Display vsync clock
+          - description: Display core clock
+      - minItems: 1
+        items:
+          - description: Display abh clock
+          - description: Display core clock
+
+  clock-names:
+    oneOf:
+      - minItems: 3
+        items:
+          - const: iface
+          - const: bus
+          - const: vsync
+          - const: core
+      - minItems: 1
+        items:
+          - const: iface
+          - const: core
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - power-domains
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "^display-controller@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,mdp5
+
+  "^dsi@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,mdss-dsi-ctrl
+
+  "^phy@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        enum:
+          - qcom,dsi-phy-14nm
+          - qcom,dsi-phy-14nm-660
+          - qcom,dsi-phy-14nm-8953
+          - qcom,dsi-phy-20nm
+          - qcom,dsi-phy-28nm-8226
+          - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-lp
+          - qcom,hdmi-phy-8084
+          - qcom,hdmi-phy-8660
+          - qcom,hdmi-phy-8960
+          - qcom,hdmi-phy-8974
+          - qcom,hdmi-phy-8996
+
+  "^hdmi-tx@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        enum:
+          - qcom,hdmi-tx-8084
+          - qcom,hdmi-tx-8660
+          - qcom,hdmi-tx-8960
+          - qcom,hdmi-tx-8974
+          - qcom,hdmi-tx-8994
+          - qcom,hdmi-tx-8996
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    display-subsystem@1a00000 {
+        compatible = "qcom,mdss";
+        reg = <0x1a00000 0x1000>,
+              <0x1ac8000 0x3000>;
+        reg-names = "mdss_phys", "vbif_phys";
+
+        power-domains = <&gcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "vsync";
+
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@1a01000 {
+            compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+            reg = <0x01a01000 0x89000>;
+            reg-names = "mdp_phys";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                     <&gcc GCC_MDSS_AXI_CLK>,
+                     <&gcc GCC_MDSS_MDP_CLK>,
+                     <&gcc GCC_MDSS_VSYNC_CLK>;
+            clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+            iommus = <&apps_iommu 4>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdp5_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
new file mode 100644
index 0000000000..d5a64c8a92
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on MSM8998
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8998-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for regdma register set
+      - description: Address offset and size for vbif register set
+      - description: Address offset and size for non-realtime vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: regdma
+      - const: vbif
+      - const: vbif_nrt
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display mem-noc clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: mnoc
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@c901000 {
+        compatible = "qcom,msm8998-dpu";
+        reg = <0x0c901000 0x8f000>,
+              <0x0c9a8e00 0xf0>,
+              <0x0c9b0000 0x2008>,
+              <0x0c9b8000 0x1040>;
+        reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MNOC_AHB_CLK>,
+                 <&mmcc MDSS_MDP_CLK>,
+                 <&mmcc MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd MSM8998_VDDMX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
new file mode 100644
index 0000000000..e320ab1de6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 Display MDSS
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for MSM8998 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8998-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,msm8998-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,msm8998-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm-8998
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+
+        display-controller@c901000 {
+            compatible = "qcom,msm8998-dpu";
+            reg = <0x0c901000 0x8f000>,
+                  <0x0c9a8e00 0xf0>,
+                  <0x0c9b0000 0x2008>,
+                  <0x0c9b8000 0x1040>;
+            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>,
+                     <&mmcc MNOC_AHB_CLK>,
+                     <&mmcc MDSS_MDP_CLK>,
+                     <&mmcc MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDMX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@c994000 {
+            compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0c994000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&mmcc MDSS_BYTE0_CLK>,
+                     <&mmcc MDSS_BYTE0_INTF_CLK>,
+                     <&mmcc MDSS_PCLK0_CLK>,
+                     <&mmcc MDSS_ESC0_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@c994400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c994400 0x200>,
+                  <0x0c994600 0x280>,
+                  <0x0c994a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+
+        dsi@c996000 {
+            compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0c996000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&mmcc MDSS_BYTE1_CLK>,
+                     <&mmcc MDSS_BYTE1_INTF_CLK>,
+                     <&mmcc MDSS_PCLK1_CLK>,
+                     <&mmcc MDSS_ESC1_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@c996400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c996400 0x200>,
+                  <0x0c996600 0x280>,
+                  <0x0c996a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
new file mode 100644
index 0000000000..be6cd8adb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock from dispcc
+      - description: Display lut clock from dispcc
+      - description: Display vsync clock from dispcc
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,qcm2290-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd QCM2290_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
new file mode 100644
index 0000000000..4184b84d4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM220 Display MDSS
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for QCM2290 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,qcm2290-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,qcm2290-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+            vcca-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
new file mode 100644
index 0000000000..8137618237
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7180
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-dpu
+      - qcom,sm6125-dpu
+      - qcom,sm6350-dpu
+      - qcom,sm6375-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    minItems: 6
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+      - description: Display core throttle clock
+
+  clock-names:
+    minItems: 6
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+      - const: throttle
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6375-dpu
+            - qcom,sm6125-dpu
+
+    then:
+      properties:
+        clocks:
+          minItems: 7
+
+        clock-names:
+          minItems: 7
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7180-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "rot", "lut", "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
new file mode 100644
index 0000000000..3b9c103e50
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7180 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7180-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7180-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7180-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7180-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7180_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            phys = <&dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7180-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface", "core_aux", "ctrl_link",
+                          "ctrl_link_iface", "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
new file mode 100644
index 0000000000..b0fbe86219
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7280
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7280-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7280_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&edp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
new file mode 100644
index 0000000000..43500dad66
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -0,0 +1,427 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7280.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7280-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^edp@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-edp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-dsi-phy-7nm
+          - qcom,sc7280-edp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7280-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x900 0x402>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7280-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7280_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf5_out: endpoint {
+                        remote-endpoint = <&edp_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            phys = <&mdss_dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi_phy: phy@ae94400 {
+            compatible = "qcom,sc7280-dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x280>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        edp@aea0000 {
+            compatible = "qcom,sc7280-edp";
+            pinctrl-names = "default";
+            pinctrl-0 = <&edp_hot_plug_det>;
+
+            reg = <0xaea0000 0x200>,
+                  <0xaea0200 0x200>,
+                  <0xaea0400 0xc00>,
+                  <0xaea1000 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <14>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+            phys = <&mdss_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&edp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    edp_in: endpoint {
+                        remote-endpoint = <&dpu_intf5_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_edp_out: endpoint { };
+                };
+            };
+
+            edp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        mdss_edp_phy: phy@aec2a00 {
+            compatible = "qcom,sc7280-edp-phy";
+
+            reg = <0xaec2a00 0x19c>,
+                  <0xaec2200 0xa0>,
+                  <0xaec2600 0xa0>,
+                  <0xaec2000 0x1c0>;
+
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_EDP_CLKREF_EN>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7280-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
new file mode 100644
index 0000000000..d19e3bec46
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Display Processing Unit
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Device tree bindings for SC8280XP Display Processing Unit.
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc8280xp-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                          <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <460000000>,
+                               <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+        interrupt-parent = <&mdss0>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp0_in>;
+                };
+            };
+
+            port@4 {
+                reg = <4>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp1_in>;
+                };
+            };
+
+            port@5 {
+                reg = <5>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp3_in>;
+                };
+            };
+
+            port@6 {
+                reg = <6>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp2_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 0000000000..db680fb12b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc8280xp-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc8280xp-dp
+          - qcom,sc8280xp-edp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sc8280xp-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc0 MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc8280xp-dpu";
+            reg = <0x0ae01000 0x8f000>,
+            <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdss0_mdp_opp_table>;
+            power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp0_in>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp1_in>;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp3_in>;
+                    };
+                };
+
+                port@6 {
+                    reg = <6>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp2_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
new file mode 100644
index 0000000000..b917064bdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SDM845
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display GCC bus clock
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: gcc-bus
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sdm845-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SDM845_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
new file mode 100644
index 0000000000..d6d7ac1b2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SDM845 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sdm845-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sdm845-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sdm845-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sdm845-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm845-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM845_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
new file mode 100644
index 0000000000..510eb6c193
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SM6115
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6115-dpu
+
+  reg:
+    items:
+      - description: MDP register set
+      - description: VBIF register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI
+      - description: Display AHB
+      - description: Display core
+      - description: Display lut
+      - description: Display rotator
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: rot
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,sm6115-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd SM6115_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
new file mode 100644
index 0000000000..17221b62a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for SM6115 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6115-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  iommus:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6115-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: qcom,sm6115-dsi-ctrl
+              - const: qcom,mdss-dsi-ctrl
+          - description: Old binding, please don't use
+            deprecated: true
+            const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sm6115-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6115-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+            phys = <&dsi0_phy>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
new file mode 100644
index 0000000000..57f0e36477
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6125 Display MDSS
+
+maintainers:
+  - Marijn Suijten <marijn.suijten@somainline.org>
+
+description:
+  SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6125-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6125-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6125-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6125-dsi-phy-14nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        compatible = "qcom,sm6125-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        iommus = <&apps_smmu 0x400 0x0>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6125-dpu";
+            reg = <0x05e01000 0x83208>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync",
+                          "throttle";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6125_VDDCX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                      <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6125_VDDCX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        phy@5e94400 {
+            compatible = "qcom,sm6125-dsi-phy-14nm";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface",
+                          "ref";
+
+            required-opps = <&rpmpd_opp_nom>;
+            power-domains = <&rpmpd SM6125_VDDMX>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
new file mode 100644
index 0000000000..db255b1f4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6350-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm6350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm6350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+              <&dispcc DISP_CC_MDSS_AHB_CLK>,
+              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_CLK>,
+              <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                    "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                              <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                              <&dispcc DISP_CC_MDSS_AHB_CLK>;
+            assigned-clock-rates = <300000000>,
+                                   <19200000>,
+                                   <19200000>,
+                                   <19200000>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM6350_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM6350_MX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
new file mode 100644
index 0000000000..30d36fffae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6375 Display MDSS
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+  SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6375-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6375-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6375-dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        compatible = "qcom,sm6375-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6375-dpu";
+            reg = <0x05e01000 0x8e030>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync",
+                          "throttle";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6375_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6375_VDDMX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@5e94400 {
+            compatible = "qcom,sm6375-dsi-phy-7nm";
+            reg = <0x05e94400 0x200>,
+                  <0x05e94600 0x280>,
+                  <0x05e94900 0x264>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
new file mode 100644
index 0000000000..13146b3f05
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8150-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8150_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
new file mode 100644
index 0000000000..54cdaa827c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -0,0 +1,332 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8150-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8150-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8150-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8150-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x420>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8150-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-171428571 {
+                    opp-hz = /bits/ 64 <171428571>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
new file mode 100644
index 0000000000..ffa5047e90
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8250-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 0000000000..e887f031b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,334 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8250-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8250-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8250-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8250-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
new file mode 100644
index 0000000000..96ef2d9c35
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display DPU
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8350-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8350-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-345000000 {
+                opp-hz = /bits/ 64 <345000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-460000000 {
+                opp-hz = /bits/ 64 <460000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 0000000000..60d4aae113
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,229 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description:
+  MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8350-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8350-dsi-phy-5nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi0: dsi@ae94000 {
+            compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                      "byte_intf",
+                      "pixel",
+                      "core",
+                      "iface",
+                      "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                          <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>,
+                                 <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi0_phy>;
+
+            ports {
+             #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
new file mode 100644
index 0000000000..2a5d3daed0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi
+      - description: Display sf axi
+      - description: Display ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8450-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                <&gcc GCC_DISP_SF_AXI_CLK>,
+                <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-172000000{
+                opp-hz = /bits/ 64 <172000000>;
+                required-opps = <&rpmhpd_opp_low_svs_d1>;
+            };
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-500000000 {
+                opp-hz = /bits/ 64 <500000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
new file mode 100644
index 0000000000..bb22940b93
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -0,0 +1,353 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display sf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8450-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8450-dp
+          - const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8450-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8450-dsi-phy-5nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8450-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+                        <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x2800 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8450-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&gcc GCC_DISP_SF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-172000000{
+                    opp-hz = /bits/ 64 <172000000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160310000{
+                    opp-hz = /bits/ 64 <160310000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8450-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8450-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
new file mode 100644
index 0000000000..16a541fca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display DPU
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf axi
+      - description: Display MDSS ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8550-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                <&gcc GCC_DISP_HF_AXI_CLK>,
+                <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-514000000 {
+                opp-hz = /bits/ 64 <514000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 0000000000..48aea8005c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,341 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8550-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8550-dp
+          - const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8550-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8550-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8550-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8550-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AHB_CLK>,
+                    <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8550-dsi-phy-4nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8550-dsi-phy-4nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 0000000000..eed48c3d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible:	"multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios:	D/C pin. The presence/absence of this GPIO determines
+		the panel interface mode (IM[3:0] pins):
+		- present: IM=x110 4-wire 8-bit data serial interface
+		- absent:  IM=x101 3-wire 9-bit data serial interface
+- reset-gpios:	Reset pin
+- power-supply:	A regulator node for the supply voltage.
+- backlight:	phandle of the backlight device attached to the panel
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	mi0283qt@0{
+		compatible = "multi-inno,mi0283qt";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		rotation = <90>;
+		dc-gpios = <&gpio 25 0>;
+		backlight = <&backlight>;
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
new file mode 100644
index 0000000000..acd2f3faa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: abt,y030xx067a
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "abt,y030xx067a";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
new file mode 100644
index 0000000000..f6fea9085a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-1110wr
+      - const: panel-lvds
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 223
+
+  height-mm:
+    const: 125
+
+  panel-timing: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+examples:
+  - |+
+    panel {
+      compatible = "advantech,idk-1110wr", "panel-lvds";
+
+      width-mm = <223>;
+      height-mm = <125>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1024x600 @60Hz */
+        clock-frequency = <51200000>;
+        hactive = <1024>;
+        vactive = <600>;
+        hsync-len = <240>;
+        hfront-porch = <40>;
+        hback-porch = <40>;
+        vsync-len = <10>;
+        vfront-porch = <15>;
+        vback-porch = <10>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
new file mode 100644
index 0000000000..2e8dbdb5a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel.
+  A dual-LVDS interface is a dual-link connection with even pixels traveling
+  on one link, and with odd pixels traveling on the other link.
+
+  The panel expects odd pixels on the first port, and even pixels on the
+  second port, therefore the ports must be marked accordingly (with either
+  dual-lvds-odd-pixels or dual-lvds-even-pixels).
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: advantech,idk-2121wr
+      - {} # panel-lvds, but not listed here to avoid false select
+
+  width-mm:
+    const: 476
+
+  height-mm:
+    const: 268
+
+  data-mapping:
+    const: vesa-24
+
+  panel-timing: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: The sink for odd pixels.
+        properties:
+          dual-lvds-odd-pixels: true
+
+        required:
+          - dual-lvds-odd-pixels
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: The sink for even pixels.
+        properties:
+          dual-lvds-even-pixels: true
+
+        required:
+          - dual-lvds-even-pixels
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - width-mm
+  - height-mm
+  - data-mapping
+  - panel-timing
+  - ports
+
+examples:
+  - |+
+    panel-lvds {
+      compatible = "advantech,idk-2121wr", "panel-lvds";
+
+      width-mm = <476>;
+      height-mm = <268>;
+
+      data-mapping = "vesa-24";
+
+      panel-timing {
+        clock-frequency = <148500000>;
+        hactive = <1920>;
+        vactive = <1080>;
+        hsync-len = <44>;
+        hfront-porch = <88>;
+        hback-porch = <148>;
+        vfront-porch = <4>;
+        vback-porch = <36>;
+        vsync-len = <5>;
+      };
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          dual-lvds-odd-pixels;
+          panel_in0: endpoint {
+            remote-endpoint = <&lvds0_out>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          dual-lvds-even-pixels;
+          panel_in1: endpoint {
+            remote-endpoint = <&lvds1_out>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 0000000000..4ad484f09b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,rtsm-display
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
new file mode 100644
index 0000000000..c9958f824d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile TFT Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  These panels are connected to the daughterboards found on the
+  ARM Versatile reference designs.
+
+  This device node must appear as a child to a "syscon"-compatible
+  node.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-tft-panel
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+        reg = <0x00000 0x1000>;
+
+        panel {
+            compatible = "arm,versatile-tft-panel";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&foo>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml
new file mode 100644
index 0000000000..a6ade47066
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/armadeus,st0700-adapt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Armadeus ST0700 Adapter
+
+description:
+  A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with an adapter board.
+
+maintainers:
+  - '"Sébastien Szymanski" <sebastien.szymanski@armadeus.com>'
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: armadeus,st0700-adapt
+
+  power-supply: true
+  backlight: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
new file mode 100644
index 0000000000..75a09df68b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
+
+maintainers:
+  - Konrad Dybcio <konradybcio@gmail.com>
+
+description: |+
+  This panel seems to only be found in the Asus Z00T
+  smartphone and we have no straightforward way of
+  actually getting the correct model number,
+  as no schematics are released publicly.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: asus,z00t-tm5p5-n35596
+  reg: true
+  reset-gpios: true
+  vdd-supply:
+    description: core voltage supply
+  vddio-supply:
+    description: vddio supply
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            panel@0 {
+                    reg = <0>;
+
+                    compatible = "asus,z00t-tm5p5-n35596";
+
+                    vdd-supply = <&pm8916_l8>;
+                    vddio-supply = <&pm8916_l6>;
+                    reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 0000000000..86c834eb4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+  Delta RGB 8-bit panel found in some Retrogame handhelds
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "auo,a030jtn01";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml
new file mode 100644
index 0000000000..bbf127fb28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/bananapi,s070wv20-ct16.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: bananapi,s070wv20-ct16
+
+  power-supply: true
+  backlight: true
+  enable-gpios: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 0000000000..a8f3afa922
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+  pixel arrangement, 63 micrometers pitch, with an active
+  area of 68.04 x 136.08 millimeters.
+  Each pixel is divided into red and green dots, or blue and
+  green dots, and two pixels share red or blue dots which are
+  arranged in vertical stripe.
+  The DriverIC for this panel module is SW43404.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,bf060y8m-aj0
+
+  elvdd-supply:
+    description: EL Driving positive (VDD) supply (4.40-4.80V)
+  elvss-supply:
+    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+  vcc-supply:
+    description: Core (TSP) voltage supply (2.70-3.60V)
+  vci-supply:
+    description: DriverIC Operation supply (2.60-3.60V)
+  vddio-supply:
+    description: I/O voltage supply (1.62-1.98V)
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - elvdd-supply
+  - elvss-supply
+  - vcc-supply
+  - vci-supply
+  - vddio-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,bf060y8m-aj0";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            vcc-supply = <&disp_vcc_vreg>;
+            vddio-supply = <&disp_vddio_vreg>;
+            vci-supply = <&disp_vci_vreg>;
+            elvdd-supply = <&disp_elvdd_vreg>;
+            elvss-supply = <&disp_elvss_vreg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
new file mode 100644
index 0000000000..272a3a018a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Boe Himax8279d 1200x1920 TFT LCD panel
+
+maintainers:
+  - Jerry Han <jerry.han.hq@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,himax8279d8p
+      - const: boe,himax8279d10p
+
+  backlight: true
+  enable-gpios: true
+  reg: true
+
+  pp33-gpios:
+    maxItems: 1
+    description: GPIO for the 3.3v pin that provides the supply voltage
+
+  pp18-gpios:
+    maxItems: 1
+    description: GPIO for the 1.8v pin that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp33-gpios
+  - pp18-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+            pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 0000000000..906ef62709
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-nl6
+        # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+      - auo,kd101n80-45na
+        # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+      - boe,tv101wum-n53
+        # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+      - auo,b101uan08.3
+        # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+      - boe,tv105wum-nw0
+        # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel
+      - boe,tv110c9m-ll3
+        # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
+      - innolux,hj110iz-01a
+        # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
+      - starry,2081101qfh032011-53g
+        # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+      - starry,himax83102-j02
+        # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+      - starry,ili9882t
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  pp3300-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight:
+    description: phandle of the backlight device attached to the panel
+
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-nl6";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt
new file mode 100644
index 0000000000..7f55ad4a40
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt
@@ -0,0 +1 @@
+See display-timings.yaml in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
new file mode 100644
index 0000000000..dc5f7e36e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: display timings
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  A display panel may be able to handle several display timings,
+  with different resolutions.
+  The display-timings node makes it possible to specify the timings
+  and to specify the timing that is native for the display.
+
+properties:
+  $nodename:
+    const: display-timings
+
+  native-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The default display timing is the one specified as native-mode.
+      If no native-mode is specified then the first node is assumed
+      to be the native mode.
+
+patternProperties:
+  "^timing":
+    type: object
+    $ref: panel-timing.yaml#
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    /*
+     * Example that specifies panel timing using minimum, typical,
+     * maximum values as commonly used in datasheet description.
+     * timing1 is the native-mode.
+     */
+    display-timings {
+        native-mode = <&timing1>;
+        timing0 {
+            /* 1920x1080p24 */
+            clock-frequency = <148500000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hsync-len = <0 44 60>;
+            hfront-porch = <80 88 95>;
+            hback-porch = <100 148 160>;
+            vfront-porch = <0 4 6>;
+            vback-porch = <0 36 50>;
+            vsync-len = <0 5 6>;
+        };
+        timing1 {
+            /* 1920x1080p24 */
+            clock-frequency = <52000000>;
+            hactive = <1920>;
+            vactive = <1080>;
+            hfront-porch = <25>;
+            hback-porch = <25>;
+            hsync-len = <0 25 25>;
+            vback-porch = <2>;
+            vfront-porch = <2>;
+            vsync-len = <2>;
+            hsync-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml
new file mode 100644
index 0000000000..287e2feb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/dlc,dlc0700yzg-1.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/dlc,dlc0700yzg-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: dlc,dlc0700yzg-1
+
+  reset-gpios: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 0000000000..80deedc01c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+  - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+  of 1080x2246. It is a video mode DSI panel. The backlight is managed
+  through the QCOM WLED driver.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ebbg,ft8719
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel of the peripheral
+
+  vddio-supply:
+    description: power IC supply regulator
+
+  vddpos-supply:
+    description: positive boost supply regulator
+
+  vddneg-supply:
+    description: negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "ebbg,ft8719";
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+        vddpos-supply = <&lab>;
+        vddneg-supply = <&ibb>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+        backlight = <&pmi8998_wled>;
+
+        port {
+          ebbg_ft8719_in_0: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
new file mode 100644
index 0000000000..265ab6d305
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elida KD35T133 3.5in 320x480 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: elida,kd35t133
+  reg: true
+  backlight: true
+  port: true
+  reset-gpios: true
+  rotation: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vdd-supply:
+    description: regulator that supplies the vdd voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - port
+  - iovcc-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "elida,kd35t133";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
new file mode 100644
index 0000000000..81adb82f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+  - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feixin,k101-im2ba02
+  reg: true
+  backlight: true
+  reset-gpios: true
+  avdd-supply:
+    description: regulator that supplies the AVDD voltage
+  dvdd-supply:
+    description: regulator that supplies the DVDD voltage
+  cvdd-supply:
+    description: regulator that supplies the CVDD voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - cvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "feixin,k101-im2ba02";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dc1sw>;
+            cvdd-supply = <&reg_ldo_io1>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
new file mode 100644
index 0000000000..92df69e80a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: feiyang,fy07024di26a30d
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  avdd-supply:
+    description: analog regulator dc1 switch
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  port: true
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "feiyang,fy07024di26a30d";
+            reg = <0>;
+            avdd-supply = <&reg_dc1sw>;
+            dvdd-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 0000000000..d54e96b2a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: focaltech,gpt3
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "focaltech,gpt3";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
new file mode 100644
index 0000000000..ffb35288ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8394 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+  Device tree bindings for panels based on the Himax HX8394 controller,
+  such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - hannstar,hsd060bhw4
+      - const: himax,hx8394
+
+  reg: true
+
+  reset-gpios: true
+
+  backlight: true
+
+  port: true
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - backlight
+  - port
+  - vcc-supply
+  - iovcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 0000000000..90e323e19e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description:
+  This binding is for display panels using an Ilitek ILI9163 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - newhaven,1.8-128160EF
+      - const: ilitek,ili9163
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0 {
+                    compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
new file mode 100644
index 0000000000..7d221ef354
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9322 TFT panel driver with SPI control bus
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This is a driver for 320x240 TFT panels, accepting a variety of input
+  streams that get adapted and scaled to the panel. The panel output has
+  960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+  VCOMH outputs.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dlink,dir-685-panel
+      - const: ilitek,ili9322
+
+  reset-gpios: true
+  port: true
+
+  vcc-supply:
+    description: Core voltage supply
+
+  iovcc-supply:
+    description: Voltage supply for the interface input/output signals
+
+  vci-supply:
+    description: Voltage supply for analog parts
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: display@0 {
+            compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+            reg = <0>;
+            vcc-supply = <&vdisp>;
+            iovcc-supply = <&vdisp>;
+            vci-supply = <&vdisp>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
new file mode 100644
index 0000000000..94f169ea06
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek-9341 Display Panel
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+description: |
+  Ilitek ILI9341 TFT panel driver with SPI control bus
+  This is a driver for 320x240 TFT panels, accepting a rgb input
+  streams with 16 bits or 18 bits.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adafruit,yx240qv29
+          # ili9341 240*320 Color on stm32f429-disco board
+          - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
+      - const: ilitek,ili9341
+
+  reg: true
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX) of this DBI panel
+
+  spi-3wire: true
+
+  spi-max-frequency:
+    const: 10000000
+
+  port: true
+
+  vci-supply:
+    description: Analog voltage supply (2.5 .. 3.3V)
+
+  vddi-supply:
+    description: Voltage supply for interface logic (1.65 .. 3.3 V)
+
+  vddi-led-supply:
+    description: Voltage supply for the LED driver (1.65 .. 3.3 V)
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
+
+examples:
+  - |+
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel: display@0 {
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
new file mode 100644
index 0000000000..e7ab6224b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9881c based MIPI-DSI panels
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - bananapi,lhr050h41
+          - feixin,k101-im2byl02
+          - tdo,tl050hdv35
+          - wanchanglong,w552946aba
+      - const: ilitek,ili9881c
+
+  backlight: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+            reg = <0>;
+            power-supply = <&reg_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&pwm_bl>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
new file mode 100644
index 0000000000..ab6b7be883
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ee101ia-01d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@bq.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: innolux,ee101ia-01d
+      - const: panel-lvds
+
+  backlight: true
+  data-mapping: true
+  enable-gpios: true
+  power-supply: true
+  width-mm: true
+  height-mm: true
+  panel-timing: true
+  port: true
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
new file mode 100644
index 0000000000..72788e3e6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: innolux,ej030na
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,ej030na";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
new file mode 100644
index 0000000000..5a5f071627
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+maintainers:
+  - Lin Huang <hl@rock-chips.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: innolux,p097pfg
+
+  backlight: true
+  enable-gpios: true
+  reg: true
+
+  avdd-supply:
+    description: The regulator that provides positive voltage
+
+  avee-supply:
+    description: The regulator that provides negative voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "innolux,p097pfg";
+            reg = <0>;
+            avdd-supply = <&avdd>;
+            avee-supply = <&avee>;
+            backlight = <&backlight>;
+            enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
new file mode 100644
index 0000000000..41eb7fbf77
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - chongzhou,cz101b4001
+          - radxa,display-10hd-ad001
+          - radxa,display-8hd-ad002
+      - const: jadard,jd9365da-h3
+
+  reg: true
+
+  vdd-supply:
+    description: supply regulator for VDD, usually 3.3V
+
+  vccio-supply:
+    description: supply regulator for VCCIO, usually 1.8V
+
+  reset-gpios: true
+
+  backlight: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+            reg = <0>;
+            vdd-supply = <&lcd_3v3>;
+            vccio-supply = <&vcca_1v8>;
+            reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 0000000000..63c82a4378
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lt070me05000
+
+  enable-gpios: true
+  reg: true
+  reset-gpios: true
+
+  vddp-supply:
+    description: |
+      The regulator that provides the supply voltage Power IC supply (3-5V)
+
+  iovcc-supply:
+    description: |
+      The regulator that provides the supply voltage IOVCC,
+      power supply for LCM (1.8V)
+
+  dcdc-en-gpios:
+    maxItems: 1
+    description: |
+      phandle of the gpio for power ic line
+      Power IC supply enable, High active
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vddp-supply
+  - iovcc-supply
+  - enable-gpios
+  - reset-gpios
+  - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "jdi,lt070me05000";
+            reg = <0>;
+
+            vddp-supply = <&pm8921_l17>;
+            iovcc-supply = <&pm8921_lvs7>;
+
+            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
new file mode 100644
index 0000000000..b4be9bd8dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: kingdisplay,kd035g6-54nt
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "kingdisplay,kd035g6-54nt";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+            spi-3wire;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&ldo6>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 0000000000..ebdca5f5a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
new file mode 100644
index 0000000000..3f6efbb942
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - leadtek,ltk050h3146w
+      - leadtek,ltk050h3146w-a2
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vci-supply:
+    description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk050h3146w";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
new file mode 100644
index 0000000000..c5944b4d63
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk500hd1829
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vcc-supply:
+    description: regulator that supplies the vcc voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "leadtek,ltk500hd1829";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vcc-supply = <&vcc_2v8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
new file mode 100644
index 0000000000..ee357e139a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Heiko Schocher <hs@denx.de>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: lg,lg4573
+
+  reg: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd_panel: display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <10000000>;
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
new file mode 100644
index 0000000000..628c4b8981
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG.Philips LB035Q02 Panel
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: lgphilips,lb035q02
+
+  label: true
+  enable-gpios: true
+  port: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - enable-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "lgphilips,lb035q02";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            enable-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
new file mode 100644
index 0000000000..2834287b8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+  - Adam Ford <aford173@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: logicpd,type28
+
+  power-supply: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd0: display {
+      compatible = "logicpd,type28";
+      enable-gpios = <&gpio5 27 0>;
+      backlight = <&backlight>;
+      port {
+        lcd_in: endpoint {
+          remote-endpoint = <&dpi_out>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
new file mode 100644
index 0000000000..74ff772973
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description:
+  Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mantix,mlaf057we51-x
+      - ys,ys57pss36bh5gq
+
+  port: true
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  avdd-supply:
+    description: Positive analog power supply
+
+  avee-supply:
+    description: Negative analog power supply
+
+  vddi-supply:
+    description: 1.8V I/O voltage supply
+
+  reset-gpios: true
+
+  mantix,tp-rstn-gpios:
+    maxItems: 1
+    description: second reset line that triggers DSI config load
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - avee-supply
+  - vddi-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "mantix,mlaf057we51-x";
+            reg = <0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            vddi-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
new file mode 100644
index 0000000000..3623ffa651
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa104xd12.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA104XD12 10.4" XGA LVDS Display Panel
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: mitsubishi,aa104xd12
+      - const: panel-lvds
+
+  vcc-supply:
+    description: Reference to the regulator powering the panel VCC pins.
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 210
+
+  height-mm:
+    const: 158
+
+  panel-timing: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+examples:
+  - |+
+
+    panel {
+      compatible = "mitsubishi,aa104xd12", "panel-lvds";
+      vcc-supply = <&vcc_3v3>;
+
+      width-mm = <210>;
+      height-mm = <158>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1024x768 @65Hz */
+        clock-frequency = <65000000>;
+        hactive = <1024>;
+        vactive = <768>;
+        hsync-len = <136>;
+        hfront-porch = <20>;
+        hback-porch = <160>;
+        vfront-porch = <3>;
+        vback-porch = <29>;
+        vsync-len = <6>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
new file mode 100644
index 0000000000..37f01d847a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa121td01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA121TD01 12.1" WXGA LVDS Display Panel
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: mitsubishi,aa121td01
+      - const: panel-lvds
+
+  vcc-supply:
+    description: Reference to the regulator powering the panel VCC pins.
+
+  data-mapping:
+    const: jeida-24
+
+  width-mm:
+    const: 261
+
+  height-mm:
+    const: 163
+
+  panel-timing: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+examples:
+  - |+
+    panel {
+      compatible = "mitsubishi,aa121td01", "panel-lvds";
+      vcc-supply = <&vcc_3v3>;
+
+      width-mm = <261>;
+      height-mm = <163>;
+
+      data-mapping = "jeida-24";
+
+      panel-timing {
+        /* 1280x800 @60Hz */
+        clock-frequency = <71000000>;
+        hactive = <1280>;
+        vactive = <800>;
+        hsync-len = <70>;
+        hfront-porch = <20>;
+        hback-porch = <70>;
+        vsync-len = <5>;
+        vfront-porch = <3>;
+        vback-porch = <15>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
new file mode 100644
index 0000000000..accf933d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
+
+description:
+  The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
+  data interface and an SPI control interface.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: nec,nl8048hl11
+
+  label: true
+  port: true
+  reg: true
+  reset-gpios: true
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lcd_panel: panel@0 {
+        compatible = "nec,nl8048hl11";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+
+        reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+
+        port {
+          lcd_in: endpoint {
+            remote-endpoint = <&dpi_out>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
new file mode 100644
index 0000000000..116c1b6030
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+  The NewVision NV3051D is a driver chip used to drive DSI panels. For now,
+  this driver only supports the 640x480 panels found in the Anbernic RG353
+  based devices.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - anbernic,rg353p-panel
+          - anbernic,rg353v-panel
+      - const: newvision,nv3051d
+
+  reg: true
+  backlight: true
+  port: true
+  reset-gpios:
+    description: Active low reset GPIO
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
new file mode 100644
index 0000000000..bc92928c80
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35510-based display panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: hydis,hva40wv1
+      - const: novatek,nt35510
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35510 panel driver. The compatible
+      string determines how the NT35510 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35510 compatible shall
+      always be provided as a fallback.
+  reg: true
+  reset-gpios: true
+  vdd-supply:
+    description: regulator that supplies the vdd voltage
+  vddi-supply:
+    description: regulator that supplies the vddi voltage
+  backlight: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hydis,hva40wv1", "novatek,nt35510";
+            reg = <0>;
+            vdd-supply = <&ab8500_ldo_aux4_reg>;
+            vddi-supply = <&ab8500_ldo_aux6_reg>;
+            reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+            backlight = <&gpio_bl>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 0000000000..377a05d48a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+  with Static RAM for content retention in command mode and also supports
+  video mode with VESA Frame Buffer Compression or Display Stream Compression
+  on single, or dual dsi port(s).
+  This DDIC is also capable of upscaling an input image to the panel's native
+  resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+  either bilinear interpolation or pixel duplication.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls055d1sx04
+      - const: novatek,nt35950
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35950 panel driver. The compatible
+      string determines how the NT35950 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35950 compatible shall
+      always be provided as a fallback.
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  avdd-supply:
+    description: positive boost supply regulator
+  avee-supply:
+    description: negative boost supply regulator
+  dvdd-supply:
+    description: regulator that supplies the digital voltage
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  backlight: true
+  ports: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - avdd-supply
+  - avee-supply
+  - dvdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            dvdd-supply = <&disp_dvdd_vreg>;
+            vddio-supply = <&vreg_l14a_1p85>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 0000000000..5f7e4c4860
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+  panels. Support video mode panels from China Star Optoelectronics
+  Technology (CSOT) and BOE Technology.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - xiaomi,elish-boe-nt36523
+              - xiaomi,elish-csot-nt36523
+          - const: novatek,nt36523
+      - items:
+          - enum:
+              - lenovo,j606f-boe-nt36523w
+          - const: novatek,nt36523w
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA
+
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  reg: true
+  ports: true
+  rotation: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - reset-gpios
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l14a_1p88>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1{
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
new file mode 100644
index 0000000000..ae821f465e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672A based DSI display Panels
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description: |
+  The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi
+  panels.
+  Right now, support is added only for a Tianma FHD+ LCD display panel with a
+  resolution of 1080x2246. It is a video mode DSI panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - tianma,fhd-video
+      - const: novatek,nt36672a
+    description: This indicates the panel manufacturer of the panel that is
+      in turn using the NT36672A panel driver. This compatible string
+      determines how the NT36672A panel driver is configured for the indicated
+      panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  vddio-supply:
+    description: phandle of the regulator that provides the supply voltage
+      Power IC supply
+
+  vddpos-supply:
+    description: phandle of the positive boost supply regulator
+
+  vddneg-supply:
+    description: phandle of the negative boost supply regulator
+
+  reg: true
+  port: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tianma,fhd-video", "novatek,nt36672a";
+            reg = <0>;
+            vddio-supply = <&vreg_l14a_1p88>;
+            vddpos-supply = <&lab>;
+            vddneg-supply = <&ibb>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+            port {
+                tianma_nt36672a_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 0000000000..72463795e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+  - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+  This device can be used as bridge between a host controller and LCD panels.
+  Currently supported LCDs are:
+    - LCD-OLinuXino-4.3TS
+    - LCD-OLinuXino-5
+    - LCD-OLinuXino-7
+    - LCD-OLinuXino-10
+
+  The panel itself contains:
+    - AT24C16C EEPROM holding panel identification and timing requirements
+    - AR1021 resistive touch screen controller (optional)
+    - FT5x6 capacitive touch screen controller (optional)
+    - GT911/GT928 capacitive touch screen controller (optional)
+
+  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+  device information (id, serial, etc.) and timing requirements.
+
+  Touchscreen bingings can be found in these files:
+    - input/touchscreen/goodix.yaml
+    - input/touchscreen/edt-ft5x06.txt
+    - input/touchscreen/ar1021.txt
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: olimex,lcd-olinuxino
+
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@50 {
+            compatible = "olimex,lcd-olinuxino";
+            reg = <0x50>;
+            power-supply = <&reg_vcc5v0>;
+            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
new file mode 100644
index 0000000000..1e4f140f48
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+             The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+             a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: orisetech,otm8009a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "orisetech,otm8009a";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
new file mode 100644
index 0000000000..0a57a31f4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Display Panels
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This document defines device tree properties common to several classes of
+  display panels. It doesn't constitute a device tree binding specification by
+  itself but is meant to be referenced by device tree bindings.
+
+  When referenced from panel device tree bindings the properties defined in this
+  document are defined as follows. The panel device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+properties:
+  # Descriptive Properties
+  width-mm:
+    description:
+      Specifies the width of the physical area where images are displayed. This
+      property is expressed in millimeters and rounded to the closest unit.
+
+  height-mm:
+    description:
+      Specifies the height of the physical area where images are displayed. This
+      property is expressed in millimeters and rounded to the closest unit.
+
+  label:
+    description: |
+      The label property specifies a symbolic name for the panel as a
+      string suitable for use by humans. It typically contains a name inscribed
+      on the system (e.g. as an affixed label) or specified in the system's
+      documentation (e.g. in the user's manual).
+
+      If no such name exists, and unless the property is mandatory according to
+      device tree bindings, it shall rather be omitted than constructed of
+      non-descriptive information. For instance an LCD panel in a system that
+      contains a single panel shall not be labelled "LCD" if that name is not
+      inscribed on the system or used in a descriptive fashion in system
+      documentation.
+
+  rotation:
+    description:
+      Display rotation in degrees counter clockwise (0,90,180,270)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 90, 180, 270]
+
+  # Display Timings
+  panel-timing:
+    description:
+      Most display panels are restricted to a single resolution and
+      require specific display timings. The panel-timing subnode expresses those
+      timings.
+    $ref: panel-timing.yaml#
+
+  display-timings:
+    description:
+      Some display panels support several resolutions with different timings.
+      The display-timings bindings supports specifying several timings and
+      optionally specifying which is the native mode.
+    $ref: display-timings.yaml#
+
+  # Connectivity
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some panels expose EDID information through an I2C-compatible
+      bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a
+      phandle to the system I2C controller connected to that bus.
+
+  no-hpd:
+    type: boolean
+    description:
+      This panel is supposed to communicate that it's ready via HPD
+      (hot plug detect) signal, but the signal isn't hooked up so we should
+      hardcode the max delay from the panel spec when powering up the panel.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+      than a dedicated HPD pin the pin can be specified here.
+
+  # Control I/Os
+
+  # Many display panels can be controlled through pins driven by GPIOs. The nature
+  # and timing of those control signals are device-specific and left for panel
+  # device tree bindings to specify. The following GPIO specifiers can however be
+  # used for panels that implement compatible control signals.
+
+  enable-gpios:
+    maxItems: 1
+    description: |
+      Specifier for a GPIO connected to the panel enable control signal. The
+      enable signal is active high and enables operation of the panel. This
+      property can also be used for panels implementing an active low power down
+      signal, which is a negated version of the enable signal. Active low enable
+      signals (or active high power down signals) can be supported by inverting
+      the GPIO specifier polarity flag.
+
+      Note that the enable signal control panel operation only and must not be
+      confused with a backlight enable signal.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifier for a GPIO connected to the panel reset control signal.
+      The reset signal is active low and resets the panel internal logic
+      while active. Active high reset signals can be supported by inverting the
+      GPIO specifier polarity flag.
+
+  te-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the tearing effect synchronization signal.
+      The tearing effect signal is active high. Active low signals can be
+      supported by inverting the GPIO specifier polarity flag.
+
+  # Power
+  power-supply:
+    description:
+      Display panels require power to be supplied. While several panels need
+      more than one power supply with panel-specific constraints governing the
+      order and timings of the power supplies, in many cases a single power
+      supply is sufficient, either because the panel has a single power rail, or
+      because all its power rails can be driven by the same supply. In that case
+      the power-supply property specifies the supply powering the panel as a
+      phandle to a regulator.
+
+  # Backlight
+
+  # Most display panels include a backlight. Some of them also include a backlight
+  # controller exposed through a control bus such as I2C or DSI. Others expose
+  # backlight control through GPIO, PWM or other signals connected to an external
+  # backlight controller.
+
+  backlight:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      For panels whose backlight is controlled by an external backlight
+      controller, this property contains a phandle that references the
+      controller.
+
+dependencies:
+  width-mm: [ height-mm ]
+  height-mm: [ width-mm ]
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
new file mode 100644
index 0000000000..dae0676b5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dpi.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MIPI DPI Panel
+
+maintainers:
+  - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    description:
+      Shall contain a panel specific compatible and "panel-dpi"
+      in that order.
+    items:
+      - {}
+      - const: panel-dpi
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+required:
+  - panel-timing
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "startek,startek-kd050c", "panel-dpi";
+        label = "osddisplay";
+        power-supply = <&vcc_supply>;
+        backlight = <&backlight>;
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+        panel-timing {
+            clock-frequency = <9200000>;
+            hactive = <800>;
+            vactive = <480>;
+            hfront-porch = <8>;
+            hback-porch = <4>;
+            hsync-len = <41>;
+            vback-porch = <2>;
+            vfront-porch = <4>;
+            vsync-len = <10>;
+
+            hsync-active = <0>;
+            vsync-active = <0>;
+            de-active = <1>;
+            pixelclk-active = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 0000000000..f8dc9929e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  are usually driven in command mode. If no backlight is
+  referenced via the optional backlight property, the DSI
+  panel is assumed to have native backlight support.
+  The panel may use an OF graph binding for the association
+  to the display, or it may be a direct child node of the
+  display.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    items:
+      - enum:
+          - motorola,droid4-panel        # Panel from Motorola Droid4 phone
+          - nokia,himalaya               # Panel from Nokia N950 phone
+          - tpo,taal                     # Panel from OMAP4 SDP board
+      - const: panel-dsi-cm              # Generic DSI command mode panel compatible fallback
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply:
+    description:
+      Display panels require power to be supplied. While several panels need
+      more than one power supply with panel-specific constraints governing the
+      order and timings of the power supplies, in many cases a single power
+      supply is sufficient, either because the panel has a single power rail, or
+      because all its power rails can be driven by the same supply. In that case
+      the vddi-supply property specifies the supply powering the panel as a
+      phandle to a regulator.
+
+  vpnl-supply:
+    description:
+      When the display panel needs a second power supply, this property can be
+      used in addition to vddi-supply. Both supplies will be enabled at the
+      same time before the panel is being accessed.
+
+  width-mm: true
+  height-mm: true
+  label: true
+  rotation: true
+  panel-timing: true
+  port: true
+  reset-gpios: true
+  te-gpios: true
+  backlight: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tpo,taal", "panel-dsi-cm";
+            reg = <0>;
+            reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp.yaml b/Documentation/devicetree/bindings/display/panel/panel-edp.yaml
new file mode 100644
index 0000000000..bb0cf6827e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-edp.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file can be used to indicate that an eDP panel is connected
+  to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+  actually specifying exactly what panel is connected. This is useful for
+  the case that more than one different panel could be connected to the
+  board, either for second-sourcing purposes or to support multiple SKUs
+  with different LCDs that hook up to a common board.
+
+  As per above, a requirement for using this binding is that the panel is
+  represented under the DP AUX bus. This means that we can use any
+  information provided by the DP AUX bus (including the EDID) to identify
+  the panel. We can use this to identify display size, resolution, and
+  timings among other things.
+
+  One piece of information about eDP panels that is typically _not_
+  provided anywhere on the DP AUX bus is the power sequencing timings.
+  This is the reason why, historically, we've always had to explicitly
+  list eDP panels. We solve that here with two tricks. The "worst case"
+  power on timings for any panels expected to be connected to a board are
+  specified in these bindings. Once we've powered on, it's expected that
+  the operating system will lookup the panel in a table (based on EDID
+  information) to figure out other power sequencing timings.
+
+  eDP panels in general can have somewhat arbitrary power sequencing
+  requirements. However, even though it's arbitrary in general, the
+  vast majority of panel datasheets have a power sequence diagram that
+  looks the exactly the same as every other panel. Each panel datasheet
+  cares about different timings in this diagram but the fact that the
+  diagram is so similar means we can come up with a single driver to
+  handle it.
+
+  These diagrams all look roughly like this, sometimes labeled with
+  slightly different numbers / lines but all pretty much the same
+  sequence. This is because much of this diagram comes straight from
+  the eDP Standard.
+
+                __________________________________________________
+  Vdd       ___/:                                                :\____       /
+          _/    :                                                :     \_____/
+           :<T1>:<T2>:                                 :<--T10-->:<T11>:<T12>:
+                :    +-----------------------+---------+---------+
+  eDP     -----------+ Black video           | Src vid | Blk vid +
+  Display       :    +-----------------------+---------+---------+
+                :     _______________________:_________:_________:
+  HPD           :<T3>|                       :         :         |
+          ___________|                       :         :         |_____________
+                     :                       :         :         :
+  Sink               +-----------------------:---------:---------+
+  AUX CH  -----------+ AUX Ch operational    :         :         +-------------
+                     +-----------------------:---------:---------+
+                     :                       :         :         :
+                     :<T4>:             :<T7>:         :         :
+  Src main                +------+------+--------------+---------+
+  lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+                          +------+------+--------------+---------+
+                          : <T5> :<-T6->:<-T8->:       :
+                                               :__:<T9>:
+  LED_EN                                       |  |
+          _____________________________________|  |____________________________
+                                               :  :
+                                     __________:__:_
+  PWM                               |          :  : |
+          __________________________|          :  : |__________________________
+                                    :          :  : :
+                       _____________:__________:__:_:______
+  Bklight         ____/:            :          :  : :     :\____
+  power   _______/     :<---T13---->:          :  : :<T16>:     \______________
+  (Vbl)          :<T17>:<---------T14--------->:  :<-T15->:<T18>:
+
+  The above looks fairly complex but, as per above, each panel only cares
+  about a subset of those timings.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: edp-panel
+
+  hpd-reliable-delay-ms:
+    description:
+      A fixed amount of time that must be waited after powering on the
+      panel's power-supply before the HPD signal is a reliable way to know
+      when the AUX channel is ready. This is useful for panels that glitch
+      the HPD at the start of power-on. This value is not needed if HPD is
+      always reliable for all panels that might be connected.
+
+  hpd-absent-delay-ms:
+    description:
+      The panel specifies that HPD will be asserted this many milliseconds
+      from power on (timing T3 in the diagram above). If we have no way to
+      measure HPD then a fixed delay of this many milliseconds can be used.
+      This can also be used as a timeout when waiting for HPD. Does not
+      include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+      and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+      then we know HPD would assert in the next 120 ms. This value is not
+      needed if HPD hooked up, either through a GPIO in the panel node or
+      hooked up directly to the eDP controller.
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "edp-panel";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+            hpd-reliable-delay-ms = <15>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 0000000000..9f1016551e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: panel-lvds
+
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - advantech,idk-1110wr
+            - advantech,idk-2121wr
+            - innolux,ee101ia-01d
+            - mitsubishi,aa104xd12
+            - mitsubishi,aa121td01
+            - sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - auo,b101ew05
+          # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
+          - chunghwa,claa070wp03xg
+          # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+          - hannstar,hsd101pww2
+          # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
+          - hydis,hv070wx2-1e0
+          - tbs,a711-panel
+
+      - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 0000000000..e808215cb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+      Called power-supply in this binding.
+    - Vddi: Logic level supply for interface signals
+      Called io-supply in this binding.
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - saef,sftc154b
+          - sainsmart18
+          - shineworld,lh133k
+      - const: panel-mipi-dbi-spi
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+  io-supply:
+    description: |
+      Logic level supply for interface signals (Vddi).
+      No need to set if this is the same as power-supply.
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
new file mode 100644
index 0000000000..73674baea7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the DSI panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+properties:
+
+  compatible:
+    enum:
+      # compatible must be listed in alphabetical order, ordered by compatible.
+      # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+      - auo,b080uan01
+        # Boe Corporation 8.0" WUXGA TFT LCD panel
+      - boe,tv080wum-nl0
+        # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+      - innolux,p079zca
+        # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+      - jdi,fhd-r63452
+        # Khadas TS050 5" 1080x1920 LCD panel
+      - khadas,ts050
+        # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+      - kingdisplay,kd097d04
+        # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+      - lg,acx467akm-7
+        # LG Corporation 7" WXGA TFT LCD panel
+      - lg,ld070wx3-sl01
+        # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2587-53ts
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f004b00
+        # Panasonic 10" WUXGA TFT LCD panel
+      - panasonic,vvx10f034n00
+        # Samsung s6e3fc2x01 1080x2340 AMOLED panel
+      - samsung,s6e3fc2x01
+        # Samsung sofef00 1080x2280 AMOLED panel
+      - samsung,sofef00
+        # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel
+      - tdo,tl070wsh30
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+  vddio-supply: true
+
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - samsung,s6e3fc2x01
+            - samsung,sofef00
+    then:
+      properties:
+        power-supply: false
+      required:
+        - vddio-supply
+    else:
+      properties:
+        vddio-supply: false
+      required:
+        - power-supply
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "panasonic,vvx10f034n00";
+        reg = <0>;
+        power-supply = <&vcc_lcd_reg>;
+
+        port {
+          panel: endpoint {
+            remote-endpoint = <&ltdc_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
new file mode 100644
index 0000000000..25b4589d4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -0,0 +1,378 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple panels with one power supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the simple (dumb) panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
+      - ampire,am-1280800n3tzqw-t00h
+        # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+      - ampire,am-480272h3tmqw-t01h
+        # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+      - ampire,am-800480l1tmqw-t00h
+        # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+      - ampire,am800480r3tmqwa1h
+        # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+      - ampire,am800600p5tmqw-tb8h
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101aw03
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101ean01
+        # AU Optronics Corporation 10.1" WXGA TFT LCD panel
+      - auo,b101xtn01
+        # AUO B116XAK01 eDP TFT LCD panel
+      - auo,b116xa01
+        # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+      - auo,b116xw03
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133han05
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133htn01
+        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+      - auo,b133xtn01
+        # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
+      - auo,b140han06
+        # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+      - auo,g070vvn01
+        # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+      - auo,g101evn010
+        # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+      - auo,g104sn02
+        # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
+      - auo,g121ean01
+        # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+      - auo,g133han01
+        # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
+      - auo,g156xtn01
+        # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+      - auo,g185han01
+        # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+      - auo,g190ean01
+        # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+      - auo,p320hvn03
+        # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+      - auo,t215hvn01
+        # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+      - avic,tm070ddh03
+        # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+      - boe,ev121wxm-n10-1850
+        # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+      - boe,hv070wsa-100
+        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+      - boe,nv101wxmn51
+        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv110wtm-n61
+        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+      - boe,nv133fhm-n61
+        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv133fhm-n62
+        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+      - boe,nv140fhmn49
+        # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
+      - cdtech,s043wq26h-ct7
+        # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
+      - cdtech,s070pws19hp-fc21
+        # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel
+      - cdtech,s070swv29hg-dc44
+        # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
+      - cdtech,s070wv95-ct16
+        # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
+      - chefree,ch101olhlwh-002
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wa01a
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb01
+        # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+      - chunghwa,claa101wb03
+        # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,fg040346dsswbg04
+        # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+      - dataimage,fg1001l0dsswmg01
+        # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,scf0700c48ggu18
+        # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
+      - dlc,dlc1010gig
+        # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
+      - edt,et035012dm6
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+      - edt,et057090dhu
+      - edt,et070080dh6
+        # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+        # capacitive multitouch
+      - edt,etm0350g0dh6
+        # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch
+      - edt,etm043080dh6gp
+        # Emerging Display Technology Corp. 480x272 TFT Display
+      - edt,etm0430g0dh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same as ETM0700G0DH6 but with inverted pixel clock.
+      - edt,etm070080bdh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same timings as the ETM0700G0DH6, but with resistive touch.
+      - edt,etm070080dh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+        # Same display as the ETM0700G0BDH6, but with changed hardware for the
+        # backlight and the touch interface.
+      - edt,etm070080edh6
+      - edt,etm0700g0bdh6
+        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+      - edt,etm0700g0dh6
+      - edt,etm0700g0edh6
+        # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+      - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+        # capacitive touch
+      - edt,etmv570g2dhu
+        # E Ink VB3300-KCA
+      - eink,vb3300-kca
+        # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
+      - evervision,vgg804821
+        # Foxlink Group 5" WVGA TFT LCD panel
+      - foxlink,fl500wvr00-a0t
+        # Frida FRD350H54004 3.5" QVGA TFT LCD panel
+      - frida,frd350h54004
+        # FriendlyELEC HD702E 800x1280 LCD panel
+      - friendlyarm,hd702e
+        # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+      - giantplus,gpg48273qs5
+        # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
+      - giantplus,gpm940b0
+        # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+      - hannstar,hsd070pww1
+        # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+      - hannstar,hsd100pxn1
+        # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+      - hit,tx23d38vm0caa
+        # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
+      - ivo,m133nwf4-r0
+        # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
+      - innolux,at043tn24
+        # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+      - innolux,at070tn92
+        # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070ace-l01
+        # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070y2-l01
+        # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
+      - innolux,g070y2-t02
+        # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+      - innolux,g101ice-l01
+        # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+      - innolux,g121i1-l01
+        # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+      - innolux,g121x1-l03
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bca-ea1
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bge
+        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+      - innolux,n125hce-gn1
+        # InnoLux 15.6" FHD (1920x1080) TFT LCD panel
+      - innolux,g156hce-l01
+        # InnoLux 15.6" WXGA TFT LCD panel
+      - innolux,n156bge-l21
+        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+      - innolux,p120zdg-bf1
+        # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
+      - innolux,zj070na-01p
+        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+      - kingdisplay,kd116n21-30nv-a010
+        # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+      - koe,tx14d24vm1bpa
+        # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
+      - koe,tx26d202vm0bwa
+        # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+      - koe,tx31d200vm0baa
+        # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
+      - kyo,tcg070wvlq
+        # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+      - kyo,tcg121xglp
+        # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
+      - lemaker,bl035-rgb-002
+        # LG 7" (800x480 pixels) TFT LCD panel
+      - lg,lb070wv8
+        # LG Corporation 5" HD TFT LCD panel
+      - lg,lh500wx1-sd03
+        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+      - lg,lp079qx1-sp0v
+        # LG 9.7" (2048x1536 pixels) TFT LCD panel
+      - lg,lp097qx1-spa1
+        # LG 12.0" (1920x1280 pixels) TFT LCD panel
+      - lg,lp120up1
+        # LG 12.9" (2560x1700 pixels) TFT LCD panel
+      - lg,lp129qe
+        # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
+      - logictechno,lt161010-2nhc
+        # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
+      - logictechno,lt161010-2nhr
+        # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod.
+      - logictechno,lt170410-2whc
+        # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module
+      - logictechno,lttd800480070-l2rt
+        # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
+      - logictechno,lttd800480070-l6wh-rt
+        # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+      - mitsubishi,aa070mc01-ca1
+        # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700s4t-6
+        # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+      - multi-inno,mi0800ft-9
+        # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
+      - multi-inno,mi1010ait-1cp
+        # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
+      - nec,nl12880bc20-05
+        # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+      - nec,nl4827hc19-05b
+        # Netron-DY E231732 7.0" WSVGA TFT LCD panel
+      - netron-dy,e231732
+        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+      - neweast,wjfh116008a
+        # Newhaven Display International 480 x 272 TFT LCD panel
+      - newhaven,nhd-4.3-480272ef-atxl
+        # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+      - nlt,nl192108ac18-02d
+        # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+      - nvd,9128
+        # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+      - okaya,rs800480t-7x0gp
+        # Olimex 4.3" TFT LCD panel
+      - olimex,lcd-olinuxino-43-ts
+        # On Tat Industrial Company 7" DPI TFT panel.
+      - ontat,yx700wv03
+        # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
+      - ortustech,com37h3m05dtc
+        # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+      - ortustech,com37h3m99dtc
+        # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
+      - ortustech,com43h4m85ulc
+        # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+      - osddisplays,osd070t1718-19ts
+        # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
+      - osddisplays,osd101t2045-53ts
+        # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+      - powertip,ph800480t013-idf02
+        # QiaoDian XianShi Corporation 4"3 TFT LCD panel
+      - qiaodian,qd43003c0-40
+        # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
+      - qishenglong,gopher2b-lcd
+        # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
+      - rocktech,rk101ii01d-ct
+        # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+      - rocktech,rk070er9427
+        # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+      - rocktech,rk043fn48h
+        # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+      - samsung,atna33xc20
+        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+      - samsung,lsn122dl01-c01
+        # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+      - samsung,ltl101al01
+        # Samsung Electronics 10.1" WSVGA TFT LCD panel
+      - samsung,ltn101nt05
+        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+      - samsung,ltn140at29-301
+        # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
+      - satoz,sat050at40h12r2
+        # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+      - sharp,lq035q7db03
+        # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+      - sharp,lq070y3dg3b
+        # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
+      - sharp,lq101k1ly04
+        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+      - sharp,lq123p1jx31
+        # Sharp 14" (1920x1080 pixels) TFT LCD panel
+      - sharp,lq140m1jw46
+        # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
+      - sharp,ls020b1dd01d
+        # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
+      - shelly,sca07010-bfn-lnn
+        # Starry KR070PE2T 7" WVGA TFT LCD panel
+      - starry,kr070pe2t
+        # Starry 12.2" (1920x1200 pixels) TFT LCD panel
+      - starry,kr122ea0sra
+        # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+      - startek,kd070wvfpa
+        # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+      - team-source-display,tst043015cmhx
+        # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+      - tianma,tm070jdhg30
+        # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
+      - tianma,tm070jvhg33
+        # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
+      - tianma,tm070rvhg71
+        # Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+      - toshiba,lt089ac29000
+        # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch
+      - tpk,f07a-0102
+        # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch
+      - tpk,f10a-0102
+        # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
+        # Supported are LVDS versions (-11T, -19T) and parallel ones
+        # (-T, -1T, -7T, -20T).
+      - urt,umsh-8596md-t
+      - urt,umsh-8596md-1t
+      - urt,umsh-8596md-7t
+      - urt,umsh-8596md-11t
+      - urt,umsh-8596md-19t
+      - urt,umsh-8596md-20t
+        # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel
+      - vivax,tpc9150-panel
+        # VXT 800x480 color TFT LCD panel
+      - vxt,vl050-8048nt-c01
+        # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
+      - winstar,wf35ltiacd
+        # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
+      - yes-optoelectronics,ytc700tlag-05-201c
+
+  backlight: true
+  ddc-i2c-bus: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel_rgb: panel-rgb {
+      compatible = "ampire,am-480272h3tmqw-t01h";
+      power-supply = <&vcc_lcd_reg>;
+
+      port {
+        panel_in_rgb: endpoint {
+          remote-endpoint = <&ltdc_out_rgb>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
new file mode 100644
index 0000000000..aea69b84ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: panel timing
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  There are different ways of describing the timing data of a panel. The
+  devicetree representation corresponds to the one commonly found in datasheets
+  for panels.
+
+  The parameters are defined as seen in the following illustration.
+
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vsync_len                   |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vback_porch                 |          |
+  |       |          |        v                            |          |
+  +-------+----------#######################################----------+
+  |       |          #        ^                            #          |
+  |       |          #        |                            #          |
+  | hsync |  hback   #        |                            #  hfront  |
+  |  len  |   porch  #        |       hactive              #  porch   |
+  |<----->|<-------->#<-------+--------------------------->#<-------->|
+  |       |          #        |                            #          |
+  |       |          #        |vactive                     #          |
+  |       |          #        |                            #          |
+  |       |          #        v                            #          |
+  +-------+----------#######################################----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vfront_porch                |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
+
+
+  The following is the panel timings shown with time on the x-axis.
+  This matches the timing diagrams often found in data sheets.
+
+              Active                 Front           Sync           Back
+              Region                 Porch                          Porch
+  <-----------------------><----------------><-------------><-------------->
+    //////////////////////|
+   ////////////////////// |
+  //////////////////////  |..................               ................
+                                             _______________
+
+  Timing can be specified either as a typical value or as a tuple
+  of min, typ, max values.
+
+properties:
+
+  clock-frequency:
+    description: Panel clock in Hz
+
+  hactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Horizontal panel resolution in pixels
+
+  vactive:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vertical panel resolution in pixels
+
+  hfront-porch:
+    description: Horizontal front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  hback-porch:
+    description: Horizontal back porch timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  hsync-len:
+    description: Horizontal sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of pixels
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of pixels
+
+  vfront-porch:
+    description: Vertical front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  vback-porch:
+    description: Vertical back porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  vsync-len:
+    description: Vertical sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    oneOf:
+      - maxItems: 1
+        items:
+          description: typical number of lines
+      - minItems: 3
+        maxItems: 3
+        items:
+          description: min, typ, max number of lines
+
+  hsync-active:
+    description: |
+      Horizontal sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  vsync-active:
+    description: |
+      Vertical sync pulse.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  de-active:
+    description: |
+      Data enable.
+      0 selects active low, 1 selects active high.
+      If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  pixelclk-active:
+    description: |
+      Data driving on rising or falling edge.
+      Use 0 to drive pixel data on falling edge and
+      sample data on rising edge.
+      Use 1 to drive pixel data on rising edge and
+      sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  syncclk-active:
+    description: |
+      Drive sync on rising or sample sync on falling edge.
+      If not specified then the setup is as specified by pixelclk-active.
+      Use 0 to drive sync on falling edge and
+      sample sync on rising edge of pixel clock.
+      Use 1 to drive sync on rising edge and
+      sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  interlaced:
+    type: boolean
+    description: Enable interlaced mode
+
+  doublescan:
+    type: boolean
+    description: Enable double scan mode
+
+  doubleclk:
+    type: boolean
+    description: Enable double clock mode
+
+required:
+  - clock-frequency
+  - hactive
+  - vactive
+  - hfront-porch
+  - hback-porch
+  - hsync-len
+  - vfront-porch
+  - vback-porch
+  - vsync-len
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml
new file mode 100644
index 0000000000..ccd3623b49
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/pda,91-00156-a0.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/pda,91-00156-a0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDA 91-00156-A0 5.0" WVGA TFT LCD panel
+
+maintainers:
+  - Cristian Birsan <cristian.birsan@microchip.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: pda,91-00156-a0
+
+  power-supply: true
+  backlight: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - backlight
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml
new file mode 100644
index 0000000000..22a083f7bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raspberrypi,7inch-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The official 7" (800x480) Raspberry Pi touchscreen
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  This DSI panel contains:
+
+  - TC358762 DSI->DPI bridge
+  - Atmel microcontroller on I2C for power sequencing the DSI bridge and
+    controlling backlight
+  - Touchscreen controller on I2C for touch input
+
+  and this binding covers the DSI display parts but not its touch input.
+
+properties:
+  compatible:
+    const: raspberrypi,7inch-touchscreen-panel
+
+  reg:
+    const: 0x45
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |+
+    dsi1: dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      port {
+        dsi_out_port: endpoint {
+          remote-endpoint = <&panel_dsi_port>;
+        };
+      };
+    };
+
+    i2c_dsi: i2c {
+      compatible = "i2c-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      scl-gpios = <&gpio 28 0>;
+      sda-gpios = <&gpio 29 0>;
+
+      lcd@45 {
+        compatible = "raspberrypi,7inch-touchscreen-panel";
+        reg = <0x45>;
+
+        port {
+          panel_dsi_port: endpoint {
+            remote-endpoint = <&dsi_out_port>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
new file mode 100644
index 0000000000..d62fd692bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+maintainers:
+  - Robert Chiras <robert.chiras@nxp.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: raydium,rm67191
+
+  reg: true
+  port: true
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+
+  dsi-lanes:
+    description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [3, 4]
+
+  v3p3-supply:
+    description: phandle to 3.3V regulator that powers the VDD_3V3 pin
+
+  v1p8-supply:
+    description: phandle to 1.8V regulator that powers the VDD_1V8 pin
+
+  video-mode:
+    description: |
+      0 - burst-mode
+      1 - non-burst with sync event
+      2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - dsi-lanes
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "raydium,rm67191";
+            reg = <0>;
+            reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+            dsi-lanes = <4>;
+            width-mm = <68>;
+            height-mm = <121>;
+            video-mode = <1>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
new file mode 100644
index 0000000000..46fe1014eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+  The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+  panel connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    const: raydium,rm68200
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+  - reg
+
+examples:
+  - |
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "raydium,rm68200";
+        reg = <0>;
+        reset-gpios = <&gpiof 15 0>;
+        power-supply = <&v1v8>;
+        backlight = <&pwm_backlight>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
new file mode 100644
index 0000000000..5ea74426b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Guido Gŭnther <agx@sigxcpu.org>
+
+description:
+  Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+  connected using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
+      # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+      - rocktech,jh057n00900
+      # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+      - xingbangda,xbd599
+
+  port: true
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  reset-gpios: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - iovcc-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
new file mode 100644
index 0000000000..95ce22c678
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ronbo RB070D30 DSI Display Panel
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: ronbo,rb070d30
+
+  reg:
+    description: MIPI-DSI virtual channel
+
+  power-gpios:
+    description: GPIO used for the power pin
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for the reset pin
+    maxItems: 1
+
+  shlr-gpios:
+    description: GPIO used for the shlr pin (horizontal flip)
+    maxItems: 1
+
+  updn-gpios:
+    description: GPIO used for the updn pin (vertical flip)
+    maxItems: 1
+
+  vcc-lcd-supply:
+    description: Power regulator
+
+  backlight:
+    description: Backlight used by the panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - power-gpios
+  - reg
+  - reset-gpios
+  - shlr-gpios
+  - updn-gpios
+  - vcc-lcd-supply
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
new file mode 100644
index 0000000000..ccc482570d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+  - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
+properties:
+  compatible:
+    enum:
+        # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+      - samsung,s6e63j0x03
+        # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+      - samsung,s6e3ha2
+        # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+      - samsung,s6e3hf2
+
+  reg: true
+  reset-gpios: true
+  enable-gpios: true
+  te-gpios: true
+
+  vdd3-supply:
+    description: I/O voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e3ha2";
+            reg = <0>;
+            vdd3-supply = <&ldo27_reg>;
+            vci-supply = <&ldo28_reg>;
+            reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+            te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
new file mode 100644
index 0000000000..58fa073ce2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,ams495qa01
+
+  reg: true
+  reset-gpios:
+    description: reset gpio, must be GPIO_ACTIVE_LOW
+  elvdd-supply:
+    description: regulator that supplies voltage to the panel display
+  enable-gpios: true
+  port: true
+  vdd-supply:
+    description: regulator that supplies voltage to panel logic
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,ams495qa01";
+            reg = <0>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_3v3>;
+
+            port {
+                mipi_in_panel: endpoint {
+                  remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
new file mode 100644
index 0000000000..c0fabeb386
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+maintainers:
+  - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,ld9040
+
+  display-timings: true
+  port: true
+  reg: true
+  reset-gpios: true
+
+  vdd3-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+  power-on-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: delay after turning regulators on [ms]
+
+  reset-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: delay after reset sequence [ms]
+
+  panel-width-mm:
+    description: physical panel width [mm]
+
+  panel-height-mm:
+    description: physical panel height [mm]
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+  - display-timings
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lcd@0 {
+            compatible = "samsung,ld9040";
+
+            reg = <0>;
+            vdd3-supply = <&ldo7_reg>;
+            vci-supply = <&ldo17_reg>;
+            reset-gpios = <&gpy4 5 0>;
+            spi-max-frequency = <1200000>;
+            spi-cpol;
+            spi-cpha;
+            power-on-delay = <10>;
+            reset-delay = <10>;
+            panel-width-mm = <90>;
+            panel-height-mm = <154>;
+
+            display-timings {
+                timing {
+                    clock-frequency = <23492370>;
+                    hactive = <480>;
+                    vactive = <800>;
+                    hback-porch = <16>;
+                    hfront-porch = <16>;
+                    vback-porch = <2>;
+                    vfront-porch = <28>;
+                    hsync-len = <2>;
+                    vsync-len = <1>;
+                    hsync-active = <0>;
+                    vsync-active = <0>;
+                    de-active = <0>;
+                    pixelclk-active = <0>;
+                };
+            };
+
+            port {
+                lcd_ep: endpoint {
+                    remote-endpoint = <&fimd_dpi_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
new file mode 100644
index 0000000000..70ffc88d2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS380KF01 display panel
+
+description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
+  Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
+  used with internal or external backlight control.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,lms380kf01
+
+  reg: true
+
+  interrupts:
+    description: provides an optional ESD (electrostatic discharge)
+      interrupt that signals abnormalities in the display hardware.
+      This can also be raised for other reasons like erroneous
+      configuration.
+    maxItems: 1
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 1200000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        compatible = "spi-gpio";
+        sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+        miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+        cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+        num-chipselects = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,lms380kf01";
+            spi-max-frequency = <1200000>;
+            spi-cpha;
+            spi-cpol;
+            reg = <0>;
+            vci-supply = <&lcd_3v0_reg>;
+            vccio-supply = <&lcd_1v8_reg>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
new file mode 100644
index 0000000000..5e77cee93f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS397KF04 display panel
+
+description: The datasheet claims this is based around a display controller
+  named DB7430 with a separate backlight controller.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,lms397kf04
+
+  reg: true
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    description: inherited as a SPI client node, the datasheet specifies
+      maximum 300 ns minimum cycle which gives around 3 MHz max frequency
+    maximum: 3000000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      compatible = "spi-gpio";
+      sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+      miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+      mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+      num-chipselects = <1>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      panel@0 {
+        compatible = "samsung,lms397kf04";
+        spi-max-frequency = <3000000>;
+        spi-cpha;
+        spi-cpol;
+        reg = <0>;
+        vci-supply = <&lcd_3v0_reg>;
+        vccio-supply = <&lcd_1v8_reg>;
+        reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        backlight = <&ktd259>;
+
+        port {
+          panel_in: endpoint {
+            remote-endpoint = <&display_out>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
new file mode 100644
index 0000000000..66d147496b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D16D0 4" 864x480 AMOLED panel
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d16d0
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+  vdd1-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - vdd1-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6d16d0";
+            reg = <0>;
+            vdd1-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
new file mode 100644
index 0000000000..d273faf444
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D27A1 display panel
+
+description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
+  Displays (SMD).
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d27a1
+
+  reg: true
+
+  interrupts:
+    description: provides an optional ESD (electrostatic discharge)
+      interrupt that signals abnormalities in the display hardware.
+      This can also be raised for other reasons like erroneous
+      configuration.
+    maxItems: 1
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 1200000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vci-supply
+  - vccio-supply
+  - spi-cpha
+  - spi-cpol
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        compatible = "spi-gpio";
+        sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+        miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+        cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+        num-chipselects = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,s6d27a1";
+            spi-max-frequency = <1200000>;
+            spi-cpha;
+            spi-cpol;
+            reg = <0>;
+            vci-supply = <&lcd_3v0_reg>;
+            vccio-supply = <&lcd_1v8_reg>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 0000000000..45a236d2cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # 1280x800 LSL080AL02 panel
+          - samsung,lsl080al02
+          # 1024x768 LSL080AL03 panel
+          - samsung,lsl080al03
+          # 1024x768 LTL101AT01 panel
+          - samsung,ltl101at01
+      - const: samsung,s6d7aa0
+
+  reg: true
+
+  backlight:
+    description:
+      Backlight to use for the panel. If this property is set on panels
+      that have DSI-based backlight control (LSL080AL03 and LTL101AT01),
+      it overrides the DSI-based backlight.
+
+  reset-gpios:
+    description: Reset GPIO pin, usually GPIO_ACTIVE_LOW.
+
+  power-supply:
+    description:
+      Main power supply for the panel; the exact voltage differs between
+      panels, and is usually somewhere around 3.3-5v.
+
+  vmipi-supply:
+    description: VMIPI supply, usually 1.8v.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+            reg = <0>;
+            power-supply = <&display_3v3_supply>;
+            reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
new file mode 100644
index 0000000000..6f1fc7469f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s6e63m0 AMOLED LCD panel
+
+maintainers:
+  - Jonathan Bakker <xc-racer2@live.ca>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/leds/backlight/common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e63m0
+
+  reg: true
+  reset-gpios: true
+  port: true
+  default-brightness: true
+  max-brightness: true
+
+  spi-3wire: true
+  spi-cpha: true
+  spi-cpol: true
+
+  vdd3-supply:
+    description: VDD regulator
+
+  vci-supply:
+    description: VCI regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - vdd3-supply
+  - vci-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "samsung,s6e63m0";
+            reg = <0>;
+            reset-gpios = <&mp05 5 1>;
+            vdd3-supply = <&ldo12_reg>;
+            vci-supply = <&ldo11_reg>;
+            spi-max-frequency = <1200000>;
+
+            port {
+                lcd_ep: endpoint {
+                    remote-endpoint = <&fimd_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
new file mode 100644
index 0000000000..b749e9e906
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e88a0-ams452ef01
+  reg: true
+  port: true
+  reset-gpios: true
+  vdd3-supply:
+    description: core voltage supply
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - port
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            panel@0 {
+                    reg = <0>;
+
+                    compatible = "samsung,s6e88a0-ams452ef01";
+
+                    vdd3-supply = <&pm8916_l17>;
+                    vci-supply = <&reg_vlcd_vci>;
+                    reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
+                    port {
+                            panel_in: endpoint {
+                                    remote-endpoint = <&dsi0_out>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
new file mode 100644
index 0000000000..200fbf1c74
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+maintainers:
+  - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e8aa0
+
+  reg: true
+  reset-gpios: true
+  display-timings: true
+
+  vdd3-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+  power-on-delay:
+    description: delay after turning regulators on [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  reset-delay:
+    description: delay after reset sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  init-delay:
+    description: delay after initialization sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  panel-width-mm:
+    description: physical panel width [mm]
+
+  panel-height-mm:
+    description: physical panel height [mm]
+
+  flip-horizontal:
+    description: boolean to flip image horizontally
+    type: boolean
+
+  flip-vertical:
+    description: boolean to flip image vertically
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vdd3-supply
+  - vci-supply
+  - reset-gpios
+  - display-timings
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e8aa0";
+            reg = <0>;
+            vdd3-supply = <&vcclcd_reg>;
+            vci-supply = <&vlcd_reg>;
+            reset-gpios = <&gpy4 5 0>;
+            power-on-delay = <50>;
+            reset-delay = <100>;
+            init-delay = <100>;
+            panel-width-mm = <58>;
+            panel-height-mm = <103>;
+            flip-horizontal;
+            flip-vertical;
+
+            display-timings {
+                timing0: timing-0 {
+                    clock-frequency = <57153600>;
+                    hactive = <720>;
+                    vactive = <1280>;
+                    hfront-porch = <5>;
+                    hback-porch = <5>;
+                    hsync-len = <5>;
+                    vfront-porch = <13>;
+                    vback-porch = <1>;
+                    vsync-len = <2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
new file mode 100644
index 0000000000..1df3cbb51f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sii,43wvf1g
+
+  backlight: true
+  port: true
+
+  dvdd-supply:
+    description: 3v3 digital regulator
+
+  avdd-supply:
+    description: 5v analog regulator
+
+  enable-gpios: true
+
+required:
+  - compatible
+  - dvdd-supply
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "sii,43wvf1g";
+
+        backlight = <&backlight_display>;
+        dvdd-supply = <&reg_lcd_3v3>;
+        avdd-supply = <&reg_lcd_5v>;
+        port {
+            panel_in: endpoint {
+                remote-endpoint = <&display_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
new file mode 100644
index 0000000000..e32d9188a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sgd,gktw70sdae4se.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: sgd,gktw70sdae4se
+      - const: panel-lvds
+
+  data-mapping:
+    const: jeida-18
+
+  width-mm:
+    const: 153
+
+  height-mm:
+    const: 86
+
+  panel-timing: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - port
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+
+examples:
+  - |+
+    panel {
+      compatible = "sgd,gktw70sdae4se", "panel-lvds";
+
+      width-mm = <153>;
+      height-mm = <86>;
+
+      data-mapping = "jeida-18";
+
+      panel-timing {
+        clock-frequency = <32000000>;
+        hactive = <800>;
+        vactive = <480>;
+        hback-porch = <39>;
+        hfront-porch = <39>;
+        vback-porch = <29>;
+        vfront-porch = <13>;
+        hsync-len = <47>;
+        vsync-len = <2>;
+      };
+
+      port {
+        panel_in: endpoint {
+          remote-endpoint = <&lvds_encoder>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml
new file mode 100644
index 0000000000..fbb647eb33
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+
+maintainers:
+  - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ld-d5116z01b
+
+  power-supply: true
+  backlight: true
+  port: true
+  no-hpd: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
new file mode 100644
index 0000000000..57b44a0e76
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: |
+  This panel requires a dual-channel DSI host to operate. It supports two modes:
+  - left-right: each channel drives the left or right half of the screen
+  - even-odd: each channel drives the even or odd lines of the screen
+
+  Each of the DSI channels controls a separate DSI peripheral. The peripheral
+  driven by the first link (DSI-LINK1), left or even, is considered the primary
+  peripheral and controls the device. The 'link2' property contains a phandle
+  to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+  Note that in video mode the DSI-LINK1 interface always provides the left/even
+  pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+  is possible to program either link to drive the left/even or right/odd pixels
+  but for the sake of consistency this binding assumes that the same assignment
+  is chosen as for video mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: sharp,lq101r1sx03
+          - const: sharp,lq101r1sx01
+      - enum:
+          - sharp,lq101r1sx01
+
+  reg: true
+  power-supply: true
+  backlight: true
+
+  link2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to the DSI peripheral on the secondary link. Note that the
+      presence of this property marks the containing node as DSI-LINK1
+
+required:
+  - compatible
+  - reg
+
+if:
+  required:
+    - link2
+then:
+  required:
+    - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi0: dsi@fd922800 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xfd922800 0x200>;
+
+        panel: panel@0 {
+            compatible = "sharp,lq101r1sx01";
+            reg = <0>;
+
+            link2 = <&secondary>;
+
+            power-supply = <&power>;
+            backlight = <&backlight>;
+        };
+    };
+
+    dsi1: dsi@fd922a00 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xfd922a00 0x200>;
+
+        secondary: panel@0 {
+            compatible = "sharp,lq101r1sx01";
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
new file mode 100644
index 0000000000..92f2d12f4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,lq150x1lg11
+
+  power-supply: true
+  backlight: true
+
+  rlud-gpios:
+    maxItems: 1
+    description: |
+      GPIO for the RL/UD (rotate 180 degrees) pin.
+      If rlud-gpios and/or sellvds-gpios are not specified,
+      the RL/UD and/or SELLVDS pins are assumed to be handled
+      appropriately by the hardware.
+
+  sellvds-gpios:
+    maxItems: 1
+    description: |
+      GPIO for the SELLVDS pin.
+      If rlud-gpios and/or sellvds-gpios are not specified,
+      the RL/UD and/or SELLVDS pins are assumed to be handled
+      appropriately by the hardware.
+
+required:
+  - compatible
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel {
+        compatible = "sharp,lq150x1lg11";
+
+        power-supply = <&vcc_3v3_reg>;               /* VCC */
+
+        backlight = <&backlight>;
+        rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
+        sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
new file mode 100644
index 0000000000..8c47a9b0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SHARP LS037V7DW01 TFT-LCD panel
+
+description: |
+  This panel can have zero to five GPIOs to configure to change configuration
+  between QVGA and VGA mode and the scan direction. As these pins can be also
+  configured with external pulls, all the GPIOs are considered optional with holes
+  in the array.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls037v7dw01
+
+  label: true
+  enable-gpios: true
+  reset-gpios: true
+  port: true
+  power-supply: true
+
+  mode-gpios:
+    minItems: 1
+    maxItems: 3
+    description: |
+      GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
+      This panel can have zero to three GPIOs to configure to
+      change configuration between QVGA and VGA mode and the
+      scan direction. As these pins can be also configured
+      with external pulls, all the GPIOs are considered
+      optional with holes in the array.
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    lcd0: display {
+        compatible = "sharp,ls037v7dw01";
+        power-supply = <&lcd_3v3>;
+        enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;    /* gpio152, lcd INI */
+        reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;     /* gpio155, lcd RESB */
+        mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH        /* gpio154, lcd MO */
+                      &gpio1 2 GPIO_ACTIVE_HIGH         /* gpio2, lcd LR */
+                      &gpio1 3 GPIO_ACTIVE_HIGH>;       /* gpio3, lcd UD */
+
+        port {
+            lcd_in: endpoint {
+                remote-endpoint = <&dpi_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
new file mode 100644
index 0000000000..a90d0d8bf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+maintainers:
+  - Werner Johansson <werner.johansson@sonymobile.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls043t1le01-qhd
+
+  reg: true
+  backlight: true
+  reset-gpios: true
+  port: true
+
+  avdd-supply:
+    description: handle of the regulator that provides the supply voltage
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls043t1le01-qhd";
+            reg = <0>;
+            avdd-supply = <&pm8941_l22>;
+            backlight = <&pm8941_wled>;
+            reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
new file mode 100644
index 0000000000..271c097cc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 6.0" FullHD TFT LCD panel
+
+maintainers:
+  - Dmitry Baryskov <dmitry.baryshkov@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls060t1sx01
+
+  reg: true
+  backlight: true
+  reset-gpios: true
+  port: true
+
+  avdd-supply:
+    description: handle of the regulator that provides the positive supply voltage
+  avee-supply:
+    description: handle of the regulator that provides the negative supply voltage
+  vddi-supply:
+    description: handle of the regulator that provides the I/O supply voltage
+  vddh-supply:
+    description: handle of the regulator that provides the analog supply voltage
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls060t1sx01";
+            reg = <0>;
+            avdd-supply = <&pm8941_l22>;
+            backlight = <&backlight>;
+            reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
new file mode 100644
index 0000000000..4dc0cd4a6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7701 based LCD panels
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+  ST7701 designed for small and medium sizes of TFT LCD display, is
+  capable of supporting up to 480RGBX864 in resolution. It provides
+  several system interfaces like MIPI/RGB/SPI.
+
+  Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+  inbuilt ST7701 chip.
+
+  Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+  which has built-in ST7701 chip.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - densitron,dmt028vghmcmi-1a
+          - elida,kd50t048a
+          - techstar,ts8550b
+      - const: sitronix,st7701
+
+  reg:
+    description: DSI virtual channel used by that screen
+    maxItems: 1
+
+  VCC-supply:
+    description: analog regulator for MIPI circuit
+
+  IOVCC-supply:
+    description: I/O system regulator
+
+  port: true
+  reset-gpios: true
+  rotation: true
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - VCC-supply
+  - IOVCC-supply
+  - port
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "techstar,ts8550b", "sitronix,st7701";
+            reg = <0>;
+            VCC-supply = <&reg_dldo2>;
+            IOVCC-supply = <&reg_dldo2>;
+            reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
new file mode 100644
index 0000000000..ef162b51d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7789V RGB panel with SPI control bus
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - edt,et028013dma
+      - inanbo,t28cp45tn89-v17
+      - jasonic,jt240mhqs-hwt-ek-e3
+      - sitronix,st7789v
+
+  reg: true
+  reset-gpios: true
+  power-supply: true
+  backlight: true
+  port: true
+  rotation: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+  spi-rx-bus-width:
+    minimum: 0
+    maximum: 1
+
+  dc-gpios:
+    maxItems: 1
+    description: DCX pin, Display data/command selection pin in parallel interface
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sitronix,st7789v";
+            reg = <0>;
+            reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
+            backlight = <&pwm_bl>;
+            power-supply = <&power>;
+            rotation = <180>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&tcon0_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
new file mode 100644
index 0000000000..059cc6dbcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+  the Novatek NT35560 display controller. The only difference is that
+  the AKM is configured to use 10 pixels less in the Y axis than the
+  AKP.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sony,acx424akp
+      - sony,acx424akm
+  reg: true
+  reset-gpios: true
+  vddi-supply:
+    description: regulator that supplies the vddi voltage
+  enforce-video-mode: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
new file mode 100644
index 0000000000..98abdf4dde
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX565AKM SDI Panel
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: sony,acx565akm
+
+  label: true
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@2 {
+            compatible = "sony,acx565akm";
+            spi-max-frequency = <6000000>;
+            reg = <2>;
+
+            label = "lcd";
+            reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&sdi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml
new file mode 100644
index 0000000000..b6b885b4c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080
+  MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,td4353-jdi-tama
+
+  reg: true
+
+  backlight: true
+
+  vddio-supply:
+    description: VDDIO 1.8V supply
+
+  vsp-supply:
+    description: Positive 5.5V supply
+
+  vsn-supply:
+    description: Negative 5.5V supply
+
+  panel-reset-gpios:
+    description: Display panel reset pin
+
+  touch-reset-gpios:
+    description: Touch panel reset pin
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vsp-supply
+  - vsn-supply
+  - panel-reset-gpios
+  - touch-reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "sony,td4353-jdi-tama";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            vddio-supply = <&vreg_l14a_1p8>;
+            vsp-supply = <&lab>;
+            vsn-supply = <&ibb>;
+            panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+            touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 0000000000..9679729395
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+  can be found no Sony Xperia M4 phone.  The panel backlight is managed
+  through DSI link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,tulip-truly-nt35521
+
+  reg: true
+
+  positive5-supply:
+    description: Positive 5V supply
+
+  negative5-supply:
+    description: Negative 5V supply
+
+  reset-gpios: true
+
+  enable-gpios: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - positive5-supply
+  - negative5-supply
+  - reset-gpios
+  - enable-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,tulip-truly-nt35521";
+            reg = <0>;
+            positive5-supply = <&positive5_reg>;
+            negative5-supply = <&negative5_reg>;
+            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml
new file mode 100644
index 0000000000..d817f998cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel
+
+maintainers:
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: startek,kd070fhfid015
+
+  enable-gpios: true
+
+  iovcc-supply:
+    description: Reference to the regulator powering the panel IO pins.
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  reset-gpios: true
+
+  port: true
+
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - enable-gpios
+  - iovcc-supply
+  - reg
+  - reset-gpios
+  - port
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "startek,kd070fhfid015";
+            reg = <0>;
+            enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+            iovcc-supply = <&mt6357_vsim1_reg>;
+            power-supply = <&vsys_lcm_reg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
new file mode 100644
index 0000000000..fd668640af
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+maintainers:
+  - Nikita Kiryanov <nikita@compulab.co.il>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: startek,startek-kd050c
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  backlight: true
+  enable-gpios: true
+  height-mm: true
+  label: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  reset-gpios: true
+  width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml b/Documentation/devicetree/bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml
new file mode 100644
index 0000000000..9e5994417c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tfc,s9700rtwv43tr-01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD panel with resistive touch
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  The panel is found on TI AM335x-evm.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: tfc,s9700rtwv43tr-01b
+
+  enable-gpios: true
+  backlight: true
+  port: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml
new file mode 100644
index 0000000000..5c5a3b519e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ti,nspire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments NSPIRE Display Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,nspire-cx-lcd-panel
+      - ti,nspire-classic-lcd-panel
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "ti,nspire-cx-lcd-panel";
+        port {
+            panel_in: endpoint {
+                remote-endpoint = <&pads>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
new file mode 100644
index 0000000000..e8c8ee8d7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toppoly TD Panels
+
+maintainers:
+  - Marek Belisko <marek@goldelico.com>
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+        # Toppoly TD028TTEC1 Panel
+      - tpo,td028ttec1
+        # Toppoly TD043MTEA1 Panel
+      - tpo,td043mtea1
+
+  reg: true
+  label: true
+  reset-gpios: true
+  backlight: true
+  port: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "tpo,td043mtea1";
+            reg = <0>;
+            spi-max-frequency = <100000>;
+            spi-cpol;
+            spi-cpha;
+
+            label = "lcd";
+
+            reset-gpios = <&gpio7 7 0>;
+
+            port {
+                lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
new file mode 100644
index 0000000000..f0243d1961
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,tpg110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPO TPG110 Panel
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  This panel driver is a component that acts as an intermediary
+  between an RGB output and a variety of panels. The panel
+  driver is strapped up in electronics to the desired resolution
+  and other properties, and has a control interface over 3WIRE
+  SPI. By talking to the TPG110 over SPI, the strapped properties
+  can be discovered and the hardware is therefore mostly
+  self-describing.
+
+         +--------+
+  SPI -> |  TPO   | -> physical display
+  RGB -> | TPG110 |
+         +--------+
+
+  If some electrical strap or alternate resolution is desired,
+  this can be set up by taking software control of the display
+  over the SPI interface. The interface can also adjust
+  for properties of the display such as gamma correction and
+  certain electrical driving levels.
+
+  The TPG110 does not know the physical dimensions of the panel
+  connected, so this needs to be specified in the device tree.
+
+  It requires a GPIO line for control of its reset line.
+
+  The serial protocol has line names that resemble I2C but the
+  protocol is not I2C but 3WIRE SPI.
+
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ste,nomadik-nhk15-display
+          - const: tpo,tpg110
+      - const: tpo,tpg110
+
+  reg: true
+
+  grestb-gpios:
+    maxItems: 1
+    description: panel reset GPIO
+
+  spi-3wire: true
+
+  spi-max-frequency:
+    const: 3000000
+
+required:
+  - compatible
+  - reg
+  - grestb-gpios
+  - width-mm
+  - height-mm
+  - spi-3wire
+  - spi-max-frequency
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel: display@0 {
+        compatible = "tpo,tpg110";
+        reg = <0>;
+        spi-3wire;
+        /* 320 ns min period ~= 3 MHz */
+        spi-max-frequency = <3000000>;
+        /* Width and height from data sheet */
+        width-mm = <116>;
+        height-mm = <87>;
+        grestb-gpios = <&foo_gpio 5 1>;
+        backlight = <&bl>;
+
+        port {
+          nomadik_clcd_panel: endpoint {
+            remote-endpoint = <&foo>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
new file mode 100644
index 0000000000..6ba3236839
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox R66451 AMOLED DSI Panel
+
+maintainers:
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,r66451
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddio-supply: true
+  vdd-supply: true
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vdd-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "visionox,r66451";
+            reg = <0>;
+            vddio-supply = <&vreg_l12c_1p8>;
+            vdd-supply = <&vreg_l13c_3p0>;
+
+            reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 0000000000..fa745a6f44
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels
+
+maintainers:
+  - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+  This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,rm69299-1080p-display
+
+  reg: true
+
+  vdda-supply:
+    description: |
+      Phandle of the regulator that provides the vdda supply voltage.
+
+  vdd3p3-supply:
+    description: |
+      Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vdda-supply
+  - vdd3p3-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,rm69299-1080p-display";
+            reg = <0>;
+
+            vdda-supply = <&src_pp1800_l8c>;
+            vdd3p3-supply = <&src_pp2800_l18a>;
+
+            reset-gpios = <&pm6150l_gpio 3 0>;
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
new file mode 100644
index 0000000000..d5a8295106
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox VTDR6130 AMOLED DSI Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,vtdr6130
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddio-supply: true
+  vci-supply: true
+  vdd-supply: true
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vci-supply
+  - vdd-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "visionox,vtdr6130";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l12b_1p8>;
+            vci-supply = <&vreg_l13b_3p0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+
+            reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
new file mode 100644
index 0000000000..c407deb6af
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: xinpeng,xpp055c272
+  reg: true
+  backlight: true
+  port: true
+  reset-gpios: true
+  iovcc-supply:
+    description: regulator that supplies the iovcc voltage
+  vci-supply:
+    description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - port
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "xinpeng,xpp055c272";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
new file mode 100644
index 0000000000..561efaaa5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,cmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Color Management Module (CMM)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+
+description: |+
+  Renesas R-Car color management module connected to R-Car DU video channels.
+  It provides image enhancement functions such as 1-D look-up tables (LUT),
+  3-D look-up tables (CLU), 1D-histogram generation (HGO), and color
+  space conversion (CSC).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a7795-cmm
+              - renesas,r8a7796-cmm
+              - renesas,r8a77965-cmm
+              - renesas,r8a77990-cmm
+              - renesas,r8a77995-cmm
+          - const: renesas,rcar-gen3-cmm
+      - items:
+          - const: renesas,rcar-gen2-cmm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7796-sysc.h>
+
+    cmm0: cmm@fea40000 {
+         compatible = "renesas,r8a7796-cmm",
+                      "renesas,rcar-gen3-cmm";
+         reg = <0xfea40000 0x1000>;
+         power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+         clocks = <&cpg CPG_MOD 711>;
+         resets = <&cpg 711>;
+    };
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
new file mode 100644
index 0000000000..c5b9e6812b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -0,0 +1,867 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Display Unit (DU)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas R-Car
+  Gen1, R-Car Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
+
+properties:
+  compatible:
+    enum:
+      - renesas,du-r8a7742 # for RZ/G1H compatible DU
+      - renesas,du-r8a7743 # for RZ/G1M compatible DU
+      - renesas,du-r8a7744 # for RZ/G1N compatible DU
+      - renesas,du-r8a7745 # for RZ/G1E compatible DU
+      - renesas,du-r8a77470 # for RZ/G1C compatible DU
+      - renesas,du-r8a774a1 # for RZ/G2M compatible DU
+      - renesas,du-r8a774b1 # for RZ/G2N compatible DU
+      - renesas,du-r8a774c0 # for RZ/G2E compatible DU
+      - renesas,du-r8a774e1 # for RZ/G2H compatible DU
+      - renesas,du-r8a7779 # for R-Car H1 compatible DU
+      - renesas,du-r8a7790 # for R-Car H2 compatible DU
+      - renesas,du-r8a7791 # for R-Car M2-W compatible DU
+      - renesas,du-r8a7792 # for R-Car V2H compatible DU
+      - renesas,du-r8a7793 # for R-Car M2-N compatible DU
+      - renesas,du-r8a7794 # for R-Car E2 compatible DU
+      - renesas,du-r8a7795 # for R-Car H3 compatible DU
+      - renesas,du-r8a7796 # for R-Car M3-W compatible DU
+      - renesas,du-r8a77961 # for R-Car M3-W+ compatible DU
+      - renesas,du-r8a77965 # for R-Car M3-N compatible DU
+      - renesas,du-r8a77970 # for R-Car V3M compatible DU
+      - renesas,du-r8a77980 # for R-Car V3H compatible DU
+      - renesas,du-r8a77990 # for R-Car E3 compatible DU
+      - renesas,du-r8a77995 # for R-Car D3 compatible DU
+      - renesas,du-r8a779a0 # for R-Car V3U compatible DU
+      - renesas,du-r8a779g0 # for R-Car V4H compatible DU
+
+  reg:
+    maxItems: 1
+
+  # See compatible-specific constraints below.
+  clocks: true
+  clock-names: true
+  interrupts:
+    description: Interrupt specifiers, one per DU channel
+  resets: true
+  reset-names: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+      The number of ports and their assignment are model-dependent. Each port
+      shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-3]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+      - port@1
+
+    unevaluatedProperties: false
+
+  renesas,cmms:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      A list of phandles to the CMM instances present in the SoC, one for each
+      available DU channel.
+
+  renesas,vsps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,du-r8a7779
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: Functional clock
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 1
+          items:
+            - const: du.0
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            # port@2 is TCON, not supported yet
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7743
+              - renesas,du-r8a7744
+              - renesas,du-r8a7791
+              - renesas,du-r8a7793
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            # port@2 is TCON, not supported yet
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7745
+              - renesas,du-r8a7792
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7794
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            # port@2 is TCON, not supported yet
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a77470
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: DPAD 1
+            port@2:
+              description: LVDS 0
+            # port@3 is DVENC, not supported yet
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7742
+              - renesas,du-r8a7790
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU2
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN2 input clock
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.2
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+
+        interrupts:
+          maxItems: 3
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            port@2:
+              description: LVDS 1
+            # port@3 is TCON, not supported yet
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a7795
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU2
+            - description: Functional clock for DU4
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN2 input clock
+            - description: DU_DOTCLKIN3 input clock
+
+        clock-names:
+          minItems: 4
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.2
+            - const: du.3
+            - pattern: '^dclkin\.[0123]$'
+            - pattern: '^dclkin\.[0123]$'
+            - pattern: '^dclkin\.[0123]$'
+            - pattern: '^dclkin\.[0123]$'
+
+        interrupts:
+          maxItems: 4
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: du.0
+            - const: du.2
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: HDMI 0
+            port@2:
+              description: HDMI 1
+            port@3:
+              description: LVDS 0
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+        renesas,cmms:
+          minItems: 4
+
+        renesas,vsps:
+          minItems: 4
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a774a1
+              - renesas,du-r8a7796
+              - renesas,du-r8a77961
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU2
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN2 input clock
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.2
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+            - pattern: '^dclkin\.[012]$'
+
+        interrupts:
+          maxItems: 3
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: du.0
+            - const: du.2
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: HDMI 0
+            port@2:
+              description: LVDS 0
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        renesas,cmms:
+          minItems: 3
+
+        renesas,vsps:
+          minItems: 3
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a774b1
+              - renesas,du-r8a774e1
+              - renesas,du-r8a77965
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: Functional clock for DU3
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+            - description: DU_DOTCLKIN3 input clock
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: du.0
+            - const: du.1
+            - const: du.3
+            - pattern: '^dclkin\.[013]$'
+            - pattern: '^dclkin\.[013]$'
+            - pattern: '^dclkin\.[013]$'
+
+        interrupts:
+          maxItems: 3
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: du.0
+            - const: du.3
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: HDMI 0
+            port@2:
+              description: LVDS 0
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        renesas,cmms:
+          minItems: 3
+
+        renesas,vsps:
+          minItems: 3
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a77970
+              - renesas,du-r8a77980
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: Functional clock for DU0
+            - description: DU_DOTCLKIN0 input clock
+
+        clock-names:
+          minItems: 1
+          items:
+            - const: du.0
+            - const: dclkin.0
+
+        interrupts:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+        renesas,vsps:
+          minItems: 1
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a774c0
+              - renesas,du-r8a77990
+              - renesas,du-r8a77995
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: Functional clock for DU0
+            - description: Functional clock for DU1
+            - description: DU_DOTCLKIN0 input clock
+            - description: DU_DOTCLKIN1 input clock
+
+        clock-names:
+          minItems: 2
+          items:
+            - const: du.0
+            - const: du.1
+            - pattern: '^dclkin\.[01]$'
+            - pattern: '^dclkin\.[01]$'
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DPAD 0
+            port@1:
+              description: LVDS 0
+            port@2:
+              description: LVDS 1
+            # port@3 is TCON, not supported yet
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        renesas,cmms:
+          minItems: 2
+
+        renesas,vsps:
+          minItems: 2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a779a0
+              - renesas,du-r8a779g0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Functional clock
+
+        clock-names:
+          items:
+            - const: du.0
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DSI 0
+            port@1:
+              description: DSI 1
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+        renesas,vsps:
+          minItems: 2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # R-Car H3 ES2.0 DU
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@feb00000 {
+        compatible = "renesas,du-r8a7795";
+        reg = <0xfeb00000 0x80000>;
+        interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 724>,
+                 <&cpg CPG_MOD 723>,
+                 <&cpg CPG_MOD 722>,
+                 <&cpg CPG_MOD 721>;
+        clock-names = "du.0", "du.1", "du.2", "du.3";
+        resets = <&cpg 724>, <&cpg 722>;
+        reset-names = "du.0", "du.2";
+
+        renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+        renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&adv7123_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dw_hdmi0_in>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&dw_hdmi1_in>;
+                };
+            };
+            port@3 {
+                reg = <3>;
+                endpoint {
+                    remote-endpoint = <&lvds0_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/repaper.txt b/Documentation/devicetree/bindings/display/repaper.txt
new file mode 100644
index 0000000000..f5f9f9cf6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/repaper.txt
@@ -0,0 +1,52 @@
+Pervasive Displays RePaper branded e-ink displays
+
+Required properties:
+- compatible:		"pervasive,e1144cs021" for 1.44" display
+			"pervasive,e1190cs021" for 1.9" display
+			"pervasive,e2200cs021" for 2.0" display
+			"pervasive,e2271cs021" for 2.7" display
+
+- panel-on-gpios:	Timing controller power control
+- discharge-gpios:	Discharge control
+- reset-gpios:		RESET pin
+- busy-gpios:		BUSY pin
+
+Required property for e2271cs021:
+- border-gpios:		Border control
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional property:
+- pervasive,thermal-zone:	name of thermometer's thermal zone
+
+Example:
+
+	display_temp: lm75@48 {
+		compatible = "lm75b";
+		reg = <0x48>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermal-zones {
+		display {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&display_temp>;
+		};
+	};
+
+	papirus27@0{
+		compatible = "pervasive,e2271cs021";
+		reg = <0>;
+
+		spi-max-frequency = <8000000>;
+
+		panel-on-gpios = <&gpio 23 0>;
+		border-gpios = <&gpio 14 0>;
+		discharge-gpios = <&gpio 15 0>;
+		reset-gpios = <&gpio 24 0>;
+		busy-gpios = <&gpio 25 0>;
+
+		pervasive,thermal-zone = "display";
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 0000000000..8df7d2e393
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: must be "rockchip,rk3399-cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+	       Required elements: "core-clk" "pclk" "spdif" "grf"
+
+- resets : a list of phandle + reset specifier pairs
+- reset-names : string of reset names
+		Required elements: "apb", "core", "dptx", "spdif"
+- power-domains : power-domain property defined with a phandle
+		  to respective power domain.
+- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
+- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+	 Documentation/devicetree/bindings/media/video-interfaces.txt.
+	 contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+- extcon: extcon specifier for the Power Delivery
+
+- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
+
+-------------------------------------------------------------------------------
+
+Example:
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		assigned-clocks = <&cru SCLK_DP_CORE>;
+		assigned-clock-rates = <100000000>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>;
+		reset-names = "spdif";
+		extcon = <&fusb0>, <&fusb1>;
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
new file mode 100644
index 0000000000..cec21714f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
@@ -0,0 +1,49 @@
+Rockchip specific extensions to the Innosilicon HDMI
+================================
+
+Required properties:
+- compatible:
+	"rockchip,rk3036-inno-hdmi";
+- reg:
+	Physical base address and length of the controller's registers.
+- clocks, clock-names:
+	Phandle to hdmi controller clock, name should be "pclk"
+- interrupts:
+	HDMI interrupt number
+- ports:
+	Contain one port node with endpoint definitions as defined in
+	Documentation/devicetree/bindings/graph.txt.
+- pinctrl-0, pinctrl-name:
+	Switch the iomux of HPD/CEC pins to HDMI function.
+
+Example:
+hdmi: hdmi@20034000 {
+	compatible = "rockchip,rk3036-inno-hdmi";
+	reg = <0x20034000 0x4000>;
+	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru  PCLK_HDMI>;
+	clock-names = "pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ctl>;
+
+	hdmi_in: port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		hdmi_in_lcdc: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&lcdc_out_hdmi>;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		hdmi_ctl: hdmi-ctl {
+			rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
+					<1 9  RK_FUNC_1 &pcfg_pull_none>,
+					<1 10 RK_FUNC_1 &pcfg_pull_none>,
+					<1 11 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
new file mode 100644
index 0000000000..60dedf9b2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-dp
+      - rockchip,rk3399-edp
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: dp
+      - const: pclk
+      - const: grf
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dp
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC makes use of GRF regs.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dp@ff970000 {
+      compatible = "rockchip,rk3288-dp";
+      reg = <0xff970000 0x4000>;
+      interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+      clock-names = "dp", "pclk";
+      phys = <&dp_phy>;
+      phy-names = "dp";
+      resets = <&cru 111>;
+      reset-names = "dp";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&edp_hpd>;
+      pinctrl-names = "default";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          edp_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_edp>;
+          };
+          edp_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_edp>;
+          };
+        };
+
+        edp_out: port@1 {
+          reg = <1>;
+
+          edp_out_panel: endpoint {
+            remote-endpoint = <&panel_in_edp>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
new file mode 100644
index 0000000000..7e59dee15a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DWC HDMI TX Encoder
+
+maintainers:
+  - Mark Yao <markyao0591@gmail.com>
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+  with a companion PHY IP.
+
+allOf:
+  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-dw-hdmi
+      - rockchip,rk3288-dw-hdmi
+      - rockchip,rk3328-dw-hdmi
+      - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
+  clocks:
+    minItems: 2
+    items:
+      - {}
+      - {}
+      # The next three clocks are all optional, but shall be specified in this
+      # order when present.
+      - description: The HDMI CEC controller main clock
+      - description: Power for GRF IO
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
+
+  clock-names:
+    minItems: 2
+    items:
+      - {}
+      - {}
+      - enum:
+          - cec
+          - grf
+          - vpll
+          - ref
+      - enum:
+          - grf
+          - vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
+
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The HDMI DDC bus can be connected to either a system I2C master or the
+      functionally-reduced I2C master contained in the DWC HDMI. When connected
+      to a system I2C master this property contains a phandle to that I2C
+      master controller.
+
+  phys:
+    maxItems: 1
+    description: The HDMI PHY
+
+  phy-names:
+    const: hdmi
+
+  pinctrl-names:
+    description:
+      The unwedge pinctrl entry shall drive the DDC SDA line low. This is
+      intended to work around a hardware errata that can cause the DDC I2C
+      bus to be wedged.
+    minItems: 1
+    items:
+      - const: default
+      - const: unwedge
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port(@0)?$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input of the DWC HDMI TX
+        properties:
+          endpoint:
+            description: Connection to the VOP
+          endpoint@0:
+            description: Connection to the VOPB
+          endpoint@1:
+            description: Connection to the VOPL
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the DWC HDMI TX
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the GRF to mux vopl/vopb.
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+  - clocks
+  - clock-names
+  - interrupts
+  - ports
+  - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hdmi: hdmi@ff980000 {
+        compatible = "rockchip,rk3288-dw-hdmi";
+        reg = <0xff980000 0x20000>;
+        reg-io-width = <4>;
+        ddc-i2c-bus = <&i2c5>;
+        rockchip,grf = <&grf>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                hdmi_in_vopb: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&vopb_out_hdmi>;
+                };
+                hdmi_in_vopl: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&vopl_out_hdmi>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 0000000000..8e8a408791
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-mipi-dsi
+          - rockchip,rk3288-mipi-dsi
+          - rockchip,rk3399-mipi-dsi
+          - rockchip,rk3568-mipi-dsi
+      - const: snps,dw-mipi-dsi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: ref
+          - const: pclk
+          - const: phy_cfg
+          - const: grf
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  "#phy-cells":
+    const: 0
+    description:
+      Defined when in use as ISP phy.
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-mipi-dsi
+              - rockchip,rk3568-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi_dsi: dsi@ff960000 {
+      compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+      reg = <0xff960000 0x4000>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+      clock-names = "ref", "pclk";
+      resets = <&cru SRST_MIPIDSI0>;
+      reset-names = "apb";
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mipi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          mipi_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_mipi>;
+          };
+          mipi_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_mipi>;
+          };
+        };
+
+        mipi_out: port@1 {
+          reg = <1>;
+
+          mipi_out_panel: endpoint {
+            remote-endpoint = <&panel_in_mipi>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
new file mode 100644
index 0000000000..03b002a05c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip low-voltage differential signal (LVDS) transmitter
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-lvds
+      - rockchip,rk3288-lvds
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk_lvds
+
+  avdd1v0-supply:
+    description: 1.0V analog power.
+
+  avdd1v8-supply:
+    description: 1.8V analog power.
+
+  avdd3v3-supply:
+    description: 3.3V analog power.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the general register files syscon.
+
+  rockchip,output:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [rgb, lvds, duallvds]
+    description: This describes the output interface.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  pinctrl-names:
+    const: lcdc
+
+  pinctrl-0: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 0 for the VOP input.
+          The remote endpoint maybe vopb or vopl.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 1 for either a panel or subsequent encoder.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - rockchip,grf
+  - rockchip,output
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-lvds
+
+    then:
+      properties:
+        reg: false
+        clocks: false
+        clock-names: false
+        avdd1v0-supply: false
+        avdd1v8-supply: false
+        avdd3v3-supply: false
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-lvds
+
+    then:
+      properties:
+        phys: false
+        phy-names: false
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+        - avdd1v0-supply
+        - avdd1v8-supply
+        - avdd3v3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    lvds: lvds@ff96c000 {
+      compatible = "rockchip,rk3288-lvds";
+      reg = <0xff96c000 0x4000>;
+      clocks = <&cru PCLK_LVDS_PHY>;
+      clock-names = "pclk_lvds";
+      avdd1v0-supply = <&vdd10_lcd>;
+      avdd1v8-supply = <&vcc18_lcd>;
+      avdd3v3-supply = <&vcca_33>;
+      pinctrl-names = "lcdc";
+      pinctrl-0 = <&lcdc_ctl>;
+      rockchip,grf = <&grf>;
+      rockchip,output = "rgb";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          lvds_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_lvds>;
+          };
+          lvds_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_lvds>;
+          };
+        };
+
+        lvds_out: port@1 {
+          reg = <1>;
+
+          lvds_out_panel: endpoint {
+            remote-endpoint = <&panel_in_lvds>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
new file mode 100644
index 0000000000..1a68a940d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3066 HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3066-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with two endpoints, numbered 0 and 1,
+          connected respectively to vop0 and vop1.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - power-domains
+  - rockchip,grf
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3066a-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rk3066-power.h>
+    hdmi: hdmi@10116000 {
+      compatible = "rockchip,rk3066-hdmi";
+      reg = <0x10116000 0x2000>;
+      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_HDMI>;
+      clock-names = "hclk";
+      pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+      pinctrl-names = "default";
+      power-domains = <&power RK3066_PD_VIO>;
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          hdmi_in_vop0: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vop0_out_hdmi>;
+          };
+          hdmi_in_vop1: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vop1_out_hdmi>;
+          };
+        };
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_hpd: hdmi-hpd {
+          rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+        };
+        hdmii2c_xfer: hdmii2c-xfer {
+          rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+                          <0 RK_PA2 1 &pcfg_pull_none>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
new file mode 100644
index 0000000000..a8d18a37cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DRM master device
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip DRM master device is a virtual device needed to list all
+  vop devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+properties:
+  compatible:
+    const: rockchip,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      Should contain a list of phandles pointing to display interface port
+      of vop devices. vop definitions as defined in
+      Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "rockchip,display-subsystem";
+        ports = <&vopl_out>, <&vopb_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
new file mode 100644
index 0000000000..df61cb5f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+  VOP (Video Output Processor) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-vop-big
+      - rockchip,px30-vop-lit
+      - rockchip,rk3036-vop
+      - rockchip,rk3066-vop
+      - rockchip,rk3126-vop
+      - rockchip,rk3188-vop
+      - rockchip,rk3228-vop
+      - rockchip,rk3288-vop
+      - rockchip,rk3328-vop
+      - rockchip,rk3366-vop
+      - rockchip,rk3368-vop
+      - rockchip,rk3399-vop-big
+      - rockchip,rk3399-vop-lit
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Pixel clock.
+      - description: Clock for the ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: aclk_vop
+      - const: dclk_vop
+      - const: hclk_vop
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: dclk
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-rates:
+    maxItems: 2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3288-power.h>
+    vopb: vopb@ff930000 {
+      compatible = "rockchip,rk3288-vop";
+      reg = <0xff930000 0x19c>,
+            <0xff931000 0x1000>;
+      interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP0>,
+               <&cru DCLK_VOP0>,
+               <&cru HCLK_VOP0>;
+      clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+      power-domains = <&power RK3288_PD_VIO>;
+      resets = <&cru SRST_LCDC1_AXI>,
+               <&cru SRST_LCDC1_AHB>,
+               <&cru SRST_LCDC1_DCLK>;
+      reset-names = "axi", "ahb", "dclk";
+      iommus = <&vopb_mmu>;
+      vopb_out: port {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vopb_out_edp: endpoint@0 {
+          reg = <0>;
+          remote-endpoint = <&edp_in_vopb>;
+        };
+        vopb_out_hdmi: endpoint@1 {
+          reg = <1>;
+          remote-endpoint = <&hdmi_in_vopb>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 0000000000..b60b90472d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  reg-names:
+    items:
+      - const: vop
+      - const: gamma-lut
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                reg-names = "vop", "gamma-lut";
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk",
+                              "hclk",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
new file mode 100644
index 0000000000..458d399cb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI DDC
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,exynos4210-hdmiddc
+      - const: samsung,exynos5-hdmiddc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ddc@50 {
+            compatible = "samsung,exynos4210-hdmiddc";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
new file mode 100644
index 0000000000..e4a68c5a1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-hdmi
+      - samsung,exynos4212-hdmi
+      - samsung,exynos5420-hdmi
+      - samsung,exynos5433-hdmi
+
+  clocks:
+    minItems: 5
+    maxItems: 10
+
+  clock-names:
+    minItems: 5
+    maxItems: 10
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI DDC node.
+
+  hdmi-en-supply:
+    description:
+      Provides voltage source for DCC lines available on HDMI connector. When
+      there is no power provided for DDC epprom, some TV-sets do not pulls up
+      HPD (hot plug detect) line, what causes HDMI block to stay turned off.
+      When provided, the regulator allows TV-set correctly signal HPD event.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to HPD
+
+  interrupts:
+    maxItems: 1
+
+  phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the HDMI PHY node.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-supply:
+    description:
+      VDD 1.0V HDMI TX.
+
+  vdd_osc-supply:
+    description:
+      VDD 1.8V HDMI OSC.
+
+  vdd_pll-supply:
+    description:
+      VDD 1.0V HDMI PLL.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ddc
+  - hpd-gpios
+  - interrupts
+  - phy
+  - reg
+  - samsung,syscon-phandle
+  - '#sound-dai-cells'
+  - vdd-supply
+  - vdd_osc-supply
+  - vdd_pll-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP APB bus.
+            - description: Gate of HDMI-PHY IP APB bus.
+            - description: Gate of HDMI TMDS clock.
+            - description: Gate of HDMI pixel clock.
+            - description: TMDS clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and tmds_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Pixel clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and pixel_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Oscillator clock, used as parent of following *_user
+                clocks in case HDMI-PHY is not operational.
+            - description: Gate of HDMI SPDIF clock.
+        clock-names:
+          items:
+            - const: hdmi_pclk
+            - const: hdmi_i_pclk
+            - const: i_tmds_clk
+            - const: i_pixel_clk
+            - const: tmds_clko
+            - const: tmds_clko_user
+            - const: pixel_clko
+            - const: pixel_clko_user
+            - const: oscclk
+            - const: i_spdif_clk
+      required:
+        - samsung,sysreg-phandle
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP bus clock.
+            - description: Gate of HDMI special clock.
+            - description: Pixel special clock, one of the two possible inputs
+                of HDMI clock mux.
+            - description: HDMI PHY clock output, one of two possible inputs of
+                HDMI clock mux.
+            - description: It is required by the driver to switch between the 2
+                parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+                after configuration, parent is set to sclk_hdmiphy else
+                sclk_pixel.
+        clock-names:
+          items:
+            - const: hdmi
+            - const: sclk_hdmi
+            - const: sclk_pixel
+            - const: sclk_hdmiphy
+            - const: mout_hdmi
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hdmi@13970000 {
+        compatible = "samsung,exynos5433-hdmi";
+        reg = <0x13970000 0x70000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_disp CLK_PCLK_HDMI>,
+                 <&cmu_disp CLK_PCLK_HDMIPHY>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+                 <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+                 <&xxti>,
+                 <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+        clock-names = "hdmi_pclk",
+                      "hdmi_i_pclk",
+                      "i_tmds_clk",
+                      "i_pixel_clk",
+                      "tmds_clko",
+                      "tmds_clko_user",
+                      "pixel_clko",
+                      "pixel_clko_user",
+                      "oscclk",
+                      "i_spdif_clk";
+        phy = <&hdmiphy>;
+        ddc = <&hsi2c_11>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,sysreg-phandle = <&syscon_disp>;
+        #sound-dai-cells = <0>;
+
+        hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&ldo6_reg>;
+        vdd_osc-supply = <&ldo7_reg>;
+        vdd_pll-supply = <&ldo6_reg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                hdmi_to_tv: endpoint {
+                    remote-endpoint = <&tv_to_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                hdmi_to_mhl: endpoint {
+                    remote-endpoint = <&mhl_to_hdmi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
new file mode 100644
index 0000000000..25d53fde92
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Mixer
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data
+  inputs before passing it to an output device.  The output is passed to HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mixer
+          - samsung,exynos4212-mixer
+          - samsung,exynos5250-mixer
+          - samsung,exynos5420-mixer
+      - const: samsung,exynos5-mixer
+        deprecated: true
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Gate of Mixer IP bus clock.
+      - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+      - description: HDMI Special clock, one of the two possible inputs of
+          mixer mux.
+      - description: Video Processor clock.
+      - description: Mixer mux clock.
+      - description: Mixer Special clock.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mixer
+      - const: hdmi
+      - const: sclk_hdmi
+      - const: vp
+      - const: mout_mixer
+      - const: sclk_mixer
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: Mixer memory region.
+      - description: Video Processor memory region.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mixer
+              - samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-mixer
+              - samsung,exynos5250-mixer
+              - samsung,exynos5420-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        regs:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mixer@14450000 {
+        compatible = "samsung,exynos5250-mixer";
+        reg = <0x14450000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MIXER>,
+                 <&clock CLK_HDMI>,
+                 <&clock CLK_SCLK_HDMI>;
+        clock-names = "mixer",
+                      "hdmi",
+                      "sclk_hdmi";
+        iommus = <&sysmmu_tv>;
+        power-domains = <&pd_disp1>;
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
new file mode 100644
index 0000000000..6380eeebb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos5433 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5433-decon
+      - samsung,exynos5433-decon-tv
+
+  clocks:
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk_decon
+      - const: aclk_smmu_decon0x
+      - const: aclk_xiu_decon0x
+      - const: pclk_smmu_decon0x
+      - const: aclk_smmu_decon1x
+      - const: aclk_xiu_decon1x
+      - const: pclk_smmu_decon1x
+      - const: sclk_decon_vclk
+      - const: sclk_decon_eclk
+      - const: dsd
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+    description: |
+      Interrupts depend on mode of work:
+       - video mode: vsync
+       - command mode: lcd_sys
+       - command mode with software trigger: lcd_sys, te
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+      - const: te
+
+  iommus:
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13800000 {
+        compatible = "samsung,exynos5433-decon";
+        reg = <0x13800000 0x2104>;
+        clocks = <&cmu_disp CLK_PCLK_DECON>,
+                 <&cmu_disp CLK_ACLK_DECON>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_SCLK_DECON_VCLK>,
+                 <&cmu_disp CLK_SCLK_DECON_ECLK>,
+                 <&cmu_disp CLK_SCLK_DSD>;
+        clock-names = "pclk",
+                      "aclk_decon",
+                      "aclk_smmu_decon0x",
+                      "aclk_xiu_decon0x",
+                      "pclk_smmu_decon0x",
+                      "aclk_smmu_decon1x",
+                      "aclk_xiu_decon1x",
+                      "pclk_smmu_decon1x",
+                      "sclk_decon_vclk",
+                      "sclk_decon_eclk",
+                      "dsd";
+        power-domains = <&pd_disp>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+        samsung,disp-sysreg = <&syscon_disp>;
+        iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+        iommu-names = "m0", "m1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                decon_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_decon>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
new file mode 100644
index 0000000000..26e5017737
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is
+  not capable of transferring high resoltuion frame data as DECON can send. MIC
+  solves this problem by compressing the frame data by 1/2 before it is
+  transferred through MIPI DSI. The compressed frame data must be uncompressed
+  in the panel PCB.
+
+properties:
+  compatible:
+    const: samsung,exynos5433-mic
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk_mic0
+      - const: sclk_rgb_vclk_to_mic0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg
+  - samsung,disp-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    image-processor@13930000 {
+        compatible = "samsung,exynos5433-mic";
+        reg = <0x13930000 0x48>;
+        clocks = <&cmu_disp CLK_PCLK_MIC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+        clock-names = "pclk_mic0",
+                      "sclk_rgb_vclk_to_mic0";
+        power-domains = <&pd_disp>;
+        samsung,disp-syscon = <&syscon_disp>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mic_to_decon: endpoint {
+                    remote-endpoint = <&decon_to_mic>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mic_to_dsi: endpoint {
+                    remote-endpoint = <&dsi_to_mic>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
new file mode 100644
index 0000000000..992c23ca7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos7 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    const: samsung,exynos7-decon
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: pclk_decon0
+      - const: aclk_decon0
+      - const: decon0_eclk
+      - const: decon0_vclk
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: timing configuration for lcd i80 interface support
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13930000 {
+        compatible = "samsung,exynos7-decon";
+        reg = <0x13930000 0x1000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock_disp 100>, /* PCLK_DECON_INT */
+                 <&clock_disp 101>, /* ACLK_DECON_INT */
+                 <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */
+                 <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */
+        clock-names = "pclk_decon0",
+                      "aclk_decon0",
+                      "decon0_eclk",
+                      "decon0_vclk";
+        pinctrl-0 = <&lcd_clk &pwm1_out>;
+        pinctrl-names = "default";
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
new file mode 100644
index 0000000000..075231716b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2443-fimd
+      - samsung,s3c6400-fimd
+      - samsung,s5pv210-fimd
+      - samsung,exynos3250-fimd
+      - samsung,exynos4210-fimd
+      - samsung,exynos5250-fimd
+      - samsung,exynos5420-fimd
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sclk_fimd
+      - const: fimd
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: |
+      Timing configuration for lcd i80 interface support.
+      The parameters are defined as::
+      VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                        :            :            :            :            :
+      Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                        | cs-setup+1 |            :            :            :
+                        |<---------->|            :            :            :
+      Chip Select     ???????????????|____________:____________:____________|??
+                                     | wr-setup+1 |            | wr-hold+1  |
+                                     |<---------->|            |<---------->|
+      Write Enable    ????????????????????????????|____________|???????????????
+                                                  | wr-active+1|
+                                                  |<---------->|
+      Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,invert-vden:
+    type: boolean
+    description:
+      Video enable signal is inverted.
+
+  samsung,invert-vclk:
+    type: boolean
+    description:
+      Video clock signal is inverted.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to System Register syscon.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^port@[0-4]+$":
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Contains ports with port with index::
+       0 - for CAMIF0 input,
+       1 - for CAMIF1 input,
+       2 - for CAMIF2 input,
+       3 - for parallel output,
+       4 - for write-back interface
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-fimd
+    then:
+      properties:
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    fimd@11c00000 {
+        compatible = "samsung,exynos4210-fimd";
+        interrupt-parent = <&combiner>;
+        reg = <0x11c00000 0x20000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <11 0>, <11 1>, <11 2>;
+        clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+        clock-names = "sclk_fimd", "fimd";
+        power-domains = <&pd_lcd0>;
+        iommus = <&sysmmu_fimd0>;
+        samsung,sysreg = <&sys_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        samsung,invert-vden;
+        samsung,invert-vclk;
+
+        pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+        pinctrl-names = "default";
+
+        port@3 {
+            reg = <3>;
+
+            fimd_dpi_ep: endpoint {
+                remote-endpoint = <&lcd_ep>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
new file mode 100644
index 0000000000..296500f9da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Framebuffer
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+
+description: |+
+  A simple frame-buffer describes a frame-buffer setup by firmware or
+  the bootloader, with the assumption that the display hardware has
+  already been set up to scan out from the memory pointed to by the
+  reg property.
+
+  Since simplefb nodes represent runtime information they must be
+  sub-nodes of the chosen node (*). Simplefb nodes must be named
+  framebuffer@<address>.
+
+  If the devicetree contains nodes for the display hardware used by a
+  simplefb, then the simplefb node must contain a property called
+  display, which contains a phandle pointing to the primary display
+  hw node, so that the OS knows which simplefb to disable when handing
+  over control to a driver for the real hardware. The bindings for the
+  hw nodes must specify which node is considered the primary node.
+
+  If a panel node is given, then the driver uses this to configure the
+  physical width and height of the display. If no panel node is given,
+  then the driver uses the width and height properties of the simplefb
+  node to estimate it.
+
+  It is advised to add display# aliases to help the OS determine how
+  to number things. If display# aliases are used, then if the simplefb
+  node contains a display property then the /aliases/display# path
+  must point to the display hw node the display property points to,
+  otherwise it must point directly to the simplefb node.
+
+  If a simplefb node represents the preferred console for user
+  interaction, then the chosen node stdout-path property should point
+  to it, or to the primary display hw node, as with display#
+  aliases. If display aliases are used then it should be set to the
+  alias instead.
+
+  It is advised that devicetree files contain pre-filled, disabled
+  framebuffer nodes, so that the firmware only needs to update the
+  mode information and enable them. This way if e.g. later on support
+  for more display clocks get added, the simplefb nodes will already
+  contain this info and the firmware does not need to be updated.
+
+  If pre-filled framebuffer nodes are used, the firmware may need
+  extra information to find the right node. In that case an extra
+  platform specific compatible and platform specific properties should
+  be used and documented.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,simple-framebuffer
+              - allwinner,simple-framebuffer
+              - amlogic,simple-framebuffer
+          - const: simple-framebuffer
+      - const: simple-framebuffer
+
+  reg:
+    description: Location and size of the framebuffer memory
+
+  memory-region:
+    maxItems: 1
+    description: Phandle to a node describing the memory to be used for the
+      framebuffer. If present, overrides the "reg" property (if one exists).
+
+  clocks:
+    description: List of clocks used by the framebuffer.
+
+  power-domains:
+    description: List of power domains used by the framebuffer.
+
+  width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Width of the framebuffer in pixels
+
+  height:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Height of the framebuffer in pixels
+
+  stride:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of bytes of a line in the framebuffer
+
+  format:
+    description: >
+      Format of the framebuffer:
+        * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
+        * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+        * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
+        * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r
+    enum:
+      - a1r5g5b5
+      - a2r10g10b10
+      - a8b8g8r8
+      - a8r8g8b8
+      - r5g6b5
+      - r5g5b5a1
+      - r8g8b8
+      - x1r5g5b5
+      - x2r10g10b10
+      - x8r8g8b8
+      - x8b8g8r8
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Primary display hardware node
+
+  panel:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Display panel node
+
+  allwinner,pipeline:
+    description: Pipeline used by the framebuffer on Allwinner SoCs
+    enum:
+      - de_be0-lcd0
+      - de_be0-lcd0-hdmi
+      - de_be0-lcd0-tve0
+      - de_be1-lcd0
+      - de_be1-lcd1-hdmi
+      - de_fe0-de_be0-lcd0
+      - de_fe0-de_be0-lcd0-hdmi
+      - de_fe0-de_be0-lcd0-tve0
+      - mixer0-lcd0
+      - mixer0-lcd0-hdmi
+      - mixer1-lcd1-hdmi
+      - mixer1-lcd1-tve
+
+  amlogic,pipeline:
+    description: Pipeline used by the framebuffer on Amlogic SoCs
+    enum:
+      - vpu-cvbs
+      - vpu-hdmi
+
+patternProperties:
+  "^[a-zA-Z0-9-]+-supply$":
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Regulators used by the framebuffer. These should be named
+      according to the names in the device design.
+
+required:
+  # The binding requires also reg, width, height, stride and format,
+  # but usually they will be filled by the bootloader.
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,simple-framebuffer
+
+    then:
+      required:
+        - allwinner,pipeline
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amlogic,simple-framebuffer
+
+    then:
+      required:
+        - amlogic,pipeline
+
+
+additionalProperties: false
+
+examples:
+  - |
+    / {
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        chosen {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            framebuffer0: framebuffer@1d385000 {
+                compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+                allwinner,pipeline = "de_be0-lcd0";
+                reg = <0x1d385000 3840000>;
+                width = <1600>;
+                height = <1200>;
+                stride = <3200>;
+                format = "r5g6b5";
+                clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+                lcd-supply = <&reg_dc1sw>;
+                display = <&lcdc0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
new file mode 100644
index 0000000000..1d0dad1210
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
@@ -0,0 +1,22 @@
+Sitronix ST7586 display panel
+
+Required properties:
+- compatible:	"lego,ev3-lcd".
+- a0-gpios:	The A0 signal (since this binding is for serial mode, this is
+                the pin labeled D1 on the controller, not the pin labeled A0)
+- reset-gpios:	Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	display@0{
+		compatible = "lego,ev3-lcd";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
new file mode 100644
index 0000000000..621f271484
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7735R Display Panels
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description:
+  This binding is for display panels using a Sitronix ST7715R or ST7735R
+  controller in SPI mode.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618)
+        items:
+          - enum:
+              - jianda,jd-t18003-t01
+          - const: sitronix,st7735r
+      - description:
+          Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD)
+        items:
+          - enum:
+              - okaya,rh128128t
+          - const: sitronix,st7715r
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  spi-max-frequency: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0{
+                    compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+                    rotation = <270>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/sm501fb.txt b/Documentation/devicetree/bindings/display/sm501fb.txt
new file mode 100644
index 0000000000..1c79c267a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sm501fb.txt
@@ -0,0 +1,32 @@
+* SM SM501
+
+The SM SM501 is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "smi,sm501".
+- reg : contain two entries:
+    - First entry: System Configuration register
+    - Second entry: IO space (Display Controller register)
+- interrupts : SMI interrupt to the cpu should be described here.
+
+Optional properties:
+- mode : select a video mode:
+    <xres>x<yres>[-<bpp>][@<refresh>]
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
+- little-endian: available on big endian systems, to
+  set different foreign endian.
+- big-endian: available on little endian systems, to
+  set different foreign endian.
+
+Example for MPC5200:
+	display@1,0 {
+		compatible = "smi,sm501";
+		reg = <1 0x00000000 0x00800000
+		       1 0x03e00000 0x00200000>;
+		interrupts = <1 1 3>;
+		mode = "640x480-32@60";
+		edid = [edid-data];
+	};
diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000000..c5c7dfd37d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
@@ -0,0 +1,35 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+  - compatible: "snps,arcpgu"
+  - reg: Physical base address and length of the controller's registers.
+  - clocks: A list of phandle + clock-specifier pairs, one for each
+    entry in 'clock-names'.
+  - clock-names: A list of clock names. For ARC PGU it should contain:
+      - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+  - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+	...
+
+	pgu@XXXXXXXX {
+		compatible = "snps,arcpgu";
+		reg = <0xXXXXXXXX 0x400>;
+		clocks = <&clock_node>;
+		clock-names = "pxlclk";
+
+		port {
+			pgu_output: endpoint {
+				remote-endpoint = <&hdmi_enc_input>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
new file mode 100644
index 0000000000..20e2bd15d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -0,0 +1,295 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD1307 OLED Controller Framebuffer
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+  compatible:
+    oneOf:
+      # Deprecated compatible strings
+      - enum:
+          - solomon,ssd1305fb-i2c
+          - solomon,ssd1306fb-i2c
+          - solomon,ssd1307fb-i2c
+          - solomon,ssd1309fb-i2c
+        deprecated: true
+      - enum:
+          - sinowealth,sh1106
+          - solomon,ssd1305
+          - solomon,ssd1306
+          - solomon,ssd1307
+          - solomon,ssd1309
+
+  reg:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  # Only required for SPI
+  dc-gpios:
+    description:
+      GPIO connected to the controller's D/C# (Data/Command) pin,
+      that is needed for 4-wire SPI to tell the controller if the
+      data sent is for a command register or the display data RAM
+    maxItems: 1
+
+  vbat-supply:
+    description: The supply for VBAT
+
+  solomon,height:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Height in pixel of the screen driven by the controller.
+      The default value is controller-dependent.
+
+  solomon,width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Width in pixel of the screen driven by the controller.
+      The default value is controller-dependent.
+
+  solomon,page-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    description:
+      Offset of pages (band of 8 pixels) that the screen is mapped to
+
+  solomon,segment-no-remap:
+    type: boolean
+    description:
+      Display needs normal (non-inverted) data column to segment mapping
+
+  solomon,col-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Offset of columns (COL/SEG) that the screen is mapped to
+
+  solomon,com-seq:
+    type: boolean
+    description:
+      Display uses sequential COM pin configuration
+
+  solomon,com-lrremap:
+    type: boolean
+    description:
+      Display uses left-right COM pin remap
+
+  solomon,com-invdir:
+    type: boolean
+    description:
+      Display uses inverted COM pin scan direction
+
+  solomon,com-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Number of the COM pin wired to the first display line
+
+  solomon,prechargep1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Length of deselect period (phase 1) in clock cycles
+
+  solomon,prechargep2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Length of precharge period (phase 2) in clock cycles.  This needs to be
+      the higher, the higher the capacitance of the OLED's pixels is.
+
+  solomon,dclk-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 16
+    description:
+      Clock divisor. The default value is controller-dependent.
+
+  solomon,dclk-frq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Clock frequency, higher value means higher frequency.
+      The default value is controller-dependent.
+
+  solomon,lookup-table:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4
+    description:
+      8 bit value array of current drive pulse widths for BANK0, and colors A,
+      B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64.
+      Color D is always width 64.
+
+  solomon,area-color-enable:
+    type: boolean
+    description:
+      Display uses color mode
+
+  solomon,low-power:
+    type: boolean
+    description:
+      Display runs in low power mode
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sinowealth,sh1106
+    then:
+      properties:
+        width:
+          default: 132
+        height:
+          default: 64
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1305-i2c
+              - solomon,ssd1305
+    then:
+      properties:
+        width:
+          default: 132
+        height:
+          default: 64
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1306-i2c
+              - solomon,ssd1306
+    then:
+      properties:
+        width:
+          default: 128
+        height:
+          default: 64
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1307-i2c
+              - solomon,ssd1307
+    then:
+      properties:
+        width:
+          default: 128
+        height:
+          default: 39
+        solomon,dclk-div:
+          default: 2
+        solomon,dclk-frq:
+          default: 12
+      required:
+        - pwms
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1309-i2c
+              - solomon,ssd1309
+    then:
+      properties:
+        width:
+          default: 128
+        height:
+          default: 64
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 10
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_i2c: oled@3c {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x3c>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+            };
+
+            ssd1306_i2c: oled@3d {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x3d>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_spi: oled@0 {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x0>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+            };
+
+            ssd1306_spi: oled@1 {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x1>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
new file mode 100644
index 0000000000..b3d5e1b96f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc DRM master device
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  The Unisoc DRM master device is a virtual device needed to list all
+  DPU devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+  Unisoc's display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, dpu0 and dpu1 maybe binding to different
+  encoder.
+
+  E.g:
+  dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
+  dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
+
+          +-----------------------------------------+
+          |                                         |
+          |                            +---------+  |
+  +----+  |   +----+    +---------+    |DPHY/CPHY|  |   +------+
+  |    +----->+dpu0+--->+MIPI|DSI +--->+Combo    +----->+Panel0|
+  |AXI |  |   +----+    +---------+    +---------+  |   +------+
+  |    |  |                  ^                      |
+  |    |  |                  |                      |
+  |    |  |      +-----------+                      |
+  |    |  |      |                                  |
+  |APB |  |   +--+-+    +-----------+    +---+      |   +------+
+  |    +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1|
+  |    |  |   +----+    +-----------+    +---+      |   +------+
+  +----+  |                                         |
+          +-----------------------------------------+
+
+properties:
+  compatible:
+    const: sprd,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of DPU devices.
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "sprd,display-subsystem";
+        ports = <&dpu_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 0000000000..4ebea60b8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+  which transfers the image data from a video memory buffer to an internal
+  LCD interface.
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: clk_src_128m
+      - const: clk_src_384m
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      That port should be the output endpoint, usually output to
+      the associated DSI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dpu: dpu@63000000 {
+        compatible = "sprd,sharkl3-dpu";
+        reg = <0x63000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_128m", "clk_src_384m";
+
+        clocks = <&pll CLK_TWPLL_128M>,
+          <&pll CLK_TWPLL_384M>;
+
+        dpu_port: port {
+            dpu_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
new file mode 100644
index 0000000000..bc5594d186
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc MIPI DSI Controller
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dsi-host
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: clk_src_96m
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          A port node with endpoint definitions as defined in
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+          That port should be the input endpoint, usually coming from
+          the associated DPU.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dsi: dsi@63100000 {
+        compatible = "sprd,sharkl3-dsi-host";
+        reg = <0x63100000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_96m";
+        clocks = <&pll CLK_TWPLL_96M>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&dpu_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/ssd1289fb.txt b/Documentation/devicetree/bindings/display/ssd1289fb.txt
new file mode 100644
index 0000000000..4fcd5e68cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ssd1289fb.txt
@@ -0,0 +1,13 @@
+* Solomon SSD1289 Framebuffer Driver
+
+Required properties:
+  - compatible: Should be "solomon,ssd1289fb". The only supported bus for
+    now is lbc.
+  - reg: Should contain address of the controller on the LBC bus. The detail
+    was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
+
+Examples:
+display@2,0 {
+	compatible = "solomon,ssd1289fb";
+	reg = <0x2 0x0000 0x0004>;
+};
diff --git a/Documentation/devicetree/bindings/display/st,stih4xx.txt b/Documentation/devicetree/bindings/display/st,stih4xx.txt
new file mode 100644
index 0000000000..6778b3e7ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stih4xx.txt
@@ -0,0 +1,241 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+  Required properties:
+  - compatible: "st,vtg"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  Optional properties:
+  - interrupts : VTG interrupt number to the CPU.
+  - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+  Required properties:
+  - compatible: "st,vtac-main" or "st,vtac-aux"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+  This device must be the parent of all the sub-components and is responsible
+  of bind them.
+  Required properties:
+  - compatible: "st,sti-display-subsystem"
+  - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-compositor"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-tvout"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+
+- sti-hdmi: hdmi output block
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-hdmi";
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - interrupts : HDMI interrupt number to the CPU.
+  - interrupt-names: names of the interrupts listed in interrupts property in
+    the same order
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - ddc: phandle of an I2C controller used for DDC EDID probing
+
+sti-hda:
+  Required properties:
+  must be a child of sti-display-subsystem
+  - compatible: "st,stih<chip>-hda"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+
+sti-dvo:
+  Required properties:
+  must be a child of sti-display-subsystem
+  - compatible: "st,stih<chip>-dvo"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - pinctrl-0: pin control handle
+  - pinctrl-names: names of the pin control states to use
+  - sti,panel: phandle of the panel connected to the DVO output
+
+sti-hqvdp:
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-hqvdp"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle on vtg main device node.
+
+Example:
+
+/ {
+	...
+
+	vtg_main_slave: sti-vtg-main-slave@fe85a800 {
+		compatible	= "st,vtg";
+		reg		= <0xfe85A800 0x300>;
+		interrupts	= <GIC_SPI 175 IRQ_TYPE_NONE>;
+	};
+
+	vtg_main: sti-vtg-main-master@fd348000 {
+		compatible	= "st,vtg";
+		reg		= <0xfd348000 0x400>;
+		st,slave	= <&vtg_main_slave>;
+	};
+
+	vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+		compatible	= "st,vtg";
+		reg		= <0xfe858200 0x300>;
+		interrupts	= <GIC_SPI 176 IRQ_TYPE_NONE>;
+	};
+
+	vtg_aux: sti-vtg-aux-master@fd348400 {
+		compatible	= "st,vtg";
+		reg		= <0xfd348400 0x400>;
+		st,slave	= <&vtg_aux_slave>;
+	};
+
+
+	sti-vtac-rx-main@fee82800 {
+		compatible	= "st,vtac-main";
+		reg		= <0xfee82800 0x200>;
+		clock-names     = "vtac";
+		clocks          = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
+	};
+
+	sti-vtac-rx-aux@fee82a00 {
+		compatible	= "st,vtac-aux";
+		reg		= <0xfee82a00 0x200>;
+		clock-names     = "vtac";
+		clocks          = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
+	};
+
+	sti-vtac-tx-main@fd349000 {
+		compatible	= "st,vtac-main";
+		reg		= <0xfd349000 0x200>, <0xfd320000 0x10000>;
+		clock-names     = "vtac";
+		clocks           = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+	};
+
+	sti-vtac-tx-aux@fd349200 {
+		compatible	= "st,vtac-aux";
+		reg		= <0xfd349200 0x200>, <0xfd320000 0x10000>;
+		clock-names     = "vtac";
+		clocks          = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+	};
+
+	sti-display-subsystem {
+		compatible = "st,sti-display-subsystem";
+		ranges;
+
+		sti-compositor@fd340000 {
+			compatible	= "st,stih416-compositor";
+			reg		= <0xfd340000 0x1000>;
+			clock-names	= "compo_main", "compo_aux",
+			                  "pix_main", "pix_aux";
+			clocks          = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
+					  <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
+			reset-names     = "compo-main", "compo-aux";
+			resets          = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+			st,vtg		= <&vtg_main>, <&vtg_aux>;
+		};
+
+		sti-tvout@fe000000 {
+			compatible	= "st,stih416-tvout";
+			reg		= <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+			reg-names	= "tvout-reg", "hda-reg", "syscfg";
+			reset-names     = "tvout";
+			resets          = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+		};
+
+		sti-hdmi@fe85c000 {
+			compatible	= "st,stih416-hdmi";
+			reg		= <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+			reg-names	= "hdmi-reg", "syscfg";
+			interrupts	= <GIC_SPI 173 IRQ_TYPE_NONE>;
+			interrupt-names	= "irq";
+			clock-names	= "pix", "tmds", "phy", "audio";
+			clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+		};
+
+		sti-hda@fe85a000 {
+			compatible	= "st,stih416-hda";
+			reg		= <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+			reg-names	= "hda-reg", "video-dacs-ctrl";
+			clock-names	= "pix", "hddac";
+			clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+		};
+
+		sti-dvo@8d00400 {
+			compatible	= "st,stih407-dvo";
+			reg		= <0x8d00400 0x200>;
+			reg-names	= "dvo-reg";
+			clock-names	= "dvo_pix", "dvo",
+					  "main_parent", "aux_parent";
+			clocks		= <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+					  <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_dvo>;
+			sti,panel	= <&panel_dvo>;
+		};
+
+		sti-hqvdp@9c000000 {
+				compatible	= "st,stih407-hqvdp";
+				reg		= <0x9C00000 0x100000>;
+				clock-names	= "hqvdp", "pix_main";
+				clocks		= <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names     = "hqvdp";
+				resets          = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg		= <&vtg_main>;
+		};
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
new file mode 100644
index 0000000000..53560052aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DSI host controller
+
+maintainers:
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+
+description:
+  The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
+
+allOf:
+  - $ref: dsi-controller.yaml#
+
+properties:
+  compatible:
+    const: st,stm32-dsi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: DSI bus clock
+      - description: Pixel clock
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+      - const: px_clk
+    minItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: apb
+
+  phy-dsi-supply:
+    description:
+      Phandle of the regulator that provides the supply voltage.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DSI input port node, connected to the ltdc rgb output port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          DSI output port node, connected to a panel or a bridge input port.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/gpio/gpio.h>
+    dsi: dsi@5a000000 {
+        compatible = "st,stm32-dsi";
+        reg = <0x5a000000 0x800>;
+        clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+        clock-names = "pclk", "ref", "px_clk";
+        resets = <&rcc DSI_R>;
+        reset-names = "apb";
+        phy-dsi-supply = <&reg18>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                    reg = <0>;
+                    dsi_in: endpoint {
+                        remote-endpoint = <&ltdc_ep1_out>;
+                    };
+              };
+
+              port@1 {
+                    reg = <1>;
+                    dsi_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+              };
+        };
+
+        panel@0 {
+              compatible = "orisetech,otm8009a";
+              reg = <0>;
+              reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+              power-supply = <&v3v3>;
+
+              port {
+                    panel_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+              };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
new file mode 100644
index 0000000000..d6ea4d62a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 lcd-tft display controller
+
+maintainers:
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-ltdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: events interrupt line.
+      - description: errors interrupt line.
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lcd
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Video port for DPI RGB output.
+      ltdc has one video port with up to 2 endpoints:
+      - for external dpi rgb panel or bridge, using gpios.
+      - for internal dpi input of the MIPI DSI host controller.
+      Note: These 2 endpoints cannot be activated simultaneously.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    ltdc: display-controller@40016800 {
+        compatible = "st,stm32-ltdc";
+        reg = <0x5a001000 0x400>;
+        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc LTDC_PX>;
+        clock-names = "lcd";
+        resets = <&rcc LTDC_R>;
+
+        port {
+             ltdc_out_dsi: endpoint {
+                     remote-endpoint = <&dsi_in>;
+             };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
new file mode 100644
index 0000000000..564ea845c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ste,mcde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Multi Channel Display Engine MCDE
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: ste,mcde
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: an array of the MCDE clocks
+    items:
+      - description: MCDECLK (main MCDE clock)
+      - description: LCDCLK (LCD clock)
+      - description: PLLDSI (HDMI clock)
+
+  clock-names:
+    items:
+      - const: mcde
+      - const: lcd
+      - const: hdmi
+
+  resets:
+    maxItems: 1
+
+  epod-supply:
+    description: a phandle to the EPOD regulator
+
+  vana-supply:
+    description: a phandle to the analog voltage regulator
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A DPI port node
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^dsi@[0-9a-f]+$":
+    description: subnodes for the three DSI host adapters
+    type: object
+    $ref: dsi-controller.yaml#
+
+    properties:
+      compatible:
+        const: ste,mcde-dsi
+
+      reg:
+        maxItems: 1
+
+      vana-supply:
+        description: a phandle to the analog voltage regulator
+
+      clocks:
+        description: phandles to the high speed and low power (energy save) clocks
+          the high speed clock is not present on the third (dsi2) block, so it
+          should only have the "lp" clock
+        minItems: 1
+        maxItems: 2
+
+      clock-names:
+        oneOf:
+          - items:
+              - const: hs
+              - const: lp
+          - items:
+              - const: lp
+
+    required:
+      - compatible
+      - reg
+      - vana-supply
+      - clocks
+      - clock-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - epod-supply
+  - vana-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mcde@a0350000 {
+      compatible = "ste,mcde";
+      reg = <0xa0350000 0x1000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      epod-supply = <&db8500_b2r2_mcde_reg>;
+      vana-supply = <&ab8500_ldo_ana_reg>;
+      clocks = <&prcmu_clk PRCMU_MCDECLK>,
+               <&prcmu_clk PRCMU_LCDCLK>,
+               <&prcmu_clk PRCMU_PLLDSI>;
+      clock-names = "mcde", "lcd", "hdmi";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      dsi0: dsi@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+          compatible = "samsung,s6d16d0";
+          reg = <0>;
+          vdd1-supply = <&ab8500_ldo_aux1_reg>;
+          reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+      };
+
+      dsi1: dsi@a0352000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0352000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+        clock-names = "hs", "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+      dsi2: dsi@a0353000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0353000 0x1000>;
+        vana-supply = <&ab8500_ldo_ana_reg>;
+        /* This DSI port only has the Low Power / Energy Save clock */
+        clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+        clock-names = "lp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 0000000000..f448624dd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mipi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra114-mipi
+      - nvidia,tegra210-mipi
+      - nvidia,tegra186-mipi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: mipi-cal
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description: The number of cells in a MIPI calibration specifier.
+      Should be 1. The single cell specifies a bitmask of the pads that
+      need to be calibrated for a given device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#nvidia,mipi-calibrate-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+
+    mipi@700e3000 {
+        compatible = "nvidia,tegra114-mipi";
+        reg = <0x700e3000 0x100>;
+        clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+        clock-names = "mipi-cal";
+        #nvidia,mipi-calibrate-cells = <1>;
+    };
+
+    dsia: dsi@54300000 {
+        compatible = "nvidia,tegra114-dsi";
+        reg = <0x54300000 0x00040000>;
+        clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+                 <&tegra_car TEGRA114_CLK_DSIALP>,
+                 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&tegra_car 48>;
+        reset-names = "dsi";
+        nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 0000000000..5cdbc527a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+  pins which can be assigned to either the DPAUX channel or to an I2C
+  controller.
+
+  When configured for DisplayPort AUX operation, the DPAUX controller
+  can also be used to communicate with a DisplayPort device using the
+  AUX channel.
+
+properties:
+  $nodename:
+    pattern: "^dpaux@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-dpaux
+          - nvidia,tegra210-dpaux
+          - nvidia,tegra186-dpaux
+          - nvidia,tegra194-dpaux
+
+      - items:
+          - const: nvidia,tegra132-dpaux
+          - const: nvidia,tegra124-dpaux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the DPAUX hardware
+      - description: reference clock
+
+  clock-names:
+    items:
+      - const: dpaux
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dpaux
+
+  power-domains:
+    maxItems: 1
+
+  i2c-bus:
+    description: Subnode where I2C slave devices are listed. This
+      subnode must be always present. If there are no I2C slave
+      devices, an empty node should be added. See ../../i2c/i2c.yaml
+      for more information.
+    type: object
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  vdd-supply:
+    description: phandle of a supply that powers the DisplayPort
+      link
+
+patternProperties:
+  "^pinmux-[a-z0-9]+$":
+    description:
+      Since only three configurations are possible, only three child
+      nodes are needed to describe the pin mux'ing options for the
+      DPAUX pads. Furthermore, given that the pad functions are only
+      applicable to a single set of pads, the child nodes only need
+      to describe the pad group the functions are being applied to
+      rather than the individual pads.
+    type: object
+    properties:
+      groups:
+        const: dpaux-io
+
+      function:
+        enum:
+          - aux
+          - i2c
+          - off
+
+    additionalProperties: false
+
+    required:
+      - groups
+      - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dpaux: dpaux@545c0000 {
+        compatible = "nvidia,tegra210-dpaux";
+        reg = <0x545c0000 0x00040000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>;
+        clock-names = "dpaux", "parent";
+        resets = <&tegra_car 181>;
+        reset-names = "dpaux";
+        power-domains = <&pd_sor>;
+
+        state_dpaux_aux: pinmux-aux {
+            groups = "dpaux-io";
+            function = "aux";
+        };
+
+        state_dpaux_i2c: pinmux-i2c {
+            groups = "dpaux-io";
+            function = "i2c";
+        };
+
+        state_dpaux_off: pinmux-off {
+            groups = "dpaux-io";
+            function = "off";
+        };
+
+        i2c-bus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 0000000000..6f2e224719
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+  and DP outputs.
+
+properties:
+  $nodename:
+    pattern: "^sor@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-sor
+          - nvidia,tegra210-sor
+          - nvidia,tegra210-sor1
+          - nvidia,tegra186-sor
+          - nvidia,tegra186-sor1
+          - nvidia,tegra194-sor
+
+      - items:
+          - const: nvidia,tegra132-sor
+          - const: nvidia,tegra124-sor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    maxItems: 6
+
+  clock-names:
+    minItems: 5
+    maxItems: 6
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sor
+
+  power-domains:
+    maxItems: 1
+
+  avdd-io-hdmi-dp-supply:
+    description: I/O supply for HDMI/DP
+
+  vdd-hdmi-dp-pll-supply:
+    description: PLL supply for HDMI/DP
+
+  hdmi-supply:
+    description: +5.0V HDMI connector supply, required for HDMI
+
+  # Tegra186 and later
+  nvidia,interface:
+    description: index of the SOR interface
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel, required for eDP
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,xbar-cfg:
+    description: 5 cells containing the crossbar configuration.
+      Each lane of the SOR, identified by the cell's index, is
+      mapped via the crossbar to the pad specified by the cell's
+      value.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  # optional when driving an eDP output
+  nvidia,dpaux:
+    description: phandle to a DisplayPort AUX interface
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sor
+              - nvidia,tegra194-sor
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+            - description: SOR pad output clock
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+            - const: pad
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - avdd-io-hdmi-dp-supply
+  - vdd-hdmi-dp-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sor0: sor@54540000 {
+        compatible = "nvidia,tegra210-sor";
+        reg = <0x54540000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>,
+                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+        clock-names = "sor", "out", "parent", "dp", "safe";
+        resets = <&tegra_car 182>;
+        reset-names = "sor";
+        pinctrl-0 = <&state_dpaux_aux>;
+        pinctrl-1 = <&state_dpaux_i2c>;
+        pinctrl-2 = <&state_dpaux_off>;
+        pinctrl-names = "aux", "i2c", "off";
+        power-domains = <&pd_sor>;
+
+        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+        hdmi-supply = <&vdd_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 0000000000..7200095ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vic@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-vic
+          - nvidia,tegra210-vic
+          - nvidia,tegra186-vic
+          - nvidia,tegra194-vic
+          - nvidia,tegra234-vic
+
+      - items:
+          - const: nvidia,tegra132-vic
+          - const: nvidia,tegra124-vic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the VIC hardware
+
+  clock-names:
+    items:
+      - const: vic
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vic
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the VIC;
+      see ../interconnect/interconnect.txt for details.
+    items:
+      - description: memory read client for VIC
+      - description: memory write client for VIC
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 0000000000..ce4589466a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-dc
+      - nvidia,tegra194-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: display controller pixel clock
+
+  clock-names:
+    items:
+      - const: dc
+
+  resets:
+    items:
+      - description: display controller reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the
+      display controller; see ../interconnect/interconnect.txt
+      for details.
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read-0
+      - const: read-1
+
+  nvidia,outputs:
+    description: A list of phandles of outputs that this display
+      controller can drive.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  nvidia,head:
+    description: The number of the display controller head. This
+      is used to setup the various types of output to receive
+      video data from the given head.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,outputs
+  - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 0000000000..117c371ce2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display-hub@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-display
+      - nvidia,tegra194-display
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: display hub reset
+      - description: window group 0 reset
+      - description: window group 1 reset
+      - description: window group 2 reset
+      - description: window group 3 reset
+      - description: window group 4 reset
+      - description: window group 5 reset
+
+  reset-names:
+    items:
+      - const: misc
+      - const: wgrp0
+      - const: wgrp1
+      - const: wgrp2
+      - const: wgrp3
+      - const: wgrp4
+      - const: wgrp5
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  "^display@[0-9a-f]+$":
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-display
+    then:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display stream compression clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: dsc
+            - const: hub
+    else:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: hub
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra186-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "dsc", "hub";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&sor0 &sor1>;
+            nvidia,head = <2>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra194-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "hub";
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <2>;
+        };
+
+        display@15230000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15230000 0x10000>;
+            interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 0000000000..da75b71e8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^padctl@[0-9a-f]+$"
+
+  compatible:
+    const: nvidia,tegra186-dsi-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+allOf:
+  - $ref: /schemas/reset/reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@15880000 {
+        compatible = "nvidia,tegra186-dsi-padctl";
+        reg = <0x15880000 0x10000>;
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 0000000000..69be95afd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^dc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dc
+          - nvidia,tegra30-dc
+          - nvidia,tegra114-dc
+          - nvidia,tegra124-dc
+          - nvidia,tegra210-dc
+
+      - items:
+          - const: nvidia,tegra124-dc
+          - const: nvidia,tegra132-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: display controller pixel clock
+      - description: parent clock # optional
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: dc
+      - const: parent # optional
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  interconnect-names: true
+  interconnects: true
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  memory-region: true
+
+  nvidia,head:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of the display controller head. This is used to setup the various
+      types of output to receive video data from the given head.
+
+  nvidia,outputs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A list of phandles of outputs that this display controller can drive.
+
+  rgb:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dc
+              - nvidia,tegra30-dc
+              - nvidia,tegra114-dc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window B memory client (vertical filter)
+            - description: window C memory client
+            - description: cursor memory client
+
+        interconnect-names:
+          items:
+            - const: wina
+            - const: winb
+            - const: winb-vfilter
+            - const: winc
+            - const: cursor
+
+        rgb:
+          description: Each display controller node has a child node, named "rgb", that represents
+            the RGB output associated with the controller.
+          type: object
+          properties:
+            nvidia,ddc-i2c-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of an I2C controller used for DDC EDID probing
+
+            nvidia,hpd-gpio:
+              description: specifies a GPIO used for hotplug detection
+              maxItems: 1
+
+            nvidia,edid:
+              $ref: /schemas/types.yaml#/definitions/uint8-array
+              description: supplies a binary EDID blob
+
+            nvidia,panel:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of a display panel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-dc
+    then:
+      properties:
+        interconnects:
+          minItems: 4
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window C memory client
+            - description: cursor memory client
+            - description: window D memory client
+            - description: window T memory client
+
+        interconnect-names:
+          minItems: 4
+          items:
+            - const: wina
+            - const: winb
+            - const: winc
+            - const: cursor
+            - const: wind
+            - const: wint
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dc@54200000 {
+        compatible = "nvidia,tegra20-dc";
+        reg = <0x54200000 0x00040000>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+        clock-names = "dc";
+        resets = <&tegra_car 27>;
+        reset-names = "dc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 0000000000..59e1dc0813
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dsi
+          - nvidia,tegra30-dsi
+          - nvidia,tegra114-dsi
+          - nvidia,tegra124-dsi
+          - nvidia,tegra210-dsi
+          - nvidia,tegra186-dsi
+
+      - items:
+          - const: nvidia,tegra132-dsi
+          - const: nvidia,tegra124-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: phandle of a supply that powers the DSI controller
+
+  nvidia,mipi-calibrate:
+    description: Should contain a phandle and a specifier specifying
+      which pads are used by this DSI output and need to be
+      calibrated. See nvidia,tegra114-mipi.yaml for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,ganged-mode:
+    description: contains a phandle to a second DSI controller to
+      gang up with in order to support up to 8 data lanes
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: parent
+    else:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: low-power module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: lp
+            - const: parent
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-dsi
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dsi@15300000 {
+        compatible = "nvidia,tegra186-dsi";
+        reg = <0x15300000 0x10000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_DSI>,
+                 <&bpmp TEGRA186_CLK_DSIA_LP>,
+                 <&bpmp TEGRA186_CLK_PLLD>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 0000000000..3c095a5491
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^epp@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-epp
+      - nvidia,tegra30-epp
+      - nvidia,tegra114-epp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: epp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    epp@540c0000 {
+        compatible = "nvidia,tegra20-epp";
+        reg = <0x540c0000 0x00040000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+        resets = <&tegra_car 19>;
+        reset-names = "epp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 0000000000..1026b0bc3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr2d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr2d
+      - nvidia,tegra30-gr2d
+      - nvidia,tegra114-gr2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    items:
+      - const: 2d
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr2d@54140000 {
+        compatible = "nvidia,tegra20-gr2d";
+        reg = <0x54140000 0x00040000>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+        resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+        reset-names = "2d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 0000000000..59a52e732c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr3d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr3d
+      - nvidia,tegra30-gr3d
+      - nvidia,tegra114-gr3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 2
+    maxItems: 4
+
+  reset-names:
+    minItems: 2
+    maxItems: 4
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    minItems: 4
+    maxItems: 10
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 10
+
+  operating-points-v2: true
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 4
+          maxItems: 4
+
+        interconnect-names:
+          minItems: 4
+          maxItems: 4
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gr3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary module clock
+            - description: secondary module clock
+
+        clock-names:
+          items:
+            - const: 3d
+            - const: 3d2
+
+        resets:
+          items:
+            - description: primary module reset
+            - description: secondary module reset
+            - description: primary memory client hotflush reset
+            - description: secondary memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: 3d2
+            - const: mc
+            - const: mc2
+
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+        interconnects:
+          minItems: 8
+          maxItems: 8
+
+        interconnect-names:
+          minItems: 8
+          maxItems: 8
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+            - description: phandle to the TD2 power domain
+
+        power-domain-names:
+          items:
+            - const: 3d0
+            - const: 3d1
+
+      dependencies:
+        power-domains: [ power-domain-names ]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 10
+          maxItems: 10
+
+        interconnect-names:
+          minItems: 10
+          maxItems: 10
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr3d@54180000 {
+        compatible = "nvidia,tegra20-gr3d";
+        reg = <0x54180000 0x00040000>;
+        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+        resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+        reset-names = "3d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 0000000000..f77197e486
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hdmi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hdmi
+          - nvidia,tegra30-hdmi
+          - nvidia,tegra114-hdmi
+          - nvidia,tegra124-hdmi
+
+      - items:
+          - const: nvidia,tegra132-hdmi
+          - const: nvidia,tegra124-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: hdmi
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  hdmi-supply:
+    description: supply for the +5V HDMI connector pin
+
+  vdd-supply:
+    description: regulator for supply voltage
+
+  pll-supply:
+    description: regulator for PLL
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "#sound-dai-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - pll-supply
+  - vdd-supply
+  - nvidia,ddc-i2c-bus
+  - nvidia,hpd-gpio
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    hdmi@54280000 {
+        compatible = "nvidia,tegra124-hdmi";
+        reg = <0x54280000 0x00040000>;
+        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+                 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+        clock-names = "hdmi", "parent";
+        resets = <&tegra_car 51>;
+        reset-names = "hdmi";
+
+        hdmi-supply = <&vdd_5v0_hdmi>;
+        pll-supply = <&vdd_hdmi_pll>;
+        vdd-supply = <&vdd_3v3_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 0000000000..94c5242c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,430 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+  representing one of the host1x client modules defined in this binding.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-host1x
+          - nvidia,tegra30-host1x
+          - nvidia,tegra114-host1x
+          - nvidia,tegra124-host1x
+          - nvidia,tegra210-host1x
+          - nvidia,tegra186-host1x
+          - nvidia,tegra194-host1x
+          - nvidia,tegra234-host1x
+
+      - items:
+          - const: nvidia,tegra132-host1x
+          - const: nvidia,tegra124-host1x
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 9
+
+  '#address-cells':
+    description: The number of cells used to represent physical base addresses
+      in the host1x address space.
+    enum: [1, 2]
+
+  '#size-cells':
+    description: The number of cells used to represent the size of an address
+      range in the host1x address space.
+    enum: [1, 2]
+
+  ranges:
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock. See
+      ../clocks/clock-bindings.txt for details.
+
+  clock-names:
+    items:
+      - const: host1x
+
+  resets:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - const: host1x
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client for host1x
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-host1x
+              - nvidia,tegra30-host1x
+              - nvidia,tegra114-host1x
+              - nvidia,tegra124-host1x
+              - nvidia,tegra210-host1x
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-host1x
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          maxItems: 1
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: common
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by host1x server
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt 0
+            - description: host1x syncpoint interrupt 1
+            - description: host1x syncpoint interrupt 2
+            - description: host1x syncpoint interrupt 3
+            - description: host1x syncpoint interrupt 4
+            - description: host1x syncpoint interrupt 5
+            - description: host1x syncpoint interrupt 6
+            - description: host1x syncpoint interrupt 7
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt0
+            - const: syncpt1
+            - const: syncpt2
+            - const: syncpt3
+            - const: syncpt4
+            - const: syncpt5
+            - const: syncpt6
+            - const: syncpt7
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra20-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <0 65 0x04>, /* mpcore syncpt */
+                     <0 67 0x04>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+        reset-names = "host1x", "mc";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x04000000>;
+
+        mpe@54040000 {
+            compatible = "nvidia,tegra20-mpe";
+            reg = <0x54040000 0x00040000>;
+            interrupts = <0 68 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_MPE>;
+            resets = <&tegra_car 60>;
+            reset-names = "mpe";
+        };
+
+        vi@54080000 {
+            compatible = "nvidia,tegra20-vi";
+            reg = <0x54080000 0x00040000>;
+            interrupts = <0 69 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_VI>;
+            resets = <&tegra_car 100>;
+            reset-names = "vi";
+        };
+
+        epp@540c0000 {
+            compatible = "nvidia,tegra20-epp";
+            reg = <0x540c0000 0x00040000>;
+            interrupts = <0 70 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_EPP>;
+            resets = <&tegra_car 19>;
+            reset-names = "epp";
+        };
+
+        isp@54100000 {
+            compatible = "nvidia,tegra20-isp";
+            reg = <0x54100000 0x00040000>;
+            interrupts = <0 71 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_ISP>;
+            resets = <&tegra_car 23>;
+            reset-names = "isp";
+        };
+
+        gr2d@54140000 {
+            compatible = "nvidia,tegra20-gr2d";
+            reg = <0x54140000 0x00040000>;
+            interrupts = <0 72 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+            resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+            reset-names = "2d", "mc";
+        };
+
+        gr3d@54180000 {
+            compatible = "nvidia,tegra20-gr3d";
+            reg = <0x54180000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+            resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+            reset-names = "3d", "mc";
+        };
+
+        dc@54200000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54200000 0x00040000>;
+            interrupts = <0 73 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+            clock-names = "dc";
+            resets = <&tegra_car 27>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        dc@54240000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54240000 0x00040000>;
+            interrupts = <0 74 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+            clock-names = "dc";
+            resets = <&tegra_car 26>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        hdmi@54280000 {
+            compatible = "nvidia,tegra20-hdmi";
+            reg = <0x54280000 0x00040000>;
+            interrupts = <0 75 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "hdmi", "parent";
+            resets = <&tegra_car 51>;
+            reset-names = "hdmi";
+
+            hdmi-supply = <&vdd_5v0_hdmi>;
+            pll-supply = <&vdd_hdmi_pll>;
+            vdd-supply = <&vdd_3v3_hdmi>;
+
+            nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+            nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+        };
+
+        tvo@542c0000 {
+            compatible = "nvidia,tegra20-tvo";
+            reg = <0x542c0000 0x00040000>;
+            interrupts = <0 76 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_TVO>;
+        };
+
+        dsi@54300000 {
+            compatible = "nvidia,tegra20-dsi";
+            reg = <0x54300000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "dsi", "parent";
+            resets = <&tegra_car 48>;
+            reset-names = "dsi";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra210-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra210-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x01000000>;
+        iommus = <&mc TEGRA_SWGROUP_HC>;
+
+        vi@54080000 {
+            compatible = "nvidia,tegra210-vi";
+            reg = <0x54080000 0x00000700>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+            clocks = <&tegra_car TEGRA210_CLK_VI>;
+            power-domains = <&pd_venc>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ranges = <0x0 0x54080000 0x2000>;
+
+            csi@838 {
+                compatible = "nvidia,tegra210-csi";
+                reg = <0x838 0x1300>;
+                assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                                  <&tegra_car TEGRA210_CLK_CILCD>,
+                                  <&tegra_car TEGRA210_CLK_CILE>,
+                                  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>;
+                assigned-clock-rates = <102000000>,
+                                       <102000000>,
+                                       <102000000>,
+                                       <972000000>;
+
+                clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                         <&tegra_car TEGRA210_CLK_CILAB>,
+                         <&tegra_car TEGRA210_CLK_CILCD>,
+                         <&tegra_car TEGRA210_CLK_CILE>,
+                         <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+                power-domains = <&pd_sor>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 0000000000..3bc3b22e98
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-isp
+      - nvidia,tegra30-isp
+      - nvidia,tegra210-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: isp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # write
+
+  power-domains:
+    items:
+      - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@54100000 {
+        compatible = "nvidia,tegra20-isp";
+        reg = <0x54100000 0x00040000>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+        resets = <&tegra_car 23>;
+        reset-names = "isp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 0000000000..2cd3e60cd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mpe@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-mpe
+      - nvidia,tegra30-mpe
+      - nvidia,tegra114-mpe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: mpe
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 6
+
+  interconnect-names:
+    maxItems: 6
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mpe@54040000 {
+        compatible = "nvidia,tegra20-mpe";
+        reg = <0x54040000 0x00040000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+        resets = <&tegra_car 60>;
+        reset-names = "mpe";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 0000000000..6c84d8b7eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^tvo@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-tvo
+      - nvidia,tegra30-tvo
+      - nvidia,tegra114-tvo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tvo@542c0000 {
+        compatible = "nvidia,tegra20-tvo";
+        reg = <0x542c0000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_TVO>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 0000000000..2181855a09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-vi
+      - const: nvidia,tegra30-vi
+      - const: nvidia,tegra114-vi
+      - const: nvidia,tegra124-vi
+      - items:
+          - const: nvidia,tegra132-vi
+          - const: nvidia,tegra124-vi
+      - const: nvidia,tegra210-vi
+      - const: nvidia,tegra186-vi
+      - const: nvidia,tegra194-vi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vi
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 5
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 5
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the VENC power domain
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+  vip:
+    $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input from the VIP (parallel input capture) module
+
+patternProperties:
+  "^csi@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-vi
+              - nvidia,tegra30-vi
+              - nvidia,tegra114-vi
+              - nvidia,tegra124-vi
+    then:
+      required:
+        - resets
+        - reset-names
+    else:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        camera@48 {
+            compatible = "aptina,mt9v111";
+            reg = <0x48>;
+            clocks = <&camera_clk>;
+
+            port {
+                mt9v111_out: endpoint {
+                    remote-endpoint = <&vi_vip_in>;
+                };
+            };
+        };
+    };
+
+    vi@54080000 {
+        compatible = "nvidia,tegra20-vi";
+        reg = <0x54080000 0x00040000>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_VI>;
+        resets = <&tegra_car 100>;
+        reset-names = "vi";
+
+        vip {
+            compatible = "nvidia,tegra20-vip";
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    vi_vip_in: endpoint {
+                        remote-endpoint = <&mt9v111_out>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    vi_vip_out: endpoint {
+                        remote-endpoint = <&vi_in>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vi_in: endpoint {
+                    remote-endpoint = <&vi_vip_out>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra210-vi";
+        reg = <0x54080000 0x00000700>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+        clocks = <&tegra_car TEGRA210_CLK_VI>;
+        power-domains = <&pd_venc>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x0 0x54080000 0x2000>;
+
+        csi@838 {
+            compatible = "nvidia,tegra210-csi";
+            reg = <0x838 0x1300>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                              <&tegra_car TEGRA210_CLK_CILCD>,
+                              <&tegra_car TEGRA210_CLK_CILE>,
+                              <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>;
+            assigned-clock-rates = <102000000>,
+                                   <102000000>,
+                                   <102000000>,
+                                   <972000000>;
+
+            clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                     <&tegra_car TEGRA210_CLK_CILAB>,
+                     <&tegra_car TEGRA210_CLK_CILCD>,
+                     <&tegra_car TEGRA210_CLK_CILE>,
+                     <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+            power-domains = <&pd_sor>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
new file mode 100644
index 0000000000..14294edb8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra VIP (parallel video capture) controller
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-vip
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port receiving the video stream from the sensor
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port sending the video stream to the VI
+
+    required:
+      - port@0
+      - port@1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - ports
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 0000000000..fa07a40d10
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^csi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: A/B lanes clock
+      - description: C/D lanes clock
+      - description: E lane clock
+      - description: test pattern generator clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: cilab
+      - const: cilcd
+      - const: cile
+      - const: csi_tpg
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
new file mode 100644
index 0000000000..ae09cd3cbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM65x Display Subsystem
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+  The AM625 and AM65x TI Keystone Display SubSystem with two output
+  ports and two video planes. In AM65x DSS, the first video port
+  supports 1 OLDI TX and in AM625 DSS, the first video port output is
+  internally routed to 2 OLDI TXes. The second video port supports DPI
+  format. The first plane is full video plane with all features and the
+  second is a "lite plane" without scaling support.
+
+properties:
+  compatible:
+    enum:
+      - ti,am625-dss
+      - ti,am65x-dss
+
+  reg:
+    description:
+      Addresses to each DSS memory region described in the SoC's TRM.
+    items:
+      - description: common DSS register area
+      - description: VIDL1 light video plane
+      - description: VID video plane
+      - description: OVR1 overlay manager for vp1
+      - description: OVR2 overlay manager for vp2
+      - description: VP1 video port 1
+      - description: VP2 video port 2
+
+  reg-names:
+    items:
+      - const: common
+      - const: vidl1
+      - const: vid
+      - const: ovr1
+      - const: ovr2
+      - const: vp1
+      - const: vp2
+
+  clocks:
+    items:
+      - description: fck DSS functional clock
+      - description: vp1 Video Port 1 pixel clock
+      - description: vp2 Video Port 2 pixel clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: vp1
+      - const: vp2
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 3
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  dma-coherent:
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          For AM65x DSS, the OLDI output port node from video port 1.
+          For AM625 DSS, the internal DPI output port node from video
+          port 1.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The DSS DPI output port node from video port 2
+
+  ti,am65x-oldi-io-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to syscon device node mapping OLDI IO_CTRL registers.
+      The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
+      following OLDI_DAT1_IO_CTRL, OLDI_DAT2_IO_CTRL, OLDI_DAT3_IO_CTRL,
+      and OLDI_CLK_IO_CTRL registers. This property is needed for OLDI
+      interface to work.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input memory (from main memory to dispc) bandwidth limit in
+      bytes per second
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dss: dss@4a00000 {
+            compatible = "ti,am65x-dss";
+            reg =   <0x04a00000 0x1000>, /* common */
+                    <0x04a02000 0x1000>, /* vidl1 */
+                    <0x04a06000 0x1000>, /* vid */
+                    <0x04a07000 0x1000>, /* ovr1 */
+                    <0x04a08000 0x1000>, /* ovr2 */
+                    <0x04a0a000 0x1000>, /* vp1 */
+                    <0x04a0b000 0x1000>; /* vp2 */
+            reg-names = "common", "vidl1", "vid",
+                    "ovr1", "ovr2", "vp1", "vp2";
+            ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+            power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+            clocks =        <&k3_clks 67 1>,
+                            <&k3_clks 216 1>,
+                            <&k3_clks 67 2>;
+            clock-names = "fck", "vp1", "vp2";
+            interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                            reg = <0>;
+                            oldi_out0: endpoint {
+                                    remote-endpoint = <&lcd_in0>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt
new file mode 100644
index 0000000000..91279f1060
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt
@@ -0,0 +1,74 @@
+Texas Instruments DRA7x Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,dra7-dss"
+- reg: address and length of the register spaces for 'dss'
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+- syscon: phandle to control module core syscon node
+
+Optional properties:
+
+Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties
+can be used to describe the video PLLs:
+
+- reg: address and length of the register spaces for 'pll1_clkctrl',
+  'pll1', 'pll2_clkctrl', 'pll2'
+- clocks: handle to video1 pll clock and video2 pll clock
+- clock-names: "video1_clk" and "video2_clk"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,dra7-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,dra7-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
new file mode 100644
index 0000000000..fad7cba58d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J721E Display Subsystem
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+  The J721E TI Keystone Display SubSystem with four output ports and
+  four video planes. There is two full video planes and two "lite
+  planes" without scaling support. The video ports can be connected to
+  the SoC's DPI pins or to integrated display bridges on the SoC.
+
+properties:
+  compatible:
+    const: ti,j721e-dss
+
+  reg:
+    items:
+      - description: common_m DSS Master common
+      - description: common_s0 DSS Shared common 0
+      - description: common_s1 DSS Shared common 1
+      - description: common_s2 DSS Shared common 2
+      - description: VIDL1 light video plane 1
+      - description: VIDL2 light video plane 2
+      - description: VID1 video plane 1
+      - description: VID1 video plane 2
+      - description: OVR1 overlay manager for vp1
+      - description: OVR2 overlay manager for vp2
+      - description: OVR3 overlay manager for vp3
+      - description: OVR4 overlay manager for vp4
+      - description: VP1 video port 1
+      - description: VP2 video port 2
+      - description: VP3 video port 3
+      - description: VP4 video port 4
+      - description: WB Write Back
+
+  reg-names:
+    items:
+      - const: common_m
+      - const: common_s0
+      - const: common_s1
+      - const: common_s2
+      - const: vidl1
+      - const: vidl2
+      - const: vid1
+      - const: vid2
+      - const: ovr1
+      - const: ovr2
+      - const: ovr3
+      - const: ovr4
+      - const: vp1
+      - const: vp2
+      - const: vp3
+      - const: vp4
+      - const: wb
+
+  clocks:
+    items:
+      - description: fck DSS functional clock
+      - description: vp1 Video Port 1 pixel clock
+      - description: vp2 Video Port 2 pixel clock
+      - description: vp3 Video Port 3 pixel clock
+      - description: vp4 Video Port 4 pixel clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: vp1
+      - const: vp2
+      - const: vp3
+      - const: vp4
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    items:
+      - description: common_m DSS Master common
+      - description: common_s0 DSS Shared common 0
+      - description: common_s1 DSS Shared common 1
+      - description: common_s2 DSS Shared common 2
+
+  interrupt-names:
+    items:
+      - const: common_m
+      - const: common_s0
+      - const: common_s1
+      - const: common_s2
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  dma-coherent:
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node form video port 1
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node from video port 2
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node from video port 3
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The output port node from video port 4
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input memory (from main memory to dispc) bandwidth limit in
+      bytes per second
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dss: dss@4a00000 {
+            compatible = "ti,j721e-dss";
+            reg =   <0x04a00000 0x10000>, /* common_m */
+                    <0x04a10000 0x10000>, /* common_s0*/
+                    <0x04b00000 0x10000>, /* common_s1*/
+                    <0x04b10000 0x10000>, /* common_s2*/
+                    <0x04a20000 0x10000>, /* vidl1 */
+                    <0x04a30000 0x10000>, /* vidl2 */
+                    <0x04a50000 0x10000>, /* vid1 */
+                    <0x04a60000 0x10000>, /* vid2 */
+                    <0x04a70000 0x10000>, /* ovr1 */
+                    <0x04a90000 0x10000>, /* ovr2 */
+                    <0x04ab0000 0x10000>, /* ovr3 */
+                    <0x04ad0000 0x10000>, /* ovr4 */
+                    <0x04a80000 0x10000>, /* vp1 */
+                    <0x04aa0000 0x10000>, /* vp2 */
+                    <0x04ac0000 0x10000>, /* vp3 */
+                    <0x04ae0000 0x10000>, /* vp4 */
+                    <0x04af0000 0x10000>; /* wb */
+            reg-names = "common_m", "common_s0",
+                    "common_s1", "common_s2",
+                    "vidl1", "vidl2","vid1","vid2",
+                    "ovr1", "ovr2", "ovr3", "ovr4",
+                    "vp1", "vp2", "vp3", "vp4",
+                    "wb";
+            clocks =        <&k3_clks 152 0>,
+                            <&k3_clks 152 1>,
+                            <&k3_clks 152 4>,
+                            <&k3_clks 152 9>,
+                            <&k3_clks 152 13>;
+            clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+            power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+            interrupts =    <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names =       "common_m",
+                                    "common_s0",
+                                    "common_s1",
+                                    "common_s2";
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                            reg = <0>;
+
+                            dpi_out_0: endpoint {
+                                    remote-endpoint = <&dp_bridge_input>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
new file mode 100644
index 0000000000..96b1439f88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K2G Display Subsystem
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+  - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+  The K2G DSS is an ultra-light version of TI Keystone Display
+  SubSystem. It has only one output port and video plane. The
+  output is DPI.
+
+properties:
+  compatible:
+    const: ti,k2g-dss
+
+  reg:
+    items:
+      - description: cfg DSS top level
+      - description: common DISPC common
+      - description: VID1 video plane 1
+      - description: OVR1 overlay manager for vp1
+      - description: VP1 video port 1
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: common
+      - const: vid1
+      - const: ovr1
+      - const: vp1
+
+  clocks:
+    items:
+      - description: fck DSS functional clock
+      - description: vp1 Video Port 1 pixel clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: vp1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      The DSS DPI output port node
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Input memory (from main memory to dispc) bandwidth limit in
+      bytes per second
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    dss: dss@2540000 {
+            compatible = "ti,k2g-dss";
+            reg =   <0x02540000 0x400>,
+                    <0x02550000 0x1000>,
+                    <0x02557000 0x1000>,
+                    <0x0255a800 0x100>,
+                    <0x0255ac00 0x100>;
+            reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+            clocks =        <&k2g_clks 0x2 0>,
+                            <&k2g_clks 0x2 1>;
+            clock-names = "fck", "vp1";
+            interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+            power-domains = <&k2g_pds 0x2>;
+
+            max-memory-bandwidth = <230000000>;
+
+            port {
+                    dpi_out: endpoint {
+                            remote-endpoint = <&sii9022_in>;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt
new file mode 100644
index 0000000000..e1ef295693
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt
@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/graph.txt,
+and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+	compatible = "ti,omap4-dss";
+	reg = <0x58000000 0x80>;
+	status = "disabled";
+	ti,hwmods = "dss_core";
+	clocks = <&dss_dss_clk>;
+	clock-names = "fck";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	dispc@58001000 {
+		compatible = "ti,omap4-dispc";
+		reg = <0x58001000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "dss_dispc";
+		clocks = <&dss_dss_clk>;
+		clock-names = "fck";
+	};
+
+	hdmi: encoder@58006000 {
+		compatible = "ti,omap4-hdmi";
+		reg = <0x58006000 0x200>,
+		      <0x58006200 0x100>,
+		      <0x58006300 0x100>,
+		      <0x58006400 0x1000>;
+		reg-names = "wp", "pll", "phy", "core";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+		ti,hwmods = "dss_hdmi";
+		clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+		clock-names = "fck", "sys_clk";
+	};
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt
new file mode 100644
index 0000000000..ee867c4d11
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt
@@ -0,0 +1,58 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt
new file mode 100644
index 0000000000..cd02516a40
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt
@@ -0,0 +1,87 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+	- Port 0: DPI output
+	- Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt
new file mode 100644
index 0000000000..0f85f6b3a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt
@@ -0,0 +1,119 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
new file mode 100644
index 0000000000..2086121864
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
@@ -0,0 +1,100 @@
+Texas Instruments OMAP5 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap5-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap5-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap5-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap5-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap5-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
new file mode 100644
index 0000000000..f96083c0bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- enable-gpios: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	compatible = "ti,opa362";
+	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			opa_in: endpoint@0 {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			opa_out: endpoint@0 {
+				remote-endpoint = <&tv_connector_in>;
+			};
+		};
+	};
+};
+
+
+
diff --git a/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt
new file mode 100644
index 0000000000..26e6d32e3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt
@@ -0,0 +1,44 @@
+TPD12S015 HDMI level shifter and ESD protection chip
+====================================================
+
+Required properties:
+- compatible: "ti,tpd12s015"
+
+Optional properties:
+- gpios: CT CP HPD, LS OE and HPD gpios
+
+Required nodes:
+- Video port 0 for HDMI input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+tpd12s015: encoder@1 {
+	compatible = "ti,tpd12s015";
+
+	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+		<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+		<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tpd12s015_in: endpoint@0 {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tpd12s015_out: endpoint@0 {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/tilcdc/panel.txt b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
new file mode 100644
index 0000000000..808216310e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
@@ -0,0 +1,66 @@
+Device-Tree bindings for tilcdc DRM generic panel output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,panel".
+ - panel-info: configuration info to configure LCDC correctly for the panel
+   - ac-bias: AC Bias Pin Frequency
+   - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
+   - dma-burst-sz: DMA burst size
+   - bpp: Bits per pixel
+   - fdd: FIFO DMA Request Delay
+   - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+   - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+   - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+   - fifo-th: DMA FIFO threshold
+ - display-timings: typical videomode of lcd panel.  Multiple video modes
+   can be listed if the panel supports multiple timings, but the 'native-mode'
+   should be the preferred/default resolution.  Refer to
+   Documentation/devicetree/bindings/display/panel/display-timing.txt for display
+   timing binding details.
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- enable-gpios: GPIO pin to enable or disable the panel
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+   muxing properly for pins that connect to TFP410 device
+
+Example:
+
+	/* Settings for CDTech_S035Q01 / LCD3 cape: */
+	lcd3 {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 19 0>;
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <21>;
+				hfront-porch    = <58>;
+				hsync-len       = <47>;
+				vback-porch     = <11>;
+				vfront-porch    = <23>;
+				vsync-len       = <2>;
+				clock-frequency = <8000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
new file mode 100644
index 0000000000..3b3d0bbfcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for tilcdc DRM driver
+
+Required properties:
+ - compatible: value should be one of the following:
+    - "ti,am33xx-tilcdc" for AM335x based boards
+    - "ti,da850-tilcdc" for DA850/AM18x/OMAP-L138 based boards
+ - interrupts: the interrupt number
+ - reg: base address and size of the LCDC device
+
+Recommended properties:
+ - ti,hwmods: Name of the hwmod associated to the LCDC
+
+Optional properties:
+ - max-bandwidth: The maximum pixels per second that the memory
+   interface / lcd controller combination can sustain
+ - max-width: The maximum horizontal pixel width supported by
+   the lcd controller.
+ - max-pixelclock: The maximum pixel clock that can be supported
+   by the lcd controller in KHz.
+ - blue-and-red-wiring: Recognized values "straight" or "crossed".
+   This property deals with the LCDC revision 2 (found on AM335x)
+   color errata [1].
+    - "straight" indicates normal wiring that supports RGB565,
+      BGR888, and XBGR8888 color formats.
+    - "crossed" indicates wiring that has blue and red wires
+      crossed. This setup supports BGR565, RGB888 and XRGB8888
+      formats.
+    - If the property is not present or its value is not recognized
+      the legacy mode is assumed. This configuration supports RGB565,
+      RGB888 and XRGB8888 formats. However, depending on wiring, the red
+      and blue colors are swapped in either 16 or 24-bit color modes.
+
+Optional nodes:
+
+ - port/ports: to describe a connection to an external encoder. The
+   binding follows Documentation/devicetree/bindings/graph.txt and
+   supports a single port with a single endpoint.
+
+ - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
+   Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting
+   tfp410 DVI encoder or lcd panel to lcdc
+
+[1] There is an errata about AM335x color wiring. For 16-bit color mode
+    the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
+    but for 24 bit color modes the wiring of blue and red components is
+    crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
+    for Blue[3-7]. For more details see section 3.1.1 in AM335x
+    Silicon Errata:
+    https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
+
+Example:
+
+	fb: fb@4830e000 {
+		compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc";
+		reg = <0x4830e000 0x1000>;
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+		ti,hwmods = "lcdc";
+
+		blue-and-red-wiring = "crossed";
+
+		port {
+			lcdc_0: endpoint {
+				remote-endpoint = <&hdmi_0>;
+			};
+		};
+	};
+
+	tda19988: tda19988 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		port {
+			hdmi_0: endpoint {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000000..f39c77ee36
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/truly,nt35597.txt
@@ -0,0 +1,59 @@
+Truly model NT35597 DSI display driver
+
+The Truly NT35597 is a generic display driver, currently only configured
+for use in the 2K display on the Qualcomm SDM845 MTP board.
+
+Required properties:
+- compatible: should be "truly,nt35597-2K-display"
+- vdda-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply voltage
+  for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply voltage
+  for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  (active low)
+- mode-gpios: phandle of the gpio for choosing the mode of the display
+  for single DSI or Dual DSI
+  This should be low for dual DSI and high for single DSI mode
+- ports: This device has two video ports driven by two DSIs. Their connections
+  are modeled using the OF graph bindings specified in
+  Documentation/devicetree/bindings/graph.txt.
+  - port@0: DSI input port driven by master DSI
+  - port@1: DSI input port driven by secondary DSI
+
+Example:
+
+	dsi@ae94000 {
+		panel@0 {
+			compatible = "truly,nt35597-2K-display";
+			reg = <0>;
+			vdda-supply = <&pm8998_l14>;
+			vdispp-supply = <&lab_regulator>;
+			vdispn-supply = <&ibb_regulator>;
+			pinctrl-names = "default", "suspend";
+			pinctrl-0 = <&dpu_dsi_active>;
+			pinctrl-1 = <&dpu_dsi_suspend>;
+
+			reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+			mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					panel0_in: endpoint {
+						remote-endpoint = <&dsi0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					panel1_in: endpoint {
+						remote-endpoint = <&dsi1_out>;
+					};
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/via,vt8500-fb.txt b/Documentation/devicetree/bindings/display/via,vt8500-fb.txt
new file mode 100644
index 0000000000..2871e218a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/via,vt8500-fb.txt
@@ -0,0 +1,36 @@
+VIA VT8500 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-fb"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
+
+Required subnodes:
+- display-timings: see display-timing.txt for information
+
+Example:
+
+	fb@d8050800 {
+		compatible = "via,vt8500-fb";
+		reg = <0xd800e400 0x400>;
+		interrupts = <12>;
+		bits-per-pixel = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <0>; /* unused but required */
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt
new file mode 100644
index 0000000000..a850fa011f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia Graphics Engine Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,prizm-ge-rops"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+	ge_rops@d8050400 {
+		compatible = "wm,prizm-ge-rops";
+		reg = <0xd8050400 0x100>;
+	};
diff --git a/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt
new file mode 100644
index 0000000000..0bcadb2840
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt
@@ -0,0 +1,33 @@
+Wondermedia WM8505 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,wm8505-fb"
+- reg : Should contain 1 register ranges(address and length)
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
+
+Required subnodes:
+- display-timings: see display-timing.txt for information
+
+Example:
+
+	fb@d8051700 {
+		compatible = "wm,wm8505-fb";
+		reg = <0xd8051700 0x200>;
+		bits-per-pixel = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 800x480 {
+				clock-frequency = <0>; /* unused but required */
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <40>;
+				hback-porch = <88>;
+				hsync-len = <0>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <1>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
new file mode 100644
index 0000000000..554f9d5809
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort Subsystem
+
+description: |
+  The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
+  implements the display and audio pipelines based on the DisplayPort v1.2
+  standard. The subsystem includes multiple functional blocks as below:
+
+               +------------------------------------------------------------+
+  +--------+   | +----------------+     +-----------+                       |
+  | DPDMA  | --->|                | --> |   Video   | Video +-------------+ |
+  | 4x vid |   | |                |     | Rendering | -+--> |             | |   +------+
+  | 2x aud |   | |  Audio/Video   | --> | Pipeline  |  |    | DisplayPort |---> | PHY0 |
+  +--------+   | | Buffer Manager |     +-----------+  |    |   Source    | |   +------+
+               | |    and STC     |     +-----------+  |    | Controller  | |   +------+
+  Live Video --->|                | --> |   Audio   | Audio |             |---> | PHY1 |
+               | |                |     |   Mixer   | --+-> |             | |   +------+
+  Live Audio --->|                | --> |           |  ||   +-------------+ |
+               | +----------------+     +-----------+  ||                   |
+               +---------------------------------------||-------------------+
+                                                       vv
+                                                 Blended Video and
+                                                 Mixed Audio to PL
+
+  The Buffer Manager interacts with external interface such as DMA engines or
+  live audio/video streams from the programmable logic. The Video Rendering
+  Pipeline blends the video and graphics layers and performs colorspace
+  conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
+  Source Controller handles the DisplayPort protocol and connects to external
+  PHYs.
+
+  The subsystem supports 2 video and 2 audio streams, and various pixel formats
+  and depths up to 4K@30 resolution.
+
+  Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
+  (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
+  for more details.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-dpsub-1.7
+
+  reg:
+    maxItems: 4
+  reg-names:
+    items:
+      - const: dp
+      - const: blend
+      - const: av_buf
+      - const: aud
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      The APB clock and at least one video clock are mandatory, the audio clock
+      is optional.
+    minItems: 2
+    items:
+      - description: dp_apb_clk is the APB clock
+      - description: dp_aud_clk is the Audio clock
+      - description:
+          dp_vtc_pixel_clk_in is the non-live video clock (from Processing
+          System)
+      - description:
+          dp_live_video_in_clk is the live video clock (from Programmable
+          Logic)
+  clock-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: dp_apb_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+      - minItems: 3
+        items:
+          - const: dp_apb_clk
+          - const: dp_aud_clk
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+          - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: Video layer, plane 0 (RGB or luma)
+      - description: Video layer, plane 1 (U/V or U)
+      - description: Video layer, plane 2 (V)
+      - description: Graphics layer
+  dma-names:
+    items:
+      - const: vid0
+      - const: vid1
+      - const: vid2
+      - const: gfx0
+
+  phys:
+    description: PHYs for the DP data lanes
+    minItems: 1
+    maxItems: 2
+  phy-names:
+    minItems: 1
+    items:
+      - const: dp-phy0
+      - const: dp-phy1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Connections to the programmable logic and the DisplayPort PHYs. Each port
+      shall have a single endpoint.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live video input from the programmable logic
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live graphics input from the programmable logic
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live audio input from the programmable logic
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The blended video output to the programmable logic
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The mixed audio output to the programmable logic
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The DisplayPort output
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - dmas
+  - dma-names
+  - phys
+  - phy-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+    display@fd4a0000 {
+        compatible = "xlnx,zynqmp-dpsub-1.7";
+        reg = <0xfd4a0000 0x1000>,
+              <0xfd4aa000 0x1000>,
+              <0xfd4ab000 0x1000>,
+              <0xfd4ac000 0x1000>;
+        reg-names = "dp", "blend", "av_buf", "aud";
+        interrupts = <0 119 4>;
+        interrupt-parent = <&gic>;
+
+        clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
+        clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
+
+        power-domains = <&pd_dp>;
+        resets = <&reset ZYNQMP_RESET_DP>;
+
+        dma-names = "vid0", "vid1", "vid2", "gfx0";
+        dmas = <&xlnx_dpdma 0>,
+               <&xlnx_dpdma 1>,
+               <&xlnx_dpdma 2>,
+               <&xlnx_dpdma 3>;
+
+        phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+               <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+        phy-names = "dp-phy0", "dp-phy1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+            };
+            port@1 {
+                reg = <1>;
+            };
+            port@2 {
+                reg = <2>;
+            };
+            port@3 {
+                reg = <3>;
+            };
+            port@4 {
+                reg = <4>;
+            };
+            port@5 {
+                reg = <5>;
+                dpsub_dp_out: endpoint {
+                    remote-endpoint = <&dp_connector>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
new file mode 100644
index 0000000000..76b804b7c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -0,0 +1,301 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xylon LogiCVC display controller
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The Xylon LogiCVC is a display controller that supports multiple layers.
+  It is usually implemented as programmable logic and was optimized for use
+  with Xilinx Zynq-7000 SoCs and Xilinx FPGAs.
+
+  Because the controller is intended for use in a FPGA, most of the
+  configuration of the controller takes place at logic configuration bitstream
+  synthesis time. As a result, many of the device-tree bindings are meant to
+  reflect the synthesis configuration and must not be configured differently.
+  Matching synthesis parameters are provided when applicable.
+
+  Layers are declared in the "layers" sub-node and have dedicated configuration.
+  In version 3 of the controller, each layer has fixed memory offset and address
+  starting from the video memory base address for its framebuffer. In version 4,
+  framebuffers are configured with a direct memory address instead.
+
+properties:
+  compatible:
+    enum:
+      - xylon,logicvc-3.02.a-display
+      - xylon,logicvc-4.01.a-display
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      # vclk is required and must be provided as first item.
+      - const: vclk
+      # Other clocks are optional and can be provided in any order.
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  xylon,display-interface:
+    enum:
+      # Parallel RGB interface (C_DISPLAY_INTERFACE == 0)
+      - parallel-rgb
+      # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1)
+      - bt656
+      # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2)
+      - lvds-4bits
+      # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4)
+      - lvds-3bits
+      # DVI interface (C_DISPLAY_INTERFACE == 5)
+      - dvi
+    description: Display output interface (C_DISPLAY_INTERFACE).
+
+  xylon,display-colorspace:
+    enum:
+      # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0)
+      - rgb
+      # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1)
+      - yuv422
+      # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2)
+      - yuv444
+    description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
+
+  xylon,display-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Display output depth (C_PIXEL_DATA_WIDTH).
+
+  xylon,row-stride:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
+
+  xylon,dithering:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Dithering module is enabled (C_XCOLOR)
+
+  xylon,background-layer:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      The last layer is used to display a black background (C_USE_BACKGROUND).
+      The layer must still be registered.
+
+  xylon,layers-configurable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Configuration of layers' size, position and offset is enabled
+      (C_USE_SIZE_POSITION).
+
+  layers:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^layer@[0-9]+$":
+        type: object
+
+        properties:
+          reg:
+            maxItems: 1
+
+          xylon,layer-depth:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Layer depth (C_LAYER_X_DATA_WIDTH).
+
+          xylon,layer-colorspace:
+            enum:
+              # RGB colorspace (C_LAYER_X_TYPE == 0)
+              - rgb
+              # YUV packed colorspace (C_LAYER_X_TYPE == 0)
+              - yuv
+            description: Layer colorspace (C_LAYER_X_TYPE).
+
+          xylon,layer-alpha-mode:
+            enum:
+              # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0)
+              - layer
+              # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1)
+              - pixel
+            description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
+
+          xylon,layer-base-offset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: |
+              Offset in number of lines (C_LAYER_X_OFFSET) starting from the
+              video RAM base (C_VMEM_BASEADDR), only for version 3.
+
+          xylon,layer-buffer-offset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: |
+              Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
+              layer base offset for the second buffer used in double-buffering.
+
+          xylon,layer-primary:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description: |
+              Layer should be registered as a primary plane (exactly one is
+              required).
+
+        additionalProperties: false
+
+        required:
+          - reg
+          - xylon,layer-depth
+          - xylon,layer-colorspace
+          - xylon,layer-alpha-mode
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - layer@0
+
+    additionalProperties: false
+
+    description: |
+      The description of the display controller layers, containing layer
+      sub-nodes that each describe a registered layer.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Video output port, typically connected to a panel or bridge.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - xylon,display-interface
+  - xylon,display-colorspace
+  - xylon,display-depth
+  - xylon,row-stride
+  - layers
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      logicvc_display: display@0 {
+        compatible = "xylon,logicvc-3.02.a-display";
+        reg = <0x0 0x6000>;
+
+        memory-region = <&logicvc_cma>;
+
+        clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>;
+        clock-names = "vclk", "lvdsclk";
+
+        interrupt-parent = <&intc>;
+        interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+        xylon,display-interface = "lvds-4bits";
+        xylon,display-colorspace = "rgb";
+        xylon,display-depth = <16>;
+        xylon,row-stride = <1024>;
+
+        xylon,layers-configurable;
+
+        layers {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          layer@0 {
+            reg = <0>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <0>;
+            xylon,layer-buffer-offset = <480>;
+            xylon,layer-primary;
+          };
+
+          layer@1 {
+            reg = <1>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <2400>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@2 {
+            reg = <2>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <960>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@3 {
+            reg = <3>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <480>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@4 {
+            reg = <4>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <8192>;
+            xylon,layer-buffer-offset = <480>;
+          };
+        };
+
+        port {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          logicvc_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
new file mode 100644
index 0000000000..cd17684aaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -0,0 +1,61 @@
+Analog Devices AXI-DMAC DMA controller
+
+Required properties:
+ - compatible: Must be "adi,axi-dmac-1.00.a".
+ - reg: Specification for the controllers memory mapped register map.
+ - interrupts: Specification for the controllers interrupt.
+ - clocks: Phandle and specifier to the controllers AXI interface clock
+ - #dma-cells: Must be 1.
+
+Required sub-nodes:
+ - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
+   the channel sub-nodes the following bindings apply. They must match the
+   configuration options of the peripheral as it was instantiated.
+
+Required properties for adi,channels sub-node:
+ - #size-cells: Must be 0
+ - #address-cells: Must be 1
+
+Required channel sub-node properties:
+ - reg: Which channel this node refers to.
+ - adi,source-bus-width,
+   adi,destination-bus-width: Width of the source or destination bus in bits.
+ - adi,source-bus-type,
+   adi,destination-bus-type: Type of the source or destination bus. Must be one
+   of the following:
+	0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
+	1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
+	2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
+
+Deprecated optional channel properties:
+ - adi,length-width: Width of the DMA transfer length register.
+ - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
+   transfers.
+ - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
+
+DMA clients connected to the AXI-DMAC DMA controller must use the format
+described in the dma.txt file using a one-cell specifier. The value of the
+specifier refers to the DMA channel index.
+
+Example:
+
+dma: dma@7c420000 {
+	compatible = "adi,axi-dmac-1.00.a";
+	reg = <0x7c420000 0x10000>;
+	interrupts = <0 57 0>;
+	clocks = <&clkc 16>;
+	#dma-cells = <1>;
+
+	adi,channels {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		dma-channel@0 {
+			reg = <0>;
+			adi,source-bus-width = <32>;
+			adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
+			adi,destination-bus-width = <64>;
+			adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
new file mode 100644
index 0000000000..02d5bd0354
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DMA Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 2
+    description:
+      The first cell is either 0 or 1, the former to use the normal
+      DMA, 1 for dedicated DMA. The second cell is the request line
+      number.
+
+  compatible:
+    const: allwinner,sun4i-a10-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun4i-a10-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <27>;
+        clocks = <&ahb_gates 6>;
+        #dma-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
new file mode 100644
index 0000000000..ec2d7a789f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 DMA Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: The cell is the request line number.
+
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a64-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
+      - items:
+          - const: allwinner,sun8i-r40-dma
+          - const: allwinner,sun50i-a64-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mbus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - dma-channels
+
+if:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun20i-d1-dma
+        - allwinner,sun50i-a100-dma
+        - allwinner,sun50i-h6-dma
+
+then:
+  properties:
+    clocks:
+      minItems: 2
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun50i-a64-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <0 50 4>;
+        clocks = <&ccu 30>;
+        dma-channels = <8>;
+        dma-requests = <27>;
+        resets = <&ccu 7>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
new file mode 100644
index 0000000000..5d554bcfab
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 DMA Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: The cell is the request line number.
+
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-dma
+      - allwinner,sun8i-a23-dma
+      - allwinner,sun8i-a83t-dma
+      - allwinner,sun8i-h3-dma
+      - allwinner,sun8i-v3s-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    dma: dma-controller@1c02000 {
+        compatible = "allwinner,sun6i-a31-dma";
+        reg = <0x01c02000 0x1000>;
+        interrupts = <0 50 4>;
+        clocks = <&ahb1_gates 6>;
+        resets = <&ahb1_rst 6>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
new file mode 100644
index 0000000000..391bf58386
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/altr,msgdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera mSGDMA IP core
+
+maintainers:
+  - Olivier Dautricourt <olivierdautricourt@gmail.com>
+
+description: |
+  Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA)
+  intellectual property (IP)
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: altr,socfpga-msgdma
+
+  reg:
+    items:
+      - description: Control and Status Register Slave Port
+      - description: Descriptor Slave Port
+      - description: Response Slave Port (Optional)
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: csr
+      - const: desc
+      - const: resp
+    minItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+    description:
+      The cell identifies the channel id (must be 0)
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    msgdma_controller: dma-controller@ff200b00 {
+        compatible = "altr,socfpga-msgdma";
+        reg = <0xff200b00 0x100>, <0xff200c00 0x100>, <0xff200d00 0x100>;
+        reg-names = "csr", "desc", "resp";
+        interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
new file mode 100644
index 0000000000..c53e0b0803
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
@@ -0,0 +1,47 @@
+Applied Micro X-Gene SoC DMA nodes
+
+DMA nodes are defined to describe on-chip DMA interfaces in
+APM X-Gene SoC.
+
+Required properties for DMA interfaces:
+- compatible: Should be "apm,xgene-dma".
+- device_type: set to "dma".
+- reg: Address and length of the register set for the device.
+  It contains the information of registers in the following order:
+  1st - DMA control and status register address space.
+  2nd - Descriptor ring control and status register address space.
+  3rd - Descriptor ring command register address space.
+  4th - Soc efuse register address space.
+- interrupts: DMA has 5 interrupts sources. 1st interrupt is
+  DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
+  are completion interrupts for each DMA channels.
+- clocks: Reference to the clock entry.
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+
+Example:
+	dmaclk: dmaclk@1f27c000 {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		reg = <0x0 0x1f27c000 0x0 0x1000>;
+		reg-names = "csr-reg";
+		clock-output-names = "dmaclk";
+	};
+
+	dma: dma@1f270000 {
+			compatible = "apm,xgene-storm-dma";
+			device_type = "dma";
+			reg = <0x0 0x1f270000 0x0 0x10000>,
+			      <0x0 0x1f200000 0x0 0x10000>,
+			      <0x0 0x1b000000 0x0 0x400000>,
+			      <0x0 0x1054a000 0x0 0x100>;
+			interrupts = <0x0 0x82 0x4>,
+				     <0x0 0xb8 0x4>,
+				     <0x0 0xb9 0x4>,
+				     <0x0 0xba 0x4>,
+				     <0x0 0xbb 0x4>;
+			dma-coherent;
+			clocks = <&dmaclk 0>;
+	};
diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
new file mode 100644
index 0000000000..ab193bc8bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apple,admac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Audio DMA Controller (ADMAC)
+
+description: |
+  Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio samples
+  on SoCs from the "Apple Silicon" family.
+
+  The controller has been seen with up to 24 channels. Even-numbered channels
+  are TX-only, odd-numbered are RX-only. Individual channels are coupled to
+  fixed device endpoints.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-admac
+          - apple,t8103-admac
+          - apple,t8112-admac
+      - const: apple,admac
+
+  reg:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      Clients specify a single cell with channel number.
+
+  dma-channels:
+    maximum: 24
+
+  interrupts:
+    minItems: 4
+    maxItems: 4
+    description:
+      Interrupts that correspond to the 4 IRQ outputs of the controller. Usually
+      only one of the controller outputs will be connected as an usable interrupt
+      source. The remaining interrupts will be left without a valid value, e.g.
+      in an interrupts-extended list the disconnected positions will contain
+      an empty phandle reference <0>.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#dma-cells'
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    aic: interrupt-controller {
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+
+    admac: dma-controller@238200000 {
+      compatible = "apple,t8103-admac", "apple,admac";
+      reg = <0x38200000 0x34000>;
+      dma-channels = <24>;
+      interrupts-extended = <0>,
+                            <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+                            <0>,
+                            <0>;
+      #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
new file mode 100644
index 0000000000..4a3dd6f530
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+  between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl330
+  required:
+    - compatible
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl330
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+    description: A single combined interrupt or an interrupt per event
+
+  '#dma-cells':
+    const: 1
+    description: Contains the DMA request number for the consumer
+
+  arm,pl330-broken-no-flushp:
+    type: boolean
+    description: quirk for avoiding to execute DMAFLUSHP
+
+  arm,pl330-periph-burst:
+    type: boolean
+    description: quirk for performing burst transfer only
+
+  dma-coherent: true
+
+  iommus:
+    minItems: 1
+    maxItems: 9
+    description: Up to 1 IOMMU entry per DMA channel for writes and 1
+      IOMMU entry for reads.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dma
+      - const: dma-ocp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@12680000 {
+        compatible = "arm,pl330", "arm,primecell";
+        reg = <0x12680000 0x1000>;
+        interrupts = <99>;
+        #dma-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
new file mode 100644
index 0000000000..ab25ae63d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm-pl08x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCells PL080 and PL081 and derivatives DMA controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: dma-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl080
+          - arm,pl081
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - arm,pl080
+              - arm,pl081
+          - const: arm,primecell
+      - items:
+          - const: faraday,ftdma020
+          - const: arm,pl080
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+    description: Address range of the PL08x registers
+
+  interrupts:
+    minItems: 1
+    description: The PL08x interrupt number
+
+  clocks:
+    minItems: 1
+    description: The clock running the IP core clock
+
+  clock-names:
+    maxItems: 1
+
+  lli-bus-interface-ahb1:
+    type: boolean
+    description: if AHB master 1 is eligible for fetching LLIs
+
+  lli-bus-interface-ahb2:
+    type: boolean
+    description: if AHB master 2 is eligible for fetching LLIs
+
+  mem-bus-interface-ahb1:
+    type: boolean
+    description: if AHB master 1 is eligible for fetching memory contents
+
+  mem-bus-interface-ahb2:
+    type: boolean
+    description: if AHB master 2 is eligible for fetching memory contents
+
+  memcpy-burst-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1
+      - 4
+      - 8
+      - 16
+      - 32
+      - 64
+      - 128
+      - 256
+    description: the size of the bursts for memcpy
+
+  memcpy-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 8
+      - 16
+      - 32
+      - 64
+    description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
+
+  resets:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dmac0: dma-controller@10130000 {
+      compatible = "arm,pl080", "arm,primecell";
+      reg = <0x10130000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <15>;
+      clocks = <&hclkdma0>;
+      clock-names = "apb_pclk";
+      lli-bus-interface-ahb1;
+      lli-bus-interface-ahb2;
+      mem-bus-interface-ahb2;
+      memcpy-burst-size = <256>;
+      memcpy-bus-width = <32>;
+      #dma-cells = <2>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    dma-controller@67000000 {
+      compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+      /* Faraday Technology FTDMAC020 variant */
+      arm,primecell-periphid = <0x0003b080>;
+      reg = <0x67000000 0x1000>;
+      interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+      resets = <&syscon GEMINI_RESET_DMAC>;
+      clocks = <&syscon GEMINI_CLK_AHB>;
+      clock-names = "apb_pclk";
+      /* Bus interface AHB1 (AHB0) is totally tilted */
+      lli-bus-interface-ahb2;
+      mem-bus-interface-ahb2;
+      memcpy-burst-size = <256>;
+      memcpy-bus-width = <32>;
+      #dma-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 0000000000..f69bcf5a63
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,42 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <2>, used to represent the number of integer cells in
+the dmas property of client devices.
+
+Example:
+
+dma0: dma@ffffec00 {
+	compatible = "atmel,at91sam9g45-dma";
+	reg = <0xffffec00 0x200>;
+	interrupts = <21>;
+	#dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel:
+a phandle plus two integer cells.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits).
+3. Parameters for the at91 DMA configuration register which are device
+dependent:
+  - bit 7-0: peripheral identifier for the hardware handshaking interface. The
+  identifier can be different for tx and rx.
+  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
+
+Example:
+
+i2c0@i2c@f8010000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8010000 0x100>;
+	interrupts = <9 4 6>;
+	dmas = <&dma0 1 7>,
+	       <&dma0 1 8>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
new file mode 100644
index 0000000000..76d649b3a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -0,0 +1,54 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
+  "microchip,sama7g5-dma" or
+  "microchip,sam9x7-dma", "atmel,sama5d4-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+  - The 1st cell specifies the channel configuration register:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+    - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+	compatible = "atmel,sama5d4-dma";
+	reg = <0xf0004000 0x200>;
+	interrupts = <50 4 0>;
+	#dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+  - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8024000 0x4000>;
+	interrupts = <34 4 6>;
+	dmas = <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		 | AT91_XDMAC_DT_PERID(6))>,
+	       <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		| AT91_XDMAC_DT_PERID(7))>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
new file mode 100644
index 0000000000..c9b9a54908
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 DMA controller
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+description:
+  The BCM2835 DMA controller has 16 channels in total. Only the lower
+  13 channels have an associated IRQ. Some arbitrary channels are used by the
+  VideoCore firmware (1,3,6,7 in the current firmware version). The channels
+  0, 2 and 3 have special functionality and should not be used by the driver.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2835-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain the DMA interrupts associated to the DMA channels in
+      ascending order.
+    minItems: 1
+    maxItems: 16
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 16
+
+  '#dma-cells':
+    description: The single cell represents the DREQ number.
+    const: 1
+
+  brcm,dma-channel-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask of available DMA channels in ascending order that are
+      not reserved by firmware and are available to the
+      kernel. i.e. first channel corresponds to LSB.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - brcm,dma-channel-mask
+
+examples:
+  - |
+    dma-controller@7e007000 {
+      compatible = "brcm,bcm2835-dma";
+      reg = <0x7e007000 0xf00>;
+      interrupts = <1 16>,
+                   <1 17>,
+                   <1 18>,
+                   <1 19>,
+                   <1 20>,
+                   <1 21>,
+                   <1 22>,
+                   <1 23>,
+                   <1 24>,
+                   <1 25>,
+                   <1 26>,
+                   /* dma channel 11-14 share one irq */
+                   <1 27>,
+                   <1 27>,
+                   <1 27>,
+                   <1 27>,
+                   /* unused shared irq for all channels */
+                   <1 28>;
+      interrupt-names = "dma0",
+                        "dma1",
+                        "dma2",
+                        "dma3",
+                        "dma4",
+                        "dma5",
+                        "dma6",
+                        "dma7",
+                        "dma8",
+                        "dma9",
+                        "dma10",
+                        "dma11",
+                        "dma12",
+                        "dma13",
+                        "dma14",
+                        "dma-shared-all";
+        #dma-cells = <1>;
+        brcm,dma-channel-mask = <0x7f35>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 0000000000..092913a284
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+	      "brcm,iproc-sba"
+	      "brcm,iproc-sba-v2"
+  The "brcm,iproc-sba" has support for only 6 PQ coefficients
+  The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+	...
+	#mbox-cells = <3>;
+	...
+};
+
+raid0 {
+	compatible = "brcm,iproc-sba-v2";
+	mboxes = <&raid_mbox 0 0x1 0xffff>,
+		 <&raid_mbox 1 0x1 0xffff>,
+		 <&raid_mbox 2 0x1 0xffff>,
+		 <&raid_mbox 3 0x1 0xffff>,
+		 <&raid_mbox 4 0x1 0xffff>,
+		 <&raid_mbox 5 0x1 0xffff>,
+		 <&raid_mbox 6 0x1 0xffff>,
+		 <&raid_mbox 7 0x1 0xffff>;
+};
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
new file mode 100644
index 0000000000..ea700f8ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Engine Common Properties
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  Generic binding to provide a way for a driver using DMA Engine to
+  retrieve the DMA request or channel information that goes from a
+  hardware device to a DMA controller.
+
+select: false
+
+properties:
+  "#dma-cells":
+    minimum: 1
+    # Should be enough
+    maximum: 255
+    description:
+      Used to provide DMA controller specific information.
+
+  dma-channel-mask:
+    description:
+      Bitmask of available DMA channels in ascending order that are
+      not reserved by firmware and are available to the
+      kernel. i.e. first channel corresponds to LSB.
+      The first item in the array is for channels 0-31, the second is for
+      channels 32-63, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      # Should be enough
+      maxItems: 255
+
+  dma-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of DMA channels supported by the controller.
+
+  dma-requests:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of DMA request signals supported by the controller.
+
+required:
+  - "#dma-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
new file mode 100644
index 0000000000..04d150d4d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Controller Common Properties
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: dma-common.yaml#
+
+# Everything else is described in the common file
+properties:
+  $nodename:
+    pattern: "^dma-controller(@.*)?$"
+
+additionalProperties: true
+
+examples:
+  - |
+    dma: dma-controller@48000000 {
+        compatible = "ti,omap-sdma";
+        reg = <0x48000000 0x1000>;
+        interrupts = <0 12 0x4>,
+                     <0 13 0x4>,
+                     <0 14 0x4>,
+                     <0 15 0x4>;
+        #dma-cells = <1>;
+        dma-channels = <32>;
+        dma-requests = <127>;
+        dma-channel-mask = <0xfffe>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
new file mode 100644
index 0000000000..346fe0fa44
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-router.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Router Common Properties
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: dma-common.yaml#
+
+description:
+  DMA routers are transparent IP blocks used to route DMA request
+  lines from devices to the DMA controller. Some SoCs (like TI DRA7x)
+  have more peripherals integrated with DMA requests than what the DMA
+  controller can handle directly.
+
+properties:
+  $nodename:
+    pattern: "^dma-router(@.*)?$"
+
+  dma-masters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Array of phandles to the DMA controllers the router can direct
+      the signal to.
+
+  dma-requests:
+    description:
+      Number of incoming request lines the router can handle.
+
+required:
+  - "#dma-cells"
+  - dma-masters
+
+additionalProperties: true
+
+examples:
+  - |
+    sdma_xbar: dma-router@4a002b78 {
+        compatible = "ti,dra7-dma-crossbar";
+        reg = <0x4a002b78 0xfc>;
+        #dma-cells = <1>;
+        dma-requests = <205>;
+        ti,dma-safe-map = <0>;
+        dma-masters = <&sdma>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt
new file mode 100644
index 0000000000..90a67a016a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma.txt
@@ -0,0 +1 @@
+This file has been moved to dma-controller.yaml.
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
new file mode 100644
index 0000000000..437db0c623
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale enhanced Direct Memory Access(eDMA) Controller
+
+description: |
+  The eDMA channels have multiplex capability by programmable
+  memory-mapped registers. channels are split into two groups, called
+  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
+  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-edma
+          - fsl,imx7ulp-edma
+          - fsl,imx8qm-adma
+          - fsl,imx8qm-edma
+          - fsl,imx93-edma3
+          - fsl,imx93-edma4
+      - items:
+          - const: fsl,ls1028a-edma
+          - const: fsl,vf610-edma
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 64
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 64
+
+  "#dma-cells":
+    enum:
+      - 2
+      - 3
+
+  dma-channels:
+    minItems: 1
+    maxItems: 64
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  big-endian:
+    description: |
+      If present registers and hardware scatter/gather descriptors of the
+      eDMA are implemented in big endian mode, otherwise in little mode.
+    type: boolean
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dma-channels
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-adma
+              - fsl,imx8qm-edma
+              - fsl,imx93-edma3
+              - fsl,imx93-edma4
+    then:
+      properties:
+        "#dma-cells":
+          const: 3
+        # It is not necessary to write the interrupt name for each channel.
+        # instead, you can simply maintain the sequential IRQ numbers as
+        # defined for the DMA channels.
+        interrupt-names: false
+        clock-names:
+          items:
+            - const: dma
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-edma
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          minItems: 2
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: edma-tx
+            - const: edma-err
+        reg:
+          minItems: 2
+          maxItems: 3
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7ulp-edma
+    then:
+      properties:
+        clock:
+          minItems: 2
+        clock-names:
+          items:
+            - const: dma
+            - const: dmamux0
+        interrupts:
+          minItems: 2
+          maxItems: 17
+        reg:
+          minItems: 2
+          maxItems: 2
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    edma0: dma-controller@40018000 {
+      #dma-cells = <2>;
+      compatible = "fsl,vf610-edma";
+      reg = <0x40018000 0x2000>,
+            <0x40024000 0x1000>,
+            <0x40025000 0x1000>;
+      interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "edma-tx", "edma-err";
+      dma-channels = <32>;
+      clock-names = "dmamux0", "dmamux1";
+      clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    edma1: dma-controller@40080000 {
+      #dma-cells = <2>;
+      compatible = "fsl,imx7ulp-edma";
+      reg = <0x40080000 0x2000>,
+            <0x40210000 0x1000>;
+      dma-channels = <32>;
+      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                   /* last is eDMA2-ERR interrupt */
+                   <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+       clock-names = "dma", "dmamux0";
+       clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    dma-controller@44000000 {
+      compatible = "fsl,imx93-edma3";
+      reg = <0x44000000 0x200000>;
+      #dma-cells = <3>;
+      dma-channels = <31>;
+      interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+        clock-names = "dma";
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
new file mode 100644
index 0000000000..b95dd8db5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-sdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+maintainers:
+  - Joy Zou <joy.zou@nxp.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx50-sdma
+              - fsl,imx51-sdma
+              - fsl,imx53-sdma
+              - fsl,imx6q-sdma
+              - fsl,imx7d-sdma
+          - const: fsl,imx35-sdma
+      - items:
+          - enum:
+              - fsl,imx6sx-sdma
+              - fsl,imx6sl-sdma
+          - const: fsl,imx6q-sdma
+      - items:
+          - const: fsl,imx6ul-sdma
+          - const: fsl,imx6q-sdma
+          - const: fsl,imx35-sdma
+      - items:
+          - const: fsl,imx6sll-sdma
+          - const: fsl,imx6ul-sdma
+      - items:
+          - const: fsl,imx8mq-sdma
+          - const: fsl,imx7d-sdma
+      - items:
+          - enum:
+              - fsl,imx8mp-sdma
+              - fsl,imx8mn-sdma
+              - fsl,imx8mm-sdma
+          - const: fsl,imx8mq-sdma
+      - items:
+          - enum:
+              - fsl,imx25-sdma
+              - fsl,imx31-sdma
+              - fsl,imx35-sdma
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,sdma-ram-script-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Should contain the full path of SDMA RAM scripts firmware.
+
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell: request/event ID
+
+      The second cell: peripheral types ID
+        enum:
+          - MCU domain SSI: 0
+          - Shared SSI: 1
+          - MMC: 2
+          - SDHC: 3
+          - MCU domain UART: 4
+          - Shared UART: 5
+          - FIRI: 6
+          - MCU domain CSPI: 7
+          - Shared CSPI: 8
+          - SIM: 9
+          - ATA: 10
+          - CCM: 11
+          - External peripheral: 12
+          - Memory Stick Host Controller: 13
+          - Shared Memory Stick Host Controller: 14
+          - DSP: 15
+          - Memory: 16
+          - FIFO type Memory: 17
+          - SPDIF: 18
+          - IPU Memory: 19
+          - ASRC: 20
+          - ESAI: 21
+          - SSI Dual FIFO: 22
+              description: needs firmware more than ver 2
+          - Shared ASRC: 23
+          - SAI: 24
+          - HDMI Audio: 25
+
+       The third cell: transfer priority ID
+         enum:
+           - High: 0
+           - Medium: 1
+           - Low: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  fsl,sdma-event-remap:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 2
+    items:
+      items:
+        - description: GPR register offset
+        - description: GPR register shift
+        - description: GPR register value
+    description: |
+      Register bits of sdma event remap, the format is <reg shift val>.
+      The order is <RX>, <TX>.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the On-chip RAM (OCRAM) node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,sdma-ram-script-name
+
+additionalProperties: false
+
+examples:
+  - |
+    sdma: dma-controller@83fb0000 {
+      compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+      reg = <0x83fb0000 0x4000>;
+      interrupts = <6>;
+      #dma-cells = <3>;
+      fsl,sdma-ram-script-name = "sdma-imx51.bin";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml
new file mode 100644
index 0000000000..add9c77e8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Direct Memory Access (DMA) Controller from i.MX23/i.MX28
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-dma-apbh
+              - fsl,imx6sx-dma-apbh
+              - fsl,imx7d-dma-apbh
+          - const: fsl,imx28-dma-apbh
+      - enum:
+          - fsl,imx23-dma-apbh
+          - fsl,imx23-dma-apbx
+          - fsl,imx28-dma-apbh
+          - fsl,imx28-dma-apbx
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 16
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    enum: [4, 8, 16]
+
+required:
+  - compatible
+  - reg
+  - "#dma-cells"
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-parent = <&irqc>;
+
+    dma-controller@80004000 {
+      compatible = "fsl,imx28-dma-apbh";
+      reg = <0x80004000 0x2000>;
+      interrupts = <82 83 84 85
+                    88 88 88 88
+                    88 88 88 88
+                    87 86 0 0>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
+
+    dma-controller@80024000 {
+      compatible = "fsl,imx28-dma-apbx";
+      reg = <0x80024000 0x2000>;
+      interrupts = <78 79 66 0
+                    80 81 68 69
+                    70 71 72 73
+                    74 75 76 77>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
new file mode 100644
index 0000000000..1c9929d537
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -0,0 +1,50 @@
+* Freescale Direct Memory Access (DMA) Controller for i.MX
+
+This document will only describe differences to the generic DMA Controller and
+DMA request bindings as described in dma/dma.txt .
+
+* DMA controller
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
+- reg : Should contain DMA registers location and length
+- interrupts : First item should be DMA interrupt, second one is optional and
+    should contain DMA Error interrupt
+- #dma-cells : Has to be 1. imx-dma does not support anything else.
+
+Optional properties:
+- dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-channels : deprecated
+- dma-requests : Number of DMA requests supported.
+- #dma-requests : deprecated
+
+Example:
+
+	dma: dma@10001000 {
+		compatible = "fsl,imx27-dma";
+		reg = <0x10001000 0x1000>;
+		interrupts = <32 33>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+	};
+
+
+* DMA client
+
+Clients have to specify the DMA requests with phandles in a list.
+
+Required properties:
+- dmas: List of one or more DMA request specifiers. One DMA request specifier
+    consists of a phandle to the DMA controller followed by the integer
+    specifying the request line.
+- dma-names: List of string identifiers for the DMA requests. For the correct
+    names, have a look at the specific client driver.
+
+Example:
+
+	sdhci1: sdhci@10013000 {
+		...
+		dmas = <&dma 7>;
+		dma-names = "rx-tx";
+		...
+	};
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
new file mode 100644
index 0000000000..da371c4d40
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -0,0 +1,58 @@
+NXP Layerscape SoC qDMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible:		Must be one of
+			 "fsl,ls1021a-qdma": for LS1021A Board
+			 "fsl,ls1028a-qdma": for LS1028A Board
+			 "fsl,ls1043a-qdma": for ls1043A Board
+			 "fsl,ls1046a-qdma": for ls1046A Board
+- reg:			Should contain the register's base address and length.
+- interrupts:		Should contain a reference to the interrupt used by this
+			device.
+- interrupt-names:	Should contain interrupt names:
+			 "qdma-queue0": the block0 interrupt
+			 "qdma-queue1": the block1 interrupt
+			 "qdma-queue2": the block2 interrupt
+			 "qdma-queue3": the block3 interrupt
+			 "qdma-error":  the error interrupt
+- fsl,dma-queues:	Should contain number of queues supported.
+- dma-channels:	Number of DMA channels supported
+- block-number:	the virtual block number
+- block-offset:	the offset of different virtual block
+- status-sizes:	status queue size of per virtual block
+- queue-sizes:		command queue size of per virtual block, the size number
+			based on queues
+
+Optional properties:
+
+- dma-channels:		Number of DMA channels supported by the controller.
+- big-endian:		If present registers and hardware scatter/gather descriptors
+			of the qDMA are implemented in big endian mode, otherwise in little
+			mode.
+
+Examples:
+
+	qdma: dma-controller@8390000 {
+			compatible = "fsl,ls1021a-qdma";
+			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error",
+				"qdma-queue0", "qdma-queue1";
+			dma-channels = <8>;
+			block-number = <2>;
+			block-offset = <0x1000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644
index 0000000000..28c1341db3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+  node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+  The maximum burst size is this value multiplied by the hardware-reported bus
+  width.
+- #dma-cells: Must be 3:
+  - The first cell is the peripheral's DMA request line.
+  - The second cell is a bitmap specifying to which channels the DMA request
+    line may be mapped (i.e. bit N set indicates channel N is usable).
+  - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32.  If not specified
+  the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+	compatible = "img,pistachio-mdc-dma";
+	reg = <0x18143000 0x1000>;
+	interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&system_clk>;
+	clock-names = "sys";
+
+	img,max-burst-multiplier = <16>;
+	img,cr-periph = <&cr_periph>;
+
+	#dma-cells = <3>;
+};
+
+spi@18100f00 {
+	...
+	dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+	dma-names = "tx", "rx";
+	...
+};
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
new file mode 100644
index 0000000000..d9cca3006e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs DMA Controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-dma
+          - ingenic,jz4725b-dma
+          - ingenic,jz4755-dma
+          - ingenic,jz4760-dma
+          - ingenic,jz4760-bdma
+          - ingenic,jz4760-mdma
+          - ingenic,jz4760b-dma
+          - ingenic,jz4760b-bdma
+          - ingenic,jz4760b-mdma
+          - ingenic,jz4770-dma
+          - ingenic,jz4780-dma
+          - ingenic,x1000-dma
+          - ingenic,x1830-dma
+      - items:
+          - const: ingenic,jz4770-bdma
+          - const: ingenic,jz4760b-bdma
+
+  reg:
+    items:
+      - description: Channel-specific registers
+      - description: System control registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#dma-cells":
+    enum: [2, 3]
+    description: >
+      DMA clients must use the format described in dma.txt, giving a phandle
+      to the DMA controller plus the following integer cells:
+
+      - Request type: The DMA request type specifies the device endpoint that
+        will be the source or destination of the DMA transfer.
+        If "#dma-cells" is 2, the request type is a single cell, and the
+        direction will be unidirectional (either RX or TX but not both).
+        If "#dma-cells" is 3, the request type has two cells; the first
+        one corresponds to the host to device direction (TX), the second one
+        corresponds to the device to host direction (RX). The DMA channel is
+        then bidirectional.
+
+      - Channel: If set to 0xffffffff, any available channel will be allocated
+        for the client. Otherwise, the exact channel specified will be used.
+        The channel should be reserved on the DMA controller using the
+        ingenic,reserved-channels property.
+
+  ingenic,reserved-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Bitmask of channels to reserve for devices that need a specific
+      channel. These channels will only be assigned when explicitly
+      requested by a client. The primary use for this is channels 0 and
+      1, which can be configured to have special behaviour for NAND/BCH
+      when using programmable firmware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    dma: dma-controller@13420000 {
+      compatible = "ingenic,jz4780-dma";
+      reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <10>;
+
+      clocks = <&cgu JZ4780_CLK_PDMA>;
+
+      #dma-cells = <2>;
+
+      ingenic,reserved-channels = <0x3>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
new file mode 100644
index 0000000000..d6bb553a2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized DMA controllers.
+
+maintainers:
+  - chuanhua.lei@intel.com
+  - mallikarjunax.reddy@intel.com
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - intel,lgm-cdma
+      - intel,lgm-dma2tx
+      - intel,lgm-dma1rx
+      - intel,lgm-dma1tx
+      - intel,lgm-dma0tx
+      - intel,lgm-dma3
+      - intel,lgm-toe-dma30
+      - intel,lgm-toe-dma31
+
+  reg:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description:
+      The first cell is the peripheral's DMA request line.
+      The second cell is the peripheral's (port) number corresponding to the channel.
+      The third cell is the burst length of the channel.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+  dma-channel-mask:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ctrl
+
+  interrupts:
+    maxItems: 1
+
+  intel,dma-poll-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DMA descriptor polling counter is used to control the poling mechanism
+      for the descriptor fetching for all channels.
+
+  intel,dma-byte-en:
+    type: boolean
+    description:
+      DMA byte enable is only valid for DMA write(RX).
+      Byte enable(1) means DMA write will be based on the number of dwords
+      instead of the whole burst.
+
+  intel,dma-drb:
+    type: boolean
+    description:
+      DMA descriptor read back to make sure data and desc synchronization.
+
+  intel,dma-dburst-wr:
+    type: boolean
+    description:
+      Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
+      if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
+      It only applies to RX DMA and memcopy DMA.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma0: dma-controller@e0e00000 {
+      compatible = "intel,lgm-cdma";
+      reg = <0xe0e00000 0x1000>;
+      #dma-cells = <3>;
+      dma-channels = <16>;
+      dma-channel-mask = <0xFFFF>;
+      interrupt-parent = <&ioapic1>;
+      interrupts = <82 1>;
+      resets = <&rcu0 0x30 0>;
+      reset-names = "ctrl";
+      clocks = <&cgu0 80>;
+      intel,dma-poll-cnt = <4>;
+      intel,dma-byte-en;
+      intel,dma-drb;
+    };
+  - |
+    dma3: dma-controller@ec800000 {
+      compatible = "intel,lgm-dma3";
+      reg = <0xec800000 0x1000>;
+      clocks = <&cgu0 71>;
+      resets = <&rcu0 0x10 9>;
+      #dma-cells = <3>;
+      intel,dma-poll-cnt = <16>;
+      intel,dma-byte-en;
+      intel,dma-dburst-wr;
+    };
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
new file mode 100644
index 0000000000..10a2f15b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -0,0 +1,47 @@
+* Hisilicon K3 DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Must be one of
+-              "hisilicon,k3-dma-1.0"
+-              "hisilicon,hisi-pcm-asp-dma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+		have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+		dma0: dma@fcd02000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0xfcd02000 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <27>;
+			interrupts = <0 12 4>;
+			clocks = <&pclk>;
+		};
+
+Client:
+Use specific request line passing from dmax
+For example, i2c0 read channel request line is 18, while write channel use 19
+
+		i2c0: i2c@fcb08000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 18          /* read channel */
+				 &dma0 19>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+
+		i2c1: i2c@fcb09000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 20          /* read channel */
+				 &dma0 21>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+
diff --git a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
new file mode 100644
index 0000000000..87740adb29
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
@@ -0,0 +1,54 @@
+NXP LPC18xx/43xx DMA MUX (DMA request router)
+
+Required properties:
+- compatible:	"nxp,lpc1850-dmamux"
+- reg:		Memory map for accessing module
+- #dma-cells:	Should be set to <3>.
+		* 1st cell contain the master dma request signal
+		* 2nd cell contain the mux value (0-3) for the peripheral
+		* 3rd cell contain either 1 or 2 depending on the AHB
+		  master used.
+- dma-requests:	Number of DMA requests for the mux
+- dma-masters:	phandle pointing to the DMA controller
+
+The DMA controller node need to have the following poroperties:
+- dma-requests:	Number of DMA requests the controller can handle
+
+Example:
+
+dmac: dma@40002000 {
+	compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
+	arm,primecell-periphid = <0x00041080>;
+	reg = <0x40002000 0x1000>;
+	interrupts = <2>;
+	clocks = <&ccu1 CLK_CPU_DMA>;
+	clock-names = "apb_pclk";
+	#dma-cells = <2>;
+	dma-channels = <8>;
+	dma-requests = <16>;
+	lli-bus-interface-ahb1;
+	lli-bus-interface-ahb2;
+	mem-bus-interface-ahb1;
+	mem-bus-interface-ahb2;
+	memcpy-burst-size = <256>;
+	memcpy-bus-width = <32>;
+};
+
+dmamux: dma-mux {
+	compatible = "nxp,lpc1850-dmamux";
+	#dma-cells = <3>;
+	dma-requests = <64>;
+	dma-masters = <&dmac>;
+};
+
+uart0: serial@40081000 {
+	compatible = "nxp,lpc1850-uart", "ns16550a";
+	reg = <0x40081000 0x1000>;
+	reg-shift = <2>;
+	interrupts = <24>;
+	clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+	clock-names = "uartclk", "reg";
+	dmas = <&dmamux 1 1 2
+		&dmamux 2 1 2>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 0000000000..dab468a889
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+  - Long Cheng <long.cheng@mediatek.com>
+
+description: |
+  The MediaTek UART APDMA controller provides DMA capabilities
+  for the UART peripheral bus.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-uart-dma
+              - mediatek,mt6795-uart-dma
+              - mediatek,mt8365-uart-dma
+              - mediatek,mt8516-uart-dma
+          - const: mediatek,mt6577-uart-dma
+      - enum:
+          - mediatek,mt6577-uart-dma
+
+  reg:
+    minItems: 1
+    maxItems: 16
+
+  interrupts:
+    description: |
+      TX, RX interrupt lines for each UART APDMA channel
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    description: Must contain one entry for the APDMA main clock
+    maxItems: 1
+
+  clock-names:
+    const: apdma
+
+  "#dma-cells":
+    const: 1
+    description: |
+      The first cell specifies the UART APDMA channel number
+
+  dma-requests:
+    description: |
+      Number of virtual channels of the UART APDMA controller
+    maximum: 16
+
+  mediatek,dma-33bits:
+    type: boolean
+    description: Enable 33-bits UART APDMA support
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  not:
+    required:
+      - dma-requests
+then:
+  properties:
+    interrupts:
+      maxItems: 8
+    reg:
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt2712-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        apdma: dma-controller@11000400 {
+            compatible = "mediatek,mt2712-uart-dma",
+                         "mediatek,mt6577-uart-dma";
+            reg = <0 0x11000400 0 0x80>,
+                  <0 0x11000480 0 0x80>,
+                  <0 0x11000500 0 0x80>,
+                  <0 0x11000580 0 0x80>,
+                  <0 0x11000600 0 0x80>,
+                  <0 0x11000680 0 0x80>,
+                  <0 0x11000700 0 0x80>,
+                  <0 0x11000780 0 0x80>,
+                  <0 0x11000800 0 0x80>,
+                  <0 0x11000880 0 0x80>,
+                  <0 0x11000900 0 0x80>,
+                  <0 0x11000980 0 0x80>;
+            interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+            dma-requests = <12>;
+            clocks = <&pericfg CLK_PERI_AP_DMA>;
+            clock-names = "apdma";
+            mediatek,dma-33bits;
+            #dma-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
new file mode 100644
index 0000000000..1f0875bd5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
@@ -0,0 +1,32 @@
+* Milbeaut AHB DMA Controller
+
+Milbeaut AHB DMA controller has transfer capability below.
+ - device to memory transfer
+ - memory to device transfer
+
+Required property:
+- compatible:       Should be  "socionext,milbeaut-m10v-hdmac"
+- reg:              Should contain DMA registers location and length.
+- interrupts:       Should contain all of the per-channel DMA interrupts.
+                     Number of channels is configurable - 2, 4 or 8, so
+                     the number of interrupts specified should be {2,4,8}.
+- #dma-cells:       Should be 1. Specify the ID of the slave.
+- clocks:           Phandle to the clock used by the HDMAC module.
+
+
+Example:
+
+	hdmac1: dma-controller@1e110000 {
+		compatible = "socionext,milbeaut-m10v-hdmac";
+		reg = <0x1e110000 0x10000>;
+		interrupts = <0 132 4>,
+			     <0 133 4>,
+			     <0 134 4>,
+			     <0 135 4>,
+			     <0 136 4>,
+			     <0 137 4>,
+			     <0 138 4>,
+			     <0 139 4>;
+		#dma-cells = <1>;
+		clocks = <&dummy_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
new file mode 100644
index 0000000000..3057918040
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
@@ -0,0 +1,24 @@
+* Milbeaut AXI DMA Controller
+
+Milbeaut AXI DMA controller has only memory to memory transfer capability.
+
+* DMA controller
+
+Required property:
+- compatible: 	Should be  "socionext,milbeaut-m10v-xdmac"
+- reg:		Should contain DMA registers location and length.
+- interrupts: 	Should contain all of the per-channel DMA interrupts.
+                Number of channels is configurable - 2, 4 or 8, so
+                the number of interrupts specified should be {2,4,8}.
+- #dma-cells: 	Should be 1.
+
+Example:
+	xdmac0: dma-controller@1c250000 {
+		compatible = "socionext,milbeaut-m10v-xdmac";
+		reg = <0x1c250000 0x1000>;
+		interrupts = <0 17 0x4>,
+			     <0 18 0x4>,
+			     <0 19 0x4>,
+			     <0 20 0x4>;
+		#dma-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
new file mode 100644
index 0000000000..ec18bf0a80
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -0,0 +1,81 @@
+* MARVELL MMP DMA controller
+
+Marvell Peripheral DMA Controller
+Used platforms: pxa688, pxa910, pxa3xx, etc
+
+Required properties:
+- compatible: Should be "marvell,pdma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+		or one irq for pdma device
+
+Optional properties:
+- dma-channels: Number of DMA channels supported by the controller (defaults
+  to 32 when not specified)
+- #dma-channels: deprecated
+- dma-requests: Number of DMA requestor lines supported by the controller
+  (defaults to 32 when not specified)
+- #dma-requests: deprecated
+
+"marvell,pdma-1.0"
+Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
+
+Examples:
+
+/*
+ * Each channel has specific irq
+ * ICU parse out irq channel from ICU register,
+ * while DMA controller may not able to distinguish the irq channel
+ * Using this method, interrupt-parent is required as demuxer
+ * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
+ * 18~21 is ADMA irq
+ */
+pdma: dma-controller@d4000000 {
+	      compatible = "marvell,pdma-1.0";
+	      reg = <0xd4000000 0x10000>;
+	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+	      interrupt-parent = <&intcmux32>;
+	      dma-channels = <16>;
+      };
+
+/*
+ * One irq for all channels
+ * Dmaengine driver (DMA controller) distinguish irq channel via
+ * parsing internal register
+ */
+pdma: dma-controller@d4000000 {
+	      compatible = "marvell,pdma-1.0";
+	      reg = <0xd4000000 0x10000>;
+	      interrupts = <47>;
+	      dma-channels = <16>;
+      };
+
+
+Marvell Two Channel DMA Controller used specifically for audio
+Used platforms: pxa688, pxa910
+
+Required properties:
+- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+		or one irq for dma device
+
+"marvell,adma-1.0" used on pxa688
+"marvell,pxa910-squ" used on pxa910
+
+Examples:
+
+/* each channel has specific irq */
+adma0: dma-controller@d42a0800 {
+	      compatible = "marvell,adma-1.0";
+	      reg = <0xd42a0800 0x100>;
+	      interrupts = <18 19>;
+	      interrupt-parent = <&intcmux32>;
+      };
+
+/* One irq for all channels */
+squ: dma-controller@d42a0800 {
+	      compatible = "marvell,pxa910-squ";
+	      reg = <0xd42a0800 0x100>;
+	      interrupts = <46>;
+      };
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
new file mode 100644
index 0000000000..7e14e26676
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -0,0 +1,45 @@
+MOXA ART DMA Controller
+
+See dma.txt first
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-dma"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain an interrupt-specifier for the sole
+		interrupt generated by the device
+- #dma-cells :	Should be 1, a single cell holding a line request number
+
+Example:
+
+	dma: dma@90500000 {
+		compatible = "moxa,moxart-dma";
+		reg = <0x90500080 0x40>;
+		interrupts = <24 0>;
+		#dma-cells = <1>;
+	};
+
+
+Clients:
+
+DMA clients connected to the MOXA ART DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel:
+a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. Peripheral identifier for the hardware handshaking interface.
+
+Example:
+Use specific request line passing from dma
+For example, MMC request line is 5
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
new file mode 100644
index 0000000000..a6511df165
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+	is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+	Each channel of this DMA controller has a peripheral request line,
+	the assignment is fixed in hardware. This one cell
+	in dmas property of a client device represents the channel number.
+
+Example:
+
+	dma0: dma@14000 {
+		compatible = "fsl,mpc5121-dma";
+		reg = <0x14000 0x1800>;
+		interrupts = <65 0x8>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
new file mode 100644
index 0000000000..4bb317359d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
@@ -0,0 +1,33 @@
+MediaTek High-Speed DMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible:	Must be one of
+		  "mediatek,mt7622-hsdma": for MT7622 SoC
+		  "mediatek,mt7623-hsdma": for MT7623 SoC
+- reg:		Should contain the register's base address and length.
+- interrupts:	Should contain a reference to the interrupt used by this
+		device.
+- clocks:	Should be the clock specifiers corresponding to the entry in
+		clock-names property.
+- clock-names:	Should contain "hsdma" entries.
+- power-domains: Phandle to the power domain that the device is part of
+- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
+		in dmas property of a client device represents the channel
+		number.
+Example:
+
+        hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7623-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
new file mode 100644
index 0000000000..9c38bbe7e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
@@ -0,0 +1,28 @@
+* Marvell XOR v2 engines
+
+Required properties:
+- compatible: one of the following values:
+    "marvell,armada-7k-xor"
+    "marvell,xor-v2"
+- reg: Should contain registers location and length (two sets)
+    the first set is the DMA registers
+    the second set is the global registers
+- msi-parent: Phandle to the MSI-capable interrupt controller used for
+  interrupts.
+
+Optional properties:
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+   name must be "core" for the first clock and "reg" for the second
+   one
+
+
+Example:
+
+	xor0@400000 {
+		compatible = "marvell,xor-v2";
+		reg = <0x400000 0x1000>,
+		      <0x410000 0x1000>;
+		msi-parent = <&gic_v2m0>;
+		dma-coherent;
+	};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
new file mode 100644
index 0000000000..0ffb4d8766
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -0,0 +1,40 @@
+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be one of the following:
+  - "marvell,orion-xor"
+  - "marvell,armada-380-xor"
+  - "marvell,armada-3700-xor".
+- reg: Should contain registers location and length (two sets)
+    the first set is the low registers, the second set the high
+    registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+The sub-nodes used to contain one or several of the following
+properties, but they are now deprecated:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+- dmacap,interrupt to indicate that the XOR channel is capable of
+  generating interrupts
+
+Example:
+
+xor@d0060900 {
+	compatible = "marvell,orion-xor";
+	reg = <0xd0060900 0x100
+	       0xd0060b00 0x100>;
+	clocks = <&coreclk 0>;
+
+	xor00 {
+	      interrupts = <51>;
+	};
+	xor01 {
+	      interrupts = <52>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
new file mode 100644
index 0000000000..a790e56878
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPC DMA Controller
+
+description: |
+  The Tegra General Purpose Central (GPC) DMA controller is used for faster
+  data transfers between memory to memory, memory to device and device to
+  memory.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Rajesh Gumasta <rgumasta@nvidia.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-gpcdma
+      - items:
+          - enum:
+              - nvidia,tegra234-gpcdma
+              - nvidia,tegra194-gpcdma
+          - const: nvidia,tegra186-gpcdma
+
+  "#dma-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: gpcdma
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  dma-channel-mask:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - "#dma-cells"
+  - iommus
+  - dma-channel-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dma-controller@2600000 {
+        compatible = "nvidia,tegra186-gpcdma";
+        reg = <0x2600000 0x210000>;
+        resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+        reset-names = "gpcdma";
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+        dma-coherent;
+        dma-channel-mask = <0xfffffffe>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
new file mode 100644
index 0000000000..447fb44e7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
@@ -0,0 +1,44 @@
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This should include
+  all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+  client nodes' dmas properties. The specifier represents the DMA request
+  select value for the peripheral. For more details, consult the Tegra TRM's
+  documentation of the APB DMA channel control register REQ_SEL field.
+
+Examples:
+
+apbdma: dma@6000a000 {
+	compatible = "nvidia,tegra20-apbdma";
+	reg = <0x6000a000 0x1200>;
+	interrupts = < 0 136 0x04
+		       0 137 0x04
+		       0 138 0x04
+		       0 139 0x04
+		       0 140 0x04
+		       0 141 0x04
+		       0 142 0x04
+		       0 143 0x04
+		       0 144 0x04
+		       0 145 0x04
+		       0 146 0x04
+		       0 147 0x04
+		       0 148 0x04
+		       0 149 0x04
+		       0 150 0x04
+		       0 151 0x04 >;
+	clocks = <&tegra_car 34>;
+	resets = <&tegra_car 34>;
+	reset-names = "dma";
+	#dma-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
new file mode 100644
index 0000000000..4003dbe949
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra210-adma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Audio DMA (ADMA) controller
+
+description: |
+  The Tegra Audio DMA controller is used for transferring data
+  between system memory and the Audio Processing Engine (APE).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra210-adma
+          - nvidia,tegra186-adma
+      - items:
+          - enum:
+              - nvidia,tegra234-adma
+              - nvidia,tegra194-adma
+          - const: nvidia,tegra186-adma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  clocks:
+    description: Must contain one entry for the ADMA module clock
+    maxItems: 1
+
+  clock-names:
+    const: d_audio
+
+  "#dma-cells":
+    description: |
+      The first cell denotes the receive/transmit request number and
+      should be between 1 and the maximum number of requests supported.
+      This value corresponds to the RX/TX_REQUEST_SELECT fields in the
+      ADMA_CHn_CTRL register.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    dma-controller@702e2000 {
+        compatible = "nvidia,tegra210-adma";
+        reg = <0x702e2000 0x2000>;
+        interrupt-parent = <&tegra_agic>;
+        interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        clock-names = "d_audio";
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
new file mode 100644
index 0000000000..ec8b3dc37c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs DMA controller
+
+description: |
+  The OWL DMA is a general-purpose direct memory access controller capable of
+  supporting 10 independent DMA channels for the Actions Semi S700 SoC and 12
+  independent DMA channels for the S500 and S900 SoC variants.
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-dma
+      - actions,s700-dma
+      - actions,s900-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      controller supports 4 interrupts, which are freely assignable to the
+      DMA channels.
+    maxItems: 4
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    maximum: 12
+
+  dma-requests:
+    maximum: 46
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle and Specifier of the clock feeding the DMA controller.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+  - dma-requests
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    dma: dma-controller@e0260000 {
+        compatible = "actions,s900-dma";
+        reg = <0xe0260000 0x1000>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        dma-channels = <12>;
+        dma-requests = <46>;
+        clocks = <&clock 22>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 0000000000..6a9d7bc74a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  QCOM ADM DMA controller provides DMA capabilities for
+  peripheral buses such as NAND and SPI.
+
+properties:
+  compatible:
+    const: qcom,adm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: phandle to the core clock
+      - description: phandle to the iface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    items:
+      - description: phandle to the clk reset
+      - description: phandle to the pbus reset
+      - description: phandle to the c0 reset
+      - description: phandle to the c1 reset
+      - description: phandle to the c2 reset
+
+  reset-names:
+    items:
+      - const: clk
+      - const: pbus
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: indicates the security domain identifier used in the secure world.
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - qcom,ee
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma-controller@18300000 {
+        compatible = "qcom,adm";
+        reg = <0x18300000 0x100000>;
+        interrupts = <0 170 0>;
+        #dma-cells = <1>;
+
+        clocks = <&gcc ADM0_CLK>,
+                  <&gcc ADM0_PBUS_CLK>;
+        clock-names = "core", "iface";
+
+        resets = <&gcc ADM0_RESET>,
+                  <&gcc ADM0_PBUS_RESET>,
+                  <&gcc ADM0_C0_RESET>,
+                  <&gcc ADM0_C1_RESET>,
+                  <&gcc ADM0_C2_RESET>;
+        reset-names = "clk", "pbus", "c0", "c1", "c2";
+        qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 0000000000..3ad0d9b1fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          # APQ8064, IPQ8064 and MSM8960
+          - qcom,bam-v1.3.0
+          # MSM8974, APQ8074 and APQ8084
+          - qcom,bam-v1.4.0
+          # MSM8916, SDM630
+          - qcom,bam-v1.7.0
+      - items:
+          - enum:
+              # SDM845, SM6115, SM8150, SM8250 and QCM2290
+              - qcom,bam-v1.7.4
+          - const: qcom,bam-v1.7.0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bam_clk
+
+  "#dma-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 6
+
+  num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of DMA channels in a remotely controlled bam.
+
+  qcom,controlled-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is controlled by remote processor i.e. execution
+      environment.
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      Indicates the active Execution Environment identifier (0-7) used in the
+      secure world.
+
+  qcom,num-ees:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of Execution Environments in a remotely
+      controlled bam.
+
+  qcom,powered-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is powered up by a remote processor but must be
+      initialized by the local processor.
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#dma-cells"
+  - interrupts
+  - qcom,ee
+  - reg
+
+anyOf:
+  - required:
+      - qcom,powered-remotely
+  - required:
+      - qcom,controlled-remotely
+  - required:
+      - clocks
+      - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    dma-controller@f9944000 {
+        compatible = "qcom,bam-v1.4.0";
+        reg = <0xf9944000 0x19000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+        clock-names = "bam_clk";
+        #dma-cells = <1>;
+        qcom,ee = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
new file mode 100644
index 0000000000..f61145c91b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,gpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc GPI DMA controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  QCOM GPI DMA controller provides DMA capabilities for
+  peripheral buses such as I2C, UART, and SPI.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdm845-gpi-dma
+          - qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,qcm2290-gpi-dma
+              - qcom,qdu1000-gpi-dma
+              - qcom,sc7280-gpi-dma
+              - qcom,sm6115-gpi-dma
+              - qcom,sm6375-gpi-dma
+              - qcom,sm8350-gpi-dma
+              - qcom,sm8450-gpi-dma
+              - qcom,sm8550-gpi-dma
+          - const: qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,sdm670-gpi-dma
+              - qcom,sm6125-gpi-dma
+              - qcom,sm8150-gpi-dma
+              - qcom,sm8250-gpi-dma
+          - const: qcom,sdm845-gpi-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for each GPI instance
+    minItems: 1
+    maxItems: 13
+
+  "#dma-cells":
+    const: 3
+    description: >
+      DMA clients must use the format described in dma.txt, giving a phandle
+      to the DMA controller plus the following 3 integer cells:
+      - channel: if set to 0xffffffff, any available channel will be allocated
+        for the client. Otherwise, the exact channel specified will be used.
+      - seid: serial id of the client as defined in the SoC documentation.
+      - client: type of the client as defined in dt-bindings/dma/qcom-gpi.h
+
+  iommus:
+    maxItems: 1
+
+  dma-channels:
+    maximum: 31
+
+  dma-channel-mask:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - iommus
+  - dma-channels
+  - dma-channel-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/dma/qcom-gpi.h>
+    gpi_dma0: dma-controller@800000 {
+        compatible = "qcom,sdm845-gpi-dma";
+        #dma-cells = <3>;
+        reg = <0x00800000 0x60000>;
+        iommus = <&apps_smmu 0x0016 0x0>;
+        dma-channels = <13>;
+        dma-channel-mask = <0xfa>;
+        interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
new file mode 100644
index 0000000000..1ae4748730
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
@@ -0,0 +1,95 @@
+Qualcomm Technologies HIDMA Management interface
+
+Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
+memcpy and memset capabilities. It has been designed for virtualized
+environments.
+
+Each HIDMA HW instance consists of multiple DMA channels. These channels
+share the same bandwidth. The bandwidth utilization can be partitioned
+among channels based on the priority and weight assignments.
+
+There are only two priority levels and 15 weigh assignments possible.
+
+Other parameters here determine how much of the system bus this HIDMA
+instance can use like maximum read/write request and number of bytes to
+read/write in a single burst.
+
+Main node required properties:
+- compatible: "qcom,hidma-mgmt-1.0";
+- reg: Address range for DMA device
+- dma-channels: Number of channels supported by this DMA controller.
+- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
+  occupy the bus for in a single transaction. A memcpy requested is
+  fragmented to multiples of this amount. This parameter is used while
+  writing into destination memory. Setting this value incorrectly can
+  starve other peripherals in the system.
+- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
+  occupy the bus for in a single transaction. A memcpy request is
+  fragmented to multiples of this amount. This parameter is used while
+  reading the source memory. Setting this value incorrectly can starve
+  other peripherals in the system.
+- max-write-transactions: This value is how many times a write burst is
+  applied back to back while writing to the destination before yielding
+  the bus.
+- max-read-transactions: This value is how many times a read burst is
+  applied back to back while reading the source before yielding the bus.
+- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
+  Once a reset is applied to the HW, HW starts a timer for reset operation
+  to confirm. If reset is not completed within this time, HW reports reset
+  failure.
+
+Sub-nodes:
+
+HIDMA has one or more DMA channels that are used to move data from one
+memory location to another.
+
+When the OS is not in control of the management interface (i.e. it's a guest),
+the channel nodes appear on their own, not under a management node.
+
+Required properties:
+- compatible: must contain "qcom,hidma-1.0" for initial HW or
+  "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
+- reg: Addresses for the transfer and event channel
+- interrupts: Should contain the event interrupt
+- desc-count: Number of asynchronous requests this channel can handle
+- iommus: required a iommu node
+
+Optional properties for MSI:
+- msi-parent : See the generic MSI binding described in
+ devicetree/bindings/interrupt-controller/msi.txt for a description of the
+ msi-parent property.
+
+Example:
+
+Hypervisor OS configuration:
+
+	hidma-mgmt@f9984000 = {
+		compatible = "qcom,hidma-mgmt-1.0";
+		reg = <0xf9984000 0x15000>;
+		dma-channels = <6>;
+		max-write-burst-bytes = <1024>;
+		max-read-burst-bytes = <1024>;
+		max-write-transactions = <31>;
+		max-read-transactions = <31>;
+		channel-reset-timeout-cycles = <0x500>;
+
+		hidma_24: dma-controller@5c050000 {
+			compatible = "qcom,hidma-1.0";
+			reg = <0 0x5c050000 0x0 0x1000>,
+			      <0 0x5c0b0000 0x0 0x1000>;
+			interrupts = <0 389 0>;
+			desc-count = <10>;
+			iommus = <&system_mmu>;
+		};
+	};
+
+Guest OS configuration:
+
+	hidma_24: dma-controller@5c050000 {
+		compatible = "qcom,hidma-1.0";
+		reg = <0 0x5c050000 0x0 0x1000>,
+		      <0 0x5c0b0000 0x0 0x1000>;
+		interrupts = <0 389 0>;
+		desc-count = <10>;
+		iommus = <&system_mmu>;
+	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt b/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt
new file mode 100644
index 0000000000..d2e1e62e34
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt
@@ -0,0 +1,69 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible:	must be one of
+		"renesas,nbpfaxi64dmac1b4"
+		"renesas,nbpfaxi64dmac1b8"
+		"renesas,nbpfaxi64dmac1b16"
+		"renesas,nbpfaxi64dmac4b4"
+		"renesas,nbpfaxi64dmac4b8"
+		"renesas,nbpfaxi64dmac4b16"
+		"renesas,nbpfaxi64dmac8b4"
+		"renesas,nbpfaxi64dmac8b8"
+		"renesas,nbpfaxi64dmac8b16"
+- #dma-cells:	must be 2: the first integer is a terminal number, to which this
+		slave is connected, the second one is flags. Flags is a bitmask
+		with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH	1
+#define NBPF_SLAVE_RQ_LOW	2
+#define NBPF_SLAVE_RQ_LEVEL	4
+
+Optional properties:
+- max-burst-mem-read:	limit burst size for memory reads
+  (DMA_MEM_TO_MEM/DMA_MEM_TO_DEV) to this value, specified in bytes, rather
+  than using the maximum burst size allowed by the hardware's buffer size.
+- max-burst-mem-write:	limit burst size for memory writes
+  (DMA_DEV_TO_MEM/DMA_MEM_TO_MEM) to this value, specified in bytes, rather
+  than using the maximum burst size allowed by the hardware's buffer size.
+  If both max-burst-mem-read and max-burst-mem-write are set, DMA_MEM_TO_MEM
+  will use the lower value.
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+	dma: dma-controller@48000000 {
+		compatible = "renesas,nbpfaxi64dmac8b4";
+		reg = <0x48000000 0x400>;
+		interrupts = <0 12 0x4
+			      0 13 0x4
+			      0 14 0x4
+			      0 15 0x4
+			      0 16 0x4
+			      0 17 0x4
+			      0 18 0x4
+			      0 19 0x4>;
+		#dma-cells = <2>;
+		dma-channels = <8>;
+		dma-requests = <8>;
+	};
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+		dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+			&dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+		dma-names = "rx", "tx";
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
new file mode 100644
index 0000000000..03aa067b12
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rcar-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G DMA Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,dmac-r8a7742  # RZ/G1H
+              - renesas,dmac-r8a7743  # RZ/G1M
+              - renesas,dmac-r8a7744  # RZ/G1N
+              - renesas,dmac-r8a7745  # RZ/G1E
+              - renesas,dmac-r8a77470 # RZ/G1C
+              - renesas,dmac-r8a774a1 # RZ/G2M
+              - renesas,dmac-r8a774b1 # RZ/G2N
+              - renesas,dmac-r8a774c0 # RZ/G2E
+              - renesas,dmac-r8a774e1 # RZ/G2H
+              - renesas,dmac-r8a7790  # R-Car H2
+              - renesas,dmac-r8a7791  # R-Car M2-W
+              - renesas,dmac-r8a7792  # R-Car V2H
+              - renesas,dmac-r8a7793  # R-Car M2-N
+              - renesas,dmac-r8a7794  # R-Car E2
+              - renesas,dmac-r8a7795  # R-Car H3
+              - renesas,dmac-r8a7796  # R-Car M3-W
+              - renesas,dmac-r8a77961 # R-Car M3-W+
+              - renesas,dmac-r8a77965 # R-Car M3-N
+              - renesas,dmac-r8a77970 # R-Car V3M
+              - renesas,dmac-r8a77980 # R-Car V3H
+              - renesas,dmac-r8a77990 # R-Car E3
+              - renesas,dmac-r8a77995 # R-Car D3
+          - const: renesas,rcar-dmac
+
+      - items:
+          - enum:
+              - renesas,dmac-r8a779a0     # R-Car V3U
+              - renesas,dmac-r8a779f0     # R-Car S4-8
+              - renesas,dmac-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-dmac # R-Car Gen4
+
+  reg: true
+
+  interrupts:
+    minItems: 9
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 9
+    items:
+      - const: error
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+      - pattern: "^ch([0-9]|1[0-5])$"
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the MID/RID of the DMAC port connected to
+      the DMA client.
+
+  dma-channels:
+    minimum: 8
+    maximum: 16
+
+  dma-channel-mask: true
+
+  iommus:
+    minItems: 8
+    maxItems: 16
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen4-dmac
+then:
+  properties:
+    reg:
+      items:
+        - description: Base register block
+        - description: Channel register block
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    dmac0: dma-controller@e6700000 {
+        compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
+        reg = <0xe6700000 0x20000>;
+        interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "error",
+                          "ch0", "ch1", "ch2", "ch3",
+                          "ch4", "ch5", "ch6", "ch7",
+                          "ch8", "ch9", "ch10", "ch11",
+                          "ch12", "ch13", "ch14";
+        clocks = <&cpg CPG_MOD 219>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 219>;
+        #dma-cells = <1>;
+        dma-channels = <15>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
new file mode 100644
index 0000000000..c284abc678
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,G2UL,V2L} DMA Controller
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-dmac # RZ/G2UL
+          - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+          - renesas,r9a07g054-dmac # RZ/V2L
+      - const: renesas,rz-dmac
+
+  reg:
+    items:
+      - description: Control and channel register block
+      - description: DMA extended resource selector block
+
+  interrupts:
+    maxItems: 17
+
+  interrupt-names:
+    items:
+      - const: error
+      - const: ch0
+      - const: ch1
+      - const: ch2
+      - const: ch3
+      - const: ch4
+      - const: ch5
+      - const: ch6
+      - const: ch7
+      - const: ch8
+      - const: ch9
+      - const: ch10
+      - const: ch11
+      - const: ch12
+      - const: ch13
+      - const: ch14
+      - const: ch15
+
+  clocks:
+    items:
+      - description: DMA main clock
+      - description: DMA register access clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: register
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the encoded MID/RID values of the DMAC port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9] - Specifies MID/RID value
+      bit[10] - Specifies DMA request high enable (HIEN)
+      bit[11] - Specifies DMA request detection type (LVL)
+      bits[12:14] - Specifies DMAACK output mode (AM)
+      bit[15] - Specifies Transfer Mode (TM)
+
+  dma-channels:
+    const: 16
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Reset for DMA ARESETN reset terminal
+      - description: Reset for DMA RST_ASYNC reset terminal
+
+  reset-names:
+    items:
+      - const: arst
+      - const: rst_async
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    dmac: dma-controller@11820000 {
+        compatible = "renesas,r9a07g044-dmac",
+                     "renesas,rz-dmac";
+        reg = <0x11820000 0x10000>,
+              <0x11830000 0x10000>;
+        interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "error",
+                          "ch0", "ch1", "ch2", "ch3",
+                          "ch4", "ch5", "ch6", "ch7",
+                          "ch8", "ch9", "ch10", "ch11",
+                          "ch12", "ch13", "ch14", "ch15";
+        clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+        clock-names = "main", "register";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_DMAC_ARESETN>,
+                 <&cpg R9A07G044_DMAC_RST_ASYNC>;
+        reset-names = "arst", "rst_async";
+        #dma-cells = <1>;
+        dma-channels = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 0000000000..ee9833dcc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: dma-router.yaml#
+
+properties:
+  compatible:
+    const: renesas,rzn1-dmamux
+
+  reg:
+    maxItems: 1
+    description: DMA mux first register offset within the system control parent.
+
+  '#dma-cells':
+    const: 6
+    description:
+      The first four cells are dedicated to the master DMA controller. The fifth
+      cell gives the DMA mux bit index that must be set starting from 0. The
+      sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+  dma-masters:
+    minItems: 1
+    maxItems: 2
+
+  dma-requests:
+    const: 32
+
+required:
+  - reg
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@a0 {
+      compatible = "renesas,rzn1-dmamux";
+      reg = <0xa0 4>;
+      #dma-cells = <6>;
+      dma-masters = <&dma0 &dma1>;
+      dma-requests = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
new file mode 100644
index 0000000000..17813599fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,usb-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB DMA Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7742-usb-dmac  # RZ/G1H
+          - renesas,r8a7743-usb-dmac  # RZ/G1M
+          - renesas,r8a7744-usb-dmac  # RZ/G1N
+          - renesas,r8a7745-usb-dmac  # RZ/G1E
+          - renesas,r8a77470-usb-dmac # RZ/G1C
+          - renesas,r8a774a1-usb-dmac # RZ/G2M
+          - renesas,r8a774b1-usb-dmac # RZ/G2N
+          - renesas,r8a774c0-usb-dmac # RZ/G2E
+          - renesas,r8a774e1-usb-dmac # RZ/G2H
+          - renesas,r8a7790-usb-dmac  # R-Car H2
+          - renesas,r8a7791-usb-dmac  # R-Car M2-W
+          - renesas,r8a7793-usb-dmac  # R-Car M2-N
+          - renesas,r8a7794-usb-dmac  # R-Car E2
+          - renesas,r8a7795-usb-dmac  # R-Car H3
+          - renesas,r8a7796-usb-dmac  # R-Car M3-W
+          - renesas,r8a77961-usb-dmac # R-Car M3-W+
+          - renesas,r8a77965-usb-dmac # R-Car M3-N
+          - renesas,r8a77990-usb-dmac # R-Car E3
+          - renesas,r8a77995-usb-dmac # R-Car D3
+      - const: renesas,usb-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - pattern: ch0
+      - pattern: ch1
+
+  clocks:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the channel number of the DMAC port connected to
+      the DMA client.
+
+  dma-channels:
+    const: 2
+
+  iommus:
+    minItems: 2
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    usb_dmac0: dma-controller@e65a0000 {
+        compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
+        reg = <0xe65a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ch0", "ch1";
+        clocks = <&cpg CPG_MOD 330>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 330>;
+        #dma-cells = <1>;
+        dma-channels = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
new file mode 100644
index 0000000000..a1af0b9063
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sifive,fu540-c000-pdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Unleashed Rev C000 Platform DMA
+
+maintainers:
+  - Green Wan <green.wan@sifive.com>
+  - Palmer Debbelt <palmer@sifive.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description: |
+  Platform DMA is a DMA engine of SiFive Unleashed. It supports 4
+  channels. Each channel has 2 interrupts. One is for DMA done and
+  the other is for DME error.
+
+  In different SoC, DMA could be attached to different IRQ line.
+  DT file need to be changed to meet the difference. For technical
+  doc,
+
+  https://static.dev.sifive.com/FU540-C000-v1.0.pdf
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sifive,fu540-c000-pdma
+      - const: sifive,pdma0
+    description:
+      Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the
+      SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block
+      with no chip integration tweaks.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  dma-channels:
+    description: For backwards-compatibility, the default value is 4
+    minimum: 1
+    maximum: 4
+    default: 4
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@3000000 {
+      compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+      reg = <0x3000000 0x8000>;
+      dma-channels = <4>;
+      interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
+      #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
new file mode 100644
index 0000000000..5da8291a7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware DMA Controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
+
+
+  "#dma-cells":
+    minimum: 3
+    maximum: 4
+    description: |
+      First cell is a phandle pointing to the DMA controller. Second one is
+      the DMA request line number. Third cell is the memory master identifier
+      for transfers on dynamically allocated channel. Fourth cell is the
+      peripheral master identifier for transfers on an allocated channel. Fifth
+      cell is an optional mask of the DMA channels permitted to be allocated
+      for the corresponding client device.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: AHB interface reference clock.
+    const: hclk
+
+  dma-channels:
+    description: |
+      Number of DMA channels supported by the controller. In case if
+      not specified the driver will try to auto-detect this and
+      the rest of the optional parameters.
+    minimum: 1
+    maximum: 8
+
+  dma-requests:
+    minimum: 1
+    maximum: 16
+
+  dma-masters:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of DMA masters supported by the controller. In case if
+      not specified the driver will try to auto-detect this and
+      the rest of the optional parameters.
+    minimum: 1
+    maximum: 4
+
+  chan_allocation_order:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DMA channels allocation order specifier. Zero means ascending order
+      (first free allocated), while one - descending (last free allocated).
+    default: 0
+    enum: [0, 1]
+
+  chan_priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DMA channels priority order. Zero means ascending channels priority
+      so the very first channel has the highest priority. While 1 means
+      descending priority (the last channel has the highest priority).
+    default: 0
+    enum: [0, 1]
+
+  block_size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Maximum block size supported by the DMA controller.
+    enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
+
+  data-width:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Data bus width per each DMA master in bytes.
+    items:
+      maxItems: 4
+      items:
+        enum: [4, 8, 16, 32]
+
+  data_width:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
+    description: |
+      Data bus width per each DMA master in (2^n * 8) bits. This property is
+      deprecated. It' usage is discouraged in favor of data-width one. Moreover
+      the property incorrectly permits to define data-bus width of 8 and 16
+      bits, which is impossible in accordance with DW DMAC IP-core data book.
+    items:
+      maxItems: 4
+      items:
+        enum:
+          - 0 # 8 bits
+          - 1 # 16 bits
+          - 2 # 32 bits
+          - 3 # 64 bits
+          - 4 # 128 bits
+          - 5 # 256 bits
+        default: 0
+
+  multi-block:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      LLP-based multi-block transfer supported by hardware per
+      each DMA channel.
+    items:
+      maxItems: 8
+      items:
+        enum: [0, 1]
+        default: 1
+
+  snps,max-burst-len:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Maximum length of the burst transactions supported by the controller.
+      This property defines the upper limit of the run-time burst setting
+      (CTLx.SRC_MSIZE/CTLx.DST_MSIZE fields) so the allowed burst length
+      will be from 1 to max-burst-len words. It's an array property with one
+      cell per channel in the units determined by the value set in the
+      CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+    items:
+      maxItems: 8
+      items:
+        enum: [4, 8, 16, 32, 64, 128, 256]
+        default: 256
+
+  snps,dma-protection-control:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
+      indicates the following features: bit 0 - privileged mode,
+      bit 1 - DMA is bufferable, bit 2 - DMA is cacheable.
+    default: 0
+    minimum: 0
+    maximum: 7
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - interrupts
+
+examples:
+  - |
+    dma-controller@fc000000 {
+      compatible = "snps,dma-spear1340";
+      reg = <0xfc000000 0x1000>;
+      interrupt-parent = <&vic1>;
+      interrupts = <12>;
+
+      dma-channels = <8>;
+      dma-requests = <16>;
+      dma-masters = <4>;
+      #dma-cells = <3>;
+
+      chan_allocation_order = <1>;
+      chan_priority = <1>;
+      block_size = <0xfff>;
+      data-width = <8 8>;
+      multi-block = <0 0 0 0 0 0 0 0>;
+      snps,max-burst-len = <16 16 4 4 4 4 4 4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
new file mode 100644
index 0000000000..363cf8bd15
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AXI DMA Controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description:
+  Synopsys DesignWare AXI DMA Controller DT Binding
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - snps,axi-dma-1.01a
+      - intel,kmb-axi-dma
+      - starfive,jh7110-axi-dma
+
+  reg:
+    minItems: 1
+    items:
+      - description: Address range of the DMAC registers
+      - description: Address range of the DMAC APB registers
+
+  reg-names:
+    items:
+      - const: axidma_ctrl_regs
+      - const: axidma_apb_regs
+
+  interrupts:
+    description:
+      If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+      will be per-channel interrupts. Otherwise, this is a single combined IRQ
+      for all channels.
+    minItems: 1
+    maxItems: 8
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: cfgr-clk
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    minimum: 1
+    maximum: 8
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  snps,dma-masters:
+    description: |
+      Number of AXI masters supported by the hardware.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  snps,data-width:
+    description: |
+      AXI data width supported by hardware.
+      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  snps,priority:
+    description: |
+      Channel priority specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,block-size:
+    description: |
+      Channel block size specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,axi-max-burst-len:
+    description: |
+      Restrict master AXI burst length by value specified in this property.
+      If this property is missing the maximum AXI burst length supported by
+      DMAC is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 256
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#dma-cells'
+  - dma-channels
+  - snps,dma-masters
+  - snps,data-width
+  - snps,priority
+  - snps,block-size
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh7110-axi-dma
+then:
+  properties:
+    resets:
+      minItems: 2
+      items:
+        - description: AXI reset line
+        - description: AHB reset line
+        - description: module reset
+else:
+  properties:
+    resets:
+      maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /* example with snps,dw-axi-dmac */
+    dma-controller@80000 {
+        compatible = "snps,axi-dma-1.01a";
+        reg = <0x80000 0x400>;
+        clocks = <&core_clk>, <&cfgr_clk>;
+        clock-names = "core-clk", "cfgr-clk";
+        interrupt-parent = <&intc>;
+        interrupts = <27>;
+        #dma-cells = <1>;
+        dma-channels = <4>;
+        snps,dma-masters = <2>;
+        snps,data-width = <3>;
+        snps,block-size = <4096 4096 4096 4096>;
+        snps,priority = <0 1 2 3>;
+        snps,axi-max-burst-len = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
new file mode 100644
index 0000000000..23c8a7bf24
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+  This works as an external DMA engine for SD/eMMC controllers etc.
+  found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-mio-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      A list of interrupt specifiers associated with the DMA channels.
+      The number of interrupt lines is SoC-dependent.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#dma-cells':
+    description: The single cell represents the channel index.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+    // typo. The first two channels share a single interrupt line.
+
+    dmac: dma-controller@5a000000 {
+        compatible = "socionext,uniphier-mio-dmac";
+        reg = <0x5a000000 0x1000>;
+        interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+                     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+        clocks = <&mio_clk 7>;
+        resets = <&mio_rst 7>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
new file mode 100644
index 0000000000..da61d1ddc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-xdmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier external DMA controller
+
+description: |
+  This describes the devicetree bindings for an external DMA engine to perform
+  memory-to-memory or peripheral-to-memory data transfer capable of supporting
+  16 channels, implemented in Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-xdmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 2
+    description: |
+      DMA request from clients consists of 2 cells:
+        1. Channel index
+        2. Transfer request factor number, If no transfer factor, use 0.
+           The number is SoC-specific, and this should be specified with
+           relation to the device to use the DMA controller.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+
+examples:
+  - |
+    xdmac: dma-controller@5fc10000 {
+        compatible = "socionext,uniphier-xdmac";
+        reg = <0x5fc10000 0x5300>;
+        interrupts = <0 188 4>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
new file mode 100644
index 0000000000..c7e9b5fd50
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -0,0 +1,44 @@
+* Spreadtrum DMA controller
+
+This binding follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel.
+- #dma-cells: must be <1>. Used to represent the number of integer
+	cells in the dmas property of client device.
+- dma-channels : Number of DMA channels supported. Should be 32.
+- clock-names: Should contain the clock of the DMA controller.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+
+Deprecated properties:
+- #dma-channels : Number of DMA channels supported. Should be 32.
+
+Example:
+
+Controller:
+apdma: dma-controller@20100000 {
+	compatible = "sprd,sc9860-dma";
+	reg = <0x20100000 0x4000>;
+	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+	#dma-cells = <1>;
+	dma-channels = <32>;
+	clock-names = "enable";
+	clocks = <&clk_ap_ahb_gates 5>;
+};
+
+
+Client:
+DMA clients connected to the Spreadtrum DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. The slave id.
+
+spi0: spi@70a00000{
+	...
+	dma-names = "rx_chn", "tx_chn";
+	dmas = <&apdma 11>, <&apdma 12>;
+	...
+};
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
new file mode 100644
index 0000000000..329847ef09
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA Controller
+
+description: |
+  The STM32 DMA is a general-purpose direct memory access controller capable of
+  supporting 8 independent DMA channels. Each channel can have up to 8 requests.
+  DMA clients connected to the STM32 DMA controller must use the format
+  described in the dma.txt file, using a four-cell specifier for each
+  channel: a phandle to the DMA controller plus the following four integer cells:
+    1. The channel id
+    2. The request line number
+    3. A 32bit mask specifying the DMA channel configuration which are device
+      dependent:
+        -bit 9: Peripheral Increment Address
+          0x0: no address increment between transfers
+          0x1: increment address between transfers
+        -bit 10: Memory Increment Address
+          0x0: no address increment between transfers
+          0x1: increment address between transfers
+        -bit 15: Peripheral Increment Offset Size
+          0x0: offset size is linked to the peripheral bus width
+          0x1: offset size is fixed to 4 (32-bit alignment)
+        -bit 16-17: Priority level
+          0x0: low
+          0x1: medium
+          0x2: high
+          0x3: very high
+    4. A 32bit bitfield value specifying DMA features which are device dependent:
+       -bit 0-1: DMA FIFO threshold selection
+         0x0: 1/4 full FIFO
+         0x1: 1/2 full FIFO
+         0x2: 3/4 full FIFO
+         0x3: full FIFO
+       -bit 2: DMA direct mode
+         0x0: FIFO mode with threshold selectable with bit 0-1
+         0x1: Direct mode: each DMA request immediately initiates a transfer
+              from/to the memory, FIFO is bypassed.
+       -bit 4: alternative DMA request/acknowledge protocol
+         0x0: Use standard DMA ACK management, where ACK signal is maintained
+              up to the removal of request and transfer completion
+         0x1: Use alternative DMA ACK management, where ACK de-assertion does
+              not wait for the de-assertion of the REQuest, ACK is only managed
+              by transfer completion. This must only be used on channels
+              managing transfers for STM32 USART/UART.
+
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 4
+
+  compatible:
+    const: st,stm32-dma
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 8
+    description: Should contain all of the per-channel DMA
+      interrupts in ascending order with respect to the
+      DMA channel index.
+
+  resets:
+    maxItems: 1
+
+  st,mem2mem:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: if defined, it indicates that the controller
+      supports memory-to-memory transfer
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-controller@40026400 {
+      compatible = "st,stm32-dma";
+      reg = <0x40026400 0x400>;
+      interrupts = <56>,
+                   <57>,
+                   <58>,
+                   <59>,
+                   <60>,
+                   <68>,
+                   <69>,
+                   <70>;
+      clocks = <&clk_hclk>;
+      #dma-cells = <4>;
+      st,mem2mem;
+      resets = <&rcc 150>;
+      dma-requests = <8>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
new file mode 100644
index 0000000000..e722fbcd8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA MUX (DMA request router)
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+  - $ref: dma-router.yaml#
+
+properties:
+  "#dma-cells":
+    const: 3
+
+  compatible:
+    const: st,stm32h7-dmamux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - dma-masters
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-router@40020800 {
+      compatible = "st,stm32h7-dmamux";
+      reg = <0x40020800 0x3c>;
+      #dma-cells = <3>;
+      dma-requests = <128>;
+      dma-channels = <16>;
+      dma-masters = <&dma1>, <&dma2>;
+      clocks = <&timer_clk>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
new file mode 100644
index 0000000000..3874544dfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 MDMA Controller
+
+description: |
+  The STM32 MDMA is a general-purpose direct memory access controller capable of
+  supporting 64 independent DMA channels with 256 HW requests.
+  DMA clients connected to the STM32 MDMA controller must use the format
+  described in the dma.txt file, using a five-cell specifier for each channel:
+  a phandle to the MDMA controller plus the following five integer cells:
+    1. The request line number
+    2. The priority level
+      0x0: Low
+      0x1: Medium
+      0x2: High
+      0x3: Very high
+    3. A 32bit mask specifying the DMA channel configuration
+      -bit 0-1: Source increment mode
+        0x0: Source address pointer is fixed
+        0x2: Source address pointer is incremented after each data transfer
+        0x3: Source address pointer is decremented after each data transfer
+      -bit 2-3: Destination increment mode
+        0x0: Destination address pointer is fixed
+        0x2: Destination address pointer is incremented after each data transfer
+        0x3: Destination address pointer is decremented after each data transfer
+      -bit 8-9: Source increment offset size
+        0x0: byte (8bit)
+        0x1: half-word (16bit)
+        0x2: word (32bit)
+        0x3: double-word (64bit)
+      -bit 10-11: Destination increment offset size
+        0x0: byte (8bit)
+        0x1: half-word (16bit)
+        0x2: word (32bit)
+        0x3: double-word (64bit)
+      -bit 25-18: The number of bytes to be transferred in a single transfer
+                  (min = 1 byte, max = 128 bytes)
+      -bit 29:28: Trigger Mode
+        0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
+        0x1: Each MDMA request triggers a block transfer (max 64K bytes)
+        0x2: Each MDMA request triggers a repeated block transfer
+        0x3: Each MDMA request triggers a linked list transfer
+    4. A 32bit value specifying the register to be used to acknowledge the request
+       if no HW ack signal is used by the MDMA client
+    5. A 32bit mask specifying the value to be written to acknowledge the request
+       if no HW ack signal is used by the MDMA client
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 5
+
+  compatible:
+    const: st,stm32h7-mdma
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  st,ahb-addr-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 mask to list memory devices addressed via AHB bus.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-controller@52000000 {
+      compatible = "st,stm32h7-mdma";
+      reg = <0x52000000 0x1000>;
+      interrupts = <122>;
+      clocks = <&timer_clk>;
+      resets = <&rcc 992>;
+      #dma-cells = <5>;
+      dma-channels = <16>;
+      dma-requests = <32>;
+      st,ahb-addr-masks = <0x20000000>, <0x00000000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
new file mode 100644
index 0000000000..52cfec9e77
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -0,0 +1,86 @@
+* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
+
+The FDMA is a general-purpose direct memory access controller capable of
+supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
+The FDMA is based on a Slim processor which requires a firmware.
+
+* FDMA Controller
+
+Required properties:
+- compatible	: Should be one of
+		 - st,stih407-fdma-mpe31-11, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-12, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-13, "st,slim-rproc";
+- reg		: Should contain an entry for each name in reg-names
+- reg-names	: Must contain "slimcore", "dmem", "peripherals", "imem" entries
+- interrupts	: Should contain one interrupt shared by all channels
+- dma-channels	: Number of channels supported by the controller
+- #dma-cells	: Must be <3>. See DMA client section below
+- clocks	: Must contain an entry for each clock
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Example:
+
+	fdma0: dma-controller@8e20000 {
+		compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+		reg = <0x8e20000 0x8000>,
+		      <0x8e30000 0x3000>,
+		      <0x8e37000 0x1000>,
+		      <0x8e38000 0x8000>;
+		reg-names = "slimcore", "dmem", "peripherals", "imem";
+		clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+		dma-channels = <16>;
+		#dma-cells = <3>;
+	};
+
+* DMA client
+
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+1. A phandle pointing to the FDMA controller
+2. The request line number
+3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
+ -bit 2-0: Holdoff value, dreq will be masked for
+	0x0: 0-0.5us
+	0x1: 0.5-1us
+	0x2: 1-1.5us
+ -bit 17: data swap
+	0x0: disabled
+	0x1: enabled
+ -bit 21: Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 22: 2 STBus Initiator Coprocessor interface
+	0x0: high priority port
+	0x1: low priority port
+4. transfers type
+ 0 free running
+ 1 paced
+
+Example:
+
+	sti_uni_player2: sti-uni-player@2 {
+		compatible = "st,sti-uni-player";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clock-parents = <&clk_s_d0_quadfs 2>;
+		assigned-clock-rates = <50000000>;
+		reg = <0x8D82000 0x158>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 4 0 1>;
+		dai-name = "Uni Player #1 (DAC)";
+		dma-names = "tx";
+		st,uniperiph-id = <2>;
+		st,version = <5>;
+		st,mode = "PCM";
+	};
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
new file mode 100644
index 0000000000..7b94d24d5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DMA40 DMA Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for DB8500 which is the only ASIC known to use DMA40:
+
+      0:  SPI controller 0
+      1:  SD/MMC controller 0 (unused)
+      2:  SD/MMC controller 1 (unused)
+      3:  SD/MMC controller 2 (unused)
+      4:  I2C port 1
+      5:  I2C port 3
+      6:  I2C port 2
+      7:  I2C port 4
+      8:  Synchronous Serial Port SSP0
+      9:  Synchronous Serial Port SSP1
+      10: Multi-Channel Display Engine MCDE RX
+      11: UART port 2
+      12: UART port 1
+      13: UART port 0
+      14: Multirate Serial Port MSP2
+      15: I2C port 0
+      16: USB OTG in/out endpoints 7 & 15
+      17: USB OTG in/out endpoints 6 & 14
+      18: USB OTG in/out endpoints 5 & 13
+      19: USB OTG in/out endpoints 4 & 12
+      20: SLIMbus or HSI channel 0
+      21: SLIMbus or HSI channel 1
+      22: SLIMbus or HSI channel 2
+      23: SLIMbus or HSI channel 3
+      24: Multimedia DSP SXA0
+      25: Multimedia DSP SXA1
+      26: Multimedia DSP SXA2
+      27: Multimedia DSP SXA3
+      28: SD/MMC controller 2
+      29: SD/MMC controller 0
+      30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+      31: MSP port 0 or SLIMbus channel 0
+      32: SD/MMC controller 1
+      33: SPI controller 2
+      34: i2c3 RX2 TX2
+      35: SPI controller 1
+      36: USB OTG in/out endpoints 3 & 11
+      37: USB OTG in/out endpoints 2 & 10
+      38: USB OTG in/out endpoints 1 & 9
+      39: USB OTG in/out endpoints 8
+      40: SPI controller 3
+      41: SD/MMC controller 3
+      42: SD/MMC controller 4
+      43: SD/MMC controller 5
+      44: Multimedia DSP SXA4
+      45: Multimedia DSP SXA5
+      46: SLIMbus channel 8 or Multimedia DSP SXA6
+      47: SLIMbus channel 9 or Multimedia DSP SXA7
+      48: Crypto Accelerator 1
+      49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+      50: Hash Accelerator 1 TX
+      51: memcpy TX (to be used by the DMA driver for memcpy operations)
+      52: SLIMbus or HSI channel 4
+      53: SLIMbus or HSI channel 5
+      54: SLIMbus or HSI channel 6
+      55: SLIMbus or HSI channel 7
+      56: memcpy (to be used by the DMA driver for memcpy operations)
+      57: memcpy (to be used by the DMA driver for memcpy operations)
+      58: memcpy (to be used by the DMA driver for memcpy operations)
+      59: memcpy (to be used by the DMA driver for memcpy operations)
+      60: memcpy (to be used by the DMA driver for memcpy operations)
+      61: Crypto Accelerator 0
+      62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+      63: Hash Accelerator 0 TX
+
+      The second cell is the DMA request line number. This is only used when
+      a fixed channel is allocated, and indicated by setting bit 3 in the
+      flags field (see below).
+
+      The third cell is a 32bit flags bitfield with the following possible
+      bits set:
+      0x00000001 (bit 0) - mode:
+        Logical channel when unset
+        Physical channel when set
+      0x00000002 (bit 1) - direction:
+        Memory to Device when unset
+        Device to Memory when set
+      0x00000004 (bit 2) - endianness:
+        Little endian when unset
+        Big endian when set
+      0x00000008 (bit 3) - use fixed channel:
+        Use automatic channel selection when unset
+        Use DMA request line number when set
+      0x00000010 (bit 4) - set channel as high priority:
+        Normal priority when unset
+        High priority when set
+
+  compatible:
+    items:
+      - const: stericsson,db8500-dma40
+      - const: stericsson,dma40
+
+  reg:
+    oneOf:
+      - items:
+          - description: DMA40 memory base
+      - items:
+          - description: DMA40 memory base
+          - description: LCPA memory base, deprecated, use eSRAM pool instead
+        deprecated: true
+
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: base
+      - items:
+          - const: base
+          - const: lcpa
+        deprecated: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A phandle array with inner size 1 (no arg cells).
+      First phandle is the LCPA (Logical Channel Parameter Address) memory.
+      Second phandle is the  LCLA (Logical Channel Link base Address) memory.
+    maxItems: 2
+    items:
+      maxItems: 1
+
+  memcpy-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 elements indicating which channels on the DMA
+      engine are eligible for memcpy transfers
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - sram
+  - memcpy-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    dma-controller@801c0000 {
+        compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+        reg = <0x801c0000 0x1000>;
+        reg-names = "base";
+        sram = <&lcpa>, <&lcla>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <3>;
+        memcpy-channels = <56 57 58 59 60>;
+        clocks = <&prcmu_clk PRCMU_DMACLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
new file mode 100644
index 0000000000..47e477cce6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -0,0 +1,68 @@
+Texas Instruments DMA Crossbar (DMA request router)
+
+Required properties:
+- compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
+		"ti,am335x-edma-crossbar" for AM335x and AM437x
+- reg:		Memory map for accessing module
+- #dma-cells:	Should be set to match with the DMA controller's dma-cells
+		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
+- dma-requests:	Number of DMA requests the crossbar can receive
+- dma-masters:	phandle pointing to the DMA controller
+
+The DMA controller node need to have the following poroperties:
+- dma-requests:	Number of DMA requests the controller can handle
+
+Optional properties:
+- ti,dma-safe-map: Safe routing value for unused request lines
+- ti,reserved-dma-request-ranges: DMA request ranges which should not be used
+		when mapping xbar input to DMA request, they are either
+		allocated to be used by for example the DSP or they are used as
+		memcpy channels in eDMA.
+
+Notes:
+When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
+the DMA event number as crossbar ID (input to the DMA crossbar).
+
+For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients:
+dmas = <&edma_xbar 12 0 1>; where <12> is the DMA request number, <0> is the TC
+the event should be assigned and <1> is the mux selection for in the crossbar.
+When mux 0 is used the DMA channel can be requested directly from edma node.
+
+Example:
+
+/* DMA controller */
+sdma: dma-controller@4a056000 {
+	compatible = "ti,omap4430-sdma";
+	reg = <0x4a056000 0x1000>;
+	interrupts =	<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	#dma-cells = <1>;
+	dma-channels = <32>;
+	dma-requests = <127>;
+};
+
+/* DMA crossbar */
+sdma_xbar: dma-router@4a002b78 {
+	compatible = "ti,dra7-dma-crossbar";
+	reg = <0x4a002b78 0xfc>;
+	#dma-cells = <1>;
+	dma-requests = <205>;
+	ti,dma-safe-map = <0>;
+	/* Protect the sDMA request ranges: 10-14 and 100-126 */
+	ti,reserved-dma-request-ranges = <10 5>, <100 27>;
+	dma-masters = <&sdma>;
+};
+
+/* DMA client */
+uart1: serial@4806a000 {
+	compatible = "ti,omap4-uart";
+	reg = <0x4806a000 0x100>;
+	interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+	ti,hwmods = "uart1";
+	clock-frequency = <48000000>;
+	/* Requesting crossbar input 49 and 50 */
+	dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
new file mode 100644
index 0000000000..f719e1612b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -0,0 +1,238 @@
+Texas Instruments eDMA
+
+The eDMA3 consists of two components: Channel controller (CC) and Transfer
+Controller(s) (TC). The CC is the main entry for DMA users since it is
+responsible for the DMA channel handling, while the TCs are responsible to
+execute the actual DMA tansfer.
+
+------------------------------------------------------------------------------
+eDMA3 Channel Controller
+
+Required properties:
+--------------------
+- compatible:	Should be:
+		- "ti,edma3-tpcc" for the channel controller(s) on OMAP,
+		  AM33xx and AM43xx SoCs.
+		- "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the
+		  channel controller(s) on 66AK2G.
+- #dma-cells:	Should be set to <2>. The first number is the DMA request
+		number and the second is the TC the channel is serviced on.
+- reg:		Memory map of eDMA CC
+- reg-names:	"edma3_cc"
+- interrupts:	Interrupt lines for CCINT, MPERR and CCERRINT.
+- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"
+- ti,tptcs:	List of TPTCs associated with the eDMA in the following form:
+		<&tptc_phandle TC_priority_number>. The highest priority is 0.
+
+SoC-specific Required properties:
+--------------------------------
+The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
+- ti,hwmods:	Name of the hwmods associated to the eDMA CC.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+		and an args specifier containing the device id
+		value. This property is as per the binding,
+		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+Optional properties:
+-------------------
+- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
+		these channels will be SW triggered channels. See example.
+- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
+		the driver, they are allocated to be used by for example the
+		DSP. See example.
+- dma-channel-mask: Mask of usable channels.
+		Single uint32 for EDMA with 32 channels, array of two uint32 for
+		EDMA with 64 channels. See example and
+		Documentation/devicetree/bindings/dma/dma-common.yaml
+
+
+------------------------------------------------------------------------------
+eDMA3 Transfer Controller
+
+Required properties:
+--------------------
+- compatible:	Should be:
+		- "ti,edma3-tptc" for the transfer controller(s) on OMAP,
+		  AM33xx and AM43xx SoCs.
+		- "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the
+		  transfer controller(s) on 66AK2G.
+- reg:		Memory map of eDMA TC
+- interrupts:	Interrupt number for TCerrint.
+
+SoC-specific Required properties:
+--------------------------------
+The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
+- ti,hwmods:	Name of the hwmods associated to the eDMA TC.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+		and an args specifier containing the device id
+		value. This property is as per the binding,
+		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+Optional properties:
+-------------------
+- interrupt-names: "edma3_tcerrint"
+
+------------------------------------------------------------------------------
+Examples:
+
+1.
+edma: edma@49000000 {
+	compatible = "ti,edma3-tpcc";
+	ti,hwmods = "tpcc";
+	reg =	<0x49000000 0x10000>;
+	reg-names = "edma3_cc";
+	interrupts = <12 13 14>;
+	interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";
+	dma-requests = <64>;
+	#dma-cells = <2>;
+
+	ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
+
+	/* Channel 20 and 21 is allocated for memcpy */
+	ti,edma-memcpy-channels = <20 21>;
+	/* The following PaRAM slots are reserved: 35-44 and 100-109 */
+	ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
+	/* The following channels are reserved: 35-44 */
+	dma-channel-mask = <0xffffffff /* Channel 0-31 */
+			    0xffffe007>; /* Channel 32-63 */
+};
+
+edma_tptc0: tptc@49800000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc0";
+	reg =	<0x49800000 0x100000>;
+	interrupts = <112>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc1: tptc@49900000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc1";
+	reg =	<0x49900000 0x100000>;
+	interrupts = <113>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc2: tptc@49a00000 {
+	compatible = "ti,edma3-tptc";
+	ti,hwmods = "tptc2";
+	reg =	<0x49a00000 0x100000>;
+	interrupts = <114>;
+	interrupt-names = "edm3_tcerrint";
+};
+
+sham: sham@53100000 {
+	compatible = "ti,omap4-sham";
+	ti,hwmods = "sham";
+	reg = <0x53100000 0x200>;
+	interrupts = <109>;
+	/* DMA channel 36 executed on eDMA TC0 - low priority queue */
+	dmas = <&edma 36 0>;
+	dma-names = "rx";
+};
+
+mcasp0: mcasp@48038000 {
+	compatible = "ti,am33xx-mcasp-audio";
+	ti,hwmods = "mcasp0";
+	reg = <0x48038000 0x2000>,
+		<0x46000000 0x400000>;
+	reg-names = "mpu", "dat";
+	interrupts = <80>, <81>;
+	interrupt-names = "tx", "rx";
+	/* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
+	dmas = <&edma 8 2>,
+	       <&edma 9 2>;
+	dma-names = "tx", "rx";
+};
+
+2.
+edma1: edma@2728000 {
+	compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+	reg =	<0x02728000 0x8000>;
+	reg-names = "edma3_cc";
+	interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+			<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+			<GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "edma3_ccint", "emda3_mperr",
+			  "edma3_ccerrint";
+	dma-requests = <64>;
+	#dma-cells = <2>;
+
+	ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
+
+	/*
+	 * memcpy is disabled, can be enabled with:
+	 * ti,edma-memcpy-channels = <12 13 14 15>;
+	 * for example.
+	 */
+
+	power-domains = <&k2g_pds 0x4f>;
+};
+
+edma1_tptc0: tptc@27b0000 {
+	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+	reg =	<0x027b0000 0x400>;
+	power-domains = <&k2g_pds 0x4f>;
+};
+
+edma1_tptc1: tptc@27b8000 {
+	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+	reg =	<0x027b8000 0x400>;
+	power-domains = <&k2g_pds 0x4f>;
+};
+
+mmc0: mmc@23000000 {
+	compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+	reg = <0x23000000 0x400>;
+	interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+	dmas = <&edma1 24 0>, <&edma1 25 0>;
+	dma-names = "tx", "rx";
+	bus-width = <4>;
+	ti,needs-special-reset;
+	no-1-8-v;
+	max-frequency = <96000000>;
+	power-domains = <&k2g_pds 0xb>;
+	clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+	clock-names = "fck", "mmchsdb_fck";
+};
+
+------------------------------------------------------------------------------
+DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
+binding.
+
+Required properties:
+- compatible : "ti,edma3"
+- #dma-cells: Should be set to <1>
+              Clients should use a single channel number per DMA request.
+- reg: Memory map for accessing module
+- interrupts: Exactly 3 interrupts need to be specified in the order:
+              1. Transfer completion interrupt.
+              2. Memory protection interrupt.
+              3. Error interrupt.
+Optional properties:
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-xbar-event-map: Crossbar event to channel map
+
+Deprecated properties:
+Listed here in case one wants to boot an old kernel with new DTB. These
+properties might need to be added to the new DTS files.
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- dma-channels: Specify total DMA channels per CC
+
+Example:
+
+edma: edma@49000000 {
+	reg = <0x49000000 0x10000>;
+	interrupt-parent = <&intc>;
+	interrupts = <12 13 14>;
+	compatible = "ti,edma3";
+	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+	#dma-cells = <1>;
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+					    2 13>;
+};
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
new file mode 100644
index 0000000000..4ca300a42a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 DMSS BCDMA
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR
+  mode channels of K3 UDMA-P.
+  BCDMA includes block copy channels and Split channels.
+
+  Block copy channels mainly used for memory to memory transfers, but with
+  optional triggers a block copy channel can service peripherals by accessing
+  directly to memory mapped registers or area.
+
+  Split channels can be used to service PSI-L based peripherals.
+  The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
+  with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
+  legacy peripheral.
+
+  PDMAs can be configured via BCDMA split channel's peer registers to match with
+  the configuration of the legacy peripheral.
+
+properties:
+  compatible:
+    enum:
+      - ti,am62a-dmss-bcdma-csirx
+      - ti,am64-dmss-bcdma
+      - ti,j721s2-dmss-bcdma-csi
+
+  reg:
+    minItems: 3
+    maxItems: 5
+
+  reg-names:
+    minItems: 3
+    maxItems: 5
+
+  "#dma-cells":
+    const: 3
+    description: |
+      cell 1: type of the BCDMA channel to be used to service the peripheral:
+        0 - split channel
+        1 - block copy channel using global trigger 1
+        2 - block copy channel using global trigger 2
+        3 - block copy channel using local trigger
+
+      cell 2: parameter for the channel:
+        if cell 1 is 0 (split channel):
+          PSI-L thread ID of the remote (to BCDMA) end.
+          Valid ranges for thread ID depends on the data movement direction:
+          for source thread IDs (rx): 0 - 0x7fff
+          for destination thread IDs (tx): 0x8000 - 0xffff
+
+          Please refer to the device documentation for the PSI-L thread map and
+          also the PSI-L peripheral chapter for the correct thread ID.
+        if cell 1 is 1 or 2 (block copy channel using global trigger):
+          Unused, ignored
+
+          The trigger must be configured for the channel externally to BCDMA,
+          channels using global triggers should not be requested directly, but
+          via DMA event router.
+        if cell 1 is 3 (block copy channel using local trigger):
+          bchan number of the locally triggered channel
+
+      cell 3: ASEL value for the channel
+
+  msi-parent: true
+
+  power-domains:
+    description:
+      Power domain if available
+    maxItems: 1
+
+  ti,asel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: ASEL value for non slave channels
+
+  ti,sci-rm-range-bchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of BCDMA block-copy channel resource subtypes for resource
+      allocation for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-tchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of BCDMA split tx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-rchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of BCDMA split rx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-rm-range-rchan
+
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62a-dmss-bcdma-csirx
+    then:
+      properties:
+        ti,sci-rm-range-bchan: false
+        ti,sci-rm-range-tchan: false
+
+        reg:
+          maxItems: 3
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: rchanrt
+            - const: ringrt
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-dmss-bcdma
+    then:
+      properties:
+        reg:
+          minItems: 5
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: bchanrt
+            - const: rchanrt
+            - const: tchanrt
+            - const: ringrt
+
+      required:
+        - ti,sci-rm-range-bchan
+        - ti,sci-rm-range-tchan
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721s2-dmss-bcdma-csi
+    then:
+      properties:
+        ti,sci-rm-range-bchan: false
+
+        reg:
+          maxItems: 4
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: rchanrt
+            - const: tchanrt
+            - const: ringrt
+
+      required:
+        - ti,sci-rm-range-tchan
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_dmss {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-ranges;
+            ranges;
+
+            ti,sci-dev-id = <25>;
+
+            main_bcdma: dma-controller@485c0100 {
+                compatible = "ti,am64-dmss-bcdma";
+
+                reg = <0x0 0x485c0100 0x0 0x100>,
+                      <0x0 0x4c000000 0x0 0x20000>,
+                      <0x0 0x4a820000 0x0 0x20000>,
+                      <0x0 0x4aa40000 0x0 0x20000>,
+                      <0x0 0x4bc00000 0x0 0x100000>;
+                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+                msi-parent = <&inta_main_dmss>;
+                #dma-cells = <3>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <26>;
+
+                ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+                ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+                ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
new file mode 100644
index 0000000000..a69f62f854
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 DMSS PKTDMA
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The Packet DMA (PKTDMA) is intended to perform similar functions as the packet
+  mode channels of K3 UDMA-P.
+  PKTDMA only includes Split channels to service PSI-L based peripherals.
+
+  The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
+  with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
+  legacy peripheral.
+
+  PDMAs can be configured via PKTDMA split channel's peer registers to match
+  with the configuration of the legacy peripheral.
+
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    const: ti,am64-dmss-pktdma
+
+  "#dma-cells":
+    const: 2
+    description: |
+      The first cell is the PSI-L  thread ID of the remote (to PKTDMA) end.
+      Valid ranges for thread ID depends on the data movement direction:
+      for source thread IDs (rx): 0 - 0x7fff
+      for destination thread IDs (tx): 0x8000 - 0xffff
+
+      Please refer to the device documentation for the PSI-L thread map and also
+      the PSI-L peripheral chapter for the correct thread ID.
+
+      The second cell is the ASEL value for the channel
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
+      - const: ringrt
+
+  msi-parent: true
+
+  ti,sci-rm-range-tchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split tx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-tflow:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split tx flow resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-rchan:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split rx channel resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+  ti,sci-rm-range-rflow:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of PKTDMA split rx flow resource subtypes for resource allocation
+      for this host
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+    items:
+      maximum: 0x3f
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-rm-range-tchan
+  - ti,sci-rm-range-tflow
+  - ti,sci-rm-range-rchan
+  - ti,sci-rm-range-rflow
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_dmss {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-ranges;
+            ranges;
+
+            ti,sci-dev-id = <25>;
+
+            main_pktdma: dma-controller@485c0000 {
+                compatible = "ti,am64-dmss-pktdma";
+
+                reg = <0x0 0x485c0000 0x0 0x100>,
+                      <0x0 0x4a800000 0x0 0x20000>,
+                      <0x0 0x4aa00000 0x0 0x40000>,
+                      <0x0 0x4b800000 0x0 0x400000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+                msi-parent = <&inta_main_dmss>;
+                #dma-cells = <2>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <30>;
+
+                ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+                                        <0x24>, /* CPSW_TX_CHAN */
+                                        <0x25>, /* SAUL_TX_0_CHAN */
+                                        <0x26>, /* SAUL_TX_1_CHAN */
+                                        <0x27>, /* ICSSG_0_TX_CHAN */
+                                        <0x28>; /* ICSSG_1_TX_CHAN */
+                ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+                                        <0x11>, /* RING_CPSW_TX_CHAN */
+                                        <0x12>, /* RING_SAUL_TX_0_CHAN */
+                                        <0x13>, /* RING_SAUL_TX_1_CHAN */
+                                        <0x14>, /* RING_ICSSG_0_TX_CHAN */
+                                        <0x15>; /* RING_ICSSG_1_TX_CHAN */
+                ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+                                        <0x2b>, /* CPSW_RX_CHAN */
+                                        <0x2d>, /* SAUL_RX_0_CHAN */
+                                        <0x2f>, /* SAUL_RX_1_CHAN */
+                                        <0x31>, /* SAUL_RX_2_CHAN */
+                                        <0x33>, /* SAUL_RX_3_CHAN */
+                                        <0x35>, /* ICSSG_0_RX_CHAN */
+                                        <0x37>; /* ICSSG_1_RX_CHAN */
+                ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+                                        <0x2c>, /* FLOW_CPSW_RX_CHAN */
+                                        <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+                                        <0x32>, /* FLOW_SAUL_RX_2/3_CHAN */
+                                        <0x36>, /* FLOW_ICSSG_0_RX_CHAN */
+                                        <0x38>; /* FLOW_ICSSG_1_RX_CHAN */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
new file mode 100644
index 0000000000..22f6c5e2f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 NAVSS Unified DMA
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The UDMA-P is intended to perform similar (but significantly upgraded)
+  functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P
+  module supports the transmission and reception of various packet types.
+  The UDMA-P architecture facilitates the segmentation and reassembly of SoC DMA
+  data structure compliant packets to/from smaller data blocks that are natively
+  compatible with the specific requirements of each connected peripheral.
+  Multiple Tx and Rx channels are provided within the DMA which allow multiple
+  segmentation or reassembly operations to be ongoing. The DMA controller
+  maintains state information for each of the channels which allows packet
+  segmentation and reassembly operations to be time division multiplexed between
+  channels in order to share the underlying DMA hardware. An external DMA
+  scheduler is used to control the ordering and rate at which this multiplexing
+  occurs for Transmit operations. The ordering and rate of Receive operations
+  is indirectly controlled by the order in which blocks are pushed into the DMA
+  on the Rx PSI-L interface.
+
+  The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
+  channels. Channels in the UDMA-P can be configured to be either Packet-Based
+  or Third-Party channels on a channel by channel basis.
+
+  All transfers within NAVSS is done between PSI-L source and destination
+  threads.
+  The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or
+  legacy, non PSI-L native peripherals. In the later case a special, small PDMA
+  is tasked to act as a bridge between the PSI-L fabric and the legacy
+  peripheral.
+
+  PDMAs can be configured via UDMAP peer registers to match with the
+  configuration of the legacy peripheral.
+
+allOf:
+  - $ref: ../dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  "#dma-cells":
+    minimum: 1
+    maximum: 2
+    description: |
+      The cell is the PSI-L  thread ID of the remote (to UDMAP) end.
+      Valid ranges for thread ID depends on the data movement direction:
+      for source thread IDs (rx): 0 - 0x7fff
+      for destination thread IDs (tx): 0x8000 - 0xffff
+
+      Please refer to the device documentation for the PSI-L thread map and also
+      the PSI-L peripheral chapter for the correct thread ID.
+
+      When #dma-cells is 2, the second parameter is the channel ATYPE.
+
+  compatible:
+    enum:
+      - ti,am654-navss-main-udmap
+      - ti,am654-navss-mcu-udmap
+      - ti,j721e-navss-main-udmap
+      - ti,j721e-navss-mcu-udmap
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: gcfg
+      - const: rchanrt
+      - const: tchanrt
+
+  msi-parent: true
+
+  ti,ringacc:
+    description: phandle to the ring accelerator node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,sci-rm-range-tchan:
+    description: |
+      Array of UDMA tchan resource subtypes for resource allocation for this
+      host
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+  ti,sci-rm-range-rchan:
+    description: |
+      Array of UDMA rchan resource subtypes for resource allocation for this
+      host
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+  ti,sci-rm-range-rflow:
+    description: |
+      Array of UDMA rflow resource subtypes for resource allocation for this
+      host
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,ringacc
+  - ti,sci-rm-range-tchan
+  - ti,sci-rm-range-rchan
+  - ti,sci-rm-range-rflow
+
+if:
+  properties:
+    "#dma-cells":
+      const: 2
+then:
+  properties:
+    ti,udma-atype:
+      description: ATYPE value which should be used by non slave channels
+      $ref: /schemas/types.yaml#/definitions/uint32
+
+  required:
+    - ti,udma-atype
+
+unevaluatedProperties: false
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cbass_main_navss: navss@30800000 {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-coherent;
+            dma-ranges;
+            ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
+
+            ti,sci-dev-id = <118>;
+
+            main_udmap: dma-controller@31150000 {
+                compatible = "ti,am654-navss-main-udmap";
+                reg = <0x0 0x31150000 0x0 0x100>,
+                      <0x0 0x34000000 0x0 0x100000>,
+                      <0x0 0x35000000 0x0 0x100000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt";
+                #dma-cells = <1>;
+
+                ti,ringacc = <&ringacc>;
+
+                msi-parent = <&inta_main_udmass>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <188>;
+
+                ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+                                        <0x2>; /* TX_CHAN */
+                ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+                                        <0x5>; /* RX_CHAN */
+                ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
new file mode 100644
index 0000000000..590d1948f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -0,0 +1,134 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
+Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream
+target devices. It can be configured to have up to 16 independent transmit
+and receive channels.
+
+Required properties:
+- compatible: Should be one of-
+		"xlnx,axi-vdma-1.00.a"
+		"xlnx,axi-dma-1.00.a"
+		"xlnx,axi-cdma-1.00.a"
+		"xlnx,axi-mcdma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain VDMA registers location and length.
+- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
+- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
+- dma-channel child node: Should have at least one channel and can have up to
+	two channels per device. This node specifies the properties of each
+	DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+	For VDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+	For CDMA:
+	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+	For AXIDMA and MCDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+			   "m_axi_sg_aclk"
+
+Required properties for VDMA:
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+
+Optional properties for AXI DMA and MCDMA:
+- xlnx,sg-length-width: Should be set to the width in bits of the length
+	register as configured in h/w. Takes values {8...26}. If the property
+	is missing or invalid then the default value 23 is used. This is the
+	maximum value that is supported by all IP versions.
+
+Optional properties for AXI DMA:
+- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP.
+- xlnx,irq-delay: Tells the interrupt delay timeout value. Valid range is from
+	0-255. Setting this value to zero disables the delay timer interrupt.
+	1 timeout interval = 125 * clock period of SG clock.
+Optional properties for VDMA:
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+	It takes following values:
+	{1}, flush both channels
+	{2}, flush mm2s channel
+	{3}, flush s2mm channel
+
+Required child node properties:
+- compatible:
+	For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
+	"xlnx,axi-vdma-s2mm-channel".
+	For CDMA: It should be "xlnx,axi-cdma-channel".
+	For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel"
+	or "xlnx,axi-dma-s2mm-channel".
+- interrupts: Should contain per channel VDMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+	{32,64...1024}.
+
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
+	Realignment Engine.
+Optional child node properties for VDMA:
+- xlnx,genlock-mode: Tells Genlock synchronization is
+	enabled/disabled in hardware.
+- xlnx,enable-vert-flip: Tells vertical flip is
+	enabled/disabled in hardware(S2MM path).
+Optional child node properties for MCDMA:
+- dma-channels: Number of dma channels in child node.
+
+Example:
+++++++++
+
+axi_vdma_0: axivdma@40030000 {
+	compatible = "xlnx,axi-vdma-1.00.a";
+	#dma_cells = <1>;
+	reg = < 0x40030000 0x10000 >;
+	dma-ranges = <0x00000000 0x00000000 0x40000000>;
+	xlnx,num-fstores = <0x8>;
+	xlnx,flush-fsync = <0x1>;
+	xlnx,addrwidth = <0x20>;
+	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
+	dma-channel@40030000 {
+		compatible = "xlnx,axi-vdma-mm2s-channel";
+		interrupts = < 0 54 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+	dma-channel@40030030 {
+		compatible = "xlnx,axi-vdma-s2mm-channel";
+		interrupts = < 0 53 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
+	where Channel ID is '0' for write/tx and '1' for read/rx
+	channel. For MCMDA, MM2S channel(write/tx) ID start from
+	'0' and is in [0-15] range. S2MM channel(read/rx) ID start
+	from '16' and is in [16-31] range. These channels ID are
+	fixed irrespective of IP configuration.
+
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+vdmatest_0: vdmatest@0 {
+	compatible ="xlnx,axi-vdma-test-1.00.a";
+	dmas = <&axi_vdma_0 0
+		&axi_vdma_0 1>;
+	dma-names = "vdma0", "vdma1";
+} ;
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
new file mode 100644
index 0000000000..769ce23aaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DMA Engine
+
+description: |
+  The Xilinx ZynqMP DMA engine supports memory to memory transfers,
+  memory to device and device to memory transfers. It also has flow
+  control and rate control support for slave/peripheral dma access.
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Harini Katakam <harini.katakam@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+
+allOf:
+  - $ref: ../dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 1
+
+  compatible:
+    const: xlnx,zynqmp-dma-1.0
+
+  reg:
+    description: memory map for gdma/adma module access
+    maxItems: 1
+
+  interrupts:
+    description: DMA channel interrupt
+    maxItems: 1
+
+  clocks:
+    description: input clocks
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_main
+      - const: clk_apb
+
+  xlnx,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 64
+      - 128
+    description: AXI bus width in bits
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dma-coherent:
+    description: present if dma operations are coherent
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - xlnx,bus-width
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    fpd_dma_chan1: dma-controller@fd500000 {
+      compatible = "xlnx,zynqmp-dma-1.0";
+      reg = <0xfd500000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <0 117 0x4>;
+      #dma-cells = <1>;
+      clock-names = "clk_main", "clk_apb";
+      clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+      xlnx,bus-width = <128>;
+      dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
new file mode 100644
index 0000000000..2128f4645c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort DMA Controller
+
+description: |
+  These bindings describe the DMA engine included in the Xilinx ZynqMP
+  DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3
+  channels for a video stream, 1 channel for a graphics stream, and 2 channels
+  for an audio stream).
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: ../dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: |
+      The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h
+      for a list of channel IDs).
+
+  compatible:
+    const: xlnx,zynqmp-dpdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The AXI clock
+    maxItems: 1
+
+  clock-names:
+    const: axi_clk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+    dma: dma-controller@fd4c0000 {
+      compatible = "xlnx,zynqmp-dpdma";
+      reg = <0xfd4c0000 0x1000>;
+      interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-parent = <&gic>;
+      clocks = <&dpdma_clk>;
+      clock-names = "axi_clk";
+      #dma-cells = <1>;
+      power-domains = <&zynqmp_firmware PD_DP>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
new file mode 100644
index 0000000000..9af40da568
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/fsl,dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DSP core
+
+maintainers:
+  - Daniel Baluta <daniel.baluta@nxp.com>
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  Some boards from i.MX8 family contain a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-dsp
+      - fsl,imx8qm-dsp
+      - fsl,imx8mp-dsp
+      - fsl,imx8ulp-dsp
+      - fsl,imx8qxp-hifi4
+      - fsl,imx8qm-hifi4
+      - fsl,imx8mp-hifi4
+      - fsl,imx8ulp-hifi4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ipg clock
+      - description: ocram clock
+      - description: core clock
+      - description: debug interface clock
+      - description: message unit clock
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ocram
+      - const: core
+      - const: debug
+      - const: mu
+    minItems: 3
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    minItems: 1
+    maxItems: 4
+
+  mboxes:
+    description:
+      List of <&phandle type channel> - 2 channels for TXDB, 2 channels for RXDB
+      or - 1 channel for TX, 1 channel for RX, 1 channel for RXDB
+      (see mailbox/fsl,mu.txt)
+    minItems: 3
+    maxItems: 4
+
+  mbox-names:
+    minItems: 3
+    maxItems: 4
+
+  memory-region:
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      used by DSP (see bindings/reserved-memory/reserved-memory.txt)
+    minItems: 1
+    maxItems: 4
+
+  firmware-name:
+    description: |
+      Default name of the firmware to load to the remote processor.
+
+  fsl,dsp-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access for processor enablement
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - mboxes
+  - mbox-names
+  - memory-region
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-dsp
+              - fsl,imx8qm-dsp
+              - fsl,imx8qxp-hifi4
+              - fsl,imx8qm-hifi4
+    then:
+      properties:
+        power-domains:
+          minItems: 4
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-hifi4
+              - fsl,imx8qm-hifi4
+              - fsl,imx8mp-hifi4
+              - fsl,imx8ulp-hifi4
+    then:
+      properties:
+        memory-region:
+          minItems: 4
+        mboxes:
+          maxItems: 3
+        mbox-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: rxdb
+    else:
+      properties:
+        memory-region:
+          maxItems: 1
+        mboxes:
+          minItems: 4
+        mbox-names:
+          items:
+            - const: txdb0
+            - const: txdb1
+            - const: rxdb0
+            - const: rxdb1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    dsp@596e8000 {
+        compatible = "fsl,imx8qxp-dsp";
+        reg = <0x596e8000 0x88000>;
+        clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>,
+                 <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
+                 <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
+        clock-names = "ipg", "ocram", "core";
+        power-domains = <&pd IMX_SC_R_MU_13A>,
+                        <&pd IMX_SC_R_MU_13B>,
+                        <&pd IMX_SC_R_DSP>,
+                        <&pd IMX_SC_R_DSP_RAM>;
+        mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+        mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
+        memory-region = <&dsp_reserved>;
+    };
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    dsp_reserved: dsp@92400000 {
+      reg = <0x92400000 0x1000000>;
+      no-map;
+    };
+    dsp_vdev0vring0: vdev0vring0@942f0000 {
+      reg = <0x942f0000 0x8000>;
+      no-map;
+    };
+    dsp_vdev0vring1: vdev0vring1@942f8000 {
+      reg = <0x942f8000 0x8000>;
+      no-map;
+    };
+    dsp_vdev0buffer: vdev0buffer@94300000 {
+      compatible = "shared-dma-pool";
+      reg = <0x94300000 0x100000>;
+      no-map;
+    };
+
+    dsp: dsp@3b6e8000 {
+      compatible = "fsl,imx8mp-hifi4";
+      reg = <0x3b6e8000 0x88000>;
+      clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+      clock-names = "ipg", "ocram", "core", "debug";
+      firmware-name = "imx/dsp/hifi4.bin";
+      power-domains = <&audiomix_pd>;
+      mbox-names = "tx", "rx", "rxdb";
+      mboxes = <&mu2 0 0>,
+               <&mu2 1 0>,
+               <&mu2 3 0>;
+      memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+                      <&dsp_vdev0vring1>, <&dsp_reserved>;
+      fsl,dsp-ctrl = <&audio_blk_ctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 0000000000..88575da1e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-dsp
+      - mediatek,mt8188-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
new file mode 100644
index 0000000000..ca8d8661f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mt8195 DSP core
+
+maintainers:
+  - YC Hung <yc.hung@mediatek.com>
+
+description: |
+  Some boards from mt8195 contain a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP Cfg registers
+      - description: Address and size of the DSP SRAM
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: 26M clock
+      - description: mux for audio dsp local bus
+      - description: default audio dsp local bus clock source
+      - description: clock gate for audio dsp clock
+      - description: mux for audio dsp access external bus
+
+  clock-names:
+    items:
+      - const: adsp_sel
+      - const: clk26m_ck
+      - const: audio_local_bus
+      - const: mainpll_d7_d2
+      - const: scp_adsp_audiodsp
+      - const: audio_h
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - memory-region
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dsp@10803000 {
+       compatible =  "mediatek,mt8195-dsp";
+       reg = <0x10803000  0x1000>,
+             <0x10840000  0x40000>;
+       reg-names = "cfg", "sram";
+       clocks = <&topckgen 10>, //CLK_TOP_ADSP
+                <&clk26m>,
+                <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
+                <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
+                <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
+                <&topckgen 34>; //CLK_TOP_AUDIO_H
+       clock-names = "adsp_sel",
+                     "clk26m_ck",
+                     "audio_local_bus",
+                     "mainpll_d7_d2",
+                     "scp_adsp_audiodsp",
+                     "audio_h";
+       memory-region = <&adsp_dma_mem_reserved>,
+                       <&adsp_mem_reserved>;
+       power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
+       mbox-names = "rx", "tx";
+       mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
new file mode 100644
index 0000000000..cc930660b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dvfs/performance-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic performance domains
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |+
+  This binding is intended for performance management of groups of devices or
+  CPUs that run in the same performance domain. Performance domains must not
+  be confused with power domains. A performance domain is defined by a set
+  of devices that always have to run at the same performance level. For a given
+  performance domain, there is a single point of control that affects all the
+  devices in the domain, making it impossible to set the performance level of
+  an individual device in the domain independently from other devices in
+  that domain. For example, a set of CPUs that share a voltage domain, and
+  have a common frequency control, is said to be in the same performance
+  domain.
+
+  This device tree binding can be used to bind performance domain consumer
+  devices with their performance domains provided by performance domain
+  providers. A performance domain provider can be represented by any node in
+  the device tree and can provide one or more performance domains. A consumer
+  node can refer to the provider by a phandle and a set of phandle arguments
+  (so called performance domain specifiers) of length specified by the
+  \#performance-domain-cells property in the performance domain provider node.
+
+select: true
+
+properties:
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier. Typically 0 for nodes
+      representing a single performance domain and 1 for nodes providing
+      multiple performance domains (e.g. performance controllers), but can be
+      any value as specified by device tree binding documentation of particular
+      provider.
+    enum: [ 0, 1 ]
+
+  performance-domains:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      A phandle and performance domain specifier as defined by bindings of the
+      performance controller/provider specified by phandle.
+
+additionalProperties: true
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
+    };
+
+    // The node above defines a performance controller that is a performance
+    // domain provider and expects one cell as its phandle argument.
+
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            performance-domains = <&performance 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
new file mode 100644
index 0000000000..4cfc3a1870
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/amazon,al-mc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon's Annapurna Labs Memory Controller EDAC
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+  - Talel Shenhar <talelshenhar@gmail.com>
+
+description: |
+  EDAC node is defined to describe on-chip error detection and correction for
+  Amazon's Annapurna Labs Memory Controller.
+
+properties:
+
+  compatible:
+    const: amazon,al-mc-edac
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: uncorrectable error interrupt
+      - description: correctable error interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ue
+      - const: ce
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        edac@f0080000 {
+          #address-cells = <2>;
+          #size-cells = <2>;
+          compatible = "amazon,al-mc-edac";
+          reg = <0x0 0xf0080000 0x0 0x00010000>;
+          interrupt-parent = <&amazon_al_system_fabric>;
+          interrupt-names = "ue";
+          interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
new file mode 100644
index 0000000000..1006b04894
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC EDAC node
+
+EDAC node is defined to describe on-chip error detection and correction.
+The follow error types are supported:
+
+  memory controller	- Memory controller
+  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
+  L3			- L3 cache controller
+  SoC			- SoC IP's such as Ethernet, SATA, and etc
+
+The following section describes the EDAC DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-edac".
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+- regmap-efuse		: Regmap of the PMD efuse resource.
+- regmap-rb		: Regmap of the register bus resource. This property
+			  is optional only for compatibility. If the RB
+			  error conditions are not cleared, it will
+			  continuously generate interrupt.
+- reg			: First resource shall be the CPU bus (PCP) resource.
+- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
+			  IRQ(s).
+
+Required properties for memory controller subnode:
+- compatible		: Shall be "apm,xgene-edac-mc".
+- reg			: First resource shall be the memory controller unit
+                          (MCU) resource.
+- memory-controller	: Instance number of the memory controller.
+
+Required properties for PMD subnode:
+- compatible		: Shall be "apm,xgene-edac-pmd" or
+                          "apm,xgene-edac-pmd-v2".
+- reg			: First resource shall be the PMD resource.
+- pmd-controller	: Instance number of the PMD controller.
+
+Required properties for L3 subnode:
+- compatible		: Shall be "apm,xgene-edac-l3" or
+                          "apm,xgene-edac-l3-v2".
+- reg			: First resource shall be the L3 EDAC resource.
+
+Required properties for SoC subnode:
+- compatible		: Shall be "apm,xgene-edac-soc-v1" for revision 1 or
+                          "apm,xgene-edac-l3-soc" for general value reporting
+                          only.
+- reg			: First resource shall be the SoC EDAC resource.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "apm,xgene-csw", "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	efuse: efuse@1054a000 {
+		compatible = "apm,xgene-efuse", "syscon";
+		reg = <0x0 0x1054a000 0x0 0x20>;
+	};
+
+	rb: rb@7e000000 {
+		compatible = "apm,xgene-rb", "syscon";
+		reg = <0x0 0x7e000000 0x0 0x10>;
+	};
+
+	edac@78800000 {
+		compatible = "apm,xgene-edac";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		regmap-csw = <&csw>;
+		regmap-mcba = <&mcba>;
+		regmap-mcbb = <&mcbb>;
+		regmap-efuse = <&efuse>;
+		regmap-rb = <&rb>;
+		reg = <0x0 0x78800000 0x0 0x100>;
+		interrupts = <0x0 0x20 0x4>,
+			     <0x0 0x21 0x4>,
+			     <0x0 0x27 0x4>;
+
+		edacmc@7e800000 {
+			compatible = "apm,xgene-edac-mc";
+			reg = <0x0 0x7e800000 0x0 0x1000>;
+			memory-controller = <0>;
+		};
+
+		edacpmd@7c000000 {
+			compatible = "apm,xgene-edac-pmd";
+			reg = <0x0 0x7c000000 0x0 0x200000>;
+			pmd-controller = <0>;
+		};
+
+		edacl3@7e600000 {
+			compatible = "apm,xgene-edac-l3";
+			reg = <0x0 0x7e600000 0x0 0x1000>;
+		};
+
+		edacsoc@7e930000 {
+			compatible = "apm,xgene-edac-soc-v1";
+			reg = <0x0 0x7e930000 0x0 0x1000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
new file mode 100644
index 0000000000..8ca9e0a049
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -0,0 +1,28 @@
+Aspeed BMC SoC EDAC node
+
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
+correction check).
+
+The memory controller supports SECDED (single bit error correction, double bit
+error detection) and single bit error auto scrubbing by reserving 8 bits for
+every 64 bit word (effectively reducing available memory to 8/9).
+
+Note, the bootloader must configure ECC mode in the memory controller.
+
+
+Required properties:
+- compatible: should be one of
+	- "aspeed,ast2400-sdram-edac"
+	- "aspeed,ast2500-sdram-edac"
+	- "aspeed,ast2600-sdram-edac"
+- reg:        sdram controller register set should be <0x1e6e0000 0x174>
+- interrupts: should be AVIC interrupt #0
+
+
+Example:
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml
new file mode 100644
index 0000000000..84db396666
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/dmc-520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DMC-520 EDAC
+
+maintainers:
+  - Lei Wang <lewan@microsoft.com>
+
+description: |+
+  DMC-520 node is defined to describe DRAM error detection and correction.
+
+  https://static.docs.arm.com/100000/0200/corelink_dmc520_trm_100000_0200_01_en.pdf
+
+properties:
+  compatible:
+    items:
+      - const: brcm,dmc-520
+      - const: arm,dmc-520
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 10
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      enum:
+        - ram_ecc_errc
+        - ram_ecc_errd
+        - dram_ecc_errc
+        - dram_ecc_errd
+        - failed_access
+        - failed_prog
+        - link_err
+        - temperature_event
+        - arch_fsm
+        - phy_request
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dmc0: dmc@200000 {
+        compatible = "brcm,dmc-520", "arm,dmc-520";
+        reg = <0x200000 0x80000>;
+        interrupts = <0x0 0x349 0x4>, <0x0 0x34B 0x4>;
+        interrupt-names = "dram_ecc_errc", "dram_ecc_errd";
+    };
diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
new file mode 100644
index 0000000000..8f52206cfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
@@ -0,0 +1,383 @@
+Altera SoCFPGA ECC Manager
+This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
+The ECC Manager counts and corrects single bit errors and counts/handles
+double bit errors which are uncorrectable.
+
+Cyclone5 and Arria5 ECC Manager
+Required Properties:
+- compatible : Should be "altr,socfpga-ecc-manager"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+
+On Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-ocram-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- iram : phandle to On-Chip RAM definition.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+
+Example:
+
+	eccmgr: eccmgr@ffd08140 {
+		compatible = "altr,socfpga-ecc-manager";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		l2-ecc@ffd08140 {
+			compatible = "altr,socfpga-l2-ecc";
+			reg = <0xffd08140 0x4>;
+			interrupts = <0 36 1>, <0 37 1>;
+		};
+
+		ocram-ecc@ffd08144 {
+			compatible = "altr,socfpga-ocram-ecc";
+			reg = <0xffd08144 0x4>;
+			iram = <&ocram>;
+			interrupts = <0 178 1>, <0 179 1>;
+		};
+	};
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+	containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg        : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+QSPI FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-qspi-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order for port A, and then single bit error interrupt,
+	then double bit error interrupt in this order for port B.
+
+Example:
+
+	eccmgr: eccmgr@ffd06000 {
+		compatible = "altr,socfpga-a10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ranges;
+
+		l2-ecc@ffd06010 {
+			compatible = "altr,socfpga-a10-l2-ecc";
+			reg = <0xffd06010 0x4>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+				     <32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram-ecc@ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+				     <33 IRQ_TYPE_LEVEL_HIGH> ;
+		};
+
+		emac0-rx-ecc@ff8c0800 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0800 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+				     <36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0c00 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0c00 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+				     <37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-buf-ecc@ff8c2000 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2000 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
+				     <43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c2400 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2400 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
+				     <45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c2800 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2800 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+				     <44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c8000 {
+			compatible = "altr,socfpga-dma-ecc";
+			reg = <0xff8c8000 0x400>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+				     <42 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c8800 {
+			compatible = "altr,socfpga-usb-ecc";
+			reg = <0xff8c8800 0x400>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+				     <34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi-ecc@ff8c8400 {
+			compatible = "altr,socfpga-qspi-ecc";
+			reg = <0xff8c8400 0x400>;
+			altr,ecc-parent = <&qspi>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c2c00 {
+			compatible = "altr,socfpga-sdmmc-ecc";
+			reg = <0xff8c2c00 0x400>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+				     <47 IRQ_TYPE_LEVEL_HIGH>,
+				     <16 IRQ_TYPE_LEVEL_HIGH>,
+				     <48 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+Stratix10 SoCFPGA ECC Manager (ARM64)
+The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register similar to the Arria10. However, Stratix10 ECC
+requires access to registers that can only be read from Secure Monitor
+with SMC calls. Therefore the device tree is slightly different. Note
+that only 1 interrupt is sent in Stratix10 because the double bit errors
+are treated as SErrors in ARM64 instead of IRQs in ARM32.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-ecc-manager"
+- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
+	              containing the ECC manager registers.
+- interrupts : Should be single bit error interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+SDRAM ECC
+Required Properties:
+- compatible : Should be "altr,sdram-edac-s10"
+- interrupts : Should be single bit error interrupt.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-ocram-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent OCRAM node.
+- interrupts      : Should be single bit error interrupt.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt.
+
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt for port A
+		    and then single bit error interrupt for port B.
+
+Example:
+
+	eccmgr {
+		compatible = "altr,socfpga-s10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 15 4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ranges;
+
+		sdramedac {
+			compatible = "altr,sdram-edac-s10";
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram-ecc@ff8cc000 {
+			compatible = "altr,socfpga-s10-ocram-ecc";
+			reg = <ff8cc000 0x100>;
+			altr,ecc-parent = <&ocram>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-rx-ecc@ff8c0000 {
+			compatible = "altr,socfpga-s10-eth-mac-ecc";
+			reg = <0xff8c0000 0x100>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0400 {
+			compatible = "altr,socfpga-s10-eth-mac-ecc";
+			reg = <0xff8c0400 0x100>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
+		};
+
+		nand-buf-ecc@ff8c8000 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8000 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c8400 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8400 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c8800 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8800 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c9000 {
+			compatible = "altr,socfpga-s10-dma-ecc";
+			reg = <0xff8c9000 0x100>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c4000 {
+			compatible = "altr,socfpga-s10-usb-ecc";
+			reg = <0xff8c4000 0x100>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c8c00 {
+			compatible = "altr,socfpga-s10-sdmmc-ecc";
+			reg = <0xff8c8c00 0x100>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <15 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
new file mode 100644
index 0000000000..98139489d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2019 BayLibre SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/at24.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C EEPROMs compatible with Atmel's AT24
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^eeprom@[0-9a-f]{1,2}$"
+
+  # There are multiple known vendors who manufacture EEPROM chips compatible
+  # with Atmel's AT24. The compatible string requires either a single item
+  # if the memory comes from Atmel (in which case the vendor part must be
+  # 'atmel') or two items with the same 'model' part where the vendor part of
+  # the first one is the actual manufacturer and the second item is the
+  # corresponding 'atmel,<model>' from Atmel.
+  compatible:
+    oneOf:
+      - allOf:
+          - minItems: 1
+            items:
+              - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$"
+              - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+          - oneOf:
+              - items:
+                  pattern: c00$
+              - items:
+                  pattern: c01$
+              - items:
+                  pattern: cs01$
+              - items:
+                  pattern: c02$
+              - items:
+                  pattern: cs02$
+              - items:
+                  pattern: mac402$
+              - items:
+                  pattern: mac602$
+              - items:
+                  pattern: c04$
+              - items:
+                  pattern: cs04$
+              - items:
+                  pattern: c08$
+              - items:
+                  pattern: cs08$
+              - items:
+                  pattern: c16$
+              - items:
+                  pattern: cs16$
+              - items:
+                  pattern: c32$
+              - items:
+                  pattern: cs32$
+              - items:
+                  pattern: c64$
+              - items:
+                  pattern: cs64$
+              - items:
+                  pattern: c128$
+              - items:
+                  pattern: cs128$
+              - items:
+                  pattern: c256$
+              - items:
+                  pattern: cs256$
+              - items:
+                  pattern: c512$
+              - items:
+                  pattern: cs512$
+              - items:
+                  pattern: c1024$
+              - items:
+                  pattern: cs1024$
+              - items:
+                  pattern: c1025$
+              - items:
+                  pattern: cs1025$
+              - items:
+                  pattern: c2048$
+              - items:
+                  pattern: cs2048$
+              - items:
+                  pattern: spd$
+      # These are special cases that don't conform to the above pattern.
+      # Each requires a standard at24 model as fallback.
+      - items:
+          - const: belling,bl24c16a
+          - const: atmel,24c16
+      - items:
+          - enum:
+              - rohm,br24g01
+              - rohm,br24t01
+          - const: atmel,24c01
+      - items:
+          - enum:
+              - nxp,se97b
+              - renesas,r1ex24002
+          - const: atmel,24c02
+      - items:
+          - enum:
+              - onnn,cat24c04
+              - onnn,cat24c05
+          - const: atmel,24c04
+      - items:
+          - const: renesas,r1ex24016
+          - const: atmel,24c16
+      - items:
+          - const: giantec,gt24c32a
+          - const: atmel,24c32
+      - items:
+          - enum:
+              - renesas,r1ex24128
+              - samsung,s524ad0xd1
+          - const: atmel,24c128
+
+  label:
+    description: Descriptive name of the EEPROM.
+
+  reg:
+    maxItems: 1
+
+  pagesize:
+    description:
+      The length of the pagesize for writing. Please consult the
+      manual of your device, that value varies a lot. A wrong value
+      may result in data loss! If not specified, a safety value of
+      '1' is used which will be very slow.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 256]
+    default: 1
+
+  read-only:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Disables writes to the eeprom.
+
+  size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes.
+
+  no-read-rollover:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the multi-address eeprom does not automatically roll
+      over reads to the next slave address. Please consult the manual of
+      your device.
+
+  wp-gpios: true
+
+  address-width:
+    description:
+      Number of address bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    enum: [ 8, 16 ]
+
+  num-addresses:
+    description:
+      Total number of i2c slave addresses this device takes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    minimum: 1
+    maximum: 8
+
+  vcc-supply:
+    description:
+      phandle of the regulator that provides the supply voltage.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@52 {
+          compatible = "microchip,24c32", "atmel,24c32";
+          reg = <0x52>;
+          pagesize = <32>;
+          wp-gpios = <&gpio1 3 0>;
+          num-addresses = <8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
new file mode 100644
index 0000000000..1715b0c9fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/at25.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI EEPROMs or FRAMs compatible with Atmel's AT25
+
+maintainers:
+  - Christian Eggers <ceggers@arri.de>
+
+properties:
+  $nodename:
+    anyOf:
+      - pattern: "^eeprom@[0-9a-f]{1,2}$"
+      - pattern: "^fram@[0-9a-f]{1,2}$"
+
+  # There are multiple known vendors who manufacture EEPROM chips compatible
+  # with Atmel's AT25. The compatible string requires two items where the
+  # 'vendor' and 'model' parts of the first are the actual chip and the second
+  # item is fixed to "atmel,at25". Some existing bindings only have the
+  # "atmel,at25" part and should be fixed by somebody who knows vendor and
+  # product.
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - anvo,anv32e61w
+              - atmel,at25256B
+              - fujitsu,mb85rs1mt
+              - fujitsu,mb85rs64
+              - microchip,at25160bn
+              - microchip,25lc040
+              - st,m95m02
+              - st,m95256
+              - st,m95640
+              - cypress,fm25
+
+          - const: atmel,at25
+
+      # Please don't use this alternative for new bindings.
+      - items:
+          - const: atmel,at25
+
+  reg:
+    maxItems: 1
+
+  pagesize:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
+    description:
+      Size of the eeprom page. FRAMs don't have pages.
+
+  size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes.
+
+  address-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 9, 16, 24 ]
+    description:
+      Number of address bits.
+      For 9 bits, the MSB of the address is sent as bit 3 of the instruction
+      byte, before the address byte.
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  read-only:
+    description:
+      Disable writes to the eeprom.
+    type: boolean
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+
+  # Deprecated: at25,byte-len, at25,addr-mode, at25,page-size
+  at25,byte-len:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total eeprom size in bytes. Deprecated, use "size" property instead.
+    deprecated: true
+
+  at25,addr-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Addr-mode flags, as defined in include/linux/spi/eeprom.h.
+      Deprecated, use "address-width" property instead.
+    deprecated: true
+
+  at25,page-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the eeprom page. Deprecated, use "pagesize" property instead.
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: cypress,fm25
+    then:
+      required:
+        - pagesize
+        - size
+        - address-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@0 {
+            compatible = "st,m95256", "atmel,at25";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            spi-cpol;
+            wp-gpios = <&gpio1 3 0>;
+
+            pagesize = <64>;
+            size = <32768>;
+            address-width = <16>;
+        };
+
+        fram@1 {
+            compatible = "cypress,fm25", "atmel,at25";
+            reg = <1>;
+            spi-max-frequency = <40000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
new file mode 100644
index 0000000000..144e86ce5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family
+
+maintainers:
+  - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at93c46
+      - atmel,at93c46d
+      - atmel,at93c56
+      - atmel,at93c66
+      - eeprom-93xx46
+      - microchip,93lc46b
+
+  data-size:
+    description: number of data bits per word
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  reg:
+    description: chip select of EEPROM
+    maxItems: 1
+
+  read-only:
+    description:
+      parameter-less property which disables writes to the EEPROM
+    type: boolean
+
+  select-gpios:
+    description:
+      specifies the GPIO that needs to be asserted prior to each access
+      of EEPROM (e.g. for SPI bus multiplexing)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - data-size
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
new file mode 100644
index 0000000000..a41f9b9a19
--- /dev/null
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -0,0 +1,265 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+# All the top-level keys are standard json-schema keywords except for
+# 'maintainers' and 'select'
+
+# $id is a unique identifier based on the filename. There may or may not be a
+# file present at the URL.
+$id: http://devicetree.org/schemas/example-schema.yaml#
+# $schema is the meta-schema this schema should be validated with.
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: An Example Device
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  A more detailed multi-line description of the binding.
+
+  Details about the hardware device and any links to datasheets can go here.
+
+  Literal blocks are marked with the '|' at the beginning. The end is marked by
+  indentation less than the first line of the literal block. Lines also cannot
+  begin with a tab character.
+
+select: false
+  # 'select' is a schema applied to a DT node to determine if this binding
+  # schema should be applied to the node. It is optional and by default the
+  # possible compatible strings are extracted and used to match.
+
+  # In this case, a 'false' schema will never match.
+
+properties:
+  # A dictionary of DT properties for this binding schema
+  compatible:
+    # More complicated schema can use oneOf (XOR), anyOf (OR), or allOf (AND)
+    # to handle different conditions.
+    # In this case, it's needed to handle a variable number of values as there
+    # isn't another way to express a constraint of the last string value.
+    # The boolean schema must be a list of schemas.
+    oneOf:
+      - items:
+          # items is a list of possible values for the property. The number of
+          # values is determined by the number of elements in the list.
+          # Order in lists is significant, order in dicts is not
+          # Must be one of the 1st enums followed by the 2nd enum
+          #
+          # Each element in items should be 'enum' or 'const'
+          - enum:
+              - vendor,soc4-ip
+              - vendor,soc3-ip
+              - vendor,soc2-ip
+          - const: vendor,soc1-ip
+        # additionalItems being false is implied
+        # minItems/maxItems equal to 2 is implied
+      - items:
+          # 'const' is just a special case of an enum with a single possible value
+          - const: vendor,soc1-ip
+
+  reg:
+    # The core schema already checks that reg values are numbers, so device
+    # specific schema don't need to do those checks.
+    # The description of each element defines the order and implicitly defines
+    # the number of reg entries.
+    items:
+      - description: core registers
+      - description: aux registers
+    # minItems/maxItems equal to 2 is implied
+
+  reg-names:
+    # The core schema enforces this (*-names) is a string array
+    items:
+      - const: core
+      - const: aux
+
+  clocks:
+    # Cases that have only a single entry just need to express that with maxItems
+    maxItems: 1
+    description: bus clock. A description is only needed for a single item if
+      there's something unique to add.
+      The items should have a fixed order, so pattern matching names are
+      discouraged.
+
+  clock-names:
+    # For single-entry lists in clocks, resets etc., the xxx-names often do not
+    # bring any value, especially if they copy the IP block name.  In such case
+    # just skip the xxx-names.
+    items:
+      - const: bus
+
+  interrupts:
+    # Either 1 or 2 interrupts can be present
+    minItems: 1
+    items:
+      - description: tx or combined interrupt
+      - description: rx interrupt
+    description:
+      A variable number of interrupts warrants a description of what conditions
+      affect the number of interrupts. Otherwise, descriptions on standard
+      properties are not necessary.
+      The items should have a fixed order, so pattern matching names are
+      discouraged.
+
+  interrupt-names:
+    # minItems must be specified here because the default would be 2
+    minItems: 1
+    items:
+      - const: tx irq
+      - const: rx irq
+
+  # Property names starting with '#' must be quoted
+  '#interrupt-cells':
+    # A simple case where the value must always be '2'.
+    # The core schema handles that this must be a single integer.
+    const: 2
+
+  interrupt-controller: true
+    # The core checks this is a boolean, so just have to list it here to be
+    # valid for this binding.
+
+  clock-frequency:
+    # The type is set in the core schema. Per-device schema only need to set
+    # constraints on the possible values.
+    minimum: 100
+    maximum: 400000
+    # The value that should be used if the property is not present
+    default: 200
+
+  foo-gpios:
+    maxItems: 1
+    description: A connection of the 'foo' gpio line.
+
+  # *-supply is always a single phandle, so nothing more to define.
+  foo-supply: true
+
+  # Vendor-specific properties
+  #
+  # Vendor-specific properties have slightly different schema requirements than
+  # common properties. They must have at least a type definition and
+  # 'description'.
+  vendor,int-property:
+    description: Vendor-specific properties must have a description
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4, 6, 8, 10]
+
+  vendor,bool-property:
+    description: Vendor-specific properties must have a description. Boolean
+      properties are one case where the json-schema 'type' keyword can be used
+      directly.
+    type: boolean
+
+  vendor,string-array-property:
+    description: Vendor-specific properties should reference a type in the
+      core schema.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - enum: [foo, bar]
+      - enum: [baz, boo]
+
+  vendor,property-in-standard-units-microvolt:
+    description: Vendor-specific properties having a standard unit suffix
+      don't need a type.
+    enum: [ 100, 200, 300 ]
+
+  vendor,int-array-variable-length-and-constrained-values:
+    description: Array might define what type of elements might be used (e.g.
+      their range).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
+  child-node:
+    description: Child nodes are just another property from a json-schema
+      perspective.
+    type: object  # DT nodes are json objects
+    # Child nodes also need additionalProperties or unevaluatedProperties
+    additionalProperties: false
+    properties:
+      vendor,a-child-node-property:
+        description: Child node properties have all the same schema
+          requirements.
+        type: boolean
+
+    required:
+      - vendor,a-child-node-property
+
+# Describe the relationship between different properties
+dependencies:
+  # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
+  # is present
+  vendor,bool-property: [ 'vendor,string-array-property' ]
+  # Expressing 2 properties in both orders means all of the set of properties
+  # must be present or none of them.
+  vendor,string-array-property: [ 'vendor,bool-property' ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+# if/then schema can be used to handle conditions on a property affecting
+# another property. A typical case is a specific 'compatible' value changes the
+# constraints on other properties.
+#
+# For multiple 'if' schema, group them under an 'allOf'.
+#
+# If the conditionals become too unweldy, then it may be better to just split
+# the binding into separate schema documents.
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: vendor,soc2-ip
+    then:
+      required:
+        - foo-supply
+    else:
+      # If otherwise the property is not allowed:
+      properties:
+        foo-supply: false
+  # Altering schema depending on presence of properties is usually done by
+  # dependencies (see above), however some adjustments might require if:
+  - if:
+      required:
+        - vendor,bool-property
+    then:
+      properties:
+        vendor,int-property:
+          enum: [2, 4, 6]
+
+# Ideally, the schema should have this line otherwise any other properties
+# present are allowed. There's a few common properties such as 'status' and
+# 'pinctrl-*' which are added automatically by the tooling.
+#
+# This can't be used in cases where another schema is referenced
+# (i.e. allOf: [{$ref: ...}]).
+# If and only if another schema is referenced and arbitrary children nodes can
+# appear, "unevaluatedProperties: false" could be used.  A typical example is
+# an I2C controller where no name pattern matching for children can be added.
+additionalProperties: false
+
+examples:
+  # Examples are now compiled with dtc and validated against the schemas
+  #
+  # Examples have a default #address-cells and #size-cells value of 1. This can
+  # be overridden or an appropriate parent bus node should be shown (such as on
+  # i2c buses).
+  #
+  # Any includes used have to be explicitly included. Use 4-space indentation.
+  - |
+    node@1000 {
+        compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+        reg = <0x1000 0x80>,
+              <0x3000 0x80>;
+        reg-names = "core", "aux";
+        interrupts = <10>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-max3355.txt b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt
new file mode 100644
index 0000000000..f2288ea9eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt
@@ -0,0 +1,21 @@
+Maxim Integrated MAX3355 USB OTG chip
+-------------------------------------
+
+MAX3355 integrates a charge pump and comparators to enable a system with an
+integrated USB OTG dual-role transceiver to function as a USB OTG dual-role
+device.
+
+Required properties:
+- compatible: should be "maxim,max3355";
+- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin
+		    connected to the MAX3355's SHDN# pin;
+- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin
+	    connected to the MAX3355's ID_OUT pin.
+
+Example:
+
+	usb-otg {
+		compatible = "maxim,max3355";
+		maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
new file mode 100644
index 0000000000..f61d5af44a
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -0,0 +1,22 @@
+EXTCON FOR PALMAS/TWL CHIPS
+
+PALMAS USB COMPARATOR
+Required Properties:
+ - compatible: should contain one of:
+   * "ti,palmas-usb-vid".
+   * "ti,twl6035-usb-vid".
+   * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid").
+   * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid").
+
+Optional Properties:
+ - ti,wakeup : To enable the wakeup comparator in probe
+ - ti,enable-id-detection: Perform ID detection. If id-gpio is specified
+		it performs id-detection using GPIO else using OTG core.
+ - ti,enable-vbus-detection: Perform VBUS detection.
+ - id-gpio: gpio for GPIO ID detection. See gpio binding.
+ - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds.
+
+palmas-usb {
+       compatible = "ti,twl6035-usb", "ti,palmas-usb";
+       ti,wakeup;
+};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
new file mode 100644
index 0000000000..d5cfa32ea5
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PTN5150 CC (Configuration Channel) Logic device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+  connector application with CC control logic detection and indication
+  functions.  It is interfaced to the host controller using an I2C interface.
+
+properties:
+  compatible:
+    const: nxp,ptn5150
+
+  int-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      GPIO pin (input) connected to the PTN5150's INTB pin.
+      Use "interrupts" instead.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vbus-gpios:
+    maxItems: 1
+    description:
+      GPIO pin (output) used to control VBUS. If skipped, no such control
+      takes place.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ptn5150@1d {
+            compatible = "nxp,ptn5150";
+            reg = <0x1d>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
+            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
new file mode 100644
index 0000000000..cfcf455ad4
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
@@ -0,0 +1,23 @@
+
+* Richtek RT8973A - Micro USB Switch device
+
+The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A
+is a USB port accessory detector and switch that is optimized to protect low
+voltage system from abnormal high input voltage (up to 28V) and supports high
+speed USB operation. Also, RT8973A support 'auto-configuration' mode.
+If auto-configuration mode is enabled, RT8973A would control internal h/w patch
+for USB D-/D+ switching.
+
+Required properties:
+- compatible: Should be "richtek,rt8973a-muic"
+- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14
+- interrupts: Interrupt specifiers for detection interrupt sources.
+
+Example:
+
+	rt8973a@14 {
+		compatible = "richtek,rt8973a-muic";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		reg = <0x14>;
+	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
new file mode 100644
index 0000000000..dfc14f71e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
@@ -0,0 +1,21 @@
+USB GPIO Extcon device
+
+This is a virtual device used to generate USB cable states from the USB ID pin
+connected to a GPIO pin.
+
+Required properties:
+- compatible: Should be "linux,extcon-usb-gpio"
+
+Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
+- id-gpio: gpio for USB ID pin. See gpio binding.
+- vbus-gpio: gpio for USB VBUS pin.
+
+Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
+	extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+	}
+
+	&omap_dwc3_1 {
+		extcon = <&extcon_usb1>;
+	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
new file mode 100644
index 0000000000..e00c8072ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC USB Type-C cable and accessories detection
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
+  able to detect the state of external accessories such as display adapters
+  or USB devices when said accessories are attached or detached.
+  The node for this device must be under a cros-ec node like google,cros-ec-spi
+  or google,cros-ec-i2c.
+
+properties:
+  compatible:
+    const: google,extcon-usbc-cros-ec
+
+  google,usb-port-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the port id
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - google,usb-port-id
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            interrupts = <44 0>;
+
+            usbc_extcon0: extcon0 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <0>;
+            };
+
+            usbc_extcon1: extcon1 {
+                compatible = "google,extcon-usbc-cros-ec";
+                google,usb-port-id = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
new file mode 100644
index 0000000000..126107dd57
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-tusb320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TUSB320 USB Type-C CC Logic controller
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tusb320
+      - ti,tusb320l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tusb320@61 {
+            compatible = "ti,tusb320";
+            reg = <0x61>;
+            interrupt-parent = <&gpio>;
+            interrupts = <27 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
new file mode 100644
index 0000000000..ef6a246a13
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild Semiconductor FSA880, FSA9480 and compatibles
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The FSA880 and FSA9480 are USB port accessory detectors and switches.
+  The switch is fully controlled using I2C and enables USB data, stereo
+  and mono audio, video, microphone, and UART data to use a common
+  connector port. Compatible switches exist from other manufacturers.
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa880
+      - fcs,fsa9480
+      - ti,tsu6111
+
+  reg:
+    maxItems: 1
+    description: The I2C address for an FSA880 compatible device is
+      usually 0x25.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        usb-switch@25 {
+            compatible = "fcs,fsa880";
+            reg = <0x25>;
+            interrupt-parent = <&gpio>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
new file mode 100644
index 0000000000..55800fb022
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-muic
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - connector
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
new file mode 100644
index 0000000000..6b80518cbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
+
+maintainers:
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+description: |
+  Some Qualcomm PMICs have a "misc" module that can be used to detect when
+  the USB ID pin has been pulled low or high.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,pm8941-misc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    anyOf:
+      - items:
+          - const: usb_id
+          - const: usb_vbus
+      - items:
+          - const: usb_id
+      - items:
+          - const: usb_vbus
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupt-controller;
+            #interrupt-cells = <4>;
+
+            usb_id: usb-detect@900 {
+                    compatible = "qcom,pm8941-misc";
+                    reg = <0x900>;
+                    interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+                    interrupt-names = "usb_id";
+            };
+    };
+
+    usb-controller {
+           extcon = <&usb_id>;
+    };
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
new file mode 100644
index 0000000000..7ef2d9bef7
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+
+description:
+  The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
+  which can detect the state of external accessory when external accessory is
+  attached or detached and button is pressed or released. It is interfaced to
+  the host controller using an I2C interface.
+
+properties:
+  compatible:
+    enum:
+      - siliconmitus,sm5502-muic
+      - siliconmitus,sm5504-muic
+      - siliconmitus,sm5703-muic
+
+  reg:
+    maxItems: 1
+    description: I2C slave address of the device. Usually 0x25 for SM5502
+      and SM5703, 0x14 for SM5504.
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        extcon@25 {
+                compatible = "siliconmitus,sm5502-muic";
+                reg = <0x25>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
new file mode 100644
index 0000000000..351b202d0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a
+  range of analogue I/O.
+
+  This document lists Extcon specific bindings, see the primary binding
+  document ../mfd/arizona.yaml
+
+properties:
+  wlf,hpdet-channel:
+    description:
+      Headphone detection channel.  ARIZONA_ACCDET_MODE_HPL/1 sets the
+      headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
+      to HPDETR.  If this node is not included or if the value is unknown,
+      then headphone detection mode is set to HPDETL.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 2
+
+  wlf,use-jd2:
+    description:
+      Use the additional JD input along with JD1 for dual pin jack detection.
+    type: boolean
+
+  wlf,use-jd2-nopull:
+    description:
+      Internal pull on JD2 is disabled when used for jack detection.
+    type: boolean
+
+  wlf,jd-invert:
+    description:
+      Invert the polarity of the jack detection switch.
+    type: boolean
+
+  wlf,micd-software-compare:
+    description:
+      Use a software comparison to determine mic presence.
+    type: boolean
+
+  wlf,micd-detect-debounce:
+    description:
+      Additional software microphone detection debounce specified in
+      milliseconds.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  wlf,micd-pol-gpio:
+    description:
+      GPIO specifier for the GPIO controlling the headset polarity if one
+      exists.
+    maxItems: 1
+
+  wlf,micd-bias-start-time:
+    description:
+      Time allowed for MICBIAS to startup prior to performing microphone
+      detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 12
+
+  wlf,micd-rate:
+    description:
+      Delay between successive microphone detection measurements, specified
+      as per the ARIZONA_MICD_TIME_XXX defines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 12
+
+  wlf,micd-dbtime:
+    description:
+      Microphone detection hardware debounces specified as the number of
+      measurements to take.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4]
+
+  wlf,micd-timeout-ms:
+    description:
+      Timeout for microphone detection, specified in milliseconds.
+
+  wlf,micd-force-micbias:
+    description:
+      Force MICBIAS continuously on during microphone detection.
+    type: boolean
+
+  wlf,micd-configs:
+    description:
+      Headset polarity configurations (generally used for detection of
+      CTIA / OMTP headsets), the field can be of variable length but
+      should always be a multiple of 3 cells long, each three cell group
+      represents one polarity configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            The first cell defines the accessory detection pin, zero
+            will use MICDET1 and 0x2000 will use MICDET2.
+          enum: [ 0, 0x2000 ]
+        - description:
+            The second cell represents the MICBIAS to be used. Zero
+            will use MICVDD, 1-3 will use MICBIASx.
+          minimum: 0
+          maximum: 3
+        - description:
+            The third cell represents the value of the micd-pol-gpio
+            pin.
+          minimum: 0
+          maximum: 1
+
+  wlf,gpsw:
+    description:
+      Settings for the general purpose switch, set as one of the
+      ARIZONA_GPSW_XXX defines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
new file mode 100644
index 0000000000..8f50e69876
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/amlogic,meson-gxbb-sm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Secure Monitor (SM)
+
+description:
+  In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+  NVMEM, enable JTAG, set USB boot, etc...
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gxbb-sm
+      - items:
+          - const: amlogic,meson-gx-sm
+          - const: amlogic,meson-gxbb-sm
+
+  power-controller:
+    type: object
+    $ref: /schemas/power/amlogic,meson-sec-pwrc.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+        secure-monitor {
+            compatible = "amlogic,meson-gxbb-sm";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
new file mode 100644
index 0000000000..b138f3d23d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -0,0 +1,489 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 ARM Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/arm,scmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Control and Management Interface (SCMI) Message Protocol
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |
+  The SCMI is intended to allow agents such as OSPM to manage various functions
+  that are provided by the hardware platform it is running on, including power
+  and performance functions.
+
+  This binding is intended to define the interface the firmware implementing
+  the SCMI as described in ARM document number ARM DEN 0056 ("ARM System Control
+  and Management Interface Platform Design Document")[0] provide for OSPM in
+  the device tree.
+
+  [0] https://developer.arm.com/documentation/den0056/latest
+
+properties:
+  $nodename:
+    const: scmi
+
+  compatible:
+    oneOf:
+      - description: SCMI compliant firmware with mailbox transport
+        items:
+          - const: arm,scmi
+      - description: SCMI compliant firmware with ARM SMC/HVC transport
+        items:
+          - const: arm,scmi-smc
+      - description: SCMI compliant firmware with ARM SMC/HVC transport
+                     with shmem address(4KB-page, offset) as parameters
+        items:
+          - const: arm,scmi-smc-param
+      - description: SCMI compliant firmware with SCMI Virtio transport.
+                     The virtio transport only supports a single device.
+        items:
+          - const: arm,scmi-virtio
+      - description: SCMI compliant firmware with OP-TEE transport
+        items:
+          - const: linaro,scmi-optee
+
+  interrupts:
+    description:
+      The interrupt that indicates message completion by the platform
+      rather than by the return of the smc call. This should not be used
+      except when the platform requires such behavior.
+    maxItems: 1
+
+  interrupt-names:
+    const: a2p
+
+  mbox-names:
+    description:
+      Specifies the mailboxes used to communicate with SCMI compliant
+      firmware.
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+        minItems: 1
+      - items:
+          - const: tx
+          - const: tx_reply
+          - const: rx
+        minItems: 2
+
+  mboxes:
+    description:
+      List of phandle and mailbox channel specifiers. It should contain
+      exactly one, two or three mailboxes; the first one or two for transmitting
+      messages ("tx") and another optional ("rx") for receiving notifications
+      and delayed responses, if supported by the platform.
+      The number of mailboxes needed for transmitting messages depends on the
+      type of channels exposed by the specific underlying mailbox controller;
+      one single channel descriptor is enough if such channel is bidirectional,
+      while two channel descriptors are needed to represent the SCMI ("tx")
+      channel if the underlying mailbox channels are of unidirectional type.
+      The effective combination in numbers of mboxes and shmem descriptors let
+      the SCMI subsystem determine unambiguosly which type of SCMI channels are
+      made available by the underlying mailbox controller and how to use them.
+       1 mbox / 1 shmem => SCMI TX over 1 mailbox bidirectional channel
+       2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels
+       2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels
+       3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels
+      Any other combination of mboxes and shmem is invalid.
+    minItems: 1
+    maxItems: 3
+
+  shmem:
+    description:
+      List of phandle pointing to the shared memory(SHM) area, for each
+      transport channel specified.
+    minItems: 1
+    maxItems: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  atomic-threshold-us:
+    description:
+      An optional time value, expressed in microseconds, representing, on this
+      platform, the threshold above which any SCMI command, advertised to have
+      an higher-than-threshold execution latency, should not be considered for
+      atomic mode of operation, even if requested.
+    default: 0
+
+  arm,smc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SMC id required when using smc or hvc transports
+
+  linaro,optee-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel specifier required when using OP-TEE transport.
+
+  protocol@11:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x11
+
+      '#power-domain-cells':
+        const: 1
+
+    required:
+      - '#power-domain-cells'
+
+  protocol@13:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x13
+
+      '#clock-cells':
+        const: 1
+
+    required:
+      - '#clock-cells'
+
+  protocol@14:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x14
+
+      '#clock-cells':
+        const: 1
+
+    required:
+      - '#clock-cells'
+
+  protocol@15:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x15
+
+      '#thermal-sensor-cells':
+        const: 1
+
+    required:
+      - '#thermal-sensor-cells'
+
+  protocol@16:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x16
+
+      '#reset-cells':
+        const: 1
+
+    required:
+      - '#reset-cells'
+
+  protocol@17:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x17
+
+      regulators:
+        type: object
+        additionalProperties: false
+        description:
+          The list of all regulators provided by this SCMI controller.
+
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+        patternProperties:
+          '^regulator@[0-9a-f]+$':
+            type: object
+            $ref: /schemas/regulator/regulator.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              reg:
+                maxItems: 1
+                description: Identifier for the voltage regulator.
+
+            required:
+              - reg
+
+  protocol@18:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x18
+
+additionalProperties: false
+
+$defs:
+  protocol-node:
+    type: object
+    description:
+      Each sub-node represents a protocol supported. If the platform
+      supports a dedicated communication channel for a particular protocol,
+      then the corresponding transport properties must be present.
+      The virtio transport does not support a dedicated communication channel.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      mbox-names:
+        oneOf:
+          - items:
+              - const: tx
+              - const: rx
+            minItems: 1
+          - items:
+              - const: tx
+              - const: tx_reply
+              - const: rx
+            minItems: 2
+
+      mboxes:
+        minItems: 1
+        maxItems: 3
+
+      shmem:
+        minItems: 1
+        maxItems: 2
+
+      linaro,optee-channel-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Channel specifier required when using OP-TEE transport and
+          protocol has a dedicated communication channel.
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,scmi
+then:
+  properties:
+    interrupts: false
+    interrupt-names: false
+
+  required:
+    - mboxes
+    - shmem
+
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - arm,scmi-smc
+            - arm,scmi-smc-param
+  then:
+    required:
+      - arm,smc-id
+      - shmem
+
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: linaro,scmi-optee
+    then:
+      required:
+        - linaro,optee-channel-id
+
+examples:
+  - |
+    firmware {
+        scmi {
+            compatible = "arm,scmi";
+            mboxes = <&mhuB 0 0>,
+                     <&mhuB 0 1>;
+            mbox-names = "tx", "rx";
+            shmem = <&cpu_scp_lpri0>,
+                    <&cpu_scp_lpri1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            atomic-threshold-us = <10000>;
+
+            scmi_devpd: protocol@11 {
+                reg = <0x11>;
+                #power-domain-cells = <1>;
+            };
+
+            scmi_dvfs: protocol@13 {
+                reg = <0x13>;
+                #clock-cells = <1>;
+
+                mboxes = <&mhuB 1 0>,
+                         <&mhuB 1 1>;
+                mbox-names = "tx", "rx";
+                shmem = <&cpu_scp_hpri0>,
+                        <&cpu_scp_hpri1>;
+            };
+
+            scmi_clk: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+
+            scmi_sensors: protocol@15 {
+                reg = <0x15>;
+                #thermal-sensor-cells = <1>;
+            };
+
+            scmi_reset: protocol@16 {
+                reg = <0x16>;
+                #reset-cells = <1>;
+            };
+
+            scmi_voltage: protocol@17 {
+                reg = <0x17>;
+                regulators {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    regulator_devX: regulator@0 {
+                        reg = <0x0>;
+                        regulator-max-microvolt = <3300000>;
+                    };
+
+                    regulator_devY: regulator@9 {
+                        reg = <0x9>;
+                        regulator-min-microvolt = <500000>;
+                        regulator-max-microvolt = <4200000>;
+                    };
+                };
+            };
+
+            scmi_powercap: protocol@18 {
+                reg = <0x18>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@50000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x50000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x50000000 0x10000>;
+
+            cpu_scp_lpri0: scp-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+
+            cpu_scp_lpri1: scp-sram-section@80 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x80 0x80>;
+            };
+
+            cpu_scp_hpri0: scp-sram-section@100 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x100 0x80>;
+            };
+
+            cpu_scp_hpri2: scp-sram-section@180 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x180 0x80>;
+            };
+        };
+    };
+
+  - |
+    firmware {
+        scmi {
+            compatible = "arm,scmi-smc";
+            shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
+            arm,smc-id = <0xc3000001>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_devpd1: protocol@11 {
+                reg = <0x11>;
+                #power-domain-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    firmware {
+        scmi {
+            compatible = "linaro,scmi-optee";
+            linaro,optee-channel-id = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_dvfs1: protocol@13 {
+                reg = <0x13>;
+                linaro,optee-channel-id = <1>;
+                shmem = <&cpu_optee_lpri0>;
+                #clock-cells = <1>;
+            };
+
+            scmi_clk0: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@51000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x51000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x51000000 0x10000>;
+
+            cpu_optee_lpri0: optee-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
new file mode 100644
index 0000000000..241317239f
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 ARM Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/arm,scpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Control and Power Interface (SCPI) Message Protocol
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+
+description: |
+  Firmware implementing the SCPI described in ARM document number ARM DUI
+  0922B ("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be
+  used by Linux to initiate various system control and power operations.
+
+  This binding is intended to define the interface the firmware implementing
+  the SCPI provide for OSPM in the device tree.
+
+  [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
+
+properties:
+  $nodename:
+    const: scpi
+
+  compatible:
+    description:
+      SCPI compliant firmware complying to SCPI v1.0 and above OR
+      SCPI compliant firmware complying to all unversioned releases
+      prior to SCPI v1.0
+    oneOf:
+      - const: arm,scpi               # SCPI v1.0 and above
+      - const: arm,scpi-pre-1.0       # Unversioned SCPI before v1.0
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-scpi
+          - const: arm,scpi-pre-1.0
+
+  mboxes:
+    description:
+      List of phandle and mailbox channel specifiers. All the channels reserved
+      by remote SCP firmware for use by SCPI message protocol should be
+      specified in any order.
+    minItems: 1
+    maxItems: 4
+
+  shmem:
+    description:
+      List of phandle pointing to the shared memory(SHM) area between the
+      processors using these mailboxes for IPC, one for each mailbox SHM can
+      be any memory reserved for the purpose of this communication between the
+      processors.
+    minItems: 1
+    maxItems: 4
+
+  power-controller:
+    type: object
+    description:
+      This sub-node represents SCPI power domain controller.
+
+    properties:
+      compatible:
+        const: arm,scpi-power-domains
+
+      '#power-domain-cells':
+        const: 1
+
+      num-domains:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Total number of power domains provided by SCPI. This is needed as
+          the SCPI message protocol lacks a mechanism to query this
+          information at runtime.
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - num-domains
+
+    additionalProperties: false
+
+  sensors:
+    type: object
+    description: |
+      This sub-node represents SCPI sensors controller.
+
+    properties:
+      compatible:
+        oneOf:
+          - const: arm,scpi-sensors
+          - items:
+              - enum:
+                  - amlogic,meson-gxbb-scpi-sensors
+              - const: arm,scpi-sensors
+
+      '#thermal-sensor-cells':
+        const: 1
+
+    required:
+      - compatible
+      - '#thermal-sensor-cells'
+
+    additionalProperties: false
+
+  clocks:
+    type: object
+    description:
+      This is the container node. Each sub-node represents one of the types
+      of clock controller - indexed or full range.
+
+    properties:
+      compatible:
+        const: arm,scpi-clocks
+
+    patternProperties:
+      "^clocks-[0-9a-f]+$":
+        type: object
+        description: |
+          This sub-node represents one of the types of clock controller
+          - indexed or full range.
+
+          "arm,scpi-dvfs-clocks" - all the clocks that are variable and index
+          based. These clocks don't provide an entire range of values between
+          the limits but only discrete points within the range. The firmware
+          provides the mapping for each such operating frequency and the index
+          associated with it. The firmware also manages the voltage scaling
+          appropriately with the clock scaling.
+
+          "arm,scpi-variable-clocks" - all the clocks that are variable and
+          provide full range within the specified range. The firmware provides
+          the range of values within a specified range.
+
+        properties:
+          compatible:
+            enum:
+              - arm,scpi-dvfs-clocks
+              - arm,scpi-variable-clocks
+
+          '#clock-cells':
+            const: 1
+
+          clock-output-names: true
+
+          clock-indices:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description:
+              The identifying number for the clocks(i.e.clock_id) in the node.
+              It can be non linear and hence provide the mapping of identifiers
+              into the clock-output-names array.
+
+        required:
+          - compatible
+          - '#clock-cells'
+          - clock-output-names
+          - clock-indices
+
+        additionalProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+  - shmem
+
+examples:
+  - |
+    firmware {
+        scpi {
+            compatible = "arm,scpi";
+            mboxes = <&mhuA 1>;
+            shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
+
+            scpi_devpd: power-controller {
+                compatible = "arm,scpi-power-domains";
+                num-domains = <2>;
+                #power-domain-cells = <1>;
+            };
+
+            clocks {
+                compatible = "arm,scpi-clocks";
+
+                scpi_dvfs: clocks-0 {
+                    compatible = "arm,scpi-dvfs-clocks";
+                    #clock-cells = <1>;
+                    clock-indices = <0>, <1>, <2>;
+                    clock-output-names = "atlclk", "aplclk","gpuclk";
+                };
+
+                scpi_clk: clocks-1 {
+                    compatible = "arm,scpi-variable-clocks";
+                    #clock-cells = <1>;
+                    clock-indices = <3>, <4>;
+                    clock-output-names = "pxlclk0", "pxlclk1";
+                };
+            };
+
+            scpi_sensors: sensors {
+                compatible = "arm,scpi-sensors";
+                #thermal-sensor-cells = <1>;
+            };
+
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@50000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x50000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x50000000 0x10000>;
+
+            cpu_scp_lpri: scp-sram-section@0 {
+                compatible = "arm,scp-shmem";
+                reg = <0x0 0x200>;
+            };
+
+            cpu_scp_hpri: scp-sram-section@200 {
+                compatible = "arm,scp-shmem";
+                reg = <0x200 0x200>;
+            };
+        };
+    };
+
+  - |
+    firmware {
+        scpi {
+            compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+            mboxes = <&mailbox 1>, <&mailbox 2>;
+            shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>;
+
+            scpi_sensors1: sensors {
+                compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
new file mode 100644
index 0000000000..684b15ba9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family Secure Monitor bounce buffer
+
+description:
+  A bounce buffer used for non-secure to secure communications.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-smc
+          - brcm,bcm21664-smc
+          - brcm,bcm23550-smc
+      - const: brcm,kona-smc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smc@3404c000 {
+        compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+        reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/coreboot.txt b/Documentation/devicetree/bindings/firmware/coreboot.txt
new file mode 100644
index 0000000000..4c955703ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/coreboot.txt
@@ -0,0 +1,33 @@
+COREBOOT firmware information
+
+The device tree node to communicate the location of coreboot's memory-resident
+bookkeeping structures to the kernel. Since coreboot itself cannot boot a
+device-tree-based kernel (yet), this node needs to be inserted by a
+second-stage bootloader (a coreboot "payload").
+
+Required properties:
+ - compatible: Should be "coreboot"
+ - reg: Address and length of the following two memory regions, in order:
+	1.) The coreboot table. This is a list of variable-sized descriptors
+	that contain various compile- and run-time generated firmware
+	parameters. It is identified by the magic string "LBIO" in its first
+	four bytes.
+	See coreboot's src/commonlib/include/commonlib/coreboot_tables.h for
+	details.
+	2.) The CBMEM area. This is a downward-growing memory region used by
+	coreboot to dynamically allocate data structures that remain resident.
+	It may or may not include the coreboot table as one of its members. It
+	is identified by a root node descriptor with the magic number
+	0xc0389481 that resides in the topmost 8 bytes of the area.
+	See coreboot's src/include/imd.h for details.
+
+Example:
+	firmware {
+		ranges;
+
+		coreboot {
+			compatible = "coreboot";
+			reg = <0xfdfea000 0x264>,
+			      <0xfdfea000 0x16000>;
+		}
+	};
diff --git a/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt b/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
new file mode 100644
index 0000000000..338169dea7
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
@@ -0,0 +1,19 @@
+Turris Mox rWTM firmware driver
+
+Required properties:
+ - compatible		: Should be "cznic,turris-mox-rwtm"
+ - mboxes		: Must contain a reference to associated mailbox
+
+This device tree node should be used on Turris Mox, or potentially another A3700
+compatible device running the Mox's rWTM firmware in the secure processor (for
+example it is possible to flash this firmware into EspressoBin).
+
+Example:
+
+	firmware {
+		turris-mox-rwtm {
+			compatible = "cznic,turris-mox-rwtm";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
new file mode 100644
index 0000000000..557e524786
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX System Controller Firmware (SCFW)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  The System Controller Firmware (SCFW) is a low-level system function
+  which runs on a dedicated Cortex-M core to provide power, clock, and
+  resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+  (QM, QP), and i.MX8QX (QXP, DX).
+  The AP communicates with the SC using a multi-ported MU module found
+  in the LSIO subsystem. The current definition of this MU module provides
+  5 remote AP connections to the SC to support up to 5 execution environments
+  (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+  with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+  using the MSI bus.
+
+properties:
+  compatible:
+    const: fsl,imx-scu
+
+  clock-controller:
+    description:
+      Clock controller node that provides the clocks controlled by the SCU
+    $ref: /schemas/clock/fsl,scu-clk.yaml
+
+  gpio:
+    description:
+      Control the GPIO PINs on SCU domain over the firmware APIs
+    $ref: /schemas/gpio/fsl,imx8qxp-sc-gpio.yaml
+
+  ocotp:
+    description:
+      OCOTP controller node provided by the SCU
+    $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
+
+  keys:
+    description:
+      Keys provided by the SCU
+    $ref: /schemas/input/fsl,scu-key.yaml
+
+  mboxes:
+    description:
+      A list of phandles of TX MU channels followed by a list of phandles of
+      RX MU channels. The list may include at the end one more optional MU
+      channel for general interrupt. The number of expected tx and rx
+      channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
+      compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
+      within the same MU instance. Cross instances are not allowed. The MU
+      instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
+      need to ensure that one is used that does not conflict with other
+      execution environments such as ATF.
+    oneOf:
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+          - description: optional MU channel for general interrupt
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+          - description: optional MU channel for general interrupt
+
+  mbox-names:
+    oneOf:
+      - items:
+          - const: tx0
+          - const: rx0
+      - items:
+          - const: tx0
+          - const: rx0
+          - const: gip3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+          - const: gip3
+
+  pinctrl:
+    description:
+      Pin controller provided by the SCU
+    $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
+
+  power-controller:
+    description:
+      Power domains controller node that provides the power domains
+      controlled by the SCU
+    $ref: /schemas/power/fsl,scu-pd.yaml
+
+  rtc:
+    description:
+      RTC controller provided by the SCU
+    $ref: /schemas/rtc/fsl,scu-rtc.yaml
+
+  thermal-sensor:
+    description:
+      Thermal sensor provided by the SCU
+    $ref: /schemas/thermal/fsl,scu-thermal.yaml
+
+  watchdog:
+    description:
+      Watchdog controller provided by the SCU
+    $ref: /schemas/watchdog/fsl,scu-wdt.yaml
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+    firmware {
+        system-controller {
+            compatible = "fsl,imx-scu";
+            mbox-names = "tx0", "tx1", "tx2", "tx3",
+                         "rx0", "rx1", "rx2", "rx3",
+                         "gip3";
+            mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
+                      &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
+                      &lsio_mu1 3 3>;
+
+            clock-controller {
+                compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+                #clock-cells = <2>;
+            };
+
+            pinctrl {
+                compatible = "fsl,imx8qxp-iomuxc";
+
+                pinctrl_lpuart0: lpuart0grp {
+                    fsl,pins = <
+                        IMX8QXP_UART0_RX_ADMA_UART0_RX   0x06000020
+                        IMX8QXP_UART0_TX_ADMA_UART0_TX   0x06000020
+                    >;
+                };
+            };
+
+            ocotp {
+                compatible = "fsl,imx8qxp-scu-ocotp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                fec_mac0: mac@2c4 {
+                    reg = <0x2c4 6>;
+                };
+            };
+
+            power-controller {
+                compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+                #power-domain-cells = <1>;
+            };
+
+            rtc {
+                compatible = "fsl,imx8qxp-sc-rtc";
+            };
+
+            keys {
+                compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+                linux,keycodes = <KEY_POWER>;
+            };
+
+            watchdog {
+                compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+                timeout-sec = <60>;
+            };
+
+            thermal-sensor {
+                compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
new file mode 100644
index 0000000000..e6bed7d93e
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Network Processing Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
+  processor that can load a firmware to perform offloading of networking
+  and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
+  on the IXP4xx platform. All IXP4xx platforms have three NPEs at
+  consecutive memory locations. They are all included in the same
+  device node since they are not independent of each other.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: intel,ixp4xx-network-processing-engine
+
+  reg:
+    items:
+      - description: NPE0 (NPE-A) register range
+      - description: NPE1 (NPE-B) register range
+      - description: NPE2 (NPE-C) register range
+
+  crypto:
+    $ref: /schemas/crypto/intel,ixp4xx-crypto.yaml#
+    type: object
+    description: Optional node for the embedded crypto engine, the node
+      should be named with the instance number of the NPE engine used for
+      the crypto engine.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  hss@[0-9]+$:
+    $ref: /schemas/net/intel,ixp4xx-hss.yaml#
+    type: object
+    description: Optional node for the High Speed Serial link (HSS), the
+      node should be named with the instance number of the NPE engine
+      used for the HSS.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    npe: npe@c8006000 {
+         compatible = "intel,ixp4xx-network-processing-engine";
+         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+         hss@0 {
+             compatible = "intel,ixp4xx-hss";
+             reg = <0>;
+             intel,npe-handle = <&npe 0>;
+             intel,queue-chl-rxtrig = <&qmgr 12>;
+             intel,queue-chl-txready = <&qmgr 34>;
+             intel,queue-pkt-rx = <&qmgr 13>;
+             intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+             intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+             intel,queue-pkt-txdone = <&qmgr 22>;
+             cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+             rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+             dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+             dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+             clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+         };
+
+         crypto {
+             compatible = "intel,ixp4xx-crypto";
+             intel,npe-handle = <&npe 2>;
+             queue-rx = <&qmgr 30>;
+             queue-txready = <&qmgr 29>;
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
new file mode 100644
index 0000000000..6eff1afd8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
@@ -0,0 +1,57 @@
+Intel Service Layer Driver for Stratix10 SoC
+============================================
+Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
+processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
+configured from HPS, there needs to be a way for HPS to notify SDM the
+location and size of the configuration data. Then SDM will get the
+configuration data from that location and perform the FPGA configuration.
+
+To meet the whole system security needs and support virtual machine requesting
+communication with SDM, only the secure world of software (EL3, Exception
+Layer 3) can interface with SDM. All software entities running on other
+exception layers must channel through the EL3 software whenever it needs
+service from SDM.
+
+Intel Stratix10 service layer driver, running at privileged exception level
+(EL1, Exception Layer 1), interfaces with the service providers and provides
+the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
+driver also manages secure monitor call (SMC) to communicate with secure monitor
+code running in EL3.
+
+Required properties:
+-------------------
+The svc node has the following mandatory properties, must be located under
+the firmware node.
+
+- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
+- method: smc or hvc
+        smc - Secure Monitor Call
+        hvc - Hypervisor Call
+- memory-region:
+	phandle to the reserved memory node. See
+	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+	for details
+
+Example:
+-------
+
+	reserved-memory {
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges;
+
+                service_reserved: svcbuffer@0 {
+                        compatible = "shared-dma-pool";
+                        reg = <0x0 0x0 0x0 0x1000000>;
+                        alignment = <0x1000>;
+                        no-map;
+                };
+        };
+
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
new file mode 100644
index 0000000000..c43d17f6e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nvidia,tegra186-bpmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The BPMP is a specific processor in Tegra chip, which is designed for
+  booting process handling and offloading the power management, clock
+  management, and reset control tasks from the CPU. The binding document
+  defines the resources that would be used by the BPMP firmware driver,
+  which can create the interprocessor communication (IPC) between the
+  CPU and BPMP.
+
+  This node is a mailbox consumer. See the following files for details
+  of the mailbox subsystem, and the specifiers implemented by the
+  relevant provider(s):
+
+    - .../mailbox/mailbox.txt
+    - .../mailbox/nvidia,tegra186-hsp.yaml
+
+  This node is a clock, power domain, and reset provider. See the
+  following files for general documentation of those features, and the
+  specifiers implemented by this node:
+
+    - .../clock/clock-bindings.txt
+    - <dt-bindings/clock/tegra186-clock.h>
+    - ../power/power-domain.yaml
+    - <dt-bindings/power/tegra186-powergate.h>
+    - .../reset/reset.txt
+    - <dt-bindings/reset/tegra186-reset.h>
+
+  The BPMP implements some services which must be represented by
+  separate nodes. For example, it can provide access to certain I2C
+  controllers, and the I2C bindings represent each I2C controller as a
+  device tree node. Such nodes should be nested directly inside the main
+  BPMP node.
+
+  Software can determine whether a child node of the BPMP node
+  represents a device by checking for a compatible property. Any node
+  with a compatible property represents a device that can be
+  instantiated. Nodes without a compatible property may be used to
+  provide configuration information regarding the BPMP itself, although
+  no such configuration nodes are currently defined by this binding.
+
+  The BPMP firmware defines no single global name-/numbering-space for
+  such services. Put another way, the numbering scheme for I2C buses is
+  distinct from the numbering scheme for any other service the BPMP may
+  provide (e.g. a future hypothetical SPI bus service). As such, child
+  device nodes will have no reg property, and the BPMP node will have no
+  "#address-cells" or "#size-cells" property.
+
+  The shared memory area for the IPC TX and RX between CPU and BPMP are
+  predefined and work on top of either sysram, which is an SRAM inside the
+  chip, or in normal SDRAM.
+  See ".../sram/sram.yaml" for the bindings for the SRAM case.
+  See "../reserved-memory/nvidia,tegra264-bpmp-shmem.yaml" for bindings for
+  the SDRAM case.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra194-bpmp
+              - nvidia,tegra234-bpmp
+          - const: nvidia,tegra186-bpmp
+      - const: nvidia,tegra186-bpmp
+
+  mboxes:
+    description: A phandle and channel specifier for the mailbox used to
+      communicate with the BPMP.
+    maxItems: 1
+
+  shmem:
+    description: List of the phandle to the TX and RX shared memory area
+      that the IPC between CPU and BPMP is based on.
+    minItems: 2
+    maxItems: 2
+
+  memory-region:
+    description: phandle to reserved memory region used for IPC between
+      CPU-NS and BPMP.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+      - description: DMA read client
+      - description: DMA write client
+
+  interconnect-names:
+    items:
+      - const: read
+      - const: write
+      - const: dma-mem # dma-read
+      - const: dma-write
+
+  iommus:
+    maxItems: 1
+
+  i2c:
+    type: object
+
+  thermal:
+    type: object
+
+additionalProperties: false
+
+oneOf:
+  - required:
+      - memory-region
+  - required:
+      - shmem
+
+required:
+  - compatible
+  - mboxes
+  - "#clock-cells"
+  - "#power-domain-cells"
+  - "#reset-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    sram@30000000 {
+        compatible = "nvidia,tegra186-sysram", "mmio-sram";
+        reg = <0x30000000 0x50000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x30000000 0x50000>;
+
+        cpu_bpmp_tx: sram@4e000 {
+            reg = <0x4e000 0x1000>;
+            label = "cpu-bpmp-tx";
+            pool;
+        };
+
+        cpu_bpmp_rx: sram@4f000 {
+            reg = <0x4f000 0x1000>;
+            label = "cpu-bpmp-rx";
+            pool;
+        };
+    };
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        iommus = <&smmu TEGRA186_SID_BPMP>;
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
+        shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+
+        i2c {
+            compatible = "nvidia,tegra186-bpmp-i2c";
+            nvidia,bpmp-bus-id = <5>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        thermal {
+            compatible = "nvidia,tegra186-bpmp-thermal";
+            #thermal-sensor-cells = <1>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        mboxes = <&hsp_top1 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
+        memory-region = <&dram_cpu_bpmp_mail>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt
new file mode 100644
index 0000000000..68d814e8c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra210-bpmp.txt
@@ -0,0 +1,35 @@
+NVIDIA Tegra210 Boot and Power Management Processor (BPMP)
+
+The Boot and Power Management Processor (BPMP) is a co-processor found
+in Tegra210 SoC. It is designed to handle the early stages of the boot
+process as well as to assisting in entering deep low power state
+(suspend to ram), and also offloading DRAM memory clock scaling on
+some platforms. The binding document defines the resources that would
+be used by the BPMP T210 firmware driver, which can create the
+interprocessor communication (IPC) between the CPU and BPMP.
+
+Required properties:
+- compatible
+    Array of strings
+    One of:
+    - "nvidia,tegra210-bpmp"
+- reg: physical base address and length for HW synchornization primitives
+       1) base address and length to Tegra 'atomics' hardware
+       2) base address and length to Tegra 'semaphore' hardware
+- interrupts: specifies the interrupt number for receiving messages ("rx")
+              and for triggering messages ("tx")
+
+Optional properties:
+- #clock-cells : Should be 1 for platforms where DRAM clock control is
+                 offloaded to bpmp.
+
+Example:
+
+bpmp@70016000 {
+	compatible = "nvidia,tegra210-bpmp";
+	reg = <0x0 0x70016000 0x0 0x2000
+	       0x0 0x60001000 0x0 0x1000>;
+	interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+		     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
new file mode 100644
index 0000000000..4233ea839b
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq5332
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-ipq9574
+          - qcom,scm-mdm9607
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-qcm2290
+          - qcom,scm-qdu1000
+          - qcom,scm-sa8775p
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sc8180x
+          - qcom,scm-sc8280xp
+          - qcom,scm-sdm670
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sdx65
+          - qcom,scm-sdx75
+          - qcom,scm-sm6115
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm6375
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-sm8550
+          - qcom,scm-qcs404
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  interrupts:
+    description:
+      The wait-queue interrupt that firmware raises as part of handshake
+      protocol to handle sleeping SCM calls.
+    maxItems: 1
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  # Clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8226
+              - qcom,scm-msm8660
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8960
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+              - qcom,scm-qcm2290
+              - qcom,scm-sm6375
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clock-names: false
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+              - qcom,scm-qcm2290
+              - qcom,scm-sm6375
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8226
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+  # Interconnects
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-qdu1000
+                - qcom,scm-sc8280xp
+                - qcom,scm-sm8450
+                - qcom,scm-sm8550
+    then:
+      properties:
+        interconnects: false
+
+  # Interrupts
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-sm8450
+                - qcom,scm-sm8550
+    then:
+      properties:
+        interrupts: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,scm-msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
new file mode 100644
index 0000000000..3faae32366
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU Firmware Configuration
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Various QEMU emulation / virtualization targets provide the following
+  Firmware Configuration interface on the "virt" machine type:
+
+  - A write-only, 16-bit wide selector (or control) register,
+  - a read-write, 64-bit wide data register.
+
+  QEMU exposes the control and data register to guests as memory mapped
+  registers; their location is communicated to the guest's UEFI firmware in the
+  DTB that QEMU places at the bottom of the guest's DRAM.
+
+  The authoritative guest-side hardware interface documentation to the fw_cfg
+  device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
+
+
+properties:
+  compatible:
+    const: qemu,fw-cfg-mmio
+
+  reg:
+    maxItems: 1
+    description: |
+      * Bytes 0x0 to 0x7 cover the data register.
+      * Bytes 0x8 to 0x9 cover the selector register.
+      * Further registers may be appended to the region in case of future interface
+        revisions / feature bits.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    fw-cfg@9020000 {
+        compatible = "qemu,fw-cfg-mmio";
+        reg = <0x9020000 0xa>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
new file mode 100644
index 0000000000..822864488d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/xilinx/xlnx,zynqmp-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx firmware driver
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: The zynqmp-firmware node describes the interface to platform
+  firmware. ZynqMP has an interface to communicate with secure firmware.
+  Firmware driver provides an interface to firmware APIs. Interface APIs
+  can be used by any driver to communicate to PMUFW(Platform Management Unit).
+  These requests include clock management, pin control, device control,
+  power management service, FPGA service and other platform management
+  services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: For implementations complying for Zynq Ultrascale+ MPSoC.
+        const: xlnx,zynqmp-firmware
+
+      - description: For implementations complying for Versal.
+        const: xlnx,versal-firmware
+
+  method:
+    description: |
+                 The method of calling the PM-API firmware layer.
+                 Permitted values are.
+                 - "smc" : SMC #0, following the SMCCC
+                 - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      - hvc
+
+  "#power-domain-cells":
+    const: 1
+
+  versal_fpga:
+    $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
+    description: Compatible of the FPGA device.
+    type: object
+
+  zynqmp-aes:
+    $ref: /schemas/crypto/xlnx,zynqmp-aes.yaml#
+    description: The ZynqMP AES-GCM hardened cryptographic accelerator is
+      used to encrypt or decrypt the data with provided key and initialization
+      vector.
+    type: object
+
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        #power-domain-cells = <1>;
+        };
+    };
+
+    sata {
+      power-domains = <&zynqmp_firmware PD_SATA>;
+    };
+
+    versal-firmware {
+      compatible = "xlnx,versal-firmware";
+      method = "smc";
+
+      versal_fpga: versal_fpga {
+        compatible = "xlnx,versal-fpga";
+      };
+
+      xlnx_aes: zynqmp-aes {
+        compatible = "xlnx,zynqmp-aes";
+      };
+
+      versal_clk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "xlnx,versal-clk";
+        clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+        clock-names = "ref", "alt_ref", "pl_alt_ref";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
new file mode 100644
index 0000000000..5dd0ff0f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
@@ -0,0 +1,13 @@
+Altera FPGA To SDRAM Bridge Driver
+
+Required properties:
+- compatible		: Should contain "altr,socfpga-fpga2sdram-bridge"
+
+See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
+
+Example:
+	fpga_bridge3: fpga-bridge@ffc25080 {
+		compatible = "altr,socfpga-fpga2sdram-bridge";
+		reg = <0xffc25080 0x4>;
+		bridge-enable = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
new file mode 100644
index 0000000000..8b26fbcff3
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
@@ -0,0 +1,20 @@
+Altera Freeze Bridge Controller Driver
+
+The Altera Freeze Bridge Controller manages one or more freeze bridges.
+The controller can freeze/disable the bridges which prevents signal
+changes from passing through the bridge.  The controller can also
+unfreeze/enable the bridges which allows traffic to pass through the
+bridge normally.
+
+Required properties:
+- compatible		: Should contain "altr,freeze-bridge-controller"
+- regs			: base address and size for freeze bridge module
+
+See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
+
+Example:
+	freeze-controller@100000450 {
+		compatible = "altr,freeze-bridge-controller";
+		regs = <0x1000 0x10>;
+		bridge-enable = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
new file mode 100644
index 0000000000..68cce3945b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
@@ -0,0 +1,36 @@
+Altera FPGA/HPS Bridge Driver
+
+Required properties:
+- regs		: base address and size for AXI bridge module
+- compatible	: Should contain one of:
+		  "altr,socfpga-lwhps2fpga-bridge",
+		  "altr,socfpga-hps2fpga-bridge", or
+		  "altr,socfpga-fpga2hps-bridge"
+- resets	: Phandle and reset specifier for this bridge's reset
+- clocks	: Clocks used by this module.
+
+See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
+
+Example:
+	fpga_bridge0: fpga-bridge@ff400000 {
+		compatible = "altr,socfpga-lwhps2fpga-bridge";
+		reg = <0xff400000 0x100000>;
+		resets = <&rst LWHPS2FPGA_RESET>;
+		clocks = <&l4_main_clk>;
+		bridge-enable = <0>;
+	};
+
+	fpga_bridge1: fpga-bridge@ff500000 {
+		compatible = "altr,socfpga-hps2fpga-bridge";
+		reg = <0xff500000 0x10000>;
+		resets = <&rst HPS2FPGA_RESET>;
+		clocks = <&l4_main_clk>;
+		bridge-enable = <1>;
+	};
+
+	fpga_bridge2: fpga-bridge@ff600000 {
+		compatible = "altr,socfpga-fpga2hps-bridge";
+		reg = <0xff600000 0x100000>;
+		resets = <&rst FPGA2HPS_RESET>;
+		clocks = <&l4_main_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
new file mode 100644
index 0000000000..48478bc07e
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
@@ -0,0 +1,29 @@
+Altera Passive Serial SPI FPGA Manager
+
+Altera FPGAs support a method of loading the bitstream over what is
+referred to as "passive serial".
+The passive serial link is not technically SPI, and might require extra
+circuits in order to play nicely with other SPI slaves on the same bus.
+
+See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+Required properties:
+- compatible: Must be one of the following:
+	"altr,fpga-passive-serial",
+	"altr,fpga-arria10-passive-serial"
+- reg: SPI chip select of the FPGA
+- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
+- nstat-gpios: status pin (referred to as nSTATUS in the manual)
+
+Optional properties:
+- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
+
+Example:
+	fpga: fpga@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt b/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt
new file mode 100644
index 0000000000..52a294cf27
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-pr-ip.txt
@@ -0,0 +1,12 @@
+Altera Arria10 Partial Reconfiguration IP
+
+Required properties:
+- compatible : should contain "altr,a10-pr-ip"
+- reg        : base address and size for memory mapped io.
+
+Example:
+
+	fpga_mgr: fpga-mgr@ff20c000 {
+		compatible = "altr,a10-pr-ip";
+		reg = <0xff20c000 0x10>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-socfpga-a10-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
new file mode 100644
index 0000000000..2fd8e7a847
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-socfpga-a10-fpga-mgr.txt
@@ -0,0 +1,19 @@
+Altera SOCFPGA Arria10 FPGA Manager
+
+Required properties:
+- compatible : should contain "altr,socfpga-a10-fpga-mgr"
+- reg        : base address and size for memory mapped io.
+               - The first index is for FPGA manager register access.
+               - The second index is for writing FPGA configuration data.
+- resets     : Phandle and reset specifier for the device's reset.
+- clocks     : Clocks used by the device.
+
+Example:
+
+	fpga_mgr: fpga-mgr@ffd03000 {
+		compatible = "altr,socfpga-a10-fpga-mgr";
+		reg = <0xffd03000 0x100
+		       0xffcfe400 0x20>;
+		clocks = <&l4_mp_clk>;
+		resets = <&rst FPGAMGR_RESET>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt
new file mode 100644
index 0000000000..d52f334041
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt
@@ -0,0 +1,17 @@
+Altera SOCFPGA FPGA Manager
+
+Required properties:
+- compatible : should contain "altr,socfpga-fpga-mgr"
+- reg        : base address and size for memory mapped io.
+               - The first index is for FPGA manager register access.
+               - The second index is for writing FPGA configuration data.
+- interrupts : interrupt for the FPGA Manager device.
+
+Example:
+
+	hps_0_fpgamgr: fpgamgr@ff706000 {
+		compatible = "altr,socfpga-fpga-mgr";
+		reg = <0xFF706000 0x1000
+		       0xFFB90000 0x1000>;
+		interrupts = <0 175 4>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
new file mode 100644
index 0000000000..72e0691728
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
@@ -0,0 +1,13 @@
+FPGA Bridge Device Tree Binding
+
+Optional properties:
+- bridge-enable		: 0 if driver should disable bridge at startup
+			  1 if driver should enable bridge at startup
+			  Default is to leave bridge in current state.
+
+Example:
+	fpga_bridge3: fpga-bridge@ffc25080 {
+		compatible = "altr,socfpga-fpga2sdram-bridge";
+		reg = <0xffc25080 0x4>;
+		bridge-enable = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
new file mode 100644
index 0000000000..528df8a0e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -0,0 +1,479 @@
+FPGA Region Device Tree Binding
+
+Alan Tull 2016
+
+ CONTENTS
+ - Introduction
+ - Terminology
+ - Sequence
+ - FPGA Region
+ - Supported Use Models
+ - Device Tree Examples
+ - Constraints
+
+
+Introduction
+============
+
+FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
+control.
+
+This device tree binding document hits some of the high points of FPGA usage and
+attempts to include terminology used by both major FPGA manufacturers.  This
+document isn't a replacement for any manufacturers specifications for FPGA
+usage.
+
+
+Terminology
+===========
+
+Full Reconfiguration
+ * The entire FPGA is programmed.
+
+Partial Reconfiguration (PR)
+ * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+   affected.
+ * Not all FPGA's support PR.
+
+Partial Reconfiguration Region (PRR)
+ * Also called a "reconfigurable partition"
+ * A PRR is a specific section of an FPGA reserved for reconfiguration.
+ * A base (or static) FPGA image may create a set of PRR's that later may
+   be independently reprogrammed many times.
+ * The size and specific location of each PRR is fixed.
+ * The connections at the edge of each PRR are fixed.  The image that is loaded
+   into a PRR must fit and must use a subset of the region's connections.
+ * The busses within the FPGA are split such that each region gets its own
+   branch that may be gated independently.
+
+Persona
+ * Also called a "partial bit stream"
+ * An FPGA image that is designed to be loaded into a PRR.  There may be
+   any number of personas designed to fit into a PRR, but only one at at time
+   may be loaded.
+ * A persona may create more regions.
+
+FPGA Bridge
+ * FPGA Bridges gate bus signals between a host and FPGA.
+ * FPGA Bridges should be disabled while the FPGA is being programmed to
+   prevent spurious signals on the cpu bus and to the soft logic.
+ * FPGA bridges may be actual hardware or soft logic on an FPGA.
+ * During Full Reconfiguration, hardware bridges between the host and FPGA
+   will be disabled.
+ * During Partial Reconfiguration of a specific region, that region's bridge
+   will be used to gate the busses.  Traffic to other regions is not affected.
+ * In some implementations, the FPGA Manager transparently handles gating the
+   buses, eliminating the need to show the hardware FPGA bridges in the
+   device tree.
+ * An FPGA image may create a set of reprogrammable regions, each having its
+   own bridge and its own split of the busses in the FPGA.
+
+FPGA Manager
+ * An FPGA Manager is a hardware block that programs an FPGA under the control
+   of a host processor.
+
+Base Image
+ * Also called the "static image"
+ * An FPGA image that is designed to do full reconfiguration of the FPGA.
+ * A base image may set up a set of partial reconfiguration regions that may
+   later be reprogrammed.
+
+    ----------------       ----------------------------------
+    |  Host CPU    |       |             FPGA               |
+    |              |       |                                |
+    |          ----|       |       -----------    --------  |
+    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
+    |          | W |       |   |   -----------    --------  |
+    |          |   |       |   |                            |
+    |          | B |<=====>|<==|   -----------    --------  |
+    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
+    |          | I |       |   |   -----------    --------  |
+    |          | D |       |   |                            |
+    |          | G |       |   |   -----------    --------  |
+    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
+    |          ----|       |       -----------    --------  |
+    |              |       |                                |
+    ----------------       ----------------------------------
+
+Figure 1: An FPGA set up with a base image that created three regions.  Each
+region (PRR0-2) gets its own split of the busses that is independently gated by
+a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
+reprogrammed independently while the rest of the system continues to function.
+
+
+Sequence
+========
+
+When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
+do the following:
+
+ 1. Disable appropriate FPGA bridges.
+ 2. Program the FPGA using the FPGA manager.
+ 3. Enable the FPGA bridges.
+ 4. The Device Tree overlay is accepted into the live tree.
+ 5. Child devices are populated.
+
+When the overlay is removed, the child nodes will be removed and the FPGA Region
+will disable the bridges.
+
+
+FPGA Region
+===========
+
+FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
+Region brings together the elements needed to program on a running system and
+add the child devices:
+
+ * FPGA Manager
+ * FPGA Bridges
+ * image-specific information needed to to the programming.
+ * child nodes
+
+The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+FPGA while an operating system is running.
+
+An FPGA Region that exists in the live Device Tree reflects the current state.
+If the live tree shows a "firmware-name" property or child nodes under an FPGA
+Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
+and adds the "firmware-name" property is taken as a request to reprogram the
+FPGA.  After reprogramming is successful, the overlay is accepted into the live
+tree.
+
+The base FPGA Region in the device tree represents the FPGA and supports full
+reconfiguration.  It must include a phandle to an FPGA Manager.  The base
+FPGA region will be the child of one of the hardware bridges (the bridge that
+allows register access) between the cpu and the FPGA.  If there are more than
+one bridge to control during FPGA programming, the region will also contain a
+list of phandles to the additional hardware FPGA Bridges.
+
+For partial reconfiguration (PR), each PR region will have an FPGA Region.
+These FPGA regions are children of FPGA bridges which are then children of the
+base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
+this.
+
+If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
+Manager specified by its ancestor FPGA Region.  This supports both the case
+where the same FPGA Manager is used for all of an FPGA as well the case where
+a different FPGA Manager is used for each region.
+
+FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
+shutting down bridges that are upstream from the other active regions while one
+region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
+hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
+within the static image of the FPGA.
+
+Required properties:
+- compatible : should contain "fpga-region"
+- fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
+	inherit this property from their ancestor regions.  An fpga-mgr property
+	in a region will override any inherited FPGA manager.
+- #address-cells, #size-cells, ranges : must be present to handle address space
+	mapping for child nodes.
+
+Optional properties:
+- firmware-name : should contain the name of an FPGA image file located on the
+	firmware search path.  If this property shows up in a live device tree
+	it indicates that the FPGA has already been programmed with this image.
+	If this property is in an overlay targeting an FPGA region, it is a
+	request to program the FPGA with that image.
+- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
+	controlled during FPGA programming along with the parent FPGA bridge.
+	This property is optional if the FPGA Manager handles the bridges.
+        If the fpga-region is  the child of an fpga-bridge, the list should not
+        contain the parent bridge.
+- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
+	otherwise full reconfiguration is done.
+- external-fpga-config : boolean, set if the FPGA has already been configured
+	prior to OS boot up.
+- encrypted-fpga-config : boolean, set if the bitstream is encrypted
+- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
+	bridges to successfully become enabled after the region has been
+	programmed.
+- region-freeze-timeout-us : The maximum time in microseconds to wait for
+	bridges to successfully become disabled before the region has been
+	programmed.
+- config-complete-timeout-us : The maximum time in microseconds time for the
+	FPGA to go to operating mode after the region has been programmed.
+- child nodes : devices in the FPGA after programming.
+
+In the example below, when an overlay is applied targeting fpga-region0,
+fpga_mgr is used to program the FPGA.  Two bridges are controlled during
+programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
+the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
+fpga-bridges property.  During programming, these bridges are disabled, the
+firmware specified in the overlay is loaded to the FPGA using the FPGA manager
+specified in the region.  If FPGA programming succeeds, the bridges are
+reenabled and the overlay makes it into the live device tree.  The child devices
+are then populated.  If FPGA programming fails, the bridges are left disabled
+and the overlay is rejected.  The overlay's ranges property maps the lwhps
+bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
+the two child devices.
+
+Example:
+Base tree contains:
+
+	fpga_mgr: fpga-mgr@ff706000 {
+		compatible = "altr,socfpga-fpga-mgr";
+		reg = <0xff706000 0x1000
+		       0xffb90000 0x20>;
+		interrupts = <0 175 4>;
+	};
+
+	fpga_bridge0: fpga-bridge@ff400000 {
+		compatible = "altr,socfpga-lwhps2fpga-bridge";
+		reg = <0xff400000 0x100000>;
+		resets = <&rst LWHPS2FPGA_RESET>;
+		clocks = <&l4_main_clk>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fpga_region0: fpga-region0 {
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+	};
+
+	fpga_bridge1: fpga-bridge@ff500000 {
+		compatible = "altr,socfpga-hps2fpga-bridge";
+		reg = <0xff500000 0x10000>;
+		resets = <&rst HPS2FPGA_RESET>;
+		clocks = <&l4_main_clk>;
+	};
+
+Overlay contains:
+
+/dts-v1/;
+/plugin/;
+
+&fpga_region0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "soc_system.rbf";
+	fpga-bridges = <&fpga_bridge1>;
+	ranges = <0x20000 0xff200000 0x100000>,
+		 <0x0 0xc0000000 0x20000000>;
+
+	gpio@10040 {
+		compatible = "altr,pio-1.0";
+		reg = <0x10040 0x20>;
+		altr,ngpio = <4>;
+		#gpio-cells = <2>;
+		clocks = <2>;
+		gpio-controller;
+	};
+
+	onchip-memory {
+		device_type = "memory";
+		compatible = "altr,onchipmem-15.1";
+		reg = <0x0 0x10000>;
+	};
+};
+
+
+Supported Use Models
+====================
+
+In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
+uses are specific to an FPGA device.
+
+ * No FPGA Bridges
+   In this case, the FPGA Manager which programs the FPGA also handles the
+   bridges behind the scenes.  No FPGA Bridge devices are needed for full
+   reconfiguration.
+
+ * Full reconfiguration with hardware bridges
+   In this case, there are hardware bridges between the processor and FPGA that
+   need to be controlled during full reconfiguration.  Before the overlay is
+   applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+   FPGA Region.  The FPGA Region is the child of the bridge that allows
+   register access to the FPGA.  Additional bridges may be listed in a
+   fpga-bridges property in the FPGA region or in the device tree overlay.
+
+ * Partial reconfiguration with bridges in the FPGA
+   In this case, the FPGA will have one or more PRR's that may be programmed
+   separately while the rest of the FPGA can remain active.  To manage this,
+   bridges need to exist in the FPGA that can gate the buses going to each FPGA
+   region while the buses are enabled for other sections.  Before any partial
+   reconfiguration can be done, a base FPGA image must be loaded which includes
+   PRR's with FPGA bridges.  The device tree should have an FPGA region for each
+   PRR.
+
+Device Tree Examples
+====================
+
+The intention of this section is to give some simple examples, focusing on
+the placement of the elements detailed above, especially:
+ * FPGA Manager
+ * FPGA Bridges
+ * FPGA Region
+ * ranges
+ * target-path or target
+
+For the purposes of this section, I'm dividing the Device Tree into two parts,
+each with its own requirements.  The two parts are:
+ * The live DT prior to the overlay being added
+ * The DT overlay
+
+The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
+Bridges.  The FPGA Region's "fpga-mgr" property specifies the manager by phandle
+to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
+Region, the parent's FPGA Manager is used.  If FPGA Bridges need to be involved,
+they are specified in the FPGA Region by the "fpga-bridges" property.  During
+FPGA programming, the FPGA Region will disable the bridges that are in its
+"fpga-bridges" list and will re-enable them after FPGA programming has
+succeeded.
+
+The Device Tree Overlay will contain:
+ * "target-path" or "target"
+   The insertion point where the contents of the overlay will go into the
+   live tree.  target-path is a full path, while target is a phandle.
+ * "ranges"
+    The address space mapping from processor to FPGA bus(ses).
+ * "firmware-name"
+   Specifies the name of the FPGA image file on the firmware search
+   path.  The search path is described in the firmware class documentation.
+ * "partial-fpga-config"
+   This binding is a boolean and should be present if partial reconfiguration
+   is to be done.
+ * child nodes corresponding to hardware that will be loaded in this region of
+   the FPGA.
+
+Device Tree Example: Full Reconfiguration without Bridges
+=========================================================
+
+Live Device Tree contains:
+	fpga_mgr0: fpga-mgr@f8007000 {
+		compatible = "xlnx,zynq-devcfg-1.0";
+		reg = <0xf8007000 0x100>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 8 4>;
+		clocks = <&clkc 12>;
+		clock-names = "ref_clk";
+		syscon = <&slcr>;
+	};
+
+	fpga_region0: fpga-region0 {
+		compatible = "fpga-region";
+		fpga-mgr = <&fpga_mgr0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+	};
+
+DT Overlay contains:
+
+/dts-v1/;
+/plugin/;
+
+&fpga_region0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "zynq-gpio.bin";
+
+	gpio1: gpio@40000000 {
+		compatible = "xlnx,xps-gpio-1.00.a";
+		reg = <0x40000000 0x10000>;
+		gpio-controller;
+		#gpio-cells = <0x2>;
+		xlnx,gpio-width= <0x6>;
+	};
+};
+
+Device Tree Example: Full Reconfiguration to add PRR's
+======================================================
+
+The base FPGA Region is specified similar to the first example above.
+
+This example programs the FPGA to have two regions that can later be partially
+configured.  Each region has its own bridge in the FPGA fabric.
+
+DT Overlay contains:
+
+/dts-v1/;
+/plugin/;
+
+&fpga_region0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "base.rbf";
+
+	fpga-bridge@4400 {
+		compatible = "altr,freeze-bridge-controller";
+		reg = <0x4400 0x10>;
+
+		fpga_region1: fpga-region1 {
+			compatible = "fpga-region";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			ranges;
+		};
+	};
+
+	fpga-bridge@4420 {
+		compatible = "altr,freeze-bridge-controller";
+		reg = <0x4420 0x10>;
+
+		fpga_region2: fpga-region2 {
+			compatible = "fpga-region";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			ranges;
+		};
+	};
+};
+
+Device Tree Example: Partial Reconfiguration
+============================================
+
+This example reprograms one of the PRR's set up in the previous example.
+
+The sequence that occurs when this overlay is similar to the above, the only
+differences are that the FPGA is partially reconfigured due to the
+"partial-fpga-config" boolean and the only bridge that is controlled during
+programming is the FPGA based bridge of fpga_region1.
+
+/dts-v1/;
+/plugin/;
+
+&fpga_region1 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	firmware-name = "soc_image2.rbf";
+	partial-fpga-config;
+
+	gpio@10040 {
+		compatible = "altr,pio-1.0";
+		reg = <0x10040 0x20>;
+		clocks = <0x2>;
+		altr,ngpio = <0x4>;
+		#gpio-cells = <0x2>;
+		gpio-controller;
+	};
+};
+
+Constraints
+===========
+
+It is beyond the scope of this document to fully describe all the FPGA design
+constraints required to make partial reconfiguration work[1] [2] [3], but a few
+deserve quick mention.
+
+A persona must have boundary connections that line up with those of the partition
+or region it is designed to go into.
+
+During programming, transactions through those connections must be stopped and
+the connections must be held at a fixed logic level.  This can be achieved by
+FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+--
+[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
new file mode 100644
index 0000000000..0f874137ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
@@ -0,0 +1,18 @@
+Intel Stratix10 SoC FPGA Manager
+
+Required properties:
+The fpga_mgr node has the following mandatory property, must be located under
+firmware/svc node.
+
+- compatible : should contain "intel,stratix10-soc-fpga-mgr" or
+	       "intel,agilex-soc-fpga-mgr"
+
+Example:
+
+	firmware {
+		svc {
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
new file mode 100644
index 0000000000..164331eb62
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice Slave SPI sysCONFIG FPGA manager
+
+maintainers:
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
+
+description: |
+  Lattice sysCONFIG port, which is used for FPGA configuration, among others,
+  have Slave Serial Peripheral Interface. Only full reconfiguration is
+  supported.
+
+  Programming of ECP5 is done by writing uncompressed bitstream image in .bit
+  format into FPGA's SRAM configuration memory.
+
+properties:
+  compatible:
+    enum:
+      - lattice,sysconfig-ecp5
+
+  reg:
+    maxItems: 1
+
+  program-gpios:
+    description:
+      A GPIO line connected to PROGRAMN (active low) pin of the device.
+      Initiates configuration sequence.
+    maxItems: 1
+
+  init-gpios:
+    description:
+      A GPIO line connected to INITN (active low) pin of the device.
+      Indicates that the FPGA is ready to be configured.
+    maxItems: 1
+
+  done-gpios:
+    description:
+      A GPIO line connected to DONE (active high) pin of the device.
+      Indicates that the configuration sequence is complete.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: lattice,sysconfig-ecp5
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 60000000
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga-mgr@0 {
+            compatible = "lattice,sysconfig-ecp5";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+            init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+            done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
new file mode 100644
index 0000000000..4dc412437b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
@@ -0,0 +1,21 @@
+Lattice iCE40 FPGA Manager
+
+Required properties:
+- compatible:		Should contain "lattice,ice40-fpga-mgr"
+- reg:			SPI chip select
+- spi-max-frequency:	Maximum SPI frequency (>=1000000, <=25000000)
+- cdone-gpios:		GPIO input connected to CDONE pin
+- reset-gpios:		Active-low GPIO output connected to CRESET_B pin. Note
+			that unless the GPIO is held low during startup, the
+			FPGA will enter Master SPI mode and drive SCK with a
+			clock signal potentially jamming other devices on the
+			bus until the firmware is loaded.
+
+Example:
+	fpga: fpga@0 {
+		compatible = "lattice,ice40-fpga-mgr";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/fpga/lattice-machxo2-spi.txt b/Documentation/devicetree/bindings/fpga/lattice-machxo2-spi.txt
new file mode 100644
index 0000000000..a8c362eb16
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice-machxo2-spi.txt
@@ -0,0 +1,29 @@
+Lattice MachXO2 Slave SPI FPGA Manager
+
+Lattice MachXO2 FPGAs support a method of loading the bitstream over
+'slave SPI' interface.
+
+See 'MachXO2ProgrammingandConfigurationUsageGuide.pdf' on www.latticesemi.com
+
+Required properties:
+- compatible: should contain "lattice,machxo2-slave-spi"
+- reg: spi chip select of the FPGA
+
+Example for full FPGA configuration:
+
+	fpga-region0 {
+		compatible = "fpga-region";
+		fpga-mgr = <&fpga_mgr_spi>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+	};
+
+	spi1: spi@2000 {
+        ...
+
+		fpga_mgr_spi: fpga-mgr@0 {
+			compatible = "lattice,machxo2-slave-spi";
+			spi-max-frequency = <8000000>;
+			reg = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
new file mode 100644
index 0000000000..a157eecfb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/microchip,mpf-spi-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire FPGA manager.
+
+maintainers:
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
+
+description:
+  Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to
+  load the bitstream in .dat format.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpf-spi-fpga-mgr
+
+  reg:
+    description: SPI chip select
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fpga_mgr@0 {
+                    compatible = "microchip,mpf-spi-fpga-mgr";
+                    spi-max-frequency = <20000000>;
+                    reg = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
new file mode 100644
index 0000000000..04dcadc2c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xilinx-zynq-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq FPGA Manager
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,zynq-devcfg-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access to SLCR registers
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    devcfg: devcfg@f8007000 {
+      compatible = "xlnx,zynq-devcfg-1.0";
+      reg = <0xf8007000 0x100>;
+      interrupts = <0 8 4>;
+      clocks = <&clkc 12>;
+      clock-names = "ref_clk";
+      syscon = <&slcr>;
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
new file mode 100644
index 0000000000..614d86ad82
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Slave Serial SPI FPGA
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
+  over what is referred to as slave serial interface.The slave serial link is
+  not technically SPI, and might require extra circuits in order to play nicely
+  with other SPI slaves on the same bus.
+
+  Datasheets:
+    https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+    https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,fpga-slave-serial
+
+  spi-cpha: true
+
+  spi-max-frequency:
+    maximum: 60000000
+
+  reg:
+    maxItems: 1
+
+  prog_b-gpios:
+    description:
+      config pin (referred to as PROGRAM_B in the manual)
+    maxItems: 1
+
+  done-gpios:
+    description:
+      config status pin (referred to as DONE in the manual)
+    maxItems: 1
+
+  init-b-gpios:
+    description:
+      initialization status and configuration error pin
+      (referred to as INIT_B in the manual)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - prog_b-gpios
+  - done-gpios
+  - init-b-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      fpga_mgr_spi: fpga-mgr@0 {
+        compatible = "xlnx,fpga-slave-serial";
+        spi-max-frequency = <60000000>;
+        spi-cpha;
+        reg = <0>;
+        prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+        init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+        done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
new file mode 100644
index 0000000000..a7d4b8e59e
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
+  decouplers/fpga bridges. The controller can decouple/disable the bridges
+  which prevents signal changes from passing through the bridge. The controller
+  can also couple / enable the bridges which allows traffic to pass through the
+  bridge normally.
+  Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager Softcore
+  is compatible with the Xilinx LogiCORE pr-decoupler. The Dynamic Function
+  eXchange AXI shutdown manager prevents AXI traffic from passing through the
+  bridge. The controller safely handles AXI4MM and AXI4-Lite interfaces on a
+  Reconfigurable Partition when it is undergoing dynamic reconfiguration,
+  preventing the system deadlock that can occur if AXI transactions are
+  interrupted by DFX.
+  Please refer to fpga-region.txt and fpga-bridge.txt in this directory for
+  common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: xlnx,pr-decoupler-1.00
+          - const: xlnx,pr-decoupler
+      - items:
+          - const: xlnx,dfx-axi-shutdown-manager-1.00
+          - const: xlnx,dfx-axi-shutdown-manager
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+      compatible = "xlnx,pr-decoupler-1.00", "xlnx,pr-decoupler";
+      reg = <0x10000045 0x10>;
+      clocks = <&clkc 15>;
+      clock-names = "aclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
new file mode 100644
index 0000000000..26f18834ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,versal-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal FPGA driver.
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  Device Tree Versal FPGA bindings for the Versal SoC, controlled
+  using firmware interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,versal-fpga
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    versal_fpga: versal_fpga {
+         compatible = "xlnx,versal-fpga";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
new file mode 100644
index 0000000000..1390ae103b
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
+  The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+  configure the Programmable Logic (PL). The configuration uses the
+  firmware interface.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-pcap-fpga
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        zynqmp_pcap: pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
new file mode 100644
index 0000000000..9853fefff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
@@ -0,0 +1,36 @@
+Device-tree bindings for AST2600 FSI master
+-------------------------------------------
+
+The AST2600 contains two identical FSI masters. They share a clock and have a
+separate interrupt line and output pins.
+
+Required properties:
+ - compatible: "aspeed,ast2600-fsi-master"
+ - reg: base address and length
+ - clocks: phandle and clock number
+ - interrupts: platform dependent interrupt description
+ - pinctrl-0: phandle to pinctrl node
+ - pinctrl-names: pinctrl state
+
+Optional properties:
+ - cfam-reset-gpios: GPIO for CFAM reset
+
+ - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
+ - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
+
+
+Examples:
+
+    fsi-master {
+        compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+        reg = <0x1e79b000 0x94>;
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fsi1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
new file mode 100644
index 0000000000..3dc752db74
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
@@ -0,0 +1,36 @@
+Device-tree bindings for ColdFire offloaded gpio-based FSI master driver
+------------------------------------------------------------------------
+
+Required properties:
+ - compatible =
+	"aspeed,ast2400-cf-fsi-master" for an AST2400 based system
+   or
+	"aspeed,ast2500-cf-fsi-master" for an AST2500 based system
+
+ - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
+ - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
+                                          functions (eg, external FSI masters)
+ - memory-region = <phandle>;		: Reference to the reserved memory for
+                                          the ColdFire. Must be 2M aligned on
+					  AST2400 and 1M aligned on AST2500
+ - aspeed,sram = <phandle>;		: Reference to the SRAM node.
+ - aspeed,cvic = <phandle>;		: Reference to the CVIC node.
+
+Examples:
+
+    fsi-master {
+        compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+
+	clock-gpios = <&gpio 0>;
+        data-gpios = <&gpio 1>;
+        enable-gpios = <&gpio 2>;
+        trans-gpios = <&gpio 3>;
+        mux-gpios = <&gpio 4>;
+
+	memory-region = <&coldfire_memory>;
+	aspeed,sram = <&sram>;
+	aspeed,cvic = <&cvic>;
+    }
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000000..1e44245074
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,28 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "fsi-master-gpio";
+ - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
+
+Optional properties:
+ - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
+                                          functions (eg, external FSI masters)
+ - no-gpio-delays;			: Don't add extra delays between GPIO
+                                          accesses. This is useful when the HW
+					  GPIO block is running at a low enough
+					  frequency.
+
+Examples:
+
+    fsi-master {
+        compatible = "fsi-master-gpio", "fsi-master";
+        clock-gpios = <&gpio 0>;
+        data-gpios = <&gpio 1>;
+        enable-gpios = <&gpio 2>;
+        trans-gpios = <&gpio 3>;
+        mux-gpios = <&gpio 4>;
+    }
diff --git a/Documentation/devicetree/bindings/fsi/fsi.txt b/Documentation/devicetree/bindings/fsi/fsi.txt
new file mode 100644
index 0000000000..afb4eccab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi.txt
@@ -0,0 +1,156 @@
+FSI bus & engine generic device tree bindings
+=============================================
+
+The FSI bus is probe-able, so the OS is able to enumerate FSI slaves, and
+engines within those slaves. However, we have a facility to match devicetree
+nodes to probed engines. This allows for fsi engines to expose non-probeable
+busses, which are then exposed by the device tree. For example, an FSI engine
+that is an I2C master - the I2C bus can be described by the device tree under
+the engine's device tree node.
+
+FSI masters may require their own DT nodes (to describe the master HW itself);
+that requirement is defined by the master's implementation, and is described by
+the fsi-master-* binding specifications.
+
+Under the masters' nodes, we can describe the bus topology using nodes to
+represent the FSI slaves and their slave engines. As a basic outline:
+
+  fsi-master {
+      /* top-level of FSI bus topology, bound to an FSI master driver and
+       * exposes an FSI bus */
+
+      fsi-slave@<link,id> {
+          /* this node defines the FSI slave device, and is handled
+           * entirely with FSI core code */
+
+          fsi-slave-engine@<addr> {
+              /* this node defines the engine endpoint & address range, which
+               * is bound to the relevant fsi device driver */
+               ...
+          };
+
+          fsi-slave-engine@<addr> {
+              ...
+          };
+
+      };
+  };
+
+Note that since the bus is probe-able, some (or all) of the topology may
+not be described; this binding only provides an optional facility for
+adding subordinate device tree nodes as children of FSI engines.
+
+FSI masters
+-----------
+
+FSI master nodes declare themselves as such with the "fsi-master" compatible
+value. It's likely that an implementation-specific compatible value will
+be needed as well, for example:
+
+    compatible = "fsi-master-gpio", "fsi-master";
+
+Since the master nodes describe the top-level of the FSI topology, they also
+need to declare the FSI-standard addressing scheme. This requires two cells for
+addresses (link index and slave ID), and no size:
+
+    #address-cells = <2>;
+    #size-cells = <0>;
+
+An optional boolean property can be added to indicate that a particular master
+should not scan for connected devices at initialization time.  This is
+necessary in cases where a scan could cause arbitration issues with other
+masters that may be present on the bus.
+
+    no-scan-on-init;
+
+FSI slaves
+----------
+
+Slaves are identified by a (link-index, slave-id) pair, so require two cells
+for an address identifier. Since these are not a range, no size cells are
+required. For an example, a slave on link 1, with ID 2, could be represented
+as:
+
+    cfam@1,2 {
+        reg = <1 2>;
+	[...];
+    }
+
+Each slave provides an address-space, under which the engines are accessible.
+That address space has a maximum of 23 bits, so we use one cell to represent
+addresses and sizes in the slave address space:
+
+    #address-cells = <1>;
+    #size-cells = <1>;
+
+Optionally, a slave can provide a global unique chip ID which is used to
+identify the physical location of the chip in a system specific way
+
+    chip-id = <0>;
+
+FSI engines (devices)
+---------------------
+
+Engines are identified by their address under the slaves' address spaces. We
+use a single cell for address and size. Engine nodes represent the endpoint
+FSI device, and are passed to those FSI device drivers' ->probe() functions.
+
+For example, for a slave using a single 0x400-byte page starting at address
+0xc00:
+
+    engine@c00 {
+        reg = <0xc00 0x400>;
+    };
+
+
+Full example
+------------
+
+Here's an example that illustrates:
+ - an FSI master
+   - connected to an FSI slave
+     - that contains an engine that is an I2C master
+       - connected to an I2C EEPROM
+
+The FSI master may be connected to additional slaves, and slaves may have
+additional engines, but they don't necessarily need to be describe in the
+device tree if no extra platform information is required.
+
+    /* The GPIO-based FSI master node, describing the top level of the
+     * FSI bus
+     */
+    gpio-fsi {
+        compatible = "fsi-master-gpio", "fsi-master";
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        /* A FSI slave (aka. CFAM) at link 0, ID 0. */
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+	    chip-id = <0>;
+
+            /* FSI engine at 0xc00, using a single page. In this example,
+             * it's an I2C master controller, so subnodes describe the
+             * I2C bus.
+             */
+            i2c-controller@c00 {
+                reg = <0xc00 0x400>;
+
+                /* Engine-specific data. In this case, we're describing an
+                 * I2C bus, so we're conforming to the generic I2C binding
+                 */
+                compatible = "some-vendor,fsi-i2c-controller";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                /* I2C endpoint device: an Atmel EEPROM */
+                eeprom@50 {
+                    compatible = "atmel,24c256";
+                    reg = <0x50>;
+                    pagesize = <64>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
new file mode 100644
index 0000000000..e2ca0b0004
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,fsi2spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SPI controllers
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
+  node will always be a child of an FSI CFAM node; see fsi.txt for details on
+  FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
+  SPI controllers.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2spi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fsi2spi@1c00 {
+        compatible = "ibm,fsi2spi";
+        reg = <0x1c00 0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
new file mode 100644
index 0000000000..442cecdc57
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM I2C Responder virtual FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM
+  (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and
+  writes or SCOM operations, thereby acting as an FSI master.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2cr-fsi-master
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2cr@20 {
+        compatible = "ibm,i2cr-fsi-master";
+        reg = <0x20>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
new file mode 100644
index 0000000000..e73358075a
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
@@ -0,0 +1,16 @@
+Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
+-----------------------------------------------------------------------------
+
+This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
+a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
+nodes. The OCC is not an FSI slave device itself, rather it is accessed
+through the SBE FIFO.
+
+Required properties:
+ - compatible = "ibm,p9-occ" or "ibm,p10-occ"
+
+Examples:
+
+    occ {
+        compatible = "ibm,p9-occ";
+    };
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
new file mode 100644
index 0000000000..02f0b04623
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/nvidia,tegra20-fuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra FUSE block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra210-efuse
+          - nvidia,tegra186-efuse
+          - nvidia,tegra194-efuse
+          - nvidia,tegra234-efuse
+
+      - items:
+          - const: nvidia,tegra132-efuse
+          - const: nvidia,tegra124-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fuse
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: fuse
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra132-efuse
+          - nvidia,tegra210-efuse
+then:
+  required:
+    - resets
+    - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    fuse@7000f800 {
+        compatible = "nvidia,tegra20-efuse";
+        reg = <0x7000f800 0x400>;
+        clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+        clock-names = "fuse";
+        resets = <&tegra_car 39>;
+        reset-names = "fuse";
+    };
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 0000000000..c21549e0fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Broadcom GPS chips can be used over the UART or I2C bus. The UART
+  bus requires CTS/RTS support. The number of the capsule is more
+  elaborate than the compatibles BCM4751 may be printed
+  BCM4751IFBG for example.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4751
+      - brcm,bcm4752
+      - brcm,bcm4753
+
+  reg:
+    description:
+      The I2C Address, not required on UART buses.
+
+  vdd-auxin-supply:
+    description:
+      Main voltage supply, pin name VDD_AUXIN, typically connected
+      directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+  vddio-supply:
+    description:
+      IO voltage supply, pin name VDDIO, typically 1.8V
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  enable-gpios:
+    description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+      If the line is active low such as NSTANDBY, it should be tagged
+      GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "brcm,bcm4751";
+            vdd-auxin-supply = <&vbat>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
new file mode 100644
index 0000000000..963b926e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Global Navigation Satellite Systems (GNSS)
+  receiver devices
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: |
+  This document defines device tree properties common to Global Navigation
+  Satellite System receivers.
+
+properties:
+  $nodename:
+    pattern: "^gnss(@.*)?$"
+
+  lna-supply:
+    description: A separate regulator supplying power for the Low Noise
+      Amplifier (LNA). This is an amplifier connected between the GNSS
+      device and the receiver antenna.
+
+  enable-gpios:
+    description: A GPIO line that will enable the GNSS receiver when
+      asserted. If this line is active low, the GPIO phandle should
+      consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
+      system can rely on asserting the line to enable the GNSS device.
+    maxItems: 1
+
+  timepulse-gpios:
+    description: When a timepulse is provided to the GNSS device using a
+      GPIO line, this is used.
+    maxItems: 1
+
+  current-speed:
+    description: The baudrate in bits per second of the device as it comes
+      online, current active speed.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      gnss {
+        compatible = "u-blox,neo-8";
+        vcc-supply = <&gnss_reg>;
+        timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+        current-speed = <4800>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 0000000000..c0eb35beb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  Mediatek chipsets are used in GNSS-receiver modules produced by several
+  vendors and can use a UART interface.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    const: globaltop,pa6h
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin name VCC.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional reset line, with names such as RESET or NRESET.
+      If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+  timepulse-gpios:
+    description: Comes with pin names such as PPS1 or 1PPS.
+
+  gnss-fix-gpios:
+    maxItems: 1
+    description: GPIO used to determine device position fix state, pin names
+      FIX or 3D_FIX.
+
+  vbackup-supply:
+    description:
+      Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "globaltop,pa6h";
+            vcc-supply = <&vcc_3v3>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
new file mode 100644
index 0000000000..0bbe684d82
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  The SiRFstar GNSS receivers have incarnated over the years in different
+  chips, starting from the SiRFstarIII which was a chip that was introduced in
+  2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+  by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+  acquired by Samsung, while some products remained with CSR. In 2014 CSR
+  was acquired by Qualcomm who still sell some of the SiRF products.
+
+  SiRF chips can be used over UART, I2C or SPI buses.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - csr,gsd4t
+      - csr,csrg05ta03-icje-r
+      - fastrax,uc430
+      - linx,r4
+      - wi2wi,w2sg0004
+      - wi2wi,w2sg0008i
+      - wi2wi,w2sg0084i
+
+  reg:
+    description:
+      The I2C Address, SPI chip select address. Not required on UART buses.
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  sirf,onoff-gpios:
+    maxItems: 1
+    description: GPIO used to power on and off device, pin name ON_OFF.
+
+  sirf,wakeup-gpios:
+    maxItems: 1
+    description: GPIO used to determine device power state, pin names such
+      as RFPWRUP, WAKEUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "wi2wi,w2sg0084i";
+            vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
new file mode 100644
index 0000000000..4835a280b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-blox GNSS Receiver
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: >
+  The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+
+properties:
+  compatible:
+    enum:
+      - u-blox,neo-6m
+      - u-blox,neo-8
+      - u-blox,neo-m8
+
+  reg:
+    description: >
+      The DDC Slave Address, SPI chip select address, the number of the USB hub
+      port or the USB host-controller port to which this device is attached,
+      depending on the bus used. Required for the DDC, SPI or USB busses.
+
+  vcc-supply:
+    description: >
+      Main voltage regulator
+
+  u-blox,extint-gpios:
+    maxItems: 1
+    description: >
+      GPIO connected to the "external interrupt" input pin
+
+  v-bckp-supply:
+    description: >
+      Backup voltage regulator
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial {
+        gnss {
+            compatible = "u-blox,neo-8";
+            v-bckp-supply = <&gnss_v_bckp_reg>;
+            vcc-supply = <&gnss_vcc_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/goldfish/audio.txt b/Documentation/devicetree/bindings/goldfish/audio.txt
new file mode 100644
index 0000000000..d043fda433
--- /dev/null
+++ b/Documentation/devicetree/bindings/goldfish/audio.txt
@@ -0,0 +1,17 @@
+Android Goldfish Audio
+
+Android goldfish audio device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-audio" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_audio@9030000 {
+		compatible = "google,goldfish-audio";
+		reg = <0x9030000 0x100>;
+		interrupts = <0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/goldfish/battery.txt b/Documentation/devicetree/bindings/goldfish/battery.txt
new file mode 100644
index 0000000000..4fb6139332
--- /dev/null
+++ b/Documentation/devicetree/bindings/goldfish/battery.txt
@@ -0,0 +1,17 @@
+Android Goldfish Battery
+
+Android goldfish battery device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-battery" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_battery@9020000 {
+		compatible = "google,goldfish-battery";
+		reg = <0x9020000 0x1000>;
+		interrupts = <0x3>;
+	};
diff --git a/Documentation/devicetree/bindings/goldfish/events.txt b/Documentation/devicetree/bindings/goldfish/events.txt
new file mode 100644
index 0000000000..5babf46317
--- /dev/null
+++ b/Documentation/devicetree/bindings/goldfish/events.txt
@@ -0,0 +1,17 @@
+Android Goldfish Events Keypad
+
+Android goldfish events keypad device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-events-keypad" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish-events@9040000 {
+		compatible = "google,goldfish-events-keypad";
+		reg = <0x9040000 0x1000>;
+		interrupts = <0x5>;
+	};
diff --git a/Documentation/devicetree/bindings/goldfish/pipe.txt b/Documentation/devicetree/bindings/goldfish/pipe.txt
new file mode 100644
index 0000000000..e417a31a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/goldfish/pipe.txt
@@ -0,0 +1,17 @@
+Android Goldfish QEMU Pipe
+
+Andorid pipe virtual device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,android-pipe" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	android_pipe@a010000 {
+		compatible = "google,android-pipe";
+		reg = <ff018000 0x2000>;
+		interrupts = <0x12>;
+	};
diff --git a/Documentation/devicetree/bindings/goldfish/tty.txt b/Documentation/devicetree/bindings/goldfish/tty.txt
new file mode 100644
index 0000000000..82648278da
--- /dev/null
+++ b/Documentation/devicetree/bindings/goldfish/tty.txt
@@ -0,0 +1,17 @@
+Android Goldfish TTY
+
+Android goldfish tty device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-tty" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_tty@1f004000 {
+		compatible = "google,goldfish-tty";
+		reg = <0x1f004000 0x1000>;
+		interrupts = <0xc>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
new file mode 100644
index 0000000000..973362eb3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
@@ -0,0 +1,72 @@
+GPIO controllers on MPC8xxx SoCs
+
+This is for the non-QE/CPM/GUTs GPIO controllers as found on
+8349, 8572, 8610 and compatible.
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
+
+Required properties:
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
+
+Example of gpio-controller nodes for a MPC8347 SoC:
+
+	gpio1: gpio-controller@c00 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+		reg = <0xc00 0x100>;
+		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpio2: gpio-controller@d00 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
+		reg = <0xd00 0x100>;
+		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
+		gpio-controller;
+	};
+
+Example of a peripheral using the GPIO module as an IRQ controller:
+
+	funkyfpga@0 {
+		compatible = "funky-fpga";
+		...
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
new file mode 100644
index 0000000000..ce19c5660a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -0,0 +1,35 @@
+* Abilis TB10x GPIO controller
+
+Required Properties:
+- compatible: Should be "abilis,tb10x-gpio"
+- reg: Address and length of the register set for the device
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+- abilis,ngpio: the number of GPIO pins this driver controls.
+
+Optional Properties:
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
+- interrupts: Defines the interrupt line connecting this GPIO controller to
+  its parent interrupt controller.
+
+GPIO ranges are specified as described in
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	gpioa: gpio@ff140000 {
+		compatible = "abilis,tb10x-gpio";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&tb10x_ictl>;
+		interrupts = <27 2>;
+		reg = <0xFF140000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		abilis,ngpio = <3>;
+		gpio-ranges = <&iomux 0 0 0>;
+		gpio-ranges-group-names = "gpioa_pins";
+	};
diff --git a/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml
new file mode 100644
index 0000000000..25b3198c4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/adi,ds4520-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DS4520 I2C GPIO expander
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,ds4520-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 9
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@50 {
+            compatible = "adi,ds4520-gpio";
+            reg = <0x50>;
+            ngpios = <9>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 0000000000..7c41d8e814
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
new file mode 100644
index 0000000000..46bb121360
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SGPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description:
+  This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+  AST2600 have two sgpio master one with 128 pins another one with 80 pins,
+  AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
+  GPIO pins can be programmed to support the following options
+  - Support interrupt option for each input port and various interrupt
+    sensitivity option (level-high, level-low, edge-high, edge-low)
+  - Support reset tolerance option for each output port
+  - Directly connected to APB bus and its shift clock is from APB bus clock
+    divided by a programmable value.
+  - Co-work with external signal-chained TTL components (74LV165/74LV595)
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sgpio
+      - aspeed,ast2500-sgpio
+      - aspeed,ast2600-sgpiom
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  ngpios: true
+
+  bus-frequency: true
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-controller
+  - ngpios
+  - clocks
+  - bus-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sgpio: sgpio@1e780200 {
+        #gpio-cells = <2>;
+        compatible = "aspeed,ast2500-sgpio";
+        gpio-controller;
+        interrupts = <40>;
+        reg = <0x1e780200 0x0100>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        interrupt-controller;
+        ngpios = <80>;
+        bus-frequency = <12000000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
new file mode 100644
index 0000000000..62fcc2bd5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63xx GPIO controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+  are the only ones which don't need a pinctrl driver.
+
+  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
+  and dirout registers, where GPIO state can be read and/or written, and the
+  direction changed from input to output.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-gpio
+      - brcm,bcm6328-gpio
+      - brcm,bcm6358-gpio
+      - brcm,bcm6362-gpio
+      - brcm,bcm6368-gpio
+      - brcm,bcm63268-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  native-endian: true
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: dirout
+      - const: dat
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@0 {
+      compatible = "brcm,bcm63268-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0x0 0x8>, <0x8 0x8>;
+
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 52>;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
new file mode 100644
index 0000000000..4a896ff7ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB "UPG GIO" GPIO controller
+
+description: >
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7445-gpio
+      - const: brcm,brcmstb-gpio
+
+  reg:
+    maxItems: 1
+    description: >
+      Define the base and range of the I/O address space containing
+      the brcmstb GPIO controller registers
+
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number (within the controller's
+      pin space), and the second is used for the following:
+      bit[0]: polarity (0 for active-high, 1 for active-low)
+
+  gpio-controller: true
+
+  brcm,gpio-bank-widths:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Number of GPIO lines for each bank.  Number of elements must
+      correspond to number of banks suggested by the 'reg' property.
+
+  interrupts:
+    maxItems: 1
+    description: >
+      The interrupt shared by all GPIO lines for this controller.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the GPIO number, the second should specify
+      flags.  The following subset of flags is supported:
+      - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+
+  interrupt-controller: true
+
+  wakeup-source:
+    type: boolean
+    description: >
+      GPIOs for this controller can be used as a wakeup source
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "brcm,gpio-bank-widths"
+
+additionalProperties: false
+
+examples:
+  - |
+    upg_gio: gpio@f040a700 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf040a700 0x80>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x6>;
+        brcm,gpio-bank-widths = <32 32 32 24>;
+    };
+
+    upg_gio_aon: gpio@f04172c0 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf04172c0 0x40>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupts = <0x6>;
+        wakeup-source;
+        brcm,gpio-bank-widths = <18 4>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml
new file mode 100644
index 0000000000..296fdd6b8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family GPIO controller
+
+description:
+  The Broadcom GPIO Controller IP can be configured prior to synthesis to
+  support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
+  GPIO controller only supports edge, not level, triggering of interrupts.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-gpio
+          - brcm,bcm21664-gpio
+          - brcm,bcm23550-gpio
+      - const: brcm,kona-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 6
+    description:
+      The interrupt outputs from the controller. There is one GPIO interrupt
+      per GPIO bank. The number of interrupts listed depends on the number of
+      GPIO banks on the SoC. The interrupts must be ordered by bank, starting
+      with bank 0. There is always a 1:1 mapping between banks and IRQs.
+
+  '#gpio-cells':
+    const: 2
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#gpio-cells'
+  - '#interrupt-cells'
+  - gpio-controller
+  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm21664-gpio
+              - brcm,bcm23550-gpio
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@35003000 {
+        compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+        reg = <0x35003000 0x800>;
+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
new file mode 100644
index 0000000000..c213cb9ddb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,xgs-iproc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom XGS iProc GPIO controller
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description: |
+  This controller is the Chip Common A GPIO present on a number of Broadcom
+  switch ASICs with integrated SoCs.
+
+properties:
+  compatible:
+    const: brcm,iproc-gpio-cca
+
+  reg:
+    items:
+      - description: the I/O address containing the GPIO controller registers.
+      - description: the I/O address containing the Chip Common A interrupt registers.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: [ interrupts ]
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio@18000060 {
+        compatible = "brcm,iproc-gpio-cca";
+        #gpio-cells = <2>;
+        reg = <0x18000060 0x50>,
+              <0x18000000 0x50>;
+        ngpios = <12>;
+        gpio-controller;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
new file mode 100644
index 0000000000..9d6dcd3fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
@@ -0,0 +1,49 @@
+* General Purpose Input Output (GPIO) bus.
+
+Properties:
+- compatible: "cavium,octeon-3860-gpio"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the GPIO unit's register bank.
+
+- gpio-controller: This is a GPIO controller.
+
+- #gpio-cells: Must be <2>.  The first cell is the GPIO pin.
+
+- interrupt-controller: The GPIO controller is also an interrupt
+  controller, many of its pins may be configured as an interrupt
+  source.
+
+- #interrupt-cells: Must be <2>.  The first cell is the GPIO pin
+   connected to the interrupt source.  The second cell is the interrupt
+   triggering protocol and may have one of four values:
+   1 - edge triggered on the rising edge.
+   2 - edge triggered on the falling edge
+   4 - level triggered active high.
+   8 - level triggered active low.
+
+- interrupts: Interrupt routing for each pin.
+
+Example:
+
+	gpio-controller@1070000000800 {
+		#gpio-cells = <2>;
+		compatible = "cavium,octeon-3860-gpio";
+		reg = <0x10700 0x00000800 0x0 0x100>;
+		gpio-controller;
+		/* Interrupts are specified by two parts:
+		 * 1) GPIO pin number (0..15)
+		 * 2) Triggering (1 - edge rising
+		 *		  2 - edge falling
+		 *		  4 - level active high
+		 *		  8 - level active low)
+		 */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		/* The GPIO pin connect to 16 consecutive CUI bits */
+		interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+			     <0 20>, <0 21>, <0 22>, <0 23>,
+			     <0 24>, <0 25>, <0 26>, <0 27>,
+			     <0 28>, <0 29>, <0 30>, <0 31>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
new file mode 100644
index 0000000000..706ef00f5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
@@ -0,0 +1,43 @@
+Cadence GPIO controller bindings
+
+Required properties:
+- compatible: should be "cdns,gpio-r1p02".
+- reg: the register base address and size.
+- #gpio-cells: should be 2.
+	* first cell is the GPIO number.
+	* second cell specifies the GPIO flags, as defined in
+		<dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
+		and GPIO_ACTIVE_LOW flags are supported.
+- gpio-controller: marks the device as a GPIO controller.
+- clocks: should contain one entry referencing the peripheral clock driving
+	the GPIO controller.
+
+Optional properties:
+- ngpios: integer number of gpio lines supported by this controller, up to 32.
+- interrupts: interrupt specifier for the controllers interrupt.
+- interrupt-controller: marks the device as an interrupt controller. When
+	defined, interrupts, interrupt-parent and #interrupt-cells
+	are required.
+- interrupt-cells: should be 2.
+	* first cell is the GPIO number you want to use as an IRQ source.
+	* second cell specifies the IRQ type, as defined in
+		<dt-bindings/interrupt-controller/irq.h>.
+		Currently only level sensitive IRQs are supported.
+
+
+Example:
+	gpio0: gpio-controller@fd060000 {
+		compatible = "cdns,gpio-r1p02";
+		reg =<0xfd060000 0x1000>;
+
+		clocks = <&gpio_clk>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
new file mode 100644
index 0000000000..fd42e7280f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
@@ -0,0 +1,17 @@
+* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
+
+Required properties:
+- compatible: Should contain "cirrus,ep7209-mctrl-gpio".
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = Active high,
+    1 = Active low.
+
+Example:
+	sysgpio: sysgpio {
+		compatible = "cirrus,ep7312-mctrl-gpio",
+			     "cirrus,ep7209-mctrl-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
new file mode 100644
index 0000000000..e3e668a120
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/delta,tn48m-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD GPIO controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Delta TN48M has an onboard Lattice CPLD that is used as an GPIO expander.
+  It provides 12 pins in total, they are input-only or ouput-only type.
+
+properties:
+  compatible:
+    enum:
+      - delta,tn48m-gpo
+      - delta,tn48m-gpi
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
new file mode 100644
index 0000000000..c0ad70e66f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic 8-bit shift register
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - fairchild,74hc595
+      - nxp,74lvc594
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The second cell is only used to specify the GPIO polarity.
+    const: 2
+
+  registers-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of daisy-chained shift registers
+
+  enable-gpios:
+    description: GPIO connected to the OE (Output Enable) pin.
+    maxItems: 1
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+
+    properties:
+      gpio-hog: true
+      gpios: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - registers-number
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio5: gpio5@0 {
+                    compatible = "fairchild,74hc595";
+                    reg = <0>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    registers-number = <4>;
+                    spi-max-frequency = <100000>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
new file mode 100644
index 0000000000..640da5b9b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/faraday,ftgpio010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGPIO010 GPIO Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-gpio
+          - const: faraday,ftgpio010
+      - items:
+          - const: moxa,moxart-gpio
+          - const: faraday,ftgpio010
+      - const: faraday,ftgpio010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the interrupt line for the GPIO block
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@4d000000 {
+      compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+      reg = <0x4d000000 0x100>;
+      interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
new file mode 100644
index 0000000000..65b6970e42
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fcs,fxl6408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild FXL6408 I2C GPIO Expander
+
+maintainers:
+  - Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
+
+properties:
+  compatible:
+    enum:
+      - fcs,fxl6408
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio_expander_43: gpio-expander@43 {
+            compatible = "fcs,fxl6408";
+            reg = <0x43>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "Wi-Fi_W_DISABLE", "Wi-Fi_WKUP_WLAN",
+                              "PWR_EN_+V3.3_WiFi_N", "PCIe_REF_CLK_EN",
+                              "USB_RESET_N", "USB_BYPASS_N", "Wi-Fi_PDn",
+                              "Wi-Fi_WKUP_BT";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
new file mode 100644
index 0000000000..b7b3222093
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,imx8qxp-sc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver over IMX SCU firmware API
+
+maintainers:
+  - Shenwei Wang <shenwei.wang@nxp.com>
+
+description: |
+  This module provides the standard interface to control the
+  resource pins in SCU domain on i.MX8 platforms.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-sc-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio {
+        compatible = "fsl,imx8qxp-sc-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
new file mode 100644
index 0000000000..d0ca2af89f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl-imx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX/MXC GPIO controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-gpio
+          - fsl,imx21-gpio
+          - fsl,imx31-gpio
+          - fsl,imx35-gpio
+          - fsl,imx7d-gpio
+      - items:
+          - const: fsl,imx35-gpio
+          - const: fsl,imx31-gpio
+      - items:
+          - enum:
+              - fsl,imx50-gpio
+              - fsl,imx51-gpio
+              - fsl,imx53-gpio
+              - fsl,imx6q-gpio
+              - fsl,imx6sl-gpio
+              - fsl,imx6sll-gpio
+              - fsl,imx6sx-gpio
+              - fsl,imx6ul-gpio
+              - fsl,imx7d-gpio
+              - fsl,imx8dxl-gpio
+              - fsl,imx8mm-gpio
+              - fsl,imx8mn-gpio
+              - fsl,imx8mp-gpio
+              - fsl,imx8mq-gpio
+              - fsl,imx8qm-gpio
+              - fsl,imx8qxp-gpio
+              - fsl,imxrt1050-gpio
+              - fsl,imxrt1170-gpio
+          - const: fsl,imx35-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Should be the port interrupt shared by all 32 pins, if one number.
+      If two numbers, the first one is the interrupt shared by low 16 pins
+      and the second one is for high 16 pins.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+  gpio-ranges: true
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@73f84000 {
+        compatible = "fsl,imx35-gpio";
+        reg = <0x73f84000 0x4000>;
+        interrupts = <50 51>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml
new file mode 100644
index 0000000000..d18d952854
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fujitsu,mb86s70-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu MB86S7x GPIO Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: socionext,synquacer-gpio
+          - const: fujitsu,mb86s70-gpio
+      - const: fujitsu,mb86s70-gpio
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@31000000 {
+        compatible = "fujitsu,mb86s70-gpio";
+        reg = <0x31000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clk 0 2 1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
new file mode 100644
index 0000000000..6e81f8b755
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
@@ -0,0 +1,20 @@
+Gateworks PLD GPIO controller bindings
+
+The GPIO controller should be a child node on an I2C bus,
+see: i2c/i2c.txt for details.
+
+Required properties:
+- compatible: Should be "gateworks,pld-gpio"
+- reg: I2C slave address
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the gpio number and
+  the second cell is used to specify optional parameters.
+
+Example:
+
+pld@56 {
+	compatible = "gateworks,pld-gpio";
+	reg = <0x56>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt b/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
new file mode 100644
index 0000000000..7bb1a9d601
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
@@ -0,0 +1,30 @@
+* 74XX MMIO GPIO driver
+
+Required properties:
+- compatible: Should contain one of the following:
+   "ti,741g125": for 741G125 (1-bit Input),
+   "ti,741g174": for 741G74 (1-bit Output),
+   "ti,742g125": for 742G125 (2-bit Input),
+   "ti,7474"   : for 7474 (2-bit Output),
+   "ti,74125"  : for 74125 (4-bit Input),
+   "ti,74175"  : for 74175 (4-bit Output),
+   "ti,74365"  : for 74365 (6-bit Input),
+   "ti,74174"  : for 74174 (6-bit Output),
+   "ti,74244"  : for 74244 (8-bit Input),
+   "ti,74273"  : for 74273 (8-bit Output),
+   "ti,741624" : for 741624 (16-bit Input),
+   "ti,7416374": for 7416374 (16-bit Output).
+- reg: Physical base address and length where IC resides.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+   the second cell is used to specify the GPIO polarity:
+    0 = Active High,
+    1 = Active Low.
+
+Example:
+	ctrl: gpio@30008004 {
+		compatible = "ti,74174";
+		reg = <0x30008004 0x1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
new file mode 100644
index 0000000000..a28902a65a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt
@@ -0,0 +1,33 @@
+Avionic Design N-bit GPIO expander bindings
+
+Required properties:
+- compatible: should be "ad,gpio-adnp"
+- reg: The I2C slave address for this device.
+- interrupts: Interrupt specifier for the controllers interrupt.
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+  second cell is used to specify optional parameters:
+  - bit 0: polarity (0: normal, 1: inverted)
+- gpio-controller: Marks the device as a GPIO controller
+- nr-gpios: The number of pins supported by the controller.
+
+The GPIO expander can optionally be used as an interrupt controller, in
+which case it uses the default two cell specifier as described in
+Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+Example:
+
+	gpioext: gpio-controller@41 {
+		compatible = "ad,gpio-adnp";
+		reg = <0x41>;
+
+		interrupt-parent = <&gpio>;
+		interrupts = <160 1>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		nr-gpios = <64>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
new file mode 100644
index 0000000000..2a80e272cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -0,0 +1,44 @@
+Altera GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "altr,pio-1.0"
+- reg: Physical base address and length of the controller's registers.
+- #gpio-cells : Should be 2
+  - The first cell is the gpio offset number.
+  - The second cell is reserved and is currently unused.
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller: Mark the device node as an interrupt controller
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
+  - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
+- interrupts: Specify the interrupt.
+- altr,interrupt-type: Specifies the interrupt trigger type the GPIO
+  hardware is synthesized. This field is required if the Altera GPIO controller
+  used has IRQ enabled as the interrupt type is not software controlled,
+  but hardware synthesized. Required if GPIO is used as an interrupt
+  controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
+  Only the following flags are supported:
+    IRQ_TYPE_EDGE_RISING
+    IRQ_TYPE_EDGE_FALLING
+    IRQ_TYPE_EDGE_BOTH
+    IRQ_TYPE_LEVEL_HIGH
+
+Optional properties:
+- altr,ngpio: Width of the GPIO bank. This defines how many pins the
+  GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not
+  specified.
+
+Example:
+
+gpio_altr: gpio@ff200000 {
+	compatible = "altr,pio-1.0";
+	reg = <0xff200000 0x10>;
+	interrupts = <0 45 4>;
+	altr,ngpio = <32>;
+	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
+	#gpio-cells = <2>;
+	gpio-controller;
+	#interrupt-cells = <2>;
+	interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
new file mode 100644
index 0000000000..b2033fc3a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -0,0 +1,39 @@
+Aspeed GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
+					or "aspeed,ast2600-gpio".
+
+- #gpio-cells 		: Should be two
+			  - First cell is the GPIO line number
+			  - Second cell is used to specify optional
+			    parameters (unused)
+
+- reg			: Address and length of the register set for the device
+- gpio-controller	: Marks the device node as a GPIO controller.
+- interrupts		: Interrupt specifier (see interrupt bindings for
+			  details)
+- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
+
+Optional properties:
+
+- clocks		: A phandle to the clock to use for debounce timings
+- ngpios		: Number of GPIOs controlled by this controller. Should	be set
+				  when there are multiple GPIO controllers on a SoC (ast2600).
+
+The gpio and interrupt properties are further described in their respective
+bindings documentation:
+
+- Documentation/devicetree/bindings/gpio/gpio.txt
+- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+  Example:
+	gpio@1e780000 {
+		#gpio-cells = <2>;
+		compatible = "aspeed,ast2400-gpio";
+		gpio-controller;
+		interrupts = <20>;
+		reg = <0x1e780000 0x1000>;
+		interrupt-controller;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
new file mode 100644
index 0000000000..cf71f3ec96
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
@@ -0,0 +1,37 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
+
+Required properties:
+- compatible: has to be "qca,<soctype>-gpio" and one of the following
+  fallbacks:
+  - "qca,ar7100-gpio"
+  - "qca,ar9340-gpio"
+- reg: Base address and size of the controllers memory area
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters.
+- ngpios: Should be set to the number of GPIOs available on the SoC.
+
+Optional properties:
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+		     source, should be 2
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+	gpio@18040000 {
+		compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
+		reg = <0x18040000 0x30>;
+		interrupts = <2>;
+
+		ngpios = <22>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
new file mode 100644
index 0000000000..0a304ad29d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
@@ -0,0 +1,28 @@
+Cirrus Logic CLPS711X GPIO controller
+
+Required properties:
+- compatible: Should be "cirrus,ep7209-gpio"
+- reg: Physical base GPIO controller registers location and length.
+  There should be two registers, first is DATA register, the second
+  is DIRECTION.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = active high
+    1 = active low
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	gpio0 = &porta;
+};
+
+porta: gpio@80000000 {
+	compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio";
+	reg = <0x80000000 0x1>, <0x80000040 0x1>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
new file mode 100644
index 0000000000..40d0be31e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common GPIO lines
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
+  using inverted signal (e.g. RESETN).
+
+select: true
+
+properties:
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the enable control pin.
+
+  reset-gpios:
+    description:
+      GPIO (or GPIOs for power sequence) connected to the device reset pin
+      (e.g. RESET or RESETN).
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the power down pin (hardware power down or power cut,
+      e.g. PD or PWDN).
+
+  pwdn-gpios:
+    maxItems: 1
+    description: Use powerdown-gpios
+    deprecated: true
+
+  wakeup-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the pin waking up the device from suspend or other
+      power-saving modes.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mmc-pwrseq-simple
+    then:
+      properties:
+        reset-gpios:
+          minItems: 1
+          maxItems: 32
+    else:
+      properties:
+        reset-gpios:
+          maxItems: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
new file mode 100644
index 0000000000..10e56cf306
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controller for Davinci and keystone devices
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,k2g-gpio
+              - ti,am654-gpio
+              - ti,j721e-gpio
+              - ti,am64-gpio
+          - const: ti,keystone-gpio
+
+      - items:
+          - enum:
+              - ti,dm6441-gpio
+              - ti,keystone-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line.
+    minItems: 1
+    maxItems: 144
+
+  "#gpio-cells":
+    const: 2
+    description:
+      first cell is the pin number and second cell is used to specify optional parameters (unused).
+
+  interrupts:
+    description:
+      The interrupts are specified as per the interrupt parent. Only banked
+      or unbanked IRQs are supported at a time. If the interrupts are
+      banked then provide list of interrupts corresponding to each bank, else
+      provide the list of interrupts for each gpio.
+    minItems: 1
+    maxItems: 100
+
+  ti,ngpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIO pins supported consecutively.
+    minimum: 1
+
+  ti,davinci-gpio-unbanked:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIOs that have an individual interrupt line to processor.
+    minimum: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: gpio
+
+  interrupt-controller: true
+
+  power-domains:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - ti,ngpio
+  - ti,davinci-gpio-unbanked
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio0: gpio@2603000 {
+      compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+      reg = <0x02603000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <144>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k2g_clks 0x001b 0x0>;
+      clock-names = "gpio";
+    };
+
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@260bf00 {
+      compatible = "ti,keystone-gpio";
+      reg = <0x0260bf00 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      /* HW Interrupts mapped to GPIO pins */
+      interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkgpio>;
+      clock-names = "gpio";
+      ti,ngpio = <32>;
+      ti,davinci-gpio-unbanked = <32>;
+    };
+
+  - |
+    wkup_gpio0: gpio0@42110000 {
+      compatible = "ti,am654-gpio", "ti,keystone-gpio";
+      reg = <0x42110000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-parent = <&intr_wkup_gpio>;
+      interrupts = <60>, <61>, <62>, <63>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <56>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k3_clks 59 0>;
+      clock-names = "gpio";
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
new file mode 100644
index 0000000000..1cebc4058e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO delay controller
+
+maintainers:
+  - Alexander Stein <linux@ew.tq-group.com>
+
+description: |
+  This binding describes an electrical setup where setting an GPIO output
+  is delayed by some external setup, e.g. RC circuit.
+
+  +----------+                    +-----------+
+  |          |             VCC_B  |           |
+  |          |              |     |           |
+  |          | VCC_A        _     |           |
+  |  GPIO    |             | | R  |  Consumer |
+  |controller|        ___  |_|    |           |
+  |          |       |   |  |     |           |
+  |      [IOx|-------|   |--+-----|-----+     |
+  |          |       |___|  |     |   input   |
+  |          |              |     |           |
+  +----------+             --- C  +-----------+
+                           ---
+                            |
+                            -
+                           GND
+
+  If the input on the consumer is controlled by an open-drain signal
+  attached to an RC circuit the ramp-up delay is not under control
+  of the GPIO controller.
+
+properties:
+  compatible:
+    const: gpio-delay
+
+  "#gpio-cells":
+    description: |
+      Specifies the pin, ramp-up and ramp-down delays. The
+      delays are specified in microseconds.
+    const: 3
+
+  gpios:
+    description: Array of GPIOs which output signal change is delayed
+    minItems: 1
+    maxItems: 32
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    enable_delay: enable-delay {
+        compatible = "gpio-delay";
+        #gpio-cells = <3>;
+        gpio-controller;
+        gpios = <&gpio0 3 GPIO_ACTIVE_LOW>,
+                <&gpio3 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    consumer {
+        enable-gpios = <&enable_delay 0 130000 30000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
new file mode 100644
index 0000000000..0423699d74
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
@@ -0,0 +1,39 @@
+Keystone 2 DSP GPIO controller bindings
+
+HOST OS userland running on ARM can send interrupts to DSP cores using
+the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
+This is one of the component used by the IPC mechanism used on Keystone SOCs.
+
+For example TCI6638K2K SoC has 8 DSP GPIO controllers:
+ - 8 for C66x CorePacx CPUs 0-7
+
+Keystone 2 DSP GPIO controller has specific features:
+- each GPIO can be configured only as output pin;
+- setting GPIO value to 1 causes IRQ generation on target DSP core;
+- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
+  pending.
+
+Required Properties:
+- compatible: should be "ti,keystone-dsp-gpio"
+- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
+  access device state control registers and the offset of device's specific
+  registers within device state control registers range.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2.
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example:
+	dspgpio0: keystone_dsp_gpio@2620240 {
+		compatible = "ti,keystone-dsp-gpio";
+		ti,syscon-dev = <&devctrl 0x240>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	dsp0: dsp0 {
+		compatible = "linux,rproc-user";
+		...
+		kick-gpio = <&dspgpio0 27>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
new file mode 100644
index 0000000000..daadfb4926
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-gpio
+      - items:
+          - enum:
+              - cirrus,ep9302-gpio
+              - cirrus,ep9307-gpio
+              - cirrus,ep9312-gpio
+              - cirrus,ep9315-gpio
+          - const: cirrus,ep9301-gpio
+
+  reg:
+    minItems: 2
+    items:
+      - description: data register
+      - description: direction register
+      - description: interrupt registers base
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: data
+      - const: dir
+      - const: intr
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - description: port F has dedicated irq line for each gpio line
+        maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@80840000 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840000 0x04>,
+            <0x80840010 0x04>,
+            <0x80840090 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+        interrupt-controller;
+        interrupt-parent = <&vic1>;
+        interrupts = <27>;
+    };
+
+    gpio@80840004 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840004 0x04>,
+            <0x80840014 0x04>,
+            <0x808400ac 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&vic1>;
+      interrupts = <27>;
+    };
+
+    gpio@80840008 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840008 0x04>,
+            <0x80840018 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@8084000c {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x8084000c 0x04>,
+            <0x8084001c 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840020 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840020 0x04>,
+            <0x80840024 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840030 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840030 0x04>,
+            <0x80840034 0x04>,
+            <0x8084004c 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      interrupts-extended = <&vic0 19>, <&vic0 20>,
+                            <&vic0 21>, <&vic0 22>,
+                            <&vic1 15>, <&vic1 16>,
+                            <&vic1 17>, <&vic1 18>;
+    };
+
+    gpio@80840038 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840038 0x04>,
+            <0x8084003c 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840040 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840040 0x04>,
+            <0x80840044 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
new file mode 100644
index 0000000000..4540d61824
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
@@ -0,0 +1,5 @@
+Exportable MPIO interface of Exar UART chips
+
+Required properties of the device:
+ - exar,first-pin: first exportable pins (0..15)
+ - ngpios: number of exportable pins (1..16)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt
new file mode 100644
index 0000000000..e466598105
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt
@@ -0,0 +1,26 @@
+Aeroflex Gaisler GRGPIO General Purpose I/O cores.
+
+The GRGPIO GPIO core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the GRGPIO core, a Leon SPARC system,
+these properties are built from information in the AMBA plug&play.
+
+Required properties:
+
+- name : Should be "GAISLER_GPIO" or "01_01a"
+
+- reg : Address and length of the register set for the device
+
+- interrupts : Interrupt numbers for this device
+
+Optional properties:
+
+- nbits : The number of gpio lines. If not present driver assumes 32 lines.
+
+- irqmap : An array with an index for each gpio line. An index is either a valid
+	index into the interrupts property array, or 0xffffffff that indicates
+	no irq for that line. Driver provides no interrupt support if not
+	present.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/gpio/gpio-latch.yaml b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
new file mode 100644
index 0000000000..1ed82a2ceb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO latch controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  This binding describes a GPIO multiplexer based on latches connected to
+  other GPIOs, like this:
+
+  CLK0 ----------------------.        ,--------.
+  CLK1 -------------------.  `--------|>    #0 |
+                          |           |        |
+  OUT0 ----------------+--|-----------|D0    Q0|-----|<
+  OUT1 --------------+-|--|-----------|D1    Q1|-----|<
+  OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
+  OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
+  OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
+  OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
+  OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
+  OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
+         | | | | | | | |  |           `--------'
+         | | | | | | | |  |
+         | | | | | | | |  |           ,--------.
+         | | | | | | | |  `-----------|>    #1 |
+         | | | | | | | |              |        |
+         | | | | | | | `--------------|D0    Q0|-----|<
+         | | | | | | `----------------|D1    Q1|-----|<
+         | | | | | `------------------|D2    Q2|-----|<
+         | | | | `--------------------|D3    Q3|-----|<
+         | | | `----------------------|D4    Q4|-----|<
+         | | `------------------------|D5    Q5|-----|<
+         | `--------------------------|D6    Q6|-----|<
+         `----------------------------|D7    Q7|-----|<
+                                      `--------'
+
+  The number of clk-gpios and latched-gpios is not fixed. The actual number
+  of number of latches and the number of inputs per latch is derived from
+  the number of GPIOs given in the corresponding device tree properties.
+
+properties:
+  compatible:
+    const: gpio-latch
+  "#gpio-cells":
+    const: 2
+
+  clk-gpios:
+    description: Array of GPIOs to be used to clock a latch
+
+  latched-gpios:
+    description: Array of GPIOs to be used as inputs per latch
+
+  setup-duration-ns:
+    description: Delay in nanoseconds to wait after the latch inputs have been
+      set up
+
+  clock-duration-ns:
+    description: Delay in nanoseconds to wait between clock output changes
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - clk-gpios
+  - latched-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-latch {
+        #gpio-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_di_do_leds>;
+        compatible = "gpio-latch";
+        gpio-controller;
+        setup-duration-ns = <100>;
+        clock-duration-ns = <100>;
+
+        clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
+        latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
+                       <&gpio3 23 0>, <&gpio3 24 0>,
+                       <&gpio3 25 0>, <&gpio3 26 0>,
+                       <&gpio3 27 0>, <&gpio3 28 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
new file mode 100644
index 0000000000..80fcb7d70e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
@@ -0,0 +1,37 @@
+TI/National Semiconductor LP3943 GPIO controller
+
+Required properties:
+  - compatible: "ti,lp3943-gpio"
+  - gpio-controller: Marks the device node as a GPIO controller.
+  - #gpio-cells: Should be 2. See gpio.txt in this directory for a
+                 description of the cells format.
+
+Example:
+Simple LED controls with LP3943 GPIO controller
+
+&i2c4 {
+	lp3943@60 {
+		compatible = "ti,lp3943";
+		reg = <0x60>;
+
+		gpioex: gpio {
+			compatible = "ti,lp3943-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+leds {
+	compatible = "gpio-leds";
+	indicator1 {
+		label = "indi1";
+		gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
+	};
+
+	indicator2 {
+		label = "indi2";
+		gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
+		default-state = "off";
+	};
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt
new file mode 100644
index 0000000000..b3a6444b8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt
@@ -0,0 +1,59 @@
+GPIO driver for Maxim MAX3191x industrial serializer
+
+Required properties:
+ - compatible:		Must be one of:
+			"maxim,max31910"
+			"maxim,max31911"
+			"maxim,max31912"
+			"maxim,max31913"
+			"maxim,max31953"
+			"maxim,max31963"
+ - reg: 		Chip select number.
+ - gpio-controller:	Marks the device node as a GPIO controller.
+ - #gpio-cells: 	Should be two. For consumer use see gpio.txt.
+
+Optional properties:
+ - #daisy-chained-devices:
+			Number of chips in the daisy-chain (default is 1).
+ - maxim,modesel-gpios: GPIO pins to configure modesel of each chip.
+			The number of GPIOs must equal "#daisy-chained-devices"
+			(if each chip is driven by a separate pin) or 1
+			(if all chips are wired to the same pin).
+ - maxim,fault-gpios: 	GPIO pins to read fault of each chip.
+			The number of GPIOs must equal "#daisy-chained-devices"
+			or 1.
+ - maxim,db0-gpios:	GPIO pins to configure debounce of each chip.
+			The number of GPIOs must equal "#daisy-chained-devices"
+			or 1.
+ - maxim,db1-gpios:	GPIO pins to configure debounce of each chip.
+			The number of GPIOs must equal "maxim,db0-gpios".
+ - maxim,modesel-8bit:	Boolean whether the modesel pin of the chips is
+			pulled high (8-bit mode).  Use this if the modesel pin
+			is hardwired and consequently "maxim,modesel-gpios"
+			cannot be specified.  By default if neither this nor
+			"maxim,modesel-gpios" is given, the driver assumes
+			that modesel is pulled low (16-bit mode).
+ - maxim,ignore-undervoltage:
+			Boolean whether to ignore undervoltage alarms signaled
+			by the "maxim,fault-gpios" or by the status byte
+			(in 16-bit mode).  Use this if the chips are powered
+			through 5VOUT instead of VCC24V, in which case they
+			will constantly signal undervoltage.
+
+For other required and optional properties of SPI slave nodes please refer to
+../spi/spi-bus.txt.
+
+Example:
+	gpio@0 {
+		compatible = "maxim,max31913";
+		reg = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		maxim,modesel-gpios = <&gpio2 23>;
+		maxim,fault-gpios   = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		maxim,db0-gpios     = <&gpio2 25>;
+		maxim,db1-gpios     = <&gpio2 26>;
+
+		spi-max-frequency = <25000000>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
new file mode 100644
index 0000000000..410e716fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
@@ -0,0 +1,25 @@
+GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has 8 GPIO pins which can be configured as GPIO as well as the
+special IO functions.
+
+Required properties:
+-------------------
+- gpio-controller : 	Marks the device node as a gpio controller.
+- #gpio-cells : 	Should be two.  The first cell is the pin number and
+			the second cell is used to specify the gpio polarity:
+				0 = active high
+				1 = active low
+For more details, please refer generic GPIO DT binding document
+<devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+	compatible = "maxim,max77620";
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt
new file mode 100644
index 0000000000..f93d51478d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt
@@ -0,0 +1,38 @@
+Lantiq SoC External Bus memory mapped GPIO controller
+
+By attaching hardware latches to the EBU it is possible to create output
+only gpios. This driver configures a special memory address, which when
+written to outputs 16 bit to the latches.
+
+The node describing the memory mapped GPIOs needs to be a child of the node
+describing the "lantiq,localbus".
+
+Required properties:
+- compatible : Should be "lantiq,gpio-mm-lantiq"
+- reg : Address and length of the register set for the device
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters (currently
+  unused).
+- gpio-controller : Marks the device node as a gpio controller.
+
+Optional properties:
+- lantiq,shadow : The default value that we shall assume as already set on the
+  shift register cascade.
+
+Example:
+
+localbus@0 {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+		1 0 0x4000000 0x4000010>; /* addsel1 */
+	compatible = "lantiq,localbus", "simple-bus";
+
+	gpio_mm0: gpio@4000000 {
+		compatible = "lantiq,gpio-mm";
+		reg = <1 0x0 0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		lantiq,shadow = <0x77f>
+	};
+}
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
new file mode 100644
index 0000000000..b394e05825
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MMIO GPIO
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+description:
+  Some simple GPIO controllers may consist of a single data register or a pair
+  of set/clear-bit registers. Such controllers are common for glue logic in
+  FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped
+  NAND-style parallel busses.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-gpio
+      - ni,169445-nand-gpio
+      - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
+
+  big-endian: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  little-endian: true
+
+  reg:
+    minItems: 1
+    description:
+      A list of registers in the controller. The width of each register is
+      determined by its size. All registers must have the same width. The number
+      of GPIOs is set by the width, with bit 0 corresponding to GPIO 0.
+    items:
+      - description:
+          Register to READ the value of the GPIO lines. If GPIO line is high,
+          the bit will be set. If the GPIO line is low, the bit will be cleared.
+          This register may also be used to drive GPIOs if the SET register is
+          omitted.
+      - description:
+          Register to SET the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line high.
+      - description:
+          Register to CLEAR the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line low. If this register is omitted,
+          the SET register will be used to clear the GPIO lines as well, by
+          actively writing the line with 0.
+      - description:
+          Register to set the line as OUTPUT. Setting a bit in this register
+          will turn that line into an output line. Conversely, clearing a bit
+          will turn that line into an input.
+      - description:
+          Register to set this line as INPUT. Setting a bit in this register
+          will turn that line into an input line. Conversely, clearing a bit
+          will turn that line into an output.
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+    items:
+      enum:
+        - dat
+        - set
+        - clr
+        - dirout
+        - dirin
+
+  native-endian: true
+
+  no-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If this property is present, the controller cannot drive the GPIO lines.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1f300010 {
+      compatible = "ni,169445-nand-gpio";
+      reg = <0x1f300010 0x4>;
+      reg-names = "dat";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@e0100000 {
+      compatible = "wd,mbl-gpio";
+      reg-names = "dat";
+      reg = <0xe0100000 0x1>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      no-output;
+    };
+
+    gpio@fffe0406 {
+      compatible = "brcm,bcm6345-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0xfffe0406 2>, <0xfffe040a 2>;
+      native-endian;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
new file mode 100644
index 0000000000..410759de9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
@@ -0,0 +1,18 @@
+Turris Mox Moxtet GPIO expander via Moxtet bus
+
+Required properties:
+ - compatible		: Should be "cznic,moxtet-gpio".
+ - gpio-controller	: Marks the device node as a GPIO controller.
+ - #gpio-cells		: Should be two. For consumer use see gpio.txt.
+
+Other properties are required for a Moxtet bus device, please refer to
+Documentation/devicetree/bindings/bus/moxtet.txt.
+
+Example:
+
+	moxtet_sfp: gpio@0 {
+		compatible = "cznic,moxtet-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0>;
+	}
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
new file mode 100644
index 0000000000..cd28e932bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -0,0 +1,53 @@
+* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
+
+Required properties:
+- compatible : Should be "fsl,<soc>-gpio"
+  The following <soc>s are known to be supported:
+	mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
+	ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+
+Optional properties:
+- little-endian : GPIO registers are used as little endian. If not
+                  present registers are used as big endian by default.
+
+Example of gpio-controller node for a mpc5125 SoC:
+
+gpio0: gpio@1100 {
+	compatible = "fsl,mpc5125-gpio";
+	#gpio-cells = <2>;
+	reg = <0x1100 0x080>;
+	interrupts = <78 0x8>;
+};
+
+Example of gpio-controller node for a ls2080a SoC:
+
+gpio0: gpio@2300000 {
+	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+	reg = <0x0 0x2300000 0x0 0x10000>;
+	interrupts = <0 36 0x4>; /* Level high type */
+	gpio-controller;
+	little-endian;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+
+Example of gpio-controller node for a ls1028a/ls1088a SoC:
+
+gpio1: gpio@2300000 {
+	compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+	reg = <0x0 0x2300000 0x0 0x10000>;
+	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	little-endian;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
new file mode 100644
index 0000000000..f1bd1e6b2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU GPIO controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-8k-gpio
+          - marvell,orion-gpio
+
+      - items:
+          - enum:
+              - marvell,mv78200-gpio
+              - marvell,armada-370-gpio
+          - const: marvell,orion-gpio
+
+      - description: Deprecated binding
+        items:
+          - const: marvell,armadaxp-gpio
+          - const: marvell,orion-gpio
+        deprecated: true
+
+  reg:
+    description: |
+      Address and length of the register set for the device. Not used for
+      marvell,armada-8k-gpio.
+
+      A second entry can be provided, for the PWM function using the GPIO Blink
+      Counter on/off registers.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pwm
+    minItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the gpio registers (in bytes)
+
+  interrupts:
+    description: |
+      The list of interrupts that are used for all the pins managed by this
+      GPIO bank. There can be more than one interrupt (example: 1 interrupt
+      per 8 pins on Armada XP, which means 4 interrupts per bank of 32
+      GPIOs).
+    minItems: 1
+    maxItems: 4
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  "#gpio-cells":
+    const: 2
+
+  marvell,pwm-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the pwm registers (in bytes)
+
+  "#pwm-cells":
+    description:
+      The first cell is the GPIO line number. The second cell is the period
+      in nanoseconds.
+    const: 2
+
+  clocks:
+    description:
+      Clock(s) used for PWM function.
+    items:
+      - description: Core clock
+      - description: AXI bus clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: core
+      - const: axi
+    minItems: 1
+
+required:
+  - compatible
+  - gpio-controller
+  - ngpios
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-gpio
+    then:
+      required:
+        - offset
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: true
+
+examples:
+  - |
+    gpio@d0018100 {
+      compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
+      reg = <0xd0018100 0x40>, <0xd0018800 0x30>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <16>, <17>, <18>, <19>;
+    };
+
+  - |
+    gpio@18140 {
+      compatible = "marvell,armada-370-gpio", "marvell,orion-gpio";
+      reg = <0x18140 0x40>, <0x181c8 0x08>;
+      reg-names = "gpio", "pwm";
+      ngpios = <17>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      #pwm-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <87>, <88>, <89>;
+      clocks = <&coreclk 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
new file mode 100644
index 0000000000..dfa1133f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS GPIO controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  The Freescale MXS GPIO controller is part of MXS PIN controller.
+  The GPIOs are organized in port/bank, each port consists of 32 GPIOs.
+  As the GPIO controller is embedded in the PIN controller and all the
+  GPIO ports share the same IO space with PIN controller, the GPIO node
+  will be represented as sub-nodes of MXS pinctrl node.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-pinctrl
+      - fsl,imx28-pinctrl
+
+  '#address-cells':
+    const: 1
+  '#size-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "gpio@[0-9]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - fsl,imx23-gpio
+          - fsl,imx28-gpio
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        description: Should be the port interrupt shared by all 32 pins.
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-controller: true
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - interrupt-controller
+      - "#interrupt-cells"
+      - "#gpio-cells"
+      - gpio-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@80018000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-pinctrl";
+        reg = <0x80018000 0x2000>;
+
+        gpio@0 {
+                compatible = "fsl,imx28-gpio";
+                reg = <0>;
+                interrupts = <127>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@1 {
+                compatible = "fsl,imx28-gpio";
+                reg = <1>;
+                interrupts = <126>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@2 {
+                compatible = "fsl,imx28-gpio";
+                reg = <2>;
+                interrupts = <125>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@3 {
+                compatible = "fsl,imx28-gpio";
+                reg = <3>;
+                interrupts = <124>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+
+        gpio@4 {
+                compatible = "fsl,imx28-gpio";
+                reg = <4>;
+                interrupts = <123>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
new file mode 100644
index 0000000000..8315ac7780
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
@@ -0,0 +1,31 @@
+Nomadik GPIO controller
+
+Required properties:
+- compatible            : Should be "st,nomadik-gpio".
+- reg                   : Physical base address and length of the controller's registers.
+- interrupts            : The interrupt outputs from the controller.
+- #gpio-cells           : Should be two:
+                            The first cell is the pin number.
+                            The second cell is used to specify optional parameters:
+                              - bits[3:0] trigger type and level flags:
+                                  1 = low-to-high edge triggered.
+                                  2 = high-to-low edge triggered.
+                                  4 = active high level-sensitive.
+                                  8 = active low level-sensitive.
+- gpio-controller       : Marks the device node as a GPIO controller.
+- interrupt-controller  : Marks the device node as an interrupt controller.
+- gpio-bank             : Specifies which bank a controller owns.
+- st,supports-sleepmode : Specifies whether controller can sleep or not
+
+Example:
+
+                gpio1: gpio@8012e080 {
+                        compatible = "st,nomadik-gpio";
+                        reg =  <0x8012e080 0x80>;
+                        interrupts = <0 120 0x4>;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        interrupt-controller;
+                        st,supports-sleepmode;
+                        gpio-bank = <1>;
+                };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
new file mode 100644
index 0000000000..08b5b52a3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
@@ -0,0 +1,27 @@
+Palmas GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,palams-gpio" for palma series of the GPIO controller
+  - "ti,tps80036-gpio" for Palma series device TPS80036.
+  - "ti,tps65913-gpio" for palma series device TPS65913.
+  - "ti,tps65914-gpio" for palma series device TPS65914.
+- #gpio-cells : Should be two.
+  - first cell is the gpio pin number
+  - second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- gpio-controller : Marks the device node as a GPIO controller.
+
+Note: This gpio node will be sub node of palmas node.
+
+Example:
+	palmas: tps65913@58 {
+		:::::::::::
+		palmas_gpio: palmas_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		:::::::::::
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
new file mode 100644
index 0000000000..452f8972a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCA9570 I2C GPO expander
+
+maintainers:
+  - Sungbo Eo <mans0n@gorani.run>
+
+properties:
+  compatible:
+    enum:
+      - dlg,slg7xl45106
+      - nxp,pca9570
+      - nxp,pca9571
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-line-names:
+    minItems: 4
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@24 {
+            compatible = "nxp,pca9570";
+            reg = <0x24>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
new file mode 100644
index 0000000000..99febb8ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA95xx I2C GPIO multiplexer
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Bindings for the family of I2C GPIO multiplexers/expanders: NXP PCA95xx,
+  Maxim MAX73xx
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: diodes,pi4ioe5v6534q
+          - const: nxp,pcal6534
+      - items:
+          - enum:
+              - exar,xra1202
+              - maxim,max7310
+              - maxim,max7312
+              - maxim,max7313
+              - maxim,max7315
+              - maxim,max7319
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+              - nxp,pca6408
+              - nxp,pca6416
+              - nxp,pca9505
+              - nxp,pca9506
+              - nxp,pca9534
+              - nxp,pca9535
+              - nxp,pca9536
+              - nxp,pca9537
+              - nxp,pca9538
+              - nxp,pca9539
+              - nxp,pca9554
+              - nxp,pca9555
+              - nxp,pca9556
+              - nxp,pca9557
+              - nxp,pca9574
+              - nxp,pca9575
+              - nxp,pca9698
+              - nxp,pcal6408
+              - nxp,pcal6416
+              - nxp,pcal6524
+              - nxp,pcal6534
+              - nxp,pcal9535
+              - nxp,pcal9554b
+              - nxp,pcal9555a
+              - onnn,cat9554
+              - onnn,pca9654
+              - ti,pca6107
+              - ti,pca9536
+              - ti,tca6408
+              - ti,tca6416
+              - ti,tca6424
+              - ti,tca9538
+              - ti,tca9539
+              - ti,tca9554
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 40
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specification for the RESET input. This is an active low signal to
+      the PCA953x.  Not valid for Maxim MAX732x devices.
+
+  vcc-supply:
+    description:
+      Optional power supply.  Not valid for Maxim MAX732x devices.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+    then:
+      properties:
+        reset-gpios: false
+        vcc-supply: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@20 {
+            compatible = "nxp,pca9505";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_pca9505>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+            usb3-sata-sel-hog {
+                gpio-hog;
+                gpios = <4 GPIO_ACTIVE_HIGH>;
+                output-low;
+                line-name = "usb3_sata_sel";
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio99: gpio@22 {
+            compatible = "nxp,pcal6524";
+            reg = <0x22>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            vcc-supply = <&vdds_1v8_main>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
+                              "vibra", "fault2", "p06", "p07", "en-usb",
+                              "en-host1", "en-host2", "chg-int", "p14", "p15",
+                              "mic-int", "en-modem", "shdn-hs-amp",
+                              "chg-status+red", "green", "blue", "en-esata",
+                              "fault1", "p26", "p27";
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support enabled */
+        gpio@6d {
+            compatible = "maxim,max7325";
+            reg = <0x6d>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support disabled */
+        gpio@6e {
+            compatible = "maxim,max7325";
+            reg = <0x6e>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
new file mode 100644
index 0000000000..fba3c61f6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
@@ -0,0 +1,34 @@
+Generic Parallel-in/Serial-out Shift Register GPIO Driver
+
+This binding describes generic parallel-in/serial-out shift register
+devices that can be used for GPI (General Purpose Input). This includes
+SN74165 serial-out shift registers and the SN65HVS88x series of
+industrial serializers.
+
+Required properties:
+ - compatible		: Should be "pisosr-gpio".
+ - gpio-controller	: Marks the device node as a GPIO controller.
+ - #gpio-cells		: Should be two. For consumer use see gpio.txt.
+
+Optional properties:
+ - ngpios		: Number of used GPIO lines (0..n-1), default is 8.
+ - load-gpios		: GPIO pin specifier attached to load enable, this
+			  pin is pulsed before reading from the device to
+			  load input pin values into the device.
+
+For other required and optional properties of SPI slave
+nodes please refer to ../spi/spi-bus.txt.
+
+Example:
+
+	gpio@0 {
+		compatible = "ti,sn65hvs882", "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-rda.yaml b/Documentation/devicetree/bindings/gpio/gpio-rda.yaml
new file mode 100644
index 0000000000..6ece555f07
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-rda.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-rda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro GPIO controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    const: rda,8810pl-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    description:
+      Number of available gpios in a bank.
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
new file mode 100644
index 0000000000..d565c4b63d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC Serial To Parallel (STP) GPIO controller
+
+description: |
+  The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+  peripheral controller used to drive external shift register cascades. At most
+  3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+  and Ethernet PHYs to drive some bytes of the cascade automatically.
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,gpio-stp-xway
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description:
+      The first cell is the pin number and the second cell is used to specify
+      consumer flags.
+    const: 2
+
+  lantiq,shadow:
+    description:
+      The default value that we shall assume as already set on the
+      shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x000000
+    maximum: 0xffffff
+
+  lantiq,groups:
+    description:
+      Set the 3 bit mask to select which of the 3 groups are enabled
+      in the shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+  lantiq,dsl:
+    description:
+      The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
+      property can enable this feature.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x3
+
+  lantiq,rising:
+    description:
+      Use rising instead of falling edge for the shift register.
+    type: boolean
+
+patternProperties:
+  "^lantiq,phy[1-4]$":
+    description:
+      The gphy core can control 3 bits of the gpio cascade. In the xRX200 family
+      phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4].
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e100bb0 {
+        compatible = "lantiq,gpio-stp-xway";
+        reg = <0xE100BB0 0x40>;
+        #gpio-cells = <2>;
+        gpio-controller;
+
+        pinctrl-0 = <&stp_pins>;
+        pinctrl-names = "default";
+
+        lantiq,shadow = <0xffffff>;
+        lantiq,groups = <0x7>;
+        lantiq,dsl = <0x3>;
+        lantiq,phy1 = <0x7>;
+        lantiq,phy2 = <0x7>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-thunderx.txt b/Documentation/devicetree/bindings/gpio/gpio-thunderx.txt
new file mode 100644
index 0000000000..3f883ae29d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-thunderx.txt
@@ -0,0 +1,27 @@
+Cavium ThunderX/OCTEON-TX GPIO controller bindings
+
+Required Properties:
+- reg: The controller bus address.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Must be 2.
+  - First cell is the GPIO pin number relative to the controller.
+  - Second cell is a standard generic flag bitfield as described in gpio.txt.
+
+Optional Properties:
+- compatible: "cavium,thunder-8890-gpio", unused as PCI driver binding is used.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Must be present and have value of 2 if
+                    "interrupt-controller" is present.
+  - First cell is the GPIO pin number relative to the controller.
+  - Second cell is triggering flags as defined in interrupts.txt.
+
+Example:
+
+gpio_6_0: gpio@6,0 {
+	compatible = "cavium,thunder-8890-gpio";
+	reg = <0x3000 0 0 0 0>; /*  DEVFN = 0x30 (6:0) */
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
new file mode 100644
index 0000000000..157969bc4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPIC2810 GPIO controller
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tpic2810
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@60 {
+            compatible = "ti,tpic2810";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "LED A", "LED B", "LED C";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
new file mode 100644
index 0000000000..92ea9c8f63
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
@@ -0,0 +1,20 @@
+* TS-4800 FPGA's GPIO controller bindings
+
+Required properties:
+- compatible: Must be "technologic,ts4800-gpio".
+- #gpio-cells: Should be two. The first cell is the pin number.
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+
+Optional property:
+- ngpios: See "gpio.txt"
+
+Example:
+
+gpio1: gpio {
+	compatible = "technologic,ts4800-gpio";
+	reg = <0x10020 0x6>;
+	ngpios = <8>;
+	gpio-controller;
+	#gpio-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
new file mode 100644
index 0000000000..3f8e71b1ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
@@ -0,0 +1,30 @@
+* Technologic Systems I2C-FPGA's GPIO controller bindings
+
+This bindings describes the GPIO controller for Technologic's FPGA core.
+TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA
+uses 2 bits: it doesn't use a dedicated input bit.
+
+Required properties:
+- compatible: Should be one of the following
+		"technologic,ts4900-gpio"
+		"technologic,ts7970-gpio"
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+- #gpio-cells: Should be two. The first cell is the pin number.
+- gpio-controller: Marks the device node as a gpio controller.
+
+Optional property:
+- ngpios: Number of GPIOs this controller is instantiated with,
+  the default is 32. See gpio.txt for more details.
+
+Example:
+
+&i2c2 {
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <32>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
new file mode 100644
index 0000000000..66788fda1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
@@ -0,0 +1,29 @@
+twl4030 GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,twl4030-gpio" for twl4030 GPIO controller
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify optional parameters (unused)
+- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+- interrupt-controller: Mark the device node as an interrupt controller
+  The first cell is the GPIO number.
+  The second cell is not used.
+- ti,use-leds : Enables LEDA and LEDB outputs if set
+- ti,debounce : if n-th bit is set, debounces GPIO-n
+- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
+- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
+- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
+
+Example:
+
+twl_gpio: gpio {
+    compatible = "ti,twl4030-gpio";
+    #gpio-cells = <2>;
+    gpio-controller;
+    #interrupt-cells = <2>;
+    interrupt-controller;
+    ti,use-leds;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
new file mode 100644
index 0000000000..7c2d152e86
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-vf610.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale VF610 PORT/GPIO module
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description: |
+  The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
+  functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
+  each, and each PORT module has its own interrupt.
+
+  Note: Each GPIO port should have an alias correctly numbered in "aliases"
+  node.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,vf610-gpio
+      - items:
+          - const: fsl,imx7ulp-gpio
+          - const: fsl,vf610-gpio
+      - items:
+          - enum:
+              - fsl,imx93-gpio
+              - fsl,imx8ulp-gpio
+          - const: fsl,imx7ulp-gpio
+
+  reg:
+    description: The first reg tuple represents the PORT module, the second tuple
+      represents the GPIO module.
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  clocks:
+    items:
+      - description: SoC GPIO clock
+      - description: SoC PORT clock
+
+  clock-names:
+    items:
+      - const: gpio
+      - const: port
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@40049000 {
+        compatible = "fsl,vf610-gpio";
+        reg = <0x40049000 0x1000>, <0x400ff000 0x40>;
+        interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&iomuxc 0 0 32>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
new file mode 100644
index 0000000000..601d857545
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-virtio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio GPIO controller
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: /schemas/virtio/virtio-device.yaml#
+
+description:
+  Virtio GPIO controller, see /schemas/virtio/virtio-device.yaml for more
+  details.
+
+properties:
+  $nodename:
+    const: gpio
+
+  compatible:
+    const: virtio,device29
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        gpio {
+            compatible = "virtio,device29";
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
new file mode 100644
index 0000000000..7ddf292db1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
@@ -0,0 +1,64 @@
+APM X-Gene Standby GPIO controller bindings
+
+This is a gpio controller in the standby domain. It also supports interrupt in
+some particular pins which are sourced to its parent interrupt controller
+as diagram below:
+                            +-----------------+
+                            | X-Gene standby  |
+                            | GPIO controller +------ GPIO_0
++------------+              |                 | ...
+| Parent IRQ | EXT_INT_0    |                 +------ GPIO_8/EXT_INT_0
+| controller | (SPI40)      |                 | ...
+| (GICv2)    +--------------+                 +------ GPIO_[N+8]/EXT_INT_N
+|            |   ...        |                 |
+|            | EXT_INT_N    |                 +------ GPIO_[N+9]
+|            | (SPI[40 + N])|                 | ...
+|            +--------------+                 +------ GPIO_MAX
++------------+              +-----------------+
+
+Required properties:
+- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
+- reg: Physical base address and size of the controller's registers
+- #gpio-cells: Should be two.
+	- first cell is the pin number
+	- second cell is used to specify the gpio polarity:
+		0 = active high
+		1 = active low
+- gpio-controller: Marks the device node as a GPIO controller.
+- interrupts: The EXT_INT_0 parent interrupt resource must be listed first.
+- interrupt-cells: Should be two.
+       - first cell is 0-N corresponding for EXT_INT_0 to EXT_INT_N.
+       - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- apm,nr-gpios: Optional, specify number of gpios pin.
+- apm,nr-irqs: Optional, specify number of interrupt pins.
+- apm,irq-start: Optional, specify lowest gpio pin support interrupt.
+
+Example:
+	sbgpio: gpio@17001000{
+		compatible = "apm,xgene-gpio-sb";
+		reg = <0x0 0x17001000 0x0 0x400>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupts = 	<0x0 0x28 0x1>,
+				<0x0 0x29 0x1>,
+				<0x0 0x2a 0x1>,
+				<0x0 0x2b 0x1>,
+				<0x0 0x2c 0x1>,
+				<0x0 0x2d 0x1>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		apm,nr-gpios = <22>;
+		apm,nr-irqs = <6>;
+		apm,irq-start = <8>;
+	};
+
+	testuser {
+		compatible = "example,testuser";
+		/* Use the GPIO_13/EXT_INT_5 line as an active high triggered
+		 * level interrupt
+		 */
+		interrupts = <5 4>;
+		interrupt-parent = <&sbgpio>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
new file mode 100644
index 0000000000..86dbb05e77
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
@@ -0,0 +1,22 @@
+APM X-Gene SoC GPIO controller bindings
+
+This is a gpio controller that is part of the flash controller.
+This gpio controller controls a total of 48 gpios.
+
+Required properties:
+- compatible: "apm,xgene-gpio" for X-Gene GPIO controller
+- reg: Physical base address and size of the controller's registers
+- #gpio-cells: Should be two.
+	- first cell is the pin number
+	- second cell is used to specify the gpio polarity:
+		0 = active high
+		1 = active low
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+	gpio0: gpio0@1701c000 {
+		compatible = "apm,xgene-gpio";
+		reg = <0x0 0x1701c000 0x0 0x40>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt b/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
new file mode 100644
index 0000000000..e13cc399b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
@@ -0,0 +1,46 @@
+GPIO Driver for XRA1403 16-BIT GPIO Expander With Reset Input from EXAR
+
+The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features available:
+	- Individually programmable inputs:
+		- Internal pull-up resistors
+		- Polarity inversion
+		- Individual interrupt enable
+		- Rising edge and/or Falling edge interrupt
+		- Input filter
+	- Individually programmable outputs
+		- Output Level Control
+		- Output Three-State Control
+
+Properties
+----------
+Check documentation for SPI and GPIO controllers regarding properties needed to configure the node.
+
+	- compatible = "exar,xra1403".
+	- reg - SPI id of the device.
+	- gpio-controller - marks the node as gpio.
+	- #gpio-cells - should be two where the first cell is the pin number
+		and the second one is used for optional parameters.
+
+Optional properties:
+-------------------
+	- reset-gpios: in case available used to control the device reset line.
+	- interrupt-controller - marks the node as interrupt controller.
+	- #interrupt-cells - should be two and represents the number of cells
+		needed to encode interrupt source.
+
+Example
+--------
+
+	gpioxra0: gpio@2 {
+		compatible = "exar,xra1403";
+		reg = <2>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <1000000>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt
new file mode 100644
index 0000000000..a37bd9ae27
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt
@@ -0,0 +1,16 @@
+Zevio GPIO controller
+
+Required properties:
+- compatible: Should be "lsi,zevio-gpio"
+- reg: Address and length of the register set for the device
+- #gpio-cells: Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+	gpio: gpio@90000000 {
+		compatible = "lsi,zevio-gpio";
+		reg = <0x90000000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
new file mode 100644
index 0000000000..5e2496379a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq GPIO controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 58
+    maxItems: 174
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynqmp-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 174
+          maxItems: 174
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynq-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 118
+          maxItems: 118
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,versal-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 58
+          maxItems: 58
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,pmc-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 116
+          maxItems: 116
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - interrupts
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e000a000 {
+      #gpio-cells = <2>;
+      compatible = "xlnx,zynq-gpio-1.0";
+      clocks = <&clkc 42>;
+      gpio-controller;
+      interrupt-parent = <&intc>;
+      interrupts = <0 20 4>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      reg = <0xe000a000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
new file mode 100644
index 0000000000..d82c32217f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -0,0 +1,348 @@
+Specifying GPIO information for devices
+=======================================
+
+1) gpios property
+-----------------
+
+GPIO properties should be named "[<name>-]gpios", with <name> being the purpose
+of this GPIO for the device. While a non-existent <name> is considered valid
+for compatibility reasons (resolving to the "gpios" property), it is not allowed
+for new bindings. Also, GPIO properties named "[<name>-]gpio" are valid and old
+bindings use it, but are only supported for compatibility reasons and should not
+be used for newer bindings since it has been deprecated.
+
+GPIO properties can contain one or more GPIO phandles, but only in exceptional
+cases should they contain more than one. If your device uses several GPIOs with
+distinct functions, reference each of them under its own property, giving it a
+meaningful name. The only case where an array of GPIOs is accepted is when
+several GPIOs serve the same function (e.g. a parallel data line).
+
+The exact purpose of each gpios property must be documented in the device tree
+binding of the device.
+
+The following example could be used to describe GPIO pins used as device enable
+and bit-banged data signals:
+
+	gpio1: gpio1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	[...]
+
+	data-gpios = <&gpio1 12 0>,
+		     <&gpio1 13 0>,
+		     <&gpio1 14 0>,
+		     <&gpio1 15 0>;
+
+In the above example, &gpio1 uses 2 cells to specify a gpio. The first cell is
+a local offset to the GPIO line and the second cell represent consumer flags,
+such as if the consumer desire the line to be active low (inverted) or open
+drain. This is the recommended practice.
+
+The exact meaning of each specifier cell is controller specific, and must be
+documented in the device tree binding for the device, but it is strongly
+recommended to use the two-cell approach.
+
+Most controllers are specifying a generic flag bitfield in the last cell, so
+for these, use the macros defined in
+include/dt-bindings/gpio/gpio.h whenever possible:
+
+Example of a node using GPIOs:
+
+	node {
+		enable-gpios = <&qe_pio_e 18 GPIO_ACTIVE_HIGH>;
+	};
+
+GPIO_ACTIVE_HIGH is 0, so in this example gpio-specifier is "18 0" and encodes
+GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+Optional standard bitfield specifiers for the last cell:
+
+- Bit 0: 0 means active high, 1 means active low
+- Bit 1: 0 mean push-pull wiring, see:
+           https://en.wikipedia.org/wiki/Push-pull_output
+         1 means single-ended wiring, see:
+           https://en.wikipedia.org/wiki/Single-ended_triode
+- Bit 2: 0 means open-source, 1 means open drain, see:
+           https://en.wikipedia.org/wiki/Open_collector
+- Bit 3: 0 means the output should be maintained during sleep/low-power mode
+         1 means the output state can be lost during sleep/low-power mode
+- Bit 4: 0 means no pull-up resistor should be enabled
+         1 means a pull-up resistor should be enabled
+         This setting only applies to hardware with a simple on/off
+         control for pull-up configuration. If the hardware has more
+         elaborate pull-up configuration, it should be represented
+         using a pin control binding.
+- Bit 5: 0 means no pull-down resistor should be enabled
+         1 means a pull-down resistor should be enabled
+         This setting only applies to hardware with a simple on/off
+         control for pull-down configuration. If the hardware has more
+         elaborate pull-down configuration, it should be represented
+         using a pin control binding.
+
+1.1) GPIO specifier best practices
+----------------------------------
+
+A gpio-specifier should contain a flag indicating the GPIO polarity; active-
+high or active-low. If it does, the following best practices should be
+followed:
+
+The gpio-specifier's polarity flag should represent the physical level at the
+GPIO controller that achieves (or represents, for inputs) a logically asserted
+value at the device. The exact definition of logically asserted should be
+defined by the binding for the device. If the board inverts the signal between
+the GPIO controller and the device, then the gpio-specifier will represent the
+opposite physical level than the signal at the device's pin.
+
+When the device's signal polarity is configurable, the binding for the
+device must either:
+
+a) Define a single static polarity for the signal, with the expectation that
+any software using that binding would statically program the device to use
+that signal polarity.
+
+The static choice of polarity may be either:
+
+a1) (Preferred) Dictated by a binding-specific DT property.
+
+or:
+
+a2) Defined statically by the DT binding itself.
+
+In particular, the polarity cannot be derived from the gpio-specifier, since
+that would prevent the DT from separately representing the two orthogonal
+concepts of configurable signal polarity in the device, and possible board-
+level signal inversion.
+
+or:
+
+b) Pick a single option for device signal polarity, and document this choice
+in the binding. The gpio-specifier should represent the polarity of the signal
+(at the GPIO controller) assuming that the device is configured for this
+particular signal polarity choice. If software chooses to program the device
+to generate or receive a signal of the opposite polarity, software will be
+responsible for correctly interpreting (inverting) the GPIO signal at the GPIO
+controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must contain both an empty "gpio-controller"
+property, and a #gpio-cells integer property, which indicates the number of
+cells in a gpio-specifier.
+
+Some system-on-chips (SoCs) use the concept of GPIO banks. A GPIO bank is an
+instance of a hardware IP core on a silicon die, usually exposed to the
+programmer as a coherent range of I/O addresses. Usually each such bank is
+exposed in the device tree as an individual gpio-controller node, reflecting
+the fact that the hardware was synthesized by reusing the same IP block a
+few times over.
+
+Optionally, a GPIO controller may have a "ngpios" property. This property
+indicates the number of in-use slots of available slots for GPIOs. The
+typical example is something like this: the hardware register is 32 bits
+wide, but only 18 of the bits have a physical counterpart. The driver is
+generally written so that all 32 bits can be used, but the IP block is reused
+in a lot of designs, some using all 32 bits, some using 18 and some using
+12. In this case, setting "ngpios = <18>;" informs the driver that only the
+first 18 GPIOs, at local offset 0 .. 17, are in use.
+
+If these GPIOs do not happen to be the first N GPIOs at offset 0...N-1, an
+additional set of tuples is needed to specify which GPIOs are unusable, with
+the gpio-reserved-ranges binding. This property indicates the start and size
+of the GPIOs that can't be used.
+
+Optionally, a GPIO controller may have a "gpio-line-names" property. This is
+an array of strings defining the names of the GPIO lines going out of the
+GPIO controller.
+
+For lines which are routed to on-board devices, this name should be
+the most meaningful producer name for the system, such as a rail name
+indicating the usage. Package names, such as a pin name, are discouraged:
+such lines have opaque names (since they are by definition general-purpose)
+and such names are usually not very helpful. For example "MMC-CD", "Red LED
+Vdd" and "ethernet reset" are reasonable line names as they describe what
+the line is used for. "GPIO0" is not a good name to give to a GPIO line
+that is hard-wired to a specific device.
+
+However, in the case of lines that are routed to a general purpose header
+(e.g. the Raspberry Pi 40-pin header), and therefore are not hard-wired to
+specific devices, using a pin number or the names on the header is fine
+provided these are real (preferably unique) names. Using an SoC's pad name
+or package name, or names made up from kernel-internal software constructs,
+are strongly discouraged. For example "pin8 [gpio14/uart0_txd]" is fine
+if the board's documentation labels pin 8 as such. However "PortB_24" (an
+example of a name from an SoC's reference manual) would not be desirable.
+
+In either case placeholders are discouraged: rather use the "" (blank
+string) if the use of the GPIO line is undefined in your design. Ideally,
+try to add comments to the dts file describing the naming the convention
+you have chosen, and specifying from where the names are derived.
+
+The names are assigned starting from line offset 0, from left to right,
+from the passed array. An incomplete array (where the number of passed
+names is less than ngpios) will be used up until the last provided valid
+line index.
+
+Example:
+
+gpio-controller@00000000 {
+	compatible = "foo";
+	reg = <0x00000000 0x1000>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	ngpios = <18>;
+	gpio-reserved-ranges = <0 4>, <12 2>;
+	gpio-line-names = "MMC-CD", "MMC-WP", "VDD eth", "RST eth", "LED R",
+		"LED G", "LED B", "Col A", "Col B", "Col C", "Col D",
+		"Row A", "Row B", "Row C", "Row D", "NMI button",
+		"poweroff", "reset";
+}
+
+The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
+providing automatic GPIO request and configuration as part of the
+gpio-controller's driver probe function.
+
+Each GPIO hog definition is represented as a child node of the GPIO controller.
+Required properties:
+- gpio-hog:   A property specifying that this child node represents a GPIO hog.
+- gpios:      Store the GPIO information (id, flags, ...) for each GPIO to
+	      affect. Shall contain an integer multiple of the number of cells
+	      specified in its parent node (GPIO controller node).
+Only one of the following properties scanned in the order shown below.
+This means that when multiple properties are present they will be searched
+in the order presented below and the first match is taken as the intended
+configuration.
+- input:      A property specifying to set the GPIO direction as input.
+- output-low  A property specifying to set the GPIO direction as output with
+	      the value low.
+- output-high A property specifying to set the GPIO direction as output with
+	      the value high.
+
+Optional properties:
+- line-name:  The GPIO label name. If not present the node name is used.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+	qe_pio_a: gpio-controller@1400 {
+		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		line_b-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			output-low;
+			line-name = "foo-bar-gpio";
+		};
+	};
+
+	qe_pio_e: gpio-controller@1460 {
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+2.1) gpio- and pin-controller interaction
+-----------------------------------------
+
+Some or all of the GPIOs provided by a GPIO controller may be routed to pins
+on the package via a pin controller. This allows muxing those pins between
+GPIO and other functions. It is a fairly common practice among silicon
+engineers.
+
+2.2) Ordinary (numerical) GPIO ranges
+-------------------------------------
+
+It is useful to represent which GPIOs correspond to which pins on which pin
+controllers. The gpio-ranges property described below represents this with
+a discrete set of ranges mapping pins from the pin controller local number space
+to pins in the GPIO controller local number space.
+
+The format is: <[pin controller phandle], [GPIO controller offset],
+                [pin controller offset], [number of pins]>;
+
+The GPIO controller offset pertains to the GPIO controller node containing the
+range definition.
+
+The pin controller node referenced by the phandle must conform to the bindings
+described in pinctrl/pinctrl-bindings.txt.
+
+Each offset runs from 0 to N. It is perfectly fine to pile any number of
+ranges with just one pin-to-GPIO line mapping if the ranges are concocted, but
+in practice these ranges are often lumped in discrete sets.
+
+Example:
+
+    gpio-ranges = <&foo 0 20 10>, <&bar 10 50 20>;
+
+This means:
+- pins 20..29 on pin controller "foo" is mapped to GPIO line 0..9 and
+- pins 50..69 on pin controller "bar" is mapped to GPIO line 10..29
+
+
+Verbose example:
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+		gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
+	};
+
+Here, a single GPIO controller has GPIOs 0..9 routed to pin controller
+pinctrl1's pins 20..29, and GPIOs 10..29 routed to pin controller pinctrl2's
+pins 50..69.
+
+
+2.3) GPIO ranges from named pin groups
+--------------------------------------
+
+It is also possible to use pin groups for gpio ranges when pin groups are the
+easiest and most convenient mapping.
+
+Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
+names.
+
+The property gpio-ranges-group-names must contain exactly one string for each
+range.
+
+Elements of gpio-ranges-group-names must contain the name of a pin group
+defined in the respective pin controller. The number of pins/GPIO lines in the
+range is the number of pins in that pin group. The number of pins of that
+group is defined int the implementation and not in the device tree.
+
+If numerical and named pin groups are mixed, the string corresponding to a
+numerical pin range in gpio-ranges-group-names must be empty.
+
+Example:
+
+	gpio_pio_i: gpio-controller@14b0 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1480 0x18>;
+		gpio-controller;
+		gpio-ranges =			<&pinctrl1 0 20 10>,
+						<&pinctrl2 10 0 0>,
+						<&pinctrl1 15 0 10>,
+						<&pinctrl2 25 0 0>;
+		gpio-ranges-group-names =	"",
+						"foo",
+						"",
+						"bar";
+	};
+
+Here, three GPIO ranges are defined referring to two pin controllers.
+
+pinctrl1 GPIO ranges are defined using pin numbers whereas the GPIO ranges
+in pinctrl2 are defined using the pin groups named "foo" and "bar".
+
+Previous versions of this binding required all pin controller nodes that
+were referenced by any gpio-ranges property to contain a property named
+#gpio-range-cells with value <3>. This requirement is now deprecated.
+However, that property may still exist in older device trees for
+compatibility reasons, and would still be required even in new device
+trees that need to be compatible with older software.
diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
new file mode 100644
index 0000000000..29416f9c32
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
@@ -0,0 +1,31 @@
+* Atmel GPIO controller (PIO)
+
+Required properties:
+- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
+- reg: Should contain GPIO controller registers location and length
+- interrupts: Should be the port interrupt shared by all the pins.
+- #gpio-cells: Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters to declare if the GPIO
+  is active high or low. See gpio.txt.
+- gpio-controller: Marks the device node as a GPIO controller.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two. The first cell is the pin number and the
+  second cell is used to specify irq type flags, see the two cell description
+  in interrupt-controller/interrupts.txt for details.
+
+optional properties:
+- #gpio-lines: Number of gpio if absent 32.
+
+
+Example:
+	pioA: gpio@fffff200 {
+		compatible = "atmel,at91rm9200-gpio";
+		reg = <0xfffff200 0x100>;
+		interrupts = <2 4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#gpio-lines = <19>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
diff --git a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
new file mode 100644
index 0000000000..49819367a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
@@ -0,0 +1,43 @@
+NXP LPC32xx SoC GPIO controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-gpio"
+- reg: Physical base address and length of the controller's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be 3:
+   1) bank:
+      0: GPIO P0
+      1: GPIO P1
+      2: GPIO P2
+      3: GPIO P3
+      4: GPI P3
+      5: GPO P3
+   2) pin number
+   3) optional parameters:
+      - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- reg: Index of the GPIO group
+
+Example:
+
+	gpio: gpio@40028000 {
+		compatible = "nxp,lpc3220-gpio";
+		reg = <0x40028000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <3>; /* bank, pin, flags */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
new file mode 100644
index 0000000000..735d97d645
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/hisilicon,ascend910-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common GPIO controller
+
+maintainers:
+  - Jay Fang <f.fangjian@huawei.com>
+
+description:
+  The HiSilicon common GPIO controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio@840d0000 {
+      compatible = "hisilicon,ascend910-gpio";
+      reg = <0x840d0000 0x1000>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
new file mode 100644
index 0000000000..d58b3958f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
@@ -0,0 +1,24 @@
+* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs
+
+All GPIOs are pin-shared with other functions. DCRs control whether a
+particular pin that has GPIO capabilities acts as a GPIO or is used for
+another purpose. GPIO outputs are separately programmable to emulate
+an open-drain driver.
+
+Required properties:
+	- compatible: must be "ibm,ppc4xx-gpio"
+	- reg: address and length of the register set for the device
+	- #gpio-cells: must be set to 2. The first cell is the pin number
+		and the second cell is used to specify the gpio polarity:
+		0 = active high
+		1 = active low
+	- gpio-controller: marks the device node as a gpio controller.
+
+Example:
+
+GPIO0: gpio@ef600b00 {
+	compatible = "ibm,ppc4xx-gpio";
+	reg = <0xef600b00 0x00000048>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml b/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml
new file mode 100644
index 0000000000..d38de81446
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/idt,32434-gpio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/idt,32434-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79RC32434 GPIO controller
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: idt,32434-gpio
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pic
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@50004 {
+        compatible = "idt,32434-gpio";
+        reg = <0x50004 0x10>, <0x38030 0x0c>;
+        reg-names = "gpio", "pic";
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <6>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ngpios = <14>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
new file mode 100644
index 0000000000..8dc41ed996
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
@@ -0,0 +1,38 @@
+Intel IXP4xx XScale Networking Processors GPIO
+
+This GPIO controller is found in the Intel IXP4xx processors.
+It supports 16 GPIO lines.
+
+The interrupt portions of the GPIO controller is hierarchical:
+the synchronous edge detector is part of the GPIO block, but the
+actual enabling/disabling of the interrupt line is done in the
+main IXP4xx interrupt controller which has a 1:1 mapping for
+the first 12 GPIO lines to 12 system interrupts.
+
+The remaining 4 GPIO lines can not be used for receiving
+interrupts.
+
+The interrupt parent of this GPIO controller must be the
+IXP4xx interrupt controller.
+
+Required properties:
+
+- compatible : Should be
+  "intel,ixp4xx-gpio"
+- reg : Should contain registers location and length
+- gpio-controller : marks this as a GPIO controller
+- #gpio-cells : Should be 2, see gpio/gpio.txt
+- interrupt-controller : marks this as an interrupt controller
+- #interrupt-cells : a standard two-cell interrupt, see
+  interrupt-controller/interrupts.txt
+
+Example:
+
+gpio0: gpio@c8004000 {
+	compatible = "intel,ixp4xx-gpio";
+	reg = <0xc8004000 0x1000>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
new file mode 100644
index 0000000000..b032471831
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  There are three flavors of the GPIO controller, one full featured
+  input/output with interrupt support (kontron,sl28cpld-gpio), one
+  output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+  Each controller supports 8 GPIO lines.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-gpio
+      - kontron,sl28cpld-gpi
+      - kontron,sl28cpld-gpo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
new file mode 100644
index 0000000000..fb86e8ce63
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/loongson,ls-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson GPIO controller.
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-gpio
+      - loongson,ls7a-gpio
+
+  reg:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 64
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - compatible
+  - reg
+  - ngpios
+  - "#gpio-cells"
+  - gpio-controller
+  - gpio-ranges
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio0: gpio@1fe00500 {
+      compatible = "loongson,ls2k-gpio";
+      reg = <0x1fe00500 0x38>;
+      ngpios = <64>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pctrl 0 0 15>,
+                    <&pctrl 16 16 15>,
+                    <&pctrl 32 32 10>,
+                    <&pctrl 44 44 20>;
+      interrupt-parent = <&liointc1>;
+      interrupts = <28 IRQ_TYPE_LEVEL_LOW>,
+                   <29 IRQ_TYPE_LEVEL_LOW>,
+                   <30 IRQ_TYPE_LEVEL_LOW>,
+                   <30 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
new file mode 100644
index 0000000000..1a472c0569
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/loongson,ls1x-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 GPIO controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+properties:
+  compatible:
+    const: loongson,ls1x-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fd010c0 {
+        compatible = "loongson,ls1x-gpio";
+        reg = <0x1fd010c0 0x4>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ngpios = <32>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml
new file mode 100644
index 0000000000..5bbb2a3126
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mediatek,mt7621-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mediatek,mt7621-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7621 SoC GPIO controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The IP core used inside these SoCs has 3 banks of 32 GPIOs each.
+  The registers of all the banks are interwoven inside one single IO range.
+  We load one GPIO controller instance per bank. Also the GPIO controller can receive
+  interrupts on any of the GPIOs, either edge or level. It then interrupts the CPU
+  using GIC INT12.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: mediatek,mt7621-gpio
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-ranges: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+  - gpio-ranges
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    gpio@600 {
+      compatible = "mediatek,mt7621-gpio";
+      reg = <0x600 0x100>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 95>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
new file mode 100644
index 0000000000..d481e78958
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg 25>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
new file mode 100644
index 0000000000..dd031fc93b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
@@ -0,0 +1,49 @@
+* Microchip PIC32 GPIO devices (PIO).
+
+Required properties:
+ - compatible: "microchip,pic32mzda-gpio"
+ - reg: Base address and length for the device.
+ - interrupts: The port interrupt shared by all pins.
+ - gpio-controller: Marks the port as GPIO controller.
+ - #gpio-cells: Two. The first cell is the pin number and
+   the second cell is used to specify the gpio polarity as defined in
+   defined in <dt-bindings/gpio/gpio.h>:
+      0 = GPIO_ACTIVE_HIGH
+      1 = GPIO_ACTIVE_LOW
+      2 = GPIO_OPEN_DRAIN
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - #interrupt-cells: Two. The first cell is the GPIO number and second cell
+   is used to specify the trigger type as defined in
+   <dt-bindings/interrupt-controller/irq.h>:
+      IRQ_TYPE_EDGE_RISING
+      IRQ_TYPE_EDGE_FALLING
+      IRQ_TYPE_EDGE_BOTH
+ - clocks: Clock specifier (see clock bindings for details).
+ - microchip,gpio-bank: Specifies which bank a controller owns.
+ - gpio-ranges: Interaction with the PINCTRL subsystem.
+
+Example:
+
+/* PORTA */
+gpio0: gpio0@1f860000 {
+	compatible = "microchip,pic32mzda-gpio";
+	reg = <0x1f860000 0x100>;
+	interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+	#gpio-cells = <2>;
+	gpio-controller;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	clocks = <&rootclk PB4CLK>;
+	microchip,gpio-bank = <0>;
+	gpio-ranges = <&pic32_pinctrl 0 0 16>;
+};
+
+keys {
+	...
+
+	button@sw1 {
+		label = "ESC";
+		linux,code = <1>;
+		gpios = <&gpio0 12 0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
new file mode 100644
index 0000000000..9cf6137dd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+  - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - intel,pxa25x-gpio
+              - intel,pxa26x-gpio
+              - intel,pxa27x-gpio
+              - intel,pxa3xx-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: gpio0
+            - const: gpio1
+            - const: gpio_mux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,mmp-gpio
+              - marvell,mmp2-gpio
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: gpio_mux
+
+properties:
+  $nodename:
+    pattern: '^gpio@[0-9a-f]+$'
+
+  compatible:
+    enum:
+      - intel,pxa25x-gpio
+      - intel,pxa26x-gpio
+      - intel,pxa27x-gpio
+      - intel,pxa3xx-gpio
+      - marvell,mmp-gpio
+      - marvell,mmp2-gpio
+      - marvell,pxa93x-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/pxa-clock.h>
+    gpio@40e00000 {
+        compatible = "intel,pxa3xx-gpio";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x40e00000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <8>, <9>, <10>;
+        interrupt-names = "gpio0", "gpio1", "gpio_mux";
+        clocks = <&clks CLK_GPIO>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+  - |
+    #include <dt-bindings/clock/marvell,pxa910.h>
+    gpio@d4019000 {
+        compatible = "marvell,mmp-gpio";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xd4019000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <49>;
+        interrupt-names = "gpio_mux";
+        clocks = <&soc_clocks PXA910_CLK_GPIO>;
+        resets = <&soc_clocks PXA910_CLK_GPIO>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        ranges;
+
+        gpio@d4019000 {
+            reg = <0xd4019000 0x4>;
+        };
+
+        gpio@d4019004 {
+            reg = <0xd4019004 0x4>;
+        };
+
+        gpio@d4019008 {
+            reg = <0xd4019008 0x4>;
+        };
+
+        gpio@d4019100 {
+            reg = <0xd4019100 0x4>;
+        };
+     };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
new file mode 100644
index 0000000000..18fe90387b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mstar,msc313-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/SigmaStar GPIO controller
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - mstar,msc313-gpio
+      - sstar,ssd20xd-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/msc313-gpio.h>
+
+    gpio: gpio@207800 {
+      compatible = "mstar,msc313-gpio";
+      #gpio-cells = <2>;
+      reg = <0x207800 0x200>;
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 36 22>,
+                    <&pinctrl 22 63 4>,
+                    <&pinctrl 26 68 6>;
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&intc_fiq>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
new file mode 100644
index 0000000000..50ec2e6907
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
@@ -0,0 +1,22 @@
+Binding for the GPIO extension bus found on some LaCie/Seagate boards
+(Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-gpio-ext".
+- addr-gpios: GPIOs representing the address register (LSB -> MSB).
+- data-gpios: GPIOs representing the data register (LSB -> MSB).
+- enable-gpio: latches the new configuration (address, data) on raising edge.
+
+Example:
+
+netxbig_gpio_ext: netxbig-gpio-ext {
+	compatible = "lacie,netxbig-gpio-ext";
+
+	addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+		      &gpio1 16 GPIO_ACTIVE_HIGH
+		      &gpio1 17 GPIO_ACTIVE_HIGH>;
+	data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+		      &gpio1 13 GPIO_ACTIVE_HIGH
+		      &gpio1 14 GPIO_ACTIVE_HIGH>;
+	enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
new file mode 100644
index 0000000000..df63da4630
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
@@ -0,0 +1,26 @@
+Nintendo Wii (Hollywood) GPIO controller
+
+Required properties:
+- compatible: "nintendo,hollywood-gpio"
+- reg: Physical base address and length of the controller's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+
+Optional properties:
+- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
+  interrupt.
+
+Example:
+
+	GPIO: gpio@d8000c0 {
+		#gpio-cells = <2>;
+		compatible = "nintendo,hollywood-gpio";
+		reg = <0x0d8000c0 0x40>;
+		gpio-controller;
+		ngpios = <24>;
+	}
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
new file mode 100644
index 0000000000..4ef06b2ff1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra186-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra186 and later)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  Tegra186 contains two GPIO controllers; a main controller and an "AON"
+  controller. This binding document applies to both controllers. The register
+  layouts for the controllers share many similarities, but also some
+  significant differences. Hence, this document describes closely related but
+  different bindings and compatible values.
+
+  The Tegra186 GPIO controller allows software to set the IO direction of,
+  and read/write the value of, numerous GPIO signals. Routing of GPIO signals
+  to package balls is under the control of a separate pin controller hardware
+  block. Two major sets of registers exist:
+
+    a) Security registers, which allow configuration of allowed access to the
+       GPIO register set. These registers exist in a single contiguous block
+       of physical address space. The size of this block, and the security
+       features available, varies between the different GPIO controllers.
+
+       Access to this set of registers is not necessary in all circumstances.
+       Code that wishes to configure access to the GPIO registers needs access
+       to these registers to do so. Code which simply wishes to read or write
+       GPIO data does not need access to these registers.
+
+    b) GPIO registers, which allow manipulation of the GPIO signals. In some
+       GPIO controllers, these registers are exposed via multiple "physical
+       aliases" in address space, each of which access the same underlying
+       state. See the hardware documentation for rationale. Any particular
+       GPIO client is expected to access just one of these physical aliases.
+
+    Tegra HW documentation describes a unified naming convention for all GPIOs
+    implemented by the SoC. Each GPIO is assigned to a port, and a port may
+    control a number of GPIOs. Thus, each GPIO is named according to an
+    alphabetical port name and an integer GPIO name within the port. For
+    example, GPIO_PA0, GPIO_PN6, or GPIO_PCC3.
+
+    The number of ports implemented by each GPIO controller varies. The number
+    of implemented GPIOs within each port varies. GPIO registers within a
+    controller are grouped and laid out according to the port they affect.
+
+    The mapping from port name to the GPIO controller that implements that
+    port, and the mapping from port name to register offset within a
+    controller, are both extremely non-linear. The header file
+    <dt-bindings/gpio/tegra186-gpio.h> describes the port-level mapping. In
+    that file, the naming convention for ports matches the HW documentation.
+    The values chosen for the names are alphabetically sorted within a
+    particular controller. Drivers need to map between the DT GPIO IDs and HW
+    register offsets using a lookup table.
+
+    Each GPIO controller can generate a number of interrupt signals. Each
+    signal represents the aggregate status for all GPIOs within a set of
+    ports. Thus, the number of interrupt signals generated by a controller
+    varies as a rough function of the number of ports it implements. Note
+    that the HW documentation refers to both the overall controller HW
+    module and the sets-of-ports as "controllers".
+
+    Each GPIO controller in fact generates multiple interrupts signals for
+    each set of ports. Each GPIO may be configured to feed into a specific
+    one of the interrupt signals generated by a set-of-ports. The intent is
+    for each generated signal to be routed to a different CPU, thus allowing
+    different CPUs to each handle subsets of the interrupts within a port.
+    The status of each of these per-port-set signals is reported via a
+    separate register. Thus, a driver needs to know which status register to
+    observe. This binding currently defines no configuration mechanism for
+    this. By default, drivers should use register
+    GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+    define a property to configure this.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-gpio
+      - nvidia,tegra186-gpio-aon
+      - nvidia,tegra194-gpio
+      - nvidia,tegra194-gpio-aon
+      - nvidia,tegra234-gpio
+      - nvidia,tegra234-gpio-aon
+
+  reg-names:
+    items:
+      - const: security
+      - const: gpio
+    minItems: 1
+
+  reg:
+    items:
+      - description: Security configuration registers.
+      - description: |
+          GPIO control registers. This may cover either:
+
+            a) The single physical alias that this OS should use.
+            b) All physical aliases that exist in the controller. This is
+               appropriate when the OS is responsible for managing assignment
+               of the physical aliases.
+    minItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the HW block, one per set of
+      ports, in the order the HW manual describes them. The number of entries
+      required varies depending on compatible value.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: |
+      Indicates how many cells are used in a consumer's GPIO specifier. In the
+      specifier:
+
+        - The first cell is the pin number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell contains flags:
+          - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      Indicates how many cells are used in a consumer's interrupt specifier.
+      In the specifier:
+
+        - The first cell is the GPIO number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell is contains flags:
+          - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+
+            Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio
+              - nvidia,tegra194-gpio
+              - nvidia,tegra234-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 48
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio-aon
+              - nvidia,tegra194-gpio-aon
+              - nvidia,tegra234-gpio-aon
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@2200000 {
+        compatible = "nvidia,tegra186-gpio";
+        reg-names = "security", "gpio";
+        reg = <0x2200000 0x10000>,
+              <0x2210000 0x10000>;
+        interrupts = <0  47 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  50 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  53 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  56 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  59 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    gpio@c2f0000 {
+        compatible = "nvidia,tegra186-gpio-aon";
+        reg-names = "security", "gpio";
+        reg = <0xc2f0000 0x1000>,
+              <0xc2f1000 0x1000>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
new file mode 100644
index 0000000000..94b51749ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra20-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra20 - Tegra210)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-gpio
+          - nvidia,tegra30-gpio
+
+      - items:
+          - enum:
+              - nvidia,tegra114-gpio
+              - nvidia,tegra124-gpio
+              - nvidia,tegra210-gpio
+          - const: nvidia,tegra30-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the controller. For Tegra20,
+      there should be 7 interrupts specified, and for Tegra30, there should
+      be 8 interrupts specified.
+
+  "#gpio-cells":
+    description: The first cell is the pin number and the second cell is used
+      to specify the GPIO polarity (0 = active high, 1 = active low).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  "#interrupt-cells":
+    description: |
+      Should be 2. The first cell is the GPIO number. The second cell is
+      used to specify flags:
+
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  interrupt-controller: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties:
+  type: object
+  required:
+    - gpio-hog
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@6000d000 {
+        compatible = "nvidia,tegra20-gpio";
+        reg = <0x6000d000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
new file mode 100644
index 0000000000..627efc78ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
@@ -0,0 +1,59 @@
+NXP LPC18xx/43xx GPIO controller Device Tree Bindings
+-----------------------------------------------------
+
+Required properties:
+- compatible		: Should be "nxp,lpc1850-gpio"
+- reg			: List of addresses and lengths of the GPIO controller
+			  register sets
+- reg-names		: Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
+			  "gpio-gpoup1-ic"
+- clocks		: Phandle and clock specifier pair for GPIO controller
+- resets		: Phandle and reset specifier pair for GPIO controller
+- gpio-controller	: Marks the device node as a GPIO controller
+- #gpio-cells 		: Should be two:
+			  - The first cell is the GPIO line number
+			  - The second cell is used to specify polarity
+- interrupt-controller	: Marks the device node as an interrupt controller
+- #interrupt-cells	: Should be two:
+			  - The first cell is an interrupt number within
+			    0..9 range, for GPIO pin interrupts it is equal
+			    to 'nxp,gpio-pin-interrupt' property value of
+			    GPIO pin configuration, 8 is for GPIO GROUP0
+			    interrupt, 9 is for GPIO GROUP1 interrupt
+			  - The second cell is used to specify interrupt type
+
+Optional properties:
+- gpio-ranges		: Mapping between GPIO and pinctrl
+
+Example:
+#define LPC_GPIO(port, pin)	(port * 32 + pin)
+#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
+
+gpio: gpio@400f4000 {
+	compatible = "nxp,lpc1850-gpio";
+	reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
+	      <0x40088000 0x1000>, <0x40089000 0x1000>;
+	reg-names = "gpio", "gpio-pin-ic",
+		    "gpio-group0-ic", "gpio-gpoup1-ic";
+	clocks = <&ccu1 CLK_CPU_GPIO>;
+	resets = <&rgu 28>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
+			...
+			<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
+};
+
+gpio_joystick {
+	compatible = "gpio-keys";
+	...
+
+	button0 {
+		...
+		interrupt-parent = <&gpio>;
+		interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+		gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
new file mode 100644
index 0000000000..3718103e96
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCF857x-compatible I/O expanders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
+  driven high by a pull-up current source or driven low to ground. This
+  combines the direction and output level into a single bit per line, which
+  can't be read back. We can't actually know at initialization time whether a
+  line is configured (a) as output and driving the signal low/high, or (b) as
+  input and reporting a low/high value, without knowing the last value written
+  since the chip came out of reset (if any). The only reliable solution for
+  setting up line direction is thus to do it explicitly.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max7328
+      - maxim,max7329
+      - nxp,pca8574
+      - nxp,pca8575
+      - nxp,pca9670
+      - nxp,pca9671
+      - nxp,pca9672
+      - nxp,pca9673
+      - nxp,pca9674
+      - nxp,pca9675
+      - nxp,pcf8574
+      - nxp,pcf8574a
+      - nxp,pcf8575
+
+  reg:
+    maxItems: 1
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
+      and GPIO_ACTIVE_LOW flags are supported.
+
+  lines-initial-states:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask that specifies the initial state of each line.
+      When a bit is set to zero, the corresponding line will be initialized to
+      the input (pulled-up) state.
+      When the  bit is set to one, the line will be initialized to the
+      low-level output state.
+      If the property is not specified all lines will be initialized to the
+      input state.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  wakeup-source: true
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pcf8575: gpio@20 {
+                    compatible = "nxp,pcf8575";
+                    reg = <0x20>;
+                    interrupt-parent = <&irqpin2>;
+                    interrupts = <3 0>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    interrupt-controller;
+                    #interrupt-cells = <2>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
new file mode 100644
index 0000000000..bd35cbf7fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/pl061-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL061 GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rob Herring <robh@kernel.org>
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl061
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: arm,pl061
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 8
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml b/Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml
new file mode 100644
index 0000000000..32a566ec35
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/qcom,wcd934x-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WCD9340/WCD9341 GPIO controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
+  gpio controller to control 5 gpios on the chip.
+
+properties:
+  compatible:
+    enum:
+      - qcom,wcd9340-gpio
+      - qcom,wcd9341-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    wcdgpio: gpio@42 {
+        compatible = "qcom,wcd9340-gpio";
+        reg = <0x042 0x2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
new file mode 100644
index 0000000000..ce97265e23
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
@@ -0,0 +1,30 @@
+Raspberry Pi GPIO expander
+
+The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The
+firmware exposes a mailbox interface that allows the ARM core to control the
+GPIO lines on the expander.
+
+The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi
+firmware node.
+
+Required properties:
+
+- compatible : Should be "raspberrypi,firmware-gpio"
+- gpio-controller : Marks the device node as a gpio controller
+- #gpio-cells : Should be two.  The first cell is the pin number, and
+  the second cell is used to specify the gpio polarity:
+  0 = active high
+  1 = active low
+
+Example:
+
+firmware: firmware-rpi {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+
+	expgpio: gpio {
+		 compatible = "raspberrypi,firmware-gpio";
+		 gpio-controller;
+		 #gpio-cells = <2>;
+	 };
+};
diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
new file mode 100644
index 0000000000..39fd959c45
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto GPIO controller
+
+maintainers:
+  - Sander Vanheule <sander@svanheule.net>
+  - Bert Vermeulen <bert@biot.com>
+
+description: |
+  Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
+  of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
+  Each bank's interrupts are cascased into one interrupt line on the parent
+  interrupt controller, if provided.
+  This binding allows defining a single bank in the devicetree. The interrupt
+  controller is not supported on the fallback compatible name, which only
+  allows for GPIO port use.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - realtek,rtl8380-gpio
+          - realtek,rtl8390-gpio
+          - realtek,rtl9300-gpio
+          - realtek,rtl9310-gpio
+      - const: realtek,otto-gpio
+
+  reg: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: realtek,rtl9300-gpio
+then:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+        - description: interrupt CPU map
+else:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: [ interrupts ]
+
+examples:
+  - |
+      gpio@3500 {
+        compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+        reg = <0x3500 0x1c>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <23>;
+      };
+  - |
+      gpio@3300 {
+        compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+        reg = <0x3300 0x1c>, <0x3338 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <13>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml b/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
new file mode 100644
index 0000000000..8bdef812c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/renesas,em-gio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile General Purpose I/O Interface
+
+maintainers:
+  - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+  compatible:
+    const: renesas,em-gio
+
+  reg:
+    items:
+      - description: First set of contiguous registers
+      - description: Second set of contiguous registers
+
+  interrupts:
+    items:
+      - description: Interrupt for the first set of 16 GPIO ports
+      - description: Interrupt for the second set of 16 GPIO ports
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - ngpios
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio0: gpio@e0050000 {
+            compatible = "renesas,em-gio";
+            reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 32>;
+            ngpios = <32>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
new file mode 100644
index 0000000000..aa424e2b95
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/renesas,rcar-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car General-Purpose Input/Output Ports (GPIO)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,gpio-r8a7778      # R-Car M1
+              - renesas,gpio-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-gpio # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,gpio-r8a7742      # RZ/G1H
+              - renesas,gpio-r8a7743      # RZ/G1M
+              - renesas,gpio-r8a7744      # RZ/G1N
+              - renesas,gpio-r8a7745      # RZ/G1E
+              - renesas,gpio-r8a77470     # RZ/G1C
+              - renesas,gpio-r8a7790      # R-Car H2
+              - renesas,gpio-r8a7791      # R-Car M2-W
+              - renesas,gpio-r8a7792      # R-Car V2H
+              - renesas,gpio-r8a7793      # R-Car M2-N
+              - renesas,gpio-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-gpio # R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,gpio-r8a774a1     # RZ/G2M
+              - renesas,gpio-r8a774b1     # RZ/G2N
+              - renesas,gpio-r8a774c0     # RZ/G2E
+              - renesas,gpio-r8a774e1     # RZ/G2H
+              - renesas,gpio-r8a7795      # R-Car H3
+              - renesas,gpio-r8a7796      # R-Car M3-W
+              - renesas,gpio-r8a77961     # R-Car M3-W+
+              - renesas,gpio-r8a77965     # R-Car M3-N
+              - renesas,gpio-r8a77970     # R-Car V3M
+              - renesas,gpio-r8a77980     # R-Car V3H
+              - renesas,gpio-r8a77990     # R-Car E3
+              - renesas,gpio-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
+
+      - items:
+          - enum:
+              - renesas,gpio-r8a779a0     # R-Car V3U
+              - renesas,gpio-r8a779f0     # R-Car S4-8
+              - renesas,gpio-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-gpio # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  "^.*$":
+    if:
+      type: object
+    then:
+      properties:
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+      required:
+        - gpio-hog
+        - gpios
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,rcar-gen1-gpio
+then:
+  required:
+    - clocks
+    - power-domains
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a77470-sysc.h>
+    gpio3: gpio@e6053000 {
+            compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
+            reg = <0xe6053000 0x50>;
+            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 909>;
+            power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+            resets = <&cpg 909>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 96 30>;
+            gpio-reserved-ranges = <17 10>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+     };
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
new file mode 100644
index 0000000000..affd823c88
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip GPIO bank
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,gpio-bank
+      - rockchip,rk3188-gpio-bank0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: APB interface clock source
+      - description: GPIO debounce reference clock source
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@2000a000 {
+        compatible = "rockchip,rk3188-gpio-bank0";
+        reg = <0x2000a000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      gpio1: gpio@2003c000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x2003c000 0x100>;
+        interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 10>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
new file mode 100644
index 0000000000..d8cce73ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3328 General Register Files GPIO controller
+
+description:
+  The Rockchip RK3328 General Register File (GRF) outputs only the
+  GPIO_MUTE pin, originally for codec mute control, but it can also be used
+  for general purpose. It is manipulated by the GRF_SOC_CON10 register.
+  If needed in the future support for the HDMI pins can also be added.
+  The GPIO node should be declared as the child of the GRF node.
+
+  The GPIO_MUTE pin is referred to in the format
+
+  <&grf_gpio 0 GPIO_ACTIVE_LOW>
+
+  The first cell is the pin number and
+  the second cell is used to specify the GPIO polarity
+    0 = Active high
+    1 = Active low
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3328-grf-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    grf_gpio: gpio {
+      compatible = "rockchip,rk3328-grf-gpio";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
new file mode 100644
index 0000000000..fc095646ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sifive,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive GPIO controller
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+          - canaan,k210-gpiohs
+      - const: sifive,gpio0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    description:
+      The number of GPIOs available on the controller implementation.
+      It is 16 for the SiFive SoCs and 32 for the Canaan K210.
+    minimum: 1
+    maximum: 32
+    default: 16
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+then:
+  required:
+    - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/sifive-fu540-prci.h>
+      gpio@10060000 {
+        compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+        interrupt-parent = <&plic>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>, <21>, <22>;
+        reg = <0x10060000 0x1000>;
+        clocks = <&tlclk FU540_PRCI_CLK_TLCLK>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
new file mode 100644
index 0000000000..1b30812b01
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
@@ -0,0 +1,21 @@
+Synopsys GPIO via CREG (Control REGisters) driver
+
+Required properties:
+- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x".
+- reg : Exactly one register range with length 0x4.
+- #gpio-cells : Since the generic GPIO binding is used, the
+  amount of cells must be specified as 2. The first cell is the
+  pin number, the second cell is used to specify optional parameters:
+  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- gpio-controller : Marks the device node as a GPIO controller.
+- ngpios: Number of GPIO pins.
+
+Example:
+
+gpio: gpio@f00014b0 {
+	compatible = "snps,creg-gpio-hsdk";
+	reg = <0xf00014b0 0x4>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	ngpios = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
new file mode 100644
index 0000000000..eefe7b3452
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/snps,dw-apb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB GPIO controller
+
+description: |
+  Synopsys DesignWare GPIO controllers have a configurable number of ports,
+  each of which are intended to be represented as child nodes with the generic
+  GPIO-controller properties as described in this bindings file.
+
+maintainers:
+  - Hoan Tran <hoan@os.amperecomputing.com>
+  - Serge Semin <fancer.lancer@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: snps,dw-apb-gpio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: APB interface clock source
+      - description: DW GPIO debounce reference clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: bus
+      - const: db
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^gpio-(port|controller)@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: snps,dw-apb-gpio-port
+
+      reg:
+        maxItems: 1
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      gpio-line-names:
+        minItems: 1
+        maxItems: 32
+
+      ngpios:
+        default: 32
+        minimum: 1
+        maximum: 32
+
+      snps,nr-gpios:
+        description: The number of GPIO pins exported by the port.
+        deprecated: true
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 32
+        minimum: 1
+        maximum: 32
+
+      interrupts:
+        description: |
+          The interrupts to the parent controller raised when GPIOs generate
+          the interrupts. If the controller provides one combined interrupt
+          for all GPIOs, specify a single interrupt. If the controller provides
+          one interrupt for each GPIO, provide a list of interrupts that
+          correspond to each of the GPIO pins.
+        minItems: 1
+        maxItems: 32
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 2
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+    dependencies:
+      interrupt-controller: [ interrupts ]
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    gpio: gpio@20000 {
+      compatible = "snps,dw-apb-gpio";
+      reg = <0x20000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      porta: gpio-port@0 {
+        compatible = "snps,dw-apb-gpio-port";
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        snps,nr-gpios = <8>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&vic1>;
+        interrupts = <0>;
+      };
+
+      portb: gpio-port@1 {
+        compatible = "snps,dw-apb-gpio-port";
+        reg = <1>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        snps,nr-gpios = <8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
new file mode 100644
index 0000000000..228fa27ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/socionext,uniphier-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier GPIO controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: socionext,uniphier-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      The first cell defines the interrupt number.
+      The second cell bits[3:0] is used to specify trigger type as follows:
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 512
+
+  gpio-ranges: true
+
+  gpio-ranges-group-names: true
+
+  socionext,interrupt-ranges:
+    description: |
+      Specifies an interrupt number mapping between this GPIO controller and
+      its interrupt parent, in the form of arbitrary number of
+      <child-interrupt-base parent-interrupt-base length> triplets.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - ngpios
+  - gpio-ranges
+  - socionext,interrupt-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/gpio/uniphier-gpio.h>
+
+    gpio: gpio@55000000 {
+        compatible = "socionext,uniphier-gpio";
+        reg = <0x55000000 0x200>;
+        interrupt-parent = <&aidet>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 0>;
+        gpio-ranges-group-names = "gpio_range";
+        ngpios = <248>;
+        socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>;
+    };
+
+    // Consumer:
+    // Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC
+    // document. Unfortunately, only the one's place is octal in the port
+    // numbering. (That is, PORT 8, 9, 18, 19, 28, 29, ... do not exist.)
+    // UNIPHIER_GPIO_PORT() is a helper macro to calculate 29 * 8 + 4.
+    sdhci0_pwrseq {
+        compatible = "mmc-pwrseq-emmc";
+        reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/sodaville.txt b/Documentation/devicetree/bindings/gpio/sodaville.txt
new file mode 100644
index 0000000000..563eff22b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sodaville.txt
@@ -0,0 +1,48 @@
+GPIO controller on CE4100 / Sodaville SoCs
+==========================================
+
+The bindings for CE4100's GPIO controller match the generic description
+which is covered by the gpio.txt file in this folder.
+
+The only additional property is the intel,muxctl property which holds the
+value which is written into the MUXCNTL register.
+
+There is no compatible property for now because the driver is probed via
+PCI id (vendor 0x8086 device 0x2e67).
+
+The interrupt specifier consists of two cells encoded as follows:
+ - <1st cell>: The interrupt-number that identifies the interrupt source.
+ - <2nd cell>: The level-sense information, encoded as follows:
+		4 - active high level-sensitive
+		8 - active low level-sensitive
+
+Example of the GPIO device and one user:
+
+	pcigpio: gpio@b,1 {
+			/* two cells for GPIO and interrupt */
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			compatible = "pci8086,2e67.2",
+					   "pci8086,2e67",
+					   "pciclassff0000",
+					   "pciclassff00";
+
+			reg = <0x15900 0x0 0x0 0x0 0x0>;
+			/* Interrupt line of the gpio device */
+			interrupts = <15 1>;
+			/* It is an interrupt and GPIO controller itself */
+			interrupt-controller;
+			gpio-controller;
+			intel,muxctl = <0>;
+	};
+
+	testuser@20 {
+			compatible = "example,testuser";
+			/* User the 11th GPIO line as an active high triggered
+			 * level interrupt
+			 */
+			interrupts = <11 8>;
+			interrupt-parent = <&pcigpio>;
+			/* Use this GPIO also with the gpio functions */
+			gpios = <&pcigpio 11 0>;
+	};
diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt
new file mode 100644
index 0000000000..dd04d96e6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/spear_spics.txt
@@ -0,0 +1,49 @@
+=== ST Microelectronics SPEAr SPI CS Driver ===
+
+SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
+Cell spi controller through its system registers, which otherwise remains under
+PL022 control. If chipselect remain under PL022 control then they would be
+released as soon as transfer is over and TxFIFO becomes empty. This is not
+desired by some of the device protocols above spi which expect (multiple)
+transfers without releasing their chipselects.
+
+Chipselects can be controlled by software by turning them as GPIOs. SPEAr
+provides another interface through system registers through which software can
+directly control each PL022 chipselect. Hence, it is natural for SPEAr to export
+the control of this interface as gpio.
+
+Required properties:
+
+  * compatible: should be defined as "st,spear-spics-gpio"
+  * reg: mentioning address range of spics controller
+  * st-spics,peripcfg-reg: peripheral configuration register offset
+  * st-spics,sw-enable-bit: bit offset to enable sw control
+  * st-spics,cs-value-bit: bit offset to drive chipselect low or high
+  * st-spics,cs-enable-mask: chip select number bit mask
+  * st-spics,cs-enable-shift: chip select number program offset
+  * gpio-controller: Marks the device node as gpio controller
+  * #gpio-cells: should be 1 and will mention chip select number
+
+All the above bit offsets are within peripcfg register.
+
+Example:
+-------
+spics: spics@e0700000{
+        compatible = "st,spear-spics-gpio";
+        reg = <0xe0700000 0x1000>;
+        st-spics,peripcfg-reg = <0x3b0>;
+        st-spics,sw-enable-bit = <12>;
+        st-spics,cs-value-bit = <11>;
+        st-spics,cs-enable-mask = <3>;
+        st-spics,cs-enable-shift = <8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+};
+
+
+spi0: spi@e0100000 {
+        num-cs = <3>;
+        cs-gpios = <&gpio1 7 0>, <&spics 0>,
+                   <&spics 1>;
+	...
+}
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
new file mode 100644
index 0000000000..99fcf97077
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc EIC controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The EIC is the abbreviation of external interrupt controller, which can
+  be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
+  one is in digital chip, and another one is in PMIC. The digital chip EIC
+  controller contains 4 sub-modules, i.e. EIC-debounce, EIC-latch, EIC-async and
+  EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
+  module.
+
+  The EIC-debounce sub-module provides up to 8 source input signal
+  connections. A debounce mechanism is used to capture the input signals'
+  stable status (millisecond resolution) and a single-trigger mechanism
+  is introduced into this sub-module to enhance the input event detection
+  reliability. In addition, this sub-module's clock can be shut off
+  automatically to reduce power dissipation. Moreover the debounce range
+  is from 1ms to 4s with a step size of 1ms. The input signal will be
+  ignored if it is asserted for less than 1 ms.
+
+  The EIC-latch sub-module is used to latch some special power down signals
+  and generate interrupts, since the EIC-latch does not depend on the APB
+  clock to capture signals.
+
+  The EIC-async sub-module uses a 32kHz clock to capture the short signals
+  (microsecond resolution) to generate interrupts by level or edge trigger.
+
+  The EIC-sync is similar with GPIO's input function, which is a synchronized
+  signal input register. It can generate interrupts by level or edge trigger
+  when detecting input signals.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sprd,sc9860-eic-debounce
+          - sprd,sc9860-eic-latch
+          - sprd,sc9860-eic-async
+          - sprd,sc9860-eic-sync
+          - sprd,sc2731-eic
+      - items:
+          - enum:
+              - sprd,ums512-eic-debounce
+          - const: sprd,sc9860-eic-debounce
+      - items:
+          - enum:
+              - sprd,ums512-eic-latch
+          - const: sprd,sc9860-eic-latch
+      - items:
+          - enum:
+              - sprd,ums512-eic-async
+          - const: sprd,sc9860-eic-async
+      - items:
+          - enum:
+              - sprd,ums512-eic-sync
+          - const: sprd,sc9860-eic-sync
+      - items:
+          - enum:
+              - sprd,sc2730-eic
+          - const: sprd,sc2731-eic
+
+  reg:
+    minItems: 1
+    maxItems: 3
+    description:
+      EIC controller can support maximum 3 banks which has its own
+      address base.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description:
+      The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        eic_debounce: gpio@40210000 {
+            compatible = "sprd,sc9860-eic-debounce";
+            reg = <0 0x40210000 0 0x80>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
new file mode 100644
index 0000000000..4831688381
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc GPIO controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The controller's registers are organized as sets of sixteen 16-bit
+  registers with each set controlling a bank of up to 16 pins. A single
+  interrupt is shared for all of the banks handled by the controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: sprd,sc9860-gpio
+      - items:
+          - enum:
+              - sprd,ums512-gpio
+          - const: sprd,sc9860-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ap_gpio: gpio@40280000 {
+            compatible = "sprd,sc9860-gpio";
+            reg = <0 0x40280000 0 0x1000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
new file mode 100644
index 0000000000..4555f1644a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE) GPIO Block
+
+description:
+  STMicroelectronics Port Expander (STMPE) is a series of slow
+  bus controllers for various expanded peripherals such as GPIO, keypad,
+  touchscreen, ADC, PWM or rotator. It can contain one or several different
+  peripherals connected to SPI or I2C. These bindings pertain to the
+  GPIO portions of these expanders.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: st,stmpe-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 24
+
+  interrupt-controller: true
+
+  st,norequest-mask:
+    description:
+      A bitmask of GPIO lines that cannot be requested because for
+      for example not being connected to anything on the system
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - "#interrupt-cells"
+  - gpio-controller
+  - interrupt-controller
diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
new file mode 100644
index 0000000000..7b75d2f92f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP GPIO controller
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The general-purpose interface combines general-purpose input/output (GPIO) banks.
+  Each GPIO banks provides up to 32 dedicated general-purpose pins with input
+  and output capabilities; interrupt generation in active mode and wake-up
+  request generation in idle mode upon the detection of external events.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2-gpio
+          - ti,omap3-gpio
+          - ti,omap4-gpio
+      - items:
+          - const: ti,am4372-gpio
+          - const: ti,omap4-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  ti,gpio-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if a GPIO bank is always powered and will never lose its logic state.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Name of the hwmod associated with the GPIO. Needed on some legacy OMAP
+      SoCs which have not been converted to the ti,sysc interconnect hierarchy.
+
+  ti,no-reset-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which
+      have not been converted to the ti,sysc interconnect hierarchy.
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio0: gpio@0 {
+        compatible = "ti,omap4-gpio";
+        reg = <0x0 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <96>;
+        ti,gpio-always-on;
+
+        ls-buf-en-hog {
+            gpio-hog;
+            gpios = <10 GPIO_ACTIVE_HIGH>;
+            output-high;
+            line-name = "LS_BUF_EN";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
new file mode 100644
index 0000000000..b085450b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/toshiba,gpio-visconti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti ARM SoCs GPIO controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,gpio-tmpv7708
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    description:
+      interrupt mapping one per GPIO.
+    minItems: 16
+    maxItems: 16
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-ranges
+  - gpio-controller
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+      soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gpio: gpio@28020000 {
+          compatible = "toshiba,gpio-tmpv7708";
+          reg = <0 0x28020000 0 0x1000>;
+          #gpio-cells = <0x2>;
+          gpio-ranges = <&pmux 0 0 32>;
+          gpio-controller;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupt-parent = <&gic>;
+        };
+      };
+...
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
new file mode 100644
index 0000000000..5eeb29bcdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AXP209 GPIO
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number and the second is the GPIO flags.
+
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp209-gpio
+          - x-powers,axp221-gpio
+          - x-powers,axp813-gpio
+      - items:
+          - enum:
+              - x-powers,axp223-gpio
+              - x-powers,axp809-gpio
+          - const: x-powers,axp221-gpio
+      - items:
+          - const: x-powers,axp803-gpio
+          - const: x-powers,axp813-gpio
+
+  gpio-controller: true
+
+patternProperties:
+  "^.*-pins?$":
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      pins:
+        items:
+          enum:
+            - GPIO0
+            - GPIO1
+            - GPIO2
+            - GPIO3
+
+      function:
+        enum:
+          - adc
+          - ldo
+          - gpio_in
+          - gpio_out
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
new file mode 100644
index 0000000000..d3d8a2e143
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI GPIO controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+  The AXI GPIO design provides a general purpose input/output interface
+  to an AXI4-Lite interface. The AXI GPIO can be configured as either
+  a single or a dual-channel device. The width of each channel is
+  independently configurable. The channels can be configured to
+  generate an interrupt when a transition on any of their inputs occurs.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-gpio-1.00.a
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 1
+    maxItems: 64
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  interrupt-names: true
+
+  xlnx,all-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in input mode.
+
+  xlnx,all-inputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in input mode.
+
+  xlnx,all-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in output mode.
+
+  xlnx,all-outputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in output mode.
+
+  xlnx,dout-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel1.
+    default: 0
+
+  xlnx,dout-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel2.
+    default: 0
+
+  xlnx,gpio-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel1.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,gpio2-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel2.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,interrupt-present:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables interrupt control logic
+                 and interrupt registers in GPIO module.
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,is-dual:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables a second GPIO channel (GPIO2).
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,tri-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel1.
+
+  xlnx,tri-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel2.
+
+required:
+  - reg
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        gpio@a0020000 {
+            compatible = "xlnx,xps-gpio-1.00.a";
+            reg = <0xa0020000 0x10000>;
+            #gpio-cells = <2>;
+            #interrupt-cells = <0x2>;
+            clocks = <&zynqmp_clk 71>;
+            gpio-controller;
+            interrupt-controller;
+            interrupt-names = "ip2intc_irpt";
+            interrupt-parent = <&gic>;
+            interrupts = <0 89 4>;
+            xlnx,all-inputs = <0x0>;
+            xlnx,all-inputs-2 = <0x0>;
+            xlnx,all-outputs = <0x0>;
+            xlnx,all-outputs-2 = <0x0>;
+            xlnx,dout-default = <0x0>;
+            xlnx,dout-default-2 = <0x0>;
+            xlnx,gpio-width = <0x20>;
+            xlnx,gpio2-width = <0x20>;
+            xlnx,interrupt-present = <0x1>;
+            xlnx,is-dual = <0x1>;
+            xlnx,tri-default = <0xFFFFFFFF>;
+            xlnx,tri-default-2 = <0xFFFFFFFF>;
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
new file mode 100644
index 0000000000..56143f1fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZynqMP Mode Pin GPIO controller
+
+description:
+  PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
+  GPIO controller with configurable from numbers of pins (from 0 to 3 per
+  PS_MODE). Every pin can be configured as input/output.
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-gpio-modepin
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp-firmware {
+        gpio {
+            compatible = "xlnx,zynqmp-gpio-modepin";
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
new file mode 100644
index 0000000000..59c79a6943
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xylon LogiCVC GPIO controller
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The LogiCVC GPIO describes the GPIO block included in the LogiCVC display
+  controller. These are meant to be used for controlling display-related
+  signals.
+
+  The controller exposes GPIOs from the display and power control registers,
+  which are mapped by the driver as follows:
+  - GPIO[4:0] (display control) mapped to index 0-4
+  - EN_BLIGHT (power control) mapped to index 5
+  - EN_VDD (power control) mapped to index 6
+  - EN_VEE (power control) mapped to index 7
+  - V_EN (power control) mapped to index 8
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - xylon,logicvc-3.02.a-gpio
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 9
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      logicvc_gpio: gpio@40 {
+        compatible = "xylon,logicvc-3.02.a-gpio";
+        reg = <0x40 0x40>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-line-names = "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4",
+               "EN_BLIGHT", "EN_VDD", "EN_VEE", "V_EN";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
new file mode 100644
index 0000000000..e796a1ff8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Bifrost GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-g12a-mali
+              - mediatek,mt8183-mali
+              - mediatek,mt8183b-mali
+              - mediatek,mt8186-mali
+              - realtek,rtd1619-mali
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+              - rockchip,px30-mali
+              - rockchip,rk3568-mali
+          - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8195-mali
+          - const: mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+      - description: Event interrupt
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+      - const: event
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names: true
+
+  mali-supply: true
+
+  sram-supply: true
+
+  operating-points-v2: true
+
+  power-domains:
+    minItems: 1
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 2
+    maxItems: 5
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names: true
+
+  "#cooling-cells":
+    const: 2
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  dma-coherent: true
+
+  nvmem-cell-names:
+    items:
+      - const: speed-bin
+
+  nvmem-cells:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amlogic,meson-g12a-mali
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+            - const: bus_ace
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: rst
+            - const: axi_rst
+            - const: ace_rst
+      required:
+        - clock-names
+        - power-domains
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+
+      required:
+        - sram-supply
+        - power-domains
+        - power-domain-names
+    else:
+      properties:
+        sram-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183b-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8186-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 2
+          maxItems: 2
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 5
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+            - const: core3
+            - const: core4
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+      required:
+        - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu@ffe40000 {
+      compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+      reg = <0xffe40000 0x10000>;
+      interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "job", "mmu", "gpu";
+      clocks = <&clk 1>;
+      mali-supply = <&vdd_gpu>;
+      operating-points-v2 = <&gpu_opp_table>;
+      resets = <&reset 0>, <&reset 1>;
+    };
+
+    gpu_opp_table: opp-table {
+      compatible = "operating-points-v2";
+
+      opp-533000000 {
+        opp-hz = /bits/ 64 <533000000>;
+        opp-microvolt = <1250000>;
+      };
+      opp-450000000 {
+        opp-hz = /bits/ 64 <450000000>;
+        opp-microvolt = <1150000>;
+      };
+      opp-400000000 {
+        opp-hz = /bits/ 64 <400000000>;
+        opp-microvolt = <1125000>;
+      };
+      opp-350000000 {
+        opp-hz = /bits/ 64 <350000000>;
+        opp-microvolt = <1075000>;
+      };
+      opp-266000000 {
+        opp-hz = /bits/ 64 <266000000>;
+        opp-microvolt = <1025000>;
+      };
+      opp-160000000 {
+        opp-hz = /bits/ 64 <160000000>;
+        opp-microvolt = <925000>;
+      };
+      opp-100000000 {
+        opp-hz = /bits/ 64 <100000000>;
+        opp-microvolt = <912500>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
new file mode 100644
index 0000000000..ca02baba55
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-midgard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Midgard GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-mali
+          - const: arm,mali-t604
+      - items:
+          - enum:
+              - samsung,exynos5420-mali
+          - const: arm,mali-t628
+      - items:
+          - enum:
+              - allwinner,sun50i-h6-mali
+          - const: arm,mali-t720
+      - items:
+          - enum:
+              - amlogic,meson-gxm-mali
+              - realtek,rtd1295-mali
+          - const: arm,mali-t820
+      - items:
+          - enum:
+              - arm,juno-mali
+          - const: arm,mali-t624
+      - items:
+          - enum:
+              - rockchip,rk3288-mali
+              - samsung,exynos5433-mali
+          - const: arm,mali-t760
+      - items:
+          - enum:
+              - rockchip,rk3399-mali
+          - const: arm,mali-t860
+
+          # "arm,mali-t830"
+          # "arm,mali-t880"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: bus
+
+  mali-supply: true
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+
+  "#cooling-cells":
+    const: 2
+
+  dma-coherent: true
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+      required:
+        - clock-names
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amlogic,meson-gxm-mali
+    then:
+      properties:
+        resets:
+          minItems: 2
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu@ffa30000 {
+      compatible = "rockchip,rk3288-mali", "arm,mali-t760";
+      reg = <0xffa30000 0x10000>;
+      interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "job", "mmu", "gpu";
+      clocks = <&cru 0>;
+      mali-supply = <&vdd_gpu>;
+      operating-points-v2 = <&gpu_opp_table>;
+      power-domains = <&power 0>;
+      #cooling-cells = <2>;
+    };
+
+    gpu_opp_table: opp-table {
+      compatible = "operating-points-v2";
+
+      opp-533000000 {
+        opp-hz = /bits/ 64 <533000000>;
+        opp-microvolt = <1250000>;
+      };
+      opp-450000000 {
+        opp-hz = /bits/ 64 <450000000>;
+        opp-microvolt = <1150000>;
+      };
+      opp-400000000 {
+        opp-hz = /bits/ 64 <400000000>;
+        opp-microvolt = <1125000>;
+      };
+      opp-350000000 {
+        opp-hz = /bits/ 64 <350000000>;
+        opp-microvolt = <1075000>;
+      };
+      opp-266000000 {
+        opp-hz = /bits/ 64 <266000000>;
+        opp-microvolt = <1025000>;
+      };
+      opp-160000000 {
+        opp-hz = /bits/ 64 <160000000>;
+        opp-microvolt = <925000>;
+      };
+      opp-100000000 {
+        opp-hz = /bits/ 64 <100000000>;
+        opp-microvolt = <912500>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
new file mode 100644
index 0000000000..0fae1ef013
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-utgard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Utgard GPU
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+  - Maxime Ripard <mripard@kernel.org>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+  compatible:
+    oneOf:
+      - items:
+          - const: allwinner,sun8i-a23-mali
+          - const: allwinner,sun7i-a20-mali
+          - const: arm,mali-400
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-mali
+              - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-h3-mali
+              - allwinner,sun8i-r40-mali
+              - allwinner,sun50i-a64-mali
+              - rockchip,rk3036-mali
+              - rockchip,rk3066-mali
+              - rockchip,rk3188-mali
+              - rockchip,rk3228-mali
+              - samsung,exynos4210-mali
+              - stericsson,db8500-mali
+              - xlnx,zynqmp-mali
+          - const: arm,mali-400
+      - items:
+          - enum:
+              - allwinner,sun50i-h5-mali
+              - amlogic,meson8-mali
+              - amlogic,meson8b-mali
+              - amlogic,meson-gxbb-mali
+              - amlogic,meson-gxl-mali
+              - hisilicon,hi6220-mali
+              - mediatek,mt7623-mali
+              - rockchip,rk3328-mali
+          - const: arm,mali-450
+
+      # "arm,mali-300"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 20
+
+  interrupt-names:
+    allOf:
+      - additionalItems: true
+        minItems: 4
+        maxItems: 20
+        items:
+          # At least enforce the first 2 interrupts
+          - const: gp
+          - const: gpmmu
+      - items:
+          # Not ideal as any order and combination are allowed
+          enum:
+            - gp        # Geometry Processor interrupt
+            - gpmmu     # Geometry Processor MMU interrupt
+            - pp        # Pixel Processor broadcast interrupt (mali-450 only)
+            - pp0       # Pixel Processor X interrupt (X from 0 to 7)
+            - ppmmu0    # Pixel Processor X MMU interrupt (X from 0 to 7)
+            - pp1
+            - ppmmu1
+            - pp2
+            - ppmmu2
+            - pp3
+            - ppmmu3
+            - pp4
+            - ppmmu4
+            - pp5
+            - ppmmu5
+            - pp6
+            - ppmmu6
+            - pp7
+            - ppmmu7
+            - pmu       # Power Management Unit interrupt (optional)
+            - combined  # stericsson,db8500-mali only
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: bus
+      - const: core
+
+  memory-region: true
+
+  mali-supply: true
+
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  "#cooling-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-mali
+              - allwinner,sun7i-a20-mali
+              - allwinner,sun8i-r40-mali
+              - allwinner,sun50i-a64-mali
+              - allwinner,sun50i-h5-mali
+              - amlogic,meson8-mali
+              - amlogic,meson8b-mali
+              - hisilicon,hi6220-mali
+              - mediatek,mt7623-mali
+              - rockchip,rk3036-mali
+              - rockchip,rk3066-mali
+              - rockchip,rk3188-mali
+              - rockchip,rk3228-mali
+              - rockchip,rk3328-mali
+    then:
+      required:
+        - resets
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mali: gpu@1c40000 {
+      compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+      reg = <0x01c40000 0x10000>;
+      interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "gp",
+            "gpmmu",
+            "pp0",
+            "ppmmu0",
+            "pp1",
+            "ppmmu1",
+            "pmu";
+      clocks = <&ccu 1>, <&ccu 2>;
+      clock-names = "bus", "core";
+      resets = <&ccu 1>;
+      #cooling-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
new file mode 100644
index 0000000000..958bdf9623
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
@@ -0,0 +1,41 @@
+Device tree configuration for the GFX display device on the ASPEED SoCs
+
+Required properties:
+  - compatible
+    * Must be one of the following:
+      + aspeed,ast2500-gfx
+      + aspeed,ast2400-gfx
+    * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
+      be present
+
+  - reg: Physical base address and length of the GFX registers
+
+  - interrupts: interrupt number for the GFX device
+
+  - clocks: clock number used to generate the pixel clock
+
+  - resets: reset line that must be released to use the GFX device
+
+  - memory-region:
+    Phandle to a memory region to allocate from, as defined in
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+
+Example:
+
+gfx: display@1e6e6000 {
+	compatible = "aspeed,ast2500-gfx", "syscon";
+	reg = <0x1e6e6000 0x1000>;
+	reg-io-width = <4>;
+	clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+	resets = <&syscon ASPEED_RESET_CRT1>;
+	interrupts = <0x19>;
+	memory-region = <&gfx_memory>;
+};
+
+gfx_memory: framebuffer {
+	size = <0x01000000>;
+	alignment = <0x01000000>;
+	compatible = "shared-dma-pool";
+	reusable;
+};
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
new file mode 100644
index 0000000000..dae55b8a26
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom V3D GPU
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    enum:
+      - brcm,2711-v3d
+      - brcm,7268-v3d
+      - brcm,7278-v3d
+
+  reg:
+    items:
+      - description: hub register (required)
+      - description: core0 register (required)
+      - description: GCA cache controller register (if GCA controller present)
+      - description: bridge register (if no external reset controller)
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: hub
+      - const: core0
+      - enum: [ bridge, gca ]
+      - enum: [ bridge, gca ]
+    minItems: 2
+
+  interrupts:
+    items:
+      - description: hub interrupt (required)
+      - description: core interrupts (if it doesn't share the hub's interrupt)
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gpu@f1200000 {
+      compatible = "brcm,7268-v3d";
+      reg = <0xf1200000 0x4000>,
+            <0xf1208000 0x4000>,
+            <0xf1204000 0x100>,
+            <0xf1204100 0x100>;
+      reg-names = "hub", "core0", "bridge", "gca";
+      interrupts = <0 78 4>,
+                   <0 77 4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
new file mode 100644
index 0000000000..ba4c6473ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvdec
+      - nvidia,tegra186-nvdec
+      - nvidia,tegra194-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvdec
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA read 2 memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: read-1
+      - const: write
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0xf0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra186-nvdec";
+            reg = <0x15480000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVDEC>;
+            clock-names = "nvdec";
+            resets = <&bpmp TEGRA186_RESET_NVDEC>;
+            reset-names = "nvdec";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "read-1", "write";
+            iommus = <&smmu TEGRA186_SID_NVDEC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
new file mode 100644
index 0000000000..c23dae713e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVENC
+
+description: |
+  NVENC is the hardware video encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvenc@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvenc
+      - nvidia,tegra186-nvenc
+      - nvidia,tegra194-nvenc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvenc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0x21
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra210-nvenc
+            - nvidia,tegra186-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra194-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA read 2 memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-1
+            - const: write
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvenc@154c0000 {
+            compatible = "nvidia,tegra186-nvenc";
+            reg = <0x154c0000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVENC>;
+            clock-names = "nvenc";
+            resets = <&bpmp TEGRA186_RESET_NVENC>;
+            reset-names = "nvenc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVENC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
new file mode 100644
index 0000000000..99a33a5eac
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVJPG
+
+description: |
+  NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically programmed
+  through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvjpg@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvjpg
+      - nvidia,tegra186-nvjpg
+      - nvidia,tegra194-nvjpg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvjpg
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvjpg
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvjpg@15380000 {
+            compatible = "nvidia,tegra186-nvjpg";
+            reg = <0x15380000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+            clock-names = "nvjpg";
+            resets = <&bpmp TEGRA186_RESET_NVJPG>;
+            reset-names = "nvjpg";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVJPG>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
new file mode 100644
index 0000000000..0b7561c8b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: nvdec
+      - const: fuse
+      - const: tsec_pka
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the memory controller for determining information for the NVDEC
+      firmware secure carveout. This carveout is configured by the bootloader and
+      not accessible to CPU.
+
+  nvidia,bl-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader data section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system data section from beginning of firmware that was configured
+      by the bootloader.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,memory-controller
+  - nvidia,bl-manifest-offset
+  - nvidia,bl-code-offset
+  - nvidia,bl-data-offset
+  - nvidia,os-manifest-offset
+  - nvidia,os-code-offset
+  - nvidia,os-data-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra234-nvdec";
+            reg = <0x15480000 0x00040000>;
+            clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+                     <&bpmp TEGRA234_CLK_FUSE>,
+                     <&bpmp TEGRA234_CLK_TSEC_PKA>;
+            clock-names = "nvdec", "fuse", "tsec_pka";
+            resets = <&bpmp TEGRA234_RESET_NVDEC>;
+            reset-names = "nvdec";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+            dma-coherent;
+
+            nvidia,memory-controller = <&mc>;
+
+            /* Placeholder values, to be replaced with values from overlay */
+            nvidia,bl-manifest-offset = <0>;
+            nvidia,bl-data-offset = <0>;
+            nvidia,bl-code-offset = <0>;
+            nvidia,os-manifest-offset = <0>;
+            nvidia,os-data-offset = <0>;
+            nvidia,os-code-offset = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 0000000000..cc6ce5221a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,115 @@
+NVIDIA Tegra Graphics Processing Units
+
+Required properties:
+- compatible: "nvidia,<gpu>"
+  Currently recognized values:
+  - nvidia,gk20a
+  - nvidia,gm20b
+  - nvidia,gp10b
+  - nvidia,gv11b
+- reg: Physical base address and length of the controller's registers.
+  Must contain two entries:
+  - first entry for bar0
+  - second entry for bar1
+- interrupts: Must contain an entry for each entry in interrupt-names.
+  See ../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Must include the following entries:
+  - stall
+  - nonstall
+- vdd-supply: regulator for supply voltage. Only required for GPUs not using
+  power domains.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - gpu
+  - pwr
+If the compatible string is "nvidia,gm20b", then the following clock
+is also required:
+  - ref
+If the compatible string is "nvidia,gv11b", then the following clock is also
+required:
+  - fuse
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - gpu
+- power-domains: GPUs that make use of power domains can define this property
+  instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
+
+Optional properties:
+- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
+
+Example for GK20A:
+
+	gpu@57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		vdd-supply = <&vdd_gpu>;
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+	};
+
+Example for GM20B:
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+	};
+
+Example for GP10B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gp10b";
+		reg = <0x0 0x17000000 0x0 0x1000000>,
+		      <0x0 0x18000000 0x0 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+			 <&bpmp TEGRA186_CLK_GPU>;
+		clock-names = "gpu", "pwr";
+		resets = <&bpmp TEGRA186_RESET_GPU>;
+		reset-names = "gpu";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA186_SID_GPU>;
+	};
+
+Example for GV11B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gv11b";
+		reg = <0x17000000 0x1000000>,
+		      <0x18000000 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+			 <&bpmp TEGRA194_CLK_GPU_PWR>,
+			 <&bpmp TEGRA194_CLK_FUSE>;
+		clock-names = "gpu", "pwr", "fuse";
+		resets = <&bpmp TEGRA194_RESET_GPU>;
+		reset-names = "gpu";
+		dma-coherent;
+
+		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA194_SID_GPU>;
+	};
diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
new file mode 100644
index 0000000000..e7daae8625
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-g2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC 2D Graphics Accelerator
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-g2d    # in S5PV210 & Exynos4210 SoC
+      - samsung,exynos4212-g2d # in Exynos4x12 SoCs
+      - samsung,exynos5250-g2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: {}
+  clock-names: {}
+  iommus: {}
+  power-domains: {}
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos5250-g2d
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: fimg2d clock
+    clock-names:
+      items:
+        - const: fimg2d
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: sclk_fimg2d clock
+        - description: fimg2d clock
+    clock-names:
+      items:
+        - const: sclk_fimg2d
+        - const: fimg2d
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    g2d@12800000 {
+        compatible = "samsung,s5pv210-g2d";
+        reg = <0x12800000 0x1000>;
+        interrupts = <0 89 0>;
+        clocks = <&clock 177>, <&clock 277>;
+        clock-names = "sclk_fimg2d", "fimg2d";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
new file mode 100644
index 0000000000..d60626ffb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-rotator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC Image Rotator
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - "samsung,s5pv210-rotator"
+      - "samsung,exynos4210-rotator"
+      - "samsung,exynos4212-rotator"
+      - "samsung,exynos5250-rotator"
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rotator
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rotator@12810000 {
+        compatible = "samsung,exynos4210-rotator";
+        reg = <0x12810000 0x1000>;
+        interrupts = <0 83 0>;
+        clocks = <&clock 278>;
+        clock-names = "rotator";
+    };
diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
new file mode 100644
index 0000000000..5317ac6442
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/samsung-scaler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Image Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5420-scaler
+      - samsung,exynos5433-scaler
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: {}
+  clock-names: {}
+  iommus: {}
+  power-domains: {}
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: samsung,exynos5420-scaler
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: mscl clock
+
+    clock-names:
+      items:
+        - const: mscl
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: pclk clock
+        - description: aclk clock
+        - description: aclk_xiu clock
+
+    clock-names:
+      items:
+        - const: pclk
+        - const: aclk
+        - const: aclk_xiu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scaler@12800000 {
+        compatible = "samsung,exynos5420-scaler";
+        reg = <0x12800000 0x1294>;
+        interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MSCL0>;
+        clock-names = "mscl";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
new file mode 100644
index 0000000000..b1b10ea70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vivante GPU
+
+description: Vivante GPU core devices
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    const: vivante,gc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#cooling-cells':
+    const: 2
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: AXI/master interface clock
+      - description: GPU core clock
+      - description: Shader clock (only required if GPU has feature PIPE_3D)
+      - description: AHB/slave interface clock (only required if GPU can gate
+          slave interface independently)
+    minItems: 1
+
+  clock-names:
+    items:
+      enum: [ bus, core, shader, reg ]
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpu@130000 {
+      compatible = "vivante,gc";
+      reg = <0x00130000 0x4000>;
+      interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+               <&clks IMX6QDL_CLK_GPU3D_CORE>,
+               <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+      clock-names = "bus", "core", "shader";
+      power-domains = <&gpc 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/graph.txt b/Documentation/devicetree/bindings/graph.txt
new file mode 100644
index 0000000000..14733b5cb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/graph.txt
@@ -0,0 +1 @@
+This file has moved to graph.yaml in dt-schema repo
diff --git a/Documentation/devicetree/bindings/hsi/client-devices.txt b/Documentation/devicetree/bindings/hsi/client-devices.txt
new file mode 100644
index 0000000000..104c9a3e57
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/client-devices.txt
@@ -0,0 +1,44 @@
+Each HSI port is supposed to have one child node, which
+symbols the remote device connected to the HSI port. The
+following properties are standardized for HSI clients:
+
+Required HSI configuration properties:
+
+- hsi-channel-ids:	A list of channel ids
+
+- hsi-rx-mode:		Receiver Bit transmission mode ("stream" or "frame")
+- hsi-tx-mode:		Transmitter Bit transmission mode ("stream" or "frame")
+- hsi-mode:		May be used instead hsi-rx-mode and hsi-tx-mode if
+			the transmission mode is the same for receiver and
+			transmitter
+- hsi-speed-kbps:	Max bit transmission speed in kbit/s
+- hsi-flow:		RX flow type ("synchronized" or "pipeline")
+- hsi-arb-mode:		Arbitration mode for TX frame ("round-robin", "priority")
+
+Optional HSI configuration properties:
+
+- hsi-channel-names:	A list with one name per channel specified in the
+			hsi-channel-ids property
+
+
+Device Tree node example for an HSI client:
+
+hsi-controller {
+	hsi-port {
+		modem: hsi-client {
+			compatible = "nokia,n900-modem";
+
+			hsi-channel-ids = <0>, <1>, <2>, <3>;
+			hsi-channel-names = "mcsaab-control",
+					    "speech-control",
+					    "speech-data",
+					    "mcsaab-data";
+			hsi-speed-kbps = <55000>;
+			hsi-mode = "frame";
+			hsi-flow = "synchronized";
+			hsi-arb-mode = "round-robin";
+
+			/* more client specific properties */
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/hsi/nokia-modem.txt b/Documentation/devicetree/bindings/hsi/nokia-modem.txt
new file mode 100644
index 0000000000..53de1d9d0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/nokia-modem.txt
@@ -0,0 +1,59 @@
+Nokia modem client bindings
+
+The Nokia modem HSI client follows the common HSI client binding
+and inherits all required properties. The following additional
+properties are needed by the Nokia modem HSI client:
+
+Required properties:
+- compatible:		Should be one of
+      "nokia,n900-modem"
+      "nokia,n950-modem"
+      "nokia,n9-modem"
+- hsi-channel-names:	Should contain the following strings
+      "mcsaab-control"
+      "speech-control"
+      "speech-data"
+      "mcsaab-data"
+- gpios:		Should provide a GPIO handler for each GPIO listed in
+                        gpio-names
+- gpio-names:		Should contain the following strings
+      "cmt_apeslpx" (for n900, n950, n9)
+      "cmt_rst_rq"  (for n900, n950, n9)
+      "cmt_en"      (for n900, n950, n9)
+      "cmt_rst"     (for n900)
+      "cmt_bsi"     (for n900)
+- interrupts:		Should be IRQ handle for modem's reset indication
+
+Example:
+
+&ssi_port {
+	modem: hsi-client {
+		compatible = "nokia,n900-modem";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <55000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
+			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
+			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en",
+			     "cmt_rst",
+			     "cmt_bsi";
+	};
+};
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
new file mode 100644
index 0000000000..77a0c3c303
--- /dev/null
+++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt
@@ -0,0 +1,102 @@
+OMAP SSI controller bindings
+
+OMAP3's Synchronous Serial Interface (SSI) controller implements a
+legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI),
+while the controller found inside OMAP4 is supposed to be fully compliant
+with the HSI standard.
+
+Required properties:
+- compatible:		Should include "ti,omap3-ssi" or "ti,omap4-hsi"
+- reg-names:		Contains the values "sys" and "gdd" (in this order).
+- reg:			Contains a matching register specifier for each entry
+			in reg-names.
+- interrupt-names:	Contains the value "gdd_mpu".
+- interrupts: 		Contains matching interrupt information for each entry
+			in interrupt-names.
+- ranges:		Represents the bus address mapping between the main
+			controller node and the child nodes below.
+- clock-names:		Must include the following entries:
+  "ssi_ssr_fck": The OMAP clock of that name
+  "ssi_sst_fck": The OMAP clock of that name
+  "ssi_ick": The OMAP clock of that name
+- clocks:		Contains a matching clock specifier for each entry in
+			clock-names.
+- #address-cells:	Should be set to <1>
+- #size-cells:		Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible:		Should be set to the following value
+			ti,omap3-ssi-port (applicable to OMAP34xx devices)
+			ti,omap4-hsi-port (applicable to OMAP44xx devices)
+- reg-names:		Contains the values "tx" and "rx" (in this order).
+- reg:			Contains a matching register specifier for each entry
+			in reg-names.
+- interrupts:		Should contain interrupt specifiers for mpu interrupts
+			0 and 1 (in this order).
+- ti,ssi-cawake-gpio:	Defines which GPIO pin is used to signify CAWAKE
+			events for the port. This is an optional board-specific
+			property. If it's missing the port will not be
+			enabled.
+
+Optional properties:
+- ti,hwmods:		Shall contain TI interconnect module name if needed
+			by the SoC
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+	compatible = "ti,omap3-ssi";
+
+	/* needed until hwmod is updated to use the compatible string */
+	ti,hwmods = "ssi";
+
+	reg = <0x48058000 0x1000>,
+	      <0x48059000 0x1000>;
+	reg-names = "sys",
+		    "gdd";
+
+	interrupts = <55>;
+	interrupt-names = "gdd_mpu";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	ssi-port@4805a000 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805a000 0x800>,
+		      <0x4805a800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <67>,
+			     <68>;
+
+		ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+	}
+
+	ssi-port@4805a000 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805b000 0x800>,
+		      <0x4805b800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <69>,
+			     <70>;
+
+	}
+}
diff --git a/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
new file mode 100644
index 0000000000..9d0c36ec19
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/loongson,ls2k-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC ChipID
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC contains many groups of global utilities register
+  blocks, of which the ChipID group registers record SoC version,
+  feature, vendor and id information.
+
+properties:
+  compatible:
+    const: loongson,ls2k-chipid
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid: chipid@1fe00000 {
+        compatible = "loongson,ls2k-chipid";
+        reg = <0x1fe00000 0x3ffc>;
+        little-endian;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
new file mode 100644
index 0000000000..792f371cec
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Product Register
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  Most Renesas ARM SoCs have a Product Register or Boundary Scan ID
+  Register that allows to retrieve SoC product and revision information.
+  If present, a device node for this register should be added.
+
+properties:
+  compatible:
+    enum:
+      - renesas,prr
+      - renesas,bsid
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    prr: chipid@ff000044 {
+        compatible = "renesas,prr";
+        reg = <0xff000044 4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
new file mode 100644
index 0000000000..95cbdcb56e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,exynos-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Chipid driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-chipid
+      - samsung,exynos850-chipid
+
+  reg:
+    maxItems: 1
+
+  samsung,asv-bin:
+    description:
+      Adaptive Supply Voltage bin selection. This can be used
+      to determine the ASV bin of an SoC if respective information
+      is missing in the CHIPID registers or in the OTP memory.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@10000000 {
+        compatible = "samsung,exynos4210-chipid";
+        reg = <0x10000000 0x100>;
+        samsung,asv-bin = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
new file mode 100644
index 0000000000..563ded4fca
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,s5pv210-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 SoC ChipID
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,s5pv210-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@e0000000 {
+        compatible = "samsung,s5pv210-chipid";
+        reg = <0xe0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
new file mode 100644
index 0000000000..dada28b47e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/ti,k3-socinfo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC platforms chipid module
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
+  represented by CTRLMMR_xxx_JTAGID register which contains information about
+  SoC id and revision.
+
+properties:
+  $nodename:
+    pattern: "^chipid@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: ti,am654-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@43000014 {
+        compatible = "ti,am654-chipid";
+        reg = <0x43000014 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
new file mode 100644
index 0000000000..584cce3211
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SUN6I hardware spinlock driver for Allwinner sun6i compatible SoCs
+
+maintainers:
+  - Wilken Gottwalt <wilken.gottwalt@posteo.net>
+
+description:
+  The hardware unit provides semaphores between the ARM cores and the embedded
+  companion core on the SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun6i-a31-hwspinlock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#hwlock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#hwlock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    hwlock@1c18000 {
+        compatible = "allwinner,sun6i-a31-hwspinlock";
+        reg = <0x01c18000 0x1000>;
+        clocks = <&ccu CLK_BUS_SPINLOCK>;
+        resets = <&ccu RST_BUS_SPINLOCK>;
+        #hwlock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwlock/hwlock.txt b/Documentation/devicetree/bindings/hwlock/hwlock.txt
new file mode 100644
index 0000000000..085d1f5c91
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/hwlock.txt
@@ -0,0 +1,59 @@
+Generic hwlock bindings
+=======================
+
+Generic bindings that are common to all the hwlock platform specific driver
+implementations.
+
+Please also look through the individual platform specific hwlock binding
+documentations for identifying any additional properties specific to that
+platform.
+
+hwlock providers:
+=================
+
+Required properties:
+- #hwlock-cells:        Specifies the number of cells needed to represent a
+                        specific lock.
+
+hwlock users:
+=============
+
+Consumers that require specific hwlock(s) should specify them using the
+property "hwlocks", and an optional "hwlock-names" property.
+
+Required properties:
+- hwlocks:              List of phandle to a hwlock provider node and an
+                        associated hwlock args specifier as indicated by
+                        #hwlock-cells. The list can have just a single hwlock
+                        or multiple hwlocks, with each hwlock represented by
+                        a phandle and a corresponding args specifier.
+
+Optional properties:
+- hwlock-names:         List of hwlock name strings defined in the same order
+                        as the hwlocks, with one name per hwlock. Consumers can
+                        use the hwlock-names to match and get a specific hwlock.
+
+
+1. Example of a node using a single specific hwlock:
+
+The following example has a node requesting a hwlock in the bank defined by
+the node hwlock1. hwlock1 is a hwlock provider with an argument specifier
+of length 1.
+
+	node {
+		...
+		hwlocks = <&hwlock1 2>;
+		...
+	};
+
+2. Example of a node using multiple specific hwlocks:
+
+The following example has a node requesting two hwlocks, a hwlock within
+the hwlock device node 'hwlock1' with #hwlock-cells value of 1, and another
+hwlock within the hwlock device node 'hwlock2' with #hwlock-cells value of 2.
+
+	node {
+		...
+		hwlocks = <&hwlock1 2>, <&hwlock2 0 3>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
new file mode 100644
index 0000000000..ee2726149c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/qcom-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Hardware Mutex Block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The hardware block provides mutexes utilized between different processors on
+  the SoC as part of the communication protocol used by these processors.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#hwlock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#hwlock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hwlock@1f40000 {
+        compatible = "qcom,tcsr-mutex";
+        reg = <0x01f40000 0x40000>;
+        #hwlock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
new file mode 100644
index 0000000000..581db9d941
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
@@ -0,0 +1,23 @@
+SPRD Hardware Spinlock Device Binding
+-------------------------------------
+
+Required properties :
+- compatible : should be "sprd,hwspinlock-r3p0".
+- reg : the register address of hwspinlock.
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+	hwlock, so the number of cells should be <1> here.
+- clock-names : Must contain "enable".
+- clocks : Must contain a phandle entry for the clock in clock-names, see the
+	common clock bindings.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+	hwspinlock@40500000 {
+		compatible  = "sprd,hwspinlock-r3p0";
+		reg = <0 0x40500000 0 0x1000>;
+		#hwlock-cells = <1>;
+		clock-names = "enable";
+		clocks = <&clk_aon_apb_gates0 22>;
+	};
diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
new file mode 100644
index 0000000000..829d1fdf4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/st,stm32-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Hardware Spinlock
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+
+properties:
+  "#hwlock-cells":
+    const: 1
+
+  compatible:
+    const: st,stm32-hwspinlock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hsem
+
+required:
+  - "#hwlock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    hwspinlock@4c000000 {
+        compatible = "st,stm32-hwspinlock";
+        #hwlock-cells = <1>;
+        reg = <0x4c000000 0x400>;
+        clocks = <&rcc HSEM>;
+        clock-names = "hsem";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
new file mode 100644
index 0000000000..5ba60d532f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HwSpinlock for OMAP and K3 based SoCs
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap4-hwspinlock  # for OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs
+      - ti,am64-hwspinlock   # for K3 AM64x SoCs
+      - ti,am654-hwspinlock  # for K3 AM65x, J721E and J7200 SoCs
+
+  reg:
+    maxItems: 1
+
+  "#hwlock-cells":
+    const: 1
+    description: |
+      The OMAP hwspinlock users will use a 0-indexed relative hwlock number as
+      the argument specifier value for requesting a specific hwspinlock within
+      a hwspinlock bank.
+
+      Please look at the generic hwlock binding for usage information for
+      consumers, "Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+required:
+  - compatible
+  - reg
+  - "#hwlock-cells"
+
+additionalProperties: false
+
+examples:
+
+  - |
+    spinlock@4a0f6000 {
+        compatible = "ti,omap4-hwspinlock";
+        reg = <0x4a0f6000 0x1000>;
+        #hwlock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
new file mode 100644
index 0000000000..d0ae46d7ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
@@ -0,0 +1,38 @@
+TI ADC128D818 ADC System Monitor With Temperature Sensor
+--------------------------------------------------------
+
+Operation modes:
+
+ - Mode 0:  7 single-ended voltage readings (IN0-IN6),
+            1 temperature reading (internal)
+ - Mode 1:  8 single-ended voltage readings (IN0-IN7),
+            no temperature
+ - Mode 2:  4 pseudo-differential voltage readings
+              (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
+            1 temperature reading (internal)
+ - Mode 3:  4 single-ended voltage readings (IN0-IN3),
+            2 pseudo-differential voltage readings
+              (IN4-IN5, IN7-IN6),
+            1 temperature reading (internal)
+
+If no operation mode is configured via device tree, the driver keeps the
+currently active chip operation mode (default is mode 0).
+
+
+Required node properties:
+
+ - compatible:  must be set to "ti,adc128d818"
+ - reg:         I2C address of the device
+
+Optional node properties:
+
+ - ti,mode:     Operation mode (u8) (see above).
+
+
+Example (operation mode 2):
+
+	adc128d818@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <2>;
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
new file mode 100644
index 0000000000..ce7f8ce9da
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7416/AD7417/AD7418 temperature sensors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7416
+      - adi,ad7417
+      - adi,ad7418
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@28 {
+            compatible = "adi,ad7418";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
new file mode 100644
index 0000000000..2e45364d05
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1177
+
+  reg:
+    maxItems: 1
+
+  avcc-supply:
+    description:
+      Phandle to the Avcc power supply
+
+  shunt-resistor-micro-ohms:
+    description:
+      The value of current sense resistor in microohms. If not provided,
+      the current reading and overcurrent alert is disabled.
+
+  adi,shutdown-threshold-microamp:
+    description:
+      Specifies the current level at which an over current alert occurs.
+      If not provided, the overcurrent alert is configured to max ADC range
+      based on shunt-resistor-micro-ohms.
+
+  adi,vrange-high-enable:
+    description:
+      Specifies which internal voltage divider to be used. A 1 selects
+      a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pwmon@5a {
+            compatible = "adi,adm1177";
+            reg = <0x5a>;
+            shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
+            adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
+            adi,vrange-high-enable;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
new file mode 100644
index 0000000000..4f8e11bd51
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1266.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Analog Devices ADM1266 Cascadable Super Sequencer with Margin
+  Control and Fault Recording.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1266
+
+  reg:
+    description: |
+      I2C address of slave device.
+    items:
+      minimum: 0x40
+      maximum: 0x4F
+
+  avcc-supply:
+    description: |
+      Phandle to the Avcc power supply.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adm1266@40 {
+            compatible = "adi,adm1266";
+            reg = <0x40>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
new file mode 100644
index 0000000000..ab87f51c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
+  that offer digital current, voltage, and power monitoring using an on-chip,
+  12-bit analog-to-digital converter (ADC), communicated through a PMBus
+  compliant I2C interface.
+
+  Datasheets:
+    https://www.analog.com/en/products/adm1294.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1075
+      - adi,adm1272
+      - adi,adm1275
+      - adi,adm1276
+      - adi,adm1278
+      - adi,adm1293
+      - adi,adm1294
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohm.
+
+  adi,volt-curr-sample-average:
+    description: |
+      Number of samples to be used to report voltage and current values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+  adi,power-sample-average:
+    description: |
+      Number of samples to be used to report power values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1075
+              - adi,adm1276
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1275
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 16
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1272
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 128
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1278
+              - adi,adm1293
+              - adi,adm1294
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@10 {
+            compatible = "adi,adm1272";
+            reg = <0x10>;
+            shunt-resistor-micro-ohms = <500>;
+            adi,volt-curr-sample-average = <128>;
+            adi,power-sample-average = <128>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
new file mode 100644
index 0000000000..6751f9b643
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI FAN Control
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |+
+  Bindings for the Analog Devices AXI FAN Control driver. Specifications of the
+  core can be found in:
+
+  https://wiki.analog.com/resources/fpga/docs/axi_fan_control
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-fan-control-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Value specifying the number of pulses per revolution of the controlled
+      FAN.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - pulses-per-revolution
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga_axi: fpga-axi {
+        #address-cells = <0x2>;
+        #size-cells = <0x1>;
+
+        axi_fan_control: axi-fan-control@80000000 {
+            compatible = "adi,axi-fan-control-1.00.a";
+            reg = <0x0 0x80000000 0x10000>;
+            clocks = <&clk 71>;
+            interrupts = <0 110 0>;
+            pulses-per-revolution = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
new file mode 100644
index 0000000000..5cb66e97e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2945 wide range i2c power monitor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  Analog Devices LTC2945 wide range i2c power monitor over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2945
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@6e {
+            compatible = "adi,ltc2945";
+            reg = <0x6e>;
+            /* 10 milli-Ohm shunt resistor */
+            shunt-resistor-micro-ohms = <10000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
new file mode 100644
index 0000000000..152935334c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2947.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2947 high precision power and energy monitor
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2947 high precision power and energy monitor over SPI or I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2947.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2947
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      The LTC2947 uses either a trimmed internal oscillator or an external clock
+      as the time base for determining the integration period to represent time,
+      charge and energy. When an external clock is used, this property must be
+      set accordingly.
+    maxItems: 1
+
+  adi,accumulator-ctl-pol:
+    description:
+      This property controls the polarity of current that is accumulated to
+      calculate charge and energy so that, they can be only accumulated for
+      positive current for example. Since there are two sets of registers for
+      the accumulated values, this entry can also have two items which sets
+      energy1/charge1 and energy2/charger2 respectively. Check table 12 of the
+      datasheet for more information on the supported options.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2, 3]
+      default: 0
+
+  adi,accumulation-deadband-microamp:
+    description:
+      This property controls the Accumulation Dead band which allows to set the
+      level of current below which no accumulation takes place.
+    maximum: 255
+    default: 0
+
+  adi,gpio-out-pol:
+    description:
+      This property controls the GPIO polarity. Setting it to one makes the GPIO
+      active high, setting it to zero makets it active low. When this property
+      is present, the GPIO is automatically configured as output and set to
+      control a fan as a function of measured temperature.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    default: 0
+
+  adi,gpio-in-accum:
+    description:
+      When set, this property sets the GPIO as input. It is then used to control
+      the accumulation of charge, energy and time. This function can be
+      enabled/configured separately for each of the two sets of accumulation
+      registers. Check table 13 of the datasheet for more information on the
+      supported options. This property cannot be used together with
+      adi,gpio-out-pol.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      enum: [0, 1, 2]
+      default: 0
+
+required:
+  - compatible
+  - reg
+
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ltc2947_spi: ltc2947@0 {
+            compatible = "adi,ltc2947";
+            reg = <0>;
+            /* accumulation takes place always for energ1/charge1. */
+            /* accumulation only on positive current for energy2/charge2. */
+            adi,accumulator-ctl-pol = <0 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
new file mode 100644
index 0000000000..0ad12d2456
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2992.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology 2992 Power Monitor
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Linear Technology 2992 Dual Wide Range Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2992
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avcc-supply: true
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    additionalProperties: false
+    description: |
+      Represents the two supplies to be monitored.
+
+    properties:
+      reg:
+        description: |
+          The channel number. LTC2992 can monitor two supplies.
+        items:
+          minimum: 0
+          maximum: 1
+
+      shunt-resistor-micro-ohms:
+        description:
+          The value of current sense resistor in microohms.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ltc2992@6f {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ltc2992";
+            reg = <0x6f>;
+
+            channel@0 {
+                reg = <0x0>;
+                shunt-resistor-micro-ohms = <10000>;
+            };
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <10000>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
new file mode 100644
index 0000000000..9f2d08d7b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31760 Fan-Speed Controller
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Analog Devices MAX31760 Fan-Speed Controller
+  https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max31760
+
+  reg:
+    description: I2C address of slave device.
+    minimum: 0x50
+    maximum: 0x57
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@50 {
+            reg = <0x50>;
+            compatible = "adi,max31760";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
new file mode 100644
index 0000000000..2dc8b07b4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch
+
+maintainers:
+  - Daniel Matyas <daniel.matyas@analog.com>
+
+description: |
+  Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with
+  I2C Interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,max31827
+      - items:
+          - enum:
+              - adi,max31828
+              - adi,max31829
+          - const: adi,max31827
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Must have values in the interval (1.6V; 3.6V) in order for the device to
+      function correctly.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@42 {
+            compatible = "adi,max31827";
+            reg = <0x42>;
+            vref-supply = <&reg_vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
new file mode 100644
index 0000000000..051c976ab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADT7475 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+
+description: |
+  The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
+  PWN fan controllers.
+
+  They support monitoring and controlling up to four fans (the ADT7490 can only
+  control up to three). They support reading a single on chip temperature
+  sensor and two off chip temperature sensors (the ADT7490 additionally
+  supports measuring up to three current external temperature sensors with
+  series resistance cancellation (SRC)).
+
+  Datasheets:
+  https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
+  https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
+
+  Description taken from onsemiconductors specification sheets, with minor
+  rephrasing.
+
+properties:
+  compatible:
+    enum:
+      - adi,adt7473
+      - adi,adt7475
+      - adi,adt7476
+      - adi,adt7490
+
+  reg:
+    maxItems: 1
+
+  adi,pwm-active-state:
+    description: |
+      Integer array, represents the active state of the pwm outputs If set to 0
+      the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
+      uses a logic high output for 100% duty cycle.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    items:
+      enum: [0, 1]
+      default: 1
+
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains its configuration from the bios/bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  "^adi,pin(5|10)-function$":
+    description: |
+      Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
+      pin 10 on the adi,adt7476 and adi,adt7490.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - pwm2
+      - smbalert#
+
+  "^adi,pin(9|14)-function$":
+    description: |
+      Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
+      pin 14 on the adi,adt7476 and adi,adt7490
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - tach4
+      - therm#
+      - smbalert#
+      - gpio
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hwmon@2e {
+        compatible = "adi,adt7476";
+        reg = <0x2e>;
+        adi,bypass-attenuator-in0 = <1>;
+        adi,bypass-attenuator-in1 = <0>;
+        adi,pwm-active-state = <1 0 1>;
+        adi,pin10-function = "smbalert#";
+        adi,pin14-function = "tach4";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
new file mode 100644
index 0000000000..353d81d89b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amd,sbrmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: >
+  Sideband Remote Management Interface (SB-RMI) compliant
+  AMD SoC power device.
+
+maintainers:
+  - Akshay Gupta <Akshay.Gupta@amd.com>
+
+description: |
+  SB Remote Management Interface (SB-RMI) is an SMBus compatible
+  interface that reports AMD SoC's Power (normalized Power) using,
+  Mailbox Service Request and resembles a typical 8-pin remote power
+  sensor's I2C interface to BMC. The power attributes in hwmon
+  reports power in microwatts.
+
+properties:
+  compatible:
+    enum:
+      - amd,sbrmi
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C bus address of the device as specified in Section SBI SMBus Address
+      of the SoC register reference. The SB-RMI address is normally 78h for
+      socket 0 and 70h for socket 1, but it could vary based on hardware
+      address select pins.
+      \[open source SoC register reference\]
+        https://www.amd.com/en/support/tech-docs?keyword=55898
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sbrmi@3c {
+            compatible = "amd,sbrmi";
+            reg = <0x3c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
new file mode 100644
index 0000000000..75088244a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amd,sbtsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: >
+  Sideband interface Temperature Sensor Interface (SB-TSI) compliant
+  AMD SoC temperature device
+
+maintainers:
+  - Kun Yi <kunyi@google.com>
+  - Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+
+description: |
+  SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible
+  interface that reports AMD SoC's Ttcl (normalized temperature),
+  and resembles a typical 8-pin remote temperature sensor's I2C interface
+  to BMC. The emulated thermal sensor can report temperatures in increments
+  of 0.125 degrees, ranging from 0 to 255.875.
+
+properties:
+  compatible:
+    enum:
+      - amd,sbtsi
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C bus address of the device as specified in Section 6.3.1 of the
+      SoC register reference. The SB-TSI address is normally 98h for socket
+      0 and 90h for socket 1, but it could vary based on hardware address
+      select pins.
+      \[open source SoC register reference\]
+        https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sbtsi@4c {
+            compatible = "amd,sbtsi";
+            reg = <0x4c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
new file mode 100644
index 0000000000..59b38557f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
@@ -0,0 +1,14 @@
+APM X-Gene hwmon driver
+
+APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox.
+
+Required properties :
+ - compatible : should be "apm,xgene-slimpro-hwmon"
+ - mboxes : use the label reference for the mailbox as the first parameter.
+	    The second parameter is the channel number.
+
+Example :
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt
new file mode 100644
index 0000000000..d102fe7651
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/as370.txt
@@ -0,0 +1,11 @@
+Bindings for Synaptics AS370 PVT sensors
+
+Required properties:
+- compatible : "syna,as370-hwmon"
+- reg        : address and length of the register set.
+
+Example:
+	hwmon@ea0810 {
+		compatible = "syna,as370-hwmon";
+		reg = <0xea0810 0xc>;
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
new file mode 100644
index 0000000000..8645cd3b86
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -0,0 +1,73 @@
+ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 8 fans supported. Each fan can have one PWM output and
+one/two Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 1.
+
+- #cooling-cells: should be 2.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and
+	       "aspeed,ast2500-pwm-tacho" for AST2500.
+
+- clocks : phandle to clock provider with the clock number in the second cell
+
+- resets : phandle to reset controller with the reset number in the second cell
+
+fan subnode format:
+===================
+Under fan subnode there can upto 8 child nodes, with each child node
+representing a fan. If there are 8 fans each fan can have one PWM port and
+one/two Fan tach inputs.
+For PWM port can be configured cooling-levels to create cooling device.
+Cooling device could be bound to a thermal zone for the thermal control.
+
+Required properties for each child node:
+- reg : should specify PWM source port.
+	integer value in the range 0 to 7 with 0 indicating PWM port A and
+	7 indicating PWM port H.
+
+- cooling-levels: PWM duty cycle values in a range from 0 to 255
+                  which correspond to thermal cooling states.
+
+- aspeed,fan-tach-ch : should specify the Fan tach input channel.
+                integer value in the range 0 through 15, with 0 indicating
+		Fan tach channel 0 and 15 indicating Fan tach channel 15.
+		At least one Fan tach input channel is required.
+
+Examples:
+
+pwm_tacho: pwmtachocontroller@1e786000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#cooling-cells = <2>;
+	reg = <0x1E786000 0x1000>;
+	compatible = "aspeed,ast2500-pwm-tacho";
+	clocks = <&syscon ASPEED_CLK_APB>;
+	resets = <&syscon ASPEED_RESET_PWM>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		cooling-levels = /bits/ 8 <125 151 177 203 229 255>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
new file mode 100644
index 0000000000..5d3ce641fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/baikal,bt1-pvt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PVT Sensor
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Baikal-T1 SoC provides an embedded process, voltage and temperature
+  sensor to monitor an internal SoC environment (chip temperature, supply
+  voltage and process monitor) and on time detect critical situations,
+  which may cause the system instability and even damages. The IP-block
+  is based on the Analog Bits PVT sensor, but is equipped with a dedicated
+  control wrapper, which provides a MMIO registers-based access to the
+  sensor core functionality (APB3-bus based) and exposes an additional
+  functions like thresholds/data ready interrupts, its status and masks,
+  measurements timeout. Its internal structure is depicted on the next
+  diagram:
+
+     Analog Bits core                     Bakal-T1 PVT control block
+  +--------------------+                  +------------------------+
+  | Temperature sensor |-+         +------| Sensors control        |
+  |--------------------| |<---En---|      |------------------------|
+  | Voltage sensor     |-|<--Mode--| +--->| Sampled data           |
+  |--------------------| |<--Trim--+ |    |------------------------|
+  | Low-Vt sensor      |-|           | +--| Thresholds comparator  |
+  |--------------------| |---Data----| |  |------------------------|
+  | High-Vt sensor     |-|           | +->| Interrupts status      |
+  |--------------------| |--Valid--+-+ |  |------------------------|
+  | Standard-Vt sensor |-+         +---+--| Interrupts mask        |
+  +--------------------+                  |------------------------|
+           ^                              | Interrupts timeout     |
+           |                              +------------------------+
+           |                                        ^  ^
+  Rclk-----+----------------------------------------+  |
+  APB3-------------------------------------------------+
+
+  This bindings describes the external Baikal-T1 PVT control interfaces
+  like MMIO registers space, interrupt request number and clocks source.
+  These are then used by the corresponding hwmon device driver to
+  implement the sysfs files-based access to the sensors functionality.
+
+properties:
+  compatible:
+    const: baikal,bt1-pvt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PVT reference clock
+      - description: APB3 interface clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  "#thermal-sensor-cells":
+    description: Baikal-T1 can be referenced as the CPU thermal-sensor
+    const: 0
+
+  baikal,pvt-temp-offset-millicelsius:
+    description: |
+      Temperature sensor trimming factor. It can be used to manually adjust the
+      temperature measurements within 7.130 degrees Celsius.
+    default: 0
+    minimum: 0
+    maximum: 7130
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pvt@1f200000 {
+      compatible = "baikal,bt1-pvt";
+      reg = <0x1f200000 0x1000>;
+      #thermal-sensor-cells = <0>;
+
+      interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>;
+
+      baikal,pvt-temp-offset-millicelsius = <1000>;
+
+      clocks = <&ccu_sys>, <&ccu_sys>;
+      clock-names = "ref", "pclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..cc00b97a7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+  This binding must be part of the Lochnagar MFD binding:
+    [1] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar2-hwmon
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt
new file mode 100644
index 0000000000..6d154c4923
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/g762.txt
@@ -0,0 +1,47 @@
+GMT G762/G763 PWM Fan controller
+
+Required node properties:
+
+ - "compatible": must be either "gmt,g762" or "gmt,g763"
+ - "reg": I2C bus address of the device
+ - "clocks": a fixed clock providing input clock frequency
+	     on CLK pin of the chip.
+
+Optional properties:
+
+ - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3.
+	       The higher the more.
+
+ - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty)
+	       and 1 (negative duty).
+
+ - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2.
+
+If an optional property is not set in .dts file, then current value is kept
+unmodified (e.g. u-boot installed value).
+
+Additional information on operational parameters for the device is available
+in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
+at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
+
+Example g762 node:
+
+   clocks {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	g762_clk: fixedclk {
+		 compatible = "fixed-clock";
+		 #clock-cells = <0>;
+		 clock-frequency = <8192>;
+	}
+   }
+
+   g762: g762@3e {
+	compatible = "gmt,g762";
+	reg = <0x3e>;
+	clocks = <&g762_clk>
+	fan_gear_mode = <0>; /* chip default */
+	fan_startv = <1>;    /* chip default */
+	pwm_polarity = <0>;  /* chip default */
+   };
diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
new file mode 100644
index 0000000000..f4cfa350f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
@@ -0,0 +1,41 @@
+Bindings for fan connected to GPIO lines
+
+Required properties:
+- compatible : "gpio-fan"
+
+Optional properties:
+- gpios: Specifies the pins that map to bits in the control value,
+  ordered MSB-->LSB.
+- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
+  control value that should be set to achieve them. This array
+  must have the RPM values in ascending order.
+- alarm-gpios: This pin going active indicates something is wrong with
+  the fan, and a udev event will be fired.
+- #cooling-cells: If used as a cooling device, must be <2>
+  Also see:
+  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+  min and max states are derived from the speed-map of the fan.
+
+Note: At least one the "gpios" or "alarm-gpios" properties must be set.
+
+Examples:
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio1 14 1
+			 &gpio1 13 1>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+		alarm-gpios = <&gpio1 15 1>;
+	};
+	gpio_fan_cool: gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 14 1
+			 &gpio2 13 1>;
+		gpio-fan,speed-map =	<0    0>,
+					<3000 1>,
+					<6000 2>;
+		alarm-gpios = <&gpio2 15 1>;
+		#cooling-cells = <2>; /* min followed by max */
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml
new file mode 100644
index 0000000000..4a52aac6be
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hpe,gxp-fan-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Fan Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+description: |
+  The HPE GXP fan controller controls the fans through an external CPLD
+  device that connects to the fans.
+
+properties:
+  compatible:
+    const: hpe,gxp-fan-ctrl
+
+  reg:
+    items:
+      - description: Fan controller PWM
+      - description: Programmable logic
+      - description: Function 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: pl
+      - const: fn2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fan-controller@1000c00 {
+      compatible = "hpe,gxp-fan-ctrl";
+      reg = <0x1000c00 0x200>, <0xd1000000 0xff>, <0x80200000 0x100000>;
+      reg-names = "base", "pl", "fn2";
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 0000000000..3dbdc5af28
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system. A service processor or baseboard management
+  controller can query the OCC for it's power and thermal data to report
+  through hwmon.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,no-poll-on-init:
+    description: This property describes whether or not the OCC should
+      be polled during driver initialization.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "ibm,p10-occ-hwmon";
+        ibm,no-poll-on-init;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
new file mode 100644
index 0000000000..5dc5d2e257
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
@@ -0,0 +1,25 @@
+Device-tree bindings for I2C-based On-Chip Controller hwmon device
+------------------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,p8-occ-hwmon";
+ - reg = <I2C address>;			: I2C bus address
+
+Examples:
+
+    i2c-bus@100 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        < more properties >
+
+        occ-hwmon@1 {
+            compatible = "ibm,p8-occ-hwmon";
+            reg = <0x50>;
+        };
+
+        occ-hwmon@2 {
+            compatible = "ibm,p8-occ-hwmon";
+            reg = <0x51>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
new file mode 100644
index 0000000000..f93242be60
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
@@ -0,0 +1,23 @@
+IBM POWERNV platform sensors
+----------------------------
+
+Required node properties:
+- compatible: must be one of
+		"ibm,opal-sensor-cooling-fan"
+		"ibm,opal-sensor-amb-temp"
+		"ibm,opal-sensor-power-supply"
+		"ibm,opal-sensor-power"
+- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
+	     given sensor and its attribute data
+
+Example sensors node:
+
+cooling-fan#8-data {
+	sensor-id = <0x7052107>;
+	compatible = "ibm,opal-sensor-cooling-fan";
+};
+
+amb-temp#1-thrs {
+	sensor-id = <0x5096000>;
+	compatible = "ibm,opal-sensor-amb-temp";
+};
diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
new file mode 100644
index 0000000000..e5b24782f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC-attached Hardware Sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: >
+  Bindings for hardware monitoring devices connected to ADC controllers
+  supporting the Industrial I/O bindings.
+
+properties:
+  compatible:
+    const: iio-hwmon
+
+  io-channels:
+    minItems: 1
+    maxItems: 8 # Should be enough
+    description: >
+      List of phandles to ADC channels to read the monitoring values
+
+required:
+  - compatible
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    iio-hwmon {
+        compatible = "iio-hwmon";
+        io-channels = <&adc 1>, <&adc 2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 0000000000..fa63b61714
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,54 @@
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+  Required properties:
+  - compatible: Must be "ti,ina3221"
+  - reg: I2C address
+
+  Optional properties:
+  - ti,single-shot: This chip has two power modes: single-shot (chip takes one
+                    measurement and then shuts itself down) and continuous (
+                    chip takes continuous measurements). The continuous mode is
+                    more reliable and suitable for hardware monitor type device,
+                    but the single-shot mode is more power-friendly and useful
+                    for battery-powered device which cares power consumptions
+                    while still needs some measurements occasionally.
+                    If this property is present, the single-shot mode will be
+                    used, instead of the default continuous one for monitoring.
+
+  = The node contains optional child nodes for three channels =
+  = Each child node describes the information of input source =
+
+  - #address-cells: Required only if a child node is present. Must be 1.
+  - #size-cells: Required only if a child node is present. Must be 0.
+
+2) child nodes
+  Required properties:
+  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+  Optional properties:
+  - label: Name of the input source
+  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+Example:
+
+ina3221@40 {
+	compatible = "ti,ina3221";
+	reg = <0x40>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	input@0 {
+		reg = <0x0>;
+		status = "disabled";
+	};
+	input@1 {
+		reg = <0x1>;
+		shunt-resistor-micro-ohms = <5000>;
+	};
+	input@2 {
+		reg = <0x2>;
+		label = "VDD_5V";
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
new file mode 100644
index 0000000000..bf3332153a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jedec JC-42.4 compatible temperature sensors
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+select:
+  properties:
+    compatible:
+      const: jedec,jc-42.4-temp
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - const: jedec,jc-42.4-temp
+      - items:
+          - enum:
+              - adi,adt7408
+              - atmel,at30ts00
+              - atmel,at30tse004
+              - idt,tse2002
+              - idt,tse2004
+              - idt,ts3000
+              - idt,ts3001
+              - maxim,max6604
+              - microchip,mcp9804
+              - microchip,mcp9805
+              - microchip,mcp9808
+              - microchip,mcp98243
+              - microchip,mcp98244
+              - microchip,mcp9843
+              - nxp,se97
+              - nxp,se97b
+              - nxp,se98
+              - onnn,cat6095
+              - onnn,cat34ts02
+              - st,stts2002
+              - st,stts2004
+              - st,stts3000
+              - st,stts424
+              - st,stts424e
+          - const: jedec,jc-42.4-temp
+
+  reg:
+    maxItems: 1
+
+  smbus-timeout-disable:
+    description: |
+      When set, the smbus timeout function will be disabled. This is not
+      supported on all chips.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@1a {
+            compatible = "jedec,jc-42.4-temp";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
new file mode 100644
index 0000000000..010333cb25
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-fan
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
new file mode 100644
index 0000000000..e62aff6704
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4151 High Voltage I2C Current and Voltage Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: lltc,ltc4151
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6e {
+            compatible = "lltc,ltc4151";
+            reg = <0x6e>;
+            shunt-resistor-micro-ohms = <1500>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
new file mode 100644
index 0000000000..0b69897f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM75 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adt75
+      - atmel,at30ts74
+      - dallas,ds1775
+      - dallas,ds75
+      - dallas,ds7505
+      - gmt,g751
+      - national,lm75
+      - national,lm75a
+      - national,lm75b
+      - maxim,max6625
+      - maxim,max6626
+      - maxim,max31725
+      - maxim,max31726
+      - maxim,mcp980x
+      - nxp,pct2075
+      - st,stds75
+      - st,stlm75
+      - microchip,tcn75
+      - ti,tmp1075
+      - ti,tmp100
+      - ti,tmp101
+      - ti,tmp105
+      - ti,tmp112
+      - ti,tmp175
+      - ti,tmp275
+      - ti,tmp75
+      - ti,tmp75b
+      - ti,tmp75c
+
+  reg:
+    maxItems: 1
+
+  vs-supply:
+    description: phandle to the regulator that provides the +VS supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@48 {
+        compatible = "st,stlm75";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
new file mode 100644
index 0000000000..758ff398b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm87.txt
@@ -0,0 +1,30 @@
+*LM87 hwmon sensor.
+
+Required properties:
+- compatible: Should be
+	"ti,lm87"
+
+- reg: I2C address
+
+optional properties:
+- has-temp3: This configures pins 18 and 19 to be used as a second
+             remote temperature sensing channel. By default the pins
+             are configured as voltage input pins in0 and in5.
+
+- has-in6: When set, pin 5 is configured to be used as voltage input
+           in6. Otherwise the pin is set as FAN1 input.
+
+- has-in7: When set, pin 6 is configured to be used as voltage input
+           in7. Otherwise the pin is set as FAN2 input.
+
+- vcc-supply: a Phandle for the regulator supplying power, can be
+              configured to measure 5.0V power supply. Default is 3.3V.
+
+Example:
+
+lm87@2e {
+	compatible = "ti,lm87";
+	reg = <0x2e>;
+	has-temp3;
+	vcc-supply = <&reg_5v0>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
new file mode 100644
index 0000000000..4e7f6215a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
@@ -0,0 +1,62 @@
+ltc2978
+
+Required properties:
+- compatible: should contain one of:
+  * "lltc,ltc2972"
+  * "lltc,ltc2974"
+  * "lltc,ltc2975"
+  * "lltc,ltc2977"
+  * "lltc,ltc2978"
+  * "lltc,ltc2979"
+  * "lltc,ltc2980"
+  * "lltc,ltc3880"
+  * "lltc,ltc3882"
+  * "lltc,ltc3883"
+  * "lltc,ltc3884"
+  * "lltc,ltc3886"
+  * "lltc,ltc3887"
+  * "lltc,ltc3889"
+  * "lltc,ltc7880"
+  * "lltc,ltm2987"
+  * "lltc,ltm4664"
+  * "lltc,ltm4675"
+  * "lltc,ltm4676"
+  * "lltc,ltm4677"
+  * "lltc,ltm4678"
+  * "lltc,ltm4680"
+  * "lltc,ltm4686"
+  * "lltc,ltm4700"
+- reg: I2C slave address
+
+Optional properties:
+- regulators: A node that houses a sub-node for each regulator controlled by
+  the device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+
+Valid names of regulators depend on number of supplies supported per device:
+  * ltc2972 vout0 - vout1
+  * ltc2974, ltc2975 : vout0 - vout3
+  * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
+  * ltc2978 : vout0 - vout7
+  * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+  * ltc7880 : vout0 - vout1
+  * ltc3883 : vout0
+  * ltm4664 : vout0 - vout1
+  * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+  * ltm4680, ltm4686 : vout0 - vout1
+  * ltm4700 : vout0 - vout1
+
+Example:
+ltc2978@5e {
+	compatible = "lltc,ltc2978";
+	reg = <0x5e>;
+	regulators {
+		vout0 {
+			regulator-name = "FPGA-2.5V";
+		};
+		vout2 {
+			regulator-name = "FPGA-1.5V";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2990.txt b/Documentation/devicetree/bindings/hwmon/ltc2990.txt
new file mode 100644
index 0000000000..f92f54029e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltc2990.txt
@@ -0,0 +1,36 @@
+ltc2990: Linear Technology LTC2990 power monitor
+
+Required properties:
+- compatible: Must be "lltc,ltc2990"
+- reg: I2C slave address
+- lltc,meas-mode:
+	An array of two integers for configuring the chip measurement mode.
+
+	The first integer defines the bits 2..0 in the control register. In all
+	cases the internal temperature and supply voltage are measured. In
+	addition the following input measurements are enabled per mode:
+
+		0: V1, V2, TR2
+		1: V1-V2, TR2
+		2: V1-V2, V3, V4
+		3: TR1, V3, V4
+		4: TR1, V3-V4
+		5: TR1, TR2
+		6: V1-V2, V3-V4
+		7: V1, V2, V3, V4
+
+	The second integer defines the bits 4..3 in the control register. This
+	allows a subset of the measurements to be enabled:
+
+		0: Internal temperature and supply voltage only
+		1: TR1, V1 or V1-V2 only per mode
+		2: TR2, V3 or V3-V4 only per mode
+		3: All measurements per mode
+
+Example:
+
+ltc2990@4c {
+	compatible = "lltc,ltc2990";
+	reg = <0x4c>;
+	lltc,meas-mode = <7 3>;	/* V1, V2, V3, V4 */
+};
diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt
new file mode 100644
index 0000000000..473b34c876
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt
@@ -0,0 +1,10 @@
+Lantiq cpu temperature sensor
+
+Requires node properties:
+- compatible value :
+	"lantiq,cputemp"
+
+Example:
+	cputemp@0 {
+		compatible = "lantiq,cputemp";
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt
new file mode 100644
index 0000000000..106e08c56a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max31785.txt
@@ -0,0 +1,22 @@
+Bindings for the Maxim MAX31785 Intelligent Fan Controller
+==========================================================
+
+Reference:
+
+https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
+
+The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan
+management with temperature and remote voltage sensing. Various fan control
+features are provided, including PWM frequency control, temperature hysteresis,
+dual tachometer measurements, and fan health monitoring.
+
+Required properties:
+- compatible     : One of "maxim,max31785" or "maxim,max31785a"
+- reg            : I2C address, one of 0x52, 0x53, 0x54, 0x55.
+
+Example:
+
+        fans@52 {
+                compatible = "maxim,max31785";
+                reg = <0x52>;
+        };
diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
new file mode 100644
index 0000000000..f6bd87d8e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
@@ -0,0 +1,28 @@
+Bindings for MAX6651 and MAX6650 I2C fan controllers
+
+Reference:
+[1]	https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+Required properties:
+- compatible : One of "maxim,max6650" or "maxim,max6651"
+- reg        : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
+
+Optional properties, default is to retain the chip's current setting:
+- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
+			12000000 uV.
+- maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
+			allow more fine-grained control of slower fans.
+			Valid: 1, 2, 4, 8, 16.
+- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
+			driver selects closed-loop mode and the requested speed.
+			This ensures the fan is already running before userspace
+			takes over.
+
+Example:
+	fan-max6650: max6650@1b {
+		reg = <0x1b>;
+		compatible = "maxim,max6650";
+		maxim,fan-microvolt = <12000000>;
+		maxim,fan-prescale = <4>;
+		maxim,fan-target-rpm = <1200>;
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/max6697.txt b/Documentation/devicetree/bindings/hwmon/max6697.txt
new file mode 100644
index 0000000000..5f793998e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max6697.txt
@@ -0,0 +1,64 @@
+max6697 properties
+
+Required properties:
+- compatible:
+	Should be one of
+		maxim,max6581
+		maxim,max6602
+		maxim,max6622
+		maxim,max6636
+		maxim,max6689
+		maxim,max6693
+		maxim,max6694
+		maxim,max6697
+		maxim,max6698
+		maxim,max6699
+- reg: I2C address
+
+Optional properties:
+
+- smbus-timeout-disable
+	Set to disable SMBus timeout. If not specified, SMBus timeout will be
+	enabled.
+- extended-range-enable
+	Only valid for MAX6581. Set to enable extended temperature range.
+	Extended temperature will be disabled if not specified.
+- beta-compensation-enable
+	Only valid for MAX6693 and MX6694. Set to enable beta compensation on
+	remote temperature channel 1.
+	Beta compensation will be disabled if not specified.
+- alert-mask
+	Alert bit mask. Alert disabled for bits set.
+	Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+	If not specified, alert will be enabled for all channels.
+- over-temperature-mask
+	Over-temperature bit mask. Over-temperature reporting disabled for
+	bits set.
+	Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+	If not specified, over-temperature reporting will be enabled for all
+	channels.
+- resistance-cancellation
+	Boolean for all chips other than MAX6581. Set to enable resistance
+	cancellation on remote temperature channel 1.
+	For MAX6581, resistance cancellation enabled for all channels if
+	specified as boolean, otherwise as per bit mask specified.
+	Only supported for remote temperatures (bit 1..7).
+	If not specified, resistance cancellation will be disabled for all
+	channels.
+- transistor-ideality
+	For MAX6581 only. Two values; first is bit mask, second is ideality
+	select value as per MAX6581 data sheet. Select bit 1..7 for remote
+	channels.
+	Transistor ideality will be initialized to default (1.008) if not
+	specified.
+
+Example:
+
+temp-sensor@1a {
+	compatible = "maxim,max6697";
+	reg = <0x1a>;
+	smbus-timeout-disable;
+	resistance-cancellation;
+	alert-mask = <0x72>;
+	over-temperature-mask = <0x7f>;
+};
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
new file mode 100644
index 0000000000..93e86e3b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max20730
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  The MAX20730 is a fully integrated, highly efficient switching regulator
+  with PMBus for applications operating from 4.5V to 16V and requiring
+  up to 25A (max) load. This single-chip regulator provides extremely
+  compact, high efficiency power-delivery solutions with high-precision
+  output voltages and excellent transient response.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max20730
+      - maxim,max20734
+      - maxim,max20743
+
+  reg:
+    maxItems: 1
+
+  vout-voltage-divider:
+    description: |
+      If voltage divider present at vout, the voltage at voltage sensor pin
+      will be scaled. The properties will convert the raw reading to a more
+      meaningful number if voltage divider present. It has two numbers,
+      the first number is the output resistor, the second number is the total
+      resistance. Therefore, the adjusted vout is equal to
+      Vout = Vout * output_resistance / total resistance.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      max20730@10 {
+        compatible = "maxim,max20730";
+        reg = <0x10>;
+        vout-voltage-divider = <1000 2000>; // vout would be scaled to 0.5
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
new file mode 100644
index 0000000000..390dd6755f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x Hardware Monitor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  Microchip LAN966x temperature monitor and fan controller
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9668-hwmon
+
+  reg:
+    items:
+      - description: PVT registers
+      - description: FAN registers
+
+  reg-names:
+    items:
+      - const: pvt
+      - const: fan
+
+  clocks:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon: hwmon@e2010180 {
+        compatible = "microchip,lan9668-hwmon";
+        reg = <0xe2010180 0xc>,
+              <0xe20042a8 0xc>;
+        reg-names = "pvt", "fan";
+        clocks = <&sys_clk>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
new file mode 100644
index 0000000000..f5e104c1b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP3021 A/D converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3021
+      - microchip,mcp3221
+
+  reg:
+    maxItems: 1
+
+  reference-voltage-microvolt:
+    description:
+      VDD supply power and reference voltage
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@4d {
+            compatible = "microchip,mcp3021";
+            reg = <0x4d>;
+
+            reference-voltage-microvolt = <4500000>; /* 4.5 V */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
new file mode 100644
index 0000000000..51e8619dbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Temperature Monitor
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  Microchip Sparx5 embedded temperature monitor
+
+properties:
+  compatible:
+    enum:
+      - microchip,sparx5-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: System reference clock
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    tmon0: tmon@610508110 {
+        compatible = "microchip,sparx5-temp";
+        reg = <0x10508110 0xc>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&sys_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
new file mode 100644
index 0000000000..56db2292f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Moortec Semiconductor MR75203 PVT Controller
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+  include many different units.
+  Such a design will usually consists of several Moortec's embedded analog IPs,
+  and a single Moortec controller (mr75203) to configure and control the IPs.
+
+  Some of the Moortec's analog hard IPs that can be used in a design:
+  *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+  *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+  *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+  *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+     based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+     oscillator at 1.8V).
+  *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+     be presented for VM for measurement within its range (e.g. mr76006 -
+     divide by 2 pre-scaler).
+
+  TS, VM & PD also include a digital interface, which consists of configuration
+  inputs and measurement outputs.
+
+  Some of the units have number of series, each series can have slightly
+  different characteristics.
+
+  The mr75203 binding describes configuration for the controller unit, but also
+  for some of the analog IPs.
+
+properties:
+  compatible:
+    const: moortec,mr75203
+
+  reg:
+    items:
+      - description: PVT common registers
+      - description: PVT temperature sensor registers
+      - description: PVT process detector registers
+      - description: PVT voltage monitor registers
+
+  reg-names:
+    items:
+      - const: common
+      - const: ts
+      - const: pd
+      - const: vm
+
+  intel,vm-map:
+    description:
+      PVT controller has 5 VM (voltage monitor) sensors.
+      vm-map defines CPU core to VM instance mapping. A
+      value of 0xff means that VM sensor is unused.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 5
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  moortec,vm-active-channels:
+    description:
+      Defines the number of channels per VM that are actually used and are
+      connected to some input source.
+      Maximum number of items - number of VMs.
+      Maximum value of each item - number of channels.
+      Minimum value of each item - 0 (which means entire VM sensor is not used).
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,vm-pre-scaler-x2:
+    description:
+      Defines the channels that use a mr76006 pre-scaler to divide the input
+      source by 2.
+      The pre-scaler is used for input sources that exceed the VM input range.
+      The driver uses this information to present to the user with the actual
+      value of the voltage source.
+      For channels that are not listed, no pre-scaler is assumed.
+      Maximum number of items - total number of channels in all VMs.
+      Each channel should not appear more than once.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,ts-series:
+    description:
+      Definition of the temperature equation and coefficients that shall be
+      used to convert the digital output to value in milli-Celsius.
+    minimum: 5
+    maximum: 6
+    default: 5
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    multipleOf: 100
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    multipleOf: 100
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation.
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    multipleOf: 100
+    maximum: 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pvt: pvt@e0680000 {
+        compatible = "moortec,mr75203";
+        reg = <0xe0680000 0x80>,
+              <0xe0680080 0x180>,
+              <0xe0680200 0x200>,
+              <0xe0680400 0xc00>;
+        reg-names = "common", "ts", "pd", "vm";
+        intel,vm-map = [03 01 04 ff ff];
+        clocks = <&osc0>;
+        resets = <&rcu0 0x40 7>;
+        moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
+        moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
new file mode 100644
index 0000000000..6e59c8fdef
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM90 series thermometer
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1032
+      - adi,adt7461
+      - adi,adt7461a
+      - adi,adt7481
+      - dallas,max6646
+      - dallas,max6647
+      - dallas,max6649
+      - dallas,max6657
+      - dallas,max6658
+      - dallas,max6659
+      - dallas,max6680
+      - dallas,max6681
+      - dallas,max6695
+      - dallas,max6696
+      - gmt,g781
+      - national,lm86
+      - national,lm89
+      - national,lm90
+      - national,lm99
+      - nxp,sa56004
+      - onnn,nct1008
+      - ti,tmp451
+      - ti,tmp461
+      - winbond,w83l771
+
+
+  interrupts:
+    items:
+      - description: |
+          Single interrupt specifier which describes the LM90 "-ALERT" pin
+          output.
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vcc-supply:
+    description: phandle to the regulator that provides the +VCC supply
+
+  ti,extended-range-enable:
+    description: Set to enable extended range temperature.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@([0-2])$":
+    type: object
+    description: Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: The channel number. 0 is local channel, 1-2 are remote channels.
+        items:
+          minimum: 0
+          maximum: 2
+
+      label:
+        description: A descriptive name for this channel, like "ambient" or "psu".
+
+      temperature-offset-millicelsius:
+        description: Temperature offset to be added to or subtracted from remote temperature measurements.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,adt7461
+                - adi,adt7461a
+                - adi,adt7481
+                - ti,tmp451
+                - ti,tmp461
+    then:
+      properties:
+        ti,extended-range-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,max6646
+              - dallas,max6647
+              - dallas,max6649
+              - dallas,max6657
+              - dallas,max6658
+              - dallas,max6659
+              - dallas,max6695
+              - dallas,max6696
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adt7461
+              - adi,adt7461a
+              - adi,adt7481
+              - onnn,nct1008
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127750
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1032
+              - dallas,max6680
+              - dallas,max6681
+              - gmt,g781
+              - national,lm86
+              - national,lm89
+              - national,lm90
+              - national,lm99
+              - nxp,sa56004
+              - winbond,w83l771
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127875
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp451
+              - ti,tmp461
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127937
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "onnn,nct1008";
+            reg = <0x4c>;
+            vcc-supply = <&palmas_ldo6_reg>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "adi,adt7481";
+            reg = <0x4c>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0x0>;
+                label = "local";
+            };
+
+            channel@1 {
+                reg = <0x1>;
+                label = "front";
+                temperature-offset-millicelsius = <4000>;
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                label = "back";
+                temperature-offset-millicelsius = <750>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
new file mode 100644
index 0000000000..8523777f56
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
@@ -0,0 +1,84 @@
+Nuvoton NPCM7xx PWM and Fan Tacho controller device
+
+The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM)
+controller outputs and 16 Fan tachometer controller inputs.
+
+Required properties for pwm-fan node
+- #address-cells : should be 1.
+- #size-cells	: should be 0.
+- compatible	: "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX.
+- reg			: specifies physical base address and size of the registers.
+- reg-names	: must contain:
+					* "pwm" for the PWM registers.
+					* "fan" for the Fan registers.
+- clocks		: phandle of reference clocks.
+- clock-names	: must contain
+					* "pwm" for PWM controller operating clock.
+					* "fan" for Fan controller operating clock.
+- interrupts	: contain the Fan interrupts with flags for falling edge.
+- pinctrl-names	: a pinctrl state named "default" must be defined.
+- pinctrl-0	: phandle referencing pin configuration of the PWM and Fan
+					controller ports.
+
+fan subnode format:
+===================
+Under fan subnode can be upto 8 child nodes, each child node representing a fan.
+Each fan subnode must have one PWM channel and at least one Fan tach channel.
+
+For PWM channel can be configured cooling-levels to create cooling device.
+Cooling device could be bound to a thermal zone for the thermal control.
+
+Required properties for each child node:
+- reg : specify the PWM output channel.
+	integer value in the range 0 through 7, that represent
+	the PWM channel number that used.
+
+- fan-tach-ch : specify the Fan tach input channel.
+		integer value in the range 0 through 15, that represent
+		the fan tach channel number that used.
+
+		At least one Fan tach input channel is required
+
+Optional property for each child node:
+- cooling-levels: PWM duty cycle values in a range from 0 to 255
+                  which correspond to thermal cooling states.
+
+Examples:
+
+pwm_fan:pwm-fan-controller@103000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "nuvoton,npcm750-pwm-fan";
+	reg = <0x103000 0x2000>,
+		<0x180000 0x8000>;
+	reg-names = "pwm", "fan";
+	clocks = <&clk NPCM7XX_CLK_APB3>,
+		<&clk NPCM7XX_CLK_APB4>;
+	clock-names = "pwm","fan";
+	interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins
+			&fanin0_pins &fanin1_pins &fanin2_pins
+			&fanin3_pins &fanin4_pins>;
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00 0x01>;
+		cooling-levels = <127 255>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt
new file mode 100644
index 0000000000..0863e067c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt
@@ -0,0 +1,20 @@
+Bindings for the fan / temperature monitor microcontroller used on
+the Zyxel NSA 320 and several subsequent models.
+
+Required properties:
+- compatible	: "zyxel,nsa320-mcu"
+- data-gpios	: The GPIO pin connected to the data line on the MCU
+- clk-gpios	: The GPIO pin connected to the clock line on the MCU
+- act-gpios	: The GPIO pin connected to the active line on the MCU
+
+Example:
+
+	hwmon {
+		compatible = "zyxel,nsa320-mcu";
+		pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+		pinctrl-names = "default";
+
+		data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
new file mode 100644
index 0000000000..3d0146e20d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/hwmon/ntc-thermistor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NTC thermistor temperature sensors
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Thermistors with negative temperature coefficient (NTC) are resistors that
+  vary in resistance in an often non-linear way in relation to temperature.
+  The negative temperature coefficient means that the resistance decreases
+  as the temperature rises. Since the relationship between resistance and
+  temperature is non-linear, software drivers most often need to use a look
+  up table and interpolation to get from resistance to temperature.
+
+  When used in practice, a thermistor is often connected between ground, a
+  pull-up resistor or/and a pull-down resistor and a fixed voltage like this:
+
+      + e.g. 5V = pull-up voltage (puv)
+      |
+     +-+
+     | |
+     | | Pull-up resistor
+     | | (puo)
+     +-+
+      |-------------------------o
+     +-+ |                      ^
+     | |/                       |
+     | /                        |
+     |/| Thermistor             | Measured voltage (mv)
+     / |                        | "connected ground"
+    /| |                        |
+     +-+                        |
+      |-------------------------o
+     +-+                        ^
+     | |                        |
+     | | Pull-down resistor     | Measured voltage (mv)
+     | | (pdo)                  | "connected positive"
+     +-+                        |
+      |                         |
+      |                         v
+      + GND                     GND
+
+  The arrangements of where we measure the voltage over the thermistor are
+  called "connected ground" and "connected positive" and shall be understood as
+  the cases when either pull-up or pull-down resistance is zero.
+
+  If the pull-up resistance is 0 one end of the thermistor is connected to the
+  positive voltage and we get the thermistor on top of a pull-down resistor
+  and we take the measure between the thermistor and the pull-down resistor.
+
+  Conversely if the pull-down resistance is zero, one end of the thermistor is
+  connected to ground and we get the thermistor under the pull-up resistor
+  and we take the measure between the pull-up resistor and the thermistor.
+
+  We can use both pull-up and pull-down resistors at the same time, and then
+  the figure illustrates where the voltage will be measured for the "connected
+  ground" and "connected positive" cases.
+
+properties:
+  $nodename:
+    pattern: "^thermistor(.*)?$"
+
+  compatible:
+    oneOf:
+      - const: epcos,b57330v2103
+      - const: epcos,b57891s0103
+      - const: murata,ncp15wb473
+      - const: murata,ncp18wb473
+      - const: murata,ncp21wb473
+      - const: murata,ncp03wb473
+      - const: murata,ncp15wl333
+      - const: murata,ncp03wf104
+      - const: murata,ncp15xh103
+      - const: samsung,1404-001221
+      # Deprecated "ntp," compatible strings
+      - const: ntc,ncp15wb473
+        deprecated: true
+      - const: ntc,ncp18wb473
+        deprecated: true
+      - const: ntc,ncp21wb473
+        deprecated: true
+      - const: ntc,ncp03wb473
+        deprecated: true
+      - const: ntc,ncp15wl333
+        deprecated: true
+
+  "#thermal-sensor-cells":
+    description: Thermal sensor cells if used for thermal sensoring.
+    const: 0
+
+  pullup-uv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-up voltage in micro volts. Must always be specified.
+
+  pullup-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-up resistance in ohms. Must always be specified, even
+      if zero.
+
+  pulldown-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-down resistance in ohms. Must always be specified, even
+      if zero.
+
+  connected-positive:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates how the thermistor is connected in series with
+      a pull-up and/or a pull-down resistor. See the description above for
+      an illustration. If this flag is NOT specified, the thermistor is assumed
+      to be connected-ground, which usually means a pull-down resistance of
+      zero but complex arrangements are possible.
+
+  # See /schemas/iio/adc/adc.yaml
+  io-channels:
+    maxItems: 1
+    description: IIO ADC channel to read the voltage over the resistor. Must
+      always be specified.
+
+required:
+  - compatible
+  - pullup-uv
+  - pullup-ohm
+  - pulldown-ohm
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    thermistor {
+      compatible = "murata,ncp18wb473";
+      io-channels = <&gpadc 0x06>;
+      pullup-uv = <1800000>;
+      pullup-ohm = <220000>;
+      pulldown-ohm = <0>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
new file mode 100644
index 0000000000..358b262431
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT6775 and compatible Super I/O chips
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct6106
+      - nuvoton,nct6116
+      - nuvoton,nct6775
+      - nuvoton,nct6776
+      - nuvoton,nct6779
+      - nuvoton,nct6791
+      - nuvoton,nct6792
+      - nuvoton,nct6793
+      - nuvoton,nct6795
+      - nuvoton,nct6796
+      - nuvoton,nct6797
+      - nuvoton,nct6798
+
+  reg:
+    maxItems: 1
+
+  nuvoton,tsi-channel-mask:
+    description:
+      Bitmask indicating which TSI temperature sensor channels are
+      active.  LSB is TSI0, bit 1 is TSI1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0xff
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        superio@4d {
+            compatible = "nuvoton,nct6779";
+            reg = <0x4d>;
+            nuvoton,tsi-channel-mask = <0x03>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
new file mode 100644
index 0000000000..cd8dcd7970
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT7802Y Hardware Monitoring IC
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  The NCT7802Y is a hardware monitor IC which supports one on-die and up to
+  5 remote temperature sensors with SMBus interface.
+
+  Datasheets:
+    https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf
+
+additionalProperties: false
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7802
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        items:
+          - enum:
+              - 0    # Local Temperature Sensor ("LTD")
+              - 1    # Remote Temperature Sensor or Voltage Sensor 1 ("RTD1")
+              - 2    # Remote Temperature Sensor or Voltage Sensor 2 ("RTD2")
+              - 3    # Remote Temperature Sensor or Voltage Sensor 3 ("RTD3")
+
+      sensor-type:
+        items:
+          - enum:
+              - temperature
+              - voltage
+
+      temperature-mode:
+        items:
+          - enum:
+              - thermistor
+              - thermal-diode
+
+    required:
+      - reg
+
+    allOf:
+      # For channels RTD1, RTD2 and RTD3, require sensor-type to be set.
+      # Otherwise (for all other channels), do not allow temperature-mode to be
+      # set.
+      - if:
+          properties:
+            reg:
+              items:
+                - enum:
+                    - 1
+                    - 2
+                    - 3
+        then:
+          required:
+            - sensor-type
+        else:
+          not:
+            required:
+              - sensor-type
+
+      # For channels RTD1 and RTD2 and if sensor-type is "temperature", require
+      # temperature-mode to be set. Otherwise (for all other channels or
+      # sensor-type settings), do not allow temperature-mode to be set
+      - if:
+          properties:
+            reg:
+              items:
+                - enum:
+                    - 1
+                    - 2
+            sensor-type:
+              items:
+                - enum:
+                    - temperature
+        then:
+          required:
+            - temperature-mode
+        else:
+          not:
+            required:
+              - temperature-mode
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nct7802@28 {
+            compatible = "nuvoton,nct7802";
+            reg = <0x28>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 { /* LTD */
+                reg = <0>;
+            };
+
+            channel@1 { /* RTD1 */
+                reg = <1>;
+                sensor-type = "voltage";
+            };
+
+            channel@2 { /* RTD2 */
+                reg = <2>;
+                sensor-type = "temperature";
+                temperature-mode = "thermal-diode";
+            };
+
+            channel@3 { /* RTD3 */
+                reg = <3>;
+                sensor-type = "temperature";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml
new file mode 100644
index 0000000000..48d654e521
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MC34VR500 hwmon sensor
+
+maintainers:
+  - Mario Kicherer <dev@kicherer.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,mc34vr500
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@8 {
+        compatible = "nxp,mc34vr500";
+        reg = <0x08>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
new file mode 100644
index 0000000000..da8292bc32
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,lm25066.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: National Semiconductor/Texas Instruments LM250x6/LM506x power-management ICs
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+description: |
+  The LM25066 family of power-management ICs (a.k.a. hot-swap
+  controllers or eFuses in various contexts) are PMBus devices that
+  offer temperature, current, voltage, and power monitoring.
+
+  Datasheet: https://www.ti.com/lit/ds/symlink/lm25066.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lm25056
+      - ti,lm25066
+      - ti,lm5064
+      - ti,lm5066
+      - ti,lm5066i
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@40 {
+            compatible = "ti,lm25066";
+            reg = <0x40>;
+            shunt-resistor-micro-ohms = <675>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
new file mode 100644
index 0000000000..e8feee38c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,ucd90320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UCD90320 power sequencer
+
+maintainers:
+  - Jim Wright <wrightj@linux.vnet.ibm.com>
+
+description: |
+  The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and
+  monitor. The 24 integrated ADC channels (AMONx) monitor the power supply
+  voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as
+  digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for
+  margining (MARx), 16 for logical GPO, and 32 GPIs for cascading, and system
+  function.
+
+  http://focus.ti.com/lit/ds/symlink/ucd90320.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,ucd90320
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ucd90320@11 {
+            compatible = "ti,ucd90320";
+            reg = <0x11>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
new file mode 100644
index 0000000000..48886f0ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -0,0 +1 @@
+This file has moved to pwm-fan.yaml.
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
new file mode 100644
index 0000000000..4e5abf7580
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to PWM lines
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: pwm-fan
+
+  cooling-levels:
+    description: PWM duty cycle values corresponding to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maximum: 255
+
+  fan-supply:
+    description: Phandle to the regulator that provides power to the fan.
+
+  interrupts:
+    description:
+      This contains an interrupt specifier for each fan tachometer output
+      connected to an interrupt source. The output signal must generate a
+      defined number of interrupts per fan revolution, which require that
+      it must be self resetting edge interrupts.
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Define the number of pulses per fan revolution for each tachometer
+      input as an integer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 2
+
+  pwms:
+    description: The PWM that is used to control the fan.
+    maxItems: 1
+
+  "#cooling-cells": true
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm-fan {
+      compatible = "pwm-fan";
+      cooling-levels = <0 102 170 230>;
+      pwms = <&pwm 0 10000 0>;
+      #cooling-cells = <2>;
+    };
+
+    thermal-zones {
+      cpu_thermal: cpu-thermal {
+        thermal-sensors = <&tmu 0>;
+        polling-delay-passive = <0>;
+        polling-delay = <0>;
+
+        trips {
+          cpu_alert1: cpu-alert1 {
+            temperature = <100000>; /* millicelsius */
+            hysteresis = <2000>; /* millicelsius */
+            type = "passive";
+          };
+        };
+
+        cooling-maps {
+          map0 {
+            trip = <&cpu_alert1>;
+            cooling-device = <&fan0 0 1>;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm-fan {
+      compatible = "pwm-fan";
+      pwms = <&pwm 0 40000 0>;
+      fan-supply = <&reg_fan>;
+      interrupt-parent = <&gpio5>;
+      interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+      pulses-per-revolution = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
new file mode 100644
index 0000000000..14ac783c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHT15 humidity and temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: sensirion,sht15
+
+  clk-gpios:
+    maxItems: 1
+
+  data-gpios:
+    maxItems: 1
+
+  vcc-supply:
+    description: regulator that drives the VCC pin
+
+required:
+  - compatible
+  - clk-gpios
+  - data-gpios
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "sensirion,sht15";
+        clk-gpios = <&gpio4 12 0>;
+        data-gpios = <&gpio4 13 0>;
+        vcc-supply = <&reg_sht15>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sensor>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 0000000000..3d14d5fc96
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+  - Christopher Ruehl chris.ruehl@gtsys.com.hk
+
+description: |
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
+  designed especially for battery-driven high-volume consumer electronics
+  applications.
+  For further information refer to Documentation/hwmon/shtc1.rst
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,shtc1
+      - sensirion,shtw1
+      - sensirion,shtc3
+
+  reg:
+    const: 0x70
+
+  sensirion,blocking-io:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, the driver holds the i2c bus until the measurement is finished.
+
+  sensirion,low-precision:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+
+      shtc3@70 {
+        compatible = "sensirion,shtc3";
+        reg = <0x70>;
+        sensirion,blocking-io;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
new file mode 100644
index 0000000000..733cba7801
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH71x0 Temperature Sensor
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+description: |
+  StarFive Technology Co. JH71x0 embedded temperature sensor
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-temp
+      - starfive,jh7110-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sense
+      - const: bus
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: sense
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+
+    temperature-sensor@124a0000 {
+        compatible = "starfive,jh7100-temp";
+        reg = <0x124a0000 0x10000>;
+        clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
+                 <&clkgen JH7100_CLK_TEMP_APB>;
+        clock-names = "sense", "bus";
+        #thermal-sensor-cells = <0>;
+        resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
+                 <&rstgen JH7100_RSTN_TEMP_APB>;
+        reset-names = "sense", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt
new file mode 100644
index 0000000000..3ee1dc30e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/stts751.txt
@@ -0,0 +1,15 @@
+* STTS751 thermometer.
+
+Required node properties:
+- compatible: "stts751"
+- reg: I2C bus address of the device
+
+Optional properties:
+- smbus-timeout-disable: when set, the smbus timeout function will be disabled
+
+Example stts751 node:
+
+temp-sensor {
+	compatible = "stts751";
+	reg = <0x48>;
+}
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
new file mode 100644
index 0000000000..926be9a290
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7828/ADS7830 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The ADS7828 is 12-Bit, 8-Channel Sampling Analog to Digital Converter (ADC)
+  with an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADS7828
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7828
+      - ti,ads7830
+
+  reg:
+    maxItems: 1
+
+  ti,differential-input:
+    description:
+      Set to use the device in differential mode.
+    type: boolean
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            compatible = "ti,ads7828";
+            reg = <0x48>;
+            vref-supply = <&vref>;
+            ti,differential-input;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
new file mode 100644
index 0000000000..8648877d2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments INA209 family of power/voltage monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The INA209 is a high-side current shunt and power monitor with
+  an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/INA209
+
+properties:
+  compatible:
+    enum:
+      - ti,ina209
+      - ti,ina219
+      - ti,ina220
+      - ti,ina226
+      - ti,ina230
+      - ti,ina231
+      - ti,ina238
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor:
+    description:
+      Shunt resistor value in micro-Ohm.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  vs-supply:
+    description: phandle to the regulator that provides the VS supply typically
+      in range from 2.7 V to 5.5 V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@44 {
+            compatible = "ti,ina220";
+            reg = <0x44>;
+            shunt-resistor = <1000>;
+            vs-supply = <&vdd_3v0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
new file mode 100644
index 0000000000..7e5b62a021
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP102 temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp102
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "ti,tmp102";
+            reg = <0x48>;
+            interrupt-parent = <&gpio7>;
+            interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
new file mode 100644
index 0000000000..8b5307c875
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP108 temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp108
+
+  interrupts:
+    items:
+      - description: alert interrupt
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "ti,tmp108";
+            reg = <0x48>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tmp_alrt>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
new file mode 100644
index 0000000000..0e8ddf0ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP401, TPM411 and TMP43x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+
+  Datasheets:
+  https://www.ti.com/lit/ds/symlink/tmp401.pdf
+  https://www.ti.com/lit/ds/symlink/tmp411.pdf
+  https://www.ti.com/lit/ds/symlink/tmp431.pdf
+  https://www.ti.com/lit/ds/symlink/tmp435.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp401
+      - ti,tmp411
+      - ti,tmp431
+      - ti,tmp432
+      - ti,tmp435
+
+  reg:
+    maxItems: 1
+
+  ti,extended-range-enable:
+    description:
+      When set, this sensor measures over extended temperature range.
+    type: boolean
+
+  ti,n-factor:
+    description:
+      value to be used for converting remote channel measurements to
+      temperature.
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -128
+    maximum: 127
+
+  ti,beta-compensation:
+    description:
+      value to select beta correction range.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+    then:
+      properties:
+        ti,n-factor: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+              - ti,tmp411
+    then:
+      properties:
+        ti,beta-compensation: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp401";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp431";
+        reg = <0x4c>;
+        ti,extended-range-enable;
+        ti,n-factor = <0x3b>;
+        ti,beta-compensation = <0x7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
new file mode 100644
index 0000000000..a6f1fa75a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp421.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP42x/TMP44x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp422.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp421
+      - ti,tmp422
+      - ti,tmp423
+      - ti,tmp441
+      - ti,tmp442
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-3])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-3 are remote channels
+        items:
+          minimum: 0
+          maximum: 3
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp422";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp422";
+        reg = <0x4c>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          ti,n-factor = <0x1>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <0x0>;
+          label = "somelabel";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
new file mode 100644
index 0000000000..f9c00cbb28
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP464 and TMP468 temperature sensors
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±0.0625°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp464.pdf
+  https://www.ti.com/lit/ds/symlink/tmp468.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp464
+      - ti,tmp468
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-8])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-8 are remote channels.
+        items:
+          minimum: 0
+          maximum: 8
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <(-10)>;
+          label = "external";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          ti,n-factor = <0x10>;
+          label = "somelabel";
+        };
+
+        channel@3 {
+          reg = <0x3>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
new file mode 100644
index 0000000000..cdd1489e0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,tmp513.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP513/512 system monitor sensor
+
+maintainers:
+  - Eric Tremblay <etremblay@distech-controls.com>
+
+description: |
+  The TMP512 (dual-channel) and TMP513 (triple-channel) are system monitors
+  that include remote sensors, a local temperature sensor, and a high-side
+  current shunt monitor. These system monitors have the capability of measuring
+  remote temperatures, on-chip temperatures, and system voltage/power/current
+  consumption.
+
+  Datasheets:
+  https://www.ti.com/lit/gpn/tmp513
+  https://www.ti.com/lit/gpn/tmp512
+
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp512
+      - ti,tmp513
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: |
+      If 0, the calibration process will be skipped and the current and power
+      measurement engine will not work. Temperature and voltage measurement
+      will continue to work. The shunt value also need to respect:
+      rshunt <= pga-gain * 40 * 1000 * 1000.
+      If not, it's not possible to compute a valid calibration value.
+    default: 1000
+
+  ti,pga-gain:
+    description: |
+      The gain value for the PGA function. This is 8, 4, 2 or 1.
+      The PGA gain affect the shunt voltage range.
+      The range will be equal to: pga-gain * 40mV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+    default: 8
+
+  ti,bus-range-microvolt:
+    description: |
+      This is the operating range of the bus voltage in microvolt
+    enum: [16000000, 32000000]
+    default: 32000000
+
+  ti,nfactor:
+    description: |
+      Array of three(TMP513) or two(TMP512) n-Factor value for each remote
+      temperature channel.
+      See datasheet Table 11 for n-Factor range list and value interpretation.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      default: 0x00
+      minimum: 0x00
+      maximum: 0xFF
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tmp513@5c {
+            compatible = "ti,tmp513";
+            reg = <0x5c>;
+            shunt-resistor-micro-ohms = <330000>;
+            ti,bus-range-microvolt = <32000000>;
+            ti,pga-gain = <8>;
+            ti,nfactor = <0x1 0xf3 0x00>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
new file mode 100644
index 0000000000..ebc8d466c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,tps23861.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS23861 PoE PSE
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  The TPS23861 is a IEEE 802.3at Quad Port Power-over-Ethernet PSE Controller.
+
+  Datasheets:
+  https://www.ti.com/lit/gpn/tps23861
+
+
+properties:
+  compatible:
+    enum:
+      - ti,tps23861
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor in microohms.
+    default: 255000
+    minimum: 250000
+    maximum: 255000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps23861@30 {
+            compatible = "ti,tps23861";
+            reg = <0x30>;
+            shunt-resistor-micro-ohms = <255000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
new file mode 100644
index 0000000000..4a4df4ffc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -0,0 +1,23 @@
+Versatile Express hwmon sensors
+-------------------------------
+
+Requires node properties:
+- "compatible" value : one of
+	"arm,vexpress-volt"
+	"arm,vexpress-amp"
+	"arm,vexpress-temp"
+	"arm,vexpress-power"
+	"arm,vexpress-energy"
+- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
+  for more details)
+
+Optional node properties:
+- label : string describing the monitored value
+
+Example:
+	energy@0 {
+		compatible = "arm,vexpress-energy";
+		arm,vexpress-sysreg,func = <13 0>;
+		label = "A15 Jcore";
+	};
diff --git a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
new file mode 100644
index 0000000000..31ce77a4b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/winbond,w83781d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Winbond W83781 and compatible hardware monitor IC
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - winbond,w83781d
+      - winbond,w83781g
+      - winbond,w83782d
+      - winbond,w83783s
+      - asus,as99127f
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@28 {
+            compatible = "winbond,w83781d";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
new file mode 100644
index 0000000000..5a799246a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface)
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: allwinner,sun6i-a31-p2wi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 6000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@1f03400 {
+        compatible = "allwinner,sun6i-a31-p2wi";
+        reg = <0x01f03400 0x400>;
+        interrupts = <0 39 4>;
+        clocks = <&apb0_gates 3>;
+        clock-frequency = <100000>;
+        resets = <&apb0_rst 3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        axp221: pmic@68 {
+            /* compatible = "x-powers,axp221"; */
+            reg = <0x68>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
new file mode 100644
index 0000000000..26bed558c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson I2C Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Beniamino Galvani <b.galvani@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-i2c # Meson6, Meson8 and compatible SoCs
+      - amlogic,meson-gxbb-i2c # GXBB and compatible SoCs
+      - amlogic,meson-axg-i2c # AXG and compatible SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@c8100500 {
+        compatible = "amlogic,meson6-i2c";
+        reg = <0xc8100500 0x20>;
+        interrupts = <92>;
+        clocks = <&clk81>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@52 {
+            compatible = "atmel,24c32";
+            reg = <0x52>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
new file mode 100644
index 0000000000..077d2a539c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple/PASemi I2C controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description: |
+  Apple SoCs such as the M1 come with a I2C controller based on the one found
+  in machines with P. A. Semi's PWRficient processors.
+  The bus is used to communicate with e.g. USB PD chips or the speaker
+  amp.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-i2c
+          - apple,t8112-i2c
+          - apple,t6000-i2c
+      - const: apple,i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: I2C bus reference clock
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. If not specified, 100 kHz will be
+      used. This frequency is generated by dividing the reference clock.
+      Allowed values are between ref_clk/(16*4) and ref_clk/(16*255).
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@35010000 {
+      compatible = "apple,t8103-i2c", "apple,i2c";
+      reg = <0x35010000 0x4000>;
+      interrupt-parent = <&aic>;
+      interrupts = <0 627 4>;
+      clocks = <&ref_clk>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
new file mode 100644
index 0000000000..e58465d1b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on ARM Ltd development platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-i2c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+...
+
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
new file mode 100644
index 0000000000..6df27b47b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
+
+maintainers:
+  - Rayn Chen <rayn_chen@aspeedtech.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-i2c-bus
+      - aspeed,ast2500-i2c-bus
+      - aspeed,ast2600-i2c-bus
+
+  reg:
+    minItems: 1
+    items:
+      - description: address offset and range of bus
+      - description: address offset and range of bus buffer
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      root clock of bus, should reference the APB
+      clock in the second cell
+
+  resets:
+    maxItems: 1
+
+  bus-frequency:
+    minimum: 500
+    maximum: 4000000
+    default: 100000
+    description: frequency of the bus clock in Hz defaults to 100 kHz when not
+      specified
+
+  multi-master:
+    type: boolean
+    description:
+      states that there is another master active on this bus
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    i2c@40 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "aspeed,ast2500-i2c-bus";
+      reg = <0x40 0x40>;
+      clocks = <&syscon ASPEED_CLK_APB>;
+      resets = <&syscon ASPEED_RESET_I2C>;
+      bus-frequency = <100000>;
+      interrupts = <0>;
+      interrupt-parent = <&i2c_ic>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
new file mode 100644
index 0000000000..6adedd3ec3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-i2c
+              - atmel,at91sam9261-i2c
+              - atmel,at91sam9260-i2c
+              - atmel,at91sam9g20-i2c
+              - atmel,at91sam9g10-i2c
+              - atmel,at91sam9x5-i2c
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+      - items:
+          - const: microchip,sama7g5-i2c
+          - const: microchip,sam9x60-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    items:
+      - description: TX DMA Channel Specifier
+      - description: RX DMA Channel Specifier
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for
+      FIFO capable I2C controllers.
+
+  scl-gpios: true
+
+  sda-gpios: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+allOf:
+  - $ref: i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+              - microchip,sama7g5-i2c
+    then:
+      properties:
+        i2c-sda-hold-time-ns:
+          description:
+            TWD hold time
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0: i2c@fff84000 {
+        compatible = "atmel,at91sam9g20-i2c";
+        reg = <0xfff84000 0x100>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&twi0_clk>;
+        clock-frequency = <400000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c512";
+            reg = <0x50>;
+            pagesize = <128>;
+        };
+    };
+
+    i2c1: i2c@f8034600 {
+        compatible = "atmel,sama5d2-i2c";
+        reg = <0xf8034600 0x100>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(11)>,
+               <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(12)>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&flx0>;
+        atmel,fifo-size = <16>;
+        i2c-sda-hold-time-ns = <336>;
+        pinctrl-names = "default", "gpio";
+        pinctrl-0 = <&pinctrl_i2c0>;
+        pinctrl-1 = <&pinctrl_i2c0_gpio>;
+        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+        eeprom@54 {
+            compatible = "atmel,24c02";
+            reg = <0x54>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
new file mode 100644
index 0000000000..8256490a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 I2C controller
+
+maintainers:
+  - Stephen Warren <swarren@wwwdotorg.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - brcm,bcm2835-i2c
+      - items:
+          - const: brcm,bcm2711-i2c
+          - const: brcm,bcm2835-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7e205000 {
+        compatible = "brcm,bcm2835-i2c";
+        reg = <0x7e205000 0x1000>;
+        interrupts = <2 21>;
+        clocks = <&clk_i2c>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
new file mode 100644
index 0000000000..7070c04469
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,brcmstb-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB BSC IIC Master Controller
+
+maintainers:
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-hdmi-i2c
+      - brcm,brcmstb-i2c
+      - brcm,brcmper-i2c
+
+  reg:
+    minItems: 1
+    items:
+      - description: BSC register range
+      - description: Auto-I2C register range
+
+  reg-names:
+    items:
+      - const: bsc
+      - const: auto-i2c
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum:
+      - 46875
+      - 50000
+      - 93750
+      - 97500
+      - 187500
+      - 200000
+      - 375000
+      - 390000
+
+required:
+  - compatible
+  - reg
+  - clock-frequency
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm2711-hdmi-i2c
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+examples:
+  - |
+      bsca: i2c@f0406200 {
+          clock-frequency = <390000>;
+          compatible = "brcm,brcmstb-i2c";
+          interrupt-parent = <&irq0_intc>;
+          reg = <0xf0406200 0x58>;
+          interrupts = <0x18>;
+          interrupt-names = "upg_bsca";
+      };
+
+  - |
+      ddc0: i2c@7ef04500 {
+          compatible = "brcm,bcm2711-hdmi-i2c";
+          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+          reg-names = "bsc", "auto-i2c";
+          clock-frequency = <390000>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
new file mode 100644
index 0000000000..2aa75b7add
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,iproc-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc I2C controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,iproc-i2c
+      - brcm,iproc-nic-i2c
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  interrupts:
+    description: |
+      Should contain the I2C interrupt. For certain revisions of the I2C
+      controller, I2C interrupt is unwired to the interrupt controller. In such
+      case, this property should be left unspecified, and driver will fall back
+      to polling mode
+    maxItems: 1
+
+  brcm,ape-hsls-addr-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Host view of address mask into the 'APE' co-processor
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,iproc-nic-i2c
+    then:
+      required:
+        - brcm,ape-hsls-addr-mask
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clock-frequency
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@18008000 {
+        compatible = "brcm,iproc-i2c";
+        reg = <0x18008000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+        clock-frequency = <100000>;
+
+        wm8750@1a {
+            compatible = "wlf,wm8750";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
new file mode 100644
index 0000000000..7a694af90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,kona-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family I2C controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-i2c
+          - brcm,bcm21664-i2c
+          - brcm,bcm23550-i2c
+      - const: brcm,kona-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000, 1000000, 3400000 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@3e016000 {
+        compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+        reg = <0x3e016000 0x80>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bsc1_clk>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
new file mode 100644
index 0000000000..9f1d35ce1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I2C controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,i2c-r1p10 # cadence i2c controller version 1.0
+      - cdns,i2c-r1p14 # cadence i2c controller version 1.4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+    description: |
+      Desired operating frequency, in Hz, of the bus.
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+  fifo-depth:
+    description:
+      Size of the data FIFO in bytes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16
+    enum: [2, 4, 8, 16, 32, 64, 128, 256]
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@e0004000 {
+        compatible = "cdns,i2c-r1p10";
+        clocks = <&clkc 38>;
+        resets = <&rstc 288>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xe0004000 0x1000>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        fifo-depth = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
new file mode 100644
index 0000000000..ab151c9db2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
+
+maintainers:
+  - Doug Anderson <dianders@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  On some ChromeOS board designs we've got a connection to the EC
+  (embedded controller) but no direct connection to some devices on the
+  other side of the EC (like a battery and PMIC).  To get access to
+  those devices we need to tunnel our i2c commands through the EC.
+
+  The node for this device should be under a cros-ec node like
+  google,cros-ec-spi or google,cros-ec-i2c.
+
+allOf:
+  - $ref: i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: google,cros-ec-i2c-tunnel
+
+  google,remote-bus:
+    description: The EC bus we'd like to talk to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - google,remote-bus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupts = <99 0>;
+
+            i2c-tunnel {
+                compatible = "google,cros-ec-i2c-tunnel";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                google,remote-bus = <0>;
+
+                battery: sbs-battery@b {
+                    compatible = "sbs,sbs-battery";
+                    reg = <0xb>;
+                    sbs,poll-retry-count = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
new file mode 100644
index 0000000000..7d7a8de7bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hisilicon,ascend910-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common I2C controller
+
+maintainers:
+  - Yicong Yang <yangyicong@hisilicon.com>
+
+description:
+  The HiSilicon common I2C controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 400000
+
+  i2c-sda-falling-time-ns:
+    default: 343
+
+  i2c-scl-falling-time-ns:
+    default: 203
+
+  i2c-sda-hold-time-ns:
+    default: 830
+
+  i2c-scl-rising-time-ns:
+    default: 365
+
+  i2c-digital-filter-width-ns:
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@38b0000 {
+      compatible = "hisilicon,ascend910-i2c";
+      reg = <0x38b0000 0x10000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      i2c-sda-falling-time-ns = <56>;
+      i2c-scl-falling-time-ns = <56>;
+      i2c-sda-hold-time-ns = <56>;
+      i2c-scl-rising-time-ns = <56>;
+      i2c-digital-filter;
+      i2c-digital-filter-width-ns = <0x0>;
+      clocks = <&alg_clk>;
+      clock-frequency = <400000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
new file mode 100644
index 0000000000..6604dcd472
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hpe,gxp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP SoC I2C Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  hpe,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the global status and enable interrupt registers shared
+      between each I2C engine controller instance. It enables the I2C
+      engine controller to act as both a master or slave by being able to
+      arm and respond to interrupts from its engine. Each bit in the
+      registers represent the respective bit position.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2600 {
+        compatible = "hpe,gxp-i2c";
+        reg = <0x2500 0x70>;
+        interrupts = <9>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hpe,sysreg = <&sysreg_system_controller>;
+        clock-frequency = <10000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
new file mode 100644
index 0000000000..767664f448
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
@@ -0,0 +1,39 @@
+* Altera I2C Controller
+* This is Altera's synthesizable logic block I2C Controller for use
+* in Altera's FPGAs.
+
+Required properties :
+ - compatible : should be "altr,softip-i2c-v1.0"
+ - reg        : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks     : phandle to input clock.
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Recommended properties :
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Optional properties :
+ - fifo-size : Size of the RX and TX FIFOs in bytes.
+ - Child nodes conforming to i2c bus binding
+
+Example :
+
+	i2c@100080000 {
+		compatible = "altr,softip-i2c-v1.0";
+		reg = <0x00000001 0x00080000 0x00000040>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 43 4>;
+		clocks = <&clk_0>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fifo-size = <4>;
+
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml
new file mode 100644
index 0000000000..b618b5a343
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-arb-gpio-challenge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+
+maintainers:
+  - Doug Anderson <dianders@chromium.org>
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  This uses GPIO lines and a challenge & response mechanism to arbitrate who is
+  the master of an I2C bus in a multimaster situation.
+
+  In many cases using GPIOs to arbitrate is not needed and a design can use the
+  standard I2C multi-master rules.  Using GPIOs is generally useful in the case
+  where there is a device on the bus that has errata and/or bugs that makes
+  standard multimaster mode not feasible.
+
+  Note that this scheme works well enough but has some downsides:
+   * It is nonstandard (not using standard I2C multimaster)
+   * Having two masters on a bus in general makes it relatively hard to debug
+     problems (hard to tell if i2c issues were caused by one master, another,
+     or some device on the bus).
+
+  Algorithm:
+  All masters on the bus have a 'bus claim' line which is an output that the
+  others can see. These are all active low with pull-ups enabled.  We'll
+  describe these lines as:
+   * OUR_CLAIM: output from us signaling to other hosts that we want the bus
+   * THEIR_CLAIMS: output from others signaling that they want the bus
+
+  The basic algorithm is to assert your line when you want the bus, then make
+  sure that the other side doesn't want it also.  A detailed explanation is
+  best done with an example.
+
+  Let's say we want to claim the bus.  We:
+  1. Assert OUR_CLAIM.
+  2. Waits a little bit for the other sides to notice (slew time, say 10
+     microseconds).
+  3. Check THEIR_CLAIMS.  If none are asserted then the we have the bus and we
+     are done.
+  4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released.
+  5. If not, back off, release the claim and wait for a few more milliseconds.
+  6. Go back to 1 (until retry time has expired).
+
+properties:
+  compatible:
+    const: i2c-arb-gpio-challenge
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The I2C bus that this multiplexer's master-side port is connected to.
+
+  our-claim-gpios:
+    maxItems: 1
+    description:
+      The GPIO that we use to claim the bus.
+
+  slew-delay-us:
+    default: 10
+    description:
+      Time to wait for a GPIO to go high.
+
+  their-claim-gpios:
+    minItems: 1
+    maxItems: 8
+    description:
+      The GPIOs that the other sides use to claim the bus.  Note that some
+      implementations may only support a single other master.
+
+  wait-free-us:
+    default: 50000
+    description:
+      We'll give up after this many microseconds.
+
+  wait-retry-us:
+    default: 3000
+    description:
+      We'll attempt another claim after this many microseconds.
+
+  i2c-arb:
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description:
+      I2C arbitration bus node.
+
+required:
+  - compatible
+  - i2c-arb
+  - our-claim-gpios
+  - their-claim-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c-arbitrator {
+        compatible = "i2c-arb-gpio-challenge";
+        i2c-parent = <&i2c_4>;
+
+        our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>;
+        their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+        slew-delay-us = <10>;
+        wait-retry-us = <3000>;
+        wait-free-us = <50000>;
+
+        i2c-arb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            sbs-battery@b {
+                compatible = "sbs,sbs-battery";
+                reg = <0xb>;
+                sbs,poll-retry-count = <1>;
+            };
+
+            embedded-controller@1e {
+                compatible = "google,cros-ec-i2c";
+                reg = <0x1e>;
+                interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-parent = <&gpx1>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&ec_irq>;
+                wakeup-source;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-atr.yaml b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml
new file mode 100644
index 0000000000..1939ab339b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-atr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c address translator properties
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  An I2C Address Translator (ATR) is a device with an I2C slave parent
+  ("upstream") port and N I2C master child ("downstream") ports, and
+  forwards transactions from upstream to the appropriate downstream port
+  with a modified slave address. The address used on the parent bus is
+  called the "alias" and is (potentially) different from the physical
+  slave address of the child bus. Address translation is done by the
+  hardware.
+
+properties:
+  i2c-alias-pool:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      I2C alias pool is a pool of I2C addresses on the main I2C bus that can be
+      used to access the remote peripherals on the serializer's I2C bus. The
+      addresses must be available, not used by any other peripheral. Each
+      remote peripheral is assigned an alias from the pool, and transactions to
+      that address will be forwarded to the remote peripheral, with the address
+      translated to the remote peripheral's real address. This property is not
+      needed if there are no I2C addressable remote peripherals.
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
new file mode 100644
index 0000000000..7d53a2b795
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
@@ -0,0 +1,30 @@
+LSI Axxia I2C
+
+Required properties :
+- compatible : Must be "lsi,api2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- #address-cells : Must be <1>;
+- #size-cells : Must be <0>;
+- clock-names : Must contain "i2c".
+- clocks: Must contain an entry for each name in clock-names. See the common
+  clock bindings.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+  the default 100 kHz frequency will be used. As only Normal and Fast modes
+  are supported, possible values are 100000 and 400000.
+
+Example :
+
+i2c@2010084000 {
+	compatible = "lsi,api2c";
+	device_type = "i2c";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x20 0x10084000 0x00 0x1000>;
+	interrupts = <0 19 4>;
+	clocks = <&clk_per>;
+	clock-names = "i2c";
+	clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
new file mode 100644
index 0000000000..c143948b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cbus-gpio.txt
@@ -0,0 +1,27 @@
+Device tree bindings for i2c-cbus-gpio driver
+
+Required properties:
+	- compatible = "i2c-cbus-gpio";
+	- gpios: clk, dat, sel
+	- #address-cells = <1>;
+	- #size-cells = <0>;
+
+Optional properties:
+	- child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@0 {
+	compatible = "i2c-cbus-gpio";
+	gpios = <&gpio 66 0 /* clk */
+		 &gpio 65 0 /* dat */
+		 &gpio 64 0 /* sel */
+		>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	retu: retu@1 {
+		compatible = "nokia,retu";
+		reg = <0x1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
new file mode 100644
index 0000000000..6590501c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt
@@ -0,0 +1,43 @@
+* Texas Instruments Davinci/Keystone I2C
+
+This file provides information, what the device node for the
+davinci/keystone i2c interface contains.
+
+Required properties:
+- compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
+- reg : Offset and length of the register set for the device
+- clocks: I2C functional clock phandle.
+	  For 66AK2G this property should be set per binding,
+	  Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the I2C device id
+			value. This property is as per the binding,
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+Recommended properties :
+- interrupts : standard interrupt property.
+- clock-frequency : desired I2C bus clock frequency in Hz.
+- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC
+	registers. PFUNC registers allow to switch I2C pins to function as
+	GPIOs, so they can be toggled manually.
+
+Example (enbw_cmc board):
+	i2c@1c22000 {
+		compatible = "ti,davinci-i2c";
+		reg = <0x22000 0x1000>;
+		clock-frequency = <100000>;
+		interrupts = <15>;
+		interrupt-parent = <&intc>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dtt@48 {
+			compatible = "national,lm75";
+			reg = <0x48>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
new file mode 100644
index 0000000000..86b2e433a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
@@ -0,0 +1,135 @@
+Pinctrl-based I2C Bus DeMux
+
+This binding describes an I2C bus demultiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration using
+the pinctrl device tree bindings. This may be used to select one I2C IP core at
+runtime which may have a better feature set for a given task than another I2C
+IP core on the SoC. The most simple example is to fall back to GPIO bitbanging
+if your current runtime configuration hits an errata of the internal IP core.
+
+    +-------------------------------+
+    | SoC                           |
+    |                               |   +-----+  +-----+
+    |   +------------+              |   | dev |  | dev |
+    |   |I2C IP Core1|--\           |   +-----+  +-----+
+    |   +------------+   \-------+  |      |        |
+    |                    |Pinctrl|--|------+--------+
+    |   +------------+   +-------+  |
+    |   |I2C IP Core2|--/           |
+    |   +------------+              |
+    |                               |
+    +-------------------------------+
+
+Required properties:
+- compatible: "i2c-demux-pinctrl"
+- i2c-parent: List of phandles of I2C masters available for selection. The first
+	      one will be used as default.
+- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
+		parents.
+
+Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this
+directory.
+
+Example:
+
+Here is a snipplet for a bus to be demuxed. It contains various i2c clients for
+HDMI, so the bus is named "i2c-hdmi":
+
+	i2chdmi: i2c@8 {
+
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>;
+		i2c-bus-name = "i2c-hdmi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak4643: sound-codec@12 {
+			compatible = "asahi-kasei,ak4643";
+
+			#sound-dai-cells = <0>;
+			reg = <0x12>;
+		};
+
+		composite-in@20 {
+			compatible = "adi,adv7180";
+			reg = <0x20>;
+			remote = <&vin1>;
+
+			port {
+				adv7180: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&vin1ep0>;
+				};
+			};
+		};
+
+		hdmi@39 {
+			compatible = "adi,adv7511w";
+			reg = <0x39>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			adi,input-depth = <8>;
+			adi,input-colorspace = "rgb";
+			adi,input-clock = "1x";
+			adi,input-style = <1>;
+			adi,input-justification = "evenly";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					adv7511_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					adv7511_out: endpoint {
+						remote-endpoint = <&hdmi_con>;
+					};
+				};
+			};
+		};
+	};
+
+And for clarification, here are the snipplets for the i2c-parents:
+
+	gpioi2c: i2c@9 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio5 5 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+...
+
+&i2c2	{
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+...
+
+&iic2	{
+	pinctrl-0 = <&iic2_pins>;
+	pinctrl-names = "i2c-hdmi";
+
+	clock-frequency = <100000>;
+};
+
+Please note:
+
+- pinctrl properties for the parent I2C controllers need a pinctrl state
+  with the same name as i2c-bus-name, not "default"!
+
+- the i2c masters must have their status "disabled". This driver will
+  enable them at runtime when needed.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
new file mode 100644
index 0000000000..457a098d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt
@@ -0,0 +1,25 @@
+Conexant Digicolor I2C controller
+
+Required properties:
+ - compatible: must be "cnxt,cx92755-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+  absence of this property the default value is used (100 kHz).
+
+Example:
+
+	i2c: i2c@f0000120 {
+		compatible = "cnxt,cx92755-i2c";
+		reg = <0xf0000120 0x10>;
+		interrupts = <28>;
+		clocks = <&main_clk>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 0000000000..3e52a0db6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+  In case the HSI2C controller is encapsulated within USI block (it's the case
+  e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to
+  define USI node in device tree file, choosing "i2c" configuration. Please see
+  Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov9-hsi2c
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c@12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hsi2c_2: i2c@138c0000 {
+        compatible = "samsung,exynosautov9-hsi2c";
+        reg = <0x138c0000 0xc0>;
+        interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+                 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+        clock-names = "hsi2c", "hsi2c_pclk";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
new file mode 100644
index 0000000000..b1be2ceb7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
@@ -0,0 +1,40 @@
+Device-tree bindings for FSI-attached I2C master and busses
+-----------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,i2c-fsi";
+ - reg = < address size >;		: The FSI CFAM address and address
+					  space size.
+ - #address-cells = <1>;		: Number of address cells in child
+					  nodes.
+ - #size-cells = <0>;			: Number of size cells in child nodes.
+ - child nodes				: Nodes to describe busses off the I2C
+					  master.
+
+Child node required properties:
+ - reg = < port number >		: The port number on the I2C master.
+
+Child node optional properties:
+ - child nodes				: Nodes to describe devices on the I2C
+					  bus.
+
+Examples:
+
+    i2c@1800 {
+        compatible = "ibm,i2c-fsi";
+        reg = < 0x1800 0x400 >;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-bus@0 {
+            reg = <0>;
+        };
+
+        i2c-bus@1 {
+            reg = <1>;
+
+            eeprom@50 {
+                compatible = "vendor,dev-name";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
new file mode 100644
index 0000000000..0cdc3e890d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c gate properties
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  An i2c gate is useful to e.g. reduce the digital noise for RF tuners connected
+  to the i2c bus. Gates are similar to arbitrators in that you need to perform
+  some kind of operation to access the i2c bus past the arbitrator/gate, but
+  there are no competing masters to consider for gates and therefore there is
+  no arbitration happening for gates.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+properties:
+  $nodename:
+    const: i2c-gate
+
+additionalProperties: true
+
+examples:
+  - |
+    i2c-gate {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak8975@c {
+            compatible = "asahi-kasei,ak8975";
+            reg = <0x0c>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
new file mode 100644
index 0000000000..afd4925c2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO bitbanged I2C
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: i2c-gpio
+
+  sda-gpios:
+    description:
+      gpio used for the sda signal, this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is by definition
+      open drain.
+    maxItems: 1
+
+  scl-gpios:
+    description:
+      gpio used for the scl signal, this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is by definition
+      open drain.
+    maxItems: 1
+
+  i2c-gpio,sda-output-only:
+    description: sda as output only
+    type: boolean
+
+  i2c-gpio,scl-output-only:
+    description: scl as output only
+    type: boolean
+
+  i2c-gpio,delay-us:
+    description: delay between GPIO operations (may depend on each platform)
+
+  i2c-gpio,timeout-ms:
+    description: timeout to get data
+
+  # Deprecated properties, do not use in new device tree sources:
+  gpios:
+    minItems: 2
+    maxItems: 2
+    description: sda and scl gpio, alternative for {sda,scl}-gpios
+
+  i2c-gpio,sda-open-drain:
+    type: boolean
+    deprecated: true
+    description: this means that something outside of our control has put
+      the GPIO line used for SDA into open drain mode, and that something is
+      not the GPIO chip. It is essentially an inconsistency flag.
+
+  i2c-gpio,scl-open-drain:
+    type: boolean
+    deprecated: true
+    description: this means that something outside of our control has put the
+      GPIO line used for SCL into open drain mode, and that something is not
+      the GPIO chip. It is essentially an inconsistency flag.
+
+  i2c-gpio,sda-has-no-pullup:
+    type: boolean
+    description: sda is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,sda-open-drain.
+
+  i2c-gpio,scl-has-no-pullup:
+    type: boolean
+    description: scl is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,scl-open-drain.
+
+dependencies:
+  i2c-gpio,sda-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,sda-open-drain
+  i2c-gpio,scl-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,scl-open-drain
+
+required:
+  - compatible
+  - sda-gpios
+  - scl-gpios
+
+unevaluatedProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
new file mode 100644
index 0000000000..f98b37401e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
@@ -0,0 +1,24 @@
+I2C for Hisilicon hix5hd2 chipset platform
+
+Required properties:
+- compatible: Must be "hisilicon,hix5hd2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- Child nodes conforming to i2c bus binding
+
+Examples:
+I2C0@f8b10000 {
+	compatible = "hisilicon,hix5hd2-i2c";
+	reg = <0xf8b10000 0x1000>;
+	interrupts = <0 38 4>;
+	clocks = <&clock HIX5HD2_I2C0_RST>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt
new file mode 100644
index 0000000000..b6461602dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-img-scb.txt
@@ -0,0 +1,26 @@
+IMG Serial Control Bus (SCB) I2C Controller
+
+Required Properties:
+- compatible: "img,scb-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: Interrupt number used by the controller
+- clocks : Should contain a clock specifier for each entry in clock-names
+- clock-names : Should contain the following entries:
+                "scb", for the SCB core clock.
+                "sys", for the system clock.
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Example:
+
+i2c@18100000 {
+	compatible = "img,scb-i2c";
+	reg = <0x18100000 0x200>;
+	interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&i2c0_clk>, <&system_clk>;
+	clock-names = "scb", "sys";
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
new file mode 100644
index 0000000000..4656f5112b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-imx-lpi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Low Power Inter IC (LPI2C) for i.MX
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7ulp-lpi2c
+      - items:
+          - enum:
+              - fsl,imx8qxp-lpi2c
+              - fsl,imx8dxl-lpi2c
+              - fsl,imx8qm-lpi2c
+              - fsl,imx8ulp-lpi2c
+              - fsl,imx93-lpi2c
+          - const: fsl,imx7ulp-lpi2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+  clock-frequency: true
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  clocks:
+    maxItems: 2
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@40a50000 {
+        compatible = "fsl,imx7ulp-lpi2c";
+        reg = <0x40A50000 0x10000>;
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX7ULP_CLK_LPI2C7>,
+                 <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
new file mode 100644
index 0000000000..85ee1282d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-i2c
+      - const: fsl,imx21-i2c
+      - const: fsl,vf610-i2c
+      - items:
+          - enum:
+              - fsl,ls1012a-i2c
+              - fsl,ls1021a-i2c
+              - fsl,ls1028a-i2c
+              - fsl,ls1043a-i2c
+              - fsl,ls1046a-i2c
+              - fsl,ls1088a-i2c
+              - fsl,ls208xa-i2c
+              - fsl,lx2160a-i2c
+          - const: fsl,vf610-i2c
+      - items:
+          - const: fsl,imx35-i2c
+          - const: fsl,imx1-i2c
+      - items:
+          - const: fsl,imx7d-i2c
+          - const: fsl,imx21-i2c
+      - items:
+          - enum:
+              - fsl,imx25-i2c
+              - fsl,imx27-i2c
+              - fsl,imx31-i2c
+              - fsl,imx50-i2c
+              - fsl,imx51-i2c
+              - fsl,imx53-i2c
+              - fsl,imx6q-i2c
+              - fsl,imx6sl-i2c
+              - fsl,imx6sx-i2c
+              - fsl,imx6sll-i2c
+              - fsl,imx6ul-i2c
+              - fsl,imx7s-i2c
+              - fsl,imx8mq-i2c
+              - fsl,imx8mm-i2c
+              - fsl,imx8mn-i2c
+              - fsl,imx8mp-i2c
+          - const: fsl,imx21-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  clock-frequency:
+    minimum: 1
+    default: 100000
+    maximum: 400000
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  sda-gpios:
+    maxItems: 1
+
+  scl-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@83fc4000 {
+        compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
+        reg = <0x83fc4000 0x4000>;
+        interrupts = <63>;
+        clocks = <&clks IMX5_CLK_I2C2_GATE>;
+    };
+
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    i2c@40066000 {
+        compatible = "fsl,vf610-i2c";
+        reg = <0x40066000 0x1000>;
+        interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks VF610_CLK_I2C0>;
+        clock-names = "ipg";
+        dmas = <&edma0 0 50>,
+               <&edma0 0 51>;
+        dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
new file mode 100644
index 0000000000..dcc8390e0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
@@ -0,0 +1,20 @@
+i2c Controller on XScale platforms such as IOP3xx and IXP4xx
+
+Required properties:
+- compatible : Must be one of
+  "intel,iop3xx-i2c"
+  "intel,ixp4xx-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@c8011000 {
+	compatible = "intel,ixp4xx-i2c";
+	reg = <0xc8011000 0x18>;
+	interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
new file mode 100644
index 0000000000..4101aa621a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
@@ -0,0 +1,33 @@
+NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+Required properties:
+ - compatible: must be "nxp,lpc1788-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+  absence of this property the default value is used (100 kHz).
+
+Example:
+i2c0: i2c@400a1000 {
+	compatible = "nxp,lpc1788-i2c";
+	reg = <0x400a1000 0x1000>;
+	interrupts = <18>;
+	clocks = <&ccu1 CLK_APB1_I2C0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	lm75@48 {
+		compatible = "nxp,lm75";
+		reg = <0x48>;
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
new file mode 100644
index 0000000000..70fb69b923
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mpc5200-i2c
+              - fsl,mpc5200-i2c
+              - fsl,mpc5121-i2c
+              - fsl,mpc8313-i2c
+              - fsl,mpc8543-i2c
+              - fsl,mpc8544-i2c
+          - const: fsl-i2c
+      - items:
+          - const: fsl,mpc5200b-i2c
+          - const: fsl,mpc5200-i2c
+          - const: fsl-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,preserve-clocking:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      if defined, the clock settings from the bootloader are
+      preserved (not touched)
+
+  fsl,timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description: |
+      I2C bus timeout in microseconds
+
+  fsl,i2c-erratum-a004447:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicates the presence of QorIQ erratum A-004447, which
+      says that the standard i2c recovery scheme mechanism does
+      not work and an alternate implementation is needed.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* MPC5121 based board */
+    i2c@1740 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+        reg = <0x1740 0x20>;
+        interrupts = <11 0x8>;
+        interrupt-parent = <&ipic>;
+        clock-frequency = <100000>;
+    };
+
+  - |
+    /* MPC5200B based board */
+    i2c@3d00 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c";
+        reg = <0x3d00 0x40>;
+        interrupts = <2 15 0>;
+        interrupt-parent = <&mpc5200_pic>;
+        fsl,preserve-clocking;
+    };
+
+  - |
+    /* MPC8544 base board */
+    i2c@3100 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+        reg = <0x3100 0x100>;
+        interrupts = <43 2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <400000>;
+        i2c-scl-clk-low-timeout-us = <10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
new file mode 100644
index 0000000000..fda0467cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in
+  various MediaTek SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Qii Wang <qii.wang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt2712-i2c
+      - const: mediatek,mt6577-i2c
+      - const: mediatek,mt6589-i2c
+      - const: mediatek,mt7622-i2c
+      - const: mediatek,mt7981-i2c
+      - const: mediatek,mt7986-i2c
+      - const: mediatek,mt8168-i2c
+      - const: mediatek,mt8173-i2c
+      - const: mediatek,mt8183-i2c
+      - const: mediatek,mt8186-i2c
+      - const: mediatek,mt8188-i2c
+      - const: mediatek,mt8192-i2c
+      - items:
+          - enum:
+              - mediatek,mt7629-i2c
+              - mediatek,mt8516-i2c
+          - const: mediatek,mt2712-i2c
+      - items:
+          - enum:
+              - mediatek,mt2701-i2c
+              - mediatek,mt6797-i2c
+              - mediatek,mt7623-i2c
+          - const: mediatek,mt6577-i2c
+      - items:
+          - enum:
+              - mediatek,mt8365-i2c
+          - const: mediatek,mt8168-i2c
+      - items:
+          - enum:
+              - mediatek,mt6795-i2c
+          - const: mediatek,mt8173-i2c
+      - items:
+          - enum:
+              - mediatek,mt8195-i2c
+          - const: mediatek,mt8192-i2c
+
+  reg:
+    items:
+      - description: Physical base address
+      - description: DMA base address
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Main clock for I2C bus
+      - description: Clock for I2C via DMA
+      - description: Bus arbitrator clock
+      - description: Clock for I2C from PMIC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: main
+      - const: dma
+      - const: arb
+      - const: pmic
+
+  clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency divider of clock source in I2C module
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  mediatek,have-pmic:
+    description: Platform controls I2C from PMIC side
+    type: boolean
+
+  mediatek,use-push-pull:
+    description: Use push-pull mode I/O config
+    type: boolean
+
+  vbus-supply:
+    description: Phandle to the regulator providing power to SCL/SDA
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-div
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1100d000 {
+      compatible = "mediatek,mt6577-i2c";
+      reg = <0x1100d000 0x70>, <0x11000300 0x80>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&i2c0_ck>, <&ap_dma_ck>;
+      clock-names = "main", "dma";
+      clock-div = <16>;
+      clock-frequency = <400000>;
+      mediatek,have-pmic;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
new file mode 100644
index 0000000000..f34cc7ad5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals.
+
+                                  +-----+  +-----+
+                                  | dev |  | dev |
+    +------------+                +-----+  +-----+
+    | SoC        |                   |        |
+    |            |          /--------+--------+
+    |   +------+ |  +------+    child bus A, on GPIO value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
+    |            |     |    \----------+--------+--------+
+    |   +------+ |     |               |        |        |
+    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
+    |   +------+ |                  | dev |  | dev |  | dev |
+    +------------+                  +-----+  +-----+  +-----+
+
+  For each I2C child node, an I2C child bus will be created. They will be numbered based on their
+  order in the device tree.
+
+  Whenever an access is made to a device on a child bus, the value set in the relevant node's reg
+  property will be output using the list of GPIOs, the first in the list holding the least-
+  significant value.
+
+  If an idle state is defined, using the idle-state (optional) property, whenever an access is not
+  being made to a device on a child bus, the GPIOs will be set according to the idle value.
+
+  If an idle state is not defined, the most recently used value will be left programmed into
+  hardware whenever no access is being made to a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-gpio
+
+  i2c-parent:
+    description: phandle of the I2C bus that this multiplexer's master-side port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  mux-gpios:
+    description: list of GPIOs used to control the muxer
+    minItems: 1
+    maxItems: 4  # Should be enough
+
+  idle-state:
+    description: Value to set the muxer to when idle. When no value is given, it defaults to the
+      last value used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-gpios
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>;
+      i2c-parent = <&i2c1>;
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssd1307: oled@3c {
+          compatible = "solomon,ssd1307fb-i2c";
+          reg = <0x3c>;
+          pwms = <&pwm 4 3000>;
+          reset-gpios = <&gpio2 7 1>;
+        };
+      };
+
+      i2c@3 {
+        reg = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pca9555: pca9555@20 {
+          compatible = "nxp,pca9555";
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x20>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
new file mode 100644
index 0000000000..b6af924dee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: General Purpose I2C Bus Mux
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  This binding describes an I2C bus multiplexer that uses a mux controller
+  from the mux subsystem to route the I2C signals.
+
+                                    .-----.  .-----.
+                                    | dev |  | dev |
+      .------------.                '-----'  '-----'
+      | SoC        |                   |        |
+      |            |          .--------+--------'
+      |   .------. |  .------+    child bus A, on MUX value set to 0
+      |   | I2C  |-|--| Mux  |
+      |   '------' |  '--+---+    child bus B, on MUX value set to 1
+      |   .------. |     |    '----------+--------+--------.
+      |   | MUX- | |     |               |        |        |
+      |   | Ctrl |-|-----+            .-----.  .-----.  .-----.
+      |   '------' |                  | dev |  | dev |  | dev |
+      '------------'                  '-----'  '-----'  '-----'
+
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    const: i2c-mux
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the I2C bus that this multiplexer's master-side port is
+      connected to.
+
+  mux-controls:
+    maxItems: 1
+    description:
+      The mux-controller states are the I2C sub-bus numbers.
+
+  mux-locked:
+    type: boolean
+    description: |
+      Explicitly allow unrelated I2C transactions on the parent I2C adapter at
+      these times:
+       - during setup of the multiplexer
+       - between setup of the multiplexer and the child bus I2C transaction
+       - between the child bus I2C transaction and releasing of the multiplexer
+       - during releasing of the multiplexer
+
+      However, I2C transactions to devices behind all I2C multiplexers connected
+      to the same parent adapter that this multiplexer is connected to are blocked
+      for the full duration of the complete multiplexed I2C transaction (i.e.
+      including the times covered by the above list).
+      If mux-locked is not present, the multiplexer is assumed to be parent-locked.
+      This means that no unrelated I2C transactions are allowed on the parent I2C
+      adapter for the complete multiplexed I2C transaction.
+      The properties of mux-locked and parent-locked multiplexers are discussed
+      in more detail in Documentation/i2c/i2c-topology.rst.
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+                    <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        mux-locked;
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@20 {
+                compatible = "nxp,pca9555";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0x20>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@20 {
+                compatible = "nxp,pca9555";
+                gpio-controller;
+                #gpio-cells = <2>;
+                reg = <0x20>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
new file mode 100644
index 0000000000..29c4550c97
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
@@ -0,0 +1,61 @@
+* Linear Technology / Analog Devices I2C bus switch
+
+Required Properties:
+
+  - compatible: Must contain one of the following.
+    "lltc,ltc4305", "lltc,ltc4306"
+  - reg: The I2C address of the device.
+
+  The following required properties are defined externally:
+
+  - Standard I2C mux properties. See i2c-mux.yaml in this directory.
+  - I2C child bus nodes. See i2c-mux.yaml in this directory.
+
+Optional Properties:
+
+  - enable-gpios: Reference to the GPIO connected to the enable input.
+  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+    children in idle state. This is necessary for example, if there are several
+    multiplexers on the bus and the devices behind them use same I2C addresses.
+  - gpio-controller: Marks the device node as a GPIO Controller.
+  - #gpio-cells: Should be two.  The first cell is the pin number and
+	the second cell is used to specify flags.
+	See ../gpio/gpio.txt for more information.
+  - ltc,downstream-accelerators-enable: Enables the rise time accelerators
+	on the downstream port.
+  - ltc,upstream-accelerators-enable: Enables the rise time accelerators
+	on the upstream port.
+
+Example:
+
+	ltc4306: i2c-mux@4a {
+		compatible = "lltc,ltc4306";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x4a>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
new file mode 100644
index 0000000000..2d7bb998b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA954x I2C and compatible bus switches
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The NXP PCA954x and compatible devices are I2C bus
+  multiplexer/switches that share the same functionality
+  and register layout.
+  The devices usually have 4 or 8 child buses, which are
+  attached to the parent bus by using the SMBus "Send Byte"
+  command.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - maxim,max7356
+          - maxim,max7357
+          - maxim,max7358
+          - maxim,max7367
+          - maxim,max7368
+          - maxim,max7369
+          - nxp,pca9540
+          - nxp,pca9542
+          - nxp,pca9543
+          - nxp,pca9544
+          - nxp,pca9545
+          - nxp,pca9546
+          - nxp,pca9547
+          - nxp,pca9548
+          - nxp,pca9846
+          - nxp,pca9847
+          - nxp,pca9848
+          - nxp,pca9849
+      - items:
+          - const: nxp,pca9646
+          - const: nxp,pca9546
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  reset-gpios:
+    maxItems: 1
+
+  i2c-mux-idle-disconnect:
+    type: boolean
+    description: Forces mux to disconnect all children in idle state. This is
+      necessary for example, if there are several multiplexers on the bus and
+      the devices behind them use same I2C addresses.
+
+  idle-state:
+    description: if present, overrides i2c-mux-idle-disconnect
+    $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
+
+  vdd-supply:
+    description: A voltage regulator supplying power to the chip. On PCA9846
+      the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7367
+                - maxim,max7369
+                - nxp,pca9542
+                - nxp,pca9543
+                - nxp,pca9544
+                - nxp,pca9545
+    then:
+      properties:
+        interrupts: false
+        "#interrupt-cells": false
+        interrupt-controller: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-mux@74 {
+            compatible = "nxp,pca9545";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x74>;
+
+            vdd-supply = <&p3v3>;
+
+            interrupt-parent = <&ipic>;
+            interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            i2c@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <2>;
+
+                eeprom@54 {
+                    compatible = "atmel,24c08";
+                    reg = <0x54>;
+                };
+            };
+
+            i2c@4 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <4>;
+
+                rtc@51 {
+                    compatible = "nxp,pcf8563";
+                    reg = <0x51>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 0000000000..2e3d555eb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
new file mode 100644
index 0000000000..b9d9755e41
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt
@@ -0,0 +1,74 @@
+Register-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses a single register
+to route the I2C signals.
+
+Required properties:
+- compatible: i2c-mux-reg
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+  port is connected to.
+* Standard I2C mux properties. See i2c-mux.yaml in this directory.
+* I2C child bus nodes. See i2c-mux.yaml in this directory.
+
+Optional properties:
+- reg: this pair of <offset size> specifies the register to control the mux.
+  The <offset size> depends on its parent node. It can be any memory-mapped
+  address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the
+  resource of this device will be used.
+- little-endian: The existence indicates the register is in little endian.
+- big-endian: The existence indicates the register is in big endian.
+  If both little-endian and big-endian are omitted, the endianness of the
+  CPU will be used.
+- write-only: The existence indicates the register is write-only.
+- idle-state: value to set the muxer to when idle. When no value is
+  given, it defaults to the last value used.
+
+Whenever an access is made to a device on a child bus, the value set
+in the relevant node's reg property will be output to the register.
+
+If an idle state is defined, using the idle-state (optional) property,
+whenever an access is not being made to a device on a child bus, the
+register will be set according to the idle value.
+
+If an idle state is not defined, the most recently used value will be
+left programmed into the register.
+
+Example of a mux on PCIe card, the host is a powerpc SoC (big endian):
+
+	i2c-mux {
+		/* the <offset size> depends on the address translation
+		 * of the parent device. If omitted, device resource
+		 * will be used instead. The size is to determine
+		 * whether iowrite32, iowrite16, or iowrite8 will be used.
+		 */
+		reg = <0x6028 0x4>;
+		little-endian;		/* little endian register on PCIe */
+		compatible = "i2c-mux-reg";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c1>;
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			si5338: clock-generator@70 {
+				compatible = "silabs,si5338";
+				reg = <0x70>;
+				/* other stuff */
+			};
+		};
+
+		i2c@1 {
+			/* data is written using iowrite32 */
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			si5338: clock-generator@70 {
+				compatible = "silabs,si5338";
+				reg = <0x70>;
+				/* other stuff */
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
new file mode 100644
index 0000000000..24cac36037
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c bus multiplexer/switch properties.
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  An i2c bus multiplexer/switch will have several child busses that are numbered
+  uniquely in a device dependent manner.  The nodes for an i2c bus
+  multiplexer/switch will have one child node for each child bus.
+
+  For i2c multiplexers/switches that have child nodes that are a mixture of both
+  i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for
+  populating the i2c child busses.  If an 'i2c-mux' subnode is present, only
+  subnodes of this will be considered as i2c child busses.
+
+properties:
+  $nodename:
+    pattern: '^(i2c-?)?mux'
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^i2c@[0-9a-f]+$':
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The mux selector sub-bus number for the child I2C bus.
+        maxItems: 1
+
+additionalProperties: true
+
+examples:
+  - |
+    /*
+     * An NXP pca9548 8 channel I2C multiplexer at address 0x70
+     * with two NXP pca8574 GPIO expanders attached, one each to
+     * ports 3 and 4.
+     */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-mux@70 {
+            compatible = "nxp,pca9548";
+            reg = <0x70>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            i2c@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <3>;
+
+                gpio@20 {
+                    compatible = "nxp,pca9555";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    reg = <0x20>;
+                };
+            };
+            i2c@4 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <4>;
+
+                gpio@20 {
+                    compatible = "nxp,pca9555";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    reg = <0x20>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
new file mode 100644
index 0000000000..171a414072
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mxs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Inter IC (I2C) Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-i2c
+      - fsl,imx28-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@80058000 {
+        compatible = "fsl,imx28-i2c";
+        reg = <0x80058000 2000>;
+        interrupts = <111>;
+        clock-frequency = <100000>;
+        dmas = <&dma_apbx 6>;
+        dma-names = "rx-tx";
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-octeon.txt b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
new file mode 100644
index 0000000000..872d485dff
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-octeon.txt
@@ -0,0 +1,40 @@
+* Two Wire Serial Interface (TWSI) / I2C
+
+- compatible: "cavium,octeon-3860-twsi"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+  or
+
+  compatible: "cavium,octeon-7890-twsi"
+
+  Compatibility with cn78XX SOCs.
+
+- reg: The base address of the TWSI/I2C bus controller register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>.  I2C addresses have no size component.
+
+- interrupts: A single interrupt specifier.
+
+- clock-frequency: The I2C bus clock rate in Hz.
+
+Example:
+	twsi0: i2c@1180000001000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cavium,octeon-3860-twsi";
+		reg = <0x11800 0x00001000 0x0 0x200>;
+		interrupts = <0 45>;
+		clock-frequency = <100000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1337";
+			reg = <0x68>;
+		};
+		tmp@4c {
+			compatible = "ti,tmp421";
+			reg = <0x4c>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-opal.txt b/Documentation/devicetree/bindings/i2c/i2c-opal.txt
new file mode 100644
index 0000000000..12bc61465e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-opal.txt
@@ -0,0 +1,37 @@
+Device-tree bindings for I2C OPAL driver
+----------------------------------------
+
+Most of the device node and properties layout is specific to the firmware and
+used by the firmware itself for configuring the port. From the linux
+perspective, the properties of use are "ibm,port-name" and "ibm,opal-id".
+
+Required properties:
+
+- reg: Port-id within a given master
+- compatible: must be "ibm,opal-i2c"
+- ibm,opal-id: Refers to a specific bus and used to identify it when calling
+	       the relevant OPAL functions.
+- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for
+		 linux, used by the FW though.
+
+Optional properties:
+- ibm,port-name: Firmware provides this name that uniquely identifies the i2c
+		 port.
+
+The node contains a number of other properties that are used by the FW itself
+and depend on the specific hardware implementation. The example below depicts
+a P8 on-chip bus.
+
+Example:
+
+i2c-bus@0 {
+	reg = <0x0>;
+	bus-frequency = <0x61a80>;
+	compatible = "ibm,power8-i2c-port", "ibm,opal-i2c";
+	ibm,opal-id = <0x1>;
+	ibm,port-name = "p8_00000000_e1p0";
+	#address-cells = <0x1>;
+	phandle = <0x10000006>;
+	#size-cells = <0x0>;
+	linux,phandle = <0x10000006>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-owl.yaml b/Documentation/devicetree/bindings/i2c/i2c-owl.yaml
new file mode 100644
index 0000000000..d96908badf
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-owl.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-owl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl I2C Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  This I2C controller is found in the Actions Semi Owl SoCs:
+  S500, S700 and S900.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-i2c # Actions Semi S500 compatible SoCs
+      - actions,s700-i2c # Actions Semi S700 compatible SoCs
+      - actions,s900-i2c # Actions Semi S900 compatible SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: Phandle of the clock feeding the I2C controller.
+    minItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/actions,s900-cmu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@e0170000 {
+        compatible = "actions,s900-i2c";
+        reg = <0xe0170000 0x1000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu CLK_I2C0>;
+        clock-frequency = <100000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
new file mode 100644
index 0000000000..73a693d66e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -0,0 +1,27 @@
+* NXP PCA PCA9564/PCA9665 I2C controller
+
+The PCA9564/PCA9665 serves as an interface between most standard
+parallel-bus microcontrollers/microprocessors and the serial I2C-bus
+and allows the parallel bus system to communicate bi-directionally
+with the I2C-bus.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : one of "nxp,pca9564" or "nxp,pca9665"
+
+Optional properties
+ - interrupts : the interrupt number
+ - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
+   is active low, it should be marked GPIO_ACTIVE_LOW.
+ - clock-frequency : I2C bus frequency.
+
+Example:
+	i2c0: i2c@80000 {
+		compatible = "nxp,pca9564";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x80000 0x4>;
+		reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
new file mode 100644
index 0000000000..2a59006cf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
@@ -0,0 +1,34 @@
+* NXP PNX I2C Controller
+
+Required properties:
+
+ - reg: Offset and length of the register set for the device
+ - compatible: should be "nxp,pnx-i2c"
+ - interrupts: configure one interrupt line
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+
+Optional properties:
+
+ - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
+
+Examples:
+
+	i2c1: i2c@400a0000 {
+		compatible = "nxp,pnx-i2c";
+		reg = <0x400a0000 0x100>;
+		interrupt-parent = <&mic>;
+		interrupts = <51 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c2: i2c@400a8000 {
+		compatible = "nxp,pnx-i2c";
+		reg = <0x400a8000 0x100>;
+		interrupt-parent = <&mic>;
+		interrupts = <50 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
new file mode 100644
index 0000000000..1ff6f8487a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa-pci-ce4100.txt
@@ -0,0 +1,93 @@
+CE4100 I2C
+----------
+
+CE4100 has one PCI device which is described as the I2C-Controller. This
+PCI device has three PCI-bars, each bar contains a complete I2C
+controller. So we have a total of three independent I2C-Controllers
+which share only an interrupt line.
+The driver is probed via the PCI-ID and is gathering the information of
+attached devices from the devices tree.
+Grant Likely recommended to use the ranges property to map the PCI-Bar
+number to its physical address and to use this to find the child nodes
+of the specific I2C controller. This were his exact words:
+
+       Here's where the magic happens.  Each entry in
+       ranges describes how the parent pci address space
+       (middle group of 3) is translated to the local
+       address space (first group of 2) and the size of
+       each range (last cell).  In this particular case,
+       the first cell of the local address is chosen to be
+       1:1 mapped to the BARs, and the second is the
+       offset from be base of the BAR (which would be
+       non-zero if you had 2 or more devices mapped off
+       the same BAR)
+
+       ranges allows the address mapping to be described
+       in a way that the OS can interpret without
+       requiring custom device driver code.
+
+This is an example which is used on FalconFalls:
+------------------------------------------------
+	i2c-controller@b,2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "pci8086,2e68.2",
+				"pci8086,2e68",
+				"pciclass,ff0000",
+				"pciclass,ff00";
+
+		reg = <0x15a00 0x0 0x0 0x0 0x0>;
+		interrupts = <16 1>;
+
+		/* as described by Grant, the first number in the group of
+		* three is the bar number followed by the 64bit bar address
+		* followed by size of the mapping. The bar address
+		* requires also a valid translation in parents ranges
+		* property.
+		*/
+		ranges = <0 0   0x02000000 0 0xdffe0500 0x100
+			  1 0   0x02000000 0 0xdffe0600 0x100
+			  2 0   0x02000000 0 0xdffe0700 0x100>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,ce4100-i2c-controller";
+
+			/* The first number in the reg property is the
+			* number of the bar
+			*/
+			reg = <0 0 0x100>;
+
+			/* This I2C controller has no devices */
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,ce4100-i2c-controller";
+			reg = <1 0 0x100>;
+
+			/* This I2C controller has one gpio controller */
+			gpio@26 {
+				#gpio-cells = <2>;
+				compatible = "nxp,pcf8575";
+				reg = <0x26>;
+				gpio-controller;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "intel,ce4100-i2c-controller";
+			reg = <2 0 0x100>;
+
+			gpio@26 {
+				#gpio-cells = <2>;
+				compatible = "nxp,pcf8575";
+				reg = <0x26>;
+				gpio-controller;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
new file mode 100644
index 0000000000..31386a8d76
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP I2C controller
+
+maintainers:
+  - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      not:
+        required:
+          - mrvl,i2c-polling
+    then:
+      required:
+        - interrupts
+
+properties:
+  compatible:
+    enum:
+      - mrvl,mmp-twsi
+      - mrvl,pxa-i2c
+      - marvell,armada-3700-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  resets:
+    minItems: 1
+
+  mrvl,i2c-polling:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Disable interrupt of i2c controller. Polling status register of i2c
+      controller instead.
+
+  mrvl,i2c-fast-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable fast mode of i2c controller.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    i2c@d4011000 {
+        compatible = "mrvl,mmp-twsi";
+        reg = <0xd4011000 0x1000>;
+        interrupts = <7>;
+        clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+        mrvl,i2c-fast-mode;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
new file mode 100644
index 0000000000..82b9d66822
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-rk3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3xxx I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in Rockchip
+  RK3xxx SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rv1108-i2c
+      - const: rockchip,rk3066-i2c
+      - const: rockchip,rk3188-i2c
+      - const: rockchip,rk3228-i2c
+      - const: rockchip,rk3288-i2c
+      - const: rockchip,rk3399-i2c
+      - items:
+          - enum:
+              - rockchip,rk3036-i2c
+              - rockchip,rk3128-i2c
+              - rockchip,rk3368-i2c
+          - const: rockchip,rk3288-i2c
+      - items:
+          - enum:
+              - rockchip,px30-i2c
+              - rockchip,rk3308-i2c
+              - rockchip,rk3328-i2c
+              - rockchip,rk3568-i2c
+              - rockchip,rk3588-i2c
+              - rockchip,rv1126-i2c
+          - const: rockchip,rk3399-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description:
+          For older hardware (rk3066, rk3188, rk3228, rk3288)
+          there is one clock that is used both to derive the functional clock
+          for the device and as the bus clock.
+          For newer hardware (rk3399) this clock is used to derive
+          the functional clock
+      - description:
+          For newer hardware (rk3399) this is the bus clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: i2c
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Required on RK3066, RK3188 the phandle of the syscon node for
+      the general register file (GRF)
+      On those SoCs an alias with the correct I2C bus ID
+      (bit offset in the GRF) is also required.
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  i2c-scl-rising-time-ns:
+    default: 1000
+    description:
+      Number of nanoseconds the SCL signal takes to rise
+      (t(r) in I2C specification). If not specified this is assumed to be
+      the maximum the specification allows(1000 ns for Standard-mode,
+      300 ns for Fast-mode) which might cause slightly slower communication.
+
+  i2c-scl-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SCL signal takes to fall
+      (t(f) in the I2C specification). If not specified this is assumed to
+      be the maximum the specification allows (300 ns) which might cause
+      slightly slower communication.
+
+  i2c-sda-falling-time-ns:
+    default: 300
+    description:
+      Number of nanoseconds the SDA signal takes to fall
+      (t(f) in the I2C specification). If not specified we will use the SCL
+      value since they are the same in nearly all cases.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3066-i2c
+          - rockchip,rk3188-i2c
+
+then:
+  required:
+    - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0: i2c@2002d000 {
+      compatible = "rockchip,rk3188-i2c";
+      reg = <0x2002d000 0x1000>;
+      interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru PCLK_I2C0>;
+      clock-names = "i2c";
+      rockchip,grf = <&grf>;
+      i2c-scl-falling-time-ns = <100>;
+      i2c-scl-rising-time-ns = <800>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
new file mode 100644
index 0000000000..7b6b3b8d0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
@@ -0,0 +1,31 @@
+I2C for Spreadtrum platforms
+
+Required properties:
+- compatible: Should be "sprd,sc9860-i2c".
+- reg: Specify the physical base address of the controller and length
+  of memory mapped region.
+- interrupts: Should contain I2C interrupt.
+- clock-names: Should contain following entries:
+  "i2c" for I2C clock,
+  "source" for I2C source (parent) clock,
+  "enable" for I2C module enable clock.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+- clock-frequency: Contains desired I2C bus clock frequency in Hz.
+- #address-cells: Should be 1 to describe address cells for I2C device address.
+- #size-cells: Should be 0 means no size cell for I2C device address.
+
+Optional properties:
+- Child nodes conforming to I2C bus binding
+
+Examples:
+i2c0: i2c@70500000 {
+	compatible = "sprd,sc9860-i2c";
+	reg = <0 0x70500000 0 0x1000>;
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "i2c", "source", "enable";
+	clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
new file mode 100644
index 0000000000..7d87ed8553
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-virtio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio I2C Adapter
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - $ref: /schemas/virtio/virtio-device.yaml#
+
+description:
+  Virtio I2C device, see /schemas/virtio/virtio-device.yaml for more details.
+
+properties:
+  $nodename:
+    const: i2c
+
+  compatible:
+    const: virtio,device22
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        i2c {
+            compatible = "virtio,device22";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            light-sensor@20 {
+                compatible = "dynaimage,al3320a";
+                reg = <0x20>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
new file mode 100644
index 0000000000..94a425eaa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
@@ -0,0 +1,24 @@
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+	Valid values are 100000 and 400000.
+	Default to 100000 if not specified, or invalid value.
+
+Example :
+
+	i2c_0: i2c@d8280000 {
+		compatible = "wm,wm8505-i2c";
+		reg = <0xd8280000 0x1000>;
+		interrupts = <19>;
+		clocks = <&clki2c0>;
+		clock-frequency = <400000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
new file mode 100644
index 0000000000..f6b2c20cfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
@@ -0,0 +1,15 @@
+APM X-Gene SLIMpro Mailbox I2C Driver
+
+An I2C controller accessed over the "SLIMpro" mailbox.
+
+Required properties :
+
+ - compatible : should be "apm,xgene-slimpro-i2c"
+ - mboxes : use the label reference for the mailbox as the first parameter.
+	    The second parameter is the channel number.
+
+Example :
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
new file mode 100644
index 0000000000..fc3dd7ec04
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -0,0 +1,151 @@
+Generic device tree bindings for I2C busses
+===========================================
+
+This document describes generic bindings which can be used to describe I2C
+busses and their child devices in a device tree.
+
+Required properties (per bus)
+-----------------------------
+
+- #address-cells  - should be <1>. Read more about addresses below.
+- #size-cells     - should be <0>.
+- compatible      - name of I2C bus controller
+
+For other required properties e.g. to describe register sets,
+clocks, etc. check the binding documentation of the specific driver.
+
+The cells properties above define that an address of children of an I2C bus
+are described by a single value.
+
+Optional properties (per bus)
+-----------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- clock-frequency
+	frequency of bus clock in Hz.
+
+- i2c-bus
+	For I2C adapters that have child nodes that are a mixture of both I2C
+	devices and non-I2C devices, the 'i2c-bus' subnode can be used for
+	populating I2C devices. If the 'i2c-bus' subnode is present, only
+	subnodes of this will be considered as I2C slaves. The properties,
+	'#address-cells' and '#size-cells' must be defined under this subnode
+	if present.
+
+- i2c-scl-falling-time-ns
+	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+	specification.
+
+- i2c-scl-internal-delay-ns
+	Number of nanoseconds the IP core additionally needs to setup SCL.
+
+- i2c-scl-rising-time-ns
+	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+	specification.
+
+- i2c-sda-falling-time-ns
+	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
+	specification.
+
+- i2c-analog-filter
+	Enable analog filter for i2c lines.
+
+- i2c-digital-filter
+	Enable digital filter for i2c lines.
+
+- i2c-digital-filter-width-ns
+	Width of spikes which can be filtered by digital filter
+	(i2c-digital-filter). This width is specified in nanoseconds.
+
+- i2c-analog-filter-cutoff-frequency
+	Frequency that the analog filter (i2c-analog-filter) uses to distinguish
+	which signal to filter. Signal with higher frequency than specified will
+	be filtered out. Only lower frequency will pass (this is applicable to
+	a low-pass analog filter). Typical value should be above the normal
+	i2c bus clock frequency (clock-frequency).
+	Specified in Hz.
+
+- multi-master
+	states that there is another master active on this bus. The OS can use
+	this information to adapt power management to keep the arbitration awake
+	all the time, for example. Can not be combined with 'single-master'.
+
+- pinctrl
+	add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
+	recovery, call it "gpio" or "recovery" (deprecated) state
+
+- scl-gpios
+	specify the gpio related to SCL pin. Used for GPIO bus recovery.
+
+- sda-gpios
+	specify the gpio related to SDA pin. Optional for GPIO bus recovery.
+
+- single-master
+	states that there is no other master active on this bus. The OS can use
+	this information to detect a stalled bus more reliably, for example.
+	Can not be combined with 'multi-master'.
+
+- smbus
+	states that additional SMBus restrictions and features apply to this bus.
+	An example of feature is SMBusHostNotify. Examples of restrictions are
+	more reserved addresses and timeout definitions.
+
+- smbus-alert
+	states that the optional SMBus-Alert feature apply to this bus.
+
+- mctp-controller
+	indicates that the system is accessible via this bus as an endpoint for
+	MCTP over I2C transport.
+
+Required properties (per child device)
+--------------------------------------
+
+- compatible
+	name of I2C slave device
+
+- reg
+	One or many I2C slave addresses. These are usually a 7 bit addresses.
+	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
+	used to mark a 10 bit address. It is needed to avoid the ambiguity
+	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
+	which, in theory, can be on the same bus.
+	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
+	listen to be devices ourselves.
+
+Optional properties (per child device)
+--------------------------------------
+
+These properties may not be supported by all drivers. However, if a driver
+wants to support one of the below features, it should adapt these bindings.
+
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
+- interrupts
+	interrupts used by the device.
+
+- interrupt-names
+	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+	other names are	left to individual drivers.
+
+- reg-names
+	Names of map programmable addresses.
+	It can contain any map needing another address than default one.
+
+- wakeup-source
+	device can be used as a wakeup source.
+
+Binding may contain optional "interrupts" property, describing interrupts
+used by the device. I2C core will assign "irq" interrupt (or the very first
+interrupt if not using interrupt names) as primary interrupt for the slave.
+
+Alternatively, devices supporting SMBus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
+Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
+interrupt for the device. If "wakeup" interrupt name is not present in the
+binding, then primary interrupt will be used as wakeup interrupt.
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
new file mode 100644
index 0000000000..b61fdc9548
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs I2C controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  $nodename:
+    pattern: "^i2c@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4770-i2c
+          - ingenic,x1000-i2c
+      - items:
+          - const: ingenic,jz4780-i2c
+          - const: ingenic,jz4770-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c@10054000 {
+      compatible = "ingenic,jz4780-i2c", "ingenic,jz4770-i2c";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0x10054000 0x1000>;
+
+      interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+      clocks = <&cgu JZ4780_CLK_SMB4>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pins_i2c4_data>;
+
+      dmas = <&dma JZ4780_DMA_SMB4_RX 0xffffffff>,
+             <&dma JZ4780_DMA_SMB4_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+
+      clock-frequency = <400000>;
+
+      rtc@51 {
+        compatible = "nxp,pcf8563";
+        reg = <0x51>;
+
+        interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
new file mode 100644
index 0000000000..67882ec6e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/loongson,ls2x-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X I2C Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-i2c
+      - loongson,ls7a-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1fe21000 {
+        compatible = "loongson,ls2k-i2c";
+        reg = <0x1fe21000 0x8>;
+        interrupt-parent = <&extioiic>;
+        interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@57 {
+            compatible = "atmel,24c16";
+            reg = <0x57>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
new file mode 100644
index 0000000000..984fc1ed3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MV64XXX I2C Controller
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-i2c
+      - items:
+          - const: allwinner,sun7i-a20-i2c
+          - const: allwinner,sun4i-a10-i2c
+      - const: allwinner,sun6i-a31-i2c
+      - items:
+          - enum:
+              - allwinner,suniv-f1c100s-i2c
+              - allwinner,sun8i-a23-i2c
+              - allwinner,sun8i-a83t-i2c
+              - allwinner,sun8i-v536-i2c
+              - allwinner,sun50i-a64-i2c
+              - allwinner,sun50i-h6-i2c
+          - const: allwinner,sun6i-a31-i2c
+      - description: Allwinner SoCs with offload support
+        items:
+          - enum:
+              - allwinner,sun20i-d1-i2c
+              - allwinner,sun50i-a100-i2c
+              - allwinner,sun50i-h616-i2c
+              - allwinner,sun50i-r329-i2c
+          - const: allwinner,sun8i-v536-i2c
+          - const: allwinner,sun6i-a31-i2c
+      - const: marvell,mv64xxx-i2c
+      - const: marvell,mv78230-i2c
+      - const: marvell,mv78230-a0-i2c
+
+    description:
+      Only use "marvell,mv78230-a0-i2c" for a very rare, initial
+      version of the SoC which had broken offload support. Linux
+      auto-detects this and sets it appropriately.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Reference clock for the I2C bus
+      - description: Bus clock (Only for Armada 7K/8K)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+    description:
+      Mandatory if two clocks are used (only for Armada 7k and 8k).
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+dependencies:
+  dmas: [ dma-names ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-i2c
+              - allwinner,sun6i-a31-i2c
+
+    then:
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-i2c
+
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@11000 {
+        compatible = "marvell,mv64xxx-i2c";
+        reg = <0x11000 0x20>;
+        interrupts = <29>;
+        clock-frequency = <100000>;
+    };
+
+  - |
+    i2c@11000 {
+        compatible = "marvell,mv78230-i2c";
+        reg = <0x11000 0x100>;
+        interrupts = <29>;
+        clock-frequency = <100000>;
+    };
+
+  - |
+    i2c@701000 {
+        compatible = "marvell,mv78230-i2c";
+        reg = <0x701000 0x20>;
+        interrupts = <29>;
+        clock-frequency = <100000>;
+        clock-names = "core", "reg";
+        clocks = <&core_clock>, <&reg_clock>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
new file mode 100644
index 0000000000..118ec00fc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/mediatek,mt7621-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Stefan Roese <sr@denx.de>
+
+title: Mediatek MT7621/MT7628 I2C master controller
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: i2c
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2c
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    i2c: i2c@900 {
+      compatible = "mediatek,mt7621-i2c";
+      reg = <0x900 0x100>;
+      clocks = <&sysc MT7621_CLK_I2C>;
+      clock-names = "i2c";
+      resets = <&sysc MT7621_RST_I2C>;
+      reset-names = "i2c";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&i2c_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
new file mode 100644
index 0000000000..afa3db7262
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+      - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg 15>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 0000000000..00eb6ff6f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller
+
+description: |
+  I2C bus controllers of the NPCM series support both master and
+  slave mode. Each controller can switch between master and slave at run time
+  (i.e. IPMB mode). HW FIFO for TX and RX are supported.
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-i2c
+      - nuvoton,npcm845-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+  nuvoton,sys-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of system manager register node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,npcm845-i2c
+
+    then:
+      required:
+        - nuvoton,sys-mgr
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c0: i2c@80000 {
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        clock-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        compatible = "nuvoton,npcm750-i2c";
+        nuvoton,sys-mgr = <&gcr>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
new file mode 100644
index 0000000000..b8319dcf3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP I2C controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186 and later, the BPMP (Boot and Power Management Processor)
+  owns certain HW devices, such as the I2C controller for the power
+  management I2C bus. Software running on other CPUs must perform IPC to
+  the BPMP in order to execute transactions on that I2C bus. This
+  binding describes an I2C bus that is accessed in such a fashion.
+
+  The BPMP I2C node must be located directly inside the main BPMP node.
+  See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
+  binding.
+
+  This node represents an I2C controller. See ../i2c/i2c.txt for details
+  of the core I2C binding.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-bpmp-i2c
+
+  nvidia,bpmp-bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Indicates the I2C bus number this DT node represents,
+      as defined by the BPMP firmware.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - nvidia,bpmp-bus-id
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 0000000000..424a4fc218
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+  compatible:
+    oneOf:
+      - description: Tegra20 has 4 generic I2C controller. This can support
+          master and slave mode of I2C communication. The i2c-tegra driver
+          only support master mode of I2C communication. Driver of I2C
+          controller is only compatible with "nvidia,tegra20-i2c".
+        const: nvidia,tegra20-i2c
+      - description: Tegra20 has specific I2C controller called as DVC I2C
+          controller. This only support master mode of I2C communication.
+          Register interface/offset and interrupts handling are different than
+          generic I2C controller. Driver of DVC I2C controller is only
+          compatible with "nvidia,tegra20-i2c-dvc".
+        const: nvidia,tegra20-i2c-dvc
+      - description: |
+          Tegra30 has 5 generic I2C controller. This controller is very much
+          similar to Tegra20 I2C controller with additional feature: Continue
+          Transfer Support. This feature helps to implement M_NO_START as per
+          I2C core API transfer flags. Driver of I2C controller is compatible
+          with "nvidia,tegra30-i2c" to enable the continue transfer support.
+          This is also compatible with "nvidia,tegra20-i2c" without continue
+          transfer support.
+        items:
+          - const: nvidia,tegra30-i2c
+          - const: nvidia,tegra20-i2c
+      - description: |
+          Tegra114 has 5 generic I2C controllers. This controller is very much
+          similar to Tegra30 I2C controller with some hardware modification:
+            - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+              and fast-clk. Tegra114 has only one clock source called as
+              div-clk and hence clock mechanism is changed in I2C controller.
+            - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+              by default and there is no way to disable it. Tegra114 has this
+              interrupt disable by default and SW need to enable explicitly.
+          Due to above changes, Tegra114 I2C driver makes incompatible with
+          previous hardware driver. Hence, Tegra114 I2C controller is
+          compatible with "nvidia,tegra114-i2c".
+        const: nvidia,tegra114-i2c
+      - description: |
+          Tegra124 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra114 but also contain several hardware
+          improvements and new registers.
+        const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra124.
+        items:
+          - const: nvidia,tegra210-i2c
+          - const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has one I2C controller that is on host1x bus and is part of
+          the VE power domain and typically used for camera use-cases. This VI
+          I2C controller is mostly compatible with the programming model of
+          the regular I2C controllers with a few exceptions. The I2C registers
+          start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+          apart (rather than 4) and the controller does not support slave
+          mode.
+        const: nvidia,tegra210-i2c-vi
+      - description: |
+          Tegra186 has 9 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra210.
+        const: nvidia,tegra186-i2c
+      - description: |
+          Tegra194 has 8 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra186. However, these controllers have
+          support for 64 KiB transactions whereas earlier chips supported no
+          more than 4 KiB per transactions.
+        const: nvidia,tegra194-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: i2c
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-i2c
+              - nvidia,tegra30-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: fast-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c-vi
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: slow
+        power-domains:
+          items:
+            - description: phandle to the VENC power domain
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7000c000 {
+        compatible = "nvidia,tegra20-i2c";
+        reg = <0x7000c000 0x100>;
+        interrupts = <0 38 0x04>;
+        clocks = <&tegra_car 12>, <&tegra_car 124>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 12>;
+        reset-names = "i2c";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml b/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml
new file mode 100644
index 0000000000..b65c25c1a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,pca9541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9541 I2C bus master selector
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+properties:
+  compatible:
+    const: nxp,pca9541
+
+  reg:
+    maxItems: 1
+
+  i2c-arb:
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description:
+      I2C arbitration bus node.
+
+required:
+  - compatible
+  - reg
+  - i2c-arb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-arbitrator@74 {
+            compatible = "nxp,pca9541";
+            reg = <0x74>;
+
+            i2c-arb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                eeprom@54 {
+                    compatible = "atmel,24c08";
+                    reg = <0x54>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 0000000000..d9ef867290
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
new file mode 100644
index 0000000000..042d4dc636
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8226-cci
+          - qcom,msm8974-cci
+          - qcom,msm8996-cci
+
+      - items:
+          - enum:
+              - qcom,msm8916-cci
+          - const: qcom,msm8226-cci # CCI v1
+
+      - items:
+          - enum:
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+          - const: qcom,msm8996-cci # CCI v2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^i2c-bus@[01]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clock-frequency:
+        default: 100000
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-cci
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8916-cci
+    then:
+      properties:
+        i2c-bus@1: false
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8974-cci
+
+            - const: qcom,msm8226-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8916-cci
+
+            - const: qcom,msm8996-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+            - const: camss_ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cci@ac4a000 {
+        reg = <0x0ac4a000 0x4000>;
+        compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                 <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                 <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                 <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+        clock-names = "camnoc_axi",
+                      "soc_ahb",
+                      "slow_ahb_src",
+                      "cpas_ahb",
+                      "cci",
+                      "cci_src";
+
+        assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                          <&clock_camcc CAM_CC_CCI_CLK>;
+        assigned-clock-rates = <80000000>,
+                               <37500000>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cci0_default &cci1_default>;
+        pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@10 {
+                compatible = "ovti,ov8856";
+                reg = <0x10>;
+
+                reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam0_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                clock-names = "xvclk";
+                clock-frequency = <19200000>;
+
+                dovdd-supply = <&vreg_lvs1a_1p8>;
+                avdd-supply = <&cam0_avdd_2v8>;
+                dvdd-supply = <&cam0_dvdd_1v2>;
+
+                port {
+                    ov8856_ep: endpoint {
+                        link-frequencies = /bits/ 64 <360000000 180000000>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csiphy0_ep>;
+                    };
+                };
+            };
+        };
+
+        cci_i2c1: i2c-bus@1 {
+            reg = <1>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@60 {
+                compatible = "ovti,ov7251";
+                reg = <0x60>;
+
+                enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam3_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                clock-names = "xclk";
+                clock-frequency = <24000000>;
+
+                vdddo-supply = <&vreg_lvs1a_1p8>;
+                vdda-supply = <&cam3_avdd_2v8>;
+
+                port {
+                    ov7251_ep: endpoint {
+                        data-lanes = <0 1>;
+                        link-frequencies = /bits/ 64 <240000000 319200000>;
+                        remote-endpoint = <&csiphy3_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 0000000000..9f66a3bb1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-i2c
+      - qcom,geni-i2c-master-hub
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-i2c-master-hub
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: se
+            - const: core
+
+        dmas: false
+        dma-names: false
+
+        interconnects:
+          maxItems: 2
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: se
+
+        interconnects:
+          minItems: 3
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+            - const: qup-memory
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@88000 {
+        compatible = "qcom,geni-i2c";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_i2c0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "qup-core", "qup-config", "qup-memory";
+        power-domains = <&rpmhpd SC7180_CX>;
+        required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
new file mode 100644
index 0000000000..f43947514d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) I2C controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,i2c-qup-v1.1.1     # for 8660, 8960 and 8064
+      - qcom,i2c-qup-v2.1.1     # for 8974 v1
+      - qcom,i2c-qup-v2.2.1     # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@c175000 {
+        compatible = "qcom,i2c-qup-v2.2.1";
+        reg = <0x0c175000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_i2c1_default>;
+        pinctrl-1 = <&blsp1_i2c1_sleep>;
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
new file mode 100644
index 0000000000..17c1102562
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,iic-emev2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile EV2 IIC Interface
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,iic-emev2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iic0: i2c@e0070000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "renesas,iic-emev2";
+            reg = <0xe0070000 0x28>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&iic0_sclk>;
+            clock-names = "sclk";
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
new file mode 100644
index 0000000000..c4ace5585e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rcar-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car I2C Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,i2c-r8a7778      # R-Car M1A
+              - renesas,i2c-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-i2c # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a7742      # RZ/G1H
+              - renesas,i2c-r8a7743      # RZ/G1M
+              - renesas,i2c-r8a7744      # RZ/G1N
+              - renesas,i2c-r8a7745      # RZ/G1E
+              - renesas,i2c-r8a77470     # RZ/G1C
+              - renesas,i2c-r8a7790      # R-Car H2
+              - renesas,i2c-r8a7791      # R-Car M2-W
+              - renesas,i2c-r8a7792      # R-Car V2H
+              - renesas,i2c-r8a7793      # R-Car M2-N
+              - renesas,i2c-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-i2c # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a774a1     # RZ/G2M
+              - renesas,i2c-r8a774b1     # RZ/G2N
+              - renesas,i2c-r8a774c0     # RZ/G2E
+              - renesas,i2c-r8a774e1     # RZ/G2H
+              - renesas,i2c-r8a7795      # R-Car H3
+              - renesas,i2c-r8a7796      # R-Car M3-W
+              - renesas,i2c-r8a77961     # R-Car M3-W+
+              - renesas,i2c-r8a77965     # R-Car M3-N
+              - renesas,i2c-r8a77970     # R-Car V3M
+              - renesas,i2c-r8a77980     # R-Car V3H
+              - renesas,i2c-r8a77990     # R-Car E3
+              - renesas,i2c-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,i2c-r8a779a0     # R-Car V3U
+              - renesas,i2c-r8a779f0     # R-Car S4-8
+              - renesas,i2c-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-i2c # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  i2c-scl-falling-time-ns:
+    default: 35
+    description:
+      Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+      specification.
+
+  i2c-scl-internal-delay-ns:
+    default: 50
+    description:
+      Number of nanoseconds the IP core additionally needs to setup SCL.
+
+  i2c-scl-rising-time-ns:
+    default: 200
+    description:
+      Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+      specification.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen1-i2c
+              - renesas,rcar-gen2-i2c
+    then:
+      properties:
+        dmas: false
+        dma-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-i2c
+              - renesas,rcar-gen3-i2c
+              - renesas,rcar-gen4-i2c
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    i2c0: i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+            reg = <0xe6508000 0x40>;
+            interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+            clock-frequency = <400000>;
+            clocks = <&cpg CPG_MOD 931>;
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 931>;
+            i2c-scl-internal-delay-ns = <6>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
new file mode 100644
index 0000000000..2291a7cd61
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,riic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A and RZ/G2L I2C Bus Interface (RIIC)
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,riic-r7s72100   # RZ/A1H
+          - renesas,riic-r7s9210    # RZ/A2M
+          - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
+          - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+          - renesas,riic-r9a07g054  # RZ/V2L
+      - const: renesas,riic-rz      # RZ/A or RZ/G2L
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Transmit End Interrupt
+      - description: Receive Data Full Interrupt
+      - description: Transmit Data Empty Interrupt
+      - description: Stop Condition Detection Interrupt
+      - description: Start Condition Detection Interrupt
+      - description: NACK Reception Interrupt
+      - description: Arbitration-Lost Interrupt
+      - description: Timeout Interrupt
+
+  interrupt-names:
+    items:
+      - const: tei
+      - const: ri
+      - const: ti
+      - const: spi
+      - const: sti
+      - const: naki
+      - const: ali
+      - const: tmoi
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-frequency
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,riic-r9a07g043
+          - renesas,riic-r9a07g044
+          - renesas,riic-r9a07g054
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@fcfee000 {
+            compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+            reg = <0xfcfee000 0x44>;
+            interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+                              "tmoi";
+            clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+            clock-frequency = <100000>;
+            power-domains = <&cpg_clocks>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
new file mode 100644
index 0000000000..04e4ffd80b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rmobile-iic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile I2C Bus Interface (IIC)
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,iic-r8a73a4      # R-Mobile APE6
+              - renesas,iic-r8a7740      # R-Mobile A1
+              - renesas,iic-sh73a0       # SH-Mobile AG5
+          - const: renesas,rmobile-iic   # Generic
+
+      - items:
+          - enum:
+              - renesas,iic-r8a7742      # RZ/G1H
+              - renesas,iic-r8a7743      # RZ/G1M
+              - renesas,iic-r8a7744      # RZ/G1N
+              - renesas,iic-r8a7745      # RZ/G1E
+              - renesas,iic-r8a7790      # R-Car H2
+              - renesas,iic-r8a7791      # R-Car M2-W
+              - renesas,iic-r8a7792      # R-Car V2H
+              - renesas,iic-r8a7793      # R-Car M2-N
+              - renesas,iic-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-iic # R-Car Gen2 and RZ/G1
+          - const: renesas,rmobile-iic   # Generic
+
+      - items:
+          - enum:
+              - renesas,iic-r8a774a1     # RZ/G2M
+              - renesas,iic-r8a774b1     # RZ/G2N
+              - renesas,iic-r8a774c0     # RZ/G2E
+              - renesas,iic-r8a774e1     # RZ/G2H
+              - renesas,iic-r8a7795      # R-Car H3
+              - renesas,iic-r8a7796      # R-Car M3-W
+              - renesas,iic-r8a77961     # R-Car M3-W+
+              - renesas,iic-r8a77965     # R-Car M3-N
+              - renesas,iic-r8a77990     # R-Car E3
+          - const: renesas,rcar-gen3-iic # R-Car Gen3 and RZ/G2
+          - const: renesas,rmobile-iic   # Generic
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clock-frequency:
+    description:
+      Desired I2C bus clock frequency in Hz. The absence of this property
+      indicates the default frequency 100 kHz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,iic-r8a7740
+              - renesas,iic-sh73a0
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Arbitration Lost Interrupt (ALI)
+            - description: Non-acknowledge Detection Interrupt (TACKI)
+            - description: Wait Interrupt (WAITI)
+            - description: Data Transmit Enable interrupt (DTEI)
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Single combined interrupt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-iic
+              - renesas,rcar-gen3-iic
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    iic0: i2c@e6500000 {
+            compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+                         "renesas,rmobile-iic";
+            reg = <0xe6500000 0x425>;
+            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 318>;
+            clock-frequency = <400000>;
+            dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+            dma-names = "tx", "rx", "tx", "rx";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 318>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
new file mode 100644
index 0000000000..5d1e7885b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M I2C Bus Interface
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a09g011-i2c  # RZ/V2M
+      - const: renesas,rzv2m-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Data transmission/reception interrupt
+      - description: Status interrupt
+
+  interrupt-names:
+    items:
+      - const: tia
+      - const: tis
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+    description:
+      Desired I2C bus clock frequency in Hz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@a4030000 {
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+        reg = <0xa4030000 0x80>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "tia", "tis";
+        clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+        resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+        power-domains = <&cpg>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
new file mode 100644
index 0000000000..b204e35e4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC I2C Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-i2c
+      - samsung,s3c2440-i2c
+        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+      - samsung,s3c2440-hdmiphy-i2c
+        # For s3c2440-like I2C used as a host to SATA PHY controller on an
+        # internal bus:
+      - samsung,exynos5-sata-phy-i2c
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: i2c
+
+  gpios:
+    description: |
+      The order of the GPIOs should be the following:: <SDA, SCL>.  The GPIO
+      specifier depends on the gpio controller. Required in all cases except
+      for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
+      permanently wired to the respective client.
+      This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
+    deprecated: true
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,i2c-max-bus-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Desired frequency in Hz of the bus.
+    default: 100000
+
+  samsung,i2c-sda-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay (in ns) applied to data line (SDA) edges.
+    default: 0
+
+  samsung,i2c-slave-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slave address in multi-master environment.
+    default: 0
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Pandle to syscon used to control the system registers.
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2440-hdmiphy-i2c
+              - samsung,exynos5-sata-phy-i2c
+    then:
+      properties:
+        gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-i2c
+              - samsung,s3c2440-i2c
+              - samsung,s3c2440-hdmiphy-i2c
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@12c60000 {
+        compatible = "samsung,s3c2440-i2c";
+        reg = <0x12C60000 0x100>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C0>;
+        clock-names = "i2c";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_bus>;
+
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <20000>;
+        samsung,i2c-slave-addr = <0x66>;
+
+        eeprom@50 {
+            compatible = "samsung,s524ad0xd1", "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
+
+    i2c@12ce0000 {
+        compatible = "samsung,s3c2440-hdmiphy-i2c";
+        reg = <0x12CE0000 0x1000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C_HDMI>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <66000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos4212-hdmiphy";
+            reg = <0x38>;
+        };
+    };
+
+    i2c@121d0000 {
+        compatible = "samsung,exynos5-sata-phy-i2c";
+        reg = <0x121D0000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_SATA_PHYI2C>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <40000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos-sataphy-i2c";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
new file mode 100644
index 0000000000..d9293c57f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB I2C Controller
+
+maintainers:
+  - Jarkko Nikula <jarkko.nikula@linux.intel.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: mscc,ocelot-i2c
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic Synopsys DesignWare I2C controller
+        const: snps,designware-i2c
+      - description: Microsemi Ocelot SoCs I2C controller
+        items:
+          - const: mscc,ocelot-i2c
+          - const: snps,designware-i2c
+      - description: Baikal-T1 SoC System I2C controller
+        const: baikal,bt1-sys-i2c
+
+  reg:
+    minItems: 1
+    items:
+      - description: DW APB I2C controller memory mapped registers
+      - description: |
+          ICPU_CFG:TWI_DELAY registers to setup the SDA hold time.
+          This registers are specific to the Ocelot I2C-controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz
+    enum: [100000, 400000, 1000000, 3400000]
+    default: 400000
+
+  i2c-sda-hold-time-ns:
+    description: |
+      The property should contain the SDA hold time in nanoseconds. This option
+      is only supported in hardware blocks version 1.11a or newer or on
+      Microsemi SoCs.
+
+  i2c-scl-falling-time-ns:
+    description: |
+      The property should contain the SCL falling time in nanoseconds.
+      This value is used to compute the tLOW period.
+    default: 300
+
+  i2c-sda-falling-time-ns:
+    description: |
+      The property should contain the SDA falling time in nanoseconds.
+      This value is used to compute the tHIGH period.
+    default: 300
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c@f0000 {
+      compatible = "snps,designware-i2c";
+      reg = <0xf0000 0x1000>;
+      interrupts = <11>;
+      clock-frequency = <400000>;
+    };
+  - |
+    i2c@1120000 {
+      compatible = "snps,designware-i2c";
+      reg = <0x1120000 0x1000>;
+      interrupts = <12 1>;
+      clock-frequency = <400000>;
+      i2c-sda-hold-time-ns = <300>;
+      i2c-sda-falling-time-ns = <300>;
+      i2c-scl-falling-time-ns = <300>;
+    };
+  - |
+    i2c@2000 {
+      compatible = "snps,designware-i2c";
+      reg = <0x2000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clock-frequency = <400000>;
+      clocks = <&i2cclk>;
+      interrupts = <0>;
+
+      eeprom@64 {
+        compatible = "atmel,24c02";
+        reg = <0x64>;
+      };
+    };
+  - |
+    i2c@100400 {
+      compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+      reg = <0x100400 0x100>, <0x198 0x8>;
+      pinctrl-0 = <&i2c_pins>;
+      pinctrl-names = "default";
+      interrupts = <8>;
+      clocks = <&ahb_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
new file mode 100644
index 0000000000..f9d6e2038b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,synquacer-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer I2C Controller
+
+maintainers:
+  - Ard Biesheuvel <ardb@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@51210000 {
+        compatible = "socionext,synquacer-i2c";
+        reg = <0x51210000 0x1000>;
+        interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-names = "pclk";
+        clocks = <&clk_i2c>;
+        clock-frequency = <400000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
new file mode 100644
index 0000000000..4bbe9e775d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-fi2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-builtin)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-fi2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@58780000 {
+        compatible = "socionext,uniphier-fi2c";
+        reg = <0x58780000 0x80>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 4>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
new file mode 100644
index 0000000000..5abf496edb
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,uniphier-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier I2C controller (FIFO-less)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@58400000 {
+        compatible = "socionext,uniphier-i2c";
+        reg = <0x58400000 0x40>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 41 1>;
+        clocks = <&i2c_clk>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
new file mode 100644
index 0000000000..16024415a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik I2C
+
+description: The Nomadik I2C host controller began its life in the ST
+  Microelectronics STn8800 SoC, and was then inherited into STn8810 and
+  STn8815. It was part of the prototype STn8500 which then became ST-Ericsson
+  DB8500 after the merge of these two companies wireless divisions.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,nomadik-i2c
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # The variant found in STn8815
+      - items:
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+      # The variant found in DB8500
+      - items:
+          - const: stericsson,db8500-i2c
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      # Clock name in STn8815
+      - items:
+          - const: mclk
+          - const: apb_pclk
+      # Clock name in DB8500
+      - items:
+          - const: i2cclk
+          - const: apb_pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+    #include <dt-bindings/arm/ux500_pm_domains.h>
+    i2c@80004000 {
+      compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+      reg = <0x80004000 0x1000>;
+      interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-frequency = <400000>;
+      clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+      clock-names = "i2cclk", "apb_pclk";
+      power-domains = <&pm_domains DOMAIN_VAPE>;
+      resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+    };
+
+    i2c@101f8000 {
+      compatible = "st,nomadik-i2c", "arm,primecell";
+      reg = <0x101f8000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <20>;
+      clock-frequency = <100000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c0clk>, <&pclki2c0>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
new file mode 100644
index 0000000000..08f9c1e446
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,sti-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STi platform
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,comms-ssc-i2c
+      - st,comms-ssc4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+    default: 100000
+
+  st,i2c-min-scl-pulse-width-us:
+    description:
+      The minimum valid SCL pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+  st,i2c-min-sda-pulse-width-us:
+    description:
+      The minimum valid SDA pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    i2c@fed40000 {
+        compatible = "st,comms-ssc4-i2c";
+        reg = <0xfed40000 0x110>;
+        interrupts =  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+        clock-names = "ssc";
+        clock-frequency = <400000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c0_default>;
+        st,i2c-min-scl-pulse-width-us = <0>;
+        st,i2c-min-sda-pulse-width-us = <5>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
new file mode 100644
index 0000000000..94b75d9f66
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STM32 I2C platform
+
+maintainers:
+  - Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f7-i2c
+              - st,stm32mp13-i2c
+              - st,stm32mp15-i2c
+    then:
+      properties:
+        i2c-scl-rising-time-ns:
+          default: 25
+
+        i2c-scl-falling-time-ns:
+          default: 10
+    else:
+      properties:
+        st,syscfg-fmp: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f4-i2c
+    then:
+      properties:
+        clock-frequency:
+          enum: [100000, 400000]
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-i2c
+      - st,stm32f7-i2c
+      - st,stm32mp13-i2c
+      - st,stm32mp15-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt ID for I2C event
+      - description: interrupt ID for I2C error
+
+  interrupt-names:
+    items:
+      - const: event
+      - const: error
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: RX DMA Channel phandle
+      - description: TX DMA Channel phandle
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clock-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters
+                 match, the bus clock frequency can be from 1Hz to 1MHz.
+    default: 100000
+    minimum: 1
+    maximum: 1000000
+
+  st,syscfg-fmp:
+    description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+      Plus speed is selected by slave.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for FMP bit
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    //Example 1 (with st,stm32f4-i2c compatible)
+      i2c@40005400 {
+          compatible = "st,stm32f4-i2c";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0x40005400 0x400>;
+          interrupts = <31>,
+                       <32>;
+          resets = <&rcc 277>;
+          clocks = <&rcc 0 149>;
+      };
+
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    //Example 2 (with st,stm32f7-i2c compatible)
+      i2c@40005800 {
+          compatible = "st,stm32f7-i2c";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0x40005800 0x400>;
+          interrupts = <31>,
+                       <32>;
+          resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+          clocks = <&rcc 1 CLK_I2C1>;
+      };
+
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+      i2c@40013000 {
+          compatible = "st,stm32mp15-i2c";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0x40013000 0x400>;
+          interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&rcc I2C2_K>;
+          resets = <&rcc I2C2_R>;
+          i2c-scl-rising-time-ns = <185>;
+          i2c-scl-falling-time-ns = <20>;
+          st,syscfg-fmp = <&syscfg 0x4 0x2>;
+      };
diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
new file mode 100644
index 0000000000..781108ae1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controllers on TI's OMAP and K3 SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,omap2420-i2c
+          - ti,omap2430-i2c
+          - ti,omap3-i2c
+          - ti,omap4-i2c
+      - items:
+          - enum:
+              - ti,am4372-i2c
+              - ti,am64-i2c
+              - ti,am654-i2c
+              - ti,j721e-i2c
+          - const: ti,omap4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  clock-frequency: true
+
+  power-domains: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  ti,hwmods:
+    description:
+      Must be "i2c<n>", n being the instance number (1-based).
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+# subnode's properties
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description:
+      Flash device uses the below defined properties in the subnode.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,omap2420-i2c
+        - ti,omap2430-i2c
+        - ti,omap3-i2c
+        - ti,omap4-i2c
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^i2c([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    main_i2c0: i2c@2000000 {
+            compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+            reg = <0x2000000 0x100>;
+            interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+         };
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
new file mode 100644
index 0000000000..658ae92fa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx IIC controller
+
+maintainers:
+  - info@mocean-labs.com
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,axi-iic-2.1
+      - xlnx,xps-iic-2.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-name:
+    const: pclk
+    description: |
+      Input clock name.
+
+  clock-frequency:
+    description:
+      Optional I2C SCL clock frequency. If not specified, do not configure
+      in software, rely only on hardware design value.
+    default: 100000
+    enum: [ 100000, 400000, 1000000 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    axi_iic_0: i2c@40800000 {
+      compatible = "xlnx,xps-iic-2.00.a";
+      clocks = <&clkc 15>;
+      interrupts = < 1 2 >;
+      reg = < 0x40800000 0x10000 >;
+
+      #size-cells = <0>;
+      #address-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
new file mode 100644
index 0000000000..fcc3dbff9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/aspeed,ast2600-i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 i3c controller
+
+maintainers:
+  - Jeremy Kerr <jk@codeconstruct.com.au>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: aspeed,ast2600-i3c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  sda-pullup-ohms:
+    enum: [545, 750, 2000]
+    default: 2000
+    description: |
+      Value to configure SDA pullup resistor, in Ohms.
+
+  aspeed,global-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to i3c global register syscon node
+          - description: index of this i3c controller in the global register set
+    description: |
+      A (phandle, controller index) reference to the i3c global register set
+      used for this device.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,global-regs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c-master@2000 {
+        compatible = "aspeed,ast2600-i3c";
+        reg = <0x2000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        clocks = <&syscon 0>;
+        resets = <&syscon 0>;
+        aspeed,global-regs = <&i3c_global 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i3c1_default>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
new file mode 100644
index 0000000000..cc40d25358
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I3C master block
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: cdns,i3c-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sysclk
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
new file mode 100644
index 0000000000..ab69f4115d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I3C bus
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  I3C busses can be described with a node for the primary I3C controller device
+  and a set of child nodes for each I2C or I3C slave on the bus. Each of them
+  may, during the life of the bus, request mastership.
+
+properties:
+  $nodename:
+    pattern: "^i3c-master@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 3
+    description: |
+      Each I2C device connected to the bus should be described in a subnode.
+
+      All I3C devices are supposed to support DAA (Dynamic Address Assignment),
+      and are thus discoverable. So, by default, I3C devices do not have to be
+      described in the device tree. This being said, one might want to attach
+      extra resources to these devices, and those resources may have to be
+      described in the device tree, which in turn means we have to describe
+      I3C devices.
+
+      Another use case for describing an I3C device in the device tree is when
+      this I3C device has a static I2C address and we want to assign it a
+      specific I3C dynamic address before the DAA takes place (so that other
+      devices on the bus can't take this dynamic address).
+
+  "#size-cells":
+    const: 0
+
+  i3c-scl-hz:
+    description: |
+      Frequency of the SCL signal used for I3C transfers. When undefined, the
+      default value should be 12.5MHz.
+
+      May not be supported by all controllers.
+
+  i2c-scl-hz:
+    description: |
+      Frequency of the SCL signal used for I2C transfers. When undefined, the
+      default should be to look at LVR (Legacy Virtual Register) values of
+      I2C devices described in the device tree to determine the maximum I2C
+      frequency.
+
+      May not be supported by all controllers.
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description: |
+      I2C child, should be named: <device-type>@<i2c-address>
+
+      All properties described in Documentation/devicetree/bindings/i2c/i2c.txt
+      are valid here, except the reg property whose content is changed.
+
+    properties:
+      compatible:
+        description:
+          Compatible of the I2C device.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  I2C address. 10 bit addressing is not supported. Devices with
+                  10-bit address can't be properly passed through DEFSLVS
+                  command.
+                minimum: 0
+                maximum: 0x7f
+              - const: 0
+              - description: |
+                  Shall encode the I3C LVR (Legacy Virtual Register):
+                    bit[31:8]: unused/ignored
+                    bit[7:5]: I2C device index. Possible values:
+                      * 0: I2C device has a 50 ns spike filter
+                      * 1: I2C device does not have a 50 ns spike filter but
+                           supports high frequency on SCL
+                      * 2: I2C device does not have a 50 ns spike filter and is
+                           not tolerant to high frequencies
+                      * 3-7: reserved
+                    bit[4]: tell whether the device operates in FM (Fast Mode)
+                            or FM+ mode:
+                      * 0: FM+ mode
+                      * 1: FM mode
+                    bit[3:0]: device type
+                      * 0-15: reserved
+
+    required:
+      - compatible
+      - reg
+
+  "@[0-9a-f]+,[0-9a-f]+$":
+    type: object
+    description: |
+      I3C child, should be named: <device-type>@<static-i2c-address>,<i3c-pid>
+
+    properties:
+      reg:
+        items:
+          - items:
+              - description: |
+                  Encodes the static I2C address. Should be 0 if the device does
+                  not have one (0 is not a valid I2C address).
+                minimum: 0
+                maximum: 0x7f
+              - description: |
+                  First half of the Provisional ID (following the PID
+                  definition provided by the I3C specification).
+
+                  Contains the manufacturer ID left-shifted by 1.
+              - description: |
+                  Second half of the Provisional ID (following the PID
+                  definition provided by the I3C specification).
+
+                  Contains the ORing of the part ID left-shifted by 16,
+                  the instance ID left-shifted by 12 and extra information.
+
+      assigned-address:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0x1
+        maximum: 0xff
+        description: |
+          Dynamic address to be assigned to this device. In case static address is
+          present (first cell of the reg property != 0), this address is assigned
+          through SETDASA. If static address is not present, this address is assigned
+          through SETNEWDA after assigning a temporary address via ENTDAA.
+
+    required:
+      - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    i3c-master@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        /* I2C device. */
+        eeprom@57 {
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+
+        /* I3C device with a static I2C address and assigned address. */
+        thermal_sensor: sensor@68,39200144004 {
+            reg = <0x68 0x392 0x144004>;
+            assigned-address = <0xa>;
+        };
+
+        /* I3C device with only assigned address. */
+        pressure_sensor: sensor@0,39200124004 {
+            reg = <0x0 0x392 0x124000>;
+            assigned-address = <0xc>;
+        };
+
+        /*
+         * I3C device without a static I2C address but requiring
+         * resources described in the DT.
+         */
+        sensor@0,39200154004 {
+            reg = <0x0 0x392 0x154004>;
+            clocks = <&clock_provider 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
new file mode 100644
index 0000000000..5dda8cb44c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI I3C HCI
+
+maintainers:
+  - Nicolas Pitre <npitre@baylibre.com>
+
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+
+description: |
+  MIPI I3C Host Controller Interface
+
+  The MIPI I3C HCI (Host Controller Interface) specification defines
+  a common software driver interface to support compliant MIPI I3C
+  host controller hardware implementations from multiple vendors.
+
+  The hardware is self-advertising for differences in implementation
+  capabilities, including the spec version it is based on, so there
+  isn't much to describe here (yet).
+
+  For details, please see:
+  https://www.mipi.org/specifications/i3c-hci
+
+properties:
+  compatible:
+    const: mipi-i3c-hci
+  reg:
+    maxItems: 1
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@a0000000 {
+      compatible = "mipi-i3c-hci";
+      reg = <0xa0000000 0x2000>;
+      interrupts = <89>;
+      #address-cells = <3>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
new file mode 100644
index 0000000000..133855f11b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/silvaco,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silvaco I3C master
+
+maintainers:
+  - Conor Culhane <conor.culhane@silvaco.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: silvaco,i3c-master-v1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: system clock
+      - description: bus clock
+      - description: other (slower) events clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: fast_clk
+      - const: slow_clk
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@a0000000 {
+        compatible = "silvaco,i3c-master-v1";
+        clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
+        clock-names = "pclk", "fast_clk", "slow_clk";
+        interrupt-parent = <&gic>;
+        interrupts = <0 89 4>;
+        reg = <0xa0000000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
new file mode 100644
index 0000000000..7a76fd3296
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare I3C master block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-i3c-master-1.00a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@2000 {
+        compatible = "snps,dw-i3c-master-1.00a";
+        #address-cells = <3>;
+        #size-cells = <0>;
+        reg = <0x02000 0x1000>;
+        interrupts = <0>;
+        clocks = <&i3cclk>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
new file mode 100644
index 0000000000..b6ba7ad1a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16201 Dual Axis Inclinometer and similar
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+description: |
+  Two similar parts from external interface point of view.
+  SPI interface.
+    https://www.analog.com/en/products/adis16201.html
+    https://www.analog.com/en/products/adis16209.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16201
+      - adi,adis16209
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adis16201";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
new file mode 100644
index 0000000000..5887021cc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16240 Programmable Impact Sensor and Recorder driver
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  ADIS16240 Programmable Impact Sensor and Recorder driver that supports
+  SPI interface.
+    https://www.analog.com/en/products/adis16240.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16240
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adis16240";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
new file mode 100644
index 0000000000..0c5b64cae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
+
+maintainers:
+  - Lucas Stankus <lucas.p.stankus@gmail.com>
+
+description: |
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
+    https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl312
+      - adi,adxl313
+      - adi,adxl314
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+  vs-supply:
+    description: Regulator that supplies power to the accelerometer
+
+  vdd-supply:
+    description: Regulator that supplies the digital interface supply voltage
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl313";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl313";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
new file mode 100644
index 0000000000..07cacc3f6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
+  both I2C & SPI interfaces.
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: adi,adxl346
+          - const: adi,adxl345
+      - enum:
+          - adi,adxl345
+          - adi,adxl375
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@2a {
+            compatible = "adi,adxl345";
+            reg = <0x2a>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl345";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
new file mode 100644
index 0000000000..c07261c710
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+description: |
+  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
+  support both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+    https://www.analog.com/en/products/adxl359.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+      - adi,adxl359
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@1d {
+            compatible = "adi,adxl355";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adxl355";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
new file mode 100644
index 0000000000..f10d98d34c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
new file mode 100644
index 0000000000..62465e36a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+maintainers:
+  - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+  Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl372.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl372
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl372";
+            reg = <0x53>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adxl372";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
new file mode 100644
index 0000000000..ec643de031
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA220 Trixial Acceleration Sensor
+
+maintainers:
+  - Jonathan Cameron <Jonathan.Cameron@huawei.com>
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma220
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdda-supply: true
+  vddd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "bosch,bma220";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
new file mode 100644
index 0000000000..457a709b58
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma255.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA255 and Similar Accelerometers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  3 axis accelerometers with varying range and I2C or SPI
+  4-wire interface.
+
+properties:
+  compatible:
+    enum:
+      # bmc150-accel driver in Linux
+      - bosch,bma222
+      - bosch,bma222e
+      - bosch,bma250e
+      - bosch,bma253
+      - bosch,bma254
+      - bosch,bma255
+      - bosch,bma280
+      - bosch,bmc150_accel
+      - bosch,bmc156_accel
+      - bosch,bmi055_accel
+
+      # bma180 driver in Linux
+      - bosch,bma023
+      - bosch,bma150
+      - bosch,bma180
+      - bosch,bma250
+      - bosch,smb380
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Without interrupt-names, the first interrupt listed must be the one
+      connected to the INT1 pin, the second (optional) interrupt listed must be
+      the one connected to the INT2 pin (if available). The type should be
+      IRQ_TYPE_EDGE_RISING.
+
+      BMC156 does not have an INT1 pin, therefore the first interrupt pin is
+      always treated as INT2.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@8 {
+            compatible = "bosch,bma222";
+            reg = <0x08>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@10 {
+            compatible = "bosch,bmc156_accel";
+            reg = <0x10>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <116 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "bosch,bma222";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
new file mode 100644
index 0000000000..8723a33622
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <dan@dlrobertson.com>
+
+description: |
+  Acceleration and temperature iio sensors with an i2c interface
+
+  Specifications about the sensor can be found at:
+    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma400
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  vddio-supply:
+    description: phandle to the regulator that provides power to the sensor's IO
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      accelerometer@14 {
+        compatible = "bosch,bma400";
+        reg = <0x14>;
+        vdd-supply = <&vdd>;
+        vddio-supply = <&vddio>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
new file mode 100644
index 0000000000..3cb82576d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI088 IMU accelerometer part
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Acceleration part of the IMU sensor with an SPI interface
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi085-accel
+      - bosch,bmi088-accel
+      - bosch,bmi090l-accel
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
+      Two configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bmi088-accel@1 {
+        compatible = "bosch,bmi088-accel";
+        reg = <1>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "INT2";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
new file mode 100644
index 0000000000..cb31e75ba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/fsl,mma7455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MMA7455 and MMA7456 three axis accelerometers
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Devices support both SPI and I2C interfaces.
+
+properties:
+  compatible:
+    enum:
+      - fsl,mma7455
+      - fsl,mma7456
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      Data ready is only available on INT1, but events can use either or
+      both pins.  If not specified, first element assumed to correspond
+      to INT1 and second (where present) to INT2.
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@18 {
+            compatible = "fsl,mma7455";
+            reg = <0x18>;
+            vddio-supply = <&iovdd>;
+            avdd-supply = <&avdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>, <58 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT2", "INT1";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@0 {
+            compatible = "fsl,mma7456";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            vddio-supply = <&iovdd>;
+            avdd-supply = <&avdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml
new file mode 100644
index 0000000000..b0dd2b4e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/fsl,mma8452.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q
+  triaxial accelerometer
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,mma8451
+      - fsl,mma8452
+      - fsl,mma8453
+      - fsl,mma8652
+      - fsl,mma8653
+      - fsl,fxls8471
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      2 highly configurable interrupt lines exist.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+    minItems: 1
+    maxItems: 2
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@1d {
+            compatible = "fsl,mma8453";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <5 0>;
+            interrupt-names = "INT2";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
new file mode 100644
index 0000000000..986df1a6ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM/Kionix KX022A Accelerometer
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
+  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
+  KX022A can be accessed either via I2C or SPI.
+
+properties:
+  compatible:
+    const: kionix,kx022a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+  vdd-supply: true
+  io-vdd-supply: true
+
+  mount-matrix:
+    description: |
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@1f {
+            compatible = "kionix,kx022a";
+            reg = <0x1f>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "INT1";
+
+            io-vdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
new file mode 100644
index 0000000000..6ddb03f61b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxcjk1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXCJK-1013 Accelerometer
+
+maintainers:
+  - Robert Yang <decatf@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - kionix,kxcjk1013
+      - kionix,kxcj91008
+      - kionix,kxtj21009
+      - kionix,kxtf9
+      - kionix,kx023-1025
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@f {
+            compatible = "kionix,kxtf9";
+            reg = <0xf>;
+            mount-matrix = "0", "1", "0",
+                           "1", "0", "0",
+                           "0", "0", "1";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
new file mode 100644
index 0000000000..f64d99b354
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXSD9 Accelerometer
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  3 axis 12 bit accelerometer with +-8G range on all axes. Also has a
+  12 bit auxiliary ADC channel. Interface is either SPI or I2C.
+
+properties:
+  compatible:
+    const: kionix,kxsd9
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@18 {
+            compatible = "kionix,kxsd9";
+            reg = <0x18>;
+            iovdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            mount-matrix = "-0.984807753012208", "0",  "-0.173648177666930",
+                           "0",                  "-1", "0",
+                           "-0.173648177666930", "0",  "0.984807753012208";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "kionix,kxsd9";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
new file mode 100644
index 0000000000..764e28ec1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
@@ -0,0 +1,119 @@
+LIS302 accelerometer devicetree bindings
+
+This device is matched via its bus drivers, and has a number of properties
+that apply in on the generic device (independent from the bus).
+
+
+Required properties for the SPI bindings:
+ - compatible: 		should be set to "st,lis3lv02d-spi"
+ - reg:			the chipselect index
+ - spi-max-frequency:	maximal bus speed, should be set to 1000000 unless
+			constrained by external circuitry
+ - interrupts:		the interrupt generated by the device
+
+Required properties for the I2C bindings:
+ - compatible:		should be set to "st,lis3lv02d"
+ - reg:			i2c slave address
+ - Vdd-supply:		The input supply for Vdd
+ - Vdd_IO-supply:	The input supply for Vdd_IO
+
+
+Optional properties for all bus drivers:
+
+ - st,click-single-{x,y,z}:	if present, tells the device to issue an
+				interrupt on single click events on the
+				x/y/z axis.
+ - st,click-double-{x,y,z}:	if present, tells the device to issue an
+				interrupt on double click events on the
+				x/y/z axis.
+ - st,click-thresh-{x,y,z}:	set the x/y/z axis threshold
+ - st,click-click-time-limit:	click time limit, from 0 to 127.5msec
+				with step of 0.5 msec
+ - st,click-latency:		click latency, from 0 to 255 msec with
+				step of 1 msec.
+ - st,click-window:		click window, from 0 to 255 msec with
+				step of 1 msec.
+ - st,irq{1,2}-disable:		disable IRQ 1/2
+ - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
+ - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
+ - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready contition
+ - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
+ - st,irq-open-drain:		consider IRQ lines open-drain
+ - st,irq-active-low:		make IRQ lines active low
+ - st,wu-duration-1:		duration register for Free-Fall/Wake-Up
+				interrupt 1
+ - st,wu-duration-2:		duration register for Free-Fall/Wake-Up
+				interrupt 2
+ - st,wakeup-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit
+ - st,wakeup-threshold:		set wakeup threshold
+ - st,wakeup2-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit for second wakeup
+				engine.
+ - st,wakeup2-threshold:	set wakeup threshold for second wakeup
+				engine.
+ - st,highpass-cutoff-hz=:	1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
+				highpass cut-off frequency
+ - st,hipass{1,2}-disable:	disable highpass 1/2.
+ - st,default-rate=:		set the default rate
+ - st,axis-{x,y,z}=:		set the axis to map to the three coordinates.
+				Negative values can be used for inverted axis.
+ - st,{min,max}-limit-{x,y,z}	set the min/max limits for x/y/z axis
+				(used by self-test)
+
+
+Example for a SPI device node:
+
+	accelerometer@0 {
+		compatible = "st,lis302dl-spi";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 0>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+
+Example for a I2C device node:
+
+	lis331dlh: accelerometer@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 0000000000..d530ec041f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
new file mode 100644
index 0000000000..00c990caa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/murata,sca3300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata SCA3300 Accelerometer
+
+description: |
+  3-axis industrial accelerometer with digital SPI interface
+  https://www.murata.com/en-global/products/sensor/accel/sca3300
+
+maintainers:
+  - Tomas Melin <tomas.melin@vaisala.com>
+
+properties:
+  compatible:
+    enum:
+      - murata,sca3300
+      - murata,scl3300
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 8000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@0 {
+            compatible = "murata,sca3300";
+            reg = <0x0>;
+            spi-max-frequency = <4000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
new file mode 100644
index 0000000000..783c7ddfcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+  NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
+  SPI and I2C interface.
+    https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,fxls8962af
+      - nxp,fxls8964af
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+
+  drive-open-drain:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@62 {
+            compatible = "nxp,fxls8962af";
+            reg = <0x62>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "nxp,fxls8962af";
+            reg = <0>;
+            spi-max-frequency = <4000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
new file mode 100644
index 0000000000..2616017297
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IIO Common Properties for ADC Channels
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  A few properties are defined in a common way ADC channels.
+
+properties:
+  $nodename:
+    pattern: "^channel(@[0-9a-f]+)?$"
+    description:
+      A channel index should match reg.
+
+  reg:
+    maxItems: 1
+
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Unique name to identify which channel this is.
+
+  bipolar:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If provided, the channel is to be used in bipolar mode.
+
+  diff-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    minItems: 2
+    description:
+      Many ADCs have dual Muxes to allow different input pins to be routed
+      to both the positive and negative inputs of a differential ADC.
+      The first value specifies the positive input pin, the second
+      specifies the negative input pin.
+
+  settling-time-us:
+    description:
+      Time between enabling the channel and first stable readings.
+
+  oversampling-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Oversampling is used as replacement of or addition to the low-pass filter.
+      In some cases, the desired filtering characteristics are a function the
+      device design and can interact with other characteristics such as
+      settling time.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
new file mode 100644
index 0000000000..d00690a8d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4130 ADC device driver
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4130
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    description: |
+      Specify which interrupt pin should be configured as Data Ready / FIFO
+      interrupt.
+      Default if not supplied is int.
+    enum:
+      - int
+      - clk
+      - p2
+      - dout
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  refin1-supply:
+    description: refin1 supply. Can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply. Can be used as reference for conversion.
+
+  avdd-supply:
+    description: AVDD voltage supply. Can be used as reference for conversion.
+
+  iovdd-supply:
+    description: IOVDD voltage supply. Used for the chip interface.
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  adi,ext-clk-freq-hz:
+    description: Specify the frequency of the external clock.
+    enum: [76800, 153600]
+    default: 76800
+
+  adi,bipolar:
+    description: Specify if the device should be used in bipolar mode.
+    type: boolean
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9a-f])$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          Besides the analog inputs available, internal inputs can be used.
+          16: Internal temperature sensor.
+          17: AVSS
+          18: Internal reference
+          19: DGND
+          20: (AVDD − AVSS)/6+
+          21: (AVDD − AVSS)/6-
+          22: (IOVDD − DGND)/6+
+          23: (IOVDD − DGND)/6-
+          24: (ALDO − AVSS)/6+
+          25: (ALDO − AVSS)/6-
+          26: (DLDO − DGND)/6+
+          27: (DLDO − DGND)/6-
+          28: V_MV_P
+          29: V_MV_M
+        items:
+          minimum: 0
+          maximum: 29
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−)
+          1: REFIN2(+)/REFIN2(−)
+          2: REFOUT/AVSS (Internal reference)
+          3: AVDD/AVSS
+          If not specified, REFIN1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+      adi,excitation-pin-0:
+        description: |
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-pin-1:
+        description: |
+          Analog input to apply excitation current to while this channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-current-0-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,excitation-current-1-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,burnout-current-nanoamp:
+        description: |
+          Burnout current in nanoamps to be applied for this channel.
+        enum: [0, 500, 2000, 4000]
+        default: 0
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad4130";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi-max-frequency = <5000000>;
+        interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,reference-select = <2>;
+
+          /* AIN8, AIN9 */
+          diff-channels = <8 9>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,reference-select = <2>;
+
+          /* AIN10, AIN11 */
+          diff-channels = <10 11>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,reference-select = <2>;
+
+          /* Temperature Sensor, DGND */
+          diff-channels = <16 19>;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,reference-select = <2>;
+
+          /* Internal reference, DGND */
+          diff-channels = <18 19>;
+        };
+
+        channel@4 {
+          reg = <4>;
+
+          adi,reference-select = <2>;
+
+          /* DGND, DGND */
+          diff-channels = <19 19>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
new file mode 100644
index 0000000000..ce7ba63464
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Phandle to the vref power supply
+
+  interrupts:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@2f {
+            compatible = "adi,ad7091r5";
+            reg = <0x2f>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
new file mode 100644
index 0000000000..35ed04350e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7124 ADC device driver
+
+maintainers:
+  - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7124-4
+      - adi,ad7124-8
+
+  reg:
+    description: SPI chip select number for the device
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  refin1-supply:
+    description: refin1 supply can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply can be used as reference for conversion.
+
+  avdd-supply:
+    description: avdd supply can be used as reference for conversion.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    $ref: adc.yaml
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels on ad7124-4
+          and 16 channels on ad7124-8, numbered from 0 to 15.
+        items:
+          minimum: 0
+          maximum: 15
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−).
+          1: REFIN2(+)/REFIN2(−).
+          3: AVDD
+          If this field is left empty, internal reference is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3]
+
+      diff-channels: true
+
+      bipolar: true
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7124-4";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        interrupts = <25 2>;
+        interrupt-parent = <&gpio>;
+        refin1-supply = <&adc_vref>;
+        clocks = <&ad7124_mclk>;
+        clock-names = "mclk";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          diff-channels = <0 1>;
+          adi,reference-select = <0>;
+          adi,buffered-positive;
+        };
+
+        channel@1 {
+          reg = <1>;
+          bipolar;
+          diff-channels = <2 3>;
+          adi,reference-select = <0>;
+          adi,buffered-positive;
+          adi,buffered-negative;
+        };
+
+        channel@2 {
+          reg = <2>;
+          diff-channels = <4 5>;
+        };
+
+        channel@3 {
+          reg = <3>;
+          diff-channels = <6 7>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
new file mode 100644
index 0000000000..16def2985a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7192 ADC device driver
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7192 ADC device. Datasheet can be
+  found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7192.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7190
+      - adi,ad7192
+      - adi,ad7193
+      - adi,ad7195
+
+  reg:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  dvdd-supply:
+    description: DVdd voltage supply
+
+  avdd-supply:
+    description: AVdd voltage supply
+
+  vref-supply:
+    description: VRef voltage supply
+
+  adi,rejection-60-Hz-enable:
+    description: |
+      This bit enables a notch at 60 Hz when the first notch of the sinc
+      filter is at 50 Hz. When REJ60 is set, a filter notch is placed at
+      60 Hz when the sinc filter first notch is at 50 Hz. This allows
+      simultaneous 50 Hz/ 60 Hz rejection.
+    type: boolean
+
+  adi,refin2-pins-enable:
+    description: |
+      External reference applied between the P1/REFIN2(+) and P0/REFIN2(−) pins.
+    type: boolean
+
+  adi,buffer-enable:
+    description: |
+      Enables the buffer on the analog inputs. If cleared, the analog inputs
+      are unbuffered, lowering the power consumption of the device. If this
+      bit is set, the analog inputs are buffered, allowing the user to place
+      source impedances on the front end without contributing gain errors to
+      the system.
+    type: boolean
+
+  adi,burnout-currents-enable:
+    description: |
+      When this bit is set to 1, the 500 nA current sources in the signal
+      path are enabled. When BURN = 0, the burnout currents are disabled.
+      The burnout currents can be enabled only when the buffer is active
+      and when chop is disabled.
+    type: boolean
+
+  bipolar:
+    description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dvdd-supply
+  - avdd-supply
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7192";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7192_mclk>;
+            clock-names = "mclk";
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
+
+            adi,refin2-pins-enable;
+            adi,rejection-60-Hz-enable;
+            adi,buffer-enable;
+            adi,burnout-currents-enable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
new file mode 100644
index 0000000000..dfb8f305e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
new file mode 100644
index 0000000000..0b2f5dc806
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7291.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7291
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7291: adc@0 {
+        compatible = "adi,ad7291";
+        reg = <0>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
new file mode 100644
index 0000000000..2aa1f4b063
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7292 10-Bit Monitor and Control System
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+
+description: |
+  Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs,
+  Temperature Sensor, and GPIOs
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7292
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      The regulator supply for ADC and DAC reference voltage.
+
+  spi-cpha: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: adc.yaml
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels numbered from 0 to 7.
+        items:
+          - minimum: 0
+            maximum: 7
+
+      diff-channels: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7292: adc@0 {
+        compatible = "adi,ad7292";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        vref-supply = <&adc_vref>;
+        spi-cpha;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          diff-channels = <0 1>;
+        };
+        channel@2 {
+          reg = <2>;
+        };
+        channel@3 {
+          reg = <3>;
+        };
+        channel@4 {
+          reg = <4>;
+        };
+        channel@5 {
+          reg = <5>;
+        };
+        channel@6 {
+          reg = <6>;
+        };
+        channel@7 {
+          reg = <7>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
new file mode 100644
index 0000000000..cd8ac5162d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7298 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7298 ADC device. Datasheet can be
+  found here:
+    https://www.analog.com/en/products/ad7298.html
+
+properties:
+  compatible:
+    const: adi,ad7298
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7298";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
new file mode 100644
index 0000000000..44c671eeda
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7476.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7476 and similar simple SPI ADCs from multiple manufacturers.
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  A lot of simple SPI ADCs have very straight forward interfaces.
+  They typically don't provide a MOSI pin, simply reading out data
+  on MISO when the clock toggles.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091
+      - adi,ad7091r
+      - adi,ad7273
+      - adi,ad7274
+      - adi,ad7276
+      - adi,ad7277
+      - adi,ad7278
+      - adi,ad7466
+      - adi,ad7467
+      - adi,ad7468
+      - adi,ad7475
+      - adi,ad7476
+      - adi,ad7476a
+      - adi,ad7477
+      - adi,ad7477a
+      - adi,ad7478
+      - adi,ad7478a
+      - adi,ad7495
+      - adi,ad7910
+      - adi,ad7920
+      - adi,ad7940
+      - ti,adc081s
+      - ti,adc101s
+      - ti,adc121s
+      - ti,ads7866
+      - ti,ads7867
+      - ti,ads7868
+      - lltc,ltc2314-14
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Main powersupply voltage for the chips, sometimes referred to as VDD on
+      datasheets.  If there is no separate vref-supply, then this is needed
+      to establish channel scaling.
+
+  vdrive-supply:
+    description:
+      Some devices have separate supply for their digital control side.
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different pin
+      to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. ad7091r)
+
+  adi,conversion-start-gpios:
+    description: A GPIO used to trigger the start of a conversion
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # Devices where reference is vcc
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091
+              - adi,ad7276
+              - adi,ad7277
+              - adi,ad7278
+              - adi,ad7466
+              - adi,ad7467
+              - adi,ad7468
+              - adi,ad7940
+              - ti,adc081s
+              - ti,adc101s
+              - ti,adc121s
+              - ti,ads7866
+              - ti,ads7868
+    then:
+      required:
+        - vcc-supply
+  # Devices with a vref
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7475
+              - lltc,ltc2314-14
+    then:
+      properties:
+        vref-supply: true
+    else:
+      properties:
+        vref-supply: false
+  # Devices with a vref where it is not optional
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7475
+              - lltc,ltc2314-14
+    then:
+      required:
+        - vref-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7475
+              - adi,ad7495
+    then:
+      properties:
+        vdrive-supply: true
+    else:
+      properties:
+        vdrive-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091
+              - adi,ad7091r
+    then:
+      properties:
+        adi,conversion-start-gpios: true
+    else:
+      properties:
+        adi,conversion-start-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7091r";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vcc-supply = <&adc_vcc>;
+        vref-supply = <&adc_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
new file mode 100644
index 0000000000..7fa46df1f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7606 Simultaneous Sampling ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7606 Simultaneous Sampling ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7605-4
+      - adi,ad7606-8
+      - adi,ad7606-6
+      - adi,ad7606-4
+      - adi,ad7606b
+      - adi,ad7616
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  avcc-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  adi,conversion-start-gpios:
+    description:
+      Must be the device tree identifier of the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. If specified,
+      it will be asserted during driver probe. As the line is active high,
+      it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+      Must be the device tree identifier of the STBY pin. This pin is used
+      to place the AD7606 into one of two power-down modes, Standby mode or
+      Shutdown mode. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,first-data-gpios:
+    description:
+      Must be the device tree identifier of the FRSTDATA pin.
+      The FRSTDATA output indicates when the first channel, V1, is
+      being read back on either the parallel, byte or serial interface.
+      As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,range-gpios:
+    description:
+      Must be the device tree identifier of the RANGE pin. The polarity on
+      this pin determines the input range of the analog input channels. If
+      this pin is tied to a logic high, the analog input range is ±10V for
+      all channels. If this pin is tied to a logic low, the analog input range
+      is ±5V for all channels. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,oversampling-ratio-gpios:
+    description:
+      Must be the device tree identifier of the over-sampling
+      mode pins. As the line is active high, it should be marked
+      GPIO_ACTIVE_HIGH.
+    maxItems: 3
+
+  adi,sw-mode:
+    description:
+      Software mode of operation, so far available only for ad7616 and ad7606b.
+      It is enabled when all three oversampling mode pins are connected to
+      high level. The device is configured by the corresponding registers. If the
+      adi,oversampling-ratio-gpios property is defined, then the driver will set the
+      oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired
+      to VDD.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - avcc-supply
+  - interrupts
+  - adi,conversion-start-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606-8";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+
+            avcc-supply = <&adc_vref>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 26 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+            adi,sw-mode;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
new file mode 100644
index 0000000000..3ce59d4d06
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7768-1 ADC device driver
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Datasheet at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+
+properties:
+  compatible:
+    const: adi,ad7768-1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vref-supply:
+    description:
+      ADC reference voltage supply
+
+  adi,sync-in-gpios:
+    maxItems: 1
+    description:
+      Enables synchronization of multiple devices that require simultaneous
+      sampling. A pulse is always required if the configuration is changed
+      in any way, for example if the filter decimation rate changes.
+      As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+  - adi,sync-in-gpios
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          The channel number.
+
+      label:
+        description: |
+          Unique name to identify which channel this is.
+    required:
+      - reg
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7768-1";
+            reg = <0>;
+            spi-max-frequency = <2000000>;
+            spi-cpol;
+            spi-cpha;
+            vref-supply = <&adc_vref>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+            adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            clocks = <&ad7768_mclk>;
+            clock-names = "mclk";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                label = "channel_0";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
new file mode 100644
index 0000000000..5fcc8dd012
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The ad7780 is a sigma-delta analog to digital converter. This driver provides
+  reading voltage values and status bits from both the ad778x and ad717x series.
+  Its interface also allows writing on the FILTER and GAIN GPIO pins on the
+  ad778x.
+
+  Specifications on the converters can be found at:
+    AD7170:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+    AD7171:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+    AD7780:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+    AD7781:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7170
+      - adi,ad7171
+      - adi,ad7780
+      - adi,ad7781
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  powerdown-gpios:
+    description:
+      Must be the device tree identifier of the PDRST pin. If
+      specified, it will be asserted during driver probe. As the
+      line is active high, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,gain-gpios:
+    description:
+      Must be the device tree identifier of the GAIN pin. Only for
+      the ad778x chips. If specified, it will be asserted during
+      driver probe. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,filter-gpios:
+    description:
+      Must be the device tree identifier of the FILTER pin. Only
+      for the ad778x chips. If specified, it will be asserted
+      during driver probe. As the line is active low, it should be
+      marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7780";
+            reg = <0>;
+
+            avdd-supply      = <&vdd_supply>;
+            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
new file mode 100644
index 0000000000..85148338c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7923.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
+   AD7918, AD7927, AD7928 8 Channels ADCs.
+
+  Specifications about the part can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7904_7914_7924.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7908_7918_7928.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,ad7904
+          - adi,ad7908
+          - adi,ad7914
+          - adi,ad7918
+          - adi,ad7923
+          - adi,ad7928
+      - const: adi,ad7924
+        deprecated: true
+      - items:
+          - const: adi,ad7924
+          - const: adi,ad7923
+      - items:
+          - const: adi,ad7927
+          - const: adi,ad7928
+
+  reg:
+    maxItems: 1
+
+  refin-supply:
+    description: |
+      The regulator supply for ADC reference voltage.
+
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7928: adc@0 {
+        compatible = "adi,ad7928";
+        reg = <0>;
+        spi-max-frequency = <25000000>;
+        refin-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
new file mode 100644
index 0000000000..9ee4d977c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7949.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7949/AD7682/AD7689 analog to digital converters
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+description: |
+  Specifications on the converters can be found at:
+    AD7949:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
+    AD7682/AD7698:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7682
+      - adi,ad7689
+      - adi,ad7949
+
+  reg:
+    maxItems: 1
+
+  vrefin-supply:
+    description:
+      Buffered ADC reference voltage supply.
+
+  vref-supply:
+    description:
+      Unbuffered ADC reference voltage supply.
+
+  adi,internal-ref-microvolt:
+    description: |
+      Internal reference voltage selection in microvolts.
+
+      If no internal reference is specified, the channel will default to the
+      external reference defined by vrefin-supply (or vref-supply).
+      vrefin-supply will take precedence over vref-supply if both are defined.
+
+      If no supplies are defined, the reference selection will default to
+      4096mV internal reference.
+
+    enum: [2500000, 4096000]
+    default: 4096000
+
+
+  '#io-channel-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+        };
+
+        adc@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <1>;
+            vrefin-supply = <&vdd_supply>;
+        };
+
+        adc@2 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <2>;
+            adi,internal-ref-microvolt = <4096000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
new file mode 100644
index 0000000000..433ed2c929
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad799x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD799x analog to digital converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+description: |
+    Support for Analog Devices AD7991, AD7992, AD7993, AD7994, AD7995, AD7997, AD7998,
+    AD7999 and similar analog to digital converters.
+    Specifications on the converters can be found at:
+    AD7991, AD7995, AD7999:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7991_7995_7999.pdf
+    AD7992:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7992.pdf
+    AD7993, AD7994:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7993_7994.pdf
+    AD7997, AD7998:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7997_7998.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7991
+      - adi,ad7992
+      - adi,ad7993
+      - adi,ad7994
+      - adi,ad7995
+      - adi,ad7997
+      - adi,ad7998
+      - adi,ad7999
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      ADC power supply
+
+  vref-supply:
+    description:
+      ADC reference voltage supply, optional for AD7991, AD7995 and AD7999
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc1: adc@28 {
+            reg = <0x28>;
+            compatible = "adi,ad7991";
+            interrupts = <13 2>;
+            interrupt-parent = <&gpio6>;
+
+            vcc-supply = <&vcc_3v3>;
+            vref-supply = <&adc_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
new file mode 100644
index 0000000000..7aa748d6b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9467 and similar High-Speed ADCs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The AD9467 and the parts similar with it, are high-speed analog-to-digital
+  converters (ADCs), operating in the range of 100 to 500 mega samples
+  per second (MSPS). Some parts support higher MSPS and some
+  lower MSPS, suitable for the intended application of each part.
+
+  All the parts support the register map described by Application Note AN-877
+   https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9265.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD9467.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9265
+      - adi,ad9434
+      - adi,ad9467
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  powerdown-gpios:
+    description:
+      Pin that controls the powerdown mode of the device.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reset pin for the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad9467";
+            reg = <0>;
+            clocks = <&adc_clk>;
+            clock-names = "adc-clk";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
new file mode 100644
index 0000000000..9996dd93f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI ADC IP core
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual ADC, while this IP core will interface
+  to the data-lines of the ADC and handle the streaming of data into
+  memory via DMA.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-adc-10.0.a
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  adi,adc-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A reference to a the actual ADC to which this FPGA ADC interfaces to.
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - adi,adc-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-adc@44a00000 {
+        compatible = "adi,axi-adc-10.0.a";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
+
+        adi,adc-dev = <&spi_adc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
new file mode 100644
index 0000000000..53f9feff13
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX11410 ADC device driver
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
+  found here:
+    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max11410
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Name of the gpio pin of max11410 used for IRQ
+    minItems: 1
+    items:
+      - enum: [gpio0, gpio1]
+      - const: gpio1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avdd-supply:
+    description: Optional avdd supply. Used as reference when no explicit reference supplied.
+
+  vref0p-supply:
+    description: vref0p supply can be used as reference for conversion.
+
+  vref1p-supply:
+    description: vref1p supply can be used as reference for conversion.
+
+  vref2p-supply:
+    description: vref2p supply can be used as reference for conversion.
+
+  vref0n-supply:
+    description: vref0n supply can be used as reference for conversion.
+
+  vref1n-supply:
+    description: vref1n supply can be used as reference for conversion.
+
+  vref2n-supply:
+    description: vref2n supply can be used as reference for conversion.
+
+  spi-max-frequency:
+    maximum: 8000000
+
+patternProperties:
+  "^channel(@[0-9])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended mode.
+        minimum: 0
+        maximum: 9
+
+      adi,reference:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: VREF0P/VREF0N
+          1: VREF1P/VREF1N
+          2: VREF2P/VREF2N
+          3: AVDD/AGND
+          4: VREF0P/AGND
+          5: VREF1P/AGND
+          6: VREF2P/AGND
+          If this field is left empty, AVDD/AGND is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 3
+
+      adi,input-mode:
+        description: |
+          Select signal path of input channels. Valid values are:
+          0: Buffered, low-power, unity-gain path (default)
+          1: Bypass path
+          2: PGA path
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      diff-channels: true
+
+      bipolar: true
+
+      settling-time-us: true
+
+      adi,buffered-vrefp:
+        description: Enable buffered mode for positive reference.
+        type: boolean
+
+      adi,buffered-vrefn:
+        description: Enable buffered mode for negative reference.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "adi,max11410";
+            spi-max-frequency = <8000000>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gpio1";
+
+            avdd-supply = <&adc_avdd>;
+
+            vref1p-supply = <&adc_vref1p>;
+            vref1n-supply = <&adc_vref1n>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <2 3>;
+                adi,reference = <1>;
+                bipolar;
+                settling-time-us = <100000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                diff-channels = <7 9>;
+                adi,reference = <5>;
+                adi,input-mode = <2>;
+                settling-time-us = <50000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
new file mode 100644
index 0000000000..7ef46c90eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 General Purpose ADC
+
+maintainers:
+  - Maksim Kiselev <bigunclemax@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 15
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - "#io-channel-cells"
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-ccu.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpadc: adc@2009000 {
+        compatible = "allwinner,sun20i-d1-gpadc";
+        reg = <0x2009000 0x400>;
+        clocks = <&ccu CLK_BUS_GPADC>;
+        resets = <&ccu RST_BUS_GPADC>;
+        interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+        #io-channel-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
new file mode 100644
index 0000000000..a73a355fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A33 Thermal Sensor
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#io-channel-cells":
+    const: 0
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun8i-a33-ths
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#io-channel-cells"
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ths: ths@1c25000 {
+        compatible = "allwinner,sun8i-a33-ths";
+        reg = <0x01c25000 0x100>;
+        #thermal-sensor-cells = <0>;
+        #io-channel-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
new file mode 100644
index 0000000000..7e8328e9ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/amlogic,meson-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SAR (Successive Approximation Register) A/D converter
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description:
+  Binding covers a range of ADCs found on Amlogic Meson SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-saradc
+      - items:
+          - enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+              - amlogic,meson-gxbb-saradc
+              - amlogic,meson-gxl-saradc
+              - amlogic,meson-gxm-saradc
+              - amlogic,meson-axg-saradc
+              - amlogic,meson-g12a-saradc
+          - const: amlogic,meson-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt indicates end of sampling.
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: clkin
+      - const: core
+      - const: adc_clk
+      - const: adc_sel
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+  amlogic,hhi-sysctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon which contains the 5th bit of the TSC (temperature sensor
+      coefficient) on Meson8b and Meson8m2 (which used to calibrate the
+      temperature sensor)
+
+  nvmem-cells:
+    description: phandle to the temperature_calib eFuse cells
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: temperature_calib
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-saradc
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        nvmem-cells: false
+        mvmem-cel-names: false
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8b-saradc
+              - amlogic,meson8m2-saradc
+    then:
+      properties:
+        amlogic,hhi-sysctrl: true
+    else:
+      properties:
+        amlogic,hhi-sysctrl: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@8680 {
+            compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x8680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>,
+                <&clkc CLKID_SAR_ADC>,
+                <&clkc CLKID_SAR_ADC_CLK>,
+                <&clkc CLKID_SAR_ADC_SEL>;
+            clock-names = "clkin", "core", "adc_clk", "adc_sel";
+        };
+        adc@9680 {
+            compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+            #io-channel-cells = <1>;
+            reg = <0x0 0x9680 0x0 0x34>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+            clock-names = "clkin", "core";
+            nvmem-cells = <&tsens_caldata>;
+            nvmem-cell-names = "temperature_calib";
+            amlogic,hhi-sysctrl = <&hhi>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
new file mode 100644
index 0000000000..a726b6c2ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2400-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description:
+  This device is a 10-bit converter for 16 voltage channels.  All inputs are
+  single ended.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-adc
+      - aspeed,ast2500-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    adc@1e6e9000 {
+        compatible = "aspeed,ast2400-adc";
+        reg = <0x1e6e9000 0xb0>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
new file mode 100644
index 0000000000..5c08d8b6e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  • 10-bits resolution for 16 voltage channels.
+  • The device split into two individual engine and each contains 8 voltage
+  channels.
+  • Channel scanning can be non-continuous.
+  • Programmable ADC clock frequency.
+  • Programmable upper and lower threshold for each channels.
+  • Interrupt when larger or less than threshold for each channels.
+  • Support hysteresis for each channels.
+  • Built-in a compensating method.
+  • Built-in a register to trim internal reference voltage.
+  • Internal or External reference voltage.
+  • Support 2 Internal reference voltage 1.2v or 2.5v.
+  • Integrate dividing circuit for battery sensing.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-adc0
+      - aspeed,ast2600-adc1
+    description:
+      Their trimming data, which is used to calibrate internal reference volage,
+      locates in different address of OTP.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description:
+      The external regulator supply ADC reference voltage.
+
+  aspeed,int-vref-microvolt:
+    enum: [1200000, 2500000]
+    description:
+      ADC internal reference voltage in microvolts.
+
+  aspeed,battery-sensing:
+    type: boolean
+    description:
+      Inform the driver that last channel will be used to sensor battery.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    adc0: adc@1e6e9000 {
+        compatible = "aspeed,ast2600-adc0";
+        reg = <0x1e6e9000 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+    adc1: adc@1e6e9100 {
+        compatible = "aspeed,ast2600-adc1";
+        reg = <0x1e6e9100 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
new file mode 100644
index 0000000000..4817b84097
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama5d2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-adc
+      - microchip,sam9x60-adc
+      - microchip,sama7g5-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc_clk
+
+  vref-supply: true
+  vddana-supply: true
+
+  atmel,min-sample-rate-hz:
+    description: Minimum sampling rate, it depends on SoC.
+
+  atmel,max-sample-rate-hz:
+    description: Maximum sampling rate, it depends on SoC.
+
+  atmel,startup-time-ms:
+    description: Startup time expressed in ms, it depends on SoC.
+
+  atmel,trigger-edge-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      One of possible edge types for the ADTRG hardware trigger pin.
+      When the specific edge type is detected, the conversion will
+      start. Should be one of IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING
+      or IRQ_TYPE_EDGE_BOTH.
+    enum: [1, 2, 3]
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - vddana-supply
+  - atmel,min-sample-rate-hz
+  - atmel,max-sample-rate-hz
+  - atmel,startup-time-ms
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fc030000 {
+            compatible = "atmel,sama5d2-adc";
+            reg = <0xfc030000 0x100>;
+            interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+            clocks = <&adc_clk>;
+            clock-names = "adc_clk";
+            atmel,min-sample-rate-hz = <200000>;
+            atmel,max-sample-rate-hz = <20000000>;
+            atmel,startup-time-ms = <4>;
+            vddana-supply = <&vdd_3v3_lp_reg>;
+            vref-supply = <&vdd_3v3_lp_reg>;
+            atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+            dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+            dma-names = "rx";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
new file mode 100644
index 0000000000..1f30a85691
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-adc
+      - atmel,at91sam9rl-adc
+      - atmel,at91sam9g45-adc
+      - atmel,at91sam9x5-adc
+      - atmel,at91sama5d3-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: adc_clk
+      - const: adc_op_clk
+
+  atmel,adc-channels-used:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bitmask of the channels muxed and enabled for this device
+
+  atmel,adc-startup-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Startup Time of the ADC in microseconds as defined in the datasheet
+
+  atmel,adc-vref:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference voltage in millivolts for the conversions
+
+  atmel,adc-use-external-triggers:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable the external triggers
+
+  atmel,adc-use-res:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      String corresponding to an identifier from atmel,adc-res-names property.
+      If not specified, the highest resolution will be used.
+    enum:
+      - lowres
+      - highres
+
+  atmel,adc-sleep-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable sleep mode when no conversion
+
+  atmel,adc-sample-hold-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sample and Hold Time in microseconds
+
+  atmel,adc-ts-wires:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of touchscreen wires. Must be set to enable touchscreen.
+      NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
+      disabled. Since touchscreen will occupy the trigger register.
+    enum:
+      - 4
+      - 5
+
+  atmel,adc-ts-pressure-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Pressure threshold for touchscreen.
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - atmel,adc-channels-used
+  - atmel,adc-startup-time
+  - atmel,adc-vref
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc@fffb0000 {
+            compatible = "atmel,at91sam9260-adc";
+            reg = <0xfffb0000 0x100>;
+            interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&adc_clk>, <&adc_op_clk>;
+            clock-names = "adc_clk", "adc_op_clk";
+            atmel,adc-channels-used = <0xff>;
+            atmel,adc-startup-time = <40>;
+            atmel,adc-use-external-triggers;
+            atmel,adc-vref = <3300>;
+            atmel,adc-use-res = "lowres";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
new file mode 100644
index 0000000000..9c57eb13f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AVIA HX711 ADC chip for weight cells
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using two GPIOs:
+  - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
+    and up to 3 cycles for selection of the input channel and gain for the
+    next measurement
+  - dout-gpio is the sensor data the sensor responds to the clock
+
+  Specifications about the driver can be found at:
+  http://www.aviaic.com/ENProducts.aspx
+
+properties:
+  compatible:
+    enum:
+      - avia,hx711
+
+  sck-gpios:
+    description:
+      Definition of the GPIO for the clock (output). In the datasheet it is
+      named PD_SCK
+    maxItems: 1
+
+  dout-gpios:
+    description:
+      Definition of the GPIO for the data-out sent by the sensor in
+      response to the clock (input).
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog supply
+
+  clock-frequency:
+    minimum: 20000
+    maximum: 2500000
+    default: 400000
+
+required:
+  - compatible
+  - sck-gpios
+  - dout-gpios
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    weight {
+        compatible = "avia,hx711";
+        sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+        dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+        avdd-supply = <&avdd>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
new file mode 100644
index 0000000000..547697e8bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/brcm,iproc-static-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's IPROC Static ADC controller
+
+maintainers:
+  - Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
+
+description: |
+  Broadcom iProc ADC controller has 8 10bit channels
+
+properties:
+  compatible:
+    const: brcm,iproc-static-adc
+
+  adc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      syscon node defining physical base address of the controller and length
+      of memory mapped region.
+
+  "#io-channel-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tsc_clk
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - adc-syscon
+  - "#io-channel-cells"
+  - clocks
+  - clock-names
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-cygnus.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        adc {
+            compatible = "brcm,iproc-static-adc";
+            adc-syscon = <&ts_adc_syscon>;
+            #io-channel-cells = <1>;
+            clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+            clock-names = "tsc_clk";
+            interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
new file mode 100644
index 0000000000..6d4fb3e1d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP930x internal ADC
+
+description: |
+  Cirrus Logic EP9301/EP9302 SoCs' internal ADC block.
+
+  User's manual:
+  https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+properties:
+  compatible:
+    const: cirrus,ep9301-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    adc: adc@80900000 {
+        compatible = "cirrus,ep9301-adc";
+        reg = <0x80900000 0x28>;
+        clocks = <&syscon 24>;
+        interrupt-parent = <&vic1>;
+        interrupts = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
new file mode 100644
index 0000000000..4e695b97d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cosmic Circuits CC-10001 ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Cosmic Circuits 10001 10-bit ADC device.
+
+properties:
+  compatible:
+    const: cosmic,10001-adc
+
+  reg:
+    maxItems: 1
+
+  adc-reserved-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask of reserved channels, i.e. channels that cannot be
+      used by the OS.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    adc@18101600 {
+        compatible = "cosmic,10001-adc";
+        reg = <0x18101600 0x24>;
+        adc-reserved-channels = <0x2>;
+        clocks = <&adc_clk>;
+        clock-names = "adc";
+        vref-supply = <&reg_1v8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml
new file mode 100644
index 0000000000..cc29a2f211
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/dlg,da9150-gpadc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/dlg,da9150-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 IIO GPADC
+
+maintainers:
+  - Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+
+description:
+  This patch adds support for general purpose ADC within the
+  DA9150 Charger & Fuel-Gauge IC.
+
+properties:
+  compatible:
+    const: dlg,da9150-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "dlg,da9150-gpadc";
+        #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml b/Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml
new file mode 100644
index 0000000000..296d5459b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/envelope-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC envelope detector using a DAC and a comparator
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  The DAC is used to find the peak level of an alternating voltage input
+  signal by a binary search using the output of a comparator wired to
+  an interrupt pin. Like so:
+                          _
+                         | \
+    input +------>-------|+ \
+                         |   \
+           .-------.     |    }---.
+           |       |     |   /    |
+           |    dac|-->--|- /     |
+           |       |     |_/      |
+           |       |              |
+           |       |              |
+           |    irq|------<-------'
+           |       |
+           '-------'
+
+properties:
+  compatible:
+    const: axentia,tse850-envelope-detector
+
+  io-channels:
+    maxItems: 1
+    description: Channel node of the dac to be used for comparator input.
+
+  io-channel-names:
+    const: dac
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: comp
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dpot: dpot@28 {
+            compatible = "microchip,mcp4651-104";
+            reg = <0x28>;
+            #io-channel-cells = <1>;
+        };
+    };
+
+    dac: dac {
+        compatible = "dpot-dac";
+        vref-supply = <&reg_3v3>;
+        io-channels = <&dpot 0>;
+        io-channel-names = "dpot";
+        #io-channel-cells = <1>;
+    };
+
+    envelope-detector {
+        compatible = "axentia,tse850-envelope-detector";
+        io-channels = <&dac 0>;
+        io-channel-names = "dac";
+
+        interrupt-parent = <&gpio>;
+        interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "comp";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
new file mode 100644
index 0000000000..e9103497e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC GCQ device
+
+description:
+  This is a generic conversion queue device that can convert any of the
+  analog inputs using the ADC unit of the i.MX25.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: fsl,imx25-gcq
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-ext-supply:
+    description:
+      The regulator supplying the ADC reference voltage.
+      Required when at least one subnode uses the this reference.
+
+  vref-xp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin XP.
+      Required when at least one subnode uses this reference.
+
+  vref-yp-supply:
+    description:
+      The regulator supplying the ADC reference voltage on pin YP.
+      Required when at least one subnode uses this reference.
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "[a-z][a-z0-9]+@[0-9a-f]+$":
+    type: object
+    description:
+      Child nodes used to define the reference voltages used for each channel
+
+    properties:
+      reg:
+        description: |
+          Number of the analog input.
+          0: xp
+          1: yp
+          2: xn
+          3: yn
+          4: wiper
+          5: inaux0
+          6: inaux1
+          7: inaux2
+        items:
+          - minimum: 0
+            maximum: 7
+
+      fsl,adc-refp:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the positive reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: YP voltage reference
+          1: XP voltage reference
+          2: External voltage reference
+          3: Internal voltage reference (default)
+        minimum: 0
+        maximum: 3
+
+      fsl,adc-refn:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Specifies the negative reference input as defined in
+          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+          0: XN ground reference
+          1: YN ground reference
+          2: Internal ground reference
+          3: External ground reference (default)
+        minimum: 0
+        maximum: 3
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@50030800 {
+            compatible = "fsl,imx25-gcq";
+            reg = <0x50030800 0x60>;
+            interrupt-parent = <&tscadc>;
+            interrupts = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            inaux@5 {
+                reg = <5>;
+                fsl,adc-refp = <MX25_ADC_REFP_INT>;
+                fsl,adc-refn = <MX25_ADC_REFN_NGND>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
new file mode 100644
index 0000000000..afc5cc48a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,imx7d-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale ADC found on the imx7d SoC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx7d-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@30610000 {
+            compatible = "fsl,imx7d-adc";
+            reg = <0x30610000 0x10000>;
+            interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+            clock-names = "adc";
+            vref-supply = <&reg_vcc_3v3_mcu>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
new file mode 100644
index 0000000000..c770ff4998
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC found on Freescale vf610 and similar SoCs
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sx-adc
+              - fsl,imx6ul-adc
+          - const: fsl,vf610-adc
+      - items:
+          - const: fsl,vf610-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: ADC source clock (ipg clock)
+    maxItems: 1
+
+  clock-names:
+    const: adc
+
+  vref-supply:
+    description: ADC reference voltage supply.
+
+  fsl,adck-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    description: |
+      Maximum frequencies from datasheet operating requirements.
+      Three values necessary to cover the 3 conversion modes.
+      * Frequency in normal mode (ADLPC=0, ADHSC=0)
+      * Frequency in high-speed mode (ADLPC=0, ADHSC=1)
+      * Frequency in low-power mode (ADLPC=1, ADHSC=0)
+
+  min-sample-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Minimum sampling time in nanoseconds. This value has
+      to be chosen according to the conversion mode and the connected analog
+      source resistance (R_as) and capacitance (C_as). Refer the datasheet's
+      operating requirements. A safe default across a wide range of R_as and
+      C_as as well as conversion modes is 1000ns.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+    adc@4003b000 {
+        compatible = "fsl,vf610-adc";
+        reg = <0x4003b000 0x1000>;
+        interrupts = <0 53 0x04>;
+        clocks = <&clks VF610_CLK_ADC0>;
+        clock-names = "adc";
+        fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>;
+        vref-supply = <&reg_vcc_3v3_mcu>;
+        min-sample-time = <10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
new file mode 100644
index 0000000000..56bcbe5dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/holt,hi8435.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Holt Integrated Circuits HI-8435 SPI threshold detector
+
+maintainers:
+  - Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+
+description: |
+  Datasheet: http://www.holtic.com/documents/427-hi-8435_v-rev-lpdf.do
+
+properties:
+  compatible:
+    const: holt,hi8435
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    description:
+      GPIO used for controlling the reset pin
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        threshold-detector@0 {
+            compatible = "holt,hi8435";
+            reg = <0>;
+            gpios = <&gpio6 1 0>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
new file mode 100644
index 0000000000..9cd0fd5397
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx ADC controller IIO
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Industrial I/O subsystem bindings for ADC controller found in
+  Ingenic JZ47xx SoCs.
+
+  ADC clients must use the format described in
+  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml,
+  giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4725b-adc
+      - ingenic,jz4740-adc
+      - ingenic,jz4760-adc
+      - ingenic,jz4760b-adc
+      - ingenic,jz4770-adc
+
+  '#io-channel-cells':
+    const: 1
+    description:
+      Must be set to <1> to indicate channels are selected by index.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc
+
+  interrupts:
+    maxItems: 1
+
+  ingenic,use-internal-divider:
+    description:
+      If present, battery voltage is read from the VBAT_IR pin, which has an
+      internal 1/4 divider. If absent, it is read through the VBAT_ER pin,
+      which does not have such a divider.
+    type: boolean
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: ingenic,jz4760b-adc
+then:
+  properties:
+    ingenic,use-internal-divider: false
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    adc@10070000 {
+        compatible = "ingenic,jz4740-adc";
+        #io-channel-cells = <1>;
+
+        reg = <0x10070000 0x30>;
+
+        clocks = <&cgu JZ4740_CLK_ADC>;
+        clock-names = "adc";
+
+        interrupt-parent = <&intc>;
+        interrupts = <18>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
new file mode 100644
index 0000000000..5207c919ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2496 ADC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Stefan Popa <stefan.popa@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2496
+
+  vref-supply:
+    description: Power supply for the reference voltage
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - vref-supply
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "lltc,ltc2496";
+            reg = <0>;
+            vref-supply = <&ltc2496_reg>;
+            spi-max-frequency = <2000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
new file mode 100644
index 0000000000..875f394576
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2497 ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  16bit ADC supporting up to 16 single ended or 8 differential inputs.
+  I2C interface.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2497
+      - lltc,ltc2499
+
+  reg: true
+  vref-supply: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@76 {
+            compatible = "lltc,ltc2497";
+            reg = <0x76>;
+            vref-supply = <&ltc2497_reg>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
new file mode 100644
index 0000000000..b3b292fb1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/marvell,berlin2-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/marvell,berlin2-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Berlin 2 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Antoine Tenart <antoine.tenart@free-electrons.com>
+
+description:
+  The Berlin ADC has 8 channels, with one connected to a temperature sensor.
+  It is part of the system controller register set. The ADC node should be a
+  sub-node of the system controller node.
+
+properties:
+  compatible:
+    const: marvell,berlin2-adc
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: adc
+      - const: tsen
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sysctrl {
+        adc {
+            compatible = "marvell,berlin2-adc";
+            interrupt-parent = <&sic>;
+            interrupts = <12>, <14>;
+            interrupt-names = "adc", "tsen";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
new file mode 100644
index 0000000000..e4b3621135
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1027.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1027 and similar ADCs
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Philippe Reynes <tremyfr@yahoo.fr>
+
+description: |
+  300ks/s SPI ADCs with temperature sensors.
+
+properties:
+  compatible:
+    enum:
+        # 10-bit 8 channels
+      - maxim,max1027
+        # 10-bit 12 channels
+      - maxim,max1029
+        # 10-bit 16 channels
+      - maxim,max1031
+         # 12-bit 8 channels
+      - maxim,max1227
+         # 12-bit 12 channels
+      - maxim,max1229
+         # 12-bit 16 channels
+      - maxim,max1231
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        maxadc: adc@0 {
+            compatible = "maxim,max1027";
+            reg = <0>;
+            #io-channel-cells = <1>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
new file mode 100644
index 0000000000..4f74cb3338
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11100 ADC
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+    Single channel 16 bit ADC with SPI interface.
+
+properties:
+  compatible:
+    const: maxim,max11100
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling.
+
+  spi-max-frequency:
+    minimum: 100000
+    maximum: 4800000
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max11100";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <240000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
new file mode 100644
index 0000000000..bb336e33eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1118.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1118 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+    Dual channel 8bit ADCs.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1117
+      - maxim,max1118
+      - maxim,max1119
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1118";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 0000000000..5f9e043cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
new file mode 100644
index 0000000000..60d7b34e32
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1238 and similar ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Family of simple ADCs with i2c interface and internal references.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1036
+      - maxim,max1037
+      - maxim,max1038
+      - maxim,max1039
+      - maxim,max1136
+      - maxim,max1137
+      - maxim,max1138
+      - maxim,max1139
+      - maxim,max1236
+      - maxim,max1237
+      - maxim,max1238
+      - maxim,max1239
+      - maxim,max11600
+      - maxim,max11601
+      - maxim,max11602
+      - maxim,max11603
+      - maxim,max11604
+      - maxim,max11605
+      - maxim,max11606
+      - maxim,max11607
+      - maxim,max11608
+      - maxim,max11609
+      - maxim,max11610
+      - maxim,max11611
+      - maxim,max11612
+      - maxim,max11613
+      - maxim,max11614
+      - maxim,max11615
+      - maxim,max11616
+      - maxim,max11617
+      - maxim,max11644
+      - maxim,max11645
+      - maxim,max11646
+      - maxim,max11647
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+  vref-supply:
+    description: Optional external reference.  If not supplied, internal
+      reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@36 {
+            compatible = "maxim,max1238";
+            reg = <0x36>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
new file mode 100644
index 0000000000..ef8d51e74c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. Datasheet
+  can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Device tree identifier of the regulator that powers the ADC.
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+
+  shutdown-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vdd-supply = <&adc_vdd>;
+            vref-supply = <&adc_vref>;
+            spi-max-frequency = <1000000>;
+            shutdown-gpios = <&gpio 26 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
new file mode 100644
index 0000000000..96f3f535fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1363 and similar ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+   Family of ADCs with i2c interface, internal references and threshold
+   monitoring.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1361
+      - maxim,max1362
+      - maxim,max1363
+      - maxim,max1364
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+  vref-supply:
+    description: Optional external reference.  If not supplied, internal
+      reference will be used.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@36 {
+            compatible = "maxim,max1363";
+            reg = <0x36>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
new file mode 100644
index 0000000000..95774a5562
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+   These devices combine a high-side current sense amplifier with a 12 bit ADC.
+   They have an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max9611
+      - maxim,max9612
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value in micro Ohms of the shunt resistor connected between the RS+ and
+      RS- inputs, across which the current is measured.  Value needed to compute
+      the scaling of the measured current.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@7c {
+            compatible = "maxim,max9611";
+            reg = <0x7c>;
+            shunt-resistor-micro-ohms = <5000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
new file mode 100644
index 0000000000..6168b44ea7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt2701-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AUXADC - ADC on Mediatek mobile SoC (mt65xx/mt81xx/mt27xx)
+
+maintainers:
+  - Zhiyong Tao <zhiyong.tao@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+  in some Mediatek SoCs which among other things measures the temperatures
+  in the SoC. It can be used directly with register accesses, but it is also
+  used by thermal controller which reads the temperatures from the AUXADC
+  directly via its own bus interface. See mediatek-thermal bindings
+  for the Thermal Controller which holds a phandle to the AUXADC.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-auxadc
+          - mediatek,mt2712-auxadc
+          - mediatek,mt6765-auxadc
+          - mediatek,mt7622-auxadc
+          - mediatek,mt7986-auxadc
+          - mediatek,mt8173-auxadc
+      - items:
+          - enum:
+              - mediatek,mt7623-auxadc
+          - const: mediatek,mt2701-auxadc
+      - items:
+          - enum:
+              - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
+              - mediatek,mt8188-auxadc
+              - mediatek,mt8195-auxadc
+              - mediatek,mt8516-auxadc
+          - const: mediatek,mt8173-auxadc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: main
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#io-channel-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adc@11001000 {
+            compatible = "mediatek,mt8183-auxadc",
+                         "mediatek,mt8173-auxadc";
+            reg = <0 0x11001000 0 0x1000>;
+            clocks = <&infracfg CLK_INFRA_AUXADC>;
+            clock-names = "main";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
new file mode 100644
index 0000000000..db4e3613c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6360-adc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6360-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6360 and similar ADCs
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt6360-adc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+      compatible = "mediatek,mt6360-adc";
+      #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
new file mode 100644
index 0000000000..18108f0f37
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp3201 and similar ADCs
+
+maintainers:
+  - Oskar Andero <oskar.andero@gmail.com>
+
+description: |
+   Family of simple ADCs with a SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3001
+      - microchip,mcp3002
+      - microchip,mcp3004
+      - microchip,mcp3008
+      - microchip,mcp3201
+      - microchip,mcp3202
+      - microchip,mcp3204
+      - microchip,mcp3208
+      - microchip,mcp3301
+      - microchip,mcp3550-50
+      - microchip,mcp3550-60
+      - microchip,mcp3551
+      - microchip,mcp3553
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+  vref-supply:
+    description: External reference.
+
+  "#io-channel-cells":
+    const: 1
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3002";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            #io-channel-cells = <1>;
+        };
+        adc@1 {
+            compatible = "microchip,mcp3002";
+            reg = <1>;
+            vref-supply = <&vref_reg>;
+            spi-max-frequency = <1500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
new file mode 100644
index 0000000000..f7b3fde411
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP3911 Dual channel analog front end (ADC)
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+  - Kent Gustavsson <nedo80@gmail.com>
+
+description: |
+  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
+  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3911
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  clocks:
+    description: |
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
+  microchip,device-addr:
+    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+
+  vref-supply:
+    description: |
+      Phandle to the external reference voltage supply.
+      If not specified, the internal voltage reference (1.2V) will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "microchip,mcp3911";
+        reg = <0>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <15 2>;
+        spi-max-frequency = <20000000>;
+        microchip,device-addr = <0>;
+        vref-supply = <&vref_reg>;
+        clocks = <&xtal>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
new file mode 100644
index 0000000000..9ceb6f18c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC ADC
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC
+  has ADCs that are used for battery charging and USB PHY VBUS and ID pin
+  detection.
+
+properties:
+  compatible:
+    enum:
+      - motorola,cpcap-adc
+      - motorola,mapphone-cpcap-adc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: adcdone
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc {
+            compatible = "motorola,mapphone-cpcap-adc";
+            interrupt-parent = <&cpcap>;
+            interrupts = <8 IRQ_TYPE_NONE>;
+            interrupt-names = "adcdone";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml
new file mode 100644
index 0000000000..04566ff02e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,nau7802.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nau7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NAU7802 I2c Analog to Digital Converter (ADC)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: nuvoton,nau7802
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,vldo:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Internal reference voltage in millivolts to be configured.
+    minimum: 2400
+    maximum: 4500
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nau7802@2a {
+            compatible = "nuvoton,nau7802";
+            reg = <0x2a>;
+            nuvoton,vldo = <3000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
new file mode 100644
index 0000000000..fede2aa640
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,npcm750-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM BMC Analog to Digital Converter (ADC)
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter,
+  both have eight channel inputs.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-adc
+      - nuvoton,npcm845-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: ADC interrupt, should be set for falling edge.
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: If not provided the defulat ADC sample rate will be used.
+
+  vref-supply:
+    description: If not supplied, the internal voltage reference will be used.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@f000c000 {
+            compatible = "nuvoton,npcm750-adc";
+            reg = <0xf000c000 0x8>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk NPCM7XX_CLK_ADC>;
+            resets = <&rstc NPCM7XX_RESET_IPSRST1 NPCM7XX_RESET_ADC>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
new file mode 100644
index 0000000000..0a192ca192
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP IMX8QXP ADC
+
+maintainers:
+  - Cai Huoqing <caihuoqing@baidu.com>
+
+description:
+  Supports the ADC found on the IMX8QXP SoC.
+
+properties:
+  compatible:
+    const: nxp,imx8qxp-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      External ADC reference voltage supply on VREFH pad. If VERID[MVI] is
+      set, there are additional, internal reference voltages selectable.
+      VREFH1 is always from VREFH pad.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-rates
+  - power-domains
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@5a880000 {
+            compatible = "nxp,imx8qxp-adc";
+            reg = <0x0 0x5a880000 0x0 0x10000>;
+            interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX_SC_R_ADC_0>,
+                     <&clk IMX_SC_R_ADC_0>;
+            clock-names = "per", "ipg";
+            assigned-clocks = <&clk IMX_SC_R_ADC_0>;
+            assigned-clock-rates = <24000000>;
+            power-domains = <&pd IMX_SC_R_ADC_0>;
+            vref-supply = <&reg_1v8>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
new file mode 100644
index 0000000000..dacc526dc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX93 ADC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels
+  connected to pins. it support normal and inject mode, include
+  One-Shot and Scan (continuous) conversions. Programmable DMA
+  enables for each channel  Also this ADC contain alternate analog
+  watchdog thresholds, select threshold through input ports. And
+  also has Self-test logic and Software-initiated calibration.
+
+properties:
+  compatible:
+    const: nxp,imx93-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: WDGnL, watchdog threshold interrupt requests.
+      - description: WDGnH, watchdog threshold interrupt requests.
+      - description: normal conversion, include EOC (End of Conversion),
+          ECH (End of Chain), JEOC (End of Injected Conversion) and
+          JECH (End of injected Chain).
+      - description: Self-testing Interrupts.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  vref-supply:
+    description:
+      The reference voltage which used to establish channel scaling.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@44530000 {
+            compatible = "nxp,imx93-adc";
+            reg = <0x44530000 0x10000>;
+            interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX93_CLK_ADC1_GATE>;
+            clock-names = "ipg";
+            vref-supply = <&reg_vref_1v8>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
new file mode 100644
index 0000000000..70b38038a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Supports the ADC found on the LPC1850 SoC.
+
+properties:
+  compatible:
+    const: nxp,lpc1850-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vref-supply: true
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@400e3000 {
+            compatible = "nxp,lpc1850-adc";
+            reg = <0x400e3000 0x1000>;
+            interrupts = <17>;
+            clocks = <&ccu1 CLK_APB3_ADC0>;
+            vref-supply = <&reg_vdda>;
+            resets = <&rgu 40>;
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
new file mode 100644
index 0000000000..2c5032be83
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,lpc3220-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SoC ADC controller
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description:
+  This hardware block has been used on several LPC32XX SoCs.
+
+properties:
+  compatible:
+    const: nxp,lpc3220-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@40048000 {
+            compatible = "nxp,lpc3220-adc";
+            reg = <0x40048000 0x1000>;
+            interrupt-parent = <&mic>;
+            interrupts = <39 0>;
+            vref-supply = <&vcc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
new file mode 100644
index 0000000000..58ea1ca4a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,pm8018-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's PM8xxx voltage XOADC
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
+  oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8018-adc
+      - qcom,pm8038-adc
+      - qcom,pm8058-adc
+      - qcom,pm8921-adc
+
+  reg:
+    maxItems: 1
+    description:
+      ADC base address in the PMIC, typically 0x197.
+
+  xoadc-ref-supply:
+    description:
+      The reference voltage may vary with PMIC variant but is typically
+      something like 2.2 or 1.8V.
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+    description:
+      The first cell is the prescaler (on PM8058) or premux (on PM8921)
+      with two valid bits  so legal values are 0x00, 0x01 or 0x02.
+      The second cell is the main analog mux setting (0x00..0x0f).
+      The combination of prescaler/premux and analog mux uniquely addresses
+      a hardware channel on all systems.
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 2
+    description:
+      The cells are precaler or premux followed by the analog muxing line.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - adc-channel@c
+  - adc-channel@d
+  - adc-channel@f
+
+patternProperties:
+  "^(adc-channel@)[0-9a-f]$":
+    type: object
+    description: |
+      ADC channel specific configuration.
+      Note that channels c, d and f must be present for calibration.
+      These three nodes are used for absolute and ratiometric calibration
+      and only need to have these reg values: they are by hardware definition
+      1:1 ratio converters that sample 625, 1250 and 0 milliV and create
+      an interpolation calibration for all other ADCs.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          This parameter is used to decrease the ADC sampling rate.
+          Quicker measurements can be made by reducing the decimation ratio.
+          Valid values are 512, 1024, 2048, 4096.
+          If the property is not found, a default value of 512 will be used.
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel calibration type. If this property is specified
+          VADC will use a special voltage references for channel
+          calibration. The available references are specified in the
+          as a u32 value setting (see below) and it is compulsory
+          to also specify this reference if ratiometric calibration
+          is selected.
+
+          If the property is not found, the channel will be
+          calibrated with the 0.625V and 1.25V reference channels, also
+          known as an absolute calibration.
+
+          The reference voltage pairs when using ratiometric calibration:
+          0 = XO_IN/XOADC_GND
+          1 = PMIC_IN/XOADC_GND
+          2 = PMIC_IN/BMS_CSP
+          3 (invalid)
+          4 = XOADC_GND/XOADC_GND
+          5 = XOADC_VREF/XOADC_GND
+
+    additionalProperties: false
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@197 {
+            compatible = "qcom,pm8058-adc";
+            reg = <0x197>;
+            interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+            #io-channel-cells = <2>;
+
+            vcoin: adc-channel@0 {
+                reg = <0x00 0x00>;
+            };
+            vbat: adc-channel@1 {
+                reg = <0x00 0x01>;
+            };
+            dcin: adc-channel@2 {
+                reg = <0x00 0x02>;
+            };
+            ichg: adc-channel@3 {
+                reg = <0x00 0x03>;
+            };
+            vph_pwr: adc-channel@4 {
+                reg = <0x00 0x04>;
+            };
+            usb_vbus: adc-channel@a {
+                reg = <0x00 0x0a>;
+            };
+            die_temp: adc-channel@b {
+                reg = <0x00 0x0b>;
+            };
+            ref_625mv: adc-channel@c {
+                reg = <0x00 0x0c>;
+            };
+            ref_1250mv: adc-channel@d {
+                reg = <0x00 0x0d>;
+            };
+            ref_325mv: adc-channel@e {
+                reg = <0x00 0x0e>;
+            };
+            ref_muxoff: adc-channel@f {
+                reg = <0x00 0x0f>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
new file mode 100644
index 0000000000..73def67fbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-iadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC current ADC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+  A 16 bit ADC is used for current measurements. IADC can measure the current
+  through an external resistor (channel 1) or internal (built-in) resistor
+  (channel 0). When using an external resistor it is to be described by
+  qcom,external-resistor-micro-ohms property.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm8226-iadc
+          - qcom,pm8941-iadc
+      - const: qcom,spmi-iadc
+
+  reg:
+    description: IADC base address and length in the SPMI PMIC register map
+    maxItems: 1
+
+  qcom,external-resistor-micro-ohms:
+    description:
+      Sensor resistor value. If not defined value of 10000 micro Ohms
+      will be used.
+
+  interrupts:
+    maxItems: 1
+    description:
+      End of conversion interrupt.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic_iadc: adc@3600 {
+            compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+            reg = <0x3600>;
+            interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+            qcom,external-resistor-micro-ohms = <10000>;
+            #io-channel-cells  = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
new file mode 100644
index 0000000000..b3a6263898
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-rradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC Round Robin ADC
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+description: |
+  The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to
+  read the voltage, current and temperature for supported peripherals such as
+  the battery thermistor die temperature, charger temperature, USB and DC input
+  voltage / current and battery ID resistor.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-rradc
+      - qcom,pm660-rradc
+
+  reg:
+    maxItems: 1
+
+  qcom,batt-id-delay-ms:
+    description: Sets the hardware settling time for the battery ID resistor.
+    enum: [0, 1, 4, 12, 20, 40, 60, 80]
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic_rradc: adc@4500 {
+            compatible = "qcom,pmi8998-rradc";
+            reg = <0x4500>;
+            #io-channel-cells  = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
new file mode 100644
index 0000000000..ad7d6fc49d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -0,0 +1,309 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+  voltage. The VADC is a 15-bit sigma-delta ADC.
+  SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
+  voltage. The VADC is a 16-bit sigma-delta ADC.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qcom,pms405-adc
+          - const: qcom,spmi-adc-rev2
+      - enum:
+          - qcom,spmi-vadc
+          - qcom,spmi-adc5
+          - qcom,spmi-adc-rev2
+          - qcom,spmi-adc7
+
+  reg:
+    description: VADC base address in the SPMI PMIC register map
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#io-channel-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      End of conversion interrupt.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - '#io-channel-cells'
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description: |
+      Represents the external channels which are connected to the ADC.
+      For compatible property "qcom,spmi-vadc" following channels, also known as
+      reference point channels, are used for result calibration and their channel
+      configuration nodes should be defined:
+      VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
+      VADC_GND_REF and VADC_VDD_VADC.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          ADC channel number.
+          See include/dt-bindings/iio/qcom,spmi-vadc.h
+          For PMIC7 ADC, the channel numbers are specified separately per PMIC
+          in the PMIC-specific files in include/dt-bindings/iio/.
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: |
+            ADC input of the platform as seen in the schematics.
+            For thermistor inputs connected to generic AMUX or GPIO inputs
+            these can vary across platform for the same pins. Hence select
+            the platform schematics name for this channel.
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+
+      qcom,pre-scaling:
+        description: |
+            Used for scaling the channel input signal before the signal is
+            fed to VADC. The configuration for this node is to know the
+            pre-determined ratio and use it for post scaling. It is a pair of
+            integers, denoting the numerator and denominator of the fraction by which
+            input signal is multiplied. For example, <1 3> indicates the signal is scaled
+            down to 1/3 of its value before ADC measurement.
+            If property is not found default value depending on chip will be used.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 1
+              - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
+          - items:
+              - const: 10
+              - const: 81
+
+      qcom,ratiometric:
+        description: |
+            Channel calibration type.
+            - For compatible property "qcom,spmi-vadc", if this property is
+              specified VADC will use the VDD reference (1.8V) and GND for
+              channel calibration. If property is not found, channel will be
+              calibrated with 0.625V and 1.25V reference channels, also
+              known as absolute calibration.
+            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
+              "qcom,spmi-adc-rev2", if this property is specified VADC will use
+              the VDD reference (1.875V) and GND for channel calibration. If
+              property is not found, channel will be calibrated with 0V and 1.25V
+              reference channels, also known as absolute calibration.
+        type: boolean
+
+      qcom,hw-settle-time:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Time between AMUX getting configured and the ADC starting
+            conversion. The 'hw_settle_time' is an index used from valid values
+            and programmed in hardware to achieve the hardware settling delay.
+
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            Number of samples to be used for measurement.
+            Averaging provides the option to obtain a single measurement
+            from the ADC that is an average of multiple samples. The value
+            selected is 2^(value).
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-vadc
+
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 512, 1024, 2048, 4096 ]
+              default: 512
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-rev2
+
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 256, 512, 1024 ]
+              default: 1024
+
+            qcom,hw-settle-time:
+              enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10 ]
+              default: 0
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc5
+
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 250, 420, 840 ]
+              default: 840
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
+                      4, 6, 8, 10, 16, 32, 64, 128 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc7
+
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            qcom,decimation:
+              enum: [ 85, 340, 1360 ]
+              default: 1360
+
+            qcom,hw-settle-time:
+              enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000,
+                      8000, 16000, 32000, 64000, 128000 ]
+              default: 15
+
+            qcom,avg-samples:
+              enum: [ 1, 2, 4, 8, 16 ]
+              default: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        /* VADC node */
+        pmic_vadc: adc@3100 {
+            compatible = "qcom,spmi-vadc";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Channel node */
+            channel@39 {
+                reg = <0x39>;
+                qcom,decimation = <512>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                qcom,avg-samples = <1>;
+                qcom,pre-scaling = <1 3>;
+            };
+
+            channel@9 {
+                reg = <0x9>;
+            };
+
+            channel@a {
+                reg = <0xa>;
+            };
+
+            channel@e {
+                reg = <0xe>;
+            };
+
+            channel@f {
+                reg = <0xf>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            channel@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "xo_therm";
+            };
+
+            channel@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "conn_therm";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
new file mode 100644
index 0000000000..36dff3250e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,rcar-gyroadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car GyroADC
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+
+description: |
+  The GyroADC block is a reduced SPI block with up to 8 chipselect lines,
+  which supports the SPI protocol of a selected few SPI ADCs. The SPI ADCs
+  are sampled by the GyroADC block in a round-robin fashion and the result
+  presented in the GyroADC registers.
+  The ADC bindings should match with that of the devices connected to a
+  full featured SPI bus.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7791-gyroadc
+          - renesas,r8a7792-gyroadc
+      - const: renesas,rcar-gyroadc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "@[0-7]$":
+    type: object
+    properties:
+      compatible:
+        description: |
+          fujitsu,mb88101a
+          - Fujitsu MB88101A compatible mode,
+            12bit sampling, up to 4 channels can be sampled in round-robin
+            fashion. One Fujitsu chip supplies four GyroADC channels with
+            data as it contains four ADCs on the chip and thus for 4-channel
+            operation, single MB88101A is required. The Cx chipselect lines
+            of the MB88101A connect directly to two CHS lines of the GyroADC,
+            no demuxer is required. The data out line of each MB88101A
+            connects to a shared input pin of the GyroADC.
+          ti,adcs7476 or ti,adc121 or adi,ad7476
+          - TI ADCS7476 / TI ADC121 / ADI AD7476 compatible mode, 15bit
+            sampling, up to 8 channels can be sampled in round-robin
+            fashion. One TI/ADI chip supplies single ADC channel with data,
+            thus for 8-channel operation, 8 chips are required.
+            A 3:8 chipselect demuxer is  required to connect the nCS line
+            of the TI/ADI chips to the GyroADC, while MISO line of each
+            TI/ADI ADC connects to a shared input pin of the GyroADC.
+          maxim,max1162 or maxim,max11100
+          - Maxim MAX1162 / Maxim MAX11100 compatible mode,  16bit sampling,
+            up to 8 channels can be sampled in round-robin fashion. One
+            Maxim chip supplies single ADC channel with data, thus for
+            8-channel operation, 8 chips are required.
+            A 3:8 chipselect demuxer is required to connect the nCS line
+            of the MAX chips to the GyroADC, while MISO line of each Maxim
+            ADC connects to a shared input pin of the GyroADC.
+        enum:
+          - adi,ad7476
+          - fujitsu,mb88101a
+          - maxim,max1162
+          - maxim,max11100
+          - ti,adcs7476
+          - ti,adc121
+
+      reg:
+        minimum: 0
+        maximum: 7
+
+      vref-supply: true
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - vref-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    adc@e6e54000 {
+        compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
+        reg = <0xe6e54000 64>;
+        clocks = <&cpg CPG_MOD 901>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 901>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "maxim,max1162";
+            vref-supply = <&vref_max1162>;
+        };
+
+        adc@1 {
+            reg = <1>;
+            compatible = "maxim,max1162";
+            vref-supply = <&vref_max1162>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
new file mode 100644
index 0000000000..ba86c7b7d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L ADC
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description: |
+  A/D Converter block is a successive approximation analog-to-digital converter
+  with a 12-bit accuracy. Up to eight analog input channels can be selected.
+  Conversions can be performed in single or repeat mode. Result of the ADC is
+  stored in a 32-bit data register corresponding to each channel.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-adc   # RZ/G2UL and RZ/Five
+          - renesas,r9a07g044-adc   # RZ/G2L
+          - renesas,r9a07g054-adc   # RZ/V2L
+      - const: renesas,rzg2l-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: adclk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: adrst-n
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: adc.yaml
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-adc
+    then:
+      patternProperties:
+        "^channel@[2-7]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 7
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    adc: adc@10059000 {
+      compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
+      reg = <0x10059000 0x400>;
+      interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
+               <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
+      clock-names = "adclk", "pclk";
+      power-domains = <&cpg>;
+      resets = <&cpg R9A07G044_ADC_PRESETN>,
+               <&cpg R9A07G044_ADC_ADRST_N>;
+      reset-names = "presetn", "adrst-n";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+      };
+      channel@1 {
+        reg = <1>;
+      };
+      channel@2 {
+        reg = <2>;
+      };
+      channel@3 {
+        reg = <3>;
+      };
+      channel@4 {
+        reg = <4>;
+      };
+      channel@5 {
+        reg = <5>;
+      };
+      channel@6 {
+        reg = <6>;
+      };
+      channel@7 {
+        reg = <7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 0000000000..88e008629e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+  interface, and the device provides full information for system by reading
+  out the loading current and power.
+
+  The device monitors both of the drops across sense resistor and the BUS
+  voltage, converts into the current in amperes, and power in watts through
+  internal analog-to-digital converter ADC. The programmable calibration,
+  adjustable conversion time, and averaging function are also built in for
+  more design flexibility.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+  compatible:
+    const: richtek,rtq6056
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt IN+/IN- sensing node resistor
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@40 {
+        compatible = "richtek,rtq6056";
+        reg = <0x40>;
+        #io-channel-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
new file mode 100644
index 0000000000..aa24b84139
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rockchip-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Successive Approximation Register (SAR) A/D Converter
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,saradc
+      - const: rockchip,rk3066-tsadc
+      - const: rockchip,rk3399-saradc
+      - const: rockchip,rk3588-saradc
+      - items:
+          - enum:
+              - rockchip,px30-saradc
+              - rockchip,rk3308-saradc
+              - rockchip,rk3328-saradc
+              - rockchip,rk3568-saradc
+              - rockchip,rv1108-saradc
+              - rockchip,rv1126-saradc
+          - const: rockchip,rk3399-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: converter clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: saradc
+      - const: apb_pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: saradc-apb
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    saradc: saradc@2006c000 {
+      compatible = "rockchip,saradc";
+      reg = <0x2006c000 0x100>;
+      interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+      clock-names = "saradc", "apb_pclk";
+      resets = <&cru SRST_SARADC>;
+      reset-names = "saradc-apb";
+      vref-supply = <&vcc18>;
+      #io-channel-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
new file mode 100644
index 0000000000..582d0a03b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Analog to Digital Converter (ADC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-adc-v1                 # Exynos5250
+      - samsung,exynos-adc-v2
+      - samsung,exynos3250-adc
+      - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
+      - samsung,exynos7-adc
+      - samsung,s3c2410-adc
+      - samsung,s3c2416-adc
+      - samsung,s3c2440-adc
+      - samsung,s3c2443-adc
+      - samsung,s3c6410-adc
+      - samsung,s5pv210-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Phandle to ADC bus clock. For Exynos3250 additional clock is needed.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description:
+      Must contain clock names (adc, sclk) matching phandles in clocks
+      property.
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    description:
+      ADC interrupt followed by optional touchscreen interrupt.
+    minItems: 1
+    maxItems: 2
+
+  "#io-channel-cells":
+    const: 1
+
+  vdd-supply: true
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node (to access the ADC_PHY
+      register on Exynos3250/4x12/5250/5420/5800).
+
+  has-touchscreen:
+    description:
+      If present, indicates that a touchscreen is connected and usable.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - "#io-channel-cells"
+  - vdd-supply
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos-adc-v1
+              - samsung,exynos-adc-v2
+              - samsung,exynos3250-adc
+              - samsung,exynos4212-adc
+    then:
+      required:
+        - samsung,syscon-phandle
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-adc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: adc
+            - const: sclk
+    else:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: adc
+
+  - if:
+      required:
+        - has-touchscreen
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+examples:
+  - |
+    adc: adc@12d10000 {
+        compatible = "samsung,exynos-adc-v1";
+        reg = <0x12d10000 0x100>;
+        interrupts = <0 106 0>;
+        #io-channel-cells = <1>;
+
+        clocks = <&clock 303>;
+        clock-names = "adc";
+
+        vdd-supply = <&buck5_reg>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+
+        /* NTC thermistor is a hwmon device */
+        thermistor {
+            compatible = "murata,ncp15wb473";
+            pullup-uv = <1800000>;
+            pullup-ohm = <47000>;
+            pulldown-ohm = <0>;
+            io-channels = <&adc 4>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    adc@126c0000 {
+        compatible = "samsung,exynos3250-adc";
+        reg = <0x126c0000 0x100>;
+        interrupts = <0 137 0>;
+        #io-channel-cells = <1>;
+
+        clocks = <&cmu CLK_TSADC>,
+                 <&cmu CLK_SCLK_TSADC>;
+        clock-names = "adc", "sclk";
+
+        vdd-supply = <&buck5_reg>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
new file mode 100644
index 0000000000..cab0d425ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sigma delta modulator
+
+maintainers:
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+
+properties:
+  compatible:
+    description: |
+      "sd-modulator" can be used as a generic SD modulator,
+      if the modulator is not specified in the compatible list.
+    enum:
+      - sd-modulator
+      - ads1201
+
+  '#io-channel-cells':
+    const: 0
+
+required:
+  - compatible
+  - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ads1202: adc {
+      compatible = "sd-modulator";
+      #io-channel-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
new file mode 100644
index 0000000000..8181cf9a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX series PMICs ADC
+
+maintainers:
+  - Baolin Wang <baolin.wang7@gmail.com>
+
+description:
+  Supports the ADC found on these PMICs.
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-adc
+      - sprd,sc2721-adc
+      - sprd,sc2723-adc
+      - sprd,sc2730-adc
+      - sprd,sc2731-adc
+      - sprd,ump9620-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  hwlocks:
+    maxItems: 1
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - sprd,ump9620-adc
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 2
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib
+            - const: small_scale_calib
+
+    else:
+      properties:
+        nvmem-cells:
+          maxItems: 6
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib1
+            - const: big_scale_calib2
+            - const: small_scale_calib1
+            - const: small_scale_calib2
+            - const: vbat_det_cal1
+            - const: vbat_det_cal2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#io-channel-cells"
+  - hwlocks
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@480 {
+            compatible = "sprd,sc2731-adc";
+            reg = <0x480>;
+            interrupt-parent = <&sc2731_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+            nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@504 {
+            compatible = "sprd,ump9620-adc";
+            reg = <0x504>;
+            interrupt-parent = <&ump9620_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_bcal1>, <&adc_bcal2>,
+                          <&adc_scal1>, <&adc_scal2>,
+                          <&vbat_det_cal1>, <&vbat_det_cal2>;
+            nvmem-cell-names = "big_scale_calib1", "big_scale_calib2",
+                               "small_scale_calib1", "small_scale_calib2",
+                               "vbat_det_cal1", "vbat_det_cal2";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
new file mode 100644
index 0000000000..995cbf8cef
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -0,0 +1,608 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 ADC
+
+description: |
+  STM32 ADC is a successive approximation analog-to-digital converter.
+  It has several multiplexed input channels. Conversions can be performed
+  in single, continuous, scan or discontinuous mode. Result of the ADC is
+  stored in a left-aligned or right-aligned 32-bit data register.
+  Conversions can be launched in software or using hardware triggers.
+
+  The analog watchdog feature allows the application to detect if the input
+  voltage goes beyond the user-defined, higher or lower thresholds.
+
+  Each STM32 ADC block can have up to 3 ADC instances.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-adc-core
+      - st,stm32h7-adc-core
+      - st,stm32mp1-adc-core
+      - st,stm32mp13-adc-core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      One or more interrupts for ADC block, depending on part used:
+        - stm32f4 and stm32h7 share a common ADC interrupt line.
+        - stm32mp1 has two separate interrupt lines, one for each ADC within
+          ADC block.
+        - stm32mp13 has an interrupt line per ADC block.
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Core can use up to two clocks, depending on part used:
+        - "adc" clock: for the analog circuitry, common to all ADCs.
+          It's required on stm32f4.
+          It's optional on stm32h7 and stm32mp1.
+        - "bus" clock: for registers access, common to all ADCs.
+          It's not present on stm32f4.
+          It's required on stm32h7 and stm32mp1.
+
+  clock-names: true
+
+  st,max-clk-rate-hz:
+    description:
+      Allow to specify desired max clock rate used by analog circuitry.
+
+  vdda-supply:
+    description: Phandle to the vdda input analog voltage.
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  booster-supply:
+    description:
+      Phandle to the embedded booster regulator that can be used to supply ADC
+      analog input switches on stm32h7 and stm32mp1.
+
+  vdd-supply:
+    description:
+      Phandle to the vdd input voltage. It can be used to supply ADC analog
+      input switches on stm32mp1.
+
+  st,syscfg:
+    description:
+      Phandle to system configuration controller. It can be used to control the
+      analog circuitry on stm32mp1.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-adc-core
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: adc
+
+        interrupts:
+          items:
+            - description: interrupt line common for all ADCs
+
+        st,max-clk-rate-hz:
+          minimum: 600000
+          maximum: 36000000
+          default: 36000000
+
+        booster-supply: false
+
+        vdd-supply: false
+
+        st,syscfg: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: interrupt line common for all ADCs
+
+        st,max-clk-rate-hz:
+          minimum: 120000
+          maximum: 36000000
+          default: 36000000
+
+        vdd-supply: false
+
+        st,syscfg: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: interrupt line for ADC1
+            - description: interrupt line for ADC2
+
+        st,max-clk-rate-hz:
+          minimum: 120000
+          maximum: 36000000
+          default: 36000000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp13-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: ADC interrupt line
+
+        st,max-clk-rate-hz:
+          minimum: 150000
+          maximum: 75000000
+          default: 75000000
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdda-supply
+  - vref-supply
+  - interrupt-controller
+  - '#interrupt-cells'
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^adc@[0-9]+$":
+    type: object
+    description:
+      An ADC block node should contain at least one subnode, representing an
+      ADC instance available on the machine.
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32f4-adc
+          - st,stm32h7-adc
+          - st,stm32mp1-adc
+          - st,stm32mp13-adc
+
+      reg:
+        description: |
+          Offset of ADC instance in ADC block. Valid values are:
+            - 0x0:   ADC1
+            - 0x100: ADC2
+            - 0x200: ADC3 (stm32f4 only)
+        maxItems: 1
+
+      '#io-channel-cells':
+        const: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      interrupts:
+        description: |
+          IRQ Line for the ADC instance. Valid values are:
+            - 0 for adc@0 (single adc for stm32mp13)
+            - 1 for adc@100
+            - 2 for adc@200 (stm32f4 only)
+        maxItems: 1
+
+      clocks:
+        description:
+          Input clock private to this ADC instance. It's required only on
+          stm32f4, that has per instance clock input for registers access.
+        maxItems: 1
+
+      dmas:
+        description: RX DMA Channel
+        maxItems: 1
+
+      dma-names:
+        const: rx
+
+      assigned-resolution-bits:
+        description: |
+          Resolution (bits) to use for conversions:
+            - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
+            - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
+
+      st,adc-channels:
+        description: |
+          List of single-ended channels muxed for this ADC. It can have up to:
+            - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+            - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
+            - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
+              stm32mp1.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+
+      st,adc-diff-channels:
+        description: |
+          List of differential channels muxed for this ADC. Some channels can
+          be configured as differential instead of single-ended on stm32h7 and
+          on stm32mp1. Positive and negative inputs pairs are listed:
+          <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19.
+
+          Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is
+          required if no adc generic channel is defined. These legacy channel
+          properties are exclusive with adc generic channel bindings.
+          Both properties can be used together. Some channels can be
+          used as single-ended and some other ones as differential (mixed). But
+          channels can't be configured both as single-ended and differential.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "vinp" indicates positive input number
+              minimum: 0
+              maximum: 19
+            - description: |
+                "vinn" indicates negative input number
+              minimum: 0
+              maximum: 19
+        deprecated: true
+
+      st,min-sample-time-nsecs:
+        description:
+          Minimum sampling time in nanoseconds. Depending on hardware (board)
+          e.g. high/low analog input source impedance, fine tune of ADC
+          sampling time may be recommended. This can be either one value or an
+          array that matches "st,adc-channels" and/or "st,adc-diff-channels"
+          list, to set sample time resp. for all channels, or independently for
+          each channel.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+
+      nvmem-cells:
+        items:
+          - description: Phandle to the calibration vrefint data provided by otp
+
+      nvmem-cell-names:
+        items:
+          - const: vrefint
+
+    patternProperties:
+      "^channel@([0-9]|1[0-9])$":
+        type: object
+        $ref: adc.yaml
+        description: Represents the external channels which are connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 0
+              maximum: 19
+
+          label:
+            description: |
+              Unique name to identify which channel this is.
+              Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
+              are used to identify internal channels with matching names.
+
+          diff-channels:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              minimum: 0
+              maximum: 19
+
+          st,min-sample-time-ns:
+            description: |
+              Minimum sampling time in nanoseconds. Depending on hardware (board)
+              e.g. high/low analog input source impedance, fine tune of ADC
+              sampling time may be recommended.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32f4-adc
+
+        then:
+          properties:
+            reg:
+              enum:
+                - 0x0
+                - 0x100
+                - 0x200
+
+            interrupts:
+              minimum: 0
+              maximum: 2
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 16
+              items:
+                minimum: 0
+                maximum: 15
+
+            st,adc-diff-channels: false
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 16
+              items:
+                minimum: 80
+
+          required:
+            - clocks
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - st,stm32h7-adc
+                  - st,stm32mp1-adc
+
+        then:
+          properties:
+            reg:
+              enum:
+                - 0x0
+                - 0x100
+
+            interrupts:
+              minimum: 0
+              maximum: 1
+
+            assigned-resolution-bits:
+              enum: [8, 10, 12, 14, 16]
+              default: 16
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 20
+              items:
+                minimum: 0
+                maximum: 19
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 20
+              items:
+                minimum: 40
+
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32mp13-adc
+
+        then:
+          properties:
+            reg:
+              const: 0x0
+
+            interrupts:
+              const: 0
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 0
+                maximum: 18
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 40
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example 1: with stm32f429, ADC1, single-ended channel 8
+      adc123: adc@40012000 {
+        compatible = "st,stm32f4-adc-core";
+        reg = <0x40012000 0x400>;
+        interrupts = <18>;
+        clocks = <&rcc 0 168>;
+        clock-names = "adc";
+        st,max-clk-rate-hz = <36000000>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+          compatible = "st,stm32f4-adc";
+          #io-channel-cells = <1>;
+          reg = <0x0>;
+          clocks = <&rcc 0 168>;
+          interrupt-parent = <&adc123>;
+          interrupts = <0>;
+          st,adc-channels = <8>;
+          dmas = <&dma2 0 0 0x400 0x0>;
+          dma-names = "rx";
+          assigned-resolution-bits = <8>;
+        };
+        // ...
+        // other adc child nodes follow...
+      };
+
+  - |
+    // Example 2: with stm32mp157c to setup ADC1 with:
+    // - channels 0 & 1 as single-ended
+    // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs)
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/clock/stm32mp1-clks.h>
+      adc12: adc@48003000 {
+        compatible = "st,stm32mp1-adc-core";
+        reg = <0x48003000 0x400>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+        clock-names = "bus", "adc";
+        booster-supply = <&booster>;
+        vdd-supply = <&vdd>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        st,syscfg = <&syscfg>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+          compatible = "st,stm32mp1-adc";
+          #io-channel-cells = <1>;
+          reg = <0x0>;
+          interrupt-parent = <&adc12>;
+          interrupts = <0>;
+          st,adc-channels = <0 1>;
+          st,adc-diff-channels = <2 6>, <3 7>;
+          st,min-sample-time-nsecs = <5000>;
+          dmas = <&dmamux1 9 0x400 0x05>;
+          dma-names = "rx";
+        };
+        // ...
+        // other adc child node follow...
+      };
+
+  - |
+    // Example 3: with stm32mp157c to setup ADC2 with:
+    // - internal channels 13, 14, 15.
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/clock/stm32mp1-clks.h>
+      adc122: adc@48003000 {
+        compatible = "st,stm32mp1-adc-core";
+        reg = <0x48003000 0x400>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+        clock-names = "bus", "adc";
+        booster-supply = <&booster>;
+        vdd-supply = <&vdd>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        st,syscfg = <&syscfg>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@100 {
+          compatible = "st,stm32mp1-adc";
+          #io-channel-cells = <1>;
+          reg = <0x100>;
+          interrupts = <1>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          channel@13 {
+            reg = <13>;
+            label = "vrefint";
+            st,min-sample-time-ns = <9000>;
+          };
+          channel@14 {
+            reg = <14>;
+            label = "vddcore";
+            st,min-sample-time-ns = <9000>;
+          };
+          channel@15 {
+            reg = <15>;
+            label = "vbat";
+            st,min-sample-time-ns = <9000>;
+          };
+        };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
new file mode 100644
index 0000000000..1970503389
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -0,0 +1,329 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DFSDM ADC device driver
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description: |
+  STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+  interface external sigma delta modulators to STM32 micro controllers.
+  It is mainly targeted for:
+  - Sigma delta modulators (motor control, metering...)
+  - PDM microphones (audio digital microphone)
+
+  It features up to 8 serial digital interfaces (SPI or Manchester) and
+  up to 4 filters on stm32h7 or 6 filters on stm32mp1.
+
+  Each child node matches with a filter instance.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-dfsdm
+      - st,stm32mp1-dfsdm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description:
+          Internal clock used for DFSDM digital processing and control blocks.
+          dfsdm clock can also feed CLKOUT, when CLKOUT is used.
+      - description: audio clock can be used as an alternate to feed CLKOUT.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: dfsdm
+      - const: audio
+    minItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  spi-max-frequency:
+    description:
+      SPI clock OUT frequency (Hz). Requested only for SPI master mode.
+      This clock must be set according to the "clock" property.
+      Frequency must be a multiple of the rcc clock frequency.
+      If not, SPI CLKOUT frequency will not be accurate.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^filter@[0-9]+$":
+    type: object
+    unevaluatedProperties: false
+    description: child node
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32-dfsdm-adc
+          - st,stm32-dfsdm-dmic
+
+      reg:
+        description: Specifies the DFSDM filter instance used.
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      st,adc-channels:
+        description: |
+          List of single-ended channels muxed for this ADC.
+          On stm32h7 and stm32mp1:
+          - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
+          - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minimum: 0
+          maximum: 7
+
+      st,adc-channel-names:
+        description: List of single-ended channel names.
+
+      st,filter-order:
+        description: |
+          SinC filter order from 0 to 5.
+          - 0: FastSinC
+          - [1-5]: order 1 to 5.
+          For audio purpose it is recommended to use order 3 to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 5
+
+      "#io-channel-cells":
+        const: 1
+
+      st,adc-channel-types:
+        description: |
+          Single-ended channel input type.
+          - "SPI_R": SPI with data on rising edge (default)
+          - "SPI_F": SPI with data on falling edge
+          - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+          - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
+        items:
+          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-channel-clk-src:
+        description: |
+          Conversion clock source.
+          - "CLKIN": external SPI clock (CLKIN x)
+          - "CLKOUT": internal SPI clock (CLKOUT) (default)
+          - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+          - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+        items:
+          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
+        $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-alt-channel:
+        description:
+          Must be defined if two sigma delta modulators are
+          connected on same SPI input.
+          If not set, channel n is connected to SPI input n.
+          If set, channel n is connected to SPI input n + 1.
+        type: boolean
+
+      st,filter0-sync:
+        description:
+          Set to 1 to synchronize with DFSDM filter instance 0.
+          Used for multi microphones synchronization.
+        type: boolean
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        items:
+          - const: rx
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - st,adc-channels
+      - st,adc-channel-names
+      - st,filter-order
+      - "#io-channel-cells"
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-adc
+
+        then:
+          properties:
+            st,adc-channels:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-names:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-types:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-clk-src:
+              minItems: 1
+              maxItems: 8
+
+            io-channels:
+              description:
+                From common IIO binding. Used to pipe external sigma delta
+                modulator or internal ADC output to DFSDM channel.
+
+          required:
+            - io-channels
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-dmic
+
+        then:
+          properties:
+            st,adc-channels:
+              maxItems: 1
+
+            st,adc-channel-names:
+              maxItems: 1
+
+            st,adc-channel-types:
+              maxItems: 1
+
+            st,adc-channel-clk-src:
+              maxItems: 1
+
+          required:
+            - dmas
+            - dma-names
+
+          patternProperties:
+            "^dfsdm-dai+$":
+              type: object
+              additionalProperties: false
+              description: child node
+
+              properties:
+                compatible:
+                  enum:
+                    - st,stm32h7-dfsdm-dai
+
+                "#sound-dai-cells":
+                  const: 0
+
+                io-channels:
+                  description:
+                    From common IIO binding. Used to pipe external sigma delta
+                    modulator or internal ADC output to DFSDM channel.
+
+              required:
+                - compatible
+                - "#sound-dai-cells"
+                - io-channels
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-dfsdm
+
+    then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-dfsdm
+
+    then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 5
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dfsdm: dfsdm@4400d000 {
+      compatible = "st,stm32mp1-dfsdm";
+      reg = <0x4400d000 0x800>;
+      clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;
+      clock-names = "dfsdm", "audio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dfsdm0: filter@0 {
+        compatible = "st,stm32-dfsdm-dmic";
+        reg = <0>;
+        interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 101 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <1>;
+        st,adc-channel-names = "dmic0";
+        st,adc-channel-types = "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT";
+        st,filter-order = <5>;
+
+        asoc_pdm0: dfsdm-dai {
+          compatible = "st,stm32h7-dfsdm-dai";
+          #sound-dai-cells = <0>;
+          io-channels = <&dfsdm0 0>;
+        };
+      };
+
+      dfsdm_pdm1: filter@1 {
+        compatible = "st,stm32-dfsdm-adc";
+        reg = <1>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 102 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <2 3>;
+        st,adc-channel-names = "in2", "in3";
+        st,adc-channel-types = "SPI_R", "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
+        io-channels = <&sd_adc2 &sd_adc3>;
+        st,filter-order = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
new file mode 100644
index 0000000000..474e35c493
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stmpe-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC on an STMPE multifunction device.
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description:
+  This ADC forms part of an ST microelectronics STMPE multifunction device .
+  The ADC is shared with the STMPE touchscreen. As a result some ADC related
+  settings are specified in the parent node.
+  The node should be a child node of the stmpe node to which it belongs.
+
+properties:
+  compatible:
+    const: st,stmpe-adc
+
+  st,norequest-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask specifying which ADC channels should _not_ be
+      requestable due to different usage (e.g. touch).
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "st,stmpe-adc";
+        st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
new file mode 100644
index 0000000000..caaad77758
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc081c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Single-channel I2C ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description: |
+  Single-channel ADC supporting 8, 10, or 12-bit samples and high/low alerts.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc081c
+      - ti,adc101c
+      - ti,adc121c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Regulator for the combined power supply and voltage reference
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@52 {
+            compatible = "ti,adc081c";
+            reg = <0x52>;
+            vref-supply = <&reg_2p5v>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
new file mode 100644
index 0000000000..686721176a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc0832.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC0832 and similar ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+  8 bit ADCs with 1, 2, 4 or 8 inputs for single ended or differential
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc0831
+      - ti,adc0832
+      - ti,adc0834
+      - ti,adc0838
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc0832";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <200000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
new file mode 100644
index 0000000000..726d2cbfa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc084s021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC084S021 ADC
+
+maintainers:
+  - Mårten Lindahl <martenli@axis.com>
+
+description: |
+  8 bit ADC with 4 channels
+
+properties:
+  compatible:
+    const: ti,adc084s021
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: External reference, needed to establish input scaling
+
+  spi-cpol: true
+  spi-cpha: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc084s021";
+            reg = <0>;
+            vref-supply = <&adc_vref>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <16000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
new file mode 100644
index 0000000000..a60b1e100e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc108s102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC108S102 and ADC128S102
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
+
+properties:
+  compatible:
+    const:
+      ti,adc108s102
+
+  reg: true
+  vref-supply: true
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc108s102";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
new file mode 100644
index 0000000000..076088a328
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc12138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC12138 and similar self-calibrating ADCs
+
+maintainers:
+  - Akinobu Mita <akinobu.mita@gmail.com>
+
+description: |
+  13 bit ADCs with 1, 2 or 8 inputs and self calibrating circuitry to
+  correct for linearity, zero and full scale errors.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc12130
+      - ti,adc12132
+      - ti,adc12138
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: End of Conversion (EOC) interrupt
+
+  clocks:
+    maxItems: 1
+    description: Conversion clock input.
+
+  vref-p-supply:
+    description: The regulator supply for positive analog voltage reference
+
+  vref-n-supply:
+    description: |
+      The regulator supply for negative analog voltage reference
+      (Note that this must not go below GND or exceed vref-p)
+      If not specified, this is assumed to be analog ground.
+
+  ti,acquisition-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 6, 10, 18, 34 ]
+    description: |
+      The number of conversion clock periods for the S/H's acquisition time.
+      For high source impedances, this value can be increased to 18 or 34.
+      For less ADC accuracy and/or slower CCLK frequencies this value may be
+      decreased to 6.  See section 6.0 INPUT SOURCE RESISTANCE in the
+      datasheet for details.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-p-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc12138";
+            reg = <0>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio1>;
+            clocks = <&cclk>;
+            vref-p-supply = <&ldo4_reg>;
+            spi-max-frequency = <5000000>;
+            ti,acquisition-time = <6>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
new file mode 100644
index 0000000000..775eee972b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc128s052.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128S052 and similar ADCs
+
+maintainers:
+  - Angelo Compagnucci <angelo.compagnucci@gmail.com>
+
+description: |
+  Family of 12 bit SPI ADCs with 2 to 8 channels with a range of different
+  target sample rates.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc122s021
+      - ti,adc122s051
+      - ti,adc122s101
+      - ti,adc124s021
+      - ti,adc124s051
+      - ti,adc124s101
+      - ti,adc128s052
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc128s052";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
new file mode 100644
index 0000000000..afe7825229
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc161s626.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC141S626 and ADC161S626 ADCs
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Single channel 14/16bit differential ADCs
+
+properties:
+  compatible:
+    enum:
+      - ti,adc141s626
+      - ti,adc161s626
+
+  reg:
+    maxItems: 1
+
+  vdda-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,adc161s626";
+            vdda-supply = <&vdda_fixed>;
+            reg = <0>;
+            spi-max-frequency = <4300000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
new file mode 100644
index 0000000000..e004659099
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS1015/ADS1115 4 channel I2C analog to digital converter
+
+maintainers:
+  - Daniel Baluta <daniel.baluta@nxp.com>
+
+description: |
+  Datasheet at: https://www.ti.com/lit/gpn/ads1015
+  Supports both single ended and differential channels.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1015
+      - ti,ads1115
+      - ti,tla2024
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-7]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Child nodes needed for each channel that the platform uses.
+
+    properties:
+      reg:
+        description: |
+          0: Voltage over AIN0 and AIN1.
+          1: Voltage over AIN0 and AIN3.
+          2: Voltage over AIN1 and AIN3.
+          3: Voltage over AIN2 and AIN3.
+          4: Voltage over AIN0 and GND.
+          5: Voltage over AIN1 and GND.
+          6: Voltage over AIN2 and GND.
+          7: Voltage over AIN3 and GND.
+        items:
+          - minimum: 0
+            maximum: 7
+
+      ti,gain:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 5
+        description: |
+          pga is the programmable gain amplifier (values are full scale)
+          0: +/- 6.144 V
+          1: +/- 4.096 V
+          2: +/- 2.048 V (default)
+          3: +/- 1.024 V
+          4: +/- 0.512 V
+          5: +/- 0.256 V
+
+      ti,datarate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        description: |
+          Data acquisition rate in samples per second for ADS1015, TLA2024
+          0: 128
+          1: 250
+          2: 490
+          3: 920
+          4: 1600 (default)
+          5: 2400
+          6: 3300
+          7: 3300
+
+          Data acquisition rate in samples per second for ADS1115
+          0: 8
+          1: 16
+          2: 32
+          3: 64
+          4: 128 (default)
+          5: 250
+          6: 475
+          7: 860
+
+    required:
+      - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@49 {
+            compatible = "ti,ads1015";
+            reg = <0x49>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+            };
+            channel@4 {
+                reg = <4>;
+                ti,gain = <3>;
+                ti,datarate = <5>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
new file mode 100644
index 0000000000..970ccab15e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS1100/ADS1000 single channel I2C analog to digital converter
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Datasheet at: https://www.ti.com/lit/gpn/ads1100
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1100
+      - ti,ads1000
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  "#io-channel-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@49 {
+            compatible = "ti,ads1100";
+            reg = <0x49>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
new file mode 100644
index 0000000000..56a3f1766a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads124s08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads124s08 and ads124s06 ADC chip
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads124s06
+      - ti,ads124s08
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads124s08";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
new file mode 100644
index 0000000000..890f125d42
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  The ADS131E0x are a family of multichannel, simultaneous sampling,
+  24-bit, delta-sigma, analog-to-digital converters (ADCs) with a
+  built-in programmable gain amplifier (PGA), internal reference
+  and an onboard oscillator.
+  The communication with ADC chip is via the SPI bus (mode 1).
+
+  https://www.ti.com/lit/ds/symlink/ads131e08.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,ads131e04
+      - ti,ads131e06
+      - ti,ads131e08
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  clocks:
+    description: |
+      Device tree identifier to the clock source (2.048 MHz).
+      Note: clock source is selected using CLKSEL pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  interrupts:
+    description: |
+      IRQ line for the ADC data ready.
+    maxItems: 1
+
+  vref-supply:
+    description: |
+      Optional external voltage reference. If not supplied, internal voltage
+      reference is used.
+
+  ti,vref-internal:
+    description: |
+      Select the internal voltage reference value.
+      0: 2.4V
+      1: 4.0V
+      If this field is left empty, 2.4V is selected.
+      Note: internal voltage reference is used only if vref-supply is not supplied.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    default: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - clocks
+  - clock-names
+  - interrupts
+
+patternProperties:
+  "^channel@([0-7])$":
+    $ref: adc.yaml
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number.
+          Up to 4 channels, numbered from 0 to 3 for ti,ads131e04.
+          Up to 6 channels, numbered from 0 to 5 for ti,ads131e06.
+          Up to 8 channels, numbered from 0 to 7 for ti,ads131e08.
+        items:
+          minimum: 0
+          maximum: 7
+
+      ti,gain:
+        description: |
+          The PGA gain value for the channel.
+          If this field is left empty, PGA gain 1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 4, 8, 12]
+        default: 1
+
+      ti,mux:
+        description: |
+          Channel input selection(muliplexer).
+          0: Normal input.
+          1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements).
+          3: MVDD (for supply measurement)
+          4: Temperature sensor
+          If this field is left empty, normal input is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 3, 4]
+        default: 0
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "ti,ads131e08";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpha;
+        clocks = <&clk2048k>;
+        clock-names = "adc-clk";
+        interrupt-parent = <&gpio5>;
+        interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        vref-supply = <&adc_vref>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+        };
+
+        channel@1 {
+          reg = <1>;
+        };
+
+        channel@2 {
+          reg = <2>;
+          ti,gain = <2>;
+        };
+
+        channel@3 {
+          reg = <3>;
+        };
+
+        channel@4 {
+          reg = <4>;
+        };
+
+        channel@5 {
+          reg = <5>;
+        };
+
+        channel@6 {
+          reg = <6>;
+        };
+
+        channel@7 {
+          reg = <7>;
+          ti,mux = <4>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
new file mode 100644
index 0000000000..0d8d06afed
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
+
+maintainers:
+  - Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+description: |
+  Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
+
+  Specifications:
+    https://www.ti.com/lit/gpn/ads7924
+
+properties:
+  compatible:
+    const: ti,ads7924
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage (AVDD)
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-3]+$":
+    $ref: adc.yaml
+
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        items:
+          - minimum: 0
+            maximum: 3
+
+      label: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            compatible = "ti,ads7924";
+            reg = <0x48>;
+            vref-supply = <&ads7924_reg>;
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                label = "CH0";
+            };
+            channel@1 {
+                reg = <1>;
+                label = "CH1";
+            };
+            channel@2 {
+                reg = <2>;
+                label = "CH2";
+            };
+            channel@3 {
+                reg = <3>;
+                label = "CH3";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml
new file mode 100644
index 0000000000..5ab5027be9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7950.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7950 and similar ADCs
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description: |
+  Family of 4-16 channel, 8-12 bit ADCs with SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7950
+      - ti,ads7951
+      - ti,ads7952
+      - ti,ads7953
+      - ti,ads7954
+      - ti,ads7955
+      - ti,ads7956
+      - ti,ads7957
+      - ti,ads7958
+      - ti,ads7959
+      - ti,ads7960
+      - ti,ads7961
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  vref-supply:
+    description: Supplies the 2.5V or 5V reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads7957";
+            reg = <0>;
+            vref-supply = <&refin_supply>;
+            spi-max-frequency = <10000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
new file mode 100644
index 0000000000..f75b2c7029
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads8344.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS8344 ADC
+
+maintainers:
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+description: |
+  16bit 8-channel ADC with single ended inputs.
+
+properties:
+  compatible:
+    const: ti,ads8344
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: Supply the 2.5V or 5V reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads8344";
+            reg = <0>;
+            vref-supply = <&refin_supply>;
+            spi-max-frequency = <10000000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
new file mode 100644
index 0000000000..f26fdbc15f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads8688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ADS8684 and ADS8688 ADC chip
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+description: |
+   SPI 16bit ADCs with 4/8 channels.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads8684
+      - ti,ads8688
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: Optional external reference.  If not supplied, assume
+      REFSEL input tied low to enable the internal reference.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,ads8688";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
new file mode 100644
index 0000000000..b32be24a9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,am3359-adc
+          - ti,am4372-adc
+      - items:
+          - enum:
+              - ti,am654-adc
+          - const: ti,am3359-adc
+
+  '#io-channel-cells':
+    const: 1
+
+  ti,adc-channels:
+    description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
+      so on until AIN7 = 7.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-opendelay:
+    description: List of open delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to wait after applying the step configuration registers and before sending
+      the start of ADC conversion. Maximum value is 0x3FFFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-sampledelay:
+    description: List of sample delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to sample (to hold start of conversion high). Maximum value is 0xFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-avg:
+    description: Number of averages to be performed for each channel of ADC. If
+      average is 16 (this is also the maximum) then input is sampled 16 times
+      and averaged to get more accurate value. This increases the time taken by
+      ADC to generate a sample. Maximum value is 16.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - ti,adc-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "ti,am3359-adc";
+        #io-channel-cells = <1>;
+        ti,adc-channels = <4 5 6 7>;
+        ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
+        ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
+        ti,chan-step-avg = <16 2 4 8>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
new file mode 100644
index 0000000000..5fb65bf774
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
+
+maintainers:
+  - Leonard Göhrs <l.goehrs@pengutronix.de>
+
+description: |
+  The LMP92064 is a two channel ADC intended for combined voltage and current
+  measurements.
+
+  The device contains two ADCs to allow simultaneous sampling of voltage and
+  current and thus of instantaneous power consumption.
+
+properties:
+  compatible:
+    enum:
+      - ti,lmp92064
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the main part of the chip
+
+  vdig-supply:
+    description: |
+      Regulator that provides power to the digital I/O part of the chip
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value of the shunt resistor (in µΩ) connected between INCP and INCN,
+      across which current is measured. Used to provide correct scaling of the
+      raw ADC measurement.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,lmp92064";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vdig-supply = <&vdd>;
+            spi-max-frequency = <20000000>;
+            shunt-resistor-micro-ohms = <15000>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
new file mode 100644
index 0000000000..720c16a108
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,palmas-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Palmas general purpose ADC IP block
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  This ADC is often used to provide channels via the io-channels
+  consumer framework.
+  Channels list:
+    0 battery type
+    1 battery temp NTC (optional current source)
+    2 GP
+    3 temp (with ext. diode, optional current source)
+    4 GP
+    5 GP
+    6 VBAT_SENSE
+    7 VCC_SENSE
+    8 Backup Battery voltage
+    9 external charger (VCHG)
+    10 VBUS
+    11 DC-DC current probe (how does this work?)
+    12 internal die temp
+    13 internal die temp
+    14 USB ID pin voltage
+    15 test network
+
+properties:
+  compatible:
+    const: ti,palmas-gpadc
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,channel0-current-microamp:
+    description: Channel 0 current in uA.
+    enum:
+      - 0
+      - 5
+      - 15
+      - 20
+
+  ti,channel3-current-microamp:
+    description: Channel 3 current in uA.
+    enum:
+      - 0
+      - 10
+      - 400
+      - 800
+
+  ti,enable-extended-delay:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable extended delay.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    pmic {
+        compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+        adc {
+            compatible = "ti,palmas-gpadc";
+            interrupts = <18 0>,
+                         <16 0>,
+                         <17 0>;
+            #io-channel-cells = <1>;
+            ti,channel0-current-microamp = <5>;
+            ti,channel3-current-microamp = <10>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
new file mode 100644
index 0000000000..314d1d99bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,tlc4541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLC4541 and similar ADCs
+
+maintainers:
+  - Phil Reid <preid@electromag.com.au>
+
+description: |
+  14/16bit single channel ADC with SPI interface.
+
+properties:
+  compatible:
+    enum:
+      - ti,tlc3541
+      - ti,tlc4541
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,tlc4541";
+            reg = <0>;
+            vref-supply = <&vdd_supply>;
+            spi-max-frequency = <200000>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
new file mode 100644
index 0000000000..866a05c9db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,tsc2046.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2046 touch screen controller.
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  TSC2046 is a touch screen controller with 8 channels ADC.
+
+properties:
+  compatible:
+    enum:
+      - ti,tsc2046e-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description: Optional supply of the reference voltage
+
+  "#io-channel-cells":
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: adc.yaml
+    type: object
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels
+        items:
+          minimum: 0
+          maximum: 7
+
+      settling-time-us: true
+      oversampling-ratio: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,tsc2046e-adc";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+            #io-channel-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+            channel@1 {
+                reg = <1>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
+            };
+            channel@2 {
+                reg = <2>;
+            };
+            channel@3 {
+                reg = <3>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
+            };
+            channel@4 {
+                reg = <4>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
+            };
+            channel@5 {
+                reg = <5>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
+            };
+            channel@6 {
+                reg = <6>;
+            };
+            channel@7 {
+                reg = <7>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml
new file mode 100644
index 0000000000..6781ad2f0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,twl4030-madc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,twl4030-madc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MADC subsystem in the TWL4030 power module
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  The MADC subsystem in the TWL4030 consists of a 10-bit ADC
+  combined with a 16-input analog multiplexer.
+
+properties:
+  compatible:
+    const: ti,twl4030-madc
+
+  interrupts:
+    maxItems: 1
+
+  ti,system-uses-second-madc-irq:
+    type: boolean
+    description:
+      Set if the second madc irq register should be used, which is intended
+      to be used  by Co-Processors (e.g. a modem).
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    twl {
+        madc {
+            compatible = "ti,twl4030-madc";
+            interrupts = <3>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
new file mode 100644
index 0000000000..d40689f233
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AXP ADC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+description: |
+  ADC is frequently used as a provider to consumers of the ADC channels.
+  Device is a child of an axp209 multifunction device
+  ADC channels and their indexes per variant:
+
+  AXP209
+  ------
+   0 | acin_v
+   1 | acin_i
+   2 | vbus_v
+   3 | vbus_i
+   4 | pmic_temp
+   5 | gpio0_v
+   6 | gpio1_v
+   7 | ipsout_v
+   8 | batt_v
+   9 | batt_chrg_i
+  10 | batt_dischrg_i
+  11 | ts_v
+
+  AXP22x
+  ------
+   0 | pmic_temp
+   1 | batt_v
+   2 | batt_chrg_i
+   3 | batt_dischrg_i
+   4 | ts_v
+
+  AXP813
+  ------
+   0 | pmic_temp
+   1 | gpio0_v
+   2 | batt_v
+   3 | batt_chrg_i
+   4 | batt_dischrg_i
+   5 | ts_v
+
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp209-adc
+      - const: x-powers,axp221-adc
+      - const: x-powers,axp813-adc
+
+      - items:
+          - const: x-powers,axp803-adc
+          - const: x-powers,axp813-adc
+
+  "#io-channel-cells":
+    const: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    axp221 {
+        adc {
+            compatible = "x-powers,axp221-adc";
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
new file mode 100644
index 0000000000..f42e180783
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -0,0 +1,141 @@
+Xilinx XADC device driver
+
+This binding document describes the bindings for the Xilinx 7 Series XADC as well
+as the UltraScale/UltraScale+ System Monitor.
+
+The Xilinx XADC is an ADC that can be found in the Series 7 FPGAs from Xilinx.
+The XADC has a DRP interface for communication. Currently two different
+frontends for the DRP interface exist. One that is only available on the ZYNQ
+family as a hardmacro in the SoC portion of the ZYNQ. The other one is available
+on all series 7 platforms and is a softmacro with a AXI interface. This binding
+document describes the bindings for both of them since the bindings are very
+similar.
+
+The Xilinx System Monitor is an ADC that is found in the UltraScale and
+UltraScale+ FPGAs from Xilinx. The System Monitor provides a DRP interface for
+communication. Xilinx provides a standard IP core that can be used to access the
+System Monitor through an AXI interface in the FPGA fabric. This IP core is
+called the Xilinx System Management Wizard. This document describes the bindings
+for this IP.
+
+Required properties:
+	- compatible: Should be one of
+		* "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device
+		  configuration interface to interface to the XADC hardmacro.
+		* "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to
+		  interface to the XADC hardmacro.
+		* "xlnx,system-management-wiz-1.3": When using the
+		  Xilinx System Management Wizard fabric IP core to access the
+		  UltraScale and UltraScale+ System Monitor.
+	- reg: Address and length of the register set for the device
+	- interrupts: Interrupt for the XADC control interface.
+	- clocks: When using the ZYNQ this must be the ZYNQ PCAP clock,
+	  when using the axi-xadc or the axi-system-management-wizard this must be
+	  the clock that provides the clock to the AXI bus interface of the core.
+
+Optional properties:
+	- xlnx,external-mux:
+		* "none": No external multiplexer is used, this is the default
+		  if the property is omitted.
+		* "single": External multiplexer mode is used with one
+		   multiplexer.
+		* "dual": External multiplexer mode is used with two
+		  multiplexers for simultaneous sampling.
+	- xlnx,external-mux-channel: Configures which pair of pins is used to
+	  sample data in external mux mode.
+	  Valid values for single external multiplexer mode are:
+		0: VP/VN
+		1: VAUXP[0]/VAUXN[0]
+		2: VAUXP[1]/VAUXN[1]
+		...
+		16: VAUXP[15]/VAUXN[15]
+	  Valid values for dual external multiplexer mode are:
+		1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8]
+		2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9]
+		...
+		8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15]
+
+	  This property needs to be present if the device is configured for
+	  external multiplexer mode (either single or dual). If the device is
+	  not using external multiplexer mode the property is ignored.
+	- xnlx,channels: List of external channels that are connected to the ADC
+	  Required properties:
+		* #address-cells: Should be 1.
+		* #size-cells: Should be 0.
+
+	  The child nodes of this node represent the external channels which are
+	  connected to the ADC. If the property is no present no external
+	  channels will be assumed to be connected.
+
+	  Each child node represents one channel and has the following
+	  properties:
+		Required properties:
+			* reg: Pair of pins the channel is connected to.
+				0: VP/VN
+				1: VAUXP[0]/VAUXN[0]
+				2: VAUXP[1]/VAUXN[1]
+				...
+				16: VAUXP[15]/VAUXN[15]
+			  Note each channel number should only be used at most
+			  once.
+		Optional properties:
+			* xlnx,bipolar: If set the channel is used in bipolar
+			  mode.
+
+
+Examples:
+	xadc@f8007100 {
+		compatible = "xlnx,zynq-xadc-1.00.a";
+		reg = <0xf8007100 0x20>;
+		interrupts = <0 7 4>;
+		interrupt-parent = <&gic>;
+		clocks = <&pcap_clk>;
+
+		xlnx,channels {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+			channel@8 {
+				reg = <8>;
+			};
+		};
+	};
+
+	xadc@43200000 {
+		compatible = "xlnx,axi-xadc-1.00.a";
+		reg = <0x43200000 0x1000>;
+		interrupts = <0 53 4>;
+		interrupt-parent = <&gic>;
+		clocks = <&fpga1_clk>;
+
+		xlnx,channels {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			channel@0 {
+				reg = <0>;
+				xlnx,bipolar;
+			};
+		};
+	};
+
+	adc@80000000 {
+		compatible = "xlnx,system-management-wiz-1.3";
+		reg = <0x80000000 0x1000>;
+		interrupts = <0 81 4>;
+		interrupt-parent = <&gic>;
+		clocks = <&fpga1_clk>;
+
+		xlnx,channels {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			channel@0 {
+				reg = <0>;
+				xlnx,bipolar;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 0000000000..8cbad7e792
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurement.          |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AMS reference clock
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    additionalProperties: false
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
new file mode 100644
index 0000000000..2a04906531
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
@@ -0,0 +1,371 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74115H device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74115H is a single-channel software configurable input/output
+  device for industrial control applications. It contains functionality for
+  analog output, analog input, digital output, digital input, resistance
+  temperature detector, and thermocouple measurements integrated into a single
+  chip solution with an SPI interface. The device features a 16-bit ADC and a
+  14-bit DAC.
+
+    https://www.analog.com/en/products/ad74115h.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74115h
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpol: true
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  avdd-supply: true
+  avcc-supply: true
+  dvcc-supply: true
+  dovdd-supply: true
+  refin-supply: true
+
+  adi,ch-func:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Channel function.
+      0 - High impedance
+      1 - Voltage output
+      2 - Current output
+      3 - Voltage input
+      4 - Current input, externally-powered
+      5 - Current input, loop-powered
+      6 - Resistance input
+      7 - RTD measure
+      8 - Digital input logic
+      9 - Digital input, loop-powered
+      10 - Current output with HART
+      11 - Current input, externally-powered, with HART
+      12 - Current input, loop-powered, with HART
+    minimum: 0
+    maximum: 12
+    default: 0
+
+  adi,conv2-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Input node for ADC conversion 2.
+      0 - SENSE_EXT1 to AGND_SENSE
+      1 - SENSE_EXT2 to AGND_SENSE
+      2 - SENSE_EXT2 to SENSE_EXT1
+      3 - AGND to AGND
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  adi,conv2-range-microvolt:
+    description: Conversion range for ADC conversion 2.
+    oneOf:
+      - items:
+          - enum: [-2500000, 0]
+          - const: 2500000
+      - items:
+          - enum: [-12000000, 0]
+          - const: 12000000
+      - items:
+          - const: -2500000
+          - const: 0
+      - items:
+          - const: -104000
+          - const: 104000
+      - items:
+          - const: 0
+          - const: 625000
+
+  adi,sense-agnd-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the AGND sense pin.
+
+  adi,lf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the low-side filtered
+      sense pin.
+
+  adi,hf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the high-side filtered
+      sense pin.
+
+  adi,ext2-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT2 pin.
+
+  adi,ext1-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT1 pin.
+
+  adi,comparator-invert:
+    type: boolean
+    description: Whether to invert the comparator output.
+
+  adi,digital-input-sink-range-high:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      When not present, the digital input range is from 0 to 3700uA in steps
+      of 120uA, with a ~2k series resistance.
+      When present, the digital input range is from 0 to 7400uA in steps
+      of 240uA, with a ~1k series resistance.
+
+  adi,digital-input-sink-microamp:
+    description: Sink current in digital input mode.
+    minimum: 0
+    maximum: 3700
+    default: 0
+
+  adi,digital-input-debounce-mode-counter-reset:
+    type: boolean
+    description: |
+      When not present, a counter increments when the signal is asserted
+      and decrements when the signal is de-asserted.
+      When present, a counter increments while the signal is asserted and
+      resets when the signal de-asserts
+
+  adi,digital-input-unbuffered:
+    type: boolean
+    description: Whether to buffer digital input signals.
+
+  adi,digital-input-short-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input short circuits.
+
+  adi,digital-input-open-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input open circuits.
+
+  adi,digital-input-threshold-mode-fixed:
+    type: boolean
+    description: |
+      When not present, the digital input threshold range is -0.96 * AVDD
+      to AVDD.
+      When present, the threshold range is fixed from -19V to 30V.
+
+  adi,dac-bipolar:
+    type: boolean
+    description: |
+      When not present, the DAC operates in the 0V to 12V range.
+      When present, the DAC operates in the -12V to 12V range.
+
+  adi,charge-pump:
+    type: boolean
+    description: Whether to enable the internal charge pump.
+
+  adi,dac-hart-slew:
+    type: boolean
+    description: Whether to use a HART-compatible slew rate.
+
+  adi,dac-current-limit-low:
+    type: boolean
+    description: |
+      When not present, the DAC short-circuit current limit is 32mA in
+      either source or sink for VOUT and 4mA sink for IOUT.
+      When present, the limit is 16mA in either source or sink for VOUT,
+      1mA sink for IOUT.
+
+  adi,4-wire-rtd:
+    type: boolean
+    description: |
+      When not present, the ADC should be used for measuring 3-wire RTDs.
+      When present, the ADC should be used for measuring 4-wire RTDs.
+
+  adi,3-wire-rtd-excitation-swap:
+    type: boolean
+    description: Whether to swap the excitation for 3-wire RTD.
+
+  adi,rtd-excitation-current-microamp:
+    description: Excitation current to apply to RTD.
+    enum: [250, 500, 750, 1000]
+    default: 250
+
+  adi,ext1-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT1.
+
+  adi,ext1-burnout-current-nanoamp:
+    description:
+      Burnout current in nanoamps to be applied to EXT1.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext1-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT1 is sinking.
+      When present, the burnout current polarity for EXT1 is sourcing.
+
+  adi,ext2-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT2.
+
+  adi,ext2-burnout-current-nanoamp:
+    description: Burnout current in nanoamps to be applied to EXT2.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext2-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT2 is sinking.
+      When present, the burnout current polarity for EXT2 is sourcing.
+
+  adi,viout-burnout:
+    type: boolean
+    description: Whether to enable burnout current for VIOUT.
+
+  adi,viout-burnout-current-nanoamp:
+    description: Burnout current in nanoamps to be applied to VIOUT.
+    enum: [0, 1000, 10000]
+    default: 0
+
+  adi,viout-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for VIOUT is sinking.
+      When present, the burnout current polarity for VIOUT is sourcing.
+
+  adi,gpio0-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Comparator output
+      3 - Control HART CD
+      4 - Monitor HART CD
+      5 - Monitor HART EOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio1-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive external digital output FET
+      3 - Control HART RXD
+      4 - Monitor HART RXD
+      5 - Monitor HART SOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio2-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive internal digital output FET
+      3 - Control HART TXD
+      4 - Monitor HART TXD
+      5 - Monitor HART TX complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio3-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - High impedance
+      3 - Control HART RTS
+      4 - Monitor HART RTS
+      5 - Monitor HART CD complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpol
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - adi,digital-input-sink-range-high
+    then:
+      properties:
+        adi,digital-input-sink-microamp:
+          maximum: 7400
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74115h";
+        reg = <0>;
+
+        spi-max-frequency = <12000000>;
+        spi-cpol;
+
+        reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "adc_rdy";
+
+        avdd-supply = <&ad74115_avdd>;
+
+        adi,ch-func = <1>;
+        adi,conv2-mux = <2>;
+        adi,conv2-range-microvolt = <(-12000000) 12000000>;
+
+        adi,gpio0-mode = <1>;
+        adi,gpio1-mode = <1>;
+        adi,gpio2-mode = <1>;
+        adi,gpio3-mode = <1>;
+
+        adi,dac-bipolar;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 0000000000..590ea7936a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+      drive-strength-microamp:
+        description: |
+          For channels configured as digital input, this configures the sink
+          current.
+        minimum: 0
+        maximum: 1800
+        default: 0
+        multipleOf: 120
+
+    required:
+      - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
new file mode 100644
index 0000000000..527501c1d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/current-sense-amplifier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Current Sense Amplifier
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  When an io-channel measures the output voltage from a current sense
+  amplifier, the interesting measurement is almost always the current
+  through the sense resistor, not the voltage output. This binding
+  describes such a current sense circuit.
+
+properties:
+  compatible:
+    const: current-sense-amplifier
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  sense-resistor-micro-ohms:
+    description: The sense resistance.
+
+  sense-gain-mult:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Amplifier gain multiplier. The default is <1>.
+
+  sense-gain-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Amplifier gain divider. The default is <1>.
+
+required:
+  - compatible
+  - io-channels
+  - sense-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    sysi {
+        compatible = "current-sense-amplifier";
+        io-channels = <&tiadc 0>;
+
+        sense-resistor-micro-ohms = <20000>;
+        sense-gain-mult = <50>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml
new file mode 100644
index 0000000000..f8a112c9a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/current-sense-shunt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Current Sense Shunt
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  When an io-channel measures the voltage over a current sense shunt,
+  the interesting measurement is almost always the current through the
+  shunt, not the voltage over it. This binding describes such a current
+  sense circuit.
+
+properties:
+  compatible:
+    const: current-sense-shunt
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  "#io-channel-cells":
+    const: 0
+
+  shunt-resistor-micro-ohms:
+    description: The shunt resistance.
+
+required:
+  - compatible
+  - io-channels
+  - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tiadc: adc@48 {
+            compatible = "ti,ads1015";
+            reg = <0x48>;
+            #io-channel-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 { /* IN0,IN1 differential */
+                reg = <0>;
+                ti,gain = <1>;
+                ti,datarate = <4>;
+            };
+        };
+    };
+    sysi {
+        compatible = "current-sense-shunt";
+        io-channels = <&tiadc 0>;
+        #io-channel-cells = <0>;
+
+        /* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */
+        shunt-resistor-micro-ohms = <3300000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
new file mode 100644
index 0000000000..336ce96371
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sense RTD
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
+  used to get a linear voltage to temperature reading within a give range
+  (usually 0 to 100 degrees Celsius).
+
+  When an io-channel measures the output voltage across an RTD such as a
+  PT1000, the interesting measurement is almost always the corresponding
+  temperature, not the voltage output. This binding describes such a circuit.
+
+  The general transfer function here is (using SI units)
+
+    V = R(T) * iexc
+    R(T) = r0 * (1 + alpha * T)
+    T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
+
+  The following circuit matches what's in the examples section.
+
+           5V0
+          -----
+            |
+        +---+----+
+        |  R 5k  |
+        +---+----+
+            |
+            V 1mA
+            |
+            +---- Vout
+            |
+        +---+----+
+        | PT1000 |
+        +---+----+
+            |
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-sense-rtd
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  excitation-current-microamp:
+    description: The current fed through the RTD sensor.
+
+  alpha-ppm-per-celsius:
+    description: |
+      alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
+      approximation of the resistance versus temperature relationship
+      between 0 and 100 degrees Celsius.
+
+      alpha = (R_100 - R_0) / (100 * R_0)
+
+      Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
+      R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
+      Celsius.
+
+      Pure platinum has an alpha of 3925. Industry standards such as IEC60751
+      and ASTM E-1137 specify an alpha of 3850.
+
+  r-naught-ohms:
+    description: |
+      Resistance of the sensor at 0 degrees Celsius.
+      Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
+
+additionalProperties: false
+required:
+  - compatible
+  - io-channels
+  - excitation-current-microamp
+  - alpha-ppm-per-celsius
+  - r-naught-ohms
+
+examples:
+  - |
+    pt1000_1: temperature-sensor0 {
+        compatible = "temperature-sense-rtd";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc1 0>;
+
+        excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
+        alpha-ppm-per-celsius = <3908>;
+        r-naught-ohms = <1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
new file mode 100644
index 0000000000..cfbf5350db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Transducer
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  A temperature transducer is a device that converts a thermal quantity
+  into any other physical quantity. This binding applies to temperature to
+  voltage (like the LTC2997), and temperature to current (like the AD590)
+  linear transducers.
+  In both cases these are assumed to be connected to a voltage ADC.
+
+  When an io-channel measures the output voltage of a temperature analog front
+  end such as a temperature transducer, the interesting measurement is almost
+  always the corresponding temperature, not the voltage output. This binding
+  describes such a circuit.
+
+  The general transfer function here is (using SI units)
+    V(T) = Rsense * Isense(T)
+    T = (Isense(T) / alpha) + offset
+    T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha)
+
+  When using a temperature to voltage transducer, Rsense is set to 1.
+
+  The following circuits show a temperature to current and a temperature to
+  voltage transducer that can be used with this binding.
+
+           VCC
+          -----
+            |
+        +---+---+
+        | AD590 |                               VCC
+        +---+---+                              -----
+            |                                    |
+            V proportional to T             +----+----+
+            |                          D+ --+         |
+            +---- Vout                      | LTC2997 +--- Vout
+            |                          D- --+         |
+        +---+----+                          +---------+
+        | Rsense |                               |
+        +---+----+                             -----
+            |                                   GND
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-transducer
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  sense-offset-millicelsius:
+    description: |
+      Temperature offset.
+      This offset is commonly used to convert from Kelvins to degrees Celsius.
+      In that case, sense-offset-millicelsius would be set to <(-273150)>.
+    default: 0
+
+  sense-resistor-ohms:
+    description: |
+      The sense resistor.
+      By default sense-resistor-ohms cancels out the resistor making the
+      circuit behave like a temperature transducer.
+    default: 1
+
+  alpha-ppm-per-celsius:
+    description: |
+      Sometimes referred to as output gain, slope, or temperature coefficient.
+
+      alpha is expressed in parts per million which can be micro-amps per
+      degrees Celsius or micro-volts per degrees Celsius. The is the main
+      characteristic of a temperature transducer and should be stated in the
+      datasheet.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - alpha-ppm-per-celsius
+
+examples:
+  - |
+    ad950: temperature-sensor-0 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 3>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        sense-resistor-ohms = <8060>;
+        alpha-ppm-per-celsius = <1>; /* 1 uA/K */
+    };
+  - |
+    znq_tmp: temperature-sensor-1 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 2>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
new file mode 100644
index 0000000000..dddf97b505
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/voltage-divider.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltage divider
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  When an io-channel measures the midpoint of a voltage divider, the
+  interesting voltage is often the voltage over the full resistance
+  of the divider. This binding describes the voltage divider in such
+  a circuit.
+
+    Vin ----.
+            |
+         .-----.
+         |  R  |
+         '-----'
+            |
+            +---- Vout
+            |
+         .-----.
+         | Rout|
+         '-----'
+            |
+           GND
+
+
+properties:
+  compatible:
+    const: voltage-divider
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  output-ohms:
+    description:
+      Resistance Rout over which the output voltage is measured. See full-ohms.
+
+  full-ohms:
+    description:
+      Resistance R + Rout for the full divider. The io-channel is scaled by
+      the Rout / (R + Rout) quotient.
+
+required:
+  - compatible
+  - io-channels
+  - output-ohms
+  - full-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /*
+     * The system voltage is circa 12V, but divided down with a 22/222
+     * voltage divider (R = 200 Ohms, Rout = 22 Ohms) and fed to an ADC.
+     */
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        maxadc: adc@0 {
+            compatible = "maxim,max1027";
+            reg = <0>;
+            #io-channel-cells = <1>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <1000000>;
+        };
+    };
+    sysv {
+        compatible = "voltage-divider";
+        io-channels = <&maxadc 1>;
+
+        /* Scale the system voltage by 22/222 to fit the ADC range. */
+        output-ohms = <22>;
+        full-ohms = <222>; /* 200 + 22 */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
new file mode 100644
index 0000000000..c15da155d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ada4250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADA4250 Programmable Gain Instrumentation Amplifier
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
+
+properties:
+  compatible:
+    enum:
+      - adi,ada4250
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+
+  adi,refbuf-enable:
+    description:
+      Enable internal buffer to drive the reference pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      amplifier@0 {
+        compatible = "adi,ada4250";
+        reg = <0>;
+        avdd-supply = <&avdd>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
new file mode 100644
index 0000000000..9fda56fa49
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HMC425A 6-bit Digital Step Attenuator
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Digital Step Attenuator IIO device with gpio interface.
+  HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
+  https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,hmc425a
+
+  vcc-supply: true
+
+  ctrl-gpios:
+    description:
+      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
+      connected to the control pins V1-V6.
+    minItems: 6
+    maxItems: 6
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    gpio_hmc425a: hmc425a {
+      compatible = "adi,hmc425a";
+      ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>,
+        <&gpio 39 GPIO_ACTIVE_HIGH>,
+        <&gpio 38 GPIO_ACTIVE_HIGH>,
+        <&gpio 37 GPIO_ACTIVE_HIGH>,
+        <&gpio 36 GPIO_ACTIVE_HIGH>,
+        <&gpio 35 GPIO_ACTIVE_HIGH>;
+      vcc-supply = <&foo>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
new file mode 100644
index 0000000000..3d7074fd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog device AD7150 and similar capacitance to digital converters.
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7150
+      - adi,ad7151
+      - adi,ad7156
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7150
+              - adi,ad7156
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7151
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdc@48 {
+            compatible = "adi,ad7150";
+            reg = <0x48>;
+            interrupts = <25 2>, <26 2>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
new file mode 100644
index 0000000000..a02036ef9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+  Specifications about the part can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7745
+      - adi,ad7746
+      - adi,ad7747
+
+  reg:
+    maxItems: 1
+
+  adi,excitation-vdd-permille:
+    description: |
+      Set VDD per mille to be used as the excitation voltage.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [125, 250, 375, 500]
+
+  adi,exca-output-en:
+    description: Enables the EXCA pin as the excitation output.
+    type: boolean
+
+  adi,exca-output-invert:
+    description: |
+      Inverts the excitation output in the EXCA pin.
+      Normally only one of the EXCX pins would be inverted, check the following
+      application notes for more details
+      https://www.analog.com/media/en/technical-documentation/application-notes/AN-1585.pdf
+    type: boolean
+
+  adi,excb-output-en:
+    description: Enables the EXCB pin as the excitation output.
+    type: boolean
+
+  adi,excb-output-invert:
+    description: Inverts the excitation output in the EXCB pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7746: cdc@48 {
+        compatible = "adi,ad7746";
+        reg = <0x48>;
+        adi,excitation-vdd-permille = <125>;
+
+        adi,exca-output-en;
+        adi,exca-output-invert;
+        adi,excb-output-en;
+        adi,excb-output-invert;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml
new file mode 100644
index 0000000000..52341c8bac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/ams,ccs811.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/ams,ccs811.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS CCS811 VOC Sensor
+
+maintainers:
+  - Narcisa Vasile <narcisaanamaria12@gmail.com>
+
+description: |
+  Ultra-Low Power Digital Gas Sensor for Monitoring Indoor Air Quality.
+
+properties:
+  compatible:
+    enum:
+      - ams,ccs811
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the nRESET line. This is an active low
+                 input to CCS811.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: GPIO connected to the nWAKE line. This is an active low
+                 input to CCS811.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      voc@5b {
+        compatible = "ams,ccs811";
+        reg = <0x5b>;
+        reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+        wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
new file mode 100644
index 0000000000..4646deeb6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,sensor.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/atlas,sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atlas Scientific OEM + EZO sensors
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Atlas Scientific OEM + EZO sensors connected via I2C
+
+  Datasheets:
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/DO_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/EC_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_oem/RTD_oem_datasheet.pdf
+    http://www.atlas-scientific.com/_files/_datasheets/_probe/EZO_CO2_Datasheet.pdf
+    https://www.atlas-scientific.com/files/EZO_O2_datasheet.pdf
+    https://www.atlas-scientific.com/files/EZO_HUM_Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - atlas,do-sm
+      - atlas,ec-sm
+      - atlas,orp-sm
+      - atlas,ph-sm
+      - atlas,rtd-sm
+      - atlas,co2-ezo
+      - atlas,o2-ezo
+      - atlas,hum-ezo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      atlas@66 {
+        compatible = "atlas,orp-sm";
+        reg = <0x66>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
new file mode 100644
index 0000000000..1fe5615740
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/plantower,pms7003.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Plantower PMS7003 air pollution sensor
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Air pollution sensor capable of measuring mass concentration of dust
+  particles.
+
+properties:
+  compatible:
+    enum:
+      - plantower,pms1003
+      - plantower,pms3003
+      - plantower,pms5003
+      - plantower,pms6003
+      - plantower,pms7003
+      - plantower,pmsa003
+
+  vcc-supply:
+    description: regulator that provides power to the sensor
+
+  plantower,set-gpios:
+    description: GPIO connected to the SET line
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RESET line
+    maxItems: 1
+
+required:
+  - compatible
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      air-pollution-sensor {
+        compatible = "plantower,pms7003";
+        vcc-supply = <&reg_vcc5v0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
new file mode 100644
index 0000000000..337fe09e4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/senseair,sunrise.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Senseair Sunrise 006-0-0007 CO2 Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  Senseair Sunrise 006-0-0007 is a NDIR CO2 sensor. It supports I2C or UART buses
+  for communications and control.
+
+  Datasheets:
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSP11704.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSH11649.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Market/publicerat/TDE7318.pdf
+
+properties:
+  compatible:
+    const: senseair,sunrise-006-0-0007
+
+  reg:
+    maxItems: 1
+
+  ndry-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the nDRY pin. Typically active low.
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the EN pin. Typically active high.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@68 {
+        compatible = "senseair,sunrise-006-0-0007";
+        reg = <0x68>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
new file mode 100644
index 0000000000..40d87346ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD30 carbon dioxide sensor
+
+maintainers:
+  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd30
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  sensirion,sel-gpios:
+    description: GPIO connected to the SEL line
+    maxItems: 1
+
+  sensirion,pwm-gpios:
+    description: GPIO connected to the PWM line
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@61 {
+        compatible = "sensirion,scd30";
+        reg = <0x61>;
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    serial {
+      co2-sensor {
+        compatible = "sensirion,scd30";
+        vdd-supply = <&vdd>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
new file mode 100644
index 0000000000..798f48d052
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd4x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD4X carbon dioxide sensor
+
+maintainers:
+  - Roan van Dijk <roan@protonic.nl>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd40
+      - sensirion,scd41
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@62 {
+        compatible = "sensirion,scd41";
+        reg = <0x62>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
new file mode 100644
index 0000000000..967500b7e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SPS30 particulate matter sensor
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Air pollution sensor capable of measuring mass concentration of dust
+  particles.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,sps30
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      air-pollution-sensor@69 {
+        compatible = "sensirion,sps30";
+        reg = <0x69>;
+      };
+    };
+  - |
+    serial {
+      air-pollution-sensor {
+        compatible = "sensirion,sps30";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
new file mode 100644
index 0000000000..b3a10af86d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/common.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for iio sensors
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  This document defines device tree properties common to several iio
+  sensors. It doesn't constitute a device tree binding specification by itself but
+  is meant to be referenced by device tree bindings.
+
+  When referenced from sensor tree bindings the properties defined in this
+  document are defined as follows. The sensor tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  proximity-near-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For proximity sensors whether an object can be considered near to the
+      device depends on parameters like sensor position, covering glass and
+      aperture. This value gives an indication to userspace for which
+      sensor readings this is the case.
+
+      Raw proximity values equal or above this level should be
+      considered 'near' to the device (an object is near to the
+      sensor).
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 0000000000..96340a0575
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3542r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        additionalProperties: false
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p-inv-log2:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n-inv-log2:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p-inv-log2
+          - adi,gain-scaling-n-inv-log2
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ad3552r@0 {
+            compatible = "adi,ad3552r";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,output-range-microvolt = <0 10000000>;
+            };
+            channel@1 {
+                reg = <1>;
+                custom-output-range-config {
+                    adi,gain-offset = <5>;
+                    adi,gain-scaling-p-inv-log2 = <1>;
+                    adi,gain-scaling-n-inv-log2 = <2>;
+                    adi,rfb-ohms = <1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
new file mode 100644
index 0000000000..c04165fa92
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5064 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+   A range of similar DAC devices with between 1 and 12 channels. Some parts
+   have internal references, others require a single shared external reference
+   and the remainder have a separate reference pin for each DAC.
+
+properties:
+  compatible:
+    oneOf:
+      - description: I2C devics
+        enum:
+          - adi,ad5024
+          - adi,ad5025
+          - adi,ad5044
+          - adi,ad5045
+          - adi,ad5064
+          - adi,ad5064-1
+          - adi,ad5065
+          - adi,ad5628-1
+          - adi,ad5628-2
+          - adi,ad5648-1
+          - adi,ad5648-2
+          - adi,ad5666-1
+          - adi,ad5666-2
+          - adi,ad5668-1
+          - adi,ad5668-2
+          - adi,ad5668-3
+      - description: SPI devices
+        enum:
+          - adi,ad5625
+          - adi,ad5625r-1v25
+          - adi,ad5625r-2v5
+          - adi,ad5627
+          - adi,ad5627r-1v25
+          - adi,ad5627r-2v5
+          - adi,ad5629-1
+          - adi,ad5629-2
+          - adi,ad5629-3
+          - adi,ad5645r-1v25
+          - adi,ad5645r-2v5
+          - adi,ad5665
+          - adi,ad5665r-1v25
+          - adi,ad5665r-2v5
+          - adi,ad5667
+          - adi,ad5667r-1v25
+          - adi,ad5667r-2v5
+          - adi,ad5669-1
+          - adi,ad5669-2
+          - adi,ad5669-3
+          - lltc,ltc2606
+          - lltc,ltc2607
+          - lltc,ltc2609
+          - lltc,ltc2616
+          - lltc,ltc2617
+          - lltc,ltc2619
+          - lltc,ltc2626
+          - lltc,ltc2627
+          - lltc,ltc2629
+          - lltc,ltc2631-l12
+          - lltc,ltc2631-h12
+          - lltc,ltc2631-l10
+          - lltc,ltc2631-h10
+          - lltc,ltc2631-l8
+          - lltc,ltc2631-h8
+          - lltc,ltc2633-l12
+          - lltc,ltc2633-h12
+          - lltc,ltc2633-l10
+          - lltc,ltc2633-h10
+          - lltc,ltc2633-l8
+          - lltc,ltc2633-h8
+          - lltc,ltc2635-l12
+          - lltc,ltc2635-h12
+          - lltc,ltc2635-l10
+          - lltc,ltc2635-h10
+          - lltc,ltc2635-l8
+          - lltc,ltc2635-h8
+
+  reg:
+    maxItems: 1
+
+  vrefA-supply: true
+  vrefB-supply: true
+  vrefC-supply: true
+  vrefD-supply: true
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - # Shared external vref, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5064-1
+              - adi,ad5625
+              - adi,ad5627
+              - adi,ad5665
+              - adi,ad5667
+              - lltc,ltc2606
+              - lltc,ltc2607
+              - lltc,ltc2616
+              - lltc,ltc2617
+              - lltc,ltc2626
+              - lltc,ltc2627
+    then:
+      properties:
+        vref-supply: true
+        vrefA-supply: false
+        vrefB-supply: false
+        vrefC-supply: false
+        vrefD-supply: false
+      required:
+        - vref-supply
+  - # Shared external vref, internal reference available
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5625r-1v25
+              - adi,ad5625r-2v5
+              - adi,ad5627r-1v25
+              - adi,ad5627r-2v5
+              - adi,ad5628-1
+              - adi,ad5628-2
+              - adi,ad5629-1
+              - adi,ad5629-2
+              - adi,ad5629-3
+              - adi,ad5645r-1v25
+              - adi,ad5645r-2v5
+              - adi,ad5647r-1v25
+              - adi,ad5647r-2v5
+              - adi,ad5648-1
+              - adi,ad5648-2
+              - adi,ad5665r-1v25
+              - adi,ad5665r-2v5
+              - adi,ad5666-1
+              - adi,ad5666-2
+              - adi,ad5667r-1v25
+              - adi,ad5667r-2v5
+              - adi,ad5668-1
+              - adi,ad5668-2
+              - adi,ad5668-3
+              - adi,ad5669-1
+              - adi,ad5669-2
+              - adi,ad5669-3
+              - lltc,ltc2631-l12
+              - lltc,ltc2631-h12
+              - lltc,ltc2631-l10
+              - lltc,ltc2631-h10
+              - lltc,ltc2631-l8
+              - lltc,ltc2631-h8
+              - lltc,ltc2633-l12
+              - lltc,ltc2633-h12
+              - lltc,ltc2633-l10
+              - lltc,ltc2633-h10
+              - lltc,ltc2633-l8
+              - lltc,ltc2633-h8
+              - lltc,ltc2635-l12
+              - lltc,ltc2635-h12
+              - lltc,ltc2635-l10
+              - lltc,ltc2635-h10
+              - lltc,ltc2635-l8
+              - lltc,ltc2635-h8
+    then:
+      properties:
+        vref-supply: true
+        vrefA-supply: false
+        vrefB-supply: false
+        vrefC-supply: false
+        vrefD-supply: false
+  - # 4 input devices, separate vrefs, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5024
+              - adi,ad5044
+              - adi,ad5064
+              - lltc,ltc2609
+              - lltc,ltc2619
+              - lltc,ltc2629
+    then:
+      properties:
+        vrefA-supply: true
+        vrefB-supply: true
+        vrefC-supply: true
+        vrefD-supply: true
+        vref-supply: false
+      required:
+        - vrefA-supply
+        - vrefB-supply
+        - vrefC-supply
+        - vrefD-supply
+  - # 2 input devices, separate vrefs, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5025
+              - adi,ad5045
+              - adi,ad5065
+    then:
+      properties:
+        vrefA-supply: true
+        vrefB-supply: true
+        vrefC-supply: false
+        vrefD-supply: false
+        vref-supply: false
+      required:
+        - vrefA-supply
+        - vrefB-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5625";
+            vref-supply = <&dac_vref>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5625r-1v25";
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@42 {
+            reg = <0x42>;
+            compatible = "adi,ad5024";
+            vrefA-supply = <&dac_vref>;
+            vrefB-supply = <&dac_vref>;
+            vrefC-supply = <&dac_vref2>;
+            vrefD-supply = <&dac_vref2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
new file mode 100644
index 0000000000..86e2884cdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5360 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5360
+      - adi,ad5361
+      - adi,ad5363
+      - adi,ad5370
+      - adi,ad5371
+      - adi,ad5372
+      - adi,ad5373
+
+  reg:
+    maxItems: 1
+
+  vref0-supply: true
+  vref1-supply: true
+  vref2-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref0-supply
+  - vref1-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5360
+              - adi,ad5361
+              - adi,ad5363
+              - adi,ad5370
+              - adi,ad5372
+              - adi,ad5373
+    then:
+      properties:
+        vref2-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5371
+    then:
+      required:
+        - vref2-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5371";
+            vref0-supply = <&dac_vref0>;
+            vref1-supply = <&dac_vref1>;
+            vref2-supply = <&dac_vref2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
new file mode 100644
index 0000000000..9eb9928500
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5380 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  DAC devices supporting both SPI and I2C interfaces.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5380-3
+      - adi,ad5380-5
+      - adi,ad5381-3
+      - adi,ad5381-5
+      - adi,ad5382-3
+      - adi,ad5382-5
+      - adi,ad5383-3
+      - adi,ad5383-5
+      - adi,ad5384-3
+      - adi,ad5384-5
+      - adi,ad5390-3
+      - adi,ad5390-5
+      - adi,ad5391-3
+      - adi,ad5391-5
+      - adi,ad5392-3
+      - adi,ad5392-5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      If not supplied devices will use internal regulators.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+           reg = <0>;
+           compatible = "adi,ad5390-5";
+           vref-supply = <&dacvref>;
+        };
+    };
+  - |
+    i2c {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       dac@42 {
+          reg = <0x42>;
+          compatible = "adi,ad5380-3";
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
new file mode 100644
index 0000000000..52d089ebde
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5421.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5421 DAC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  AD5421 is designed for us in loop-powered, 4 mA to 20 mA smart transmitter
+  applications. It provides a 16-bit DAC, current amplifier, voltage regulator
+  to drive the loop and a voltage reference.
+
+properties:
+  compatible:
+    const: adi,ad5421
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Fault signal.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5421";
+            reg = <0>;
+            spi-max-frequency = <30000000>;
+            interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
new file mode 100644
index 0000000000..d2af2d4919
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5449.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5449 and similar DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Family of multiplying DACs from Analog Devices
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5415
+      - adi,ad5426
+      - adi,ad5429
+      - adi,ad5432
+      - adi,ad5439
+      - adi,ad5443
+      - adi,ad5449
+
+  reg:
+    maxItems: 1
+
+  VREF-supply: true
+  VREFA-supply: true
+  VREFB-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5415
+              - adi,ad5426
+              - adi,ad5432
+    then:
+      properties:
+        VREF-supply: true
+        VREFA-supply: false
+        VREFB-supply: false
+      required:
+        - VREF-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5429
+              - adi,ad5439
+              - adi,ad5449
+    then:
+      properties:
+        VREF-supply: false
+        VREFA-supply: true
+        VREFB-supply: true
+      required:
+        - VREFA-supply
+        - VREFB-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5415";
+            VREF-supply = <&dac_ref>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5429";
+            VREFA-supply = <&dac_refA>;
+            VREFB-supply = <&dac_refB>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
new file mode 100644
index 0000000000..9c2c038683
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5504.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5501 and AD5504 DACs
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  High voltage (up to 60V) DACs with temperature sensor alarm function
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5501
+      - adi,ad5504
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Used for temperature alarm.
+    maxItems: 1
+
+  vcc-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5504";
+            vcc-supply = <&dac_vcc>;
+            interrupts = <55 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml
new file mode 100644
index 0000000000..30194880f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5592r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5592R/AD5593R DAC/ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5592r
+      - adi,ad5593r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  spi-cpol: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description: If not set internal 2.5V reference used.
+
+  reset-gpios:
+    maxItems: 1
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad5592r
+    then:
+      required:
+        - spi-cpol
+    else:
+      properties:
+        spi-cpol: false
+
+additionalProperties: false
+
+patternProperties:
+  "^(channel@)[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 8]
+        description: |
+          Mode or function of this channel.
+          Macros specifying the valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+
+          The following values are currently supported:
+          * CH_MODE_UNUSED (the pin is unused)
+          * CH_MODE_ADC (the pin is ADC input)
+          * CH_MODE_DAC (the pin is DAC output)
+          * CH_MODE_DAC_AND_ADC (the pin is DAC output but can be monitored
+            by an ADC, since there is no disadvantage this should be
+            considered as the preferred DAC mode)
+          * CH_MODE_GPIO (the pin is registered with GPIOLIB)
+
+      adi,off-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          State of this channel when unused or the device gets removed.
+          Macros specifying the  valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+          * CH_OFFSTATE_PULLDOWN (the pin is pulled down)
+          * CH_OFFSTATE_OUT_LOW  (the pin is output low)
+          * CH_OFFSTATE_OUT_HIGH (the pin is output high)
+          * CH_OFFSTATE_OUT_TRISTATE (the pin is tristated output)
+
+    required:
+      - reg
+      - adi,mode
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adi,ad5592r.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        addac@0 {
+            compatible = "adi,ad5592r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            vref-supply = <&vref>;
+            reset-gpios = <&gpio0 86 0>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@4 {
+                reg = <4>;
+                adi,mode = <CH_MODE_UNUSED>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@5 {
+                reg = <5>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@7 {
+                reg = <7>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+        ad5593r@10 {
+            compatible = "adi,ad5593r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0x10>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
new file mode 100644
index 0000000000..4d5111a5f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5624r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5624r and similar DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5624r3
+      - adi,ad5644r3
+      - adi,ad5664r3
+      - adi,ad5624r5
+      - adi,ad5644r5
+      - adi,ad5664r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: If not present, internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5624r3";
+            vref-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
new file mode 100644
index 0000000000..b4400c52be
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5360 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: SPI devices
+        enum:
+          - adi,ad5310r
+          - adi,ad5672r
+          - adi,ad5674r
+          - adi,ad5676
+          - adi,ad5676r
+          - adi,ad5679r
+          - adi,ad5681r
+          - adi,ad5682r
+          - adi,ad5683
+          - adi,ad5683r
+          - adi,ad5684
+          - adi,ad5684r
+          - adi,ad5685r
+          - adi,ad5686
+          - adi,ad5686r
+      - description: I2C devices
+        enum:
+          - adi,ad5311r
+          - adi,ad5337r
+          - adi,ad5338r
+          - adi,ad5671r
+          - adi,ad5675r
+          - adi,ad5691r
+          - adi,ad5692r
+          - adi,ad5693
+          - adi,ad5693r
+          - adi,ad5694
+          - adi,ad5694r
+          - adi,ad5695r
+          - adi,ad5696
+          - adi,ad5696r
+
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: If not supplied the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            reg = <0>;
+            compatible = "adi,ad5310r";
+            vcc-supply = <&dac_vref0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
new file mode 100644
index 0000000000..56b0cda0f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5696 and similar multi-channel DACs
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+description: |
+  Binding for Analog Devices AD5696 and similar multi-channel DACs
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5311r
+      - adi,ad5338r
+      - adi,ad5671r
+      - adi,ad5675r
+      - adi,ad5691r
+      - adi,ad5692r
+      - adi,ad5693
+      - adi,ad5693r
+      - adi,ad5694
+      - adi,ad5694r
+      - adi,ad5695r
+      - adi,ad5696
+      - adi,ad5696r
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: |
+      The regulator supply for DAC reference voltage.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad5696: dac@0 {
+        compatible = "adi,ad5696";
+        reg = <0>;
+        vcc-supply = <&dac_vref>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
new file mode 100644
index 0000000000..9a3c2926bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5755.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5755 Multi-Channel DAC
+
+maintainers:
+  - Sean Nyekjaer <sean.nyekjaer@prevas.dk>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5755
+      - adi,ad5755-1
+      - adi,ad5757
+      - adi,ad5735
+      - adi,ad5737
+
+  reg:
+    maxItems: 1
+
+  spi-cpha:
+    description: Either this or spi-cpol but not both.
+  spi-cpol: true
+
+  adi,ext-dc-dc-compenstation-resistor:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the hardware have an external resistor and thereby bypasses
+      the internal compensation resistor.
+
+  adi,dc-dc-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Valid values for DC DC Phase control is:
+      0: All dc-to-dc converters clock on the same edge.
+      1: Channel A and Channel B clock on the same edge,
+         Channel C and Channel D clock on opposite edges.
+      2: Channel A and Channel C clock on the same edge,
+         Channel B and Channel D clock on opposite edges.
+      3: Channel A, Channel B, Channel C, and Channel D
+         clock 90 degrees out of phase from each other.
+
+  adi,dc-dc-freq-hz:
+    enum: [250000, 410000, 650000]
+
+  adi,dc-dc-max-microvolt:
+    description:
+      Maximum allowed Vboost voltage supplied by the dc-to-dc converter.
+    enum: [23000000, 24500000, 27000000, 29500000]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        maxItems: 1
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 6
+        description: |
+          Valid values for DAC modes is:
+          0: 0 V to 5 V voltage range.
+          1: 0 V to 10 V voltage range.
+          2: Plus minus 5 V voltage range.
+          3: Plus minus 10 V voltage range.
+          4: 4 mA to 20 mA current range.
+          5: 0 mA to 20 mA current range.
+          6: 0 mA to 24 mA current range.
+
+      adi,ext-current-sense-resistor:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Set if the hardware has an external current sense resistor
+
+      adi,enable-voltage-overrange:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: Enable voltage overrange
+
+      adi,slew:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          Array of slewrate settings should contain 3 fields:
+          1: Should be either 0 or 1 in order to enable or disable slewrate.
+          2: Slew rate update frequency
+          3: Slew step size
+        items:
+          - enum: [0, 1]
+          - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0]
+          - enum: [1, 2, 4, 16, 32, 64, 128, 256]
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+oneOf:
+  - required:
+      - spi-cpha
+  - required:
+      - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "adi,ad5755";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+            adi,dc-dc-phase = <0>;
+            adi,dc-dc-freq-hz = <410000>;
+            adi,dc-dc-max-microvolt = <23000000>;
+            channel@0 {
+                reg = <0>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <4>;
+                adi,ext-current-sense-resistor;
+                adi,slew = <0 64000 1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
new file mode 100644
index 0000000000..5121685337
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5758 DAC
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+properties:
+  compatible:
+    const: adi,ad5758
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  adi,dc-dc-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description: |
+      Mode of operation of the dc-to-dc converter
+      Dynamic Power Control (DPC)
+      In this mode, the AD5758 circuitry senses the output voltage and
+      dynamically regulates the supply voltage, VDPC+, to meet compliance
+      requirements plus an optimized headroom voltage for the output buffer.
+
+      Programmable Power Control (PPC)
+      In this mode, the VDPC+ voltage is user-programmable to a fixed level
+      that needs to accommodate the maximum output load required.
+
+      The output of the DAC core is either converted to a current or
+      voltage output at the VIOUT pin. Only one mode can be enabled at
+      any one time.
+
+      The following values are currently supported:
+      * 1: DPC current mode
+      * 2: DPC voltage mode
+      * 3: PPC current mode
+
+      Depending on the selected output mode (voltage or current) one of the
+      two properties must be present:
+
+  adi,range-microvolt:
+    description: |
+      Voltage output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [5000000, 10000000]
+      - items:
+          - const: -5000000
+          - const: 5000000
+      - items:
+          - const: -10000000
+          - const: 10000000
+
+  adi,range-microamp:
+    description: |
+      Current output range specified as <minimum, maximum>
+    oneOf:
+      - items:
+          - const: 0
+          - enum: [20000, 24000]
+      - items:
+          - const: 4
+          - const: 24000
+      - items:
+          - const: -20000
+          - const: 20000
+      - items:
+          - const: -24000
+          - const: 24000
+      - items:
+          - const: -1000
+          - const: 22000
+
+  reset-gpios:
+    maxItems: 1
+
+  adi,dc-dc-ilim-microamp:
+    enum: [150000, 200000, 250000, 300000, 350000, 400000]
+    description: |
+      The dc-to-dc converter current limit.
+
+  adi,slew-time-us:
+    description: |
+      The time it takes for the output to reach the full scale [uS]
+    minimum: 133
+    maximum: 1023984375
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - adi,dc-dc-mode
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        adi,dc-dc-mode:
+          enum: [1, 3]
+    then:
+      properties:
+        adi,range-microvolt: false
+      required:
+        - adi,range-microamp
+    else:
+      properties:
+        adi,range-microamp: false
+      required:
+        - adi,range-microvolt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5758";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpha;
+
+            reset-gpios = <&gpio 22 0>;
+
+            adi,dc-dc-mode = <2>;
+            adi,range-microvolt = <0 10000000>;
+            adi,dc-dc-ilim-microamp = <200000>;
+            adi,slew-time-us = <125000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
new file mode 100644
index 0000000000..df550b5af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5761 and similar DACs
+
+maintainers:
+  - Ricardo Ribalda <ribalda@kernel.org>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5721
+      - adi,ad5721r
+      - adi,ad5761
+      - adi,ad5761r
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description: If not supplied, internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5721
+              - adi,ad5761
+    then:
+      required:
+        - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5721";
+            reg = <0>;
+            vref-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
new file mode 100644
index 0000000000..0b409a727a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5744 and AD5764 DAC families
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5744
+      - adi,ad5744r
+      - adi,ad5764
+      - adi,ad5764r
+
+  reg:
+    maxItems: 1
+
+  vrefAB-supply: true
+  vrefCD-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5744
+              - adi,ad5764
+    then:
+      required:
+        - vrefAB-supply
+        - vrefCD-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5744";
+            reg = <0>;
+            vrefAB-supply = <&dac_vref>;
+            vrefCD-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
new file mode 100644
index 0000000000..212c936bab
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5766.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5766 DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad5766-5767.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5766
+      - adi,ad5767
+
+  output-range-microvolts:
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    maxItems: 2
+    description: Select converter output range.
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. As the line is active low, it
+      should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+required:
+  - compatible
+  - output-range-microvolts
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5766@0 {
+            compatible = "adi,ad5766";
+            output-range-microvolts = <(-5000000) 5000000>;
+            reg = <0>;
+            spi-cpol;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio 22 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
new file mode 100644
index 0000000000..82b0eed6a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5770R DAC device driver
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5770r
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      AVdd voltage supply. Represents two different supplies in the datasheet
+      that are in fact the same.
+
+  iovdd-supply:
+    description:
+      Voltage supply for the chip interface.
+
+  vref-supply:
+    description: Specify the voltage of the external reference used.
+      Available reference options are 1.25 V or 2.5 V. If no
+      external reference declared then the device will use the
+      internal reference of 1.25 V.
+
+  adi,external-resistor:
+    description: Specify if an external 2.5k ohm resistor is used. If not
+      specified the device will use an internal 2.5k ohm resistor.
+      The precision resistor is used for reference current generation.
+    type: boolean
+
+  reset-gpios:
+    description: GPIO spec for the RESET pin. If specified, it will be
+      asserted during driver probe.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  channel@0:
+    description: Represents an external channel which are
+      connected to the DAC. Channel 0 can act both as a current
+      source and sink.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 0
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 300000
+          - items:
+              - const: -60000
+              - const: 0
+          - items:
+              - const: -60000
+              - const: 300000
+
+  channel@1:
+    description: Represents an external channel which are
+      connected to the DAC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 1
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [140000, 250000]
+
+  channel@2:
+    description: Represents an external channel which are
+      connected to the DAC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: This represents the channel number.
+        const: 2
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [55000, 150000]
+
+patternProperties:
+  "^channel@([3-5])$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the DAC.
+    properties:
+      reg:
+        description: This represents the channel number.
+        minimum: 3
+        maximum: 5
+
+      adi,range-microamp:
+        description: Output range of the channel.
+        items:
+          - const: 0
+          - enum: [45000, 100000]
+
+required:
+  - reg
+  - channel@0
+  - channel@1
+  - channel@2
+  - channel@3
+  - channel@4
+  - channel@5
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5770r@0 {
+            compatible = "adi,ad5770r";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+            adi,external-resistor;
+            reset-gpios = <&gpio 22 0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,range-microamp = <0 300000>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,range-microamp = <0 140000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,range-microamp = <0 55000>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@4 {
+                reg = <4>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@5 {
+                reg = <5>;
+                adi,range-microamp = <0 45000>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
new file mode 100644
index 0000000000..3a84739736
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5791.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5791 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad5760
+      - adi,ad5780
+      - adi,ad5781
+      - adi,ad5790
+      - adi,ad5791
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vss-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vss-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5791";
+            reg = <0>;
+            vss-supply = <&dac_vss>;
+            vdd-supply = <&dac_vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 0000000000..5ee80bf6aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7303.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7303.yaml
new file mode 100644
index 0000000000..1f00371520
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7303.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7303.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7303 DAC
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+properties:
+  compatible:
+    const: adi,ad7303
+
+  reg:
+    maxItems: 1
+
+  Vdd-supply:
+    description:
+      Used to calculate output channel scalling if REF-supply not specified.
+  REF-supply:
+    description:
+      If not provided, Vdd/2 is used as the reference voltage.
+
+  spi-max-frequency:
+    maximum: 30000000
+
+required:
+  - compatible
+  - reg
+  - Vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@4 {
+            compatible = "adi,ad7303";
+            reg = <4>;
+            spi-max-frequency = <10000000>;
+            Vdd-supply = <&vdd_supply>;
+            REF-supply = <&vref_supply>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
new file mode 100644
index 0000000000..1849a2ff05
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad8801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD8801 and AD8803 DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+
+  compatible:
+    enum:
+      - adi,ad8801
+      - adi,ad8803
+
+  reg:
+    maxItems: 1
+
+  vrefh-supply: true
+  vrefl-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefh-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad8803
+    then:
+      required:
+        - vrefl-supply
+    else:
+      properties:
+        vrefl-supply: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad8803";
+            reg = <0>;
+            vrefl-supply = <&dac_vrefl>;
+            vrefh-supply = <&dac_vrefh>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 0000000000..f22ef710ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ltc2688: ltc2688@0 {
+            compatible = "adi,ltc2688";
+            reg = <0>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            vref-supply = <&vref>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,toggle-mode;
+                adi,overrange;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,output-range-microvolt = <0 10000000>;
+
+                clocks = <&clock_tgp3>;
+                adi,toggle-dither-input = <2>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml b/Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml
new file mode 100644
index 0000000000..6a7ca8e432
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/dpot-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DAC emulation using a digital potentiometer
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  It is assumed that the dpot is used as a voltage divider between the
+  current dpot wiper setting and the maximum resistance of the dpot. The
+  divided voltage is provided by a vref regulator.
+
+                  .------.
+   .-----------.  |      |
+   | vref      |--'    .---.
+   | regulator |--.    |   |
+   '-----------'  |    | d |
+                  |    | p |
+                  |    | o |  wiper
+                  |    | t |<---------+
+                  |    |   |
+                  |    '---'       dac output voltage
+                  |      |
+                  '------+------------+
+
+properties:
+  compatible:
+    const: dpot-dac
+
+  vref-supply:
+    description: Regulator supplying the voltage divider.
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of the dpot to be used for the voltage division.
+
+  io-channel-names:
+    const: dpot
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - vref-supply
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dac {
+        compatible = "dpot-dac";
+        vref-supply = <&reg_3v3>;
+        io-channels = <&dpot 0>;
+        io-channel-names = "dpot";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/fsl,vf610-dac.yaml b/Documentation/devicetree/bindings/iio/dac/fsl,vf610-dac.yaml
new file mode 100644
index 0000000000..999c715c61
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/fsl,vf610-dac.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/fsl,vf610-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale vf610 Digital to Analog Converter
+
+maintainers:
+  - Sanchayan Maity <maitysanchayan@gmail.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-dac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dac
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    bus@40000000 {
+        compatible = "fsl,aips-bus", "simple-bus";
+        reg = <0x40000000 0x00070000>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dac@400cc000 {
+            compatible = "fsl,vf610-dac";
+            reg = <0x400cc000 0x1000>;
+            interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "dac";
+            clocks = <&clks VF610_CLK_DAC0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
new file mode 100644
index 0000000000..c9f51d00fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+
+description: |
+  Bindings for the Linear Technology Micropower octal 8-Bit and 10-Bit DAC.
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/166560fa.pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc1660
+      - lltc,ltc1665
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vref-supply:
+    description: Phandle to the external reference voltage supply.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@0 {
+        compatible = "lltc,ltc1660";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        vref-supply = <&vref_reg>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
new file mode 100644
index 0000000000..733edc7d6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Bindings for the Linear Technology LTC2632/2634/2636 DAC
+  Datasheet can be found here: https://www.analog.com/media/en/technical-documentation/data-sheets/LTC263[246].pdf
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2632-l12
+      - lltc,ltc2632-l10
+      - lltc,ltc2632-l8
+      - lltc,ltc2632-h12
+      - lltc,ltc2632-h10
+      - lltc,ltc2632-h8
+      - lltc,ltc2634-l12
+      - lltc,ltc2634-l10
+      - lltc,ltc2634-l8
+      - lltc,ltc2634-h12
+      - lltc,ltc2634-h10
+      - lltc,ltc2634-h8
+      - lltc,ltc2636-l12
+      - lltc,ltc2636-l10
+      - lltc,ltc2636-l8
+      - lltc,ltc2636-h12
+      - lltc,ltc2636-h10
+      - lltc,ltc2636-h8
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  vref-supply:
+    description:
+      Phandle to the external reference voltage supply. This should
+      only be set if there is an external reference voltage connected to the VREF
+      pin. If the property is not set the internal reference is used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    vref: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "vref-ltc2632";
+        regulator-min-microvolt = <1250000>;
+        regulator-max-microvolt = <1250000>;
+        regulator-always-on;
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "lltc,ltc2632-l12";
+            reg = <0>;    /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
new file mode 100644
index 0000000000..264fa7c5fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,ds4424.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC
+
+maintainers:
+  - Ismail Kose <ihkose@gmail.com>
+
+description: |
+  Datasheet publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,ds4422
+      - maxim,ds4424
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@10 {
+            compatible = "maxim,ds4424";
+            reg = <0x10>; /* When A0, A1 pins are ground */
+            vcc-supply = <&vcc_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
new file mode 100644
index 0000000000..24830f56c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs
+
+maintainers:
+  - Angelo Dureghello <angelo.dureghello@timesys.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet available at:
+  https://www.analog.com/en/products/max5522.html
+
+properties:
+  compatible:
+    const: maxim,max5522
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vrefin-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "maxim,max5522";
+            reg = <0>;
+            vrefin-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,max5821.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,max5821.yaml
new file mode 100644
index 0000000000..c43fb5f3f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,max5821.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max5821 dual 10-bit DAC
+
+maintainers:
+  - Philippe Reynes <tremyfr@yahoo.fr>
+
+description: |
+  Datasheet publicly available at:
+  https://datasheets.maximintegrated.com/en/ds/MAX5821.pdf
+
+properties:
+  compatible:
+    const: maxim,max5821
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@38 {
+            compatible = "maxim,max5821";
+            reg = <0x38>;
+            vref-supply = <&reg_max5821>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml
new file mode 100644
index 0000000000..5f5b578316
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4725.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4725.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp4725 and mcp4726 DAC
+
+maintainers:
+  - Tomas Novotny <tomas@novotny.cz>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4725
+      - microchip,mcp4726
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the mcp4725.
+      For the mcp4726 it will be used as the reference voltage if vref-supply
+      is not provided.
+
+  vref-supply:
+    description:
+      Vref pin is used as a voltage reference when this supply is specified.
+
+  microchip,vref-buffered:
+    type: boolean
+    description: |
+      Enable buffering of the external Vref pin. This boolean is not valid
+      without the vref-supply. Quoting the datasheet: This is offered in
+      cases where the reference voltage does not have the current
+      capability not to drop its voltage when connected to the internal
+      resistor ladder circuit.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mcp4725
+    then:
+      properties:
+        vref-supply: false
+      required:
+        - vdd-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mcp4726
+    then:
+      anyOf:
+        - required:
+            - vdd-supply
+        - required:
+            - vref-supply
+
+  - if:
+      not:
+        required:
+          - vref-supply
+    then:
+      properties:
+        microchip,vref-buffered: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mcp4725@60 {
+            compatible = "microchip,mcp4725";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
new file mode 100644
index 0000000000..99831d7f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4728 DAC
+
+maintainers:
+  - Andrea Collamati <andrea.collamati@gmail.com>
+
+description: |
+  MCP4728 is a quad channel, 12-bit voltage output
+  Digital-to-Analog Converter with non-volatile
+  memory and I2C compatible Serial Interface.
+  https://www.microchip.com/en-us/product/mcp4728
+
+properties:
+  compatible:
+    const: microchip,mcp4728
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the MCP4728
+      when Internal Vref is not selected.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@60 {
+            compatible = "microchip,mcp4728";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
new file mode 100644
index 0000000000..19374401e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4902, MCP4912 and MPC4922 dual output SPI DACs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Michael Welling <mwelling@ieee.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4902
+      - microchip,mcp4912
+      - microchip,mcp4921
+      - microchip,mcp4922
+
+  reg:
+    maxItems: 1
+
+  vref-supply: true
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "microchip,mcp4912";
+            reg = <0>;
+            vref-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
new file mode 100644
index 0000000000..9c8afe3f1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC1850 DAC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  Supports the DAC found on the LPC1850 SoC.
+
+properties:
+  compatible:
+    const: nxp,lpc1850-dac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vref-supply: true
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - vref-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dac: dac@400e1000 {
+            compatible = "nxp,lpc1850-dac";
+            reg = <0x400e1000 0x1000>;
+            interrupts = <0>;
+            clocks = <&ccu1 CLK_APB3_DAC>;
+            vref-supply = <&reg_vdda>;
+            resets = <&rgu 42>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
new file mode 100644
index 0000000000..04045b932b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DAC
+
+description: |
+  The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
+  may be configured in 8 or 12-bit mode. It has two output channels, each with
+  its own converter.
+  It has built-in noise and triangle waveform generator and supports external
+  triggers for conversions. The DAC's output buffer allows a high drive output
+  current.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-dac-core
+      - st,stm32h7-dac-core
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vref-supply
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^dac@[1-2]+$":
+    type: object
+    description:
+      A DAC block node should contain at least one subnode, representing an
+      DAC instance/channel available on the machine.
+
+    properties:
+      compatible:
+        const: st,stm32-dac
+
+      reg:
+        description: Must be either 1 or 2, to define (single) channel in use
+        enum: [1, 2]
+
+      '#io-channel-cells':
+        const: 1
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - '#io-channel-cells'
+
+examples:
+  - |
+    // Example on stm32mp157c
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dac: dac@40017000 {
+      compatible = "st,stm32h7-dac-core";
+      reg = <0x40017000 0x400>;
+      clocks = <&rcc DAC12>;
+      clock-names = "pclk";
+      vref-supply = <&vref>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dac@1 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <1>;
+      };
+
+      dac@2 {
+        compatible = "st,stm32-dac";
+        #io-channel-cells = <1>;
+        reg = <2>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
new file mode 100644
index 0000000000..201b04af2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac082s085.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC082s085 and similar DACs
+
+description:
+  A family of Texas Instruments 8/10/12-bit 2/4-channel DACs
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac082s085
+      - ti,dac102s085
+      - ti,dac122s085
+      - ti,dac084s085
+      - ti,dac104s085
+      - ti,dac124s085
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol:
+    description:
+      Must be either spi-cpha, or spi-cpol but not both.
+
+  vref-supply:
+    description: Needed to provide output scaling.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+oneOf:
+  - required:
+      - spi-cpha
+  - required:
+      - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    vref_2v5_reg: regulator-vref {
+        compatible = "regulator-fixed";
+        regulator-name = "2v5";
+        regulator-min-microvolt = <2500000>;
+        regulator-max-microvolt = <2500000>;
+        regulator-always-on;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac082s085";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+            spi-cpol;
+            vref-supply = <&vref_2v5_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
new file mode 100644
index 0000000000..79da0323c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac5571.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC5571 Family
+
+maintainers:
+  - Sean Nyekjaer <sean@geanix.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac5571
+      - ti,dac6571
+      - ti,dac7571
+      - ti,dac5574
+      - ti,dac6574
+      - ti,dac7574
+      - ti,dac5573
+      - ti,dac6573
+      - ti,dac7573
+      - ti,dac121c081
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Reference voltage must be supplied to establish the scaling of the
+      output voltage.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@4c {
+            compatible = "ti,dac5571";
+            reg = <0x4c>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
new file mode 100644
index 0000000000..a6814587db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC5311 and similar SPI DACs
+
+maintainers:
+  - Charles-Antoine Couret <charles-antoine.couret@essensium.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac7311
+      - ti,dac6311
+      - ti,dac5311
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Reference voltage must be supplied to establish the scaling of the
+      output voltage.
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac7311";
+            reg = <0>; /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vdd_supply>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7512.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.yaml
new file mode 100644
index 0000000000..4277cf8a4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7512.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7512.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC7512 DAC
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,dac7512
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Maximum frequency is reduced for supply voltage of less than 3.6V
+    maximum: 30000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "ti,dac7512";
+            reg = <0>; /* CS0 */
+            spi-max-frequency = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
new file mode 100644
index 0000000000..20dd137066
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/ti,dac7612.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DAC7612 family of DACs
+
+description:
+  The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with
+  guaranteed 12-bit monotonicity performance over the industrial temperature
+  range. Is is programmable through an SPI interface.
+
+maintainers:
+  - Ricardo Ribalda Delgado <ricardo@ribalda.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dac7612
+      - ti,dac7612u
+      - ti,dac7612ub
+
+  reg:
+    maxItems: 1
+
+  ti,loaddacs-gpios:
+    description:
+      DACs are loaded when the pin connected to this GPIO is pulled low.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@1 {
+            compatible = "ti,dac7612";
+            reg = <0x1>;
+            ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
new file mode 100644
index 0000000000..b77e855bd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/filter/adi,admv8818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV8818 Digitally Tunable, High-Pass and Low-Pass Filter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+    Fully monolithic microwave integrated circuit (MMIC) that
+    features a digitally selectable frequency of operation.
+    The device features four independently controlled high-pass
+    filters (HPFs) and four independently controlled low-pass filters
+    (LPFs) that span the 2 GHz to 18 GHz frequency range.
+
+    https://www.analog.com/en/products/admv8818.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv8818
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: rf_in
+
+  clock-output-names:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv8818@0 {
+        compatible = "adi,admv8818";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        clocks = <&admv8818_rfin>;
+        clock-names = "rf_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
new file mode 100644
index 0000000000..1cb2adaf66
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers
+
+maintainers:
+  - Popa Stefan <stefan.popa@analog.com>
+
+description: |
+  Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4371
+      - adi,adf4372
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Definition of the external clock (see clock/clock-bindings.txt)
+    maxItems: 1
+
+  clock-names:
+    description:
+      Must be "clkin"
+    maxItems: 1
+
+  adi,mute-till-lock-en:
+    type: boolean
+    description:
+      If this property is present, then the supply current to RF8P and RF8N
+      output stage will shut down until the ADF4371/ADF4372 achieves lock as
+      measured by the digital lock detect circuitry.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        frequency@0 {
+            compatible = "adi,adf4371";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            clocks = <&adf4371_clkin>;
+            clock-names = "clkin";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
new file mode 100644
index 0000000000..43cbf27114
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADF4350/ADF4351 wideband synthesizer
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4350
+      - adi,adf4351
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  clocks:
+    maxItems: 1
+    description: Clock to provide CLKIN reference clock signal.
+
+  clock-names:
+    const: clkin
+
+  gpios:
+    maxItems: 1
+    description: Lock detect GPIO.
+
+  adi,channel-spacing:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel spacing in Hz (influences MODULUS).
+
+  adi,power-up-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      If set the PLL tunes to this frequency (in Hz) on driver probe.
+
+  adi,reference-div-factor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      If set the driver skips dynamic calculation and uses this default
+      value instead.
+
+  adi,reference-doubler-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables reference doubler.
+
+  adi,reference-div2-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables reference divider.
+
+  adi,phase-detector-polarity-positive-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables positive phase detector polarity. Default negative.
+
+  adi,lock-detect-precision-6ns-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables 6ns lock detect precision. Default = 10ns.
+
+  adi,lock-detect-function-integer-n-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables lock detect for integer-N mode. Default = factional-N mode.
+
+  adi,charge-pump-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Charge pump current in mA. Default = 2500mA.
+
+  adi,muxout-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 6
+    description: |
+      On chip multiplexer output selection.
+      Valid values for the multiplexer output are:
+      0: Three-State Output (default)
+      1: DVDD
+      2: DGND
+      3: R-Counter output
+      4: N-Divider output
+      5: Analog lock detect
+      6: Digital lock detect
+
+  adi,low-spur-mode-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables low spur mode. Default = Low noise mode.
+
+  adi,cycle-slip-reduction-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables cycle slip reduction.
+
+  adi,charge-cancellation-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enabled charge pump charge cancellation for integer-N modes.
+
+  adi,anti-backlash-3ns-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables 3ns antibacklash pulse width for integer-N modes.
+
+  adi,band-select-clock-mode-high-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables faster band selection logic.
+
+  adi,12bit-clk-divider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Clock divider value used when adi,12bit-clkdiv-mode != 0
+
+  adi,clk-divider-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description: |
+      Valid values for the clkdiv mode are:
+      0: Clock divider off (default)
+      1: Fast lock enable
+      2: Phase resync enable
+
+  adi,aux-output-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables auxiliary RF output.
+
+  adi,aux-output-fundamental-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Selects fundamental VCO output on the auxiliary RF output.
+      Default = Output of RF dividers.
+
+  adi,mute-till-lock-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enables Mute-Till-Lock-Detect function.
+
+  adi,output-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Output power selection.
+      Valid values for the power mode are:
+      0: -4dBm (default)
+      1: -1dBm
+      2: +2dBm
+      3: +5dBm
+
+  adi,aux-output-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Auxiliary output power selection.
+      Valid values for the power mode are:
+      0: -4dBm (default)
+      1: -1dBm
+      2: +2dBm
+      3: +5dBm
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pll@4 {
+            compatible = "adi,adf4351";
+            reg = <4>;
+            spi-max-frequency = <10000000>;
+            clocks = <&clk0_ad9523 9>;
+            clock-names = "clkin";
+            adi,channel-spacing = <10000>;
+            adi,power-up-frequency = <2400000000>;
+            adi,phase-detector-polarity-positive-enable;
+            adi,charge-pump-current = <2500>;
+            adi,output-power = <3>;
+            adi,mute-till-lock-enable;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
new file mode 100644
index 0000000000..aa6a3193b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4377.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADF4377 Microwave Wideband Synthesizer with Integrated VCO
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+
+description: |
+   The ADF4377 is a high performance, ultralow jitter, dual output integer-N
+   phased locked loop (PLL) with integrated voltage controlled oscillator (VCO)
+   ideally suited for data converter and mixed signal front end (MxFE) clock
+   applications.
+
+   https://www.analog.com/en/products/adf4377.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4377
+      - adi,adf4378
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      External clock that provides reference input frequency.
+    items:
+      - const: ref_in
+
+  chip-enable-gpios:
+    description:
+      GPIO that controls the Chip Enable Pin.
+    maxItems: 1
+
+  clk1-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 1 Output Buffer Pin.
+    maxItems: 1
+
+  clk2-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 2 Output Buffer Pin.
+    maxItems: 1
+
+  adi,muxout-select:
+    description:
+      On chip multiplexer output selection.
+      high_z - MUXOUT Pin set to high-Z.
+      lock_detect - MUXOUT Pin set to lock detector output.
+      muxout_low - MUXOUT Pin set to low.
+      f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2.
+      f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2.
+      muxout_high - MUXOUT Pin set to high.
+    enum: [high_z, lock_detect, muxout_low, f_div_rclk_2, f_div_nclk_2, muxout_high]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        frequency@0 {
+            compatible = "adi,adf4377";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            clocks = <&adf4377_ref_in>;
+            clock-names = "ref_in";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 0000000000..f2eb2287ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1013.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1013
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  vcm-supply:
+    description:
+      Analog voltage regulator.
+
+  vcc-drv-supply:
+    description:
+      RF Driver voltage regulator.
+
+  vcc2-drv-supply:
+    description:
+      RF predriver voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit voltage regulator.
+
+  vcc-amp1-supply:
+    description:
+      RF Amplifier 1 voltage regulator.
+
+  vcc-amp2-supply:
+    description:
+      RF Amplifier 2 voltage regulator.
+
+  vcc-env-supply:
+    description:
+      Envelope Detector voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Mixer Chip Band Gap Circuit voltage regulator.
+
+  vcc-bg2-supply:
+    description:
+      VGA Chip Band Gap Circuit voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruppler voltage regulator.
+
+  adi,detector-enable:
+    description:
+      Enable the Envelope Detector available at output pins VENV_P and
+      VENV_N. Disable to reduce power consumption.
+    type: boolean
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+  - vcc-drv-supply
+  - vcc2-drv-supply
+  - vcc-vva-supply
+  - vcc-amp1-supply
+  - vcc-amp2-supply
+  - vcc-env-supply
+  - vcc-bg-supply
+  - vcc-bg2-supply
+  - vcc-mixer-supply
+  - vcc-quad-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv1013@0{
+        compatible = "adi,admv1013";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1013_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-drv-supply = <&vcc_drv>;
+        vcc2-drv-supply = <&vcc2_drv>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-amp1-supply = <&vcc_amp1>;
+        vcc-amp2-supply = <&vcc_amp2>;
+        vcc-env-supply = <&vcc_env>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-bg2-supply = <&vcc_bg2>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        vcc-quad-supply = <&vcc_quad>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
new file mode 100644
index 0000000000..39cc63a117
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1014 Microwave Downconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave downconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1014.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1014
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+    description:
+      External clock that provides the Local Oscillator input.
+
+  vcm-supply:
+    description:
+      Common-mode voltage regulator.
+
+  vcc-if-bb-supply:
+    description:
+      BB and IF supply voltage regulator.
+
+  vcc-vga-supply:
+    description:
+      RF Amplifier supply voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit supply voltage regulator.
+
+  vcc-lna-3p3-supply:
+    description:
+      Low Noise Amplifier 3.3V supply voltage regulator.
+
+  vcc-lna-1p5-supply:
+    description:
+      Low Noise Amplifier 1.5V supply voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Band Gap Circuit supply voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruple supply voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer supply voltage regulator.
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,detector-enable:
+    description:
+      Digital Rx Detector Enable. The Square Law Detector output is
+      available at output pin VDET.
+    type: boolean
+
+  adi,p1db-compensation-enable:
+    description:
+      Turn on bits to optimize P1dB.
+    type: boolean
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+  - vcc-if-bb-supply
+  - vcc-vga-supply
+  - vcc-vva-supply
+  - vcc-lna-3p3-supply
+  - vcc-lna-1p5-supply
+  - vcc-bg-supply
+  - vcc-quad-supply
+  - vcc-mixer-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      converter@0 {
+        compatible = "adi,admv1014";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1014_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-if-bb-supply = <&vcc_if_bb>;
+        vcc-vga-supply = <&vcc_vga>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
+        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-quad-supply = <&vcc_quad>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+        adi,p1db-compensation-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
new file mode 100644
index 0000000000..64f2352aac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv4420.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV4420 K Band Downconverter
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description:
+  The ADMV4420 is a highly integrated, double balanced, active
+  mixer with an integrated fractional-N synthesizer, ideally suited
+  for next generation K band satellite communications
+
+properties:
+  compatible:
+    enum:
+      - adi,admv4420
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  adi,lo-freq-khz:
+    description: LO Frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  adi,ref-ext-single-ended-en:
+    description: External reference selected.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mixer@0 {
+        compatible = "adi,admv4420";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        adi,lo-freq-khz = <16750000>;
+        adi,ref-ext-single-ended-en;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
new file mode 100644
index 0000000000..f11391ab4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADRF6780 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
+
+   https://www.analog.com/en/products/adrf6780.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adrf6780
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  clock-output-names:
+    maxItems: 1
+
+  adi,vga-buff-en:
+    description:
+      RF Variable Gain Amplifier Buffer Enable. Gain is controlled by
+      the voltage on the VATT pin.
+    type: boolean
+
+  adi,lo-buff-en:
+    description:
+      Local Oscillator Amplifier Enable. Disable to put the part in
+      a power down state.
+    type: boolean
+
+  adi,if-mode-en:
+    description:
+      Intermediate Frequency Mode Enable. Either IF Mode or I/Q Mode
+      can be enabled at a time.
+    type: boolean
+
+  adi,iq-mode-en:
+    description:
+      I/Q Mode Enable. Either IF Mode or I/Q Mode can be enabled at a
+      time.
+    type: boolean
+
+  adi,lo-x2-en:
+    description:
+      Double the Local Oscillator output frequency from the Local
+      Oscillator Input Frequency. Either LOx1 or LOx2 can be enabled
+      at a time.
+    type: boolean
+
+  adi,lo-ppf-en:
+    description:
+      Local Oscillator input frequency equal to the Local Oscillator
+      output frequency (LO x1). Either LOx1 or LOx2 can be enabled
+      at a time.
+    type: boolean
+
+  adi,lo-en:
+    description:
+      Enable additional cirtuitry in the LO chain. Disable to put the
+      part in a power down state.
+    type: boolean
+
+  adi,uc-bias-en:
+    description:
+      Enable all bias circuitry thourghout the entire part.
+      Disable to put the part in a power down state.
+    type: boolean
+
+  adi,lo-sideband:
+    description:
+      Switch to the Lower LO Sideband. By default the Upper LO
+      sideband is enabled.
+    type: boolean
+
+  adi,vdet-out-en:
+    description:
+      VDET Output Select Enable. Expose the RF detector output to the
+      VDET external pin.
+    type: boolean
+
+  '#clock-cells':
+    const: 0
+
+dependencies:
+  adi,lo-x2-en: [ "adi,lo-en" ]
+  adi,lo-ppf-en: [ "adi,lo-en" ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adrf6780@0 {
+        compatible = "adi,adrf6780";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&adrf6780_lo>;
+        clock-names = "lo_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
new file mode 100644
index 0000000000..3d94dd4612
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/adi,adxrs290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope
+
+maintainers:
+  - Nishant Malpani <nish.malpani25@gmail.com>
+
+description: |
+  Bindings for the Analog Devices ADXRS290 dual-axis MEMS gyroscope device.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADXRS290.pdf
+
+properties:
+  compatible:
+    const: adi,adxrs290
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyro@0 {
+            compatible = "adi,adxrs290";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
new file mode 100644
index 0000000000..1414ba9977
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/bosch,bmg160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMG160 triaxial rotation sensor (gyroscope)
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmg160
+      - bosch,bmi055_gyro
+      - bosch,bmi088_gyro
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description:
+      Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyroscope@69 {
+            compatible = "bosch,bmg160";
+            reg = <0x69>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
new file mode 100644
index 0000000000..d1a6103fc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/invensense,mpu3050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense MPU-3050 Gyroscope
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: invensense,mpu3050
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vlogic-supply: true
+
+  interrupts:
+    minItems: 1
+    description:
+      Interrupt mapping for the trigger interrupt from the internal oscillator.
+
+  mount-matrix: true
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description: |
+      The MPU-3050 will pass through and forward the I2C signals from the
+      incoming I2C bus, alternatively drive traffic to a slave device (usually
+      an accelerometer) on its own initiative. Therefore is supports an
+      i2c-gate subnode.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyroscope@68 {
+            compatible = "invensense,mpu3050";
+            reg = <0x68>;
+            interrupt-parent = <&foo>;
+            interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&bar>;
+            vlogic-supply = <&baz>;
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                magnetometer@c {
+                    compatible = "asahi-kasei,ak8975";
+                    reg = <0x0c>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
new file mode 100644
index 0000000000..297d519d68
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FXAS21002C Gyroscope
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+  3 axis digital gyroscope device with an I2C and SPI interface.
+  http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C
+
+properties:
+  compatible:
+    const: nxp,fxas21002c
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to reset
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: Either interrupt may be triggered on rising or falling edges.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description: the interrupt/data ready line will be configured as open drain,
+                 which is useful if several sensors share the same interrupt
+                 line.
+
+  spi-max-frequency:
+    maximum: 2000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gyroscope@20 {
+            compatible = "nxp,fxas21002c";
+            reg = <0x20>;
+
+            vdd-supply = <&reg_peri_3p15v>;
+            vddio-supply = <&reg_peri_3p15v>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gyroscope@0 {
+            compatible = "nxp,fxas21002c";
+            reg = <0x0>;
+
+            spi-max-frequency = <2000000>;
+
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
new file mode 100644
index 0000000000..967778fb0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30100 heart rate and pulse oximeter sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+properties:
+  compatible:
+    const: maxim,max30100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,led-current-microamp:
+    minItems: 2
+    maxItems: 2
+    description: |
+      LED current whilst the engine is running. First indexed value is
+      the configuration for the RED LED, and second value is for the IR LED.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30100";
+            reg = <0x57>;
+            maxim,led-current-microamp = <24000 50000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
new file mode 100644
index 0000000000..c13c10c8d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max30102
+      - maxim,max30105
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  maxim,red-led-current-microamp:
+    description: RED LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,ir-led-current-microamp:
+    description: IR LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+  maxim,green-led-current-microamp:
+    description: Green LED current. Each step is approximately 200 microamps.
+    minimum: 0
+    maximum: 50800
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max30100
+    then:
+      properties:
+        maxim,green-led-current-microamp: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-rate@57 {
+            compatible = "maxim,max30102";
+            reg = <0x57>;
+            maxim,red-led-current-microamp = <7000>;
+            maxim,ir-led-current-microamp = <7000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
new file mode 100644
index 0000000000..5b6cde86b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/ti,afe4403.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AFE4403 Heart rate and Pulse Oximeter
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,afe4403
+
+  reg:
+    maxItems: 1
+
+  tx-supply:
+    description: Supply to transmitting LEDs.
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-mon@0 {
+            compatible = "ti,afe4403";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            tx-supply = <&vbat>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
new file mode 100644
index 0000000000..167d10bd60
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/health/ti,afe4404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: ti,afe4404
+
+  reg:
+    maxItems: 1
+
+  tx-supply:
+    description: Supply to transmitting LEDs.
+
+  interrupts:
+    maxItems: 1
+    description: Connected to ADC_RDY pin.
+
+  reset-gpios:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        heart-mon@58 {
+            compatible = "ti,afe4404";
+            reg = <0x58>;
+            tx-supply = <&vbat>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
new file mode 100644
index 0000000000..0103f42389
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/dht11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DHT11 humidity + temperature sensor
+
+maintainers:
+  - Harald Geyer <harald@ccbib.org>
+
+description: |
+   A simple and low cost module providing a non standard single GPIO based
+   interface.  It is believed the part is made by aosong but don't have
+   absolute confirmation of this, or what the aosong part number is.
+
+properties:
+  compatible:
+    const: dht11
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+    description:
+      Single, interrupt capable, GPIO used to communicate with the device.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    humidity-sensor {
+        compatible = "dht11";
+        gpios = <&gpio0 6 0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml b/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
new file mode 100644
index 0000000000..598473df74
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/st,hts221.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTS221 STM humidity + temperature sensor
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description: |
+   Humidity and temperature sensor with I2C interface and data ready
+   interrupt.
+
+properties:
+  compatible:
+    const: st,hts221
+
+  reg:
+    maxItems: 1
+
+  drive-open-drain:
+    type: boolean
+    description:
+      The interrupt/data ready line will be configured as open drain, which
+      is useful if several sensors share the same interrupt line.
+
+  vdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hts221@5f {
+            compatible = "st,hts221";
+            reg = <0x5f>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
new file mode 100644
index 0000000000..79e75a8675
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC2010/HDC2080 humidity and temperature iio sensors
+
+maintainers:
+  - Eugene Zaikonnikov <ez@norophonic.com>
+
+description: |
+  Relative humidity and temperature sensors on I2C bus
+
+  Datasheets are available at:
+    http://www.ti.com/product/HDC2010/datasheet
+    http://www.ti.com/product/HDC2080/datasheet
+
+properties:
+  compatible:
+    enum:
+      - ti,hdc2010
+      - ti,hdc2080
+
+  vdd-supply: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@40 {
+            compatible = "ti,hdc2010";
+            reg = <0x40>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/impedance-analyzer/adi,ad5933.yaml b/Documentation/devicetree/bindings/iio/impedance-analyzer/adi,ad5933.yaml
new file mode 100644
index 0000000000..2ad043554b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/impedance-analyzer/adi,ad5933.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/impedance-analyzer/adi,ad5933.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt1@gmail.com>
+  - Gabriel Capella <gabriel@capella.pro>
+
+description: |
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5933
+      - adi,ad5934
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      The regulator supply for DVDD, AVDD1 and AVDD2 when they
+      are connected together.  Used to calculate voltage scaling of measurement
+      channels.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        impedance-analyzer@d {
+            compatible = "adi,ad5933";
+            reg = <0x0d>;
+            vdd-supply = <&vdd_supply>;
+            clocks = <&ref_clk>;
+            clock-names = "mclk";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
new file mode 100644
index 0000000000..4e43c80e51
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16460 and similar IMUs
+
+maintainers:
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+
+description: |
+  Analog Devices ADIS16460 and similar IMUs
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16460.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16460
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "adi,adis16460";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
new file mode 100644
index 0000000000..c73533c545
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16475.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16475 and similar IMUs
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices ADIS16475 and similar IMUs
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16475.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16475-1
+      - adi,adis16475-2
+      - adi,adis16475-3
+      - adi,adis16477-1
+      - adi,adis16477-2
+      - adi,adis16477-3
+      - adi,adis16470
+      - adi,adis16465-1
+      - adi,adis16465-2
+      - adi,adis16465-3
+      - adi,adis16467-1
+      - adi,adis16467-2
+      - adi,adis16467-3
+      - adi,adis16500
+      - adi,adis16505-1
+      - adi,adis16505-2
+      - adi,adis16505-3
+      - adi,adis16507-1
+      - adi,adis16507-2
+      - adi,adis16507-3
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. If specified,
+      it will be asserted during driver probe. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,sync-mode:
+    description:
+      Configures the device SYNC pin. The following modes are supported
+      0 - output_sync
+      1 - direct_sync
+      2 - scaled_sync
+      3 - pulse_sync
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adis16500
+              - adi,adis16505-1
+              - adi,adis16505-2
+              - adi,adis16505-3
+              - adi,adis16507-1
+              - adi,adis16507-2
+              - adi,adis16507-3
+
+    then:
+      properties:
+        adi,sync-mode:
+          minimum: 0
+          maximum: 2
+
+  - if:
+      properties:
+        adi,sync-mode:
+          enum: [1, 2, 3]
+
+    then:
+      dependencies:
+        adi,sync-mode: [ clocks ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adis16475: adis16475-3@0 {
+            compatible = "adi,adis16475-3";
+            reg = <0>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <2000000>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
new file mode 100644
index 0000000000..56e0dc20f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16480.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16480 and similar IMUs
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16375
+      - adi,adis16480
+      - adi,adis16485
+      - adi,adis16488
+      - adi,adis16490
+      - adi,adis16495-1
+      - adi,adis16495-2
+      - adi,adis16495-3
+      - adi,adis16497-1
+      - adi,adis16497-2
+      - adi,adis16497-3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Accepted interrupt types are:
+      * IRQ_TYPE_EDGE_RISING
+      * IRQ_TYPE_EDGE_FALLING
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    description:
+      Default if not supplied is DIO1.
+    items:
+      enum:
+        - DIO1
+        - DIO2
+        - DIO3
+        - DIO4
+
+  spi-cpha: true
+  spi-cpol: true
+
+  reset-gpios:
+    maxItems: 1
+    description: Connected to RESET pin which is active low.
+
+  clocks:
+    maxItems: 1
+    description: If not provided, then the internal clock is used.
+
+  clock-names:
+    description: |
+      sync: In sync mode, the internal clock is disabled and the frequency
+            of the external clock signal establishes therate of data
+            collection and processing. See Fig 14 and 15 in the datasheet.
+            The clock-frequency must be:
+            * 3000 to 4500 Hz for adis1649x devices.
+            * 700 to 2400 Hz for adis1648x devices.
+      pps:  In Pulse Per Second (PPS) Mode, the rate of data collection and
+            production is equal to the product of the external clock
+            frequency and the scale factor in the SYNC_SCALE register, see
+            Table 154 in the datasheet.
+            The clock-frequency must be:
+            * 1 to 128 Hz for adis1649x devices.
+            * This mode is not supported by adis1648x devices.
+    enum:
+      - sync
+      - pps
+
+  adi,ext-clk-pin:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      The DIOx line to be used as an external clock input.
+      Each DIOx pin supports only one function at a time (data ready line
+      selection or external clock input). When a single pin has two
+      two assignments, the enable bit for the lower priority function
+      automatically resets to zero (disabling the lower priority function).
+      Data ready has highest priority.
+      If not provided then DIO2 is assigned as default external clock
+      input pin.
+    enum:
+      - DIO1
+      - DIO2
+      - DIO3
+      - DIO4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "adi,adis16495-1";
+            reg = <0>;
+            spi-max-frequency = <3200000>;
+            spi-cpol;
+            spi-cpha;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            interrupt-names = "DIO2";
+            clocks = <&adis16495_sync>;
+            clock-names = "sync";
+            adi,ext-clk-pin = "DIO1";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
new file mode 100644
index 0000000000..47cfba939c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI160
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope and externally
+  connectable Magnetometer
+  https://www.bosch-sensortec.com/bst/products/all_products/bmi160
+
+properties:
+  compatible:
+    const: bosch,bmi160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    enum:
+      - INT1
+      - INT2
+    description: |
+      set to "INT1" if INT1 pin should be used as interrupt input, set
+      to "INT2" if INT2 pin should be used instead
+
+  drive-open-drain:
+    description: |
+      set if the specified interrupt pin should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+  vddio-supply:
+    description: provide VDD IO power to the sensor.
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bmi160@68 {
+            compatible = "bosch,bmi160";
+            reg = <0x68>;
+            vdd-supply = <&pm8916_l17>;
+            vddio-supply = <&pm8916_l6>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+            mount-matrix = "0", "1", "0",
+                           "-1", "0", "0",
+                           "0", "0", "1";
+        };
+    };
+  - |
+    // Example for SPI
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bmi160@0 {
+            compatible = "bosch,bmi160";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 0000000000..e0d06db161
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+  - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+  internal MCU for sensor fusion
+  https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bno055
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      imu {
+        compatible = "bosch,bno055";
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      imu@28 {
+        compatible = "bosch,bno055";
+        reg = <0x28>;
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
new file mode 100644
index 0000000000..7cd05bcbee
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-426xx Inertial Measurement Unit
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+  accelerometer.
+
+  It has a configurable host interface that supports I3C, I2C and SPI serial
+  communication, features a 2kB FIFO and 2 programmable interrupts with
+  ultra-low-power wake-on-motion support to minimize system power consumption.
+
+  Other industry-leading features include InvenSense on-chip APEX Motion
+  Processing engine for gesture recognition, activity classification, and
+  pedometer, along with programmable digital filters, and an embedded
+  temperature sensor.
+
+  https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
+
+properties:
+  compatible:
+    enum:
+      - invensense,icm42600
+      - invensense,icm42602
+      - invensense,icm42605
+      - invensense,icm42622
+      - invensense,icm42631
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  drive-open-drain:
+    type: boolean
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        icm42605@68 {
+            compatible = "invensense,icm42605";
+            reg = <0x68>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        icm42602@0 {
+            compatible = "invensense,icm42602";
+            reg = <0>;
+            spi-max-frequency = <24000000>;
+            spi-cpha;
+            spi-cpol;
+            interrupt-parent = <&gpio1>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
new file mode 100644
index 0000000000..1db6952ddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,mpu6050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+
+description: |
+  These devices support both I2C and SPI bus interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - invensense,iam20680
+          - invensense,icm20608
+          - invensense,icm20609
+          - invensense,icm20689
+          - invensense,icm20602
+          - invensense,icm20690
+          - invensense,mpu6000
+          - invensense,mpu6050
+          - invensense,mpu6500
+          - invensense,mpu6515
+          - invensense,mpu6880
+          - invensense,mpu9150
+          - invensense,mpu9250
+          - invensense,mpu9255
+      - items:
+          - const: invensense,icm20600
+          - const: invensense,icm20602
+      - items:
+          - const: invensense,icm20608d
+          - const: invensense,icm20608
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  mount-matrix: true
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description: |
+      These devices also support an auxiliary i2c bus via an i2c-gate.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - invensense,mpu9150
+                - invensense,mpu9250
+                - invensense,mpu9255
+    then:
+      properties:
+        i2c-gate: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "invensense,mpu9250";
+            reg = <0x68>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+            mount-matrix = "-0.984807753012208",  /* x0 */
+                           "0",                   /* y0 */
+                           "-0.173648177666930",  /* z0 */
+                           "0",                   /* x1 */
+                           "-1",                  /* y1 */
+                           "0",                   /* z1 */
+                           "-0.173648177666930",  /* x2 */
+                           "0",                   /* y2 */
+                           "0.984807753012208";   /* z2 */
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                magnetometer@c {
+                    compatible = "asahi-kasei,ak8975";
+                    reg = <0x0c>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
new file mode 100644
index 0000000000..688100b240
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/nxp,fxos8700.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale FXOS8700 Inertial Measurement Unit
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Accelerometer and magnetometer combo device with an i2c and SPI interface.
+  https://www.nxp.com/products/sensors/motion-sensors/6-axis/digital-motion-sensor-3d-accelerometer-2g-4g-8g-plus-3d-magnetometer:FXOS8700CQ
+
+properties:
+  compatible:
+    enum:
+      - nxp,fxos8700
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fxos8700@1e {
+            compatible = "nxp,fxos8700";
+            reg = <0x1e>;
+
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fxos8700@0 {
+            compatible = "nxp,fxos8700";
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
new file mode 100644
index 0000000000..ee8724ad33
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/st,lsm6dsx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM 6-axis (acc + gyro) IMU Mems sensors
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  Devices have both I2C and SPI interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - st,lsm6ds3
+          - st,lsm6ds3h
+          - st,lsm6dsl
+          - st,lsm6dsm
+          - st,ism330dlc
+          - st,lsm6dso
+          - st,asm330lhh
+          - st,lsm6dsox
+          - st,lsm6dsr
+          - st,lsm6ds3tr-c
+          - st,ism330dhcx
+          - st,lsm9ds1-imu
+          - st,lsm6ds0
+          - st,lsm6dsrx
+          - st,lsm6dst
+          - st,lsm6dsop
+          - st,lsm6dsv
+          - st,lsm6dso16is
+      - items:
+          - const: st,asm330lhhx
+          - const: st,lsm6dsr
+      - items:
+          - const: st,lsm6dstx
+          - const: st,lsm6dst
+      - items:
+          - const: st,lsm6dsv16x
+          - const: st,lsm6dsv
+      - items:
+          - const: st,ism330is
+          - const: st,lsm6dso16is
+      - items:
+          - const: st,asm330lhb
+          - const: st,asm330lhh
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description:
+      Supports up to 2 interrupt lines via the INT1 and INT2 pins.
+
+  vdd-supply:
+    description: if defined provides VDD power to the sensor.
+
+  vddio-supply:
+    description: if defined provides VDD IO power to the sensor.
+
+  st,drdy-int-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The pin on the package that will be used to signal data ready
+    enum:
+      - 1
+      - 2
+
+  st,pullups:
+    type: boolean
+    description: enable/disable internal i2c controller pullup resistors.
+
+  st,disable-sensor-hub:
+    type: boolean
+    description:
+      Enable/disable internal i2c controller slave autoprobing at bootstrap.
+      Disable sensor-hub is useful if i2c controller clock/data lines are
+      connected through a pull-up with other chip lines (e.g. SDO/SA0).
+
+  drive-open-drain:
+    type: boolean
+    description:
+      The interrupt/data ready line will be configured as open drain, which
+      is useful if several sensors share the same interrupt line.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@6b {
+            compatible = "st,lsm6dsm";
+            reg = <0x6b>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
new file mode 100644
index 0000000000..d7d14f2f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/adux1020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADUX1020 Photometric sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Photometric sensor over an i2c interface.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adux1020
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adux1020@64 {
+                compatible = "adi,adux1020";
+                reg = <0x64>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
new file mode 100644
index 0000000000..0e8cd02759
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+
+maintainers:
+  - Christian Eggers <ceggers@arri.de>
+
+description: |
+  XYZ True Color Sensor with I2C Interface
+  https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+
+properties:
+  compatible:
+    enum:
+      - ams,as73211
+
+  reg:
+    description:
+      I2C address of the device (0x74...0x77).
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt specifier for the READY interrupt generated by the device.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        as73211@74 {
+            compatible = "ams,as73211";
+            reg = <0x74>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_color_sensor>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <19 IRQ_TYPE_EDGE_RISING>; /* READY */
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
new file mode 100644
index 0000000000..60e76bc035
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS TAOS TSL2563 ambient light sensor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2560
+      - amstaos,tsl2561
+      - amstaos,tsl2562
+      - amstaos,tsl2563
+
+  reg:
+    maxItems: 1
+
+  amstaos,cover-comp-gain:
+    description: Multiplier for gain compensation
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 16]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@29 {
+        compatible = "amstaos,tsl2563";
+        reg = <0x29>;
+        amstaos,cover-comp-gain = <16>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
new file mode 100644
index 0000000000..83b88c6a24
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/amstaos,tsl2591.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/amstaos,tsl2591.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS TSL2591 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Joe Sandom <joe.g.sandom@gmail.com>
+
+description: |
+  AMS/TAOS TSL2591 is a very-high sensitivity
+  light-to-digital converter that transforms light intensity into a digital
+  signal.
+
+properties:
+  compatible:
+    const: amstaos,tsl2591
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      Interrupt (INT:Pin 2) Active low. Should be set to IRQ_TYPE_EDGE_FALLING.
+      interrupt is used to detect if the light intensity has fallen below
+      or reached above the configured threshold values.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tsl2591@29 {
+            compatible = "amstaos,tsl2591";
+            reg = <0x29>;
+            interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
new file mode 100644
index 0000000000..206af44f2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Avago APDS9300 ambient light sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+
+properties:
+  compatible:
+    const: avago,apds9300
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "avago,apds9300";
+            reg = <0x39>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <29 8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
new file mode 100644
index 0000000000..f06e0fda56
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Datasheet at https://www.avagotech.com/docs/AV02-4191EN
+
+properties:
+  compatible:
+    const: avago,apds9960
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "avago,apds9960";
+            reg = <0x39>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
new file mode 100644
index 0000000000..1a88b3c253
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/bh1750.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BH1750 ambient light sensor
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Ambient light sensor with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - rohm,bh1710
+      - rohm,bh1715
+      - rohm,bh1721
+      - rohm,bh1750
+      - rohm,bh1751
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@23 {
+        compatible = "rohm,bh1750";
+        reg = <0x23>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml
new file mode 100644
index 0000000000..c63b79c335
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/capella,cm3605.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Capella Microsystems CM3605 Ambient Light and Short Distance Proximity Sensor
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Kevin Tsai <ktsai@capellamicro.com>
+
+description: |
+  The CM3605 is an entirely analog part. However, it requires quite a bit of
+  software logic to interface a host operating system.
+
+  This ALS and proximity sensor was one of the very first deployed in mobile
+  handsets, notably it is used in the very first Nexus One Android phone from
+  2010.
+
+properties:
+  compatible:
+    const: capella,cm3605
+
+  aset-gpios:
+    maxItems: 1
+    description:
+      ASET line (drive low to activate the ALS, should be flagged
+      GPIO_ACTIVE_LOW)
+
+  interrupts:
+    maxItems: 1
+    description:
+      Connected to the POUT (proximity sensor out) line. The edge
+      detection must be set to IRQ_TYPE_EDGE_BOTH so as to detect
+      movements toward and away from the proximity sensor.
+
+  io-channels:
+    maxItems: 1
+    description:
+      ADC channel used for converting the voltage from AOUT to a digital
+      representation.
+
+  io-channel-names:
+    const: aout
+
+  vdd-supply: true
+
+  capella,aset-resistance-ohms:
+    enum: [50000, 100000, 300000, 600000]
+    description: >
+      Sensitivity calibration resistance. Note that calibration curves
+      are only provided for specific allowed values. Default: 100 kOhms.
+
+required:
+  - compatible
+  - aset-gpios
+  - interrupts
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    light-sensor {
+        compatible = "capella,cm3605";
+        vdd-supply = <&foo_reg>;
+        aset-gpios = <&foo_gpio 1 GPIO_ACTIVE_LOW>;
+        capella,aset-resistance-ohms = <100000>;
+        interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
+        io-channels = <&adc 0x01>;
+        io-channel-names = "aout";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm36651.yaml b/Documentation/devicetree/bindings/iio/light/capella,cm36651.yaml
new file mode 100644
index 0000000000..446d94f3a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/capella,cm36651.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/capella,cm36651.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Capella CM36651 I2C Proximity and Color Light sensor
+
+maintainers:
+  - Beomho Seo <beomho.seo@samsung.com>
+
+properties:
+  compatible:
+    const: capella,cm36651
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vled-supply:
+    description: |
+      Supply for the IR_LED which is part of the cm36651 for proximity detection.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vled-supply
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@18 {
+            compatible = "capella,cm36651";
+            reg = <0x18>;
+            interrupt-parent = <&gpx0>;
+            interrupts = <2 0>;
+            vled-supply = <&ps_als_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
new file mode 100644
index 0000000000..a3a979553e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dyna-Image AL3010 sensor
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+properties:
+  compatible:
+    const: dynaimage,al3010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@1c {
+            compatible = "dynaimage,al3010";
+            reg = <0x1c>;
+            vdd-supply = <&vdd_reg>;
+            interrupts = <0 99 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
new file mode 100644
index 0000000000..8249be99cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/dynaimage,al3320a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dyna-Image AL3320A sensor
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+properties:
+  compatible:
+    const: dynaimage,al3320a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@1c {
+            compatible = "dynaimage,al3320a";
+            reg = <0x1c>;
+            vdd-supply = <&vdd_reg>;
+            interrupts = <0 99 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
new file mode 100644
index 0000000000..0ea278b07d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/isl29018.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Intersil 29018/29023/29035 Ambient Light, Infrared Light, and Proximity Sensor
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient and infrared light sensing with proximity detection over an i2c
+  interface.
+
+  https://www.renesas.com/us/en/www/doc/datasheet/isl29018.pdf
+  https://www.renesas.com/us/en/www/doc/datasheet/isl29023.pdf
+  https://www.renesas.com/us/en/www/doc/datasheet/isl29035.pdf
+
+properties:
+  compatible:
+    enum:
+      - isil,isl29018
+      - isil,isl29023
+      - isil,isl29035
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@44 {
+                compatible = "isil,isl29018";
+                reg = <0x44>;
+                interrupts-extended = <&msmgpio 61 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
new file mode 100644
index 0000000000..c8074f180a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr501.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteON LTR501 I2C Proximity and Light sensor
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr501
+      - liteon,ltr559
+      - liteon,ltr301
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  proximity-near-level: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@23 {
+            compatible = "liteon,ltr559";
+            reg = <0x23>;
+            proximity-near-level = <75>;
+
+            vdd-supply = <&pm8916_l17>;
+            vddio-supply = <&pm8916_l6>;
+
+            interrupt-parent = <&msmgpio>;
+            interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 0000000000..7de1b0e721
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+  - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    const: liteon,ltrf216a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltrf216a";
+            reg = <0x53>;
+            vdd-supply = <&vdd_regulator>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/maxim,max44009.yaml b/Documentation/devicetree/bindings/iio/light/maxim,max44009.yaml
new file mode 100644
index 0000000000..5911bd93bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/maxim,max44009.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/maxim,max44009.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX44009 Ambient Light Sensor
+
+maintainers:
+  - Robert Eshleman <bobbyeshleman@gmail.com>
+
+properties:
+  compatible:
+    const: maxim,max44009
+
+  reg:
+    maxItems: 1
+    description: Default address is 0x4a
+
+  interrupts:
+    maxItems: 1
+    description: Should be configured with type IRQ_TYPE_EDGE_FALLING
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@4a {
+            compatible = "maxim,max44009";
+            reg = <0x4a>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
new file mode 100644
index 0000000000..fe7bfe1adb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/noa1305.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NOA1305 Ambient Light Sensor
+
+maintainers:
+  - Martyn Welch <martyn.welch@collabora.com>
+
+description: |
+  Ambient sensing with an i2c interface.
+
+  https://www.onsemi.com/pub/Collateral/NOA1305-D.PDF
+
+properties:
+  compatible:
+    enum:
+      - onnn,noa1305
+
+  reg:
+    maxItems: 1
+
+  vin-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light@39 {
+                compatible = "onnn,noa1305";
+                reg = <0x39>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
new file mode 100644
index 0000000000..4f66fd47b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27008 color sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description:
+  The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
+  and IR) with four configurable channels. Red and green being always
+  available and two out of the rest three (blue, clear, IR) can be
+  selected to be simultaneously measured. Typical application is adjusting
+  LCD backlight of TVs, mobile phones and tablet PCs.
+
+properties:
+  compatible:
+    const: rohm,bu27008
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27008";
+        reg = <0x38>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
new file mode 100644
index 0000000000..bed42d5d0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27010 color sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear,
+  IR and flickering detection) with five configurable channels. Red, green
+  and flickering detection being always available and two out of the rest
+  three (blue, clear, IR) can be selected to be simultaneously measured.
+  Typical application is adjusting LCD/OLED backlight of TVs, mobile phones
+  and tablet PCs.
+
+properties:
+  compatible:
+    const: rohm,bu27010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27010";
+        reg = <0x38>;
+        vdd-supply = <&vdd>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml
new file mode 100644
index 0000000000..30a109a1bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27034 ambient light sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes
+  capable of detecting a very wide range of illuminance. Typical application
+  is adjusting LCD and backlight power of TVs and mobile phones.
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bu27034
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27034";
+        reg = <0x38>;
+        vdd-supply = <&vdd>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
new file mode 100644
index 0000000000..f8a932be0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Proximity and ambient light sensor with IR LED for the proximity
+  sensing and an analog output for light intensity. The ambient light
+  sensor output is not available on the GP2AP002S00F variant.
+
+properties:
+  compatible:
+    enum:
+      - sharp,gp2ap002a00f
+      - sharp,gp2ap002s00f
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: an interrupt for proximity, usually a GPIO line
+
+  vdd-supply:
+    description: VDD power supply a phandle to a regulator
+
+  vio-supply:
+    description: VIO power supply a phandle to a regulator
+
+  io-channels:
+    maxItems: 1
+    description: ALSOUT ADC channel to read the ambient light
+
+  io-channel-names:
+    const: alsout
+
+  sharp,proximity-far-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Hysteresis setting for "far" object detection, this setting is
+      device-unique and adjust the optical setting for proximity detection
+      of a "far away" object in front of the sensor.
+
+  sharp,proximity-close-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Hysteresis setting for "close" object detection, this setting is
+      device-unique and adjust the optical setting for proximity detection
+      of a "close" object in front of the sensor.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - sharp,proximity-far-hysteresis
+  - sharp,proximity-close-hysteresis
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@44 {
+        compatible = "sharp,gp2ap002a00f";
+        reg = <0x44>;
+        interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&vdd_regulator>;
+        vio-supply = <&vio_regulator>;
+        io-channels = <&adc_channel>;
+        io-channel-names = "alsout";
+        sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+        sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap020a00f.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap020a00f.yaml
new file mode 100644
index 0000000000..3fabf1f576
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap020a00f.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/sharp,gp2ap020a00f.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp GP2AP020A00F I2C Proximity/ALS sensor
+
+maintainers:
+  - Kyungmin Park <kyungmin.park@samsung.com>
+
+description: |
+  The proximity detector sensor requires power supply for its built-in led.
+
+properties:
+  compatible:
+    const: sharp,gp2ap020a00f
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vled-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vled-supply
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "sharp,gp2ap020a00f";
+            reg = <0x39>;
+            interrupts = <2 0>;
+            vled-supply = <&als_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml b/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml
new file mode 100644
index 0000000000..c86e5e1d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/st,uvis25.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/st,uvis25.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST UVIS25 uv sensor
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+
+properties:
+  compatible:
+    const: st,uvis25
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        uv-sensor@47 {
+            compatible = "st,uvis25";
+            reg = <0x47>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
new file mode 100644
index 0000000000..27c36ab799
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/st,vl6180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicro VL6180 ALS, range and proximity sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannanece23@gmail.com>
+  - Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+
+description: |
+  Proximity sensing module incorporating time of flight sensor
+  Datasheet at https://www.st.com/resource/en/datasheet/vl6180x.pdf
+
+properties:
+  compatible:
+    const: st,vl6180
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@29 {
+            compatible = "st,vl6180";
+            reg = <0x29>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
new file mode 100644
index 0000000000..f6e22dc981
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/stk33xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Sensortek STK33xx I2C Ambient Light and Proximity sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Ambient light and proximity sensor over an i2c interface.
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sensortek,stk3310
+      - sensortek,stk3311
+      - sensortek,stk3335
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  proximity-near-level: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        stk3310@48 {
+                compatible = "sensortek,stk3310";
+                reg = <0x48>;
+                proximity-near-level = <25>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
new file mode 100644
index 0000000000..441e9343fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt3001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT3001 Ambient Light Sensor
+
+maintainers:
+  - Andreas Dannenberg <dannenberg@ti.com>
+
+description: |
+  The device supports interrupt-driven and interrupt-less operation, depending
+  on whether an interrupt property has been populated into the DT.
+
+properties:
+  compatible:
+    const: ti,opt3001
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should be configured with type IRQ_TYPE_EDGE_FALLING
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@44 {
+            compatible = "ti,opt3001";
+            reg = <0x44>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
new file mode 100644
index 0000000000..12b0c7ed5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT4001 Ambient Light Sensor
+
+maintainers:
+  - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
+
+description:
+  Ambient light sensor with an i2c interface.
+  Last part of compatible is for the packaging used.
+  Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT.
+  https://www.ti.com/lit/gpn/opt4001
+
+properties:
+  compatible:
+    enum:
+      - ti,opt4001-picostar
+      - ti,opt4001-sot-5x3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,opt4001-sot-5x3
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@44 {
+            compatible = "ti,opt4001-sot-5x3";
+            reg = <0x44>;
+            vdd-supply = <&vdd_reg>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
new file mode 100644
index 0000000000..7b92ba8cbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2583.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS)
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2580
+      - amstaos,tsl2581
+      - amstaos,tsl2583
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@29 {
+                compatible = "amstaos,tsl2581";
+                reg = <0x29>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
new file mode 100644
index 0000000000..d812298579
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/tsl2772.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMS/TAOS Ambient Light Sensor (ALS) and Proximity Detector
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  Ambient light sensing and proximity detection with an i2c interface.
+  https://ams.com/documents/20143/36005/TSL2772_DS000181_2-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - amstaos,tsl2571
+      - amstaos,tsl2671
+      - amstaos,tmd2671
+      - amstaos,tsl2771
+      - amstaos,tmd2771
+      - amstaos,tsl2572
+      - amstaos,tsl2672
+      - amstaos,tmd2672
+      - amstaos,tsl2772
+      - amstaos,tmd2772
+      - avago,apds9930
+
+  reg:
+    maxItems: 1
+
+  amstaos,proximity-diodes:
+    description: Proximity diodes to enable
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 1
+
+  interrupts:
+    maxItems: 1
+
+  led-max-microamp:
+    description: Current for the proximity LED
+    enum:
+      - 13000
+      - 25000
+      - 50000
+      - 100000
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@39 {
+                compatible = "amstaos,tsl2772";
+                reg = <0x39>;
+                interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+                vdd-supply = <&pm8941_l17>;
+                vddio-supply = <&pm8941_lvs1>;
+                amstaos,proximity-diodes = <0>;
+                led-max-microamp = <100000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
new file mode 100644
index 0000000000..dd78abe0ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/upisemi,us5182.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UPISEMI us5182d I2C ALS and Proximity sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: upisemi,usd5182
+
+  reg:
+    maxItems: 1
+
+  upisemi,glass-coef:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      glass attenuation factor - compensation factor of resolution 1000
+      for material transmittance.
+    default: 1000
+
+  upisemi,dark-ths:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    minItems: 8
+    maxItems: 8
+    description:
+      16-bit thresholds (adc counts) corresponding to every scale.
+
+  upisemi,upper-dark-gain:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
+      applied when light > threshold.
+    default: 0
+
+  upisemi,lower-dark-gain:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      8-bit dark gain compensation factor(4 int and 4 fractional bits - Q4.4)
+      applied when light < threshold.
+    default: 0x16
+
+  upisemi,continuous:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This chip has two power modes: one-shot (chip takes one measurement and
+      then shuts itself down) and continuous (chip takes continuous
+      measurements). The one-shot mode is more power-friendly but the
+      continuous mode may be more reliable. If this property is specified
+      the continuous mode will be used instead of the default one-shot one for
+      raw reads.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@39 {
+            compatible = "upisemi,usd5182";
+            reg = <0x39>;
+            upisemi,glass-coef = < 1000 >;
+            upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
+            upisemi,upper-dark-gain = /bits/ 8 <0x00>;
+            upisemi,lower-dark-gain = /bits/ 8 <0x16>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
new file mode 100644
index 0000000000..fb19a2d7a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/veml6030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VEML6030 Ambient Light Sensor (ALS)
+
+maintainers:
+  - Rishi Gupta <gupt21@gmail.com>
+
+description: |
+  Bindings for the ambient light sensor veml6030 from Vishay
+  Semiconductors over an i2c interface.
+
+  Irrespective of whether interrupt is used or not, application
+  can get the ALS and White channel reading from IIO raw interface.
+
+  If the interrupts are used, application will receive an IIO event
+  whenever configured threshold is crossed.
+
+  Specifications about the sensor can be found at:
+    https://www.vishay.com/docs/84366/veml6030.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml6030
+
+  reg:
+    description:
+      I2C address of the device.
+    enum:
+      - 0x10 # ADDR pin pulled down
+      - 0x48 # ADDR pin pulled up
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
+      Refer to interrupt-controller/interrupts.txt for generic
+      interrupt client node bindings.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@10 {
+                compatible = "vishay,veml6030";
+                reg = <0x10>;
+                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
new file mode 100644
index 0000000000..4d1a225e88
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4000 ambient light and proximity sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  Ambient light sensing with proximity detection over an i2c
+  interface.
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl4000
+      - vishay,vcnl4010
+      - vishay,vcnl4020
+      - vishay,vcnl4040
+      - vishay,vcnl4200
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  proximity-near-level: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@51 {
+            compatible = "vishay,vcnl4200";
+            reg = <0x51>;
+            proximity-near-level = <220>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4035.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4035.yaml
new file mode 100644
index 0000000000..2c57ff05de
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4035.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,vcnl4035.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VISHAY VCNL4035 ambient Light and proximity sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet at https://www.vishay.com/docs/84251/vcnl4035x01.pdf
+
+properties:
+  compatible:
+    const: vishay,vcnl4035
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@60 {
+            compatible = "vishay,vcnl4035";
+            reg = <0x60>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
new file mode 100644
index 0000000000..cefb70def1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asahi Kasei AK8974 magnetometer sensor
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - alps,hscdtd008a
+      - asahi-kasei,ak8974
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Data ready (DRDY) and interrupt (INT1) lines from the chip. The DRDY
+      interrupt must be placed first. The interrupts can be triggered on
+      rising or falling edges.
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  mount-matrix: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@f {
+            compatible = "asahi-kasei,ak8974";
+            reg = <0x0f>;
+            avdd-supply = <&foo_reg>;
+            dvdd-supply = <&bar_reg>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>,
+                         <1 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
new file mode 100644
index 0000000000..9790f75fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8975.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AsahiKASEI AK8975 magnetometer sensor
+
+maintainers:
+  - Jonathan Albrieux <jonathan.albrieux@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - asahi-kasei,ak8975
+          - asahi-kasei,ak8963
+          - asahi-kasei,ak09911
+          - asahi-kasei,ak09912
+          - asahi-kasei,ak09916
+      - enum:
+          - ak8975
+          - ak8963
+          - ak09911
+          - ak09912
+          - ak09916
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+    description: |
+      AK8975 has a "Data ready" pin (DRDY) which informs that data
+      is ready to be read and is possible to listen on it. If used,
+      this should be active high. Prefer interrupt over this.
+
+  interrupts:
+    maxItems: 1
+    description: interrupt for DRDY pin. Triggered on rising edge.
+
+  vdd-supply:
+    description: |
+      an optional regulator that needs to be on to provide VDD power to
+      the sensor.
+
+  vid-supply:
+    description: |
+      an optional regulator that needs to be on to provide VID power to
+      the sensor.
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+      an optional pin needed for AK09911 to set the reset state. This should
+      be usually active low
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@c {
+            compatible = "asahi-kasei,ak8975";
+            reg = <0x0c>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&ldo_3v3_gnss>;
+            reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
+            mount-matrix = "-0.984807753012208",  /* x0 */
+                           "0",                   /* y0 */
+                           "-0.173648177666930",  /* z0 */
+                           "0",                   /* x1 */
+                           "-1",                  /* y1 */
+                           "0",                   /* z1 */
+                           "-0.173648177666930",  /* x2 */
+                           "0",                   /* y2 */
+                           "0.984807753012208";   /* z2 */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
new file mode 100644
index 0000000000..2867ab6bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/bosch,bmc150_magn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMC150 magnetometer sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Supports a range of parts, some of which form part of a multi die
+  package that also contains other sensors.  The interface is independent
+  however, so a separate driver is used to support the magnetometer part.
+  Datasheet at:
+  http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
+
+properties:
+  compatible:
+    description:
+      Note the bmm150_magn is a deprecated compatible as this part contains only
+      a magnetometer.
+    enum:
+      - bosch,bmc150_magn
+      - bosch,bmc156_magn
+      - bosch,bmm150
+      - bosch,bmm150_magn
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@12 {
+            compatible = "bosch,bmc150_magn";
+            reg = <0x12>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <0 1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
new file mode 100644
index 0000000000..6b54d32323
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/fsl,mag3110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MAG3110 magnetometer sensor
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,mag3110
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@e {
+            compatible = "fsl,mag3110";
+            reg = <0x0e>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/honeywell,hmc5843.yaml b/Documentation/devicetree/bindings/iio/magnetometer/honeywell,hmc5843.yaml
new file mode 100644
index 0000000000..5e778c9858
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/honeywell,hmc5843.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/honeywell,hmc5843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell HMC5843 magnetometer sensor
+
+maintainers:
+  - Neil Brown <neilb@suse.de>
+
+properties:
+  compatible:
+    enum:
+      - honeywell,hmc5843
+      - honeywell,hmc5883
+      - honeywell,hmc5883l
+      - honeywell,hmc5983
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@1e {
+            compatible = "honeywell,hmc5843";
+            reg = <0x1e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml
new file mode 100644
index 0000000000..a845cdd23e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/pni,rm3100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PNI RM3100 3-axis magnetometer sensor
+
+maintainers:
+  - Song Qiang <songqiang1304521@gmail.com>
+
+properties:
+  compatible:
+    const: pni,rm3100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@20 {
+            compatible = "pni,rm3100";
+            reg = <0x20>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
new file mode 100644
index 0000000000..121d540b7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
+
+maintainers:
+  - Gerald Loacker <gerald.loacker@wolfvision.net>
+
+description:
+  The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
+  integrates three independent Hall-effect sensors in the X, Y, and Z axes.
+  The device has an integrated temperature sensor available. The TMAG5273
+  can be configured through the I2C interface to enable any combination of
+  magnetic axes and temperature measurements. An integrated angle calculation
+  engine (CORDIC) provides full 360° angular position information for both
+  on-axis and off-axis angle measurement topologies. The angle calculation is
+  performed using two user-selected magnetic axes.
+
+properties:
+  compatible:
+    const: ti,tmag5273
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,angle-measurement:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Enables angle measurement in the selected plane.
+      If not specified, "x-y" will be anables as default.
+    enum:
+      - off
+      - x-y
+      - y-z
+      - x-z
+
+  vcc-supply:
+    description:
+      A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
+      typically 3.3 V.
+
+  interrupts:
+    description:
+      The low active interrupt can be configured to be fixed width or latched.
+      Interrupt events can be configured to be generated from magnetic
+      thresholds or when a conversion is completed.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@35 {
+            compatible = "ti,tmag5273";
+            reg = <0x35>;
+            #io-channel-cells = <1>;
+            ti,angle-measurement = "x-z";
+            vcc-supply = <&vcc3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
new file mode 100644
index 0000000000..877226e921
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Yamaha YAS530 family of magnetometer sensors
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers
+  first introduced by Yamaha in 2009 with the YAS530. They are successors
+  of Yamaha's first magnetometer YAS529. Over the years this magnetometer
+  has been miniaturized and appeared in a number of different variants.
+
+properties:
+  $nodename:
+    pattern: '^magnetometer@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - yamaha,yas530
+          - yamaha,yas532
+          - yamaha,yas533
+          - yamaha,yas535
+          - yamaha,yas536
+          - yamaha,yas537
+          - yamaha,yas539
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: The YAS530 sensor has a RSTN pin used to reset
+      the logic inside the sensor. This GPIO line should connect
+      to that pin and be marked as GPIO_ACTIVE_LOW.
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for INT pin for interrupt generation.
+      The polarity, whether the interrupt is active on the rising
+      or the falling edge, is software-configurable in the hardware.
+
+  vdd-supply:
+    description: An optional regulator providing core power supply
+      on the VDD pin, typically 1.8 V or 3.0 V.
+
+  iovdd-supply:
+    description: An optional regulator providing I/O power supply
+      for the I2C interface on the IOVDD pin, typically 1.8 V.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              const: yamaha,yas530
+    then:
+      properties:
+        reset-gpios: false
+
+  - if:
+      properties:
+        compatible:
+          items:
+            const: yamaha,yas539
+    then:
+      properties:
+        interrupts: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c-0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@2e {
+            compatible = "yamaha,yas530";
+            reg = <0x2e>;
+            vdd-supply = <&ldo1_reg>;
+            iovdd-supply = <&ldo2_reg>;
+            reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+            interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+
+    i2c-1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@2e {
+            compatible = "yamaha,yas539";
+            reg = <0x2e>;
+            vdd-supply = <&ldo1_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/mount-matrix.txt b/Documentation/devicetree/bindings/iio/mount-matrix.txt
new file mode 100644
index 0000000000..c3344ab509
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/mount-matrix.txt
@@ -0,0 +1,203 @@
+For discussion. Unclear are:
+* is the definition of +/- values practical or counterintuitive?
+* are the definitions unambiguous and easy to follow?
+* are the examples correct?
+* should we have HOWTO engineer a correct matrix for a new device (without comparing to a different one)?
+
+====
+
+
+Mounting matrix
+
+The mounting matrix is a device tree property used to orient any device
+that produce three-dimensional data in relation to the world where it is
+deployed.
+
+The purpose of the mounting matrix is to translate the sensor frame of
+reference into the device frame of reference using a translation matrix as
+defined in linear algebra.
+
+The typical usecase is that where a component has an internal representation
+of the (x,y,z) triplets, such as different registers to read these coordinates,
+and thus implying that the component should be mounted in a certain orientation
+relative to some specific device frame of reference.
+
+For example a device with some kind of screen, where the user is supposed to
+interact with the environment using an accelerometer, gyroscope or magnetometer
+mounted on the same chassis as this screen, will likely take the screen as
+reference to (x,y,z) orientation, with (x,y) corresponding to these axes on the
+screen and (z) being depth, the axis perpendicular to the screen.
+
+For a screen you probably want (x) coordinates to go from negative on the left
+to positive on the right, (y) from negative on the bottom to positive on top
+and (z) depth to be negative under the screen and positive in front of it,
+toward the face of the user.
+
+A sensor can be mounted in any angle along the axes relative to the frame of
+reference. This means that the sensor may be flipped upside-down, left-right,
+or tilted at any angle relative to the frame of reference.
+
+Another frame of reference is how the device with its sensor relates to the
+external world, the environment where the device is deployed. Usually the data
+from the sensor is used to figure out how the device is oriented with respect
+to this world. When using the mounting matrix, the sensor and device orientation
+becomes identical and we can focus on the data as it relates to the surrounding
+world.
+
+Device-to-world examples for some three-dimensional sensor types:
+
+- Accelerometers have their world frame of reference toward the center of
+  gravity, usually to the core of the planet. A reading of the (x,y,z) values
+  from the sensor will give a projection of the gravity vector through the
+  device relative to the center of the planet, i.e. relative to its surface at
+  this point. Up and down in the world relative to the device frame of
+  reference can thus be determined. and users would likely expect a value of
+  9.81 m/s^2 upwards along the (z) axis, i.e. out of the screen when the device
+  is held with its screen flat on the planets surface and 0 on the other axes,
+  as the gravity vector is projected 1:1 onto the sensors (z)-axis.
+
+  If you tilt the device, the g vector virtually coming out of the display
+  is projected onto the (x,y) plane of the display panel.
+
+  Example:
+
+         ^ z: +g                   ^ z: > 0
+         !                        /!
+         ! x=y=0                 / ! x: > 0
+     +--------+             +--------+
+     !        !             !        !
+     +--------+             +--------+
+         !                    /
+         !                   /
+         v                  v
+      center of         center of
+       gravity           gravity
+
+
+  If the device is tilted to the left, you get a positive x value. If you point
+  its top towards surface, you get a negative y axis.
+
+     (---------)
+     !         !           y: -g
+     !         !             ^
+     !         !             !
+     !         !
+     !         !  x: +g <- z: +g  -> x: -g
+     ! 1  2  3 !
+     ! 4  5  6 !             !
+     ! 7  8  9 !             v
+     ! *  0  # !           y: +g
+     (---------)
+
+
+- Magnetometers (compasses) have their world frame of reference relative to the
+  geomagnetic field. The system orientation vis-a-vis the world is defined with
+  respect to the local earth geomagnetic reference frame where (y) is in the
+  ground plane and positive towards magnetic North, (x) is in the ground plane,
+  perpendicular to the North axis and positive towards the East and (z) is
+  perpendicular to the ground plane and positive upwards.
+
+
+     ^^^ North: y > 0
+
+     (---------)
+     !         !
+     !         !
+     !         !
+     !         !  >
+     !         !  > North: x > 0
+     ! 1  2  3 !  >
+     ! 4  5  6 !
+     ! 7  8  9 !
+     ! *  0  # !
+     (---------)
+
+  Since the geomagnetic field is not uniform this definition fails if we come
+  closer to the poles.
+
+  Sensors and driver can not and should not take care of this because there
+  are complex calculations and empirical data to be taken care of. We leave
+  this up to user space.
+
+  The definition we take:
+
+  If the device is placed at the equator and the top is pointing north, the
+  display is readable by a person standing upright on the earth surface, this
+  defines a positive y value.
+
+
+- Gyroscopes detects the movement relative the device itself. The angular
+  velocity is defined as orthogonal to the plane of rotation, so if you put the
+  device on a flat surface and spin it around the z axis (such as rotating a
+  device with a screen lying flat on a table), you should get a negative value
+  along the (z) axis if rotated clockwise, and a positive value if rotated
+  counter-clockwise according to the right-hand rule.
+
+
+     (---------)     y > 0
+     !         !     v---\
+     !         !
+     !         !
+     !         !      <--\
+     !         !         ! z > 0
+     ! 1  2  3 !       --/
+     ! 4  5  6 !
+     ! 7  8  9 !
+     ! *  0  # !
+     (---------)
+
+
+So unless the sensor is ideally mounted, we need a means to indicate the
+relative orientation of any given sensor of this type with respect to the
+frame of reference.
+
+To achieve this, use the device tree property "mount-matrix" for the sensor.
+
+This supplies a 3x3 rotation matrix in the strict linear algebraic sense,
+to orient the senor axes relative to a desired point of reference. This means
+the resulting values from the sensor, after scaling to proper units, should be
+multiplied by this matrix to give the proper vectors values in three-dimensional
+space, relative to the device or world point of reference.
+
+For more information, consult:
+https://en.wikipedia.org/wiki/Rotation_matrix
+
+The mounting matrix has the layout:
+
+ (mxx, myx, mzx)
+ (mxy, myy, mzy)
+ (mxz, myz, mzz)
+
+Values are intended to be multiplied as:
+
+  x' = mxx * x + myx * y + mzx * z
+  y' = mxy * x + myy * y + mzy * z
+  z' = mxz * x + myz * y + mzz * z
+
+It is represented as an array of strings containing the real values for
+producing the transformation matrix.
+
+Examples:
+
+Identity matrix (nothing happens to the coordinates, which means the device was
+mechanically mounted in an ideal way and we need no transformation):
+
+mount-matrix = "1", "0", "0",
+               "0", "1", "0",
+               "0", "0", "1";
+
+The sensor is mounted 30 degrees (Pi/6 radians) tilted along the X axis, so we
+compensate by performing a -30 degrees rotation around the X axis:
+
+mount-matrix = "1", "0", "0",
+               "0", "0.866", "0.5",
+               "0", "-0.5", "0.866";
+
+The sensor is flipped 180 degrees (Pi radians) around the Z axis, i.e. mounted
+upside-down:
+
+mount-matrix = "0.998", "0.054", "0",
+               "-0.054", "0.998", "0",
+               "0", "0", "1";
+
+???: this does not match "180 degrees" - factors indicate ca. 3 degrees compensation
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
new file mode 100644
index 0000000000..c55831b60e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I/O channel multiplexer
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  If a multiplexer is used to select which hardware signal is fed to
+  e.g. an ADC channel, these bindings describe that situation.
+
+  For each non-empty string in the channels property, an io-channel will be
+  created. The number of this io-channel is the same as the index into the list
+  of strings in the channels property, and also matches the mux controller
+  state. The mux controller state is described in
+  Documentation/devicetree/bindings/mux/mux-controller.yaml
+
+properties:
+
+  compatible:
+    const: io-channel-mux
+
+  io-channels:
+    maxItems: 1
+    description: Channel node of the parent channel that has multiplexed input.
+
+  io-channel-names:
+    const: parent
+
+  mux-controls: true
+  mux-control-names: true
+
+  channels:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      List of strings, labeling the mux controller states. An empty
+      string for a state means that the channel is not available.
+
+  settle-time-us:
+    default: 0
+    description:
+      Time required for analog signals to settle after muxing.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - mux-controls
+  - channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+      compatible = "gpio-mux";
+      #mux-control-cells = <0>;
+
+      mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+                  <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+      compatible = "io-channel-mux";
+      io-channels = <&adc 0>;
+      io-channel-names = "parent";
+
+      mux-controls = <&mux>;
+      channels = "sync", "in", "system-regulator";
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
new file mode 100644
index 0000000000..b8d7083c97
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/adi,ad5272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5272 digital potentiometer
+
+maintainers:
+  - Phil Reid <preid@electromag.com.au>
+
+description: |
+  Datasheet: https://www.analog.com/en/products/ad5272.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5272-020
+      - adi,ad5272-050
+      - adi,ad5272-100
+      - adi,ad5274-020
+      - adi,ad5274-100
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Active low signal to the AD5272 RESET input.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        potentiometer@2f {
+            compatible = "adi,ad5272-020";
+            reg = <0x2f>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
new file mode 100644
index 0000000000..5082f919df
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/max5432.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/max5432.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5432-MAX5435 Digital Potentiometers
+
+maintainers:
+  - Martin Kaiser <martin@kaiser.cx>
+
+description: |
+  Maxim Integrated MAX5432-MAX5435 Digital Potentiometers connected via I2C
+
+  Datasheet:
+    https://datasheets.maximintegrated.com/en/ds/MAX5432-MAX5435.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5432
+      - maxim,max5433
+      - maxim,max5434
+      - maxim,max5435
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max5434@28 {
+        compatible = "maxim,max5434";
+        reg = <0x28>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
new file mode 100644
index 0000000000..87e88f2a99
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/microchip,mcp41010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
+
+maintainers:
+  - Chris Coffey <cmc@babblebit.net>
+
+description: |
+  Datasheet: https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp41010
+      - microchip,mcp41050
+      - microchip,mcp41100
+      - microchip,mcp42010
+      - microchip,mcp42050
+      - microchip,mcp42100
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        potentiometer@0 {
+            compatible = "microchip,mcp41010";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
new file mode 100644
index 0000000000..896fe0b5ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/microchip,mcp4131.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer
+
+maintainers:
+  - Slawomir Stepien <sst@poczta.fm>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4131-103
+      - microchip,mcp4131-104
+      - microchip,mcp4131-502
+      - microchip,mcp4131-503
+      - microchip,mcp4132-103
+      - microchip,mcp4132-104
+      - microchip,mcp4132-502
+      - microchip,mcp4132-503
+      - microchip,mcp4141-103
+      - microchip,mcp4141-104
+      - microchip,mcp4141-502
+      - microchip,mcp4141-503
+      - microchip,mcp4142-103
+      - microchip,mcp4142-104
+      - microchip,mcp4142-502
+      - microchip,mcp4142-503
+      - microchip,mcp4151-103
+      - microchip,mcp4151-104
+      - microchip,mcp4151-502
+      - microchip,mcp4151-503
+      - microchip,mcp4152-103
+      - microchip,mcp4152-104
+      - microchip,mcp4152-502
+      - microchip,mcp4152-503
+      - microchip,mcp4161-103
+      - microchip,mcp4161-104
+      - microchip,mcp4161-502
+      - microchip,mcp4161-503
+      - microchip,mcp4162-103
+      - microchip,mcp4162-104
+      - microchip,mcp4162-502
+      - microchip,mcp4162-503
+      - microchip,mcp4231-103
+      - microchip,mcp4231-104
+      - microchip,mcp4231-502
+      - microchip,mcp4231-503
+      - microchip,mcp4232-103
+      - microchip,mcp4232-104
+      - microchip,mcp4232-502
+      - microchip,mcp4232-503
+      - microchip,mcp4241-103
+      - microchip,mcp4241-104
+      - microchip,mcp4241-502
+      - microchip,mcp4241-503
+      - microchip,mcp4242-103
+      - microchip,mcp4242-104
+      - microchip,mcp4242-502
+      - microchip,mcp4242-503
+      - microchip,mcp4251-103
+      - microchip,mcp4251-104
+      - microchip,mcp4251-502
+      - microchip,mcp4251-503
+      - microchip,mcp4252-103
+      - microchip,mcp4252-104
+      - microchip,mcp4252-502
+      - microchip,mcp4252-503
+      - microchip,mcp4261-103
+      - microchip,mcp4261-104
+      - microchip,mcp4261-502
+      - microchip,mcp4261-503
+      - microchip,mcp4262-103
+      - microchip,mcp4262-104
+      - microchip,mcp4262-502
+      - microchip,mcp4262-503
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        potentiometer@0 {
+            compatible = "microchip,mcp4131-502";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml
new file mode 100644
index 0000000000..5c4b9b9181
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/microchip,mcp4531.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip mcp4531 and similar potentiometers.
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  Family of I2C digital potentiometer
+  Datasheets at:
+  * volatile https://ww1.microchip.com/downloads/en/DeviceDoc/22096b.pdf
+  * non-volatile https://ww1.microchip.com/downloads/en/DeviceDoc/22107B.pdf
+  Part numbers as follows: mcp4ABC-XXX where
+  A =   5 (1 wiper), 6 (2 wipers)
+  B =   3 (7-bit, volatile), 4 (7-bit, non-volatile),
+        5 (8-bit, volatile), 6 (8-bit, non-volatile),
+  C:    1 (potentiometer), 2 (rheostat)
+  XXX = 502 (5 kOhms), 103 (10 kOhms), 503 (50 kOhms), 104 (100 kOhms)
+
+properties:
+  compatible:
+    enum:
+        # Ordering reflects part number + range, so 502 < 103 etc
+      - microchip,mcp4531-502
+      - microchip,mcp4531-103
+      - microchip,mcp4531-503
+      - microchip,mcp4531-104
+      - microchip,mcp4532-502
+      - microchip,mcp4532-103
+      - microchip,mcp4532-503
+      - microchip,mcp4532-104
+      - microchip,mcp4541-502
+      - microchip,mcp4541-103
+      - microchip,mcp4541-503
+      - microchip,mcp4541-104
+      - microchip,mcp4542-502
+      - microchip,mcp4542-103
+      - microchip,mcp4542-503
+      - microchip,mcp4542-104
+      - microchip,mcp4551-502
+      - microchip,mcp4551-103
+      - microchip,mcp4551-503
+      - microchip,mcp4551-104
+      - microchip,mcp4552-502
+      - microchip,mcp4552-103
+      - microchip,mcp4552-503
+      - microchip,mcp4552-104
+      - microchip,mcp4561-502
+      - microchip,mcp4561-103
+      - microchip,mcp4561-503
+      - microchip,mcp4561-104
+      - microchip,mcp4562-502
+      - microchip,mcp4562-103
+      - microchip,mcp4562-503
+      - microchip,mcp4562-104
+      - microchip,mcp4631-502
+      - microchip,mcp4631-103
+      - microchip,mcp4631-503
+      - microchip,mcp4631-104
+      - microchip,mcp4632-502
+      - microchip,mcp4632-103
+      - microchip,mcp4632-503
+      - microchip,mcp4632-104
+      - microchip,mcp4641-502
+      - microchip,mcp4641-103
+      - microchip,mcp4641-503
+      - microchip,mcp4641-104
+      - microchip,mcp4642-502
+      - microchip,mcp4642-103
+      - microchip,mcp4642-503
+      - microchip,mcp4642-104
+      - microchip,mcp4651-502
+      - microchip,mcp4651-103
+      - microchip,mcp4651-503
+      - microchip,mcp4651-104
+      - microchip,mcp4652-502
+      - microchip,mcp4652-103
+      - microchip,mcp4652-503
+      - microchip,mcp4652-104
+      - microchip,mcp4661-502
+      - microchip,mcp4661-103
+      - microchip,mcp4661-503
+      - microchip,mcp4661-104
+      - microchip,mcp4662-502
+      - microchip,mcp4662-103
+      - microchip,mcp4662-503
+      - microchip,mcp4662-104
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dpot: dpot@28 {
+            compatible = "microchip,mcp4651-104";
+            reg = <0x28>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
new file mode 100644
index 0000000000..ab5c09c00f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas X9250 quad potentiometers
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Renesas X9250 integrates four digitally controlled potentiometers.
+  On each potentiometer, the X9250T has a 100 kOhms total resistance and the
+  X9250U has a 50 kOhms total resistance.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+properties:
+  compatible:
+    enum:
+      - renesas,x9250t
+      - renesas,x9250u
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Regulator for the VCC power supply.
+
+  avp-supply:
+    description:
+      Regulator for the analog V+ power supply.
+
+  avn-supply:
+    description:
+      Regulator for the analog V- power supply.
+
+  '#io-channel-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the write-protect pin.
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - avp-supply
+  - avn-supply
+  - '#io-channel-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        potentiometer@0 {
+            compatible = "renesas,x9250t";
+            reg = <0>;
+            vcc-supply = <&vcc_regulator>;
+            avp-supply = <&avp_regulator>;
+            avn-supply = <&avp_regulator>;
+            wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <2000000>;
+            #io-channel-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml b/Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml
new file mode 100644
index 0000000000..e4b5d890e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiostat/ti,lmp91000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP91000 series of potentiostats with I2C control
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  Typically used as a signal conditioner for chemical sensors.
+  LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+  LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lmp91000
+      - ti,lmp91002
+
+  reg:
+    maxItems: 1
+
+  io-channels:
+    maxItems: 1
+
+  ti,external-tia-resistor:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If the property ti,tia-gain-ohm is not defined this needs to be set to
+      signal that an external resistor value is being used.
+
+  ti,tia-gain-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2750, 3500, 7000, 14000, 35000, 120000, 350000]
+    description:
+      Internal resistor for the transimpedance amplifier.
+
+  ti,rload-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [10, 33, 50, 100]
+    description:
+      Internal resistor load applied to the gas sensor.
+      Default 100 Ohms.
+
+required:
+  - compatible
+  - reg
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        lmp91000@48 {
+            compatible = "ti,lmp91000";
+            reg = <0x48>;
+            ti,tia-gain-ohm = <7000>;
+            ti,rload-ohm = <100>;
+            io-channels = <&adc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
new file mode 100644
index 0000000000..9fb8d773ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: All Sensors DLH series low voltage digital pressure sensors
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the All Sensors DLH series pressure sensors.
+
+  Specifications about the sensors can be found at:
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+
+properties:
+  compatible:
+    enum:
+      - asc,dlhl60d
+      - asc,dlhl60g
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    description: interrupt mapping for EOC(data ready) pin
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@29 {
+            compatible = "asc,dlhl60d";
+            reg = <0x29>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <10 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
new file mode 100644
index 0000000000..6fda887ee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Pressure, temperature and humidity iio sensors with i2c and spi interfaces
+
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp180
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp280
+    https://www.bosch-sensortec.com/bst/products/all_products/bme280
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp380
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp580
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmp085
+      - bosch,bmp180
+      - bosch,bmp280
+      - bosch,bme280
+      - bosch,bmp380
+      - bosch,bmp580
+
+  reg:
+    maxItems: 1
+
+  vddd-supply:
+    description:
+      digital voltage regulator (see regulator/regulator.txt)
+
+  vdda-supply:
+    description:
+      analog voltage regulator (see regulator/regulator.txt)
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the sensor. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
+    maxItems: 1
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ (BMP085 only)
+    maxItems: 1
+
+required:
+  - compatible
+  - vddd-supply
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@77 {
+            compatible = "bosch,bmp085";
+            reg = <0x77>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+            vddd-supply = <&foo>;
+            vdda-supply = <&bar>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
new file mode 100644
index 0000000000..b31f8120f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell mprls0025pa pressure sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Honeywell pressure sensor of model mprls0025pa.
+
+  This sensor has an I2C and SPI interface. Only the I2C interface is
+  implemented.
+
+  There are many models with different pressure ranges available. The vendor
+  calls them "mpr series". All of them have the identical programming model and
+  differ in the pressure range, unit and transfer function.
+
+  To support different models one need to specify the pressure range as well as
+  the transfer function. Pressure range needs to be converted from its unit to
+  pascal.
+
+  The transfer function defines the ranges of numerical values delivered by the
+  sensor. The minimal range value stands for the minimum pressure and the
+  maximum value also for the maximum pressure with linear relation inside the
+  range.
+
+  Specifications about the devices can be found at:
+    https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+      products/sensors/pressure-sensors/board-mount-pressure-sensors/
+      micropressure-mpr-series/documents/
+      sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+
+properties:
+  compatible:
+    const: honeywell,mprls0025pa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Optional GPIO for resetting the device.
+      If not present the device is not reset during the probe.
+    maxItems: 1
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by the
+      sensor.
+      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+  - honeywell,pmin-pascal
+  - honeywell,pmax-pascal
+  - honeywell,transfer-function
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@18 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0x18>;
+            reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            honeywell,pmin-pascal = <0>;
+            honeywell,pmax-pascal = <172369>;
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
new file mode 100644
index 0000000000..69a3759e23
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HopeRF HP03 digital pressure/temperature sensors
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  Digital pressure and temperature sensor with an I2C interface.
+
+properties:
+  compatible:
+    const: hoperf,hp03
+
+  reg:
+    maxItems: 1
+
+  xclr-gpios:
+    description:
+      The XCLR pin is a reset of the ADC in the chip, it must be pulled
+      HI before the conversion and readout of the value from the ADC
+      registers and pulled LO afterward.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "hoperf,hp03";
+            reg = <0x77>;
+            xclr-gpios = <&portc 0 0x0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
new file mode 100644
index 0000000000..21e6ddb7f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/meas,ms5611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Measurement Specialities ms5611 and similar pressure sensors
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+properties:
+  compatible:
+    enum:
+      - meas,ms5607
+      - meas,ms5611
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  spi-max-frequency:
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@77 {
+            compatible = "meas,ms5607";
+            reg = <0x77>;
+            vdd-supply = <&ldo_3v3_gnss>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "meas,ms5611";
+            reg = <0>;
+            vdd-supply = <&ldo_3v3_gnss>;
+            spi-max-frequency = <20000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
new file mode 100644
index 0000000000..c33640ddde
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/murata,zpa2326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata ZPA2326 pressure sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Pressure sensor from Murata with SPI and I2C bus interfaces.
+
+
+properties:
+  compatible:
+    const: murata,zpa2326
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vref-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@5c {
+            compatible = "murata,zpa2326";
+            reg = <0x5c>;
+            interrupt-parent = <&gpio>;
+            interrupts = <12>;
+            vdd-supply = <&ldo_1v8_gnss>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "murata,zpa2326";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
new file mode 100644
index 0000000000..9567993ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/ams,as3935.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austrian Microsystems AS3935 Franklin lightning sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description:
+  This lightning distance sensor uses an I2C or SPI interface. The
+  binding currently only covers the SPI option.
+
+properties:
+  compatible:
+    const: ams,as3935
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  spi-cpha: true
+
+  interrupts:
+    maxItems: 1
+
+  ams,tuning-capacitor-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Calibration tuning capacitor stepping value. This will require using
+      the calibration data from the manufacturer.
+    minimum: 0
+    maximum: 120
+
+  ams,nflwdth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Set the noise and watchdog threshold register on startup. This will
+      need to set according to the noise from the MCU board, and possibly
+      the local environment. Refer to the datasheet for the threshold settings.
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lightning@0 {
+            compatible = "ams,as3935";
+            reg = <0>;
+            spi-max-frequency = <400000>;
+            spi-cpha;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 1>;
+            ams,tuning-capacitor-pf = <80>;
+            ams,nflwdth = <0x44>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
new file mode 100644
index 0000000000..ce79527983
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/devantech-srf04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devantech SRF04 and Maxbotix mb1000 ultrasonic range finder
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using two GPIOs:
+  - trigger-gpio is raised by the driver to start sending out an ultrasonic
+    burst
+  - echo-gpio is held high by the sensor after sending ultrasonic burst
+    until it is received once again
+
+  Specifications about the devices can be found at:
+  https://www.robot-electronics.co.uk/htm/srf04tech.htm
+
+  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - devantech,srf04
+      - maxbotix,mb1000
+      - maxbotix,mb1010
+      - maxbotix,mb1020
+      - maxbotix,mb1030
+      - maxbotix,mb1040
+
+  trig-gpios:
+    description:
+      Definition of the GPIO for the triggering (output)
+      This GPIO is set for about 10 us by the driver to tell the device it
+      should initiate the measurement cycle.
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+  echo-gpios:
+    description:
+      Definition of the GPIO for the echo (input)
+      This GPIO is set by the device as soon as an ultrasonic burst is sent
+      out and reset when the first echo is received.
+      Thus this GPIO is set while the ultrasonic waves are doing one round
+      trip.
+      It needs to be an GPIO which is able to deliver an interrupt because
+      the time between two interrupts is measured in the driver.
+    maxItems: 1
+
+  power-gpios:
+    description:
+      Definition of the GPIO for power management of connected peripheral
+      (output).
+      This GPIO can be used by the external hardware for power management.
+      When the device gets suspended it's switched off and when it resumes
+      it's switched on again. After some period of inactivity the driver
+      get suspended automatically (autosuspend feature).
+    maxItems: 1
+
+  startup-time-ms:
+    description:
+      This is the startup time the device needs after a resume to be up and
+      running.
+    minimum: 0
+    maximum: 1000
+    default: 100
+
+required:
+  - compatible
+  - trig-gpios
+  - echo-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    proximity {
+        compatible = "devantech,srf04";
+        trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+        echo-gpios = <&gpio2  6 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
new file mode 100644
index 0000000000..d4e09d2dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC MKBP Proximity Sensor
+
+maintainers:
+  - Stephen Boyd <swboyd@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  Google's ChromeOS EC sometimes has the ability to detect user proximity.
+  This is implemented on the EC as near/far logic and exposed to the OS
+  via an MKBP switch bit.
+
+properties:
+  compatible:
+    const: google,cros-ec-mkbp-proximity
+
+  label:
+    description: Name for proximity sensor
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    proximity {
+      compatible = "google,cros-ec-mkbp-proximity";
+      label = "proximity-wifi-lte";
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
new file mode 100644
index 0000000000..3eac248f29
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/maxbotix,mb1232.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MaxBotix I2CXL-MaxSonar ultrasonic distance sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type  mb1202,
+  mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface
+  for ranging
+
+  Specifications about the devices can be found at:
+  https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxbotix,mb1202
+      - maxbotix,mb1212
+      - maxbotix,mb1222
+      - maxbotix,mb1232
+      - maxbotix,mb1242
+      - maxbotix,mb7040
+      - maxbotix,mb7137
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt used to announce the preceding reading request has finished
+      and that data is available.  If no interrupt is specified the device
+      driver falls back to wait a fixed amount of time until data can be
+      retrieved.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@70 {
+        compatible = "maxbotix,mb1232";
+        reg = <0x70>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
new file mode 100644
index 0000000000..67f5389ece
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata IRS-D200 PIR sensor
+
+maintainers:
+  - Waqar Hameed <waqar.hameed@axis.com>
+
+description:
+  PIR sensor for human detection.
+
+properties:
+  compatible:
+    const: murata,irsd200
+
+  reg:
+    items:
+      - enum:
+          - 0x48
+          - 0x49
+        description: |
+          When the AD pin is connected to GND, the slave address is 0x48.
+          When the AD pin is connected to VDD, the slave address is 0x49.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Type should be IRQ_TYPE_EDGE_RISING.
+
+  vdd-supply:
+    description:
+      3.3 V supply voltage.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@48 {
+            compatible = "murata,irsd200";
+            reg = <0x48>;
+            interrupts = <24 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&regulator_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
new file mode 100644
index 0000000000..ada55f186f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallax PING))) and LaserPING range finder
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using one GPIO:
+  - ping-gpios is raised by the driver to start measurement
+  - direction of ping-gpio is then switched into input with an interrupt
+    for receiving distance value as PWM signal
+
+  Specifications about the devices can be found at:
+  http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
+  http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
+
+properties:
+  compatible:
+    enum:
+      - parallax,ping
+      - parallax,laserping
+
+  ping-gpios:
+    description:
+      Definition of the GPIO for the triggering and echo (output and input)
+      This GPIO is set for about 5 us by the driver to tell the device it
+      should initiate the measurement cycle. Afterwards the GPIO is switched
+      to input direction with an interrupt. The device sets it and the
+      length of the input signal corresponds to the measured distance.
+      It needs to be an GPIO which is able to deliver an interrupt because
+      the time between two interrupts is measured in the driver.
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+required:
+  - compatible
+  - ping-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    proximity {
+        compatible = "parallax,laserping";
+        ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
new file mode 100644
index 0000000000..775555d147
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9310 capacitive proximity sensor
+
+maintainers:
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9310/SX9311 capacitive proximity/button solution.
+
+  Specifications about the devices can be found at:
+  https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
+
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx9310
+      - semtech,sx9311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      The sole interrupt generated by the device used to announce the
+      preceding reading request has finished and that data is
+      available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,cs0-ground:
+    description: Indicates the CS0 sensor is connected to ground.
+    type: boolean
+
+  semtech,combined-sensors:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      List of which sensors are combined and represented by CS3.
+      Possible values are -
+      3        - CS3 (internal)
+      0 1      - CS0 + CS1
+      1 2      - CS1 + CS2 (default)
+      0 1 2 3  - CS0 + CS1 + CS2 + CS3
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 1
+    maxItems: 4
+
+  semtech,resolution:
+    description:
+      Capacitance measure resolution. Refer to datasheet for more details.
+    enum:
+      - coarsest
+      - very-coarse
+      - coarse
+      - medium-coarse
+      - medium
+      - fine
+      - very-fine
+      - finest
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Sensor used for start-up proximity detection. The combined
+      sensor is represented by the value 3. This is used for initial
+      compensation.
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 2, 4, 8]
+    default: 2
+    description:
+      PROXRAW filter strength. A value of 0 represents off, and other values
+      represent 1-1/N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description:
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9310";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,cs0-ground;
+        semtech,combined-sensors = <1 2 3>;
+        semtech,resolution = "fine";
+        semtech,startup-sensor = <1>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 0000000000..48f2214631
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9324.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
+properties:
+  compatible:
+    const: semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of 3 entries. Index represent the id of the CS pin.
+      Value indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 1.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph2-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 2.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph3-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 3.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+
+  semtech,ph01-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 128
+
+  semtech,ph23-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 128
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,ph01-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,ph23-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      Same as proxraw-strength01, for phase 2 and 3.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,cs-idle-sleep:
+    description:
+      State of CS pins during sleep mode and idle time.
+    enum:
+      - hi-z
+      - gnd
+      - vdd
+
+  semtech,int-comp-resistor:
+    description:
+      Internal resistor setting for compensation.
+    enum:
+      - lowest
+      - low
+      - high
+      - highest
+
+  semtech,input-precharge-resistor-ohms:
+    default: 4000
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+  semtech,input-analog-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: |
+      Defines the input antenna analog gain
+      0: x1.247
+      1: x1 (default)
+      2: x0.768
+      3: x0.552
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9324";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1 2 3>;
+        semtech,ph1-pin = <3 2 1>;
+        semtech,ph2-pin = <1 2 3>;
+        semtech,ph3-pin = <3 2 1>;
+        semtech,ph01-resolution = <256>;
+        semtech,ph23-resolution = <256>;
+        semtech,startup-sensor = <1>;
+        semtech,ph01-proxraw-strength = <2>;
+        semtech,ph23-proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,int-comp-resistor = "lowest";
+        semtech,input-precharge-resistor-ohms = <2000>;
+        semtech,cs-idle-sleep = "gnd";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 0000000000..ad0bb44f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,input-precharge-resistor-ohms:
+    default: 0
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,input-precharge-resistor-ohms = <4000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml
new file mode 100644
index 0000000000..66dd015068
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9500 capacitive proximity button device
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: semtech,sx9500
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO connected to the active low reset pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@28 {
+            compatible = "semtech,sx9500";
+            reg = <0x28>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
new file mode 100644
index 0000000000..322befc41d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/st,vl53l0x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST VL53L0X ToF ranging sensor
+
+maintainers:
+  - Song Qiang <songqiang1304521@gmail.com>
+
+properties:
+  compatible:
+    const: st,vl53l0x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@29 {
+            compatible = "st,vl53l0x";
+            reg = <0x29>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
new file mode 100644
index 0000000000..fbd3a2e322
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/vishay,vcnl3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Proximity Sensor With Infrared Emitter
+
+maintainers:
+  - Ivan Mikhaylov <i.mikhaylov@yadro.com>
+
+description: |
+  The VCNL3020 is a fully integrated proximity sensor. Fully integrated means
+  that the infrared emitter is included in the package. It has 16-bit
+  resolution. It includes a signal processing IC and features standard I2C
+  communication interface. It features an interrupt function.
+
+  Specifications about the devices can be found at:
+  https://www.vishay.com/docs/84150/vcnl3020.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,vcnl3020
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+  vishay,led-current-microamp:
+    description:
+      The driver current for the LED used in proximity sensing.
+    enum: [0, 10000, 20000, 30000, 40000, 50000, 60000, 70000, 80000, 90000,
+           100000, 110000, 120000, 130000, 140000, 150000, 160000, 170000,
+           180000, 190000, 200000]
+    default: 20000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@13 {
+              compatible = "vishay,vcnl3020";
+              reg = <0x13>;
+              vishay,led-current-microamp = <200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
new file mode 100644
index 0000000000..b24e5a202a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2S90 Resolver-to-Digital Converter
+
+maintainers:
+  - Matheus Tavares <matheus.bernardino@usp.br>
+
+description: |
+  Datasheet: https://www.analog.com/en/products/ad2s90.html
+
+properties:
+  compatible:
+    const: adi,ad2s90
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 830000
+    description: |
+      Chip's max frequency, as specified in its datasheet, is 2Mhz. But a 600ns
+      delay is expected between the application of a logic LO to CS and the
+      application of SCLK, as also specified. And since the delay is not
+      implemented in the spi code, to satisfy it, SCLK's period should be at
+      most 2 * 600ns, so the max frequency should be 1 / (2 * 6e-7), which gives
+      roughly 830000Hz.
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - reg
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        resolver@0 {
+            compatible = "adi,ad2s90";
+            reg = <0>;
+            spi-max-frequency = <830000>;
+            spi-cpol;
+            spi-cpha;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
new file mode 100644
index 0000000000..dd2ae2bd1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/samsung,sensorhub-rinato.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Sensorhub driver
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Sensorhub is a MCU which manages several sensors and also plays the role
+  of a virtual sensor device.
+
+properties:
+  compatible:
+    enum:
+      - samsung,sensorhub-rinato
+      - samsung,sensorhub-thermostat
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ap-mcu-gpios:
+    maxItems: 1
+    description:
+      Application Processor to sensorhub line - used during communication
+
+  mcu-ap-gpios:
+    maxItems: 1
+    description:
+      Sensorhub to Application Processor - used during communication
+
+  mcu-reset-gpios:
+    maxItems: 1
+    description:
+      Reset the sensorhub.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ap-mcu-gpios
+  - mcu-ap-gpios
+  - mcu-reset-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensorhub@0 {
+            compatible = "samsung,sensorhub-rinato";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupt-parent = <&gpx0>;
+            interrupts = <2 0>;
+            ap-mcu-gpios = <&gpx0 0 0>;
+            mcu-ap-gpios = <&gpx0 4 0>;
+            mcu-reset-gpios = <&gpx0 5 0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
new file mode 100644
index 0000000000..fff7e3d83a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/st,st-sensors.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MEMS sensors
+
+description: The STMicroelectronics sensor devices are pretty straight-forward
+  I2C or SPI devices, all sharing the same device tree descriptions no matter
+  what type of sensor it is.
+  Note that whilst this covers many STMicro MEMs sensors, some more complex
+  IMUs need their own bindings.
+
+maintainers:
+  - Denis Ciocca <denis.ciocca@st.com>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: STMicroelectronics Accelerometers
+        enum:
+          - st,h3lis331dl-accel
+          - st,lis2de12
+          - st,lis2dw12
+          - st,lis2hh12
+          - st,lis2dh12-accel
+          - st,lis302dl
+          - st,lis331dl-accel
+          - st,lis331dlh-accel
+          - st,lis3de
+          - st,lis3dh-accel
+          - st,lis3dhh
+          - st,lis3l02dq
+          - st,lis3lv02dl-accel
+          - st,lng2dm-accel
+          - st,lsm303agr-accel
+          - st,lsm303c-accel
+          - st,lsm303dl-accel
+          - st,lsm303dlh-accel
+          - st,lsm303dlhc-accel
+          - st,lsm303dlm-accel
+          - st,lsm330-accel
+          - st,lsm330d-accel
+          - st,lsm330dl-accel
+          - st,lsm330dlc-accel
+      - items:
+          - const: st,iis328dq
+          - const: st,h3lis331dl-accel
+      - description: Silan Accelerometers
+        enum:
+          - silan,sc7a20
+      - description: STMicroelectronics Gyroscopes
+        enum:
+          - st,l3g4200d-gyro
+          - st,l3g4is-gyro
+          - st,l3gd20-gyro
+          - st,l3gd20h-gyro
+          - st,lsm330-gyro
+          - st,lsm330d-gyro
+          - st,lsm330dl-gyro
+          - st,lsm330dlc-gyro
+          - st,lsm9ds0-gyro
+      - description: STMicroelectronics Magnetometers
+        enum:
+          - st,lis2mdl
+          - st,lis3mdl-magn
+          - st,lsm303agr-magn
+          - st,lsm303c-magn
+          - st,lsm303dlh-magn
+          - st,lsm303dlhc-magn
+          - st,lsm303dlm-magn
+          - st,lsm9ds1-magn
+      - description: STMicroelectronics Pressure Sensors
+        enum:
+          - st,lps001wp-press
+          - st,lps22df
+          - st,lps22hb-press
+          - st,lps22hh
+          - st,lps25h-press
+          - st,lps331ap-press
+          - st,lps33hw
+          - st,lps35hw
+      - description: IMUs
+        enum:
+          - st,lsm303d-imu
+          - st,lsm9ds0-imu
+      - description: Deprecated bindings
+        enum:
+          - st,lis302dl-spi
+          - st,lis3lv02d
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: interrupt line(s) connected to the DRDY line(s) and/or the
+      Inertial interrupt lines INT1 and INT2 if these exist. This means up to
+      three interrupts, and the DRDY must be the first one if it exists on
+      the package. The trigger edge of the interrupts is sometimes software
+      configurable in the hardware so the operating system should parse this
+      flag and set up the trigger edge as indicated in the device tree.
+    minItems: 1
+    maxItems: 2
+
+  vdd-supply: true
+  vddio-supply: true
+
+  st,drdy-int-pin:
+    description: the pin on the package that will be used to signal
+      "data ready" (valid values 1 or 2). This property is not configurable
+      on all sensors.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  drive-open-drain:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: the interrupt/data ready line will be configured
+      as open drain, which is useful if several sensors share the same
+      interrupt line. (This binding is taken from pinctrl.)
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            # These have no interrupts
+            - st,lps001wp
+    then:
+      properties:
+        interrupts: false
+        st,drdy-int-pin: false
+        drive-open-drain: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            # These have only DRDY
+            - st,lis2mdl
+            - st,lis3l02dq
+            - st,lis3lv02dl-accel
+            - st,lps22df
+            - st,lps22hb-press
+            - st,lps22hh
+            - st,lps25h-press
+            - st,lps33hw
+            - st,lps35hw
+            - st,lsm303agr-magn
+            - st,lsm303dlh-magn
+            - st,lsm303dlhc-magn
+            - st,lsm303dlm-magn
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        st,drdy-int-pin: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@1c {
+        compatible = "st,lis331dl-accel";
+        reg = <0x1c>;
+        st,drdy-int-pin = <1>;
+        vdd-supply = <&ldo1>;
+        vddio-supply = <&ldo2>;
+        interrupt-parent = <&gpio>;
+        interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+
+      l3g4200d: gyroscope@0 {
+        compatible = "st,l3g4200d-gyro";
+        st,drdy-int-pin = <2>;
+        reg = <0>;
+        vdd-supply = <&vcc_io>;
+        vddio-supply = <&vcc_io>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
new file mode 100644
index 0000000000..dbb85135fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -0,0 +1,556 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital
+  Temperature Measurement Systems
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf
+
+$defs:
+  sensor-node:
+    type: object
+    description: Sensor node common constraints
+
+    properties:
+      reg:
+        description:
+          Channel number. Connects the sensor to the channel with this number
+          of the device.
+        minimum: 1
+        maximum: 20
+
+      adi,sensor-type:
+        description: Type of sensor connected to the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - adi,sensor-type
+
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,ltc2983
+          - adi,ltc2986
+          - adi,ltm2985
+      - items:
+          - const: adi,ltc2984
+          - const: adi,ltc2983
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  adi,mux-delay-config-us:
+    description: |
+      Extra delay prior to each conversion, in addition to the internal 1ms
+      delay, for the multiplexer to switch input configurations and
+      excitation values.
+
+      This property is supposed to be in microseconds, but to maintain
+      compatibility, this value will be multiplied by 100 before usage.
+    maximum: 255
+    default: 0
+
+  adi,filter-notch-freq:
+    description:
+      Notch frequency of the digital filter.
+      0 - 50/60Hz rejection
+      1 - 60Hz rejection
+      2 - 50Hz rejection
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^thermocouple@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+
+    description: Thermocouple sensor.
+
+    properties:
+      adi,sensor-type:
+        description: |
+          1 - Type J Thermocouple
+          2 - Type K Thermocouple
+          3 - Type E Thermocouple
+          4 - Type N Thermocouple
+          5 - Type R Thermocouple
+          6 - Type S Thermocouple
+          7 - Type T Thermocouple
+          8 - Type B Thermocouple
+          9 - Custom Thermocouple
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 9
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+      adi,sensor-oc-current-microamp:
+        description: Pulsed current value applied during open-circuit detect.
+        enum: [10, 100, 500, 1000]
+        default: 10
+
+      adi,cold-junction-handle:
+        description:
+          Sensor responsible for measuring the thermocouple cold junction
+          temperature.
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      adi,custom-thermocouple:
+        description:
+          Used for digitizing custom thermocouples.
+          See Page 59 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/int64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 9
+        then:
+          required:
+            - adi,custom-thermocouple
+
+  "^diode@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+
+    description: Diode sensor.
+
+    properties:
+      adi,sensor-type:
+        description: Sensor type for diodes.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 28
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+      adi,three-conversion-cycles:
+        description:
+          Whether to use three conversion cycles to remove parasitic
+          resistance between the device and the diode.
+        type: boolean
+
+      adi,average-on:
+        description:
+          Whether to use a running average of the diode temperature
+          reading to reduce the noise when the diode is used as a cold
+          junction temperature element on an isothermal block where
+          temperatures change slowly.
+        type: boolean
+
+      adi,excitation-current-microamp:
+        description:
+          Magnitude of the 1l excitation current applied to the diode.
+          4l excitation current will be 4 times this value, and 8l
+          excitation current will be 8 times value.
+        enum: [10, 20, 40, 80]
+        default: 10
+
+      adi,ideal-factor-value:
+        description:
+          Diode ideality factor.
+          Set this property to 1000000 times the real value.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
+
+  "^rtd@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: RTD sensor.
+
+    properties:
+      reg:
+        minimum: 2
+        maximum: 20
+
+      adi,sensor-type:
+        description: |
+          10 - RTD PT-10
+          11 - RTD PT-50
+          12 - RTD PT-100
+          13 - RTD PT-200
+          14 - RTD PT-500
+          15 - RTD PT-1000
+          16 - RTD PT-1000 (0.00375)
+          17 - RTD NI-120
+          18 - RTD Custom
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 10
+        maximum: 18
+
+      adi,rsense-handle:
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      adi,number-of-wires:
+        description:
+          Number of wires used by the RTD.
+          5 means 4 wires with Kelvin sense resistor.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 3, 4, 5]
+        default: 2
+
+      adi,rsense-share:
+        description:
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
+        type: boolean
+
+      adi,excitation-current-microamp:
+        description: Excitation current applied to the RTD.
+        enum: [5, 10, 25, 50, 100, 250, 500, 1000]
+        default: 5
+
+      adi,rtd-curve:
+        description: |
+          RTD curve and the corresponding Callendar-VanDusen constants.
+          0 - European
+          1 - American
+          2 - Japanese
+          3 - ITS-90
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      adi,custom-rtd:
+        description:
+          Used for digitizing custom RTDs.
+          See Page 62 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
+
+    required:
+      - adi,rsense-handle
+
+    allOf:
+      - if:
+          properties:
+            adi,number-of-wires:
+              const: 4
+        then:
+          properties:
+            adi,current-rotate:
+              description:
+                Whether to enable excitation current rotation to automatically
+                remove parasitic thermocouple effects.
+              type: boolean
+
+          dependencies:
+            adi,current-rotate: [ "adi,rsense-share" ]
+
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 18
+        then:
+          required:
+            - adi,custom-rtd
+
+  "^thermistor@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Thermistor sensor.
+
+    properties:
+      adi,sensor-type:
+        description:
+          19 - Thermistor 44004/44033 2.252kohm at 25°C
+          20 - Thermistor 44005/44030 3kohm at 25°C
+          21 - Thermistor 44007/44034 5kohm at 25°C
+          22 - Thermistor 44006/44031 10kohm at 25°C
+          23 - Thermistor 44008/44032 30kohm at 25°C
+          24 - Thermistor YSI 400 2.252kohm at 25°C
+          25 - Thermistor Spectrum 1003k 1kohm
+          26 - Thermistor Custom Steinhart-Hart
+          27 - Custom Thermistor
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 19
+        maximum: 27
+
+      adi,rsense-handle:
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+      adi,rsense-share:
+        description:
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
+        type: boolean
+
+      adi,current-rotate:
+        description:
+          Whether to enable excitation current rotation to automatically
+          remove parasitic thermocouple effects.
+        type: boolean
+
+      adi,excitation-current-nanoamp:
+        description:
+          Excitation current applied to the thermistor.
+          0 sets the sensor in auto-range mode.
+        enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
+               500000, 1000000]
+        default: 0
+
+      adi,custom-thermistor:
+        description:
+          Used for digitizing custom thermistors.
+          See Page 65 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
+
+      adi,custom-steinhart:
+        description:
+          Steinhart-Hart coefficients in raw format, used for digitizing
+          custom thermistors.
+          See Page 68 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 6
+        maxItems: 6
+
+    required:
+      - adi,rsense-handle
+
+    dependencies:
+      adi,current-rotate: [ "adi,rsense-share" ]
+
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 26
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-steinhart
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 27
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-thermistor
+
+  "^adc@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Direct ADC sensor.
+
+    properties:
+      adi,sensor-type:
+        description: Sensor type for direct ADC sensors.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 30
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+  "^temp@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Active analog temperature sensor.
+
+    properties:
+      adi,sensor-type:
+        description: Sensor type for active analog temperature sensors.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 31
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+      adi,custom-temp:
+        description:
+          Used for digitizing active analog temperature sensors.
+          See Page 67 of the LTM2985 datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    required:
+      - adi,custom-temp
+
+  "^rsense@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Sense resistor sensor.
+
+    properties:
+      reg:
+        minimum: 2
+        maximum: 20
+
+      adi,sensor-type:
+        description: Sensor type sense resistor sensors.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 29
+
+      adi,rsense-val-milli-ohms:
+        description: Value of the sense resistor.
+
+    required:
+      - adi,rsense-val-milli-ohms
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ltc2983
+              - adi,ltc2984
+    then:
+      patternProperties:
+        "^temp@": false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@0 {
+            compatible = "adi,ltc2983";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+
+            thermocouple@18 {
+                reg = <18>;
+                adi,sensor-type = <8>; //Type B
+                adi,sensor-oc-current-microamp = <10>;
+                adi,cold-junction-handle = <&diode5>;
+            };
+
+            diode5: diode@5 {
+                reg = <5>;
+                adi,sensor-type = <28>;
+            };
+
+            rsense2: rsense@2 {
+                reg = <2>;
+                adi,sensor-type = <29>;
+                adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
+            };
+
+            rtd@14 {
+                reg = <14>;
+                adi,sensor-type = <15>; //PT1000
+                /*2-wire, internal gnd, no current rotation*/
+                adi,number-of-wires = <2>;
+                adi,rsense-share;
+                adi,excitation-current-microamp = <500>;
+                adi,rsense-handle = <&rsense2>;
+            };
+
+            adc@10 {
+                reg = <10>;
+                adi,sensor-type = <30>;
+                adi,single-ended;
+            };
+
+            thermistor@12 {
+                reg = <12>;
+                adi,sensor-type = <26>; //Steinhart
+                adi,rsense-handle = <&rsense2>;
+                adi,custom-steinhart = <0x00f371ec 0x12345678
+                                0x2c0f8733 0x10018c66 0xa0feaccd
+                                0x90021d99>; //6 entries
+            };
+
+            thermocouple@20 {
+                reg = <20>;
+                adi,sensor-type = <9>; //custom thermocouple
+                adi,single-ended;
+                adi,custom-thermocouple =
+                         /bits/ 64 <(-50220000) 0>,
+                         /bits/ 64 <(-30200000) 99100000>,
+                         /bits/ 64 <(-5300000) 135400000>,
+                         /bits/ 64 <0 273150000>,
+                         /bits/ 64 <40200000 361200000>,
+                         /bits/ 64 <55300000 522100000>,
+                         /bits/ 64 <88300000 720300000>,
+                         /bits/ 64 <132200000 811200000>,
+                         /bits/ 64 <188700000 922500000>,
+                         /bits/ 64 <460400000 1000000000>; //10 pairs
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
new file mode 100644
index 0000000000..0805ed7e21
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31855 and similar thermocouples
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf
+  https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf
+
+properties:
+  compatible:
+    description:
+      The generic maxim,max31855 compatible is deprecated in favour of
+      the thermocouple type specific variants.
+    enum:
+      - maxim,max6675
+      - maxim,max31855
+      - maxim,max31855k
+      - maxim,max31855j
+      - maxim,max31855n
+      - maxim,max31855s
+      - maxim,max31855t
+      - maxim,max31855e
+      - maxim,max31855r
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max6675
+    then:
+      required:
+        - spi-cpha
+    else:
+      properties:
+        spi-cpha: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@0 {
+            compatible = "maxim,max31855k";
+            reg = <0>;
+            spi-max-frequency = <4300000>;
+        };
+        temp-sensor@1 {
+            compatible = "maxim,max6675";
+            reg = <1>;
+            spi-max-frequency = <4300000>;
+            spi-cpha;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
new file mode 100644
index 0000000000..228a941654
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31856 thermocouple support
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
+
+properties:
+  compatible:
+    const: maxim,max31856
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  thermocouple-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+      Use defines in dt-bindings/iio/temperature/thermocouple.h.
+      Supported types are B, E, J, K, N, R, S, T.
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/temperature/thermocouple.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@0 {
+            compatible = "maxim,max31856";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
new file mode 100644
index 0000000000..7cc365e0eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31865 Resistance Temperature Detector.
+
+maintainers:
+  - Navin Sankar Velliangiri <navin@linumiz.com>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf
+
+properties:
+  compatible:
+    const: maxim,max31865
+
+  reg:
+    maxItems: 1
+
+  maxim,3-wire:
+    description:
+      Identifies the number of wires used by the RTD. Setting this property
+      enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
+    type: boolean
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       temperature-sensor@0 {
+           compatible = "maxim,max31865";
+           reg = <0>;
+           spi-max-frequency = <400000>;
+           spi-cpha;
+           maxim,3-wire;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
new file mode 100644
index 0000000000..654d31f65d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis MLX90614/MLX90615 contactless IR temperature sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+  - Crt Mori <cmo@melexis.com>
+
+description: |
+  http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx
+
+properties:
+  compatible:
+    enum:
+      - melexis,mlx90614
+      - melexis,mlx90615
+
+  reg:
+    maxItems: 1
+
+  wakeup-gpios:
+    description:
+      GPIO connected to the SDA line to hold low in order to wake up the
+      device.  In normal operation, the GPIO is set as input and will
+      not interfere in I2C communication.  There is no need for a GPIO
+      driving the SCL line.  If no GPIO is given, power management is disabled.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@5a {
+            compatible = "melexis,mlx90614";
+            reg = <0x5a>;
+            wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
new file mode 100644
index 0000000000..4a55e7f25a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melexis MLX90632 contactless Infra Red temperature sensor
+
+maintainers:
+  - Crt Mori <cmo@melexis.com>
+
+description: |
+  https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632
+
+  There are various applications for the Infra Red contactless temperature
+  sensor and MLX90632 is most suitable for consumer applications where
+  measured object temperature is in range between -20 to 200 degrees
+  Celsius with relative error of measurement below 1 degree Celsius in
+  object temperature range for industrial applications. Since it can
+  operate and measure ambient temperature in range of -20 to 85 degrees
+  Celsius it is suitable also for outdoor use.
+
+  Be aware that electronics surrounding the sensor can increase ambient
+  temperature. MLX90632 can be calibrated to reduce the housing effect via
+  already existing EEPROM parameters.
+
+  Since measured object emissivity effects Infra Red energy emitted,
+  emissivity should be set before requesting the object temperature.
+
+properties:
+  compatible:
+    const: melexis,mlx90632
+
+  reg:
+    maxItems: 1
+    description: Default is 0x3a, but can be reprogrammed.
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@3a {
+            compatible = "melexis,mlx90632";
+            reg = <0x3a>;
+            vdd-supply = <&ldo4_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
new file mode 100644
index 0000000000..d43002b9bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMP006 IR thermopile sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package.
+  https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf
+
+properties:
+  compatible:
+    const: ti,tmp006
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        temperature-sensor@40 {
+            compatible = "ti,tmp006";
+            reg = <0x40>;
+            vdd-supply = <&ldo4_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml
new file mode 100644
index 0000000000..3c2b7189fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp007.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR thermopile sensor with integrated math engine
+
+maintainers:
+  - Manivannan Sadhasivam <manivannanece23@gmail.com>
+
+description: |
+  http://www.ti.com/lit/ds/symlink/tmp007.pdf
+
+properties:
+  compatible:
+    const: ti,tmp007
+
+  reg:
+    description: |
+      The I2C address of the sensor (changeable via ADR pins)
+      ------------------------------
+      |ADR1 | ADR0 | Device Address|
+      ------------------------------
+         0      0        0x40
+         0      1        0x41
+         0     SDA       0x42
+         0     SCL       0x43
+         1      0        0x44
+         1      1        0x45
+         1     SDA       0x46
+         1     SCL       0x47
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@40 {
+            compatible = "ti,tmp007";
+            reg = <0x40>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 0x08>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
new file mode 100644
index 0000000000..8c6d7735e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMP117 - Digital temperature sensor with integrated NV memory
+
+description: |
+    TI TMP116/117 - Digital temperature sensor with integrated NV memory that
+    supports I2C interface.
+      https://www.ti.com/lit/gpn/tmp116
+      https://www.ti.com/lit/gpn/tmp117
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp116
+      - ti,tmp117
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tmp117@48 {
+             compatible = "ti,tmp117";
+             reg = <0x48>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst
new file mode 100644
index 0000000000..d9002a3a0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. toctree::
+   :maxdepth: 1
+
+   ABI
+   writing-bindings
+   writing-schema
+   submitting-patches
diff --git a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
new file mode 100644
index 0000000000..be31cf05cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt
@@ -0,0 +1,108 @@
+Hisilicon RoCE DT description
+
+Hisilicon RoCE engine is a part of network subsystem.
+It works depending on other part of network subsystem, such as gmac and
+dsa fabric.
+
+Additional properties are described here:
+
+Required properties:
+- compatible: Should contain "hisilicon,hns-roce-v1".
+- reg: Physical base address of the RoCE driver and
+length of memory mapped region.
+- eth-handle: phandle, specifies a reference to a node
+representing a ethernet device.
+- dsaf-handle: phandle, specifies a reference to a node
+representing a dsaf device.
+- node_guid: a number that uniquely identifies a device or component
+- #address-cells: must be 2
+- #size-cells: must be 2
+Optional properties:
+- dma-coherent: Present if DMA operations are coherent.
+- interrupts: should contain 32 completion event irq,1 async event irq
+and 1 event overflow irq.
+- interrupt-names:should be one of 34 irqs for roce device
+  - hns-roce-comp-0 ~ hns-roce-comp-31: 32 complete event irq
+  - hns-roce-async: 1 async event irq
+  - hns-roce-common: named common exception warning irq
+Example:
+	infiniband@c4000000 {
+			compatible = "hisilicon,hns-roce-v1";
+			reg = <0x0 0xc4000000 0x0 0x100000>;
+			dma-coherent;
+			eth-handle = <&eth2 &eth3 &eth4 &eth5 &eth6 &eth7>;
+			dsaf-handle = <&soc0_dsa>;
+			node-guid = [00 9A CD 00 00 01 02 03];
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&mbigen_dsa>;
+			interrupts = <722 1>,
+					<723 1>,
+					<724 1>,
+					<725 1>,
+					<726 1>,
+					<727 1>,
+					<728 1>,
+					<729 1>,
+					<730 1>,
+					<731 1>,
+					<732 1>,
+					<733 1>,
+					<734 1>,
+					<735 1>,
+					<736 1>,
+					<737 1>,
+					<738 1>,
+					<739 1>,
+					<740 1>,
+					<741 1>,
+					<742 1>,
+					<743 1>,
+					<744 1>,
+					<745 1>,
+					<746 1>,
+					<747 1>,
+					<748 1>,
+					<749 1>,
+					<750 1>,
+					<751 1>,
+					<752 1>,
+					<753 1>,
+					<785 1>,
+					<754 4>;
+
+			interrupt-names = "hns-roce-comp-0",
+					"hns-roce-comp-1",
+					"hns-roce-comp-2",
+					"hns-roce-comp-3",
+					"hns-roce-comp-4",
+					"hns-roce-comp-5",
+					"hns-roce-comp-6",
+					"hns-roce-comp-7",
+					"hns-roce-comp-8",
+					"hns-roce-comp-9",
+					"hns-roce-comp-10",
+					"hns-roce-comp-11",
+					"hns-roce-comp-12",
+					"hns-roce-comp-13",
+					"hns-roce-comp-14",
+					"hns-roce-comp-15",
+					"hns-roce-comp-16",
+					"hns-roce-comp-17",
+					"hns-roce-comp-18",
+					"hns-roce-comp-19",
+					"hns-roce-comp-20",
+					"hns-roce-comp-21",
+					"hns-roce-comp-22",
+					"hns-roce-comp-23",
+					"hns-roce-comp-24",
+					"hns-roce-comp-25",
+					"hns-roce-comp-26",
+					"hns-roce-comp-27",
+					"hns-roce-comp-28",
+					"hns-roce-comp-29",
+					"hns-roce-comp-30",
+					"hns-roce-comp-31",
+					"hns-roce-async",
+					"hns-roce-common";
+		};
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
new file mode 100644
index 0000000000..6c244d66f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-joystick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached joystick
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+description: >
+  Bindings for joystick devices connected to ADC controllers supporting
+  the Industrial I/O subsystem.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-joystick
+
+  io-channels:
+    minItems: 1
+    maxItems: 1024
+    description: >
+      List of phandle and IIO specifier pairs.
+      Each pair defines one ADC channel to which a joystick axis is connected.
+      See
+      https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
+      for details.
+
+  poll-interval: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - io-channels
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+patternProperties:
+  "^axis@[0-9a-f]+$":
+    type: object
+    $ref: input.yaml#
+    description: >
+      Represents a joystick axis bound to the given ADC channel.
+      For each entry in the io-channels list, one axis subnode with a matching
+      reg property must be specified.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of an io-channels list entry bound to this axis.
+
+      linux,code:
+        description: EV_ABS specific event code generated by the axis.
+
+      abs-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
+        description: >
+          Minimum and maximum values produced by the axis.
+          For an ABS_X axis this will be the left-most and right-most
+          inclination of the joystick. If min > max, it is left to userspace to
+          treat the axis as inverted.
+          This property is interpreted as two signed 32 bit values.
+
+      abs-fuzz:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Amount of noise in the input value.
+          Omitting this property indicates the axis is precise.
+
+      abs-flat:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Axial "deadzone", or area around the center position, where the axis
+          is considered to be at rest.
+          Omitting this property indicates the axis always returns to exactly
+          the center position.
+
+    required:
+      - reg
+      - linux,code
+      - abs-range
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+    #include <dt-bindings/input/input.h>
+
+    joystick: adc-joystick {
+      compatible = "adc-joystick";
+      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
+                    <&adc INGENIC_ADC_TOUCH_YP>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      axis@0 {
+              reg = <0>;
+              linux,code = <ABS_X>;
+              abs-range = <3300 0>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+      axis@1 {
+              reg = <1>;
+              linux,code = <ABS_Y>;
+              abs-range = <0 3300>;
+              abs-fuzz = <4>;
+              abs-flat = <200>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml
new file mode 100644
index 0000000000..7aa078dead
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached resistor ladder buttons
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-keys
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: buttons
+
+  keyup-threshold-microvolt:
+    description:
+      Voltage above or equal to which all the keys are considered up.
+
+  poll-interval: true
+  autorepeat: true
+
+patternProperties:
+  '^button-':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each button (key) is represented as a sub-node.
+
+    properties:
+      label: true
+
+      linux,code: true
+
+      press-threshold-microvolt:
+        description:
+          Voltage above or equal to which this key is considered pressed. No
+          two values of press-threshold-microvolt may be the same. All values
+          of press-threshold-microvolt must be less than
+          keyup-threshold-microvolt.
+
+    required:
+      - linux,code
+      - press-threshold-microvolt
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - keyup-threshold-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    // +--------------------------------+------------------------+
+    // | 2.000.000 <= value             | no key pressed         |
+    // +--------------------------------+------------------------+
+    // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
+    // +--------------------------------+------------------------+
+    // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
+    // +--------------------------------+------------------------+
+    // |   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
+    // +--------------------------------+------------------------+
+    // |              value <   500.000 | no key pressed         |
+    // +--------------------------------+------------------------+
+
+    adc-keys {
+        compatible = "adc-keys";
+        io-channels = <&lradc 0>;
+        io-channel-names = "buttons";
+        keyup-threshold-microvolt = <2000000>;
+
+        button-up {
+            label = "Volume Up";
+            linux,code = <KEY_VOLUMEUP>;
+            press-threshold-microvolt = <1500000>;
+        };
+
+        button-down {
+            label = "Volume Down";
+            linux,code = <KEY_VOLUMEDOWN>;
+            press-threshold-microvolt = <1000000>;
+        };
+
+        button-enter {
+            label = "Enter";
+            linux,code = <KEY_ENTER>;
+            press-threshold-microvolt = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 0000000000..26ea66834a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - keypad,num-rows
+  - keypad,num-columns
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
new file mode 100644
index 0000000000..5efceb3138
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 LRADC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-lradc-keys
+      - const: allwinner,sun8i-a83t-r-lradc
+      - items:
+          - enum:
+              - allwinner,suniv-f1c100s-lradc
+              - allwinner,sun50i-a64-lradc
+          - const: allwinner,sun8i-a83t-r-lradc
+      - const: allwinner,sun50i-r329-lradc
+      - items:
+          - const: allwinner,sun20i-d1-lradc
+          - const: allwinner,sun50i-r329-lradc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Regulator for the LRADC reference voltage
+
+  wakeup-source: true
+
+patternProperties:
+  "^button-[0-9]+$":
+    type: object
+    $ref: input.yaml#
+    properties:
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Descriptive name of the key
+
+      linux,code: true
+
+      channel:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: ADC Channel this key is attached to
+
+      voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Voltage in microvolts at LRADC input when this key is
+          pressed
+
+    required:
+      - label
+      - linux,code
+      - channel
+      - voltage
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vref-supply
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-lradc
+
+then:
+  required:
+    - clocks
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    lradc: lradc@1c22800 {
+        compatible = "allwinner,sun4i-a10-lradc-keys";
+        reg = <0x01c22800 0x100>;
+        interrupts = <31>;
+        vref-supply = <&reg_vcc3v0>;
+
+        button-191 {
+            label = "Volume Up";
+            linux,code = <115>;
+            channel = <0>;
+            voltage = <191274>;
+        };
+
+        button-392 {
+            label = "Volume Down";
+            linux,code = <114>;
+            channel = <0>;
+            voltage = <392644>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
new file mode 100644
index 0000000000..442f623bb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dell Wyse 3020 a.k.a. "Ariel" Power Button
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The ENE Embedded Controller on the Ariel board has an interface to the
+  SPI bus that is capable of sending keyboard and mouse data. A single
+  power button is attached to it. This binding describes this
+  configuration.
+
+allOf:
+  - $ref: input.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: dell,wyse-ariel-ec-input
+      - const: ene,kb3930-input
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-button@0 {
+            compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <33000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
new file mode 100644
index 0000000000..fe9ee5c53b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,captouch.txt
@@ -0,0 +1,36 @@
+Device tree bindings for Atmel capacitive touch device, typically
+an Atmel touch sensor connected to AtmegaXX MCU running firmware
+based on Qtouch library.
+
+The node for this device must be a child of a I2C controller node, as the
+device communicates via I2C.
+
+Required properties:
+
+	compatible:	Must be "atmel,captouch".
+	reg:		The I2C slave address of the device.
+	interrupts:	Property describing the interrupt line the device
+			is connected to. The device only has one interrupt
+			source.
+	linux,keycodes:	Specifies an array of numeric keycode values to
+			be used for reporting button presses. The array can
+			contain up to 8 entries.
+
+Optional properties:
+
+	autorepeat:	Enables the Linux input system's autorepeat
+			feature on the input device.
+
+Example:
+
+	atmel-captouch@51 {
+		compatible = "atmel,captouch";
+		reg = <0x51>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+		linux,keycodes = <BTN_0>, <BTN_1>,
+			<BTN_2>, <BTN_3>,
+			<BTN_4>, <BTN_5>,
+			<BTN_6>, <BTN_7>;
+		autorepeat;
+	};
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
new file mode 100644
index 0000000000..c40799355e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel maXTouch touchscreen/touchpad
+
+maintainers:
+  - Nick Dyer <nick@shmanahar.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Atmel maXTouch touchscreen or touchpads such as the mXT244
+  and similar devices.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: atmel,maxtouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdda-supply:
+    description:
+      Optional regulator for the AVDD analog voltage.
+
+  vdd-supply:
+    description:
+      Optional regulator for the VDD digital voltage.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Optional GPIO specifier for the touchscreen's reset pin
+      (active low). The line must be flagged with
+      GPIO_ACTIVE_LOW.
+
+  wake-gpios:
+    maxItems: 1
+    description:
+      Optional GPIO specifier for the touchscreen's wake pin
+      (active low). The line must be flagged with
+      GPIO_ACTIVE_LOW.
+
+  linux,gpio-keymap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      When enabled, the SPT_GPIOPWN_T19 object sends messages
+      on GPIO bit changes. An array of up to 8 entries can be provided
+      indicating the Linux keycode mapped to each bit of the status byte,
+      starting at the LSB. Linux keycodes are defined in
+      <dt-bindings/input/input.h>.
+
+      Note: the numbering of the GPIOs and the bit they start at varies
+      between maXTouch devices. You must either refer to the documentation,
+      or experiment to determine which bit corresponds to which input. Use
+      KEY_RESERVED for unused padding values.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+  atmel,wakeup-method:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The WAKE line is an active-low input that is used to wake up the touch
+      controller from deep-sleep mode before communication with the controller
+      could be started. This optional feature used to minimize current
+      consumption when the controller is in deep sleep mode. This feature is
+      relevant only to some controller families, like mXT1386 controller for
+      example.
+
+      The WAKE pin can be connected in one of the following ways:
+       1) left permanently low
+       2) connected to the I2C-compatible SCL pin
+       3) connected to a GPIO pin on the host
+    enum:
+      - 0 # ATMEL_MXT_WAKEUP_NONE
+      - 1 # ATMEL_MXT_WAKEUP_I2C_SCL
+      - 2 # ATMEL_MXT_WAKEUP_GPIO
+    default: 0
+
+  wakeup-source:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/atmel-maxtouch.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@4a {
+        compatible = "atmel,maxtouch";
+        reg = <0x4a>;
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+        vdda-supply = <&ab8500_ldo_aux2_reg>;
+        vdd-supply = <&ab8500_ldo_aux5_reg>;
+        atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
new file mode 100644
index 0000000000..5b1769c19b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -0,0 +1,1148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7222A/B/C/D Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7222A, IQS7222B, IQS7222C and IQS7222D are multichannel
+  capacitive touch controllers that feature additional sensing capabilities.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7222a
+      - azoteq,iqs7222b
+      - azoteq,iqs7222c
+      - azoteq,iqs7222d
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,max-counts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the maximum number of conversion periods (counts) that can be
+      reported as follows:
+      0: 1023
+      1: 2047
+      2: 4095
+      3: 16384
+
+  azoteq,auto-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the number of conversions to occur before an interrupt is
+      generated as follows:
+      0: 4
+      1: 8
+      2: 16
+      3: 32
+
+  azoteq,ati-frac-div-fine:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI fine fractional divider.
+
+  azoteq,ati-frac-div-coarse:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI coarse fractional divider.
+
+  azoteq,ati-comp-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1023
+    description: Specifies the preloaded ATI compensation selection.
+
+  azoteq,lta-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      low-power mode.
+
+  azoteq,lta-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      normal-power mode.
+
+  azoteq,counts-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during low-power
+      mode.
+
+  azoteq,counts-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during normal-
+      power mode.
+
+  azoteq,lta-fast-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during low-power mode.
+
+  azoteq,lta-fast-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during normal-power mode.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 500
+    minimum: 0
+    maximum: 32767500
+    description:
+      Specifies the delay (in ms) before ATI is retried following an ATI error.
+
+  azoteq,rate-ati-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the rate (in ms) at which ATI status is evaluated.
+
+  azoteq,timeout-np-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,timeout-lp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode to ultra-low-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,timeout-ulp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the rate (in ms) at which channels not regularly sampled during
+      ultra-low-power mode are updated.
+
+  azoteq,rate-ulp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+  trackpad:
+    type: object
+    description: Represents all channels associated with the trackpad.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 12
+        items:
+          minimum: 0
+          maximum: 13
+        description:
+          Specifies the order of the channels that participate in the trackpad.
+          Specify 255 to omit a given channel for the purpose of mapping a non-
+          rectangular trackpad.
+
+      azoteq,num-rows:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 12
+        description: Specifies the number of rows that comprise the trackpad.
+
+      azoteq,num-cols:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 12
+        description: Specifies the number of columns that comprise the trackpad.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 4
+        minimum: 0
+        maximum: 1020
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is linearly reduced.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the trackpad to respond to the proximity states of the
+          selected channels instead of their corresponding touch states.
+          Note the trackpad cannot report granular coordinates during a
+          state of proximity.
+
+    patternProperties:
+      "^azoteq,lower-cal-(x|y)$":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's lower starting points.
+
+      "^azoteq,upper-cal-(x|y)$":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's upper starting points.
+
+      "^event-(press|tap|(swipe|flick)-(x|y)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture event reported by the trackpad. Specify
+          'linux,code' under the press event to report absolute coordinates.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-angle-tighten:
+            type: boolean
+            description:
+              Limits the tangent of the gesture angle to 0.5 (axial gestures
+              only). If specified in one direction, the effect is applied in
+              either direction.
+
+          azoteq,gesture-max-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all other swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the distance (in coordinates) across which a swipe or
+              flick gesture must travel in order to be acknowledged by the
+              device. The number specified for any one swipe or flick gesture
+              applies to all remaining swipe or flick gestures.
+
+              For tap gestures, this property specifies the distance from the
+              original point of contact across which the contact is permitted
+              to travel before the gesture is rejected by the device.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3
+              2: GPIO4
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              trackpad gesture).
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+patternProperties:
+  "^cycle-[0-9]$":
+    type: object
+    description: Represents a conversion cycle serving two sensing channels.
+
+    properties:
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion frequency fraction.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 9
+        items:
+          minimum: 0
+          maximum: 8
+        description: Specifies the CTx pin(s) associated with the cycle.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRx pins instead of grounding them.
+
+      azoteq,dead-time-enable:
+        type: boolean
+        description:
+          Increases the denominator of the conversion frequency formula by one.
+
+      azoteq,tx-freq-fosc:
+        type: boolean
+        description:
+          Fixes the conversion frequency to that of the device's core clock.
+
+      azoteq,vbias-enable:
+        type: boolean
+        description: Enables the bias voltage for use during inductive sensing.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the cycle's sensing mode as follows:
+          0: None
+          1: Self capacitive
+          2: Mutual capacitive
+          3: Inductive
+
+          Note that in the case of IQS7222A, cycles 5 and 6 are restricted to
+          Hall-effect sensing.
+
+      azoteq,iref-enable:
+        type: boolean
+        description:
+          Enables the current reference for use during various sensing modes.
+
+      azoteq,iref-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference level.
+
+      azoteq,iref-trim:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference trim.
+
+    dependencies:
+      azoteq,iref-level: ["azoteq,iref-enable"]
+      azoteq,iref-trim: ["azoteq,iref-enable"]
+
+    additionalProperties: false
+
+  "^channel-([0-9]|1[0-9])$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+      Note that in the case of IQS7222A, channels 10 and 11 are restricted to
+      Hall-effect sensing with events reported on channel 10 only.
+
+    properties:
+      azoteq,ulp-allow:
+        type: boolean
+        description:
+          Permits the device to enter ultra-low-power mode while the channel
+          lies in a state of touch or proximity.
+
+      azoteq,ref-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 9
+        description: Specifies a separate reference channel to be followed.
+
+      azoteq,ref-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the relative weight of the reference channel.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Activates the reference channel in response to proximity events
+          instead of touch events.
+
+      azoteq,counts-filt-enable:
+        type: boolean
+        description: Applies counts filtering to the channel.
+
+      azoteq,ati-band:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI band as a fraction of its ATI target as
+          follows:
+          0: 1/16
+          1: 1/8
+          2: 1/4
+          3: 1/2
+
+      azoteq,global-halt:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze if any
+          other participating channel lies in a proximity or touch state.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity and touch
+          events relative to their respective thresholds.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 7
+        description: Specifies the CRx pin(s) associated with the channel.
+
+      azoteq,samp-cap-double:
+        type: boolean
+        description: Doubles the sampling capacitance from 40 pF to 80 pF.
+
+      azoteq,vref-half:
+        type: boolean
+        description: Halves the discharge threshold from 1.0 V to 0.5 V.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the bias current applied during mutual (projected)
+          capacitive sensing as follows:
+          0: 2 uA
+          1: 5 uA
+          2: 7 uA
+          3: 10 uA
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 2040
+        description: Specifies the channel's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 16
+        minimum: 0
+        maximum: 496
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Compensation
+          2: Compensation divider
+          3: Fine fractional divider
+          4: Coarse fractional divider
+          5: Full
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI compensation divider.
+
+      azoteq,ati-comp-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1023
+        description: Specifies the channel's ATI compensation selection.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce exit factor.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity or touch event reported by the channel.
+
+        properties:
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3
+              2: GPIO4
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider/trackpad gesture).
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Specifies the threshold for the event. Valid entries range from
+              0-127 and 0-255 for proximity and touch events, respectively.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description:
+              Specifies the hysteresis for the event (touch events only).
+
+          azoteq,timeout-press-ms:
+            multipleOf: 500
+            minimum: 0
+            maximum: 127500
+            description:
+              Specifies the length of time (in ms) to wait before automatically
+              releasing a press event. Specify zero to allow the press state to
+              persist indefinitely.
+
+              The IQS7222B does not feature channel-specific timeouts; the time-
+              out specified for any one channel applies to all channels.
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            default: 1
+            description:
+              Specifies whether the event is to be interpreted as a key (1)
+              or a switch (5).
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,ref-weight: ["azoteq,ref-select"]
+      azoteq,use-prox: ["azoteq,ref-select"]
+
+    additionalProperties: false
+
+  "^slider-[0-1]$":
+    type: object
+    description: Represents a slider comprising three or four channels.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 9
+        description:
+          Specifies the order of the channels that participate in the slider.
+
+      azoteq,slider-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 65535
+        description:
+          Specifies the slider's one-dimensional resolution, equal to the
+          maximum coordinate plus one.
+
+      azoteq,lower-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's lower starting point.
+
+      azoteq,upper-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's upper starting point.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is linearly reduced.
+
+      azoteq,bottom-beta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        description:
+          Specifies the coordinate filter damping factor to be applied
+          while the speed of movement is below that which is specified
+          by azoteq,bottom-speed.
+
+      azoteq,static-beta:
+        type: boolean
+        description:
+          Applies the coordinate filter damping factor specified by
+          azoteq,bottom-beta regardless of the speed of movement.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the slider to respond to the proximity states of the selected
+          channels instead of their corresponding touch states. Note the slider
+          cannot report granular coordinates during a state of proximity.
+
+      linux,axis:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the absolute axis to which coordinates are mapped. Specify
+          ABS_WHEEL to operate the slider as a wheel (IQS7222C only).
+
+    patternProperties:
+      "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture (IQS7222A only) event reported by
+          the slider.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all remaining swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 496
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the distance (in coordinates) across which a swipe or
+              flick gesture must travel in order to be acknowledged by the
+              device. The number specified for any one swipe or flick gesture
+              applies to all remaining swipe or flick gestures.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3
+              2: GPIO4
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+  "^gpio-[0-2]$":
+    type: object
+    description: |
+      Represents a GPIO mapped to one or more events as follows:
+      gpio-0: GPIO0
+      gpio-1: GPIO3
+      gpio-2: GPIO4
+
+    allOf:
+      - $ref: ../pinctrl/pincfg-node.yaml#
+
+    properties:
+      drive-open-drain: true
+
+    additionalProperties: false
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - azoteq,iqs7222a
+              - azoteq,iqs7222b
+              - azoteq,iqs7222c
+
+    then:
+      properties:
+        touchscreen-size-x: false
+        touchscreen-size-y: false
+        touchscreen-inverted-x: false
+        touchscreen-inverted-y: false
+        touchscreen-swapped-x-y: false
+
+        trackpad: false
+
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,counts-filt-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - azoteq,iqs7222b
+              - azoteq,iqs7222c
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ulp-allow: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - azoteq,iqs7222b
+              - azoteq,iqs7222d
+
+    then:
+      patternProperties:
+        "^cycle-[0-9]$":
+          properties:
+            azoteq,iref-enable: false
+
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ref-select: false
+
+        "^slider-[0-1]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222b
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select: false
+
+        "^gpio-[0-2]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222a
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+        "^slider-[0-1]$":
+          properties:
+            azoteq,slider-size:
+              multipleOf: 16
+              minimum: 16
+              maximum: 4080
+
+            azoteq,top-speed:
+              multipleOf: 4
+              maximum: 1020
+
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+    else:
+      patternProperties:
+        "^slider-[0-1]$":
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gesture-max-ms: false
+
+                azoteq,gesture-min-ms: false
+
+                azoteq,gesture-dist: false
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs7222a@44 {
+                    compatible = "azoteq,iqs7222a";
+                    reg = <0x44>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    azoteq,lta-beta-lp = <7>;
+                    azoteq,lta-beta-np = <8>;
+                    azoteq,counts-beta-lp = <2>;
+                    azoteq,counts-beta-np = <3>;
+                    azoteq,lta-fast-beta-lp = <3>;
+                    azoteq,lta-fast-beta-np = <4>;
+
+                    cycle-0 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>, <2>, <4>, <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-1 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-2 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <4>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-3 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <2>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-4 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-5 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    cycle-6 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    channel-0 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-1 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-2 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-3 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-4 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-5 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <144>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-6 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+
+                    channel-7 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+                    };
+
+                    channel-8 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+                    };
+
+                    channel-9 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel-10 {
+                            azoteq,ulp-allow;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                                    linux,input-type = <EV_SW>;
+                            };
+                    };
+
+                    channel-11 {
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+                    };
+
+                    slider-0 {
+                            azoteq,channel-select = <1>, <2>, <3>, <4>;
+                            azoteq,slider-size = <4080>;
+                            azoteq,upper-cal = <50>;
+                            azoteq,lower-cal = <30>;
+                            azoteq,top-speed = <200>;
+                            azoteq,bottom-speed = <1>;
+                            azoteq,bottom-beta = <3>;
+
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
+                            };
+
+                            event-flick-pos {
+                                    linux,code = <KEY_NEXTSONG>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
+                            };
+
+                            event-flick-neg {
+                                    linux,code = <KEY_PREVIOUSSONG>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
new file mode 100644
index 0000000000..262deab735
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
@@ -0,0 +1,107 @@
+* Broadcom Keypad Controller device tree bindings
+
+Broadcom Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be "brcm,bcm-keypad"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: The interrupt number to the cpu.
+
+Board Specific Properties:
+- keypad,num-rows: Number of row lines connected to the keypad
+  controller.
+
+- keypad,num-columns: Number of column lines connected to the
+  keypad controller.
+
+- col-debounce-filter-period: The debounce period for the Column filter.
+
+	KEYPAD_DEBOUNCE_1_ms	=	0
+	KEYPAD_DEBOUNCE_2_ms	=	1
+	KEYPAD_DEBOUNCE_4_ms	=	2
+	KEYPAD_DEBOUNCE_8_ms	=	3
+	KEYPAD_DEBOUNCE_16_ms	=	4
+	KEYPAD_DEBOUNCE_32_ms	=	5
+	KEYPAD_DEBOUNCE_64_ms	=	6
+	KEYPAD_DEBOUNCE_128_ms	=	7
+
+- status-debounce-filter-period: The debounce period for the Status filter.
+
+	KEYPAD_DEBOUNCE_1_ms	=	0
+	KEYPAD_DEBOUNCE_2_ms	=	1
+	KEYPAD_DEBOUNCE_4_ms	=	2
+	KEYPAD_DEBOUNCE_8_ms	=	3
+	KEYPAD_DEBOUNCE_16_ms	=	4
+	KEYPAD_DEBOUNCE_32_ms	=	5
+	KEYPAD_DEBOUNCE_64_ms	=	6
+	KEYPAD_DEBOUNCE_128_ms	=	7
+
+- row-output-enabled: An optional property indicating whether the row or
+  column is being used as output. If specified the row is being used
+  as the output. Else defaults to column.
+
+- pull-up-enabled: An optional property indicating the Keypad scan mode.
+  If specified implies the keypad scan pull-up has been enabled.
+
+- autorepeat: Boolean, Enable auto repeat feature of Linux input
+	  subsystem (optional).
+
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+
+Example:
+#include "dt-bindings/input/input.h"
+
+/ {
+	keypad: keypad@180ac000 {
+		/* Required SoC specific properties */
+		compatible = "brcm,bcm-keypad";
+
+		/* Required Board specific properties */
+		keypad,num-rows = <5>;
+		keypad,num-columns = <5>;
+
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
+		MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
+		MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
+		MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
+		MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
+		MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
+		MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
+		MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
+		MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
+		MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
+		MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
+		MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
+		MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
+		MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
+		MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
+		MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
+		MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
+		MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
+		MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
+		MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
+		MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
+		MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
+		MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
+		>;
+
+		/* Optional board specific properties */
+		col-debounce-filter-period = <5>;
+		row-output-enabled;
+		pull-up-enabled;
+
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
new file mode 100644
index 0000000000..3eed8819d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
@@ -0,0 +1,27 @@
+* Cirrus Logic CLPS711X matrix keypad device tree bindings
+
+Required Properties:
+- compatible:    Shall contain "cirrus,ep7209-keypad".
+- row-gpios:     List of GPIOs used as row lines.
+- poll-interval: Poll interval time in milliseconds.
+- linux,keymap:  The definition can be found at
+                 bindings/input/matrix-keymap.txt.
+
+Optional Properties:
+- autorepeat:    Enable autorepeat feature.
+
+Example:
+	keypad {
+		compatible = "cirrus,ep7312-keypad", "cirrus,ep7209-keypad";
+		autorepeat;
+		poll-interval = <120>;
+		row-gpios = <&porta 0 0>,
+			    <&porta 1 0>;
+
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_UP)
+			MATRIX_KEY(0, 1, KEY_DOWN)
+			MATRIX_KEY(1, 0, KEY_LEFT)
+			MATRIX_KEY(1, 1, KEY_RIGHT)
+		>;
+	};
diff --git a/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
new file mode 100644
index 0000000000..0dd0076daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
@@ -0,0 +1,20 @@
+Motorola CPCAP on key
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "motorola,cpcap-pwrbutton"
+- interrupts: irq specifier for CPCAP's ON IRQ
+
+Example:
+
+&cpcap {
+	cpcap_pwrbutton: pwrbutton {
+		compatible = "motorola,cpcap-pwrbutton";
+		interrupts = <23 IRQ_TYPE_NONE>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
new file mode 100644
index 0000000000..29515151ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: cypress,cyapa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    description: 3.3V power
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        trackpad@67 {
+            reg = <0x67>;
+            compatible = "cypress,cyapa";
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpx1>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml
new file mode 100644
index 0000000000..52dca8b640
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,tm2-touchkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung TM2 touch key controller
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Touch key controllers similar to the TM2 can be found in a wide range of
+  Samsung devices. They are implemented using many different MCUs, but use
+  a similar I2C protocol.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cypress,tm2-touchkey
+      - cypress,midas-touchkey
+      - cypress,aries-touchkey
+      - coreriver,tc360-touchkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Optional regulator for LED voltage, 3.3V.
+
+  vcc-supply:
+    description: Optional regulator for MCU, 1.8V-3.3V (depending on MCU).
+
+  vddio-supply:
+    description: |
+      Optional regulator that provides digital I/O voltage,
+      e.g. for pulling up the interrupt line or the I2C pins.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@20 {
+            compatible = "cypress,tm2-touchkey";
+            reg = <0x20>;
+            interrupt-parent = <&gpa3>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            vcc-supply = <&ldo32_reg>;
+            vdd-supply = <&ldo33_reg>;
+            linux,keycodes = <KEY_MENU KEY_BACK>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/cypress-sf.yaml b/Documentation/devicetree/bindings/input/cypress-sf.yaml
new file mode 100644
index 0000000000..c0b0514662
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress-sf.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress-sf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress StreetFighter touchkey controller
+
+maintainers:
+  - Yassine Oudjana <y.oudjana@protonmail.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: cypress,sf3155
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: Regulator for AVDD analog voltage
+
+  vdd-supply:
+    description: Regulator for VDD digital voltage
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@28 {
+                compatible = "cypress,sf3155";
+                reg = <0x28>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+                avdd-supply = <&vreg_l6a_1p8>;
+                vdd-supply = <&vdd_3v2_tp>;
+                linux,keycodes = <KEY_BACK KEY_MENU>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
new file mode 100644
index 0000000000..e5eef59a93
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt
@@ -0,0 +1,47 @@
+* Dialog DA9061/62/63 OnKey Module
+
+This module is part of the DA9061/DA9062/DA9063. For more details about entire
+DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+This module provides the KEY_POWER event.
+
+Required properties:
+
+- compatible: should be one of the following valid compatible string lines:
+	"dlg,da9061-onkey", "dlg,da9062-onkey"
+	"dlg,da9062-onkey"
+	"dlg,da9063-onkey"
+
+Optional properties:
+
+- dlg,disable-key-power : Disable power-down using a long key-press. If this
+    entry exists the OnKey driver will remove support for the KEY_POWER key
+    press when triggered using a long press of the OnKey.
+
+Example: DA9063
+
+	pmic0: da9063@58 {
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			dlg,disable-key-power;
+		};
+	};
+
+Example: DA9062
+
+	pmic0: da9062@58 {
+		onkey {
+			compatible = "dlg,da9062-onkey";
+			dlg,disable-key-power;
+		};
+	};
+
+Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
+
+	pmic0: da9061@58 {
+		onkey {
+			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+			dlg,disable-key-power;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt
new file mode 100644
index 0000000000..96ee5d50e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlg,da7280.txt
@@ -0,0 +1,108 @@
+Dialog Semiconductor DA7280 Haptics bindings
+
+Required properties:
+- compatible: Should be "dlg,da7280".
+- reg: Specifies the I2C slave address.
+
+- interrupt-parent : Specifies the phandle of the interrupt controller to
+  which the IRQs from DA7280 are delivered to.
+
+- dlg,actuator-type: Set Actuator type. it should be one of:
+  "LRA" - Linear Resonance Actuator type.
+  "ERM-bar" - Bar type Eccentric Rotating Mass.
+  "ERM-coin" - Coin type Eccentric Rotating Mass.
+
+- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT.
+  Possible values:
+	1 - Direct register override(DRO) mode triggered by i2c(default),
+	2 - PWM data source mode controlled by PWM duty,
+- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC.
+  Possible values:
+	1 - Register triggered waveform memory(RTWM) mode, the pattern
+	    assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP,
+	2 - Edge triggered waveform memory(ETWM) mode, external GPI(N)
+	    control are required to enable/disable and it needs to keep
+	    device enabled by sending magnitude (X > 0),
+	    the pattern is assigned to the GPI(N)_SEQUENCE_ID below.
+	The default value is 1 for both of the operation modes.
+	For more details, please see the datasheet.
+
+- dlg,nom-microvolt: Nominal actuator voltage rating.
+  Valid values: 0 - 6000000.
+- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating.
+  Valid values: 0 - 6000000.
+- dlg,imax-microamp: Actuator max current rating.
+  Valid values: 0 - 252000.
+  Default: 130000.
+- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms.
+  Valid values: 0 - 1500000000.
+
+Optional properties:
+- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+  PWM properties should be named "pwms". And number of cell is different
+  for each pwm device.
+  (See Documentation/devicetree/bindings/pwm/pwm.txt
+   for further information relating to pwm properties)
+
+- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip)
+  to play back when RTWM-MODE is enabled.
+  Valid range: 0 - 15.
+- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence
+  pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated.
+  Valid range: 0 - 15.
+- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play
+  when gpi0 is triggered, 'N' must be 0 - 2.
+  Valid range: 0 - 15.
+- dlg,gpiN-mode: the pattern mode which can select either
+  "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2.
+- dlg,gpiN-polarity: gpiN polarity which can be chosen among
+  "Rising-edge", "Falling-edge" and "Both-edge",
+  'N' must be 0 - 2
+  Haptic will work by this edge option in case of ETWM mode.
+
+- dlg,resonant-freq-hz: use in case of LRA.
+  the frequency range: 50 - 300.
+  Default: 205.
+
+- dlg,bemf-sens-enable: Enable for internal loop computations.
+- dlg,freq-track-enable: Enable for resonant frequency tracking.
+- dlg,acc-enable: Enable for active acceleration.
+- dlg,rapid-stop-enable: Enable for rapid stop.
+- dlg,amp-pid-enable: Enable for the amplitude PID.
+- dlg,mem-array: Customized waveform memory(patterns) data downloaded to
+  the device during initialization. This is an array of 100 values(u8).
+
+For further information, see device datasheet.
+
+======
+
+Example:
+
+	haptics: da7280-haptics@4a {
+		compatible = "dlg,da7280";
+		reg = <0x4a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		dlg,actuator-type = "LRA";
+		dlg,dlg,const-op-mode = <1>;
+		dlg,dlg,periodic-op-mode = <1>;
+		dlg,nom-microvolt = <2000000>;
+		dlg,abs-max-microvolt = <2000000>;
+		dlg,imax-microamp = <170000>;
+		dlg,resonant-freq-hz = <180>;
+		dlg,impd-micro-ohms = <10500000>;
+		dlg,freq-track-enable;
+		dlg,rapid-stop-enable;
+		dlg,mem-array = <
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		>;
+	};
diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
new file mode 100644
index 0000000000..10dec1c57a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
@@ -0,0 +1,21 @@
+* D-Link DIR-685 Touchkeys
+
+This is a I2C one-off touchkey controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchkeys"
+- reg: the I2C address of the touchkeys
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchkeys@26 {
+	compatible = "dlink,dir685-touchkeys";
+	reg = <0x26>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/input/e3x0-button.txt b/Documentation/devicetree/bindings/input/e3x0-button.txt
new file mode 100644
index 0000000000..907b195f2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/e3x0-button.txt
@@ -0,0 +1,23 @@
+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+  - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupts: should be one of the following
+  - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+  - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+	button {
+		compatible = "ettus,e3x0-button";
+		interrupt-parent = <&intc>;
+		interrupts = <0 30 1>, <0 31 1>;
+		interrupt-names = "press", "release";
+	}
diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
new file mode 100644
index 0000000000..24dc2d6961
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elantech I2C Touchpad
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: elan,ekth3000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchpad can be used as a wakeup source
+
+  vcc-supply:
+    description: a phandle for the regulator supplying 3.3V power
+
+  elan,trackpoint:
+    type: boolean
+    description: touchpad can support a trackpoint
+
+  elan,clickpad:
+    type: boolean
+    description: touchpad is a clickpad (the entire surface is a button)
+
+  elan,middle-button:
+    type: boolean
+    description: touchpad has a physical middle button
+
+  elan,x_traces:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of antennas on the x axis
+
+  elan,y_traces:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of antennas on the y axis
+
+  touchscreen-size-x: true
+
+  touchscreen-size-y: true
+
+  touchscreen-x-mm: true
+
+  touchscreen-y-mm: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchpad@15 {
+            compatible = "elan,ekth3000";
+            reg = <0x15>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 0000000000..3e2d216c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTH6915 touchscreen controller
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Elan eKTH6915 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: elan,ekth6915
+
+  reg:
+    const: 0x10
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description:
+      The IO supply to the touchscreen. Need not be specified if this is the
+      same as the 3.3V supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@10 {
+        compatible = "elan,ekth6915";
+        reg = <0x10>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
new file mode 100644
index 0000000000..5139af287d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,mpr121-touchkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPR121 capacitive touch sensor controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+description: |
+  The MPR121 supports up to 12 completely independent electrodes/capacitance
+  sensing inputs in which 8 are multifunctional for LED driving and GPIO.
+  https://www.nxp.com/docs/en/data-sheet/MPR121.pdf
+
+allOf:
+  - $ref: input.yaml#
+
+anyOf:
+  - required: [ interrupts ]
+  - required: [ poll-interval ]
+
+properties:
+  compatible:
+    const: fsl,mpr121-touchkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 12
+
+  wakeup-source:
+    description: Use any event on keypad as wakeup event.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - linux,keycodes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example with interrupts
+    #include "dt-bindings/input/input.h"
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@5a {
+            compatible = "fsl,mpr121-touchkey";
+            reg = <0x5a>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 2>;
+            autorepeat;
+            vdd-supply = <&ldo4_reg>;
+            linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+                             <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
+                             <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+        };
+    };
+
+  - |
+    // Example with polling
+    #include "dt-bindings/input/input.h"
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@5a {
+            compatible = "fsl,mpr121-touchkey";
+            reg = <0x5a>;
+            poll-interval = <20>;
+            autorepeat;
+            vdd-supply = <&ldo4_reg>;
+            linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+                             <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
+                             <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 0000000000..e5a3c355ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU Key Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-key
+      - const: fsl,imx-sc-key
+
+  linux,keycodes:
+    maxItems: 1
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+
+    keys {
+        compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+        linux,keycodes = <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
new file mode 100644
index 0000000000..358cb8275b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7375P touchscreen
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Goodix GT7375P touchscreen.
+  This touchscreen uses the i2c-hid protocol but has some non-standard
+  power sequencing required.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: goodix,gt7375p
+      - items:
+          - const: goodix,gt7986u
+          - const: goodix,gt7375p
+
+  reg:
+    enum:
+      - 0x5d
+      - 0x14
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    true
+
+  vdd-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  mainboard-vddio-supply:
+    description:
+      The supply on the main board needed to power up IO signals going
+      to the touchscreen. This supply need not go to the touchscreen
+      itself as long as it allows the main board to make signals compatible
+      with what the touchscreen is expecting for its IO rails.
+
+  goodix,no-reset-during-suspend:
+    description:
+      Set this to true to enforce the driver to not assert the reset GPIO
+      during suspend.
+      Due to potential touchscreen hardware flaw, back-powering could happen in
+      suspend if the power supply is on and with active-low reset GPIO asserted.
+      This property is used to avoid the back-powering issue.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@5d {
+        compatible = "goodix,gt7375p";
+        reg = <0x5d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vdd-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
new file mode 100644
index 0000000000..fefaaf46a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/google,cros-ec-keyb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC Keyboard
+
+maintainers:
+  - Simon Glass <sjg@chromium.org>
+  - Benson Leung <bleung@chromium.org>
+
+description: |
+  Google's ChromeOS EC Keyboard is a simple matrix keyboard
+  implemented on a separate EC (Embedded Controller) device. It provides
+  a message for reading key scans from the EC. These are then converted
+  into keycodes for processing by the kernel. This device also supports
+  switches/buttons like power and volume buttons.
+
+properties:
+  compatible:
+    oneOf:
+      - description: ChromeOS EC with only buttons/switches
+        const: google,cros-ec-keyb-switches
+      - description: ChromeOS EC with keyboard and possibly buttons/switches
+        const: google,cros-ec-keyb
+
+  google,needs-ghost-filter:
+    description:
+      Enable a ghost filter for the matrix keyboard. This is recommended
+      if the EC does not have its own logic or hardware for this.
+    type: boolean
+
+  function-row-physmap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 15
+    description: |
+      An ordered u32 array describing the rows/columns (in the scan matrix)
+      of top row keys from physical left (KEY_F1) to right. Each entry
+      encodes the row/column as:
+      (((row) & 0xFF) << 24) | (((column) & 0xFF) << 16)
+      where the lower 16 bits are reserved. This property is specified only
+      when the keyboard has a custom design for the top row keys.
+
+dependencies:
+  function-row-physmap: [ 'linux,keymap' ]
+  google,needs-ghost-filter: [ 'linux,keymap' ]
+
+required:
+  - compatible
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-keyb
+then:
+  $ref: /schemas/input/matrix-keymap.yaml#
+  required:
+    - keypad,num-rows
+    - keypad,num-columns
+    - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb";
+        keypad,num-rows = <8>;
+        keypad,num-columns = <13>;
+        google,needs-ghost-filter;
+        function-row-physmap = <
+            MATRIX_KEY(0x00, 0x02, 0)   /* T1 */
+            MATRIX_KEY(0x03, 0x02, 0)   /* T2 */
+            MATRIX_KEY(0x02, 0x02, 0)   /* T3 */
+            MATRIX_KEY(0x01, 0x02, 0)   /* T4 */
+            MATRIX_KEY(0x03, 0x04, 0)   /* T5 */
+            MATRIX_KEY(0x02, 0x04, 0)   /* T6 */
+            MATRIX_KEY(0x01, 0x04, 0)   /* T7 */
+            MATRIX_KEY(0x02, 0x09, 0)   /* T8 */
+            MATRIX_KEY(0x01, 0x09, 0)   /* T9 */
+            MATRIX_KEY(0x00, 0x04, 0)   /* T10 */
+        >;
+        /*
+         * Keymap entries take the form of 0xRRCCKKKK where
+         * RR=Row CC=Column KKKK=Key Code
+         * The values below are for a US keyboard layout and
+         * are taken from the Linux driver. Note that the
+         * 102ND key is not used for US keyboards.
+         */
+        linux,keymap = <
+            /* CAPSLCK F1         B          F10     */
+            0x0001003a 0x0002003b 0x00030030 0x00040044
+            /* N       =          R_ALT      ESC     */
+            0x00060031 0x0008000d 0x000a0064 0x01010001
+            /* F4      G          F7         H       */
+            0x0102003e 0x01030022 0x01040041 0x01060023
+            /* '       F9         BKSPACE    L_CTRL  */
+            0x01080028 0x01090043 0x010b000e 0x0200001d
+            /* TAB     F3         T          F6      */
+            0x0201000f 0x0202003d 0x02030014 0x02040040
+            /* ]       Y          102ND      [       */
+            0x0205001b 0x02060015 0x02070056 0x0208001a
+            /* F8      GRAVE      F2         5       */
+            0x02090042 0x03010029 0x0302003c 0x03030006
+            /* F5      6          -          \       */
+            0x0304003f 0x03060007 0x0308000c 0x030b002b
+            /* R_CTRL  A          D          F       */
+            0x04000061 0x0401001e 0x04020020 0x04030021
+            /* S       K          J          ;       */
+            0x0404001f 0x04050025 0x04060024 0x04080027
+            /* L       ENTER      Z          C       */
+            0x04090026 0x040b001c 0x0501002c 0x0502002e
+            /* V       X          ,          M       */
+            0x0503002f 0x0504002d 0x05050033 0x05060032
+            /* L_SHIFT /          .          SPACE   */
+            0x0507002a 0x05080035 0x05090034 0x050B0039
+            /* 1       3          4          2       */
+            0x06010002 0x06020004 0x06030005 0x06040003
+            /* 8       7          0          9       */
+            0x06050009 0x06060008 0x0608000b 0x0609000a
+            /* L_ALT   DOWN       RIGHT      Q       */
+            0x060a0038 0x060b006c 0x060c006a 0x07010010
+            /* E       R          W          I       */
+            0x07020012 0x07030013 0x07040011 0x07050017
+            /* U       R_SHIFT    P          O       */
+            0x07060016 0x07070036 0x07080019 0x07090018
+            /* UP      LEFT    */
+            0x070b0067 0x070c0069>;
+    };
+  - |
+    /* No matrix keyboard, just buttons/switches */
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb-switches";
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.yaml b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
new file mode 100644
index 0000000000..290372add3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled beeper
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+properties:
+  compatible:
+    const: gpio-beeper
+
+  gpios:
+    maxItems: 1
+    description:
+      GPIO that drives the beeper.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "gpio-beeper";
+        gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt
new file mode 100644
index 0000000000..14a77fb96c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt
@@ -0,0 +1,23 @@
+* GPIO Decoder DT bindings
+
+Required Properties:
+- compatible: should be "gpio-decoder"
+- gpios: a spec of gpios (at least two) to be decoded to a number with
+  first entry representing the MSB.
+
+Optional Properties:
+- decoder-max-value: Maximum possible value that can be reported by
+  the gpios.
+- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
+  Defaults to 0 (ABS_X).
+
+Example:
+	gpio-decoder0 {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
new file mode 100644
index 0000000000..159cd9d9fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached keys
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - gpio-keys
+      - gpio-keys-polled
+
+  autorepeat: true
+
+  label:
+    description: Name of entire device
+
+  poll-interval: true
+
+patternProperties:
+  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+    $ref: input.yaml#
+
+    properties:
+      gpios:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      label:
+        description: Descriptive name of the key.
+
+      linux,code:
+        description: Key / Axis code to emit.
+
+      linux,input-type:
+        default: 1  # EV_KEY
+
+      linux,input-value:
+        description: |
+          If linux,input-type is EV_ABS or EV_REL then this
+          value is sent for events this button generates when pressed.
+          EV_ABS/EV_REL axis will generate an event with a value of 0
+          when all buttons with linux,input-type == type and
+          linux,code == axis are released. This value is interpreted
+          as a signed 32 bit value, e.g. to make a button generate a
+          value of -1 use:
+
+          linux,input-value = <0xffffffff>; /* -1 */
+
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      debounce-interval:
+        description:
+          Debouncing interval time in milliseconds. If not specified defaults to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+        default: 5
+
+      wakeup-source:
+        description: Button can wake-up the system.
+
+      wakeup-event-action:
+        description: |
+          Specifies whether the key should wake the system when asserted, when
+          deasserted, or both. This property is only valid for keys that wake up the
+          system (e.g., when the "wakeup-source" property is also provided).
+
+          Supported values are defined in linux-event-codes.h:
+
+            EV_ACT_ANY        - both asserted and deasserted
+            EV_ACT_ASSERTED   - asserted
+            EV_ACT_DEASSERTED - deasserted
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+      linux,can-disable:
+        description:
+          Indicates that button is connected to dedicated (not shared) interrupt
+          which can be disabled to suppress events from the button.
+        type: boolean
+
+    required:
+      - linux,code
+
+    anyOf:
+      - required:
+          - interrupts
+      - required:
+          - interrupts-extended
+      - required:
+          - gpios
+
+    dependencies:
+      wakeup-event-action: [ wakeup-source ]
+      linux,input-value: [ gpios ]
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          const: gpio-keys-polled
+    then:
+      required:
+        - poll-interval
+    else:
+      properties:
+        poll-interval: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio-keys {
+        compatible = "gpio-keys";
+        autorepeat;
+
+        key-up {
+            label = "GPIO Key UP";
+            linux,code = <103>;
+            gpios = <&gpio1 0 1>;
+        };
+
+        key-down {
+            label = "GPIO Key DOWN";
+            linux,code = <108>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
new file mode 100644
index 0000000000..570dc10f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -0,0 +1,49 @@
+* GPIO driven matrix keypad device tree bindings
+
+GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+The matrix keypad supports multiple row and column lines, a key can be
+placed at each intersection of a unique row and a unique column. The matrix
+keypad can sense a key-press and key-release by means of GPIO lines and
+report the event using GPIO interrupts to the cpu.
+
+Required Properties:
+- compatible:		Should be "gpio-matrix-keypad"
+- row-gpios:		List of gpios used as row lines. The gpio specifier
+			for this property depends on the gpio controller to
+			which these row lines are connected.
+- col-gpios:		List of gpios used as column lines. The gpio specifier
+			for this property depends on the gpio controller to
+			which these column lines are connected.
+- linux,keymap:		The definition can be found at
+			bindings/input/matrix-keymap.txt
+
+Optional Properties:
+- linux,no-autorepeat:	do no enable autorepeat feature.
+- wakeup-source:	use any event on keypad as wakeup event.
+			(Legacy property supported: "linux,wakeup")
+- debounce-delay-ms:	debounce interval in milliseconds
+- col-scan-delay-us:	delay, measured in microseconds, that is needed
+			before we can scan keypad after activating column gpio
+- drive-inactive-cols:	drive inactive columns during scan,
+			default is to turn inactive columns into inputs.
+
+Example:
+	matrix-keypad {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0
+			     &gpio2 26 0
+			     &gpio2 27 0>;
+
+		col-gpios = <&gpio2 21 0
+			     &gpio2 22 0>;
+
+		linux,keymap = <0x0000008B
+				0x0100009E
+				0x02000069
+				0x0001006A
+				0x0101001C
+				0x0201006C>;
+	};
diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt
new file mode 100644
index 0000000000..519510a11a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-mouse.txt
@@ -0,0 +1,32 @@
+Device-Tree bindings for GPIO attached mice
+
+This simply uses standard GPIO handles to define a simple mouse connected
+to 5-7 GPIO lines.
+
+Required properties:
+	- compatible: must be "gpio-mouse"
+	- scan-interval-ms: The scanning interval in milliseconds
+	- up-gpios: GPIO line phandle to the line indicating "up"
+	- down-gpios: GPIO line phandle to the line indicating "down"
+	- left-gpios: GPIO line phandle to the line indicating "left"
+	- right-gpios: GPIO line phandle to the line indicating "right"
+
+Optional properties:
+	- button-left-gpios: GPIO line handle to the left mouse button
+	- button-middle-gpios: GPIO line handle to the middle mouse button
+	- button-right-gpios: GPIO line handle to the right mouse button
+Example:
+
+#include <dt-bindings/gpio/gpio.h>
+
+gpio-mouse {
+	compatible = "gpio-mouse";
+	scan-interval-ms = <50>;
+	up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+	down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+	left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+	right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+	button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+	button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+	button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
new file mode 100644
index 0000000000..2384465eaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO vibrator
+
+maintainers:
+  - Luca Weiss <luca@z3ntu.xyz>
+
+description: |+
+  Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO.
+
+properties:
+  compatible:
+    const: gpio-vibrator
+
+  enable-gpios:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator that provides power
+
+required:
+  - compatible
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    vibrator {
+        compatible = "gpio-vibrator";
+        enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+        vcc-supply = <&pm8941_l18>;
+    };
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 0000000000..138caad96a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+  - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  panel: true
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hid@2c {
+            compatible = "hid-over-i2c";
+            reg = <0x2c>;
+            hid-descr-addr = <0x0020>;
+            interrupts = <3 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 0000000000..29a1879e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The IBM Operation Panel provides a simple interface to control the connected
+  server. It has a display and three buttons: two directional arrows and one
+  'Enter' button.
+
+properties:
+  compatible:
+    const: ibm,op-panel
+
+  reg:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ibm-op-panel@62 {
+            compatible = "ibm,op-panel";
+            reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
new file mode 100644
index 0000000000..c5d9e0e919
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ili9882t touchscreen controller
+
+maintainers:
+  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+description:
+  Supports the Ilitek ili9882t touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: ilitek,ili9882t
+
+  reg:
+    const: 0x41
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset GPIO.
+
+  vccio-supply:
+    description: The 1.8V supply to the touchscreen.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - panel
+  - vccio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen: touchscreen@41 {
+        compatible = "ilitek,ili9882t";
+        reg = <0x41>;
+
+        interrupt-parent = <&pio>;
+        interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+        panel = <&panel>;
+        reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+        vccio-supply = <&mt6366_vio18_reg>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
new file mode 100644
index 0000000000..b110eb1f33
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/imx-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Keypad Port(KPP)
+
+maintainers:
+  - Liu Ying <gnuiyl@gmail.com>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description: |
+  The KPP is designed to interface with a keypad matrix with 2-point contact
+  or 3-point contact keys. The KPP is designed to simplify the software task
+  of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+  and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-kpp
+      - items:
+          - enum:
+              - fsl,imx25-kpp
+              - fsl,imx27-kpp
+              - fsl,imx31-kpp
+              - fsl,imx35-kpp
+              - fsl,imx51-kpp
+              - fsl,imx53-kpp
+              - fsl,imx50-kpp
+              - fsl,imx6q-kpp
+              - fsl,imx6sx-kpp
+              - fsl,imx6sl-kpp
+              - fsl,imx6sll-kpp
+              - fsl,imx6ul-kpp
+              - fsl,imx7d-kpp
+          - const: fsl,imx21-kpp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    keypad@73f94000 {
+        compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
+        reg = <0x73f94000 0x4000>;
+        interrupts = <60>;
+        clocks = <&clks 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_kpp_1>;
+        linux,keymap = <0x00000067	/* KEY_UP */
+                        0x0001006c	/* KEY_DOWN */
+                        0x00020072	/* KEY_VOLUMEDOWN */
+                        0x00030066	/* KEY_HOME */
+                        0x0100006a	/* KEY_RIGHT */
+                        0x01010069	/* KEY_LEFT */
+                        0x0102001c	/* KEY_ENTER */
+                        0x01030073	/* KEY_VOLUMEUP */
+                        0x02000040	/* KEY_F6 */
+                        0x02010042	/* KEY_F8 */
+                        0x02020043	/* KEY_F9 */
+                        0x02030044	/* KEY_F10 */
+                        0x0300003b	/* KEY_F1 */
+                        0x0301003c	/* KEY_F2 */
+                        0x0302003d	/* KEY_F3 */
+                        0x03030074>;	/* KEY_POWER */
+    };
diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt
new file mode 100644
index 0000000000..1ca6cc5ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/input-reset.txt
@@ -0,0 +1,33 @@
+Input: sysrq reset sequence
+
+A simple binding to represent a set of keys as described in
+include/uapi/linux/input.h. This is to communicate a sequence of keys to the
+sysrq driver. Upon holding the keys for a specified amount of time (if
+specified) the system is sync'ed and reset.
+
+Key sequences are global to the system but all the keys in a set must be coming
+from the same input device.
+
+The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
+a set of keys.
+
+Required property:
+keyset: array of Linux keycodes, one keycode per cell.
+
+Optional property:
+timeout-ms: duration keys must be pressed together in milliseconds before
+generating a sysrq. If omitted the system is rebooted immediately when a valid
+sequence has been recognized.
+
+Example:
+
+ chosen {
+                linux,sysrq-reset-seq {
+                        keyset = <0x03
+                                  0x04
+                                  0x0a>;
+                        timeout-ms = <3000>;
+                };
+         };
+
+Would represent KEY_2, KEY_3 and KEY_9.
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
new file mode 100644
index 0000000000..94f7942189
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/input.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Input Devices Common Properties
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+  autorepeat:
+    description: Enable autorepeat when key is pressed and held down.
+    type: boolean
+
+  linux,keycodes:
+    description:
+      Specifies an array of numeric keycode values to be used for reporting
+      button presses.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minimum: 0
+      maximum: 0x2ff
+
+  linux,code:
+    description:
+      Specifies a single numeric keycode value to be used for reporting
+      button/switch events. Specify KEY_RESERVED (0) to opt out of event
+      reporting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x2ff
+
+  linux,input-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1   # EV_KEY
+      - 2   # EV_REL
+      - 3   # EV_ABS
+      - 5   # EV_SW
+    description:
+      Specifies whether the event is to be interpreted as a key, relative,
+      absolute, or switch.
+
+  poll-interval:
+    description: Poll interval time in milliseconds.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  power-off-time-sec:
+    description:
+      Duration in seconds which the key should be kept pressed for device to
+      power off automatically. Device with key pressed shutdown feature can
+      specify this property.
+
+  reset-time-sec:
+    description:
+      Duration in seconds which the key should be kept pressed for device to
+      reset automatically. Device with key pressed reset feature can specify
+      this property.
+
+dependencies:
+  linux,input-type: [ "linux,code" ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
new file mode 100644
index 0000000000..3c430d3859
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -0,0 +1,552 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs269a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS269A Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS269A is an 8-channel capacitive touch controller that features
+  additional Hall-effect and inductive sensing capabilities.
+
+  Link to datasheet: https://www.azoteq.com/
+
+properties:
+  compatible:
+    const: azoteq,iqs269a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  azoteq,hall-enable:
+    type: boolean
+    description:
+      Enables Hall-effect sensing on channels 6 and 7. In this case, keycodes
+      assigned to channel 6 are ignored and keycodes assigned to channel 7 are
+      interpreted as switch codes. Refer to the datasheet for requirements im-
+      posed on channels 6 and 7 by Hall-effect sensing.
+
+  azoteq,suspend-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the power mode during suspend as follows:
+      0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+      1: Low power (all sensing at a reduced reporting rate)
+      2: Ultra-low power (channel 0 proximity sensing)
+      3: Halt (no sensing)
+
+  azoteq,clk-div:
+    type: boolean
+    description: Divides the device's core clock by a factor of 4.
+
+  azoteq,ulp-update:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 3
+    description: Specifies the ultra-low-power mode update rate.
+
+  azoteq,reseed-offset:
+    type: boolean
+    description:
+      Applies an 8-count offset to all long-term averages upon either ATI or
+      reseed events.
+
+  azoteq,filt-str-lp-lta:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the long-term average filter strength during low-power mode.
+
+  azoteq,filt-str-lp-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the raw count filter strength during low-power mode.
+
+  azoteq,filt-str-np-lta:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the long-term average filter strength during normal-power mode.
+
+  azoteq,filt-str-np-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Specifies the raw count filter strength during normal-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 255
+    default: 16
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 255
+    default: 160
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,rate-ulp-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 160
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+  azoteq,timeout-pwr-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 2560
+    description:
+      Specifies the length of time (in ms) to wait for an event during normal-
+      power mode before transitioning to low-power mode.
+
+  azoteq,timeout-lta-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 32768
+    description:
+      Specifies the length of time (in ms) to wait before resetting the long-
+      term average of all channels. Specify the maximum timeout to disable it
+      altogether.
+
+  azoteq,ati-band-disable:
+    type: boolean
+    description: Disables the ATI band check.
+
+  azoteq,ati-lp-only:
+    type: boolean
+    description: Limits automatic ATI to low-power mode.
+
+  azoteq,ati-band-tighten:
+    type: boolean
+    description: Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+  azoteq,filt-disable:
+    type: boolean
+    description: Disables all raw count filtering.
+
+  azoteq,gpio3-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Selects the channel for which the GPIO3 pin represents touch state.
+
+  azoteq,dual-direction:
+    type: boolean
+    description:
+      Specifies that long-term averages are to freeze in the presence of either
+      increasing or decreasing counts, thereby permitting events to be reported
+      in either direction.
+
+  azoteq,tx-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the inductive sensing excitation frequency as follows (paren-
+      thesized numbers represent the frequency if 'azoteq,clk-div' is present):
+      0: 16 MHz (4 MHz)
+      1: 8 MHz (2 MHz)
+      2: 4 MHz (1 MHz)
+      3: 2 MHz (500 kHz)
+
+  azoteq,global-cap-increase:
+    type: boolean
+    description: Increases the global capacitance adder from 0.5 pF to 1.5 pF.
+
+  azoteq,reseed-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the event(s) that prompt the device to reseed (i.e. reset the
+      long-term average) of an associated channel as follows:
+      0: None
+      1: Proximity
+      2: Proximity or touch
+      3: Proximity, touch or deep touch
+
+  azoteq,tracking-enable:
+    type: boolean
+    description:
+      Enables all associated channels to track their respective reference
+      channels.
+
+  azoteq,filt-str-slider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 1
+    description: Specifies the slider coordinate filter strength.
+
+patternProperties:
+  "^channel@[0-7]$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+        description: Index of the channel.
+
+      azoteq,reseed-disable:
+        type: boolean
+        description:
+          Prevents the channel from being reseeded if the long-term average
+          timeout (defined in 'azoteq,timeout-lta') expires.
+
+      azoteq,blocking-enable:
+        type: boolean
+        description: Specifies that the channel is a blocking channel.
+
+      azoteq,slider0-select:
+        type: boolean
+        description: Specifies that the channel participates in slider 0.
+
+      azoteq,slider1-select:
+        type: boolean
+        description: Specifies that the channel participates in slider 1.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the CRX pin(s) associated with the channel. By default, only
+          the CRX pin corresponding to the channel's index is enabled (e.g. CRX0
+          for channel 0).
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        default: [0, 1, 2, 3, 4, 5, 6, 7]
+        description: Specifies the TX pin(s) associated with the channel.
+
+      azoteq,meas-cap-decrease:
+        type: boolean
+        description:
+          Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRX pins instead of grounding them.
+
+      azoteq,local-cap-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+        description: |
+          Specifies the capacitance to be added to the channel as follows:
+          0: None
+          1: Global adder (based on 'azoteq,global-cap-increase')
+          2: Global adder + 0.5 pF
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity, touch and
+          deep-touch events relative to their respective thresholds.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 2
+        description: |
+          Specifies the bias current applied during projected-capacitance
+          sensing as follows:
+          0: 2.5 uA
+          1: 5 uA
+          2: 10 uA
+          3: 20 uA
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 9, 14, 15]
+        default: 0
+        description: |
+          Specifies the channel's sensing mode as follows:
+          0:  Self capacitance
+          1:  Projected capacitance
+          9:  Self or mutual inductance
+          14: Hall effect
+          15: Temperature
+
+      azoteq,sense-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Specifies the channel's sensing frequency as follows (parenthesized
+          numbers represent the frequency if 'azoteq,clk-div' is present):
+          0: 4 MHz (1 MHz)
+          1: 2 MHz (500 kHz)
+          2: 1 MHz (250 kHz)
+          3: 500 kHz (125 kHz)
+
+      azoteq,static-enable:
+        type: boolean
+        description: Enables the static front-end for the channel.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 3
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Semi-partial
+          2: Partial
+          3: Full
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [75, 100, 150, 200]
+        default: 100
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        default: 512
+        description: Specifies the channel's ATI target.
+
+      azoteq,assoc-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the associated channels for which the channel serves as a
+          reference channel. By default, no channels are selected.
+
+      azoteq,assoc-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
+        description:
+          Specifies the channel's impact weight if it acts as an associated
+          channel (0 = 0% impact, 255 = 200% impact).
+
+    patternProperties:
+      "^event-prox(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity event reported by the channel in response to
+          a decrease in counts. Node names suffixed with '-alt' instead corre-
+          spond to an increase in counts.
+
+          By default, the long-term average tracks an increase in counts such
+          that only events corresponding to a decrease in counts are reported
+          (refer to the datasheet for more information).
+
+          Specify 'azoteq,dual-direction' to freeze the long-term average when
+          the counts increase or decrease such that events of either direction
+          can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+          vert the polarity of the states reported by the channel.
+
+          Complementary events (e.g. event-touch and event-touch-alt) can both
+          be present and specify different key or switch codes, but not differ-
+          ent thresholds or hysteresis (if applicable).
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 10
+            description: Specifies the threshold for the event.
+
+          linux,code: true
+
+        additionalProperties: false
+
+      "^event-touch(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description: Represents a touch event reported by the channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 8
+            description: Specifies the threshold for the event.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 4
+            description: Specifies the hysteresis for the event.
+
+          linux,code: true
+
+        additionalProperties: false
+
+      "^event-deep(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description: Represents a deep-touch event reported by the channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 26
+            description: Specifies the threshold for the event.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            default: 0
+            description: Specifies the hysteresis for the event.
+
+          linux,code: true
+
+        additionalProperties: false
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touch@44 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    compatible = "azoteq,iqs269a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    azoteq,hall-enable;
+                    azoteq,suspend-mode = <2>;
+
+                    channel@0 {
+                            reg = <0x0>;
+
+                            event-prox {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel@1 {
+                            reg = <0x1>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@2 {
+                            reg = <0x2>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@3 {
+                            reg = <0x3>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@4 {
+                            reg = <0x4>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@5 {
+                            reg = <0x5>;
+                            azoteq,slider0-select;
+                    };
+
+                    channel@6 {
+                            reg = <0x6>;
+                            azoteq,invert-enable;
+                            azoteq,static-enable;
+                            azoteq,reseed-disable;
+                            azoteq,rx-enable = <0>;
+                            azoteq,sense-freq = <0x0>;
+                            azoteq,sense-mode = <0xE>;
+                            azoteq,ati-mode = <0x0>;
+                            azoteq,ati-base = <200>;
+                            azoteq,ati-target = <320>;
+                    };
+
+                    channel@7 {
+                            reg = <0x7>;
+                            azoteq,invert-enable;
+                            azoteq,static-enable;
+                            azoteq,reseed-disable;
+                            azoteq,rx-enable = <0>, <6>;
+                            azoteq,sense-freq = <0x0>;
+                            azoteq,sense-mode = <0xE>;
+                            azoteq,ati-mode = <0x3>;
+                            azoteq,ati-base = <200>;
+                            azoteq,ati-target = <320>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
new file mode 100644
index 0000000000..e424d67b05
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -0,0 +1,878 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs626a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS626A Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS626A is a 14-channel capacitive touch controller that features
+  additional Hall-effect and inductive sensing capabilities.
+
+  Link to datasheet: https://www.azoteq.com/
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: azoteq,iqs626a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  azoteq,suspend-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the power mode during suspend as follows:
+      0: Automatic (same as normal runtime, i.e. suspend/resume disabled)
+      1: Low power (all sensing at a reduced reporting rate)
+      2: Ultra-low power (ULP channel proximity sensing)
+      3: Halt (no sensing)
+
+  azoteq,clk-div:
+    type: boolean
+    description: Divides the device's core clock by a factor of 4.
+
+  azoteq,ulp-enable:
+    type: boolean
+    description:
+      Permits the device to automatically enter ultra-low-power mode from low-
+      power mode.
+
+  azoteq,ulp-update:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 3
+    description: |
+      Specifies the rate at which the trackpad, generic and Hall channels are
+      updated during ultra-low-power mode as follows:
+      0: 8
+      1: 13
+      2: 28
+      3: 54
+      4: 89
+      5: 135
+      6: 190
+      7: 256
+
+  azoteq,ati-band-disable:
+    type: boolean
+    description: Disables the ATI band check.
+
+  azoteq,ati-lp-only:
+    type: boolean
+    description: Limits automatic ATI to low-power mode.
+
+  azoteq,gpio3-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 1
+    description: |
+      Selects the channel or group of channels for which the GPIO3 pin
+      represents touch state as follows:
+      0: None
+      1: ULP channel
+      2: Trackpad
+      3: Trackpad
+      4: Generic channel 0
+      5: Generic channel 1
+      6: Generic channel 2
+      7: Hall channel
+
+  azoteq,reseed-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Specifies the event(s) that prompt the device to reseed (i.e. reset the
+      long-term average) of an associated channel as follows:
+      0: None
+      1: Proximity
+      2: Proximity or touch
+      3: Proximity, touch or deep touch
+
+  azoteq,thresh-extend:
+    type: boolean
+    description: Multiplies all touch and deep-touch thresholds by 4.
+
+  azoteq,tracking-enable:
+    type: boolean
+    description:
+      Enables all associated channels to track their respective reference
+      channels.
+
+  azoteq,reseed-offset:
+    type: boolean
+    description:
+      Applies an 8-count offset to all long-term averages upon either ATI or
+      reseed events.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 255
+    default: 150
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 255
+    default: 150
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,rate-ulp-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 0
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+  azoteq,timeout-pwr-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 2560
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is
+      present) from low-power mode to ultra-low-power mode.
+
+  azoteq,timeout-lta-ms:
+    multipleOf: 512
+    minimum: 0
+    maximum: 130560
+    default: 40960
+    description:
+      Specifies the length of time (in ms) to wait before resetting the long-
+      term average of all channels. Specify the maximum timeout to disable it
+      altogether.
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+patternProperties:
+  "^ulp-0|generic-[0-2]|hall$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+    properties:
+      azoteq,ati-exclude:
+        type: boolean
+        description:
+          Prevents the channel from participating in an ATI event that is
+          manually triggered during initialization.
+
+      azoteq,reseed-disable:
+        type: boolean
+        description:
+          Prevents the channel from being reseeded if the long-term average
+          timeout (defined in 'azoteq,timeout-lta') expires.
+
+      azoteq,meas-cap-decrease:
+        type: boolean
+        description:
+          Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+      azoteq,rx-inactive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+        description: |
+          Specifies how inactive CRX pins are to be terminated as follows:
+          0: VSS
+          1: Floating
+          2: VREG (generic channels only)
+
+      azoteq,linearize:
+        type: boolean
+        description:
+          Enables linearization of the channel's counts (generic and Hall
+          channels) or inverts the polarity of the channel's proximity or
+          touch states (ULP channel).
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,filt-disable:
+        type: boolean
+        description: Disables raw count filtering for the channel.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Semi-partial
+          2: Partial
+          3: Full
+
+          The default value is a function of the channel and the device's reset
+          user interface (RUI); reference the datasheet for further information
+          about the available RUI options.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [75, 100, 150, 200]
+        description:
+          Specifies the channel's ATI base. The default value is a function
+          of the channel and the device's RUI.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        description:
+          Specifies the channel's ATI target. The default value is a function
+          of the channel and the device's RUI.
+
+      azoteq,cct-increase:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 16
+        default: 0
+        description:
+          Specifies the degree to which the channel's charge cycle time is to
+          be increased, with 0 representing no increase. The maximum value is
+          limited to 4 in the case of the ULP channel, and the property is un-
+          available entirely in the case of the Hall channel.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the bias current applied during projected-capacitance
+          sensing as follows:
+          0: 2.5 uA
+          1: 5 uA
+          2: 10 uA
+          3: 20 uA
+
+          This property is unavailable in the case of the Hall channel.
+
+      azoteq,sense-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's sensing frequency as follows (parenthesized
+          numbers represent the frequency if 'azoteq,clk-div' is present):
+          0: 4 MHz (1 MHz)
+          1: 2 MHz (500 kHz)
+          2: 1 MHz (250 kHz)
+          3: 500 kHz (125 kHz)
+
+          This property is unavailable in the case of the Hall channel. The
+          default value is a function of the channel and the device's RUI.
+
+      azoteq,ati-band-tighten:
+        type: boolean
+        description:
+          Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and
+          generic channels only).
+
+      azoteq,proj-enable:
+        type: boolean
+        description: Enables projected-capacitance sensing (ULP channel only).
+
+      azoteq,filt-str-np-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during normal-power mode (ULP
+          and generic channels only).
+
+      azoteq,filt-str-lp-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during low-power mode (ULP and
+          generic channels only).
+
+      azoteq,filt-str-np-lta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the long-term average filter strength during normal-power
+          mode (ULP and generic channels only).
+
+      azoteq,filt-str-lp-lta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the long-term average filter strength during low-power mode
+          (ULP and generic channels only).
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the CRX pin(s) associated with the channel.
+
+          This property is unavailable in the case of the Hall channel. The
+          default value is a function of the channel and the device's RUI.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the TX pin(s) associated with the channel.
+
+          This property is unavailable in the case of the Hall channel. The
+          default value is a function of the channel and the device's RUI.
+
+      azoteq,local-cap-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4]
+        default: 0
+        description: |
+          Specifies the capacitance to be added to the channel as follows:
+          0: 0 pF
+          1: 0.5 pF
+          2: 1.0 pF
+          3: 1.5 pF
+          4: 2.0 pF
+
+          This property is unavailable in the case of the ULP or Hall channels.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 8, 9, 12, 14, 15]
+        description: |
+          Specifies the channel's sensing mode as follows:
+          0:  Self capacitance
+          1:  Projected capacitance
+          8:  Self inductance
+          9:  Mutual inductance
+          12: External
+          14: Hall effect
+          15: Temperature
+
+          This property is unavailable in the case of the ULP or Hall channels.
+          The default value is a function of the channel and the device's RUI.
+
+      azoteq,tx-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the inductive sensing excitation frequency as follows
+          (parenthesized numbers represent the frequency if 'azoteq,clk-div'
+          is present):
+          0: 16 MHz (4 MHz)
+          1: 8 MHz (2 MHz)
+          2: 4 MHz (1 MHz)
+          3: 2 MHz (500 kHz)
+
+          This property is unavailable in the case of the ULP or Hall channels.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity, touch and
+          deep-touch events relative to their respective thresholds (generic
+          channels only).
+
+      azoteq,comp-disable:
+        type: boolean
+        description:
+          Disables compensation for the channel (generic channels only).
+
+      azoteq,static-enable:
+        type: boolean
+        description:
+          Enables the static front-end for the channel (generic channels only).
+
+      azoteq,assoc-select:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        minItems: 1
+        maxItems: 6
+        items:
+          enum:
+            - ulp-0
+            - trackpad-3x2
+            - trackpad-3x3
+            - generic-0
+            - generic-1
+            - generic-2
+            - hall
+        description:
+          Specifies the associated channels for which the channel serves as a
+          reference channel. By default, no channels are selected. This prop-
+          erty is only available for the generic channels.
+
+      azoteq,assoc-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
+        description:
+          Specifies the channel's impact weight if it acts as an associated
+          channel (0 = 0% impact, 255 = 200% impact). This property is only
+          available for the generic channels.
+
+    patternProperties:
+      "^event-(prox|touch|deep)(-alt)?$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity, touch or deep-touch event reported by the
+          channel in response to a decrease in counts. Node names suffixed with
+          '-alt' instead correspond to an increase in counts.
+
+          By default, the long-term average tracks an increase in counts such
+          that only events corresponding to a decrease in counts are reported
+          (refer to the datasheet for more information).
+
+          Specify 'azoteq,dual-direction' to freeze the long-term average when
+          the counts increase or decrease such that events of either direction
+          can be reported. Alternatively, specify 'azoteq,invert-enable' to in-
+          vert the polarity of the states reported by the channel.
+
+          Complementary events (e.g. event-touch and event-touch-alt) can both
+          be present and specify different key or switch codes, but not differ-
+          ent thresholds or hysteresis (if applicable).
+
+          Proximity events are unavailable in the case of the Hall channel, and
+          deep-touch events are only available for the generic channels. Unless
+          otherwise specified, default values are a function of the channel and
+          the device's RUI.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description: Specifies the threshold for the event.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 15
+            description:
+              Specifies the hysteresis for the event (touch and deep-touch
+              events only).
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            description:
+              Specifies whether the event is to be interpreted as a key (1) or
+              a switch (5). By default, Hall-channel events are interpreted as
+              switches and all others are interpreted as keys.
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,assoc-weight: ["azoteq,assoc-select"]
+
+    additionalProperties: false
+
+  "^trackpad-3x[2-3]$":
+    type: object
+    $ref: input.yaml#
+    description:
+      Represents all channels associated with the trackpad. The channels are
+      collectively active if the trackpad is defined and inactive otherwise.
+
+    properties:
+      azoteq,ati-exclude:
+        type: boolean
+        description:
+          Prevents the trackpad channels from participating in an ATI event
+          that is manually triggered during initialization.
+
+      azoteq,reseed-disable:
+        type: boolean
+        description:
+          Prevents the trackpad channels from being reseeded if the long-term
+          average timeout (defined in 'azoteq,timeout-lta') expires.
+
+      azoteq,meas-cap-decrease:
+        type: boolean
+        description:
+          Decreases the internal measurement capacitance from 60 pF to 15 pF.
+
+      azoteq,rx-inactive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        default: 0
+        description: |
+          Specifies how inactive CRX pins are to be terminated as follows:
+          0: VSS
+          1: Floating
+
+      azoteq,linearize:
+        type: boolean
+        description: Inverts the polarity of the trackpad's touch state.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the trackpad's long-term averages are to freeze in
+          the presence of either increasing or decreasing counts, thereby
+          permitting events to be reported in either direction.
+
+      azoteq,filt-disable:
+        type: boolean
+        description: Disables raw count filtering for the trackpad channels.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the trackpad's ATI mode as follows:
+          0: Disabled
+          1: Semi-partial
+          2: Partial
+          3: Full
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 32
+        minimum: 0
+        maximum: 2016
+        default: 0
+        description: Specifies the trackpad's ATI target.
+
+      azoteq,cct-increase:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 4
+        default: 0
+        description:
+          Specifies the degree to which the trackpad's charge cycle time is to
+          be increased, with 0 representing no increase.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the bias current applied during projected-capacitance
+          sensing as follows:
+          0: 2.5 uA
+          1: 5 uA
+          2: 10 uA
+          3: 20 uA
+
+      azoteq,sense-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Specifies the trackpad's sensing frequency as follows (parenthesized
+          numbers represent the frequency if 'azoteq,clk-div' is present):
+          0: 4 MHz (1 MHz)
+          1: 2 MHz (500 kHz)
+          2: 1 MHz (250 kHz)
+          3: 500 kHz (125 kHz)
+
+      azoteq,ati-band-tighten:
+        type: boolean
+        description:
+          Tightens the ATI band from 1/8 to 1/16 of the desired target.
+
+      azoteq,hyst:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+        description: Specifies the trackpad's touch hysteresis.
+
+      azoteq,lta-update:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+        default: 0
+        description: |
+          Specifies the update rate of the trackpad's long-term average during
+          ultra-low-power mode as follows:
+          0: 2
+          1: 4
+          2: 8
+          3: 16
+          4: 32
+          5: 64
+          6: 128
+          7: 255
+
+      azoteq,filt-str-trackpad:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: Specifies the trackpad coordinate filter strength.
+
+      azoteq,filt-str-np-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during normal-power mode.
+
+      azoteq,filt-str-lp-cnt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+        description:
+          Specifies the raw count filter strength during low-power mode.
+
+      linux,keycodes:
+        minItems: 1
+        maxItems: 6
+        description: |
+          Specifies the numeric keycodes associated with each available gesture
+          in the following order (enter 0 for unused gestures):
+          0: Positive flick or swipe in X direction
+          1: Negative flick or swipe in X direction
+          2: Positive flick or swipe in Y direction
+          3: Negative flick or swipe in Y direction
+          4: Tap
+          5: Hold
+
+      azoteq,gesture-swipe:
+        type: boolean
+        description:
+          Directs the device to interpret axial gestures as a swipe (finger
+          remains on trackpad) instead of a flick (finger leaves trackpad).
+
+      azoteq,timeout-tap-ms:
+        multipleOf: 16
+        minimum: 0
+        maximum: 4080
+        default: 0
+        description:
+          Specifies the length of time (in ms) within which a trackpad touch
+          must be released in order to be interpreted as a tap.
+
+      azoteq,timeout-swipe-ms:
+        multipleOf: 16
+        minimum: 0
+        maximum: 4080
+        default: 0
+        description:
+          Specifies the length of time (in ms) within which an axial gesture
+          must be completed in order to be interpreted as a flick or swipe.
+
+      azoteq,thresh-swipe:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        default: 0
+        description:
+          Specifies the number of points across which an axial gesture must
+          travel in order to be interpreted as a flick or swipe.
+
+    patternProperties:
+      "^channel-[0-8]$":
+        type: object
+        description: Represents a single trackpad channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 0
+            description: Specifies the threshold for the channel.
+
+          azoteq,ati-base:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 45
+            maximum: 300
+            default: 45
+            description: Specifies the channel's ATI base.
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,gesture-swipe: ["linux,keycodes"]
+      azoteq,timeout-tap-ms: ["linux,keycodes"]
+      azoteq,timeout-swipe-ms: ["linux,keycodes"]
+      azoteq,thresh-swipe: ["linux,keycodes"]
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touch@44 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    compatible = "azoteq,iqs626a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    azoteq,rate-np-ms = <16>;
+                    azoteq,rate-lp-ms = <160>;
+
+                    azoteq,timeout-pwr-ms = <2560>;
+                    azoteq,timeout-lta-ms = <32768>;
+
+                    ulp-0 {
+                            azoteq,meas-cap-decrease;
+
+                            azoteq,ati-base = <75>;
+                            azoteq,ati-target = <1024>;
+
+                            azoteq,rx-enable = <2>, <3>, <4>,
+                                               <5>, <6>, <7>;
+
+                            event-prox {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    trackpad-3x3 {
+                            azoteq,filt-str-np-cnt = <1>;
+                            azoteq,filt-str-lp-cnt = <1>;
+
+                            azoteq,hyst = <4>;
+
+                            azoteq,ati-mode = <3>;
+                            azoteq,ati-target = <512>;
+
+                            azoteq,proj-bias = <1>;
+                            azoteq,sense-freq = <2>;
+
+                            linux,keycodes = <KEY_VOLUMEUP>,
+                                             <KEY_VOLUMEDOWN>,
+                                             <KEY_NEXTSONG>,
+                                             <KEY_PREVIOUSSONG>,
+                                             <KEY_PLAYPAUSE>,
+                                             <KEY_STOPCD>;
+
+                            azoteq,gesture-swipe;
+                            azoteq,timeout-swipe-ms = <800>;
+                            azoteq,timeout-tap-ms = <400>;
+                            azoteq,thresh-swipe = <40>;
+
+                            channel-0 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-1 {
+                                    azoteq,thresh = <40>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-2 {
+                                    azoteq,thresh = <40>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-3 {
+                                    azoteq,thresh = <38>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-4 {
+                                    azoteq,thresh = <33>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-5 {
+                                    azoteq,thresh = <38>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-6 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-7 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-8 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+                    };
+
+                    /*
+                     * Preserve the default register settings for
+                     * the temperature-tracking channel leveraged
+                     * by reset user interface (RUI) 1.
+                     *
+                     * Scalar properties (e.g. ATI mode) are left
+                     * untouched by simply omitting them; boolean
+                     * properties must be specified explicitly as
+                     * needed.
+                     */
+                    generic-2 {
+                            azoteq,reseed-disable;
+                            azoteq,meas-cap-decrease;
+                            azoteq,dual-direction;
+                            azoteq,comp-disable;
+                            azoteq,static-enable;
+                    };
+
+                    hall {
+                            azoteq,reseed-disable;
+                            azoteq,meas-cap-decrease;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
new file mode 100644
index 0000000000..0aa951f0ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Keys and Switches
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
+  ing capabilities that can facilitate a variety of contactless key and switch
+  applications.
+
+  These functions are collectively represented by a "keys" child node from the
+  parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
+  further details and examples. Sensor hardware configuration (self-capacitive
+  vs. mutual-inductive, etc.) is selected based on the device's firmware.
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-keys
+      - azoteq,iqs621-keys
+      - azoteq,iqs622-keys
+      - azoteq,iqs624-keys
+      - azoteq,iqs625-keys
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 16
+    description: |
+      Specifies the numeric keycodes associated with each available touch or
+      proximity event according to the following table. An 'x' indicates the
+      event is supported for a given device. Specify 0 for unused events.
+
+      -------------------------------------------------------------------------
+      | #  | Event              | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
+      -------------------------------------------------------------------------
+      | 0  | CH0 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 1  | CH0 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      |    | Antenna 1 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 2  | CH1 Touch          |    x    |    x   |    x   |    x   |    x   |
+      |    | Ant. 1 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 3  | CH1 Proximity      |    x    |    x   |    x   |    x   |    x   |
+      -------------------------------------------------------------------------
+      | 4  | CH2 Touch          |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 5  | CH2 Proximity      |    x    |        |        |        |        |
+      |    | Antenna 2 Prox.*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 6  | Metal (+) Touch**  |    x    |    x   |        |        |        |
+      |    | Ant. 2 Deep Touch* |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 7  | Metal (+) Prox.**  |    x    |    x   |        |        |        |
+      |    | Antenna 2 Touch*   |    x    |        |        |        |        |
+      -------------------------------------------------------------------------
+      | 8  | Metal (-) Touch**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 9  | Metal (-) Prox.**  |    x    |    x   |        |        |        |
+      -------------------------------------------------------------------------
+      | 10 | SAR Active***      |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 11 | SAR Quick Rel.***  |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 12 | SAR Movement***    |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 13 | SAR Filter Halt*** |    x    |        |    x   |        |        |
+      -------------------------------------------------------------------------
+      | 14 | Wheel Up           |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      | 15 | Wheel Down         |         |        |        |    x   |        |
+      -------------------------------------------------------------------------
+      *   Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
+          if enabled via firmware.
+      **  "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
+          where "LTA" is defined as the channel's long-term average.
+      *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
+          via firmware.
+
+patternProperties:
+  "^hall-switch-(north|south)$":
+    type: object
+    $ref: input.yaml#
+    description:
+      Represents north/south-field Hall-effect sensor touch or proximity
+      events. Note that north/south-field orientation is reversed on the
+      IQS620AXzCSR device due to its flip-chip package.
+
+    properties:
+      linux,code: true
+
+      azoteq,use-prox:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If present, specifies that Hall-effect sensor reporting should
+          use the device's wide-range proximity threshold instead of its
+          close-range touch threshold (default).
+
+    required:
+      - linux,code
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs624-keys
+          - azoteq,iqs625-keys
+then:
+  patternProperties:
+    "^hall-switch-(north|south)$": false
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
new file mode 100644
index 0000000000..2b075a080d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
@@ -0,0 +1,34 @@
+NXP LPC32xx Key Scan Interface
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+Required Properties:
+- compatible: Should be "nxp,lpc3220-key"
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The interrupt number to the cpu.
+- clocks: phandle to clock controller plus clock-specifier pair
+- nxp,debounce-delay-ms: Debounce delay in ms
+- nxp,scan-delay-ms: Repeated scan period in ms
+- linux,keymap: the key-code to be reported when the key is pressed
+  and released, see also
+  Documentation/devicetree/bindings/input/matrix-keymap.txt
+
+Note: keypad,num-rows and keypad,num-columns are required, and must be equal
+since LPC32xx only supports square matrices
+
+Example:
+
+	key@40050000 {
+		compatible = "nxp,lpc3220-key";
+		reg = <0x40050000 0x1000>;
+		clocks = <&clk LPC32XX_CLK_KEY>;
+		interrupt-parent = <&sic1>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <1>;
+		nxp,debounce-delay-ms = <3>;
+		nxp,scan-delay-ms = <34>;
+		linux,keymap = <0x00000002>;
+	};
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt
new file mode 100644
index 0000000000..79f6d01aec
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.txt
@@ -0,0 +1 @@
+This file has been moved to matrix-keymap.yaml
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
new file mode 100644
index 0000000000..a715c2a773
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Key Matrices on Matrix-connected Key Boards
+
+maintainers:
+  - Olof Johansson <olof@lixom.net>
+
+description: |
+  A simple common binding for matrix-connected key boards. Currently targeted at
+  defining the keys in the scope of linux key codes since that is a stable and
+  standardized interface at this time.
+
+  Some users of this binding might choose to specify secondary keymaps for
+  cases where there is a modifier key such as a Fn key. Proposed names
+  for said properties are "linux,fn-keymap" or with another descriptive
+  word for the modifier other from "Fn".
+
+properties:
+  linux,keymap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      An array of packed 1-cell entries containing the equivalent of row,
+      column and linux key-code. The 32-bit big endian cell is packed as:
+          row << 24 | column << 16 | key-code
+
+  keypad,num-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of row lines connected to the keypad controller.
+
+  keypad,num-columns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of column lines connected to the keypad controller.
+
+additionalProperties: true
+
+examples:
+  - |
+    keypad {
+        /* ... */
+        linux,keymap = < 0x00030012
+                         0x0102003a >;
+        keypad,num-rows = <2>;
+        keypad,num-columns = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
new file mode 100644
index 0000000000..48edc0c8c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/max77650-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onkey driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The onkey controller is represented as a sub-node of the PMIC node on
+  the device tree.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: maxim,max77650-onkey
+
+  linux,code:
+    default: 116  # KEY_POWER
+
+  maxim,onkey-slide:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The system's button is a slide switch, not the default push button.
+
+required:
+  - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
new file mode 100644
index 0000000000..47aac8794b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller
+
+maintainers:
+  - Mattijs Korpershoek <mkorpershoek@baylibre.com>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description: |
+  Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6779-keypad
+      - items:
+          - enum:
+              - mediatek,mt6873-keypad
+          - const: mediatek,mt6779-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kpd
+
+  wakeup-source:
+    description: use any event on keypad as wakeup event
+    type: boolean
+
+  debounce-delay-ms:
+    maximum: 256
+    default: 16
+
+  mediatek,keys-per-group:
+    description: each (row, column) group has multiple keys
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        keyboard@10010000 {
+          compatible = "mediatek,mt6779-keypad";
+          reg = <0 0x10010000 0 0x1000>;
+          interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+          clocks = <&clk26m>;
+          clock-names = "kpd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 0000000000..e34c9e78d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  There are two key functions provided by MT6397, MT6323 and other MediaTek
+  PMICs: pwrkey and homekey.
+  The key functions are defined as the subnode of the function node provided
+  by the PMIC that is defined as a Multi-Function Device (MFD).
+
+  For MediaTek MT6323/MT6397 PMIC bindings see
+  Documentation/devicetree/bindings/mfd/mt6397.txt
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6323-keys
+      - mediatek,mt6331-keys
+      - mediatek,mt6357-keys
+      - mediatek,mt6358-keys
+      - mediatek,mt6397-keys
+
+  power-off-time-sec: true
+
+  mediatek,long-press-mode:
+    description: |
+      Key long-press force shutdown setting
+      0 - disabled
+      1 - pwrkey
+      2 - pwrkey+homekey
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 2
+
+patternProperties:
+  "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+    $ref: input.yaml#
+
+    properties:
+      interrupts:
+        minItems: 1
+        items:
+          - description: Key press interrupt
+          - description: Key release interrupt
+
+      interrupt-names: true
+
+      linux,keycodes:
+        maxItems: 1
+
+      wakeup-source: true
+
+    required:
+      - linux,keycodes
+
+    if:
+      properties:
+        interrupt-names:
+          contains:
+            const: powerkey
+    then:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: powerkey
+            - const: powerkey_r
+    else:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: homekey
+            - const: homekey_r
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        compatible = "mediatek,mt6397";
+
+        keys {
+          compatible = "mediatek,mt6397-keys";
+          mediatek,long-press-mode = <1>;
+          power-off-time-sec = <0>;
+
+          key-power {
+            linux,keycodes = <KEY_POWER>;
+            wakeup-source;
+          };
+
+          key-home {
+            linux,keycodes = <KEY_VOLUMEDOWN>;
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
new file mode 100644
index 0000000000..5b5d4f7d34
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/microchip,cap11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CAP11xx based capacitive touch sensors
+
+description: |
+  The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive
+  touch controllers and LED drivers. The device communication via I2C only.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,cap1106
+      - microchip,cap1126
+      - microchip,cap1188
+      - microchip,cap1203
+      - microchip,cap1206
+      - microchip,cap1293
+      - microchip,cap1298
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Property describing the interrupt line the
+      device's ALERT#/CM_IRQ# pin is connected to.
+      The device only has one interrupt source.
+
+  autorepeat:
+    description: |
+      Enables the Linux input system's autorepeat feature on the input device.
+
+  linux,keycodes:
+    minItems: 6
+    maxItems: 6
+    description: |
+      Specifies an array of numeric keycode values to
+      be used for the channels. If this property is
+      omitted, KEY_A, KEY_B, etc are used as defaults.
+      The array must have exactly six entries.
+
+  microchip,sensor-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    enum: [1, 2, 4, 8]
+    description: |
+      Defines the gain of the sensor circuitry. This
+      effectively controls the sensitivity, as a
+      smaller delta capacitance is required to
+      generate the same delta count values.
+
+  microchip,irq-active-high:
+    type: boolean
+    description: |
+      By default the interrupt pin is active low
+      open drain. This property allows using the active
+      high push-pull output.
+
+patternProperties:
+  "^led@[0-7]$":
+    type: object
+    description: CAP11xx LEDs
+    $ref: /schemas/leds/common.yaml#
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      label: true
+
+      linux,default-trigger: true
+
+      default-state: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: input.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,cap1106
+    then:
+      patternProperties:
+        "^led@[0-7]$": false
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touch@28 {
+        compatible = "microchip,cap1188";
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 0>;
+        reg = <0x28>;
+        autorepeat;
+        microchip,sensor-gain = <2>;
+
+        linux,keycodes = <103>,	/* KEY_UP */
+                         <106>,	/* KEY_RIGHT */
+                         <108>,	/* KEY_DOWN */
+                         <105>,	/* KEY_LEFT */
+                         <109>,	/* KEY_PAGEDOWN */
+                         <104>;	/* KEY_PAGEUP */
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+                label = "cap11xx:green:usr0";
+                reg = <0>;
+        };
+
+        led@1 {
+                label = "cap11xx:green:usr1";
+                reg = <1>;
+        };
+
+        led@2 {
+                label = "cap11xx:green:alive";
+                reg = <2>;
+                linux,default-trigger = "heartbeat";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/microchip,qt1050.txt b/Documentation/devicetree/bindings/input/microchip,qt1050.txt
new file mode 100644
index 0000000000..80e75f9625
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/microchip,qt1050.txt
@@ -0,0 +1,78 @@
+Microchip AT42QT1050 Five-channel Touch Sensor IC
+
+The AT42QT1050 (QT1050) is a QTouchADC sensor device. The device can sense from
+one to five keys, dependent on mode. The QT1050 includes all signal processing
+functions necessary to provide stable sensing under a wide variety of changing
+conditions, and the outputs are fully debounced.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: Must be "microchip,qt1050"
+- reg: The I2C address of the device
+- interrupts: The sink for the touchpad's IRQ output,
+  see ../interrupt-controller/interrupts.txt
+
+Optional properties:
+- wakeup-source: touch keys can be used as a wakeup source
+
+Each button (key) is represented as a sub-node:
+
+Each not specified key or key with linux,code set to KEY_RESERVED gets disabled
+in HW.
+
+Subnode properties:
+- linux,code: Keycode to emit.
+- reg: The key number. Valid values: 0, 1, 2, 3, 4.
+
+Optional subnode-properties:
+
+If a optional property is missing or has a invalid value the default value is
+taken.
+
+- microchip,pre-charge-time-ns:
+  Each touchpad need some time to precharge. The value depends on the mechanical
+  layout.
+  Valid value range: 0 - 637500; values must be a multiple of 2500;
+  default is 0.
+- microchip,average-samples:
+  Number of data samples which are averaged for each read.
+  Valid values: 1, 4, 16, 64, 256, 1024, 4096, 16384; default is 1.
+- microchip,average-scaling:
+  The scaling factor which is used to scale the average-samples.
+  Valid values: 1, 2, 4, 8, 16, 32, 64, 128; default is 1.
+- microchip,threshold:
+  Number of counts to register a touch detection.
+  Valid value range: 0 - 255; default is 20.
+
+Example:
+QT1050 with 3 non continuous keys, key2 and key4 are disabled.
+
+touchkeys@41 {
+	compatible = "microchip,qt1050";
+	reg = <0x41>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+	up@0 {
+		reg = <0>;
+		linux,code = <KEY_UP>;
+		microchip,average-samples = <64>;
+		microchip,average-scaling = <16>;
+		microchip,pre-charge-time-ns = <10000>;
+	};
+
+	right@1 {
+		reg = <1>;
+		linux,code = <KEY_RIGHT>;
+		microchip,average-samples = <64>;
+		microchip,average-scaling = <8>;
+	};
+
+	down@3 {
+		reg = <3>;
+		linux,code = <KEY_DOWN>;
+		microchip,average-samples = <256>;
+		microchip,average-scaling = <16>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
new file mode 100644
index 0000000000..1faa7292e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -0,0 +1,55 @@
+* Tegra keyboard controller
+The key controller has maximum 24 pins to make matrix keypad. Any pin
+can be configured as row or column. The maximum column pin can be 8
+and maximum row pins can be 16 for Tegra20/Tegra30.
+
+Required properties:
+- compatible: "nvidia,tegra20-kbc"
+- reg: Register base address of KBC.
+- interrupts: Interrupt number for the KBC.
+- nvidia,kbc-row-pins: The KBC pins which are configured as row. This is an
+  array of pin numbers which is used as rows.
+- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an
+  array of pin numbers which is used as column.
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - kbc
+
+Optional properties, in addition to those specified by the shared
+matrix-keyboard bindings:
+
+- linux,fn-keymap: a second keymap, same specification as the
+  matrix-keyboard-controller spec but to be used when the KEY_FN modifier
+  key is pressed.
+- nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
+- nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
+- nvidia,ghost-filter: enable ghost filtering for this device
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+		 (Legacy property supported: "nvidia,wakeup-source")
+
+Example:
+
+keyboard: keyboard {
+	compatible = "nvidia,tegra20-kbc";
+	reg = <0x7000e200 0x100>;
+	interrupts = <0 85 0x04>;
+	clocks = <&tegra_car 36>;
+	resets = <&tegra_car 36>;
+	reset-names = "kbc";
+	nvidia,ghost-filter;
+	nvidia,debounce-delay-ms = <640>;
+	nvidia,kbc-row-pins = <0 1 2>;    /* pin 0, 1, 2 as rows */
+	nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */
+	linux,keymap = <0x00000074
+			0x00010067
+			0x00020066
+			0x01010068
+			0x02000069
+			0x02010070
+			0x02020071>;
+};
diff --git a/Documentation/devicetree/bindings/input/omap-keypad.txt b/Documentation/devicetree/bindings/input/omap-keypad.txt
new file mode 100644
index 0000000000..34ed1c60ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/omap-keypad.txt
@@ -0,0 +1,28 @@
+* TI's Keypad Controller device tree bindings
+
+TI's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,omap4-keypad": For controllers compatible with omap4 keypad
+      controller.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+Example:
+	keypad@4ae1c000{
+		compatible = "ti,omap4-keypad";
+		keypad,num-rows = <2>;
+		keypad,num-columns = <8>;
+		linux,keypad-no-autorepeat;
+	};
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 0000000000..490f6c3d9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+  It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+  subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+  compatible:
+    const: pine64,pinephone-keyboard
+
+  reg:
+    const: 0x15
+
+  interrupts:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply for the keyboard MCU
+
+  wakeup-source: true
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      keyboard@15 {
+        compatible = "pine64,pinephone-keyboard";
+        reg = <0x15>;
+        interrupt-parent = <&r_pio>;
+        interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          charger@75 {
+            reg = <0x75>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt
new file mode 100644
index 0000000000..3029c5694c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt
@@ -0,0 +1,16 @@
+Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse.
+
+The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system,
+these properties are built from information in the AMBA plug&play and from
+bootloader settings.
+
+Required properties:
+
+- name : Should be "GAISLER_APBPS2" or "01_060"
+- reg : Address and length of the register set for the device
+- interrupts : Interrupt numbers for this device
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
new file mode 100644
index 0000000000..a7611c2069
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pwm-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM beeper
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-beeper
+
+  pwms:
+    maxItems: 1
+
+  amp-supply:
+    description: an amplifier for the beeper
+
+  beeper-hz:
+    description: bell frequency in Hz
+    minimum: 10
+    maximum: 10000
+
+required:
+  - compatible
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "pwm-beeper";
+        pwms = <&pwm0>;
+        amp-supply = <&beeper_amp>;
+        beeper-hz = <1000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 0000000000..6398534b43
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pwm-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM vibrator
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Registers a PWM device as vibrator. It is expected, that the vibrator's
+  strength increases based on the duty cycle of the enable PWM channel
+  (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+  The binding supports an optional direction PWM channel, that can be
+  driven at fixed duty cycle. If available this is can be used to increase
+  the vibration effect of some devices.
+
+properties:
+  compatible:
+    const: pwm-vibrator
+
+  pwm-names:
+    items:
+      - const: enable
+      - const: direction
+    minItems: 1
+
+  pwms:
+    minItems: 1
+    maxItems: 2
+
+  enable-gpios: true
+
+  vcc-supply: true
+
+  direction-duty-cycle-ns:
+    description: >
+      Duty cycle of the direction PWM channel in nanoseconds,
+      defaults to 50% of the channel's period.
+
+required:
+  - compatible
+  - pwm-names
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    vibrator {
+        compatible = "pwm-vibrator";
+        pwms = <&pwm9 0 1000000000 0>,
+               <&pwm8 0 1000000000 0>;
+        pwm-names = "enable", "direction";
+        direction-duty-cycle-ns = <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
new file mode 100644
index 0000000000..f8674f7e5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
@@ -0,0 +1,60 @@
+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+  recognized when it is pressed. It is a u32 value, and bit[31:16]
+  is debounce interval for direct key and bit[15:0] is debounce
+  interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+  are used. If bit[X] of the mask is set, the direct key X
+  is used.
+- marvell,direct-key-low-active : Direct key status register
+  tells the level of pins that connects to the direct keyes.
+  When this property is set, it means that when the pin level
+  is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+  the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+  linux key-code for rotary up. Bit[15:0] is the linux key-code
+  for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+  in the device, the value indicates the key-code for relative
+  axes measurement in the device. It is a u32 value. Bit[31:16]
+  is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+	keypad: keypad@d4012000 {
+		keypad,num-rows = <3>;
+		keypad,num-columns = <5>;
+		linux,keymap = <0x0000000e	/* KEY_BACKSPACE */
+				0x0001006b	/* KEY_END */
+				0x00020061	/* KEY_RIGHTCTRL */
+				0x0003000b	/* KEY_0 */
+				0x00040002	/* KEY_1 */
+				0x0100008b	/* KEY_MENU */
+				0x01010066	/* KEY_HOME */
+				0x010200e7	/* KEY_SEND */
+				0x01030009	/* KEY_8 */
+				0x0104000a	/* KEY_9 */
+				0x02000160	/* KEY_OK */
+				0x02010003	/* KEY_2 */
+				0x02020004	/* KEY_3 */
+				0x02030005	/* KEY_4 */
+				0x02040006>;	/* KEY_5 */
+		marvell,rotary0 = <0x006c0067>;	/* KEY_UP & KEY_DOWN */
+		marvell,direct-key-count = <1>;
+		marvell,direct-key-map = <0x001c>;
+		marvell,debounce-interval = <0x001e001e>;
+	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
new file mode 100644
index 0000000000..12c74c0832
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC Power Key
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8921-pwrkey
+          - qcom,pm8058-pwrkey
+      - items:
+          - enum:
+              - qcom,pm8018-pwrkey
+          - const: qcom,pm8921-pwrkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: key release
+      - description: key press
+
+  debounce:
+    description:
+      Time in microseconds that key must be pressed or
+      released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pull-up:
+    description:
+      Presence of this property indicates that the KPDPWR_N
+      pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   ssbi {
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     pmic@0 {
+       reg = <0x0>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pwrkey@1c {
+         compatible = "qcom,pm8921-pwrkey";
+         reg = <0x1c>;
+         interrupt-parent = <&pmicint>;
+         interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+         debounce = <15625>;
+         pull-up;
+       };
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
new file mode 100644
index 0000000000..62314a5fdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8941 PMIC Power Key
+
+maintainers:
+  - Courtney Cavin <courtney.cavin@sonymobile.com>
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8941-pwrkey
+      - qcom,pm8941-resin
+      - qcom,pmk8350-pwrkey
+      - qcom,pmk8350-resin
+
+  interrupts:
+    maxItems: 1
+
+  debounce:
+    description: |
+          Time in microseconds that key must be pressed or
+          released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  bias-pull-up:
+    description: |
+           Presence of this property indicates that the KPDPWR_N
+           pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  linux,code:
+    description: |
+           The input key-code associated with the power key.
+           Use the linux event codes defined in
+           include/dt-bindings/input/linux-event-codes.h
+           When property is omitted KEY_POWER is assumed.
+
+required:
+  - compatible
+  - interrupts
+
+unevaluatedProperties: false
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
new file mode 100644
index 0000000000..4a9dc6ba96
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
@@ -0,0 +1,90 @@
+Qualcomm PM8xxx PMIC Keypad
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-keypad"
+		    "qcom,pm8921-keypad"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address of keypad control register
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first interrupt specifies the key sense interrupt
+		    and the second interrupt specifies the key stuck interrupt.
+		    The format of the specifier is defined by the binding
+		    document describing the node's interrupt parent.
+
+- linux,keymap:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the linux keymap. More information can be found in
+		    input/matrix-keymap.txt.
+
+- linux,keypad-no-autorepeat:
+	Usage: optional
+	Value type: <bool>
+	Definition: don't enable autorepeat feature.
+
+- wakeup-source:
+	Usage: optional
+	Value type: <bool>
+	Definition: use any event on keypad as wakeup event.
+		    (Legacy property supported: "linux,keypad-wakeup")
+
+- keypad,num-rows:
+	Usage: required
+	Value type: <u32>
+	Definition: number of rows in the keymap. More information can be found
+		    in input/matrix-keymap.txt.
+
+- keypad,num-columns:
+	Usage: required
+	Value type: <u32>
+	Definition: number of columns in the keymap. More information can be
+		    found in input/matrix-keymap.txt.
+
+- debounce:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds that key must be pressed or release
+		    for key sense interrupt to trigger.
+
+- scan-delay:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds to pause between successive scans
+		    of the matrix array.
+
+- row-hold:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in nanoseconds to pause between scans of each row in
+		    the matrix array.
+
+EXAMPLE
+
+	keypad@148 {
+		compatible = "qcom,pm8921-keypad";
+		reg = <0x148>;
+		interrupt-parent = <&pmicintc>;
+		interrupts = <74 1>, <75 1>;
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(0, 3, KEY_CAMERA)
+			>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <5>;
+		debounce = <15>;
+		scan-delay = <32>;
+		row-hold = <91500>;
+	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 0000000000..c8832cd0d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-vib
+      - qcom,pm8916-vib
+      - qcom,pm8921-vib
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@4a {
+            compatible = "qcom,pm8058-vib";
+            reg = <0x4a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
new file mode 100644
index 0000000000..99a4f2ab55
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/raydium_i2c_ts.txt
@@ -0,0 +1,19 @@
+Raydium I2C touchscreen
+
+Required properties:
+- compatible: must be "raydium,rm32380"
+- reg: The I2C address of the device
+- interrupts: interrupt to which the chip is connected
+    See ../interrupt-controller/interrupts.txt
+Optional properties:
+- avdd-supply: analog power supply needed to power device
+- vccio-supply: IO Power source
+- reset-gpios: reset gpio the chip is connected to.
+
+Example:
+	touchscreen@39 {
+		compatible = "raydium,rm32380";
+		reg = <0x39>;
+		interrupt-parent = <&gpio>;
+		interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+	};
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
new file mode 100644
index 0000000000..cf63f834dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/regulator-haptic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator Haptic
+
+maintainers:
+  - Jaewon Kim <jaewon02.kim@samsung.com>
+
+properties:
+  compatible:
+    const: regulator-haptic
+
+  haptic-supply:
+    description: >
+      Power supply to the haptic motor
+
+  max-microvolt:
+    description: >
+      The maximum voltage value supplied to the haptic motor
+
+  min-microvolt:
+    description: >
+      The minimum voltage value supplied to the haptic motor
+
+required:
+  - compatible
+  - haptic-supply
+  - max-microvolt
+  - min-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    haptics {
+        compatible = "regulator-haptic";
+        haptic-supply = <&motor_regulator>;
+        max-microvolt = <2700000>;
+        min-microvolt = <1100000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt
new file mode 100644
index 0000000000..a644408b33
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt
@@ -0,0 +1,50 @@
+Rotary encoder DT bindings
+
+Required properties:
+- gpios: a spec for at least two GPIOs to be used, most significant first
+
+Optional properties:
+- linux,axis: the input subsystem axis to map to this rotary encoder.
+  Defaults to 0 (ABS_X / REL_X)
+- rotary-encoder,steps: Number of steps in a full turnaround of the
+  encoder. Only relevant for absolute axis. Defaults to 24 which is a
+  typical value for such devices.
+- rotary-encoder,relative-axis: register a relative axis rather than an
+  absolute one. Relative axis will only generate +1/-1 events on the input
+  device, hence no steps need to be passed.
+- rotary-encoder,rollover: Automatic rollover when the rotary value becomes
+  greater than the specified steps or smaller than 0. For absolute axis only.
+- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
+  The values have the following meaning:
+  1: Full-period mode (default)
+  2: Half-period mode
+  4: Quarter-period mode
+- wakeup-source: Boolean, rotary encoder can wake up the system.
+- rotary-encoder,encoding: String, the method used to encode steps.
+  Supported are "gray" (the default and more common) and "binary".
+
+Deprecated properties:
+- rotary-encoder,half-period: Makes the driver work on half-period mode.
+  This property is deprecated. Instead, a 'steps-per-period ' value should
+  be used, such as "rotary-encoder,steps-per-period = <2>".
+
+See Documentation/input/devices/rotary-encoder.rst for more information.
+
+Example:
+
+		rotary@0 {
+			compatible = "rotary-encoder";
+			gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
+			linux,axis = <0>; /* REL_X */
+			rotary-encoder,encoding = "gray";
+			rotary-encoder,relative-axis;
+		};
+
+		rotary@1 {
+			compatible = "rotary-encoder";
+			gpios = <&gpio 21 0>, <&gpio 22 0>;
+			linux,axis = <1>; /* ABS_Y */
+			rotary-encoder,steps = <24>;
+			rotary-encoder,encoding = "binary";
+			rotary-encoder,rollover;
+		};
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
new file mode 100644
index 0000000000..4c5c0a8258
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -0,0 +1,77 @@
+* Samsung's Keypad Controller device tree bindings
+
+Samsung's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+  - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
+    controller.
+  - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
+    controller.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+- samsung,keypad-num-rows: Number of row lines connected to the keypad
+  controller.
+
+- samsung,keypad-num-columns: Number of column lines connected to the
+  keypad controller.
+
+- Keys represented as child nodes: Each key connected to the keypad
+  controller is represented as a child node to the keypad controller
+  device node and should include the following properties.
+  - keypad,row: the row number to which the key is connected.
+  - keypad,column: the column number to which the key is connected.
+  - linux,code: the key-code to be reported when the key is pressed
+    and released.
+
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Optional Properties:
+- wakeup-source: use any event on keypad as wakeup event.
+		 (Legacy property supported: "linux,input-wakeup")
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+
+Example:
+	keypad@100a0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <173>;
+		samsung,keypad-num-rows = <2>;
+		samsung,keypad-num-columns = <8>;
+		linux,input-no-autorepeat;
+		wakeup-source;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_columns>;
+
+		key_1 {
+			keypad,row = <0>;
+			keypad,column = <3>;
+			linux,code = <2>;
+		};
+
+		key_2 {
+			keypad,row = <0>;
+			keypad,column = <4>;
+			linux,code = <3>;
+		};
+
+		key_3 {
+			keypad,row = <0>;
+			keypad,column = <5>;
+			linux,code = <4>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/spear-keyboard.txt b/Documentation/devicetree/bindings/input/spear-keyboard.txt
new file mode 100644
index 0000000000..4a846d26da
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/spear-keyboard.txt
@@ -0,0 +1,20 @@
+* SPEAr keyboard controller
+
+Required properties:
+- compatible: "st,spear300-kbd"
+
+Optional properties, in addition to those specified by the shared
+matrix-keyboard bindings:
+- autorepeat: bool: enables key autorepeat
+- st,mode: keyboard mode: 0 - 9x9, 1 - 6x6, 2 - 2x2
+
+Example:
+
+kbd@fc400000 {
+	compatible = "st,spear300-kbd";
+	reg = <0xfc400000 0x100>;
+	linux,keymap = < 0x00030012
+			 0x0102003a >;
+	autorepeat;
+	st,mode = <0>;
+};
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
new file mode 100644
index 0000000000..a401a0bfcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27xx PMIC Vibrator
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2721-vibrator
+      - sprd,sc2730-vibrator
+      - sprd,sc2731-vibrator
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sc2731_pmic: pmic@0 {
+      compatible = "sprd,sc2731";
+      reg = <0 0>;
+      spi-max-frequency = <26000000>;
+      interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      vibrator@eb4 {
+        compatible = "sprd,sc2731-vibrator";
+        reg = <0xeb4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt
new file mode 100644
index 0000000000..51eb428e5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st-keyscan.txt
@@ -0,0 +1,60 @@
+* ST Keyscan controller Device Tree bindings
+
+The ST keyscan controller Device Tree binding is based on the
+matrix-keymap.
+
+Required properties:
+- compatible: "st,sti-keyscan"
+
+- reg: Register base address and size of st-keyscan controller.
+
+- interrupts: Interrupt number for the st-keyscan controller.
+
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+
+- pinctrl: Should specify pin control groups used for this controller.
+  See ../pinctrl/pinctrl-bindings.txt for details.
+
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+
+- keypad,num-columns: Number of column lines connected to the keypad
+  controller.
+
+Optional property:
+- st,debounce_us: Debouncing interval time in microseconds
+
+Example:
+
+keyscan: keyscan@fe4b0000 {
+	compatible = "st,sti-keyscan";
+	reg = <0xfe4b0000 0x2000>;
+	interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+	clocks	= <&CLK_SYSIN>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_keyscan>;
+
+	keypad,num-rows = <4>;
+	keypad,num-columns = <4>;
+	st,debounce_us = <5000>;
+
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+			 MATRIX_KEY(0x00, 0x01, KEY_F9)
+			 MATRIX_KEY(0x00, 0x02, KEY_F5)
+			 MATRIX_KEY(0x00, 0x03, KEY_F1)
+			 MATRIX_KEY(0x01, 0x00, KEY_F14)
+			 MATRIX_KEY(0x01, 0x01, KEY_F10)
+			 MATRIX_KEY(0x01, 0x02, KEY_F6)
+			 MATRIX_KEY(0x01, 0x03, KEY_F2)
+			 MATRIX_KEY(0x02, 0x00, KEY_F15)
+			 MATRIX_KEY(0x02, 0x01, KEY_F11)
+			 MATRIX_KEY(0x02, 0x02, KEY_F7)
+			 MATRIX_KEY(0x02, 0x03, KEY_F3)
+			 MATRIX_KEY(0x03, 0x00, KEY_F16)
+			 MATRIX_KEY(0x03, 0x01, KEY_F12)
+			 MATRIX_KEY(0x03, 0x02, KEY_F8)
+			 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+	};
diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml
new file mode 100644
index 0000000000..4d4e1a8e36
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml
@@ -0,0 +1,271 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/syna,rmi4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics RMI4 compliant devices
+
+maintainers:
+  - Jason A. Donenfeld <Jason@zx2c4.com>
+  - Matthias Schiffer <matthias.schiffer@ew.tq-group.com
+  - Vincent Huang <vincent.huang@tw.synaptics.com>
+
+description: |
+  The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4
+  devices using different transports (I2C, SPI) and different functions (e.g.
+  Function 1, 2D sensors using Function 11 or 12).
+
+properties:
+  compatible:
+    enum:
+      - syna,rmi4-i2c
+      - syna,rmi4-spi
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: Active low signal
+
+  spi-cpha: true
+  spi-cpol: true
+
+  syna,reset-delay-ms:
+    description:
+      Delay to wait after resetting the device.
+
+  syna,startup-delay-ms:
+    description:
+      Delay to wait after powering on the device.
+
+  vdd-supply: true
+  vio-supply: true
+
+  rmi4-f01@1:
+    type: object
+    additionalProperties: false
+    description:
+      Function 1
+
+    properties:
+      reg:
+        maxItems: 1
+
+      syna,nosleep-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          If set the device will run at full power without sleeping.  nosleep
+          has 3 modes, 0 will not change the default setting, 1 will disable
+          nosleep (allow sleeping), and 2 will enable nosleep (disabling
+          sleep).
+
+      syna,wakeup-threshold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Defines the amplitude of the disturbance to the background
+          capacitance that will cause the device to wake from dozing.
+
+      syna,doze-holdoff-ms:
+        description:
+          The delay to wait after the last finger lift and the first doze
+          cycle.
+
+      syna,doze-interval-ms:
+        description:
+          The time period that the device sleeps between finger activity.
+
+    required:
+      - reg
+
+patternProperties:
+  "^rmi4-f1[12]@1[12]$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/input/touchscreen/touchscreen.yaml#
+    description:
+      RMI4 Function 11 and Function 12 are for 2D touch position sensing.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      syna,clip-x-low:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum value for X.
+
+      syna,clip-y-low:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum value for Y.
+
+      syna,clip-x-high:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Maximum value for X.
+
+      syna,clip-y-high:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Maximum value for Y.
+
+      syna,offset-x:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Add an offset to X.
+
+      syna,offset-y:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Add an offset to Y.
+
+      syna,delta-x-threshold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum distance on the X axis required to generate an interrupt in
+          reduced reporting mode.
+
+      syna,delta-y-threshold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum distance on the Y axis required to generate an interrupt in
+          reduced reporting mode.
+
+      syna,sensor-type:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2]
+        description: |
+          Sensor type: 1 for touchscreen 2 for touchpad.
+
+      syna,disable-report-mask:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Mask for disabling posiiton reporting. Used to disable reporing
+          absolute position data.
+
+      syna,rezero-wait-ms:
+        description:
+          Time to wait after issuing a rezero command.
+
+    required:
+      - reg
+
+  "^rmi4-f[0-9a-f]+@[0-9a-f]+$":
+    type: object
+    description:
+      Other functions, not documented yet.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: syna,rmi4-i2c
+    then:
+      properties:
+        spi-rx-delay-us: false
+        spi-tx-delay-us: false
+    else:
+      properties:
+        syna,reset-delay-ms: false
+        syna,startup-delay-ms: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@20 {
+            compatible = "syna,rmi4-i2c";
+            reg = <0x20>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+            syna,startup-delay-ms = <100>;
+            vdd-supply = <&tsp_vdd>;
+            vio-supply = <&ldo32_reg>;
+
+            pinctrl-0 = <&touch_irq>;
+            pinctrl-names = "default";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rmi4-f01@1 {
+                reg = <0x1>;
+                syna,nosleep-mode = <1>;
+            };
+
+            rmi4-f12@12 {
+                reg = <0x12>;
+                syna,sensor-type = <1>;
+            };
+
+            rmi4-f1a@1a {
+                reg = <0x1a>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "syna,rmi4-spi";
+            reg = <0x0>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+            spi-max-frequency = <4000000>;
+            spi-rx-delay-us = <30>;
+            spi-cpha;
+            spi-cpol;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rmi4-f01@1 {
+                reg = <0x1>;
+                syna,nosleep-mode = <1>;
+            };
+
+            rmi4-f11@11 {
+                reg = <0x11>;
+                touchscreen-inverted-y;
+                syna,sensor-type = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
new file mode 100644
index 0000000000..2551850091
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
@@ -0,0 +1,10 @@
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required properties:
+- compatible: "ti,tca8418"
+- reg: the I2C address
+- interrupts: IRQ line number, should trigger on falling edge
+- linux,keymap: Keys definitions, see keypad-matrix.
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.yaml b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
new file mode 100644
index 0000000000..c6245c5b9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv260x Haptics driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2604
+      - ti,drv2605
+      - ti,drv2605l
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Power supply to the haptic motor
+
+  # TODO: Deprecate 'mode' in favor of differently named property
+  mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Power up mode of the chip
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LRA_MODE
+        Linear Resonance Actuator mode (Piezoelectric)
+
+      DRV260X_LRA_NO_CAL_MODE
+        This is a LRA Mode but there is no calibration sequence during init.
+        And the device is configured for real time playback mode (RTP mode).
+
+      DRV260X_ERM_MODE
+        Eccentric Rotating Mass mode (Rotary vibrator)
+    enum: [ 0, 1, 2 ]
+
+  library-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      These are ROM based waveforms pre-programmed into the IC.
+      This should be set to set the library to use at power up.
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+      DRV260X_ERM_LIB_A - Pre-programmed Library
+      DRV260X_ERM_LIB_B - Pre-programmed Library
+      DRV260X_ERM_LIB_C - Pre-programmed Library
+      DRV260X_ERM_LIB_D - Pre-programmed Library
+      DRV260X_ERM_LIB_E - Pre-programmed Library
+      DRV260X_ERM_LIB_F - Pre-programmed Library
+      DRV260X_LIB_LRA - Pre-programmed LRA Library
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+  enable-gpio:
+    maxItems: 1
+    deprecated: true
+
+  enable-gpios:
+    maxItems: 1
+
+  vib-rated-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The rated voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+  vib-overdrive-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The overdrive voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mode
+  - library-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/ti-drv260x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@5a {
+            compatible = "ti,drv2605l";
+            reg = <0x5a>;
+            vbat-supply = <&vbat>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            mode = <DRV260X_LRA_MODE>;
+            library-sel = <DRV260X_LIB_LRA>;
+            vib-rated-mv = <3200>;
+            vib-overdrive-mv = <3200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt
new file mode 100644
index 0000000000..1ba97ac043
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2665.txt
@@ -0,0 +1,17 @@
+* Texas Instruments - drv2665 Haptics driver
+
+Required properties:
+	- compatible - "ti,drv2665" - DRV2665
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+
+Example:
+
+haptics: haptics@59 {
+	compatible = "ti,drv2665";
+	reg = <0x59>;
+	vbat-supply = <&vbat>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2665
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
new file mode 100644
index 0000000000..996382cf99
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt
@@ -0,0 +1,17 @@
+* Texas Instruments - drv2667 Haptics driver
+
+Required properties:
+	- compatible - "ti,drv2667" - DRV2667
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+
+Example:
+
+haptics: haptics@59 {
+	compatible = "ti,drv2667";
+	reg = <0x59>;
+	vbat-supply = <&vbat>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2667
diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
new file mode 100644
index 0000000000..513d94d6e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
@@ -0,0 +1,60 @@
+TI-NSPIRE Keypad
+
+Required properties:
+- compatible: Compatible property value should be "ti,nspire-keypad".
+
+- reg: Physical base address of the peripheral and length of memory mapped
+  region.
+
+- interrupts: The interrupt number for the peripheral.
+
+- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
+	maximum and minimum delay time is ~2000us and ~500us respectively
+
+- row-delay: How long to wait before scanning each row.
+
+- clocks: The clock this peripheral is attached to.
+
+- linux,keymap: The keymap to use
+	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
+
+Optional properties:
+- active-low: Specify that the keypad is active low (i.e. logical low signifies
+	a key press).
+
+Example:
+
+input {
+	compatible = "ti,nspire-keypad";
+	reg = <0x900E0000 0x1000>;
+	interrupts = <16>;
+
+	scan-interval = <1000>;
+	row-delay = <200>;
+
+	clocks = <&apb_pclk>;
+
+	linux,keymap = <
+	0x0000001c	0x0001001c	0x00040039
+	0x0005002c	0x00060015	0x0007000b
+	0x0008000f	0x0100002d	0x01010011
+	0x0102002f	0x01030004	0x01040016
+	0x01050014	0x0106001f	0x01070002
+	0x010a006a	0x02000013	0x02010010
+	0x02020019	0x02030007	0x02040018
+	0x02050031	0x02060032	0x02070005
+	0x02080028	0x0209006c	0x03000026
+	0x03010025	0x03020024	0x0303000a
+	0x03040017	0x03050023	0x03060022
+	0x03070008	0x03080035	0x03090069
+	0x04000021	0x04010012	0x04020020
+	0x0404002e	0x04050030	0x0406001e
+	0x0407000d	0x04080037	0x04090067
+	0x05010038	0x0502000c	0x0503001b
+	0x05040034	0x0505001a	0x05060006
+	0x05080027	0x0509000e	0x050a006f
+	0x0600002b	0x0602004e	0x06030068
+	0x06040003	0x0605006d	0x06060009
+	0x06070001	0x0609000f	0x0708002a
+	0x0709001d	0x070a0033	>;
+};
diff --git a/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
new file mode 100644
index 0000000000..c829e18e1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,palmas-pwrbutton.txt
@@ -0,0 +1,35 @@
+Texas Instruments Palmas family power button module
+
+This module is part of the Palmas family of PMICs. For more details
+about the whole chip see:
+Documentation/devicetree/bindings/mfd/palmas.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "ti,palmas-pwrbutton": For Palmas compatible power on button
+- interrupts: Interrupt number of power button submodule on device.
+
+Optional Properties:
+
+- ti,palmas-long-press-seconds: Duration in seconds which the power
+  button should be kept pressed for Palmas to power off automatically.
+  NOTE: This depends on OTP support and POWERHOLD signal configuration
+  on platform. Valid values are 6, 8, 10 and 12.
+- ti,palmas-pwron-debounce-milli-seconds: Duration in milliseconds
+  which the power button should be kept pressed for Palmas to register
+  a press for debouncing purposes. NOTE: This depends on specific
+  Palmas variation capability. Valid values are 15, 100, 500 and 1000.
+
+Example:
+
+&palmas {
+	palmas_pwr_button: pwrbutton {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps659038>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		ti,palmas-long-press-seconds = <12>;
+		ti,palmas-pwron-debounce-milli-seconds = <15>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
new file mode 100644
index 0000000000..afa38dc069
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
@@ -0,0 +1,71 @@
+* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
+
+Required properties:
+- compatible			: for SPI slave, use "adi,ad7879"
+				  for I2C slave, use "adi,ad7879-1"
+- reg				: SPI chipselect/I2C slave address
+				  See spi-bus.txt for more SPI slave properties
+- interrupts			: touch controller interrupt
+- touchscreen-max-pressure	: maximum reported pressure
+- adi,resistance-plate-x	: total resistance of X-plate (for pressure
+				  calculation)
+Optional properties:
+- touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
+- adi,first-conversion-delay	: 0-12: In 128us steps (starting with 128us)
+				  13  : 2.560ms
+				  14  : 3.584ms
+				  15  : 4.096ms
+				  This property has to be a '/bits/ 8' value
+- adi,acquisition-time		: 0: 2us
+				  1: 4us
+				  2: 8us
+				  3: 16us
+				  This property has to be a '/bits/ 8' value
+- adi,median-filter-size	: 0: disabled
+				  1: 4 measurements
+				  2: 8 measurements
+				  3: 16 measurements
+				  This property has to be a '/bits/ 8' value
+- adi,averaging			: 0: 2 middle values (1 if median disabled)
+				  1: 4 middle values
+				  2: 8 middle values
+				  3: 16 values
+				  This property has to be a '/bits/ 8' value
+- adi,conversion-interval:	: 0    : convert one time only
+				  1-255: 515us + val * 35us (up to 9.440ms)
+				  This property has to be a '/bits/ 8' value
+- gpio-controller		: Switch AUX/VBAT/GPIO pin to GPIO mode
+
+Example:
+
+	touchscreen0@2c {
+		compatible = "adi,ad7879-1";
+		reg = <0x2c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
+
+	touchscreen1@1 {
+		compatible = "adi,ad7879";
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+		spi-cpol;
+		spi-cpha;
+		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
new file mode 100644
index 0000000000..81f6bda97d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
@@ -0,0 +1,106 @@
+Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
+SPI driven touch screen controllers.
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in
+
+	Documentation/devicetree/bindings/spi/spi-bus.txt
+
+must be specified.
+
+Additional required properties:
+
+	compatible		Must be one of the following, depending on the
+				model:
+					"ti,tsc2046"
+					"ti,ads7843"
+					"ti,ads7845"
+					"ti,ads7846"
+					"ti,ads7873"
+
+	interrupts		An interrupt node describing the IRQ line the chip's
+				!PENIRQ pin is connected to.
+	vcc-supply		A regulator node for the supply voltage.
+
+
+Optional properties:
+
+	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
+					external vref (u16).
+	ti,vref-mv			The VREF voltage, in millivolts (u16).
+					Set to 0 to use internal references
+					(ADS7846).
+	ti,keep-vref-on			set to keep vref on for differential
+					measurements as well
+	ti,settle-delay-usec		Settling time of the analog signals;
+					a function of Vcc and the capacitance
+					on the X/Y drivers.  If set to non-zero,
+					two samples are taken with settle_delay
+					us apart, and the second one is used.
+					~150 uSec with 0.01uF caps (u16).
+	ti,penirq-recheck-delay-usecs	If set to non-zero, after samples are
+					taken this delay is applied and penirq
+					is rechecked, to help avoid false
+					events.  This value is affected by the
+					material used to build the touch layer
+					(u16).
+	ti,x-plate-ohms			Resistance of the X-plate,
+					in Ohms (u16).
+	ti,y-plate-ohms			Resistance of the Y-plate,
+					in Ohms (u16).
+	ti,x-min			Minimum value on the X axis (u16).
+	ti,y-min			Minimum value on the Y axis (u16).
+	ti,debounce-tol			Tolerance used for filtering (u16).
+	ti,debounce-rep			Additional consecutive good readings
+					required after the first two (u16).
+	ti,pendown-gpio-debounce	Platform specific debounce time for the
+					pendown-gpio (u32).
+	pendown-gpio			GPIO handle describing the pin the !PENIRQ
+					line is connected to.
+	wakeup-source			use any event on touchscreen as wakeup event.
+					(Legacy property support: "linux,wakeup")
+	touchscreen-size-x		General touchscreen binding, see [1].
+	touchscreen-size-y		General touchscreen binding, see [1].
+	touchscreen-max-pressure	General touchscreen binding, see [1].
+	touchscreen-min-pressure	General touchscreen binding, see [1].
+	touchscreen-average-samples	General touchscreen binding, see [1].
+	touchscreen-inverted-x		General touchscreen binding, see [1].
+	touchscreen-inverted-y		General touchscreen binding, see [1].
+	touchscreen-swapped-x-y		General touchscreen binding, see [1].
+
+[1] All general touchscreen properties are described in
+    Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
+
+Deprecated properties:
+
+	ti,swap-xy			swap x and y axis
+	ti,x-max			Maximum value on the X axis (u16).
+	ti,y-max			Maximum value on the Y axis (u16).
+	ti,pressure-min			Minimum reported pressure value
+					(threshold) - u16.
+	ti,pressure-max			Maximum reported pressure value (u16).
+	ti,debounce-max			Max number of additional readings per
+					sample (u16).
+
+Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
+
+	spi_controller {
+		tsc2046@0 {
+			reg = <0>;	/* CS0 */
+			compatible = "ti,tsc2046";
+			interrupt-parent = <&gpio1>;
+			interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+			spi-max-frequency = <1000000>;
+			pendown-gpio = <&gpio1 8 0>;
+			vcc-supply = <&reg_vcc3>;
+
+			ti,x-min = /bits/ 16 <0>;
+			ti,x-max = /bits/ 16 <8000>;
+			ti,y-min = /bits/ 16 <0>;
+			ti,y-max = /bits/ 16 <4800>;
+			ti,x-plate-ohms = /bits/ 16 <40>;
+			ti,pressure-max = /bits/ 16 <255>;
+
+			wakeup-source;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
new file mode 100644
index 0000000000..82019bd609
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt
@@ -0,0 +1,15 @@
+* Microchip AR1020 and AR1021 touchscreen interface (I2C)
+
+Required properties:
+- compatible		: "microchip,ar1021-i2c"
+- reg			: I2C slave address
+- interrupts		: touch controller interrupt
+
+Example:
+
+	touchscreen@4d {
+		compatible = "microchip,ar1021-i2c";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
new file mode 100644
index 0000000000..b8db975e9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		auo_pixcir_ts@5c {
+			compatible = "auo,auo_pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+				<&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
new file mode 100644
index 0000000000..b5f377215c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers
+  employ projected-capacitance sensing and can track up to five independent
+  contacts.
+
+  Link to datasheet: https://www.azoteq.com/
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs550
+      - azoteq,iqs572
+      - azoteq,iqs525
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touchscreen@74 {
+                    compatible = "azoteq,iqs550";
+                    reg = <0x74>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+                    reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW |
+                                             GPIO_PUSH_PULL)>;
+
+                    touchscreen-size-x = <800>;
+                    touchscreen-size-y = <480>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml
new file mode 100644
index 0000000000..8cf371b99f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml
@@ -0,0 +1,769 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs7211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7210A/7211A/E Trackpad/Touchscreen Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7210A, IQS7211A and IQS7211E trackpad and touchscreen control-
+  lers employ projected-capacitance sensing and can track two contacts.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7210a
+      - azoteq,iqs7211a
+      - azoteq,iqs7211e
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output. The
+      pin doubles as the IQS7211E's active-low MCLR input, in which case this
+      GPIO must be configured as open-drain.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,forced-comms:
+    type: boolean
+    description:
+      Enables forced communication; to be used with host adapters that cannot
+      tolerate clock stretching.
+
+  azoteq,forced-comms-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Indicates if the device's OTP memory enables (1) or disables (0) forced
+      communication by default. Specifying this property can expedite startup
+      time if the default value is known.
+
+      If this property is not specified, communication is not initiated until
+      the device asserts its RDY pin shortly after exiting hardware reset. At
+      that point, forced communication is either enabled or disabled based on
+      the presence or absence of the 'azoteq,forced-comms' property.
+
+  azoteq,rate-active-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during active mode.
+
+  azoteq,rate-touch-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during idle-touch mode.
+
+  azoteq,rate-idle-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during idle mode.
+
+  azoteq,rate-lp1-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during low-power mode 1.
+
+  azoteq,rate-lp2-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during low-power mode 2.
+
+  azoteq,timeout-active-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from active mode to idle or idle-touch modes.
+
+  azoteq,timeout-touch-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from idle-touch mode to idle mode.
+
+  azoteq,timeout-idle-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from idle mode to low-power mode 1.
+
+  azoteq,timeout-lp1-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode 1 to low-power mode 2.
+
+  azoteq,timeout-lp2-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 60000
+    description:
+      Specifies the rate (in ms) at which the trackpad reference values
+      are updated during low-power modes 1 and 2.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 60000
+    description:
+      Specifies the delay (in ms) before the automatic tuning implementation
+      (ATI) is retried in the event it fails to complete.
+
+  azoteq,timeout-comms-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the delay (in ms) before a communication window is closed.
+
+  azoteq,timeout-press-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 60000
+    description:
+      Specifies the length of time (in ms) to wait before automatically
+      releasing a press event. Specify zero to allow the press state to
+      persist indefinitely.
+
+  azoteq,fosc-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Specifies the device's core clock frequency as follows:
+      0: 14 MHz
+      1: 18 MHz
+
+  azoteq,fosc-trim:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description: Specifies the device's core clock frequency trim.
+
+  azoteq,num-contacts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
+    description: Specifies the number of contacts reported by the device.
+
+  azoteq,contact-split:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    description: Specifies the contact (finger) split factor.
+
+  azoteq,trim-x:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    description: Specifies the horizontal trim width.
+
+  azoteq,trim-y:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    description: Specifies the vertical trim height.
+
+  trackpad:
+    type: object
+    description: Represents all channels associated with the trackpad.
+
+    properties:
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the order of the CRx pin(s) associated with the trackpad.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 12
+        items:
+          minimum: 0
+          maximum: 11
+        description:
+          Specifies the order of the CTx pin(s) associated with the trackpad.
+
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 36
+        items:
+          minimum: 0
+          maximum: 255
+        description: |
+          Specifies the channels mapped to each cycle in the following order:
+          Cycle 0, slot 0
+          Cycle 0, slot 1
+          Cycle 1, slot 0
+          Cycle 1, slot 1
+          ...and so on. Specify 255 to disable a given slot.
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the trackpad's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the trackpad's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the trackpad's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the trackpad's ATI compensation divider.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the trackpad's ATI target.
+
+      azoteq,touch-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's touch entrance factor.
+
+      azoteq,touch-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's touch exit factor.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's stationary touch threshold.
+
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's conversion frequency fraction.
+
+    patternProperties:
+      "^event-(tap(-double|-triple)?|hold|palm|swipe-(x|y)-(pos|neg)(-hold)?)$":
+        type: object
+        $ref: ../input.yaml#
+        description:
+          Represents a gesture event reported by the trackpad. In the case of
+          axial gestures, the duration or distance specified in one direction
+          applies to both directions along the same axis.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            minimum: 0
+            maximum: 65535
+            description: Specifies the maximum duration of tap/swipe gestures.
+
+          azoteq,gesture-mid-ms:
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the maximum duration between subsequent tap gestures
+              (IQS7211E only).
+
+          azoteq,gesture-min-ms:
+            minimum: 0
+            maximum: 65535
+            description: Specifies the minimum duration of hold gestures.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the minimum (swipe) or maximum (tap and hold) distance
+              a finger may travel to be considered a gesture.
+
+          azoteq,gesture-dist-rep:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the minimum distance a finger must travel to elicit a
+              repeated swipe gesture (IQS7211E only).
+
+          azoteq,gesture-angle:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 75
+            description:
+              Specifies the maximum angle (in degrees) a finger may travel to
+              be considered a swipe gesture.
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 42
+            description: Specifies the palm gesture threshold (IQS7211E only).
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,rx-enable: ["azoteq,tx-enable"]
+      azoteq,tx-enable: ["azoteq,rx-enable"]
+      azoteq,channel-select: ["azoteq,rx-enable"]
+
+    additionalProperties: false
+
+  alp:
+    type: object
+    $ref: ../input.yaml#
+    description: Represents the alternate low-power channel (ALP).
+
+    properties:
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the CRx pin(s) associated with the ALP in no particular
+          order.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 12
+        items:
+          minimum: 0
+          maximum: 11
+        description:
+          Specifies the CTx pin(s) associated with the ALP in no particular
+          order.
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the ALP's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the ALP's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the ALP's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the ALP's ATI compensation divider.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the ALP's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          Specifies the ALP's ATI mode as follows:
+          0: Partial
+          1: Full
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          Specifies the ALP's sensing mode as follows:
+          0: Self capacitive
+          1: Mutual capacitive
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's debounce exit factor.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the ALP's proximity or touch threshold.
+
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's conversion frequency fraction.
+
+      linux,code: true
+
+    additionalProperties: false
+
+  button:
+    type: object
+    description: Represents the inductive or capacitive button.
+
+    properties:
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the button's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the button's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the button's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the button's ATI compensation divider.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the button's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          Specifies the button's ATI mode as follows:
+          0: Partial
+          1: Full
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description: |
+          Specifies the button's sensing mode as follows:
+          0: Self capacitive
+          1: Mutual capacitive
+          2: Inductive
+
+      azoteq,touch-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's touch entrance factor.
+
+      azoteq,touch-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's touch exit factor.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's debounce exit factor.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the button's proximity threshold.
+
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's conversion frequency fraction.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: ../input.yaml#
+        description:
+          Represents a proximity or touch event reported by the button.
+
+        properties:
+          linux,code: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+  wakeup-source: true
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+dependencies:
+  touchscreen-size-x: ["azoteq,num-contacts"]
+  touchscreen-size-y: ["azoteq,num-contacts"]
+  touchscreen-inverted-x: ["azoteq,num-contacts"]
+  touchscreen-inverted-y: ["azoteq,num-contacts"]
+  touchscreen-swapped-x-y: ["azoteq,num-contacts"]
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7210a
+
+    then:
+      properties:
+        alp:
+          properties:
+            azoteq,rx-enable:
+              maxItems: 4
+              items:
+                minimum: 4
+
+    else:
+      properties:
+        azoteq,timeout-press-ms: false
+
+        alp:
+          properties:
+            azoteq,ati-mode: false
+
+        button: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7211e
+
+    then:
+      properties:
+        reset-gpios: false
+
+        trackpad:
+          properties:
+            azoteq,tx-enable:
+              maxItems: 13
+              items:
+                maximum: 12
+
+        alp:
+          properties:
+            azoteq,tx-enable:
+              maxItems: 13
+              items:
+                maximum: 12
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touch@56 {
+                    compatible = "azoteq,iqs7210a";
+                    reg = <0x56>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    reset-gpios = <&gpio 17 (GPIO_ACTIVE_LOW |
+                                             GPIO_PUSH_PULL)>;
+                    azoteq,num-contacts = <2>;
+
+                    trackpad {
+                            azoteq,rx-enable = <6>, <5>, <4>, <3>, <2>;
+                            azoteq,tx-enable = <1>, <7>, <8>, <9>, <10>;
+                    };
+
+                    button {
+                            azoteq,sense-mode = <2>;
+                            azoteq,touch-enter = <40>;
+                            azoteq,touch-exit = <36>;
+
+                            event-touch {
+                                    linux,code = <KEY_HOME>;
+                            };
+                    };
+
+                    alp {
+                            azoteq,sense-mode = <1>;
+                            linux,code = <KEY_POWER>;
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touch@56 {
+                    compatible = "azoteq,iqs7211e";
+                    reg = <0x56>;
+                    irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW |
+                                          GPIO_OPEN_DRAIN)>;
+
+                    trackpad {
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                            };
+
+                            event-tap-double {
+                                    linux,code = <KEY_SHUFFLE>;
+                            };
+
+                            event-tap-triple {
+                                    linux,code = <KEY_AGAIN>;
+                            };
+
+                            event-hold {
+                                    linux,code = <KEY_STOP>;
+                            };
+
+                            event-palm {
+                                    linux,code = <KEY_EXIT>;
+                            };
+
+                            event-swipe-x-pos {
+                                    linux,code = <KEY_REWIND>;
+                            };
+
+                            event-swipe-x-pos-hold {
+                                    linux,code = <KEY_PREVIOUS>;
+                            };
+
+                            event-swipe-x-neg {
+                                    linux,code = <KEY_FASTFORWARD>;
+                            };
+
+                            event-swipe-x-neg-hold {
+                                    linux,code = <KEY_NEXT>;
+                            };
+
+                            event-swipe-y-pos {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+
+                            event-swipe-y-pos-hold {
+                                    linux,code = <KEY_MUTE>;
+                            };
+
+                            event-swipe-y-neg {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+
+                            event-swipe-y-neg-hold {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
new file mode 100644
index 0000000000..f127a21170
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -0,0 +1,87 @@
+* Broadcom's IPROC Touchscreen Controller
+
+Required properties:
+- compatible: must be "brcm,iproc-touchscreen"
+- ts_syscon: handler of syscon node defining physical base
+  address of the controller and length of memory mapped region.
+  If this property is selected please make sure MFD_SYSCON config
+  is enabled in the defconfig file.
+- clocks:  The clock provided by the SOC to driver the tsc
+- clock-names:  name for the clock
+- interrupts: The touchscreen controller's interrupt
+- address-cells: Specify the number of u32 entries needed in child nodes.
+  Should set to 1.
+- size-cells: Specify number of u32 entries needed to specify child nodes size
+  in reg property. Should set to 1.
+
+Optional properties:
+- scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
+- debounce_timeout: Each step is 512 us.  Valid 0-255
+- settling_timeout: The settling duration (in ms) is the amount of time
+                    the tsc waits to allow the voltage to settle after
+                    turning on the drivers in detection mode.
+                    Valid values: 0-11
+                    0 =  0.008 ms
+                    1 =  0.01 ms
+                    2 =  0.02 ms
+                    3 =  0.04 ms
+                    4 =  0.08 ms
+                    5 =  0.16 ms
+                    6 =  0.32 ms
+                    7 =  0.64 ms
+                    8 =  1.28 ms
+                    9 =  2.56 ms
+                   10 =  5.12 ms
+                   11 = 10.24 ms
+- touch_timeout: The continuous number of scan periods in which touch is
+                not detected before the controller returns to idle state.
+                Valid values 0-255.
+- average_data: Number of data samples which are averaged before a final
+                data point is placed into the FIFO
+                Valid values 0-7
+                0 =   1 sample
+                1 =   2 samples
+                2 =   4 samples
+                3 =   8 samples
+                4 =  16 samples
+                5 =  32 samples
+                6 =  64 samples
+                7 = 128 samples
+- fifo_threshold: Interrupt is generated whenever the number of fifo
+                entries exceeds this value
+                Valid values 0-31
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+- touchscreen-fuzz-x: horizontal noise value of the absolute input
+                      device (in pixels)
+- touchscreen-fuzz-y: vertical noise value of the absolute input
+                      device (in pixels)
+- touchscreen-inverted-x: X axis is inverted (boolean)
+- touchscreen-inverted-y: Y axis is inverted (boolean)
+
+Example: An example of touchscreen node
+
+	ts_adc_syscon: ts_adc_syscon@180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	touchscreen: touchscreen@180a6000 {
+		compatible = "brcm,iproc-touchscreen";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ts_syscon = <&ts_adc_syscon>;
+		clocks = <&adc_clk>;
+		clock-names = "tsc_clk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+		scanning_period = <5>;
+		debounce_timeout = <40>;
+		settling_timeout = <7>;
+		touch_timeout = <10>;
+		average_data = <5>;
+		fifo_threshold = <1>;
+		/* Touchscreen is rotated 180 degrees. */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 0000000000..da4c9d8b99
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,43 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible              : "rohm,bu21013_tp"
+ - reg                     : I2C device address
+ - reset-gpios             : GPIO pin enabling (selecting) chip (CS)
+ - interrupt-parent        : the phandle for the gpio controller
+ - interrupts              : (gpio) interrupt to which the chip is connected
+
+Optional properties:
+ - touch-gpios             : GPIO pin registering a touch event
+ - <supply_name>-supply    : Phandle to a regulator supply
+ - touchscreen-size-x      : General touchscreen binding, see [1].
+ - touchscreen-size-y      : General touchscreen binding, see [1].
+ - touchscreen-inverted-x  : General touchscreen binding, see [1].
+ - touchscreen-inverted-y  : General touchscreen binding, see [1].
+ - touchscreen-swapped-x-y : General touchscreen binding, see [1].
+
+[1] All general touchscreen properties are described in
+    Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
+
+Deprecated properties:
+ - rohm,touch-max-x        : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y        : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x             : Flip touch coordinates on the X axis
+ - rohm,flip-y             : Flip touch coordinates on the Y axis
+
+Example:
+
+	i2c@80110000 {
+		bu21013_tp@5c {
+			compatible = "rohm,bu21013_tp";
+			reg = <0x5c>;
+			interrupt-parent = <&gpio2>;
+			interrupts <&20 IRQ_TYPE_LEVEL_LOW>;
+			touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+			touchscreen-size-x = <384>;
+			touchscreen-size-y = <704>;
+			touchscreen-inverted-y;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
new file mode 100644
index 0000000000..8daa0e868a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt
@@ -0,0 +1,35 @@
+* Rohm BU21029 Touch Screen Controller
+
+Required properties:
+ - compatible              : must be "rohm,bu21029"
+ - reg                     : i2c device address of the chip (0x40 or 0x41)
+ - interrupt-parent        : the phandle for the gpio controller
+ - interrupts              : (gpio) interrupt to which the chip is connected
+ - rohm,x-plate-ohms       : x-plate resistance in Ohm
+
+Optional properties:
+ - reset-gpios             : gpio pin to reset the chip (active low)
+ - touchscreen-size-x      : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y      : vertical resolution of touchscreen (in pixels)
+ - touchscreen-max-pressure: maximum pressure value
+ - vdd-supply              : power supply for the controller
+
+Example:
+
+	&i2c1 {
+		/* ... */
+
+		bu21029: bu21029@40 {
+			compatible = "rohm,bu21029";
+			reg = <0x40>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			rohm,x-plate-ohms = <600>;
+			touchscreen-size-x = <800>;
+			touchscreen-size-y = <480>;
+			touchscreen-max-pressure = <4095>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
new file mode 100644
index 0000000000..74a8a01e07
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipOne ICN8318 Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: chipone,icn8318
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - wake-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "chipone,icn8318";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+            pinctrl-names = "default";
+            pinctrl-0 = <&ts_wake_pin_p66>;
+            wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <480>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
new file mode 100644
index 0000000000..ca304357c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -0,0 +1,34 @@
+* Toradex Colibri VF50 Touchscreen driver
+
+Required Properties:
+- compatible must be toradex,vf50-touchscreen
+- io-channels: adc channels being used by the Colibri VF50 module
+    IIO ADC for Y-, X-, Y+, X+ connections
+- xp-gpios: FET gate driver for input of X+
+- xm-gpios: FET gate driver for input of X-
+- yp-gpios: FET gate driver for input of Y+
+- ym-gpios: FET gate driver for input of Y-
+- interrupts: pen irq interrupt for touch detection, signal from X plate
+- pinctrl-names: "idle", "default"
+- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
+    pull-up resistor on X+, X-.
+- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
+- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
+
+Example:
+
+	touchctrl: vf50_touchctrl {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
new file mode 100644
index 0000000000..86a6d18f95
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA140 series touchscreen controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: cypress,cy8ctma140
+
+  reg:
+    const: 0x20
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+  vcpin-supply:
+    description: Analog power supply regulator on VCPIN pin
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+  touchscreen-max-pressure: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+  - touchscreen-max-pressure
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@20 {
+        compatible = "cypress,cy8ctma140";
+        reg = <0x20>;
+        touchscreen-size-x = <480>;
+        touchscreen-size-y = <800>;
+        touchscreen-max-pressure = <255>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ab8500_ldo_aux2_reg>;
+        vcpin-supply = <&ab8500_ldo_aux2_reg>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
new file mode 100644
index 0000000000..4dfbb93678
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8CTMA340 series touchscreen controller
+
+description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
+  the marketing name Cypress TrueTouch Standard Product) touchscreens can
+  be connected to either I2C or SPI buses.
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    oneOf:
+      - const: cypress,cy8ctma340
+      - const: cypress,cy8ctst341
+      - const: cypress,cyttsp-spi
+        description: Legacy compatible for SPI connected CY8CTMA340
+        deprecated: true
+      - const: cypress,cyttsp-i2c
+        description: Legacy compatible for I2C connected CY8CTMA340
+        deprecated: true
+
+  reg:
+    description: I2C address when used on the I2C bus, or the SPI chip
+      select index when used on the SPI bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  spi-max-frequency:
+    description: SPI clock frequency, defined for host, defined when using
+      the device on the SPI bus. The throughput is maximum 2 Mbps so the
+      typical value is 2000000, if higher rates are used the total throughput
+      needs to be restricted to 2 Mbps.
+    minimum: 0
+    maximum: 6000000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcpin-supply:
+    description: Analog power supply regulator on VCPIN pin
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  bootloader-key:
+    description: the 8-byte bootloader key that is required to switch
+      the chip from bootloader mode (default mode) to application mode
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 8
+    maxItems: 8
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+  active-distance:
+    description: the distance in pixels beyond which a touch must move
+      before movement is detected and reported by the device
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  active-interval-ms:
+    description: the minimum period in ms between consecutive
+      scanning/processing cycles when the chip is in active mode
+    minimum: 0
+    maximum: 255
+
+  lowpower-interval-ms:
+    description: the minimum period in ms between consecutive
+      scanning/processing cycles when the chip is in low-power mode
+    minimum: 0
+    maximum: 2550
+
+  touch-timeout-ms:
+    description: minimum time in ms spent in the active power state while no
+      touches are detected before entering low-power mode
+    minimum: 0
+    maximum: 2550
+
+  use-handshake:
+    description: enable register-based handshake (boolean). This should only
+      be used if the chip is configured to use 'blocking communication with
+      timeout' (in this case the device generates an interrupt at the end of
+      every scanning/processing cycle)
+    $ref: /schemas/types.yaml#/definitions/flag
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - bootloader-key
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+      touchscreen@0 {
+        compatible = "cypress,cy8ctma340";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+        vdd-supply = <&ldo_aux1_reg>;
+        vcpin-supply = <&ldo_aux2_reg>;
+        bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+        touchscreen-size-x = <480>;
+        touchscreen-size-y = <800>;
+        active-interval-ms = <0>;
+        touch-timeout-ms = <255>;
+        lowpower-interval-ms = <10>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
new file mode 100644
index 0000000000..4080422a9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress TT21000 touchscreen controller
+
+description: The Cypress TT21000 series (also known as "CYTTSP5" after
+  the marketing name Cypress TrueTouch Standard Product series 5).
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: cypress,tt21000
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for voltage.
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,keycodes:
+    description: EV_ABS specific event code generated by the axis.
+
+  wakeup-source: true
+
+patternProperties:
+  "^button@[0-9]+$":
+    type: object
+    $ref: ../input.yaml#
+    properties:
+      reg:
+        maxItems: 1
+      linux,keycodes:
+        description: Keycode to emit
+
+    required:
+      - reg
+      - linux,keycodes
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@24 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "cypress,tt21000";
+            reg = <0x24>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tp_reset_ds203>;
+            interrupt-parent = <&pio>;
+            interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg_touch>;
+
+            button@0 {
+                reg = <0>;
+                linux,keycodes = <KEY_HOMEPAGE>;
+            };
+
+            button@1 {
+                reg = <1>;
+                linux,keycodes = <KEY_MENU>;
+            };
+
+            button@2 {
+                reg = <2>;
+                linux,keycodes = <KEY_BACK>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
new file mode 100644
index 0000000000..f2808cb4d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FocalTech EDT-FT5x06 Polytouch
+
+description: |
+             There are 5 variants of the chip for various touch panel sizes
+              FT5206GE1  2.8" .. 3.8"
+              FT5306DE4  4.3" .. 7"
+              FT5406EE8  7"   .. 8.9"
+              FT5506EEG  7"   .. 8.9"
+              FT5726NEI  5.7” .. 11.6"
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - evervision,ev-ft5726
+
+    then:
+      properties:
+        offset-x: true
+        offset-y: true
+
+properties:
+  compatible:
+    enum:
+      - edt,edt-ft5206
+      - edt,edt-ft5306
+      - edt,edt-ft5406
+      - edt,edt-ft5506
+      - evervision,ev-ft5726
+      - focaltech,ft6236
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply: true
+  iovcc-supply: true
+
+  gain:
+    description: Allows setting the sensitivity in the range from 0 to 31.
+                 Note that lower values indicate higher sensitivity.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  offset:
+    description: Allows setting the edge compensation in the range from 0 to 31.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  offset-x:
+    description: Same as offset, but applies only to the horizontal position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 80
+
+  offset-y:
+    description: Same as offset, but applies only to the vertical position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 80
+
+  report-rate-hz:
+    description: |
+                 Allows setting the scan rate in Hertz.
+                  M06 supports range from 30 to 140 Hz.
+                  M12 supports range from 1 to 255 Hz.
+    minimum: 1
+    maximum: 255
+
+  threshold:
+    description: Allows setting the  "click"-threshold in the range from 0 to 255.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      edt-ft5x06@38 {
+        compatible = "edt,edt-ft5406";
+        reg = <0x38>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
new file mode 100644
index 0000000000..9dc25d30a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EETI EXC3000 series touchscreen controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - eeti,exc3000
+      - eeti,exc80h60
+      - eeti,exc80h84
+  reg:
+    const: 0x2a
+  interrupts:
+    maxItems: 1
+  reset-gpios:
+    maxItems: 1
+  vdd-supply:
+    description: Power supply regulator for the chip
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/interrupt-controller/irq.h"
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@2a {
+                compatible = "eeti,exc3000";
+                reg = <0x2a>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+                touchscreen-size-x = <4096>;
+                touchscreen-size-y = <4096>;
+                touchscreen-inverted-x;
+                touchscreen-swapped-x-y;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
new file mode 100644
index 0000000000..32b3712c91
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
@@ -0,0 +1,30 @@
+Bindings for EETI touchscreen controller
+
+Required properties:
+- compatible:	should be "eeti,exc3000-i2c"
+- reg:		I2C address of the chip. Should be set to <0xa>
+- interrupts:	interrupt to which the chip is connected
+
+Optional properties:
+- attn-gpios:	A handle to a GPIO to check whether interrupt is still
+		latched. This is necessary for platforms that lack
+		support for level-triggered IRQs.
+
+The following optional properties described in touchscreen.txt are
+also supported:
+
+- touchscreen-inverted-x
+- touchscreen-inverted-y
+- touchscreen-swapped-x-y
+
+Example:
+
+i2c-master {
+	touchscreen@a {
+		compatible = "eeti,exc3000-i2c";
+		reg = <0xa>;
+		interrupt-parent = <&gpio>;
+		interrupts = <123 IRQ_TYPE_EDGE_RISING>;
+		attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 0000000000..ebbe938105
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,18 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  and also used as irq pin
+
+Example:
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
new file mode 100644
index 0000000000..c9f2c9f578
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -0,0 +1,25 @@
+* Elan eKTF2127 I2C touchscreen controller
+
+Required properties:
+ - compatible		  : "elan,ektf2127" or "elan,ektf2132"
+ - reg			  : I2C slave address of the chip (0x40)
+ - interrupts		  : interrupt specification for the ektf2127 interrupt
+ - power-gpios		  : GPIO specification for the pin connected to the
+			    ektf2127's wake input. This needs to be driven high
+			    to take ektf2127 out of its low power state
+
+For additional optional properties see: touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+	ektf2127: touchscreen@15 {
+		compatible = "elan,ektf2127";
+		reg = <0x15>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
new file mode 100644
index 0000000000..3255c2c895
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elantech I2C Touchscreen
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - elan,ektf3624
+          - elan,ekth3500
+      - items:
+          - const: elan,ekth3915
+          - const: elan,ekth3500
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchscreen can be used as a wakeup source.
+
+  reset-gpios:
+    maxItems: 1
+    description: reset gpio the chip is connected to.
+
+  vcc33-supply:
+    description: a phandle for the regulator supplying 3.3V power.
+
+  vccio-supply:
+    description: a phandle for the regulator supplying IO power.
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@10 {
+            compatible = "elan,ekth3500";
+            reg = <0x10>;
+
+            interrupt-parent = <&gpio4>;
+            interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
new file mode 100644
index 0000000000..99d6f9d253
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
@@ -0,0 +1,34 @@
+Freescale mx25 TS conversion queue module
+
+mx25 touchscreen conversion queue module which controls the ADC unit of the
+mx25 for attached touchscreens.
+
+Required properties:
+ - compatible: Should be "fsl,imx25-tcq".
+ - reg: Memory range of the device.
+ - interrupts: Should be the interrupt number associated with this module within
+   the tscadc unit (<0>).
+ - fsl,wires: Should be '<4>' or '<5>'
+
+Optional properties:
+ - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
+ - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
+   between 1 and 4096. It is the ratio between the internal reference voltage
+   and the measured voltage after the plate was precharged. Resistance between
+   plates and therefore the voltage decreases with pressure so that a smaller
+   value is equivalent to a higher pressure.
+ - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
+   the actual touch detection to wait for an even charge distribution in the
+   plate.
+
+This device includes two conversion queues which can be added as subnodes.
+The first queue is for the touchscreen, the second for general purpose ADC.
+
+Example:
+	tsc: tcq@50030400 {
+		compatible = "fsl,imx25-tcq";
+		reg = <0x50030400 0x60>;
+		interrupt-parent = <&tscadc>;
+		interrupts = <0>;
+		fsl,wires = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
new file mode 100644
index 0000000000..3d016b87c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT9xx series touchscreen controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt1151
+      - goodix,gt1158
+      - goodix,gt5663
+      - goodix,gt5688
+      - goodix,gt911
+      - goodix,gt9110
+      - goodix,gt912
+      - goodix,gt9147
+      - goodix,gt917s
+      - goodix,gt927
+      - goodix,gt9271
+      - goodix,gt928
+      - goodix,gt9286
+      - goodix,gt967
+
+  reg:
+    enum: [ 0x5d, 0x14 ]
+
+  interrupts:
+    maxItems: 1
+
+  irq-gpios:
+    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
+      as output to reset the device.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  AVDD28-supply:
+    description: Analog power supply regulator on AVDD28 pin
+
+  VDDIO-supply:
+    description: GPIO power supply regulator on VDDIO pin
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gt928@5d {
+        compatible = "goodix,gt928";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <0 0>;
+        irq-gpios = <&gpio1 0 0>;
+        reset-gpios = <&gpio1 1 0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
new file mode 100644
index 0000000000..a47c36190b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt
@@ -0,0 +1,41 @@
+* HiDeep Finger and Stylus touchscreen controller
+
+Required properties:
+- compatible		: must be "hideep,hideep-ts"
+- reg			: I2C slave address, (e.g. 0x6C).
+- interrupts : Interrupt to which the chip is connected.
+
+Optional properties:
+- vdd-supply	: It is the controller supply for controlling
+					 main voltage(3.3V) through the regulator.
+- vid-supply	: It is the controller supply for controlling
+					IO voltage(1.8V) through the regulator.
+- reset-gpios	: Define for reset gpio pin.
+						It is to use for reset IC.
+- touchscreen-size-x	: X axis size of touchscreen
+- touchscreen-size-y	: Y axis size of touchscreen
+- linux,keycodes	: Specifies an array of numeric keycode values to
+			be used for reporting button presses. The array can
+			contain up to 3 entries.
+
+Example:
+
+#include "dt-bindings/input/input.h"
+
+i2c@00000000 {
+
+	/* ... */
+
+	touchscreen@6c {
+		compatible = "hideep,hideep-ts";
+		reg = <0x6c>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&ldo15_reg>;
+		vid-supply = <&ldo18_reg>;
+		reset-gpios = <&gpx1 5 0>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		linux,keycodes = <KEY_HOME>, <KEY_MENU>, <KEY_BACK>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
new file mode 100644
index 0000000000..f42b23d532
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax hx83112b touchscreen controller
+
+maintainers:
+  - Job Noorman <job@noorman.info>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - himax,hx83112b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@48 {
+        compatible = "himax,hx83112b";
+        reg = <0x48>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+        touchscreen-size-x = <1080>;
+        touchscreen-size-y = <2160>;
+        reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
new file mode 100644
index 0000000000..874c0781c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hycon HY46XX series touchscreen controller
+
+description: |
+  There are 6 variants of the chip for various touch panel sizes and cover lens material
+   Glass: 0.3mm--4.0mm
+    PET/PMMA: 0.2mm--2.0mm
+    HY4613(B)-N048  < 6"
+    HY4614(B)-N068  7" .. 10.1"
+    HY4621-NS32  < 5"
+    HY4623-NS48  5.1" .. 7"
+   Glass: 0.3mm--8.0mm
+    PET/PMMA: 0.2mm--4.0mm
+    HY4633(B)-N048  < 6"
+    HY4635(B)-N048  < 7" .. 10.1"
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hycon,hy4613
+      - hycon,hy4614
+      - hycon,hy4621
+      - hycon,hy4623
+      - hycon,hy4633
+      - hycon,hy4635
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+  hycon,threshold:
+    description: Allows setting the sensitivity in the range from 0 to 255.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  hycon,glove-enable:
+    type: boolean
+    description: Allows enabling glove setting.
+
+  hycon,report-speed-hz:
+    description: Allows setting the report speed in Hertz.
+    minimum: 1
+    maximum: 255
+
+  hycon,noise-filter-enable:
+    type: boolean
+    description: Allows enabling power noise filter.
+
+  hycon,filter-data:
+    description: Allows setting how many samples throw before reporting touch
+                 in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  hycon,gain:
+    description: Allows setting the sensitivity distance in the range from 0 to 5.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+  hycon,edge-offset:
+    description: Allows setting the edge compensation in the range from 0 to 16.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 16
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1c {
+        compatible = "hycon,hy4633";
+        reg = <0x1c>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
new file mode 100644
index 0000000000..9cb5d4af00
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cstxxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hynitron cstxxx series touchscreen controller
+
+description: |
+  Bindings for Hynitron cstxxx series multi-touch touchscreen
+  controllers.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hynitron,cst340
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1a {
+        compatible = "hynitron,cst340";
+        reg = <0x1a>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+        touchscreen-size-x = <640>;
+        touchscreen-size-y = <480>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
new file mode 100644
index 0000000000..9f73289997
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek I2C Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili210x
+      - ilitek,ili2117
+      - ilitek,ili2120
+      - ilitek,ili2130
+      - ilitek,ili2131
+      - ilitek,ili2132
+      - ilitek,ili2316
+      - ilitek,ili2322
+      - ilitek,ili2323
+      - ilitek,ili2326
+      - ilitek,ili251x
+      - ilitek,ili2520
+      - ilitek,ili2521
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchscreen can be used as a wakeup source.
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@41 {
+            compatible = "ilitek,ili2520";
+            reg = <0x41>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+            touchscreen-inverted-y;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 0000000000..0d6b033fd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - imagis,ist3038c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@50 {
+        compatible = "imagis,ist3038c";
+        reg = <0x50>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ldo1_reg>;
+        vddio-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
new file mode 100644
index 0000000000..1649150044
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
@@ -0,0 +1,38 @@
+* Freescale i.MX6UL Touch Controller
+
+Required properties:
+- compatible: must be "fsl,imx6ul-tsc".
+- reg: this touch controller address and the ADC2 address.
+- interrupts: the interrupt of this touch controller and ADC2.
+- clocks: the root clock of touch controller and ADC2.
+- clock-names; must be "tsc" and "adc".
+- xnur-gpio: the X- gpio this controller connect to.
+  This xnur-gpio returns to low once the finger leave the touch screen (The
+  last touch event the touch controller capture).
+
+Optional properties:
+- measure-delay-time: the value of measure delay time.
+  Before X-axis or Y-axis measurement, the screen need some time before
+  even potential distribution ready.
+  This value depends on the touch screen.
+- pre-charge-time: the touch screen need some time to precharge.
+  This value depends on the touch screen.
+- touchscreen-average-samples: Number of data samples which are averaged for
+  each read. Valid values are 1, 4, 8, 16 and 32.
+
+Example:
+	tsc: tsc@2040000 {
+		compatible = "fsl,imx6ul-tsc";
+		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6UL_CLK_IPG>,
+			 <&clks IMX6UL_CLK_ADC2>;
+		clock-names = "tsc", "adc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc>;
+		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		measure-delay-time = <0xfff>;
+		pre-charge-time = <0xffff>;
+		touchscreen-average-samples = <32>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
new file mode 100644
index 0000000000..41cbf4b7a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC Touchscreen Controller (TSC)
+
+Required properties:
+- compatible: must be "nxp,lpc3220-tsc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The TSC/ADC interrupt
+
+Example:
+
+	tsc@40048000 {
+		compatible = "nxp,lpc3220-tsc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 0>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
new file mode 100644
index 0000000000..05e982c345
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
@@ -0,0 +1,17 @@
+* MAXI MAX11801 Resistive touch screen controller with i2c interface
+
+Required properties:
+- compatible: must be "maxim,max11801"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+
+Example:
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
new file mode 100644
index 0000000000..07f9dd6b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Melfas MMS114 family touchscreen controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    items:
+      - enum:
+          - melfas,mms114
+          - melfas,mms134s
+          - melfas,mms136
+          - melfas,mms152
+          - melfas,mms345l
+
+  reg:
+    description: I2C address
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply regulator on AVDD pin
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-fuzz-pressure: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  touchscreen-max-pressure: true
+
+  linux,keycodes:
+    description: Keycodes for the touch keys
+    minItems: 1
+    maxItems: 15
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@48 {
+        compatible = "melfas,mms114";
+        reg = <0x48>;
+        interrupt-parent = <&gpio>;
+        interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+        avdd-supply = <&ldo1_reg>;
+        vdd-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-fuzz-pressure = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
new file mode 100644
index 0000000000..b2ab5498e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
@@ -0,0 +1,20 @@
+* MELFAS MIP4 Touchscreen
+
+Required properties:
+- compatible: must be "melfas,mip4_ts"
+- reg: I2C slave address of the chip (0x48 or 0x34)
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
+
+Example:
+	i2c@00000000 {
+		touchscreen: melfas_mip4@48 {
+			compatible = "melfas,mip4_ts";
+			reg = <0x48>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+			ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
new file mode 100644
index 0000000000..ddbbc820c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar msg2638 touchscreen controller
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mstar,msg2138
+      - mstar,msg2638
+
+  reg:
+    const: 0x26
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@26 {
+        compatible = "mstar,msg2638";
+        reg = <0x26>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&ts_int_reset_default>;
+        vdd-supply = <&pm8916_l17>;
+        vddio-supply = <&pm8916_l5>;
+        touchscreen-size-x = <2048>;
+        touchscreen-size-y = <2048>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
new file mode 100644
index 0000000000..3305eda5ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pixcir Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pixcir,pixcir_ts
+      - pixcir,pixcir_tangoc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  attb-gpio:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - attb-gpio
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@5c {
+            compatible = "pixcir,pixcir_ts";
+            reg = <0x5c>;
+            interrupts = <2 0>;
+            attb-gpio = <&gpf 2 0 2>;
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <600>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt
new file mode 100644
index 0000000000..2a1af240cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt
@@ -0,0 +1,26 @@
+Raspberry Pi firmware based 7" touchscreen
+=====================================
+
+Required properties:
+ - compatible: "raspberrypi,firmware-ts"
+
+Optional properties:
+ - firmware: Reference to RPi's firmware device node
+ - touchscreen-size-x: See touchscreen.txt
+ - touchscreen-size-y: See touchscreen.txt
+ - touchscreen-inverted-x: See touchscreen.txt
+ - touchscreen-inverted-y: See touchscreen.txt
+ - touchscreen-swapped-x-y: See touchscreen.txt
+
+Example:
+
+firmware: firmware-rpi {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+
+	ts: touchscreen {
+		compatible = "raspberrypi,firmware-ts";
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
new file mode 100644
index 0000000000..7fc22a403d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic resistive touchscreen ADC
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Generic ADC based resistive touchscreen controller
+  The device must be connected to an ADC device that provides channels for
+  position measurement and optional pressure.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: resistive-adc-touch
+
+  io-channels:
+    minItems: 2
+    items:
+      - description: x
+      - description: y
+      - description: pressure (optional)
+      - description: z1 (optional)
+      - description: z2 (optional)
+
+  io-channel-names:
+    oneOf:
+      - items:
+          - enum: [x, y]
+          - enum: [x, y]
+      - items:
+          - enum: [x, y, pressure]
+          - enum: [x, y, pressure]
+          - enum: [x, y, pressure]
+      - items:
+          - enum: [x, y, z1, z2]
+          - enum: [x, y, z1, z2]
+          - enum: [x, y, z1, z2]
+          - enum: [x, y, z1, z2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  touchscreen-min-pressure: true
+  touchscreen-x-plate-ohms: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+examples:
+  - |
+    touchscreen {
+      compatible = "resistive-adc-touch";
+      io-channels = <&adc 24>, <&adc 25>;
+      io-channel-names = "y", "x";
+    };
+  - |
+    touchscreen {
+      compatible = "resistive-adc-touch";
+      touchscreen-min-pressure = <50000>;
+      io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
+      io-channel-names = "y", "pressure", "x";
+    };
+  - |
+    touchscreen {
+      compatible = "resistive-adc-touch";
+      touchscreen-min-pressure = <50000>;
+      io-channels = <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+      io-channel-names = "x", "z1", "z2", "y";
+      touchscreen-x-plate-ohms = <800>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
new file mode 100644
index 0000000000..6805d10d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
@@ -0,0 +1,32 @@
+* Samsung S6SY761 touchscreen controller
+
+Required properties:
+- compatible		: must be "samsung,s6sy761"
+- reg			: I2C slave address, (e.g. 0x48)
+- interrupts		: interrupt specification
+- avdd-supply		: analogic power supply
+- vdd-supply		: power supply
+
+Optional properties:
+- touchscreen-size-x	: see touchscreen.txt. This property is embedded in the
+			  device. If defined it forces a different x resolution.
+- touchscreen-size-y	: see touchscreen.txt. This property is embedded in the
+			  device. If defined it forces a different y resolution.
+
+Example:
+
+i2c@00000000 {
+
+	/* ... */
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
new file mode 100644
index 0000000000..95b554be25
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silead GSL1680 Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - silead,gsl1680
+      - silead,gsl1688
+      - silead,gsl3670
+      - silead,gsl3675
+      - silead,gsl3692
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: >
+      File basename for board specific firmware
+
+  silead,max-fingers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 5
+    description: >
+      Maximum number of fingers the touchscreen can detect
+
+  silead,home-button:
+    type: boolean
+    description: >
+      Does the device have a capacitive home-button build into the
+      touchscreen?
+
+  avdd-supply:
+    description: >
+      Regulator phandle for controller AVDD
+
+  vddio-supply:
+    description: >
+      Regulator phandle for controller VDDIO
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "silead,gsl1680";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-size-x = <480>;
+            touchscreen-size-y = <800>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+            silead,max-fingers = <5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
new file mode 100644
index 0000000000..8f5322e010
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt
@@ -0,0 +1,31 @@
+* SiS I2C Multiple Touch Controller
+
+Required properties:
+- compatible: must be "sis,9200-ts"
+- reg: i2c slave address
+- interrupts: touch controller interrupt (see interrupt
+  binding [0])
+
+Optional properties:
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the
+  device (see pinctrl binding [1]).
+- attn-gpios: the gpio pin used as attention line
+- reset-gpios: the gpio pin used to reset the controller
+- wakeup-source: touchscreen can be used as a wakeup source
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+
+	sis9255@5c  {
+		compatible = "sis,9200-ts";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sis>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
new file mode 100644
index 0000000000..1d8ca19fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/sitronix,st1232.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix st1232 or st1633 touchscreen controller
+
+maintainers:
+  - Bastian Hecht <hechtb@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sitronix,st1232
+      - sitronix,st1633
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    description: A phandle to the reset GPIO
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touchscreen@55 {
+                    compatible = "sitronix,st1232";
+                    reg = <0x55>;
+                    interrupts = <2 0>;
+                    gpios = <&gpio1 166 0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
new file mode 100644
index 0000000000..c593ae63d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/st,stmfts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Microelectronics FingerTip touchscreen controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The ST-Microelectronics FingerTip device provides a basic touchscreen
+  functionality. Along with it the user can enable the touchkey which can work
+  as a basic HOME and BACK key for phones.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: st,stmfts
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogic power supply
+
+  interrupts:
+    maxItems: 1
+
+  ledvdd-supply:
+    description: Power supply to the touch key leds
+
+  touch-key-connected:
+    type: boolean
+    description: The touchkey feature is connected
+
+  vdd-supply:
+    description: Power supply
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@49 {
+            compatible = "st,stmfts";
+            reg = <0x49>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+            touchscreen-size-x = <1599>;
+            touchscreen-size-y = <2559>;
+            touch-key-connected;
+            avdd-supply = <&ldo30_reg>;
+            vdd-supply = <&ldo31_reg>;
+            ledvdd-supply = <&ldo33_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
new file mode 100644
index 0000000000..0ebe6dd043
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -0,0 +1,23 @@
+* Semtech SX8654 I2C Touchscreen Controller
+
+Required properties:
+- compatible: must be one of the following, depending on the model:
+	"semtech,sx8650"
+	"semtech,sx8654"
+	"semtech,sx8655"
+	"semtech,sx8656"
+- reg: i2c slave address
+- interrupts: touch controller interrupt
+
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
+Example:
+
+	sx8654@48 {
+		compatible = "semtech,sx8654";
+		reg = <0x48>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
new file mode 100644
index 0000000000..e44cc65abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-tsc
+
+  ti,wires:
+    description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+      support on the platform.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [4, 5, 8]
+
+  ti,x-plate-resistance:
+    description: X plate resistance
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,coordinate-readouts:
+    description: The sequencer supports a total of 16 programmable steps. Each
+      step is used to read a single coordinate. A single readout is enough but
+      multiple reads can increase the quality. A value of 5 means, 5 reads for
+      X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+      available. The remaining 4 can be used by the ADC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  ti,wire-config:
+    description: Different boards could have a different order for connecting
+      wires on touchscreen. We need to provide an 8-bit number where the
+      first four bits represent the analog lines and the next 4 bits represent
+      positive/negative terminal on that input line. Notations to represent the
+      input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+      and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 8
+
+  ti,charge-delay:
+    description: Length of touch screen charge delay step in terms of ADC clock
+      cycles. Charge delay value should be large in order to avoid false pen-up
+      events. This value effects the overall sampling speed, hence need to be
+      kept as low as possible, while avoiding false pen-up event. Start from a
+      lower value, say 0x400, and increase value until false pen-up events are
+      avoided. The pen-up detection happens immediately after the charge step,
+      so this does in fact function as a hardware knob for adjusting the amount
+      of "settling time".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - ti,wires
+  - ti,x-plate-resistance
+  - ti,coordinate-readouts
+  - ti,wire-config
+
+additionalProperties: false
+
+examples:
+  - |
+    tsc {
+        compatible = "ti,am3359-tsc";
+        ti,wires = <4>;
+        ti,x-plate-resistance = <200>;
+        ti,coordinate-readouts = <5>;
+        ti,wire-config = <0x00 0x11 0x22 0x33>;
+        ti,charge-delay = <0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
new file mode 100644
index 0000000000..7187c390b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Michael Welling <mwelling@ieee.org>
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - ti,tsc2004
+      - ti,tsc2005
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address when used on the I2C bus, or the SPI chip select index
+      when used on the SPI bus
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO specifier for the controller reset line
+
+  spi-max-frequency:
+    description: TSC2005 SPI bus clock frequency.
+    maximum: 25000000
+
+  ti,x-plate-ohms:
+    description: resistance of the touchscreen's X plates in ohm (defaults to 280)
+
+  ti,esd-recovery-timeout-ms:
+    description: |
+        if the touchscreen does not respond after the configured time
+        (in milli seconds), the driver will reset it. This is disabled
+        by default.
+
+  vio-supply:
+    description: Regulator specifier
+
+  touchscreen-fuzz-pressure: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-max-pressure: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,tsc2004
+    then:
+      properties:
+        spi-max-frequency: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@48 {
+            compatible = "ti,tsc2004";
+            reg = <0x48>;
+            vio-supply = <&vio>;
+
+            reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+            interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
+
+            touchscreen-fuzz-x = <4>;
+            touchscreen-fuzz-y = <7>;
+            touchscreen-fuzz-pressure = <2>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+            touchscreen-max-pressure = <2048>;
+
+            ti,x-plate-ohms = <280>;
+            ti,esd-recovery-timeout-ms = <8000>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@0 {
+            compatible = "ti,tsc2005";
+            spi-max-frequency = <6000000>;
+            reg = <0>;
+
+            vio-supply = <&vio>;
+
+            reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+            interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+            touchscreen-fuzz-x = <4>;
+            touchscreen-fuzz-y = <7>;
+            touchscreen-fuzz-pressure = <2>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+            touchscreen-max-pressure = <2048>;
+
+            ti,x-plate-ohms = <280>;
+            ti,esd-recovery-timeout-ms = <8000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
new file mode 100644
index 0000000000..e1adb902d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -0,0 +1 @@
+See touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
new file mode 100644
index 0000000000..431c13335c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common touchscreen
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+  panel:
+    description: If this touchscreen is integrally connected to a panel, this
+      is a reference to that panel. The presence of this reference indicates
+      that the touchscreen should be power sequenced together with the panel
+      and that they may share power and/or reset signals.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  touchscreen-min-x:
+    description: minimum x coordinate reported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  touchscreen-min-y:
+    description: minimum y coordinate reported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  touchscreen-size-x:
+    description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-size-y:
+    description: vertical resolution of touchscreen (maximum y coordinate reported + 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-max-pressure:
+    description: maximum reported pressure (arbitrary range dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-min-pressure:
+    description: minimum pressure on the touchscreen to be achieved in order
+      for the touchscreen driver to report a touch event.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-x:
+    description: horizontal noise value of the absolute input device (in pixels)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-y:
+    description: vertical noise value of the absolute input device (in pixels)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-pressure:
+    description: pressure noise value of the absolute input device (arbitrary
+      range dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-average-samples:
+    description: Number of data samples which are averaged for each read (valid
+      values dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-inverted-x:
+    description: X axis is inverted
+    type: boolean
+
+  touchscreen-inverted-y:
+    description: Y axis is inverted
+    type: boolean
+
+  touchscreen-swapped-x-y:
+    description: X and Y axis are swapped
+                 Swapping is done after inverting the axis
+    type: boolean
+
+  touchscreen-x-mm:
+    description: horizontal length in mm of the touchscreen
+
+  touchscreen-y-mm:
+    description: vertical length in mm of the touchscreen
+
+  touchscreen-x-plate-ohms:
+    description: Resistance of the X-plate in Ohms
+
+  touchscreen-y-plate-ohms:
+    description: Resistance of the Y-plate in Ohms
+
+dependencies:
+  touchscreen-size-x: [ touchscreen-size-y ]
+  touchscreen-size-y: [ touchscreen-size-x ]
+  touchscreen-x-mm: [ touchscreen-y-mm ]
+  touchscreen-y-mm: [ touchscreen-x-mm ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt
new file mode 100644
index 0000000000..4c1c092c27
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ts4800-ts.txt
@@ -0,0 +1,11 @@
+* TS-4800 Touchscreen bindings
+
+Required properties:
+- compatible: must be "technologic,ts4800-ts"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- syscon: phandle / integers array that points to the syscon node which
+          describes the FPGA's syscon registers.
+          - phandle to FPGA's syscon
+          - offset to the touchscreen register
+          - offset to the touchscreen enable bit
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
new file mode 100644
index 0000000000..210486a3fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
@@ -0,0 +1,39 @@
+* Texas Instruments tsc2007 touchscreen controller
+
+Required properties:
+- compatible: must be "ti,tsc2007".
+- reg: I2C address of the chip.
+- ti,x-plate-ohms: X-plate resistance in ohms.
+
+Optional properties:
+- gpios: the interrupt gpio the chip is connected to (through the penirq pin).
+  The penirq pin goes to low when the panel is touched.
+  (see GPIO binding[1] for more details).
+- interrupts: (gpio) interrupt to which the chip is connected
+  (see interrupt binding[0]).
+- ti,max-rt: maximum pressure.
+- ti,fuzzx: specifies the absolute input fuzz x value.
+  If set, it will permit noise in the data up to +- the value given to the fuzz
+  parameter, that is used to filter noise from the event stream.
+- ti,fuzzy: specifies the absolute input fuzz y value.
+- ti,fuzzz: specifies the absolute input fuzz z value.
+- ti,poll-period: how much time to wait (in milliseconds) before reading again the
+  values from the tsc2007.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+		tsc2007@49 {
+			compatible = "ti,tsc2007";
+			reg = <0x49>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 0x8>;
+			gpios = <&gpio4 0 0>;
+			ti,x-plate-ohms = <180>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
new file mode 100644
index 0000000000..27d55a506f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
@@ -0,0 +1,30 @@
+Zeitec ZET6223 I2C touchscreen controller
+
+Required properties:
+- compatible		  : "zeitec,zet6223"
+- reg			  : I2C slave address of the chip (0x76)
+- interrupts		  : interrupt specification for the zet6223 interrupt
+
+Optional properties:
+
+- vio-supply		  : Specification for VIO supply (1.8V or 3.3V,
+			    depending on system interface needs).
+- vcc-supply		  : Specification for 3.3V VCC supply.
+- touchscreen-size-x	  : See touchscreen.txt
+- touchscreen-size-y	  : See touchscreen.txt
+- touchscreen-inverted-x  : See touchscreen.txt
+- touchscreen-inverted-y  : See touchscreen.txt
+- touchscreen-swapped-x-y : See touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+
+	zet6223: touchscreen@76 {
+		compatible = "zeitec,zet6223";
+		reg = <0x76>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
new file mode 100644
index 0000000000..e3c27c4fd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -0,0 +1,34 @@
+* Neonode infrared touchscreen controller
+
+Required properties:
+- compatible: must be "neonode,zforce"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- reset-gpios: reset gpio the chip is connected to
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- irq-gpios : interrupt gpio the chip is connected to
+- vdd-supply: Regulator controlling the controller supply
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		zforce_ts@50 {
+			compatible = "neonode,zforce";
+			reg = <0x50>;
+			interrupts = <2 0>;
+			vdd-supply = <&reg_zforce_vdd>;
+
+			reset-gpios = <&gpio5 9 0>; /* RST */
+			irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 0000000000..b1507463a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
new file mode 100644
index 0000000000..8682ab6d4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt
@@ -0,0 +1,30 @@
+Texas Instruments TPS65217 and TPS65218 power button
+
+This module is part of the TPS65217/TPS65218. For more details about the whole
+TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt.
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
+
+Required properties:
+- interrupts: should be one of the following
+   - <2>: For controllers compatible with tps65217
+   - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Examples:
+
+&tps {
+	tps65217-pwrbutton {
+		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
+	};
+};
+
+&tps {
+	power-button {
+		compatible = "ti,tps65218-pwrbutton";
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/twl4030-keypad.txt b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
new file mode 100644
index 0000000000..e4be2f76a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-keypad.txt
@@ -0,0 +1,27 @@
+* TWL4030's Keypad Controller device tree bindings
+
+TWL4030's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+ * keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad
+      controller.
+- interrupt: should be one of the following
+   - <1>: For controllers compatible with twl4030 keypad controller.
+
+Example:
+	twl_keypad: keypad {
+		compatible = "ti,twl4030-keypad";
+		interrupts = <1>;
+		keypad,num-rows = <8>;
+		keypad,num-columns = <8>;
+	};
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
new file mode 100644
index 0000000000..f5021214ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
@@ -0,0 +1,21 @@
+Texas Instruments TWL family (twl4030) pwrbutton module
+
+This module is part of the TWL4030. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+- interrupts: should be one of the following
+   - <8>: For controllers compatible with twl4030
+
+Example:
+
+&twl {
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
new file mode 100644
index 0000000000..43ef770dfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
@@ -0,0 +1,22 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
+
+RAVE SP input device is a "MFD cell" device corresponding to power
+button functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Should be "zii,rave-sp-pwrbutton"
+
+Example:
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+	}
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
new file mode 100644
index 0000000000..fc21fe3e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/fsl,imx8m-noc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic i.MX bus frequency device
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The i.MX SoC family has multiple buses for which clock frequency (and
+  sometimes voltage) can be adjusted.
+
+  Some of those buses expose register areas mentioned in the memory maps as GPV
+  ("Global Programmers View") but not all. Access to this area might be denied
+  for normal (non-secure) world.
+
+  The buses are based on externally licensed IPs such as ARM NIC-301 and
+  Arteris FlexNOC but DT bindings are specific to the integration of these bus
+  interconnect IPs into imx SOCs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx8mm-nic
+              - fsl,imx8mn-nic
+              - fsl,imx8mp-nic
+              - fsl,imx8mq-nic
+          - const: fsl,imx8m-nic
+      - items:
+          - enum:
+              - fsl,imx8mm-noc
+              - fsl,imx8mn-noc
+              - fsl,imx8mp-noc
+              - fsl,imx8mq-noc
+          - const: fsl,imx8m-noc
+      - const: fsl,imx8m-nic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  fsl,ddrc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DDR Controller.
+
+  '#interconnect-cells':
+    description:
+      If specified then also act as an interconnect provider. Should only be
+      set once per soc on the main noc.
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/interconnect/imx8mm.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    noc: interconnect@32700000 {
+        compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
+        reg = <0x32700000 0x100000>;
+        clocks = <&clk IMX8MM_CLK_NOC>;
+        #interconnect-cells = <1>;
+        fsl,ddrc = <&ddrc>;
+
+        operating-points-v2 = <&noc_opp_table>;
+        noc_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-133333333 {
+                opp-hz = /bits/ 64 <133333333>;
+            };
+            opp-800000000 {
+                opp-hz = /bits/ 64 <800000000>;
+            };
+        };
+    };
+
+    ddrc: memory-controller@3d400000 {
+        compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+        reg = <0x3d400000 0x400000>;
+        clock-names = "core", "pll", "alt", "apb";
+        clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+                 <&clk IMX8MM_DRAM_PLL>,
+                 <&clk IMX8MM_CLK_DRAM_ALT>,
+                 <&clk IMX8MM_CLK_DRAM_APB>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
new file mode 100644
index 0000000000..138c544c8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -0,0 +1,86 @@
+Interconnect Provider Device Tree Bindings
+=========================================
+
+The purpose of this document is to define a common set of generic interconnect
+providers/consumers properties.
+
+
+= interconnect providers =
+
+The interconnect provider binding is intended to represent the interconnect
+controllers in the system. Each provider registers a set of interconnect
+nodes, which expose the interconnect related capabilities of the interconnect
+to consumer drivers. These capabilities can be throughput, latency, priority
+etc. The consumer drivers set constraints on interconnect path (or endpoints)
+depending on the use case. Interconnect providers can also be interconnect
+consumers, such as in the case where two network-on-chip fabrics interface
+directly.
+
+Required properties:
+- compatible : contains the interconnect provider compatible string
+- #interconnect-cells : number of cells in a interconnect specifier needed to
+			encode the interconnect node id and optionally add a
+			path tag
+
+Example:
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			#interconnect-cells = <1>;
+			reg = <0x580000 0x14000>;
+			clock-names = "bus_clk", "bus_a_clk";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+
+= interconnect consumers =
+
+The interconnect consumers are device nodes which dynamically express their
+bandwidth requirements along interconnect paths they are connected to. There
+can be multiple interconnect providers on a SoC and the consumer may consume
+multiple paths from different providers depending on use case and the
+components it has to interact with.
+
+Required properties:
+interconnects : Pairs of phandles and interconnect provider specifier to denote
+	        the edge source and destination ports of the interconnect path.
+		An optional path tag value could specified as additional argument
+		to both endpoints and in such cases, this information will be passed
+		to the interconnect framework to do aggregation based on the attached
+		tag.
+
+Optional properties:
+interconnect-names : List of interconnect path name strings sorted in the same
+		     order as the interconnects property. Consumers drivers will use
+		     interconnect-names to match interconnect paths with interconnect
+		     specifier pairs.
+
+                     Reserved interconnect names:
+			 * dma-mem: Path from the device to the main memory of
+			            the system
+
+Example:
+
+	sdhci@7864000 {
+		...
+		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
+		interconnect-names = "sdhc-mem";
+	};
+
+Example with path tags:
+
+	gnoc: interconnect@17900000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	mnoc: interconnect@1380000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	cpu@0 {
+		...
+		interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>;
+	}
diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
new file mode 100644
index 0000000000..58611ba2a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
+
+maintainers:
+  - Jia-Wei Chang <jia-wei.chang@mediatek.com>
+  - Johnson Wang <johnson.wang@mediatek.com>
+
+description: |
+  MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
+  MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
+  hardware. It can also optimize the voltage to reduce the power consumption.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-cci
+      - mediatek,mt8186-cci
+
+  clocks:
+    items:
+      - description:
+          The multiplexer for clock input of the bus.
+      - description:
+          A parent of "bus" clock which is used as an intermediate clock source
+          when the original clock source (PLL) is under transition and not
+          stable yet.
+
+  clock-names:
+    items:
+      - const: cci
+      - const: intermediate
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  proc-supply:
+    description:
+      Phandle of the regulator for CCI that provides the supply voltage.
+
+  sram-supply:
+    description:
+      Phandle of the regulator for sram of CCI that provides the supply
+      voltage. When it is present, the implementation needs to do
+      "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
+      SoC specific needs. When absent, the voltage scaling flow is handled by
+      hardware, hence no software "voltage tracking" is needed.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - proc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    cci: cci {
+        compatible = "mediatek,mt8183-cci";
+        clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+                 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+        clock-names = "cci", "intermediate";
+        operating-points-v2 = <&cci_opp>;
+        proc-supply = <&mt6358_vproc12_reg>;
+    };
+
+    cci_opp: opp-table-cci {
+        compatible = "operating-points-v2";
+        opp-shared;
+        opp2_00: opp-273000000 {
+            opp-hz = /bits/ 64 <273000000>;
+            opp-microvolt = <650000>;
+        };
+        opp2_01: opp-338000000 {
+            opp-hz = /bits/ 64 <338000000>;
+            opp-microvolt = <687500>;
+        };
+        opp2_02: opp-403000000 {
+            opp-hz = /bits/ 64 <403000000>;
+            opp-microvolt = <718750>;
+        };
+        opp2_03: opp-463000000 {
+            opp-hz = /bits/ 64 <463000000>;
+            opp-microvolt = <756250>;
+        };
+        opp2_04: opp-546000000 {
+            opp-hz = /bits/ 64 <546000000>;
+            opp-microvolt = <800000>;
+        };
+        opp2_05: opp-624000000 {
+            opp-hz = /bits/ 64 <624000000>;
+            opp-microvolt = <818750>;
+        };
+        opp2_06: opp-689000000 {
+            opp-hz = /bits/ 64 <689000000>;
+            opp-microvolt = <850000>;
+        };
+        opp2_07: opp-767000000 {
+            opp-hz = /bits/ 64 <767000000>;
+            opp-microvolt = <868750>;
+        };
+        opp2_08: opp-845000000 {
+            opp-hz = /bits/ 64 <845000000>;
+            opp-microvolt = <893750>;
+        };
+        opp2_09: opp-871000000 {
+            opp-hz = /bits/ 64 <871000000>;
+            opp-microvolt = <906250>;
+        };
+        opp2_10: opp-923000000 {
+            opp-hz = /bits/ 64 <923000000>;
+            opp-microvolt = <931250>;
+        };
+        opp2_11: opp-962000000 {
+            opp-hz = /bits/ 64 <962000000>;
+            opp-microvolt = <943750>;
+        };
+        opp2_12: opp-1027000000 {
+            opp-hz = /bits/ 64 <1027000000>;
+            opp-microvolt = <975000>;
+        };
+        opp2_13: opp-1092000000 {
+            opp-hz = /bits/ 64 <1092000000>;
+            opp-microvolt = <1000000>;
+        };
+        opp2_14: opp-1144000000 {
+            opp-hz = /bits/ 64 <1144000000>;
+            opp-microvolt = <1025000>;
+        };
+        opp2_15: opp-1196000000 {
+            opp-hz = /bits/ 64 <1196000000>;
+            opp-microvolt = <1050000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
new file mode 100644
index 0000000000..eec987640b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,bcm-voter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BCM-Voter Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+  The Bus Clock Manager (BCM) is a dedicated hardware accelerator that manages
+  shared system resources by aggregating requests from multiple Resource State
+  Coordinators (RSC). Interconnect providers are able to vote for aggregated
+  thresholds values from consumers by communicating through their respective
+  RSCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,bcm-voter
+
+  qcom,tcs-wait:
+    description: |
+      Optional mask of which TCSs (Triggered Command Sets) wait for completion
+      upon triggering. If not specified, then the AMC and WAKE sets wait for
+      completion. The mask bits are available in the QCOM_ICC_TAG_* defines.
+
+      The AMC TCS is triggered immediately when icc_set_bw() is called. The
+      WAKE/SLEEP TCSs are triggered when the RSC transitions between active and
+      sleep modes.
+
+      In most cases, it's necessary to wait in both the AMC and WAKE sets to
+      ensure resources are available before use. If a specific RSC and its use
+      cases can ensure sufficient delay by other means, then this can be
+      overridden to reduce latencies.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+  - |
+
+    apps_bcm_voter: bcm-voter {
+        compatible = "qcom,bcm-voter";
+    };
+
+  # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
+  - |
+
+    #include <dt-bindings/interconnect/qcom,icc.h>
+
+    disp_bcm_voter: bcm-voter {
+        compatible = "qcom,bcm-voter";
+        qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
new file mode 100644
index 0000000000..8004c4baf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8974 Network-On-Chip Interconnect
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  The Qualcomm MSM8974 interconnect providers support setting system
+  bandwidth requirements between various network-on-chip fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,msm8974-bimc
+      - qcom,msm8974-cnoc
+      - qcom,msm8974-mmssnoc
+      - qcom,msm8974-ocmemnoc
+      - qcom,msm8974-pnoc
+      - qcom,msm8974-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/qcom,rpmcc.h>
+
+      bimc: interconnect@fc380000 {
+              reg = <0xfc380000 0x6a000>;
+              compatible = "qcom,msm8974-bimc";
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
+      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
new file mode 100644
index 0000000000..73f809cdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Interconnect Bandwidth Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Bandwidth Monitor measures current throughput on buses between various NoC
+  fabrics and provides information when it crosses configured thresholds.
+
+  Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845::
+   - Measuring the bandwidth between CPUs and Last Level Cache Controller -
+     called just BWMON,
+   - Measuring the bandwidth between Last Level Cache Controller and memory
+     (DDR) - called LLCC BWMON.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,msm8998-bwmon       # BWMON v4
+      - items:
+          - enum:
+              - qcom,sc7180-cpu-bwmon
+              - qcom,sc7280-cpu-bwmon
+              - qcom,sc8280xp-cpu-bwmon
+              - qcom,sdm845-cpu-bwmon
+              - qcom,sm6350-llcc-bwmon
+              - qcom,sm8250-cpu-bwmon
+              - qcom,sm8550-cpu-bwmon
+          - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
+      - items:
+          - enum:
+              - qcom,sc7180-llcc-bwmon
+              - qcom,sc8280xp-llcc-bwmon
+              - qcom,sm6350-cpu-bwmon
+              - qcom,sm8250-llcc-bwmon
+              - qcom,sm8550-llcc-bwmon
+          - const: qcom,sc7280-llcc-bwmon
+      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
+      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  reg:
+    # BWMON v5 uses one register address space, v1-v4 use one or two.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - interconnects
+  - interrupts
+  - operating-points-v2
+  - opp-table
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8998-bwmon
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+        reg-names:
+          items:
+            - const: monitor
+            - const: global
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+        reg-names:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu@1436400 {
+        compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
+        reg = <0x01436400 0x600>;
+        interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+        interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+        operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+        cpu_bwmon_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-0 {
+                opp-peak-kBps = <4800000>;
+            };
+            opp-1 {
+                opp-peak-kBps = <9216000>;
+            };
+            opp-2 {
+                opp-peak-kBps = <15052800>;
+            };
+            opp-3 {
+                opp-peak-kBps = <20889600>;
+            };
+            opp-4 {
+                opp-peak-kBps = <25497600>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
new file mode 100644
index 0000000000..21dae0b928
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,osm-l3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
+  The OSM L3 interconnect provider aggregates the L3 bandwidth requests
+  from CPU/GPU and relays it to the OSM.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-osm-l3
+              - qcom,sc8180x-osm-l3
+              - qcom,sdm670-osm-l3
+              - qcom,sdm845-osm-l3
+              - qcom,sm6350-osm-l3
+              - qcom,sm8150-osm-l3
+          - const: qcom,osm-l3
+      - items:
+          - enum:
+              - qcom,sc7280-epss-l3
+              - qcom,sc8280xp-epss-l3
+              - qcom,sm6375-cpucp-l3
+              - qcom,sm8250-epss-l3
+              - qcom,sm8350-epss-l3
+          - const: qcom,epss-l3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: xo clock
+      - description: alternate clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #define GPLL0               165
+    #define RPMH_CXO_CLK        0
+
+    osm_l3: interconnect@17d41000 {
+      compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
+      reg = <0x17d41000 0x1400>;
+
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+      clock-names = "xo", "alternate";
+
+      #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
new file mode 100644
index 0000000000..f65a2fe846
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Network-On-Chip interconnect
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Qualcomm QCM2290 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcm2290-bimc
+      - qcom,qcm2290-cnoc
+      - qcom,qcm2290-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,qcm2290-qup-virt
+          - qcom,qcm2290-mmrt-virt
+          - qcom,qcm2290-mmnrt-virt
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,qcm2290-snoc";
+        reg = <0x01880000 0x60200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+
+        qup_virt: interconnect-qup {
+            compatible = "qcom,qcm2290-qup-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_QUP_CLK>,
+                     <&rpmcc RPM_SMD_QUP_A_CLK>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,qcm2290-mmnrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
+                     <&rpmcc RPM_SMD_MMNRT_A_CLK>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,qcm2290-mmrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
+                     <&rpmcc RPM_SMD_MMRT_A_CLK>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,qcm2290-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+                 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+    };
+
+    bimc: interconnect@4480000 {
+        compatible = "qcom,qcm2290-bimc";
+        reg = <0x04480000 0x80000>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
new file mode 100644
index 0000000000..0070b0396e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qdu1000-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QDU1000
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-clk-virt
+      - qcom,qdu1000-gem-noc
+      - qcom,qdu1000-mc-virt
+      - qcom,qdu1000-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-clk-virt
+              - qcom,qdu1000-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+
+    system_noc: interconnect@1640000 {
+        compatible = "qcom,qdu1000-system-noc";
+        reg = <0x1640000 0x45080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qdu1000-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
new file mode 100644
index 0000000000..4f95d51201
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+  RPM interconnect providers support system bandwidth requirements through
+  RPM processor. The provider is able to communicate with the RPM through
+  the RPM shared memory device.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,msm8916-bimc
+      - qcom,msm8916-pcnoc
+      - qcom,msm8916-snoc
+      - qcom,msm8939-bimc
+      - qcom,msm8939-pcnoc
+      - qcom,msm8939-snoc
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
+      - qcom,qcs404-bimc
+      - qcom,qcs404-pcnoc
+      - qcom,qcs404-snoc
+      - qcom,sdm660-a2noc
+      - qcom,sdm660-bimc
+      - qcom,sdm660-cnoc
+      - qcom,sdm660-gnoc
+      - qcom,sdm660-mnoc
+      - qcom,sdm660-snoc
+
+  '#interconnect-cells':
+    description: |
+      Value: <1> is one cell in an interconnect specifier for the
+      interconnect node id, <2> requires the interconnect node id and an
+      extra path tag.
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 2
+    maxItems: 7
+
+  clock-names:
+    minItems: 2
+    maxItems: 7
+
+  power-domains:
+    maxItems: 1
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    additionalProperties: false
+    description:
+      snoc-mm is a child of snoc, sharing snoc's register address space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,msm8939-snoc-mm
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-bimc
+              - qcom,msm8916-pcnoc
+              - qcom,msm8916-snoc
+              - qcom,msm8939-bimc
+              - qcom,msm8939-pcnoc
+              - qcom,msm8939-snoc
+              - qcom,msm8996-a1noc
+              - qcom,msm8996-bimc
+              - qcom,msm8996-cnoc
+              - qcom,msm8996-pnoc
+              - qcom,msm8996-snoc
+              - qcom,qcs404-bimc
+              - qcom,qcs404-pcnoc
+              - qcom,qcs404-snoc
+              - qcom,sdm660-bimc
+              - qcom,sdm660-cnoc
+              - qcom,sdm660-gnoc
+              - qcom,sdm660-snoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+
+        clocks:
+          items:
+            - description: Bus Clock
+            - description: Bus A Clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-mnoc
+              - qcom,sdm660-mnoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: iface
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: CPU-NoC High-performance Bus Clock.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: aggre2_ufs_axi
+            - const: ufs_axi
+
+        clocks:
+          items:
+            - description: Bus Clock
+            - description: Bus A Clock
+            - description: Aggregate2 NoC UFS AXI Clock
+            - description: UFS AXI Clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,msm8939-snoc
+    then:
+      patternProperties:
+        '^interconnect-[a-z0-9]+$': false
+
+examples:
+  - |
+      #include <dt-bindings/clock/qcom,rpmcc.h>
+
+      bimc: interconnect@400000 {
+              compatible = "qcom,msm8916-bimc";
+              reg = <0x00400000 0x62000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
+      };
+
+      pcnoc: interconnect@500000 {
+              compatible = "qcom,msm8916-pcnoc";
+              reg = <0x00500000 0x11000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+                       <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+      };
+
+      snoc: interconnect@580000 {
+              compatible = "qcom,msm8916-snoc";
+              reg = <0x00580000 0x14000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
+      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
new file mode 100644
index 0000000000..bbeb054153
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  '#interconnect-cells':
+    enum: [ 1, 2 ]
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    maxItems: 2
+    description:
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    maxItems: 2
+    description:
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
new file mode 100644
index 0000000000..a46497af1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+  - Odelu Kukatla <okukatla@codeaurora.org>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,sc7180-aggre1-noc
+      - qcom,sc7180-aggre2-noc
+      - qcom,sc7180-camnoc-virt
+      - qcom,sc7180-compute-noc
+      - qcom,sc7180-config-noc
+      - qcom,sc7180-dc-noc
+      - qcom,sc7180-gem-noc
+      - qcom,sc7180-mc-virt
+      - qcom,sc7180-mmss-noc
+      - qcom,sc7180-npu-noc
+      - qcom,sc7180-qup-virt
+      - qcom,sc7180-system-noc
+      - qcom,sc8180x-aggre1-noc
+      - qcom,sc8180x-aggre2-noc
+      - qcom,sc8180x-camnoc-virt
+      - qcom,sc8180x-compute-noc
+      - qcom,sc8180x-config-noc
+      - qcom,sc8180x-dc-noc
+      - qcom,sc8180x-gem-noc
+      - qcom,sc8180x-mc-virt
+      - qcom,sc8180x-mmss-noc
+      - qcom,sc8180x-qup-virt
+      - qcom,sc8180x-system-noc
+      - qcom,sdm670-aggre1-noc
+      - qcom,sdm670-aggre2-noc
+      - qcom,sdm670-config-noc
+      - qcom,sdm670-dc-noc
+      - qcom,sdm670-gladiator-noc
+      - qcom,sdm670-mem-noc
+      - qcom,sdm670-mmss-noc
+      - qcom,sdm670-system-noc
+      - qcom,sdm845-aggre1-noc
+      - qcom,sdm845-aggre2-noc
+      - qcom,sdm845-config-noc
+      - qcom,sdm845-dc-noc
+      - qcom,sdm845-gladiator-noc
+      - qcom,sdm845-mem-noc
+      - qcom,sdm845-mmss-noc
+      - qcom,sdm845-system-noc
+      - qcom,sdx55-mc-virt
+      - qcom,sdx55-mem-noc
+      - qcom,sdx55-system-noc
+      - qcom,sdx65-mc-virt
+      - qcom,sdx65-mem-noc
+      - qcom,sdx65-system-noc
+      - qcom,sm8150-aggre1-noc
+      - qcom,sm8150-aggre2-noc
+      - qcom,sm8150-camnoc-noc
+      - qcom,sm8150-compute-noc
+      - qcom,sm8150-config-noc
+      - qcom,sm8150-dc-noc
+      - qcom,sm8150-gem-noc
+      - qcom,sm8150-mc-virt
+      - qcom,sm8150-mmss-noc
+      - qcom,sm8150-system-noc
+      - qcom,sm8250-aggre1-noc
+      - qcom,sm8250-aggre2-noc
+      - qcom,sm8250-compute-noc
+      - qcom,sm8250-config-noc
+      - qcom,sm8250-dc-noc
+      - qcom,sm8250-gem-noc
+      - qcom,sm8250-mc-virt
+      - qcom,sm8250-mmss-noc
+      - qcom,sm8250-npu-noc
+      - qcom,sm8250-qup-virt
+      - qcom,sm8250-system-noc
+      - qcom,sm8350-aggre1-noc
+      - qcom,sm8350-aggre2-noc
+      - qcom,sm8350-config-noc
+      - qcom,sm8350-dc-noc
+      - qcom,sm8350-gem-noc
+      - qcom,sm8350-lpass-ag-noc
+      - qcom,sm8350-mc-virt
+      - qcom,sm8350-mmss-noc
+      - qcom,sm8350-compute-noc
+      - qcom,sm8350-system-noc
+
+  '#interconnect-cells': true
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - qcom,sm8250-qup-virt
+    then:
+      required:
+        - reg
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+      mem_noc: interconnect@1380000 {
+             compatible = "qcom,sdm845-mem-noc";
+             reg = <0x01380000 0x27200>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voters = <&apps_bcm_voter>;
+      };
+
+      mmss_noc: interconnect@1740000 {
+             compatible = "qcom,sdm845-mmss-noc";
+             reg = <0x01740000 0x1c1000>;
+             #interconnect-cells = <1>;
+             qcom,bcm-voter-names = "apps", "disp";
+             qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
+      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
new file mode 100644
index 0000000000..2e0c0bc7a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sa8775p-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SA8775P
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sa8775p.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-aggre1-noc
+      - qcom,sa8775p-aggre2-noc
+      - qcom,sa8775p-clk-virt
+      - qcom,sa8775p-config-noc
+      - qcom,sa8775p-dc-noc
+      - qcom,sa8775p-gem-noc
+      - qcom,sa8775p-gpdsp-anoc
+      - qcom,sa8775p-lpass-ag-noc
+      - qcom,sa8775p-mc-virt
+      - qcom,sa8775p-mmss-noc
+      - qcom,sa8775p-nspa-noc
+      - qcom,sa8775p-nspb-noc
+      - qcom,sa8775p-pcie-anoc
+      - qcom,sa8775p-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aggre1_noc: interconnect-aggre1-noc {
+        compatible = "qcom,sa8775p-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
new file mode 100644
index 0000000000..b135597d94
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7280-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC7280
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-aggre1-noc
+      - qcom,sc7280-aggre2-noc
+      - qcom,sc7280-clk-virt
+      - qcom,sc7280-cnoc2
+      - qcom,sc7280-cnoc3
+      - qcom,sc7280-dc-noc
+      - qcom,sc7280-gem-noc
+      - qcom,sc7280-lpass-ag-noc
+      - qcom,sc7280-mc-virt
+      - qcom,sc7280-mmss-noc
+      - qcom,sc7280-nsp-noc
+      - qcom,sc7280-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-clk-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect {
+        compatible = "qcom,sc7280-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@9100000 {
+        reg = <0x9100000 0xe2200>;
+        compatible = "qcom,sc7280-gem-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
new file mode 100644
index 0000000000..6c2da03f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc8280xp-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-aggre1-noc
+      - qcom,sc8280xp-aggre2-noc
+      - qcom,sc8280xp-clk-virt
+      - qcom,sc8280xp-config-noc
+      - qcom,sc8280xp-dc-noc
+      - qcom,sc8280xp-gem-noc
+      - qcom,sc8280xp-lpass-ag-noc
+      - qcom,sc8280xp-mc-virt
+      - qcom,sc8280xp-mmss-noc
+      - qcom,sc8280xp-nspa-noc
+      - qcom,sc8280xp-nspb-noc
+      - qcom,sc8280xp-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect-0 {
+        compatible = "qcom,sc8280xp-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
new file mode 100644
index 0000000000..49eb156b08
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  Qualcomm RPMh-based interconnect provider on SM6350.
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6350-aggre1-noc
+      - qcom,sm6350-aggre2-noc
+      - qcom,sm6350-config-noc
+      - qcom,sm6350-dc-noc
+      - qcom,sm6350-gem-noc
+      - qcom,sm6350-mmss-noc
+      - qcom,sm6350-npu-noc
+      - qcom,sm6350-system-noc
+
+  reg:
+    maxItems: 1
+
+  '#interconnect-cells': true
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+    $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6350-clk-virt
+          - qcom,sm6350-compute-noc
+
+      '#interconnect-cells': true
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    config_noc: interconnect@1500000 {
+        compatible = "qcom,sm6350-config-noc";
+        reg = <0x01500000 0x28000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm6350-system-noc";
+        reg = <0x01620000 0x17080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        clk_virt: interconnect-clk-virt {
+            compatible = "qcom,sm6350-clk-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
new file mode 100644
index 0000000000..3cff7e6622
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8450-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8450
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-clk-virt
+              - qcom,sm8450-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe 0 AXI clock
+            - description: aggre-NOC PCIe 1 AXI clock
+            - description: aggre UFS PHY AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+              - qcom,sm8450-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    interconnect-0 {
+        compatible = "qcom,sm8450-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@1700000 {
+        compatible = "qcom,sm8450-aggre2-noc";
+        reg = <0x01700000 0x31080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&rpmhcc RPMH_IPA_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
new file mode 100644
index 0000000000..716bd21f60
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8550-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8550
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-aggre1-noc
+      - qcom,sm8550-aggre2-noc
+      - qcom,sm8550-clk-virt
+      - qcom,sm8550-cnoc-main
+      - qcom,sm8550-config-noc
+      - qcom,sm8550-gem-noc
+      - qcom,sm8550-lpass-ag-noc
+      - qcom,sm8550-lpass-lpiaon-noc
+      - qcom,sm8550-lpass-lpicx-noc
+      - qcom,sm8550-mc-virt
+      - qcom,sm8550-mmss-noc
+      - qcom,sm8550-nsp-noc
+      - qcom,sm8550-pcie-anoc
+      - qcom,sm8550-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-clk-virt
+              - qcom,sm8550-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+              - qcom,sm8550-aggre2-noc
+              - qcom,sm8550-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8550-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8550-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
new file mode 100644
index 0000000000..5e26e48c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
@@ -0,0 +1,317 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Bus and Interconnect
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has many buses for data transfer between DRAM and
+  sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
+  Generally, each bus of Exynos SoC includes a source clock and a power line,
+  which are able to change the clock frequency of the bus in runtime. To
+  monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
+  Performance Monitoring Unit), which is able to measure the current load of
+  sub-blocks.
+
+  The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+  The each AXI bus has the owned source clock but, has not the only owned power
+  line. The power line might be shared among one more sub-blocks.  So, we can
+  divide into two type of device as the role of each sub-block.  There are two
+  type of bus devices as following::
+   - parent bus device
+   - passive bus device
+
+  Basically, parent and passive bus device share the same power line.  The
+  parent bus device can only change the voltage of shared power line and the
+  rest bus devices (passive bus device) depend on the decision of the parent
+  bus device. If there are three blocks which share the VDD_xxx power line,
+  Only one block should be parent device and then the rest blocks should depend
+  on the parent device as passive device.
+
+    VDD_xxx |--- A block (parent)
+      |--- B block (passive)
+      |--- C block (passive)
+
+  There are a little different composition among Exynos SoC because each Exynos
+  SoC has different sub-blocks. Therefore, such difference should be specified
+  in devicetree file instead of each device driver. In result, this driver is
+  able to support the bus frequency for all Exynos SoCs.
+
+  Detailed correlation between sub-blocks and power line according
+  to Exynos SoC::
+   - In case of Exynos3250, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC
+       |--- G3D
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- FSYS
+       |--- LCD0
+       |--- PERIR
+       |--- ISP
+       |--- CAM
+
+     - MIF bus's frequency/voltage table
+       -----------------------
+       |Lv| Freq   | Voltage |
+       -----------------------
+       |L1| 50000  |800000   |
+       |L2| 100000 |800000   |
+       |L3| 134000 |800000   |
+       |L4| 200000 |825000   |
+       |L5| 400000 |875000   |
+       -----------------------
+
+     - INT bus's frequency/voltage table
+       ----------------------------------------------------------
+       |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
+       | name|       |LCD0    |       |       |       ||        |
+       |     |       |FSYS    |       |       |       ||        |
+       |     |       |MFC     |       |       |       ||        |
+       ----------------------------------------------------------
+       |Mode |*parent|passive |passive|passive|passive||        |
+       ----------------------------------------------------------
+       |Lv   |Frequency                               ||Voltage |
+       ----------------------------------------------------------
+       |L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
+       |L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
+       |L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
+       |L4   |134000 |134000  |200000 |200000 |       ||1000000 |
+       |L5   |200000 |200000  |400000 |300000 |       ||1000000 |
+       ----------------------------------------------------------
+
+   - In case of Exynos4210, there is one power line as following::
+     VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
+       |--- LEFTBUS
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- LCD0
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- LCD1
+
+   - In case of Exynos4x12, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- IMAGE
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- ISP
+
+   - In case of Exynos5422, there are two power line as following::
+     VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+             |--- DREX 1
+
+     VDD_INT |--- NoC_Core (parent device)
+       |--- G2D
+       |--- G3D
+       |--- DISP1
+       |--- NoC_WCORE
+       |--- GSCL
+       |--- MSCL
+       |--- ISP
+       |--- MFC
+       |--- GEN
+       |--- PERIS
+       |--- PERIC
+       |--- FSYS
+       |--- FSYS2
+
+   - In case of Exynos5433, there is VDD_INT power line as following::
+     VDD_INT |--- G2D (parent device)
+       |--- MSCL
+       |--- GSCL
+       |--- JPEG
+       |--- MFC
+       |--- HEVC
+       |--- BUS0
+       |--- BUS1
+       |--- BUS2
+       |--- PERIS (Fixed clock rate)
+       |--- PERIC (Fixed clock rate)
+       |--- FSYS  (Fixed clock rate)
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-bus
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bus
+
+  devfreq:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Parent bus device. Valid and required only for the passive bus devices.
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description:
+      Devfreq-event device to monitor the current utilization of buses. Valid
+      and required only for the parent bus devices.
+
+  exynos,saturation-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Percentage value which is used to calibrate the performance count against
+      total cycle count.  Valid only for the parent bus devices.
+
+  '#interconnect-cells':
+    const: 0
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  samsung,data-clock-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Ratio of the data throughput in B/s to minimum data clock frequency in
+      Hz.
+
+  vdd-supply:
+    description:
+      Main bus power rail. Valid and required only for the parent bus devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu_dmc CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+
+        bus_dmc_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-50000000 {
+                opp-hz = /bits/ 64 <50000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-100000000 {
+                opp-hz = /bits/ 64 <100000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-134000000 {
+                opp-hz = /bits/ 64 <134000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                opp-microvolt = <825000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <875000>;
+            };
+        };
+    };
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+        };
+    };
+
+    bus_leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    bus-rightbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDR>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq = <&bus_leftbus>;
+    };
+
+  - |
+    dmc: bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        samsung,data-clock-ratio = <4>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        interconnects = <&dmc>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    display: bus-display {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_ACLK_266>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_display_opp_table>;
+        interconnects = <&leftbus &dmc>;
+        #interconnect-cells = <0>;
+        devfreq = <&leftbus>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
new file mode 100644
index 0000000000..5a4dd263fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
@@ -0,0 +1,37 @@
+TB10x Top Level Interrupt Controller
+====================================
+
+The Abilis TB10x SOC contains a custom interrupt controller. It performs
+one-to-one mapping of external interrupt sources to CPU interrupts and
+provides support for reconfigurable trigger modes.
+
+Required properties
+-------------------
+
+- compatible: Should be "abilis,tb10x-ictl"
+- reg: specifies physical base address and size of register range.
+- interrupt-congroller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+  source connected to this controller. The value shall be 2.
+- interrupts: Specifies the list of interrupt lines which are handled by
+  the interrupt controller in the parent controller's notation. Interrupts
+  are mapped one-to-one to parent interrupts.
+
+Example
+-------
+
+intc: interrupt-controller {	/* Parent interrupt controller */
+	interrupt-controller;
+	#interrupt-cells = <1>;	/* For example below */
+	/* ... */
+};
+
+tb10x_ictl: pic@2000 {		/* TB10x interrupt controller */
+	compatible = "abilis,tb10x-ictl";
+	reg = <0x2000 0x20>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	interrupt-parent = <&intc>;
+	interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29 30 31>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
new file mode 100644
index 0000000000..27756d0c54
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/actions,owl-sirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SIRQ interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  This interrupt controller is found in the Actions Semi Owl SoCs (S500, S700
+  and S900) and provides support for handling up to 3 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - actions,s500-sirq
+      - actions,s700-sirq
+      - actions,s900-sirq
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number, between 0 and 2, while the second
+      cell is the trigger type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines.
+      They shall be specified sequentially from output 0 to 2.
+    minItems: 3
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sirq: interrupt-controller@b01b0200 {
+      compatible = "actions,s500-sirq";
+      reg = <0xb01b0200 0x4>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
new file mode 100644
index 0000000000..5669764f9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
@@ -0,0 +1,25 @@
+Alpine MSIX controller
+
+See arm,gic-v3.txt for SPI and MSI definitions.
+
+Required properties:
+
+- compatible: should be "al,alpine-msix"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- msi-controller: identifies the node as an PCI Message Signaled Interrupt
+		  controller
+- al,msi-base-spi: SPI base of the MSI frame
+- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0
+
+Example:
+
+msix: msix {
+	compatible = "al,alpine-msix";
+	reg = <0x0 0xfbe00000 0x0 0x100000>;
+	interrupt-parent = <&gic>;
+	interrupt-controller;
+	msi-controller;
+	al,msi-base-spi = <160>;
+	al,msi-num-spis = <160>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
new file mode 100644
index 0000000000..a713633be7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Interrupt Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  "#interrupt-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ic
+      - allwinner,suniv-f1c100s-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@1c20400 {
+        compatible = "allwinner,sun4i-a10-ic";
+        reg = <0x01c20400 0x400>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
new file mode 100644
index 0000000000..4fa6fd400e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 NMI/Wakeup Interrupt Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  "#interrupt-cells":
+    const: 3
+    description:
+      The first cell is GIC_SPI (0), the second cell is the IRQ number, and
+      the third cell is the trigger type as defined in interrupt.txt in this
+      directory.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-r-intc
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-r-intc
+              - allwinner,sun8i-h3-r-intc
+              - allwinner,sun50i-a64-r-intc
+          - const: allwinner,sun6i-a31-r-intc
+      - const: allwinner,sun50i-h6-r-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The GIC interrupt labeled as "External NMI".
+
+  interrupt-controller: true
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    r_intc: interrupt-controller@1f00c00 {
+            compatible = "allwinner,sun50i-a64-r-intc",
+                         "allwinner,sun6i-a31-r-intc";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            reg = <0x01f00c00 0x400>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
new file mode 100644
index 0000000000..83603180d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 Non-Maskable Interrupt Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell the trigger
+      type as defined in interrupt.txt in this directory.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-sc-nmi
+        deprecated: true
+      - const: allwinner,sun7i-a20-sc-nmi
+      - items:
+          - const: allwinner,sun8i-v3s-nmi
+          - const: allwinner,sun9i-a80-nmi
+      - const: allwinner,sun9i-a80-nmi
+      - items:
+          - const: allwinner,sun50i-a100-nmi
+          - const: allwinner,sun9i-a80-nmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@1c00030 {
+        compatible = "allwinner,sun7i-a20-sc-nmi";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x01c00030 0x0c>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 0 4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
new file mode 100644
index 0000000000..c676b03c75
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
@@ -0,0 +1,27 @@
+Amazon's Annapurna Labs Fabric Interrupt Controller
+
+Required properties:
+
+- compatible: should be "amazon,al-fic"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells : must be 2. Specifies the number of cells needed to encode
+  an interrupt source. Supported trigger types are low-to-high edge
+  triggered and active high level-sensitive.
+- interrupts: describes which input line in the interrupt parent, this
+  fic's output is connected to. This field property depends on the parent's
+  binding
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+amazon_fic: interrupt-controller@fd8a8500 {
+	compatible = "amazon,al-fic";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x0 0xfd8a8500 0x0 0x1000>;
+	interrupt-parent = <&gic>;
+	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 0000000000..3d06db98e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+  Meson SoCs contains an interrupt controller which is able to watch the SoC
+  pads and generate an interrupt on edge or level. The controller is essentially
+  a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select
+  edge or level and polarity. It does not expose all 256 mux inputs because the
+  documentation shows that the upper part is not mapped to any pad. The actual
+  number of interrupts exposed depends on the SoC.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gpio-intc
+      - items:
+          - enum:
+              - amlogic,meson8-gpio-intc
+              - amlogic,meson8b-gpio-intc
+              - amlogic,meson-gxbb-gpio-intc
+              - amlogic,meson-gxl-gpio-intc
+              - amlogic,meson-axg-gpio-intc
+              - amlogic,meson-g12a-gpio-intc
+              - amlogic,meson-sm1-gpio-intc
+              - amlogic,meson-a1-gpio-intc
+              - amlogic,meson-s4-gpio-intc
+              - amlogic,c3-gpio-intc
+          - const: amlogic,meson-gpio-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  amlogic,channel-interrupts:
+    description: Array with the upstream hwirq numbers
+    minItems: 8
+    maxItems: 12
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - amlogic,channel-interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@9880 {
+      compatible = "amlogic,meson-gxbb-gpio-intc",
+                   "amlogic,meson-gpio-intc";
+      reg = <0x9880 0x10>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
new file mode 100644
index 0000000000..698588e9aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller is a simple interrupt controller present on
+  Apple ARM SoC platforms, including various iPhone and iPad devices and the
+  "Apple Silicon" Macs.
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Per-IRQ affinity setting
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable
+    if not symmetric)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Default "this CPU" register view and explicit per-CPU views
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: apple,t8103-aic
+      - const: apple,aic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+          - 4: 'efficient' CPU PMU
+          - 5: 'performance' CPU PMU
+
+      The 3rd cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    description: |
+      Specifies base physical address and size of the AIC registers.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@23b100000 {
+            compatible = "apple,t8103-aic", "apple,aic";
+            #interrupt-cells = <3>;
+            interrupt-controller;
+            reg = <0x2 0x3b100000 0x0 0x8000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
new file mode 100644
index 0000000000..2bde6cc6fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller 2
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller 2 is a simple interrupt controller present on
+  Apple ARM SoC platforms starting with t600x (M1 Pro and Max).
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Support for multiple dies
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller. It also handles
+  FIQ-based Fast IPIs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-aic
+          - apple,t6000-aic
+      - const: apple,aic2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    minimum: 3
+    maximum: 4
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the die ID (only present on apple,t6000-aic).
+
+      The next cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+
+      The last cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    items:
+      - description: Address and size of the main AIC2 registers.
+      - description: Address and size of the AIC2 Event register.
+
+  reg-names:
+    items:
+      - const: core
+      - const: event
+
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8112-aic
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 3
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 4
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@28e100000 {
+            compatible = "apple,t6000-aic", "apple,aic2";
+            #interrupt-cells = <4>;
+            interrupt-controller;
+            reg = <0x2 0x8e100000 0x0 0xc000>,
+                  <0x2 0x8e10c000 0x0 0x4>;
+            reg-names = "core", "event";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
new file mode 100644
index 0000000000..0f4a062c9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -0,0 +1,316 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 3
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  AArch64 SMP cores are often associated with a GICv3, providing Private
+  Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+  Software Generated Interrupts (SGI), and Locality-specific Peripheral
+  Interrupts (LPI).
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,msm8996-gic-v3
+          - const: arm,gic-v3
+      - const: arm,gic-v3
+
+  interrupt-controller: true
+
+  "#address-cells":
+    enum: [ 0, 1, 2 ]
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  "#interrupt-cells":
+    description: |
+      Specifies the number of cells needed to encode an interrupt source.
+      Must be a single cell with a value of at least 3.
+      If the system requires describing PPI affinity, then the value must
+      be at least 4.
+
+      The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+      interrupts, 2 for interrupts in the Extended SPI range, 3 for the
+      Extended PPI range. Other values are reserved for future use.
+
+      The 2nd cell contains the interrupt number for the interrupt type.
+      SPI interrupts are in the range [0-987]. PPI interrupts are in the
+      range [0-15]. Extended SPI interrupts are in the range [0-1023].
+      Extended PPI interrupts are in the range [0-127].
+
+      The 3rd cell is the flags, encoded as follows:
+      bits[3:0] trigger type and level flags.
+        1 = edge triggered
+        4 = level triggered
+
+      The 4th cell is a phandle to a node describing a set of CPUs this
+      interrupt is affine to. The interrupt must be a PPI, and the node
+      pointed must be a subnode of the "ppi-partitions" subnode. For
+      interrupt types other than PPI or PPIs that are not partitionned,
+      this cell must be zero. See the "ppi-partitions" node description
+      below.
+
+      Cells 5 and beyond are reserved for future use and must have a value
+      of 0 if present.
+    enum: [ 3, 4 ]
+
+  reg:
+    description: |
+      Specifies base physical address(s) and size of the GIC
+      registers, in the following order:
+      - GIC Distributor interface (GICD)
+      - GIC Redistributors (GICR), one range per redistributor region
+      - GIC CPU interface (GICC)
+      - GIC Hypervisor interface (GICH)
+      - GIC Virtual CPU interface (GICV)
+
+      GICC, GICH and GICV are optional, but must be described if the CPUs
+      support them. Examples of such CPUs are ARM's implementations of the
+      ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+      A73 (this list is not exhaustive).
+
+    minItems: 2
+    maxItems: 4096   # Should be enough?
+
+  interrupts:
+    description:
+      Interrupt source of the VGIC maintenance interrupt.
+    maxItems: 1
+
+  redistributor-stride:
+    description:
+      If using padding pages, specifies the stride of consecutive
+      redistributors. Must be a multiple of 64kB.
+    $ref: /schemas/types.yaml#/definitions/uint64
+    multipleOf: 0x10000
+    exclusiveMinimum: 0
+
+  "#redistributor-regions":
+    description:
+      The number of independent contiguous regions occupied by the
+      redistributors. Required if more than one such region is present.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4096
+
+  dma-noncoherent:
+    description:
+      Present if the GIC redistributors permit programming shareability
+      and cacheability attributes but are connected to a non-coherent
+      downstream interconnect.
+
+  msi-controller:
+    description:
+      Only present if the Message Based Interrupt functionality is
+      being exposed by the HW, and the mbi-ranges property present.
+
+  mbi-ranges:
+    description:
+      A list of pairs <intid span>, where "intid" is the first SPI of a range
+      that can be used an MBI, and "span" the size of that range. Multiple
+      ranges can be provided.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  mbi-alias:
+    description:
+      Address property. Base address of an alias of the GICD region containing
+      only the {SET,CLR}SPI registers to be used if isolation is required,
+      and if supported by the HW.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 1
+      maxItems: 2
+
+  ppi-partitions:
+    type: object
+    additionalProperties: false
+    description:
+      PPI affinity can be expressed as a single "ppi-partitions" node,
+      containing a set of sub-nodes.
+    patternProperties:
+      "^interrupt-partition-[0-9]+$":
+        type: object
+        additionalProperties: false
+        properties:
+          affinity:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - affinity
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  mediatek,broken-save-restore-fw:
+    type: boolean
+    description:
+      Asserts that the firmware on this device has issues saving and restoring
+      GICR registers when the GIC redistributors are powered off.
+
+dependencies:
+  mbi-ranges: [ msi-controller ]
+  msi-controller: [ mbi-ranges ]
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^gic-its@": false
+  "^interrupt-controller@[0-9a-f]+$": false
+  # msi-controller is preferred, but allow other names
+  "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
+    type: object
+    description:
+      GICv3 has one or more Interrupt Translation Services (ITS) that are
+      used to route Message Signalled Interrupts (MSI) to the CPUs.
+    properties:
+      compatible:
+        const: arm,gic-v3-its
+
+      dma-noncoherent:
+        description:
+          Present if the GIC ITS permits programming shareability and
+          cacheability attributes but is connected to a non-coherent
+          downstream interconnect.
+
+      msi-controller: true
+
+      "#msi-cells":
+        description:
+          The single msi-cell is the DeviceID of the device which will generate
+          the MSI.
+        const: 1
+
+      reg:
+        description:
+          Specifies the base physical address and size of the ITS registers.
+        maxItems: 1
+
+      socionext,synquacer-pre-its:
+        description:
+          (u32, u32) tuple describing the untranslated
+          address and size of the pre-ITS window.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 2
+          maxItems: 2
+
+    required:
+      - compatible
+      - msi-controller
+      - "#msi-cells"
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    gic: interrupt-controller@2cf00000 {
+      compatible = "arm,gic-v3";
+      #interrupt-cells = <3>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+      interrupt-controller;
+      reg = <0x2f000000 0x10000>,  // GICD
+            <0x2f100000 0x200000>,  // GICR
+            <0x2c000000 0x2000>,  // GICC
+            <0x2c010000 0x2000>,  // GICH
+            <0x2c020000 0x2000>;  // GICV
+      interrupts = <1 9 4>;
+
+      msi-controller;
+      mbi-ranges = <256 128>;
+
+      msi-controller@2c200000 {
+        compatible = "arm,gic-v3-its";
+        msi-controller;
+        #msi-cells = <1>;
+        reg = <0x2c200000 0x20000>;
+      };
+    };
+
+  - |
+    interrupt-controller@2c010000 {
+      compatible = "arm,gic-v3";
+      #interrupt-cells = <4>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+      interrupt-controller;
+      redistributor-stride = <0x0 0x40000>;  // 256kB stride
+      #redistributor-regions = <2>;
+      reg = <0x2c010000 0x10000>,  // GICD
+            <0x2d000000 0x800000>,  // GICR 1: CPUs 0-31
+            <0x2e000000 0x800000>,  // GICR 2: CPUs 32-63
+            <0x2c040000 0x2000>,  // GICC
+            <0x2c060000 0x2000>,  // GICH
+            <0x2c080000 0x2000>;  // GICV
+      interrupts = <1 9 4 0>;
+
+      msi-controller@2c200000 {
+        compatible = "arm,gic-v3-its";
+        msi-controller;
+        #msi-cells = <1>;
+        reg = <0x2c200000 0x20000>;
+      };
+
+      msi-controller@2c400000 {
+        compatible = "arm,gic-v3-its";
+        msi-controller;
+        #msi-cells = <1>;
+        reg = <0x2c400000 0x20000>;
+      };
+
+      ppi-partitions {
+        part0: interrupt-partition-0 {
+          affinity = <&cpu0>, <&cpu2>;
+        };
+
+        part1: interrupt-partition-1 {
+          affinity = <&cpu1>, <&cpu3>;
+        };
+      };
+    };
+
+
+    device@0 {
+      reg = <0 4>;
+      interrupts = <1 1 4 &part0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
new file mode 100644
index 0000000000..a2846e4934
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller v1 and v2
+
+maintainers:
+  - Marc Zyngier <marc.zyngier@arm.com>
+
+description: |+
+  ARM SMP cores are often associated with a GIC, providing per processor
+  interrupts (PPI), shared processor interrupts (SPI) and software
+  generated interrupts (SGI).
+
+  Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+  Secondary GICs are cascaded into the upward interrupt controller and do not
+  have PPIs or SGIs.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - arm,arm11mp-gic
+              - arm,cortex-a15-gic
+              - arm,cortex-a7-gic
+              - arm,cortex-a5-gic
+              - arm,cortex-a9-gic
+              - arm,eb11mp-gic
+              - arm,gic-400
+              - arm,pl390
+              - arm,tc11mp-gic
+              - qcom,msm-8660-qgic
+              - qcom,msm-qgic2
+
+      - items:
+          - const: arm,gic-400
+          - enum:
+              - arm,cortex-a15-gic
+              - arm,cortex-a7-gic
+
+      - items:
+          - const: arm,arm1176jzf-devchip-gic
+          - const: arm,arm11mp-gic
+
+      - items:
+          - const: brcm,brahma-b15-gic
+          - const: arm,cortex-a15-gic
+
+      - oneOf:
+          - const: nvidia,tegra210-agic
+          - items:
+              - enum:
+                  - nvidia,tegra186-agic
+                  - nvidia,tegra194-agic
+                  - nvidia,tegra234-agic
+              - const: nvidia,tegra210-agic
+
+  interrupt-controller: true
+
+  "#address-cells":
+    enum: [ 0, 1, 2 ]
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+      interrupts.
+
+      The 2nd cell contains the interrupt number for the interrupt type.
+      SPI interrupts are in the range [0-987].  PPI interrupts are in the
+      range [0-15].
+
+      The 3rd cell is the flags, encoded as follows:
+        bits[3:0] trigger type and level flags.
+          1 = low-to-high edge triggered
+          2 = high-to-low edge triggered (invalid for SPIs)
+          4 = active high level-sensitive
+          8 = active low level-sensitive (invalid for SPIs).
+        bits[15:8] PPI interrupt cpu mask.  Each bit corresponds to each of
+        the 8 possible cpus attached to the GIC.  A bit set to '1' indicated
+        the interrupt is wired to that CPU.  Only valid for PPI interrupts.
+        Also note that the configurability of PPI interrupts is IMPLEMENTATION
+        DEFINED and as such not guaranteed to be present (most SoC available
+        in 2014 seem to ignore the setting of this flag and use the hardware
+        default value).
+
+  reg:
+    description: |
+      Specifies base physical address(s) and size of the GIC registers. The
+      first region is the GIC distributor register base and size. The 2nd region
+      is the GIC cpu interface register base and size.
+
+      For GICv2 with virtualization extensions, additional regions are
+      required for specifying the base physical address and size of the VGIC
+      registers. The first additional region is the GIC virtual interface
+      control register base and size. The 2nd additional region is the GIC
+      virtual cpu interface register base and size.
+    minItems: 2
+    maxItems: 4
+
+  ranges: true
+
+  interrupts:
+    description: Interrupt source of the parent interrupt controller on
+      secondary GICs, or VGIC maintenance interrupt on primary GIC (see
+      below).
+    maxItems: 1
+
+  cpu-offset:
+    description: per-cpu offset within the distributor and cpu interface
+      regions, used when the GIC doesn't have banked registers. The offset
+      is cpu-offset * cpu-nr.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description: List of names for the GIC clock input(s). Valid clock names
+      depend on the GIC variant.
+    oneOf:
+      - const: ic_clk # for "arm,arm11mp-gic"
+      - const: PERIPHCLKEN # for "arm,cortex-a15-gic"
+      - items: # for "arm,cortex-a9-gic"
+          - const: PERIPHCLK
+          - const: PERIPHCLKEN
+      - const: clk  # for "arm,gic-400" and "nvidia,tegra210"
+      - const: gclk # for "arm,pl390"
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^v2m@[0-9a-f]+$":
+    type: object
+    description: |
+      * GICv2m extension for MSI/MSI-x support (Optional)
+
+      Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
+      This is enabled by specifying v2m sub-node(s).
+
+    properties:
+      compatible:
+        const: arm,gic-v2m-frame
+
+      msi-controller: true
+
+      reg:
+        maxItems: 1
+        description: GICv2m MSI interface register base and size
+
+      arm,msi-base-spi:
+        description: When the MSI_TYPER register contains an incorrect value,
+          this property should contain the SPI base of the MSI frame, overriding
+          the HW value.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      arm,msi-num-spis:
+        description: When the MSI_TYPER register contains an incorrect value,
+          this property should contain the number of SPIs assigned to the
+          frame, overriding the HW value.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - compatible
+      - msi-controller
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    // GICv1
+    intc: interrupt-controller@fff11000 {
+      compatible = "arm,cortex-a9-gic";
+      #interrupt-cells = <3>;
+      #address-cells = <1>;
+      interrupt-controller;
+      reg = <0xfff11000 0x1000>,
+            <0xfff10100 0x100>;
+    };
+
+  - |
+    // GICv2
+    interrupt-controller@2c001000 {
+      compatible = "arm,cortex-a15-gic";
+      #interrupt-cells = <3>;
+      interrupt-controller;
+      reg = <0x2c001000 0x1000>,
+            <0x2c002000 0x2000>,
+            <0x2c004000 0x2000>,
+            <0x2c006000 0x2000>;
+      interrupts = <1 9 0xf04>;
+    };
+
+  - |
+    // GICv2m extension for MSI/MSI-x support
+    interrupt-controller@e1101000 {
+      compatible = "arm,gic-400";
+      #interrupt-cells = <3>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      interrupt-controller;
+      interrupts = <1 8 0xf04>;
+      ranges = <0 0xe1100000 0x100000>;
+      reg = <0xe1110000 0x01000>,
+            <0xe112f000 0x02000>,
+            <0xe1140000 0x10000>,
+            <0xe1160000 0x10000>;
+
+      v2m0: v2m@80000 {
+        compatible = "arm,gic-v2m-frame";
+        msi-controller;
+        reg = <0x80000 0x1000>;
+      };
+
+      //...
+
+      v2mN: v2m@90000 {
+        compatible = "arm,gic-v2m-frame";
+        msi-controller;
+        reg = <0x90000 0x1000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
new file mode 100644
index 0000000000..386ab37a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
@@ -0,0 +1,36 @@
+* ARM Nested Vector Interrupt Controller (NVIC)
+
+The NVIC provides an interrupt controller that is tightly coupled to
+Cortex-M based processor cores.  The NVIC implemented on different SoCs
+vary in the number of interrupts and priority bits per interrupt.
+
+Main node required properties:
+
+- compatible : should be one of:
+	"arm,v6m-nvic"
+	"arm,v7m-nvic"
+	"arm,v8m-nvic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.  The type shall be a <u32> and the value shall be 2.
+
+  The 1st cell contains the interrupt number for the interrupt type.
+
+  The 2nd cell is the priority of the interrupt.
+
+- reg : Specifies base physical address(s) and size of the NVIC registers.
+  This is at a fixed address (0xe000e100) and size (0xc00).
+
+- arm,num-irq-priority-bits: The number of priority bits implemented by the
+  given SoC
+
+Example:
+
+	intc: interrupt-controller@e000e100 {
+		compatible = "arm,v7m-nvic";
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0xe000e100 0xc00>;
+		arm,num-irq-priority-bits = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
new file mode 100644
index 0000000000..ea939f54c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
@@ -0,0 +1,38 @@
+* ARM Versatile FPGA interrupt controller
+
+One or more FPGA IRQ controllers can be synthesized in an ARM reference board
+such as the Integrator or Versatile family. The output of these different
+controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
+instance can handle up to 32 interrupts.
+
+Required properties:
+- compatible: "arm,versatile-fpga-irq"
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts.  Must be 1
+  as the FPGA IRQ controller has no configuration options for interrupt
+  sources.  The cell is a u32 and defines the interrupt number.
+- reg: The register bank for the FPGA interrupt controller.
+- clear-mask: a u32 number representing the mask written to clear all IRQs
+  on the controller at boot for example.
+- valid-mask: a u32 number representing a bit mask determining which of
+  the interrupts are valid. Unconnected/unused lines are set to 0, and
+  the system till not make it possible for devices to request these
+  interrupts.
+
+The "oxsemi,ox810se-rps-irq" compatible is deprecated.
+
+Example:
+
+pic: pic@14000000 {
+        compatible = "arm,versatile-fpga-irq";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0x14000000 0x100>;
+        clear-mask = <0xffffffff>;
+        valid-mask = <0x003fffff>;
+};
+
+Optional properties:
+- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ
+  output is simply connected to the input of another IRQ controller,
+  then the parent IRQ shall be specified in this property.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
new file mode 100644
index 0000000000..0075e72fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Vectored Interrupt Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  One or more Vectored Interrupt Controllers (VIC's) can be connected in an
+  ARM system for interrupt routing.  For multiple controllers they can either
+  be nested or have the outputs wire-OR'd together.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - arm,pl190-vic
+      - arm,pl192-vic
+      - arm,versatile-vic
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The number of cells to define the interrupts.  It must be 1 as the
+      VIC has no configuration options for interrupt sources. The single
+      cell defines the interrupt number.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  valid-mask:
+    description:
+      A one cell big bit mask of valid interrupt sources. Each bit
+      represents single interrupt source, starting from source 0 at
+      LSb and ending at source 31 at MSb. A bit that is set means
+      that the source is wired and clear means otherwise. If unspecified,
+      defaults to all valid.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  valid-wakeup-mask:
+    description:
+      A one cell big bit mask of interrupt sources that can be configured
+      as wake up source for the system. Order of bits is the same as for
+      valid-mask property. A set bit means that this interrupt source
+      can be configured as a wake up source for the system. If unspecied,
+      defaults to all interrupt sources configurable as wake up sources.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // PL192 VIC
+    vic0: interrupt-controller@60000 {
+      compatible = "arm,pl192-vic";
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      reg = <0x60000 0x1000>;
+
+      valid-mask = <0xffffff7f>;
+      valid-wakeup-mask = <0x0000ff7f>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
new file mode 100644
index 0000000000..033cc82e56
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
@@ -0,0 +1,25 @@
+Device tree configuration for the I2C Interrupt Controller on the AST24XX and
+AST25XX SoCs.
+
+Required Properties:
+- #address-cells	: should be 1
+- #size-cells 		: should be 1
+- #interrupt-cells 	: should be 1
+- compatible 		: should be "aspeed,ast2400-i2c-ic"
+			  or "aspeed,ast2500-i2c-ic"
+- reg			: address start and range of controller
+- interrupts		: interrupt number
+- interrupt-controller	: denotes that the controller receives and fires
+			  new interrupts for child busses
+
+Example:
+
+i2c_ic: interrupt-controller@0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <1>;
+	compatible = "aspeed,ast2400-i2c-ic";
+	reg = <0x0 0x40>;
+	interrupts = <12>;
+	interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
new file mode 100644
index 0000000000..e3fea0758d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -0,0 +1,23 @@
+Aspeed Vectored Interrupt Controller
+
+These bindings are for the Aspeed interrupt controller. The AST2400 and
+AST2500 SoC families include a legacy register layout before a re-designed
+layout, but the bindings do not prescribe the use of one or the other.
+
+Required properties:
+
+- compatible : "aspeed,ast2400-vic"
+               "aspeed,ast2500-vic"
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+Example:
+
+ vic: interrupt-controller@1e6c0080 {
+      compatible = "aspeed,ast2400-vic";
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      reg = <0x1e6c0080 0x80>;
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
new file mode 100644
index 0000000000..251ed44171
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
@@ -0,0 +1,23 @@
+Aspeed AST25XX and AST26XX SCU Interrupt Controller
+
+Required Properties:
+ - #interrupt-cells		: must be 1
+ - compatible			: must be "aspeed,ast2500-scu-ic",
+				  "aspeed,ast2600-scu-ic0" or
+				  "aspeed,ast2600-scu-ic1"
+ - interrupts			: interrupt from the parent controller
+ - interrupt-controller		: indicates that the controller receives and
+				  fires new interrupts for child busses
+
+Example:
+
+    syscon@1e6e2000 {
+        ranges = <0 0x1e6e2000 0x1a8>;
+
+        scu_ic: interrupt-controller@18 {
+            #interrupt-cells = <1>;
+            compatible = "aspeed,ast2500-scu-ic";
+            interrupts = <21>;
+            interrupt-controller;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
new file mode 100644
index 0000000000..7079d44bf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@@ -0,0 +1,43 @@
+* Advanced Interrupt Controller (AIC)
+
+Required properties:
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
+  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+      Valid combinations are 1, 2, 3, 4, 8.
+      Default flag for internal sources should be set to 4 (active high).
+  The third cell is used to specify the irq priority from 0 (lowest) to 7
+  (highest).
+- reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
+
+Examples:
+	/*
+	 * AIC
+	 */
+	aic: interrupt-controller@fffff000 {
+		compatible = "atmel,at91rm9200-aic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0xfffff000 0x200>;
+	};
+
+	/*
+	 * An interrupt generating device that is wired to an AIC.
+	 */
+	dma: dma-controller@ffffec00 {
+		compatible = "atmel,at91sam9g45-dma";
+		reg = <0xffffec00 0x200>;
+		interrupts = <21 4 5>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
new file mode 100644
index 0000000000..bdd173056f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -0,0 +1,131 @@
+BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
+
+The BCM2835 contains a custom top-level interrupt controller, which supports
+72 interrupt sources using a 2-level register scheme. The interrupt
+controller, or the HW block containing it, is referred to occasionally
+as "armctrl" in the SoC documentation, hence naming of this binding.
+
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+                 "brcm,bcm2836-armctrl-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 2.
+
+  The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+  pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+  1/2" register.
+
+  The 2nd cell contains the interrupt number within the bank. Valid values
+  are 0..7 for bank 0, and 0..31 for bank 1.
+
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupts : Specifies the interrupt on the parent for this interrupt
+  controller to handle.
+
+The interrupt sources are as follows:
+
+Bank 0:
+0: ARM_TIMER
+1: ARM_MAILBOX
+2: ARM_DOORBELL_0
+3: ARM_DOORBELL_1
+4: VPU0_HALTED
+5: VPU1_HALTED
+6: ILLEGAL_TYPE0
+7: ILLEGAL_TYPE1
+
+Bank 1:
+0: TIMER0
+1: TIMER1
+2: TIMER2
+3: TIMER3
+4: CODEC0
+5: CODEC1
+6: CODEC2
+7: VC_JPEG
+8: ISP
+9: VC_USB
+10: VC_3D
+11: TRANSPOSER
+12: MULTICORESYNC0
+13: MULTICORESYNC1
+14: MULTICORESYNC2
+15: MULTICORESYNC3
+16: DMA0
+17: DMA1
+18: VC_DMA2
+19: VC_DMA3
+20: DMA4
+21: DMA5
+22: DMA6
+23: DMA7
+24: DMA8
+25: DMA9
+26: DMA10
+27: DMA11-14 - shared interrupt for DMA 11 to 14
+28: DMAALL - triggers on all dma interrupts (including channel 15)
+29: AUX
+30: ARM
+31: VPUDMA
+
+Bank 2:
+0: HOSTPORT
+1: VIDEOSCALER
+2: CCP2TX
+3: SDC
+4: DSI0
+5: AVE
+6: CAM0
+7: CAM1
+8: HDMI0
+9: HDMI1
+10: PIXELVALVE1
+11: I2CSPISLV
+12: DSI1
+13: PWA0
+14: PWA1
+15: CPR
+16: SMI
+17: GPIO0
+18: GPIO1
+19: GPIO2
+20: GPIO3
+21: VC_I2C
+22: VC_SPI
+23: VC_I2SPCM
+24: VC_SDIO
+25: VC_UART
+26: SLIMBUS
+27: VEC
+28: CPG
+29: RNG
+30: VC_ARASANSDIO
+31: AVSPMON
+
+Example:
+
+/* BCM2835, first level */
+intc: interrupt-controller {
+	compatible = "brcm,bcm2835-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
new file mode 100644
index 0000000000..8ced1696c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
@@ -0,0 +1,37 @@
+BCM2836 per-CPU interrupt controller
+
+The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+events, and SMP IPIs.  One of the CPUs may receive interrupts for the
+peripheral (GPU) events, which chain to the BCM2835-style interrupt
+controller.
+
+Required properties:
+
+- compatible:	 	Should be "brcm,bcm2836-l1-intc"
+- reg:			Specifies base physical address and size of the
+			  registers
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Specifies the number of cells needed to encode an
+			  interrupt source. The value shall be 2
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+The interrupt sources are as follows:
+
+0: CNTPSIRQ
+1: CNTPNSIRQ
+2: CNTHPIRQ
+3: CNTVIRQ
+8: GPU_FAST
+9: PMU_FAST
+
+Example:
+
+local_intc: local_intc {
+	compatible = "brcm,bcm2836-l1-intc";
+	reg = <0x40000000 0x100>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	interrupt-parent = <&local_intc>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
new file mode 100644
index 0000000000..2bc19b1ac8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
@@ -0,0 +1,55 @@
+Broadcom BCM6345-style Level 1 interrupt controller
+
+This block is a first level interrupt controller that is typically connected
+directly to one of the HW INT lines on each CPU.
+
+Key elements of the hardware design include:
+
+- 32, 64 or 128 incoming level IRQ lines
+
+- Most onchip peripherals are wired directly to an L1 input
+
+- A separate instance of the register set for each CPU, allowing individual
+  peripheral IRQs to be routed to any CPU
+
+- Contains one or more enable/status word pairs per CPU
+
+- No atomic set/clear operations
+
+- No polarity/level/edge settings
+
+- No FIFO or priority encoder logic; software is expected to read all
+  2-4 status words to determine which IRQs are pending
+
+Required properties:
+
+- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
+- reg: specifies the base physical address and size of the registers;
+  the number of supported IRQs is inferred from the size argument
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+  node; valid values depend on the type of parent interrupt controller
+
+If multiple reg ranges and interrupt-parent entries are present on an SMP
+system, the driver will allow IRQ SMP affinity to be set up through the
+/proc/irq/ interface.  In the simplest possible configuration, only one
+reg range and one interrupt-parent is needed.
+
+The driver operates in native CPU endian by default, there is no support for
+specifying an alternative endianness.
+
+Example:
+
+periph_intc: interrupt-controller@10000000 {
+        compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
+        reg = <0x10000020 0x20>,
+              <0x10000040 0x20>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>, <3>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 0000000000..5ecb6faa70
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
+  since BCM7038 has contained this hardware.
+
+  Key elements of the hardware design include:
+
+   - 64, 96, 128, or 160 incoming level IRQ lines
+
+   - Most onchip peripherals are wired directly to an L1 input
+
+   - A separate instance of the register set for each CPU, allowing individual
+     peripheral IRQs to be routed to any CPU
+
+   - Atomic mask/unmask operations
+
+   - No polarity/level/edge settings
+
+   - No FIFO or priority encoder logic; software is expected to read all
+     2-5 status words to determine which IRQs are pending
+
+   If multiple reg ranges and interrupt-parent entries are present on an SMP
+   system, the driver will allow IRQ SMP affinity to be set up through the
+   /proc/irq/ interface.  In the simplest possible configuration, only one
+   reg range and one interrupt-parent is needed.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-l1-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+      the number of supported IRQs is inferred from the size argument
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: >
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L1 controller can be used as a
+      wakeup source for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      If present, a bit mask to indicate which interrupts have already been
+      configured by the firmware and should be left unmanaged. This should
+      have one 32-bit word per status/set/clear/mask group.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_intc: interrupt-controller@1041a400 {
+      compatible = "brcm,bcm7038-l1-intc";
+      reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&cpu_intc>;
+      interrupts = <2>, <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 0000000000..786f242639
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X           (not connected)
+  ..
+  31 ........................ X
+
+  The BCM3380 Level 1 / Level 2 interrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
+
+  reg:
+    minItems: 1
+    maxItems: 4
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  brcm,int-map-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 1
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+      compatible = "brcm,bcm7120-l2-intc";
+      interrupt-parent = <&intc>;
+      #interrupt-cells = <1>;
+      reg = <0xf0406800 0x8>;
+      interrupt-controller;
+      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+      brcm,int-map-mask = <0xeb8>, <0x140>;
+      brcm,int-fwd-mask = <0x7>;
+    };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 0000000000..8961afca96
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,hif-spi-l2-intc
+              - brcm,upg-aux-aon-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - enum:
+              - brcm,bcm2711-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - const: brcm,bcm7271-l2-intc
+      - items:
+          - const: brcm,l2-intc
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    hif_intr2_intc: interrupt-controller@f0441000 {
+      compatible = "brcm,l2-intc";
+      reg = <0xf0441000 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&intc>;
+      interrupts = <0x0 0x20 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt
new file mode 100644
index 0000000000..d4de980e55
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt
@@ -0,0 +1,18 @@
+* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX)
+
+Required properties:
+- compatible: Should be "cdns,xtensa-mx".
+
+Remaining properties have exact same meaning as in Xtensa PIC
+(see cdns,xtensa-pic.txt).
+
+Examples:
+	pic: pic {
+		compatible = "cdns,xtensa-mx";
+		/* one cell: internal irq number,
+		 * two cells: second cell == 0: internal irq number
+		 *            second cell == 1: external irq number
+		 */
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt
new file mode 100644
index 0000000000..026ef4cfc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt
@@ -0,0 +1,25 @@
+* Xtensa built-in Programmable Interrupt Controller (PIC)
+
+Required properties:
+- compatible: Should be "cdns,xtensa-pic".
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts.
+  It may be either 1 or 2.
+  When it's 1, the first cell is the internal IRQ number.
+  When it's 2, the first cell is the IRQ number, and the second cell
+  specifies whether it's internal (0) or external (1).
+  Periferals are usually connected to a fixed external IRQ, but for different
+  core variants it may be mapped to different internal IRQ.
+  IRQ sensitivity and priority are fixed for each core variant and may not be
+  changed at runtime.
+
+Examples:
+	pic: pic {
+		compatible = "cdns,xtensa-pic";
+		/* one cell: internal irq number,
+		 * two cells: second cell == 0: internal irq number
+		 *            second cell == 1: external irq number
+		 */
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
new file mode 100644
index 0000000000..969b4582ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -0,0 +1,41 @@
+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,ep7209-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID	Name	Description
+---------------------------
+1:	BLINT	Battery low (FIQ)
+3:	MCINT	Media changed (FIQ)
+4:	CSINT	CODEC sound
+5:	EINT1	External 1
+6:	EINT2	External 2
+7:	EINT3	External 3
+8:	TC1OI	TC1 under flow
+9:	TC2OI	TC2 under flow
+10:	RTCMI	RTC compare match
+11:	TINT	64Hz tick
+12:	UTXINT1	UART1 transmit FIFO half empty
+13:	URXINT1	UART1 receive FIFO half full
+14:	UMSINT	UART1 modem status changed
+15:	SSEOTI	SSI1 end of transfer
+16:	KBDINT	Keyboard
+17:	SS2RX	SSI2 receive FIFO half or greater full
+18:	SS2TX	SSI2 transmit FIFO less than half empty
+28:	UTXINT2	UART2 transmit FIFO half empty
+29:	URXINT2	UART2 receive FIFO half full
+32:	DAIINT	DAI interface (FIQ)
+
+Example:
+	intc: interrupt-controller {
+		compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
+		reg = <0x80000000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
new file mode 100644
index 0000000000..44286dcbac
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
@@ -0,0 +1,62 @@
+==============================
+C-SKY APB Interrupt Controller
+==============================
+
+C-SKY APB Interrupt Controller is a simple soc interrupt controller
+on the apb bus and we only use it as root irq controller.
+
+ - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
+ - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
+ - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
+
+=============================
+intc node bindings definition
+=============================
+
+	Description: Describes APB interrupt controller
+
+	PROPERTIES
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be "csky,apb-intc"
+				    "csky,dual-apb-intc"
+				    "csky,gx6605s-intc"
+	- #interrupt-cells
+		Usage: required
+		Value type: <u32>
+		Definition: must be <1>
+	- reg
+		Usage: required
+		Value type: <u32 u32>
+		Definition: <phyaddr size> in soc from cpu view
+	- interrupt-controller:
+		Usage: required
+	- csky,support-pulse-signal:
+		Usage: select
+		Description: to support pulse signal flag
+
+Examples:
+---------
+
+	intc: interrupt-controller@500000 {
+		compatible = "csky,apb-intc";
+		#interrupt-cells = <1>;
+		reg = <0x00500000 0x400>;
+		interrupt-controller;
+	};
+
+	intc: interrupt-controller@500000 {
+		compatible = "csky,dual-apb-intc";
+		#interrupt-cells = <1>;
+		reg = <0x00500000 0x400>;
+		interrupt-controller;
+	};
+
+	intc: interrupt-controller@500000 {
+		compatible = "csky,gx6605s-intc";
+		#interrupt-cells = <1>;
+		reg = <0x00500000 0x400>;
+		interrupt-controller;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
new file mode 100644
index 0000000000..e6bbcae4d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -0,0 +1,52 @@
+===========================================
+C-SKY Multi-processors Interrupt Controller
+===========================================
+
+C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
+SMP soc, and it also could be used in non-SMP system.
+
+Interrupt number definition:
+  0-15  : software irq, and we use 15 as our IPI_IRQ.
+ 16-31  : private  irq, and we use 16 as the co-processor timer.
+ 31-1024: common irq for soc ip.
+
+Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+ IRQ_TYPE_LEVEL_HIGH (default)
+ IRQ_TYPE_LEVEL_LOW
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+
+=============================
+intc node bindings definition
+=============================
+
+	Description: Describes SMP interrupt controller
+
+	PROPERTIES
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be "csky,mpintc"
+	- #interrupt-cells
+		Usage: required
+		Value type: <u32>
+		Definition: <2>
+	- interrupt-controller:
+		Usage: required
+
+Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
+---------
+#include <dt-bindings/interrupt-controller/irq.h>
+
+	intc: interrupt-controller {
+		compatible = "csky,mpintc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	device: device-example {
+		...
+		interrupts = <34 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&intc>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
new file mode 100644
index 0000000000..42d41ec84c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
@@ -0,0 +1,21 @@
+Conexant Digicolor Interrupt Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-ic"
+- reg : Specifies base physical address and size of the interrupt controller
+  registers (IC) area
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- syscon: A phandle to the syscon node describing UC registers
+
+Example:
+
+	intc: interrupt-controller@f0000040 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000040 0x40>;
+		syscon = <&uc_regs>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
new file mode 100644
index 0000000000..888b2b9f70
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
@@ -0,0 +1,17 @@
+EZchip NPS Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ezchip,nps400-ic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "ezchip,nps400-ic";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt
new file mode 100644
index 0000000000..24428d47f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt
@@ -0,0 +1,25 @@
+* Faraday Technologt FTINTC010 interrupt controller
+
+This interrupt controller is a stock IP block from Faraday Technology found
+in the Gemini SoCs and other designs.
+
+Required properties:
+- compatible: must be one of
+  "faraday,ftintc010"
+  "cortina,gemini-interrupt-controller" (deprecated)
+- reg: The register bank for the interrupt controller.
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts.
+  Must be 2 as the controller can specify level or rising edge
+  IRQs. The bindings follows the standard binding for controllers
+  with two cells specified in
+  interrupt-controller/interrupts.txt
+
+Example:
+
+interrupt-controller@48000000 {
+	compatible = "faraday,ftintc010"
+	reg = <0x48000000 0x1000>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 0000000000..985bfa4f6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-intmux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Should contain the parent interrupt lines (up to 8) used to multiplex
+      the input interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@37400000 {
+        compatible = "fsl,imx-intmux";
+        reg = <0x37400000 0x1000>;
+        interrupts = <0 16 4>,
+                     <0 17 4>,
+                     <0 18 4>,
+                     <0 19 4>,
+                     <0 20 4>,
+                     <0 21 4>,
+                     <0 22 4>,
+                     <0 23 4>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+        clocks = <&clk>;
+        clock-names = "ipg";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
new file mode 100644
index 0000000000..20ad4ad82a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,irqsteer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IRQSTEER Interrupt Multiplexer
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx-irqsteer
+      - items:
+          - const: fsl,imx8m-irqsteer
+          - const: fsl,imx-irqsteer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      should contain the up to 8 parent interrupt lines used to multiplex
+      the input interrupts. They should be specified sequentially from
+      output 0 to 7.
+    items:
+      - description: output interrupt 0
+      - description: output interrupt 1
+      - description: output interrupt 2
+      - description: output interrupt 3
+      - description: output interrupt 4
+      - description: output interrupt 5
+      - description: output interrupt 6
+      - description: output interrupt 7
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  fsl,channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      u32 value representing the output channel that all input IRQs should be
+      steered into.
+
+  fsl,num-irqs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      u32 value representing the number of input interrupts of this channel,
+      should be multiple of 32 input interrupts and up to 512 interrupts.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - interrupt-controller
+  - "#interrupt-cells"
+  - fsl,channel
+  - fsl,num-irqs
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@32e2d000 {
+        compatible = "fsl,imx-irqsteer";
+        reg = <0x32e2d000 0x1000>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+        clock-names = "ipg";
+        fsl,channel = <0>;
+        fsl,num-irqs = <64>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 0000000000..887e565b95
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+  LX216xA) support inverting the polarity of certain external interrupt
+  lines.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,ls1021a-extirq
+          - fsl,ls1043a-extirq
+          - fsl,ls1088a-extirq
+      - items:
+          - enum:
+              - fsl,ls1046a-extirq
+          - const: fsl,ls1043a-extirq
+      - items:
+          - enum:
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+          - const: fsl,ls1088a-extirq
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the Interrupt Polarity Control Register (INTPCR) in the
+      SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+  interrupt-map:
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1021a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 6
+          maxItems: 6
+        interrupt-map-mask:
+          items:
+            - const: 0x7
+            - const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1043a-extirq
+              - fsl,ls1046a-extirq
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 12
+          maxItems: 12
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    interrupt-controller@1ac {
+            compatible = "fsl,ls1021a-extirq";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0x1ac 4>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <0x7 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
new file mode 100644
index 0000000000..454ce04d67
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -0,0 +1,30 @@
+* Freescale Layerscape SCFG PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "fsl,<soc-name>-msi" to identify
+	      Layerscape PCIe MSI controller block such as:
+              "fsl,ls1021a-msi"
+              "fsl,ls1043a-msi"
+              "fsl,ls1046a-msi"
+              "fsl,ls1043a-v1.1-msi"
+              "fsl,ls1012a-msi"
+- msi-controller: indicates that this is a PCIe MSI controller node
+- reg: physical base address of the controller and length of memory mapped.
+- interrupts: an interrupt to the parent interrupt controller.
+
+This interrupt controller hardware is a second level interrupt controller that
+is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+platforms. If interrupt-parent is not provided, the default parent interrupt
+controller will be used.
+Each PCIe node needs to have property msi-parent that points to
+MSI controller node
+
+Examples:
+
+	msi1: msi-controller@1571000 {
+		compatible = "fsl,ls1043a-msi";
+		reg = <0x0 0x1571000 0x0 0x8>,
+		msi-controller;
+		interrupts = <0 116 0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 0000000000..799ae5c3e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        interrupt-controller;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
new file mode 100644
index 0000000000..35f752706e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
@@ -0,0 +1,30 @@
+Android Goldfish PIC
+
+Android Goldfish programmable interrupt device used by Android
+emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-pic"
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example for mips when used in cascade mode:
+
+        cpuintc {
+                #interrupt-cells = <0x1>;
+                #address-cells = <0>;
+                interrupt-controller;
+                compatible = "mti,cpu-interrupt-controller";
+        };
+
+        interrupt-controller@1f000000 {
+                compatible = "google,goldfish-pic";
+                reg = <0x1f000000 0x1000>;
+
+                interrupt-controller;
+                #interrupt-cells = <0x1>;
+
+                interrupt-parent = <&cpuintc>;
+                interrupts = <0x2>;
+        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
new file mode 100644
index 0000000000..a6813a071f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -0,0 +1,84 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and generate the
+interrupt by writing ITS register.
+
+The mbigen chip and devices connect to mbigen have the following properties:
+
+Mbigen main node required properties:
+-------------------------------------------
+- compatible: Should be "hisilicon,mbigen-v2"
+
+- reg: Specifies the base physical address and size of the Mbigen
+  registers.
+
+Mbigen sub node required properties:
+------------------------------------------
+- interrupt controller: Identifies the node as an interrupt controller
+
+- msi-parent: Specifies the MSI controller this mbigen use.
+  For more detail information,please refer to the generic msi-parent binding in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+- num-pins: the total number of pins implemented in this Mbigen
+  instance.
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 2.
+
+  The 1st cell is hardware pin number of the interrupt.This number is local to
+  each mbigen chip and in the range from 0 to the maximum interrupts number
+  of the mbigen.
+
+  The 2nd cell is the interrupt trigger type.
+	The value of this cell should be:
+	1: rising edge triggered
+	or
+	4: high level triggered
+
+Examples:
+
+	mbigen_chip_dsa {
+			compatible = "hisilicon,mbigen-v2";
+			reg = <0x0 0xc0080000 0x0 0x10000>;
+
+			mbigen_gmac:intc_gmac {
+				interrupt-controller;
+				msi-parent = <&its_dsa 0x40b1c>;
+				num-pins = <9>;
+				#interrupt-cells = <2>;
+			};
+
+			mbigen_i2c:intc_i2c {
+				interrupt-controller;
+				msi-parent = <&its_dsa 0x40b0e>;
+				num-pins = <2>;
+				#interrupt-cells = <2>;
+			};
+	};
+
+Devices connect to mbigen required properties:
+----------------------------------------------------
+-interrupts:Specifies the interrupt source.
+ For the specific information of each cell in this property,please refer to
+ the "interrupt-cells" description mentioned above.
+
+Examples:
+	gmac0: ethernet@c2080000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0xc2080000 0 0x20000>,
+		      <0 0xc0000000 0 0x1000>;
+		interrupt-parent  = <&mbigen_device_gmac>;
+		interrupts =	<656 1>,
+				<657 1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
new file mode 100644
index 0000000000..afb3dd80b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79RC32434 Interrupt Controller
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  "#interrupt-cells":
+    const: 1
+
+  compatible:
+    const: idt,32434-pic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    idtpic3: interrupt-controller@3800c {
+        compatible = "idt,32434-pic";
+        reg = <0x3800c 0x0c>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt
new file mode 100644
index 0000000000..5dc2a55ad8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt
@@ -0,0 +1,105 @@
+* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding
+
+This binding specifies what properties must be available in the device tree
+representation of a PDC IRQ controller. This has a number of input interrupt
+lines which can wake the system, and are passed on through output interrupt
+lines.
+
+Required properties:
+
+    - compatible: Specifies the compatibility list for the interrupt controller.
+      The type shall be <string> and the value shall include "img,pdc-intc".
+
+    - reg: Specifies the base PDC physical address(s) and size(s) of the
+      addressable register space. The type shall be <prop-encoded-array>.
+
+    - interrupt-controller: The presence of this property identifies the node
+      as an interrupt controller. No property value shall be defined.
+
+    - #interrupt-cells: Specifies the number of cells needed to encode an
+      interrupt source. The type shall be a <u32> and the value shall be 2.
+
+    - num-perips: Number of waking peripherals.
+
+    - num-syswakes: Number of SysWake inputs.
+
+    - interrupts: List of interrupt specifiers. The first specifier shall be the
+      shared SysWake interrupt, and remaining specifies shall be PDC peripheral
+      interrupts in order.
+
+* Interrupt Specifier Definition
+
+  Interrupt specifiers consists of 2 cells encoded as follows:
+
+    - <1st-cell>: The interrupt-number that identifies the interrupt source.
+                    0-7:  Peripheral interrupts
+                    8-15: SysWake interrupts
+
+    - <2nd-cell>: The level-sense information, encoded using the Linux interrupt
+                  flags as follows (only 4 valid for peripheral interrupts):
+                    0 = none (decided by software)
+                    1 = low-to-high edge triggered
+                    2 = high-to-low edge triggered
+                    3 = both edge triggered
+                    4 = active-high level-sensitive (required for perip irqs)
+                    8 = active-low level-sensitive
+
+* Examples
+
+Example 1:
+
+	/*
+	 * TZ1090 PDC block
+	 */
+	pdc: pdc@02006000 {
+		// This is an interrupt controller node.
+		interrupt-controller;
+
+		// Three cells to encode interrupt sources.
+		#interrupt-cells = <2>;
+
+		// Offset address of 0x02006000 and size of 0x1000.
+		reg = <0x02006000 0x1000>;
+
+		// Compatible with Meta hardware trigger block.
+		compatible = "img,pdc-intc";
+
+		// Three peripherals are connected.
+		num-perips = <3>;
+
+		// Four SysWakes are connected.
+		num-syswakes = <4>;
+
+		interrupts = <18 4 /* level */>, /* Syswakes */
+			     <30 4 /* level */>, /* Peripheral 0 (RTC) */
+			     <29 4 /* level */>, /* Peripheral 1 (IR) */
+			     <31 4 /* level */>; /* Peripheral 2 (WDT) */
+	};
+
+Example 2:
+
+	/*
+	 * An SoC peripheral that is wired through the PDC.
+	 */
+	rtc0 {
+		// The interrupt controller that this device is wired to.
+		interrupt-parent = <&pdc>;
+
+		// Interrupt source Peripheral 0
+		interrupts = <0   /* Peripheral 0 (RTC) */
+		              4>  /* IRQ_TYPE_LEVEL_HIGH */
+	};
+
+Example 3:
+
+	/*
+	 * An interrupt generating device that is wired to a SysWake pin.
+	 */
+	touchscreen0 {
+		// The interrupt controller that this device is wired to.
+		interrupt-parent = <&pdc>;
+
+		// Interrupt source SysWake 0 that is active-low level-sensitive
+		interrupts = <8 /* SysWake0 */
+			      8 /* IRQ_TYPE_LEVEL_LOW */>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
new file mode 100644
index 0000000000..609308a5f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs interrupt controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: "^interrupt-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-intc
+          - ingenic,jz4760-intc
+          - ingenic,jz4780-intc
+      - items:
+          - enum:
+              - ingenic,jz4775-intc
+              - ingenic,jz4770-intc
+              - ingenic,jz4760b-intc
+          - const: ingenic,jz4760-intc
+      - items:
+          - const: ingenic,x1000-intc
+          - const: ingenic,jz4780-intc
+      - items:
+          - const: ingenic,jz4725b-intc
+          - const: ingenic,jz4740-intc
+
+  "#interrupt-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@10001000 {
+      compatible = "ingenic,jz4770-intc", "ingenic,jz4760-intc";
+      reg = <0x10001000 0x40>;
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml
new file mode 100644
index 0000000000..a3ac818f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-ioapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for I/O APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-ioapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ioapic1: interrupt-controller@fec00000 {
+        compatible = "intel,ce4100-ioapic";
+        reg = <0xfec00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml
new file mode 100644
index 0000000000..6b20a5fa85
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-lapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Local Advanced Programmable Interrupt Controller (LAPIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for local APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-lapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  intel,virtual-wire-mode:
+    description: Intel defines a few possible interrupt delivery
+      modes. With respect to boot/init time, mainly two interrupt
+      delivery modes are possible.
+      PIC Mode - Legacy external 8259 compliant PIC interrupt controller.
+      Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode.
+      For ACPI or MPS spec compliant systems, it is figured out by some read
+      only bit field/s available in their respective defined data structures.
+      For OF based systems, it is by default set to PIC mode.
+      But if this optional boolean property is set, then the interrupt delivery
+      mode is configured to virtual wire compatibility mode.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    lapic0: interrupt-controller@fee00000 {
+        compatible = "intel,ce4100-lapic";
+        reg = <0xfee00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        intel,virtual-wire-mode;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
new file mode 100644
index 0000000000..a02a6b5af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx XScale Networking Processors Interrupt Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This interrupt controller is found in the Intel IXP4xx processors.
+  Some processors have 32 interrupts, some have up to 64 interrupts.
+  The exact number of interrupts is determined from the compatible
+  string.
+
+  The distinct IXP4xx families with different interrupt controller
+  variations are IXP42x, IXP43x, IXP45x and IXP46x. Those four
+  families were the only ones to reach the developer and consumer
+  market.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-interrupt
+          - intel,ixp43x-interrupt
+          - intel,ixp45x-interrupt
+          - intel,ixp46x-interrupt
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    intcon: interrupt-controller@c8003000 {
+        compatible = "intel,ixp43x-interrupt";
+        reg = <0xc8003000 0x100>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
new file mode 100644
index 0000000000..4ebfa00087
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
@@ -0,0 +1,122 @@
+Specifying interrupt information for devices
+============================================
+
+1) Interrupt client nodes
+-------------------------
+
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
+
+  Example:
+	interrupt-parent = <&intc1>;
+	interrupts = <5 0>, <6 0>;
+
+The "interrupt-parent" property is used to specify the controller to which
+interrupts are routed and contains a single phandle referring to the interrupt
+controller node. This property is inherited, so it may be specified in an
+interrupt client node or in any of its parent nodes. Interrupts listed in the
+"interrupts" property are always in reference to the node's interrupt parent.
+
+The "interrupts-extended" property is a special form; useful when a node needs
+to reference multiple interrupt parents or a different interrupt parent than
+the inherited one. Each entry in this property contains both the parent phandle
+and the interrupt specifier.
+
+  Example:
+	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
+
+2) Interrupt controller nodes
+-----------------------------
+
+A device is marked as an interrupt controller with the "interrupt-controller"
+property. This is a empty, boolean property. An additional "#interrupt-cells"
+property defines the number of cells needed to specify a single interrupt.
+
+It is the responsibility of the interrupt controller's binding to define the
+length and format of the interrupt specifier. The following two variants are
+commonly used:
+
+  a) one cell
+  -----------
+  The #interrupt-cells property is set to 1 and the single cell defines the
+  index of the interrupt within the controller.
+
+  Example:
+
+	vic: intc@10140000 {
+		compatible = "arm,versatile-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x10140000 0x1000>;
+	};
+
+	sic: intc@10003000 {
+		compatible = "arm,versatile-sic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x10003000 0x1000>;
+		interrupt-parent = <&vic>;
+		interrupts = <31>; /* Cascaded to vic */
+	};
+
+  b) two cells
+  ------------
+  The #interrupt-cells property is set to 2 and the first cell defines the
+  index of the interrupt within the controller, while the second cell is used
+  to specify any of the following flags:
+    - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+
+  Example:
+
+	i2c@7000c000 {
+		gpioext: gpio-adnp@41 {
+			compatible = "ad,gpio-adnp";
+			reg = <0x41>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <160 1>;
+
+			gpio-controller;
+			#gpio-cells = <1>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			nr-gpios = <64>;
+		};
+
+		sx8634@2b {
+			compatible = "smtc,sx8634";
+			reg = <0x2b>;
+
+			interrupt-parent = <&gpioext>;
+			interrupts = <3 0x8>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			threshold = <0x40>;
+			sensitivity = <7>;
+		};
+	};
+
+3) Interrupt wakeup parent
+--------------------------
+
+Some interrupt controllers in a SoC, are always powered on and have a select
+interrupts routed to them, so that they can wakeup the SoC from suspend. These
+interrupt controllers do not fall into the category of a parent interrupt
+controller and can be specified by the "wakeup-parent" property and contain a
+single phandle referring to the wakeup capable interrupt controller.
+
+   Example:
+	wakeup-parent = <&pdc_intc>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
new file mode 100644
index 0000000000..ee2ad36f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
@@ -0,0 +1,26 @@
+J-Core Advanced Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
+  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
+  the "aic2" core with 64 interrupts.
+
+- reg: Memory region(s) for configuration. For SMP, there should be one
+  region per cpu, indexed by the sequential, zero-based hardware cpu
+  number.
+
+- interrupt-controller: Identifies the node as an interrupt controller
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+
+Example:
+
+aic: interrupt-controller@200 {
+	compatible = "jcore,aic2";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 0000000000..e8dfa6507f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The following interrupts are available. All types and levels are fixed
+  and handled by the board management controller.
+
+  ==== ============= ==================================
+   IRQ line/device   description
+  ==== ============= ==================================
+    0  RTC_INT#      Interrupt line from on-board RTC
+    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
+    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
+    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
+    4  PWR_BTN#      Event on PWR_BTN# line (P128)
+    5  SLEEP#        Event on SLEEP# line (S149)
+    6  watchdog      Interrupt of the internal watchdog
+    7  n/a           not used
+  ==== ============= ==================================
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
new file mode 100644
index 0000000000..adf989976d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPU Interrupt Controller
+
+maintainers:
+  - Liu Peibao <liupeibao@loongson.cn>
+
+properties:
+  compatible:
+    const: loongson,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "loongson,cpu-interrupt-controller";
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
new file mode 100644
index 0000000000..393c128a41
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Extended I/O Interrupt Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description: |
+  This interrupt controller is found on the Loongson-3 family chips and
+  Loongson-2K series chips and is used to distribute interrupts directly to
+  individual cores without forwarding them through the HT's interrupt line.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k0500-eiointc
+      - loongson,ls2k2000-eiointc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eiointc: interrupt-controller@1fe11600 {
+      compatible = "loongson,ls2k0500-eiointc";
+      reg = <0x1fe10000 0x10000>;
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
new file mode 100644
index 0000000000..f0acd5671b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-3 HyperTransport Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips to transmit
+  interrupts from PCH PIC connected on HyperTransport bus.
+
+properties:
+  compatible:
+    const: loongson,htpic-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Four parent interrupts that receive chained interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    htintc: interrupt-controller@1fb000080 {
+      compatible = "loongson,htpic-1.0";
+      reg = <0xfb000080 0x40>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&liointc>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                    <25 IRQ_TYPE_LEVEL_HIGH>,
+                    <26 IRQ_TYPE_LEVEL_HIGH>,
+                    <27 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
new file mode 100644
index 0000000000..1d14576390
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-3 HyperTransport Interrupt Vector Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+  This interrupt controller is found in the Loongson-3 family of chips for
+  receiving vectorized interrupts from PCH's interrupt controller.
+
+properties:
+  compatible:
+    const: loongson,htvec-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: Eight parent interrupts that receive chained interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    htvec: interrupt-controller@fb000080 {
+      compatible = "loongson,htvec-1.0";
+      reg = <0xfb000080 0x40>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&liointc>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                    <25 IRQ_TYPE_LEVEL_HIGH>,
+                    <26 IRQ_TYPE_LEVEL_HIGH>,
+                    <27 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
new file mode 100644
index 0000000000..00b570c829
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Local I/O Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips and
+  Loongson-2K1000 chip, as the primary package interrupt controller which
+  can route local I/O interrupt to interrupt lines of cores.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,liointc-1.0
+      - loongson,liointc-1.0a
+      - loongson,liointc-2.0
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: main
+      - const: isr0
+      - const: isr1
+
+  interrupt-controller: true
+
+  interrupts:
+    description:
+      Interrupt source of the CPU interrupts.
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    description: List of names for the parent interrupts.
+    items:
+      - const: int0
+      - const: int1
+      - const: int2
+      - const: int3
+    minItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  loongson,parent_int_map:
+    description: |
+      This property points how the children interrupts will be mapped into CPU
+      interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
+      and each bit in the cell refers to a child interrupt from 0 to 31.
+      If a CPU interrupt line didn't connect with liointc, then keep its
+      cell with zero.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - loongson,parent_int_map
+
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - loongson,liointc-2.0
+
+then:
+  properties:
+    reg:
+      minItems: 3
+
+  required:
+    - reg-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+examples:
+  - |
+    iointc: interrupt-controller@3ff01400 {
+      compatible = "loongson,liointc-1.0";
+      reg = <0x3ff01400 0x64>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>;
+      interrupt-names = "int0", "int1";
+
+      loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+                                <0x0f000000>, /* int1 */
+                                <0x00000000>, /* int2 */
+                                <0x00000000>; /* int3 */
+
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
new file mode 100644
index 0000000000..c60125fb1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Interrupt Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 interrupt controller is connected to the MIPS core interrupt
+  controller, which controls several groups of interrupts.
+
+properties:
+  compatible:
+    const: loongson,ls1x-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    intc0: interrupt-controller@1fd01040 {
+        compatible = "loongson,ls1x-intc";
+        reg = <0x1fd01040 0x18>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
new file mode 100644
index 0000000000..a71fc2218e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCH MSI Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+  This interrupt controller is found in the Loongson LS7A family of PCH for
+  transforming interrupts from PCIe MSI into HyperTransport vectorized
+  interrupts.
+
+properties:
+  compatible:
+    const: loongson,pch-msi-1.0
+
+  reg:
+    maxItems: 1
+
+  loongson,msi-base-vec:
+    description:
+      u32 value of the base of parent HyperTransport vector allocated
+      to PCH MSI.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+  loongson,msi-num-vecs:
+    description:
+      u32 value of the number of parent HyperTransport vectors allocated
+      to PCH MSI.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 256
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - loongson,msi-base-vec
+  - loongson,msi-num-vecs
+
+additionalProperties: true # fixme
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    msi: msi-controller@2ff00000 {
+      compatible = "loongson,pch-msi-1.0";
+      reg = <0x2ff00000 0x4>;
+      msi-controller;
+      loongson,msi-base-vec = <64>;
+      loongson,msi-num-vecs = <64>;
+      interrupt-parent = <&htvec>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
new file mode 100644
index 0000000000..b7bc5cb1df
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCH PIC Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description:
+  This interrupt controller is found in the Loongson LS7A family of PCH for
+  transforming interrupts from on-chip devices into HyperTransport vectorized
+  interrupts.
+
+properties:
+  compatible:
+    const: loongson,pch-pic-1.0
+
+  reg:
+    maxItems: 1
+
+  loongson,pic-base-vec:
+    description:
+      u32 value of the base of parent HyperTransport vector allocated
+      to PCH PIC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 192
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - loongson,pic-base-vec
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pic: interrupt-controller@10000000 {
+      compatible = "loongson,pch-pic-1.0";
+      reg = <0x10000000 0x400>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      loongson,pic-base-vec = <64>;
+      interrupt-parent = <&htvec>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
new file mode 100644
index 0000000000..aee38e7c13
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+	region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+	compatible = "lsi,zevio-intc";
+	interrupt-controller;
+	reg = <0xDC000000 0x1000>;
+	#interrupt-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
new file mode 100644
index 0000000000..5fc03134a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
@@ -0,0 +1,38 @@
+Marvell Armada 370, 375, 38x, XP Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,mpic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- msi-controller: Identifies the node as an PCI Message Signaled
+  Interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
+  The cell is the IRQ number
+
+- reg: Should contain PMIC registers location and length. First pair
+  for the main interrupt registers, second pair for the per-CPU
+  interrupt registers. For this last pair, to be compliant with SMP
+  support, the "virtual" must be use (For the record, these registers
+  automatically map to the interrupt controller registers of the
+  current CPU)
+
+Optional properties:
+
+- interrupts: If defined, then it indicates that this MPIC is
+  connected as a slave to another interrupt controller. This is
+  typically the case on Armada 375 and Armada 38x, where the MPIC is
+  connected as a slave to the Cortex-A9 GIC. The provided interrupt
+  indicate to which GIC interrupt the MPIC output is connected.
+
+Example:
+
+        mpic: interrupt-controller@d0020000 {
+              compatible = "marvell,mpic";
+              #interrupt-cells = <1>;
+              #address-cells = <1>;
+              #size-cells = <1>;
+              interrupt-controller;
+              msi-controller;
+              reg = <0xd0020a00 0x1d0>,
+                    <0xd0021070 0x58>;
+        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
new file mode 100644
index 0000000000..86a7b4cd03
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
@@ -0,0 +1,25 @@
+Marvell Armada 7K/8K PIC Interrupt controller
+---------------------------------------------
+
+This is the Device Tree binding for the PIC, a secondary interrupt
+controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
+typically connected to the GIC as the primary interrupt controller.
+
+Required properties:
+- compatible: should be "marvell,armada-8k-pic"
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: the number of cells to define interrupts on this
+  controller. Should be 1
+- reg: the register area for the PIC interrupt controller
+- interrupts: the interrupt to the primary interrupt controller,
+  typically the GIC
+
+Example:
+
+	pic: interrupt-controller@3f0100 {
+		compatible = "marvell,armada-8k-pic";
+		reg = <0x3f0100 0x10>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
new file mode 100644
index 0000000000..64a00ceb7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
@@ -0,0 +1,27 @@
+Marvell GICP Controller
+-----------------------
+
+GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
+interrupts by doing a memory transaction. It is used by the ICU
+located in the Marvell CP110 to turn wired interrupts inside the CP
+into GIC SPI interrupts.
+
+Required properties:
+
+- compatible: Must be "marvell,ap806-gicp"
+
+- reg: Must be the address and size of the GICP SPI registers
+
+- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available
+  for this GICP
+
+- msi-controller: indicates that this is an MSI controller
+
+Example:
+
+gicp_spi: gicp-spi@3f0040 {
+	compatible = "marvell,ap806-gicp";
+	reg = <0x3f0040 0x10>;
+	marvell,spi-ranges = <64 64>, <288 64>;
+	msi-controller;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
new file mode 100644
index 0000000000..1c94a57a66
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
@@ -0,0 +1,112 @@
+Marvell ICU Interrupt Controller
+--------------------------------
+
+The Marvell ICU (Interrupt Consolidation Unit) controller is
+responsible for collecting all wired-interrupt sources in the CP and
+communicating them to the GIC in the AP, the unit translates interrupt
+requests on input wires to MSG memory mapped transactions to the GIC.
+These messages will access a different GIC memory area depending on
+their type (NSR, SR, SEI, REI, etc).
+
+Required properties:
+
+- compatible: Should be "marvell,cp110-icu"
+
+- reg: Should contain ICU registers location and length.
+
+Subnodes: Each group of interrupt is declared as a subnode of the ICU,
+with their own compatible.
+
+Required properties for the icu_nsr/icu_sei subnodes:
+
+- compatible: Should be one of:
+              * "marvell,cp110-icu-nsr"
+	      * "marvell,cp110-icu-sr"
+	      * "marvell,cp110-icu-sei"
+	      * "marvell,cp110-icu-rei"
+
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 2.
+
+  The 1st cell is the index of the interrupt in the ICU unit.
+
+  The 2nd cell is the type of the interrupt. See arm,gic.txt for
+  details.
+
+- interrupt-controller: Identifies the node as an interrupt
+  controller.
+
+- msi-parent: Should point to the GICP controller, the GIC extension
+  that allows to trigger interrupts using MSG memory mapped
+  transactions.
+
+Note: each 'interrupts' property referring to any 'icu_xxx' node shall
+      have a different number within [0:206].
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+	compatible = "marvell,cp110-icu";
+	reg = <0x1e0000 0x440>;
+
+	CP110_LABEL(icu_nsr): interrupt-controller@10 {
+		compatible = "marvell,cp110-icu-nsr";
+		reg = <0x10 0x20>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		msi-parent = <&gicp>;
+	};
+
+	CP110_LABEL(icu_sei): interrupt-controller@50 {
+		compatible = "marvell,cp110-icu-sei";
+		reg = <0x50 0x10>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		msi-parent = <&sei>;
+	};
+};
+
+node1 {
+	interrupt-parent = <&icu_nsr>;
+	interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+node2 {
+	interrupt-parent = <&icu_sei>;
+	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Would not work with the above nodes */
+node3 {
+	interrupt-parent = <&icu_nsr>;
+	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+The legacy bindings were different in this way:
+
+- #interrupt-cells: The value was 3.
+	The 1st cell was the group type of the ICU interrupt. Possible
+	group types were:
+	ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
+	ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
+	ICU_GRP_SEI (0x4) : System error interrupt
+	ICU_GRP_REI (0x5) : RAM error interrupt
+	The 2nd cell was the index of the interrupt in the ICU unit.
+	The 3rd cell was the type of the interrupt. See arm,gic.txt for
+	details.
+
+Example:
+
+icu: interrupt-controller@1e0000 {
+	compatible = "marvell,cp110-icu";
+	reg = <0x1e0000 0x440>;
+
+	#interrupt-cells = <3>;
+	interrupt-controller;
+	msi-parent = <&gicp>;
+};
+
+node1 {
+	interrupt-parent = <&icu>;
+	interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
new file mode 100644
index 0000000000..0ebfc952cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
@@ -0,0 +1,42 @@
+
+* Marvell ODMI for MSI support
+
+Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
+which can be used by on-board peripheral for MSI interrupts.
+
+Required properties:
+
+- compatible           : The value here should contain:
+
+    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
+
+- interrupt,controller : Identifies the node as an interrupt controller.
+
+- msi-controller       : Identifies the node as an MSI controller.
+
+- marvell,odmi-frames  : Number of ODMI frames available. Each frame
+                         provides a number of events.
+
+- reg                  : List of register definitions, one for each
+                         ODMI frame.
+
+- marvell,spi-base     : List of GIC base SPI interrupts, one for each
+                         ODMI frame. Those SPI interrupts are 0-based,
+                         i.e marvell,spi-base = <128> will use SPI #96.
+                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+                         for details about the GIC Device Tree binding.
+
+Example:
+
+	odmi: odmi@300000 {
+		compatible = "marvell,ap806-odmi-controller",
+			     "marvell,odmi-controller";
+		interrupt-controller;
+		msi-controller;
+		marvell,odmi-frames = <4>;
+		reg = <0x300000 0x4000>,
+		      <0x304000 0x4000>,
+		      <0x308000 0x4000>,
+		      <0x30C000 0x4000>;
+		marvell,spi-base = <128>, <136>, <144>, <152>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
new file mode 100644
index 0000000000..2c11ac76fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
@@ -0,0 +1,48 @@
+Marvell Orion SoC interrupt controllers
+
+* Main interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-intc"
+- reg: base address(es) of interrupt registers starting with CAUSE register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of first base address,
+- 1 maps to bit 1 of first base address,
+- 32 maps to bit 0 of second base address, and so on.
+
+Example:
+	intc: interrupt-controller {
+		compatible = "marvell,orion-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		 /* Dove has 64 first level interrupts */
+		reg = <0x20200 0x10>, <0x20210 0x10>;
+	};
+
+* Bridge interrupt controller
+
+Required properties:
+- compatible: shall be "marvell,orion-bridge-intc"
+- reg: base address of bridge interrupt registers starting with CAUSE register
+- interrupts: bridge interrupt of the main interrupt controller
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
+
+Optional properties:
+- marvell,#interrupts: number of interrupts provided by bridge interrupt
+      controller, defaults to 32 if not set
+
+Example:
+	bridge_intc: interrupt-controller {
+		compatible = "marvell,orion-bridge-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x20110 0x8>;
+		interrupts = <0>;
+		/* Dove bridge provides 5 interrupts */
+		marvell,#interrupts = <5>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
new file mode 100644
index 0000000000..0beafed502
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
@@ -0,0 +1,36 @@
+Marvell SEI (System Error Interrupt) Controller
+-----------------------------------------------
+
+Marvell SEI (System Error Interrupt) controller is an interrupt
+aggregator. It receives interrupts from several sources and aggregates
+them to a single interrupt line (an SPI) on the parent interrupt
+controller.
+
+This interrupt controller can handle up to 64 SEIs, a set comes from the
+AP and is wired while a second set comes from the CPs by the mean of
+MSIs.
+
+Required properties:
+
+- compatible: should be one of:
+              * "marvell,ap806-sei"
+- reg: SEI registers location and length.
+- interrupts: identifies the parent IRQ that will be triggered.
+- #interrupt-cells: number of cells to define an SEI wired interrupt
+                    coming from the AP, should be 1. The cell is the IRQ
+                    number.
+- interrupt-controller: identifies the node as an interrupt controller
+                        for AP interrupts.
+- msi-controller: identifies the node as an MSI controller for the CPs
+                  interrupts.
+
+Example:
+
+        sei: interrupt-controller@3f0200 {
+                compatible = "marvell,ap806-sei";
+                reg = <0x3f0200 0x40>;
+                interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
+                msi-controller;
+        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
new file mode 100644
index 0000000000..fdcb4d8db8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Interrupt Controller
+
+maintainers:
+  - Youlin Pei <youlin.pei@mediatek.com>
+
+description:
+  In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
+  work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
+  The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+  to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+  interrupts and generate a pulse signal to parent interrupt controller when
+  flush command is executed. With CIRQ, MCUSYS can be completely turned off
+  to improve the system power consumption without losing interrupts.
+
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-cirq
+          - mediatek,mt8135-cirq
+          - mediatek,mt8173-cirq
+          - mediatek,mt8192-cirq
+      - const: mediatek,mtk-cirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  mediatek,ext-irq-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: First CIRQ interrupt
+      - description: Last CIRQ interrupt
+    description:
+      Identifies the range of external interrupts in different SoCs
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - mediatek,ext-irq-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cirq: interrupt-controller@10204000 {
+        compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq";
+        reg = <0x10204000 0x400>;
+        #interrupt-cells = <3>;
+        interrupt-controller;
+        interrupt-parent = <&sysirq>;
+        mediatek,ext-irq-range = <32 200>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
new file mode 100644
index 0000000000..3ffc60184e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -0,0 +1,44 @@
+MediaTek sysirq
+
+MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
+interrupt.
+
+Required properties:
+- compatible: should be
+	"mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
+	"mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
+	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
+	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
+	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
+	"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
+	"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
+	"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
+	"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
+	"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
+	"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
+	"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
+	"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
+	"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
+	"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
+	"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
+	"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
+	"mediatek,mt6577-sysirq": for MT6577
+	"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
+	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
+	"mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
+- reg: Physical base address of the intpol registers and length of memory
+  mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
+  need 1.
+
+Example:
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6797-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10220620 0 0x20>,
+		      <0 0x10220690 0 0x10>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
new file mode 100644
index 0000000000..c3a1b37c4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
@@ -0,0 +1,67 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+It handles all internal and external interrupts. This controller exists outside
+of the CPU and is the arbitrator of all interrupts (including interrupts from
+the CPU itself) before they are presented to the CPU.
+
+External interrupts have a software configurable edge polarity. Non external
+interrupts have a type and polarity that is determined by the source of the
+interrupt.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+- reg: Specifies physical base address and size of register range.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+  source connected to this controller. The value shall be 2 and interrupt
+  descriptor shall have the following format:
+
+	<hw_irq irq_type>
+
+  hw_irq - represents the hardware interrupt number as in the data sheet.
+  irq_type - is used to describe the type and polarity of an interrupt. For
+  internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+  IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+  IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Optional properties
+-------------------
+- microchip,external-irqs: u32 array of external interrupts with software
+  polarity configuration. This array corresponds to the bits in the INTCON
+  SFR.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+	compatible = "microchip,pic32mzda-evic";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x1f810000 0x1000>;
+	microchip,external-irqs = <3 8 13 18 23>;
+};
+
+Each device/peripheral must request its interrupt line with the associated type
+and polarity.
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+	...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	...
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
new file mode 100644
index 0000000000..d56ba65b17
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip External Interrupt Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
+  support for handling up to 2 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - microchip,sama7g5-eic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number (between 0 and 1), the second cell
+      is the trigger type as defined in interrupt.txt present in this directory.
+
+  interrupts:
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
+      should be specified sequentially from output 0 to output 1.
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    eic: interrupt-controller@e1628000 {
+      compatible = "microchip,sama7g5-eic";
+      reg = <0xe1628000 0x100>;
+      interrupt-parent = <&gic>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+      clock-names = "pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
new file mode 100644
index 0000000000..b7c5022eec
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP/Orion Interrupt controller
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: marvell,orion-intc
+    then:
+      required:
+        - mrvl,intc-nr-irqs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mrvl,mmp-intc
+              - mrvl,mmp2-intc
+    then:
+      properties:
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,mmp3-intc
+              - mrvl,mmp2-mux-intc
+    then:
+      properties:
+        reg:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mrvl,mmp2-mux-intc
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: mux status
+            - const: mux mask
+      required:
+        - interrupts
+    else:
+      properties:
+        interrupts: false
+
+properties:
+  '#interrupt-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - mrvl,mmp-intc
+      - mrvl,mmp2-intc
+      - marvell,mmp3-intc
+      - marvell,orion-intc
+      - mrvl,mmp2-mux-intc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names: true
+
+  interrupts: true
+
+  interrupt-controller: true
+
+  mrvl,intc-nr-irqs:
+    description: |
+      Specifies the number of interrupts in the interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  mrvl,clr-mfp-irq:
+    description: |
+      Specifies the interrupt that needs to clear MFP edge detection first.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - '#interrupt-cells'
+  - compatible
+  - reg
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@d4282000 {
+        compatible = "mrvl,mmp2-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0xd4282000 0x1000>;
+        mrvl,intc-nr-irqs = <64>;
+    };
+
+    interrupt-controller@d4282150 {
+        compatible = "mrvl,mmp2-mux-intc";
+        interrupts = <4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0x150 0x4>, <0x168 0x4>;
+        reg-names = "mux status", "mux mask";
+        mrvl,intc-nr-irqs = <2>;
+    };
+  - |
+    interrupt-controller@fed20204 {
+        compatible = "marvell,orion-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0xfed20204 0x04>,
+              <0xfed20214 0x04>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
new file mode 100644
index 0000000000..4ff609faba
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot SoC ICPU Interrupt Controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  the Microsemi Ocelot interrupt controller that is part of the
+  ICPU. It is connected directly to the MIPS core interrupt
+  controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mscc,jaguar2-icpu-intr
+          - mscc,luton-icpu-intr
+          - mscc,ocelot-icpu-intr
+          - mscc,serval-icpu-intr
+
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@70000070 {
+        compatible = "mscc,ocelot-icpu-intr";
+        reg = <0x70000070 0x70>;
+        #interrupt-cells = <1>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupt-parent = <&cpuintc>;
+        interrupts = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml
new file mode 100644
index 0000000000..449d6067ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSI controller
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  An MSI controller signals interrupts to a CPU when a write is made
+  to an MMIO address by some master. An MSI controller may feature a
+  number of doorbells.
+
+properties:
+  "#msi-cells":
+    description: |
+      The number of cells in an msi-specifier, required if not zero.
+
+      Typically this will encode information related to sideband data,
+      and will not encode doorbells or payloads as these can be
+      configured dynamically.
+
+      The meaning of the msi-specifier is defined by the device tree
+      binding of the specific MSI controller.
+    enum: [0, 1]
+
+  msi-controller:
+    description:
+      Identifies the node as an MSI controller.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  msi-ranges:
+    description:
+      A list of <phandle intspec span> tuples, where "phandle" is the
+      parent interrupt controller, "intspec" is the starting/base
+      interrupt specifier and "span" is the size of the
+      range. Multiple ranges can be provided.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+dependencies:
+  "#msi-cells": [ msi-controller ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
new file mode 100644
index 0000000000..c20b51df71
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi.txt
@@ -0,0 +1,135 @@
+This document describes the generic device tree binding for MSI controllers and
+their master(s).
+
+Message Signaled Interrupts (MSIs) are a class of interrupts generated by a
+write to an MMIO address.
+
+MSIs were originally specified by PCI (and are used with PCIe), but may also be
+used with other busses, and hence a mechanism is required to relate devices on
+those busses to the MSI controllers which they are capable of using,
+potentially including additional information.
+
+MSIs are distinguished by some combination of:
+
+- The doorbell (the MMIO address written to).
+  
+  Devices may be configured by software to write to arbitrary doorbells which
+  they can address. An MSI controller may feature a number of doorbells.
+
+- The payload (the value written to the doorbell).
+  
+  Devices may be configured to write an arbitrary payload chosen by software.
+  MSI controllers may have restrictions on permitted payloads.
+
+- Sideband information accompanying the write.
+  
+  Typically this is neither configurable nor probeable, and depends on the path
+  taken through the memory system (i.e. it is a property of the combination of
+  MSI controller and device rather than a property of either in isolation).
+
+
+MSI controllers:
+================
+
+An MSI controller signals interrupts to a CPU when a write is made to an MMIO
+address by some master. An MSI controller may feature a number of doorbells.
+
+Required properties:
+--------------------
+
+- msi-controller: Identifies the node as an MSI controller.
+
+Optional properties:
+--------------------
+
+- #msi-cells: The number of cells in an msi-specifier, required if not zero.
+
+  Typically this will encode information related to sideband data, and will
+  not encode doorbells or payloads as these can be configured dynamically.
+
+  The meaning of the msi-specifier is defined by the device tree binding of
+  the specific MSI controller. 
+
+
+MSI clients
+===========
+
+MSI clients are devices which generate MSIs. For each MSI they wish to
+generate, the doorbell and payload may be configured, though sideband
+information may not be configurable.
+
+Required properties:
+--------------------
+
+- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI
+  controller which the device is capable of using.
+
+  This property is unordered, and MSIs may be allocated from any combination of
+  MSI controllers listed in the msi-parent property.
+
+  If a device has restrictions on the allocation of MSIs, these restrictions
+  must be described with additional properties.
+
+  When #msi-cells is non-zero, busses with an msi-parent will require
+  additional properties to describe the relationship between devices on the bus
+  and the set of MSIs they can potentially generate.
+
+
+Example
+=======
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi_a: msi-controller@a {
+		reg = <0xa 0xf00>;
+		compatible = "vendor-a,some-controller";
+		msi-controller;
+		/* No sideband data, so #msi-cells omitted */
+	};
+
+	msi_b: msi-controller@b {
+		reg = <0xb 0xf00>;
+		compatible = "vendor-b,another-controller";
+		msi-controller;
+		/* Each device has some unique ID */
+		#msi-cells = <1>;
+	};
+
+	msi_c: msi-controller@c {
+		reg = <0xc 0xf00>;
+		compatible = "vendor-b,another-controller";
+		msi-controller;
+		/* Each device has some unique ID */
+		#msi-cells = <1>;
+	};
+
+	dev@0 {
+		reg = <0x0 0xf00>;
+		compatible = "vendor-c,some-device";
+
+		/* Can only generate MSIs to msi_a */
+		msi-parent = <&msi_a>;
+	};
+
+	dev@1 {
+		reg = <0x1 0xf00>;
+		compatible = "vendor-c,some-device";
+
+		/* 
+		 * Can generate MSIs to either A or B.
+		 */
+		msi-parent = <&msi_a>, <&msi_b 0x17>;
+	};
+
+	dev@2 {
+		reg = <0x2 0xf00>;
+		compatible = "vendor-c,some-device";
+		/*
+		 * Has different IDs at each MSI controller.
+		 * Can generate MSIs to all of the MSI controllers.
+		 */
+		msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
new file mode 100644
index 0000000000..bbf0f26cd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mstar,mst-intc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mstar,mst-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Interrupt Controller
+
+maintainers:
+  - Mark-PK Tsai <mark-pk.tsai@mediatek.com>
+
+description: |+
+  MStar, SigmaStar and Mediatek TV SoCs contain multiple legacy
+  interrupt controllers that routes interrupts to the GIC.
+
+  The HW block exposes a number of interrupt controllers, each
+  can support up to 64 interrupts.
+
+properties:
+  compatible:
+    const: mstar,mst-intc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      Use the same format as specified by GIC in arm,gic.yaml.
+
+  reg:
+    maxItems: 1
+
+  mstar,irqs-map-range:
+    description: |
+      The range <start, end> of parent interrupt controller's interrupt
+      lines that are hardwired to mstar interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  mstar,intc-no-eoi:
+    description:
+      Mark this controller has no End Of Interrupt(EOI) implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - mstar,irqs-map-range
+
+additionalProperties: false
+
+examples:
+  - |
+    mst_intc0: interrupt-controller@1f2032d0 {
+      compatible = "mstar,mst-intc";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      interrupt-parent = <&gic>;
+      reg = <0x1f2032d0 0x30>;
+      mstar,irqs-map-range = <0 63>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
new file mode 100644
index 0000000000..46a1f5f54b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPU Interrupt Controller
+
+description: >
+   On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
+   IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+   With the irq_domain in place we can describe how the 8 IRQs are wired to the
+   platforms internal interrupt controller cascade.
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: mti,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "mti,cpu-interrupt-controller";
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
new file mode 100644
index 0000000000..91bb3c2307
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Global Interrupt Controller
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+description: |
+  The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+  It also supports local (per-processor) interrupts and software-generated
+  interrupts which can be used as IPIs. The GIC also includes a free-running
+  global timer, per-CPU count/compare timers, and a watchdog.
+
+properties:
+  compatible:
+    const: mti,gic
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the type of interrupt: local or shared defined in the
+      file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
+      GIC interrupt number. The 3d cell encodes the interrupt flags setting up
+      the IRQ trigger modes, which are defined in the file
+      'dt-bindings/interrupt-controller/irq.h'.
+
+  reg:
+    description: |
+      Base address and length of the GIC registers space. If not present,
+      the base address reported by the hardware GCR_GIC_BASE will be used.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  mti,reserved-cpu-vectors:
+    description: |
+      Specifies the list of CPU interrupt vectors to which the GIC may not
+      route interrupts. This property is ignored if the CPU is started in EIC
+      mode.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    uniqueItems: true
+    items:
+      minimum: 2
+      maximum: 7
+
+  mti,reserved-ipi-vectors:
+    description: |
+      Specifies the range of GIC interrupts that are reserved for IPIs.
+      It accepts two values: the 1st is the starting interrupt and the 2nd is
+      the size of the reserved range. If not specified, the driver will
+      allocate the last (2 * number of VPEs in the system).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - minimum: 0
+        maximum: 254
+      - minimum: 2
+        maximum: 254
+
+  timer:
+    type: object
+    description: |
+      MIPS GIC includes a free-running global timer, per-CPU count/compare
+      timers, and a watchdog. Currently only the GIC Timer is supported.
+    properties:
+      compatible:
+        const: mti,gic-timer
+
+      interrupts:
+        description: |
+          Interrupt for the GIC local timer, so normally it's suppose to be of
+          <GIC_LOCAL X IRQ_TYPE_NONE> format.
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-frequency: true
+
+    required:
+      - compatible
+      - interrupts
+
+    oneOf:
+      - required:
+          - clocks
+      - required:
+          - clock-frequency
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      mti,reserved-cpu-vectors = <7>;
+      mti,reserved-ipi-vectors = <40 8>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clock-frequency = <50000000>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@1bdc0000 {
+      compatible = "mti,gic";
+      reg = <0x1bdc0000 0x20000>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+
+      timer {
+        compatible = "mti,gic-timer";
+        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+        clocks = <&cpu_pll>;
+      };
+    };
+  - |
+    interrupt-controller {
+      compatible = "mti,gic";
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
new file mode 100644
index 0000000000..2d6307a383
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 Advanced Interrupt Controller
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+  '#interrupt-cells':
+    const: 2
+
+  compatible:
+    const: nuvoton,wpcm450-aic
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - '#interrupt-cells'
+  - compatible
+  - reg
+  - interrupt-controller
+
+examples:
+  - |
+    aic: interrupt-controller@b8002000 {
+        compatible = "nuvoton,wpcm450-aic";
+        reg = <0xb8002000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
new file mode 100644
index 0000000000..2ff3566401
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
@@ -0,0 +1,41 @@
+NVIDIA Legacy Interrupt Controller
+
+All Tegra SoCs contain a legacy interrupt controller that routes
+interrupts to the GIC, and also serves as a wakeup source. It is also
+referred to as "ictlr", hence the name of the binding.
+
+The HW block exposes a number of interrupt controllers, each
+implementing a set of 32 interrupts.
+
+Required properties:
+
+- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
+  subsequent SoCs remained backwards-compatible with Tegra30, so on
+  Tegra generations later than Tegra30 the compatible value should
+  include "nvidia,tegra30-ictlr".	
+- reg : Specifies base physical address and size of the registers.
+  Each controller must be described separately (Tegra20 has 4 of them,
+  whereas Tegra30 and later have 5).
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 3.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+  interrupt specifier must be that of the GIC.
+- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
+  are explicitly forbidden.
+
+Example:
+
+	ictlr: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr";
+		reg = <0x60004000 64>,
+		      <0x60004100 64>,
+		      <0x60004200 64>,
+		      <0x60004300 64>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
new file mode 100644
index 0000000000..0bfb3ba55f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
@@ -0,0 +1,58 @@
+* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
+
+Required properties:
+- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic".
+- reg: should contain IC registers location and length.
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: the number of cells to define an interrupt, should be 2.
+  The first cell is the IRQ number, the second cell is used to specify
+  one of the supported IRQ types:
+      IRQ_TYPE_EDGE_RISING = low-to-high edge triggered,
+      IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered,
+      IRQ_TYPE_LEVEL_HIGH = active high level-sensitive,
+      IRQ_TYPE_LEVEL_LOW = active low level-sensitive.
+  Reset value is IRQ_TYPE_LEVEL_LOW.
+
+Optional properties:
+- interrupts: empty for MIC interrupt controller, cascaded MIC
+  hardware interrupts for SIC1 and SIC2
+
+Examples:
+
+	/* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */
+	mic: interrupt-controller@40008000 {
+		compatible = "nxp,lpc3220-mic";
+		reg = <0x40008000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sic1: interrupt-controller@4000c000 {
+		compatible = "nxp,lpc3220-sic";
+		reg = <0x4000c000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&mic>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+			     <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	sic2: interrupt-controller@40010000 {
+		compatible = "nxp,lpc3220-sic";
+		reg = <0x40010000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&mic>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* ADC */
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&sic1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
new file mode 100644
index 0000000000..ccbbfdc53c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
@@ -0,0 +1,97 @@
+* Open PIC Binding
+
+This binding specifies what properties must be available in the device tree
+representation of an Open PIC compliant interrupt controller.  This binding is
+based on the binding defined for Open PIC in [1] and is a superset of that
+binding.
+
+Required properties:
+
+  NOTE: Many of these descriptions were paraphrased here from [1] to aid
+        readability.
+
+    - compatible: Specifies the compatibility list for the PIC.  The type
+      shall be <string> and the value shall include "open-pic".
+
+    - reg: Specifies the base physical address(s) and size(s) of this
+      PIC's addressable register space.  The type shall be <prop-encoded-array>.
+
+    - interrupt-controller: The presence of this property identifies the node
+      as an Open PIC.  No property value shall be defined.
+
+    - #interrupt-cells: Specifies the number of cells needed to encode an
+      interrupt source.  The type shall be a <u32> and the value shall be 2.
+
+    - #address-cells: Specifies the number of cells needed to encode an
+      address.  The type shall be <u32> and the value shall be 0.  As such,
+      'interrupt-map' nodes do not have to specify a parent unit address.
+
+Optional properties:
+
+    - pic-no-reset: The presence of this property indicates that the PIC
+      shall not be reset during runtime initialization.  No property value shall
+      be defined.  The presence of this property also mandates that any
+      initialization related to interrupt sources shall be limited to sources
+      explicitly referenced in the device tree.
+
+* Interrupt Specifier Definition
+
+  Interrupt specifiers consists of 2 cells encoded as
+  follows:
+
+    - <1st-cell>: The interrupt-number that identifies the interrupt source.
+
+    - <2nd-cell>: The level-sense information, encoded as follows:
+                    0 = low-to-high edge triggered
+                    1 = active low level-sensitive
+                    2 = active high level-sensitive
+                    3 = high-to-low edge triggered
+
+* Examples
+
+Example 1:
+
+	/*
+	 * An Open PIC interrupt controller
+	 */
+	mpic: pic@40000 {
+		// This is an interrupt controller node.
+		interrupt-controller;
+
+		// No address cells so that 'interrupt-map' nodes which reference
+		// this Open PIC node do not need a parent address specifier.
+		#address-cells = <0>;
+
+		// Two cells to encode interrupt sources.
+		#interrupt-cells = <2>;
+
+		// Offset address of 0x40000 and size of 0x40000.
+		reg = <0x40000 0x40000>;
+
+		// Compatible with Open PIC.
+		compatible = "open-pic";
+
+		// The PIC shall not be reset.
+		pic-no-reset;
+	};
+
+Example 2:
+
+	/*
+	 * An interrupt generating device that is wired to an Open PIC.
+	 */
+	serial0: serial@4500 {
+		// Interrupt source '42' that is active high level-sensitive.
+		// Note that there are only two cells as specified in the interrupt
+		// parent's '#interrupt-cells' property.
+		interrupts = <42 2>;
+
+		// The interrupt controller that this device is wired to.
+		interrupt-parent = <&mpic>;
+	};
+
+* References
+
+[1] Devicetree Specification
+    (https://www.devicetree.org/specifications/)
+
diff --git a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
new file mode 100644
index 0000000000..55c04faa3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
@@ -0,0 +1,23 @@
+OpenRISC 1000 Programmable Interrupt Controller
+
+Required properties:
+
+- compatible : should be "opencores,or1k-pic-level" for variants with
+  level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
+  edge triggered interrupt lines or "opencores,or1200-pic" for machines
+  with the non-spec compliant or1200 type implementation.
+
+  "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
+  but this is only for backwards compatibility.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "opencores,or1k-pic-level";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
new file mode 100644
index 0000000000..caec07cc71
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
@@ -0,0 +1,22 @@
+Open Multi-Processor Interrupt Controller
+
+Required properties:
+
+- compatible : This should be "openrisc,ompic"
+- reg : Specifies base physical address and size of the register space. The
+  size is based on the number of cores the controller has been configured
+  to handle, this should be set to 8 bytes per cpu core.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : This should be set to 0 as this will not be an irq
+  parent.
+- interrupts : Specifies the interrupt line to which the ompic is wired.
+
+Example:
+
+ompic: interrupt-controller@98000000 {
+	compatible = "openrisc,ompic";
+	reg = <0x98000000 16>;
+	interrupt-controller;
+	#interrupt-cells = <0>;
+	interrupts = <1>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
new file mode 100644
index 0000000000..aabce7810d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
@@ -0,0 +1,44 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller
+
+On most SoC the IRQ controller need to flush the DDR FIFO before running
+the interrupt handler of some devices. This is configured using the
+qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
+
+Required Properties:
+
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
+  as fallback
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+		     source, should be 1 for intc
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Optional Properties:
+
+- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
+  buffer flush
+- qca,ddr-wb-channels: List of phandles to the write buffer channels for
+  each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
+  default to the entry's index.
+
+Example:
+
+	interrupt-controller {
+		compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+					<&ddr_ctrl 0>, <&ddr_ctrl 1>;
+	};
+
+	...
+
+	ddr_ctrl: memory-controller@18000000 {
+		...
+		#qca,ddr-wb-channel-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
new file mode 100644
index 0000000000..ad70006c18
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -0,0 +1,45 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
+
+The MISC interrupt controller is a secondary controller for lower priority
+interrupt.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
+  "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
+- reg: Base address and size of the controllers memory area
+- interrupts: Interrupt specifier for the controllers interrupt.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+		     source, should be 1
+
+Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
+use ar7240 for all other SoCs.
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+
+	interrupt-controller@18060010 {
+		compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
+		reg = <0x18060010 0x4>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+Another example:
+
+	interrupt-controller@18060010 {
+		compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
+		reg = <0x18060010 0x4>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 0000000000..6a206111d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+  MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+  resources during sleep, the hardware also has an interrupt controller that
+  monitors the interrupts when the system is asleep, wakes up the APSS when
+  one of these interrupts occur and replays it to GIC interrupt controller
+  after GIC becomes operational.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,mpm
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specify the IRQ used by RPM to wakeup APSS.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Specify the mailbox used to notify RPM for writing vMPM registers.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the MPM pin number for the interrupt, and the second
+      is the trigger type.
+
+  qcom,mpm-pin-count:
+    description:
+      Specify the total MPM pin count that a SoC supports.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,mpm-pin-map:
+    description:
+      A set of MPM pin numbers and the corresponding GIC SPIs.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: MPM pin number
+        - description: GIC SPI number for the MPM pin
+
+  '#power-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - interrupt-controller
+  - '#interrupt-cells'
+  - qcom,mpm-pin-count
+  - qcom,mpm-pin-map
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mpm: interrupt-controller@45f01b8 {
+        compatible = "qcom,mpm";
+        interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+        reg = <0x45f01b8 0x1000>;
+        mboxes = <&apcs_glb 1>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        qcom,mpm-pin-count = <96>;
+        qcom,mpm-pin-map = <2 275>,
+                           <5 296>,
+                           <12 422>,
+                           <24 79>,
+                           <86 183>,
+                           <90 260>,
+                           <91 260>;
+        #power-domain-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
new file mode 100644
index 0000000000..4847b04be1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDC interrupt controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
+  Power Domain Controller (PDC) that is on always-on domain. In addition to
+  providing power control for the power domains, the hardware also has an
+  interrupt controller that can be used to help detect edge low interrupts as
+  well detect interrupts when the GIC is non-operational.
+
+  GIC is parent interrupt controller at the highest level. Platform interrupt
+  controller PDC is next in hierarchy, followed by others. Drivers requiring
+  wakeup capabilities of their device interrupts routed through the PDC, must
+  specify PDC as their interrupt controller and request the PDC port associated
+  with the GIC interrupt. See example below.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qdu1000-pdc
+          - qcom,sa8775p-pdc
+          - qcom,sc7180-pdc
+          - qcom,sc7280-pdc
+          - qcom,sc8280xp-pdc
+          - qcom,sdm670-pdc
+          - qcom,sdm845-pdc
+          - qcom,sdx55-pdc
+          - qcom,sdx65-pdc
+          - qcom,sm6350-pdc
+          - qcom,sm8150-pdc
+          - qcom,sm8250-pdc
+          - qcom,sm8350-pdc
+          - qcom,sm8450-pdc
+      - const: qcom,pdc
+
+  reg:
+    minItems: 1
+    items:
+      - description: PDC base register region
+      - description: Edge or Level config register for SPI interrupts
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  qcom,pdc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 128 # no hard limit
+    items:
+      items:
+        - description: starting PDC port
+        - description: GIC hwirq number for the PDC port
+        - description: number of interrupts in sequence
+    description: |
+      Specifies the PDC pin offset and the number of PDC ports.
+      The tuples indicates the valid mapping of valid PDC ports
+      and their hwirq mapping.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - qcom,pdc-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pdc: interrupt-controller@b220000 {
+        compatible = "qcom,sdm845-pdc", "qcom,pdc";
+        reg = <0xb220000 0x30000>;
+        qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+    };
+
+    wake-device {
+        interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
new file mode 100644
index 0000000000..0fa952a9ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoCs Interrupt Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+  This interrupt controller support a central point for interrupt aggregation
+  for platform related blocks.
+
+properties:
+  compatible:
+    const: ralink,rt2880-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@200 {
+      compatible = "ralink,rt2880-intc";
+      reg = <0x200 0x100>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
new file mode 100644
index 0000000000..96d6285d00
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@0 {
+      compatible = "rda,8810pl-intc";
+      reg = <0x0 0x1000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
new file mode 100644
index 0000000000..fb55937240
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL SoC interrupt controller
+
+description:
+  Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+  interrupt to be routed to one parent CPU (hardware) interrupt, or left
+  disconnected.
+  All connected input lines from SoC peripherals can be masked individually,
+  and an interrupt status register is present to indicate which interrupts are
+  pending.
+
+maintainers:
+  - Birger Koblitz <mail@birger-koblitz.de>
+  - Bert Vermeulen <bert@biot.com>
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl8380-intc
+          - const: realtek,rtl-intc
+      - const: realtek,rtl-intc
+        deprecated: true
+
+  "#interrupt-cells":
+    description:
+      SoC interrupt line index.
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 15
+    description:
+      List of parent interrupts, in the order that they are connected to this
+      interrupt router's outputs, starting at the first output.
+
+  interrupt-controller: true
+
+  interrupt-map:
+    deprecated: true
+    description: Describes mapping from SoC interrupts to CPU interrupts
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: realtek,rtl-intc
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+      required:
+        - "#address-cells"
+        - interrupt-map
+    else:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@3000 {
+      compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
+      #interrupt-cells = <1>;
+      interrupt-controller;
+      reg = <0x3000 0x18>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>, <4>, <5>, <6>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml
new file mode 100644
index 0000000000..f4aae56c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,intc-irqpin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Interrupt Controller (INTC) for external pins
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,intc-irqpin-r8a7740  # R-Mobile A1
+          - renesas,intc-irqpin-r8a7778  # R-Car M1A
+          - renesas,intc-irqpin-r8a7779  # R-Car H1
+          - renesas,intc-irqpin-sh73a0   # SH-Mobile AG5
+      - const: renesas,intc-irqpin
+
+  reg:
+    minItems: 5
+    items:
+      - description: Interrupt control register
+      - description: Interrupt priority register
+      - description: Interrupt source register
+      - description: Interrupt mask register
+      - description: Interrupt mask clear register
+      - description: Interrupt control register for ICR0 with IRLM0 bit
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  sense-bitfield-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4]
+    default: 4
+    description:
+      Width of a single sense bitfield in the SENSE register, if different from the
+      default.
+
+  control-parent:
+    type: boolean
+    description:
+      Disable and enable interrupts on the parent interrupt controller, needed for some
+      broken implementations.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,intc-irqpin-r8a7740
+          - renesas,intc-irqpin-sh73a0
+then:
+  required:
+    - clocks
+    - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    irqpin1: interrupt-controller@e6900004 {
+        compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+        reg = <0xe6900004 4>,
+              <0xe6900014 4>,
+              <0xe6900024 1>,
+              <0xe6900044 1>,
+              <0xe6900064 1>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+        power-domains = <&pd_a4s>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
new file mode 100644
index 0000000000..b417341fc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: R-Mobile/R-Car/RZ/G interrupt controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,irqc-r8a73a4        # R-Mobile APE6
+          - renesas,irqc-r8a7742        # RZ/G1H
+          - renesas,irqc-r8a7743        # RZ/G1M
+          - renesas,irqc-r8a7744        # RZ/G1N
+          - renesas,irqc-r8a7745        # RZ/G1E
+          - renesas,irqc-r8a77470       # RZ/G1C
+          - renesas,irqc-r8a7790        # R-Car H2
+          - renesas,irqc-r8a7791        # R-Car M2-W
+          - renesas,irqc-r8a7792        # R-Car V2H
+          - renesas,irqc-r8a7793        # R-Car M2-N
+          - renesas,irqc-r8a7794        # R-Car E2
+          - renesas,intc-ex-r8a774a1    # RZ/G2M
+          - renesas,intc-ex-r8a774b1    # RZ/G2N
+          - renesas,intc-ex-r8a774c0    # RZ/G2E
+          - renesas,intc-ex-r8a774e1    # RZ/G2H
+          - renesas,intc-ex-r8a7795     # R-Car H3
+          - renesas,intc-ex-r8a7796     # R-Car M3-W
+          - renesas,intc-ex-r8a77961    # R-Car M3-W+
+          - renesas,intc-ex-r8a77965    # R-Car M3-N
+          - renesas,intc-ex-r8a77970    # R-Car V3M
+          - renesas,intc-ex-r8a77980    # R-Car V3H
+          - renesas,intc-ex-r8a77990    # R-Car E3
+          - renesas,intc-ex-r8a77995    # R-Car D3
+          - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779f0    # R-Car S4-8
+          - renesas,intc-ex-r8a779g0    # R-Car V4H
+      - const: renesas,irqc
+
+  '#interrupt-cells':
+    # an interrupt index and flags, as defined in interrupts.txt in
+    # this directory
+    const: 2
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    irqc0: interrupt-controller@e61c0000 {
+        compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        reg = <0xe61c0000 0x200>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 407>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml
new file mode 100644
index 0000000000..755cdfabfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rza1-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 Interrupt Controller
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas RZ/A1 and
+  RZ/A2 SoCs:
+    - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI interrupts,
+    - NMI edge select.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-irqc # RZ/A1H
+          - renesas,r7s9210-irqc  # RZ/A2M
+      - const: renesas,rza1-irqc
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupt-map:
+    maxItems: 8
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask:
+    items:
+      - const: 7
+      - const: 0
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    irqc: interrupt-controller@fcfef800 {
+            compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0xfcfef800 0x6>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                    <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                    <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <7 0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 0000000000..2ef3081eaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043u-irqc   # RZ/G2UL
+          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
+          - renesas,r9a07g054-irqc    # RZ/V2L
+      - const: renesas,rzg2l-irqc
+
+  '#interrupt-cells':
+    description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the
+                 include/dt-bindings/interrupt-controller/irqc-rzg2l.h and the second
+                 cell is used to specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 41
+    items:
+      - description: NMI interrupt
+      - description: IRQ0 interrupt
+      - description: IRQ1 interrupt
+      - description: IRQ2 interrupt
+      - description: IRQ3 interrupt
+      - description: IRQ4 interrupt
+      - description: IRQ5 interrupt
+      - description: IRQ6 interrupt
+      - description: IRQ7 interrupt
+      - description: GPIO interrupt, TINT0
+      - description: GPIO interrupt, TINT1
+      - description: GPIO interrupt, TINT2
+      - description: GPIO interrupt, TINT3
+      - description: GPIO interrupt, TINT4
+      - description: GPIO interrupt, TINT5
+      - description: GPIO interrupt, TINT6
+      - description: GPIO interrupt, TINT7
+      - description: GPIO interrupt, TINT8
+      - description: GPIO interrupt, TINT9
+      - description: GPIO interrupt, TINT10
+      - description: GPIO interrupt, TINT11
+      - description: GPIO interrupt, TINT12
+      - description: GPIO interrupt, TINT13
+      - description: GPIO interrupt, TINT14
+      - description: GPIO interrupt, TINT15
+      - description: GPIO interrupt, TINT16
+      - description: GPIO interrupt, TINT17
+      - description: GPIO interrupt, TINT18
+      - description: GPIO interrupt, TINT19
+      - description: GPIO interrupt, TINT20
+      - description: GPIO interrupt, TINT21
+      - description: GPIO interrupt, TINT22
+      - description: GPIO interrupt, TINT23
+      - description: GPIO interrupt, TINT24
+      - description: GPIO interrupt, TINT25
+      - description: GPIO interrupt, TINT26
+      - description: GPIO interrupt, TINT27
+      - description: GPIO interrupt, TINT28
+      - description: GPIO interrupt, TINT29
+      - description: GPIO interrupt, TINT30
+      - description: GPIO interrupt, TINT31
+      - description: Bus error interrupt
+
+  interrupt-names:
+    minItems: 41
+    items:
+      - const: nmi
+      - const: irq0
+      - const: irq1
+      - const: irq2
+      - const: irq3
+      - const: irq4
+      - const: irq5
+      - const: irq6
+      - const: irq7
+      - const: tint0
+      - const: tint1
+      - const: tint2
+      - const: tint3
+      - const: tint4
+      - const: tint5
+      - const: tint6
+      - const: tint7
+      - const: tint8
+      - const: tint9
+      - const: tint10
+      - const: tint11
+      - const: tint12
+      - const: tint13
+      - const: tint14
+      - const: tint15
+      - const: tint16
+      - const: tint17
+      - const: tint18
+      - const: tint19
+      - const: tint20
+      - const: tint21
+      - const: tint22
+      - const: tint23
+      - const: tint24
+      - const: tint25
+      - const: tint26
+      - const: tint27
+      - const: tint28
+      - const: tint29
+      - const: tint30
+      - const: tint31
+      - const: bus-err
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043u-irqc
+    then:
+      properties:
+        interrupts:
+          minItems: 42
+        interrupt-names:
+          minItems: 42
+      required:
+        - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+        compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+        reg = <0x110a0000 0x10000>;
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "nmi",
+                          "irq0", "irq1", "irq2", "irq3",
+                          "irq4", "irq5", "irq6", "irq7",
+                          "tint0", "tint1", "tint2", "tint3",
+                          "tint4", "tint5", "tint6", "tint7",
+                          "tint8", "tint9", "tint10", "tint11",
+                          "tint12", "tint13", "tint14", "tint15",
+                          "tint16", "tint17", "tint18", "tint19",
+                          "tint20", "tint21", "tint22", "tint23",
+                          "tint24", "tint25", "tint26", "tint27",
+                          "tint28", "tint29", "tint30", "tint31";
+        clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+        clock-names = "clk", "pclk";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_IA55_RESETN>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
new file mode 100644
index 0000000000..265b223cd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
@@ -0,0 +1,52 @@
+RISC-V Hart-Level Interrupt Controller (HLIC)
+---------------------------------------------
+
+RISC-V cores include Control Status Registers (CSRs) which are local to each
+CPU core (HART in RISC-V terminology) and can be read or written by software.
+Some of these CSRs are used to control local interrupts connected to the core.
+Every interrupt is ultimately routed through a hart's HLIC before it
+interrupts that hart.
+
+The RISC-V supervisor ISA manual specifies three interrupt sources that are
+attached to every HLIC: software interrupts, the timer interrupt, and external
+interrupts.  Software interrupts are used to send IPIs between cores.  The
+timer interrupt comes from an architecturally mandated real-time timer that is
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads.  External
+interrupts connect all other device interrupts to the HLIC, which are routed
+via the platform-level interrupt controller (PLIC).
+
+All RISC-V systems that conform to the supervisor ISA specification are
+required to have a HLIC with these three interrupt sources present.  Since the
+interrupt map is defined by the ISA it's not listed in the HLIC's device tree
+entry, though external interrupt controllers (like the PLIC, for example) will
+need to define how their interrupts map to the relevant HLICs.  This means
+a PLIC interrupt property will typically list the HLICs for all present HARTs
+in the system.
+
+Required properties:
+- compatible : "riscv,cpu-intc"
+- #interrupt-cells : should be <1>.  The interrupt sources are defined by the
+  RISC-V supervisor ISA manual, with only the following three interrupts being
+  defined for supervisor mode:
+    - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+      call and is reserved for use by software.
+    - Source 5 is the supervisor timer interrupt, which can be configured by
+      SBI calls and implements a one-shot timer.
+    - Source 9 is the supervisor external interrupt, which chains to all other
+      device interrupts.
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Furthermore, this interrupt-controller MUST be embedded inside the cpu
+definition of the hart whose CSRs control these local interrupts.
+
+An example device tree entry for a HLIC is show below.
+
+	cpu1: cpu@1 {
+		compatible = "riscv";
+		...
+		cpu1-intc: interrupt-controller {
+			#interrupt-cells = <1>;
+			compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
+			interrupt-controller;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
new file mode 100644
index 0000000000..72456a07da
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/samsung,exynos4210-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Interrupt Combiner Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Samsung's Exynos4 architecture includes a interrupt combiner controller which
+  can combine interrupt sources as a group and provide a single interrupt
+  request for the group. The interrupt request from each group are connected to
+  a parent interrupt controller, such as GIC in case of Exynos4210.
+
+  The interrupt combiner controller consists of multiple combiners. Up to eight
+  interrupt sources can be connected to a combiner. The combiner outputs one
+  combined interrupt for its eight interrupt sources. The combined interrupt is
+  usually connected to a parent interrupt controller.
+
+  A single node in the device tree is used to describe the interrupt combiner
+  controller module (which includes multiple combiners). A combiner in the
+  interrupt controller module shares config/control registers with other
+  combiners. For example, a 32-bit interrupt enable/disable config register can
+  accommodate up to 4 interrupt combiners (with each combiner supporting up to
+  8 interrupt sources).
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: samsung,exynos4210-combiner
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 8
+    maxItems: 32
+
+  "#interrupt-cells":
+    description: |
+      The meaning of the cells are:
+        * First Cell: Combiner Group Number.
+        * Second Cell: Interrupt number within the group.
+    const: 2
+
+  reg:
+    maxItems: 1
+
+  samsung,combiner-nr:
+    description: |
+      The number of interrupt combiners supported.  Should match number
+      of interrupts set in "interrupts" property.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 32
+    default: 16
+
+required:
+  - compatible
+  - interrupt-controller
+  - interrupts
+  - "#interrupt-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@10440000 {
+        compatible = "samsung,exynos4210-combiner";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x10440000 0x1000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
new file mode 100644
index 0000000000..dc1f28e552
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Platform-Level Interrupt Controller (PLIC)
+
+description:
+  SiFive SoCs and other RISC-V SoCs include an implementation of the
+  Platform-Level Interrupt Controller (PLIC) high-level specification in
+  the RISC-V Privileged Architecture specification. The PLIC connects all
+  external interrupts in the system to all hart contexts in the system, via
+  the external interrupt source in each hart.
+
+  A hart context is a privilege mode in a hardware execution thread. For example,
+  in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+  privilege modes per hart; machine mode and supervisor mode.
+
+  Each interrupt can be enabled on per-context basis. Any context can claim
+  a pending enabled interrupt and then release it once it has been handled.
+
+  Each interrupt has a configurable priority. Higher priority interrupts are
+  serviced first.  Each context can specify a priority threshold. Interrupts
+  with priority below this threshold will not cause the PLIC to raise its
+  interrupt line leading to the context.
+
+  The PLIC supports both edge-triggered and level-triggered interrupts. For
+  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+  seen while an interrupt handler is active; the PLIC may either queue them or
+  ignore them. In the first case, handlers are oblivious to the trigger type, so
+  it is not included in the interrupt specifier. In the second case, software
+  needs to know the trigger type, so it can reorder the interrupt flow to avoid
+  missing interrupts. This special handling is needed by at least the Renesas
+  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
+
+  While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+  "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+  contains a specific memory layout, which is documented in chapter 8 of the
+  SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+  T-HEAD PLIC implementation requires setting a delegation bit to allow access
+  from S-mode. So add thead,c900-plic to distinguish them.
+
+maintainers:
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@dabbelt.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-plic
+          - const: andestech,nceplic100
+      - items:
+          - enum:
+              - canaan,k210-plic
+              - sifive,fu540-c000-plic
+              - starfive,jh7100-plic
+              - starfive,jh7110-plic
+          - const: sifive,plic-1.0.0
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-plic
+              - thead,th1520-plic
+          - const: thead,c900-plic
+      - items:
+          - const: sifive,plic-1.0.0
+          - const: riscv,plic0
+        deprecated: true
+        description: For the QEMU virt machine only
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  '#interrupt-cells': true
+
+  interrupt-controller: true
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 15872
+    description:
+      Specifies which contexts are connected to the PLIC, with "-1" specifying
+      that a context is not present. Each node pointed to should be a
+      riscv,cpu-intc node, which has a riscv node as parent.
+
+  riscv,ndev:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies how many external interrupts are supported by this controller.
+
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - interrupts-extended
+  - riscv,ndev
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - andestech,nceplic100
+              - thead,c900-plic
+
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 2
+
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+        - power-domains
+        - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    plic: interrupt-controller@c000000 {
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+      interrupt-controller;
+      interrupts-extended = <&cpu0_intc 11>,
+                            <&cpu1_intc 11>, <&cpu1_intc 9>,
+                            <&cpu2_intc 11>, <&cpu2_intc 9>,
+                            <&cpu3_intc 11>, <&cpu3_intc 9>,
+                            <&cpu4_intc 11>, <&cpu4_intc 9>;
+      reg = <0xc000000 0x4000000>;
+      riscv,ndev = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
new file mode 100644
index 0000000000..9a5d562435
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
@@ -0,0 +1,24 @@
+* ARC700 incore Interrupt Controller
+
+  The core interrupt controller provides 32 prioritised interrupts (2 levels)
+  to ARC700 core.
+
+Properties:
+
+- compatible: "snps,arc700-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1>.
+
+  Single Cell "interrupts" property of a device specifies the IRQ number
+  between 0 to 31
+
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+Example:
+
+	intc: interrupt-controller {
+		compatible = "snps,arc700-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
new file mode 100644
index 0000000000..a5c1db95b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -0,0 +1,46 @@
+* ARC-HS Interrupt Distribution Unit
+
+  This optional 2nd level interrupt controller can be used in SMP configurations
+  for dynamic IRQ routing, load balancing of common/external IRQs towards core
+  intc.
+
+Properties:
+
+- compatible: "snps,archs-idu-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1> or <2>.
+
+  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
+  Number N of the particular interrupt line of IDU corresponds to the line N+24
+  of the core interrupt controller.
+
+  The (optional) second cell specifies any of the following flags:
+    - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = NOT SUPPORTED (high-to-low edge triggered)
+        4 = active high level-sensitive <<< DEFAULT
+        8 = NOT SUPPORTED (active low level-sensitive)
+  When no second cell is specified, the interrupt is assumed to be level
+  sensitive.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
+
+Example:
+	core_intc: core-interrupt-controller {
+		compatible = "snps,archs-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	idu_intc: idu-interrupt-controller {
+		compatible = "snps,archs-idu-intc";
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		#interrupt-cells = <1>;
+	};
+
+	some_device: serial@c0fc1000 {
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0>;	/* upstream idu IRQ #24 */
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt
new file mode 100644
index 0000000000..69f326d6a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt
@@ -0,0 +1,22 @@
+* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA)
+
+Properties:
+
+- compatible: "snps,archs-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1>.
+
+  Single Cell "interrupts" property of a device specifies the IRQ number
+  between 16 to 256
+
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+Example:
+
+	intc: interrupt-controller {
+		compatible = "snps,archs-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts = <16 17 18 19 20 21 22 23 24 25>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
new file mode 100644
index 0000000000..2db59df940
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -0,0 +1,43 @@
+Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+Synopsys DesignWare provides interrupt controller IP for APB known as
+dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
+APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
+controller in some SoCs, e.g. Hisilicon SD5203.
+
+Required properties:
+- compatible: shall be "snps,dw-apb-ictl"
+- reg: physical base address of the controller and length of memory mapped
+  region starting with ENABLE_LOW register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+
+Additional required property when it's used as secondary interrupt controller:
+- interrupts: interrupt reference to primary interrupt controller
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of low interrupts,
+- 1 maps to bit 1 of low interrupts,
+- 32 maps to bit 0 of high interrupts,
+- 33 maps to bit 1 of high interrupts,
+- (optional) fast interrupts start at 64.
+
+Example:
+	/* dw_apb_ictl is used as secondary interrupt controller */
+	aic: interrupt-controller@3000 {
+		compatible = "snps,dw-apb-ictl";
+		reg = <0x3000 0xc00>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	/* dw_apb_ictl is used as primary interrupt controller */
+	vic: interrupt-controller@10130000 {
+		compatible = "snps,dw-apb-ictl";
+		reg = <0x10130000 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml
new file mode 100644
index 0000000000..92cec2255c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,synquacer-exiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer External Interrupt Unit (EXIU)
+
+maintainers:
+  - Ard Biesheuvel <ardb@kernel.org>
+
+description: |+
+  The Socionext SynQuacer SoC has an external interrupt unit (EXIU)
+  that forwards a block of 32 configurable input lines to 32 adjacent
+  level-high type GICv3 SPIs.
+
+properties:
+  compatible:
+    const: socionext,synquacer-exiu
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  socionext,spi-base:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SPI number of the first SPI of the 32 adjacent ones the
+      EXIU forwards its interrupts to.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - socionext,spi-base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@510c0000 {
+        compatible = "socionext,synquacer-exiu";
+        reg = <0x510c0000 0x20>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <3>;
+        socionext,spi-base = <112>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
new file mode 100644
index 0000000000..de7c5e59ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,uniphier-aidet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIDET
+
+description: |
+  UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC
+  (Generic Interrupt Controller). GIC itself can handle only high level and
+  rising edge interrupts. The AIDET provides logic inverter to support low
+  level and falling edge interrupts.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld4-aidet
+      - socionext,uniphier-pro4-aidet
+      - socionext,uniphier-sld8-aidet
+      - socionext,uniphier-pro5-aidet
+      - socionext,uniphier-pxs2-aidet
+      - socionext,uniphier-ld6b-aidet
+      - socionext,uniphier-ld11-aidet
+      - socionext,uniphier-ld20-aidet
+      - socionext,uniphier-pxs3-aidet
+      - socionext,uniphier-nx1-aidet
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: |
+      The first cell defines the interrupt number (corresponds to the SPI
+      interrupt number of GIC). The second cell specifies the trigger type as
+      defined in interrupts.txt in this directory.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@5fc20000 {
+        compatible = "socionext,uniphier-pro4-aidet";
+        reg = <0x5fc20000 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
new file mode 100644
index 0000000000..a407c499b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
@@ -0,0 +1,44 @@
+* SPEAr Shared IRQ layer (shirq)
+
+SPEAr3xx architecture includes shared/multiplexed irqs for certain set
+of devices. The multiplexor provides a single interrupt to parent
+interrupt controller (VIC) on behalf of a group of devices.
+
+There can be multiple groups available on SPEAr3xx variants but not
+exceeding 4. The number of devices in a group can differ, further they
+may share same set of status/mask registers spanning across different
+bit masks. Also in some cases the group may not have enable or other
+registers. This makes software little complex.
+
+A single node in the device tree is used to describe the shared
+interrupt multiplexor (one node for all groups). A group in the
+interrupt controller shares config/control registers with other groups.
+For example, a 32-bit interrupt enable/disable config register can
+accommodate up to 4 interrupt groups.
+
+Required properties:
+  - compatible: should be, either of
+     - "st,spear300-shirq"
+     - "st,spear310-shirq"
+     - "st,spear320-shirq"
+  - interrupt-controller: Identifies the node as an interrupt controller.
+  - #interrupt-cells: should be <1> which basically contains the offset
+    (starting from 0) of interrupts for all the groups.
+  - reg: Base address and size of shirq registers.
+  - interrupts: The list of interrupts generated by the groups which are
+    then connected to a parent interrupt controller. Each group is
+    associated with one of the interrupts, hence number of interrupts (to
+    parent) is equal to number of groups. The format of the interrupt
+    specifier depends in the interrupt parent controller.
+
+Example:
+
+The following is an example from the SPEAr320 SoC dtsi file.
+
+shirq: interrupt-controller@b3000000 {
+	compatible = "st,spear320-shirq";
+	reg = <0xb3000000 0x1000>;
+	interrupts = <28 29 30 1>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
new file mode 100644
index 0000000000..2b153d7c54
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi System Configuration Controlled IRQs
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+description:
+  On STi based systems; External, CTI (Core Sight), PMU (Performance
+  Management), and PL310 L2 Cache IRQs are controlled using System
+  Configuration registers.  This device is used to unmask them prior to use.
+
+properties:
+  compatible:
+    const: st,stih407-irq-syscfg
+
+  st,syscfg:
+    description: Phandle to Cortex-A9 IRQ system config registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  st,irq-device:
+    description: Array of IRQs to enable.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Enable the IRQ of the channel one.
+      - description: Enable the IRQ of the channel two.
+
+  st,fiq-device:
+    description: Array of FIQs to enable.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Enable the IRQ of the channel one.
+      - description: Enable the IRQ of the channel two.
+
+  st,invert-ext:
+    description: External IRQs can be inverted at will. This property inverts
+      these three IRQs using bitwise logic, each one being encoded respectively
+      on the first, second and fourth bit.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4, 5, 6 ]
+
+required:
+  - compatible
+  - st,syscfg
+  - st,irq-device
+  - st,fiq-device
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq-st.h>
+    irq-syscfg {
+        compatible    = "st,stih407-irq-syscfg";
+        st,syscfg     = <&syscfg_cpu>;
+        st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+                        <ST_IRQ_SYSCFG_PMU_1>;
+        st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+                        <ST_IRQ_SYSCFG_DISABLED>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
new file mode 100644
index 0000000000..00c10a8258
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 External Interrupt Controller
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Ludovic Barre <ludovic.barre@foss.st.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32-exti
+              - st,stm32h7-exti
+      - items:
+          - enum:
+              - st,stm32mp1-exti
+              - st,stm32mp13-exti
+          - const: syscon
+
+  "#interrupt-cells":
+    const: 2
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  hwlocks:
+    maxItems: 1
+    description:
+      Reference to a phandle of a hardware spinlock provider node.
+
+  interrupts:
+    minItems: 1
+    maxItems: 96
+    description:
+      Interrupts references to primary interrupt controller
+
+required:
+  - "#interrupt-cells"
+  - compatible
+  - reg
+  - interrupt-controller
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-exti
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 32
+      required:
+        - interrupts
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32h7-exti
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 96
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    //Example 1
+    exti1: interrupt-controller@5000d000 {
+        compatible = "st,stm32mp1-exti", "syscon";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x5000d000 0x400>;
+    };
+
+    //Example 2
+    exti2: interrupt-controller@40013c00 {
+        compatible = "st,stm32-exti";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x40013C00 0x400>;
+        interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 0000000000..bd0021dbab
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    items:
+      - const: sunplus,sp7021-intc
+
+  reg:
+    maxItems: 2
+    description:
+      Specifies base physical address(s) and size of the controller regs.
+      The 1st region include type/polarity/priority/mask regs.
+      The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    maxItems: 2
+    description:
+      EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+      controller.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    intc: interrupt-controller@9c000780 {
+        compatible = "sunplus,sp7021-intc";
+        reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
new file mode 100644
index 0000000000..341ae59093
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
@@ -0,0 +1,14 @@
+TS-4800 FPGA interrupt controller
+
+TS-4800 FPGA has an internal interrupt controller. When one of the
+interrupts is triggered, the SoC is notified, usually using a GPIO as
+parent interrupt source.
+
+Required properties:
+- compatible: should be "technologic,ts4800-irqc"
+- interrupt-controller: identifies the node as an interrupt controller
+- reg: physical base address of the controller and length of memory mapped
+  region
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt
new file mode 100644
index 0000000000..597e8a089f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt
@@ -0,0 +1,27 @@
+* TI Common Platform Interrupt Controller
+
+Common Platform Interrupt Controller (cp_intc) is used on
+OMAP-L1x SoCs and can support several configurable number
+of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+	"ti,cp-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 1.
+
+  The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+	intc: interrupt-controller@1 {
+		compatible = "ti,cp-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		ti,intc-size = <101>;
+		reg = <0xfffee000 0x2000>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
new file mode 100644
index 0000000000..5f94d7739d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
@@ -0,0 +1,36 @@
+Keystone 2 IRQ controller IP
+
+On Keystone SOCs, DSP cores can send interrupts to ARM
+host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
+The IRQ handler running on HOST OS can identify DSP signal source by
+analyzing SRCCx bits in IPCARx registers. This is one of the component
+used by the IPC mechanism used on Keystone SOCs.
+
+Required Properties:
+- compatible: should be "ti,keystone-irq"
+- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
+			access device control registers and the offset inside
+			device control registers range.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+					 source should be 1.
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+	kirq0: keystone_irq0@26202a0 {
+		compatible = "ti,keystone-irq";
+		ti,syscon-dev = <&devctrl 0x2a0>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	dsp0: dsp0 {
+		compatible = "linux,rproc-user";
+		...
+		interrupt-parent = <&kirq0>;
+		interrupts = <10 2>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
new file mode 100644
index 0000000000..38ce5d0377
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
@@ -0,0 +1,28 @@
+Omap2/3 intc controller
+
+On TI omap2 and 3 the intc interrupt controller can provide
+96 or 128 IRQ signals to the ARM host depending on the SoC.
+
+Required Properties:
+- compatible: should be one of
+			"ti,omap2-intc"
+			"ti,omap3-intc"
+			"ti,dm814-intc"
+			"ti,dm816-intc"
+			"ti,am33xx-intc"
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+		     source, should be 1 for intc
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+	intc: interrupt-controller@48200000 {
+		compatible = "ti,omap3-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x48200000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt
new file mode 100644
index 0000000000..f2583e6ec0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt
@@ -0,0 +1,27 @@
+* OMAP Interrupt Controller
+
+OMAP2/3 are using a TI interrupt controller that can support several
+configurable number of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+	"ti,omap2-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 1.
+
+  The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+	intc: interrupt-controller@1 {
+		compatible = "ti,omap2-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		ti,intc-size = <96>;
+		reg = <0x48200000 0x1000>;
+	};
+
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
new file mode 100644
index 0000000000..422d6908f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -0,0 +1,31 @@
+TI OMAP4 Wake-up Generator
+
+All TI OMAP4/5 (and their derivatives) an interrupt controller that
+routes interrupts to the GIC, and also serves as a wakeup source. It
+is also referred to as "WUGEN-MPU", hence the name of the binding.
+
+Required properties:
+
+- compatible : should contain at least "ti,omap4-wugen-mpu" or
+  "ti,omap5-wugen-mpu"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 3.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+  interrupt specifier must be that of the GIC.
+- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
+  are explicitly forbidden.
+
+Example:
+
+       wakeupgen: interrupt-controller@48281000 {
+               compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+               interrupt-controller;
+               #interrupt-cells = <3>;
+               reg = <0x48281000 0x1000>;
+               interrupt-parent = <&gic>;
+       };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
new file mode 100644
index 0000000000..3cd5a1822e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU-ICSS Local Interrupt Controller
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  Each PRU-ICSS has a single interrupt controller instance that is common
+  to all the PRU cores. Most interrupt controllers can route 64 input events
+  which are then mapped to 10 possible output interrupts through two levels
+  of mapping. The input events can be triggered by either the PRUs and/or
+  various other PRUSS internal and external peripherals. The first 2 output
+  interrupts (0, 1) are fed exclusively to the internal PRU cores, with the
+  remaining 8 (2 through 9) connected to external interrupt controllers
+  including the MPU and/or other PRUSS instances, DSPs or devices.
+
+  The property "ti,irqs-reserved" is used for denoting the connection
+  differences on the output interrupts 2 through 9. If this property is not
+  defined, it implies that all the PRUSS INTC output interrupts 2 through 9
+  (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt
+  controller.
+
+  The K3 family of SoCs can handle 160 input events that can be mapped to 20
+  different possible output interrupts. The additional output interrupts (10
+  through 19) are connected to new sub-modules within the ICSSG instances.
+
+  This interrupt-controller node should be defined as a child node of the
+  corresponding PRUSS node. The node should be named "interrupt-controller".
+
+properties:
+  $nodename:
+    pattern: "^interrupt-controller@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,pruss-intc
+      - ti,icssg-intc
+    description: |
+      Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs,
+                              AM335x family of SoCs,
+                              AM437x family of SoCs,
+                              AM57xx family of SoCs
+                              66AK2G family of SoCs
+      Use "ti,icssg-intc" for K3 AM65x, J721E and AM64x family of SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: |
+      All the interrupts generated towards the main host processor in the SoC.
+      A shared interrupt can be skipped if the desired destination and usage is
+      by a different processor/device.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      pattern: host_intr[0-7]
+    description: |
+      Should use one of the above names for each valid host event interrupt
+      connected to Arm interrupt controller, the name should match the
+      corresponding host event interrupt number.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      Client users shall use the PRU System event number (the interrupt source
+      that the client is interested in) [cell 1], PRU channel [cell 2] and PRU
+      host_event (target) [cell 3] as the value of the interrupts property in
+      their node.  The system events can be mapped to some output host
+      interrupts through 2 levels of many-to-one mapping i.e. events to channel
+      mapping and channels to host interrupts so through this property entire
+      mapping is provided.
+
+  ti,irqs-reserved:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC
+      output interrupts 2 through 9) that are not connected to the Arm interrupt
+      controller or are shared and used by other devices or processors in the
+      SoC. Define this property when any of 8 interrupts should not be handled
+      by Arm interrupt controller.
+        Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt
+              connected to MPU
+            - AM65x and J721E SoCs have "host_intr5", "host_intr6" and
+              "host_intr7" interrupts connected to MPU, and other ICSSG
+              instances.
+            - AM64x SoCs have all the 8 host interrupts connected to various
+              other SoC entities
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM33xx PRU-ICSS */
+    pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+  - |
+
+    /* AM4376 PRU-ICSS */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pruss@0 {
+        compatible = "ti,am4376-pruss1";
+        reg = <0x0 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4",
+                              "host_intr6", "host_intr7";
+            ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
new file mode 100644
index 0000000000..6a49d74b99
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Aggregator
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Aggregator (INTA) provides a centralized machine
+  which handles the termination of system events to that they can
+  be coherently processed by the host(s) in the system. A maximum
+  of 64 events can be mapped to a single interrupt.
+
+                                Interrupt Aggregator
+                       +-----------------------------------------+
+                       |      Intmap            VINT             |
+                       | +--------------+  +------------+        |
+              m ------>| | vint  | bit  |  | 0 |.....|63| vint0  |
+                 .     | +--------------+  +------------+        |      +------+
+                 .     |         .               .               |      | HOST |
+  Globalevents  ------>|         .               .               |----->| IRQ  |
+                 .     |         .               .               |      | CTRL |
+                 .     |         .               .               |      +------+
+              n ------>| +--------------+  +------------+        |
+                       | | vint  | bit  |  | 0 |.....|63| vintx  |
+                       | +--------------+  +------------+        |
+                       |                                         |
+                       |      Unmap                              |
+                       | +--------------+                        |
+  Unmapped events ---->| |   umapidx    |-------------------------> Globalevents
+                       | +--------------+                        |
+                       |                                         |
+                       +-----------------------------------------+
+
+  Configuration of these Intmap registers that maps global events to vint is
+  done by a system controller (like the Device Memory and Security Controller
+  on AM654 SoC). Driver should request the system controller to get the range
+  of global events and vints assigned to the requesting host. Management
+  of these requested resources should be handled by driver and requests
+  system controller to map specific global event to vint, bit pair.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-inta
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 0
+
+  msi-controller: true
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTA output hw irq numbers
+      to parents's input interrupt numbers.
+    items:
+      items:
+        - description: |
+            "output_irq" specifies the base for inta output irq
+        - description: |
+            "parent's input irq" specifies the base for parent irq
+        - description: |
+            "limit" specifies the limit for translation
+
+  ti,unmapped-event-sources:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Array of phandles to DMA controllers where the unmapped events originate.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - msi-controller
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_udmass_inta: msi-controller@33d00000 {
+            compatible = "ti,sci-inta";
+            reg = <0x0 0x33d00000 0x0 0x100000>;
+            interrupt-controller;
+            msi-controller;
+            interrupt-parent = <&main_navss_intr>;
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <179>;
+            ti,interrupt-ranges = <0 0 256>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
new file mode 100644
index 0000000000..c99cc7323c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Router
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Router (INTR) module provides a mechanism to mux M
+  interrupt inputs to N interrupt outputs, where all M inputs are selectable
+  to be driven per N output. An Interrupt Router can either handle edge
+  triggered or level triggered interrupts and that is fixed in hardware.
+
+                                   Interrupt Router
+                               +----------------------+
+                               |  Inputs     Outputs  |
+          +-------+            | +------+    +-----+  |
+          | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
+          +-------+            | +------+    +-----+  |      controller
+                               |    .           .     |      +-------+
+          +-------+            |    .           .     |----->|  IRQ  |
+          | INTA  |----------->|    .           .     |      +-------+
+          +-------+            |    .        +-----+  |
+                               | +------+    |  N  |  |
+                               | | irqM |    +-----+  |
+                               | +------+             |
+                               |                      |
+                               +----------------------+
+
+  There is one register per output (MUXCNTL_N) that controls the selection.
+  Configuration of these MUXCNTL_N registers is done by a system controller
+  (like the Device Memory and Security Controller on K3 AM654 SoC). System
+  controller will keep track of the used and unused registers within the Router.
+  Driver should request the system controller to get the range of GIC IRQs
+  assigned to the requesting hosts. It is the drivers responsibility to keep
+  track of Host IRQs.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-intr
+
+  ti,intr-trigger-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4]
+    description: |
+      Should be one of the following.
+        1 = If intr supports edge triggered interrupts.
+        4 = If intr supports level triggered interrupts.
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: |
+      The 1st cell should contain interrupt router input hw number.
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTR output hw irq numbers
+      to parents's input interrupt numbers.
+    items:
+      items:
+        - description: |
+            "output_irq" specifies the base for intr output irq
+        - description: |
+            "parent's input irq" specifies the base for parent irq
+        - description: |
+            "limit" specifies the limit for translation
+
+required:
+  - compatible
+  - ti,intr-trigger-type
+  - interrupt-controller
+  - '#interrupt-cells'
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    main_gpio_intr: interrupt-controller0 {
+        compatible = "ti,sci-intr";
+        ti,intr-trigger-type = <1>;
+        interrupt-controller;
+        interrupt-parent = <&gic500>;
+        #interrupt-cells = <1>;
+        ti,sci = <&dmsc>;
+        ti,sci-dev-id = <131>;
+        ti,interrupt-ranges = <0 360 32>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt
new file mode 100644
index 0000000000..0a4ce1051b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt
@@ -0,0 +1,16 @@
+VIA/Wondermedia VT8500 Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-intc"
+- reg : Should contain 1 register ranges(address and length)
+- #interrupt-cells : should be <1>
+
+Example:
+
+	intc: interrupt-controller@d8140000 {
+		compatible = "via,vt8500-intc";
+		interrupt-controller;
+		reg = <0xd8140000 0x10000>;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
new file mode 100644
index 0000000000..e20016f120
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 IOMMU
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#iommu-cells":
+    const: 1
+    description:
+      The content of the cell is the master ID.
+
+  compatible:
+    const: allwinner,sun50i-h6-iommu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#iommu-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      #include <dt-bindings/clock/sun50i-h6-ccu.h>
+      #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+      iommu: iommu@30f0000 {
+          compatible = "allwinner,sun50i-h6-iommu";
+          reg = <0x030f0000 0x10000>;
+          interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&ccu CLK_BUS_IOMMU>;
+          resets = <&ccu RST_BUS_IOMMU>;
+          #iommu-cells = <1>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
new file mode 100644
index 0000000000..903edf85d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,dart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple DART IOMMU
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description: |+
+  Apple SoCs may contain an implementation of their Device Address
+  Resolution Table which provides a mandatory layer of address
+  translations for various masters.
+
+  Each DART instance is capable of handling up to 16 different streams
+  with individual pagetables and page-level read/write protection flags.
+
+  This DART IOMMU also raises interrupts in response to various
+  fault conditions.
+
+properties:
+  compatible:
+    enum:
+      - apple,t8103-dart
+      - apple,t8110-dart
+      - apple,t6000-dart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Reference to the gate clock phandle if required for this IOMMU.
+      Optional since not all IOMMUs are attached to a clock gate.
+
+  '#iommu-cells':
+    const: 1
+    description:
+      Has to be one. The single cell describes the stream id emitted by
+      a master to the IOMMU.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    dart1: iommu@82f80000 {
+      compatible = "apple,t8103-dart";
+      reg = <0x82f80000 0x4000>;
+      interrupts = <1 781 4>;
+      #iommu-cells = <1>;
+    };
+
+    master1 {
+      iommus = <&dart1 0>;
+    };
+
+  - |+
+    dart2a: iommu@82f00000 {
+      compatible = "apple,t8103-dart";
+      reg = <0x82f00000 0x4000>;
+      interrupts = <1 781 4>;
+      #iommu-cells = <1>;
+    };
+    dart2b: iommu@82f80000 {
+      compatible = "apple,t8103-dart";
+      reg = <0x82f80000 0x4000>;
+      interrupts = <1 781 4>;
+      #iommu-cells = <1>;
+    };
+
+    master2 {
+      iommus = <&dart2a 0>, <&dart2b 1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
new file mode 100644
index 0000000000..e87c1520fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,sart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SART DMA address filter
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  Apple SART is a simple address filter for DMA transactions. Regions of
+  physical memory must be added to the SART's allow list before any
+  DMA can target these. Unlike a proper IOMMU no remapping can be done and
+  special support in the consumer driver is required since not all DMA
+  transactions of a single device are subject to SART filtering.
+
+  SART1 has first been used since at least the A11 (iPhone 8 and iPhone X)
+  and allows 36 bit of physical address space and filter entries with sizes
+  up to 24 bit.
+
+  SART2, first seen in A14 and M1, allows 36 bit of physical address space
+  and filter entry size up to 36 bit.
+
+  SART3, first seen in M1 Pro/Max, extends both the address space and filter
+  entry size to 42 bit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: apple,t8112-sart
+          - const: apple,t6000-sart
+      - enum:
+          - apple,t6000-sart
+          - apple,t8103-sart
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu@7bc50000 {
+      compatible = "apple,t8103-sart";
+      reg = <0x7bc50000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
new file mode 100644
index 0000000000..75fcf4cb52
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/arm,smmu-v3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM SMMUv3 Architecture Implementation
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <Robin.Murphy@arm.com>
+
+description: |+
+  The SMMUv3 architecture is a significant departure from previous
+  revisions, replacing the MMIO register interface with in-memory command
+  and event queues and adding support for the ATS and PRI components of
+  the PCIe specification.
+
+properties:
+  $nodename:
+    pattern: "^iommu@[0-9a-f]*"
+  compatible:
+    const: arm,smmu-v3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The combined interrupt is optional, and should only be provided if the
+          hardware supports just a single, combined interrupt line.
+          If provided, then the combined interrupt will be used in preference to
+          any others.
+      - minItems: 1
+        items:
+          enum:
+            - eventq      # Event Queue not empty
+            - gerror      # Global Error activated
+            - cmdq-sync   # CMD_SYNC complete
+            - priq        # PRI Queue not empty
+
+  '#iommu-cells':
+    const: 1
+
+  dma-coherent:
+    description: |
+      Present if page table walks made by the SMMU are cache coherent with the
+      CPU.
+
+      NOTE: this only applies to the SMMU itself, not masters connected
+      upstream of the SMMU.
+
+  msi-parent: true
+
+  hisilicon,broken-prefetch-cmd:
+    type: boolean
+    description: Avoid sending CMD_PREFETCH_* commands to the SMMU.
+
+  cavium,cn9900-broken-page1-regspace:
+    type: boolean
+    description:
+      Replaces all page 1 offsets used for EVTQ_PROD/CONS, PRIQ_PROD/CONS
+      register access with page 0 offsets. Set for Cavium ThunderX2 silicon that
+      doesn't support SMMU page1 register space.
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    iommu@2b400000 {
+            compatible = "arm,smmu-v3";
+            reg = <0x2b400000 0x20000>;
+            interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+            dma-coherent;
+            #iommu-cells = <1>;
+            msi-parent = <&its 0xff0000>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
new file mode 100644
index 0000000000..b1b2cf81b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -0,0 +1,592 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/arm,smmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM System MMU Architecture Implementation
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <Robin.Murphy@arm.com>
+
+description: |+
+  ARM SoCs may contain an implementation of the ARM System Memory
+  Management Unit Architecture, which can be used to provide 1 or 2 stages
+  of address translation to bus masters external to the CPU.
+
+  The SMMU may also raise interrupts in response to various fault
+  conditions.
+
+properties:
+  $nodename:
+    pattern: "^iommu@[0-9a-f]*"
+  compatible:
+    oneOf:
+      - description: Qcom SoCs implementing "arm,smmu-v2"
+        items:
+          - enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
+              - qcom,sm6375-smmu-v2
+          - const: qcom,smmu-v2
+
+      - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
+        items:
+          - enum:
+              - qcom,qcm2290-smmu-500
+              - qcom,qdu1000-smmu-500
+              - qcom,sa8775p-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm670-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sdx75-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6125-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+
+      - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use two previous lists.
+          - enum:
+              - qcom,qcm2290-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
+        items:
+          - enum:
+              - qcom,sa8775p-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6125-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+          - const: qcom,adreno-smmu
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use previous list.
+          - enum:
+              - qcom,sc7280-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+          - const: qcom,adreno-smmu
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
+        items:
+          - enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,sc7180-smmu-v2
+              - qcom,sdm630-smmu-v2
+              - qcom,sdm845-smmu-v2
+              - qcom,sm6350-smmu-v2
+          - const: qcom,adreno-smmu
+          - const: qcom,smmu-v2
+      - description: Qcom Adreno GPUs on Google Cheza platform
+        items:
+          - const: qcom,sdm845-smmu-v2
+          - const: qcom,smmu-v2
+      - description: Marvell SoCs implementing "arm,mmu-500"
+        items:
+          - const: marvell,ap806-smmu-500
+          - const: arm,mmu-500
+      - description: NVIDIA SoCs that require memory controller interaction
+          and may program multiple ARM MMU-500s identically with the memory
+          controller interleaving translations between multiple instances
+          for improved performance.
+        items:
+          - enum:
+              - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
+          - const: nvidia,smmu-500
+      - items:
+          - const: arm,mmu-500
+          - const: arm,smmu-v2
+      - items:
+          - enum:
+              - arm,mmu-400
+              - arm,mmu-401
+          - const: arm,smmu-v1
+      - enum:
+          - arm,smmu-v1
+          - arm,smmu-v2
+          - arm,mmu-400
+          - arm,mmu-401
+          - arm,mmu-500
+          - cavium,smmu-v2
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#global-interrupts':
+    description: The number of global interrupts exposed by the device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 260   # 2 secure, 2 non-secure, and up to 256 perf counters
+
+  '#iommu-cells':
+    enum: [ 1, 2 ]
+    description: |
+      See Documentation/devicetree/bindings/iommu/iommu.txt for details. With a
+      value of 1, each IOMMU specifier represents a distinct stream ID emitted
+      by that device into the relevant SMMU.
+
+      SMMUs with stream matching support and complex masters may use a value of
+      2, where the second cell of the IOMMU specifier represents an SMR mask to
+      combine with the ID in the first cell.  Care must be taken to ensure the
+      set of matched IDs does not result in conflicts.
+
+  interrupts:
+    minItems: 1
+    maxItems: 388   # 260 plus 128 contexts
+    description: |
+      Interrupt list, with the first #global-interrupts entries corresponding to
+      the global interrupts and any following entries corresponding to context
+      interrupts, specified in order of their indexing by the SMMU.
+
+      For SMMUv2 implementations, there must be exactly one interrupt per
+      context bank. In the case of a single, combined interrupt, it must be
+      listed multiple times.
+
+  dma-coherent:
+    description: |
+      Present if page table walks made by the SMMU are cache coherent with the
+      CPU.
+
+      NOTE: this only applies to the SMMU itself, not masters connected
+      upstream of the SMMU.
+
+  calxeda,smmu-secure-config-access:
+    type: boolean
+    description:
+      Enable proper handling of buggy implementations that always use secure
+      access to SMMU configuration registers. In this case non-secure aliases of
+      secure registers have to be used during SMMU configuration.
+
+  stream-match-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      For SMMUs supporting stream matching and using #iommu-cells = <1>,
+      specifies a mask of bits to ignore when matching stream IDs (e.g. this may
+      be programmed into the SMRn.MASK field of every stream match register
+      used). For cases where it is desirable to ignore some portion of every
+      Stream ID (e.g. for certain MMU-500 configurations given globally unique
+      input IDs). This property is not valid for SMMUs using stream indexing, or
+      using stream matching with #iommu-cells = <2>, and may be ignored if
+      present in such cases.
+
+  clock-names:
+    minItems: 1
+    maxItems: 7
+
+  clocks:
+    minItems: 1
+    maxItems: 7
+
+  power-domains:
+    minItems: 1
+    maxItems: 3
+
+  nvidia,memory-controller:
+    description: |
+      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
+      The memory controller needs to be programmed with a mapping of memory
+      client IDs to ARM SMMU stream IDs.
+
+      If this property is absent, the mapping programmed by early firmware
+      will be used and it is not guaranteed that IOMMU translations will be
+      enabled for any given device.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - '#global-interrupts'
+  - '#iommu-cells'
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+
+      # The reference to the memory controller is required to ensure that the
+      # memory client to stream ID mapping can be done synchronously with the
+      # IOMMU attachment.
+      required:
+        - nvidia,memory-controller
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
+    then:
+      anyOf:
+        - properties:
+            clock-names:
+              items:
+                - const: bus
+            clocks:
+              items:
+                - description: bus clock required for downstream bus access and for
+                    the smmu ptw
+        - properties:
+            clock-names:
+              items:
+                - const: iface
+                - const: mem
+                - const: mem_iface
+            clocks:
+              items:
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for memory access
+                - description: bus clock required for GPU memory access
+        - properties:
+            clock-names:
+              items:
+                - const: iface-mm
+                - const: iface-smmu
+                - const: bus-smmu
+            clocks:
+              items:
+                - description: interface clock required to access mnoc's registers
+                    through the TCU's programming interface.
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for the smmu ptw
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6375-smmu-v2
+    then:
+      anyOf:
+        - properties:
+            clock-names:
+              items:
+                - const: bus
+            clocks:
+              items:
+                - description: bus clock required for downstream bus access and for
+                    the smmu ptw
+        - properties:
+            clock-names:
+              items:
+                - const: iface
+                - const: mem
+                - const: mem_iface
+            clocks:
+              items:
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for memory access
+                - description: bus clock required for GPU memory access
+        - properties:
+            clock-names:
+              items:
+                - const: iface-mm
+                - const: iface-smmu
+                - const: bus-mm
+                - const: bus-smmu
+            clocks:
+              items:
+                - description: interface clock required to access mnoc's registers
+                    through the TCU's programming interface.
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for downstream bus access
+                - description: bus clock required for the smmu ptw
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,sc7180-smmu-v2
+              - qcom,sdm845-smmu-v2
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8280xp-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gcc_gpu_memnoc_gfx_clk
+            - const: gcc_gpu_snoc_dvm_gfx_clk
+            - const: gpu_cc_ahb_clk
+            - const: gpu_cc_hlos1_vote_gpu_smmu_clk
+            - const: gpu_cc_cx_gmu_clk
+            - const: gpu_cc_hub_cx_int_clk
+            - const: gpu_cc_hub_aon_clk
+
+        clocks:
+          items:
+            - description: GPU memnoc_gfx clock
+            - description: GPU snoc_dvm_gfx clock
+            - description: GPU ahb clock
+            - description: GPU hlos1_vote_GPU smmu clock
+            - description: GPU cx_gmu clock
+            - description: GPU hub_cx_int clock
+            - description: GPU hub_aon clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-smmu-v2
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahb
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for AHB bus access
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
+                - qcom,sm6115-smmu-500
+                - qcom,sm6125-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: mem
+            - const: hlos
+            - const: iface
+
+        clocks:
+          items:
+            - description: GPU memory bus clock
+            - description: Voter clock required for HLOS SMMU access
+            - description: Interface clock required for register access
+
+  # Disallow clocks for all other platforms with specific compatibles
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cavium,smmu-v2
+              - marvell,ap806-smmu-500
+              - nvidia,smmu-500
+              - qcom,qcm2290-smmu-500
+              - qcom,qdu1000-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sdm670-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
+    then:
+      properties:
+        clock-names: false
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sm6375-smmu-500
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: SNoC MMU TBU RT GDSC
+            - description: SNoC MMU TBU NRT GDSC
+            - description: SNoC TURING MMU TBU0 GDSC
+
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+
+examples:
+  - |+
+    /* SMMU with stream matching or stream indexing */
+    smmu1: iommu@ba5e0000 {
+            compatible = "arm,smmu-v1";
+            reg = <0xba5e0000 0x10000>;
+            #global-interrupts = <2>;
+            interrupts = <0 32 4>,
+                         <0 33 4>,
+                         <0 34 4>, /* This is the first context interrupt */
+                         <0 35 4>,
+                         <0 36 4>,
+                         <0 37 4>;
+            #iommu-cells = <1>;
+    };
+
+    /* device with two stream IDs, 0 and 7 */
+    master1 {
+            iommus = <&smmu1 0>,
+                     <&smmu1 7>;
+    };
+
+
+    /* SMMU with stream matching */
+    smmu2: iommu@ba5f0000 {
+            compatible = "arm,smmu-v1";
+            reg = <0xba5f0000 0x10000>;
+            #global-interrupts = <2>;
+            interrupts = <0 38 4>,
+                         <0 39 4>,
+                         <0 40 4>, /* This is the first context interrupt */
+                         <0 41 4>,
+                         <0 42 4>,
+                         <0 43 4>;
+            #iommu-cells = <2>;
+    };
+
+    /* device with stream IDs 0 and 7 */
+    master2 {
+            iommus = <&smmu2 0 0>,
+                     <&smmu2 7 0>;
+    };
+
+    /* device with stream IDs 1, 17, 33 and 49 */
+    master3 {
+            iommus = <&smmu2 1 0x30>;
+    };
+
+
+    /* ARM MMU-500 with 10-bit stream ID input configuration */
+    smmu3: iommu@ba600000 {
+            compatible = "arm,mmu-500", "arm,smmu-v2";
+            reg = <0xba600000 0x10000>;
+            #global-interrupts = <2>;
+            interrupts = <0 44 4>,
+                         <0 45 4>,
+                         <0 46 4>, /* This is the first context interrupt */
+                         <0 47 4>,
+                         <0 48 4>,
+                         <0 49 4>;
+            #iommu-cells = <1>;
+            /* always ignore appended 5-bit TBU number */
+            stream-match-mask = <0x7c00>;
+    };
+
+    bus {
+            /* bus whose child devices emit one unique 10-bit stream
+               ID each, but may master through multiple SMMU TBUs */
+            iommu-map = <0 &smmu3 0 0x400>;
+
+
+    };
+
+  - |+
+    /* Qcom's arm,smmu-v2 implementation */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    smmu4: iommu@d00000 {
+      compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+      reg = <0xd00000 0x10000>;
+
+      #global-interrupts = <1>;
+      interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+             <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+      #iommu-cells = <1>;
+      power-domains = <&mmcc 0>;
+
+      clocks = <&mmcc 123>,
+        <&mmcc 124>;
+      clock-names = "bus", "iface";
+    };
diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt
new file mode 100644
index 0000000000..26ba9e530f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/iommu.txt
@@ -0,0 +1,206 @@
+This document describes the generic device tree binding for IOMMUs and their
+master(s).
+
+
+IOMMU device node:
+==================
+
+An IOMMU can provide the following services:
+
+* Remap address space to allow devices to access physical memory ranges that
+  they otherwise wouldn't be capable of accessing.
+
+  Example: 32-bit DMA to 64-bit physical addresses
+
+* Implement scatter-gather at page level granularity so that the device does
+  not have to.
+
+* Provide system protection against "rogue" DMA by forcing all accesses to go
+  through the IOMMU and faulting when encountering accesses to unmapped
+  address regions.
+
+* Provide address space isolation between multiple contexts.
+
+  Example: Virtualization
+
+Device nodes compatible with this binding represent hardware with some of the
+above capabilities.
+
+IOMMUs can be single-master or multiple-master. Single-master IOMMU devices
+typically have a fixed association to the master device, whereas multiple-
+master IOMMU devices can translate accesses from more than one master.
+
+The device tree node of the IOMMU device's parent bus must contain a valid
+"dma-ranges" property that describes how the physical address space of the
+IOMMU maps to memory. An empty "dma-ranges" property means that there is a
+1:1 mapping from IOMMU to memory.
+
+Required properties:
+--------------------
+- #iommu-cells: The number of cells in an IOMMU specifier needed to encode an
+  address.
+
+The meaning of the IOMMU specifier is defined by the device tree binding of
+the specific IOMMU. Below are a few examples of typical use-cases:
+
+- #iommu-cells = <0>: Single master IOMMU devices are not configurable and
+  therefore no additional information needs to be encoded in the specifier.
+  This may also apply to multiple master IOMMU devices that do not allow the
+  association of masters to be configured. Note that an IOMMU can by design
+  be multi-master yet only expose a single master in a given configuration.
+  In such cases the number of cells will usually be 1 as in the next case.
+- #iommu-cells = <1>: Multiple master IOMMU devices may need to be configured
+  in order to enable translation for a given master. In such cases the single
+  address cell corresponds to the master device's ID. In some cases more than
+  one cell can be required to represent a single master ID.
+- #iommu-cells = <4>: Some IOMMU devices allow the DMA window for masters to
+  be configured. The first cell of the address in this may contain the master
+  device's ID for example, while the second cell could contain the start of
+  the DMA window for the given device. The length of the DMA window is given
+  by the third and fourth cells.
+
+Note that these are merely examples and real-world use-cases may use different
+definitions to represent their individual needs. Always refer to the specific
+IOMMU binding for the exact meaning of the cells that make up the specifier.
+
+
+IOMMU master node:
+==================
+
+Devices that access memory through an IOMMU are called masters. A device can
+have multiple master interfaces (to one or more IOMMU devices).
+
+Required properties:
+--------------------
+- iommus: A list of phandle and IOMMU specifier pairs that describe the IOMMU
+  master interfaces of the device. One entry in the list describes one master
+  interface of the device.
+
+When an "iommus" property is specified in a device tree node, the IOMMU will
+be used for address translation. If a "dma-ranges" property exists in the
+device's parent node it will be ignored. An exception to this rule is if the
+referenced IOMMU is disabled, in which case the "dma-ranges" property of the
+parent shall take effect. Note that merely disabling a device tree node does
+not guarantee that the IOMMU is really disabled since the hardware may not
+have a means to turn off translation. But it is invalid in such cases to
+disable the IOMMU's device tree node in the first place because it would
+prevent any driver from properly setting up the translations.
+
+Optional properties:
+--------------------
+- pasid-num-bits: Some masters support multiple address spaces for DMA, by
+  tagging DMA transactions with an address space identifier. By default,
+  this is 0, which means that the device only has one address space.
+
+- dma-can-stall: When present, the master can wait for a transaction to
+  complete for an indefinite amount of time. Upon translation fault some
+  IOMMUs, instead of aborting the translation immediately, may first
+  notify the driver and keep the transaction in flight. This allows the OS
+  to inspect the fault and, for example, make physical pages resident
+  before updating the mappings and completing the transaction. Such IOMMU
+  accepts a limited number of simultaneous stalled transactions before
+  having to either put back-pressure on the master, or abort new faulting
+  transactions.
+
+  Firmware has to opt-in stalling, because most buses and masters don't
+  support it. In particular it isn't compatible with PCI, where
+  transactions have to complete before a time limit. More generally it
+  won't work in systems and masters that haven't been designed for
+  stalling. For example the OS, in order to handle a stalled transaction,
+  may attempt to retrieve pages from secondary storage in a stalled
+  domain, leading to a deadlock.
+
+
+Notes:
+======
+
+One possible extension to the above is to use an "iommus" property along with
+a "dma-ranges" property in a bus device node (such as PCI host bridges). This
+can be useful to describe how children on the bus relate to the IOMMU if they
+are not explicitly listed in the device tree (e.g. PCI devices). However, the
+requirements of that use-case haven't been fully determined yet. Implementing
+this is therefore not recommended without further discussion and extension of
+this binding.
+
+
+Examples:
+=========
+
+Single-master IOMMU:
+--------------------
+
+	iommu {
+		#iommu-cells = <0>;
+	};
+
+	master {
+		iommus = <&{/iommu}>;
+	};
+
+Multiple-master IOMMU with fixed associations:
+----------------------------------------------
+
+	/* multiple-master IOMMU */
+	iommu {
+		/*
+		 * Masters are statically associated with this IOMMU and share
+		 * the same address translations because the IOMMU does not
+		 * have sufficient information to distinguish between masters.
+		 *
+		 * Consequently address translation is always on or off for
+		 * all masters at any given point in time.
+		 */
+		#iommu-cells = <0>;
+	};
+
+	/* static association with IOMMU */
+	master@1 {
+		reg = <1>;
+		iommus = <&{/iommu}>;
+	};
+
+	/* static association with IOMMU */
+	master@2 {
+		reg = <2>;
+		iommus = <&{/iommu}>;
+	};
+
+Multiple-master IOMMU:
+----------------------
+
+	iommu {
+		/* the specifier represents the ID of the master */
+		#iommu-cells = <1>;
+	};
+
+	master@1 {
+		/* device has master ID 42 in the IOMMU */
+		iommus = <&{/iommu} 42>;
+	};
+
+	master@2 {
+		/* device has master IDs 23 and 24 in the IOMMU */
+		iommus = <&{/iommu} 23>, <&{/iommu} 24>;
+	};
+
+Multiple-master IOMMU with configurable DMA window:
+---------------------------------------------------
+
+	/ {
+		iommu {
+			/*
+			 * One cell for the master ID and one cell for the
+			 * address of the DMA window. The length of the DMA
+			 * window is encoded in two cells.
+			 *
+			 * The DMA window is the range addressable by the
+			 * master (i.e. the I/O virtual address space).
+			 */
+			#iommu-cells = <4>;
+		};
+
+		master {
+			/* master ID 42, 4 GiB DMA window starting at 0 */
+			iommus = <&{/iommu}  42  0  0x1 0x0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
new file mode 100644
index 0000000000..ea6b0f5f24
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek IOMMU Architecture Implementation
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |+
+  Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and
+  this M4U have two generations of HW architecture. Generation one uses flat
+  pagetable, and only supports 4K size page mapping. Generation two uses the
+  ARM Short-Descriptor translation table format for address translation.
+
+  About the M4U Hardware Block Diagram, please check below:
+
+                EMI (External Memory Interface)
+                 |
+                m4u (Multimedia Memory Management Unit)
+                 |
+            +--------+
+            |        |
+        gals0-rx   gals1-rx    (Global Async Local Sync rx)
+            |        |
+            |        |
+        gals0-tx   gals1-tx    (Global Async Local Sync tx)
+            |        |          Some SoCs may have GALS.
+            +--------+
+                 |
+             SMI Common(Smart Multimedia Interface Common)
+                 |
+         +----------------+-------
+         |                |
+         |             gals-rx        There may be GALS in some larbs.
+         |                |
+         |                |
+         |             gals-tx
+         |                |
+     SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
+     (display)         (vdec)
+         |                |
+         |                |
+   +-----+-----+     +----+----+
+   |     |     |     |    |    |
+   |     |     |...  |    |    |  ... There are different ports in each larb.
+   |     |     |     |    |    |
+  OVL0 RDMA0 WDMA0  MC   PP   VLD
+
+  As above, The Multimedia HW will go through SMI and M4U while it
+  access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
+  smi local arbiter and smi common. It will control whether the Multimedia
+  HW should go though the m4u for translation or bypass it and talk
+  directly with EMI. And also SMI help control the power domain and clocks for
+  each local arbiter.
+
+  Normally we specify a local arbiter(larb) for each multimedia HW
+  like display, video decode, and camera. And there are different ports
+  in each larb. Take a example, There are many ports like MC, PP, VLD in the
+  video decode local arbiter, all these ports are according to the video HW.
+
+  In some SoCs, there may be a GALS(Global Async Local Sync) module between
+  smi-common and m4u, and additional GALS module between smi-larb and
+  smi-common. GALS can been seen as a "asynchronous fifo" which could help
+  synchronize for the modules in different clock frequency.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-m4u  # generation one
+          - mediatek,mt2712-m4u  # generation two
+          - mediatek,mt6779-m4u  # generation two
+          - mediatek,mt6795-m4u  # generation two
+          - mediatek,mt8167-m4u  # generation two
+          - mediatek,mt8173-m4u  # generation two
+          - mediatek,mt8183-m4u  # generation two
+          - mediatek,mt8186-iommu-mm         # generation two
+          - mediatek,mt8188-iommu-vdo        # generation two
+          - mediatek,mt8188-iommu-vpp        # generation two
+          - mediatek,mt8188-iommu-infra      # generation two
+          - mediatek,mt8192-m4u  # generation two
+          - mediatek,mt8195-iommu-vdo        # generation two
+          - mediatek,mt8195-iommu-vpp        # generation two
+          - mediatek,mt8195-iommu-infra      # generation two
+          - mediatek,mt8365-m4u  # generation two
+
+      - description: mt7623 generation one
+        items:
+          - const: mediatek,mt7623-m4u
+          - const: mediatek,mt2701-m4u
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bclk is the block clock.
+
+  clock-names:
+    items:
+      - const: bclk
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the mediatek infracfg syscon
+
+  mediatek,larbs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 32
+    items:
+      maxItems: 1
+    description: |
+      List of phandle to the local arbiters in the current Socs.
+      Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
+      according to the local arbiter index, like larb0, larb1, larb2...
+
+  '#iommu-cells':
+    const: 1
+    description: |
+      This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as
+      defined in
+      dt-binding/memory/mediatek,mt8188-memory-port.h for mt8188,
+      dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
+      dt-binding/memory/mt2712-larb-port.h for mt2712,
+      dt-binding/memory/mt6779-larb-port.h for mt6779,
+      dt-binding/memory/mt6795-larb-port.h for mt6795,
+      dt-binding/memory/mt8167-larb-port.h for mt8167,
+      dt-binding/memory/mt8173-larb-port.h for mt8173,
+      dt-binding/memory/mt8183-larb-port.h for mt8183,
+      dt-binding/memory/mt8186-memory-port.h for mt8186,
+      dt-binding/memory/mt8192-larb-port.h for mt8192.
+      dt-binding/memory/mt8195-memory-port.h for mt8195.
+      dt-binding/memory/mediatek,mt8365-larb-port.h for mt8365.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#iommu-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-m4u
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+              - mediatek,mt8186-iommu-mm
+              - mediatek,mt8188-iommu-vdo
+              - mediatek,mt8188-iommu-vpp
+              - mediatek,mt8192-m4u
+              - mediatek,mt8195-iommu-vdo
+              - mediatek,mt8195-iommu-vpp
+
+    then:
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8186-iommu-mm
+            - mediatek,mt8188-iommu-vdo
+            - mediatek,mt8188-iommu-vpp
+            - mediatek,mt8192-m4u
+            - mediatek,mt8195-iommu-vdo
+            - mediatek,mt8195-iommu-vpp
+
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+
+    then:
+      required:
+        - mediatek,infracfg
+
+  - if: # The IOMMUs don't have larbs.
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - mediatek,mt8188-iommu-infra
+                - mediatek,mt8195-iommu-infra
+
+    then:
+      required:
+        - mediatek,larbs
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu: iommu@10205000 {
+            compatible = "mediatek,mt8173-m4u";
+            reg = <0x10205000 0x1000>;
+            interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_M4U>;
+            clock-names = "bclk";
+            mediatek,infracfg = <&infracfg>;
+            mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+                             <&larb3>, <&larb4>, <&larb5>;
+            #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
new file mode 100644
index 0000000000..20236385f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
@@ -0,0 +1,64 @@
+* QCOM IOMMU
+
+The MSM IOMMU is an implementation compatible with the ARM VMSA short
+descriptor page tables. It provides address translation for bus masters outside
+of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+Required Properties:
+
+  - compatible: Must contain "qcom,apq8064-iommu".
+  - reg: Base address and size of the IOMMU registers.
+  - interrupts: Specifiers for the MMU fault interrupts. For instances that
+    support secure mode two interrupts must be specified, for non-secure and
+    secure mode, in that order. For instances that don't support secure mode a
+    single interrupt must be specified.
+  - #iommu-cells: The number of cells needed to specify the stream id. This
+		  is always 1.
+  - qcom,ncb:	  The total number of context banks in the IOMMU.
+  - clocks	: List of clocks to be used during SMMU register access. See
+		  Documentation/devicetree/bindings/clock/clock-bindings.txt
+		  for information about the format. For each clock specified
+		  here, there must be a corresponding entry in clock-names
+		  (see below).
+
+  - clock-names	: List of clock names corresponding to the clocks specified in
+		  the "clocks" property (above).
+		  Should be "smmu_pclk" for specifying the interface clock
+		  required for iommu's register accesses.
+		  Should be "smmu_clk" for specifying the functional clock
+		  required by iommu for bus accesses.
+
+Each bus master connected to an IOMMU must reference the IOMMU in its device
+node with the following property:
+
+  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
+	    phandle to the IOMMU and the second cell is the stream id.
+	    A single master device can be connected to more than one iommu
+	    and multiple contexts in each of the iommu. So multiple entries
+	    are required to list all the iommus and the stream ids that the
+	    master is connected to.
+
+Example: mdp iommu and its bus master
+
+                mdp_port0: iommu@7500000 {
+			compatible = "qcom,apq8064-iommu";
+			#iommu-cells = <1>;
+			clock-names =
+			    "smmu_pclk",
+			    "smmu_clk";
+			clocks =
+			    <&mmcc SMMU_AHB_CLK>,
+			    <&mmcc MDP_AXI_CLK>;
+			reg = <0x07500000 0x100000>;
+			interrupts =
+			    <GIC_SPI 63 0>,
+			    <GIC_SPI 64 0>;
+			qcom,ncb = <2>;
+		};
+
+		mdp: qcom,mdp@5100000 {
+			compatible = "qcom,mdp";
+			...
+			iommus = <&mdp_port0 0
+				  &mdp_port0 2>;
+		};
diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt
new file mode 100644
index 0000000000..89fb5434b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt
@@ -0,0 +1,21 @@
+NVIDIA Tegra 30 IOMMU H/W, SMMU (System Memory Management Unit)
+
+Required properties:
+- compatible : "nvidia,tegra30-smmu"
+- reg : Should contain 3 register banks(address and length) for each
+  of the SMMU register blocks.
+- interrupts : Should contain MC General interrupt.
+- nvidia,#asids : # of ASIDs
+- dma-window : IOVA start address and length.
+- nvidia,ahb : phandle to the ahb bus connected to SMMU.
+
+Example:
+	smmu {
+		compatible = "nvidia,tegra30-smmu";
+		reg = <0x7000f010 0x02c
+		       0x7000f1f0 0x010
+		       0x7000f228 0x05c>;
+		nvidia,#asids = <4>;		/* # of ASIDs */
+		dma-window = <0 0x40000000>;	/* IOVA start & length */
+		nvidia,ahb = <&ahb>;
+	};
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
new file mode 100644
index 0000000000..a74eb899c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies legacy IOMMU implementations
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm "B" family devices which are not compatible with arm-smmu have
+  a similar looking IOMMU, but without access to the global register space
+  and optionally requiring additional configuration to route context IRQs
+  to non-secure vs secure interrupt line.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,msm8916-iommu
+              - qcom,msm8953-iommu
+          - const: qcom,msm-iommu-v1
+      - items:
+          - enum:
+              - qcom,msm8976-iommu
+          - const: qcom,msm-iommu-v2
+
+  clocks:
+    items:
+      - description: Clock required for IOMMU register group access
+      - description: Clock required for underlying bus access
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  qcom,iommu-secure-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SCM secure ID of the IOMMU instance.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#iommu-cells':
+    const: 1
+
+patternProperties:
+  "^iommu-ctx@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - qcom,msm-iommu-v1-ns
+          - qcom,msm-iommu-v1-sec
+          - qcom,msm-iommu-v2-ns
+          - qcom,msm-iommu-v2-sec
+
+      interrupts:
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+
+      qcom,ctx-asid:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The ASID number associated to the context bank.
+
+    required:
+      - compatible
+      - interrupts
+      - reg
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    apps_iommu: iommu@1e20000 {
+      compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+      reg = <0x01ef0000 0x3000>;
+      clocks = <&gcc GCC_SMMU_CFG_CLK>,
+               <&gcc GCC_APSS_TCU_CLK>;
+      clock-names = "iface", "bus";
+      qcom,iommu-secure-id = <17>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      #iommu-cells = <1>;
+      ranges = <0 0x01e20000 0x40000>;
+
+      /* mdp_0: */
+      iommu-ctx@4000 {
+        compatible = "qcom,msm-iommu-v1-ns";
+        reg = <0x4000 0x1000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
new file mode 100644
index 0000000000..be90f68c11
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/renesas,ipmmu-vmsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas VMSA-Compatible IOMMU
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description:
+  The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
+  It provides address translation for bus masters outside of the CPU, each
+  connected to the IPMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a73a4  # R-Mobile APE6
+              - renesas,ipmmu-r8a7742  # RZ/G1H
+              - renesas,ipmmu-r8a7743  # RZ/G1M
+              - renesas,ipmmu-r8a7744  # RZ/G1N
+              - renesas,ipmmu-r8a7745  # RZ/G1E
+              - renesas,ipmmu-r8a7790  # R-Car H2
+              - renesas,ipmmu-r8a7791  # R-Car M2-W
+              - renesas,ipmmu-r8a7793  # R-Car M2-N
+              - renesas,ipmmu-r8a7794  # R-Car E2
+          - const: renesas,ipmmu-vmsa  # R-Mobile APE6 or R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a774a1 # RZ/G2M
+              - renesas,ipmmu-r8a774b1 # RZ/G2N
+              - renesas,ipmmu-r8a774c0 # RZ/G2E
+              - renesas,ipmmu-r8a774e1 # RZ/G2H
+              - renesas,ipmmu-r8a7795  # R-Car H3
+              - renesas,ipmmu-r8a7796  # R-Car M3-W
+              - renesas,ipmmu-r8a77961 # R-Car M3-W+
+              - renesas,ipmmu-r8a77965 # R-Car M3-N
+              - renesas,ipmmu-r8a77970 # R-Car V3M
+              - renesas,ipmmu-r8a77980 # R-Car V3H
+              - renesas,ipmmu-r8a77990 # R-Car E3
+              - renesas,ipmmu-r8a77995 # R-Car D3
+
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a779a0           # R-Car V3U
+              - renesas,ipmmu-r8a779f0           # R-Car S4-8
+              - renesas,ipmmu-r8a779g0           # R-Car V4H
+          - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    description:
+      Specifiers for the MMU fault interrupts. Not required for cache IPMMUs.
+    items:
+      - description: non-secure mode
+      - description: secure mode if supported
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The number of the micro-TLB that the device is connected to.
+
+  power-domains:
+    maxItems: 1
+
+  renesas,ipmmu-main:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - minItems: 1
+        items:
+          - description: phandle to main IPMMU
+          - description:
+              The interrupt bit number associated with the particular cache
+              IPMMU device. If present, the interrupt bit number needs to match
+              the main IPMMU IMSSTR register. Only used by cache IPMMU
+              instances.
+    description:
+      Reference to the main IPMMU.
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+oneOf:
+  - required:
+      - interrupts
+  - required:
+      - renesas,ipmmu-main
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: renesas,ipmmu-vmsa
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar-gen4-ipmmu-vmsa
+    then:
+      properties:
+        renesas,ipmmu-main:
+          items:
+            - maxItems: 1
+    else:
+      properties:
+        renesas,ipmmu-main:
+          items:
+            - minItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    ipmmu_mx: iommu@fe951000 {
+        compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
+        reg = <0xfe951000 0x1000>;
+        interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
new file mode 100644
index 0000000000..ba9124f721
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip IOMMU
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  A Rockchip DRM iommu translates io virtual addresses to physical addresses for
+  its master device. Each slave device is bound to a single master device and
+  shares its clocks, power domain and irq.
+
+  For information on assigning IOMMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,iommu
+      - rockchip,rk3568-iommu
+
+  reg:
+    items:
+      - description: configuration registers for MMU instance 0
+      - description: configuration registers for MMU instance 1
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: interruption for MMU instance 0
+      - description: interruption for MMU instance 1
+    minItems: 1
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: iface
+
+  "#iommu-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,disable-mmu-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Do not use the mmu reset operation.
+      Some mmu instances may produce unexpected results
+      when the reset operation is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vopl_mmu: iommu@ff940300 {
+      compatible = "rockchip,iommu";
+      reg = <0xff940300 0x100>;
+      interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+      clock-names = "aclk", "iface";
+      #iommu-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
new file mode 100644
index 0000000000..672a0beea6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/samsung,sysmmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |+
+  Samsung's Exynos architecture contains System MMUs that enables scattered
+  physical memory chunks visible as a contiguous region to DMA-capable peripheral
+  devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
+
+  System MMU is an IOMMU and supports identical translation table format to
+  ARMv7 translation tables with minimum set of page properties including access
+  permissions, shareability and security protection. In addition, System MMU has
+  another capabilities like L2 TLB or block-fetch buffers to minimize translation
+  latency.
+
+  System MMUs are in many to one relation with peripheral devices, i.e. single
+  peripheral device might have multiple System MMUs (usually one for each bus
+  master), but one System MMU can handle transactions from only one peripheral
+  device. The relation between a System MMU and the peripheral device needs to be
+  defined in device node of the peripheral device.
+
+  MFC in all Exynos SoCs and FIMD, M2M Scalers and G2D in Exynos5420 has 2 System
+  MMUs.
+  * MFC has one System MMU on its left and right bus.
+  * FIMD in Exynos5420 has one System MMU for window 0 and 4, the other system MMU
+    for window 1, 2 and 3.
+  * M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and
+    the other System MMU on the write channel.
+
+  For information on assigning System MMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    const: samsung,exynos-sysmmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: sysmmu
+      - items:
+          - const: sysmmu
+          - const: master
+      - items:
+          - const: aclk
+          - const: pclk
+
+  "#iommu-cells":
+    const: 0
+
+  power-domains:
+    description: |
+      Required if the System MMU is needed to gate its power.
+      Please refer to the following document:
+      Documentation/devicetree/bindings/power/pd-samsung.yaml
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    sysmmu_gsc0: iommu@13e80000 {
+      compatible = "samsung,exynos-sysmmu";
+      reg = <0x13E80000 0x1000>;
+      interrupt-parent = <&combiner>;
+      interrupts = <2 0>;
+      clock-names = "sysmmu", "master";
+      clocks = <&clock CLK_SMMU_GSCL0>,
+               <&clock CLK_GSCL0>;
+      power-domains = <&pd_gsc>;
+      #iommu-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
new file mode 100644
index 0000000000..7003e12f55
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc IOMMU and Multi-media MMU
+
+maintainers:
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,iommu-v1
+
+  "#iommu-cells":
+    const: 0
+    description:
+      Unisoc IOMMUs are all single-master IOMMU devices, therefore no
+      additional information needs to associate with its master device.
+      Please refer to the generic bindings document for more details,
+      Documentation/devicetree/bindings/iommu/iommu.txt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Reference to a gate clock phandle, since access to some of IOMMUs are
+      controlled by gate clock, but this is not required.
+
+required:
+  - compatible
+  - reg
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu_disp: iommu@63000800 {
+      compatible = "sprd,iommu-v1";
+      reg = <0x63000800 0x80>;
+      #iommu-cells = <0>;
+    };
+
+  - |
+    iommu_jpg: iommu@62300300 {
+      compatible = "sprd,iommu-v1";
+      reg = <0x62300300 0x80>;
+      #iommu-cells = <0>;
+      clocks = <&mm_gate 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt b/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
new file mode 100644
index 0000000000..4bd10dd881
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
@@ -0,0 +1,59 @@
+OMAP2+ IOMMU
+
+Required properties:
+- compatible : Should be one of,
+		"ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances
+		"ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances
+		"ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances
+		"ti,dra7-iommu" for DRA7xx IOMMU instances
+- ti,hwmods  : Name of the hwmod associated with the IOMMU instance
+- reg        : Address space for the configuration registers
+- interrupts : Interrupt specifier for the IOMMU instance
+- #iommu-cells : Should be 0. OMAP IOMMUs are all "single-master" devices,
+                 and needs no additional data in the pargs specifier. Please
+                 also refer to the generic bindings document for more info
+                 on this property,
+                     Documentation/devicetree/bindings/iommu/iommu.txt
+
+Optional properties:
+- ti,#tlb-entries : Number of entries in the translation look-aside buffer.
+                    Should be either 8 or 32 (default: 32)
+- ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing
+		          back a bus error response on MMU faults.
+- ti,syscon-mmuconfig : Should be a pair of the phandle to the DSP_SYSTEM
+                        syscon node that contains the additional control
+                        register for enabling the MMU, and the MMU instance
+                        number (0-indexed) within the sub-system. This property
+                        is required for DSP IOMMU instances on DRA7xx SoCs. The
+                        instance number should be 0 for DSP MDMA MMUs and 1 for
+                        DSP EDMA MMUs.
+
+Example:
+	/* OMAP3 ISP MMU */
+	mmu_isp: mmu@480bd400 {
+		#iommu-cells = <0>;
+		compatible = "ti,omap2-iommu";
+		reg = <0x480bd400 0x80>;
+		interrupts = <24>;
+		ti,hwmods = "mmu_isp";
+		ti,#tlb-entries = <8>;
+	};
+
+	/* DRA74x DSP2 MMUs */
+	mmu0_dsp2: mmu@41501000 {
+		compatible = "ti,dra7-dsp-iommu";
+		reg = <0x41501000 0x100>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "mmu0_dsp2";
+		#iommu-cells = <0>;
+		ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+	};
+
+	mmu1_dsp2: mmu@41502000 {
+		compatible = "ti,dra7-dsp-iommu";
+		reg = <0x41502000 0x100>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "mmu1_dsp2";
+		#iommu-cells = <0>;
+		ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+	};
diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 0000000000..3528b81daa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
new file mode 100644
index 0000000000..25f86da804
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -0,0 +1,28 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be one of
+	"aspeed,ast2400-ibt-bmc"
+	"aspeed,ast2500-ibt-bmc"
+	"aspeed,ast2600-ibt-bmc"
+- reg: physical address and size of the registers
+- clocks: clock for the device
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-ibt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+		clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+	};
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
new file mode 100644
index 0000000000..129e32c4c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED BMC KCS Devices
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The Aspeed BMC SoCs typically use the Keyboard-Controller-Style (KCS)
+  interfaces on the LPC bus for in-band IPMI communication with their host.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Channel ID derived from reg
+        items:
+          enum:
+            - aspeed,ast2400-kcs-bmc-v2
+            - aspeed,ast2500-kcs-bmc-v2
+            - aspeed,ast2600-kcs-bmc
+
+      - description: Old-style with explicit channel ID, no reg
+        deprecated: true
+        items:
+          enum:
+            - aspeed,ast2400-kcs-bmc
+            - aspeed,ast2500-kcs-bmc
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    # maxItems: 3
+    items:
+      - description: IDR register
+      - description: ODR register
+      - description: STR register
+
+  aspeed,lpc-io-reg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      The host CPU LPC IO data and status addresses for the device. For most
+      channels the status address is derived from the data address, but the
+      status address may be optionally provided.
+
+  aspeed,lpc-interrupts:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      A 2-cell property expressing the LPC SerIRQ number and the interrupt
+      level/sense encoding (specified in the standard fashion).
+
+      Note that the generated interrupt is issued from the BMC to the host, and
+      thus the target interrupt controller is not captured by the BMC's
+      devicetree.
+
+  kcs_chan:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The LPC channel number in the controller
+
+  kcs_addr:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The host CPU IO map address
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - aspeed,ast2400-kcs-bmc
+              - aspeed,ast2500-kcs-bmc
+    then:
+      required:
+        - kcs_chan
+        - kcs_addr
+    else:
+      required:
+        - reg
+        - aspeed,lpc-io-reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    kcs3: kcs@24 {
+        compatible = "aspeed,ast2600-kcs-bmc";
+        reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+        aspeed,lpc-io-reg = <0xca2>;
+        aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupts = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
new file mode 100644
index 0000000000..52647bff31
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-ipmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI IPMB device
+
+description: IPMI IPMB device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-ipmb
+
+  device_type:
+    items:
+      - const: ipmi
+
+  reg:
+    maxItems: 1
+
+  bmcaddr:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: The address of the BMC on the IPMB bus.  Defaults to 0x20.
+
+  retry-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Time between retries of sends, in milliseconds.  Defaults to 250.
+
+  max-retries:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of retries before a failure is declared.  Defaults to 1.
+
+  slave-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The slave i2c device.  If not present, the main device is used. This
+      lets you use two devices on the IPMB, one for master and one for slave,
+      in case you have a slave device that can only be a slave.  The slave
+      will receive messages and the master will transmit.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ipmi-ipmb@40 {
+                    compatible = "ipmi-ipmb";
+                    device_type = "ipmi";
+                    reg = <0x40>;
+                    bmcaddr = /bits/ 8 <0x20>;
+                    retry-time = <250>;
+                    max-retries = <1>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
new file mode 100644
index 0000000000..4bffa3d861
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI device
+
+description: IPMI device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-kcs
+      - ipmi-smic
+      - ipmi-bt
+
+  device_type:
+    items:
+      - const: ipmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interface is polled if this property is omitted.
+    maxItems: 1
+
+  reg-size:
+    description: The access width of the register in bytes. Defaults to 1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  reg-spacing:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of bytes between register starts. Defaults to 1.
+
+  reg-shift:
+    description: |
+      The amount of bits to shift the register content to the right to get
+      the data into bit zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 56
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smic@fff3a000 {
+        compatible = "ipmi-smic";
+        device_type = "ipmi";
+        reg = <0xfff3a000 0x1000>;
+        interrupts = <0 24 4>;
+        reg-size = <4>;
+        reg-spacing = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
new file mode 100644
index 0000000000..4fda76e633
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
@@ -0,0 +1,40 @@
+* Nuvoton NPCM KCS (Keyboard Controller Style) IPMI interface
+
+The Nuvoton SOCs (NPCM) are commonly used as BMCs
+(Baseboard Management Controllers) and the KCS interface can be
+used to perform in-band IPMI communication with their host.
+
+Required properties:
+- compatible : should be one of
+    "nuvoton,npcm750-kcs-bmc"
+    "nuvoton,npcm845-kcs-bmc", "nuvoton,npcm750-kcs-bmc"
+- interrupts : interrupt generated by the controller
+- kcs_chan : The KCS channel number in the controller
+
+Example:
+
+    lpc_kcs: lpc_kcs@f0007000 {
+        compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
+        reg = <0xf0007000 0x40>;
+        reg-io-width = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf0007000 0x40>;
+
+        kcs1: kcs1@0 {
+            compatible = "nuvoton,npcm750-kcs-bmc";
+            reg = <0x0 0x40>;
+            interrupts = <0 9 4>;
+            kcs_chan = <1>;
+            status = "disabled";
+        };
+
+        kcs2: kcs2@0 {
+            compatible = "nuvoton,npcm750-kcs-bmc";
+            reg = <0x0 0x40>;
+            interrupts = <0 9 4>;
+            kcs_chan = <2>;
+            status = "disabled";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml b/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
new file mode 100644
index 0000000000..02b662d780
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ssif-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SSIF IPMI BMC interface
+
+description: SSIF IPMI BMC device bindings
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+properties:
+  compatible:
+    enum:
+      - ssif-bmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssif-bmc@10 {
+            compatible = "ssif-bmc";
+            reg = <0x10>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/jailhouse.txt b/Documentation/devicetree/bindings/jailhouse.txt
new file mode 100644
index 0000000000..2901c25ff3
--- /dev/null
+++ b/Documentation/devicetree/bindings/jailhouse.txt
@@ -0,0 +1,8 @@
+Jailhouse non-root cell device tree bindings
+--------------------------------------------
+
+When running in a non-root Jailhouse cell (partition), the device tree of this
+platform shall have a top-level "hypervisor" node with the following
+properties:
+
+- compatible = "jailhouse,cell"
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
new file mode 100644
index 0000000000..4af2987b25
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
@@ -0,0 +1,85 @@
+Analog devices AS3645A device tree bindings
+
+The AS3645A flash LED controller can drive two LEDs, one high current
+flash LED and one indicator LED. The high current flash LED can be
+used in torch mode as well.
+
+Ranges below noted as [a, b] are closed ranges between a and b, i.e. a
+and b are included in the range.
+
+Please also see common.txt in the same directory.
+
+
+Required properties
+===================
+
+compatible	: Must be "ams,as3645a".
+reg		: The I2C address of the device. Typically 0x30.
+#address-cells	: 1
+#size-cells	: 0
+
+
+Required properties of the flash child node (0)
+===============================================
+
+reg: 0
+flash-timeout-us: Flash timeout in microseconds. The value must be in
+		  the range [100000, 850000] and divisible by 50000.
+flash-max-microamp: Maximum flash current in microamperes. Has to be
+		    in the range between [200000, 500000] and
+		    divisible by 20000.
+led-max-microamp: Maximum torch (assist) current in microamperes. The
+		  value must be in the range between [20000, 160000] and
+		  divisible by 20000.
+ams,input-max-microamp: Maximum flash controller input current. The
+			value must be in the range [1250000, 2000000]
+			and divisible by 50000.
+
+
+Optional properties of the flash child node
+===========================================
+
+function	:  See Documentation/devicetree/bindings/leds/common.txt.
+color		:  See Documentation/devicetree/bindings/leds/common.txt.
+label		:  See Documentation/devicetree/bindings/leds/common.txt (deprecated).
+
+
+Required properties of the indicator child node (1)
+===================================================
+
+reg: 1
+led-max-microamp: Maximum indicator current. The allowed values are
+		  2500, 5000, 7500 and 10000.
+
+Optional properties of the indicator child node
+===============================================
+
+function	:  See Documentation/devicetree/bindings/leds/common.txt.
+color		:  See Documentation/devicetree/bindings/leds/common.txt.
+label		:  See Documentation/devicetree/bindings/leds/common.txt (deprecated).
+
+
+Example
+=======
+
+#include <dt-bindings/leds/common.h>
+
+	as3645a@30 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x30>;
+		compatible = "ams,as3645a";
+		led@0 {
+			reg = <0x0>;
+			flash-timeout-us = <150000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <60000>;
+			ams,input-max-microamp = <1750000>;
+			function = LED_FUNCTION_FLASH;
+		};
+		led@1 {
+			reg = <0x1>;
+			led-max-microamp = <10000>;
+			function = LED_FUNCTION_INDICATOR;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
new file mode 100644
index 0000000000..feb5febaf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW200XX LED
+
+maintainers:
+  - Martin Kurbanov <mmkurbanov@sberdevices.ru>
+
+description: |
+  This controller is present on AW20036/AW20054/AW20072.
+  It is a 3x12/6x9/6x12 matrix LED programmed via
+  an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
+  3 pattern controllers for auto breathing or group dimming control.
+
+  For more product information please see the link below:
+  aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
+  aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
+  aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw20036
+      - awinic,aw20054
+      - awinic,aw20072
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  awinic,display-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Leds matrix size
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          LED number
+        maxItems: 1
+
+      led-max-microamp:
+        default: 9780
+        description: |
+          Note that a driver will take the minimum of all LED limits
+          since the chip has a single global setting.
+          The maximum output current of each LED is calculated by the
+          following formula:
+            IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
+          And the minimum output current formula:
+            IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - awinic,display-rows
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20036
+    then:
+      properties:
+        awinic,display-rows:
+          enum: [1, 2, 3]
+    else:
+      properties:
+        awinic,display-rows:
+          enum: [1, 2, 3, 4, 5, 6, 7]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3a {
+            compatible = "awinic,aw20036";
+            reg = <0x3a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            awinic,display-rows = <3>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                led-max-microamp = <9780>;
+            };
+
+            led@1 {
+                reg = <0x1>;
+                color = <LED_COLOR_ID_GREEN>;
+                led-max-microamp = <9780>;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_BLUE>;
+                led-max-microamp = <9780>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt
new file mode 100644
index 0000000000..261df27993
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt
@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - marvell,88pm860x-iset: Current supplies on backlight device.
+  - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+	backlights {
+		backlight-0 {
+			marvell,88pm860x-iset = <4>;
+			marvell,88pm860x-pwm = <3>;
+		};
+		backlight-2 {
+		};
diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
new file mode 100644
index 0000000000..230abdefd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
@@ -0,0 +1,33 @@
+Binding for ArcticSand arc2c0608 LED driver
+
+Required properties:
+- compatible:		should be "arc,arc2c0608"
+- reg:			slave address
+
+Optional properties:
+- default-brightness:	brightness value on boot, value from: 0-4095
+- label:		The name of the backlight device
+			See Documentation/devicetree/bindings/leds/common.txt
+- led-sources:		List of enabled channels from 0 to 5.
+			See Documentation/devicetree/bindings/leds/common.txt
+
+- arc,led-config-0:	setting for register ILED_CONFIG_0
+- arc,led-config-1:	setting for register ILED_CONFIG_1
+- arc,dim-freq:		PWM mode frequence setting (bits [3:0] used)
+- arc,comp-config:	setting for register CONFIG_COMP
+- arc,filter-config:	setting for register FILTER_CONFIG
+- arc,trim-config:	setting for register IMAXTUNE
+
+Note: Optional properties not specified will default to values in IC EPROM
+
+Example:
+
+arc2c0608@30 {
+	compatible = "arc,arc2c0608";
+	reg = <0x30>;
+	default-brightness = <500>;
+	label = "lcd-backlight";
+	linux,default-trigger = "backlight";
+	led-sources = <0 1 2 5>;
+};
+
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
new file mode 100644
index 0000000000..3b60afbab6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common backlight properties
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+  Backlight devices provide backlight for different types of graphical
+  displays. They are typically but not necessarily implemented using a white
+  LED powered by a boost converter.
+
+properties:
+  default-brightness:
+    description:
+      The default brightness that should be applied to the LED by the operating
+      system on start-up. The brightness should not exceed the brightness the
+      LED can provide.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  max-brightness:
+    description:
+      Normally the maximum brightness is determined by the hardware and this
+      property is not required. This property is used to put a software limit
+      on the brightness apart from what the driver says, as it could happen
+      that a LED can be made so bright that it gets damaged or causes damage
+      due to restrictions in a specific system, such as mounting conditions.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
new file mode 100644
index 0000000000..584030b6b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: gpio-backlight
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-backlight
+
+  gpios:
+    description: The gpio that is used for enabling/disabling the backlight.
+    maxItems: 1
+
+  default-on:
+    description: enable the backlight at boot.
+    type: boolean
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    backlight {
+        compatible = "gpio-backlight";
+        gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+        default-on;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
new file mode 100644
index 0000000000..73fa59e621
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD253 and KTD259 one-wire backlight
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Kinetic Technologies KTD253 and KTD259 are white LED backlights
+  controlled by a single GPIO line. If you just turn on the backlight
+  it goes to maximum backlight then you can set the level of backlight
+  using pulses on the enable wire. This is sometimes referred to as
+  "expresswire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - kinetic,ktd253
+          - kinetic,ktd259
+
+  enable-gpios:
+    description: GPIO to use to enable/disable and dim the backlight.
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    backlight {
+        compatible = "kinetic,ktd253";
+        enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+        default-brightness = <13>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 0000000000..c914e12769
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks
+  led backlight with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktz8866
+
+  reg:
+    maxItems: 1
+
+  vddpos-supply:
+    description: positive boost supply regulator.
+
+  vddneg-supply:
+    description: negative boost supply regulator.
+
+  enable-gpios:
+    description: GPIO to use to enable/disable the backlight (HWEN pin).
+    maxItems: 1
+
+  current-num-sinks:
+    description: number of the LED current sinks' channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4, 5, 6]
+
+  kinetic,current-ramp-delay-ms:
+    description: |
+      LED current ramping delay time in milliseconds, note that the
+      case 1 will be mapped to 1μs.
+    enum: [1, 2, 4, 8, 16, 32, 64, 128, 192, 256, 320, 384, 448, 512, 576, 640]
+
+  kinetic,led-enable-ramp-delay-ms:
+    description: |
+      LED on/off ramping delay time in milliseconds, note that the case 0 will be
+      mapped to 512μs because ktz8866 can't ramp faster than it.
+    enum: [0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384]
+
+  kinetic,enable-lcd-bias:
+    description: Set if we want to output bias power supply for LCD.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vddpos-supply
+  - vddneg-supply
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@11 {
+            compatible = "kinetic,ktz8866";
+            reg = <0x11>;
+            vddpos-supply = <&bl_vddpos_5p5>;
+            vddneg-supply = <&bl_vddneg_5p5>;
+            enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+            current-num-sinks = <5>;
+            kinetic,current-ramp-delay-ms = <128>;
+            kinetic,led-enable-ramp-delay-ms = <1>;
+            kinetic,enable-lcd-bias;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
new file mode 100644
index 0000000000..d7b78198ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: led-backlight
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+  This binding is used to describe a basic backlight device made of LEDs. It
+  can also be used to describe a backlight device controlled by the output of
+  a LED driver.
+
+properties:
+  compatible:
+    const: led-backlight
+
+  leds:
+    description: A list of LED nodes
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  brightness-levels:
+    description:
+      Array of distinct brightness levels. The levels must be in the range
+      accepted by the underlying LED devices. This is used to translate a
+      backlight brightness level into a LED brightness level. If it is not
+      provided, the identity mapping is used.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  default-brightness-level:
+    description:
+      The default brightness level (index into the array defined by the
+      "brightness-levels" property).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - leds
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "led-backlight";
+
+        leds = <&led1>, <&led2>;
+        brightness-levels = <0 4 8 16 32 64 128 255>;
+        default-brightness-level = <6>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
new file mode 100644
index 0000000000..3c9b4054ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3630A High-Efficiency Dual-String White LED
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+description: |
+  The LM3630A is a current-mode boost converter which supplies the power and
+  controls the current in up to two strings of 10 LEDs per string.
+  https://www.ti.com/product/LM3630A
+
+properties:
+  compatible:
+    const: ti,lm3630a
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO to use to enable/disable the backlight (HWEN pin).
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^led@[01]$":
+    type: object
+    description: |
+      Properties for a string of connected LEDs.
+
+    properties:
+      reg:
+        description: |
+          The control bank that is used to program the two current sinks. The
+          LM3630A has two control banks (A and B) and are represented as 0 or 1
+          in this property. The two current sinks can be controlled
+          independently with both banks, or bank A can be configured to control
+          both sinks with the led-sources property.
+        minimum: 0
+        maximum: 1
+
+      label:
+        maxItems: 1
+
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      default-brightness:
+        description: Default brightness level on boot.
+        minimum: 0
+        maximum: 255
+
+      max-brightness:
+        description: Maximum brightness that is allowed during runtime.
+        minimum: 0
+        maximum: 255
+
+      ti,linear-mapping-mode:
+        description: |
+          Enable linear mapping mode. If disabled, then it will use exponential
+          mapping mode in which the ramp up/down appears to have a more uniform
+          transition to the human eye.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+                compatible = "ti,lm3630a";
+                reg = <0x38>;
+                enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                        reg = <0>;
+                        led-sources = <0 1>;
+                        label = "lcd-backlight";
+                        default-brightness = <200>;
+                        max-brightness = <255>;
+                };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+                compatible = "ti,lm3630a";
+                reg = <0x38>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                        reg = <0>;
+                        default-brightness = <150>;
+                        ti,linear-mapping-mode;
+                };
+
+                led@1 {
+                        reg = <1>;
+                        default-brightness = <225>;
+                        ti,linear-mapping-mode;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
new file mode 100644
index 0000000000..9416e1bfab
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LP855X backlight controllers
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8550
+      - ti,lp8551
+      - ti,lp8552
+      - ti,lp8553
+      - ti,lp8555
+      - ti,lp8556
+      - ti,lp8557
+
+  reg:
+    maxItems: 1
+
+  dev-ctrl:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      Value of device control register. This is a device-specific value.
+
+  bl-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Backlight device name.
+
+  init-brt:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: Initial value of backlight brightness.
+
+  power-supply:
+    description: Regulator which controls the 3V rail.
+
+  enable-supply:
+    description: Regulator which controls the EN/VDDIO input.
+
+  pwms:
+    maxItems: 1
+    description: |
+      PWM channel to use for controlling the backlight; setting this
+      enables the PWM-based backlight control mode.
+
+  pwm-names: true
+
+  pwm-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      PWM period value. Deprecated; set the period value in the pwms
+      property instead.
+    deprecated: true
+
+patternProperties:
+  "^rom-[0-9a-f]{2}h$":
+    type: object
+    description: Nodes containing the values of configuration registers.
+    additionalProperties: false
+    properties:
+      rom-addr:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Register address of ROM area to be updated.
+
+      rom-val:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Value to write to the ROM register.
+
+required:
+  - compatible
+  - reg
+  - dev-ctrl
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8555";
+            reg = <0x2c>;
+
+            dev-ctrl = /bits/ 8 <0x00>;
+
+            pwms = <&pwm 0 10000>;
+            pwm-names = "lp8555";
+
+            /* 4V OV, 4 output LED0 string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+
+            /* Heavy smoothing, 24ms ramp time step */
+            rom-15h {
+              rom-addr = /bits/ 8 <0x15>;
+              rom-val = /bits/ 8 <0xc7>;
+            };
+
+            /* 4 output LED1 string enabled */
+            rom-19h {
+              rom-addr = /bits/ 8 <0x19>;
+              rom-val = /bits/ 8 <0x0f>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8556";
+            reg = <0x2c>;
+
+            bl-name = "lcd-bl";
+            dev-ctrl = /bits/ 8 <0x85>;
+            init-brt = /bits/ 8 <0x10>;
+        };
+      };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8557";
+            reg = <0x2c>;
+            enable-supply = <&backlight_vddio>;
+            power-supply = <&backlight_vdd>;
+
+            dev-ctrl = /bits/ 8 <0x41>;
+            init-brt = /bits/ 8 <0x0a>;
+
+            /* 4V OV, 4 output LED string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt
new file mode 100644
index 0000000000..b4cffdaa41
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt
@@ -0,0 +1,10 @@
+88pm860x-backlight bindings
+
+Optional properties:
+  - maxim,max8925-dual-string: whether support dual string
+
+Example:
+
+	backlights {
+		maxim,max8925-dual-string = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 0000000000..16fc98e712
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits, only for MT6370/MT6371) or
+  16384 current steps (14 bits, only for MT6372) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-backlight
+      - mediatek,mt6372-backlight
+
+  default-brightness:
+    minimum: 0
+
+  max-brightness:
+    minimum: 0
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs more than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggered.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-exponential-mode-enable:
+    description: |
+      Enable the exponential mode of backlight brightness. If this property
+      is not enabled, the default is to use linear mode.
+    type: boolean
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt6372-backlight
+
+then:
+  properties:
+    default-brightness:
+      maximum: 16384
+
+    max-brightness:
+      maximum: 16384
+
+else:
+  properties:
+    default-brightness:
+      maximum: 2048
+
+    max-brightness:
+      maximum: 2048
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
new file mode 100644
index 0000000000..5356902889
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: pwm-backlight
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+  - Daniel Thompson <daniel.thompson@linaro.org>
+  - Jingoo Han <jingoohan1@gmail.com>
+
+properties:
+  compatible:
+    const: pwm-backlight
+
+  pwms:
+    maxItems: 1
+
+  pwm-names: true
+
+  power-supply:
+    description: regulator for supply voltage
+
+  enable-gpios:
+    description:
+      Contains a single GPIO specifier for the GPIO which enables and disables
+      the backlight.
+    maxItems: 1
+
+  post-pwm-on-delay-ms:
+    description:
+      Delay in ms between setting an initial (non-zero) PWM and enabling the
+      backlight using GPIO.
+
+  pwm-off-delay-ms:
+    description:
+      Delay in ms between disabling the backlight using GPIO and setting PWM
+      value to 0.
+
+  brightness-levels:
+    description:
+      Array of distinct brightness levels. Typically these are in the range
+      from 0 to 255, but any range starting at 0 will do. The actual brightness
+      level (PWM duty cycle) will be interpolated from these values. 0 means a
+      0% duty cycle (darkest/off), while the last value in the array represents
+      a 100% duty cycle (brightest).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  default-brightness-level:
+    description:
+      The default brightness level (index into the array defined by the
+      "brightness-levels" property).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  num-interpolated-steps:
+    description:
+      Number of interpolated steps between each value of brightness-levels
+      table. This way a high resolution pwm duty cycle can be used without
+      having to list out every possible value in the brightness-level array.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+  default-brightness-level: [brightness-levels]
+  num-interpolated-steps: [brightness-levels]
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "pwm-backlight";
+        pwms = <&pwm 0 5000000>;
+
+        brightness-levels = <0 4 8 16 32 64 128 255>;
+        default-brightness-level = <6>;
+
+        power-supply = <&vdd_bl_reg>;
+        enable-gpios = <&gpio 58 0>;
+        post-pwm-on-delay-ms = <10>;
+        pwm-off-delay-ms = <10>;
+    };
+
+  - |
+    // Example using num-interpolation-steps:
+    backlight {
+        compatible = "pwm-backlight";
+        pwms = <&pwm 0 5000000>;
+
+        brightness-levels = <0 2048 4096 8192 16384 65535>;
+        num-interpolated-steps = <2048>;
+        default-brightness-level = <4096>;
+
+        power-supply = <&vdd_bl_reg>;
+        enable-gpios = <&gpio 58 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
new file mode 100644
index 0000000000..5f1849bdab
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. WLED driver
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Kiran Gunda <kgunda@codeaurora.org>
+
+description: |
+  WLED (White Light Emitting Diode) driver is used for controlling display
+  backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
+  platforms. The PMIC is connected to the host processor via SPMI bus.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8941-wled
+      - qcom,pmi8950-wled
+      - qcom,pmi8994-wled
+      - qcom,pmi8998-wled
+      - qcom,pm660l-wled
+      - qcom,pm6150l-wled
+      - qcom,pm8150l-wled
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  default-brightness:
+    description: |
+      brightness value on boot.
+
+  label: true
+
+  max-brightness:
+    description: |
+      Maximum brightness level.
+
+  qcom,cs-out:
+    description: |
+      enable current sink output.
+      This property is supported only for WLED3.
+    type: boolean
+
+  qcom,cabc:
+    description: |
+      enable content adaptive backlight control.
+    type: boolean
+
+  qcom,ext-gen:
+    description: |
+      use externally generated modulator signal to dim.
+      This property is supported only for WLED3.
+    type: boolean
+
+  qcom,current-limit:
+    description: |
+      mA; per-string current limit.
+      This property is supported only for WLED3.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+    minimum: 0
+    maximum: 25
+
+  qcom,current-limit-microamp:
+    description: |
+      uA; per-string current limit.
+    default: 25
+    minimum: 0
+    maximum: 30000
+    multipleOf: 25
+
+  qcom,current-boost-limit:
+    description: |
+      mA; boost current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,switching-freq:
+    description: |
+      kHz; switching frequency.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
+            2400, 3200, 4800, 9600 ]
+
+  qcom,ovp:
+    description: |
+      V; Over-voltage protection limit.
+      This property is supported only for WLED3.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 27, 29, 32, 35 ]
+    default: 29
+
+  qcom,ovp-millivolt:
+    description: |
+      Over-voltage protection limit. This property is for WLED4 only.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 18100, 19600, 29600, 31100 ]
+    default: 29600
+
+  qcom,num-strings:
+    description: |
+      number of led strings attached.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,enabled-strings:
+    description: |
+      Array of the WLED strings numbered from 0 to 3. Each
+      string of leds are operated individually. Specify the
+      list of strings used by the device. Any combination of
+      led strings can be used.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+
+  qcom,external-pfet:
+    description: |
+      Specify if external PFET control for short circuit
+      protection is used. This property is supported only
+      for WLED4.
+    type: boolean
+
+  qcom,auto-string-detection:
+    description: |
+      Enables auto-detection of the WLED string configuration.
+      This feature is not supported for WLED3.
+    type: boolean
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: over voltage protection interrupt.
+      - description: short circuit interrupt.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ovp
+      - const: short
+
+  qcom,modulator-sel:
+    description: |
+      Selects the modulator used for brightness modulation.
+      Allowed values are,
+           0 - Modulator A
+           1 - Modulator B
+      This property is applicable only to WLED5 peripheral.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0
+
+  qcom,cabc-sel:
+    description: |
+      Selects the CABC pin signal used for brightness modulation.
+      Allowed values are,
+           0 - CABC disabled
+           1 - CABC 1
+           2 - CABC 2
+           3 - External signal (e.g. LPG) is used for dimming
+      This property is applicable only to WLED5 peripheral.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-wled
+
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+        qcom,current-boost-limit:
+          enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
+          default: 805
+
+        qcom,switching-freq:
+          default: 1600
+
+        qcom,num-strings:
+          enum: [ 1, 2, 3 ]
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names:
+          maxItems: 1
+
+    else:
+      properties:
+        reg:
+          minItems: 2
+
+        qcom,current-boost-limit:
+          enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
+          default: 970
+
+        qcom,switching-freq:
+          default: 800
+
+        qcom,num-strings:
+          enum: [ 1, 2, 3, 4 ]
+
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8150l-wled
+
+    then:
+      properties:
+        default-brightness:
+          minimum: 0
+          maximum: 32767
+
+        max-brightness:
+          minimum: 0
+          maximum: 32767
+
+    else:
+      properties:
+        default-brightness:
+          minimum: 0
+          maximum: 4095
+
+        max-brightness:
+          minimum: 0
+          maximum: 4095
+
+required:
+  - compatible
+  - reg
+  - label
+
+additionalProperties: false
+
+examples:
+  - |
+    backlight@d800 {
+        compatible = "qcom,pm8941-wled";
+        reg = <0xd800 0x100>;
+        label = "backlight";
+
+        qcom,cs-out;
+        qcom,current-limit = <20>;
+        qcom,current-boost-limit = <805>;
+        qcom,switching-freq = <1600>;
+        qcom,ovp = <29>;
+        qcom,num-strings = <2>;
+        qcom,enabled-strings = <0 1>;
+     };
diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
new file mode 100644
index 0000000000..99e9e138fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 Backlight
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a mutifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For the LCD backlight, it can provide four channel WLED driving capability.
+  Each channel driving current is up to 30mA
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt4831-backlight
+
+  default-brightness:
+    minimum: 0
+    maximum: 2048
+
+  max-brightness:
+    minimum: 0
+    maximum: 2048
+
+  richtek,pwm-enable:
+    description: |
+      Specify the backlight dimming following by PWM duty or by SW control.
+    type: boolean
+
+  richtek,bled-ovp-sel:
+    description: |
+      Backlight OVP level selection, currently support 17V/21V/25V/29V.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 1
+    minimum: 0
+    maximum: 3
+
+  richtek,bled-ocp-microamp:
+    description: |
+      Backlight over current protection level.
+    enum: [900000, 1200000, 1500000, 1800000]
+
+  richtek,channel-use:
+    description: |
+      Backlight LED channel to be used.
+      BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - richtek,channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt
new file mode 100644
index 0000000000..8bf2940f54
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt
@@ -0,0 +1,29 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible		: Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name			: Name of backlight device. Default is 'lcd-backlight'.
+- gpios			: GPIO to use to EN pin.
+			See Documentation/devicetree/bindings/gpio/gpio.txt
+- led-sources		: List of enabled channels from 0 to 5.
+			See Documentation/devicetree/bindings/leds/common.txt
+- skyworks,ignore-pwm	: Ignore both PWM input
+- skyworks,dpwm-mode	: Enable DPWM dimming mode, otherwise Analog dimming.
+- skyworks,phase-shift	: Enable phase shift mode
+- skyworks,short-detection-threshold-volt
+			: It should be one of 4, 5, 6 and 7V.
+- skyworks,current-limit-mA
+			: It should be 2300mA or 2750mA.
+
+Example:
+
+	backlight {
+		compatible = "skyworks,sky81452-backlight";
+		name = "pwm-backlight";
+		led-sources = <0 1 2 5>;
+		skyworks,ignore-pwm;
+		skyworks,phase-shift;
+		skyworks,current-limit-mA = <2300>;
+	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
new file mode 100644
index 0000000000..5fb9279ac2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
@@ -0,0 +1,27 @@
+TPS65217 family of regulators
+
+The TPS65217 chip contains a boost converter and current sinks which can be
+used to drive LEDs for use as backlights.
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- backlight: node for specifying WLED1 and WLED2 lines in TPS65217
+- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
+- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
+- default-brightness: valid values: 0-100
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps: tps@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+		backlight {
+			isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+			fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+			default-brightness = <50>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
new file mode 100644
index 0000000000..ff5c921386
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
@@ -0,0 +1,23 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings
+
+RAVE SP backlight device is a "MFD cell" device corresponding to
+backlight functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Should be "zii,rave-sp-backlight"
+
+Example:
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+	}
+
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
new file mode 100644
index 0000000000..26d770ef36
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -0,0 +1 @@
+This file has moved to ./common.yaml.
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
new file mode 100644
index 0000000000..5fb7007f36
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds properties
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  LED and flash LED devices provide the same basic functionality as current
+  regulators, but extended with LED and flash LED specific features like
+  blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+  Many LED devices expose more than one current output that can be connected
+  to one or more discrete LED component. Since the arrangement of connections
+  can influence the way of the LED device initialization, the LED components
+  have to be tightly coupled with the LED device binding. They are represented
+  by child nodes of the parent LED device binding.
+
+properties:
+  led-sources:
+    description:
+      List of device current outputs the LED is connected to. The outputs are
+      identified by the numbers that must be defined in the LED device binding
+      documentation.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  function:
+    description:
+      LED function. Use one of the LED_FUNCTION_* prefixed definitions
+      from the header include/dt-bindings/leds/common.h. If there is no
+      matching LED_FUNCTION available, add a new one.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  color:
+    description:
+      Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
+      the header include/dt-bindings/leds/common.h. If there is no matching
+      LED_COLOR_ID available, add a new one.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 9
+
+  function-enumerator:
+    description:
+      Integer to be used when more than one instance of the same function is
+      needed, differing only with an ordinal number.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  label:
+    description:
+      The label for this LED. If omitted, the label is taken from the node name
+      (excluding the unit address). It has to uniquely identify a device, i.e.
+      no other LED class device can be assigned the same label. This property is
+      deprecated - use 'function' and 'color' properties instead.
+      function-enumerator has no effect when this property is present.
+
+  default-state:
+    description:
+      The initial state of the LED. If the LED is already on or off and the
+      default-state property is set the to same value, then no glitch should be
+      produced where the LED momentarily turns off (or on). The "keep" setting
+      will keep the LED at whatever its current state is, without producing a
+      glitch.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - on
+      - off
+      - keep
+    default: off
+
+  linux,default-trigger:
+    description:
+      This parameter, if present, is a string defining the trigger assigned to
+      the LED.
+    $ref: /schemas/types.yaml#/definitions/string
+
+    oneOf:
+      - enum:
+            # LED will act as a back-light, controlled by the framebuffer system
+          - backlight
+            # LED will turn on (see also "default-state" property)
+          - default-on
+            # LED "double" flashes at a load average based rate
+          - heartbeat
+            # LED indicates disk activity
+          - disk-activity
+            # LED indicates disk read activity
+          - disk-read
+            # LED indicates disk write activity
+          - disk-write
+            # LED flashes at a fixed, configurable rate
+          - timer
+            # LED alters the brightness for the specified duration with one software
+            # timer (requires "led-pattern" property)
+          - pattern
+            # LED indicates mic mute state
+          - audio-micmute
+            # LED indicates audio mute state
+          - audio-mute
+            # LED indicates bluetooth power state
+          - bluetooth-power
+            # LED indicates camera flash state
+          - flash
+            # LED indicated keyboard capslock
+          - kbd-capslock
+            # LED indicates MTD memory activity
+          - mtd
+            # LED indicates NAND memory activity (deprecated),
+            # in new implementations use "mtd"
+          - nand-disk
+            # No trigger assigned to the LED. This is the default mode
+            # if trigger is absent
+          - none
+            # LED indicates camera torch state
+          - torch
+            # LED indicates USB gadget activity
+          - usb-gadget
+            # LED indicates USB host activity
+          - usb-host
+            # LED indicates USB port state
+          - usbport
+        # LED is triggered by CPU activity
+      - pattern: "^cpu[0-9]*$"
+        # LED is triggered by Bluetooth activity
+      - pattern: "^hci[0-9]+-power$"
+        # LED is triggered by SD/MMC activity
+      - pattern: "^mmc[0-9]+$"
+        # LED is triggered by WLAN activity
+      - pattern: "^phy[0-9]+tx$"
+
+  led-pattern:
+    description: |
+      Array of integers with default pattern for certain triggers.
+
+      Each trigger may parse this property differently:
+        - one-shot : two numbers specifying delay on and delay off (in ms),
+        - timer : two numbers specifying delay on and delay off (in ms),
+        - pattern : the pattern is given by a series of tuples, of
+          brightness and duration (in ms).  The exact format is
+          described in:
+          Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  led-max-microamp:
+    description:
+      Maximum LED supply current in microamperes. This property can be made
+      mandatory for the board configurations introducing a risk of hardware
+      damage in case an excessive current is set.
+      For flash LED controllers with configurable current this property is
+      mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
+
+  max-brightness:
+    description:
+      Normally, the maximum brightness is determined by the hardware, and this
+      property is not required. This property is used to set a software limit.
+      It could happen that an LED is made so bright that it gets damaged or
+      causes damage due to restrictions in a specific system, such as mounting
+      conditions.
+      Note that this flag is mainly used for PWM-LEDs, where it is not possible
+      to map brightness to current. Drivers for other controllers should use
+      led-max-microamp.
+    $ref: /schemas/types.yaml#definitions/uint32
+
+  panic-indicator:
+    description:
+      This property specifies that the LED should be used, if at all possible,
+      as a panic indicator.
+    type: boolean
+
+  retain-state-shutdown:
+    description:
+      This property specifies that the LED should not be turned off or changed
+      when the system shuts down.
+    type: boolean
+
+  trigger-sources:
+    description: |
+      List of devices which should be used as a source triggering this LED
+      activity. Some LEDs can be related to a specific device and should somehow
+      indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0
+      port(s).
+      Another common example is switch or router with multiple Ethernet ports
+      each of them having its own LED assigned (assuming they are not
+      hardwired). In such cases this property should contain phandle(s) of
+      related source device(s).
+      In many cases LED can be related to more than one device (e.g. one USB LED
+      vs. multiple USB ports). Each source should be represented by a node in
+      the device tree and be referenced by a phandle and a set of phandle
+      arguments. A length of arguments should be specified by the
+      #trigger-source-cells property in the source node.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  # Required properties for flash LED child nodes:
+  flash-max-microamp:
+    description:
+      Maximum flash LED supply current in microamperes. Required for flash LED
+      nodes with configurable current.
+
+  flash-max-timeout-us:
+    description:
+      Maximum timeout in microseconds after which the flash LED is turned off.
+      Required for flash LED nodes with configurable timeout.
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "gpio-leds";
+
+        led-0 {
+            function = LED_FUNCTION_STATUS;
+            linux,default-trigger = "heartbeat";
+            gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+        };
+
+        led-1 {
+            function = LED_FUNCTION_USB;
+            gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+            trigger-sources = <&ohci_port1>, <&ehci_port1>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "maxim,max77693-led";
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-sources = <0>, <1>;
+            led-max-microamp = <50000>;
+            flash-max-microamp = <320000>;
+            flash-max-timeout-us = <500000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "panasonic,an30259a";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                linux,default-trigger = "heartbeat";
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <1>;
+            };
+
+            led@2 {
+                reg = <2>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <2>;
+            };
+
+            led@3 {
+                reg = <3>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <3>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
new file mode 100644
index 0000000000..34ef5215c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia LEDs driver
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description:
+  This module adds support for the RGB LEDs found on the front panel of the
+  Turris Omnia router. There are 12 RGB LEDs that are controlled by a
+  microcontroller that communicates via the I2C bus. Each LED is described
+  as a subnode of this I2C device.
+
+properties:
+  compatible:
+    const: cznic,turris-omnia-leds
+
+  reg:
+    description: I2C slave address of the microcontroller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-9a-b]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    description:
+      This node represents one of the RGB LED devices on Turris Omnia.
+      No subnodes need to be added for subchannels since this controller only
+      supports RGB LEDs.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 11
+        description:
+          This property identifies one of the LEDs on the front panel of the
+          Turris Omnia router.
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@2b {
+            compatible = "cznic,turris-omnia-leds";
+            reg = <0x2b>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            multi-led@0 {
+                /*
+                 * No subnodes are needed, this controller only supports RGB
+                 * LEDs.
+                 */
+                reg = <0>;
+                color = <LED_COLOR_ID_MULTI>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "heartbeat";
+            };
+
+            multi-led@a {
+                reg = <0xa>;
+                color = <LED_COLOR_ID_MULTI>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
new file mode 100644
index 0000000000..5839d00c70
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/gpio-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through GPIO pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through GPIO pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: gpio-ir-tx
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    irled {
+        compatible = "gpio-ir-tx";
+        gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
new file mode 100644
index 0000000000..72cadebf6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/ir-spi-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through SPI bus
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED switch is connected to the MOSI line of the SPI device and the data
+  is delivered through that.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: ir-spi-led
+
+  reg:
+    maxItems: 1
+
+  duty-cycle:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [50, 60, 70, 75, 80, 90]
+    description:
+      Percentage of one period in which the signal is active.
+
+  led-active-low:
+    type: boolean
+    description:
+      Output is negated with a NOT gate.
+
+  power-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        irled@0 {
+            compatible = "ir-spi-led";
+            reg = <0x0>;
+
+            duty-cycle = /bits/ 8 <60>;
+            led-active-low;
+            power-supply = <&irda_regulator>;
+            spi-max-frequency = <5000000>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
new file mode 100644
index 0000000000..f2a6fa140f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/pwm-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through PWM pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through PWM pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: pwm-ir-tx
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    irled {
+        compatible = "pwm-ir-tx";
+        pwms = <&pwm0 0 10000000>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
new file mode 100644
index 0000000000..3c0431c511
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ISSI LED Controllers for IS31FL319{0,1,3,6,9}
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description: |
+  The IS31FL319X are LED controllers with I2C interface.
+  Previously known as Si-En SN319{0,1,3,6,9}.
+
+  For more product information please see the links below:
+    https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3190
+      - issi,is31fl3191
+      - issi,is31fl3193
+      - issi,is31fl3196
+      - issi,is31fl3199
+      - si-en,sn3190
+      - si-en,sn3191
+      - si-en,sn3193
+      - si-en,sn3196
+      - si-en,sn3199
+
+  reg:
+    maxItems: 1
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO attached to the SDB pin.
+
+  audio-gain-db:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Audio gain selection for external analog modulation input.
+    enum: [0, 3, 6, 9, 12, 15, 18, 21]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-9]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 1
+        maximum: 9
+
+      led-max-microamp:
+        description:
+          Note that a driver will take the lowest of all LED limits
+          since the chip has a single global setting. The lowest value
+          will be chosen due to the PWM specificity, where lower
+          brightness is achieved by reducing the duty-cycle of pulses
+          and not the current, which will always have its peak value
+          equal to led-max-microamp.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - issi,is31fl3193
+              - si-en,sn3190
+              - si-en,sn3191
+              - si-en,sn3193
+    then:
+      properties:
+        reg:
+          enum: [0x68, 0x69, 0x6a, 0x6b]
+
+        audio-gain-db: false
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 42000
+              enum: [5000, 10000, 17500, 30000, 42000]
+    else:
+      properties:
+        reg:
+          enum: [0x64, 0x65, 0x66, 0x67]
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 20000
+              enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - si-en,sn3190
+              - si-en,sn3191
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3193
+              - si-en,sn3193
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3196
+              - si-en,sn3196
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 6
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@65 {
+            compatible = "issi,is31fl3196";
+            reg = <0x65>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+            led@1 {
+                reg = <1>;
+                label = "red:aux";
+                led-max-microamp = <10000>;
+            };
+
+            led@5 {
+                reg = <5>;
+                label = "green:power";
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 0000000000..bac95a51af
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  KTD2692 is the ideal power solution for high-power flash LEDs.
+  It uses ExpressWire single-wire programming for maximum flexibility.
+
+  The ExpressWire interface through CTRL pin can control LED on/off and
+  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+  Flash timeout, LVP(low voltage protection).
+
+  Also, When the AUX pin is pulled high while CTRL pin is high,
+  LED current will be ramped up to the flash-mode current level.
+
+properties:
+  compatible:
+    const: kinetic,ktd2692
+
+  ctrl-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  aux-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  vin-supply:
+    description: LED supply (2.7V to 5.5V).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    description: Properties for the LED.
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us:
+        description: Flash LED maximum timeout.
+
+      led-max-microamp:
+        maximum: 300000
+        description: Minimum Threshold for Timer protection
+          is defined internally (Maximum 300mA).
+
+      flash-max-microamp:
+        maximum: 300000
+        description: Flash LED maximum current
+          Formula - I(uA) = 15000000 / Rset.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ctrl-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    ktd2692 {
+      compatible = "kinetic,ktd2692";
+      ctrl-gpios = <&gpc0 1 0>;
+      aux-gpios = <&gpc0 2 0>;
+      vin-supply = <&vbat>;
+
+      led {
+        function = LED_FUNCTION_FLASH;
+        color = <LED_COLOR_ID_WHITE>;
+        flash-max-timeout-us = <250000>;
+        flash-max-microamp = <150000>;
+        led-max-microamp = <25000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
new file mode 100644
index 0000000000..26238446f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW2013 3-channel LED Driver
+
+maintainers:
+  - Nikita Travkin <nikitos.tr@gmail.com>
+
+description: |
+  The AW2013 is a 3-channel LED driver with I2C interface. It can control
+  LED brightness with PWM output.
+
+properties:
+  compatible:
+    const: awinic,aw2013
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Open-drain, low active interrupt pin "INTN".
+      Used to report completion of operations (power up, LED breath effects).
+
+  vcc-supply:
+    description: Regulator providing power to the "VCC" pin.
+
+  vio-supply:
+    description: Regulator providing power for pull-up of the I/O lines.
+      "VIO1" in the typical application circuit example of the datasheet.
+      Note that this regulator does not directly connect to AW2013, but is
+      needed for the correct operation of the interrupt and I2C lines.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-2]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 0
+        maximum: 2
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@45 {
+            compatible = "awinic,aw2013";
+            reg = <0x45>;
+            interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vcc-supply = <&pm8916_l17>;
+
+            led@0 {
+                reg = <0>;
+                led-max-microamp = <5000>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led@1 {
+                reg = <1>;
+                led-max-microamp = <5000>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led@2 {
+                reg = <2>;
+                led-max-microamp = <5000>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
new file mode 100644
index 0000000000..52252fb6bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's BCM63138 LEDs controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  This LEDs controller was first used on BCM63138 and later reused on BCM4908,
+  BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
+
+  It supports up to 32 LEDs that can be connected parallelly or serially. It
+  also includes limited support for hardware blinking.
+
+  Binding serially connected LEDs isn't documented yet.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm4908-leds
+              - brcm,bcm6848-leds
+              - brcm,bcm6858-leds
+              - brcm,bcm63148-leds
+              - brcm,bcm63381-leds
+              - brcm,bcm68360-leds
+          - const: brcm,bcm63138-leds
+      - const: brcm,bcm63138-leds
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+        description: LED pin number
+
+      active-low:
+        type: boolean
+        description: Makes LED active low
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    leds@ff800800 {
+        compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+        reg = <0xff800800 0xdc>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0x0>;
+            function = LED_FUNCTION_POWER;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+
+        led@3 {
+            reg = <0x3>;
+            function = LED_FUNCTION_STATUS;
+            color = <LED_COLOR_ID_GREEN>;
+            active-low;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
new file mode 100644
index 0000000000..51cc0d82c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -0,0 +1,404 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6328 controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+  In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+  However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+  controller), which can either be controlled by software (exporting the 74x164
+  as spi-gpio. See
+  Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware
+  using this driver.
+  Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+  exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+  controlled, so the only chance to keep them working is by using this driver.
+
+  BCM6328 LED controller has a HWDIS register, which controls whether a LED
+  should be controlled by a hardware signal instead of the MODE register value,
+  with 0 meaning hardware control enabled and 1 hardware control disabled. This
+  is usually 1:1 for hardware to LED signals, but through the activity/link
+  registers you have some limited control over rerouting the LEDs (as
+  explained later in brcm,link-signal-sources). Even if a LED is hardware
+  controlled you are still able to make it blink or light it up if it isn't,
+  but you can't turn it off if the hardware decides to light it up. For this
+  reason, hardware controlled LEDs aren't registered as LED class devices.
+
+  Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-leds
+
+  reg:
+    maxItems: 1
+
+  brcm,serial-leds:
+    type: boolean
+    description: Enables Serial LEDs.
+
+  brcm,serial-mux:
+    type: boolean
+    description: Enables Serial LEDs multiplexing.
+
+  brcm,serial-clk-low:
+    type: boolean
+    description: Makes clock signal active low.
+
+  brcm,serial-dat-low:
+    type: boolean
+    description: Makes data signal active low.
+
+  brcm,serial-shift-inv:
+    type: boolean
+    description: Inverts Serial LEDs shift direction.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        items:
+          - maximum: 23
+        description: LED pin number (only LEDs 0 to 23 are valid).
+
+      active-low:
+        type: boolean
+        description: Makes LED active low.
+
+      brcm,hardware-controlled:
+        type: boolean
+        description: Makes this LED hardware controlled.
+
+      brcm,link-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware link signal sources. Up to four link hardware
+          signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
+          where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
+          7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
+          LED, and one LED can have more than one source signal.
+
+      brcm,activity-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware activity signal sources. Up to four activity
+          hardware signals can get muxed into these LEDs. Only valid for LEDs 0
+          to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
+          signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
+          more than one LED, and one LED can have more than one source signal.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* BCM6328 with 4 EPHY LEDs */
+    led-controller@10000800 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10000800 0x24>;
+
+        alarm_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:alarm";
+        };
+
+        inet_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:inet";
+        };
+
+        power_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+
+        ephy0_spd@17 {
+            reg = <17>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@18 {
+            reg = <18>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@19 {
+            reg = <19>;
+            brcm,hardware-controlled;
+        };
+
+        ephy3_spd@20 {
+            reg = <20>;
+            brcm,hardware-controlled;
+        };
+    };
+  - |
+    /* BCM63268 with Serial/GPHY0 LEDs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+        brcm,serial-leds;
+        brcm,serial-dat-low;
+        brcm,serial-shift-inv;
+
+        gphy0_spd0@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+        };
+
+        gphy0_spd1@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <1>;
+        };
+
+        inet_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:inet";
+        };
+
+        dsl_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:dsl";
+        };
+
+        usb_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:usb";
+        };
+
+        wps_green@7 {
+            reg = <7>;
+            active-low;
+            label = "green:wps";
+        };
+
+        inet_green@8 {
+            reg = <8>;
+            active-low;
+            label = "green:inet";
+        };
+
+        ephy0_act@9 {
+            reg = <9>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_act@10 {
+            reg = <10>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_act@11 {
+            reg = <11>;
+            brcm,hardware-controlled;
+        };
+
+        gphy0_act@12 {
+            reg = <12>;
+            brcm,hardware-controlled;
+        };
+
+        ephy0_spd@13 {
+            reg = <13>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@14 {
+            reg = <14>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@15 {
+            reg = <15>;
+            brcm,hardware-controlled;
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for each EPHY */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0>;
+            /* USB link/activity routed to USB LED */
+        };
+
+        inet@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,activity-signal-sources = <1>;
+            /* INET activity routed to INET LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for all EPHYs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0 1>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB/INET link/activity routed to USB LED */
+        };
+
+        ephy@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4 5 6 7>;
+            /* EPHY0/1/2/3 link routed to EPHY0 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with EPHY LEDs swapped */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB link/act and INET act routed to USB LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
new file mode 100644
index 0000000000..6e51c6b91e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -0,0 +1,145 @@
+LEDs connected to Broadcom BCM6358 controller
+
+This controller is present on BCM6358 and BCM6368.
+In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
+which can either be controlled by software (exporting the 74x164 as spi-gpio.
+See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or
+by hardware using this driver.
+
+Required properties:
+  - compatible : should be "brcm,bcm6358-leds".
+  - #address-cells : must be 1.
+  - #size-cells : must be 0.
+  - reg : BCM6358 LED controller address and size.
+
+Optional properties:
+  - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
+    Default : 1
+  - brcm,clk-dat-low : Boolean, makes clock and data signals active low.
+    Default : false
+
+Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
+
+LED sub-node required properties:
+  - reg : LED pin number (only LEDs 0 to 31 are valid).
+
+LED sub-node optional properties:
+  - label : see Documentation/devicetree/bindings/leds/common.txt
+  - active-low : Boolean, makes LED active low.
+    Default : false
+  - default-state : see
+    Documentation/devicetree/bindings/leds/common.txt
+  - linux,default-trigger : see
+    Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+Scenario 1 : BCM6358
+	leds0: led-controller@fffe00d0 {
+		compatible = "brcm,bcm6358-leds";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xfffe00d0 0x8>;
+
+		alarm_white {
+			reg = <0>;
+			active-low;
+			label = "white:alarm";
+		};
+		tv_white {
+			reg = <2>;
+			active-low;
+			label = "white:tv";
+		};
+		tel_white {
+			reg = <3>;
+			active-low;
+			label = "white:tel";
+		};
+		adsl_white {
+			reg = <4>;
+			active-low;
+			label = "white:adsl";
+		};
+	};
+
+Scenario 2 : BCM6368
+	leds0: led-controller@100000d0 {
+		compatible = "brcm,bcm6358-leds";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x100000d0 0x8>;
+		brcm,pol-low;
+		brcm,clk-div = <4>;
+
+		power_red {
+			reg = <0>;
+			active-low;
+			label = "red:power";
+		};
+		power_green {
+			reg = <1>;
+			active-low;
+			label = "green:power";
+			default-state = "on";
+		};
+		power_blue {
+			reg = <2>;
+			label = "blue:power";
+		};
+		broadband_red {
+			reg = <3>;
+			active-low;
+			label = "red:broadband";
+		};
+		broadband_green {
+			reg = <4>;
+			label = "green:broadband";
+		};
+		broadband_blue {
+			reg = <5>;
+			active-low;
+			label = "blue:broadband";
+		};
+		wireless_red {
+			reg = <6>;
+			active-low;
+			label = "red:wireless";
+		};
+		wireless_green {
+			reg = <7>;
+			active-low;
+			label = "green:wireless";
+		};
+		wireless_blue {
+			reg = <8>;
+			label = "blue:wireless";
+		};
+		phone_red {
+			reg = <9>;
+			active-low;
+			label = "red:phone";
+		};
+		phone_green {
+			reg = <10>;
+			active-low;
+			label = "green:phone";
+		};
+		phone_blue {
+			reg = <11>;
+			label = "blue:phone";
+		};
+		upgrading_red {
+			reg = <12>;
+			active-low;
+			label = "red:upgrading";
+		};
+		upgrading_green {
+			reg = <13>;
+			active-low;
+			label = "green:upgrading";
+		};
+		upgrading_blue {
+			reg = <14>;
+			label = "blue:upgrading";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
new file mode 100644
index 0000000000..e850a88947
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-class-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for the multicolor LED class.
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  Bindings for multi color LEDs show how to describe current outputs of
+  either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
+  etc.) or standalone LEDs, to achieve logically grouped multi-color LED
+  modules. This is achieved by adding multi-led nodes layer to the
+  monochrome LED bindings.
+  The nodes and properties defined in this document are unique to the multicolor
+  LED class.  Common LED nodes and properties are inherited from the common.yaml
+  within this documentation directory.
+
+properties:
+  $nodename:
+    pattern: "^multi-led(@[0-9a-f])?$"
+
+  color:
+    description: |
+      For multicolor LED support this property should be defined as either
+      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+      include/linux/leds/common.h.
+    enum: [ 8, 9 ]
+
+required:
+  - color
+
+allOf:
+  - $ref: common.yaml#
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-cpcap.txt b/Documentation/devicetree/bindings/leds/leds-cpcap.txt
new file mode 100644
index 0000000000..ebf7cdc7f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-cpcap.txt
@@ -0,0 +1,29 @@
+Motorola CPCAP PMIC LEDs
+------------------------
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+Requires node properties:
+- compatible: should be one of
+   * "motorola,cpcap-led-mdl"		(Main Display Lighting)
+   * "motorola,cpcap-led-kl"		(Keyboard Lighting)
+   * "motorola,cpcap-led-adl"		(Aux Display Lighting)
+   * "motorola,cpcap-led-red"		(Red Triode)
+   * "motorola,cpcap-led-green"		(Green Triode)
+   * "motorola,cpcap-led-blue"		(Blue Triode)
+   * "motorola,cpcap-led-cf"		(Camera Flash)
+   * "motorola,cpcap-led-bt"		(Bluetooth)
+   * "motorola,cpcap-led-cp"		(Camera Privacy LED)
+- label: see Documentation/devicetree/bindings/leds/common.txt
+- vdd-supply: A phandle to the regulator powering the LED
+
+Example:
+
+&cpcap {
+	cpcap_led_red: red-led {
+		compatible = "motorola,cpcap-led-red";
+		label = "cpcap:red";
+		vdd-supply = <&sw5>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-cr0014114.txt b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
new file mode 100644
index 0000000000..f8de7516a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
@@ -0,0 +1,66 @@
+Crane Merchandising System - cr0014114 LED driver
+-------------------------------------------------
+
+This LED Board is widely used in vending machines produced
+by Crane Merchandising Systems.
+
+Required properties:
+- compatible: "crane,cr0014114"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+LED sub-node properties:
+- function :
+	see Documentation/devicetree/bindings/leds/common.txt
+- color :
+	see Documentation/devicetree/bindings/leds/common.txt
+- label :
+	see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+- linux,default-trigger : (optional)
+	see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@0 {
+	compatible = "crane,cr0014114";
+	reg = <0>;
+	spi-max-frequency = <50000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@0 {
+		reg = <0>;
+		function = "coin";
+		color = <LED_COLOR_ID_RED>;
+	};
+	led@1 {
+		reg = <1>;
+		function = "coin";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+	led@2 {
+		reg = <2>;
+		function = "coin";
+		color = <LED_COLOR_ID_BLUE>;
+	};
+	led@3 {
+		reg = <3>;
+		function = "bill";
+		color = <LED_COLOR_ID_RED>;
+	};
+	led@4 {
+		reg = <4>;
+		function = "bill";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+	led@5 {
+		reg = <5>;
+		function = "bill";
+		color = <LED_COLOR_ID_BLUE>;
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
new file mode 100644
index 0000000000..182f0035ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
@@ -0,0 +1,69 @@
+Crane Merchandising System - EL15203000 LED driver
+--------------------------------------------------
+
+This LED Board (aka RED LEDs board) is widely used in
+coffee vending machines produced by Crane Merchandising Systems.
+The board manages 3 LEDs and supports predefined blinking patterns
+for specific leds.
+
+Vending area LED encoded with symbol 'V' (hex code 0x56).
+Doesn't have any hardware blinking pattern.
+
+Screen light tube LED which surrounds vending machine screen and
+encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern.
+
+Water Pipe LED encoded with symbol 'P' (hex code 0x50) and
+actually consists of 5 LEDs that exposed by protocol like one LED.
+Supports next patterns:
+- cascade pattern
+- inversed cascade pattern
+- bounce pattern
+- inversed bounce pattern
+
+Required properties:
+- compatible : "crane,el15203000"
+- #address-cells : must be 1
+- #size-cells : must be 0
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+Optional LED sub-node properties:
+- function:
+	see Documentation/devicetree/bindings/leds/common.txt
+- color:
+	see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@0 {
+	compatible = "crane,el15203000";
+	reg = <0>;
+	spi-max-frequency = <50000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* water pipe */
+	led@50 {
+		reg = <0x50>;
+		function = "pipe";
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	/* screen frame */
+	led@53 {
+		reg = <0x53>;
+		function = "screen";
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	/* vending area */
+	led@56 {
+		reg = <0x56>;
+		function = "vend";
+		color = <LED_COLOR_ID_RED>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
new file mode 100644
index 0000000000..7e11703acb
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to GPIO lines
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the gpio-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: gpio-leds
+
+patternProperties:
+  # The first form is preferred, but fall back to just 'led' anywhere in the
+  # node name to at least catch some child nodes.
+  "(^led-[0-9a-f]$|led)":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      gpios:
+        maxItems: 1
+
+      retain-state-suspended:
+        description:
+          The suspend state can be retained.Such as charge-led gpio.
+        type: boolean
+
+      retain-state-shutdown:
+        description:
+          Retain the state of the LED on shutdown. Useful in BMC systems, for
+          example when the BMC is rebooted while the host remains up.
+        type: boolean
+
+    required:
+      - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    leds {
+        compatible = "gpio-leds";
+        led-0 {
+            gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+            linux,default-trigger = "disk-activity";
+            function = LED_FUNCTION_DISK;
+        };
+
+        led-1 {
+            gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+            /* Keep LED on if BIOS detected hardware fault */
+            default-state = "keep";
+            function = LED_FUNCTION_FAULT;
+        };
+    };
+
+    run-control {
+        compatible = "gpio-leds";
+        led-0 {
+            gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+        };
+        led-1 {
+            gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
new file mode 100644
index 0000000000..8ed059a5a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-group-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LED built with monochromatic LEDs
+
+maintainers:
+  - Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+
+description: |
+  This driver combines several monochromatic LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: leds-group-multicolor
+
+  leds:
+    description:
+      An aray of monochromatic leds
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+required:
+  - leds
+
+allOf:
+  - $ref: leds-class-multicolor.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    monochromatic-leds {
+        compatible = "gpio-leds";
+
+        led0: led-0 {
+            gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+            color = <LED_COLOR_ID_RED>;
+        };
+
+        led1: led-1 {
+            gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led2: led-2 {
+            gpios = <&mcu_pio 2 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_BLUE>;
+        };
+    };
+
+    multi-led {
+        compatible = "leds-group-multicolor";
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_INDICATOR;
+        leds = <&led0>, <&led1>, <&led2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
new file mode 100644
index 0000000000..926c211794
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
@@ -0,0 +1,52 @@
+Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers
+
+The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
+constant-current channels, each with independent 256-level PWM control.
+Each LED is represented as a sub-node of the device.
+
+Required properties:
+- compatible: one of
+	issi,is31fl3236
+	issi,is31fl3235
+	issi,is31fl3218
+	issi,is31fl3216
+	si-en,sn3218
+	si-en,sn3216
+- reg: I2C slave address
+- address-cells : must be 1
+- size-cells : must be 0
+
+LED sub-node properties:
+- reg : LED channel number (1..N)
+- label :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+
+
+Example:
+
+is31fl3236: led-controller@3c {
+	compatible = "issi,is31fl3236";
+	reg = <0x3c>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@1 {
+		reg = <1>;
+		label = "EB:blue:usr0";
+	};
+	led@2 {
+		reg = <2>;
+		label = "EB:blue:usr1";
+	};
+	...
+	led@36 {
+		reg = <36>;
+		label = "EB:blue:usr35";
+	};
+};
+
+For more product information please see the links below:
+http://www.issi.com/US/product-analog-fxled-driver.shtml
+http://www.si-en.com/product.asp?parentid=890
diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
new file mode 100644
index 0000000000..8b3b3bf1ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lgm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain (LGM) SoC LED Serial Shift Output (SSO) Controller driver
+
+maintainers:
+  - Zhu, Yi Xin <Yixin.zhu@intel.com>
+  - Amireddy Mallikarjuna reddy <mallikarjunax.reddy@intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-ssoled
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sso
+      - const: fpid
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+    description:
+      Number of GPIOs this controller provides.
+
+  intel,sso-update-rate-hz:
+    description:
+      Blink frequency for SOUTs in Hz.
+
+  led-controller:
+    type: object
+    description:
+      This sub-node must contain a sub-node for each leds.
+
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Index of the LED.
+            minimum: 0
+            maximum: 2
+
+          led-gpios:
+            maxItems: 1
+
+          intel,sso-hw-trigger:
+            type: boolean
+            description: This property indicates Hardware driven/control LED.
+
+          intel,sso-hw-blink:
+            type: boolean
+            description: This property indicates Enable LED blink by Hardware.
+
+          intel,sso-blink-rate-hz:
+            description: LED HW blink frequency.
+
+          retain-state-suspended:
+            type: boolean
+            description: The suspend state of LED can be retained.
+
+          retain-state-shutdown:
+            type: boolean
+            description: Retain the state of the LED on shutdown.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/intel,lgm-clk.h>
+    #include <dt-bindings/leds/common.h>
+
+    ssogpio: ssogpio@e0d40000 {
+      compatible = "intel,lgm-ssoled";
+      reg = <0xE0D40000 0x2E4>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      ngpios = <32>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ledc>;
+      clocks = <&cgu0 LGM_GCLK_LEDC0>, <&afeclk>;
+      clock-names = "sso", "fpid";
+      intel,sso-update-rate-hz = <250000>;
+
+      led-controller {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+          reg = <0>;
+          function = "gphy";
+          color = <LED_COLOR_ID_GREEN>;
+          led-gpios = <&ssogpio 0 0>;
+        };
+
+        led@2 {
+          reg = <2>;
+          function = LED_FUNCTION_POWER;
+          color = <LED_COLOR_ID_GREEN>;
+          led-gpios = <&ssogpio 23 0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
new file mode 100644
index 0000000000..097490a5ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
@@ -0,0 +1,105 @@
+* Texas Instruments - lm3532 White LED driver with ambient light sensing
+capability.
+
+The LM3532 provides the 3 high-voltage, low-side current sinks. The device is
+programmable over an I2C-compatible interface and has independent
+current control for all three channels. The adaptive current regulation
+method allows for different LED currents in each current sink thus allowing
+for a wide variety of backlight and keypad applications.
+
+The main features of the LM3532 include dual ambient light sensor inputs
+each with 32 internal voltage setting resistors, 8-bit logarithmic and linear
+brightness control, dual external PWM brightness control inputs, and up to
+1000:1 dimming ratio with programmable fade in and fade out settings.
+
+Required properties:
+	- compatible : "ti,lm3532"
+	- reg : I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional properties:
+	- enable-gpios : gpio pin to enable (active high)/disable the device.
+	- ramp-up-us - The Run time ramp rates/step are from one current
+		       set-point to another after the device has reached its
+		       initial target set point from turn-on
+	- ramp-down-us - The Run time ramp rates/step are from one current
+			 set-point to another after the device has reached its
+			 initial target set point from turn-on
+	Range for ramp settings: 8us - 65536us
+
+Optional properties if ALS mode is used:
+	- ti,als-vmin - Minimum ALS voltage defined in Volts
+	- ti,als-vmax - Maximum ALS voltage defined in Volts
+	Per the data sheet the max ALS voltage is 2V and the min is 0V
+
+	- ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms
+	- ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms
+	Range for impedance select: 37000 Ohms - 1190 Ohms
+	Values above 37kohms will be set to the "High Impedance" setting
+
+	- ti,als-avrg-time-us - Determines the length of time the device needs to
+			  average the two ALS inputs.  This is only used if
+			  the input mode is LM3532_ALS_INPUT_AVRG.
+			     Range: 17920us - 2293760us
+	- ti,als-input-mode - Determines how the device uses the attached ALS
+			   devices.
+			   0x00 - ALS1 and ALS2 input average
+			   0x01 - ALS1 Input
+			   0x02 - ALS2 Input
+			   0x03 - Max of ALS1 and ALS2
+
+Required child properties:
+	- reg : Indicates control bank the LED string is controlled by
+	- led-sources : see Documentation/devicetree/bindings/leds/common.txt
+	- ti,led-mode : Defines if the LED strings are manually controlled or
+			if the LED strings are controlled by the ALS.
+			0x00 - LED strings are I2C controlled via full scale
+			       brightness control register
+			0x01 - LED strings are ALS controlled
+
+Optional LED child properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+	- led-max-microamp : Defines the full scale current value for each control
+			  bank.  The range is from 5000uA-29800uA in increments
+			  of 800uA.
+
+Example:
+led-controller@38 {
+	compatible = "ti,lm3532";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x38>;
+
+	enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	ramp-up-us = <1024>;
+	ramp-down-us = <65536>;
+
+	ti,als-vmin = <0>;
+	ti,als-vmax = <2000>;
+	ti,als1-imp-sel = <4110>;
+	ti,als2-imp-sel = <2180>;
+	ti,als-avrg-time-us = <17920>;
+	ti,als-input-mode = <0x00>;
+
+	led@0 {
+		reg = <0>;
+		led-sources = <2>;
+		ti,led-mode = <1>;
+		led-max-microamp = <21800>;
+		label = ":backlight";
+		linux,default-trigger = "backlight";
+	};
+
+	led@1 {
+		reg = <1>;
+		led-sources = <1>;
+		ti,led-mode = <0>;
+		label = ":kbd_backlight";
+	};
+};
+
+For more product information please see the links below:
+https://www.ti.com/product/LM3532
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
new file mode 100644
index 0000000000..17e940025d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
@@ -0,0 +1,51 @@
+* Texas Instruments - lm3601x Single-LED Flash Driver
+
+The LM3601X are ultra-small LED flash drivers that
+provide a high level of adjustability.
+
+Required properties:
+	- compatible : Can be one of the following
+		"ti,lm36010"
+		"ti,lm36011"
+	- reg : I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Required child properties:
+	- reg : 0 - Indicates a IR mode
+		1 - Indicates a Torch (white LED) mode
+
+Required properties for flash LED child nodes:
+	See Documentation/devicetree/bindings/leds/common.txt
+	- flash-max-microamp : Range from 11mA - 1.5A
+	- flash-max-timeout-us : Range from 40ms - 1600ms
+	- led-max-microamp : Range from 2.4mA - 376mA
+
+Optional child properties:
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@64 {
+	compatible = "ti,lm36010";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x64>;
+
+	led@0 {
+		reg = <1>;
+		function = LED_FUNCTION_TORCH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-max-microamp = <376000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1600000>;
+	};
+}
+
+For more product information please see the links below:
+https://www.ti.com/product/LM36010
+https://www.ti.com/product/LM36011
diff --git a/Documentation/devicetree/bindings/leds/leds-lm36274.txt b/Documentation/devicetree/bindings/leds/leds-lm36274.txt
new file mode 100644
index 0000000000..de6f4931fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm36274.txt
@@ -0,0 +1,85 @@
+* Texas Instruments LM36274 4-Channel LCD Backlight Driver w/Integrated Bias
+
+The LM36274 is an integrated four-channel WLED driver and LCD bias supply.
+The backlight boost provides the power to bias four parallel LED strings with
+up to 29V total output voltage. The 11-bit LED current is programmable via
+the I2C bus and/or controlled via a logic level PWM input from 60 uA to 30 mA.
+
+Parent device properties are documented in
+Documentation/devicetree/bindings/mfd/ti-lmu.txt
+
+Regulator properties are documented in
+Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
+
+Required backlight properties:
+	- compatible:
+		"ti,lm36274-backlight"
+	- reg : 0
+	- #address-cells : 1
+	- #size-cells : 0
+	- led-sources : Indicates which LED strings will be enabled.
+			Values from 0-3, sources is 0 based so strings will be
+			source value + 1.
+
+Optional backlight properties:
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
+controlled by control bank B.
+
+lm36274@11 {
+	compatible = "ti,lm36274";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x11>;
+
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,lm363x-regulator";
+
+		enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+			       <&pioC 1 GPIO_ACTIVE_HIGH>;
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <7150000>;
+			regulator-always-on;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6500000>;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6500000>;
+		};
+	};
+
+	backlight {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,lm36274-backlight";
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 2>;
+			label = "white:backlight_cluster";
+			linux,default-trigger = "backlight";
+		};
+	};
+};
+
+For more product information please see the link below:
+https://www.ti.com/lit/ds/symlink/lm36274.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
new file mode 100644
index 0000000000..b1103d961d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -0,0 +1,65 @@
+* Texas Instruments - LM3692x Highly Efficient White LED Driver
+
+The LM3692x is an ultra-compact, highly efficient,
+white-LED driver designed for LCD display backlighting.
+
+The main difference between the LM36922 and LM36923 is the number of
+LED strings it supports.  The LM36922 supports two strings while the LM36923
+supports three strings.
+
+Required properties:
+	- compatible:
+		"ti,lm36922"
+		"ti,lm36923"
+	- reg :  I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional properties:
+	- enable-gpios : gpio pin to enable/disable the device.
+	- vled-supply : LED supply
+	- ti,ovp-microvolt: Overvoltage protection in
+	    micro-volt, can be 17000000, 21000000, 25000000 or
+	    29000000. If ti,ovp-microvolt is not specified it
+	    defaults to 29000000.
+
+Required child properties:
+	- reg : 0 - Will enable all LED sync paths
+		1 - Will enable the LED1 sync
+		2 - Will enable the LED2 sync
+		3 - Will enable the LED3 sync (LM36923 only)
+
+Optional child properties:
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+	- led-max-microamp :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@36 {
+	compatible = "ti,lm3692x";
+	reg = <0x36>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+	ti,ovp-microvolt = <29000000>;
+
+	led@0 {
+		reg = <0>;
+		function = LED_FUNCTION_BACKLIGHT;
+		color = <LED_COLOR_ID_WHITE>;
+		linux,default-trigger = "backlight";
+		led-max-microamp = <20000>;
+	};
+}
+
+For more product information please see the link below:
+https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
new file mode 100644
index 0000000000..221b37b604
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
@@ -0,0 +1,73 @@
+* Texas Instruments - LM3697 Highly Efficient White LED Driver
+
+The LM3697 11-bit LED driver provides high-
+performance backlight dimming for 1, 2, or 3 series
+LED strings while delivering up to 90% efficiency.
+
+This device is suitable for display and keypad lighting
+
+Required properties:
+	- compatible:
+		"ti,lm3697"
+	- reg :  I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional properties:
+	- enable-gpios : GPIO pin to enable/disable the device
+	- vled-supply : LED supply
+
+Required child properties:
+	- reg : 0 - LED is Controlled by bank A
+		1 - LED is Controlled by bank B
+	- led-sources : Indicates which HVLED string is associated to which
+			control bank.  This is a zero based property so
+			HVLED1 = 0, HVLED2 = 1, HVLED3 = 2.
+			Additional information is contained
+			in Documentation/devicetree/bindings/leds/common.txt
+
+Optional child properties:
+	- ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+	- ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+	- ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
+controlled by control bank B.
+
+led-controller@36 {
+	compatible = "ti,lm3697";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x36>;
+
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+
+	led@0 {
+		reg = <0>;
+		led-sources = <0 2>;
+		ti,brightness-resolution = <2047>;
+		ramp-up-us = <5000>;
+		ramp-down-us = <1000>;
+		label = "white:first_backlight_cluster";
+		linux,default-trigger = "backlight";
+	};
+
+	led@1 {
+		reg = <1>;
+		led-sources = <1>;
+		ti,brightness-resolution = <255>;
+		ramp-up-us = <500>;
+		ramp-down-us = <1000>;
+		label = "white:second_backlight_cluster";
+		linux,default-trigger = "backlight";
+	};
+}
+
+For more product information please see the link below:
+https://www.ti.com/lit/ds/symlink/lm3697.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
new file mode 100644
index 0000000000..402c254245
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for LP50XX RGB LED from Texas Instruments.
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
+  a LED group or control them individually.
+
+  The difference in these RGB LED drivers is the number of supported RGB
+  modules.
+
+  For more product information please see the link below:
+  https://www.ti.com/lit/ds/symlink/lp5012.pdf
+  https://www.ti.com/lit/ds/symlink/lp5024.pdf
+  https://www.ti.com/lit/ds/symlink/lp5036.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lp5009
+      - ti,lp5012
+      - ti,lp5018
+      - ti,lp5024
+      - ti,lp5030
+      - ti,lp5036
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address
+      lp5009/12 - 0x14, 0x15, 0x16, 0x17
+      lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
+      lp5030/36 - 0x30, 0x31, 0x32, 0x33
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+  vled-supply:
+    description: LED supply.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^multi-led@[0-9a-f]$':
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minItems: 1
+        maxItems: 12
+        description:
+          This property denotes the LED module number(s) that is used on the
+          for the child node.  The LED modules can either be used stand alone
+          or grouped into a module bank.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]+$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@14 {
+            compatible = "ti,lp5009";
+            reg = <0x14>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            enable-gpios = <&gpio1 16>;
+
+            multi-led@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x1>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_CHARGING;
+
+                led@0 {
+                     reg = <0x0>;
+                     color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                     reg = <0x1>;
+                     color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                     reg = <0x2>;
+                     color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+
+            multi-led@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x3>, <0x4>, <0x5>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+
+                led@3 {
+                    reg = <0x3>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@4 {
+                    reg = <0x4>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@5 {
+                    reg = <0x5>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
new file mode 100644
index 0000000000..e9d4514d01
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP55xx and LP8501 LED Drivers
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description: |
+  Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel
+  LED Drivers.
+
+  For more product information please see the link below:
+    https://www.ti.com/lit/gpn/lp5521
+    https://www.ti.com/lit/gpn/lp5523
+    https://www.ti.com/lit/gpn/lp55231
+    https://www.ti.com/lit/gpn/lp5562
+    https://www.ti.com/lit/gpn/lp8501
+
+properties:
+  compatible:
+    enum:
+      - national,lp5521
+      - national,lp5523
+      - ti,lp55231
+      - ti,lp5562
+      - ti,lp8501
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  clock-mode:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Input clock mode
+    enum:
+      - 0 # automode
+      - 1 # internal
+      - 2 # external
+
+  enable-gpios:
+    maxItems: 1
+    description: |
+      GPIO attached to the chip's enable pin
+
+  label: true
+
+  pwr-sel:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      LP8501 specific property. Power selection for output channels.
+    enum:
+      - 0 # D1~9 are connected to VDD
+      - 1 # D1~6 with VDD, D7~9 with VOUT
+      - 2 # D1~6 with VOUT, D7~9 with VDD
+      - 3 # D1~9 are connected to VOUT
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  ti,charge-pump-mode:
+    description:
+      Set the operating mode of the internal charge pump as defined in
+      <dt-bindings/leds/leds-lp55xx.h>.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3 # auto
+    maximum: 3
+
+patternProperties:
+  '^multi-led@[0-8]$':
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maximum: 8
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-8]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          led-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: |
+              Current setting at each LED channel (mA x10, 0 if LED is not connected)
+            minimum: 0
+            maximum: 255
+
+          max-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: Maximum current at each LED channel.
+
+          reg:
+            maximum: 8
+
+        required:
+          - reg
+
+  "^led@[0-8]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-cur:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: |
+          Current setting at each LED channel (mA x10, 0 if LED is not connected)
+        minimum: 0
+        maximum: 255
+
+      max-cur:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Maximum current at each LED channel.
+
+      reg:
+        description: |
+          Output channel for the LED.  This is zero based channel identifier and
+          the data sheet is a one based channel identifier.
+          reg value to output to LED output number
+        enum:
+          - 0 # LED output D1
+          - 1 # LED output D2
+          - 2 # LED output D3
+          - 3 # LED output D4
+          - 4 # LED output D5
+          - 5 # LED output D6
+          - 6 # LED output D7
+          - 7 # LED output D8
+          - 8 # LED output D9
+
+      chan-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: name of channel
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/leds/leds-lp55xx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@32 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "ti,lp8501";
+            reg = <0x32>;
+            clock-mode = /bits/ 8 <2>;
+            pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+            ti,charge-pump-mode = <LP55XX_CP_BYPASS>;
+
+            led@0 {
+                reg = <0>;
+                chan-name = "d1";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@1 {
+                reg = <1>;
+                chan-name = "d2";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@2 {
+                reg = <2>;
+                chan-name = "d3";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@3 {
+                reg = <3>;
+                chan-name = "d4";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@4 {
+                reg = <4>;
+                chan-name = "d5";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@5 {
+                reg = <5>;
+                chan-name = "d6";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@6 {
+                reg = <6>;
+                chan-name = "d7";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@7 {
+                reg = <7>;
+                chan-name = "d8";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@8 {
+                reg = <8>;
+                chan-name = "d9";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+        };
+
+        led-controller@33 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "national,lp5523";
+            reg = <0x33>;
+            clock-mode = /bits/ 8 <0>;
+
+            multi-led@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x2>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+                linux,default-trigger = "heartbeat";
+
+                led@0 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@1 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x1>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+
+                led@6 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x6>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
new file mode 100644
index 0000000000..8bb25749a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -0,0 +1,50 @@
+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+	- compatible :
+		"ti,lp8860"
+	- reg : I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional properties:
+	- enable-gpios : gpio pin to enable (active high)/disable the device.
+	- vled-supply : LED supply
+
+Required child properties:
+	- reg : 0
+
+Optional child properties:
+	- function : see Documentation/devicetree/bindings/leds/common.txt
+	- color : see Documentation/devicetree/bindings/leds/common.txt
+	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@2d {
+	compatible = "ti,lp8860";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x2d>;
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+
+	led@0 {
+		reg = <0>;
+		function = LED_FUNCTION_BACKLIGHT;
+		color = <LED_COLOR_ID_WHITE>;
+		linux,default-trigger = "backlight";
+	};
+}
+
+For more product information please see the link below:
+https://www.ti.com/product/lp8860-q1
diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
new file mode 100644
index 0000000000..24eccdaa63
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
@@ -0,0 +1,37 @@
+Bindings for Linear Technologies LT3593 LED controller
+
+Required properties:
+- compatible:		Should be "lltc,lt3593".
+- lltc,ctrl-gpios:	A handle to the GPIO that is connected to the 'CTRL'
+			pin of the chip.
+
+The hardware supports only one LED. The properties of this LED are
+configured in a sub-node in the device node.
+
+Optional sub-node properties:
+- function:		See Documentation/devicetree/bindings/leds/common.txt
+- color:		See Documentation/devicetree/bindings/leds/common.txt
+- label:		A label for the LED. If none is given, the LED will be
+			named "lt3595::" (deprecated)
+- linux,default-trigger: The default trigger for the LED.
+			See Documentation/devicetree/bindings/leds/common.txt
+- default-state:	The initial state of the LED.
+			See Documentation/devicetree/bindings/leds/common.txt
+
+If multiple chips of this type are found in a design, each one needs to
+be handled by its own device node.
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller {
+	compatible = "lltc,lt3593";
+	lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+
+	led {
+		function = LED_FUNCTION_BACKLIGHT;
+		color = <LED_COLOR_ID_WHITE>;
+		default-state = "on";
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
new file mode 100644
index 0000000000..fdb08f44a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-max77650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The LED controller is represented as a sub-node of the PMIC node on
+  the device tree.
+
+  This device has three current sinks.
+
+properties:
+  compatible:
+    const: maxim,max77650-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-2]$":
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          Index of the LED.
+        minimum: 0
+        maximum: 2
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 0000000000..052dccb8f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,63 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED
+controllers are defined as the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of Muti-Function Device (MFD)
+using shared bus called PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+
+Required properties:
+- compatible : Must be one of
+  - "mediatek,mt6323-led"
+  - "mediatek,mt6331-led"
+  - "mediatek,mt6332-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+Each led is represented as a child node of the mediatek,mt6323-led that
+describes the initial behavior for each LED physically and currently only four
+LED child nodes can be supported.
+
+Required properties for the LED child node:
+- reg : LED channel number (0..3)
+
+Optional properties for the LED child node:
+- label : See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt
+- default-state: See Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	mt6323: pmic {
+		compatible = "mediatek,mt6323";
+
+		...
+
+		mt6323led: leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				label = "LED0";
+				linux,default-trigger = "timer";
+				default-state = "on";
+			};
+			led@1 {
+				reg = <1>;
+				label = "LED1";
+				default-state = "off";
+			};
+			led@2 {
+				reg = <2>;
+				label = "LED2";
+				default-state = "on";
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
new file mode 100644
index 0000000000..d84e28e616
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
+  Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+  and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6360-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-5]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        enum:
+          - 0 # LED output ISINK1
+          - 1 # LED output ISINK2
+          - 2 # LED output ISINK3
+          - 3 # LED output ISINKML
+          - 4 # LED output FLASH1
+          - 5 # LED output FLASH2
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/leds/common.h>
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     multi-led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RGB>;
+       led-max-microamp = <24000>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       led@0 {
+         reg = <0>;
+         color = <LED_COLOR_ID_RED>;
+       };
+       led@1 {
+         reg = <1>;
+         color = <LED_COLOR_ID_GREEN>;
+       };
+       led@2 {
+         reg = <2>;
+         color = <LED_COLOR_ID_BLUE>;
+       };
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+
+  - |
+
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RED>;
+       led-max-microamp = <24000>;
+     };
+     led@1 {
+       reg = <1>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_GREEN>;
+       led-max-microamp = <24000>;
+     };
+     led@2 {
+       reg = <2>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_BLUE>;
+       led-max-microamp = <24000>;
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
new file mode 100644
index 0000000000..5ef92a26d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
@@ -0,0 +1,92 @@
+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+  Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+  A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- max-brightness: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+	compatible = "lacie,netxbig-leds";
+
+	gpio-ext = &gpio_ext;
+
+	timers = <NETXBIG_LED_TIMER1 500 500
+		  NETXBIG_LED_TIMER2 500 1000>;
+
+	blue-power {
+		label = "netxbig:blue:power";
+		mode-addr = <0>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 1
+			    NETXBIG_LED_TIMER1 3
+			    NETXBIG_LED_TIMER2 7>;
+		bright-addr = <1>;
+		max-brightness = <7>;
+	};
+	red-power {
+		label = "netxbig:red:power";
+		mode-addr = <0>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 2
+			    NETXBIG_LED_TIMER1 4>;
+		bright-addr = <1>;
+		max-brightness = <7>;
+	};
+	blue-sata0 {
+		label = "netxbig:blue:sata0";
+		mode-addr = <3>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 7
+			    NETXBIG_LED_SATA 1
+			    NETXBIG_LED_TIMER1 3>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+	red-sata0 {
+		label = "netxbig:red:sata0";
+		mode-addr = <3>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 2
+			    NETXBIG_LED_TIMER1 4>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+	blue-sata1 {
+		label = "netxbig:blue:sata1";
+		mode-addr = <4>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 7
+			    NETXBIG_LED_SATA 1
+			    NETXBIG_LED_TIMER1 3>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+	red-sata1 {
+		label = "netxbig:red:sata1";
+		mode-addr = <4>;
+		mode-val = <NETXBIG_LED_OFF 0
+			    NETXBIG_LED_ON 2
+			    NETXBIG_LED_TIMER1 4>;
+		bright-addr = <2>;
+		max-brightness = <7>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
new file mode 100644
index 0000000000..9f81258a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -0,0 +1,35 @@
+Binding for dual-GPIO LED found on Network Space v2 (and parents).
+
+Required properties:
+- compatible: "lacie,ns2-leds".
+
+Each LED is represented as a sub-node of the ns2-leds device.
+
+Required sub-node properties:
+- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
+- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
+  the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
+  should be given in order to avoid having an unknown mode at driver probe time.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+#include <dt-bindings/leds/leds-ns2.h>
+
+ns2-leds {
+	compatible = "lacie,ns2-leds";
+
+	blue-sata {
+		label = "ns2:blue:sata";
+		slow-gpio = <&gpio0 29 0>;
+		cmd-gpio = <&gpio0 30 0>;
+		modes-map = <NS_V2_LED_OFF  0 1
+			     NS_V2_LED_ON   1 0
+			     NS_V2_LED_ON   0 0
+			     NS_V2_LED_SATA 1 1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
new file mode 100644
index 0000000000..817f460f3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
@@ -0,0 +1,89 @@
+* NXP - pca955x LED driver
+
+The PCA955x family of chips are I2C LED blinkers whose pins not used
+to control LEDs can be used as general purpose I/Os. The GPIO pins can
+be input or output, and output pins can also be pulse-width controlled.
+
+Required properties:
+- compatible : should be one of :
+	"nxp,pca9550"
+	"nxp,pca9551"
+	"nxp,pca9552"
+	"ibm,pca9552"
+	"nxp,pca9553"
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: I2C slave address. depends on the model.
+
+Optional properties:
+- gpio-controller: allows pins to be used as GPIOs.
+- #gpio-cells: must be 2.
+- gpio-line-names: define the names of the GPIO lines
+
+LED sub-node properties:
+- reg : number of LED line.
+		from 0 to  1 for the pca9550
+		from 0 to  7 for the pca9551
+		from 0 to 15 for the pca9552
+		from 0 to  3 for the pca9553
+- type: (optional) either
+	PCA955X_TYPE_NONE
+	PCA955X_TYPE_LED
+	PCA955X_TYPE_GPIO
+	see dt-bindings/leds/leds-pca955x.h (default to LED)
+- label : (optional)
+	see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+	see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9552: pca9552@60 {
+	compatible = "nxp,pca9552";
+	#address-cells = <1>;
+        #size-cells = <0>;
+	reg = <0x60>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+	gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
+
+	gpio@12 {
+		reg = <12>;
+		type = <PCA955X_TYPE_GPIO>;
+	};
+	gpio@13 {
+		reg = <13>;
+		type = <PCA955X_TYPE_GPIO>;
+	};
+	gpio@14 {
+		reg = <14>;
+		type = <PCA955X_TYPE_GPIO>;
+	};
+	gpio@15 {
+		reg = <15>;
+		type = <PCA955X_TYPE_GPIO>;
+	};
+
+	led@0 {
+		label = "red:power";
+		linux,default-trigger = "default-on";
+		reg = <0>;
+		type = <PCA955X_TYPE_LED>;
+	};
+	led@1 {
+		label = "green:power";
+		reg = <1>;
+		type = <PCA955X_TYPE_LED>;
+	};
+	led@2 {
+		label = "pca9552:yellow";
+		reg = <2>;
+		type = <PCA955X_TYPE_LED>;
+	};
+	led@3 {
+		label = "pca9552:white";
+		reg = <3>;
+		type = <PCA955X_TYPE_LED>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-powernv.txt b/Documentation/devicetree/bindings/leds/leds-powernv.txt
new file mode 100644
index 0000000000..66655690f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-powernv.txt
@@ -0,0 +1,26 @@
+Device Tree binding for LEDs on IBM Power Systems
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-v3-led".
+- led-mode   : Should be "lightpath" or "guidinglight".
+
+Each location code of FRU/Enclosure must be expressed in the
+form of a sub-node.
+
+Required properties for the sub nodes:
+- led-types : Supported LED types (attention/identify/fault) provided
+              in the form of string array.
+
+Example:
+
+leds {
+	compatible = "ibm,opal-v3-led";
+	led-mode = "lightpath";
+
+	U78C9.001.RST0027-P1-C1 {
+		led-types = "identify", "fault";
+	};
+	...
+	...
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 0000000000..bd6ec04a87
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          active-low:
+            description: For PWMs where the LED is wired to supply rather than ground.
+            type: boolean
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+            color = <LED_COLOR_ID_RGB>;
+            function = LED_FUNCTION_INDICATOR;
+            max-brightness = <65535>;
+
+            led-red {
+                pwms = <&pwm1 0 1000000>;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led-green {
+                pwms = <&pwm2 0 1000000>;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led-blue {
+                pwms = <&pwm3 0 1000000>;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 0000000000..7de6da58be
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the pwm-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: pwm-leds
+
+patternProperties:
+  "^led(-[0-9a-f]+)?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      pwms:
+        maxItems: 1
+
+      pwm-names: true
+
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-low:
+        description:
+          For PWMs where the LED is wired to supply rather than ground.
+        type: boolean
+
+    required:
+      - pwms
+      - max-brightness
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds";
+
+        led-1 {
+            label = "omap4::keypad";
+            pwms = <&twl_pwm 0 7812500>;
+            max-brightness = <127>;
+        };
+
+        led-2 {
+            color = <LED_COLOR_ID_GREEN>;
+            function = LED_FUNCTION_CHARGING;
+            pwms = <&twl_pwmled 0 7812500>;
+            max-brightness = <255>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 0000000000..ea84ad426d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table, the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm660l-lpg
+          - qcom,pm8150b-lpg
+          - qcom,pm8150l-lpg
+          - qcom,pm8350c-pwm
+          - qcom,pm8916-pwm
+          - qcom,pm8941-lpg
+          - qcom,pm8994-lpg
+          - qcom,pmc8180c-lpg
+          - qcom,pmi632-lpg
+          - qcom,pmi8994-lpg
+          - qcom,pmi8998-lpg
+          - qcom,pmk8550-pwm
+      - items:
+          - enum:
+              - qcom,pm8550-pwm
+          - const: qcom,pm8350c-pwm
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputted, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
new file mode 100644
index 0000000000..bfd0e240f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-rt4505.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4505 Single Channel LED Driver
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT4505 is a flash LED driver that can support up to 375mA and 1.5A for
+  torch and flash mode, respectively.
+
+  The data sheet can be found at:
+    https://www.richtek.com/assets/product_file/RT4505/DS4505-02.pdf
+
+properties:
+  compatible:
+    const: richtek,rt4505
+
+  reg:
+    description: I2C slave address of the controller.
+    maxItems: 1
+
+  led:
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      led-controller@63 {
+        compatible = "richtek,rt4505";
+        reg = <0x63>;
+
+        rt4505_flash: led {
+          function = LED_FUNCTION_FLASH;
+          color = <LED_COLOR_ID_WHITE>;
+          led-max-microamp = <375000>;
+          flash-max-microamp = <1500000>;
+          flash-max-timeout-us = <800000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
new file mode 100644
index 0000000000..df2b4e1c49
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
@@ -0,0 +1,43 @@
+LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
+
+The SC27xx breathing light controller supports to 3 outputs:
+red LED, green LED and blue LED. Each LED can work at normal
+PWM mode or breath light mode.
+
+Required properties:
+- compatible: Should be "sprd,sc2731-bltc".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: Specify the controller address.
+
+Required child properties:
+- reg: Port this LED is connected to.
+
+Optional child properties:
+- function: See Documentation/devicetree/bindings/leds/common.txt.
+- color: See Documentation/devicetree/bindings/leds/common.txt.
+- label: See Documentation/devicetree/bindings/leds/common.txt (deprecated).
+
+Examples:
+
+led-controller@200 {
+	compatible = "sprd,sc2731-bltc";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x200>;
+
+	led@0 {
+		color = <LED_COLOR_ID_RED>;
+		reg = <0x0>;
+	};
+
+	led@1 {
+		color = <LED_COLOR_ID_GREEN>;
+		reg = <0x1>;
+	};
+
+	led@2 {
+		color = <LED_COLOR_ID_BLUE>;
+		reg = <0x2>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
new file mode 100644
index 0000000000..37d2a93780
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver
+
+maintainers:
+  - Luca Weiss <luca@z3ntu.xyz>
+
+description: |
+  The SGM3140 is a current-regulated charge pump which can regulate two current
+  levels for Flash and Torch modes.
+
+  The data sheet can be found at:
+    http://www.sg-micro.com/uploads/soft/20190626/1561535688.pdf
+
+properties:
+  compatible:
+    enum:
+      - ocs,ocp8110
+      - richtek,rt5033-led
+      - sgmicro,sgm3140
+
+  enable-gpios:
+    maxItems: 1
+    description: A connection to the 'EN' pin.
+
+  flash-gpios:
+    maxItems: 1
+    description: A connection to the 'FLASH' pin.
+
+  vin-supply:
+    description: Regulator providing power to the 'VIN' pin.
+
+  led:
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - flash-gpios
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "sgmicro,sgm3140";
+        flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+        enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+        vin-supply = <&reg_dcdc1>;
+
+        sgm3140_flash: led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-spi-byte.txt b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt
new file mode 100644
index 0000000000..28b6b2d909
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt
@@ -0,0 +1,44 @@
+* Single Byte SPI LED Device Driver.
+
+The driver can be used for controllers with a very simple SPI protocol:
+- one LED is controlled by a single byte on MOSI
+- the value of the byte gives the brightness between two values (lowest to
+  highest)
+- no return value is necessary (no MISO signal)
+
+The value for lowest and highest brightness is dependent on the device and
+therefore on the compatible string.
+
+Depending on the compatible string some special functions (like hardware
+accelerated blinking) might can be supported too.
+
+The driver currently only supports one LED. The properties of the LED are
+configured in a sub-node in the device node.
+
+Required properties:
+- compatible: should be one of
+   * "ubnt,acb-spi-led"		microcontroller (SONiX 8F26E611LA) based device
+				used for example in Ubiquiti airCube ISP
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply.
+
+LED sub-node properties:
+- label:
+	see Documentation/devicetree/bindings/leds/common.txt
+- default-state:
+	see Documentation/devicetree/bindings/leds/common.txt
+	Only "on" and "off" are supported.
+
+Example:
+
+led-controller@0 {
+	compatible = "ubnt,acb-spi-led";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+
+	led {
+		label = "white:status";
+		default-state = "on";
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
new file mode 100644
index 0000000000..3bbbf70244
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
@@ -0,0 +1,40 @@
+LEDs connected to tlc59116 or tlc59108
+
+Required properties
+- compatible: should be "ti,tlc59116" or "ti,tlc59108"
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: typically 0x68
+
+Each led is represented as a sub-node of the ti,tlc59116.
+See Documentation/devicetree/bindings/leds/common.txt
+
+LED sub-node properties:
+- reg: number of LED line, 0 to 15 or 0 to 7
+- label: (optional) name of LED
+- linux,default-trigger : (optional)
+
+Examples:
+
+tlc59116@68 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "ti,tlc59116";
+	reg = <0x68>;
+
+	wan@0 {
+		label = "wrt1900ac:amber:wan";
+		reg = <0x0>;
+	};
+
+	2g@2 {
+		label = "wrt1900ac:white:2g";
+		reg = <0x2>;
+	};
+
+	alive@9 {
+		label = "wrt1900ac:green:alive";
+		reg = <0x9>;
+		linux,default_trigger = "heartbeat";
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
new file mode 100644
index 0000000000..d3696680bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
@@ -0,0 +1,49 @@
+* Pattern format for LED pattern trigger
+
+The pattern is given by a series of tuples, of brightness and duration (ms).
+The LED is expected to traverse the series and each brightness value for the
+specified duration. Duration of 0 means brightness should immediately change to
+new value, and writing malformed pattern deactivates any active one.
+
+1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So
+the tuple with duration less than dimming interval (50ms) is treated as a step
+change of brightness, i.e. the subsequent brightness will be applied without
+adding intervening dimming intervals.
+
+The gradual dimming format of the software pattern values should be:
+"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...".
+For example (using sysfs interface):
+
+echo 0 1000 255 2000 > pattern
+
+It will make the LED go gradually from zero-intensity to max (255) intensity in
+1000 milliseconds, then back to zero intensity in 2000 milliseconds:
+
+LED brightness
+    ^
+255-|       / \            / \            /
+    |      /    \         /    \         /
+    |     /       \      /       \      /
+    |    /          \   /          \   /
+  0-|   /             \/             \/
+    +---0----1----2----3----4----5----6------------> time (s)
+
+2. To make the LED go instantly from one brightness value to another, we should
+use zero-time lengths (the brightness must be same as the previous tuple's). So
+the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2
+duration_2 brightness_2 0 ...".
+For example (using sysfs interface):
+
+echo 0 1000 0 0 255 2000 255 0 > pattern
+
+It will make the LED stay off for one second, then stay at max brightness for
+two seconds:
+
+LED brightness
+    ^
+255-|        +---------+    +---------+
+    |        |         |    |         |
+    |        |         |    |         |
+    |        |         |    |         |
+  0-|   -----+         +----+         +----
+    +---0----1----2----3----4----5----6------------> time (s)
diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
new file mode 100644
index 0000000000..e27f57bb52
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  There are two LED outputs available - FLED1 and FLED2. Each of them can
+  control a separate LED or they can be connected together to double the
+  maximum current for a single connected LED. One LED is represented by one
+  child node.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-led
+
+  maxim,boost-mode:
+    description:
+      In boost mode the device can produce up to 1.2A of total current on both
+      outputs. The maximum current on each output is reduced to 625mA then. If
+      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+      case both current sources are used.
+      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  maxim,boost-mvout:
+    description: |
+      Output voltage of the boost module in millivolts.
+      Valid values: 3300 - 5500, step by 25 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3300
+    maximum: 5500
+    default: 3300
+
+  maxim,mvsys-min:
+    description: |
+      Low input voltage level in millivolts. Flash is not fired if chip
+      estimates that system voltage could drop below this level due to flash
+      power consumption.
+      Valid values: 2400 - 3400, step by 33 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2400
+    maximum: 3400
+    default: 2400
+
+patternProperties:
+  "^([a-z]+-)?led[01]?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      led-max-microamp:
+        description: |
+          Valid values for a LED connected to one FLED output:
+            15625 - 250000, step by 15625 (rounded down)
+          Valid values for a LED connected to both FLED outputs:
+            15625 - 500000, step by 15625 (rounded down)
+
+      flash-max-microamp:
+        description: |
+          Valid values for a single LED connected to one FLED output
+          (boost mode must be turned off):
+            15625 - 1000000, step by 15625 (rounded down)
+          Valid values for a single LED connected to both FLED outputs:
+            15625 - 1250000, step by 15625 (rounded down)
+          Valid values for two LEDs case:
+            15625 - 625000, step by 15625 (rounded down)
+
+      flash-max-timeout-us:
+        description: |
+          Valid values: 62500 - 1000000, step by 62500 (rounded down)
+        minimum: 62500
+        maximum: 1000000
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+      - led-sources
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
new file mode 100644
index 0000000000..e9d02ed6a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-flashlight
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
new file mode 100644
index 0000000000..16b3abc2af
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6370-indicator
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-3]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - color
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - color
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
new file mode 100644
index 0000000000..9610bca57d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca953x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9532 LED Dimmer
+
+maintainers:
+  - Riku Voipio <riku.voipio@iki.fi>
+
+description: |
+  The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
+  The PWM support 256 steps.
+
+  For more product information please see the link below:
+    https://www.nxp.com/docs/en/data-sheet/PCA9532.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9530
+      - nxp,pca9531
+      - nxp,pca9532
+      - nxp,pca9533
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  "^led-[0-9a-z]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      type:
+        description: |
+          Output configuration, see include/dt-bindings/leds/leds-pca9532.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
+        minimum: 0
+        maximum: 4
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/leds-pca9532.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@62 {
+            compatible = "nxp,pca9533";
+            reg = <0x62>;
+
+            led-1 {
+                label = "pca:red:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-2 {
+                label = "pca:green:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-3 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "on";
+            };
+
+            led-4 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "keep";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
new file mode 100644
index 0000000000..654915c1f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca995x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA995x LED controllers
+
+maintainers:
+  - Isai Gaspar <isaiezequiel.gaspar@nxp.com>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The NXP PCA9952/PCA9955B are programmable LED controllers connected via I2C
+  that can drive 16 separate lines. Each of them can be individually switched
+  on and off, and brightness can be controlled via individual PWM.
+
+  Datasheets are available at
+  https://www.nxp.com/docs/en/data-sheet/PCA9952_PCA9955.pdf
+  https://www.nxp.com/docs/en/data-sheet/PCA9955B.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9952
+      - nxp,pca9955b
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-9a-f]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 15
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@1 {
+            compatible = "nxp,pca9955b";
+            reg = <0x01>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/panasonic,an30259a.yaml b/Documentation/devicetree/bindings/leds/panasonic,an30259a.yaml
new file mode 100644
index 0000000000..e918dceea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/panasonic,an30259a.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/panasonic,an30259a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Panasonic AN30259A 3-channel LED controller
+
+maintainers:
+  - Iskren Chernev <me@iskren.info>
+
+description:
+  The AN30259A is a LED controller capable of driving three LEDs independently.
+  It supports constant current output and sloping current output modes. The chip
+  is connected over I2C.
+
+properties:
+  compatible:
+    const: panasonic,an30259a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-3]$":
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [ 1, 2, 3 ]
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "panasonic,an30259a";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                linux,default-trigger = "heartbeat";
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led@2 {
+                reg = <2>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led@3 {
+                reg = <3>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
new file mode 100644
index 0000000000..4eee414820
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -0,0 +1,52 @@
+LEDs connected to pca9632, pca9633 or pca9634
+
+Required properties:
+- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
+
+Optional properties:
+- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
+  to open-drain, newer chips to totem pole)
+- nxp,hw-blink : use hardware blinking instead of software blinking
+- nxp,period-scale : In some configurations, the chip blinks faster than expected.
+		     This parameter provides a scaling ratio (fixed point, decimal divided
+		     by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
+- nxp,inverted-out: invert the polarity of the generated PWM
+
+Each led is represented as a sub-node of the nxp,pca963x device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
+		0 to 7 in pca9634, or 0 to 15 in pca9635)
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9632: pca9632 {
+	compatible = "nxp,pca9632";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x62>;
+
+	red@0 {
+		label = "red";
+		reg = <0>;
+		linux,default-trigger = "none";
+	};
+	green@1 {
+		label = "green";
+		reg = <1>;
+		linux,default-trigger = "none";
+	};
+	blue@2 {
+		label = "blue";
+		reg = <2>;
+		linux,default-trigger = "none";
+	};
+	unused@3 {
+		label = "unused";
+		reg = <3>;
+		linux,default-trigger = "none";
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml
new file mode 100644
index 0000000000..fa03e73622
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,pm8058-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8058 PMIC LED
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal
+  LEDs, two "flash" LEDs and one "keypad backlight" LED. The names are quoted
+  because sometimes these LED drivers are used for wildly different things than
+  flash or keypad backlight:: their names are more of a suggestion than a
+  hard-wired usecase.
+
+  Hardware-wise the different LEDs support slightly different output currents.
+  The "flash" LEDs do not need to charge nor do they support external triggers.
+  They are just powerful LED drivers.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-led
+      - qcom,pm8058-keypad-led
+      - qcom,pm8058-flash-led
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@131 {
+            compatible = "qcom,pm8058-led";
+            reg = <0x131>;
+            label = "pm8058:red";
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
new file mode 100644
index 0000000000..a8736fd5a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED device inside Qualcomm Technologies, Inc. PMICs
+
+maintainers:
+  - Fenglin Wu <quic_fenglinw@quicinc.com>
+
+description: |
+  Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs.
+  The flash LED module can have different number of LED channels supported
+  e.g. 3 or 4. There are some different registers between them but they can
+  both support maximum current up to 1.5 A per channel and they can also support
+  ganging 2 channels together to supply maximum current up to 2 A. The current
+  will be split symmetrically on each channel and they will be enabled and
+  disabled at the same time.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm6150l-flash-led
+          - qcom,pm8150c-flash-led
+          - qcom,pm8150l-flash-led
+          - qcom,pm8350c-flash-led
+          - qcom,pm8550-flash-led
+          - qcom,pmi8998-flash-led
+      - const: qcom,spmi-flash-led
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^led-[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Represents the physical LED components which are connected to the
+      flash LED channels' output.
+
+    properties:
+      led-sources:
+        description:
+          The HW indices of the flash LED channels that connect to the
+          physical LED
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2, 3, 4]
+
+      led-max-microamp:
+        anyOf:
+          - minimum: 5000
+            maximum: 500000
+            multipleOf: 5000
+          - minimum: 10000
+            maximum: 1000000
+            multipleOf: 10000
+
+      flash-max-microamp:
+        anyOf:
+          - minimum: 12500
+            maximum: 1500000
+            multipleOf: 12500
+          - minimum: 25000
+            maximum: 2000000
+            multipleOf: 25000
+
+      flash-max-timeout-us:
+        minimum: 10000
+        maximum: 1280000
+        multipleOf: 10000
+
+    required:
+      - led-sources
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        led-controller@ee00 {
+            compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
+            reg = <0xee00>;
+
+            led-0 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+                led-sources = <1>, <4>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <0>;
+            };
+
+            led-1 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_YELLOW>;
+                led-sources = <2>, <3>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
new file mode 100644
index 0000000000..ed26ec19ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/register-bit-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Register Bit LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  Register bit leds are used with syscon multifunctional devices where single
+  bits in a certain register can turn on/off a single LED. The register bit LEDs
+  appear as children to the syscon device, with the proper compatible string.
+  For the syscon bindings see:
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+allOf:
+  - $ref: /schemas/leds/common.yaml#
+
+properties:
+  $nodename:
+    description:
+      The unit-address is in the form of @<reg addr>,<bit offset>
+    pattern: '^led@[0-9a-f]+,[0-9a-f]{1,2}$'
+
+  compatible:
+    const: register-bit-led
+
+  reg:
+    description:
+      The register address and size
+    maxItems: 1
+
+  mask:
+    description:
+      bit mask for the bit controlling this LED in the register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      [ 0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800,
+        0x1000, 0x2000, 0x4000, 0x8000, 0x10000, 0x20000, 0x40000, 0x80000,
+        0x100000, 0x200000, 0x400000, 0x800000, 0x1000000, 0x2000000, 0x4000000,
+        0x8000000, 0x10000000, 0x20000000, 0x40000000, 0x80000000 ]
+
+  offset:
+    description:
+      register offset to the register controlling this LED
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+required:
+  - compatible
+  - mask
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    syscon@10000000 {
+        compatible = "arm,realview-pb1176-syscon", "syscon";
+        reg = <0x10000000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x10000000 0x1000>;
+
+        led@8,0 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x01>;
+            label = "versatile:0";
+            linux,default-trigger = "heartbeat";
+            default-state = "on";
+        };
+        led@8,1 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x02>;
+            label = "versatile:1";
+            default-state = "off";
+        };
+        led@8,2 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x04>;
+            label = "versatile:2";
+            default-state = "off";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml
new file mode 100644
index 0000000000..4ef7b96e9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/regulator-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Regulator LEDs are powered by a single regulator such that they can
+  be turned on or off by enabling or disabling the regulator. The available
+  brightness settings will be inferred from the available voltages on the
+  regulator, and any constraints on the voltage or current will need to be
+  specified on the regulator.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^led.*$'
+
+  compatible:
+    const: regulator-led
+
+  vled-supply:
+    description:
+      The regulator controlling the current to the LED.
+
+  function: true
+  color: true
+  linux,default-trigger: true
+  default-state: true
+
+required:
+  - compatible
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-heartbeat {
+        compatible = "regulator-led";
+        vled-supply = <&regulator>;
+        function = LED_FUNCTION_STATUS;
+        color = <LED_COLOR_ID_BLUE>;
+        linux,default-trigger = "heartbeat";
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
new file mode 100644
index 0000000000..68c328eec0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT8515 1.5A dual channel LED driver
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Richtek RT8515 is a dual channel (two mode) LED driver that
+  supports driving a white LED in flash or torch mode. The maximum
+  current for each mode is defined in hardware using two resistors
+  RFS and RTS.
+
+properties:
+  compatible:
+    const: richtek,rt8515
+
+  enf-gpios:
+    maxItems: 1
+    description: A connection to the 'ENF' (enable flash) pin.
+
+  ent-gpios:
+    maxItems: 1
+    description: A connection to the 'ENT' (enable torch) pin.
+
+  richtek,rfs-ohms:
+    minimum: 7680
+    maximum: 367000
+    description: The resistance value of the RFS resistor. This
+      resistors limits the maximum flash current. This must be set
+      for the property flash-max-microamp to work, the RFS resistor
+      defines the range of the dimmer setting (brightness) of the
+      flash LED.
+
+  richtek,rts-ohms:
+    minimum: 7680
+    maximum: 367000
+    description: The resistance value of the RTS resistor. This
+      resistors limits the maximum torch current. This must be set
+      for the property torch-max-microamp to work, the RTS resistor
+      defines the range of the dimmer setting (brightness) of the
+      torch LED.
+
+  led:
+    type: object
+    $ref: common.yaml#
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us: true
+
+      flash-max-microamp:
+        maximum: 700000
+        description: The maximum current for flash mode
+          is hardwired to the component using the RFS resistor to
+          ground. The maximum hardware current setting is calculated
+          according to the formula Imax = 5500 / RFS. The lowest
+          allowed resistance value is 7.86 kOhm giving an absolute
+          maximum current of 700mA. By setting this attribute in
+          the device tree, you can further restrict the maximum
+          current below the hardware limit. This requires the RFS
+          to be defined as it defines the maximum range.
+
+      led-max-microamp:
+        maximum: 700000
+        description: The maximum current for torch mode
+          is hardwired to the component using the RTS resistor to
+          ground. The maximum hardware current setting is calculated
+          according to the formula Imax = 5500 / RTS. The lowest
+          allowed resistance value is 7.86 kOhm giving an absolute
+          maximum current of 700mA. By setting this attribute in
+          the device tree, you can further restrict the maximum
+          current below the hardware limit. This requires the RTS
+          to be defined as it defines the maximum range.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ent-gpios
+  - enf-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "richtek,rt8515";
+        enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+        ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+        richtek,rfs-ohms = <16000>;
+        richtek,rts-ohms = <100000>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            flash-max-timeout-us = <250000>;
+            flash-max-microamp = <150000>;
+            led-max-microamp = <25000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 0000000000..44dd91aa23
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD2606MVV LED controller
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  The BD2606 MVV is a programmable LED controller connected via I2C that can
+  drive 6 separate lines. Each of them can be individually switched on and off,
+  but the brightness setting is shared between pairs of them.
+
+  Datasheet is available at
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bd2606mvv
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+patternProperties:
+  "^led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 5
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@66 {
+            compatible = "rohm,bd2606mvv";
+            reg = <0x66>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
new file mode 100644
index 0000000000..b7a3ef76cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit LED driver
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  This module is part of the ROHM BD71828 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+  The LED controller is represented as a sub-node of the PMIC node on the device
+  tree.
+
+  The device has two LED outputs referred as GRNLED and AMBLED in data-sheet.
+
+properties:
+  compatible:
+    const: rohm,bd71828-leds
+
+patternProperties:
+  "^led-[1-2]$":
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      rohm,led-compatible:
+        description: LED identification string
+        $ref: /schemas/types.yaml#/definitions/string
+        enum:
+          - bd71828-ambled
+          - bd71828-grnled
+
+required:
+  - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 0000000000..a6aaa92dbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+  asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+  respectively. In order to add a capability of selecting the strobe signal
+  source (e.g. CPU or camera sensor) there is an additional switch required,
+  independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+  compatible:
+    const: skyworks,aat1290
+
+  enset-gpios:
+    maxItems: 1
+    description: EN_SET pin
+
+  flen-gpios:
+    maxItems: 1
+    description: FL_EN pin
+
+  led:
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-max-microamp: true
+
+      flash-max-microamp:
+        description: |
+          Maximum flash LED supply current can be calculated using following
+          formula:: I = 1A * 162 kOhm / Rset.
+
+      flash-max-timeout-us:
+        description: |
+          Maximum flash timeout can be calculated using following formula::
+            T = 8.82 * 10^9 * Ct.
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: host
+      - const: isp
+
+  pinctrl-0: true
+  pinctrl-1: true
+  pinctrl-2: true
+
+required:
+  - compatible
+  - enset-gpios
+  - flen-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    // Ct = 220 nF, Rset = 160 kOhm
+    led-controller {
+        compatible = "skyworks,aat1290";
+        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default", "host", "isp";
+        pinctrl-0 = <&camera_flash_host>;
+        pinctrl-1 = <&camera_flash_host>;
+        pinctrl-2 = <&camera_flash_isp>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <520833>;
+            flash-max-microamp = <1012500>;
+            flash-max-timeout-us = <1940000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
new file mode 100644
index 0000000000..4b1575e4f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tca6507.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TCA6507 LED and GPIO controller
+
+maintainers:
+  - NeilBrown <neilb@suse.de>
+
+description:
+  The TCA6507 is a programmable LED controller connected via I2C that can drive
+  7 separate lines either by holding them low, or by pulsing them with modulated
+  width.
+
+properties:
+  compatible:
+    const: ti,tca6507
+
+  reg:
+    description: I2C slave address of the controller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names: true
+
+patternProperties:
+  "^led@[0-6]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+    required:
+      - reg
+
+  "^gpio@[0-6]$":
+    type: object
+
+    properties:
+      compatible:
+        const: gpio
+
+      reg:
+        minimum: 0
+        maximum: 6
+
+    additionalProperties: false
+
+    required:
+      - reg
+      - compatible
+
+if:
+  patternProperties:
+    "^gpio@[0-6]$":
+      type: object
+      properties:
+        compatible:
+          contains:
+            const: gpio
+then:
+  required:
+    - gpio-controller
+    - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@45 {
+            compatible = "ti,tca6507";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x45>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            gpio-line-names = "wifi_reset@6";
+
+            led@0 {
+                label = "gta04:red:aux";
+                reg = <0x0>;
+            };
+
+            led@1 {
+                label = "gta04:green:aux";
+                reg = <0x1>;
+            };
+
+            led@3 {
+                reg = <0x3>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "default-on";
+            };
+
+            led@4 {
+                color = <LED_COLOR_ID_GREEN>;
+                function = LED_FUNCTION_POWER;
+                reg = <0x4>;
+            };
+
+            gpio@6 {
+                compatible = "gpio";
+                reg = <0x6>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml
new file mode 100644
index 0000000000..89a1cde2b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/trigger-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trigger source providers
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each trigger source provider should be represented by a device tree node. It
+  may be e.g. a USB port or an Ethernet device.
+
+properties:
+  '#trigger-source-cells':
+    description:
+      Number of cells in a source trigger. Typically 0 for nodes of simple
+      trigger sources (e.g. a specific USB port).
+    enum: [ 0, 1 ]
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
new file mode 100644
index 0000000000..75d5d97305
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner sunxi Message Box
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description: |
+  The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a
+  two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt
+  is raised for received messages, but software must poll to know when a
+  transmitted message has been acknowledged by the remote user. Each FIFO can
+  hold four 32-bit messages; when a FIFO is full, clients must wait before
+  attempting more transmissions.
+
+  Refer to ./mailbox.txt for generic information about mailbox device-tree
+  bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-msgbox
+              - allwinner,sun8i-h3-msgbox
+              - allwinner,sun9i-a80-msgbox
+              - allwinner,sun50i-a64-msgbox
+              - allwinner,sun50i-h6-msgbox
+          - const: allwinner,sun6i-a31-msgbox
+      - const: allwinner,sun6i-a31-msgbox
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: bus clock
+
+  resets:
+    maxItems: 1
+    description: bus reset
+
+  interrupts:
+    maxItems: 1
+
+  '#mbox-cells':
+    const: 1
+    description: first cell is the channel number (0-7)
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    msgbox: mailbox@1c17000 {
+            compatible = "allwinner,sun8i-h3-msgbox",
+                         "allwinner,sun6i-a31-msgbox";
+            reg = <0x01c17000 0x1000>;
+            clocks = <&ccu CLK_BUS_MSGBOX>;
+            resets = <&ccu RST_BUS_MSGBOX>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            #mbox-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
new file mode 100644
index 0000000000..c4dd93f1fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
@@ -0,0 +1,48 @@
+Altera Mailbox Driver
+=====================
+
+Required properties:
+- compatible :	"altr,mailbox-1.0".
+- reg : 	physical base address of the mailbox and length of
+		memory mapped region.
+- #mbox-cells:	Common mailbox binding property to identify the number
+		of cells required for the mailbox specifier. Should be 1.
+
+Optional properties:
+- interrupts :		interrupt number. The interrupt specifier format
+			depends on the interrupt controller parent.
+
+Example:
+	mbox_tx: mailbox@100 {
+		compatible = "altr,mailbox-1.0";
+		reg = <0x100 0x8>;
+		interrupt-parent = < &gic_0 >;
+		interrupts = <5>;
+		#mbox-cells = <1>;
+	};
+
+	mbox_rx: mailbox@200 {
+		compatible = "altr,mailbox-1.0";
+		reg = <0x200 0x8>;
+		interrupt-parent = < &gic_0 >;
+		interrupts = <6>;
+		#mbox-cells = <1>;
+	};
+
+Mailbox client
+===============
+"mboxes" and the optional "mbox-names" (please see
+Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value
+of the mboxes property should contain a phandle to the mailbox controller
+device node and second argument is the channel index. It must be 0 (hardware
+support only one channel).The equivalent "mbox-names" property value can be
+used to give a name to the communication channel to be used by the client user.
+
+Example:
+	mclient0: mclient0@400 {
+		compatible = "client-1.0";
+		reg = <0x400 0x10>;
+		mbox-names = "mbox-tx", "mbox-rx";
+		mboxes = <&mbox_tx 0>,
+			 <&mbox_rx 0>;
+	};
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
new file mode 100644
index 0000000000..385809ed15
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Message-Handling-Unit Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller
+  that has 3 independent channels/links to communicate with remote processor(s).
+  MHU links are hardwired on a platform. A link raises interrupt for any
+  received data. However, there is no specified way of knowing if the sent
+  data has been read by the remote. This driver assumes the sender polls
+  STAT register and the remote clears it after having read the data.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxbb-mhu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    description:
+      Contains the interrupt information corresponding to each of the 3 links
+      of MHU.
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@c883c404 {
+          compatible = "amlogic,meson-gxbb-mhu";
+          reg = <0xc883c404 0x4c>;
+          interrupts = <208>, <209>, <210>;
+          #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
new file mode 100644
index 0000000000..4c0668e5f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/apple,mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mailbox Controller
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  The Apple mailbox consists of two FIFOs used to exchange 64+32 bit
+  messages between the main CPU and a co-processor. Multiple instances
+  of this mailbox can be found on Apple SoCs.
+  One of the two FIFOs is used to send data to a co-processor while the other
+  FIFO is used for the other direction.
+  Various clients implement different IPC protocols based on these simple
+  messages and shared memory buffers.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          ASC mailboxes are the most common variant found on the M1 used
+          for example for the display controller, the system management
+          controller and the NVMe coprocessor.
+        items:
+          - enum:
+              - apple,t8103-asc-mailbox
+              - apple,t8112-asc-mailbox
+              - apple,t6000-asc-mailbox
+          - const: apple,asc-mailbox-v4
+
+      - description:
+          M3 mailboxes are an older variant with a slightly different MMIO
+          interface still found on the M1. It is used for the Thunderbolt
+          co-processors.
+        items:
+          - enum:
+              - apple,t8103-m3-mailbox
+              - apple,t8112-m3-mailbox
+              - apple,t6000-m3-mailbox
+          - const: apple,m3-mailbox-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: send fifo is empty interrupt
+      - description: send fifo is not empty interrupt
+      - description: receive fifo is empty interrupt
+      - description: receive fifo is not empty interrupt
+
+  interrupt-names:
+    items:
+      - const: send-empty
+      - const: send-not-empty
+      - const: recv-empty
+      - const: recv-not-empty
+
+  "#mbox-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+        mailbox@77408000 {
+                compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+                reg = <0x77408000 0x4000>;
+                interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
+                interrupt-names = "send-empty", "send-not-empty",
+                 "recv-empty", "recv-not-empty";
+                #mbox-cells = <0>;
+        };
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
new file mode 100644
index 0000000000..d9a4f4a02d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHU Mailbox Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3
+  independent channels/links to communicate with remote processor(s).  MHU links
+  are hardwired on a platform. A link raises interrupt for any received data.
+  However, there is no specified way of knowing if the sent data has been read
+  by the remote. This driver assumes the sender polls STAT register and the
+  remote clears it after having read the data.  The last channel is specified to
+  be a 'Secure' resource, hence can't be used by Linux running NS.
+
+  The MHU hardware also allows operations in doorbell mode. The MHU drives the
+  interrupt signal using a 32-bit register, with all 32-bits logically ORed
+  together. It provides a set of registers to enable software to set, clear and
+  check the status of each of the bits of this register independently. The use
+  of 32 bits per interrupt line enables software to provide more information
+  about the source of the interrupt. For example, each bit of the register can
+  be associated with a type of event that can contribute to raising the
+  interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote
+  processor.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,mhu
+          - arm,mhu-doorbell
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Data transfer mode
+        items:
+          - const: arm,mhu
+          - const: arm,primecell
+
+      - description: Doorbell mode
+        items:
+          - const: arm,mhu-doorbell
+          - const: arm,primecell
+
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: low-priority non-secure
+      - description: high-priority non-secure
+      - description: Secure
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  '#mbox-cells':
+    description: |
+      Set to 1 in data transfer mode and represents index of the channel.
+      Set to 2 in doorbell mode and represents index of the channel and doorbell
+      number.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  # Data transfer mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuA: mailbox@2b1f0000 {
+            #mbox-cells = <1>;
+            compatible = "arm,mhu", "arm,primecell";
+            reg = <0 0x2b1f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+    };
+
+    firmware {
+        scpi {
+            compatible = "arm,scpi";
+            mboxes = <&mhuA 1>; /* HP-NonSecure */
+            shmem = <&cpu_scp_hpri>; /* HP-NonSecure */
+
+            scpi_devpd: power-controller {
+                compatible = "arm,scpi-power-domains";
+                num-domains = <2>;
+                #power-domain-cells = <1>;
+            };
+        };
+    };
+
+  # Doorbell mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuB: mailbox@2b2f0000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhu-doorbell", "arm,primecell";
+            reg = <0 0x2b2f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+    };
+
+    firmware {
+        scmi {
+            compatible = "arm,scmi";
+            mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */
+                     <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */
+            mbox-names = "tx", "rx";
+            shmem = <&cpu_scp_lpri0>,
+                    <&cpu_scp_lpri1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_devpd: protocol@11 {
+                reg = <0x11>;
+                #power-domain-cells = <1>;
+            };
+
+            scmi_dvfs: protocol@13 {
+                reg = <0x13>;
+                #clock-cells = <1>;
+
+                mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */
+                         <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */
+                mbox-names = "tx", "rx";
+                shmem = <&cpu_scp_hpri0>,
+                        <&cpu_scp_hpri1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
new file mode 100644
index 0000000000..a4f1fe6365
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHUv2 Mailbox Controller
+
+maintainers:
+  - Tushar Khandelwal <tushar.khandelwal@arm.com>
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has
+  between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional
+  communication with remote processor(s), where the number of channel windows
+  are implementation dependent.
+
+  Given the unidirectional nature of the controller, an MHUv2 mailbox may only
+  be written to or read from. If a pair of MHU controllers is implemented
+  between two processing elements to provide bidirectional communication, these
+  must be specified as two separate mailboxes.
+
+  If the interrupts property is present in device tree node, then its treated as
+  a "receiver" mailbox, otherwise a "sender".
+
+  An MHU controller must be specified along with the supported transport
+  protocols. The transport protocols determine the method of data transmission
+  as well as the number of provided mailbox channels.
+
+  Following are the possible transport protocols.
+
+  - Data-transfer: Each transfer is made of one or more words, using one or more
+    channel windows.
+
+  - Doorbell: Each transfer is made up of single bit flag, using any one of the
+    bits in a channel window. A channel window can support up to 32 doorbells
+    and the entire window shall be used in doorbell protocol.  Optionally, data
+    may be transmitted through a shared memory region, wherein the MHU is used
+    strictly as an interrupt generation mechanism but that is out of the scope
+    of these bindings.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,mhuv2-tx
+          - arm,mhuv2-rx
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Sender mode
+        items:
+          - const: arm,mhuv2-tx
+          - const: arm,primecell
+
+      - description: Receiver-mode
+        items:
+          - const: arm,mhuv2-rx
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The MHUv2 controller always implements an interrupt in the "receiver"
+      mode, while the interrupt in the "sender" mode was not available in the
+      version MHUv2.0, but the later versions do have it.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  arm,mhuv2-protocols:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      The MHUv2 controller may contain up to 124 channel windows (each 32-bit
+      wide). The hardware and the DT bindings allows any combination of those to
+      be used for various transport protocols.
+
+      This property allows a platform to describe how these channel windows are
+      used in various transport protocols. The entries in this property shall be
+      present as an array of tuples, where each tuple describes details about
+      one of the transport protocol being implemented over some channel
+      window(s).
+
+      The first field of a tuple signifies the transfer protocol, 0 is reserved
+      for doorbell protocol, and 1 is reserved for data-transfer protocol.
+      Using any other value in the first field of a tuple makes it invalid.
+
+      The second field of a tuple signifies the number of channel windows where
+      the protocol would be used and should be set to a non zero value. For
+      doorbell protocol this field signifies the number of 32-bit channel
+      windows that implement the doorbell protocol. For data-transfer protocol,
+      this field signifies the number of 32-bit channel windows that implement
+      the data-transfer protocol.
+
+      The total number of channel windows specified here shouldn't be more than
+      the ones implemented by the platform, though one can specify lesser number
+      of windows here than what the platform implements.
+
+      mhu: mailbox@2b1f0000 {
+          ...
+
+          arm,mhuv2-protocols = <0 2>, <1 1>, <1 5>, <1 7>;
+      }
+
+      The above example defines the protocols of an ARM MHUv2 mailbox
+      controller, where a total of 15 channel windows are used. The first two
+      windows are used in doorbell protocol (64 doorbells), followed by 1, 5 and
+      7 windows (separately) used in data-transfer protocol.
+
+    minItems: 1
+    maxItems: 124
+    items:
+      items:
+        - enum: [ 0, 1 ]
+        - minimum: 0
+          maximum: 124
+
+
+  '#mbox-cells':
+    description: |
+      It is always set to 2. The first argument in the consumers 'mboxes'
+      property represents the channel window group, which may be used in
+      doorbell, or data-transfer protocol, and the second argument (only
+      relevant in doorbell protocol, should be 0 otherwise) represents the
+      doorbell number within the 32 bit wide channel window.
+
+      From the example given above for arm,mhuv2-protocols, here is how a client
+      node can reference them.
+
+      mboxes = <&mhu 0 5>; // Channel Window Group 0, doorbell 5.
+      mboxes = <&mhu 1 7>; // Channel Window Group 1, doorbell 7.
+      mboxes = <&mhu 2 0>; // Channel Window Group 2, data transfer protocol with 1 window.
+      mboxes = <&mhu 3 0>; // Channel Window Group 3, data transfer protocol with 5 windows.
+      mboxes = <&mhu 4 0>; // Channel Window Group 4, data transfer protocol with 7 windows.
+
+    const: 2
+
+if:
+  # Interrupt is compulsory for receiver
+  properties:
+    compatible:
+      contains:
+        const: arm,mhuv2-rx
+then:
+  required:
+    - interrupts
+
+required:
+  - compatible
+  - reg
+  - '#mbox-cells'
+  - arm,mhuv2-protocols
+
+additionalProperties: false
+
+examples:
+  # Multiple transport protocols implemented by the mailbox controllers
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhu_tx: mailbox@2b1f0000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhuv2-tx", "arm,primecell";
+            reg = <0 0x2b1f0000 0 0x1000>;
+            clocks = <&clock 0>;
+            clock-names = "apb_pclk";
+            interrupts = <0 45 4>;
+            arm,mhuv2-protocols = <1 5>, <1 2>, <1 5>, <1 7>, <0 2>;
+        };
+
+        mhu_rx: mailbox@2b1f1000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhuv2-rx", "arm,primecell";
+            reg = <0 0x2b1f1000 0 0x1000>;
+            clocks = <&clock 0>;
+            clock-names = "apb_pclk";
+            interrupts = <0 46 4>;
+            arm,mhuv2-protocols = <1 1>, <1 7>, <0 2>;
+        };
+
+        mhu_client: dsp@596e8000 {
+            compatible = "fsl,imx8qxp-dsp";
+            reg = <0 0x596e8000 0 0x88000>;
+            clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>;
+            clock-names = "ipg", "ocram", "core";
+            power-domains = <&pd 0>, <&pd 1>, <&pd 2>, <&pd 3>;
+            mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
+            mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx
+                     <&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx
+                     <&mhu_rx 2 27>, //doorbell protocol channel 2, doorbell 27, mhu-rx
+                     <&mhu_rx 0 0>;  //data-transfer protocol with 1 window, mhu-rx
+            memory-region = <&dsp_reserved>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
new file mode 100644
index 0000000000..9588817f45
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 VideoCore mailbox IPC
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b880 {
+      compatible = "brcm,bcm2835-mbox";
+      reg = <0x7e00b880 0x40>;
+      interrupts = <0 1>;
+      #mbox-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
new file mode 100644
index 0000000000..c80065a1eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
@@ -0,0 +1,59 @@
+Broadcom FlexRM Ring Manager
+============================
+The Broadcom FlexRM ring manager provides a set of rings which can be
+used to submit work to offload engines. An SoC may have multiple FlexRM
+hardware blocks. There is one device tree entry per FlexRM block. The
+FlexRM driver will create a mailbox-controller instance for given FlexRM
+hardware block where each mailbox channel is a separate FlexRM ring.
+
+Required properties:
+--------------------
+- compatible:	Should be "brcm,iproc-flexrm-mbox"
+- reg:		Specifies base physical address and size of the FlexRM
+		ring registers
+- msi-parent:	Phandles (and potential Device IDs) to MSI controllers
+		The FlexRM engine will send MSIs (instead of wired
+		interrupts) to CPU. There is one MSI for each FlexRM ring.
+		Refer devicetree/bindings/interrupt-controller/msi.txt
+- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
+		channel. This should be 3.
+
+		The 1st cell is the mailbox channel number.
+
+		The 2nd cell contains MSI completion threshold. This is the
+		number of completion messages for which FlexRM will inject
+		one MSI interrupt to CPU.
+
+		The 3nd cell contains MSI timer value representing time for
+		which FlexRM will wait to accumulate N completion messages
+		where N is the value specified by 2nd cell above. If FlexRM
+		does not get required number of completion messages in time
+		specified by this cell then it will inject one MSI interrupt
+		to CPU provided at least one completion message is available.
+
+Optional properties:
+--------------------
+- dma-coherent:	Present if DMA operations made by the FlexRM engine (such
+		as DMA descriptor access, access to buffers pointed by DMA
+		descriptors and read/write pointer updates to DDR) are
+		cache coherent with the CPU.
+
+Example:
+--------
+crypto_mbox: mbox@67000000 {
+	compatible = "brcm,iproc-flexrm-mbox";
+	reg = <0x67000000 0x200000>;
+	msi-parent = <&gic_its 0x7f00>;
+	#mbox-cells = <3>;
+};
+
+crypto@672c0000 {
+	compatible = "brcm,spu2-v2-crypto";
+	reg = <0x672c0000 0x1000>;
+	mboxes = <&crypto_mbox 0 0x1 0xffff>,
+		 <&crypto_mbox 1 0x1 0xffff>,
+		 <&crypto_mbox 16 0x1 0xffff>,
+		 <&crypto_mbox 17 0x1 0xffff>,
+		 <&crypto_mbox 30 0x1 0xffff>,
+		 <&crypto_mbox 31 0x1 0xffff>;
+};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
new file mode 100644
index 0000000000..9bcdf20876
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
@@ -0,0 +1,25 @@
+The PDC driver manages data transfer to and from various offload engines
+on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is
+one device tree entry per block.  On some chips, the PDC functionality is
+handled by the FA2 (Northstar Plus).
+
+Required properties:
+- compatible : Should be "brcm,iproc-pdc-mbox" or "brcm,iproc-fa2-mbox" for
+  FA2/Northstar Plus.
+- reg: Should contain PDC registers location and length.
+- interrupts: Should contain the IRQ line for the PDC.
+- #mbox-cells: 1
+- brcm,rx-status-len: Length of metadata preceding received frames, in bytes.
+
+Optional properties:
+- brcm,use-bcm-hdr:  present if a BCM header precedes each frame.
+
+Example:
+	pdc0: iproc-pdc0@612c0000 {
+		compatible = "brcm,iproc-pdc-mbox";
+		reg = <0 0x612c0000 0 0x445>;  /* PDC FS0 regs */
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;   /* one cell per mailbox channel */
+		brcm,rx-status-len = <32>;
+		brcm,use-bcm-hdr;
+	};
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
new file mode 100644
index 0000000000..191c1ce150
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Messaging Unit (MU)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor to signal the other processor using interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-facing, Processor B-facing).
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx6sx-mu
+      - const: fsl,imx7ulp-mu
+      - const: fsl,imx8ulp-mu
+      - const: fsl,imx8-mu-scu
+      - const: fsl,imx8-mu-seco
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx8ulp-mu-s4
+      - items:
+          - const: fsl,imx93-mu
+          - const: fsl,imx8ulp-mu
+      - items:
+          - enum:
+              - fsl,imx7s-mu
+              - fsl,imx8mq-mu
+              - fsl,imx8mm-mu
+              - fsl,imx8mn-mu
+              - fsl,imx8mp-mu
+              - fsl,imx8qm-mu
+              - fsl,imx8qxp-mu
+          - const: fsl,imx6sx-mu
+      - description: To communicate with i.MX8 SCU with fast IPC
+        items:
+          - const: fsl,imx8-mu-scu
+          - enum:
+              - fsl,imx8qm-mu
+              - fsl,imx8qxp-mu
+          - const: fsl,imx6sx-mu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
+
+  "#mbox-cells":
+    description: |
+      <&phandle type channel>
+      phandle   : Label name of controller
+      type      : Channel type
+      channel   : Channel number
+
+      This MU support 5 type of unidirectional channels, each type
+      has 4 channels except RST channel which only has 1 channel.
+      A total of 17 channels.  Following types are
+      supported:
+      0 - TX channel with 32bit transmit register and IRQ transmit
+          acknowledgment support.
+      1 - RX channel with 32bit receive register and IRQ support
+      2 - TX doorbell channel. Without own register and no ACK support.
+      3 - RX doorbell channel.
+      4 - RST channel
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  fsl,mu-side-b:
+    description: boolean, if present, means it is for side B MU.
+    type: boolean
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx93-mu-s4
+    then:
+      properties:
+        interrupt-names:
+          minItems: 2
+        interrupts:
+          minItems: 2
+
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      not:
+        required:
+          - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@5d1b0000 {
+        compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+        reg = <0x5d1b0000 0x10000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
new file mode 100644
index 0000000000..3e5b453740
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt
@@ -0,0 +1,51 @@
+Hisilicon Hi3660 Mailbox Controller
+
+Hisilicon Hi3660 mailbox controller supports up to 32 channels.  Messages
+are passed between processors, including application & communication
+processors, MCU, HIFI, etc.  Each channel is unidirectional and accessed
+by using MMIO registers; it supports maximum to 8 words message.
+
+Controller
+----------
+
+Required properties:
+- compatible:		: Shall be "hisilicon,hi3660-mbox"
+- reg:			: Offset and length of the device's register set
+- #mbox-cells:		: Must be 3
+			  <&phandle channel dst_irq ack_irq>
+			    phandle	: Label name of controller
+			    channel	: Channel number
+			    dst_irq	: Remote interrupt vector
+			    ack_irq	: Local interrupt vector
+
+- interrupts:		: Contains the two IRQ lines for mailbox.
+
+Example:
+
+mailbox: mailbox@e896b000 {
+	compatible = "hisilicon,hi3660-mbox";
+	reg = <0x0 0xe896b000 0x0 0x1000>;
+	interrupts = <0x0 0xc0 0x4>,
+		     <0x0 0xc1 0x4>;
+	#mbox-cells = <3>;
+};
+
+Client
+------
+
+Required properties:
+- compatible		: See the client docs
+- mboxes		: Standard property to specify a Mailbox (See ./mailbox.txt)
+			  Cells must match 'mbox-cells' (See Controller docs above)
+
+Optional properties
+- mbox-names		: Name given to channels seen in the 'mboxes' property.
+
+Example:
+
+stub_clock: stub_clock@e896b500 {
+	compatible = "hisilicon,hi3660-stub-clk";
+	reg = <0x0 0xe896b500 0x0 0x0100>;
+	#clock-cells = <1>;
+	mboxes = <&mailbox 13 3 0>;
+};
diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt
new file mode 100644
index 0000000000..044b17f3a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt
@@ -0,0 +1,74 @@
+Hisilicon Hi6220 Mailbox Driver
+===============================
+
+Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel
+is unidirectional with a maximum message size of 8 words. I/O is
+performed using register access (there is no DMA) and the cell
+raises an interrupt when messages are received.
+
+Mailbox Device Node:
+====================
+
+Required properties:
+--------------------
+- compatible:		Shall be "hisilicon,hi6220-mbox"
+- reg:			Contains the mailbox register address range (base
+			address and length); the first item is for IPC
+			registers, the second item is shared buffer for
+			slots.
+- #mbox-cells:		Common mailbox binding property to identify the number
+			of cells required for the mailbox specifier. Must be 3.
+			<&phandle slot_id dst_irq ack_irq>
+			  phandle: Label name of mailbox controller
+			  slot_id: Slot id used either for TX or RX
+			  dst_irq: IRQ identifier index number which used by MCU
+			  ack_irq: IRQ identifier index number with generating a
+			           TX/RX interrupt to application processor,
+				   mailbox driver uses it to acknowledge interrupt
+- interrupts:		Contains the interrupt information for the mailbox
+			device. The format is dependent on which interrupt
+			controller the SoCs use.
+
+Optional Properties:
+--------------------
+- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver
+			use this flag to ask MCU to enable "automatic idle
+			flag" mode or IRQ generated mode to acknowledge a TX
+			completion.
+
+Example:
+--------
+
+	mailbox: mailbox@f7510000 {
+		compatible = "hisilicon,hi6220-mbox";
+		reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
+		      <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <3>;
+	};
+
+
+Mailbox client
+===============
+
+Required properties:
+--------------------
+- compatible:		Many (See the client docs).
+- mboxes:		Standard property to specify a Mailbox (See ./mailbox.txt)
+			Cells must match 'mbox-cells' (See Mailbox Device Node above).
+
+Optional Properties:
+--------------------
+- mbox-names:		Name given to channels seen in the 'mboxes' property.
+
+Example:
+--------
+
+	stub_clock: stub_clock {
+		compatible = "hisilicon,hi6220-stub-clk";
+		hisilicon,hi6220-clk-sram = <&sram>;
+		#clock-cells = <1>;
+		mbox-names = "mbox-tx", "mbox-rx";
+		mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>;
+	};
diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt
new file mode 100644
index 0000000000..af8ecee2ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt
@@ -0,0 +1,60 @@
+* Generic Mailbox Controller and client driver bindings
+
+Generic binding to provide a way for Mailbox controller drivers to
+assign appropriate mailbox channel to client drivers.
+
+* Mailbox Controller
+
+Required property:
+- #mbox-cells: Must be at least 1. Number of cells in a mailbox
+		specifier.
+
+Example:
+	mailbox: mailbox {
+		...
+		#mbox-cells = <1>;
+	};
+
+
+* Mailbox Client
+
+Required property:
+- mboxes: List of phandle and mailbox channel specifiers.
+
+Optional property:
+- mbox-names: List of identifier strings for each mailbox channel.
+- shmem : List of phandle pointing to the shared memory(SHM) area between the
+	  users of these mailboxes for IPC, one for each mailbox. This shared
+	  memory can be part of any memory reserved for the purpose of this
+	  communication between the mailbox client and the remote.
+
+
+Example:
+	pwr_cntrl: power {
+		...
+		mbox-names = "pwr-ctrl", "rpc";
+		mboxes = <&mailbox 0 &mailbox 1>;
+	};
+
+Example with shared memory(shmem):
+
+	sram: sram@50000000 {
+		compatible = "mmio-sram";
+		reg = <0x50000000 0x10000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x50000000 0x10000>;
+
+		cl_shmem: shmem@0 {
+			compatible = "client-shmem";
+			reg = <0x0 0x200>;
+		};
+	};
+
+	client@2e000000 {
+		...
+		mboxes = <&mailbox 0>;
+		shmem = <&cl_shmem>;
+		..
+	};
diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt
new file mode 100644
index 0000000000..282ab81a4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt
@@ -0,0 +1,16 @@
+* rWTM BIU Mailbox driver for Armada 37xx
+
+Required properties:
+- compatible:	must be "marvell,armada-3700-rwtm-mailbox"
+- reg:		physical base address of the mailbox and length of memory mapped
+		region
+- interrupts:	the IRQ line for the mailbox
+- #mbox-cells:	must be 1
+
+Example:
+	rwtm: mailbox@b0000 {
+		compatible = "marvell,armada-3700-rwtm-mailbox";
+		reg = <0xb0000 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
new file mode 100644
index 0000000000..cef9d76013
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Global Command Engine Mailbox
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is used to help read/write registers with
+  critical time limitation, such as updating display configuration during the
+  vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6779-gce
+          - mediatek,mt8173-gce
+          - mediatek,mt8183-gce
+          - mediatek,mt8186-gce
+          - mediatek,mt8188-gce
+          - mediatek,mt8192-gce
+          - mediatek,mt8195-gce
+      - items:
+          - const: mediatek,mt6795-gce
+          - const: mediatek,mt8173-gce
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell describes the Thread ID of the GCE,
+      the second cell describes the priority of the GCE thread
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Global Command Engine clock
+
+  clock-names:
+    items:
+      - const: gce
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-gce
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gce: mailbox@10212000 {
+            compatible = "mediatek,mt8173-gce";
+            reg = <0 0x10212000 0 0x1000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+            #mbox-cells = <2>;
+            clocks = <&infracfg CLK_INFRA_GCE>;
+            clock-names = "gce";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
new file mode 100644
index 0000000000..404477910f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    const: microchip,mpfs-mailbox
+
+  reg:
+    oneOf:
+      - items:
+          - description: mailbox control & data registers
+          - description: mailbox interrupt registers
+        deprecated: true
+      - items:
+          - description: mailbox control registers
+          - description: mailbox interrupt registers
+          - description: mailbox data registers
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mbox: mailbox@37020000 {
+        compatible = "microchip,mpfs-mailbox";
+        reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+              <0x0 0x37020800 0x0 0x100>;
+        interrupt-parent = <&L1>;
+        interrupts = <96>;
+        #mbox-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
new file mode 100644
index 0000000000..72c1d9e82c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ADSP mailbox
+
+maintainers:
+  - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
+
+description: |
+  The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC
+  to communicate with ADSP by passing messages through two mailbox channels.
+  The MTK ADSP mailbox IPC also provides the ability for one processor to
+  signal the other processor using interrupts.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-adsp-mbox
+      - mediatek,mt8186-adsp-mbox
+
+  "#mbox-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    adsp_mailbox0:mailbox@10816000 {
+        compatible = "mediatek,mt8195-adsp-mbox";
+        #mbox-cells = <0>;
+        reg = <0x10816000 0x1000>;
+        interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
new file mode 100644
index 0000000000..2d14fc9489
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The HSP modules are used for the processors to share resources and
+  communicate together. It provides a set of hardware synchronization
+  primitives for interprocessor communication. So the interprocessor
+  communication (IPC) protocols can use hardware synchronization
+  primitives, when operating between two processors not in an SMP
+  relationship.
+
+  The features that HSP supported are shared mailboxes, shared
+  semaphores, arbitrated semaphores and doorbells.
+
+  The mbox specifier of the "mboxes" property in the client node should
+  contain two cells. The first cell determines the HSP type and the
+  second cell is used to identify the mailbox that the client is going
+  to use.
+
+  For shared mailboxes, the first cell composed of two fields:
+    - bits 15..8:
+        A bit mask of flags that further specifies the type of shared
+        mailbox to be used (based on the data size). If no flag is
+        specified then, 32-bit shared mailbox is used.
+    - bits 7..0:
+        Defines the type of the mailbox to be used. This field should be
+        TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes.
+
+  For doorbells, the second cell specifies the index of the doorbell to
+  use.
+
+  For shared mailboxes, the second cell is composed of two fields:
+    - bits 31..24:
+        A bit mask of flags that further specify how the shared mailbox
+        will be used. Valid flags are:
+          - bit 31:
+              Defines the direction of the mailbox. If set, the mailbox
+              will be used as a producer (i.e. used to send data). If
+              cleared, the mailbox is the consumer of data sent by a
+              producer.
+
+    - bits 23..0:
+        The index of the shared mailbox to use. The number of available
+        mailboxes may vary by instance of the HSP block and SoC
+        generation.
+
+    The following file contains definitions that can be used to
+    construct mailbox specifiers:
+
+        <dt-bindings/mailbox/tegra186-hsp.h>
+
+properties:
+  $nodename:
+    pattern: "^hsp@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-hsp
+      - const: nvidia,tegra194-hsp
+      - const: nvidia,tegra264-hsp
+      - items:
+          - const: nvidia,tegra234-hsp
+          - const: nvidia,tegra194-hsp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    oneOf:
+      # shared interrupts are optional
+      - items:
+          - const: doorbell
+
+      - items:
+          - const: doorbell
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+      - items:
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+  "#mbox-cells":
+    const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    client {
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_CCPLEX>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
new file mode 100644
index 0000000000..d2e25ff6db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APCS global block
+
+description:
+  This binding describes the APCS "global" block found in various Qualcomm
+  platforms.
+
+maintainers:
+  - Jassi Brar <jassisinghbrar@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq5018-apcs-apps-global
+              - qcom,ipq5332-apcs-apps-global
+              - qcom,ipq8074-apcs-apps-global
+              - qcom,ipq9574-apcs-apps-global
+          - const: qcom,ipq6018-apcs-apps-global
+      - items:
+          - enum:
+              - qcom,sc7180-apss-shared
+              - qcom,sc8180x-apss-shared
+              - qcom,sm8150-apss-shared
+          - const: qcom,sdm845-apss-shared
+      - items:
+          - enum:
+              - qcom,msm8916-apcs-kpss-global
+              - qcom,msm8939-apcs-kpss-global
+              - qcom,msm8953-apcs-kpss-global
+              - qcom,msm8976-apcs-kpss-global
+              - qcom,msm8994-apcs-kpss-global
+              - qcom,qcs404-apcs-apps-global
+              - qcom,sdx55-apcs-gcc
+          - const: syscon
+      - enum:
+          - qcom,ipq6018-apcs-apps-global
+          - qcom,ipq8074-apcs-apps-global
+          - qcom,msm8996-apcs-hmss-global
+          - qcom,msm8998-apcs-hmss-global
+          - qcom,qcm2290-apcs-hmss-global
+          - qcom,sdm660-apcs-hmss-global
+          - qcom,sdm845-apss-shared
+          - qcom,sm4250-apcs-hmss-global
+          - qcom,sm6115-apcs-hmss-global
+          - qcom,sm6125-apcs-hmss-global
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: phandles to the parent clocks of the clock driver
+    minItems: 2
+    maxItems: 3
+
+  '#mbox-cells':
+    const: 1
+
+  '#clock-cells':
+    enum: [0, 1]
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - '#mbox-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,msm8916-apcs-kpss-global
+            - qcom,msm8939-apcs-kpss-global
+            - qcom,qcs404-apcs-apps-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-apcs-gcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: ref
+            - const: pll
+            - const: aux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-apcs-apps-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: XO clock
+        clock-names:
+          items:
+            - const: pll
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,msm8953-apcs-kpss-global
+            - qcom,msm8976-apcs-kpss-global
+            - qcom,msm8994-apcs-kpss-global
+            - qcom,msm8996-apcs-hmss-global
+            - qcom,msm8998-apcs-hmss-global
+            - qcom,qcm2290-apcs-hmss-global
+            - qcom,sdm660-apcs-hmss-global
+            - qcom,sdm845-apss-shared
+            - qcom,sm4250-apcs-hmss-global
+            - qcom,sm6115-apcs-hmss-global
+            - qcom,sm6125-apcs-hmss-global
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-apcs-apps-global
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+    else:
+      properties:
+        '#clock-cells':
+          const: 0
+
+examples:
+
+  # Example apcs with msm8996
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    apcs_glb: mailbox@9820000 {
+        compatible = "qcom,msm8996-apcs-hmss-global";
+        reg = <0x9820000 0x1000>;
+
+        #mbox-cells = <1>;
+        #clock-cells = <0>;
+    };
+
+    rpm-glink {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+        mboxes = <&apcs_glb 0>;
+    };
+
+  # Example apcs with qcs404
+  - |
+    #define GCC_APSS_AHB_CLK_SRC  1
+    #define GCC_GPLL0_AO_OUT_MAIN 123
+    apcs: mailbox@b011000 {
+        compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+        reg = <0x0b011000 0x1000>;
+        #mbox-cells = <1>;
+        clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+        clock-names = "pll", "aux";
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
new file mode 100644
index 0000000000..cc6f66eccc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  The Inter-Processor Communication Controller (IPCC) is a centralized hardware
+  to route interrupts across various subsystems. It involves a three-level
+  addressing scheme called protocol, client and signal. For example, consider an
+  entity on the Application Processor Subsystem (APSS) that wants to listen to
+  Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
+  a case, the client would be Modem (client-id is 2) and the signal would be
+  SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
+  protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h
+  for the list of such IDs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qdu1000-ipcc
+          - qcom,sa8775p-ipcc
+          - qcom,sc7280-ipcc
+          - qcom,sc8280xp-ipcc
+          - qcom,sm6350-ipcc
+          - qcom,sm6375-ipcc
+          - qcom,sm8250-ipcc
+          - qcom,sm8350-ipcc
+          - qcom,sm8450-ipcc
+          - qcom,sm8550-ipcc
+      - const: qcom,ipcc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description:
+      The first cell is the client-id, the second cell is the signal-id and the
+      third cell is the interrupt type.
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell is the client-id, and the second cell is the signal-id.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    mailbox@408000 {
+        compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+        reg = <0x408000 0x1000>;
+        interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt
new file mode 100644
index 0000000000..b6bb84acf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt
@@ -0,0 +1,32 @@
+Rockchip mailbox
+
+The Rockchip mailbox is used by the Rockchip CPU cores to communicate
+requests to MCU processor.
+
+Refer to ./mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Required properties:
+
+ - compatible: should be one of the following.
+   - "rockchip,rk3368-mbox" for rk3368
+ - reg: physical base address of the controller and length of memory mapped
+	region.
+ - interrupts: The interrupt number to the cpu. The interrupt specifier format
+	depends on the interrupt controller.
+ - #mbox-cells: Common mailbox binding property to identify the number
+	of cells required for the mailbox specifier. Should be 1
+
+Example:
+--------
+
+/* RK3368 */
+mbox: mbox@ff6b0000 {
+	compatible = "rockchip,rk3368-mailbox";
+	reg = <0x0 0xff6b0000 0x0 0x1000>,
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+	#mbox-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
new file mode 100644
index 0000000000..b526f9c0c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum mailbox controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-mailbox
+      - sprd,sc9863a-mailbox
+
+  reg:
+    items:
+      - description: inbox registers' base address
+      - description: outbox registers' base address
+
+  interrupts:
+    minItems: 2
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: inbox
+      - const: outbox
+      - const: supp-outbox
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: enable
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#mbox-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox: mailbox@400a0000 {
+      compatible = "sprd,sc9860-mailbox";
+      reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>;
+      #mbox-cells = <1>;
+      clock-names = "enable";
+      clocks = <&aon_gate 53>;
+      interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "inbox", "outbox";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml
new file mode 100644
index 0000000000..a023c28dff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/st,sti-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Mailbox Driver for STi platform
+
+description:
+  Each ST Mailbox IP currently consists of 4 instances of 32 channels.
+  Messages are passed between Application and Remote processors using
+  shared memory.
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stih407-mailbox
+
+  reg:
+    maxItems: 1
+
+  mbox-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: name of the mailbox IP
+
+  interrupts:
+    description: the irq line for the RX mailbox
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox0: mailbox@8f00000  {
+        compatible = "st,stih407-mailbox";
+        reg = <0x8f00000 0x1000>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+        mbox-name = "a9";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
new file mode 100644
index 0000000000..134fd223a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 IPC controller
+
+description:
+  The IPCC block provides a non blocking signaling mechanism to post and
+  retrieve messages in an atomic way between two processors.
+  It provides the signaling for N bidirectionnal channels. The number of
+  channels (N) can be read from a dedicated register.
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-ipcc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: rx channel occupied
+      - description: tx channel free
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  wakeup-source: true
+
+  "#mbox-cells":
+    const: 1
+
+  st,proc-id:
+    description: Processor id using the mailbox (0 or 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - st,proc-id
+  - clocks
+  - interrupt-names
+  - "#mbox-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    ipcc: mailbox@4c001000 {
+      compatible = "st,stm32mp1-ipcc";
+      #mbox-cells = <1>;
+      reg = <0x4c001000 0x400>;
+      st,proc-id = <0>;
+      interrupts-extended = <&exti 61 1>,
+                            <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "rx", "tx";
+      clocks = <&rcc_clk IPCC>;
+      wakeup-source;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
new file mode 100644
index 0000000000..ebf0e3710c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt
@@ -0,0 +1,50 @@
+Texas Instruments' Message Manager Driver
+========================================
+
+The Texas Instruments' Message Manager is a mailbox controller that has
+configurable queues selectable at SoC(System on Chip) integration. The Message
+manager is broken up into queues in different address regions that are called
+"proxies" - each instance is unidirectional and is instantiated at SoC
+integration level to indicate receive or transmit path.
+
+Message Manager Device Node:
+===========================
+Required properties:
+--------------------
+- compatible:		Shall be: "ti,k2g-message-manager"
+- reg-names 		queue_proxy_region - Map the queue proxy region.
+			queue_state_debug_region - Map the queue state debug
+			region.
+- reg:			Contains the register map per reg-names.
+- #mbox-cells		Shall be 2. Contains the queue ID and proxy ID in that
+		        order referring to the transfer path.
+- interrupt-names:	Contains interrupt names matching the rx transfer path
+			for a given SoC. Receive interrupts shall be of the
+			format: "rx_<QID>".
+			For ti,k2g-message-manager, this shall contain:
+				"rx_005", "rx_057"
+- interrupts:		Contains the interrupt information corresponding to
+			interrupt-names property.
+
+Example(K2G):
+------------
+
+	msgmgr: msgmgr@2a00000 {
+		compatible = "ti,k2g-message-manager";
+		#mbox-cells = <2>;
+		reg-names = "queue_proxy_region", "queue_state_debug_region";
+		reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+		interrupt-names = "rx_005", "rx_057";
+		interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmmc: pmmc {
+		[...]
+		mbox-names = "rx", "tx";
+		# RX queue ID is 5, proxy ID is 2
+		# TX queue ID is 0, proxy ID is 0
+		mboxes= <&msgmgr 5 2>,
+			<&msgmgr 0 0>;
+		[...]
+	};
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
new file mode 100644
index 0000000000..1a2001e588
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP2+ and K3 Mailbox devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The OMAP Mailbox hardware facilitates communication between different
+  processors using a queued mailbox interrupt mechanism. The IP block is
+  external to the various processor subsystems and is connected on an
+  interconnect bus. The communication is achieved through a set of registers
+  for message storage and interrupt configuration registers.
+
+  Each mailbox IP block/cluster has a certain number of h/w fifo queues and
+  output interrupt lines. An output interrupt line is routed to an interrupt
+  controller within a processor subsystem, and there can be more than one line
+  going to a specific processor's interrupt controller. The interrupt line
+  connections are fixed for an instance and are dictated by the IP integration
+  into the SoC (excluding the SoCs that have an Interrupt Crossbar or an
+  Interrupt Router IP). Each interrupt line is programmable through a set of
+  interrupt configuration registers, and have a rx and tx interrupt source per
+  h/w fifo. Communication between different processors is achieved through the
+  appropriate programming of the rx and tx interrupt sources on the appropriate
+  interrupt lines.
+
+  The number of h/w fifo queues and interrupt lines dictate the usable
+  registers. All the current OMAP SoCs except for the newest DRA7xx SoC has a
+  single IP instance. DRA7xx has multiple instances with different number of
+  h/w fifo queues and interrupt lines between different instances. The interrupt
+  lines can also be routed to different processor sub-systems on DRA7xx as they
+  are routed through the Crossbar, a kind of interrupt router/multiplexer. The
+  K3 AM65x, J721E and J7200 SoCs has each of these instances form a cluster and
+  combine multiple clusters into a single IP block present within the Main
+  NavSS. The interrupt lines from all these clusters are multiplexed and routed
+  to different processor subsystems over a limited number of common interrupt
+  output lines of an Interrupt Router. The AM64x SoCS also uses a single IP
+  block comprising of multiple clusters, but the number of clusters are
+  smaller, and the interrupt output lines are connected directly to various
+  processors.
+
+  Mailbox Controller Nodes
+  =========================
+  A Mailbox device node is used to represent a Mailbox IP instance/cluster
+  within a SoC. The sub-mailboxes (actual communication channels) are
+  represented as child nodes of this parent node.
+
+  Mailbox Users
+  ==============
+  A device needing to communicate with a target processor device should specify
+  them using the common mailbox binding properties, "mboxes" and the optional
+  "mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt
+  for details). Each value of the mboxes property should contain a phandle to
+  the mailbox controller device node and an args specifier that will be the
+  phandle to the intended sub-mailbox child node to be used for communication.
+  The equivalent "mbox-names" property value can be used to give a name to the
+  communication channel to be used by the client user.
+
+$defs:
+  omap-mbox-descriptor:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      The omap-mbox-descriptor is made of up of 3 cells and represents a single
+      uni-directional communication channel. A typical sub-mailbox device uses
+      two such channels - one for transmitting (Tx) and one for receiving (Rx).
+    items:
+      - description:
+          mailbox fifo id used either for transmitting on ti,mbox-tx channel or
+          for receiving on ti,mbox-rx channel (fifo_id). This is the hardware
+          fifo number within a mailbox cluster.
+      - description:
+          irq identifier index number to use from the parent's interrupts data.
+          Should be 0 for most of the cases, a positive index value is seen only
+          on mailboxes that have multiple interrupt lines connected to the MPU
+          processor (irq_id). This is an index number in the listed interrupts
+          property in the DT nodes.
+      - description:
+          mailbox user id for identifying the interrupt line associated with
+          generating a tx/rx fifo interrupt (usr_id). This is the hardware
+          user id number within a mailbox cluster.
+
+  omap-sub-mailbox:
+    type: object
+    description:
+      The omap-sub-mailbox is a child node within a Mailbox controller device
+      node and represents the actual communication channel used to send and
+      receive messages between the host processor and a remote processor. Each
+      child node should have a unique node name across all the different mailbox
+      device nodes.
+
+    properties:
+      ti,mbox-tx:
+        $ref: "#/$defs/omap-mbox-descriptor"
+        description: sub-mailbox descriptor property defining a Tx fifo.
+
+      ti,mbox-rx:
+        $ref: "#/$defs/omap-mbox-descriptor"
+        description: sub-mailbox descriptor property defining a Rx fifo.
+
+      ti,mbox-send-noirq:
+        type: boolean
+        description:
+          Quirk flag to allow the client user of this sub-mailbox to send
+          messages without triggering a Tx ready interrupt, and to control
+          the Tx ticker. Should be used only on sub-mailboxes used to
+          communicate with WkupM3 remote processor on AM33xx/AM43xx SoCs.
+
+    required:
+      - ti,mbox-tx
+      - ti,mbox-rx
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-mailbox # for OMAP2420, OMAP2430 SoCs
+      - ti,omap3-mailbox # for OMAP3430, OMAP3630 SoCs
+      - ti,omap4-mailbox # for OMAP44xx, OMAP54xx, AM33xx, AM43xx and DRA7xx SoCs
+      - ti,am654-mailbox # for K3 AM65x, J721E and J7200 SoCs
+      - ti,am64-mailbox  # for K3 AM64x SoCs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Contains the interrupt information for the mailbox device. The format is
+      dependent on which interrupt controller the Mailbox device uses. The
+      number of interrupts listed will at most be the value specified in
+      ti,mbox-num-users property, but is usually limited by the number of
+      interrupts reaching the main processor. An interrupt-parent property
+      is required on SoCs where the interrupt lines are connected through a
+      Interrupt Router before reaching the main processor's GIC.
+
+  "#mbox-cells":
+    const: 1
+    description:
+      The specifier is a phandle to an omap-sub-mailbox device.
+
+  ti,mbox-num-users:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of targets (processor devices) that the mailbox device can
+      interrupt.
+
+  ti,mbox-num-fifos:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of h/w fifo queues within the mailbox IP block.
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+    description:
+      Name of the hwmod associated with the mailbox. This should be defined
+      in the mailbox node only if the node is not defined as a child node of
+      a corresponding sysc interconnect node.
+
+      This property is only needed on some legacy OMAP SoCs which have not
+      yet been converted to the ti,sysc interconnect hierarchy, but is
+      otherwise considered obsolete.
+
+patternProperties:
+  "^mbox-[a-z0-9-]+$":
+    $ref: "#/$defs/omap-sub-mailbox"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+  - ti,mbox-num-users
+  - ti,mbox-num-fifos
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am654-mailbox
+            - ti,am64-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          const: 4
+        ti,mbox-num-fifos:
+          const: 16
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap4-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          enum: [3, 4]
+        ti,mbox-num-fifos:
+          enum: [8, 12]
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap3-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          const: 2
+        ti,mbox-num-fifos:
+          const: 2
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap2-mailbox
+    then:
+      properties:
+        ti,mbox-num-users:
+          const: 4
+        ti,mbox-num-fifos:
+          const: 6
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    /* OMAP4 */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox: mailbox@4a0f4000 {
+        compatible = "ti,omap4-mailbox";
+        reg = <0x4a0f4000 0x200>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+        ti,mbox-num-users = <3>;
+        ti,mbox-num-fifos = <8>;
+
+        mbox_ipu: mbox-ipu {
+            ti,mbox-tx = <0 0 0>;
+            ti,mbox-rx = <1 0 0>;
+        };
+        mbox_dsp: mbox-dsp {
+            ti,mbox-tx = <3 0 0>;
+            ti,mbox-rx = <2 0 0>;
+        };
+    };
+
+    dsp {
+        mboxes = <&mailbox &mbox_dsp>;
+    };
+
+  - |
+    /* AM33xx */
+    mailbox1: mailbox@480c8000 {
+        compatible = "ti,omap4-mailbox";
+        reg = <0x480c8000 0x200>;
+        interrupts = <77>;
+        #mbox-cells = <1>;
+        ti,mbox-num-users = <4>;
+        ti,mbox-num-fifos = <8>;
+
+        mbox_wkupm3: mbox-wkup-m3 {
+            ti,mbox-tx = <0 0 0>;
+            ti,mbox-rx = <0 0 3>;
+            ti,mbox-send-noirq;
+        };
+    };
+
+  - |
+    /* AM65x */
+    mailbox0_cluster0: mailbox@31f80000 {
+        compatible = "ti,am654-mailbox";
+        reg = <0x31f80000 0x200>;
+        #mbox-cells = <1>;
+        ti,mbox-num-users = <4>;
+        ti,mbox-num-fifos = <16>;
+        interrupt-parent = <&intr_main_navss>;
+        interrupts = <436>;
+
+        mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+            ti,mbox-tx = <1 0 0>;
+            ti,mbox-rx = <0 0 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
new file mode 100644
index 0000000000..eea8228618
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/ti,secure-proxy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' Secure Proxy
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  The Texas Instruments' secure proxy is a mailbox controller that has
+  configurable queues selectable at SoC(System on Chip) integration. The
+  Message manager is broken up into different address regions that are
+  called "threads" or "proxies" - each instance is unidirectional and is
+  instantiated at SoC integration level by system controller to indicate
+  receive or transmit path.
+
+properties:
+  $nodename:
+    pattern: "^mailbox@[0-9a-f]+$"
+
+  compatible:
+    const: ti,am654-secure-proxy
+
+  "#mbox-cells":
+    const: 1
+    description:
+      Contains the secure proxy thread ID used for the specific transfer path.
+
+  reg-names:
+    items:
+      - const: target_data
+      - const: rt
+      - const: scfg
+
+  reg:
+    minItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 100
+    items:
+      pattern: "^rx_[0-9]{3}$"
+    description:
+      Contains the interrupt name information for the Rx interrupt path for
+      secure proxy thread in the form 'rx_<PID>'.
+
+  interrupts:
+    minItems: 1
+    maxItems: 100
+    description:
+      Contains the interrupt information for the Rx interrupt path for secure
+      proxy.
+
+required:
+  - compatible
+  - reg-names
+  - reg
+  - interrupt-names
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    secure_proxy: mailbox@32c00000 {
+          compatible = "ti,am654-secure-proxy";
+          #mbox-cells = <1>;
+          reg-names = "target_data", "rt", "scfg";
+          reg = <0x32c00000 0x100000>,
+                <0x32400000 0x100000>,
+                <0x32800000 0x100000>;
+          interrupt-names = "rx_011";
+          interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
new file mode 100644
index 0000000000..e46451bb24
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
@@ -0,0 +1,35 @@
+The APM X-Gene SLIMpro mailbox is used to communicate messages between
+the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple
+interrupt based door bell mechanism and can exchange simple messages using the
+internal registers.
+
+There are total of 8 interrupts in this mailbox. Each used for an individual
+door bell (or mailbox channel).
+
+Required properties:
+- compatible:	Should be as "apm,xgene-slimpro-mbox".
+
+- reg:		Contains the mailbox register address range.
+
+- interrupts:	8 interrupts must be from 0 to 7, interrupt 0 define the
+		the interrupt for mailbox channel 0 and interrupt 1 for
+		mailbox channel 1 and so likewise for the reminder.
+
+- #mbox-cells:	only one to specify the mailbox channel number.
+
+Example:
+
+Mailbox Node:
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0xa000>;
+			#mbox-cells = <1>;
+			interrupts =  	<0x0 0x0 0x4>,
+					<0x0 0x1 0x4>,
+					<0x0 0x2 0x4>,
+					<0x0 0x3 0x4>,
+					<0x0 0x4 0x4>,
+					<0x0 0x5 0x4>,
+					<0x0 0x6 0x4>,
+					<0x0 0x7 0x4>,
+		};
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 0000000000..aeaddbf574
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+  The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+  messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+  agent owns registers used for notification and buffers for message.
+
+               +-------------------------------------+
+               | Xilinx ZynqMP IPI Controller        |
+               +-------------------------------------+
+    +--------------------------------------------------+
+  TF-A                   |                     |
+                         |                     |
+                         |                     |
+    +--------------------------+               |
+                         |                     |
+                         |                     |
+    +--------------------------------------------------+
+              +------------------------------------------+
+              |  +----------------+   +----------------+ |
+  Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
+              |  |  Registers     |   |                | |
+              |  |                |   |                | |
+              |  +----------------+   +----------------+ |
+              |                                          |
+              | Xilinx IPI Agent Block                   |
+              +------------------------------------------+
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ipi-mailbox
+
+  method:
+    description: |
+      The method of calling the PM-API firmware layer.
+      Permitted values are.
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - smc
+      - hvc
+    default: smc
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  xlnx,ipi-id:
+    description: |
+      Remote Xilinx IPI agent ID of which the mailbox is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  '^mailbox@[0-9a-f]+$':
+    description: Internal ipi mailbox node
+    type: object  # DT nodes are json objects
+    additionalProperties: false
+    properties:
+      xlnx,ipi-id:
+        description:
+          Remote Xilinx IPI agent ID of which the mailbox is connected to.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      '#mbox-cells':
+        const: 1
+        description:
+          It contains tx(0) or rx(1) channel IPI id number.
+
+      reg:
+        maxItems: 4
+
+      reg-names:
+        items:
+          - const: local_request_region
+          - const: local_response_region
+          - const: remote_request_region
+          - const: remote_response_region
+
+    required:
+      - reg
+      - reg-names
+      - "#mbox-cells"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+  - xlnx,ipi-id
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    amba {
+      #address-cells = <0x2>;
+      #size-cells = <0x2>;
+      zynqmp-mailbox {
+        compatible = "xlnx,zynqmp-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,ipi-id = <0>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        mailbox: mailbox@ff9905c0 {
+          reg = <0x0 0xff9905c0 0x0 0x20>,
+                <0x0 0xff9905e0 0x0 0x20>,
+                <0x0 0xff990e80 0x0 0x20>,
+                <0x0 0xff990ea0 0x0 0x20>;
+          reg-names = "local_request_region",
+                      "local_response_region",
+                      "remote_request_region",
+                      "remote_response_region";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allegro,al5e.yaml b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
new file mode 100644
index 0000000000..2899d26d69
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allegro,al5e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allegro DVT Video IP Codecs
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+description: |-
+  Allegro DVT video IP codecs present in the Xilinx ZynqMP SoC. The IP core may
+  either be a H.264/H.265 encoder or H.264/H.265 decoder ip core.
+
+  Each actual codec engine is controlled by a microcontroller (MCU). Host
+  software uses a provided mailbox interface to communicate with the MCU. The
+  MCUs share an interrupt.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: allegro,al5e-1.1
+          - const: allegro,al5e
+      - items:
+          - const: allegro,al5d-1.1
+          - const: allegro,al5d
+
+  reg:
+    items:
+      - description: The registers
+      - description: The SRAM
+
+  reg-names:
+    items:
+      - const: regs
+      - const: sram
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: MCU clock
+      - description: Core AXI master port clock
+      - description: MCU AXI master port clock
+      - description: AXI4-Lite slave port clock
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: mcu_clk
+      - const: m_axi_core_aclk
+      - const: m_axi_mcu_aclk
+      - const: s_axi_lite_aclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: False
+
+examples:
+  - |
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        al5e: video-codec@a0009000 {
+            compatible = "allegro,al5e-1.1", "allegro,al5e";
+            reg = <0 0xa0009000 0 0x1000>,
+            <0 0xa0000000 0 0x8000>;
+            reg-names = "regs", "sram";
+            interrupts = <0 96 4>;
+            clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
+            <&clkc 71>, <&clkc 71>, <&clkc 71>;
+            clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+            "m_axi_mcu_aclk", "s_axi_lite_aclk";
+        };
+    };
+  - |
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        al5d: video-codec@a0029000 {
+            compatible = "allegro,al5d-1.1", "allegro,al5d";
+            reg = <0 0xa0029000 0 0x1000>,
+                  <0 0xa0020000 0 0x8000>;
+            reg-names = "regs", "sram";
+            interrupts = <0 96 4>;
+            clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
+                     <&clkc 71>, <&clkc 71>, <&clkc 71>;
+            clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+            "m_axi_mcu_aclk", "s_axi_lite_aclk";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
new file mode 100644
index 0000000000..617264ce47
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CMOS Sensor Interface (CSI)
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |-
+  The Allwinner A10 and later has a CMOS Sensor Interface to retrieve
+  frames from a parallel or BT656 sensor.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-csi1
+      - const: allwinner,sun7i-a20-csi0
+      - items:
+          - const: allwinner,sun7i-a20-csi1
+          - const: allwinner,sun4i-a10-csi1
+      - items:
+          - const: allwinner,sun8i-r40-csi0
+          - const: allwinner,sun7i-a20-csi0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: The CSI interface clock
+          - description: The CSI DRAM clock
+
+      - items:
+          - description: The CSI interface clock
+          - description: The CSI ISP clock
+          - description: The CSI DRAM clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: bus
+          - const: ram
+
+      - items:
+          - const: bus
+          - const: isp
+          - const: ram
+
+  resets:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-width:
+            enum: [8, 16]
+
+          data-active: true
+          hsync-active: true
+          pclk-sample: true
+          vsync-active: true
+
+        required:
+          - bus-width
+          - data-active
+          - hsync-active
+          - pclk-sample
+          - vsync-active
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun7i-a20-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    csi0: csi@1c09000 {
+        compatible = "allwinner,sun7i-a20-csi0";
+        reg = <0x01c09000 0x1000>;
+        interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+        clock-names = "bus", "isp", "ram";
+        resets = <&ccu RST_CSI0>;
+
+        port {
+            csi_from_ov5640: endpoint {
+                remote-endpoint = <&ov5640_to_csi>;
+                bus-width = <8>;
+                hsync-active = <1>; /* Active high */
+                vsync-active = <0>; /* Active low */
+                data-active = <1>;  /* Active high */
+                pclk-sample = <1>;  /* Rising */
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
new file mode 100644
index 0000000000..42dfe22ad5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Infrared Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-ir
+      - const: allwinner,sun5i-a13-ir
+      - const: allwinner,sun6i-a31-ir
+      - items:
+          - enum:
+              - allwinner,suniv-f1c100s-ir
+              - allwinner,sun8i-a83t-ir
+              - allwinner,sun8i-r40-ir
+              - allwinner,sun50i-a64-ir
+              - allwinner,sun50i-h6-ir
+              - allwinner,sun50i-h616-ir
+          - const: allwinner,sun6i-a31-ir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: ir
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    default: 8000000
+    description:
+      IR Receiver clock frequency, in Hertz.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      ir0: ir@1c21800 {
+          compatible = "allwinner,sun4i-a10-ir";
+          clocks = <&apb0_gates 6>, <&ir0_clk>;
+          clock-names = "apb", "ir";
+          clock-frequency = <3000000>;
+          resets = <&apb0_rst 1>;
+          interrupts = <0 5 1>;
+          reg = <0x01C21800 0x40>;
+          linux,rc-map-name = "rc-rc6-mce";
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
new file mode 100644
index 0000000000..541325f900
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video Engine
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-video-engine
+      - allwinner,sun5i-a13-video-engine
+      - allwinner,sun7i-a20-video-engine
+      - allwinner,sun8i-a33-video-engine
+      - allwinner,sun8i-h3-video-engine
+      - allwinner,sun8i-v3s-video-engine
+      - allwinner,sun8i-r40-video-engine
+      - allwinner,sun20i-d1-video-engine
+      - allwinner,sun50i-a64-video-engine
+      - allwinner,sun50i-h5-video-engine
+      - allwinner,sun50i-h6-video-engine
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: RAM Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  allwinner,sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
+    description: Phandle to the device SRAM
+
+  iommus:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description:
+      CMA pool to use for buffers allocation instead of the default
+      CMA pool.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - allwinner,sram
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun7i-a20-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    video-codec@1c0e000 {
+        compatible = "allwinner,sun7i-a20-video-engine";
+        reg = <0x01c0e000 0x1000>;
+        interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+                 <&ccu CLK_DRAM_VE>;
+        clock-names = "ahb", "mod", "ram";
+        resets = <&ccu RST_VE>;
+        allwinner,sram = <&ve_sram 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
new file mode 100644
index 0000000000..a4f06bbdfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G2 VPU codec implemented on Allwinner H6 SoC
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+
+description:
+  Hantro G2 video decode accelerator present on Allwinner H6 SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-vpu-g2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    video-codec-g2@1c00000 {
+        compatible = "allwinner,sun50i-h6-vpu-g2";
+        reg = <0x01c00000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_VP9>;
+        iommus = <&iommu 5>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
new file mode 100644
index 0000000000..b3d6db9226
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 CMOS Sensor Interface (CSI)
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-csi
+      - allwinner,sun8i-a83t-csi
+      - allwinner,sun8i-h3-csi
+      - allwinner,sun8i-v3s-csi
+      - allwinner,sun50i-a64-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: DRAM Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: Parallel input port, connect to a parallel sensor
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-width:
+            enum: [ 8, 10, 12, 16 ]
+
+          pclk-sample: true
+          hsync-active: true
+          vsync-active: true
+
+        required:
+          - bus-width
+
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: "#/properties/port"
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 bridge input port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Internal output port to the ISP
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    csi1: csi@1cb4000 {
+        compatible = "allwinner,sun8i-v3s-csi";
+        reg = <0x01cb4000 0x1000>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>,
+                 <&ccu CLK_DRAM_CSI>;
+        clock-names = "bus",
+                      "mod",
+                      "ram";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                /* Parallel bus endpoint */
+                csi1_ep: endpoint {
+                    remote-endpoint = <&adv7611_ep>;
+                    bus-width = <16>;
+
+                    /*
+                     * If hsync-active/vsync-active are missing,
+                     * embedded BT.656 sync is used.
+                     */
+                    hsync-active = <0>; /* Active low */
+                    vsync-active = <0>; /* Active low */
+                    pclk-sample = <1>;  /* Rising */
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
new file mode 100644
index 0000000000..a61a76bb61
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Image Signal Processor Driver (ISP)
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-isp
+      - allwinner,sun8i-v3s-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: DRAM Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI0 input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI1 input port
+
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-v3s-isp
+    then:
+      required:
+        - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    isp: isp@1cb8000 {
+        compatible = "allwinner,sun8i-v3s-isp";
+        reg = <0x01cb8000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+             <&ccu CLK_CSI1_SCLK>,
+             <&ccu CLK_DRAM_CSI>;
+        clock-names = "bus", "mod", "ram";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                isp_in_csi0: endpoint {
+                    remote-endpoint = <&csi0_out_isp>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
new file mode 100644
index 0000000000..54e15ab8a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-csi2
+      - items:
+          - const: allwinner,sun8i-v3s-mipi-csi2
+          - const: allwinner,sun6i-a31-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-v3s-mipi-csi2",
+                     "allwinner,sun6i-a31-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_CSI>;
+
+        phys = <&dphy>;
+        phy-names = "dphy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov5648: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov5648_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi0: endpoint {
+                    remote-endpoint = <&csi0_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
new file mode 100644
index 0000000000..c2f292dd01
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T DE2 Rotate
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@siol.net>
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |-
+  The Allwinner A83T and A64 have a rotation core used for
+  rotating and flipping images.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-rotate
+      - items:
+          - const: allwinner,sun50i-a64-de2-rotate
+          - const: allwinner,sun8i-a83t-de2-rotate
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Rotate interface clock
+      - description: Rotate module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-de2.h>
+    #include <dt-bindings/reset/sun8i-de2.h>
+
+    rotate: rotate@1020000 {
+        compatible = "allwinner,sun8i-a83t-de2-rotate";
+        reg = <0x1020000 0x10000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&display_clocks CLK_BUS_ROT>,
+                 <&display_clocks CLK_ROT>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&display_clocks RST_ROT>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
new file mode 100644
index 0000000000..3cac68a87a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a83t-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: MIPI-specific Clock
+      - description: Misc CSI Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: mipi
+      - const: misc
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-a83t-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI_SCLK>,
+                 <&ccu CLK_MIPI_CSI>,
+                 <&ccu CLK_CSI_MISC>;
+        clock-names = "bus", "mod", "mipi", "misc";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov8865: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov8865_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi: endpoint {
+                    remote-endpoint = <&csi_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
new file mode 100644
index 0000000000..3ccd52164f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-h3-deinterlace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H3 Deinterlace
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@siol.net>
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |-
+  The Allwinner H3 and later has a deinterlace core used for
+  deinterlacing interlaced video content.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-h3-deinterlace
+      - items:
+          - const: allwinner,sun8i-r40-deinterlace
+          - const: allwinner,sun8i-h3-deinterlace
+      - items:
+          - const: allwinner,sun50i-a64-deinterlace
+          - const: allwinner,sun8i-h3-deinterlace
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Deinterlace interface clock
+      - description: Deinterlace module clock
+      - description: Deinterlace DRAM clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dma-mem
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    deinterlace: deinterlace@1400000 {
+        compatible = "allwinner,sun8i-h3-deinterlace";
+        reg = <0x01400000 0x20000>;
+        clocks = <&ccu CLK_BUS_DEINTERLACE>,
+                 <&ccu CLK_DEINTERLACE>,
+                 <&ccu CLK_DRAM_DEINTERLACE>;
+        clock-names = "bus", "mod", "ram";
+        resets = <&ccu RST_BUS_DEINTERLACE>;
+        interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+        interconnects = <&mbus 9>;
+        interconnect-names = "dma-mem";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
new file mode 100644
index 0000000000..f23fa6d06a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GE2D Acceleration Unit
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-ge2d
+
+  interrupts:
+    minItems: 1
+
+  reg:
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    ge2d: ge2d@ff940000 {
+          compatible = "amlogic,axg-ge2d";
+          reg = <0xff940000 0x10000>;
+          interrupts = <150>;
+          clocks = <&clk_ge2d>;
+          resets = <&reset_ge2d>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
new file mode 100644
index 0000000000..55930f6107
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Video Decoder
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Maxime Jourdan <mjourdan@baylibre.com>
+
+description: |
+  The video decoding IP lies within the DOS memory region,
+  except for the hardware bitstream parser that makes use of an undocumented
+  region.
+
+  It makes use of the following blocks:
+  - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
+    then feed from this VIFIFO.
+  - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
+  - VDEC_HEVC can decode HEVC and VP9.
+
+  Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
+  concurrently.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,gxbb-vdec # GXBB (S905)
+              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxm-vdec # GXM (S912)
+          - const: amlogic,gx-vdec
+      - enum:
+          - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+          - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: vdec
+      - const: esparser
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: dos
+      - const: esparser
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: esparser
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: dos_parser
+      - const: dos
+      - const: vdec_1
+      - const: vdec_hevc
+      - const: vdec_hevcf
+
+  amlogic,ao-sysctrl:
+    description: should point to the AOBUS sysctrl node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,gx-vdec
+
+    then:
+      properties:
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-vdec
+              - amlogic,sm1-vdec
+
+    then:
+      properties:
+        clock-names:
+          minItems: 5
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - amlogic,ao-sysctrl
+  - amlogic,canvas
+
+additionalProperties: false
+
+examples:
+  - |
+    vdec: video-decoder@c8820000 {
+          compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+          reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>;
+          reg-names = "dos", "esparser";
+          interrupts = <44>, <32>;
+          interrupt-names = "vdec", "esparser";
+          clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>;
+          clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+          resets = <&reset_parser>;
+          reset-names = "esparser";
+          amlogic,ao-sysctrl = <&sysctrl_AO>;
+          amlogic,canvas = <&canvas>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
new file mode 100644
index 0000000000..377acce934
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson IR transmitter
+
+maintainers:
+  - Viktor Prutyanov <viktor.prutyanov@phystech.edu>
+
+description: |
+  Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
+  (also called blaster) controller onboard. It is capable of
+  sending IR signals with arbitrary carrier frequency and duty cycle.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-ir-tx
+      - items:
+          - const: amlogic,meson-g12a-ir-tx
+          - const: amlogic,meson-ir-tx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: xtal
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/g12a-clkc.h>
+
+    ir@ff80014c {
+      compatible = "amlogic,meson-g12a-ir-tx", "amlogic,meson-ir-tx";
+      reg = <0xff80014c 0x10>;
+      interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_CLK81>, <&xtal>;
+      clock-names = "sysclk", "xtal";
+    };
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
new file mode 100644
index 0000000000..3f9fa92703
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson IR remote control receiver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson6-ir
+          - amlogic,meson8b-ir
+          - amlogic,meson-gxbb-ir
+      - items:
+          - const: amlogic,meson-gx-ir
+          - const: amlogic,meson-gxbb-ir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ir-receiver@c8100480 {
+        compatible = "amlogic,meson6-ir";
+        reg = <0xc8100480 0x20>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
new file mode 100644
index 0000000000..c0d83d7552
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amphion,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amphion VPU codec IP
+
+maintainers:
+  - Ming Qian <ming.qian@nxp.com>
+  - Shijie Qin <shijie.qin@nxp.com>
+
+description: |-
+  The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present
+  on NXP i.MX8Q SoCs.
+
+properties:
+  $nodename:
+    pattern: "^vpu@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nxp,imx8qm-vpu
+          - nxp,imx8qxp-vpu
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^mailbox@[0-9a-f]+$":
+    description:
+      Each vpu encoder or decoder correspond a MU, which used for communication
+      between driver and firmware. Implement via mailbox on driver.
+    $ref: ../mailbox/fsl,mu.yaml#
+
+
+  "^vpu-core@[0-9a-f]+$":
+    description:
+      Each core correspond a decoder or encoder, need to configure them
+      separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
+      has one decoder and one encoder.
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nxp,imx8q-vpu-decoder
+              - nxp,imx8q-vpu-encoder
+
+      reg:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      mbox-names:
+        items:
+          - const: tx0
+          - const: tx1
+          - const: rx
+
+      mboxes:
+        description:
+          List of phandle of 2 MU channels for tx, 1 MU channel for rx.
+        maxItems: 3
+
+      memory-region:
+        description:
+          Phandle to the reserved memory nodes to be associated with the
+          remoteproc device. The reserved memory nodes should be carveout nodes,
+          and should be defined as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        items:
+          - description: region reserved for firmware image sections.
+          - description: region used for RPC shared memory between firmware and
+                         driver.
+
+    required:
+      - compatible
+      - reg
+      - power-domains
+      - mbox-names
+      - mboxes
+      - memory-region
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example for i.MX8QM platform:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    vpu: vpu@2c000000 {
+      compatible = "nxp,imx8qm-vpu";
+      ranges = <0x2c000000 0x2c000000 0x2000000>;
+      reg = <0x2c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      power-domains = <&pd IMX_SC_R_VPU>;
+
+      mu_m0: mailbox@2d000000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d000000 0x20000>;
+        interrupts = <0 472 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+      };
+
+      mu1_m0: mailbox@2d020000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d020000 0x20000>;
+        interrupts = <0 473 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+      };
+
+      mu2_m0: mailbox@2d040000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d040000 0x20000>;
+        interrupts = <0 474 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+      };
+
+      vpu_core0: vpu-core@2d080000 {
+        compatible = "nxp,imx8q-vpu-decoder";
+        reg = <0x2d080000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu_m0 0 0>,
+                 <&mu_m0 0 1>,
+                 <&mu_m0 1 0>;
+        memory-region = <&decoder_boot>, <&decoder_rpc>;
+      };
+
+      vpu_core1: vpu-core@2d090000 {
+        compatible = "nxp,imx8q-vpu-encoder";
+        reg = <0x2d090000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu1_m0 0 0>,
+                 <&mu1_m0 0 1>,
+                 <&mu1_m0 1 0>;
+        memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+      };
+
+      vpu_core2: vpu-core@2d0a0000 {
+        reg = <0x2d0a0000 0x10000>;
+        compatible = "nxp,imx8q-vpu-encoder";
+        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu2_m0 0 0>,
+                 <&mu2_m0 0 1>,
+                 <&mu2_m0 1 0>;
+        memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt
new file mode 100644
index 0000000000..d2ca325122
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/aspeed-video.txt
@@ -0,0 +1,33 @@
+* Device tree bindings for Aspeed Video Engine
+
+The Video Engine (VE) embedded in the Aspeed AST2400/2500/2600 SOCs can
+capture and compress video data from digital or analog sources.
+
+Required properties:
+ - compatible:		"aspeed,ast2400-video-engine" or
+			"aspeed,ast2500-video-engine" or
+			"aspeed,ast2600-video-engine"
+ - reg:			contains the offset and length of the VE memory region
+ - clocks:		clock specifiers for the syscon clocks associated with
+			the VE (ordering must match the clock-names property)
+ - clock-names:		"vclk" and "eclk"
+ - resets:		reset specifier for the syscon reset associated with
+			the VE
+ - interrupts:		the interrupt associated with the VE on this platform
+
+Optional properties:
+ - memory-region:
+	phandle to a memory region to allocate from, as defined in
+	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+Example:
+
+video-engine@1e700000 {
+    compatible = "aspeed,ast2500-video-engine";
+    reg = <0x1e700000 0x20000>;
+    clocks = <&syscon ASPEED_CLK_GATE_VCLK>, <&syscon ASPEED_CLK_GATE_ECLK>;
+    clock-names = "vclk", "eclk";
+    resets = <&syscon ASPEED_RESET_VIDEO>;
+    interrupts = <7>;
+    memory-region = <&video_engine_memory>;
+};
diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml
new file mode 100644
index 0000000000..dc8aba698d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2016-2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/atmel,isc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Image Sensor Controller (ISC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description: |
+  The Image Sensor Controller (ISC) device provides the video input capabilities for the
+  Atmel/Microchip AT91 SAMA family of devices.
+
+  The ISC has a single parallel input that supports RAW Bayer, RGB or YUV video,
+  with both external synchronization and BT.656 synchronization for the latter.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-isc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: hclock
+      - const: iscck
+      - const: gck
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: isc-mck
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Input port node, single endpoint describing the input pad.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+
+        properties:
+          remote-endpoint: true
+
+          bus-width:
+            enum: [8, 9, 10, 11, 12]
+            default: 12
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        required:
+          - remote-endpoint
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - clock-output-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    isc: isc@f0008000 {
+        compatible = "atmel,sama5d2-isc";
+        reg = <0xf0008000 0x4000>;
+        interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+        clock-names = "hclock", "iscck", "gck";
+        #clock-cells = <0>;
+        clock-output-names = "isc-mck";
+
+        port {
+                isc_0: endpoint {
+                       remote-endpoint = <&ov7740_0>;
+                       hsync-active = <1>;
+                       vsync-active = <0>;
+                       pclk-sample = <1>;
+                       bus-width = <8>;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
new file mode 100644
index 0000000000..8924c7545b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
@@ -0,0 +1,66 @@
+Atmel Image Sensor Interface (ISI)
+----------------------------------
+
+Required properties for ISI:
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
+- reg: physical base address and length of the registers set for the device.
+- interrupts: should contain IRQ line for the ISI.
+- clocks: list of clock specifiers, corresponding to entries in the clock-names
+	property; please refer to clock-bindings.txt.
+- clock-names: required elements: "isi_clk".
+- pinctrl-names, pinctrl-0: please refer to pinctrl-bindings.txt.
+
+ISI supports a single port node with parallel bus. It shall contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Endpoint node properties
+------------------------
+
+- bus-width: <8> or <10> (mandatory)
+- hsync-active (default: active high)
+- vsync-active (default: active high)
+- pclk-sample (default: sample on falling edge)
+- remote-endpoint: A phandle to the bus receiver's endpoint node (mandatory).
+
+Example:
+
+isi: isi@f0034000 {
+	compatible = "atmel,at91sam9g45-isi";
+	reg = <0xf0034000 0x4000>;
+	interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_isi_data_0_7>;
+	clocks = <&isi_clk>;
+	clock-names = "isi_clk";
+	port {
+		isi_0: endpoint {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
+		};
+	};
+};
+
+i2c1: i2c@f0018000 {
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pck0>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pck0>;
+		assigned-clock-rates = <25000000>;
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
new file mode 100644
index 0000000000..30a335b107
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MIPI-CSI2 RX controller
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+description:
+  The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
+  lanes in input, and 4 different pixel streams in output.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7110-csi2rx
+      - const: cdns,csi2rx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: CSI2Rx system clock
+      - description: Gated Register bank clock for APB interface
+      - description: pixel Clock for Stream interface 0
+      - description: pixel Clock for Stream interface 1
+      - description: pixel Clock for Stream interface 2
+      - description: pixel Clock for Stream interface 3
+
+  clock-names:
+    items:
+      - const: sys_clk
+      - const: p_clk
+      - const: pixel_if0_clk
+      - const: pixel_if1_clk
+      - const: pixel_if2_clk
+      - const: pixel_if3_clk
+
+  resets:
+    items:
+      - description: CSI2Rx system reset
+      - description: Gated Register bank reset for APB interface
+      - description: pixel reset for Stream interface 0
+      - description: pixel reset for Stream interface 1
+      - description: pixel reset for Stream interface 2
+      - description: pixel reset for Stream interface 3
+
+  reset-names:
+    items:
+      - const: sys
+      - const: reg_bank
+      - const: pixel_if0
+      - const: pixel_if1
+      - const: pixel_if2
+      - const: pixel_if3
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                const: 4
+
+              clock-lanes:
+                const: 0
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 0 Output port node
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 1 Output port node
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 2 Output port node
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 3 Output port node
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    csi@d060000 {
+        compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
+        reg = <0x0d060000 0x1000>;
+        clocks = <&byteclock 7>, <&byteclock 6>,
+                 <&coreclock 8>, <&coreclock 9>,
+                 <&coreclock 10>, <&coreclock 11>;
+        clock-names = "sys_clk", "p_clk",
+                      "pixel_if0_clk", "pixel_if1_clk",
+                      "pixel_if2_clk", "pixel_if3_clk";
+        resets = <&bytereset 9>, <&bytereset 4>,
+                 <&corereset 5>, <&corereset 6>,
+                 <&corereset 7>, <&corereset 8>;
+        reset-names = "sys", "reg_bank",
+                      "pixel_if0", "pixel_if1",
+                      "pixel_if2", "pixel_if3";
+        phys = <&csi_phy>;
+        phy-names = "dphy";
+
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    csi2rx_in_sensor: endpoint {
+                        remote-endpoint = <&sensor_out_csi2rx>;
+                        clock-lanes = <0>;
+                        data-lanes = <1 2>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    csi2rx_out_grabber0: endpoint {
+                        remote-endpoint = <&grabber0_in_csi2rx>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    csi2rx_out_grabber1: endpoint {
+                        remote-endpoint = <&grabber1_in_csi2rx>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+
+                    csi2rx_out_grabber2: endpoint {
+                        remote-endpoint = <&grabber2_in_csi2rx>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+
+                    csi2rx_out_grabber3: endpoint {
+                        remote-endpoint = <&grabber3_in_csi2rx>;
+                    };
+                };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2tx.txt b/Documentation/devicetree/bindings/media/cdns,csi2tx.txt
new file mode 100644
index 0000000000..751b9edf12
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cdns,csi2tx.txt
@@ -0,0 +1,99 @@
+Cadence MIPI-CSI2 TX controller
+===============================
+
+The Cadence MIPI-CSI2 TX controller is a CSI-2 bridge supporting up to
+4 CSI lanes in output, and up to 4 different pixel streams in input.
+
+Required properties:
+  - compatible: must be set to "cdns,csi2tx" or "cdns,csi2tx-1.3"
+    for version 1.3 of the controller, "cdns,csi2tx-2.1" for v2.1
+  - reg: base address and size of the memory mapped region
+  - clocks: phandles to the clocks driving the controller
+  - clock-names: must contain:
+    * esc_clk: escape mode clock
+    * p_clk: register bank clock
+    * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
+                         implemented in hardware, between 0 and 3
+
+Optional properties
+  - phys: phandle to the D-PHY. If it is set, phy-names need to be set
+  - phy-names: must contain "dphy"
+
+Required subnodes:
+  - ports: A ports node with one port child node per device input and output
+           port, in accordance with the video interface bindings defined in
+           Documentation/devicetree/bindings/media/video-interfaces.txt. The
+           port nodes are numbered as follows.
+
+           Port Description
+           -----------------------------
+           0    CSI-2 output
+           1    Stream 0 input
+           2    Stream 1 input
+           3    Stream 2 input
+           4    Stream 3 input
+
+           The stream input port nodes are optional if they are not
+           connected to anything at the hardware level or implemented
+           in the design. Since there is only one endpoint per port,
+           the endpoints are not numbered.
+
+Example:
+
+csi2tx: csi-bridge@0d0e1000 {
+	compatible = "cdns,csi2tx";
+	reg = <0x0d0e1000 0x1000>;
+	clocks = <&byteclock>, <&byteclock>,
+		 <&coreclock>, <&coreclock>,
+		 <&coreclock>, <&coreclock>;
+	clock-names = "p_clk", "esc_clk",
+		      "pixel_if0_clk", "pixel_if1_clk",
+		      "pixel_if2_clk", "pixel_if3_clk";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi2tx_out: endpoint {
+				remote-endpoint = <&remote_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi2tx_in_stream0: endpoint {
+				remote-endpoint = <&stream0_out>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			csi2tx_in_stream1: endpoint {
+				remote-endpoint = <&stream1_out>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			csi2tx_in_stream2: endpoint {
+				remote-endpoint = <&stream2_out>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			csi2tx_in_stream3: endpoint {
+				remote-endpoint = <&stream3_out>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
new file mode 100644
index 0000000000..b1fab53418
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AO-CEC Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
+  to handle communication between HDMI connected devices over the CEC bus.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gx-ao-cec # GXBB, GXL, GXM, G12A and SM1 AO_CEC_A module
+      - amlogic,meson-g12a-ao-cec # G12A AO_CEC_B module
+      - amlogic,meson-sm1-ao-cec # SM1 AO_CEC_B module
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-gx-ao-cec
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AO-CEC clock
+
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-g12a-ao-cec
+              - amlogic,meson-sm1-ao-cec
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AO-CEC clock generator source
+
+        clock-names:
+          items:
+            - const: oscin
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - hdmi-phandle
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    cec_AO: cec@100 {
+        compatible = "amlogic,meson-gx-ao-cec";
+        reg = <0x00100 0x14>;
+        interrupts = <199>;
+        clocks = <&clkc_cec>;
+        clock-names = "core";
+        hdmi-phandle = <&hdmi_tx>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
new file mode 100644
index 0000000000..af6ee5f1c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC Adapters Common Properties
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+
+properties:
+  $nodename:
+    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
+
+  hdmi-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI controller.
+
+  needs-hpd:
+    type: boolean
+    description:
+      The CEC support is only available when the HPD is high. Some boards only
+      let the CEC pin through if the HPD is high, for example if there is a
+      level converter that uses the HPD to power up or down.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
new file mode 100644
index 0000000000..64d7ec0576
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC GPIO
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description: |
+  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
+  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
+  to another GPIO line.
+
+  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
+  5V lines it is 5.3V. So you may need some sort of level conversion
+  circuitry when connecting them to a GPIO line.
+
+properties:
+  compatible:
+    const: cec-gpio
+
+  cec-gpios:
+    maxItems: 1
+    description:
+      GPIO that the CEC line is connected to. The line should be tagged as open
+      drain.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      GPIO that the HPD line is connected to.  Used for debugging HPD changes
+      when the CEC line is not associated with an HDMI receiver/transmitter.
+
+  v5-gpios:
+    maxItems: 1
+    description:
+      GPIO that the 5V line is connected to.  Used for debugging changes on the
+      5V line.
+
+required:
+  - compatible
+  - cec-gpios
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      required:
+        - hdmi-phandle
+    then:
+      properties:
+        hpd-gpios: false
+
+  - if:
+      required:
+        - hpd-gpios
+    then:
+      properties:
+        hdmi-phandle: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    cec {
+        compatible = "cec-gpio";
+        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
new file mode 100644
index 0000000000..a6b73498bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/nvidia,tegra114-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI CEC
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra114-cec
+      - nvidia,tegra124-cec
+      - nvidia,tegra210-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@70015000 {
+        compatible = "nvidia,tegra124-cec";
+        reg = <0x70015000 0x00001000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_CEC>;
+        clock-names = "cec";
+        hdmi-phandle = <&hdmi>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
new file mode 100644
index 0000000000..016c8a77c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos HDMI CEC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5p-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hdmicec
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - samsung,syscon-phandle
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@101b0000 {
+        compatible = "samsung,s5p-cec";
+        reg = <0x101B0000 0x200>;
+
+        clocks = <&clock CLK_HDMI_CEC>;
+        clock-names = "hdmicec";
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        hdmi-phandle = <&hdmi>;
+        needs-hpd;
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_cec>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
new file mode 100644
index 0000000000..aeddf16ed3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STIH4xx HDMI CEC
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: st,stih-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec-clk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: cec-irq
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - hdmi-phandle
+  - interrupts
+  - resets
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    cec@94a087c {
+        compatible = "st,stih-cec";
+        reg = <0x94a087c 0x64>;
+
+        clocks = <&clk_sysin>;
+        clock-names = "cec-clk";
+        hdmi-phandle = <&sti_hdmi>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cec-irq";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cec0_default>;
+        resets = <&softreset STIH407_LPM_SOFTRESET>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
new file mode 100644
index 0000000000..2314a9a146
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CEC
+
+maintainers:
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-cec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  clock-names:
+    items:
+      - const: cec
+      - const: hdmi-cec
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    cec: cec@40006c00 {
+        compatible = "st,stm32-cec";
+        reg = <0x40006c00 0x400>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc CEC_K>, <&clk_lse>;
+        clock-names = "cec", "hdmi-cec";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
new file mode 100644
index 0000000000..c9d5adbc8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/coda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Coda multi-standard codec IP
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |-
+  Coda codec IPs are present in i.MX SoCs in various versions,
+  called VPU (Video Processing Unit).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,imx27-vpu
+          - const: cnm,codadx6
+      - items:
+          - const: fsl,imx51-vpu
+          - const: cnm,codahx4
+      - items:
+          - const: fsl,imx53-vpu
+          - const: cnm,coda7541
+      - items:
+          - enum:
+              - fsl,imx6dl-vpu
+              - fsl,imx6q-vpu
+          - const: cnm,coda960
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PER clock
+      - description: AHB interface clock
+
+  clock-names:
+    items:
+      - const: per
+      - const: ahb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: BIT processor interrupt
+      - description: JPEG unit interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: bit
+      - const: jpeg
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle pointing to the SRAM device node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cnm,coda960
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        power-domains: false
+
+examples:
+  - |
+    vpu: video-codec@63ff4000 {
+        compatible = "fsl,imx53-vpu", "cnm,coda7541";
+        reg = <0x63ff4000 0x1000>;
+        interrupts = <9>;
+        clocks = <&clks 63>, <&clks 63>;
+        clock-names = "per", "ahb";
+        iram = <&ocram>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
new file mode 100644
index 0000000000..84a5e894ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6ull-pxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Pixel Pipeline
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+description:
+  The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
+  that supports scaling, colorspace conversion, alpha blending, rotation, and
+  pixel conversion via lookup table. Different versions are present on various
+  i.MX SoCs from i.MX23 to i.MX7.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx6ul-pxp
+          - fsl,imx6ull-pxp
+          - fsl,imx7d-pxp
+      - items:
+          - enum:
+              - fsl,imx6sll-pxp
+              - fsl,imx6sx-pxp
+          - const: fsl,imx6ull-pxp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: axi
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-pxp
+              - fsl,imx6ul-pxp
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pxp: pxp@21cc000 {
+        compatible = "fsl,imx6ull-pxp";
+        reg = <0x021cc000 0x4000>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "axi";
+        clocks = <&clks IMX6UL_CLK_PXP>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl-vdoa.txt b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
new file mode 100644
index 0000000000..6c5628530b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
@@ -0,0 +1,21 @@
+Freescale Video Data Order Adapter
+==================================
+
+The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
+is to reorder video data from the macroblock tiled order produced by the CODA
+960 VPU to the conventional raster-scan order for scanout.
+
+Required properties:
+- compatible: must be "fsl,imx6q-vdoa"
+- reg: the register base and size for the device registers
+- interrupts: the VDOA interrupt
+- clocks: the vdoa clock
+
+Example:
+
+vdoa@21e4000 {
+        compatible = "fsl,imx6q-vdoa";
+        reg = <0x021e4000 0x4000>;
+        interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_VDOA>;
+};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
new file mode 100644
index 0000000000..008c007ed7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO Based IR receiver
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    const: gpio-ir-receiver
+
+  gpios:
+    maxItems: 1
+
+  linux,autosuspend-period:
+    description: autosuspend delay time in milliseconds
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  wakeup-source:
+    description: IR receiver can wake-up the system.
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ir-receiver {
+        compatible = "gpio-ir-receiver";
+        gpios = <&gpio0 19 1>;
+        linux,rc-map-name = "rc-rc6-mce";
+        linux,autosuspend-period = <125>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
new file mode 100644
index 0000000000..ca4cf77466
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
@@ -0,0 +1,26 @@
+Device-Tree bindings for hix5hd2 ir IP
+
+Required properties:
+	- compatible: Should contain "hisilicon,hix5hd2-ir", or:
+		- "hisilicon,hi3796cv300-ir" for Hi3796CV300 IR device.
+	- reg: Base physical address of the controller and length of memory
+	  mapped region.
+	- interrupts: interrupt-specifier for the sole interrupt generated by
+	  the device. The interrupt specifier format depends on the interrupt
+	  controller parent.
+	- clocks: clock phandle and specifier pair.
+
+Optional properties:
+	- linux,rc-map-name: see rc.txt file in the same directory.
+	- hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files.
+		Provide correct clocks instead.
+
+Example node:
+
+	ir: ir@f8001000 {
+		compatible = "hisilicon,hix5hd2-ir";
+		reg = <0xf8001000 0x1000>;
+		interrupts = <0 47 4>;
+		clocks = <&clock HIX5HD2_IR_CLOCK>;
+		linux,rc-map-name = "rc-tivo";
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ad5820.txt b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
new file mode 100644
index 0000000000..5764cbedf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
@@ -0,0 +1,28 @@
+* Analog Devices AD5820 autofocus coil
+
+Required Properties:
+
+  - compatible: Must contain one of:
+		- "adi,ad5820"
+		- "adi,ad5821"
+		- "adi,ad5823"
+
+  - reg: I2C slave address
+
+  - VANA-supply: supply of voltage for VANA pin
+
+Optional properties:
+
+   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is
+active low, a high level on the pin enables the device.
+
+Example:
+
+       ad5820: coil@c {
+               compatible = "adi,ad5820";
+               reg = <0x0c>;
+
+               VANA-supply = <&vaux4>;
+               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+       };
+
diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
new file mode 100644
index 0000000000..4cce0de40e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
@@ -0,0 +1,38 @@
+* Analog Devices ADP1653 flash LED driver
+
+Required Properties:
+
+  - compatible: Must contain "adi,adp1653"
+
+  - reg: I2C slave address
+
+  - enable-gpios: Specifier of the GPIO connected to EN pin
+
+There are two LED outputs available - flash and indicator. One LED is
+represented by one child node, nodes need to be named "flash" and "indicator".
+
+Required properties of the LED child node:
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+
+Required properties of the flash LED child node:
+
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	adp1653: led-controller@30 {
+		compatible = "adi,adp1653";
+		reg = <0x30>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+		flash {
+			flash-timeout-us = <500000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <50000>;
+		};
+		indicator {
+			led-max-microamp = <17500>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
new file mode 100644
index 0000000000..c8d887eee3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7180 analog video decoder family
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description:
+  The adv7180 family devices are used to capture analog video to different
+  digital interfaces like MIPI CSI-2 or parallel video.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7180
+          - adi,adv7180cp
+          - adi,adv7180st
+          - adi,adv7182
+          - adi,adv7280
+          - adi,adv7280-m
+          - adi,adv7281
+          - adi,adv7281-m
+          - adi,adv7281-ma
+          - adi,adv7282
+          - adi,adv7282-m
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  adv,force-bt656-4:
+    description:
+      Indicates that the output is a BT.656-4 compatible stream.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  ports: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adv7180
+            - adi,adv7182
+            - adi,adv7280
+            - adi,adv7280-m
+            - adi,adv7281
+            - adi,adv7281-m
+            - adi,adv7281-ma
+            - adi,adv7282
+            - adi,adv7282-m
+    then:
+      required:
+        - port
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7180cp
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@3:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-2]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@3
+
+      required:
+        - ports
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7180st
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@6:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-5]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@6
+
+      required:
+        - ports
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            composite-in@20 {
+                    compatible = "adi,adv7180";
+                    reg = <0x20>;
+
+                    port {
+                            adv7180: endpoint {
+                                    bus-width = <8>;
+                                    remote-endpoint = <&vin1ep>;
+                            };
+                    };
+            };
+
+    };
+
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            composite-in@20 {
+                    compatible = "adi,adv7180cp";
+                    reg = <0x20>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    adv7180_in: endpoint {
+                                            remote-endpoint = <&composite_con_in>;
+                                    };
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    adv7180_out: endpoint {
+                                            remote-endpoint = <&vin4_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7343.txt b/Documentation/devicetree/bindings/media/i2c/adv7343.txt
new file mode 100644
index 0000000000..5653bc2428
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv7343.txt
@@ -0,0 +1,48 @@
+* Analog Devices adv7343 video encoder
+
+The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP
+package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite
+(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard
+definition (SD), enhanced definition (ED), or high definition (HD) video
+formats.
+
+Required Properties :
+- compatible: Must be "adi,adv7343"
+
+Optional Properties :
+- adi,power-mode-sleep-mode: on enable the current consumption is reduced to
+			      micro ampere level. All DACs and the internal PLL
+			      circuit are disabled.
+- adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
+			   internal PLL 1 circuit to be powered down and the
+			   oversampling to be switched off.
+- ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6,
+			      0 = OFF and 1 = ON, Default value when this
+			      property is not specified is <0 0 0 0 0 0>.
+- ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF
+				 and 1 = ON, Default value when this property is
+				 not specified is <0 0>.
+
+Example:
+
+i2c0@1c22000 {
+	...
+	...
+
+	adv7343@2a {
+		compatible = "adi,adv7343";
+		reg = <0x2a>;
+
+		port {
+			adv7343_1: endpoint {
+					adi,power-mode-sleep-mode;
+					adi,power-mode-pll-ctrl;
+					/* Use DAC1..3, DAC6 */
+					adi,dac-enable = <1 1 1 0 0 1>;
+					/* Use SD DAC output 1 */
+					adi,sd-dac-enable = <1 0>;
+			};
+		};
+	};
+	...
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
new file mode 100644
index 0000000000..d635308140
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV748X video decoder with HDMI receiver
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The ADV7481 and ADV7482 are multi format video decoders with an integrated
+  HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+  from three input sources HDMI, analog and TTL.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7481
+          - adi,adv7482
+
+  reg:
+    minItems: 1
+    maxItems: 12
+    description:
+      The ADV748x has up to twelve 256-byte maps that can be accessed via the
+      main I2C ports. Each map has it own I2C address and acts as a standard
+      slave device on the I2C bus. The main address is mandatory, others are
+      optional and remain at default values if not specified.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+
+  interrupts: true
+
+  interrupt-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-7]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port nodes for analog inputs AIN[0-7].
+
+    properties:
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for HDMI.
+
+      port@9:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for TTL.
+
+      port@a:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXA.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@b:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXB.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                maxItems: 1
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7481
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 3
+          items:
+            enum: [ intrq1, intrq2, intrq3 ]
+    else:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ intrq1, intrq2 ]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-receiver@70 {
+            compatible = "adi,adv7482";
+            reg = <0x70 0x71 0x72 0x73 0x74 0x75
+                   0x60 0x61 0x62 0x63 0x64 0x65>;
+            reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+                        "infoframe", "cbus", "cec", "sdp", "txa", "txb";
+
+            interrupt-parent = <&gpio6>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intrq1", "intrq2";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@7 {
+                    reg = <7>;
+
+                    adv7482_ain7: endpoint {
+                        remote-endpoint = <&cvbs_in>;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+
+                    adv7482_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+
+                port@a {
+                    reg = <10>;
+
+                    adv7482_txa: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+
+                port@b {
+                    reg = <11>;
+
+                    adv7482_txb: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1>;
+                        remote-endpoint = <&csi20_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
new file mode 100644
index 0000000000..7589d377c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description:
+  The ADV7604 and ADV7610/11/12 are multiformat video decoders with
+  an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs
+  and one analog input, and the ADV7610/11 have one HDMI input and no analog
+  input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs.
+
+  These device tree bindings support the ADV7610/11/12 only at the moment.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7610
+          - adi,adv7611
+          - adi,adv7612
+
+  reg:
+    minItems: 1
+    maxItems: 13
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  hpd-gpios:
+    minItems: 1
+    description:
+      References to the GPIOs that control the HDMI hot-plug detection pins,
+      one per HDMI input. The active flag indicates the GPIO level that
+      enables hot-plug detection.
+
+  default-input:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Select which input is selected after reset.
+
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7611
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@0:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+            port@1:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          required:
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7612
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@2:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-1]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@2
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_receiver@4c {
+                    compatible = "adi,adv7611";
+                    /*
+                     * The edid page will be accessible @ 0x66 on the I2C bus. All
+                     * other maps will retain their default addresses.
+                     */
+                    reg = <0x4c>, <0x66>;
+                    reg-names = "main", "edid";
+
+                    reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
+                    hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
+                    default-input = <0>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    hdmi_in: endpoint {
+                                            remote-endpoint = <&ccdc_in>;
+                                    };
+                            };
+                    };
+
+
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 0000000000..be00de2f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 2592H x 1944V. It is programmable through a
+  simple two-wire serial interface.
+
+properties:
+  compatible:
+    enum:
+      - aptina,mt9p006
+      - aptina,mt9p031
+      - aptina,mt9p031m
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital supply voltage, 1.8 V
+
+  vdd_io-supply:
+    description: I/O supply voltage, 1.8 or 2.8 V
+
+  vaa-supply:
+    description: Analog supply voltage, 2.8 V
+
+  reset-gpios:
+    maxItems: 1
+    description: Chip reset GPIO
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          input-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 6000000
+            maximum: 96000000
+            description: Input clock frequency
+
+          pixel-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 96000000
+            description: Target pixel clock frequency
+
+          pclk-sample:
+            default: 0
+
+        required:
+          - input-clock-frequency
+          - pixel-clock-frequency
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdd-supply
+  - vdd_io-supply
+  - vaa-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mt9p031@5d {
+            compatible = "aptina,mt9p031";
+            reg = <0x5d>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            clocks = <&sensor_clk>;
+
+            vdd-supply = <&reg_vdd>;
+            vdd_io-supply = <&reg_vdd_io>;
+            vaa-supply = <&reg_vaa>;
+
+            port {
+                mt9p031_1: endpoint {
+                    input-clock-frequency = <6000000>;
+                    pixel-clock-frequency = <96000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
new file mode 100644
index 0000000000..088022f880
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina MT9V111 CMOS sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+  based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+  The sensor has an active pixel array of 640x480 pixels and can output a number
+  of image resolutions and formats controllable through a simple two-wires
+  interface.
+
+properties:
+  compatible:
+    const: aptina,mt9v111
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  enable-gpios:
+    description: Enable signal, pin name "OE#". Active low.
+    maxItems: 1
+
+  standby-gpios:
+    description: |
+      Low power state control signal, pin name "STANDBY". Active high.
+    maxItems: 1
+
+  reset-gpios:
+    description: Chip reset signal, pin name "RESET#". Active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Output video port.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@48 {
+            compatible = "aptina,mt9v111";
+            reg = <0x48>;
+            clocks = <&camera_clk>;
+
+            port {
+                mt9v111_out: endpoint {
+                    remote-endpoint = <&ceu_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
new file mode 100644
index 0000000000..22a810fc72
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/asahi-kasei,ak7375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asahi Kasei Microdevices AK7375 voice coil lens actuator
+
+maintainers:
+  - Tianshu Qiu <tian.shu.qiu@intel.com>
+
+description:
+  AK7375 is a voice coil motor (VCM) camera lens actuator that
+  is controlled over I2C.
+
+properties:
+  compatible:
+    const: asahi-kasei,ak7375
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD supply
+
+  vio-supply:
+    description: I/O pull-up supply
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ak7375: camera-lens@c {
+            compatible = "asahi-kasei,ak7375";
+            reg = <0x0c>;
+
+            vdd-supply = <&vreg_l23a_2p8>;
+            vio-supply = <&vreg_lvs1a_1p8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
new file mode 100644
index 0000000000..4e69b6a7ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chrontel HDMI-CEC Controller
+
+maintainers:
+  - Jeff Chase <jnchase@google.com>
+
+description:
+  The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
+  programmable through I2C and drives a single CEC line.
+
+allOf:
+  - $ref: /schemas/media/cec/cec-common.yaml#
+
+properties:
+  compatible:
+    const: chrontel,ch7322
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the RESET pin, if any. This
+      pin is active-low.
+    maxItems: 1
+
+  standby-gpios:
+    description:
+      Reference to the GPIO connected to the OE pin, if any. When low
+      the device will respond to power status requests with "standby"
+      if in auto mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      cec@75 {
+        compatible = "chrontel,ch7322";
+        reg = <0x75>;
+        interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+        standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+        reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+        hdmi-phandle = <&hdmi>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
new file mode 100644
index 0000000000..66229a3dc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
new file mode 100644
index 0000000000..a0855d3b75
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Dongwoon DW9768 is a single 10-bit digital-to-analog (DAC) converter
+  with 100 mA output current sink capability. VCM current is controlled with
+  a linear mode driver. The DAC is controlled via a 2-wire (I2C-compatible)
+  serial interface that operates at clock rates up to 1MHz. This chip
+  integrates Advanced Actuator Control (AAC) technology and is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    enum:
+      - dongwoon,dw9768 # for DW9768 VCM
+      - giantec,gt9769  # for GT9769 VCM
+
+  reg:
+    maxItems: 1
+
+  vin-supply:
+    description:
+      Definition of the regulator used as Digital I/O voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as Digital core voltage supply.
+
+  dongwoon,aac-mode:
+    description:
+      Indication of AAC mode select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1    #  AAC2 mode(operation time# 0.48 x Tvib)
+      - 2    #  AAC3 mode(operation time# 0.70 x Tvib)
+      - 3    #  AAC4 mode(operation time# 0.75 x Tvib)
+      - 5    #  AAC8 mode(operation time# 1.13 x Tvib)
+    default: 2
+
+  dongwoon,aac-timing:
+    description:
+      Number of AAC Timing count that controlled by one 6-bit period of
+      vibration register AACT[5:0], the unit of which is 100 us.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x20
+    minimum: 0x00
+    maximum: 0x3f
+
+  dongwoon,clock-presc:
+    description:
+      Indication of VCM internal clock dividing rate select, as one multiple
+      factor to calculate VCM ring periodic time Tvib.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0    #  Dividing Rate -  2
+      - 1    #  Dividing Rate -  1
+      - 2    #  Dividing Rate -  1/2
+      - 3    #  Dividing Rate -  1/4
+      - 4    #  Dividing Rate -  8
+      - 5    #  Dividing Rate -  4
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - vin-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dw9768: camera-lens@c {
+            compatible = "dongwoon,dw9768";
+            reg = <0x0c>;
+
+            vin-supply = <&mt6358_vcamio_reg>;
+            vdd-supply = <&mt6358_vcama2_reg>;
+            dongwoon,aac-timing = <0x39>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
new file mode 100644
index 0000000000..aae246ca3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2018, 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9807 voice coil lens driver
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+  DW9807 is a 10-bit DAC with current sink capability. It is intended for
+  controlling voice coil lenses.
+
+properties:
+  compatible:
+    const: dongwoon,dw9807-vcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lens@e {
+            compatible = "dongwoon,dw9807-vcm";
+            reg = <0x0e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
new file mode 100644
index 0000000000..1e2df8cf29
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: hynix,hi846
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference to the mclk clock.
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin. Active low.
+    maxItems: 1
+
+  shutdown-gpios:
+    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+    maxItems: 1
+
+  vddio-supply:
+    description: Definition of the regulator used for the VDDIO power supply.
+
+  vdda-supply:
+    description: Definition of the regulator used for the VDDA power supply.
+
+  vddd-supply:
+    description: Definition of the regulator used for the VDDD power supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - vddio-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hi846: camera@20 {
+            compatible = "hynix,hi846";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_csi1>;
+            clocks = <&clk 0>;
+            assigned-clocks = <&clk 0>;
+            assigned-clock-rates = <25000000>;
+            vdda-supply = <&reg_camera_vdda>;
+            vddd-supply = <&reg_camera_vddd>;
+            vddio-supply = <&reg_camera_vddio>;
+            reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+            shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+
+            port {
+                camera_out: endpoint {
+                    remote-endpoint = <&csi1_ep1>;
+                    link-frequencies = /bits/ 64
+                        <80000000 200000000>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
new file mode 100644
index 0000000000..e57575c449
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright (C) 2019 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: -|
+  The IMI D&D RDACM20 and RDACM21 are GMSL-compatible camera designed for
+  automotive applications.
+
+  The RDACM20 camera module encloses a Maxim Integrated MAX9271 GMSL serializer,
+  coupled with an OV10635 image sensor and an embedded MCU. Both the MCU and
+  the image sensor are connected to the serializer local I2C bus and are
+  accessible by the host SoC by direct addressing.
+
+  The RDACM21 camera module encloses the same serializer, coupled with an
+  OV10640 image sensor and an OV490 ISP. Only the OV490 ISP is interfaced to
+  the serializer local I2C bus while the image sensor is not accessible from
+  the host SoC.
+
+  They both connect to a remote GMSL endpoint through a coaxial cable.
+
+                                                   IMI RDACM20
+  +---------------+                        +--------------------------------+
+  |      GMSL     |   <- Video Stream      |       <- Video--------\        |
+  |               |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV10635 |
+  | de-serializer |   <- I2C messages ->   |                   \<-->MCU     |
+  +---------------+                        +--------------------------------+
+
+                                                   IMI RDACM21
+  +---------------+                        +--------------------------------+
+  |      GMSL     |   <- Video Stream      |       <- Video--------\        |
+  |               |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV490   |
+  |               |   <- I2C messages ->   |                          |     |
+  | de-serializer |                        |          OV10640 <-------|     |
+  +---------------+                        +--------------------------------+
+
+  Both camera modules serialize video data generated by the embedded camera
+  sensor on the GMSL serial channel to a remote GMSL de-serializer. They also
+  receive and transmit I2C messages encapsulated and transmitted on the GMSL
+  bidirectional control channel.
+
+  All I2C traffic received on the GMSL link not directed to the serializer is
+  propagated on the local I2C bus to the remote device there connected. All the
+  I2C traffic generated on the local I2C bus not directed to the serializer is
+  propagated to the remote de-serializer encapsulated in the GMSL control
+  channel.
+
+  The RDACM20 and RDACM21 DT node should be a direct child of the GMSL
+  deserializer's I2C bus corresponding to the GMSL link that the camera is
+  attached to.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    enum:
+      - imi,rdacm20
+      - imi,rdacm21
+
+  reg:
+    description: -|
+      I2C device addresses, the first to be assigned to the serializer, the
+      following ones to be assigned to the remote devices.
+
+      For RDACM20 the second entry of the property is assigned to the
+      OV10635 image sensor and the optional third one to the embedded MCU.
+
+      For RDACM21 the second entry is assigned to the OV490 ISP and the optional
+      third one ignored.
+
+    minItems: 2
+    maxItems: 3
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Connection to the remote GMSL endpoint.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@e66d8000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      reg = <0 0xe66d8000>;
+
+      camera@31 {
+        compatible = "imi,rdacm20";
+        reg = <0x31>, <0x41>, <0x51>;
+
+        port {
+          rdacm20_out0: endpoint {
+            remote-endpoint = <&max9286_in0>;
+          };
+        };
+      };
+    };
+
+  - |
+    i2c@e66d8000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      reg = <0 0xe66d8000>;
+
+      camera@31 {
+        compatible = "imi,rdacm21";
+        reg = <0x31>, <0x41>;
+
+        port {
+          rdacm21_out0: endpoint {
+            remote-endpoint = <&max9286_in0>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
new file mode 100644
index 0000000000..07d088cf66
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+
+description: |-
+  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
+  with an active array size of 3280H x 2464V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx219
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.2 volts
+
+  reset-gpios:
+    maxItems: 1
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed.
+              For two-lane operation the property must be set to <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous: true
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx219: sensor@10 {
+            compatible = "sony,imx219";
+            reg = <0x10>;
+            clocks = <&imx219_clk>;
+            VANA-supply = <&imx219_vana>;   /* 2.8v */
+            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+            port {
+                imx219_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <456000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
new file mode 100644
index 0000000000..80d24220ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx258.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |-
+  IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel
+  type stacked image sensor with a square pixel array of size 4208 x 3120. It
+  is programmable through I2C interface.  Image data is sent through MIPI
+  CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx258
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description:
+      Clock frequency from 6 to 27 MHz.
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the XCLR pin, if any.
+
+  vana-supply:
+    description:
+      Analog voltage (VANA) supply, 2.7 V
+
+  vdig-supply:
+    description:
+      Digital I/O voltage (VDIG) supply, 1.2 V
+
+  vif-supply:
+    description:
+      Interface voltage (VIF) supply, 1.8 V
+
+  # See ../video-interfaces.txt for more details
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6c {
+            compatible = "sony,imx258";
+            reg = <0x6c>;
+            clocks = <&imx258_clk>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <320000000>;
+                };
+            };
+        };
+    };
+
+    /* Oscillator on the camera board */
+    imx258_clk: clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <19200000>;
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6c {
+            compatible = "sony,imx258";
+            reg = <0x6c>;
+            clocks = <&imx258_clk>;
+
+            assigned-clocks = <&imx258_clk>;
+            assigned-clock-rates = <19200000>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <633600000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
new file mode 100644
index 0000000000..034a6e3466
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL79987 Analog to MIPI CSI-2 decoder
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of
+  receiving up to four analog stream and multiplexing them into up to four MIPI
+  CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl79987
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the RSTB pin (active high)
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the Power Down pin (active high)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input ports
+
+    required:
+      - port@0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl7998x_mipi@44 {
+        compatible = "isil,isl79987";
+        reg = <0x44>;
+        powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            isl79987_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&camera_0>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            endpoint {
+              remote-endpoint = <&camera_1>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt b/Documentation/devicetree/bindings/media/i2c/max2175.txt
new file mode 100644
index 0000000000..02b4e9cd7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/max2175.txt
@@ -0,0 +1,59 @@
+Maxim Integrated MAX2175 RF to Bits tuner
+-----------------------------------------
+
+The MAX2175 IC is an advanced analog/digital hybrid-radio receiver with
+RF to Bits® front-end designed for software-defined radio solutions.
+
+Required properties:
+--------------------
+- compatible: "maxim,max2175" for MAX2175 RF-to-bits tuner.
+- clocks: clock specifier.
+- port: child port node corresponding to the I2S output, in accordance with
+	the video interface bindings defined in
+	Documentation/devicetree/bindings/media/video-interfaces.txt. The port
+	node must contain at least one endpoint.
+
+Optional properties:
+--------------------
+- maxim,master	      : phandle to the master tuner if it is a slave. This
+			is used to define two tuners in diversity mode
+			(1 master, 1 slave). By default each tuner is an
+			individual master.
+- maxim,refout-load   : load capacitance value (in picofarads) on reference
+			output drive level. The possible load values are:
+			 0 (default - refout disabled)
+			10
+			20
+			30
+			40
+			60
+			70
+- maxim,am-hiz-filter : empty property indicates the AM Hi-Z filter is used
+			in this hardware for AM antenna input.
+
+Example:
+--------
+
+Board specific DTS file
+
+/* Fixed XTAL clock node */
+maxim_xtal: clock {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <36864000>;
+};
+
+/* A tuner device instance under i2c bus */
+max2175_0: tuner@60 {
+	compatible = "maxim,max2175";
+	reg = <0x60>;
+	clocks = <&maxim_xtal>;
+	maxim,refout-load = <10>;
+
+	port {
+		max2175_0_ep: endpoint {
+			remote-endpoint = <&slave_rx_device>;
+		};
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
new file mode 100644
index 0000000000..a37447256f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -0,0 +1,416 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated Quad GMSL Deserializer
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia
+  Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data
+  lanes.
+
+  In addition to video data, the GMSL links carry a bidirectional control
+  channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic
+  not addressed to itself to the other side of the links, where a GMSL
+  serializer will output it on a local I2C bus. In the other direction all I2C
+  traffic received over GMSL by the MAX9286 is output on the local I2C bus.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    const: maxim,max9286
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  poc-supply:
+    description: Regulator providing Power over Coax to all the ports
+
+  enable-gpios:
+    description: GPIO connected to the \#PWDN pin with inverted polarity
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  maxim,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 24, 27, 32 ]
+    description: |
+      The GMSL serial data bus width. This setting is normally controlled by
+      the BWS pin, but may be overridden with this property. The value must
+      match the configuration of the remote serializers.
+
+  maxim,i2c-remote-bus-hz:
+    enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ]
+    default: 105000
+    description: |
+      The I2C clock frequency for the remote I2C buses. The value must match
+      the configuration of the remote serializers.
+
+  maxim,reverse-channel-microvolt:
+    minimum: 30000
+    maximum: 200000
+    default: 170000
+    description: |
+      Initial amplitude of the reverse control channel, in micro volts.
+
+      The initial amplitude shall be adjusted to a value compatible with the
+      configuration of the connected remote serializer.
+
+      Some camera modules (for example RDACM20) include an on-board MCU that
+      pre-programs the embedded serializer with power supply noise immunity
+      (high-threshold) enabled. A typical value of the deserializer's reverse
+      channel amplitude to communicate with pre-programmed serializers is
+      170000 micro volts.
+
+      A typical value for the reverse channel amplitude to communicate with
+      a remote serializer whose high-threshold noise immunity is not enabled
+      is 100000 micro volts
+
+  maxim,gpio-poc:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+      Coax to the cameras and its associated polarity flag.
+
+      The property accepts an array of two unsigned integers, the first being
+      the gpio line index (0 or 1) and the second being the gpio line polarity
+      flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+      <include/dt-bindings/gpio/gpio.h>.
+
+      When the remote cameras power is controlled by one of the MAX9286 gpio
+      lines, this property has to be used to specify which line among the two
+      available ones controls the remote camera power enablement.
+
+      When this property is used it is not possible to register a gpio
+      controller as the gpio lines are controlled directly by the MAX9286 and
+      not available for consumers, nor the 'poc-supply' property should be
+      specified.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+    required:
+      - port@4
+
+  i2c-mux:
+    type: object
+    $ref: /schemas/i2c/i2c-mux.yaml#
+    unevaluatedProperties: false
+    description: |
+      Each GMSL link is modelled as a child bus of an i2c bus multiplexer/switch.
+
+    patternProperties:
+      "^i2c@[0-3]$":
+        type: object
+        additionalProperties: false
+        description: |
+          Child node of the i2c bus multiplexer which represents a GMSL link.
+          Each serializer device on the GMSL link remote end is represented with
+          an i2c-mux child node. The MAX9286 chip supports up to 4 GMSL
+          channels.
+
+        properties:
+          reg:
+            description: The index of the GMSL channel.
+            maxItems: 1
+
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+        patternProperties:
+          "^camera@[a-f0-9]+$":
+            type: object
+            description: |
+              The remote camera device, composed by a GMSL serializer and a
+              connected video source.
+
+            properties:
+              compatible:
+                description: The remote device compatible string.
+
+              reg:
+                minItems: 2
+                maxItems: 3
+                description: |
+                  The I2C addresses to be assigned to the remote devices through
+                  address reprogramming. The number of entries depends on the
+                  requirements of the currently connected remote device.
+
+              port:
+                $ref: /schemas/graph.yaml#/properties/port
+                description: Connection to the MAX9286 sink.
+
+            required:
+              - compatible
+              - reg
+              - port
+
+            additionalProperties: false
+
+patternProperties:
+  "^port[0-3]-poc-supply$":
+    description: Regulator providing Power over Coax for a particular port
+
+required:
+  - compatible
+  - reg
+  - ports
+  - i2c-mux
+
+allOf:
+  # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc',
+  # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is
+  # present, then 'gpio-controller' isn't allowed.
+  - if:
+      required:
+        - maxim,gpio-poc
+    then:
+      properties:
+        poc-supply: false
+        gpio-controller: false
+      patternProperties:
+        "^port[0-3]-poc-supply$": false
+
+  - if:
+      required:
+        - poc-supply
+    then:
+      patternProperties:
+        "^port[0-3]-poc-supply$": false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c@e66d8000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reg = <0 0xe66d8000>;
+
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            maxim,i2c-remote-bus-hz = <339000>;
+            maxim,reverse-channel-microvolt = <170000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+            };
+
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
+
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
+
+                    };
+                };
+
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
+
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
+
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+
+        /*
+        * Example of a deserializer that controls the camera Power over Coax
+        * through one of its gpio lines.
+        */
+        gmsl-deserializer@6c {
+            compatible = "maxim,max9286";
+            reg = <0x6c>;
+            enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+            /*
+            * The remote camera power is controlled by MAX9286 GPIO line #0.
+            * No 'poc-supply' nor 'gpio-controller' are specified.
+            */
+            maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+            /*
+            * Do not describe connections as they're the same as in the previous
+            * example.
+            */
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@4 {
+                    reg = <4>;
+                };
+            };
+
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
new file mode 100644
index 0000000000..6c72e77b92
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI
+  CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96712 can accommodate as many as
+  four remotely located sensors using industry-standard coax or STP
+  interconnects.
+
+  Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the
+  MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1
+  serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
+
+properties:
+  compatible:
+    const: maxim,max96712
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  enable-gpios: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+              - bus-type
+
+    required:
+      - port@4
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0 0xe6508000>;
+
+            gmsl0: gmsl-deserializer@49 {
+                    compatible = "maxim,max96712";
+                    reg = <0x49>;
+                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@4 {
+                                    reg = <4>;
+                                    max96712_out0: endpoint {
+                                            bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                                            clock-lanes = <0>;
+                                            data-lanes = <1 2 3 4>;
+                                            remote-endpoint = <&csi40_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
new file mode 100644
index 0000000000..060d2b7a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/melexis,mlx90640.txt
@@ -0,0 +1,20 @@
+* Melexis MLX90640 FIR Sensor
+
+Melexis MLX90640 FIR sensor support which allows recording of thermal data
+with 32x24 resolution excluding 2 lines of coefficient data that is used by
+userspace to render processed frames.
+
+Required Properties:
+ - compatible : Must be "melexis,mlx90640"
+ - reg : i2c address of the device
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		mlx90640@33 {
+			compatible = "melexis,mlx90640";
+			reg = <0x33>;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
new file mode 100644
index 0000000000..f8ace8cbcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2014--2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/mipi-ccs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI CCS, SMIA++ and SMIA compliant camera sensors
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description:
+
+  CCS (Camera Command Set) is a raw Bayer camera sensor standard defined by the
+  MIPI Alliance; see
+  <URL:https://www.mipi.org/specifications/camera-command-set>.
+
+  SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+  defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension of
+  that.
+
+  More detailed documentation can be found in
+  Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mipi-ccs-1.1
+          - const: mipi-ccs
+      - items:
+          - const: mipi-ccs-1.0
+          - const: mipi-ccs
+      - const: nokia,smia
+
+  reg:
+    maxItems: 1
+
+  vana-supply:
+    description: Analogue voltage supply (VANA), sensor dependent.
+
+  vcore-supply:
+    description: Core voltage supply (VCore), sensor dependent.
+
+  vio-supply:
+    description: I/O voltage supply (VIO), sensor dependent.
+
+  clocks:
+    description: External clock to the sensor.
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of the external clock to the sensor in Hz.
+
+  reset-gpios:
+    description: Reset GPIO. Also commonly called XSHUTDOWN in hardware
+      documentation.
+    maxItems: 1
+
+  flash-leds:
+    description: Flash LED phandles. See ../video-interfaces.txt for details.
+
+  lens-focus:
+    description: Lens focus controller phandles. See ../video-interfaces.txt
+      for details.
+
+  rotation:
+    description: Rotation of the sensor.  See ../video-interfaces.txt for
+      details.
+    enum: [ 0, 180 ]
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+          data-lanes: true
+          bus-type:
+            enum:
+              - 1 # CSI-2 C-PHY
+              - 3 # CCP2
+              - 4 # CSI-2 D-PHY
+
+        required:
+          - link-frequencies
+          - data-lanes
+          - bus-type
+
+required:
+  - compatible
+  - reg
+  - clock-frequency
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-frequency = <400000>;
+
+        camera-sensor@10 {
+            compatible = "mipi-ccs-1.0", "mipi-ccs";
+            reg = <0x10>;
+            reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+            vana-supply = <&vaux3>;
+            clocks = <&omap3_isp 0>;
+            clock-frequency = <9600000>;
+            port {
+                ccs_ep: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&csi2a_ep>;
+                    link-frequencies = /bits/ 64 <199200000 210000000
+                                                  499200000>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
new file mode 100644
index 0000000000..c920552b03
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
@@ -0,0 +1,38 @@
+MT9M001: 1/2-Inch Megapixel Digital Image Sensor
+
+The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital
+image sensor. It is programmable through I2C interface.
+
+Required Properties:
+
+- compatible: shall be "onnn,mt9m001".
+- clocks: reference to the master clock into sensor
+
+Optional Properties:
+
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+  Active low.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
+  Active high.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	&i2c1 {
+		camera-sensor@5d {
+			compatible = "onnn,mt9m001";
+			reg = <0x5d>;
+			reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			clocks = <&camera_clk>;
+			port {
+				mt9m001_out: endpoint {
+					remote-endpoint = <&vcap_in>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
new file mode 100644
index 0000000000..d0bed6fa90
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
@@ -0,0 +1,37 @@
+Micron 1.3Mp CMOS Digital Image Sensor
+
+The Micron MT9M111 is a CMOS active pixel digital image sensor with an active
+array size of 1280H x 1024V. It is programmable through a simple two-wire serial
+interface.
+
+Required Properties:
+- compatible: value should be "micron,mt9m111"
+- clocks: reference to the master clock.
+- clock-names: shall be "mclk".
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Optional endpoint properties:
+- pclk-sample: For information see ../video-interfaces.txt. The value is set to
+  0 if it isn't specified.
+
+Example:
+
+	i2c_master {
+		mt9m111@5d {
+			compatible = "micron,mt9m111";
+			reg = <0x5d>;
+			clocks = <&mclk>;
+			clock-names = "mclk";
+
+			port {
+				mt9m111_1: endpoint {
+					remote-endpoint = <&pxa_camera>;
+					pclk-sample = <1>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
new file mode 100644
index 0000000000..100f0ae432
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
@@ -0,0 +1,41 @@
+* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
+
+The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
+an active array size of 752H x 480V. It is programmable through a simple
+two-wire serial interface.
+
+Required Properties:
+
+- compatible: value should be either one among the following
+	(a) "aptina,mt9v022" for MT9V022 color sensor
+	(b) "aptina,mt9v022m" for MT9V022 monochrome sensor
+	(c) "aptina,mt9v024" for MT9V024 color sensor
+	(d) "aptina,mt9v024m" for MT9V024 monochrome sensor
+	(e) "aptina,mt9v032" for MT9V032 color sensor
+	(f) "aptina,mt9v032m" for MT9V032 monochrome sensor
+	(g) "aptina,mt9v034" for MT9V034 color sensor
+	(h) "aptina,mt9v034m" for MT9V034 monochrome sensor
+
+Optional Properties:
+
+- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
+	expressed as a 64-bit big-endian integer.
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	mt9v032@5c {
+		compatible = "aptina,mt9v032";
+		reg = <0x5c>;
+
+		port {
+			mt9v032_out: endpoint {
+				link-frequencies = /bits/ 64
+					<13000000 26600000 27000000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
new file mode 100644
index 0000000000..b617cc5c6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0521 MIPI CSI-2 sensor
+
+maintainers:
+  - Krzysztof Hałasa <khalasa@piap.pl>
+
+description: |-
+  The AR0521 is a raw CMOS image sensor with MIPI CSI-2 and
+  I2C-compatible control interface.
+
+properties:
+  compatible:
+    const: onnn,ar0521
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vaa-supply:
+    description:
+      Definition of the regulator used as analog (2.7 V) voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as digital core (1.2 V) voltage supply.
+
+  vdd_io-supply:
+    description:
+      Definition of the regulator used as digital I/O (1.8 V) voltage supply.
+
+  reset-gpios:
+    description: reset GPIO, usually active low
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vaa-supply
+  - vdd-supply
+  - vdd_io-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ar0521: camera-sensor@36 {
+                    compatible = "onnn,ar0521";
+                    reg = <0x36>;
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_mipi_camera>;
+                    clocks = <&clks IMX6QDL_CLK_CKO>;
+                    clock-names = "extclk";
+                    reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                    vaa-supply = <&reg_2p7v>;
+                    vdd-supply = <&reg_1p2v>;
+                    vdd_io-supply = <&reg_1p8v>;
+
+                    port {
+                           mipi_camera_to_mipi_csi2: endpoint {
+                                    remote-endpoint = <&mipi_csi2_in>;
+                                    data-lanes = <1 2 3 4>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
new file mode 100644
index 0000000000..989ce6cb6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
@@ -0,0 +1,41 @@
+* Omnivision OV2640 CMOS sensor
+
+The Omnivision OV2640 sensor supports multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
+output formats.
+
+Required Properties:
+- compatible: should be "ovti,ov2640"
+- clocks: reference to the xvclk input clock.
+- clock-names: should be "xvclk".
+
+Optional Properties:
+- resetb-gpios: reference to the GPIO connected to the resetb pin, if any.
+- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c1: i2c@f0018000 {
+		ov2640: camera@30 {
+			compatible = "ovti,ov2640";
+			reg = <0x30>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+			resetb-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
+			pwdn-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			clocks = <&pck0>;
+			clock-names = "xvclk";
+			assigned-clocks = <&pck0>;
+			assigned-clock-rates = <25000000>;
+
+			port {
+				ov2640_0: endpoint {
+					remote-endpoint = <&isi_0>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ov2659.txt
new file mode 100644
index 0000000000..92989a619f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov2659.txt
@@ -0,0 +1,47 @@
+* OV2659 1/5-Inch 2Mp SOC Camera
+
+The Omnivision OV2659 is a 1/5-inch SOC camera, with an active array size of
+1632H x 1212V. It is programmable through a SCCB. The OV2659 sensor supports
+multiple resolutions output, such as UXGA, SVGA, 720p. It also can support
+YUV422, RGB565/555 or raw RGB output formats.
+
+Required Properties:
+- compatible: Must be "ovti,ov2659"
+- reg: I2C slave address
+- clocks: reference to the xvclk input clock.
+- clock-names: should be "xvclk".
+- link-frequencies: target pixel clock frequency.
+
+Optional Properties:
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
+  Active high with internal pull down resistor.
+- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
+  Active low with internal pull up resistor.
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		 ov2659@30 {
+			compatible = "ovti,ov2659";
+			reg = <0x30>;
+
+			clocks = <&clk_ov2659 0>;
+			clock-names = "xvclk";
+
+			powerdown-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+			port {
+				ov2659_0: endpoint {
+					remote-endpoint = <&vpfe_ep>;
+					link-frequencies = /bits/ 64 <70000000>;
+				};
+			};
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
new file mode 100644
index 0000000000..2c972a56f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
@@ -0,0 +1,55 @@
+* Omnivision OV7670 CMOS sensor
+
+The Omnivision OV7670 sensor supports multiple resolutions output, such as
+CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
+output formats.
+
+Required Properties:
+- compatible: should be "ovti,ov7670"
+- clocks: reference to the xclk input clock.
+- clock-names: should be "xclk".
+
+Required Endpoint Properties:
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
+  Active is low.
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
+  Active is high.
+- ov7670,pclk-hb-disable: a boolean property to suppress pixel clock output
+  signal during horizontal blankings.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c1: i2c@f0018000 {
+		ov7670: camera@21 {
+			compatible = "ovti,ov7670";
+			reg = <0x21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+			reset-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			clocks = <&pck0>;
+			clock-names = "xclk";
+			assigned-clocks = <&pck0>;
+			assigned-clock-rates = <25000000>;
+
+			ov7670,pclk-hb-disable;
+
+			port {
+				ov7670_0: endpoint {
+					hsync-active = <0>;
+					vsync-active = <0>;
+
+					remote-endpoint = <&isi_0>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
new file mode 100644
index 0000000000..af781c3a5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt
@@ -0,0 +1,47 @@
+* Omnivision OV7740 CMOS image sensor
+
+The Omnivision OV7740 image sensor supports multiple output image
+size, such as VGA, and QVGA, CIF and any size smaller. It also
+supports the RAW RGB and YUV output formats.
+
+The common video interfaces bindings (see video-interfaces.txt) should
+be used to specify link to the image data receiver. The OV7740 device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Required Properties:
+- compatible:	"ovti,ov7740".
+- reg:		I2C slave address of the sensor.
+- clocks:	Reference to the xvclk input clock.
+- clock-names:	"xvclk".
+
+Optional Properties:
+- reset-gpios: Rreference to the GPIO connected to the reset_b pin,
+  if any. Active low with pull-ip resistor.
+- powerdown-gpios: Reference to the GPIO connected to the pwdn pin,
+  if any. Active high with pull-down resistor.
+
+Endpoint node mandatory properties:
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+Example:
+
+	i2c1: i2c@fc028000 {
+		ov7740: camera@21 {
+			compatible = "ovti,ov7740";
+			reg = <0x21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>;
+			clocks = <&isc>;
+			clock-names = "xvclk";
+			assigned-clocks = <&isc>;
+			assigned-clock-rates = <24000000>;
+			reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>;
+			powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>;
+
+			port {
+				ov7740_0: endpoint {
+					remote-endpoint = <&isc_0>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 0000000000..57f5e48fd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |-
+  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface. This chip is programmable
+  through I2C and two-wire SCCB. The sensor output is available via CSI-2
+  serial data output (up to 4-lane).
+
+properties:
+  compatible:
+    const: ovti,ov8856
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  clock-frequency:
+    description:
+      Frequency of the xvclk clock in Hertz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description: |-
+              The driver only supports four-lane operation.
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          link-frequencies:
+            description: Frequencies listed are driver, not h/w limitations.
+            maxItems: 2
+            items:
+              enum: [ 360000000, 180000000 ]
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8856: camera@10 {
+            compatible = "ovti,ov8856";
+            reg = <0x10>;
+
+            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cam_osc>;
+            clock-names = "xvclk";
+            clock-frequency = <19200000>;
+
+            avdd-supply = <&mt6358_vcama2_reg>;
+            dvdd-supply = <&mt6358_vcamd_reg>;
+            dovdd-supply = <&mt6358_vcamio_reg>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ov9650.txt b/Documentation/devicetree/bindings/media/i2c/ov9650.txt
new file mode 100644
index 0000000000..506dfc5287
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov9650.txt
@@ -0,0 +1,36 @@
+* Omnivision OV9650/OV9652 CMOS sensor
+
+Required Properties:
+- compatible: shall be one of
+	"ovti,ov9650"
+	"ovti,ov9652"
+- clocks: reference to the xvclk input clock.
+
+Optional Properties:
+- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
+  Active is high.
+- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
+  Active is high.
+
+The device node shall contain one 'port' child node with one child 'endpoint'
+subnode for its digital output video port, in accordance with the video
+interface bindings defined in Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+&i2c0 {
+	ov9650: camera@30 {
+		compatible = "ovti,ov9650";
+		reg = <0x30>;
+		reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_HIGH>;
+		clocks = <&xclk>;
+
+		port {
+			ov9650_0: endpoint {
+				remote-endpoint = <&vcap1_in0>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
new file mode 100644
index 0000000000..763cebe03d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV02A10 CMOS Sensor
+
+maintainers:
+  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+  The Omnivision OV02A10 is a low-cost, high performance, 1/5-inch, 2 megapixel
+  image sensor, which is the latest production derived from Omnivision's CMOS
+  image sensor technology. Ihis chip supports high frame rate speeds up to 30fps
+  @ 1600x1200 (UXGA) resolution transferred over a 1-lane MIPI interface. The
+  sensor output is available via CSI-2 serial data output.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov02a10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      External clock for the sensor.
+    items:
+      - const: eclk
+
+  clock-frequency:
+    description:
+      Frequency of the eclk clock in Hz.
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as Digital I/O voltage supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as Analog voltage supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as Digital core voltage supply.
+
+  powerdown-gpios:
+    description:
+      Must be the device tree identifier of the GPIO connected to the
+      PD_PAD pin. This pin is used to place the OV02A10 into standby mode
+      or shutdown mode. As the line needs to be high for the powerdown mode
+      to be active, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the GPIO connected to the
+      RST_PD pin. If specified, it will be asserted during driver probe.
+      As the line needs to be low for the reset to be active, it should be
+      marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  rotation:
+    enum:
+      - 0    # Sensor Mounted Upright
+      - 180  # Sensor Mounted Upside Down
+    default: 0
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+          ovti,mipi-clock-voltage:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Definition of MIPI clock voltage unit. This entry corresponds to
+              the link speed defined by the 'link-frequencies' property.
+              If present, the value shall be in the range of 0-4.
+            default: 4
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - powerdown-gpios
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov02a10: camera-sensor@3d {
+            compatible = "ovti,ov02a10";
+            reg = <0x3d>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
+
+            clocks = <&ov02a10_clk>;
+            clock-names = "eclk";
+            clock-frequency = <24000000>;
+
+            rotation = <180>;
+
+            dovdd-supply = <&ov02a10_dovdd>;
+            avdd-supply = <&ov02a10_avdd>;
+            dvdd-supply = <&ov02a10_dvdd>;
+
+            port {
+                wcam_out: endpoint {
+                    link-frequencies = /bits/ 64 <390000000>;
+                    ovti,mipi-clock-voltage = <3>;
+                    remote-endpoint = <&mipi_in_wcam>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
new file mode 100644
index 0000000000..cf456f8d9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV2680 CMOS Sensor
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |-
+  The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
+  megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
+  camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
+  various formats via the control of the Serial Camera Control Bus (SCCB)
+  interface. The OV2680 has an image array capable of operating at up to 30
+  frames per second (fps) in UXGA resolution.
+
+properties:
+  compatible:
+    const: ovti,ov2680
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xvclk
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A node containing an output port node.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2680: camera-sensor@36 {
+                compatible = "ovti,ov2680";
+                reg = <0x36>;
+                clocks = <&osc>;
+                clock-names = "xvclk";
+                reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+                dovdd-supply = <&sw2_reg>;
+                dvdd-supply = <&sw2_reg>;
+                avdd-supply = <&reg_peri_3p15v>;
+
+                port {
+                        ov2680_to_mipi: endpoint {
+                                remote-endpoint = <&mipi_from_sensor>;
+                        };
+                };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
new file mode 100644
index 0000000000..e2ffe0a9c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2685 Image Sensor
+
+maintainers:
+  - Shunqian Zheng <zhengsq@rock-chips.com>
+
+properties:
+  compatible:
+    const: ovti,ov2685
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK clock
+
+  clock-names:
+    items:
+      - const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dvdd-supply
+  - avdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2685: camera-sensor@3c {
+            compatible = "ovti,ov2685";
+            reg = <0x3c>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cru SCLK_TESTCLKOUT1>;
+            clock-names = "xvclk";
+
+            avdd-supply = <&pp2800_cam>;
+            dovdd-supply = <&pp1800>;
+            dvdd-supply = <&pp1800>;
+            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
new file mode 100644
index 0000000000..50579c947f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV4689 CMOS
+
+maintainers:
+  - Mikhail Rudenko <mike.rudenko@gmail.com>
+
+description: |
+  The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
+  image sensor. Ihis chip supports high frame rate speeds up to 90 fps
+  at 2688x1520 resolution. It is programmable through an I2C
+  interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
+  connection.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov4689
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      External clock (XVCLK) for the sensor, 6-64 MHz
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.7-3.0 V
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.6-3.0 V
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.1-1.3 V
+
+  powerdown-gpios:
+    description:
+      GPIO connected to the powerdown pin (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the reset pin (active low)
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov4689: camera@36 {
+            compatible = "ovti,ov4689";
+            reg = <0x36>;
+
+            clocks = <&ov4689_clk>;
+
+            avdd-supply = <&ov4689_avdd>;
+            dovdd-supply = <&ov4689_dovdd>;
+            dvdd-supply = <&ov4689_dvdd>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <504000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
new file mode 100644
index 0000000000..a621032f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5640 Image Sensor
+
+maintainers:
+  - Steve Longerbeam <slongerbeam@gmail.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5640
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-names:
+    const: xclk
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  DOVDD-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+    description: >
+      Reference to the GPIO connected to the powerdown pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description: >
+      Reference to the GPIO connected to the reset pin, if any.
+
+  rotation:
+    enum:
+      - 0
+      - 180
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            const: 0
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          bus-width:
+            enum: [8, 10]
+
+          data-shift:
+            enum: [0, 2]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - AVDD-supply
+  - DVDD-supply
+  - DOVDD-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/imx6qdl-clock.h>
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5640";
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5640>;
+              reg = <0x3c>;
+              clocks = <&clks IMX6QDL_CLK_CKO>;
+              clock-names = "xclk";
+              DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+              AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+              DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+              powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+
+              port {
+                  /* MIPI CSI-2 bus endpoint */
+                  ov5640_to_mipi_csi2: endpoint {
+                      remote-endpoint = <&mipi_csi2_from_ov5640>;
+                      clock-lanes = <0>;
+                      data-lanes = <1 2>;
+                  };
+              };
+          };
+      };
+
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5640";
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5640>;
+              reg = <0x3c>;
+              clocks = <&clk_ext_camera>;
+              clock-names = "xclk";
+              DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+              AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+              DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+
+              port {
+                  /* Parallel bus endpoint */
+                  ov5640_to_parallel: endpoint {
+                      remote-endpoint = <&parallel_from_ov5640>;
+                      bus-width = <8>;
+                      data-shift = <2>; /* lines 9:2 are used */
+                      hsync-active = <0>;
+                      vsync-active = <0>;
+                      pclk-sample = <1>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
new file mode 100644
index 0000000000..bc9b27afe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5645.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5645 Image Sensor
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+properties:
+  compatible:
+    const: ovti,ov5645
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the PWDNB pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESETB pin, if any.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov5645";
+            reg = <0x3c>;
+            clocks = <&clks 1>;
+            clock-frequency = <24000000>;
+            vdddo-supply = <&ov5645_vdddo_1v8>;
+            vdda-supply = <&ov5645_vdda_2v8>;
+            vddd-supply = <&ov5645_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_ov5645>;
+
+            port {
+                ov5645_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
new file mode 100644
index 0000000000..a2abed06a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5647.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5647 raw image sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |-
+  The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: ovti,ov5647
+
+  reg:
+    description: I2C device address.
+    maxItems: 1
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  pwdn-gpios:
+    description: Reference to the GPIO connected to the pwdn pin. Active high.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-noncontinuous: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5647: camera@36 {
+            compatible = "ovti,ov5647";
+            reg = <0x36>;
+            clocks = <&camera_clk>;
+            pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+
+            port {
+                camera_out: endpoint {
+                    remote-endpoint = <&csi1_ep1>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
new file mode 100644
index 0000000000..1f49767916
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5648 Image Sensor
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: ovti,ov5648
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK Clock
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply (internal AVDD is used if missing)
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Power Down Pin GPIO Control (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - dvdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5648: camera@36 {
+            compatible = "ovti,ov5648";
+            reg = <0x36>;
+
+            dvdd-supply = <&ov5648_dvdd>;
+            avdd-supply = <&ov5648_avdd>;
+            dovdd-supply = <&ov5648_dovdd>;
+            clocks = <&ov5648_xvclk 0>;
+            assigned-clocks = <&ov5648_xvclk 0>;
+            assigned-clock-rates = <24000000>;
+
+
+            ov5648_out: port {
+                ov5648_out_mipi_csi2: endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <210000000 168000000>;
+
+                    remote-endpoint = <&mipi_csi2_in_ov5648>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
new file mode 100644
index 0000000000..6e089fe1d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5670 5 Megapixels raw image sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+description: |-
+  The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits
+  RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is
+  controlled through an I2C compatible control bus.
+
+properties:
+  compatible:
+    const: ovti,ov5670
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: System clock. From 6 to 27 MHz.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: Reference to the GPIO connected to the PWDNB pin. Active low.
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog circuit power. Typically 2.8V.
+
+  dvdd-supply:
+    description: Digital circuit power. Typically 1.2V.
+
+  dovdd-supply:
+    description: Digital I/O circuit power. Typically 2.8V or 1.8V.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5670: sensor@36 {
+            compatible = "ovti,ov5670";
+            reg = <0x36>;
+
+            clocks = <&sensor_xclk>;
+
+            port {
+                ov5670_ep: endpoint {
+                    remote-endpoint = <&csi_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
new file mode 100644
index 0000000000..ad07204057
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5675 CMOS Sensor
+
+maintainers:
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+description: |
+  The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  This chip is programmable through I2C and two-wire SCCB. The sensor output
+  is available via CSI-2 serial data output (up to 2-lane).
+
+properties:
+  compatible:
+    const: ovti,ov5675
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8 volts.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2 volts.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+          # Supports max data transfer of 900 Mbps per lane
+          link-frequencies: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5675: camera@36 {
+            compatible = "ovti,ov5675";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 0000000000..6829a4aadd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693/OV5695 CMOS Sensors
+
+maintainers:
+  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+
+description: |
+  The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS
+  image sensors that deliver 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus
+  (SCCB). The sensor output is available via CSI-2 serial data output (up to
+  2-lane).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ovti,ov5693
+    then:
+      properties:
+        port:
+          properties:
+            endpoint:
+              required:
+                - link-frequencies
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov5693
+      - ovti,ov5695
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  clock-names:
+    const: xvclk
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8V.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8V.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2V.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5693: camera@36 {
+            compatible = "ovti,ov5693";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
new file mode 100644
index 0000000000..2e5187acbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV7251 Image Sensor
+
+description:
+  The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
+  with an active array size of 640H x 480V. It is programmable through a serial
+  I2C interface.
+
+maintainers:
+  - Todor Tomov <todor.too@gmail.com>
+
+properties:
+  compatible:
+    const: ovti,ov7251
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-names:
+    const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity
+      is GPIO_ACTIVE_HIGH.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            maximum: 1
+
+          data-lanes:
+            maxItems: 1
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov7251";
+            reg = <0x3c>;
+            clocks = <&clks 1>;
+            clock-frequency = <24000000>;
+            vdddo-supply = <&ov7251_vdddo_1v8>;
+            vdda-supply = <&ov7251_vdda_2v8>;
+            vddd-supply = <&ov7251_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+
+            port {
+                ov7251_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    clock-lanes = <1>;
+                    data-lanes = <0>;
+                    link-frequencies = /bits/ 64 <240000000 319200000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
new file mode 100644
index 0000000000..5d24edba8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov772x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV7720/OV7725 CMOS sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
+  such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
+  support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov7720
+      - ovti,ov7725
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    description: |
+      Reference to the GPIO connected to the RSTB pin which is active low.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: |
+      Reference to the GPIO connected to the PWDN pin which is active high.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          bus-width:
+            enum: [8, 10]
+            default: 10
+
+          data-shift:
+            enum: [0, 2]
+            default: 0
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+
+          - if:
+              properties:
+                bus-width:
+                  const: 10
+            then:
+              properties:
+                data-shift:
+                  const: 0
+
+        required:
+          - bus-type
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ov772x: camera@21 {
+            compatible = "ovti,ov7725";
+            reg = <0x21>;
+            reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
+            powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
+            clocks = <&xclk>;
+
+            port {
+                ov772x_0: endpoint {
+                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+                    vsync-active = <0>;
+                    hsync-active = <0>;
+                    pclk-sample = <0>;
+                    bus-width = <8>;
+                    data-shift = <0>;
+                    remote-endpoint = <&vcap1_in0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
new file mode 100644
index 0000000000..a65f921ec0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8858 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+  - Nicholas Roth <nicholas@rothemail.net>
+
+description: |
+  The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor
+  controlled through an I2C-compatible SCCB bus. The sensor transmits images
+  on a MIPI CSI-2 output interface with up to 4 data lanes.
+
+properties:
+  compatible:
+    const: ovti,ov8858
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: XVCLK external clock
+
+  clock-names:
+    const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    description: PWDNB powerdown GPIO (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: XSHUTDN reset GPIO (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8858: camera@36 {
+            compatible = "ovti,ov8858";
+            reg = <0x36>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            clock-names = "xvclk";
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <24000000>;
+
+            dovdd-supply = <&vcc1v8_dvp>;
+
+            reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+            powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
new file mode 100644
index 0000000000..8a70e23ba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8865 Image Sensor
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: ovti,ov8865
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: EXTCLK Clock
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Power Down Pin GPIO Control (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - dvdd-supply
+  - avdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8865: camera@36 {
+            compatible = "ovti,ov8865";
+            reg = <0x36>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&csi_mclk_pin>;
+
+            clocks = <&ccu CLK_CSI_MCLK>;
+            assigned-clocks = <&ccu CLK_CSI_MCLK>;
+            assigned-clock-rates = <24000000>;
+
+            avdd-supply = <&reg_ov8865_avdd>;
+            dovdd-supply = <&reg_ov8865_dovdd>;
+            dvdd-supply = <&reg_ov8865_dvdd>;
+
+            powerdown-gpios = <&pio 4 17 GPIO_ACTIVE_LOW>; /* PE17 */
+            reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+
+            port {
+                ov8865_out_mipi_csi2: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+
+                    remote-endpoint = <&mipi_csi2_in_ov8865>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
new file mode 100644
index 0000000000..79a7658f6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov9282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV9282 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  OV9282 sensor is an OmniVision black & white CMOS active pixel digital image
+  sensor with an active array size of 1296H x 816V. It is programmable through
+  I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data
+  sheet. Image data is sent through MIPI CSI-2.
+  OV9281 has a different lens chief ray angle.
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov9281
+      - ovti,ov9282
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@60 {
+            compatible = "ovti,ov9282";
+            reg = <0x60>;
+            clocks = <&ov9282_clk>;
+
+            assigned-clocks = <&ov9282_clk>;
+            assigned-clock-parents = <&ov9282_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                ov9282: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <800000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/panasonic,amg88xx.txt b/Documentation/devicetree/bindings/media/i2c/panasonic,amg88xx.txt
new file mode 100644
index 0000000000..4a3181a3dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/panasonic,amg88xx.txt
@@ -0,0 +1,19 @@
+* Panasonic AMG88xx
+
+The Panasonic family of AMG88xx Grid-Eye sensors allow recording
+8x8 10Hz video which consists of thermal datapoints
+
+Required Properties:
+ - compatible : Must be "panasonic,amg88xx"
+ - reg : i2c address of the device
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		amg88xx@69 {
+			compatible = "panasonic,amg88xx";
+			reg = <0x69>;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
new file mode 100644
index 0000000000..34a05df786
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/rda,rda5807.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Communications RDA5807 FM radio receiver
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    enum:
+      - rda,rda5807
+
+  reg:
+    description: I2C address.
+    maxItems: 1
+
+  power-supply: true
+
+  rda,lnan:
+    description: Use LNAN input port.
+    type: boolean
+
+  rda,lnap:
+    description: Use LNAP input port.
+    type: boolean
+
+  rda,analog-out:
+    description: Enable analog audio output.
+    type: boolean
+
+  rda,i2s-out:
+    description: Enable I2S digital audio output.
+    type: boolean
+
+  rda,lna-microamp:
+    description: LNA working current, in micro-amperes.
+    default: 2500
+    enum: [1800, 2100, 2500, 3000]
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      radio@11 {
+        compatible = "rda,rda5807";
+        reg = <0x11>;
+
+        power-supply = <&ldo6>;
+
+        rda,lnan;
+        rda,lnap;
+        rda,analog-out;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
new file mode 100644
index 0000000000..c8f2955e08
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: samsung,s5k5baf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  clock-frequency:
+    default: 24000000
+    description: mclk clock frequency
+
+  rstn-gpios:
+    maxItems: 1
+    description: RSTN pin
+
+  stbyn-gpios:
+    maxItems: 1
+    description: STDBYN pin
+
+  vdda-supply:
+    description: Analog power supply 2.8V (2.6V to 3.0V)
+
+  vddio-supply:
+    description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V)
+
+  vddreg-supply:
+    description:
+      Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0)
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rstn-gpios
+  - stbyn-gpios
+  - vdda-supply
+  - vddio-supply
+  - vddreg-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@2d {
+            compatible = "samsung,s5k5baf";
+            reg = <0x2d>;
+            clocks = <&camera 0>;
+            clock-names = "mclk";
+            clock-frequency = <24000000>;
+            rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+            stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+            vdda-supply = <&cam_io_en_reg>;
+            vddio-supply = <&vtcam_reg>;
+            vddreg-supply = <&vt_core_15v_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
new file mode 100644
index 0000000000..7e83a94124
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: samsung,s5k6a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: extclk
+
+  clock-frequency:
+    default: 24000000
+    description: extclk clock frequency
+
+  gpios:
+    maxItems: 1
+    description: GPIO connected to the RESET pin
+
+  afvdd-supply:
+    description: AF (actuator) voltage supply
+
+  svdda-supply:
+    description: Core voltage supply
+
+  svddio-supply:
+    description: I/O voltage supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - gpios
+  - afvdd-supply
+  - svdda-supply
+  - svddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@10 {
+            compatible = "samsung,s5k6a3";
+            reg = <0x10>;
+            clock-frequency = <24000000>;
+            clocks = <&camera 1>;
+            clock-names = "extclk";
+            gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+            afvdd-supply = <&ldo19_reg>;
+            svdda-supply = <&cam_io_reg>;
+            svddio-supply = <&ldo19_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
new file mode 100644
index 0000000000..e2470dd592
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor
+
+maintainers:
+  - Ricardo Ribalda <ribalda@kernel.org>
+
+description: |
+  The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with
+  an active array size of 4224H x 3200V. It is programmable through an I2C
+  interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
+  maximum throughput of 1.2Gbps/lane.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx214
+
+  reg:
+    enum:
+      - 0x10
+      - 0x1a
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  enable-gpios:
+    description: GPIO descriptor for the enable pin.
+    maxItems: 1
+
+  vdddo-supply:
+    description: Chip digital IO regulator (1.8V).
+
+  vdda-supply:
+    description: Chip analog regulator (2.7V).
+
+  vddd-supply:
+    description: Chip digital core regulator (1.12V).
+
+  flash-leds: true
+  lens-focus: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-frequency
+  - enable-gpios
+  - vdddo-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@1a {
+            compatible = "sony,imx214";
+            reg = <0x1a>;
+            vdddo-supply = <&pm8994_lvs1>;
+            vddd-supply = <&camera_vddd_1v12>;
+            vdda-supply = <&pm8994_l17>;
+            lens-focus = <&ad5820>;
+            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+            clocks = <&camera_clk>;
+            clock-frequency = <24000000>;
+
+            port {
+                imx214_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <480000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
new file mode 100644
index 0000000000..b397a730ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx274.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/2.5-Inch 8.51MP CMOS Digital Image Sensor
+
+maintainers:
+  - Leon Luo <leonl@leopardimaging.com>
+
+description: |
+  The Sony IMX274 is a 1/2.5-inch CMOS active pixel digital image sensor with an
+  active array size of 3864H x 2202V. It is programmable through I2C interface.
+  Image data is sent through MIPI CSI-2, which is configured as 4 lanes at 1440
+  Mbps.
+
+properties:
+  compatible:
+    const: sony,imx274
+
+  reg:
+    const: 0x1a
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: inck
+
+  vana-supply:
+    description: Sensor 2.8 V analog supply.
+
+  vdig-supply:
+    description: Sensor 1.8 V digital core supply.
+
+  vddl-supply:
+    description: Sensor digital IO 1.2 V supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx274: camera-sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            port {
+                sensor_out: endpoint {
+                    remote-endpoint = <&csiss_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
new file mode 100644
index 0000000000..a531badc16
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX290 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
+  Pixel, available in either mono or colour variants. It is programmable
+  through I2C and 4-wire interfaces.
+
+  The sensor output is available via CMOS logic parallel SDR output, Low voltage
+  LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default.
+  No bindings have been defined for the other busses.
+
+  imx290lqr is the full model identifier for the colour variant. "sony,imx290"
+  is treated the same as this as it was the original compatible string.
+  imx290llr is the mono version of the sensor.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sony,imx290lqr # Colour
+          - sony,imx290llr # Monochrome
+          - sony,imx327lqr # Colour
+      - const: sony,imx290
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz or 74.25 MHz)
+    items:
+      - const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz
+
+  vdda-supply:
+    description: Analog power supply (2.9V)
+
+  vddd-supply:
+    description: Digital core power supply (1.2V)
+
+  vdddo-supply:
+    description: Digital I/O power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - vdda-supply
+  - vddd-supply
+  - vdddo-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx290: camera-sensor@1a {
+            compatible = "sony,imx290lqr";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "xclk";
+            clock-frequency = <37125000>;
+
+            vdddo-supply = <&camera_vdddo_1v8>;
+            vdda-supply = <&camera_vdda_2v8>;
+            vddd-supply = <&camera_vddd_1v5>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx290_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <445500000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
new file mode 100644
index 0000000000..65ad9c100e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+  sensor with square pixel array and 1.58 M effective pixels. This chip
+  features a global shutter with variable charge-integration time. It is
+  programmable through I2C and 4-wire interfaces. The sensor output is
+  available via CSI-2 serial data output (1 Lane).
+
+properties:
+  compatible:
+    enum:
+      - sony,imx296
+      - sony,imx296ll
+      - sony,imx296lq
+    description:
+      The IMX296 sensor exists in two different models, a colour variant
+      (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the
+      model through registers, allowing for auto-detection with a common
+      "sony,imx296" compatible string. However, some camera modules disable the
+      ability to read the sensor model register, which disables this feature.
+      In those cases, the exact model needs to be specified as "sony,imx296ll"
+      or "sony,imx296lq".
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
+    items:
+      - const: inck
+
+  avdd-supply:
+    description: Analog power supply (3.3V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - avdd-supply
+  - dvdd-supply
+  - ovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx296: camera-sensor@1a {
+            compatible = "sony,imx296";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "inck";
+
+            avdd-supply = <&camera_vdda_3v3>;
+            dvdd-supply = <&camera_vddd_1v2>;
+            ovdd-supply = <&camera_vddo_1v8>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx296_ep: endpoint {
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
new file mode 100644
index 0000000000..bce57b22f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx334.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX334 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX334 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 3864H x 2202V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx334
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx334";
+            reg = <0x1a>;
+            clocks = <&imx334_clk>;
+
+            assigned-clocks = <&imx334_clk>;
+            assigned-clock-parents = <&imx334_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx334: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <891000000 445500000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
new file mode 100644
index 0000000000..a167dcdb3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX335 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX335 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 2592H x 1944V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx335
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx335";
+            reg = <0x1a>;
+            clocks = <&imx335_clk>;
+
+            assigned-clocks = <&imx335_clk>;
+            assigned-clock-parents = <&imx335_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx335: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <594000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
new file mode 100644
index 0000000000..d9b7815650
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx412.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX412 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX412 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 4072H x 3176V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    enum:
+      - sony,imx412
+      - sony,imx577
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
+    maxItems: 1
+
+  dovdd-supply:
+    description: Interface power supply.
+
+  avdd-supply:
+    description: Analog power supply.
+
+  dvdd-supply:
+    description: Digital power supply.
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx412";
+            reg = <0x1a>;
+            clocks = <&imx412_clk>;
+
+            assigned-clocks = <&imx412_clk>;
+            assigned-clock-parents = <&imx412_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx412: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <600000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
new file mode 100644
index 0000000000..642f9b15d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX415 CMOS Image Sensor
+
+maintainers:
+  - Michael Riesch <michael.riesch@wolfvision.net>
+
+description: |-
+  The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
+  solid-state image sensor with a square pixel array and 8.46 M effective
+  pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
+  1.8 V triple power supply, and has low power consumption.
+  The IMX415 is programmable through I2C interface. The sensor output is
+  available via CSI-2 serial data output (two or four lanes).
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx415
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz)
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply (2.9 V)
+
+  dvdd-supply:
+    description: Digital power supply (1.1 V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8 V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  flash-leds: true
+
+  lens-focus: true
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dvdd-supply
+  - ovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx415: camera-sensor@1a {
+            compatible = "sony,imx415";
+            reg = <0x1a>;
+            avdd-supply = <&vcc2v9_cam>;
+            clocks = <&clock_cam>;
+            dvdd-supply = <&vcc1v1_cam>;
+            lens-focus = <&vcm>;
+            orientation = <2>;
+            ovdd-supply = <&vcc1v8_cam>;
+            reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
+            rotation = <180>;
+
+            port {
+                imx415_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <445500000>;
+                    remote-endpoint = <&mipi_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
new file mode 100644
index 0000000000..b68141264c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description:
+  MIPID02 has two CSI-2 input ports, only one of those ports can be
+  active at a time. Active port input stream will be de-serialized
+  and its content outputted through PARALLEL output port.
+  CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2
+  second input port is a single lane 800Mbps. Both ports support clock
+  and data lane polarity swap. First port also supports data lane swap.
+  PARALLEL output port has a maximum width of 12 bits.
+  Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888,
+  RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
+
+properties:
+  compatible:
+    const: st,st-mipid02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xclk
+
+  VDDE-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VDDIN-supply:
+    description:
+      Sensor internal regulator supply. Must be 1.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the xsdn pin, if any.
+      This is an active low signal to the mipid02.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 first input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                  Dual-lane operation shall be <1 2> or <2 1> .
+                minItems: 1
+                maxItems: 2
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 second input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                maxItems: 1
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                enum: [6, 7, 8, 10, 12]
+
+            required:
+              - bus-width
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+    required:
+      - port@2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VDDE-supply
+  - VDDIN-supply
+  - ports
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        mipid02: csi2rx@14 {
+            compatible = "st,st-mipid02";
+            reg = <0x14>;
+            clocks = <&clk_ext_camera_12>;
+            clock-names = "xclk";
+            VDDE-supply = <&vdd>;
+            VDDIN-supply = <&vdd>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    ep0: endpoint {
+                        data-lanes = <1 2>;
+                        remote-endpoint = <&mipi_csi2_in>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+
+                    ep2: endpoint {
+                        bus-width = <8>;
+                        hsync-active = <0>;
+                        vsync-active = <0>;
+                        remote-endpoint = <&parallel_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
new file mode 100644
index 0000000000..8c28848b22
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2022 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
+  quad lanes 800Mbps per lane.
+  Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
+  Following part number are supported
+  - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
+  Maximum frame rate is 75 fps.
+  - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
+  Maximum frame rate is 60 fps.
+
+properties:
+  compatible:
+    const: st,st-vgxy61
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VCORE-supply:
+    description:
+      Sensor digital core supply. Must be 1.2 volts.
+
+  VDDIO-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VANA-supply:
+    description:
+      Sensor analog supply. Must be 2.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the reset pin, if any.
+      This is an active low signal to the vgxy61.
+
+  st,strobe-gpios-polarity:
+    description:
+      Invert polarity of illuminator's lights strobe GPIOs.
+      These GPIOs directly drive the illuminator LEDs.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description:
+              CSI lanes to use
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - clocks
+  - VCORE-supply
+  - VDDIO-supply
+  - VANA-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vgxy61: csi2tx@10 {
+            compatible = "st,st-vgxy61";
+            reg = <0x10>;
+            clocks = <&clk_ext_camera>;
+            VCORE-supply = <&v1v2>;
+            VDDIO-supply = <&v1v8>;
+            VANA-supply = <&v2v8>;
+            reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
+            port {
+                ep0: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&mipi_csi2_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
new file mode 100644
index 0000000000..59102edcf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt
@@ -0,0 +1,48 @@
+* Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge
+
+The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts
+a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C.
+
+Required Properties:
+
+- compatible: value should be "toshiba,tc358743"
+- clocks, clock-names: should contain a phandle link to the reference clock
+		       source, the clock input is named "refclk".
+
+Optional Properties:
+
+- reset-gpios: gpio phandle GPIO connected to the reset pin
+- interrupts: GPIO connected to the interrupt pin
+- data-lanes: should be <1 2 3 4> for four-lane operation,
+	      or <1 2> for two-lane operation
+- clock-lanes: should be <0>
+- clock-noncontinuous: Presence of this boolean property decides whether the
+		       MIPI CSI-2 clock is continuous or non-continuous.
+- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
+		    expressed as a 64-bit big-endian integer. The frequency
+		    is half of the bps per lane due to DDR transmission.
+
+For further information on the MIPI CSI-2 endpoint node properties, see
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	tc358743@f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		port {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/tda1997x.txt b/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
new file mode 100644
index 0000000000..e76167999d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
@@ -0,0 +1,178 @@
+Device-Tree bindings for the NXP TDA1997x HDMI receiver
+
+The TDA19971/73 are HDMI video receivers.
+
+The TDA19971 Video port output pins can be used as follows:
+ - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
+ - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
+ - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
+ - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
+ - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
+ - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
+ - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
+ - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
+
+The TDA19973 Video port output pins can be used as follows:
+ - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
+ - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0]
+ - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0]
+ - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
+
+The Video port output pins are mapped via 4-bit 'pin groups' allowing
+for a variety of connection possibilities including swapping pin order within
+pin groups. The video_portcfg device-tree property consists of register mapping
+pairs which map a chip-specific VP output register to a 4-bit pin group. If
+the pin group needs to be bit-swapped you can use the *_S pin-group defines.
+
+Required Properties:
+ - compatible          :
+  - "nxp,tda19971" for the TDA19971
+  - "nxp,tda19973" for the TDA19973
+ - reg                 : I2C slave address
+ - interrupts          : The interrupt number
+ - DOVDD-supply        : Digital I/O supply
+ - DVDD-supply         : Digital Core supply
+ - AVDD-supply         : Analog supply
+ - nxp,vidout-portcfg  : array of pairs mapping VP output pins to pin groups.
+
+Optional Properties:
+ - nxp,audout-format   : DAI bus format: "i2s" or "spdif".
+ - nxp,audout-width    : width of audio output data bus (1-4).
+ - nxp,audout-layout   : data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used).
+ - nxp,audout-mclk-fs  : Multiplication factor between stream rate and codec
+                         mclk.
+
+The port node shall contain one endpoint child node for its digital
+output video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Optional Endpoint Properties:
+  The following three properties are defined in video-interfaces.txt and
+  are valid for the output parallel bus endpoint:
+  - hsync-active: Horizontal synchronization polarity. Defaults to active high.
+  - vsync-active: Vertical synchronization polarity. Defaults to active high.
+  - data-active: Data polarity. Defaults to active high.
+
+Examples:
+ - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422
+   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
+	hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		/* audio */
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same pixclk cycle.
+		 */
+		nxp,vidout-portcfg =
+			/* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+ - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
+   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
+	hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		/* audio */
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same pixclk cycle.
+		 */
+		nxp,vidout-portcfg =
+			/* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+ - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
+   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
+	hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		/* audio */
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp BT656 mode outputs YCbCr[11:4] across 8bits over
+		 * 2 pixclk cycles.
+		 */
+		nxp,vidout-portcfg =
+			/* YCbCr[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+			< TDA1997X_VP24_V15_12 TDA1997X_R_CR_CBCR_11_8 >,
+			/* YCbCr[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+			< TDA1997X_VP24_V11_08 TDA1997X_R_CR_CBCR_7_4 >,
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ths8200.txt b/Documentation/devicetree/bindings/media/i2c/ths8200.txt
new file mode 100644
index 0000000000..285f6ae7df
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ths8200.txt
@@ -0,0 +1,19 @@
+* Texas Instruments THS8200 video encoder
+
+The ths8200 device is a digital to analog converter used in DVD players, video
+recorders, set-top boxes.
+
+Required Properties :
+- compatible : value must be "ti,ths8200"
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		ths8200@5c {
+			compatible = "ti,ths8200";
+			reg = <0x5c>;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
new file mode 100644
index 0000000000..f6612bb0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub913.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB913 FPD-Link III Serializer
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  The TI DS90UB913 is an FPD-Link III video serializer for parallel video.
+
+properties:
+  compatible:
+    enum:
+      - ti,ds90ub913a-q1
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPO pin number, second cell is the flags. The GPO pin
+      number must be in range of [0, 3]. Note that GPOs 2 and 3 are not
+      available in external oscillator mode.
+
+  gpio-controller: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference clock connected to the CLKIN pin.
+
+  clock-names:
+    items:
+      - const: clkin
+
+  '#clock-cells':
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Parallel input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            required:
+              - pclk-sample
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: FPD-Link III output port
+
+    required:
+      - port@0
+      - port@1
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+  - '#clock-cells'
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serializer {
+      compatible = "ti,ds90ub913a-q1";
+
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      clocks = <&clk_cam_48M>;
+      clock-names = "clkin";
+
+      #clock-cells = <0>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          ub913_in: endpoint {
+            remote-endpoint = <&sensor_out>;
+            pclk-sample = <1>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          endpoint {
+            remote-endpoint = <&deser_fpd_in>;
+          };
+        };
+      };
+
+      i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+          compatible = "aptina,mt9v111";
+          reg = <0x48>;
+
+          clocks = <&fixed_clock>;
+
+          port {
+            sensor_out: endpoint {
+              remote-endpoint = <&ub913_in>;
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
new file mode 100644
index 0000000000..2030366994
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB953 FPD-Link III Serializer
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  The TI DS90UB953 is an FPD-Link III video serializer for MIPI CSI-2.
+
+properties:
+  compatible:
+    enum:
+      - ti,ds90ub953-q1
+      - ti,ds90ub971-q1
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+      number must be in range of [0, 3].
+
+  gpio-controller: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference clock connected to the CLKIN pin.
+
+  clock-names:
+    items:
+      - const: clkin
+
+  '#clock-cells':
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: FPD-Link III output port
+
+    required:
+      - port@0
+      - port@1
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+  - '#clock-cells'
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serializer {
+      compatible = "ti,ds90ub953-q1";
+
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      #clock-cells = <0>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          ub953_in: endpoint {
+            clock-lanes = <0>;
+            data-lanes = <1 2 3 4>;
+            remote-endpoint = <&sensor_out>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          endpoint {
+            remote-endpoint = <&deser_fpd_in>;
+          };
+        };
+      };
+
+      i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@1a {
+          compatible = "sony,imx274";
+          reg = <0x1a>;
+
+          reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+
+          clocks = <&serializer>;
+          clock-names = "inck";
+
+          port {
+            sensor_out: endpoint {
+              remote-endpoint = <&ub953_in>;
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
new file mode 100644
index 0000000000..289737721c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -0,0 +1,427 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
+  forwarding.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-atr.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,ds90ub960-q1
+      - ti,ds90ub9702-q1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference clock connected to the REFCLK pin.
+
+  clock-names:
+    items:
+      - const: refclk
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the PDB pin.
+
+  i2c-alias-pool:
+    minItems: 1
+    maxItems: 32
+
+  links:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      ti,manual-strobe:
+        type: boolean
+        description:
+          Enable manual strobe position and EQ level
+
+    patternProperties:
+      '^link@[0-3]$':
+        type: object
+        additionalProperties: false
+        properties:
+          reg:
+            description: The link number
+            maxItems: 1
+
+          i2c-alias:
+            description:
+              The I2C address used for the serializer. Transactions to this
+              address on the I2C bus where the deserializer resides are
+              forwarded to the serializer.
+
+          ti,rx-mode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum:
+              - 0 # RAW10
+              - 1 # RAW12 HF
+              - 2 # RAW12 LF
+              - 3 # CSI2 SYNC
+              - 4 # CSI2 NON-SYNC
+            description:
+              FPD-Link Input Mode. This should reflect the hardware and the
+              default mode of the connected device.
+
+          ti,cdr-mode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum:
+              - 0 # FPD-Link III
+              - 1 # FPD-Link IV
+            description:
+              FPD-Link CDR Mode. This should reflect the hardware and the
+              default mode of the connected device.
+
+          ti,strobe-pos:
+            $ref: /schemas/types.yaml#/definitions/int32
+            minimum: -13
+            maximum: 13
+            description: Manual strobe position
+
+          ti,eq-level:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 14
+            description: Manual EQ level
+
+          serializer:
+            type: object
+            description: FPD-Link Serializer node
+
+        required:
+          - reg
+          - i2c-alias
+          - ti,rx-mode
+          - serializer
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 0
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 1
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 2
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 3
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output 0
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output 1
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      deser@3d {
+        compatible = "ti,ds90ub960-q1";
+        reg = <0x3d>;
+
+        clock-names = "refclk";
+        clocks = <&fixed_clock>;
+
+        powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
+
+        i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Port 0, Camera 0 */
+          port@0 {
+            reg = <0>;
+
+            ub960_fpd3_1_in: endpoint {
+              remote-endpoint = <&ub953_1_out>;
+            };
+          };
+
+          /* Port 1, Camera 1 */
+          port@1 {
+            reg = <1>;
+
+            ub960_fpd3_2_in: endpoint {
+              remote-endpoint = <&ub913_2_out>;
+              hsync-active = <0>;
+              vsync-active = <1>;
+            };
+          };
+
+          /* Port 2, unconnected */
+          port@2 {
+            reg = <2>;
+          };
+
+          /* Port 3, unconnected */
+          port@3 {
+            reg = <3>;
+          };
+
+          /* Port 4, CSI-2 TX */
+          port@4 {
+            reg = <4>;
+            ds90ub960_0_csi_out: endpoint {
+              data-lanes = <1 2 3 4>;
+              link-frequencies = /bits/ 64 <800000000>;
+              remote-endpoint = <&csi2_phy0>;
+            };
+          };
+
+          /* Port 5, unconnected */
+          port@5 {
+            reg = <5>;
+          };
+        };
+
+        links {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Link 0 has DS90UB953 serializer and IMX274 sensor */
+
+          link@0 {
+            reg = <0>;
+            i2c-alias = <0x44>;
+
+            ti,rx-mode = <3>;
+
+            serializer1: serializer {
+              compatible = "ti,ds90ub953-q1";
+
+              gpio-controller;
+              #gpio-cells = <2>;
+
+              #clock-cells = <0>;
+
+              ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                  reg = <0>;
+                  ub953_1_in: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&sensor_1_out>;
+                  };
+                };
+
+                port@1 {
+                  reg = <1>;
+
+                  ub953_1_out: endpoint {
+                    remote-endpoint = <&ub960_fpd3_1_in>;
+                  };
+                };
+              };
+
+              i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@1a {
+                  compatible = "sony,imx274";
+                  reg = <0x1a>;
+
+                  reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
+
+                  port {
+                    sensor_1_out: endpoint {
+                      remote-endpoint = <&ub953_1_in>;
+                    };
+                  };
+                };
+              };
+            };
+          };  /* End of link@0 */
+
+          /* Link 1 has DS90UB913 serializer and MT9V111 sensor */
+
+          link@1 {
+            reg = <1>;
+            i2c-alias = <0x45>;
+
+            ti,rx-mode = <0>;
+
+            serializer2: serializer {
+              compatible = "ti,ds90ub913a-q1";
+
+              gpio-controller;
+              #gpio-cells = <2>;
+
+              clocks = <&clk_cam_48M>;
+              clock-names = "clkin";
+
+              #clock-cells = <0>;
+
+              ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                  reg = <0>;
+                  ub913_2_in: endpoint {
+                    remote-endpoint = <&sensor_2_out>;
+                    pclk-sample = <1>;
+                  };
+                };
+
+                port@1 {
+                  reg = <1>;
+
+                  ub913_2_out: endpoint {
+                    remote-endpoint = <&ub960_fpd3_2_in>;
+                  };
+                };
+              };
+
+              i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@48 {
+                  compatible = "aptina,mt9v111";
+                  reg = <0x48>;
+
+                  clocks = <&serializer2>;
+
+                  port {
+                    sensor_2_out: endpoint {
+                      remote-endpoint = <&ub913_2_in>;
+                    };
+                  };
+                };
+              };
+            };
+          }; /* End of link@1 */
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
new file mode 100644
index 0000000000..e80d5891b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
@@ -0,0 +1,55 @@
+Toshiba et8ek8 5MP sensor
+
+Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "toshiba,et8ek8"
+- reg: I2C address (0x3e, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), 2.8 volts
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor. Camera
+  driver will set this frequency on the external clock. The clock frequency is
+  a pre-determined frequency known to be suitable to the board.
+- reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor
+  is in hardware standby mode when the signal is in the low state.
+
+
+Optional properties
+-------------------
+
+- flash-leds: See ../video-interfaces.txt
+- lens-focus: See ../video-interfaces.txt
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	cam1: camera@3e {
+		compatible = "toshiba,et8ek8";
+		reg = <0x3e>;
+		vana-supply = <&vaux4>;
+		clocks = <&isp 0>;
+		clock-frequency = <9600000>;
+		reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+		port {
+			csi_cam1: endpoint {
+				remote-endpoint = <&csi_out1>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
new file mode 100644
index 0000000000..1c476b635b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |-
+  The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2
+  stream. The direction can be either parallel-in -> csi-out or csi-in ->
+  parallel-out The chip is programmable through I2C and SPI but the SPI
+  interface is only supported in parallel-in -> csi-out mode.
+
+  Note that the current device tree bindings only support the
+  parallel-in -> csi-out path.
+
+properties:
+  compatible:
+    const: toshiba,tc358746
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      The phandle to the reference clock source. This corresponds to the
+      hardware pin REFCLK.
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  "#clock-cells":
+    description: |
+      The bridge can act as clock provider for the sensor. To enable this
+      support #clock-cells must be specified. Attention if this feature is used
+      then the mclk rate must be at least: (2 * link-frequency) / 8
+                                           `------------------´   ^
+                                           internal PLL rate   smallest possible
+                                                                   mclk-div
+    const: 0
+
+  clock-output-names:
+    description:
+      The clock name of the MCLK output, the default name is tc358746-mclk.
+    maxItems: 1
+
+  vddc-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vddio-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  vddmipi-supply:
+    description: MIPI CSI phy voltage supply, 1.2 volts
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls the chip reset.
+      This corresponds to the hardware pin RESX which is physically active low.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-type:
+                enum: [ 5, 6 ]
+
+            required:
+              - hsync-active
+              - vsync-active
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              clock-noncontinuous: true
+              link-frequencies: true
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vddc-supply
+  - vddio-supply
+  - vddmipi-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      csi-bridge@e {
+        compatible = "toshiba,tc358746";
+        reg = <0xe>;
+
+        clocks = <&refclk>;
+        clock-names = "refclk";
+
+        reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+
+        vddc-supply = <&v1_2d>;
+        vddio-supply = <&v1_8d>;
+        vddmipi-supply = <&v1_2d>;
+
+        /* sensor mclk provider */
+        #clock-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Input */
+          port@0 {
+            reg = <0>;
+            tc358746_in: endpoint {
+              remote-endpoint = <&sensor_out>;
+              hsync-active = <0>;
+              vsync-active = <0>;
+              bus-type = <5>;
+            };
+          };
+
+          /* Output */
+          port@1 {
+            reg = <1>;
+            tc358746_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+              clock-noncontinuous;
+              link-frequencies = /bits/ 64 <216000000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
new file mode 100644
index 0000000000..46752cc71f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,44 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible : value should be either one among the following
+	(a) "ti,tvp5146" for tvp5146 decoder.
+	(b) "ti,tvp5146m2" for tvp5146m2 decoder.
+	(c) "ti,tvp5147" for tvp5147 decoder.
+	(d) "ti,tvp5147m1" for tvp5147m1 decoder.
+
+- hsync-active: HSYNC Polarity configuration for endpoint.
+
+- vsync-active: VSYNC Polarity configuration for endpoint.
+
+- pclk-sample: Clock polarity of the endpoint.
+
+For further reading on port node refer to Documentation/devicetree/bindings/
+media/video-interfaces.txt.
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		tvp514x@5c {
+			compatible = "ti,tvp5146";
+			reg = <0x5c>;
+
+			port {
+				tvp514x_1: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					pclk-sample = <0>;
+				};
+			};
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
new file mode 100644
index 0000000000..94b908ace5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
@@ -0,0 +1,157 @@
+* Texas Instruments TVP5150 and TVP5151 video decoders
+
+The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
+(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
+with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
+
+Required Properties:
+====================
+- compatible:	Value must be "ti,tvp5150".
+- reg:		I2C slave address.
+
+Optional Properties:
+====================
+- pdn-gpios:	Phandle for the GPIO connected to the PDN pin, if any.
+- reset-gpios:	Phandle for the GPIO connected to the RESETB pin, if any.
+
+The device node must contain one 'port' child node per device physical input
+and output port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
+are numbered as follows
+
+	  Name		Type		Port
+	--------------------------------------
+	  AIP1A		sink		0
+	  AIP1B		sink		1
+	  Y-OUT		src		2
+
+The device node must contain at least one sink port and the src port. Each input
+port must be linked to an endpoint defined in [1]. The port/connector layout is
+as follows
+
+tvp-5150 port@0 (AIP1A)
+	endpoint@0 -----------> Comp0-Con  port
+	endpoint@1 ------+----> Svideo-Con port
+tvp-5150 port@1 (AIP1B)  |
+	endpoint@1 ------+
+	endpoint@0 -----------> Comp1-Con  port
+tvp-5150 port@2
+	endpoint (video bitstream output at YOUT[0-7] parallel bus)
+
+Required Endpoint Properties for parallel synchronization on output port:
+=========================================================================
+
+- hsync-active:		Active state of the HSYNC signal. Must be <1> (HIGH).
+- vsync-active:		Active state of the VSYNC signal. Must be <1> (HIGH).
+- field-even-active:	Field signal level during the even field data
+			transmission. Must be <0>.
+
+Note: Do not specify any of these properties if you want to use the embedded
+      BT.656 synchronization.
+
+Optional Connector Properties:
+==============================
+
+- sdtv-standards: Set the possible signals to which the hardware tries to lock
+                  instead of using the autodetection mechanism. Please look at
+                  [1] for more information.
+
+[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml.
+
+Example - three input sources:
+#include <dt-bindings/display/sdtv-standards.h>
+
+comp_connector_0 {
+	compatible = "composite-video-connector";
+	label = "Composite0";
+	sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */
+
+	port {
+		composite0_to_tvp5150: endpoint {
+			remote-endpoint = <&tvp5150_to_composite0>;
+		};
+	};
+};
+
+comp_connector_1 {
+	compatible = "composite-video-connector";
+	label = "Composite1";
+	sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */
+
+	port {
+		composite1_to_tvp5150: endpoint {
+			remote-endpoint = <&tvp5150_to_composite1>;
+		};
+	};
+};
+
+svideo_connector {
+	compatible = "svideo-connector";
+	label = "S-Video";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		svideo_luma_to_tvp5150: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&tvp5150_to_svideo_luma>;
+		};
+
+		svideo_chroma_to_tvp5150: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&tvp5150_to_svideo_chroma>;
+		};
+	};
+};
+
+&i2c2 {
+	tvp5150@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+		pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tvp5150_to_composite0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&composite0_to_tvp5150>;
+			};
+
+			tvp5150_to_svideo_luma: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&svideo_luma_to_tvp5150>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tvp5150_to_composite1: endpoint@0 {
+				reg = <0>;
+                                remote-endpoint = <&composite1_to_tvp5150>;
+			};
+
+			tvp5150_to_svideo_chroma: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&svideo_chroma_to_tvp5150>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			tvp5150_1: endpoint {
+				remote-endpoint = <&ccdc_ep>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
new file mode 100644
index 0000000000..5f28b5d9ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
@@ -0,0 +1,53 @@
+* Texas Instruments TV7002 video decoder
+
+The TVP7002 device supports digitizing of video and graphics signal in RGB and
+YPbPr color space.
+
+Required Properties :
+- compatible : Must be "ti,tvp7002"
+
+Optional Properties:
+- hsync-active: HSYNC Polarity configuration for the bus. Default value when
+  this property is not specified is <0>.
+
+- vsync-active: VSYNC Polarity configuration for the bus. Default value when
+  this property is not specified is <0>.
+
+- pclk-sample: Clock polarity of the bus. Default value when this property is
+  not specified is <0>.
+
+- sync-on-green-active: Active state of Sync-on-green signal property of the
+  endpoint.
+  0 = Normal Operation (Active Low, Default)
+  1 = Inverted operation
+
+- field-even-active: Active-high Field ID output polarity control of the bus.
+  Under normal operation, the field ID output is set to logic 1 for an odd field
+  (field 1) and set to logic 0 for an even field (field 0).
+  0 = Normal Operation (Active Low, Default)
+  1 = FID output polarity inverted
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+	i2c0@1c22000 {
+		...
+		...
+		tvp7002@5c {
+			compatible = "ti,tvp7002";
+			reg = <0x5c>;
+
+			port {
+				tvp7002_1: endpoint {
+					hsync-active = <1>;
+					vsync-active = <1>;
+					pclk-sample = <0>;
+					sync-on-green-active = <1>;
+					field-even-active = <0>;
+				};
+			};
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt b/Documentation/devicetree/bindings/media/img-ir-rev1.txt
new file mode 100644
index 0000000000..ed9ec52b77
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt
@@ -0,0 +1,34 @@
+* ImgTec Infrared (IR) decoder version 1
+
+This binding is for Imagination Technologies' Infrared decoder block,
+specifically major revision 1.
+
+Required properties:
+- compatible:		Should be "img,ir-rev1"
+- reg:			Physical base address of the controller and length of
+			memory mapped region.
+- interrupts:		The interrupt specifier to the cpu.
+
+Optional properties:
+- clocks:		List of clock specifiers as described in standard
+			clock bindings.
+			Up to 3 clocks may be specified in the following order:
+			1st:	Core clock (defaults to 32.768KHz if omitted).
+			2nd:	System side (fast) clock.
+			3rd:	Power modulation clock.
+- clock-names:		List of clock names corresponding to the clocks
+			specified in the clocks property.
+			Accepted clock names are:
+			"core":	Core clock.
+			"sys":	System clock.
+			"mod":	Power modulation clock.
+
+Example:
+
+	ir@2006200 {
+		compatible = "img,ir-rev1";
+		reg = <0x02006200 0x100>;
+		interrupts = <29 4>;
+		clocks = <&clk_32khz>;
+		clock-names =  "core";
+	};
diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
new file mode 100644
index 0000000000..77f4b0a7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx.txt
@@ -0,0 +1,53 @@
+Freescale i.MX Media Video Device
+=================================
+
+Video Media Controller node
+---------------------------
+
+This is the media controller node for video capture support. It is a
+virtual device that lists the camera serial interface nodes that the
+media device will control.
+
+Required properties:
+- compatible : "fsl,imx-capture-subsystem";
+- ports      : Should contain a list of phandles pointing to camera
+		sensor interface ports of IPU devices
+
+example:
+
+capture-subsystem {
+	compatible = "fsl,imx-capture-subsystem";
+	ports = <&ipu1_csi0>, <&ipu1_csi1>;
+};
+
+
+mipi_csi2 node
+--------------
+
+This is the device node for the MIPI CSI-2 Receiver core in the i.MX
+SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
+combined with a D-PHY core mixed into the same register block. In
+addition this device consists of an i.MX-specific "CSI2IPU gasket"
+glue logic, also controlled from the same register block. The CSI2IPU
+gasket demultiplexes the four virtual channel streams from the host
+controller's 32-bit output image bus onto four 16-bit parallel busses
+to the i.MX IPU CSIs.
+
+Required properties:
+- compatible	: "fsl,imx6-mipi-csi2";
+- reg           : physical base address and length of the register set;
+- clocks	: the MIPI CSI-2 receiver requires three clocks: hsi_tx
+		  (the D-PHY clock), video_27m (D-PHY PLL reference
+		  clock), and eim_podf;
+- clock-names	: must contain "dphy", "ref", "pix";
+- port@*        : five port nodes must exist, containing endpoints
+		  connecting to the source and sink devices according to
+		  of_graph bindings. The first port is an input port,
+		  connecting with a MIPI CSI-2 source, and ports 1
+		  through 4 are output ports connecting with parallel
+		  bus sink endpoint nodes and correspond to the four
+		  MIPI CSI-2 virtual channel outputs.
+
+Optional properties:
+- interrupts	: must contain two level-triggered interrupts,
+		  in order: 100 and 101;
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
new file mode 100644
index 0000000000..de3e483f14
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP2 camera host interface
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: '^camera@[a-f0-9]+$'
+
+  compatible:
+    const: marvell,mmp2-ccic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active: true
+          vsync-active: true
+          pclk-sample: true
+          bus-type: true
+
+  clocks:
+    minItems: 1
+    items:
+      - description: AXI bus interface clock
+      - description: Peripheral clock
+      - description: Parallel video bus interface clock
+
+  clock-names:
+    const: axi
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: mclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/media/video-interfaces.h>
+    #include <dt-bindings/power/marvell,mmp2.h>
+
+    camera@d420a000 {
+      compatible = "marvell,mmp2-ccic";
+      reg = <0xd420a000 0x800>;
+      interrupts = <42>;
+      clocks = <&soc_clocks MMP2_CLK_CCIC0>;
+      clock-names = "axi";
+      #clock-cells = <0>;
+      clock-output-names = "mclk";
+      power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>;
+
+      port {
+        camera0_0: endpoint {
+          remote-endpoint = <&ov7670_0>;
+          bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+          hsync-active = <1>;  /* Active high */
+          vsync-active = <1>;  /* Active high */
+          pclk-sample = <0>;   /* Falling */
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
new file mode 100644
index 0000000000..3e128733ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Read Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Read Direct Memory Access(RDMA) component used to do read DMA.
+  It contains one line buffer to store the sufficient pixel data, and
+  must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt8183-mdp3-rdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA clock
+      - description: RSZ clock
+
+  iommus:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: used for 1st data pipe from RDMA
+      - description: used for 2nd data pipe from RDMA
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+  - mboxes
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
new file mode 100644
index 0000000000..78f9de6192
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Resizer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to do frame resizing.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-rsz
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_rsz0: mdp3-rsz0@14003000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14003000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ0_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+    };
+
+    mdp3_rsz1: mdp3-rsz1@14004000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14004000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ1_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
new file mode 100644
index 0000000000..64ea98aa05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write DMA with Rotation
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wrot
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
new file mode 100644
index 0000000000..e5448c60e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Decoder is the JPEG decode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 6
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgdec@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg decoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgdec-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgdec
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgdec-master {
+            compatible = "mediatek,mt8195-jpgdec";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgdec@1a040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+            };
+
+            jpgdec@1a050000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            };
+
+            jpgdec@1b040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
new file mode 100644
index 0000000000..596186497b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgenc@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg encoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgenc-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgenc
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgenc-master {
+            compatible = "mediatek,mt8195-jpgenc";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgenc@1a030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1a030000 0 0x10000>;
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+            };
+
+            jpgenc@1b030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1b030000 0 0x10000>;
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
new file mode 100644
index 0000000000..b401c67e3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-dec
+      - mediatek,mt8183-vcodec-dec
+
+  reg:
+    minItems: 11
+    maxItems: 11
+
+  reg-names:
+    items:
+      - const: misc
+      - const: ld
+      - const: top
+      - const: cm
+      - const: ad
+      - const: av
+      - const: pp
+      - const: hwd
+      - const: hwq
+      - const: hwb
+      - const: hwg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  mediatek,vdecsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the vdecsys syscon node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - mediatek,vdecsys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-dec
+
+    then:
+      required:
+        - mediatek,scp
+
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+
+        clock-names:
+          items:
+            - const: vdec
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-dec
+
+    then:
+      required:
+        - mediatek,vpu
+
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+
+        clock-names:
+          items:
+            - const: vcodecpll
+            - const: univpll_d2
+            - const: clk_cci400_sel
+            - const: vdec_sel
+            - const: vdecpll
+            - const: vencpll
+            - const: venc_lt_sel
+            - const: vdec_bus_clk_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    vcodec_dec: vcodec@16020000 {
+      compatible = "mediatek,mt8173-vcodec-dec";
+      reg = <0x16020000 0x1000>,  /*VDEC_MISC*/
+          <0x16021000 0x800>,   /*VDEC_LD*/
+          <0x16021800 0x800>,   /*VDEC_TOP*/
+          <0x16022000 0x1000>,  /*VDEC_CM*/
+          <0x16023000 0x1000>,  /*VDEC_AD*/
+          <0x16024000 0x1000>,  /*VDEC_AV*/
+          <0x16025000 0x1000>,  /*VDEC_PP*/
+          <0x16026800 0x800>,   /*VP8_VD*/
+          <0x16027000 0x800>,   /*VP6_VD*/
+          <0x16027800 0x800>,   /*VP8_VL*/
+          <0x16028400 0x400>;   /*VP9_VD*/
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+      mediatek,vpu = <&vpu>;
+      mediatek,vdecsys = <&vdecsys>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+      clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+                      <&topckgen CLK_TOP_CCI400_SEL>,
+                      <&topckgen CLK_TOP_VDEC_SEL>,
+                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
+                      <&apmixedsys CLK_APMIXED_VENCPLL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+                             <&topckgen CLK_TOP_UNIVPLL_D2>,
+                             <&topckgen CLK_TOP_VCODECPLL>;
+      assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
new file mode 100644
index 0000000000..a2051b31fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Encode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Encode is the video encode hardware present in Mediatek
+  SoCs which supports high resolution encoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-enc-vp8
+      - mediatek,mt8173-vcodec-enc
+      - mediatek,mt8183-vcodec-enc
+      - mediatek,mt8188-vcodec-enc
+      - mediatek,mt8192-vcodec-enc
+      - mediatek,mt8195-vcodec-enc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+
+    then:
+      required:
+        - mediatek,vpu
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8173-vcodec-enc
+            - mediatek,mt8188-vcodec-enc
+            - mediatek,mt8192-vcodec-enc
+            - mediatek,mt8195-vcodec-enc
+
+    then:
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_sel
+    else:  # for vp8 hw encoder
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_lt_sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    vcodec_enc_avc: vcodec@18002000 {
+      compatible = "mediatek,mt8173-vcodec-enc";
+      reg = <0x18002000 0x1000>;
+      interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_PORT_VENC_REC>,
+             <&iommu M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_PORT_VENC_NBM_WDMA>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      clock-names = "venc_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+    };
+
+    vcodec_enc_vp8: vcodec@19002000 {
+      compatible = "mediatek,mt8173-vcodec-enc-vp8";
+      reg =  <0x19002000 0x1000>;	/* VENC_LT_SYS */
+      interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      clock-names = "venc_lt_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
new file mode 100644
index 0000000000..a500a585c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator With Multi Hardware
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities. Required
+  parent and child device node.
+
+  About the Decoder Hardware Block Diagram, please check below:
+
+    +------------------------------------------------+-------------------------------------+
+    |                                                |                                     |
+    |  input -> lat soc HW -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output  |
+    |            ||             ||                   |                     ||              |
+    +------------||-------------||-------------------+---------------------||--------------+
+                 ||     lat     ||                   |               core workqueue  <parent>
+    -------------||-------------||-------------------|---------------------||---------------
+                 ||<------------||----------------HW index---------------->||        <child>
+                 \/             \/                                         \/
+               +-------------------------------------------------------------+
+               |                          enable/disable                     |
+               |                 clk     power    irq    iommu               |
+               |                   (lat/lat soc/core0/core1)                 |
+               +-------------------------------------------------------------+
+
+  As above, there are parent and child devices, child mean each hardware. The child device
+  controls the information of each hardware independent which include clk/power/irq.
+
+  There are two workqueues in parent device: lat workqueue and core workqueue. They are used
+  to lat and core hardware decoder. Lat workqueue need to get input bitstream and lat buffer,
+  then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode
+  done. Core workqueue need to get lat buffer and output buffer, then enable core to decode,
+  writing the result to output buffer, disable hardware when core decode done. These two
+  hardwares will decode each frame cyclically.
+
+  For the smi common may not the same for each hardware, can't combine all hardware in one node,
+  or leading to iommu fault when access dram data.
+
+  Lat soc is a hardware which is related with some larb(local arbiter) ports. For mt8195
+  platform, there are some ports like RDMA, UFO in lat soc larb, need to enable its power and
+  clock when lat start to work, don't have interrupt.
+
+  mt8195: lat soc HW + lat HW + core HW
+  mt8192: lat HW + core HW
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-vcodec-dec
+      - mediatek,mt8186-vcodec-dec
+      - mediatek,mt8188-vcodec-dec
+      - mediatek,mt8195-vcodec-dec
+
+  reg:
+    minItems: 1
+    items:
+      - description: VDEC_SYS register space
+      - description: VDEC_RACING_CTRL register space
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The node of system control processor (SCP), using
+      the remoteproc & rpmsg framework.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  '^video-codec@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - mediatek,mtk-vcodec-core
+          - mediatek,mtk-vcodec-lat
+          - mediatek,mtk-vcodec-lat-soc
+
+      reg:
+        maxItems: 1
+        description: VDEC_MISC register space
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        minItems: 4
+        maxItems: 5
+
+      clock-names:
+        minItems: 4
+        maxItems: 5
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iommus
+  - mediatek,scp
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mtk-vcodec-core
+          - mediatek,mtk-vcodec-lat
+
+then:
+  required:
+    - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8192-vcodec-dec
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: sel
+            - const: soc-vdec
+            - const: soc-lat
+            - const: vdec
+            - const: top
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-vcodec-dec
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: sel
+            - const: vdec
+            - const: lat
+            - const: top
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8192-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+
+    bus@16000000 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0 0x16000000 0x16000000 0 0x40000>;
+
+        video-codec@16000000 {
+            compatible = "mediatek,mt8192-vcodec-dec";
+            mediatek,scp = <&scp>;
+            iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0 0 0 0x16000000 0 0x40000>;
+            reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+            video-codec@10000 {
+                compatible = "mediatek,mtk-vcodec-lat";
+                reg = <0 0x10000 0 0x800>;
+                interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+            };
+
+            video-codec@25000 {
+                compatible = "mediatek,mtk-vcodec-core";
+                reg = <0 0x25000 0 0x1000>;
+                interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys CLK_VDEC_VDEC>,
+                    <&vdecsys CLK_VDEC_LAT>,
+                    <&vdecsys CLK_VDEC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
new file mode 100644
index 0000000000..cfabf360f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-jpgdec
+              - mediatek,mt2701-jpgdec
+      - items:
+          - enum:
+              - mediatek,mt7623-jpgdec
+              - mediatek,mt8188-jpgdec
+          - const: mediatek,mt2701-jpgdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: jpgdec-smi
+      - const: jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegdec: jpegdec@15004000 {
+      compatible = "mediatek,mt2701-jpgdec";
+      reg = <0x15004000 0x1000>;
+      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+                <&imgsys CLK_IMG_JPGDEC>;
+      clock-names = "jpgdec-smi",
+                    "jpgdec";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+               <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
new file mode 100644
index 0000000000..37800e1908
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-jpgenc
+          - mediatek,mt8183-jpgenc
+          - mediatek,mt8186-jpgenc
+          - mediatek,mt8188-jpgenc
+      - const: mediatek,mtk-jpgenc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegenc: jpegenc@1500a000 {
+      compatible = "mediatek,mt2701-jpgenc",
+                   "mediatek,mtk-jpgenc";
+      reg = <0x1500a000 0x1000>;
+      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_VENC>;
+      clock-names = "jpgenc";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+               <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
new file mode 100644
index 0000000000..53ef26e2c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -0,0 +1,95 @@
+* Mediatek Media Data Path
+
+Media Data Path is used for scaling and color space conversion.
+
+Required properties (controller node):
+- compatible: "mediatek,mt8173-mdp"
+- mediatek,vpu: the node of video processor unit, see
+  Documentation/devicetree/bindings/media/mediatek-vpu.txt for details.
+
+Required properties (all function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8173-mdp-rdma"  - read DMA
+        "mediatek,mt8173-mdp-rsz"   - resizer
+        "mediatek,mt8173-mdp-wdma"  - write DMA
+        "mediatek,mt8173-mdp-wrot"  - write DMA with rotation
+- reg: Physical base address and length of the function block register space
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+
+Required properties (DMA function blocks, child node):
+- compatible: Should be one of
+        "mediatek,mt8173-mdp-rdma"
+        "mediatek,mt8173-mdp-wdma"
+        "mediatek,mt8173-mdp-wrot"
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+  for details.
+
+Example:
+	mdp_rdma0: rdma@14001000 {
+		compatible = "mediatek,mt8173-mdp-rdma";
+			     "mediatek,mt8173-mdp";
+		reg = <0 0x14001000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+			 <&mmsys CLK_MM_MUTEX_32K>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+		mediatek,vpu = <&vpu>;
+	};
+
+	mdp_rdma1: rdma@14002000 {
+		compatible = "mediatek,mt8173-mdp-rdma";
+		reg = <0 0x14002000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+			 <&mmsys CLK_MM_MUTEX_32K>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+	};
+
+	mdp_rsz0: rsz@14003000 {
+		compatible = "mediatek,mt8173-mdp-rsz";
+		reg = <0 0x14003000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	};
+
+	mdp_rsz1: rsz@14004000 {
+		compatible = "mediatek,mt8173-mdp-rsz";
+		reg = <0 0x14004000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	};
+
+	mdp_rsz2: rsz@14005000 {
+		compatible = "mediatek,mt8173-mdp-rsz";
+		reg = <0 0x14005000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	};
+
+	mdp_wdma0: wdma@14006000 {
+		compatible = "mediatek,mt8173-mdp-wdma";
+		reg = <0 0x14006000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_WDMA>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_WDMA>;
+	};
+
+	mdp_wrot0: wrot@14007000 {
+		compatible = "mediatek,mt8173-mdp-wrot";
+		reg = <0 0x14007000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_WROT0>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_WROT0>;
+	};
+
+	mdp_wrot1: wrot@14008000 {
+		compatible = "mediatek,mt8173-mdp-wrot";
+		reg = <0 0x14008000 0 0x1000>;
+		clocks = <&mmsys CLK_MM_MDP_WROT1>;
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+		iommus = <&iommu M4U_PORT_MDP_WROT1>;
+	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vpu.txt b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
new file mode 100644
index 0000000000..2a5bac37f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
@@ -0,0 +1,31 @@
+* Mediatek Video Processor Unit
+
+Video Processor Unit is a HW video controller. It controls HW Codec including
+H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
+
+Required properties:
+  - compatible: "mediatek,mt8173-vpu"
+  - reg: Must contain an entry for each entry in reg-names.
+  - reg-names: Must include the following entries:
+    "tcm": tcm base
+    "cfg_reg": Main configuration registers base
+  - interrupts: interrupt number to the cpu.
+  - clocks : clock name from clock manager
+  - clock-names: must be main. It is the main clock of VPU
+
+Optional properties:
+  - memory-region: phandle to a node describing memory (see
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+    to be used for VPU extended memory; if not present, VPU may be located
+    anywhere in the memory
+
+Example:
+	vpu: vpu@10020000 {
+		compatible = "mediatek,mt8173-vpu";
+		reg = <0 0x10020000 0 0x30000>,
+		      <0 0x10050000 0 0x100>;
+		reg-names = "tcm", "cfg_reg";
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topckgen TOP_SCP_SEL>;
+		clock-names = "main";
+	};
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
new file mode 100644
index 0000000000..b3a345fc64
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CSI2 Demux Controller (CSI2DC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  CSI2DC - Camera Serial Interface 2 Demux Controller
+
+  CSI2DC is a hardware block that receives incoming data from either from an
+  IDI interface or from a parallel bus interface.
+  It filters IDI packets based on their data type and virtual channel
+  identifier, then converts the byte stream to a pixel stream into a cross
+  clock domain towards a parallel interface that can be read by a sensor
+  controller.
+  IDI interface is Synopsys proprietary.
+  CSI2DC can act a simple bypass bridge if the incoming data is coming from
+  a parallel interface.
+
+  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
+  is connected at the output to a sensor controller and the data pipe is
+  accessible as a DMA slave port to a DMA controller.
+
+  CSI2DC supports a single 'port' node as a sink port with either Synopsys
+  32-bit IDI interface or a parallel interface.
+
+  CSI2DC supports one 'port' node as source port with parallel interface.
+  This is called video pipe.
+  This port has an 'endpoint' that can be connected to a sink port of another
+  controller (next in pipeline).
+
+  CSI2DC also supports direct access to the data through AHB, via DMA channel,
+  called data pipe.
+  For data pipe to be available, a dma controller and a dma channel must be
+  referenced.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-csi2dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    description:
+      CSI2DC must have two clocks to function correctly. One clock is the
+      peripheral clock for the inside functionality of the hardware block.
+      This is named 'pclk'. The second clock must be the cross domain clock,
+      in which CSI2DC will perform clock crossing. This clock must be fed
+      by the next controller in pipeline, which usually is a sensor controller.
+      Normally this clock should be given by this sensor controller who
+      is also a clock source. This clock is named 'scck', sensor controller clock.
+    items:
+      - const: pclk
+      - const: scck
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the input port.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+            description: Endpoint connected to input device
+
+            properties:
+              bus-type:
+                enum: [4, 5, 6]
+                default: 4
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              clock-noncontinuous:
+                type: boolean
+                description:
+                  Presence of this boolean property decides whether clock is
+                  continuous or noncontinuous.
+
+              remote-endpoint: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the output port.
+
+        properties:
+          endpoint:
+            unevaluatedProperties: false
+            $ref: video-interfaces.yaml#
+            description: Endpoint connected to output device
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+                default: 5
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              remote-endpoint: true
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+examples:
+  # Example for connecting to a parallel sensor controller block (video pipe)
+  # and the input is received from Synopsys IDI interface
+  - |
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_in: endpoint { /* input from IDI interface */
+                               bus-type = <4>; /* MIPI CSI2 D-PHY */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>; /* must be 1, second child port */
+                       csi2dc_out: endpoint {
+                               remote-endpoint = <&xisc_in>; /* output to sensor controller */
+                       };
+               };
+        };
+    };
+
+  # Example for connecting to a DMA master as an AHB slave
+  # and the input is received from Synopsys IDI interface
+  - |
+    #include <dt-bindings/dma/at91.h>
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>;
+        dma-names = "rx";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_input: endpoint { /* input from IDI interface */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
new file mode 100644
index 0000000000..59b805ca47
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs
+
+maintainers:
+  - Emil Velikov <emil.velikov@collabora.com>
+
+description:
+  Hantro G1 video decode accelerator present on Microchip SAMA5D4 SoCs.
+
+properties:
+  compatible:
+    const: microchip,sama5d4-vdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/at91.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+
+        vdec0: vdec@300000 {
+                compatible = "microchip,sama5d4-vdec";
+                reg = <0x00300000 0x100000>;
+                interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+                clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+        };
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
new file mode 100644
index 0000000000..25f5f79d40
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip eXtended Image Sensor Controller (XISC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description: |
+  The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
+  Microchip AT91 SAM family of devices.
+
+  The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
+  The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
+  parallel sensor.
+
+  The XISC provides one clock output that is used to clock the demuxer/bridge.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-isc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hclock
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: isc-mck
+
+  microchip,mipi-mode:
+    type: boolean
+    description:
+      As the XISC is usually connected to a demux/bridge, the XISC receives
+      the same type of input, however, it should be aware of the type of
+      signals received. The mipi-mode enables different internal handling
+      of the data and clock lines.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description:
+      Input port node, single endpoint describing the input pad.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          remote-endpoint: true
+
+          bus-width:
+            enum: [8, 9, 10, 11, 12, 14]
+            default: 12
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        required:
+          - remote-endpoint
+          - bus-type
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - clock-output-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    xisc: xisc@e1408000 {
+        compatible = "microchip,sama7g5-isc";
+        reg = <0xe1408000 0x2000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+        clock-names = "hclock";
+        #clock-cells = <0>;
+        clock-output-names = "isc-mck";
+
+        port {
+                xisc_in: endpoint {
+                       bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+                       remote-endpoint = <&csi2dc_out>;
+                       hsync-active = <1>;
+                       vsync-active = <1>;
+                       bus-width = <12>;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt
new file mode 100644
index 0000000000..5e18087ce1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mtk-cir.txt
@@ -0,0 +1,28 @@
+Device-Tree bindings for Mediatek consumer IR controller
+found in Mediatek SoC family
+
+Required properties:
+- compatible	    : Should be
+			"mediatek,mt7623-cir": for MT7623 SoC
+			"mediatek,mt7622-cir": for MT7622 SoC
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : should contain
+			- "clk" entries: for MT7623 SoC
+			- "clk", "bus" entries: for MT7622 SoC
+- interrupts	    : should contain IR IRQ number;
+- reg		    : should contain IO map address for IR.
+
+Optional properties:
+- linux,rc-map-name : see rc.txt file in the same directory.
+
+Example:
+
+cir: cir@10013000 {
+	compatible = "mediatek,mt7623-cir";
+	reg = <0 0x10013000 0 0x1000>;
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&infracfg CLK_INFRA_IRRX>;
+	clock-names = "clk";
+	linux,rc-map-name = "rc-rc6-mce";
+};
diff --git a/Documentation/devicetree/bindings/media/nokia,n900-ir b/Documentation/devicetree/bindings/media/nokia,n900-ir
new file mode 100644
index 0000000000..13a18ce37d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nokia,n900-ir
@@ -0,0 +1,20 @@
+Device-Tree bindings for LIRC TX driver for Nokia N900(RX51)
+
+Required properties:
+	- compatible: should be "nokia,n900-ir".
+	- pwms: specifies PWM used for IR signal transmission.
+
+Example node:
+
+	pwm9: dmtimer-pwm@9 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x00>; /* timer_sys_ck */
+		#pwm-cells = <3>;
+	};
+
+	ir: n900-ir {
+		compatible = "nokia,n900-ir";
+
+		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+	};
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
new file mode 100644
index 0000000000..4ecdee1be3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Decoder Engine
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra132-vde
+              - nvidia,tegra124-vde
+              - nvidia,tegra114-vde
+      - items:
+          - const: nvidia,tegra30-vde
+          - const: nvidia,tegra20-vde
+      - items:
+          - const: nvidia,tegra20-vde
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: sxe
+      - const: bsev
+      - const: mbe
+      - const: ppe
+      - const: mce
+      - const: tfe
+      - const: ppb
+      - const: vdma
+      - const: frameid
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: vde
+      - const: mc
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sync-token
+      - const: bsev
+      - const: sxe
+
+  iommus:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the SRAM MMIO node.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property,
+      which is a bitfield indicating SoC speedo or process ID mask.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle to the SoC core power domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - reset-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    video-codec@6001a000 {
+      compatible = "nvidia,tegra20-vde";
+      reg = <0x6001a000 0x1000>, /* Syntax Engine */
+            <0x6001b000 0x1000>, /* Video Bitstream Engine */
+            <0x6001c000  0x100>, /* Macroblock Engine */
+            <0x6001c200  0x100>, /* Post-processing Engine */
+            <0x6001c400  0x100>, /* Motion Compensation Engine */
+            <0x6001c600  0x100>, /* Transform Engine */
+            <0x6001c800  0x100>, /* Pixel prediction block */
+            <0x6001ca00  0x100>, /* Video DMA */
+            <0x6001d800  0x300>; /* Video frame controls */
+      reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+                  "tfe", "ppb", "vdma", "frameid";
+      iram = <&iram>; /* IRAM MMIO region */
+      interrupts = <0  9 4>, /* Sync token */
+                   <0 10 4>, /* BSE-V */
+                   <0 12 4>; /* SXE */
+      interrupt-names = "sync-token", "bsev", "sxe";
+      clocks = <&clk 61>;
+      reset-names = "vde", "mc";
+      resets = <&rst 61>, <&mem 13>;
+      iommus = <&mem 15>;
+      operating-points-v2 = <&dvfs_opp_table>;
+      power-domains = <&domain>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,dw100.yaml b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
new file mode 100644
index 0000000000..21910ff0e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,dw100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP DW100 Dewarper core
+
+maintainers:
+  - Xavier Roumegue <xavier.roumegue@oss.nxp.com>
+
+description: |-
+  The Dewarp Engine provides high-performance dewarp processing for the
+  correction of the distortion that is introduced in images produced by fisheye
+  and wide angle lenses. It is implemented with a line/tile-cache based
+  architecture. With configurable address mapping look up tables and per tile
+  processing, it successfully generates a corrected output image.
+  The engine can be used to perform scaling, cropping and pixel format
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8mp-dw100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The AHB clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    dewarp: dwe@32e30000 {
+            compatible = "nxp,imx8mp-dw100";
+            reg = <0x32e30000 0x10000>;
+            interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                     <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+            clock-names = "axi", "ahb";
+            power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
new file mode 100644
index 0000000000..03a23a26c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
+  receiver IP core named CSIS. The IP core originates from Samsung, and may be
+  compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
+  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
+
+  While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
+  completely wrapped by the CSIS and doesn't expose a control interface of its
+  own. This binding thus covers both IP cores.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7-mipi-csi2
+          - fsl,imx8mm-mipi-csi2
+      - items:
+          - enum:
+              - fsl,imx8mp-mipi-csi2
+          - const: fsl,imx8mm-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: The peripheral clock (a.k.a. APB clock)
+      - description: The external clock (optionally used as the pixel clock)
+      - description: The MIPI D-PHY clock
+      - description: The AXI clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: wrap
+      - const: phy
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  phy-supply:
+    description: The MIPI D-PHY digital power supply
+
+  resets:
+    items:
+      - description: MIPI D-PHY slave reset
+
+  clock-frequency:
+    description: The desired external clock ("wrap") frequency, in Hz
+    default: 166000000
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7-mipi-csi2
+    then:
+      required:
+        - phy-supply
+        - resets
+    else:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+        phy-supply: false
+        resets: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/imx7-reset.h>
+
+    mipi-csi@30750000 {
+        compatible = "fsl,imx7-mipi-csi2";
+        reg = <0x30750000 0x10000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+        clock-names = "pclk", "wrap", "phy";
+        clock-frequency = <166000000>;
+
+        power-domains = <&pgc_mipi_phy>;
+        phy-supply = <&reg_1p0d>;
+        resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                mipi_from_sensor: endpoint {
+                    remote-endpoint = <&ov2680_to_mipi>;
+                    data-lanes = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                mipi_vc0_to_csi_mux: endpoint {
+                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi-csi@32e30000 {
+        compatible = "fsl,imx8mm-mipi-csi2";
+        reg = <0x32e30000 0x1000>;
+        interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <333000000>;
+        clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+                 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+        clock-names = "pclk", "wrap", "phy", "axi";
+        power-domains = <&mipi_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
new file mode 100644
index 0000000000..326284e151
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX7 and i.MX8 CSI bridge (CMOS Sensor Interface)
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+
+description: |
+  This is device node for the CMOS Sensor Interface (CSI) which enables the
+  chip to connect directly to external CMOS image sensors.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mq-csi
+          - fsl,imx7-csi
+          - fsl,imx6ul-csi
+      - items:
+          - const: fsl,imx8mm-csi
+          - const: fsl,imx7-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  power-domains:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mm-csi
+    then:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    csi: csi@30710000 {
+            compatible = "fsl,imx7-csi";
+            reg = <0x30710000 0x10000>;
+            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clks IMX7D_CSI_MCLK_ROOT_CLK>;
+            clock-names = "mclk";
+
+            port {
+                    csi_from_csi_mux: endpoint {
+                            remote-endpoint = <&csi_mux_to_csi>;
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
new file mode 100644
index 0000000000..e4665469a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8 Image Sensing Interface
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mn-isi
+      - fsl,imx8mp-isi
+      - fsl,imx93-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The APB clock
+      # TODO: Check if the per-channel ipg_proc_clk clocks need to be specified
+      # as well, in case some SoCs have the ability to control them separately.
+      # This may be the case of the i.MX8[DQ]X(P)
+
+  clock-names:
+    items:
+      - const: axi
+      - const: apb
+
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the block control that contains the CSIS to ISI
+      gasket.
+
+  interrupts:
+    description: Processing pipeline interrupts, one per pipeline
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Ports represent the Pixel Link inputs to the ISI. Their number and
+      assignment are model-dependent. Each port shall have a single endpoint.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - fsl,blk-ctrl
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mn-isi
+              - fsl,imx93-isi
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        ports:
+          properties:
+            port@0:
+              description: MIPI CSI-2 RX
+          required:
+            - port@0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isi
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        ports:
+          properties:
+            port@0:
+              description: MIPI CSI-2 RX 0
+            port@1:
+              description: MIPI CSI-2 RX 1
+          required:
+            - port@0
+            - port@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    isi@32e20000 {
+        compatible = "fsl,imx8mn-isi";
+        reg = <0x32e20000 0x100>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+                 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+        clock-names = "axi", "apb";
+        fsl,blk-ctrl = <&disp_blk_ctrl>;
+        power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                isi_in: endpoint {
+                    remote-endpoint = <&mipi_csi_out>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    isi@32e00000 {
+        compatible = "fsl,imx8mp-isi";
+        reg = <0x32e00000 0x4000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+        clock-names = "axi", "apb";
+        fsl,blk-ctrl = <&media_blk_ctrl>;
+        power-domains = <&mediamix_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                isi_in_0: endpoint {
+                    remote-endpoint = <&mipi_csi_0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                isi_in_1: endpoint {
+                    remote-endpoint = <&mipi_csi_1_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
new file mode 100644
index 0000000000..3d9d1db370
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP/QM JPEG decoder/encoder
+
+maintainers:
+  - Mirela Rabulea <mirela.rabulea@nxp.com>
+
+description: |-
+  The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs is an
+  ISO/IEC 10918-1 JPEG standard compliant decoder/encoder, for Baseline
+  and Extended Sequential DCT modes.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          enum:
+            - nxp,imx8qxp-jpgdec
+            - nxp,imx8qxp-jpgenc
+      - items:
+          - const: nxp,imx8qm-jpgdec
+          - const: nxp,imx8qxp-jpgdec
+      - items:
+          - const: nxp,imx8qm-jpgenc
+          - const: nxp,imx8qxp-jpgenc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      There are 4 slots available in the IP, which the driver may use
+      If a certain slot is used, it should have an associated interrupt
+      The interrupt with index i is assumed to be for slot i
+    minItems: 1               # At least one slot is needed by the driver
+    maxItems: 4               # The IP has 4 slots available for use
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    minItems: 2               # Wrapper and 1 slot
+    maxItems: 5               # Wrapper and 4 slots
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    jpegdec: jpegdec@58400000 {
+        compatible = "nxp,imx8qxp-jpgdec";
+        reg = <0x58400000 0x00050000 >;
+        interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S0>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S1>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S2>,
+                        <&pd IMX_SC_R_MJPEG_DEC_S3>;
+    };
+
+    jpegenc: jpegenc@58450000 {
+        compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
+        reg = <0x58450000 0x00050000 >;
+        interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S0>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S1>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S2>,
+                        <&pd IMX_SC_R_MJPEG_ENC_S3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
new file mode 100644
index 0000000000..2a14e3b0e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: ui is the pixel clock (phy_ref up to 333Mhz).
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: ui
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CORE_RESET reset register bit definition
+      - description: PHY_REF_RESET reset register bit definition
+      - description: ESC_RESET reset register bit definition
+
+  fsl,mipi-phy-gpr:
+    description: |
+      The phandle to the imx8mq syscon iomux-gpr with the register
+      for setting RX_ENABLE for the mipi receiver.
+
+      The format should be as follows:
+      <gpr req_gpr>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset containing
+                        CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+            maximum: 0xff
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - fsl,mipi-phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+        clock-names = "core", "esc", "ui";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
new file mode 100644
index 0000000000..3d58f02b0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Hantro G1/G2 video decode accelerators present on i.MX8MQ SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,imx8mq-vpu
+        deprecated: true
+      - const: nxp,imx8mq-vpu-g1
+      - const: nxp,imx8mq-vpu-g2
+      - const: nxp,imx8mm-vpu-g1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g1: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g1";
+                reg = <0x38300000 0x10000>;
+                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+        };
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g2: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g2";
+                reg = <0x38310000 0x10000>;
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+        };
diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt
new file mode 100644
index 0000000000..bc03ec0962
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/pxa-camera.txt
@@ -0,0 +1,42 @@
+Marvell PXA camera host interface
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-qci"
+ - reg: register base and size
+ - interrupts: the interrupt number
+ - any required generic properties defined in video-interfaces.txt
+
+Optional properties:
+ - clocks: input clock (see clock-bindings.txt)
+ - clock-output-names: should contain the name of the clock driving the
+                       sensor master clock MCLK
+ - clock-frequency: host interface is driving MCLK, and MCLK rate is this rate
+
+Example:
+
+	pxa_camera: pxa_camera@50000000 {
+		compatible = "marvell,pxa270-qci";
+		reg = <0x50000000 0x1000>;
+		interrupts = <33>;
+
+		clocks = <&pxa2xx_clks 24>;
+		clock-names = "ciclk";
+		clock-frequency = <50000000>;
+		clock-output-names = "qci_mclk";
+
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Parallel bus endpoint */
+			qci: endpoint@0 {
+				reg = <0>;		/* Local endpoint # */
+				remote-endpoint = <&mt9m111_1>;
+				bus-width = <8>;	/* Used data lines */
+				hsync-active = <0>;	/* Active low */
+				vsync-active = <0>;	/* Active low */
+				pclk-sample = <1>;	/* Rising */
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
new file mode 100644
index 0000000000..9cc0a968a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - Todor Tomov <todor.too@gmail.com>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8916-camss
+
+  clocks:
+    minItems: 19
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: top_ahb
+      - const: ispif_ahb
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: ahb
+      - const: vfe0
+      - const: csi_vfe0
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    minItems: 6
+    maxItems: 6
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: vfe0
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: VFE GDSC - Video Front End, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index. Lane swapping
+                  is supported. Physical lane indexes;
+                  0, 2, 3, 4.
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: csi_clk_mux
+      - const: vfe0
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    camss: camss@1b0ac00 {
+      compatible = "qcom,msm8916-camss";
+
+      clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+        <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+        <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+        <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+        <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+        <&gcc GCC_CAMSS_CSI0_CLK>,
+        <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+        <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+        <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+        <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+        <&gcc GCC_CAMSS_CSI1_CLK>,
+        <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+        <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+        <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+        <&gcc GCC_CAMSS_AHB_CLK>,
+        <&gcc GCC_CAMSS_VFE0_CLK>,
+        <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+        <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+        <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+
+      clock-names = "top_ahb",
+        "ispif_ahb",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "ahb",
+        "vfe0",
+        "csi_vfe0",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csiphy0",
+        "csiphy1",
+        "csid0",
+        "csid1",
+        "ispif",
+        "vfe0";
+
+      iommus = <&apps_iommu 3>;
+
+      power-domains = <&gcc VFE_GDSC>;
+
+      reg = <0x01b0ac00 0x200>,
+        <0x01b00030 0x4>,
+        <0x01b0b000 0x200>,
+        <0x01b00038 0x4>,
+        <0x01b08000 0x100>,
+        <0x01b08400 0x100>,
+        <0x01b0a000 0x500>,
+        <0x01b00020 0x10>,
+        <0x01b10000 0x1000>;
+
+      reg-names = "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csid0",
+        "csid1",
+        "ispif",
+        "csi_clk_mux",
+        "vfe0";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
new file mode 100644
index 0000000000..9410f13ca9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8916-venus
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+
+  iommus:
+    maxItems: 1
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    video-codec@1d00000 {
+        compatible = "qcom,msm8916-venus";
+        reg = <0x01d00000 0xff000>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+                 <&gcc GCC_VENUS0_AHB_CLK>,
+                 <&gcc GCC_VENUS0_AXI_CLK>;
+        clock-names = "core", "iface", "bus";
+        power-domains = <&gcc VENUS_GDSC>;
+        iommus = <&apps_iommu 5>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
new file mode 100644
index 0000000000..5cb0e337ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -0,0 +1,367 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - Todor Tomov <todor.too@gmail.com>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8996-camss
+
+  clocks:
+    minItems: 36
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: top_ahb
+      - const: ispif_ahb
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csiphy2_timer
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csi3_ahb
+      - const: csi3
+      - const: csi3_phy
+      - const: csi3_pix
+      - const: csi3_rdi
+      - const: ahb
+      - const: vfe0
+      - const: csi_vfe0
+      - const: vfe0_ahb
+      - const: vfe0_stream
+      - const: vfe1
+      - const: csi_vfe1
+      - const: vfe1_ahb
+      - const: vfe1_stream
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
+      - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index. Lane swapping
+                  is supported. Physical lane indexes are;
+                  0, 1, 2, 3
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 14
+    maxItems: 14
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csiphy2
+      - const: csiphy2_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: ispif
+      - const: csi_clk_mux
+      - const: vfe0
+      - const: vfe1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+    camss: camss@a34000 {
+      compatible = "qcom,msm8996-camss";
+
+      clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+        <&mmcc CAMSS_ISPIF_AHB_CLK>,
+        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI0_AHB_CLK>,
+        <&mmcc CAMSS_CSI0_CLK>,
+        <&mmcc CAMSS_CSI0PHY_CLK>,
+        <&mmcc CAMSS_CSI0PIX_CLK>,
+        <&mmcc CAMSS_CSI0RDI_CLK>,
+        <&mmcc CAMSS_CSI1_AHB_CLK>,
+        <&mmcc CAMSS_CSI1_CLK>,
+        <&mmcc CAMSS_CSI1PHY_CLK>,
+        <&mmcc CAMSS_CSI1PIX_CLK>,
+        <&mmcc CAMSS_CSI1RDI_CLK>,
+        <&mmcc CAMSS_CSI2_AHB_CLK>,
+        <&mmcc CAMSS_CSI2_CLK>,
+        <&mmcc CAMSS_CSI2PHY_CLK>,
+        <&mmcc CAMSS_CSI2PIX_CLK>,
+        <&mmcc CAMSS_CSI2RDI_CLK>,
+        <&mmcc CAMSS_CSI3_AHB_CLK>,
+        <&mmcc CAMSS_CSI3_CLK>,
+        <&mmcc CAMSS_CSI3PHY_CLK>,
+        <&mmcc CAMSS_CSI3PIX_CLK>,
+        <&mmcc CAMSS_CSI3RDI_CLK>,
+        <&mmcc CAMSS_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_CLK>,
+        <&mmcc CAMSS_CSI_VFE0_CLK>,
+        <&mmcc CAMSS_VFE0_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_STREAM_CLK>,
+        <&mmcc CAMSS_VFE1_CLK>,
+        <&mmcc CAMSS_CSI_VFE1_CLK>,
+        <&mmcc CAMSS_VFE1_AHB_CLK>,
+        <&mmcc CAMSS_VFE1_STREAM_CLK>,
+        <&mmcc CAMSS_VFE_AHB_CLK>,
+        <&mmcc CAMSS_VFE_AXI_CLK>;
+
+      clock-names = "top_ahb",
+        "ispif_ahb",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csiphy2_timer",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "csi2_ahb",
+        "csi2",
+        "csi2_phy",
+        "csi2_pix",
+        "csi2_rdi",
+        "csi3_ahb",
+        "csi3",
+        "csi3_phy",
+        "csi3_pix",
+        "csi3_rdi",
+        "ahb",
+        "vfe0",
+        "csi_vfe0",
+        "vfe0_ahb",
+        "vfe0_stream",
+        "vfe1",
+        "csi_vfe1",
+        "vfe1_ahb",
+        "vfe1_stream",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csiphy0",
+        "csiphy1",
+        "csiphy2",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      iommus = <&vfe_smmu 0>,
+         <&vfe_smmu 1>,
+         <&vfe_smmu 2>,
+         <&vfe_smmu 3>;
+
+      power-domains = <&mmcc VFE0_GDSC>,
+        <&mmcc VFE1_GDSC>;
+
+      reg = <0x00a34000 0x1000>,
+        <0x00a00030 0x4>,
+        <0x00a35000 0x1000>,
+        <0x00a00038 0x4>,
+        <0x00a36000 0x1000>,
+        <0x00a00040 0x4>,
+        <0x00a30000 0x100>,
+        <0x00a30400 0x100>,
+        <0x00a30800 0x100>,
+        <0x00a30c00 0x100>,
+        <0x00a31000 0x500>,
+        <0x00a00020 0x10>,
+        <0x00a10000 0x1000>,
+        <0x00a14000 0x1000>;
+
+      reg-names = "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csiphy2",
+        "csiphy2_clk_mux",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "ispif",
+        "csi_clk_mux",
+        "vfe0",
+        "vfe1";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
new file mode 100644
index 0000000000..3a4d817e54
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8996-venus
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: mbus
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
+  iommus:
+    maxItems: 20
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+    video-codec@c00000 {
+        compatible = "qcom,msm8996-venus";
+        reg = <0x00c00000 0xff000>;
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mmcc VIDEO_CORE_CLK>,
+                 <&mmcc VIDEO_AHB_CLK>,
+                 <&mmcc VIDEO_AXI_CLK>,
+                 <&mmcc VIDEO_MAXI_CLK>;
+        clock-names = "core", "iface", "bus", "mbus";
+        power-domains = <&mmcc VENUS_GDSC>;
+        iommus =  <&venus_smmu 0x00>,
+                  <&venus_smmu 0x01>,
+                  <&venus_smmu 0x0a>,
+                  <&venus_smmu 0x07>,
+                  <&venus_smmu 0x0e>,
+                  <&venus_smmu 0x0f>,
+                  <&venus_smmu 0x08>,
+                  <&venus_smmu 0x09>,
+                  <&venus_smmu 0x0b>,
+                  <&venus_smmu 0x0c>,
+                  <&venus_smmu 0x0d>,
+                  <&venus_smmu 0x10>,
+                  <&venus_smmu 0x11>,
+                  <&venus_smmu 0x21>,
+                  <&venus_smmu 0x28>,
+                  <&venus_smmu 0x29>,
+                  <&venus_smmu 0x2b>,
+                  <&venus_smmu 0x2c>,
+                  <&venus_smmu 0x2d>,
+                  <&venus_smmu 0x31>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+            clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+            clock-names = "core";
+            power-domains = <&mmcc VENUS_CORE1_GDSC>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
new file mode 100644
index 0000000000..5cec1d077c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7180-venus
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: cx
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: vcodec0_core
+      - const: vcodec0_bus
+
+  iommus:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domain-names
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sc7180-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&videocc VENUS_GDSC>,
+                        <&videocc VCODEC0_GDSC>;
+        power-domain-names = "venus", "vcodec0";
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+        clock-names = "core", "iface", "bus",
+                      "vcodec0_core", "vcodec0_bus";
+        iommus = <&apps_smmu 0x0c00 0x60>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
new file mode 100644
index 0000000000..8f9b6433ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus Iris2 IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-venus
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: cx
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+      - const: iface
+      - const: vcodec_core
+      - const: vcodec_bus
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domain-names
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sc7280.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sc7280-venus";
+        reg = <0x0aa00000 0xd0600>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+                 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+                 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+        clock-names = "core", "bus", "iface",
+                      "vcodec_core", "vcodec_bus";
+
+        power-domains = <&videocc MVSC_GDSC>,
+                        <&videocc MVS0_GDSC>,
+                        <&rpmhpd SC7280_CX>;
+        power-domain-names = "venus", "vcodec0", "cx";
+
+        interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+                        <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        iommus = <&apps_smmu 0x2180 0x20>,
+                 <&apps_smmu 0x2184 0x20>;
+
+        memory-region = <&video_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+        };
+
+        video-firmware {
+            iommus = <&apps_smmu 0x21a2 0x0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
new file mode 100644
index 0000000000..584106e275
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -0,0 +1,385 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm660-camss
+
+  clocks:
+    minItems: 42
+    maxItems: 42
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: cphy_csid0
+      - const: cphy_csid1
+      - const: cphy_csid2
+      - const: cphy_csid3
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csi3_ahb
+      - const: csi3
+      - const: csi3_phy
+      - const: csi3_pix
+      - const: csi3_rdi
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csiphy2_timer
+      - const: csiphy_ahb2crif
+      - const: csi_vfe0
+      - const: csi_vfe1
+      - const: ispif_ahb
+      - const: throttle_axi
+      - const: top_ahb
+      - const: vfe0_ahb
+      - const: vfe0
+      - const: vfe0_stream
+      - const: vfe1_ahb
+      - const: vfe1
+      - const: vfe1_stream
+      - const: vfe_ahb
+      - const: vfe_axi
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: vfe-mem
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
+      - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 14
+    maxItems: 14
+
+  reg-names:
+    items:
+      - const: csi_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csiphy2
+      - const: csiphy2_clk_mux
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+
+    camss: camss@ca00020 {
+      compatible = "qcom,sdm660-camss";
+
+      clocks = <&mmcc CAMSS_AHB_CLK>,
+        <&mmcc CAMSS_CPHY_CSID0_CLK>,
+        <&mmcc CAMSS_CPHY_CSID1_CLK>,
+        <&mmcc CAMSS_CPHY_CSID2_CLK>,
+        <&mmcc CAMSS_CPHY_CSID3_CLK>,
+        <&mmcc CAMSS_CSI0_AHB_CLK>,
+        <&mmcc CAMSS_CSI0_CLK>,
+        <&mmcc CAMSS_CPHY_CSID0_CLK>,
+        <&mmcc CAMSS_CSI0PIX_CLK>,
+        <&mmcc CAMSS_CSI0RDI_CLK>,
+        <&mmcc CAMSS_CSI1_AHB_CLK>,
+        <&mmcc CAMSS_CSI1_CLK>,
+        <&mmcc CAMSS_CPHY_CSID1_CLK>,
+        <&mmcc CAMSS_CSI1PIX_CLK>,
+        <&mmcc CAMSS_CSI1RDI_CLK>,
+        <&mmcc CAMSS_CSI2_AHB_CLK>,
+        <&mmcc CAMSS_CSI2_CLK>,
+        <&mmcc CAMSS_CPHY_CSID2_CLK>,
+        <&mmcc CAMSS_CSI2PIX_CLK>,
+        <&mmcc CAMSS_CSI2RDI_CLK>,
+        <&mmcc CAMSS_CSI3_AHB_CLK>,
+        <&mmcc CAMSS_CSI3_CLK>,
+        <&mmcc CAMSS_CPHY_CSID3_CLK>,
+        <&mmcc CAMSS_CSI3PIX_CLK>,
+        <&mmcc CAMSS_CSI3RDI_CLK>,
+        <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+        <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+        <&mmcc CSIPHY_AHB2CRIF_CLK>,
+        <&mmcc CAMSS_CSI_VFE0_CLK>,
+        <&mmcc CAMSS_CSI_VFE1_CLK>,
+        <&mmcc CAMSS_ISPIF_AHB_CLK>,
+        <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+        <&mmcc CAMSS_TOP_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_AHB_CLK>,
+        <&mmcc CAMSS_VFE0_CLK>,
+        <&mmcc CAMSS_VFE0_STREAM_CLK>,
+        <&mmcc CAMSS_VFE1_AHB_CLK>,
+        <&mmcc CAMSS_VFE1_CLK>,
+        <&mmcc CAMSS_VFE1_STREAM_CLK>,
+        <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+        <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+
+      clock-names = "ahb",
+        "cphy_csid0",
+        "cphy_csid1",
+        "cphy_csid2",
+        "cphy_csid3",
+        "csi0_ahb",
+        "csi0",
+        "csi0_phy",
+        "csi0_pix",
+        "csi0_rdi",
+        "csi1_ahb",
+        "csi1",
+        "csi1_phy",
+        "csi1_pix",
+        "csi1_rdi",
+        "csi2_ahb",
+        "csi2",
+        "csi2_phy",
+        "csi2_pix",
+        "csi2_rdi",
+        "csi3_ahb",
+        "csi3",
+        "csi3_phy",
+        "csi3_pix",
+        "csi3_rdi",
+        "csiphy0_timer",
+        "csiphy1_timer",
+        "csiphy2_timer",
+        "csiphy_ahb2crif",
+        "csi_vfe0",
+        "csi_vfe1",
+        "ispif_ahb",
+        "throttle_axi",
+        "top_ahb",
+        "vfe0_ahb",
+        "vfe0",
+        "vfe0_stream",
+        "vfe1_ahb",
+        "vfe1",
+        "vfe1_stream",
+        "vfe_ahb",
+        "vfe_axi";
+
+      interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+        <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+      interrupt-names = "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "csiphy0",
+        "csiphy1",
+        "csiphy2",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      iommus = <&mmss_smmu 0xc00>,
+        <&mmss_smmu 0xc01>,
+        <&mmss_smmu 0xc02>,
+        <&mmss_smmu 0xc03>;
+
+      power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+        <&mmcc CAMSS_VFE1_GDSC>;
+
+      reg = <0x0ca00020 0x10>,
+        <0x0ca30000 0x100>,
+        <0x0ca30400 0x100>,
+        <0x0ca30800 0x100>,
+        <0x0ca30c00 0x100>,
+        <0x0c824000 0x1000>,
+        <0x0ca00120 0x4>,
+        <0x0c825000 0x1000>,
+        <0x0ca00124 0x4>,
+        <0x0c826000 0x1000>,
+        <0x0ca00128 0x4>,
+        <0x0ca31000 0x500>,
+        <0x0ca10000 0x1000>,
+        <0x0ca14000 0x1000>;
+
+      reg-names = "csi_clk_mux",
+        "csid0",
+        "csid1",
+        "csid2",
+        "csid3",
+        "csiphy0",
+        "csiphy0_clk_mux",
+        "csiphy1",
+        "csiphy1_clk_mux",
+        "csiphy2",
+        "csiphy2_clk_mux",
+        "ispif",
+        "vfe0",
+        "vfe1";
+
+      vdda-supply = <&reg_2v8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
new file mode 100644
index 0000000000..a51835b220
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm660-venus
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: bus_throttle
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  iommus:
+    maxItems: 20
+
+  power-domains:
+    maxItems: 1
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: vcodec0_core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: vcodec0_core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-codec@cc00000 {
+        compatible = "qcom,sdm660-venus";
+        reg = <0x0cc00000 0xff000>;
+        clocks = <&mmcc VIDEO_CORE_CLK>,
+                 <&mmcc VIDEO_AHB_CLK>,
+                 <&mmcc VIDEO_AXI_CLK>,
+                 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+        clock-names = "core", "iface", "bus", "bus_throttle";
+        interconnects = <&gnoc 0 &mnoc 13>,
+                        <&mnoc 4 &bimc 5>;
+        interconnect-names = "cpu-cfg", "video-mem";
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&mmss_smmu 0x400>,
+                 <&mmss_smmu 0x401>,
+                 <&mmss_smmu 0x40a>,
+                 <&mmss_smmu 0x407>,
+                 <&mmss_smmu 0x40e>,
+                 <&mmss_smmu 0x40f>,
+                 <&mmss_smmu 0x408>,
+                 <&mmss_smmu 0x409>,
+                 <&mmss_smmu 0x40b>,
+                 <&mmss_smmu 0x40c>,
+                 <&mmss_smmu 0x40d>,
+                 <&mmss_smmu 0x410>,
+                 <&mmss_smmu 0x421>,
+                 <&mmss_smmu 0x428>,
+                 <&mmss_smmu 0x429>,
+                 <&mmss_smmu 0x42b>,
+                 <&mmss_smmu 0x42c>,
+                 <&mmss_smmu 0x42d>,
+                 <&mmss_smmu 0x411>,
+                 <&mmss_smmu 0x431>;
+        memory-region = <&venus_region>;
+        power-domains = <&mmcc VENUS_GDSC>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "vcodec0_core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "vcodec0_core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
new file mode 100644
index 0000000000..ec4380a0a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm845-camss
+
+  clocks:
+    minItems: 36
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cphy_rx_src
+      - const: csi0
+      - const: csi0_src
+      - const: csi1
+      - const: csi1_src
+      - const: csi2
+      - const: csi2_src
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy0_timer_src
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy1_timer_src
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy2_timer_src
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy3_timer_src
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: slow_ahb_src
+      - const: soc_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_src
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_src
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_src
+
+  interrupts:
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      camss: camss@acb3000 {
+        compatible = "qcom,sdm845-camss";
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+          <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+          <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+          <&gcc GCC_CAMERA_AHB_CLK>,
+          <&gcc GCC_CAMERA_AXI_CLK>,
+          <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+          <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+
+        clock-names = "camnoc_axi",
+          "cpas_ahb",
+          "cphy_rx_src",
+          "csi0",
+          "csi0_src",
+          "csi1",
+          "csi1_src",
+          "csi2",
+          "csi2_src",
+          "csiphy0",
+          "csiphy0_timer",
+          "csiphy0_timer_src",
+          "csiphy1",
+          "csiphy1_timer",
+          "csiphy1_timer_src",
+          "csiphy2",
+          "csiphy2_timer",
+          "csiphy2_timer_src",
+          "csiphy3",
+          "csiphy3_timer",
+          "csiphy3_timer_src",
+          "gcc_camera_ahb",
+          "gcc_camera_axi",
+          "slow_ahb_src",
+          "soc_ahb",
+          "vfe0_axi",
+          "vfe0",
+          "vfe0_cphy_rx",
+          "vfe0_src",
+          "vfe1_axi",
+          "vfe1",
+          "vfe1_cphy_rx",
+          "vfe1_src",
+          "vfe_lite",
+          "vfe_lite_cphy_rx",
+          "vfe_lite_src";
+
+        interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        iommus = <&apps_smmu 0x0808 0x0>,
+          <&apps_smmu 0x0810 0x8>,
+          <&apps_smmu 0x0c08 0x0>,
+          <&apps_smmu 0x0c10 0x8>;
+
+        power-domains = <&clock_camcc IFE_0_GDSC>,
+          <&clock_camcc IFE_1_GDSC>,
+          <&clock_camcc TITAN_TOP_GDSC>;
+
+        reg = <0 0xacb3000 0 0x1000>,
+          <0 0xacba000 0 0x1000>,
+          <0 0xacc8000 0 0x1000>,
+          <0 0xac65000 0 0x1000>,
+          <0 0xac66000 0 0x1000>,
+          <0 0xac67000 0 0x1000>,
+          <0 0xac68000 0 0x1000>,
+          <0 0xacaf000 0 0x4000>,
+          <0 0xacb6000 0 0x4000>,
+          <0 0xacc4000 0 0x4000>;
+
+        reg-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l26a_1p2>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
new file mode 100644
index 0000000000..d5f80976f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Venus v2 video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-venus-v2
+
+  power-domains:
+    minItems: 3
+    maxItems: 4
+
+  power-domain-names:
+    minItems: 3
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: vcodec1
+      - const: cx
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: vcodec0_core
+      - const: vcodec0_bus
+      - const: vcodec1_core
+      - const: vcodec1_bus
+
+  iommus:
+    maxItems: 2
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  video-core0:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-core1:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domain-names
+  - iommus
+  - video-core0
+  - video-core1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sdm845-venus-v2";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+        clock-names = "core", "iface", "bus",
+                      "vcodec0_core", "vcodec0_bus",
+                      "vcodec1_core", "vcodec1_bus";
+        power-domains = <&videocc VENUS_GDSC>,
+                        <&videocc VCODEC0_GDSC>,
+                        <&videocc VCODEC1_GDSC>;
+        power-domain-names = "venus", "vcodec0", "vcodec1";
+        iommus = <&apps_smmu 0x10a0 0x8>,
+                 <&apps_smmu 0x10b0 0x0>;
+        memory-region = <&venus_mem>;
+
+        video-core0 {
+            compatible = "venus-decoder";
+        };
+
+        video-core1 {
+            compatible = "venus-encoder";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
new file mode 100644
index 0000000000..eabc0957b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-venus
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+
+  iommus:
+    maxItems: 2
+
+  video-core0:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        items:
+          - const: core
+          - const: bus
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-core1:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        items:
+          - const: core
+          - const: bus
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - iommus
+  - video-core0
+  - video-core1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sdm845-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
+        clock-names = "core", "iface", "bus";
+        power-domains = <&videocc VENUS_GDSC>;
+        iommus = <&apps_smmu 0x10a0 0x8>,
+                 <&apps_smmu 0x10b0 0x0>;
+        memory-region = <&venus_mem>;
+
+        video-core0 {
+            compatible = "venus-decoder";
+            clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                     <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+            clock-names = "core", "bus";
+            power-domains = <&videocc VCODEC0_GDSC>;
+        };
+
+        video-core1 {
+            compatible = "venus-encoder";
+            clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                     <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+            clock-names = "core", "bus";
+            power-domains = <&videocc VCODEC1_GDSC>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 0000000000..fa5073c0fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,463 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8250-camss
+
+  clocks:
+    minItems: 37
+    maxItems: 37
+
+  clock-names:
+    items:
+      - const: cam_ahb_clk
+      - const: cam_hf_axi
+      - const: cam_sf_axi
+      - const: camnoc_axi
+      - const: camnoc_axi_src
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: slow_ahb_src
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_areg
+      - const: vfe1_ahb
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_areg
+      - const: vfe_lite_ahb
+      - const: vfe_lite_axi
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    minItems: 14
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    minItems: 8
+    maxItems: 8
+
+  interconnects:
+    minItems: 4
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_0_mnoc
+      - const: cam_sf_0_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac6a000 {
+            compatible = "qcom,sm8250-camss";
+
+            reg = <0 0xac6a000 0 0x2000>,
+                  <0 0xac6c000 0 0x2000>,
+                  <0 0xac6e000 0 0x1000>,
+                  <0 0xac70000 0 0x1000>,
+                  <0 0xac72000 0 0x1000>,
+                  <0 0xac74000 0 0x1000>,
+                  <0 0xacb4000 0 0xd000>,
+                  <0 0xacc3000 0 0xd000>,
+                  <0 0xacd9000 0 0x2200>,
+                  <0 0xacdb200 0 0x2200>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            vdda-phy-supply = <&vreg_l5a_0p88>;
+            vdda-pll-supply = <&vreg_l9a_1p2>;
+
+            interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid3",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_0_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_1_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "cam_ahb_clk",
+                          "cam_hf_axi",
+                          "cam_sf_axi",
+                          "camnoc_axi",
+                          "camnoc_axi_src",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "slow_ahb_src",
+                          "vfe0_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe0_areg",
+                          "vfe1_ahb",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe1_areg",
+                          "vfe_lite_ahb",
+                          "vfe_lite_axi",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            iommus = <&apps_smmu 0x800 0x400>,
+                     <&apps_smmu 0x801 0x400>,
+                     <&apps_smmu 0x840 0x400>,
+                     <&apps_smmu 0x841 0x400>,
+                     <&apps_smmu 0xC00 0x400>,
+                     <&apps_smmu 0xC01 0x400>,
+                     <&apps_smmu 0xC40 0x400>,
+                     <&apps_smmu 0xC41 0x400>;
+
+            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+                            <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_0_mnoc",
+                                 "cam_sf_0_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
new file mode 100644
index 0000000000..f66033ae8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-venus
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: mx
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+      - const: vcodec0_core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: bus
+      - const: core
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domain-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - resets
+  - reset-names
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sm8250-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&videocc MVS0C_GDSC>,
+                        <&videocc MVS0_GDSC>,
+                        <&rpmhpd RPMHPD_MX>;
+        power-domain-names = "venus", "vcodec0", "mx";
+
+        clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+                 <&videocc VIDEO_CC_MVS0C_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CLK>;
+        clock-names = "iface", "core", "vcodec0_core";
+
+        interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
+                        <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        iommus = <&apps_smmu 0x2100 0x0400>;
+        memory-region = <&video_mem>;
+
+        resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+                 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+        reset-names = "bus", "core";
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,venus-common.yaml b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml
new file mode 100644
index 0000000000..3153d91f9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,venus-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC Venus Video Encode and Decode Accelerators Common Properties
+
+maintainers:
+  - Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
+  - Vikash Garodia <quic_vgarodia@quicinc.com>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 7
+
+  clock-names:
+    minItems: 3
+    maxItems: 7
+
+  firmware-name:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 20
+
+  memory-region:
+    maxItems: 1
+
+  power-domains:
+    minItems: 1
+    maxItems: 4
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 4
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - memory-region
+  - power-domains
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/rc.txt b/Documentation/devicetree/bindings/media/rc.txt
new file mode 100644
index 0000000000..be629f7fa7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rc.txt
@@ -0,0 +1 @@
+This file has been moved to rc.yaml.
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
new file mode 100644
index 0000000000..7bbe580c80
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Infrared Remote Controller
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab@kernel.org>
+  - Sean Young <sean@mess.org>
+
+properties:
+  $nodename:
+    pattern: "^ir(-receiver)?(@[a-f0-9]+)?$"
+
+  linux,rc-map-name:
+    description:
+      Specifies the scancode/key mapping table defined in-kernel for
+      the remote controller.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - rc-adstech-dvb-t-pci
+      - rc-alink-dtu-m
+      - rc-anysee
+      - rc-apac-viewcomp
+      - rc-astrometa-t2hybrid
+      - rc-asus-pc39
+      - rc-asus-ps3-100
+      - rc-ati-tv-wonder-hd-600
+      - rc-ati-x10
+      - rc-avermedia
+      - rc-avermedia-a16d
+      - rc-avermedia-cardbus
+      - rc-avermedia-dvbt
+      - rc-avermedia-m135a
+      - rc-avermedia-m733a-rm-k6
+      - rc-avermedia-rm-ks
+      - rc-avertv-303
+      - rc-azurewave-ad-tu700
+      - rc-beelink-gs1
+      - rc-beelink-mxiii
+      - rc-behold
+      - rc-behold-columbus
+      - rc-budget-ci-old
+      - rc-cec
+      - rc-cinergy
+      - rc-cinergy-1400
+      - rc-ct-90405
+      - rc-d680-dmb
+      - rc-delock-61959
+      - rc-dib0700-nec
+      - rc-dib0700-rc5
+      - rc-digitalnow-tinytwin
+      - rc-digittrade
+      - rc-dm1105-nec
+      - rc-dntv-live-dvb-t
+      - rc-dntv-live-dvbt-pro
+      - rc-dreambox
+      - rc-dtt200u
+      - rc-dvbsky
+      - rc-dvico-mce
+      - rc-dvico-portable
+      - rc-em-terratec
+      - rc-empty
+      - rc-encore-enltv
+      - rc-encore-enltv-fm53
+      - rc-encore-enltv2
+      - rc-evga-indtube
+      - rc-eztv
+      - rc-flydvb
+      - rc-flyvideo
+      - rc-fusionhdtv-mce
+      - rc-gadmei-rm008z
+      - rc-geekbox
+      - rc-genius-tvgo-a11mce
+      - rc-gotview7135
+      - rc-hauppauge
+      - rc-hisi-poplar
+      - rc-hisi-tv-demo
+      - rc-imon-mce
+      - rc-imon-pad
+      - rc-imon-rsc
+      - rc-iodata-bctv7e
+      - rc-it913x-v1
+      - rc-it913x-v2
+      - rc-kaiomy
+      - rc-khadas
+      - rc-khamsin
+      - rc-kworld-315u
+      - rc-kworld-pc150u
+      - rc-kworld-plus-tv-analog
+      - rc-leadtek-y04g0051
+      - rc-lme2510
+      - rc-manli
+      - rc-mecool-kii-pro
+      - rc-mecool-kiii-pro
+      - rc-medion-x10
+      - rc-medion-x10-digitainer
+      - rc-medion-x10-or2x
+      - rc-minix-neo
+      - rc-msi-digivox-ii
+      - rc-msi-digivox-iii
+      - rc-msi-tvanywhere
+      - rc-msi-tvanywhere-plus
+      - rc-nebula
+      - rc-nec-terratec-cinergy-xs
+      - rc-norwood
+      - rc-npgtech
+      - rc-odroid
+      - rc-pctv-sedna
+      - rc-pine64
+      - rc-pinnacle-color
+      - rc-pinnacle-grey
+      - rc-pinnacle-pctv-hd
+      - rc-pixelview
+      - rc-pixelview-002t
+      - rc-pixelview-mk12
+      - rc-pixelview-new
+      - rc-powercolor-real-angel
+      - rc-proteus-2309
+      - rc-purpletv
+      - rc-pv951
+      - rc-rc5-tv
+      - rc-rc6-mce
+      - rc-real-audio-220-32-keys
+      - rc-reddo
+      - rc-snapstream-firefly
+      - rc-streamzap
+      - rc-su3000
+      - rc-tanix-tx3mini
+      - rc-tanix-tx5max
+      - rc-tbs-nec
+      - rc-technisat-ts35
+      - rc-technisat-usb2
+      - rc-terratec-cinergy-c-pci
+      - rc-terratec-cinergy-s2-hd
+      - rc-terratec-cinergy-xs
+      - rc-terratec-slim
+      - rc-terratec-slim-2
+      - rc-tevii-nec
+      - rc-tivo
+      - rc-total-media-in-hand
+      - rc-total-media-in-hand-02
+      - rc-trekstor
+      - rc-tt-1500
+      - rc-twinhan-dtv-cab-ci
+      - rc-twinhan1027
+      - rc-videomate-k100
+      - rc-videomate-s350
+      - rc-videomate-tv-pvr
+      - rc-videostrong-kii-pro
+      - rc-vega-s9x
+      - rc-wetek-hub
+      - rc-wetek-play2
+      - rc-winfast
+      - rc-winfast-usbii-deluxe
+      - rc-x96max
+      - rc-xbox-360
+      - rc-xbox-dvd
+      - rc-zx-irdec
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
new file mode 100644
index 0000000000..d527fc42c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,ceu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Capture Engine Unit (CEU)
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - linux-renesas-soc@vger.kernel.org
+
+description: |+
+  The Capture Engine Unit is the image capture interface found in the Renesas SH
+  Mobile, R-Mobile and RZ SoCs. The interface supports a single parallel input
+  with data bus width of 8 or 16 bits.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s72100-ceu
+      - renesas,r8a7740-ceu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active: true
+          vsync-active: true
+          field-even-active: false
+          bus-width:
+            enum: [8, 16]
+            default: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r7s72100-clock.h>
+
+    ceu: ceu@e8210000 {
+        reg = <0xe8210000 0x209c>;
+        compatible = "renesas,r7s72100-ceu";
+        interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp6_clks R7S72100_CLK_CEU>;
+        power-domains = <&cpg_clocks>;
+
+        port {
+            ceu_in: endpoint {
+                remote-endpoint = <&ov7670_out>;
+                hsync-active = <1>;
+                vsync-active = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
new file mode 100644
index 0000000000..977ab188d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI CSI-2 receiver
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
+  Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the
+  R-Car VIN module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-csi2 # RZ/G2M
+          - renesas,r8a774b1-csi2 # RZ/G2N
+          - renesas,r8a774c0-csi2 # RZ/G2E
+          - renesas,r8a774e1-csi2 # RZ/G2H
+          - renesas,r8a7795-csi2  # R-Car H3
+          - renesas,r8a7796-csi2  # R-Car M3-W
+          - renesas,r8a77961-csi2 # R-Car M3-W+
+          - renesas,r8a77965-csi2 # R-Car M3-N
+          - renesas,r8a77970-csi2 # R-Car V3M
+          - renesas,r8a77980-csi2 # R-Car V3H
+          - renesas,r8a77990-csi2 # R-Car E3
+          - renesas,r8a779a0-csi2 # R-Car V3U
+          - renesas,r8a779g0-csi2 # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node, multiple endpoints describing all the R-Car VIN
+          modules connected the CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7796-sysc.h>
+
+    csi20: csi2@fea80000 {
+            compatible = "renesas,r8a7796-csi2";
+            reg = <0xfea80000 0x10000>;
+            interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 714>;
+            power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+            resets = <&cpg 714>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            csi20_in: endpoint {
+                                    clock-lanes = <0>;
+                                    data-lanes = <1>;
+                                    remote-endpoint = <&adv7482_txb>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            csi20vin0: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint = <&vin0csi20>;
+                            };
+                            csi20vin1: endpoint@1 {
+                                    reg = <1>;
+                                    remote-endpoint = <&vin1csi20>;
+                            };
+                            csi20vin2: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&vin2csi20>;
+                            };
+                            csi20vin3: endpoint@3 {
+                                    reg = <3>;
+                                    remote-endpoint = <&vin3csi20>;
+                            };
+                            csi20vin4: endpoint@4 {
+                                    reg = <4>;
+                                    remote-endpoint = <&vin4csi20>;
+                            };
+                            csi20vin5: endpoint@5 {
+                                    reg = <5>;
+                                    remote-endpoint = <&vin5csi20>;
+                            };
+                            csi20vin6: endpoint@6 {
+                                    reg = <6>;
+                                    remote-endpoint = <&vin6csi20>;
+                            };
+                            csi20vin7: endpoint@7 {
+                                    reg = <7>;
+                                    remote-endpoint = <&vin7csi20>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
new file mode 100644
index 0000000000..9403b235e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF)
+
+maintainers:
+  - Ramesh Shanmugasundaram <rashanmu@gmail.com>
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+description: |
+  R-Car Gen3 DRIF is a SPI like receive only slave device. A general
+  representation of DRIF interfacing with a master device is shown below.
+
+  +---------------------+                +---------------------+
+  |                     |-----SCK------->|CLK                  |
+  |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  |                     |-----SD0------->|D0                   |
+  |                     |-----SD1------->|D1                   |
+  +---------------------+                +---------------------+
+
+  As per datasheet, each DRIF channel (drifn) is made up of two internal
+  channels (drifn0 & drifn1). These two internal channels share the common
+  CLK & SYNC. Each internal channel has its own dedicated resources like
+  irq, dma channels, address space & clock. This internal split is not
+  visible to the external master device.
+
+  The device tree model represents each internal channel as a separate node.
+  The internal channels sharing the CLK & SYNC are tied together by their
+  phandles using a property called "renesas,bonding". For the rest of
+  the documentation, unless explicitly stated, the word channel implies an
+  internal channel.
+
+  When both internal channels are enabled they need to be managed together
+  as one (i.e.) they cannot operate alone as independent devices. Out of the
+  two, one of them needs to act as a primary device that accepts common
+  properties of both the internal channels. This channel is identified by a
+  property called "renesas,primary-bond".
+
+  To summarize,
+     * When both the internal channels that are bonded together are enabled,
+       the zeroth channel is selected as primary-bond. This channels accepts
+       properties common to all the members of the bond.
+     * When only one of the bonded channels need to be enabled, the property
+       "renesas,bonding" or "renesas,primary-bond" will have no effect. That
+       enabled channel can act alone as any other independent device.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-drif        # R-Car H3
+          - renesas,r8a7796-drif        # R-Car M3-W
+          - renesas,r8a77965-drif       # R-Car M3-N
+          - renesas,r8a77990-drif       # R-Car E3
+      - const: renesas,rcar-gen3-drif   # Generic R-Car Gen3 compatible device
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: rx
+
+  renesas,bonding:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the other internal channel of DRIF
+
+  power-domains:
+    maxItems: 1
+
+  renesas,primary-bond:
+    type: boolean
+    description:
+      Indicates that the channel acts as primary among the bonded channels.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Child port node corresponding to the data input. The port node must
+      contain at least one endpoint.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          sync-active:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1]
+            description:
+              Indicates sync signal polarity, 0/1 for low/high respectively.
+              This property maps to SYNCAC bit in the hardware manual. The
+              default is 1 (active high).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - renesas,bonding
+  - power-domains
+
+allOf:
+  - if:
+      required:
+        - renesas,primary-bond
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+        - port
+
+  - if:
+      required:
+        - port
+    then:
+      required:
+        - pinctrl-0
+        - pinctrl-names
+    else:
+      properties:
+        pinctrl-0: false
+        pinctrl-names: false
+
+additionalProperties: false
+
+examples:
+  # Example with both internal channels enabled.
+  #
+  # When interfacing with a third party tuner device with two data pins as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |-----SD0------->|D0                   |
+  # |                     |-----SD1------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif00: rif@e6f40000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f40000 0 0x64>;
+                    interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 515>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif01>;
+                    resets = <&cpg 515>;
+                    renesas,primary-bond;
+                    pinctrl-0 = <&drif0_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif0_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep>;
+                            };
+                    };
+            };
+
+            drif01: rif@e6f50000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f50000 0 0x64>;
+                    interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 514>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    renesas,bonding = <&drif00>;
+                    resets = <&cpg 514>;
+            };
+    };
+
+  # Example with internal channel 1 alone enabled.
+  #
+  # When interfacing with a third party tuner device with one data pin as shown
+  # below.
+  #
+  # +---------------------+                +---------------------+
+  # |                     |-----SCK------->|CLK                  |
+  # |       Master        |-----SS-------->|SYNC  DRIFn (slave)  |
+  # |                     |                |D0 (unused)          |
+  # |                     |-----SD-------->|D1                   |
+  # +---------------------+                +---------------------+
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            drif10: rif@e6f60000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f60000 0 0x64>;
+                    interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 513>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 513>;
+                    renesas,bonding = <&drif11>;
+            };
+
+            drif11: rif@e6f70000 {
+                    compatible = "renesas,r8a7795-drif",
+                                 "renesas,rcar-gen3-drif";
+                    reg = <0 0xe6f70000 0 0x64>;
+                    interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+                    clocks = <&cpg CPG_MOD 512>;
+                    clock-names = "fck";
+                    dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+                    dma-names = "rx", "rx";
+                    power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                    resets = <&cpg 512>;
+                    renesas,bonding = <&drif10>;
+                    pinctrl-0 = <&drif1_pins>;
+                    pinctrl-names = "default";
+                    port {
+                            drif1_ep: endpoint {
+                                 remote-endpoint = <&tuner_ep1>;
+                                 sync-active = <0>;
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
new file mode 100644
index 0000000000..c6abe71988
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,fcp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Frame Compression Processor (FCP)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The FCP is a companion module of video processing modules in the Renesas
+  R-Car Gen3 and RZ/G2 SoCs. It provides data compression and decompression,
+  data caching, and conversion of AXI transactions in order to reduce the
+  memory bandwidth.
+
+  There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and
+  FCP for FDP (FCPF). Their configuration and behaviour depend on the module
+  they are paired with. These DT bindings currently support the FCPV and FCPF.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,fcpv # FCP for VSP
+          - renesas,fcpf # FCP for FDP
+      - items:
+          - enum:
+              - renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
+              - renesas,r9a07g054-fcpvd # RZ/V2L
+          - const: renesas,fcpv         # Generic FCP for VSP fallback
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-fcpvd
+              - renesas,r9a07g054-fcpvd
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Video clock
+        clock-names:
+          items:
+            - const: aclk
+            - const: pclk
+            - const: vclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+examples:
+  # R8A7795 (R-Car H3) FCP for VSP-D1
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    fcp@fea2f000 {
+        compatible = "renesas,fcpv";
+        reg = <0xfea2f000 0x200>;
+        clocks = <&cpg CPG_MOD 602>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 602>;
+        iommus = <&ipmmu_vi0 9>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.yaml b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml
new file mode 100644
index 0000000000..2a27a7296f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,fdp1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Fine Display Processor (FDP1)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The FDP1 is a de-interlacing module which converts interlaced video to
+  progressive video. It is capable of performing pixel format conversion
+  between YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are
+  supported as an input to the module.
+
+properties:
+  compatible:
+    enum:
+      - renesas,fdp1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,fcp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the FCP that handles memory accesses for the FDP1.
+      Not allowed on R-Car Gen2, mandatory on R-Car Gen3.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    fdp1@fe940000 {
+        compatible = "renesas,fdp1";
+        reg = <0xfe940000 0x2400>;
+        interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 119>;
+        power-domains = <&sysc R8A7795_PD_A3VP>;
+        resets = <&cpg 119>;
+        renesas,fcp = <&fcpf0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,imr.yaml b/Documentation/devicetree/bindings/media/renesas,imr.yaml
new file mode 100644
index 0000000000..512f57417f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,imr.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,imr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Image Renderer (Distortion Correction Engine)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  The image renderer, or the distortion correction engine, is a drawing
+  processor with a simple instruction system capable of referencing video
+  capture data or data in an external memory as 2D texture data and performing
+  texture mapping and drawing with respect to any shape that is split into
+  triangular objects.
+
+  The image renderer light extended 4 (IMR-LX4) is found in R-Car Gen3 SoCs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-imr-lx4 # R-Car H3
+          - renesas,r8a7796-imr-lx4 # R-Car M3-W
+      - const: renesas,imr-lx4      # R-Car Gen3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    imr-lx4@fe860000 {
+            compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4";
+            reg = <0xfe860000 0x2000>;
+            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 823>;
+            power-domains = <&sysc R8A7795_PD_A3VC>;
+            resets = <&cpg 823>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml
new file mode 100644
index 0000000000..33650a1ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car ISP Channel Selector
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car ISP Channel Selector provides MIPI CSI-2 VC and DT filtering
+  capabilities for the Renesas R-Car family of devices. It is used in
+  conjunction with the R-Car VIN and CSI-2 modules, which provides the video
+  capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a779a0-isp # V3U
+          - renesas,r8a779g0-isp # V4H
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, multiple endpoints describing the connected R-Car
+          CSI-2 receivers.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 0.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 1.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 2.
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 3.
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 4.
+
+      port@6:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 5.
+
+      port@7:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 6.
+
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Single endpoint describing the R-Car VIN connected to output port 7.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+      - port@6
+      - port@7
+      - port@8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    isp1: isp@fed20000 {
+            compatible = "renesas,r8a779a0-isp";
+            reg = <0xfed20000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 613>;
+            power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+            resets = <&cpg 613>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <0>;
+                            isp1csi41: endpoint@1 {
+                                    reg = <1>;
+                                    remote-endpoint = <&csi41isp1>;
+                            };
+                    };
+
+                    port@1 {
+                            reg = <1>;
+                            isp1vin08: endpoint {
+                                    remote-endpoint = <&vin08isp1>;
+                            };
+                    };
+
+                    port@2 {
+                            reg = <2>;
+                            isp1vin09: endpoint {
+                                    remote-endpoint = <&vin09isp1>;
+                            };
+                    };
+
+                    port@3 {
+                            reg = <3>;
+                            isp1vin10: endpoint {
+                                    remote-endpoint = <&vin10isp1>;
+                            };
+                    };
+
+                    port@4 {
+                            reg = <4>;
+                            isp1vin11: endpoint {
+                                    remote-endpoint = <&vin11isp1>;
+                            };
+                    };
+
+                    port@5 {
+                            reg = <5>;
+                            isp1vin12: endpoint {
+                                    remote-endpoint = <&vin12isp1>;
+                            };
+                    };
+
+                    port@6 {
+                            reg = <6>;
+                            isp1vin13: endpoint {
+                                    remote-endpoint = <&vin13isp1>;
+                            };
+                    };
+
+                    port@7 {
+                            reg = <7>;
+                            isp1vin14: endpoint {
+                                    remote-endpoint = <&vin14isp1>;
+                            };
+                    };
+
+                    port@8 {
+                            reg = <8>;
+                            isp1vin15: endpoint {
+                                    remote-endpoint = <&vin15isp1>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.yaml b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
new file mode 100644
index 0000000000..2f55968e86
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,jpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas JPEG Processing Unit
+
+maintainers:
+  - Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
+
+description:
+  The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
+  and decoding function conforming to the JPEG baseline process, so that the
+  JPU can encode image data and decode JPEG data quickly.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,jpu-r8a7790      # R-Car H2
+          - renesas,jpu-r8a7791      # R-Car M2-W
+          - renesas,jpu-r8a7792      # R-Car V2H
+          - renesas,jpu-r8a7793      # R-Car M2-N
+      - const: renesas,rcar-gen2-jpu # R-Car Gen2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    jpeg-codec@fe980000 {
+            compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
+            reg = <0xfe980000 0x10300>;
+            interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 106>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 106>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 0000000000..1e72b8808d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CRU image processing module is a data conversion module equipped with pixel
+  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
+  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-cru       # RZ/G2{L,LC}
+          - renesas,r9a07g054-cru       # RZ/V2L
+      - const: renesas,rzg2l-cru
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: image_conv
+      - const: image_conv_err
+      - const: axi_mst_err
+
+  clocks:
+    items:
+      - description: CRU Main clock
+      - description: CRU Register access clock
+      - description: CRU image transfer clock
+
+  clock-names:
+    items:
+      - const: video
+      - const: apb
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_ARESETN reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: aresetn
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-width: true
+              data-shift: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, describing the Image Processing module connected to the
+          CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example with CSI-2
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cru: video@10830000 {
+        compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+        reg = <0x10830000 0x400>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+        clock-names = "video", "apb", "axi";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_ARESETN>;
+        reset-names = "presetn", "aresetn";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                cru_parallel_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&ov5642>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                cru_csi_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&csi_cru_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
new file mode 100644
index 0000000000..67eea2ac1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
+  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
+  with the Image Processing module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
+          - renesas,r9a07g054-csi2       # RZ/V2L
+      - const: renesas,rzg2l-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Internal clock for connecting CRU and MIPI
+      - description: CRU Main clock
+      - description: CRU Register access clock
+
+  clock-names:
+    items:
+      - const: system
+      - const: video
+      - const: apb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_CMN_RSTB reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: cmn-rstb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node, Image Processing block connected to the CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csi: csi@10830400 {
+        compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+        reg = <0x10830400 0xfc00>;
+        interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+        clock-names = "system", "video", "apb";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_CMN_RSTB>;
+        reset-names = "presetn", "cmn-rstb";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                csi2_in: endpoint {
+                    clock-lanes = <0>;
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&ov5645_ep>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                reg = <1>;
+
+                csi2cru: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&crucsi2>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
new file mode 100644
index 0000000000..5539d0f8e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -0,0 +1,357 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,vin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Video Input (VIN)
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car Video Input (VIN) device provides video input capabilities for the
+  Renesas R-Car family of devices.
+
+  Each VIN instance has a single parallel input that supports RGB and YUV video,
+  with both external synchronization and BT.656 synchronization for the latter.
+  Depending on the instance the VIN input is connected to external SoC pins, or
+  on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,vin-r8a7742  # RZ/G1H
+              - renesas,vin-r8a7743  # RZ/G1M
+              - renesas,vin-r8a7744  # RZ/G1N
+              - renesas,vin-r8a7745  # RZ/G1E
+              - renesas,vin-r8a77470 # RZ/G1C
+              - renesas,vin-r8a7790  # R-Car H2
+              - renesas,vin-r8a7791  # R-Car M2-W
+              - renesas,vin-r8a7792  # R-Car V2H
+              - renesas,vin-r8a7793  # R-Car M2-N
+              - renesas,vin-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1
+
+      - items:
+          - enum:
+              - renesas,vin-r8a774a1 # RZ/G2M
+              - renesas,vin-r8a774b1 # RZ/G2N
+              - renesas,vin-r8a774c0 # RZ/G2E
+              - renesas,vin-r8a774e1 # RZ/G2H
+              - renesas,vin-r8a7778  # R-Car M1
+              - renesas,vin-r8a7779  # R-Car H1
+              - renesas,vin-r8a7795  # R-Car H3
+              - renesas,vin-r8a7796  # R-Car M3-W
+              - renesas,vin-r8a77961 # R-Car M3-W+
+              - renesas,vin-r8a77965 # R-Car M3-N
+              - renesas,vin-r8a77970 # R-Car V3M
+              - renesas,vin-r8a77980 # R-Car V3H
+              - renesas,vin-r8a77990 # R-Car E3
+              - renesas,vin-r8a77995 # R-Car D3
+              - renesas,vin-r8a779a0 # R-Car V3U
+              - renesas,vin-r8a779g0 # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  # The per-board settings for Gen2 and RZ/G1 platforms:
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      A node containing a parallel input
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          hsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          vsync-active:
+            description:
+              If both HSYNC and VSYNC polarities are not specified, embedded
+              synchronization is selected.
+            default: 1
+
+          field-even-active: true
+
+          bus-width: true
+
+          data-shift: true
+
+          data-enable-active:
+            description: Polarity of CLKENB signal
+            default: 1
+
+          pclk-sample: true
+
+          data-active: true
+
+  # The per-board settings for Gen3 and RZ/G2 platforms:
+  renesas,id:
+    description: VIN channel number
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              vsync-active:
+                description:
+                  If both HSYNC and VSYNC polarities are not specified, embedded
+                  synchronization is selected.
+                default: 1
+
+              field-even-active: true
+
+              bus-width: true
+
+              data-shift: true
+
+              data-enable-active:
+                description: Polarity of CLKENB signal
+                default: 1
+
+              pclk-sample: true
+
+              data-active: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, multiple endpoints describing all the R-Car CSI-2
+          modules connected the VIN.
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI20.
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI21.
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI40.
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to CSI41.
+
+        anyOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+          - required:
+              - endpoint@2
+          - required:
+              - endpoint@3
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, multiple endpoints describing all the R-Car ISP
+          modules connected the VIN.
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP0.
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP1.
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP2.
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Endpoint connected to ISP3.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,vin-r8a7778
+                - renesas,vin-r8a7779
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,vin-r8a7778
+              - renesas,vin-r8a7779
+              - renesas,rcar-gen2-vin
+    then:
+      required:
+        - port
+    else:
+      required:
+        - renesas,id
+        - ports
+
+additionalProperties: false
+
+examples:
+  # Device node example for Gen2 platform
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    vin1: vin@e6ef1000 {
+            compatible = "renesas,vin-r8a7790",
+                         "renesas,rcar-gen2-vin";
+            reg = <0xe6ef1000 0x1000>;
+            interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 810>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 810>;
+
+            port {
+                    vin1ep0: endpoint {
+                            remote-endpoint = <&adv7180>;
+                            bus-width = <8>;
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with only CSI-2
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    vin0: video@e6ef0000 {
+            compatible = "renesas,vin-r8a7795";
+            reg = <0xe6ef0000 0x1000>;
+            interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 811>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 811>;
+            renesas,id = <0>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin0csi20: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint = <&csi20vin0>;
+                            };
+                            vin0csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&csi40vin0>;
+                            };
+                    };
+            };
+    };
+
+  # Device node example for Gen3 platform with CSI-2 and parallel
+  - |
+    #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a77970-sysc.h>
+
+    vin2: video@e6ef2000 {
+            compatible = "renesas,vin-r8a77970";
+            reg = <0xe6ef2000 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 809>;
+            power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+            resets = <&cpg 809>;
+            renesas,id = <2>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            vin2_in: endpoint {
+                                    remote-endpoint = <&adv7612_out>;
+                                    hsync-active = <0>;
+                                    vsync-active = <0>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            vin2csi40: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&csi40vin2>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
new file mode 100644
index 0000000000..3265e92264
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,vsp1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas VSP Video Processing Engine
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The VSP is a video processing engine that supports up-/down-scaling, alpha
+  blending, color space conversion and various other image processing features.
+  It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-vsp2 # RZ/G2L
+          - renesas,vsp1 # R-Car Gen2 and RZ/G1
+          - renesas,vsp2 # R-Car Gen3 and RZ/G2
+      - items:
+          - enum:
+              - renesas,r9a07g054-vsp2    # RZ/V2L
+          - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+  clock-names: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,fcp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the FCP that handles memory accesses for the VSP.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,vsp1
+    then:
+      properties:
+        renesas,fcp: false
+    else:
+      required:
+        - renesas,fcp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-vsp2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Video clock
+        clock-names:
+          items:
+            - const: aclk
+            - const: pclk
+            - const: vclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+examples:
+  # R8A7790 (R-Car H2) VSP1-S
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    vsp@fe928000 {
+        compatible = "renesas,vsp1";
+        reg = <0xfe928000 0x8000>;
+        interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 131>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 131>;
+    };
+
+  # R8A77951 (R-Car H3) VSP2-BC
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    vsp@fe920000 {
+        compatible = "renesas,vsp2";
+        reg = <0xfe920000 0x8000>;
+        interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 624>;
+        power-domains = <&sysc R8A7795_PD_A3VP>;
+        resets = <&cpg 624>;
+
+        renesas,fcp = <&fcpvb1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
new file mode 100644
index 0000000000..9d90d8d056
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G1 VPU encoders implemented on Rockchip SoCs
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+description:
+  Hantro G1 video encode-only accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-vepu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3568-power.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vepu: video-codec@fdee0000 {
+            compatible = "rockchip,rk3568-vepu";
+            reg = <0x0 0xfdee0000 0x0 0x800>;
+            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+            clock-names = "aclk", "hclk";
+            iommus = <&vepu_mmu>;
+            power-domains = <&power RK3568_PD_RGA>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
new file mode 100644
index 0000000000..08b02ec167
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Video Decoder (VDec)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |-
+  The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264,
+  HEVC an VP9 streams.
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3399-vdec
+      - items:
+          - enum:
+              - rockchip,rk3228-vdec
+              - rockchip,rk3328-vdec
+          - const: rockchip,rk3399-vdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The Video Decoder AXI interface clock
+      - description: The Video Decoder AHB interface clock
+      - description: The Video Decoded CABAC clock
+      - description: The Video Decoder core clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: cabac
+      - const: core
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    vdec: video-codec@ff660000 {
+        compatible = "rockchip,rk3399-vdec";
+        reg = <0xff660000 0x400>;
+        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+                 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+        clock-names = "axi", "ahb", "cabac", "core";
+        power-domains = <&power RK3399_PD_VDU>;
+        iommus = <&vdec_mmu>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
new file mode 100644
index 0000000000..afcaa427d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -0,0 +1,295 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip-isp1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Image Signal Processing unit v1
+
+maintainers:
+  - Helen Koike <helen.koike@collabora.com>
+
+description: |
+  Rockchip ISP1 is the Camera interface for the Rockchip series of SoCs
+  which contains image processing, scaling, and compression functions.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cif-isp
+      - rockchip,rk3399-cif-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: isp
+      - const: mi
+      - const: mipi
+
+  clocks:
+    minItems: 3
+    items:
+      # isp0 and isp1
+      - description: ISP clock
+      - description: ISP AXI clock
+      - description: ISP AHB clock
+      # only for isp1
+      - description: ISP Pixel clock
+
+  clock-names:
+    minItems: 3
+    items:
+      # isp0 and isp1
+      - const: isp
+      - const: aclk
+      - const: hclk
+      # only for isp1
+      - const: pclk
+
+  iommus:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description: phandle for the PHY port
+
+  phy-names:
+    const: dphy
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for sensors at MIPI-DPHY RX0
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for input on the parallel interface
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - phys
+  - phy-names
+  - power-domains
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-cif-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          minItems: 3
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cif-isp
+    then:
+      required:
+        - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    parent0: parent {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp0: isp0@ff910000 {
+            compatible = "rockchip,rk3399-cif-isp";
+            reg = <0x0 0xff910000 0x0 0x4000>;
+            interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&cru SCLK_ISP0>,
+                     <&cru ACLK_ISP0_WRAPPER>,
+                     <&cru HCLK_ISP0_WRAPPER>;
+            clock-names = "isp", "aclk", "hclk";
+            iommus = <&isp0_mmu>;
+            phys = <&dphy>;
+            phy-names = "dphy";
+            power-domains = <&power RK3399_PD_ISP0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    mipi_in_wcam: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&wcam_out>;
+                        data-lanes = <1 2>;
+                    };
+
+                    mipi_in_ucam: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&ucam_out>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+
+        i2c7: i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            wcam: camera@36 {
+                compatible = "ovti,ov5695";
+                reg = <0x36>;
+                clocks = <&cru SCLK_TESTCLKOUT1>;
+
+                port {
+                    wcam_out: endpoint {
+                        remote-endpoint = <&mipi_in_wcam>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+
+            ucam: camera@3c {
+                compatible = "ovti,ov2685";
+                reg = <0x3c>;
+
+                clocks = <&cru SCLK_TESTCLKOUT1>;
+                clock-names = "xvclk";
+
+                avdd-supply = <&pp2800_cam>;
+                dovdd-supply = <&pp1800>;
+                dvdd-supply = <&pp1800>;
+
+                port {
+                    ucam_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+    };
+
+  - |
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    parent1: parent {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp: isp@ff4a0000 {
+            compatible = "rockchip,px30-cif-isp";
+            reg = <0x0 0xff4a0000 0x0 0x8000>;
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "isp", "mi", "mipi";
+            clocks = <&cru SCLK_ISP0>,
+                     <&cru ACLK_ISP0_WRAPPER>,
+                     <&cru HCLK_ISP0_WRAPPER>,
+                     <&cru PCLK_ISP1_WRAPPER>;
+            clock-names = "isp", "aclk", "hclk", "pclk";
+            iommus = <&isp_mmu>;
+            phys = <&csi_dphy>;
+            phy-names = "dphy";
+            power-domains = <&power PX30_PD_VI>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    mipi_in_ucam1: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&ucam1_out>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+
+        i2c2: i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ov5695: camera@36 {
+                compatible = "ovti,ov5647";
+                reg = <0x36>;
+                clocks = <&cru SCLK_CIF_OUT>;
+
+                port {
+                    ucam1_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam1>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
new file mode 100644
index 0000000000..ea23422224
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip-rga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip 2D raster graphic acceleration controller (RGA)
+
+description:
+  RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D
+  graphics operations, such as point/line drawing, image scaling, rotation,
+  BitBLT, alpha blending and image blur/sharpness.
+
+maintainers:
+  - Jacob Chen <jacob-chen@iotwrt.com>
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3288-rga
+      - const: rockchip,rk3399-rga
+      - items:
+          - enum:
+              - rockchip,rk3228-rga
+              - rockchip,rk3568-rga
+          - const: rockchip,rk3288-rga
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: sclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: core
+      - const: axi
+      - const: ahb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    rga: rga@ff680000 {
+      compatible = "rockchip,rk3399-rga";
+      reg = <0xff680000 0x10000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_RGA>,
+               <&cru HCLK_RGA>,
+               <&cru SCLK_RGA_CORE>;
+      clock-names = "aclk", "hclk", "sclk";
+      power-domains = <&power RK3399_PD_RGA>;
+      resets = <&cru SRST_RGA_CORE>,
+               <&cru SRST_A_RGA>,
+               <&cru SRST_H_RGA>;
+      reset-names = "core", "axi", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
new file mode 100644
index 0000000000..772ec3283b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G1 VPU codecs implemented on Rockchip SoCs
+
+maintainers:
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+description:
+  Hantro G1 video encode and decode accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - rockchip,rk3036-vpu
+          - rockchip,rk3066-vpu
+          - rockchip,rk3288-vpu
+          - rockchip,rk3328-vpu
+          - rockchip,rk3399-vpu
+          - rockchip,px30-vpu
+          - rockchip,rk3568-vpu
+          - rockchip,rk3588-av1-vpu
+      - items:
+          - const: rockchip,rk3188-vpu
+          - const: rockchip,rk3066-vpu
+      - items:
+          - const: rockchip,rk3228-vpu
+          - const: rockchip,rk3399-vpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    oneOf:
+      - const: vdpu
+      - items:
+          - const: vepu
+          - const: vdpu
+
+  clocks:
+    oneOf:
+      - maxItems: 2
+      - maxItems: 4
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: aclk
+          - const: hclk
+      - items:
+          - const: aclk_vdpu
+          - const: hclk_vdpu
+          - const: aclk_vepu
+          - const: hclk_vepu
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3288-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3288-power.h>
+
+        vpu: video-codec@ff9a0000 {
+                compatible = "rockchip,rk3288-vpu";
+                reg = <0xff9a0000 0x800>;
+                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "vepu", "vdpu";
+                clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+                clock-names = "aclk", "hclk";
+                power-domains = <&power RK3288_PD_VIDEO>;
+                iommus = <&vpu_mmu>;
+        };
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
new file mode 100644
index 0000000000..dd6cc7ac1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-csis
+      - samsung,exynos4210-csis
+      - samsung,exynos4212-csis
+      - samsung,exynos5250-csis
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4]
+    description:
+      Number of data lines supported.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: csis
+      - const: sclk_csis
+
+  clock-frequency:
+    default: 166000000
+    description:
+      The IP's main (system bus) clock frequency in Hz.
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: csis
+
+  power-domains:
+    maxItems: 1
+
+  vddio-supply:
+    description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V).
+
+  vddcore-supply:
+    description: MIPI CSIS Core voltage supply (e.g. 1.1V).
+
+patternProperties:
+  "^port@[34]$":
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Camera input port.
+
+    properties:
+      reg:
+        enum: [3, 4]
+
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+          samsung,csis-hs-settle:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Differential receiver (HS-RX) settle time.
+
+          samsung,csis-wclk:
+            type: boolean
+            description:
+              CSI-2 wrapper clock selection. If this property is present external clock
+              from CMU will be used, or the bus clock if it's not specified.
+
+        required:
+          - data-lanes
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - bus-width
+  - clocks
+  - clock-names
+  - interrupts
+  - vddio-supply
+  - vddcore-supply
+
+anyOf:
+  - required:
+      - port@3
+  - required:
+      - port@4
+
+allOf:
+  - if:
+      required:
+        - samsung,isp-wb
+    then:
+      required:
+        - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csis@11890000 {
+        compatible = "samsung,exynos4210-csis";
+        reg = <0x11890000 0x4000>;
+        clocks = <&clock CLK_CSIS1>,
+                 <&clock CLK_SCLK_CSIS1>;
+        clock-names = "csis", "sclk_csis";
+        assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+                          <&clock CLK_SCLK_CSIS1>;
+        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+        assigned-clock-rates = <0>, <176000000>;
+
+        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-width = <2>;
+        power-domains = <&pd_cam>;
+        phys = <&mipi_phy 2>;
+        phy-names = "csis";
+
+        vddcore-supply = <&ldo8_reg>;
+        vddio-supply = <&ldo10_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Camera D (4) MIPI CSI-2 (CSIS1) */
+        port@4 {
+            reg = <4>;
+
+            endpoint {
+                remote-endpoint = <&is_s5k6a3_ep>;
+                data-lanes = <1>;
+                samsung,csis-hs-settle = <18>;
+                samsung,csis-wclk;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
new file mode 100644
index 0000000000..271d0577a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  Each FIMC device should have an alias in the aliases node, in the form of
+  fimc<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-fimc
+      - samsung,exynos4212-fimc
+      - samsung,s5pv210-fimc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fimc
+      - const: sclk_fimc
+
+  clock-frequency:
+    description:
+      Maximum FIMC local clock (LCLK) frequency.
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  samsung,cam-if:
+    type: boolean
+    description:
+      The FIMC IP block includes the camera input interface.
+
+  samsung,isp-wb:
+    type: boolean
+    description: |
+      The FIMC IP block has the ISP writeback input.
+
+  samsung,lcd-wb:
+    type: boolean
+    description: |
+      The FIMC IP block has the LCD writeback input.
+
+  samsung,mainscaler-ext:
+    type: boolean
+    description:
+      FIMC IP supports extended image size and has CIEXTEN register.
+
+  samsung,min-pix-alignment:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Minimum supported image height alignment.
+      - description: Horizontal image offset.
+    description:
+      The values are in pixels and default is <2 1>.
+
+  samsung,min-pix-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description: |
+      An array specyfing minimum image size in pixels at the FIMC input and
+      output DMA, in the first and second cell respectively.  Default value
+      is <16 16>.
+
+  samsung,pix-limits:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 4
+    description: |
+      An array of maximum supported image sizes in pixels, for details refer to
+      Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as
+      follows:
+       0 - scaler input horizontal size
+       1 - input horizontal size for the scaler bypassed
+       2 - REAL_WIDTH without input rotation
+       3 - REAL_HEIGHT with input rotation
+
+  samsung,rotators:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x11
+    description: |
+      A bitmask specifying whether this IP has the input and the output
+      rotator. Bits 4 and 0 correspond to input and output rotator
+      respectively. If a rotator is present its corresponding bit should be
+      set.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      System Registers (SYSREG) node.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - samsung,pix-limits
+
+allOf:
+  - if:
+      required:
+        - samsung,isp-wb
+    then:
+      required:
+        - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    fimc@11800000 {
+        compatible = "samsung,exynos4212-fimc";
+        reg = <0x11800000 0x1000>;
+        clocks = <&clock CLK_FIMC0>,
+                 <&clock CLK_SCLK_FIMC0>;
+        clock-names = "fimc", "sclk_fimc";
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&sysmmu_fimc0>;
+        power-domains = <&pd_cam>;
+        samsung,sysreg = <&sys_reg>;
+
+        samsung,pix-limits = <4224 8192 1920 4224>;
+        samsung,mainscaler-ext;
+        samsung,isp-wb;
+        samsung,cam-if;
+
+        assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+                          <&clock CLK_SCLK_FIMC0>;
+        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+        assigned-clock-rates = <0>, <176000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
new file mode 100644
index 0000000000..3691cd4962
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  The FIMC-IS is a subsystem for processing image signal from an image sensor.
+  The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+  processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+  and SPI bus controllers, PWM and ADC.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4212-fimc-is
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  clocks:
+    maxItems: 21
+
+  clock-names:
+    items:
+      - const: lite0
+      - const: lite1
+      - const: ppmuispx
+      - const: ppmuispmx
+      - const: isp
+      - const: drc
+      - const: fd
+      - const: mcuisp
+      - const: gicisp
+      - const: mcuctl_isp
+      - const: pwm_isp
+      - const: ispdiv0
+      - const: ispdiv1
+      - const: mcuispdiv0
+      - const: mcuispdiv1
+      - const: mpll
+      - const: aclk200
+      - const: aclk400mcuisp
+      - const: div_aclk200
+      - const: div_aclk400mcuisp
+      - const: uart
+
+  interrupts:
+    maxItems: 2
+
+  iommus:
+    maxItems: 4
+
+  iommu-names:
+    items:
+      - const: isp
+      - const: drc
+      - const: fd
+      - const: mcuctl
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^pmu@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Node representing the SoC's Power Management Unit (duplicated with the
+      correct PMU node in the SoC).
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+  "^i2c-isp@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+    description:
+      ISP I2C bus controller
+
+    properties:
+      compatible:
+        const: samsung,exynos4212-i2c-isp
+
+      reg:
+        maxItems: 1
+
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: i2c_isp
+
+      pinctrl-0: true
+      pinctrl-names:
+        items:
+          - const: default
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - interrupts
+  - ranges
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    fimc-is@12000000 {
+        compatible = "samsung,exynos4212-fimc-is";
+        reg = <0x12000000 0x260000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+                 <&isp_clock CLK_ISP_FIMC_LITE1>,
+                 <&isp_clock CLK_ISP_PPMUISPX>,
+                 <&isp_clock CLK_ISP_PPMUISPMX>,
+                 <&isp_clock CLK_ISP_FIMC_ISP>,
+                 <&isp_clock CLK_ISP_FIMC_DRC>,
+                 <&isp_clock CLK_ISP_FIMC_FD>,
+                 <&isp_clock CLK_ISP_MCUISP>,
+                 <&isp_clock CLK_ISP_GICISP>,
+                 <&isp_clock CLK_ISP_MCUCTL_ISP>,
+                 <&isp_clock CLK_ISP_PWM_ISP>,
+                 <&isp_clock CLK_ISP_DIV_ISP0>,
+                 <&isp_clock CLK_ISP_DIV_ISP1>,
+                 <&isp_clock CLK_ISP_DIV_MCUISP0>,
+                 <&isp_clock CLK_ISP_DIV_MCUISP1>,
+                 <&clock CLK_MOUT_MPLL_USER_T>,
+                 <&clock CLK_ACLK200>,
+                 <&clock CLK_ACLK400_MCUISP>,
+                 <&clock CLK_DIV_ACLK200>,
+                 <&clock CLK_DIV_ACLK400_MCUISP>,
+                 <&clock CLK_UART_ISP_SCLK>;
+        clock-names = "lite0", "lite1", "ppmuispx",
+                      "ppmuispmx", "isp",
+                      "drc", "fd", "mcuisp",
+                      "gicisp", "mcuctl_isp", "pwm_isp",
+                      "ispdiv0", "ispdiv1", "mcuispdiv0",
+                      "mcuispdiv1", "mpll", "aclk200",
+                      "aclk400mcuisp", "div_aclk200",
+                      "div_aclk400mcuisp", "uart";
+        iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+                 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+        iommu-names = "isp", "drc", "fd", "mcuctl";
+        power-domains = <&pd_isp>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pmu@10020000 {
+            reg = <0x10020000 0x3000>;
+        };
+
+        i2c-isp@12140000 {
+            compatible = "samsung,exynos4212-i2c-isp";
+            reg = <0x12140000 0x100>;
+            clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+            clock-names = "i2c_isp";
+            pinctrl-0 = <&fimc_is_i2c1>;
+            pinctrl-names = "default";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            image-sensor@10 {
+                compatible = "samsung,s5k6a3";
+                reg = <0x10>;
+                svdda-supply = <&cam_io_reg>;
+                svddio-supply = <&ldo19_reg>;
+                afvdd-supply = <&ldo19_reg>;
+                clock-frequency = <24000000>;
+                clocks = <&camera 1>;
+                clock-names = "extclk";
+                gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+                port {
+                    endpoint {
+                        remote-endpoint = <&csis1_ep>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
new file mode 100644
index 0000000000..f80eca0a4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-lite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series camera host interface (FIMC-LITE)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  Each FIMC device should have an alias in the aliases node, in the form of
+  fimc-lite<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4212-fimc-lite
+      - samsung,exynos5250-fimc-lite
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: flite
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fimc-lite@12390000 {
+        compatible = "samsung,exynos4212-fimc-lite";
+        reg = <0x12390000 0x1000>;
+        clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+        clock-names = "flite";
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_isp>;
+        iommus = <&sysmmu_fimc_lite0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
new file mode 100644
index 0000000000..878397830a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Seung-Woo Kim <sw0312.kim@samsung.com
+
+description:
+  G-Scaler is used for scaling and color space conversion on Samsung Exynos
+  SoCs.
+
+  Each G-Scaler node should have a numbered alias in the aliases node, in the
+  form of gscN, N = 0...3.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+          - const: samsung,exynos5-gsc
+      - enum:
+          - samsung,exynos5433-gsc
+      - const: samsung,exynos5-gsc
+        deprecated: True
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon used to control the system registers to set writeback input and destination.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-gsc
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: gscl
+    else:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: aclk_gsclbend
+            - const: gsd
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-scaler@13e00000 {
+        compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+        reg = <0x13e00000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_gsc>;
+        clocks = <&clock CLK_GSCL0>;
+        clock-names = "gscl";
+        iommus = <&sysmmu_gsc0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
new file mode 100644
index 0000000000..b3486c38a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+  represented by separate device tree nodes. Currently this includes: Fully
+  Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI
+  CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+properties:
+  compatible:
+    const: samsung,fimc
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock specifier cell stores an index of a clock: 0, 1 for
+      CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sclk_cam0
+      - const: sclk_cam1
+      - const: pxl_async0
+      - const: pxl_async1
+
+  clock-output-names:
+    maxItems: 2
+
+  parallel-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Active parallel video input ports.
+
+    patternProperties:
+      "^port@[01]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Camera A and camera B inputs.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: idle
+      - const: active_a
+      - const: active_b
+
+patternProperties:
+  "^csis@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4210-csis.yaml#
+    description: MIPI CSI-2 receiver.
+
+  "^fimc@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4210-fimc.yaml#
+    description: Fully Integrated Mobile Camera.
+
+  "^fimc-is@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4212-fimc-is.yaml#
+    description: Imaging Subsystem (FIMC-IS).
+
+  "^fimc-lite@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4212-fimc-lite.yaml#
+    description: Camera host interface (FIMC-LITE).
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - clock-output-names
+  - ranges
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    camera@11800000 {
+        compatible = "samsung,fimc";
+        #clock-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0x18000000>;
+
+        clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+                 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+        clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+        clock-output-names = "cam_a_clkout", "cam_b_clkout";
+
+        assigned-clocks = <&clock CLK_MOUT_CAM0>,
+                          <&clock CLK_MOUT_CAM1>;
+        assigned-clock-parents = <&clock CLK_XUSBXTI>,
+                                 <&clock CLK_XUSBXTI>;
+
+        pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+        pinctrl-names = "default";
+
+        fimc@11800000 {
+            compatible = "samsung,exynos4212-fimc";
+            reg = <0x11800000 0x1000>;
+            interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clock CLK_FIMC0>,
+                     <&clock CLK_SCLK_FIMC0>;
+            clock-names = "fimc", "sclk_fimc";
+            power-domains = <&pd_cam>;
+            samsung,sysreg = <&sys_reg>;
+            iommus = <&sysmmu_fimc0>;
+
+            samsung,pix-limits = <4224 8192 1920 4224>;
+            samsung,mainscaler-ext;
+            samsung,isp-wb;
+            samsung,cam-if;
+        };
+
+        /* ... FIMC 1-3 */
+
+        csis@11880000 {
+            compatible = "samsung,exynos4210-csis";
+            reg = <0x11880000 0x4000>;
+            interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clock CLK_CSIS0>,
+                     <&clock CLK_SCLK_CSIS0>;
+            clock-names = "csis", "sclk_csis";
+            assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+                              <&clock CLK_SCLK_CSIS0>;
+            assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+            assigned-clock-rates = <0>, <176000000>;
+
+            bus-width = <4>;
+            power-domains = <&pd_cam>;
+            phys = <&mipi_phy 0>;
+            phy-names = "csis";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vddcore-supply = <&ldo8_reg>;
+            vddio-supply = <&ldo10_reg>;
+
+            /* Camera C (3) MIPI CSI-2 (CSIS0) */
+            port@3 {
+                reg = <3>;
+                endpoint {
+                    remote-endpoint = <&s5c73m3_ep>;
+                    data-lanes = <1 2 3 4>;
+                    samsung,csis-hs-settle = <12>;
+                };
+            };
+        };
+
+        /* ... CSIS 1 */
+
+        fimc-lite@12390000 {
+              compatible = "samsung,exynos4212-fimc-lite";
+              reg = <0x12390000 0x1000>;
+              interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+              power-domains = <&pd_isp>;
+              clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+              clock-names = "flite";
+              iommus = <&sysmmu_fimc_lite0>;
+        };
+
+        /* ... FIMC-LITE 1 */
+
+        fimc-is@12000000 {
+            compatible = "samsung,exynos4212-fimc-is";
+            reg = <0x12000000 0x260000>;
+            interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+                     <&isp_clock CLK_ISP_FIMC_LITE1>,
+                     <&isp_clock CLK_ISP_PPMUISPX>,
+                     <&isp_clock CLK_ISP_PPMUISPMX>,
+                     <&isp_clock CLK_ISP_FIMC_ISP>,
+                     <&isp_clock CLK_ISP_FIMC_DRC>,
+                     <&isp_clock CLK_ISP_FIMC_FD>,
+                     <&isp_clock CLK_ISP_MCUISP>,
+                     <&isp_clock CLK_ISP_GICISP>,
+                     <&isp_clock CLK_ISP_MCUCTL_ISP>,
+                     <&isp_clock CLK_ISP_PWM_ISP>,
+                     <&isp_clock CLK_ISP_DIV_ISP0>,
+                     <&isp_clock CLK_ISP_DIV_ISP1>,
+                     <&isp_clock CLK_ISP_DIV_MCUISP0>,
+                     <&isp_clock CLK_ISP_DIV_MCUISP1>,
+                     <&clock CLK_MOUT_MPLL_USER_T>,
+                     <&clock CLK_ACLK200>,
+                     <&clock CLK_ACLK400_MCUISP>,
+                     <&clock CLK_DIV_ACLK200>,
+                     <&clock CLK_DIV_ACLK400_MCUISP>,
+                     <&clock CLK_UART_ISP_SCLK>;
+            clock-names = "lite0", "lite1", "ppmuispx",
+                          "ppmuispmx", "isp",
+                          "drc", "fd", "mcuisp",
+                          "gicisp", "mcuctl_isp", "pwm_isp",
+                          "ispdiv0", "ispdiv1", "mcuispdiv0",
+                          "mcuispdiv1", "mpll", "aclk200",
+                          "aclk400mcuisp", "div_aclk200",
+                          "div_aclk400mcuisp", "uart";
+            iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+                     <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+            iommu-names = "isp", "drc", "fd", "mcuctl";
+            power-domains = <&pd_isp>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            pmu@10020000 {
+                reg = <0x10020000 0x3000>;
+            };
+
+            i2c-isp@12140000 {
+                compatible = "samsung,exynos4212-i2c-isp";
+                reg = <0x12140000 0x100>;
+                clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+                clock-names = "i2c_isp";
+                pinctrl-0 = <&fimc_is_i2c1>;
+                pinctrl-names = "default";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                image-sensor@10 {
+                    compatible = "samsung,s5k6a3";
+                    reg = <0x10>;
+                    svdda-supply = <&cam_io_reg>;
+                    svddio-supply = <&ldo19_reg>;
+                    afvdd-supply = <&ldo19_reg>;
+                    clock-frequency = <24000000>;
+                    /* CAM_B_CLKOUT */
+                    clocks = <&camera 1>;
+                    clock-names = "extclk";
+                    gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+                    port {
+                        endpoint {
+                            remote-endpoint = <&csis1_ep>;
+                            data-lanes = <1>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
new file mode 100644
index 0000000000..1b75390fda
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5C73M3 8Mp camera ISP
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656)
+  video data busses. The I2C bus is the main control bus and additionally the
+  SPI bus is used, mostly for transferring the firmware to and from the
+  device. Two slave device nodes corresponding to these control bus
+  interfaces are required and should be placed under respective bus
+  controller nodes.
+
+properties:
+  compatible:
+    const: samsung,s5c73m3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cis_extclk
+
+  clock-frequency:
+    default: 24000000
+    description: cis_extclk clock frequency.
+
+  standby-gpios:
+    maxItems: 1
+    description: STANDBY pin.
+
+  vdda-supply:
+    description: Analog power supply (1.2V).
+
+  vdd-af-supply:
+    description: lens power supply (2.8V).
+
+  vddio-cis-supply:
+    description: CIS I/O power supply (1.2V to 1.8V).
+
+  vddio-host-supply:
+    description: Host I/O power supply (1.8V to 2.8V).
+
+  vdd-int-supply:
+    description: Digital power supply (1.2V).
+
+  vdd-reg-supply:
+    description: Regulator input power supply (2.8V).
+
+  xshutdown-gpios:
+    maxItems: 1
+    description: XSHUTDOWN pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - spi-max-frequency
+    then:
+      properties:
+        # The SPI node is simplified firmware-transfer interface only
+        clocks: false
+        clock-names: false
+        standby-gpios: false
+        vdda-supply: false
+        vdd-af-supply: false
+        vddio-cis-supply: false
+        vddio-host-supply: false
+        vdd-int-supply: false
+        vdd-reg-supply: false
+        xshutdown-gpios: false
+        port: false
+    else:
+      required:
+        - clocks
+        - clock-names
+        - standby-gpios
+        - vdda-supply
+        - vdd-af-supply
+        - vddio-cis-supply
+        - vddio-host-supply
+        - vdd-int-supply
+        - vdd-reg-supply
+        - xshutdown-gpios
+        - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        image-sensor@3c {
+            compatible = "samsung,s5c73m3";
+            reg = <0x3c>;
+            clock-frequency = <24000000>;
+            clocks = <&camera 0>;
+            clock-names = "cis_extclk";
+            standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;
+            vdda-supply = <&cam_vdda_reg>;
+            vdd-af-supply = <&cam_af_reg>;
+            vddio-cis-supply = <&ldo9_reg>;
+            vddio-host-supply = <&ldo18_reg>;
+            vdd-int-supply = <&buck9_reg>;
+            vdd-reg-supply = <&cam_io_reg>;
+            xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
+
+            port {
+                s5c73m3_ep: endpoint {
+                    remote-endpoint = <&csis0_ep>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+        };
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        image-sensor@0 {
+            compatible = "samsung,s5c73m3";
+            reg = <0>;
+            spi-max-frequency = <50000000>;
+            controller-data {
+                samsung,spi-feedback-delay = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
new file mode 100644
index 0000000000..084b44582a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Multi Format Codec (MFC)
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Aakarsh Jain <aakarsh.jain@samsung.com>
+
+description:
+  Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+  supports high resolution decoding and encoding functionalities.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5433-mfc        # Exynos5433
+          - samsung,mfc-v5                # Exynos4
+          - samsung,mfc-v6                # Exynos5
+          - samsung,mfc-v7                # Exynos5420
+          - samsung,mfc-v8                # Exynos5800
+          - samsung,mfc-v10               # Exynos7880
+      - items:
+          - enum:
+              - samsung,exynos3250-mfc    # Exynos3250
+          - const: samsung,mfc-v7         # Fall back for Exynos3250
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: mfc
+            - const: sclk_mfc
+        iommus:
+          maxItems: 1
+        iommus-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+        iommus:
+          maxItems: 2
+        iommus-names:
+          items:
+            - const: left
+            - const: right
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v5
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: mfc
+            - const: sclk_mfc
+        iommus:
+          maxItems: 2
+        iommus-names:
+          items:
+            - const: left
+            - const: right
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v6
+              - samsung,mfc-v8
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mfc
+        iommus:
+          maxItems: 2
+        iommus-names:
+          items:
+            - const: left
+            - const: right
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v7
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+        iommus:
+          minItems: 1
+          maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/clock/exynos-audss-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    codec@13400000 {
+        compatible = "samsung,mfc-v5";
+        reg = <0x13400000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_mfc>;
+        clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+        clock-names = "mfc", "sclk_mfc";
+        iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+        iommu-names = "left", "right";
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
new file mode 100644
index 0000000000..e28d6ec56c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5pv210-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos SoC JPEG codec
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-jpeg
+      - samsung,exynos3250-jpeg
+      - samsung,exynos4210-jpeg
+      - samsung,exynos4212-jpeg
+      - samsung,exynos5420-jpeg
+      - samsung,exynos5433-jpeg
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-jpeg
+              - samsung,exynos4210-jpeg
+              - samsung,exynos4212-jpeg
+              - samsung,exynos5420-jpeg
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: jpeg
+            - const: sclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: sclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    codec@15020000 {
+        compatible = "samsung,exynos5433-jpeg";
+        reg = <0x15020000 0x10000>;
+        interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+        clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+                 <&cmu_mscl CLK_SCLK_JPEG>;
+        iommus = <&sysmmu_jpeg>;
+        power-domains = <&pd_mscl>;
+    };
diff --git a/Documentation/devicetree/bindings/media/si4713.txt b/Documentation/devicetree/bindings/media/si4713.txt
new file mode 100644
index 0000000000..5ee5552d34
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/si4713.txt
@@ -0,0 +1,30 @@
+* Silicon Labs FM Radio transmitter
+
+The Silicon Labs Si4713 is an FM radio transmitter with receive power scan
+supporting 76-108 MHz. It includes an RDS encoder and has both, a stereo-analog
+and a digital interface, which supports I2S, left-justified and a custom
+DSP-mode format. It is programmable through an I2C interface.
+
+Required Properties:
+- compatible: Should contain "silabs,si4713"
+- reg: the I2C address of the device
+
+Optional Properties:
+- interrupts-extended: Interrupt specifier for the chips interrupt
+- reset-gpios: GPIO specifier for the chips reset line
+- vdd-supply: phandle for Vdd regulator
+- vio-supply: phandle for Vio regulator
+
+Example:
+
+&i2c2 {
+        fmtx: si4713@63 {
+                compatible = "silabs,si4713";
+                reg = <0x63>;
+
+                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+                vio-supply = <&vio>;
+                vdd-supply = <&vaux1>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/media/silabs,si470x.yaml b/Documentation/devicetree/bindings/media/silabs,si470x.yaml
new file mode 100644
index 0000000000..a3d19c562c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/silabs,si470x.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/silabs,si470x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si470x FM Radio Receiver
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+  - Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
+
+properties:
+  compatible:
+    const: silabs,si470x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fmradio@10 {
+            compatible = "silabs,si470x";
+            reg = <0x10>;
+            interrupt-parent = <&gpj2>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
new file mode 100644
index 0000000000..98a72c0b3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt
@@ -0,0 +1,18 @@
+Sony CXD2880 DVB-T2/T tuner + demodulator driver SPI adapter
+
+Required properties:
+- compatible: Should be "sony,cxd2880".
+- reg: SPI chip select number for the device.
+- spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz).
+
+Optional properties:
+- vcc-supply: Optional phandle to the vcc regulator to power the adapter,
+  as described in the file ../regulator/regulator.txt
+
+Example:
+
+cxd2880@0 {
+	compatible = "sony,cxd2880";
+	reg = <0>; /* CE0 */
+	spi-max-frequency = <55000000>; /* 55MHz */
+};
diff --git a/Documentation/devicetree/bindings/media/st,st-delta.txt b/Documentation/devicetree/bindings/media/st,st-delta.txt
new file mode 100644
index 0000000000..a538ab30a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,st-delta.txt
@@ -0,0 +1,17 @@
+* STMicroelectronics DELTA multi-format video decoder
+
+Required properties:
+- compatible: should be "st,st-delta".
+- clocks: from common clock binding: handle hardware IP needed clocks, the
+  number of clocks may depend on the SoC type.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: names of the clocks listed in clocks property in the same order.
+
+Example:
+	delta0 {
+		compatible = "st,st-delta";
+		clock-names = "delta", "delta-st231", "delta-flash-promip";
+		clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+			 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+			 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+	};
diff --git a/Documentation/devicetree/bindings/media/st,st-hva.txt b/Documentation/devicetree/bindings/media/st,st-hva.txt
new file mode 100644
index 0000000000..0d76174a1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,st-hva.txt
@@ -0,0 +1,24 @@
+st-hva: multi-format video encoder for STMicroelectronics SoC.
+
+Required properties:
+- compatible: should be "st,st-hva".
+- reg: HVA physical address location and length, esram address location and
+  length.
+- reg-names: names of the registers listed in registers property in the same
+  order.
+- interrupts: HVA interrupt number.
+- clocks: from common clock binding: handle hardware IP needed clocks, the
+  number of clocks may depend on the SoC type.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: names of the clocks listed in clocks property in the same order.
+
+Example:
+	hva@8c85000{
+		compatible = "st,st-hva";
+		reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+		reg-names = "hva_registers", "hva_esram";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+			     <GIC_SPI 59 IRQ_TYPE_NONE>;
+		clock-names = "clk_hva";
+		clocks = <&clk_s_c0_flexgen CLK_HVA>;
+	};
diff --git a/Documentation/devicetree/bindings/media/st,stih4xx.txt b/Documentation/devicetree/bindings/media/st,stih4xx.txt
new file mode 100644
index 0000000000..df655cd3a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stih4xx.txt
@@ -0,0 +1,32 @@
+STMicroelectronics stih4xx platforms
+
+bdisp: 2D blitter for STMicroelectronics SoC.
+
+Required properties:
+- compatible: should be "st,stih407-bdisp".
+- reg: BDISP physical address location and length.
+- interrupts: BDISP interrupt number.
+- clocks: from common clock binding: handle hardware IP needed clocks, the
+  number of clocks may depend on the SoC type.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: names of the clocks listed in clocks property in the same order.
+
+Example:
+
+	bdisp0:bdisp@9f10000 {
+		compatible = "st,stih407-bdisp";
+		reg = <0x9f10000 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+		clock-names = "bdisp";
+		clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+	};
+
+Aliases:
+Each BDISP should have a numbered alias in the aliases node, in the form of
+bdispN, N = 0 or 1.
+
+Example:
+
+	aliases {
+		bdisp0 = &bdisp0;
+	};
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
new file mode 100644
index 0000000000..6b3e413ced
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI)
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-dcmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      DCMI supports a single port node with parallel bus.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+            default: 5
+
+          bus-width:
+            enum: [8, 10, 12, 14]
+            default: 8
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+                bus-width:
+                  enum: [8]
+
+        required:
+          - bus-type
+          - pclk-sample
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/media/video-interfaces.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+
+    dcmi: dcmi@4c006000 {
+        compatible = "st,stm32-dcmi";
+        reg = <0x4c006000 0x400>;
+        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc CAMITF_R>;
+        clocks = <&rcc DCMI>;
+        clock-names = "mclk";
+        dmas = <&dmamux1 75 0x400 0x0d>;
+        dma-names = "tx";
+
+        port {
+             dcmi_0: endpoint {
+                   remote-endpoint = <&ov5640_0>;
+                   bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+                   bus-width = <8>;
+                   hsync-active = <0>;
+                   vsync-active = <0>;
+                   pclk-sample = <1>;
+             };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
new file mode 100644
index 0000000000..4afa4a24b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D
+
+description:
+  Chrom-ART Accelerator(DMA2D), graphical hardware accelerator
+  enabling enhanced graphical user interface with minimum CPU load
+
+  It can perform the following operations.
+
+  - Filling a part or the whole of a destination image with a specific color.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image with a pixel format conversion.
+  - Blending a part and/or two complete source images with different pixel
+    format and copy the result into a part or the whole of a destination image
+    with a different color format. (TODO)
+
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+properties:
+  compatible:
+    const: st,stm32-dma2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dma2d
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    dma2d: dma2d@4002b000 {
+        compatible = "st,stm32-dma2d";
+        reg = <0x4002b000 0xc00>;
+        interrupts = <90>;
+        resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+        clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+        clock-names = "dma2d";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/st-rc.txt b/Documentation/devicetree/bindings/media/st-rc.txt
new file mode 100644
index 0000000000..05c432d08b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st-rc.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for ST IRB IP
+
+Required properties:
+	- compatible: Should contain "st,comms-irb".
+	- reg: Base physical address of the controller and length of memory
+	  mapped region.
+	- interrupts: interrupt-specifier for the sole interrupt generated by
+	  the device. The interrupt specifier format depends on the interrupt
+	  controller parent.
+	- rx-mode: can be "infrared" or "uhf". This property specifies the L1
+	  protocol used for receiving remote control signals. rx-mode should
+	  be present iff the rx pins are wired up.
+	- tx-mode: should be "infrared". This property specifies the L1
+	  protocol used for transmitting remote control signals. tx-mode should
+	  be present iff the tx pins are wired up.
+
+Optional properties:
+	- pinctrl-names, pinctrl-0: the pincontrol settings to configure muxing
+	  properly for IRB pins.
+	- clocks : phandle with clock-specifier pair for IRB.
+
+Example node:
+
+	rc: rc@fe518000 {
+		compatible	= "st,comms-irb";
+		reg		= <0xfe518000 0x234>;
+		interrupts	= <0 203 0>;
+		rx-mode		= "infrared";
+	};
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
new file mode 100644
index 0000000000..880d4d70c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -0,0 +1,88 @@
+STMicroelectronics STi c8sectpfe binding
+============================================
+
+This document describes the c8sectpfe device bindings that is used to get transport
+stream data into the SoC on the TS pins, and into DDR for further processing.
+
+It is typically used in conjunction with one or more demodulator and tuner devices
+which converts from the RF to digital domain. Demodulators and tuners are usually
+located on an external DVB frontend card connected to SoC TS input pins.
+
+Currently 7 TS input (tsin) channels are supported on the stih407 family SoC.
+
+Required properties (controller (parent) node):
+- compatible	: Should be "stih407-c8sectpfe"
+
+- reg		: Address and length of register sets for each device in
+		  "reg-names"
+
+- reg-names	: The names of the register addresses corresponding to the
+		  registers filled in "reg":
+			- c8sectpfe: c8sectpfe registers
+			- c8sectpfe-ram: c8sectpfe internal sram
+
+- clocks	: phandle list of c8sectpfe clocks
+- clock-names	: should be "c8sectpfe"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+- pinctrl-names	: a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num)
+		   must be defined for each tsin child node.
+- pinctrl-0	: phandle referencing pin configuration for this tsin configuration
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+
+Required properties (tsin (child) node):
+
+- tsin-num	: tsin id of the InputBlock (must be between 0 to 6)
+- i2c-bus	: phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
+- reset-gpios	: reset gpio for this tsin channel.
+
+Optional properties (tsin (child) node):
+
+- invert-ts-clk		: Bool property to control sense of ts input clock (data stored on falling edge of clk).
+- serial-not-parallel	: Bool property to configure input bus width (serial on ts_data<7>).
+- async-not-sync	: Bool property to control if data is received in asynchronous mode
+			   (all bits/bytes with ts_valid or ts_packet asserted are valid).
+
+- dvb-card		: Describes the NIM card connected to this tsin channel.
+
+Example:
+
+/* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */
+
+	c8sectpfe@8a20000 {
+		compatible = "st,stih407-c8sectpfe";
+		reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
+		reg-names = "stfe", "stfe-ram";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
+		interrupt-names = "stfe-error-irq", "stfe-idle-irq";
+		pinctrl-0	= <&pinctrl_tsin0_serial>;
+		pinctrl-1	= <&pinctrl_tsin0_parallel>;
+		pinctrl-2	= <&pinctrl_tsin3_serial>;
+		pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
+		pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
+		pinctrl-names	= "tsin0-serial",
+				  "tsin0-parallel",
+				  "tsin3-serial",
+				  "tsin4-serial",
+				  "tsin5-serial";
+		clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
+		clock-names = "c8sectpfe";
+
+		/* tsin0 is TSA on NIMA */
+		tsin0: port@0 {
+			tsin-num		= <0>;
+			serial-not-parallel;
+			i2c-bus			= <&ssc2>;
+			reset-gpios		= <&pio15 4 GPIO_ACTIVE_HIGH>;
+			dvb-card		= <STV0367_TDA18212_NIMA_1>;
+		};
+
+		tsin3: port@3 {
+			tsin-num		= <3>;
+			serial-not-parallel;
+			i2c-bus			= <&ssc3>;
+			reset-gpios		= <&pio15 7 GPIO_ACTIVE_HIGH>;
+			dvb-card		= <STV0367_TDA18212_NIMB_1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
new file mode 100644
index 0000000000..f1a940a110
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,cal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
+
+maintainers:
+  - Benoit Parrot <bparrot@ti.com>
+
+description: |-
+  The Camera Adaptation Layer (CAL) is a key component for image capture
+  applications. The capture module provides the system interface and the
+  processing capability to connect CSI2 image-sensor modules to the
+  DRA72x device.
+
+  CAL supports 2 camera port nodes on MIPI bus.
+
+properties:
+  compatible:
+    enum:
+      # for DRA72 controllers
+      - ti,dra72-cal
+      # for DRA72 controllers pre ES2.0
+      - ti,dra72-pre-es2-cal
+      # for DRA76 controllers
+      - ti,dra76-cal
+      # for AM654 controllers
+      - ti,am654-cal
+
+  reg:
+    minItems: 2
+    items:
+      - description: The CAL main register region
+      - description: The RX Core0 (DPHY0) register region
+      - description: The RX Core1 (DPHY1) register region
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: cal_top
+      - const: cal_rx_core0
+      - const: cal_rx_core1
+
+  interrupts:
+    maxItems: 1
+
+  ti,camerrx-control:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to device control module
+          - description: offset to the control_camerarx_core register
+    description:
+      phandle to the device control module and offset to the
+      control_camerarx_core register
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: 'CSI2 Port #0'
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: 'CSI2 Port #1'
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ti,camerrx-control
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cal: cal@4845b000 {
+        compatible = "ti,dra72-cal";
+        reg = <0x4845B000 0x400>,
+              <0x4845B800 0x40>,
+              <0x4845B900 0x40>;
+        reg-names = "cal_top",
+                    "cal_rx_core0",
+                    "cal_rx_core1";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        ti,camerrx-control = <&scm_conf 0xE94>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              csi2_0: port@0 {
+                    reg = <0>;
+                    csi2_phy0: endpoint {
+                           remote-endpoint = <&csi2_cam0>;
+                           clock-lanes = <0>;
+                           data-lanes = <1 2>;
+                    };
+              };
+        };
+    };
+
+    i2c {
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@3c {
+               compatible = "ovti,ov5640";
+               reg = <0x3c>;
+               AVDD-supply = <&reg_2p8v>;
+               DOVDD-supply = <&reg_1p8v>;
+               DVDD-supply = <&reg_1p5v>;
+               clocks = <&clk_ov5640_fixed>;
+               clock-names = "xclk";
+
+               port {
+                    csi2_cam0: endpoint {
+                            remote-endpoint = <&csi2_phy0>;
+                            clock-lanes = <0>;
+                            data-lanes = <1 2>;
+                    };
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
new file mode 100644
index 0000000000..e47c7ccc57
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
@@ -0,0 +1,106 @@
+Texas Instruments VPIF
+----------------------
+
+The TI Video Port InterFace (VPIF) is the primary component for video
+capture and display on the DA850/AM18x family of TI DaVinci/Sitara
+SoCs.
+
+TI Document reference: SPRUH82C, Chapter 35
+http://www.ti.com/lit/pdf/spruh82
+
+Required properties:
+- compatible: must be "ti,da850-vpif"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPIF
+
+Video Capture:
+
+VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
+single 16-bit channel. It should contain one or two port child nodes
+with child 'endpoint' node. If there are two ports then port@0 must
+describe the input and port@1 output channels. Please refer to the
+bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example using 2 8-bit input channels, one of which is connected to an
+I2C-connected TVP5147 decoder:
+
+	vpif: vpif@217000 {
+		compatible = "ti,da850-vpif";
+		reg = <0x217000 0x1000>;
+		interrupts = <92>;
+
+		port@0 {
+			vpif_input_ch0: endpoint@0 {
+				reg = <0>;
+				bus-width = <8>;
+				remote-endpoint = <&composite_in>;
+			};
+
+			vpif_input_ch1: endpoint@1 {
+				reg = <1>;
+				bus-width = <8>;
+				data-shift = <8>;
+			};
+		};
+
+		port@1 {
+			vpif_output_ch0: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&composite_out>;
+			};
+		};
+	};
+
+[ ... ]
+
+&i2c0 {
+
+	tvp5147@5d {
+		compatible = "ti,tvp5147";
+		reg = <0x5d>;
+
+		port {
+			composite_in: endpoint {
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+
+				/* VPIF channel 0 (lower 8-bits) */
+				remote-endpoint = <&vpif_input_ch0>;
+				bus-width = <8>;
+			};
+		};
+	};
+
+	adv7343@2a {
+		compatible = "adi,adv7343";
+		reg = <0x2a>;
+
+		port {
+			composite_out: endpoint {
+				adi,dac-enable = <1 1 1>;
+				adi,sd-dac-enable = <1>;
+
+				remote-endpoint = <&vpif_output_ch0>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+
+Alternatively, an example when the bus is configured as a single
+16-bit input (e.g. for raw-capture mode):
+
+	vpif: vpif@217000 {
+		compatible = "ti,da850-vpif";
+		reg = <0x217000 0x1000>;
+		interrupts = <92>;
+
+		port {
+			vpif_ch0: endpoint {
+				  bus-width = <16>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/ti,omap3isp.txt b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
new file mode 100644
index 0000000000..ac23de8556
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,omap3isp.txt
@@ -0,0 +1,71 @@
+OMAP 3 ISP Device Tree bindings
+===============================
+
+The DT definitions can be found in include/dt-bindings/media/omap3-isp.h.
+
+Required properties
+===================
+
+compatible	: must contain "ti,omap3-isp"
+
+reg		: the two registers sets (physical address and length) for the
+		  ISP. The first set contains the core ISP registers up to
+		  the end of the SBL block. The second set contains the
+		  CSI PHYs and receivers registers.
+interrupts	: the ISP interrupt specifier
+iommus		: phandle and IOMMU specifier for the IOMMU that serves the ISP
+syscon		: the phandle and register offset to the Complex I/O or CSI-PHY
+		  register
+ti,phy-type	: 0 -- OMAP3ISP_PHY_TYPE_COMPLEX_IO (e.g. 3430)
+		  1 -- OMAP3ISP_PHY_TYPE_CSIPHY (e.g. 3630)
+#clock-cells	: Must be 1 --- the ISP provides two external clocks,
+		  cam_xclka and cam_xclkb, at indices 0 and 1,
+		  respectively. Please find more information on common
+		  clock bindings in ../clock/clock-bindings.txt.
+
+Port nodes (optional)
+---------------------
+
+More documentation on these bindings is available in
+video-interfaces.txt in the same directory.
+
+reg		: The interface:
+		  0 - parallel (CCDC)
+		  1 - CSIPHY1 -- CSI2C / CCP2B on 3630;
+		      CSI1 -- CSIb on 3430
+		  2 - CSIPHY2 -- CSI2A / CCP2B on 3630;
+		      CSI2 -- CSIa on 3430
+
+Optional properties
+===================
+
+vdd-csiphy1-supply : voltage supply of the CSI-2 PHY 1
+vdd-csiphy2-supply : voltage supply of the CSI-2 PHY 2
+
+Endpoint nodes
+--------------
+
+lane-polarities	: lane polarity (required on CSI-2)
+		  0 -- not inverted; 1 -- inverted
+data-lanes	: an array of data lanes from 1 to 3. The length can
+		  be either 1 or 2. (required on CSI-2)
+clock-lanes	: the clock lane (from 1 to 3). (required on CSI-2)
+
+
+Example
+=======
+
+		isp@480bc000 {
+			compatible = "ti,omap3-isp";
+			reg = <0x480bc000 0x12fc
+			       0x480bd800 0x0600>;
+			interrupts = <24>;
+			iommus = <&mmu_isp>;
+			syscon = <&scm_conf 0x2f0>;
+			ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
+			#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
new file mode 100644
index 0000000000..7fa8a367ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,vpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA7x Video Processing Engine (VPE)
+
+maintainers:
+  - Benoit Parrot <bparrot@ti.com>
+
+description: |-
+  The Video Processing Engine (VPE) is a key component for image post
+  processing applications. VPE consist of a single memory to memory
+  path which can perform chroma up/down sampling, deinterlacing,
+  scaling and color space conversion.
+
+properties:
+  compatible:
+    const: ti,dra7-vpe
+
+  reg:
+    items:
+      - description: The VPE main register region
+      - description: Scaler (SC) register region
+      - description: Color Space Conversion (CSC) register region
+      - description: Video Port Direct Memory Access (VPDMA) register region
+
+  reg-names:
+    items:
+      - const: vpe_top
+      - const: sc
+      - const: csc
+      - const: vpdma
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vpe: vpe@489d0000 {
+        compatible = "ti,dra7-vpe";
+        reg = <0x489d0000 0x120>,
+              <0x489d0700 0x80>,
+              <0x489d5700 0x18>,
+              <0x489dd000 0x400>;
+        reg-names = "vpe_top",
+                    "sc",
+                    "csc",
+                    "vpdma";
+        interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 0000000000..3932e76655
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+	0 - Raw Bayer Interface.
+	1 - 8 Bit BT656 Interface.
+	2 - 10 Bit BT656 Interface.
+	3 - YCbCr 8 Bit Interface.
+	4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+	vpfe: vpfe@f0034000 {
+		compatible = "ti,am437x-vpfe";
+		reg = <0x48328000 0x2000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&vpfe_pins_default>;
+		pinctrl-1 = <&vpfe_pins_sleep>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vpfe0_ep: endpoint {
+				remote-endpoint = <&ov2659_1>;
+				ti,am437x-vpfe-interface = <0>;
+				bus-width = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+
+	i2c1: i2c@4802a000 {
+
+		ov2659@30 {
+			compatible = "ti,ov2659";
+			reg = <0x30>;
+
+			port {
+				ov2659_1: endpoint {
+					remote-endpoint = <&vpfe0_ep>;
+					bus-width = <8>;
+					mclk-frequency = <12000000>;
+				};
+			};
+	};
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
new file mode 100644
index 0000000000..cf7712ad29
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Video Receiver and Transmitter Devices
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+properties:
+  flash-leds:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      An array of phandles, each referring to a flash LED, a sub-node of the LED
+      driver device node.
+
+  lens-focus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the node of the focus lens controller.
+
+  rotation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 90, 180, 270 ]
+    description: |
+      The camera rotation is expressed as the angular difference in degrees
+      between two reference systems, one relative to the camera module, and one
+      defined on the external world scene to be captured when projected on the
+      image sensor pixel array.
+
+      A camera sensor has a 2-dimensional reference system 'Rc' defined by its
+      pixel array read-out order. The origin is set to the first pixel being
+      read out, the X-axis points along the column read-out direction towards
+      the last columns, and the Y-axis along the row read-out direction towards
+      the last row.
+
+      A typical example for a sensor with a 2592x1944 pixel array matrix
+      observed from the front is:
+
+              2591       X-axis          0
+                <------------------------+ 0
+                .......... ... ..........!
+                .......... ... ..........! Y-axis
+                           ...           !
+                .......... ... ..........!
+                .......... ... ..........! 1943
+                                         V
+
+      The external world scene reference system 'Rs' is a 2-dimensional
+      reference system on the focal plane of the camera module. The origin is
+      placed on the top-left corner of the visible scene, the X-axis points
+      towards the right, and the Y-axis points towards the bottom of the scene.
+      The top, bottom, left and right directions are intentionally not defined
+      and depend on the environment in which the camera is used.
+
+      A typical example of a (very common) picture of a shark swimming from left
+      to right, as seen from the camera, is:
+
+               0               X-axis
+             0 +------------------------------------->
+               !
+               !
+               !
+               !           |\____)\___
+               !           ) _____  __`<
+               !           |/     )/
+               !
+               !
+               !
+               V
+             Y-axis
+
+      with the reference system 'Rs' placed on the camera focal plane:
+
+                                  ¸.·˙!
+                              ¸.·˙    !
+                  _       ¸.·˙        !
+               +-/ \-+¸.·˙            !
+               | (o) |                ! Camera focal plane
+               +-----+˙·.¸            !
+                          ˙·.¸        !
+                              ˙·.¸    !
+                                  ˙·.¸!
+
+      When projected on the sensor's pixel array, the image and the associated
+      reference system 'Rs' are typically (but not always) inverted, due to the
+      camera module's lens optical inversion effect.
+
+      Assuming the above represented scene of the swimming shark, the lens
+      inversion projects the scene and its reference system onto the sensor
+      pixel array, seen from the front of the camera sensor, as follows:
+
+            Y-axis
+               ^
+               !
+               !
+               !
+               !            |\_____)\__
+               !            ) ____  ___.<
+               !            |/    )/
+               !
+               !
+               !
+             0 +------------------------------------->
+               0               X-axis
+
+      Note the shark being upside-down.
+
+      The resulting projected reference system is named 'Rp'.
+
+      The camera rotation property is then defined as the angular difference in
+      the counter-clockwise direction between the camera reference system 'Rc'
+      and the projected scene reference system 'Rp'. It is expressed in degrees
+      as a number in the range [0, 360[.
+
+      Examples
+
+      0 degrees camera rotation:
+
+
+                    Y-Rp
+                     ^
+              Y-Rc   !
+               ^     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !     !
+               !   0 +------------------------------------->
+               !     0               X-Rp
+             0 +------------------------------------->
+               0               X-Rc
+
+
+                                X-Rc                0
+               <------------------------------------+ 0
+                           X-Rp                 0   !
+           <------------------------------------+ 0 !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   !
+                                                !   V
+                                                !  Y-Rc
+                                                V
+                                               Y-Rp
+
+      90 degrees camera rotation:
+
+               0        Y-Rc
+             0 +-------------------->
+               !   Y-Rp
+               !    ^
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !    !
+               !  0 +------------------------------------->
+               !    0              X-Rp
+               !
+               !
+               !
+               !
+               V
+              X-Rc
+
+      180 degrees camera rotation:
+
+                                            0
+       <------------------------------------+ 0
+                        X-Rc                !
+              Y-Rp                          !
+               ^                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            !
+               !                            V
+               !                           Y-Rc
+             0 +------------------------------------->
+               0              X-Rp
+
+      270 degrees camera rotation:
+
+               0        Y-Rc
+             0 +-------------------->
+               !                                        0
+               !    <-----------------------------------+ 0
+               !                    X-Rp                !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        !
+               !                                        V
+               !                                       Y-Rp
+               !
+               !
+               !
+               !
+               V
+              X-Rc
+
+
+      Example one - Webcam
+
+      A camera module installed on the user facing part of a laptop screen
+      casing used for video calls. The captured images are meant to be displayed
+      in landscape mode (width > height) on the laptop screen.
+
+      The camera is typically mounted upside-down to compensate the lens optical
+      inversion effect:
+
+                    Y-Rp
+              Y-Rc   ^
+               ^     !
+               !     !
+               !     !       |\_____)\__
+               !     !       ) ____  ___.<
+               !     !       |/    )/
+               !     !
+               !     !
+               !     !
+               !   0 +------------------------------------->
+               !     0           X-Rp
+             0 +------------------------------------->
+               0            X-Rc
+
+      The two reference systems are aligned, the resulting camera rotation is
+      0 degrees, no rotation correction needs to be applied to the resulting
+      image once captured to memory buffers to correctly display it to users:
+
+               +--------------------------------------+
+               !                                      !
+               !                                      !
+               !                                      !
+               !             |\____)\___              !
+               !             ) _____  __`<            !
+               !             |/     )/                !
+               !                                      !
+               !                                      !
+               !                                      !
+               +--------------------------------------+
+
+      If the camera sensor is not mounted upside-down to compensate for the lens
+      optical inversion, the two reference systems will not be aligned, with
+      'Rp' being rotated 180 degrees relatively to 'Rc':
+
+
+                        X-Rc                0
+       <------------------------------------+ 0
+                                            !
+              Y-Rp                          !
+               ^                            !
+               !                            !
+               !       |\_____)\__          !
+               !       ) ____  ___.<        !
+               !       |/    )/             !
+               !                            !
+               !                            !
+               !                            V
+               !                           Y-Rc
+             0 +------------------------------------->
+               0            X-Rp
+
+      The image once captured to memory will then be rotated by 180 degrees:
+
+               +--------------------------------------+
+               !                                      !
+               !                                      !
+               !                                      !
+               !              __/(_____/|             !
+               !            >.___  ____ (             !
+               !                 \(    \|             !
+               !                                      !
+               !                                      !
+               !                                      !
+               +--------------------------------------+
+
+      A software rotation correction of 180 degrees should be applied to
+      correctly display the image:
+
+               +--------------------------------------+
+               !                                      !
+               !                                      !
+               !                                      !
+               !             |\____)\___              !
+               !             ) _____  __`<            !
+               !             |/     )/                !
+               !                                      !
+               !                                      !
+               !                                      !
+               +--------------------------------------+
+
+      Example two - Phone camera
+
+      A camera installed on the back side of a mobile device facing away from
+      the user. The captured images are meant to be displayed in portrait mode
+      (height > width) to match the device screen orientation and the device
+      usage orientation used when taking the picture.
+
+      The camera sensor is typically mounted with its pixel array longer side
+      aligned to the device longer side, upside-down mounted to compensate for
+      the lens optical inversion effect:
+
+               0        Y-Rc
+             0 +-------------------->
+               !   Y-Rp
+               !    ^
+               !    !
+               !    !
+               !    !
+               !    !            |\_____)\__
+               !    !            ) ____  ___.<
+               !    !            |/    )/
+               !    !
+               !    !
+               !    !
+               !  0 +------------------------------------->
+               !    0                X-Rp
+               !
+               !
+               !
+               !
+               V
+              X-Rc
+
+      The two reference systems are not aligned and the 'Rp' reference system is
+      rotated by 90 degrees in the counter-clockwise direction relatively to the
+      'Rc' reference system.
+
+      The image once captured to memory will be rotated:
+
+               +-------------------------------------+
+               |                 _ _                 |
+               |                \   /                |
+               |                 | |                 |
+               |                 | |                 |
+               |                 |  >                |
+               |                <  |                 |
+               |                 | |                 |
+               |                   .                 |
+               |                  V                  |
+               +-------------------------------------+
+
+      A correction of 90 degrees in counter-clockwise direction has to be
+      applied to correctly display the image in portrait mode on the device
+      screen:
+
+                        +--------------------+
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |   |\____)\___      |
+                        |   ) _____  __`<    |
+                        |   |/     )/        |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        |                    |
+                        +--------------------+
+
+  orientation:
+    description:
+      The orientation of a device (typically an image sensor or a flash LED)
+      describing its mounting position relative to the usage orientation of the
+      system where the device is installed on.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+        # Front. The device is mounted on the front facing side of the system. For
+        # mobile devices such as smartphones, tablets and laptops the front side
+        # is the user facing side.
+      - 0
+        # Back. The device is mounted on the back side of the system, which is
+        # defined as the opposite side of the front facing one.
+      - 1
+        # External. The device is not attached directly to the system but is
+        # attached in a way that allows it to move freely.
+      - 2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
new file mode 100644
index 0000000000..8fcf5f52bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -0,0 +1 @@
+This file has moved to video-interfaces.yaml and video-interface-devices.yaml.
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
new file mode 100644
index 0000000000..a211d49dc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-interfaces.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Video Receiver and Transmitter Interface Endpoints
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  Video data pipelines usually consist of external devices, e.g. camera sensors,
+  controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+  video DMA engines and video data processors.
+
+  SoC internal blocks are described by DT nodes, placed similarly to other SoC
+  blocks.  External devices are represented as child nodes of their respective
+  bus controller nodes, e.g. I2C.
+
+  Data interfaces on all video devices are described by their child 'port' nodes.
+  Configuration of a port depends on other devices participating in the data
+  transfer and is described by 'endpoint' subnodes.
+
+  device {
+      ...
+      ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+              ...
+              endpoint@0 { ... };
+              endpoint@1 { ... };
+          };
+          port@1 { ... };
+      };
+  };
+
+  If a port can be configured to work with more than one remote device on the same
+  bus, an 'endpoint' child node must be provided for each of them.  If more than
+  one port is present in a device node or there is more than one endpoint at a
+  port, or port node needs to be associated with a selected hardware interface,
+  a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+  used.
+
+  All 'port' nodes can be grouped under optional 'ports' node, which allows to
+  specify #address-cells, #size-cells properties independently for the 'port'
+  and 'endpoint' nodes and any child device nodes a device might have.
+
+  Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+  phandles.  An endpoint subnode of a device contains all properties needed for
+  configuration of this device for data exchange with other device.  In most
+  cases properties at the peer 'endpoint' nodes will be identical, however they
+  might need to be different when there is any signal modifications on the bus
+  between two devices, e.g. there are logic signal inverters on the lines.
+
+  It is allowed for multiple endpoints at a port to be active simultaneously,
+  where supported by a device.  For example, in case where a data interface of
+  a device is partitioned into multiple data busses, e.g. 16-bit input port
+  divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
+  and data-shift properties can be used to assign physical data lines to each
+  endpoint node (logical bus).
+
+  Documenting bindings for devices
+  --------------------------------
+
+  All required and optional bindings the device supports shall be explicitly
+  documented in device DT binding documentation. This also includes port and
+  endpoint nodes for the device, including unit-addresses and reg properties
+  where relevant.
+
+allOf:
+  - $ref: /schemas/graph.yaml#/$defs/endpoint-base
+
+properties:
+  slave-mode:
+    type: boolean
+    description:
+      Indicates that the link is run in slave mode. The default when this
+      property is not specified is master mode. In the slave mode horizontal and
+      vertical synchronization signals are provided to the slave device (data
+      source) by the master device (data sink). In the master mode the data
+      source device is also the source of the synchronization signals.
+
+  bus-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1 # MIPI CSI-2 C-PHY
+      - 2 # MIPI CSI1
+      - 3 # CCP2
+      - 4 # MIPI CSI-2 D-PHY
+      - 5 # Parallel
+      - 6 # BT.656
+      - 7 # DPI
+    description:
+      Data bus type.
+
+  bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 64
+    description:
+      Number of data lines actively used, valid for the parallel busses.
+
+  data-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 64
+    description:
+      On the parallel data busses, if bus-width is used to specify the number of
+      data lines, data-shift can be used to specify which data lines are used,
+      e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+
+  hsync-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+
+  vsync-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. Note,
+      that if HSYNC and VSYNC polarities are not specified, embedded
+      synchronization may be required, where supported.
+
+  data-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Similar to HSYNC and VSYNC, specifies data line polarity.
+
+  data-enable-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Similar to HSYNC and VSYNC, specifies the data enable signal polarity.
+
+  field-even-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Field signal level during the even field data transmission.
+
+  pclk-sample:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+    description:
+      Sample data on falling (0), rising (1) or both (2) edges of the pixel
+      clock signal.
+
+  sync-on-green-active:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively.
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    items:
+      # Assume up to 9 physical lane indices
+      maximum: 8
+    description:
+      An array of physical data lane indexes. Position of an entry determines
+      the logical lane number, while the value of an entry indicates physical
+      lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;",
+      assuming the clock lane is on hardware lane 0. If the hardware does not
+      support lane reordering, monotonically incremented values shall be used
+      from 0 or 1 onwards, depending on whether or not there is also a clock
+      lane. This property is valid for serial busses only (e.g. MIPI CSI-2).
+
+  clock-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    # Assume up to 9 physical lane indices
+    maximum: 8
+    description:
+      Physical clock lane index. Position of an entry determines the logical
+      lane number, while the value of an entry indicates physical lane, e.g. for
+      a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which places the
+      clock lane on hardware lane 0. This property is valid for serial busses
+      only (e.g. MIPI CSI-2).
+
+  clock-noncontinuous:
+    type: boolean
+    description:
+      Allow MIPI CSI-2 non-continuous clock mode.
+
+  link-frequencies:
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    description:
+      Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the
+      actual frequency of the bus, not bits per clock per lane value. An array
+      of 64-bit unsigned integers.
+
+  lane-polarities:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 9
+    items:
+      enum: [ 0, 1 ]
+    description:
+      An array of polarities of the lanes starting from the clock lane and
+      followed by the data lanes in the same order as in data-lanes. Valid
+      values are 0 (normal) and 1 (inverted). The length of the array should be
+      the combined length of data-lanes and clock-lanes properties. If the
+      lane-polarities property is omitted, the value must be interpreted as 0
+      (normal). This property is valid for serial busses only.
+
+  strobe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Whether the clock signal is used as clock (0) or strobe (1). Used with
+      CCP2, for instance.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/video-mux.yaml b/Documentation/devicetree/bindings/media/video-mux.yaml
new file mode 100644
index 0000000000..2f28a7dad9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/video-mux.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/video-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Video Multiplexer
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  Video multiplexers allow to select between multiple input ports. Video
+  received on the active input port is passed through to the output port. Muxes
+  described by this binding are controlled by a multiplexer controller.
+
+properties:
+  compatible:
+    const: video-mux
+
+  mux-controls:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@':
+        $ref: /schemas/graph.yaml#/properties/port
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+
+patternProperties:
+  '^port@':
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      At least three port nodes containing endpoints connecting to the source
+      and sink devices according to of_graph bindings. The last port is the
+      output port, all others are inputs.
+
+required:
+  - compatible
+  - mux-controls
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port@0
+      - port@1
+      - port@2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+    };
+
+    video-mux {
+        compatible = "video-mux";
+        mux-controls = <&mux>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+            reg = <0>;
+
+            mux_in0: endpoint {
+                remote-endpoint = <&video_source0_out>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+
+            mux_in1: endpoint {
+                remote-endpoint = <&video_source1_out>;
+            };
+        };
+
+        port@2 {
+            reg = <2>;
+
+            mux_out: endpoint {
+                remote-endpoint = <&capture_interface_in>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/xilinx/video.txt b/Documentation/devicetree/bindings/media/xilinx/video.txt
new file mode 100644
index 0000000000..d0335ca0cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/xilinx/video.txt
@@ -0,0 +1,35 @@
+DT bindings for Xilinx video IP cores
+-------------------------------------
+
+Xilinx video IP cores process video streams by acting as video sinks and/or
+sources. They are connected by links through their input and output ports,
+creating a video pipeline.
+
+Each video IP core is represented by an AMBA bus child node in the device
+tree using bindings documented in this directory. Connections between the IP
+cores are represented as defined in ../video-interfaces.txt.
+
+The whole  pipeline is represented by an AMBA bus child node in the device
+tree using bindings documented in ./xlnx,video.txt.
+
+Common properties
+-----------------
+
+The following properties are common to all Xilinx video IP cores.
+
+- xlnx,video-format: This property represents a video format transmitted on an
+  AXI bus between video IP cores, using its VF code as defined in "AXI4-Stream
+  Video IP and System Design Guide" [UG934]. How the format relates to the IP
+  core is described in the IP core bindings documentation.
+
+- xlnx,video-width: This property qualifies the video format with the sample
+  width expressed as a number of bits per pixel component. All components must
+  use the same width.
+
+- xlnx,cfa-pattern: When the video format is set to Mono/Sensor, this property
+  describes the sensor's color filter array pattern. Supported values are
+  "bggr", "gbrg", "grbg", "rggb" and "mono". If not specified, the pattern
+  defaults to "mono".
+
+
+[UG934] https://www.xilinx.com/support/documentation/ip_documentation/axi_videoip/v1_0/ug934_axi_videoIP.pdf
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
new file mode 100644
index 0000000000..43daf837fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/xilinx/xlnx,csi2rxss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx MIPI CSI-2 Receiver Subsystem
+
+maintainers:
+  - Vishal Sagar <vishal.sagar@amd.com>
+
+description: |
+  The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2
+  traffic from compliant camera sensors and send the output as AXI4 Stream
+  video data for image processing.
+  The subsystem consists of a MIPI D-PHY in slave mode which captures the
+  data packets. This is passed along the MIPI CSI-2 Rx IP which extracts the
+  packet data. The optional Video Format Bridge (VFB) converts this data to
+  AXI4 Stream video data.
+  For more details, please refer to PG232 Xilinx MIPI CSI-2 Receiver Subsystem.
+  Please note that this bindings includes only the MIPI CSI-2 Rx controller
+  and Video Format Bridge and not D-PHY.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,mipi-csi2-rx-subsystem-5.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: List of clock specifiers
+    items:
+      - description: AXI Lite clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: lite_aclk
+      - const: video_aclk
+
+  xlnx,csi-pxl-format:
+    description: |
+      This denotes the CSI Data type selected in hw design.
+      Packets other than this data type (except for RAW8 and
+      User defined data types) will be filtered out.
+      Possible values are as below -
+      0x1e - YUV4228B
+      0x1f - YUV42210B
+      0x20 - RGB444
+      0x21 - RGB555
+      0x22 - RGB565
+      0x23 - RGB666
+      0x24 - RGB888
+      0x28 - RAW6
+      0x29 - RAW7
+      0x2a - RAW8
+      0x2b - RAW10
+      0x2c - RAW12
+      0x2d - RAW14
+      0x2e - RAW16
+      0x2f - RAW20
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - minimum: 0x1e
+        maximum: 0x24
+      - minimum: 0x28
+        maximum: 0x2f
+
+  xlnx,vfb:
+    type: boolean
+    description: Present when Video Format Bridge is enabled in IP configuration
+
+  xlnx,en-csi-v2-0:
+    type: boolean
+    description: Present if CSI v2 is enabled in IP configuration.
+
+  xlnx,en-vcx:
+    type: boolean
+    description: |
+      When present, there are maximum 16 virtual channels, else only 4.
+
+  xlnx,en-active-lanes:
+    type: boolean
+    description: |
+      Present if the number of active lanes can be re-configured at
+      runtime in the Protocol Configuration Register. Otherwise all lanes,
+      as set in IP configuration, are always active.
+
+  video-reset-gpios:
+    description: Optional specifier for a GPIO that asserts video_aresetn.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input / sink port node, single endpoint describing the
+          CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: |
+                  This is required only in the sink port 0 endpoint which
+                  connects to MIPI CSI-2 source like sensor.
+                  The possible values are -
+                  1       - For 1 lane enabled in IP.
+                  1 2     - For 2 lanes enabled in IP.
+                  1 2 3   - For 3 lanes enabled in IP.
+                  1 2 3 4 - For 4 lanes enabled in IP.
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output / source port node, endpoint describing modules
+          connected the CSI-2 receiver.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+allOf:
+  - if:
+      required:
+        - xlnx,vfb
+    then:
+      required:
+        - xlnx,csi-pxl-format
+    else:
+      properties:
+        xlnx,csi-pxl-format: false
+
+  - if:
+      not:
+        required:
+          - xlnx,en-csi-v2-0
+    then:
+      properties:
+        xlnx,en-vcx: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    xcsi2rxss_1: csi2rx@a0020000 {
+        compatible = "xlnx,mipi-csi2-rx-subsystem-5.0";
+        reg = <0xa0020000 0x10000>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 95 4>;
+        xlnx,csi-pxl-format = <0x2a>;
+        xlnx,vfb;
+        xlnx,en-active-lanes;
+        xlnx,en-csi-v2-0;
+        xlnx,en-vcx;
+        clock-names = "lite_aclk", "video_aclk";
+        clocks = <&misc_clk_0>, <&misc_clk_1>;
+        video-reset-gpios = <&gpio 86 GPIO_ACTIVE_LOW>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                /* Sink port */
+                reg = <0>;
+                csiss_in: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    /* MIPI CSI-2 Camera handle */
+                    remote-endpoint = <&camera_out>;
+                };
+            };
+            port@1 {
+                /* Source port */
+                reg = <1>;
+                csiss_out: endpoint {
+                    remote-endpoint = <&vproc_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tc.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tc.txt
new file mode 100644
index 0000000000..2aed3b4a6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tc.txt
@@ -0,0 +1,33 @@
+Xilinx Video Timing Controller (VTC)
+------------------------------------
+
+The Video Timing Controller is a general purpose video timing generator and
+detector.
+
+Required properties:
+
+  - compatible: Must be "xlnx,v-tc-6.1".
+
+  - reg: Physical base address and length of the registers set for the device.
+
+  - clocks: Must contain a clock specifier for the VTC core and timing
+    interfaces clock.
+
+Optional properties:
+
+  - xlnx,detector: The VTC has a timing detector
+  - xlnx,generator: The VTC has a timing generator
+
+  At least one of the xlnx,detector and xlnx,generator properties must be
+  specified.
+
+
+Example:
+
+	vtc: vtc@43c40000 {
+		compatible = "xlnx,v-tc-6.1";
+		reg = <0x43c40000 0x10000>;
+
+		clocks = <&clkc 15>;
+		xlnx,generator;
+	};
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt
new file mode 100644
index 0000000000..439351ab2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt
@@ -0,0 +1,71 @@
+Xilinx Video Test Pattern Generator (TPG)
+-----------------------------------------
+
+Required properties:
+
+- compatible: Must contain at least one of
+
+    "xlnx,v-tpg-5.0" (TPG version 5.0)
+    "xlnx,v-tpg-6.0" (TPG version 6.0)
+
+  TPG versions backward-compatible with previous versions should list all
+  compatible versions in the newer to older order.
+
+- reg: Physical base address and length of the registers set for the device.
+
+- clocks: Reference to the video core clock.
+
+- xlnx,video-format, xlnx,video-width: Video format and width, as defined in
+  video.txt.
+
+- port: Video port, using the DT bindings defined in ../video-interfaces.txt.
+  The TPG has a single output port numbered 0.
+
+Optional properties:
+
+- xlnx,vtc: A phandle referencing the Video Timing Controller that generates
+  video timings for the TPG test patterns.
+
+- timing-gpios: Specifier for a GPIO that controls the timing mux at the TPG
+  input. The GPIO active level corresponds to the selection of VTC-generated
+  video timings.
+
+The xlnx,vtc and timing-gpios properties are mandatory when the TPG is
+synthesized with two ports and forbidden when synthesized with one port.
+
+Example:
+
+	tpg_0: tpg@40050000 {
+		compatible = "xlnx,v-tpg-6.0", "xlnx,v-tpg-5.0";
+		reg = <0x40050000 0x10000>;
+		clocks = <&clkc 15>;
+
+		xlnx,vtc = <&vtc_3>;
+		timing-gpios = <&ps7_gpio_0 55 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				xlnx,video-format = <XVIP_VF_YUV_422>;
+				xlnx,video-width = <8>;
+
+				tpg_in: endpoint {
+					remote-endpoint = <&adv7611_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+
+				xlnx,video-format = <XVIP_VF_YUV_422>;
+				xlnx,video-width = <8>;
+
+				tpg1_out: endpoint {
+					remote-endpoint = <&switch_in0>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt
new file mode 100644
index 0000000000..5a02270236
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,video.txt
@@ -0,0 +1,55 @@
+Xilinx Video IP Pipeline (VIPP)
+-------------------------------
+
+General concept
+---------------
+
+Xilinx video IP pipeline processes video streams through one or more Xilinx
+video IP cores. Each video IP core is represented as documented in video.txt
+and IP core specific documentation, xlnx,v-*.txt, in this directory. The DT
+node of the VIPP represents as a top level node of the pipeline and defines
+mappings between DMAs and the video IP cores.
+
+Required properties:
+
+- compatible: Must be "xlnx,video".
+
+- dmas, dma-names: List of one DMA specifier and identifier string (as defined
+  in Documentation/devicetree/bindings/dma/dma.txt) per port. Each port
+  requires a DMA channel with the identifier string set to "port" followed by
+  the port index.
+
+- ports: Video port, using the DT bindings defined in ../video-interfaces.txt.
+
+Required port properties:
+
+- direction: should be either "input" or "output" depending on the direction
+  of stream.
+
+Example:
+
+	video_cap {
+		compatible = "xlnx,video";
+		dmas = <&vdma_1 1>, <&vdma_3 1>;
+		dma-names = "port0", "port1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				direction = "input";
+				vcap0_in0: endpoint {
+					remote-endpoint = <&scaler0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				direction = "input";
+				vcap0_in1: endpoint {
+					remote-endpoint = <&switch_out1>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
new file mode 100644
index 0000000000..22b77ee02f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
@@ -0,0 +1,127 @@
+* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
+
+Required properties:
+
+- compatible:		Must be "arm,primecell" and exactly one from
+			"arm,pl172", "arm,pl175" or "arm,pl176".
+
+- reg:			Must contains offset/length value for controller.
+
+- #address-cells:	Must be 2. The partition number has to be encoded in the
+			first address cell and it may accept values 0..N-1
+			(N - total number of partitions). The second cell is the
+			offset into the partition.
+
+- #size-cells:		Must be set to 1.
+
+- ranges:		Must contain one or more chip select memory regions.
+
+- clocks:		Must contain references to controller clocks.
+
+- clock-names:		Must contain "mpmcclk" and "apb_pclk".
+
+- clock-ranges:		Empty property indicating that child nodes can inherit
+			named clocks. Required only if clock tree data present
+			in device tree.
+			See clock-bindings.txt
+
+Child chip-select (cs) nodes contain the memory devices nodes connected to
+such as NOR (e.g. cfi-flash) and NAND.
+
+Required child cs node properties:
+
+- #address-cells:	Must be 2.
+
+- #size-cells:		Must be 1.
+
+- ranges:		Empty property indicating that child nodes can inherit
+			memory layout.
+
+- clock-ranges:		Empty property indicating that child nodes can inherit
+			named clocks. Required only if clock tree data present
+			in device tree.
+
+- mpmc,cs:		Chip select number. Indicates to the pl0172 driver
+			which chipselect is used for accessing the memory.
+
+- mpmc,memory-width:	Width of the chip select memory. Must be equal to
+			either 8, 16 or 32.
+
+Optional child cs node config properties:
+
+- mpmc,async-page-mode:	Enable asynchronous page mode.
+
+- mpmc,cs-active-high:	Set chip select polarity to active high.
+
+- mpmc,byte-lane-low:	Set byte lane state to low.
+
+- mpmc,extended-wait:	Enable extended wait.
+
+- mpmc,buffer-enable:	Enable write buffer, option is not supported by
+			PL175 and PL176 controllers.
+
+- mpmc,write-protect:	Enable write protect.
+
+Optional child cs node timing properties:
+
+- mpmc,write-enable-delay:	Delay from chip select assertion to write
+				enable (WE signal) in nano seconds.
+
+- mpmc,output-enable-delay:	Delay from chip select assertion to output
+				enable (OE signal) in nano seconds.
+
+- mpmc,write-access-delay:	Delay from chip select assertion to write
+				access in nano seconds.
+
+- mpmc,read-access-delay:	Delay from chip select assertion to read
+				access in nano seconds.
+
+- mpmc,page-mode-read-delay:	Delay for asynchronous page mode sequential
+				accesses in nano seconds.
+
+- mpmc,turn-round-delay:	Delay between access to memory banks in nano
+				seconds.
+
+If any of the above timing parameters are absent, current parameter value will
+be taken from the corresponding HW reg.
+
+Example for pl172 with nor flash on chip select 0 shown below.
+
+emc: memory-controller@40005000 {
+	compatible = "arm,pl172", "arm,primecell";
+	reg = <0x40005000 0x1000>;
+	clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+	clock-names = "mpmcclk", "apb_pclk";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x1c000000 0x1000000
+		  1 0 0x1d000000 0x1000000
+		  2 0 0x1e000000 0x1000000
+		  3 0 0x1f000000 0x1000000>;
+
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		mpmc,cs = <0>;
+		mpmc,memory-width = <16>;
+		mpmc,byte-lane-low;
+		mpmc,write-enable-delay = <0>;
+		mpmc,output-enable-delay = <0>;
+		mpmc,read-enable-delay = <70>;
+		mpmc,page-mode-read-delay = <70>;
+
+		flash@0,0 {
+			compatible = "sst,sst39vf320", "cfi-flash";
+			reg = <0 0 0x400000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "data";
+				reg = <0 0x400000>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml
new file mode 100644
index 0000000000..05dd6b3a1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl35x-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PL35x Series Static Memory Controller (SMC)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  The PL35x Static Memory Controller is a bus where you can connect two kinds
+  of memory interfaces, which are NAND and memory mapped interfaces (such as
+  SRAM or NOR) depending on the specific configuration.
+
+  The TRM is available here:
+  https://documentation-service.arm.com/static/5e8e2524fd977155116a58aa
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
+      - const: arm,primecell
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    items:
+      - description:
+          Configuration registers for the host and sub-controllers.
+          The three chip select regions are defined in 'ranges'.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined or Memory interface 0 IRQ
+      - description: Memory interface 1 IRQ
+
+patternProperties:
+  "@[0-7],[a-f0-9]+$":
+    type: object
+    additionalProperties: true
+    description: |
+      The child device node represents the controller connected to the SMC
+      bus. The controller can be a NAND controller or a pair of any memory
+      mapped controllers such as NOR and SRAM controllers.
+
+    properties:
+      compatible:
+        description:
+          Compatible of memory controller.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  Chip-select ID, as in the parent range property.
+                minimum: 0
+                maximum: 7
+              - description: |
+                  Offset of the memory region requested by the device.
+              - description: |
+                  Length of the memory region requested by the device.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,pl354
+    then:
+      properties:
+        clocks:
+          # According to TRM, really should be 3 clocks
+          maxItems: 1
+
+        clock-names:
+          const: apb_pclk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock for the memory device bus
+            - description: main clock of the SMC
+
+        clock-names:
+          items:
+            - const: memclk
+            - const: apb_pclk
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
new file mode 100644
index 0000000000..94bf7896a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt
@@ -0,0 +1,137 @@
+* Device tree bindings for Atmel EBI
+
+The External Bus Interface (EBI) controller is a bus where you can connect
+asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs).
+The EBI provides a glue-less interface to asynchronous memories through the SMC
+(Static Memory Controller).
+
+Required properties:
+
+- compatible:		"atmel,at91sam9260-ebi"
+			"atmel,at91sam9261-ebi"
+			"atmel,at91sam9263-ebi0"
+			"atmel,at91sam9263-ebi1"
+			"atmel,at91sam9rl-ebi"
+			"atmel,at91sam9g45-ebi"
+			"atmel,at91sam9x5-ebi"
+			"atmel,sama5d3-ebi"
+			"microchip,sam9x60-ebi"
+
+- reg:			Contains offset/length value for EBI memory mapping.
+			This property might contain several entries if the EBI
+			memory range is not contiguous
+
+- #address-cells:	Must be 2.
+			The first cell encodes the CS.
+			The second cell encode the offset into the CS memory
+			range.
+
+- #size-cells:		Must be set to 1.
+
+- ranges:		Encodes CS to memory region association.
+
+- clocks:		Clock feeding the EBI controller.
+			See clock-bindings.txt
+
+Children device nodes are representing device connected to the EBI bus.
+
+Required device node properties:
+
+- reg:			Contains the chip-select id, the offset and the length
+			of the memory region requested by the device.
+
+EBI bus configuration will be defined directly in the device subnode.
+
+Optional EBI/SMC properties:
+
+- atmel,smc-bus-width:		width of the asynchronous device's data bus
+				8, 16 or 32.
+				Default to 8 when undefined.
+
+- atmel,smc-byte-access-type	"write" or "select" (see Atmel datasheet).
+				Default to "select" when undefined.
+
+- atmel,smc-read-mode		"nrd" or "ncs".
+				Default to "ncs" when undefined.
+
+- atmel,smc-write-mode		"nwe" or "ncs".
+				Default to "ncs" when undefined.
+
+- atmel,smc-exnw-mode		"disabled", "frozen" or "ready".
+				Default to "disabled" when undefined.
+
+- atmel,smc-page-mode		enable page mode if present. The provided value
+				defines the page size (supported values: 4, 8,
+				16 and 32).
+
+- atmel,smc-tdf-mode:		"normal" or "optimized". When set to
+				"optimized" the data float time is optimized
+				depending on the next device being accessed
+				(next device setup time is subtracted to the
+				current device data float time).
+				Default to "normal" when undefined.
+
+If at least one atmel,smc- property is defined the following SMC timing
+properties become mandatory. In the other hand, if none of the atmel,smc-
+properties are specified, we assume that the EBI bus configuration will be
+handled by the sub-device driver, and none of those properties should be
+defined.
+
+All the timings are expressed in nanoseconds (see Atmel datasheet for a full
+description).
+
+- atmel,smc-ncs-rd-setup-ns
+- atmel,smc-nrd-setup-ns
+- atmel,smc-ncs-wr-setup-ns
+- atmel,smc-nwe-setup-ns
+- atmel,smc-ncs-rd-pulse-ns
+- atmel,smc-nrd-pulse-ns
+- atmel,smc-ncs-wr-pulse-ns
+- atmel,smc-nwe-pulse-ns
+- atmel,smc-nwe-cycle-ns
+- atmel,smc-nrd-cycle-ns
+- atmel,smc-tdf-ns
+
+Example:
+
+	ebi: ebi@10000000 {
+		compatible = "atmel,sama5d3-ebi";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		atmel,smc = <&hsmc>;
+		atmel,matrix = <&matrix>;
+		reg = <0x10000000 0x10000000
+		       0x40000000 0x30000000>;
+		ranges = <0x0 0x0 0x10000000 0x10000000
+			  0x1 0x0 0x40000000 0x10000000
+			  0x2 0x0 0x50000000 0x10000000
+			  0x3 0x0 0x60000000 0x10000000>;
+		clocks = <&mck>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ebi_addr>;
+
+		nor: flash@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+
+			atmel,smc-read-mode = "nrd";
+			atmel,smc-write-mode = "nwe";
+			atmel,smc-bus-width = <16>;
+			atmel,smc-ncs-rd-setup-ns = <0>;
+			atmel,smc-ncs-wr-setup-ns = <0>;
+			atmel,smc-nwe-setup-ns = <8>;
+			atmel,smc-nrd-setup-ns = <16>;
+			atmel,smc-ncs-rd-pulse-ns = <84>;
+			atmel,smc-ncs-wr-pulse-ns = <84>;
+			atmel,smc-nrd-pulse-ns = <76>;
+			atmel,smc-nwe-pulse-ns = <76>;
+			atmel,smc-nrd-cycle-ns = <107>;
+			atmel,smc-nwe-cycle-ns = <84>;
+			atmel,smc-tdf-ns = <16>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
new file mode 100644
index 0000000000..4b072c879b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,brcmstb-memc-ddr-rev-b.1.x
+          - brcm,brcmstb-memc-ddr-rev-b.2.0
+          - brcm,brcmstb-memc-ddr-rev-b.2.1
+          - brcm,brcmstb-memc-ddr-rev-b.2.2
+          - brcm,brcmstb-memc-ddr-rev-b.2.3
+          - brcm,brcmstb-memc-ddr-rev-b.2.5
+          - brcm,brcmstb-memc-ddr-rev-b.2.6
+          - brcm,brcmstb-memc-ddr-rev-b.2.7
+          - brcm,brcmstb-memc-ddr-rev-b.2.8
+          - brcm,brcmstb-memc-ddr-rev-b.3.0
+          - brcm,brcmstb-memc-ddr-rev-b.3.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.0
+          - brcm,brcmstb-memc-ddr-rev-c.1.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.2
+          - brcm,brcmstb-memc-ddr-rev-c.1.3
+          - brcm,brcmstb-memc-ddr-rev-c.1.4
+      - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
new file mode 100644
index 0000000000..08cbdcddfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,dpfe-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DDR PHY Front End (DPFE) for Broadcom STB
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Markus Mayer <mmayer@broadcom.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7271-dpfe-cpu
+          - brcm,bcm7268-dpfe-cpu
+      - const: brcm,dpfe-cpu
+
+  reg:
+    items:
+      - description: DCPU register space
+      - description: DCPU data memory space
+      - description: DCPU instruction memory space
+
+  reg-names:
+    items:
+      - const: dpfe-cpu
+      - const: dpfe-dmem
+      - const: dpfe-imem
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dpfe-cpu@f1132000 {
+        compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
+        reg = <0xf1132000 0x180>,
+              <0xf1134000 0x1000>,
+              <0xf1138000 0x4000>;
+        reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
new file mode 100644
index 0000000000..e42aa48870
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda DDR memory controller
+
+description: |
+  The Calxeda DDR memory controller is initialised and programmed by the
+  firmware, but an OS might want to read its registers for error reporting
+  purposes and to learn about the DRAM topology.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - calxeda,hb-ddr-ctrl
+      - calxeda,ecx-2000-ddr-ctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@fff00000 {
+        compatible = "calxeda,hb-ddr-ctrl";
+        reg = <0xfff00000 0x1000>;
+        interrupts = <0 91 4>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
new file mode 100644
index 0000000000..f81fb866e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
new file mode 100644
index 0000000000..34b5bd153f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR channel with chip/rank topology description
+
+description:
+  An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS,
+  CK, etc.) that connect one or more LPDDR chips to a host system. The main
+  purpose of this node is to overall LPDDR topology of the system, including the
+  amount of individual LPDDR chips and the ranks per chip.
+
+maintainers:
+  - Julius Werner <jwerner@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - jedec,lpddr2-channel
+      - jedec,lpddr3-channel
+      - jedec,lpddr4-channel
+      - jedec,lpddr5-channel
+
+  io-width:
+    description:
+      The number of DQ pins in the channel. If this number is different
+      from (a multiple of) the io-width of the LPDDR chip, that means that
+      multiple instances of that type of chip are wired in parallel on this
+      channel (with the channel's DQ pins split up between the different
+      chips, and the CA, CS, etc. pins of the different chips all shorted
+      together).  This means that the total physical memory controlled by a
+      channel is equal to the sum of the densities of each rank on the
+      connected LPDDR chip, times the io-width of the channel divided by
+      the io-width of the LPDDR chip.
+    enum:
+      - 8
+      - 16
+      - 32
+      - 64
+      - 128
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^rank@[0-9]+$":
+    type: object
+    description:
+      Each physical LPDDR chip may have one or more ranks. Ranks are
+      internal but fully independent sub-units of the chip. Each LPDDR bus
+      transaction on the channel targets exactly one rank, based on the
+      state of the CS pins. Different ranks may have different densities and
+      timing requirements.
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr2-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr3-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr4-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr5-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+
+required:
+  - compatible
+  - io-width
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr-channel0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr3-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr3-ff,0100", "jedec,lpddr3";
+        reg = <0>;
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+      };
+    };
+
+    lpddr-channel1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr4-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <0>;
+        density = <4096>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+
+      rank@1 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <1>;
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
new file mode 100644
index 0000000000..30267ce701
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for LPDDR types
+
+description:
+  Different LPDDR types generally use the same properties and only differ in the
+  range of legal values for each. This file defines the common parts that can be
+  reused for each type. Nodes using this schema should generally be nested under
+  an LPDDR channel node.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    description:
+      Compatible strings can be either explicit vendor names and part numbers
+      (e.g. elpida,ECB240ABACN), or generated strings of the form
+      lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID
+      (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are
+      formatted in lower case hexadecimal representation with leading zeroes.
+      The latter form can be useful when LPDDR nodes are created at runtime by
+      boot firmware that doesn't have access to static part number information.
+
+  reg:
+    description:
+      The rank number of this LPDDR rank when used as a subnode to an LPDDR
+      channel.
+    minimum: 0
+    maximum: 3
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 255
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Density in megabits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 3072
+      - 4096
+      - 6144
+      - 8192
+      - 12288
+      - 16384
+      - 24576
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      IO bus width in bits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 8
+      - 16
+      - 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 0000000000..1daa665924
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr2-timings
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tDQSCK-max:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c in pico seconds.
+
+  tDQSCK-max-derated:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+      seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tRAS-max-ns:
+    description: |
+      Row active time in nano seconds.
+
+  tRAS-min:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tZQCL:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Long calibration time in pico seconds.
+
+  tZQCS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Short calibration time in pico seconds.
+
+  tZQinit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Initialization calibration time in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    timings {
+        compatible = "jedec,lpddr2-timings";
+        min-freq = <10000000>;
+        max-freq = <400000000>;
+        tCKESR = <15000>;
+        tDQSCK-max = <5500>;
+        tFAW = <50000>;
+        tRAS-max-ns = <70000>;
+        tRAS-min = <42000>;
+        tRPab = <21000>;
+        tRCD = <18000>;
+        tRRD = <10000>;
+        tRTP = <7500>;
+        tWR = <15000>;
+        tWTR = <7500>;
+        tXP = <7500>;
+        tZQCL = <360000>;
+        tZQCS = <90000>;
+        tZQinit = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
new file mode 100644
index 0000000000..a237bc2592
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - elpida,ECB240ABACN
+              - elpida,B8132B2PB-6D-F
+          - enum:
+              - jedec,lpddr2-nvm
+              - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
+      - items:
+          - pattern: "^lpddr2-[0-9a-f]{2},[0-9a-f]{4}$"
+          - enum:
+              - jedec,lpddr2-nvm
+              - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
+
+  revision-id1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 1 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  revision-id2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 2 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Active bank a to active bank b in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles. Obtained from device datasheet.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      WRITE recovery time in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tRASmin-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row active time in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Four-bank activate window in terms of number of clock cycles. Obtained
+      from device datasheet.
+
+patternProperties:
+  "^lpddr2-timings":
+    $ref: jedec,lpddr2-timings.yaml
+    description: |
+      The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+      "lpddr2-timings" provides AC timing parameters of the device for
+      a given speed-bin. The user may provide the timings for as many
+      speed-bins as is required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    elpida_ECB240ABACN: lpddr2 {
+        compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <1 0>;
+
+        tRPab-min-tck = <3>;
+        tRCD-min-tck = <3>;
+        tWR-min-tck = <3>;
+        tRASmin-min-tck = <3>;
+        tRRD-min-tck = <2>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tCKE-min-tck = <3>;
+        tCKESR-min-tck = <3>;
+        tFAW-min-tck = <8>;
+
+        timings_elpida_ECB240ABACN_400mhz: lpddr2-timings0 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <400000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <7500>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+
+        timings_elpida_ECB240ABACN_200mhz: lpddr2-timings1 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <200000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <10000>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 0000000000..5c6512c1e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr3-timings
+
+  reg:
+    maxItems: 1
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+      Property is deprecated, use max-freq.
+    deprecated: true
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKE:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tMRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode register set command delay in pico seconds.
+
+  tR2R-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+  tRAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRFC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Refresh Cycle time in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRPpb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (single banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tW2W-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tXSR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 0000000000..e328a1195b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,K3QF2F20DB
+          - const: jedec,lpddr3
+      - items:
+          - pattern: "^lpddr3-[0-9a-f]{2},[0-9a-f]{4}$"
+          - const: jedec,lpddr3
+
+  '#address-cells':
+    const: 1
+    deprecated: true
+
+  manufacturer-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Manufacturer ID value read from Mode Register 5.  The property is
+      deprecated, manufacturer should be derived from the compatible.
+    deprecated: true
+
+  '#size-cells':
+    const: 0
+    deprecated: true
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles.
+
+  tDQSCK-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      DQS output data access time from CK_t/CK_c in terms of number of clock
+      cycles.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Four-bank activate window in terms of number of clock cycles.
+
+  tMRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Mode register set command delay in terms of number of clock cycles.
+
+  tR2R-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tRAS-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Row active time in terms of number of clock cycles.
+
+  tRC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles.
+
+  tRFC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Refresh Cycle time in terms of number of clock cycles.
+
+  tRL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+     READ data latency in terms of number of clock cycles.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+
+  tRPpb-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (single banks) in terms of number of clock cycles.
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Active bank A to active bank B in terms of number of clock cycles.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles.
+
+  tW2W-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tWL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE data latency in terms of number of clock cycles.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE recovery time in terms of number of clock cycles.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles.
+
+  tXSR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1023
+    description: |
+      SELF REFRESH exit to next valid command delay in terms of number of clock
+      cycles.
+
+patternProperties:
+  "^timings((-[0-9])+|(@[0-9a-f]+))?$":
+    $ref: jedec,lpddr3-timings.yaml
+    description: |
+      The lpddr3 node may have one or more child nodes with timings.
+      Each timing node provides AC timing parameters of the device for a given
+      speed-bin. The user may provide the timings for as many speed-bins as is
+      required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+        density = <16384>;
+        io-width = <32>;
+
+        tCKE-min-tck = <2>;
+        tCKESR-min-tck = <2>;
+        tDQSCK-min-tck = <5>;
+        tFAW-min-tck = <5>;
+        tMRD-min-tck = <5>;
+        tR2R-C2C-min-tck = <0>;
+        tRAS-min-tck = <5>;
+        tRC-min-tck = <6>;
+        tRCD-min-tck = <3>;
+        tRFC-min-tck = <17>;
+        tRL-min-tck = <14>;
+        tRPab-min-tck = <2>;
+        tRPpb-min-tck = <2>;
+        tRRD-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tW2W-C2C-min-tck = <0>;
+        tWL-min-tck = <8>;
+        tWR-min-tck = <7>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tXSR-min-tck = <12>;
+
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
new file mode 100644
index 0000000000..a078892fec
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR4 SDRAM compliant to JEDEC JESD209-4
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr4-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr4
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr4-ff,0100", "jedec,lpddr4";
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
new file mode 100644
index 0000000000..e441dac5f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR5 SDRAM compliant to JEDEC JESD209-5
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr5-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr5
+
+  serial-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Serial IDs read from Mode Registers 47 through 54. One byte per uint32
+      cell (i.e. <MR47 MR48 MR49 MR50 MR51 MR52 MR53 MR54>).
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 255
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr5-01,0200", "jedec,lpddr5";
+        density = <8192>;
+        io-width = <8>;
+        revision-id = <2 0>;
+        serial-id = <3 1 0 0 0 0 0 0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
new file mode 100644
index 0000000000..10a2d97e5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/exynos-srom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC SROM Controller driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The SROM controller can be used to attach external peripherals. In this case
+  extra properties, describing the bus behind it, should be specified.
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos4210-srom
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Reflects the memory layout with four integer values per bank. Format:
+      <bank-number> 0 <parent address of bank> <size>
+      Up to four banks are supported.
+
+patternProperties:
+  "^.*@[0-3],[a-f0-9]+$":
+    type: object
+    additionalProperties: true
+    description:
+      The actual device nodes should be added as subnodes to the SROMc node.
+      These subnodes, in addition to regular device specification, should
+      contain the following properties, describing configuration
+      of the relevant SROM bank.
+
+    properties:
+      reg:
+        description:
+          Bank number, base address (relative to start of the bank) and size
+          of the memory mapped for the device. Note that base address will be
+          typically 0 as this is the start of the bank.
+        maxItems: 1
+
+      reg-io-width:
+        enum: [1, 2]
+        description:
+          Data width in bytes (1 or 2). If omitted, default of 1 is used.
+
+      samsung,srom-page-mode:
+        description:
+          If page mode is set, 4 data page mode will be configured,
+          else normal (1 data) page mode will be set.
+        type: boolean
+
+      samsung,srom-timing:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          minItems: 6
+          maxItems: 6
+        description: |
+          Array of 6 integers, specifying bank timings in the following order:
+          Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
+          Each value is specified in cycles and has the following meaning
+          and valid range:
+          Tacp: Page mode access cycle at Page mode (0 - 15)
+          Tcah: Address holding time after CSn (0 - 15)
+          Tcoh: Chip selection hold on OEn (0 - 15)
+          Tacc: Access cycle (0 - 31, the actual time is N + 1)
+          Tcos: Chip selection set-up before OEn (0 - 15)
+          Tacs: Address set-up before CSn (0 - 15)
+
+    required:
+      - reg
+      - samsung,srom-timing
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    // Example: basic definition, no banks are configured
+    memory-controller@12560000 {
+        compatible = "samsung,exynos4210-srom";
+        reg = <0x12560000 0x14>;
+    };
+
+  - |
+    // Example: SROMc with SMSC911x ethernet chip on bank 3
+    memory-controller@12570000 {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x04000000 0x20000   // Bank0
+                  1 0 0x05000000 0x20000   // Bank1
+                  2 0 0x06000000 0x20000   // Bank2
+                  3 0 0x07000000 0x20000>; // Bank3
+
+        compatible = "samsung,exynos4210-srom";
+        reg = <0x12570000 0x14>;
+
+        ethernet@3,0 {
+            compatible = "smsc,lan9115";
+            reg = <3 0 0x10000>;     // Bank 3, offset = 0
+            phy-mode = "mii";
+            interrupt-parent = <&gpx0>;
+            interrupts = <5 8>;
+            reg-io-width = <2>;
+            smsc,irq-push-pull;
+            smsc,force-internal-phy;
+
+            samsung,srom-page-mode;
+            samsung,srom-timing = <9 12 1 9 1 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
new file mode 100644
index 0000000000..84f778a995
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DDR memory controller
+
+maintainers:
+  - Borislav Petkov <bp@alien8.de>
+  - York Sun <york.sun@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,qoriq-memory-controller-v4.4
+              - fsl,qoriq-memory-controller-v4.5
+              - fsl,qoriq-memory-controller-v4.7
+              - fsl,qoriq-memory-controller-v5.0
+          - const: fsl,qoriq-memory-controller
+      - enum:
+          - fsl,bsc9132-memory-controller
+          - fsl,mpc8536-memory-controller
+          - fsl,mpc8540-memory-controller
+          - fsl,mpc8541-memory-controller
+          - fsl,mpc8544-memory-controller
+          - fsl,mpc8548-memory-controller
+          - fsl,mpc8555-memory-controller
+          - fsl,mpc8560-memory-controller
+          - fsl,mpc8568-memory-controller
+          - fsl,mpc8569-memory-controller
+          - fsl,mpc8572-memory-controller
+          - fsl,mpc8349-memory-controller
+          - fsl,p1020-memory-controller
+          - fsl,p1021-memory-controller
+          - fsl,p2020-memory-controller
+          - fsl,qoriq-memory-controller
+
+  interrupts:
+    maxItems: 1
+
+  little-endian:
+    description:
+      Specifies little-endian access to registers. If omitted, big-endian will
+      be used.
+    type: boolean
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@2000 {
+        compatible = "fsl,bsc9132-memory-controller";
+        reg = <0x2000 0x1000>;
+        interrupts = <16 2 1 8>;
+    };
+
+  - |
+    memory-controller@8000 {
+        compatible = "fsl,qoriq-memory-controller-v4.7",
+                     "fsl,qoriq-memory-controller";
+        reg = <0x8000 0x1000>;
+        interrupts = <16 2 1 23>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
new file mode 100644
index 0000000000..3be1db30bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  NXP's integrated flash controller (IFC) is an advanced version of the
+  enhanced local bus controller which includes similar programming and signal
+  interfaces with an extended feature set. The IFC provides access to multiple
+  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+  SRAM and other memories where address and data are shared on a bus.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    const: fsl,ifc
+
+  "#address-cells":
+    enum: [2, 3]
+    description: |
+      Should be either two or three.  The first cell is the chipselect
+      number, and the remaining cells are the offset into the chipselect.
+
+  "#size-cells":
+    enum: [1, 2]
+    description: |
+      Either one or two, depending on how large each chipselect can be.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      IFC may have one or two interrupts.  If two interrupt specifiers are
+      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
+      that interrupt reports both types of event.
+
+  little-endian:
+    type: boolean
+    description: |
+      If this property is absent, the big-endian mode will be in use as default
+      for registers.
+
+  ranges:
+    description: |
+      Each range corresponds to a single chipselect, and covers the entire
+      access window as configured.
+
+patternProperties:
+  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    description: |
+      Child device nodes describe the devices connected to IFC such as NOR (e.g.
+      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+      like FPGAs, CPLDs, etc.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@ffe1e000 {
+            compatible = "fsl,ifc";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0x0 0xffe1e000 0 0x2000>;
+            interrupts = <16 2 19 2>;
+            little-endian;
+
+            /* NOR, NAND Flashes and CPLD on board */
+            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
+                     <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+            flash@0,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "cfi-flash";
+                reg = <0x0 0x0 0x2000000>;
+                bank-width = <2>;
+                device-width = <1>;
+
+                partition@0 {
+                    /* 32MB for user data */
+                    reg = <0x0 0x02000000>;
+                    label = "NOR Data";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
new file mode 100644
index 0000000000..519b123116
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/imx8m-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8M DDR Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  The DDRC block is integrated in i.MX8M for interfacing with DDR based
+  memories.
+
+  It supports switching between different frequencies at runtime but during
+  this process RAM itself becomes briefly inaccessible so actual frequency
+  switching is implemented by TF-A code which runs from a SRAM area.
+
+  The Linux driver for the DDRC doesn't even map registers (they're included
+  for the sake of "describing hardware"), it mostly just exposes firmware
+  capabilities through standard Linux mechanism like devfreq and OPP tables.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8mn-ddrc
+          - fsl,imx8mm-ddrc
+          - fsl,imx8mq-ddrc
+      - const: fsl,imx8m-ddrc
+
+  reg:
+    maxItems: 1
+    description:
+      Base address and size of DDRC CTL area.
+      This is not currently mapped by the imx8m-ddrc driver.
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: pll
+      - const: alt
+      - const: apb
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    ddrc: memory-controller@3d400000 {
+        compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+        reg = <0x3d400000 0x400000>;
+        clock-names = "core", "pll", "alt", "apb";
+        clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+                 <&clk IMX8MM_DRAM_PLL>,
+                 <&clk IMX8MM_CLK_DRAM_ALT>,
+                 <&clk IMX8MM_CLK_DRAM_APB>;
+        operating-points-v2 = <&ddrc_opp_table>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
new file mode 100644
index 0000000000..71547eee99
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/mmdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Multi Mode DDR controller (MMDC)
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx6q-mmdc
+      - items:
+          - enum:
+              - fsl,imx6qp-mmdc
+              - fsl,imx6sl-mmdc
+              - fsl,imx6sll-mmdc
+              - fsl,imx6sx-mmdc
+              - fsl,imx6ul-mmdc
+              - fsl,imx7ulp-mmdc
+          - const: fsl,imx6q-mmdc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    memory-controller@21b0000 {
+        compatible = "fsl,imx6q-mmdc";
+        reg = <0x021b0000 0x4000>;
+        clocks = <&clks IMX6QDL_CLK_MMDC_P0_IPG>;
+    };
+
+    memory-controller@21b4000 {
+        compatible = "fsl,imx6q-mmdc";
+        reg = <0x021b4000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
new file mode 100644
index 0000000000..89ebe39790
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 255
+
+  ingenic,nemc-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    description: Specifies the bus width in bits.
+
+  ingenic,nemc-tAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address setup time in nanoseconds.
+
+  ingenic,nemc-tAH:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address hold time in nanoseconds.
+
+  ingenic,nemc-tBP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burst pitch time in nanoseconds.
+
+  ingenic,nemc-tAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address wait time in nanoseconds.
+
+  ingenic,nemc-tSTRV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Static memory recovery time in nanoseconds.
+
+required:
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
new file mode 100644
index 0000000000..b40cec0eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-nemc
+          - ingenic,jz4780-nemc
+      - items:
+          - const: ingenic,jz4725b-nemc
+          - const: ingenic,jz4740-nemc
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  ".*@[0-9]+$":
+    type: object
+    $ref: mc-peripheral-props.yaml#
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/gpio/gpio.h>
+    nemc: memory-controller@13410000 {
+      compatible = "ingenic,jz4780-nemc";
+      reg = <0x13410000 0x10000>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0x1b000000 0x1000000>,
+         <2 0 0x1a000000 0x1000000>,
+         <3 0 0x19000000 0x1000000>,
+         <4 0 0x18000000 0x1000000>,
+         <5 0 0x17000000 0x1000000>,
+         <6 0 0x16000000 0x1000000>;
+
+      clocks = <&cgu JZ4780_CLK_NEMC>;
+
+      ethernet@6 {
+        compatible = "davicom,dm9000";
+        davicom,no-eeprom;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_nemc_cs6>;
+
+        reg = <6 0 1>, /* addr */
+              <6 2 1>; /* data */
+
+        ingenic,nemc-tAS = <15>;
+        ingenic,nemc-tAH = <10>;
+        ingenic,nemc-tBP = <20>;
+        ingenic,nemc-tAW = <50>;
+        ingenic,nemc-tSTRV = <100>;
+
+        reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+        vcc-supply = <&eth0_power>;
+
+        interrupt-parent = <&gpe>;
+        interrupts = <19 4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
new file mode 100644
index 0000000000..3049d6bb0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Expansion Bus Controller
+
+description: |
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: '^bus@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-expansion-bus-controller
+          - intel,ixp43x-expansion-bus-controller
+          - intel,ixp45x-expansion-bus-controller
+          - intel,ixp46x-expansion-bus-controller
+      - const: syscon
+
+  reg:
+    description: Control registers for the expansion bus, these are not
+      inside the memory range handled by the expansion bus.
+    maxItems: 1
+
+  native-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The IXP4xx has a peculiar MMIO access scheme, as it changes
+      the access pattern for words (swizzling) on the bus depending on whether
+      the SoC is running in big-endian or little-endian mode. Thus the
+      registers must always be accessed using native endianness.
+
+  "#address-cells":
+    description: |
+      The first cell is the chip select number.
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+  dma-ranges: true
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    description: Devices attached to chip selects are represented as
+      subnodes.
+    type: object
+    $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - native-endian
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - dma-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus@50000000 {
+        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+        reg = <0xc4000000 0x28>;
+        native-endian;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x50000000 0x01000000>,
+                 <1 0x0 0x51000000 0x01000000>;
+        dma-ranges = <0 0x0 0x50000000 0x01000000>,
+                     <1 0x0 0x51000000 0x01000000>;
+        flash@0,0 {
+            compatible = "intel,ixp4xx-flash", "cfi-flash";
+            bank-width = <2>;
+            reg = <0 0x00000000 0x1000000>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <0>;
+            intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <0>;
+        };
+        serial@1,0 {
+            compatible = "exar,xr16l2551", "ns8250";
+            reg = <1 0x00000000 0x10>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            clock-frequency = <1843200>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
new file mode 100644
index 0000000000..d1479a7b9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Intel IXP4xx Expansion Bus
+
+description:
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  intel,ixp4xx-eb-t1:
+    description: Address timing, extend address phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t2:
+    description: Setup chip select timing, extend setup phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t3:
+    description: Strobe timing, extend strobe phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-t4:
+    description: Hold timing, extend hold phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t5:
+    description: Recovery timing, extend recovery phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-cycle-type:
+    description: The type of cycles to use on the expansion bus for this
+      chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  intel,ixp4xx-eb-byte-access-on-halfword:
+    description: Allow byte read access on half word devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-hpi-hrdy-pol-high:
+    description: Set HPI HRDY polarity to active high when using HPI.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-mux-address-and-data:
+    description: Multiplex address and data on the data bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-ahb-split-transfers:
+    description: Enable AHB split transfers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-write-enable:
+    description: Enable write cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-byte-access:
+    description: Expansion bus uses only 8 bits. The default is to use
+      16 bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
new file mode 100644
index 0000000000..9249624c4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/marvell,mvebu-sdram-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MVEBU SDRAM controller
+
+maintainers:
+  - Jan Luebbe <jlu@pengutronix.de>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-xp-sdram-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@1400 {
+        compatible = "marvell,armada-xp-sdram-controller";
+        reg = <0x1400 0x500>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
new file mode 100644
index 0000000000..8d9dae15ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mc-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a Memory Controller bus.
+
+description:
+  Many Memory Controllers need to add properties to peripheral devices.
+  They could be common properties like reg or they could be controller
+  specific like delay in clock or data lines, etc. These properties need
+  to be defined in the peripheral node because they are per-peripheral
+  and there can be multiple peripherals attached to a controller. All
+  those properties are listed here. The controller specific properties
+  should go in their own separate schema that should be referenced
+  from here.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  reg:
+    description: Bank number, base address and size of the device.
+
+  bank-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bank width of the device, in bytes.
+    enum: [1, 2, 4]
+
+required:
+  - reg
+
+# The controller specific properties go here.
+allOf:
+  - $ref: st,stm32-fmc2-ebi-props.yaml#
+  - $ref: ingenic,nemc-peripherals.yaml#
+  - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
+  - $ref: ti,gpmc-child.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
new file mode 100644
index 0000000000..6ccdaf99c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,mt7621-memc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT7621 SDRAM controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7621-memc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@5000 {
+        compatible = "mediatek,mt7621-memc", "syscon";
+        reg = <0x5000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
new file mode 100644
index 0000000000..2f36ac2360
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMI (Smart Multimedia Interface) Common
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |
+  The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
+
+  MediaTek SMI have two generations of HW architecture, here is the list
+  which generation the SoCs use:
+  generation 1: mt2701 and mt7623.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
+
+  There's slight differences between the two SMI, for generation 2, the
+  register which control the iommu port is at each larb's register base. But
+  for generation 1, the register is at smi ao base(smi always on register
+  base). Besides that, the smi async clock should be prepared and enabled for
+  SMI generation 1 to transform the smi clock into emi clock domain, but that is
+  not needed for SMI generation 2.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-smi-common
+          - mediatek,mt2712-smi-common
+          - mediatek,mt6779-smi-common
+          - mediatek,mt6795-smi-common
+          - mediatek,mt8167-smi-common
+          - mediatek,mt8173-smi-common
+          - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
+          - mediatek,mt8188-smi-common-vdo
+          - mediatek,mt8188-smi-common-vpp
+          - mediatek,mt8192-smi-common
+          - mediatek,mt8195-smi-common-vdo
+          - mediatek,mt8195-smi-common-vpp
+          - mediatek,mt8195-smi-sub-common
+          - mediatek,mt8365-smi-common
+
+      - description: for mt7623
+        items:
+          - const: mediatek,mt7623-smi-common
+          - const: mediatek,mt2701-smi-common
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    description: |
+      apb and smi are mandatory. the async is only for generation 1 smi HW.
+      gals(global async local sync) also is optional, see below.
+    minItems: 2
+    items:
+      - description: apb is Advanced Peripheral Bus clock, It's the clock for
+          setting the register.
+      - description: smi is the clock for transfer data and command.
+      - description: Either asynchronous clock to help transform the smi clock
+          into the emi clock domain on Gen1 h/w, or the path0 clock of gals.
+      - description: gals1 is the path1 clock of gals.
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the smi-common node above. Only for sub-common.
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+allOf:
+  - if:  # only for gen1 HW
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-smi-common
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: async
+
+  - if:  # only for sub common
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-smi-sub-common
+    then:
+      required:
+        - mediatek,smi
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+    else:
+      properties:
+        mediatek,smi: false
+
+  - if:  # for gen2 HW that have gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt6779-smi-common
+            - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
+            - mediatek,mt8192-smi-common
+            - mediatek,mt8195-smi-common-vdo
+            - mediatek,mt8195-smi-common-vpp
+            - mediatek,mt8365-smi-common
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+            - const: gals1
+
+  - if:  # for gen2 HW that don't have gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2712-smi-common
+            - mediatek,mt6795-smi-common
+            - mediatek,mt8167-smi-common
+            - mediatek,mt8173-smi-common
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    smi_common: smi@14022000 {
+            compatible = "mediatek,mt8173-smi-common";
+            reg = <0x14022000 0x1000>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_SMI_COMMON>,
+                     <&mmsys CLK_MM_SMI_COMMON>;
+            clock-names = "apb", "smi";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
new file mode 100644
index 0000000000..2381660b32
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,smi-larb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMI (Smart Multimedia Interface) Local Arbiter
+
+maintainers:
+  - Yong Wu <yong.wu@mediatek.com>
+
+description: |
+  The hardware block diagram please check bindings/iommu/mediatek,iommu.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-smi-larb
+          - mediatek,mt2712-smi-larb
+          - mediatek,mt6779-smi-larb
+          - mediatek,mt6795-smi-larb
+          - mediatek,mt8167-smi-larb
+          - mediatek,mt8173-smi-larb
+          - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
+          - mediatek,mt8188-smi-larb
+          - mediatek,mt8192-smi-larb
+          - mediatek,mt8195-smi-larb
+
+      - description: for mt7623
+        items:
+          - const: mediatek,mt7623-smi-larb
+          - const: mediatek,mt2701-smi-larb
+
+      - items:
+          - const: mediatek,mt8365-smi-larb
+          - const: mediatek,mt8186-smi-larb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: |
+      apb and smi are mandatory. gals(global async local sync) is optional.
+    minItems: 2
+    items:
+      - description: apb is Advanced Peripheral Bus clock, It's the clock for
+          setting the register.
+      - description: smi is the clock for transfer data and command.
+      - description: the clock for gals.
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the smi_common node.
+
+  mediatek,larb-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: the hardware id of this larb. It's only required when this
+      hardware id is not consecutive from its M4U point of view.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - if:  # HW has gals
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
+            - mediatek,mt8188-smi-larb
+            - mediatek,mt8195-smi-larb
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: apb
+            - const: smi
+            - const: gals
+
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-smi-larb
+              - mediatek,mt2712-smi-larb
+              - mediatek,mt6779-smi-larb
+              - mediatek,mt8186-smi-larb
+              - mediatek,mt8188-smi-larb
+              - mediatek,mt8192-smi-larb
+              - mediatek,mt8195-smi-larb
+
+    then:
+      required:
+        - mediatek,larb-id
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    larb1: larb@16010000 {
+      compatible = "mediatek,mt8173-smi-larb";
+      reg = <0x16010000 0x1000>;
+      mediatek,smi = <&smi_common>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&vdecsys CLK_VDEC_CKEN>,
+               <&vdecsys CLK_VDEC_LARB_CKEN>;
+      clock-names = "apb", "smi";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
new file mode 100644
index 0000000000..8b9388cc1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
@@ -0,0 +1,177 @@
+Device tree bindings for MVEBU Device Bus controllers
+
+The Device Bus controller available in some Marvell's SoC allows to control
+different types of standard memory and I/O devices such as NOR, NAND, and FPGA.
+The actual devices are instantiated from the child nodes of a Device Bus node.
+
+Required properties:
+
+ - compatible:          Armada 370/XP SoC are supported using the
+                        "marvell,mvebu-devbus" compatible string.
+
+                        Orion5x SoC are supported using the
+                        "marvell,orion-devbus" compatible string.
+
+ - reg:                 A resource specifier for the register space.
+                        This is the base address of a chip select within
+			the controller's register space.
+                        (see the example below)
+
+ - #address-cells:      Must be set to 1
+ - #size-cells:         Must be set to 1
+ - ranges:              Must be set up to reflect the memory layout with four
+                        integer values for each chip-select line in use:
+                        0 <physical address of mapping> <size>
+
+Optional properties:
+
+ - devbus,keep-config   This property can optionally be used to keep
+                        using the timing parameters set by the
+                        bootloader. It makes all the timing properties
+                        described below unused.
+
+Timing properties for child nodes:
+
+Read parameters:
+
+ - devbus,turn-off-ps:  Defines the time during which the controller does not
+                        drive the AD bus after the completion of a device read.
+                        This prevents contentions on the Device Bus after a read
+                        cycle from a slow device.
+                        Mandatory, except if devbus,keep-config is used.
+
+ - devbus,bus-width:    Defines the bus width, in bits (e.g. <16>).
+                        Mandatory, except if devbus,keep-config is used.
+
+ - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle,
+                        to read data sample. This parameter is useful for
+                        synchronous pipelined devices, where the address
+                        precedes the read data by one or two cycles.
+                        Mandatory, except if devbus,keep-config is used.
+
+ - devbus,acc-first-ps: Defines the time delay from the negation of
+                        ALE[0] to the cycle that the first read data is sampled
+                        by the controller.
+                        Mandatory, except if devbus,keep-config is used.
+
+ - devbus,acc-next-ps:  Defines the time delay between the cycle that
+                        samples data N and the cycle that samples data N+1
+                        (in burst accesses).
+                        Mandatory, except if devbus,keep-config is used.
+
+ - devbus,rd-setup-ps:  Defines the time delay between DEV_CSn assertion to
+			DEV_OEn assertion. If set to 0 (default),
+                        DEV_OEn and DEV_CSn are asserted at the same cycle.
+                        This parameter has no affect on <acc-first-ps> parameter
+                        (no affect on first data sample). Set <rd-setup-ps>
+                        to a value smaller than <acc-first-ps>.
+                        Mandatory for "marvell,mvebu-devbus" compatible string,
+                        except if devbus,keep-config is used.
+
+ - devbus,rd-hold-ps:   Defines the time between the last data sample to the
+			de-assertion of DEV_CSn. If set to 0 (default),
+			DEV_OEn and DEV_CSn are de-asserted at the same cycle
+			(the cycle of the last data sample).
+                        This parameter has no affect on DEV_OEn de-assertion.
+                        DEV_OEn is always de-asserted the next cycle after
+                        last data sampled. Also this parameter has no
+                        affect on <turn-off-ps> parameter.
+                        Set <rd-hold-ps> to a value smaller than <turn-off-ps>.
+                        Mandatory for "marvell,mvebu-devbus" compatible string,
+                        except if devbus,keep-config is used.
+
+Write parameters:
+
+ - devbus,ale-wr-ps:    Defines the time delay from the ALE[0] negation cycle
+			to the DEV_WEn assertion.
+                        Mandatory.
+
+ - devbus,wr-low-ps:    Defines the time during which DEV_WEn is active.
+                        A[2:0] and Data are kept valid as long as DEV_WEn
+                        is active. This parameter defines the setup time of
+                        address and data to DEV_WEn rise.
+                        Mandatory.
+
+ - devbus,wr-high-ps:   Defines the time during which DEV_WEn is kept
+                        inactive (high) between data beats of a burst write.
+                        DEV_A[2:0] and Data are kept valid (do not toggle) for
+                        <wr-high-ps> - <tick> ps.
+			This parameter defines the hold time of address and
+			data after DEV_WEn rise.
+                        Mandatory.
+
+ - devbus,sync-enable: Synchronous device enable.
+                       1: True
+                       0: False
+                       Mandatory for "marvell,mvebu-devbus" compatible string,
+                       except if devbus,keep-config is used.
+
+An example for an Armada XP GP board, with a 16 MiB NOR device as child
+is showed below. Note that the Device Bus driver is in charge of allocating
+the mbus address decoding window for each of its child devices.
+The window is created using the chip select specified in the child
+device node together with the base address and size specified in the ranges
+property. For instance, in the example below the allocated decoding window
+will start at base address 0xf0000000, with a size 0x1000000 (16 MiB)
+for chip select 0 (a.k.a DEV_BOOTCS).
+
+This address window handling is done in this mvebu-devbus only as a temporary
+solution. It will be removed when the support for mbus device tree binding is
+added.
+
+The reg property implicitly specifies the chip select as this:
+
+  0x10400: DEV_BOOTCS
+  0x10408: DEV_CS0
+  0x10410: DEV_CS1
+  0x10418: DEV_CS2
+  0x10420: DEV_CS3
+
+Example:
+
+	devbus-bootcs@d0010400 {
+		ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf0000000, size 0x1000000 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Device Bus parameters are required */
+
+		/* Read parameters */
+		devbus,bus-width    = <8>;
+		devbus,turn-off-ps  = <60000>;
+		devbus,badr-skew-ps = <0>;
+		devbus,acc-first-ps = <124000>;
+		devbus,acc-next-ps  = <248000>;
+		devbus,rd-setup-ps  = <0>;
+		devbus,rd-hold-ps   = <0>;
+
+		/* Write parameters */
+		devbus,sync-enable = <0>;
+		devbus,wr-high-ps  = <60000>;
+		devbus,wr-low-ps   = <60000>;
+		devbus,ale-wr-ps   = <60000>;
+
+		flash@0 {
+			compatible = "cfi-flash";
+
+			/* 16 MiB */
+			reg = <0 0x1000000>;
+			bank-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * We split the 16 MiB in two partitions,
+			 * just as an example.
+			 */
+			partition@0 {
+				label = "First";
+				reg = <0 0x800000>;
+			};
+
+			partition@800000 {
+				label = "Second";
+				reg = <0x800000 0x800000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
new file mode 100644
index 0000000000..ac1a5a1774
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Memory Controller
+
+maintainers:
+  - Marvin Lin <kflin@nuvoton.com>
+  - Stanley Chu <yschu@nuvoton.com>
+
+description: |
+  The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction
+  check).
+
+  The memory controller supports single bit error correction, double bit error
+  detection (in-line ECC in which a section (1/8th) of the memory device used to
+  store data is used for ECC storage).
+
+  Note, the bootloader must configure ECC mode for the memory controller.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-memory-controller
+      - nuvoton,npcm845-memory-controller
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mc: memory-controller@f0824000 {
+        compatible = "nuvoton,npcm750-memory-controller";
+        reg = <0xf0824000 0x1000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
new file mode 100644
index 0000000000..f5f03bf364
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -0,0 +1,550 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra124-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 SoC External Memory Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from the memory controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra124-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: external memory clock
+
+  clock-names:
+    items:
+      - const: emc
+
+  "#interconnect-cells":
+    const: 0
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the memory controller node
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    additionalProperties: false
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,emc-auto-cal-config:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG register for this set of
+              timings
+
+          nvidia,emc-auto-cal-config2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG2 register for this set of
+              timings
+
+          nvidia,emc-auto-cal-config3:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG3 register for this set of
+              timings
+
+          nvidia,emc-auto-cal-interval:
+            description:
+              pad calibration interval in microseconds
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 2097151
+
+          nvidia,emc-bgbias-ctl0:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_BGBIAS_CTL0 register for this set of timings
+
+          nvidia,emc-cfg:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CFG register for this set of timings
+
+          nvidia,emc-cfg-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CFG_2 register for this set of timings
+
+          nvidia,emc-ctt-term-ctrl:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CTT_TERM_CTRL register for this set of timings
+
+          nvidia,emc-mode-1:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW register for this set of timings
+
+          nvidia,emc-mode-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW2 register for this set of timings
+
+          nvidia,emc-mode-4:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW4 register for this set of timings
+
+          nvidia,emc-mode-reset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              reset value of the EMC_MRS register for this set of timings
+
+          nvidia,emc-mrs-wait-cnt:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMR_MRS_WAIT_CNT register for this set of timings
+
+          nvidia,emc-sel-dpd-ctrl:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_SEL_DPD_CTRL register for this set of timings
+
+          nvidia,emc-xm2dqspadctrl2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_XM2DQSPADCTRL2 register for this set of timings
+
+          nvidia,emc-zcal-cnt-long:
+            description:
+              number of EMC clocks to wait before issuing any commands after
+              clock change
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 1023
+
+          nvidia,emc-zcal-interval:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_ZCAL_INTERVAL register for this set of timings
+
+          nvidia,emc-configuration:
+            description:
+              EMC timing characterization data. These are the registers (see
+              section "15.6.2 EMC Registers" in the TRM) whose values need to
+              be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: EMC_RC
+              - description: EMC_RFC
+              - description: EMC_RFC_SLR
+              - description: EMC_RAS
+              - description: EMC_RP
+              - description: EMC_R2W
+              - description: EMC_W2R
+              - description: EMC_R2P
+              - description: EMC_W2P
+              - description: EMC_RD_RCD
+              - description: EMC_WR_RCD
+              - description: EMC_RRD
+              - description: EMC_REXT
+              - description: EMC_WEXT
+              - description: EMC_WDV
+              - description: EMC_WDV_MASK
+              - description: EMC_QUSE
+              - description: EMC_QUSE_WIDTH
+              - description: EMC_IBDLY
+              - description: EMC_EINPUT
+              - description: EMC_EINPUT_DURATION
+              - description: EMC_PUTERM_EXTRA
+              - description: EMC_PUTERM_WIDTH
+              - description: EMC_PUTERM_ADJ
+              - description: EMC_CDB_CNTL_1
+              - description: EMC_CDB_CNTL_2
+              - description: EMC_CDB_CNTL_3
+              - description: EMC_QRST
+              - description: EMC_QSAFE
+              - description: EMC_RDV
+              - description: EMC_RDV_MASK
+              - description: EMC_REFRESH
+              - description: EMC_BURST_REFRESH_NUM
+              - description: EMC_PRE_REFRESH_REQ_CNT
+              - description: EMC_PDEX2WR
+              - description: EMC_PDEX2RD
+              - description: EMC_PCHG2PDEN
+              - description: EMC_ACT2PDEN
+              - description: EMC_AR2PDEN
+              - description: EMC_RW2PDEN
+              - description: EMC_TXSR
+              - description: EMC_TXSRDLL
+              - description: EMC_TCKE
+              - description: EMC_TCKESR
+              - description: EMC_TPD
+              - description: EMC_TFAW
+              - description: EMC_TRPAB
+              - description: EMC_TCLKSTABLE
+              - description: EMC_TCLKSTOP
+              - description: EMC_TREFBW
+              - description: EMC_FBIO_CFG6
+              - description: EMC_ODT_WRITE
+              - description: EMC_ODT_READ
+              - description: EMC_FBIO_CFG5
+              - description: EMC_CFG_DIG_DLL
+              - description: EMC_CFG_DIG_DLL_PERIOD
+              - description: EMC_DLL_XFORM_DQS0
+              - description: EMC_DLL_XFORM_DQS1
+              - description: EMC_DLL_XFORM_DQS2
+              - description: EMC_DLL_XFORM_DQS3
+              - description: EMC_DLL_XFORM_DQS4
+              - description: EMC_DLL_XFORM_DQS5
+              - description: EMC_DLL_XFORM_DQS6
+              - description: EMC_DLL_XFORM_DQS7
+              - description: EMC_DLL_XFORM_DQS8
+              - description: EMC_DLL_XFORM_DQS9
+              - description: EMC_DLL_XFORM_DQS10
+              - description: EMC_DLL_XFORM_DQS11
+              - description: EMC_DLL_XFORM_DQS12
+              - description: EMC_DLL_XFORM_DQS13
+              - description: EMC_DLL_XFORM_DQS14
+              - description: EMC_DLL_XFORM_DQS15
+              - description: EMC_DLL_XFORM_QUSE0
+              - description: EMC_DLL_XFORM_QUSE1
+              - description: EMC_DLL_XFORM_QUSE2
+              - description: EMC_DLL_XFORM_QUSE3
+              - description: EMC_DLL_XFORM_QUSE4
+              - description: EMC_DLL_XFORM_QUSE5
+              - description: EMC_DLL_XFORM_QUSE6
+              - description: EMC_DLL_XFORM_QUSE7
+              - description: EMC_DLL_XFORM_ADDR0
+              - description: EMC_DLL_XFORM_ADDR1
+              - description: EMC_DLL_XFORM_ADDR2
+              - description: EMC_DLL_XFORM_ADDR3
+              - description: EMC_DLL_XFORM_ADDR4
+              - description: EMC_DLL_XFORM_ADDR5
+              - description: EMC_DLL_XFORM_QUSE8
+              - description: EMC_DLL_XFORM_QUSE9
+              - description: EMC_DLL_XFORM_QUSE10
+              - description: EMC_DLL_XFORM_QUSE11
+              - description: EMC_DLL_XFORM_QUSE12
+              - description: EMC_DLL_XFORM_QUSE13
+              - description: EMC_DLL_XFORM_QUSE14
+              - description: EMC_DLL_XFORM_QUSE15
+              - description: EMC_DLI_TRIM_TXDQS0
+              - description: EMC_DLI_TRIM_TXDQS1
+              - description: EMC_DLI_TRIM_TXDQS2
+              - description: EMC_DLI_TRIM_TXDQS3
+              - description: EMC_DLI_TRIM_TXDQS4
+              - description: EMC_DLI_TRIM_TXDQS5
+              - description: EMC_DLI_TRIM_TXDQS6
+              - description: EMC_DLI_TRIM_TXDQS7
+              - description: EMC_DLI_TRIM_TXDQS8
+              - description: EMC_DLI_TRIM_TXDQS9
+              - description: EMC_DLI_TRIM_TXDQS10
+              - description: EMC_DLI_TRIM_TXDQS11
+              - description: EMC_DLI_TRIM_TXDQS12
+              - description: EMC_DLI_TRIM_TXDQS13
+              - description: EMC_DLI_TRIM_TXDQS14
+              - description: EMC_DLI_TRIM_TXDQS15
+              - description: EMC_DLL_XFORM_DQ0
+              - description: EMC_DLL_XFORM_DQ1
+              - description: EMC_DLL_XFORM_DQ2
+              - description: EMC_DLL_XFORM_DQ3
+              - description: EMC_DLL_XFORM_DQ4
+              - description: EMC_DLL_XFORM_DQ5
+              - description: EMC_DLL_XFORM_DQ6
+              - description: EMC_DLL_XFORM_DQ7
+              - description: EMC_XM2CMDPADCTRL
+              - description: EMC_XM2CMDPADCTRL4
+              - description: EMC_XM2CMDPADCTRL5
+              - description: EMC_XM2DQPADCTRL2
+              - description: EMC_XM2DQPADCTRL3
+              - description: EMC_XM2CLKPADCTRL
+              - description: EMC_XM2CLKPADCTRL2
+              - description: EMC_XM2COMPPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL2
+              - description: EMC_XM2VTTGENPADCTRL3
+              - description: EMC_XM2DQSPADCTRL3
+              - description: EMC_XM2DQSPADCTRL4
+              - description: EMC_XM2DQSPADCTRL5
+              - description: EMC_XM2DQSPADCTRL6
+              - description: EMC_DSR_VTTGEN_DRV
+              - description: EMC_TXDSRVTTGEN
+              - description: EMC_FBIO_SPARE
+              - description: EMC_ZCAL_WAIT_CNT
+              - description: EMC_MRS_WAIT_CNT2
+              - description: EMC_CTT
+              - description: EMC_CTT_DURATION
+              - description: EMC_CFG_PIPE
+              - description: EMC_DYN_SELF_REF_CONTROL
+              - description: EMC_QPOP
+
+        required:
+          - clock-frequency
+          - nvidia,emc-auto-cal-config
+          - nvidia,emc-auto-cal-config2
+          - nvidia,emc-auto-cal-config3
+          - nvidia,emc-auto-cal-interval
+          - nvidia,emc-bgbias-ctl0
+          - nvidia,emc-cfg
+          - nvidia,emc-cfg-2
+          - nvidia,emc-ctt-term-ctrl
+          - nvidia,emc-mode-1
+          - nvidia,emc-mode-2
+          - nvidia,emc-mode-4
+          - nvidia,emc-mode-reset
+          - nvidia,emc-mrs-wait-cnt
+          - nvidia,emc-sel-dpd-ctrl
+          - nvidia,emc-xm2dqspadctrl2
+          - nvidia,emc-zcal-cnt-long
+          - nvidia,emc-zcal-interval
+          - nvidia,emc-configuration
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mc: memory-controller@70019000 {
+        compatible = "nvidia,tegra124-mc";
+        reg = <0x70019000 0x1000>;
+        clocks = <&tegra_car TEGRA124_CLK_MC>;
+        clock-names = "mc";
+
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
+
+    external-memory-controller@7001b000 {
+        compatible = "nvidia,tegra124-emc";
+        reg = <0x7001b000 0x1000>;
+        clocks = <&car TEGRA124_CLK_EMC>;
+        clock-names = "emc";
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+
+        emc-timings-0 {
+            nvidia,ram-code = <3>;
+
+            timing-0 {
+                clock-frequency = <12750000>;
+
+                nvidia,emc-auto-cal-config = <0xa1430000>;
+                nvidia,emc-auto-cal-config2 = <0x00000000>;
+                nvidia,emc-auto-cal-config3 = <0x00000000>;
+                nvidia,emc-auto-cal-interval = <0x001fffff>;
+                nvidia,emc-bgbias-ctl0 = <0x00000008>;
+                nvidia,emc-cfg = <0x73240000>;
+                nvidia,emc-cfg-2 = <0x000008c5>;
+                nvidia,emc-ctt-term-ctrl = <0x00000802>;
+                nvidia,emc-mode-1 = <0x80100003>;
+                nvidia,emc-mode-2 = <0x80200008>;
+                nvidia,emc-mode-4 = <0x00000000>;
+                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+                nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+                nvidia,emc-zcal-cnt-long = <0x00000042>;
+                nvidia,emc-zcal-interval = <0x00000000>;
+
+                nvidia,emc-configuration = <
+                    0x00000000 /* EMC_RC */
+                    0x00000003 /* EMC_RFC */
+                    0x00000000 /* EMC_RFC_SLR */
+                    0x00000000 /* EMC_RAS */
+                    0x00000000 /* EMC_RP */
+                    0x00000004 /* EMC_R2W */
+                    0x0000000a /* EMC_W2R */
+                    0x00000003 /* EMC_R2P */
+                    0x0000000b /* EMC_W2P */
+                    0x00000000 /* EMC_RD_RCD */
+                    0x00000000 /* EMC_WR_RCD */
+                    0x00000003 /* EMC_RRD */
+                    0x00000003 /* EMC_REXT */
+                    0x00000000 /* EMC_WEXT */
+                    0x00000006 /* EMC_WDV */
+                    0x00000006 /* EMC_WDV_MASK */
+                    0x00000006 /* EMC_QUSE */
+                    0x00000002 /* EMC_QUSE_WIDTH */
+                    0x00000000 /* EMC_IBDLY */
+                    0x00000005 /* EMC_EINPUT */
+                    0x00000005 /* EMC_EINPUT_DURATION */
+                    0x00010000 /* EMC_PUTERM_EXTRA */
+                    0x00000003 /* EMC_PUTERM_WIDTH */
+                    0x00000000 /* EMC_PUTERM_ADJ */
+                    0x00000000 /* EMC_CDB_CNTL_1 */
+                    0x00000000 /* EMC_CDB_CNTL_2 */
+                    0x00000000 /* EMC_CDB_CNTL_3 */
+                    0x00000004 /* EMC_QRST */
+                    0x0000000c /* EMC_QSAFE */
+                    0x0000000d /* EMC_RDV */
+                    0x0000000f /* EMC_RDV_MASK */
+                    0x00000060 /* EMC_REFRESH */
+                    0x00000000 /* EMC_BURST_REFRESH_NUM */
+                    0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+                    0x00000002 /* EMC_PDEX2WR */
+                    0x00000002 /* EMC_PDEX2RD */
+                    0x00000001 /* EMC_PCHG2PDEN */
+                    0x00000000 /* EMC_ACT2PDEN */
+                    0x00000007 /* EMC_AR2PDEN */
+                    0x0000000f /* EMC_RW2PDEN */
+                    0x00000005 /* EMC_TXSR */
+                    0x00000005 /* EMC_TXSRDLL */
+                    0x00000004 /* EMC_TCKE */
+                    0x00000005 /* EMC_TCKESR */
+                    0x00000004 /* EMC_TPD */
+                    0x00000000 /* EMC_TFAW */
+                    0x00000000 /* EMC_TRPAB */
+                    0x00000005 /* EMC_TCLKSTABLE */
+                    0x00000005 /* EMC_TCLKSTOP */
+                    0x00000064 /* EMC_TREFBW */
+                    0x00000000 /* EMC_FBIO_CFG6 */
+                    0x00000000 /* EMC_ODT_WRITE */
+                    0x00000000 /* EMC_ODT_READ */
+                    0x106aa298 /* EMC_FBIO_CFG5 */
+                    0x002c00a0 /* EMC_CFG_DIG_DLL */
+                    0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+                    0x00064000 /* EMC_DLL_XFORM_DQS0 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS1 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS2 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS3 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS4 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS5 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS6 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS7 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS8 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS9 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS10 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS11 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS12 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS13 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS14 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS15 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+                    0x10000280 /* EMC_XM2CMDPADCTRL */
+                    0x00000000 /* EMC_XM2CMDPADCTRL4 */
+                    0x00111111 /* EMC_XM2CMDPADCTRL5 */
+                    0x00000000 /* EMC_XM2DQPADCTRL2 */
+                    0x00000000 /* EMC_XM2DQPADCTRL3 */
+                    0x77ffc081 /* EMC_XM2CLKPADCTRL */
+                    0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+                    0x81f1f108 /* EMC_XM2COMPPADCTRL */
+                    0x07070004 /* EMC_XM2VTTGENPADCTRL */
+                    0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+                    0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+                    0x51451400 /* EMC_XM2DQSPADCTRL3 */
+                    0x00514514 /* EMC_XM2DQSPADCTRL4 */
+                    0x00514514 /* EMC_XM2DQSPADCTRL5 */
+                    0x51451400 /* EMC_XM2DQSPADCTRL6 */
+                    0x0000003f /* EMC_DSR_VTTGEN_DRV */
+                    0x00000007 /* EMC_TXDSRVTTGEN */
+                    0x00000000 /* EMC_FBIO_SPARE */
+                    0x00000042 /* EMC_ZCAL_WAIT_CNT */
+                    0x000e000e /* EMC_MRS_WAIT_CNT2 */
+                    0x00000000 /* EMC_CTT */
+                    0x00000003 /* EMC_CTT_DURATION */
+                    0x0000f2f3 /* EMC_CFG_PIPE */
+                    0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+                    0x0000000a /* EMC_QPOP */
+                >;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
new file mode 100644
index 0000000000..7b18b4d11e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra124-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 SoC Memory Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  Tegra124 SoC features a hybrid 2x32-bit / 1x64-bit memory controller.
+  These are interleaved to provide high performance with the load shared across
+  two memory channels. The Tegra124 Memory Controller handles memory requests
+  from internal clients and arbitrates among them to allocate memory bandwidth
+  for DDR3L and LPDDR3 SDRAMs.
+
+properties:
+  compatible:
+    const: nvidia,tegra124-mc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mc
+
+  interrupts:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  "#iommu-cells":
+    const: 1
+
+  "#interconnect-cells":
+    const: 1
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value of RAM_CODE this timing set is used for.
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              Memory clock rate in Hz.
+            minimum: 1000000
+            maximum: 1066000000
+
+          nvidia,emem-configuration:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description: |
+              Values to be written to the EMEM register block. See section
+              "15.6.1 MC Registers" in the TRM.
+            items:
+              - description: MC_EMEM_ARB_CFG
+              - description: MC_EMEM_ARB_OUTSTANDING_REQ
+              - description: MC_EMEM_ARB_TIMING_RCD
+              - description: MC_EMEM_ARB_TIMING_RP
+              - description: MC_EMEM_ARB_TIMING_RC
+              - description: MC_EMEM_ARB_TIMING_RAS
+              - description: MC_EMEM_ARB_TIMING_FAW
+              - description: MC_EMEM_ARB_TIMING_RRD
+              - description: MC_EMEM_ARB_TIMING_RAP2PRE
+              - description: MC_EMEM_ARB_TIMING_WAP2PRE
+              - description: MC_EMEM_ARB_TIMING_R2R
+              - description: MC_EMEM_ARB_TIMING_W2W
+              - description: MC_EMEM_ARB_TIMING_R2W
+              - description: MC_EMEM_ARB_TIMING_W2R
+              - description: MC_EMEM_ARB_DA_TURNS
+              - description: MC_EMEM_ARB_DA_COVERS
+              - description: MC_EMEM_ARB_MISC0
+              - description: MC_EMEM_ARB_MISC1
+              - description: MC_EMEM_ARB_RING1_THROTTLE
+
+        required:
+          - clock-frequency
+          - nvidia,emem-configuration
+
+        additionalProperties: false
+
+    required:
+      - nvidia,ram-code
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#reset-cells"
+  - "#iommu-cells"
+  - "#interconnect-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@70019000 {
+        compatible = "nvidia,tegra124-mc";
+        reg = <0x70019000 0x1000>;
+        clocks = <&tegra_car 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+
+        emc-timings-3 {
+            nvidia,ram-code = <3>;
+
+            timing-12750000 {
+                clock-frequency = <12750000>;
+
+                nvidia,emem-configuration = <
+                    0x40040001 /* MC_EMEM_ARB_CFG */
+                    0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+                    0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+                    0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+                    0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+                    0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+                    0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+                    0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+                    0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+                    0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+                    0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+                    0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+                    0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+                    0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+                    0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+                    0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+                    0x77e30303 /* MC_EMEM_ARB_MISC0 */
+                    0x70000f03 /* MC_EMEM_ARB_MISC1 */
+                    0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+                >;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
new file mode 100644
index 0000000000..935d63d181
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) SoC Memory Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The NVIDIA Tegra186 SoC features a 128 bit memory controller that is split
+  into four 32 bit channels to support LPDDR4 with x16 subpartitions. The MC
+  handles memory requests for 40-bit virtual addresses from internal clients
+  and arbitrates among them to allocate memory bandwidth.
+
+  Up to 15 GiB of physical memory can be supported. Security features such as
+  encryption of traffic to and from DRAM via general security apertures are
+  available for video and other secure applications, as well as DRAM ECC for
+  automotive safety applications (single bit error correction and double bit
+  error detection).
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra186-mc
+          - nvidia,tegra194-mc
+          - nvidia,tegra234-mc
+
+  reg:
+    minItems: 6
+    maxItems: 18
+
+  reg-names:
+    minItems: 6
+    maxItems: 18
+
+  interrupts:
+    items:
+      - description: MC general interrupt
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  dma-ranges: true
+
+  "#interconnect-cells":
+    const: 1
+
+patternProperties:
+  "^external-memory-controller@[0-9a-f]+$":
+    description:
+      The bulk of the work involved in controlling the external memory
+      controller on NVIDIA Tegra186 and later is performed on the BPMP. This
+      coprocessor exposes the EMC clock that is used to set the frequency at
+      which the external memory is clocked and a remote procedure call that
+      can be used to obtain the set of available frequencies.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nvidia,tegra186-emc
+              - nvidia,tegra194-emc
+              - nvidia,tegra234-emc
+
+      reg:
+        minItems: 1
+        maxItems: 2
+
+      interrupts:
+        items:
+          - description: EMC general interrupt
+
+      clocks:
+        items:
+          - description: external memory clock
+
+      clock-names:
+        items:
+          - const: emc
+
+      "#interconnect-cells":
+        const: 0
+
+      nvidia,bpmp:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          phandle of the node representing the BPMP
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra186-emc
+        then:
+          properties:
+            reg:
+              maxItems: 1
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra194-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra234-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+      - clock-names
+      - "#interconnect-cells"
+      - nvidia,bpmp
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra186-mc
+    then:
+      properties:
+        reg:
+          maxItems: 6
+          description: 5 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra234-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@2c00000 {
+            compatible = "nvidia,tegra186-mc";
+            reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+                  <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+                  <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+                  <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+                  <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+                  <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+            reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
+            interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+            /*
+             * Memory clients have access to all 40 bits that the memory
+             * controller can address.
+             */
+            dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+            external-memory-controller@2c60000 {
+                compatible = "nvidia,tegra186-emc";
+                reg = <0x0 0x02c60000 0x0 0x50000>;
+                interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&bpmp TEGRA186_CLK_EMC>;
+                clock-names = "emc";
+
+                #interconnect-cells = <0>;
+
+                nvidia,bpmp = <&bpmp>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
new file mode 100644
index 0000000000..f54e553e6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SoC External Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The External Memory Controller (EMC) interfaces with the off-chip SDRAM to
+  service the request stream sent from Memory Controller. The EMC also has
+  various performance-affecting settings beyond the obvious SDRAM configuration
+  parameters and initialization settings. Tegra20 EMC supports multiple JEDEC
+  standard protocols: DDR1, LPDDR2 and DDR2.
+
+properties:
+  compatible:
+    const: nvidia,tegra20-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interconnect-cells":
+    const: 0
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the Memory Controller node.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC process ID mask.
+
+  nvidia,use-ram-code:
+    type: boolean
+    description:
+      If present, the emc-tables@ sub-nodes will be addressed.
+
+$defs:
+  emc-table:
+    type: object
+    properties:
+      compatible:
+        const: nvidia,tegra20-emc-table
+
+      clock-frequency:
+        description:
+          Memory clock rate in kHz.
+        minimum: 1000
+        maximum: 900000
+
+      reg:
+        maxItems: 1
+        description:
+          Either an opaque enumerator to tell different tables apart, or
+          the valid frequency for which the table should be used (in kHz).
+
+      nvidia,emc-registers:
+        description:
+          EMC timing characterization data. These are the registers
+          (see section "15.4.1 EMC Registers" in the TRM) whose values
+          need to be specified, according to the board documentation.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: EMC_RC
+          - description: EMC_RFC
+          - description: EMC_RAS
+          - description: EMC_RP
+          - description: EMC_R2W
+          - description: EMC_W2R
+          - description: EMC_R2P
+          - description: EMC_W2P
+          - description: EMC_RD_RCD
+          - description: EMC_WR_RCD
+          - description: EMC_RRD
+          - description: EMC_REXT
+          - description: EMC_WDV
+          - description: EMC_QUSE
+          - description: EMC_QRST
+          - description: EMC_QSAFE
+          - description: EMC_RDV
+          - description: EMC_REFRESH
+          - description: EMC_BURST_REFRESH_NUM
+          - description: EMC_PDEX2WR
+          - description: EMC_PDEX2RD
+          - description: EMC_PCHG2PDEN
+          - description: EMC_ACT2PDEN
+          - description: EMC_AR2PDEN
+          - description: EMC_RW2PDEN
+          - description: EMC_TXSR
+          - description: EMC_TCKE
+          - description: EMC_TFAW
+          - description: EMC_TRPAB
+          - description: EMC_TCLKSTABLE
+          - description: EMC_TCLKSTOP
+          - description: EMC_TREFBW
+          - description: EMC_QUSE_EXTRA
+          - description: EMC_FBIO_CFG6
+          - description: EMC_ODT_WRITE
+          - description: EMC_ODT_READ
+          - description: EMC_FBIO_CFG5
+          - description: EMC_CFG_DIG_DLL
+          - description: EMC_DLL_XFORM_DQS
+          - description: EMC_DLL_XFORM_QUSE
+          - description: EMC_ZCAL_REF_CNT
+          - description: EMC_ZCAL_WAIT_CNT
+          - description: EMC_AUTO_CAL_INTERVAL
+          - description: EMC_CFG_CLKTRIM_0
+          - description: EMC_CFG_CLKTRIM_1
+          - description: EMC_CFG_CLKTRIM_2
+
+    required:
+      - clock-frequency
+      - compatible
+      - reg
+      - nvidia,emc-registers
+
+    additionalProperties: false
+
+patternProperties:
+  "^emc-table@[0-9]+$":
+    $ref: "#/$defs/emc-table"
+
+  "^emc-tables@[a-z0-9-]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          An opaque enumerator to tell different tables apart.
+
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value of RAM_CODE this timing set is used for.
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      lpddr2:
+        $ref: ddr/jedec,lpddr2.yaml#
+        type: object
+
+    patternProperties:
+      "^emc-table@[0-9]+$":
+        $ref: "#/$defs/emc-table"
+
+    oneOf:
+      - required:
+          - nvidia,ram-code
+
+      - required:
+          - lpddr2
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra20-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clock_controller 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nvidia,use-ram-code;
+
+        emc-tables@0 {
+            nvidia,ram-code = <0>;
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            emc-table@333000 {
+                reg = <333000>;
+                compatible = "nvidia,tegra20-emc-table";
+                clock-frequency = <333000>;
+                nvidia,emc-registers = <0x00000018 0x00000033
+                        0x00000012 0x00000004 0x00000004 0x00000005
+                        0x00000003 0x0000000c 0x00000006 0x00000006
+                        0x00000003 0x00000001 0x00000004 0x00000005
+                        0x00000004 0x00000009 0x0000000d 0x00000bff
+                        0x00000000 0x00000003 0x00000003 0x00000006
+                        0x00000006 0x00000001 0x00000011 0x000000c8
+                        0x00000003 0x0000000e 0x00000007 0x00000008
+                        0x00000002 0x00000000 0x00000000 0x00000002
+                        0x00000000 0x00000000 0x00000083 0xf0440303
+                        0x007fe010 0x00001414 0x00000000 0x00000000
+                        0x00000000 0x00000000 0x00000000 0x00000000>;
+            };
+        };
+
+        emc-tables@1 {
+            reg = <1>;
+
+            lpddr2 {
+                compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+                revision-id1 = <1>;
+                density = <2048>;
+                io-width = <16>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
new file mode 100644
index 0000000000..55caf69053
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-mc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SoC Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The Tegra20 Memory Controller merges request streams from various client
+  interfaces into request stream(s) for the various memory target devices,
+  and returns response data to the various clients. The Memory Controller
+  has a configurable arbitration algorithm to allow the user to fine-tune
+  performance among the various clients.
+
+  Tegra20 Memory Controller includes the GART (Graphics Address Relocation
+  Table) which allows Memory Controller to provide a linear view of a
+  fragmented memory pages.
+
+properties:
+  compatible:
+    const: nvidia,tegra20-mc-gart
+
+  reg:
+    items:
+      - description: controller registers
+      - description: GART registers
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mc
+
+  interrupts:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  "#iommu-cells":
+    const: 0
+
+  "#interconnect-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#reset-cells"
+  - "#iommu-cells"
+  - "#interconnect-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@7000f000 {
+        compatible = "nvidia,tegra20-mc-gart";
+        reg = <0x7000f000 0x400>,	/* Controller registers */
+              <0x58000000 0x02000000>;	/* GART aperture */
+        clocks = <&clock_controller 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <0>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
new file mode 100644
index 0000000000..bc8477e7ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra210-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 SoC External Memory Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from the memory controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    items:
+      - description: external memory clock
+
+  clock-names:
+    items:
+      - const: emc
+
+  interrupts:
+    items:
+      - description: EMC general interrupt
+
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a reserved memory region describing the table of EMC
+      frequencies trained by the firmware
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the memory controller node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        emc_table: emc-table@83400000 {
+            compatible = "nvidia,tegra210-emc-table";
+            reg = <0x83400000 0x10000>;
+        };
+    };
+
+    external-memory-controller@7001b000 {
+        compatible = "nvidia,tegra210-emc";
+        reg = <0x7001b000 0x1000>,
+              <0x7001e000 0x1000>,
+              <0x7001f000 0x1000>;
+        clocks = <&tegra_car TEGRA210_CLK_EMC>;
+        clock-names = "emc";
+        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+        memory-region = <&emc_table>;
+        nvidia,memory-controller = <&mc>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
new file mode 100644
index 0000000000..fb6af14cb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
@@ -0,0 +1,355 @@
+# SPDX-License-Identifier: (GPL-2.0)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra30-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 SoC External Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from Memory Controller. The EMC also has various performance-affecting
+  settings beyond the obvious SDRAM configuration parameters and initialization
+  settings. Tegra30 EMC supports multiple JEDEC standard protocols: LPDDR2,
+  LPDDR3, and DDR3.
+
+properties:
+  compatible:
+    const: nvidia,tegra30-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interconnect-cells":
+    const: 0
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the Memory Controller node.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle of the SoC "core" power domain.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value of RAM_CODE this timing set is used for.
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              Memory clock rate in Hz.
+            minimum: 1000000
+            maximum: 900000000
+
+          nvidia,emc-auto-cal-interval:
+            description:
+              Pad calibration interval in microseconds.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 2097151
+
+          nvidia,emc-mode-1:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Mode Register 1.
+
+          nvidia,emc-mode-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Mode Register 2.
+
+          nvidia,emc-mode-reset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Mode Register 0.
+
+          nvidia,emc-zcal-cnt-long:
+            description:
+              Number of EMC clocks to wait before issuing any commands after
+              sending ZCAL_MRW_CMD.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 1023
+
+          nvidia,emc-cfg-dyn-self-ref:
+            type: boolean
+            description:
+              Dynamic self-refresh enabled.
+
+          nvidia,emc-cfg-periodic-qrst:
+            type: boolean
+            description:
+              FBIO "read" FIFO periodic resetting enabled.
+
+          nvidia,emc-configuration:
+            description:
+              EMC timing characterization data. These are the registers
+              (see section "18.13.2 EMC Registers" in the TRM) whose values
+              need to be specified, according to the board documentation.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: EMC_RC
+              - description: EMC_RFC
+              - description: EMC_RAS
+              - description: EMC_RP
+              - description: EMC_R2W
+              - description: EMC_W2R
+              - description: EMC_R2P
+              - description: EMC_W2P
+              - description: EMC_RD_RCD
+              - description: EMC_WR_RCD
+              - description: EMC_RRD
+              - description: EMC_REXT
+              - description: EMC_WEXT
+              - description: EMC_WDV
+              - description: EMC_QUSE
+              - description: EMC_QRST
+              - description: EMC_QSAFE
+              - description: EMC_RDV
+              - description: EMC_REFRESH
+              - description: EMC_BURST_REFRESH_NUM
+              - description: EMC_PRE_REFRESH_REQ_CNT
+              - description: EMC_PDEX2WR
+              - description: EMC_PDEX2RD
+              - description: EMC_PCHG2PDEN
+              - description: EMC_ACT2PDEN
+              - description: EMC_AR2PDEN
+              - description: EMC_RW2PDEN
+              - description: EMC_TXSR
+              - description: EMC_TXSRDLL
+              - description: EMC_TCKE
+              - description: EMC_TFAW
+              - description: EMC_TRPAB
+              - description: EMC_TCLKSTABLE
+              - description: EMC_TCLKSTOP
+              - description: EMC_TREFBW
+              - description: EMC_QUSE_EXTRA
+              - description: EMC_FBIO_CFG6
+              - description: EMC_ODT_WRITE
+              - description: EMC_ODT_READ
+              - description: EMC_FBIO_CFG5
+              - description: EMC_CFG_DIG_DLL
+              - description: EMC_CFG_DIG_DLL_PERIOD
+              - description: EMC_DLL_XFORM_DQS0
+              - description: EMC_DLL_XFORM_DQS1
+              - description: EMC_DLL_XFORM_DQS2
+              - description: EMC_DLL_XFORM_DQS3
+              - description: EMC_DLL_XFORM_DQS4
+              - description: EMC_DLL_XFORM_DQS5
+              - description: EMC_DLL_XFORM_DQS6
+              - description: EMC_DLL_XFORM_DQS7
+              - description: EMC_DLL_XFORM_QUSE0
+              - description: EMC_DLL_XFORM_QUSE1
+              - description: EMC_DLL_XFORM_QUSE2
+              - description: EMC_DLL_XFORM_QUSE3
+              - description: EMC_DLL_XFORM_QUSE4
+              - description: EMC_DLL_XFORM_QUSE5
+              - description: EMC_DLL_XFORM_QUSE6
+              - description: EMC_DLL_XFORM_QUSE7
+              - description: EMC_DLI_TRIM_TXDQS0
+              - description: EMC_DLI_TRIM_TXDQS1
+              - description: EMC_DLI_TRIM_TXDQS2
+              - description: EMC_DLI_TRIM_TXDQS3
+              - description: EMC_DLI_TRIM_TXDQS4
+              - description: EMC_DLI_TRIM_TXDQS5
+              - description: EMC_DLI_TRIM_TXDQS6
+              - description: EMC_DLI_TRIM_TXDQS7
+              - description: EMC_DLL_XFORM_DQ0
+              - description: EMC_DLL_XFORM_DQ1
+              - description: EMC_DLL_XFORM_DQ2
+              - description: EMC_DLL_XFORM_DQ3
+              - description: EMC_XM2CMDPADCTRL
+              - description: EMC_XM2DQSPADCTRL2
+              - description: EMC_XM2DQPADCTRL2
+              - description: EMC_XM2CLKPADCTRL
+              - description: EMC_XM2COMPPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL2
+              - description: EMC_XM2QUSEPADCTRL
+              - description: EMC_XM2DQSPADCTRL3
+              - description: EMC_CTT_TERM_CTRL
+              - description: EMC_ZCAL_INTERVAL
+              - description: EMC_ZCAL_WAIT_CNT
+              - description: EMC_MRS_WAIT_CNT
+              - description: EMC_AUTO_CAL_CONFIG
+              - description: EMC_CTT
+              - description: EMC_CTT_DURATION
+              - description: EMC_DYN_SELF_REF_CONTROL
+              - description: EMC_FBIO_SPARE
+              - description: EMC_CFG_RSV
+
+        required:
+          - clock-frequency
+          - nvidia,emc-auto-cal-interval
+          - nvidia,emc-mode-1
+          - nvidia,emc-mode-2
+          - nvidia,emc-mode-reset
+          - nvidia,emc-zcal-cnt-long
+          - nvidia,emc-configuration
+
+        additionalProperties: false
+
+    required:
+      - nvidia,ram-code
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - nvidia,memory-controller
+  - "#interconnect-cells"
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    external-memory-controller@7000f400 {
+        compatible = "nvidia,tegra30-emc";
+        reg = <0x7000f400 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&tegra_car 57>;
+
+        nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+        power-domains = <&domain>;
+
+        #interconnect-cells = <0>;
+
+        emc-timings-1 {
+            nvidia,ram-code = <1>;
+
+            timing-667000000 {
+                clock-frequency = <667000000>;
+
+                nvidia,emc-auto-cal-interval = <0x001fffff>;
+                nvidia,emc-mode-1 = <0x80100002>;
+                nvidia,emc-mode-2 = <0x80200018>;
+                nvidia,emc-mode-reset = <0x80000b71>;
+                nvidia,emc-zcal-cnt-long = <0x00000040>;
+                nvidia,emc-cfg-periodic-qrst;
+
+                nvidia,emc-configuration = <
+                    0x00000020 /* EMC_RC */
+                    0x0000006a /* EMC_RFC */
+                    0x00000017 /* EMC_RAS */
+                    0x00000007 /* EMC_RP */
+                    0x00000005 /* EMC_R2W */
+                    0x0000000c /* EMC_W2R */
+                    0x00000003 /* EMC_R2P */
+                    0x00000011 /* EMC_W2P */
+                    0x00000007 /* EMC_RD_RCD */
+                    0x00000007 /* EMC_WR_RCD */
+                    0x00000002 /* EMC_RRD */
+                    0x00000001 /* EMC_REXT */
+                    0x00000000 /* EMC_WEXT */
+                    0x00000007 /* EMC_WDV */
+                    0x0000000a /* EMC_QUSE */
+                    0x00000009 /* EMC_QRST */
+                    0x0000000b /* EMC_QSAFE */
+                    0x00000011 /* EMC_RDV */
+                    0x00001412 /* EMC_REFRESH */
+                    0x00000000 /* EMC_BURST_REFRESH_NUM */
+                    0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+                    0x00000002 /* EMC_PDEX2WR */
+                    0x0000000e /* EMC_PDEX2RD */
+                    0x00000001 /* EMC_PCHG2PDEN */
+                    0x00000000 /* EMC_ACT2PDEN */
+                    0x0000000c /* EMC_AR2PDEN */
+                    0x00000016 /* EMC_RW2PDEN */
+                    0x00000072 /* EMC_TXSR */
+                    0x00000200 /* EMC_TXSRDLL */
+                    0x00000005 /* EMC_TCKE */
+                    0x00000015 /* EMC_TFAW */
+                    0x00000000 /* EMC_TRPAB */
+                    0x00000006 /* EMC_TCLKSTABLE */
+                    0x00000007 /* EMC_TCLKSTOP */
+                    0x00001453 /* EMC_TREFBW */
+                    0x0000000b /* EMC_QUSE_EXTRA */
+                    0x00000006 /* EMC_FBIO_CFG6 */
+                    0x00000000 /* EMC_ODT_WRITE */
+                    0x00000000 /* EMC_ODT_READ */
+                    0x00005088 /* EMC_FBIO_CFG5 */
+                    0xf00b0191 /* EMC_CFG_DIG_DLL */
+                    0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+                    0x00000008 /* EMC_DLL_XFORM_DQS0 */
+                    0x00000008 /* EMC_DLL_XFORM_DQS1 */
+                    0x00000008 /* EMC_DLL_XFORM_DQS2 */
+                    0x00000008 /* EMC_DLL_XFORM_DQS3 */
+                    0x0000000a /* EMC_DLL_XFORM_DQS4 */
+                    0x0000000a /* EMC_DLL_XFORM_DQS5 */
+                    0x0000000a /* EMC_DLL_XFORM_DQS6 */
+                    0x0000000a /* EMC_DLL_XFORM_DQS7 */
+                    0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+                    0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+                    0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+                    0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+                    0x0000000a /* EMC_DLL_XFORM_DQ0 */
+                    0x0000000a /* EMC_DLL_XFORM_DQ1 */
+                    0x0000000a /* EMC_DLL_XFORM_DQ2 */
+                    0x0000000a /* EMC_DLL_XFORM_DQ3 */
+                    0x000002a0 /* EMC_XM2CMDPADCTRL */
+                    0x0800013d /* EMC_XM2DQSPADCTRL2 */
+                    0x22220000 /* EMC_XM2DQPADCTRL2 */
+                    0x77fff884 /* EMC_XM2CLKPADCTRL */
+                    0x01f1f501 /* EMC_XM2COMPPADCTRL */
+                    0x07077404 /* EMC_XM2VTTGENPADCTRL */
+                    0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+                    0x080001e8 /* EMC_XM2QUSEPADCTRL */
+                    0x0c000021 /* EMC_XM2DQSPADCTRL3 */
+                    0x00000802 /* EMC_CTT_TERM_CTRL */
+                    0x00020000 /* EMC_ZCAL_INTERVAL */
+                    0x00000100 /* EMC_ZCAL_WAIT_CNT */
+                    0x0155000c /* EMC_MRS_WAIT_CNT */
+                    0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+                    0x00000000 /* EMC_CTT */
+                    0x00000000 /* EMC_CTT_DURATION */
+                    0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+                    0xe8000000 /* EMC_FBIO_SPARE */
+                    0xff00ff49 /* EMC_CFG_RSV */
+                >;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
new file mode 100644
index 0000000000..5436e6d420
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra30-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 SoC Memory Controller
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  Tegra30 Memory Controller architecturally consists of the following parts:
+
+    Arbitration Domains, which can handle a single request or response per
+    clock from a group of clients. Typically, a system has a single Arbitration
+    Domain, but an implementation may divide the client space into multiple
+    Arbitration Domains to increase the effective system bandwidth.
+
+    Protocol Arbiter, which manage a related pool of memory devices. A system
+    may have a single Protocol Arbiter or multiple Protocol Arbiters.
+
+    Memory Crossbar, which routes request and responses between Arbitration
+    Domains and Protocol Arbiters. In the simplest version of the system, the
+    Memory Crossbar is just a pass through between a single Arbitration Domain
+    and a single Protocol Arbiter.
+
+    Global Resources, which include things like configuration registers which
+    are shared across the Memory Subsystem.
+
+  The Tegra30 Memory Controller handles memory requests from internal clients
+  and arbitrates among them to allocate memory bandwidth for DDR3L and LPDDR2
+  SDRAMs.
+
+properties:
+  compatible:
+    const: nvidia,tegra30-mc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mc
+
+  interrupts:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  "#iommu-cells":
+    const: 1
+
+  "#interconnect-cells":
+    const: 1
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Value of RAM_CODE this timing set is used for.
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              Memory clock rate in Hz.
+            minimum: 1000000
+            maximum: 900000000
+
+          nvidia,emem-configuration:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description: |
+              Values to be written to the EMEM register block. See section
+              "18.13.1 MC Registers" in the TRM.
+            items:
+              - description: MC_EMEM_ARB_CFG
+              - description: MC_EMEM_ARB_OUTSTANDING_REQ
+              - description: MC_EMEM_ARB_TIMING_RCD
+              - description: MC_EMEM_ARB_TIMING_RP
+              - description: MC_EMEM_ARB_TIMING_RC
+              - description: MC_EMEM_ARB_TIMING_RAS
+              - description: MC_EMEM_ARB_TIMING_FAW
+              - description: MC_EMEM_ARB_TIMING_RRD
+              - description: MC_EMEM_ARB_TIMING_RAP2PRE
+              - description: MC_EMEM_ARB_TIMING_WAP2PRE
+              - description: MC_EMEM_ARB_TIMING_R2R
+              - description: MC_EMEM_ARB_TIMING_W2W
+              - description: MC_EMEM_ARB_TIMING_R2W
+              - description: MC_EMEM_ARB_TIMING_W2R
+              - description: MC_EMEM_ARB_DA_TURNS
+              - description: MC_EMEM_ARB_DA_COVERS
+              - description: MC_EMEM_ARB_MISC0
+              - description: MC_EMEM_ARB_RING1_THROTTLE
+
+        required:
+          - clock-frequency
+          - nvidia,emem-configuration
+
+        additionalProperties: false
+
+    required:
+      - nvidia,ram-code
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#reset-cells"
+  - "#iommu-cells"
+  - "#interconnect-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@7000f000 {
+        compatible = "nvidia,tegra30-mc";
+        reg = <0x7000f000 0x400>;
+        clocks = <&tegra_car 32>;
+        clock-names = "mc";
+
+        interrupts = <0 77 4>;
+
+        #iommu-cells = <1>;
+        #reset-cells = <1>;
+        #interconnect-cells = <1>;
+
+        emc-timings-1 {
+            nvidia,ram-code = <1>;
+
+            timing-667000000 {
+                clock-frequency = <667000000>;
+
+                nvidia,emem-configuration = <
+                    0x0000000a /* MC_EMEM_ARB_CFG */
+                    0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+                    0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+                    0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+                    0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+                    0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+                    0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+                    0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+                    0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+                    0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+                    0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+                    0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+                    0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+                    0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+                    0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+                    0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+                    0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+                    0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+                >;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
new file mode 100644
index 0000000000..0c511ab906
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/qca,ath79-ddr-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The DDR controller of the AR7xxx and AR9xxx families provides an interface to
+  flush the FIFO between various devices and the DDR. This is mainly used by
+  the IRQ controller to flush the FIFO before running the interrupt handler of
+  such devices.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-ddr-controller
+          - const: qca,ar7240-ddr-controller
+      - items:
+          - enum:
+              - qca,ar7100-ddr-controller
+              - qca,ar7240-ddr-controller
+
+  "#qca,ddr-wb-channel-cells":
+    description: |
+      Specifies the number of cells needed to encode the write buffer channel
+      index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#qca,ddr-wb-channel-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ddr_ctrl: memory-controller@18000000 {
+        compatible = "qca,ar9132-ddr-controller",
+                     "qca,ar7240-ddr-controller";
+        reg = <0x18000000 0x100>;
+
+        #qca,ddr-wb-channel-cells = <1>;
+    };
+
+    interrupt-controller {
+        // ...
+        qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+        qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+                              <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
new file mode 100644
index 0000000000..8e3822314b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas DDR Bus Controllers
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  Renesas SoCs contain one or more memory controllers.  These memory
+  controllers differ from one SoC variant to another, and are called by
+  different names, e.g. "DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+  (DBSC3)", or "SDRAM Bus State Controller (SBSC)").
+
+properties:
+  compatible:
+    enum:
+      - renesas,dbsc-r8a73a4  # R-Mobile APE6
+      - renesas,dbsc3-r8a7740 # R-Mobile A1
+      - renesas,sbsc-sh73a0   # SH-Mobile AG5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: sec  # secure interrupt
+      - const: temp # normal (temperature) interrupt
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sbsc1: memory-controller@fe400000 {
+            compatible = "renesas,sbsc-sh73a0";
+            reg = <0xfe400000 0x400>;
+            interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "sec", "temp";
+            power-domains = <&pd_a4bc0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
new file mode 100644
index 0000000000..56e62cd0b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+  be accessed via the external address space read mode or the manual mode.
+
+  The flash chip itself should be represented by a subnode of the RPC-IF node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  - if it contains "jedec,spi-nor", then SPI is used;
+  - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-rpc-if       # RZ/G2M
+              - renesas,r8a774b1-rpc-if       # RZ/G2N
+              - renesas,r8a774c0-rpc-if       # RZ/G2E
+              - renesas,r8a774e1-rpc-if       # RZ/G2H
+              - renesas,r8a7795-rpc-if        # R-Car H3
+              - renesas,r8a7796-rpc-if        # R-Car M3-W
+              - renesas,r8a77961-rpc-if       # R-Car M3-W+
+              - renesas,r8a77965-rpc-if       # R-Car M3-N
+              - renesas,r8a77970-rpc-if       # R-Car V3M
+              - renesas,r8a77980-rpc-if       # R-Car V3H
+              - renesas,r8a77990-rpc-if       # R-Car E3
+              - renesas,r8a77995-rpc-if       # R-Car D3
+              - renesas,r8a779a0-rpc-if       # R-Car V3U
+          - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2{E,H,M,N} device
+
+      - items:
+          - enum:
+              - renesas,r8a779g0-rpc-if       # R-Car V4H
+          - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-rpc-if      # RZ/G2UL
+              - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
+              - renesas,r9a07g054-rpc-if      # RZ/V2L
+          - const: renesas,rzg2l-rpc-if
+
+  reg:
+    items:
+      - description: RPC-IF registers
+      - description: direct mapping read mode area
+      - description: write buffer area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+      - const: wbuf
+
+  clocks: true
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        contains:
+          enum:
+            - cfi-flash
+            - jedec,spi-nor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-rpc-if
+then:
+  properties:
+    clocks:
+      items:
+        - description: SPI Multi IO Register access clock (SPI_CLK2)
+        - description: SPI Multi IO Main clock (SPI_CLK).
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77995-sysc.h>
+
+    spi@ee200000 {
+      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+      reg = <0xee200000 0x200>,
+            <0x08000000 0x4000000>,
+            <0xee208000 0x100>;
+      reg-names = "regs", "dirmap", "wbuf";
+      clocks = <&cpg CPG_MOD 917>;
+      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+      resets = <&cpg 917>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-max-frequency = <40000000>;
+        spi-tx-bus-width = <1>;
+        spi-rx-bus-width = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
new file mode 100644
index 0000000000..4e4af3cfc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# %YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dmc
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Node to get DDR loading. Refer to
+      Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dmc_clk
+
+  operating-points-v2: true
+
+  center-supply:
+    description:
+      DMC regulator supply.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+  interrupts:
+    maxItems: 1
+    description:
+      The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
+      finishes, a DCF interrupt is triggered.
+
+  rockchip,ddr3_speed_bin:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
+      DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
+      datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
+      being used.
+
+  rockchip,pd_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the PD_IDLE value. Defines the power-down idle period in which
+      memories are placed into power-down mode if bus is idle for PD_IDLE DFI
+      clock cycles.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the SR_IDLE value. Defines the self-refresh idle period in
+      which memories are placed into self-refresh mode if bus is idle for
+      SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
+      See also rockchip,sr-idle-ns.
+    default: 0
+
+  rockchip,sr_mc_gate_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the memory self-refresh and controller clock gating idle period.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
+      cycles.
+      See also rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd_lite_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
+      only.
+      See also rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle * DFI clock cycles.
+      See also rockchip,standby-idle-ns.
+
+  rockchip,dram_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
+      than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
+      Note: if DLL was bypassed, the odt will also stop working.
+
+  rockchip,phy_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
+      is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+      Note: PHY DLL and PHY ODT are independent.
+
+  rockchip,auto_pd_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the auto PD disable frequency in MHz.
+
+  rockchip,ddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is DDR3, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,ddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 40
+
+  rockchip,ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 120
+
+  rockchip,phy_ddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the phy side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side ODT
+      strength.
+    default: 240
+
+  rockchip,lpddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR3, this parameter defines then ODT disable
+      frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
+      ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 34
+
+  rockchip,lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 240
+
+  rockchip,phy_lpddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When dram type is LPDDR3, this parameter define the phy side odt
+      strength, default value is 240.
+
+  rockchip,lpddr4_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr4_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 60
+
+  rockchip,lpddr4_dq_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      DQS/DQ line strength in ohms.
+    default: 40
+
+  rockchip,lpddr4_ca_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      CA line strength in ohms.
+    default: 40
+
+  rockchip,phy_lpddr4_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
+      (including command address line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr4_ck_cs_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side clock
+      line and CS line drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
+      strength.
+    default: 60
+
+  rockchip,pd-idle-ns:
+    description:
+      Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
+      period in which memories are placed into power-down mode if bus is idle
+      for PD_IDLE nanoseconds.
+
+  rockchip,sr-idle-ns:
+    description:
+      Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
+      period in which memories are placed into self-refresh mode if bus is idle
+      for SR_IDLE nanoseconds.
+    default: 0
+
+  rockchip,sr-mc-gate-idle-ns:
+    description:
+      Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
+
+  rockchip,srpd-lite-idle-ns:
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle nanoseconds. This parameter is for LPDDR4 only.
+
+  rockchip,standby-idle-ns:
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle nanoseconds.
+
+  rockchip,pd-idle-dis-freq-hz:
+    description:
+      Defines the power-down idle disable frequency in Hz. When the DDR
+      frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh idle disable frequency in Hz. When the DDR
+      frequency is greater than sr-idle-dis-freq, self-refresh idle is
+      disabled. See also rockchip,sr-idle-ns.
+
+  rockchip,sr-mc-gate-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh and memory-controller clock gating disable
+      frequency in Hz. When the DDR frequency is greater than
+      sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
+      rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd-lite-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh power down idle disable frequency in Hz. When
+      the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
+      not be placed into self-refresh power down mode when idle. See also
+      rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby-idle-dis-freq-hz:
+    description:
+      Defines the standby idle disable frequency in Hz. When the DDR frequency
+      is greater than standby-idle-dis-freq, standby idle is disabled. See also
+      rockchip,standby-idle-ns.
+
+required:
+  - compatible
+  - devfreq-events
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - center-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller {
+      compatible = "rockchip,rk3399-dmc";
+      devfreq-events = <&dfi>;
+      rockchip,pmu = <&pmu>;
+      interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_DDRC>;
+      clock-names = "dmc_clk";
+      operating-points-v2 = <&dmc_opp_table>;
+      center-supply = <&ppvar_centerlogic>;
+      rockchip,pd-idle-ns = <160>;
+      rockchip,sr-idle-ns = <10240>;
+      rockchip,sr-mc-gate-idle-ns = <40960>;
+      rockchip,srpd-lite-idle-ns = <61440>;
+      rockchip,standby-idle-ns = <81920>;
+      rockchip,ddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr4_odt_dis_freq = <333000000>;
+      rockchip,pd-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+      rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+      rockchip,standby-idle-dis-freq-hz = <928000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
new file mode 100644
index 0000000000..783ac984d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos5422-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory
+  Controller device
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Lukasz Luba <lukasz.luba@arm.com>
+
+description: |
+  The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the
+  DRAM memory chips are connected. The driver is to monitor the controller in
+  runtime and switch frequency and voltage. To monitor the usage of the
+  controller in runtime, the driver uses the PPMU (Platform Performance
+  Monitoring Unit), which is able to measure the current load of the memory.
+  When 'userspace' governor is used for the driver, an application is able to
+  switch the DMC and memory frequency.
+
+properties:
+  compatible:
+    items:
+      - const: samsung,exynos5422-dmc
+
+  clock-names:
+    items:
+      - const: fout_spll
+      - const: mout_sclk_spll
+      - const: ff_dout_spll2
+      - const: fout_bpll
+      - const: mout_bpll
+      - const: sclk_bpll
+      - const: mout_mx_mspll_ccore
+      - const: mout_mclk_cdrex
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 16
+    items:
+      maxItems: 1
+    description: phandles of the PPMU events used by the controller.
+
+  device-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle of the connected DRAM memory device. For more information please
+      refer to jedec,lpddr3.yaml.
+
+  operating-points-v2: true
+
+  interrupts:
+    items:
+      - description: DMC internal performance event counters in DREX0
+      - description: DMC internal performance event counters in DREX1
+
+  interrupt-names:
+    items:
+      - const: drex_0
+      - const: drex_1
+
+  reg:
+    items:
+      - description: registers of DREX0
+      - description: registers of DREX1
+
+  samsung,syscon-clk:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle of the clock register set used by the controller, these registers
+      are used for enabling a 'pause' feature and are not exposed by clock
+      framework but they must be used in a safe way.  The register offsets are
+      in the driver code and specyfic for this SoC type.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - devfreq-events
+  - device-handle
+  - reg
+  - samsung,syscon-clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    ppmu_dmc0_0: ppmu@10d00000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x10d00000 0x2000>;
+        clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+        clock-names = "ppmu";
+        events {
+            ppmu_event_dmc0_0: ppmu-event3-dmc0-0 {
+                event-name = "ppmu-event3-dmc0_0";
+            };
+        };
+    };
+
+    memory-controller@10c20000 {
+        compatible = "samsung,exynos5422-dmc";
+        reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
+        clocks = <&clock CLK_FOUT_SPLL>,
+                 <&clock CLK_MOUT_SCLK_SPLL>,
+                 <&clock CLK_FF_DOUT_SPLL2>,
+                 <&clock CLK_FOUT_BPLL>,
+                 <&clock CLK_MOUT_BPLL>,
+                 <&clock CLK_SCLK_BPLL>,
+                 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+                 <&clock CLK_MOUT_MCLK_CDREX>;
+        clock-names = "fout_spll",
+                      "mout_sclk_spll",
+                      "ff_dout_spll2",
+                      "fout_bpll",
+                      "mout_bpll",
+                      "sclk_bpll",
+                      "mout_mx_mspll_ccore",
+                      "mout_mclk_cdrex";
+        operating-points-v2 = <&dmc_opp_table>;
+        devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+                         <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+        device-handle = <&samsung_K3QF2F20DB>;
+        vdd-supply = <&buck1_reg>;
+        samsung,syscon-clk = <&clock>;
+        interrupt-parent = <&combiner>;
+        interrupts = <16 0>, <16 1>;
+        interrupt-names = "drex_0", "drex_1";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
new file mode 100644
index 0000000000..87ff9ee098
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
+  working with the memory devices supporting up to (LP)DDR4 protocol. It can
+  be equipped with SEC/DEC ECC feature if DRAM data bus width is either
+  16-bits or 32-bits or 64-bits wide.
+
+  For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+  controller. It has an optional SEC/DEC ECC support in 64- and 32-bits
+  bus width configurations.
+
+properties:
+  compatible:
+    oneOf:
+      - deprecated: true
+        description: Synopsys DW uMCTL2 DDR controller v3.80a
+        const: snps,ddrc-3.80a
+      - description: Synopsys DW uMCTL2 DDR controller
+        const: snps,dw-umctl2-ddrc
+      - description: Xilinx ZynqMP DDR controller v2.40a
+        const: xlnx,zynqmp-ddrc-2.40a
+
+  interrupts:
+    description:
+      DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+      ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+      Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+      signals merged before they reach the IRQ controller or have some of them
+      absent in case if the corresponding feature is unavailable/disabled.
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    oneOf:
+      - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+        items:
+          - const: ecc
+      - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+        items:
+          enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      A standard set of the clock sources contains CSRs bus clock, AXI-ports
+      reference clock, DDRC core clock, Scrubber standalone clock
+      (synchronous to the DDRC clock).
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ pclk, aclk, core, sbr ]
+
+  resets:
+    description:
+      Each clock domain can have separate reset signal.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ prst, arst, core, sbr ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@fd070000 {
+      compatible = "xlnx,zynqmp-ddrc-2.40a";
+      reg = <0xfd070000 0x30000>;
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    memory-controller@3d400000 {
+      compatible = "snps,dw-umctl2-ddrc";
+      reg = <0x3d400000 0x400000>;
+
+      interrupts = <147 IRQ_TYPE_LEVEL_HIGH>, <148 IRQ_TYPE_LEVEL_HIGH>,
+                   <149 IRQ_TYPE_LEVEL_HIGH>, <150 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+      clocks = <&pclk>, <&aclk>, <&core_clk>, <&sbr_clk>;
+      clock-names = "pclk", "aclk", "core", "sbr";
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
new file mode 100644
index 0000000000..475e409506
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for ST FMC2 Controller
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  st,fmc2-ebi-cs-transaction-type:
+    description: |
+      Select one of the transactions type supported
+      0: Asynchronous mode 1 SRAM/FRAM.
+      1: Asynchronous mode 1 PSRAM.
+      2: Asynchronous mode A SRAM/FRAM.
+      3: Asynchronous mode A PSRAM.
+      4: Asynchronous mode 2 NOR.
+      5: Asynchronous mode B NOR.
+      6: Asynchronous mode C NOR.
+      7: Asynchronous mode D NOR.
+      8: Synchronous read synchronous write PSRAM.
+      9: Synchronous read asynchronous write PSRAM.
+      10: Synchronous read synchronous write NOR.
+      11: Synchronous read asynchronous write NOR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 11
+
+  st,fmc2-ebi-cs-cclk-enable:
+    description: Continuous clock enable (first bank must be configured
+      in synchronous mode). The FMC_CLK is generated continuously
+      during asynchronous and synchronous access. By default, the
+      FMC_CLK is only generated during synchronous access.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-mux-enable:
+    description: Address/Data multiplexed on databus (valid only with
+      NOR and PSRAM transactions type). By default, Address/Data
+      are not multiplexed.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-buswidth:
+    description: Data bus width
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 16 ]
+    default: 16
+
+  st,fmc2-ebi-cs-waitpol-high:
+    description: Wait signal polarity (NWAIT signal active high).
+      By default, NWAIT is active low.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-waitcfg-enable:
+    description: The NWAIT signal indicates wheither the data from the
+      device are valid or if a wait state must be inserted when accessing
+      the device in synchronous mode. By default, the NWAIT signal is
+      active one data cycle before wait state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-wait-enable:
+    description: The NWAIT signal is enabled (its level is taken into
+      account after the programmed latency period to insert wait states
+      if asserted). By default, the NWAIT signal is disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-asyncwait-enable:
+    description: The NWAIT signal is taken into account during asynchronous
+      transactions. By default, the NWAIT signal is not taken into account
+      during asynchronous transactions.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-cpsize:
+    description: CRAM page size. The controller splits the burst access
+      when the memory page is reached. By default, no burst split when
+      crossing page boundary.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 128, 256, 512, 1024 ]
+    default: 0
+
+  st,fmc2-ebi-cs-byte-lane-setup-ns:
+    description: This property configures the byte lane setup timing
+      defined in nanoseconds from NBLx low to Chip Select NEx low.
+
+  st,fmc2-ebi-cs-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed read/write
+      transactions.
+
+  st,fmc2-ebi-cs-data-setup-ns:
+    description: This property defines the duration of the data setup phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-bus-turnaround-ns:
+    description: This property defines the delay in nanoseconds between the
+      end of current read/write transaction and the next transaction.
+
+  st,fmc2-ebi-cs-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-clk-period-ns:
+    description: This property defines the FMC_CLK output signal period in
+      nanoseconds.
+
+  st,fmc2-ebi-cs-data-latency-ns:
+    description: This property defines the data latency before reading or
+      writing the first data in nanoseconds.
+
+  st,fmc2-ebi-cs-write-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed write
+      transactions.
+
+  st,fmc2-ebi-cs-write-data-setup-ns:
+    description: This property defines the duration of the data setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-bus-turnaround-ns:
+    description: This property defines the delay between the end of current
+      write transaction and the next transaction in nanoseconds.
+
+  st,fmc2-ebi-cs-write-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-max-low-pulse-ns:
+    description: This property defines the maximum chip select low pulse
+      duration in nanoseconds for synchronous transactions. When this timing
+      reaches 0, the controller splits the current access, toggles NE to
+      allow device refresh and restarts a new access.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
new file mode 100644
index 0000000000..14f1833d37
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
+
+description: |
+  The FMC2 functional block makes the interface with: synchronous and
+  asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
+  peripherals) and NAND flash memories.
+  Its main purposes are:
+    - to translate AXI transactions into the appropriate external device
+      protocol
+    - to meet the access time requirements of the external devices
+  All external devices share the addresses, data and control signals with the
+  controller. Each external device is accessed by means of a unique Chip
+  Select. The FMC2 performs only one access at a time to an external device.
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-fmc2-ebi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Reflects the memory layout with four integer values per bank. Format:
+      <bank-number> 0 <address of the bank> <size>
+
+patternProperties:
+  "^.*@[0-4],[a-f0-9]+$":
+    additionalProperties: true
+    type: object
+    $ref: mc-peripheral-props.yaml#
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    memory-controller@58002000 {
+      #address-cells = <2>;
+      #size-cells = <1>;
+      compatible = "st,stm32mp1-fmc2-ebi";
+      reg = <0x58002000 0x1000>;
+      clocks = <&rcc FMC_K>;
+      resets = <&rcc FMC_R>;
+
+      ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+               <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+               <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+               <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+               <4 0 0x80000000 0x10000000>; /* NAND */
+
+      psram@0,0 {
+        compatible = "mtd-ram";
+        reg = <0 0x00000000 0x100000>;
+        bank-width = <2>;
+
+        st,fmc2-ebi-cs-transaction-type = <1>;
+        st,fmc2-ebi-cs-address-setup-ns = <60>;
+        st,fmc2-ebi-cs-data-setup-ns = <30>;
+        st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+      };
+
+      nand-controller@4,0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "st,stm32mp1-fmc2-nfc";
+        reg = <4 0x00000000 0x1000>,
+              <4 0x08010000 0x1000>,
+              <4 0x08020000 0x1000>,
+              <4 0x01000000 0x1000>,
+              <4 0x09010000 0x1000>,
+              <4 0x09020000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+               <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+               <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+        dma-names = "tx", "rx", "ecc";
+
+        nand@0 {
+          reg = <0>;
+          nand-on-flash-bbt;
+          #address-cells = <1>;
+          #size-cells = <1>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
new file mode 100644
index 0000000000..382ddab60f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,da8xx-ddrctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments da8xx DDR2/mDDR memory controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Documentation:
+    OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
+
+properties:
+  compatible:
+    const: ti,da850-ddr-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@b0000000 {
+        compatible = "ti,da850-ddr-controller";
+        reg = <0xb0000000 0xe8>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
new file mode 100644
index 0000000000..383d19e0ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
@@ -0,0 +1,252 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC Bus Child Nodes
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  This binding is meant for the child nodes of the GPMC node. The node
+  represents any device connected to the GPMC bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the GPMC settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+# GPMC Timing properties for child nodes. All are optional and default to 0.
+  gpmc,sync-clk-ps:
+    description: Minimum clock period for synchronous mode
+    default: 0
+
+# Chip-select signal timings corresponding to GPMC_CONFIG2:
+  gpmc,cs-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,cs-rd-off-ns:
+    description: Read deassertion time
+    default: 0
+
+  gpmc,cs-wr-off-ns:
+    description: Write deassertion time
+    default: 0
+
+# ADV signal timings corresponding to GPMC_CONFIG3:
+  gpmc,adv-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,adv-rd-off-ns:
+    description: Read deassertion time
+    default: 0
+
+  gpmc,adv-wr-off-ns:
+    description: Write deassertion time
+    default: 0
+
+  gpmc,adv-aad-mux-on-ns:
+    description: Assertion time for AAD
+    default: 0
+
+  gpmc,adv-aad-mux-rd-off-ns:
+    description: Read deassertion time for AAD
+    default: 0
+
+  gpmc,adv-aad-mux-wr-off-ns:
+    description: Write deassertion time for AAD
+    default: 0
+
+# WE signals timings corresponding to GPMC_CONFIG4:
+  gpmc,we-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,we-off-ns:
+    description: Deassertion time
+    default: 0
+
+# OE signals timings corresponding to GPMC_CONFIG4:
+  gpmc,oe-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,oe-off-ns:
+    description: Deassertion time
+    default: 0
+
+  gpmc,oe-aad-mux-on-ns:
+    description: Assertion time for AAD
+    default: 0
+
+  gpmc,oe-aad-mux-off-ns:
+    description: Deassertion time for AAD
+    default: 0
+
+# Access time and cycle time timings (in nanoseconds) corresponding to
+# GPMC_CONFIG5:
+  gpmc,page-burst-access-ns:
+    description: Multiple access word delay
+    default: 0
+
+  gpmc,access-ns:
+    description: Start-cycle to first data valid delay
+    default: 0
+
+  gpmc,rd-cycle-ns:
+    description: Total read cycle time
+    default: 0
+
+  gpmc,wr-cycle-ns:
+    description: Total write cycle time
+    default: 0
+
+  gpmc,bus-turnaround-ns:
+    description: Turn-around time between successive accesses
+    default: 0
+
+  gpmc,cycle2cycle-delay-ns:
+    description: Delay between chip-select pulses
+    default: 0
+
+  gpmc,clk-activation-ns:
+    description: GPMC clock activation time
+    default: 0
+
+  gpmc,wait-monitoring-ns:
+    description: Start of wait monitoring with regard to valid data
+    default: 0
+
+# Boolean timing parameters. If property is present, parameter is enabled
+# otherwise disabled.
+  gpmc,adv-extra-delay:
+    description: ADV signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,cs-extra-delay:
+    description: CS signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,cycle2cycle-diffcsen:
+    description: |
+      Add "cycle2cycle-delay" between successive accesses
+      to a different CS
+    type: boolean
+
+  gpmc,cycle2cycle-samecsen:
+    description: |
+      Add "cycle2cycle-delay" between successive accesses
+      to the same CS
+    type: boolean
+
+  gpmc,oe-extra-delay:
+    description: OE signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,we-extra-delay:
+    description: WE signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,time-para-granularity:
+    description: Multiply all access times by 2
+    type: boolean
+
+# The following two properties are applicable only to OMAP3+ and AM335x:
+  gpmc,wr-access-ns:
+    description: |
+      In synchronous write mode, for single or
+      burst accesses, defines the number of
+      GPMC_FCLK cycles from start access time
+      to the GPMC_CLK rising edge used by the
+      memory device for the first data capture.
+    default: 0
+
+  gpmc,wr-data-mux-bus-ns:
+    description: |
+      In address-data multiplex mode, specifies
+      the time when the first data is driven on
+      the address-data bus.
+    default: 0
+
+# GPMC chip-select settings properties for child nodes. All are optional.
+  gpmc,burst-length:
+    description: Page/burst length.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 4, 8, 16]
+    default: 0
+
+  gpmc,burst-wrap:
+    description: Enables wrap bursting
+    type: boolean
+
+  gpmc,burst-read:
+    description: Enables read page/burst mode
+    type: boolean
+
+  gpmc,burst-write:
+    description: Enables write page/burst mode
+    type: boolean
+
+  gpmc,device-width:
+    description: |
+      Total width of device(s) connected to a GPMC
+      chip-select in bytes. The GPMC supports 8-bit
+      and 16-bit devices and so this property must be
+      1 or 2.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+  gpmc,mux-add-data:
+    description: |
+      Address and data multiplexing configuration.
+      Valid values are
+      0 for Non multiplexed mode
+      1 for address-address-data multiplexing mode and
+      2 for address-data multiplexing mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  gpmc,sync-read:
+    description: |
+      Enables synchronous read. Defaults to asynchronous
+      is this is not set.
+    type: boolean
+
+  gpmc,sync-write:
+    description: |
+      Enables synchronous writes. Defaults to asynchronous
+      is this is not set.
+    type: boolean
+
+  gpmc,wait-pin:
+    description: |
+      Wait-pin used by client. Must be less than "gpmc,num-waitpins".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,wait-pin-polarity:
+    description: |
+      Set the desired polarity for the selected wait pin.
+      0 for active low, 1 for active high.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  gpmc,wait-on-read:
+    description: Enables wait monitoring on reads.
+    type: boolean
+
+  gpmc,wait-on-write:
+    description: Enables wait monitoring on writes.
+    type: boolean
+
+required:
+  - reg
+
+# the GPMC child will have its own native properties
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
new file mode 100644
index 0000000000..b049837ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC Memory Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  The GPMC is a unified memory controller dedicated for interfacing
+  with external memory devices like
+  - Asynchronous SRAM-like memories and ASICs
+  - Asynchronous, synchronous, and page mode burst NOR flash
+  - NAND flash
+  - Pseudo-SRAM devices
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am3352-gpmc
+          - ti,am64-gpmc
+          - ti,omap2420-gpmc
+          - ti,omap2430-gpmc
+          - ti,omap3430-gpmc
+          - ti,omap4430-gpmc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: data
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      Functional clock. Used for bus timing calculations and
+      GPMC configuration.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA channel for GPMC NAND prefetch
+
+  dma-names:
+    items:
+      - const: rxtx
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  gpmc,num-cs:
+    description: maximum number of supported chip-select lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  gpmc,num-waitpins:
+    description: maximum number of supported wait pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ranges:
+    minItems: 1
+    description: |
+      Must be set up to reflect the memory layout with four
+      integer values for each chip-select line in use,
+      <cs-number> 0 <physical address of mapping> <size>
+    items:
+      - description: NAND bank 0
+      - description: NOR/SRAM bank 0
+      - description: NOR/SRAM bank 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller:
+    description: |
+      The GPMC driver implements an interrupt controller for
+      the NAND events "fifoevent" and "termcount" plus the
+      rising/falling edges on the GPMC_WAIT pins.
+      The interrupt number mapping is as follows
+      0 - NAND_fifoevent
+      1 - NAND_termcount
+      2 - GPMC_WAIT0 pin edge
+      3 - GPMC_WAIT1 pin edge, and so on.
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller:
+    description: |
+      The GPMC driver implements a GPIO controller for the
+      GPMC WAIT pins that can be used as general purpose inputs.
+      0 maps to GPMC_WAIT0 pin.
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with GPMC. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  ti,no-idle-on-init:
+    description:
+      Prevent idling the module at init. This is for legacy omap2/3
+      platforms only.
+    type: boolean
+    deprecated: true
+
+patternProperties:
+  "@[0-7],[a-f0-9]+$":
+    type: object
+    description: |
+      The child device node represents the device connected to the GPMC
+      bus. The device can be a NAND chip, SRAM device, NOR device
+      or an ASIC.
+    $ref: ti,gpmc-child.yaml
+
+
+required:
+  - compatible
+  - reg
+  - gpmc,num-cs
+  - gpmc,num-waitpins
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-gpmc
+    then:
+      required:
+        - reg-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      reg = <0x50000000 0x2000>;
+      interrupts = <100>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
new file mode 100644
index 0000000000..190437a0c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt
@@ -0,0 +1,210 @@
+* Device tree bindings for Texas instruments AEMIF controller
+
+The Async External Memory Interface (EMIF16/AEMIF) controller is intended to
+provide a glue-less interface to a variety of asynchronous memory devices like
+ASRA M, NOR and NAND memory. A total of 256M bytes of any of these memories
+can be accessed at any given time via four chip selects with 64M byte access
+per chip select. Synchronous memories such as DDR1 SD RAM, SDR SDRAM
+and Mobile SDR are not supported.
+
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
+Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+
+Required properties:
+
+- compatible:		"ti,davinci-aemif"
+			"ti,keystone-aemif"
+			"ti,da850-aemif"
+
+- reg:			contains offset/length value for AEMIF control registers
+			space.
+
+- #address-cells:	Must be 2. The partition number has to be encoded in the
+			first address cell and it may accept values 0..N-1
+			(N - total number of partitions). It's recommended to
+			assign N-1 number for the control partition. The second
+			cell is the offset into the partition.
+
+- #size-cells:		Must be set to 1.
+
+- ranges:		Contains memory regions. There are two types of
+			ranges/partitions:
+			- CS-specific partition/range. If continuous, must be
+			set up to reflect the memory layout for 4 chipselects,
+			if not then additional range/partition can be added and
+			child device can select the proper one.
+			- control partition which is common for all CS
+			interfaces.
+
+- clocks:		the clock feeding the controller clock. Required only
+			if clock tree data present in device tree.
+			See clock-bindings.txt
+
+- clock-names:		clock name. It has to be "aemif". Required only if clock
+			tree data present in device tree, in another case don't
+			use it.
+			See clock-bindings.txt
+
+- clock-ranges:		Empty property indicating that child nodes can inherit
+			named clocks. Required only if clock tree data present
+			in device tree.
+			See clock-bindings.txt
+
+
+Child chip-select (cs) nodes contain the memory devices nodes connected to
+such as NOR (e.g. cfi-flash) and NAND (ti,davinci-nand, see davinci-nand.txt).
+There might be board specific devices like FPGAs.
+
+Required child cs node properties:
+
+- #address-cells:	Must be 2.
+
+- #size-cells:		Must be 1.
+
+- ranges:		Empty property indicating that child nodes can inherit
+			memory layout.
+
+- clock-ranges:		Empty property indicating that child nodes can inherit
+			named clocks. Required only if clock tree data present
+			in device tree.
+
+- ti,cs-chipselect:	number of chipselect. Indicates on the aemif driver
+			which chipselect is used for accessing the memory. For
+			compatibles "ti,davinci-aemif" and "ti,keystone-aemif"
+			it can be in range [0-3]. For compatible
+			"ti,da850-aemif" range is [2-5].
+
+Optional child cs node properties:
+
+- ti,cs-bus-width:		width of the asynchronous device's data bus
+				8 or 16 if not preset 8
+
+- ti,cs-select-strobe-mode:	enable/disable select strobe mode
+				In select strobe mode chip select behaves as
+				the strobe and is active only during the strobe
+				period. If present then enable.
+
+- ti,cs-extended-wait-mode:	enable/disable extended wait mode
+				if set, the controller monitors the EMIFWAIT pin
+				mapped to that chip select to determine if the
+				device wants to extend the strobe period. If
+				present then enable.
+
+- ti,cs-min-turnaround-ns:	minimum turn around time, ns
+				Time between the end of one asynchronous memory
+				access and the start of another asynchronous
+				memory access. This delay is not incurred
+				between a read followed by read or a write
+				followed by a write to same chip select.
+
+- ti,cs-read-setup-ns:		read setup width, ns
+				Time between the beginning of a memory cycle
+				and the activation of read strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-read-strobe-ns:		read strobe width, ns
+				Time between the activation and deactivation of
+				the read strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-read-hold-ns:		read hold width, ns
+				Time between the deactivation of the read
+				strobe and the end of the cycle (which may be
+				either an address change or the deactivation of
+				the chip select signal.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-setup-ns:		write setup width, ns
+				Time between the beginning of a memory cycle
+				and the activation of write strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-strobe-ns:	write strobe width, ns
+				Time between the activation and deactivation of
+				the write strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-hold-ns:		write hold width, ns
+				Time between the deactivation of the write
+				strobe and the end of the cycle (which may be
+				either an address change or the deactivation of
+				the chip select signal.
+				Minimum value is 1 (0 treated as 1).
+
+If any of the above parameters are absent, current parameter value will be taken
+from the corresponding HW reg.
+
+Example for aemif, davinci nand and nor flash chip select shown below.
+
+memory-controller@21000a00 {
+	compatible = "ti,davinci-aemif";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	clocks = <&clkaemif 0>;
+	clock-names = "aemif";
+	clock-ranges;
+	reg = <0x21000A00 0x00000100>;
+	ranges = <0 0 0x70000000 0x10000000
+		  1 0 0x21000A00 0x00000100>;
+		  /*
+		   * Partition0: CS-specific memory range which is
+		   * implemented as continuous physical memory region
+		   * Partition1: control memory range
+		   */
+
+	nand:cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <2>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <0>;
+		ti,cs-read-hold-ns = <7>;
+		ti,cs-read-strobe-ns = <42>;
+		ti,cs-read-setup-ns = <14>;
+		ti,cs-write-hold-ns = <7>;
+		ti,cs-write-strobe-ns = <42>;
+		ti,cs-write-setup-ns = <14>;
+
+		nand@0,0x8000000 {
+			compatible = "ti,davinci-nand";
+			reg = <0 0x8000000 0x4000000
+			       1 0x0000000 0x0000100>;
+			/*
+			 * Partition0, offset 0x8000000, size 0x4000000
+			 * Partition1, offset 0x0000000, size 0x0000100
+			 */
+
+			.. see davinci-nand.txt
+		};
+	};
+
+	nor:cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <0>;
+		ti,cs-read-hold-ns = <8>;
+		ti,cs-read-strobe-ns = <40>;
+		ti,cs-read-setup-ns = <14>;
+		ti,cs-write-hold-ns = <7>;
+		ti,cs-write-strobe-ns = <40>;
+		ti,cs-write-setup-ns = <14>;
+		ti,cs-bus-width = <16>;
+
+		flash@0,0x0000000 {
+			compatible = "cfi-flash";
+			reg = <0 0x0000000 0x4000000>;
+
+			...
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
new file mode 100644
index 0000000000..63f674ffeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@@ -0,0 +1,84 @@
+* EMIF family of TI SDRAM controllers
+
+EMIF - External Memory Interface - is an SDRAM controller used in
+TI SoCs. EMIF supports, based on the IP revision, one or more of
+DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance
+of the EMIF IP and memory parts attached to it. Certain revisions
+of the EMIF controller also contain optional ECC support, which
+corrects one bit errors and detects two bit errors.
+
+Required properties:
+- compatible	: Should be of the form "ti,emif-<ip-rev>" where <ip-rev>
+  is the IP revision of the specific EMIF instance. For newer controllers,
+  compatible should be one of the following:
+  	     "ti,emif-am3352"
+	     "ti,emif-am4372"
+	     "ti,emif-dra7xx"
+	     "ti,emif-keystone"
+
+- phy-type	: <u32> indicating the DDR phy type. Following are the
+  allowed values
+  <1>	: Attila PHY
+  <2>	: Intelli PHY
+
+- device-handle	: phandle to a "lpddr2" node representing the memory part
+
+- ti,hwmods	: For TI hwmods processing and omap device creation
+  the value shall be "emif<n>" where <n> is the number of the EMIF
+  instance with base 1.
+- interrupts	: interrupt used by the controller
+
+Required only for "ti,emif-am3352" and "ti,emif-am4372":
+- sram			: Phandles for generic sram driver nodes,
+  first should be type 'protect-exec' for the driver to use to copy
+  and run PM functions, second should be regular pool to be used for
+  data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
+  for more details.
+
+Optional properties:
+- cs1-used		: Have this property if CS1 of this EMIF
+  instance has a memory part attached to it. If there is a memory
+  part attached to CS1, it should be the same type as the one on CS0,
+  so there is no need to give the details of this memory part.
+
+- cal-resistor-per-cs	: Have this property if the board has one
+  calibration resistor per chip-select.
+
+- hw-caps-read-idle-ctrl: Have this property if the controller
+  supports read idle window programming
+
+- hw-caps-dll-calib-ctrl: Have this property if the controller
+  supports dll calibration control
+
+- hw-caps-ll-interface	: Have this property if the controller
+  has a low latency interface and corresponding interrupt events
+
+- hw-caps-temp-alert	: Have this property if the controller
+  has capability for generating SDRAM temperature alerts
+
+-Examples:
+
+emif1: emif@4c000000 {
+	compatible	= "ti,emif-4d";
+	ti,hwmods	= "emif2";
+	phy-type	= <1>;
+	device-handle	= <&elpida_ECB240ABACN>;
+	cs1-used;
+	hw-caps-read-idle-ctrl;
+	hw-caps-ll-interface;
+	hw-caps-temp-alert;
+};
+
+/* From am33xx.dtsi */
+emif: emif@4c000000 {
+        compatible = "ti,emif-am3352";
+        reg =   <0x4C000000 0x1000>;
+        sram = <&pm_sram_code
+                &pm_sram_data>;
+};
+
+emif1: emif@4c000000 {
+	compatible = "ti,emif-dra7xx";
+	reg = <0x4c000000 0x200>;
+	interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
new file mode 100644
index 0000000000..b74ad9a330
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynq-ddrc-a05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq A05 DDR Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Michal Simek <michal.simek@amd.com>
+
+description:
+  The Zynq DDR ECC controller has an optional ECC support in half-bus width
+  (16-bit) configuration. It is capable of correcting single bit ECC errors
+  and detecting double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,zynq-ddrc-a05
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f8006000 {
+      compatible = "xlnx,zynq-ddrc-a05";
+      reg = <0xf8006000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
new file mode 100644
index 0000000000..ca9fc747bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynqmp OCM(On-Chip Memory) Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  The OCM supports 64-bit wide ECC functionality to detect multi-bit errors
+  and recover from a single-bit memory fault.On a write, if all bytes are
+  being written, the ECC is generated and written into the ECC RAM along with
+  the write-data that is written into the data RAM. If one or more bytes are
+  not written, then the read operation results in an correctable error or
+  uncorrectable error.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ocmc-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller@ff960000 {
+      compatible = "xlnx,zynqmp-ocmc-1.0";
+      reg = <0xff960000 0x1000>;
+      interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt
new file mode 100644
index 0000000000..63f3ee3375
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt
@@ -0,0 +1,85 @@
+* Marvell 88PM860x Power Management IC
+
+Required parent device properties:
+- compatible : "marvell,88pm860x"
+- reg : the I2C slave address for the 88pm860x chip
+- interrupts : IRQ line for the 88pm860x chip
+- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain)
+- #interrupt-cells : should be 1.
+		- The cell is the 88pm860x local IRQ number
+
+Optional parent device properties:
+- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read
+- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. <reg> stores the I2C address
+				of one chip, and this property stores the I2C address of
+				another chip.
+
+88pm860x consists of a large and varied group of sub-devices:
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+88pm860x-onkey		:		: On key
+88pm860x-rtc		:		: RTC
+88pm8607		:		: Regulators
+88pm860x-backlight	:		: Backlight
+88pm860x-led		:		: Led
+88pm860x-touch		:		: Touchscreen
+
+Example:
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+		interrupts = <4>;
+		interrupt-parent = <&intc>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		marvell,88pm860x-irq-read-clr;
+		marvell,88pm860x-slave-addr = <0x11>;
+
+		regulators {
+			BUCK1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+		rtc {
+			marvell,88pm860x-vrtc = <1>;
+		};
+		touch {
+			marvell,88pm860x-gpadc-prebias = <1>;
+			marvell,88pm860x-gpadc-slot-cycle = <1>;
+			marvell,88pm860x-tsi-prebias = <6>;
+			marvell,88pm860x-pen-prebias = <16>;
+			marvell,88pm860x-pen-prechg = <2>;
+			marvell,88pm860x-resistor-X = <300>;
+		};
+		backlights {
+			backlight-0 {
+				marvell,88pm860x-iset = <4>;
+				marvell,88pm860x-pwm = <3>;
+			};
+			backlight-2 {
+			};
+		};
+		leds {
+			led0-red {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-green {
+				marvell,88pm860x-iset = <12>;
+			};
+			led0-blue {
+				marvell,88pm860x-iset = <12>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
new file mode 100644
index 0000000000..5ca75d888b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/act8945a.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for Active-semi ACT8945A MFD driver
+
+Required properties:
+ - compatible: "active-semi,act8945a".
+ - reg: the I2C slave address for the ACT8945A chip
+
+The chip exposes two subdevices:
+ - a regulators: see ../regulator/act8945a-regulator.txt
+ - a charger: see ../power/act8945a-charger.txt
+
+Example:
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+
+		active-semi,vsel-high;
+
+		regulators {
+			vdd_1v35_reg: REG_DCDC1 {
+				regulator-name = "VDD_1V35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vdd_1v2_reg: REG_DCDC2 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: REG_DCDC3 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_fuse_reg: REG_LDO1 {
+				regulator-name = "VDD_FUSE";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_lp_reg: REG_LDO2 {
+				regulator-name = "VDD_3V3_LP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_led_reg: REG_LDO3 {
+				regulator-name = "VDD_LED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sdhc_1v8_reg: REG_LDO4 {
+				regulator-name = "VDD_SDHC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+			interrupt-parent = <&pioA>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+			active-semi,input-voltage-threshold-microvolt = <6600>;
+			active-semi,precondition-timeout = <40>;
+			active-semi,total-timeout = <3>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
new file mode 100644
index 0000000000..6811246c57
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi ATC260x Power Management IC
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
+  and GPIO controller blocks. Currently only the PM related functionalities
+  (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
+  chip variants are supported.
+  ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
+  regulators and 1 fixed LDO regulator.
+  ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
+  regulators.
+
+allOf:
+  - $ref: ../input/input.yaml
+
+properties:
+  compatible:
+    enum:
+      - actions,atc2603c
+      - actions,atc2609a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-time-sec:
+    description: |
+      Duration in seconds which the key should be kept pressed for device
+      to reset automatically. The hardware default is 8. Use 0 to disable
+      this functionality.
+    enum: [0, 6, 8, 10, 12]
+
+  regulators:
+    type: object
+    description: |
+      List of child nodes specifying the regulators, depending on chip variant:
+      * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
+      * ATC2609A: dcdc[0-4], ldo[0-9]
+
+    properties:
+      compatible:
+        enum:
+          - actions,atc2603c-regulator
+          - actions,atc2609a-regulator
+
+      switchldo1:
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+          regulator-active-discharge: true
+
+        additionalProperties: false
+
+    patternProperties:
+      "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
+        description: ATC260x voltage regulators supplies
+
+      "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+
+        additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: actions,atc2603c-regulator
+        then:
+          patternProperties:
+            "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
+
+            "^(ldo|dcdc)":
+              properties:
+                regulator-allow-bypass: false
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: actions,atc2609a-regulator
+        then:
+          patternProperties:
+            "^(ldo1[1-2]|switchldo1)(-supply)?$": false
+
+            "^(dcdc|ldo[3-9])":
+              properties:
+                regulator-allow-bypass: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@65 {
+            compatible = "actions,atc2603c";
+            reg = <0x65>;
+            interrupt-parent = <&sirq>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+            reset-time-sec = <6>;
+
+            regulators {
+                compatible = "actions,atc2603c-regulator";
+
+                dcdc1-supply = <&reg_5v0>;
+                dcdc3-supply = <&reg_5v0>;
+                ldo5-supply = <&reg_5v0>;
+                switchldo1-supply = <&vcc>;
+
+                vdd_cpu: dcdc1 {
+                    regulator-name = "VDD_CPU";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-always-on;
+                };
+
+                vcc: dcdc3 {
+                    regulator-name = "VCC";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vcc_3v1: ldo5 {
+                    regulator-name = "VCC_3V1";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                sd_vcc: switchldo1 {
+                    regulator-name = "SD_VCC";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
new file mode 100644
index 0000000000..c7895b2c38
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77540/MAX77541 PMIC from ADI
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  MAX77540 is a Power Management IC with 2 buck regulators.
+
+  MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
+
+properties:
+  compatible:
+    enum:
+      - adi,max77540
+      - adi,max77541
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/adi,max77541-regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "adi,max77541";
+            reg = <0x69>;
+            interrupt-parent = <&gpio>;
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+            regulators {
+                buck1 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck2 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
new file mode 100644
index 0000000000..93f5065a62
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Resistive Touchscreen Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#thermal-sensor-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ts
+      - allwinner,sun5i-a13-ts
+      - allwinner,sun6i-a31-ts
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  allwinner,ts-attached:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: A touchscreen is attached to the controller
+
+  allwinner,tp-sensitive-adjust:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 15
+
+    description: Sensitivity of pen down detection
+
+  allwinner,filter-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
+    description: |
+      Select median and averaging filter. Sample used for median /
+      averaging filter:
+        0: 4/2
+        1: 5/3
+        2: 8/4
+        3: 16/8
+
+required:
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    rtp: rtp@1c25000 {
+        compatible = "allwinner,sun4i-a10-ts";
+        reg = <0x01c25000 0x100>;
+        interrupts = <29>;
+        allwinner,ts-attached;
+        #thermal-sensor-cells = <0>;
+        /* sensitive/noisy touch panel */
+        allwinner,tp-sensitive-adjust = <0>;
+        allwinner,filter-type = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
new file mode 100644
index 0000000000..8789e3639f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 PRCM
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  compatible:
+    const: allwinner,sun6i-a31-prcm
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^.*_(clk|rst)$":
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - allwinner,sun4i-a10-mod0-clk
+          - allwinner,sun6i-a31-apb0-clk
+          - allwinner,sun6i-a31-apb0-gates-clk
+          - allwinner,sun6i-a31-ar100-clk
+          - allwinner,sun6i-a31-clock-reset
+          - fixed-factor-clock
+
+    required:
+      - compatible
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun4i-a10-mod0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            clocks:
+              maxItems: 2
+
+            clock-output-names:
+              maxItems: 1
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-apb0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              maxItems: 1
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-apb0-gates-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 1
+              description: >
+                This additional argument passed to that clock is the
+                offset of the bit controlling this particular gate in
+                the register.
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              minItems: 1
+              maxItems: 32
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-ar100-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            clocks:
+              maxItems: 4
+              description: >
+                The parent order must match the hardware programming
+                order.
+
+            clock-output-names:
+              maxItems: 1
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-clock-reset
+
+        then:
+          properties:
+            "#reset-cells":
+              const: 1
+
+          required:
+            - "#reset-cells"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+
+    prcm@1f01400 {
+        compatible = "allwinner,sun6i-a31-prcm";
+        reg = <0x01f01400 0x200>;
+
+        ar100: ar100_clk {
+            compatible = "allwinner,sun6i-a31-ar100-clk";
+            #clock-cells = <0>;
+            clocks = <&rtc 0>, <&osc24M>,
+                     <&ccu CLK_PLL_PERIPH>,
+                     <&ccu CLK_PLL_PERIPH>;
+            clock-output-names = "ar100";
+        };
+
+        ahb0: ahb0_clk {
+            compatible = "fixed-factor-clock";
+            #clock-cells = <0>;
+            clock-div = <1>;
+            clock-mult = <1>;
+            clocks = <&ar100>;
+            clock-output-names = "ahb0";
+        };
+
+        apb0: apb0_clk {
+            compatible = "allwinner,sun6i-a31-apb0-clk";
+            #clock-cells = <0>;
+            clocks = <&ahb0>;
+            clock-output-names = "apb0";
+        };
+
+        apb0_gates: apb0_gates_clk {
+            compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+            #clock-cells = <1>;
+            clocks = <&apb0>;
+            clock-output-names = "apb0_pio", "apb0_ir",
+                                 "apb0_timer", "apb0_p2wi",
+                                 "apb0_uart", "apb0_1wire",
+                                 "apb0_i2c";
+        };
+
+        ir_clk: ir_clk {
+            #clock-cells = <0>;
+            compatible = "allwinner,sun4i-a10-mod0-clk";
+            clocks = <&rtc 0>, <&osc24M>;
+            clock-output-names = "ir";
+        };
+
+        apb0_rst: apb0_rst {
+            compatible = "allwinner,sun6i-a31-clock-reset";
+            #reset-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
new file mode 100644
index 0000000000..e51f855199
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 PRCM
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a23-prcm
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^.*(clk|rst|codec).*$":
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - fixed-factor-clock
+          - allwinner,sun8i-a23-apb0-clk
+          - allwinner,sun8i-a23-apb0-gates-clk
+          - allwinner,sun6i-a31-clock-reset
+          - allwinner,sun8i-a23-codec-analog
+
+    required:
+      - compatible
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun8i-a23-apb0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              maxItems: 1
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun8i-a23-apb0-gates-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 1
+              description: >
+                This additional argument passed to that clock is the
+                offset of the bit controlling this particular gate in
+                the register.
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              minItems: 1
+              maxItems: 32
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-clock-reset
+
+        then:
+          properties:
+            "#reset-cells":
+              const: 1
+
+          required:
+            - "#reset-cells"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    prcm@1f01400 {
+        compatible = "allwinner,sun8i-a23-prcm";
+        reg = <0x01f01400 0x200>;
+
+        ar100: ar100_clk {
+            compatible = "fixed-factor-clock";
+            #clock-cells = <0>;
+            clock-div = <1>;
+            clock-mult = <1>;
+            clocks = <&osc24M>;
+            clock-output-names = "ar100";
+        };
+
+        ahb0: ahb0_clk {
+            compatible = "fixed-factor-clock";
+            #clock-cells = <0>;
+            clock-div = <1>;
+            clock-mult = <1>;
+            clocks = <&ar100>;
+            clock-output-names = "ahb0";
+        };
+
+        apb0: apb0_clk {
+            compatible = "allwinner,sun8i-a23-apb0-clk";
+            #clock-cells = <0>;
+            clocks = <&ahb0>;
+            clock-output-names = "apb0";
+        };
+
+        apb0_gates: apb0_gates_clk {
+            compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+            #clock-cells = <1>;
+            clocks = <&apb0>;
+            clock-output-names = "apb0_pio", "apb0_timer",
+                                 "apb0_rsb", "apb0_uart",
+                                 "apb0_i2c";
+        };
+
+        apb0_rst: apb0_rst {
+            compatible = "allwinner,sun6i-a31-clock-reset";
+            #reset-cells = <1>;
+        };
+
+        codec_analog: codec-analog {
+            compatible = "allwinner,sun8i-a23-codec-analog";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
new file mode 100644
index 0000000000..a688520dd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -0,0 +1,56 @@
+* Altera Arria10 Development Kit System Resource Chip
+
+Required parent device properties:
+- compatible		: "altr,a10sr"
+- spi-max-frequency	: Maximum SPI frequency.
+- reg			: The SPI Chip Select address for the Arria10
+			  System Resource chip
+- interrupts		: The interrupt line the device is connected to.
+- interrupt-controller	: Marks the device node as an interrupt controller.
+- #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+
+The A10SR consists of these sub-devices:
+
+Device                   Description
+------                   ----------
+a10sr_gpio               GPIO Controller
+a10sr_rst                Reset Controller
+
+Arria10 GPIO
+Required Properties:
+- compatible        : Should be "altr,a10sr-gpio"
+- gpio-controller   : Marks the device node as a GPIO Controller.
+- #gpio-cells       : Should be two.  The first cell is the pin number and
+                      the second cell is used to specify flags.
+                      See ../gpio/gpio.txt for more information.
+
+Arria10 Peripheral PHY Reset
+Required Properties:
+- compatible        : Should be "altr,a10sr-reset"
+- #reset-cells      : Should be one.
+
+Example:
+
+        resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		a10sr_rst: reset-controller {
+			compatible = "altr,a10sr-reset";
+			#reset-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
new file mode 100644
index 0000000000..c442c3cdff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ampere Altra SMPro firmware driver
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+description: |
+  Ampere Altra SMPro firmware may contain different blocks like hardware
+  monitoring, error monitoring and other miscellaneous features.
+
+properties:
+  compatible:
+    enum:
+      - ampere,smpro
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        smpro@4f {
+            compatible = "ampere,smpro";
+            reg = <0x4f>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt
new file mode 100644
index 0000000000..d98cf18c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/as3711.txt
@@ -0,0 +1,73 @@
+AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
+supplies, a battery charger and an RTC. So far only bindings for the two stepup
+DCDC converters are defined. Other DCDC and LDO supplies are configured, using
+standard regulator properties, they must belong to a sub-node, called
+"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
+configuration should be placed in a subnode, called "backlight."
+
+Compulsory properties:
+- compatible		: must be "ams,as3711"
+- reg			: specifies the I2C address
+
+To use the SU1 converter as a backlight source the following two properties must
+be provided:
+- su1-dev		: framebuffer phandle
+- su1-max-uA		: maximum current
+
+To use the SU2 converter as a backlight source the following two properties must
+be provided:
+- su2-dev		: framebuffer phandle
+- su1-max-uA		: maximum current
+
+Additionally one of these properties must be provided to select the type of
+feedback used:
+- su2-feedback-voltage	: voltage feedback is used
+- su2-feedback-curr1	: CURR1 input used for current feedback
+- su2-feedback-curr2	: CURR2 input used for current feedback
+- su2-feedback-curr3	: CURR3 input used for current feedback
+- su2-feedback-curr-auto: automatic current feedback selection
+
+and one of these to select the over-voltage protection pin
+- su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
+- su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
+- su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
+- su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
+
+If "su2-feedback-curr-auto" is selected, one or more of the following properties
+have to be specified:
+- su2-auto-curr1	: use CURR1 input for current feedback
+- su2-auto-curr2	: use CURR2 input for current feedback
+- su2-auto-curr3	: use CURR3 input for current feedback
+
+Example:
+
+as3711@40 {
+	compatible = "ams,as3711";
+	reg = <0x40>;
+
+	regulators {
+		sd4 {
+			regulator-name = "1.215V";
+			regulator-min-microvolt = <1215000>;
+			regulator-max-microvolt = <1235000>;
+		};
+		ldo2 {
+			regulator-name = "2.8V CPU";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+
+	backlight {
+		compatible = "ams,as3711-bl";
+		su2-dev = <&lcdc>;
+		su2-max-uA = <36000>;
+		su2-feedback-curr-auto;
+		su2-fbprot-gpio4;
+		su2-auto-curr1;
+		su2-auto-curr2;
+		su2-auto-curr3;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
new file mode 100644
index 0000000000..2a665741d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -0,0 +1,214 @@
+* ams AS3722 Power management IC.
+
+Required properties:
+-------------------
+- compatible: Must be "ams,as3722".
+- reg: I2C device address.
+- interrupt-controller: AS3722 has internal interrupt controller which takes the
+  interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
+  as external input.
+- #interrupt-cells: Should be set to 2 for IRQ number and flags.
+  The first cell is the IRQ number. IRQ numbers for different interrupt source
+  of AS3722 are defined at dt-bindings/mfd/as3722.h
+  The second cell is the flags, encoded as the trigger masks from binding document
+	interrupts.txt, using dt-bindings/irq.
+
+Optional properties:
+--------------------
+- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on
+	interrupt pin. Missing this will disable internal pullup on INT pin.
+- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on
+	i2c scl/sda pins. Missing this will disable internal pullup on i2c
+	scl/sda lines.
+- ams,enable-ac-ok-power-on: Boolean property, to enable exit out of power off
+	mode with AC_OK pin (pin enabled in power off mode).
+
+Optional submodule and their properties:
+=======================================
+
+Pinmux and GPIO:
+===============
+Device has 8 GPIO pins which can be configured as GPIO as well as the special IO
+functions.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Following are properties which is needed if GPIO and pinmux functionality
+is required:
+    Required properties:
+    -------------------
+	- gpio-controller: Marks the device node as a GPIO controller.
+	- #gpio-cells: Number of GPIO cells. Refer to binding document
+			gpio/gpio.txt
+
+    Optional properties:
+    --------------------
+	Following properties are require if pin control setting is required
+	at boot.
+	- pinctrl-names: A pinctrl state named "default" be defined, using the
+		bindings in pinctrl/pinctrl-bindings.txt.
+	- pinctrl[0...n]: Properties to contain the phandle that refer to
+		different nodes of pin control settings. These nodes represents
+		the pin control setting of state 0 to state n. Each of these
+		nodes contains different subnodes to represents some desired
+		configuration for a list of pins. This configuration can
+		include the mux function to select on those pin(s), and
+		various pin configuration parameters, such as pull-up,
+		open drain.
+
+		Each subnode have following properties:
+		Required properties:
+		    - pins: List of pins. Valid values of pins properties are:
+				gpio0, gpio1, gpio2, gpio3, gpio4, gpio5,
+				gpio6, gpio7
+
+		Optional properties:
+			function, bias-disable, bias-pull-up, bias-pull-down,
+			bias-high-impedance, drive-open-drain.
+
+			Valid values for function properties are:
+				gpio, interrupt-out, gpio-in-interrupt,
+				vsup-vbat-low-undebounce-out,
+				vsup-vbat-low-debounce-out,
+				voltage-in-standby, oc-pg-sd0, oc-pg-sd6,
+				powergood-out, pwm-in, pwm-out, clk32k-out,
+				watchdog-in, soft-reset-in
+
+Regulators:
+===========
+Device has multiple DCDC and LDOs. The node "regulators" is require if regulator
+functionality is needed.
+
+Following are properties of regulator subnode.
+
+    Optional properties:
+    -------------------
+	The input supply of regulators are the optional properties on the
+	regulator node. The input supply of these regulators are provided
+	through following properties:
+		vsup-sd2-supply: Input supply for SD2.
+		vsup-sd3-supply: Input supply for SD3.
+		vsup-sd4-supply: Input supply for SD4.
+		vsup-sd5-supply: Input supply for SD5.
+		vin-ldo0-supply: Input supply for LDO0.
+		vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+		vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+		vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+		vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+		vin-ldo11-supply: Input supply for LDO11.
+
+    Optional sub nodes for regulators:
+    ---------------------------------
+	The subnodes name is the name of regulator and it must be one of:
+	sd[0-6], ldo[0-7], ldo[9-11]
+
+	Each sub-node should contain the constraints and initialization
+	information for that regulator. See regulator.txt for a description
+	of standard properties for these sub-nodes.
+	Additional optional custom properties  are listed below.
+		ams,ext-control: External control of the rail. The option of
+			this properties will tell which external input is
+			controlling this rail. Valid values are 0, 1, 2 ad 3.
+			0: There is no external control of this rail.
+			1: Rail is controlled by ENABLE1 input pin.
+			2: Rail is controlled by ENABLE2 input pin.
+			3: Rail is controlled by ENABLE3 input pin.
+			Missing this property on DT will be assume as no
+			external control. The external control pin macros
+			are defined @dt-bindings/mfd/as3722.h
+
+		ams,enable-tracking: Enable tracking with SD1, only supported
+			by LDO3.
+
+Power-off:
+=========
+AS3722 supports the system power off by turning off all its rails.
+The device node should have the following properties to enable this
+functionality
+ams,system-power-controller: Boolean, to enable the power off functionality
+        through this device.
+
+Example:
+--------
+#include <dt-bindings/mfd/as3722.h>
+...
+ams3722 {
+	compatible = "ams,as3722";
+	reg = <0x48>;
+
+	ams,system-power-controller;
+
+	interrupt-parent = <&intc>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&as3722_default>;
+
+	as3722_default: pinmux {
+			gpio0 {
+				pins = "gpio0";
+				function = "gpio";
+				bias-pull-down;
+			};
+
+			gpio1_2_4_7 {
+				pins = "gpio1", "gpio2", "gpio4", "gpio7";
+				function = "gpio";
+				bias-pull-up;
+			};
+
+			gpio5 {
+				pins = "gpio5";
+				function = "clk32k_out";
+			};
+	}
+
+	regulators {
+			vsup-sd2-supply = <...>;
+			...
+
+			sd0 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <2>;
+			};
+
+			sd1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <1>;
+			};
+
+			sd2 {
+				regulator-name = "vddio_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			sd4 {
+				regulator-name = "avdd-hdmi-pex";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+			};
+
+			sd5 {
+				regulator-name = "vdd-1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+			....
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
new file mode 100644
index 0000000000..1689b986f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed System Control Unit
+
+description:
+  The Aspeed System Control Unit manages the global behaviour of the SoC,
+  configuring elements such as clocks, pinmux, and reset.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-scu
+          - aspeed,ast2500-scu
+          - aspeed,ast2600-scu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+patternProperties:
+  '^p2a-control@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+    type: object
+
+  '^pinctrl(@[0-9a-f]+)?$':
+    oneOf:
+      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+
+  '^interrupt-controller@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+    type: object
+
+  '^silicon-id@[0-9a-f]+$':
+    description: Unique hardware silicon identifiers within the SoC
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-silicon-id
+              - aspeed,ast2500-silicon-id
+              - aspeed,ast2600-silicon-id
+          - const: aspeed,silicon-id
+
+      reg:
+        description:
+          The reg should be the unique silicon id register, and not backwards
+          compatible one in eg. the 2600.
+        minItems: 1
+        items:
+          - description: silicon id information registers
+          - description: unique chip id registers
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        silicon-id@7c {
+            compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+            reg = <0x7c 0x4>, <0x150 0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
new file mode 100644
index 0000000000..aea5370efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for Aspeed SoC Display Controller (GFX)
+
+The Aspeed SoC Display Controller primarily does as its name suggests, but also
+participates in pinmux requests on the g5 SoCs. It is therefore considered a
+syscon device.
+
+Required properties:
+- compatible:		"aspeed,ast2500-gfx", "syscon"
+- reg:			contains offset/length value of the GFX memory
+			region.
+
+Example:
+
+gfx: display@1e6e6000 {
+	compatible = "aspeed,ast2500-gfx", "syscon";
+	reg = <0x1e6e6000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
new file mode 100644
index 0000000000..5dfe77aca1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2021 Aspeed Tehchnology Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Low Pin Count (LPC) Bus Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+  peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+  primary use case of the Aspeed LPC controller is as a slave on the bus
+  (typically in a Baseboard Management Controller SoC), but under certain
+  conditions it can also take the role of bus master.
+
+  The LPC controller is represented as a multi-function device to account for the
+  mix of functionality, which includes, but is not limited to
+
+  * An IPMI Block Transfer[2] Controller
+
+  * An LPC Host Interface Controller manages functions exposed to the host such
+    as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+    management and bus snoop configuration.
+
+  * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom
+    hardware management protocols for handover between the host and baseboard
+    management controller.
+
+  Additionally the state of the LPC controller influences the pinmux
+  configuration, therefore the host portion of the controller is exposed as a
+  syscon as a means to arbitrate access.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-lpc-v2
+          - aspeed,ast2500-lpc-v2
+          - aspeed,ast2600-lpc-v2
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^lpc-ctrl@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description: |
+      The LPC Host Interface Controller manages functions exposed to the host such as
+      LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management
+      and bus snoop configuration.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-ctrl
+              - aspeed,ast2500-lpc-ctrl
+              - aspeed,ast2600-lpc-ctrl
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      memory-region:
+        maxItems: 1
+        description: handle to memory reservation for the LPC to AHB mapping region
+
+      flash:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping
+
+    required:
+      - compatible
+      - clocks
+
+  "^reset-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description:
+      The UARTs present in the ASPEED SoC can have their resets tied to the reset
+      state of the LPC bus. Some systems may chose to modify this configuration
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-reset
+              - aspeed,ast2500-lpc-reset
+              - aspeed,ast2600-lpc-reset
+
+      reg:
+        maxItems: 1
+
+      '#reset-cells':
+        const: 1
+
+    required:
+      - compatible
+      - '#reset-cells'
+
+  "^lpc-snoop@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description:
+      The LPC snoop interface allows the BMC to listen on and record the data
+      bytes written by the Host to the targeted LPC I/O pots.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-snoop
+              - aspeed,ast2500-lpc-snoop
+              - aspeed,ast2600-lpc-snoop
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      snoop-ports:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: The LPC I/O ports to snoop
+
+    required:
+      - compatible
+      - interrupts
+      - snoop-ports
+
+  "^uart-routing@[0-9a-f]+$":
+    $ref: /schemas/soc/aspeed/uart-routing.yaml#
+    description: The UART routing control under LPC register space
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        lpc_ctrl: lpc-ctrl@80 {
+            compatible = "aspeed,ast2600-lpc-ctrl";
+            reg = <0x80 0x80>;
+            clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+            memory-region = <&flash_memory>;
+            flash = <&spi>;
+        };
+
+        lpc_reset: reset-controller@98 {
+            compatible = "aspeed,ast2600-lpc-reset";
+            reg = <0x98 0x4>;
+            #reset-cells = <1>;
+        };
+
+        lpc_snoop: lpc-snoop@90 {
+            compatible = "aspeed,ast2600-lpc-snoop";
+            reg = <0x90 0x8>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+            snoop-ports = <0x80>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
new file mode 100644
index 0000000000..af692e8833
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -0,0 +1,64 @@
+* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
+
+The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
+controller and an USART. Only one function can be used at a time and is chosen
+at boot time according to the device tree.
+
+Required properties:
+- compatible:		Should be "atmel,sama5d2-flexcom"
+			or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
+- reg:			Should be the offset/length value for Flexcom dedicated
+			I/O registers (without USART, TWI or SPI registers).
+- clocks:		Should be the Flexcom peripheral clock from PMC.
+- #address-cells:	Should be <1>
+- #size-cells:		Should be <1>
+- ranges:		Should be one range for the full I/O register region
+			(including USART, TWI and SPI registers).
+- atmel,flexcom-mode:	Should be one of the following values:
+			- <1> for USART
+			- <2> for SPI
+			- <3> for I2C
+
+Required child:
+A single available child device of type matching the "atmel,flexcom-mode"
+property.
+
+The phandle provided by the clocks property of the child is the same as one for
+the Flexcom parent.
+
+For other properties, please refer to the documentations of the respective
+device:
+- ../serial/atmel-usart.txt
+- ../spi/spi_atmel.txt
+- ../i2c/i2c-at91.txt
+
+Example:
+
+flexcom@f8034000 {
+	compatible = "atmel,sama5d2-flexcom";
+	reg = <0xf8034000 0x200>;
+	clocks = <&flx0_clk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0xf8034000 0x800>;
+	atmel,flexcom-mode = <2>;
+
+	spi@400 {
+		compatible = "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&flx0_clk>;
+		clock-names = "spi_clk";
+		atmel,fifo-size = <32>;
+
+		flash@0 {
+			compatible = "atmel,at25f512b";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
new file mode 100644
index 0000000000..3c989d1760
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@@ -0,0 +1,18 @@
+* Device tree bindings for Atmel GPBR (General Purpose Backup Registers)
+
+The GPBR are a set of battery-backed registers.
+
+Required properties:
+- compatible:		Should be one of the following:
+			"atmel,at91sam9260-gpbr", "syscon"
+			"microchip,sam9x60-gpbr", "syscon"
+			"microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon"
+- reg:			contains offset/length value of the GPBR memory
+			region.
+
+Example:
+
+gpbr: gpbr@fffffd50 {
+	compatible = "atmel,at91sam9260-gpbr", "syscon";
+	reg = <0xfffffd50 0x10>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 0000000000..7de696eefa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -0,0 +1,56 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+   "atmel,at91sam9n12-hlcdc"
+   "atmel,at91sam9x5-hlcdc"
+   "atmel,sama5d2-hlcdc"
+   "atmel,sama5d3-hlcdc"
+   "atmel,sama5d4-hlcdc"
+   "microchip,sam9x60-hlcdc"
+   "microchip,sam9x75-xlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+   Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+ - interrupts: should contain the description of the HLCDC interrupt line
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see ../display/atmel/hlcdc-dc.txt
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+		hlcdc-display-controller {
+			compatible = "atmel,hlcdc-display-controller";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				hlcdc_panel_output: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
new file mode 100644
index 0000000000..6e5f83614e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -0,0 +1,26 @@
+* Device tree bindings for Atmel Bus Matrix
+
+The Bus Matrix registers are used to configure Atmel SoCs internal bus
+behavior (master/slave priorities, undefined burst length type, ...)
+
+Required properties:
+- compatible:		Should be one of the following
+			"atmel,at91sam9260-matrix", "syscon"
+			"atmel,at91sam9261-matrix", "syscon"
+			"atmel,at91sam9263-matrix", "syscon"
+			"atmel,at91sam9rl-matrix", "syscon"
+			"atmel,at91sam9g45-matrix", "syscon"
+			"atmel,at91sam9n12-matrix", "syscon"
+			"atmel,at91sam9x5-matrix", "syscon"
+			"atmel,sama5d3-matrix", "syscon"
+			"microchip,sam9x60-matrix", "syscon"
+			"microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon"
+- reg:			Contains offset/length value of the Bus Matrix
+			memory region.
+
+Example:
+
+matrix: matrix@ffffec00 {
+	compatible = "atmel,sama5d3-matrix", "syscon";
+	reg = <0xffffec00 0x200>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
new file mode 100644
index 0000000000..fd62add38a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -0,0 +1,22 @@
+* Device tree bindings for Atmel SMC (Static Memory Controller)
+
+The SMC registers are used to configure Atmel EBI (External Bus Interface)
+to interface with standard memory devices (NAND, NOR, SRAM or specialized
+devices like FPGAs).
+
+Required properties:
+- compatible:		Should be one of the following
+			"atmel,at91sam9260-smc", "syscon"
+			"atmel,sama5d3-smc", "syscon"
+			"atmel,sama5d2-smc", "syscon"
+			"microchip,sam9x60-smc", "syscon"
+			"microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon"
+- reg:			Contains offset/length value of the SMC memory
+			region.
+
+Example:
+
+smc: smc@ffffc000 {
+	compatible = "atmel,sama5d3-smc", "syscon";
+	reg = <0xffffc000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/bfticu.txt b/Documentation/devicetree/bindings/mfd/bfticu.txt
new file mode 100644
index 0000000000..538192fda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/bfticu.txt
@@ -0,0 +1,24 @@
+KEYMILE bfticu Chassis Management FPGA
+
+The bfticu is a multifunction device that manages the whole chassis.
+Its main functionality is to collect IRQs from the whole chassis and signals
+them to a single controller.
+
+Required properties:
+- compatible: "keymile,bfticu"
+- interrupt-controller: the bfticu FPGA is an interrupt controller
+- interrupts: the main IRQ line to signal the collected IRQs
+- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
+  of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+	chassis-mgmt@3,0 {
+		compatible = "keymile,bfticu";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <3 0 0x100>;
+		interrupt-parent = <&mpic>;
+		interrupts = <6 1 0 0>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
new file mode 100644
index 0000000000..be51a15e05
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
@@ -0,0 +1,39 @@
+-------------------------------
+BCM590xx Power Management Units
+-------------------------------
+
+Required properties:
+- compatible: "brcm,bcm59056"
+- reg: I2C slave address
+- interrupts: interrupt for the PMU. Generic interrupt client node bindings
+  are described in interrupt-controller/interrupts.txt
+
+------------------
+Voltage Regulators
+------------------
+
+Optional child nodes:
+- regulators: container node for regulators following the generic
+  regulator binding in regulator/regulator.txt
+
+  The valid regulator node names for BCM59056 are:
+  	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
+	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
+	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
+	vbus
+
+Example:
+	pmu: bcm59056@8 {
+		compatible = "brcm,bcm59056";
+		reg = <0x08>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		regulators {
+			rfldo_reg: rfldo {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
new file mode 100644
index 0000000000..cb480162f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6318 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6318-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6318-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 50>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@10 {
+        compatible = "brcm,bcm6318-pinctrl";
+        reg = <0x18 0x10>, <0x54 0x18>;
+
+        pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+          function = "ephy0_spd_led";
+          pins = "gpio0";
+        };
+
+        pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+          function = "ephy1_spd_led";
+          pins = "gpio1";
+        };
+
+        pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+          function = "ephy2_spd_led";
+          pins = "gpio2";
+        };
+
+        pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+          function = "ephy3_spd_led";
+          pins = "gpio3";
+        };
+
+        pinctrl_ephy0_act_led: ephy0_act_led-pins {
+          function = "ephy0_act_led";
+          pins = "gpio4";
+        };
+
+        pinctrl_ephy1_act_led: ephy1_act_led-pins {
+          function = "ephy1_act_led";
+          pins = "gpio5";
+        };
+
+        pinctrl_ephy2_act_led: ephy2_act_led-pins {
+          function = "ephy2_act_led";
+          pins = "gpio6";
+        };
+
+        pinctrl_ephy3_act_led: ephy3_act_led-pins {
+          function = "ephy3_act_led";
+          pins = "gpio7";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio6";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio7";
+          };
+        };
+
+        pinctrl_inet_act_led: inet_act_led-pins {
+          function = "inet_act_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_inet_fail_led: inet_fail_led-pins {
+          function = "inet_fail_led";
+          pins = "gpio9";
+        };
+
+        pinctrl_dsl_led: dsl_led-pins {
+          function = "dsl_led";
+          pins = "gpio10";
+        };
+
+        pinctrl_post_fail_led: post_fail_led-pins {
+          function = "post_fail_led";
+          pins = "gpio11";
+        };
+
+        pinctrl_wlan_wps_led: wlan_wps_led-pins {
+          function = "wlan_wps_led";
+          pins = "gpio12";
+        };
+
+        pinctrl_usb_pwron: usb_pwron-pins {
+          function = "usb_pwron";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_active: usb_active-pins {
+          function = "usb_active";
+          pins = "gpio40";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
new file mode 100644
index 0000000000..c14def1b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM63268 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm63268-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@100000c0 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x100000c0 0x80>;
+      ranges = <0 0x100000c0 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm63268-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 52>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@10 {
+        compatible = "brcm,bcm63268-pinctrl";
+        reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio0";
+          };
+
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio1";
+          };
+        };
+
+        pinctrl_hsspi_cs4: hsspi_cs4-pins {
+          function = "hsspi_cs4";
+          pins = "gpio16";
+        };
+
+        pinctrl_hsspi_cs5: hsspi_cs5-pins {
+          function = "hsspi_cs5";
+          pins = "gpio17";
+        };
+
+        pinctrl_hsspi_cs6: hsspi_cs6-pins {
+          function = "hsspi_cs6";
+          pins = "gpio8";
+        };
+
+        pinctrl_hsspi_cs7: hsspi_cs7-pins {
+          function = "hsspi_cs7";
+          pins = "gpio9";
+        };
+
+        pinctrl_adsl_spi: adsl_spi-pins {
+          pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+            function = "adsl_spi_miso";
+            pins = "gpio18";
+          };
+
+          pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+            function = "adsl_spi_mosi";
+            pins = "gpio19";
+          };
+        };
+
+        pinctrl_vreq_clk: vreq_clk-pins {
+          function = "vreq_clk";
+          pins = "gpio22";
+        };
+
+        pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
+          function = "pcie_clkreq_b";
+          pins = "gpio23";
+        };
+
+        pinctrl_robosw_led_clk: robosw_led_clk-pins {
+          function = "robosw_led_clk";
+          pins = "gpio30";
+        };
+
+        pinctrl_robosw_led_data: robosw_led_data-pins {
+          function = "robosw_led_data";
+          pins = "gpio31";
+        };
+
+        pinctrl_nand: nand-pins {
+          function = "nand";
+          group = "nand_grp";
+        };
+
+        pinctrl_gpio35_alt: gpio35_alt-pins {
+          function = "gpio35_alt";
+          pin = "gpio35";
+        };
+
+        pinctrl_dectpd: dectpd-pins {
+          function = "dectpd";
+          group = "dectpd_grp";
+        };
+
+        pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
+          function = "vdsl_phy_override_0";
+          group = "vdsl_phy_override_0_grp";
+        };
+
+        pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
+          function = "vdsl_phy_override_1";
+          group = "vdsl_phy_override_1_grp";
+        };
+
+        pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
+          function = "vdsl_phy_override_2";
+          group = "vdsl_phy_override_2_grp";
+        };
+
+        pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
+          function = "vdsl_phy_override_3";
+          group = "vdsl_phy_override_3_grp";
+        };
+
+        pinctrl_dsl_gpio8: dsl_gpio8-pins {
+          function = "dsl_gpio8";
+          group = "dsl_gpio8";
+        };
+
+        pinctrl_dsl_gpio9: dsl_gpio9-pins {
+          function = "dsl_gpio9";
+          group = "dsl_gpio9";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
new file mode 100644
index 0000000000..5f48209ed4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6328 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6328-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6328-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 32>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6328-pinctrl";
+        reg = <0x18 0x10>;
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio6";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio7";
+          };
+        };
+
+        pinctrl_inet_act_led: inet_act_led-pins {
+          function = "inet_act_led";
+          pins = "gpio11";
+        };
+
+        pinctrl_pcie_clkreq: pcie_clkreq-pins {
+          function = "pcie_clkreq";
+          pins = "gpio16";
+        };
+
+        pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+          function = "led";
+          pins = "gpio17";
+        };
+
+        pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+          function = "led";
+          pins = "gpio18";
+        };
+
+        pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+          function = "led";
+          pins = "gpio19";
+        };
+
+        pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+          function = "led";
+          pins = "gpio20";
+        };
+
+        pinctrl_ephy0_act_led: ephy0_act_led-pins {
+          function = "ephy0_act_led";
+          pins = "gpio25";
+        };
+
+        pinctrl_ephy1_act_led: ephy1_act_led-pins {
+          function = "ephy1_act_led";
+          pins = "gpio26";
+        };
+
+        pinctrl_ephy2_act_led: ephy2_act_led-pins {
+          function = "ephy2_act_led";
+          pins = "gpio27";
+        };
+
+        pinctrl_ephy3_act_led: ephy3_act_led-pins {
+          function = "ephy3_act_led";
+          pins = "gpio28";
+        };
+
+        pinctrl_hsspi_cs1: hsspi_cs1-pins {
+          function = "hsspi_cs1";
+          pins = "hsspi_cs1";
+        };
+
+        pinctrl_usb_port1_device: usb_port1_device-pins {
+          function = "usb_device_port";
+          pins = "usb_port1";
+        };
+
+        pinctrl_usb_port1_host: usb_port1_host-pins {
+          function = "usb_host_port";
+          pins = "usb_port1";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
new file mode 100644
index 0000000000..f1f4629565
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6358 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6358-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@fffe0080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0xfffe0080 0x80>;
+      ranges = <0 0xfffe0080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6358-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 40>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6358-pinctrl";
+        reg = <0x18 0x4>;
+
+        pinctrl_ebi_cs: ebi_cs-pins {
+          function = "ebi_cs";
+          groups = "ebi_cs_grp";
+        };
+
+        pinctrl_uart1: uart1-pins {
+          function = "uart1";
+          groups = "uart1_grp";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          function = "serial_led";
+          groups = "serial_led_grp";
+        };
+
+        pinctrl_legacy_led: legacy_led-pins {
+          function = "legacy_led";
+          groups = "legacy_led_grp";
+        };
+
+        pinctrl_led: led-pins {
+          function = "led";
+          groups = "led_grp";
+        };
+
+        pinctrl_spi_cs_23: spi_cs-pins {
+          function = "spi_cs";
+          groups = "spi_cs_grp";
+        };
+
+        pinctrl_utopia: utopia-pins {
+          function = "utopia";
+          groups = "utopia_grp";
+        };
+
+        pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
+          function = "pwm_syn_clk";
+          groups = "pwm_syn_clk_grp";
+        };
+
+        pinctrl_sys_irq: sys_irq-pins {
+          function = "sys_irq";
+          groups = "sys_irq_grp";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
new file mode 100644
index 0000000000..4d594739b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6362 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6362-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6362-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 48>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6362-pinctrl";
+        reg = <0x18 0x10>, <0x38 0x4>;
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio0";
+        };
+
+        pinctrl_sys_irq: sys_irq-pins {
+          function = "sys_irq";
+          pins = "gpio1";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio2";
+          };
+
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio3";
+          };
+        };
+
+        pinctrl_robosw_led_data: robosw_led_data-pins {
+          function = "robosw_led_data";
+          pins = "gpio4";
+        };
+
+        pinctrl_robosw_led_clk: robosw_led_clk-pins {
+          function = "robosw_led_clk";
+          pins = "gpio5";
+        };
+
+        pinctrl_robosw_led0: robosw_led0-pins {
+          function = "robosw_led0";
+          pins = "gpio6";
+        };
+
+        pinctrl_robosw_led1: robosw_led1-pins {
+          function = "robosw_led1";
+          pins = "gpio7";
+        };
+
+        pinctrl_inet_led: inet_led-pins {
+          function = "inet_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_spi_cs2: spi_cs2-pins {
+          function = "spi_cs2";
+          pins = "gpio9";
+        };
+
+        pinctrl_spi_cs3: spi_cs3-pins {
+          function = "spi_cs3";
+          pins = "gpio10";
+        };
+
+        pinctrl_ntr_pulse: ntr_pulse-pins {
+          function = "ntr_pulse";
+          pins = "gpio11";
+        };
+
+        pinctrl_uart1_scts: uart1_scts-pins {
+          function = "uart1_scts";
+          pins = "gpio12";
+        };
+
+        pinctrl_uart1_srts: uart1_srts-pins {
+          function = "uart1_srts";
+          pins = "gpio13";
+        };
+
+        pinctrl_uart1: uart1-pins {
+          pinctrl_uart1_sdin: uart1_sdin-pins {
+            function = "uart1_sdin";
+            pins = "gpio14";
+          };
+
+          pinctrl_uart1_sdout: uart1_sdout-pins {
+            function = "uart1_sdout";
+            pins = "gpio15";
+          };
+        };
+
+        pinctrl_adsl_spi: adsl_spi-pins {
+          pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+            function = "adsl_spi_miso";
+            pins = "gpio16";
+          };
+
+          pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+            function = "adsl_spi_mosi";
+            pins = "gpio17";
+          };
+
+          pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
+            function = "adsl_spi_clk";
+            pins = "gpio18";
+          };
+
+          pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
+            function = "adsl_spi_cs";
+            pins = "gpio19";
+          };
+        };
+
+        pinctrl_ephy0_led: ephy0_led-pins {
+          function = "ephy0_led";
+          pins = "gpio20";
+        };
+
+        pinctrl_ephy1_led: ephy1_led-pins {
+          function = "ephy1_led";
+          pins = "gpio21";
+        };
+
+        pinctrl_ephy2_led: ephy2_led-pins {
+          function = "ephy2_led";
+          pins = "gpio22";
+        };
+
+        pinctrl_ephy3_led: ephy3_led-pins {
+          function = "ephy3_led";
+          pins = "gpio23";
+        };
+
+        pinctrl_ext_irq0: ext_irq0-pins {
+          function = "ext_irq0";
+          pins = "gpio24";
+        };
+
+        pinctrl_ext_irq1: ext_irq1-pins {
+          function = "ext_irq1";
+          pins = "gpio25";
+        };
+
+        pinctrl_ext_irq2: ext_irq2-pins {
+          function = "ext_irq2";
+          pins = "gpio26";
+        };
+
+        pinctrl_ext_irq3: ext_irq3-pins {
+          function = "ext_irq3";
+          pins = "gpio27";
+        };
+
+        pinctrl_nand: nand-pins {
+          function = "nand";
+          group = "nand_grp";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
new file mode 100644
index 0000000000..aae83d4328
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 GPIO System Controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Broadcom BCM6368 SoC GPIO system controller which provides a register map
+  for controlling the GPIO and pins of the SoC.
+
+properties:
+  "#address-cells": true
+
+  "#size-cells": true
+
+  compatible:
+    items:
+      - const: brcm,bcm6368-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
+    description:
+      GPIO controller for the SoC GPIOs. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
+
+  "^pinctrl@[0-9a-f]+$":
+    # Child node
+    type: object
+    $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml
+    description:
+      Pin controller for the SoC pins. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml.
+
+required:
+  - "#address-cells"
+  - compatible
+  - ranges
+  - reg
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10000080 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x10000080 0x80>;
+      ranges = <0 0x10000080 0x80>;
+
+      gpio@0 {
+        compatible = "brcm,bcm6368-gpio";
+        reg-names = "dirout", "dat";
+        reg = <0x0 0x8>, <0x8 0x8>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 38>;
+        #gpio-cells = <2>;
+      };
+
+      pinctrl: pinctrl@18 {
+        compatible = "brcm,bcm6368-pinctrl";
+        reg = <0x18 0x4>, <0x38 0x4>;
+
+        pinctrl_analog_afe_0: analog_afe_0-pins {
+          function = "analog_afe_0";
+          pins = "gpio0";
+        };
+
+        pinctrl_analog_afe_1: analog_afe_1-pins {
+          function = "analog_afe_1";
+          pins = "gpio1";
+        };
+
+        pinctrl_sys_irq: sys_irq-pins {
+          function = "sys_irq";
+          pins = "gpio2";
+        };
+
+        pinctrl_serial_led: serial_led-pins {
+          pinctrl_serial_led_data: serial_led_data-pins {
+            function = "serial_led_data";
+            pins = "gpio3";
+          };
+
+          pinctrl_serial_led_clk: serial_led_clk-pins {
+            function = "serial_led_clk";
+            pins = "gpio4";
+          };
+        };
+
+        pinctrl_inet_led: inet_led-pins {
+          function = "inet_led";
+          pins = "gpio5";
+        };
+
+        pinctrl_ephy0_led: ephy0_led-pins {
+          function = "ephy0_led";
+          pins = "gpio6";
+        };
+
+        pinctrl_ephy1_led: ephy1_led-pins {
+          function = "ephy1_led";
+          pins = "gpio7";
+        };
+
+        pinctrl_ephy2_led: ephy2_led-pins {
+          function = "ephy2_led";
+          pins = "gpio8";
+        };
+
+        pinctrl_ephy3_led: ephy3_led-pins {
+          function = "ephy3_led";
+          pins = "gpio9";
+        };
+
+        pinctrl_robosw_led_data: robosw_led_data-pins {
+          function = "robosw_led_data";
+          pins = "gpio10";
+        };
+
+        pinctrl_robosw_led_clk: robosw_led_clk-pins {
+          function = "robosw_led_clk";
+          pins = "gpio11";
+        };
+
+        pinctrl_robosw_led0: robosw_led0-pins {
+          function = "robosw_led0";
+          pins = "gpio12";
+        };
+
+        pinctrl_robosw_led1: robosw_led1-pins {
+          function = "robosw_led1";
+          pins = "gpio13";
+        };
+
+        pinctrl_usb_device_led: usb_device_led-pins {
+          function = "usb_device_led";
+          pins = "gpio14";
+        };
+
+        pinctrl_pci: pci-pins {
+          pinctrl_pci_req1: pci_req1-pins {
+            function = "pci_req1";
+            pins = "gpio16";
+          };
+
+          pinctrl_pci_gnt1: pci_gnt1-pins {
+            function = "pci_gnt1";
+            pins = "gpio17";
+          };
+
+          pinctrl_pci_intb: pci_intb-pins {
+            function = "pci_intb";
+            pins = "gpio18";
+          };
+
+          pinctrl_pci_req0: pci_req0-pins {
+            function = "pci_req0";
+            pins = "gpio19";
+          };
+
+          pinctrl_pci_gnt0: pci_gnt0-pins {
+            function = "pci_gnt0";
+            pins = "gpio20";
+          };
+        };
+
+        pinctrl_pcmcia: pcmcia-pins {
+          pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
+            function = "pcmcia_cd1";
+            pins = "gpio22";
+          };
+
+          pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
+            function = "pcmcia_cd2";
+            pins = "gpio23";
+          };
+
+          pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
+            function = "pcmcia_vs1";
+            pins = "gpio24";
+          };
+
+          pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
+            function = "pcmcia_vs2";
+            pins = "gpio25";
+          };
+        };
+
+        pinctrl_ebi_cs2: ebi_cs2-pins {
+          function = "ebi_cs2";
+          pins = "gpio26";
+        };
+
+        pinctrl_ebi_cs3: ebi_cs3-pins {
+          function = "ebi_cs3";
+          pins = "gpio27";
+        };
+
+        pinctrl_spi_cs2: spi_cs2-pins {
+          function = "spi_cs2";
+          pins = "gpio28";
+        };
+
+        pinctrl_spi_cs3: spi_cs3-pins {
+          function = "spi_cs3";
+          pins = "gpio29";
+        };
+
+        pinctrl_spi_cs4: spi_cs4-pins {
+          function = "spi_cs4";
+          pins = "gpio30";
+        };
+
+        pinctrl_spi_cs5: spi_cs5-pins {
+          function = "spi_cs5";
+          pins = "gpio31";
+        };
+
+        pinctrl_uart1: uart1-pins {
+          function = "uart1";
+          group = "uart1_grp";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
new file mode 100644
index 0000000000..b85819fbb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom CRU
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
+  block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
+  clocks, pinctrl, USB PHY and thermal.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,ns-cru
+      - const: simple-mfd
+
+  reg:
+    description: CRU registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^clock-controller@[a-f0-9]+$':
+    $ref: ../clock/brcm,iproc-clocks.yaml
+
+  '^phy@[a-f0-9]+$':
+    $ref: ../phy/bcm-ns-usb2-phy.yaml
+
+  '^pinctrl@[a-f0-9]+$':
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
+  '^syscon@[a-f0-9]+$':
+    $ref: syscon.yaml
+
+  '^thermal@[a-f0-9]+$':
+    $ref: ../thermal/brcm,ns-thermal.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-nsp.h>
+    cru-bus@1800c100 {
+        compatible = "brcm,ns-cru", "simple-mfd";
+        reg = <0x1800c100 0x1d0>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@100 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-lcpll0";
+            reg = <0x100 0x14>;
+            clocks = <&osc>;
+            clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
+        };
+
+        clock-controller@140 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-genpll";
+            reg = <0x140 0x24>;
+            clocks = <&osc>;
+            clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
+                                 "iprocfast", "sata1", "sata2";
+        };
+
+        phy@164 {
+            compatible = "brcm,ns-usb2-phy";
+            reg = <0x164 0x4>;
+            brcm,syscon-clkset = <&clkset>;
+            clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+            clock-names = "phy-ref-clk";
+            #phy-cells = <0>;
+        };
+
+        clkset: syscon@180 {
+            compatible = "brcm,cru-clkset", "syscon";
+            reg = <0x180 0x4>;
+        };
+
+        pinctrl@1c0 {
+            compatible = "brcm,bcm4708-pinmux";
+            reg = <0x1c0 0x24>;
+            reg-names = "cru_gpio_control";
+        };
+
+        thermal@2c0 {
+            compatible = "brcm,ns-thermal";
+            reg = <0x2c0 0x10>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
new file mode 100644
index 0000000000..82f82e0695
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
@@ -0,0 +1,16 @@
+Broadcom iProc Chip Device Resource Unit (CDRU)
+
+Various Broadcom iProc SoCs have a set of registers that provide various
+chip specific device and resource configurations. This node allows access to
+these CDRU registers via syscon.
+
+Required properties:
+- compatible: should contain:
+		"brcm,sr-cdru", "syscon" for Stingray
+- reg: base address and range of the CDRU registers
+
+Example:
+	cdru: syscon@6641d000 {
+		compatible = "brcm,sr-cdru", "syscon";
+		reg = <0 0x6641d000 0 0x400>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
new file mode 100644
index 0000000000..4421e9771b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
@@ -0,0 +1,18 @@
+Broadcom iProc Multi Host Bridge (MHB)
+
+Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
+the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
+interface; 3) access to the Nitro (network processing) engine
+
+This node allows access to these MHB registers via syscon.
+
+Required properties:
+- compatible: should contain:
+		"brcm,sr-mhb", "syscon" for Stingray
+- reg: base address and range of the MHB registers
+
+Example:
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
new file mode 100644
index 0000000000..cff7d772a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's MISC block
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom's MISC is a hardware block used on some SoCs (e.g. bcm63xx and
+  bcm4908). It's used to implement some simple functions like a watchdog, PCIe
+  reset, UniMAC control and more.
+
+properties:
+  compatible:
+    items:
+      - const: brcm,misc
+      - const: simple-mfd
+
+  reg:
+    description: MISC block registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^reset-controller@[a-f0-9]+$':
+    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    misc@ff802600 {
+        compatible = "brcm,misc", "simple-mfd";
+        reg = <0xff802600 0xe4>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0xe4>;
+
+        reset-controller@44 {
+            compatible = "brcm,bcm4908-misc-pcie-reset";
+            reg = <0x44 0x4>;
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,twd.yaml b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
new file mode 100644
index 0000000000..e5136a37b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's Timer-Watchdog (aka TWD)
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908,
+  BCM63xx, BCM7038). There are few variants available (they differ slightly in
+  registers layout). This block consists of: timers, watchdog and optionally a
+  software reset handler.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-twd
+          - brcm,bcm7038-twd
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^timer@[a-f0-9]+$':
+    $ref: /schemas/timer/brcm,bcmbca-timer.yaml
+
+  '^watchdog@[a-f0-9]+$':
+    $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer-mfd@ff800400 {
+        compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+        reg = <0xff800400 0x4c>;
+        ranges = <0x00000000 0xff800400 0x4c>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        timer@0 {
+            compatible = "brcm,bcm63138-timer";
+            reg = <0x0 0x28>;
+        };
+
+        watchdog@28 {
+            compatible = "brcm,bcm7038-wdt";
+            reg = <0x28 0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
new file mode 100644
index 0000000000..3b3beab9db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 System Controller
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+  Canaan Inc. Kendryte K210 SoC system controller which provides a
+  register map for controlling the clocks, reset signals and pin power
+  domains of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: canaan,k210-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  clocks:
+    maxItems: 1
+    description:
+      System controller Advanced Power Bus (APB) interface clock source.
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    # Child node
+    type: object
+    $ref: ../clock/canaan,k210-clk.yaml
+    description:
+      Clock controller for the SoC clocks. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml.
+
+  reset-controller:
+    # Child node
+    type: object
+    $ref: ../reset/canaan,k210-rst.yaml
+    description:
+      Reset controller for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml.
+
+  syscon-reboot:
+    # Child node
+    type: object
+    $ref: ../power/reset/syscon-reboot.yaml
+    description:
+      Reboot method for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml.
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    clocks {
+      in0: oscllator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    sysctl: syscon@50440000 {
+      compatible = "canaan,k210-sysctl",
+                   "syscon", "simple-mfd";
+      reg = <0x50440000 0x100>;
+      clocks = <&sysclk K210_CLK_APB1>;
+      clock-names = "pclk";
+
+      sysclk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "canaan,k210-clk";
+        clocks = <&in0>;
+      };
+
+      sysrst: reset-controller {
+        compatible = "canaan,k210-rst";
+        #reset-cells = <1>;
+      };
+
+      reboot: syscon-reboot {
+        compatible = "syscon-reboot";
+        regmap = <&sysctl>;
+        offset = <48>;
+        mask = <1>;
+        value = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..ebbedabb2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -0,0 +1,365 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of
+  various application processor systems to provide a full evaluation
+  platform.  Audio system topology, clocking and power can all be
+  controlled through the Lochnagar, allowing the device under test
+  to be used in a variety of possible use cases.
+
+  Also see these documents for generic binding information:
+    [1] GPIO : ../gpio/gpio.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/pinctrl/lochnagar.h
+    [3] include/dt-bindings/clock/lochnagar.h
+
+  And these documents for the required sub-node binding details:
+    [4] Clock: ../clock/cirrus,lochnagar.yaml
+    [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
+    [6] Sound: ../sound/cirrus,lochnagar.yaml
+    [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - cirrus,lochnagar2
+    then:
+      properties:
+        lochnagar-hwmon:
+          type: object
+          $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+        lochnagar-sc:
+          type: object
+          $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1
+      - cirrus,lochnagar2
+
+  reg:
+    const: 0x22
+
+  reset-gpios:
+    maxItems: 1
+
+  present-gpios:
+    description: |
+      Host present line, indicating the presence of a
+      host system, see [1]. This can be omitted if the present line is
+      tied in hardware.
+    maxItems: 1
+
+  lochnagar-clk:
+    type: object
+    $ref: /schemas/clock/cirrus,lochnagar.yaml#
+
+  lochnagar-pmic32k:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+  lochnagar-clk12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  lochnagar-clk11m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 11298600
+
+  lochnagar-clk24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-clk22m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 22579200
+
+  lochnagar-clk8m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 8192000
+
+  lochnagar-usb24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-usb12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+
+  lochnagar-hwmon:
+    type: object
+    $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+  lochnagar-sc:
+    type: object
+    $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+  VDDCORE:
+    description:
+      Initialisation data for the VDDCORE regulator, which supplies the
+      CODECs digital core if not being provided by an internal regulator.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-vddcore
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MICVDD:
+    description:
+      Initialisation data for the MICVDD regulator, which supplies the
+      CODECs MICVDD.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-micvdd
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MIC1VDD:
+    description:
+      Initialisation data for the MIC1VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic1vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS1-supply:
+        description:
+          Regulator supplies for the MIC1VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  MIC2VDD:
+    description:
+      Initialisation data for the MIC2VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic2vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS2-supply:
+        description:
+          Regulator supplies for the MIC2VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  VDD1V8:
+    description:
+      Recommended fixed regulator for the VDD1V8 regulator, which supplies
+      the CODECs analog and 1.8V digital supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - regulator-fixed
+
+      regulator-min-microvolt:
+        const: 1800000
+
+      regulator-max-microvolt:
+        const: 1800000
+
+      vin-supply:
+        description:
+          Should be set to same supply as SYSVDD
+    required:
+      - compatible
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+      - regulator-boot-on
+      - regulator-always-on
+      - vin-supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - lochnagar-clk
+  - pinctrl
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lochnagar.h>
+    #include <dt-bindings/pinctrl/lochnagar.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        lochnagar: lochnagar@22 {
+            compatible = "cirrus,lochnagar2";
+            reg = <0x22>;
+
+            reset-gpios = <&gpio0 55 0>;
+            present-gpios = <&gpio0 60 0>;
+
+            lochnagarclk: lochnagar-clk {
+                compatible = "cirrus,lochnagar2-clk";
+
+                #clock-cells = <1>;
+                clocks = <&clkaudio>, <&clkpmic>;
+                clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+                assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
+                                  <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
+                assigned-clock-parents = <&clkaudio>, <&clkpmic>;
+            };
+
+            clkpmic: lochnagar-pmic32k {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <32768>;
+            };
+
+            pinctrl {
+                compatible = "cirrus,lochnagar-pinctrl";
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: pin-settings {
+                    ap2aif-pins {
+                        input-enable;
+                        groups = "gf-aif1";
+                        function = "codec-aif3";
+                    };
+                    codec2aif-pins {
+                        output-enable;
+                        groups = "codec-aif3";
+                        function = "gf-aif1";
+                    };
+                };
+            };
+
+            lochnagar-sc {
+                compatible = "cirrus,lochnagar2-soundcard";
+
+                #sound-dai-cells = <1>;
+
+                clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
+                clock-names = "mclk";
+            };
+
+            lochnagar-hwmon {
+                compatible = "cirrus,lochnagar2-hwmon";
+            };
+
+            MIC1VDD {
+                compatible = "cirrus,lochnagar2-mic1vdd";
+
+                cirrus,micbias-input = <3>;
+            };
+
+            MICVDD {
+                compatible = "cirrus,lochnagar2-micvdd";
+
+                SYSVDD-supply = <&wallvdd>;
+
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+            };
+
+            VDD1V8 {
+                compatible = "regulator-fixed";
+
+                regulator-name = "VDD1V8";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                regulator-boot-on;
+                regulator-always-on;
+
+                vin-supply = <&wallvdd>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
new file mode 100644
index 0000000000..68c75a517c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -0,0 +1,297 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs Multi-Functional Device
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a range
+  of analogue I/O.
+
+  See also the child driver bindings in:
+
+    bindings/pinctrl/cirrus,madera.yaml
+    bindings/regulator/wlf,arizona.yaml
+    bindings/sound/cirrus,madera.yaml
+
+allOf:
+  - $ref: /schemas/pinctrl/cirrus,madera.yaml#
+  - $ref: /schemas/regulator/wlf,arizona.yaml#
+  - $ref: /schemas/sound/cirrus,madera.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l85
+              - wlf,wm1840
+    then:
+      properties:
+        SPKVDDL-supply:
+          description:
+            Left speaker driver power supply.
+
+        SPKVDDR-supply:
+          description:
+            Right speaker driver power supply.
+
+      required:
+        - SPKVDDL-supply
+        - SPKVDDR-supply
+    else:
+      required:
+        - DCVDD-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l15
+              - cirrus,cs47l35
+    then:
+      properties:
+        SPKVDD-supply:
+          description:
+            Mono speaker driver power supply.
+
+      required:
+        - SPKVDD-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l35
+              - cirrus,cs47l85
+              - cirrus,cs47l90
+              - cirrus,cs47l91
+              - wlf,wm1840
+    then:
+      properties:
+        DBVDD2-supply:
+          description:
+            Databus power supply.
+
+      required:
+        - DBVDD2-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l85
+              - cirrus,cs47l90
+              - cirrus,cs47l91
+              - wlf,wm1840
+    then:
+      properties:
+        DBVDD3-supply:
+          description:
+            Databus power supply.
+
+        DBVDD4-supply:
+          description:
+            Databus power supply.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l15
+    then:
+      required:
+        - MICVDD-supply
+    else:
+      properties:
+        CPVDD2-supply:
+          description:
+            Secondary charge pump power supply.
+
+      required:
+        - CPVDD2-supply
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs47l15
+      - cirrus,cs47l35
+      - cirrus,cs47l85
+      - cirrus,cs47l90
+      - cirrus,cs47l91
+      - cirrus,cs42l92
+      - cirrus,cs47l92
+      - cirrus,cs47l93
+      - cirrus,wm1840
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number. The second cell is reserved for
+      future use and must be zero
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      The first cell is the IRQ number.
+      The second cell is the flags, encoded as the trigger masks from
+      bindings/interrupt-controller/interrupts.txt
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      One entry specifying the GPIO controlling /RESET.  As defined in
+      bindings/gpio.txt.  Although optional, it is strongly recommended
+      to use a hardware reset.
+    maxItems: 1
+
+  clocks:
+    description:
+      Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3.
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description: |
+      May contain up to three strings:
+        "mclk1" For the clock supplied on MCLK1, recommended to be a
+                high quality audio reference clock.
+        "mclk2" For the clock supplied on MCLK2, required to be an
+                always on 32k clock.
+        "mclk3" For the clock supplied on MCLK3.
+    oneOf:
+      - items:
+          - const: mclk1
+      - items:
+          - const: mclk2
+      - items:
+          - const: mclk3
+      - items:
+          - const: mclk1
+          - const: mclk2
+      - items:
+          - const: mclk1
+          - const: mclk3
+      - items:
+          - const: mclk2
+          - const: mclk3
+      - items:
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
+  DBVDD1-supply:
+    description:
+      Databus power supply.
+
+  CPVDD1-supply:
+    description:
+      Charge pump power supply.
+
+  DCVDD-supply:
+    description:
+      Digital power supply, optional on CS47L85, WM1840 where it can
+      be supplied internally.
+
+  MICVDD-supply:
+    description:
+      Microphone power supply, normally supplied internally except on
+      cs47l24, wm1831 where it is mandatory.
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - AVDD-supply
+  - DBVDD1-supply
+  - CPVDD1-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/madera.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        cs47l85: codec@1a {
+            compatible = "cirrus,cs47l85";
+            reg = <0x1a>;
+
+            reset-gpios = <&gpio 0>;
+            wlf,ldoena = <&gpio 1>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <4 1 0>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            AVDD-supply = <&vdd1v8>;
+            DBVDD1-supply = <&vdd1v8>;
+            DBVDD2-supply = <&vdd1v8>;
+            DBVDD3-supply = <&vdd1v8>;
+            DBVDD4-supply = <&vdd1v8>;
+            CPVDD1-supply = <&vdd1v8>;
+            CPVDD2-supply = <&vdd1v2>;
+            SPKVDDL-supply = <&vdd5v>;
+            SPKVDDR-supply = <&vdd5v>;
+
+            clocks = <&clks 0>, <&clks 1>, <&clks 2>;
+            clock-names = "mclk1", "mclk2", "mclk3";
+
+            cirrus,dmic-ref = <0 0 MADERA_DMIC_REF_MICBIAS1>;
+            cirrus,inmode = <
+                MADERA_INMODE_SE   MADERA_INMODE_SE
+                MADERA_INMODE_SE   MADERA_INMODE_SE
+                MADERA_INMODE_DIFF MADERA_INMODE_DIFF
+            >;
+            cirrus,max-channels-clocked = <2 0 0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinsettings>;
+
+            pinsettings: pin-settings {
+                aif1-pins {
+                    groups = "aif1";
+                    function = "aif1";
+                    bias-bus-hold;
+                };
+
+                aif2-pins {
+                    groups = "aif2";
+                    function = "aif2";
+                    bias-bus-hold;
+                };
+
+                aif3-pins {
+                    groups = "aif3";
+                    function = "aif3";
+                    bias-bus-hold;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
new file mode 100644
index 0000000000..07c69c0c66
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
@@ -0,0 +1,67 @@
+* Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
+			 "dlg,da9053-ab", or "dlg,da9053-bb"
+
+Optional properties:
+- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
+                    input lines are used as general purpose analogue
+					input.
+- tsiref-supply: Phandle to the regulator, which provides the reference
+                 voltage for the TSIREF pin. Must be provided when the
+			     touchscreen pins are used for ADC purposes.
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9052/53 regulators are
+  bound using their names as listed below:
+
+    buck1     : regulator BUCK CORE
+    buck2     : regulator BUCK PRO
+    buck3     : regulator BUCK MEM
+    buck4     : regulator BUCK PERI
+    ldo1      : regulator LDO1
+    ldo2      : regulator LDO2
+    ldo3      : regulator LDO3
+    ldo4      : regulator LDO4
+    ldo5      : regulator LDO5
+    ldo6      : regulator LDO6
+    ldo7      : regulator LDO7
+    ldo8      : regulator LDO8
+    ldo9      : regulator LDO9
+    ldo10     : regulator LDO10
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+i2c@63fc8000 { /* I2C1 */
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa";
+		reg = <0x48>;
+
+		regulators {
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+			};
+
+			buck3 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			buck4 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/da9055.txt b/Documentation/devicetree/bindings/mfd/da9055.txt
new file mode 100644
index 0000000000..131a53283e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9055.txt
@@ -0,0 +1,70 @@
+* Dialog DA9055 Power Management Integrated Circuit (PMIC)
+
+DA9055 consists of a large and varied group of sub-devices (I2C Only):
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+da9055-gpio		:		: GPIOs
+da9055-regulator	:		: Regulators
+da9055-onkey		:		: On key
+da9055-rtc		:		: RTC
+da9055-hwmon		:		: ADC
+da9055-watchdog		:		: Watchdog
+
+The CODEC device in DA9055 has a separate, configurable I2C address and so
+is instantiated separately from the PMIC.
+
+For details on accompanying CODEC I2C device, see the following:
+Documentation/devicetree/bindings/sound/da9055.txt
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9055-pmic"
+- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
+- interrupts: IRQ line info for da9055 chip.
+- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
+- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9055 regulators are
+  bound using their names as listed below:
+
+    buck1     : regulator BUCK1
+    buck2     : regulator BUCK2
+    ldo1      : regulator LDO1
+    ldo2      : regulator LDO2
+    ldo3      : regulator LDO3
+    ldo4      : regulator LDO4
+    ldo5      : regulator LDO5
+    ldo6      : regulator LDO6
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Example:
+
+	pmic: da9055-pmic@5a {
+		compatible = "dlg,da9055-pmic";
+		reg = <0x5a>;
+		interrupt-parent = <&intc>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <2075000>;
+			};
+			buck2: BUCK2 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+			ldo1: LDO1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
new file mode 100644
index 0000000000..e4eedd3bd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -0,0 +1,124 @@
+* Dialog DA9062 Power Management Integrated Circuit (PMIC)
+
+Product information for the DA9062 and DA9061 devices can be found here:
+- https://www.dialog-semiconductor.com/products/da9062
+- https://www.dialog-semiconductor.com/products/da9061
+
+The DA9062 PMIC consists of:
+
+Device                   Supply Names    Description
+------                   ------------    -----------
+da9062-regulator        :               : LDOs & BUCKs
+da9062-rtc              :               : Real-Time Clock
+da9062-onkey            :               : On Key
+da9062-watchdog         :               : Watchdog Timer
+da9062-thermal          :               : Thermal
+da9062-gpio             :               : GPIOs
+
+The DA9061 PMIC consists of:
+
+Device                   Supply Names    Description
+------                   ------------    -----------
+da9062-regulator        :               : LDOs & BUCKs
+da9062-onkey            :               : On Key
+da9062-watchdog         :               : Watchdog Timer
+da9062-thermal          :               : Thermal
+
+======
+
+Required properties:
+
+- compatible : Should be
+    "dlg,da9062" for DA9062
+    "dlg,da9061" for DA9061
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+  modified to match the chip's OTP settings).
+
+Optional properties:
+
+- gpio-controller : Marks the device as a gpio controller.
+- #gpio-cells     : Should be two. The first cell is the pin number and the
+                    second cell is used to specify the gpio polarity.
+
+See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
+GPIO bindings.
+
+- interrupts : IRQ line information.
+- interrupt-controller
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+further information on IRQ bindings.
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs.
+  The DA9062 regulators are bound using their names listed below:
+
+    buck1    : BUCK_1
+    buck2    : BUCK_2
+    buck3    : BUCK_3
+    buck4    : BUCK_4
+    ldo1     : LDO_1
+    ldo2     : LDO_2
+    ldo3     : LDO_3
+    ldo4     : LDO_4
+
+  The DA9061 regulators are bound using their names listed below:
+
+    buck1    : BUCK_1
+    buck2    : BUCK_2
+    buck3    : BUCK_3
+    ldo1     : LDO_1
+    ldo2     : LDO_2
+    ldo3     : LDO_3
+    ldo4     : LDO_4
+
+  The component follows the standard regulator framework and the bindings
+  details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+  regulator-initial-mode may be specified for buck regulators using mode values
+  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
+
+- rtc : This node defines settings required for the Real-Time Clock associated
+  with the DA9062. There are currently no entries in this binding, however
+  compatible = "dlg,da9062-rtc" should be added if a node is created.
+
+- onkey : See ../input/da9062-onkey.txt
+
+- watchdog: See ../watchdog/da9062-wdt.txt
+
+- thermal : See ../thermal/da9062-thermal.txt
+
+Example:
+
+	pmic0: da9062@58 {
+		compatible = "dlg,da9062";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9062-rtc";
+		};
+
+		regulators {
+			DA9062_BUCK1: buck1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp = <500000>;
+				regulator-max-microamp = <2000000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-boot-on;
+			};
+			DA9062_LDO1: ldo1 {
+				regulator-name = "LDO_1";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt
new file mode 100644
index 0000000000..f09b41fbdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -0,0 +1,60 @@
+Dialog Semiconductor DA9150 Combined Charger/Fuel-Gauge MFD bindings
+
+DA9150 consists of a group of sub-devices:
+
+Device			 Description
+------			 -----------
+da9150-gpadc		: General Purpose ADC
+da9150-charger		: Battery Charger
+da9150-fg		: Battery Fuel-Gauge
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9150"
+- reg: Specifies the I2C slave address
+- interrupts: IRQ line info for da9150 chip.
+- interrupt-controller: da9150 has internal IRQs (own IRQ domain).
+  (See ../interrupt-controller/interrupts.txt for
+   further information relating to interrupt properties)
+
+Sub-devices:
+- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt
+- da9150-charger: See ../power/da9150-charger.txt
+- da9150-fg: See ../power/da9150-fg.txt
+
+Example:
+
+	charger_fg: da9150@58 {
+		compatible = "dlg,da9150";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		gpadc: da9150-gpadc {
+			compatible = "dlg,da9150-gpadc";
+			#io-channel-cells = <1>;
+		};
+
+		charger {
+			compatible = "dlg,da9150-charger";
+
+			io-channels = <&gpadc 0>,
+				      <&gpadc 2>,
+				      <&gpadc 8>,
+				      <&gpadc 5>;
+			io-channel-names = "CHAN_IBUS",
+					   "CHAN_VBUS",
+					   "CHAN_TJUNC",
+					   "CHAN_VBAT";
+		};
+
+		fuel-gauge {
+			compatible = "dlg,da9150-fuel-gauge";
+
+			dlg,update-interval = <10000>;
+			dlg,warn-soc-level = /bits/ 8 <15>;
+			dlg,crit-soc-level = /bits/ 8 <5>
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
new file mode 100644
index 0000000000..f6967c1f62
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander and reset controller
+  for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: ../reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpo";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
new file mode 100644
index 0000000000..c5a7e10d7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+  For device-tree bindings of other sub-modules refer to the binding documents
+  under the respective sub-system directories.
+  Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special
+  handling: First, when GP_FB2 is used, it must be ensured that there is no
+  moment where all voltage monitors are disabled. Next, as da9063 only supports
+  UV *and* OV monitoring, both must be set to the same severity and value
+  (0: disable, 1: enable).
+
+properties:
+  compatible:
+    enum:
+      - dlg,da9063
+      - dlg,da9063l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  dlg,use-sw-pm:
+    type: boolean
+    description:
+      Disable the watchdog during suspend.
+      Only use this option if you can't use the watchdog automatic suspend
+      function during a suspend (see register CONTROL_B).
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-watchdog
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-rtc
+
+  onkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-onkey
+
+      dlg,disable-key-power:
+        type: boolean
+        description: |
+          Disable power-down using a long key-press.
+          If this entry does not exist then by default the key-press triggered
+          power down is enabled and the OnKey will support both KEY_POWER and
+          KEY_SLEEP.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9063";
+        reg = <0x58>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+
+        rtc {
+          compatible = "dlg,da9063-rtc";
+        };
+
+        watchdog {
+          compatible = "dlg,da9063-watchdog";
+        };
+
+        onkey {
+          compatible = "dlg,da9063-onkey";
+          dlg,disable-key-power;
+        };
+
+        regulators {
+          bcore1 {
+            regulator-name = "BCORE1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1570000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <2000000>;
+            regulator-boot-on;
+          };
+          ldo6 {
+            /* UNUSED */
+            regulator-name = "LDO_6";
+            regulator-uv-protection-microvolt = <0>;
+            regulator-ov-protection-microvolt = <0>;
+          };
+          ldo11 {
+            regulator-name = "LDO_11";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <900000>;
+            regulator-uv-protection-microvolt = <1>;
+            regulator-ov-protection-microvolt = <1>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 0000000000..9b11b6e2bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller
+
+description: |
+  This binding describes the ENE KB3930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dell,wyse-ariel-ec  # Dell Wyse Ariel board (3020)
+      - const: ene,kb3930
+  reg:
+    maxItems: 1
+
+  off-gpios:
+    description: GPIO used with the shutdown protocol on Ariel
+    maxItems: 2
+
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+        reg = <0x58>;
+        system-power-controller;
+
+        off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+                    <&gpio 127 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
new file mode 100644
index 0000000000..02c111def5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB930 Embedded Controller
+
+description: |
+  This binding describes the ENE KB930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+
+$ref: /schemas/power/supply/power-supply.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - acer,a500-iconia-ec # Acer A500 Iconia tablet device
+      - const: ene,kb930
+  reg:
+    maxItems: 1
+
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    battery: battery-cell {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <3260000>;
+      energy-full-design-microwatt-hours = <24000000>;
+      operating-range-celsius = <0 40>;
+    };
+
+    mains: ac-adapter {
+      compatible = "gpio-charger";
+      charger-type = "mains";
+      gpios = <&gpio 125 0>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "acer,a500-iconia-ec", "ene,kb930";
+        reg = <0x58>;
+
+        system-power-controller;
+
+        monitored-battery = <&battery>;
+        power-supplies = <&mains>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
new file mode 100644
index 0000000000..20067002cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Control and Status Registers Module
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  As a system controller, the Freescale i.MX8qm/qxp Control and Status
+  Registers(CSR) module represents a set of miscellaneous registers of a
+  specific subsystem.  It may provide control and/or status report interfaces
+  to a mix of standalone hardware devices within that subsystem.  One typical
+  use-case is for some other nodes to acquire a reference to the syscon node
+  by phandle, and the other typical use-case is that the operating system
+  should consider all subnodes of the CSR module as separate child devices.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-mipi-lvds-csr
+          - fsl,imx8qm-lvds-csr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+patternProperties:
+  "^(ldb|phy|pxl2dpi)$":
+    type: object
+    description: The possible child devices of the CSR module.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-lvds-csr
+    then:
+      required:
+        - pxl2dpi
+        - ldb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-lvds-csr
+    then:
+      required:
+        - phy
+        - ldb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mipi_lvds_0_csr: syscon@56221000 {
+        compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+        reg = <0x56221000 0x1000>;
+        clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "ipg";
+
+        mipi_lvds_0_pxl2dpi: pxl2dpi {
+            compatible = "fsl,imx8qxp-pxl2dpi";
+            fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+
+                port@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+            };
+        };
+
+        mipi_lvds_0_ldb: ldb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "fsl,imx8qxp-ldb";
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                     <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+            clock-names = "pixel", "bypass";
+            power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+            channel@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+
+            channel@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+        };
+    };
+
+    mipi_lvds_0_phy: phy@56228300 {
+        compatible = "fsl,imx8qxp-mipi-dphy";
+        reg = <0x56228300 0x100>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        clock-names = "phy_ref";
+        #phy-cells = <0>;
+        fsl,syscon = <&mipi_lvds_0_csr>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
new file mode 100644
index 0000000000..b035052869
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl-imx25-tsadc.txt
@@ -0,0 +1,47 @@
+Freescale MX25 ADC/TSC MultiFunction Device (MFD)
+
+This device combines two general purpose conversion queues one used for general
+ADC and the other used for touchscreens.
+
+Required properties:
+ - compatible:			Should be "fsl,imx25-tsadc".
+ - reg:				Start address and size of the memory area of
+ 					the device
+ - interrupts:			Interrupt for this device
+					(See: ../interrupt-controller/interrupts.txt)
+ - clocks:			An 'ipg' clock (See: ../clock/clock-bindings.txt)
+ - interrupt-controller:	This device is an interrupt controller. It
+   					controls the interrupts of both
+					conversion queues.
+ - #interrupt-cells:		Should be '<1>'.
+ - #address-cells:		Should be '<1>'.
+ - #size-cells:			Should be '<1>'.
+
+This device includes two conversion queues which can be added as subnodes.
+The first queue is for the touchscreen, the second for general purpose ADC.
+
+Example:
+	tscadc: tscadc@50030000 {
+		compatible = "fsl,imx25-tsadc";
+		reg = <0x50030000 0xc>;
+		interrupts = <46>;
+		clocks = <&clks 119>;
+		clock-names = "ipg";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		tsc: tcq@50030400 {
+			compatible = "fsl,imx25-tcq";
+			reg = <0x50030400 0x60>;
+			...
+		};
+
+		adc: gcq@50030800 {
+			compatible = "fsl,imx25-gcq";
+			reg = <0x50030800 0x60>;
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
new file mode 100644
index 0000000000..dc379f3ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller
+
+description: |
+  The Gateworks System Controller (GSC) is a device present across various
+  Gateworks product families that provides a set of system related features
+  such as the following (refer to the board hardware user manuals to see what
+  features are present)
+   - Watchdog Timer
+   - GPIO
+   - Pushbutton controller
+   - Hardware monitor with ADC's for temperature and voltage rails and
+     fan controller
+
+maintainers:
+  - Tim Harvey <tharvey@gateworks.com>
+
+properties:
+  $nodename:
+    pattern: "gsc@[0-9a-f]{1,2}"
+  compatible:
+    const: gw,gsc
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  adc:
+    type: object
+    additionalProperties: false
+    description: Optional hardware monitoring module
+
+    properties:
+      compatible:
+        const: gw,gsc-adc
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        additionalProperties: false
+        description: |
+          Properties for a single ADC which can report cooked values
+          (i.e. temperature sensor based on thermister), raw values
+          (i.e. voltage rail with a pre-scaling resistor divider).
+
+        properties:
+          reg:
+            description: Register of the ADC
+            maxItems: 1
+
+          label:
+            description: Name of the ADC input
+
+          gw,mode:
+            description: |
+              conversion mode:
+                0 - temperature, in C*10
+                1 - pre-scaled 24-bit voltage value
+                2 - scaled voltage based on an optional resistor divider
+                    and optional offset
+                3 - pre-scaled 16-bit voltage value
+                4 - fan tach input to report RPM's
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4]
+
+          gw,voltage-divider-ohms:
+            description: Values of resistors for divider on raw ADC input
+            maxItems: 2
+            items:
+              minimum: 1000
+              maximum: 1000000
+
+          gw,voltage-offset-microvolt:
+            description: |
+              A positive voltage offset to apply to a raw ADC
+              (i.e. to compensate for a diode drop).
+            minimum: 0
+            maximum: 1000000
+
+        required:
+          - gw,mode
+          - reg
+          - label
+
+    required:
+      - compatible
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^fan-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description: Optional fan controller
+
+    properties:
+      compatible:
+        const: gw,gsc-fan
+
+      reg:
+        description: The fan controller base address
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gsc@20 {
+            compatible = "gw,gsc";
+            reg = <0x20>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc {
+                compatible = "gw,gsc-adc";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                channel@0 { /* A0: Board Temperature */
+                    reg = <0x00>;
+                    label = "temp";
+                    gw,mode = <0>;
+                };
+
+                channel@2 { /* A1: Input Voltage (raw ADC) */
+                    reg = <0x02>;
+                    label = "vdd_vin";
+                    gw,mode = <1>;
+                    gw,voltage-divider-ohms = <22100 1000>;
+                    gw,voltage-offset-microvolt = <800000>;
+                };
+
+                channel@b { /* A2: Battery voltage */
+                    reg = <0x0b>;
+                    label = "vdd_bat";
+                    gw,mode = <1>;
+                };
+            };
+
+            fan-controller@2c {
+                compatible = "gw,gsc-fan";
+                reg = <0x2c>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
new file mode 100644
index 0000000000..e1ca4f297c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -0,0 +1,322 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS Embedded Controller
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Guenter Roeck <groeck@chromium.org>
+
+description:
+  Google's ChromeOS EC is a microcontroller which talks to the AP and
+  implements various functions such as keyboard and battery charging.
+  The EC can be connected through various interfaces (I2C, SPI, and others)
+  and the compatible string specifies which interface is being used.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          For implementations of the EC connected through I2C.
+        const: google,cros-ec-i2c
+      - description:
+          For implementations of the EC connected through SPI.
+        const: google,cros-ec-spi
+      - description:
+          For implementations of the FPMCU connected through SPI.
+        items:
+          - const: google,cros-ec-fp
+          - const: google,cros-ec-spi
+      - description:
+          For implementations of the EC connected through RPMSG.
+        const: google,cros-ec-rpmsg
+      - description:
+          For implementations of the EC connected through UART.
+        const: google,cros-ec-uart
+
+  controller-data: true
+
+  google,cros-ec-spi-pre-delay:
+    description:
+      This property specifies the delay in usecs between the
+      assertion of the CS and the first clock pulse.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,cros-ec-spi-msg-delay:
+    description:
+      This property specifies the delay in usecs between messages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,has-vbc-nvram:
+    description:
+      Some implementations of the EC include a small nvram space used to
+      store verified boot context data. This boolean flag is used to specify
+      whether this nvram is present or not.
+    type: boolean
+
+  mediatek,rpmsg-name:
+    description:
+      Must be defined if the cros-ec is a rpmsg device for a Mediatek
+      ARM Cortex M4 Co-processor. Contains the name of the rpmsg
+      device. Used to match the subnode to the rpmsg device announced by
+      the SCP.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  spi-max-frequency: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  boot0-gpios:
+    maxItems: 1
+    description: Assert for bootloader mode.
+
+  vdd-supply: true
+
+  wakeup-source:
+    description: Button can wake-up the system.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  typec:
+    $ref: /schemas/chrome/google,cros-ec-typec.yaml#
+
+  ec-pwm:
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
+    deprecated: true
+
+  pwm:
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
+
+  kbd-led-backlight:
+    $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml#
+
+  keyboard-controller:
+    $ref: /schemas/input/google,cros-ec-keyb.yaml#
+
+  proximity:
+    $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
+
+  codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 2
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      "^ec-codec@[a-f0-9]+$":
+        type: object
+        $ref: /schemas/sound/google,cros-ec-codec.yaml#
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  cbas:
+    type: object
+
+    description:
+      This device is used to signal when a detachable base is attached
+      to a Chrome OS tablet. This device cannot be detected at runtime.
+
+    properties:
+      compatible:
+        const: google,cros-cbas
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^i2c-tunnel[0-9]*$":
+    type: object
+    $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+
+  "^regulator@[0-9]+$":
+    type: object
+    $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
+
+  "^extcon[0-9]*$":
+    type: object
+    $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-spi
+    then:
+      properties:
+        controller-data: false
+        google,cros-ec-spi-pre-delay: false
+        google,cros-ec-spi-msg-delay: false
+        spi-max-frequency: false
+    else:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-rpmsg
+    then:
+      properties:
+        mediatek,rpmsg-name: false
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - google,cros-ec-rpmsg
+                - google,cros-ec-uart
+    then:
+      required:
+        - reg
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,cros-ec-fp
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+        typec: false
+        ec-pwm: false
+        kbd-led-backlight: false
+        keyboard-controller: false
+        proximity: false
+        codecs: false
+        cbas: false
+
+      patternProperties:
+        "^i2c-tunnel[0-9]*$": false
+        "^regulator@[0-9]+$": false
+        "^extcon[0-9]*$": false
+
+      # Using additionalProperties: false here and
+      # listing true properties doesn't work
+
+      required:
+        - reset-gpios
+        - boot0-gpios
+        - vdd-supply
+    else:
+      properties:
+        reset-gpios: false
+        boot0-gpios: false
+        vdd-supply: false
+
+additionalProperties: false
+
+examples:
+  # Example for I2C
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@1e {
+            compatible = "google,cros-ec-i2c";
+            reg = <0x1e>;
+            interrupts = <6 0>;
+            interrupt-parent = <&gpio0>;
+        };
+    };
+
+  # Example for SPI
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0x0>;
+            google,cros-ec-spi-msg-delay = <30>;
+            google,cros-ec-spi-pre-delay = <10>;
+            interrupts = <99 0>;
+            interrupt-parent = <&gpio7>;
+            spi-max-frequency = <5000000>;
+
+            proximity {
+                compatible = "google,cros-ec-mkbp-proximity";
+            };
+
+            cbas {
+                compatible = "google,cros-cbas";
+            };
+        };
+    };
+
+  # Example for RPMSG
+  - |
+    scp0 {
+        cros-ec {
+            compatible = "google,cros-ec-rpmsg";
+        };
+    };
+
+  # Example for FPMCU
+  - |
+    spi {
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      ec@0 {
+        compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+        reg = <0x0>;
+        interrupt-parent = <&gpio_controller>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <3000000>;
+        reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+        boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&pp3300_fp_mcu>;
+      };
+    };
+
+  # Example for UART
+  - |
+    serial {
+        cros-ec {
+            compatible = "google,cros-ec-uart";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt
new file mode 100644
index 0000000000..22da96d344
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
@@ -0,0 +1,40 @@
+* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
+
+Required parent device properties:
+- compatible    : One of the following chip-specific strings:
+	"hisilicon,hi6421-pmic";
+	"hisilicon,hi6421v530-pmic";
+- reg		: register range space of hi6421;
+
+Supported Hi6421 sub-devices include:
+
+Device                     IRQ Names              Supply Names   Description
+------                     ---------              ------------   -----------
+regulators               :  None                 : None         : Regulators
+
+Required child device properties:
+None.
+
+Example:
+	hi6421 {
+		compatible = "hisilicon,hi6421-pmic";
+		reg = <0xfcc00000 0x0180>; /* 0x60 << 2 */
+
+		regulators {
+			// supply for MLC NAND/ eMMC
+			hi6421_vout0_reg: hi6421_vout0 {
+				regulator-name = "VOUT0";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			// supply for 26M Oscillator
+			hi6421_vout1_reg: hi6421_vout1 {
+				regulator-name = "VOUT1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 0000000000..bdff5b6534
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+  (SPMI) bus. It provides interrupts and power supply.
+
+  The GPIO and interrupt settings are represented as part of the top-level PMIC
+  node.
+
+  The SPMI controller part is provided by
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,hi6421v600-spmi
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^ldo[0-9]+$':
+        type: object
+
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+
+    pmic: pmic@0 {
+      compatible = "hisilicon,hi6421v600-spmi";
+      reg = <0 0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      interrupt-parent = <&gpio28>;
+      interrupts = <0 0>;
+
+      regulators {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ldo3: ldo3 {
+          regulator-name = "ldo3";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2000000>;
+          regulator-boot-on;
+        };
+
+        ldo4: ldo4 {
+          regulator-name = "ldo4";
+          regulator-min-microvolt = <1725000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-boot-on;
+        };
+
+        ldo9: ldo9 {
+          regulator-name = "ldo9";
+          regulator-min-microvolt = <1750000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo15: ldo15 {
+          regulator-name = "ldo15";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-always-on;
+        };
+
+        ldo16: ldo16 {
+          regulator-name = "ldo16";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-boot-on;
+        };
+
+        ldo17: ldo17 {
+          regulator-name = "ldo17";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+
+        ldo33: ldo33 {
+          regulator-name = "ldo33";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo34: ldo34 {
+          regulator-name = "ldo34";
+          regulator-min-microvolt = <2600000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
new file mode 100644
index 0000000000..9630ac0e4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -0,0 +1,33 @@
+Hisilicon Hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+
++----------------+             +-------------+
+|                |             |             |
+|    Hi6220      |   SSI bus   |   Hi655x    |
+|                |-------------|             |
+|                |(REGMAP_MMIO)|             |
++----------------+             +-------------+
+
+Required properties:
+- compatible:           Should be "hisilicon,hi655x-pmic".
+- reg:                  Base address of PMIC on Hi6220 SoC.
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios:           The GPIO used by PMIC IRQ.
+- #clock-cells:		From common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
+
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <0>;
+	}
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
new file mode 100644
index 0000000000..044cd7542c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/iqs62x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
+  integrate multiple sensing technologies in a single package.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a
+      - azoteq,iqs621
+      - azoteq,iqs622
+      - azoteq,iqs624
+      - azoteq,iqs625
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Specifies the name of the calibration and configuration file selected by
+      the driver. If this property is omitted, the name is chosen based on the
+      device name with ".bin" as the extension (e.g. iqs620a.bin for IQS620A).
+
+  keys:
+    $ref: ../input/iqs62x-keys.yaml
+
+  pwm:
+    $ref: ../pwm/iqs620a-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    /*
+     * Dual capacitive buttons with proximity-activated function, unipolar lid
+     * switch and panel-mounted LED.
+     */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <KEY_SELECT>,
+                                             <KEY_MENU>,
+                                             <KEY_OK>,
+                                             <KEY_MENU>;
+
+                            hall-switch-south {
+                                    linux,code = <SW_LID>;
+                                    azoteq,use-prox;
+                            };
+                    };
+
+                    iqs620a_pwm: pwm {
+                            compatible = "azoteq,iqs620a-pwm";
+                            #pwm-cells = <2>;
+                    };
+            };
+    };
+
+    pwmleds {
+            compatible = "pwm-leds";
+
+            led-1 {
+                    pwms = <&iqs620a_pwm 0 1000000>;
+                    max-brightness = <255>;
+            };
+    };
+
+  - |
+    /* Single inductive button with bipolar dock/tablet-mode switch. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs620a@44 {
+                    compatible = "azoteq,iqs620a";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    firmware-name = "iqs620a_coil.bin";
+
+                    keys {
+                            compatible = "azoteq,iqs620a-keys";
+
+                            linux,keycodes = <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_MUTE>;
+
+                            hall-switch-north {
+                                    linux,code = <SW_DOCK>;
+                            };
+
+                            hall-switch-south {
+                                    linux,code = <SW_TABLET_MODE>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    /* Dual capacitive buttons with volume knob. */
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs624@44 {
+                    compatible = "azoteq,iqs624";
+                    reg = <0x44>;
+                    interrupt-parent = <&gpio>;
+                    interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+                    keys {
+                            compatible = "azoteq,iqs624-keys";
+
+                            linux,keycodes = <BTN_0>,
+                                             <0>,
+                                             <BTN_1>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <0>,
+                                             <KEY_VOLUMEUP>,
+                                             <KEY_VOLUMEDOWN>;
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
new file mode 100644
index 0000000000..084960fd5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Khadas on-board Microcontroller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Khadas embeds a microcontroller on their VIM and Edge boards adding some
+  system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory
+  storage, IR/Key resume control, system power LED control and more.
+
+properties:
+  compatible:
+    enum:
+      - khadas,mcu # MCU revision is discoverable
+
+  "#cooling-cells": # Only needed for boards having FAN control feature
+    const: 2
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      khadas_mcu: system-controller@18 {
+        compatible = "khadas,mcu";
+        reg = <0x18>;
+        #cooling-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 0000000000..eb3b43547c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  The board management controller may contain different IP blocks like
+  watchdog, fan monitoring, PWM controller, interrupt controller and a
+  GPIO controller.
+
+properties:
+  compatible:
+    const: kontron,sl28cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+  "^hwmon(@[0-9a-f]+)?$":
+    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+  "^interrupt-controller(@[0-9a-f]+)?$":
+    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+  "^pwm(@[0-9a-f]+)?$":
+    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+  "^watchdog(@[0-9a-f]+)?$":
+    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sl28cpld@4a {
+            compatible = "kontron,sl28cpld";
+            reg = <0x4a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            watchdog@4 {
+                compatible = "kontron,sl28cpld-wdt";
+                reg = <0x4>;
+                kontron,assert-wdt-timeout-pin;
+            };
+
+            hwmon@b {
+                compatible = "kontron,sl28cpld-fan";
+                reg = <0xb>;
+            };
+
+            pwm@c {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xc>;
+                #pwm-cells = <2>;
+            };
+
+            pwm@e {
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xe>;
+                #pwm-cells = <2>;
+            };
+
+            gpio@10 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x10>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-line-names = "a", "b", "c";
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@15 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x15>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@1a {
+                compatible = "kontron,sl28cpld-gpo";
+                reg = <0x1a>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@1b {
+                compatible = "kontron,sl28cpld-gpi";
+                reg = <0x1b>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            interrupt-controller@1c {
+                compatible = "kontron,sl28cpld-intc";
+                reg = <0x1c>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt
new file mode 100644
index 0000000000..e8591d6b11
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp3943.txt
@@ -0,0 +1,33 @@
+TI/National Semiconductor LP3943 MFD driver
+
+Required properties:
+  - compatible: "ti,lp3943"
+  - reg: I2C slave address. From 0x60 to 0x67.
+
+LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
+
+For the LP3943 GPIO properties please refer to:
+Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+
+For the LP3943 PWM properties please refer to:
+Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
+
+Example:
+
+lp3943@60 {
+	compatible = "ti,lp3943";
+	reg = <0x60>;
+
+	gpioex: gpio {
+		compatible = "ti,lp3943-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pwm3943: pwm {
+		compatible = "ti,lp3943-pwm";
+		#pwm-cells = <2>;
+		ti,pwm0 = <8 9 10>;
+		ti,pwm1 = <15>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000000..ae9cf39bd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,67 @@
+TI LP873X PMIC MFD driver
+
+Required properties:
+  - compatible:	"ti,lp8732", "ti,lp8733"
+  - reg:		I2C slave address.
+  - gpio-controller:	Marks the device node as a GPIO Controller.
+  - #gpio-cells:	Should be two.  The first cell is the pin number and
+			the second cell is used to specify flags.
+			See ../gpio/gpio.txt for more information.
+  - xxx-in-supply:	Phandle to parent supply node of each regulator
+			populated under regulators node. xxx can be
+			buck0, buck1, ldo0 or ldo1.
+  - regulators:	List of child nodes that specify the regulator
+			initialization data.
+Example:
+
+pmic: lp8733@60 {
+	compatible = "ti,lp8733";
+	reg = <0x60>;
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	buck0-in-supply = <&vsys_3v3>;
+	buck1-in-supply = <&vsys_3v3>;
+	ldo0-in-supply = <&vsys_3v3>;
+	ldo1-in-supply = <&vsys_3v3>;
+
+	regulators {
+		lp8733_buck0: buck0 {
+			regulator-name = "lp8733-buck0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lp8733_buck1: buck1 {
+			regulator-name = "lp8733-buck1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo0: ldo0 {
+			regulator-name = "lp8733-ldo0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo1: ldo1 {
+			regulator-name = "lp8733-ldo1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
new file mode 100644
index 0000000000..5a642a51d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -0,0 +1,162 @@
+MAX77620 Power management IC from Maxim Semiconductor.
+
+Required properties:
+-------------------
+- compatible: Must be one of
+		"maxim,max77620"
+		"maxim,max20024"
+		"maxim,max77663"
+- reg: I2C device address.
+
+Optional properties:
+-------------------
+- interrupts:		The interrupt on the parent the controller is
+			connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells:	is <2> and their usage is compliant to the 2 cells
+			variant of <../interrupt-controller/interrupts.txt>
+			IRQ numbers for different interrupt source of MAX77620
+			are defined at dt-bindings/mfd/max77620.h.
+
+- system-power-controller: Indicates that this PMIC is controlling the
+			   system power, see [1] for more details.
+
+[1] Documentation/devicetree/bindings/power/power-controller.txt
+
+Optional subnodes and their properties:
+=======================================
+
+Flexible power sequence configurations:
+--------------------------------------
+The Flexible Power Sequencer (FPS) allows each regulator to power up under
+hardware or software control. Additionally, each regulator can power on
+independently or among a group of other regulators with an adjustable power-up
+and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed
+to be part of a sequence allowing external regulators to be sequenced along
+with internal regulators. 32KHz clock can be programmed to be part of a
+sequence.
+
+The flexible sequencing structure consists of two hardware enable inputs
+(EN0, EN1), and 3 master sequencing timers called FPS0, FPS1 and FPS2.
+Each master sequencing timer is programmable through its configuration
+register to have a hardware enable source (EN1 or EN2) or a software enable
+source (SW). When enabled/disabled, the master sequencing timer generates
+eight sequencing events on different time periods called slots. The time
+period between each event is programmable within the configuration register.
+Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power
+sequence slave register which allows its enable source to be specified as
+a flexible power sequencer timer or a software bit. When a FPS source of
+regulators, GPIOs and clocks specifies the enable source to be a flexible
+power sequencer, the power up and power down delays can be specified in
+the regulators, GPIOs and clocks flexible power sequencer configuration
+registers.
+
+When FPS event cleared (set to LOW), regulators, GPIOs and 32KHz
+clock are set into following state at the sequencing event that
+corresponds to its flexible sequencer configuration register.
+	Sleep state: 			In this state, regulators, GPIOs
+					and 32KHz clock get disabled at
+					the sequencing event.
+	Global Low Power Mode (GLPM):	In this state, regulators are set in
+					low power mode at the sequencing event.
+
+The configuration parameters of FPS is provided through sub-node "fps"
+and their child for FPS specific. The child node name for FPS are "fps0",
+"fps1", and "fps2" for FPS0, FPS1 and FPS2 respectively.
+
+The FPS configurations like FPS source, power up and power down slots for
+regulators, GPIOs and 32kHz clocks are provided in their respective
+configuration nodes which is explained in respective sub-system DT
+binding document.
+
+There is need for different FPS configuration parameters based on system
+state like when system state changed from active to suspend or active to
+power off (shutdown).
+
+Optional properties:
+-------------------
+-maxim,fps-event-source:		u32, FPS event source like external
+					hardware input to PMIC i.e. EN0, EN1 or
+					software (SW).
+					The macros are defined on
+						dt-bindings/mfd/max77620.h
+					for different control source.
+					- MAX77620_FPS_EVENT_SRC_EN0
+						for hardware input pin EN0.
+					- MAX77620_FPS_EVENT_SRC_EN1
+						for hardware input pin EN1.
+					- MAX77620_FPS_EVENT_SRC_SW
+						for software control.
+
+-maxim,shutdown-fps-time-period-us:	u32, FPS time period in microseconds
+					when system enters in to shutdown
+					state.
+
+-maxim,suspend-fps-time-period-us:	u32, FPS time period in microseconds
+					when system enters in to suspend state.
+
+-maxim,device-state-on-disabled-event:	u32, describe the PMIC state when FPS
+					event cleared (set to LOW) whether it
+					should go to sleep state or low-power
+					state. Following are valid values:
+					- MAX77620_FPS_INACTIVE_STATE_SLEEP
+						to set the PMIC state to sleep.
+					- MAX77620_FPS_INACTIVE_STATE_LOW_POWER
+						to set the PMIC state to low
+						power.
+					Absence of this property or other value
+					will not change device state when FPS
+					event get cleared.
+
+Here supported time periods by device in microseconds are as follows:
+MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
+MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+
+-maxim,power-ok-control: configure map power ok bit
+			1: Enables POK(Power OK) to control nRST_IO and GPIO1
+			POK function.
+			0: Disables POK control.
+			if property missing, do not configure MPOK bit.
+			If POK mapping is enabled for GPIO1/nRST_IO then,
+			GPIO1/nRST_IO pins are HIGH only if all rails
+			that have POK control enabled are HIGH.
+			If any of the rails goes down(which are enabled for POK
+			control) then, GPIO1/nRST_IO goes LOW.
+			this property is valid for max20024 only.
+
+For DT binding details of different sub modules like GPIO, pincontrol,
+regulator, power, please refer respective device-tree binding document
+under their respective sub-system directories.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+
+max77620@3c {
+	compatible = "maxim,max77620";
+	reg = <0x3c>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <0 86 IRQ_TYPE_NONE>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	fps {
+		fps0 {
+			maxim,shutdown-fps-time-period-us = <1280>;
+			maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+		};
+
+		fps1 {
+			maxim,shutdown-fps-time-period-us = <1280>;
+			maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+		};
+
+		fps2 {
+			maxim,shutdown-fps-time-period-us = <1280>;
+			maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_SW>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
new file mode 100644
index 0000000000..4181174fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/max77650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  MAX77650 is an ultra-low power PMIC providing battery charging and power
+  supply for low-power IoT and wearable applications.
+
+  The GPIO-controller module is represented as part of the top-level PMIC
+  node. The device exposes a single GPIO line.
+
+  For device-tree bindings of other sub-modules (regulator, power supply,
+  LEDs and onkey) refer to the binding documents under the respective
+  sub-system directories.
+
+properties:
+  compatible:
+    const: maxim,max77650
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the pin number and the second cell is used to specify
+      the gpio active state.
+
+  gpio-line-names:
+    maxItems: 1
+    description:
+      Single string containing the name of the GPIO line.
+
+  regulators:
+    $ref: ../regulator/max77650-regulator.yaml
+
+  charger:
+    $ref: ../power/supply/max77650-charger.yaml
+
+  leds:
+    $ref: ../leds/leds-max77650.yaml
+
+  onkey:
+    $ref: ../input/max77650-onkey.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@48 {
+            compatible = "maxim,max77650";
+            reg = <0x48>;
+
+            interrupt-controller;
+            interrupt-parent = <&gpio2>;
+            #interrupt-cells = <2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "max77650-charger";
+
+            regulators {
+                compatible = "maxim,max77650-regulator";
+
+                max77650_ldo: regulator-ldo {
+                    regulator-name = "max77650-ldo";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <2937500>;
+                };
+
+                max77650_sbb0: regulator-sbb0 {
+                    regulator-name = "max77650-sbb0";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1587500>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77650-charger";
+                input-voltage-min-microvolt = <4200000>;
+                input-current-limit-microamp = <285000>;
+            };
+
+            leds {
+                compatible = "maxim,max77650-led";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    label = "blue:usr0";
+                };
+
+                led@1 {
+                    reg = <1>;
+                    label = "red:usr1";
+                    linux,default-trigger = "heartbeat";
+                };
+
+                led@2 {
+                    reg = <2>;
+                    label = "green:usr2";
+                };
+            };
+
+            onkey {
+                compatible = "maxim,max77650-onkey";
+                linux,code = <KEY_END>;
+                maxim,onkey-slide;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/max8925.txt b/Documentation/devicetree/bindings/mfd/max8925.txt
new file mode 100644
index 0000000000..4f0dc6638e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max8925.txt
@@ -0,0 +1,64 @@
+* Maxim max8925 Power Management IC
+
+Required parent device properties:
+- compatible : "maxim,max8925"
+- reg : the I2C slave address for the max8925 chip
+- interrupts : IRQ line for the max8925 chip
+- interrupt-controller: describes the max8925 as an interrupt
+  controller (has its own domain)
+- #interrupt-cells : should be 1.
+	- The cell is the max8925 local IRQ number
+
+Optional parent device properties:
+- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in
+  interrupts property, the other is indicated here.
+
+max8925 consists of a large and varied group of sub-devices:
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+max8925-onkey		:		: On key
+max8925-rtc		:		: RTC
+max8925-regulator	:		: Regulators
+max8925-backlight	:		: Backlight
+max8925-touch		:		: Touchscreen
+max8925-power		:		: Charger
+
+Example:
+
+	pmic: max8925@3c {
+		compatible = "maxim,max8925";
+		reg = <0x3c>;
+		interrupts = <1>;
+		interrupt-parent = <&intcmux4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		maxim,tsc-irq = <0>;
+
+		regulators {
+			SDV1 {
+				regulator-min-microvolt = <637500>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+		};
+		backlight {
+			maxim,max8925-dual-string = <0>;
+		};
+		charger {
+			batt-detect = <0>;
+			topoff-threshold = <1>;
+			fast-charge = <7>;
+			no-temp-support = <0>;
+			no-insert-detect = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
new file mode 100644
index 0000000000..4ed52184d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -0,0 +1,125 @@
+* Maxim MAX8998, National/TI LP3974 multi-function device
+
+The Maxim MAX8998 is a multi-function device which includes voltage/current
+regulators, real time clock, battery charging controller and several
+other sub-blocks. It is interfaced using an I2C interface. Each sub-block
+is addressed by the host system using different i2c slave address.
+
+PMIC sub-block
+--------------
+
+The PMIC sub-block contains a number of voltage and current regulators,
+with controllable parameters and dynamic voltage scaling capability.
+In addition, it includes a real time clock and battery charging controller
+as well. It is accessible at I2C address 0x66.
+
+Required properties:
+- compatible: Should be one of the following:
+    - "maxim,max8998" for Maxim MAX8998
+    - "national,lp3974" or "ti,lp3974" for National/TI LP3974.
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+- interrupts: Interrupt specifiers for two interrupt sources.
+  - First interrupt specifier is for main interrupt.
+  - Second interrupt specifier is for power-on/-off interrupt.
+- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used
+  for buck 1 dvs. The format of the gpio specifier depends on the gpio
+  controller.
+- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
+  for buck 2 dvs. The format of the gpio specifier depends on the gpio
+  controller.
+- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from
+  the possible 4 options selectable by the dvs gpios. The value of this
+  property should be 0, 1, 2 or 3. If not specified or out of range,
+  a default value of 0 is taken.
+- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
+  the possible 2 options selectable by the dvs gpios. The value of this
+  property should be 0 or 1. If not specified or out of range, a default
+  value of 0 is taken.
+- max8998,pmic-buck-voltage-lock: If present, disallows changing of
+  preprogrammed buck dvfs voltages.
+
+Additional properties required if max8998,pmic-buck1-dvs-gpios is defined:
+- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts
+  for buck1 regulator that can be selected using dvs gpio.
+
+Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
+- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
+  for buck2 regulator that can be selected using dvs gpio.
+
+Regulators: All the regulators of MAX8998 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+	regulator-name {
+		/* standard regulator bindings here */
+	};
+
+Following regulators of the MAX8998 PMIC block are supported. Note that
+the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK
+number as described in MAX8998 datasheet.
+
+	- LDOn
+		  - valid values for n are 2 to 17
+		  - Example: LDO2, LDO10, LDO17
+	- BUCKn
+		  - valid values for n are 1 to 4.
+		  - Example: BUCK1, BUCK2, BUCK3, BUCK4
+
+	- ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+		   voltage type regulator
+
+	- ESAFEOUT1: (ldo19)
+	- ESAFEOUT2: (ld020)
+
+	- CHARGER: main battery charger current control
+
+Standard regulator bindings are used inside regulator subnodes. Check
+  Documentation/devicetree/bindings/regulator/regulator.txt
+for more details.
+
+Example:
+
+	pmic@66 {
+		compatible = "maxim,max8998-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <4 0>, <3 0>;
+
+		/* Buck 1 DVS settings */
+		max8998,pmic-buck1-default-dvs-idx = <0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+					       <&gpx0 1 1 0 0>; /* SET2 */
+		max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1000000>, <950000>;
+
+		/* Buck 2 DVS settings */
+		max8998,pmic-buck2-default-dvs-idx = <0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
+		max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
+
+		/* Regulators to instantiate */
+		regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_ARM_1.2V";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <90000>;
+				regulator-max-microamp = <800000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 0000000000..995e96ee74
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <45000>;
+                    regulator-max-microamp = <475000>;
+                    regulator-boot-on;
+                };
+
+                LDO1 {
+                    regulator-name = "MOT_2.7V";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                    regulator-name = "UNUSED_LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
new file mode 100644
index 0000000000..da67742c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator for MAX5970 Smart Switch from Maxim Integrated
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  The smart switch provides no output regulation, but independent fault protection
+  and voltage and current sensing.
+  Programming is done through I2C bus.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5970
+      - maxim,max5978
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  leds:
+    type: object
+    description:
+      Properties for four LEDS.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-3]$":
+        $ref: /schemas/leds/common.yaml#
+        type: object
+
+    additionalProperties: false
+
+  vss1-supply:
+    description: Supply of the first channel.
+
+  vss2-supply:
+    description: Supply of the second channel.
+
+  regulators:
+    type: object
+    description:
+      Properties for both hot swap control/switch.
+
+    patternProperties:
+      "^sw[0-1]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        properties:
+          shunt-resistor-micro-ohms:
+            description: |
+              The value of current sense resistor in microohms.
+
+        required:
+          - shunt-resistor-micro-ohms
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - vss1-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - maxim,max5970
+    then:
+      required:
+        - vss2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@3a {
+            compatible = "maxim,max5978";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+
+            regulators {
+                sw0_ref_0: sw0 {
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                led@0 {
+                    reg = <0>;
+                    label = "led0";
+                    default-state = "on";
+                };
+                led@1 {
+                    reg = <1>;
+                    label = "led1";
+                    default-state = "on";
+                };
+            };
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3a {
+            compatible = "maxim,max5970";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+            vss2-supply = <&p5v>;
+
+            regulators {
+                sw0_ref_1: sw0 {
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+                sw1_ref_1: sw1 {
+                    shunt-resistor-micro-ohms = <10000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
new file mode 100644
index 0000000000..d027aabe45
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 is a Power Management IC which includes voltage and
+  current regulators, RTC and clock outputs.
+
+  The MAX77686 provides three 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77686.h.
+
+properties:
+  compatible:
+    const: maxim,max77686
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  voltage-regulators:
+    $ref: ../regulator/maxim,max77686.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        max77686: pmic@9 {
+            compatible = "maxim,max77686";
+            reg = <0x09>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&max77686_irq>;
+            pinctrl-names = "default";
+            wakeup-source;
+            #clock-cells = <1>;
+
+            voltage-regulators {
+                LDO1 {
+                    regulator-name = "VALIVE_1.0V_AP";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VM1M2_1.2V_AP";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                    regulator-always-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                LDO22 {
+                    regulator-name = "VMEM_VDD_2.8V";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK9 {
+                    regulator-name = "CAM_ISP_CORE_1.2V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1200000>;
+                    maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
new file mode 100644
index 0000000000..6a6f222b86
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, LED/flash, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77693
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max77693.yaml
+
+  led:
+    $ref: /schemas/leds/maxim,max77693.yaml
+
+  max77693-muic:
+    type: object
+    additionalProperties: false
+    deprecated: true
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+    required:
+      - compatible
+
+  muic:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+      connector:
+        $ref: /schemas/connector/usb-connector.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: ../regulator/maxim,max77693.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77693";
+            reg = <0x66>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                ESAFEOUT1 {
+                    regulator-name = "ESAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "ESAFEOUT2";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <60000>;
+                    regulator-max-microamp = <2580000>;
+                };
+            };
+
+            muic {
+                compatible = "maxim,max77693-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+
+                            muic_to_usb: endpoint {
+                                remote-endpoint = <&usb_to_muic>;
+                            };
+                        };
+
+                        port@3 {
+                            reg = <3>;
+
+                            muic_to_mhl: endpoint {
+                                remote-endpoint = <&mhl_to_muic>;
+                            };
+                        };
+                    };
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77693-haptic";
+                haptic-supply = <&ldo26_reg>;
+                pwms = <&pwm 0 38022 0>;
+            };
+
+            charger {
+                compatible = "maxim,max77693-charger";
+
+                maxim,constant-microvolt = <4350000>;
+                maxim,min-system-microvolt = <3600000>;
+                maxim,thermal-regulation-celsius = <100>;
+                maxim,battery-overcurrent-microamp = <3500000>;
+                maxim,charge-input-threshold-microvolt = <4300000>;
+            };
+
+            led {
+                compatible = "maxim,max77693-led";
+                maxim,boost-mode = <LEDS_BOOST_FIXED>;
+                maxim,boost-mvout = <5000>;
+                maxim,mvsys-min = <2400>;
+
+                flash-led {
+                    label = "max77693-flash";
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-sources = <0>, <1>;
+                    led-max-microamp = <500000>;
+                    flash-max-microamp = <1250000>;
+                    flash-max-timeout-us = <1000000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
new file mode 100644
index 0000000000..edac14af10
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  MAX77714 is a Power Management IC with 4 buck regulators, 9
+  low-dropout regulators, 8 GPIOs, RTC and watchdog.
+
+properties:
+  compatible:
+    const: maxim,max77714
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(buck[0-3]|ldo[0-8])$':
+        type: object
+        unevaluatedProperties: false
+        $ref: /schemas/regulator/regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@1c {
+            compatible = "maxim,max77714";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
new file mode 100644
index 0000000000..ad2013900b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77802 is a Power Management IC which includes voltage and
+  current regulators (10 high efficiency Buck regulators and 32 Low-DropOut
+  (LDO)), RTC and clock outputs.
+
+  The MAX77802 provides two 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77802.h.
+
+properties:
+  compatible:
+    const: maxim,max77802
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77802.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  inb1-supply:
+    description: Power supply for buck1
+  inb2-supply:
+    description: Power supply for buck2
+  inb3-supply:
+    description: Power supply for buck3
+  inb4-supply:
+    description: Power supply for buck4
+  inb5-supply:
+    description: Power supply for buck5
+  inb6-supply:
+    description: Power supply for buck6
+  inb7-supply:
+    description: Power supply for buck7
+  inb8-supply:
+    description: Power supply for buck8
+  inb9-supply:
+    description: Power supply for buck9
+  inb10-supply:
+    description: Power supply for buck10
+
+  inl1-supply:
+    description: Power supply for LDO8, LDO15
+  inl2-supply:
+    description: Power supply for LDO17, LDO27, LDO30, LDO35
+  inl3-supply:
+    description: Power supply for LDO3, LDO5, LDO7, LDO7
+  inl4-supply:
+    description: Power supply for LDO10, LDO11, LDO13, LDO14
+  inl5-supply:
+    description: Power supply for LDO9, LDO19
+  inl6-supply:
+    description: Power supply for LDO4, LDO21, LDO24, LDO33
+  inl7-supply:
+    description: Power supply for LDO18, LDO20, LDO28, LDO29
+  inl9-supply:
+    description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34
+  inl10-supply:
+    description: Power supply for LDO1, LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/maxim,max77802.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@9 {
+            compatible = "maxim,max77802";
+            interrupt-parent = <&gpx3>;
+            interrupts = <1 IRQ_TYPE_NONE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+                        <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+            wakeup-source;
+            reg = <0x9>;
+            #clock-cells = <1>;
+
+            inb1-supply = <&tps65090_dcdc2>;
+            inb2-supply = <&tps65090_dcdc1>;
+            inb3-supply = <&tps65090_dcdc2>;
+            inb4-supply = <&tps65090_dcdc2>;
+            inb5-supply = <&tps65090_dcdc1>;
+            inb6-supply = <&tps65090_dcdc2>;
+            inb7-supply = <&tps65090_dcdc1>;
+            inb8-supply = <&tps65090_dcdc1>;
+            inb9-supply = <&tps65090_dcdc1>;
+            inb10-supply = <&tps65090_dcdc1>;
+
+            inl1-supply = <&buck5_reg>;
+            inl2-supply = <&buck7_reg>;
+            inl3-supply = <&buck9_reg>;
+            inl4-supply = <&buck9_reg>;
+            inl5-supply = <&buck9_reg>;
+            inl6-supply = <&tps65090_dcdc2>;
+            inl7-supply = <&buck9_reg>;
+            inl9-supply = <&tps65090_dcdc2>;
+            inl10-supply = <&buck7_reg>;
+
+            regulators {
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK10 {
+                    regulator-name = "vdd_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-initial-mode = <MAX77802_OPMODE_NORMAL>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <MAX77802_OPMODE_LP>;
+                    };
+                };
+
+                // ...
+
+                LDO35 {
+                    regulator-name = "ldo_35";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
new file mode 100644
index 0000000000..2e2a2a86b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, fuel-gauge, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77843
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  extcon:
+    $ref: /schemas/extcon/maxim,max77843.yaml
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: maxim,max77843-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77843.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77843";
+            interrupt-parent = <&gpa1>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+            reg = <0x66>;
+
+            extcon {
+                compatible = "maxim,max77843-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            /*
+                             * TODO: The DTS this is based on does not have
+                             * port@0 which is a required property. The ports
+                             * look incomplete and need fixing.
+                             * Add a disabled port just to satisfy dtschema.
+                             */
+                            reg = <0>;
+                            status = "disabled";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            endpoint {
+                                remote-endpoint = <&mhl_to_musb_con>;
+                            };
+                        };
+                    };
+                };
+
+                ports {
+                    port {
+                        endpoint {
+                            remote-endpoint = <&usb_to_muic>;
+                        };
+                    };
+                };
+            };
+
+            regulators {
+                compatible = "maxim,max77843-regulator";
+
+                SAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                SAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <100000>;
+                    regulator-max-microamp = <3150000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77843-haptic";
+                haptic-supply = <&ldo38_reg>;
+                pwms = <&pwm 0 33670 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
new file mode 100644
index 0000000000..8261ea7327
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -0,0 +1,156 @@
+* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
+
+Optional properties:
+- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
+- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
+- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
+- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
+
+Sub-nodes:
+- codec: Contain the Audio Codec node.
+  - adc-port: Contain PMIC SSI port number used for ADC.
+  - dac-port: Contain PMIC SSI port number used for DAC.
+- leds : Contain the led nodes and initial register values in property
+  "led-control". Number of register depends of used IC, for MC13783 is 6,
+  for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
+  these registers.
+  - #address-cells: Must be 1.
+  - #size-cells: Must be 0.
+  Each led node should contain "reg", which used as LED ID (described below).
+  Optional properties "label" and "linux,default-trigger" is described in
+  Documentation/devicetree/bindings/leds/common.txt.
+- regulators : Contain the regulator nodes. The regulators are bound using
+  their names as listed below with their registers and bits for enabling.
+
+MC13783 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red 1
+    4  : Green 1
+    5  : Blue 1
+    6  : Red 2
+    7  : Green 2
+    8  : Blue 2
+    9  : Red 3
+    10 : Green 3
+    11 : Blue 3
+
+MC13892 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red
+    4  : Green
+    5  : Blue
+
+MC34708 LED IDs:
+    0  : Charger Red
+    1  : Charger Green
+
+MC13783 regulators:
+    sw1a      : regulator SW1A      (register 24, bit 0)
+    sw1b      : regulator SW1B      (register 25, bit 0)
+    sw2a      : regulator SW2A      (register 26, bit 0)
+    sw2b      : regulator SW2B      (register 27, bit 0)
+    sw3       : regulator SW3       (register 29, bit 20)
+    vaudio    : regulator VAUDIO    (register 32, bit 0)
+    viohi     : regulator VIOHI     (register 32, bit 3)
+    violo     : regulator VIOLO     (register 32, bit 6)
+    vdig      : regulator VDIG      (register 32, bit 9)
+    vgen      : regulator VGEN      (register 32, bit 12)
+    vrfdig    : regulator VRFDIG    (register 32, bit 15)
+    vrfref    : regulator VRFREF    (register 32, bit 18)
+    vrfcp     : regulator VRFCP     (register 32, bit 21)
+    vsim      : regulator VSIM      (register 33, bit 0)
+    vesim     : regulator VESIM     (register 33, bit 3)
+    vcam      : regulator VCAM      (register 33, bit 6)
+    vrfbg     : regulator VRFBG     (register 33, bit 9)
+    vvib      : regulator VVIB      (register 33, bit 11)
+    vrf1      : regulator VRF1      (register 33, bit 12)
+    vrf2      : regulator VRF2      (register 33, bit 15)
+    vmmc1     : regulator VMMC1     (register 33, bit 18)
+    vmmc2     : regulator VMMC2     (register 33, bit 21)
+    gpo1      : regulator GPO1      (register 34, bit 6)
+    gpo2      : regulator GPO2      (register 34, bit 8)
+    gpo3      : regulator GPO3      (register 34, bit 10)
+    gpo4      : regulator GPO4      (register 34, bit 12)
+    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
+    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
+
+MC13892 regulators:
+    vcoincell : regulator VCOINCELL (register 13, bit 23)
+    sw1       : regulator SW1	    (register 24, bit 0)
+    sw2       : regulator SW2	    (register 25, bit 0)
+    sw3       : regulator SW3	    (register 26, bit 0)
+    sw4       : regulator SW4	    (register 27, bit 0)
+    swbst     : regulator SWBST	    (register 29, bit 20)
+    vgen1     : regulator VGEN1	    (register 32, bit 0)
+    viohi     : regulator VIOHI	    (register 32, bit 3)
+    vdig      : regulator VDIG	    (register 32, bit 9)
+    vgen2     : regulator VGEN2	    (register 32, bit 12)
+    vpll      : regulator VPLL	    (register 32, bit 15)
+    vusb2     : regulator VUSB2	    (register 32, bit 18)
+    vgen3     : regulator VGEN3	    (register 33, bit 0)
+    vcam      : regulator VCAM	    (register 33, bit 6)
+    vvideo    : regulator VVIDEO    (register 33, bit 12)
+    vaudio    : regulator VAUDIO    (register 33, bit 15)
+    vsd       : regulator VSD	    (register 33, bit 18)
+    gpo1      : regulator GPO1	    (register 34, bit 6)
+    gpo2      : regulator GPO2	    (register 34, bit 8)
+    gpo3      : regulator GPO3	    (register 34, bit 10)
+    gpo4      : regulator GPO4	    (register 34, bit 12)
+    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
+    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
+    vusb      : regulator VUSB	    (register 50, bit 3)
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+ecspi@70010000 { /* ECSPI1 */
+	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+		   <&gpio4 25 0>; /* GPIO4_25 */
+
+	pmic: mc13892@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x000 0x000 0x0e0 0x000>;
+
+			sysled@3 {
+				reg = <3>;
+				label = "system:red:live";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+
+		regulators {
+			sw1_reg: mc13892__sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: mc13892__sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
new file mode 100644
index 0000000000..fc2a53148e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 PMIC
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+  MT6357 is a power management system chip containing 5 buck
+  converters and 29 LDOs. Supported features are audio codec,
+  USB battery charging, fuel gauge, RTC
+
+  This is a multifunction device with the following sub modules:
+  - Regulator
+  - RTC
+  - Keys
+
+  It is interfaced to host controller using SPI interface by a proprietary hardware
+  called PMIC wrapper or pwrap. This MFD is a child device of pwrap.
+  See the following for pwrap node definitions:
+  Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+
+properties:
+  compatible:
+    const: mediatek,mt6357
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
+    description:
+      List of MT6357 BUCKs and LDOs regulators.
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    description:
+      MT6357 Real Time Clock.
+    properties:
+      compatible:
+        const: mediatek,mt6357-rtc
+      start-year: true
+    required:
+      - compatible
+
+  keys:
+    type: object
+    $ref: /schemas/input/mediatek,pmic-keys.yaml
+    description:
+      MT6357 power and home keys.
+
+required:
+  - compatible
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pwrap {
+        pmic {
+            compatible = "mediatek,mt6357";
+
+            interrupt-parent = <&pio>;
+            interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            regulators {
+                mt6357_vproc_reg: buck-vproc {
+                    regulator-name = "vproc";
+                    regulator-min-microvolt = <518750>;
+                    regulator-max-microvolt = <1312500>;
+                    regulator-ramp-delay = <6250>;
+                    regulator-enable-ramp-delay = <220>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                mt6357_vusb33_reg: ldo-vusb33 {
+                    regulator-name = "vusb33";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3100000>;
+                    regulator-enable-ramp-delay = <264>;
+                };
+            };
+
+            rtc {
+                compatible = "mediatek,mt6357-rtc";
+            };
+
+            keys {
+                compatible = "mediatek,mt6357-keys";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
new file mode 100644
index 0000000000..fb65abf30d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  MT6360 is a PMIC device with the following sub modules.
+  It is interfaced to host controller using I2C interface.
+
+  This document describes the binding for PMIC device and its sub module.
+
+properties:
+  compatible:
+    const: mediatek,mt6360
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: IRQB
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The first cell is the IRQ number.
+
+  regulators:
+    $ref: /schemas/regulator/mt6360-regulator.yaml#
+
+  charger:
+    $ref: /schemas/power/supply/mt6360_charger.yaml#
+
+  tcpc:
+    $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml#
+
+  led-controller:
+    $ref: /schemas/leds/leds-mt6360.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@34 {
+            compatible = "mediatek,mt6360";
+            reg = <0x34>;
+            wakeup-source;
+            interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "IRQB";
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            mt6360_charger: charger {
+                compatible = "mediatek,mt6360-chg";
+                richtek,vinovp-microvolt = <14500000>;
+
+                otg_vbus_regulator: usb-otg-vbus-regulator {
+                    regulator-name = "usb-otg-vbus";
+                    regulator-min-microvolt = <4425000>;
+                    regulator-max-microvolt = <5825000>;
+                };
+            };
+
+            led-controller {
+                compatible = "mediatek,mt6360-led";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                multi-led@0 {
+                    reg = <0>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_RGB>;
+                    led-max-microamp = <24000>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_RED>;
+                    };
+                    led@1 {
+                        reg = <1>;
+                        color = <LED_COLOR_ID_GREEN>;
+                    };
+                    led@2 {
+                        reg = <2>;
+                        color = <LED_COLOR_ID_BLUE>;
+                    };
+                };
+                led@3 {
+                    reg = <3>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-max-microamp = <150000>;
+                };
+                led@4 {
+                    reg = <4>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <1>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+                led@5 {
+                    reg = <5>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <2>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+            };
+
+            regulators {
+                compatible = "mediatek,mt6360-regulator";
+                LDO_VIN3-supply = <&BUCK2>;
+                buck1 {
+                    regulator-name = "mt6360,buck1";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                BUCK2: buck2 {
+                    regulator-name = "mt6360,buck2";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                ldo6 {
+                    regulator-name = "mt6360,ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo7 {
+                    regulator-name = "mt6360,ldo7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo1 {
+                    regulator-name = "mt6360,ldo1";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo2 {
+                    regulator-name = "mt6360,ldo2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo3 {
+                    regulator-name = "mt6360,ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo5 {
+                    regulator-name = "mt6360,ldo5";
+                    regulator-min-microvolt = <2700000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+            };
+
+            tcpc {
+                compatible = "mediatek,mt6360-tcpc";
+                interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "PD_IRQB";
+
+                connector {
+                    compatible = "usb-c-connector";
+                    label = "USB-C";
+                    data-role = "dual";
+                    power-role = "dual";
+                    try-power-role = "sink";
+                    source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    op-sink-microwatt = <10000000>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            endpoint {
+                                remote-endpoint = <&usb_hs>;
+                            };
+                        };
+                        port@1 {
+                            reg = <1>;
+                            endpoint {
+                                remote-endpoint = <&usb_ss>;
+                          };
+                        };
+                        port@2 {
+                            reg = <2>;
+                            endpoint {
+                                remote-endpoint = <&dp_aux>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
new file mode 100644
index 0000000000..c9574b2430
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 SubPMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MT6370 is a highly-integrated smart power management IC, which includes a
+  single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
+  Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
+  driver, a backlight WLED driver, a display bias driver and a general LDO for
+  portable devices.
+
+properties:
+  compatible:
+    const: mediatek,mt6370
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  adc:
+    type: object
+    additionalProperties: false
+    description: |
+      Provides 9 channels for system monitoring, including VBUSDIV5 (lower
+      accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
+      measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
+
+    properties:
+      compatible:
+        const: mediatek,mt6370-adc
+
+      "#io-channel-cells":
+        const: 1
+
+    required:
+      - compatible
+      - "#io-channel-cells"
+
+  backlight:
+    type: object
+    $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml#
+
+  tcpc:
+    type: object
+    $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml#
+
+  indicator:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-indicator.yaml#
+
+  flashlight:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml#
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List all supported regulators, which support the control for DisplayBias
+      voltages and one general purpose LDO which commonly used to drive the
+      vibrator.
+
+    patternProperties:
+      "^(dsvbst|vibldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^(dsvpos|dsvneg)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - regulators
+  - adc
+  - backlight
+  - indicator
+  - tcpc
+  - charger
+  - flashlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@34 {
+        compatible = "mediatek,mt6370";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        mt6370_adc: adc {
+          compatible = "mediatek,mt6370-adc";
+          #io-channel-cells = <1>;
+        };
+
+        backlight {
+          compatible = "mediatek,mt6370-backlight";
+          mediatek,bled-channel-use = /bits/ 8 <15>;
+        };
+
+        charger {
+          compatible = "mediatek,mt6370-charger";
+          interrupts = <68>, <48>, <6>;
+          interrupt-names = "uvp_d_evt", "attach_i", "mivr";
+          io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
+
+          mt6370_otg_vbus: usb-otg-vbus-regulator {
+            regulator-name = "mt6370-usb-otg-vbus";
+            regulator-min-microvolt = <4350000>;
+            regulator-max-microvolt = <5800000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
+          };
+        };
+
+        indicator {
+          compatible = "mediatek,mt6370-indicator";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          multi-led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RGB>;
+            led-max-microamp = <24000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led@0 {
+              reg = <0>;
+              color = <LED_COLOR_ID_RED>;
+            };
+            led@1 {
+              reg = <1>;
+              color = <LED_COLOR_ID_GREEN>;
+            };
+            led@2 {
+              reg = <2>;
+              color = <LED_COLOR_ID_BLUE>;
+            };
+          };
+          led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <6000>;
+          };
+        };
+
+        flashlight {
+          compatible = "mediatek,mt6370-flashlight";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          led@0 {
+            reg = <0>;
+            led-sources = <0>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+          led@1 {
+            reg = <1>;
+            led-sources = <1>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+        };
+
+        tcpc {
+          compatible = "mediatek,mt6370-tcpc";
+          interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>;
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            vbus-supply = <&mt6370_otg_vbus>;
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+
+        regulators {
+          dsvbst {
+            regulator-name = "mt6370-dsv-vbst";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6200000>;
+          };
+          dsvpos {
+            regulator-name = "mt6370-dsv-vpos";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          dsvneg {
+            regulator-name = "mt6370-dsv-vneg";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          vibldo {
+            regulator-name = "mt6370-vib-ldo";
+            regulator-min-microvolt = <1600000>;
+            regulator-max-microvolt = <4000000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
new file mode 100644
index 0000000000..c8c4812fff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Control Processor System
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+
+description:
+  MediaTek System Control Processor System (SCPSYS) has several
+  power management tasks. The tasks include MTCMOS power
+  domain control, thermal measurement, DVFS, etc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8167-scpsys
+          - mediatek,mt8173-scpsys
+          - mediatek,mt8183-scpsys
+          - mediatek,mt8186-scpsys
+          - mediatek,mt8192-scpsys
+          - mediatek,mt8195-scpsys
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  power-controller:
+    $ref: /schemas/power/mediatek,power-controller.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    syscon@10006000 {
+      compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+      reg = <0x10006000 0x100>;
+
+      spm: power-controller {
+        compatible = "mediatek,mt8195-power-controller";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #power-domain-cells = <1>;
+
+        /* sample of power domain nodes */
+        power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+
+        power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
new file mode 100644
index 0000000000..336c0495c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -0,0 +1,51 @@
+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+  Integrated Circuit) that is manufactured in a lower technology node (rough
+  silicon) that handles analog drivers for things like audio amplifiers, LED
+  drivers, level shifters, PHY (physical interfaces to things like USB or
+  ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+  known as a system controller "syscon" or any other memory range containing a
+  mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+  consider all subnodes of the MFD device as separate devices akin to how
+  "simple-bus" indicates when to see subnodes as children for a simple
+  memory-mapped bus. For more complex devices, when the nexus driver has to
+  probe registers to figure out what child devices exist etc, this should not
+  be used. In the latter case the child devices will be determined by the
+  operating system.
+
+- ranges: Describes the address mapping relationship to the parent. Should set
+  the child's base address to 0, the physical address within parent's address
+  space, and the length of the address map.
+
+- #address-cells: Specifies the number of cells used to represent physical base
+  addresses. Must be present if ranges is used.
+
+- #size-cells: Specifies the number of cells used to represent the size of an
+  address. Must be present if ranges is used.
+
+Example:
+
+foo@1000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x01000 0x1000>;
+
+	led@8.0 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x01>;
+		label = "myled";
+		default-state = "on";
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
new file mode 100644
index 0000000000..190230216d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -0,0 +1,72 @@
+Motorola CPCAP PMIC device tree binding
+
+Required properties:
+- compatible		: One or both of "motorola,cpcap" or "ste,6556002"
+- reg			: SPI chip select
+- interrupts		: The interrupt line the device is connected to
+- interrupt-controller	: Marks the device node as an interrupt controller
+- #interrupt-cells	: The number of cells to describe an IRQ, should be 2
+- #address-cells	: Child device offset number of cells, should be 1
+- #size-cells		: Child device size number of cells, should be 0
+- spi-max-frequency	: Typically set to 3000000
+- spi-cs-high		: SPI chip select direction
+
+Optional subnodes:
+
+The sub-functions of CPCAP get their own node with their own compatible values,
+which are described in the following files:
+
+- Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
+- Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
+- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
+- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+- Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
+
+The only exception is the audio codec. Instead of a compatible value its
+node must be named "audio-codec".
+
+Required properties for the audio-codec subnode:
+
+- #sound-dai-cells = <1>;
+
+The audio-codec provides two DAIs. The first one is connected to the
+Stereo HiFi DAC and the second one is connected to the Voice DAC.
+
+Example:
+
+&mcspi1 {
+	cpcap: pmic@0 {
+		compatible = "motorola,cpcap", "ste,6556002";
+		reg = <0>;	/* cs0 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <3000000>;
+		spi-cs-high;
+
+		audio-codec {
+			#sound-dai-cells = <1>;
+
+			/* HiFi */
+			port@0 {
+				endpoint {
+					remote-endpoint = <&cpu_dai1>;
+				};
+			};
+
+			/* Voice */
+			port@1 {
+				endpoint {
+					remote-endpoint = <&cpu_dai2>;
+				};
+			};
+		};
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
new file mode 100644
index 0000000000..5ba849d78d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MP2629 Battery Charger PMIC from Monolithic Power System.
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+description: |
+  MP2629 is a PMIC providing battery charging and power supply for smartphones,
+  wireless camera and portable devices. Chip is controlled over I2C.
+
+  The battery charge management device handles battery charger controller and
+  ADC IIO device for battery, system voltage
+
+properties:
+  compatible:
+    enum:
+      - mps,mp2629
+      - mps,mp2733
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@4b {
+            compatible = "mps,mp2629";
+            reg = <0x4b>;
+
+            interrupt-controller;
+            interrupt-parent = <&gpio2>;
+            #interrupt-cells = <2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
new file mode 100644
index 0000000000..8bd1abfc44
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ocelot Externally-Controlled Ethernet Switch
+
+maintainers:
+  - Colin Foster <colin.foster@in-advantage.com>
+
+description: |
+  The Ocelot ethernet switch family contains chips that have an internal CPU
+  (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
+  the option to be controlled externally via external interfaces like SPI or
+  PCIe.
+
+  The switch family is a multi-port networking switch that supports many
+  interfaces. Additionally, the device can perform pin control, MDIO buses, and
+  external GPIO expanders.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7512
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  spi-max-frequency:
+    maxItems: 1
+
+patternProperties:
+  "^pinctrl@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml
+
+  "^gpio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-sgpio
+
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/net/mscc,miim.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-miim
+
+  "^ethernet-switch@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/net/mscc,vsc7514-switch.yaml
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - mscc,vsc7512-switch
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ocelot_clock: ocelot-clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <125000000>;
+      };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        soc@0 {
+            compatible = "mscc,vsc7512";
+            spi-max-frequency = <2500000>;
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            mdio@7107009c {
+                compatible = "mscc,ocelot-miim";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x7107009c 0x24>;
+
+                sw_phy0: ethernet-phy@0 {
+                    reg = <0x0>;
+                };
+            };
+
+            mdio@710700c0 {
+                compatible = "mscc,ocelot-miim";
+                pinctrl-names = "default";
+                pinctrl-0 = <&miim1_pins>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x710700c0 0x24>;
+
+                sw_phy4: ethernet-phy@4 {
+                    reg = <0x4>;
+                };
+            };
+
+            gpio: pinctrl@71070034 {
+                compatible = "mscc,ocelot-pinctrl";
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&gpio 0 0 22>;
+                reg = <0x71070034 0x6c>;
+
+                sgpio_pins: sgpio-pins {
+                    pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+                    function = "sg0";
+                };
+
+                miim1_pins: miim1-pins {
+                    pins = "GPIO_14", "GPIO_15";
+                    function = "miim";
+                };
+            };
+
+            gpio@710700f8 {
+                compatible = "mscc,ocelot-sgpio";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                bus-frequency = <12500000>;
+                clocks = <&ocelot_clock>;
+                microchip,sgpio-port-ranges = <0 15>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&sgpio_pins>;
+                reg = <0x710700f8 0x100>;
+
+                sgpio_in0: gpio@0 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <0>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+
+                sgpio_out1: gpio@1 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <1>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+            };
+        };
+    };
+
+...
+
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
new file mode 100644
index 0000000000..10540aa7af
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -0,0 +1,110 @@
+MediaTek MT6397/MT6323 Multifunction Device Driver
+
+MT6397/MT6323 is a multifunction device with the following sub modules:
+- Regulator
+- RTC
+- Audio codec
+- GPIO
+- Clock
+- LED
+- Keys
+- Power controller
+
+It is interfaced to host controller using SPI interface by a proprietary hardware
+called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
+See the following for pwarp node definitions:
+../soc/mediatek/mediatek,pwrap.yaml
+
+This document describes the binding for MFD device and its sub module.
+
+Required properties:
+compatible:
+	"mediatek,mt6323" for PMIC MT6323
+	"mediatek,mt6331" for PMIC MT6331 and MT6332
+	"mediatek,mt6357" for PMIC MT6357
+	"mediatek,mt6358" for PMIC MT6358
+	"mediatek,mt6359" for PMIC MT6359
+	"mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366
+	"mediatek,mt6397" for PMIC MT6397
+
+Optional subnodes:
+
+- rtc
+	Required properties: Should be one of follows
+		- compatible: "mediatek,mt6323-rtc"
+		- compatible: "mediatek,mt6331-rtc"
+		- compatible: "mediatek,mt6358-rtc"
+		- compatible: "mediatek,mt6397-rtc"
+	For details, see ../rtc/rtc-mt6397.txt
+- regulators
+	Required properties:
+		- compatible: "mediatek,mt6323-regulator"
+	see ../regulator/mt6323-regulator.txt
+		- compatible: "mediatek,mt6358-regulator"
+		- compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator"
+	see ../regulator/mt6358-regulator.txt
+		- compatible: "mediatek,mt6397-regulator"
+	see ../regulator/mt6397-regulator.txt
+- codec
+	Required properties:
+		- compatible: "mediatek,mt6397-codec" or "mediatek,mt6358-sound"
+- clk
+	Required properties:
+		- compatible: "mediatek,mt6397-clk"
+- led
+	Required properties:
+		- compatible: "mediatek,mt6323-led"
+	see ../leds/leds-mt6323.txt
+
+- keys
+	Required properties: Should be one of the following
+		- compatible: "mediatek,mt6323-keys"
+		- compatible: "mediatek,mt6331-keys"
+		- compatible: "mediatek,mt6397-keys"
+	see ../input/mtk-pmic-keys.txt
+
+- power-controller
+	Required properties:
+		- compatible: "mediatek,mt6323-pwrc"
+	For details, see ../power/reset/mt6323-poweroff.txt
+
+- pin-controller
+	Required properties:
+		- compatible: "mediatek,mt6397-pinctrl"
+	For details, see ../pinctrl/pinctrl-mt65xx.txt
+
+Example:
+	pwrap: pwrap@1000f000 {
+		compatible = "mediatek,mt8135-pwrap";
+
+		...
+
+		pmic {
+			compatible = "mediatek,mt6397";
+
+			codec: mt6397codec {
+				compatible = "mediatek,mt6397-codec";
+			};
+
+			regulators {
+				compatible = "mediatek,mt6397-regulator";
+
+				mt6397_vpca15_reg: buck_vpca15 {
+					regulator-compatible = "buck_vpca15";
+					regulator-name = "vpca15";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-ramp-delay = <12500>;
+					regulator-always-on;
+				};
+
+				mt6397_vgp4_reg: ldo_vgp4 {
+					regulator-compatible = "ldo_vgp4";
+					regulator-name = "vgp4";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-enable-ramp-delay = <218>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
new file mode 100644
index 0000000000..755cbef064
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt
@@ -0,0 +1,45 @@
+* Freescale MXS LRADC device driver
+
+Required properties:
+- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
+              for i.MX28 SoC
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the LRADC interrupts
+
+Optional properties:
+- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
+                               to LRADC. Valid value is either 4 or 5. If this
+                               property is not present, then the touchscreen is
+                               disabled. 5 wires is valid for i.MX28 SoC only.
+- fsl,ave-ctrl: number of samples per direction to calculate an average value.
+                Allowed value is 1 ... 32, default is 4
+- fsl,ave-delay: delay between consecutive samples. Allowed value is
+                 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
+                 2 kHz and its default is 2 (= 1 ms)
+- fsl,settling: delay between plate switch to next sample. Allowed value is
+                1 ... 2047. It counts at 2 kHz and its default is
+                10 (= 5 ms)
+
+Example for i.MX23 SoC:
+
+	lradc@80050000 {
+		compatible = "fsl,imx23-lradc";
+		reg = <0x80050000 0x2000>;
+		interrupts = <36 37 38 39 40 41 42 43 44>;
+		fsl,lradc-touchscreen-wires = <4>;
+		fsl,ave-ctrl = <4>;
+		fsl,ave-delay = <2>;
+		fsl,settling = <10>;
+	};
+
+Example for i.MX28 SoC:
+
+	lradc@80050000 {
+		compatible = "fsl,imx28-lradc";
+		reg = <0x80050000 0x2000>;
+		interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
+		fsl,lradc-touchscreen-wires = <5>;
+		fsl,ave-ctrl = <4>;
+		fsl,ave-delay = <2>;
+		fsl,settling = <10>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
new file mode 100644
index 0000000000..59a630025f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Netronix Embedded Controller
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+description: |
+  This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and
+  is typically implemented as a TI MSP430 microcontroller.
+
+properties:
+  compatible:
+    const: netronix,ntxec
+
+  reg:
+    items:
+      - description: The I2C address of the EC
+
+  system-power-controller:
+    type: boolean
+    description: See Documentation/devicetree/bindings/power/power-controller.txt
+
+  interrupts:
+    minItems: 1
+    description:
+      The EC can signal interrupts via a GPIO line
+
+  "#pwm-cells":
+    const: 2
+    description: |
+      Number of cells in a PWM specifier.
+
+      The following PWM channels are supported:
+        - 0: The PWM channel controlled by registers 0xa1-0xa7
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ec: embedded-controller@43 {
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_ntxec>;
+
+                    compatible = "netronix,ntxec";
+                    reg = <0x43>;
+                    system-power-controller;
+                    interrupt-parent = <&gpio4>;
+                    interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                    #pwm-cells = <2>;
+            };
+    };
+
+    backlight {
+            compatible = "pwm-backlight";
+            pwms = <&ec 0 50000>;
+            power-supply = <&backlight_regulator>;
+    };
+
+    backlight_regulator: regulator-dummy {
+            compatible = "regulator-fixed";
+            regulator-name = "backlight";
+    };
diff --git a/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml b/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml
new file mode 100644
index 0000000000..b1ade64a15
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/nxp,bbnsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Battery-Backed Non-Secure Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  NXP BBNSM serves as non-volatile logic and storage for the system.
+  it Intergrates RTC & ON/OFF control.
+  The RTC can retain its state and continues counting even when the
+  main chip is power down. A time alarm is generated once the most
+  significant 32 bits of the real-time counter match the value in the
+  Time Alarm register.
+  The ON/OFF logic inside the BBNSM allows for connecting directly to
+  a PMIC or other voltage regulator device. both smart PMIC mode and
+  Dumb PMIC mode supported.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nxp,imx93-bbnsm
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx93-bbnsm-rtc
+
+      interrupts:
+        maxItems: 1
+
+      start-year: true
+
+    required:
+      - compatible
+      - interrupts
+
+    additionalProperties: false
+
+  pwrkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx93-bbnsm-pwrkey
+
+      interrupts:
+        maxItems: 1
+
+      linux,code: true
+
+    required:
+      - compatible
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - rtc
+  - pwrkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/linux-event-codes.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bbnsm: bbnsm@44440000 {
+        compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+        reg = <0x44440000 0x10000>;
+
+        bbnsm_rtc: rtc {
+            compatible = "nxp,imx93-bbnsm-rtc";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        bbnsm_pwrkey: pwrkey {
+            compatible = "nxp,imx93-bbnsm-pwrkey";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            linux,code = <KEY_POWER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
new file mode 100644
index 0000000000..a0d8c30c26
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -0,0 +1,103 @@
+OMAP HS USB Host
+
+Required properties:
+
+- compatible: should be "ti,usbhs-host"
+- reg: should contain one register range i.e. start and length
+- ti,hwmods: must contain "usb_host_hs"
+
+Optional properties:
+
+- num-ports: number of USB ports. Usually this is automatically detected
+  from the IP's revision register but can be overridden by specifying
+  this property. A maximum of 3 ports are supported at the moment.
+
+- portN-mode: String specifying the port mode for port N, where N can be
+  from 1 to 3. If the port mode is not specified, that port is treated
+  as unused. When specified, it must be one of the following.
+	"ehci-phy",
+        "ehci-tll",
+        "ehci-hsic",
+        "ohci-phy-6pin-datse0",
+        "ohci-phy-6pin-dpdm",
+        "ohci-phy-3pin-datse0",
+        "ohci-phy-4pin-dpdm",
+        "ohci-tll-6pin-datse0",
+        "ohci-tll-6pin-dpdm",
+        "ohci-tll-3pin-datse0",
+        "ohci-tll-4pin-dpdm",
+        "ohci-tll-2pin-datse0",
+        "ohci-tll-2pin-dpdm",
+
+- single-ulpi-bypass: Must be present if the controller contains a single
+  ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+
+- clock-names: should include:
+  For OMAP3
+  * "usbhost_120m_fck" - 120MHz Functional clock.
+
+  For OMAP4+
+  * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
+  * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
+  * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
+  * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
+  * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
+  * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
+  * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
+  * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
+  * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
+
+Required properties if child node exists:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: must be present
+
+Properties for children:
+
+The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
+See Documentation/devicetree/bindings/usb/generic-ehci.yaml and
+Documentation/devicetree/bindings/usb/generic-ohci.yaml.
+
+Example for OMAP4:
+
+usbhshost: usbhshost@4a064000 {
+	compatible = "ti,usbhs-host";
+	reg = <0x4a064000 0x800>;
+	ti,hwmods = "usb_host_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	usbhsohci: ohci@4a064800 {
+		compatible = "ti,ohci-omap3";
+		reg = <0x4a064800 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 76 0x4>;
+	};
+
+	usbhsehci: ehci@4a064c00 {
+		compatible = "ti,ehci-omap";
+		reg = <0x4a064c00 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 77 0x4>;
+	};
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-tll";
+	port3-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
new file mode 100644
index 0000000000..c58d70437f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
@@ -0,0 +1,27 @@
+OMAP HS USB Host TLL (Transceiver-Less Interface)
+
+Required properties:
+
+- compatible : should be "ti,usbhs-tll"
+- reg : should contain one register range i.e. start and length
+- interrupts : should contain the TLL module's interrupt
+- ti,hwmod : must contain "usb_tll_hs"
+
+Optional properties:
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+
+- clock-names: should include:
+  * "usb_tll_hs_usb_ch0_clk" - USB TLL channel 0 clock
+  * "usb_tll_hs_usb_ch1_clk" - USB TLL channel 1 clock
+  * "usb_tll_hs_usb_ch2_clk" - USB TLL channel 2 clock
+
+Example:
+
+	usbhstll: usbhstll@4a062000 {
+		compatible = "ti,usbhs-tll";
+		reg = <0x4a062000 0x1000>;
+		interrupts = <78>;
+		ti,hwmods = "usb_tll_hs";
+	  };
diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt
new file mode 100644
index 0000000000..e736ab3012
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/palmas.txt
@@ -0,0 +1,52 @@
+* palmas device tree bindings
+
+The TI palmas family current members :-
+twl6035 (palmas)
+twl6037 (palmas)
+tps65913 (palmas)
+tps65914 (palmas)
+tps659038
+tps65917
+
+Required properties:
+- compatible : Should be from the list
+  ti,twl6035
+  ti,twl6036
+  ti,twl6037
+  ti,tps65913
+  ti,tps65914
+  ti,tps80036
+  ti,tps659038
+  ti,tps65917
+and also the generic series names
+  ti,palmas
+- interrupt-controller : palmas has its own internal IRQs
+- #interrupt-cells : should be set to 2 for IRQ number and flags
+  The first cell is the IRQ number.
+  The second cell is the flags, encoded as the trigger masks from
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Optional properties:
+  ti,mux-padX : set the pad register X (1-2) to the correct muxing for the
+		hardware, if not set will use muxing in OTP.
+
+Example:
+
+palmas {
+	compatible = "ti,twl6035", "ti,palmas";
+	reg = <0x48>
+	interrupt-parent = <&intc>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	ti,mux-pad1 = <0>;
+	ti,mux-pad2 = <0>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pmic {
+		compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+		....
+	};
+}
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
new file mode 100644
index 0000000000..9e4eed34da
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8008 PMIC
+
+maintainers:
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+description: |
+  Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates
+  all the necessary power management, housekeeping, and interface support
+  functions into a single IC.
+
+properties:
+  compatible:
+    const: qcom,pm8008
+
+  reg:
+    description:
+      I2C slave address.
+
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description: Parent interrupt.
+
+  "#interrupt-cells":
+    const: 2
+
+    description: |
+      The first cell is the IRQ number, the second cell is the IRQ trigger
+      flag. All interrupts are listed in include/dt-bindings/mfd/qcom-pm8008.h.
+
+  interrupt-controller: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    type: object
+
+    description: |
+      The GPIO peripheral. This node may be specified twice, one for each GPIO.
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,pm8008-gpio
+          - const: qcom,spmi-gpio
+
+      reg:
+        description: Peripheral address of one of the two GPIO peripherals.
+        maxItems: 1
+
+      gpio-controller: true
+
+      gpio-ranges:
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      "#gpio-cells":
+        const: 2
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - interrupt-controller
+      - "#gpio-cells"
+      - gpio-ranges
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/qcom-pm8008.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    qupv3_se13_i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pm8008i@8 {
+        compatible = "qcom,pm8008";
+        reg = <0x8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+
+        pm8008_gpios: gpio@c000 {
+          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
+          reg = <0xc000>;
+          gpio-controller;
+          gpio-ranges = <&pm8008_gpios 0 0 2>;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
new file mode 100644
index 0000000000..9f03436b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -0,0 +1,337 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMICs multi-function device
+
+description: |
+  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
+  to the chip via the SPMI (System Power Management Interface) bus.
+  Support for multiple independent functions are implemented by splitting the
+  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
+  each. A function can consume one or more of these fixed-size register regions.
+
+  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
+  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
+  QPNP is effectively a partitioning scheme for dividing the SPMI extended
+  register space up into logical pieces, and set of fixed register
+  locations/definitions within these regions, with some of these regions
+  specifically used for interrupt handling.
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  $nodename:
+    oneOf:
+      - pattern: '^pmic@.*$'
+      - pattern: '^pm(a|s)?[0-9]*@.*$'
+        deprecated: true
+
+  compatible:
+    items:
+      - enum:
+          - qcom,pm2250
+          - qcom,pm6125
+          - qcom,pm6150
+          - qcom,pm6150l
+          - qcom,pm6350
+          - qcom,pm660
+          - qcom,pm660l
+          - qcom,pm7250b
+          - qcom,pm7550ba
+          - qcom,pm7325
+          - qcom,pm8004
+          - qcom,pm8005
+          - qcom,pm8009
+          - qcom,pm8010
+          - qcom,pm8019
+          - qcom,pm8028
+          - qcom,pm8110
+          - qcom,pm8150
+          - qcom,pm8150b
+          - qcom,pm8150c
+          - qcom,pm8150l
+          - qcom,pm8226
+          - qcom,pm8350
+          - qcom,pm8350b
+          - qcom,pm8350c
+          - qcom,pm8550
+          - qcom,pm8550b
+          - qcom,pm8550ve
+          - qcom,pm8550vs
+          - qcom,pm8841
+          - qcom,pm8909
+          - qcom,pm8916
+          - qcom,pm8941
+          - qcom,pm8950
+          - qcom,pm8953
+          - qcom,pm8994
+          - qcom,pm8998
+          - qcom,pma8084
+          - qcom,pmc8180
+          - qcom,pmc8180c
+          - qcom,pmd9635
+          - qcom,pmi632
+          - qcom,pmi8950
+          - qcom,pmi8962
+          - qcom,pmi8994
+          - qcom,pmi8998
+          - qcom,pmk8002
+          - qcom,pmk8350
+          - qcom,pmk8550
+          - qcom,pmm8155au
+          - qcom,pmm8654au
+          - qcom,pmp8074
+          - qcom,pmr735a
+          - qcom,pmr735b
+          - qcom,pmr735d
+          - qcom,pms405
+          - qcom,pmx55
+          - qcom,pmx65
+          - qcom,pmx75
+          - qcom,smb2351
+      - const: qcom,spmi-pmic
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  labibb:
+    type: object
+    $ref: /schemas/regulator/qcom-labibb-regulator.yaml#
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
+
+  pwm:
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml#
+      - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml#
+      - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
+
+  "^adc-tm@[0-9a-f]+$":
+    type: object
+    # ref depends on compatible, see allOf below
+
+  "^audio-codec@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
+
+  "^charger@[0-9a-f]+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
+      - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
+      - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
+
+  "gpio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
+
+  "^led-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/qcom,spmi-flash-led.yaml#
+
+  "^nvram@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
+
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
+
+  "pon@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/power/reset/qcom,pon.yaml#
+
+  "^rtc@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
+
+  "^temp-alarm@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
+
+  "^usb-detect@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
+
+  "^usb-vbus-regulator@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/regulator/qcom,usb-vbus-regulator.yaml#
+
+  "^vibrator@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/input/qcom,pm8xxx-vib.yaml#
+
+  "^mpps@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
+
+  "(.*)?(wled|leds)@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/backlight/qcom-wled.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998
+    then:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+    else:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spmi@c440000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg = <0x0c440000 0x1100>,
+              <0x0c600000 0x2000000>,
+              <0x0e600000 0x100000>,
+              <0x0e700000 0xa0000>,
+              <0x0c40a000 0x26000>;
+        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+        interrupt-names = "periph_irq";
+        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <4>;
+
+        pmi8998_lsid0: pmic@2 {
+            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+            reg = <0x2 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmi8998_gpio: gpio@c000 {
+                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+                reg = <0xc000>;
+                gpio-controller;
+                gpio-ranges = <&pmi8998_gpio 0 0 14>;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm6150", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8998-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            pwrkey {
+                compatible = "qcom,pm8941-pwrkey";
+                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                debounce = <15625>;
+                bias-pull-up;
+                linux,code = <KEY_POWER>;
+            };
+        };
+
+        temp-alarm@2400 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0x2400>;
+            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+            io-channel-names = "thermal";
+            #thermal-sensor-cells = <0>;
+        };
+
+        pm6150_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            channel@6 {
+                reg = <ADC5_DIE_TEMP>;
+                label = "die_temp";
+            };
+
+            channel@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            charger-thermistor@0 {
+                reg = <0>;
+                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+
+        pm6150_gpio: gpio@c000 {
+            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+            reg = <0xc000>;
+            gpio-controller;
+            gpio-ranges = <&pm6150_gpio 0 0 10>;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
new file mode 100644
index 0000000000..5ad9d5deaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Top Control and Status Register
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm devices have a set of registers that provide various control and
+  status functions for their peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8976-tcsr
+          - qcom,msm8998-tcsr
+          - qcom,qcs404-tcsr
+          - qcom,sc7180-tcsr
+          - qcom,sc7280-tcsr
+          - qcom,sc8280xp-tcsr
+          - qcom,sdm630-tcsr
+          - qcom,sdm845-tcsr
+          - qcom,sdx55-tcsr
+          - qcom,sdx65-tcsr
+          - qcom,sm8150-tcsr
+          - qcom,sm8450-tcsr
+          - qcom,tcsr-apq8064
+          - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq5332
+          - qcom,tcsr-ipq6018
+          - qcom,tcsr-ipq8064
+          - qcom,tcsr-ipq8074
+          - qcom,tcsr-ipq9574
+          - qcom,tcsr-mdm9615
+          - qcom,tcsr-msm8226
+          - qcom,tcsr-msm8660
+          - qcom,tcsr-msm8916
+          - qcom,tcsr-msm8953
+          - qcom,tcsr-msm8960
+          - qcom,tcsr-msm8974
+          - qcom,tcsr-msm8996
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1a400000 {
+        compatible = "qcom,tcsr-msm8960", "syscon";
+        reg = <0x1a400000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
new file mode 100644
index 0000000000..9c51c1b190
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC multi-function devices
+
+maintainers:
+  - Satya Priya <quic_c_skakit@quicinc.com>
+
+description: |
+  The PM8xxx family of Power Management ICs are used to provide regulated
+  voltages and other various functionality to Qualcomm SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8058
+          - qcom,pm8821
+          - qcom,pm8921
+      - items:
+          - enum:
+              - qcom,pm8018
+          - const: qcom,pm8921
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+patternProperties:
+  "led@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/qcom,pm8058-led.yaml#
+
+  "rtc@[0-9a-f]+$":
+    type: object
+    $ref: ../rtc/qcom-pm8xxx-rtc.yaml
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@0 {
+        compatible = "qcom,pm8921";
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/qriox.txt b/Documentation/devicetree/bindings/mfd/qriox.txt
new file mode 100644
index 0000000000..f301e2d4ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qriox.txt
@@ -0,0 +1,17 @@
+KEYMILE qrio Board Control CPLD
+
+The qrio is a multifunction device that controls the KEYMILE boards based on
+the kmp204x design.
+It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable
+GPIO blocks.
+
+Required properties:
+- compatible: "keymile,qriox"
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+	board-control@1,0 {
+		compatible = "keymile,qriox";
+		reg = <1 0 0x80>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/retu.txt b/Documentation/devicetree/bindings/mfd/retu.txt
new file mode 100644
index 0000000000..df3005dd3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/retu.txt
@@ -0,0 +1,24 @@
+* Device tree bindings for Nokia Retu and Tahvo multi-function device
+
+Retu and Tahvo are a multi-function devices found on Nokia Internet
+Tablets (770, N800 and N810). The Retu chip provides watchdog timer
+and power button control functionalities while Tahvo chip provides
+USB transceiver functionality.
+
+Required properties:
+- compatible:		"nokia,retu" or "nokia,tahvo"
+- reg:			Specifies the CBUS slave address of the ASIC chip
+- interrupts: 		The interrupt line the device is connected to
+
+Example:
+
+cbus0 {
+	compatible = "i2c-cbus-gpio";
+	...
+	retu: retu@1 {
+		compatible = "nokia,retu";
+		interrupt-parent = <&gpio4>;
+		interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+		reg = <0x1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml
new file mode 100644
index 0000000000..4762eb1439
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt4831.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt4831.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 DSV and Backlight Integrated IC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a multifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V.
+  It's sufficient to meet the current LCD power requirement.
+
+  For the LCD backlight, it can provide four channel WLED driving capability.
+  Each channel driving current is up to 30mA
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+properties:
+  compatible:
+    const: richtek,rt4831
+
+  reg:
+    description: I2C device address.
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      GPIO to enable/disable the chip. It is optional.
+      Some usage directly tied this pin to follow VIO 1.8V power on sequence.
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/richtek,rt4831-regulator.yaml
+
+  backlight:
+    $ref: ../leds/backlight/richtek,rt4831-backlight.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/rt4831-backlight.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt4831@11 {
+        compatible = "richtek,rt4831";
+        reg = <0x11>;
+
+        regulators {
+          DSVLCM {
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <7150000>;
+            regulator-allow-bypass;
+          };
+          DSVP {
+            regulator-name = "rt4831-dsvp";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6500000>;
+            regulator-boot-on;
+          };
+          DSVN {
+            regulator-name = "rt4831-dsvn";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6500000>;
+            regulator-boot-on;
+          };
+        };
+
+        backlight {
+          compatible = "richtek,rt4831-backlight";
+          default-brightness = <1024>;
+          max-brightness = <2048>;
+          richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>;
+          richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
new file mode 100644
index 0000000000..386b1a5015
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 Power Management Integrated Circuit
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  RT5033 is a multifunction device which includes battery charger, fuel gauge,
+  flash LED current source, LDO and synchronous Buck converter for portable
+  applications. It is interfaced to host controller using I2C interface. The
+  battery fuel gauge uses a separate I2C bus.
+
+properties:
+  compatible:
+    const: richtek,rt5033
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    description:
+      The regulators of RT5033 have to be instantiated under a sub-node named
+      "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO
+      voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges
+      from 1.0 V to 3.0 V in 0.1 V steps.
+    type: object
+    patternProperties:
+      "^(SAFE_LDO|LDO|BUCK)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+    additionalProperties: false
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    battery: battery {
+        compatible = "simple-battery";
+        precharge-current-microamp = <450000>;
+        constant-charge-current-max-microamp = <1000000>;
+        charge-term-current-microamp = <150000>;
+        precharge-upper-limit-microvolt = <3500000>;
+        constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    extcon {
+        usb_con: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            fuel-gauge@35 {
+                compatible = "richtek,rt5033-battery";
+                reg = <0x35>;
+
+                interrupt-parent = <&msmgpio>;
+                interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&fg_alert_default>;
+
+                power-supplies = <&rt5033_charger>;
+            };
+        };
+
+        i2c@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            pmic@34 {
+                compatible = "richtek,rt5033";
+                reg = <0x34>;
+
+                interrupt-parent = <&msmgpio>;
+                interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pmic_int_default>;
+
+                regulators {
+                    safe_ldo_reg: SAFE_LDO {
+                        regulator-name = "SAFE_LDO";
+                        regulator-min-microvolt = <4900000>;
+                        regulator-max-microvolt = <4900000>;
+                        regulator-always-on;
+                    };
+                    ldo_reg: LDO {
+                        regulator-name = "LDO";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                    };
+                    buck_reg: BUCK {
+                        regulator-name = "BUCK";
+                        regulator-min-microvolt = <1200000>;
+                        regulator-max-microvolt = <1200000>;
+                    };
+                };
+
+                rt5033_charger: charger {
+                    compatible = "richtek,rt5033-charger";
+                    monitored-battery = <&battery>;
+                    richtek,usb-connector = <&usb_con>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
new file mode 100644
index 0000000000..f73b8b25d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5120 PMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5120 provides four high-efficiency buck converters and one LDO voltage
+  regulator. The device is targeted at providingthe processor voltage, memory,
+  I/O, and peripheral rails in home entertainment devices. The I2C interface is
+  used for dynamic voltage scaling of the processor voltage, power rails on/off
+  sequence control, operation mode selection.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5120
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  wakeup-source: true
+
+  richtek,enable-undervolt-hiccup:
+    type: boolean
+    description: |
+      If used, under voltage protection trigger hiccup behavior, else latchup as
+      default
+
+  richtek,enable-overvolt-hiccup:
+    type: boolean
+    description:
+      Like as 'enable-uv-hiccup', it configures over voltage protection to
+      hiccup, else latchup as default
+
+  vin1-supply:
+    description: phandle for buck1 input power source
+
+  vin2-supply:
+    description: phandle for buck2 input power source
+
+  vin3-supply:
+    description: phandle for buck3 input power source
+
+  vin4-supply:
+    description: phandle for buck4 input power source
+
+  vinldo-supply:
+    description: phandle for ldo input power source
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+              Used to specify the allowed buck converter operating mode
+              mode mapping:
+                0: auto mode
+                1: force pwm mode
+            items:
+              enum: [0, 1]
+
+      "^(ldo|exten)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  powerkey:
+    type: object
+    description:
+      PON key that connected to RT5120 PMIC.
+
+    properties:
+      compatible:
+        enum:
+          - richtek,rt5120-pwrkey
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - regulators
+  - powerkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "richtek,rt5120";
+        reg = <0x62>;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        wakeup-source;
+
+        regulators {
+          buck1 {
+            regulator-name = "rt5120-buck1";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1393750>;
+            regulator-allowed-modes = <0 1>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5120-buck2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "rt5120-buck3";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "rt5120-buck4";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          ldo {
+            regulator-name = "rt5120-ldo";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+          exten {
+            regulator-name = "rt5120-exten";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+        };
+        powerkey {
+          compatible = "richtek,rt5120-pwrkey";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
new file mode 100644
index 0000000000..032a7fb0b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ricoh RN5T567/RN5T618/RC5T619 PMIC
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description: |
+  Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
+  integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
+  GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
+  The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
+  fuel gauge, and an ADC.
+  The RC5T619 additionally includes USB charger detection and an RTC.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ricoh,rn5t567
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
+              $ref: ../regulator/regulator.yaml
+          additionalProperties: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ricoh,rn5t618
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
+              $ref: ../regulator/regulator.yaml
+          additionalProperties: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ricoh,rc5t619
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
+              $ref: ../regulator/regulator.yaml
+          additionalProperties: false
+
+properties:
+  compatible:
+    enum:
+      - ricoh,rn5t567
+      - ricoh,rn5t618
+      - ricoh,rc5t619
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  system-power-controller:
+    type: boolean
+    description: |
+      See Documentation/devicetree/bindings/power/power-controller.txt
+
+  regulators:
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@32 {
+        compatible = "ricoh,rn5t618";
+        reg = <0x32>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+        system-power-controller;
+
+        regulators {
+          DCDC1 {
+            regulator-min-microvolt = <1050000>;
+            regulator-max-microvolt = <1050000>;
+          };
+
+          DCDC2 {
+            regulator-min-microvolt = <1175000>;
+            regulator-max-microvolt = <1175000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
new file mode 100644
index 0000000000..4992f71b6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK805 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD
+  that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG3.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-3])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@18 {
+            compatible = "rockchip,rk805";
+            reg = <0x18>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <0>;
+
+            vcc1-supply = <&vcc_sys>;
+            vcc2-supply = <&vcc_sys>;
+            vcc3-supply = <&vcc_sys>;
+            vcc4-supply = <&vcc_sys>;
+            vcc5-supply = <&vcc_io>;
+            vcc6-supply = <&vcc_io>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-name = "vcc_io";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_18: LDO_REG1 {
+                    regulator-name = "vdd_18";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc18_emmc: LDO_REG2 {
+                    regulator-name = "vcc_18emmc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_11: LDO_REG3 {
+                    regulator-name = "vdd_11";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
new file mode 100644
index 0000000000..cf2500f2e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
@@ -0,0 +1,406 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK806 Power Management Integrated Circuit
+
+maintainers:
+  - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+description:
+  Rockchip RK806 series PMIC. This device consists of an spi or
+  i2c controlled MFD that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk806
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  vcc1-supply:
+    description:
+      The input supply for dcdc-reg1.
+
+  vcc2-supply:
+    description:
+      The input supply for dcdc-reg2.
+
+  vcc3-supply:
+    description:
+      The input supply for dcdc-reg3.
+
+  vcc4-supply:
+    description:
+      The input supply for dcdc-reg4.
+
+  vcc5-supply:
+    description:
+      The input supply for dcdc-reg5.
+
+  vcc6-supply:
+    description:
+      The input supply for dcdc-reg6.
+
+  vcc7-supply:
+    description:
+      The input supply for dcdc-reg7.
+
+  vcc8-supply:
+    description:
+      The input supply for dcdc-reg8.
+
+  vcc9-supply:
+    description:
+      The input supply for dcdc-reg9.
+
+  vcc10-supply:
+    description:
+      The input supply for dcdc-reg10.
+
+  vcc11-supply:
+    description:
+      The input supply for pldo-reg1, pldo-reg2 and pldo-reg3.
+
+  vcc12-supply:
+    description:
+      The input supply for pldo-reg4 and pldo-reg5.
+
+  vcc13-supply:
+    description:
+      The input supply for nldo-reg1, nldo-reg2 and nldo-reg3.
+
+  vcc14-supply:
+    description:
+      The input supply for nldo-reg4 and nldo-reg5.
+
+  vcca-supply:
+    description:
+      The input supply for pldo-reg6.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+
+    properties:
+      function:
+        enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5]
+
+      pins:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3]
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@0 {
+            compatible = "rockchip,rk806";
+            reg = <0x0>;
+
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+            vcc1-supply = <&vcc5v0_sys>;
+            vcc2-supply = <&vcc5v0_sys>;
+            vcc3-supply = <&vcc5v0_sys>;
+            vcc4-supply = <&vcc5v0_sys>;
+            vcc5-supply = <&vcc5v0_sys>;
+            vcc6-supply = <&vcc5v0_sys>;
+            vcc7-supply = <&vcc5v0_sys>;
+            vcc8-supply = <&vcc5v0_sys>;
+            vcc9-supply = <&vcc5v0_sys>;
+            vcc10-supply = <&vcc5v0_sys>;
+            vcc11-supply = <&vcc_2v0_pldo_s3>;
+            vcc12-supply = <&vcc5v0_sys>;
+            vcc13-supply = <&vcc5v0_sys>;
+            vcc14-supply = <&vcc_1v1_nldo_s3>;
+            vcca-supply = <&vcc5v0_sys>;
+
+            regulators {
+                vdd_gpu_s0: dcdc-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_gpu_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_npu_s0: dcdc-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_npu_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_log_s0: dcdc-reg3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_log_s0";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <750000>;
+                    };
+                };
+
+                vdd_vdenc_s0: dcdc-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_vdenc_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu_mem_s0: dcdc-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_gpu_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_npu_mem_s0: dcdc-reg6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_npu_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_2v0_pldo_s3: dcdc-reg7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2000000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_2v0_pldo_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2000000>;
+                    };
+                };
+
+                vdd_vdenc_mem_s0: dcdc-reg8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <675000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_vdenc_mem_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd2_ddr_s3: dcdc-reg9 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vdd2_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v1_nldo_s3: dcdc-reg10 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_1v1_nldo_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+
+                avcc_1v8_s0: pldo-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "avcc_1v8_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd1_1v8_ddr_s3: pldo-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd1_1v8_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_1v8_s3: pldo-reg3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_1v8_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_3v3_s0: pldo-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vcc_3v3_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vccio_sd_s0: pldo-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vccio_sd_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                master_pldo6_s3: pldo-reg6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "master_pldo6_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_0v75_s3: nldo-reg1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-ramp-delay = <12500>;
+                    regulator-name = "vdd_0v75_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <750000>;
+                    };
+                };
+
+                vdd2l_0v9_ddr_s3: nldo-reg2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-name = "vdd2l_0v9_ddr_s3";
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <900000>;
+                    };
+                };
+
+                master_nldo3: nldo-reg3 {
+                    regulator-name = "master_nldo3";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                avdd_0v75_s0: nldo-reg4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-name = "avdd_0v75_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_0v85_s0: nldo-reg5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-name = "vdd_0v85_s0";
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
new file mode 100644
index 0000000000..f5908fa01a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK808 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk808
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3 and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG4 and LDO_REG5.
+
+  vcc10-supply:
+    description:
+      The input supply for LDO_REG6.
+
+  vcc11-supply:
+    description:
+      The input supply for LDO_REG8.
+
+  vcc12-supply:
+    description:
+      The input supply for SWITCH_REG2.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  dvs-gpios:
+    description: |
+      buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for
+      2 host gpio's used for dvs. The format of the gpio specifier
+      depends in the gpio controller. If DVS GPIOs aren't present,
+      voltage changes will happen very quickly with no slow ramp time.
+    maxItems: 2
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
+            dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+                <&gpio7 15 GPIO_ACTIVE_HIGH>;
+            reg = <0x1b>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc8-supply = <&vcc_18>;
+            vcc9-supply = <&vcc_io>;
+            vcc10-supply = <&vcc_io>;
+            vcc12-supply = <&vcc_io>;
+            vddio-supply = <&vccio_pmu>;
+
+            regulators {
+                vdd_cpu: DCDC_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-name = "vdd_arm";
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-name = "vdd_gpu";
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_ddr";
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_io";
+                };
+
+                vccio_pmu: LDO_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_pmu";
+                };
+
+                vcc_tp: LDO_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_tp";
+                };
+
+                vdd_10: LDO_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd_10";
+                };
+
+                vcc18_lcd: LDO_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc18_lcd";
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_sd";
+                };
+
+                vdd10_lcd: LDO_REG6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd10_lcd";
+                };
+
+                vcc_18: LDO_REG7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc_18";
+                };
+
+                vcca_codec: LDO_REG8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcca_codec";
+                };
+
+                vcc_wl: SWITCH_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_wl";
+                };
+
+                vcc_lcd: SWITCH_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_lcd";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
new file mode 100644
index 0000000000..7fb849ac74
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
@@ -0,0 +1,284 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK809 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk809
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for DCDC_REG5 and SWITCH_REG2.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            reg = <0x1b>;
+            #clock-cells = <1>;
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio3>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l_pin>;
+            rockchip,system-power-controller;
+            wakeup-source;
+
+            vcc1-supply = <&vcc_sysin>;
+            vcc2-supply = <&vcc_sysin>;
+            vcc3-supply = <&vcc_sysin>;
+            vcc4-supply = <&vcc_sysin>;
+            vcc6-supply = <&vcc_sysin>;
+            vcc7-supply = <&vcc_sysin>;
+            vcc8-supply = <&vcc3v3_sys>;
+            vcc9-supply = <&vcc_sysin>;
+            vcc10-supply = <&vcc_sysin>;
+            vcc11-supply = <&vcc_sysin>;
+            vcc12-supply = <&vcc3v3_sys>;
+
+            regulators {
+                vdd_center: DCDC_REG1 {
+                    regulator-name = "vdd_center";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_cpu_l: DCDC_REG2 {
+                    regulator-name = "vdd_cpu_l";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v8: vcc_wl: DCDC_REG4 {
+                    regulator-name = "vcc_1v8";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc1v8_pmupll: LDO_REG3 {
+                    regulator-name = "vcc1v8_pmupll";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_sdio: LDO_REG4 {
+                    regulator-name = "vcc_sdio";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcca3v0_codec: LDO_REG5 {
+                    regulator-name = "vcca3v0_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_1v5: LDO_REG6 {
+                    regulator-name = "vcc_1v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1500000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1500000>;
+                    };
+                };
+
+                vcca1v8_codec: LDO_REG7 {
+                    regulator-name = "vcca1v8_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_3v0: LDO_REG8 {
+                    regulator-name = "vcc_3v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcc3v3_s3: SWITCH_REG1 {
+                    regulator-name = "vcc3v3_s3";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc3v3_s0: SWITCH_REG2 {
+                    regulator-name = "vcc3v3_s0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
new file mode 100644
index 0000000000..269fb85b20
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK817 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, a power button, an audio codec, and a
+  battery charger manager.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk817
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for BOOST.
+
+  vcc9-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
+        type: object
+        unevaluatedProperties: false
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    description:
+      The input clock for the audio codec.
+
+  clock-names:
+    description:
+      The clock name for the codec clock.
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    description:
+      Needed for the interpretation of sound dais.
+    const: 0
+
+  codec:
+    description: |
+      The child node for the codec to hold additional properties. If no
+      additional properties are required for the codec, this node can be
+      omitted.
+    type: object
+    additionalProperties: false
+    properties:
+      rockchip,mic-in-differential:
+        type: boolean
+        description:
+          Describes if the microphone uses differential mode.
+
+  charger:
+    description: |
+      The child node for the charger to hold additional properties. If a
+      battery is not in use, this node can be omitted.
+    type: object
+    $ref: /schemas/power/supply/power-supply.yaml
+
+    properties:
+      monitored-battery:
+        description: |
+          A phandle to a monitored battery node that contains a valid
+          value for:
+          charge-full-design-microamp-hours,
+          charge-term-current-microamp,
+          constant-charge-current-max-microamp,
+          constant-charge-voltage-max-microvolt,
+          voltage-max-design-microvolt,
+          voltage-min-design-microvolt,
+          and a valid ocv-capacity table.
+
+      rockchip,resistor-sense-micro-ohms:
+        description: |
+          Value in microohms of the battery sense resistor. This value is
+          used by the driver to set the correct divisor value to translate
+          ADC readings into the proper units of measure.
+        enum: [10000, 20000]
+
+      rockchip,sleep-enter-current-microamp:
+        description: |
+          Value in microamps of the sleep enter current for the charger.
+          Value is used by the driver to calibrate the relax threshold.
+
+      rockchip,sleep-filter-current-microamp:
+        description:
+          Value in microamps of the sleep filter current for the charger.
+          Value is used by the driver to derive the sleep sample current.
+
+    required:
+      - monitored-battery
+      - rockchip,resistor-sense-micro-ohms
+      - rockchip,sleep-enter-current-microamp
+      - rockchip,sleep-filter-current-microamp
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk817: pmic@20 {
+            compatible = "rockchip,rk817";
+            reg = <0x20>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+            clock-output-names = "rk808-clkout1", "xin32k";
+            clock-names = "mclk";
+            clocks = <&cru SCLK_I2S1_OUT>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+            wakeup-source;
+            #clock-cells = <1>;
+            #sound-dai-cells = <0>;
+
+            vcc1-supply = <&vccsys>;
+            vcc2-supply = <&vccsys>;
+            vcc3-supply = <&vccsys>;
+            vcc4-supply = <&vccsys>;
+            vcc5-supply = <&vccsys>;
+            vcc6-supply = <&vccsys>;
+            vcc7-supply = <&vccsys>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_3v3: DCDC_REG4 {
+                    regulator-name = "vcc_3v3";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_1v8: LDO_REG2 {
+                    regulator-name = "vcc_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc3v3_pmu: LDO_REG4 {
+                    regulator-name = "vcc3v3_pmu";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-name = "vccio_sd";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_sd: LDO_REG6 {
+                    regulator-name = "vcc_sd";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_bl: LDO_REG7 {
+                    regulator-name = "vcc_bl";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_lcd: LDO_REG8 {
+                    regulator-name = "vcc_lcd";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <2800000>;
+                    };
+                };
+
+                vcc_cam: LDO_REG9 {
+                    regulator-name = "vcc_cam";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+            };
+
+            rk817_charger: charger {
+                monitored-battery = <&battery>;
+                rockchip,resistor-sense-micro-ohms = <10000>;
+                rockchip,sleep-enter-current-microamp = <300000>;
+                rockchip,sleep-filter-current-microamp = <100000>;
+            };
+
+            rk817_codec: codec {
+                rockchip,mic-in-differential;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
new file mode 100644
index 0000000000..b57c4b005c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK818 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk818
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  boost-supply:
+    description:
+      The input supply for DCDC_BOOST
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3, LDO_REG5, and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG6, and LDO_REG8.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG9 and SWITCH_REG.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  h_5v-supply:
+    description:
+      The input supply for HDMI_SWITCH.
+
+  usb-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk818: pmic@1c {
+            compatible = "rockchip,rk818";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc1-supply = <&vdd_sys>;
+            vcc2-supply = <&vdd_sys>;
+            vcc3-supply = <&vdd_sys>;
+            vcc4-supply = <&vdd_sys>;
+            boost-supply = <&vdd_in_otg_out>;
+            vcc6-supply = <&vdd_sys>;
+            vcc7-supply = <&vdd_misc_1v8>;
+            vcc8-supply = <&vdd_misc_1v8>;
+            vcc9-supply = <&vdd_3v3_io>;
+            vddio-supply = <&vdd_3v3_io>;
+
+            regulators {
+                vdd_log: DCDC_REG1 {
+                    regulator-name = "vdd_log";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-name = "vdd_gpu";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vdd_3v3_io: DCDC_REG4 {
+                    regulator-name = "vdd_3v3_io";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_sys: DCDC_BOOST {
+                    regulator-name = "vdd_sys";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <5000000>;
+                    };
+                };
+
+                vdd_sd: SWITCH_REG {
+                    regulator-name = "vdd_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_eth_2v5: LDO_REG2 {
+                    regulator-name = "vdd_eth_2v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <2500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2500000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_lcd_ldo: LDO_REG4 {
+                    regulator-name = "vdd_1v8_lcd_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0_lcd: LDO_REG6 {
+                    regulator-name = "vdd_1v0_lcd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_ldo: LDO_REG7 {
+                    regulator-name = "vdd_1v8_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_io_sd: LDO_REG9 {
+                    regulator-name = "vdd_io_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
new file mode 100644
index 0000000000..05747e0125
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  BD71815AGW is a single-chip power management ICs for battery-powered
+  portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver
+  for LED and a 500 mA single-cell linear charger. Also included is a Coulomb
+  counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs.
+
+properties:
+  compatible:
+    const: rohm,bd71815
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: bd71815-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  rohm,charger-sense-resistor-ohms:
+    minimum: 10000000
+    maximum: 50000000
+    description: |
+      BD71827 and BD71828 have SAR ADC for measuring charging currents.
+      External sense resistor (RSENSE in data sheet) should be used. If
+      something other but 30MOhm resistor is used the resistance value
+      should be given here in Ohms.
+    default: 30000000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71815-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  gpio-reserved-ranges:
+    description: |
+      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      used to mark the pins which should not be configured for GPIO. Please see
+      the ../gpio/gpio.txt for more information.
+
+  rohm,enable-hidden-gpo:
+    description: |
+      The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
+      data-sheet as its location in the middle of GND pins makes it hard to
+      use on PCB. If your board has managed to use this pin you can enable the
+      second GPO by defining this property. Dont enable this if you are unsure
+      about how the E5 pin is connected on your board.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71815";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71815-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1150000>;
+                    rohm,dvs-suspend-voltage = <950000>;
+                };
+                buck2: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1150000>;
+                    rohm,dvs-suspend-voltage = <950000>;
+                };
+                buck3: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2700000>;
+                    regulator-always-on;
+                };
+                buck4: buck4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1850000>;
+                    regulator-always-on;
+                };
+                buck5: buck5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo1: ldo1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo2: ldo2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo3: ldo3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo4: ldo4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo5: ldo5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+                ldo6: ldodvref {
+                    regulator-name = "ldodvref";
+                    regulator-always-on;
+                };
+                ldo7: ldolpsr {
+                    regulator-name = "ldolpsr";
+                    regulator-always-on;
+                };
+
+                boost: wled {
+                    regulator-name = "wled";
+                    regulator-min-microamp = <10>;
+                    regulator-max-microamp = <25000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
new file mode 100644
index 0000000000..11089aa89e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  BD71828GW is a single-chip power management IC for battery-powered portable
+  devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
+  single-cell linear charger. Also included is a Coulomb counter, a real-time
+  clock (RTC), and a 32.768 kHz clock gate.
+
+properties:
+  compatible:
+    const: rohm,bd71828
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: bd71828-32k-out
+
+  rohm,clkout-open-drain:
+    description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  rohm,charger-sense-resistor-ohms:
+    minimum: 10000000
+    maximum: 50000000
+    description: |
+      BD71827 and BD71828 have SAR ADC for measuring charging currents.
+      External sense resistor (RSENSE in data sheet) should be used. If some
+      other but 30MOhm resistor is used the resistance value should be given
+      here in Ohms.
+
+  regulators:
+    $ref: ../regulator/rohm,bd71828-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  leds:
+    $ref: ../leds/rohm,bd71828-leds.yaml
+
+  gpio-reserved-ranges:
+    description: |
+      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      used to mark the pins which should not be configured for GPIO. Please see
+      the ../gpio/gpio.txt for more information.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71828";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71828-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-reserved-ranges = <0 1>, <2 1>;
+
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2000000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+
+            leds {
+                compatible = "rohm,bd71828-leds";
+
+                led-1 {
+                    rohm,led-compatible = "bd71828-grnled";
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+                led-2 {
+                    rohm,led-compatible = "bd71828-ambled";
+                    function = LED_FUNCTION_CHARGING;
+                    color = <LED_COLOR_ID_AMBER>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
new file mode 100644
index 0000000000..7aa343f58c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71837 Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  BD71837MWV is programmable Power Management ICs for powering single-core,
+  dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for low
+  BOM cost and compact solution footprint. BD71837MWV  integrates 8 Buck
+  regulators and 7 LDOs.
+  Datasheet for BD71837 is available at
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71837amwv-product
+
+properties:
+  compatible:
+    const: rohm,bd71837
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    const: pmic_clk
+
+# The BD718x7 supports two different HW states as reset target states. States
+# are called as SNVS and READY. At READY state all the PMIC power outputs go
+# down and OTP is reload. At the SNVS state all other logic and external
+# devices apart from the SNVS power domain are shut off. Please refer to NXP
+# i.MX8 documentation for further information regarding SNVS state. When a
+# reset is done via SNVS state the PMIC OTP data is not reload. This causes
+# power outputs that have been under SW control to stay down when reset has
+# switched power state to SNVS. If reset is done via READY state the power
+# outputs will be returned to HW control by OTP loading. Thus the reset
+# target state is set to READY by default. If SNVS state is used the boot
+# crucial regulators must have the regulator-always-on and regulator-boot-on
+# properties set in regulator node.
+
+  rohm,reset-snvs-powered:
+    description: |
+      Transfer PMIC to SNVS state at reset
+    type: boolean
+
+# Configure the "short press" and "long press" timers for the power button.
+# Values are rounded to what hardware supports
+# Short-press:
+#   Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
+# Long-press:
+#   Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
+# If these properties are not present the existing configuration (from
+# bootloader or OTP) is not touched.
+
+  rohm,short-press-ms:
+    description:
+      Short press duration in milliseconds
+    enum:
+      - 10
+      - 500
+      - 1000
+      - 1500
+      - 2000
+      - 2500
+      - 3000
+      - 3500
+      - 4000
+      - 4500
+      - 5000
+      - 5500
+      - 6000
+      - 6500
+      - 7000
+
+  rohm,long-press-ms:
+    description:
+      Long press duration in milliseconds
+    enum:
+      - 10
+      - 1000
+      - 2000
+      - 3000
+      - 4000
+      - 5000
+      - 6000
+      - 7000
+      - 8000
+      - 9000
+      - 10000
+      - 11000
+      - 12000
+      - 13000
+      - 14000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71837-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71837";
+            reg = <0x4b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            #clock-cells = <0>;
+            clocks = <&osc 0>;
+            rohm,reset-snvs-powered;
+            rohm,short-press-ms = <10>;
+            rohm,long-press-ms = <2000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <900000>;
+                    rohm,dvs-idle-voltage = <850000>;
+                    rohm,dvs-suspend-voltage = <800000>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1000000>;
+                    rohm,dvs-idle-voltage = <900000>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    rohm,dvs-run-voltage = <1000000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    rohm,dvs-run-voltage = <1000000>;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-boot-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <1605000>;
+                    regulator-max-microvolt = <1995000>;
+                    regulator-boot-on;
+                };
+                buck8: BUCK8 {
+                    regulator-name = "buck8";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
new file mode 100644
index 0000000000..d783cc4e4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering
+  single-core,  dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is
+  optimized for low BOM cost and compact solution footprint. BD71847MWV and
+  BD71850MWV integrate 6 Buck regulators and 6 LDOs.
+  Datasheets are available at
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71847amwv-product
+  https://www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applications/nxp-imx/bd71850mwv-product
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd71847
+      - rohm,bd71850
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+# The BD71847 abd BD71850 support two different HW states as reset target
+# states. States are called as SNVS and READY. At READY state all the PMIC
+# power outputs go down and OTP is reload. At the SNVS state all other logic
+# and external devices apart from the SNVS power domain are shut off. Please
+# refer to NXP i.MX8 documentation for further information regarding SNVS
+# state. When a reset is done via SNVS state the PMIC OTP data is not reload.
+# This causes power outputs that have been under SW control to stay down when
+# reset has switched power state to SNVS. If reset is done via READY state the
+# power outputs will be returned to HW control by OTP loading. Thus the reset
+# target state is set to READY by default. If SNVS state is used the boot
+# crucial regulators must have the regulator-always-on and regulator-boot-on
+# properties set in regulator node.
+
+  rohm,reset-snvs-powered:
+    description:
+      Transfer PMIC to SNVS state at reset.
+    type: boolean
+
+# Configure the "short press" and "long press" timers for the power button.
+# Values are rounded to what hardware supports
+# Short-press:
+#   Shortest being 10ms, next 500ms and then multiple of 500ms up to 7,5s
+# Long-press:
+#   Shortest being 10ms, next 1000ms and then multiple of 1000ms up to 15s
+# If these properties are not present the existing # configuration (from
+# bootloader or OTP) is not touched.
+
+  rohm,short-press-ms:
+    description:
+      Short press duration in milliseconds
+    enum:
+      - 10
+      - 500
+      - 1000
+      - 1500
+      - 2000
+      - 2500
+      - 3000
+      - 3500
+      - 4000
+      - 4500
+      - 5000
+      - 5500
+      - 6000
+      - 6500
+      - 7000
+      - 7500
+
+  rohm,long-press-ms:
+    description:
+      Long press duration in milliseconds
+    enum:
+      - 10
+      - 1000
+      - 2000
+      - 3000
+      - 4000
+      - 5000
+      - 6000
+      - 7000
+      - 8000
+      - 9000
+      - 10000
+      - 11000
+      - 12000
+      - 13000
+      - 14000
+      - 15000
+
+  regulators:
+    $ref: ../regulator/rohm,bd71847-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+dependencies:
+  '#clock-cells': [clocks]
+  clocks: ['#clock-cells']
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71847";
+            reg = <0x4b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            #clock-cells = <0>;
+            clocks = <&osc 0>;
+            rohm,reset-snvs-powered;
+            rohm,short-press-ms = <10>;
+            rohm,long-press-ms = <2000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <900000>;
+                    rohm,dvs-idle-voltage = <850000>;
+                    rohm,dvs-suspend-voltage = <800000>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <1250>;
+                    rohm,dvs-run-voltage = <1000000>;
+                    rohm,dvs-idle-voltage = <900000>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <550000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-boot-on;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <2600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <1605000>;
+                    regulator-max-microvolt = <1995000>;
+                    regulator-boot-on;
+                };
+                buck8: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <900000>;
+                    regulator-boot-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
new file mode 100644
index 0000000000..89f9efee46
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd9571mwv
+      - rohm,bd9574mwf
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rohm,ddr-backup-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+    description: |
+      Value to use for DDR-Backup Power (default 0).
+      This is a bitmask that specifies which DDR power rails need to be kept
+      powered when backup mode is entered, for system suspend:
+        - bit 0: DDR0
+        - bit 1: DDR1
+        - bit 2: DDR0C
+        - bit 3: DDR1C
+      These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
+      Mode Cnt" register.
+
+  rohm,rstbmode-level:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for level mode, to accommodate a toggle
+      power switch (the RSTBMODE pin is strapped low).
+
+  rohm,rstbmode-pulse:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for pulse mode, to accommodate a momentary
+      power switch (the RSTBMODE pin is strapped high).
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts.
+
+    patternProperties:
+      "^(vd09|vd18|vd25|vd33|dvfs)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+        properties:
+          regulator-name:
+            pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+oneOf:
+  - required:
+      - rohm,rstbmode-level
+  - required:
+      - rohm,rstbmode-pulse
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic: pmic@30 {
+                  compatible = "rohm,bd9571mwv";
+                  reg = <0x30>;
+                  interrupt-parent = <&gpio2>;
+                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                  interrupt-controller;
+                  #interrupt-cells = <2>;
+                  gpio-controller;
+                  #gpio-cells = <2>;
+                  rohm,ddr-backup-power = <0xf>;
+                  rohm,rstbmode-pulse;
+
+                  regulators {
+                          dvfs: dvfs {
+                                  regulator-name = "dvfs";
+                                  regulator-min-microvolt = <750000>;
+                                  regulator-max-microvolt = <1030000>;
+                                  regulator-boot-on;
+                                  regulator-always-on;
+                          };
+                  };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
new file mode 100644
index 0000000000..b7b323b1a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  BD9576MUF and BD9573MUF are power management ICs primarily intended for
+  powering the R-Car series processors.
+  The IC provides 6 power outputs with configurable sequencing and safety
+  monitoring. A watchdog logic with slow ping/windowed modes is also included.
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd9576
+      - rohm,bd9573
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  rohm,vout1-en-low:
+    description:
+      BD9576 and BD9573 VOUT1 regulator enable state can be individually
+      controlled by a GPIO. This is dictated by state of vout1-en pin during
+      the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1
+      enable state is controlled via this pin. Set this property if vout1-en
+      is wired to be down at PMIC start-up.
+    type: boolean
+
+  rohm,vout1-en-gpios:
+    description:
+      GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF
+      state control.
+    maxItems: 1
+
+  rohm,ddr-sel-low:
+    description:
+      The BD9576 and BD9573 output voltage for DDR can be selected by setting
+      the ddr-sel pin low or high. Set this property if ddr-sel is grounded.
+    type: boolean
+
+  rohm,watchdog-enable-gpios:
+    description: The GPIO line used to enable the watchdog.
+    maxItems: 1
+
+  rohm,watchdog-ping-gpios:
+    description: The GPIO line used to ping the watchdog.
+    maxItems: 1
+
+  rohm,hw-timeout-ms:
+    maxItems: 2
+    description:
+      Watchdog timeout in milliseconds. If single value is given it is
+      the maximum timeout. Eg. if pinging watchdog is not done within this time
+      limit the watchdog will be triggered. If two values are given watchdog
+      is configured in "window mode". Then first value is limit for short-ping
+      Eg. if watchdog is pinged sooner than that the watchdog will trigger.
+      When two values is given the second value is the maximum timeout.
+      # (HW) minimum for short timeout is 2ms, maximum 220 ms.
+      # (HW) minimum for max timeout is 4ms, maximum 4416 ms.
+
+  regulators:
+    $ref: ../regulator/rohm,bd9576-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@30 {
+            compatible = "rohm,bd9576";
+            reg = <0x30>;
+            rohm,vout1-en-low;
+            rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+            rohm,ddr-sel-low;
+            rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+            rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+            rohm,hw-timeout-ms = <150>, <2300>;
+
+            regulators {
+                boost1: regulator-vd50 {
+                    regulator-name = "VD50";
+                };
+                buck1: regulator-vd18 {
+                    regulator-name = "VD18";
+                };
+                buck2: regulator-vdddr {
+                    regulator-name = "VDDDR";
+                };
+                buck3: regulator-vd10 {
+                    regulator-name = "VD10";
+                };
+                ldo: regulator-voutl1 {
+                    regulator-name = "VOUTL1";
+                };
+                sw: regulator-vouts1 {
+                    regulator-name = "VOUTS1";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
new file mode 100644
index 0000000000..b97b068487
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5433-lpass
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sfr0_ctrl
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-controller@[0-9a-f]+$":
+    $ref: /schemas/dma/arm,pl330.yaml
+
+  "^i2s@[0-9a-f]+$":
+    $ref: /schemas/sound/samsung-i2s.yaml
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - reg
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    audio-subsystem@11400000 {
+        compatible = "samsung,exynos5433-lpass";
+        reg = <0x11400000 0x100>, <0x11500000 0x08>;
+        clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+        clock-names = "sfr0_ctrl";
+        power-domains = <&pd_aud>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        dma-controller@11420000 {
+            compatible = "arm,pl330", "arm,primecell";
+            reg = <0x11420000 0x1000>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_ACLK_DMAC>;
+            clock-names = "apb_pclk";
+            #dma-cells = <1>;
+            dma-channels = <8>;
+            dma-requests = <32>;
+            power-domains = <&pd_aud>;
+        };
+
+        i2s@11440000 {
+            compatible = "samsung,exynos7-i2s";
+            reg = <0x11440000 0x100>;
+            dmas = <&adma 0>, <&adma 2>;
+            dma-names = "tx", "rx";
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_I2S_BCLK>;
+            clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+            #clock-cells = <1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&i2s0_bus>;
+            power-domains = <&pd_aud>;
+            #sound-dai-cells = <1>;
+        };
+
+        serial@11460000 {
+            compatible = "samsung,exynos5433-uart";
+            reg = <0x11460000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+                     <&cmu_aud CLK_SCLK_AUD_UART>;
+            clock-names = "uart", "clk_uart_baud0";
+            pinctrl-names = "default";
+            pinctrl-0 = <&uart_aud_bus>;
+            power-domains = <&pd_aud>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
new file mode 100644
index 0000000000..055dfc337c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPA01 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s2mpa01-pmic
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s2mpa01.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mpa01-pmic";
+            reg = <0x66>;
+
+            regulators {
+                ldo1_reg: LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                };
+
+                ldo2_reg: LDO2 {
+                    regulator-name = "VDDQ_MMC2";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                buck1_reg: BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck2_reg: BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <50000>;
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
new file mode 100644
index 0000000000..5ff6546c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
+  which include voltage and current regulators, RTC, clock outputs and other
+  sub-blocks.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-pmic
+      - samsung,s2mps13-pmic
+      - samsung,s2mps14-pmic
+      - samsung,s2mps15-pmic
+      - samsung,s2mpu02-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulators.
+
+  samsung,s2mps11-acokb-ground:
+    description: |
+      Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
+      the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
+      power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
+      low, the rising ACOKB will trigger power off.
+    type: boolean
+
+  samsung,s2mps11-wrstbi-ground:
+    description: |
+      Indicates that WRSTBI pin of PMIC is pulled down. When the system is
+      suspended it will always go down thus triggerring unwanted buck warm
+      reset (setting buck voltages to default values).
+    type: boolean
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps11-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps11.yaml
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps13-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps13.yaml
+        samsung,s2mps11-acokb-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps14-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps14.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps15-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps15.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpu02-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mpu02.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps11-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s2mps11_irq>;
+            samsung,s2mps11-acokb-ground;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps11-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO4 {
+                    regulator-name = "vdd_adc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ....
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK3 {
+                    regulator-name = "vdd_int";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck2_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps14-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps14-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VLDO1_1.0V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VBUCK1_1.0V";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
new file mode 100644
index 0000000000..aea0b7d57d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S5M8767 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s5m8767-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s5m8767.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  s5m8767,pmic-buck2-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck2 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck3-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck3 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck4-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck4 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck-ds-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
+      It is one-to-one mapped to dvs gpio lines.
+
+  s5m8767,pmic-buck2-uses-gpio-dvs:
+    type: boolean
+    description: buck2 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck3-uses-gpio-dvs:
+    type: boolean
+    description: buck3 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck4-uses-gpio-dvs:
+    type: boolean
+    description: buck4 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck-default-dvs-idx:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minimum: 0
+    maximum: 7
+    default: 0
+    description: |
+      Default voltage setting selected from the possible 8 options selectable
+      by the dvs gpios. The value of this property should be between 0 and 7.
+      If not specified or if out of range, the default value of this property
+      is set to 0.
+
+  s5m8767,pmic-buck-dvs-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for dvs.
+
+  vinb1-supply:
+    description: Power supply for buck1
+  vinb2-supply:
+    description: Power supply for buck2
+  vinb3-supply:
+    description: Power supply for buck3
+  vinb4-supply:
+    description: Power supply for buck4
+  vinb5-supply:
+    description: Power supply for buck5
+  vinb6-supply:
+    description: Power supply for buck6
+  vinb7-supply:
+    description: Power supply for buck7
+  vinb8-supply:
+    description: Power supply for buck8
+  vinb9-supply:
+    description: Power supply for buck9
+
+  vinl1-supply:
+    description: Power supply for LDO3, LDO10, LDO26, LDO27
+  vinl2-supply:
+    description: Power supply for LDO13, LDO16, LDO25, LDO28
+  vinl3-supply:
+    description: Power supply for LDO11, LDO14
+  vinl4-supply:
+    description: Power supply for LDO4, LDO9
+  vinl5-supply:
+    description: Power supply for LDO12, LDO17, LDO19, LDO23
+  vinl6-supply:
+    description: Power supply for LDO18, LDO20, LDO21, LDO24
+  vinl7-supply:
+    description: Power supply for LDO5, LDO22
+  vinl8-supply:
+    description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
+  vinl9-supply:
+    description: Power supply for LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - s5m8767,pmic-buck-ds-gpios
+
+dependencies:
+  s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
+  s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
+  s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
+
+additionalProperties: false
+
+allOf:
+  - not:
+      required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+        - s5m8767,pmic-buck3-uses-gpio-dvs
+  - not:
+      required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+  - not:
+      required:
+        - s5m8767,pmic-buck3-uses-gpio-dvs
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-default-dvs-idx = <3>;
+            s5m8767,pmic-buck2-uses-gpio-dvs;
+
+            s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 1 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 2 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+                                             <1250000>, <1200000>,
+                                             <1150000>, <1100000>,
+                                             <1000000>, <950000>;
+
+            s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+                                             <1100000>, <1100000>,
+                                             <1000000>, <1000000>,
+                                             <1000000>, <1000000>;
+
+            s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 0000000000..ee0be32ac0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+properties:
+  compatible:
+    const: silergy,sy7636a
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  epd-pwr-good-gpios:
+    description:
+      Specifying the power good GPIOs.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          The regulator for the compenstation voltage. Enabling/disabling this
+          enables/disables the entire device.
+        properties:
+          regulator-name:
+            const: vcom
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "silergy,sy7636a";
+        reg = <0x62>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_epdpmic>;
+        #thermal-sensor-cells = <0>;
+
+        regulators {
+          reg_epdpmic: vcom {
+            regulator-name = "vcom";
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
new file mode 100644
index 0000000000..511764acd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -0,0 +1,35 @@
+SKY81452 bindings
+
+Required properties:
+- compatible	: Must be "skyworks,sky81452"
+- reg		: I2C slave address
+
+Required child nodes:
+- backlight	: container node for backlight following the binding
+		in leds/backlight/sky81452-backlight.txt
+- regulator	: container node for regulators following the binding
+		in regulator/sky81452-regulator.txt
+
+Example:
+
+	sky81452@2c {
+		compatible = "skyworks,sky81452";
+		reg = <0x2c>;
+
+		backlight {
+			compatible = "skyworks,sky81452-backlight";
+			name = "pwm-backlight";
+			led-sources = <0 1 2 3 6>;
+			skyworks,ignore-pwm;
+			skyworks,phase-shift;
+			skyworks,current-limit = <2300>;
+		};
+
+		regulator {
+			lout {
+				regulator-name = "sky81452-lout";
+				regulator-min-microvolt = <4500000>;
+				regulator-max-microvolt = <8000000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt
new file mode 100644
index 0000000000..21b9a897fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt
@@ -0,0 +1,40 @@
+Spreadtrum SC27xx Power Management Integrated Circuit (PMIC)
+
+The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730
+and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all
+mobile handset power management, audio codec, battery management and user
+interface support function in a single chip. It has 6 major functional
+blocks:
+- DCDCs to support CPU, memory.
+- LDOs to support both internal and external requirement.
+- Battery management system, such as charger, fuel gauge.
+- Audio codec.
+- User interface function, such as indicator, flash LED and so on.
+- IC level interface, such as power on/off control, RTC and typec and so on.
+
+Required properties:
+- compatible: Should be one of the following:
+	"sprd,sc2720"
+	"sprd,sc2721"
+	"sprd,sc2723"
+	"sprd,sc2730"
+	"sprd,sc2731"
+- reg: The address of the device chip select, should be 0.
+- spi-max-frequency: Typically set to 26000000.
+- interrupts: The interrupt line the device is connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2.
+- #address-cells: Child device offset number of cells, must be 1.
+- #size-cells: Child device size number of cells, must be 0.
+
+Example:
+pmic@0 {
+	compatible = "sprd,sc2731";
+	reg = <0>;
+	spi-max-frequency = <26000000>;
+	interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
new file mode 100644
index 0000000000..996bd4a17c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc System Global Register
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  Unisoc system global registers provide register map
+  for clocks and some multimedia modules of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: sprd,ums512-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/sprd,ums512-clk.yaml#
+    description:
+      Clock controller for the SoC clocks.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_apb_regs: syscon@71000000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x71000000 0x3000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x71000000 0x3000>;
+
+      clock-controller@0 {
+        compatible = "sprd,ums512-apahb-gate";
+        reg = <0x0 0x2000>;
+        #clock-cells = <1>;
+      };
+    };
+
+  - |
+    ap_intc5_regs: syscon@32360000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x32360000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
new file mode 100644
index 0000000000..27329c5dc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Low-Power Timers
+
+description: |
+  The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
+  functions
+   - PWM output (with programmable prescaler, configurable polarity)
+   - Trigger source for STM32 ADC/DAC (LPTIM_OUT)
+   - Several counter modes:
+     - quadrature encoder to detect angular position and direction of rotary
+       elements, from IN1 and IN2 input signals.
+     - simple counter from IN1 input signal.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-lptimer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mux
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  wakeup-source: true
+
+  pwm:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-pwm-lp
+
+      "#pwm-cells":
+        const: 3
+
+    required:
+      - "#pwm-cells"
+      - compatible
+
+  counter:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-lptimer-counter
+
+    required:
+      - compatible
+
+  timer:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-lptimer-timer
+
+    required:
+      - compatible
+
+patternProperties:
+  "^trigger@[0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-lptimer-trigger
+
+      reg:
+        description: Identify trigger hardware block.
+        items:
+          minimum: 0
+          maximum: 2
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    timer@40002400 {
+      compatible = "st,stm32-lptimer";
+      reg = <0x40002400 0x400>;
+      clocks = <&timer_clk>;
+      clock-names = "mux";
+      interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pwm {
+        compatible = "st,stm32-pwm-lp";
+        #pwm-cells = <3>;
+      };
+
+      trigger@0 {
+        compatible = "st,stm32-lptimer-trigger";
+        reg = <0>;
+      };
+
+      counter {
+        compatible = "st,stm32-lptimer-counter";
+      };
+
+      timer {
+        compatible = "st,stm32-lptimer-timer";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
new file mode 100644
index 0000000000..f84e09a574
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Timers
+
+description: |
+  This hardware block provides 3 types of timer along with PWM functionality:
+    - advanced-control timers consist of a 16-bit auto-reload counter driven
+      by a programmable prescaler, break input feature, PWM outputs and
+      complementary PWM outputs channels.
+    - general-purpose timers consist of a 16-bit or 32-bit auto-reload counter
+      driven by a programmable prescaler and PWM outputs.
+    - basic timers consist of a 16-bit auto-reload counter driven by a
+      programmable prescaler.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-timers
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: int
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 7
+
+  dma-names:
+    items:
+      enum: [ ch1, ch2, ch3, ch4, up, trig, com ]
+    minItems: 1
+    maxItems: 7
+
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: global
+      - items:
+          - const: brk
+          - const: up
+          - const: trg-com
+          - const: cc
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  pwm:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-pwm
+
+      "#pwm-cells":
+        const: 3
+
+      st,breakinput:
+        description:
+          One or two <index level filter> to describe break input
+          configurations.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "index" indicates on which break input (0 or 1) the
+                configuration should be applied.
+              enum: [0, 1]
+            - description: |
+                "level" gives the active level (0=low or 1=high) of the
+                input signal for this configuration
+              enum: [0, 1]
+            - description: |
+                "filter" gives the filtering value (up to 15) to be applied.
+              maximum: 15
+        minItems: 1
+        maxItems: 2
+
+    required:
+      - "#pwm-cells"
+      - compatible
+
+  counter:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-timer-counter
+
+    required:
+      - compatible
+
+patternProperties:
+  "^timer@[0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32-timer-trigger
+          - st,stm32h7-timer-trigger
+
+      reg:
+        description: Identify trigger hardware block.
+        items:
+          minimum: 0
+          maximum: 16
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    timers2: timer@40000000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "st,stm32-timers";
+      reg = <0x40000000 0x400>;
+      clocks = <&rcc TIM2_K>;
+      clock-names = "int";
+      dmas = <&dmamux1 18 0x400 0x1>,
+             <&dmamux1 19 0x400 0x1>,
+             <&dmamux1 20 0x400 0x1>,
+             <&dmamux1 21 0x400 0x1>,
+             <&dmamux1 22 0x400 0x1>;
+      dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+      pwm {
+        compatible = "st,stm32-pwm";
+        #pwm-cells = <3>;
+        st,breakinput = <0 1 5>;
+      };
+      timer@1 {
+        compatible = "st,stm32-timer-trigger";
+        reg = <1>;
+      };
+      counter {
+        compatible = "st,stm32-timer-counter";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
new file mode 100644
index 0000000000..76551c90b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Multi-Function eXpander (STMFX)
+
+description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+               communication with the main MCU. Its main features are GPIO expansion,
+               main MCU IDD measurement (IDD is the amount of current that flows
+               through VDD) and resistive touchscreen controller.
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stmfx-0300
+
+  reg:
+    enum: [ 0x42, 0x43 ]
+
+  interrupts:
+    maxItems: 1
+
+  drive-open-drain: true
+
+  vdd-supply: true
+
+  pinctrl:
+    type: object
+
+    properties:
+      compatible:
+        const: st,stmfx-0300-pinctrl
+
+      "#gpio-cells":
+        const: 2
+
+      "#interrupt-cells":
+        const: 2
+
+      gpio-controller: true
+
+      interrupt-controller: true
+
+      gpio-ranges:
+        description: if all STMFX pins[24:0] are available (no other STMFX function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+                     if agpio[3:0] are not available (STMFX Touchscreen function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+                     if agpio[7:4] are not available (STMFX IDD function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+        maxItems: 1
+
+    patternProperties:
+      "^[a-zA-Z]*-pins$":
+        type: object
+        additionalProperties: false
+
+        allOf:
+          - $ref: ../pinctrl/pinmux-node.yaml
+
+        properties:
+          pins: true
+          bias-disable: true
+          bias-pull-up: true
+          bias-pull-pin-default: true
+          bias-pull-down: true
+          drive-open-drain: true
+          drive-push-pull: true
+          output-high: true
+          output-low: true
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - "#gpio-cells"
+      - "#interrupt-cells"
+      - gpio-controller
+      - interrupt-controller
+      - gpio-ranges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      stmfx@42 {
+        compatible = "st,stmfx-0300";
+        reg = <0x42>;
+        interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+        interrupt-parent = <&gpioi>;
+        vdd-supply = <&v3v3>;
+
+        stmfx_pinctrl: pinctrl {
+          compatible = "st,stmfx-0300-pinctrl";
+          #gpio-cells = <2>;
+          #interrupt-cells = <2>;
+          gpio-controller;
+          interrupt-controller;
+          gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+          joystick_pins: joystick-pins {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+            drive-push-pull;
+            bias-pull-up;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
new file mode 100644
index 0000000000..b77cc3f307
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml
@@ -0,0 +1,297 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE)
+
+description: STMicroelectronics Port Expander (STMPE) is a series of slow
+  bus controllers for various expanded peripherals such as GPIO, keypad,
+  touchscreen, ADC, PWM or rotator. It can contain one or several different
+  peripherals connected to SPI or I2C.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stmpe601
+      - st,stmpe801
+      - st,stmpe811
+      - st,stmpe1600
+      - st,stmpe1601
+      - st,stmpe2401
+      - st,stmpe2403
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply: true
+
+  vio-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  st,autosleep-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ]
+    description: Time idle before going to automatic sleep to save power
+
+  st,sample-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3, 4, 5, 6 ]
+    description: |
+      Sample time per iteration
+      0 = 36 clock ticks
+      1 = 44 clock ticks
+      2 = 56 clock ticks
+      3 = 64 clock ticks
+      4 = 80 clock ticks - recommended
+      5 = 96 clock ticks
+      6 = 124 clock ticks
+
+  st,mod-12b:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC
+
+  st,ref-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description: ADC reference source 0 = internal, 1 = external
+
+  st,adc-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    description: |
+      ADC clock speed
+      0 = 1.625 MHz
+      1 = 3.25 MHz
+      2, 3 = 6.5 MHz
+
+  adc:
+    type: object
+    $ref: /schemas/iio/adc/st,stmpe-adc.yaml#
+
+  gpio:
+    type: object
+    $ref: /schemas/gpio/st,stmpe-gpio.yaml#
+
+  keyboard-controller:
+    type: object
+    $ref: /schemas/input/matrix-keymap.yaml#
+
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: st,stmpe-keypad
+
+      debounce-interval:
+        description: Debouncing interval in milliseconds
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      st,no-autorepeat:
+        description: If present, the keys will not autorepeat when pressed
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,scan-count:
+        description: Scanning cycles elapsed before key data is updated
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - compatible
+      - linux,keymap
+
+  pwm:
+    type: object
+    $ref: /schemas/pwm/pwm.yaml#
+
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: st,stmpe-pwm
+
+      "#pwm-cells":
+        const: 2
+
+  touchscreen:
+    type: object
+    $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: st,stmpe-ts
+
+      st,ave-ctrl:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3 ]
+        description: |
+          Sample average control
+          0 = 1 sample
+          1 = 2 samples
+          2 = 4 samples
+          3 = 8 samples
+
+      st,touch-det-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+        description: |
+          Touch detection delay
+          0 = 10 us
+          1 = 50 us
+          2 = 100 us
+          3 = 500 us - recommended
+          4 = 1 ms
+          5 = 5 ms
+          6 = 10 ms
+          7 = 50 ms
+
+      st,settling:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+        description: |
+          Panel driver settling time
+          0 = 10 us
+          1 = 100 us
+          2 = 500 us - recommended
+          3 = 1 ms
+          4 = 5 ms
+          5 = 10 ms
+          6 = 50 ms
+          7 = 100 ms
+
+      st,fraction-z:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+        description: Length of the fractional part in z, recommended is 7
+          (fraction-z ([0..7]) = Count of the fractional part)
+
+      st,i-drive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        description: |
+          current limit value of the touchscreen drivers
+          0 = 20 mA (typical 35 mA max)
+          1 = 50 mA (typical 80 mA max)
+
+    required:
+      - compatible
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      port-expander@43 {
+        compatible = "st,stmpe2401";
+        reg = <0x43>;
+        reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+        vcc-supply = <&db8500_vsmps2_reg>;
+        vio-supply = <&db8500_vsmps2_reg>;
+        wakeup-source;
+        st,autosleep-timeout = <1024>;
+
+        gpio {
+          compatible = "st,stmpe-gpio";
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          st,norequest-mask = <0xf0f002>;
+        };
+
+        keyboard-controller {
+          compatible = "st,stmpe-keypad";
+          debounce-interval = <64>;
+          st,scan-count = <8>;
+          st,no-autorepeat;
+          keypad,num-rows = <8>;
+          keypad,num-columns = <8>;
+          linux,keymap = <
+              MATRIX_KEY(0x00, 0x00, KEY_1)
+              MATRIX_KEY(0x00, 0x01, KEY_2)
+              MATRIX_KEY(0x00, 0x02, KEY_3)
+              MATRIX_KEY(0x00, 0x03, KEY_4)
+              MATRIX_KEY(0x00, 0x04, KEY_5)
+              MATRIX_KEY(0x00, 0x05, KEY_6)
+              MATRIX_KEY(0x00, 0x06, KEY_7)
+              MATRIX_KEY(0x00, 0x07, KEY_8)
+              MATRIX_KEY(0x00, 0x08, KEY_9)
+              MATRIX_KEY(0x00, 0x09, KEY_0)
+          >;
+        };
+
+        pwm {
+          compatible = "st,stmpe-pwm";
+          #pwm-cells = <2>;
+        };
+      };
+
+      port-expander@41 {
+        compatible = "st,stmpe811";
+        reg = <0x41>;
+        interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-parent = <&gpio>;
+        st,adc-freq = <1>;
+        st,mod-12b = <1>;
+        st,ref-sel = <0>;
+        st,sample-time = <4>;
+
+        adc {
+          compatible = "st,stmpe-adc";
+          st,norequest-mask = <0x0f>;
+          #io-channel-cells = <1>;
+        };
+
+        gpio {
+          compatible = "st,stmpe-gpio";
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+        };
+
+        pwm {
+          compatible = "st,stmpe-pwm";
+          #pwm-cells = <2>;
+        };
+
+        touchscreen {
+          compatible = "st,stmpe-ts";
+          st,ave-ctrl = <3>;
+          st,touch-det-delay = <5>;
+          st,settling = <3>;
+          st,fraction-z = <7>;
+          st,i-drive = <1>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
new file mode 100644
index 0000000000..b17ebeb0a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -0,0 +1,340 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics STPMIC1 Power Management IC
+
+description: STMicroelectronics STPMIC1 Power Management IC
+
+maintainers:
+  - pascal Paillet <p.paillet@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stpmic1
+
+  reg:
+    const: 0x33
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  onkey:
+    type: object
+
+    $ref: ../input/input.yaml
+
+    properties:
+      compatible:
+        const: st,stpmic1-onkey
+
+      interrupts:
+        items:
+          - description: onkey-falling, happens when onkey is pressed. IT_PONKEY_F of pmic
+          - description: onkey-rising, happens when onkey is released. IT_PONKEY_R of pmic
+
+      interrupt-names:
+        items:
+          - const: onkey-falling
+          - const: onkey-rising
+
+      st,onkey-clear-cc-flag:
+        description: onkey is able power on after an over-current shutdown event.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      st,onkey-pu-inactive:
+        description: onkey pull up is not active
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      power-off-time-sec:
+        minimum: 1
+        maximum: 16
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  watchdog:
+    type: object
+
+    $ref: ../watchdog/watchdog.yaml
+
+    properties:
+      compatible:
+        const: st,stpmic1-wdt
+
+      timeout-sec: true
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulators:
+    type: object
+
+    description: |
+      Available Regulators in STPMIC1 device are:
+        - buck1 for Buck BUCK1
+        - buck2 for Buck BUCK2
+        - buck3 for Buck BUCK3
+        - buck4 for Buck BUCK4
+        - ldo1 for LDO LDO1
+        - ldo2 for LDO LDO2
+        - ldo3 for LDO LDO3
+        - ldo4 for LDO LDO4
+        - ldo5 for LDO LDO5
+        - ldo6 for LDO LDO6
+        - vref_ddr for LDO Vref DDR
+        - boost for Buck BOOST
+        - pwr_sw1 for VBUS_OTG switch
+        - pwr_sw2 for SW_OUT switch
+      Switches are fixed voltage regulators with only enable/disable capability.
+
+    properties:
+      compatible:
+        const: st,stpmic1-regulators
+
+      ldo3:
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-allow-bypass: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+      ldo4:
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+      vref_ddr:
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+
+        additionalProperties: false
+
+      boost:
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+
+        additionalProperties: false
+
+    patternProperties:
+      "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$":
+        description: STPMIC1 voltage regulators supplies
+
+      "^ldo[1-2,5-6]$":
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-over-current-protection: true
+          regulator-enable-ramp-delay: true
+
+        additionalProperties: false
+
+      "^buck[1-4]$":
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          st,mask-reset:
+            description: mask reset for this regulator, the regulator configuration
+              is maintained during pmic reset.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          regulator-initial-mode: true
+          regulator-pull-down: true
+          regulator-over-current-protection: true
+          regulator-enable-ramp-delay: true
+
+        additionalProperties: false
+
+      "^pwr_sw[1-2]$":
+        $ref: /schemas/regulator/regulator.yaml
+        type: object
+
+        properties:
+          interrupts:
+            maxItems: 1
+
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-over-current-protection: true
+          regulator-active-discharge: true
+
+        additionalProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/mfd/st,stpmic1.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@33 {
+        compatible = "st,stpmic1";
+        reg = <0x33>;
+        interrupt-parent = <&gpioa>;
+        interrupts = <0 2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        onkey {
+          compatible = "st,stpmic1-onkey";
+          interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+          interrupt-names = "onkey-falling", "onkey-rising";
+          power-off-time-sec = <10>;
+        };
+
+        watchdog {
+          compatible = "st,stpmic1-wdt";
+        };
+
+        regulators {
+          compatible = "st,stpmic1-regulators";
+
+          ldo6-supply = <&v3v3>;
+
+          buck1 {
+            regulator-name = "vdd_core";
+            interrupts = <IT_CURLIM_BUCK1 0>;
+            st,mask-reset;
+            regulator-boot-on;
+            regulator-min-microvolt = <700000>;
+            regulator-max-microvolt = <1200000>;
+          };
+
+          buck3 {
+            regulator-name = "vdd";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-boot-on;
+            regulator-pull-down;
+          };
+
+          buck4 {
+            regulator-name = "v3v3";
+            interrupts = <IT_CURLIM_BUCK4 0>;
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          ldo6 {
+            regulator-name = "v1v8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-over-current-protection;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
new file mode 100644
index 0000000000..94f9767a92
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -0,0 +1,522 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Analog Baseband AB8500 and AB8505
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
+  handling power management (regulators), analog-to-digital conversion
+  (ADC), battery charging, fuel gauging of the battery, battery-backed
+  RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
+  in connection with the DB8500 digital baseband. The DB8500 PRCMU
+  communicates directly and autonomously with the AB8500 and thus it
+  appears as a subnode of the DB8500 PRCMU. An altered version called
+  AB8505 also exist, the difference in AB8505 is that some of the USB and
+  USB charging handling has changed, and it has an embedded USB-to-serial
+  converter. Most subblocks takes their interrupts directly from the
+  AB8500 embedded interrupt controller.
+
+properties:
+  $nodename:
+    pattern: '^ab850[05]$'
+
+  compatible:
+    enum:
+      - stericsson,ab8500
+      - stericsson,ab8505
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  # Some subnodes use a reg, some don't. Those that do use a single cell.
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clock-controller:
+    description: Node describing the AB8500 clock controller. This
+      provides the reference clock for the entire U8500 system and
+      the DB8500 counterpart.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-clk
+
+      '#clock-cells':
+        const: 1
+
+  gpio:
+    description: Node describing the AB8500 GPIO controller. A few
+      GPIO pins available for misc usage.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-gpio
+          - stericsson,ab8505-gpio
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+  rtc:
+    description: Node describing the AB8500 battery-backed RTC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-rtc
+
+      interrupts:
+        items:
+          - description: 60 second interval alarm interrupt
+          - description: RTC alarm
+
+      interrupt-names:
+        items:
+          - const: 60S
+          - const: ALARM
+
+  adc:
+    description: Node describing the AB8500 general purpose analog to digital
+      converter, GPADC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-gpadc
+
+      # AB8505 only supports one (software) EOC interrupt
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      interrupt-names: true
+
+      vddadc-supply: true
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#io-channel-cells':
+        const: 1
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        $ref: ../iio/adc/adc.yaml#
+        description: Represents each of the external channels which are
+          connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 1
+              maximum: 31
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddadc-supply
+      - '#address-cells'
+      - '#size-cells'
+      - '#io-channel-cells'
+
+    additionalProperties: false
+
+  thermal:
+    description: Node describing the AB8500 thermal control block. All this block
+      really does is to fire an interrupt when the die becomes 130 degrees Celsius
+      in temperature.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,abx500-temp
+
+      interrupts:
+        items:
+          - description: Thermal warm warning interrupt
+
+      interrupt-names:
+        items:
+          - const: ABX500_TEMP_WARM
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500_fg:
+    description: Node describing the AB8500 fuel gauge control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+
+  ab8500_btemp:
+    description: Node describing the AB8500 battery temperature control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+
+  ab8500_charger:
+    description: Node describing the AB8500 battery charger control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+
+  ab8500_chargalg:
+    description: Node describing the AB8500 battery charger algorithm.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+
+  phy:
+    description: Node describing the AB8500 USB PHY control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-usb
+
+      interrupts:
+        items:
+          - description: ID wakeup rising IRQ
+          - description: ID wakeup falling IRQ
+          - description: VBUS detection falling IRQ
+          - description: VBUS detection rising IRQ
+          - description: USB link status change IRQ
+          - description: ADP probe plug IRQ
+          - description: ADP probe unplug IRQ
+
+      interrupt-names:
+        items:
+          - const: ID_WAKEUP_R
+          - const: ID_WAKEUP_F
+          - const: VBUS_DET_F
+          - const: VBUS_DET_R
+          - const: USB_LINK_STATUS
+          - const: USB_ADP_PROBE_PLUG
+          - const: USB_ADP_PROBE_UNPLUG
+
+      vddulpivio18-supply: true
+      v-ape-supply: true
+      musb_1v8-supply: true
+
+      clocks:
+        items:
+          - description: PRCMY system clock
+
+      clock-names:
+        items:
+          - const: sysclk
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddulpivio18-supply
+      - v-ape-supply
+      - musb_1v8-supply
+      - clocks
+      - clock-names
+      - '#phy-cells'
+
+    additionalProperties: false
+
+  key:
+    description: Node describing the AB8500 power-on key control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-poweron-key
+
+      interrupts:
+        items:
+          - description: ON key falling IRQ
+          - description: ON key rising IRQ
+
+      interrupt-names:
+        items:
+          - const: ONKEY_DBF
+          - const: ONKEY_DBR
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500-sysctrl:
+    description: Node describing the AB8500 system control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-sysctrl
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  codec:
+    description: Node describing the AB8500 audio codec block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-codec
+
+      V-AUD-supply: true
+      V-AMIC1-supply: true
+      V-AMIC2-supply: true
+      V-DMIC-supply: true
+
+      clocks:
+        items:
+          - description: Audio system clock
+
+      clock-names:
+        items:
+          - const: audioclk
+
+      stericsson,earpeice-cmv:
+        description: Earpiece voltage
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 950, 1100, 1270, 1580 ]
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulator:
+    description: Node describing the AB8500 internal regulators.
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-regulator
+          - stericsson,ab8505-regulator
+
+      vin-supply:
+        description: The regulator supplying all of the internal regulators
+          with power.
+
+      ab8500_ldo_aux1:
+        description: The voltage for the auxiliary LDO regulator 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux2:
+        description: The voltage for the auxiliary LDO regulator 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux3:
+        description: The voltage for the auxiliary LDO regulator 3
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux4:
+        description: The voltage for the auxiliary LDO regulator 4
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux5:
+        description: The voltage for the auxiliary LDO regulator 5
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux6:
+        description: The voltage for the auxiliary LDO regulator 6
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      # There is never any AUX7 regulator which is confusing
+
+      ab8500_ldo_aux8:
+        description: The voltage for the auxiliary LDO regulator 8
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_intcore:
+        description: The LDO regulator for the internal core voltage
+          of the AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_adc:
+        description: Analog power regulator for the analog to digital converter
+          ADC, only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_tvout:
+        description: The voltage for the TV output regulator, incidentally
+          this voltage is also used for other purposes such as measuring
+          the temperature of the NTC thermistor on the battery.
+          Only present on AB8500.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_audio:
+        description: The LDO regulator for the audio codec output
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic1:
+        description: The LDO regulator for the analog microphone 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic2:
+        description: The LDO regulator for the analog microphone 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_dmic:
+        description: The LDO regulator for the digital microphone
+          only present on AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_ana:
+        description: Analog power regulator for CSI and DSI interfaces,
+          Camera Serial Interface CSI and Display Serial Interface DSI.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+
+  regulator-external:
+    description: Node describing the AB8500 external regulators. This
+      concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
+      that are normally controlled by external electronics but also
+      sometimes need to be explicitly controlled by software.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-ext-regulator
+
+      ab8500_ext1:
+        description: The voltage for the VSMPS1 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext2:
+        description: The voltage for the VSMPS2 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext3:
+        description: The voltage for the VSMPS3 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^pwm@[1-9]+?$":
+    type: object
+    $ref: ../pwm/pwm.yaml#
+    unevaluatedProperties: false
+    description: Represents each of the PWM blocks in the AB8500
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-pwm
+
+      reg: true
+
+      clocks:
+        items:
+          - description: internal clock
+
+      clock-names:
+        items:
+          - const: intclk
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - clock-controller
+  - gpio
+  - rtc
+  - adc
+  - thermal
+  - ab8500_fg
+  - ab8500_btemp
+  - ab8500_charger
+  - ab8500_chargalg
+  - phy
+  - key
+  - regulator
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
new file mode 100644
index 0000000000..5e0002f099
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,db8500-prcmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The DB8500 Power Reset and Control Management Unit is an XP70 8-bit
+  microprocessor that is embedded in the always-on power domain of the
+  DB8500 SoCs to manage the low power states, powering up and down parts
+  of the silicon, and controlling reset of different IP blocks.
+
+properties:
+  $nodename:
+    pattern: '^prcmu@[0-9a-f]+$'
+
+  compatible:
+    description: The device is compatible both to the device-specific
+      compatible "stericsson,db8500-prcmu" and "syscon". The latter
+      compatible is needed for the device to be exposed as a system
+      controller so that arbitrary registers can be access by
+      different operating system components.
+    items:
+      - const: stericsson,db8500-prcmu
+      - const: syscon
+
+  reg:
+    items:
+      - description: Main PRCMU register area
+      - description: PRCMU TCPM register area
+      - description: PRCMU TCDM register area
+
+  reg-names:
+    items:
+      - const: prcmu
+      - const: prcmu-tcpm
+      - const: prcmu-tcdm
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  db8500-prcmu-regulators:
+    description: Node describing the DB8500 regulators. These are mainly
+      power rails inside the silicon but some of those are also routed
+      out to external pins.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,db8500-prcmu-regulator
+
+      db8500_vape:
+        description: The voltage for the application processor, the
+          main voltage domain for the chip.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_varm:
+        description: The voltage for the ARM Cortex A-9 CPU.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_vmodem:
+        description: The voltage for the modem subsystem.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_vpll:
+        description: The voltage for the phase locked loop clocks.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_vsmps1:
+        description: Also known as VIO12, is a step-down voltage regulator
+          for 1.2V I/O. SMPS means System Management Power Source.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_vsmps2:
+        description: Also known as VIO18, is a step-down voltage regulator
+          for 1.8V I/O. SMPS means System Management Power Source.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_vsmps3:
+        description: This is a step-down voltage regulator
+          for 0.87 thru 1.875V I/O. SMPS means System Management Power Source.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_vrf1:
+        description: RF transceiver voltage regulator.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sva_mmdsp:
+        description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
+          voltage regulator. This is the voltage for the accelerator DSP
+          for video encoding and decoding.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sva_mmdsp_ret:
+        description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
+          voltage regulator for retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sva_pipe:
+        description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP)
+          voltage regulator for the data pipe.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sia_mmdsp:
+        description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
+          voltage regulator. This is the voltage for the accelerator DSP
+          for image encoding and decoding.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sia_mmdsp_ret:
+        description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
+          voltage regulator for retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sia_pipe:
+        description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP)
+          voltage regulator for the data pipe.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_sga:
+        description: Smart Graphics Accelerator (SGA) voltage regulator.
+          This is in effect controlling the power to the MALI400 3D
+          accelerator block.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_b2r2_mcde:
+        description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel
+          Display Engine (MCDE) voltage regulator. These are two graphics
+          blocks.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_esram12:
+        description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_esram12_ret:
+        description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for
+          retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_esram34:
+        description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      db8500_esram34_ret:
+        description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for
+          retention mode.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+      - db8500_vape
+      - db8500_varm
+      - db8500_vmodem
+      - db8500_vpll
+      - db8500_vsmps1
+      - db8500_vsmps2
+      - db8500_vsmps3
+      - db8500_vrf1
+      - db8500_sva_mmdsp
+      - db8500_sva_mmdsp_ret
+      - db8500_sva_pipe
+      - db8500_sia_mmdsp
+      - db8500_sia_mmdsp_ret
+      - db8500_sia_pipe
+      - db8500_sga
+      - db8500_b2r2_mcde
+      - db8500_esram12
+      - db8500_esram12_ret
+      - db8500_esram34
+      - db8500_esram34_ret
+
+    additionalProperties: false
+
+patternProperties:
+  "^thermal@[0-9a-f]+$":
+    description: Node describing the DB8500 thermal control functions.
+      This binds to an operating system driver that monitors the
+      temperature of the SoC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,db8500-thermal
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        items:
+          - description: Hotmon low interrupt (falling temperature)
+          - description: Hotmon high interrupt (rising temperature)
+
+      interrupt-names:
+        items:
+          - const: IRQ_HOTMON_LOW
+          - const: IRQ_HOTMON_HIGH
+
+      '#thermal-sensor-cells':
+        const: 0
+
+    additionalProperties: false
+
+  "^prcmu-timer-4@[0-9a-f]+$":
+    description: Node describing the externally visible timer 4 in the
+      PRCMU block. This timer is interesting to the operating system
+      since even thought it has a very low resolution (32768 Hz) it is
+      always on, and thus provides a consistent monotonic timeline for
+      the system.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,db8500-prcmu-timer-4
+
+      reg:
+        maxItems: 1
+
+    additionalProperties: false
+
+  "^ab850[05]$":
+    description: Node describing the Analog Baseband 8500 mixed-signals
+      ASIC AB8500 and subcomponents. The AB8500 is accessed through the
+      PRCMU and hence it appears here. This component has a separate
+      set of devicetree bindings. The AB8505 is a newer version of the
+      same ASIC.
+    type: object
+    $ref: stericsson,ab8500.yaml#
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - db8500-prcmu-regulators
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
new file mode 100644
index 0000000000..8103154bbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Controller Registers R/W
+
+description: |
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. The typical use-case is
+  for some other node's driver, or platform-specific code, to acquire
+  a reference to the syscon node (e.g. by phandle, node path, or
+  search using a specific compatible value), interrogate the node (or
+  associated OS driver) to determine the location of the registers,
+  and access the registers directly.
+
+maintainers:
+  - Lee Jones <lee@kernel.org>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - syscon
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    anyOf:
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-system-controller
+              - allwinner,sun8i-h3-system-controller
+              - allwinner,sun8i-v3s-system-controller
+              - allwinner,sun50i-a64-system-controller
+              - amd,pensando-elba-syscon
+              - brcm,cru-clkset
+              - freecom,fsg-cs2-system-controller
+              - fsl,imx93-aonmix-ns-syscfg
+              - fsl,imx93-wakeupmix-syscfg
+              - hisilicon,dsa-subctrl
+              - hisilicon,hi6220-sramctrl
+              - hisilicon,pcie-sas-subctrl
+              - hisilicon,peri-subctrl
+              - hpe,gxp-sysreg
+              - intel,lgm-syscon
+              - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt8135-pctl-a-syscfg
+              - mediatek,mt8135-pctl-b-syscfg
+              - mediatek,mt8365-syscfg
+              - microchip,lan966x-cpu-syscon
+              - microchip,sparx5-cpu-syscon
+              - mstar,msc313-pmsleep
+              - nuvoton,ma35d1-sys
+              - nuvoton,wpcm450-shm
+              - rockchip,px30-qos
+              - rockchip,rk3036-qos
+              - rockchip,rk3066-qos
+              - rockchip,rk3228-qos
+              - rockchip,rk3288-qos
+              - rockchip,rk3368-qos
+              - rockchip,rk3399-qos
+              - rockchip,rk3568-qos
+              - rockchip,rk3588-qos
+              - rockchip,rv1126-qos
+              - starfive,jh7100-sysmain
+
+          - const: syscon
+
+      - contains:
+          const: syscon
+        minItems: 2
+        maxItems: 5  # Should be enough
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    description: |
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [1, 2, 4, 8]
+
+  resets:
+    maxItems: 1
+
+  hwlocks:
+    maxItems: 1
+    description:
+      Reference to a phandle of a hardware spinlock provider node.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
+additionalProperties: true
+
+examples:
+  - |
+    syscon: syscon@1c00000 {
+        compatible = "allwinner,sun8i-h3-system-controller", "syscon";
+        reg = <0x01c00000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
new file mode 100644
index 0000000000..4f22b2b07d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+   TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+  (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+   TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+   flags are valid:
+   - IRQ_TYPE_LEVEL_LOW
+   - IRQ_TYPE_LEVEL_HIGH
+   - IRQ_TYPE_EDGE_RISING
+   - IRQ_TYPE_EDGE_FALLING
+   - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+   GPIO controller, the second cell is the flags.
+
+- Keypad
+  This keypad is the same on all variants, supporting up to 96 different
+  keys. The linux-specific properties are modeled on those already existing
+  in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+   bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - wakeup-source: use any event on keypad as wakeup event.
+		  (Legacy property supported: "linux,wakeup")
+
+Example:
+
+tc35893@44 {
+	compatible = "toshiba,tc35893";
+	reg = <0x44>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	tc3589x_gpio {
+		compatible = "toshiba,tc3589x-gpio";
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tc3589x_keypad {
+		compatible = "toshiba,tc3589x-keypad";
+		interrupts = <6>;
+		debounce-delay-ms = <4>;
+		keypad,num-columns = <8>;
+		keypad,num-rows = <8>;
+		linux,no-autorepeat;
+		linux,keymap = <0x0301006b
+				0x04010066
+				0x06040072
+				0x040200d7
+				0x0303006a
+				0x0205000e
+				0x0607008b
+				0x0500001c
+				0x0403000b
+				0x03040034
+				0x05020067
+				0x0305006c
+				0x040500e7
+				0x0005009e
+				0x06020073
+				0x01030039
+				0x07060069
+				0x050500d9>;
+		wakeup-source;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
new file mode 100644
index 0000000000..23a63265be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,am3359-tscadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller/ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3359-tscadc
+      - items:
+          - const: ti,am654-tscadc
+          - const: ti,am3359-tscadc
+      - const: ti,am4372-magadc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for FIFO0
+      - description: DMA controller phandle and request line for FIFO1
+
+  dma-names:
+    items:
+      - const: fifo0
+      - const: fifo1
+
+  adc:
+    type: object
+    description: ADC child
+
+  tsc:
+    type: object
+    description: Touchscreen controller child
+
+  mag:
+    type: object
+    description: Magnetic reader
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tscadc@0 {
+        compatible = "ti,am3359-tscadc";
+        reg = <0x0 0x1000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&adc_tsc_fck>;
+        clock-names = "fck";
+        dmas = <&edma 53 0>, <&edma 57 0>;
+        dma-names = "fifo0", "fifo1";
+
+        tsc {
+        };
+
+        adc {
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
new file mode 100644
index 0000000000..e6289fbe69
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721e System Controller Registers R/W
+
+description: |
+  This represents the Control Module registers (CTRL_MMR0) on the SoC.
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. The typical use-case is
+  for some other node's driver, or platform-specific code, to acquire
+  a reference to the syscon node (e.g. by phandle, node path, or
+  search using a specific compatible value), interrogate the node (or
+  associated OS driver) to determine the location of the registers,
+  and access the registers directly.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,j7200-system-controller
+          - ti,j721e-system-controller
+          - ti,j721s2-system-controller
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  # Optional children
+  "^mux-controller@[0-9a-f]+$":
+    type: object
+    description:
+      This is the SERDES lane control mux.
+
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    description:
+      Clock provider for TI EHRPWM nodes.
+
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/ti,phy-gmii-sel.yaml#
+    description:
+      The phy node corresponding to the ethernet MAC.
+
+  "^chipid@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/hwinfo/ti,k3-socinfo.yaml#
+    description:
+      The node corresponding to SoC chip identification.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    scm_conf: scm-conf@100000 {
+        compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+        reg = <0x00100000 0x1c000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        serdes_ln_ctrl: mux-controller@4080 {
+            compatible = "mmio-mux";
+            reg = <0x00004080 0x50>;
+
+            #mux-control-cells = <1>;
+            mux-reg-masks =
+                <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+                <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+                <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+                <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+                <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+                /* SERDES4 lane0/1/2/3 select */
+        };
+
+        clock-controller@4140 {
+            compatible = "ti,am654-ehrpwm-tbclk";
+            reg = <0x4140 0x18>;
+            #clock-cells = <1>;
+        };
+
+        chipid@14 {
+            compatible = "ti,am654-chipid";
+            reg = <0x14 0x4>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
new file mode 100644
index 0000000000..f6cac4b107
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87524-Q1 four 1-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87524-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  reset-gpios:
+    description: GPIO connected to NRST pin (active low reset, pin 20)
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[0123]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck0
+      - buck1
+      - buck2
+      - buck3
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck[0123]-in-supply$":
+    description: Voltage regulator supply for each BUCK converter
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck0-in-supply
+  - buck1-in-supply
+  - buck2-in-supply
+  - buck3-in-supply
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87524-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck0-in-supply = <&vdd_5v0>;
+            buck1-in-supply = <&vdd_5v0>;
+            buck2-in-supply = <&vdd_5v0>;
+            buck3-in-supply = <&vdd_5v0>;
+
+            regulators {
+                buck0_reg: buck0 {
+                    regulator-name = "buck0";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                buck1_reg: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <950000>;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
new file mode 100644
index 0000000000..dc5a29b5ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87561-Q1 single 4-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,lp87561-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  reset-gpios:
+    description: GPIO connected to NRST pin (active low reset, pin 20)
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck3210-in-supply:
+    description:
+      Voltage regulator supply for all the four BUCK converters.
+
+  regulators:
+    type: object
+
+    properties:
+      buck3210:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck3210
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck3210-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87561-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck3210-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck3210_reg: buck3210 {
+                    /* VDD_CORE */
+                    regulator-name = "buck3210";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
new file mode 100644
index 0000000000..012d251110
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,lp87565
+      - ti,lp87565-q1
+
+  reg:
+    description: I2C slave address
+    const: 0x60
+
+  reset-gpios:
+    description: GPIO connected to NRST pin (active low reset, pin 20)
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number.
+      The second cell is is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+    const: 2
+
+  buck10-in-supply:
+    description:
+      Voltage regulator supply for BUCK0 and BUCK1 converters.
+
+  buck23-in-supply:
+    description:
+      Voltage regulator supply for BUCK2 and BUCK3 converters.
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck(10|23)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+    required:
+      - buck10
+      - buck23
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - buck10-in-supply
+  - buck23-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "ti,lp87565-q1";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck10-in-supply = <&vsys_3v3>;
+            buck23-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck10_reg: buck10 {
+                    /* VDD_MPU */
+                    regulator-name = "buck10";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck23_reg: buck23 {
+                    /* VDD_GPU */
+                    regulator-name = "buck23";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml
new file mode 100644
index 0000000000..28cd5164d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,nspire-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Nspire MISC hardware block
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description:
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. Currently there is a reset
+  controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,nspire-misc
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+
+required:
+  - compatible
+  - reg
+  - reboot
+
+additionalProperties: false
+
+examples:
+  - |
+    misc: misc@900a0000 {
+      compatible = "ti,nspire-misc", "syscon", "simple-mfd";
+      reg = <0x900a0000 0x1000>;
+
+      reboot {
+        compatible = "syscon-reboot";
+        offset = <0x08>;
+        value = <0x02>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
new file mode 100644
index 0000000000..bd36a07c17
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65086 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: ti,tps65086
+
+  reg:
+    const: 0x5e
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell is the IRQ number. The second cell is the flags,
+      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags.  See ../gpio/gpio.txt for more information.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts:
+      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          ti,regulator-step-size-25mv:
+            type: boolean
+            description: |
+              Set this if the regulator is factory set with a 25mv step voltage
+              mapping.
+          ti,regulator-decay:
+            type: boolean
+            description: |
+              Set this if the output needs to decay, default is for the output
+              to slew down.
+
+        additionalProperties: false
+
+      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+
+        additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@5e {
+            compatible = "ti,tps65086";
+            reg = <0x5e>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "vcc1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1600000>;
+                    regulator-boot-on;
+                    ti,regulator-decay;
+                    ti,regulator-step-size-25mv;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
new file mode 100644
index 0000000000..9d43376beb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS6594 Power Management Integrated Circuit
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description:
+  TPS6594 is a Power Management IC which provides regulators and others
+  features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
+  PFSM (Pre-configurable Finite State Machine) managing the state of the device.
+  TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8764-q1
+      - ti,tps6593-q1
+      - ti,tps6594-q1
+
+  reg:
+    description: I2C slave address or SPI chip select number.
+    maxItems: 1
+
+  ti,primary-pmic:
+    type: boolean
+    description: |
+      Identify the primary PMIC on SPMI bus.
+      A multi-PMIC synchronization scheme is implemented in the PMIC device
+      to synchronize the power state changes with other PMIC devices. This is
+      accomplished through a SPMI bus: the primary PMIC is the controller
+      device on the SPMI bus, and the secondary PMICs are the target devices
+      on the SPMI bus.
+
+  system-power-controller: true
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number, the second cell is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators provided by this controller.
+
+    patternProperties:
+      "^buck([1-5]|12|34|123|1234)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+      "^ldo[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+    allOf:
+      - if:
+          required:
+            - buck12
+        then:
+          properties:
+            buck123: false
+            buck1234: false
+      - if:
+          required:
+            - buck123
+        then:
+          properties:
+            buck34: false
+      - if:
+          required:
+            - buck1234
+        then:
+          properties:
+            buck34: false
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck([1-5]|12|34|123|1234)-supply$":
+    description: Input supply phandle for each buck.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle for each ldo.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps6593: pmic@48 {
+            compatible = "ti,tps6593-q1";
+            reg = <0x48>;
+            ti,primary-pmic;
+            system-power-controller;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_irq_pins_default>;
+            interrupt-parent = <&mcu_gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+            buck123-supply = <&vcc_3v3_sys>;
+            buck4-supply = <&vcc_3v3_sys>;
+            buck5-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&vcc_3v3_sys>;
+            ldo3-supply = <&buck5>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            regulators {
+                buck123: buck123 {
+                    regulator-name = "vcc_core";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck4: buck4 {
+                    regulator-name = "vcc_1v1";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck5: buck5 {
+                    regulator-name = "vcc_1v8_sys";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: ldo1 {
+                    regulator-name = "vddshv5_sdio";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo2: ldo2 {
+                    regulator-name = "vpp_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3: ldo3 {
+                    regulator-name = "vcc_0v85";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4: ldo4 {
+                    regulator-name = "vdda_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
new file mode 100644
index 0000000000..71a1f59639
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Texas Instruments keystone device state control
+
+The Keystone II devices have a set of registers that are used to control
+the status of its peripherals. This node is intended to allow access to
+this functionality.
+
+Required properties:
+
+- compatible:		"ti,keystone-devctrl", "syscon"
+
+- reg:			contains offset/length value for device state control
+			registers space.
+
+Example:
+
+devctrl: device-state-control@02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
new file mode 100644
index 0000000000..2296b8f24d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -0,0 +1,269 @@
+TI LMU (Lighting Management Unit) device tree bindings
+
+TI LMU driver supports lighting devices below.
+
+   Name                  Child nodes
+  ------      ---------------------------------
+  LM3631       Backlight and regulator
+  LM3632       Backlight and regulator
+  LM3633       Backlight, LED and fault monitor
+  LM3695       Backlight
+  LM36274      Backlight and regulator
+
+Required properties:
+  - compatible: Should be one of:
+                "ti,lm3631"
+                "ti,lm3632"
+                "ti,lm3633"
+                "ti,lm3695"
+		"ti,lm36274"
+  - reg: I2C slave address.
+         0x11 for LM3632
+         0x29 for LM3631
+         0x36 for LM3633
+         0x63 for LM3695
+         0x11 for LM36274
+
+Optional properties:
+  - enable-gpios: A GPIO specifier for hardware enable pin.
+  - ramp-up-us: Current ramping from one brightness level to
+		the a higher brightness level.
+		Range from 2048 us - 117.44 s
+  - ramp-down-us: Current ramping from one brightness level to
+		  the a lower brightness level.
+		  Range from 2048 us - 117.44 s
+  - ti,brightness-resolution - This determines whether to use 8 bit brightness
+			       mode or 11 bit brightness mode.  If this value is
+			       not set the device is defaulted to the preferred
+			       8bit brightness mode per 7.3.4.1 of the data
+			       sheet.  This setting can either be in the parent
+			       node or as part of the LED child nodes.  This
+			       is determined by the part itself if the strings
+			       have a common brightness register or individual
+			       brightness registers.
+			       The values are 255 (8bit) or 2047 (11bit).
+
+Required node:
+  - backlight: All LMU devices have backlight child nodes.
+               For the properties, please refer to [1].
+
+Optional nodes:
+  - fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697.
+    Required properties:
+      - compatible: Should be one of:
+                    "ti,lm3633-fault-monitor"
+  - leds: LED properties for LM3633. Please refer to [2].
+	  LED properties for LM36274. Please refer to [4].
+  - regulators: Regulator properties for LM3631 and LM3632.
+                Please refer to [3].
+
+[1] ../leds/backlight/ti-lmu-backlight.txt
+[2] ../leds/leds-lm3633.txt
+[3] ../regulator/lm363x-regulator.txt
+[4] ../leds/leds-lm36274.txt
+
+lm3631@29 {
+	compatible = "ti,lm3631";
+	reg = <0x29>;
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6350000>;
+			regulator-always-on;
+		};
+
+		vcont {
+			regulator-name = "lcd_vcont";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		voref {
+			regulator-name = "lcd_voref";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+	};
+
+	backlight {
+		compatible = "ti,lm3631-backlight";
+
+		lcd_bl {
+			led-sources = <0 1>;
+			ramp-up-us = <300000>;
+		};
+	};
+};
+
+lm3632@11 {
+	compatible = "ti,lm3632";
+	reg = <0x11>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; /* PC2 */
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+			       <&pioC 1 GPIO_ACTIVE_HIGH>;
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6400000>;
+			regulator-always-on;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+	};
+
+	backlight {
+		compatible = "ti,lm3632-backlight";
+
+		pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
+		pwm-names = "lmu-backlight";
+
+		lcd {
+			led-sources = <0 1>;
+			pwm-period = <10000>;
+		};
+	};
+};
+
+lm3633@36 {
+	compatible = "ti,lm3633";
+	reg = <0x36>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+	backlight {
+		compatible = "ti,lm3633-backlight";
+
+		main {
+			label = "main_lcd";
+			led-sources = <1 2>;
+			ramp-up-us = <500000>;
+			ramp-down-us = <500000>;
+		};
+
+		front {
+			label = "front_lcd";
+			led-sources = <0>;
+			ramp-up-us = <1000000>;
+			ramp-down-us = <0>;
+		};
+	};
+
+	leds {
+		compatible = "ti,lm3633-leds";
+
+		chan1 {
+			label = "status";
+			led-sources = <1>;
+			led-max-microamp = <6000>;
+		};
+
+		chan345 {
+			label = "rgb";
+			led-sources = <3 4 5>;
+			led-max-microamp = <10000>;
+		};
+	};
+
+	fault-monitor {
+		compatible = "ti,lm3633-fault-monitor";
+	};
+};
+
+lm3695@63 {
+	compatible = "ti,lm3695";
+	reg = <0x63>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+	backlight {
+		compatible = "ti,lm3695-backlight";
+
+		lcd {
+			label = "bl";
+			led-sources = <0 1>;
+		};
+	};
+};
+
+lm36274@11 {
+	compatible = "ti,lm36274";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x11>;
+
+	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,lm363x-regulator";
+
+		enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+			       <&pioC 1 GPIO_ACTIVE_HIGH>;
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <7150000>;
+			regulator-always-on;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6500000>;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6500000>;
+		};
+	};
+
+	backlight {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,lm36274-backlight";
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 2>;
+			label = "white:backlight_cluster";
+			linux,default-trigger = "backlight";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt
new file mode 100644
index 0000000000..dc448a9d5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt
@@ -0,0 +1,62 @@
+* Device tree bindings for TI TPS61050/61052 Boost Converters
+
+The TP61050/TPS61052 is a high-power "white LED driver". The
+device provides LED, GPIO and regulator functionalities.
+
+Required properties:
+- compatible:		"ti,tps61050" or "ti,tps61052"
+- reg:			Specifies the I2C slave address
+
+Optional sub-node:
+
+This subnode selects the chip's operational mode.
+There can be at most one single available subnode.
+
+- regulator: presence of this sub-node puts the chip in regulator mode.
+	see ../regulator/regulator.yaml
+
+- led: presence of this sub-node puts the chip in led mode.
+	Optional properties:
+	- function : see ../leds/common.txt
+	- color    : see ../leds/common.txt
+	- label    : see ../leds/common.txt
+			(deprecated)
+
+Example (GPIO operation only):
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+	};
+};
+
+Example (GPIO + regulator operation):
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+
+		regulator {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+Example (GPIO + led operation):
+
+#include <dt-bindings/leds/common.h>
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt
new file mode 100644
index 0000000000..8fffa3c5ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt
@@ -0,0 +1,91 @@
+TPS6507x Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps6507x"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the
+  given device need to be present. The definition for each of these nodes
+  is defined using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  The regulator is matched with the regulator-compatible.
+
+  The valid regulator-compatible values are:
+  tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
+- xxx-supply: Input voltage supply regulator.
+  These entries are required if regulators are enabled for a device.
+  Missing of these properties can cause the regulator registration
+  fails.
+  If some of input supply is powered through battery or always-on
+  supply then also it is require to have these parameters with proper
+  node handle of always on power supply.
+  tps6507x:
+       vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
+       vindcdc3-supply  : VDCDC3 input.
+       vldo1_2-supply   : VLDO1 and VLDO2 input.
+
+Regulator Optional properties:
+- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
+			0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
+			1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
+  If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+	pmu: tps6507x@48 {
+		compatible = "ti,tps6507x";
+		reg = <0x48>;
+
+		vindcdc1_2-supply = <&vbat>;
+		vindcdc3-supply = <...>;
+		vinldo1_2-supply = <...>;
+
+		regulators {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdcdc1_reg: regulator@0 {
+				regulator-compatible = "VDCDC1";
+				reg = <0>;
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			vdcdc2_reg: regulator@1 {
+				regulator-compatible = "VDCDC2";
+				reg = <1>;
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				defdcdc_default = <1>;
+			};
+			vdcdc3_reg: regulator@2 {
+				regulator-compatible = "VDCDC3";
+				reg = <2>;
+				regulator-min-microvolt = <950000>
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				defdcdc_default = <1>;
+			};
+			ldo1_reg: regulator@3 {
+				regulator-compatible = "LDO1";
+				reg = <3>;
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo2_reg: regulator@4 {
+				regulator-compatible = "LDO2";
+				reg = <4>;
+				regulator-min-microvolt = <1140000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+	};
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
new file mode 100644
index 0000000000..a5ced46bbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -0,0 +1,205 @@
+TPS65910 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps65910" or "ti,tps65911"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO, this should be 2.
+  The first cell is the GPIO number.
+  The second cell is used to specify additional options <unused>.
+- gpio-controller: mark the device as a GPIO controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+  The first cell is the IRQ number.
+  The second cell is the flags, encoded as the trigger masks from
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  The regulator is matched with the regulator-compatible.
+
+  The valid regulator-compatible values are:
+  tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
+            vaux2, vaux33, vmmc, vbb
+  tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+            ldo6, ldo7, ldo8
+
+- xxx-supply: Input voltage supply regulator.
+  These entries are required if regulators are enabled for a device. Missing these
+  properties can cause the regulator registration to fail.
+  If some of input supply is powered through battery or always-on supply then
+  also it is require to have these parameters with proper node handle of always
+  on power supply.
+  tps65910:
+	vcc1-supply: VDD1 input.
+	vcc2-supply: VDD2 input.
+	vcc3-supply: VAUX33 and VMMC input.
+	vcc4-supply: VAUX1 and VAUX2 input.
+	vcc5-supply: VPLL and VDAC input.
+	vcc6-supply: VDIG1 and VDIG2 input.
+	vcc7-supply: VRTC and VBB input.
+	vccio-supply: VIO input.
+  tps65911:
+	vcc1-supply: VDD1 input.
+	vcc2-supply: VDD2 input.
+	vcc3-supply: LDO6, LDO7 and LDO8 input.
+	vcc4-supply: LDO5 input.
+	vcc5-supply: LDO3 and LDO4 input.
+	vcc6-supply: LDO1 and LDO2 input.
+	vcc7-supply: VRTC input.
+	vccio-supply: VIO input.
+
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+  in TPS6591X datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+  There should be 9 entries here, one for each gpio.
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+- ti,sleep-enable: Enable SLEEP state.
+- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state.
+- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state.
+- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state.
+
+Regulator Optional properties:
+- ti,regulator-ext-sleep-control: enable external sleep
+  control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
+  If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+	pmu: tps65910@d2 {
+		compatible = "ti,tps65910";
+		reg = <0xd2>;
+		interrupt-parent = <&intc>;
+		interrupts = < 0 118 0x04 >;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		ti,vmbch-threshold = 0;
+		ti,vmbch2-threshold = 0;
+		ti,en-ck32k-xtal;
+		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+		vcc1-supply = <&reg_parent>;
+		vcc2-supply = <&some_reg>;
+		vcc3-supply = <...>;
+		vcc4-supply = <...>;
+		vcc5-supply = <...>;
+		vcc6-supply = <...>;
+		vcc7-supply = <...>;
+		vccio-supply = <...>;
+
+		regulators {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd1_reg: regulator@0 {
+				regulator-compatible = "vdd1";
+				reg = <0>;
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			vdd2_reg: regulator@1 {
+				regulator-compatible = "vdd2";
+				reg = <1>;
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <4>;
+			};
+			vddctrl_reg: regulator@2 {
+				regulator-compatible = "vddctrl";
+				reg = <2>;
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			vio_reg: regulator@3 {
+				regulator-compatible = "vio";
+				reg = <3>;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+			ldo1_reg: regulator@4 {
+				regulator-compatible = "ldo1";
+				reg = <4>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo2_reg: regulator@5 {
+				regulator-compatible = "ldo2";
+				reg = <5>;
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo3_reg: regulator@6 {
+				regulator-compatible = "ldo3";
+				reg = <6>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo4_reg: regulator@7 {
+				regulator-compatible = "ldo4";
+				reg = <7>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo5_reg: regulator@8 {
+				regulator-compatible = "ldo5";
+				reg = <8>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo6_reg: regulator@9 {
+				regulator-compatible = "ldo6";
+				reg = <9>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo7_reg: regulator@10 {
+				regulator-compatible = "ldo7";
+				reg = <10>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+			ldo8_reg: regulator@11 {
+				regulator-compatible = "ldo8";
+				reg = <11>;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000000..8becb183a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,49 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65912".
+ - reg			: Slave address or chip select number (I2C / SPI).
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+ - gpio-controller	: Marks the device node as a GPIO Controller.
+ - #gpio-cells		: Should be two.  The first cell is the pin number and
+			    the second cell is used to specify flags.
+			    See ../gpio/gpio.txt for more information.
+ - regulators:		: List of child nodes that specify the regulator
+			    initialization data. Child nodes must be named
+			    after their hardware counterparts: dcdc[1-4] and
+			    ldo[1-10]. Each child nodes is defined using the
+			    standard binding for regulators.
+
+Example:
+
+	pmic: tps65912@2d {
+		compatible = "ti,tps65912";
+		reg = <0x2d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			dcdc1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <912000>;
+				regulator-max-microvolt = <1144000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/twl-family.txt b/Documentation/devicetree/bindings/mfd/twl-family.txt
new file mode 100644
index 0000000000..c2f9302965
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl-family.txt
@@ -0,0 +1,46 @@
+Texas Instruments TWL family
+
+The TWLs are Integrated Power Management Chips.
+Some version might contain much more analog function like
+USB transceiver or Audio amplifier.
+These chips are connected to an i2c bus.
+
+
+Required properties:
+- compatible : Must be "ti,twl4030";
+  For Integrated power-management/audio CODEC device used in OMAP3
+  based boards
+- compatible : Must be "ti,twl6030";
+  For Integrated power-management used in OMAP4 based boards
+- interrupts : This i2c device has an IRQ line connected to the main SoC
+- interrupt-controller : Since the twl support several interrupts internally,
+  it is considered as an interrupt controller cascaded to the SoC one.
+- #interrupt-cells = <1>;
+
+Optional node:
+- Child nodes contain in the twl. The twl family is made of several variants
+  that support a different number of features.
+  The children nodes will thus depend of the capability of the variant.
+
+
+Example:
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+twl@48 {
+    compatible = "ti,twl6030";
+    reg = <0x48>;
+    interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+    interrupt-controller;
+    #interrupt-cells = <1>;
+    interrupt-parent = <&gic>;
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    twl_rtc {
+        compatible = "ti,twl_rtc";
+        interrupts = <11>;
+        reg = <0>;
+    };
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
new file mode 100644
index 0000000000..414d2ae0ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt
@@ -0,0 +1,46 @@
+Texas Instruments TWL family (twl4030) audio module
+
+The audio module inside the TWL family consist of an audio codec and a vibra
+driver.
+
+Required properties:
+- compatible : must be "ti,twl4030-audio"
+
+Optional properties, nodes:
+
+Audio functionality:
+- codec { }: Need to be present if the audio functionality is used. Within this
+	     section the following options can be used:
+- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts
+		    from the start of the recorded sample (in ms)
+-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise
+-ti,hs_extmute: Use external mute for HS pop reduction
+-ti,hs_extmute_gpio: Use external GPIO to control the external mute
+-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the
+		      valid values.
+
+Vibra functionality
+- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if
+		   missing or it is 0, the vibra functionality is disabled.
+
+Example:
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+
+			ti,enable-vibra = <1>;
+
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
new file mode 100644
index 0000000000..3d19963312
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -0,0 +1,48 @@
+Texas Instruments TWL family (twl4030) reset and power management module
+
+The power management module inside the TWL family provides several facilities
+to control the power resources, including power scripts. For now, the
+binding only supports the complete shutdown of the system after poweroff.
+
+Required properties:
+- compatible : must be one of the following
+	"ti,twl4030-power"
+	"ti,twl4030-power-reset"
+	"ti,twl4030-power-idle"
+	"ti,twl4030-power-idle-osc-off"
+
+The use of ti,twl4030-power-reset is recommended at least on
+3530 that needs a special configuration for warm reset to work.
+
+When using ti,twl4030-power-idle, the TI recommended configuration
+for idle modes is loaded to the tlw4030 PMIC.
+
+When using ti,twl4030-power-idle-osc-off, the TI recommended
+configuration is used with the external oscillator being shut
+down during off-idle. Note that this does not work on all boards
+depending on how the external oscillator is wired.
+
+Optional properties:
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip will
+  initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
+
+Example:
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_power: power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
new file mode 100644
index 0000000000..06e9dd7a0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -0,0 +1,67 @@
+Texas Instruments TWL6040 family
+
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio,
+vibra and GPO functionality on OMAP4+ platforms.
+They are connected ot the host processor via i2c for commands, McPDM for audio
+data and commands.
+
+Required properties:
+- compatible : "ti,twl6040" for twl6040, "ti,twl6041" for twl6041
+- reg: must be 0x4b for i2c address
+- interrupts: twl6040 has one interrupt line connecteded to the main SoC
+- gpio-controller:
+- #gpio-cells = <1>: twl6040 provides GPO lines.
+- #clock-cells = <0>; twl6040 is a provider of pdmclk which is used by McPDM
+- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
+
+- vio-supply: Regulator for the twl6040 VIO supply
+- v2v1-supply: Regulator for the twl6040 V2V1 supply
+
+Optional properties, nodes:
+- enable-active-high: To power on the twl6040 during boot.
+- clocks: phandle to the clk32k and/or to mclk clock provider
+- clock-names: Must be "clk32k" for the 32K clock and "mclk" for the MCLK.
+
+Vibra functionality
+Required properties:
+- vddvibl-supply: Regulator for the left vibra motor
+- vddvibr-supply: Regulator for the right vibra motor
+- vibra { }: Configuration section for vibra parameters containing the following
+	     properties:
+- ti,vibldrv-res: Resistance parameter for left driver
+- ti,vibrdrv-res: Resistance parameter for right driver
+- ti,viblmotor-res: Resistance parameter for left motor
+- ti,viblmotor-res: Resistance parameter for right motor
+
+Optional properties within vibra { } section:
+- vddvibl_uV: If the vddvibl default voltage need to be changed
+- vddvibr_uV: If the vddvibr default voltage need to be changed
+
+Example:
+&i2c1 {
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+
+		interrupts = <0 119 4>;
+		interrupt-parent = <&gic>;
+		twl6040,audpwron-gpio = <&gpio4 31 0>;
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+
+		/* regulators for vibra motor */
+		vddvibl-supply = <&vbat>;
+		vddvibr-supply = <&vbat>;
+
+		vibra {
+			/* Vibra driver, motor resistance parameters */
+			ti,vibldrv-res = <8>;
+			ti,vibrdrv-res = <3>;
+			ti,viblmotor-res = <10>;
+			ti,vibrmotor-res = <10>;
+		};
+	};
+};
+
+/include/ "twl6040.dtsi"
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
new file mode 100644
index 0000000000..7902f3c5d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a
+  range of analogue I/O.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - $ref: /schemas/sound/wlf,arizona.yaml#
+  - $ref: /schemas/regulator/wlf,arizona.yaml#
+  - $ref: /schemas/extcon/wlf,arizona.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l24
+              - wlf,wm1831
+    then:
+      required:
+        - DCVDD-supply
+        - MICVDD-supply
+    else:
+      properties:
+        LDOVDD-supply:
+          description:
+            Digital power supply, used internally to generate DCVDD when
+            internally supplied.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - wlf,wm1814
+              - wlf,wm5102
+              - wlf,wm5110
+              - wlf,wm8280
+              - wlf,wm8997
+              - wlf,wm8998
+    then:
+      properties:
+        DBVDD2-supply:
+          description:
+            Databus power supply.
+
+      required:
+        - DBVDD2-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - wlf,wm1814
+              - wlf,wm5102
+              - wlf,wm5110
+              - wlf,wm8280
+              - wlf,wm8998
+    then:
+      properties:
+        DBVDD3-supply:
+          description:
+            Databus power supply.
+
+      required:
+        - DBVDD3-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cirrus,cs47l24
+              - wlf,wm1831
+              - wlf,wm8997
+    then:
+      properties:
+        SPKVDD-supply:
+          description:
+            Mono speaker driver power supply.
+
+      required:
+        - SPKVDD-supply
+    else:
+      properties:
+        SPKVDDL-supply:
+          description:
+            Left speaker driver power supply.
+
+        SPKVDDR-supply:
+          description:
+            Right speaker driver power supply.
+
+      required:
+        - SPKVDDL-supply
+        - SPKVDDR-supply
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs47l24
+      - wlf,wm1814
+      - wlf,wm1831
+      - wlf,wm5102
+      - wlf,wm5110
+      - wlf,wm8280
+      - wlf,wm8997
+      - wlf,wm8998
+
+  reg:
+    maxItems: 1
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
+  CPVDD-supply:
+    description:
+      Charge pump power supply.
+
+  DBVDD1-supply:
+    description:
+      Databus power supply.
+
+  DCVDD-supply:
+    description:
+      Digital power supply, normally supplied internally except on cs47l24,
+      wm1831 where it is mandatory.
+
+  MICVDD-supply:
+    description:
+      Microphone power supply, normally supplied internally except on
+      cs47l24, wm1831 where it is mandatory.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number and the second cell is used to
+      specify optional parameters.
+    const: 2
+
+  wlf,gpio-defaults:
+    description:
+      A list of GPIO configuration register values. Defines for the
+      appropriate values can found in dt-bindings/mfd/arizona.h. If
+      absent, no configuration of these registers is performed. If any
+      entry has a value that is out of range for a 16 bit register then the
+      chip default will be used. If present exactly five values must be
+      specified.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 5
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      The first cell is the IRQ number.  The second cell is the flags,
+      encoded as trigger masks.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Should reference the clocks supplied on MCLK1 and MCLK2.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description:
+      Should contains two strings mclk1 for the clock supplied on MCLK1,
+      recommended to be a high quality audio reference clock mclk2 for the
+      clock supplied on MCLK2, recommended to be an always on 32k clock.
+    oneOf:
+      - items:
+          - const: mclk1
+      - items:
+          - const: mclk2
+      - items:
+          - const: mclk1
+          - const: mclk2
+
+  reset-gpios:
+    maxItems: 1
+
+  wlf,reset:
+    description:
+      GPIO specifier for the GPIO controlling RESET
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD1-supply
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/arizona.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        wm5102: codec@1a {
+            compatible = "wlf,wm5102";
+            reg = <0x1a>;
+
+            reset-gpios = <&gpio 0>;
+            wlf,ldoena = <&gpio 1>;
+
+            AVDD-supply = <&vdd1v8>;
+            DBVDD1-supply = <&vdd1v8>;
+            DBVDD2-supply = <&vdd1v8>;
+            DBVDD3-supply = <&vdd1v8>;
+            CPVDD-supply = <&vdd1v8>;
+            LDOVDD-supply = <&vdd1v8>;
+            SPKVDDL-supply = <&vdd5v>;
+            SPKVDDR-supply = <&vdd5v>;
+
+            interrupts = <347>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gic>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            #sound-dai-cells = <1>;
+
+            wlf,gpio-defaults = <
+                ARIZONA_GP_FN_TXLRCLK
+                ARIZONA_GP_DEFAULT
+                ARIZONA_GP_DEFAULT
+                ARIZONA_GP_DEFAULT
+                ARIZONA_GP_DEFAULT
+            >;
+
+            clocks = <&clks 0>, <&clks 1>;
+            clock-names = "mclk1", "mclk2";
+
+            wlf,inmode = <ARIZONA_INMODE_DIFF ARIZONA_INMODE_DMIC>;
+            wlf,dmic-ref = <ARIZONA_DMIC_MICBIAS1 ARIZONA_DMIC_MICBIAS3>;
+
+            wlf,use-jd2;
+            wlf,use-jd2-nopull;
+            wlf,jd-invert;
+
+            wlf,micd-software-compare;
+            wlf,micd-detect-debounce = <0>;
+            wlf,micd-pol-gpio = <&codec 2 0>;
+            wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
+            wlf,micd-dbtime = <4>;
+            wlf,micd-timeout-ms = <100>;
+            wlf,micd-force-micbias;
+            wlf,micd-configs = <0 ARIZONA_DMIC_MICBIAS1 0>,
+                               <0x2000 ARIZONA_DMIC_MICBIAS2 1>;
+
+            wlf,gpsw = <ARIZONA_GPSW_OPEN>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
new file mode 100644
index 0000000000..6b84b1b0d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -0,0 +1,81 @@
+Cirrus Logic/Wolfson Microelectronics wm831x PMICs
+
+System PMICs with a wide range of additional features.
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "wlf,wm8310"
+        "wlf,wm8311"
+        "wlf,wm8312"
+        "wlf,wm8320"
+        "wlf,wm8321"
+        "wlf,wm8325"
+        "wlf,wm8326"
+
+  - reg : I2C slave address when connected using I2C, chip select number
+    when using SPI.
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+  - interrupts : The interrupt line the IRQ signal for the device is
+    connected to.
+
+  - interrupt-controller : wm831x devices contain interrupt controllers and
+    may provide interrupt services to other devices.
+  - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the
+    second cell is the flags, encoded as the trigger masks from
+    ../interrupt-controller/interrupts.txt
+
+Optional sub-nodes:
+  - phys : Contains a phandle to the USB PHY.
+  - regulators : Contains sub-nodes for each of the regulators supplied by
+    the device. The regulators are bound using their names listed below:
+
+    dcdc1 : DCDC1
+    dcdc2 : DCDC2
+    dcdc3 : DCDC3
+    dcdc4 : DCDC3
+    isink1 : ISINK1
+    isink2 : ISINK2
+    ldo1 : LDO1
+    ldo2 : LDO2
+    ldo3 : LDO3
+    ldo4 : LDO4
+    ldo5 : LDO5
+    ldo7 : LDO7
+    ldo11 : LDO11
+
+    The bindings details of each regulator can be found in:
+    ../regulator/regulator.txt
+
+Example:
+
+wm8310: pmic@36 {
+	compatible = "wlf,wm8310";
+	reg = <0x36>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	interrupts = <347>;
+	interrupt-parent = <&gic>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	regulators {
+		dcdc1: dcdc1 {
+			regulator-name = "DCDC1";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+		ldo1: ldo1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1700000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
new file mode 100644
index 0000000000..f3d8394b27
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AC100
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  compatible:
+    const: x-powers,ac100
+
+  reg:
+    maxItems: 1
+
+  codec:
+    type: object
+
+    properties:
+      "#clock-cells":
+        const: 0
+
+      compatible:
+        const: x-powers,ac100-codec
+
+      interrupts:
+        maxItems: 1
+
+      clock-output-names:
+        maxItems: 1
+        description: >
+          Name of the 4M_adda clock exposed by the codec
+
+    required:
+      - "#clock-cells"
+      - compatible
+      - interrupts
+      - clock-output-names
+
+    additionalProperties: false
+
+  rtc:
+    type: object
+
+    properties:
+      "#clock-cells":
+        const: 1
+
+      compatible:
+        const: x-powers,ac100-rtc
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+        description: >
+           A phandle to the codec's "4M_adda" clock
+
+      clock-output-names:
+        maxItems: 3
+        description: >
+          Name of the cko1, cko2 and cko3 clocks exposed by the codec
+
+    required:
+      - "#clock-cells"
+      - compatible
+      - interrupts
+      - clocks
+      - clock-output-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - codec
+  - rtc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rsb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@e89 {
+            compatible = "x-powers,ac100";
+            reg = <0xe89>;
+
+            ac100_codec: codec {
+                compatible = "x-powers,ac100-codec";
+                interrupt-parent = <&r_pio>;
+                interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+                #clock-cells = <0>;
+                clock-output-names = "4M_adda";
+            };
+
+            ac100_rtc: rtc {
+                compatible = "x-powers,ac100-rtc";
+                interrupt-parent = <&nmi_intc>;
+                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                clocks = <&ac100_codec>;
+                #clock-cells = <1>;
+                clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
new file mode 100644
index 0000000000..9ad5574613
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -0,0 +1,413 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AXP PMIC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp152
+              - x-powers,axp202
+              - x-powers,axp209
+
+    then:
+      properties:
+        regulators:
+          properties:
+            x-powers,dcdc-freq:
+              minimum: 750
+              maximum: 1875
+              default: 1500
+
+    else:
+      properties:
+        regulators:
+          properties:
+            x-powers,dcdc-freq:
+              minimum: 1800
+              maximum: 4050
+              default: 3000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp152
+              - x-powers,axp202
+              - x-powers,axp209
+
+    then:
+      properties:
+        x-powers,drive-vbus-en: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: x-powers,axp806
+
+    then:
+      properties:
+        x-powers,self-working-mode: false
+        x-powers,master-mode: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: x-powers,axp305
+
+    then:
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp313a
+              - x-powers,axp15060
+
+    then:
+      properties:
+        x-powers,dcdc-freq: false
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp152
+          - x-powers,axp192
+          - x-powers,axp202
+          - x-powers,axp209
+          - x-powers,axp221
+          - x-powers,axp223
+          - x-powers,axp313a
+          - x-powers,axp803
+          - x-powers,axp806
+          - x-powers,axp809
+          - x-powers,axp813
+          - x-powers,axp15060
+      - items:
+          - const: x-powers,axp228
+          - const: x-powers,axp221
+      - items:
+          - const: x-powers,axp805
+          - const: x-powers,axp806
+      - items:
+          - const: x-powers,axp305
+          - const: x-powers,axp805
+          - const: x-powers,axp806
+      - items:
+          - const: x-powers,axp818
+          - const: x-powers,axp813
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  x-powers,drive-vbus-en:
+    type: boolean
+    description: >
+      Set this when the N_VBUSEN pin is used as an output pin to control an
+      external regulator to drive the OTG VBus, rather then as an input pin
+      which signals whether the board is driving OTG VBus or not.
+
+  x-powers,self-working-mode:
+    type: boolean
+    description: >
+      Set this when the PMIC is wired for self-working mode through the MODESET
+      pin.
+
+  x-powers,master-mode:
+    type: boolean
+    description: >
+      Set this when the PMIC is wired for master mode through the MODESET pin.
+
+  vin1-supply:
+    description: >
+      DCDC1 power supply node, if present.
+
+  vin2-supply:
+    description: >
+      DCDC2 power supply node, if present.
+
+  vin3-supply:
+    description: >
+      DCDC3 power supply node, if present.
+
+  vin4-supply:
+    description: >
+      DCDC4 power supply node, if present.
+
+  vin5-supply:
+    description: >
+      DCDC5 power supply node, if present.
+
+  vin6-supply:
+    description: >
+      DCDC6 power supply node, if present.
+
+  vin7-supply:
+    description: >
+      DCDC7 power supply node, if present.
+
+  vina-supply:
+    description: >
+      DCDCA power supply node, if present.
+
+  vinb-supply:
+    description: >
+      DCDCB power supply node, if present.
+
+  vinc-supply:
+    description: >
+      DCDCC power supply node, if present.
+
+  vind-supply:
+    description: >
+      DCDCD power supply node, if present.
+
+  vine-supply:
+    description: >
+      DCDCE power supply node, if present.
+
+  acin-supply:
+    description: >
+      LDO1 power supply node, if present.
+
+  ldo24in-supply:
+    description: >
+      LDO2 and LDO4 power supply node, if present.
+
+  ldo3in-supply:
+    description: >
+      LDO3 power supply node, if present.
+
+  ldo5in-supply:
+    description: >
+      LDO5 power supply node, if present.
+
+  aldoin-supply:
+    description: >
+      ALDO* power supply node, if present.
+
+  bldoin-supply:
+    description: >
+      BLDO* power supply node, if present.
+
+  cldoin-supply:
+    description: >
+      CLDO* power supply node, if present.
+
+  dldoin-supply:
+    description: >
+      DLDO* power supply node, if present.
+
+  eldoin-supply:
+    description: >
+      ELDO* power supply node, if present.
+
+  fldoin-supply:
+    description: >
+      FLDO* power supply node, if present.
+
+  ips-supply:
+    description: >
+      LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present.
+
+  drivevbus-supply:
+    description: >
+      DRIVEVBUS power supply node, if present.
+
+  swin-supply:
+    description: >
+      SW power supply node, if present.
+
+  adc:
+    $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml#
+
+  gpio:
+    $ref: /schemas/gpio/x-powers,axp209-gpio.yaml#
+
+  ac-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+
+  battery-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+
+  usb-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+
+  regulators:
+    type: object
+
+    properties:
+      x-powers,dcdc-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Defines the work frequency of DC-DC in kHz.
+
+    patternProperties:
+      "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          regulator-ramp-delay:
+            description: >
+              Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
+              the AXP209.
+
+          regulator-soft-start:
+            description: >
+              Only valid for the LDO3 regulator.
+
+          x-powers,dcdc-workmode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1]
+            description: >
+              Only valid for DCDC regulators. Setup 1 for PWM mode, 0
+              for AUTO (PWM/PFM) mode. The DCDC regulators work in a
+              mixed PWM/PFM mode, using PFM under light loads and
+              switching to PWM for heavier loads. Forcing PWM mode
+              trades efficiency under light loads for lower output
+              noise. This probably makes sense for HiFi audio related
+              applications that aren't battery constrained.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic@30 {
+              compatible = "x-powers,axp152";
+              reg = <0x30>;
+              interrupts = <0>;
+              interrupt-controller;
+              #interrupt-cells = <1>;
+          };
+      };
+
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic@34 {
+              compatible = "x-powers,axp209";
+              reg = <0x34>;
+              interrupt-parent = <&nmi_intc>;
+              interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+              interrupt-controller;
+              #interrupt-cells = <1>;
+
+              ac_power_supply: ac-power {
+                  compatible = "x-powers,axp202-ac-power-supply";
+              };
+
+              axp_adc: adc {
+                  compatible = "x-powers,axp209-adc";
+                  #io-channel-cells = <1>;
+              };
+
+              axp_gpio: gpio {
+                  compatible = "x-powers,axp209-gpio";
+                  gpio-controller;
+                  #gpio-cells = <2>;
+
+                  gpio0-adc-pin {
+                      pins = "GPIO0";
+                      function = "adc";
+                  };
+              };
+
+              battery_power_supply: battery-power {
+                  compatible = "x-powers,axp209-battery-power-supply";
+              };
+
+              regulators {
+                  /* Default work frequency for buck regulators */
+                  x-powers,dcdc-freq = <1500>;
+
+                  reg_dcdc2: dcdc2 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <1000000>;
+                      regulator-max-microvolt = <1450000>;
+                      regulator-name = "vdd-cpu";
+                  };
+
+                  reg_dcdc3: dcdc3 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <1000000>;
+                      regulator-max-microvolt = <1400000>;
+                      regulator-name = "vdd-int-dll";
+                  };
+
+                  reg_ldo1: ldo1 {
+                      /* LDO1 is a fixed output regulator */
+                      regulator-always-on;
+                      regulator-min-microvolt = <1300000>;
+                      regulator-max-microvolt = <1300000>;
+                      regulator-name = "vdd-rtc";
+                  };
+
+                  reg_ldo2: ldo2 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <3000000>;
+                      regulator-max-microvolt = <3000000>;
+                      regulator-name = "avcc";
+                  };
+
+                  reg_ldo3: ldo3 {
+                      regulator-name = "ldo3";
+                  };
+
+                  reg_ldo4: ldo4 {
+                      regulator-name = "ldo4";
+                  };
+
+                  reg_ldo5: ldo5 {
+                      regulator-name = "ldo5";
+                  };
+              };
+
+              usb_power_supply: usb-power {
+                  compatible = "x-powers,axp202-usb-power-supply";
+              };
+          };
+      };
diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
new file mode 100644
index 0000000000..6e880a46d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xylon LogiCVC multi-function device
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The LogiCVC is a display controller that also contains a GPIO controller.
+  As a result, a multi-function device is exposed as parent of the display
+  and GPIO blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xylon,logicvc-3.02.a
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - xylon,logicvc-3.02.a
+
+  required:
+    - compatible
+
+patternProperties:
+  "^gpio@[0-9a-f]+$":
+    $ref: /schemas/gpio/xylon,logicvc-gpio.yaml#
+
+  "^display@[0-9a-f]+$":
+    $ref: /schemas/display/xylon,logicvc-display.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
new file mode 100644
index 0000000000..e0f901edc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
@@ -0,0 +1,39 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor
+
+RAVE Supervisory Processor communicates with SoC over UART. It is
+expected that its Device Tree node is specified as a child of a node
+corresponding to UART controller used for communication.
+
+Required parent device properties:
+
+ - compatible: Should be one of:
+	- "zii,rave-sp-niu"
+	- "zii,rave-sp-mezz"
+	- "zii,rave-sp-esb"
+	- "zii,rave-sp-rdu1"
+	- "zii,rave-sp-rdu2"
+
+ - current-speed: Should be set to baud rate SP device is using
+
+RAVE SP consists of the following sub-devices:
+
+Device				 Description
+------				 -----------
+rave-sp-wdt			: Watchdog
+rave-sp-nvmem			: Interface to onboard EEPROM
+rave-sp-backlight		: Display backlight
+rave-sp-hwmon			: Interface to onboard hardware sensors
+rave-sp-leds			: Interface to onboard LEDs
+rave-sp-input			: Interface to onboard power button
+
+Example of usage:
+
+	rdu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/mips/ath79-soc.txt b/Documentation/devicetree/bindings/mips/ath79-soc.txt
new file mode 100644
index 0000000000..88a12a43e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ath79-soc.txt
@@ -0,0 +1,21 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX SoC
+
+Each device tree must specify a compatible value for the AR SoC
+it uses in the compatible property of the root node. The compatible
+value must be one of the following values:
+
+- qca,ar7130
+- qca,ar7141
+- qca,ar7161
+- qca,ar7240
+- qca,ar7241
+- qca,ar7242
+- qca,ar9130
+- qca,ar9132
+- qca,ar9330
+- qca,ar9331
+- qca,ar9341
+- qca,ar9342
+- qca,ar9344
+- qca,qca9556
+- qca,qca9558
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
new file mode 100644
index 0000000000..3a66d3c483
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -0,0 +1,166 @@
+* Broadcom cable/DSL/settop platforms
+
+Required properties:
+
+- compatible: "brcm,bcm3368", "brcm,bcm3384", "brcm,bcm33843"
+              "brcm,bcm3384-viper", "brcm,bcm33843-viper"
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6362", "brcm,bcm6368",
+              "brcm,bcm63168", "brcm,bcm63268",
+              "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
+              "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
+
+The experimental -viper variants are for running Linux on the 3384's
+BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible     : should be one of
+		   "brcm,bcm7425-aon-ctrl"
+		   "brcm,bcm7429-aon-ctrl"
+		   "brcm,bcm7435-aon-ctrl" and
+		   "brcm,brcmstb-aon-ctrl"
+- reg            : the register start and length for the AON CTRL block
+
+Example:
+
+syscon@410000 {
+	compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl";
+	reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-memc" and "simple-bus"
+- ranges	 : should contain the child address in the parent address
+		   space, must be 0 here, and the register start and length of
+		   the entire memory controller (including all sub nodes: DDR PHY,
+		   arbiter, etc.)
+- #address-cells : must be 1
+- #size-cells	 : must be 1
+
+Example:
+
+	memory-controller@0 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges = <0x0 0x0 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc-arb@1000 {
+			...
+		};
+
+		memc-ddr@2000 {
+			...
+		};
+
+		ddr-phy@6000 {
+			...
+		};
+	};
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible     : should contain one of these
+		   "brcm,brcmstb-ddr-phy-v64.5"
+		   "brcm,brcmstb-ddr-phy"
+
+- reg            : the DDR PHY register range and length
+
+Example:
+
+	ddr-phy@6000 {
+		compatible = "brcm,brcmstb-ddr-phy-v64.5";
+		reg = <0x6000 0xc8>;
+	};
+
+== DDR memory controller sequencer
+
+Control registers for this memory controller's DDR memory sequencer
+
+Required properties:
+- compatible     : should contain one of these
+		   "brcm,bcm7425-memc-ddr"
+		   "brcm,bcm7429-memc-ddr"
+		   "brcm,bcm7435-memc-ddr" and
+		   "brcm,brcmstb-memc-ddr"
+
+- reg            : the DDR sequencer register range and length
+
+Example:
+
+	memc-ddr@2000 {
+		compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr";
+		reg = <0x2000 0x300>;
+	};
+
+== MEMC Arbiter
+
+The memory controller arbiter is responsible for memory clients allocation
+(bandwidth, priorities etc.) and needs to have its contents restored during
+deep sleep states (S3).
+
+Required properties:
+
+- compatible	: should contain one of these
+		  "brcm,brcmstb-memc-arb-v10.0.0.0"
+		  "brcm,brcmstb-memc-arb"
+
+- reg		: the DDR Arbiter register range and length
+
+Example:
+
+	memc-arb@1000 {
+		compatible = "brcm,brcmstb-memc-arb-v10.0.0.0";
+		reg = <0x1000 0x248>;
+	};
+
+== Timers
+
+The Broadcom STB chips contain a timer block with several general purpose
+timers that can be used.
+
+Required properties:
+
+- compatible	: should contain one of:
+		  "brcm,bcm7425-timers"
+		  "brcm,bcm7429-timers"
+		  "brcm,bcm7435-timers" and
+		  "brcm,brcmstb-timers"
+- reg		: the timers register range
+- interrupts	: the interrupt line for this timer block
+
+Example:
+
+	timers: timer@4067c0 {
+		compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers";
+		reg = <0x4067c0 0x40>;
+		interrupts = <&periph_intc 19>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.yaml b/Documentation/devicetree/bindings/mips/brcm/soc.yaml
new file mode 100644
index 0000000000..975945ca28
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/brcm/soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom cable/DSL/settop platforms
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: |
+    Boards Broadcom cable/DSL/settop SoC shall have the following properties.
+    The experimental -viper variants are for running Linux on the 3384's
+    BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    enum:
+      - brcm,bcm3368
+      - brcm,bcm3384
+      - brcm,bcm33843
+      - brcm,bcm3384-viper
+      - brcm,bcm33843-viper
+      - brcm,bcm6328
+      - brcm,bcm6358
+      - brcm,bcm6362
+      - brcm,bcm6368
+      - brcm,bcm63168
+      - brcm,bcm63268
+      - brcm,bcm7125
+      - brcm,bcm7346
+      - brcm,bcm7358
+      - brcm,bcm7360
+      - brcm,bcm7362
+      - brcm,bcm7420
+      - brcm,bcm7425
+
+  cpus:
+    type: object
+    additionalProperties: false
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      mips-hpt-frequency:
+        description: MIPS counter high precision timer frequency.
+         This is common to all CPUs in the system so it lives
+         under the "cpus" node.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^cpu@[0-9]$":
+        type: object
+        $ref: /schemas/mips/cpus.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - mips-hpt-frequency
+
+additionalProperties: true
+
+examples:
+  - |
+     / {
+         compatible = "brcm,bcm3368";
+         #address-cells = <1>;
+         #size-cells = <1>;
+         model = "Broadcom 3368";
+
+         cpus {
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           mips-hpt-frequency = <150000000>;
+
+           cpu@0 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <0>;
+           };
+
+           cpu@1 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <1>;
+           };
+         };
+       };
+...
diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
new file mode 100644
index 0000000000..6581478225
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
@@ -0,0 +1,126 @@
+* Boot Bus
+
+The Octeon Boot Bus is a configurable parallel bus with 8 chip
+selects.  Each chip select is independently configurable.
+
+Properties:
+- compatible: "cavium,octeon-3860-bootbus"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the Boot Bus' register bank.
+
+- #address-cells: Must be <2>.  The first cell is the chip select
+   within the bootbus.  The second cell is the offset from the chip select.
+
+- #size-cells: Must be <1>.
+
+- ranges: There must be one one triplet of (child-bus-address,
+  parent-bus-address, length) for each active chip select.  If the
+  length element for any triplet is zero, the chip select is disabled,
+  making it inactive.
+
+The configuration parameters for each chip select are stored in child
+nodes.
+
+Configuration Properties:
+- compatible:  "cavium,octeon-3860-bootbus-config"
+
+- cavium,cs-index: A single cell indicating the chip select that
+  corresponds to this configuration.
+
+- cavium,t-adr: A cell specifying the ADR timing (in nS).
+
+- cavium,t-ce: A cell specifying the CE timing (in nS).
+
+- cavium,t-oe: A cell specifying the OE timing (in nS).
+
+- cavium,t-we: A cell specifying the WE timing (in nS).
+
+- cavium,t-rd-hld: A cell specifying the RD_HLD timing (in nS).
+
+- cavium,t-wr-hld: A cell specifying the WR_HLD timing (in nS).
+
+- cavium,t-pause: A cell specifying the PAUSE timing (in nS).
+
+- cavium,t-wait: A cell specifying the WAIT timing (in nS).
+
+- cavium,t-page: A cell specifying the PAGE timing (in nS).
+
+- cavium,t-rd-dly: A cell specifying the RD_DLY timing (in nS).
+
+- cavium,pages: A cell specifying the PAGES parameter (0 = 8 bytes, 1
+  = 2 bytes, 2 = 4 bytes, 3 = 8 bytes).
+
+- cavium,wait-mode: Optional.  If present, wait mode (WAITM) is selected.
+
+- cavium,page-mode: Optional.  If present, page mode (PAGEM) is selected.
+
+- cavium,bus-width: A cell specifying the WIDTH parameter (in bits) of
+  the bus for this chip select.
+
+- cavium,ale-mode: Optional.  If present, ALE mode is selected.
+
+- cavium,sam-mode: Optional.  If present, SAM mode is selected.
+
+- cavium,or-mode: Optional.  If present, OR mode is selected.
+
+Example:
+	bootbus: bootbus@1180000000000 {
+		compatible = "cavium,octeon-3860-bootbus";
+		reg = <0x11800 0x00000000 0x0 0x200>;
+		/* The chip select number and offset */
+		#address-cells = <2>;
+		/* The size of the chip select region */
+		#size-cells = <1>;
+		ranges = <0 0  0x0 0x1f400000  0xc00000>,
+			 <1 0  0x10000 0x30000000  0>,
+			 <2 0  0x10000 0x40000000  0>,
+			 <3 0  0x10000 0x50000000  0>,
+			 <4 0  0x0 0x1d020000  0x10000>,
+			 <5 0  0x0 0x1d040000  0x10000>,
+			 <6 0  0x0 0x1d050000  0x10000>,
+			 <7 0  0x10000 0x90000000  0>;
+
+			cavium,cs-config@0 {
+			compatible = "cavium,octeon-3860-bootbus-config";
+			cavium,cs-index = <0>;
+			cavium,t-adr  = <20>;
+			cavium,t-ce   = <60>;
+			cavium,t-oe   = <60>;
+			cavium,t-we   = <45>;
+			cavium,t-rd-hld = <35>;
+			cavium,t-wr-hld = <45>;
+			cavium,t-pause  = <0>;
+			cavium,t-wait   = <0>;
+			cavium,t-page   = <35>;
+			cavium,t-rd-dly = <0>;
+
+			cavium,pages     = <0>;
+			cavium,bus-width = <8>;
+		};
+		.
+		.
+		.
+		cavium,cs-config@6 {
+			compatible = "cavium,octeon-3860-bootbus-config";
+			cavium,cs-index = <6>;
+			cavium,t-adr  = <5>;
+			cavium,t-ce   = <300>;
+			cavium,t-oe   = <270>;
+			cavium,t-we   = <150>;
+			cavium,t-rd-hld = <100>;
+			cavium,t-wr-hld = <70>;
+			cavium,t-pause  = <0>;
+			cavium,t-wait   = <0>;
+			cavium,t-page   = <320>;
+			cavium,t-rd-dly = <0>;
+
+			cavium,pages     = <0>;
+			cavium,wait-mode;
+			cavium,bus-width = <16>;
+		};
+		.
+		.
+		.
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/cib.txt b/Documentation/devicetree/bindings/mips/cavium/cib.txt
new file mode 100644
index 0000000000..410efa3222
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/cib.txt
@@ -0,0 +1,41 @@
+* Cavium Interrupt Bus widget
+
+Properties:
+- compatible: "cavium,octeon-7130-cib"
+
+  Compatibility with cn70XX SoCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: Two elements consisting of the addresses of the RAW and EN
+  registers of the CIB block
+
+- cavium,max-bits: The index (zero based) of the highest numbered bit
+  in the CIB block.
+
+- interrupts: The CIU line to which the CIB block is connected.
+
+- #interrupt-cells: Must be <2>.  The first cell is the bit within the
+   CIB.  The second cell specifies the triggering semantics of the
+   line.
+
+Example:
+
+	interrupt-controller@107000000e000 {
+		compatible = "cavium,octeon-7130-cib";
+		reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
+		      <0x10700 0x0000e100 0x0 0x8>; /* EN */
+		cavium,max-bits = <23>;
+
+		interrupt-controller;
+		interrupt-parent = <&ciu>;
+		interrupts = <1 24>;
+		/* Interrupts are specified by two parts:
+		 * 1) Bit number in the CIB* registers
+		 * 2) Triggering (1 - edge rising
+		 *		  2 - edge falling
+		 *		  4 - level active high
+		 *		  8 - level active low)
+		 */
+		#interrupt-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu.txt b/Documentation/devicetree/bindings/mips/cavium/ciu.txt
new file mode 100644
index 0000000000..2c2d0746b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/ciu.txt
@@ -0,0 +1,26 @@
+* Central Interrupt Unit
+
+Properties:
+- compatible: "cavium,octeon-3860-ciu"
+
+  Compatibility with all cn3XXX, cn5XXX and cn63XX SOCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>.  The first cell is the bank within
+   the CIU and may have a value of 0 or 1.  The second cell is the bit
+   within the bank and may have a value between 0 and 63.
+
+Example:
+	interrupt-controller@1070000000000 {
+		compatible = "cavium,octeon-3860-ciu";
+		interrupt-controller;
+		/* Interrupts are specified by two parts:
+		 * 1) Controller register (0 or 1)
+		 * 2) Bit within the register (0..63)
+		 */
+		#interrupt-cells = <2>;
+		reg = <0x10700 0x00000000 0x0 0x7000>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu2.txt b/Documentation/devicetree/bindings/mips/cavium/ciu2.txt
new file mode 100644
index 0000000000..0ec7ba8bbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/ciu2.txt
@@ -0,0 +1,27 @@
+* Central Interrupt Unit
+
+Properties:
+- compatible: "cavium,octeon-6880-ciu2"
+
+  Compatibility with 68XX SOCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>.  The first cell is the bank within
+  the CIU and may have a value between 0 and 63.  The second cell is
+  the bit within the bank and may also have a value between 0 and 63.
+
+Example:
+	interrupt-controller@1070100000000 {
+		compatible = "cavium,octeon-6880-ciu2";
+		interrupt-controller;
+		/* Interrupts are specified by two parts:
+		 * 1) Controller register (0..63)
+		 * 2) Bit within the register (0..63)
+		 */
+		#address-cells = <0>;
+		#interrupt-cells = <2>;
+		reg = <0x10701 0x00000000 0x0 0x4000000>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu3.txt b/Documentation/devicetree/bindings/mips/cavium/ciu3.txt
new file mode 100644
index 0000000000..616862ad2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/ciu3.txt
@@ -0,0 +1,27 @@
+* Central Interrupt Unit v3
+
+Properties:
+- compatible: "cavium,octeon-7890-ciu3"
+
+  Compatibility with 78XX and 73XX SOCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>.  The first cell is source number.
+  The second cell indicates the triggering semantics, and may have a
+  value of either 4 for level semantics, or 1 for edge semantics.
+
+Example:
+	interrupt-controller@1010000000000 {
+		compatible = "cavium,octeon-7890-ciu3";
+		interrupt-controller;
+		/* Interrupts are specified by two parts:
+		 * 1) Source number (20 significant bits)
+		 * 2) Trigger type: (4 == level, 1 == edge)
+		 */
+		#address-cells = <0>;
+		#interrupt-cells = <2>;
+		reg = <0x10100 0x00000000 0x0 0xb0000000>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
new file mode 100644
index 0000000000..a5bdff4000
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/dma-engine.txt
@@ -0,0 +1,21 @@
+* DMA Engine.
+
+The Octeon DMA Engine transfers between the Boot Bus and main memory.
+The DMA Engine will be referred to by phandle by any device that is
+connected to it.
+
+Properties:
+- compatible: "cavium,octeon-5750-bootbus-dma"
+
+  Compatibility with all cn52XX, cn56XX and cn6XXX SOCs.
+
+- reg: The base address of the DMA Engine's register bank.
+
+- interrupts: A single interrupt specifier.
+
+Example:
+	dma0: dma-engine@1180000000100 {
+		compatible = "cavium,octeon-5750-bootbus-dma";
+		reg = <0x11800 0x00000100 0x0 0x8>;
+		interrupts = <0 63>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
new file mode 100644
index 0000000000..3bd3c2f0b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/sata-uctl.txt
@@ -0,0 +1,42 @@
+* UCTL SATA controller glue
+
+UCTL is the bridge unit between the I/O interconnect (an internal bus)
+and the SATA AHCI host controller (UAHC). It performs the following functions:
+	- provides interfaces for the applications to access the UAHC AHCI
+	  registers on the CN71XX I/O space.
+	- provides a bridge for UAHC to fetch AHCI command table entries and data
+	  buffers from Level 2 Cache.
+	- posts interrupts to the CIU.
+	- contains registers that:
+		- control the behavior of the UAHC
+		- control the clock/reset generation to UAHC
+		- control endian swapping for all UAHC registers and DMA accesses
+
+Properties:
+
+- compatible: "cavium,octeon-7130-sata-uctl"
+
+  Compatibility with the cn7130 SOC.
+
+- reg: The base address of the UCTL register bank.
+
+- #address-cells, #size-cells, ranges and dma-ranges must be present and hold
+	suitable values to map all child nodes.
+
+Example:
+
+	uctl@118006c000000 {
+		compatible = "cavium,octeon-7130-sata-uctl";
+		reg = <0x11800 0x6c000000 0x0 0x100>;
+		ranges; /* Direct mapping */
+		dma-ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		sata: sata@16c0000000000 {
+			compatible = "cavium,octeon-7130-ahci";
+			reg = <0x16c00 0x00000000 0x0 0x200>;
+			interrupt-parent = <&cibsata>;
+			interrupts = <2 4>; /* Bit: 2, level */
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mips/cavium/uctl.txt b/Documentation/devicetree/bindings/mips/cavium/uctl.txt
new file mode 100644
index 0000000000..aa66b9b8d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/uctl.txt
@@ -0,0 +1,46 @@
+* UCTL USB controller glue
+
+Properties:
+- compatible: "cavium,octeon-6335-uctl"
+
+  Compatibility with all cn6XXX SOCs.
+
+- reg: The base address of the UCTL register bank.
+
+- #address-cells: Must be <2>.
+
+- #size-cells: Must be <2>.
+
+- ranges: Empty to signify direct mapping of the children.
+
+- refclk-frequency: A single cell containing the reference clock
+  frequency in Hz.
+
+- refclk-type: A string describing the reference clock connection
+  either "crystal" or "external".
+
+Example:
+	uctl@118006f000000 {
+		compatible = "cavium,octeon-6335-uctl";
+		reg = <0x11800 0x6f000000 0x0 0x100>;
+		ranges; /* Direct mapping */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		/* 12MHz, 24MHz and 48MHz allowed */
+		refclk-frequency = <24000000>;
+		/* Either "crystal" or "external" */
+		refclk-type = "crystal";
+
+		ehci@16f0000000000 {
+			compatible = "cavium,octeon-6335-ehci","usb-ehci";
+			reg = <0x16f00 0x00000000 0x0 0x100>;
+			interrupts = <0 56>;
+			big-endian-regs;
+		};
+		ohci@16f0000000400 {
+			compatible = "cavium,octeon-6335-ohci","usb-ohci";
+			reg = <0x16f00 0x00000400 0x0 0x100>;
+			interrupts = <0 56>;
+			big-endian-regs;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mips/cpus.yaml b/Documentation/devicetree/bindings/mips/cpus.yaml
new file mode 100644
index 0000000000..cf382dea39
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cpus.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPUs
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description: |
+  The device tree allows to describe the layout of CPUs in a system through
+  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+  defining properties for every CPU.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bmips3300
+      - brcm,bmips4350
+      - brcm,bmips4380
+      - brcm,bmips5000
+      - brcm,bmips5200
+      - ingenic,xburst-mxu1.0
+      - ingenic,xburst-fpu1.0-mxu1.1
+      - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst2-fpu2.1-mxu2.1-smt
+      - loongson,gs264
+      - mips,m14Kc
+      - mips,mips4Kc
+      - mips,mips4KEc
+      - mips,mips24Kc
+      - mips,mips24KEc
+      - mips,mips74Kc
+      - mips,mips1004Kc
+      - mti,interaptiv
+      - mti,mips24KEc
+      - mti,mips14KEc
+      - mti,mips14Kc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  device_type: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ingenic,xburst-mxu1.0
+              - ingenic,xburst-fpu1.0-mxu1.1
+              - ingenic,xburst-fpu2.0-mxu2.0
+              - ingenic,xburst2-fpu2.1-mxu2.1-smt
+    then:
+      required:
+        - device_type
+        - clocks
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <0>;
+      };
+
+      cpu@1 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <1>;
+      };
+    };
+
+  - |
+    // Example 2 (Ingenic CPU)
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    cpus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <0>;
+
+        clocks = <&cgu JZ4780_CLK_CPU>;
+      };
+
+      cpu@1 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <1>;
+
+        clocks = <&cgu JZ4780_CLK_CORE1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
new file mode 100644
index 0000000000..2d5126d529
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
@@ -0,0 +1,10 @@
+Imagination Technologies' Pistachio SoC based Marduk Board
+==========================================================
+
+Compatible string must be "img,pistachio-marduk", "img,pistachio"
+
+Hardware and other related documentation is available at
+https://docs.creatordev.io/ci40/
+
+It is also known as Creator Ci40. Marduk is legacy name and will
+be there for decades.
diff --git a/Documentation/devicetree/bindings/mips/img/pistachio.txt b/Documentation/devicetree/bindings/mips/img/pistachio.txt
new file mode 100644
index 0000000000..a736d889c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/img/pistachio.txt
@@ -0,0 +1,42 @@
+Imagination Pistachio SoC
+=========================
+
+Required properties:
+--------------------
+ - compatible: Must include "img,pistachio".
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0.  Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs.  Required
+propertis:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,interaptiv".
+ - reg: CPU number.
+ - clocks: Must include the CPU clock.  See ../../clock/clock-bindings.txt for
+   details on clock bindings.
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			reg = <0>;
+			clocks = <&clk_core CLK_MIPS>;
+		};
+	};
+
+
+Boot protocol:
+--------------
+In accordance with the MIPS UHI specification[1], the bootloader must pass the
+following arguments to the kernel:
+ - $a0: -2.
+ - $a1: KSEG0 address of the flattened device-tree blob.
+
+[1] http://prplfoundation.org/wiki/MIPS_documentation
diff --git a/Documentation/devicetree/bindings/mips/img/xilfpga.txt b/Documentation/devicetree/bindings/mips/img/xilfpga.txt
new file mode 100644
index 0000000000..57e7ee9421
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/img/xilfpga.txt
@@ -0,0 +1,83 @@
+Imagination University Program MIPSfpga
+=======================================
+
+Under the Imagination University Program, a microAptiv UP core has been
+released for academic usage.
+
+As we are dealing with a MIPS core instantiated on an FPGA, specifications
+are fluid and can be varied in RTL.
+
+This binding document is provided as baseline guidance for the example
+project provided by IMG.
+
+The example project runs on the Nexys4DDR board by Digilent powered by
+the ARTIX-7 FPGA by Xilinx.
+
+Relevant details about the example project and the Nexys4DDR board:
+
+- microAptiv UP core m14Kc
+- 50MHz clock speed
+- 128Mbyte DDR RAM	at 0x0000_0000
+- 8Kbyte RAM		at 0x1000_0000
+- axi_intc		at 0x1020_0000
+- axi_uart16550		at 0x1040_0000
+- axi_gpio		at 0x1060_0000
+- axi_i2c		at 0x10A0_0000
+- custom_gpio		at 0x10C0_0000
+- axi_ethernetlite	at 0x10E0_0000
+- 8Kbyte BootRAM	at 0x1FC0_0000
+
+Required properties:
+--------------------
+ - compatible: Must include "digilent,nexys4ddr","img,xilfpga".
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0. Required properties:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mips,m14Kc".
+ - reg: Must be <0>.
+ - clocks: phandle to ext clock for fixed-clock received by MIPS core.
+
+Example:
+
+	compatible = "img,xilfpga","digilent,nexys4ddr";
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,m14Kc";
+			reg = <0>;
+			clocks	= <&ext>;
+		};
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+Boot protocol:
+--------------
+
+The BootRAM is a writeable "RAM" in FPGA at 0x1FC0_0000.
+This is for easy reprogrammibility via JTAG.
+
+The BootRAM initializes the cache and the axi_uart peripheral.
+
+DDR initialization is already handled by a HW IP block.
+
+When the example project bitstream is loaded, the cpu_reset button
+needs to be pressed.
+
+The bootram initializes the cache and axi_uart.
+Then outputs MIPSFPGA\n\r on the serial port on the Nexys4DDR board.
+
+At this point, the board is ready to load the Linux kernel
+vmlinux file via JTAG.
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
new file mode 100644
index 0000000000..f2e822afe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ingenic/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic XBurst based Platforms
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  Devices with a Ingenic XBurst CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Qi Hardware Ben NanoNote
+        items:
+          - const: qi,lb60
+          - const: ingenic,jz4740
+
+      - description: YLM RetroMini RS-90
+        items:
+          - const: ylm,rs90
+          - const: ingenic,jz4725b
+
+      - description: Game Consoles Worldwide GCW Zero
+        items:
+          - const: gcw,zero
+          - const: ingenic,jz4770
+
+      - description: MIPS Creator CI20
+        items:
+          - const: img,ci20
+          - const: ingenic,jz4780
+
+      - description: YSH & ATIL General Board, CU1000 Module with Neo Backplane
+        items:
+          - const: yna,cu1000-neo
+          - const: ingenic,x1000e
+
+      - description: YSH & ATIL General Board, CU1830 Module with Neo Backplane
+        items:
+          - const: yna,cu1830-neo
+          - const: ingenic,x1830
+
+      - description: YSH & ATIL General Board, CU2000 Module with Neo Backplane
+        items:
+          - const: yna,cu2000-neo
+          - const: ingenic,x2000e
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt b/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt
new file mode 100644
index 0000000000..0a2df43383
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt
@@ -0,0 +1,31 @@
+Lantiq XWAY SoC FPI BUS binding
+============================
+
+
+-------------------------------------------------------------------------------
+Required properties:
+- compatible			: Should be one of
+					"lantiq,xrx200-fpi"
+- reg				: The address and length of the XBAR
+				  configuration register.
+				  Address and length of the FPI bus itself.
+- lantiq,rcu			: A phandle to the RCU syscon
+- lantiq,offset-endianness	: Offset of the endianness configuration
+				  register
+
+-------------------------------------------------------------------------------
+Example for the FPI on the xrx200 SoCs:
+	fpi@10000000 {
+		compatible = "lantiq,xrx200-fpi";
+		ranges = <0x0 0x10000000 0xf000000>;
+		reg =	<0x1f400000 0x1000>,
+			<0x10000000 0xf000000>;
+		lantiq,rcu = <&rcu0>;
+		lantiq,offset-endianness = <0x4c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gptu@e100a00 {
+			......
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml
new file mode 100644
index 0000000000..d5805725be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,cgu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoC series Clock Generation Unit (CGU)
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,cgu-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cgu@103000 {
+        compatible = "lantiq,cgu-xway";
+        reg = <0x103000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
new file mode 100644
index 0000000000..15d41bdbdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,dma-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoCs DMA Controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,dma-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@e104100 {
+        compatible = "lantiq,dma-xway";
+        reg = <0xe104100 0x800>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml
new file mode 100644
index 0000000000..0fada1f085
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,ebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoC series External Bus Unit (EBU)
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,ebu-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ebu@105300 {
+        compatible = "lantiq,ebu-xway";
+        reg = <0x105300 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,pmu.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,pmu.yaml
new file mode 100644
index 0000000000..4982b458ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,pmu.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/lantiq/lantiq,pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway SoC series Power Management Unit (PMU)
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lantiq,pmu-xway
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmu@102000 {
+        compatible = "lantiq,pmu-xway";
+        reg = <0x102000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
new file mode 100644
index 0000000000..8ec6191c17
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -0,0 +1,69 @@
+Lantiq XWAY SoC RCU binding
+===========================
+
+This binding describes the RCU (reset controller unit) multifunction device,
+where each sub-device has its own set of registers.
+
+The RCU register range is used for multiple purposes. Mostly one device
+uses one or multiple register exclusively, but for some registers some
+bits are for one driver and some other bits are for a different driver.
+With this patch all accesses to the RCU registers will go through
+syscon.
+
+
+-------------------------------------------------------------------------------
+Required properties:
+- compatible	: The first and second values must be:
+		  "lantiq,xrx200-rcu", "simple-mfd", "syscon"
+- reg		: The address and length of the system control registers
+
+
+-------------------------------------------------------------------------------
+Example of the RCU bindings on a xRX200 SoC:
+	rcu0: rcu@203000 {
+		compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
+		reg = <0x203000 0x100>;
+		ranges = <0x0 0x203000 0x100>;
+		big-endian;
+
+		reset0: reset-controller@10 {
+			compatible = "lantiq,xrx200-reset";
+			reg = <0x10 4>, <0x14 4>;
+
+			#reset-cells = <2>;
+		};
+
+		reset1: reset-controller@48 {
+			compatible = "lantiq,xrx200-reset";
+			reg = <0x48 4>, <0x24 4>;
+
+			#reset-cells = <2>;
+		};
+
+		usb_phy0: usb2-phy@18 {
+			compatible = "lantiq,xrx200-usb2-phy";
+			reg = <0x18 4>, <0x38 4>;
+
+			resets = <&reset1 4 4>, <&reset0 4 4>;
+			reset-names = "phy", "ctrl";
+			#phy-cells = <0>;
+		};
+
+		usb_phy1: usb2-phy@34 {
+			compatible = "lantiq,xrx200-usb2-phy";
+			reg = <0x34 4>, <0x3C 4>;
+
+			resets = <&reset1 5 4>, <&reset0 4 4>;
+			reset-names = "phy", "ctrl";
+			#phy-cells = <0>;
+		};
+
+		reboot@10 {
+			compatible = "syscon-reboot";
+			reg = <0x10 4>;
+
+			regmap = <&rcu0>;
+			offset = <0x10>;
+			mask = <0x40000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
new file mode 100644
index 0000000000..099e40e148
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson based Platforms
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+description: |
+  Devices with a Loongson CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Classic Loongson64 Quad Core + LS7A
+        items:
+          - const: loongson,loongson64c-4core-ls7a
+
+      - description: Classic Loongson64 Quad Core + RS780E
+        items:
+          - const: loongson,loongson64c-4core-rs780e
+
+      - description: Classic Loongson64 Octa Core + RS780E
+        items:
+          - const: loongson,loongson64c-8core-rs780e
+
+      - description: Generic Loongson64 Quad Core + LS7A
+        items:
+          - const: loongson,loongson64g-4core-ls7a
+
+      - description: Virtual Loongson64 Quad Core + VirtIO
+        items:
+          - const: loongson,loongson64v-4core-virtio
+
+      - description: LS1B based boards
+        items:
+          - enum:
+              - loongson,lsgz-1b-dev
+          - const: loongson,ls1b
+
+      - description: LS1C based boards
+        items:
+          - enum:
+              - loongmasses,smartloong-1c
+          - const: loongson,ls1c
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
new file mode 100644
index 0000000000..358ac8cd4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
new file mode 100644
index 0000000000..3e3a3705e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson RS780E PCH ACPI Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This controller can be found in Loongson-3 systems with RS780E PCH.
+
+properties:
+  compatible:
+    const: loongson,rs780e-acpi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    isa@0 {
+      compatible = "isa";
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <1 0 0 0x1000>;
+
+      acpi@800 {
+        compatible = "loongson,rs780e-acpi";
+        reg = <1 0x800 0x100>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
new file mode 100644
index 0000000000..cc916eaeed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -0,0 +1,59 @@
+* Microsemi MIPS CPUs
+
+Boards with a SoC of the Microsemi MIPS family shall have the following
+properties:
+
+Required properties:
+- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
+
+
+* Other peripherals:
+
+o CPU chip regs:
+
+The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous
+functionalities: chip ID, general purpose register for software use, reset
+controller, hardware status and configuration, efuses.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@71070000 {
+		compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
+		reg = <0x71070000 0x1c>;
+	};
+
+
+o CPU system control:
+
+The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
+the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
+endianness, CPU bus control, CPU status.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@70000000 {
+		compatible = "mscc,ocelot-cpu-syscon", "syscon";
+		reg = <0x70000000 0x2c>;
+	};
+
+o HSIO regs:
+
+The SoC has a few registers (HSIO) handling miscellaneous functionalities:
+configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
+status, SerDes muxing and a thermal sensor.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
+- reg : Should contain registers location and length
+
+Example:
+	syscon@10d0000 {
+		compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+		reg = <0x10d0000 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/mips/ni.txt b/Documentation/devicetree/bindings/mips/ni.txt
new file mode 100644
index 0000000000..722bf2d62d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ni.txt
@@ -0,0 +1,7 @@
+National Instruments MIPS platforms
+
+required root node properties:
+	- compatible: must be "ni,169445"
+
+CPU Nodes
+	- compatible: must be "mti,mips14KEc"
diff --git a/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt b/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
new file mode 100644
index 0000000000..1c8dbc45fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/pic32/microchip,pic32mzda.txt
@@ -0,0 +1,31 @@
+* Microchip PIC32MZDA Platforms
+
+PIC32MZDA Starter Kit
+Required root node properties:
+    - compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda"
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required.  Required properties:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,mips14KEc".
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,mips14KEc";
+		};
+	};
+
+Boot protocol
+--------------
+In accordance with Unified Hosting Interface Reference Manual (MD01069), the
+bootloader must pass the following arguments to the kernel:
+ - $a0: -2.
+ - $a1: KSEG0 address of the flattened device-tree blob.
diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml
new file mode 100644
index 0000000000..53c1f66353
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ralink.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ralink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoC based Platforms
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+    Boards with a Ralink SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Boards with Ralink RT2880 SoC
+        items:
+          - enum:
+              - ralink,rt2880-eval-board
+          - const: ralink,rt2880-soc
+
+      - description: Boards with Ralink RT3050 SoC
+        items:
+          - const: ralink,rt3050-soc
+
+      - description: Boards with Ralink RT3052 SoC
+        items:
+          - enum:
+              - ralink,rt3052-eval-board
+          - const: ralink,rt3052-soc
+
+      - description: Boards with Ralink RT3350 SoC
+        items:
+          - const: ralink,rt3350-soc
+
+      - description: Boards with Ralink RT3352 SoC
+        items:
+          - const: ralink,rt3352-soc
+
+      - description: Boards with Ralink RT3383 SoC
+        items:
+          - enum:
+              - ralink,rt3883-eval-board
+          - const: ralink,rt3383-soc
+
+      - description: Boards with Ralink RT5350 SoC
+        items:
+          - const: ralink,rt5350-soc
+
+      - description: Boards with Mediatek/Ralink MT7620A SoC
+        items:
+          - enum:
+              - ralink,mt7620a-eval-board
+          - const: ralink,mt7620a-soc
+
+      - description: Boards with Mediatek/Ralink MT7620N SoC
+        items:
+          - const: ralink,mt7620n-soc
+
+      - description: Boards with Mediatek/Ralink MT7628A SoC
+        items:
+          - enum:
+              - onion,omega2+
+              - vocore,vocore2
+          - const: ralink,mt7628a-soc
+
+      - description: Boards with Mediatek/Ralink MT7688A SoC
+        items:
+          - enum:
+              - gardena,smart-gateway-mt7688
+              - onion,omega2+
+          - const: ralink,mt7628a-soc
+
+      - description: Boards with Mediatek/Ralink MT7621 SoC
+        items:
+          - enum:
+              - gnubee,gb-pc1
+              - gnubee,gb-pc2
+              - tplink,hc220-g5-v1
+          - const: mediatek,mt7621-soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
new file mode 100644
index 0000000000..f8ac309d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/realtek-rtl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL83xx/93xx SoC series
+
+maintainers:
+  - Bert Vermeulen <bert@biot.com>
+  - Sander Vanheule <sander@svanheule.net>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      # RTL8382-based boards
+      - items:
+          - enum:
+              - cisco,sg220-26
+          - const: realtek,rtl8382-soc
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/misc/aspeed,cvic.txt b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt
new file mode 100644
index 0000000000..d62c783d1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/aspeed,cvic.txt
@@ -0,0 +1,35 @@
+* ASPEED AST2400 and AST2500 coprocessor interrupt controller
+
+This file describes the bindings for the interrupt controller present
+in the AST2400 and AST2500 BMC SoCs which provides interrupt to the
+ColdFire coprocessor.
+
+It is not a normal interrupt controller and it would be rather
+inconvenient to create an interrupt tree for it as it somewhat shares
+some of the same sources as the main ARM interrupt controller but with
+different numbers.
+
+The AST2500 supports a SW generated interrupt
+
+Required properties:
+- reg: address and length of the register for the device.
+- compatible: "aspeed,cvic" and one of:
+		"aspeed,ast2400-cvic"
+	      or
+		"aspeed,ast2500-cvic"
+
+- valid-sources: One cell, bitmap of supported sources for the implementation
+
+Optional properties;
+- copro-sw-interrupts: List of interrupt numbers that can be used as
+		       SW interrupts from the ARM to the coprocessor.
+		       (AST2500 only)
+
+Example:
+
+	cvic: copro-interrupt-controller@1e6c2000 {
+		compatible = "aspeed,ast2500-cvic";
+		valid-sources = <0xffffffff>;
+		copro-sw-interrupts = <1>;
+		reg = <0x1e6c2000 0x80>;
+	};
diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
new file mode 100644
index 0000000000..f2e2e28b31
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
@@ -0,0 +1,46 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
+======================================================================
+
+The bridge is available on platforms with the VGA enabled on the Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory.  The BMC can disable this bridge.  If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+	- "aspeed,ast2400-p2a-ctrl"
+	- "aspeed,ast2500-p2a-ctrl"
+
+Optional properties:
+===================
+
+- reg: A hint for the memory regions associated with the P2A controller
+- memory-region: A phandle to a reserved_memory region to be used for the PCI
+		to AHB mapping
+
+The p2a-control node should be the child of a syscon node with the required
+property:
+
+- compatible : Should be one of the following:
+		"aspeed,ast2400-scu", "syscon", "simple-mfd"
+		"aspeed,ast2500-scu", "syscon", "simple-mfd"
+
+Example
+===================
+
+g4 Example
+----------
+
+syscon: scu@1e6e2000 {
+	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+	reg = <0x1e6e2000 0x1a8>;
+
+	p2a: p2a-control {
+		compatible = "aspeed,ast2400-p2a-ctrl";
+		memory-region = <&reserved_memory>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
new file mode 100644
index 0000000000..f9fb412642
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -0,0 +1,50 @@
+* Atmel SSC driver.
+
+Required properties:
+- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc"
+	- atmel,at91rm9200-ssc: support pdc transfer
+	- atmel,at91sam9g45-ssc: support dma transfer
+- reg: Should contain SSC registers location and length
+- interrupts: Should contain SSC interrupt
+- clock-names: tuple listing input clock names.
+	Required elements: "pclk"
+- clocks: phandles to input clocks.
+
+
+Required properties for devices compatible with "atmel,at91sam9g45-ssc":
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+  the memory interface and SSC DMA channel ID (for tx and rx).
+  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
+
+Optional properties:
+  - atmel,clk-from-rk-pin: bool property.
+     - When SSC works in slave mode, according to the hardware design, the
+       clock can get from TK pin, and also can get from RK pin. So, add
+       this parameter to choose where the clock from.
+     - By default the clock is from TK pin, if the clock from RK pin, this
+       property is needed.
+  - #sound-dai-cells: Should contain <0>.
+     - This property makes the SSC into an automatically registered DAI.
+
+Examples:
+- PDC transfer:
+ssc0: ssc@fffbc000 {
+	compatible = "atmel,at91rm9200-ssc";
+	reg = <0xfffbc000 0x4000>;
+	interrupts = <14 4 5>;
+	clocks = <&ssc0_clk>;
+	clock-names = "pclk";
+};
+
+- DMA transfer:
+ssc0: ssc@f0010000 {
+      compatible = "atmel,at91sam9g45-ssc";
+      reg = <0xf0010000 0x4000>;
+      interrupts = <28 4 5>;
+      dmas = <&dma0 1 13>,
+	     <&dma0 1 14>;
+      dma-names = "tx", "rx";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+};
diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
new file mode 100644
index 0000000000..8cc951feb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/fsl,dpaa2-console.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPAA2 console support
+
+maintainers:
+  - Laurentiu Tudor <laurentiu.tudor@nxp.com>
+
+properties:
+  compatible:
+    const: "fsl,dpaa2-console"
+
+  reg:
+    maxItems: 1
+    description: A standard property. Specifies the region where the MCFBA
+                (MC firmware base address) register can be found.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
new file mode 100644
index 0000000000..7b486d4985
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@@ -0,0 +1,196 @@
+* Freescale Management Complex
+
+The Freescale Management Complex (fsl-mc) is a hardware resource
+manager that manages specialized hardware objects used in
+network-oriented packet processing applications. After the fsl-mc
+block is enabled, pools of hardware resources are available, such as
+queues, buffer pools, I/O interfaces. These resources are building
+blocks that can be used to create functional hardware objects/devices
+such as network interfaces, crypto accelerator instances, L2 switches,
+etc.
+
+For an overview of the DPAA2 architecture and fsl-mc bus see:
+Documentation/networking/device_drivers/ethernet/freescale/dpaa2/overview.rst
+
+As described in the above overview, all DPAA2 objects in a DPRC share the
+same hardware "isolation context" and a 10-bit value called an ICID
+(isolation context id) is expressed by the hardware to identify
+the requester.
+
+The generic 'iommus' property is insufficient to describe the relationship
+between ICIDs and IOMMUs, so an iommu-map property is used to define
+the set of possible ICIDs under a root DPRC and how they map to
+an IOMMU.
+
+For generic IOMMU bindings, see
+Documentation/devicetree/bindings/iommu/iommu.txt.
+
+For arm-smmu binding, see:
+Documentation/devicetree/bindings/iommu/arm,smmu.yaml.
+
+The MSI writes are accompanied by sideband data which is derived from the ICID.
+The msi-map property is used to associate the devices with both the ITS
+controller and the sideband data which accompanies the writes.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+For GICv3 and GIC ITS bindings, see:
+Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml.
+
+Required properties:
+
+    - compatible
+        Value type: <string>
+        Definition: Must be "fsl,qoriq-mc".  A Freescale Management Complex
+                    compatible with this binding must have Block Revision
+                    Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+                    the MC control register region.
+
+    - reg
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Specifies one or two regions
+                    defining the MC's registers:
+
+                       -the first region is the command portal for the
+                        this machine and must always be present
+
+                       -the second region is the MC control registers. This
+                        region may not be present in some scenarios, such
+                        as in the device tree presented to a virtual machine.
+
+    - ranges
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Defines the mapping between the child
+                    MC address space and the parent system address space.
+
+                    The MC address space is defined by 3 components:
+                       <region type> <offset hi> <offset lo>
+
+                    Valid values for region type are
+                       0x0 - MC portals
+                       0x1 - QBMAN portals
+
+    - #address-cells
+        Value type: <u32>
+        Definition: Must be 3.  (see definition in 'ranges' property)
+
+    - #size-cells
+        Value type: <u32>
+        Definition: Must be 1.
+
+Sub-nodes:
+
+        The fsl-mc node may optionally have dpmac sub-nodes that describe
+        the relationship between the Ethernet MACs which belong to the MC
+        and the Ethernet PHYs on the system board.
+
+        The dpmac nodes must be under a node named "dpmacs" which contains
+        the following properties:
+
+            - #address-cells
+              Value type: <u32>
+              Definition: Must be present if dpmac sub-nodes are defined and must
+                          have a value of 1.
+
+            - #size-cells
+              Value type: <u32>
+              Definition: Must be present if dpmac sub-nodes are defined and must
+                          have a value of 0.
+
+        These nodes must have the following properties:
+
+            - compatible
+              Value type: <string>
+              Definition: Must be "fsl,qoriq-mc-dpmac".
+
+            - reg
+              Value type: <prop-encoded-array>
+              Definition: Specifies the id of the dpmac.
+
+            - phy-handle
+              Value type: <phandle>
+              Definition: Specifies the phandle to the PHY device node associated
+                          with the this dpmac.
+Optional properties:
+
+- iommu-map: Maps an ICID to an IOMMU and associated iommu-specifier
+  data.
+
+  The property is an arbitrary number of tuples of
+  (icid-base,iommu,iommu-base,length).
+
+  Any ICID i in the interval [icid-base, icid-base + length) is
+  associated with the listed IOMMU, with the iommu-specifier
+  (i - icid-base + iommu-base).
+
+- msi-map: Maps an ICID to a GIC ITS and associated msi-specifier
+  data.
+
+  The property is an arbitrary number of tuples of
+  (icid-base,gic-its,msi-base,length).
+
+  Any ICID in the interval [icid-base, icid-base + length) is
+  associated with the listed GIC ITS, with the msi-specifier
+  (i - icid-base + msi-base).
+
+Deprecated properties:
+
+    - msi-parent
+        Value type: <phandle>
+        Definition: Describes the MSI controller node handling message
+                    interrupts for the MC. When there is no translation
+                    between the ICID and deviceID this property can be used
+                    to describe the MSI controller used by the devices on the
+                    mc-bus.
+                    The use of this property for mc-bus is deprecated. Please
+                    use msi-map.
+
+Example:
+
+        smmu: iommu@5000000 {
+               compatible = "arm,mmu-500";
+               #iommu-cells = <1>;
+               stream-match-mask = <0x7C00>;
+               ...
+        };
+
+        gic: interrupt-controller@6000000 {
+               compatible = "arm,gic-v3";
+               ...
+        }
+        its: gic-its@6020000 {
+               compatible = "arm,gic-v3-its";
+               msi-controller;
+               ...
+        };
+
+        fsl_mc: fsl-mc@80c000000 {
+                compatible = "fsl,qoriq-mc";
+                reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+                      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+                /* define map for ICIDs 23-64 */
+                iommu-map = <23 &smmu 23 41>;
+                /* define msi map for ICIDs 23-64 */
+                msi-map = <23 &its 23 41>;
+                #address-cells = <3>;
+                #size-cells = <1>;
+
+                /*
+                 * Region type 0x0 - MC portals
+                 * Region type 0x1 - QBMAN portals
+                 */
+                ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+                          0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+                dpmacs {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    dpmac@1 {
+                        compatible = "fsl,qoriq-mc-dpmac";
+                        reg = <1>;
+                        phy-handle = <&mdio0_phy0>;
+                    }
+                }
+        };
diff --git a/Documentation/devicetree/bindings/misc/ge-achc.yaml b/Documentation/devicetree/bindings/misc/ge-achc.yaml
new file mode 100644
index 0000000000..ff07aa62ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ge-achc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+# Copyright (C) 2021 GE Inc.
+# Copyright (C) 2021 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ge-achc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE Healthcare USB Management Controller
+
+description: |
+  A device which handles data acquisition from compatible USB based peripherals.
+  SPI is used for device management.
+
+  Note: This device does not expose the peripherals as USB devices.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: ge,achc
+      - const: nxp,kinetis-k20
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital power supply regulator on VDD pin
+
+  vdda-supply:
+    description: Analog power supply regulator on VDDA pin
+
+  reg:
+    items:
+      - description: Control interface
+      - description: Firmware programming interface
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@1 {
+            compatible = "ge,achc", "nxp,kinetis-k20";
+            reg = <1>, <0>;
+            clocks = <&achc_24M>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml b/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml
new file mode 100644
index 0000000000..452236e793
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/idt,89hpesx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: '^idt,89hpes'
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - pattern: '^idt,89hpes(8nt2|12nt3|12n3a?|24n3a?|(12|24)t3g2|4t4g2|10t4g2|[56]t5|8t5a?)$'
+      - pattern: '^idt,89hpes(6t6g2|16t7|(24t6|32t8|48t12|16t4a?)(g2)?)$'
+      - pattern: '^idt,89hpes(24nt6a|32nt8[ab]|12nt12|16nt16|24nt24|32nt24[ab])g2$'
+      - pattern: '^idt,89hpes((32h8|48h12a?|22h16|34h16|64h16a?)(g2)?|16h16)$'
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+  
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^eeprom@':
+    $ref: /schemas/eeprom/at24.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        description: Only a subset of devices are supported
+        pattern: ',24c(32|64|128|256|512)$'
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        idt@74 {
+            compatible = "idt,89hpes32nt8ag2";
+            reg = <0x74>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@50 {
+                compatible = "atmel,24c64";
+                reg = <0x50>;
+                read-only;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt
new file mode 100644
index 0000000000..5bdfffb0b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt
@@ -0,0 +1,41 @@
+IFM camera sensor interface on mpc5200 LocalPlus bus
+
+Required properties:
+- compatible: "ifm,o2d-csi"
+- reg: specifies sensor chip select number and associated address range
+- interrupts: external interrupt line number and interrupt sense mode
+  of the interrupt line signaling frame valid events
+- gpios: three gpio-specifiers for "capture", "reset" and "master enable"
+  GPIOs (strictly in this order).
+- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor
+  clock generator. This node is usually a general purpose timer controller.
+- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25)
+- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16)
+- ifm,csi-wait-cycles: sensor bus wait cycles
+
+Optional properties:
+- ifm,csi-byte-swap: if this property is present, the byte swapping on
+  the bus will be enabled.
+
+Example:
+
+	csi@3,0 {
+		compatible = "ifm,o2d-csi";
+		reg = <3 0 0x00100000>;		/* CS 3, 1 MiB range */
+		interrupts = <1 1 2>;		/* IRQ1, edge falling */
+
+		ifm,csi-clk-handle = <&timer7>;
+		gpios = <&gpio_simple 23 0	/* image_capture */
+			 &gpio_simple 26 0	/* image_reset */
+			 &gpio_simple 29 0>;	/* image_master_en */
+
+		ifm,csi-addr-bus-width = <24>;
+		ifm,csi-data-bus-width = <8>;
+		ifm,csi-wait-cycles = <0>;
+	};
+
+The base address of the used chip select is specified in the
+ranges property of the parent localbus node, for example:
+
+	ranges = <0 0 0xff000000 0x01000000
+		  3 0 0xe3000000 0x00100000>;
diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
new file mode 100644
index 0000000000..36a9dbdf3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx AHB Queue Manager
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The IXP4xx AHB Queue Manager maintains queues as circular buffers in
+  an 8KB embedded SRAM along with hardware pointers. It is used by both
+  the XScale processor and the NPEs (Network Processing Units) in the
+  IXP4xx for accelerating queues, especially for networking. Clients pick
+  queues from the queue manager with foo-queue = <&qmgr N> where the
+  &qmgr is a phandle to the queue manager and N is the queue resource
+  number. The queue resources available and their specific purpose
+  on a certain IXP4xx system will vary.
+
+properties:
+  compatible:
+    items:
+      - const: intel,ixp4xx-ahb-queue-manager
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for queues 0-31
+      - description: Interrupt for queues 32-63
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    qmgr: queue-manager@60000000 {
+         compatible = "intel,ixp4xx-ahb-queue-manager";
+         reg = <0x60000000 0x4000>;
+         interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
new file mode 100644
index 0000000000..d6a8c188c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
@@ -0,0 +1,26 @@
+* Liebherr's BK4 controller external SPI
+
+A device which handles data acquisition from compatible industrial
+peripherals.
+The SPI is used for data and management purposes in both master and
+slave modes.
+
+Required properties:
+
+- compatible : Should be "lwn,bk4"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+  the controller.
+
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
+  30MHz at most for the Liebherr's BK4 external bus.
+
+Example:
+
+spidev0: spi@0 {
+	compatible = "lwn,bk4";
+	spi-max-frequency = <30000000>;
+	reg = <0>;
+};
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml
new file mode 100644
index 0000000000..cacb845868
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra186-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) MISC register block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The MISC register block found on Tegra186 and later SoCs contains
+  registers that can be used to identify a given chip and various strapping
+  options.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-misc
+      - nvidia,tegra194-misc
+      - nvidia,tegra234-misc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    misc@100000 {
+        compatible = "nvidia,tegra186-misc";
+        reg = <0x00100000 0xf000>,
+              <0x0010f000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml
new file mode 100644
index 0000000000..6f504fa740
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra20-apbmisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra APBMISC block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra210-apbmisc
+              - nvidia,tegra124-apbmisc
+              - nvidia,tegra114-apbmisc
+              - nvidia,tegra30-apbmisc
+          - const: nvidia,tegra20-apbmisc
+
+      - items:
+          - const: nvidia,tegra20-apbmisc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+  nvidia,long-ram-code:
+    description: If present, the RAM code is long (4 bit). If not, short
+      (2 bit).
+    type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    apbmisc@70000800 {
+        compatible = "nvidia,tegra20-apbmisc";
+        reg = <0x70000800 0x64>, /* Chip revision */
+              <0x70000008 0x04>; /* Strapping options */
+    };
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
new file mode 100644
index 0000000000..e99342f268
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC XO-1.75 Embedded Controller
+
+description: |
+  This binding describes the Embedded Controller acting as a SPI bus master
+  on a OLPC XO-1.75 laptop computer.
+
+  The embedded controller requires the SPI controller driver to signal
+  readiness to receive a transfer (that is, when TX FIFO contains the
+  response data) by strobing the ACK pin with the ready signal. See the
+  "ready-gpios" property of the SSP binding as documented in:
+  <Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml>.
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: olpc,xo1.75-ec
+
+  cmd-gpios:
+    description: GPIO uspecifier of the CMD pin
+    maxItems: 1
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - cmd-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      spi-slave;
+      #address-cells = <0>;
+      #size-cells = <0>;
+      ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>;
+
+      slave {
+        compatible = "olpc,xo1.75-ec";
+        spi-cpha;
+        cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt
new file mode 100644
index 0000000000..985e907367
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/pvpanic-mmio.txt
@@ -0,0 +1,29 @@
+* QEMU PVPANIC MMIO Configuration bindings
+
+QEMU's emulation / virtualization targets provide the following PVPANIC
+MMIO Configuration interface on the "virt" machine.
+type:
+
+- a read-write, 16-bit wide data register.
+
+QEMU exposes the data register to guests as memory mapped registers.
+
+Required properties:
+
+- compatible: "qemu,pvpanic-mmio".
+- reg: the MMIO region used by the device.
+  * Bytes 0x0  Write panic event to the reg when guest OS panics.
+  * Bytes 0x1  Reserved.
+
+Example:
+
+/ {
+        #size-cells = <0x2>;
+        #address-cells = <0x2>;
+
+        pvpanic-mmio@9060000 {
+                compatible = "qemu,pvpanic-mmio";
+                reg = <0x0 0x9060000 0x0 0x2>;
+        };
+};
+
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
new file mode 100644
index 0000000000..2dc3e245fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qcom,fastrpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm FastRPC Driver
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The FastRPC implements an IPC (Inter-Processor Communication)
+  mechanism that allows for clients to transparently make remote method
+  invocations across DSP and APPS boundaries. This enables developers
+  to offload tasks to the DSP and free up the application processor for
+  other tasks.
+
+properties:
+  compatible:
+    const: qcom,fastrpc
+
+  label:
+    enum:
+      - adsp
+      - mdsp
+      - sdsp
+      - cdsp
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for remote heap CMA.
+
+  qcom,glink-channels:
+    description:
+      A list of channels tied to this function, used for matching
+      the function to a set of virtual channels.
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - const: fastrpcglink-apps-dsp
+
+  qcom,non-secure-domain:
+    description:
+      Used to mark the current domain as non-secure.
+    type: boolean
+
+  qcom,smd-channels:
+    description:
+      Channel name used for the RPM communication
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - const: fastrpcsmd-apps-dsp
+
+  qcom,vmids:
+    description:
+      Virtual machine IDs for remote processor.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "(compute-)?cb@[0-9]*$":
+    type: object
+
+    description: >
+      Each subnode of the Fastrpc represents compute context banks available on the dsp.
+
+    properties:
+      compatible:
+        const: qcom,fastrpc-compute-cb
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 3
+
+      qcom,nsessions:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 1
+        description: >
+          A value indicating how many sessions can share this context bank.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - label
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    glink-edge {
+        interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                     IPCC_MPROC_SIGNAL_GLINK_QMP
+                                     IRQ_TYPE_EDGE_RISING>;
+        mboxes = <&ipcc IPCC_CLIENT_LPASS
+                        IPCC_MPROC_SIGNAL_GLINK_QMP>;
+        label = "lpass";
+        qcom,remote-pid = <2>;
+
+        fastrpc {
+            compatible = "qcom,fastrpc";
+            qcom,glink-channels = "fastrpcglink-apps-dsp";
+            label = "sdsp";
+            qcom,non-secure-domain;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compute-cb@1 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <1>;
+                iommus = <&apps_smmu 0x0541 0x0>;
+            };
+
+            compute-cb@2 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <2>;
+                iommus = <&apps_smmu 0x0542 0x0>;
+            };
+
+            compute-cb@3 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <3>;
+                iommus = <&apps_smmu 0x0543 0x0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
new file mode 100644
index 0000000000..1aebeb696e
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qemu,vcpu-stall-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VCPU stall detector
+
+description:
+  This binding describes a CPU stall detector mechanism for virtual CPUs
+  which is accessed through MMIO.
+
+maintainers:
+  - Sebastian Ene <sebastianene@google.com>
+
+properties:
+  compatible:
+    enum:
+      - qemu,vcpu-stall-detector
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The internal clock of the stall detector peripheral measure in Hz used
+      to decrement its internal counter register on each tick.
+      Defaults to 10 if unset.
+    default: 10
+
+  timeout-sec:
+    description: |
+      The stall detector expiration timeout measured in seconds.
+      Defaults to 8 if unset. Please note that it also takes into account the
+      time spent while the VCPU is not running.
+    default: 8
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vmwdt@9030000 {
+      compatible = "qemu,vcpu-stall-detector";
+      reg = <0x9030000 0x10000>;
+      clock-frequency = <10>;
+      timeout-sec = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
new file mode 100644
index 0000000000..0c9a844484
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+  - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+  The ESM (Error Signaling Module) is an IP block on TI K3 devices
+  that allows handling of safety events somewhat similar to what interrupt
+  controller would do. The safety signals have their separate paths within
+  the SoC, and they are handled by the ESM, which routes them to the proper
+  destination, which can be system reset, interrupt controller, etc. In the
+  simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+  compatible:
+    const: ti,j721e-esm
+
+  reg:
+    maxItems: 1
+
+  ti,esm-pins:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      integer array of ESM interrupt pins to route to external event pin
+      which can be used to reset the SoC.
+    minItems: 1
+    maxItems: 255
+
+required:
+  - compatible
+  - reg
+  - ti,esm-pins
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        esm@700000 {
+            compatible = "ti,j721e-esm";
+            reg = <0x0 0x700000 0x0 0x1000>;
+            ti,esm-pins = <344>, <345>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
new file mode 100644
index 0000000000..e3289634fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
@@ -0,0 +1,58 @@
+* Xilinx SDFEC(16nm) IP *
+
+The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+which provides high-throughput LDPC and Turbo Code implementations.
+The LDPC decode & encode functionality is capable of covering a range of
+customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+principally covers codes used by LTE. The FEC Engine offers significant
+power and area savings versus implementations done in the FPGA fabric.
+
+
+Required properties:
+- compatible: Must be "xlnx,sd-fec-1.1"
+- clock-names : List of input clock names from the following:
+    - "core_clk", Main processing clock for processing core (required)
+    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
+    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
+    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
+    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
+    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
+    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
+    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
+- clocks : Clock phandles (see clock_bindings.txt for details).
+- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
+  location and length.
+- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
+  being used.
+- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
+  driven with a fixed value and is not present on the device, a value of 1
+  configures the DIN_WORDS to be block based, while a value of 2 configures the
+  DIN_WORDS input to be supplied for each AXI transaction.
+- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
+  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+  of "4x128b".
+- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
+  driven with a fixed value and is not present on the device, a value of 1
+  configures the DOUT_WORDS to be block based, while a value of 2 configures the
+  DOUT_WORDS input to be supplied for each AXI transaction.
+- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
+  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+  of "4x128b".
+Optional properties:
+- interrupts: should contain SDFEC interrupt number
+
+Example
+---------------------------------------
+	sd_fec_0: sd-fec@a0040000 {
+		compatible = "xlnx,sd-fec-1.1";
+		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
+		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
+		reg = <0x0 0xa0040000 0x0 0x40000>;
+		interrupt-parent = <&axi_intc>;
+		interrupts = <1 0>;
+		xlnx,sdfec-code = "ldpc";
+		xlnx,sdfec-din-words = <0>;
+		xlnx,sdfec-din-width = <2>;
+		xlnx,sdfec-dout-words = <0>;
+		xlnx,sdfec-dout-width = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
new file mode 100644
index 0000000000..1b6020e4ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,tmr-inject.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Triple Modular Redundancy(TMR) Inject IP
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+
+description: |
+  The Triple Modular Redundancy(TMR) Inject core provides functional fault
+  injection by changing selected MicroBlaze instructions, which provides the
+  possibility to verify that the TMR subsystem error detection and fault
+  recovery logic is working properly.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,tmr-inject-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,magic:
+    minimum: 0
+    maximum: 255
+    description: |
+      Magic number, When configured it allows the controller to perform
+      recovery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - xlnx,magic
+
+additionalProperties: false
+
+examples:
+  - |
+    fault-inject@44a30000 {
+        compatible = "xlnx,tmr-inject-1.0";
+        reg = <0x44a10000 0x10000>;
+        xlnx,magic = <0x46>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
new file mode 100644
index 0000000000..27de12147a
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,tmr-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Triple Modular Redundancy(TMR) Manager IP
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+
+description: |
+  The Triple Modular Redundancy(TMR) Manager is responsible for handling the
+  TMR subsystem state, including fault detection and error recovery. The core
+  is triplicated in each of the sub-blocks in the TMR subsystem, and provides
+  majority voting of its internal state.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,tmr-manager-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,magic1:
+    minimum: 0
+    maximum: 255
+    description:
+      Magic byte 1, When configured it allows the controller to perform
+      recovery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - xlnx,magic1
+
+additionalProperties: false
+
+examples:
+  - |
+    tmr-manager@44a10000 {
+        compatible = "xlnx,tmr-manager-1.0";
+        reg = <0x44a10000 0x10000>;
+        xlnx,magic1 = <0x46>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
new file mode 100644
index 0000000000..0ccd632d56
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MMC Controller
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-mmc
+      - const: allwinner,sun5i-a13-mmc
+      - const: allwinner,sun7i-a20-mmc
+      - const: allwinner,sun8i-a83t-emmc
+      - const: allwinner,sun9i-a80-mmc
+      - const: allwinner,sun20i-d1-mmc
+      - const: allwinner,sun50i-a64-emmc
+      - const: allwinner,sun50i-a64-mmc
+      - const: allwinner,sun50i-a100-emmc
+      - const: allwinner,sun50i-a100-mmc
+      - items:
+          - const: allwinner,sun8i-a83t-mmc
+          - const: allwinner,sun7i-a20-mmc
+      - items:
+          - const: allwinner,sun8i-r40-emmc
+          - const: allwinner,sun50i-a64-emmc
+      - items:
+          - const: allwinner,sun8i-r40-mmc
+          - const: allwinner,sun50i-a64-mmc
+      - items:
+          - const: allwinner,sun50i-h5-emmc
+          - const: allwinner,sun50i-a64-emmc
+      - items:
+          - const: allwinner,sun50i-h5-mmc
+          - const: allwinner,sun50i-a64-mmc
+      - items:
+          - const: allwinner,sun50i-h6-emmc
+          - const: allwinner,sun50i-a64-emmc
+      - items:
+          - const: allwinner,sun50i-h6-mmc
+          - const: allwinner,sun50i-a64-mmc
+      - items:
+          - const: allwinner,sun20i-d1-emmc
+          - const: allwinner,sun50i-a100-emmc
+      - items:
+          - const: allwinner,sun50i-h616-emmc
+          - const: allwinner,sun50i-a100-emmc
+      - items:
+          - const: allwinner,sun50i-h616-mmc
+          - const: allwinner,sun50i-a100-mmc
+      - items:
+          - const: allwinner,suniv-f1c100s-mmc
+          - const: allwinner,sun7i-a20-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: Output Clock
+      - description: Sample Clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: ahb
+      - const: mmc
+      - const: output
+      - const: sample
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ahb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc0: mmc@1c0f000 {
+        compatible = "allwinner,sun5i-a13-mmc";
+        reg = <0x01c0f000 0x1000>;
+        clocks = <&ahb_gates 8>, <&mmc0_clk>;
+        clock-names = "ahb", "mmc";
+        interrupts = <32>;
+        bus-width = <4>;
+        cd-gpios = <&pio 7 1 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
new file mode 100644
index 0000000000..bc403ae9e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-gx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic SD / eMMC controller for S905/GXBB family SoCs
+
+description:
+  The MMC 5.1 compliant host controller on Amlogic provides the
+  interface for SD, eMMC and SDIO devices
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-axg-mmc
+      - items:
+          - const: amlogic,meson-gx-mmc
+          - const: amlogic,meson-gxbb-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: mmc controller instance
+      - description: card detect
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: clkin0
+      - const: clkin1
+
+  resets:
+    maxItems: 1
+
+  amlogic,dram-access-quirk:
+    type: boolean
+    description:
+      set when controller's internal DMA engine cannot access the DRAM memory,
+      like on the G12A dedicated SDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc@70000 {
+        compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+        reg = <0x70000 0x2000>;
+        interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clk_mmc>, <&xtal>, <&clk_div>;
+        clock-names = "core", "clkin0", "clkin1";
+        pinctrl-0 = <&emm_pins>;
+        resets = <&reset_mmc>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
new file mode 100644
index 0000000000..1a6cda82f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SDHC controller
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
+  card interface with 1/4/8-bit bus width.
+  It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-sdhc
+          - amlogic,meson8b-sdhc
+          - amlogic,meson8m2-sdhc
+      - const: amlogic,meson-mx-sdhc
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    minItems: 1
+
+  clocks:
+    minItems: 5
+
+  clock-names:
+    items:
+      - const: clkin0
+      - const: clkin1
+      - const: clkin2
+      - const: clkin3
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sdhc: mmc@8e00 {
+      compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+      reg = <0x8e00 0x42>;
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&xtal>,
+               <&fclk_div4>,
+               <&fclk_div3>,
+               <&fclk_div5>,
+               <&sdhc_pclk>;
+      clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
new file mode 100644
index 0000000000..8765c605e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt
@@ -0,0 +1,54 @@
+* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller
+
+The highspeed MMC host controller on Amlogic SoCs provides an interface
+for MMC, SD, SDIO and SDHC types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 2.0.
+
+The hardware provides an internal "mux" which allows up to three slots
+to be controlled. Only one slot can be accessed at a time.
+
+Required properties:
+ - compatible : must be one of
+	- "amlogic,meson8-sdio"
+	- "amlogic,meson8b-sdio"
+	along with the generic "amlogic,meson-mx-sdio"
+ - reg : mmc controller base registers
+ - interrupts : mmc controller interrupt
+ - #address-cells : must be 1
+ - size-cells : must be 0
+ - clocks : phandle to clock providers
+ - clock-names : must contain "core" and "clkin"
+
+Required child nodes:
+A node for each slot provided by the MMC controller is required.
+NOTE: due to a driver limitation currently only one slot (= child node)
+      is supported!
+
+Required properties on each child node (= slot):
+ - compatible : must be "mmc-slot" (see mmc.txt within this directory)
+ - reg : the slot (or "port") ID
+
+Optional properties on each child node (= slot):
+ - bus-width : must be 1 or 4 (8-bit bus is not supported)
+ - for cd and all other additional generic mmc parameters
+   please refer to mmc.txt within this directory
+
+Examples:
+	mmc@c1108c20 {
+		compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+		reg = <0xc1108c20 0x20>;
+		interrupts = <0 28 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+		clock-names = "core", "clkin";
+
+		slot@1 {
+			compatible = "mmc-slot";
+			reg = <1>;
+
+			bus-width = <4>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
new file mode 100644
index 0000000000..3e99801f77
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -0,0 +1,316 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arasan SDHCI Controller
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arasan,sdhci-5.1
+    then:
+      required:
+        - phys
+        - phy-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-8.9a
+              - xlnx,versal-8.9a
+              - xlnx,versal-net-emmc
+    then:
+      properties:
+        clock-output-names:
+          oneOf:
+            - items:
+                - const: clk_out_sd0
+                - const: clk_in_sd0
+            - items:
+                - const: clk_out_sd1
+                - const: clk_in_sd1
+
+properties:
+  compatible:
+    oneOf:
+      - const: arasan,sdhci-8.9a                # generic Arasan SDHCI 8.9a PHY
+      - const: arasan,sdhci-4.9a                # generic Arasan SDHCI 4.9a PHY
+      - const: arasan,sdhci-5.1                 # generic Arasan SDHCI 5.1 PHY
+      - items:
+          - const: rockchip,rk3399-sdhci-5.1    # rk3399 eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: xlnx,zynqmp-8.9a             # ZynqMP SDHCI 8.9a PHY
+          - const: arasan,sdhci-8.9a
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
+      - items:
+          - const: xlnx,versal-8.9a             # Versal SDHCI 8.9a PHY
+          - const: arasan,sdhci-8.9a
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
+      - const: xlnx,versal-net-emmc     # Versal Net eMMC PHY
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
+      - items:
+          - const: intel,lgm-sdhci-5.1-emmc     # Intel LGM eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: intel,lgm-sdhci-5.1-sdxc     # Intel LGM SDXC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - items:
+          - const: intel,keembay-sdhci-5.1-emmc # Intel Keem Bay eMMC PHY
+          - const: arasan,sdhci-5.1
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - const: intel,keembay-sdhci-5.1-sd       # Intel Keem Bay SD controller
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+      - const: intel,keembay-sdhci-5.1-sdio     # Intel Keem Bay SDIO controller
+        description:
+          For this device it is strongly suggested to include
+          arasan,soc-ctl-syscon.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: clk_xin
+      - const: clk_ahb
+      - const: gate
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: phy_arasan
+
+  resets:
+    maxItems: 1
+
+  arasan,soc-ctl-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to a syscon device (see ../mfd/syscon.txt) used to access
+      core corecfg registers. Offsets of registers in this syscon are
+      determined based on the main compatible string for the device.
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 2
+    description:
+      Name of the card clock which will be exposed by this device.
+
+  '#clock-cells':
+    enum: [0, 1]
+    description:
+      With this property in place we will export one or two clocks
+      representing the Card Clock. These clocks are expected to be
+      consumed by our PHY.
+
+  xlnx,fails-without-test-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, the controller doesn't work when the CD line is not
+      connected properly, and the line is not connected properly.
+      Test mode can be used to force the controller to function.
+
+  xlnx,int-clock-stable-broken:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, the controller always reports that the internal clock
+      is stable even when it is not.
+
+  xlnx,mio-bank:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 0
+    description:
+      The MIO bank number in which the command and data lines are configured.
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+dependencies:
+  '#clock-cells': [ clock-output-names ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@e0100000 {
+          compatible = "arasan,sdhci-8.9a";
+          reg = <0xe0100000 0x1000>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&clkc 21>, <&clkc 32>;
+          interrupt-parent = <&gic>;
+          interrupts = <0 24 4>;
+    };
+
+  - |
+    mmc@e2800000 {
+          compatible = "arasan,sdhci-5.1";
+          reg = <0xe2800000 0x1000>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&cru 8>, <&cru 18>;
+          interrupt-parent = <&gic>;
+          interrupts = <0 24 4>;
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+    };
+
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    mmc@fe330000 {
+          compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+          reg = <0xfe330000 0x10000>;
+          interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+          clock-names = "clk_xin", "clk_ahb";
+          arasan,soc-ctl-syscon = <&grf>;
+          assigned-clocks = <&cru SCLK_EMMC>;
+          assigned-clock-rates = <200000000>;
+          clock-output-names = "emmc_cardclock";
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          #clock-cells = <0>;
+    };
+
+  - |
+    mmc@ff160000 {
+          compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+          interrupt-parent = <&gic>;
+          interrupts = <0 48 4>;
+          reg = <0xff160000 0x1000>;
+          clocks = <&clk200>, <&clk200>;
+          clock-names = "clk_xin", "clk_ahb";
+          clock-output-names = "clk_out_sd0", "clk_in_sd0";
+          #clock-cells = <1>;
+          clk-phase-sd-hs = <63>, <72>;
+    };
+
+  - |
+    mmc@f1040000 {
+          compatible = "xlnx,versal-8.9a", "arasan,sdhci-8.9a";
+          interrupt-parent = <&gic>;
+          interrupts = <0 126 4>;
+          reg = <0xf1040000 0x10000>;
+          clocks = <&clk200>, <&clk200>;
+          clock-names = "clk_xin", "clk_ahb";
+          clock-output-names = "clk_out_sd0", "clk_in_sd0";
+          #clock-cells = <1>;
+          clk-phase-sd-hs = <132>, <60>;
+    };
+
+  - |
+    #define LGM_CLK_EMMC5
+    #define LGM_CLK_NGI
+    #define LGM_GCLK_EMMC
+    mmc@ec700000 {
+          compatible = "intel,lgm-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+          reg = <0xec700000 0x300>;
+          interrupt-parent = <&ioapic1>;
+          interrupts = <44 1>;
+          clocks = <&cgu0 LGM_CLK_EMMC5>, <&cgu0 LGM_CLK_NGI>,
+                   <&cgu0 LGM_GCLK_EMMC>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
+          clock-output-names = "emmc_cardclock";
+          #clock-cells = <0>;
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          arasan,soc-ctl-syscon = <&sysconf>;
+    };
+
+  - |
+    #define LGM_CLK_SDIO
+    #define LGM_GCLK_SDXC
+    mmc@ec600000 {
+          compatible = "intel,lgm-sdhci-5.1-sdxc", "arasan,sdhci-5.1";
+          reg = <0xec600000 0x300>;
+          interrupt-parent = <&ioapic1>;
+          interrupts = <43 1>;
+          clocks = <&cgu0 LGM_CLK_SDIO>, <&cgu0 LGM_CLK_NGI>,
+                   <&cgu0 LGM_GCLK_SDXC>;
+          clock-names = "clk_xin", "clk_ahb", "gate";
+          clock-output-names = "sdxc_cardclock";
+          #clock-cells = <0>;
+          phys = <&sdxc_phy>;
+          phy-names = "phy_arasan";
+          arasan,soc-ctl-syscon = <&sysconf>;
+    };
+
+  - |
+    #define KEEM_BAY_PSS_AUX_EMMC
+    #define KEEM_BAY_PSS_EMMC
+    mmc@33000000 {
+          compatible = "intel,keembay-sdhci-5.1-emmc", "arasan,sdhci-5.1";
+          interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+          reg = <0x33000000 0x300>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>,
+                   <&scmi_clk KEEM_BAY_PSS_EMMC>;
+          phys = <&emmc_phy>;
+          phy-names = "phy_arasan";
+          assigned-clocks = <&scmi_clk KEEM_BAY_PSS_AUX_EMMC>;
+          assigned-clock-rates = <200000000>;
+          clock-output-names = "emmc_cardclock";
+          #clock-cells = <0>;
+          arasan,soc-ctl-syscon = <&mmc_phy_syscon>;
+    };
+
+  - |
+    #define KEEM_BAY_PSS_AUX_SD0
+    #define KEEM_BAY_PSS_SD0
+    mmc@31000000 {
+          compatible = "intel,keembay-sdhci-5.1-sd";
+          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+          reg = <0x31000000 0x300>;
+          clock-names = "clk_xin", "clk_ahb";
+          clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>,
+                   <&scmi_clk KEEM_BAY_PSS_SD0>;
+          arasan,soc-ctl-syscon = <&sd0_phy_syscon>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
new file mode 100644
index 0000000000..2459a55ed5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The ARM PrimeCells MMCI PL180 and PL181 provides an interface for
+  reading and writing to MultiMedia and SD cards alike. Over the years
+  vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO
+  host controllers with very similar characteristics.
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: mmc-controller.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl180
+          - arm,pl181
+          - arm,pl18x
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: The first version of the block, simply called
+          PL180 and found in the ARM Integrator IM/PD1 logic module.
+        items:
+          - const: arm,pl180
+          - const: arm,primecell
+      - description: The improved version of the block, found in the
+          ARM Versatile and later reference designs. Further revisions
+          exist but get detected at runtime by reading some magic numbers
+          in the PrimeCell ID registers.
+        items:
+          - const: arm,pl181
+          - const: arm,primecell
+      - description: Wildcard entry that will let the operating system
+          inspect the PrimeCell ID registers to determine which hardware
+          variant of PL180 or PL181 this is.
+        items:
+          - const: arm,pl18x
+          - const: arm,primecell
+      - description: Entries for STMicroelectronics variant of PL18x.
+        items:
+          - enum:
+              - st,stm32-sdmmc2
+              - st,stm32mp25-sdmmc2
+          - const: arm,pl18x
+          - const: arm,primecell
+
+  clocks:
+    description: One or two clocks, the "apb_pclk" and the "MCLK"
+      which is the core block clock. The names are not compulsory.
+    minItems: 1
+    maxItems: 2
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rx
+          - const: tx
+
+  power-domains: true
+
+  resets:
+    maxItems: 1
+
+  reg:
+    description: the MMIO memory window must be exactly 4KB (0x1000) and the
+      layout should provide the PrimeCell ID registers so that the device can
+      be discovered. On ST Micro variants, a second register window may be
+      defined if a delay block is present and used for tuning.
+
+  interrupts:
+    description: The first interrupt is the command interrupt and corresponds
+      to the event at the end of a command. The second interrupt is the
+      PIO (polled I/O) interrupt and occurs when the FIFO needs to be
+      emptied as part of a bulk read from the card. Some variants have these
+      two interrupts wired into the same line (logic OR) and in that case
+      only one interrupt may be provided. The interrupt-names property is
+      not used due to inconsistency of existing DTs regarding its content.
+    deprecated: false
+    minItems: 1
+    maxItems: 2
+
+  st,sig-dir-dat0:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[0].
+
+  st,sig-dir-dat2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[2].
+
+  st,sig-dir-dat31:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[3] and DAT[1].
+
+  st,sig-dir-dat74:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, bus signal direction pins used for
+      DAT[7] and DAT[4].
+
+  st,sig-dir-cmd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, CMD signal direction used for
+      pin CMD.
+
+  st,sig-pin-fbclk:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, feedback clock FBCLK signal pin
+      in use.
+
+  st,sig-dir:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, signal direction polarity used for
+      pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3].
+
+  st,neg-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, data and command phase relation,
+      generated on the sd clock falling edge.
+
+  st,use-ckin:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: ST Micro-specific property, use CKIN pin from an external
+      driver to sample the receive data (for example with a voltage switch
+      transceiver).
+
+  st,cmd-gpios:
+    maxItems: 1
+    description:
+      The GPIO matching the CMD pin.
+
+  st,ck-gpios:
+    maxItems: 1
+    description:
+      The GPIO matching the CK pin.
+
+  st,ckin-gpios:
+    maxItems: 1
+    description:
+      The GPIO matching the CKIN pin.
+
+dependencies:
+  st,cmd-gpios: [ "st,use-ckin" ]
+  st,ck-gpios: [ "st,use-ckin" ]
+  st,ckin-gpios: [ "st,use-ckin" ]
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    mmc@5000 {
+      compatible = "arm,pl180", "arm,primecell";
+      reg = <0x5000 0x1000>;
+      interrupts-extended = <&vic 22 &sic 1>;
+      clocks = <&xtal24mhz>, <&pclk>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@80126000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80126000 0x1000>;
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>;
+      dma-names = "rx", "tx";
+      clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+      clock-names = "sdi", "apb_pclk";
+      max-frequency = <100000000>;
+      bus-width = <4>;
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cd-gpios  = <&gpio2 31 0x4>;
+      st,sig-dir-dat0;
+      st,sig-dir-dat2;
+      st,sig-dir-cmd;
+      st,sig-pin-fbclk;
+      vmmc-supply = <&ab8500_ldo_aux3_reg>;
+      vqmmc-supply = <&vmmci>;
+    };
+
+  - |
+    mmc@101f6000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x101f6000 0x1000>;
+      clocks = <&sdiclk>, <&pclksdi>;
+      clock-names = "mclk", "apb_pclk";
+      interrupts = <22>;
+      max-frequency = <400000>;
+      bus-width = <4>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+      full-pwr-cycle;
+      st,sig-dir-dat0;
+      st,sig-dir-dat2;
+      st,sig-dir-dat31;
+      st,sig-dir-cmd;
+      st,sig-pin-fbclk;
+      vmmc-supply = <&vmmc_regulator>;
+    };
+
+  - |
+    mmc@52007000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      arm,primecell-periphid = <0x10153180>;
+      reg = <0x52007000 0x1000>;
+      interrupts = <49>;
+      clocks = <&rcc 0>;
+      clock-names = "apb_pclk";
+      resets = <&rcc 1>;
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      max-frequency = <120000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
new file mode 100644
index 0000000000..9fce8cd7b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 IBM Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/MMC Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+  only a single slot is enabled.
+
+  The two slots are supported by a common configuration area. As the SDHCIs for
+  the slots are dependent on the common configuration area, they are described
+  as child nodes.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sd-controller
+      - aspeed,ast2500-sd-controller
+      - aspeed,ast2600-sd-controller
+  reg:
+    maxItems: 1
+    description: Common configuration registers
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 1
+  ranges: true
+  clocks:
+    maxItems: 1
+    description: The SD/SDIO controller clock gate
+
+patternProperties:
+  "^sdhci@[0-9a-f]+$":
+    type: object
+    $ref: mmc-controller.yaml
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - aspeed,ast2400-sdhci
+          - aspeed,ast2500-sdhci
+          - aspeed,ast2600-sdhci
+      reg:
+        maxItems: 1
+        description: The SDHCI registers
+      clocks:
+        maxItems: 1
+        description: The SD bus clock
+      interrupts:
+        maxItems: 1
+        description: The SD interrupt shared between both slots
+      sdhci,auto-cmd12:
+        type: boolean
+        description: Specifies that controller should use auto CMD12
+    required:
+      - compatible
+      - reg
+      - clocks
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sdc@1e740000 {
+            compatible = "aspeed,ast2500-sd-controller";
+            reg = <0x1e740000 0x100>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x1e740000 0x20000>;
+            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+            sdhci0: sdhci@100 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x100 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+
+            sdhci1: sdhci@200 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x200 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
new file mode 100644
index 0000000000..07ad02075a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -0,0 +1,73 @@
+* Atmel High Speed MultiMedia Card Interface
+
+This controller on atmel products provides an interface for MMC, SD and SDIO
+types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the atmel-mci driver.
+
+1) MCI node
+
+Required properties:
+- compatible: should be "atmel,hsmci"
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+- at least one slot node
+- clock-names: tuple listing input clock names.
+	Required elements: "mci_clk"
+- clocks: phandles to input clocks.
+
+The node contains child nodes for each slot that the platform uses
+
+Example MCI node:
+
+mmc0: mmc@f0008000 {
+	compatible = "atmel,hsmci";
+	reg = <0xf0008000 0x600>;
+	interrupts = <12 4>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-names = "mci_clk";
+	clocks = <&mci0_clk>;
+
+	[ child node definitions...]
+};
+
+2) slot nodes
+
+Required properties:
+- reg: should contain the slot id.
+- bus-width: number of data lines connected to the controller
+
+Optional properties:
+- cd-gpios: specify GPIOs for card detection
+- cd-inverted: invert the value of external card detect gpio line
+- wp-gpios: specify GPIOs for write protection
+
+Example slot node:
+
+slot@0 {
+	reg = <0>;
+	bus-width = <4>;
+	cd-gpios = <&pioD 15 0>
+	cd-inverted;
+};
+
+Example full MCI node:
+mmc0: mmc@f0008000 {
+	compatible = "atmel,hsmci";
+	reg = <0xf0008000 0x600>;
+	interrupts = <12 4>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 0>
+		cd-inverted;
+	};
+	slot@1 {
+		reg = <1>;
+		bus-width = <4>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt
new file mode 100644
index 0000000000..b0f0999ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt
@@ -0,0 +1,29 @@
+* Mellanox Bluefield SoC specific extensions to the Synopsys Designware
+  Mobile Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Mellanox Bluefield SoC
+specific extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be one of the following.
+  - "mellanox,bluefield-dw-mshc": for controllers with Mellanox Bluefield SoC
+    specific extensions.
+
+Example:
+
+	/* Mellanox Bluefield SoC MMC */
+	mmc@6008000 {
+		compatible = "mellanox,bluefield-dw-mshc";
+		reg = <0x6008000 0x400>;
+		interrupts = <32>;
+		fifo-depth = <0x100>;
+		clock-frequency = <24000000>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
new file mode 100644
index 0000000000..3a5a448006
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,bcm2835-sdhost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 SDHOST controller
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm2835-sdhost
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    sdhost: mmc@7e202000 {
+      compatible = "brcm,bcm2835-sdhost";
+      reg = <0x7e202000 0x100>;
+      interrupts = <2 24>;
+      clocks = <&clocks BCM2835_CLOCK_VPU>;
+      dmas = <&dma 13>;
+      dma-names = "rx-tx";
+      bus-width = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
new file mode 100644
index 0000000000..2f63f2cdeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom IPROC SDHCI controller
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-sdhci
+      - brcm,bcm2711-emmc2
+      - brcm,sdhci-iproc-cygnus
+      - brcm,sdhci-iproc
+      - brcm,bcm7211a0-sdhci
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to core clock for the sdhci controller.
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/bcm-cygnus.h>
+
+    mmc@18041000 {
+      compatible = "brcm,sdhci-iproc-cygnus";
+      reg = <0x18041000 0x100>;
+      interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+      bus-width = <4>;
+      sdhci,auto-cmd12;
+      no-1-8-v;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
new file mode 100644
index 0000000000..12eb3988f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,kona-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family SDHCI controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+properties:
+  compatible:
+    const: brcm,kona-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/bcm281xx.h>
+
+    mmc@3f1a0000 {
+        compatible = "brcm,kona-sdhci";
+        reg = <0x3f1a0000 0x10000>;
+        clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+        interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
new file mode 100644
index 0000000000..c028039bc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BRCMSTB/BMIPS SDHCI Controller
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sdhci
+          - const: brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7425-sdhci
+          - const: brcm,sdhci-brcmstb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: host
+      - const: cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: handle to core clock for the sdhci controller
+      - description: handle to improved 150Mhz clock for sdhci controller (Optional clock)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_sdio
+      - const: sdio_freq # Optional clock
+
+  clock-frequency:
+    description:
+      Maximum operating frequency of sdio_freq sdhci controller clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000000
+    maximum: 150000000
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        clock-names:
+          contains:
+            const: sdio_freq
+
+    then:
+      required:
+        - clock-frequency
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@84b0000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
+      reg-names = "host", "cfg";
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
+      interrupts = <0x0 0x26 0x4>;
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
+
+    mmc@84b1000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
+      mmc-ddr-1_8v;
+      mmc-hs200-1_8v;
+      mmc-hs400-1_8v;
+      mmc-hs400-enhanced-strobe;
+      supports-cqe;
+      non-removable;
+      bus-width = <0x8>;
+      interrupts = <0x0 0x27 0x4>;
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
new file mode 100644
index 0000000000..1433e6201d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
@@ -0,0 +1,57 @@
+* Cavium Octeon & ThunderX MMC controller
+
+The highspeed MMC host controller on Caviums SoCs provides an interface
+for MMC and SD types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 4.0. Only 3.3 Volt is supported.
+
+Required properties:
+ - compatible : should be one of:
+   cavium,octeon-6130-mmc
+   cavium,octeon-7890-mmc
+   cavium,thunder-8190-mmc
+   cavium,thunder-8390-mmc
+   mmc-slot
+ - reg : mmc controller base registers
+ - clocks : phandle
+
+Optional properties:
+ - for cd, bus-width and additional generic mmc parameters
+   please refer to mmc.txt within this directory
+ - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command
+ - cavium,dat-clk-skew : number of coprocessor clocks before sampling data
+
+Deprecated properties:
+- spi-max-frequency : use max-frequency instead
+- cavium,bus-max-width : use bus-width instead
+- power-gpios : use vmmc-supply instead
+- cavium,octeon-6130-mmc-slot : use mmc-slot instead
+
+Examples:
+	mmc_1_4: mmc@1,4 {
+		compatible = "cavium,thunder-8390-mmc";
+		reg = <0x0c00 0 0 0 0>;	/* DEVFN = 0x0c (1:4) */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&sclk>;
+
+		mmc-slot@0 {
+			compatible = "mmc-slot";
+			reg = <0>;
+			vmmc-supply = <&mmc_supply_3v3>;
+			max-frequency = <42000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+		};
+
+		mmc-slot@1 {
+			compatible = "mmc-slot";
+			reg = <1>;
+			vmmc-supply = <&mmc_supply_3v3>;
+			max-frequency = <42000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			non-removable;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
new file mode 100644
index 0000000000..6c40611405
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amd,pensando-elba-sd4hc
+          - microchip,mpfs-sd4hc
+          - socionext,uniphier-sd4hc
+      - const: cdns,sd4hc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  # PHY DLL input delays:
+  # They are used to delay the data valid window, and align the window to
+  # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+  # and it is increased by 2.5ns in each step.
+
+  cdns,phy-input-delay-sd-highspeed:
+    description: Value of the delay in the input path for SD high-speed timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-legacy:
+    description: Value of the delay in the input path for legacy timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr12:
+    description: Value of the delay in the input path for SD UHS SDR12 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr25:
+    description: Value of the delay in the input path for SD UHS SDR25 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-sdr50:
+    description: Value of the delay in the input path for SD UHS SDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-sd-uhs-ddr50:
+    description: Value of the delay in the input path for SD UHS DDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-mmc-highspeed:
+    description: Value of the delay in the input path for MMC high-speed timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-input-delay-mmc-ddr:
+    description: Value of the delay in the input path for eMMC high-speed DDR timing
+
+  # PHY DLL clock delays:
+  # Each delay property represents the fraction of the clock period.
+  # The approximate delay value will be
+  # (<delay property value>/128)*sdmclk_clock_period.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  cdns,phy-dll-delay-sdclk:
+    description: |
+      Value of the delay introduced on the sdclk output for all modes except
+      HS200, HS400 and HS400_ES.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7f
+
+  cdns,phy-dll-delay-sdclk-hsmmc:
+    description: |
+      Value of the delay introduced on the sdclk output for HS200, HS400 and
+      HS400_ES speed modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7f
+
+  cdns,phy-dll-delay-strobe:
+    description: |
+      Value of the delay introduced on the dat_strobe input used in
+      HS400 / HS400_ES speed modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7f
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: mmc-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amd,pensando-elba-sd4hc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Host controller registers
+            - description: Elba byte-lane enable register for writes
+      required:
+        - resets
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    emmc: mmc@5a000000 {
+        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+        reg = <0x5a000000 0x400>;
+        interrupts = <0 78 4>;
+        clocks = <&clk 4>;
+        bus-width = <8>;
+        mmc-ddr-1_8v;
+        mmc-hs200-1_8v;
+        mmc-hs400-1_8v;
+        cdns,phy-dll-delay-sdclk = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
new file mode 100644
index 0000000000..516fb0143d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
@@ -0,0 +1,32 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+	as described in the generic DMA client binding. A tx and rx
+	specifier is required.
+- dma-names: RX and TX  DMA request names. These strings correspond
+	1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+	compatible = "ti,da830-mmc",
+	reg = <0x40000 0x1000>;
+	interrupts = <16>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
new file mode 100644
index 0000000000..edb8cadb95
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -0,0 +1,52 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdhci-esdhc driver.
+
+Required properties:
+  - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
+    Possible compatibles for PowerPC:
+	"fsl,mpc8536-esdhc"
+	"fsl,mpc8378-esdhc"
+	"fsl,p2020-esdhc"
+	"fsl,p4080-esdhc"
+	"fsl,t1040-esdhc"
+	"fsl,t4240-esdhc"
+    Possible compatibles for ARM:
+	"fsl,ls1012a-esdhc"
+	"fsl,ls1028a-esdhc"
+	"fsl,ls1088a-esdhc"
+	"fsl,ls1043a-esdhc"
+	"fsl,ls1046a-esdhc"
+	"fsl,ls2080a-esdhc"
+  - clock-frequency : specifies eSDHC base clock frequency.
+
+Optional properties:
+  - sdhci,wp-inverted : specifies that eSDHC controller reports
+    inverted write-protect state; New devices should use the generic
+    "wp-inverted" property.
+  - sdhci,1-bit-only : specifies that a controller can only handle
+    1-bit data transfers. New devices should use the generic
+    "bus-width = <1>" property.
+  - sdhci,auto-cmd12: specifies that a controller can only handle auto
+    CMD12.
+  - voltage-ranges : two cells are required, first cell specifies minimum
+    slot voltage (mV), second cell specifies maximum slot voltage (mV).
+    Several ranges could be specified.
+  - little-endian : If the host controller is little-endian mode, specify
+    this property. The default endian mode is big-endian.
+
+Example:
+
+sdhci@2e000 {
+	compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <42 0x8>;
+	interrupt-parent = <&ipic>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+	voltage-ranges = <3300 3300>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
new file mode 100644
index 0000000000..82eb7a24c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+description: |
+  The Enhanced Secure Digital Host Controller on Freescale i.MX family
+  provides an interface for MMC, SD, and SDIO types of memory cards.
+
+  This file documents differences between the core properties described
+  by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx25-esdhc
+          - fsl,imx35-esdhc
+          - fsl,imx51-esdhc
+          - fsl,imx53-esdhc
+          - fsl,imx6q-usdhc
+          - fsl,imx6sl-usdhc
+          - fsl,imx6sx-usdhc
+          - fsl,imx7d-usdhc
+          - fsl,imx7ulp-usdhc
+          - fsl,imx8mm-usdhc
+          - fsl,imxrt1050-usdhc
+          - nxp,s32g2-usdhc
+      - items:
+          - const: fsl,imx50-esdhc
+          - const: fsl,imx53-esdhc
+      - items:
+          - enum:
+              - fsl,imx6sll-usdhc
+              - fsl,imx6ull-usdhc
+              - fsl,imx6ul-usdhc
+          - const: fsl,imx6sx-usdhc
+      - items:
+          - const: fsl,imx7d-usdhc
+          - const: fsl,imx6sl-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mq-usdhc
+          - const: fsl,imx7d-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx8ulp-usdhc
+          - const: fsl,imx8mm-usdhc
+      - items:
+          - enum:
+              - fsl,imx8dxl-usdhc
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mm-usdhc
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx8qm-usdhc
+              - fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+          - const: fsl,imx8mm-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8dxl-usdhc
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imxrt1170-usdhc
+          - const: fsl,imxrt1050-usdhc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,wp-controller:
+    description: |
+      boolean, if present, indicate to use controller internal write protection.
+    type: boolean
+
+  fsl,delay-line:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the number of delay cells for override mode.
+      This is used to set the clock delay for DLL(Delay Line) on override mode
+      to select a proper data sampling window in case the clock quality is not good
+      because the signal path is too long on the board. Please refer to eSDHC/uSDHC
+      chapter, DLL (Delay Line) section in RM for details.
+    default: 0
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Specify the voltage range in case there are software transparent level
+      shifters on the outputs of the controller. Two cells are required, first
+      cell specifies minimum slot voltage (mV), second cell specifies maximum
+      slot voltage (mV).
+    items:
+      items:
+        - description: value for minimum slot voltage
+        - description: value for maximum slot voltage
+    maxItems: 1
+
+  fsl,tuning-start-tap:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the start delay cell point when send first CMD19 in tuning procedure.
+    default: 0
+
+  fsl,tuning-step:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the increasing delay cell steps in tuning procedure.
+      The uSDHC use one delay cell as default increasing step to do tuning process.
+      This property allows user to change the tuning step to more than one delay
+      cell which is useful for some special boards or cards when the default
+      tuning step can't find the proper delay window within limited tuning retries.
+    default: 0
+
+  fsl,strobe-dll-delay-target:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify the strobe dll control slave delay target.
+      This delay target programming host controller loopback read clock, and this
+      property allows user to change the delay target for the strobe input read clock.
+      If not use this property, driver default set the delay target to value 7.
+      Only eMMC HS400 mode need to take care of this property.
+    default: 0
+
+  clocks:
+    maxItems: 3
+    description:
+      Handle clocks for the sdhc controller.
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: per
+
+  power-domains:
+    maxItems: 1
+
+  pinctrl-names:
+    oneOf:
+      - minItems: 3
+        items:
+          - const: default
+          - const: state_100mhz
+          - const: state_200mhz
+          - const: sleep
+      - minItems: 1
+        items:
+          - const: default
+          - const: sleep
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@70004000 {
+        compatible = "fsl,imx51-esdhc";
+        reg = <0x70004000 0x4000>;
+        interrupts = <1>;
+        fsl,wp-controller;
+    };
+
+    mmc@70008000 {
+        compatible = "fsl,imx51-esdhc";
+        reg = <0x70008000 0x4000>;
+        interrupts = <2>;
+        cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+        wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
+    };
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
new file mode 100644
index 0000000000..221f5bc047
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Secure Digital Host Controller for i.MX2/3 series
+
+maintainers:
+  - Markus Pargmann <mpa@pengutronix.de>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-mmc
+      - const: fsl,imx31-mmc
+      - items:
+          - const: fsl,imx27-mmc
+          - const: fsl,imx21-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@10014000 {
+        compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+        reg = <0x10014000 0x1000>;
+        interrupts = <11>;
+        dmas = <&dma 7>;
+        dma-names = "rx-tx";
+        bus-width = <4>;
+        cd-gpios = <&gpio3 29>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml b/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml
new file mode 100644
index 0000000000..430b628993
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fujitsu,sdhci-fujitsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu/Socionext SDHCI controller (F_SDH30)
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: socionext,synquacer-sdhci
+          - const: fujitsu,mb86s70-sdhci-3.0
+      - enum:
+          - fujitsu,mb86s70-sdhci-3.0
+          - socionext,f-sdh30-e51-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  fujitsu,cmd-dat-delay-select:
+    type: boolean
+    description: |
+      Indicating that this host requires the CMD_DAT_DELAY control to be enabled
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    sdhci1: mmc@36600000 {
+        compatible = "fujitsu,mb86s70-sdhci-3.0";
+        reg = <0x36600000 0x1000>;
+        bus-width = <4>;
+        vqmmc-supply = <&vccq_sdhci1>;
+        clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+        clock-names = "iface", "core";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
new file mode 100644
index 0000000000..a0693b7145
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt
@@ -0,0 +1,40 @@
+* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200
+specific extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc".
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed
+  in clock-names.
+- clock-names: Should contain the following:
+	"ciu" - The ciu clock described in synopsys-dw-mshc.txt.
+	"biu" - The biu clock described in synopsys-dw-mshc.txt.
+	"ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling.
+	"ciu-drive"  - Hi3798CV200 extended phase clock for ciu driving.
+
+Example:
+
+	emmc: mmc@9830000 {
+		compatible = "hisilicon,hi3798cv200-dw-mshc";
+		reg = <0x9830000 0x10000>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg HISTB_MMC_CIU_CLK>,
+			 <&crg HISTB_MMC_BIU_CLK>,
+			 <&crg HISTB_MMC_SAMPLE_CLK>,
+			 <&crg HISTB_MMC_DRV_CLK>;
+		clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+		fifo-depth = <256>;
+		clock-frequency = <200000000>;
+		cap-mmc-highspeed;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		non-removable;
+		bus-width = <8>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
new file mode 100644
index 0000000000..bb4e0be0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs MMC Controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-mmc
+          - ingenic,jz4725b-mmc
+          - ingenic,jz4760-mmc
+          - ingenic,jz4775-mmc
+          - ingenic,jz4780-mmc
+          - ingenic,x1000-mmc
+      - items:
+          - const: ingenic,jz4770-mmc
+          - const: ingenic,jz4760-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mmc
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: rx
+          - const: tx
+      - const: tx-rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    mmc0: mmc@13450000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13450000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <37>;
+
+      clocks = <&cgu JZ4780_CLK_MSC0>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+             <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    /*
+     * Alternative version of the example above,
+     * but using one single DMA channel for both
+     * TX and RX.
+     */
+    mmc1: mmc@13460000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13460000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <36>;
+
+      clocks = <&cgu JZ4780_CLK_MSC1>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC1_TX JZ4780_DMA_MSC1_RX 0xffffffff>;
+      dma-names = "tx-rx";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
new file mode 100644
index 0000000000..36c4bea675
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -0,0 +1,73 @@
+* Hisilicon specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be one of the following.
+  - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions.
+  - "hisilicon,hi3670-dw-mshc", "hisilicon,hi3660-dw-mshc": for controllers
+     with hi3670 specific extensions.
+  - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
+  - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
+
+Optional Properties:
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+
+Example:
+
+	/* for Hi3620 */
+
+	/* SoC portion */
+	dwmmc_0: dwmmc0@fcd03000 {
+		compatible = "hisilicon,hi4511-dw-mshc";
+		reg = <0xfcd03000 0x1000>;
+		interrupts = <0 16 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
+		clock-names = "ciu", "biu";
+	};
+
+	/* Board portion */
+	dwmmc0@fcd03000 {
+		vmmc-supply = <&ldo12>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
+		bus-width = <4>;
+		disable-wp;
+		cd-gpios = <&gpio10 3 0>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+	};
+
+	/* for Hi6220 */
+
+	dwmmc_1: dwmmc1@f723e000 {
+		compatible = "hisilicon,hi6220-dw-mshc";
+		bus-width = <0x4>;
+		disable-wp;
+		cap-sd-highspeed;
+		sd-uhs-sdr12;
+		sd-uhs-sdr25;
+		card-detect-delay = <200>;
+		hisilicon,peripheral-syscon = <&ao_ctrl>;
+		reg = <0x0 0xf723e000 0x0 0x1000>;
+		interrupts = <0x0 0x49 0x4>;
+		clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>;
+		clock-names = "ciu", "biu";
+		cd-gpios = <&gpio1 0 1>;
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+		pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+		vqmmc-supply = <&ldo7>;
+		vmmc-supply = <&ldo10>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/litex,mmc.yaml b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
new file mode 100644
index 0000000000..ef9e0da44b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/litex,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteSDCard device
+
+maintainers:
+  - Gabriel Somlo <gsomlo@gmail.com>
+
+description: |
+  LiteSDCard is a small footprint, configurable SDCard core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/litesdcard/.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,mmc
+
+  reg:
+    items:
+      - description: PHY registers
+      - description: CORE registers
+      - description: DMA Reader buffer
+      - description: DMA Writer buffer
+      - description: IRQ registers
+    minItems: 4
+
+  reg-names:
+    items:
+      - const: phy
+      - const: core
+      - const: reader
+      - const: writer
+      - const: irq
+    minItems: 4
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to reference clock.
+
+  vmmc-supply:
+    description:
+      Handle to fixed-voltage supply for the card power.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - vmmc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc: mmc@12005000 {
+        compatible = "litex,mmc";
+        reg = <0x12005000 0x100>,
+              <0x12003800 0x100>,
+              <0x12003000 0x100>,
+              <0x12004800 0x100>,
+              <0x12004000 0x100>;
+        reg-names = "phy", "core", "reader", "writer", "irq";
+        clocks = <&reference_clk>;
+        vmmc-supply = <&vreg_mmc>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
new file mode 100644
index 0000000000..7c9c652ad5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,dove-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell sdhci-dove controller
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,dove-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sdio0: mmc@92000 {
+      compatible = "marvell,dove-sdhci";
+      reg = <0x92000 0x100>;
+      interrupts = <35>;
+      clocks = <&gate_clk 9>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
new file mode 100644
index 0000000000..8a97ded15a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,orion-sdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell orion-sdio controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,orion-sdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@d00d4000 {
+      compatible = "marvell,orion-sdio";
+      reg = <0xd00d4000 0x200>;
+      interrupts = <54>;
+      clocks = <&gateclk 17>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
new file mode 100644
index 0000000000..3a8e74894a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Xenon SDHCI Controller
+
+description: |
+  This file documents differences between the core MMC properties described by
+  mmc-controller.yaml and the properties used by the Xenon implementation.
+
+  Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+  Each SDHC is independent and owns independent resources, such as register
+  sets, clock and PHY.
+
+  Each SDHC should have an independent device tree node.
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-cp110-sdhci
+          - marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-ap807-sdhci
+          - const: marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-3700-sdhci
+          - const: marvell,sdhci-xenon
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      For "marvell,armada-3700-sdhci", two register areas.  The first one
+      for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD
+      Voltage Control register.  Please follow the examples with compatible
+      "marvell,armada-3700-sdhci" in below.
+      Please also check property marvell,pad-type in below.
+
+      For other compatible strings, one register area for Xenon IP.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: axi
+
+  interrupts:
+    maxItems: 1
+
+  marvell,xenon-sdhc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: |
+      Indicate the corresponding bit index of current SDHC in SDHC System
+      Operation Control Register Bit[7:0].  Set/clear the corresponding bit to
+      enable/disable current SDHC.
+
+  marvell,xenon-phy-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - emmc 5.1 phy
+      - emmc 5.0 phy
+    description: |
+      Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default
+      choice if this property is not provided.  To select eMMC 5.0 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.0 phy"
+
+      All those types of PHYs can support eMMC, SD and SDIO. Please note that
+      this property only presents the type of PHY.  It doesn't stand for the
+      entire SDHC type or property.  For example, "emmc 5.1 phy" doesn't mean
+      that this Xenon SDHC only supports eMMC 5.1.
+
+  marvell,xenon-phy-znr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZNR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-zpr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZPR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-nr-success-tun:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    default: 0x4
+    description: |
+      Set the number of required consecutive successful sampling points
+      used to identify a valid sampling window, in tuning process.
+
+  marvell,xenon-phy-tun-step-divider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+    description: |
+      Set the divider for calculating TUN_STEP.
+
+  marvell,xenon-phy-slow-mode:
+    type: boolean
+    description: |
+      If this property is selected, transfers will bypass PHY.
+      Only available when bus frequency lower than 55MHz in SDR mode.
+      Disabled by default. Please only try this property if timing issues
+      always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
+      SD Default Speed and HS mode and eMMC legacy speed mode.
+
+  marvell,xenon-tun-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x9
+    description: |
+      Xenon SDHC SoC usually doesn't provide re-tuning counter in
+      Capabilities Register 3 Bit[11:8].
+      This property provides the re-tuning counter.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-3700-sdhci
+
+    then:
+      properties:
+        reg:
+          items:
+            - description: Xenon IP registers
+            - description: Armada 3700 SoC PHY PAD Voltage Control register
+
+        marvell,pad-type:
+          $ref: /schemas/types.yaml#/definitions/string
+          enum:
+            - sd
+            - fixed-1-8v
+          description: |
+            Type of Armada 3700 SoC PHY PAD Voltage Controller register.
+            If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning
+            and is switched to 1.8V when later in higher speed mode.
+            If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for
+            eMMC.
+            Please follow the examples with compatible
+            "marvell,armada-3700-sdhci" in below.
+
+      required:
+        - marvell,pad-type
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-cp110-sdhci
+              - marvell,armada-ap807-sdhci
+              - marvell,armada-ap806-sdhci
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: core
+            - const: axi
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // For eMMC
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci";
+      reg = <0xaa0000 0x1000>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmc_clk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-phy-slow-mode;
+      marvell,xenon-tun-count = <11>;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+    };
+
+  - |
+    // For SD/SDIO
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-cp110-sdhci";
+      reg = <0xab0000 0x1000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_vqmmc_regulator>;
+      vmmc-supply = <&sd_vmmc_regulator>;
+      clocks = <&sdclk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-tun-count = <9>;
+    };
+
+  - |
+    // For eMMC with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xaa0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmcclk 0>;
+      clock-names = "core";
+      bus-width = <8>;
+      mmc-ddr-1_8v;
+      mmc-hs400-1_8v;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+
+      marvell,pad-type = "fixed-1-8v";
+    };
+
+  - |
+    // For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xab0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_regulator>;
+      /* Vmmc is fixed */
+      clocks = <&sdclk 0>;
+      clock-names = "core";
+      bus-width = <4>;
+
+      marvell,pad-type = "sd";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
new file mode 100644
index 0000000000..1f63faf177
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Mobile Storage Host Controller
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: microchip,dw-sparx5-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to "core" clock for the sdhci controller.
+
+  clock-names:
+    items:
+      - const: core
+
+  microchip,clock-delay:
+    description: Delay clock to card to meet setup time requirements.
+      Each step increase by 1.25ns.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/microchip,sparx5.h>
+    sdhci0: mmc@600800000 {
+        compatible = "microchip,dw-sparx5-sdhci";
+        reg = <0x00800000 0x1000>;
+        pinctrl-0 = <&emmc_pins>;
+        pinctrl-names = "default";
+        clocks = <&clks CLK_ID_AUX1>;
+        clock-names = "core";
+        assigned-clocks = <&clks CLK_ID_AUX1>;
+        assigned-clock-rates = <800000000>;
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        bus-width = <8>;
+        microchip,clock-delay = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
new file mode 100644
index 0000000000..f064528eff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -0,0 +1,29 @@
+* Microchip PIC32 SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-pic32 driver.
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-sdhci"
+- interrupts: Should contain interrupt
+- clock-names: Should be "base_clk", "sys_clk".
+               See: Documentation/devicetree/bindings/resource-names.txt
+- clocks: Phandle to the clock.
+          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+
+	sdhci@1f8ec000 {
+		compatible = "microchip,pic32mzda-sdhci";
+		reg = <0x1f8ec000 0x100>;
+		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
+		clock-names = "base_clk", "sys_clk";
+		bus-width = <4>;
+		cap-sd-highspeed;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sdhc1>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
new file mode 100644
index 0000000000..fd34712644
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Card / eMMC Generic
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |
+  This documents describes the devicetree bindings for a mmc-host controller
+  child node describing a mmc-card / an eMMC.
+
+properties:
+  compatible:
+    const: mmc-card
+
+  reg:
+    const: 0
+
+  broken-hpi:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Use this to indicate that the mmc-card has a broken hpi
+      implementation, and that hpi should not be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        card@0 {
+            compatible = "mmc-card";
+            reg = <0>;
+            broken-hpi;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
new file mode 100644
index 0000000000..58ae298cd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -0,0 +1,387 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Controller Common Properties
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |
+  These properties are common to multiple MMC host controllers. Any host
+  that requires the respective functionality should implement them using
+  these definitions.
+
+  It is possible to assign a fixed index mmcN to an MMC host controller
+  (and the corresponding mmcblkN devices) by defining an alias in the
+  /aliases device tree node.
+
+properties:
+  $nodename:
+    pattern: "^mmc(@.*)?$"
+
+  "#address-cells":
+    const: 1
+    description: |
+      The cell is the slot ID if a function subnode is used.
+
+  "#size-cells":
+    const: 0
+
+  # Card Detection.
+  # If none of these properties are supplied, the host native card
+  # detect will be used. Only one of them should be provided.
+
+  broken-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      There is no card detection available; polling must be used.
+
+  cd-gpios:
+    maxItems: 1
+    description:
+      The card detection will be done using the GPIO provided.
+
+  non-removable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Non-removable slot (like eMMC); assume always present.
+
+  # *NOTE* on CD and WP polarity. To use common for all SD/MMC host
+  # controllers line polarity properties, we have to fix the meaning
+  # of the "normal" and "inverted" line levels. We choose to follow
+  # the SDHCI standard, which specifies both those lines as "active
+  # low." Therefore, using the "cd-inverted" property means, that the
+  # CD line is active high, i.e. it is high, when a card is
+  # inserted. Similar logic applies to the "wp-inverted" property.
+  #
+  # CD and WP lines can be implemented on the hardware in one of two
+  # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or
+  # as dedicated pins. Polarity of dedicated pins can be specified,
+  # using *-inverted properties. GPIO polarity can also be specified
+  # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the
+  # latter case. We choose to use the XOR logic for GPIO CD and WP
+  # lines.  This means, the two properties are "superimposed," for
+  # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the
+  # respective *-inverted property property results in a
+  # double-inversion and actually means the "normal" line polarity is
+  # in effect.
+  wp-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The Write Protect line polarity is inverted.
+
+  cd-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The CD line polarity is inverted.
+
+  # Other properties
+
+  bus-width:
+    description:
+      Number of data lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4, 8]
+    default: 1
+
+  max-frequency:
+    description: |
+      Maximum operating frequency of the bus:
+        - for eMMC, the maximum supported frequency is 200MHz,
+        - for SD/SDIO cards the SDR104 mode has a max supported
+          frequency of 208MHz,
+        - some mmc host controllers do support a max frequency upto
+          384MHz.
+      So, lets keep the maximum supported value here.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 400000
+    maximum: 384000000
+
+  disable-wp:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, no physical write-protect line is present. This
+      property should only be specified when the controller has a
+      dedicated write-protect detection logic. If a GPIO is always used
+      for the write-protect detection logic, it is sufficient to not
+      specify the wp-gpios property in the absence of a write-protect
+      line. Not used in combination with eMMC or SDIO.
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO to use for the write-protect detection.
+
+  cd-debounce-delay-ms:
+    description:
+      Set delay time before detecting card after card insert
+      interrupt.
+
+  no-1-8-v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When specified, denotes that 1.8V card voltage is not supported
+      on this system, even if the controller claims it.
+
+  cap-sd-highspeed:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SD high-speed timing is supported.
+
+  cap-mmc-highspeed:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      MMC high-speed timing is supported.
+
+  sd-uhs-sdr12:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SD UHS SDR12 speed is supported.
+
+  sd-uhs-sdr25:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SD UHS SDR25 speed is supported.
+
+  sd-uhs-sdr50:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SD UHS SDR50 speed is supported.
+
+  sd-uhs-sdr104:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SD UHS SDR104 speed is supported.
+
+  sd-uhs-ddr50:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SD UHS DDR50 speed is supported.
+
+  cap-power-off-card:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Powering off the card is safe.
+
+  cap-mmc-hw-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC hardware reset is supported
+
+  cap-sdio-irq:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      enable SDIO IRQ signalling on this interface
+
+  full-pwr-cycle:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Full power cycle of the card is supported.
+
+  full-pwr-cycle-in-suspend:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Full power cycle of the card in suspend is supported.
+
+  mmc-ddr-1_2v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC high-speed DDR mode (1.2V I/O) is supported.
+
+  mmc-ddr-1_8v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC high-speed DDR mode (1.8V I/O) is supported.
+
+  mmc-ddr-3_3v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC high-speed DDR mode (3.3V I/O) is supported.
+
+  mmc-hs200-1_2v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC HS200 mode (1.2V I/O) is supported.
+
+  mmc-hs200-1_8v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC HS200 mode (1.8V I/O) is supported.
+
+  mmc-hs400-1_2v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC HS400 mode (1.2V I/O) is supported.
+
+  mmc-hs400-1_8v:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC HS400 mode (1.8V I/O) is supported.
+
+  mmc-hs400-enhanced-strobe:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      eMMC HS400 enhanced strobe mode is supported
+
+  no-mmc-hs400:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      All eMMC HS400 modes are not supported.
+
+  dsr:
+    description:
+      Value the card Driver Stage Register (DSR) should be programmed
+      with.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xffff
+
+  no-sdio:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Controller is limited to send SDIO commands during
+      initialization.
+
+  no-sd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Controller is limited to send SD commands during initialization.
+
+  no-mmc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Controller is limited to send MMC commands during
+      initialization.
+
+  fixed-emmc-driver-type:
+    description:
+      For non-removable eMMC, enforce this driver type. The value is
+      the driver type as specified in the eMMC specification (table
+      206 in spec version 5.1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4
+
+  post-power-on-delay-ms:
+    description:
+      It was invented for MMC pwrseq-simple which could be referred to
+      mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay
+      waiting for I/O signalling and card power supply to be stable,
+      regardless of whether pwrseq-simple is used. Default to 10ms if
+      no available.
+    default: 10
+
+  supports-cqe:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates that the corresponding
+      MMC host controller supports HW command queue feature.
+
+  disable-cqe-dcmd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates that the MMC
+      controller\'s command queue engine (CQE) does not support direct
+      commands (DCMDs).
+
+  keep-power-in-suspend:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SDIO only. Preserves card power during a suspend/resume cycle.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      SDIO only. Enables wake up of host system on SDIO IRQ assertion.
+
+  vmmc-supply:
+    description:
+      Supply for the card power
+
+  vqmmc-supply:
+    description:
+      Supply for the bus IO line power, such as a level shifter.
+      If the level shifter is controlled by a GPIO line, this shall
+      be modeled as a "regulator-fixed" with a GPIO line for
+      switching the level shifter on/off.
+
+  mmc-pwrseq:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      System-on-Chip designs may specify a specific MMC power
+      sequence. To successfully detect an (e)MMC/SD/SDIO card, that
+      power sequence must be maintained while initializing the card.
+
+patternProperties:
+  "^.*@[0-9]+$":
+    type: object
+    description: |
+      On embedded systems the cards connected to a host may need
+      additional properties. These can be specified in subnodes to the
+      host controller node. The subnodes are identified by the
+      standard \'reg\' property. Which information exactly can be
+      specified depends on the bindings for the SDIO function driver
+      for the subnode, as specified by the compatible string.
+
+    properties:
+      compatible:
+        description: |
+          Name of SDIO function following generic names recommended
+          practice
+
+      reg:
+        items:
+          - minimum: 0
+            maximum: 7
+            description:
+              Must contain the SDIO function number of the function this
+              subnode describes. A value of 0 denotes the memory SD
+              function, values from 1 to 7 denote the SDIO functions.
+
+    required:
+      - reg
+
+  "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+    minItems: 2
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 359
+      description:
+        Set the clock (phase) delays which are to be configured in the
+        controller while switching to particular speed mode. These values
+        are in pair of degrees.
+
+dependencies:
+  cd-debounce-delay-ms: [ cd-gpios ]
+  fixed-emmc-driver-type: [ non-removable ]
+
+additionalProperties: true
+
+examples:
+  - |
+    mmc3: mmc@1c12000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x1c12000 0x200>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&mmc3_pins_a>;
+        vmmc-supply = <&reg_vmmc3>;
+        bus-width = <4>;
+        non-removable;
+        mmc-pwrseq = <&sdhci0_pwrseq>;
+
+        brcmf: wifi@1 {
+            reg = <1>;
+            compatible = "brcm,bcm4329-fmac";
+            interrupt-parent = <&pio>;
+            interrupts = <10 8>;
+            interrupt-names = "host-wake";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
new file mode 100644
index 0000000000..588be73168
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple eMMC hardware reset provider
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The purpose of this driver is to perform standard eMMC hw reset
+  procedure, as described by Jedec 4.4 specification. This procedure is
+  performed just after MMC core enabled power to the given mmc host (to
+  fix possible issues if bootloader has left eMMC card in initialized or
+  unknown state), and before performing complete system reboot (also in
+  case of emergency reboot call). The latter is needed on boards, which
+  doesn't have hardware reset logic connected to emmc card and (limited or
+  broken) ROM bootloaders are unable to read second stage from the emmc
+  card if the card is left in unknown or already initialized state.
+
+properties:
+  compatible:
+    const: mmc-pwrseq-emmc
+
+  reset-gpios:
+    minItems: 1
+    description:
+      contains a GPIO specifier. The reset GPIO is asserted
+      and then deasserted to perform eMMC card reset. To perform
+      reset procedure as described in Jedec 4.4 specification, the
+      gpio line should be defined as GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pwrseq {
+      compatible = "mmc-pwrseq-emmc";
+      reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
new file mode 100644
index 0000000000..b35e00e8c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell SD8787 power sequence provider
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - mmc-pwrseq-sd8787
+      - mmc-pwrseq-wilc1000
+
+  powerdown-gpios:
+    minItems: 1
+    description:
+      contains a power down GPIO specifier with the default active state
+
+  reset-gpios:
+    minItems: 1
+    description:
+      contains a reset GPIO specifier with the default active state
+
+required:
+  - compatible
+  - powerdown-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pwrseq {
+      compatible = "mmc-pwrseq-sd8787";
+      powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
+      reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
new file mode 100644
index 0000000000..00feaafc10
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple MMC power sequence provider
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  The purpose of the simple MMC power sequence provider is to supports a set
+  of common properties between various SOC designs. It thus enables us to use
+  the same provider for several SOC designs.
+
+properties:
+  compatible:
+    const: mmc-pwrseq-simple
+
+  reset-gpios:
+    minItems: 1
+    # Put some limit to avoid false warnings
+    maxItems: 32
+    description:
+      contains a list of GPIO specifiers. The reset GPIOs are asserted
+      at initialization and prior we start the power up procedure of the card.
+      They will be de-asserted right after the power has been provided to the
+      card.
+
+  clocks:
+    minItems: 1
+    description: Handle for the entry in clock-names.
+
+  clock-names:
+    items:
+      - const: ext_clock
+    description: External clock provided to the card.
+
+  post-power-on-delay-ms:
+    description:
+      Delay in ms after powering the card and de-asserting the
+      reset-gpios (if any).
+
+  power-off-delay-us:
+    description:
+      Delay in us after asserting the reset-gpios (if any)
+      during power off of the card.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pwrseq {
+      compatible = "mmc-pwrseq-simple";
+      reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+      clocks = <&clk_32768_ck>;
+      clock-names = "ext_clock";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
new file mode 100644
index 0000000000..36acc40c7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC/SD/SDIO slot directly connected to a SPI bus
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+description: |
+  The extra properties used by an mmc connected via SPI.
+
+properties:
+  compatible:
+    const: mmc-spi-slot
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Two cells are required, first cell specifies minimum slot voltage (mV),
+      second cell specifies maximum slot voltage (mV).
+    items:
+      - description: |
+          value for minimum slot voltage in mV
+        default: 3200
+      - description: |
+          value for maximum slot voltage in mV
+        default: 3400
+
+  gpios:
+    description: |
+      For historical reasons, this does not follow the generic mmc-controller
+      binding.
+    minItems: 1
+    items:
+      - description: Card-Detect GPIO
+      - description: Write-Protect GPIO
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mmc@0 {
+        compatible = "mmc-spi-slot";
+        reg = <0>;
+        gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>;
+        voltage-ranges = <3300 3300>;
+        spi-max-frequency = <50000000>;
+        interrupts = <42>;
+        interrupt-parent = <&PIC>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
new file mode 100644
index 0000000000..bf9d7d3feb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -0,0 +1 @@
+This file has moved to mmc-controller.yaml.
diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
new file mode 100644
index 0000000000..b63819149f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt
@@ -0,0 +1,30 @@
+MOXA ART MMC Host Controller Interface
+
+  Inherits from mmc binding[1].
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain the interrupt number
+- clocks :	Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas :	Should contain two DMA channels, line request number must be 5 for
+		both channels
+- dma-names :	Must be "tx", "rx"
+
+Example:
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
new file mode 100644
index 0000000000..3fffa467e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -0,0 +1,360 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTK MSDC Storage Host Controller
+
+maintainers:
+  - Chaotian Jing <chaotian.jing@mediatek.com>
+  - Wenbin Mei <wenbin.mei@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-mmc
+          - mediatek,mt2712-mmc
+          - mediatek,mt6779-mmc
+          - mediatek,mt6795-mmc
+          - mediatek,mt7620-mmc
+          - mediatek,mt7622-mmc
+          - mediatek,mt7986-mmc
+          - mediatek,mt8135-mmc
+          - mediatek,mt8173-mmc
+          - mediatek,mt8183-mmc
+          - mediatek,mt8516-mmc
+      - items:
+          - const: mediatek,mt7623-mmc
+          - const: mediatek,mt2701-mmc
+      - items:
+          - enum:
+              - mediatek,mt8186-mmc
+              - mediatek,mt8188-mmc
+              - mediatek,mt8192-mmc
+              - mediatek,mt8195-mmc
+              - mediatek,mt8365-mmc
+          - const: mediatek,mt8183-mmc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register (required).
+      - description: top base register (required for MT8183).
+
+  clocks:
+    description:
+      Should contain phandle for the clock feeding the MMC controller.
+    minItems: 2
+    maxItems: 7
+
+  clock-names:
+    minItems: 2
+    maxItems: 7
+
+  interrupts:
+    description:
+      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+      interrupt is required and be configured as wakeup source irq.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: msdc
+      - const: sdio_wakeup
+
+  pinctrl-names:
+    description:
+      Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+      will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+      scenario.
+    minItems: 2
+    items:
+      - const: default
+      - const: state_uhs
+      - const: state_eint
+
+  pinctrl-0:
+    description:
+      should contain default/high speed pin ctrl.
+    maxItems: 1
+
+  pinctrl-1:
+    description:
+      should contain uhs mode pin ctrl.
+    maxItems: 1
+
+  pinctrl-2:
+    description:
+      should switch dat1 pin to GPIO mode.
+    maxItems: 1
+
+  hs400-ds-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS400 DS delay setting.
+    minimum: 0
+    maximum: 0xffffffff
+
+  mediatek,hs200-cmd-int-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS200 command internal delay setting.
+      This field has total 32 stages.
+      The value is an integer from 0 to 31.
+    minimum: 0
+    maximum: 31
+
+  mediatek,hs400-cmd-int-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HS400 command internal delay setting.
+      This field has total 32 stages.
+      The value is an integer from 0 to 31.
+    minimum: 0
+    maximum: 31
+
+  mediatek,hs400-cmd-resp-sel-rising:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      HS400 command response sample selection.
+      If present, HS400 command responses are sampled on rising edges.
+      If not present, HS400 command responses are sampled on falling edges.
+
+  mediatek,hs400-ds-dly3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Gear of the third delay line for DS for input data latch in data
+      pad macro, there are 32 stages from 0 to 31.
+      For different corner IC, the time is different about one step, it is
+      about 100ps.
+      The value is confirmed by doing scan and calibration to find a best
+      value with corner IC and it is valid only for HS400 mode.
+    minimum: 0
+    maximum: 31
+
+  mediatek,latch-ck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
+      data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
+      if not present, default value is 0.
+      applied to compatible "mediatek,mt2701-mmc".
+    minimum: 0
+    maximum: 7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: hrst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-names
+  - pinctrl-0
+  - pinctrl-1
+  - vmmc-supply
+  - vqmmc-supply
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2701-mmc
+            - mediatek,mt6779-mmc
+            - mediatek,mt6795-mmc
+            - mediatek,mt7620-mmc
+            - mediatek,mt7622-mmc
+            - mediatek,mt7623-mmc
+            - mediatek,mt8135-mmc
+            - mediatek,mt8173-mmc
+            - mediatek,mt8183-mmc
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+            - mediatek,mt8516-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+        clock-names:
+          minItems: 2
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mmc
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+            - description: msdc subsys clock gate
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+            - const: sys_cg
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: crypto clock used for data encrypt/decrypt (optional)
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: crypto
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: msdc subsys clock gate
+            - description: peripheral bus clock gate
+            - description: AXI bus clock gate
+            - description: AHB bus clock gate
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: sys_cg
+            - const: pclk_cg
+            - const: axi_cg
+            - const: ahb_cg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    mmc0: mmc@11230000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11230000 0x1000>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+        vmmc-supply = <&mt6397_vemc_3v3_reg>;
+        vqmmc-supply = <&mt6397_vio18_reg>;
+        clocks = <&pericfg CLK_PERI_MSDC30_0>,
+                 <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+        clock-names = "source", "hclk";
+        pinctrl-names = "default", "state_uhs";
+        pinctrl-0 = <&mmc0_pins_default>;
+        pinctrl-1 = <&mmc0_pins_uhs>;
+        assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+        hs400-ds-delay = <0x14015>;
+        mediatek,hs200-cmd-int-delay = <26>;
+        mediatek,hs400-cmd-int-delay = <14>;
+        mediatek,hs400-cmd-resp-sel-rising;
+    };
+
+    mmc3: mmc@11260000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11260000 0x1000>;
+        clock-names = "source", "hclk";
+        clocks = <&pericfg CLK_PERI_MSDC30_3>,
+                 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+        interrupt-names = "msdc", "sdio_wakeup";
+        interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+                     <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+        pinctrl-names = "default", "state_uhs", "state_eint";
+        pinctrl-0 = <&mmc2_pins_default>;
+        pinctrl-1 = <&mmc2_pins_uhs>;
+        pinctrl-2 = <&mmc2_pins_eint>;
+        bus-width = <4>;
+        max-frequency = <200000000>;
+        cap-sd-highspeed;
+        sd-uhs-sdr104;
+        keep-power-in-suspend;
+        wakeup-source;
+        cap-sdio-irq;
+        no-mmc;
+        no-sd;
+        non-removable;
+        vmmc-supply = <&sdio_fixed_3v3>;
+        vqmmc-supply = <&mt6397_vgp3_reg>;
+        mmc-pwrseq = <&wifi_pwrseq>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
new file mode 100644
index 0000000000..32e512a68e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS MMC controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
+  to support MMC, SD, and SDIO types of memory cards.
+
+  This file documents differences between the core properties in mmc.txt
+  and the properties used by the mxsmmc driver.
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-mmc
+      - fsl,imx28-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@80010000 {
+        compatible = "fsl,imx28-mmc";
+        reg = <0x80010000 2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+        bus-width = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
new file mode 100644
index 0000000000..72987f0326
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/nvidia,tegra20-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Secure Digital Host Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  This controller on Tegra family SoCs provides an interface for MMC, SD, and
+  SDIO types of memory cards.
+
+  This file documents differences between the core properties described by
+  mmc-controller.yaml and the properties for the Tegra SDHCI controller.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-sdhci
+          - nvidia,tegra30-sdhci
+          - nvidia,tegra114-sdhci
+          - nvidia,tegra124-sdhci
+          - nvidia,tegra210-sdhci
+          - nvidia,tegra186-sdhci
+          - nvidia,tegra194-sdhci
+
+      - items:
+          - const: nvidia,tegra132-sdhci
+          - const: nvidia,tegra124-sdhci
+
+      - items:
+          - enum:
+              - nvidia,tegra194-sdhci
+              - nvidia,tegra234-sdhci
+          - const: nvidia,tegra186-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sdhci
+
+  power-gpios:
+    description: specify GPIOs for power control
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  nvidia,default-tap:
+    description: Specify the default inbound sampling clock trimmer value for
+      non-tunable modes.
+
+      The values are used for compensating trace length differences by
+      adjusting the sampling point. The values are programmed to the Vendor
+      Clock Control Register. Please refer to the reference manual of the SoC
+      for correct values.
+
+      The DQS trim values are only used on controllers which support HS400
+      timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,default-trim:
+    description: Specify the default outbound clock trimmer value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,dqs-trim:
+    description: Specify DQS trim value for HS400 timing.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+
+      The property values are drive codes which are programmed into the
+      PD_OFFSET and PU_OFFSET sections of the SDHCI_TEGRA_AUTO_CAL_CONFIG
+      register. A higher value corresponds to higher drive strength. Please
+      refer to the reference manual of the SoC for correct values. The SDR104
+      and HS400 timing specific values are used in corresponding modes if
+      specified.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,only-1-8v:
+    description: The presence of this property indicates that the controller
+      operates at a 1.8 V fixed I/O voltage.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: mmc-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-sdhci
+              - nvidia,tegra30-sdhci
+              - nvidia,tegra114-sdhci
+              - nvidia,tegra124-sdhci
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+    else:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+            - description: timeout clock
+
+        clock-names:
+          items:
+            - const: sdhci
+            - const: tmclk
+      required:
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          oneOf:
+            - items:
+                - const: sdmmc-3v3
+                  description: pad configuration for 3.3 V
+                - const: sdmmc-1v8
+                  description: pad configuration for 1.8 V
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sdhci
+              - nvidia,tegra194-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: sdmmc-3v3
+              description: pad configuration for 3.3 V
+            - const: sdmmc-1v8
+              description: pad configuration for 1.8 V
+      required:
+        - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@c8000200 {
+        compatible = "nvidia,tegra20-sdhci";
+        reg = <0xc8000200 0x200>;
+        interrupts = <47>;
+        clocks = <&tegra_car 14>;
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+        wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+        power-gpios = <&gpio 155 0>; /* gpio PT3 */
+        bus-width = <8>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@700b0000 {
+        compatible = "nvidia,tegra210-sdhci";
+        reg = <0x700b0000 0x200>;
+        interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+                 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+                        "sdmmc-3v3-drv", "sdmmc-1v8-drv";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+        pinctrl-2 = <&sdmmc1_3v3_drv>;
+        pinctrl-3 = <&sdmmc1_1v8_drv>;
+        nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+        nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+        nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+        nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+        nvidia,default-tap = <0x2>;
+        nvidia,default-trim = <0x4>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+        assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
new file mode 100644
index 0000000000..1b7d88ed37
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/owl-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs SD/MMC/SDIO controller
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: actions,owl-mmc
+      - items:
+          - enum:
+              - actions,s500-mmc
+              - actions,s700-mmc
+          - const: actions,owl-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: mmc
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc0: mmc@e0330000 {
+        compatible = "actions,owl-mmc";
+        reg = <0xe0330000 0x4000>;
+        interrupts = <0 42 4>;
+        clocks = <&cmu 56>;
+        resets = <&cmu 23>;
+        dmas = <&dma 2>;
+        dma-names = "mmc";
+        bus-width = <4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
new file mode 100644
index 0000000000..66a78eae4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt
@@ -0,0 +1,25 @@
+* PXA MMC drivers
+
+Driver bindings for the PXA MCI (MMC/SDIO) interfaces
+
+Required properties:
+- compatible: Should be "marvell,pxa-mmc".
+- vmmc-supply: A regulator for VMMC
+
+Optional properties:
+- marvell,detect-delay-ms: sets the detection delay timeout in ms.
+
+In addition to the properties described in this document, the details
+described in mmc.txt are supported.
+
+Examples:
+
+mmc0: mmc@41100000 {
+	compatible = "marvell,pxa-mmc";
+	reg = <0x41100000 0x1000>;
+	interrupts = <23>;
+	vmmc-supply = <&mmc_regulator>;
+	cd-gpios = <&gpio 23 0>;
+	wp-gpios = <&gpio 24 0>;
+};
+
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
new file mode 100644
index 0000000000..024313b79e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/renesas,mmcif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Multi Media Card Interface (MMCIF) Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,mmcif-r7s72100 # RZ/A1H
+          - renesas,mmcif-r8a73a4  # R-Mobile APE6
+          - renesas,mmcif-r8a7740  # R-Mobile A1
+          - renesas,mmcif-r8a7742  # RZ/G1H
+          - renesas,mmcif-r8a7743  # RZ/G1M
+          - renesas,mmcif-r8a7744  # RZ/G1N
+          - renesas,mmcif-r8a7745  # RZ/G1E
+          - renesas,mmcif-r8a7778  # R-Car M1A
+          - renesas,mmcif-r8a7790  # R-Car H2
+          - renesas,mmcif-r8a7791  # R-Car M2-W
+          - renesas,mmcif-r8a7793  # R-Car M2-N
+          - renesas,mmcif-r8a7794  # R-Car E2
+          - renesas,mmcif-sh73a0   # SH-Mobile AG5
+      - const: renesas,sh-mmcif
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,mmcif-r7s72100
+then:
+  properties:
+    interrupts:
+      items:
+        - description: Error interrupt
+        - description: Normal operation interrupt
+        - description: Card detection interrupt
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,mmcif-r8a7740
+            - renesas,mmcif-sh73a0
+  then:
+    properties:
+      interrupts:
+        items:
+          - description: Error interrupt
+          - description: Normal operation interrupt
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,mmcif-r8a73a4
+              - renesas,mmcif-r8a7778
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    mmcif0: mmc@ee200000 {
+            compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+            reg = <0xee200000 0x80>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 315>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 315>;
+            dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, <&dmac1 0xd1>, <&dmac1 0xd2>;
+            dma-names = "tx", "rx", "tx", "rx";
+            max-frequency = <97500000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
new file mode 100644
index 0000000000..7756a8687e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SDHI SD/MMC controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,sdhi-sh73a0  # R-Mobile APE6
+      - items:
+          - const: renesas,sdhi-r7s72100 # RZ/A1H
+      - items:
+          - const: renesas,sdhi-r7s9210 # SH-Mobile AG5
+      - items:
+          - const: renesas,sdhi-r8a73a4 # R-Mobile APE6
+      - items:
+          - const: renesas,sdhi-r8a7740 # R-Mobile A1
+      - items:
+          - enum:
+              - renesas,sdhi-r8a7778 # R-Car M1
+              - renesas,sdhi-r8a7779 # R-Car H1
+          - const: renesas,rcar-gen1-sdhi # R-Car Gen1
+      - items:
+          - enum:
+              - renesas,sdhi-r8a7742  # RZ/G1H
+              - renesas,sdhi-r8a7743  # RZ/G1M
+              - renesas,sdhi-r8a7744  # RZ/G1N
+              - renesas,sdhi-r8a7745  # RZ/G1E
+              - renesas,sdhi-r8a77470 # RZ/G1C
+              - renesas,sdhi-r8a7790  # R-Car H2
+              - renesas,sdhi-r8a7791  # R-Car M2-W
+              - renesas,sdhi-r8a7792  # R-Car V2H
+              - renesas,sdhi-r8a7793  # R-Car M2-N
+              - renesas,sdhi-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-sdhi # R-Car Gen2 and RZ/G1
+      - items:
+          - const: renesas,sdhi-mmc-r8a77470 # RZ/G1C (SDHI/MMC IP)
+      - items:
+          - enum:
+              - renesas,sdhi-r8a774a1  # RZ/G2M
+              - renesas,sdhi-r8a774b1  # RZ/G2N
+              - renesas,sdhi-r8a774c0  # RZ/G2E
+              - renesas,sdhi-r8a774e1  # RZ/G2H
+              - renesas,sdhi-r8a7795   # R-Car H3
+              - renesas,sdhi-r8a7796   # R-Car M3-W
+              - renesas,sdhi-r8a77961  # R-Car M3-W+
+              - renesas,sdhi-r8a77965  # R-Car M3-N
+              - renesas,sdhi-r8a77970  # R-Car V3M
+              - renesas,sdhi-r8a77980  # R-Car V3H
+              - renesas,sdhi-r8a77990  # R-Car E3
+              - renesas,sdhi-r8a77995  # R-Car D3
+              - renesas,sdhi-r9a07g043 # RZ/G2UL
+              - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
+              - renesas,sdhi-r9a07g054 # RZ/V2L
+              - renesas,sdhi-r9a09g011 # RZ/V2M
+          - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
+      - items:
+          - enum:
+              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r8a779f0  # R-Car S4-8
+              - renesas,sdhi-r8a779g0  # R-Car V4H
+          - const: renesas,rcar-gen4-sdhi # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  clocks: true
+
+  clock-names: true
+
+  dmas:
+    minItems: 4
+    maxItems: 4
+
+  dma-names:
+    minItems: 4
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  pinctrl-0:
+    minItems: 1
+    maxItems: 2
+
+  pinctrl-1:
+    maxItems: 1
+
+  pinctrl-names: true
+
+  max-frequency: true
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,sdhi-r9a07g043
+              - renesas,sdhi-r9a07g044
+              - renesas,sdhi-r9a07g054
+              - renesas,sdhi-r9a09g011
+    then:
+      properties:
+        clocks:
+          items:
+            - description: IMCLK, SDHI channel main clock1.
+            - description: CLK_HS, SDHI channel High speed clock which operates
+                           4 times that of SDHI channel main clock1.
+            - description: IMCLK2, SDHI channel main clock2. When this clock is
+                           turned off, external SD card detection cannot be
+                           detected.
+            - description: ACLK, SDHI channel bus clock.
+        clock-names:
+          items:
+            - const: core
+            - const: clkh
+            - const: cd
+            - const: aclk
+      required:
+        - clock-names
+        - resets
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rcar-gen2-sdhi
+                - renesas,rcar-gen3-sdhi
+                - renesas,rcar-gen4-sdhi
+      then:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 3
+          clock-names:
+            minItems: 1
+            uniqueItems: true
+            items:
+              - const: core
+              - enum: [ clkh, cd ]
+              - const: cd
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 2
+          clock-names:
+            minItems: 1
+            items:
+              - const: core
+              - const: cd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,sdhi-mmc-r8a77470
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: state_uhs
+    else:
+      properties:
+        pinctrl-names:
+          minItems: 1
+          items:
+            - const: default
+            - const: state_uhs
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,sdhi-r7s72100
+              - renesas,sdhi-r7s9210
+    then:
+      required:
+        - clock-names
+      description:
+        The internal card detection logic that exists in these controllers is
+        sectioned off to be run by a separate second clock source to allow
+        the main core clock to be turned off to save power.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    sdhi0: mmc@ee100000 {
+            compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+            reg = <0xee100000 0x328>;
+            interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 314>;
+            dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>;
+            dma-names = "tx", "rx", "tx", "rx";
+            max-frequency = <195000000>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 314>;
+    };
+
+    sdhi1: mmc@ee120000 {
+             compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+             reg = <0xee120000 0x328>;
+             interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 313>;
+             dmas = <&dmac0 0xc9>, <&dmac0 0xca>, <&dmac1 0xc9>, <&dmac1 0xca>;
+             dma-names = "tx", "rx", "tx", "rx";
+             max-frequency = <195000000>;
+             power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+             resets = <&cpg 313>;
+    };
+
+    sdhi2: mmc@ee140000 {
+             compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+             reg = <0xee140000 0x100>;
+             interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 312>;
+             dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>;
+             dma-names = "tx", "rx", "tx", "rx";
+             max-frequency = <97500000>;
+             power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+             resets = <&cpg 312>;
+     };
+
+     sdhi3: mmc@ee160000 {
+              compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi";
+              reg = <0xee160000 0x100>;
+              interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+              clocks = <&cpg CPG_MOD 311>;
+              dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>;
+              dma-names = "tx", "rx", "tx", "rx";
+              max-frequency = <97500000>;
+              power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+              resets = <&cpg 311>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
new file mode 100644
index 0000000000..211cd0b0bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip designware mobile storage host controller
+
+description:
+  Rockchip uses the Synopsys designware mobile storage host controller
+  to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+  This file documents the combined properties for the core Synopsys dw mshc
+  controller that are not already included in the synopsys-dw-mshc-common.yaml
+  file and the Rockchip specific extensions.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      # for Rockchip RK2928 and before RK3288
+      - const: rockchip,rk2928-dw-mshc
+      # for Rockchip RK3288
+      - const: rockchip,rk3288-dw-mshc
+      - items:
+          - enum:
+              - rockchip,px30-dw-mshc
+              - rockchip,rk1808-dw-mshc
+              - rockchip,rk3036-dw-mshc
+              - rockchip,rk3128-dw-mshc
+              - rockchip,rk3228-dw-mshc
+              - rockchip,rk3308-dw-mshc
+              - rockchip,rk3328-dw-mshc
+              - rockchip,rk3368-dw-mshc
+              - rockchip,rk3399-dw-mshc
+              - rockchip,rk3568-dw-mshc
+              - rockchip,rk3588-dw-mshc
+              - rockchip,rv1108-dw-mshc
+              - rockchip,rv1126-dw-mshc
+          - const: rockchip,rk3288-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+    description:
+      Handle to "biu" and "ciu" clocks for the bus interface unit clock and
+      the card interface unit clock. If "ciu-drive" and "ciu-sample" are
+      specified in clock-names, it should also contain
+      handles to these clocks.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: biu
+      - const: ciu
+      - const: ciu-drive
+      - const: ciu-sample
+    description:
+      Apart from the clock-names "biu" and "ciu" two more clocks
+      "ciu-drive" and "ciu-sample" are supported. They are used
+      to control the clock phases, "ciu-sample" is required for tuning
+      high speed modes.
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,default-sample-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 360
+    default: 0
+    description:
+      The default phase to set "ciu-sample" at probing,
+      low speeds or in case where all phases work at tuning time.
+      If not specified 0 deg will be used.
+
+  rockchip,desired-num-phases:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 360
+    default: 360
+    description:
+      The desired number of times that the host execute tuning when needed.
+      If not specified, the host will do tuning for 360 times,
+      namely tuning for each degree.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    sdmmc: mmc@ff0c0000 {
+      compatible = "rockchip,rk3288-dw-mshc";
+      reg = <0xff0c0000 0x4000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+               <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+      clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+      resets = <&cru SRST_MMC0>;
+      reset-names = "reset";
+      fifo-depth = <0x100>;
+      max-frequency = <150000000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
new file mode 100644
index 0000000000..6ee78a38bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-dw-mshc
+      - samsung,exynos4412-dw-mshc
+      - samsung,exynos5250-dw-mshc
+      - samsung,exynos5420-dw-mshc
+      - samsung,exynos5420-dw-mshc-smu
+      - samsung,exynos7-dw-mshc
+      - samsung,exynos7-dw-mshc-smu
+      - axis,artpec8-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  samsung,dw-mshc-ciu-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      The divider value for the card interface unit (ciu) clock.
+
+  samsung,dw-mshc-ddr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CUI clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for double data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,dw-mshc-hs400-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description: |
+      The value of CIU TX and RX clock phase shift value for HS400 mode
+      operation.
+      Valid values for SDR and DDR CIU clock timing::
+        - valid value for tx phase shift and rx phase shift is 0 to 7.
+        - when CIU clock divider value is set to 3, all possible 8 phase shift
+          values can be used.
+        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+          phase shift clocks should be 0.
+      If missing, values from samsung,dw-mshc-ddr-timing property are used.
+
+  samsung,dw-mshc-sdr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CIU clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for single data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,read-strobe-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
+      line in Read path). If missing, default from hardware is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - samsung,dw-mshc-ddr-timing
+  - samsung,dw-mshc-sdr-timing
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-dw-mshc
+              - samsung,exynos5420-dw-mshc
+              - samsung,exynos7-dw-mshc
+              - samsung,exynos7-dw-mshc-smu
+              - axis,artpec8-dw-mshc
+    then:
+      required:
+        - samsung,dw-mshc-ciu-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12220000 {
+        compatible = "samsung,exynos5420-dw-mshc";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x12220000 0x1000>;
+        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+        clock-names = "biu", "ciu";
+        fifo-depth = <0x40>;
+        card-detect-delay = <200>;
+        samsung,dw-mshc-ciu-div = <3>;
+        samsung,dw-mshc-sdr-timing = <0 4>;
+        samsung,dw-mshc-ddr-timing = <0 2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        max-frequency = <200000000>;
+        vmmc-supply = <&ldo19_reg>;
+        vqmmc-supply = <&ldo13_reg>;
+        sd-uhs-sdr50;
+        sd-uhs-sdr104;
+        sd-uhs-ddr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
new file mode 100644
index 0000000000..5d873a60f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC SDHCI Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-sdhci
+      - samsung,exynos4210-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hsmmc
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-sdhci
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: hsmmc
+            - const: mmc_busclk.2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12510000 {
+        compatible = "samsung,exynos4210-sdhci";
+        reg = <0x12510000 0x100>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+        clock-names = "hsmmc", "mmc_busclk.2";
+        bus-width = <4>;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+        pinctrl-names = "default";
+        vmmc-supply = <&ldo21_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
new file mode 100644
index 0000000000..676a746953
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-am654.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM654 MMC Controller
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,am62-sdhci
+          - ti,am64-sdhci-4bit
+          - ti,am64-sdhci-8bit
+          - ti,am654-sdhci-5.1
+          - ti,j721e-sdhci-4bit
+          - ti,j721e-sdhci-8bit
+      - items:
+          - const: ti,j7200-sdhci-8bit
+          - const: ti,j721e-sdhci-8bit
+      - items:
+          - const: ti,j7200-sdhci-4bit
+          - const: ti,j721e-sdhci-4bit
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: Handles to input clocks
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: clk_ahb
+      - const: clk_xin
+
+  dma-coherent:
+    type: boolean
+
+  # PHY output tap delays:
+  # Used to delay the data valid window and align it to the sampling clock.
+  # Binding needs to be provided for each supported speed mode otherwise the
+  # corresponding mode will be disabled.
+
+  ti,otap-del-sel-legacy:
+    description: Output tap delay for SD/MMC legacy timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-mmc-hs:
+    description: Output tap delay for MMC high speed timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sd-hs:
+    description: Output tap delay for SD high speed timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr12:
+    description: Output tap delay for SD UHS SDR12 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr25:
+    description: Output tap delay for SD UHS SDR25 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr50:
+    description: Output tap delay for SD UHS SDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-sdr104:
+    description: Output tap delay for SD UHS SDR104 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-ddr50:
+    description: Output tap delay for SD UHS DDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-ddr52:
+    description: Output tap delay for eMMC DDR52 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-hs200:
+    description: Output tap delay for eMMC HS200 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,otap-del-sel-hs400:
+    description: Output tap delay for eMMC HS400 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  # PHY input tap delays:
+  # Used to delay the data valid window and align it to the sampling clock for
+  # modes that don't support tuning
+
+  ti,itap-del-sel-legacy:
+    description: Input tap delay for SD/MMC legacy timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-mmc-hs:
+    description: Input tap delay for MMC high speed timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sd-hs:
+    description: Input tap delay for SD high speed timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sdr12:
+    description: Input tap delay for SD UHS SDR12 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-sdr25:
+    description: Input tap delay for SD UHS SDR25 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr50:
+    description: Input tap delay for MMC DDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr52:
+    description: Input tap delay for MMC DDR52 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,trm-icp:
+    description: DLL trim select
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0xf
+
+  ti,driver-strength-ohm:
+    description: DLL drive strength in ohms
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 33
+      - 40
+      - 50
+      - 66
+      - 100
+
+  ti,strobe-sel:
+    description: strobe select delay for HS400 speed mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,clkbuf-sel:
+    description: Clock Delay Buffer Select
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,fails-without-test-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, indicates that the CD line is not connected
+      and the controller is required to be forced into Test mode
+      to set the TESTCD bit.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ti,otap-del-sel-legacy
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mmc0: mmc@4f80000 {
+            compatible = "ti,am654-sdhci-5.1";
+            reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+            power-domains = <&k3_pds 47>;
+            clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+            clock-names = "clk_ahb", "clk_xin";
+            interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+            sdhci-caps-mask = <0x80000007 0x0>;
+            mmc-ddr-1_8v;
+            ti,otap-del-sel-legacy = <0x0>;
+            ti,otap-del-sel-mmc-hs = <0x0>;
+            ti,otap-del-sel-ddr52 = <0x5>;
+            ti,otap-del-sel-hs200 = <0x5>;
+            ti,otap-del-sel-hs400 = <0x0>;
+            ti,itap-del-sel-legacy = <0x10>;
+            ti,itap-del-sel-mmc-hs = <0xa>;
+            ti,itap-del-sel-ddr52 = <0x3>;
+            ti,trm-icp = <0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
new file mode 100644
index 0000000000..a9fb0a9124
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
@@ -0,0 +1,35 @@
+* Atmel SDHCI controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
+sdhci-of-at91 driver.
+
+Required properties:
+- compatible:		Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci"
+			or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci".
+- clocks:		Phandlers to the clocks.
+- clock-names:		Must be "hclock", "multclk", "baseclk" for
+			"atmel,sama5d2-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x7-sdhci".
+
+Optional properties:
+- assigned-clocks:	The same with "multclk".
+- assigned-clock-rates	The rate of "multclk" in order to not rely on the
+			gck configuration set by previous components.
+- microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
+  inverted. The default polarity for this signal is described in the datasheet.
+  For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
+  and a capacitor (see "SDMMC I/O Calibration" chapter).
+
+Example:
+
+mmc0: sdio-host@a0000000 {
+	compatible = "atmel,sama5d2-sdhci";
+	reg = <0xa0000000 0x300>;
+	interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+	clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+	clock-names = "hclock", "multclk", "baseclk";
+	assigned-clocks = <&sdmmc0_gclk>;
+	assigned-clock-rates = <480000000>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-common.yaml b/Documentation/devicetree/bindings/mmc/sdhci-common.yaml
new file mode 100644
index 0000000000..1664615187
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-common.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SDHCI Controller Common Properties
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+
+description:
+  Common properties present on Secure Digital Host Controller Interface (SDHCI)
+  devices.
+
+properties:
+  sdhci-caps:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Additionally present SDHCI capabilities - values for SDHCI_CAPABILITIES
+      and SDHCI_CAPABILITIES_1 registers.
+
+  sdhci-caps-mask:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Masked SDHCI capabilities to remove from SDHCI_CAPABILITIES and
+      SDHCI_CAPABILITIES_1 registers.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
new file mode 100644
index 0000000000..627ee89c12
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt
@@ -0,0 +1,30 @@
+* SOCIONEXT Milbeaut SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_milbeaut driver.
+
+Required properties:
+- compatible: "socionext,milbeaut-m10v-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+  list of phandles and clock-specifier pairs.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+	"iface" - clock used for sdhci interface
+	"core"  - core clock for sdhci controller
+
+Optional properties:
+- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
+  requires the CMD_DAT_DELAY control to be enabled.
+
+Example:
+	sdhci3: mmc@1b010000 {
+		compatible = "socionext,milbeaut-m10v-sdhci-3.0";
+		reg = <0x1b010000 0x10000>;
+		interrupts = <0 265 0x4>;
+		voltage-ranges = <3300 3300>;
+		bus-width = <4>;
+		clocks = <&clk 7>, <&ahb_clk>;
+		clock-names = "core", "iface";
+		cap-sdio-irq;
+		fujitsu,cmd-dat-delay-select;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
new file mode 100644
index 0000000000..10f34aa8ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-msm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDHCI controller (sdhci-msm)
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  Secure Digital Host Controller Interface (SDHCI) present on
+  Qualcomm SOCs supports SD/MMC/SDIO devices.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdhci-msm-v4
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-sdhci
+              - qcom,msm8226-sdhci
+              - qcom,msm8953-sdhci
+              - qcom,msm8974-sdhci
+              - qcom,msm8976-sdhci
+              - qcom,msm8916-sdhci
+              - qcom,msm8992-sdhci
+              - qcom,msm8994-sdhci
+              - qcom,msm8996-sdhci
+              - qcom,msm8998-sdhci
+          - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
+      - items:
+          - enum:
+              - qcom,ipq5018-sdhci
+              - qcom,ipq5332-sdhci
+              - qcom,ipq6018-sdhci
+              - qcom,ipq9574-sdhci
+              - qcom,qcm2290-sdhci
+              - qcom,qcs404-sdhci
+              - qcom,qdu1000-sdhci
+              - qcom,sc7180-sdhci
+              - qcom,sc7280-sdhci
+              - qcom,sc8280xp-sdhci
+              - qcom,sdm630-sdhci
+              - qcom,sdm670-sdhci
+              - qcom,sdm845-sdhci
+              - qcom,sdx55-sdhci
+              - qcom,sdx65-sdhci
+              - qcom,sm6115-sdhci
+              - qcom,sm6125-sdhci
+              - qcom,sm6350-sdhci
+              - qcom,sm6375-sdhci
+              - qcom,sm8150-sdhci
+              - qcom,sm8250-sdhci
+              - qcom,sm8350-sdhci
+              - qcom,sm8450-sdhci
+              - qcom,sm8550-sdhci
+          - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
+      - description: SDC MMC clock, MCLK
+      - description: TCXO clock
+      - description: clock for Inline Crypto Engine
+      - description: SDCC bus voter clock
+      - description: reference clock for RCLK delay calibration
+      - description: sleep clock for RCLK delay calibration
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: core
+      - const: xo
+      - const: ice
+      - const: bus
+      - const: cal
+      - const: sleep
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hc_irq
+      - const: pwr_irq
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description:
+      Should specify pin control groups used for this controller.
+
+  pinctrl-1:
+    description:
+      Should specify sleep pin control groups used for this controller.
+
+  resets:
+    maxItems: 1
+
+  qcom,ddr-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DDR_CONFIG reg.
+
+  qcom,dll-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DLL_CONFIG reg.
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description: |
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: data path, sdhc to ddr
+      - description: config path, cpu to sdhc
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: sdhc-ddr
+      - const: cpu-sdhc
+
+  power-domains:
+    description: A phandle to sdhci power domain node
+    maxItems: 1
+
+  operating-points-v2: true
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdhci-msm-v4
+    then:
+      properties:
+        reg:
+          minItems: 2
+          items:
+            - description: Host controller register map
+            - description: SD Core register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 2
+          items:
+            - const: hc
+            - const: core
+            - const: cqhci
+            - const: ice
+    else:
+      properties:
+        reg:
+          minItems: 1
+          items:
+            - description: Host controller register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 1
+          items:
+            - const: hc
+            - const: cqhci
+            - const: ice
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    sdhc_2: mmc@8804000 {
+      compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+      reg = <0 0x08804000 0 0x1000>;
+
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hc_irq", "pwr_irq";
+
+      clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+               <&gcc GCC_SDCC2_APPS_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "core", "xo";
+      iommus = <&apps_smmu 0x4a0 0x0>;
+      qcom,dll-config = <0x0007642c>;
+      qcom,ddr-config = <0x80040868>;
+      power-domains = <&rpmhpd RPMHPD_CX>;
+
+      operating-points-v2 = <&sdhc2_opp_table>;
+
+      sdhc2_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        opp-19200000 {
+          opp-hz = /bits/ 64 <19200000>;
+          required-opps = <&rpmhpd_opp_min_svs>;
+        };
+
+        opp-50000000 {
+          opp-hz = /bits/ 64 <50000000>;
+          required-opps = <&rpmhpd_opp_low_svs>;
+        };
+
+        opp-100000000 {
+          opp-hz = /bits/ 64 <100000000>;
+          required-opps = <&rpmhpd_opp_svs>;
+        };
+
+        opp-202000000 {
+          opp-hz = /bits/ 64 <202000000>;
+          required-opps = <&rpmhpd_opp_svs_l1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
new file mode 100644
index 0000000000..f91e341e6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
@@ -0,0 +1,43 @@
+* TI OMAP SDHCI Controller
+
+Refer to mmc.txt for standard MMC bindings.
+
+For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning.
+
+Required properties:
+- compatible: Should be "ti,omap2430-sdhci" for omap2430 controllers
+	      Should be "ti,omap3-sdhci" for omap3 controllers
+	      Should be "ti,omap4-sdhci" for omap4 and ti81 controllers
+	      Should be "ti,omap5-sdhci" for omap5 controllers
+	      Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+	      Should be "ti,k2g-sdhci" for K2G
+	      Should be "ti,am335-sdhci" for am335x controllers
+	      Should be "ti,am437-sdhci" for am437x controllers
+- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
+	     (Not required for K2G).
+- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
+		 "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104",
+		 "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11",
+		 "hs200_1_8v",
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+
+Optional properties:
+- dmas:		List of DMA specifiers with the controller specific format as described
+		in the generic DMA client binding. A tx and rx specifier is required.
+- dma-names:	List of DMA request names. These strings correspond 1:1 with the
+		DMA specifiers listed in dmas. The string naming is to be "tx"
+		and "rx" for TX and RX DMA requests, respectively.
+
+Deprecated properties:
+- ti,non-removable: Compatible with the generic non-removable property
+
+Example:
+	mmc1: mmc@4809c000 {
+		compatible = "ti,dra7-sdhci";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
new file mode 100644
index 0000000000..09455f9fa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA SDHCI v1/v2/v3
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-380-sdhci
+    then:
+      properties:
+        regs:
+          minItems: 3
+        reg-names:
+          minItems: 3
+      required:
+        - reg-names
+    else:
+      properties:
+        regs:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+properties:
+  compatible:
+    enum:
+      - mrvl,pxav1-mmc
+      - mrvl,pxav2-mmc
+      - mrvl,pxav3-mmc
+      - marvell,armada-380-sdhci
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: sdhci
+      - const: mbus
+      - const: conf-sdio3
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: io
+      - const: core
+
+  pinctrl-names:
+    description:
+      Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
+      SDIO CMD and GPIO mode.
+    items:
+      - const: default
+      - const: state_cmd_gpio
+
+  pinctrl-0:
+    description:
+      Should contain default pinctrl.
+
+  pinctrl-1:
+    description:
+      Should switch CMD pin to GPIO mode as a high output.
+
+  mrvl,clk-delay-cycles:
+    description: Specify a number of cycles to delay for tuning.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/berlin2.h>
+    mmc@d4280800 {
+        compatible = "mrvl,pxav3-mmc";
+        reg = <0xd4280800 0x800>;
+        bus-width = <8>;
+        interrupts = <27>;
+        clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+        clock-names = "io", "core";
+        non-removable;
+        mrvl,clk-delay-cycles = <31>;
+    };
+  - |
+    mmc@d8000 {
+        compatible = "marvell,armada-380-sdhci";
+        reg-names = "sdhci", "mbus", "conf-sdio3";
+        reg = <0xd8000 0x1000>,
+              <0xdc000 0x100>,
+              <0x18454 0x4>;
+        interrupts = <0 25 0x4>;
+        clocks = <&gateclk 17>;
+        clock-names = "io";
+        mrvl,clk-delay-cycles = <0x1F>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt
new file mode 100644
index 0000000000..fd3643e7e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt
@@ -0,0 +1,18 @@
+* SPEAr SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-spear driver.
+
+Required properties:
+- compatible: "st,spear300-sdhci"
+
+Optional properties:
+- cd-gpios: card detect gpio, with zero flags.
+
+Example:
+
+	sdhci@fc000000 {
+		compatible = "st,spear300-sdhci";
+		reg = <0xfc000000 0x1000>;
+		cd-gpios = <&gpio0 6 0>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
new file mode 100644
index 0000000000..eb7eb1b529
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
@@ -0,0 +1,67 @@
+* Spreadtrum SDHCI controller (sdhci-sprd)
+
+The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
+for MMC, SD and SDIO types of cards.
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-sprd driver.
+
+Required properties:
+- compatible: Should contain "sprd,sdhci-r11".
+- reg: physical base address of the controller and length.
+- interrupts: Interrupts used by the SDHCI controller.
+- clocks: Should contain phandle for the clock feeding the SDHCI controller
+- clock-names: Should contain the following:
+	"sdio" - SDIO source clock (required)
+	"enable" - gate clock which used for enabling/disabling the device (required)
+	"2x_enable" - gate clock controlling the device for some special platforms (optional)
+
+Optional properties:
+- assigned-clocks: the same with "sdio" clock
+- assigned-clock-parents: the default parent of "sdio" clock
+- pinctrl-names: should be "default", "state_uhs"
+- pinctrl-0: should contain default/high speed pin control
+- pinctrl-1: should contain uhs mode pin control
+
+PHY DLL delays are used to delay the data valid window, and align the window
+to sampling clock. PHY DLL delays can be configured by following properties,
+and each property contains 4 cells which are used to configure the clock data
+write line delay value, clock read command line delay value, clock read data
+positive edge delay value and clock read data negative edge delay value.
+Each cell's delay value unit is cycle of the PHY clock.
+
+- sprd,phy-delay-legacy: Delay value for legacy timing.
+- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing.
+- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing.
+- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing.
+- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing.
+- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing.
+- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing.
+- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing.
+- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing.
+
+Examples:
+
+sdio0: sdio@20600000 {
+	compatible  = "sprd,sdhci-r11";
+	reg = <0 0x20600000 0 0x1000>;
+	interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+	clock-names = "sdio", "enable";
+	clocks = <&ap_clk CLK_EMMC_2X>,
+		 <&apahb_gate CLK_EMMC_EB>;
+	assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+	assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+
+	sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
new file mode 100644
index 0000000000..ccf82b4ee8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -0,0 +1,110 @@
+* STMicroelectronics sdhci-st MMC/SD controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties
+used by the sdhci-st driver.
+
+Required properties:
+- compatible:		Must be "st,sdhci" and it can be compatible to "st,sdhci-stih407"
+			to set the internal glue logic used for configuring the MMC
+			subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
+			family).
+
+- clock-names:		Should be "mmc" and "icn".  (NB: The latter is not compulsory)
+			See: Documentation/devicetree/bindings/resource-names.txt
+- clocks:		Phandle to the clock.
+			See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+- interrupts:		One mmc interrupt should be described here.
+- interrupt-names:	Should be "mmcirq".
+
+- pinctrl-names:	A pinctrl state names "default" must be defined.
+- pinctrl-0:		Phandle referencing pin configuration of the sd/emmc controller.
+			See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+- reg:			This must provide the host controller base address and it can also
+			contain the FlashSS Top register for TX/RX delay used by the driver
+			to configure DLL inside the flashSS, if so reg-names must also be
+			specified.
+
+Optional properties:
+- reg-names:		Should be "mmc" and "top-mmc-delay". "top-mmc-delay" is optional
+			for eMMC on stih407 family silicon to configure DLL inside FlashSS.
+
+- non-removable:	Non-removable slot. Also used for configuring mmcss in STiH407 SoC
+			family.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- bus-width:		Number of data lines.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- max-frequency:	Can be 200MHz, 100MHz or 50MHz (default) and used for
+			configuring the CCONFIG3 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- resets:		Phandle and reset specifier pair to softreset line of HC IP.
+			See: Documentation/devicetree/bindings/reset/reset.txt
+
+- vqmmc-supply:		Phandle to the regulator dt node, mentioned as the vcc/vdd
+			supply in eMMC/SD specs.
+
+- sd-uhs-sdr50:	To enable the SDR50 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-sdr104:	To enable the SDR104 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+- sd-uhs-ddr50:		To enable the DDR50 in the mmcss.
+			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
+
+Example:
+
+/* Example stih416e eMMC configuration */
+
+mmc0: sdhci@fe81e000 {
+	compatible	= "st,sdhci";
+	reg		= <0xfe81e000 0x1000>;
+	interrupts	= <GIC_SPI 127 IRQ_TYPE_NONE>;
+	interrupt-names	= "mmcirq";
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_mmc0>;
+	clock-names	= "mmc";
+	clocks		= <&clk_s_a1_ls 1>;
+	bus-width	= <8>
+
+/* Example SD stih407 family configuration */
+
+mmc1: sdhci@9080000 {
+	compatible	= "st,sdhci-stih407", "st,sdhci";
+	reg		= <0x09080000 0x7ff>;
+	reg-names	= "mmc";
+	interrupts	= <GIC_SPI 90 IRQ_TYPE_NONE>;
+	interrupt-names	= "mmcirq";
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_sd1>;
+	clock-names	= "mmc";
+	clocks		= <&clk_s_c0_flexgen CLK_MMC_1>;
+	resets		= <&softreset STIH407_MMC1_SOFTRESET>;
+	bus-width	= <4>;
+};
+
+/* Example eMMC stih407 family configuration */
+
+mmc0: sdhci@9060000 {
+	compatible	= "st,sdhci-stih407", "st,sdhci";
+	reg		= <0x09060000 0x7ff>, <0x9061008 0x20>;
+	reg-names	= "mmc", "top-mmc-delay";
+	interrupts	= <GIC_SPI 92 IRQ_TYPE_NONE>;
+	interrupt-names	= "mmcirq";
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_mmc0>;
+	clock-names	= "mmc";
+	clocks		= <&clk_s_c0_flexgen CLK_MMC_0>;
+	vqmmc-supply	= <&vmmc_reg>;
+	max-frequency	= <200000000>;
+	bus-width	= <8>;
+	non-removable;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci.txt b/Documentation/devicetree/bindings/mmc/sdhci.txt
new file mode 100644
index 0000000000..0e9923a640
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci.txt
@@ -0,0 +1,13 @@
+The properties specific for SD host controllers. For properties shared by MMC
+host controllers refer to the mmc[1] bindings.
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Optional properties:
+- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
+  property corresponds to the bits in the sdhci capability register. If the bit
+  is on in the mask then the bit is incorrect in the register and should be
+  turned off, before applying sdhci-caps.
+- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit
+  property corresponds to the bits in the sdhci capability register. If the
+  bit is on in the property then the bit should be turned on.
diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
new file mode 100644
index 0000000000..a43eb837f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/snps,dwcmshc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Jisheng Zhang <Jisheng.Zhang@synaptics.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-dwcmshc
+      - rockchip,rk3588-dwcmshc
+      - snps,dwcmshc-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: core clock
+      - description: bus clock for optional
+      - description: axi clock for rockchip specified
+      - description: block clock for rockchip specified
+      - description: timer clock for rockchip specified
+
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: bus
+      - const: axi
+      - const: block
+      - const: timer
+
+  resets:
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: core
+      - const: bus
+      - const: axi
+      - const: block
+      - const: timer
+
+  rockchip,txclk-tapnum:
+    description: Specify the number of delay for tx sampling.
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@fe310000 {
+      compatible = "rockchip,rk3568-dwcmshc";
+      reg = <0xfe310000 0x10000>;
+      interrupts = <0 25 0x4>;
+      clocks = <&cru 17>, <&cru 18>, <&cru 19>, <&cru 20>, <&cru 21>;
+      clock-names = "core", "bus", "axi", "block", "timer";
+      bus-width = <8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+  - |
+    mmc@aa0000 {
+      compatible = "snps,dwcmshc-sdhci";
+      reg = <0xaa000 0x1000>;
+      interrupts = <0 25 0x4>;
+      clocks = <&cru 17>, <&cru 18>;
+      clock-names = "core", "bus";
+      bus-width = <8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
new file mode 100644
index 0000000000..c71424aeac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SD/SDIO/eMMC controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    description: version 2.91, 3.1, 3.1.1, respectively
+    enum:
+      - socionext,uniphier-sd-v2.91
+      - socionext,uniphier-sd-v3.1
+      - socionext,uniphier-sd-v3.1.1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  reset-names:
+    description: |
+      There are three reset signals at maximum
+        host:   mandatory for all variants
+        bridge: exist only for version 2.91
+        hw:     optional. exist if eMMC hw reset line is available
+    oneOf:
+      - const: host
+      - items:
+          - const: host
+          - const: bridge
+      - items:
+          - const: host
+          - const: hw
+      - items:
+          - const: host
+          - const: bridge
+          - const: hw
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  socionext,syscon-uhs-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures UHS mode
+          - description: ID of SD instance
+    description:
+      A phandle to syscon with one argument that configures UHS mode.
+      The argument is the ID of SD instance.
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-sd-v2.91
+    then:
+      properties:
+        reset-names:
+          contains:
+            const: bridge
+    else:
+      properties:
+        reset-names:
+          not:
+            contains:
+              const: bridge
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - reset-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sd: mmc@5a400000 {
+        compatible = "socionext,uniphier-sd-v2.91";
+        reg = <0x5a400000 0x200>;
+        interrupts = <0 76 4>;
+        pinctrl-names = "default", "uhs";
+        pinctrl-0 = <&pinctrl_sd>;
+        pinctrl-1 = <&pinctrl_sd_uhs>;
+        clocks = <&mio_clk 0>;
+        reset-names = "host", "bridge";
+        resets = <&mio_rst 0>, <&mio_rst 3>;
+        dma-names = "rx-tx";
+        dmas = <&dmac 4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        sd-uhs-sdr12;
+        sd-uhs-sdr25;
+        sd-uhs-sdr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
new file mode 100644
index 0000000000..51e1b04e79
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/starfive,jh7110-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Designware Mobile Storage Host Controller
+
+description:
+  StarFive uses the Synopsys designware mobile storage host controller
+  to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: biu clock
+      - description: ciu clock
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  interrupts:
+    maxItems: 1
+
+  starfive,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller syscon node
+          - description: offset of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+          - description: shift of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+          - description: mask of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+    description:
+      Should be four parameters, the phandle to System Register Controller
+      syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register
+      for MMC controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - starfive,sysreg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@16010000 {
+        compatible = "starfive,jh7110-mmc";
+        reg = <0x16010000 0x10000>;
+        clocks = <&syscrg 91>,
+                 <&syscrg 93>;
+        clock-names = "biu","ciu";
+        resets = <&syscrg 64>;
+        reset-names = "reset";
+        interrupts = <74>;
+        fifo-depth = <32>;
+        fifo-watermark-aligned;
+        data-addr = <0>;
+        starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
new file mode 100644
index 0000000000..6116871667
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Ltd. Co. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus MMC Controller
+
+maintainers:
+  - Tony Huang <tonyhuang.sunplus@gmail.com>
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc0: mmc@9c003b00 {
+        compatible = "sunplus,sp7021-mmc";
+        reg = <0x9c003b00 0x180>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x4e>;
+        resets = <&rstc 0x3e>;
+        bus-width = <8>;
+        max-frequency = <52000000>;
+        non-removable;
+        disable-wp;
+        cap-mmc-highspeed;
+        mmc-ddr-3_3v;
+        no-sdio;
+        no-sd;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 0000000000..6f11b2adf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: reset
+
+  clock-frequency:
+    description:
+      Should be the frequency (in Hz) of the ciu clock.  If this
+      is specified and the ciu clock is specified then we'll try to set the ciu
+      clock to this at probe time.
+
+  fifo-depth:
+    description:
+      The maximum size of the tx/rx fifo's. If this property is not
+      specified, the default value of the fifo size is determined from the
+      controller registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  card-detect-delay:
+    description:
+      Delay in milli-seconds before detecting card after card
+      insert event. The default value is 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  data-addr:
+    description:
+      Override fifo address with value provided by DT. The default FIFO reg
+      offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+      by driver. If the controller does not follow this rule, please use
+      this property to set fifo address in device tree.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fifo-watermark-aligned:
+    description:
+      Data done irq is expected if data length is less than
+      watermark in PIO mode. But fifo watermark is requested to be aligned
+      with data length in some SoC so that TX/RX irq can be generated with
+      data done irq. Add this watermark quirk to mark this requirement and
+      force fifo watermark setting accordingly.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
new file mode 100644
index 0000000000..b13b5166d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-dw-mshc
+      - img,pistachio-dw-mshc
+      - snps,dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the sysmgr node
+          - description: register offset that controls the SDMMC clock phase
+          - description: register shift for the smplsel(drive in) setting
+    description:
+      This property is optional. Contains the phandle to System Manager block
+      that contains the SDMMC clock-phase control register. The first value is
+      the pointer to the sysmgr, the 2nd value is the register offset for the
+      SDMMC clock phase register, and the 3rd value is the bit shift for the
+      smplsel(drive in) setting.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-dw-mshc
+    then:
+      properties:
+        altr,sysmgr-syscon: true
+    else:
+      properties:
+        altr,sysmgr-syscon: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@12200000 {
+      compatible = "snps,dw-mshc";
+      reg = <0x12200000 0x1000>;
+      interrupts = <0 75 0>;
+      clocks = <&clock 351>, <&clock 132>;
+      clock-names = "biu", "ciu";
+      dmas = <&pdma 12>;
+      dma-names = "rx-tx";
+      resets = <&rst 20>;
+      reset-names = "reset";
+      vmmc-supply = <&buck8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      broken-cd;
+      bus-width = <8>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+      card-detect-delay = <200>;
+      max-frequency = <200000000>;
+      clock-frequency = <400000000>;
+      data-addr = <0x200>;
+      fifo-depth = <0x80>;
+      fifo-watermark-aligned;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
new file mode 100644
index 0000000000..7a0e9dcdc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -0,0 +1,134 @@
+* TI Highspeed MMC host controller for OMAP and 66AK2G family.
+
+The Highspeed MMC Host Controller on TI OMAP and 66AK2G family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap_hsmmc driver.
+
+Required properties:
+--------------------
+- compatible:
+ Should be "ti,omap2-hsmmc", for OMAP2 controllers
+ Should be "ti,omap3-hsmmc", for OMAP3 controllers
+ Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
+ Should be "ti,omap4-hsmmc", for OMAP4 controllers
+ Should be "ti,am33xx-hsmmc", for AM335x controllers
+ Should be "ti,k2g-hsmmc", "ti,omap4-hsmmc" for 66AK2G controllers.
+
+SoC specific required properties:
+---------------------------------
+The following are mandatory properties for OMAPs, AM33xx and AM43xx SoCs only:
+- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+		and an args specifier containing the MMC device id
+		value. This property is as per the binding,
+		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+- clocks:	Must contain an entry for each entry in clock-names. Should
+		be defined as per the he appropriate clock bindings consumer
+		usage in Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
+- clock-names:	Shall be "fck" for the functional clock,
+		and "mmchsdb_fck" for the debounce clock.
+
+
+Optional properties:
+--------------------
+- ti,dual-volt:		boolean, supports dual voltage cards
+- <supply-name>-supply:	phandle to the regulator device tree node
+			  "supply-name" examples are "vmmc",
+			  "vmmc_aux"(deprecated)/"vqmmc" etc
+- ti,non-removable:	non-removable slot (like eMMC)
+- ti,needs-special-reset:	Requires a special softreset sequence
+- ti,needs-special-hs-handling:	HSMMC IP needs special setting
+				  for handling High Speed
+- dmas:			List of DMA specifiers with the controller specific
+			format as described in the generic DMA client
+			binding. A tx and rx specifier is required.
+- dma-names:		List of DMA request names. These strings correspond
+			1:1 with the DMA specifiers listed in dmas.
+			The string naming is to be "rx" and "tx" for
+			RX and TX DMA requests, respectively.
+
+Examples:
+
+[hwmod populated DMA resources]
+
+	mmc1: mmc@4809c000 {
+		compatible = "ti,omap4-hsmmc";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		ti,dual-volt;
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		ti,non-removable;
+	};
+
+[generic DMA request binding]
+
+	mmc1: mmc@4809c000 {
+		compatible = "ti,omap4-hsmmc";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		ti,dual-volt;
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		ti,non-removable;
+		dmas = <&edma 24
+			&edma 25>;
+		dma-names = "tx", "rx";
+	};
+
+[workaround for missing swakeup on am33xx]
+
+This SOC is missing the swakeup line, it will not detect SDIO irq
+while in suspend.
+
+                             ------
+                             | PRCM |
+                              ------
+                               ^ |
+                       swakeup | | fclk
+                               | v
+       ------                -------               -----
+      | card | -- CIRQ -->  | hsmmc | -- IRQ -->  | CPU |
+       ------                -------               -----
+
+In suspend the fclk is off and the module is dysfunctional. Even register reads
+will fail. A small logic in the host will request fclk restore, when an
+external event is detected. Once the clock is restored, the host detects the
+event normally. Since am33xx doesn't have this line it never wakes from
+suspend.
+
+The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make
+this work, we need to set the named pinctrl states "default" and "idle".
+Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio
+dat1. The MMC driver will then toggle between idle and default state during
+runtime.
+
+In summary:
+1. select matching 'compatible' section, see example below.
+2. specify pinctrl states "default" and "idle", "sleep" is optional.
+3. specify the gpio irq used for detecting sdio irq in suspend
+
+If configuration is incomplete, a warning message is emitted "falling back to
+polling". Also check the "sdio irq mode" in /sys/kernel/debug/mmc0/regs. Mind
+not every application needs SDIO irq, e.g. MMC cards.
+
+	mmc1: mmc@48060100 {
+		compatible = "ti,am33xx-hsmmc";
+		...
+		pinctrl-names = "default", "idle", "sleep"
+		pinctrl-0 = <&mmc1_pins>;
+		pinctrl-1 = <&mmc1_idle>;
+		pinctrl-2 = <&mmc1_sleep>;
+		...
+		interrupts-extended = <&intc 64 &gpio2 28 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	mmc1_idle : pinmux_cirq_pin {
+		pinctrl-single,pins = <
+		        0x0f8 0x3f      /* GPIO2_28 */
+		>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt
new file mode 100644
index 0000000000..02fd31cf36
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt
@@ -0,0 +1,26 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
new file mode 100644
index 0000000000..6d1b7971d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt
@@ -0,0 +1,39 @@
+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible:	must be
+		"renesas,usdhi6rol0"
+- interrupts:	3 interrupts, named "card detect", "data" and "SDIO" must be
+		specified
+- clocks:	a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply:	a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply:	a phandle of a regulator, supplying VccQ to the card
+- pinctrl-names: Can contain a "default" entry and a "state_uhs"
+                 entry. The state_uhs entry is used together with the default
+                 entry when the board requires distinct settings for UHS speeds.
+
+- pinctrl-N: One property for each name listed in pinctrl-names, see
+             ../pinctrl/pinctrl-bindings.txt.
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+	compatible = "renesas,usdhi6rol0";
+	reg = <0xab000000 0x200>;
+	interrupts = <0 23 0x4
+		      0 24 0x4
+		      0 25 0x4>;
+	interrupt-names = "card detect", "data", "SDIO";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-power-off-card;
+	clocks = <&imclk>;
+	vmmc-supply = <&vcc_sd0>;
+	vqmmc-supply = <&vccq_sd0>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
new file mode 100644
index 0000000000..d7fb6abb3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt
@@ -0,0 +1,23 @@
+* Wondermedia WM8505/WM8650 SD/MMC Host Controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the wmt-sdmmc driver.
+
+Required properties:
+- compatible: Should be "wm,wm8505-sdhc".
+- interrupts: Two interrupts are required - regular irq and dma irq.
+
+Optional properties:
+- sdon-inverted: SD_ON bit is inverted on the controller
+
+Examples:
+
+sdhc@d800a000 {
+	compatible = "wm,wm8505-sdhc";
+	reg = <0xd800a000 0x1000>;
+	interrupts = <20 21>;
+	clocks = <&sdhc>;
+	bus-width = <4>;
+	sdon-inverted;
+};
+
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
new file mode 100644
index 0000000000..054b6b8bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/allwinner,sun4i-a10-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 NAND Controller
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-nand
+      - allwinner,sun8i-a23-nand-controller
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ahb
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rxtx
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      nand-ecc-algo:
+        const: bch
+
+      nand-ecc-step-size:
+        enum: [ 512, 1024 ]
+
+      nand-ecc-strength:
+        maximum: 80
+
+      allwinner,rb:
+        description:
+          Contains the native Ready/Busy IDs.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun6i-rtc.h>
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    nand-controller@1c03000 {
+        compatible = "allwinner,sun8i-a23-nand-controller";
+        reg = <0x01c03000 0x1000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+        clock-names = "ahb", "mod";
+        resets = <&ccu RST_BUS_NAND>;
+        reset-names = "ahb";
+        dmas = <&dma 5>;
+        dma-names = "rxtx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 0000000000..57b6957c84
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-nfc
+      - amlogic,meson-axg-nfc
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: nfc
+      - const: emmc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: device
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        enum: [512, 1024]
+
+      nand-ecc-strength:
+        enum: [8, 16, 24, 30, 40, 50, 60]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+            meson-axg-nfc 8
+
+      nand-rb:
+        maxItems: 1
+        items:
+          maximum: 0
+
+    unevaluatedProperties: false
+
+    dependencies:
+      nand-ecc-strength: [nand-ecc-step-size]
+      nand-ecc-step-size: [nand-ecc-strength]
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand-controller@ffe07800 {
+      compatible = "amlogic,meson-axg-nfc";
+      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+      reg-names = "nfc", "emmc";
+      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
+      clock-names = "core", "device";
+
+      pinctrl-0 = <&nand_pins>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-rb = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
new file mode 100644
index 0000000000..15b63bbb82
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/arasan,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arasan NAND Flash Controller with ONFI 3.1 support
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-nand-controller
+      - const: arasan,nfc-v3p10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Controller clock
+      - description: NAND bus clock
+
+  clock-names:
+    items:
+      - const: controller
+      - const: bus
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: true
+
+examples:
+  - |
+    nfc: nand-controller@ff100000 {
+        compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+        reg = <0xff100000 0x1000>;
+        clock-names = "controller", "bus";
+        clocks = <&clk200>, <&clk100>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 14 4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
new file mode 100644
index 0000000000..7bd7c55a9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PL353 NAND Controller
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl353-nand-r2p1
+
+  reg:
+    items:
+      - items:
+          - description: CS with regard to the parent ranges property
+          - description: Offset of the memory region requested by the device
+          - description: Length of the memory region requested by the device
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+        compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+        reg = <0xe000e000 0x0001000>;
+        clock-names = "memclk", "apb_pclk";
+        clocks = <&clkc 11>, <&clkc 44>;
+        ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        nfc0: nand-controller@0,0 {
+            compatible = "arm,pl353-nand-r2p1";
+            reg = <0 0 0x1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
new file mode 100644
index 0000000000..1889a4db5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
@@ -0,0 +1,17 @@
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+flash@1 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+	spi-max-frequency = <25000000>;
+	reg = <1>;
+};
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
new file mode 100644
index 0000000000..50645828ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -0,0 +1,235 @@
+Atmel NAND flash controller bindings
+
+The NAND flash controller node should be defined under the EBI bus (see
+Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt).
+One or several NAND devices can be defined under this NAND controller.
+The NAND controller might be connected to an ECC engine.
+
+* NAND controller bindings:
+
+Required properties:
+- compatible: should be one of the following
+	"atmel,at91rm9200-nand-controller"
+	"atmel,at91sam9260-nand-controller"
+	"atmel,at91sam9261-nand-controller"
+	"atmel,at91sam9g45-nand-controller"
+	"atmel,sama5d3-nand-controller"
+	"microchip,sam9x60-nand-controller"
+- ranges: empty ranges property to forward EBI ranges definitions.
+- #address-cells: should be set to 2.
+- #size-cells: should be set to 1.
+- atmel,nfc-io: phandle to the NFC IO block. Only required for sama5d3
+		controllers.
+- atmel,nfc-sram: phandle to the NFC SRAM block. Only required for sama5d3
+		  controllers.
+
+Optional properties:
+- ecc-engine: phandle to the PMECC block. Only meaningful if the SoC embeds
+	      a PMECC engine.
+
+* NAND device/chip bindings:
+
+Required properties:
+- reg: describes the CS lines assigned to the NAND device. If the NAND device
+       exposes multiple CS lines (multi-dies chips), your reg property will
+       contain X tuples of 3 entries.
+       1st entry: the CS line this NAND chip is connected to
+       2nd entry: the base offset of the memory region assigned to this
+		  device (always 0)
+       3rd entry: the memory region size (always 0x800000)
+
+Optional properties:
+- rb-gpios: the GPIO(s) used to check the Ready/Busy status of the NAND.
+- cs-gpios: the GPIO(s) used to control the CS line.
+- det-gpios: the GPIO used to detect if a Smartmedia Card is present.
+- atmel,rb: an integer identifying the native Ready/Busy pin. Only meaningful
+	    on sama5 SoCs.
+
+All generic properties are described in the generic yaml files under
+Documentation/devicetree/bindings/mtd/.
+
+* ECC engine (PMECC) bindings:
+
+Required properties:
+- compatible: should be one of the following
+	"atmel,at91sam9g45-pmecc"
+	"atmel,sama5d4-pmecc"
+	"atmel,sama5d2-pmecc"
+	"microchip,sam9x60-pmecc"
+- reg: should contain 2 register ranges. The first one is pointing to the PMECC
+       block, and the second one to the PMECC_ERRLOC block.
+
+* SAMA5 NFC I/O bindings:
+
+SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page
+operations. This interface to this logic is placed in a separate I/O range and
+should thus have its own DT node.
+
+- compatible: should be "atmel,sama5d3-nfc-io", "syscon".
+- reg: should contain the I/O range used to interact with the NFC logic.
+
+Example:
+
+	nfc_io: nfc-io@70000000 {
+		compatible = "atmel,sama5d3-nfc-io", "syscon";
+		reg = <0x70000000 0x8000000>;
+	};
+
+	pmecc: ecc-engine@ffffc070 {
+		compatible = "atmel,at91sam9g45-pmecc";
+                reg = <0xffffc070 0x490>,
+                      <0xffffc500 0x100>;
+	};
+
+	ebi: ebi@10000000 {
+		compatible = "atmel,sama5d3-ebi";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		atmel,smc = <&hsmc>;
+		reg = <0x10000000 0x10000000
+		       0x40000000 0x30000000>;
+		ranges = <0x0 0x0 0x10000000 0x10000000
+			  0x1 0x0 0x40000000 0x10000000
+			  0x2 0x0 0x50000000 0x10000000
+			  0x3 0x0 0x60000000 0x10000000>;
+		clocks = <&mck>;
+
+                nand_controller: nand-controller {
+			compatible = "atmel,sama5d3-nand-controller";
+			atmel,nfc-sram = <&nfc_sram>;
+			atmel,nfc-io = <&nfc_io>;
+			ecc-engine = <&pmecc>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges;
+
+			nand@3 {
+				reg = <0x3 0x0 0x800000>;
+				atmel,rb = <0>;
+
+				/*
+				 * Put generic NAND/MTD properties and
+				 * subnodes here.
+				 */
+			};
+		};
+	};
+
+-----------------------------------------------------------------------
+
+Deprecated bindings (should not be used in new device trees):
+
+Required properties:
+- compatible: The possible values are:
+	"atmel,at91rm9200-nand"
+	"atmel,sama5d2-nand"
+	"atmel,sama5d4-nand"
+- reg : should specify localbus address and size used for the chip,
+	and hardware ECC controller if available.
+	If the hardware ECC is PMECC, it should contain address and size for
+	PMECC and PMECC Error Location controller.
+	The PMECC lookup table address and size in ROM is optional. If not
+	specified, driver will build it in runtime.
+- atmel,nand-addr-offset : offset for the address latch.
+- atmel,nand-cmd-offset : offset for the command latch.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+
+- gpios : specifies the gpio pins to control the NAND device. detect is an
+  optional gpio and may be set to 0 if not present.
+
+Optional properties:
+- atmel,nand-has-dma : boolean to support dma transfer for nand read/write.
+- nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default.
+  Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
+  "soft_bch".
+- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware,
+  capable of BCH encoding and decoding, on devices where it is present.
+- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
+  Controller. Supported values are: 2, 4, 8, 12, 24. If the compatible string
+  is "atmel,sama5d2-nand", 32 is also valid.
+- atmel,pmecc-sector-size : sector size for ECC computation. Supported values
+  are: 512, 1024.
+- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
+  for different sector size. First one is for sector size 512, the next is for
+  sector size 1024. If not specified, driver will build the table in runtime.
+- nand-bus-width : 8 or 16 bus width if not present 8
+- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
+
+Nand Flash Controller(NFC) is an optional sub-node
+Required properties:
+- compatible : "atmel,sama5d3-nfc".
+- reg : should specify the address and size used for NFC command registers,
+        NFC registers and NFC SRAM. NFC SRAM address and size can be absent
+        if don't want to use it.
+- clocks: phandle to the peripheral clock
+Optional properties:
+- atmel,write-by-sram: boolean to enable NFC write by SRAM.
+
+Examples:
+nand0: nand@40000000,0 {
+	compatible = "atmel,at91rm9200-nand";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x40000000 0x10000000
+	       0xffffe800 0x200
+	      >;
+	atmel,nand-addr-offset = <21>;	/* ale */
+	atmel,nand-cmd-offset = <22>;	/* cle */
+	nand-on-flash-bbt;
+	nand-ecc-mode = "soft";
+	gpios = <&pioC 13 0	/* rdy */
+		 &pioC 14 0 	/* nce */
+		 0		/* cd */
+		>;
+	partition@0 {
+		...
+	};
+};
+
+/* for PMECC supported chips */
+nand0: nand@40000000 {
+	compatible = "atmel,at91rm9200-nand";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = < 0x40000000 0x10000000	/* bus addr & size */
+		0xffffe000 0x00000600	/* PMECC addr & size */
+		0xffffe600 0x00000200	/* PMECC ERRLOC addr & size */
+		0x00100000 0x00100000	/* ROM addr & size */
+		>;
+	atmel,nand-addr-offset = <21>;	/* ale */
+	atmel,nand-cmd-offset = <22>;	/* cle */
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	atmel,has-pmecc;	/* enable PMECC */
+	atmel,pmecc-cap = <2>;
+	atmel,pmecc-sector-size = <512>;
+	atmel,pmecc-lookup-table-offset = <0x8000 0x10000>;
+	gpios = <&pioD 5 0	/* rdy */
+		 &pioD 4 0	/* nce */
+		 0		/* cd */
+		>;
+	partition@0 {
+		...
+	};
+};
+
+/* for NFC supported chips */
+nand0: nand@40000000 {
+	compatible = "atmel,at91rm9200-nand";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+        ...
+        nfc@70000000 {
+		compatible = "atmel,sama5d3-nfc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&hsmc_clk>
+		reg = <
+			0x70000000 0x10000000	/* NFC Command Registers */
+			0xffffc000 0x00000070	/* NFC HSMC regs */
+			0x00200000 0x00100000	/* NFC SRAM banks */
+		>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
new file mode 100644
index 0000000000..f57e96374e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/brcm,brcmnand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB NAND Controller
+
+maintainers:
+  - Brian Norris <computersforpeace@gmail.com>
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+
+description: |
+  The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
+  flash chips. It has a memory-mapped register interface for both control
+  registers and for its data input/output buffer. On some SoCs, this controller
+  is paired with a custom DMA engine (inventively named "Flash DMA") which
+  supports basic PROGRAM and READ functions, among other features.
+
+  This controller was originally designed for STB SoCs (BCM7xxx) but is now
+  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
+  iProc/Cygnus. Its history includes several similar (but not fully register
+  compatible) versions.
+
+  -- Additional SoC-specific NAND controller properties --
+
+  The NAND controller is integrated differently on the variety of SoCs on which
+  it is found. Part of this integration involves providing status and enable
+  bits with which to control the 8 exposed NAND interrupts, as well as hardware
+  for configuring the endianness of the data bus. On some SoCs, these features
+  are handled via standard, modular components (e.g., their interrupts look like
+  a normal IRQ chip), but on others, they are controlled in unique and
+  interesting ways, sometimes with registers that lump multiple NAND-related
+  functions together. The former case can be described simply by the standard
+  interrupts properties in the main controller node. But for the latter
+  exceptional cases, we define additional 'compatible' properties and associated
+  register resources within the NAND controller node above.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,brcmnand-v2.1
+              - brcm,brcmnand-v2.2
+              - brcm,brcmnand-v4.0
+              - brcm,brcmnand-v5.0
+              - brcm,brcmnand-v6.0
+              - brcm,brcmnand-v6.1
+              - brcm,brcmnand-v6.2
+              - brcm,brcmnand-v7.0
+              - brcm,brcmnand-v7.1
+              - brcm,brcmnand-v7.2
+              - brcm,brcmnand-v7.3
+          - const: brcm,brcmnand
+      - description: BCM63138 SoC-specific NAND controller
+        items:
+          - const: brcm,nand-bcm63138
+          - enum:
+              - brcm,brcmnand-v7.0
+              - brcm,brcmnand-v7.1
+          - const: brcm,brcmnand
+      - description: iProc SoC-specific NAND controller
+        items:
+          - const: brcm,nand-iproc
+          - const: brcm,brcmnand-v6.1
+          - const: brcm,brcmnand
+      - description: BCM63168 SoC-specific NAND controller
+        items:
+          - const: brcm,nand-bcm63168
+          - const: brcm,nand-bcm6368
+          - const: brcm,brcmnand-v4.0
+          - const: brcm,brcmnand
+
+  reg:
+    minItems: 1
+    maxItems: 6
+
+  reg-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      enum: [ nand, flash-dma, flash-edu, nand-cache, nand-int-base, iproc-idm, iproc-ext ]
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: NAND CTLRDY interrupt
+      - description: FLASH_DMA_DONE (if flash DMA is available) or FLASH_EDU_DONE (if EDU is available)
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: nand_ctlrdy
+      - enum:
+          - flash_dma_done
+          - flash_edu_done
+
+  clocks:
+    maxItems: 1
+    description: reference to the clock for the NAND controller
+
+  clock-names:
+    const: nand
+
+  brcm,nand-has-wp:
+    description: >
+      Some versions of this IP include a write-protect
+      (WP) control bit. It is always available on >=
+      v7.0. Use this property to describe the rare
+      earlier versions of this core that include WP
+    type: boolean
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+      compatible:
+        const: brcm,nandcs
+
+      nand-ecc-step-size:
+        enum: [ 512, 1024 ]
+
+      brcm,nand-oob-sector-size:
+        description: |
+          integer, to denote the spare area sector size
+          expected for the ECC layout in use. This size, in
+          addition to the strength and step-size,
+          determines how the hardware BCH engine will lay
+          out the parity bytes it stores on the flash.
+          This property can be automatically determined by
+          the flash geometry (particularly the NAND page
+          and OOB size) in many cases, but when booting
+          from NAND, the boot controller has only a limited
+          number of available options for its default ECC
+          layout.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: nand-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nand-bcm63138
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: nand
+            - const: nand-int-base
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nand-bcm6368
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: nand
+            - const: nand-int-base
+            - const: nand-cache
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nand-iproc
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: nand
+            - const: iproc-idm
+            - const: iproc-ext
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+    then:
+      required:
+        - interrupt-names
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+
+examples:
+  - |
+    nand-controller@f0442800 {
+        compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
+        reg = <0xf0442800 0x600>,
+              <0xf0443000 0x100>;
+        reg-names = "nand", "flash-dma";
+        interrupt-parent = <&hif_intr2_intc>;
+        interrupts = <24>, <4>;
+        interrupt-names = "nand_ctlrdy", "flash_dma_done";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@1 {
+            compatible = "brcm,nandcs";
+            reg = <1>; // Chip select 1
+            nand-on-flash-bbt;
+            nand-ecc-strength = <12>;
+            nand-ecc-step-size = <512>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+        };
+    };
+  - |
+    nand-controller@10000200 {
+        compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
+                     "brcm,brcmnand-v4.0", "brcm,brcmnand";
+        reg = <0x10000200 0x180>,
+              <0x100000b0 0x10>,
+              <0x10000600 0x200>;
+        reg-names = "nand", "nand-int-base", "nand-cache";
+        interrupt-parent = <&periph_intc>;
+        interrupts = <50>;
+        clocks = <&periph_clk 20>;
+        clock-names = "nand";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            compatible = "brcm,nandcs";
+            reg = <0>;
+            nand-on-flash-bbt;
+            nand-ecc-strength = <1>;
+            nand-ecc-step-size = <512>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
new file mode 100644
index 0000000000..d2eada5044
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
@@ -0,0 +1,53 @@
+* Cadence NAND controller
+
+Required properties:
+  - compatible : "cdns,hp-nfc"
+  - reg : Contains two entries, each of which is a tuple consisting of a
+	  physical address and length. The first entry is the address and
+	  length of the controller register set. The second entry is the
+	  address and length of the Slave DMA data port.
+  - reg-names: should contain "reg" and "sdma"
+  - #address-cells: should be 1. The cell encodes the chip select connection.
+  - #size-cells : should be 0.
+  - interrupts : The interrupt number.
+  - clocks: phandle of the controller core clock (nf_clk).
+
+Optional properties:
+  - dmas: shall reference DMA channel associated to the NAND controller
+  - cdns,board-delay-ps : Estimated Board delay. The value includes the total
+    round trip delay for the signals and is used for deciding on values
+    associated with data read capture. The example formula for SDR mode is
+    the following:
+    board delay = RE#PAD delay + PCB trace to device + PCB trace from device
+    + DQ PAD delay
+
+Child nodes represent the available NAND chips.
+
+Required properties of NAND chips:
+  - reg: shall contain the native Chip Select ids from 0 to max supported by
+    the cadence nand flash controller
+
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
+generic bindings.
+
+Example:
+
+nand_controller: nand-controller@60000000 {
+	  compatible = "cdns,hp-nfc";
+	  #address-cells = <1>;
+	  #size-cells = <0>;
+	  reg = <0x60000000 0x10000>, <0x80000000 0x10000>;
+	  reg-names = "reg", "sdma";
+	  clocks = <&nf_clk>;
+	  cdns,board-delay-ps = <4830>;
+	  interrupts = <2 0>;
+	  nand@0 {
+	      reg = <0>;
+	      label = "nand-1";
+	  };
+	  nand@1 {
+	      reg = <1>;
+	      label = "nand-2";
+	  };
+
+};
diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
new file mode 100644
index 0000000000..edebeae1f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt
@@ -0,0 +1,94 @@
+Device tree bindings for Texas instruments Davinci/Keystone NAND controller
+
+This file provides information, what the device node for the davinci/keystone
+NAND interface contains.
+
+Documentation:
+Davinci DM646x - https://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+Kestone - https://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+
+Required properties:
+
+- compatible:			"ti,davinci-nand"
+				"ti,keystone-nand"
+
+- reg:				Contains 2 offset/length values:
+				- offset and length for the access window.
+				- offset and length for accessing the AEMIF
+				control registers.
+
+- ti,davinci-chipselect:	number of chipselect. Indicates on the
+				davinci_nand driver which chipselect is used
+				for accessing the nand.
+				Can be in the range [0-3].
+
+Recommended properties :
+
+- ti,davinci-mask-ale:		mask for ALE. Needed for executing address
+				phase. These offset will be added to the base
+				address for the chip select space the NAND Flash
+				device is connected to.
+				If not set equal to 0x08.
+
+- ti,davinci-mask-cle:		mask for CLE. Needed for executing command
+				phase. These offset will be added to the base
+				address for the chip select space the NAND Flash
+				device is connected to.
+				If not set equal to 0x10.
+
+- ti,davinci-mask-chipsel:	mask for chipselect address. Needed to mask
+				addresses for given chipselect.
+
+- nand-ecc-mode:		operation mode of the NAND ecc mode. ECC mode
+				valid values for davinci driver:
+				- "none"
+				- "soft"
+				- "hw"
+
+- ti,davinci-ecc-bits:		used ECC bits, currently supported 1 or 4.
+
+- nand-bus-width:		buswidth 8 or 16. If not present 8.
+
+- nand-on-flash-bbt:		use flash based bad block table support. OOB
+				identifier is saved in OOB area. If not present
+				false.
+
+Deprecated properties:
+
+- ti,davinci-ecc-mode:		operation mode of the NAND ecc mode. ECC mode
+				valid values for davinci driver:
+				- "none"
+				- "soft"
+				- "hw"
+
+- ti,davinci-nand-buswidth:	buswidth 8 or 16. If not present 8.
+
+- ti,davinci-nand-use-bbt:	use flash based bad block table support. OOB
+				identifier is saved in OOB area. If not present
+				false.
+
+Nand device bindings may contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail. The NAND Flash timing
+values must be programmed in the chip select’s node of AEMIF
+memory-controller (see Documentation/devicetree/bindings/memory-controllers/
+davinci-aemif.txt).
+
+Example(da850 EVM ):
+
+nand_cs3@62000000 {
+	compatible = "ti,davinci-nand";
+	reg = <0x62000000 0x807ff
+	       0x68000000 0x8000>;
+	ti,davinci-chipselect = <1>;
+	ti,davinci-mask-ale = <0>;
+	ti,davinci-mask-cle = <0>;
+	ti,davinci-mask-chipsel = <0>;
+	nand-ecc-mode = "hw";
+	ti,davinci-ecc-bits = <4>;
+	nand-on-flash-bbt;
+
+	partition@180000 {
+		label = "ubifs";
+		reg = <0x180000 0x7e80000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
new file mode 100644
index 0000000000..81f95538d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/denali,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Denali NAND controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-denali-nand
+      - socionext,uniphier-denali-nand-v5a
+      - socionext,uniphier-denali-nand-v5b
+
+  reg-names:
+    description: |
+      There are two register regions:
+        nand_data:  host data/command interface
+        denali_reg: register interface
+    items:
+      - const: nand_data
+      - const: denali_reg
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      There are three clocks:
+        nand:   controller core clock
+        nand_x: bus interface clock
+        ecc:    ECC circuit clock
+    items:
+      - const: nand
+      - const: nand_x
+      - const: ecc
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  reset-names:
+    description: |
+      There are two optional resets:
+        nand: controller core reset
+        reg:  register reset
+    oneOf:
+      - items:
+          - const: nand
+          - const: reg
+      - const: nand
+      - const: reg
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: nand-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-denali-nand
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 15
+            nand-ecc-step-size:
+              enum:
+                - 512
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5a
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+                - 24
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-denali-nand-v5b
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength:
+              enum:
+                - 8
+                - 16
+            nand-ecc-step-size:
+              enum:
+                - 1024
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@ff900000 {
+        compatible = "altr,socfpga-denali-nand";
+        reg-names = "nand_data", "denali_reg";
+        reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
+        interrupts = <0 144 4>;
+        clock-names = "nand", "nand_x", "ecc";
+        clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+        reset-names = "nand", "reg";
+        resets = <&nand_rst>, <&nand_reg_rst>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/diskonchip.txt b/Documentation/devicetree/bindings/mtd/diskonchip.txt
new file mode 100644
index 0000000000..3e13bfdbea
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/diskonchip.txt
@@ -0,0 +1,15 @@
+M-Systems and Sandisk DiskOnChip devices
+
+M-System DiskOnChip G3
+======================
+The Sandisk (formerly M-Systems) docg3 is a nand device of 64M to 256MB.
+
+Required properties:
+ - compatible: should be "m-systems,diskonchip-g3"
+ - reg: register base and size
+
+Example:
+	docg3: flash@0 {
+		compatible = "m-systems,diskonchip-g3";
+		reg = <0x0 0x2000>;
+	};
diff --git a/Documentation/devicetree/bindings/mtd/flctl-nand.txt b/Documentation/devicetree/bindings/mtd/flctl-nand.txt
new file mode 100644
index 0000000000..427f46dc60
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/flctl-nand.txt
@@ -0,0 +1,49 @@
+FLCTL NAND controller
+
+Required properties:
+- compatible : "renesas,shmobile-flctl-sh7372"
+- reg : Address range of the FLCTL
+- interrupts : flste IRQ number
+- nand-bus-width : bus width to NAND chip
+
+Optional properties:
+- dmas: DMA specifier(s)
+- dma-names: name for each DMA specifier. Valid names are
+	     "data_tx", "data_rx", "ecc_tx", "ecc_rx"
+
+The DMA fields are not used yet in the driver but are listed here for
+completing the bindings.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+	flctl@e6a30000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "renesas,shmobile-flctl-sh7372";
+		reg = <0xe6a30000 0x100>;
+		interrupts = <0x0d80>;
+
+		nand-bus-width = <16>;
+
+		dmas = <&dmac 1 /* data_tx */
+			&dmac 2;> /* data_rx */
+		dma-names = "data_tx", "data_rx";
+
+		system@0 {
+			label = "system";
+			reg = <0x0 0x8000000>;
+		};
+
+		userdata@8000000 {
+			label = "userdata";
+			reg = <0x8000000 0x10000000>;
+		};
+
+		cache@18000000 {
+			label = "cache";
+			reg = <0x18000000 0x8000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
new file mode 100644
index 0000000000..25f07c1f9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt
@@ -0,0 +1,67 @@
+Freescale Localbus UPM programmed to work with NAND flash
+
+Required properties:
+- compatible : "fsl,upm-nand".
+- reg : should specify localbus chip select and size used for the chip.
+- fsl,upm-addr-offset : UPM pattern offset for the address latch.
+- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
+
+Optional properties:
+- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support.
+	The corresponding address lines are used to select the chip.
+- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
+	(R/B#). For multi-chip devices, "n" GPIO definitions are required
+	according to the number of chips.
+
+Deprecated properties:
+- fsl,upm-wait-flags : add chip-dependent short delays after running the
+	UPM pattern (0x1), after writing a data byte (0x2) or after
+	writing out a buffer (0x4).
+- chip-delay : chip dependent delay for transferring data from array to
+	read registers (tR). Required if property "gpios" is not used
+	(R/B# pins not connected).
+
+Each flash chip described may optionally contain additional sub-nodes
+describing partitions of the address space. See partition.txt for more
+detail.
+
+Examples:
+
+upm@1,0 {
+	compatible = "fsl,upm-nand";
+	reg = <1 0 1>;
+	fsl,upm-addr-offset = <16>;
+	fsl,upm-cmd-offset = <8>;
+	gpios = <&qe_pio_e 18 0>;
+
+	flash {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "...";
+
+		partition@0 {
+			...
+		};
+	};
+};
+
+upm@3,0 {
+	#address-cells = <0>;
+	#size-cells = <0>;
+	compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
+	reg = <3 0x0 0x800>;
+	fsl,upm-addr-offset = <0x10>;
+	fsl,upm-cmd-offset = <0x08>;
+	/* Multi-chip NAND device */
+	fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
+
+	nand@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			    label = "fs";
+			    reg = <0x00000000 0x10000000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
new file mode 100644
index 0000000000..6762d3c4d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -0,0 +1,60 @@
+ST Microelectronics Flexible Static Memory Controller (FSMC)
+NAND Interface
+
+Required properties:
+- compatible : "st,spear600-fsmc-nand", "stericsson,fsmc-nand"
+- reg : Address range of the mtd chip
+- reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
+
+Optional properties:
+- bank-width : Width (in bytes) of the device.  If not present, the width
+  defaults to 1 byte
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
+- timings: array of 6 bytes for NAND timings. The meanings of these bytes
+  are:
+  byte 0 TCLR  : CLE to RE delay in number of AHB clock cycles, only 4 bits
+                 are valid. Zero means one clockcycle, 15 means 16 clock
+                 cycles.
+  byte 1 TAR   : ALE to RE delay, 4 bits are valid. Same format as TCLR.
+  byte 2 THIZ  : number of HCLK clock cycles during which the data bus is
+                 kept in Hi-Z (tristate) after the start of a write access.
+                 Only valid for write transactions. Zero means zero cycles,
+                 255 means 255 cycles.
+  byte 3 THOLD : number of HCLK clock cycles to hold the address (and data
+                 when writing) after the command deassertation. Zero means
+                 one cycle, 255 means 256 cycles.
+  byte 4 TWAIT : number of HCLK clock cycles to assert the command to the
+                 NAND flash in response to SMWAITn. Zero means 1 cycle,
+                 255 means 256 cycles.
+  byte 5 TSET  : number of HCLK clock cycles to assert the address before the
+                 command is asserted. Zero means one cycle, 255 means 256
+                 cycles.
+- bank: default NAND bank to use (0-3 are valid, 0 is the default).
+- nand-ecc-mode      : see nand-controller.yaml
+- nand-ecc-strength  : see nand-controller.yaml
+- nand-ecc-step-size : see nand-controller.yaml
+
+Can support 1-bit HW ECC (default) or if stronger correction is required,
+software-based BCH.
+
+Example:
+
+	fsmc: flash@d1800000 {
+		compatible = "st,spear600-fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xd1800000 0x1000	/* FSMC Register */
+		       0xd2000000 0x0010	/* NAND Base DATA */
+		       0xd2020000 0x0010	/* NAND Base ADDR */
+		       0xd2010000 0x0010>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+
+		bank-width = <1>;
+		nand-skip-bbtscan;
+		timings = /bits/ 8 <0 0 0 2 3 0>;
+		bank = <1>;
+
+		partition@0 {
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
new file mode 100644
index 0000000000..486a17d533
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt
@@ -0,0 +1,47 @@
+GPIO assisted NAND flash
+
+The GPIO assisted NAND flash uses a memory mapped interface to
+read/write the NAND commands and data and GPIO pins for the control
+signals.
+
+Required properties:
+- compatible : "gpio-control-nand"
+- reg : should specify localbus chip select and size used for the chip.  The
+  resource describes the data bus connected to the NAND flash and all accesses
+  are made in native endianness.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- gpios : Specifies the GPIO pins to control the NAND device.  The order of
+  GPIO references is:  RDY, nCE, ALE, CLE, and nWP. nCE and nWP are optional.
+
+Optional properties:
+- bank-width : Width (in bytes) of the device.  If not present, the width
+  defaults to 1 byte.
+- chip-delay : chip dependent delay for transferring data from array to
+  read registers (tR).  If not present then a default of 20us is used.
+- gpio-control-nand,io-sync-reg : A 64-bit physical address for a read
+  location used to guard against bus reordering with regards to accesses to
+  the GPIO's and the NAND flash data bus.  If present, then after changing
+  GPIO state and before and after command byte writes, this register will be
+  read to ensure that the GPIO accesses have completed.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Examples:
+
+gpio-nand@1,0 {
+	compatible = "gpio-control-nand";
+	reg = <1 0x0000 0x2>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	gpios = <&banka 1 0>,	/* RDY */
+		<0>, 		/* nCE */
+		<&banka 3 0>, 	/* ALE */
+		<&banka 4 0>, 	/* CLE */
+		<0>;		/* nWP */
+
+	partition@0 {
+	...
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
new file mode 100644
index 0000000000..ba086c3462
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale General-Purpose Media Interface (GPMI)
+
+maintainers:
+  - Han Xu <han.xu@nxp.com>
+
+description: |
+  The GPMI nand controller provides an interface to control the NAND
+  flash chips. The device tree may optionally contain sub-nodes
+  describing partitions of the address space. See partition.txt for
+  more detail.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-gpmi-nand
+          - fsl,imx28-gpmi-nand
+          - fsl,imx6q-gpmi-nand
+          - fsl,imx6sx-gpmi-nand
+          - fsl,imx7d-gpmi-nand
+      - items:
+          - enum:
+              - fsl,imx8mm-gpmi-nand
+              - fsl,imx8mn-gpmi-nand
+          - const: fsl,imx7d-gpmi-nand
+
+  reg:
+    items:
+      - description: Address and length of gpmi block.
+      - description: Address and length of bch block.
+
+  reg-names:
+    items:
+      - const: gpmi-nand
+      - const: bch
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: bch
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  fsl,use-minimum-ecc:
+    type: boolean
+    description: |
+      Protect this NAND flash with the minimum ECC strength required.
+      The required ECC strength is automatically discoverable for some
+      flash (e.g., according to the ONFI standard). However, note that
+      if this strength is not discoverable or this property is not enabled,
+      the software may chooses an implementation-defined ECC scheme.
+
+  fsl,no-blockmark-swap:
+    type: boolean
+    description: |
+      Don't swap the bad block marker from the OOB area with the byte in
+      the data area but rely on the flash based BBT for identifying bad blocks.
+      NOTE: this is only valid in conjunction with 'nand-on-flash-bbt'.
+      WARNING: on i.MX28 blockmark swapping cannot be disabled for the BootROM
+      in the FCB. Thus, partitions written from Linux with this feature turned
+      on may not be accessible by the BootROM code.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: nand-controller.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-gpmi-nand
+              - fsl,imx28-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+        clock-names:
+          items:
+            - const: gpmi_io
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-gpmi-nand
+              - fsl,imx6sx-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi apb clock
+            - description: SoC gpmi bch clock
+            - description: SoC gpmi bch apb clock
+            - description: SoC per1 bch clock
+        clock-names:
+          items:
+            - const: gpmi_io
+            - const: gpmi_apb
+            - const: gpmi_bch
+            - const: gpmi_bch_apb
+            - const: per1_bch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7d-gpmi-nand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: SoC gpmi io clock
+            - description: SoC gpmi bch apb clock
+        clock-names:
+          items:
+            - const: gpmi_io
+            - const: gpmi_bch_apb
+
+examples:
+  - |
+    nand-controller@8000c000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-gpmi-nand";
+        reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+        reg-names = "gpmi-nand", "bch";
+        interrupts = <41>;
+        interrupt-names = "bch";
+        clocks = <&clks 50>;
+        clock-names = "gpmi_io";
+        dmas = <&dma_apbh 4>;
+        dma-names = "rx-tx";
+    };
diff --git a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
new file mode 100644
index 0000000000..8963983ae7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
@@ -0,0 +1,47 @@
+Hisilicon Hip04 Soc NAND controller DT binding
+
+Required properties:
+
+- compatible:          Should be "hisilicon,504-nfc".
+- reg:                 The first contains base physical address and size of
+                       NAND controller's registers. The second contains base
+                       physical address and size of NAND controller's buffer.
+- interrupts:          Interrupt number for nfc.
+- nand-bus-width:      See nand-controller.yaml.
+- nand-ecc-mode:       Support none and hw ecc mode.
+- #address-cells:      Partition address, should be set 1.
+- #size-cells:         Partition size, should be set 1.
+
+Optional properties:
+
+- nand-ecc-strength:   Number of bits to correct per ECC step.
+- nand-ecc-step-size:  Number of data bytes covered by a single ECC step.
+
+The following ECC strength and step size are currently supported:
+
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
+
+Flash chip may optionally contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail.
+
+Example:
+
+	nand: nand@4020000 {
+		compatible = "hisilicon,504-nfc";
+		reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+		interrupts = <0 379 4>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "nand_text";
+			reg = <0x00000000 0x00400000>;
+		};
+
+		...
+
+	};
diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
new file mode 100644
index 0000000000..a99de13c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
@@ -0,0 +1,24 @@
+HiSilicon SPI-NOR Flash Controller
+
+Required properties:
+- compatible : Should be "hisilicon,fmc-spi-nor" and one of the following strings:
+		"hisilicon,hi3519-spi-nor"
+- address-cells : Should be 1.
+- size-cells : Should be 0.
+- reg : Offset and length of the register set for the controller device.
+- reg-names : Must include the following two entries: "control", "memory".
+- clocks : handle to spi-nor flash controller clock.
+
+Example:
+spi-nor-controller@10000000 {
+	compatible = "hisilicon,hi3519-spi-nor", "hisilicon,fmc-spi-nor";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
+	reg-names = "control", "memory";
+	clocks = <&clock HI3519_FMC_CLK>;
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/ibm,ndfc.txt b/Documentation/devicetree/bindings/mtd/ibm,ndfc.txt
new file mode 100644
index 0000000000..869f0b5f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ibm,ndfc.txt
@@ -0,0 +1,39 @@
+AMCC NDFC (NanD Flash Controller)
+
+Required properties:
+- compatible : "ibm,ndfc".
+- reg : should specify chip select and size used for the chip (0x2000).
+
+Optional properties:
+- ccr : NDFC config and control register value (default 0).
+- bank-settings : NDFC bank configuration register value (default 0).
+
+Notes:
+- partition(s) - follows the OF MTD standard for partitions
+
+Example:
+
+ndfc@1,0 {
+	compatible = "ibm,ndfc";
+	reg = <0x00000001 0x00000000 0x00002000>;
+	ccr = <0x00001000>;
+	bank-settings = <0x80002222>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	nand {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "kernel";
+			reg = <0x00000000 0x00200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x00200000 0x03E00000>;
+		};
+	};
+};
+
+
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
new file mode 100644
index 0000000000..b9312ebefe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: nand-controller.yaml#
+  - $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4740-nand
+      - ingenic,jz4725b-nand
+      - ingenic,jz4780-nand
+
+  reg:
+    items:
+      - description: Bank number, offset and size of first attached NAND chip
+      - description: Bank number, offset and size of second attached NAND chip
+      - description: Bank number, offset and size of third attached NAND chip
+      - description: Bank number, offset and size of fourth attached NAND chip
+    minItems: 1
+
+  ecc-engine: true
+
+  partitions:
+    type: object
+    deprecated: true
+    description:
+      Node containing description of fixed partitions.
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+
+      rb-gpios:
+        description: GPIO specifier for the busy pin.
+        maxItems: 1
+
+      wp-gpios:
+        description: GPIO specifier for the write-protect pin.
+        maxItems: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    memory-controller@13410000 {
+        compatible = "ingenic,jz4780-nemc";
+        reg = <0x13410000 0x10000>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0 0x1b000000 0x1000000>,
+                 <2 0 0x1a000000 0x1000000>,
+                 <3 0 0x19000000 0x1000000>,
+                 <4 0 0x18000000 0x1000000>,
+                 <5 0 0x17000000 0x1000000>,
+                 <6 0 0x16000000 0x1000000>;
+
+        clocks = <&cgu JZ4780_CLK_NEMC>;
+
+        nand-controller@1 {
+            compatible = "ingenic,jz4780-nand";
+            reg = <1 0 0x1000000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ecc-engine = <&bch>;
+
+            ingenic,nemc-tAS = <10>;
+            ingenic,nemc-tAH = <5>;
+            ingenic,nemc-tBP = <10>;
+            ingenic,nemc-tAW = <15>;
+            ingenic,nemc-tSTRV = <100>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pins_nemc>;
+
+            nand@1 {
+                reg = <1>;
+
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+                nand-ecc-mode = "hw";
+                nand-on-flash-bbt;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pins_nemc_cs1>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <2>;
+                    #size-cells = <2>;
+
+                    partition@0 {
+                        label = "u-boot-spl";
+                        reg = <0x0 0x0 0x0 0x800000>;
+                    };
+
+                    partition@800000 {
+                        label = "u-boot";
+                        reg = <0x0 0x800000 0x0 0x200000>;
+                    };
+
+                    partition@a00000 {
+                        label = "u-boot-env";
+                        reg = <0x0 0xa00000 0x0 0x200000>;
+                    };
+
+                    partition@c00000 {
+                        label = "boot";
+                        reg = <0x0 0xc00000 0x0 0x4000000>;
+                    };
+
+                    partition@4c00000 {
+                        label = "system";
+                        reg = <0x0 0x4c00000 0x1 0xfb400000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
new file mode 100644
index 0000000000..07bc7e3efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/intel,lgm-ebunand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM SoC NAND Controller
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-ebunand
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: ebunand
+      - const: hsnand
+      - const: nand_cs0
+      - const: nand_cs1
+      - const: addr_sel0
+      - const: addr_sel1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-algo:
+        const: hw
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@e0f00000 {
+        compatible = "intel,lgm-ebunand";
+        reg = <0xe0f00000 0x100>,
+              <0xe1000000 0x300>,
+              <0xe1400000 0x8000>,
+              <0xe1c00000 0x1000>,
+              <0x17400000 0x4>,
+              <0x17c00000 0x4>;
+        reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1",
+                    "addr_sel0", "addr_sel1";
+        clocks = <&cgu0 125>;
+        dmas = <&dma0 8>, <&dma0 9>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-ecc-mode = "hw";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
new file mode 100644
index 0000000000..58f0cea160
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI NOR flash ST M25Pxx (and similar) serial flash chips
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: mtd.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: "^((((micron|spansion|st),)?\
+              (m25p(40|80|16|32|64|128)|\
+              n25q(32b|064|128a11|128a13|256a|512a|164k)))|\
+              atmel,at25df(321a|641|081a)|\
+              everspin,mr25h(10|40|128|256)|\
+              (mxicy|macronix),mx25l(4005a|1606e|6405d|8005|12805d|25635e)|\
+              (mxicy|macronix),mx25u(4033|4035)|\
+              (spansion,)?s25fl(128s|256s1|512s|008k|064k|164k)|\
+              (sst|microchip),sst25vf(016b|032b|040b)|\
+              (sst,)?sst26wf016b|\
+              (sst,)?sst25wf(040b|080)|\
+              winbond,w25x(80|32)|\
+              (winbond,)?w25q(16|32(w|dw)?|64(dw)?|80bl|128(fw)?|256))$"
+          - const: jedec,spi-nor
+      - items:
+          - enum:
+              - issi,is25lp016d
+              - micron,mt25qu02g
+              - mxicy,mx25r1635f
+              - mxicy,mx25u6435f
+              - mxicy,mx25v8035f
+              - spansion,s25sl12801
+              - spansion,s25fs512s
+          - const: jedec,spi-nor
+      - const: jedec,spi-nor
+    description:
+      SPI NOR flashes compatible with the JEDEC SFDP standard or which may be
+      identified with the READ ID opcode (0x9F) do not deserve a specific
+      compatible. They should instead only be matched against the generic
+      "jedec,spi-nor" compatible.
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  m25p,fast-read:
+    type: boolean
+    description:
+      Use the "fast read" opcode to read data from the chip instead of the usual
+      "read" opcode. This opcode is not supported by all chips and support for
+      it can not be detected at runtime. Refer to your chips' datasheet to check
+      if this is supported by your chip.
+
+  broken-flash-reset:
+    type: boolean
+    description:
+      Some flash devices utilize stateful addressing modes (e.g., for 32-bit
+      addressing) which need to be managed carefully by a system. Because these
+      sorts of flash don't have a standardized software reset command, and
+      because some systems don't toggle the flash RESET# pin upon system reset
+      (if the pin even exists at all), there are systems which cannot reboot
+      properly if the flash is left in the "wrong" state. This boolean flag can
+      be used on such systems, to denote the absence of a reliable reset
+      mechanism.
+
+  no-wp:
+    type: boolean
+    description:
+      The status register write disable (SRWD) bit in status register, combined
+      with the WP# signal, provides hardware data protection for the device. When
+      the SRWD bit is set to 1, and the WP# signal is either driven LOW or hard
+      strapped to LOW, the status register nonvolatile bits become read-only and
+      the WRITE STATUS REGISTER operation will not execute. The only way to exit
+      this hardware-protected mode is to drive WP# HIGH. If the WP# signal of the
+      flash device is not connected or is wrongly tied to GND (that includes internal
+      pull-downs) then status register permanently becomes read-only as the SRWD bit
+      cannot be reset. This boolean flag can be used on such systems to avoid setting
+      the SRWD bit while writing the status register. WP# signal hard strapped to GND
+      can be a valid use case.
+
+  reset-gpios:
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      If "broken-flash-reset" is present then having this property does not
+      make any difference.
+
+  spi-cpol: true
+  spi-cpha: true
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+            m25p,fast-read;
+            reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
new file mode 100644
index 0000000000..64c06aa05a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
@@ -0,0 +1,50 @@
+NXP LPC32xx SoC NAND MLC controller
+
+Required properties:
+- compatible: "nxp,lpc3220-mlc"
+- reg: Address and size of the controller
+- interrupts: The NAND interrupt specification
+- gpios: GPIO specification for NAND write protect
+
+The following required properties are very controller specific. See the LPC32xx
+User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in
+Hz, to make them independent of actual clock speed and to provide for good
+accuracy:)
+- nxp,tcea_delay: TCEA_DELAY
+- nxp,busy_delay: BUSY_DELAY
+- nxp,nand_ta: NAND_TA
+- nxp,rd_high: RD_HIGH
+- nxp,rd_low: RD_LOW
+- nxp,wr_high: WR_HIGH
+- nxp,wr_low: WR_LOW
+
+Optional subnodes:
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
+
+Example:
+
+	mlc: flash@200a8000 {
+		compatible = "nxp,lpc3220-mlc";
+		reg = <0x200A8000 0x11000>;
+		interrupts = <11 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nxp,tcea-delay = <333333333>;
+		nxp,busy-delay = <10000000>;
+		nxp,nand-ta = <18181818>;
+		nxp,rd-high = <31250000>;
+		nxp,rd-low = <45454545>;
+		nxp,wr-high = <40000000>;
+		nxp,wr-low = <83333333>;
+		gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+		mtd0@00000000 {
+			label = "boot";
+			reg = <0x00000000 0x00064000>;
+			read-only;
+		};
+
+		...
+
+	};
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt
new file mode 100644
index 0000000000..39f17630a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt
@@ -0,0 +1,52 @@
+NXP LPC32xx SoC NAND SLC controller
+
+Required properties:
+- compatible: "nxp,lpc3220-slc"
+- reg: Address and size of the controller
+- nand-on-flash-bbt: Use bad block table on flash
+- gpios: GPIO specification for NAND write protect
+
+The following required properties are very controller specific. See the LPC32xx
+User Manual:
+- nxp,wdr-clks: Delay before Ready signal is tested on write (W_RDY)
+- nxp,rdr-clks: Delay before Ready signal is tested on read (R_RDY)
+(The following values are specified in Hz, to make them independent of actual
+clock speed:)
+- nxp,wwidth: Write pulse width (W_WIDTH)
+- nxp,whold: Write hold time (W_HOLD)
+- nxp,wsetup: Write setup time (W_SETUP)
+- nxp,rwidth: Read pulse width (R_WIDTH)
+- nxp,rhold: Read hold time (R_HOLD)
+- nxp,rsetup: Read setup time (R_SETUP)
+
+Optional subnodes:
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
+
+Example:
+
+	slc: flash@20020000 {
+		compatible = "nxp,lpc3220-slc";
+		reg = <0x20020000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nxp,wdr-clks = <14>;
+		nxp,wwidth = <40000000>;
+		nxp,whold = <100000000>;
+		nxp,wsetup = <100000000>;
+		nxp,rdr-clks = <14>;
+		nxp,rwidth = <40000000>;
+		nxp,rhold = <66666666>;
+		nxp,rsetup = <100000000>;
+		nand-on-flash-bbt;
+		gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+		mtd0@00000000 {
+			label = "phy3250-boot";
+			reg = <0x00000000 0x00064000>;
+			read-only;
+		};
+
+		...
+
+	};
diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
new file mode 100644
index 0000000000..1ecea848e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell NAND Flash Controller (NFC)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: marvell,armada-8k-nand-controller
+          - const: marvell,armada370-nand-controller
+      - enum:
+          - marvell,ac5-nand-controller
+          - marvell,armada370-nand-controller
+          - marvell,pxa3xx-nand-controller
+      - description: legacy bindings
+        deprecated: true
+        enum:
+          - marvell,armada-8k-nand
+          - marvell,armada370-nand
+          - marvell,pxa3xx-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Shall reference the NAND controller clocks, the second one is
+      is only needed for the Armada 7K/8K SoCs
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: data
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Syscon node that handles NAND controller related registers
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+      nand-rb:
+        items:
+          - minimum: 0
+            maximum: 1
+
+      nand-ecc-step-size:
+        const: 512
+
+      nand-ecc-strength:
+        enum: [1, 4, 8, 12, 16]
+
+      nand-ecc-mode:
+        const: hw
+
+      marvell,nand-keep-config:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Orders the driver not to take the timings from the core and
+          leaving them completely untouched. Bootloader timings will then
+          be used.
+
+      marvell,nand-enable-arbiter:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          To enable the arbiter, all boards blindly used it,
+          this bit was set by the bootloader for many boards and even if
+          it is marked reserved in several datasheets, it might be needed to set
+          it (otherwise it is harmless).
+        deprecated: true
+
+    required:
+      - reg
+      - nand-rb
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,pxa3xx-nand-controller
+    then:
+      required:
+        - dmas
+        - dma-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-nand-controller
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - marvell,system-controller
+
+    else:
+      properties:
+        clocks:
+          minItems: 1
+
+        clock-names:
+          minItems: 1
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand_controller: nand-controller@d0000 {
+        compatible = "marvell,armada370-nand-controller";
+        reg = <0xd0000 0x54>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&coredivclk 0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "main-storage";
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            marvell,nand-keep-config;
+            nand-on-flash-bbt;
+            nand-ecc-strength = <4>;
+            nand-ecc-step-size = <512>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "Rootfs";
+                    reg = <0x00000000 0x40000000>;
+                };
+            };
+        };
+    };
+
+  - |
+    cp0_nand_controller: nand-controller@720000 {
+        compatible = "marvell,armada-8k-nand-controller",
+                "marvell,armada370-nand-controller";
+        reg = <0x720000 0x54>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "core", "reg";
+        clocks = <&cp0_clk 1 2>,
+                 <&cp0_clk 1 17>;
+        marvell,system-controller = <&cp0_syscon0>;
+
+        nand@0 {
+            reg = <0>;
+            label = "main-storage";
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            nand-ecc-strength = <8>;
+            nand-ecc-step-size = <512>;
+        };
+    };
+
+  - |
+    nand-controller@43100000 {
+        compatible = "marvell,pxa3xx-nand-controller";
+        reg = <0x43100000 90>;
+        interrupts = <45>;
+        clocks = <&clks 1>;
+        clock-names = "core";
+        dmas = <&pdma 97 3>;
+        dma-names = "data";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand@0 {
+            reg = <0>;
+            nand-rb = <0>;
+            nand-ecc-mode = "hw";
+            marvell,nand-keep-config;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
new file mode 100644
index 0000000000..ab503a33a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC)
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-nfc
+      - mediatek,mt2712-nfc
+      - mediatek,mt7622-nfc
+
+  reg:
+    items:
+      - description: Base physical address and size of NFI.
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    items:
+      - description: clock used for the controller
+      - description: clock used for the pad
+
+  clock-names:
+    items:
+      - const: nfi_clk
+      - const: pad_clk
+
+  ecc-engine:
+    description: device-tree node of the required ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    $ref: raw-nand-chip.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maximum: 1
+      nand-ecc-mode:
+        const: hw
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2701-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60, 68, 72, 80]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              const: 512
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        nand-controller@1100d000 {
+            compatible = "mediatek,mt2701-nfc";
+            reg = <0 0x1100d000 0 0x1000>;
+            interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI>,
+                     <&pericfg CLK_PERI_NFI_PAD>;
+            clock-names = "nfi_clk", "pad_clk";
+            ecc-engine = <&bch>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@0 {
+                reg = <0>;
+
+                nand-on-flash-bbt;
+                nand-ecc-mode = "hw";
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    preloader@0 {
+                        label = "pl";
+                        read-only;
+                        reg = <0x0 0x400000>;
+                    };
+                    android@400000 {
+                        label = "android";
+                        reg = <0x400000 0x12c00000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
new file mode 100644
index 0000000000..505baf1e88
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs NAND ECC engine
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+description: |
+  MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-ecc
+      - mediatek,mt2712-ecc
+      - mediatek,mt7622-ecc
+      - mediatek,mt7986-ecc
+
+  reg:
+    items:
+      - description: Base physical address and size of ECC.
+
+  interrupts:
+    items:
+      - description: ECC interrupt
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: nfiecc_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bch: ecc@1100e000 {
+            compatible = "mediatek,mt2701-ecc";
+            reg = <0 0x1100e000 0 0x1000>;
+            interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI_ECC>;
+            clock-names = "nfiecc_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
new file mode 100644
index 0000000000..7328eb92a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
@@ -0,0 +1,18 @@
+* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM
+
+Required properties:
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
+- reg : Chip-Select number
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
+
+Example:
+
+	spi-sram@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "microchip,mchp23k256";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
new file mode 100644
index 0000000000..0ff32bd00b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 48l640 (and similar) serial EERAM
+
+maintainers:
+  - Heiko Schocher <hs@denx.de>
+
+description: |
+  The Microchip 48l640 is a 8KByte EERAM connected via SPI.
+
+  datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20006055B.pdf
+
+properties:
+  compatible:
+    items:
+      - const: microchip,48l640
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeram@0 {
+            compatible = "microchip,48l640";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
new file mode 100644
index 0000000000..18f6733408
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Flash chips (Memory Technology Devices) are often used for solid state
+  file systems on embedded devices.
+
+allOf:
+  - $ref: mtd.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amd,s29gl01gp
+              - amd,s29gl032a
+              - amd,s29gl256n
+              - amd,s29gl512n
+              - arm,versatile-flash
+              - arm,vexpress-flash
+              - cortina,gemini-flash
+              - cypress,hyperflash
+              - ge,imp3a-firmware-mirror
+              - ge,imp3a-paged-flash
+              - gef,ppc9a-firmware-mirror
+              - gef,ppc9a-paged-flash
+              - gef,sbc310-firmware-mirror
+              - gef,sbc310-paged-flash
+              - gef,sbc610-firmware-mirror
+              - gef,sbc610-paged-flash
+              - intel,28f128j3
+              - intel,dt28f160
+              - intel,ixp4xx-flash
+              - intel,JS28F128
+              - intel,JS28F640
+              - intel,PC28F640P30T85
+              - numonyx,js28f00a
+              - numonyx,js28f128
+              - sst,sst39vf320
+              - xlnx,xps-mch-emc-2.00.a
+          - enum:
+              - cfi-flash
+              - jedec-flash
+      - items:
+          - enum:
+              - cypress,cy7c1019dv33-10zsxi
+              - arm,vexpress-psram
+          - const: mtd-ram
+      - enum:
+          - cfi-flash
+          - jedec-flash
+          - mtd-ram
+          - mtd-rom
+
+  reg:
+    description: |
+      It's possible to (optionally) define multiple "reg" tuples so that
+      non-identical chips can be described in one node.
+    minItems: 1
+    maxItems: 8
+
+  bank-width:
+    description: Width (in bytes) of the bank.  Equal to the device width times
+      the number of interleaved chips.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  device-width:
+    description:
+      Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2 ]
+
+  no-unaligned-direct-access:
+    type: boolean
+    description: |
+      Disables the default direct mapping of the flash.
+
+      On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause problems
+      with JFFS2 usage, as the local bus (LPB) doesn't support unaligned
+      accesses as implemented in the JFFS2 code via memcpy(). By defining
+      "no-unaligned-direct-access", the flash will not be exposed directly to
+      the MTD users (e.g. JFFS2) any more.
+
+  linux,mtd-name:
+    description:
+      Allows specifying the mtd name for retro capability with physmap-flash
+      drivers as boot loader pass the mtd partition via the old device name
+      physmap-flash.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  use-advanced-sector-protection:
+    type: boolean
+    description: |
+      Enables support for the advanced sector protection (Spansion: PPB -
+      Persistent Protection Bits) locking.
+
+  erase-size:
+    description: The chip's physical erase block size in bytes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  addr-gpios:
+    description:
+      List of GPIO descriptors that will be used to address the MSBs address
+      lines. The order goes from LSB to MSB.
+    minItems: 1
+    maxItems: 8
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  big-endian: true
+  little-endian: true
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: cortina,gemini-flash
+then:
+  properties:
+    syscon:
+      $ref: /schemas/types.yaml#/definitions/phandle
+      description:
+        Phandle to the syscon controller
+  required:
+    - syscon
+
+# FIXME: A parent bus may define timing properties
+additionalProperties: true
+
+examples:
+  - |
+
+    flash@ff000000 {
+        compatible = "cfi-flash";
+        reg = <0xff000000 0x01000000>;
+        bank-width = <4>;
+        device-width = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xff000000 0x01000000>;
+
+        fs@0 {
+            label = "fs";
+            reg = <0 0xf80000>;
+        };
+        firmware@f80000 {
+            label = "firmware";
+            reg = <0xf80000 0x80000>;
+            read-only;
+        };
+    };
+
+  - |
+    /* An example with multiple "reg" tuples */
+
+    flash@0 {
+        compatible = "intel,PC28F640P30T85", "cfi-flash";
+        reg = <0x00000000 0x02000000>,
+              <0x02000000 0x02000000>;
+        bank-width = <2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x04000000>;
+
+        partition@0 {
+            label = "test-part1";
+            reg = <0 0x04000000>;
+        };
+    };
+
+  - |
+    /* An example using SRAM */
+    bus {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        sram@2,0 {
+            compatible = "mtd-ram";
+            reg = <2 0 0x00200000>;
+            bank-width = <2>;
+        };
+    };
+
+  - |
+    /* An example using addr-gpios */
+    #include <dt-bindings/gpio/gpio.h>
+
+    flash@20000000 {
+        compatible = "cfi-flash";
+        reg = <0x20000000 0x02000000>;
+        bank-width = <2>;
+        addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00000000 0x02000000>,
+                 <1 0x02000000 0x02000000>;
+
+        partition@0 {
+            label = "test-part1";
+            reg = <0 0x04000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
new file mode 100644
index 0000000000..b82ca03e96
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTD (Memory Technology Device)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Richard Weinberger <richard@nod.at>
+
+properties:
+  $nodename:
+    pattern: "^(flash|.*sram|nand)(@.*)?$"
+
+  label:
+    description:
+      User-defined MTD device name. Can be used to assign user friendly
+      names to MTD devices (instead of the flash model or flash controller
+      based name) in order to ease flash device identification and/or
+      describe what they are used for.
+
+  '#address-cells':
+    deprecated: true
+
+  '#size-cells':
+    deprecated: true
+
+  partitions:
+    $ref: /schemas/mtd/partitions/partitions.yaml
+
+    required:
+      - compatible
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: partitions/partition.yaml
+    deprecated: true
+
+  "^partition@[0-9a-f]+":
+    $ref: partitions/partition.yaml
+    deprecated: true
+
+  "^otp(-[0-9]+)?$":
+    $ref: ../nvmem/nvmem.yaml#
+    unevaluatedProperties: false
+
+    description: |
+      An OTP memory region. Some flashes provide a one-time-programmable
+      memory whose content can either be programmed by a user or is already
+      pre-programmed by the factory. Some flashes might provide both.
+
+    properties:
+      compatible:
+        enum:
+          - user-otp
+          - factory-otp
+
+    required:
+      - compatible
+
+# This is a generic file other binding inherit from
+additionalProperties: true
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            reg = <0>;
+            compatible = "jedec,spi-nor";
+            label = "System-firmware";
+        };
+    };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            reg = <0>;
+            compatible = "jedec,spi-nor";
+
+            otp-1 {
+                compatible = "factory-otp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                electronic-serial-number@0 {
+                    reg = <0 8>;
+                };
+            };
+
+            otp-2 {
+                compatible = "user-otp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                mac-address@0 {
+                    reg = <0 6>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
new file mode 100644
index 0000000000..cf4198e43d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale's mxc_nand
+
+maintainers:
+  - Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    const: fsl,imx27-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@d8000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx27-nand";
+        reg = <0xd8000000 0x1000>;
+        interrupts = <29>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
new file mode 100644
index 0000000000..46c55295a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
@@ -0,0 +1,36 @@
+Macronix Raw NAND Controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible: should be "mxic,multi-itfc-v009-nand-controller"
+- reg: should contain 1 entry for the registers
+- #address-cells: should be set to 1
+- #size-cells: should be set to 0
+- interrupts: interrupt line connected to this raw NAND controller
+- clock-names: should contain "ps", "send" and "send_dly"
+- clocks: should contain 3 phandles for the "ps", "send" and
+	 "send_dly" clocks
+
+Children nodes:
+- children nodes represent the available NAND chips.
+
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml
+for more details on generic bindings.
+
+Example:
+
+	nand: nand-controller@43c30000 {
+		compatible = "mxic,multi-itfc-v009-nand-controller";
+		reg = <0x43c30000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 0x1d IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+		clock-names = "send", "send_dly", "ps";
+
+		nand@0 {
+			reg = <0>;
+			nand-ecc-mode = "soft";
+			nand-ecc-algo = "bch";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
new file mode 100644
index 0000000000..f92e7234de
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mxicy,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix NAND ECC engine
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: mxicy,nand-ecc-engine-rev3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    /* External configuration */
+    spi_controller0: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&ecc_engine0>;
+        };
+    };
+
+    ecc_engine0: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
+
+  - |
+    /* Pipelined configuration */
+    spi_controller1: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand-ecc-engine = <&ecc_engine1>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&spi_controller1>;
+        };
+    };
+
+    ecc_engine1: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/nand-chip.yaml b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
new file mode 100644
index 0000000000..609d4a4ddd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip Common Properties
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: mtd.yaml#
+
+description: |
+  This file covers the generic description of a NAND chip. It implies that the
+  bus interface should not be taken into account: both raw NAND devices and
+  SPI-NAND devices are concerned by this description.
+
+properties:
+  reg:
+    description:
+      Contains the chip-select IDs.
+
+  nand-ecc-engine:
+    description: |
+      A phandle on the hardware ECC engine if any. There are
+      basically three possibilities:
+      1/ The ECC engine is part of the NAND controller, in this
+      case the phandle should reference the parent node.
+      2/ The ECC engine is part of the NAND part (on-die), in this
+      case the phandle should reference the node itself.
+      3/ The ECC engine is external, in this case the phandle should
+      reference the specific ECC engine node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-use-soft-ecc-engine:
+    description: Use a software ECC engine.
+    type: boolean
+
+  nand-no-ecc-engine:
+    description: Do not use any ECC correction.
+    type: boolean
+
+  nand-ecc-algo:
+    description:
+      Desired ECC algorithm.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hamming, bch, rs]
+
+  nand-ecc-strength:
+    description:
+      Maximum number of bits that can be corrected per ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  nand-ecc-step-size:
+    description:
+      Number of data bytes covered by a single ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  secure-regions:
+    description:
+      Regions in the NAND chip which are protected using a secure element
+      like Trustzone. This property contains the start address and size of
+      the secure regions present.
+    $ref: /schemas/types.yaml#/definitions/uint64-matrix
+
+required:
+  - reg
+
+# This file can be referenced by more specific devices (like spi-nands)
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
new file mode 100644
index 0000000000..28167c0cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Controller Common Properties
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Richard Weinberger <richard@nod.at>
+
+description: |
+  The NAND controller should be represented with its own DT node, and
+  all NAND chips attached to this controller should be defined as
+  children nodes of the NAND controller. This representation should be
+  enforced even for simple controllers supporting only one chip.
+
+properties:
+  $nodename:
+    pattern: "^nand-controller(@.*)?"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  ranges: true
+
+  cs-gpios:
+    description:
+      Array of chip-select available to the controller. The first
+      entries are a 1:1 mapping of the available chip-select on the
+      NAND controller (even if they are not used). As many additional
+      chip-select as needed may follow and should be phandles of GPIO
+      lines. 'reg' entries of the NAND chip subnodes become indexes of
+      this array when this property is present.
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml#
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
+
+examples:
+  - |
+    nand-controller {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      cs-gpios = <0>, <&gpioA 1>; /* A single native CS is available */
+
+      /* controller specific properties */
+
+      nand@0 {
+        reg = <0>; /* Native CS */
+        /* NAND chip specific properties */
+      };
+
+      nand@1 {
+        reg = <1>; /* GPIO CS */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/nand-macronix.txt b/Documentation/devicetree/bindings/mtd/nand-macronix.txt
new file mode 100644
index 0000000000..ffab28a2c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-macronix.txt
@@ -0,0 +1,27 @@
+Macronix NANDs Device Tree Bindings
+-----------------------------------
+
+Macronix NANDs support randomizer operation for scrambling user data,
+which can be enabled with a SET_FEATURE. The penalty when using the
+randomizer are subpage accesses prohibited and more time period needed
+for program operation, i.e., tPROG 300us to 340us (randomizer enabled).
+Enabling the randomizer is a one time persistent and non reversible
+operation.
+
+For more high-reliability concern, if subpage write is not available
+with hardware ECC and not enabled at UBI level, then enabling the
+randomizer is recommended by default by adding a new specific property
+in children nodes.
+
+Required NAND chip properties in children mode:
+- randomizer enable: should be "mxic,enable-randomizer-otp"
+
+Example:
+
+	nand: nand-controller@unit-address {
+
+		nand@0 {
+			reg = <0>;
+			mxic,enable-randomizer-otp;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
new file mode 100644
index 0000000000..e737e5beb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
@@ -0,0 +1,64 @@
+NVIDIA Tegra NAND Flash controller
+
+Required properties:
+- compatible: Must be one of:
+  - "nvidia,tegra20-nand"
+- reg: MMIO address range
+- interrupts: interrupt output of the NFC controller
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - nand
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - nand
+
+Optional children nodes:
+Individual NAND chips are children of the NAND controller node. Currently
+only one NAND chip supported.
+
+Required children node properties:
+- reg: An integer ranging from 1 to 6 representing the CS line to use.
+
+Optional children node properties:
+- nand-ecc-mode: String, operation mode of the NAND ecc mode. Currently only
+		 "hw" is supported.
+- nand-ecc-algo: string, algorithm of NAND ECC.
+		 Supported values with "hw" ECC mode are: "rs", "bch".
+- nand-bus-width : See nand-controller.yaml
+- nand-on-flash-bbt: See nand-controller.yaml
+- nand-ecc-strength: integer representing the number of bits to correct
+		     per ECC step (always 512). Supported strength using HW ECC
+		     modes are:
+		     - RS: 4, 6, 8
+		     - BCH: 4, 8, 14, 16
+- nand-ecc-maximize: See nand-controller.yaml
+- nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM
+		       are chosen.
+- wp-gpios: GPIO specifier for the write protect pin.
+
+Optional child node of NAND chip nodes:
+Partitions: see partition.txt
+
+  Example:
+	nand-controller@70008000 {
+		compatible = "nvidia,tegra20-nand";
+		reg = <0x70008000 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		clock-names = "nand";
+		resets = <&tegra_car 13>;
+		reset-names = "nand";
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nand-bus-width = <8>;
+			nand-on-flash-bbt;
+			nand-ecc-algo = "bch";
+			nand-ecc-strength = <8>;
+			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/nxp-spifi.txt b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
new file mode 100644
index 0000000000..f8b6b25065
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-spifi.txt
@@ -0,0 +1,58 @@
+* NXP SPI Flash Interface (SPIFI)
+
+NXP SPIFI is a specialized SPI interface for serial Flash devices.
+It supports one Flash device with 1-, 2- and 4-bits width in SPI
+mode 0 or 3. The controller operates in either command or memory
+mode. In memory mode the Flash is accessible from the CPU as
+normal memory.
+
+Required properties:
+  - compatible : Should be "nxp,lpc1773-spifi"
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - reg-names: Should contain the reg names "spifi" and "flash"
+  - interrupts : Should contain the interrupt for the device
+  - clocks : The clocks needed by the SPIFI controller
+  - clock-names : Should contain the clock names "spifi" and "reg"
+
+Optional properties:
+ - resets : phandle + reset specifier
+
+The SPI Flash must be a child of the SPIFI node and must have a
+compatible property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally it can also contain the following properties.
+ - spi-cpol : Controller only supports mode 0 and 3 so either
+              both spi-cpol and spi-cpha should be present or
+              none of them
+ - spi-cpha : See above
+ - spi-rx-bus-width : Used to select how many pins that are used
+                      for input on the controller
+
+See bindings/spi/spi-bus.txt for more information.
+
+Example:
+spifi: spifi@40003000 {
+	compatible = "nxp,lpc1773-spifi";
+	reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+	reg-names = "spifi", "flash";
+	interrupts = <30>;
+	clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+	clock-names = "spifi", "reg";
+	resets = <&rgu 53>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt
new file mode 100644
index 0000000000..2d6ab660e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt
@@ -0,0 +1,50 @@
+NAND support for Marvell Orion SoC platforms
+
+Required properties:
+- compatible : "marvell,orion-nand".
+- reg : Base physical address of the NAND and length of memory mapped
+	region
+
+Optional properties:
+- cle : Address line number connected to CLE. Default is 0
+- ale : Address line number connected to ALE. Default is 1
+- bank-width : Width in bytes of the device. Default is 1
+- chip-delay : Chip dependent delay for transferring data from array to read
+               registers in usecs
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+nand@f4000000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cle = <0>;
+	ale = <1>;
+	bank-width = <1>;
+	chip-delay = <25>;
+	compatible = "marvell,orion-nand";
+	reg = <0xf4000000 0x400>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "dtb";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "root";
+		reg = <0x0400000 0x7d00000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
new file mode 100644
index 0000000000..97618847ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/arm,arm-firmware-suite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Firmware Suite (AFS) Partitions
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+select: false
+
+description: |
+  The ARM Firmware Suite is a flash partitioning system found on the
+  ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
+  Versatile PB, the RealView family, Versatile Express and Juno.
+
+properties:
+  compatible:
+    const: arm,arm-firmware-suite
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "arm,arm-firmware-suite";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
new file mode 100644
index 0000000000..94f0742b37
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm4908-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 partitioning
+
+description: |
+  Broadcom BCM4908 CFE bootloader supports two firmware partitions. One is used
+  for regular booting, the other is treated as fallback.
+
+  This binding allows defining all fixed partitions and marking those containing
+  firmware. System can use that information e.g. for booting or flashing
+  purposes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+select: false
+
+properties:
+  compatible:
+    const: brcm,bcm4908-partitions
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+patternProperties:
+  "^partition@[0-9a-f]+$":
+    $ref: partition.yaml#
+    properties:
+      compatible:
+        const: brcm,bcm4908-firmware
+    unevaluatedProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "brcm,bcm4908-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "cferom";
+            reg = <0x0 0x100000>;
+        };
+
+        partition@100000 {
+            compatible = "brcm,bcm4908-firmware";
+            reg = <0x100000 0xf00000>;
+        };
+
+        partition@1000000 {
+            compatible = "brcm,bcm4908-firmware";
+            reg = <0x1000000 0xf00000>;
+        };
+
+        partition@1f00000 {
+            label = "calibration";
+            reg = <0x1f00000 0x100000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
new file mode 100644
index 0000000000..939e7b50db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM47xx Partitions
+
+description: |
+  Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
+  home routers. Their BCM947xx boards using CFE bootloader have several
+  partitions without any on-flash partition table. On some devices their sizes
+  and/or meanings can also vary so fixed partitioning can't be used.
+
+  Discovering partitions on these devices is possible thanks to having a special
+  header and/or magic signature at the beginning of each of them. They are also
+  block aligned which is important for determinig a size.
+
+  Most of partitions use ASCII text based magic for determining a type. More
+  complex partitions (like TRX with its HDR0 magic) may include extra header
+  containing some details, including a length.
+
+  A list of supported partitions includes:
+  1) Bootloader with Broadcom's CFE (Common Firmware Environment)
+  2) NVRAM with configuration/calibration data
+  3) Device manufacturer's data with some default values (e.g. SSIDs)
+  4) TRX firmware container which can hold up to 4 subpartitions
+  5) Backup TRX firmware used after failed upgrade
+
+  As mentioned earlier, role of some partitions may depend on extra
+  configuration. For example both: main firmware and backup firmware use the
+  same TRX format with the same header. To distinguish currently used firmware a
+  CFE's environment variable "bootpartition" is used.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+select: false
+
+properties:
+  compatible:
+    const: brcm,bcm947xx-cfe-partitions
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "brcm,bcm947xx-cfe-partitions";
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt
new file mode 100644
index 0000000000..9f630e95f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt
@@ -0,0 +1,24 @@
+Broadcom BCM963XX CFE Loader NOR Flash Partitions
+=================================================
+
+Most Broadcom BCM63XX SoC based devices follow the Broadcom reference layout for
+NOR. The first erase block used for the CFE bootloader, the last for an
+NVRAM partition, and the remainder in-between for one to two firmware partitions
+at fixed offsets. A valid firmware partition is identified by the ImageTag
+header found at beginning of the second erase block, containing the rootfs and
+kernel offsets and sizes within the firmware partition.
+
+Required properties:
+- compatible : must be "brcm,bcm963xx-cfe-nor-partitions"
+
+Example:
+
+flash@1fc00000 {
+	compatible = "cfi-flash";
+	reg = <0x1fc00000 0x400000>;
+	bank-width = <2>;
+
+	partitions {
+		compatible = "brcm,bcm963xx-cfe-nor-partitions";
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt
new file mode 100644
index 0000000000..f8b7418ed8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt
@@ -0,0 +1,45 @@
+Broadcom BCM963XX ImageTag Partition Container
+==============================================
+
+Some Broadcom BCM63XX SoC based devices contain additional, non discoverable
+partitions or non standard bootloader partition sizes. For these a mixed layout
+needs to be used with an explicit firmware partition.
+
+The BCM963XX ImageTag is a simple firmware header describing the offsets and
+sizes of the rootfs and kernel parts contained in the firmware.
+
+Required properties:
+- compatible : must be "brcm,bcm963xx-imagetag"
+
+Example:
+
+flash@1e000000 {
+	compatible = "cfi-flash";
+	reg = <0x1e000000 0x2000000>;
+	bank-width = <2>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			reg = <0x0 0x10000>;
+			read-only;
+		};
+
+		firmware@10000 {
+			reg = <0x10000 0x7d0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		caldata@7e0000 {
+			reg = <0x7e0000 0x10000>;
+			read-only;
+		};
+
+		nvram@7f0000 {
+			reg = <0x7f0000 0x10000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
new file mode 100644
index 0000000000..c2175d3c82
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
@@ -0,0 +1,42 @@
+Broadcom TRX Container Partition
+================================
+
+TRX is Broadcom's official firmware format for the BCM947xx boards. It's used by
+most of the vendors building devices based on Broadcom's BCM47xx SoCs and is
+supported by the CFE bootloader.
+
+Design of the TRX format is very minimalistic. Its header contains
+identification fields, CRC32 checksum and the locations of embedded partitions.
+Its purpose is to store a few partitions in a format that can be distributed as
+a standalone file and written in a flash memory.
+
+Container can hold up to 4 partitions. The first partition has to contain a
+device executable binary (e.g. a kernel) as it's what the CFE bootloader starts
+executing. Other partitions can be used for operating system purposes. This is
+useful for systems that keep kernel and rootfs separated.
+
+TRX doesn't enforce any strict partition boundaries or size limits. All
+partitions have to be less than the 4GiB max size limit.
+
+There are two existing/known TRX variants:
+1) v1 which contains 3 partitions
+2) v2 which contains 4 partitions
+
+There aren't separated compatible bindings for them as version can be trivialy
+detected by a software parsing TRX header.
+
+Required properties:
+- compatible : (required) must be "brcm,trx"
+
+Optional properties:
+
+- brcm,trx-magic: TRX magic, if it is different from the default magic
+		  0x30524448 as a u32.
+
+Example:
+
+flash@0 {
+	partitions {
+		compatible = "brcm,trx";
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
new file mode 100644
index 0000000000..331e564f29
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed partitions
+
+description: |
+  This binding can be used on platforms which have strong conventions about
+  which portions of a flash are used for what purposes, but which don't use an
+  on-flash partition table such as RedBoot.
+
+  The partition table should be a node named "partitions". Partitions are then
+  defined as subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fixed-partitions
+      - items:
+          - const: sercomm,sc-partitions
+          - const: fixed-partitions
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: partition.yaml#
+
+    properties:
+      sercomm,scpart-id:
+        description: Partition id in Sercomm partition map. Mtd parser
+          uses this id to find a record in the partition map containing
+          offset and size of the current partition. The values from
+          partition map overrides partition offset and size defined in
+          reg property of the dts. Frequently these values are the same,
+          but may differ if device has bad eraseblocks on a flash.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0000000 0x100000>;
+            read-only;
+        };
+
+        uimage@100000 {
+            reg = <0x0100000 0x200000>;
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <2>;
+
+        /* a 4 GiB partition */
+        partition@0 {
+            label = "filesystem";
+            reg = <0x00000000 0x1 0x00000000>;
+            linux,rootfs;
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        /* an 8 GiB partition */
+        partition@0 {
+            label = "filesystem #1";
+            reg = <0x0 0x00000000 0x2 0x00000000>;
+        };
+
+        /* a 4 GiB partition */
+        partition@200000000 {
+            label = "filesystem #2";
+            reg = <0x2 0x00000000 0x1 0x00000000>;
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "bootloader";
+            reg = <0x000000 0x100000>;
+            read-only;
+        };
+
+        firmware@100000 {
+            compatible = "brcm,trx";
+            label = "firmware";
+            reg = <0x100000 0xe00000>;
+        };
+
+        calibration@f00000 {
+            compatible = "fixed-partitions";
+            label = "calibration";
+            reg = <0xf00000 0x100000>;
+            ranges = <0 0xf00000 0x100000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            partition@0 {
+                label = "wifi0";
+                reg = <0x000000 0x080000>;
+            };
+
+            partition@80000 {
+                label = "wifi1";
+                reg = <0x080000 0x080000>;
+            };
+        };
+    };
+
+  - |
+    partitions {
+        compatible = "sercomm,sc-partitions", "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0 0x100000>;
+            sercomm,scpart-id = <0>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "dynamic partition map";
+            reg = <0x100000 0x100000>;
+            sercomm,scpart-id = <1>;
+        };
+
+        partition@200000 {
+            label = "Factory";
+            reg = <0x200000 0x100000>;
+            sercomm,scpart-id = <2>;
+            read-only;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
new file mode 100644
index 0000000000..c5fa78ff71
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linksys,ns-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linksys Northstar partitioning
+
+description: |
+  Linksys devices based on Broadcom Northstar architecture often use two
+  firmware partitions. One is used for regular booting, the other is treated as
+  fallback.
+
+  This binding allows defining all fixed partitions and marking those containing
+  firmware. System can use that information e.g. for booting or flashing
+  purposes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+select: false
+
+properties:
+  compatible:
+    const: linksys,ns-partitions
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+patternProperties:
+  "^partition@[0-9a-f]+$":
+    $ref: partition.yaml#
+    properties:
+      compatible:
+        items:
+          - const: linksys,ns-firmware
+          - const: brcm,trx
+    unevaluatedProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "linksys,ns-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "boot";
+            reg = <0x0 0x100000>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "nvram";
+            reg = <0x100000 0x100000>;
+        };
+
+        partition@200000 {
+            compatible = "linksys,ns-firmware", "brcm,trx";
+            reg = <0x200000 0xf00000>;
+        };
+
+        partition@1100000 {
+            compatible = "linksys,ns-firmware", "brcm,trx";
+            reg = <0x1100000 0xf00000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
new file mode 100644
index 0000000000..5474d63268
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nvmem cells
+
+description: |
+  Any partition containing the compatible "nvmem-cells" will register as a
+  nvmem provider.
+  Each direct subnodes represents a nvmem cell following the nvmem binding.
+  Nvmem binding to declare nvmem-cells can be found in:
+  Documentation/devicetree/bindings/nvmem/nvmem.yaml
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+allOf:
+  - $ref: /schemas/mtd/partitions/partition.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    const: nvmem-cells
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+      compatible = "fixed-partitions";
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      /* ... */
+
+      };
+      art: art@1200000 {
+        compatible = "nvmem-cells";
+        reg = <0x1200000 0x0140000>;
+        label = "art";
+        read-only;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        macaddr_gmac1: macaddr_gmac1@0 {
+          reg = <0x0 0x6>;
+        };
+
+        macaddr_gmac2: macaddr_gmac2@6 {
+          reg = <0x6 0x6>;
+        };
+
+        pre_cal_24g: pre_cal_24g@1000 {
+          reg = <0x1000 0x2f20>;
+        };
+
+        pre_cal_5g: pre_cal_5g@5000{
+          reg = <0x5000 0x2f20>;
+        };
+      };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "bootloader";
+            reg = <0x000000 0x100000>;
+            read-only;
+        };
+
+        firmware@100000 {
+            compatible = "brcm,trx";
+            label = "firmware";
+            reg = <0x100000 0xe00000>;
+        };
+
+        calibration@f00000 {
+            compatible = "nvmem-cells";
+            label = "calibration";
+            reg = <0xf00000 0x100000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            wifi0@0 {
+                reg = <0x000000 0x080000>;
+            };
+
+            wifi1@80000 {
+                reg = <0x080000 0x080000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
new file mode 100644
index 0000000000..1ebe9e2347
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+  This binding describes a single flash partition. Each partition must have its
+  relative offset and size specified. Depending on partition function extra
+  properties can be used.
+
+  A partition may be dynamically allocated by a specific parser at runtime.
+  In this specific case, a specific suffix is required to the node name.
+  Everything after 'partition-' will be used as the partition name to compare
+  with the one dynamically allocated by the specific parser.
+  If the partition contains invalid char a label can be provided that will
+  be used instead of the node name to make the comparison.
+  This is used to assign an OF node to the dynamiccally allocated partition
+  so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
+  The OF node will be assigned only if the partition label declared match the
+  one assigned by the parser at runtime.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  reg:
+    description: partition's offset and size within the flash
+    maxItems: 1
+
+  label:
+    description: The label / name for this partition. If omitted, the label
+      is taken from the node name (excluding the unit address).
+
+  read-only:
+    description: This parameter, if present, is a hint that this partition
+      should only be mounted read-only. This is usually used for flash
+      partitions containing early-boot firmware images or data which should
+      not be clobbered.
+    type: boolean
+
+  lock:
+    description: Do not unlock the partition at initialization time (not
+      supported on all devices)
+    type: boolean
+
+  slc-mode:
+    description: This parameter, if present, allows one to emulate SLC mode
+      on a partition attached to an MLC NAND thus making this partition
+      immune to paired-pages corruptions
+    type: boolean
+
+  linux,rootfs:
+    description: Marks partition that contains root filesystem to mount and boot
+      user space from
+    type: boolean
+
+if:
+  not:
+    required: [ reg ]
+then:
+  properties:
+    $nodename:
+      pattern: '^partition-.*$'
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
new file mode 100644
index 0000000000..1dda2c8074
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partitions
+
+description: |
+  This binding is generic and describes the content of the partitions container
+  node. All partition parsers must be referenced here.
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+oneOf:
+  - $ref: arm,arm-firmware-suite.yaml
+  - $ref: brcm,bcm4908-partitions.yaml
+  - $ref: brcm,bcm947xx-cfe-partitions.yaml
+  - $ref: fixed-partitions.yaml
+  - $ref: linksys,ns-partitions.yaml
+  - $ref: qcom,smem-part.yaml
+  - $ref: redboot-fis.yaml
+  - $ref: tplink,safeloader-partitions.yaml
+
+properties:
+  compatible: true
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+patternProperties:
+  "^partition(-.+|@[0-9a-f]+)$":
+    $ref: partition.yaml
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
new file mode 100644
index 0000000000..1c2b4e780c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMEM NAND flash partition parser
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  The Qualcomm SoCs supporting the NAND controller interface features a Shared
+  Memory (SMEM) based partition table scheme. The maximum partitions supported
+  varies between partition table revisions. V3 supports maximum 16 partitions
+  and V4 supports 48 partitions.
+
+select: false
+
+properties:
+  compatible:
+    const: qcom,smem-part
+
+patternProperties:
+  "^partition-[0-9a-z]+$":
+    $ref: nvmem-cells.yaml
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    flash {
+        partitions {
+            compatible = "qcom,smem-part";
+        };
+    };
+
+  - |
+    /* Example declaring dynamic partition */
+    flash {
+        partitions {
+            compatible = "qcom,smem-part";
+
+            partition-art {
+                compatible = "nvmem-cells";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                label = "0:art";
+
+                macaddr_art_0: macaddr@0 {
+                    reg = <0x0 0x6>;
+                };
+
+                macaddr_art_6: macaddr@6 {
+                    reg = <0x6 0x6>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
new file mode 100644
index 0000000000..ba7445cd69
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/redboot-fis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RedBoot FLASH Image System (FIS) Partitions
+
+description: The FLASH Image System (FIS) directory is a flash description
+    format closely associated with the RedBoot boot loader.
+    It uses one single flash eraseblock in the flash to store an index of
+    all images in the flash.
+    This block size will vary depending on flash but is typically
+    32 KB in size.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+select: false
+
+properties:
+  compatible:
+    const: redboot-fis
+
+  fis-index-block:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: a index to the eraseblock containing the FIS directory on this
+      device. On a flash memory with 32KB eraseblocks, 0 means the first
+      eraseblock at 0x00000000, 1 means the second eraseblock at 0x00008000 and so on.
+
+  '#address-cells': false
+
+  '#size-cells': false
+
+required:
+  - compatible
+  - fis-index-block
+
+additionalProperties: false
+
+examples:
+  - |
+    flash {
+      partitions {
+        compatible = "redboot-fis";
+        fis-index-block = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
new file mode 100644
index 0000000000..4c1cbf43e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/seama.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seattle Image Partitions
+
+description: The SEAttle iMAge (SEAMA) partition is a type of partition
+  used for NAND flash devices. This type of flash image is found in some
+  D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L,
+  DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79
+  (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This partition type
+  does not have children defined in the device tree, they need to be
+  detected by software.
+
+allOf:
+  - $ref: partition.yaml#
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: seama
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "seama";
+            reg = <0x0 0x800000>;
+            label = "firmware";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml
new file mode 100644
index 0000000000..a24bbaac3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/tplink,safeloader-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TP-Link SafeLoader partitions
+
+description: |
+  TP-Link home routers store various data on flash (e.g. bootloader,
+  flash layout, firmware, product info, configuration, calibration
+  data). That requires flash partitioning.
+
+  Flash space layout of TP-Link devices is stored on flash itself using
+  a custom ASCII-based format. That format was first found in TP-Link
+  devices with a custom SafeLoader bootloader. Later it was adapted to
+  CFE and U-Boot bootloaders.
+
+  Partitions specified in partitions table cover whole flash space. Some
+  contain static data that shouldn't get modified (device's MAC or WiFi
+  calibration data). Others are semi-static (like kernel). Finally some
+  partitions contain fully changeable content (like rootfs).
+
+  This binding describes partitioning method and defines offset of ASCII
+  based partitions table. That offset is picked at manufacturing process
+  and doesn't change.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: tplink,safeloader-partitions
+
+  partitions-table-offset:
+    description: Flash offset of partitions table
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#
+
+required:
+  - partitions-table-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "tplink,safeloader-partitions";
+        partitions-table-offset = <0x100000>;
+
+        partition-file-system {
+                linux,rootfs;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
new file mode 100644
index 0000000000..3c56efe48e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/u-boot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot bootloader partition
+
+description: |
+  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  located on some kind of flash device.
+
+  Device configuration is stored as a set of environment variables that are
+  located in a (usually standalone) block of data.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,u-boot
+        description: |
+          Broadcom stores environment variables inside a U-Boot partition. They
+          can be identified by a custom header with magic value.
+
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "brcm,u-boot";
+            reg = <0x0 0x100000>;
+            label = "u-boot";
+
+            partition-u-boot-env {
+            };
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "firmware";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
new file mode 100644
index 0000000000..4ada60fbf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NAND controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-nand
+      - qcom,ipq4019-nand
+      - qcom,ipq6018-nand
+      - qcom,ipq8074-nand
+      - qcom,sdx55-nand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core Clock
+      - description: Always ON Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: aon
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+
+      nand-bus-width:
+        const: 8
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+      nand-ecc-step-size:
+        enum:
+          - 512
+
+      qcom,boot-partitions:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: offset
+            - description: size
+        description:
+          Boot partition use a different layout where the 4 bytes of spare
+          data are not protected by ECC. Use this to declare these special
+          partitions by defining first the offset and then the size.
+
+          It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+          and should be declared in ascending order.
+
+          Refer to the ipq8064 example on how to use this special binding.
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq806x-nand
+    then:
+      properties:
+        dmas:
+          items:
+            - description: rxtx DMA channel
+
+        dma-names:
+          items:
+            - const: rxtx
+
+        qcom,cmd-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM command type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+        qcom,data-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM data type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq806x-nand
+
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            qcom,boot-partitions: true
+    else:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            qcom,boot-partitions: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    nand-controller@1ac00000 {
+        compatible = "qcom,ipq806x-nand";
+        reg = <0x1ac00000 0x800>;
+
+        clocks = <&gcc EBI2_CLK>,
+                 <&gcc EBI2_AON_CLK>;
+        clock-names = "core", "aon";
+
+        dmas = <&adm_dma 3>;
+        dma-names = "rxtx";
+        qcom,cmd-crci = <15>;
+        qcom,data-crci = <3>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+
+            nand-ecc-strength = <4>;
+            nand-bus-width = <8>;
+
+            qcom,boot-partitions = <0x0 0x58a0000>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "boot-nand";
+                    reg = <0 0x58a0000>;
+                };
+
+                partition@58a0000 {
+                    label = "fs-nand";
+                    reg = <0x58a0000 0x4000000>;
+                };
+            };
+        };
+    };
+
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+    nand-controller@79b0000 {
+        compatible = "qcom,ipq4019-nand";
+        reg = <0x79b0000 0x1000>;
+
+        clocks = <&gcc GCC_QPIC_CLK>,
+                 <&gcc GCC_QPIC_AHB_CLK>;
+        clock-names = "core", "aon";
+
+        dmas = <&qpicbam 0>,
+               <&qpicbam 1>,
+               <&qpicbam 2>;
+        dma-names = "tx", "rx", "cmd";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-ecc-strength = <4>;
+            nand-bus-width = <8>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "boot-nand";
+                    reg = <0 0x58a0000>;
+                };
+
+                partition@58a0000 {
+                    label = "fs-nand";
+                    reg = <0x58a0000 0x4000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
new file mode 100644
index 0000000000..092448d7bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/raw-nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raw NAND Chip Common Properties
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: nand-chip.yaml#
+
+description: |
+  The ECC strength and ECC step size properties define the user
+  desires in terms of correction capability of a controller. Together,
+  they request the ECC engine to correct {strength} bit errors per
+  {size} bytes for a particular raw NAND chip.
+
+  The interpretation of these parameters is implementation-defined, so
+  not all implementations must support all possible
+  combinations. However, implementations are encouraged to further
+  specify the value(s) they support.
+
+properties:
+  $nodename:
+    pattern: "^nand@[a-f0-9]$"
+
+  reg:
+    description:
+      Contains the chip-select IDs.
+
+  nand-ecc-placement:
+    description:
+      Location of the ECC bytes. This location is unknown by default
+      but can be explicitly set to "oob", if all ECC bytes are
+      known to be stored in the OOB area, or "interleaved" if ECC
+      bytes will be interleaved with regular data in the main area.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ oob, interleaved ]
+    deprecated: true
+
+  nand-ecc-mode:
+    description:
+      Legacy ECC configuration mixing the ECC engine choice and
+      configuration.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [none, soft, soft_bch, hw, hw_syndrome, on-die]
+    deprecated: true
+
+  nand-bus-width:
+    description:
+      Bus width to the NAND chip
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+
+  nand-on-flash-bbt:
+    description:
+      With this property, the OS will search the device for a Bad
+      Block Table (BBT). If not found, it will create one, reserve
+      a few blocks at the end of the device to store it and update
+      it as the device ages. Otherwise, the out-of-band area of a
+      few pages of all the blocks will be scanned at boot time to
+      find Bad Block Markers (BBM). These markers will help to
+      build a volatile BBT in RAM.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nand-ecc-maximize:
+    description:
+      Whether or not the ECC strength should be maximized. The
+      maximum ECC strength is both controller and chip
+      dependent. The ECC engine has to select the ECC config
+      providing the best strength and taking the OOB area size
+      constraint into account. This is particularly useful when
+      only the in-band area is used by the upper layers, and you
+      want to make your NAND as reliable as possible.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nand-is-boot-medium:
+    description:
+      Whether or not the NAND chip is a boot medium. Drivers might
+      use this information to select ECC algorithms supported by
+      the boot ROM or similar restrictions.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nand-rb:
+    description:
+      Contains the native Ready/Busy IDs.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  rb-gpios:
+    description:
+      Contains one or more GPIO descriptor (the numper of descriptor
+      depends on the number of R/B pins exposed by the flash) for the
+      Ready/Busy pins. Active state refers to the NAND ready state and
+      should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
+
+  wp-gpios:
+    description:
+      Contains one GPIO descriptor for the Write Protect pin.
+      Active state refers to the NAND Write Protect state and should be
+      set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+    maxItems: 1
+
+required:
+  - reg
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
new file mode 100644
index 0000000000..cc6b8274e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/renesas-nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a06g032-nandc
+          - const: renesas,rzn1-nandc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB host controller clock
+      - description: External NAND bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: eclk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    nand-controller@40102000 {
+        compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+        reg = <0x40102000 0x2000>;
+        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+        clock-names = "hclk", "eclk";
+        power-domains = <&sysctrl>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
new file mode 100644
index 0000000000..ee53715ffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/rockchip,nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoCs NAND FLASH Controller (NFC)
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,px30-nfc
+      - const: rockchip,rk2928-nfc
+      - const: rockchip,rv1108-nfc
+      - items:
+          - enum:
+              - rockchip,rk3036-nfc
+              - rockchip,rk3128-nfc
+          - const: rockchip,rk2928-nfc
+      - items:
+          - const: rockchip,rk3308-nfc
+          - const: rockchip,rv1108-nfc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ahb
+      - const: nfc
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [16, 24, 40, 60, 70]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            NFC v600 ECC 16, 24, 40, 60
+              RK2928, RK3066, RK3188
+
+            NFC v622 ECC 16, 24, 40, 60
+              RK3036, RK3128
+
+            NFC v800 ECC 16
+              RK3308, RV1108
+
+            NFC v900 ECC 16, 40, 60, 70
+              RK3326, PX30
+
+      nand-bus-width:
+        const: 8
+
+      rockchip,boot-blks:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 2
+        default: 16
+        description:
+          The NFC driver need this information to select ECC
+          algorithms supported by the boot ROM.
+          Only used in combination with 'nand-is-boot-medium'.
+
+      rockchip,boot-ecc-strength:
+        enum: [16, 24, 40, 60, 70]
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          If specified it indicates that a different BCH/ECC setting is
+          supported by the boot ROM.
+            NFC v600 ECC 16, 24
+              RK2928, RK3066, RK3188
+
+            NFC v622 ECC 16, 24, 40, 60
+              RK3036, RK3128
+
+            NFC v800 ECC 16
+              RK3308, RV1108
+
+            NFC v900 ECC 16, 70
+              RK3326, PX30
+
+          Only used in combination with 'nand-is-boot-medium'.
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3308-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nfc: nand-controller@ff4b0000 {
+      compatible = "rockchip,rk3308-nfc",
+                   "rockchip,rv1108-nfc";
+      reg = <0xff4b0000 0x4000>;
+      interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+      clock-names = "ahb", "nfc";
+      assigned-clocks = <&clks SCLK_NANDC>;
+      assigned-clock-rates = <150000000>;
+
+      pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+                   &flash_rdn &flash_rdy &flash_wrn>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        label = "rk-nand";
+        nand-bus-width = <8>;
+        nand-ecc-mode = "hw";
+        nand-ecc-step-size = <1024>;
+        nand-ecc-strength = <16>;
+        nand-is-boot-medium;
+        rockchip,boot-blks = <8>;
+        rockchip,boot-ecc-strength = <16>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
new file mode 100644
index 0000000000..09815c40fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/samsung-s3c2410.txt
@@ -0,0 +1,56 @@
+* Samsung S3C2410 and compatible NAND flash controller
+
+Required properties:
+- compatible : The possible values are:
+	"samsung,s3c2410-nand"
+	"samsung,s3c2412-nand"
+	"samsung,s3c2440-nand"
+- reg : register's location and length.
+- #address-cells, #size-cells : see nand-controller.yaml
+- clocks : phandle to the nand controller clock
+- clock-names : must contain "nand"
+
+Optional child nodes:
+Child nodes representing the available nand chips.
+
+Optional child properties:
+- nand-ecc-mode : see nand-controller.yaml
+- nand-on-flash-bbt : see nand-controller.yaml
+
+Each child device node may optionally contain a 'partitions' sub-node,
+which further contains sub-nodes describing the flash partition mapping.
+See partition.txt for more detail.
+
+Example:
+
+nand-controller@4e000000 {
+	compatible = "samsung,s3c2440-nand";
+	reg = <0x4e000000 0x40>;
+
+	#address-cells = <1>;
+        #size-cells = <0>;
+
+	clocks = <&clocks HCLK_NAND>;
+	clock-names = "nand";
+
+	nand {
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x040000>;
+			};
+
+			partition@40000 {
+				label = "kernel";
+				reg = <0x040000 0x500000>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt
new file mode 100644
index 0000000000..c41873e92d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt
@@ -0,0 +1,29 @@
+* SPEAr SMI
+
+Required properties:
+- compatible : "st,spear600-smi"
+- reg : Address range of the mtd chip
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- interrupts: Should contain the STMMAC interrupts
+- clock-rate : Functional clock rate of SMI in Hz
+
+Optional properties:
+- st,smi-fast-mode : Flash supports read in fast mode
+
+Example:
+
+	smi: flash@fc000000 {
+		compatible = "st,spear600-smi";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+		clock-rate = <50000000>;	/* 50MHz */
+
+		flash@f8000000 {
+			st,smi-fast-mode;
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
new file mode 100644
index 0000000000..77a8727c79
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: nand-chip.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: spi-nand
+
+  reg:
+    description: Encode the chip-select line on the SPI bus
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
new file mode 100644
index 0000000000..e72cb5baca
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/st,stm32-fmc2-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp15-fmc2
+      - st,stm32mp1-fmc2-nfc
+
+  reg:
+    minItems: 6
+    maxItems: 7
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+      - description: ecc DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+      - const: ecc
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    $ref: raw-nand-chip.yaml
+    properties:
+      nand-ecc-step-size:
+        const: 512
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp15-fmc2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Registers
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+
+        clocks:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-fmc2-nfc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+
+    nand-controller@58002000 {
+        compatible = "st,stm32mp15-fmc2";
+        reg = <0x58002000 0x1000>,
+              <0x80000000 0x1000>,
+              <0x88010000 0x1000>,
+              <0x88020000 0x1000>,
+              <0x81000000 0x1000>,
+              <0x89010000 0x1000>,
+              <0x89020000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+               <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+               <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+        dma-names = "tx", "rx", "ecc";
+        clocks = <&rcc FMC_K>;
+        resets = <&rcc FMC_R>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-on-flash-bbt;
+            #address-cells = <1>;
+            #size-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
new file mode 100644
index 0000000000..54cef9ef30
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -0,0 +1,25 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+  - compatible : Should be "st,spi-fsm"
+  - reg        : Contains register's location and length.
+  - reg-names  : Should contain the reg names "spi-fsm"
+  - interrupts : The interrupt number
+  - pinctrl-0  : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+  - st,syscfg          : Phandle to boot-device system configuration registers
+  - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+  - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+	spifsm: spifsm@fe902000{
+	        compatible         = "st,spi-fsm";
+	        reg                =  <0xfe902000 0x1000>;
+	        reg-names          = "spi-fsm";
+	        pinctrl-0          = <&pinctrl_fsm>;
+		st,syscfg	   = <&syscfg_rear>;
+	        st,boot-device-reg = <0x958>;
+	        st,boot-device-spi = <0x1a>;
+	};
+
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
new file mode 100644
index 0000000000..df4fdc0245
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,am654-hbmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HyperBus Memory Controller (HBMC) on TI's K3 family of SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    const: ti,am654-hbmc
+
+  reg:
+    maxItems: 2
+
+  power-domains: true
+  '#address-cells': true
+  '#size-cells': true
+  ranges: true
+
+  mux-controls:
+    description: MMIO mux controller node to select b/w OSPI and HBMC.
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  "^flash@[0-1],[0-9a-f]+$":
+    type: object
+    $ref: mtd-physmap.yaml
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        hbmc: memory-controller@47034000 {
+            compatible = "ti,am654-hbmc";
+            reg = <0x0 0x47034000 0x0 0x100>,
+                  <0x5 0x00000000 0x1 0x0000000>;
+            ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
+                     <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
+            clocks = <&k3_clks 102 0>;
+            #address-cells = <2>;
+            #size-cells = <1>;
+            power-domains = <&k3_pds 55>;
+            mux-controls = <&hbmc_mux 0>;
+
+            flash@0,0 {
+                compatible = "cypress,hyperflash", "cfi-flash";
+                reg = <0x0 0x0 0x4000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,elm.yaml b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
new file mode 100644
index 0000000000..87128c0045
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,elm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Error Location Module (ELM).
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  ELM module is used together with GPMC and NAND Flash to detect
+  errors and the location of the error based on BCH algorithms
+  so they can be corrected if possible.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-elm
+      - ti,am64-elm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Functional clock.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with ELM. This is for legacy
+      platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-elm
+    then:
+      required:
+        - clocks
+        - clock-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    elm: ecc@0 {
+        compatible = "ti,am3352-elm";
+        reg = <0x0 0x2000>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
new file mode 100644
index 0000000000..115682fa81
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC NAND Flash controller.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC NAND controller/Flash is represented as a child of the
+  GPMC controller node.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am64-nand
+          - ti,omap2-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for fifoevent
+      - description: Interrupt for termcount
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  ti,nand-ecc-opt:
+    description: Desired ECC algorithm
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [sw, ham1, bch4, bch8, bch16]
+
+  ti,nand-xfer-type:
+    description: Data transfer method between controller and chip.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
+    default: prefetch-polled
+
+  ti,elm-id:
+    description:
+      phandle to the ELM (Error Location Module).
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-bus-width:
+    description:
+      Bus width to the NAND chip
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+
+  rb-gpios:
+    description:
+      GPIO connection to R/B signal from NAND chip
+    maxItems: 1
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: /schemas/mtd/partitions/partition.yaml
+
+allOf:
+  - $ref: /schemas/memory-controllers/ti,gpmc-child.yaml
+
+required:
+  - compatible
+  - reg
+  - ti,nand-ecc-opt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      clocks = <&l3s_gclk>;
+      clock-names = "fck";
+      reg = <0x50000000 0x2000>;
+      interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+      gpmc,num-cs = <7>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      ranges = <0 0 0x08000000 0x01000000>;   /* CS0 space. Min partition = 16MB */
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;          /* device IO registers */
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* NAND generic properties */
+        nand-bus-width = <8>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;  /* gpmc_wait0 */
+
+        /* GPMC properties*/
+        gpmc,device-width = <1>;
+
+        partition@0 {
+          label = "NAND.SPL";
+          reg = <0x00000000 0x00040000>;
+        };
+        partition@1 {
+          label = "NAND.SPL.backup1";
+          reg = <0x00040000 0x00040000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
new file mode 100644
index 0000000000..7d3ace4f55
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OneNAND over Texas Instruments GPMC bus.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC connected OneNAND (found on OMAP boards) are represented
+  as child nodes of the GPMC controller.
+
+properties:
+  $nodename:
+    pattern: "^onenand@[0-9],[0,9]$"
+
+  compatible:
+    const: ti,omap2-onenand
+
+  reg:
+    items:
+      - description: |
+          Chip Select number, register offset and size of
+          OneNAND register window.
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  int-gpios:
+    description: GPIO specifier for the INT pin.
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: /schemas/mtd/partitions/partition.yaml
+
+allOf:
+  - $ref: /schemas/memory-controllers/ti,gpmc-child.yaml
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpmc: memory-controller@6e000000 {
+      compatible = "ti,omap3430-gpmc";
+      reg = <0x6e000000 0x02d0>;
+      interrupts = <20>;
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <4>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
+               <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
+
+      onenand@0,0 {
+        compatible = "ti,omap2-onenand";
+        reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+          label = "bootloader";
+          reg = <0x00000000 0x00100000>;
+        };
+
+        partition@100000 {
+          label = "config";
+          reg = <0x00100000 0x002c0000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
new file mode 100644
index 0000000000..7db5e6e609
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/vf610-nfc.txt
@@ -0,0 +1,59 @@
+Freescale's NAND flash controller (NFC)
+
+This variant of the Freescale NAND flash controller (NFC) can be found on
+Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70.
+
+Required properties:
+- compatible: Should be set to "fsl,vf610-nfc".
+- reg: address range of the NFC.
+- interrupts: interrupt of the NFC.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
+- assigned-clock-rates: The NAND bus timing is derived from this clock
+    rate and should not exceed maximum timing for any NAND memory chip
+    in a board stuffing. Typical NAND memory timings derived from this
+    clock are found in the SoC hardware reference manual. Furthermore,
+    there might be restrictions on maximum rates when using hardware ECC.
+
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+
+Required children nodes:
+Children nodes represent the available nand chips. Currently the driver can
+only handle one NAND chip.
+
+Required properties:
+- compatible: Should be set to "fsl,vf610-nfc-cs".
+- nand-bus-width: see nand-controller.yaml
+- nand-ecc-mode: see nand-controller.yaml
+
+Required properties for hardware ECC:
+- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand-controller.yaml)
+- nand-ecc-step-size: step size equals page size, currently only 2k pages are
+    supported
+- nand-on-flash-bbt: see nand-controller.yaml
+
+Example:
+
+	nfc: nand@400e0000 {
+		compatible = "fsl,vf610-nfc";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x400e0000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks VF610_CLK_NFC>;
+		clock-names = "nfc";
+		assigned-clocks = <&clks VF610_CLK_NFC>;
+		assigned-clock-rates = <33000000>;
+
+		nand@0 {
+			compatible = "fsl,vf610-nfc-nandcs";
+			reg = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <32>;
+			nand-ecc-step-size = <2048>;
+			nand-on-flash-bbt;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mux/adi,adg792a.txt b/Documentation/devicetree/bindings/mux/adi,adg792a.txt
new file mode 100644
index 0000000000..b0e5bf6903
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/adi,adg792a.txt
@@ -0,0 +1,75 @@
+Bindings for Analog Devices ADG792A/G Triple 4:1 Multiplexers
+
+Required properties:
+- compatible : "adi,adg792a" or "adi,adg792g"
+- #mux-control-cells : <0> if parallel (the three muxes are bound together
+  with a single mux controller controlling all three muxes), or <1> if
+  not (one mux controller for each mux).
+* Standard mux-controller bindings as described in mux-controller.yaml
+
+Optional properties for ADG792G:
+- gpio-controller : if present, #gpio-cells below is required.
+- #gpio-cells : should be <2>
+			  - First cell is the GPO line number, i.e. 0 or 1
+			  - Second cell is used to specify active high (0)
+			    or active low (1)
+
+Optional properties:
+- idle-state : if present, array of states that the mux controllers will have
+  when idle. The special state MUX_IDLE_AS_IS is the default and
+  MUX_IDLE_DISCONNECT is also supported.
+
+States 0 through 3 correspond to signals A through D in the datasheet.
+
+Example:
+
+	/*
+	 * Three independent mux controllers (of which one is used).
+	 * Mux 0 is disconnected when idle, mux 1 idles in the previously
+	 * selected state and mux 2 idles with signal B.
+	 */
+	&i2c0 {
+		mux: mux-controller@50 {
+			compatible = "adi,adg792a";
+			reg = <0x50>;
+			#mux-control-cells = <1>;
+
+			idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 1>;
+		};
+	};
+
+	adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux 2>;
+
+		channels = "sync-1", "", "out";
+	};
+
+
+	/*
+	 * Three parallel muxes with one mux controller, useful e.g. if
+	 * the adc is differential, thus needing two signals to be muxed
+	 * simultaneously for correct operation.
+	 */
+	&i2c0 {
+		pmux: mux-controller@50 {
+			compatible = "adi,adg792a";
+			reg = <0x50>;
+			#mux-control-cells = <0>;
+
+			idle-state = <1>;
+		};
+	};
+
+	diff-adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&pmux>;
+
+		channels = "sync-1", "", "out";
+	};
diff --git a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
new file mode 100644
index 0000000000..453a38961c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
@@ -0,0 +1,48 @@
+Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
+
+Required properties:
+- compatible : Should be one of
+	* "adi,adgs1408"
+	* "adi,adgs1409"
+* Standard mux-controller bindings as described in mux-controller.yaml
+
+Optional properties for ADGS1408/1409:
+- gpio-controller : if present, #gpio-cells is required.
+- #gpio-cells : should be <2>
+			- First cell is the GPO line number, i.e. 0 to 3
+			for ADGS1408 and 0 to 4 for ADGS1409
+			- Second cell is used to specify active high (0)
+			or active low (1)
+
+Optional properties:
+- idle-state : if present, the state that the mux controller will have
+  when idle. The special state MUX_IDLE_AS_IS is the default and
+  MUX_IDLE_DISCONNECT is also supported.
+
+States 0 through 7 correspond to signals S1 through S8 in the datasheet.
+For ADGS1409 only states 0 to 3 are available.
+
+Example:
+
+	/*
+	 * One mux controller.
+	 * Mux state set to idle as is (no idle-state declared)
+	 */
+	&spi0 {
+		mux: mux-controller@0 {
+			compatible = "adi,adgs1408";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+			#mux-control-cells = <0>;
+		};
+	}
+
+	adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels = "out_a0", "out_a1", "test0", "test1",
+			"out_b0", "out_b1", "testb0", "testb1";
+	};
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
new file mode 100644
index 0000000000..b597c1f2c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/gpio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based multiplexer controller
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  Define what GPIO pins are used to control a multiplexer. Or several
+  multiplexers, if the same pins control more than one multiplexer.
+
+  The multiplexer state is defined as the number represented by the
+  multiplexer GPIO pins, where the first pin is the least significant
+  bit. An active pin is a binary 1, an inactive pin is a binary 0.
+
+properties:
+  compatible:
+    const: gpio-mux
+
+  mux-gpios:
+    description:
+      List of gpios used to control the multiplexer, least significant bit first.
+
+  '#mux-control-cells':
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
+  idle-state:
+    default: -1
+
+required:
+  - compatible
+  - mux-gpios
+anyOf:
+  - required:
+      - "#mux-control-cells"
+  - required:
+      - "#mux-state-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+              <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux>;
+
+        channels = "sync-1", "in", "out", "sync-2";
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307: oled@3c {
+                reg = <0x3c>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pca9555: pca9555@20 {
+                reg = <0x20>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
new file mode 100644
index 0000000000..9e2d78a78e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller consumer
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  Mux controller consumers should specify a list of mux controllers that they
+  want to use with a property containing a 'mux-ctrl-list':
+
+    mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
+    single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
+    mux-ctrl-phandle : phandle to mux controller node
+    mux-ctrl-specifier : array of #mux-control-cells specifying the
+                         given mux controller (controller specific)
+
+  Mux controller properties should be named "mux-controls". The exact meaning of
+  each mux controller property must be documented in the device tree binding for
+  each consumer. An optional property "mux-control-names" may contain a list of
+  strings to label each of the mux controllers listed in the "mux-controls"
+  property.
+
+  If it is required to provide the state that the mux controller needs to
+  be set to, the property "mux-states" must be used. An optional property
+  "mux-state-names" can be used to provide a list of strings, to label
+  each of the multiplixer states listed in the "mux-states" property.
+
+  Properties "mux-controls" and "mux-states" can be used depending on how
+  the consumers want to control the mux controller. If the consumer needs
+  needs to set multiple states in a mux controller, then property
+  "mux-controls" can be used. If the consumer needs to set the mux
+  controller to a given state then property "mux-states" can be used.
+
+  mux-ctrl-specifier typically encodes the chip-relative mux controller number.
+  If the mux controller chip only provides a single mux controller, the
+  mux-ctrl-specifier can typically be left out.
+
+select: true
+
+properties:
+  mux-controls:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mux-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mux-control-names:
+    description:
+      Devices that use more than a single mux controller can use the
+      "mux-control-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-controls" property.
+
+  mux-state-names:
+    description:
+      Devices that use more than a single multiplexer state can use the
+      "mux-state-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-states"
+      property.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
new file mode 100644
index 0000000000..8b943082a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller provider
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  A multiplexer (or mux) controller will have one, or several, consumer devices
+  that uses the mux controller. Thus, a mux controller can possibly control
+  several parallel multiplexers. Presumably there will be at least one
+  multiplexer needed by each consumer, but a single mux controller can of course
+  control several multiplexers for a single consumer.
+
+  A mux controller provides a number of states to its consumers, and the state
+  space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
+  0-7 for an 8-way multiplexer, etc.
+
+
+  Mux controller nodes
+  --------------------
+
+  Mux controller nodes must specify the number of cells used for the
+  specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+  The value of '#mux-state-cells' will always be one greater than the value
+  of '#mux-control-cells'.
+
+  Optionally, mux controller nodes can also specify the state the mux should
+  have when it is idle. The idle-state property is used for this. If the
+  idle-state is not present, the mux controller is typically left as is when
+  it is idle. For multiplexer chips that expose several mux controllers, the
+  idle-state property is an array with one idle state for each mux controller.
+
+  The special value (-1) may be used to indicate that the mux should be left
+  as is when it is idle. This is the default, but can still be useful for
+  mux controller chips with more than one mux controller, particularly when
+  there is a need to "step past" a mux controller and set some other idle
+  state for a mux controller with a higher index.
+
+  Some mux controllers have the ability to disconnect the input/output of the
+  multiplexer. Using this disconnected high-impedance state as the idle state
+  is indicated with idle state (-2).
+
+  These constants are available in
+
+        #include <dt-bindings/mux/mux.h>
+
+  as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2).
+
+  An example mux controller node look like this (the adg972a chip is a triple
+  4-way multiplexer):
+
+    mux: mux-controller@50 {
+      compatible = "adi,adg792a";
+      reg = <0x50>;
+      #mux-control-cells = <1>;
+
+      idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
+    };
+
+select:
+  anyOf:
+    - properties:
+        $nodename:
+          pattern: '^mux-controller'
+    - required:
+        - '#mux-control-cells'
+    - required:
+        - '#mux-state-cells'
+
+properties:
+  $nodename:
+    pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+
+  '#mux-control-cells':
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
+  idle-state:
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -2
+
+  idle-states:
+    description: |
+      Mux controller nodes can specify the state the mux should have when it is
+      idle. If the idle-state is not present, the mux controller is typically
+      left as is when it is idle. For multiplexer chips that expose several mux
+      controllers, the idle-state property is an array with one idle state for
+      each mux controller.
+
+      The special value (-1) may be used to indicate that the mux should be left
+      as is when it is idle. This is the default, but can still be useful for
+      mux controller chips with more than one mux controller, particularly when
+      there is a need to "step past" a mux controller and set some other idle
+      state for a mux controller with a higher index.
+
+      Some mux controllers have the ability to disconnect the input/output of the
+      multiplexer. Using this disconnected high-impedance state as the idle state
+      is indicated with idle state (-2).
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    items:
+      minimum: -2
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* One consumer of a 2-way mux controller (one GPIO-line) */
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux>;
+        mux-control-names = "adc";
+
+        channels = "sync", "in";
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /*
+     * Two consumers (one for an ADC line and one for an i2c bus) of
+     * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+     */
+    mux2: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+              <&pioA 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    adc-mux {
+        compatible = "io-channel-mux";
+        io-channels = <&adc 0>;
+        io-channel-names = "parent";
+
+        mux-controls = <&mux2>;
+
+        channels = "sync-1", "in", "out", "sync-2";
+    };
+
+    i2c-mux {
+        compatible = "i2c-mux";
+        i2c-parent = <&i2c1>;
+
+        mux-controls = <&mux2>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307: oled@3c {
+                reg = <0x3c>;
+            };
+        };
+
+        i2c@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pca9555: pca9555@20 {
+                reg = <0x20>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux1: mux-controller {
+        compatible = "gpio-mux";
+        #mux-state-cells = <1>;
+        mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    transceiver4: can-phy4 {
+        compatible = "ti,tcan1042";
+        #phy-cells = <0>;
+        max-bitrate = <5000000>;
+        standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+        mux-states = <&mux1 1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
new file mode 100644
index 0000000000..dc4be092fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/reg-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic register bitfield-based multiplexer controller
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+description: |+
+  Define register bitfields to be used to control multiplexers. The parent
+  device tree node must be a device node to provide register r/w access.
+
+properties:
+  compatible:
+    enum:
+      - reg-mux   # parent device of mux controller is not syscon device
+      - mmio-mux  # parent device of mux controller is syscon device
+
+  reg: true
+
+  '#mux-control-cells':
+    const: 1
+
+  mux-reg-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: register offset
+        - description: pre-shifted bitfield mask
+    description: Each entry pair describes a single mux control.
+
+  idle-states: true
+
+required:
+  - compatible
+  - mux-reg-masks
+  - '#mux-control-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* The parent device of mux controller is not a syscon device. */
+
+    #include <dt-bindings/mux/mux.h>
+
+    mux-controller {
+        compatible = "reg-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks =
+            <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+            <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+    };
+
+    mdio-mux-1 {
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux1 0>;
+        mdio-parent-bus = <&emdio1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@8 {
+            reg = <0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+    mdio-mux-2 {
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux1 1>;
+        mdio-parent-bus = <&emdio2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+  - |
+    /* The parent device of mux controller is syscon device. */
+
+    #include <dt-bindings/mux/mux.h>
+    syscon@1000 {
+        reg = <0x1000 0x100>;
+
+        mux2: mux-controller {
+            compatible = "mmio-mux";
+            #mux-control-cells = <1>;
+
+            mux-reg-masks =
+                <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
+                <0x3 0x40>; /* 1: reg 0x3, bit 6 */
+            idle-states = <MUX_IDLE_AS_IS>, <0>;
+        };
+    };
+
+    video-mux {
+        compatible = "video-mux";
+        mux-controls = <&mux2 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* inputs 0..3 */
+            port@0 {
+                reg = <0>;
+            };
+            port@1 {
+                reg = <1>;
+            };
+            port@2 {
+                reg = <2>;
+            };
+            port@3 {
+                reg = <3>;
+            };
+
+            /* output */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
new file mode 100644
index 0000000000..5718ab4654
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs Ethernet MAC Controller
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  This Ethernet MAC is used on the Owl family of SoCs from Actions Semi.
+  It provides the RMII and SMII interfaces and is compliant with the
+  IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex
+  operation modes at 10/100 Mb/s data transfer rates.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: actions,owl-emac
+      - items:
+          - enum:
+              - actions,s500-emac
+          - const: actions,owl-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: eth
+      - const: rmii
+
+  resets:
+    maxItems: 1
+
+  actions,ethcfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the device containing custom config.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - phy-mode
+  - phy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/actions,s500-cmu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/actions,s500-reset.h>
+
+    ethernet@b0310000 {
+        compatible = "actions,s500-emac", "actions,owl-emac";
+        reg = <0xb0310000 0x10000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>;
+        clock-names = "eth", "rmii";
+        resets = <&cmu RESET_ETHERNET>;
+        phy-mode = "rmii";
+        phy-handle = <&eth_phy>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@3 {
+                reg = <0x3>;
+                interrupt-parent = <&sirq>;
+                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
new file mode 100644
index 0000000000..929cf8c0b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1200/ADIN1300 PHY
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Bindings for Analog Devices Industrial Ethernet PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  adi,rx-internal-delay-ps:
+    description: |
+      RGMII RX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+    enum: [ 1600, 1800, 2000, 2200, 2400 ]
+    default: 2000
+
+  adi,tx-internal-delay-ps:
+    description: |
+      RGMII TX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+    enum: [ 1600, 1800, 2000, 2200, 2400 ]
+    default: 2000
+
+  adi,fifo-depth-bits:
+    description: |
+      When operating in RMII mode, this option configures the FIFO depth.
+    enum: [ 4, 8, 12, 16, 20, 24 ]
+    default: 8
+
+  adi,phy-output-clock:
+    description: |
+      Select clock output on GP_CLK pin. Two clocks are available:
+      A 25MHz reference and a free-running 125MHz.
+      The phy can alternatively automatically switch between the reference and
+      the 125MHz clocks based on its internal state.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - 25mhz-reference
+      - 125mhz-free-running
+      - adaptive-free-running
+
+  adi,phy-output-reference-clock:
+    description: Enable 25MHz reference clock output on CLK25_REF pin.
+    type: boolean
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy-mode = "rgmii-id";
+
+        ethernet-phy@0 {
+            reg = <0>;
+
+            adi,rx-internal-delay-ps = <1800>;
+            adi,tx-internal-delay-ps = <2200>;
+        };
+    };
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy-mode = "rmii";
+
+        ethernet-phy@1 {
+            reg = <1>;
+
+            adi,fifo-depth-bits = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
new file mode 100644
index 0000000000..9de865295d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADI ADIN1110 MAC-PHY
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  The ADIN1110 is a low power single port 10BASE-T1L MAC-
+  PHY designed for industrial Ethernet applications. It integrates
+  an Ethernet PHY core with a MAC and all the associated analog
+  circuitry, input and output clock buffering.
+
+  The ADIN2111 is a low power, low complexity, two-Ethernet ports
+  switch with integrated 10BASE-T1L PHYs and one serial peripheral
+  interface (SPI) port. The device is designed for industrial Ethernet
+  applications using low power constrained nodes and is compliant
+  with the IEEE 802.3cg-2019 Ethernet standard for long reach
+  10 Mbps single pair Ethernet (SPE).
+
+  The device has a 4-wire SPI interface for communication
+  between the MAC and host processor.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adin1110
+      - adi,adin2111
+
+  reg:
+    maxItems: 1
+
+  adi,spi-crc:
+    description: |
+      Enable CRC8 checks on SPI read/writes.
+    type: boolean
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "adi,adin2111";
+            reg = <0>;
+            spi-max-frequency = <24500000>;
+
+            adi,spi-crc;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+            local-mac-address = [ 00 11 22 33 44 55 ];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
new file mode 100644
index 0000000000..eb26623dab
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 EMAC Ethernet Controller
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  allwinner,sram:
+    description: Phandle to the device SRAM
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - phy-handle
+  - allwinner,sram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    emac: ethernet@1c0b000 {
+        compatible = "allwinner,sun4i-a10-emac";
+        reg = <0x01c0b000 0x1000>;
+        interrupts = <55>;
+        clocks = <&ahb_gates 17>;
+        phy-handle = <&phy0>;
+        allwinner,sram = <&emac_sram 1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
new file mode 100644
index 0000000000..85f552b907
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MDIO Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: mdio.yaml#
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun4i-a10-mdio
+
+        # Deprecated
+        - allwinner,sun4i-mdio
+
+  required:
+    - compatible
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-mdio
+
+  reg:
+    maxItems: 1
+
+  phy-supply:
+    description: PHY regulator
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@1c0b080 {
+        compatible = "allwinner,sun4i-a10-mdio";
+        reg = <0x01c0b080 0x14>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy-supply = <&reg_emac_3v3>;
+
+        phy0: ethernet-phy@0 {
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
new file mode 100644
index 0000000000..23e92be33a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun7i-a20-gmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: TX clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: allwinner_gmac_tx
+
+  phy-supply:
+    description:
+      PHY regulator
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gmac: ethernet@1c50000 {
+        compatible = "allwinner,sun7i-a20-gmac";
+        reg = <0x01c50000 0x10000>;
+        interrupts = <0 85 1>;
+        interrupt-names = "macirq";
+        clocks = <&ahb_gates 49>, <&gmac_tx>;
+        clock-names = "stmmaceth", "allwinner_gmac_tx";
+        phy-mode = "mii";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
new file mode 100644
index 0000000000..4bfac91868
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -0,0 +1,322 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t EMAC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-emac
+      - const: allwinner,sun8i-h3-emac
+      - const: allwinner,sun8i-r40-gmac
+      - const: allwinner,sun8i-v3s-emac
+      - const: allwinner,sun50i-a64-emac
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-emac
+              - allwinner,sun50i-h6-emac
+              - allwinner,sun50i-h616-emac0
+          - const: allwinner,sun50i-a64-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: stmmaceth
+
+  phy-supply:
+    description: PHY regulator
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the device containing the EMAC or GMAC clock
+      register
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phy-handle
+  - phy-mode
+  - syscon
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a83t-emac
+              - allwinner,sun8i-h3-emac
+              - allwinner,sun8i-v3s-emac
+              - allwinner,sun50i-a64-emac
+
+    then:
+      properties:
+        allwinner,tx-delay-ps:
+          default: 0
+          minimum: 0
+          maximum: 700
+          multipleOf: 100
+          description:
+            External RGMII PHY TX clock delay chain value in ps.
+
+        allwinner,rx-delay-ps:
+          default: 0
+          minimum: 0
+          maximum: 3100
+          multipleOf: 100
+          description:
+            External RGMII PHY TX clock delay chain value in ps.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-r40-gmac
+
+    then:
+      properties:
+        allwinner,rx-delay-ps:
+          default: 0
+          minimum: 0
+          maximum: 700
+          multipleOf: 100
+          description:
+            External RGMII PHY TX clock delay chain value in ps.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-h3-emac
+              - allwinner,sun8i-v3s-emac
+
+    then:
+      properties:
+        allwinner,leds-active-low:
+          $ref: /schemas/types.yaml#/definitions/flag
+          description:
+            EPHY LEDs are active low.
+
+        mdio-mux:
+          type: object
+          unevaluatedProperties: false
+
+          properties:
+            compatible:
+              const: allwinner,sun8i-h3-mdio-mux
+
+            mdio-parent-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description:
+                Phandle to EMAC MDIO.
+
+            "#address-cells":
+              const: 1
+
+            "#size-cells":
+              const: 0
+
+            mdio@1:
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
+              description: Internal MDIO Bus
+
+              properties:
+                compatible:
+                  const: allwinner,sun8i-h3-mdio-internal
+
+                reg:
+                  const: 1
+
+              patternProperties:
+                "^ethernet-phy@[0-9a-f]$":
+                  type: object
+                  description:
+                    Integrated PHY node
+
+                  properties:
+                    clocks:
+                      maxItems: 1
+
+                    resets:
+                      maxItems: 1
+
+                  required:
+                    - clocks
+                    - resets
+
+
+            mdio@2:
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
+              description: External MDIO Bus (H3 only)
+
+              properties:
+                reg:
+                  const: 2
+
+          required:
+            - compatible
+            - mdio-parent-bus
+            - mdio@1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@1c0b000 {
+        compatible = "allwinner,sun8i-h3-emac";
+        syscon = <&syscon>;
+        reg = <0x01c0b000 0x104>;
+        interrupts = <0 82 1>;
+        interrupt-names = "macirq";
+        resets = <&ccu 12>;
+        reset-names = "stmmaceth";
+        clocks = <&ccu 27>;
+        clock-names = "stmmaceth";
+
+        phy-handle = <&int_mii_phy>;
+        phy-mode = "mii";
+        allwinner,leds-active-low;
+
+        mdio1: mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+        };
+
+        mdio-mux {
+            compatible = "allwinner,sun8i-h3-mdio-mux";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mdio-parent-bus = <&mdio1>;
+
+            int_mii_phy: mdio@1 {
+                compatible = "allwinner,sun8i-h3-mdio-internal";
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-phy@1 {
+                    reg = <1>;
+                    clocks = <&ccu 67>;
+                    resets = <&ccu 39>;
+                    phy-is-integrated;
+                };
+            };
+
+            mdio@2 {
+                reg = <2>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
+
+  - |
+    ethernet@1c0b000 {
+        compatible = "allwinner,sun8i-h3-emac";
+        syscon = <&syscon>;
+        reg = <0x01c0b000 0x104>;
+        interrupts = <0 82 1>;
+        interrupt-names = "macirq";
+        resets = <&ccu 12>;
+        reset-names = "stmmaceth";
+        clocks = <&ccu 27>;
+        clock-names = "stmmaceth";
+
+        phy-handle = <&ext_rgmii_phy>;
+        phy-mode = "rgmii";
+        allwinner,leds-active-low;
+
+        mdio2: mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+        };
+
+        mdio-mux {
+            compatible = "allwinner,sun8i-h3-mdio-mux";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            mdio-parent-bus = <&mdio2>;
+
+            mdio@1 {
+                compatible = "allwinner,sun8i-h3-mdio-internal";
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ethernet-phy@1 {
+                    reg = <1>;
+                    clocks = <&ccu 67>;
+                    resets = <&ccu 39>;
+                };
+            };
+
+            mdio@2 {
+                reg = <2>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ext_rgmii_phy: ethernet-phy@1 {
+                    reg = <1>;
+                };
+            };
+        };
+    };
+
+  - |
+    ethernet@1c0b000 {
+        compatible = "allwinner,sun8i-a83t-emac";
+        syscon = <&syscon>;
+        reg = <0x01c0b000 0x104>;
+        interrupts = <0 82 1>;
+        interrupt-names = "macirq";
+        resets = <&ccu 13>;
+        reset-names = "stmmaceth";
+        clocks = <&ccu 27>;
+        clock-names = "stmmaceth";
+        phy-handle = <&ext_rgmii_phy1>;
+        phy-mode = "rgmii";
+
+        mdio {
+            compatible = "snps,dwmac-mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ext_rgmii_phy1: ethernet-phy@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml
new file mode 100644
index 0000000000..f5d3b70af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/altr,tse.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,tse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Triple Speed Ethernet MAC driver (TSE)
+
+maintainers:
+  - Maxime Chevallier <maxime.chevallier@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: altr,tse-1.0
+      - const: ALTR,tse-1.0
+        deprecated: true
+      - const: altr,tse-msgdma-1.0
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: rx_irq
+      - const: tx_irq
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the RX FIFO
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the TX FIFO
+
+  altr,has-supplementary-unicast:
+    type: boolean
+    description:
+      If present, TSE supports additional unicast addresses.
+
+  altr,has-hash-multicast-filter:
+    type: boolean
+    description:
+      If present, TSE supports hash based multicast filter.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Creates and registers an MDIO bus.
+
+    properties:
+      compatible:
+        const: altr,tse-mdio
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - rx-fifo-depth
+  - tx-fifo-depth
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - altr,tse-1.0
+              - ALTR,tse-1.0
+    then:
+      properties:
+        reg:
+          minItems: 4
+        reg-names:
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: tx_csr
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - altr,tse-msgdma-1.0
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 7
+        reg-names:
+          minItems: 6
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: rx_desc
+            - const: rx_resp
+            - const: tx_csr
+            - const: tx_desc
+            - const: pcs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tse_sub_0: ethernet@c0100000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0xc0100000 0x00000400>,
+              <0xc0101000 0x00000020>,
+              <0xc0102000 0x00000020>,
+              <0xc0103000 0x00000008>,
+              <0xc0104000 0x00000020>,
+              <0xc0105000 0x00000020>,
+              <0xc0106000 0x00000100>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs";
+        interrupt-parent = <&intc>;
+        interrupts = <0 44 4>,<0 45 4>;
+        interrupt-names = "rx_irq","tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        sfp = <&sfp0>;
+        phy-mode = "sgmii";
+        managed = "in-band-status";
+    };
+  - |
+    tse_sub_1_eth_tse_0: ethernet@1,00001000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0x00001000 0x00000400>,
+              <0x00001460 0x00000020>,
+              <0x00001480 0x00000020>,
+              <0x000014A0 0x00000008>,
+              <0x00001400 0x00000020>,
+              <0x00001420 0x00000020>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <0 43 4>, <0 42 4>;
+        interrupt-names = "rx_irq", "tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        phy-mode = "gmii";
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        phy-handle = <&phy1>;
+        mdio {
+            compatible = "altr,tse-mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                reg = <0x1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
new file mode 100644
index 0000000000..9c27dfcd11
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -0,0 +1,76 @@
+* AMD 10GbE driver (amd-xgbe)
+
+Required properties:
+- compatible: Should be "amd,xgbe-seattle-v1a"
+- reg: Address and length of the register sets for the device
+   - MAC registers
+   - PCS registers
+   - SerDes Rx/Tx registers
+   - SerDes integration registers (1/2)
+   - SerDes integration registers (2/2)
+- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
+  listed is required and is the general device interrupt. If the optional
+  amd,per-channel-interrupt property is specified, then one additional
+  interrupt for each DMA channel supported by the device should be specified.
+  The last interrupt listed should be the PCS auto-negotiation interrupt.
+- clocks:
+   - DMA clock for the amd-xgbe device (used for calculating the
+     correct Rx interrupt watchdog timer value on a DMA channel
+     for coalescing)
+   - PTP clock for the amd-xgbe device
+- clock-names: Should be the names of the clocks
+   - "dma_clk" for the DMA clock
+   - "ptp_clk" for the PTP clock
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
+  a unique interrupt for each DMA channel - this requires an additional
+  interrupt be configured for each DMA channel
+- amd,speed-set: Speed capabilities of the device
+    0 - 1GbE and 10GbE (default)
+    1 - 2.5GbE and 10GbE
+
+The MAC address will be determined using the optional properties defined in
+ethernet.txt.
+
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed.  All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+    0 - Off
+    1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
+
+Example:
+	xgbe@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>,
+		      <0 0xe1250000 0 0x00060>,
+		      <0 0xe1250080 0 0x00004>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 325 4>,
+			     <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		mac-address = [ 02 a1 a2 a3 a4 a5 ];
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <30>;
+		amd,serdes-tx-amp = <15>, <15>, <10>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
+	};
diff --git a/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml b/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml
new file mode 100644
index 0000000000..ec5c038ce6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amlogic,g12a-mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer/glue of Amlogic G12a SoC family
+
+description:
+  This is a special case of a MDIO bus multiplexer. It allows to choose between
+  the internal mdio bus leading to the embedded 10/100 PHY or the external
+  MDIO bus.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: amlogic,g12a-mdio-mux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: platform crytal
+      - description: SoC 50MHz MPLL
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: clkin0
+      - const: clkin1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mdio-multiplexer@4c000 {
+        compatible = "amlogic,g12a-mdio-mux";
+        reg = <0x4c000 0xa4>;
+        clocks = <&clkc_eth_phy>, <&xtal>, <&clkc_mpll>;
+        clock-names = "pclk", "clkin0", "clkin1";
+        mdio-parent-bus = <&mdio0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@8 {
+                compatible = "ethernet-phy-id0180.3301",
+                             "ethernet-phy-ieee802.3-c22";
+                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                reg = <8>;
+                max-speed = <100>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml b/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml
new file mode 100644
index 0000000000..27ae004dbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amlogic,gxl-mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GXL MDIO bus multiplexer
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+  This is a special case of a MDIO bus multiplexer. It allows to choose between
+  the internal mdio bus leading to the embedded 10/100 PHY or the external
+  MDIO bus on the Amlogic GXL SoC family.
+
+allOf:
+  - $ref: mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: amlogic,gxl-mdio-mux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eth_phy_mux: mdio@558 {
+      compatible = "amlogic,gxl-mdio-mux";
+      reg = <0x558 0xc>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&refclk>;
+      clock-names = "ref";
+      mdio-parent-bus = <&mdio0>;
+
+      external_mdio: mdio@0 {
+        reg = <0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+      internal_mdio: mdio@1 {
+        reg = <0x1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
new file mode 100644
index 0000000000..ee7a65b528
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson DWMAC Ethernet controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - amlogic,meson6-dwmac
+          - amlogic,meson8b-dwmac
+          - amlogic,meson8m2-dwmac
+          - amlogic,meson-gxbb-dwmac
+          - amlogic,meson-axg-dwmac
+          - amlogic,meson-g12a-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8b-dwmac
+              - amlogic,meson8m2-dwmac
+              - amlogic,meson-gxbb-dwmac
+              - amlogic,meson-axg-dwmac
+              - amlogic,meson-g12a-dwmac
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: GMAC main clock
+            - description: First parent clock of the internal mux
+            - description: Second parent clock of the internal mux
+            - description: The clock which drives the timing adjustment logic
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: stmmaceth
+            - const: clkin0
+            - const: clkin1
+            - const: timing-adjustment
+
+        amlogic,tx-delay-ns:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            The internal RGMII TX clock delay (provided by this driver) in
+            nanoseconds. Allowed values are 0ns, 2ns, 4ns, 6ns.
+            When phy-mode is set to "rgmii" then the TX delay should be
+            explicitly configured. When not configured a fallback of 2ns is
+            used. When the phy-mode is set to either "rgmii-id" or "rgmii-txid"
+            the TX clock delay is already provided by the PHY. In that case
+            this property should be set to 0ns (which disables the TX clock
+            delay in the MAC to prevent the clock from going off because both
+            PHY and MAC are adding a delay).
+            Any configuration is ignored when the phy-mode is set to "rmii".
+
+        amlogic,rx-delay-ns:
+          deprecated: true
+          enum:
+            - 0
+            - 2
+          default: 0
+          description:
+            The internal RGMII RX clock delay in nanoseconds. Deprecated, use
+            rx-internal-delay-ps instead.
+
+        rx-internal-delay-ps:
+          default: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8b-dwmac
+              - amlogic,meson8m2-dwmac
+              - amlogic,meson-gxbb-dwmac
+              - amlogic,meson-axg-dwmac
+    then:
+      properties:
+        rx-internal-delay-ps:
+          enum:
+            - 0
+            - 2000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-g12a-dwmac
+    then:
+      properties:
+        rx-internal-delay-ps:
+          enum:
+            - 0
+            - 200
+            - 400
+            - 600
+            - 800
+            - 1000
+            - 1200
+            - 1400
+            - 1600
+            - 1800
+            - 2000
+            - 2200
+            - 2400
+            - 2600
+            - 2800
+            - 3000
+
+properties:
+  compatible:
+    additionalItems: true
+    maxItems: 3
+    items:
+      - enum:
+          - amlogic,meson6-dwmac
+          - amlogic,meson8b-dwmac
+          - amlogic,meson8m2-dwmac
+          - amlogic,meson-gxbb-dwmac
+          - amlogic,meson-axg-dwmac
+          - amlogic,meson-g12a-dwmac
+    contains:
+      enum:
+        - snps,dwmac-3.70a
+        - snps,dwmac
+
+  reg:
+    items:
+      - description:
+          The first register range should be the one of the DWMAC controller
+      - description:
+          The second range is is for the Amlogic specific configuration
+          (for example the PRG_ETHERNET register range on Meson8b and newer)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethmac: ethernet@c9410000 {
+         compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+         reg = <0xc9410000 0x10000>, <0xc8834540 0x8>;
+         interrupts = <8>;
+         interrupt-names = "macirq";
+         clocks = <&clk_eth>, <&clk_fclk_div2>, <&clk_mpll2>, <&clk_fclk_div2>;
+         clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+         phy-mode = "rgmii";
+    };
diff --git a/Documentation/devicetree/bindings/net/anarion-gmac.txt b/Documentation/devicetree/bindings/net/anarion-gmac.txt
new file mode 100644
index 0000000000..fe678965ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/anarion-gmac.txt
@@ -0,0 +1,25 @@
+*  Adaptrum Anarion ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible:  Should be "adaptrum,anarion-gmac", "snps,dwmac"
+ - phy-mode:    Should be "rgmii". Other modes are not currently supported.
+
+
+Examples:
+
+	gmac1: ethernet@f2014000 {
+		compatible = "adaptrum,anarion-gmac", "snps,dwmac";
+		reg = <0xf2014000 0x4000>, <0xf2018100 8>;
+
+		interrupt-parent = <&core_intc>;
+		interrupts = <21>;
+		interrupt-names = "macirq";
+
+		clocks = <&core_clk>;
+		clock-names = "stmmaceth";
+
+		phy-mode = "rgmii";
+	};
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
new file mode 100644
index 0000000000..f591ab782d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -0,0 +1,91 @@
+APM X-Gene SoC Ethernet nodes
+
+Ethernet nodes are defined to describe on-chip ethernet interfaces in
+APM X-Gene SoC.
+
+Required properties for all the ethernet interfaces:
+- compatible: Should state binding information from the following list,
+  - "apm,xgene-enet":    RGMII based 1G interface
+  - "apm,xgene1-sgenet": SGMII based 1G interface
+  - "apm,xgene1-xgenet": XFI based 10G interface
+- reg: Address and length of the register set for the device. It contains the
+  information of registers in the same order as described by reg-names
+- reg-names: Should contain the register set names
+  - "enet_csr": Ethernet control and status register address space
+  - "ring_csr": Descriptor ring control and status register address space
+  - "ring_cmd": Descriptor ring command register address space
+- interrupts: Two interrupt specifiers can be specified.
+  - First is the Rx interrupt.  This irq is mandatory.
+  - Second is the Tx completion interrupt.
+    This is supported only on SGMII based 1GbE and 10GbE interfaces.
+- channel: Ethernet to CPU, start channel (prefetch buffer) number
+  - Must map to the first irq and irqs must be sequential
+- port-id: Port number (0 or 1)
+- clocks: Reference to the clock entry.
+- local-mac-address: MAC address assigned to this device
+- phy-connection-type: Interface type between ethernet device and PHY device
+
+Required properties for ethernet interfaces that have external PHY:
+- phy-handle: Reference to a PHY node connected to this device
+
+- mdio: Device tree subnode with the following required properties:
+  - compatible: Must be "apm,xgene-mdio".
+  - #address-cells: Must be <1>.
+  - #size-cells: Must be <0>.
+
+  For the phy on the mdio bus, there must be a node with the following fields:
+  - compatible: PHY identifier.  Please refer ./phy.txt for the format.
+  - reg: The ID number for the phy.
+
+Optional properties:
+- status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
+- tx-delay: Delay value for RGMII bridge TX clock.
+	    Valid values are between 0 to 7, that maps to
+	    417, 717, 1020, 1321, 1611, 1913, 2215, 2514 ps
+	    Default value is 4, which corresponds to 1611 ps
+- rx-delay: Delay value for RGMII bridge RX clock.
+	    Valid values are between 0 to 7, that maps to
+	    273, 589, 899, 1222, 1480, 1806, 2147, 2464 ps
+	    Default value is 2, which corresponds to 899 ps
+- rxlos-gpios: Input gpio from SFP+ module to indicate availability of
+	       incoming signal.
+
+
+Example:
+	menetclk: menetclk {
+		compatible = "apm,xgene-device-clock";
+		clock-output-names = "menetclk";
+		status = "ok";
+	};
+
+	menet: ethernet@17020000 {
+		compatible = "apm,xgene-enet";
+		status = "disabled";
+		reg = <0x0 0x17020000 0x0 0xd100>,
+		      <0x0 0x17030000 0x0 0x400>,
+		      <0x0 0x10000000 0x0 0x200>;
+		reg-names = "enet_csr", "ring_csr", "ring_cmd";
+		interrupts = <0x0 0x3c 0x4>;
+		port-id = <0>;
+		clocks = <&menetclk 0>;
+		local-mac-address = [00 01 73 00 00 01];
+		phy-connection-type = "rgmii";
+		phy-handle = <&menetphy>;
+		mdio {
+			compatible = "apm,xgene-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			menetphy: menetphy@3 {
+				compatible = "ethernet-phy-id001c.c915";
+				reg = <0x3>;
+			};
+
+		};
+	};
+
+/* Board-specific peripheral configurations */
+&menet {
+	tx-delay = <4>;
+	rx-delay = <2>;
+        status = "ok";
+};
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-mdio.txt b/Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
new file mode 100644
index 0000000000..78722d74ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/apm-xgene-mdio.txt
@@ -0,0 +1,37 @@
+APM X-Gene SoC MDIO node
+
+MDIO node is defined to describe on-chip MDIO controller.
+
+Required properties:
+	- compatible: Must be "apm,xgene-mdio-rgmii" or "apm,xgene-mdio-xfi"
+	- #address-cells: Must be <1>.
+	- #size-cells: Must be <0>.
+	- reg: Address and length of the register set
+	- clocks: Reference to the clock entry
+
+For the phys on the mdio bus, there must be a node with the following fields:
+	- compatible: PHY identifier.  Please refer ./phy.txt for the format.
+	- reg: The ID number for the phy.
+
+Example:
+
+	mdio: mdio@17020000 {
+		compatible = "apm,xgene-mdio-rgmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0x17020000 0x0 0xd100>;
+		clocks = <&menetclk 0>;
+	};
+
+	/* Board-specific peripheral configurations */
+	&mdio {
+		menetphy: phy@3 {
+			reg = <0x3>;
+		};
+		sgenet0phy: phy@4 {
+			reg = <0x4>;
+		};
+		sgenet1phy: phy@5 {
+			reg = <0x5>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
new file mode 100644
index 0000000000..c73a0e9c62
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/arc_emac.txt
@@ -0,0 +1,46 @@
+* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC)
+
+Required properties:
+- compatible: Should be "snps,arc-emac"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the EMAC interrupts
+- max-speed: see ethernet.txt file in the same directory.
+- phy: see ethernet.txt file in the same directory.
+
+Optional properties:
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds.  Should present
+  only if property "phy-reset-gpios" is available.  Missing the property
+  will have the duration be 1 millisecond.  Numbers greater than 1000 are
+  invalid and 1 millisecond will be used instead.
+
+Clock handling:
+The clock frequency is needed to calculate and set polling period of EMAC.
+It must be provided by one of:
+- clock-frequency: CPU frequency.
+- clocks: reference to the clock supplying the EMAC.
+
+Child nodes of the driver are the individual PHY devices connected to the
+MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
+
+Examples:
+
+	ethernet@c0fc2000 {
+		compatible = "snps,arc-emac";
+		reg = <0xc0fc2000 0x3c>;
+		interrupts = <6>;
+		mac-address = [ 00 11 22 33 44 55 ];
+
+		clock-frequency = <80000000>;
+		/* or */
+		clocks = <&emac_clock>;
+
+		max-speed = <100>;
+		phy = <&phy0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
new file mode 100644
index 0000000000..768504ccbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASIX AX88172/AX88772 USB Ethernet Controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired USB Ethernet devices.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbb95,1720   # ASIX AX88172
+          - usbb95,172a   # ASIX AX88172A
+          - usbb95,1780   # ASIX AX88178
+          - usbb95,7720   # ASIX AX88772
+          - usbb95,772a   # ASIX AX88772A
+          - usbb95,772b   # ASIX AX88772B
+          - usbb95,7e2b   # ASIX AX88772B
+
+  reg:
+    maxItems: 1
+
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usbb95,7e2b";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb1@1 {
+            compatible = "usb1234,5678";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+               compatible = "usbb95,772b";
+               reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
new file mode 100644
index 0000000000..6b849a4349
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASIX AX88796C SPI Ethernet Adapter
+
+maintainers:
+  - Łukasz Stelmach <l.stelmach@samsung.com>
+
+description: |
+  ASIX AX88796C is an Ethernet controller with a built in PHY. This
+  describes SPI mode of the chip.
+
+  The node for this driver must be a child node of an SPI controller,
+  hence all mandatory properties described in
+  ../spi/spi-controller.yaml must be specified.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+properties:
+  compatible:
+    const: asix,ax88796c
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 40000000
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  controller-data: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  # Artik5 eval board
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "asix,ax88796c";
+            reg = <0x0>;
+            local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+            interrupt-parent = <&gpx2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <40000000>;
+            reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
new file mode 100644
index 0000000000..d6ef468495
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 MDIO Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+  The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO
+  bus register interface, this time also separating out the controller from the
+  MAC.
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: aspeed,ast2600-mdio
+
+  reg:
+    maxItems: 1
+    description: The register range of the MDIO controller instance
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    mdio0: mdio@1e650000 {
+            compatible = "aspeed,ast2600-mdio";
+            reg = <0x1e650000 0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            resets = <&syscon ASPEED_RESET_MII>;
+
+            ethphy0: ethernet-phy@0 {
+                    compatible = "ethernet-phy-ieee802.3-c22";
+                    reg = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml b/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml
new file mode 100644
index 0000000000..59bb0d7e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/bluetooth-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth Controller Common Properties
+
+maintainers:
+  - Marcel Holtmann <marcel@holtmann.org>
+  - Johan Hedberg <johan.hedberg@gmail.com>
+  - Luiz Augusto von Dentz <luiz.dentz@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^bluetooth(@.*)?$"
+
+  local-bd-address:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 6
+    description:
+      Specifies the BD address that was uniquely assigned to the Bluetooth
+      device. Formatted with least significant byte first (little-endian), e.g.
+      in order to assign the address 00:11:22:33:44:55 this property must have
+      the value [55 44 33 22 11 00].
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
new file mode 100644
index 0000000000..37cb39a3a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4377 family PCIe Bluetooth Chips
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
+  usually found in Apple machines. The Wi-Fi part of the chip is described in
+  bindings/net/wireless/brcm,bcm4329-fmac.yaml.
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci14e4,5fa0 # BCM4377
+      - pci14e4,5f69 # BCM4378
+      - pci14e4,5f71 # BCM4387
+
+  reg:
+    maxItems: 1
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Board type of the Bluetooth chip. This is used to decouple
+      the overall system board from the Bluetooth module and used to construct
+      firmware and calibration data filenames.
+      On Apple platforms, this should be the Apple module-instance codename
+      prefixed by "apple,", e.g. "apple,atlantisb".
+    pattern: '^apple,.*'
+
+  brcm,taurus-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module does not
+      support beamforming.
+
+  brcm,taurus-bf-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module supports
+      beamforming.
+
+  local-bd-address: true
+
+required:
+  - compatible
+  - reg
+  - local-bd-address
+  - brcm,board-type
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie@a0000000 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xa0000000 0x1000000>;
+      device_type = "pci";
+      ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
+
+      bluetooth@0,1 {
+        compatible = "pci14e4,5f69";
+        reg = <0x100 0x0 0x0 0x0 0x0>;
+        brcm,board-type = "apple,honshu";
+        /* To be filled by the bootloader */
+        local-bd-address = [00 00 00 00 00 00];
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
new file mode 100644
index 0000000000..f01a398853
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Bluetooth chips
+
+description:
+  This binding describes UART-attached NXP bluetooth chips. These chips
+  are dual-radio chips supporting WiFi and Bluetooth. The bluetooth
+  works on standard H4 protocol over 4-wire UART. The RTS and CTS lines
+  are used during FW download. To enable power save mode, the host
+  asserts break signal over UART-TX line to put the chip into power save
+  state. De-asserting break wakes up the BT chip.
+
+maintainers:
+  - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,88w8987-bt
+      - nxp,88w8997-bt
+
+  fw-init-baudrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 115200
+    description:
+      Chip baudrate after FW is downloaded and initialized.
+      This property depends on the module vendor's
+      configuration.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        bluetooth {
+            compatible = "nxp,88w8987-bt";
+            fw-init-baudrate = <3000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
new file mode 100644
index 0000000000..eba2f3026a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+  - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+  This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca2066-bt
+      - qcom,qca6174-bt
+      - qcom,qca9377-bt
+      - qcom,wcn3988-bt
+      - qcom,wcn3990-bt
+      - qcom,wcn3991-bt
+      - qcom,wcn3998-bt
+      - qcom,qca6390-bt
+      - qcom,wcn6750-bt
+      - qcom,wcn6855-bt
+      - qcom,wcn7850-bt
+
+  enable-gpios:
+    maxItems: 1
+    description: gpio specifier used to enable chip
+
+  swctrl-gpios:
+    maxItems: 1
+    description: gpio specifier is used to find status
+                 of clock supply to SoC
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (SUSCLK_32KHZ)
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  vddxo-supply:
+    description: VDD_XO supply regulator handle
+
+  vddrf-supply:
+    description: VDD_RF supply regulator handle
+
+  vddch0-supply:
+    description: VDD_CH0 supply regulator handle
+
+  vddch1-supply:
+    description: VDD_CH1 supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vdddig-supply:
+    description: VDD_DIG supply regulator handle
+
+  vddbtcxmx-supply:
+    description: VDD_BT_CXMX supply regulator handle
+
+  vddrfacmn-supply:
+    description: VDD_RFA_CMN supply regulator handle
+
+  vddrfa0p8-supply:
+    description: VDD_RFA_0P8 suppply regulator handle
+
+  vddrfa1p7-supply:
+    description: VDD_RFA_1P7 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa1p9-supply:
+    description: VDD_RFA_1P9 supply regulator handle
+
+  vddrfa2p2-supply:
+    description: VDD_RFA_2P2 supply regulator handle
+
+  vddasd-supply:
+    description: VDD_ASD supply regulator handle
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+  firmware-name:
+    description: specify the name of nvm firmware to load
+
+  local-bd-address: true
+
+
+required:
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca2066-bt
+              - qcom,qca6174-bt
+    then:
+      required:
+        - enable-gpios
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3988-bt
+              - qcom,wcn3990-bt
+              - qcom,wcn3991-bt
+              - qcom,wcn3998-bt
+    then:
+      required:
+        - vddio-supply
+        - vddxo-supply
+        - vddrf-supply
+        - vddch0-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddaon-supply
+        - vddbtcxmx-supply
+        - vddrfacmn-supply
+        - vddrfa0p8-supply
+        - vddrfa1p7-supply
+        - vddrfa1p2-supply
+        - vddasd-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6855-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddbtcxmx-supply
+        - vddrfacmn-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p7-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn7850-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddaon-supply
+        - vdddig-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p9-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+
+        bluetooth {
+            compatible = "qcom,qca6174-bt";
+            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+            clocks = <&divclk4>;
+            firmware-name = "nvm_00440302.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn3990-bt";
+            vddio-supply = <&vreg_s4a_1p8>;
+            vddxo-supply = <&vreg_l7a_1p8>;
+            vddrf-supply = <&vreg_l17a_1p3>;
+            vddch0-supply = <&vreg_l25a_3p3>;
+            max-speed = <3200000>;
+            firmware-name = "crnv21.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn6750-bt";
+            pinctrl-names = "default";
+            pinctrl-0 = <&bt_en_default>;
+            enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+            swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+            vddio-supply = <&vreg_l19b_1p8>;
+            vddaon-supply = <&vreg_s7b_0p9>;
+            vddbtcxmx-supply = <&vreg_s7b_0p9>;
+            vddrfacmn-supply = <&vreg_s7b_0p9>;
+            vddrfa0p8-supply = <&vreg_s7b_0p9>;
+            vddrfa1p7-supply = <&vreg_s1b_1p8>;
+            vddrfa1p2-supply = <&vreg_s8b_1p2>;
+            vddrfa2p2-supply = <&vreg_s1c_2p2>;
+            vddasd-supply = <&vreg_l11c_2p8>;
+            max-speed = <3200000>;
+            firmware-name = "msnv11.bin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
new file mode 100644
index 0000000000..210fb29c4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,amac
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-amac
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-amac
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+
+properties:
+  compatible:
+    enum:
+      - brcm,amac
+      - brcm,nsp-amac
+      - brcm,ns2-amac
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: amac_base
+      - const: idm_base
+      - const: nicpm_base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   amac0: ethernet@18022000 {
+      compatible = "brcm,nsp-amac";
+      reg = <0x18022000 0x1000>,
+            <0x18110000 0x1000>;
+      reg-names = "amac_base", "idm_base";
+      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+   };
diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
new file mode 100644
index 0000000000..aa3162c748
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom ASP 2.0 Ethernet controller
+
+maintainers:
+  - Justin Chen <justin.chen@broadcom.com>
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+
+description: Broadcom Ethernet controller first introduced with 72165
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm74165-asp
+          - const: brcm,asp-v2.1
+      - items:
+          - enum:
+              - brcm,bcm72165-asp
+          - const: brcm,asp-v2.0
+
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: RX/TX interrupt
+      - description: Port 0 Wake-on-LAN
+      - description: Port 1 Wake-on-LAN
+
+  clocks:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^port@[0-9]+$":
+        type: object
+
+        $ref: ethernet-controller.yaml#
+
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+            description: Port number
+
+          brcm,channel:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: |
+              ASP Channel Number
+
+              The depacketizer channel that consumes packets from
+              the unimac/port.
+
+        required:
+          - reg
+          - brcm,channel
+
+    additionalProperties: false
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: brcm,unimac-mdio.yaml
+
+    description:
+      ASP internal UniMAC MDIO bus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@9c00000 {
+        compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0";
+        reg = <0x9c00000 0x1fff14>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+        ranges = <0x0 0x9c00000 0x1fff14>;
+        clocks = <&scmi 14>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mdio@c614 {
+            compatible = "brcm,asp-v2.0-mdio";
+            reg = <0xc614 0x8>;
+            reg-names = "mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy0: ethernet-phy@1 {
+                reg = <1>;
+            };
+       };
+
+        mdio@ce14 {
+            compatible = "brcm,asp-v2.0-mdio";
+            reg = <0xce14 0x8>;
+            reg-names = "mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy1: ethernet-phy@1 {
+                reg = <1>;
+            };
+        };
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                brcm,channel = <8>;
+                phy-mode = "rgmii";
+                phy-handle = <&phy0>;
+            };
+
+            port@1 {
+                reg = <1>;
+                brcm,channel = <9>;
+                phy-mode = "rgmii";
+                phy-handle = <&phy1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
new file mode 100644
index 0000000000..a93d2f1658
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm4908-enet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 Ethernet controller
+
+description: Broadcom's Ethernet controller integrated into BCM4908 family SoCs
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm4908-enet
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@80002000 {
+        compatible = "brcm,bcm4908-enet";
+        reg = <0x80002000 0x1000>;
+
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
new file mode 100644
index 0000000000..9ef28c2a0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm6368-mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 MDIO bus multiplexer
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm6368-mdio-mux
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio0: mdio@10e000b0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "brcm,bcm6368-mdio-mux";
+      reg = <0x10e000b0 0x6>;
+
+      mdio_int: mdio@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+      };
+
+      mdio_ext: mdio@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
new file mode 100644
index 0000000000..284cddb311
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@@ -0,0 +1,50 @@
+* Broadcom Starfighter 2 integrated switch
+
+See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation.
+
+*Deprecated* binding required properties:
+
+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
+- #address-cells: must be 2, see dsa/dsa.txt
+
+Example using the old DSA DeviceTree binding:
+
+switch_top@f0b00000 {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0 0xf0b00000 0x40804>;
+
+	ethernet_switch@0 {
+		compatible = "brcm,bcm7445-switch-v4.0";
+		#size-cells = <0>;
+		#address-cells = <2>;
+		reg = <0x0 0x40000
+			0x40000 0x110
+			0x40340 0x30
+			0x40380 0x30
+			0x40400 0x34
+			0x40600 0x208>;
+		interrupts = <0 0x18 0
+				0 0x19 0>;
+		brcm,num-gphy = <1>;
+		brcm,num-rgmii-ports = <2>;
+		brcm,fcb-pause-override;
+		brcm,acb-packets-inflight;
+
+		...
+		switch@0 {
+			reg = <0 0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+
+			port@0 {
+				label = "gphy";
+				reg = <0>;
+				brcm,use-bcm-hdr;
+			};
+			...
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
new file mode 100644
index 0000000000..7c90a43905
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Controller (GENET)
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-v1
+      - brcm,genet-v2
+      - brcm,genet-v3
+      - brcm,genet-v4
+      - brcm,genet-v5
+      - brcm,bcm2711-genet-v5
+      - brcm,bcm7712-genet-v5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: general purpose interrupt line
+      - description: RX and TX rings interrupt line
+      - description: Wake-on-LAN interrupt line
+
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main clock
+      - description: EEE clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enet
+      - const: enet-eee
+      - const: enet-wol
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: brcm,unimac-mdio.yaml
+
+    description:
+      GENET internal UniMAC MDIO bus
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f0b60000 {
+        phy-mode = "internal";
+        phy-handle = <&phy1>;
+        mac-address = [ 00 10 18 36 23 1a ];
+        compatible = "brcm,genet-v4";
+        reg = <0xf0b60000 0xfc4c>;
+        interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mdio0: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy1: ethernet-phy@1 {
+                max-speed = <1000>;
+                reg = <1>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
+
+  - |
+    ethernet@f0b80000 {
+        phy-mode = "moca";
+        fixed-link = <1 0 1000 0 0>;
+        mac-address = [ 00 10 18 36 24 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0b80000 0xfc4c>;
+        interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+        mdio1: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+        };
+    };
+
+  - |
+    ethernet@f0ba0000 {
+        phy-mode = "rgmii";
+        phy-handle = <&phy0>;
+        mac-address = [ 00 10 18 36 26 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0ba0000 0xfc4c>;
+        interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+        mdio2: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy0: ethernet-phy@0 {
+                max-speed = <1000>;
+                reg = <0>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
new file mode 100644
index 0000000000..3031395f7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc MDIO bus controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: brcm,iproc-mdio
+
+  reg:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    mdio@18002000 {
+        compatible = "brcm,iproc-mdio";
+        reg = <0x18002000 0x8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
new file mode 100644
index 0000000000..af96b4fd89
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer found in Broadcom iProc based SoCs.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs and could accept MDIO transaction compatible to C-22 or
+  C-45 Clause. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,mdio-mux-iproc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: core clock driving the MDIO block
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio_mux_iproc: mdio-mux@66020000 {
+        compatible = "brcm,mdio-mux-iproc";
+        reg = <0x66020000 0x250>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+           reg = <0x0>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy0: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@7 {
+           reg = <0x7>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy1: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@10 {
+           reg = <0x10>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           gphy0: eth-phy@10 {
+              reg = <0x10>;
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 0000000000..b40006d447
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,systemport-v1.00
+      - brcm,systemportlite-v1.00
+      - brcm,systemport
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: interrupt line for RX queues
+      - description: interrupt line for TX queues
+      - description: interrupt line for Wake-on-LAN
+
+  clocks:
+    items:
+      - description: main clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    items:
+      - const: sw_sysport
+      - const: sw_sysportwol
+
+  systemport,num-tier2-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-tier1-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-txq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW transmit queues
+
+  systemport,num-rxq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW receive queues
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f04a0000 {
+        compatible = "brcm,systemport-v1.00";
+        reg = <0xf04a0000 0x4650>;
+        local-mac-address = [ 00 11 22 33 44 55 ];
+        phy-mode = "gmii";
+        interrupts = <0x0 0x16 0x0>,
+                     <0x0 0x17 0x0>;
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
new file mode 100644
index 0000000000..6684810fcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,unimac-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom UniMAC MDIO bus controller
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-mdio-v1
+      - brcm,genet-mdio-v2
+      - brcm,genet-mdio-v3
+      - brcm,genet-mdio-v4
+      - brcm,genet-mdio-v5
+      - brcm,asp-v2.0-mdio
+      - brcm,asp-v2.1-mdio
+      - brcm,unimac-mdio
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: indirect accesses to larger than 16-bits MDIO transactions
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mdio
+      - const: mdio_indir_rw
+
+  interrupts:
+    oneOf:
+      - description: >
+          Interrupt shared with the Ethernet MAC or Ethernet switch this MDIO
+          block is integrated from
+      - items:
+          - description: |
+              "mdio done" interrupt
+          - description: |
+              "mdio error" interrupt
+
+  interrupt-names:
+    oneOf:
+      - const: mdio_done_error
+      - items:
+          - const: mdio_done
+          - const: mdio_error
+
+  clocks:
+    description: A reference to the clock supplying the MDIO bus controller
+
+  clock-frequency:
+    description: >
+      The MDIO bus clock that must be output by the MDIO bus hardware, if
+      absent, the default hardware values are used
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    mdio@403c0 {
+        compatible = "brcm,unimac-mdio";
+        reg = <0x403c0 0x8>, <0x40300 0x18>;
+        reg-names = "mdio", "mdio_indir_rw";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-ieee802.3-c22";
+            reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
new file mode 100644
index 0000000000..7c86d5e28a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
@@ -0,0 +1,29 @@
+The Broadcom BCM87XX devices are a family of 10G Ethernet PHYs.  They
+have these bindings in addition to the standard PHY bindings.
+
+Compatible: Should contain "broadcom,bcm8706" or "broadcom,bcm8727" and
+            "ethernet-phy-ieee802.3-c45"
+
+Optional Properties:
+
+- broadcom,c45-reg-init : one of more sets of 4 cells.  The first cell
+  is the MDIO Manageable Device (MMD) address, the second a register
+  address within the MMD, the third cell contains a mask to be ANDed
+  with the existing register value, and the fourth cell is ORed with
+  he result to yield the new register value.  If the third cell has a
+  value of zero, no read of the existing value is performed.
+
+Example:
+
+	ethernet-phy@5 {
+		reg = <5>;
+		compatible = "broadcom,bcm8706", "ethernet-phy-ieee802.3-c45";
+		interrupt-parent = <&gpio>;
+		interrupts = <12 8>; /* Pin 12, active low */
+		/*
+		 * Set PMD Digital Control Register for
+		 * GPIO[1] Tx/Rx
+		 * GPIO[0] R64 Sync Acquired
+		 */
+		broadcom,c45-reg-init = <1 0xc808 0xff8f 0x70>;
+	};
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
new file mode 100644
index 0000000000..cc70b00c6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Bluetooth Chips
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This binding describes Broadcom UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm20702a1
+      - brcm,bcm4329-bt
+      - brcm,bcm4330-bt
+      - brcm,bcm4334-bt
+      - brcm,bcm43430a0-bt
+      - brcm,bcm43430a1-bt
+      - brcm,bcm43438-bt
+      - brcm,bcm4345c5
+      - brcm,bcm43540-bt
+      - brcm,bcm4335a0
+      - brcm,bcm4349-bt
+      - cypress,cyw4373a0-bt
+      - infineon,cyw55572-bt
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO specifier for the line BT_REG_ON used to
+      power on the BT module
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO specifier for the line BT_RST_N used to
+      reset the BT module. This should be marked as
+      GPIO_ACTIVE_LOW.
+
+  device-wakeup-gpios:
+    maxItems: 1
+    description: GPIO specifier for the line BT_WAKE used to
+      wakeup the controller. This is using the BT_GPIO_0
+      pin on the chip when in use.
+
+  host-wakeup-gpios:
+    maxItems: 1
+    deprecated: true
+    description: GPIO specifier for the line HOST_WAKE used
+      to wakeup the host processor. This is using he BT_GPIO_1
+      pin on the chip when in use. This is deprecated and replaced
+      by interrupts and "host-wakeup" interrupt-names
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: 1 or 2 clocks as defined in clock-names below,
+      in that order
+
+  clock-names:
+    description: Names of the 1 to 2 supplied clocks
+    oneOf:
+      - const: extclk
+        deprecated: true
+        description: Deprecated in favor of txco
+
+      - const: txco
+        description: >
+          external reference clock (not a standalone crystal)
+
+      - const: lpo
+        description: >
+          external low power 32.768 kHz clock
+
+      - items:
+          - const: txco
+          - const: lpo
+
+  vbat-supply:
+    description: phandle to regulator supply for VBAT
+
+  vddio-supply:
+    description: phandle to regulator supply for VDDIO
+
+  brcm,bt-pcm-int-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 5
+    maxItems: 5
+    description: |-
+      configure PCM parameters via a 5-byte array:
+       sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S
+       pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
+       pcm-frame-type: short, long
+       pcm-sync-mode: slave, master
+       pcm-clock-mode: slave, master
+
+  brcm,requires-autobaud-mode:
+    type: boolean
+    description:
+      Set this property if autobaud mode is required. Autobaud mode is required
+      if the device's initial baud rate in normal mode is not supported by the
+      host or if the device requires autobaud mode startup before loading FW.
+
+  interrupts:
+    items:
+      - description: Handle to the line HOST_WAKE used to wake
+          up the host processor. This uses the BT_GPIO_1 pin on
+          the chip when in use.
+
+  interrupt-names:
+    items:
+      - const: host-wakeup
+
+  max-speed: true
+  current-speed: true
+
+required:
+  - compatible
+
+dependencies:
+  brcm,requires-autobaud-mode: [ shutdown-gpios ]
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - brcm,bcm20702a1
+            - brcm,bcm4329-bt
+            - brcm,bcm4330-bt
+then:
+  properties:
+    reset-gpios: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    uart {
+        uart-has-rtscts;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            max-speed = <921600>;
+            brcm,bt-pcm-int-params = [01 02 00 01 01];
+            shutdown-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>;
+            device-wakeup-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
new file mode 100644
index 0000000000..f546b1f7dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -0,0 +1,44 @@
+Generic Bluetooth controller over USB (btusb driver)
+---------------------------------------------------
+
+Required properties:
+
+  - compatible : should comply with the format "usbVID,PID" specified in
+		 Documentation/devicetree/bindings/usb/usb-device.yaml
+		 At the time of writing, the only OF supported devices
+		 (more may be added later) are:
+
+		  "usb1286,204e" (Marvell 8997)
+		  "usbcf3,e300" (Qualcomm QCA6174A)
+		  "usb4ca,301a" (Qualcomm QCA6174A (Lite-On))
+
+
+Also, vendors that use btusb may have device additional properties, e.g:
+Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
+
+Optional properties:
+
+  - interrupt-names: (see below)
+  - interrupts : The interrupt specified by the name "wakeup" is the interrupt
+		 that shall be used for out-of-band wake-on-bt. Driver will
+		 request this interrupt for wakeup. During system suspend, the
+		 irq will be enabled so that the bluetooth chip can wakeup host
+		 platform out of band. During system resume, the irq will be
+		 disabled to make sure unnecessary interrupt is not received.
+
+Example:
+
+Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
+
+&usb_host1_ehci {
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    mvl_bt1: bt@1 {
+	compatible = "usb1286,204e";
+	reg = <1>;
+	interrupt-parent = <&gpio0>;
+	interrupt-names = "wakeup";
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+    };
+};
diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
new file mode 100644
index 0000000000..c3ca26666e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank 10Gb XGMAC Ethernet controller
+
+description: |
+  The Calxeda XGMAC Ethernet controllers are directly connected to the
+  internal machine "network fabric", which is set up, initialised and
+  managed by the firmware. So there are no PHY properties in this
+  binding. Switches in the fabric take care of routing and mapping the
+  traffic to external network ports.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-xgmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      Can point to at most 3 xgmac interrupts. The 1st one is the main
+      interrupt, the 2nd one is used for power management. The optional
+      3rd one is the low power state interrupt.
+    minItems: 2
+    maxItems: 3
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@fff50000 {
+        compatible = "calxeda,hb-xgmac";
+        reg = <0xfff50000 0x1000>;
+        interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
new file mode 100644
index 0000000000..e42ea28d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/allwinner,sun4i-a10-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CAN Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: allwinner,sun7i-a20-can
+          - const: allwinner,sun4i-a10-can
+      - const: allwinner,sun4i-a10-can
+      - const: allwinner,sun8i-r40-can
+      - const: allwinner,sun20i-d1-can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      enum:
+        - allwinner,sun8i-r40-can
+        - allwinner,sun20i-d1-can
+
+then:
+  required:
+    - resets
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun7i-a20-ccu.h>
+
+    can0: can@1c2bc00 {
+        compatible = "allwinner,sun7i-a20-can",
+                     "allwinner,sun4i-a10-can";
+        reg = <0x01c2bc00 0x400>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_APB1_CAN>;
+    };
+  - |
+    #define RST_BUS_CAN		68
+    #define CLK_BUS_CAN		91
+    can1: can@1c2bc00 {
+        compatible = "allwinner,sun8i-r40-can";
+        reg = <0x01c2bc00 0x400>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CAN>;
+        resets = <&ccu RST_BUS_CAN>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
new file mode 100644
index 0000000000..218a3b3eb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -0,0 +1,15 @@
+* AT91 CAN *
+
+Required properties:
+  - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or
+    "microchip,sam9x60-can"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	can0: can@f000c000 {
+		compatible = "atmel,at91sam9x5-can";
+		reg = <0xf000c000 0x300>;
+		interrupts = <40 4 5>
+	};
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
new file mode 100644
index 0000000000..4d7d67ee17
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch C_CAN/D_CAN controller
+
+description: Bosch C_CAN/D_CAN controller for CAN bus
+
+maintainers:
+  - Dario Binacchi <dariobin@libero.it>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - bosch,c_can
+          - bosch,d_can
+          - ti,dra7-d_can
+          - ti,am3352-d_can
+      - items:
+          - enum:
+              - ti,am4372-d_can
+          - const: ti,am3352-d_can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  power-domains:
+    description: |
+      Should contain a phandle to a PM domain provider node and an args
+      specifier containing the DCAN device id value. It's mandatory for
+      Keystone 2 66AK2G SoCs only.
+    maxItems: 1
+
+  clocks:
+    description: |
+      CAN functional clock phandle.
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  syscon-raminit:
+    description: |
+      Handle to system control region that contains the RAMINIT register,
+      register offset to the RAMINIT register and the CAN instance number (0
+      offset).
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: The phandle to the system control region.
+          - description: The register offset.
+          - description: The CAN instance number.
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - bosch,d_can
+
+then:
+  properties:
+    interrupts:
+      items:
+        - description: Error and status IRQ
+        - description: Message object IRQ
+        - description: RAM ECC correctable error IRQ
+        - description: RAM ECC non-correctable error IRQ
+
+else:
+  properties:
+    interrupts:
+      items:
+        - description: Error and status IRQ
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/altr,rst-mgr.h>
+
+    can@ffc00000 {
+       compatible = "bosch,d_can";
+       reg = <0xffc00000 0x1000>;
+       interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+       clocks = <&can0_clk>;
+       resets = <&rst CAN0_RESET>;
+    };
+  - |
+    can@0 {
+        compatible = "ti,am3352-d_can";
+        reg = <0x0 0x2000>;
+        clocks = <&dcan1_fck>;
+        clock-names = "fck";
+        syscon-raminit = <&scm_conf 0x644 1>;
+        interrupts = <55>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
new file mode 100644
index 0000000000..f9ffb963d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch MCAN controller
+
+description: Bosch MCAN controller for CAN bus
+
+maintainers:
+  - Chandrasekar Ramakrishnan <rcsekar@samsung.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    const: bosch,m_can
+
+  reg:
+    items:
+      - description: M_CAN registers map
+      - description: message RAM
+
+  reg-names:
+    items:
+      - const: m_can
+      - const: message_ram
+
+  interrupts:
+    items:
+      - description: interrupt line0
+      - description: interrupt line1
+    minItems: 1
+
+  interrupt-names:
+    items:
+      - const: int0
+      - const: int1
+    minItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: cclk
+
+  bosch,mram-cfg:
+    description: |
+      Message RAM configuration data.
+      Multiple M_CAN instances can share the same Message RAM
+      and each element(e.g Rx FIFO or Tx Buffer and etc) number
+      in Message RAM is also configurable, so this property is
+      telling driver how the shared or private Message RAM are
+      used by this M_CAN controller.
+
+      The format should be as follows:
+      <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
+      The 'offset' is an address offset of the Message RAM where
+      the following elements start from. This is usually set to
+      0x0 if you're using a private Message RAM. The remain cells
+      are used to specify how many elements are used for each FIFO/Buffer.
+
+      M_CAN includes the following elements according to user manual:
+      11-bit Filter	0-128 elements / 0-128 words
+      29-bit Filter	0-64 elements / 0-128 words
+      Rx FIFO 0		0-64 elements / 0-1152 words
+      Rx FIFO 1		0-64 elements / 0-1152 words
+      Rx Buffers	0-64 elements / 0-1152 words
+      Tx Event FIFO	0-32 elements / 0-64 words
+      Tx Buffers	0-32 elements / 0-576 words
+
+      Please refer to 2.4.1 Message RAM Configuration in Bosch
+      M_CAN user manual for details.
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    items:
+      - description: The 'offset' is an address offset of the Message RAM where
+          the following elements start from. This is usually set to 0x0 if
+          you're using a private Message RAM.
+        default: 0
+      - description: 11-bit Filter 0-128 elements / 0-128 words
+        minimum: 0
+        maximum: 128
+      - description: 29-bit Filter 0-64 elements / 0-128 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 0 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 1 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx Buffers 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Tx Event FIFO 0-32 elements / 0-64 words
+        minimum: 0
+        maximum: 32
+      - description: Tx Buffers 0-32 elements / 0-576 words
+        minimum: 0
+        maximum: 32
+    minItems: 1
+
+  power-domains:
+    description:
+      Power domain provider node and an args specifier containing
+      the can device id value.
+    maxItems: 1
+
+  can-transceiver:
+    $ref: can-transceiver.yaml#
+
+  phys:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - bosch,mram-cfg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example with interrupts
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    can@20e8000 {
+      compatible = "bosch,m_can";
+      reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+      reg-names = "m_can", "message_ram";
+      interrupts = <0 114 0x04>, <0 114 0x04>;
+      interrupt-names = "int0", "int1";
+      clocks = <&clks IMX6SX_CLK_CANFD>,
+               <&clks IMX6SX_CLK_CANFD>;
+      clock-names = "hclk", "cclk";
+      bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+
+      can-transceiver {
+        max-bitrate = <5000000>;
+      };
+    };
+
+  - |
+    // Example with timer polling
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    can@20e8000 {
+      compatible = "bosch,m_can";
+      reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+      reg-names = "m_can", "message_ram";
+      clocks = <&clks IMX6SX_CLK_CANFD>,
+               <&clks IMX6SX_CLK_CANFD>;
+      clock-names = "hclk", "cclk";
+      bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+
+      can-transceiver {
+        max-bitrate = <5000000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 0000000000..217be90960
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Common Properties
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^can(@.*)?$"
+
+  termination-gpios:
+    description: GPIO pin to enable CAN bus termination.
+    maxItems: 1
+
+  termination-ohms:
+    description: The resistance value of the CAN bus termination resistor.
+    minimum: 1
+    maximum: 65535
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
new file mode 100644
index 0000000000..d422b3921f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-transceiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN transceiver
+
+description: CAN transceiver generic properties bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  max-bitrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run.
+    minimum: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/net/can/cc770.txt b/Documentation/devicetree/bindings/net/can/cc770.txt
new file mode 100644
index 0000000000..042200cf44
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/cc770.txt
@@ -0,0 +1,53 @@
+Memory mapped Bosch CC770 and Intel AN82527 CAN controller
+
+Note: The CC770 is a CAN controller from Bosch, which is 100%
+compatible with the old AN82527 from Intel, but with "bugs" being fixed.
+
+Required properties:
+
+- compatible : should be "bosch,cc770" for the CC770 and "intc,82527"
+	for the AN82527.
+
+- reg : should specify the chip select, address offset and size required
+	to map the registers of the controller. The size is usually 0x80.
+
+- interrupts : property with a value describing the interrupt source
+	(number and sensitivity) required for the controller.
+
+Optional properties:
+
+- bosch,external-clock-frequency : frequency of the external oscillator
+	clock in Hz. Note that the internal clock frequency used by the
+	controller is half of that value. If not specified, a default
+	value of 16000000 (16 MHz) is used.
+
+- bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin.
+	If not specified or if the specified value is 0, the CLKOUT pin
+	will be disabled.
+
+- bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
+	a reasonable value will be calculated.
+
+- bosch,disconnect-rx0-input : see data sheet.
+
+- bosch,disconnect-rx1-input : see data sheet.
+
+- bosch,disconnect-tx1-output : see data sheet.
+
+- bosch,polarity-dominant : see data sheet.
+
+- bosch,divide-memory-clock : see data sheet.
+
+- bosch,iso-low-speed-mux : see data sheet.
+
+For further information, please have a look to the CC770 or AN82527.
+
+Examples:
+
+can@3,100 {
+	compatible = "bosch,cc770";
+	reg = <3 0x100 0x80>;
+	interrupts = <2 0>;
+	interrupt-parent = <&mpic>;
+	bosch,external-clock-frequency = <16000000>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
new file mode 100644
index 0000000000..a009a44029
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CTU CAN FD Open-source IP Core
+
+description: |
+  Open-source CAN FD IP core developed at the Czech Technical University in Prague
+
+  The core sources and documentation on project page
+    [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
+    [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf
+
+  Integration in Xilinx Zynq SoC based system together with
+  OpenCores SJA1000 compatible controllers
+    [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
+  Martin Jerabek dimploma thesis with integration and testing
+  framework description
+    [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
+
+maintainers:
+  - Pavel Pisa <pisa@cmp.felk.cvut.cz>
+  - Ondrej Ille <ondrej.ille@gmail.com>
+  - Martin Jerabek <martin.jerabek01@gmail.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ctu,ctucanfd-2
+          - const: ctu,ctucanfd
+      - const: ctu,ctucanfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      phandle of reference clock (100 MHz is appropriate
+      for FPGA implementation on Zynq-7000 system).
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ctu_can_fd_0: can@43c30000 {
+      compatible = "ctu,ctucanfd";
+      interrupts = <0 30 4>;
+      clocks = <&clkc 15>;
+      reg = <0x43c30000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 0000000000..4162469c3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx93-flexcan
+          - fsl,imx8qm-flexcan
+          - fsl,imx8mp-flexcan
+          - fsl,imx6q-flexcan
+          - fsl,imx28-flexcan
+          - fsl,imx25-flexcan
+          - fsl,p1010-flexcan
+          - fsl,vf610-flexcan
+          - fsl,ls1021ar2-flexcan
+          - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx53-flexcan
+              - fsl,imx35-flexcan
+          - const: fsl,imx25-flexcan
+      - items:
+          - enum:
+              - fsl,imx7d-flexcan
+              - fsl,imx6ul-flexcan
+              - fsl,imx6sx-flexcan
+          - const: fsl,imx6q-flexcan
+      - items:
+          - enum:
+              - fsl,ls1028ar1-flexcan
+          - const: fsl,lx2160ar1-flexcan
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  clock-frequency:
+    description: |
+      The oscillator frequency driving the flexcan device, filled in by the
+      boot loader. This property should only be used the used operating system
+      doesn't support the clocks and clock-names property.
+
+  power-domains:
+    maxItems: 1
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This means the registers of FlexCAN controller are big endian. This is
+      optional property.i.e. if this property is not present in device tree
+      node then controller is assumed to be little endian. If this property is
+      present then controller is assumed to be big endian.
+
+  fsl,stop-mode:
+    description: |
+      Register bits of stop mode control.
+
+      The format should be as follows:
+      <gpr req_gpr req_bit>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of CAN stop request.
+      req_bit is the bit offset of CAN stop request.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+            maximum: 0xff
+          - description: The 'req_bit' is the bit offset of CAN stop request.
+            maximum: 0x1f
+
+  fsl,clk-source:
+    description: |
+      Select the clock source to the CAN Protocol Engine (PE). It's SoC
+      implementation dependent. Refer to RM for detailed definition. If this
+      property is not set in device tree node then driver selects clock source 1
+      by default.
+      0: clock source 0 (oscillator clock)
+      1: clock source 1 (peripheral clock)
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 1
+    minimum: 0
+    maximum: 1
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable CAN remote wakeup.
+
+  fsl,scu-index:
+    description: |
+      The scu index of CAN instance.
+      For SoCs with SCU support, need setup stop mode via SCU firmware, so this
+      property can help indicate a resource. It supports up to 3 CAN instances
+      now.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 0
+    maximum: 2
+
+  termination-gpios: true
+  termination-ohms: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    can@1c000 {
+        compatible = "fsl,p1010-flexcan";
+        reg = <0x1c000 0x1000>;
+        interrupts = <48 0x2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <200000000>;
+        fsl,clk-source = /bits/ 8 <0>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+        fsl,scu-index = /bits/ 8 <1>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+        termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+        termination-ohms = <120>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/grcan.txt b/Documentation/devicetree/bindings/net/can/grcan.txt
new file mode 100644
index 0000000000..34ef3498f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/grcan.txt
@@ -0,0 +1,28 @@
+Aeroflex Gaisler GRCAN and GRHCAN CAN controllers.
+
+The GRCAN and CRHCAN CAN controllers are available in the GRLIB VHDL IP core
+library.
+
+Note: These properties are built from the AMBA plug&play in a Leon SPARC system
+(the ordinary environment for GRCAN and GRHCAN). There are no dts files for
+sparc.
+
+Required properties:
+
+- name : Should be "GAISLER_GRCAN", "01_03d", "GAISLER_GRHCAN" or "01_034"
+
+- reg : Address and length of the register set for the device
+
+- freq : Frequency of the external oscillator clock in Hz (the frequency of
+	the amba bus in the ordinary case)
+
+- interrupts : Interrupt number for this device
+
+Optional properties:
+
+- systemid : If not present or if the value of the least significant 16 bits
+	of this 32-bit property is smaller than GRCAN_TXBUG_SAFE_GRLIB_VERSION
+	a bug workaround is activated.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
new file mode 100644
index 0000000000..3a9926f999
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@@ -0,0 +1,23 @@
+* Holt HI-311X stand-alone CAN controller device tree bindings
+
+Required properties:
+ - compatible: Should be one of the following:
+   - "holt,hi3110" for HI-3110
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+
+Example:
+	can0: can@1 {
+		compatible = "holt,hi3110";
+		reg = <1>;
+		clocks = <&clk32m>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&reg5v0>;
+		xceiver-supply = <&reg5v0>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/ifi_canfd.txt b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
new file mode 100644
index 0000000000..20ea5c70ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
@@ -0,0 +1,15 @@
+IFI CANFD controller
+--------------------
+
+Required properties:
+  - compatible: Should be "ifi,canfd-1.0"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	canfd0: canfd@ff220000 {
+		compatible = "ifi,canfd-1.0";
+		reg = <0xff220000 0x00001000>;
+		interrupts = <0 43 0>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
new file mode 100644
index 0000000000..381f8fb3e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -0,0 +1,30 @@
+* Microchip MCP251X stand-alone CAN controller device tree bindings
+
+Required properties:
+ - compatible: Should be one of the following:
+   - "microchip,mcp2510" for MCP2510.
+   - "microchip,mcp2515" for MCP2515.
+   - "microchip,mcp25625" for MCP25625.
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+ - gpio-controller: Indicates this device is a GPIO controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+                the second cell is used to specify the gpio polarity.
+
+Example:
+	can0: can@1 {
+		compatible = "microchip,mcp2515";
+		reg = <1>;
+		clocks = <&clk24m>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg5v0>;
+		xceiver-supply = <&reg5v0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
new file mode 100644
index 0000000000..2a98b26630
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN controller
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - microchip,mcp2517fd
+          - microchip,mcp2518fd
+          - microchip,mcp251xfd
+      - items:
+          - enum:
+              - microchip,mcp251863
+          - const: microchip,mcp2518fd
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that powers the CAN controller.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  microchip,rx-int-gpios:
+    description:
+      GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which
+      signals a pending RX interrupt.
+    maxItems: 1
+
+  spi-max-frequency:
+    description:
+      Must be half or less of "clocks" frequency.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        can@0 {
+            compatible = "microchip,mcp251xfd";
+            reg = <0>;
+            clocks = <&can0_osc>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&can0_pins>;
+            spi-max-frequency = <20000000>;
+            interrupts-extended = <&gpio 13 IRQ_TYPE_LEVEL_LOW>;
+            microchip,rx-int-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg5v0>;
+            xceiver-supply = <&reg5v0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
new file mode 100644
index 0000000000..45aa3de7cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip PolarFire SoC (MPFS) can controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,mpfs-can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    can@2010c000 {
+        compatible = "microchip,mpfs-can";
+        reg = <0x2010c000 0x1000>;
+        clocks = <&clkcfg 17>;
+        interrupt-parent = <&plic>;
+        interrupts = <56>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt
new file mode 100644
index 0000000000..2fa4fcd38f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				 "ref" for reference clock (XTAL)
+			   "ref" is default in case this property is not
+			   present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				"ref" for reference clock
+				"sys" for system clock
+			   If this property is not present, an optimal CAN
+			   clock source and frequency based on the system
+			   clock will be selected. If this is not possible,
+			   the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+			   clock divider can be specified. By default, a
+			   value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+	can@1300 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <12 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1300 0x80>;
+	};
+
+	can@1380 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <13 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1380 0x80>;
+		fsl,mscan-clock-source = "ref";
+		fsl,mscan-clock-divider = <3>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
new file mode 100644
index 0000000000..144a378513
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+maintainers:
+  - Wolfgang Grandegger <wg@grandegger.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,sja1000
+          - technologic,sja1000
+      - items:
+          - enum:
+              - renesas,r9a06g032-sja1000 # RZ/N1D
+              - renesas,r9a06g033-sja1000 # RZ/N1S
+          - const: renesas,rzn1-sja1000 # RZ/N1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg-io-width:
+    description: I/O register width (in bytes) implemented by this device
+    default: 1
+    enum: [ 1, 2, 4 ]
+
+  nxp,external-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16000000
+    description: |
+      Frequency of the external oscillator clock in Hz.
+      The internal clock frequency used by the SJA1000 is half of that value.
+
+  nxp,tx-output-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 1
+    description: |
+      operation mode of the TX output control logic. Valid values are:
+        <0> : bi-phase output mode
+        <1> : normal output mode (default)
+        <2> : test output mode
+        <3> : clock output mode
+
+  nxp,tx-output-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x02
+    description: |
+      TX output pin configuration. Valid values are any one of the below
+      or combination of TX0 and TX1:
+        <0x01> : TX0 invert
+        <0x02> : TX0 pull-down (default)
+        <0x04> : TX0 pull-up
+        <0x06> : TX0 push-pull
+        <0x08> : TX1 invert
+        <0x10> : TX1 pull-down
+        <0x20> : TX1 pull-up
+        <0x30> : TX1 push-pull
+
+  nxp,clock-out-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      clock frequency in Hz on the CLKOUT pin.
+      If not specified or if the specified value is 0, the CLKOUT pin
+      will be disabled.
+
+  nxp,no-comparator-bypass:
+    type: boolean
+    description: Allows to disable the CAN input comparator.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - technologic,sja1000
+              - renesas,rzn1-sja1000
+    then:
+      required:
+        - reg-io-width
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzn1-sja1000
+    then:
+      required:
+        - clocks
+        - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    can@1a000 {
+        compatible = "technologic,sja1000";
+        reg = <0x1a000 0x100>;
+        interrupts = <1>;
+        reg-io-width = <2>;
+        nxp,tx-output-config = <0x06>;
+        nxp,external-clock-frequency = <24000000>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    can@52104000 {
+        compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+        reg = <0x52104000 0x800>;
+        reg-io-width = <4>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+        power-domains = <&sysctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml
new file mode 100644
index 0000000000..fadc871fd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-can.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN Controller
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,can-r8a7778      # R-Car M1-A
+              - renesas,can-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-can # R-Car Gen1
+
+      - items:
+          - enum:
+              - renesas,can-r8a7742      # RZ/G1H
+              - renesas,can-r8a7743      # RZ/G1M
+              - renesas,can-r8a7744      # RZ/G1N
+              - renesas,can-r8a7745      # RZ/G1E
+              - renesas,can-r8a77470     # RZ/G1C
+              - renesas,can-r8a7790      # R-Car H2
+              - renesas,can-r8a7791      # R-Car M2-W
+              - renesas,can-r8a7792      # R-Car V2H
+              - renesas,can-r8a7793      # R-Car M2-N
+              - renesas,can-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-can # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,can-r8a774a1     # RZ/G2M
+              - renesas,can-r8a774b1     # RZ/G2N
+              - renesas,can-r8a774c0     # RZ/G2E
+              - renesas,can-r8a774e1     # RZ/G2H
+              - renesas,can-r8a7795      # R-Car H3
+              - renesas,can-r8a7796      # R-Car M3-W
+              - renesas,can-r8a77961     # R-Car M3-W+
+              - renesas,can-r8a77965     # R-Car M3-N
+              - renesas,can-r8a77990     # R-Car E3
+              - renesas,can-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-can # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: clkp1
+      - const: clkp2
+      - const: can_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,can-clock-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 3 ]
+    default: 0
+    description: |
+      R-Car CAN Clock Source Select.  Valid values are:
+        <0x0> (default) : Peripheral clock (clkp1)
+        <0x1> : Peripheral clock (clkp2)
+        <0x3> : External input clock
+
+  assigned-clocks:
+    description:
+      Reference to the clkp2 (CANFD) clock.
+      On R-Car Gen3 and RZ/G2 SoCs, "clkp2" is the CANFD clock.  This is a div6
+      clock and can be used by both CAN and CAN FD controllers at the same
+      time.  It needs to be scaled to maximum frequency if any of these
+      controllers use it.
+
+  assigned-clock-rates:
+    description: Maximum frequency of the CANFD clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,rcar-gen1-can
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar-gen3-can
+    then:
+      required:
+        - assigned-clocks
+        - assigned-clock-rates
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    can0: can@e6e80000 {
+            compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
+            reg = <0xe6e80000 0x1000>;
+            interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 916>,
+                     <&cpg CPG_CORE R8A7791_CLK_RCAN>, <&can_clk>;
+            clock-names = "clkp1", "clkp2", "can_clk";
+            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+            resets = <&cpg 916>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
new file mode 100644
index 0000000000..d3f45d29fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/renesas,rcar-canfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car CAN FD Controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-canfd     # RZ/G2M
+              - renesas,r8a774b1-canfd     # RZ/G2N
+              - renesas,r8a774c0-canfd     # RZ/G2E
+              - renesas,r8a774e1-canfd     # RZ/G2H
+              - renesas,r8a7795-canfd      # R-Car H3
+              - renesas,r8a7796-canfd      # R-Car M3-W
+              - renesas,r8a77961-canfd     # R-Car M3-W+
+              - renesas,r8a77965-canfd     # R-Car M3-N
+              - renesas,r8a77970-canfd     # R-Car V3M
+              - renesas,r8a77980-canfd     # R-Car V3H
+              - renesas,r8a77990-canfd     # R-Car E3
+              - renesas,r8a77995-canfd     # R-Car D3
+          - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-canfd     # R-Car V3U
+              - renesas,r8a779g0-canfd     # R-Car V4H
+          - const: renesas,rcar-gen4-canfd # R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-canfd    # RZ/G2UL and RZ/Five
+              - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
+              - renesas,r9a07g054-canfd    # RZ/V2L
+          - const: renesas,rzg2l-canfd     # RZ/G2L family
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: fck
+      - const: canfd
+      - const: can_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets: true
+
+  renesas,no-can-fd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The controller can operate in either CAN FD only mode (default) or
+      Classical CAN only mode.  The mode is global to all channels.
+      Specify this property to put the controller in Classical CAN only mode.
+
+  assigned-clocks:
+    description:
+      Reference to the CANFD clock.  The CANFD clock is a div6 clock and can be
+      used by both CAN (if present) and CAN FD controllers at the same time.
+      It needs to be scaled to maximum frequency if any of these controllers
+      use it.
+
+  assigned-clock-rates:
+    description: Maximum frequency of the CANFD clock.
+
+patternProperties:
+  "^channel[0-7]$":
+    type: object
+    description:
+      The controller supports multiple channels and each is represented as a
+      child node.  Each channel can be enabled/disabled individually.
+
+    properties:
+      phys:
+        maxItems: 1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - assigned-clocks
+  - assigned-clock-rates
+  - channel0
+  - channel1
+
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-canfd
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CAN global error interrupt
+            - description: CAN receive FIFO interrupt
+            - description: CAN0 error interrupt
+            - description: CAN0 transmit interrupt
+            - description: CAN0 transmit/receive FIFO receive completion interrupt
+            - description: CAN1 error interrupt
+            - description: CAN1 transmit interrupt
+            - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+        interrupt-names:
+          items:
+            - const: g_err
+            - const: g_recc
+            - const: ch0_err
+            - const: ch0_rec
+            - const: ch0_trx
+            - const: ch1_err
+            - const: ch1_rec
+            - const: ch1_trx
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: rstp_n
+            - const: rstc_n
+
+      required:
+        - reset-names
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Channel interrupt
+            - description: Global interrupt
+
+        interrupt-names:
+          items:
+            - const: ch_int
+            - const: g_int
+
+        resets:
+          maxItems: 1
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,rcar-gen4-canfd
+    then:
+      patternProperties:
+        "^channel[2-7]$": false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    canfd: can@e66c0000 {
+            compatible = "renesas,r8a7795-canfd",
+                         "renesas,rcar-gen3-canfd";
+            reg = <0xe66c0000 0x8000>;
+            interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch_int", "g_int";
+            clocks = <&cpg CPG_MOD 914>,
+                     <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+                     <&can_clk>;
+            clock-names = "fck", "canfd", "can_clk";
+            assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+            assigned-clock-rates = <40000000>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 914>;
+
+            channel0 {
+            };
+
+            channel1 {
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
new file mode 100644
index 0000000000..de1d429889
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics bxCAN controller
+
+description: STMicroelectronics BxCAN controller for CAN bus
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-bxcan
+
+  st,can-primary:
+    description:
+      Primary mode of the bxCAN peripheral is only relevant if the chip has
+      two CAN peripherals in dual CAN configuration. In that case they share
+      some of the required logic.
+      Not to be used if the peripheral is in single CAN configuration.
+      To avoid misunderstandings, it should be noted that ST documentation
+      uses the terms master instead of primary.
+    type: boolean
+
+  st,can-secondary:
+    description:
+      Secondary mode of the bxCAN peripheral is only relevant if the chip
+      has two CAN peripherals in dual CAN configuration. In that case they
+      share some of the required logic.
+      Not to be used if the peripheral is in single CAN configuration.
+      To avoid misunderstandings, it should be noted that ST documentation
+      uses the terms slave instead of secondary.
+    type: boolean
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: transmit interrupt
+      - description: FIFO 0 receive interrupt
+      - description: FIFO 1 receive interrupt
+      - description: status change error interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx0
+      - const: rx1
+      - const: sce
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  st,gcan:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The phandle to the gcan node which allows to access the 512-bytes
+      SRAM memory shared by the two bxCAN cells (CAN1 primary and CAN2
+      secondary) in dual CAN peripheral configuration.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - clocks
+  - st,gcan
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+
+    can1: can@40006400 {
+        compatible = "st,stm32f4-bxcan";
+        reg = <0x40006400 0x200>;
+        interrupts = <19>, <20>, <21>, <22>;
+        interrupt-names = "tx", "rx0", "rx1", "sce";
+        resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+        clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+        st,can-primary;
+        st,gcan = <&gcan>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
new file mode 100644
index 0000000000..170e23f061
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -0,0 +1,45 @@
+Texas Instruments TCAN4x5x CAN Controller
+================================================
+
+This file provides device node information for the TCAN4x5x interface contains.
+
+Required properties:
+	- compatible:
+		"ti,tcan4552", "ti,tcan4x5x"
+		"ti,tcan4553", "ti,tcan4x5x" or
+		"ti,tcan4x5x"
+	- reg: 0
+	- #address-cells: 1
+	- #size-cells: 0
+	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
+			     operate at should be less than or equal to 18 MHz.
+	- interrupt-parent: the phandle to the interrupt controller which provides
+                    the interrupt.
+	- interrupts: interrupt specification for data-ready.
+
+See Documentation/devicetree/bindings/net/can/bosch,m_can.yaml for additional
+required property details.
+
+Optional properties:
+	- reset-gpios: Hardwired output GPIO. If not defined then software
+		       reset.
+	- device-state-gpios: Input GPIO that indicates if the device is in
+			      a sleep state or if the device is active. Not
+			      available with tcan4552/4553.
+	- device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
+			     available with tcan4552/4553.
+
+Example:
+tcan4x5x: tcan4x5x@0 {
+		compatible = "ti,tcan4x5x";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/net/can/ti_hecc.txt b/Documentation/devicetree/bindings/net/can/ti_hecc.txt
new file mode 100644
index 0000000000..e0f0a7cfe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ti_hecc.txt
@@ -0,0 +1,32 @@
+Texas Instruments High End CAN Controller (HECC)
+================================================
+
+This file provides information, what the device node
+for the hecc interface contains.
+
+Required properties:
+- compatible: "ti,am3517-hecc"
+- reg: addresses and lengths of the register spaces for 'hecc', 'hecc-ram'
+       and 'mbx'
+- reg-names :"hecc", "hecc-ram", "mbx"
+- interrupts: interrupt mapping for the hecc interrupts sources
+- clocks: clock phandles (see clock bindings for details)
+
+Optional properties:
+- ti,use-hecc1int: if provided configures HECC to produce all interrupts
+		   on HECC1INT interrupt line. By default HECC0INT interrupt
+		   line will be used.
+- xceiver-supply: regulator that powers the CAN transceiver
+
+Example:
+
+For am3517evm board:
+	hecc: can@5c050000 {
+		compatible = "ti,am3517-hecc";
+		reg = <0x5c050000 0x80>,
+		      <0x5c053000 0x180>,
+		      <0x5c052000 0x200>;
+		reg-names = "hecc", "hecc-ram", "mbx";
+		interrupts = <24>;
+		clocks = <&hecc_ck>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
new file mode 100644
index 0000000000..64d57c343e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Xilinx Axi CAN/Zynq CANPS controller
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-can-1.0
+      - xlnx,axi-can-1.00.a
+      - xlnx,canfd-1.0
+      - xlnx,canfd-2.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CAN Tx fifo depth (Zynq, Axi CAN).
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
+
+  tx-mailbox-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CAN Tx mailbox buffer count (CAN FD)
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynq-can-1.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: pclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,axi-can-1.00.a
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,canfd-1.0
+              - xlnx,canfd-2.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-mailbox-count
+        - rx-fifo-depth
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    can@e0008000 {
+        compatible = "xlnx,zynq-can-1.0";
+        reg = <0xe0008000 0x1000>;
+        clocks = <&clkc 19>, <&clkc 36>;
+        clock-names = "can_clk", "pclk";
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&intc>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,axi-can-1.00.a";
+        reg = <0x40000000 0x10000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,canfd-1.0";
+        reg = <0x40000000 0x2000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x20>;
+    };
+
+  - |
+    can@ff060000 {
+        compatible = "xlnx,canfd-2.0";
+        reg = <0xff060000 0x6000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x40>;
+    };
diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
new file mode 100644
index 0000000000..020df08b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -0,0 +1,84 @@
+* System Management Interface (SMI) / MDIO
+
+Properties:
+- compatible: One of:
+
+   "cavium,octeon-3860-mdio": Compatibility with all cn3XXX, cn5XXX
+                       and cn6XXX SOCs.
+
+   "cavium,thunder-8890-mdio": Compatibility with all cn8XXX SOCs.
+
+- reg: The base address of the MDIO bus controller register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>.  MDIO addresses have no size component.
+
+Typically an MDIO bus might have several children.
+
+Example:
+	mdio@1180000001800 {
+		compatible = "cavium,octeon-3860-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11800 0x00001800 0x0 0x40>;
+
+		ethernet-phy@0 {
+			...
+			reg = <0>;
+		};
+	};
+
+
+* System Management Interface (SMI) / MDIO Nexus
+
+  Several mdio buses may be gathered as children of a single PCI
+  device, this PCI device is the nexus of the buses.
+
+Properties:
+
+- compatible: "cavium,thunder-8890-mdio-nexus";
+
+- reg: The PCI device and function numbers of the nexus device.
+
+- #address-cells: Must be <2>.
+
+- #size-cells: Must be <2>.
+
+- ranges: As needed for mapping of the MDIO bus device registers.
+
+- assigned-addresses: As needed for mapping of the MDIO bus device registers.
+
+Example:
+
+        mdio-nexus@1,3 {
+                compatible = "cavium,thunder-8890-mdio-nexus";
+                #address-cells = <2>;
+                #size-cells = <2>;
+                reg = <0x0b00 0 0 0 0>; /* DEVFN = 0x0b (1:3) */
+                assigned-addresses = <0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+                ranges = <0x87e0 0x05000000 0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+
+                mdio0@87e0,05003800 {
+                        compatible = "cavium,thunder-8890-mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x87e0 0x05003800 0x0 0x30>;
+
+                        ethernet-phy@0 {
+                                ...
+                                reg = <0>;
+                        };
+                };
+                mdio0@87e0,05003880 {
+                        compatible = "cavium,thunder-8890-mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x87e0 0x05003880 0x0 0x30>;
+
+                        ethernet-phy@0 {
+                                ...
+                                reg = <0>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/net/cavium-mix.txt b/Documentation/devicetree/bindings/net/cavium-mix.txt
new file mode 100644
index 0000000000..8d7c309639
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-mix.txt
@@ -0,0 +1,34 @@
+* MIX Ethernet controller.
+
+Properties:
+- compatible: "cavium,octeon-5750-mix"
+
+  Compatibility with all cn5XXX and cn6XXX SOCs populated with MIX
+  devices.
+
+- reg: The base addresses of four separate register banks.  The first
+  bank contains the MIX registers.  The second bank the corresponding
+  AGL registers.  The third bank are the AGL registers shared by all
+  MIX devices present.  The fourth bank is the AGL_PRT_CTL shared by
+  all MIX devices present.
+
+- cell-index: A single cell specifying which portion of the shared
+  register banks corresponds to this MIX device.
+
+- interrupts: Two interrupt specifiers.  The first is the MIX
+  interrupt routing and the second the routing for the AGL interrupts.
+
+- phy-handle: Optional, see ethernet.txt file in the same directory.
+
+Example:
+	ethernet@1070000100800 {
+		compatible = "cavium,octeon-5750-mix";
+		reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+		      <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+		      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
+		      <0x11800 0xE0002008 0x0 0x8>;   /* AGL_PRT_CTL */
+		cell-index = <1>;
+		interrupts = <1 18>, < 1 46>;
+		local-mac-address = [ 00 0f b7 10 63 54 ];
+		phy-handle = <&phy1>;
+	};
diff --git a/Documentation/devicetree/bindings/net/cavium-pip.txt b/Documentation/devicetree/bindings/net/cavium-pip.txt
new file mode 100644
index 0000000000..e3b8fe7176
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cavium-pip.txt
@@ -0,0 +1,99 @@
+* PIP Ethernet nexus.
+
+The PIP Ethernet nexus can control several data packet input/output
+devices.  The devices have a two level grouping scheme.  There may be
+several interfaces, and each interface may have several ports.  These
+ports might be an individual Ethernet PHY.
+
+
+Properties for the PIP nexus:
+- compatible: "cavium,octeon-3860-pip"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the PIP's register bank.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>.
+
+Properties for PIP interfaces which is a child the PIP nexus:
+- compatible: "cavium,octeon-3860-pip-interface"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The interface number.
+
+- #address-cells: Must be <1>.
+
+- #size-cells: Must be <0>.
+
+Properties for PIP port which is a child the PIP interface:
+- compatible: "cavium,octeon-3860-pip-port"
+
+  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The port number within the interface group.
+
+- phy-handle: Optional, see ethernet.txt file in the same directory.
+
+- rx-delay: Delay value for RGMII receive clock. Optional. Disabled if 0.
+  Value range is 1-31, and mapping to the actual delay varies depending on HW.
+
+- tx-delay: Delay value for RGMII transmit clock. Optional. Disabled if 0.
+  Value range is 1-31, and mapping to the actual delay varies depending on HW.
+
+Example:
+
+	pip@11800a0000000 {
+		compatible = "cavium,octeon-3860-pip";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+		interface@0 {
+			compatible = "cavium,octeon-3860-pip-interface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>; /* interface */
+
+			ethernet@0 {
+				compatible = "cavium,octeon-3860-pip-port";
+				reg = <0x0>; /* Port */
+				local-mac-address = [ 00 0f b7 10 63 60 ];
+				phy-handle = <&phy2>;
+			};
+			ethernet@1 {
+				compatible = "cavium,octeon-3860-pip-port";
+				reg = <0x1>; /* Port */
+				local-mac-address = [ 00 0f b7 10 63 61 ];
+				phy-handle = <&phy3>;
+			};
+			ethernet@2 {
+				compatible = "cavium,octeon-3860-pip-port";
+				reg = <0x2>; /* Port */
+				local-mac-address = [ 00 0f b7 10 63 62 ];
+				phy-handle = <&phy4>;
+			};
+			ethernet@3 {
+				compatible = "cavium,octeon-3860-pip-port";
+				reg = <0x3>; /* Port */
+				local-mac-address = [ 00 0f b7 10 63 63 ];
+				phy-handle = <&phy5>;
+			};
+		};
+
+		interface@1 {
+			compatible = "cavium,octeon-3860-pip-interface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>; /* interface */
+
+			ethernet@0 {
+				compatible = "cavium,octeon-3860-pip-port";
+				reg = <0x0>; /* Port */
+				local-mac-address = [ 00 0f b7 10 63 64 ];
+				phy-handle = <&phy6>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
new file mode 100644
index 0000000000..bf8894a025
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MACB/GEM Ethernet controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cdns,at91rm9200-emac  # Atmel at91rm9200 SoC
+          - const: cdns,emac          # Generic
+
+      - items:
+          - enum:
+              - cdns,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - cdns,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+        deprecated: true
+
+      - items:
+          - enum:
+              - xlnx,versal-gem       # Xilinx Versal
+              - xlnx,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - xlnx,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+
+      - items:
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs
+              - cdns,sam9x60-macb     # Microchip sam9x60 SoC
+              - microchip,mpfs-macb   # Microchip PolarFire SoC
+          - const: cdns,macb          # Generic
+
+      - items:
+          - enum:
+              - atmel,sama5d3-macb    # 10/100Mbit IP on Atmel sama5d3 SoCs
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
+          - const: cdns,macb          # Generic
+
+      - enum:
+          - atmel,sama5d29-gem        # GEM XL IP (10/100) on Atmel sama5d29 SoCs
+          - atmel,sama5d2-gem         # GEM IP (10/100) on Atmel sama5d2 SoCs
+          - atmel,sama5d3-gem         # Gigabit IP on Atmel sama5d3 SoCs
+          - atmel,sama5d4-gem         # GEM IP (10/100) on Atmel sama5d4 SoCs
+          - cdns,np4-macb             # NP4 SoC devices
+          - microchip,sama7g5-emac    # Microchip SAMA7G5 ethernet interface
+          - microchip,sama7g5-gem     # Microchip SAMA7G5 gigabit ethernet interface
+          - sifive,fu540-c000-gem     # SiFive FU540-C000 SoC
+          - cdns,emac                 # Generic
+          - cdns,gem                  # Generic
+          - cdns,macb                 # Generic
+
+  reg:
+    minItems: 1
+    items:
+      - description: Basic register set
+      - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: One interrupt per available hardware queue
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    items:
+      - enum: [ ether_clk, hclk, pclk ]
+      - enum: [ hclk, pclk ]
+      - const: tx_clk
+      - enum: [ rx_clk, tsu_clk ]
+      - const: tsu_clk
+
+  local-mac-address: true
+
+  phy-mode: true
+
+  phy-handle: true
+
+  phys:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Recommended with ZynqMP, specify reset control for this
+      controller instance with zynqmp-reset driver.
+
+  reset-names:
+    maxItems: 1
+
+  fixed-link: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  cdns,rx-watermark:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the receive partial store and forward mode is activated,
+      the receiver will only begin to forward the packet to the external
+      AHB or AXI slave when enough packet data is stored in the SRAM packet buffer.
+      rx-watermark corresponds to the number of SRAM buffer locations,
+      that need to be filled, before the forwarding process is activated.
+      Width of the SRAM is platform dependent, and can be 4, 8 or 16 bytes.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  mdio:
+    type: object
+    description:
+      Node containing PHY children. If this node is not present, then PHYs will
+      be direct children.
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      reset-gpios: true
+
+      magic-packet:
+        type: boolean
+        description:
+          Indicates that the hardware supports waking up via magic packet.
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: sifive,fu540-c000-gem
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    macb0: ethernet@fffc4000 {
+            compatible = "cdns,macb";
+            reg = <0xfffc4000 0x4000>;
+            interrupts = <21>;
+            cdns,rx-watermark = <0x44>;
+            phy-mode = "rmii";
+            local-mac-address = [3a 0e 03 04 05 06];
+            clock-names = "pclk", "hclk", "tx_clk";
+            clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                    reg = <0x1>;
+                    reset-gpios = <&pioE 6 1>;
+            };
+    };
+
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            gem1: ethernet@ff0c0000 {
+                    compatible = "xlnx,zynqmp-gem", "cdns,gem";
+                    interrupt-parent = <&gic>;
+                    interrupts = <0 59 4>, <0 59 4>;
+                    reg = <0x0 0xff0c0000 0x0 0x1000>;
+                    clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+                             <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+                             <&zynqmp_clk GEM_TSU>;
+                    clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    iommus = <&smmu 0x875>;
+                    power-domains = <&zynqmp_firmware PD_ETH_1>;
+                    resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+                    reset-names = "gem1_rst";
+                    phy-mode = "sgmii";
+                    phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
+                    fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/cirrus,cs89x0.txt b/Documentation/devicetree/bindings/net/cirrus,cs89x0.txt
new file mode 100644
index 0000000000..c070076bac
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cirrus,cs89x0.txt
@@ -0,0 +1,13 @@
+* Cirrus Logic CS8900/CS8920 Network Controller
+
+Required properties:
+- compatible	: Should be "cirrus,cs8900" or "cirrus,cs8920".
+- reg		: Address and length of the IO space.
+- interrupts	: Should contain the controller interrupt line.
+
+Examples:
+	eth0: eth@10000000 {
+		compatible = "cirrus,cs8900";
+		reg = <0x10000000 0x400>;
+		interrupts = <10>;
+	};
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
new file mode 100644
index 0000000000..44fd23a5fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini Ethernet Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This ethernet controller is found in the Gemini SoC family:
+  StorLink SL3512 and SL3516, also known as Cortina Systems
+  CS3512 and CS3516.
+
+properties:
+  compatible:
+    const: cortina,gemini-ethernet
+
+  reg:
+    minItems: 3
+    description: must contain the global registers and the V-bit and A-bit
+      memory areas, in total three register sets.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+# The subnodes represents the two ethernet ports in this device.
+# They are not independent of each other since they share resources
+# in the parent node, and are thus children.
+patternProperties:
+  "^ethernet-port@[0-9]+$":
+    type: object
+    unevaluatedProperties: false
+    description: contains the resources for ethernet port
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    properties:
+      compatible:
+        const: cortina,gemini-ethernet-port
+
+      reg:
+        items:
+          - description: DMA/TOE memory
+          - description: GMAC memory area of the port
+
+      interrupts:
+        maxItems: 1
+        description: should contain the interrupt line of the port.
+                     this is nominally a level interrupt active high.
+
+      resets:
+        maxItems: 1
+        description: this must provide an SoC-integrated reset line for the port.
+
+      clocks:
+        maxItems: 1
+        description: this should contain a handle to the PCLK clock for
+                     clocking the silicon in this port
+
+      clock-names:
+        const: PCLK
+
+    required:
+      - reg
+      - compatible
+      - interrupts
+      - resets
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    mdio0: mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      phy0: ethernet-phy@1 {
+        reg = <1>;
+        device_type = "ethernet-phy";
+      };
+      phy1: ethernet-phy@3 {
+        reg = <3>;
+        device_type = "ethernet-phy";
+      };
+    };
+
+
+    ethernet@60000000 {
+        compatible = "cortina,gemini-ethernet";
+        reg = <0x60000000 0x4000>, /* Global registers, queue */
+              <0x60004000 0x2000>, /* V-bit */
+              <0x60006000 0x2000>; /* A-bit */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        gmac0: ethernet-port@0 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                      <0x6000a000 0x2000>; /* Port 0 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC0>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy0>;
+        };
+
+        gmac1: ethernet-port@1 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                      <0x6000e000 0x2000>; /* Port 1 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC1>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/cortina.txt b/Documentation/devicetree/bindings/net/cortina.txt
new file mode 100644
index 0000000000..40d0bd9841
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina.txt
@@ -0,0 +1,21 @@
+Cortina Phy Driver Device Tree Bindings
+---------------------------------------
+
+CORTINA is a registered trademark of Cortina Systems, Inc.
+
+The driver supports the Cortina Electronic Dispersion Compensation (EDC)
+devices, equipped with clock and data recovery (CDR) circuits. These
+devices make use of registers that are not compatible with Clause 45 or
+Clause 22, therefore they need to be described using the
+"ethernet-phy-id" compatible.
+
+Since the driver only implements  polling mode support, interrupts info
+can be skipped.
+
+Example (CS4340 phy):
+	mdio {
+		cs4340_phy@10 {
+			compatible = "ethernet-phy-id13e5.1002";
+			reg = <0x10>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
new file mode 100644
index 0000000000..5d76f991c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt
@@ -0,0 +1,30 @@
+TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED)
+-----------------------------------------------
+
+Required properties:
+- compatible		: Should be "ti,am3352-cpsw-phy-sel" for am335x platform and
+			  "ti,dra7xx-cpsw-phy-sel" for dra7xx platform
+			  "ti,am43xx-cpsw-phy-sel" for am43xx platform
+- reg			: physical base address and size of the cpsw
+			  registers map
+- reg-names		: names of the register map given in "reg" node
+
+Optional properties:
+-rmii-clock-ext		: If present, the driver will configure the RMII
+			  interface to external clock usage
+
+Examples:
+
+	phy_sel: cpsw-phy-sel@44e10650 {
+		compatible = "ti,am3352-cpsw-phy-sel";
+		reg= <0x44e10650 0x4>;
+		reg-names = "gmii-sel";
+	};
+
+(or)
+	phy_sel: cpsw-phy-sel@44e10650 {
+		compatible = "ti,am3352-cpsw-phy-sel";
+		reg= <0x44e10650 0x4>;
+		reg-names = "gmii-sel";
+		rmii-clock-ext;
+	};
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
new file mode 100644
index 0000000000..ef655f386b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -0,0 +1,132 @@
+TI SoC Ethernet Switch Controller Device Tree Bindings
+------------------------------------------------------
+
+Required properties:
+- compatible		: Should be one of the below:-
+			  "ti,cpsw" for backward compatible
+			  "ti,am335x-cpsw" for AM335x controllers
+			  "ti,am4372-cpsw" for AM437x controllers
+			  "ti,dra7-cpsw" for DRA7x controllers
+- reg			: physical base address and size of the cpsw
+			  registers map
+- interrupts		: property with a value describing the interrupt
+			  number
+- cpdma_channels 	: Specifies number of channels in CPDMA
+- ale_entries		: Specifies No of entries ALE can hold
+- bd_ram_size		: Specifies internal descriptor RAM size
+- mac_control		: Specifies Default MAC control register content
+			  for the specific platform
+- slaves		: Specifies number for slaves
+- active_slave		: Specifies the slave to use for time stamping,
+			  ethtool and SIOCGMIIPHY
+- cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
+			  device. See also cpsw-phy-sel.txt for its binding.
+			  Note that in legacy cases cpsw-phy-sel may be
+			  a child device instead of a phandle
+			  (DEPRECATED, use phys property instead).
+
+Optional properties:
+- ti,hwmods		: Must be "cpgmac0"
+- dual_emac		: Specifies Switch to act as Dual EMAC
+- syscon		: Phandle to the system control device node, which is
+			  the control module device of the am33x
+- mode-gpios		: Should be added if one/multiple gpio lines are
+			  required to be driven so that cpsw data lines
+			  can be connected to the phy via selective mux.
+			  For example in dra72x-evm, pcf gpio has to be
+			  driven low so that cpsw slave 0 and phy data
+			  lines are connected via mux.
+- cpts_clock_mult	: Numerator to convert input clock ticks into nanoseconds
+- cpts_clock_shift	: Denominator to convert input clock ticks into nanoseconds
+			  Mult and shift will be calculated basing on CPTS
+			  rftclk frequency if both cpts_clock_shift and
+			  cpts_clock_mult properties are not provided.
+
+Slave Properties:
+Required properties:
+- phy-mode		: See ethernet.txt file in the same directory
+- phys			: phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt)
+
+Optional properties:
+- dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
+- phy_id		: Specifies slave phy id (deprecated, use phy-handle)
+- phy-handle		: See ethernet.txt file in the same directory
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Slave sub-nodes:
+- fixed-link		: See fixed-link.txt file in the same directory
+
+Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified.
+
+Note: "ti,hwmods" field is used to fetch the base address and irq
+resources from TI, omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples:
+
+	mac: ethernet@4a100000 {
+		compatible = "ti,cpsw";
+		reg = <0x4A100000 0x1000>;
+		interrupts = <55 0x4>;
+		interrupt-parent = <&intc>;
+		cpdma_channels = <8>;
+		ale_entries = <1024>;
+		bd_ram_size = <0x2000>;
+		rx_descs = <64>;
+		mac_control = <0x20>;
+		slaves = <2>;
+		active_slave = <0>;
+		cpts_clock_mult = <0x80000000>;
+		cpts_clock_shift = <29>;
+		syscon = <&cm>;
+		cpsw-phy-sel = <&phy_sel>;
+		cpsw_emac0: slave@0 {
+			phy_id = <&davinci_mdio>, <0>;
+			phy-mode = "rgmii-txid";
+			/* Filled in by U-Boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 1 0>;
+		};
+		cpsw_emac1: slave@1 {
+			phy_id = <&davinci_mdio>, <1>;
+			phy-mode = "rgmii-txid";
+			/* Filled in by U-Boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 2 0>;
+		};
+	};
+
+(or)
+	mac: ethernet@4a100000 {
+		compatible = "ti,cpsw";
+		ti,hwmods = "cpgmac0";
+		cpdma_channels = <8>;
+		ale_entries = <1024>;
+		bd_ram_size = <0x2000>;
+		rx_descs = <64>;
+		mac_control = <0x20>;
+		slaves = <2>;
+		active_slave = <0>;
+		cpts_clock_mult = <0x80000000>;
+		cpts_clock_shift = <29>;
+		syscon = <&cm>;
+		cpsw-phy-sel = <&phy_sel>;
+		cpsw_emac0: slave@0 {
+			phy_id = <&davinci_mdio>, <0>;
+			phy-mode = "rgmii-txid";
+			/* Filled in by U-Boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 1 0>;
+		};
+		cpsw_emac1: slave@1 {
+			phy_id = <&davinci_mdio>, <1>;
+			phy-mode = "rgmii-txid";
+			/* Filled in by U-Boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+			phys = <&phy_gmii_sel 2 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/davicom,dm9000.yaml b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml
new file mode 100644
index 0000000000..66a7c6eec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davicom,dm9000.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9000 Fast Ethernet Controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: davicom,dm9000
+
+  reg:
+    items:
+      - description: Address registers
+      - description: Data registers
+
+  interrupts:
+    maxItems: 1
+
+  davicom,no-eeprom:
+    type: boolean
+    description: Configuration EEPROM is not available
+
+  davicom,ext-phy:
+    type: boolean
+    description: Use external PHY
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@a8000000 {
+        compatible = "davicom,dm9000";
+        reg = <0xa8000000 0x2>, <0xa8000002 0x2>;
+        interrupt-parent = <&gph1>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        local-mac-address = [00 00 de ad be ef];
+        davicom,no-eeprom;
+    };
diff --git a/Documentation/devicetree/bindings/net/davicom,dm9051.yaml b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
new file mode 100644
index 0000000000..52e852fef7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9051.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9051 SPI Ethernet Controller
+
+maintainers:
+  - Joseph CHANG <josright123@gmail.com>
+
+description: |
+  The DM9051 is a fully integrated and cost-effective low pin count single
+  chip Fast Ethernet controller with a Serial Peripheral Interface (SPI).
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: davicom,dm9051
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 45000000
+
+  interrupts:
+    maxItems: 1
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  # Raspberry Pi platform
+  - |
+    /* for Raspberry Pi with pin control stuff for GPIO irq */
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "davicom,dm9051";
+            reg = <0>; /* spi chip select */
+            local-mac-address = [00 00 00 00 00 00];
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <31200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
new file mode 100644
index 0000000000..5e3579e72e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -0,0 +1,44 @@
+* Texas Instruments Davinci EMAC
+
+This file provides information, what the device node
+for the davinci_emac interface contains.
+
+Required properties:
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+  "ti,dm816-emac"
+- reg: Offset and length of the register set for the device
+- ti,davinci-ctrl-reg-offset: offset to control register
+- ti,davinci-ctrl-mod-reg-offset: offset to control module register
+- ti,davinci-ctrl-ram-offset: offset to control module ram
+- ti,davinci-ctrl-ram-size: size of control module ram
+- interrupts: interrupt mapping for the davinci emac interrupts sources:
+              4 sources: <Receive Threshold Interrupt
+			  Receive Interrupt
+			  Transmit Interrupt
+			  Miscellaneous Interrupt>
+
+Optional properties:
+- phy-handle: See ethernet.txt file in the same directory.
+              If absent, davinci_emac driver defaults to 100/FULL.
+- ti,davinci-rmii-en: 1 byte, 1 means use RMII
+- ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Example (enbw_cmc board):
+	eth0: emac@1e20000 {
+		compatible = "ti,davinci-dm6467-emac";
+		reg = <0x220000 0x4000>;
+		ti,davinci-ctrl-reg-offset = <0x3000>;
+		ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+		ti,davinci-ctrl-ram-offset = <0>;
+		ti,davinci-ctrl-ram-size = <0x2000>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		interrupts = <33
+				34
+				35
+				36
+				>;
+		interrupt-parent = <&intc>;
+	};
diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
new file mode 100644
index 0000000000..f824fdae0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -0,0 +1,147 @@
+Atheros AR9331 built-in switch
+=============================
+
+It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
+MDIO bus. All PHYs are built-in as well.
+
+Required properties:
+
+ - compatible: should be: "qca,ar9331-switch"
+ - reg: Address on the MII bus for the switch.
+ - resets : Must contain an entry for each entry in reset-names.
+ - reset-names : Must include the following entries: "switch"
+ - interrupt-parent: Phandle to the parent interrupt controller
+ - interrupts: IRQ line for the switch
+ - interrupt-controller: Indicates the switch is itself an interrupt
+   controller. This is used for the PHY interrupts.
+ - #interrupt-cells: must be 1
+ - mdio: Container of PHY and devices on the switches MDIO bus.
+
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
+required and optional properties.
+Examples:
+
+eth0: ethernet@19000000 {
+	compatible = "qca,ar9330-eth";
+	reg = <0x19000000 0x200>;
+	interrupts = <4>;
+
+	resets = <&rst 9>, <&rst 22>;
+	reset-names = "mac", "mdio";
+	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+	clock-names = "eth", "mdio";
+
+	phy-mode = "mii";
+	phy-handle = <&phy_port4>;
+};
+
+eth1: ethernet@1a000000 {
+	compatible = "qca,ar9330-eth";
+	reg = <0x1a000000 0x200>;
+	interrupts = <5>;
+	resets = <&rst 13>, <&rst 23>;
+	reset-names = "mac", "mdio";
+	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+	clock-names = "eth", "mdio";
+
+	phy-mode = "gmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch10: switch@10 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			compatible = "qca,ar9331-switch";
+			reg = <0x10>;
+			resets = <&rst 8>;
+			reset-names = "switch";
+
+			interrupt-parent = <&miscintc>;
+			interrupts = <12>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch_port0: port@0 {
+					reg = <0x0>;
+					ethernet = <&eth1>;
+
+					phy-mode = "gmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				switch_port1: port@1 {
+					reg = <0x1>;
+					phy-handle = <&phy_port0>;
+					phy-mode = "internal";
+				};
+
+				switch_port2: port@2 {
+					reg = <0x2>;
+					phy-handle = <&phy_port1>;
+					phy-mode = "internal";
+				};
+
+				switch_port3: port@3 {
+					reg = <0x3>;
+					phy-handle = <&phy_port2>;
+					phy-mode = "internal";
+				};
+
+				switch_port4: port@4 {
+					reg = <0x4>;
+					phy-handle = <&phy_port3>;
+					phy-mode = "internal";
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				interrupt-parent = <&switch10>;
+
+				phy_port0: phy@0 {
+					reg = <0x0>;
+					interrupts = <0>;
+				};
+
+				phy_port1: phy@1 {
+					reg = <0x1>;
+					interrupts = <0>;
+				};
+
+				phy_port2: phy@2 {
+					reg = <0x2>;
+					interrupts = <0>;
+				};
+
+				phy_port3: phy@3 {
+					reg = <0x3>;
+					interrupts = <0>;
+				};
+
+				phy_port4: phy@4 {
+					reg = <0x4>;
+					interrupts = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
new file mode 100644
index 0000000000..9565a74021
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arrow SpeedChips XRS7000 Series Switch
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+  - George McCollister <george.mccollister@gmail.com>
+
+description:
+  The Arrow SpeedChips XRS7000 Series of single chip gigabit Ethernet switches
+  are designed for critical networking applications. They have up to three
+  RGMII ports and one RMII port and are managed via i2c or mdio.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - arrow,xrs7003e
+          - arrow,xrs7003f
+          - arrow,xrs7004e
+          - arrow,xrs7004f
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        switch@8 {
+            compatible = "arrow,xrs7004e";
+            reg = <0x8>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                ethernet-port@1 {
+                    reg = <1>;
+                    label = "lan0";
+                    phy-handle = <&swphy0>;
+                    phy-mode = "rgmii-id";
+                };
+                ethernet-port@2 {
+                    reg = <2>;
+                    label = "lan1";
+                    phy-handle = <&swphy1>;
+                    phy-mode = "rgmii-id";
+                };
+                ethernet-port@3 {
+                    reg = <3>;
+                    ethernet = <&fec1>;
+                    phy-mode = "rgmii-id";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
new file mode 100644
index 0000000000..4c78c54634
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53xx Ethernet switches
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  Broadcom BCM53xx Ethernet switches
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm5325
+      - const: brcm,bcm53115
+      - const: brcm,bcm53125
+      - const: brcm,bcm53128
+      - const: brcm,bcm53134
+      - const: brcm,bcm5365
+      - const: brcm,bcm5395
+      - const: brcm,bcm5389
+      - const: brcm,bcm5397
+      - const: brcm,bcm5398
+      - items:
+          - const: brcm,bcm11360-srab
+          - const: brcm,cygnus-srab
+      - items:
+          - enum:
+              - brcm,bcm53010-srab
+              - brcm,bcm53011-srab
+              - brcm,bcm53012-srab
+              - brcm,bcm53018-srab
+              - brcm,bcm53019-srab
+          - const: brcm,bcm5301x-srab
+      - items:
+          - enum:
+              - brcm,bcm11404-srab
+              - brcm,bcm11407-srab
+              - brcm,bcm11409-srab
+              - brcm,bcm58310-srab
+              - brcm,bcm58311-srab
+              - brcm,bcm58313-srab
+          - const: brcm,omega-srab
+      - items:
+          - enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+          - const: brcm,nsp-srab
+      - items:
+          - enum:
+              - brcm,bcm3384-switch
+              - brcm,bcm6318-switch
+              - brcm,bcm6328-switch
+              - brcm,bcm6362-switch
+              - brcm,bcm6368-switch
+              - brcm,bcm63268-switch
+          - const: brcm,bcm63xx-switch
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm5325
+              - brcm,bcm53115
+              - brcm,bcm53125
+              - brcm,bcm53128
+              - brcm,bcm5365
+              - brcm,bcm5395
+              - brcm,bcm5397
+              - brcm,bcm5398
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+    # BCM585xx/586xx/88312 SoCs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          items:
+            - const: srab
+            - const: mux_config
+            - const: sgmii_config
+        interrupts:
+          minItems: 13
+          maxItems: 13
+        interrupt-names:
+          items:
+            - const: link_state_p0
+            - const: link_state_p1
+            - const: link_state_p2
+            - const: link_state_p3
+            - const: link_state_p4
+            - const: link_state_p5
+            - const: link_state_p7
+            - const: link_state_p8
+            - const: phy
+            - const: ts
+            - const: imp_sleep_timer_p5
+            - const: imp_sleep_timer_p7
+            - const: imp_sleep_timer_p8
+      required:
+        - interrupts
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-switch@1e {
+            compatible = "brcm,bcm53125";
+            reg = <30>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "cable-modem";
+                    phy-mode = "rgmii-txid";
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+                    phy-mode = "rgmii-txid";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    axi {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        switch@36000 {
+            compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+            reg = <0x36000 0x1000>,
+                  <0x3f308 0x8>,
+                  <0x3f410 0xc>;
+            reg-names = "srab", "mux_config", "sgmii_config";
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "link_state_p0",
+                              "link_state_p1",
+                              "link_state_p2",
+                              "link_state_p3",
+                              "link_state_p4",
+                              "link_state_p5",
+                              "link_state_p7",
+                              "link_state_p8",
+                              "phy",
+                              "ts",
+                              "imp_sleep_timer_p5",
+                              "imp_sleep_timer_p7",
+                              "imp_sleep_timer_p8";
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    label = "port0";
+                    reg = <0>;
+                };
+
+                port@1 {
+                    label = "port1";
+                    reg = <1>;
+                };
+
+                port@2 {
+                    label = "port2";
+                    reg = <2>;
+                };
+
+                port@3 {
+                    label = "port3";
+                    reg = <3>;
+                };
+
+                port@4 {
+                    label = "port4";
+                    reg = <4>;
+                };
+
+                port@8 {
+                    ethernet = <&amac2>;
+                    reg = <8>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
new file mode 100644
index 0000000000..b06c416893
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/brcm,sf2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Starfighter 2 integrated switch
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-switch
+          - brcm,bcm7278-switch-v4.0
+          - brcm,bcm7278-switch-v4.8
+          - brcm,bcm7445-switch-v4.0
+
+  reg:
+    minItems: 6
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: core
+      - const: reg
+      - const: intrl2_0
+      - const: intrl2_1
+      - const: fcb
+      - const: acb
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: switch_0
+      - const: switch_1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: switch
+
+  clocks:
+    minItems: 1
+    items:
+      - description: switch's main clock
+      - description: dividing of the switch core clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_switch
+      - const: sw_switch_mdiv
+
+  brcm,num-gphy:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum number of integrated gigabit PHYs in the switch
+
+  brcm,num-rgmii-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum number of RGMII interfaces supported by the switch
+
+  brcm,fcb-pause-override:
+    description: if present indicates that the switch supports Failover Control
+      Block pause override capability
+    type: boolean
+
+  brcm,acb-packets-inflight:
+    description: if present indicates that the switch Admission Control Block
+      supports reporting the number of packets in-flight in a switch queue
+    type: boolean
+
+  ports:
+    type: object
+
+    patternProperties:
+      '^port@[0-9a-f]$':
+        $ref: dsa-port.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          brcm,use-bcm-hdr:
+            description: if present, indicates that the switch port has Broadcom
+              tags enabled (per-packet metadata)
+            type: boolean
+
+required:
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm7278-switch-v4.0
+              - brcm,bcm7278-switch-v4.8
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          minItems: 1
+          maxItems: 1
+      required:
+        - clocks
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7445-switch-v4.0
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - clocks
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    switch@f0b00000 {
+            compatible = "brcm,bcm7445-switch-v4.0";
+            reg = <0xf0b00000 0x40000>,
+                  <0xf0b40000 0x110>,
+                  <0xf0b40340 0x30>,
+                  <0xf0b40380 0x30>,
+                  <0xf0b40400 0x34>,
+                  <0xf0b40600 0x208>;
+            reg-names = "core", "reg", "intrl2_0", "intrl2_1",
+                        "fcb", "acb";
+            interrupts = <0 0x18 0>,
+                         <0 0x19 0>;
+            clocks = <&sw_switch>, <&sw_switch_mdiv>;
+            clock-names = "sw_switch", "sw_switch_mdiv";
+            brcm,num-gphy = <1>;
+            brcm,num-rgmii-ports = <2>;
+            brcm,fcb-pause-override;
+            brcm,acb-packets-inflight;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            label = "gphy";
+                            reg = <0>;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
new file mode 100644
index 0000000000..4801204699
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic DSA Switch Port
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  A DSA switch port is a component of a switch that manages one MAC, and can
+  pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have
+  DSA-specific functionality.
+
+$ref: /schemas/net/ethernet-switch-port.yaml#
+
+properties:
+  reg:
+    items:
+      - description: Port number
+
+  label:
+    description:
+      Describes the label associated with this port, which will become
+      the netdev name
+    $ref: /schemas/types.yaml#/definitions/string
+
+  link:
+    description:
+      Should be a list of phandles to other switch's DSA port. This
+      port is used as the outgoing port towards the phandle ports. The
+      full routing information must be given, not just the one hop
+      routes to neighbouring switches
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  ethernet:
+    description:
+      Should be a phandle to a valid Ethernet device node.  This host
+      device is what the switch port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  dsa-tag-protocol:
+    description:
+      Instead of the default, the switch will use this tag protocol if
+      possible. Useful when a device supports multiple protocols and
+      the default is incompatible with the Ethernet device.
+    enum:
+      - dsa
+      - edsa
+      - ocelot
+      - ocelot-8021q
+      - rtl8_4
+      - rtl8_4t
+      - seville
+
+# CPU and DSA ports must have phylink-compatible link descriptions
+if:
+  oneOf:
+    - required: [ ethernet ]
+    - required: [ link ]
+then:
+  allOf:
+    - required:
+        - phy-mode
+    - oneOf:
+        - required:
+            - fixed-link
+        - required:
+            - phy-handle
+        - required:
+            - managed
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
new file mode 100644
index 0000000000..dab208b5c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -0,0 +1,4 @@
+Distributed Switch Architecture Device Tree Bindings
+----------------------------------------------------
+
+See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
new file mode 100644
index 0000000000..ec74a660be
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/dsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  This binding represents Ethernet Switches which have a dedicated CPU
+  port. That port is usually connected to an Ethernet Controller of the
+  SoC. Such setups are typical for embedded devices.
+
+select: false
+
+$ref: /schemas/net/ethernet-switch.yaml#
+
+properties:
+  dsa,member:
+    minItems: 2
+    maxItems: 2
+    description:
+      A two element list indicates which DSA cluster, and position within the
+      cluster a switch takes. <0 0> is cluster 0, switch 0. <0 1> is cluster 0,
+      switch 1. <1 0> is cluster 1, switch 0. A switch not part of any cluster
+      (single device hanging off a CPU port) must not specify this property
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true
+
+$defs:
+  ethernet-ports:
+    description: A DSA switch without any extra port properties
+    $ref: '#'
+
+    patternProperties:
+      "^(ethernet-)?ports$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            description: Ethernet switch ports
+            $ref: dsa-port.yaml#
+            unevaluatedProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
new file mode 100644
index 0000000000..4021b054f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/hirschmann,hellcreek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hirschmann Hellcreek TSN Switch
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+  - Kurt Kanzenbach <kurt@linutronix.de>
+
+description:
+  The Hellcreek TSN Switch IP is a 802.1Q Ethernet compliant switch. It supports
+  the Precision Time Protocol, Hardware Timestamping as well the Time Aware
+  Shaper.
+
+properties:
+  compatible:
+    items:
+      - const: hirschmann,hellcreek-de1soc-r1
+
+  reg:
+    description:
+      The physical base address and size of TSN and PTP memory base
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: tsn
+      - const: ptp
+
+  leds:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[01]$":
+        type: object
+        description: Hellcreek leds
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            items:
+              - enum: [0, 1]
+            description: Led number
+
+          label: true
+
+          default-state: true
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ethernet-ports
+  - leds
+
+unevaluatedProperties: false
+
+examples:
+  - |
+        switch0: switch@ff240000 {
+            compatible = "hirschmann,hellcreek-de1soc-r1";
+            reg = <0xff240000 0x1000>,
+                  <0xff250000 0x1000>;
+            reg-names = "tsn", "ptp";
+            dsa,member = <0 0>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "mii";
+
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan0";
+                    phy-handle = <&phy1>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan1";
+                    phy-handle = <&phy2>;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    label = "sync_good";
+                    default-state = "on";
+                };
+
+                led@1 {
+                    reg = <1>;
+                    label = "is_gm";
+                    default-state = "off";
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
new file mode 100644
index 0000000000..46a732087f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -0,0 +1,100 @@
+SMSC/MicroChip LAN9303 three port ethernet switch
+-------------------------------------------------
+
+Required properties:
+
+- compatible: should be
+  - "smsc,lan9303-i2c" for I2C managed mode
+    or
+  - "smsc,lan9303-mdio" for mdio managed mode
+
+Optional properties:
+
+- reset-gpios: GPIO to be used to reset the whole device
+- reset-duration: reset duration in milliseconds, defaults to 200 ms
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt. The CPU port of this switch is always port 0.
+
+Note: always use 'reg = <0/1/2>;' for the three DSA ports, even if the device is
+configured to use 1/2/3 instead. This hardware configuration will be
+auto-detected and mapped accordingly.
+
+Example:
+
+I2C managed mode:
+
+	master: masterdevice@X {
+
+		fixed-link { /* RMII fixed link to LAN9303 */
+			speed = <100>;
+			full-duplex;
+		};
+	};
+
+	switch: switch@a {
+		compatible = "smsc,lan9303-i2c";
+		reg = <0xa>;
+		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		reset-duration = <200>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 { /* RMII fixed link to master */
+				reg = <0>;
+				ethernet = <&master>;
+			};
+
+			port@1 { /* external port 1 */
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 { /* external port 2 */
+				reg = <2>;
+				label = "lan2";
+			};
+		};
+	};
+
+MDIO managed mode:
+
+	master: masterdevice@X {
+		phy-handle = <&switch>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch: switch-phy@0 {
+				compatible = "smsc,lan9303-mdio";
+				reg = <0>;
+				reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+				reset-duration = <100>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						ethernet = <&master>;
+					};
+
+					port@1 { /* external port 1 */
+						reg = <1>;
+						label = "lan1";
+					};
+
+					port@2 { /* external port 2 */
+						reg = <2>;
+						label = "lan2";
+					};
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
new file mode 100644
index 0000000000..8bb1eff21c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -0,0 +1,146 @@
+Lantiq GSWIP Ethernet switches
+==================================
+
+Required properties for GSWIP core:
+
+- compatible	: "lantiq,xrx200-gswip" for the embedded GSWIP in the
+		  xRX200 SoC
+		  "lantiq,xrx300-gswip" for the embedded GSWIP in the
+		  xRX300 SoC
+		  "lantiq,xrx330-gswip" for the embedded GSWIP in the
+		  xRX330 SoC
+- reg		: memory range of the GSWIP core registers
+		: memory range of the GSWIP MDIO registers
+		: memory range of the GSWIP MII registers
+
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of
+additional required and optional properties.
+
+
+Required properties for MDIO bus:
+- compatible	: "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP
+		  core of the xRX200 SoC and the PHYs connected to it.
+
+See Documentation/devicetree/bindings/net/mdio.txt for a list of additional
+required and optional properties.
+
+
+Required properties for GPHY firmware loading:
+- compatible	: "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
+		  "lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
+		  "lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
+		  for the loading of the firmware into the embedded
+		  GPHY core of the SoC.
+- lantiq,rcu	: reference to the rcu syscon
+
+The GPHY firmware loader has a list of GPHY entries, one for each
+embedded GPHY
+
+- reg		: Offset of the GPHY firmware register in the RCU
+		  register range
+- resets	: list of resets of the embedded GPHY
+- reset-names	: list of names of the resets
+
+Example:
+
+Ethernet switch on the VRX200 SoC:
+
+switch@e108000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "lantiq,xrx200-gswip";
+	reg = <	0xe108000 0x3100	/* switch */
+		0xe10b100 0xd8		/* mdio */
+		0xe10b1d8 0x130		/* mii */
+		>;
+	dsa,member = <0 0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan3";
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan4";
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+			phy-mode = "internal";
+			phy-handle = <&phy11>;
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan1";
+			phy-mode = "internal";
+			phy-handle = <&phy13>;
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "wan";
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+
+		port@6 {
+			reg = <0x6>;
+			ethernet = <&eth0>;
+		};
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "lantiq,xrx200-mdio";
+		reg = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+		phy5: ethernet-phy@5 {
+			reg = <0x5>;
+		};
+		phy11: ethernet-phy@11 {
+			reg = <0x11>;
+		};
+		phy13: ethernet-phy@13 {
+			reg = <0x13>;
+		};
+	};
+
+	gphy-fw {
+		compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
+		lantiq,rcu = <&rcu0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gphy@20 {
+			reg = <0x20>;
+
+			resets = <&reset0 31 30>;
+			reset-names = "gphy";
+		};
+
+		gphy@68 {
+			reg = <0x68>;
+
+			resets = <&reset0 29 28>;
+			reset-names = "gphy";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
new file mode 100644
index 0000000000..6ec0c181b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -0,0 +1,109 @@
+Marvell DSA Switch Device Tree Bindings
+---------------------------------------
+
+WARNING: This binding is currently unstable. Do not program it into a
+FLASH never to be changed again. Once this binding is stable, this
+warning will be removed.
+
+If you need a stable binding, use the old dsa.txt binding.
+
+Marvell Switches are MDIO devices. The following properties should be
+placed as a child node of an mdio device.
+
+The properties described here are those specific to Marvell devices.
+Additional required and optional properties can be found in dsa.txt.
+
+The compatibility string is used only to find an identification register,
+which is at a different MDIO base address in different switch families.
+- "marvell,mv88e6085"	: Switch has base address 0x10. Use with models:
+			  6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
+			  6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
+			  6341, 6350, 6351, 6352
+- "marvell,mv88e6190"	: Switch has base address 0x00. Use with models:
+			  6190, 6190X, 6191, 6290, 6361, 6390, 6390X
+- "marvell,mv88e6250"	: Switch has base address 0x08 or 0x18. Use with model:
+			  6220, 6250
+
+Required properties:
+- compatible		: Should be one of "marvell,mv88e6085",
+			  "marvell,mv88e6190" or "marvell,mv88e6250" as
+			  indicated above
+- reg			: Address on the MII bus for the switch.
+
+Optional properties:
+
+- reset-gpios		: Should be a gpio specifier for a reset line
+- interrupts		: Interrupt from the switch
+- interrupt-controller	: Indicates the switch is itself an interrupt
+			  controller. This is used for the PHY interrupts.
+#interrupt-cells = <2>	: Controller uses two cells, number and flag
+- eeprom-length		: Set to the length of an EEPROM connected to the
+			  switch. Must be set if the switch can not detect
+			  the presence and/or size of a connected EEPROM,
+			  otherwise optional.
+- mdio			: Container of PHY and devices on the switches MDIO
+			  bus.
+- mdio?		: Container of PHYs and devices on the external MDIO
+			  bus. The node must contains a compatible string of
+			  "marvell,mv88e6xxx-mdio-external"
+
+Example:
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		switch0: switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		switch0: switch@0 {
+			compatible = "marvell,mv88e6190";
+			reg = <0>;
+			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			mdio1 {
+				compatible = "marvell,mv88e6xxx-mdio-external";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy9: switch1phy0@9 {
+					reg = <9>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
new file mode 100644
index 0000000000..e532c6b795
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -0,0 +1,812 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7530 and MT7531 Ethernet Switches
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Landen Chao <Landen.Chao@mediatek.com>
+  - DENG Qingfang <dqfext@gmail.com>
+  - Sean Wang <sean.wang@mediatek.com>
+  - Daniel Golle <daniel@makrotopia.org>
+
+description: |
+  There are three versions of MT7530, standalone, in a multi-chip module and
+  built-into a SoC.
+
+  MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
+  MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
+
+  The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
+  Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
+  memory map rather than using MDIO. The switch got an internally connected 10G
+  CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
+
+  MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+  and the switch registers are directly mapped into SoC's memory map rather than
+  using MDIO. The DSA driver currently doesn't support MT7620 variants.
+
+  There is only the standalone version of MT7531.
+
+  Port 5 on MT7530 has got various ways of configuration:
+
+    - Port 5 can be used as a CPU port.
+
+    - PHY 0 or 4 of the switch can be muxed to gmac5 of the switch. Therefore,
+      the gmac of the SoC which is wired to port 5 can connect to the PHY.
+      This is usually used for connecting the wan port directly to the CPU to
+      achieve 2 Gbps routing in total.
+
+      The driver looks up the reg on the ethernet-phy node, which the phy-handle
+      property on the gmac node refers to, to mux the specified phy.
+
+      The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the
+      compatible string and the reg must be 1. So, for now, only gmac1 of a
+      MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+
+      Check out example 5.
+
+    - For the multi-chip module MT7530, in case of an external phy wired to
+      gmac1 of the SoC, port 5 must not be enabled.
+
+      In case of muxing PHY 0 or 4, the external phy must not be enabled.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+
+      Check out example 6.
+
+    - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave.
+
+      For the multi-chip module MT7530, the external phy must be wired TX to TX
+      to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired
+      this way.
+
+      For the multi-chip module MT7530, muxing PHY 0 or 4 won't work when the
+      external phy is connected TX to TX.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with gpio function.
+
+      Check out example 7.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC
+        const: mediatek,mt7530
+
+      - description:
+          Standalone MT7531
+        const: mediatek,mt7531
+
+      - description:
+          Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+        const: mediatek,mt7621
+
+      - description:
+          Built-in switch of the MT7988 SoC
+        const: mediatek,mt7988-switch
+
+  reg:
+    maxItems: 1
+
+  core-supply:
+    description:
+      Phandle to the regulator node necessary for the core power.
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller:
+    type: boolean
+    description: |
+      If defined, LED controller of the MT7530 switch will run on GPIO mode.
+
+      There are 15 controllable pins.
+      port 0 LED 0..2 as GPIO 0..2
+      port 1 LED 0..2 as GPIO 3..5
+      port 2 LED 0..2 as GPIO 6..8
+      port 3 LED 0..2 as GPIO 9..11
+      port 4 LED 0..2 as GPIO 12..14
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  io-supply:
+    description: |
+      Phandle to the regulator node necessary for the I/O power.
+      See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
+      details for the regulator setup on these boards.
+
+  mediatek,mcm:
+    type: boolean
+    description:
+      Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
+      switch is a part of the multi-chip module.
+
+  reset-gpios:
+    description: |
+      GPIO to reset the switch. Use this if mediatek,mcm is not used.
+      This property is optional because some boards share the reset line with
+      other components which makes it impossible to probe the switch if the
+      reset line is used.
+    maxItems: 1
+
+  reset-names:
+    const: mcm
+
+  resets:
+    description:
+      Phandle pointing to the system reset controller with line index for the
+      ethsys.
+    maxItems: 1
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+
+        properties:
+          reg:
+            description:
+              Port address described must be 5 or 6 for CPU port and from 0 to 5
+              for user ports.
+
+        allOf:
+          - if:
+              required: [ ethernet ]
+            then:
+              properties:
+                reg:
+                  enum:
+                    - 5
+                    - 6
+
+required:
+  - compatible
+  - reg
+
+$defs:
+  mt7530-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - gmii
+                      - mii
+                      - rgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - rgmii
+                      - trgmii
+
+  mt7531-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - rgmii
+                      - sgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - sgmii
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - if:
+      required:
+        - mediatek,mcm
+    then:
+      properties:
+        reset-gpios: false
+
+      required:
+        - resets
+        - reset-names
+
+  - dependencies:
+      interrupt-controller: [ interrupts ]
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7530
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - core-supply
+        - io-supply
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7531
+    then:
+      $ref: "#/$defs/mt7531-dsa-port"
+      properties:
+        gpio-controller: false
+        mediatek,mcm: false
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7621
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - mediatek,mcm
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7988-switch
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      properties:
+        gpio-controller: false
+        mediatek,mcm: false
+        reset-names: false
+
+unevaluatedProperties: false
+
+examples:
+  # Example 1: Standalone MT7530
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            reset-gpios = <&pio 33 0>;
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 2: MT7530 in MT7623AI SoC
+  - |
+    #include <dt-bindings/reset/mt2701-resets.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+            reset-names = "mcm";
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 3: Standalone MT7531
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@0 {
+            compatible = "mediatek,mt7531";
+            reg = <0>;
+
+            reset-gpios = <&pio 54 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&pio>;
+            interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "2500base-x";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7621";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&sysc MT7621_RST_MCM>;
+            reset-names = "mcm";
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example5_ethphy4>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* MT7530's phy4 */
+            example5_ethphy4: ethernet-phy@4 {
+                reg = <4>;
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    /* Commented out, phy4 is connected to gmac1.
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+                    */
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 6: MT7621: mux external phy to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example6_ethphy7>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example6_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 7: MT7621: mux external phy to MT7530's port 5
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example7_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@5 {
+                        reg = <5>;
+                        label = "extphy";
+                        phy-mode = "rgmii-txid";
+                        phy-handle = <&example7_ethphy7>;
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
new file mode 100644
index 0000000000..03b5567be3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip KSZ Series Ethernet switches
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Woojung Huh <Woojung.Huh@microchip.com>
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
+  # required and optional properties.
+  compatible:
+    enum:
+      - microchip,ksz8765
+      - microchip,ksz8794
+      - microchip,ksz8795
+      - microchip,ksz8863
+      - microchip,ksz8873
+      - microchip,ksz9477
+      - microchip,ksz9897
+      - microchip,ksz9896
+      - microchip,ksz9567
+      - microchip,ksz8565
+      - microchip,ksz9893
+      - microchip,ksz9563
+      - microchip,ksz8563
+
+  reset-gpios:
+    description:
+      Should be a gpio specifier for a reset line.
+    maxItems: 1
+
+  microchip,synclko-125:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
+
+  microchip,synclko-disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO clock should be disabled. Do not mix with
+      microchip,synclko-125.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Ethernet switch connected via SPI to the host, CPU port wired to eth0:
+    eth0 {
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-0 = <&pinctrl_spi_ksz>;
+        cs-gpios = <&pioC 25 0>;
+        id = <1>;
+
+        ksz9477: switch@0 {
+            compatible = "microchip,ksz9477";
+            reg = <0>;
+            reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@4 {
+                    reg = <4>;
+                    label = "lan5";
+                };
+                port@5 {
+                    reg = <5>;
+                    ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+
+        ksz8565: switch@1 {
+            compatible = "microchip,ksz8565";
+            reg = <1>;
+
+            spi-max-frequency = <44000000>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
new file mode 100644
index 0000000000..8d7e878b84
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LAN937x Ethernet Switch Series
+
+maintainers:
+  - UNGLinuxDriver@microchip.com
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9370
+      - microchip,lan9371
+      - microchip,lan9372
+      - microchip,lan9373
+      - microchip,lan9374
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  reset-gpios:
+    description: Optional gpio specifier for a reset line
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-id
+                      - rgmii-txid
+                      - rgmii-rxid
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+                tx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    macb0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fixed-link {
+                    speed = <1000>;
+                    full-duplex;
+            };
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            lan9374: switch@0 {
+                    compatible = "microchip,lan9374";
+                    reg = <0>;
+                    spi-max-frequency = <44000000>;
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan1";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan2";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy1>;
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan4";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy2>;
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan6";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy3>;
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+                                    ethernet = <&macb0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@5 {
+                                    reg = <5>;
+                                    label = "lan7";
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@6 {
+                                    reg = <6>;
+                                    label = "lan5";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy6>;
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    label = "lan3";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy7>;
+                            };
+                    };
+
+                    mdio {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            t1phy0: ethernet-phy@0{
+                                    reg = <0x0>;
+                            };
+
+                            t1phy1: ethernet-phy@1{
+                                    reg = <0x1>;
+                            };
+
+                            t1phy2: ethernet-phy@2{
+                                    reg = <0x2>;
+                            };
+
+                            t1phy3: ethernet-phy@3{
+                                    reg = <0x3>;
+                            };
+
+                            t1phy6: ethernet-phy@6{
+                                    reg = <0x6>;
+                            };
+
+                            t1phy7: ethernet-phy@7{
+                                    reg = <0x7>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
new file mode 100644
index 0000000000..fe02d05196
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Ocelot Switch Family
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  There are multiple switches which are either part of the Ocelot-1 family, or
+  derivatives of this architecture. These switches can be found embedded in
+  various SoCs and accessed using MMIO, or as discrete chips and accessed over
+  SPI or PCIe. The present DSA binding shall be used when the host controlling
+  them performs packet I/O primarily through an Ethernet port of the switch
+  (which is attached to an Ethernet port of the host), rather than through
+  Frame DMA or register-based I/O.
+
+  VSC9953 (Seville):
+
+    This is found in the NXP T1040, where it is a memory-mapped platform
+    device.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 8 and 9
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7
+
+  VSC9959 (Felix):
+
+    This is found in the NXP LS1028A. It is a PCI device, part of the larger
+    enetc root complex. As a result, the ethernet-switch node is a sub-node of
+    the PCIe root complex node and its "reg" property conforms to the parent
+    node bindings, describing it as PF 5 of device 0, bus 0.
+
+    If any external switch port is enabled, the enetc PF2 (enetc_port2) should
+    be enabled as well. This is because the internal MDIO bus (exposed through
+    EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc
+    port 2 and not to Felix.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 4 and 5
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3
+      - phy-mode = "usxgmii": on ports 0, 1, 2, 3
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3
+      - phy-mode = "2500base-x": on ports 0, 1, 2, 3
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc9953-switch
+      - pci1957,eef0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description:
+      Used to signal availability of PTP TX timestamps, and state changes of
+      the MAC merge layer of ports that support Frame Preemption.
+
+  little-endian: true
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - if:
+      properties:
+        compatible:
+          const: pci1957,eef0
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  # Felix VSC9959 (NXP LS1028A)
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie { /* Integrated Endpoint Root Complex */
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        ethernet-switch@0,5 {
+            compatible = "pci1957,eef0";
+            reg = <0x000500 0 0 0 0>;
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    ethernet = <&enetc_port2>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    ethernet = <&enetc_port3>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+  # Seville VSC9953 (NXP T1040)
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ethernet-switch@800000 {
+            compatible = "mscc,vsc9953-switch";
+            reg = <0x800000 0x290000>;
+            little-endian;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy4>;
+                    managed = "in-band-status";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy5>;
+                    managed = "in-band-status";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy6>;
+                    managed = "in-band-status";
+                };
+
+                port@7 {
+                    reg = <7>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy7>;
+                    managed = "in-band-status";
+                };
+
+                port@8 {
+                    reg = <8>;
+                    phy-mode = "internal";
+                    ethernet = <&enet0>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@9 {
+                    reg = <9>;
+                    phy-mode = "internal";
+                    ethernet = <&enet1>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
new file mode 100644
index 0000000000..4d5f5cc6d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP SJA1105 Automotive Ethernet Switch Family
+
+description:
+  The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at
+  least one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
+  cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
+  depends on the SPI bus master driver.
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,sja1105e
+      - nxp,sja1105t
+      - nxp,sja1105p
+      - nxp,sja1105q
+      - nxp,sja1105r
+      - nxp,sja1105s
+      - nxp,sja1110a
+      - nxp,sja1110b
+      - nxp,sja1110c
+      - nxp,sja1110d
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+  # Optional container node for the 2 internal MDIO buses of the SJA1110
+  # (one for the internal 100base-T1 PHYs and the other for the single
+  # 100base-TX PHY). The "reg" property does not have physical significance.
+  # The PHY addresses to port correspondence is as follows: for 100base-T1,
+  # port 5 has PHY 1, port 6 has PHY 2 etc, while for 100base-TX, port 1 has
+  # PHY 1.
+  mdios:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^mdio@[0-1]$":
+        $ref: /schemas/net/mdio.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          compatible:
+            oneOf:
+              - enum:
+                  - nxp,sja1110-base-t1-mdio
+                  - nxp,sja1110-base-tx-mdio
+
+          reg:
+            oneOf:
+              - enum:
+                  - 0
+                  - 1
+
+        required:
+          - compatible
+          - reg
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-rxid
+                      - rgmii-txid
+                      - rgmii-id
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+                tx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+
+required:
+  - compatible
+  - reg
+
+$defs:
+  internal-delay-ps:
+    description:
+      Disable tunable delay lines using 0 ps, or enable them and select
+      the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps
+      (101.7 degree shift) in increments of 0.9 degrees (20 ps).
+    enum:
+      [0, 1640, 1660, 1680, 1700, 1720, 1740, 1760, 1780, 1800, 1820, 1840,
+       1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
+       2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nxp,sja1105e
+            - nxp,sja1105p
+            - nxp,sja1105q
+            - nxp,sja1105r
+            - nxp,sja1105s
+            - nxp,sja1105t
+    then:
+      properties:
+        spi-cpol: false
+      required:
+        - spi-cpha
+    else:
+      properties:
+        spi-cpha: false
+      required:
+        - spi-cpol
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-switch@1 {
+                    reg = <0x1>;
+                    compatible = "nxp,sja1105t";
+                    spi-cpha;
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    phy-handle = <&rgmii_phy6>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <0>;
+                            };
+
+                            port@1 {
+                                    phy-handle = <&rgmii_phy3>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <1>;
+                            };
+
+                            port@2 {
+                                    phy-handle = <&rgmii_phy4>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <2>;
+                            };
+
+                            port@3 {
+                                    phy-handle = <&rgmii_phy4>;
+                                    phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <3>;
+                            };
+
+                            port@4 {
+                                    ethernet = <&enet2>;
+                                    phy-mode = "rgmii";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
+                                    reg = <4>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
new file mode 100644
index 0000000000..df64eebebe
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -0,0 +1,320 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA83xx switch family
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description:
+  If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode
+  describing a port needs to have a valid phandle referencing the internal PHY
+  it is connected to. This is because there is no N:N mapping of port and PHY
+  ID. To declare the internal mdio-bus configuration, declare an MDIO node in
+  the switch node and declare the phandle for the port, referencing the internal
+  PHY it is connected to. In this config, an internal mdio-bus is registered and
+  the MDIO master is used for communication. Mixed external and internal
+  mdio-bus configurations are not supported by the hardware.
+  Each phy has at most 3 LEDs connected and can be declared
+  using the standard LEDs structure.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qca,qca8327
+          - qca,qca8328
+          - qca,qca8334
+          - qca,qca8337
+    description: |
+      qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
+      qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package
+      qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package
+      qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+  qca,ignore-power-on-sel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Ignore power-on pin strapping to configure LED open-drain or EEPROM
+      presence. This is needed for devices with incorrect configuration or when
+      the OEM has decided not to use pin strapping and falls back to SW regs.
+
+  qca,led-open-drain:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to
+      be set, otherwise the driver will fail at probe. This is required if the
+      OEM does not use pin strapping to set this mode and prefers to set it
+      using SW regs. The pin strappings related to LED open-drain mode are
+      B68 on the QCA832x and B49 on the QCA833x.
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Qca8k switch have an internal mdio to access switch port.
+                 If this is not present, the legacy mapping is used and the
+                 internal mdio access is used.
+                 With the legacy mapping the reg corresponding to the internal
+                 mdio is the switch reg with an offset of -1.
+
+$ref: dsa.yaml#
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    patternProperties:
+      "^(ethernet-)?port@[0-6]$":
+        type: object
+        description: Ethernet switch ports
+
+        $ref: dsa-port.yaml#
+
+        properties:
+          qca,sgmii-rxclk-falling-edge:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Set the receive clock phase to falling edge. Mostly commonly used on
+              the QCA8327 with CPU port 0 set to SGMII.
+
+          qca,sgmii-txclk-falling-edge:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Set the transmit clock phase to falling edge.
+
+          qca,sgmii-enable-pll:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              For SGMII CPU port, explicitly enable PLL, TX and RX chain along with
+              Signal Detection. On the QCA8327 this should not be enabled, otherwise
+              the SGMII port will not initialize. When used on the QCA8337, revision 3
+              or greater, a warning will be displayed. When the CPU port is set to
+              SGMII on the QCA8337, it is advised to set this unless a communication
+              issue is observed.
+
+        unevaluatedProperties: false
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        external_phy_port1: ethernet-phy@0 {
+            reg = <0>;
+        };
+
+        external_phy_port2: ethernet-phy@1 {
+            reg = <1>;
+        };
+
+        external_phy_port3: ethernet-phy@2 {
+            reg = <2>;
+        };
+
+        external_phy_port4: ethernet-phy@3 {
+            reg = <3>;
+        };
+
+        external_phy_port5: ethernet-phy@4 {
+            reg = <4>;
+        };
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan1";
+                    phy-handle = <&external_phy_port1>;
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-handle = <&external_phy_port2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan3";
+                    phy-handle = <&external_phy_port3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "lan4";
+                    phy-handle = <&external_phy_port4>;
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "wan";
+                    phy-handle = <&external_phy_port5>;
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan1";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port1>;
+
+                    leds {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            default-state = "keep";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            default-state = "keep";
+                        };
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan3";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "lan4";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port4>;
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "wan";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port5>;
+                };
+
+                port@6 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "sgmii";
+
+                    qca,sgmii-rxclk-falling-edge;
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                internal_phy_port1: ethernet-phy@0 {
+                    reg = <0>;
+                };
+
+                internal_phy_port2: ethernet-phy@1 {
+                    reg = <1>;
+                };
+
+                internal_phy_port3: ethernet-phy@2 {
+                    reg = <2>;
+                };
+
+                internal_phy_port4: ethernet-phy@3 {
+                    reg = <3>;
+                };
+
+                internal_phy_port5: ethernet-phy@4 {
+                    reg = <4>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
new file mode 100644
index 0000000000..cfd69c2604
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -0,0 +1,386 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/realtek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek switches for unmanaged switches
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Realtek advertises these chips as fast/gigabit switches or unmanaged
+  switches. They can be controlled using different interfaces, like SMI,
+  MDIO or SPI.
+
+  The SMI "Simple Management Interface" is a two-wire protocol using
+  bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
+  not use the MDIO protocol. This binding defines how to specify the
+  SMI-based Realtek devices. The realtek-smi driver is a platform driver
+  and it must be inserted inside a platform node.
+
+  The MDIO-connected switches use MDIO protocol to access their registers.
+  The realtek-mdio driver is an MDIO driver and it must be inserted inside
+  an MDIO node.
+
+  The compatible string is only used to identify which (silicon) family the
+  switch belongs to. Roughly speaking, a family is any set of Realtek switches
+  whose chip identification register(s) have a common location and semantics.
+  The different models in a given family can be automatically disambiguated by
+  parsing the chip identification register(s) according to the given family,
+  avoiding the need for a unique compatible string for each model.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8365mb
+      - realtek,rtl8366rb
+    description: |
+      realtek,rtl8365mb:
+        Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB,
+        RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S,
+        RTL8367SB, RTL8370MB, RTL8310SR
+      realtek,rtl8366rb:
+        Use with models RTL8366RB, RTL8366S
+
+  mdc-gpios:
+    description: GPIO line for the MDC clock line.
+    maxItems: 1
+
+  mdio-gpios:
+    description: GPIO line for the MDIO data line.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+  realtek,disable-leds:
+    type: boolean
+    description: |
+      if the LED drivers are not used in the hardware design,
+      this will disable them so they are not turned on
+      and wasting power.
+
+  interrupt-controller:
+    type: object
+    description: |
+      This defines an interrupt controller with an IRQ line (typically
+      a GPIO) that will demultiplex and handle the interrupt from the single
+      interrupt line coming out of one of the Realtek switch chips. It most
+      importantly provides link up/down interrupts to the PHY blocks inside
+      the ASIC.
+
+    properties:
+
+      interrupt-controller: true
+
+      interrupts:
+        maxItems: 1
+        description:
+          A single IRQ line from the switch, either active LOW or HIGH
+
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+    required:
+      - interrupt-controller
+      - '#address-cells'
+      - '#interrupt-cells'
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: realtek,smi-mdio
+
+if:
+  required:
+    - reg
+
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  not:
+    required:
+      - mdc-gpios
+      - mdio-gpios
+      - mdio
+
+  properties:
+    mdc-gpios: false
+    mdio-gpios: false
+    mdio: false
+
+else:
+  required:
+    - mdc-gpios
+    - mdio-gpios
+    - mdio
+    - reset-gpios
+
+required:
+  - compatible
+
+    #  - mdc-gpios
+    #  - mdio-gpios
+    #  - reset-gpios
+    #  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8366rb";
+                    /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+                    mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+                    switch_intc1: interrupt-controller {
+                            /* GPIO 15 provides the interrupt */
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan0";
+                                    phy-handle = <&phy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan1";
+                                    phy-handle = <&phy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                                    phy-handle = <&phy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan3";
+                                    phy-handle = <&phy3>;
+                            };
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                                    phy-handle = <&phy4>;
+                            };
+                            port@5 {
+                                    reg = <5>;
+                                    ethernet = <&gmac0>;
+                                    phy-mode = "rgmii";
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            phy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <0>;
+                            };
+                            phy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <1>;
+                            };
+                            phy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <2>;
+                            };
+                            phy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <3>;
+                            };
+                            phy4: ethernet-phy@4 {
+                                    reg = <4>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <12>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8365mb";
+                    mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+                    switch_intc2: interrupt-controller {
+                            interrupt-parent = <&gpio5>;
+                            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "swp0";
+                                    phy-handle = <&ethphy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "swp1";
+                                    phy-handle = <&ethphy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "swp2";
+                                    phy-handle = <&ethphy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "swp3";
+                                    phy-handle = <&ethphy3>;
+                            };
+                            port@6 {
+                                    reg = <6>;
+                                    ethernet = <&fec1>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                            pause;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            ethphy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <0>;
+                            };
+                            ethphy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <1>;
+                            };
+                            ethphy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <2>;
+                            };
+                            ethphy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <3>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch@29 {
+                    compatible = "realtek,rtl8365mb";
+                    reg = <29>;
+
+                    reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+
+                    switch_intc3: interrupt-controller {
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan4";
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan3";
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan1";
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    ethernet = <&ethernet>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+      };
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
new file mode 100644
index 0000000000..833d2f68da
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+  handles 4 ports + 1 CPU management port.
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-a5psw
+      - const: renesas,rzn1-a5psw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Device Level Ring (DLR) interrupt
+      - description: Switch interrupt
+      - description: Parallel Redundancy Protocol (PRP) interrupt
+      - description: Integrated HUB module interrupt
+      - description: Receive Pattern Match interrupt
+
+  interrupt-names:
+    items:
+      - const: dlr
+      - const: switch
+      - const: prp
+      - const: hub
+      - const: ptrn
+
+  power-domains:
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    items:
+      - description: AHB clock used for the switch register interface
+      - description: Switch system clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: clk
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-4]$":
+        type: object
+        description: Ethernet switch ports
+
+        properties:
+          pcs-handle:
+            maxItems: 1
+            description:
+              phandle pointing to a PCS sub-node compatible with
+              renesas,rzn1-miic.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    switch@44050000 {
+        compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+        reg = <0x44050000 0x10000>;
+        clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+        clock-names = "hclk", "clk";
+        power-domains = <&sysctrl>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "dlr", "switch", "prp", "hub", "ptrn";
+
+        dsa,member = <0 0>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                label = "lan0";
+                phy-handle = <&switch0phy3>;
+                pcs-handle = <&mii_conv4>;
+            };
+
+            port@1 {
+                reg = <1>;
+                label = "lan1";
+                phy-handle = <&switch0phy1>;
+                pcs-handle = <&mii_conv3>;
+            };
+
+            port@4 {
+                reg = <4>;
+                ethernet = <&gmac2>;
+                phy-mode = "internal";
+
+                fixed-link {
+                  speed = <1000>;
+                  full-duplex;
+                };
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+            reset-delay-us = <15>;
+            clock-frequency = <2500000>;
+
+            switch0phy1: ethernet-phy@1{
+                reg = <1>;
+            };
+
+            switch0phy3: ethernet-phy@3{
+                reg = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
new file mode 100644
index 0000000000..258bef4836
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -0,0 +1,129 @@
+Vitesse VSC73xx Switches
+========================
+
+This defines device tree bindings for the Vitesse VSC73xx switch chips.
+The Vitesse company has been acquired by Microsemi and Microsemi has
+been acquired Microchip but retains this vendor branding.
+
+The currently supported switch chips are:
+Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
+Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
+Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
+Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
+
+This switch could have two different management interface.
+
+If SPI interface is used, the device tree node is an SPI device so it must
+reside inside a SPI bus device tree node, see spi/spi-bus.txt
+
+When the chip is connected to a parallel memory bus and work in memory-mapped
+I/O mode, a platform device is used to represent the vsc73xx. In this case it
+must reside inside a platform bus device tree node.
+
+Required properties:
+
+- compatible: must be exactly one of:
+	"vitesse,vsc7385"
+	"vitesse,vsc7388"
+	"vitesse,vsc7395"
+	"vitesse,vsc7398"
+- gpio-controller: indicates that this switch is also a GPIO controller,
+  see gpio/gpio.txt
+- #gpio-cells: this must be set to <2> and indicates that we are a twocell
+  GPIO controller, see gpio/gpio.txt
+
+Optional properties:
+
+- reset-gpios: a handle to a GPIO line that can issue reset of the chip.
+  It should be tagged as active low.
+
+Required subnodes:
+
+See net/dsa/dsa.txt for a list of additional required and optional properties
+and subnodes of DSA switches.
+
+Examples:
+
+SPI:
+switch@0 {
+	compatible = "vitesse,vsc7395";
+	reg = <0>;
+	/* Specified for 2.5 MHz or below */
+	spi-max-frequency = <2500000>;
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+		vsc: port@6 {
+			reg = <6>;
+			ethernet = <&gmac1>;
+			phy-mode = "rgmii";
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+Platform:
+switch@2,0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "vitesse,vsc7385";
+	reg = <0x2 0x0 0x20000>;
+	reset-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+		vsc: port@6 {
+			reg = <6>;
+			ethernet = <&enet0>;
+			phy-mode = "rgmii";
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
new file mode 100644
index 0000000000..82a5d7927c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/engleder,tsnep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TSN endpoint Ethernet MAC
+
+maintainers:
+  - Gerhard Engleder <gerhard@engleder-embedded.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: engleder,tsnep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: txrx-1
+      - const: txrx-2
+      - const: txrx-3
+      - const: txrx-4
+      - const: txrx-5
+      - const: txrx-6
+      - const: txrx-7
+    description:
+      The main interrupt for basic MAC features and the first TX/RX queue pair
+      is named "mac". "txrx-[1-7]" are the interrupts for additional TX/RX
+      queue pairs.
+
+  dma-coherent: true
+
+  local-mac-address: true
+
+  mac-address: true
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+  phy-connection-type:
+    enum:
+      - mii
+      - gmii
+      - rgmii
+      - rgmii-id
+
+  phy-mode: true
+
+  phy-handle: true
+
+  mdio:
+    type: object
+    $ref: mdio.yaml#
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        tsnep0: ethernet@a0000000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0000000 0x0 0x10000>;
+            interrupts = <0 89 1>;
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy0: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+
+        tsnep1: ethernet@a0010000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0010000 0x0 0x10000>;
+            interrupts = <0 93 1>, <0 94 1>, <0 95 1>, <0 96 1>;
+            interrupt-names = "mac", "txrx-1", "txrx-2", "txrx-3";
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy1: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
new file mode 100644
index 0000000000..9f6a5ccbce
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -0,0 +1,289 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet Controller Common Properties
+
+maintainers:
+  - David S. Miller <davem@davemloft.net>
+
+properties:
+  $nodename:
+    pattern: "^ethernet(@.*)?$"
+
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Human readable label on a port of a box.
+
+  local-mac-address:
+    description:
+      Specifies the MAC address that was assigned to the network device.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 6
+    maxItems: 6
+
+  mac-address:
+    description:
+      Specifies the MAC address that was last used by the boot
+      program; should be used in cases where the MAC address assigned
+      to the device by the boot program is different from the
+      local-mac-address property.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 6
+    maxItems: 6
+
+  max-frame-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum transfer unit (IEEE defined MTU), rather than the
+      maximum frame size (there\'s contradiction in the Devicetree
+      Specification).
+
+  max-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specifies maximum speed in Mbit/s supported by the device.
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Reference to an nvmem node for the MAC address
+
+  nvmem-cell-names:
+    const: mac-address
+
+  phy-connection-type:
+    description:
+      Specifies interface type between the Ethernet device and a physical
+      layer (PHY) device.
+    enum:
+      # There is not a standard bus between the MAC and the PHY,
+      # something proprietary is being used to embed the PHY in the
+      # MAC.
+      - internal
+      - mii
+      - gmii
+      - sgmii
+      - psgmii
+      - qsgmii
+      - qusgmii
+      - tbi
+      - rev-mii
+      - rmii
+      - rev-rmii
+      - moca
+
+      # RX and TX delays are added by the MAC when required
+      - rgmii
+
+      # RGMII with internal RX and TX delays provided by the PHY,
+      # the MAC should not add the RX or TX delays in this case
+      - rgmii-id
+
+      # RGMII with internal RX delay provided by the PHY, the MAC
+      # should not add an RX delay in this case
+      - rgmii-rxid
+
+      # RGMII with internal TX delay provided by the PHY, the MAC
+      # should not add an TX delay in this case
+      - rgmii-txid
+      - rtbi
+      - smii
+      - xgmii
+      - trgmii
+      - 1000base-x
+      - 2500base-x
+      - 5gbase-r
+      - rxaui
+      - xaui
+
+      # 10GBASE-KR, XFI, SFI
+      - 10gbase-kr
+      - usxgmii
+      - 10gbase-r
+      - 25gbase-r
+
+  phy-mode:
+    $ref: "#/properties/phy-connection-type"
+
+  pcs-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Specifies a reference to a node representing a PCS PHY device on a MDIO
+      bus to link with an external PHY (phy-handle) if exists.
+
+  pcs-handle-names:
+    description:
+      The name of each PCS in pcs-handle.
+
+  phy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a PHY device.
+
+  phy:
+    $ref: "#/properties/phy-handle"
+    deprecated: true
+
+  phy-device:
+    $ref: "#/properties/phy-handle"
+    deprecated: true
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The size of the controller\'s receive fifo in bytes. This is used
+      for components that can have configurable receive fifo sizes,
+      and is useful for determining certain configuration settings
+      such as flow control thresholds.
+
+  sfp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a SFP cage.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The size of the controller\'s transmit fifo in bytes. This
+      is used for components that can have configurable fifo sizes.
+
+  managed:
+    description:
+      Specifies the PHY management type. If auto is set and fixed-link
+      is not specified, it uses MDIO for management.
+    $ref: /schemas/types.yaml#/definitions/string
+    default: auto
+    enum:
+      - auto
+      - in-band-status
+
+  fixed-link:
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+        items:
+          - minimum: 0
+            maximum: 31
+            description:
+              Emulated PHY ID, choose any but unique to the all
+              specified fixed-links
+
+          - enum: [0, 1]
+            description:
+              Duplex configuration. 0 for half duplex or 1 for
+              full duplex
+
+          - enum: [10, 100, 1000, 2500, 10000]
+            description:
+              Link speed in Mbits/sec.
+
+          - enum: [0, 1]
+            description:
+              Pause configuration. 0 for no pause, 1 for pause
+
+          - enum: [0, 1]
+            description:
+              Asymmetric pause configuration. 0 for no asymmetric
+              pause, 1 for asymmetric pause
+      - type: object
+        additionalProperties: false
+        properties:
+          speed:
+            description:
+              Link speed.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [10, 100, 1000, 2500, 10000]
+
+          full-duplex:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that full-duplex is used. When absent, half
+              duplex is assumed.
+
+          pause:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that pause should be enabled.
+
+          asym-pause:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that asym_pause should be enabled.
+
+          link-gpios:
+            maxItems: 1
+            description:
+              GPIO to determine if the link is up
+
+        required:
+          - speed
+
+  leds:
+    description:
+      Describes the LEDs associated by Ethernet Controller.
+      These LEDs are not integrated in the PHY and PHY doesn't have any
+      control on them. Ethernet Controller regs are used to control
+      these defined LEDs.
+
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^led@[a-f0-9]+$':
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              This define the LED index in the PHY or the MAC. It's really
+              driver dependent and required for ports that define multiple
+              LED for the same port.
+
+        required:
+          - reg
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+dependencies:
+  pcs-handle-names: [pcs-handle]
+
+allOf:
+  - if:
+      properties:
+        phy-mode:
+          contains:
+            enum:
+              - rgmii
+              - rgmii-rxid
+              - rgmii-txid
+              - rgmii-id
+    then:
+      properties:
+        rx-internal-delay-ps:
+          description:
+            RGMII Receive Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable RX internal delays. If this
+            property is present then the MAC applies the RX delay.
+        tx-internal-delay-ps:
+          description:
+            RGMII Transmit Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable TX internal delays. If this
+            property is present then the MAC applies the TX delay.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
new file mode 100644
index 0000000000..8fb2a6ee7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Common Properties
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+# The dt-schema tools will generate a select statement first by using
+# the compatible, and second by using the node name if any. In our
+# case, the node name is the one we want to match on, while the
+# compatible is optional.
+select:
+  properties:
+    $nodename:
+      pattern: "^ethernet-phy(@[a-f0-9]+)?$"
+
+  required:
+    - $nodename
+
+properties:
+  $nodename:
+    pattern: "^ethernet-phy(@[a-f0-9]+)?$"
+
+  compatible:
+    oneOf:
+      - const: ethernet-phy-ieee802.3-c22
+        description: PHYs that implement IEEE802.3 clause 22
+      - const: ethernet-phy-ieee802.3-c45
+        description: PHYs that implement IEEE802.3 clause 45
+      - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+        description:
+          If the PHY reports an incorrect ID (or none at all) then the
+          compatible list may contain an entry with the correct PHY ID
+          in the above form.
+          The first group of digits is the 16 bit Phy Identifier 1
+          register, this is the chip vendor OUI bits 3:18. The
+          second group of digits is the Phy Identifier 2 register,
+          this is the chip vendor OUI bits 19:24, followed by 10
+          bits of a vendor specific ID.
+      - items:
+          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+          - const: ethernet-phy-ieee802.3-c22
+      - items:
+          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+          - const: ethernet-phy-ieee802.3-c45
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description:
+      The ID number for the PHY.
+
+  interrupts:
+    maxItems: 1
+
+  max-speed:
+    enum:
+      - 10
+      - 100
+      - 1000
+      - 2500
+      - 5000
+      - 10000
+      - 20000
+      - 25000
+      - 40000
+      - 50000
+      - 56000
+      - 100000
+      - 200000
+    description:
+      Maximum PHY supported speed in Mbits / seconds.
+
+  phy-10base-t1l-2.4vpp:
+    description: |
+      tristate, request/disable 2.4 Vpp operating mode. The values are:
+      0: Disable 2.4 Vpp operating mode.
+      1: Request 2.4 Vpp operating mode from link partner.
+      Absence of this property will leave configuration to default values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  broken-turn-around:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates the PHY device does not correctly release
+      the turn around line low at end of the control phase of the
+      MDIO transaction.
+
+  clocks:
+    maxItems: 1
+    description:
+      External clock connected to the PHY. If not specified it is assumed
+      that the PHY uses a fixed crystal or an internal oscillator.
+
+  enet-phy-lane-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates the PHY will swap the TX/RX lanes to
+      compensate for the board being designed with the lanes
+      swapped.
+
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correctly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
+  eee-broken-100tx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the corresponding energy efficient ethernet mode as
+      broken and request the ethernet to stop advertising it.
+
+  eee-broken-1000t:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the corresponding energy efficient ethernet mode as
+      broken and request the ethernet to stop advertising it.
+
+  eee-broken-10gt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the corresponding energy efficient ethernet mode as
+      broken and request the ethernet to stop advertising it.
+
+  eee-broken-1000kx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the corresponding energy efficient ethernet mode as
+      broken and request the ethernet to stop advertising it.
+
+  eee-broken-10gkx4:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the corresponding energy efficient ethernet mode as
+      broken and request the ethernet to stop advertising it.
+
+  eee-broken-10gkr:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the corresponding energy efficient ethernet mode as
+      broken and request the ethernet to stop advertising it.
+
+  pses:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      Specifies a reference to a node representing a Power Sourcing Equipment.
+
+  phy-is-integrated:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that the PHY is integrated into the same
+      physical package as the Ethernet MAC. If needed, muxers
+      should be configured to ensure the integrated PHY is
+      used. The absence of this property indicates the muxers
+      should be configured so that the external PHY is used.
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      The GPIO phandle and specifier for the PHY reset signal.
+
+  reset-assert-us:
+    description:
+      Delay after the reset was asserted in microseconds. If this
+      property is missing the delay will be skipped.
+
+  reset-deassert-us:
+    description:
+      Delay after the reset was deasserted in microseconds. If
+      this property is missing the delay will be skipped.
+
+  sfp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a SFP cage.
+
+  rx-internal-delay-ps:
+    description: |
+      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable RX internal delays.  If this property is
+      present then the PHY applies the RX delay.
+
+  tx-internal-delay-ps:
+    description: |
+      RGMII Transmit PHY Clock Delay defined in pico seconds.  This is used for
+      PHY's that have configurable TX internal delays. If this property is
+      present then the PHY applies the TX delay.
+
+  leds:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^led@[a-f0-9]+$':
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              This define the LED index in the PHY or the MAC. It's really
+              driver dependent and required for ports that define multiple
+              LED for the same port.
+
+        required:
+          - reg
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
+            interrupt-parent = <&PIC>;
+            interrupts = <35 1>;
+            reg = <0>;
+
+            resets = <&rst 8>;
+            reset-names = "phy";
+            reset-gpios = <&gpio1 4 1>;
+            reset-assert-us = <1000>;
+            reset-deassert-us = <2000>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function = LED_FUNCTION_LAN;
+                    default-state = "keep";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
new file mode 100644
index 0000000000..d5cf7e40e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch Port
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  An Ethernet switch port is a component of a switch that manages one MAC, and
+  can pass Ethernet frames.
+
+$ref: ethernet-controller.yaml#
+
+properties:
+  reg:
+    description: Port number
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
new file mode 100644
index 0000000000..f1b9075dc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  Ethernet switches are multi-port Ethernet controllers. Each port has
+  its own number and is represented as its own Ethernet controller.
+  The minimum required functionality is to pass packets to software.
+  They may or may not be able to forward packets automonously between
+  ports.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^(ethernet-)?switch(@.*)?$"
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+        description: Ethernet switch ports
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+additionalProperties: true
+
+$defs:
+  base:
+    description: An ethernet switch without any extra port properties
+    $ref: '#'
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        description: Ethernet switch ports
+        $ref: ethernet-switch-port.yaml#
+        unevaluatedProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
new file mode 100644
index 0000000000..5df413d01b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -0,0 +1 @@
+This file has moved to ethernet-controller.yaml.
diff --git a/Documentation/devicetree/bindings/net/ezchip_enet.txt b/Documentation/devicetree/bindings/net/ezchip_enet.txt
new file mode 100644
index 0000000000..4e29b2b828
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ezchip_enet.txt
@@ -0,0 +1,15 @@
+* EZchip NPS Management Ethernet port driver
+
+Required properties:
+- compatible: Should be "ezchip,nps-mgt-enet"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the ENET interrupt
+
+Examples:
+
+	ethernet@f0003000 {
+		compatible = "ezchip,nps-mgt-enet";
+		reg = <0xf0003000 0x44>;
+		interrupts = <7>;
+		mac-address = [ 00 11 22 33 44 55 ];
+	};
diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
new file mode 100644
index 0000000000..9bcbacb664
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGMAC100 gigabit ethernet controller
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Po-Yu Chuang <ratbert@faraday-tech.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftgmac100
+      - items:
+          - enum:
+              - aspeed,ast2400-mac
+              - aspeed,ast2500-mac
+              - aspeed,ast2600-mac
+          - const: faraday,ftgmac100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: MAC IP clock
+      - description: RMII RCLK gate for AST2500/2600
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: MACCLK
+      - const: RCLK
+
+  phy-mode:
+    enum:
+      - rgmii
+      - rmii
+
+  phy-handle: true
+
+  use-ncsi:
+    description:
+      Use the NC-SI stack instead of an MDIO PHY. Currently assumes
+      rmii (100bT) but kept as a separate property in case NC-SI grows support
+      for a gigabit link.
+    type: boolean
+
+  no-hw-checksum:
+    description:
+      Used to disable HW checksum support. Here for backward
+      compatibility as the driver now should have correct defaults based on
+      the SoC.
+    type: boolean
+    deprecated: true
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@1e660000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e660000 0x180>;
+        interrupts = <2>;
+        use-ncsi;
+    };
+
+    ethernet@1e680000 {
+        compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+        reg = <0x1e680000 0x180>;
+        interrupts = <2>;
+
+        phy-handle = <&phy>;
+        phy-mode = "rgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/faraday,ftmac.txt b/Documentation/devicetree/bindings/net/faraday,ftmac.txt
new file mode 100644
index 0000000000..be4f55e23b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/faraday,ftmac.txt
@@ -0,0 +1,24 @@
+Faraday Ethernet Controller
+
+Required properties:
+
+- compatible : Must contain "faraday,ftmac", as well as one of
+		the SoC specific identifiers:
+		"andestech,atmac100"
+		"moxa,moxart-mac"
+- reg : Should contain register location and length
+- interrupts : Should contain the mac interrupt number
+
+Example:
+
+	mac0: mac@90900000 {
+		compatible = "moxa,moxart-mac";
+		reg =	<0x90900000 0x100>;
+		interrupts = <25 0>;
+	};
+
+	mac1: mac@92000000 {
+		compatible = "moxa,moxart-mac";
+		reg =	<0x92000000 0x100>;
+		interrupts = <27 0>;
+	};
diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt
new file mode 100644
index 0000000000..5df413d01b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fixed-link.txt
@@ -0,0 +1 @@
+This file has moved to ethernet-controller.yaml.
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
new file mode 100644
index 0000000000..b494e00932
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Fast Ethernet Controller (FEC)
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Wei Fang <wei.fang@nxp.com>
+  - NXP Linux Team <linux-imx@nxp.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx25-fec
+          - fsl,imx27-fec
+          - fsl,imx28-fec
+          - fsl,imx6q-fec
+          - fsl,mvf600-fec
+          - fsl,s32v234-fec
+      - items:
+          - enum:
+              - fsl,imx53-fec
+              - fsl,imx6sl-fec
+          - const: fsl,imx25-fec
+      - items:
+          - enum:
+              - fsl,imx35-fec
+              - fsl,imx51-fec
+          - const: fsl,imx27-fec
+      - items:
+          - enum:
+              - fsl,imx6ul-fec
+              - fsl,imx6sx-fec
+          - const: fsl,imx6q-fec
+      - items:
+          - enum:
+              - fsl,imx7d-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - const: fsl,imx8mq-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8mm-fec
+              - fsl,imx8mn-fec
+              - fsl,imx8mp-fec
+              - fsl,imx93-fec
+          - const: fsl,imx8mq-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - const: fsl,imx8qm-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8qxp-fec
+          - const: fsl,imx8qm-fec
+          - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8ulp-fec
+          - const: fsl,imx6ul-fec
+          - const: fsl,imx6q-fec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: int0
+      - items:
+          - const: int0
+          - const: pps
+      - items:
+          - const: int0
+          - const: int1
+          - const: int2
+      - items:
+          - const: int0
+          - const: int1
+          - const: int2
+          - const: pps
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+    description:
+      The "ipg", for MAC ipg_clk_s, ipg_clk_mac_s that are for register accessing.
+      The "ahb", for MAC ipg_clk, ipg_clk_mac that are bus clock.
+      The "ptp"(option), for IEEE1588 timer clock that requires the clock.
+      The "enet_clk_ref"(option), for MAC transmit/receiver reference clock like
+      RGMII TXC clock or RMII reference clock. It depends on board design,
+      the clock is required if RGMII TXC and RMII reference clock source from
+      SOC internal PLL.
+      The "enet_out"(option), output clock for external device, like supply clock
+      for PHY. The clock is required if PHY clock source from SOC.
+      The "enet_2x_txclk"(option), for RGMII sampling clock which fixed at 250Mhz.
+      The clock is required if SoC RGMII enable clock delay.
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      enum:
+        - ipg
+        - ahb
+        - ptp
+        - enet_clk_ref
+        - enet_out
+        - enet_2x_txclk
+
+  phy-mode: true
+
+  phy-handle: true
+
+  fixed-link: true
+
+  local-mac-address: true
+
+  mac-address: true
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+  rx-internal-delay-ps:
+    enum: [0, 2000]
+
+  phy-supply:
+    description:
+      Regulator that powers the Ethernet PHY.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,num-tx-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The property is valid for enet-avb IP, which supports hw multi queues.
+      Should specify the tx queue number, otherwise set tx queue number to 1.
+    enum: [1, 2, 3]
+
+  fsl,num-rx-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The property is valid for enet-avb IP, which supports hw multi queues.
+      Should specify the rx queue number, otherwise set rx queue number to 1.
+    enum: [1, 2, 3]
+
+  fsl,magic-packet:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, indicates that the hardware supports waking up via magic packet.
+
+  fsl,err006687-workaround-present:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present indicates that the system has the hardware workaround for
+      ERR006687 applied and does not need a software workaround.
+
+  fsl,stop-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to general purpose register node
+          - description: the gpr register offset for ENET stop request
+          - description: the gpr bit offset for ENET stop request
+    description:
+      Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Specifies the mdio bus in the FEC, used as a container for phy nodes.
+
+  # Deprecated optional properties:
+  # To avoid these, create a phy node according to ethernet-phy.yaml in the same
+  # directory, and point the FEC's "phy-handle" property to it. Then use
+  # the phy's reset binding, again described by ethernet-phy.yaml.
+
+  phy-reset-gpios:
+    deprecated: true
+    description:
+      Should specify the gpio for phy reset.
+
+  phy-reset-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Reset duration in milliseconds.  Should present only if property
+      "phy-reset-gpios" is available.  Missing the property will have the
+      duration be 1 millisecond.  Numbers greater than 1000 are invalid
+      and 1 millisecond will be used instead.
+
+  phy-reset-active-high:
+    type: boolean
+    deprecated: true
+    description:
+      If present then the reset sequence using the GPIO specified in the
+      "phy-reset-gpios" property is reversed (H=reset state, L=operation state).
+
+  phy-reset-post-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
+      milliseconds will be observed after the phy-reset-gpios has been toggled.
+      Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
+      Other delays are invalid.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# FIXME: We had better set additionalProperties to false to avoid invalid or at
+# least undocumented properties. However, PHY may have a deprecated option to
+# place PHY OF properties in the MAC node, such as Micrel PHY, and we can find
+# these boards which is based on i.MX6QDL.
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@83fec000 {
+      compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+      reg = <0x83fec000 0x4000>;
+      interrupts = <87>;
+      phy-mode = "mii";
+      phy-reset-gpios = <&gpio2 14 0>;
+      phy-supply = <&reg_fec_supply>;
+    };
+
+    ethernet@83fed000 {
+      compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+      reg = <0x83fed000 0x4000>;
+      interrupts = <87>;
+      phy-mode = "mii";
+      phy-reset-gpios = <&gpio2 14 0>;
+      phy-supply = <&reg_fec_supply>;
+      phy-handle = <&ethphy0>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethphy0: ethernet-phy@0 {
+          compatible = "ethernet-phy-ieee802.3-c22";
+          reg = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
new file mode 100644
index 0000000000..c80c880a9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FMan MAC
+
+maintainers:
+  - Madalin Bucur <madalin.bucur@nxp.com>
+
+description: |
+  Each FMan has several MACs, each implementing an Ethernet interface. Earlier
+  versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for
+  10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller
+  (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate
+  Ethernet Media Access Controller (mEMAC) to handle all speeds.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-dtsec
+      - fsl,fman-xgec
+      - fsl,fman-memac
+
+  cell-index:
+    maximum: 64
+    description: |
+      FManV2:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16]              XGEC            8
+      FM_EPI[16+n]            dTSECn          n-1
+      FM_NPI[11+n]            dTSECn          n-1
+              n = 1,..,5
+
+      FManV3:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16+n]            mEMACn          n-1
+      FM_EPI[25]              mEMAC10         9
+
+      FM_NPI[11+n]            mEMACn          n-1
+      FM_NPI[10]              mEMAC10         9
+      FM_NPI[11]              mEMAC9          8
+              n = 1,..8
+
+      FM_EPI and FM_NPI are located in the FMan memory map.
+
+      2. SoC registers:
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]           FMan            MAC             cell
+                              Unit                            index
+      ============================================================
+      DCFG_DEVDISR2[7]        1               XGEC            8
+      DCFG_DEVDISR2[7+n]      1               dTSECn          n-1
+      DCFG_DEVDISR2[15]       2               XGEC            8
+      DCFG_DEVDISR2[15+n]     2               dTSECn          n-1
+              n = 1,..5
+
+      - T1040, T2080, T4240, B4860:
+      register[bit]                   FMan    MAC             cell
+                                      Unit                    index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[n-1]         1       mEMACn          n-1
+      DCFG_CCSR_DEVDISR2[11+n]        2       mEMACn          n-1
+              n = 1,..6,9,10
+
+      EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    maxItems: 1
+
+  fsl,fman-ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 2
+    description: |
+      An array of two references: the first is the FMan RX port and the second
+      is the TX port used by this MAC.
+
+  ptp-timer:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the IEEE1588 timer
+
+  phys:
+    description: A reference to the SerDes lane(s)
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: serdes
+
+  pcsphy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 3
+    deprecated: true
+    description: See pcs-handle.
+
+  pcs-handle:
+    minItems: 1
+    maxItems: 3
+    description: |
+      A reference to the various PCSs (typically found on the SerDes). If
+      pcs-handle-names is absent, and phy-connection-type is "xgmii", then the first
+      reference will be assumed to be for "xfi". Otherwise, if pcs-handle-names is
+      absent, then the first reference will be assumed to be for "sgmii".
+
+  pcs-handle-names:
+    minItems: 1
+    maxItems: 3
+    items:
+      enum:
+        - sgmii
+        - qsgmii
+        - xfi
+    description: The type of each PCS in pcsphy-handle.
+
+  tbi-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the (TBI-based) PCS
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - fsl,fman-ports
+  - ptp-timer
+
+dependencies:
+  pcs-handle-names:
+    - pcs-handle
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,fman-dtsec
+    then:
+      required:
+        - tbi-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+            ptp-timer = <&ptp_timer>;
+            tbi-handle = <&tbi0>;
+    };
+  - |
+    ethernet@e8000 {
+            cell-index = <4>;
+            compatible = "fsl,fman-memac";
+            reg = <0xe8000 0x1000>;
+            fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+            ptp-timer = <&ptp_timer0>;
+            pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+            pcs-handle-names = "sgmii", "qsgmii";
+            phys = <&serdes1 1>;
+            phy-names = "serdes";
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
new file mode 100644
index 0000000000..a1b71b3531
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPAA2 MAC
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+description:
+  This binding represents the DPAA2 MAC objects found on the fsl-mc bus and
+  located under the 'dpmacs' node for the fsl-mc bus DTS node.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: fsl,qoriq-mc-dpmac
+
+  reg:
+    maxItems: 1
+    description: The DPMAC number
+
+  phy-handle: true
+
+  phy-connection-type: true
+
+  phy-mode: true
+
+  pcs-handle:
+    maxItems: 1
+    description:
+      A reference to a node representing a PCS PHY device found on
+      the internal MDIO bus.
+
+  managed: true
+
+required:
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dpmacs {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ethernet@4 {
+        compatible = "fsl,qoriq-mc-dpmac";
+        reg = <0x4>;
+        phy-handle = <&mdio1_phy6>;
+        phy-connection-type = "qsgmii";
+        managed = "in-band-status";
+        pcs-handle = <&pcs3_1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
new file mode 100644
index 0000000000..9b9a3f197e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -0,0 +1,119 @@
+* ENETC ethernet device tree bindings
+
+Depending on board design and ENETC port type (internal or
+external) there are two supported link modes specified by
+below device tree bindings.
+
+Required properties:
+
+- reg		: Specifies PCIe Device Number and Function
+		  Number of the ENETC endpoint device, according
+		  to parent node bindings.
+- compatible	: Should be "fsl,enetc".
+
+1. The ENETC external port is connected to a MDIO configurable phy
+
+1.1. Using the local ENETC Port MDIO interface
+
+In this case, the ENETC node should include a "mdio" sub-node
+that in turn should contain the "ethernet-phy" node describing the
+external phy.  Below properties are required, their bindings
+already defined in Documentation/devicetree/bindings/net/ethernet.txt or
+Documentation/devicetree/bindings/net/phy.txt.
+
+Required:
+
+- phy-handle		: Phandle to a PHY on the MDIO bus.
+			  Defined in ethernet.txt.
+
+- phy-connection-type	: Defined in ethernet.txt.
+
+- mdio			: "mdio" node, defined in mdio.txt.
+
+- ethernet-phy		: "ethernet-phy" node, defined in phy.txt.
+
+Example:
+
+	ethernet@0,0 {
+		compatible = "fsl,enetc";
+		reg = <0x000000 0 0 0 0>;
+		phy-handle = <&sgmii_phy0>;
+		phy-connection-type = "sgmii";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			sgmii_phy0: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+	};
+
+1.2. Using the central MDIO PCIe endpoint device
+
+In this case, the mdio node should be defined as another PCIe
+endpoint node, at the same level with the ENETC port nodes.
+
+Required properties:
+
+- reg		: Specifies PCIe Device Number and Function
+		  Number of the ENETC endpoint device, according
+		  to parent node bindings.
+- compatible	: Should be "fsl,enetc-mdio".
+
+The remaining required mdio bus properties are standard, their bindings
+already defined in Documentation/devicetree/bindings/net/mdio.txt.
+
+Example:
+
+	ethernet@0,0 {
+		compatible = "fsl,enetc";
+		reg = <0x000000 0 0 0 0>;
+		phy-handle = <&sgmii_phy0>;
+		phy-connection-type = "sgmii";
+	};
+
+	mdio@0,3 {
+		compatible = "fsl,enetc-mdio";
+		reg = <0x000300 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sgmii_phy0: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+	};
+
+2. The ENETC port is an internal port or has a fixed-link external
+connection
+
+In this case, the ENETC port node defines a fixed link connection,
+as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
+
+Required:
+
+- fixed-link	: "fixed-link" node, defined in "fixed-link.txt".
+
+Example:
+	ethernet@0,2 {
+		compatible = "fsl,enetc";
+		reg = <0x000200 0 0 0 0>;
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
+
+* Integrated Endpoint Register Block bindings
+
+Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
+Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
+with the following properties:
+
+- reg		: Specifies the address in the SoC memory space.
+- compatible	: Must be "fsl,ls1028a-enetc-ierb".
+
+Example:
+	ierb@1f0800000 {
+		compatible = "fsl,ls1028a-enetc-ierb";
+		reg = <0x01 0xf0800000 0x0 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
new file mode 100644
index 0000000000..bda4b41af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -0,0 +1,548 @@
+=============================================================================
+Freescale Frame Manager Device Bindings
+
+CONTENTS
+  - FMan Node
+  - FMan Port Node
+  - FMan MURAM Node
+  - FMan dTSEC/XGEC/mEMAC Node
+  - FMan IEEE 1588 Node
+  - FMan MDIO Node
+  - Example
+
+=============================================================================
+FMan Node
+
+DESCRIPTION
+
+Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+etc.) the FMan node will have child nodes for each of them.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,fman"
+		FMan version can be determined via FM_IP_REV_1 register in the
+		FMan block. The offset is 0xc4 from the beginning of the
+		Frame Processing Manager memory map (0xc3000 from the
+		beginning of the FMan node).
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the index of the FMan unit.
+
+		The cell-index value may be used by the SoC, to identify the
+		FMan unit in the SoC memory map. In the table below,
+		there's a description of the cell-index use in each SoC:
+
+		- P1023:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DEVDISR[1]			1		0
+
+		- P2041, P3041, P4080 P5020, P5040:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DCFG_DEVDISR2[6]		1		0
+		DCFG_DEVDISR2[14]		2		1
+			(Second FM available only in P4080 and P5040)
+
+		- B4860, T1040, T2080, T4240:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DCFG_CCSR_DEVDISR2[24]		1		0
+		DCFG_CCSR_DEVDISR2[25]		2		1
+			(Second FM available only in T4240)
+
+		DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+		the specific SoC "Device Configuration/Pin Control" Memory
+		Map.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Specifies the offset of the
+		following configuration registers:
+		- BMI configuration registers.
+		- QMI configuration registers.
+		- DMA configuration registers.
+		- FPM configuration registers.
+		- FMan controller configuration registers.
+
+- ranges
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- clocks
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: phandle for the fman input clock.
+
+- clock-names
+		usage: required
+		Value type: <stringlist>
+		Definition: "fmanclk" for the fman input clock.
+
+- interrupts
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A pair of IRQs are specified in this property.
+		The first element is associated with the event interrupts and
+		the second element is associated with the error interrupts.
+
+- fsl,qman-channel-range
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: Specifies the range of the available dedicated
+		channels in the FMan. The first cell specifies the beginning
+		of the range and the second cell specifies the number of
+		channels.
+		Further information available at:
+		"Work Queue (WQ) Channel Assignments in the QMan" section
+		in DPAA Reference Manual.
+
+- fsl,qman
+- fsl,bman
+		Usage: required
+		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
+
+- fsl,erratum-a050385
+		Usage: optional
+		Value type: boolean
+		Definition: A boolean property. Indicates the presence of the
+		erratum A050385 which indicates that DMA transactions that are
+		split can result in a FMan lock.
+
+=============================================================================
+FMan MURAM Node
+
+DESCRIPTION
+
+FMan Internal memory - shared between all the FMan modules.
+It contains data structures that are common and written to or read by
+the modules.
+FMan internal memory is split into the following parts:
+	Packet buffering (Tx/Rx FIFOs)
+	Frames internal context
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,fman-muram"
+
+- ranges
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the multi-user memory offset and the size within
+		the FMan.
+
+EXAMPLE
+
+muram@0 {
+	compatible = "fsl,fman-muram";
+	ranges = <0 0x000000 0x28000>;
+};
+
+=============================================================================
+FMan Port Node
+
+DESCRIPTION
+
+The Frame Manager (FMan) supports several types of hardware ports:
+	Ethernet receiver (RX)
+	Ethernet transmitter (TX)
+	Offline/Host command (O/H)
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include one of the following:
+			- "fsl,fman-v2-port-oh" for FManV2 OH ports
+			- "fsl,fman-v2-port-rx" for FManV2 RX ports
+			- "fsl,fman-v2-port-tx" for FManV2 TX ports
+			- "fsl,fman-v3-port-oh" for FManV3 OH ports
+			- "fsl,fman-v3-port-rx" for FManV3 RX ports
+			- "fsl,fman-v3-port-tx" for FManV3 TX ports
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the hardware port id.
+		Each hardware port on the FMan has its own hardware PortID.
+		Super set of all hardware Port IDs available at FMan Reference
+		Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+		Each hardware port is assigned a 4KB, port-specific page in
+		the FMan hardware port memory region (which is part of the
+		FMan memory map). The first 4 KB in the FMan hardware ports
+		memory region is used for what are called common registers.
+		The subsequent 63 4KB pages are allocated to the hardware
+		ports.
+		The page of a specific port is determined by the cell-index.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: There is one reg region describing the port
+		configuration registers.
+
+- fsl,fman-10g-port
+		Usage: optional
+		Value type: boolean
+		Definition: The default port rate is 1G.
+		If this property exists, the port is s 10G port.
+
+- fsl,fman-best-effort-port
+		Usage: optional
+		Value type: boolean
+		Definition: Can be defined only if 10G-support is set.
+		This property marks a best-effort 10G port (10G port that
+		may not be capable of line rate).
+
+EXAMPLE
+
+port@a8000 {
+	cell-index = <0x28>;
+	compatible = "fsl,fman-v2-port-tx";
+	reg = <0xa8000 0x1000>;
+};
+
+port@88000 {
+	cell-index = <0x8>;
+	compatible = "fsl,fman-v2-port-rx";
+	reg = <0x88000 0x1000>;
+};
+
+port@81000 {
+	cell-index = <0x1>;
+	compatible = "fsl,fman-v2-port-oh";
+	reg = <0x81000 0x1000>;
+};
+
+=============================================================================
+FMan dTSEC/XGEC/mEMAC Node
+
+Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
+
+============================================================================
+FMan IEEE 1588 Node
+
+Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+
+=============================================================================
+FMan MDIO Node
+
+DESCRIPTION
+
+The MDIO is a bus to which the PHY devices are connected.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+		FMan v3.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- clocks
+		Usage: optional
+		Value type: <phandle>
+		Definition: A reference to the input clock of the controller
+		from which the MDC frequency is derived.
+
+- clock-frequency
+		Usage: optional
+		Value type: <u32>
+		Definition: Specifies the external MDC frequency, in Hertz, to
+		be used. Requires that the input clock is specified in the
+		"clocks" property. See also: mdio.yaml.
+
+- suppress-preamble
+		Usage: optional
+		Value type: <boolean>
+		Definition: Disable generation of preamble bits. See also:
+		mdio.yaml.
+
+- interrupts
+		Usage: required for external MDIO
+		Value type: <prop-encoded-array>
+		Definition: Event interrupt of external MDIO controller.
+
+- fsl,fman-internal-mdio
+		Usage: required for internal MDIO
+		Value type: boolean
+		Definition: Fman has internal MDIO for internal PCS(Physical
+		Coding Sublayer) PHYs and external MDIO for external PHYs.
+		The settings and programming routines for internal/external
+		MDIO are different. Must be included for internal MDIO.
+
+- fsl,erratum-a009885
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A009885
+		erratum describing that the contents of MDIO_DATA may
+		become corrupt unless it is read within 16 MDC cycles
+		of MDIO_CFG[BSY] being cleared, when performing an
+		MDIO read operation.
+
+- fsl,erratum-a011043
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A011043 erratum
+		describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
+		set when reading internal PCS registers. MDIO reads to
+		internal PCS registers may result in having the
+		MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
+		read data (MDIO_DATA[MDIO_DATA]) is correct.
+		Software may get false read error when reading internal
+		PCS registers through MDIO. As a workaround, all internal
+		MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
+
+For internal PHY device on internal mdio bus, a PHY node should be created.
+See the definition of the PHY node in booting-without-of.txt for an
+example of how to define a PHY (Internal PHY has no interrupt line).
+- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
+  The PCS PHY address should correspond to the value of the appropriate
+  MDEV_PORT.
+
+EXAMPLE
+
+Example for FMan v2 external MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-xmdio";
+	reg = <0xf1000 0x1000>;
+	interrupts = <101 2 0 0>;
+};
+
+Example for FMan v2 internal MDIO:
+
+mdio@e3120 {
+	compatible = "fsl,fman-mdio";
+	reg = <0xe3120 0xee0>;
+	fsl,fman-internal-mdio;
+
+	tbi1: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+Example for FMan v3 internal MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-memac-mdio";
+	reg = <0xf1000 0x1000>;
+	fsl,fman-internal-mdio;
+
+	pcsphy6: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+=============================================================================
+Example
+
+fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman"
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	clocks = <&fman_clk>;
+	clock-names = "fmanclk";
+	interrupts = <
+		96 2 0 0
+		16 2 1 1>;
+	fsl,qman-channel-range = <0x40 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	port@81000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	port@82000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	port@83000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	port@84000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	port@85000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	port@86000 {
+		cell-index = <6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_rx_0x8: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_rx_0x9: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_rx_0xa: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_rx_0xb: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_rx_0xc: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac0000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <0>;
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
+	};
+
+	ethernet@e2000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <1>;
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
+	};
+
+	ethernet@e4000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <2>;
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
+	};
+
+	ethernet@e6000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <3>;
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
+	};
+
+	ethernet@e8000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <4>;
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
+
+	ethernet@f0000 {
+		cell-index = <8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+
+	mdio@f1000 {
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
new file mode 100644
index 0000000000..047bdf7bdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -0,0 +1,89 @@
+* MDIO IO device
+
+The MDIO is a bus to which the PHY devices are connected.  For each
+device that exists on this bus, a child node should be created.  See
+the definition of the PHY node in booting-without-of.txt for an example
+of how to define a PHY.
+
+Required properties:
+  - reg : Offset and length of the register set for the device, and optionally
+          the offset and length of the TBIPA register (TBI PHY address
+	  register).  If TBIPA register is not specified, the driver will
+	  attempt to infer it from the register set specified (your mileage may
+	  vary).
+  - compatible : Should define the compatible device type for the
+    mdio. Currently supported strings/devices are:
+	- "fsl,gianfar-tbi"
+	- "fsl,gianfar-mdio"
+	- "fsl,etsec2-tbi"
+	- "fsl,etsec2-mdio"
+	- "fsl,ucc-mdio"
+	- "fsl,fman-mdio"
+    When device_type is "mdio", the following strings are also considered:
+	- "gianfar"
+	- "ucc_geth_phy"
+
+Example:
+
+	mdio@24520 {
+		reg = <24520 20>;
+		compatible = "fsl,gianfar-mdio";
+
+		ethernet-phy@0 {
+			......
+		};
+	};
+
+* TBI Internal MDIO bus
+
+As of this writing, every tsec is associated with an internal TBI PHY.
+This PHY is accessed through the local MDIO bus.  These buses are defined
+similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
+The TBI PHYs underneath them are similar to normal PHYs, but the reg property
+is considered instructive, rather than descriptive.  The reg property should
+be chosen so it doesn't interfere with other PHYs on the bus.
+
+* Gianfar-compatible ethernet nodes
+
+Properties:
+
+  - device_type : Should be "network"
+  - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
+  - compatible : Should be "gianfar"
+  - reg : Offset and length of the register set for the device
+  - interrupts : For FEC devices, the first interrupt is the device's
+    interrupt.  For TSEC and eTSEC devices, the first interrupt is
+    transmit, the second is receive, and the third is error.
+  - phy-handle : See ethernet.txt file in the same directory.
+  - fixed-link : See fixed-link.txt in the same directory.
+  - phy-connection-type : See ethernet.txt file in the same directory.
+    This property is only really needed if the connection is of type
+    "rgmii-id", as all other connection types are detected by hardware.
+  - fsl,magic-packet : If present, indicates that the hardware supports
+    waking up via magic packet.
+  - fsl,wake-on-filer : If present, indicates that the hardware supports
+    waking up by Filer General Purpose Interrupt (FGPI) asserted on the
+    Rx int line.  This is an advanced power management capability allowing
+    certain packet types (user) defined by filer rules to wake up the system.
+  - bd-stash : If present, indicates that the hardware supports stashing
+    buffer descriptors in the L2.
+  - rx-stash-len : Denotes the number of bytes of a received buffer to stash
+    in the L2.
+  - rx-stash-idx : Denotes the index of the first byte from the received
+    buffer to stash in the L2.
+
+Example:
+	ethernet@24000 {
+		device_type = "network";
+		model = "TSEC";
+		compatible = "gianfar";
+		reg = <0x24000 0x1000>;
+		local-mac-address = [ 00 E0 0C 00 73 00 ];
+		interrupts = <29 2 30 2 34 2>;
+		interrupt-parent = <&mpic>;
+		phy-handle = <&phy0>
+	};
+
+* Gianfar PTP clock nodes
+
+Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt b/Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt
new file mode 100644
index 0000000000..23a39a309d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt
@@ -0,0 +1,22 @@
+Hisilicon Fast Ethernet MDIO Controller interface
+
+Required properties:
+- compatible: should be "hisilicon,hisi-femac-mdio".
+- reg: address and length of the register set for the device.
+- clocks: A phandle to the reference clock for this device.
+
+- PHY subnode: inherits from phy binding [1]
+[1] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+mdio: mdio@10091100 {
+	compatible = "hisilicon,hisi-femac-mdio";
+	reg = <0x10091100 0x10>;
+	clocks = <&crg HI3516CV300_MDIO_CLK>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy0: phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac.txt b/Documentation/devicetree/bindings/net/hisilicon-femac.txt
new file mode 100644
index 0000000000..5f96976f3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-femac.txt
@@ -0,0 +1,41 @@
+Hisilicon Fast Ethernet MAC controller
+
+Required properties:
+- compatible: should contain one of the following version strings:
+	* "hisilicon,hisi-femac-v1"
+	* "hisilicon,hisi-femac-v2"
+	and the soc string "hisilicon,hi3516cv300-femac".
+- reg: specifies base physical address(s) and size of the device registers.
+  The first region is the MAC core register base and size.
+  The second region is the global MAC control register.
+- interrupts: should contain the MAC interrupt.
+- clocks: A phandle to the MAC main clock.
+- resets: should contain the phandle to the MAC reset signal(required) and
+	the PHY reset signal(optional).
+- reset-names: should contain the reset signal name "mac"(required)
+	and "phy"(optional).
+- phy-mode: see ethernet.txt [1].
+- phy-handle: see ethernet.txt [1].
+- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
+	The 1st cell is reset pre-delay in micro seconds.
+	The 2nd cell is reset pulse in micro seconds.
+	The 3rd cell is reset post-delay in micro seconds.
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt[1].
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+
+Example:
+	hisi_femac: ethernet@10090000 {
+		compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2";
+		reg = <0x10090000 0x1000>,<0x10091300 0x200>;
+		interrupts = <12>;
+		clocks = <&crg HI3518EV200_ETH_CLK>;
+		resets = <&crg 0xec 0>,<&crg 0xec 3>;
+		reset-names = "mac","phy";
+		mac-address = [00 00 00 00 00 00];
+		phy-mode = "mii";
+		phy-handle = <&phy0>;
+		hisilicon,phy-reset-delays-us = <10000 20000 20000>;
+	};
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
new file mode 100644
index 0000000000..464c0dafc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
@@ -0,0 +1,89 @@
+Hisilicon hip04 Ethernet Controller
+
+* Ethernet controller node
+
+Required properties:
+- compatible: should be "hisilicon,hip04-mac".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- port-handle: <phandle port channel>
+	phandle, specifies a reference to the syscon ppe node
+	port, port number connected to the controller
+	channel, recv channel start from channel * number (RX_DESC_NUM)
+	group, field in the pkg desc, in general, it is the same as the port.
+- phy-mode: see ethernet.txt [1].
+
+Optional properties:
+- phy-handle: see ethernet.txt [1].
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+
+
+* Ethernet ppe node:
+Control rx & tx fifos of all ethernet controllers.
+Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
+Each controller's recv channel start from channel * number (RX_DESC_NUM).
+
+Required properties:
+- compatible: "hisilicon,hip04-ppe", "syscon".
+- reg: address and length of the register set for the device.
+
+
+* MDIO bus node:
+
+Required properties:
+
+- compatible: should be "hisilicon,mdio".
+- Inherits from MDIO bus node binding [2]
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	mdio {
+		compatible = "hisilicon,mdio";
+		reg = <0x28f1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			marvell,reg-init = <18 0x14 0 0x8001>;
+		};
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			marvell,reg-init = <18 0x14 0 0x8001>;
+		};
+	};
+
+	ppe: ppe@28c0000 {
+		compatible = "hisilicon,hip04-ppe", "syscon";
+		reg = <0x28c0000 0x10000>;
+	};
+
+	fe: ethernet@28b0000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x28b0000 0x10000>;
+		interrupts = <0 413 4>;
+		phy-mode = "mii";
+		port-handle = <&ppe 31 0 31>;
+	};
+
+	ge0: ethernet@2800000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x2800000 0x10000>;
+		interrupts = <0 402 4>;
+		phy-mode = "sgmii";
+		port-handle = <&ppe 0 1 0>;
+		phy-handle = <&phy0>;
+	};
+
+	ge8: ethernet@2880000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x2880000 0x10000>;
+		interrupts = <0 410 4>;
+		phy-mode = "sgmii";
+		port-handle = <&ppe 8 2 8>;
+		phy-handle = <&phy1>;
+	};
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
new file mode 100644
index 0000000000..cddf46bf6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt
@@ -0,0 +1,60 @@
+Hisilicon hix5hd2 gmac controller
+
+Required properties:
+- compatible: should contain one of the following SoC strings:
+	* "hisilicon,hix5hd2-gmac"
+	* "hisilicon,hi3798cv200-gmac"
+	* "hisilicon,hi3516a-gmac"
+	and one of the following version string:
+	* "hisilicon,hisi-gmac-v1"
+	* "hisilicon,hisi-gmac-v2"
+  The version v1 includes SoCs hix5hd2.
+  The version v2 includes SoCs hi3798cv200, hi3516a.
+- reg: specifies base physical address(s) and size of the device registers.
+  The first region is the MAC register base and size.
+  The second region is external interface control register.
+- interrupts: should contain the MAC interrupt.
+- #address-cells: must be <1>.
+- #size-cells: must be <0>.
+- phy-mode: see ethernet.txt [1].
+- phy-handle: see ethernet.txt [1].
+- clocks: clock phandle and specifier pair.
+- clock-names: contain the clock name "mac_core"(required) and "mac_ifc"(optional).
+- resets: should contain the phandle to the MAC core reset signal(optional),
+	the MAC interface reset signal(optional)
+	and the PHY reset signal(optional).
+- reset-names: contain the reset signal name "mac_core"(optional),
+	"mac_ifc"(optional) and "phy"(optional).
+- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
+	The 1st cell is reset pre-delay in micro seconds.
+	The 2nd cell is reset pulse in micro seconds.
+	The 3rd cell is reset post-delay in micro seconds.
+
+The MAC address will be determined using the properties defined in
+ethernet.txt[1].
+
+- PHY subnode: inherits from phy binding [2]
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	gmac0: ethernet@f9840000 {
+		compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+		reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
+		interrupts = <0 71 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy-mode = "rgmii";
+		phy-handle = <&phy2>;
+		mac-address = [00 00 00 00 00 00];
+		clocks = <&crg HISTB_ETH0_MAC_CLK>, <&crg HISTB_ETH0_MACIF_CLK>;
+		clock-names = "mac_core", "mac_ifc";
+		resets = <&crg 0xcc 8>, <&crg 0xcc 10>, <&crg 0xcc 12>;
+		reset-names = "mac_core", "mac_ifc", "phy";
+		hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
new file mode 100644
index 0000000000..8ee4b1ceda
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -0,0 +1,90 @@
+Hisilicon DSA Fabric device controller
+
+Required properties:
+- compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
+  "hisilicon,hns-dsaf-v1" is for hip05.
+  "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
+- mode: dsa fabric mode string. only support one of dsaf modes like these:
+		"2port-64vf",
+		"6port-16rss",
+		"6port-16vf",
+		"single-port".
+- interrupts: should contain the DSA Fabric and rcb interrupt.
+- reg: specifies base physical address(es) and size of the device registers.
+  The first region is external interface control register base and size(optional,
+  only used when subctrl-syscon does not exist). It is recommended using
+  subctrl-syscon rather than this address.
+  The second region is SerDes base register and size(optional, only used when
+  serdes-syscon in port node does not exist). It is recommended using
+  serdes-syscon rather than this address.
+  The third region is the PPE register base and size.
+  The fourth region is dsa fabric base register and size. It is not required for
+  single-port mode.
+- reg-names: may be ppe-base and(or) dsaf-base. It is used to find the
+  corresponding reg's index.
+
+- phy-handle: phy handle of physical port, 0 if not any phy device. It is optional
+  attribute. If port node exists, phy-handle in each port node will be used.
+  see ethernet.txt [1].
+- subctrl-syscon: is syscon handle for external interface control register.
+- reset-field-offset: is offset of reset field. Its value depends on the hardware
+  user manual.
+- buf-size: rx buffer size, should be 16-1024.
+- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096.
+
+- port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending
+  on mode of dsaf). Port node contain some attributes listed below:
+- reg: is physical port index in one dsaf.
+- phy-handle: phy handle of physical port. It is not required if there isn't
+  phy device. see ethernet.txt [1].
+- serdes-syscon: is syscon handle for SerDes register.
+- cpld-syscon: is syscon handle + register offset pair for cpld register. It is
+  not required if there isn't cpld device.
+- port-rst-offset: is offset of reset field for each port in dsaf. Its value
+  depends on the hardware user manual.
+- port-mode-offset: is offset of port mode field for each port in dsaf. Its
+  value depends on the hardware user manual.
+- mc-mac-mask: mask of multicast address, determines bit in multicast address
+  to set:
+  1 stands for this bit will be precisely matched, TCAM will check this bit of
+    MAC address.
+  0 stands for this bit will be fuzzy matched, TCAM won't care about this bit
+    of MAC address.
+
+[1] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+
+dsaf0: dsa@c7000000 {
+	compatible = "hisilicon,hns-dsaf-v1";
+	mode = "6port-16rss";
+	interrupt-parent = <&mbigen_dsa>;
+	reg = <0x0 0xc5000000 0x0 0x890000
+	       0x0 0xc7000000 0x0 0x60000>;
+	reg-names = "ppe-base", "dsaf-base";
+	subctrl-syscon = <&subctrl>;
+	reset-field-offset = 0;
+	interrupts = <131 4>,<132 4>, <133 4>,<134 4>,
+		     <135 4>,<136 4>, <137 4>,<138 4>,
+		     <139 4>,<140 4>, <141 4>,<142 4>,
+		     <143 4>,<144 4>, <145 4>,<146 4>,
+		     <147 4>,<148 4>, <384 1>,<385 1>,
+		     <386 1>,<387 1>, <388 1>,<389 1>,
+		     <390 1>,<391 1>,
+	buf-size = <4096>;
+	desc-num = <1024>;
+	dma-coherent;
+
+	port@0 {
+		reg = 0;
+		phy-handle = <&phy0>;
+		serdes-syscon = <&serdes>;
+		mc-mac-mask = [ff f0 00 00 00 00];
+	};
+
+	port@1 {
+                reg = 1;
+                serdes-syscon = <&serdes>;
+		mc-mac-mask = [ff f0 00 00 00 00];
+        };
+};
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt
new file mode 100644
index 0000000000..4a7ede9657
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt
@@ -0,0 +1,27 @@
+Hisilicon MDIO bus controller
+
+Properties:
+- compatible: can be one of:
+	"hisilicon,hns-mdio"
+	"hisilicon,mdio"
+  "hisilicon,hns-mdio" is recommended to be used for hip05 and later SOCs,
+  while "hisilicon,mdio" is optional for backwards compatibility only on
+  hip04 Soc.
+- reg: The base address of the MDIO bus controller register bank.
+- #address-cells: Must be <1>.
+- #size-cells: Must be <0>.  MDIO addresses have no size component.
+
+Typically an MDIO bus might have several children.
+
+Example:
+         mdio@803c0000 {
+                   #address-cells = <1>;
+                   #size-cells = <0>;
+                   compatible = "hisilicon,hns-mdio","hisilicon,mdio";
+                   reg = <0x0 0x803c0000 0x0 0x10000>;
+
+                   ethernet-phy@0 {
+                            ...
+                            reg = <0>;
+                   };
+         };
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
new file mode 100644
index 0000000000..f0421ee3c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@@ -0,0 +1,76 @@
+Hisilicon Network Subsystem NIC controller
+
+Required properties:
+- compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
+  "hisilicon,hns-nic-v1" is for hip05.
+  "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
+- ae-handle: accelerator engine handle for hns,
+  specifies a reference to the associating hardware driver node.
+  see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+- port-id: is the index of port provided by DSAF (the accelerator). DSAF can
+  connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They
+  are called debug ports.
+
+  The remaining 6 PHYs are taken according to the mode of DSAF.
+
+  In NIC mode of DSAF, all 6 PHYs are taken as ethernet ports to the CPU. The
+  port-id can be 2 to 7. Here is the diagram:
+            +-----+---------------+
+            |            CPU      |
+            +-+-+-+---+-+-+-+-+-+-+
+              | |     | | | | | |
+             debug       service
+             port         port
+             (0,1)       (2-7)
+
+  In Switch mode of DSAF, all 6 PHYs are taken as physical ports connect to a
+  LAN Switch while the CPU side assume itself have one single NIC connect to
+  this switch. In this case, the port-id will be 2 only.
+            +-----+---------------+
+            |            CPU      |
+            +-+-+-+---+-+-+-+-+-+-+
+              | |   service| port(2)
+             debug   +------------+
+             port    |   switch   |
+             (0,1)   +-+-+-+-+-+-++
+                       | | | | | |
+                      external port
+
+  This attribute is remained for compatible purpose. It is not recommended to
+  use it in new code.
+
+- port-idx-in-ae: is the index of port provided by AE.
+  In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports
+  to the CPU. The port-idx-in-ae can be 0 to 5. Here is the diagram:
+            +-----+---------------+
+            |            CPU      |
+            +-+-+-+---+-+-+-+-+-+-+
+              |    |   | | | | | |
+           debug debug   service
+           port  port     port
+           (0)   (0)     (0-5)
+
+  In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical
+  ports connected to a LAN Switch while the CPU side assume itself have one
+  single NIC connected to this switch. In this case, the port-idx-in-ae
+  will be 0 only.
+            +-----+-----+------+------+
+            |                CPU      |
+            +-+-+-+-+-+-+-+-+-+-+-+-+-+
+              |    |     service| port(0)
+            debug debug  +------------+
+            port  port   |   switch   |
+            (0)   (0)    +-+-+-+-+-+-++
+                          | | | | | |
+                         external port
+
+- local-mac-address: mac addr of the ethernet interface
+
+Example:
+
+	ethernet@0{
+		compatible = "hisilicon,hns-nic-v1";
+		ae-handle = <&dsaf0>;
+		port-idx-in-ae = <0>;
+		local-mac-address = [a2 14 e4 4b 56 76];
+	};
diff --git a/Documentation/devicetree/bindings/net/ibm,emac.txt b/Documentation/devicetree/bindings/net/ibm,emac.txt
new file mode 100644
index 0000000000..c0c14aa3f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ibm,emac.txt
@@ -0,0 +1,205 @@
+    4xx/Axon EMAC ethernet nodes
+
+    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+    the Axon bridge.  To operate this needs to interact with a this
+    special McMAL DMA controller, and sometimes an RGMII or ZMII
+    interface.  In addition to the nodes and properties described
+    below, the node for the OPB bus on which the EMAC sits must have a
+    correct clock-frequency property.
+
+      i) The EMAC node itself
+
+    Required properties:
+    - device_type       : "network"
+
+    - compatible        : compatible list, contains 2 entries, first is
+			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+			  405gp, Axon) and second is either "ibm,emac" or
+			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
+			  "ibm,emac4"
+    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
+    - reg               : <registers mapping>
+    - local-mac-address : 6 bytes, MAC address
+    - mal-device        : phandle of the associated McMAL node
+    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
+			  with this EMAC
+    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
+			  with this EMAC
+    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
+			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+			  each Axon chip)
+    - max-frame-size    : 1 cell, maximum frame size supported in bytes
+    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048
+    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048.
+    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
+			  thresholds).
+			  For Axon, 0x00000010
+    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
+			  in bytes.
+			  For Axon, 0x00000100 (I think ...)
+    - phy-mode          : string, mode of operations of the PHY interface.
+			  Supported values are: "mii", "rmii", "smii", "rgmii",
+			  "tbi", "gmii", rtbi", "sgmii".
+			  For Axon on CAB, it is "rgmii"
+    - mdio-device       : 1 cell, required iff using shared MDIO registers
+			  (440EP).  phandle of the EMAC to use to drive the
+			  MDIO lines for the PHY used by this EMAC.
+    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
+			  the ZMII device node
+    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
+			  channel or 0xffffffff if ZMII is only used for MDIO.
+    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
+			  of the RGMII device node.
+			  For Axon: phandle of plb5/plb4/opb/rgmii
+    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
+			  RGMII channel is used by this EMAC.
+			  Fox Axon: present, whatever value is appropriate for each
+			  EMAC, that is the content of the current (bogus) "phy-port"
+			  property.
+
+    Optional properties:
+    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+			  a search is performed.
+    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
+			  for, used if phy-address is absent. bit 0x00000001 is
+			  MDIO address 0.
+			  For Axon it can be absent, though my current driver
+			  doesn't handle phy-address yet so for now, keep
+			  0x00ffffff in it.
+    - phy-handle	: Used to describe configurations where a external PHY
+			  is used. Please refer to:
+			  Documentation/devicetree/bindings/net/ethernet.txt
+    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  rx-fifo-size).  For Axon, either absent or 2048.
+    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  tx-fifo-size). For Axon, either absent or 2048.
+    - tah-device        : 1 cell, optional. If connected to a TAH engine for
+			  offload, phandle of the TAH device node.
+    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
+			  TAH engine.
+    - fixed-link	: Fixed-link subnode describing a link to a non-MDIO
+			  managed entity. See
+			  Documentation/devicetree/bindings/net/fixed-link.txt
+			  for details.
+    - mdio subnode	: When the EMAC has a phy connected to its local
+			  mdio, which us supported by the kernel's network
+			  PHY library in drivers/net/phy, there must be device
+			  tree subnode with the following required properties:
+				- #address-cells: Must be <1>.
+				- #size-cells: Must be <0>.
+
+			  For PHY definitions: Please refer to
+			  Documentation/devicetree/bindings/net/phy.txt and
+			  Documentation/devicetree/bindings/net/ethernet.txt
+
+    Examples:
+
+	EMAC0: ethernet@40000800 {
+		device_type = "network";
+		compatible = "ibm,emac-440gp", "ibm,emac";
+		interrupt-parent = <&UIC1>;
+		interrupts = <1c 4 1d 4>;
+		reg = <40000800 70>;
+		local-mac-address = [00 04 AC E3 1B 1E];
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0 1>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <5dc>;
+		rx-fifo-size = <1000>;
+		tx-fifo-size = <800>;
+		phy-mode = "rmii";
+		phy-map = <00000001>;
+		zmii-device = <&ZMII0>;
+		zmii-channel = <0>;
+	};
+
+	EMAC1: ethernet@ef600c00 {
+		device_type = "network";
+		compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
+		interrupt-parent = <&EMAC1>;
+		interrupts = <0 1>;
+		#interrupt-cells = <1>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH /* Status */
+				 1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH /* Wake */>;
+		reg = <0xef600c00 0x000000c4>;
+		local-mac-address = [000000000000]; /* Filled in by U-Boot */
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <9000>;
+		rx-fifo-size = <16384>;
+		tx-fifo-size = <2048>;
+		fifo-entry-size = <10>;
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+		phy-map = <0x00000000>;
+		rgmii-device = <&RGMII0>;
+		rgmii-channel = <0>;
+		tah-device = <&TAH0>;
+		tah-channel = <0>;
+		has-inverted-stacr-oc;
+		has-new-stacr-staopc;
+
+	        mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+		};
+	};
+
+
+      ii) McMAL node
+
+    Required properties:
+    - device_type        : "dma-controller"
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+			   emac) and the second is either "ibm,mcmal" or
+			   "ibm,mcmal2".
+			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+    - interrupts         : <interrupt mapping for the MAL interrupts sources:
+                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+                           For Axon: This is _different_ from the current
+			   firmware.  We use the "delayed" interrupts for txeob
+			   and rxeob. Thus we end up with mapping those 5 MPIC
+			   interrupts, all level positive sensitive: 10, 11, 32,
+			   33, 34 (in decimal)
+    - dcr-reg            : < DCR registers range >
+    - dcr-parent         : if needed for dcr-reg
+    - num-tx-chans       : 1 cell, number of Tx channels
+    - num-rx-chans       : 1 cell, number of Rx channels
+
+      iii) ZMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,zmii".
+			   For Axon, there is no ZMII node.
+    - reg                : <registers mapping>
+
+      iv) RGMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,rgmii".
+                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
+    - reg                : <registers mapping>
+    - revision           : as provided by the RGMII new version register if
+			   available.
+			   For Axon: 0x0000012a
diff --git a/Documentation/devicetree/bindings/net/icplus-ip101ag.txt b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt
new file mode 100644
index 0000000000..a784592bbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/icplus-ip101ag.txt
@@ -0,0 +1,19 @@
+IC Plus Corp. IP101A / IP101G Ethernet PHYs
+
+There are different models of the IP101G Ethernet PHY:
+- IP101GR (32-pin QFN package)
+- IP101G (die only, no package)
+- IP101GA (48-pin LQFP package)
+
+There are different models of the IP101A Ethernet PHY (which is the
+predecessor of the IP101G):
+- IP101A (48-pin LQFP package)
+- IP101AH (48-pin LQFP package)
+
+Optional properties for the IP101GR (32-pin QFN package):
+
+- icplus,select-rx-error:
+  pin 21 ("RXER/INTR_32") will output the receive error status.
+  interrupts are not routed outside the PHY in this mode.
+- icplus,select-interrupt:
+  pin 21 ("RXER/INTR_32") will output the interrupt signal.
diff --git a/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml
new file mode 100644
index 0000000000..11ffc306dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/idt,3243x-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 79rc3243x Ethernet controller
+
+description: Ethernet controller integrated into IDT 79RC3243x family SoCs
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: idt,3243x-emac
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: emac
+      - const: dma_rx
+      - const: dma_tx
+
+  interrupts:
+    items:
+      - description: RX interrupt
+      - description: TX interrupt
+
+  interrupt-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mdioclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+
+    ethernet@60000 {
+        compatible = "idt,3243x-emac";
+
+        reg = <0x60000 0x10000>,
+              <0x40000 0x14>,
+              <0x40014 0x14>;
+        reg-names = "emac", "dma_rx", "dma_tx";
+
+        interrupt-parent = <&rcpic3>;
+        interrupts = <0>, <1>;
+        interrupt-names = "rx", "tx";
+
+        clocks = <&iclk>;
+        clock-names = "mdioclk";
+    };
diff --git a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
new file mode 100644
index 0000000000..d24172cc6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
@@ -0,0 +1,18 @@
+* ADF7242 IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "adi,adf7242", "adi,adf7241"
+  - spi-max-frequency:	maximal bus speed (12.5 MHz)
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device via pin IRQ1.
+			IRQ_TYPE_LEVEL_HIGH (4) or IRQ_TYPE_EDGE_FALLING (1)
+
+Example:
+
+	adf7242@0 {
+		compatible = "adi,adf7242";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio3>;
+	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
new file mode 100644
index 0000000000..168f1be509
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt
@@ -0,0 +1,27 @@
+* AT86RF230 IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "atmel,at86rf230", "atmel,at86rf231",
+			"atmel,at86rf233" or "atmel,at86rf212"
+  - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
+			sync or async operation mode
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device. Non high-level
+			can occur deadlocks while handling isr.
+
+Optional properties:
+  - reset-gpio:		GPIO spec for the rstn pin
+  - sleep-gpio:		GPIO spec for the slp_tr pin
+  - xtal-trim:		u8 value for fine tuning the internal capacitance
+			arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF
+
+Example:
+
+	at86rf231@0 {
+		compatible = "atmel,at86rf231";
+		spi-max-frequency = <7500000>;
+		reg = <0>;
+		interrupts = <19 4>;
+		interrupt-parent = <&gpio3>;
+		xtal-trim = /bits/ 8 <0x06>;
+	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
new file mode 100644
index 0000000000..a1046e636f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
@@ -0,0 +1,28 @@
+* CA8210 IEEE 802.15.4 *
+
+Required properties:
+	- compatible:           Should be "cascoda,ca8210"
+	- reg:                  Controlling chip select
+	- spi-max-frequency:    Maximum clock speed, should be *less than*
+	                        4000000
+	- spi-cpol:             Requires inverted clock polarity
+	- reset-gpio:           GPIO attached to reset
+	- irq-gpio:             GPIO attached to IRQ
+Optional properties:
+	- extclock-enable:      Include for the ca8210 to route its 16MHz clock
+	                        to an output
+	- extclock-freq:        Frequency in Hz of the external clock
+	- extclock-gpio:        GPIO of the ca8210 to output the clock on
+
+Example:
+	ca8210@0 {
+		compatible = "cascoda,ca8210";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+		spi-cpol;
+		reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		extclock-enable;
+		extclock-freq = 16000000;
+		extclock-gpio = 2;
+	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
new file mode 100644
index 0000000000..fb6d49f184
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
@@ -0,0 +1,33 @@
+*CC2520 IEEE 802.15.4 Compatible Radio*
+
+Required properties:
+	- compatible: 		should be "ti,cc2520"
+	- spi-max-frequency:	maximal bus speed (8000000), should be set to 4000000 depends
+				sync or async operation mode
+	- reg:			the chipselect index
+	- pinctrl-0: 		pin control group to be used for this controller.
+	- pinctrl-names: 	must contain a "default" entry.
+	- fifo-gpio:		GPIO spec for the FIFO pin
+	- fifop-gpio:		GPIO spec for the FIFOP pin
+	- sfd-gpio:		GPIO spec for the SFD pin
+	- cca-gpio:		GPIO spec for the CCA pin
+	- vreg-gpio:		GPIO spec for the VREG pin
+	- reset-gpio:		GPIO spec for the RESET pin
+Optional properties:
+	- amplified:		include if the CC2520 is connected to a CC2591 amplifier
+
+Example:
+	cc2520@0 {
+		compatible = "ti,cc2520";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		amplified;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc2520_cape_pins>;
+		fifo-gpio = <&gpio1 18 0>;
+		fifop-gpio = <&gpio1 19 0>;
+		sfd-gpio = <&gpio1 13 0>;
+		cca-gpio = <&gpio1 16 0>;
+		vreg-gpio = <&gpio0 31 0>;
+		reset-gpio = <&gpio1 12 0>;
+	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt b/Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
new file mode 100644
index 0000000000..2aaef567c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/mcr20a.txt
@@ -0,0 +1,23 @@
+* MCR20A IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "nxp,mcr20a"
+  - spi-max-frequency:	maximal bus speed, should be set to a frequency
+			lower than 9000000 depends sync or async operation mode
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device. Non high-level
+			can occur deadlocks while handling isr.
+
+Optional properties:
+  - rst_b-gpio:		GPIO spec for the RST_B pin
+
+Example:
+
+	mcr20a@0 {
+		compatible = "nxp,mcr20a";
+		spi-max-frequency = <9000000>;
+		reg = <0>;
+		interrupts = <17 2>;
+		interrupt-parent = <&gpio>;
+		rst_b-gpio = <&gpio 27 1>
+	};
diff --git a/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt b/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
new file mode 100644
index 0000000000..a4ed2efb5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
@@ -0,0 +1,20 @@
+* MRF24J40 IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "microchip,mrf24j40", "microchip,mrf24j40ma",
+			or "microchip,mrf24j40mc" depends on your transceiver
+			board
+  - spi-max-frequency:	maximal bus speed, should be set something under or equal
+			10000000
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device.
+
+Example:
+
+	mrf24j40ma@0 {
+		compatible = "microchip,mrf24j40ma";
+		spi-max-frequency = <8500000>;
+		reg = <0>;
+		interrupts = <19 8>;
+		interrupt-parent = <&gpio3>;
+	};
diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
new file mode 100644
index 0000000000..bdea101c2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ingenic,mac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAC in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The Ethernet Media Access Controller in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4775-mac
+      - ingenic,x1000-mac
+      - ingenic,x1600-mac
+      - ingenic,x1830-mac
+      - ingenic,x2000-mac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: stmmaceth
+
+  mode-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: An extra syscon register that control ethernet interface and timing delay
+
+  rx-clk-delay-ps:
+    description: RGMII receive clock delay defined in pico seconds
+
+  tx-clk-delay-ps:
+    description: RGMII transmit clock delay defined in pico seconds
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - mode-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
+
+    mac: ethernet@134b0000 {
+        compatible = "ingenic,x1000-mac";
+        reg = <0x134b0000 0x2000>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <55>;
+        interrupt-names = "macirq";
+
+        clocks = <&cgu X1000_CLK_MAC>;
+        clock-names = "stmmaceth";
+
+        mode-reg = <&mac_phy_ctrl>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
new file mode 100644
index 0000000000..42a0bc9431
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel DWMAC glue layer
+
+maintainers:
+  - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - intel,keembay-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - intel,keembay-dwmac
+          - const: snps,dwmac-4.10a
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: PTP reference clock
+      - description: Tx clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: ptp_ref
+      - const: tx_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+# FIXME: Remove defines and include the correct header file
+# once it is available in mainline.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define MOVISOC_KMB_PSS_GBE
+    #define MOVISOC_KMB_PSS_AUX_GBE_PTP
+    #define MOVISOC_KMB_PSS_AUX_GBE_TX
+
+    stmmac_axi_setup: stmmac-axi-config {
+        snps,lpi_en;
+        snps,wr_osr_lmt = <0x0>;
+        snps,rd_osr_lmt = <0x2>;
+        snps,blen = <0 0 0 0 16 8 4>;
+    };
+
+    mtl_rx_setup: rx-queues-config {
+        snps,rx-queues-to-use = <2>;
+        snps,rx-sched-sp;
+        queue0 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x0>;
+            snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,dcb-algorithm;
+            snps,map-to-dma-channel = <0x1>;
+            snps,priority = <0x1>;
+        };
+    };
+
+    mtl_tx_setup: tx-queues-config {
+        snps,tx-queues-to-use = <2>;
+        snps,tx-sched-wrr;
+        queue0 {
+           snps,weight = <0x10>;
+           snps,dcb-algorithm;
+           snps,priority = <0x0>;
+        };
+
+        queue1 {
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x1>;
+        };
+    };
+
+    gmac0: ethernet@3a000000 {
+        compatible = "intel,keembay-dwmac", "snps,dwmac-4.10a";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        reg = <0x3a000000 0x8000>;
+        snps,perfect-filter-entries = <128>;
+        phy-handle = <&eth_phy0>;
+        phy-mode = "rgmii";
+        rx-fifo-depth = <4096>;
+        tx-fifo-depth = <4096>;
+        clock-names = "stmmaceth", "ptp_ref", "tx_clk";
+        clocks = <&scmi_clk MOVISOC_KMB_PSS_GBE>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_PTP>,
+                 <&scmi_clk MOVISOC_KMB_PSS_AUX_GBE_TX>;
+        snps,pbl = <0x4>;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,mtl-rx-config = <&mtl_rx_setup>;
+        snps,mtl-tx-config = <&mtl_tx_setup>;
+        snps,tso;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
new file mode 100644
index 0000000000..f92730b1d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP46x PTP Timer (TSYNC)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP46x PTP timer is known in the manual as IEEE1588 Hardware
+  Assist and Time Synchronization Hardware Assist TSYNC provides a PTP
+  timer. It exists in the Intel IXP45x and IXP46x XScale SoCs.
+
+properties:
+  compatible:
+    const: intel,ixp46x-ptp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt to trigger master mode snapshot from the
+          PRP timer, usually a GPIO interrupt.
+      - description: Interrupt to trigger slave mode snapshot from the
+          PRP timer, usually a GPIO interrupt.
+
+  interrupt-names:
+    items:
+      - const: master
+      - const: slave
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ptp-timer@c8010000 {
+        compatible = "intel,ixp46x-ptp-timer";
+        reg = <0xc8010000 0x1000>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "master", "slave";
+    };
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
new file mode 100644
index 0000000000..4fdc532882
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx ethernet
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Manager to process
+  the ethernet frames. It can optionally contain an MDIO bus to
+  talk to PHYs.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-ethernet
+
+  reg:
+    maxItems: 1
+    description: Ethernet MMIO address range
+
+  queue-rx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX queue node
+          - description: RX queue instance to use
+    description: phandle to the RX queue on the NPE
+
+  queue-txready:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TX READY queue node
+          - description: TX READY queue instance to use
+    description: phandle to the TX READY queue on the NPE
+
+  phy-mode: true
+
+  phy-handle: true
+
+  intel,npe-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the NPE this ethernet instance is using
+          - description: the NPE instance to use
+    description: phandle to the NPE this ethernet instance is using
+      and the instance to use in the second cell
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - queue-rx
+  - queue-txready
+  - intel,npe-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    npe: npe@c8006000 {
+      compatible = "intel,ixp4xx-network-processing-engine";
+      reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+    };
+
+    ethernet@c8009000 {
+      compatible = "intel,ixp4xx-ethernet";
+      reg = <0xc8009000 0x1000>;
+      queue-rx = <&qmgr 4>;
+      queue-txready = <&qmgr 21>;
+      intel,npe-handle = <&npe 1>;
+      phy-mode = "rgmii";
+      phy-handle = <&phy1>;
+    };
+
+    ethernet@c800c000 {
+      compatible = "intel,ixp4xx-ethernet";
+      reg = <0xc800c000 0x1000>;
+      queue-rx = <&qmgr 3>;
+      queue-txready = <&qmgr 20>;
+      intel,npe-handle = <&npe 2>;
+      phy-mode = "rgmii";
+      phy-handle = <&phy2>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy1: ethernet-phy@1 {
+          reg = <1>;
+        };
+        phy2: ethernet-phy@2 {
+          reg = <2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
new file mode 100644
index 0000000000..7a405e9b37
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx HSS makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Manager to process
+  V.35 Wideband Modem (WAN) links.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-hss
+
+  reg:
+    maxItems: 1
+    description: The HSS instance
+
+  intel,npe-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to the NPE this HSS instance is using
+        - description: the NPE instance number
+    description: phandle to the NPE this HSS instance is using
+      and the instance to use in the second cell
+
+  intel,queue-chl-rxtrig:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX trigger queue on the NPE
+          - description: the queue instance number
+    description: phandle to the RX trigger queue on the NPE
+
+  intel,queue-chl-txready:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TX ready queue on the NPE
+          - description: the queue instance number
+    description: phandle to the TX ready queue on the NPE
+
+  intel,queue-pkt-rx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
+    description: phandle to the packet RX queue on the NPE
+
+  intel,queue-pkt-tx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to the TX queue on the NPE
+        - description: the queue instance number
+    description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
+
+  intel,queue-pkt-rxfree:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to the RXFREE queue on the NPE
+        - description: the queue instance number
+    description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and
+      RXFREE3 queues on the NPE
+
+  intel,queue-pkt-txdone:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TXDONE queue on the NPE
+          - description: the queue instance number
+    description: phandle to the packet TXDONE queue on the NPE
+
+  cts-gpios:
+    maxItems: 1
+    description: Clear To Send (CTS) GPIO line
+
+  rts-gpios:
+    maxItems: 1
+    description: Ready To Send (RTS) GPIO line
+
+  dcd-gpios:
+    maxItems: 1
+    description: Data Carrier Detect (DCD) GPIO line
+
+  dtr-gpios:
+    maxItems: 1
+    description: Data Terminal Ready (DTR) GPIO line
+
+  clk-internal-gpios:
+    maxItems: 1
+    description: Clock internal GPIO line, driving this high will make the HSS
+      use internal clocking as opposed to external clocking
+
+required:
+  - compatible
+  - reg
+  - intel,npe-handle
+  - intel,queue-chl-rxtrig
+  - intel,queue-chl-txready
+  - intel,queue-pkt-rx
+  - intel,queue-pkt-tx
+  - intel,queue-pkt-rxfree
+  - intel,queue-pkt-txdone
+  - cts-gpios
+  - rts-gpios
+  - dcd-gpios
+  - dtr-gpios
+  - clk-internal-gpios
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt b/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
new file mode 100644
index 0000000000..6d7ab4e524
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
@@ -0,0 +1,35 @@
+* IPQ806x DWMAC Ethernet controller
+
+The device inherits all the properties of the dwmac/stmmac devices
+described in the file net/stmmac.txt with the following changes.
+
+Required properties:
+
+- compatible: should be "qcom,ipq806x-gmac" along with "snps,dwmac"
+	      and any applicable more detailed version number
+	      described in net/stmmac.txt
+
+- qcom,nss-common: should contain a phandle to a syscon device mapping the
+		   nss-common registers.
+
+- qcom,qsgmii-csr: should contain a phandle to a syscon device mapping the
+		   qsgmii-csr registers.
+
+Example:
+
+	gmac: ethernet@37000000 {
+		device_type = "network";
+		compatible = "qcom,ipq806x-gmac";
+		reg = <0x37000000 0x200000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+
+		qcom,nss-common = <&nss_common>;
+		qcom,qsgmii-csr = <&qsgmii_csr>;
+
+		clocks = <&gcc GMAC_CORE1_CLK>;
+		clock-names = "stmmaceth";
+
+		resets = <&gcc GMAC_CORE1_RESET>;
+		reset-names = "stmmaceth";
+	};
diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
new file mode 100644
index 0000000000..24f11e042f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
@@ -0,0 +1,265 @@
+This document describes the device tree bindings associated with the
+keystone network coprocessor(NetCP) driver support.
+
+The network coprocessor (NetCP) is a hardware accelerator that processes
+Ethernet packets. NetCP has a gigabit Ethernet (GbE) subsystem with a ethernet
+switch sub-module to send and receive packets. NetCP also includes a packet
+accelerator (PA) module to perform packet classification operations such as
+header matching, and packet modification operations such as checksum
+generation. NetCP can also optionally include a Security Accelerator (SA)
+capable of performing IPSec operations on ingress/egress packets.
+
+Keystone II SoC's also have a 10 Gigabit Ethernet Subsystem (XGbE) which
+includes a 3-port Ethernet switch sub-module capable of 10Gb/s and 1Gb/s rates
+per Ethernet port.
+
+Keystone NetCP driver has a plug-in module architecture where each of the NetCP
+sub-modules exist as a loadable kernel module which plug in to the netcp core.
+These sub-modules are represented as "netcp-devices" in the dts bindings. It is
+mandatory to have the ethernet switch sub-module for the ethernet interface to
+be operational. Any other sub-module like the PA is optional.
+
+NetCP Ethernet SubSystem Layout:
+
+-----------------------------
+  NetCP subsystem(10G or 1G)
+-----------------------------
+	|
+	|-> NetCP Devices ->	|
+	|			|-> GBE/XGBE Switch
+	|			|
+	|			|-> Packet Accelerator
+	|			|
+	|			|-> Security Accelerator
+	|
+	|
+	|
+	|-> NetCP Interfaces ->	|
+				|-> Ethernet Port 0
+				|
+				|-> Ethernet Port 1
+				|
+				|-> Ethernet Port 2
+				|
+				|-> Ethernet Port 3
+
+
+NetCP subsystem properties:
+Required properties:
+- compatible:	Should be "ti,netcp-1.0"
+- clocks:	phandle to the reference clocks for the subsystem.
+- dma-id:	Navigator packet dma instance id.
+- ranges:	address range of NetCP (includes, Ethernet SS, PA and SA)
+
+Optional properties:
+- reg:		register location and the size for the following register
+		regions in the specified order.
+		- Efuse MAC address register
+- dma-coherent:	Present if dma operations are coherent
+- big-endian:	Keystone devices can be operated in a mode where the DSP is in
+		the big endian mode. In such cases enable this option. This
+		option should also be enabled if the ARM is operated in
+		big endian mode with the DSP in little endian.
+
+NetCP device properties: Device specification for NetCP sub-modules.
+1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications.
+Required properties:
+- label:	Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb.
+- compatible:	Must be one of below:-
+		"ti,netcp-gbe" for 1GbE on NetCP 1.4
+		"ti,netcp-gbe-5" for 1GbE N NetCP 1.5 (N=5)
+		"ti,netcp-gbe-9" for 1GbE N NetCP 1.5 (N=9)
+		"ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2)
+		"ti,netcp-xgbe" for 10 GbE
+
+- reg:		register location and the size for the following register
+		regions in the specified order.
+		- switch subsystem registers
+		- sgmii port3/4 module registers (only for NetCP 1.4)
+		- switch module registers
+		- serdes registers (only for 10G)
+
+		NetCP 1.4 ethss, here is the order
+			index #0 - switch subsystem registers
+			index #1 - sgmii port3/4 module registers
+			index #2 - switch module registers
+
+		NetCP 1.5 ethss 9 port, 5 port and 2 port
+			index #0 - switch subsystem registers
+			index #1 - switch module registers
+			index #2 - serdes registers
+
+- tx-channel:	the navigator packet dma channel name for tx.
+- tx-queue:	the navigator queue number associated with the tx dma channel.
+- interfaces:	specification for each of the switch port to be registered as a
+		network interface in the stack.
+-- slave-port:	Switch port number, 0 based numbering.
+-- link-interface:	type of link interface, supported options are
+			- mac<->mac auto negotiate mode: 0
+			- mac<->phy mode: 1
+			- mac<->mac forced mode: 2
+			- mac<->fiber mode: 3
+			- mac<->phy mode with no mdio: 4
+			- 10Gb mac<->phy mode : 10
+			- 10Gb mac<->mac forced mode : 11
+----phy-handle:	phandle to PHY device
+
+- cpts:		sub-node time synchronization (CPTS) submodule configuration
+-- clocks:	CPTS reference clock. Should point on cpts-refclk-mux clock.
+-- clock-names: should be "cpts"
+-- cpts-refclk-mux: multiplexer clock definition sub-node for CPTS reference (RFTCLK) clock
+--- #clock-cells: should be 0
+--- clocks:	list of CPTS reference (RFTCLK) clock's parents as defined in Data manual
+--- ti,mux-tbl: array of multiplexer indexes as defined in Data manual
+--- assigned-clocks: should point on cpts-refclk-mux clock
+--- assigned-clock-parents: should point on required RFTCLK clock parent to be selected
+-- cpts_clock_mult: (optional) Numerator to convert input clock ticks
+		into nanoseconds
+-- cpts_clock_shift: (optional) Denominator to convert input clock ticks into
+		nanoseconds.
+		Mult and shift will be calculated basing on CPTS
+		rftclk frequency if both cpts_clock_shift and
+		cpts_clock_mult properties are not provided.
+
+Optional properties:
+- enable-ale:	NetCP driver keeps the address learning feature in the ethernet
+		switch module disabled. This attribute is to enable the address
+		learning.
+- secondary-slave-ports:	specification for each of the switch port not be
+				registered as a network interface. NetCP driver
+				will only initialize these ports and attach PHY
+				driver to them if needed.
+
+NetCP interface properties: Interface specification for NetCP sub-modules.
+Required properties:
+- rx-channel:	the navigator packet dma channel name for rx.
+- rx-queue:	the navigator queue number associated with rx dma channel.
+- rx-pool:	specifies the number of descriptors to be used & the region-id
+		for creating the rx descriptor pool.
+- tx-pool:	specifies the number of descriptors to be used & the region-id
+		for creating the tx descriptor pool.
+- rx-queue-depth:	number of descriptors in each of the free descriptor
+			queue (FDQ) for the pktdma Rx flow. There can be at
+			present a maximum of 4 queues per Rx flow.
+- rx-buffer-size:	the buffer size for each of the Rx flow FDQ.
+- tx-completion-queue:	the navigator queue number where the descriptors are
+			recycled after Tx DMA completion.
+
+Optional properties:
+- efuse-mac:	If this is 1, then the MAC address for the interface is
+		obtained from the device efuse mac address register.
+		If this is 2, the two DWORDs occupied by the MAC address
+		are swapped.  The netcp driver will swap the two DWORDs
+		back to the proper order when this property is set to 2
+		when it obtains the mac address from efuse.
+- "netcp-device label":	phandle to the device specification for each of NetCP
+			sub-module attached to this interface.
+
+The MAC address will be determined using the optional properties defined in
+ethernet.txt and only if efuse-mac is set to 0. If all of the optional MAC
+address properties are not present, then the driver will use a random MAC
+address.
+
+Example binding:
+
+netcp: netcp@2000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges  = <0 0x2000000 0xfffff>;
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+	/* big-endian; */
+	dma-id = <0>;
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@90000 {
+			label = "netcp-gbe";
+			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+			/* enable-ale; */
+			tx-queue = <648>;
+			tx-channel = <8>;
+
+			cpts {
+				clocks = <&cpts_refclk_mux>;
+				clock-names = "cpts";
+
+				cpts_refclk_mux: cpts-refclk-mux {
+					#clock-cells = <0>;
+					clocks = <&chipclk12>, <&chipclk13>,
+						 <&timi0>, <&timi1>,
+						 <&tsipclka>, <&tsrefclk>,
+						 <&tsipclkb>;
+					ti,mux-tbl = <0x0>, <0x1>, <0x2>,
+						<0x3>, <0x4>, <0x8>, <0xC>;
+					assigned-clocks = <&cpts_refclk_mux>;
+					assigned-clock-parents = <&chipclk12>;
+				};
+			};
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <4>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <4>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = <22>;
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8704>;
+			tx-completion-queue = <8706>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = <23>;
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8705>;
+			tx-completion-queue = <8707>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 6f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
+
+CPTS board configuration - select external CPTS RFTCLK:
+
+&tsrefclk{
+	clock-frequency = <500000000>;
+};
+
+&cpts_refclk_mux {
+	assigned-clock-parents = <&tsrefclk>;
+};
diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
new file mode 100644
index 0000000000..3ce9f9a16b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway ETOP Ethernet driver
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  $nodename:
+    pattern: "^ethernet@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,etop-xway
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  lantiq,tx-burst-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      TX programmable burst length.
+    enum: [2, 4, 8]
+
+  lantiq,rx-burst-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RX programmable burst length.
+    enum: [2, 4, 8]
+
+  phy-mode: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - lantiq,tx-burst-length
+  - lantiq,rx-burst-length
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@e180000 {
+        compatible = "lantiq,etop-xway";
+        reg = <0xe180000 0x40000>;
+        interrupt-parent = <&icu0>;
+        interrupts = <73>, <78>;
+        interrupt-names = "tx", "rx";
+        lantiq,tx-burst-length = <8>;
+        lantiq,rx-burst-length = <8>;
+        phy-mode = "rmii";
+    };
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
new file mode 100644
index 0000000000..5bc1a21ca5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,xrx200-net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq xRX200 GSWIP PMAC Ethernet driver
+
+maintainers:
+  - Hauke Mehrtens <hauke@hauke-m.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,xrx200-net
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@e10b308 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "lantiq,xrx200-net";
+        reg = <0xe10b308 0xcf8>;
+        interrupt-parent = <&icu0>;
+        interrupts = <73>, <72>;
+        interrupt-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
new file mode 100644
index 0000000000..ebf4e360f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/litex,liteeth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteETH ethernet device
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+description: |
+  LiteETH is a small footprint and configurable Ethernet core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/liteeth/.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,liteeth
+
+  reg:
+    items:
+      - description: MAC registers
+      - description: MDIO registers
+      - description: Packet buffer
+
+  reg-names:
+    items:
+      - const: mac
+      - const: mdio
+      - const: buffer
+
+  interrupts:
+    maxItems: 1
+
+  litex,rx-slots:
+    description: Number of slots in the receive buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,tx-slots:
+    description: Number of slots in the transmit buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,slot-size:
+    description: Size in bytes of a slot in the tx/rx buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x800
+    default: 0x800
+
+  mac-address: true
+  local-mac-address: true
+  phy-handle: true
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mac: ethernet@8020000 {
+        compatible = "litex,liteeth";
+        reg = <0x8021000 0x100>,
+              <0x8020800 0x100>,
+              <0x8030000 0x2000>;
+        reg-names = "mac", "mdio", "buffer";
+        litex,rx-slots = <2>;
+        litex,tx-slots = <2>;
+        litex,slot-size = <0x800>;
+        interrupts = <0x11 0x1>;
+        phy-handle = <&eth_phy>;
+
+        mdio {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          eth_phy: ethernet-phy@0 {
+            reg = <0>;
+          };
+        };
+    };
+...
+
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt
new file mode 100644
index 0000000000..cfe0e5991d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lpc-eth.txt
@@ -0,0 +1,28 @@
+* NXP LPC32xx SoC Ethernet Controller
+
+Required properties:
+- compatible: Should be "nxp,lpc-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain ethernet controller interrupt
+
+Optional properties:
+- phy-mode: See ethernet.txt file in the same directory. If the property is
+  absent, "rmii" is assumed.
+- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+
+Optional subnodes:
+- mdio : specifies the mdio bus, used as a container for phy nodes according to
+  phy.txt in the same directory
+
+
+Example:
+
+	mac: ethernet@31060000 {
+		compatible = "nxp,lpc-eth";
+		reg = <0x31060000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <29 0>;
+
+		phy-mode = "rmii";
+		use-iram;
+	};
diff --git a/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml b/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml
new file mode 100644
index 0000000000..8a14c919e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,dfx-server.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Prestera DFX server
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: marvell,dfx-server
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: marvell,dfx-server
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+# The DFX server may expose clocks described as subnodes
+additionalProperties:
+  type: object
+
+examples:
+  - |
+
+    #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+    bus@0 {
+        reg = <0 0>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        dfx-bus@ac000000 {
+            compatible = "marvell,dfx-server", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+            reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
new file mode 100644
index 0000000000..3a33251680
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,mvusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell USB to MDIO Controller
+
+maintainers:
+  - Tobias Waldekranz <tobias@waldekranz.com>
+
+description: |+
+  This controller is mounted on development boards for Marvell's Link Street
+  family of Ethernet switches. It allows you to configure the switch's registers
+  using the standard MDIO interface.
+
+  Since the device is connected over USB, there is no strict requirement of
+  having a device tree representation of the device. But in order to use it with
+  the mv88e6xxx driver, you need a device tree node in which to place the switch
+  definition.
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: usb1286,1fa4
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* USB host controller */
+    usb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mdio@1 {
+                    compatible = "usb1286,1fa4";
+                    reg = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    switch@0 {
+                            compatible = "marvell,mv88e6190";
+                            reg = <0x0>;
+
+                            ports {
+                                    /* Port definitions */
+                            };
+
+                            mdio {
+                                    /* PHY definitions */
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
new file mode 100644
index 0000000000..e35da8b01d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MDIO Ethernet Controller interface
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |
+  The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0,
+  Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that
+  provides an interface with the MDIO bus. Additionally, Armada 7k and Armada
+  8k has a second unit which provides an interface with the xMDIO bus. This
+  driver handles these interfaces.
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-mdio
+      - marvell,xmdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: mdio.yaml#
+
+  - if:
+      required:
+        - interrupts
+
+    then:
+      properties:
+        reg:
+          items:
+            - items:
+                - $ref: /schemas/types.yaml#/definitions/cell
+                - const: 0x84
+
+    else:
+      properties:
+        reg:
+          items:
+            - items:
+                - $ref: /schemas/types.yaml#/definitions/cell
+                - enum:
+                    - 0x4
+                    - 0x10
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@d0072004 {
+      compatible = "marvell,orion-mdio";
+      reg = <0xd0072004 0x84>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <30>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+
+      phy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
new file mode 100644
index 0000000000..4eadafc43d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
+
+maintainers:
+  - Marcin Wojtas <mw@semihalf.com>
+  - Russell King <linux@armlinux.org>
+
+description: |
+  Marvell Armada 375 Ethernet Controller (PPv2.1)
+  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+  Marvell CN913X Ethernet Controller (PPv2.3)
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-375-pp2
+      - marvell,armada-7k-pp22
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: main controller clock
+      - description: GOP clock
+      - description: MG clock
+      - description: MG Core clock
+      - description: AXI clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pp_clk
+      - const: gop_clk
+      - const: mg_clk
+      - const: mg_core_clk
+      - const: axi_clk
+
+  dma-coherent: true
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the system controller.
+
+patternProperties:
+  '^(ethernet-)?port@[0-2]$':
+    type: object
+    description: subnode for each ethernet port.
+    $ref: ethernet-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: ID of the port from the MAC point of view.
+        maximum: 2
+
+      interrupts:
+        minItems: 1
+        maxItems: 10
+        description: interrupt(s) for the port
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: hif0
+          - const: hif1
+          - const: hif2
+          - const: hif3
+          - const: hif4
+          - const: hif5
+          - const: hif6
+          - const: hif7
+          - const: hif8
+          - const: link
+
+        description: >
+          if more than a single interrupt for is given, must be the
+          name associated to the interrupts listed. Valid names are:
+          "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+          "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+          for backward compatibility but shouldn't be used for new
+          additions.
+
+      phys:
+        minItems: 1
+        maxItems: 2
+        description: >
+          Generic PHY, providing SerDes connectivity. For most modes,
+          one lane is sufficient, but some (e.g. RXAUI) may require two.
+
+      phy-mode:
+        enum:
+          - gmii
+          - sgmii
+          - rgmii-id
+          - 1000base-x
+          - 2500base-x
+          - 5gbase-r
+          - rxaui
+          - 10gbase-r
+
+      port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        deprecated: true
+        description: >
+          ID of the port from the MAC point of view.
+          Legacy binding for backward compatibility.
+
+      marvell,loopback:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: port is loopback mode.
+
+      gop-port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          only for marvell,armada-7k-pp22, ID of the port from the
+          GOP (Group Of Ports) point of view. This ID is used to index the
+          per-port registers in the second register area.
+
+    required:
+      - reg
+      - interrupts
+      - phy-mode
+      - port-id
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: marvell,armada-7k-pp22
+    then:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: Networking interfaces registers
+            - description: CM3 address space used for TX Flow Control
+
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+
+      patternProperties:
+        '^(ethernet-)?port@[0-2]$':
+          required:
+            - gop-port-id
+
+      required:
+        - marvell,system-controller
+    else:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: LMS registers
+            - description: Register area per eth0
+            - description: Register area per eth1
+
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+      patternProperties:
+        '^(ethernet-)?port@[0-1]$':
+          properties:
+            reg:
+              maximum: 1
+
+            gop-port-id: false
+
+additionalProperties: false
+
+examples:
+  - |
+    // For Armada 375 variant
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@f0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-375-pp2";
+        reg = <0xf0000 0xa000>,
+              <0xc0000 0x3060>,
+              <0xc4000 0x100>,
+              <0xc5000 0x100>;
+        clocks = <&gateclk 3>, <&gateclk 19>;
+        clock-names = "pp_clk", "gop_clk";
+
+        ethernet-port@0 {
+            interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            phy = <&phy0>;
+            phy-mode = "rgmii-id";
+        };
+
+        ethernet-port@1 {
+            interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            phy = <&phy3>;
+            phy-mode = "gmii";
+        };
+    };
+
+  - |
+    // For Armada 7k/8k and Cn913x variants
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-7k-pp22";
+        reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+        clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>,
+                 <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>;
+        clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
+        marvell,system-controller = <&cp0_syscon0>;
+
+        ethernet-port@0 {
+            interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "10gbase-r";
+            phys = <&cp0_comphy4 0>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            gop-port-id = <0>;
+        };
+
+        ethernet-port@1 {
+            interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "rgmii-id";
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            gop-port-id = <2>;
+        };
+
+        ethernet-port@2 {
+            interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "2500base-x";
+            managed = "in-band-status";
+            phys = <&cp0_comphy5 2>;
+            sfp = <&sfp_eth3>;
+            reg = <2>;
+            port-id = <2>; /* For backward compatibility. */
+            gop-port-id = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.yaml b/Documentation/devicetree/bindings/net/marvell,prestera.yaml
new file mode 100644
index 0000000000..5ea8b73663
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,prestera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Prestera switch family
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - marvell,prestera-98dx3236
+              - marvell,prestera-98dx3336
+              - marvell,prestera-98dx4251
+          - const: marvell,prestera
+      - enum:
+          - pci11ab,c804
+          - pci11ab,c80c
+          - pci11ab,cc1e
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  dfx:
+    description: Reference to the DFX Server bus node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: marvell,prestera
+
+# Memory mapped AlleyCat3 family
+then:
+  properties:
+    nvmem-cells: false
+    nvmem-cell-names: false
+  required:
+    - interrupts
+
+# PCI Aldrin family
+else:
+  properties:
+    interrupts: false
+    dfx: false
+
+required:
+  - compatible
+  - reg
+
+# Ports can also be described
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    packet-processor@0 {
+        compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+        reg = <0 0x4000000>;
+        interrupts = <33>, <34>, <35>;
+        dfx = <&dfx>;
+    };
+
+  - |
+    pcie@0 {
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        device_type = "pci";
+
+        switch@0,0 {
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            compatible = "pci11ab,c80c";
+            nvmem-cells = <&mac_address 0>;
+            nvmem-cell-names = "mac-address";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
new file mode 100644
index 0000000000..2bf31572b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -0,0 +1,50 @@
+* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA)
+
+Required properties:
+- compatible: could be one of the following:
+	"marvell,armada-370-neta"
+	"marvell,armada-xp-neta"
+	"marvell,armada-3700-neta"
+	"marvell,armada-ac5-neta"
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+- phy: See ethernet.txt file in the same directory.
+- phy-mode: See ethernet.txt file in the same directory
+- clocks: List of clocks for this device. At least one clock is
+  mandatory for the core clock. If several clocks are given, then the
+  clock-names property must be used to identify them.
+
+Optional properties:
+- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
+  Value is presented in bytes. If not used, by default 1600B is set for
+  "marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+  "core" for core clock and "bus" for the optional bus clock.
+- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt
+
+Optional properties (valid only for Armada XP/38x):
+
+- buffer-manager: a phandle to a buffer manager node. Please refer to
+  Documentation/devicetree/bindings/net/marvell-neta-bm.txt
+- bm,pool-long: ID of a pool, that will accept all packets of a size
+  higher than 'short' pool's threshold (if set) and up to MTU value.
+  Obligatory, when the port is supposed to use hardware
+  buffer management.
+- bm,pool-short: ID of a pool, that will be used for accepting
+  packets of a size lower than given threshold. If not set, the port
+  will use a single 'long' pool for all packets, as defined above.
+
+Example:
+
+ethernet@70000 {
+	compatible = "marvell,armada-370-neta";
+	reg = <0x70000 0x2500>;
+	interrupts = <8>;
+	clocks = <&gate_clk 4>;
+	tx-csum-limit = <9800>
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml
new file mode 100644
index 0000000000..188a42ca6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Bluetooth chips
+
+description: |
+  This documents the binding structure and common properties for serial
+  attached Marvell Bluetooth devices.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - mrvl,88w8897
+      - mrvl,88w8997
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mrvl,88w8997
+    then:
+      properties:
+        max-speed: true
+    else:
+      properties:
+        max-speed: false
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      bluetooth {
+        compatible = "mrvl,88w8897";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
new file mode 100644
index 0000000000..957e5e5c29
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
@@ -0,0 +1,83 @@
+Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based)
+------
+The 8997 devices supports multiple interfaces. When used on SDIO interfaces,
+the btmrvl driver is used and when used on USB interface, the btusb driver is
+used.
+
+Required properties:
+
+  - compatible : should be one of the following:
+	* "marvell,sd8897-bt" (for SDIO)
+	* "marvell,sd8997-bt" (for SDIO)
+	* "usb1286,204e"      (for USB)
+
+Optional properties:
+
+  - marvell,cal-data: Calibration data downloaded to the device during
+		      initialization. This is an array of 28 values(u8).
+		      This is only applicable to SDIO devices.
+
+  - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
+		        firmware will use the pin to wakeup host system (u16).
+  - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
+		      platform. The value will be configured to firmware. This
+		      is needed to work chip's sleep feature as expected (u16).
+  - interrupt-names: Used only for USB based devices (See below)
+  - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the
+		 driver will use the first interrupt specified in the interrupt
+		 array. For USB based devices, the driver will use the interrupt
+		 named "wakeup" from the interrupt-names and interrupt arrays.
+		 The driver will request an irq based on this interrupt number.
+		 During system suspend, the irq will be enabled so that the
+		 bluetooth chip can wakeup host platform under certain
+		 conditions. During system resume, the irq will be disabled
+		 to make sure unnecessary interrupt is not received.
+
+Example:
+
+IRQ pin 119 is used as system wakeup source interrupt.
+wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host
+using this device side pin and wakeup latency.
+
+Example for SDIO device follows (calibration data is also available in
+below example).
+
+&mmc3 {
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	btmrvl: bluetooth@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&pio>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+		marvell,cal-data = /bits/ 8 <
+			0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
+			0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
+			0x00 0x00 0xf0 0x00>;
+		marvell,wakeup-pin = /bits/ 16 <0x0d>;
+		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
+	};
+};
+
+Example for USB device:
+
+&usb_host1_ohci {
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    mvl_bt1: bt@1 {
+	compatible = "usb1286,204e";
+	reg = <1>;
+	interrupt-parent = <&gpio0>;
+	interrupt-names = "wakeup";
+	interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+	marvell,wakeup-pin = /bits/ 16 <0x0d>;
+	marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
+    };
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
new file mode 100644
index 0000000000..07b31050db
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
@@ -0,0 +1,47 @@
+* Marvell Armada 380/XP Buffer Manager driver (BM)
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-neta-bm".
+- reg: address and length of the register set for the device.
+- clocks: a pointer to the reference clock for this device.
+- internal-mem: a phandle to BM internal SRAM definition.
+
+Optional properties (port):
+
+- pool<0 : 3>,capacity: size of external buffer pointers' ring maintained
+  in DRAM. Can be set for each pool (id 0 : 3) separately. The value has
+  to be chosen between 128 and 16352 and it also has to be aligned to 32.
+  Otherwise the driver would adjust a given number or choose default if
+  not set.
+- pool<0 : 3>,pkt-size: maximum size of a packet accepted by a given buffer
+  pointers' pool (id 0 : 3). It will be taken into consideration only when pool
+  type is 'short'. For 'long' ones it would be overridden by port's MTU.
+  If not set a driver will choose a default value.
+
+In order to see how to hook the BM to a given ethernet port, please
+refer to Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt.
+
+Example:
+
+- main node:
+
+bm: bm@c8000 {
+	compatible = "marvell,armada-380-neta-bm";
+	reg = <0xc8000 0xac>;
+	clocks = <&gateclk 13>;
+	internal-mem = <&bm_bppi>;
+	pool2,capacity = <4096>;
+	pool1,pkt-size = <512>;
+};
+
+- internal SRAM node:
+
+bm_bppi: bm-bppi {
+	compatible = "mmio-sram";
+	reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+	ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&gateclk 13>;
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-net.txt b/Documentation/devicetree/bindings/net/marvell-orion-net.txt
new file mode 100644
index 0000000000..6fd988c84c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-orion-net.txt
@@ -0,0 +1,83 @@
+Marvell Orion/Discovery ethernet controller
+=============================================
+
+The Marvell Discovery ethernet controller can be found on Marvell Orion SoCs
+(Kirkwood, Dove, Orion5x, and Discovery Innovation) and as part of Marvell
+Discovery system controller chips (mv64[345]60).
+
+The Discovery ethernet controller is described with two levels of nodes. The
+first level describes the ethernet controller itself and the second level
+describes up to 3 ethernet port nodes within that controller. The reason for
+the multiple levels is that the port registers are interleaved within a single
+set of controller registers. Each port node describes port-specific properties.
+
+Note: The above separation is only true for Discovery system controllers.
+For Orion SoCs we stick to the separation, although there each controller has
+only one port associated. Multiple ports are implemented as multiple single-port
+controllers. As Kirkwood has some issues with proper initialization after reset,
+an extra compatible string is added for it.
+
+* Ethernet controller node
+
+Required controller properties:
+ - #address-cells: shall be 1.
+ - #size-cells: shall be 0.
+ - compatible: shall be one of "marvell,orion-eth", "marvell,kirkwood-eth".
+ - reg: address and length of the controller registers.
+
+Optional controller properties:
+ - clocks: phandle reference to the controller clock.
+ - marvell,tx-checksum-limit: max tx packet size for hardware checksum.
+
+* Ethernet port node
+
+Required port properties:
+ - compatible: shall be one of "marvell,orion-eth-port",
+      "marvell,kirkwood-eth-port".
+ - reg: port number relative to ethernet controller, shall be 0, 1, or 2.
+ - interrupts: port interrupt.
+ - local-mac-address: See ethernet.txt file in the same directory.
+
+Optional port properties:
+ - marvell,tx-queue-size: size of the transmit ring buffer.
+ - marvell,tx-sram-addr: address of transmit descriptor buffer located in SRAM.
+ - marvell,tx-sram-size: size of transmit descriptor buffer located in SRAM.
+ - marvell,rx-queue-size: size of the receive ring buffer.
+ - marvell,rx-sram-addr: address of receive descriptor buffer located in SRAM.
+ - marvell,rx-sram-size: size of receive descriptor buffer located in SRAM.
+
+and
+
+ - phy-handle: See ethernet.txt file in the same directory.
+ - phy-mode: See ethernet.txt file in the same directory.
+
+or
+
+ - speed: port speed if no PHY connected.
+ - duplex: port mode if no PHY connected.
+
+* Node example:
+
+mdio-bus {
+	...
+	ethphy: ethernet-phy@8 {
+		...
+	};
+};
+
+eth: ethernet-controller@72000 {
+	compatible = "marvell,orion-eth";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x72000 0x2000>;
+	clocks = <&gate_clk 2>;
+	marvell,tx-checksum-limit = <1600>;
+
+	ethernet@0 {
+		compatible = "marvell,orion-eth-port";
+		reg = <0>;
+		interrupts = <29>;
+		phy-handle = <&ethphy>;
+		local-mac-address = [00 00 00 00 00 00];
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/Documentation/devicetree/bindings/net/marvell-pxa168.txt
new file mode 100644
index 0000000000..5574af3554
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-pxa168.txt
@@ -0,0 +1,38 @@
+* Marvell PXA168 Ethernet Controller
+
+Required properties:
+- compatible: should be "marvell,pxa168-eth".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- clocks: pointer to the clock for the device.
+
+Optional properties:
+- port-id: Ethernet port number. Should be '0','1' or '2'.
+- #address-cells: must be 1 when using sub-nodes.
+- #size-cells: must be 0 when using sub-nodes.
+- phy-handle: see ethernet.txt file in the same directory.
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Sub-nodes:
+Each PHY can be represented as a sub-node. This is not mandatory.
+
+Sub-nodes required properties:
+- reg: the MDIO address of the PHY.
+
+Example:
+
+	eth0: ethernet@f7b90000 {
+		compatible = "marvell,pxa168-eth";
+		reg = <0xf7b90000 0x10000>;
+		clocks = <&chip CLKID_GETH0>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy-handle = <&ethphy0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/maxim,ds26522.txt b/Documentation/devicetree/bindings/net/maxim,ds26522.txt
new file mode 100644
index 0000000000..ee8bb725f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/maxim,ds26522.txt
@@ -0,0 +1,13 @@
+* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver
+
+Required properties:
+- compatible: Should contain "maxim,ds26522".
+- reg: SPI CS.
+- spi-max-frequency: SPI clock.
+
+Example:
+	slic@1 {
+		compatible = "maxim,ds26522";
+		reg = <1>;
+		spi-max-frequency = <2000000>; /* input clock */
+	};
diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
new file mode 100644
index 0000000000..8a3713abd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/maxlinear,gpy2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MaxLinear GPY2xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Michael Walle <michael@walle.cc>
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  maxlinear,use-broken-interrupts:
+    description: |
+      Interrupts are broken on some GPY2xx PHYs in that they keep the
+      interrupt line asserted for a random amount of time even after the
+      interrupt status register is cleared. Thus it is blocking the
+      interrupt line which is usually bad for shared lines. By default,
+      interrupts are disabled for this PHY and polling mode is used. If one
+      can live with the consequences, this property can be used to enable
+      interrupt handling.
+
+      Affected PHYs (as far as known) are GPY215B and GPY215C.
+    type: boolean
+
+dependencies:
+  maxlinear,use-broken-interrupts: [ interrupts ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            reg = <0>;
+            interrupts-extended = <&intc 0>;
+            maxlinear,use-broken-interrupts;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
new file mode 100644
index 0000000000..8438af53c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCTP I2C transport
+
+maintainers:
+  - Matt Johnston <matt@codeconstruct.com.au>
+
+description: |
+  An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller.
+  MCTP I2C is specified by DMTF DSP0237.
+
+  An mctp-i2c-controller must be attached to an I2C adapter which supports
+  slave functionality. I2C busses (either directly or as subordinate mux
+  busses) are attached to the mctp-i2c-controller with a 'mctp-controller'
+  property on each used bus. Each mctp-controller I2C bus will be presented
+  to the host system as a separate MCTP I2C instance.
+
+properties:
+  compatible:
+    const: mctp-i2c-controller
+
+  reg:
+    minimum: 0x40000000
+    maximum: 0x4000007f
+    description: |
+      7 bit I2C address of the local endpoint.
+      I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    // Basic case of a single I2C bus
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@30 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+  - |
+    // Mux topology with multiple MCTP-handling busses under
+    // a single mctp-i2c-controller.
+    // i2c1 and i2c6 can have MCTP devices, i2c5 does not.
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c1: i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@50 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+    i2c-mux {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      i2c-parent = <&i2c1>;
+
+      i2c5: i2c@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+        eeprom@33 {
+          reg = <0x33>;
+        };
+      };
+
+      i2c6: i2c@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+        mctp-controller;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
new file mode 100644
index 0000000000..eb4171a194
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO on GPIOs
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+  - Russell King <linux@armlinux.org.uk>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - virtual,mdio-gpio
+      - microchip,mdio-smi0
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpios:
+    minItems: 2
+    items:
+      - description: MDC
+      - description: MDIO
+      - description: MDO
+
+# Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+# node.
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    aliases {
+        mdio-gpio0 = &mdio0;
+    };
+
+    mdio0: mdio {
+      compatible = "virtual,mdio-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gpios = <&qe_pio_a 11>,
+              <&qe_pio_c 6>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
new file mode 100644
index 0000000000..71c25c4580
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description:
+  This is a special case of a MDIO bus multiplexer.  One or more GPIO
+  lines are used to control which child bus is connected.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: mdio-mux-gpio
+
+  gpios:
+    description:
+      List of GPIOs used to control the multiplexer, least significant bit first.
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
+     pair of GPIO lines.  Child busses 2 and 3 populated with 4
+     PHYs each.
+     */
+    mdio-mux {
+        compatible = "mdio-mux-gpio";
+        gpios = <&gpio1 3 0>, <&gpio1 4 0>;
+        mdio-parent-bus = <&smi1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@2 {
+            reg = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                reg = <1>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@2 {
+                reg = <2>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@3 {
+                reg = <3>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+            ethernet-phy@4 {
+                reg = <4>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <10 8>; /* Pin 10, active low */
+            };
+        };
+
+        mdio@3 {
+            reg = <3>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                reg = <1>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@2 {
+                reg = <2>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@3 {
+                reg = <3>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+            ethernet-phy@4 {
+                reg = <4>;
+                marvell,reg-init = <3 0x10 0 0x5777>,
+                  <3 0x11 0 0x00aa>,
+                  <3 0x12 0 0x4105>,
+                  <3 0x13 0 0x0a60>;
+                interrupt-parent = <&gpio>;
+                interrupts = <12 8>; /* Pin 12, active low */
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml
new file mode 100644
index 0000000000..cf86bb0b0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-mmioreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer controlled by a memory-mapped device
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  This is a special case of a MDIO bus multiplexer.  A memory-mapped device,
+  like an FPGA, is used to control which child bus is connected.  The mdio-mux
+  node must be a child of the memory-mapped device.  The driver currently only
+  supports devices with 8, 16 or 32-bit registers.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: mdio-mux-mmioreg
+      - const: mdio-mux
+
+  reg:
+    description: Contains the offset of the register that controls the bus
+      multiplexer. The size field in the 'reg' property is the size of register,
+      and must therefore be 1, 2, or 4.
+    maxItems: 1
+
+  mux-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Contains an eight-bit mask that specifies which bits in the
+      register control the actual bus multiplexer.  The 'reg' property of each
+      child mdio-mux node must be constrained by this mask.
+
+required:
+  - compatible
+  - reg
+  - mux-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio-mux@9 {
+        compatible = "mdio-mux-mmioreg", "mdio-mux";
+        mdio-parent-bus = <&xmdio0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <9 1>; // BRDCFG1
+        mux-mask = <0x6>; // EMI2
+
+        mdio@0 {  // Slot 1 XAUI (FM2)
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy_xgmii_slot1: ethernet-phy@4 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <4>;
+            };
+        };
+
+        mdio@2 {  // Slot 2 XAUI (FM1)
+            reg = <2>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@4 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <4>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
new file mode 100644
index 0000000000..282987074e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux-multiplexer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Properties for an MDIO bus multiplexer consumer device
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  This is a special case of MDIO mux when MDIO mux is defined as a consumer
+  of a mux producer device. The mux producer can be of any type like mmio mux
+  producer, gpio mux producer or generic register based mux producer.
+
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: mdio-mux-multiplexer
+
+  mux-controls:
+    maxItems: 1
+
+required:
+  - compatible
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mux: mux-controller { // Mux Producer
+        compatible = "reg-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+                        <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+    };
+
+    mdio-mux-1 { // Mux consumer
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux 0>;
+        mdio-parent-bus = <&emdio1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@8 {
+            reg = <0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+    mdio-mux-2 { // Mux consumer
+        compatible = "mdio-mux-multiplexer";
+        mux-controls = <&mux 1>;
+        mdio-parent-bus = <&emdio2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml
new file mode 100644
index 0000000000..4321c87de8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common MDIO bus multiplexer/switch properties.
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |+
+  An MDIO bus multiplexer/switch will have several child busses that are
+  numbered uniquely in a device dependent manner.  The nodes for an MDIO
+  bus multiplexer/switch will have one child node for each child bus.
+
+properties:
+  mdio-parent-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the MDIO bus that this multiplexer's master-side port is
+      connected to.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^mdio@[0-9a-f]+$':
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
new file mode 100644
index 0000000000..cf8a010548
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio.txt
@@ -0,0 +1 @@
+This file has moved to mdio.yaml.
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
new file mode 100644
index 0000000000..a266ade918
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO Bus Common Properties
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  These are generic properties that can apply to any MDIO bus. Any
+  MDIO bus must have a list of child nodes, one per device on the
+  bus. These should follow the generic ethernet-phy.yaml document, or
+  a device specific binding document.
+
+properties:
+  $nodename:
+    pattern: "^mdio(@.*)?"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      The phandle and specifier for the GPIO that controls the RESET
+      lines of all devices on that MDIO bus.
+
+  reset-delay-us:
+    description:
+      RESET pulse width in microseconds. It applies to all MDIO devices
+      and must therefore be appropriately determined based on all devices
+      requirements (maximum value of all per-device RESET pulse widths).
+
+  reset-post-delay-us:
+    description:
+      Delay after reset deassert in microseconds. It applies to all MDIO
+      devices and it's determined by how fast all devices are ready for
+      communication. This delay happens just before e.g. Ethernet PHY
+      type ID auto detection.
+
+  clock-frequency:
+    description:
+      Desired MDIO bus clock frequency in Hz. Values greater than IEEE 802.3
+      defined 2.5MHz should only be used when all devices on the bus support
+      the given clock speed.
+
+  suppress-preamble:
+    description:
+      The 32 bit preamble should be suppressed. In order for this to
+      work, all devices on the bus must support suppressed preamble.
+    type: boolean
+
+patternProperties:
+  '@[0-9a-f]+$':
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 31
+        description:
+          The ID number for the device.
+
+      broken-turn-around:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          If set, indicates the MDIO device does not correctly release
+          the turn around line low at end of the control phase of the
+          MDIO transaction.
+
+      reset-gpios:
+        maxItems: 1
+        description:
+          The GPIO phandle and specifier for the MDIO reset signal.
+
+      reset-assert-us:
+        description:
+          Delay after the reset was asserted in microseconds. If this
+          property is missing the delay will be skipped.
+
+      reset-deassert-us:
+        description:
+          Delay after the reset was deasserted in microseconds. If
+          this property is missing the delay will be skipped.
+
+    required:
+      - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    davinci_mdio: mdio@5c030000 {
+        reg = <0x5c030000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        reset-gpios = <&gpio2 5 1>;
+        reset-delay-us = <2>;
+
+        ethphy0: ethernet-phy@1 {
+            reg = <1>;
+        };
+
+        ethphy1: ethernet-phy@3 {
+            reg = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
new file mode 100644
index 0000000000..e74502a0af
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -0,0 +1,579 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Frame Engine Ethernet controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
+  have dual GMAC ports.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-eth
+      - mediatek,mt7623-eth
+      - mediatek,mt7621-eth
+      - mediatek,mt7622-eth
+      - mediatek,mt7629-eth
+      - mediatek,mt7981-eth
+      - mediatek,mt7986-eth
+      - mediatek,mt7988-eth
+      - ralink,rt5350-eth
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+  clock-names: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: fe
+      - const: gmac
+      - const: ppe
+
+  mediatek,ethsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon node that handles the port setup.
+
+  cci-control-port: true
+
+  mediatek,hifsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek hifsys controller used to provide various clocks
+      and reset to the system.
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon node that handles the path from GMAC to
+      PHY variants.
+
+  mediatek,sgmiisys:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      A list of phandle to the syscon node that handles the SGMII setup which is required for
+      those SoCs equipped with SGMII.
+
+  mediatek,wed:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      List of phandles to wireless ethernet dispatch nodes.
+
+  mediatek,wed-pcie:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek wed-pcie controller.
+
+  dma-coherent: true
+
+  mdio-bus:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-eth
+              - mediatek,mt7623-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 4
+          maxItems: 4
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp1
+            - const: gp2
+
+        mediatek,infracfg: false
+
+        mediatek,pctl:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the ports slew rate and
+            driver current.
+
+        mediatek,wed: false
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7621-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        clocks:
+          minItems: 2
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: fe
+
+        mediatek,infracfg: false
+
+        mediatek,wed: false
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 11
+          maxItems: 11
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,infracfg: false
+
+        mediatek,sgmiisys:
+          minItems: 1
+          maxItems: 1
+
+        mediatek,pcie-mirror:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the mediatek pcie-mirror controller.
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7629-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 17
+          maxItems: 17
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: sgmiitop
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: fe
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+        mediatek,wed: false
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7981-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 15
+          maxItems: 15
+
+        clock-names:
+          items:
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: wocpu0
+            - const: sgmii_ck
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: netsys0
+            - const: netsys1
+
+        mediatek,infracfg: false
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7986-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 15
+          maxItems: 15
+
+        clock-names:
+          items:
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: wocpu1
+            - const: wocpu0
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: netsys0
+            - const: netsys1
+
+        mediatek,infracfg: false
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7988-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 34
+          maxItems: 34
+
+        clock-names:
+          items:
+            - const: crypto
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: gp3
+            - const: ethwarp_wocpu2
+            - const: ethwarp_wocpu1
+            - const: ethwarp_wocpu0
+            - const: esw
+            - const: netsys0
+            - const: netsys1
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: top_usxgmii0_sel
+            - const: top_usxgmii1_sel
+            - const: top_sgm0_sel
+            - const: top_sgm1_sel
+            - const: top_xfi_phy0_xtal_sel
+            - const: top_xfi_phy1_xtal_sel
+            - const: top_eth_gmii_sel
+            - const: top_eth_refck_50m_sel
+            - const: top_eth_sys_200m_sel
+            - const: top_eth_sys_sel
+            - const: top_eth_xgmii_sel
+            - const: top_eth_mii_sel
+            - const: top_netsys_sel
+            - const: top_netsys_500m_sel
+            - const: top_netsys_pao_2x_sel
+            - const: top_netsys_sync_250m_sel
+            - const: top_netsys_ppefb_250m_sel
+            - const: top_netsys_warp_sel
+            - const: wocpu1
+            - const: wocpu0
+            - const: xgp1
+            - const: xgp2
+            - const: xgp3
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+patternProperties:
+  "^mac@[0-1]$":
+    type: object
+    unevaluatedProperties: false
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    description:
+      Ethernet MAC node
+    properties:
+      compatible:
+        const: mediatek,eth-mac
+
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,ethsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/power/mt7622-power.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      ethernet: ethernet@1b100000 {
+        compatible = "mediatek,mt7622-eth";
+        reg = <0 0x1b100000 0 0x20000>;
+        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_ETH_SEL>,
+                 <&ethsys CLK_ETH_ESW_EN>,
+                 <&ethsys CLK_ETH_GP0_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&sgmiisys CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys CLK_SGMII_CDR_REF>,
+                 <&sgmiisys CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_SGMIIPLL>,
+                 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+        clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+                      "eth2pll";
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys>;
+        cci-control-port = <&cci_control2>;
+        mediatek,pcie-mirror = <&pcie_mirror>;
+        mediatek,hifsys = <&hifsys>;
+        dma-coherent;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio0: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy0: ethernet-phy@0 {
+            reg = <0>;
+          };
+
+          phy1: ethernet-phy@1 {
+            reg = <1>;
+          };
+        };
+
+        gmac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy0>;
+          reg = <0>;
+        };
+
+        gmac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy1>;
+          reg = <1>;
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      eth: ethernet@15100000 {
+        #define CLK_ETH_FE_EN               0
+        #define CLK_ETH_WOCPU1_EN           3
+        #define CLK_ETH_WOCPU0_EN           4
+        #define CLK_TOP_NETSYS_SEL          43
+        #define CLK_TOP_NETSYS_500M_SEL     44
+        #define CLK_TOP_NETSYS_2X_SEL       46
+        #define CLK_TOP_SGM_325M_SEL        47
+        #define CLK_APMIXED_NET2PLL         1
+        #define CLK_APMIXED_SGMPLL          3
+
+        compatible = "mediatek,mt7986-eth";
+        reg = <0 0x15100000 0 0x80000>;
+        interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ethsys CLK_ETH_FE_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_WOCPU1_EN>,
+                 <&ethsys CLK_ETH_WOCPU0_EN>,
+                 <&sgmiisys0 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+                 <&sgmiisys1 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>;
+        clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb",
+                      "sgmii2_tx250m", "sgmii2_rx250m",
+                      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+                      "netsys0", "netsys1";
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+        assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+                          <&topckgen CLK_TOP_SGM_325M_SEL>;
+        assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+                                 <&apmixedsys CLK_APMIXED_SGMPLL>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy5: ethernet-phy@0 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reset-gpios = <&pio 6 1>;
+            reset-deassert-us = <20000>;
+            reg = <5>;
+          };
+
+          phy6: ethernet-phy@1 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reg = <6>;
+          };
+        };
+
+        mac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy5>;
+          reg = <0>;
+        };
+
+        mac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy6>;
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
new file mode 100644
index 0000000000..2e889f9a56
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,star-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek STAR Ethernet MAC Controller
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description:
+  This Ethernet MAC is used on the MT8* family of SoCs from MediaTek.
+  It's compliant with 802.3 standards and supports half- and full-duplex
+  modes with flow-control as well as CRC offloading and VLAN tags.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8516-eth
+      - mediatek,mt8518-eth
+      - mediatek,mt8175-eth
+      - mediatek,mt8365-eth
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    additionalItems: false
+    items:
+      - const: core
+      - const: reg
+      - const: trans
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the device containing the PERICFG register range. This is used
+      to control the MII mode.
+
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rxc-inverse:
+    type: boolean
+    description:
+      If present, indicates that clock on RXC pad will be inversed.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that clock on TXC pad will be inversed.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,pericfg
+  - phy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8516-clk.h>
+
+    ethernet: ethernet@11180000 {
+        compatible = "mediatek,mt8516-eth";
+        reg = <0x11180000 0x1000>;
+        mediatek,pericfg = <&pericfg>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RG_ETH>,
+                 <&topckgen CLK_TOP_66M_ETH>,
+                 <&topckgen CLK_TOP_133M_ETH>;
+        clock-names = "core", "reg", "trans";
+        phy-handle = <&eth_phy>;
+        phy-mode = "rmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
new file mode 100644
index 0000000000..9ef5bacda8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -0,0 +1,116 @@
+MediaTek SoC built-in Bluetooth Devices
+==================================
+
+This device is a serial attached device to BTIF device and thus it must be a
+child node of the serial node with BTIF. The dt-bindings details for BTIF
+device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
+
+Required properties:
+
+- compatible:	Must be
+		  "mediatek,mt7622-bluetooth": for MT7622 SoC
+- clocks:	Should be the clock specifiers corresponding to the entry in
+		clock-names property.
+- clock-names:	Should contain "ref" entries.
+- power-domains: Phandle to the power domain that the device is part of
+
+Example:
+
+	btif: serial@1100c000 {
+		compatible = "mediatek,mt7622-btif",
+			     "mediatek,mtk-btif";
+		reg = <0 0x1100c000 0 0x1000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_BTIF_PD>;
+		clock-names = "main";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+
+		bluetooth {
+			compatible = "mediatek,mt7622-bluetooth";
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+			clocks = <&clk25m>;
+			clock-names = "ref";
+		};
+	};
+
+MediaTek UART based Bluetooth Devices
+==================================
+
+This device is a serial attached device to UART device and thus it must be a
+child node of the serial node with UART.
+
+Please refer to the following documents for generic properties:
+
+	Documentation/devicetree/bindings/serial/serial.yaml
+
+Required properties:
+
+- compatible:	Must be
+		  "mediatek,mt7663u-bluetooth": for MT7663U device
+		  "mediatek,mt7668u-bluetooth": for MT7668U device
+- vcc-supply:	Main voltage regulator
+
+If the pin controller on the platform can support both pinmux and GPIO
+control such as the most of MediaTek platform. Please use below properties.
+
+- pinctrl-names: Should be "default", "runtime"
+- pinctrl-0: Should contain UART RXD low when the device is powered up to
+	     enter proper bootstrap mode.
+- pinctrl-1: Should contain UART mode pin ctrl
+
+Else, the pin controller on the platform only can support pinmux control and
+the GPIO control still has to rely on the dedicated GPIO controller such as
+a legacy MediaTek SoC, MT7621. Please use the below properties.
+
+- boot-gpios:	GPIO same to the pin as UART RXD and used to keep LOW when
+		the device is powered up to enter proper bootstrap mode when
+- pinctrl-names: Should be "default"
+- pinctrl-0: Should contain UART mode pin ctrl
+
+Optional properties:
+
+- reset-gpios:	GPIO used to reset the device whose initial state keeps low,
+		if the GPIO is missing, then board-level design should be
+		guaranteed.
+- clocks:	Should be the clock specifiers corresponding to the entry in
+		clock-names property. If the clock is missing, then board-level
+		design should be guaranteed.
+- clock-names:	Should contain "osc" entry for the external oscillator.
+- current-speed:  Current baud rate of the device whose defaults to 921600
+
+Example:
+
+	uart1_pins_boot: uart1-default {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_GPIO81>;
+			output-low;
+		};
+	};
+
+	uart1_pins_runtime: uart1-runtime {
+		pins-dat {
+			pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+				 <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+		};
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_UART1_SEL>,
+			 <&pericfg CLK_PERI_UART1>;
+		clock-names = "baud", "bus";
+
+		bluetooth {
+			compatible = "mediatek,mt7663u-bluetooth";
+			vcc-supply = <&reg_5v>;
+			reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default", "runtime";
+			pinctrl-0 = <&uart1_pins_boot>;
+			pinctrl-1 = <&uart1_pins_runtime>;
+			current-speed = <921600>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
new file mode 100644
index 0000000000..ed9d845f60
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DWMAC glue layer controller
+
+maintainers:
+  - Biao Huang <biao.huang@mediatek.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2712-gmac
+          - mediatek,mt8188-gmac
+          - mediatek,mt8195-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-gmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+      - items:
+          - enum:
+              - mediatek,mt8188-gmac
+          - const: mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 5
+    items:
+      - description: AXI clock
+      - description: APB clock
+      - description: MAC Main clock
+      - description: PTP clock
+      - description: RMII reference clock provided by MAC
+      - description: MAC clock gate
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: axi
+      - const: apb
+      - const: mac_main
+      - const: ptp_ref
+      - const: rmii_internal
+      - const: mac_cg
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the syscon node that control ethernet
+      interface and timing delay.
+
+  mediatek,tx-delay-ps:
+    description:
+      The internal TX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290,
+      or will round down. Range 0~31*290.
+
+  mediatek,rx-delay-ps:
+    description:
+      The internal RX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple
+      of 290, or will round down. Range 0~31*290.
+
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rmii-clk-from-mac:
+    type: boolean
+    description:
+      If present, indicates that MAC provides the RMII reference clock, which
+      outputs to TXC pin only.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. tx clock will be inversed in MII/RGMII case,
+      2. tx clock inside MAC will be inversed relative to reference clock
+         which is from external PHYs in RMII case, and it rarely happen.
+      3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+         when the reference clock is from MAC.
+
+  mediatek,rxc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. rx clock will be inversed in MII/RGMII case.
+      2. reference clock will be inversed when arrived at MAC in RMII case, when
+         the reference clock is from external PHYs.
+      3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+         the reference clock is from MAC.
+
+  mediatek,mac-wol:
+    type: boolean
+    description:
+      If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled.
+      Otherwise, PHY WOL is preferred.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phy-mode
+  - mediatek,pericfg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    eth: ethernet@1101c000 {
+        compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+        reg = <0x1101c000 0x1300>;
+        interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "macirq";
+        phy-mode = "rgmii-rxid";
+        mac-address = [00 55 7b b5 7d f7];
+        clock-names = "axi",
+                      "apb",
+                      "mac_main",
+                      "ptp_ref",
+                      "rmii_internal";
+        clocks = <&pericfg CLK_PERI_GMAC>,
+                 <&pericfg CLK_PERI_GMAC_PCLK>,
+                 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+                                 <&topckgen CLK_TOP_APLL1_D3>,
+                                 <&topckgen CLK_TOP_ETHERPLL_50M>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+        mediatek,pericfg = <&pericfg>;
+        mediatek,tx-delay-ps = <1530>;
+        snps,txpbl = <1>;
+        snps,rxpbl = <1>;
+        snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+        snps,reset-delays-us = <0 10000 10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
new file mode 100644
index 0000000000..b726c6e146
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/micrel,ks8851.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Micrel KS8851 Ethernet MAC (SPI and Parallel bus options)
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - micrel,ks8851      # SPI bus option
+      - micrel,ks8851-mll  # Parallel bus option
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: SPI or Parallel bus hardware address
+      - description: Parallel bus command mode address
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      The reset_n input pin
+
+  vdd-supply:
+    description: |
+      Analog 3.3V supply for Ethernet MAC
+
+  vdd-io-supply:
+    description: |
+      Digital 1.8V IO supply for Ethernet MAC
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: micrel,ks8851
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
+      properties:
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: micrel,ks8851-mll
+    then:
+      $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+      properties:
+        reg:
+          minItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* SPI bus option */
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ethernet@0 {
+            compatible = "micrel,ks8851";
+            reg = <0>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <90 8>;
+            vdd-supply = <&ext_l2>;
+            vdd-io-supply = <&pm8921_lvs6>;
+            reset-gpios = <&msmgpio 89 0>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /* Parallel bus option */
+    memory-controller {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ethernet@1,0 {
+            compatible = "micrel,ks8851-mll";
+            reg = <1 0x0 0x2>, <1 0x2 0x20000>;
+            interrupt-parent = <&gpioc>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
new file mode 100644
index 0000000000..281bc2498d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
@@ -0,0 +1,20 @@
+Micrel KS8995 SPI controlled Ethernet Switch families
+
+Required properties (according to spi-bus.txt):
+- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
+
+Optional properties:
+- reset-gpios : phandle of gpio that will be used to reset chip during probe
+
+Example:
+
+spi-master {
+	...
+	switch@0 {
+		compatible = "micrel,ksz8795";
+
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
new file mode 100644
index 0000000000..2681168777
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -0,0 +1,228 @@
+Micrel KSZ9021/KSZ9031/KSZ9131 Gigabit Ethernet PHY
+
+Some boards require special tuning values, particularly when it comes
+to clock delays. You can specify clock delay values in the PHY OF
+device node. Deprecated, but still supported, these properties can
+also be added to an Ethernet OF device node.
+
+Note that these settings are applied after any phy-specific fixup from
+phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
+and therefore may overwrite them.
+
+KSZ9021:
+
+  All skew control options are specified in picoseconds. The minimum
+  value is 0, the maximum value is 3000, and it can be specified in 200ps
+  steps, *but* these values are in not fact what you get because this chip's
+  skew values actually increase in 120ps steps, starting from -840ps. The
+  incorrect values came from an error in the original KSZ9021 datasheet
+  before it was corrected in revision 1.2 (Feb 2014), but it is too late to
+  change the driver now because of the many existing device trees that have
+  been created using values that go up in increments of 200.
+
+  The following table shows the actual skew delay you will get for each of the
+  possible devicetree values, and the number that will be programmed into the
+  corresponding pad skew register:
+
+  Device Tree Value	Delay	Pad Skew Register Value
+  -----------------------------------------------------
+	0   		-840ps		0000
+	200 		-720ps		0001
+	400 		-600ps		0010
+	600 		-480ps		0011
+	800 		-360ps		0100
+	1000		-240ps		0101
+	1200		-120ps		0110
+	1400		   0ps		0111
+	1600		 120ps		1000
+	1800		 240ps		1001
+	2000		 360ps		1010
+	2200		 480ps		1011
+	2400		 600ps		1100
+	2600		 720ps		1101
+	2800		 840ps		1110
+	3000		 960ps		1111
+
+  Optional properties:
+
+    - rxc-skew-ps : Skew control of RXC pad
+    - rxdv-skew-ps : Skew control of RX CTL pad
+    - txc-skew-ps : Skew control of TXC pad
+    - txen-skew-ps : Skew control of TX CTL pad
+    - rxd0-skew-ps : Skew control of RX data 0 pad
+    - rxd1-skew-ps : Skew control of RX data 1 pad
+    - rxd2-skew-ps : Skew control of RX data 2 pad
+    - rxd3-skew-ps : Skew control of RX data 3 pad
+    - txd0-skew-ps : Skew control of TX data 0 pad
+    - txd1-skew-ps : Skew control of TX data 1 pad
+    - txd2-skew-ps : Skew control of TX data 2 pad
+    - txd3-skew-ps : Skew control of TX data 3 pad
+
+KSZ9031:
+
+  All skew control options are specified in picoseconds. The minimum
+  value is 0, and the maximum is property-dependent. The increment
+  step is 60ps. The default value is the neutral setting, so setting
+  rxc-skew-ps=<0> actually results in -900 picoseconds adjustment.
+
+  The KSZ9031 hardware supports a range of skew values from negative to
+  positive, where the specific range is property dependent. All values
+  specified in the devicetree are offset by the minimum value so they
+  can be represented as positive integers in the devicetree since it's
+  difficult to represent a negative number in the devictree.
+
+  The following 5-bit values table apply to rxc-skew-ps and txc-skew-ps.
+
+  Pad Skew Value	Delay (ps)	Devicetree Value
+  ------------------------------------------------------
+  0_0000		-900ps		0
+  0_0001		-840ps		60
+  0_0010		-780ps		120
+  0_0011		-720ps		180
+  0_0100		-660ps		240
+  0_0101		-600ps		300
+  0_0110		-540ps		360
+  0_0111		-480ps		420
+  0_1000		-420ps		480
+  0_1001		-360ps		540
+  0_1010		-300ps		600
+  0_1011		-240ps		660
+  0_1100		-180ps		720
+  0_1101		-120ps		780
+  0_1110		-60ps		840
+  0_1111		0ps		900
+  1_0000		60ps		960
+  1_0001		120ps		1020
+  1_0010		180ps		1080
+  1_0011		240ps		1140
+  1_0100		300ps		1200
+  1_0101		360ps		1260
+  1_0110		420ps		1320
+  1_0111		480ps		1380
+  1_1000		540ps		1440
+  1_1001		600ps		1500
+  1_1010		660ps		1560
+  1_1011		720ps		1620
+  1_1100		780ps		1680
+  1_1101		840ps		1740
+  1_1110		900ps		1800
+  1_1111		960ps		1860
+
+  The following 4-bit values table apply to the txdX-skew-ps, rxdX-skew-ps
+  data pads, and the rxdv-skew-ps, txen-skew-ps control pads.
+
+  Pad Skew Value	Delay (ps)	Devicetree Value
+  ------------------------------------------------------
+  0000			-420ps		0
+  0001			-360ps		60
+  0010			-300ps		120
+  0011			-240ps		180
+  0100			-180ps		240
+  0101			-120ps		300
+  0110			-60ps		360
+  0111			0ps		420
+  1000			60ps		480
+  1001			120ps		540
+  1010			180ps		600
+  1011			240ps		660
+  1100			300ps		720
+  1101			360ps		780
+  1110			420ps		840
+  1111			480ps		900
+
+  Optional properties:
+
+    Maximum value of 1860, default value 900:
+
+      - rxc-skew-ps : Skew control of RX clock pad
+      - txc-skew-ps : Skew control of TX clock pad
+
+    Maximum value of 900, default value 420:
+
+      - rxdv-skew-ps : Skew control of RX CTL pad
+      - txen-skew-ps : Skew control of TX CTL pad
+      - rxd0-skew-ps : Skew control of RX data 0 pad
+      - rxd1-skew-ps : Skew control of RX data 1 pad
+      - rxd2-skew-ps : Skew control of RX data 2 pad
+      - rxd3-skew-ps : Skew control of RX data 3 pad
+      - txd0-skew-ps : Skew control of TX data 0 pad
+      - txd1-skew-ps : Skew control of TX data 1 pad
+      - txd2-skew-ps : Skew control of TX data 2 pad
+      - txd3-skew-ps : Skew control of TX data 3 pad
+
+    - micrel,force-master:
+        Boolean, force phy to master mode. Only set this option if the phy
+        reference clock provided at CLK125_NDO pin is used as MAC reference
+        clock because the clock jitter in slave mode is to high (errata#2).
+        Attention: The link partner must be configurable as slave otherwise
+        no link will be established.
+
+KSZ9131:
+LAN8841:
+
+  All skew control options are specified in picoseconds. The increment
+  step is 100ps. Unlike KSZ9031, the values represent picoseccond delays.
+  A negative value can be assigned as rxc-skew-psec = <(-100)>;.
+
+  Optional properties:
+
+    Range of the value -700 to 2400, default value 0:
+
+      - rxc-skew-psec : Skew control of RX clock pad
+      - txc-skew-psec : Skew control of TX clock pad
+
+    Range of the value -700 to 800, default value 0:
+
+      - rxdv-skew-psec : Skew control of RX CTL pad
+      - txen-skew-psec : Skew control of TX CTL pad
+      - rxd0-skew-psec : Skew control of RX data 0 pad
+      - rxd1-skew-psec : Skew control of RX data 1 pad
+      - rxd2-skew-psec : Skew control of RX data 2 pad
+      - rxd3-skew-psec : Skew control of RX data 3 pad
+      - txd0-skew-psec : Skew control of TX data 0 pad
+      - txd1-skew-psec : Skew control of TX data 1 pad
+      - txd2-skew-psec : Skew control of TX data 2 pad
+      - txd3-skew-psec : Skew control of TX data 3 pad
+
+Examples:
+
+	/* Attach to an Ethernet device with autodetected PHY */
+	&enet {
+		rxc-skew-ps = <1800>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <1800>;
+		txen-skew-ps = <0>;
+		status = "okay";
+	};
+
+	/* Attach to an explicitly-specified PHY */
+	mdio {
+		phy0: ethernet-phy@0 {
+			rxc-skew-ps = <1800>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <1800>;
+			txen-skew-ps = <0>;
+			reg = <0>;
+		};
+	};
+	ethernet@70000 {
+		phy = <&phy0>;
+		phy-mode = "rgmii-id";
+	};
+
+References
+
+  Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
+  http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf
+
+  Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
+  http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf
+
+Notes:
+
+  Note that a previous version of the Micrel ksz9021rl/rn Data Sheet
+  was missing extended register 106 (transmit data pad skews), and
+  incorrectly specified the ps per step as 200ps/step instead of
+  120ps/step. The latest update to this document reflects the latest
+  revision of the Micrel specification even though usage in the kernel
+  still reflects that incorrect document.
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
new file mode 100644
index 0000000000..a407dd1b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -0,0 +1,57 @@
+Micrel PHY properties.
+
+These properties cover the base properties Micrel PHYs.
+
+Optional properties:
+
+ - micrel,led-mode : LED mode value to set for PHYs with configurable LEDs.
+
+	Configure the LED mode with single value. The list of PHYs and the
+	bits that are currently supported:
+
+	KSZ8001: register 0x1e, bits 15..14
+	KSZ8041: register 0x1e, bits 15..14
+	KSZ8021: register 0x1f, bits 5..4
+	KSZ8031: register 0x1f, bits 5..4
+	KSZ8051: register 0x1f, bits 5..4
+	KSZ8081: register 0x1f, bits 5..4
+	KSZ8091: register 0x1f, bits 5..4
+	LAN8814: register EP5.0, bit 6
+
+	See the respective PHY datasheet for the mode values.
+
+ - micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select
+						bit selects 25 MHz mode
+
+	Setting the RMII Reference Clock Select bit enables 25 MHz rather
+	than 50 MHz clock mode.
+
+	Note that this option in only needed for certain PHY revisions with a
+	non-standard, inverted function of this configuration bit.
+	Specifically, a clock reference ("rmii-ref" below) is always needed to
+	actually select a mode.
+
+ - clocks, clock-names: contains clocks according to the common clock bindings.
+
+	supported clocks:
+	- KSZ8021, KSZ8031, KSZ8081, KSZ8091: "rmii-ref": The RMII reference
+	  input clock. Used to determine the XI input clock.
+
+ - micrel,fiber-mode: If present the PHY is configured to operate in fiber mode
+
+	Some PHYs, such as the KSZ8041FTL variant, support fiber mode, enabled
+	by the FXEN boot strapping pin. It can't be determined from the PHY
+	registers whether the PHY is in fiber mode, so this boolean device tree
+	property can be used to describe it.
+
+	In fiber mode, auto-negotiation is disabled and the PHY can only work in
+	100base-fx (full and half duplex) modes.
+
+ - coma-mode-gpios: If present the given gpio will be deasserted when the
+		    PHY is probed.
+
+	Some PHYs have a COMA mode input pin which puts the PHY into
+	isolate and power-down mode. On some boards this input is connected
+	to a GPIO of the SoC.
+
+	Supported on the LAN8814.
diff --git a/Documentation/devicetree/bindings/net/microchip,enc28j60.txt b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
new file mode 100644
index 0000000000..a8275921a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,enc28j60.txt
@@ -0,0 +1,56 @@
+* Microchip ENC28J60
+
+This is a standalone 10 MBit ethernet controller with SPI interface.
+
+For each device connected to a SPI bus, define a child node within
+the SPI master node.
+
+Required properties:
+- compatible: Should be "microchip,enc28j60"
+- reg: Specify the SPI chip select the ENC28J60 is wired to
+- interrupts: Specify the interrupt index within the interrupt controller (referred
+              to above in interrupt-parent) and interrupt type. The ENC28J60 natively
+              generates falling edge interrupts, however, additional board logic
+              might invert the signal.
+- pinctrl-names: List of assigned state names, see pinctrl binding documentation.
+- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line,
+             see also generic and your platform specific pinctrl binding
+             documentation.
+
+Optional properties:
+- spi-max-frequency: Maximum frequency of the SPI bus when accessing the ENC28J60.
+  According to the ENC28J80 datasheet, the chip allows a maximum of 20 MHz, however,
+  board designs may need to limit this value.
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Example (for NXP i.MX28 with pin control stuff for GPIO irq):
+
+        ssp2: ssp@80014000 {
+                compatible = "fsl,imx28-spi";
+                pinctrl-names = "default";
+                pinctrl-0 = <&spi2_pins_b &spi2_sck_cfg>;
+
+                enc28j60: ethernet@0 {
+                        compatible = "microchip,enc28j60";
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&enc28j60_pins>;
+                        reg = <0>;
+                        interrupt-parent = <&gpio3>;
+                        interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+                        spi-max-frequency = <12000000>;
+                };
+        };
+
+        pinctrl@80018000 {
+                enc28j60_pins: enc28j60_pins@0 {
+                        reg = <0>;
+                        fsl,pinmux-ids = <
+                                MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+                        >;
+                        fsl,drive-strength = <MXS_DRIVE_4mA>;
+                        fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                        fsl,pull-up = <MXS_PULL_DISABLE>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
new file mode 100644
index 0000000000..11a679530a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
@@ -0,0 +1,53 @@
+Microchip LAN78xx Gigabit Ethernet controller
+
+The LAN78XX devices are usually configured by programming their OTP or with
+an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
+The Device Tree properties, if present, override the OTP and EEPROM.
+
+Required properties:
+- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Optional properties of the embedded PHY:
+- microchip,led-modes: a 0..4 element vector, with each element configuring
+  the operating mode of an LED. Omitted LEDs are turned off. Allowed values
+  are defined in "include/dt-bindings/net/microchip-lan78xx.h".
+
+Example:
+
+/* Based on the configuration for a Raspberry Pi 3 B+ */
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+				local-mac-address = [ 00 11 22 33 44 55 ];
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
new file mode 100644
index 0000000000..77c9bbf987
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SMSC9500/LAN9530/LAN9730 USB Ethernet Controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired SMSC95xx compatible USB Ethernet
+  controller.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usb424,9500   # SMSC9500 USB Ethernet Device
+          - usb424,9505   # SMSC9505 USB Ethernet Device
+          - usb424,9530   # SMSC LAN9530 USB Ethernet Device
+          - usb424,9730   # SMSC LAN9730 USB Ethernet Device
+          - usb424,9900   # SMSC9500 USB Ethernet Device (SAL10)
+          - usb424,9901   # SMSC9505 USB Ethernet Device (SAL10)
+          - usb424,9902   # SMSC9500A USB Ethernet Device (SAL10)
+          - usb424,9903   # SMSC9505A USB Ethernet Device (SAL10)
+          - usb424,9904   # SMSC9512/9514 USB Hub & Ethernet Device (SAL10)
+          - usb424,9905   # SMSC9500A USB Ethernet Device (HAL)
+          - usb424,9906   # SMSC9505A USB Ethernet Device (HAL)
+          - usb424,9907   # SMSC9500 USB Ethernet Device (Alternate ID)
+          - usb424,9908   # SMSC9500A USB Ethernet Device (Alternate ID)
+          - usb424,9909   # SMSC9512/9514 USB Hub & Ethernet Device  ID)
+          - usb424,9e00   # SMSC9500A USB Ethernet Device
+          - usb424,9e01   # SMSC9505A USB Ethernet Device
+          - usb424,9e08   # SMSC LAN89530 USB Ethernet Device
+          - usb424,ec00   # SMSC9512/9514 USB Hub & Ethernet Device
+
+  reg:
+    maxItems: 1
+
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9e00";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
new file mode 100644
index 0000000000..306ef9ecf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Ethernet switch controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
+  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
+  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
+  2 Quad-SGMII/Quad-USGMII interfaces.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+      - description: analyzer interrupt
+      - description: ptp interrupt
+      - description: ptp external interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+      - const: ana
+      - const: ptp
+      - const: ptp-ext
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+
+  reset-names:
+    items:
+      - const: switch
+
+  ethernet-ports:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+          reg:
+            description:
+              Switch port number
+
+          phys:
+            description:
+              Phandle of a Ethernet SerDes PHY
+
+          phy-mode:
+            description:
+              This specifies the interface used by the Ethernet SerDes towards
+              the PHY or SFP.
+            enum:
+              - gmii
+              - sgmii
+              - qsgmii
+              - 1000base-x
+              - 2500base-x
+
+          phy-handle:
+            description:
+              Phandle of a Ethernet PHY.
+
+          sfp:
+            description:
+              Phandle of an SFP.
+
+          managed: true
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@e0000000 {
+      compatible = "microchip,lan966x-switch";
+      reg =  <0xe0000000 0x0100000>,
+             <0xe2000000 0x0800000>;
+      reg-names = "cpu", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&switch_reset 0>;
+      reset-names = "switch";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phys = <&serdes 0 0>;
+          phy-mode = "gmii";
+        };
+
+        port1: port@1 {
+          reg = <1>;
+          sfp = <&sfp_eth1>;
+          managed = "in-band-status";
+          phys = <&serdes 2 4>;
+          phy-mode = "sgmii";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
new file mode 100644
index 0000000000..fcafef8d5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Ethernet switch controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The SparX-5 Enterprise Ethernet switch family provides a rich set of
+  Enterprise switching features such as advanced TCAM-based VLAN and
+  QoS processing enabling delivery of differentiated services, and
+  security through TCAM-based frame processing using versatile content
+  aware processor (VCAP).
+
+  IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
+  with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
+  IPv6 (S,G) multicast groups.
+
+  L3 security features include source guard and reverse path
+  forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
+  IP tunnels (IP over GRE/IP).
+
+  The SparX-5 switch family targets managed Layer 2 and Layer 3
+  equipment in SMB, SME, and Enterprise where high port count
+  1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: devices target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: devices
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+      - description: ptp interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+      - const: ptp
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+
+  reset-names:
+    items:
+      - const: switch
+
+  mac-address: true
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Switch port number
+
+          phys:
+            maxItems: 1
+            description:
+              phandle of a Ethernet SerDes PHY.  This defines which SerDes
+              instance will handle the Ethernet traffic.
+
+          microchip,bandwidth:
+            description: Specifies bandwidth in Mbit/s allocated to the port.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 25000
+
+          microchip,sd-sgpio:
+            description:
+              Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
+              This is optional, and only needed if the default used index is
+              is not correct.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 383
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+          - microchip,bandwidth
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@600000000 {
+      compatible = "microchip,sparx5-switch";
+      reg =  <0 0x401000>,
+             <0x10004000 0x7fc000>,
+             <0x11010000 0xaf0000>;
+      reg-names = "cpu", "devices", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&reset 0>;
+      reset-names = "switch";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          microchip,bandwidth = <1000>;
+          phys = <&serdes 13>;
+          phy-handle = <&phy0>;
+          phy-mode = "qsgmii";
+        };
+        /* ... */
+        /* Then the 25G interfaces */
+        port60: port@60 {
+          reg = <60>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 29>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth60>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <365>;
+        };
+        port61: port@61 {
+          reg = <61>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 30>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth61>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <369>;
+        };
+        port62: port@62 {
+          reg = <62>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 31>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth62>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <373>;
+        };
+        port63: port@63 {
+          reg = <63>;
+          microchip,bandwidth = <25000>;
+          phys = <&serdes 32>;
+          phy-mode = "10gbase-r";
+          sfp = <&sfp_eth63>;
+          managed = "in-band-status";
+          microchip,sd-sgpio = <377>;
+        };
+        /* Finally the Management interface */
+        port64: port@64 {
+          reg = <64>;
+          microchip,bandwidth = <1000>;
+          phys = <&serdes 0>;
+          phy-handle = <&phy64>;
+          phy-mode = "sgmii";
+          mac-address = [ 00 00 00 01 02 03 ];
+        };
+      };
+    };
+
+...
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
new file mode 100644
index 0000000000..26688e2302
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MotorComm yt8xxx Ethernet PHY
+
+maintainers:
+  - Frank Sae <frank.sae@motor-comm.com>
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id4f51.e91a
+      - ethernet-phy-id4f51.e91b
+
+  rx-internal-delay-ps:
+    description: |
+      RGMII RX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+    enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650,
+            1800, 1900, 1950, 2050, 2100, 2200, 2250, 2350, 2500, 2650, 2800,
+            2950, 3100, 3250, 3400, 3550, 3700, 3850, 4000, 4150 ]
+    default: 1950
+
+  tx-internal-delay-ps:
+    description: |
+      RGMII TX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+    enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800,
+            1950, 2100, 2250 ]
+    default: 1950
+
+  motorcomm,clk-out-frequency-hz:
+    description: clock output on clock output pin.
+    enum: [0, 25000000, 125000000]
+    default: 0
+
+  motorcomm,keep-pll-enabled:
+    description: |
+      If set, keep the PLL enabled even if there is no link. Useful if you
+      want to use the clock output without an ethernet link.
+    type: boolean
+
+  motorcomm,auto-sleep-disabled:
+    description: |
+      If set, PHY will not enter sleep mode and close AFE after unplug cable
+      for a timer.
+    type: boolean
+
+  motorcomm,rx-clk-drv-microamp:
+    description: |
+      drive strength of rx_clk rgmii pad.
+      The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
+      be configured with hardware pull-up resistors to match the SOC voltage
+      (usually 1.8V).
+      The software can read the registers to obtain the LDO voltage and configure
+      the legal drive strength(curren).
+      =====================================================
+      | voltage |        current Available (uA)           |
+      |   1.8v  | 1200 2100 2700 2910 3110 3600 3970 4350 |
+      |   3.3v  | 3070 4080 4370 4680 5020 5450 5740 6140 |
+      =====================================================
+    enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970,
+            4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ]
+    default: 2910
+
+  motorcomm,rx-data-drv-microamp:
+    description: |
+      drive strength of rx_data/rx_ctl rgmii pad.
+      The YT8531 RGMII LDO voltage supports 1.8V/3.3V, and the LDO voltage can
+      be configured with hardware pull-up resistors to match the SOC voltage
+      (usually 1.8V).
+      The software can read the registers to obtain the LDO voltage and configure
+      the legal drive strength(curren).
+      =====================================================
+      | voltage |        current Available (uA)           |
+      |   1.8v  | 1200 2100 2700 2910 3110 3600 3970 4350 |
+      |   3.3v  | 3070 4080 4370 4680 5020 5450 5740 6140 |
+      =====================================================
+    enum: [ 1200, 2100, 2700, 2910, 3070, 3110, 3600, 3970,
+            4080, 4350, 4370, 4680, 5020, 5450, 5740, 6140 ]
+    default: 2910
+
+  motorcomm,tx-clk-adj-enabled:
+    description: |
+      This configuration is mainly to adapt to VF2 with JH7110 SoC.
+      Useful if you want to use tx-clk-xxxx-inverted to adj the delay of tx clk.
+    type: boolean
+
+  motorcomm,tx-clk-10-inverted:
+    description: |
+      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
+      Transmit PHY Clock delay train configuration when speed is 10Mbps.
+    type: boolean
+
+  motorcomm,tx-clk-100-inverted:
+    description: |
+      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
+      Transmit PHY Clock delay train configuration when speed is 100Mbps.
+    type: boolean
+
+  motorcomm,tx-clk-1000-inverted:
+    description: |
+      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
+      Transmit PHY Clock delay train configuration when speed is 1000Mbps.
+    type: boolean
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy-mode = "rgmii-id";
+        ethernet-phy@4 {
+            /*  Only needed to make DT lint tools work. Do not copy/paste
+             *  into real DTS files.
+             */
+            compatible = "ethernet-phy-id4f51.e91a";
+
+            reg = <4>;
+            rx-internal-delay-ps = <2100>;
+            tx-internal-delay-ps = <150>;
+            motorcomm,clk-out-frequency-hz = <0>;
+            motorcomm,keep-pll-enabled;
+            motorcomm,auto-sleep-disabled;
+        };
+    };
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy-mode = "rgmii";
+        ethernet-phy@5 {
+            /*  Only needed to make DT lint tools work. Do not copy/paste
+             *  into real DTS files.
+             */
+            compatible = "ethernet-phy-id4f51.e91a";
+
+            reg = <5>;
+            motorcomm,clk-out-frequency-hz = <125000000>;
+            motorcomm,keep-pll-enabled;
+            motorcomm,auto-sleep-disabled;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml
new file mode 100644
index 0000000000..5b292e7c9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,miim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi MII Management Controller (MIIM)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mscc,ocelot-miim
+      - microchip,lan966x-miim
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: base address
+      - description: associated reset register for internal PHYs
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@107009c {
+      compatible = "mscc,ocelot-miim";
+      reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+      interrupts = <14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
new file mode 100644
index 0000000000..8ee2c7d7ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip VSC7514 Ethernet switch controller
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  Bindings for the Microchip VSC7514 switch driver
+
+  The VSC7514 switch driver handles up to 11 ports and can inject/extract
+  packets using CPU. Additionally, PTP is supported as well as FDMA for faster
+  packet extraction/injection.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: mscc,vsc7514-switch
+    then:
+      $ref: ethernet-switch.yaml#
+      required:
+        - interrupts
+        - interrupt-names
+      properties:
+        reg:
+          minItems: 21
+        reg-names:
+          minItems: 21
+        ethernet-ports:
+          patternProperties:
+            "^port@[0-9a-f]+$":
+              $ref: ethernet-switch-port.yaml#
+              unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          const: mscc,vsc7512-switch
+    then:
+      $ref: /schemas/net/dsa/dsa.yaml#
+      properties:
+        reg:
+          maxItems: 20
+        reg-names:
+          maxItems: 20
+        ethernet-ports:
+          patternProperties:
+            "^port@[0-9a-f]+$":
+              $ref: /schemas/net/dsa/dsa-port.yaml#
+              unevaluatedProperties: false
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7512-switch
+      - mscc,vsc7514-switch
+
+  reg:
+    minItems: 20
+    items:
+      - description: system target
+      - description: rewriter target
+      - description: qs target
+      - description: PTP target
+      - description: Port0 target
+      - description: Port1 target
+      - description: Port2 target
+      - description: Port3 target
+      - description: Port4 target
+      - description: Port5 target
+      - description: Port6 target
+      - description: Port7 target
+      - description: Port8 target
+      - description: Port9 target
+      - description: Port10 target
+      - description: QSystem target
+      - description: Analyzer target
+      - description: S0 target
+      - description: S1 target
+      - description: S2 target
+      - description: fdma target
+
+  reg-names:
+    minItems: 20
+    items:
+      - const: sys
+      - const: rew
+      - const: qs
+      - const: ptp
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+      - const: port8
+      - const: port9
+      - const: port10
+      - const: qsys
+      - const: ana
+      - const: s0
+      - const: s1
+      - const: s2
+      - const: fdma
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PTP ready
+      - description: register based extraction
+      - description: frame dma based extraction
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ptp_rdy
+      - const: xtr
+      - const: fdma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  # VSC7514 (Switchdev)
+  - |
+    switch@1010000 {
+      compatible = "mscc,vsc7514-switch";
+      reg = <0x1010000 0x10000>,
+            <0x1030000 0x10000>,
+            <0x1080000 0x100>,
+            <0x10e0000 0x10000>,
+            <0x11e0000 0x100>,
+            <0x11f0000 0x100>,
+            <0x1200000 0x100>,
+            <0x1210000 0x100>,
+            <0x1220000 0x100>,
+            <0x1230000 0x100>,
+            <0x1240000 0x100>,
+            <0x1250000 0x100>,
+            <0x1260000 0x100>,
+            <0x1270000 0x100>,
+            <0x1280000 0x100>,
+            <0x1800000 0x80000>,
+            <0x1880000 0x10000>,
+            <0x1040000 0x10000>,
+            <0x1050000 0x10000>,
+            <0x1060000 0x10000>,
+            <0x1a0 0x1c4>;
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2", "fdma";
+      interrupts = <18 21 16>;
+      interrupt-names = "ptp_rdy", "xtr", "fdma";
+
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phy-mode = "internal";
+        };
+        port1: port@1 {
+          reg = <1>;
+          phy-handle = <&phy1>;
+          phy-mode = "internal";
+        };
+      };
+    };
+  # VSC7512 (DSA)
+  - |
+    ethernet-switch@1{
+      compatible = "mscc,vsc7512-switch";
+      reg = <0x71010000 0x10000>,
+            <0x71030000 0x10000>,
+            <0x71080000 0x100>,
+            <0x710e0000 0x10000>,
+            <0x711e0000 0x100>,
+            <0x711f0000 0x100>,
+            <0x71200000 0x100>,
+            <0x71210000 0x100>,
+            <0x71220000 0x100>,
+            <0x71230000 0x100>,
+            <0x71240000 0x100>,
+            <0x71250000 0x100>,
+            <0x71260000 0x100>,
+            <0x71270000 0x100>,
+            <0x71280000 0x100>,
+            <0x71800000 0x80000>,
+            <0x71880000 0x10000>,
+            <0x71040000 0x10000>,
+            <0x71050000 0x10000>,
+            <0x71060000 0x10000>;
+            reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2";
+
+            ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+           port@0 {
+            reg = <0>;
+            ethernet = <&mac_sw>;
+            phy-handle = <&phy0>;
+            phy-mode = "internal";
+          };
+          port@1 {
+            reg = <1>;
+            phy-handle = <&phy1>;
+            phy-mode = "internal";
+          };
+        };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
new file mode 100644
index 0000000000..0a3647fe33
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
@@ -0,0 +1,73 @@
+* Microsemi - vsc8531 Giga bit ethernet phy
+
+Optional properties:
+- vsc8531,vddmac	: The vddmac in mV. Allowed values is listed
+			  in the first row of Table 1 (below).
+			  This property is only used in combination
+			  with the 'edge-slowdown' property.
+			  Default value is 3300.
+- vsc8531,edge-slowdown	: % the edge should be slowed down relative to
+			  the fastest possible edge time.
+			  Edge rate sets the drive strength of the MAC
+			  interface output signals.  Changing the
+			  drive strength will affect the edge rate of
+			  the output signal.  The goal of this setting
+			  is to help reduce electrical emission (EMI)
+			  by being able to reprogram drive strength
+			  and in effect slow down the edge rate if
+			  desired.
+			  To adjust the edge-slowdown, the 'vddmac'
+			  must be specified. Table 1 lists the
+			  supported edge-slowdown values for a given
+			  'vddmac'.
+			  Default value is 0%.
+			  Ref: Table:1 - Edge rate change (below).
+- vsc8531,led-[N]-mode	: LED mode. Specify how the LED[N] should behave.
+			  N depends on the number of LEDs supported by a
+			  PHY.
+			  Allowed values are defined in
+			  "include/dt-bindings/net/mscc-phy-vsc8531.h".
+			  Default values are VSC8531_LINK_1000_ACTIVITY (1),
+			  VSC8531_LINK_100_ACTIVITY (2),
+			  VSC8531_LINK_ACTIVITY (0) and
+			  VSC8531_DUPLEX_COLLISION (8).
+- load-save-gpios	: GPIO used for the load/save operation of the PTP
+			  hardware clock (PHC).
+
+
+Table: 1 - Edge rate change
+----------------------------------------------------------------|
+| 		Edge Rate Change (VDDMAC)			|
+|								|
+| 3300 mV	2500 mV		1800 mV		1500 mV		|
+|---------------------------------------------------------------|
+| 0%		0%		0%		0%		|
+| (Fastest)			(recommended)	(recommended)	|
+|---------------------------------------------------------------|
+| 2%		3%		5%		6%		|
+|---------------------------------------------------------------|
+| 4%		6%		9%		14%		|
+|---------------------------------------------------------------|
+| 7%		10%		16%		21%		|
+|(recommended)	(recommended)					|
+|---------------------------------------------------------------|
+| 10%		14%		23%		29%		|
+|---------------------------------------------------------------|
+| 17%		23%		35%		42%		|
+|---------------------------------------------------------------|
+| 29%		37%		52%		58%		|
+|---------------------------------------------------------------|
+| 53%		63%		76%		77%		|
+| (slowest)							|
+|---------------------------------------------------------------|
+
+Example:
+
+        vsc8531_0: ethernet-phy@0 {
+                compatible = "ethernet-phy-id0007.0570";
+                vsc8531,vddmac		= <3300>;
+                vsc8531,edge-slowdown	= <7>;
+                vsc8531,led-0-mode	= <VSC8531_LINK_1000_ACTIVITY>;
+                vsc8531,led-1-mode	= <VSC8531_LINK_100_ACTIVITY>;
+		load-save-gpios		= <&gpio 10 GPIO_ACTIVE_HIGH>;
+        };
diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
new file mode 100644
index 0000000000..89663fdd3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/marvell,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell International Ltd. NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - marvell,nfc-i2c
+      - marvell,nfc-spi
+      - marvell,nfc-uart
+
+  hci-muxed:
+    type: boolean
+    description: |
+      Specifies that the chip is muxing NCI over HCI frames
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-n-io:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description: |
+      Output GPIO pin used to reset the chip (active low)
+
+  i2c-int-falling:
+    type: boolean
+    description: |
+      For I2C type of connection. Specifies that the chip read event shall be
+      triggered on falling edge.
+
+  i2c-int-rising:
+    type: boolean
+    description: |
+      For I2C type of connection.  Specifies that the chip read event shall be
+      triggered on rising edge.
+
+  break-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip needs specific break
+      management.
+
+  flow-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip is using RTS/CTS.
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-i2c
+    then:
+      properties:
+        break-control: false
+        flow-control: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-spi
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
+      properties:
+        break-control: false
+        flow-control: false
+        i2c-int-falling: false
+        i2c-int-rising: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-uart
+    then:
+      properties:
+        i2c-int-falling: false
+        i2c-int-rising: false
+        interrupts: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+        reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "marvell,nfc-i2c";
+            reg = <0x8>;
+
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            i2c-int-rising;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "marvell,nfc-spi";
+            reg = <0>;
+
+            spi-max-frequency = <3000000>;
+            spi-cpha;
+            spi-cpol;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart {
+        nfc {
+            compatible = "marvell,nfc-uart";
+
+            reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>;
+
+            hci-muxed;
+            flow-control;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
new file mode 100644
index 0000000000..6924aff0b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,nxp-nci-i2c
+      - items:
+          - enum:
+              - nxp,nq310
+              - nxp,pn547
+          - const: nxp,nxp-nci-i2c
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - enable-gpios
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@29 {
+            compatible = "nxp,nxp-nci-i2c";
+
+            reg = <0x29>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
new file mode 100644
index 0000000000..07c67c1e98
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn532.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN532 NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,pn532
+      - description: Deprecated bindings
+        enum:
+          - nxp,pn532-i2c
+          - nxp,pn533-i2c
+        deprecated: true
+
+  interrupts:
+    description: Required if connected via I2C
+    maxItems: 1
+
+  reg:
+    description: Required if connected via I2C
+    maxItems: 1
+
+required:
+  - compatible
+
+dependencies:
+  interrupts: [ reg ]
+
+additionalProperties: false
+
+examples:
+  # PN532 on I2C bus
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@24 {
+            compatible = "nxp,pn532";
+
+            reg = <0x24>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+  # PN532 connected via UART
+  - |
+    serial@49042000 {
+        reg = <0x49042000 0x400>;
+
+        nfc {
+            compatible = "nxp,pn532";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 0000000000..18b3a7d819
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN544 NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: nxp,pn544-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the PN544
+    maxItems: 1
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - enable-gpios
+  - firmware-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@28 {
+            compatible = "nxp,pn544-i2c";
+            reg = <0x28>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
new file mode 100644
index 0000000000..12baee4575
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/samsung,s3fwrn5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3FWRN5 NCI NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3fwrn5-i2c
+      - samsung,s3fwrn82
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used for enabling/disabling the chip
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin used to enter firmware mode and sleep/wakeup control
+
+  s3fwrn5,en-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use en-gpios
+
+  s3fwrn5,fw-gpios:
+    maxItems: 1
+    deprecated: true
+    description:
+      Use wake-gpios
+
+additionalProperties: false
+
+required:
+  - compatible
+  - en-gpios
+  - wake-gpios
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3fwrn5-i2c
+    then:
+      required:
+        - interrupts
+        - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        s3fwrn5@27 {
+            compatible = "samsung,s3fwrn5-i2c";
+            reg = <0x27>;
+
+            interrupt-parent = <&gpa1>;
+            interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+            en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&rpmcc 20>;
+        };
+    };
+  # UART example on Raspberry Pi
+  - |
+    uart0 {
+        nfc {
+            compatible = "samsung,s3fwrn82";
+
+            en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
new file mode 100644
index 0000000000..1dcbddbc5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - st,st21nfcb-i2c
+      - st,st21nfcb-spi
+      - st,st21nfcc-i2c
+
+  reset-gpios:
+    description: Output GPIO pin used for resetting the controller
+
+  ese-present:
+    type: boolean
+    description: |
+      Specifies that an ese is physically connected to the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  uicc-present:
+    type: boolean
+    description: |
+      Specifies that the uicc swp signal can be physically connected to the
+      controller
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - reset-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,st21nfcb-i2c
+          - st,st21nfcc-i2c
+then:
+  properties:
+    spi-max-frequency: false
+else:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  required:
+    - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "st,st21nfcb-i2c";
+            reg = <0x08>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "st,st21nfcb-spi";
+            reg = <0>;
+
+            spi-max-frequency = <4000000>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
new file mode 100644
index 0000000000..8a7274357b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st21nfca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SAS ST21NFCA NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: st,st21nfca-i2c
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  ese-present:
+    type: boolean
+    description: |
+      Specifies that an ese is physically connected to the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  uicc-present:
+    type: boolean
+    description: |
+      Specifies that the uicc swp signal can be physically connected to the
+      controller
+
+required:
+  - compatible
+  - enable-gpios
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@1 {
+            compatible = "st,st21nfca-i2c";
+            reg = <0x1>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
new file mode 100644
index 0000000000..647569051e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st95hf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST95HF NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: st,st95hf
+
+  enable-gpio:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  st95hfvin-supply:
+    description: ST95HF transceiver's Vin regulator supply
+
+required:
+  - compatible
+  - enable-gpio
+  - interrupts
+  - reg
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0{
+            compatible = "st,st95hf";
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            enable-gpio = <&pio4 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&pio0>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
new file mode 100644
index 0000000000..9cc236ec42
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Mark Greer <mgreer@animalcreek.com>
+
+properties:
+  compatible:
+    const: ti,trf7970a
+
+  autosuspend-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify autosuspend delay in milliseconds.
+
+  clock-frequency:
+    description: |
+      Set to specify that the input frequency to the trf7970a is 13560000Hz or
+      27120000Hz
+
+  en2-rf-quirk:
+    type: boolean
+    description: |
+      Specify that the trf7970a being used has the "EN2 RF" erratum
+
+  interrupts:
+    maxItems: 1
+
+  irq-status-read-quirk:
+    type: boolean
+    description: |
+      Specify that the trf7970a being used has the "IRQ Status Read" erratum
+
+  reg:
+    maxItems: 1
+
+  ti,enable-gpios:
+    minItems: 1
+    maxItems: 2
+    description: |
+      One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2
+      is optional.
+
+  vdd-io-supply:
+    description: |
+      Regulator specifying voltage for VDD-IO
+
+  vin-supply:
+    description: |
+      Regulator for supply voltage to VIN pin
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - spi-max-frequency
+  - ti,enable-gpios
+  - vin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "ti,trf7970a";
+            reg = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&trf7970a_default>;
+            spi-max-frequency = <2000000>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <14 0>;
+
+            ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+                              <&gpio2 5 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&ldo3_reg>;
+            vdd-io-supply = <&ldo2_reg>;
+            autosuspend-delay = <30000>;
+            irq-status-read-quirk;
+            en2-rf-quirk;
+            clock-frequency = <27120000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
new file mode 100644
index 0000000000..85d7240a9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nixge.txt
@@ -0,0 +1,92 @@
+* NI XGE Ethernet controller
+
+Required properties:
+- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
+              older device trees with DMA engines co-located in the address map,
+              with the one reg entry to describe the whole device.
+- reg: Address and length of the register set for the device. It contains the
+       information of registers in the same order as described by reg-names.
+- reg-names: Should contain the reg names
+	"dma":  DMA engine control and status region
+        "ctrl": MDIO and PHY control and status region
+- interrupts: Should contain tx and rx interrupt
+- interrupt-names: Should be "rx" and "tx"
+- phy-mode: See ethernet.txt file in the same directory.
+- nvmem-cells: Phandle of nvmem cell containing the MAC address
+- nvmem-cell-names: Should be "address"
+
+Optional properties:
+- mdio subnode to indicate presence of MDIO controller
+- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
+  Use instead of phy-handle.
+- phy-handle: See ethernet.txt file in the same directory.
+
+Examples (10G generic PHY):
+	nixge0: ethernet@40000000 {
+		compatible = "ni,xge-enet-3.00";
+		reg = <0x40000000 0x4000
+		       0x41002000 0x2000>;
+		reg-names = "dma", "ctrl";
+
+		nvmem-cells = <&eth1_addr>;
+		nvmem-cell-names = "address";
+
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rx", "tx";
+		interrupt-parent = <&intc>;
+
+		phy-mode = "xgmii";
+		phy-handle = <&ethernet_phy1>;
+
+		mdio {
+			ethernet_phy1: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <4>;
+			};
+		};
+	};
+
+Examples (10G generic PHY, no MDIO):
+	nixge0: ethernet@40000000 {
+		compatible = "ni,xge-enet-2.00";
+		reg = <0x40000000 0x6000>;
+
+		nvmem-cells = <&eth1_addr>;
+		nvmem-cell-names = "address";
+
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rx", "tx";
+		interrupt-parent = <&intc>;
+
+		phy-mode = "xgmii";
+		phy-handle = <&ethernet_phy1>;
+	};
+
+Examples (1G generic fixed-link + MDIO):
+	nixge0: ethernet@40000000 {
+		compatible = "ni,xge-enet-2.00";
+		reg = <0x40000000 0x6000>;
+
+		nvmem-cells = <&eth1_addr>;
+		nvmem-cell-names = "address";
+
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "rx", "tx";
+		interrupt-parent = <&intc>;
+
+		phy-mode = "xgmii";
+
+		fixed-link {
+			speed = <1000>;
+			pause;
+			link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>;
+		};
+
+		mdio {
+			ethernet_phy1: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <4>;
+			};
+		};
+
+	};
diff --git a/Documentation/devicetree/bindings/net/nokia-bluetooth.txt b/Documentation/devicetree/bindings/net/nokia-bluetooth.txt
new file mode 100644
index 0000000000..42be7dc9a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nokia-bluetooth.txt
@@ -0,0 +1,51 @@
+Nokia Bluetooth Chips
+---------------------
+
+Nokia phones often come with UART connected bluetooth chips from different
+vendors and modified device API. Those devices speak a protocol named H4+
+(also known as h4p) by Nokia, which is similar to the H4 protocol from the
+Bluetooth standard. In addition to the H4 protocol it specifies two more
+UART status lines for wakeup of UART transceivers to improve power management
+and a few new packet types used to negotiate uart speed.
+
+Required properties:
+
+ - compatible: should contain "nokia,h4p-bluetooth" as well as one of the following:
+   * "brcm,bcm2048-nokia"
+   * "ti,wl1271-bluetooth-nokia"
+ - reset-gpios: GPIO specifier, used to reset the BT module (active low)
+ - bluetooth-wakeup-gpios: GPIO specifier, used to wakeup the BT module (active high)
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor (active high)
+ - clock-names: should be "sysclk"
+ - clocks: should contain a clock specifier for every name in clock-names
+
+Optional properties:
+
+ - None
+
+Example:
+
+/ {
+       /* controlled (enabled/disabled) directly by BT module */
+       bluetooth_clk: vctcxo {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <38400000>;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+
+       bluetooth {
+               compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+               reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* gpio26 */
+               host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+               bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio37 */
+
+               clocks = <&bluetooth_clk>;
+               clock-names = "sysclk";
+       };
+};
diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
new file mode 100644
index 0000000000..2bd3efff24
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra234 MGBE Multi-Gigabit Ethernet Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-mgbe
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: hypervisor
+      - const: mac
+      - const: xpcs
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: common
+      - const: macsec-ns
+      - const: macsec
+
+  clocks:
+    maxItems: 12
+
+  clock-names:
+    items:
+      - const: mgbe
+      - const: mac
+      - const: mac-divider
+      - const: ptp-ref
+      - const: rx-input-m
+      - const: rx-input
+      - const: tx
+      - const: eee-pcs
+      - const: rx-pcs-input
+      - const: rx-pcs-m
+      - const: rx-pcs
+      - const: tx-pcs
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: mac
+      - const: pcs
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  phy-handle: true
+
+  phy-mode:
+    contains:
+      enum:
+        - usxgmii
+        - 10gbase-kr
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Optional node for embedded MDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - phy-handle
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    ethernet@6800000 {
+        compatible = "nvidia,tegra234-mgbe";
+        reg = <0x06800000 0x10000>,
+              <0x06810000 0x10000>,
+              <0x068a0000 0x10000>;
+        reg-names = "hypervisor", "mac", "xpcs";
+        interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "common";
+        clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+                 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+                 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+                      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+                      "rx-pcs", "tx-pcs";
+        resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+                 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+        reset-names = "mac", "pcs";
+        interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+                        <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+        power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+
+        phy-handle = <&mgbe0_phy>;
+        phy-mode = "usxgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mgbe0_phy: phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0x0>;
+
+                #phy-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
new file mode 100644
index 0000000000..4c01cae7c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8/9 DWMAC glue layer
+
+maintainers:
+  - Clark Wang <xiaoning.wang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+          - nxp,imx93-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+              - nxp,imx93-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the GPR syscon
+          - description: the offset of the GPR register
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@30bf0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt b/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt
new file mode 100644
index 0000000000..7edba1264f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt
@@ -0,0 +1,20 @@
+* NXP LPC1850 GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible:  Should contain "nxp,lpc1850-dwmac"
+
+Examples:
+
+mac: ethernet@40010000 {
+	compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+	reg = <0x40010000 0x2000>;
+	interrupts = <5>;
+	interrupt-names = "macirq";
+	clocks = <&ccu1 CLK_CPU_ETHERNET>;
+	clock-names = "stmmaceth";
+	resets = <&rgu 22>;
+	reset-names = "stmmaceth";
+}
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
new file mode 100644
index 0000000000..ab8867e693
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TJA11xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for NXP TJA11xx automotive PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]+$":
+    type: object
+    description: |
+      Some packages have multiple PHYs. Secondary PHY should be defines as
+      subnode of the first (parent) PHY.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 31
+        description:
+          The ID number for the child PHY. Should be +1 of parent PHY.
+
+      nxp,rmii-refclk-in:
+        type: boolean
+        description: |
+          The REF_CLK is provided for both transmitted and received data
+          in RMII mode. This clock signal is provided by the PHY and is
+          typically derived from an external 25MHz crystal. Alternatively,
+          a 50MHz clock signal generated by an external oscillator can be
+          connected to pin REF_CLK. A third option is to connect a 25MHz
+          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+          as input or output according to the actual circuit connection.
+          If present, indicates that the REF_CLK will be configured as
+          interface reference clock input when RMII mode enabled.
+          If not present, the REF_CLK will be configured as interface
+          reference clock output when RMII mode enabled.
+          Only supported on TJA1100 and TJA1101.
+
+    required:
+      - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1101_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+            nxp,rmii-refclk-in;
+        };
+    };
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tja1102_phy0: ethernet-phy@4 {
+            reg = <0x4>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            tja1102_phy1: ethernet-phy@5 {
+                reg = <0x5>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/opencores-ethoc.txt b/Documentation/devicetree/bindings/net/opencores-ethoc.txt
new file mode 100644
index 0000000000..2dc127c30d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/opencores-ethoc.txt
@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+  first region is for the device registers and descriptor rings,
+  second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+	enet0: ethoc@fd030000 {
+		compatible = "opencores,ethoc";
+		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+		interrupts = <1>;
+		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
+        };
diff --git a/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
new file mode 100644
index 0000000000..fbedf696c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/fsl,lynx-pcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Lynx PCS
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+description: |
+  NXP Lynx 10G and 28G SerDes have Ethernet PCS devices which can be used as
+  protocol controllers. They are accessible over the Ethernet interface's MDIO
+  bus.
+
+properties:
+  compatible:
+    const: fsl,lynx-pcs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio-bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qsgmii_pcs1: ethernet-pcs@1 {
+        compatible = "fsl,lynx-pcs";
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
new file mode 100644
index 0000000000..66a95191bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SGMIISYS Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks
+  to the ethernet subsystem to which it is attached.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-sgmiisys
+          - mediatek,mt7629-sgmiisys
+          - mediatek,mt7981-sgmiisys_0
+          - mediatek,mt7981-sgmiisys_1
+          - mediatek,mt7986-sgmiisys_0
+          - mediatek,mt7986-sgmiisys_1
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  mediatek,pnswap:
+    description: Invert polarity of the SGMII data lanes
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      sgmiisys: syscon@1b128000 {
+        compatible = "mediatek,mt7622-sgmiisys", "syscon";
+        reg = <0 0x1b128000 0 0x1000>;
+        #clock-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
new file mode 100644
index 0000000000..2d33bbab71
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  This MII converter is present on the Renesas RZ/N1 SoC family. It is
+  responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-miic
+      - const: renesas,rzn1-miic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MII reference clock
+      - description: RGMII reference clock
+      - description: RMII reference clock
+      - description: AHB clock used for the MII converter register interface
+
+  clock-names:
+    items:
+      - const: mii_ref
+      - const: rgmii_ref
+      - const: rmii_ref
+      - const: hclk
+
+  renesas,miic-switch-portin:
+    description: MII Switch PORTIN configuration. This value should use one of
+      the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^mii-conv@[0-5]$":
+    type: object
+    description: MII converter port
+
+    properties:
+      reg:
+        description: MII Converter port number.
+        enum: [1, 2, 3, 4, 5]
+
+      renesas,miic-input:
+        description: Converter input port configuration. This value should use
+          one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - renesas,miic-input
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 1
+        then:
+          properties:
+            renesas,miic-input:
+              const: 0
+      - if:
+          properties:
+            reg:
+              const: 2
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [1, 11]
+      - if:
+          properties:
+            reg:
+              const: 3
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [7, 10]
+      - if:
+          properties:
+            reg:
+              const: 4
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [4, 6, 9, 13]
+      - if:
+          properties:
+            reg:
+              const: 5
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [3, 5, 8, 12]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/pcs-rzn1-miic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    eth-miic@44030000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+      reg = <0x44030000 0x10000>;
+      clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+              <&sysctrl R9A06G032_CLK_RGMII_REF>,
+              <&sysctrl R9A06G032_CLK_RMII_REF>,
+              <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+      clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+      renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+      power-domains = <&sysctrl>;
+
+      mii_conv1: mii-conv@1 {
+        renesas,miic-input = <MIIC_GMAC1_PORT>;
+        reg = <1>;
+      };
+
+      mii_conv2: mii-conv@2 {
+        renesas,miic-input = <MIIC_SWITCH_PORTD>;
+        reg = <2>;
+      };
+
+      mii_conv3: mii-conv@3 {
+        renesas,miic-input = <MIIC_SWITCH_PORTC>;
+        reg = <3>;
+      };
+
+      mii_conv4: mii-conv@4 {
+        renesas,miic-input = <MIIC_SWITCH_PORTB>;
+        reg = <4>;
+      };
+
+      mii_conv5: mii-conv@5 {
+        renesas,miic-input = <MIIC_SWITCH_PORTA>;
+        reg = <5>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
new file mode 100644
index 0000000000..2399ee60ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -0,0 +1 @@
+This file has moved to ethernet-phy.yaml.
diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
new file mode 100644
index 0000000000..94a527e6aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/podl-pse-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator based Power Sourcing Equipment
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: Regulator based PoDL PSE controller. The device must be referenced
+  by the PHY node to control power injection to the Ethernet cable.
+
+allOf:
+  - $ref: pse-controller.yaml#
+
+properties:
+  compatible:
+    const: podl-pse-regulator
+
+  '#pse-cells':
+    const: 0
+
+  pse-supply:
+    description: Power supply for the PSE controller
+
+additionalProperties: false
+
+required:
+  - compatible
+  - pse-supply
+
+examples:
+  - |
+    ethernet-pse {
+      compatible = "podl-pse-regulator";
+      pse-supply = <&reg_t1l1>;
+      #pse-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
new file mode 100644
index 0000000000..2d382faca0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Sourcing Equipment (PSE).
+
+description: Binding for the Power Sourcing Equipment (PSE) as defined in the
+  IEEE 802.3 specification. It is designed for hardware which is delivering
+  power over twisted pair/ethernet cable. The ethernet-pse nodes should be
+  used to describe PSE controller and referenced by the ethernet-phy node.
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#pse-cells":
+    description:
+      Used to uniquely identify a PSE instance within an IC. Will be
+      0 on PSE nodes with only a single output and at least 1 on nodes
+      controlling several outputs.
+    enum: [0, 1]
+
+required:
+  - "#pse-cells"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
new file mode 100644
index 0000000000..89f94b31b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,ar71xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCA AR71XX MAC
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qca,ar7100-eth   # Atheros AR7100
+              - qca,ar7240-eth   # Atheros AR7240
+              - qca,ar7241-eth   # Atheros AR7241
+              - qca,ar7242-eth   # Atheros AR7242
+              - qca,ar9130-eth   # Atheros AR9130
+              - qca,ar9330-eth   # Atheros AR9330
+              - qca,ar9340-eth   # Atheros AR9340
+              - qca,qca9530-eth  # Qualcomm Atheros QCA9530
+              - qca,qca9550-eth  # Qualcomm Atheros QCA9550
+              - qca,qca9560-eth  # Qualcomm Atheros QCA9560
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MAC main clock
+      - description: MDIO clock
+
+  clock-names:
+    items:
+      - const: eth
+      - const: mdio
+
+  resets:
+    items:
+      - description: MAC reset
+      - description: MDIO reset
+
+  reset-names:
+    items:
+      - const: mac
+      - const: mdio
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  # Lager board
+  - |
+    eth0: ethernet@19000000 {
+        compatible = "qca,ar9330-eth";
+        reg = <0x19000000 0x200>;
+        interrupts = <4>;
+        resets = <&rst 9>, <&rst 22>;
+        reset-names = "mac", "mdio";
+        clocks = <&pll 1>, <&pll 2>;
+        clock-names = "eth", "mdio";
+        phy-mode = "mii";
+        phy-handle = <&phy_port4>;
+    };
+
+    eth1: ethernet@1a000000 {
+        compatible = "qca,ar9330-eth";
+        reg = <0x1a000000 0x200>;
+        interrupts = <5>;
+        resets = <&rst 13>, <&rst 23>;
+        reset-names = "mac", "mdio";
+        clocks = <&pll 1>, <&pll 2>;
+        clock-names = "eth", "mdio";
+
+        phy-mode = "gmii";
+
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch10: switch@10 {
+                compatible = "qca,ar9331-switch";
+                reg = <0x10>;
+                resets = <&rst 8>;
+                reset-names = "switch";
+
+                interrupt-parent = <&miscintc>;
+                interrupts = <12>;
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    switch_port0: port@0 {
+                        reg = <0x0>;
+                        ethernet = <&eth1>;
+
+                        phy-mode = "gmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                        };
+                    };
+
+                    switch_port1: port@1 {
+                        reg = <0x1>;
+                        phy-handle = <&phy_port0>;
+                        phy-mode = "internal";
+                    };
+
+                    switch_port2: port@2 {
+                        reg = <0x2>;
+                        phy-handle = <&phy_port1>;
+                        phy-mode = "internal";
+                    };
+
+                    switch_port3: port@3 {
+                        reg = <0x3>;
+                        phy-handle = <&phy_port2>;
+                        phy-mode = "internal";
+                    };
+
+                    switch_port4: port@4 {
+                        reg = <0x4>;
+                        phy-handle = <&phy_port3>;
+                        phy-mode = "internal";
+                    };
+                };
+
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    interrupt-parent = <&switch10>;
+
+                    phy_port0: ethernet-phy@0 {
+                        reg = <0x0>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port1: ethernet-phy@1 {
+                        reg = <0x1>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port2: ethernet-phy@2 {
+                        reg = <0x2>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port3: ethernet-phy@3 {
+                        reg = <0x3>;
+                        interrupts = <0>;
+                    };
+
+                    phy_port4: ethernet-phy@4 {
+                        reg = <0x4>;
+                        interrupts = <0>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
new file mode 100644
index 0000000000..3acd09f0da
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,ar803x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR803x PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+  Bindings for Qualcomm Atheros AR803x PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  qca,clk-out-frequency:
+    description: Clock output frequency in Hertz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [25000000, 50000000, 62500000, 125000000]
+
+  qca,clk-out-strength:
+    description: Clock output driver strength.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  qca,disable-smarteee:
+    description: Disable Atheros SmartEEE feature.
+    type: boolean
+
+  qca,keep-pll-enabled:
+    description: |
+      If set, keep the PLL enabled even if there is no link. Useful if you
+      want to use the clock output without an ethernet link.
+
+      Only supported on the AR8031.
+    type: boolean
+
+  qca,disable-hibernation-mode:
+    description: |
+      Disable Atheros AR803X PHYs hibernation mode. If present, indicates
+      that the hardware of PHY will not enter power saving mode when the
+      cable is disconnected. And the RX_CLK always keeps outputting a
+      valid clock.
+    type: boolean
+
+  qca,smarteee-tw-us-100m:
+    description: EEE Tw parameter for 100M links.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 255
+
+  qca,smarteee-tw-us-1g:
+    description: EEE Tw parameter for gigabit links.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 255
+
+  vddio-supply:
+    description: |
+      RGMII I/O voltage regulator (see regulator/regulator.yaml).
+
+      The PHY supports RGMII I/O voltages of 1.5V, 1.8V and 2.5V. You can
+      either connect this to the vddio-regulator (1.5V / 1.8V) or the
+      vddh-regulator (2.5V).
+
+      Only supported on the AR8031.
+
+  vddio-regulator:
+    type: object
+    description:
+      Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
+    $ref: /schemas/regulator/regulator.yaml
+    unevaluatedProperties: false
+
+  vddh-regulator:
+    type: object
+    description:
+      Dummy subnode to model the external connection of the PHY VDDH
+      regulator to VDDIO.
+    $ref: /schemas/regulator/regulator.yaml
+    unevaluatedProperties: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/qca-ar803x.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy-mode = "rgmii-id";
+
+        ethernet-phy@0 {
+            reg = <0>;
+
+            qca,clk-out-frequency = <125000000>;
+            qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+
+            vddio-supply = <&vddio>;
+
+            vddio: vddio-regulator {
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/net/qca-ar803x.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy-mode = "rgmii-id";
+
+        ethernet-phy@0 {
+            reg = <0>;
+
+            qca,clk-out-frequency = <50000000>;
+            qca,keep-pll-enabled;
+
+            vddio-supply = <&vddh>;
+
+            vddh: vddh-regulator {
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt
new file mode 100644
index 0000000000..8f5ae0b84e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt
@@ -0,0 +1,87 @@
+* Qualcomm QCA7000
+
+The QCA7000 is a serial-to-powerline bridge with a host interface which could
+be configured either as SPI or UART slave. This configuration is done by
+the QCA7000 firmware.
+
+(a) Ethernet over SPI
+
+In order to use the QCA7000 as SPI device it must be defined as a child of a
+SPI master in the device tree.
+
+Required properties:
+- compatible	    : Should be "qca,qca7000"
+- reg		    : Should specify the SPI chip select
+- interrupts	    : The first cell should specify the index of the source
+		      interrupt and the second cell should specify the trigger
+		      type as rising edge
+- spi-cpha	    : Must be set
+- spi-cpol	    : Must be set
+
+Optional properties:
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
+		      Numbers smaller than 1000000 or greater than 16000000
+		      are invalid. Missing the property will set the SPI
+		      frequency to 8000000 Hertz.
+- qca,legacy-mode   : Set the SPI data transfer of the QCA7000 to legacy mode.
+		      In this mode the SPI master must toggle the chip select
+		      between each data word. In burst mode these gaps aren't
+		      necessary, which is faster. This setting depends on how
+		      the QCA7000 is setup via GPIO pin strapping. If the
+		      property is missing the driver defaults to burst mode.
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+SPI Example:
+
+/* Freescale i.MX28 SPI master*/
+ssp2: spi@80014000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+
+	qca7000: ethernet@0 {
+		compatible = "qca,qca7000";
+		reg = <0x0>;
+		interrupt-parent = <&gpio3>;      /* GPIO Bank 3 */
+		interrupts = <25 0x1>;            /* Index: 25, rising edge */
+		spi-cpha;                         /* SPI mode: CPHA=1 */
+		spi-cpol;                         /* SPI mode: CPOL=1 */
+		spi-max-frequency = <8000000>;    /* freq: 8 MHz */
+		local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
+	};
+};
+
+(b) Ethernet over UART
+
+In order to use the QCA7000 as UART slave it must be defined as a child of a
+UART master in the device tree. It is possible to preconfigure the UART
+settings of the QCA7000 firmware, but it's not possible to change them during
+runtime.
+
+Required properties:
+- compatible        : Should be "qca,qca7000"
+
+Optional properties:
+- local-mac-address : see ./ethernet.txt
+- current-speed     : current baud rate of QCA7000 which defaults to 115200
+		      if absent, see also ../serial/serial.yaml
+
+UART Example:
+
+/* Freescale i.MX28 UART */
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+
+	qca7000: ethernet {
+		compatible = "qca,qca7000";
+		local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
+		current-speed = <38400>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml
new file mode 100644
index 0000000000..b30544410d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,bam-dmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BAM Data Multiplexer
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  The BAM Data Multiplexer provides access to the network data channels
+  of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916
+  or MSM8974. It is built using a simple protocol layer on top of a DMA engine
+  (Qualcomm BAM DMA) and bidirectional interrupts to coordinate power control.
+
+  Note that this schema does not directly describe a hardware block but rather
+  a firmware convention that combines several other hardware blocks (such as the
+  DMA engine). As such it is specific to a firmware version, not a particular
+  SoC or hardware version.
+
+properties:
+  compatible:
+    const: qcom,bam-dmux
+
+  interrupts:
+    description:
+      Interrupts used by the modem to signal the AP.
+      Both interrupts must be declared as IRQ_TYPE_EDGE_BOTH.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  interrupt-names:
+    items:
+      - const: pc
+      - const: pc-ack
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the modem.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  qcom,smem-state-names:
+    description: Names for the state bits used by the AP to signal the modem.
+    items:
+      - const: pc
+      - const: pc-ack
+
+  dmas:
+    items:
+      - description: TX DMA channel phandle
+      - description: RX DMA channel phandle
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mpss: remoteproc {
+        bam-dmux {
+            compatible = "qcom,bam-dmux";
+
+            interrupt-parent = <&modem_smsm>;
+            interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "pc", "pc-ack";
+
+            qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+            qcom,smem-state-names = "pc", "pc-ack";
+
+            dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+            dma-names = "tx", "rx";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
new file mode 100644
index 0000000000..7bdb412a01
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ethernet ETHQOS device
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  dwmmac based Qualcomm ethernet devices which support Gigabit
+  ethernet (version v2.3.0 and onwards).
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-ethqos
+      - qcom,sa8775p-ethqos
+      - qcom,sc8280xp-ethqos
+      - qcom,sm8150-ethqos
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stmmaceth
+      - const: rgmii
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined signal for various interrupt events
+      - description: The interrupt that occurs when Rx exits the LPI state
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: macirq
+      - const: eth_lpi
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - enum:
+          - rgmii
+          - phyaux
+
+  iommus:
+    maxItems: 1
+
+  phys: true
+
+  phy-names:
+    const: serdes
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet: ethernet@7a80000 {
+      compatible = "qcom,qcs404-ethqos";
+      reg = <0x07a80000 0x10000>,
+            <0x07a96000 0x100>;
+      reg-names = "stmmaceth", "rgmii";
+      clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+      clocks = <&gcc GCC_ETH_AXI_CLK>,
+               <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+               <&gcc GCC_ETH_PTP_CLK>,
+               <&gcc GCC_ETH_RGMII_CLK>;
+      interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi";
+
+      rx-fifo-depth = <4096>;
+      tx-fifo-depth = <4096>;
+
+      snps,tso;
+      snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+      snps,reset-active-low;
+      snps,reset-delays-us = <0 10000 10000>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&ethernet_defaults>;
+
+      phy-handle = <&phy1>;
+      phy-mode = "rgmii";
+      mdio {
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        compatible = "snps,dwmac-mdio";
+        phy1: phy@4 {
+          compatible = "ethernet-phy-ieee802.3-c22";
+          device_type = "ethernet-phy";
+          reg = <0x4>;
+
+          #phy-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
new file mode 100644
index 0000000000..2d5e4ffb2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IP Accelerator (IPA)
+
+maintainers:
+  - Alex Elder <elder@kernel.org>
+
+description:
+  This binding describes the Qualcomm IPA.  The IPA is capable of offloading
+  certain network processing tasks (e.g. filtering, routing, and NAT) from
+  the main processor.
+
+  The IPA sits between multiple independent "execution environments,"
+  including the Application Processor (AP) and the modem.  The IPA presents
+  a Generic Software Interface (GSI) to each execution environment.
+  The GSI is an integral part of the IPA, but it is logically isolated
+  and has a distinct interrupt and a separately-defined address space.
+
+  See also soc/qcom/qcom,smp2p.txt and interconnect/interconnect.txt.  See
+  iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
+  bindings.
+
+
+  - |
+    --------             ---------
+    |      |             |       |
+    |  AP  +<---.   .----+ Modem |
+    |      +--. |   | .->+       |
+    |      |  | |   | |  |       |
+    --------  | |   | |  ---------
+              v |   v |
+            --+-+---+-+--
+            |    GSI    |
+            |-----------|
+            |           |
+            |    IPA    |
+            |           |
+            -------------
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-ipa
+      - qcom,sc7180-ipa
+      - qcom,sc7280-ipa
+      - qcom,sdm845-ipa
+      - qcom,sdx55-ipa
+      - qcom,sdx65-ipa
+      - qcom,sm6350-ipa
+      - qcom,sm8350-ipa
+
+  reg:
+    items:
+      - description: IPA registers
+      - description: IPA shared memory
+      - description: GSI registers
+
+  reg-names:
+    items:
+      - const: ipa-reg
+      - const: ipa-shared
+      - const: gsi
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: core
+
+  interrupts:
+    items:
+      - description: IPA interrupt (hardware IRQ)
+      - description: GSI interrupt (hardware IRQ)
+      - description: Modem clock query interrupt (smp2p interrupt)
+      - description: Modem setup ready interrupt (smp2p interrupt)
+
+  interrupt-names:
+    items:
+      - const: ipa
+      - const: gsi
+      - const: ipa-clock-query
+      - const: ipa-setup-ready
+
+  interconnects:
+    oneOf:
+      - items:
+          - description: Path leading to system memory
+          - description: Path between the AP and IPA config space
+      - items:
+          - description: Path leading to system memory
+          - description: Path leading to internal memory
+          - description: Path between the AP and IPA config space
+
+  interconnect-names:
+    oneOf:
+      - items:
+          - const: memory
+          - const: config
+      - items:
+          - const: memory
+          - const: imem
+          - const: config
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used in by the AP to signal the modem.
+    items:
+      - description: Whether the "ipa-clock-enabled" state bit is valid
+      - description: Whether the IPA clock is enabled (if valid)
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: ipa-clock-enabled-valid
+      - const: ipa-clock-enabled
+
+  qcom,gsi-loader:
+    enum:
+      - self
+      - modem
+      - skip
+    description:
+      Indicates how GSI firmware should be loaded.  If the AP loads
+      and validates GSI firmware, this property has value "self".
+      If the modem does this, this property has value "modem".
+      Otherwise, "skip" means GSI firmware loading is not required.
+
+  modem-init:
+    deprecated: true
+    type: boolean
+    description:
+      This is the older (deprecated) way of indicating how GSI firmware
+      should be loaded.  If present, the modem loads GSI firmware; if
+      absent, the AP loads GSI firmware.
+
+  memory-region:
+    maxItems: 1
+    description:
+      If present, a phandle for a reserved memory area that holds
+      the firmware passed to Trust Zone for authentication.  Required
+      when the AP (not the modem) performs early initialization.
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      If present, name (or relative path) of the file within the
+      firmware search path containing the firmware image used when
+      initializing IPA hardware.  Optional, and only used when
+      Trust Zone performs early initialization.
+
+required:
+  - compatible
+  - iommus
+  - reg
+  - clocks
+  - interrupts
+  - interconnects
+  - qcom,smem-states
+
+allOf:
+  # If qcom,gsi-loader is present, modem-init must not be present
+  - if:
+      required:
+        - qcom,gsi-loader
+    then:
+      properties:
+        modem-init: false
+
+      # If qcom,gsi-loader is "self", the AP loads GSI firmware, and
+      # memory-region must be specified
+      if:
+        properties:
+          qcom,gsi-loader:
+            contains:
+              const: self
+      then:
+        required:
+          - memory-region
+    else:
+      # If qcom,gsi-loader is not present, we use deprecated behavior.
+      # If modem-init is not present, the AP loads GSI firmware, and
+      # memory-region must be specified.
+      if:
+        not:
+          required:
+            - modem-init
+      then:
+        required:
+          - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,rpmh.h>
+        #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+        smp2p-mpss {
+                compatible = "qcom,smp2p";
+                interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+                mboxes = <&apss_shared 6>;
+                qcom,smem = <94>, <432>;
+                qcom,local-pid = <0>;
+                qcom,remote-pid = <5>;
+
+                ipa_smp2p_out: ipa-ap-to-modem {
+                        qcom,entry-name = "ipa";
+                        #qcom,smem-state-cells = <1>;
+                };
+
+                ipa_smp2p_in: ipa-modem-to-ap {
+                        qcom,entry-name = "ipa";
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
+                };
+        };
+
+        ipa@1e40000 {
+                compatible = "qcom,sc7180-ipa";
+
+                qcom,gsi-loader = "self";
+                memory-region = <&ipa_fw_mem>;
+                firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt";
+
+                iommus = <&apps_smmu 0x440 0x0>,
+                         <&apps_smmu 0x442 0x0>;
+                reg = <0x1e40000 0x7000>,
+                      <0x1e47000 0x2000>,
+                      <0x1e04000 0x2c000>;
+                reg-names = "ipa-reg",
+                            "ipa-shared",
+                            "gsi";
+
+                interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+                                      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+                                      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "ipa",
+                                  "gsi",
+                                  "ipa-clock-query",
+                                  "ipa-setup-ready";
+
+                clocks = <&rpmhcc RPMH_IPA_CLK>;
+                clock-names = "core";
+
+                interconnects =
+                        <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+                        <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+                interconnect-names = "memory",
+                                     "imem",
+                                     "config";
+
+                qcom,qmp = <&aoss_qmp>;
+
+                qcom,smem-states = <&ipa_smp2p_out 0>,
+                                   <&ipa_smp2p_out 1>;
+                qcom,smem-state-names = "ipa-clock-enabled-valid",
+                                        "ipa-clock-enabled";
+        };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
new file mode 100644
index 0000000000..3407e909e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipq4019-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ40xx MDIO Controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,ipq4019-mdio
+          - qcom,ipq5018-mdio
+
+      - items:
+          - enum:
+              - qcom,ipq6018-mdio
+              - qcom,ipq8074-mdio
+          - const: qcom,ipq4019-mdio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      the first Address and length of the register set for the MDIO controller.
+      the second Address and length of the register for ethernet LDO, this second
+      address range is only required by the platform IPQ50xx.
+
+  clocks:
+    items:
+      - description: MDIO clock source frequency fixed to 100MHZ
+
+  clock-names:
+    items:
+      - const: gcc_mdio_ahb_clk
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: mdio.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5018-mdio
+              - qcom,ipq6018-mdio
+              - qcom,ipq8074-mdio
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@90000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "qcom,ipq4019-mdio";
+      reg = <0x90000 0x64>;
+
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+
+      ethphy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+
+      ethphy2: ethernet-phy@2 {
+        reg = <2>;
+      };
+
+      ethphy3: ethernet-phy@3 {
+        reg = <3>;
+      };
+
+      ethphy4: ethernet-phy@4 {
+        reg = <4>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
new file mode 100644
index 0000000000..164704338e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ipq8064-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x MDIO bus controller
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+  The ipq806x soc have a MDIO dedicated controller that is
+  used to communicate with the gmac phy connected.
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq8064-mdio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    mdio0: mdio@37000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        compatible = "qcom,ipq8064-mdio";
+        reg = <0x37000000 0x200000>;
+
+        clocks = <&gcc GMAC_CORE1_CLK>;
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* ... */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt
new file mode 100644
index 0000000000..7ae8aa1486
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom-emac.txt
@@ -0,0 +1,111 @@
+Qualcomm Technologies EMAC Gigabit Ethernet Controller
+
+This network controller consists of two devices: a MAC and an SGMII
+internal PHY.  Each device is represented by a device tree node.  A phandle
+connects the MAC node to its corresponding internal phy node.  Another
+phandle points to the external PHY node.
+
+Required properties:
+
+MAC node:
+- compatible : Should be "qcom,fsm9900-emac".
+- reg : Offset and length of the register regions for the device
+- interrupts : Interrupt number used by this controller
+- mac-address : The 6-byte MAC address. If present, it is the default
+	MAC address.
+- internal-phy : phandle to the internal PHY node
+- phy-handle : phandle to the external PHY node
+
+Internal PHY node:
+- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
+- reg : Offset and length of the register region(s) for the device
+- interrupts : Interrupt number used by this controller
+
+The external phy child node:
+- reg : The phy address
+
+Example:
+
+FSM9900:
+
+soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	emac0: ethernet@feb20000 {
+		compatible = "qcom,fsm9900-emac";
+		reg = <0xfeb20000 0x10000>,
+		      <0xfeb36000 0x1000>;
+		interrupts = <76>;
+
+		clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
+			<&gcc 6>, <&gcc 7>;
+		clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
+			"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
+
+		internal-phy = <&emac_sgmii>;
+
+		phy-handle = <&phy0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdio_pins_a>;
+	};
+
+	emac_sgmii: ethernet@feb38000 {
+		compatible = "qcom,fsm9900-emac-sgmii";
+		reg = <0xfeb38000 0x1000>;
+		interrupts = <80>;
+	};
+
+	tlmm: pinctrl@fd510000 {
+		compatible = "qcom,fsm9900-pinctrl";
+
+		mdio_pins_a: mdio {
+			state {
+				pins = "gpio123", "gpio124";
+				function = "mdio";
+			};
+		};
+	};
+
+
+QDF2432:
+
+soc {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	emac0: ethernet@38800000 {
+		compatible = "qcom,fsm9900-emac";
+		reg = <0x0 0x38800000 0x0 0x10000>,
+		      <0x0 0x38816000 0x0 0x1000>;
+		interrupts = <0 256 4>;
+
+		clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
+			 <&gcc 6>, <&gcc 7>;
+		clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
+			"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
+
+		internal-phy = <&emac_sgmii>;
+
+		phy-handle = <&phy0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+
+	emac_sgmii: ethernet@410400 {
+		compatible = "qcom,qdf2432-emac-sgmii";
+		reg = <0x0 0x00410400 0x0 0xc00>, /* Base address */
+		      <0x0 0x00410000 0x0 0x400>; /* Per-lane digital */
+		interrupts = <0 254 1>;
+	};
diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
new file mode 100644
index 0000000000..bb94a23885
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL82xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description:
+  Bindings for Realtek RTL82xx PHYs
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  realtek,clkout-disable:
+    type: boolean
+    description:
+      Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset.
+
+
+  realtek,aldps-enable:
+    type: boolean
+    description:
+      Enable ALDPS mode, ALDPS mode default is disabled after hardware reset.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethphy1: ethernet-phy@1 {
+                reg = <1>;
+                realtek,clkout-disable;
+                realtek,aldps-enable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
new file mode 100644
index 0000000000..043e118c60
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Alistair Francis <alistair@alistair23.me>
+
+description:
+  RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part
+  is connected over SDIO, while BT is connected over serial. It speaks
+  H5 protocol with few extra commands to upload firmware and change
+  module speed.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - realtek,rtl8723bs-bt
+          - realtek,rtl8723cs-bt
+          - realtek,rtl8723ds-bt
+          - realtek,rtl8822cs-bt
+      - items:
+          - enum:
+              - realtek,rtl8821cs-bt
+          - const: realtek,rtl8723bs-bt
+
+  device-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the BT module
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to enable the BT module
+
+  host-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the host processor
+
+  max-speed: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+        uart-has-rtscts;
+
+        bluetooth {
+            compatible = "realtek,rtl8723bs-bt";
+            device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+            host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
new file mode 100644
index 0000000000..06b38c9bc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,ether.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Electronics SH EtherMAC
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,gether-r8a7740   # device is a part of R8A7740 SoC
+              - renesas,gether-r8a77980  # device is a part of R8A77980 SoC
+              - renesas,ether-r7s72100   # device is a part of R7S72100 SoC
+              - renesas,ether-r7s9210    # device is a part of R7S9210 SoC
+      - items:
+          - enum:
+              - renesas,ether-r8a7778    # device is a part of R8A7778 SoC
+              - renesas,ether-r8a7779    # device is a part of R8A7779 SoC
+          - enum:
+              - renesas,rcar-gen1-ether  # a generic R-Car Gen1 device
+      - items:
+          - enum:
+              - renesas,ether-r8a7742    # device is a part of R8A7742 SoC
+              - renesas,ether-r8a7743    # device is a part of R8A7743 SoC
+              - renesas,ether-r8a7745    # device is a part of R8A7745 SoC
+              - renesas,ether-r8a7790    # device is a part of R8A7790 SoC
+              - renesas,ether-r8a7791    # device is a part of R8A7791 SoC
+              - renesas,ether-r8a7793    # device is a part of R8A7793 SoC
+              - renesas,ether-r8a7794    # device is a part of R8A7794 SoC
+          - enum:
+              - renesas,rcar-gen2-ether  # a generic R-Car Gen2 or RZ/G1 device
+
+  reg:
+    items:
+      - description: E-DMAC/feLic registers
+      - description: TSU registers
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    description: number of address cells for the MDIO bus
+    const: 1
+
+  '#size-cells':
+    description: number of size cells on the MDIO bus
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      specify when a board does not provide a proper Ether LINK signal
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      specify when the Ether LINK signal is active-low instead of normal
+      active-high
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  # Lager board
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet@ee700000 {
+        compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
+        reg = <0xee700000 0x400>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 813>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 813>;
+        phy-mode = "rmii";
+        phy-handle = <&phy1>;
+        renesas,ether-link-active-low;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy1: ethernet-phy@1 {
+            compatible = "ethernet-phy-id0022.1537",
+                         "ethernet-phy-ieee802.3-c22";
+            reg = <1>;
+            interrupt-parent = <&irqc0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            micrel,led-mode = <1>;
+            reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
new file mode 100644
index 0000000000..3f41294f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -0,0 +1,357 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet AVB
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,etheravb-r8a7742      # RZ/G1H
+              - renesas,etheravb-r8a7743      # RZ/G1M
+              - renesas,etheravb-r8a7744      # RZ/G1N
+              - renesas,etheravb-r8a7745      # RZ/G1E
+              - renesas,etheravb-r8a77470     # RZ/G1C
+              - renesas,etheravb-r8a7790      # R-Car H2
+              - renesas,etheravb-r8a7791      # R-Car M2-W
+              - renesas,etheravb-r8a7792      # R-Car V2H
+              - renesas,etheravb-r8a7793      # R-Car M2-N
+              - renesas,etheravb-r8a7794      # R-Car E2
+          - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a774a1     # RZ/G2M
+              - renesas,etheravb-r8a774b1     # RZ/G2N
+              - renesas,etheravb-r8a774c0     # RZ/G2E
+              - renesas,etheravb-r8a774e1     # RZ/G2H
+              - renesas,etheravb-r8a7795      # R-Car H3
+              - renesas,etheravb-r8a7796      # R-Car M3-W
+              - renesas,etheravb-r8a77961     # R-Car M3-W+
+              - renesas,etheravb-r8a77965     # R-Car M3-N
+              - renesas,etheravb-r8a77970     # R-Car V3M
+              - renesas,etheravb-r8a77980     # R-Car V3H
+              - renesas,etheravb-r8a77990     # R-Car E3
+              - renesas,etheravb-r8a77995     # R-Car D3
+          - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a779a0     # R-Car V3U
+              - renesas,etheravb-r8a779g0     # R-Car V4H
+          - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,etheravb-r9a09g011 # RZ/V2M
+          - const: renesas,etheravb-rzv2m  # RZ/V2M compatible
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-gbeth # RZ/G2UL
+              - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
+              - renesas,r9a07g054-gbeth # RZ/V2L
+          - const: renesas,rzg2l-gbeth  # RZ/{G2L,G2UL,V2L} family
+
+  reg: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks: true
+
+  clock-names: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  '#address-cells':
+    description: Number of address cells for the MDIO bus.
+    const: 1
+
+  '#size-cells':
+    description: Number of size cells on the MDIO bus.
+    const: 0
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      Specify when a board does not provide a proper AVB_LINK signal.
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      Specify when the AVB_LINK signal is active-low instead of normal
+      active-high.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+    then:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+            - description: Stream buffer
+    else:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,rzg2l-gbeth
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: mux
+            - const: fil
+            - const: arp_ns
+        rx-internal-delay-ps: false
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          interrupts:
+            minItems: 29
+            maxItems: 29
+          interrupt-names:
+            items:
+              pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$'
+          rx-internal-delay-ps: false
+        required:
+          - interrupt-names
+      else:
+        properties:
+          interrupts:
+            minItems: 25
+            maxItems: 25
+          interrupt-names:
+            items:
+              pattern: '^ch[0-9]+$'
+        required:
+          - interrupt-names
+          - rx-internal-delay-ps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-r8a774a1
+              - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a774e1
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+              - renesas,etheravb-r8a77970
+              - renesas,etheravb-r8a77980
+              - renesas,etheravb-rcar-gen4
+    then:
+      required:
+        - tx-internal-delay-ps
+    else:
+      properties:
+        tx-internal-delay-ps: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77995
+    then:
+      properties:
+        rx-internal-delay-ps:
+          const: 1800
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77980
+    then:
+      properties:
+        tx-internal-delay-ps:
+          const: 2000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2l-gbeth
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Reference clock for RGMII
+        clock-names:
+          items:
+            - const: axi
+            - const: chi
+            - const: refclk
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          clocks:
+            items:
+              - description: Main clock
+              - description: Coherent Hub Interface clock
+              - description: gPTP reference clock
+          clock-names:
+            items:
+              - const: axi
+              - const: chi
+              - const: gptp
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            items:
+              - description: AVB functional clock
+              - description: Optional TXC reference clock
+          clock-names:
+            minItems: 1
+            items:
+              - const: fck
+              - const: refclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    aliases {
+            ethernet0 = &avb;
+    };
+
+    avb: ethernet@e6800000 {
+            compatible = "renesas,etheravb-r8a7795",
+                         "renesas,etheravb-rcar-gen3";
+            reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>;
+            interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6",
+                              "ch7", "ch8", "ch9", "ch10", "ch11", "ch12",
+                              "ch13", "ch14", "ch15", "ch16", "ch17", "ch18",
+                              "ch19", "ch20", "ch21", "ch22", "ch23", "ch24";
+            clocks = <&cpg CPG_MOD 812>;
+            clock-names = "fck";
+            iommus = <&ipmmu_ds0 16>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 812>;
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <2000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy0: ethernet-phy@0 {
+                    compatible = "ethernet-phy-id0022.1622",
+                                 "ethernet-phy-ieee802.3-c22";
+                    rxc-skew-ps = <1500>;
+                    reg = <0>;
+                    interrupt-parent = <&gpio2>;
+                    interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+                    reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml b/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml
new file mode 100644
index 0000000000..e933a1e48d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,r8a779f0-ether-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet Switch
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ether-switch
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: secure_base
+
+  interrupts:
+    maxItems: 47
+
+  interrupt-names:
+    items:
+      - const: mfwd_error
+      - const: race_error
+      - const: coma_error
+      - const: gwca0_error
+      - const: gwca1_error
+      - const: etha0_error
+      - const: etha1_error
+      - const: etha2_error
+      - const: gptp0_status
+      - const: gptp1_status
+      - const: mfwd_status
+      - const: race_status
+      - const: coma_status
+      - const: gwca0_status
+      - const: gwca1_status
+      - const: etha0_status
+      - const: etha1_status
+      - const: etha2_status
+      - const: rmac0_status
+      - const: rmac1_status
+      - const: rmac2_status
+      - const: gwca0_rxtx0
+      - const: gwca0_rxtx1
+      - const: gwca0_rxtx2
+      - const: gwca0_rxtx3
+      - const: gwca0_rxtx4
+      - const: gwca0_rxtx5
+      - const: gwca0_rxtx6
+      - const: gwca0_rxtx7
+      - const: gwca1_rxtx0
+      - const: gwca1_rxtx1
+      - const: gwca1_rxtx2
+      - const: gwca1_rxtx3
+      - const: gwca1_rxtx4
+      - const: gwca1_rxtx5
+      - const: gwca1_rxtx6
+      - const: gwca1_rxtx7
+      - const: gwca0_rxts0
+      - const: gwca0_rxts1
+      - const: gwca1_rxts0
+      - const: gwca1_rxts1
+      - const: rmac0_mdio
+      - const: rmac1_mdio
+      - const: rmac2_mdio
+      - const: rmac0_phy
+      - const: rmac1_phy
+      - const: rmac2_phy
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 16
+
+  power-domains:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        description: Port number of ETHA (TSNA).
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              Port number of ETHA (TSNA).
+
+          phys:
+            maxItems: 1
+            description:
+              Phandle of an Ethernet SERDES.
+
+          mdio:
+            $ref: /schemas/net/mdio.yaml#
+            unevaluatedProperties: false
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - phys
+          - mdio
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - power-domains
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ethernet@e6880000 {
+        compatible = "renesas,r8a779f0-ether-switch";
+        reg = <0xe6880000 0x20000>, <0xe68c0000 0x20000>;
+        reg-names = "base", "secure_base";
+        interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mfwd_error", "race_error",
+                          "coma_error", "gwca0_error",
+                          "gwca1_error", "etha0_error",
+                          "etha1_error", "etha2_error",
+                          "gptp0_status", "gptp1_status",
+                          "mfwd_status", "race_status",
+                          "coma_status", "gwca0_status",
+                          "gwca1_status", "etha0_status",
+                          "etha1_status", "etha2_status",
+                          "rmac0_status", "rmac1_status",
+                          "rmac2_status",
+                          "gwca0_rxtx0", "gwca0_rxtx1",
+                          "gwca0_rxtx2", "gwca0_rxtx3",
+                          "gwca0_rxtx4", "gwca0_rxtx5",
+                          "gwca0_rxtx6", "gwca0_rxtx7",
+                          "gwca1_rxtx0", "gwca1_rxtx1",
+                          "gwca1_rxtx2", "gwca1_rxtx3",
+                          "gwca1_rxtx4", "gwca1_rxtx5",
+                          "gwca1_rxtx6", "gwca1_rxtx7",
+                          "gwca0_rxts0", "gwca0_rxts1",
+                          "gwca1_rxts0", "gwca1_rxts1",
+                          "rmac0_mdio", "rmac1_mdio",
+                          "rmac2_mdio",
+                          "rmac0_phy", "rmac1_phy",
+                          "rmac2_phy";
+        clocks = <&cpg CPG_MOD 1505>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 1505>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 0>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 1>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                phy-handle = <&eth_phy2>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 2>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/rfkill-gpio.yaml b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml
new file mode 100644
index 0000000000..9630c8466f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rfkill-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled rfkill switch
+
+maintainers:
+  - Johannes Berg <johannes@sipsolutions.net>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: rfkill-gpio
+
+  label:
+    description: rfkill switch name, defaults to node name
+
+  radio-type:
+    description: rfkill radio type
+    enum:
+      - bluetooth
+      - fm
+      - gps
+      - nfc
+      - ultrawideband
+      - wimax
+      - wlan
+      - wwan
+
+  shutdown-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - radio-type
+  - shutdown-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    rfkill {
+        compatible = "rfkill-gpio";
+        label = "rfkill-pcie-wlan";
+        radio-type = "wlan";
+        shutdown-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
new file mode 100644
index 0000000000..364028b3bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rockchip,emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-emac
+      - rockchip,rk3066-emac
+      - rockchip,rk3188-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: host clock
+      - description: reference clock
+      - description: mac TX/RX clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hclk
+      - const: macref
+      - const: macclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon GRF used to control speed and mode for the EMAC.
+
+  phy-supply:
+    description:
+      Phandle to a regulator if the PHY needs one.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phy
+  - phy-mode
+  - mdio
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-emac
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          minItems: 3
+
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@10204000 {
+      compatible = "rockchip,rk3188-emac";
+      reg = <0xc0fc2000 0x3c>;
+      interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+      clock-names = "hclk", "macref";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+      pinctrl-names = "default";
+      phy = <&phy0>;
+      phy-mode = "rmii";
+      phy-supply = <&vcc_rmii>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy0: ethernet-phy@0 {
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
new file mode 100644
index 0000000000..70bbc4220e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip 10/100/1000 Ethernet driver(GMAC)
+
+maintainers:
+  - David Wu <david.wu@rock-chips.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,px30-gmac
+          - rockchip,rk3128-gmac
+          - rockchip,rk3228-gmac
+          - rockchip,rk3288-gmac
+          - rockchip,rk3308-gmac
+          - rockchip,rk3328-gmac
+          - rockchip,rk3366-gmac
+          - rockchip,rk3368-gmac
+          - rockchip,rk3399-gmac
+          - rockchip,rk3568-gmac
+          - rockchip,rk3588-gmac
+          - rockchip,rv1108-gmac
+          - rockchip,rv1126-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,px30-gmac
+              - rockchip,rk3128-gmac
+              - rockchip,rk3228-gmac
+              - rockchip,rk3288-gmac
+              - rockchip,rk3308-gmac
+              - rockchip,rk3328-gmac
+              - rockchip,rk3366-gmac
+              - rockchip,rk3368-gmac
+              - rockchip,rk3399-gmac
+              - rockchip,rv1108-gmac
+      - items:
+          - enum:
+              - rockchip,rk3568-gmac
+              - rockchip,rk3588-gmac
+              - rockchip,rv1126-gmac
+          - const: snps,dwmac-4.20a
+
+  clocks:
+    minItems: 5
+    maxItems: 8
+
+  clock-names:
+    contains:
+      enum:
+        - stmmaceth
+        - mac_clk_tx
+        - mac_clk_rx
+        - aclk_mac
+        - pclk_mac
+        - clk_mac_ref
+        - clk_mac_refout
+        - clk_mac_speed
+
+  clock_in_out:
+    description:
+      For RGMII, it must be "input", means main clock(125MHz)
+      is not sourced from SoC's PLL, but input from PHY.
+      For RMII, "input" means PHY provides the reference clock(50MHz),
+      "output" means GMAC provides the reference clock.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [input, output]
+    default: input
+
+  rockchip,grf:
+    description: The phandle of the syscon node for the general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  rockchip,php-grf:
+    description:
+      The phandle of the syscon node for the peripheral general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  tx_delay:
+    description: Delay value for TXD timing.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7F
+    default: 0x30
+
+  rx_delay:
+    description: Delay value for RXD timing.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x7F
+    default: 0x10
+
+  phy-supply:
+    description: PHY regulator
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    gmac: ethernet@ff290000 {
+        compatible = "rockchip,rk3288-gmac";
+        reg = <0xff290000 0x10000>;
+        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq";
+        clocks = <&cru SCLK_MAC>,
+                 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+                 <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+                 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+        clock-names = "stmmaceth",
+                      "mac_clk_rx", "mac_clk_tx",
+                      "clk_mac_ref", "clk_mac_refout",
+                      "aclk_mac", "pclk_mac";
+        assigned-clocks = <&cru SCLK_MAC>;
+        assigned-clock-parents = <&ext_gmac>;
+
+        rockchip,grf = <&grf>;
+        phy-mode = "rgmii";
+        clock_in_out = "input";
+        tx_delay = <0x30>;
+        rx_delay = <0x10>;
+    };
diff --git a/Documentation/devicetree/bindings/net/samsung-sxgbe.txt b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
new file mode 100644
index 0000000000..b9381b761a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/samsung-sxgbe.txt
@@ -0,0 +1,52 @@
+* Samsung 10G Ethernet driver (SXGBE)
+
+Required properties:
+- compatible: Should be "samsung,sxgbe-v2.0a"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the SXGBE interrupts
+  These interrupts are ordered by fixed and follows variable
+  transmit DMA interrupts, receive DMA interrupts and lpi interrupt.
+  index 0 - this is fixed common interrupt of SXGBE and it is always
+  available.
+  index 1 to 25 - 8 variable transmit interrupts, variable 16 receive interrupts
+  and 1 optional lpi interrupt.
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "sgmii", "xgmii".
+- samsung,pbl: Integer, Programmable Burst Length.
+  Supported values are 1, 2, 4, 8, 16, or 32.
+- samsung,burst-map: Integer, Program the possible bursts supported by sxgbe
+  This is an integer and represents allowable DMA bursts when fixed burst.
+  Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled.
+  When fixed length is needed for burst mode, it can be set within allowable
+  range.
+
+Optional properties:
+- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
+		  than the maximum frame size.
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Example:
+
+	aliases {
+		ethernet0 = <&sxgbe0>;
+	};
+
+	sxgbe0: ethernet@1a040000 {
+		compatible = "samsung,sxgbe-v2.0a";
+		reg = <0 0x1a040000 0 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 209 4>, <0 185 4>, <0 186 4>, <0 187 4>,
+			     <0 188 4>, <0 189 4>, <0 190 4>, <0 191 4>,
+			     <0 192 4>, <0 193 4>, <0 194 4>, <0 195 4>,
+			     <0 196 4>, <0 197 4>, <0 198 4>, <0 199 4>,
+			     <0 200 4>, <0 201 4>, <0 202 4>, <0 203 4>,
+			     <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>,
+			     <0 208 4>, <0 210 4>;
+		samsung,pbl = <0x08>
+		samsung,burst-map = <0x20>
+		mac-address = [ 00 11 22 33 44 55 ]; /* Filled in by U-Boot */
+		max-frame-size = <9000>;
+		phy-mode = "xgmii";
+	};
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
new file mode 100644
index 0000000000..973e478a39
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sff,sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
+  Transceiver
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    enum:
+      - sff,sfp  # for SFP modules
+      - sff,sff  # for soldered down SFF modules
+
+  i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of an I2C bus controller for the SFP two wire serial
+
+  maximum-power-milliwatt:
+    minimum: 1000
+    default: 1000
+    description:
+      Maximum module power consumption Specifies the maximum power consumption
+      allowable by a module in the slot, in milli-Watts. Presently, modules can
+      be up to 1W, 1.5W or 2W.
+
+  "mod-def0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
+      presence input gpio signal, active (module absent) high. Must not be
+      present for SFF modules
+
+  "los-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Receiver Loss of Signal Indication
+      input gpio signal, active (signal lost) high
+
+  "tx-fault-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Module Transmitter Fault input gpio
+      signal, active (fault condition) high
+
+  "tx-disable-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Transmitter Disable output gpio
+      signal, active (Tx disable) high
+
+  "rate-select0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
+      output gpio signal, low - low Rx rate, high - high Rx rate Must not be
+      present for SFF modules
+
+  "rate-select1-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
+      output gpio signal (SFP+ only), low - low Tx rate, high - high Tx rate. Must
+      not be present for SFF modules
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sff,sff
+    then:
+      properties:
+        mod-def0-gpios: false
+        rate-select0-gpios: false
+        rate-select1-gpios: false
+
+required:
+  - compatible
+  - i2c-bus
+
+additionalProperties: false
+
+examples:
+  - | # Direct serdes to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+
+    sfp1: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_1g_i2c>;
+      los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+      maximum-power-milliwatt = <1000>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
+      tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
+    };
+
+    ethernet {
+      phy-names = "comphy";
+      phys = <&cps_comphy5 0>;
+      sfp = <&sfp1>;
+    };
+
+  - | # Serdes to PHY to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sfp2: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_i2c>;
+      los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cps_sfpp0_pins>;
+      tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+    };
+
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy: ethernet-phy@0 {
+        compatible = "ethernet-phy-ieee802.3-c45";
+        pinctrl-names = "default";
+        pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
+        reg = <0>;
+        interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+        sfp = <&sfp2>;
+      };
+    };
+
+    ethernet {
+      phy = <&phy>;
+      phy-mode = "10gbase-kr";
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
new file mode 100644
index 0000000000..f86667cbcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan9115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: smsc,lan9115
+      - items:
+          - enum:
+              - smsc,lan89218
+              - smsc,lan9117
+              - smsc,lan9118
+              - smsc,lan9220
+              - smsc,lan9221
+          - const: smsc,lan9115
+
+  reg:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 2, 4 ]
+    default: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description:
+          LAN interrupt line
+      - description:
+          Optional PME (power management event) interrupt that is able to wake
+          up the host system with a 50ms pulse on network activity
+
+  clocks:
+    maxItems: 1
+
+  phy-mode: true
+
+  smsc,irq-active-high:
+    type: boolean
+    description: Indicates the IRQ polarity is active-high
+
+  smsc,irq-push-pull:
+    type: boolean
+    description: Indicates the IRQ type is push-pull
+
+  smsc,force-internal-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use internal PHY
+
+  smsc,force-external-phy:
+    type: boolean
+    description: Forces SMSC LAN controller to use external PHY
+
+  smsc,save-mac-address:
+    type: boolean
+    description:
+      Indicates that MAC address needs to be saved before resetting the
+      controller
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      On many systems this is wired high so the device goes out of reset at
+      power-on, but if it is under program control, this optional GPIO can
+      wake up in response to it.
+
+  vdd33a-supply:
+    description: 3.3V analog power supply
+
+  vddvario-supply:
+    description: IO logic power supply
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*",
+# "gpmc,*", ...) to be found, that actually depend on the compatible value of
+# the parent node.
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet@f4000000 {
+            compatible = "smsc,lan9220", "smsc,lan9115";
+            reg = <0xf4000000 0x2000000>;
+            phy-mode = "mii";
+            interrupt-parent = <&gpio1>;
+            interrupts = <31>, <32>;
+            reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+            reg-io-width = <4>;
+            smsc,irq-push-pull;
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
new file mode 100644
index 0000000000..6df5331626
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: smsc,lan91c111
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 1, 2, 4 ]
+    default: 4
+
+  reset-gpios:
+    description: GPIO connected to control RESET pin
+    maxItems: 1
+
+  power-gpios:
+    description: GPIO connect to control PWRDWN pin
+    maxItems: 1
+
+  pxa-u16-align4:
+    description: put in place the workaround the force all u16 writes to be
+      32 bits aligned
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@4010000 {
+          compatible = "smsc,lan91c111";
+          reg = <0x40100000 0x10000>;
+          phy-mode = "mii";
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+          reg-io-width = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
new file mode 100644
index 0000000000..a8d0dc9a8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -0,0 +1,27 @@
+SMSC LAN87xx Ethernet PHY
+
+Some boards require special tuning values. Configure them
+through an Ethernet OF device node.
+
+Optional properties:
+
+- clocks:
+  The clock used as phy reference clock and is connected to phy
+  pin XTAL1/CLKIN.
+
+- smsc,disable-energy-detect:
+  If set, do not enable energy detect mode for the SMSC phy.
+  default: enable energy detect mode
+
+Examples:
+smsc phy with disabled energy detect mode on an am335x based board.
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
new file mode 100644
index 0000000000..bb0224a3e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
@@ -0,0 +1,168 @@
+* Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC)
+
+This binding is deprecated, but it continues to be supported, but new
+features should be preferably added to the stmmac binding document.
+
+This binding supports the Synopsys Designware Ethernet QoS (Quality Of Service)
+IP block. The IP supports multiple options for bus type, clocking and reset
+structure, and feature list. Consequently, a number of properties and list
+entries in properties are marked as optional, or only required in specific HW
+configurations.
+
+Required properties:
+- compatible: One of:
+  - "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10"
+    Represents the IP core when integrated into the Axis ARTPEC-6 SoC.
+  - "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"
+    Represents the IP core when integrated into the NVIDIA Tegra186 SoC.
+  - "snps,dwc-qos-ethernet-4.10"
+    This combination is deprecated. It should be treated as equivalent to
+    "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10". It is supported to be
+    compatible with earlier revisions of this binding.
+- reg: Address and length of the register set for the device
+- clocks: Phandle and clock specifiers for each entry in clock-names, in the
+  same order. See ../clock/clock-bindings.txt.
+- clock-names: May contain any/all of the following depending on the IP
+  configuration, in any order:
+  - "tx"
+    The EQOS transmit path clock. The HW signal name is clk_tx_i.
+    In some configurations (e.g. GMII/RGMII), this clock also drives the PHY TX
+    path. In other configurations, other clocks (such as tx_125, rmii) may
+    drive the PHY TX path.
+  - "rx"
+    The EQOS receive path clock. The HW signal name is clk_rx_i.
+    In some configurations (e.g. GMII/RGMII), this clock is derived from the
+    PHY's RX clock output. In other configurations, other clocks (such as
+    rx_125, rmii) may drive the EQOS RX path.
+    In cases where the PHY clock is directly fed into the EQOS receive path
+    without intervening logic, the DT need not represent this clock, since it
+    is assumed to be fully under the control of the PHY device/driver. In
+    cases where SoC integration adds additional logic to this path, such as a
+    SW-controlled clock gate, this clock should be represented in DT.
+  - "slave_bus"
+    The CPU/slave-bus (CSR) interface clock. This applies to any bus type;
+    APB, AHB, AXI, etc. The HW signal name is hclk_i (AHB) or clk_csr_i (other
+    buses).
+  - "master_bus"
+    The master bus interface clock. Only required in configurations that use a
+    separate clock for the master and slave bus interfaces. The HW signal name
+    is hclk_i (AHB) or aclk_i (AXI).
+  - "ptp_ref"
+    The PTP reference clock. The HW signal name is clk_ptp_ref_i.
+  - "phy_ref_clk"
+    This clock is deprecated and should not be used by new compatible values.
+    It is equivalent to "tx".
+  - "apb_pclk"
+    This clock is deprecated and should not be used by new compatible values.
+    It is equivalent to "slave_bus".
+
+  Note: Support for additional IP configurations may require adding the
+  following clocks to this list in the future: clk_rx_125_i, clk_tx_125_i,
+  clk_pmarx_0_i, clk_pmarx1_i, clk_rmii_i, clk_revmii_rx_i, clk_revmii_tx_i.
+  Configurations exist where multiple similar clocks are used at once, e.g. all
+  of clk_rx_125_i, clk_pmarx_0_i, clk_pmarx1_i. For this reason it is best to
+  extend the binding with a separate clock-names entry for each of those RX
+  clocks, rather than repurposing the existing "rx" clock-names entry as a
+  generic/logical clock in a similar fashion to "master_bus" and "slave_bus".
+  This will allow easy support for configurations that support multiple PHY
+  interfaces using a mux, and hence need to have explicit control over
+  specific RX clocks.
+
+  The following compatible values require the following set of clocks:
+  - "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10":
+    - "slave_bus"
+    - "master_bus"
+    - "rx"
+    - "tx"
+    - "ptp_ref"
+  - "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10":
+    - "slave_bus"
+    - "master_bus"
+    - "tx"
+    - "ptp_ref"
+  - "snps,dwc-qos-ethernet-4.10" (deprecated):
+    - "phy_ref_clk"
+    - "apb_clk"
+- interrupts: Should contain the core's combined interrupt signal
+- phy-mode: See ethernet.txt file in the same directory
+- resets: Phandle and reset specifiers for each entry in reset-names, in the
+  same order. See ../reset/reset.txt.
+- reset-names: May contain any/all of the following depending on the IP
+  configuration, in any order:
+  - "eqos". The reset to the entire module. The HW signal name is hreset_n
+    (AHB) or aresetn_i (AXI).
+
+  The following compatible values require the following set of resets:
+  (the reset properties may be omitted if empty)
+  - "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10":
+    - "eqos".
+  - "axis,artpec6-eqos", "snps,dwc-qos-ethernet-4.10":
+    - None.
+  - "snps,dwc-qos-ethernet-4.10" (deprecated):
+    - None.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+- phy-reset-gpios: Phandle and specifier for any GPIO used to reset the PHY.
+  See ../gpio/gpio.txt.
+- snps,en-lpi: If present it enables use of the AXI low-power interface
+- snps,write-requests: Number of write requests that the AXI port can issue.
+  It depends on the SoC configuration.
+- snps,read-requests: Number of read requests that the AXI port can issue.
+  It depends on the SoC configuration.
+- snps,burst-map: Bitmap of allowed AXI burst lengths, with the LSB
+  representing 4, then 8 etc.
+- snps,txpbl: DMA Programmable burst length for the TX DMA
+- snps,rxpbl: DMA Programmable burst length for the RX DMA
+- snps,en-tx-lpi-clockgating: Enable gating of the MAC TX clock during
+  TX low-power mode.
+- phy-handle: See ethernet.txt file in the same directory
+- mdio device tree subnode: When the GMAC has a phy connected to its local
+    mdio, there must be device tree subnode with the following
+    required properties:
+    - compatible: Must be "snps,dwc-qos-ethernet-mdio".
+    - #address-cells: Must be <1>.
+    - #size-cells: Must be <0>.
+
+    For each phy on the mdio bus, there must be a node with the following
+    fields:
+
+    - reg: phy id used to communicate to phy.
+    - device_type: Must be "ethernet-phy".
+    - fixed-mode device tree subnode: see fixed-link.txt in the same directory
+
+The MAC address will be determined using the optional properties
+defined in ethernet.txt.
+
+Examples:
+ethernet2@40010000 {
+	clock-names = "phy_ref_clk", "apb_pclk";
+	clocks = <&clkc 17>, <&clkc 15>;
+	compatible = "snps,dwc-qos-ethernet-4.10";
+	interrupt-parent = <&intc>;
+	interrupts = <0x0 0x1e 0x4>;
+	reg = <0x40010000 0x4000>;
+	phy-handle = <&phy2>;
+	phy-mode = "gmii";
+	phy-reset-gpios = <&gpioctlr 43 GPIO_ACTIVE_LOW>;
+
+	snps,en-tx-lpi-clockgating;
+	snps,en-lpi;
+	snps,write-requests = <2>;
+	snps,read-requests = <16>;
+	snps,burst-map = <0x7>;
+	snps,txpbl = <8>;
+	snps,rxpbl = <2>;
+
+	dma-coherent;
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		phy2: phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x1>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
new file mode 100644
index 0000000000..5c2769dc68
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -0,0 +1,740 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MAC
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Giuseppe Cavallaro <peppe.cavallaro@st.com>
+  - Jose Abreu <joabreu@synopsys.com>
+
+# Select every compatible, including the deprecated ones. This way, we
+# will be able to report a warning when we have that compatible, since
+# we will validate the node thanks to the select, but won't report it
+# as a valid value in the compatible property description
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - snps,dwmac
+          - snps,dwmac-3.40a
+          - snps,dwmac-3.50a
+          - snps,dwmac-3.610
+          - snps,dwmac-3.70a
+          - snps,dwmac-3.710
+          - snps,dwmac-4.00
+          - snps,dwmac-4.10a
+          - snps,dwmac-4.20a
+          - snps,dwmac-5.10a
+          - snps,dwmac-5.20
+          - snps,dwxgmac
+          - snps,dwxgmac-2.10
+
+          # Deprecated
+          - st,spear600-gmac
+
+  required:
+    - compatible
+
+properties:
+
+  # We need to include all the compatibles from schemas that will
+  # include that schemas, otherwise compatible won't validate for
+  # those.
+  compatible:
+    contains:
+      enum:
+        - allwinner,sun7i-a20-gmac
+        - allwinner,sun8i-a83t-emac
+        - allwinner,sun8i-h3-emac
+        - allwinner,sun8i-r40-gmac
+        - allwinner,sun8i-v3s-emac
+        - allwinner,sun50i-a64-emac
+        - amlogic,meson6-dwmac
+        - amlogic,meson8b-dwmac
+        - amlogic,meson8m2-dwmac
+        - amlogic,meson-gxbb-dwmac
+        - amlogic,meson-axg-dwmac
+        - ingenic,jz4775-mac
+        - ingenic,x1000-mac
+        - ingenic,x1600-mac
+        - ingenic,x1830-mac
+        - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
+        - qcom,qcs404-ethqos
+        - qcom,sa8775p-ethqos
+        - qcom,sc8280xp-ethqos
+        - qcom,sm8150-ethqos
+        - renesas,r9a06g032-gmac
+        - renesas,rzn1-gmac
+        - rockchip,px30-gmac
+        - rockchip,rk3128-gmac
+        - rockchip,rk3228-gmac
+        - rockchip,rk3288-gmac
+        - rockchip,rk3328-gmac
+        - rockchip,rk3366-gmac
+        - rockchip,rk3368-gmac
+        - rockchip,rk3588-gmac
+        - rockchip,rk3399-gmac
+        - rockchip,rv1108-gmac
+        - snps,dwmac
+        - snps,dwmac-3.40a
+        - snps,dwmac-3.50a
+        - snps,dwmac-3.610
+        - snps,dwmac-3.70a
+        - snps,dwmac-3.710
+        - snps,dwmac-4.00
+        - snps,dwmac-4.10a
+        - snps,dwmac-4.20a
+        - snps,dwmac-5.10a
+        - snps,dwmac-5.20
+        - snps,dwxgmac
+        - snps,dwxgmac-2.10
+        - starfive,jh7110-dwmac
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined signal for various interrupt events
+      - description: The interrupt to manage the remote wake-up packet detection
+      - description: The interrupt that occurs when Rx exits the LPI state
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: macirq
+      - enum: [eth_wake_irq, eth_lpi]
+      - const: eth_lpi
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+    additionalItems: true
+    items:
+      - description: GMAC main clock
+      - description: Peripheral registers interface clock
+      - description:
+          PTP reference clock. This clock is used for programming the
+          Timestamp Addend Register. If not passed then the system
+          clock will be used and this is fine on some platforms.
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+    additionalItems: true
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+
+  resets:
+    minItems: 1
+    items:
+      - description: GMAC stmmaceth reset
+      - description: AHB reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: stmmaceth
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
+
+  mac-mode:
+    $ref: ethernet-controller.yaml#/properties/phy-connection-type
+    description:
+      The property is identical to 'phy-mode', and assumes that there is mode
+      converter in-between the MAC & PHY (e.g. GMII-to-RGMII). This converter
+      can be passive (no SW requirement), and requires that the MAC operate
+      in a different mode than the PHY in order to function.
+
+  snps,axi-config:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      AXI BUS Mode parameters. Phandle to a node that can contain the
+      following properties
+        * snps,lpi_en, enable Low Power Interface
+        * snps,xit_frm, unlock on WoL
+        * snps,wr_osr_lmt, max write outstanding req. limit
+        * snps,rd_osr_lmt, max read outstanding req. limit
+        * snps,kbbe, do not cross 1KiB boundary.
+        * snps,blen, this is a vector of supported burst length.
+        * snps,fb, fixed-burst
+        * snps,mb, mixed-burst
+        * snps,rb, rebuild INCRx Burst
+
+  snps,mtl-rx-config:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Multiple RX Queues parameters. Phandle to a node that
+      implements the 'rx-queues-config' object described in
+      this binding.
+
+  rx-queues-config:
+    type: object
+    properties:
+      snps,rx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of RX queues to be used in the driver
+      snps,rx-sched-sp:
+        type: boolean
+        description: Strict priority
+      snps,rx-sched-wsp:
+        type: boolean
+        description: Weighted Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,rx-sched-sp
+        then:
+          properties:
+            snps,rx-sched-wsp: false
+      - if:
+          required:
+            - snps,rx-sched-wsp
+        then:
+          properties:
+            snps,rx-sched-sp: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,dcb-algorithm:
+            type: boolean
+            description: Queue to be enabled as DCB
+          snps,avb-algorithm:
+            type: boolean
+            description: Queue to be enabled as AVB
+          snps,map-to-dma-channel:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: DMA channel id to map
+          snps,route-avcp:
+            type: boolean
+            description: AV Untagged Control packets
+          snps,route-ptp:
+            type: boolean
+            description: PTP Packets
+          snps,route-dcbcp:
+            type: boolean
+            description: DCB Control Packets
+          snps,route-up:
+            type: boolean
+            description: Untagged Packets
+          snps,route-multi-broad:
+            type: boolean
+            description: Multicast & Broadcast Packets
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Bitmask of the tagged frames priorities assigned to the queue
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+          - if:
+              required:
+                - snps,route-avcp
+            then:
+              properties:
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-ptp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-dcbcp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-up
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-multi-broad
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+        additionalProperties: false
+    additionalProperties: false
+
+  snps,mtl-tx-config:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Multiple TX Queues parameters. Phandle to a node that
+      implements the 'tx-queues-config' object described in
+      this binding.
+
+  tx-queues-config:
+    type: object
+    properties:
+      snps,tx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of TX queues to be used in the driver
+      snps,tx-sched-wrr:
+        type: boolean
+        description: Weighted Round Robin
+      snps,tx-sched-wfq:
+        type: boolean
+        description: Weighted Fair Queuing
+      snps,tx-sched-dwrr:
+        type: boolean
+        description: Deficit Weighted Round Robin
+      snps,tx-sched-sp:
+        type: boolean
+        description: Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,tx-sched-wrr
+        then:
+          properties:
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-wfq
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-dwrr
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-sp
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,weight:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: TX queue weight (if using a DCB weight algorithm)
+          snps,dcb-algorithm:
+            type: boolean
+            description: TX queue will be working in DCB
+          snps,avb-algorithm:
+            type: boolean
+            description:
+              TX queue will be working in AVB.
+              Queue 0 is reserved for legacy traffic and so no AVB is
+              available in this queue.
+          snps,send_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: enable Low Power Interface
+          snps,idle_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: unlock on WoL
+          snps,high_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max write outstanding req. limit
+          snps,low_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max read outstanding req. limit
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Bitmask of the tagged frames priorities assigned to the queue.
+              When a PFC frame is received with priorities matching the bitmask,
+              the queue is blocked from transmitting for the pause time specified
+              in the PFC frame.
+
+          snps,coe-unsupported:
+            type: boolean
+            description: TX checksum offload is unsupported by the TX queue.
+
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+                snps,weight: false
+        additionalProperties: false
+    additionalProperties: false
+
+  snps,reset-gpio:
+    deprecated: true
+    maxItems: 1
+    description:
+      PHY Reset GPIO
+
+  snps,reset-active-low:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the PHY Reset is active low
+
+  snps,reset-delays-us:
+    deprecated: true
+    description:
+      Triplet of delays. The 1st cell is reset pre-delay in micro
+      seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
+      cell is reset post-delay in micro seconds.
+    minItems: 3
+    maxItems: 3
+
+  snps,aal:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Use Address-Aligned Beats
+
+  snps,fixed-burst:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Program the DMA to use the fixed burst mode
+
+  snps,mixed-burst:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Program the DMA to use the mixed burst mode
+
+  snps,force_thresh_dma_mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Force DMA to use the threshold mode for both tx and rx
+
+  snps,force_sf_dma_mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Force DMA to use the Store and Forward mode for both tx and
+      rx. This flag is ignored if force_thresh_dma_mode is set.
+
+  snps,en-tx-lpi-clockgating:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable gating of the MAC TX clock during TX low-power mode
+
+  snps,multicast-filter-bins:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of multicast filter hash bins supported by this device
+      instance
+
+  snps,perfect-filter-entries:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of perfect filter entries supported by this device
+      instance
+
+  snps,ps-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Port selection speed that can be passed to the core when PCS
+      is supported. For example, this is used in case of SGMII and
+      MAC2MAC connection.
+
+  snps,clk-csr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Frequency division factor for MDC clock.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Creates and registers an MDIO bus.
+
+    properties:
+      compatible:
+        const: snps,dwmac-mdio
+
+    required:
+      - compatible
+
+  stmmac-axi-config:
+    type: object
+    unevaluatedProperties: false
+    description:
+      AXI BUS Mode parameters.
+
+    properties:
+      snps,lpi_en:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          enable Low Power Interface
+
+      snps,xit_frm:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          unlock on WoL
+
+      snps,wr_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max write outstanding req. limit
+
+      snps,rd_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max read outstanding req. limit
+
+      snps,kbbe:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          do not cross 1KiB boundary.
+
+      snps,blen:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          this is a vector of supported burst length.
+        minItems: 7
+        maxItems: 7
+
+      snps,fb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          fixed-burst
+
+      snps,mb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          mixed-burst
+
+      snps,rb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          rebuild INCRx Burst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - phy-mode
+
+dependencies:
+  snps,reset-active-low: ["snps,reset-gpio"]
+  snps,reset-delays-us: ["snps,reset-gpio"]
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun7i-a20-gmac
+              - allwinner,sun8i-a83t-emac
+              - allwinner,sun8i-h3-emac
+              - allwinner,sun8i-r40-gmac
+              - allwinner,sun8i-v3s-emac
+              - allwinner,sun50i-a64-emac
+              - ingenic,jz4775-mac
+              - ingenic,x1000-mac
+              - ingenic,x1600-mac
+              - ingenic,x1830-mac
+              - ingenic,x2000-mac
+              - qcom,sa8775p-ethqos
+              - qcom,sc8280xp-ethqos
+              - snps,dwmac-3.50a
+              - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
+              - snps,dwmac-5.20
+              - snps,dwxgmac
+              - snps,dwxgmac-2.10
+              - st,spear600-gmac
+
+    then:
+      properties:
+        snps,pbl:
+          description:
+            Programmable Burst Length (tx and rx)
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [1, 2, 4, 8, 16, 32]
+
+        snps,txpbl:
+          description:
+            Tx Programmable Burst Length. If set, DMA tx will use this
+            value rather than snps,pbl.
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [1, 2, 4, 8, 16, 32]
+
+        snps,rxpbl:
+          description:
+            Rx Programmable Burst Length. If set, DMA rx will use this
+            value rather than snps,pbl.
+          $ref: /schemas/types.yaml#/definitions/uint32
+          enum: [1, 2, 4, 8, 16, 32]
+
+        snps,no-pbl-x8:
+          $ref: /schemas/types.yaml#/definitions/flag
+          description:
+            Don\'t multiply the pbl/txpbl/rxpbl values by 8. For core
+            rev < 3.50, don\'t multiply the values by 4.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun7i-a20-gmac
+              - allwinner,sun8i-a83t-emac
+              - allwinner,sun8i-h3-emac
+              - allwinner,sun8i-r40-gmac
+              - allwinner,sun8i-v3s-emac
+              - allwinner,sun50i-a64-emac
+              - loongson,ls2k-dwmac
+              - loongson,ls7a-dwmac
+              - ingenic,jz4775-mac
+              - ingenic,x1000-mac
+              - ingenic,x1600-mac
+              - ingenic,x1830-mac
+              - ingenic,x2000-mac
+              - qcom,qcs404-ethqos
+              - qcom,sa8775p-ethqos
+              - qcom,sc8280xp-ethqos
+              - qcom,sm8150-ethqos
+              - snps,dwmac-4.00
+              - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
+              - snps,dwmac-5.10a
+              - snps,dwmac-5.20
+              - snps,dwxgmac
+              - snps,dwxgmac-2.10
+              - st,spear600-gmac
+
+    then:
+      properties:
+        snps,tso:
+          $ref: /schemas/types.yaml#/definitions/flag
+          description:
+            Enables the TSO feature otherwise it will be managed by
+            MAC HW capability register.
+
+additionalProperties: true
+
+examples:
+  - |
+    gmac0: ethernet@e0800000 {
+        compatible = "snps,dwxgmac-2.10", "snps,dwxgmac";
+        reg = <0xe0800000 0x8000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <24 23 22>;
+        interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+        mac-address = [000000000000]; /* Filled in by U-Boot */
+        max-frame-size = <3800>;
+        phy-mode = "gmii";
+        snps,multicast-filter-bins = <256>;
+        snps,perfect-filter-entries = <128>;
+        rx-fifo-depth = <16384>;
+        tx-fifo-depth = <16384>;
+        clocks = <&clock>;
+        clock-names = "stmmaceth";
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,mtl-rx-config = <&mtl_rx_setup>;
+        snps,mtl-tx-config = <&mtl_tx_setup>;
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,wr_osr_lmt = <0xf>;
+            snps,rd_osr_lmt = <0xf>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+
+        mtl_rx_setup: rx-queues-config {
+            snps,rx-queues-to-use = <1>;
+            snps,rx-sched-sp;
+            queue0 {
+                snps,dcb-algorithm;
+                snps,map-to-dma-channel = <0x0>;
+                snps,priority = <0x0>;
+            };
+        };
+
+        mtl_tx_setup: tx-queues-config {
+            snps,tx-queues-to-use = <2>;
+            snps,tx-sched-wrr;
+            queue0 {
+                snps,weight = <0x10>;
+                snps,dcb-algorithm;
+                snps,priority = <0x0>;
+            };
+
+            queue1 {
+                snps,avb-algorithm;
+                snps,send_slope = <0x1000>;
+                snps,idle_slope = <0x1000>;
+                snps,high_credit = <0x3E800>;
+                snps,low_credit = <0xFFC18000>;
+                snps,priority = <0x1>;
+            };
+        };
+
+        mdio0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+            phy1: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+    };
+
+# FIXME: We should set it, but it would report all the generic
+# properties as additional properties.
+# additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
new file mode 100644
index 0000000000..612a8e8abc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
@@ -0,0 +1,57 @@
+Altera SOCFPGA SoC DWMAC controller
+
+This is a variant of the dwmac/stmmac driver an inherits all descriptions
+present in Documentation/devicetree/bindings/net/stmmac.txt.
+
+The device node has additional properties:
+
+Required properties:
+ - compatible	: For Cyclone5/Arria5 SoCs it should contain
+		  "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs
+		  "altr,socfpga-stmmac-a10-s10".
+		  Along with "snps,dwmac" and any applicable more detailed
+		  designware version numbers documented in stmmac.txt
+ - altr,sysmgr-syscon : Should be the phandle to the system manager node that
+   encompasses the glue register, the register offset, and the register shift.
+   On Cyclone5/Arria5, the register shift represents the PHY mode bits, while
+   on the Arria10/Stratix10/Agilex platforms, the register shift represents
+   bit for each emac to enable/disable signals from the FPGA fabric to the
+   EMAC modules.
+ - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
+   for ptp ref clk. This affects all emacs as the clock is common.
+
+Optional properties:
+altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
+		DWMAC controller is connected emac splitter.
+phy-mode: The phy mode the ethernet operates in
+altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
+
+This device node has additional phandle dependency, the sgmii converter:
+
+Required properties:
+ - compatible	: Should be altr,gmii-to-sgmii-2.0
+ - reg-names	: Should be "eth_tse_control_port"
+
+Example:
+
+gmii_to_sgmii_converter: phy@100000240 {
+	compatible = "altr,gmii-to-sgmii-2.0";
+	reg = <0x00000001 0x00000240 0x00000008>,
+		<0x00000001 0x00000200 0x00000040>;
+	reg-names = "eth_tse_control_port";
+	clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
+	clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
+};
+
+gmac0: ethernet@ff700000 {
+	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+	reg = <0xff700000 0x2000>;
+	interrupts = <0 115 4>;
+	interrupt-names = "macirq";
+	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+	clocks = <&emac_0_clk>;
+	clock-names = "stmmaceth";
+	phy-mode = "sgmii";
+	altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
+};
diff --git a/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml b/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml
new file mode 100644
index 0000000000..a65e6aa215
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socionext,synquacer-netsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext NetSec Ethernet Controller IP
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+  - Ilias Apalodimas <ilias.apalodimas@linaro.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-netsec
+
+  reg:
+    items:
+      - description: control register area
+      - description: EEPROM holding the MAC address and microengine firmware
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phy_ref_clk
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  mdio:
+    $ref: mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@522d0000 {
+        compatible = "socionext,synquacer-netsec";
+        reg = <0x522d0000 0x10000>, <0x10000000 0x10000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_netsec>;
+        clock-names = "phy_ref_clk";
+        phy-mode = "rgmii";
+        max-speed = <1000>;
+        max-frame-size = <9000>;
+        phy-handle = <&phy1>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
new file mode 100644
index 0000000000..b0ebcef680
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socionext,uniphier-ave4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext AVE ethernet controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |
+  This describes the devicetree bindings for AVE ethernet controller
+  implemented on Socionext UniPhier SoCs.
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-ave4
+      - socionext,uniphier-pxs2-ave4
+      - socionext,uniphier-ld11-ave4
+      - socionext,uniphier-ld20-ave4
+      - socionext,uniphier-pxs3-ave4
+      - socionext,uniphier-nx1-ave4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  mac-address: true
+
+  local-mac-address: true
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+  socionext,syscon-phy-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: ID of MAC instance
+    description:
+      A phandle to syscon with one argument that configures phy mode.
+      The argument is the ID of MAC instance.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ave4
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: gio
+            - const: ether
+            - const: ether-gb
+            - const: ether-phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: ether
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: ether
+        resets:
+          maxItems: 1
+        reset-names:
+          const: ether
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-mode
+  - phy-handle
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ether: ethernet@65000000 {
+        compatible = "socionext,uniphier-ld20-ave4";
+                reg = <0x65000000 0x8500>;
+                interrupts = <0 66 4>;
+                phy-mode = "rgmii";
+                phy-handle = <&ethphy>;
+                clock-names = "ether";
+                clocks = <&sys_clk 6>;
+                reset-names = "ether";
+                resets = <&sys_rst 6>;
+                socionext,syscon-phy-mode = <&soc_glue 0>;
+
+                mdio {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        ethphy: ethernet-phy@1 {
+                                reg = <1>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
new file mode 100644
index 0000000000..5e7cfbbebc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 StarFive Technology Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DWMAC glue layer
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+  - Samin Guo <samin.guo@starfivetech.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh7110-dwmac
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7110-dwmac
+      - const: snps,dwmac-5.20
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: GMAC AHB clock
+      - description: PTP clock
+      - description: TX clock
+      - description: GTX clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - const: tx
+      - const: gtx
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 3
+    maxItems: 3
+
+  resets:
+    items:
+      - description: MAC Reset signal.
+      - description: AHB Reset signal.
+
+  reset-names:
+    items:
+      - const: stmmaceth
+      - const: ahb
+
+  starfive,tx-use-rgmii-clk:
+    description:
+      Tx clock is provided by external rgmii clock.
+    type: boolean
+
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: Offset of phy mode selection
+          - description: Shift of phy mode selection
+    description:
+      A phandle to syscon with two arguments that configure phy mode.
+      The argument one is the offset of phy mode selection, the
+      argument two is the shift of phy mode selection.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@16030000 {
+        compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+        reg = <0x16030000 0x10000>;
+        clocks = <&clk 3>, <&clk 2>, <&clk 109>,
+                 <&clk 6>, <&clk 111>;
+        clock-names = "stmmaceth", "pclk", "ptp_ref",
+                      "tx", "gtx";
+        resets = <&rst 1>, <&rst 2>;
+        reset-names = "stmmaceth", "ahb";
+        interrupts = <7>, <6>, <5>;
+        interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+        phy-mode = "rgmii-id";
+        snps,multicast-filter-bins = <64>;
+        snps,perfect-filter-entries = <8>;
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        snps,fixed-burst;
+        snps,no-pbl-x8;
+        snps,tso;
+        snps,force_thresh_dma_mode;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,en-tx-lpi-clockgating;
+        snps,txpbl = <16>;
+        snps,rxpbl = <16>;
+        starfive,syscon = <&aon_syscon 0xc 0x12>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,lpi_en;
+            snps,wr_osr_lmt = <4>;
+            snps,rd_osr_lmt = <4>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
new file mode 100644
index 0000000000..e16287c06e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -0,0 +1,59 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+This file documents differences between the core properties in
+Documentation/devicetree/bindings/net/stmmac.txt
+and what is needed on STi platforms to program the stmmac glue logic.
+
+The device node has following properties.
+
+Required properties:
+ - compatible	: "st,stih407-dwmac"
+ - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
+   encompases the glue register, and the offset of the control register.
+ - st,gmac_en: this is to enable the gmac into a dedicated sysctl control
+   register available on STiH407 SoC.
+ - pinctrl-0: pin-control for all the MII mode supported.
+
+Optional properties:
+ - resets : phandle pointing to the system reset controller with correct
+   reset line index for ethernet reset.
+ - st,ext-phyclk: valid only for RMII where PHY can generate 50MHz clock or
+   MAC can generate it.
+ - st,tx-retime-src: This specifies which clk is wired up to the mac for
+   retimeing tx lines. This is totally board dependent and can take one of the
+   possible values from "txclk", "clk_125" or "clkgen".
+   If not passed, the internal clock will be used by default.
+ - sti-ethclk: this is the phy clock.
+ - sti-clkconf: this is an extra sysconfig register, available in new SoCs,
+   to program the clk retiming.
+ - st,gmac_en: to enable the GMAC, this only is present in some SoCs; e.g.
+   STiH407.
+
+Example:
+
+ethernet0: dwmac@9630000 {
+	device_type = "network";
+	compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+	reg = <0x9630000 0x8000>;
+	reg-names = "stmmaceth";
+
+	st,syscon = <&syscfg_sbc_reg 0x80>;
+	st,gmac_en;
+	resets = <&softreset STIH407_ETH1_SOFTRESET>;
+	reset-names = "stmmaceth";
+
+	interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+		     <GIC_SPI 99 IRQ_TYPE_NONE>,
+		     <GIC_SPI 100 IRQ_TYPE_NONE>;
+	interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+	snps,pbl = <32>;
+	snps,mixed-burst;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+
+	clock-names = "stmmaceth", "sti-ethclk";
+	clocks = <&CLK_S_C0_FLEXGEN CLK_EXT2F_A9>,
+		 <&CLK_S_C0_FLEXGEN CLK_ETH_PHY>;
+};
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
new file mode 100644
index 0000000000..fc8c96b08d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/stm32-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32-dwmac
+          - st,stm32mp1-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32mp1-dwmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-4.10a
+      - items:
+          - enum:
+              - st,stm32-dwmac
+          - const: snps,dwmac-3.50a
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: stmmaceth
+
+  clocks:
+    minItems: 3
+    items:
+      - description: GMAC main clock
+      - description: MAC TX clock
+      - description: MAC RX clock
+      - description: For MPU family, used for power mode
+      - description: For MPU family, used for PHY without quartz
+      - description: PTP clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+    contains:
+      enum:
+        - stmmaceth
+        - mac-clk-tx
+        - mac-clk-rx
+        - ethstp
+        - eth-ck
+        - ptp_ref
+
+  st,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the syscon node which encompases the glue register
+          - description: offset of the control register
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the glue register, and the offset of the control register
+
+  st,eth-clk-sel:
+    description:
+      set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
+    type: boolean
+
+  st,eth-ref-clk-sel:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK.
+    type: boolean
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - st,syscon
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 1
+     ethernet0: ethernet@5800a000 {
+           compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth",
+                     "mac-clk-tx",
+                     "mac-clk-rx",
+                     "ethstp",
+                     "eth-ck";
+           clocks = <&rcc ETHMAC>,
+                <&rcc ETHTX>,
+                <&rcc ETHRX>,
+                <&rcc ETHSTP>,
+                <&rcc ETHCK_K>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_0>;
+           snps,tso;
+           phy-mode = "rgmii";
+       };
+
+  - |
+    //Example 2 (MCU example)
+     ethernet1: ethernet@40028000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <0 61 0>, <0 62 0>;
+           interrupt-names = "macirq", "eth_wake_irq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           snps,mixed-burst;
+           phy-mode = "mii";
+       };
+
+  - |
+    //Example 3
+     ethernet2: ethernet@40027000 {
+           compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+           reg = <0x40028000 0x8000>;
+           reg-names = "stmmaceth";
+           interrupts = <61>;
+           interrupt-names = "macirq";
+           clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
+           clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
+           st,syscon = <&syscfg 0x4>;
+           snps,pbl = <8>;
+           phy-mode = "mii";
+       };
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
new file mode 100644
index 0000000000..7d48782767
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -0,0 +1 @@
+This file has moved to snps,dwmac.yaml.
diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
new file mode 100644
index 0000000000..5b13009744
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Dual Ethernet MAC
+
+maintainers:
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  Sunplus SP7021 dual 10M/100M Ethernet MAC controller.
+  Device node of the controller has following properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+    description: Ethernet ports to PHY
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^port@[0-1]$":
+        type: object
+        additionalProperties: false
+        description: Port to PHY
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 1
+
+          phy-handle:
+            maxItems: 1
+
+          phy-mode:
+            maxItems: 1
+
+          nvmem-cells:
+            items:
+              - description: nvmem cell address of MAC address
+
+          nvmem-cell-names:
+            description: names corresponding to the nvmem cells
+            items:
+              - const: mac-address
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - nvmem-cells
+          - nvmem-cell-names
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - pinctrl-0
+  - pinctrl-names
+  - ethernet-ports
+  - mdio
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@9c108000 {
+        compatible = "sunplus,sp7021-emac";
+        reg = <0x9c108000 0x400>;
+        interrupt-parent = <&intc>;
+        interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0xa7>;
+        resets = <&rstc 0x97>;
+        pinctrl-0 = <&emac_demo_board_v3_pins>;
+        pinctrl-names = "default";
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr0>;
+                nvmem-cell-names = "mac-address";
+            };
+
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr1>;
+                nvmem-cell-names = "mac-address";
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+
+            eth_phy1: ethernet-phy@1 {
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/ti,bluetooth.yaml b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
new file mode 100644
index 0000000000..81616f9fb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Bluetooth Chips
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description: |
+  This documents the binding structure and common properties for serial
+  attached TI Bluetooth devices. The following chips are included in this
+  binding:
+
+  * TI CC256x Bluetooth devices
+  * TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+
+  TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
+  and GPS over what's called "shared transport". The shared transport is
+  standard BT HCI protocol with additional channels for the other functions.
+
+  TI WiLink devices also have a separate WiFi interface as described in
+  wireless/ti,wlcore.yaml.
+
+  This bindings follows the UART slave device binding in ../serial/serial.yaml.
+
+properties:
+  compatible:
+    enum:
+      - ti,cc2560
+      - ti,wl1271-st
+      - ti,wl1273-st
+      - ti,wl1281-st
+      - ti,wl1283-st
+      - ti,wl1285-st
+      - ti,wl1801-st
+      - ti,wl1805-st
+      - ti,wl1807-st
+      - ti,wl1831-st
+      - ti,wl1835-st
+      - ti,wl1837-st
+
+  enable-gpios:
+    maxItems: 1
+
+  vio-supply:
+    description: Vio input supply (1.8V)
+
+  vbat-supply:
+    description: Vbat input supply (2.9-4.8V)
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ext_clock
+
+  max-speed:
+    default: 3000000
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell that contains a 6 byte BD address with the most
+      significant byte first (big-endian).
+
+  nvmem-cell-names:
+    items:
+      - const: bd-address
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serial {
+            bluetooth {
+                    compatible = "ti,wl1835-st";
+                    enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+                    clocks = <&clk32k_wl18xx>;
+                    clock-names = "ext_clock";
+                    nvmem-cells = <&bd_address>;
+                    nvmem-cell-names = "bd-address";
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
new file mode 100644
index 0000000000..b04ac49666
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SoC Ethernet Switch Controller (CPSW)
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+  - Sekhar Nori <nsekhar@ti.com>
+
+description:
+  The 3-port switch gigabit ethernet subsystem provides ethernet packet
+  communication and can be configured as an ethernet switch. It provides the
+  gigabit media independent interface (GMII),reduced gigabit media
+  independent interface (RGMII), reduced media independent interface (RMII),
+  the management data input output (MDIO) for physical layer device (PHY)
+  management.
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,cpsw-switch
+      - items:
+          - const: ti,am335x-cpsw-switch
+          - const: ti,cpsw-switch
+      - items:
+          - const: ti,am4372-cpsw-switch
+          - const: ti,cpsw-switch
+      - items:
+          - const: ti,dra7-cpsw-switch
+          - const: ti,cpsw-switch
+
+  reg:
+    maxItems: 1
+    description:
+      The physical base address and size of full the CPSW module IO range
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clocks:
+    maxItems: 1
+    description: CPSW functional clock
+
+  clock-names:
+    items:
+      - const: fck
+
+  interrupts:
+    items:
+      - description: RX_THRESH interrupt
+      - description: RX interrupt
+      - description: TX interrupt
+      - description: MISC interrupt
+
+  interrupt-names:
+    items:
+      - const: rx_thresh
+      - const: rx
+      - const: tx
+      - const: misc
+
+  pinctrl-names: true
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the system control device node which provides access to
+      efuse IO range with MAC addresses
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9]+$":
+        type: object
+        description: CPSW external ports
+
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            items:
+              - enum: [1, 2]
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,dual-emac-pvid:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 1
+            maximum: 1024
+            description:
+              Specifies default PORT VID to be used to segregate
+              ports. Default value - CPSW port number.
+
+        required:
+          - reg
+          - phys
+
+  cpts:
+    type: object
+    unevaluatedProperties: false
+    description:
+      The Common Platform Time Sync (CPTS) module
+
+    properties:
+      clocks:
+        maxItems: 1
+        description: CPTS reference clock
+
+      clock-names:
+        items:
+          - const: cpts
+
+      cpts_clock_mult:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Numerator to convert input clock ticks into ns
+
+      cpts_clock_shift:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Denominator to convert input clock ticks into ns.
+          Mult and shift will be calculated basing on CPTS rftclk frequency if
+          both cpts_clock_shift and cpts_clock_mult properties are not provided.
+
+    required:
+      - clocks
+      - clock-names
+
+patternProperties:
+  "^mdio@":
+    type: object
+    description:
+      CPSW MDIO bus.
+    $ref: ti,davinci-mdio.yaml#
+
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/dra7.h>
+
+    mac_sw: switch@0 {
+        compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+        reg = <0x0 0x4000>;
+        ranges = <0 0 0x4000>;
+        clocks = <&gmac_main_clk>;
+        clock-names = "fck";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        syscon = <&scm_conf>;
+
+        interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+        ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpsw_port1: port@1 {
+                        reg = <1>;
+                        label = "port1";
+                        mac-address = [ 00 00 00 00 00 00 ];
+                        phys = <&phy_gmii_sel 1>;
+                        phy-handle = <&ethphy0_sw>;
+                        phy-mode = "rgmii";
+                        ti,dual-emac-pvid = <1>;
+                };
+
+                cpsw_port2: port@2 {
+                        reg = <2>;
+                        label = "wan";
+                        mac-address = [ 00 00 00 00 00 00 ];
+                        phys = <&phy_gmii_sel 2>;
+                        phy-handle = <&ethphy1_sw>;
+                        phy-mode = "rgmii";
+                        ti,dual-emac-pvid = <2>;
+                };
+        };
+
+        davinci_mdio_sw: mdio@1000 {
+                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+                reg = <0x1000 0x100>;
+                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+                clock-names = "fck";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                bus_freq = <1000000>;
+
+                ethphy0_sw: ethernet-phy@0 {
+                        reg = <0>;
+                };
+
+                ethphy1_sw: ethernet-phy@1 {
+                        reg = <1>;
+                };
+        };
+
+        cpts {
+                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+                clock-names = "cpts";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
new file mode 100644
index 0000000000..53604fab0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,davinci-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SoC Davinci/Keystone2 MDIO Controller
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description:
+  TI SoC Davinci/Keystone2 MDIO Controller
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,davinci_mdio
+      - items:
+          - const: ti,keystone_mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+      - items:
+          - const: ti,am4372-mdio
+          - const: ti,cpsw-mdio
+          - const: ti,davinci_mdio
+
+  reg:
+    maxItems: 1
+
+  bus_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 2500000
+    description: MDIO Bus frequency
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  ti,hwmods:
+    description: TI hwmod name
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      const: davinci_mdio
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: ti,davinci_mdio
+then:
+  required:
+    - bus_freq
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    davinci_mdio: mdio@4a101000 {
+         compatible = "ti,davinci_mdio";
+         #address-cells = <1>;
+         #size-cells = <0>;
+         reg = <0x4a101000 0x1000>;
+         bus_freq = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
new file mode 100644
index 0000000000..db74474207
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,dp83822.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DP83822 ethernet PHY
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
+  provides all of the physical layer functions needed to transmit and receive
+  data over standard, twisted-pair cables or to connect to an external,
+  fiber-optic transceiver. Additionally, the DP83822 provides flexibility to
+  connect to a MAC through a standard MII, RMII, or RGMII interface
+
+  Specifications about the Ethernet PHY can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83822i.pdf
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,link-loss-low:
+    type: boolean
+    description: |
+       DP83822 PHY in Fiber mode only.
+       Sets the DP83822 to detect a link drop condition when the signal goes
+       high.  If not set then link drop will occur when the signal goes low.
+       This property is only applicable if the fiber mode support is strapped
+       to on.
+
+  ti,fiber-mode:
+    type: boolean
+    description: |
+       DP83822 PHY only.
+       If present the DP83822 PHY is configured to operate in fiber mode
+       Fiber mode support can also be strapped. If the strap pin is not set
+       correctly or not set at all then this boolean can be used to enable it.
+       If the fiber mode is not strapped then signal detection for the PHY
+       is disabled.
+       In fiber mode, auto-negotiation is disabled and the PHY can only work in
+       100base-fx (full and half duplex) modes.
+
+  rx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the RX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to receive data.
+
+  tx-internal-delay-ps:
+    description: |
+       DP83822 PHY only.
+       Setting this property to a non-zero number sets the TX internal delay
+       for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
+       to transmit data.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        rx-internal-delay-ps = <1>;
+        tx-internal-delay-ps = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
new file mode 100644
index 0000000000..4bc1f98fd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,dp83867.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DP83867 ethernet PHY
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The DP83867 device is a robust, low power, fully featured Physical Layer
+  transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX
+  and 1000BASE-T Ethernet protocols.
+
+  The DP83867 is designed for easy implementation of 10/100/1000 Mbps Ethernet
+  LANs. It interfaces directly to twisted pair media via an external
+  transformer. This device interfaces directly to the MAC layer through the
+  IEEE 802.3 Standard Media Independent Interface (MII), the IEEE 802.3 Gigabit
+  Media Independent Interface (GMII) or Reduced GMII (RGMII).
+
+  Specifications about the Ethernet PHY can be found at:
+    https://www.ti.com/lit/gpn/dp83867ir
+
+properties:
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell containing the value to write to the
+      IO_IMPEDANCE_CTRL field of the IO_MUX_CFG register.
+
+  nvmem-cell-names:
+    items:
+      - const: io_impedance_ctrl
+
+  ti,min-output-impedance:
+    type: boolean
+    description: |
+       MAC Interface Impedance control to set the programmable output impedance
+       to a minimum value (35 ohms).
+
+  ti,max-output-impedance:
+    type: boolean
+    description: |
+      MAC Interface Impedance control to set the programmable output impedance
+      to a maximum value (70 ohms).
+      Note: Specifying an io_impedance_ctrl nvmem cell or one of the
+        ti,min-output-impedance, ti,max-output-impedance properties
+        are mutually exclusive. If more than one is present, an nvmem
+        cell takes precedence over ti,max-output-impedance, which in
+        turn takes precedence over ti,min-output-impedance.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Transmitt FIFO depth see dt-bindings/net/ti-dp83867.h for values
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Receive FIFO depth see dt-bindings/net/ti-dp83867.h for values
+
+  ti,clk-output-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Muxing option for CLK_OUT pin.  See dt-bindings/net/ti-dp83867.h
+      for applicable values. The CLK_OUT pin can also be disabled by this
+      property.  When omitted, the PHY's default will be left as is.
+
+  ti,rx-internal-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
+      for applicable values. Required only if interface type is
+      PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID.
+
+  ti,tx-internal-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
+      for applicable values. Required only if interface type is
+      PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID.
+
+        Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock
+          delays will be left at their default values, as set by the PHY's pin
+          strapping. The default strapping will use a delay of 2.00 ns.  Thus
+          PHY_INTERFACE_MODE_RGMII, by default, does not behave as RGMII with no
+          internal delay, but as PHY_INTERFACE_MODE_RGMII_ID.  The device tree
+          should use "rgmii-id" if internal delays are desired as this may be
+          changed in future to cause "rgmii" mode to disable delays.
+
+  ti,dp83867-rxctrl-strap-quirk:
+    type: boolean
+    description: |
+      This denotes the fact that the board has RX_DV/RX_CTRL pin strapped in
+      mode 1 or 2. To ensure PHY operation, there are specific actions that
+      software needs to take when this pin is strapped in these modes.
+      See data manual for details.
+
+  ti,sgmii-ref-clock-output-enable:
+    type: boolean
+    description: |
+      This denotes which SGMII configuration is used (4 or 6-wire modes).
+      Some MACs work with differential SGMII clock. See data manual for details.
+
+  ti,fifo-depth:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable
+      values.
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/ti-dp83867.h>
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        ti,max-output-impedance;
+        ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_RCLK>;
+        ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+        ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
new file mode 100644
index 0000000000..fb6725df46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,dp83869.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DP83869 ethernet PHY
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver
+  with integrated PMD sublayers that supports 10BASE-Te, 100BASE-TX and
+  1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and
+  100BASE-FX Fiber protocols.
+  This device interfaces to the MAC layer through Reduced GMII (RGMII) and
+  SGMII The DP83869HM supports Media Conversion in Managed mode. In this mode,
+  the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX
+  conversions.  The DP83869HM can also support Bridge Conversion from RGMII to
+  SGMII and SGMII to RGMII.
+
+  Specifications about the Ethernet PHY can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83869hm.pdf
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,min-output-impedance:
+    type: boolean
+    description: |
+       MAC Interface Impedance control to set the programmable output impedance
+       to a minimum value (35 ohms).
+
+  ti,max-output-impedance:
+    type: boolean
+    description: |
+       MAC Interface Impedance control to set the programmable output impedance
+       to a maximum value (70 ohms).
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
+
+  ti,clk-output-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
+
+  ti,op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+       Operational mode for the PHY.  If this is not set then the operational
+       mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
+
+  rx-internal-delay-ps:
+    description: Delay is in pico seconds
+    enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
+            3250, 3500, 3750, 4000 ]
+    default: 2000
+
+  tx-internal-delay-ps:
+    description: Delay is in pico seconds
+    enum: [ 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000,
+            3250, 3500, 3750, 4000 ]
+    default: 2000
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/ti-dp83869.h>
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
+        ti,max-output-impedance;
+        ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
+        rx-internal-delay-ps = <2000>;
+        tx-internal-delay-ps = <2000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,icss-iep.yaml b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
new file mode 100644
index 0000000000..f5c22d6dca
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,icss-iep.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,icss-iep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ICSS Industrial Ethernet Peripheral (IEP) module
+
+maintainers:
+  - Md Danish Anwar <danishanwar@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,am642-icss-iep
+              - ti,j721e-icss-iep
+          - const: ti,am654-icss-iep
+
+      - const: ti,am654-icss-iep
+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the IEP source clock
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM65x */
+    icssg0_iep0: iep@2e000 {
+        compatible = "ti,am654-icss-iep";
+        reg = <0x2e000 0x1000>;
+        clocks = <&icssg0_iepclk_mux>;
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
new file mode 100644
index 0000000000..311c570165
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ICSSG PRUSS Ethernet
+
+maintainers:
+  - Md Danish Anwar <danishanwar@ti.com>
+
+description:
+  Ethernet based on the Programmable Real-Time Unit and Industrial
+  Communication Subsystem.
+
+allOf:
+  - $ref: /schemas/remoteproc/ti,pru-consumer.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-icssg-prueth  # for AM65x SoC family
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to MSMC SRAM node
+
+  dmas:
+    maxItems: 10
+
+  dma-names:
+    items:
+      - const: tx0-0
+      - const: tx0-1
+      - const: tx0-2
+      - const: tx0-3
+      - const: tx1-0
+      - const: tx1-1
+      - const: tx1-2
+      - const: tx1-3
+      - const: rx0
+      - const: rx1
+
+  ti,mii-g-rt:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to MII_G_RT module's syscon regmap.
+
+  ti,mii-rt:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to MII_RT module's syscon regmap
+
+  ti,iep:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      phandle to IEP (Industrial Ethernet Peripheral) for ICSSG
+
+  interrupts:
+    maxItems: 2
+    description:
+      Interrupt specifiers to TX timestamp IRQ.
+
+  interrupt-names:
+    items:
+      - const: tx_ts0
+      - const: tx_ts1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      ^port@[0-1]$:
+        type: object
+        description: ICSSG PRUETH external ports
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            items:
+              - enum: [0, 1]
+            description: ICSSG PRUETH port number
+
+          interrupts:
+            maxItems: 1
+
+          ti,syscon-rgmii-delay:
+            items:
+              - items:
+                  - description: phandle to system controller node
+                  - description: The offset to ICSSG control register
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              phandle to system controller node and register offset
+              to ICSSG control register for RGMII transmit delay
+
+        required:
+          - reg
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+required:
+  - compatible
+  - sram
+  - dmas
+  - dma-names
+  - ethernet-ports
+  - ti,mii-g-rt
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* Example k3-am654 base board SR2.0, dual-emac */
+    pruss2_eth: ethernet {
+        compatible = "ti,am654-icssg-prueth";
+        pinctrl-names = "default";
+        pinctrl-0 = <&icssg2_rgmii_pins_default>;
+        sram = <&msmc_ram>;
+
+        ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+                  <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+        firmware-name = "ti-pruss/am65x-pru0-prueth-fw.elf",
+                        "ti-pruss/am65x-rtu0-prueth-fw.elf",
+                        "ti-pruss/am65x-txpru0-prueth-fw.elf",
+                        "ti-pruss/am65x-pru1-prueth-fw.elf",
+                        "ti-pruss/am65x-rtu1-prueth-fw.elf",
+                        "ti-pruss/am65x-txpru1-prueth-fw.elf";
+        ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+                              <2>,
+                              <2>,
+                              <2>,      /* MII mode */
+                              <2>,
+                              <2>;
+        dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+               <&main_udmap 0xc301>, /* egress slice 0 */
+               <&main_udmap 0xc302>, /* egress slice 0 */
+               <&main_udmap 0xc303>, /* egress slice 0 */
+               <&main_udmap 0xc304>, /* egress slice 1 */
+               <&main_udmap 0xc305>, /* egress slice 1 */
+               <&main_udmap 0xc306>, /* egress slice 1 */
+               <&main_udmap 0xc307>, /* egress slice 1 */
+               <&main_udmap 0x4300>, /* ingress slice 0 */
+               <&main_udmap 0x4301>; /* ingress slice 1 */
+        dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+                    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+                    "rx0", "rx1";
+        ti,mii-g-rt = <&icssg2_mii_g_rt>;
+        ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
+        interrupt-parent = <&icssg2_intc>;
+        interrupts = <24 0 2>, <25 1 3>;
+        interrupt-names = "tx_ts0", "tx_ts1";
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            pruss2_emac0: port@0 {
+                reg = <0>;
+                phy-handle = <&pruss2_eth0_phy>;
+                phy-mode = "rgmii-id";
+                interrupts-extended = <&icssg2_intc 24>;
+                ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+                /* Filled in by bootloader */
+                local-mac-address = [00 00 00 00 00 00];
+            };
+
+            pruss2_emac1: port@1 {
+                reg = <1>;
+                phy-handle = <&pruss2_eth1_phy>;
+                phy-mode = "rgmii-id";
+                interrupts-extended = <&icssg2_intc 25>;
+                ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+                /* Filled in by bootloader */
+                local-mac-address = [00 00 00 00 00 00];
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
new file mode 100644
index 0000000000..c9c25132d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -0,0 +1,317 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+  - Sekhar Nori <nsekhar@ti.com>
+
+description:
+  The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
+  (one external) and provides Ethernet packet communication for the device.
+  The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports
+  (two external) and provides Ethernet packet communication and switching.
+
+  The internal Communications Port Programming Interface (CPPI5) (Host port 0).
+  Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels
+  and one RX channels and operating by NAVSS Unified DMA  Peripheral Root
+  Complex (UDMA-P) controller.
+
+  CPSWxG features
+  updated Address Lookup Engine (ALE).
+  priority level Quality Of Service (QOS) support (802.1p)
+  Support for Audio/Video Bridging (P802.1Qav/D6.0)
+  Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F)
+  Flow Control (802.3x) Support
+  Time Sensitive Network Support
+  IEEE P902.3br/D2.0 Interspersing Express Traffic
+  IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic
+  Configurable number of addresses plus VLANs
+  Configurable number of classifier/policers
+  VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on
+  ingress, Auto VLAN removal on egress and auto pad to minimum frame size.
+  RX/TX csum offload
+  Management Data Input/Output (MDIO) interface for PHYs management
+  RMII/RGMII Interfaces support
+  new version of Common Platform Time Sync (CPTS)
+
+  The CPSWxG NUSS is integrated into
+    device MCU domain named MCU_CPSW0 on AM654x/J721E SoC.
+    device MAIN domain named CPSW0 on AM642x SoC.
+
+  Specifications can be found at
+    https://www.ti.com/lit/pdf/spruid7
+    https://www.ti.com/lit/zip/spruil1
+    https://www.ti.com/lit/pdf/spruim2
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    enum:
+      - ti,am642-cpsw-nuss
+      - ti,am654-cpsw-nuss
+      - ti,j7200-cpswxg-nuss
+      - ti,j721e-cpsw-nuss
+      - ti,j721e-cpswxg-nuss
+      - ti,j784s4-cpswxg-nuss
+
+  reg:
+    maxItems: 1
+    description:
+      The physical base address and size of full the CPSWxG NUSS IO range
+
+  reg-names:
+    items:
+      - const: cpsw_nuss
+
+  ranges: true
+
+  dma-coherent: true
+
+  clocks:
+    maxItems: 1
+    description: CPSWxG NUSS functional clock
+
+  clock-names:
+    items:
+      - const: fck
+
+  assigned-clock-parents: true
+
+  assigned-clocks: true
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    maxItems: 9
+
+  dma-names:
+    items:
+      - const: tx0
+      - const: tx1
+      - const: tx2
+      - const: tx3
+      - const: tx4
+      - const: tx5
+      - const: tx6
+      - const: tx7
+      - const: rx
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[1-8]$":
+        type: object
+        description: CPSWxG NUSS external ports
+
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 1
+            maximum: 8
+            description: CPSW port number
+
+          phys:
+            minItems: 1
+            items:
+              - description: CPSW MAC's PHY.
+              - description: Serdes PHY. Serdes PHY is required only if
+                             the Serdes has to be configured in the
+                             Single-Link configuration.
+
+          phy-names:
+            minItems: 1
+            items:
+              - const: mac
+              - const: serdes
+
+          label:
+            description: label associated with this port
+
+          ti,mac-only:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Specifies the port works in mac-only mode.
+
+          ti,syscon-efuse:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              - items:
+                  - description: Phandle to the system control device node which
+                      provides access to efuse
+                  - description: offset to efuse registers???
+            description:
+              Phandle to the system control device node which provides access
+              to efuse IO range with MAC addresses
+
+        required:
+          - reg
+          - phys
+
+    additionalProperties: false
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: ti,davinci-mdio.yaml#
+
+    description:
+      CPSW MDIO bus.
+
+  "^cpts@[0-9a-f]+":
+    type: object
+    $ref: ti,k3-am654-cpts.yaml#
+    description:
+      CPSW Common Platform Time Sync (CPTS) module.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - dmas
+  - dma-names
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j721e-cpswxg-nuss
+                - ti,j784s4-cpswxg-nuss
+    then:
+      properties:
+        ethernet-ports:
+          patternProperties:
+            "^port@[5-8]$": false
+            "^port@[1-4]$":
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 4
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j7200-cpswxg-nuss
+                - ti,j721e-cpswxg-nuss
+                - ti,j784s4-cpswxg-nuss
+    then:
+      properties:
+        ethernet-ports:
+          patternProperties:
+            "^port@[3-8]$": false
+            "^port@[1-2]$":
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/net/ti-dp83867.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mcu_cpsw: ethernet@46000000 {
+            compatible = "ti,am654-cpsw-nuss";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            reg = <0x0 0x46000000 0x0 0x200000>;
+            reg-names = "cpsw_nuss";
+            ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+            dma-coherent;
+            clocks = <&k3_clks 5 10>;
+            clock-names = "fck";
+            power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+
+            dmas = <&mcu_udmap 0xf000>,
+                   <&mcu_udmap 0xf001>,
+                   <&mcu_udmap 0xf002>,
+                   <&mcu_udmap 0xf003>,
+                   <&mcu_udmap 0xf004>,
+                   <&mcu_udmap 0xf005>,
+                   <&mcu_udmap 0xf006>,
+                   <&mcu_udmap 0xf007>,
+                   <&mcu_udmap 0x7000>;
+            dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+                        "rx";
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cpsw_port1: port@1 {
+                    reg = <1>;
+                    ti,mac-only;
+                    label = "port1";
+                    ti,syscon-efuse = <&mcu_conf 0x200>;
+                    phys = <&phy_gmii_sel 1>;
+
+                    phy-mode = "rgmii-rxid";
+                    phy-handle = <&phy0>;
+                };
+            };
+
+            davinci_mdio: mdio@f00 {
+                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+                reg = <0x0 0xf00 0x0 0x100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                clocks = <&k3_clks 5 10>;
+                clock-names = "fck";
+                bus_freq = <1000000>;
+
+                phy0: ethernet-phy@0 {
+                    reg = <0>;
+                    ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+                    ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+                };
+            };
+        };
+
+        cpts@3d000 {
+             compatible = "ti,am65-cpts";
+             reg = <0x0 0x3d000 0x0 0x400>;
+             clocks = <&k3_clks 18 2>;
+             clock-names = "cpts";
+             interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+             interrupt-names = "cpts";
+             ti,cpts-ext-ts-inputs = <4>;
+             ti,cpts-periodic-outputs = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
new file mode 100644
index 0000000000..3e910d3b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+  - Sekhar Nori <nsekhar@ti.com>
+
+description: |+
+  The TI AM654x/J721E CPTS module is used to facilitate host control of time
+  sync operations.
+  Main features of CPTS module are
+  - selection of multiple external clock sources
+  - Software control of time sync events via interrupt or polling
+  - 64-bit timestamp mode in ns with PPM and nudge adjustment.
+  - hardware timestamp push inputs (HWx_TS_PUSH)
+  - timestamp counter compare output (TS_COMP)
+  - timestamp counter bit output (TS_SYNC)
+  - periodic Generator function outputs (TS_GENFx)
+  - Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN)
+  - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping
+
+   Depending on integration it enables compliance with the IEEE 1588-2008
+   standard for a precision clock synchronization protocol, Ethernet Enhanced
+   Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
+   Measurement (PTM).
+
+  TI AM654x/J721E SoCs has several similar CPTS modules integrated into the
+  different parts of the system which could be synchronized with each other
+  - Main CPTS
+  - MCU CPSW CPTS with IEEE 1588-2008 support
+  - PCIe subsystem CPTS for PTM support
+
+  Depending on CPTS module integration and when CPTS is integral part of
+  another module (MCU CPSW for example) "compatible" and "reg" can
+  be omitted - parent module is fully responsible for CPTS enabling and
+  configuration.
+
+properties:
+  $nodename:
+    pattern: "^cpts@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,am65-cpts
+      - ti,j721e-cpts
+
+  reg:
+    maxItems: 1
+    description:
+      The physical base address and size of CPTS IO range
+
+  reg-names:
+    items:
+      - const: cpts
+
+  clocks:
+    maxItems: 1
+    description: CPTS reference clock
+
+  clock-names:
+    items:
+      - const: cpts
+
+  interrupts:
+    items:
+      - description: CPTS events interrupt
+
+  interrupt-names:
+    items:
+      - const: cpts
+
+  assigned-clock-parents: true
+
+  assigned-clocks: true
+
+  power-domains:
+    maxItems: 1
+
+  ti,cpts-ext-ts-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+    description:
+      Number of hardware timestamp push inputs (HWx_TS_PUSH)
+
+  ti,cpts-periodic-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+    description:
+      Number of timestamp Generator function outputs (TS_GENFx)
+
+  ti,pps:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      The pair of HWx_TS_PUSH input and TS_GENFy output indexes used for
+      PPS events generation. Platform/board specific.
+
+  refclk-mux:
+    type: object
+    additionalProperties: false
+    description: CPTS reference clock multiplexer clock
+    properties:
+      '#clock-cells':
+        const: 0
+
+      clocks:
+        maxItems: 8
+
+    required:
+      - clocks
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpts@310d0000 {
+         compatible = "ti,am65-cpts";
+         reg = <0x310d0000 0x400>;
+         reg-names = "cpts";
+         clocks = <&main_cpts_mux>;
+         clock-names = "cpts";
+         interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
+         interrupt-names = "cpts";
+         ti,cpts-periodic-outputs = <6>;
+         ti,cpts-ext-ts-inputs = <8>;
+
+         main_cpts_mux: refclk-mux {
+               #clock-cells = <0>;
+               clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+                        <&k3_clks 157 91>, <&k3_clks 157 77>,
+                        <&k3_clks 157 102>, <&k3_clks 157 80>,
+                        <&k3_clks 120 3>, <&k3_clks 121 3>;
+               assigned-clocks = <&main_cpts_mux>;
+               assigned-clock-parents = <&k3_clks 118 11>;
+         };
+    };
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
new file mode 100644
index 0000000000..052f636158
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti DWMAC Ethernet controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - toshiba,visconti-dwmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - toshiba,visconti-dwmac
+          - const: snps,dwmac-4.20a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: main clock
+      - description: PHY reference clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: phy_ref_clk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        piether: ethernet@28000000 {
+            compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a";
+            reg = <0 0x28000000 0 0x10000>;
+            interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq";
+            clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
+            clock-names = "stmmaceth", "phy_ref_clk";
+            snps,txpbl = <4>;
+            snps,rxpbl = <4>;
+            snps,tso;
+            phy-mode = "rgmii-id";
+            phy-handle = <&phy0>;
+
+            mdio {
+                #address-cells = <0x1>;
+                #size-cells = <0x0>;
+                compatible = "snps,dwmac-mdio";
+
+                phy0: ethernet-phy@1 {
+                    device_type = "ethernet-phy";
+                    reg = <0x1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
new file mode 100644
index 0000000000..4158673f72
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Vertexcom MSE102x (SPI)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@chargebyte.com>
+
+description:
+  Vertexcom's MSE102x are a family of HomePlug GreenPHY chips.
+  They can be connected either via RGMII, RMII or SPI to a host CPU.
+
+  In order to use a MSE102x chip as SPI device, it must be defined as
+  a child of an SPI master device in the device tree.
+
+  More information can be found at
+    http://www.vertexcom.com/doc/MSE1022%20Product%20Brief.pdf
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vertexcom,mse1021
+      - vertexcom,mse1022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    minimum: 6000000
+    maximum: 7142857
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "vertexcom,mse1021";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <7142857>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/via-rhine.txt b/Documentation/devicetree/bindings/net/via-rhine.txt
new file mode 100644
index 0000000000..334eca2bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/via-rhine.txt
@@ -0,0 +1,17 @@
+* VIA Rhine 10/100 Network Controller
+
+Required properties:
+- compatible : Should be "via,vt8500-rhine" for integrated
+	Rhine controllers found in VIA VT8500, WonderMedia WM8950
+	and similar. These are listed as 1106:3106 rev. 0x84 on the
+	virtual PCI bus under vendor-provided kernels
+- reg : Address and length of the io space
+- interrupts : Should contain the controller interrupt line
+
+Examples:
+
+ethernet@d8004000 {
+	compatible = "via,vt8500-rhine";
+	reg = <0xd8004000 0x100>;
+	interrupts = <10>;
+};
diff --git a/Documentation/devicetree/bindings/net/via-velocity.txt b/Documentation/devicetree/bindings/net/via-velocity.txt
new file mode 100644
index 0000000000..b3db469b1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/via-velocity.txt
@@ -0,0 +1,20 @@
+* VIA Velocity 10/100/1000 Network Controller
+
+Required properties:
+- compatible : Should be "via,velocity-vt6110"
+- reg : Address and length of the io space
+- interrupts : Should contain the controller interrupt line
+
+Optional properties:
+- no-eeprom : PCI network cards use an external EEPROM to store data. Embedded
+	devices quite often set this data in uboot and do not provide an eeprom.
+	Specify this option if you have no external eeprom.
+
+Examples:
+
+eth0@d8004000 {
+	compatible = "via,velocity-vt6110";
+	reg = <0xd8004000 0x400>;
+	interrupts = <10>;
+	no-eeprom;
+};
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
new file mode 100644
index 0000000000..4aa521f1be
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
+
+maintainers:
+  - Arend van Spriel <arend@broadcom.com>
+
+description:
+  The Broadcom Single chip MAC part for the BCM4329 family and
+  later Cypress chips in the same family named CYW4373 and similar.
+  These chips also have a Bluetooth portion described in a separate
+  binding.
+
+allOf:
+  - $ref: ieee80211.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm43143-fmac
+              - brcm,bcm4341b0-fmac
+              - brcm,bcm4341b4-fmac
+              - brcm,bcm4341b5-fmac
+              - brcm,bcm4329-fmac
+              - brcm,bcm4330-fmac
+              - brcm,bcm4334-fmac
+              - brcm,bcm43340-fmac
+              - brcm,bcm4335-fmac
+              - brcm,bcm43362-fmac
+              - brcm,bcm4339-fmac
+              - brcm,bcm43430a0-fmac
+              - brcm,bcm43430a1-fmac
+              - brcm,bcm43455-fmac
+              - brcm,bcm43456-fmac
+              - brcm,bcm4354-fmac
+              - brcm,bcm4356-fmac
+              - brcm,bcm4359-fmac
+              - brcm,bcm4366-fmac
+              - cypress,cyw4373-fmac
+              - cypress,cyw43012-fmac
+          - const: brcm,bcm4329-fmac
+      - enum:
+          - brcm,bcm4329-fmac
+          - pci14e4,43dc  # BCM4355
+          - pci14e4,4464  # BCM4364
+          - pci14e4,4488  # BCM4377
+          - pci14e4,4425  # BCM4378
+          - pci14e4,4433  # BCM4387
+
+  reg:
+    description: SDIO function number for the device (for most cases
+      this will be 1) or PCI device identifier.
+
+  interrupts:
+    maxItems: 1
+    description: Out-of-band (OOB) IRQ line for waking up the host
+      in response to WLAN activity. This corresponds to the HOST_WAKE
+      line into the chip.
+
+  interrupt-names:
+    description: Name for the OOB IRQ, this must be set to "host-wake".
+    const: host-wake
+
+  brcm,drive-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Drive strength used for the SDIO pins on the device in mA.
+    minimum: 0
+    maximum: 32
+
+  reset-gpios:
+    maxItems: 1
+    description: A GPIO line connected to the WL_RST line, if present
+      this shall be flagged as active low.
+
+  brcm,ccode-map:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Multiple strings for translating ISO3166 country code to
+      brcmfmac firmware country code and revision.
+    items:
+      pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
+
+  brcm,ccode-map-trivial:
+    description: |
+      Use a trivial mapping of ISO3166 country codes to brcmfmac firmware
+      country code and revision: cc -> { cc, 0 }. In other words, assume that
+      the CLM blob firmware uses ISO3166 country codes as well, and that all
+      revisions are zero. This property is mutually exclusive with
+      brcm,ccode-map. If both properties are specified, then brcm,ccode-map
+      takes precedence.
+    type: boolean
+
+  brcm,cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Wi-Fi radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device if present.
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Overrides the board type, which is normally the compatible of
+      the root node. This can be used to decouple the overall system board or
+      device name from the board type for WiFi purposes, which is used to
+      construct firmware and NVRAM configuration filenames, allowing for
+      multiple devices that share the same module or characteristics for the
+      WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms,
+      this should be the Apple module-instance codename prefixed by "apple,",
+      e.g. "apple,honshu".
+
+  apple,antenna-sku:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Antenna SKU used to identify a specific antenna configuration
+      on Apple platforms. This is use to build firmware filenames, to allow
+      platforms with different antenna configs to have different firmware and/or
+      NVRAM. This would normally be filled in by the bootloader from platform
+      configuration data.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    mmc@80118000 {
+      compatible = "arm,pl18x", "arm,primecell";
+      reg = <0x80118000 0x1000>;
+      clocks = <&clk 0>, <&clk 1>;
+      clock-names = "mclk", "apb_pclk";
+      interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+      bus-width = <4>;
+      non-removable;
+      vmmc-supply = <&wl_bt_reg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wifi@1 {
+        compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+        reg = <1>;
+        interrupt-parent = <&gpio>;
+        interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "host-wake";
+        reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+        brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
new file mode 100644
index 0000000000..0ea84d6fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Espressif ESP8089
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+
+properties:
+  compatible:
+    const: esp,esp8089
+
+  reg:
+    maxItems: 1
+
+  esp,crystal-26M-en:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Value for the crystal_26M_en firmware parameter
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "esp,esp8089";
+            reg = <1>;
+            esp,crystal-26M-en = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
new file mode 100644
index 0000000000..d89f7a3f88
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common IEEE 802.11
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description: |
+  This provides documentation of common properties that are valid for
+  all wireless devices
+
+properties:
+  ieee80211-freq-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+    description:
+      List of supported frequency ranges in KHz. This can be used for devices
+      that in a given config support less channels than normally. It may happen
+      chipset supports a wide wireless band but it is limited to some part of
+      it due to used antennas or power amplifier. An example case for this
+      can be tri-band wireless router with two identical chipsets used for two
+      different 5 GHz subbands. Using them incorrectly could not work or
+      decrease performance noticeably
+
+additionalProperties: true
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        reg = <0x0000 0 0 0 0>;
+        ieee80211-freq-limit = <2402000 2482000>,
+                               <5170000 5250000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
new file mode 100644
index 0000000000..cdc303caf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -0,0 +1,70 @@
+Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
+------
+
+This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
+The node is expected to be specified as a child node to the SDIO/PCIE controller that
+connects the device to the system.
+
+Required properties:
+
+  - compatible : should be one of the following:
+	* "marvell,sd8787"
+	* "marvell,sd8897"
+	* "marvell,sd8978"
+	* "marvell,sd8997"
+	* "nxp,iw416"
+	* "pci11ab,2b42"
+	* "pci1b4b,2b42"
+
+Optional properties:
+
+  - marvell,caldata* : A series of properties with marvell,caldata prefix,
+		      represent calibration data downloaded to the device during
+		      initialization. This is an array of unsigned 8-bit values.
+		      the properties should follow below property name and
+		      corresponding array length:
+	"marvell,caldata-txpwrlimit-2g" (length = 566).
+	"marvell,caldata-txpwrlimit-5g-sub0" (length = 502).
+	"marvell,caldata-txpwrlimit-5g-sub1" (length = 688).
+	"marvell,caldata-txpwrlimit-5g-sub2" (length = 750).
+	"marvell,caldata-txpwrlimit-5g-sub3" (length = 502).
+  - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
+		      to firmware. Firmware will wakeup the host using this pin
+		      during suspend/resume.
+  - interrupts : interrupt pin number to the cpu. driver will request an irq based on
+		 this interrupt number. during system suspend, the irq will be enabled
+		 so that the wifi chip can wakeup host platform under certain condition.
+		 during system resume, the irq will be disabled to make sure
+		 unnecessary interrupt is not received.
+  - vmmc-supply: a phandle of a regulator, supplying VCC to the card
+  - mmc-pwrseq:  phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+		 for documentation of MMC power sequence bindings.
+
+Example:
+
+Tx power limit calibration data is configured in below example.
+The calibration data is an array of unsigned values, the length
+can vary between hw versions.
+IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
+so that firmware can wakeup host using this device side pin.
+
+&mmc3 {
+	vmmc-supply = <&wlan_en_reg>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mwifiex: wifi@1 {
+		compatible = "marvell,sd8897";
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+
+		marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 <
+	0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>;
+		marvell,wakeup-pin = <3>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
new file mode 100644
index 0000000000..252207adbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -0,0 +1,301 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt76 wireless devices
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Ryder Lee <ryder.lee@mediatek.com>
+
+description: |
+  This node provides properties for configuring the MediaTek mt76xx
+  wireless device. The node is expected to be specified as a child
+  node of the PCI controller to which the wireless chip is connected.
+  Alternatively, it can specify the wireless part of the MT7628/MT7688
+  or MT7622/MT7986 SoC.
+
+allOf:
+  - $ref: ieee80211.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt76
+      - mediatek,mt7628-wmac
+      - mediatek,mt7622-wmac
+      - mediatek,mt7981-wmac
+      - mediatek,mt7986-wmac
+
+  reg:
+    minItems: 1
+    maxItems: 3
+    description:
+      MT7986 should contain 3 regions consys, dcm, and sku, in this order.
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Specify the consys reset for mt7986.
+
+  reset-names:
+    const: consys
+
+  clocks:
+    maxItems: 2
+    description:
+      Specify the consys clocks for mt7986.
+
+  clock-names:
+    items:
+      - const: mcu
+      - const: ap2conn
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the infrastructure bus fabric syscon node.
+      This property is MT7622 specific
+
+  ieee80211-freq-limit: true
+
+  nvmem-cells:
+    items:
+      - description: NVMEM cell with EEPROM
+
+  nvmem-cell-names:
+    items:
+      - const: eeprom
+
+  mediatek,eeprom-data:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      EEPROM data embedded as array.
+
+  mediatek,mtd-eeprom:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to MTD partition
+          - description: offset containing EEPROM data
+    description:
+      Phandle to a MTD partition + offset containing EEPROM data
+    deprecated: true
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Specify if the radio eeprom partition is written in big-endian
+
+  mediatek,eeprom-merge-otp:
+    type: boolean
+    description:
+      Merge EEPROM data with OTP data. Can be used on boards where the flash
+      calibration data is generic and specific calibration data should be
+      pulled from the OTP ROM
+
+  mediatek,disable-radar-background:
+    type: boolean
+    description:
+      Disable/enable radar/CAC detection running on a dedicated offchannel
+      chain available on some hw.
+      Background radar/CAC detection allows to avoid the CAC downtime
+      switching on a different channel during CAC detection on the selected
+      radar channel.
+
+  led:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    additionalProperties: false
+    properties:
+      led-active-low:
+        description:
+          LED is enabled with ground signal.
+        type: boolean
+
+      led-sources:
+        maxItems: 1
+
+  power-limits:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^r[0-9]+":
+        type: object
+        additionalProperties: false
+        properties:
+          regdomain:
+            $ref: /schemas/types.yaml#/definitions/string
+            description:
+              Regdomain refers to a legal regulatory region. Different
+              countries define different levels of allowable transmitter
+              power, time that a channel can be occupied, and different
+              available channels
+            enum:
+              - FCC
+              - ETSI
+              - JP
+
+        patternProperties:
+          "^txpower-[256]g$":
+            type: object
+            additionalProperties: false
+            patternProperties:
+              "^b[0-9]+$":
+                type: object
+                additionalProperties: false
+                properties:
+                  channels:
+                    $ref: /schemas/types.yaml#/definitions/uint32-array
+                    minItems: 2
+                    maxItems: 2
+                    description:
+                      Pairs of first and last channel number of the selected
+                      band
+
+                  rates-cck:
+                    $ref: /schemas/types.yaml#/definitions/uint8-array
+                    minItems: 4
+                    maxItems: 4
+                    description:
+                      4 half-dBm per-rate power limit values
+
+                  rates-ofdm:
+                    $ref: /schemas/types.yaml#/definitions/uint8-array
+                    minItems: 8
+                    maxItems: 8
+                    description:
+                      8 half-dBm per-rate power limit values
+
+                  rates-mcs:
+                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+                    description:
+                      Sets of per-rate power limit values for 802.11n/802.11ac
+                      rates for multiple channel bandwidth settings.
+                      Each set starts with the number of channel bandwidth
+                      settings for which the rate set applies, followed by
+                      either 8 or 10 power limit values. The order of the
+                      channel bandwidth settings is 20, 40, 80 and 160 MHz.
+                    maxItems: 4
+                    items:
+                      minItems: 9
+                      maxItems: 11
+
+                  rates-ru:
+                    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+                    description:
+                      Sets of per-rate power limit values for 802.11ax rates
+                      for multiple channel bandwidth or resource unit settings.
+                      Each set starts with the number of channel bandwidth or
+                      resource unit settings for which the rate set applies,
+                      followed by 12 power limit values. The order of the
+                      channel resource unit settings is RU26, RU52, RU106,
+                      RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160.
+                    items:
+                      minItems: 13
+                      maxItems: 13
+
+                  txs-delta:
+                    $ref: /schemas/types.yaml#/definitions/uint32-array
+                    description:
+                      Half-dBm power delta for different numbers of antennas
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        compatible = "mediatek,mt76";
+        reg = <0x0000 0 0 0 0>;
+        ieee80211-freq-limit = <5000000 6000000>;
+        mediatek,mtd-eeprom = <&factory 0x8000>;
+        big-endian;
+
+        led {
+          led-sources = <2>;
+        };
+
+        power-limits {
+          r0 {
+            regdomain = "FCC";
+            txpower-5g {
+               b0 {
+                   channels = <36 48>;
+                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
+                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
+                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
+                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+               };
+               b1 {
+                   channels = <100 181>;
+                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
+                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
+                   txs-delta = <12 9 6>;
+                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+               };
+             };
+          };
+        };
+      };
+    };
+
+  - |
+    wifi@10300000 {
+      compatible = "mediatek,mt7628-wmac";
+      reg = <0x10300000 0x100000>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <6>;
+
+      nvmem-cells = <&eeprom>;
+      nvmem-cell-names = "eeprom";
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    wifi@18000000 {
+      compatible = "mediatek,mt7622-wmac";
+      reg = <0x10300000 0x100000>;
+      interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+      mediatek,infracfg = <&infracfg>;
+
+      power-domains = <&scpsys 3>;
+    };
+
+  - |
+    wifi@18000000 {
+        compatible = "mediatek,mt7986-wmac";
+        resets = <&watchdog 23>;
+        reset-names = "consys";
+        reg = <0x18000000 0x1000000>,
+              <0x10003000 0x1000>,
+              <0x11d10000 0x1000>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&topckgen 50>,
+                 <&topckgen 62>;
+        clock-names = "mcu", "ap2conn";
+        memory-region = <&wmcpu_emi>;
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
new file mode 100644
index 0000000000..2460ccc082
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless
+
+maintainers:
+  - Adham Abozaeid <adham.abozaeid@microchip.com>
+  - Ajay Singh <ajay.kathat@microchip.com>
+
+description:
+  The wilc1000 chips can be connected via SPI or SDIO. This document
+  describes the binding to connect wilc devices.
+
+properties:
+  compatible:
+    const: microchip,wilc1000
+
+  reg: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: phandle to the clock connected on rtc clock line.
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+  enable-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the ENABLE line.  If specified, reset-gpios
+      must be specified as well as otherwise the driver cannot
+      ensure the timing required between asserting ENABLE
+      and deasserting RESET.  This should be declared as an
+      active-high signal.
+
+  reset-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the RESET line.  This should be declared as an
+      active-low signal.
+
+required:
+  - compatible
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      wifi@0 {
+        compatible = "microchip,wilc1000";
+        spi-max-frequency = <48000000>;
+        reg = <0>;
+        interrupt-parent = <&pioC>;
+        interrupts = <27 0>;
+        clocks = <&pck1>;
+        clock-names = "rtc";
+        enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+  - |
+    mmc {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+      non-removable;
+      vmmc-supply = <&vcc_mmc1_reg>;
+      vqmmc-supply = <&vcc_3v3_reg>;
+      bus-width = <4>;
+      wifi@0 {
+        compatible = "microchip,wilc1000";
+        reg = <0>;
+        interrupt-parent = <&pioC>;
+        interrupts = <27 0>;
+        clocks = <&pck1>;
+        clock-names = "rtc";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
new file mode 100644
index 0000000000..0e5412cff2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ath9k wireless devices
+
+maintainers:
+  - Toke Høiland-Jørgensen <toke@toke.dk>
+
+description: |
+  This node provides properties for configuring the ath9k wireless device.
+  The node is expected to be specified as a child node of the PCI controller
+  to which the wireless chip is connected.
+
+allOf:
+  - $ref: ieee80211.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci168c,0023  # AR5416
+      - pci168c,0024  # AR5418
+      - pci168c,0027  # AR9160
+      - pci168c,0029  # AR9220 and AR9223
+      - pci168c,002a  # AR9280 and AR9283
+      - pci168c,002b  # AR9285
+      - pci168c,002c  # AR2427 - 802.11n bonded out
+      - pci168c,002d  # AR9227
+      - pci168c,002e  # AR9287
+      - pci168c,0030  # AR9380, AR9381 and AR9382
+      - pci168c,0032  # AR9485
+      - pci168c,0033  # AR9580 and AR9590
+      - pci168c,0034  # AR9462
+      - pci168c,0036  # AR9565
+      - pci168c,0037  # AR1111 and AR9485
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ieee80211-freq-limit: true
+
+  qca,no-eeprom:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that there is no physical EEPROM connected
+
+  nvmem-cells:
+    items:
+      - description: Reference to an nvmem node for the MAC address
+      - description: Reference to an nvmem node for calibration data
+
+  nvmem-cell-names:
+    items:
+      - const: mac-address
+      - const: calibration
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        compatible = "pci168c,002d";
+        reg = <0 0 0 0 0>;
+        interrupts = <3>;
+        qca,no-eeprom;
+      };
+    };
+  - |
+    pci0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,11 {
+        compatible = "pci168c,0029";
+        reg = <0x8800 0 0 0 0>;
+        nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>;
+        nvmem-cell-names = "mac-address", "calibration";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
new file mode 100644
index 0000000000..7758a55dd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -0,0 +1,362 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath10k wireless devices
+
+maintainers:
+  - Kalle Valo <kvalo@kernel.org>
+
+description:
+  Qualcomm Technologies, Inc. IEEE 802.11ac devices.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ath10k # SDIO-based devices
+      - qcom,ipq4019-wifi
+      - qcom,wcn3990-wifi # SNoC-based devices
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: membase
+
+  interrupts:
+    minItems: 12
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 12
+    maxItems: 17
+
+  memory-region:
+    maxItems: 1
+    description:
+      Reference to the MSA memory region used by the Wi-Fi firmware
+      running on the Q6 core.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  resets:
+    maxItems: 6
+
+  reset-names:
+    items:
+      - const: wifi_cpu_init
+      - const: wifi_radio_srif
+      - const: wifi_radio_warm
+      - const: wifi_radio_cold
+      - const: wifi_core_warm
+      - const: wifi_core_cold
+
+  ext-fem-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Name of external front end module used.
+    enum:
+      - microsemi-lx5586
+      - sky85703-11
+      - sky85803
+
+  wifi-firmware:
+    type: object
+    additionalProperties: false
+    description: |
+      The ath10k Wi-Fi node can contain one optional firmware subnode.
+      Firmware subnode is needed when the platform does not have Trustzone.
+    properties:
+      iommus:
+        maxItems: 1
+    required:
+      - iommus
+
+  ieee80211-freq-limit: true
+
+  qcom,ath10k-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Calibration data + board-specific data as a byte array. The length
+      can vary between hardware versions.
+
+  qcom,ath10k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Unique variant identifier of the calibration data in board-2.bin
+      for designs with colliding bus and device specific ids
+
+  qcom,ath10k-pre-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Pre-calibration data as a byte array. The length can vary between
+      hardware versions.
+
+  qcom,coexist-support:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1]
+    description:
+      Indicate coex support by the hardware.
+
+  qcom,coexist-gpio-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      COEX GPIO number provided to the Wi-Fi firmware.
+
+  qcom,msa-fixed-perm:
+    type: boolean
+    description:
+      Whether to skip executing an SCM call that reassigns the memory
+      region ownership.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the WLAN Q6.
+    items:
+      - description: Signal bits used to enable/disable low power mode
+                     on WCN in the case of WoW (Wake on Wireless).
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output.
+    items:
+      - const: wlan-smp2p-out
+
+  qcom,snoc-host-cap-8bit-quirk:
+    type: boolean
+    description:
+      Quirk specifying that the firmware expects the 8bit version
+      of the host capability QMI request
+
+  qcom,xo-cal-data:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      XO cal offset to be configured in XO trim register.
+
+  vdd-0.8-cx-mx-supply:
+    description: Main logic power rail
+
+  vdd-1.8-xo-supply:
+    description: Crystal oscillator supply
+
+  vdd-1.3-rfa-supply:
+    description: RFA supply
+
+  vdd-3.3-ch0-supply:
+    description: Primary Wi-Fi antenna supply
+
+  vdd-3.3-ch1-supply:
+    description: Secondary Wi-Fi antenna supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - $ref: ieee80211.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-wifi
+    then:
+      properties:
+        interrupts:
+          minItems: 17
+          maxItems: 17
+
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+            - const: msi4
+            - const: msi5
+            - const: msi6
+            - const: msi7
+            - const: msi8
+            - const: msi9
+            - const: msi10
+            - const: msi11
+            - const: msi12
+            - const: msi13
+            - const: msi14
+            - const: msi15
+            - const: legacy
+
+        clocks:
+          items:
+            - description: Wi-Fi command clock
+            - description: Wi-Fi reference clock
+            - description: Wi-Fi RTC clock
+
+        clock-names:
+          items:
+            - const: wifi_wcss_cmd
+            - const: wifi_wcss_ref
+            - const: wifi_wcss_rtc
+
+      required:
+        - clocks
+        - clock-names
+        - interrupts
+        - interrupt-names
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3990-wifi
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: XO reference clock
+            - description: Qualcomm Debug Subsystem clock
+
+        clock-names:
+          minItems: 1
+          items:
+            - const: cxo_ref_clk_pin
+            - const: qdss
+
+        interrupts:
+          items:
+            - description: CE0
+            - description: CE1
+            - description: CE2
+            - description: CE3
+            - description: CE4
+            - description: CE5
+            - description: CE6
+            - description: CE7
+            - description: CE8
+            - description: CE9
+            - description: CE10
+            - description: CE11
+
+        interrupt-names: false
+
+      required:
+        - interrupts
+
+examples:
+  # SNoC
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    wifi@18800000 {
+      compatible = "qcom,wcn3990-wifi";
+      reg = <0x18800000 0x800000>;
+      reg-names = "membase";
+      memory-region = <&wlan_msa_mem>;
+      clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+      clock-names = "cxo_ref_clk_pin";
+      interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+      iommus = <&anoc2_smmu 0x1900>,
+               <&anoc2_smmu 0x1901>;
+      qcom,snoc-host-cap-8bit-quirk;
+      vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+      vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+      vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+      vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+      vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+      wifi-firmware {
+        iommus = <&apps_smmu 0x1c02 0x1>;
+      };
+    };
+
+  # AHB
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+    wifi@a000000 {
+        compatible = "qcom,ipq4019-wifi";
+        reg = <0xa000000 0x200000>;
+        resets = <&gcc WIFI0_CPU_INIT_RESET>,
+                 <&gcc WIFI0_RADIO_SRIF_RESET>,
+                 <&gcc WIFI0_RADIO_WARM_RESET>,
+                 <&gcc WIFI0_RADIO_COLD_RESET>,
+                 <&gcc WIFI0_CORE_WARM_RESET>,
+                 <&gcc WIFI0_CORE_COLD_RESET>;
+        reset-names = "wifi_cpu_init",
+                      "wifi_radio_srif",
+                      "wifi_radio_warm",
+                      "wifi_radio_cold",
+                      "wifi_core_warm",
+                      "wifi_core_cold";
+        clocks = <&gcc GCC_WCSS2G_CLK>,
+                 <&gcc GCC_WCSS2G_REF_CLK>,
+                 <&gcc GCC_WCSS2G_RTC_CLK>;
+        clock-names = "wifi_wcss_cmd",
+                      "wifi_wcss_ref",
+                      "wifi_wcss_rtc";
+        interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names =  "msi0",
+                           "msi1",
+                           "msi2",
+                           "msi3",
+                           "msi4",
+                           "msi5",
+                           "msi6",
+                           "msi7",
+                           "msi8",
+                           "msi9",
+                           "msi10",
+                           "msi11",
+                           "msi12",
+                           "msi13",
+                           "msi14",
+                           "msi15",
+                           "legacy";
+        ieee80211-freq-limit = <5470000 5875000>;
+      };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
new file mode 100644
index 0000000000..817f02a8b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Linaro Limited
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices (PCIe)
+
+maintainers:
+  - Kalle Valo <kvalo@kernel.org>
+
+description: |
+  Qualcomm Technologies IEEE 802.11ax PCIe devices
+
+properties:
+  compatible:
+    enum:
+      - pci17cb,1103  # WCN6855
+
+  reg:
+    maxItems: 1
+
+  qcom,ath11k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      string to uniquely identify variant of the calibration data for designs
+      with colliding bus and device ids
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie {
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        pcie@0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+
+            bus-range = <0x01 0xff>;
+
+            wifi@0 {
+                compatible = "pci17cb,1103";
+                reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+                qcom,ath11k-calibration-variant = "LE_X13S";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 0000000000..7d5f982a3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,468 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices
+
+maintainers:
+  - Kalle Valo <kvalo@kernel.org>
+
+description: |
+  These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
+  devices, for example like AHB based IPQ8074.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq8074-wifi
+      - qcom,ipq6018-wifi
+      - qcom,wcn6750-wifi
+      - qcom,ipq5018-wifi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 32
+    maxItems: 52
+
+  interrupt-names:
+    maxItems: 52
+
+  qcom,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      DT entry of q6v5-wcss remoteproc driver.
+      Phandle to a node that can contain the following properties
+        * compatible
+        * reg
+        * reg-names
+
+  qcom,ath11k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      string to uniquely identify variant of the calibration data in the
+      board-2.bin for designs with colliding bus and device specific ids
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  wifi-firmware:
+    type: object
+    description: |
+      WCN6750 wifi node can contain one optional firmware subnode.
+      Firmware subnode is needed when the platform does not have Trustzone.
+    required:
+      - iommus
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the WLAN Q6.
+    items:
+      - description: Signal bits used to enable/disable low power mode
+                     on WCN6750 in the case of WoW (Wake on Wireless).
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output.
+    items:
+      - const: wlan-smp2p-out
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - qcom,rproc
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: misc-pulse1 interrupt events
+            - description: misc-latch interrupt events
+            - description: sw exception interrupt events
+            - description: watchdog interrupt events
+            - description: interrupt event for ring CE0
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring CE11
+            - description: interrupt event for ring host2wbm-desc-feed
+            - description: interrupt event for ring host2reo-re-injection
+            - description: interrupt event for ring host2reo-command
+            - description: interrupt event for ring host2rxdma-monitor-ring3
+            - description: interrupt event for ring host2rxdma-monitor-ring2
+            - description: interrupt event for ring host2rxdma-monitor-ring1
+            - description: interrupt event for ring reo2ost-exception
+            - description: interrupt event for ring wbm2host-rx-release
+            - description: interrupt event for ring reo2host-status
+            - description: interrupt event for ring reo2host-destination-ring4
+            - description: interrupt event for ring reo2host-destination-ring3
+            - description: interrupt event for ring reo2host-destination-ring2
+            - description: interrupt event for ring reo2host-destination-ring1
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+            - description: interrupt event for ring ppdu-end-interrupts-mac3
+            - description: interrupt event for ring ppdu-end-interrupts-mac2
+            - description: interrupt event for ring ppdu-end-interrupts-mac1
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+            - description: interrupt event for ring rxdma2host-destination-ring-mac3
+            - description: interrupt event for ring rxdma2host-destination-ring-mac2
+            - description: interrupt event for ring rxdma2host-destination-ring-mac1
+            - description: interrupt event for ring host2tcl-input-ring4
+            - description: interrupt event for ring host2tcl-input-ring3
+            - description: interrupt event for ring host2tcl-input-ring2
+            - description: interrupt event for ring host2tcl-input-ring1
+            - description: interrupt event for ring wbm2host-tx-completions-ring3
+            - description: interrupt event for ring wbm2host-tx-completions-ring2
+            - description: interrupt event for ring wbm2host-tx-completions-ring1
+            - description: interrupt event for ring tcl2host-status-ring
+        interrupt-names:
+          items:
+            - const: misc-pulse1
+            - const: misc-latch
+            - const: sw-exception
+            - const: watchdog
+            - const: ce0
+            - const: ce1
+            - const: ce2
+            - const: ce3
+            - const: ce4
+            - const: ce5
+            - const: ce6
+            - const: ce7
+            - const: ce8
+            - const: ce9
+            - const: ce10
+            - const: ce11
+            - const: host2wbm-desc-feed
+            - const: host2reo-re-injection
+            - const: host2reo-command
+            - const: host2rxdma-monitor-ring3
+            - const: host2rxdma-monitor-ring2
+            - const: host2rxdma-monitor-ring1
+            - const: reo2ost-exception
+            - const: wbm2host-rx-release
+            - const: reo2host-status
+            - const: reo2host-destination-ring4
+            - const: reo2host-destination-ring3
+            - const: reo2host-destination-ring2
+            - const: reo2host-destination-ring1
+            - const: rxdma2host-monitor-destination-mac3
+            - const: rxdma2host-monitor-destination-mac2
+            - const: rxdma2host-monitor-destination-mac1
+            - const: ppdu-end-interrupts-mac3
+            - const: ppdu-end-interrupts-mac2
+            - const: ppdu-end-interrupts-mac1
+            - const: rxdma2host-monitor-status-ring-mac3
+            - const: rxdma2host-monitor-status-ring-mac2
+            - const: rxdma2host-monitor-status-ring-mac1
+            - const: host2rxdma-host-buf-ring-mac3
+            - const: host2rxdma-host-buf-ring-mac2
+            - const: host2rxdma-host-buf-ring-mac1
+            - const: rxdma2host-destination-ring-mac3
+            - const: rxdma2host-destination-ring-mac2
+            - const: rxdma2host-destination-ring-mac1
+            - const: host2tcl-input-ring4
+            - const: host2tcl-input-ring3
+            - const: host2tcl-input-ring2
+            - const: host2tcl-input-ring1
+            - const: wbm2host-tx-completions-ring3
+            - const: wbm2host-tx-completions-ring2
+            - const: wbm2host-tx-completions-ring1
+            - const: tcl2host-status-ring
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring DP1
+            - description: interrupt event for ring DP2
+            - description: interrupt event for ring DP3
+            - description: interrupt event for ring DP4
+            - description: interrupt event for ring DP5
+            - description: interrupt event for ring DP6
+            - description: interrupt event for ring DP7
+            - description: interrupt event for ring DP8
+            - description: interrupt event for ring DP9
+            - description: interrupt event for ring DP10
+            - description: interrupt event for ring DP11
+            - description: interrupt event for ring DP12
+            - description: interrupt event for ring DP13
+            - description: interrupt event for ring DP14
+            - description: interrupt event for ring DP15
+            - description: interrupt event for ring DP16
+            - description: interrupt event for ring DP17
+            - description: interrupt event for ring DP18
+            - description: interrupt event for ring DP19
+            - description: interrupt event for ring DP20
+            - description: interrupt event for ring DP21
+            - description: interrupt event for ring DP22
+
+examples:
+  - |
+
+    q6v5_wcss: remoteproc@cd00000 {
+        compatible = "qcom,ipq8074-wcss-pil";
+        reg = <0xcd00000 0x4040>,
+              <0x4ab000 0x20>;
+        reg-names = "qdsp6",
+                    "rmb";
+    };
+
+    wifi0: wifi@c000000 {
+        compatible = "qcom,ipq8074-wifi";
+        reg = <0xc000000 0x2000000>;
+        interrupts = <0 320 1>,
+                     <0 319 1>,
+                     <0 318 1>,
+                     <0 317 1>,
+                     <0 316 1>,
+                     <0 315 1>,
+                     <0 314 1>,
+                     <0 311 1>,
+                     <0 310 1>,
+                     <0 411 1>,
+                     <0 410 1>,
+                     <0 40 1>,
+                     <0 39 1>,
+                     <0 302 1>,
+                     <0 301 1>,
+                     <0 37 1>,
+                     <0 36 1>,
+                     <0 296 1>,
+                     <0 295 1>,
+                     <0 294 1>,
+                     <0 293 1>,
+                     <0 292 1>,
+                     <0 291 1>,
+                     <0 290 1>,
+                     <0 289 1>,
+                     <0 288 1>,
+                     <0 239 1>,
+                     <0 236 1>,
+                     <0 235 1>,
+                     <0 234 1>,
+                     <0 233 1>,
+                     <0 232 1>,
+                     <0 231 1>,
+                     <0 230 1>,
+                     <0 229 1>,
+                     <0 228 1>,
+                     <0 224 1>,
+                     <0 223 1>,
+                     <0 203 1>,
+                     <0 183 1>,
+                     <0 180 1>,
+                     <0 179 1>,
+                     <0 178 1>,
+                     <0 177 1>,
+                     <0 176 1>,
+                     <0 163 1>,
+                     <0 162 1>,
+                     <0 160 1>,
+                     <0 159 1>,
+                     <0 158 1>,
+                     <0 157 1>,
+                     <0 156 1>;
+        interrupt-names = "misc-pulse1",
+                          "misc-latch",
+                          "sw-exception",
+                          "watchdog",
+                          "ce0",
+                          "ce1",
+                          "ce2",
+                          "ce3",
+                          "ce4",
+                          "ce5",
+                          "ce6",
+                          "ce7",
+                          "ce8",
+                          "ce9",
+                          "ce10",
+                          "ce11",
+                          "host2wbm-desc-feed",
+                          "host2reo-re-injection",
+                          "host2reo-command",
+                          "host2rxdma-monitor-ring3",
+                          "host2rxdma-monitor-ring2",
+                          "host2rxdma-monitor-ring1",
+                          "reo2ost-exception",
+                          "wbm2host-rx-release",
+                          "reo2host-status",
+                          "reo2host-destination-ring4",
+                          "reo2host-destination-ring3",
+                          "reo2host-destination-ring2",
+                          "reo2host-destination-ring1",
+                          "rxdma2host-monitor-destination-mac3",
+                          "rxdma2host-monitor-destination-mac2",
+                          "rxdma2host-monitor-destination-mac1",
+                          "ppdu-end-interrupts-mac3",
+                          "ppdu-end-interrupts-mac2",
+                          "ppdu-end-interrupts-mac1",
+                          "rxdma2host-monitor-status-ring-mac3",
+                          "rxdma2host-monitor-status-ring-mac2",
+                          "rxdma2host-monitor-status-ring-mac1",
+                          "host2rxdma-host-buf-ring-mac3",
+                          "host2rxdma-host-buf-ring-mac2",
+                          "host2rxdma-host-buf-ring-mac1",
+                          "rxdma2host-destination-ring-mac3",
+                          "rxdma2host-destination-ring-mac2",
+                          "rxdma2host-destination-ring-mac1",
+                          "host2tcl-input-ring4",
+                          "host2tcl-input-ring3",
+                          "host2tcl-input-ring2",
+                          "host2tcl-input-ring1",
+                          "wbm2host-tx-completions-ring3",
+                          "wbm2host-tx-completions-ring2",
+                          "wbm2host-tx-completions-ring1",
+                          "tcl2host-status-ring";
+        qcom,rproc = <&q6v5_wcss>;
+    };
+
+  - |
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qcn9074_0: wifi@51100000 {
+            no-map;
+            reg = <0x0 0x51100000 0x0 0x03500000>;
+        };
+    };
+
+    pci {
+        pcie0 {
+            #size-cells = <2>;
+            #address-cells = <3>;
+
+            wifi_0: wifi@0 {
+                reg = <0 0 0 0 0>;
+                memory-region = <&qcn9074_0>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wlan_ce_mem: memory@4cd000 {
+            no-map;
+            reg = <0x0 0x004cd000 0x0 0x1000>;
+        };
+
+        wlan_fw_mem: memory@80c00000 {
+            no-map;
+            reg = <0x0 0x80c00000 0x0 0xc00000>;
+        };
+    };
+
+    wifi: wifi@17a10040 {
+        compatible = "qcom,wcn6750-wifi";
+        reg = <0x17a10040 0x0>;
+        iommus = <&apps_smmu 0x1c00 0x1>;
+        interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+        qcom,rproc = <&remoteproc_wpss>;
+        memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+        qcom,smem-states = <&wlan_smp2p_out 0>;
+        qcom,smem-state-names = "wlan-smp2p-out";
+        wifi-firmware {
+            iommus = <&apps_smmu 0x1c02 0x1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
new file mode 100644
index 0000000000..84e5659e50
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020, Silicon Laboratories, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs WFxxx
+
+maintainers:
+  - Jérôme Pouiller <jerome.pouiller@silabs.com>
+
+description: >
+  Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device
+  from the WFxxx series is the WF200 described here:
+     https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
+
+  The WF200 can be connected via SPI or via SDIO.
+
+  For SDIO:
+
+    Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is
+    sufficient for the SDIO devices).
+
+    It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without
+    it, you may encounter issues during reboot. The mmc-pwrseq should be
+    compatible with mmc-pwrseq-simple. Please consult
+    Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
+    information.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - prt,prtt1c-wfm200 # Protonic PRTT1C Board
+          - silabs,brd4001a # WGM160P Evaluation Board
+          - silabs,brd8022a # WF200 Evaluation Board
+          - silabs,brd8023a # WFM200 Evaluation Board
+      - const: silabs,wf200 # Chip alone without antenna
+
+  reg:
+    description:
+      When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is
+      the chip select address of the device as defined in the SPI devices
+      bindings.
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
+      used, this property is required. When SDIO is used, the "in-band"
+      interrupt provided by the SDIO bus is used unless an interrupt is defined
+      in the Device Tree.
+    maxItems: 1
+
+  reset-gpios:
+    description: (SPI only) Phandle of gpio that will be used to reset chip
+      during probe. Without this property, you may encounter issues with warm
+      boot.
+
+      For SDIO, the reset gpio should declared using a mmc-pwrseq.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: Phandle of gpio that will be used to wake-up chip. Without this
+      property, driver will disable most of power saving features.
+    maxItems: 1
+
+  silabs,antenna-config-file:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Use an alternative file for antenna configuration (aka
+      "Platform Data Set" in Silabs jargon). Default depends of "compatible"
+      string. For "silabs,wf200", the default is 'wf200.pds'.
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@0 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_irq &wfx_gpios>;
+            reg = <0>;
+            interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <42000000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wfx_pwrseq: wfx_pwrseq {
+        compatible = "mmc-pwrseq-simple";
+        pinctrl-names = "default";
+        pinctrl-0 = <&wfx_reset>;
+        reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+    };
+
+    mmc {
+        mmc-pwrseq = <&wfx_pwrseq>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_wakeup>;
+            reg = <1>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
new file mode 100644
index 0000000000..88fd28d15e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -0,0 +1,64 @@
+* Texas Instruments wl1251 wireless lan controller
+
+The wl1251 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :        Should be "ti,wl1251"
+- reg :               Chip select address of device
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
+- interrupts :        Should contain interrupt line
+- vio-supply :        phandle to regulator providing VIO
+
+Optional properties:
+- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
+                         provides configuration data (calibration, MAC, ...)
+- ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
+			 SPI mode
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1251@0 {
+		compatible = "ti,wl1251";
+
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		spi-cpol;
+		spi-cpha;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+		vio-supply = <&vio>;
+		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+	};
+};
+
+&mmc3 {
+	vmmc-supply = <&wlan_en>;
+
+	bus-width = <4>;
+	non-removable;
+	ti,non-removable;
+	cap-power-off-card;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlan: wifi@1 {
+		compatible = "ti,wl1251";
+
+		reg = <1>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
+
+		ti,wl1251-has-eeprom;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
new file mode 100644
index 0000000000..75c9489f31
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ti,wlcore.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  The wl12xx/wl18xx chips can be connected via SPI or via SDIO.
+  Note that the *-clock-frequency properties assume internal clocks.  In case
+  of external clocks, new bindings (for parsing the clock nodes) have to be
+  added.
+
+properties:
+  compatible:
+    enum:
+      - ti,wl1271
+      - ti,wl1273
+      - ti,wl1281
+      - ti,wl1283
+      - ti,wl1285
+      - ti,wl1801
+      - ti,wl1805
+      - ti,wl1807
+      - ti,wl1831
+      - ti,wl1835
+      - ti,wl1837
+
+  reg:
+    maxItems: 1
+    description:
+      This is required when connected via SPI, and optional when connected via
+      SDIO.
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: irq
+      - const: wakeup
+
+  vwlan-supply:
+    description:
+      Points to the node of the regulator that powers/enable the wl12xx/wl18xx
+      chip.  This is required when connected via SPI.
+
+
+  ref-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference clock frequency.
+
+  tcxo-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TCXO clock frequency.
+
+  clock-xtal:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates that the clock is generated from XTAL.
+
+required:
+  - compatible
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,wl1271
+              - ti,wl1273
+              - ti,wl1281
+              - ti,wl1283
+    then:
+      required:
+        - ref-clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // For wl12xx family:
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore1: wlcore@1 {
+            compatible = "ti,wl1271";
+            reg = <1>;
+            spi-max-frequency = <48000000>;
+            interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+            vwlan-supply = <&vwlan_fixed>;
+            clock-xtal;
+            ref-clock-frequency = <38400000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // For wl18xx family:
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore2: wlcore@0 {
+            compatible = "ti,wl1835";
+            reg = <0>;
+            spi-max-frequency = <48000000>;
+            interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+            vwlan-supply = <&vwlan_fixed>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // SDIO example:
+    mmc3 {
+        vmmc-supply = <&wlan_en_reg>;
+        bus-width = <4>;
+        cap-power-off-card;
+        keep-power-in-suspend;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore3: wlcore@2 {
+            compatible = "ti,wl1835";
+            reg = <2>;
+            interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wiznet,w5x00.txt b/Documentation/devicetree/bindings/net/wiznet,w5x00.txt
new file mode 100644
index 0000000000..e9665798c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wiznet,w5x00.txt
@@ -0,0 +1,50 @@
+* Wiznet w5x00
+
+This is a standalone 10/100 MBit Ethernet controller with SPI interface.
+
+For each device connected to a SPI bus, define a child node within
+the SPI master node.
+
+Required properties:
+- compatible: Should be one of the following strings:
+	      "wiznet,w5100"
+	      "wiznet,w5200"
+	      "wiznet,w5500"
+- reg: Specify the SPI chip select the chip is wired to.
+- interrupts: Specify the interrupt index within the interrupt controller (referred
+              to above in interrupt-parent) and interrupt type. w5x00 natively
+              generates falling edge interrupts, however, additional board logic
+              might invert the signal.
+- pinctrl-names: List of assigned state names, see pinctrl binding documentation.
+- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line,
+             see also generic and your platform specific pinctrl binding
+             documentation.
+
+Optional properties:
+- spi-max-frequency: Maximum frequency of the SPI bus when accessing the w5500.
+  According to the w5500 datasheet, the chip allows a maximum of 80 MHz, however,
+  board designs may need to limit this value.
+- local-mac-address: See ethernet.txt in the same directory.
+
+
+Example (for Raspberry Pi with pin control stuff for GPIO irq):
+
+&spi {
+	ethernet@0: w5500@0 {
+		compatible = "wiznet,w5500";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth1_pins>;
+		interrupt-parent = <&gpio>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&gpio {
+	eth1_pins: eth1_pins {
+		brcm,pins = <25>;
+		brcm,function = <0>; /* in */
+		brcm,pull = <0>; /* none */
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
new file mode 100644
index 0000000000..1d33d80af1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,axi-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXI 1G/2.5G Ethernet Subsystem
+
+description: |
+  Also called  AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
+  provides connectivity to an external ethernet PHY supporting different
+  interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
+  segments of memory for buffering TX and RX, as well as the capability of
+  offloading TX/RX checksum calculation off the processor.
+
+  Management configuration is done through the AXI interface, while payload is
+  sent and received through means of an AXI DMA controller. This driver
+  includes the DMA driver code, so this driver is incompatible with AXI DMA
+  driver.
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,axi-ethernet-1.00.a
+      - xlnx,axi-ethernet-1.01.a
+      - xlnx,axi-ethernet-2.01.a
+
+  reg:
+    description:
+      Address and length of the IO space, as well as the address
+      and length of the AXI DMA controller IO space, unless
+      axistream-connected is specified, in which case the reg
+      attribute of the node referenced by it is used.
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Ethernet core interrupt
+      - description: Tx DMA interrupt
+      - description: Rx DMA interrupt
+    description:
+      Ethernet core interrupt is optional. If axistream-connected property is
+      present DMA node should contains TX/RX DMA interrupts else DMA interrupt
+      resources are mentioned on ethernet node.
+    minItems: 1
+
+  phy-handle: true
+
+  xlnx,rxmem:
+    description:
+      Set to allocated memory buffer for Rx/Tx in the hardware.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  phy-mode:
+    enum:
+      - mii
+      - gmii
+      - rgmii
+      - sgmii
+      - 1000BaseX
+
+  xlnx,phy-type:
+    description:
+      Do not use, but still accepted in preference to phy-mode.
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  xlnx,txcsum:
+    description:
+      TX checksum offload. 0 or empty for disabling TX checksum offload,
+      1 to enable partial TX checksum offload and 2 to enable full TX
+      checksum offload.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  xlnx,rxcsum:
+    description:
+      RX checksum offload. 0 or empty for disabling RX checksum offload,
+      1 to enable partial RX checksum offload and 2 to enable full RX
+      checksum offload.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  xlnx,switch-x-sgmii:
+    type: boolean
+    description:
+      Indicate the Ethernet core is configured to support both 1000BaseX and
+      SGMII modes. If set, the phy-mode should be set to match the mode
+      selected on core reset (i.e. by the basex_or_sgmii core input line).
+
+  clocks:
+    items:
+      - description: Clock for AXI register slave interface.
+      - description: AXI4-Stream clock for TXD RXD TXC and RXS interfaces.
+      - description: Ethernet reference clock, used by signal delay primitives
+                     and transceivers.
+      - description: MGT reference clock (used by optional internal PCS/PMA PHY)
+
+  clock-names:
+    items:
+      - const: s_axi_lite_clk
+      - const: axis_clk
+      - const: ref_clk
+      - const: mgt_clk
+
+  axistream-connected:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle of AXI DMA controller which contains the resources
+      used by this device. If this is specified, the DMA-related resources
+      from that device (DMA registers and DMA TX/RX interrupts) rather than
+      this one will be used.
+
+  mdio:
+    type: object
+
+  pcs-handle:
+    description: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+      modes, where "pcs-handle" should be used to point to the PCS/PMA PHY,
+      and "phy-handle" should point to an external PHY if exists.
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - xlnx,rxmem
+  - phy-handle
+
+allOf:
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_ethernet_eth: ethernet@40c00000 {
+        compatible = "xlnx,axi-ethernet-1.00.a";
+        interrupts = <2 0 1>;
+        clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+        clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
+        phy-mode = "mii";
+        reg = <0x40c00000 0x40000>,<0x50c00000 0x40000>;
+        xlnx,rxcsum = <0x2>;
+        xlnx,rxmem = <0x800>;
+        xlnx,txcsum = <0x2>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy0: ethernet-phy@1 {
+                device_type = "ethernet-phy";
+                reg = <1>;
+            };
+        };
+    };
+
+  - |
+    axi_ethernet_eth1: ethernet@40000000 {
+        compatible = "xlnx,axi-ethernet-1.00.a";
+        interrupts = <0>;
+        clock-names = "s_axi_lite_clk", "axis_clk", "ref_clk", "mgt_clk";
+        clocks = <&axi_clk>, <&axi_clk>, <&pl_enet_ref_clk>, <&mgt_clk>;
+        phy-mode = "mii";
+        reg = <0x00 0x40000000 0x00 0x40000>;
+        xlnx,rxcsum = <0x2>;
+        xlnx,rxmem = <0x800>;
+        xlnx,txcsum = <0x2>;
+        phy-handle = <&phy1>;
+        axistream-connected = <&dma>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                device_type = "ethernet-phy";
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
new file mode 100644
index 0000000000..92d8ade988
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,emaclite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Emaclite Ethernet controller
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+  - Harini Katakam <harini.katakam@amd.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,opb-ethernetlite-1.01.a
+      - xlnx,opb-ethernetlite-1.01.b
+      - xlnx,xps-ethernetlite-1.00.a
+      - xlnx,xps-ethernetlite-2.00.a
+      - xlnx,xps-ethernetlite-2.01.a
+      - xlnx,xps-ethernetlite-3.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-handle: true
+
+  local-mac-address: true
+
+  xlnx,tx-ping-pong:
+    type: boolean
+    description: hardware supports tx ping pong buffer.
+
+  xlnx,rx-ping-pong:
+    type: boolean
+    description: hardware supports rx ping pong buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_ethernetlite_1: ethernet@40e00000 {
+        compatible = "xlnx,xps-ethernetlite-3.00.a";
+        reg = <0x40e00000 0x10000>;
+        interrupt-parent = <&axi_intc_1>;
+        interrupts = <1>;
+        local-mac-address = [00 00 00 00 00 00];
+        phy-handle = <&phy0>;
+        xlnx,rx-ping-pong;
+        xlnx,tx-ping-pong;
+    };
diff --git a/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml
new file mode 100644
index 0000000000..0f781dac67
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,gmii-to-rgmii.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,gmii-to-rgmii.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx GMII to RGMII Converter
+
+maintainers:
+  - Harini Katakam <harini.katakam@amd.com>
+
+description:
+  The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media
+  Independent Interface (RGMII) core provides the RGMII between RGMII-compliant
+  ethernet physical media devices (PHY) and the Gigabit Ethernet controller.
+  This core can be used in all three modes of operation(10/100/1000 Mb/s).
+  The Management Data Input/Output (MDIO) interface is used to configure the
+  speed of operation. This core can switch dynamically between the three
+  different speed modes by configuring the converter register through mdio write.
+  The core cannot function without an external phy connected to it.
+
+properties:
+  compatible:
+    const: xlnx,gmii-to-rgmii-1.0
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description: The ID number for the phy.
+
+  phy-handle:
+    $ref: ethernet-controller.yaml#/properties/phy-handle
+
+required:
+  - compatible
+  - reg
+  - phy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy: ethernet-phy@0 {
+            reg = <0>;
+        };
+        gmiitorgmii@8 {
+            compatible = "xlnx,gmii-to-rgmii-1.0";
+            reg = <8>;
+            phy-handle = <&phy>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt
new file mode 100644
index 0000000000..3e9cabe667
--- /dev/null
+++ b/Documentation/devicetree/bindings/nios2/nios2.txt
@@ -0,0 +1,62 @@
+* Nios II Processor Binding
+
+This binding specifies what properties available in the device tree
+representation of a Nios II Processor Core.
+
+Users can use sopc2dts tool for generating device tree sources (dts) from a
+Qsys system. See more detail in: http://www.alterawiki.com/wiki/Sopc2dts
+
+Required properties:
+
+- compatible: Compatible property value should be "altr,nios2-1.0".
+- reg: Contains CPU index.
+- interrupt-controller: Specifies that the node is an interrupt controller
+- #interrupt-cells: Specifies the number of cells needed to encode an
+		interrupt source, should be 1.
+- clock-frequency: Contains the clock frequency for CPU, in Hz.
+- dcache-line-size: Contains data cache line size.
+- icache-line-size: Contains instruction line size.
+- dcache-size: Contains data cache size.
+- icache-size: Contains instruction cache size.
+- altr,pid-num-bits: Specifies the number of bits to use to represent the process
+		identifier (PID).
+- altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB.
+- altr,tlb-num-entries: Specifies the number of entries in the TLB.
+- altr,tlb-ptr-sz: Specifies size of TLB pointer.
+- altr,has-mul: Specifies CPU hardware multiply support, should be 1.
+- altr,has-mmu: Specifies CPU support MMU support, should be 1.
+- altr,has-initda: Specifies CPU support initda instruction, should be 1.
+- altr,reset-addr: Specifies CPU reset address
+- altr,fast-tlb-miss-addr: Specifies CPU fast TLB miss exception address
+- altr,exception-addr: Specifies CPU exception address
+
+Optional properties:
+- altr,has-div: Specifies CPU hardware divide support
+- altr,implementation: Nios II core implementation, this should be "fast";
+
+Example:
+
+cpu@0 {
+	device_type = "cpu";
+	compatible = "altr,nios2-1.0";
+	reg = <0>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	clock-frequency = <125000000>;
+	dcache-line-size = <32>;
+	icache-line-size = <32>;
+	dcache-size = <32768>;
+	icache-size = <32768>;
+	altr,implementation = "fast";
+	altr,pid-num-bits = <8>;
+	altr,tlb-num-ways = <16>;
+	altr,tlb-num-entries = <128>;
+	altr,tlb-ptr-sz = <7>;
+	altr,has-div = <1>;
+	altr,has-mul = <1>;
+	altr,reset-addr = <0xc2800000>;
+	altr,fast-tlb-miss-addr = <0xc7fff400>;
+	altr,exception-addr = <0xd0000020>;
+	altr,has-initda = <1>;
+	altr,has-mmu = <1>;
+};
diff --git a/Documentation/devicetree/bindings/numa.txt b/Documentation/devicetree/bindings/numa.txt
new file mode 100644
index 0000000000..42f282c2f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/numa.txt
@@ -0,0 +1,319 @@
+==============================================================================
+NUMA binding description.
+==============================================================================
+
+==============================================================================
+1 - Introduction
+==============================================================================
+
+Systems employing a Non Uniform Memory Access (NUMA) architecture contain
+collections of hardware resources including processors, memory, and I/O buses,
+that comprise what is commonly known as a NUMA node.
+Processor accesses to memory within the local NUMA node is generally faster
+than processor accesses to memory outside of the local NUMA node.
+DT defines interfaces that allow the platform to convey NUMA node
+topology information to OS.
+
+==============================================================================
+2 - numa-node-id
+==============================================================================
+
+For the purpose of identification, each NUMA node is associated with a unique
+token known as a node id. For the purpose of this binding
+a node id is a 32-bit integer.
+
+A device node is associated with a NUMA node by the presence of a
+numa-node-id property which contains the node id of the device.
+
+Example:
+	/* numa node 0 */
+	numa-node-id = <0>;
+
+	/* numa node 1 */
+	numa-node-id = <1>;
+
+==============================================================================
+3 - distance-map
+==============================================================================
+
+The optional device tree node distance-map describes the relative
+distance (memory latency) between all numa nodes.
+
+- compatible : Should at least contain "numa-distance-map-v1".
+
+- distance-matrix
+  This property defines a matrix to describe the relative distances
+  between all numa nodes.
+  It is represented as a list of node pairs and their relative distance.
+
+  Note:
+	1. Each entry represents distance from first node to second node.
+	The distances are equal in either direction.
+	2. The distance from a node to self (local distance) is represented
+	with value 10 and all internode distance should be represented with
+	a value greater than 10.
+	3. distance-matrix should have entries in lexicographical ascending
+	order of nodes.
+	4. There must be only one device node distance-map which must
+	reside in the root node.
+	5. If the distance-map node is not present, a default
+	distance-matrix is used.
+
+Example:
+	4 nodes connected in mesh/ring topology as below,
+
+		0_______20______1
+		|               |
+		|               |
+		20             20
+		|               |
+		|               |
+		|_______________|
+		3       20      2
+
+	if relative distance for each hop is 20,
+	then internode distance would be,
+	      0 -> 1 = 20
+	      1 -> 2 = 20
+	      2 -> 3 = 20
+	      3 -> 0 = 20
+	      0 -> 2 = 40
+	      1 -> 3 = 40
+
+     and dt presentation for this distance matrix is,
+
+		distance-map {
+			 compatible = "numa-distance-map-v1";
+			 distance-matrix = <0 0  10>,
+					   <0 1  20>,
+					   <0 2  40>,
+					   <0 3  20>,
+					   <1 0  20>,
+					   <1 1  10>,
+					   <1 2  20>,
+					   <1 3  40>,
+					   <2 0  40>,
+					   <2 1  20>,
+					   <2 2  10>,
+					   <2 3  20>,
+					   <3 0  20>,
+					   <3 1  40>,
+					   <3 2  20>,
+					   <3 3  10>;
+		};
+
+==============================================================================
+4 - Empty memory nodes
+==============================================================================
+
+Empty memory nodes, which no memory resides in, are allowed. There are no
+device nodes for these empty memory nodes. However, the NUMA node IDs and
+distance maps are still valid and memory may be added into them through
+hotplug afterwards.
+
+Example:
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+		numa-node-id = <0>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		numa-node-id = <1>;
+	};
+
+	/* Empty memory node 2 and 3 */
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0  10>,
+				  <0 1  20>,
+				  <0 2  40>,
+				  <0 3  20>,
+				  <1 0  20>,
+				  <1 1  10>,
+				  <1 2  20>,
+				  <1 3  40>,
+				  <2 0  40>,
+				  <2 1  20>,
+				  <2 2  10>,
+				  <2 3  20>,
+				  <3 0  20>,
+				  <3 1  40>,
+				  <3 2  20>,
+				  <3 3  10>;
+	};
+
+==============================================================================
+5 - Example dts
+==============================================================================
+
+Dual socket system consists of 2 boards connected through ccn bus and
+each board having one socket/soc of 8 cpus, memory and pci bus.
+
+	memory@c00000 {
+		device_type = "memory";
+		reg = <0x0 0xc00000 0x0 0x80000000>;
+		/* node 0 */
+		numa-node-id = <0>;
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0x0 0x0 0x80000000>;
+		/* node 1 */
+		numa-node-id = <1>;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			/* node 0 */
+			numa-node-id = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x4>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x5>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@6 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x6>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@7 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x7>;
+			enable-method = "psci";
+			numa-node-id = <0>;
+		};
+		cpu@8 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x8>;
+			enable-method = "psci";
+			/* node 1 */
+			numa-node-id = <1>;
+		};
+		cpu@9 {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0x9>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+		cpu@a {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0xa>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+		cpu@b {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0xb>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+		cpu@c {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0xc>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+		cpu@d {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0xd>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+		cpu@e {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0xe>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+		cpu@f {
+			device_type = "cpu";
+			compatible =  "arm,armv8";
+			reg = <0x0 0xf>;
+			enable-method = "psci";
+			numa-node-id = <1>;
+		};
+	};
+
+	pcie0: pcie0@848000000000 {
+		compatible = "arm,armv8";
+		device_type = "pci";
+		bus-range = <0 255>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x8480 0x00000000 0 0x10000000>;  /* Configuration space */
+		ranges = <0x03000000 0x8010 0x00000000 0x8010 0x00000000 0x70 0x00000000>;
+		/* node 0 */
+		numa-node-id = <0>;
+        };
+
+	pcie1: pcie1@948000000000 {
+		compatible = "arm,armv8";
+		device_type = "pci";
+		bus-range = <0 255>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x9480 0x00000000 0 0x10000000>;  /* Configuration space */
+		ranges = <0x03000000 0x9010 0x00000000 0x9010 0x00000000 0x70 0x00000000>;
+		/* node 1 */
+		numa-node-id = <1>;
+        };
+
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0 10>,
+				  <0 1 20>,
+				  <1 1 10>;
+	};
diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
new file mode 100644
index 0000000000..fc6555724e
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ANS NVM Express host controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-nvme-ans2
+          - apple,t8112-nvme-ans2
+          - apple,t6000-nvme-ans2
+      - const: apple,nvme-ans2
+
+  reg:
+    items:
+      - description: NVMe and NVMMU registers
+      - description: ANS2 co-processor control registers
+
+  reg-names:
+    items:
+      - const: nvme
+      - const: ans
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    # two domains for t8103, three for t6000
+    minItems: 2
+    items:
+      - description: power domain for the NVMe controller.
+      - description: power domain for the first PCIe bus connecting the NVMe
+          controller to the storage modules.
+      - description: optional power domain for the second PCIe bus
+          connecting the NVMe controller to the storage modules.
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: ans
+      - const: apcie0
+      - const: apcie1
+
+  mboxes:
+    maxItems: 1
+    description: Mailbox of the ANS2 co-processor
+
+  interrupts:
+    maxItems: 1
+
+  apple,sart:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to the SART address filter.
+
+      The SART address filter is documented in iommu/apple,sart.yaml.
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - apple,t8103-nvme-ans2
+          - apple,t8112-nvme-ans2
+then:
+  properties:
+    power-domains:
+      maxItems: 2
+    power-domain-names:
+      maxItems: 2
+else:
+  properties:
+    power-domains:
+      minItems: 3
+    power-domain-names:
+      minItems: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - power-domains
+  - power-domain-names
+  - mboxes
+  - interrupts
+  - apple,sart
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    nvme@7bcc0000 {
+      compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+      reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>;
+      reg-names = "nvme", "ans";
+      interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+      mboxes = <&ans>;
+      apple,sart = <&sart>;
+      power-domains = <&ps_ans2>, <&ps_apcie_st>;
+      power-domain-names = "ans", "apcie0";
+      resets = <&ps_ans2>;
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
new file mode 100644
index 0000000000..296001e7f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Security ID
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-sid
+      - const: allwinner,sun7i-a20-sid
+      - const: allwinner,sun8i-a83t-sid
+      - const: allwinner,sun8i-h3-sid
+      - const: allwinner,sun20i-d1-sid
+      - const: allwinner,sun50i-a64-sid
+      - items:
+          - const: allwinner,sun50i-a100-sid
+          - const: allwinner,sun50i-a64-sid
+      - const: allwinner,sun50i-h5-sid
+      - const: allwinner,sun50i-h6-sid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@1c23800 {
+        compatible = "allwinner,sun4i-a10-sid";
+        reg = <0x01c23800 0x10>;
+    };
+
+  - |
+    efuse@1c23800 {
+        compatible = "allwinner,sun7i-a20-sid";
+        reg = <0x01c23800 0x200>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
new file mode 100644
index 0000000000..e49c2754ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/amlogic,meson-gxbb-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GX eFuse
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gxbb-efuse
+      - items:
+          - const: amlogic,meson-gx-efuse
+          - const: amlogic,meson-gxbb-efuse
+
+  clocks:
+    maxItems: 1
+
+  secure-monitor:
+    description: phandle to the secure-monitor node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - clocks
+  - secure-monitor
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse: efuse {
+        compatible = "amlogic,meson-gxbb-efuse";
+        clocks = <&clk_efuse>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        secure-monitor = <&sm>;
+
+        sn: sn@14 {
+            reg = <0x14 0x10>;
+        };
+
+        eth_mac: mac@34 {
+            reg = <0x34 0x10>;
+        };
+
+        bid: bid@46 {
+            reg = <0x46 0x30>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
new file mode 100644
index 0000000000..84b3dfd21e
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/amlogic,meson6-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 eFuse
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-efuse
+      - amlogic,meson8-efuse
+      - amlogic,meson8b-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse: efuse@0 {
+        compatible = "amlogic,meson6-efuse";
+        reg = <0x0 0x2000>;
+        clocks = <&clk_efuse>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ethernet_mac_address: mac@1b4 {
+            reg = <0x1b4 0x6>;
+        };
+
+        temperature_calib: calib@1f4 {
+             reg = <0x1f4 0x4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
new file mode 100644
index 0000000000..e0860b6b85
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/apple,efuses.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC eFuse-based NVMEM
+
+description: |
+  Apple SoCs such as the M1 contain factory-programmed eFuses used to e.g. store
+  calibration data for the PCIe and the Type-C PHY or unique chip identifiers
+  such as the ECID.
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-efuses
+          - apple,t6000-efuses
+      - const: apple,efuses
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@3d2bc000 {
+        compatible = "apple,t8103-efuses", "apple,efuses";
+        reg = <0x3d2bc000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ecid: efuse@500 {
+            reg = <0x500 0x8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
new file mode 100644
index 0000000000..13412af7f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/brcm,nvram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's NVRAM
+
+description: |
+  Broadcom's NVRAM is a structure containing device specific environment
+  variables. It is used for storing device configuration, booting parameters
+  and calibration data.
+
+  NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
+  devices usiong I/O mapped memory.
+
+  NVRAM variables can be defined as NVMEM device subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: brcm,nvram
+
+  reg:
+    maxItems: 1
+
+  board_id:
+    type: object
+    description: Board identification name
+
+  et0macaddr:
+    type: object
+    description: First Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
+
+  et1macaddr:
+    type: object
+    description: Second Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
+
+  et2macaddr:
+    type: object
+    description: Third Ethernet interface's MAC address
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nvram@1eff0000 {
+        compatible = "brcm,nvram";
+        reg = <0x1eff0000 0x10000>;
+
+        mac: et0macaddr {
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
new file mode 100644
index 0000000000..0415265c21
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt
@@ -0,0 +1,17 @@
+Broadcom OTP memory controller
+
+Required Properties:
+- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used
+  in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second
+  generation Broadcom OTPC which is used in SoC's such as Stingray and supports
+  64-bit read/write.
+- reg: Base address of the OTP controller.
+- brcm,ocotp-size: Amount of memory available, in 32 bit words
+
+Example:
+
+otp: otp@301c800 {
+	compatible = "brcm,ocotp";
+	reg = <0x0301c800 0x2c>;
+	brcm,ocotp-size = <2048>;
+};
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
new file mode 100644
index 0000000000..70fb2ad251
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,layerscape-sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Security Fuse Processor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  SFP is the security fuse processor which among other things provides a
+  unique identifier per part.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Trust architecture 2.1 SFP
+        items:
+          - const: fsl,ls1021a-sfp
+      - description: Trust architecture 3.0 SFP
+        items:
+          - const: fsl,ls1028a-sfp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      The SFP clock. Typically, this is the platform clock divided by 4.
+
+  clock-names:
+    const: sfp
+
+  ta-prog-sfp-supply:
+    description:
+      The regulator for the TA_PROG_SFP pin. It will be enabled for programming
+      and disabled for reading.
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+    efuse@1e80000 {
+        compatible = "fsl,ls1028a-sfp";
+        reg = <0x1e80000 0x8000>;
+        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+                            QORIQ_CLK_PLL_DIV(4)>;
+        clock-names = "sfp";
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
new file mode 100644
index 0000000000..f0a4928364
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - OCOTP Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-scu-ocotp
+      - fsl,imx8qxp-scu-ocotp
+
+patternProperties:
+  '^mac@[0-9a-f]*$':
+    type: object
+    description:
+      MAC address.
+
+    properties:
+      reg:
+        description:
+          Byte offset within OCOTP where the MAC address is stored
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ocotp {
+        compatible = "fsl,imx8qxp-scu-ocotp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fec_mac0: mac@2c4 {
+            reg = <0x2c4 6>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,t1023-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,t1023-sfp.yaml
new file mode 100644
index 0000000000..df826b40d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,t1023-sfp.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,t1023-sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP QorIQ eFuse support
+
+maintainers:
+  - Richard Alpe <richard@bit42.se>
+
+description:
+  Read support for the eFuses (SFP) on NXP QorIQ series SoC's.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: fsl,t1023-sfp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@e8000 {
+        compatible = "fsl,t1023-sfp";
+        reg = <0xe8000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
new file mode 100644
index 0000000000..e9d9d8df48
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX IC Identification Module (IIM)
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  This binding represents the IC Identification Module (IIM) found on
+  i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx25-iim
+      - fsl,imx27-iim
+      - fsl,imx31-iim
+      - fsl,imx35-iim
+      - fsl,imx51-iim
+      - fsl,imx53-iim
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    iim: efuse@63f98000 {
+        compatible = "fsl,imx53-iim";
+        reg = <0x63f98000 0x4000>;
+        interrupts = <69>;
+        clocks = <&clks IMX5_CLK_IIM_GATE>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
new file mode 100644
index 0000000000..99e60d713d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX On-Chip OTP Controller (OCOTP)
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  This binding represents the on-chip eFuse OTP controller found on
+  i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
+  i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93 SoCs.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-ocotp
+              - fsl,imx6sl-ocotp
+              - fsl,imx6sx-ocotp
+              - fsl,imx6ul-ocotp
+              - fsl,imx6ull-ocotp
+              - fsl,imx7d-ocotp
+              - fsl,imx6sll-ocotp
+              - fsl,imx7ulp-ocotp
+              - fsl,imx8mq-ocotp
+              - fsl,imx8mm-ocotp
+              - fsl,imx93-ocotp
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx8mn-ocotp
+              # i.MX8MP not really compatible with fsl,imx8mm-ocotp, however
+              # the code for getting SoC revision depends on fsl,imx8mm-ocotp
+              # compatible.
+              - fsl,imx8mp-ocotp
+          - const: fsl,imx8mm-ocotp
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+
+    ocotp: efuse@21bc000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "fsl,imx6sx-ocotp", "syscon";
+        reg = <0x021bc000 0x4000>;
+        clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+        cpu_speed_grade: speed-grade@10 {
+            reg = <0x10 4>;
+        };
+
+        tempmon_calib: calib@38 {
+            reg = <0x38 4>;
+        };
+
+        tempmon_temp_grade: temp-grade@20 {
+            reg = <0x20 4>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
new file mode 100644
index 0000000000..e89fd879c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ EFUSE driver
+
+maintainers:
+  - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # Handle for the ahb for the efuse.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    efuse@134100d0 {
+        compatible = "ingenic,jz4780-efuse";
+        reg = <0x134100d0 0x2c>;
+
+        clocks = <&cgu JZ4780_CLK_AHB2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
new file mode 100644
index 0000000000..ac2381e660
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/fixed-cell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed offset & size NVMEM cell
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mac-base
+        description: >
+          Cell with base MAC address to be used for calculating extra relative
+          addresses.
+          It can be stored in a plain binary format (cell length 6) or as an
+          ASCII text like "00:11:22:33:44:55" (cell length 17).
+
+  reg:
+    maxItems: 1
+
+  bits:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - minimum: 0
+        maximum: 7
+        description:
+          Offset in bit within the address range specified by reg.
+      - minimum: 1
+        description:
+          Size in bit within the address range specified by reg.
+
+allOf:
+  - if:
+      required: [ compatible ]
+    then:
+      if:
+        properties:
+          compatible:
+            contains:
+              const: mac-base
+      then:
+        properties:
+          "#nvmem-cell-cells":
+            description: The first argument is a MAC address offset.
+            const: 1
+        required:
+          - "#nvmem-cell-cells"
+
+required:
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
new file mode 100644
index 0000000000..9bd34bd5af
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/fixed-layout.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/fixed-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout for fixed NVMEM cells
+
+description:
+  Many NVMEM devices have hardcoded cells layout (offset and size of defined
+  NVMEM content doesn't change).
+
+  This binding allows defining such NVMEM layout with its cells. It can be used
+  on top of any NVMEM device.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: fixed-layout
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+    $ref: fixed-cell.yaml
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    nvmem-layout {
+        compatible = "fixed-layout";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mac@100 {
+            compatible = "mac-base";
+            reg = <0x100 0x6>;
+            #nvmem-cell-cells = <1>;
+        };
+
+        mac@110 {
+            compatible = "mac-base";
+            reg = <0x110 0x11>;
+            #nvmem-cell-cells = <1>;
+        };
+
+        calibration@4000 {
+            reg = <0x4000 0x100>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
new file mode 100644
index 0000000000..c713e23819
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/kontron,sl28-vpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the Kontron SMARC-sAL28 vital product data
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The vital product data (VPD) of the sl28 boards contains a serial
+  number and a base MAC address. The actual MAC addresses for the
+  on-board ethernet devices are derived from this base MAC address by
+  adding an offset.
+
+select: false
+
+properties:
+  compatible:
+    const: kontron,sl28-vpd
+
+  serial-number:
+    type: object
+    description: The board's serial number
+
+    additionalProperties: false
+
+  base-mac-address:
+    type: object
+    description:
+      Base MAC address for all on-module network interfaces. The first
+      argument of the phandle will be treated as an offset.
+
+    properties:
+      "#nvmem-cell-cells":
+        const: 1
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+      otp-1 {
+          compatible = "user-otp";
+
+          nvmem-layout {
+              compatible = "kontron,sl28-vpd";
+
+              serial_number: serial-number {
+              };
+
+              base_mac_address: base-mac-address {
+                  #nvmem-cell-cells = <1>;
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
new file mode 100644
index 0000000000..3b40f78807
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/nvmem-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory) layouts
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Michael Walle <michael@walle.cc>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  Most NVMEM layouts are static and thus do not require additional description
+  besides the bytes/bits offset and length. Other layouts can be less statically
+  define and might require dynamic reading of the NVMEM device in order to
+  perform their parsing. The nvmem-layout container is here to describe these.
+
+oneOf:
+  - $ref: fixed-layout.yaml
+  - $ref: kontron,sl28-vpd.yaml
+  - $ref: onie,tlv-layout.yaml
+
+properties:
+  compatible: true
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml
new file mode 100644
index 0000000000..ee8ac32233
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/onie,tlv-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the ONIE tlv table
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description:
+  Modern networking hardware implementing the Open Compute Project ONIE
+  infrastructure shall provide a non-volatile memory with a table whose the
+  content is well specified and gives many information about the manufacturer
+  (name, country of manufacture, etc) as well as device caracteristics (serial
+  number, hardware version, mac addresses, etc). The underlying device type
+  (flash, EEPROM,...) is not specified. The exact location of each value is also
+  dynamic and should be discovered at run time because it depends on the
+  parameters the manufacturer decided to embed.
+
+select: false
+
+properties:
+  compatible:
+    const: onie,tlv-layout
+
+  product-name:
+    type: object
+    additionalProperties: false
+
+  part-number:
+    type: object
+    additionalProperties: false
+
+  serial-number:
+    type: object
+    additionalProperties: false
+
+  mac-address:
+    type: object
+    description:
+      Base MAC address for all on-module network interfaces. The first
+      argument of the phandle will be treated as an offset.
+
+    properties:
+      "#nvmem-cell-cells":
+        const: 1
+
+    additionalProperties: false
+
+  manufacture-date:
+    type: object
+    additionalProperties: false
+
+  device-version:
+    type: object
+    additionalProperties: false
+
+  label-revision:
+    type: object
+    additionalProperties: false
+
+  platform-name:
+    type: object
+    additionalProperties: false
+
+  onie-version:
+    type: object
+    additionalProperties: false
+
+  num-macs:
+    type: object
+    additionalProperties: false
+
+  manufacturer:
+    type: object
+    additionalProperties: false
+
+  country-code:
+    type: object
+    additionalProperties: false
+
+  vendor:
+    type: object
+    additionalProperties: false
+
+  diag-version:
+    type: object
+    additionalProperties: false
+
+  service-tag:
+    type: object
+    additionalProperties: false
+
+  vendor-extension:
+    type: object
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@56 {
+            compatible = "atmel,24c64";
+            read-only;
+            reg = <0x56>;
+
+            nvmem-layout {
+                compatible = "onie,tlv-layout";
+
+                serial-number {
+                };
+            };
+        };
+    };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "m25p80", "jedec,spi-nor";
+            reg = <0>;
+
+            otp {
+                compatible = "user-otp";
+
+                nvmem-layout {
+                    compatible = "onie,tlv-layout";
+
+                    mac-address {
+                        #nvmem-cell-cells = <1>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt b/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt
new file mode 100644
index 0000000000..853b6a7546
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/lpc1850-otp.txt
@@ -0,0 +1,20 @@
+* NXP LPC18xx OTP memory
+
+Internal OTP (One Time Programmable) memory for NXP LPC18xx/43xx devices.
+
+Required properties:
+  - compatible: Should be "nxp,lpc1850-otp"
+  - reg: Must contain an entry with the physical base address and length
+    for each entry in reg-names.
+  - address-cells: must be set to 1.
+  - size-cells: must be set to 1.
+
+See nvmem.txt for more information.
+
+Example:
+  otp: otp@40045000 {
+    compatible = "nxp,lpc1850-otp";
+    reg = <0x40045000 0x1000>;
+    #address-cells = <1>;
+    #size-cells = <1>;
+  };
diff --git a/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt
new file mode 100644
index 0000000000..809df68f6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt
@@ -0,0 +1,28 @@
+* NXP LPC18xx EEPROM memory NVMEM driver
+
+Required properties:
+  - compatible: Should be "nxp,lpc1857-eeprom"
+  - reg: Must contain an entry with the physical base address and length
+    for each entry in reg-names.
+  - reg-names: Must include the following entries.
+    - reg: EEPROM registers.
+    - mem: EEPROM address space.
+  - clocks: Must contain an entry for each entry in clock-names.
+  - clock-names: Must include the following entries.
+    - eeprom: EEPROM operating clock.
+  - resets: Should contain a reference to the reset controller asserting
+    the EEPROM in reset.
+  - interrupts: Should contain EEPROM interrupt.
+
+Example:
+
+  eeprom: eeprom@4000e000 {
+    compatible = "nxp,lpc1857-eeprom";
+    reg = <0x4000e000 0x1000>,
+          <0x20040000 0x4000>;
+    reg-names = "reg", "mem";
+    clocks = <&ccu1 CLK_CPU_EEPROM>;
+    clock-names = "eeprom";
+    resets = <&rgu 27>;
+    interrupts = <4>;
+  };
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
new file mode 100644
index 0000000000..7ec2988b59
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek efuse
+
+description: |
+  MediaTek's efuse is used for storing calibration data, it can be accessed
+  on ARM devices usiong I/O mapped memory.
+
+maintainers:
+  - Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+  - Lala Lin <lala.lin@mediatek.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  $nodename:
+    pattern: "^efuse@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7622-efuse
+              - mediatek,mt7623-efuse
+              - mediatek,mt7986-efuse
+              - mediatek,mt8173-efuse
+              - mediatek,mt8183-efuse
+              - mediatek,mt8186-efuse
+              - mediatek,mt8188-efuse
+              - mediatek,mt8192-efuse
+              - mediatek,mt8195-efuse
+              - mediatek,mt8516-efuse
+          - const: mediatek,efuse
+      - const: mediatek,mt8173-efuse
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@11c10000 {
+        compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+        reg = <0x11c10000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        u3_tx_imp_p0: usb3-tx-imp@184,1 {
+            reg = <0x184 0x1>;
+            bits = <0 5>;
+        };
+        u3_rx_imp_p0: usb3-rx-imp@184,2 {
+            reg = <0x184 0x2>;
+            bits = <5 5>;
+        };
+        u3_intr_p0: usb3-intr@185 {
+            reg = <0x185 0x1>;
+            bits = <2 6>;
+        };
+        comb_tx_imp_p1: usb3-tx-imp@186,1 {
+            reg = <0x186 0x1>;
+            bits = <0 5>;
+        };
+        comb_rx_imp_p1: usb3-rx-imp@186,2 {
+            reg = <0x186 0x2>;
+            bits = <5 5>;
+        };
+        comb_intr_p1: usb3-intr@187 {
+            reg = <0x187 0x1>;
+            bits = <2 6>;
+        };
+        u2_intr_p0: usb2-intr-p0@188,1 {
+            reg = <0x188 0x1>;
+            bits = <0 5>;
+        };
+        u2_intr_p1: usb2-intr-p1@188,2 {
+            reg = <0x188 0x2>;
+            bits = <5 5>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
new file mode 100644
index 0000000000..f97c6beb47
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN9662 OTP Controller (OTPC)
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. hardware configuration settings, chip identifiers) or
+  user specific data could be stored.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,lan9668-otpc
+          - const: microchip,lan9662-otpc
+      - enum:
+          - microchip,lan9662-otpc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otpc: otp@e0021000 {
+        compatible = "microchip,lan9662-otpc";
+        reg = <0xe0021000 0x300>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
new file mode 100644
index 0000000000..a296d348ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,sama7g5-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAMA7G5 OTP Controller (OTPC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. calibration data for analog cells, hardware configuration
+  settings, chip identifiers) or user specific data could be stored.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sama7g5-otpc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+
+    otpc: efuse@e8c00000 {
+        compatible = "microchip,sama7g5-otpc", "syscon";
+        reg = <0xe8c00000 0xec>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        temperature_calib: calib@1 {
+            reg = <OTP_PKT(1) 76>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
new file mode 100644
index 0000000000..e436650f0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Freescale i.MX23/i.MX28
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx23-ocotp
+          - fsl,imx28-ocotp
+      - const: fsl,ocotp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ocotp: efuse@8002c000 {
+        compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x8002c000 0x2000>;
+        clocks = <&clks 25>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
new file mode 100644
index 0000000000..6c26800f8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nintendo-otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nintendo Wii and Wii U OTP
+
+description: |
+  This binding represents the OTP memory as found on a Nintendo Wii or Wii U,
+  which contains common and per-console keys, signatures and related data
+  required to access peripherals.
+
+  See https://wiiubrew.org/wiki/Hardware/OTP
+
+maintainers:
+  - Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nintendo,hollywood-otp
+      - nintendo,latte-otp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp@d8001ec {
+        compatible = "nintendo,latte-otp";
+        reg = <0x0d8001ec 0x8>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
new file mode 100644
index 0000000000..a26633bf52
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
+
+title: NVMEM (Non Volatile Memory) Consumer
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+select: true
+
+properties:
+  nvmem:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of phandle to the nvmem providers.
+
+  nvmem-cells:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of phandle to the nvmem data cells.
+
+  nvmem-names:
+    description:
+      Names for the each nvmem provider.
+
+  nvmem-cell-names:
+    description:
+      Names for each nvmem-cells specified.
+
+dependencies:
+  nvmem-names: [ nvmem ]
+  nvmem-cell-names: [ nvmem-cells ]
+
+additionalProperties: true
+
+examples:
+  - |
+    tsens {
+        /* ... */
+        nvmem-cells = <&tsens_calibration>;
+        nvmem-cell-names = "calibration";
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt
new file mode 100644
index 0000000000..46a7ef485e
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt
@@ -0,0 +1 @@
+This file has been moved to nvmem.yaml and nvmem-consumer.yaml.
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
new file mode 100644
index 0000000000..9f921d9401
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory)
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding is intended to represent the location of hardware
+  configuration data stored in NVMEMs like eeprom, efuses and so on.
+
+  On a significant proportion of boards, the manufacturer has stored
+  some data on NVMEM, for the OS to be able to retrieve these
+  information and act upon it. Obviously, the OS has to know about
+  where to retrieve these data from, and where they are stored on the
+  storage device.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  read-only:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Mark the provider as read only.
+
+  wp-gpios:
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+      The write-protect GPIO is asserted, when it's driven high
+      (logical '1') to block the write operation. It's deasserted,
+      when it's driven low (logical '0') to allow writing.
+    maxItems: 1
+
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+    description:
+      Alternative to the statically defined nvmem cells, this
+      container may reference more advanced (dynamic) layout
+      parsers.
+
+patternProperties:
+  "@[0-9a-f]+(,[0-7])?$":
+    type: object
+    allOf:
+      - $ref: layouts/fixed-cell.yaml
+      - properties:
+          compatible: false
+    deprecated: true
+
+additionalProperties: true
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      qfprom: eeprom@700000 {
+          compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          reg = <0x00700000 0x100000>;
+
+          wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+
+          /* ... */
+
+          nvmem-layout {
+              compatible = "fixed-layout";
+              #address-cells = <1>;
+              #size-cells = <1>;
+
+              /* Data cells */
+              tsens_calibration: calib@404 {
+                  reg = <0x404 0x10>;
+              };
+
+              tsens_calibration_bckp: calib_bckp@504 {
+                  reg = <0x504 0x11>;
+                  bits = <6 128>;
+              };
+
+              pvs_version: pvs-version@6 {
+                  reg = <0x6 0x2>;
+                  bits = <7 2>;
+              };
+
+              speed_bin: speed-bin@c{
+                  reg = <0xc 0x1>;
+                  bits = <2 3>;
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
new file mode 100644
index 0000000000..8740938c32
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc, QFPROM Efuse
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-qfprom
+          - qcom,apq8084-qfprom
+          - qcom,ipq5332-qfprom
+          - qcom,ipq6018-qfprom
+          - qcom,ipq8064-qfprom
+          - qcom,ipq8074-qfprom
+          - qcom,ipq9574-qfprom
+          - qcom,msm8226-qfprom
+          - qcom,msm8916-qfprom
+          - qcom,msm8974-qfprom
+          - qcom,msm8976-qfprom
+          - qcom,msm8996-qfprom
+          - qcom,msm8998-qfprom
+          - qcom,qcm2290-qfprom
+          - qcom,qcs404-qfprom
+          - qcom,sc7180-qfprom
+          - qcom,sc7280-qfprom
+          - qcom,sdm630-qfprom
+          - qcom,sdm670-qfprom
+          - qcom,sdm845-qfprom
+          - qcom,sm6115-qfprom
+          - qcom,sm6350-qfprom
+          - qcom,sm6375-qfprom
+          - qcom,sm8150-qfprom
+          - qcom,sm8250-qfprom
+      - const: qcom,qfprom
+
+  reg:
+    # If the QFPROM is read-only OS image then only the corrected region
+    # needs to be provided.  If the QFPROM is writable then all 4 regions
+    # must be provided.
+    oneOf:
+      - items:
+          - description: The corrected region.
+      - items:
+          - description: The corrected region.
+          - description: The raw region.
+          - description: The config region.
+          - description: The security control region.
+
+  # Clock must be provided if QFPROM is writable from the OS image.
+  clocks:
+    maxItems: 1
+  clock-names:
+    const: core
+
+  # Supply reference must be provided if QFPROM is writable from the OS image.
+  vcc-supply:
+    description: Our power supply.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@784000 {
+        compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
+        reg = <0 0x00784000 0 0x8ff>,
+              <0 0x00780000 0 0x7a0>,
+              <0 0x00782000 0 0x100>,
+              <0 0x00786000 0 0x1fff>;
+        clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        vcc-supply = <&vreg_l11a_1p8>;
+
+        hstx-trim-primary@25b {
+          reg = <0x25b 0x1>;
+          bits = <1 3>;
+        };
+      };
+    };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@784000 {
+        compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
+        reg = <0 0x00784000 0 0x8ff>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        hstx-trim-primary@1eb {
+          reg = <0x1eb 0x1>;
+          bits = <1 4>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
new file mode 100644
index 0000000000..9b133f783d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qcom,sec-qfprom.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,sec-qfprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc, Secure QFPROM Efuse
+
+maintainers:
+  - Komal Bajaj <quic_kbajaj@quicinc.com>
+
+description:
+  For some of the Qualcomm SoC's, it is possible that the qfprom region is
+  protected from non-secure access. In such situations, the OS have to use
+  secure calls to read the region.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qdu1000-sec-qfprom
+      - const: qcom,sec-qfprom
+
+  reg:
+    items:
+      - description: The secure qfprom corrected region.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      efuse@221c8000 {
+        compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
+        reg = <0 0x221c8000 0 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        multi_chan_ddr: multi-chan-ddr@12b {
+          reg = <0x12b 0x1>;
+          bits = <0 2>;
+        };
+      };
+    };
+
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
new file mode 100644
index 0000000000..cd980def97
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,spmi-sdam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SPMI SDAM
+
+maintainers:
+  - Shyam Kumar Thella <sthella@codeaurora.org>
+
+description: |
+  The SDAM provides scratch register space for the PMIC clients. This
+  memory can be used by software to store information or communicate
+  to/from the PBUS.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,spmi-sdam
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sdam_1: nvram@b000 {
+            compatible = "qcom,spmi-sdam";
+            reg = <0xb000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0xb000 0x100>;
+
+            /* Data cells */
+            restart_reason: restart@50 {
+                reg = <0x50 0x1>;
+                bits = <6 2>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
new file mode 100644
index 0000000000..1ec0d09bca
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reserved Memory Based nvmem Device
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - raspberrypi,bootloader-config
+          - raspberrypi,bootloader-public-key
+      - const: nvmem-rmem
+
+  reg:
+    maxItems: 1
+
+  no-map:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Avoid creating a virtual mapping of the region as part of the OS'
+      standard mapping of system memory.
+
+required:
+  - compatible
+  - no-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+        reserved-memory {
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                blconfig: nvram@10000000 {
+                        compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x10000000 0x1000>;
+                        no-map;
+                };
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
new file mode 100644
index 0000000000..9c6eff7889
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip,otp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip internal OTP (One Time Programmable) memory
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-otp
+      - rockchip,rk3308-otp
+      - rockchip,rk3588-otp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: otp
+      - const: apb_pclk
+      - const: phy
+      - const: arb
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: nvmem.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-otp
+              - rockchip,rk3308-otp
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-otp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: otp
+            - const: apb
+            - const: arb
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        otp: efuse@ff290000 {
+            compatible = "rockchip,px30-otp";
+            reg = <0x0 0xff290000 0x0 0x4000>;
+            clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+                     <&cru PCLK_OTP_PHY>;
+            clock-names = "otp", "apb_pclk", "phy";
+            resets = <&cru SRST_OTP_PHY>;
+            reset-names = "phy";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            cpu_id: id@7 {
+                reg = <0x07 0x10>;
+            };
+
+            cpu_leakage: cpu-leakage@17 {
+                reg = <0x17 0x1>;
+            };
+
+            performance: performance@1e {
+                reg = <0x1e 0x1>;
+                bits = <4 3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
new file mode 100644
index 0000000000..c5403e1490
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip eFuse
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-efuse
+      - rockchip,rk3188-efuse
+      - rockchip,rk3228-efuse
+      - rockchip,rk3288-efuse
+      - rockchip,rk3328-efuse
+      - rockchip,rk3368-efuse
+      - rockchip,rk3399-efuse
+
+      # Deprecated: old compatible value for rk3066a, rk3188 and rk3288
+      - rockchip,rockchip-efuse
+
+  reg:
+    description:
+      Registers location and eFuse size.
+    maxItems: 1
+
+  clocks:
+    description:
+      eFuse clock id.
+    maxItems: 1
+
+  clock-names:
+    const: pclk_efuse
+
+  rockchip,efuse-size:
+    description:
+      eFuse size in bytes. The eFuse size in property <reg> will be invalid if
+      this property is defined.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    efuse: efuse@ffb40000 {
+            compatible = "rockchip,rk3288-efuse";
+            reg = <0xffb40000 0x20>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            clocks = <&cru PCLK_EFUSE256>;
+            clock-names = "pclk_efuse";
+
+            /* Data cells */
+            cpu_leakage: cpu_leakage@17 {
+                    reg = <0x17 0x1>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
new file mode 100644
index 0000000000..586c08286a
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
@@ -0,0 +1,52 @@
+= Spreadtrum SC27XX PMIC eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be one of the following.
+	"sprd,sc2720-efuse"
+	"sprd,sc2721-efuse"
+	"sprd,sc2723-efuse"
+	"sprd,sc2730-efuse"
+	"sprd,sc2731-efuse"
+- reg: Specify the address offset of efuse controller.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		efuse@380 {
+			compatible = "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+
+			/* Data cells */
+			thermal_calib: calib@10 {
+				reg = <0x10 0x2>;
+			};
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+	thermal {
+		...
+		nvmem-cells = <&thermal_calib>;
+		nvmem-cell-names = "calibration";
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
new file mode 100644
index 0000000000..ec20e33d9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/snvs-lpgpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Low Power General Purpose Register found in i.MX Secure Non-Volatile Storage
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx8mm-snvs-lpgpr
+              - fsl,imx8mn-snvs-lpgpr
+              - fsl,imx8mp-snvs-lpgpr
+              - fsl,imx8mq-snvs-lpgpr
+          - const: fsl,imx7d-snvs-lpgpr
+      - enum:
+          - fsl,imx6q-snvs-lpgpr
+          - fsl,imx6ul-snvs-lpgpr
+          - fsl,imx7d-snvs-lpgpr
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    snvs@20cc000 {
+        compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+        reg = <0x20cc000 0x4000>;
+
+        snvs_lpgpr: snvs-lpgpr {
+            compatible = "fsl,imx6q-snvs-lpgpr";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
new file mode 100644
index 0000000000..efccc5aacb
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/socionext,uniphier-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier eFuse
+
+maintainers:
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-efuse
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@100 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x100 0x28>;
+    };
+
+    efuse@200 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x200 0x68>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* Data cells */
+        usb_rterm0: trim@54,4 {
+            reg = <0x54 1>;
+            bits = <4 2>;
+        };
+        usb_rterm1: trim@55,4 {
+            reg = <0x55 1>;
+            bits = <4 2>;
+        };
+        usb_rterm2: trim@58,4 {
+            reg = <0x58 1>;
+            bits = <4 2>;
+        };
+        usb_rterm3: trim@59,4 {
+            reg = <0x59 1>;
+            bits = <4 2>;
+        };
+        usb_sel_t0: trim@54,0 {
+            reg = <0x54 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t1: trim@55,0 {
+            reg = <0x55 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t2: trim@58,0 {
+            reg = <0x58 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t3: trim@59,0 {
+            reg = <0x59 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i0: trim@56,0 {
+            reg = <0x56 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i2: trim@5a,0 {
+            reg = <0x5a 1>;
+            bits = <0 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt b/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt
new file mode 100644
index 0000000000..96b6feec27
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sprd-efuse.txt
@@ -0,0 +1,39 @@
+= Spreadtrum eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be "sprd,ums312-efuse".
+- reg: Specify the address offset of efuse controller.
+- clock-names: Should be "enable".
+- clocks: The phandle and specifier referencing the controller's clock.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	ap_efuse: efuse@32240000 {
+		compatible = "sprd,ums312-efuse";
+		reg = <0 0x32240000 0 0x10000>;
+		clock-names = "enable";
+		hwlocks = <&hwlock 8>;
+		clocks = <&aonapb_gate CLK_EFUSE_EB>;
+
+		/* Data cells */
+		thermal_calib: calib@10 {
+			reg = <0x10 0x2>;
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+	thermal {
+		...
+
+		nvmem-cells = <&thermal_calib>;
+		nvmem-cell-names = "calibration";
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
new file mode 100644
index 0000000000..a69de3e922
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Factory-programmed data
+
+description: |
+  This represents STM32 Factory-programmed read only non-volatile area: locked
+  flash, OTP, read-only HW regs... This contains various information such as:
+  analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2),
+  internal vref (VREFIN_CAL), unique device ID...
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-otp
+      - st,stm32mp13-bsec
+      - st,stm32mp15-bsec
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+
+    properties:
+      st,non-secure-otp:
+        description: |
+          This property explicits a factory programmed area that both secure
+          and non-secure worlds can access. It is needed when, by default, the
+          related area can only be reached by the secure world.
+        type: boolean
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@1fff7800 {
+      compatible = "st,stm32f4-otp";
+      reg = <0x1fff7800 0x400>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      calib@22c {
+        reg = <0x22c 0x2>;
+      };
+
+      mac_addr@e4 {
+        reg = <0xe4 0x8>;
+        st,non-secure-otp;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
new file mode 100644
index 0000000000..da3f1de7d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/sunplus,sp7021-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Sunplus SP7021
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-ocotp
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hb_gpio
+      - const: otprx
+
+  clocks:
+    maxItems: 1
+
+  thermal-calibration:
+    type: object
+    description: thermal calibration values
+
+  disconnect-voltage:
+    type: object
+    description: disconnect voltages of usb2 port 0 and port 1
+
+  mac-address0:
+    type: object
+    description: MAC address of ethernet port 0
+
+  mac-address1:
+    type: object
+    description: MAC address of ethernet port 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp: otp@9c00af00 {
+        compatible = "sunplus,sp7021-ocotp";
+        reg = <0x9c00af00 0x34>, <0x9c00af80 0x58>;
+        reg-names = "hb_gpio", "otprx";
+        clocks = <&clkc 0x15>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        therm_calib: thermal-calibration@14 {
+          reg = <0x14 0x3>;
+        };
+        disc_vol: disconnect-voltage@18 {
+          reg = <0x18 0x2>;
+        };
+        mac_addr0: mac-address0@34 {
+          reg = <0x34 0x6>;
+        };
+        mac_addr1: mac-address1@3a {
+          reg = <0x3a 0x6>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
new file mode 100644
index 0000000000..36d97fb878
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot environment variables
+
+description: |
+  U-Boot uses environment variables to store device parameters and
+  configuration. They may be used for booting process, setup or keeping end user
+  info.
+
+  Data is stored using U-Boot specific formats (variant specific header and NUL
+  separated key-value pairs).
+
+  Environment data can be stored on various storage entities, e.g.:
+  1. Raw flash partition
+  2. UBI volume
+
+  This binding allows marking storage device (as containing env data) and
+  specifying used format.
+
+  Right now only flash partition case is covered but it may be extended to e.g.
+  UBI volumes in the future.
+
+  Variables can be defined as NVMEM device subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - description: A standalone env data block
+        const: u-boot,env
+      - description: Two redundant blocks with active one flagged
+        const: u-boot,env-redundant-bool
+      - description: Two redundant blocks with active having higher counter
+        const: u-boot,env-redundant-count
+      - description: Broadcom's variant with custom header
+        const: brcm,env
+
+  reg:
+    maxItems: 1
+
+  bootcmd:
+    type: object
+    description: Command to use for automatic booting
+
+  ethaddr:
+    type: object
+    description: Ethernet interfaces base MAC address.
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x40000>;
+            label = "u-boot";
+            read-only;
+        };
+
+        env: partition@40000 {
+            compatible = "u-boot,env";
+            reg = <0x40000 0x10000>;
+
+            mac: ethaddr {
+                #nvmem-cell-cells = <1>;
+            };
+        };
+    };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x100000>;
+            compatible = "brcm,u-boot";
+            label = "u-boot";
+
+            partition-u-boot-env {
+                compatible = "brcm,env";
+
+                ethaddr {
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
new file mode 100644
index 0000000000..72ba628f6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt
@@ -0,0 +1,19 @@
+On-Chip OTP Memory for Freescale Vybrid
+
+Required Properties:
+  compatible:
+  - "fsl,vf610-ocotp", "syscon" for VF5xx/VF6xx
+  #address-cells : Should be 1
+  #size-cells : Should be 1
+  reg : Address and length of OTP controller and fuse map registers
+  clocks : ipg clock we associate with the OCOTP peripheral
+
+Example for Vybrid VF5xx/VF6xx:
+
+	ocotp: ocotp@400a5000 {
+		compatible = "fsl,vf610-ocotp", "syscon";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x400a5000 0xCF0>;
+		clocks = <&clks VF610_CLK_OCOTP>;
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
new file mode 100644
index 0000000000..4881561b3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
@@ -0,0 +1,46 @@
+--------------------------------------------------------------------------
+=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
+--------------------------------------------------------------------------
+The nvmem_firmware node provides access to the hardware related data
+like soc revision, IDCODE... etc, By using the firmware interface.
+
+Required properties:
+- compatible: should be "xlnx,zynqmp-nvmem-fw"
+
+= Data cells =
+Are child nodes of silicon id, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+-------
+ Example
+-------
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		nvmem_firmware {
+			compatible = "xlnx,zynqmp-nvmem-fw";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Data cells */
+			soc_revision: soc_revision {
+				reg = <0x0 0x4>;
+			};
+		};
+	};
+};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+	pcap {
+		...
+
+		nvmem-cells = <&soc_revision>;
+		nvmem-cell-names = "soc_revision";
+
+		...
+	};
diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
new file mode 100644
index 0000000000..0df79d9e07
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
@@ -0,0 +1,40 @@
+Zodiac Inflight Innovations RAVE EEPROM Bindings
+
+RAVE SP EEPROM device is a "MFD cell" device exposing physical EEPROM
+attached to RAVE Supervisory Processor. It is expected that its Device
+Tree node is specified as a child of the node corresponding to the
+parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Should be "zii,rave-sp-eeprom"
+
+Optional properties:
+
+- zii,eeprom-name: Unique EEPROM identifier describing its function in the
+  system. Will be used as created NVMEM deivce's name.
+
+Data cells:
+
+Data cells are child nodes of eerpom node, bindings for which are
+documented in Documentation/devicetree/bindings/nvmem/nvmem.txt
+
+Example:
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+
+			wdt_timeout: wdt-timeout@81 {
+				reg = <0x81 2>;
+			};
+		};
+	}
diff --git a/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
new file mode 100644
index 0000000000..4950c794ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt
@@ -0,0 +1,39 @@
+OpenRISC Generic SoC
+====================
+
+Boards and FPGA SoC's which support the OpenRISC standard platform.  The
+platform essentially follows the conventions of the OpenRISC architecture
+specification, however some aspects, such as the boot protocol have been defined
+by the Linux port.
+
+Required properties
+-------------------
+ - compatible: Must include "opencores,or1ksim"
+
+CPU nodes:
+----------
+A "cpus" node is required.  Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required for at least CPU 0.  Since the topology may
+be probed via CPS, it is not necessary to specify secondary CPUs.  Required
+properties:
+ - compatible: Must be "opencores,or1200-rtlsvn481".
+ - reg: CPU number.
+ - clock-frequency: The CPU clock frequency in Hz.
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+
+Boot protocol
+-------------
+The bootloader may pass the following arguments to the kernel:
+ - r3:  address of a flattened device-tree blob or 0x0.
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
new file mode 100644
index 0000000000..51f62c3ae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 CPU OPP
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  For some SoCs, the CPU frequency subset and voltage value of each
+  OPP varies based on the silicon variant in use. Allwinner Process
+  Voltage Scaling Tables defines the voltage and frequency value based
+  on the speedbin blown in the efuse combination. The
+  sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
+  provide the OPP framework with required information.
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-operating-points
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the efuse
+      registers that has information about the speedbin that is used
+      to select the right frequency/voltage value pair. Please refer
+      the for nvmem-cells bindings
+      Documentation/devicetree/bindings/nvmem/nvmem.txt and also
+      examples below.
+
+  opp-shared: true
+
+required:
+  - compatible
+  - nvmem-cells
+
+patternProperties:
+  "^opp-[0-9]+$":
+    type: object
+
+    properties:
+      opp-hz: true
+      clock-latency-ns: true
+
+    patternProperties:
+      "^opp-microvolt-speed[0-9]$": true
+
+    required:
+      - opp-hz
+      - opp-microvolt-speed0
+      - opp-microvolt-speed1
+      - opp-microvolt-speed2
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    cpu_opp_table: opp-table {
+        compatible = "allwinner,sun50i-h6-operating-points";
+        nvmem-cells = <&speedbin_efuse>;
+        opp-shared;
+
+        opp-480000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <480000000>;
+
+            opp-microvolt-speed0 = <880000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-720000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <720000000>;
+
+            opp-microvolt-speed0 = <880000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-816000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <816000000>;
+
+            opp-microvolt-speed0 = <880000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-888000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <888000000>;
+
+            opp-microvolt-speed0 = <940000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-1080000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <1080000000>;
+
+            opp-microvolt-speed0 = <1060000>;
+            opp-microvolt-speed1 = <880000>;
+            opp-microvolt-speed2 = <840000>;
+        };
+
+        opp-1320000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <1320000000>;
+
+            opp-microvolt-speed0 = <1160000>;
+            opp-microvolt-speed1 = <940000>;
+            opp-microvolt-speed2 = <900000>;
+        };
+
+        opp-1488000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <1488000000>;
+
+            opp-microvolt-speed0 = <1160000>;
+            opp-microvolt-speed1 = <1000000>;
+            opp-microvolt-speed2 = <960000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
new file mode 100644
index 0000000000..02d1d2c171
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/operating-points-v2-ti-cpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/operating-points-v2-ti-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CPU OPP (Operating Performance Points)
+
+description:
+  TI SoCs, like those in the AM335x, AM437x, AM57xx, AM62x, and DRA7xx
+  families, the CPU frequencies subset and the voltage value of each
+  OPP vary based on the silicon variant used. The data sheet sections
+  corresponding to "Operating Performance Points" describe the frequency
+  and voltage values based on device type and speed bin information
+  blown in corresponding eFuse bits as referred to by the Technical
+  Reference Manual.
+
+  This document extends the operating-points-v2 binding by providing
+  the hardware description for the scheme mentioned above.
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-ti-cpu
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      points to syscon node representing the control module
+      register space of the SoC.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp(-?[0-9]+)*$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      clock-latency-ns: true
+      opp-hz: true
+      opp-microvolt: true
+      opp-supported-hw: true
+      opp-suspend: true
+      turbo-mode: true
+
+    required:
+      - opp-hz
+      - opp-supported-hw
+
+required:
+  - compatible
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    opp-table {
+        compatible = "operating-points-v2-ti-cpu";
+        syscon = <&scm_conf>;
+
+        opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x06 0x0020>;
+            opp-suspend;
+        };
+
+        opp-500000000 {
+            opp-hz = /bits/ 64 <500000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x01 0xFFFF>;
+        };
+
+        opp-600000000 {
+            opp-hz = /bits/ 64 <600000000>;
+            opp-microvolt = <1100000 1078000 1122000>;
+            opp-supported-hw = <0x06 0x0040>;
+        };
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <1325000 1298500 1351500>;
+            opp-supported-hw = <0x04 0x0200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
new file mode 100644
index 0000000000..07e26c2678
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) v1
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |+
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This binding only supports voltage-frequency pairs.
+
+select: true
+
+properties:
+  operating-points:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Frequency in kHz
+        - description: Voltage for OPP in uV
+
+
+additionalProperties: true
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            operating-points =
+                /* kHz    uV */
+                <792000 1100000>,
+                <396000 950000>,
+                <198000 850000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
new file mode 100644
index 0000000000..e2f8f7af3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Common Properties
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This describes the OPPs belonging to a device.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: '^opp-table(-[a-z0-9]+)?$'
+
+  opp-shared:
+    description:
+      Indicates that device nodes using this OPP Table Node's phandle switch
+      their DVFS state together, i.e. they share clock/voltage/current lines.
+      Missing property means devices have independent clock/voltage/current
+      lines, but they share OPP tables.
+    type: boolean
+
+patternProperties:
+  '^opp(-?[0-9]+)*$':
+    type: object
+    description:
+      One or more OPP nodes describing voltage-current-frequency combinations.
+      Their name isn't significant but their phandle can be used to reference an
+      OPP. These are mandatory except for the case where the OPP table is
+      present only to indicate dependency between devices using the opp-shared
+      property.
+
+    properties:
+      opp-hz:
+        description:
+          Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
+          required property for all device nodes, unless another "required"
+          property to uniquely identify the OPP nodes exists. Devices like power
+          domains must have another (implementation dependent) property.
+
+          Entries for multiple clocks shall be provided in the same field, as
+          array of frequencies.  The OPP binding doesn't provide any provisions
+          to relate the values to their clocks or the order in which the clocks
+          need to be configured and that is left for the implementation
+          specific binding.
+        minItems: 1
+        maxItems: 32
+        items:
+          maxItems: 1
+
+      opp-microvolt:
+        description: |
+          Voltage for the OPP
+
+          A single regulator's voltage is specified with an array of size one or three.
+          Single entry is for target voltage and three entries are for <target min max>
+          voltages.
+
+          Entries for multiple regulators shall be provided in the same field separated
+          by angular brackets <>. The OPP binding doesn't provide any provisions to
+          relate the values to their power supplies or the order in which the supplies
+          need to be configured and that is left for the implementation specific
+          binding.
+
+          Entries for all regulators shall be of the same size, i.e. either all use a
+          single value or triplets.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      opp-microamp:
+        description: |
+          The maximum current drawn by the device in microamperes considering
+          system specific parameters (such as transients, process, aging,
+          maximum operating temperature range etc.) as necessary. This may be
+          used to set the most efficient regulator operating mode.
+
+          Should only be set if opp-microvolt or opp-microvolt-<name> is set for
+          the OPP.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If current values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-microwatt:
+        description: |
+          The power for the OPP in micro-Watts.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If power values aren't required
+          for a regulator, then it shall be filled with 0. If power values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-level:
+        description:
+          A value representing the performance level of the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      opp-peak-kBps:
+        description:
+          Peak bandwidth in kilobytes per second, expressed as an array of
+          32-bit big-endian integers. Each element of the array represents the
+          peak bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      opp-avg-kBps:
+        description:
+          Average bandwidth in kilobytes per second, expressed as an array
+          of 32-bit big-endian integers. Each element of the array represents the
+          average bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths. This property is only
+          meaningful in OPP tables where opp-peak-kBps is present.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      clock-latency-ns:
+        description:
+          Specifies the maximum possible transition latency (in nanoseconds) for
+          switching to this OPP from any other OPP.
+
+      turbo-mode:
+        description:
+          Marks the OPP to be used only for turbo modes. Turbo mode is available
+          on some platforms, where the device can run over its operating
+          frequency for a short duration of time limited by the device's power,
+          current and thermal limits.
+        type: boolean
+
+      opp-suspend:
+        description:
+          Marks the OPP to be used during device suspend. If multiple OPPs in
+          the table have this, the OPP with highest opp-hz will be used.
+        type: boolean
+
+      opp-supported-hw:
+        description: |
+          This property allows a platform to enable only a subset of the OPPs
+          from the larger set present in the OPP table, based on the current
+          version of the hardware (already known to the operating system).
+
+          Each block present in the array of blocks in this property, represents
+          a sub-group of hardware versions supported by the OPP. i.e. <sub-group
+          A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these
+          sub-groups match the hardware's version.
+
+          Each sub-group is a platform defined array representing the hierarchy
+          of hardware versions supported by the platform. For a platform with
+          three hierarchical levels of version (X.Y.Z), this field shall look
+          like
+
+          opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
+
+          Each level (eg. X1) in version hierarchy is represented by a 32 bit
+          value, one bit per version and so there can be maximum 32 versions per
+          level. Logical AND (&) operation is performed for each level with the
+          hardware's level version and a non-zero output for _all_ the levels in
+          a sub-group means the OPP is supported by hardware. A value of
+          0xFFFFFFFF for each level in the sub-group will enable the OPP for all
+          versions for the hardware.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        maxItems: 32
+        items:
+          minItems: 1
+          maxItems: 4
+
+      required-opps:
+        description:
+          This contains phandle to an OPP node in another device's OPP table. It
+          may contain an array of phandles, where each phandle points to an OPP
+          of a different device. It should not contain multiple phandles to the
+          OPP nodes in the same OPP table. This specifies the minimum required
+          OPP of the device(s), whose OPP's phandle is present in this property,
+          for the functioning of the current device at the current OPP (where
+          this property is present).
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
+
+    patternProperties:
+      '^opp-microvolt-':
+        description:
+          Named opp-microvolt property. This is exactly similar to the above
+          opp-microvolt property, but allows multiple voltage ranges to be
+          provided for the same OPP. At runtime, the platform can pick a <name>
+          and matching opp-microvolt-<name> property will be enabled for all
+          OPPs. If the platform doesn't pick a specific <name> or the <name>
+          doesn't match with any opp-microvolt-<name> properties, then
+          opp-microvolt property shall be used, if present.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      '^opp-microamp-':
+        description:
+          Named opp-microamp property. Similar to opp-microvolt-<name> property,
+          but for microamp instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      '^opp-microwatt-':
+        description:
+          Named opp-microwatt property. Similar to opp-microamp-<name> property,
+          but for microwatt instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+    dependencies:
+      opp-avg-kBps: [ opp-peak-kBps ]
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
new file mode 100644
index 0000000000..bbbad31ae4
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM OPP
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
+  the CPU frequencies subset and voltage value of each OPP varies based on
+  the silicon variant in use.
+  Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+  defines the voltage and frequency value based on the speedbin blown in
+  the efuse combination.
+  The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
+  the OPP framework with required information (existing HW bitmap).
+  This is used to determine the voltage and frequency value for each OPP of
+  operating-points-v2 table when it is parsed by the OPP framework.
+
+properties:
+  compatible:
+    const: operating-points-v2-kryo-cpu
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the
+      efuse registers that has information about the
+      speedbin that is used to select the right frequency/voltage
+      value pair.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-hz: true
+
+      opp-microvolt: true
+
+      opp-supported-hw:
+        description: |
+          A single 32 bit bitmap value, representing compatible HW.
+          Bitmap for MSM8996 format:
+          0:  MSM8996, speedbin 0
+          1:  MSM8996, speedbin 1
+          2:  MSM8996, speedbin 2
+          3:  MSM8996, speedbin 3
+          4-31:  unused
+
+          Bitmap for MSM8996SG format (speedbin shifted of 4 left):
+          0-3:  unused
+          4:  MSM8996SG, speedbin 0
+          5:  MSM8996SG, speedbin 1
+          6:  MSM8996SG, speedbin 2
+          7-31:  unused
+        enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
+               0x9, 0xd, 0xe, 0xf,
+               0x10, 0x20, 0x30, 0x70]
+
+      clock-latency-ns: true
+
+      required-opps: true
+
+    required:
+      - opp-hz
+
+required:
+  - compatible
+
+if:
+  required:
+    - nvmem-cells
+then:
+  patternProperties:
+    '^opp-?[0-9]+$':
+      required:
+        - opp-supported-hw
+
+additionalProperties: false
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. DB820c";
+        compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x0>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+                L2_0: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                    cache-unified;
+                };
+            };
+
+            CPU1: cpu@1 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x1>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+            };
+
+            CPU2: cpu@100 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+                L2_1: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                    cache-unified;
+                };
+            };
+
+            CPU3: cpu@101 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+            };
+
+            cpu-map {
+                cluster0 {
+                    core0 {
+                        cpu = <&CPU0>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU1>;
+                    };
+                };
+
+                cluster1 {
+                    core0 {
+                        cpu = <&CPU2>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU3>;
+                    };
+                };
+            };
+        };
+
+        cluster0_opp: opp-table-0 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x5>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cluster1_opp: opp-table-1 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1804800000 {
+                opp-hz = /bits/ 64 <1804800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x6>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp4>;
+            };
+            opp-1900800000 {
+                opp-hz = /bits/ 64 <1900800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x4>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp5>;
+            };
+            opp-2150400000 {
+                opp-hz = /bits/ 64 <2150400000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp6>;
+            };
+        };
+
+        smem {
+            compatible = "qcom,smem";
+            memory-region = <&smem_mem>;
+            hwlocks = <&tcsr_mutex 3>;
+        };
+
+        soc {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            qfprom: qfprom@74000 {
+                compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+                reg = <0x00074000 0x8ff>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                speedbin_efuse: speedbin@133 {
+                    reg = <0x133 0x1>;
+                    bits = <5 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
new file mode 100644
index 0000000000..a30ef93213
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm OPP
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-qcom-level
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-level: true
+
+      qcom,opp-fuse-level:
+        description: |
+          A positive value representing the fuse corner/level associated with
+          this OPP node. Sometimes several corners/levels shares a certain fuse
+          corner/level. A fuse corner/level contains e.g. ref uV, min uV,
+          and max uV.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
+
+    required:
+      - opp-level
+      - qcom,opp-fuse-level
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml
new file mode 100644
index 0000000000..6972d76233
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml
@@ -0,0 +1,475 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points)
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states
+     * together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+    };
+
+    cpu0_opp_table0: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
+     * independently.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@1 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@2 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <2>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 2>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@3 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <3>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 3>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply3>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    cpu_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        /*
+         * Missing opp-shared property means CPUs switch DVFS states
+         * independently.
+         */
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
+     * DVFS state together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@100 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <100>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+
+        cpu@101 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <101>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+    };
+
+    cluster0_opp: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+    cluster1_opp: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1300000000 {
+            opp-hz = /bits/ 64 <1300000000>;
+            opp-microvolt = <1050000 1045000 1055000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            opp-suspend;
+        };
+        opp-1400000000 {
+            opp-hz = /bits/ 64 <1400000000>;
+            opp-microvolt = <1075000>;
+            opp-microamp = <100000>;
+            clock-latency-ns = <400000>;
+        };
+        opp-1500000000 {
+            opp-hz = /bits/ 64 <1500000000>;
+            opp-microvolt = <1100000 1010000 1110000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /* Example 4: Handling multiple regulators */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "foo,cpu-type";
+            device_type = "cpu";
+            reg = <0>;
+
+            vcc0-supply = <&cpu_supply0>;
+            vcc1-supply = <&cpu_supply1>;
+            vcc2-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu0_opp_table4>;
+        };
+    };
+
+    cpu0_opp_table4: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <970000>, /* Supply 0 */
+                            <960000>, /* Supply 1 */
+                            <960000>; /* Supply 2 */
+            opp-microamp =  <70000>,  /* Supply 0 */
+                            <70000>,  /* Supply 1 */
+                            <70000>;  /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000001 {
+            opp-hz = /bits/ 64 <1000000001>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                            <965000 960000 975000>, /* Supply 1 */
+                            <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <70000>,    /* Supply 1 */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000002 {
+            opp-hz = /bits/ 64 <1000000002>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                <965000 960000 975000>, /* Supply 1 */
+                <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <0>,      /* Supply 1 doesn't need this */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 5: opp-supported-hw
+     * (example: three level hierarchy of versions: cuts, substrate and process)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            cpu-supply = <&cpu_supply>;
+            operating-points-v2 = <&cpu0_opp_table_slow>;
+        };
+    };
+
+    cpu0_opp_table_slow: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-600000000 {
+            /*
+             * Supports all substrate and process versions for 0xF
+             * cuts, i.e. only first four cuts.
+             */
+            opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <600000000>;
+        };
+
+        opp-800000000 {
+            /*
+             * Supports:
+             * - cuts: only one, 6th cut (represented by 6th bit).
+             * - substrate: supports 16 different substrate versions
+             * - process: supports 9 different process versions
+             */
+            opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>;
+            opp-hz = /bits/ 64 <800000000>;
+        };
+
+        opp-900000000 {
+            /*
+             * Supports:
+             * - All cuts and substrate where process version is 0x2.
+             * - All cuts and process where substrate version is 0x2.
+             */
+            opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>,
+                               <0xFFFFFFFF 0x01 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <900000000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+     * (example: device with two possible microvolt ranges: slow and fast)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            operating-points-v2 = <&cpu0_opp_table6>;
+        };
+    };
+
+    cpu0_opp_table6: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt-slow = <915000 900000 925000>;
+            opp-microvolt-fast = <975000 970000 985000>;
+            opp-microamp-slow =  <70000>;
+            opp-microamp-fast =  <71000>;
+        };
+
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
+                                 <925000 910000 935000>; /* Supply vcc1 */
+            opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
+                                 <965000 960000 975000>; /* Supply vcc1 */
+            opp-microamp =  <70000>; /* Will be used for both slow/fast */
+        };
+    };
+
+  - |
+    /*
+     * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
+     * distinct clock controls but two sets of clock/voltage/current lines.
+     */
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x100>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 0>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@1 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x101>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 1>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@2 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x102>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 2>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+        cpu@3 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x103>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 3>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+
+    };
+
+    cpu_opp0_table: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+
+    cpu_opp1_table: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
new file mode 100644
index 0000000000..693f225396
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/ti,omap-opp-supply.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/ti,omap-opp-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OMAP compatible OPP supply
+
+description:
+  OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse
+  registers, which contain OPP-specific voltage information tailored
+  for the specific device. This binding provides the information
+  needed to describe such a hardware values and relate them to program
+  the primary regulator during an OPP transition.
+
+  Also, some supplies may have an associated vbb-supply, an Adaptive
+  Body Bias regulator, which must transition in a specific sequence
+  w.r.t the vdd-supply and clk when making an OPP transition. By
+  supplying two regulators to the device that will undergo OPP
+  transitions, we can use the multi-regulator support implemented by
+  the OPP core to describe both regulators the platform needs. The
+  OPP core binding Documentation/devicetree/bindings/opp/opp-v2.yaml
+  provides further information (refer to Example 4 Handling multiple
+  regulators).
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+properties:
+  $nodename:
+    pattern: '^opp-supply(@[0-9a-f]+)?$'
+
+  compatible:
+    oneOf:
+      - description: Basic OPP supply controlling VDD and VBB
+        const: ti,omap-opp-supply
+      - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with
+          VBB.
+        const: ti,omap5-opp-supply
+      - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB
+        const: ti,omap5-core-opp-supply
+
+  reg:
+    maxItems: 1
+
+  ti,absolute-max-voltage-uv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Absolute maximum voltage for the OPP supply in micro-volts.
+    minimum: 750000
+    maximum: 1500000
+
+  ti,efuse-settings:
+    description: An array of u32 tuple items providing information about
+      optimized efuse configuration.
+    minItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Reference voltage in micro-volts (OPP Voltage)
+          minimum: 750000
+          maximum: 1500000
+          multipleOf: 10000
+        - description: efuse offset where the optimized voltage is located
+          multipleOf: 4
+          maximum: 256
+
+required:
+  - compatible
+  - ti,absolute-max-voltage-uv
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: ti,omap-opp-supply
+    then:
+      required:
+        - reg
+        - ti,efuse-settings
+
+additionalProperties: false
+
+examples:
+  - |
+    opp-supply {
+        compatible = "ti,omap-opp-supply";
+        ti,absolute-max-voltage-uv = <1375000>;
+    };
+  - |
+    opp-supply@4a003b20 {
+        compatible = "ti,omap5-opp-supply";
+        reg = <0x4a003b20 0x8>;
+        ti,efuse-settings =
+            /* uV   offset */
+            <1060000 0x0>,
+            <1160000 0x4>,
+            <1210000 0x8>;
+        ti,absolute-max-voltage-uv = <1500000>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
new file mode 100644
index 0000000000..3abeecf498
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
@@ -0,0 +1,39 @@
+* Freescale 83xx and 512x PCI bridges
+
+Freescale 83xx and 512x SOCs include the same PCI bridge core.
+
+83xx/512x specific notes:
+- reg: should contain two address length tuples
+    The first is for the internal PCI bridge registers
+    The second is for the PCI config space access registers
+
+Example (MPC8313ERDB)
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E -mini PCI */
+				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+				/* IDSEL 0x0F - PCI slot */
+				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
new file mode 100644
index 0000000000..2b8ca920a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -0,0 +1,59 @@
+Aardvark PCIe controller
+
+This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
+
+The Device Tree node describing an Aardvark PCIe controller must
+contain the following properties:
+
+ - compatible: Should be "marvell,armada-3700-pcie"
+ - reg: range of registers for the PCIe controller
+ - interrupts: the interrupt line of the PCIe controller
+ - #address-cells: set to <3>
+ - #size-cells: set to <2>
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions
+ - #interrupt-cells: set to <1>
+ - msi-controller: indicates that the PCIe controller can itself
+   handle MSI interrupts
+ - msi-parent: pointer to the MSI controller to be used
+ - interrupt-map-mask and interrupt-map: standard PCI properties to
+   define the mapping of the PCIe interface to interrupt numbers.
+ - bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt
+
+In addition, the Device Tree describing an Aardvark PCIe controller
+must include a sub-node that describes the legacy interrupt controller
+built into the PCIe controller. This sub-node must have the following
+properties:
+
+ - interrupt-controller
+ - #interrupt-cells: set to <1>
+
+Example:
+
+	pcie0: pcie@d0070000 {
+		compatible = "marvell,armada-3700-pcie";
+		device_type = "pci";
+		reg = <0 0xd0070000 0 0x20000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		msi-controller;
+		msi-parent = <&pcie0>;
+		ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+			  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		phys = <&comphy1 0>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
new file mode 100644
index 0000000000..9514c327d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
@@ -0,0 +1,27 @@
+* Altera PCIe MSI controller
+
+Required properties:
+- compatible:	should contain "altr,msi-1.0"
+- reg:		specifies the physical base address of the controller and
+		the length of the memory mapped region.
+- reg-names:	must include the following entries:
+		"csr": CSR registers
+		"vector_slave": vectors slave port region
+- interrupts:	specifies the interrupt source of the parent interrupt
+		controller. The format of the interrupt specifier depends on the
+		parent interrupt controller.
+- num-vectors:	number of vectors, range 1 to 32.
+- msi-controller:	indicates that this is MSI controller node
+
+
+Example
+msi0: msi@0xFF200000 {
+	compatible = "altr,msi-1.0";
+	reg = <0xFF200000 0x00000010
+		0xFF200010 0x00000080>;
+	reg-names = "csr", "vector_slave";
+	interrupt-parent = <&hps_0_arm_gic_0>;
+	interrupts = <0 42 4>;
+	msi-controller;
+	num-vectors = <32>;
+};
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
new file mode 100644
index 0000000000..816b244a22
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -0,0 +1,50 @@
+* Altera PCIe controller
+
+Required properties:
+- compatible :	should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
+- reg:		a list of physical base address and length for TXS and CRA.
+		For "altr,pcie-root-port-2.0", additional HIP base address and length.
+- reg-names:	must include the following entries:
+		"Txs": TX slave port region
+		"Cra": Control register access region
+		"Hip": Hard IP region (if "altr,pcie-root-port-2.0")
+- interrupts:	specifies the interrupt source of the parent interrupt
+		controller.  The format of the interrupt specifier depends
+		on the parent interrupt controller.
+- device_type:	must be "pci"
+- #address-cells:	set to <3>
+- #size-cells:		set to <2>
+- #interrupt-cells:	set to <1>
+- ranges:	describes the translation of addresses for root ports and
+		standard PCI regions.
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+		mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- msi-parent:	Link to the hardware entity that serves as the MSI controller
+		for this PCIe controller.
+- bus-range:	PCI bus numbers covered
+
+Example
+	pcie_0: pcie@c00000000 {
+		compatible = "altr,pcie-root-port-1.0";
+		reg = <0xc0000000 0x20000000>,
+			<0xff220000 0x00004000>;
+		reg-names = "Txs", "Cra";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 40 4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bus-range = <0x0 0xFF>;
+		device_type = "pci";
+		msi-parent = <&msi_to_gic_gen_0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_0 1>,
+			            <0 0 0 2 &pcie_0 2>,
+			            <0 0 0 3 &pcie_0 3>,
+			            <0 0 0 4 &pcie_0 4>;
+		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
+			  0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
new file mode 100644
index 0000000000..a5bd90bc07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AXG DWC PCIe SoC controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      enum:
+        - amlogic,axg-pcie
+        - amlogic,g12a-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,axg-pcie
+          - amlogic,g12a-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: External local bus interface registers
+      - description: Meson designed configuration registers
+      - description: PCIe configuration space
+
+  reg-names:
+    items:
+      - const: elbi
+      - const: cfg
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe GEN 100M PLL clock
+      - description: PCIe RC clock gate
+      - description: PCIe PHY clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: port
+      - const: general
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  resets:
+    items:
+      - description: Port Reset
+      - description: Shared APB reset
+
+  reset-names:
+    items:
+      - const: port
+      - const: apb
+
+  num-lanes:
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clock
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie: pcie@f9800000 {
+        compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+        reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
+        reg-names = "elbi", "cfg", "config";
+        interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&pclk>, <&clk_port>, <&clk_phy>;
+        clock-names = "pclk", "port", "general";
+        resets = <&reset_pcie_port>, <&reset_pcie_apb>;
+        reset-names = "port", "apb";
+        phys = <&pcie_phy>;
+        phy-names = "pcie";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+        bus-range = <0x0 0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        num-lanes = <1>;
+        ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
new file mode 100644
index 0000000000..215ff9a9c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple PCIe host controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple PCIe host controller is a PCIe host controller with
+  multiple root ports present in Apple ARM SoC platforms, including
+  various iPhone and iPad devices and the "Apple Silicon" Macs.
+  The controller incorporates Synopsys DesigWare PCIe logic to
+  implements its root ports.  But the ATU found on most DesignWare
+  PCIe host bridges is absent.
+
+  All root ports share a single ECAM space, but separate GPIOs are
+  used to take the PCI devices on those ports out of reset.  Therefore
+  the standard "reset-gpios" and "max-link-speed" properties appear on
+  the child nodes that represent the PCI bridges that correspond to
+  the individual root ports.
+
+  MSIs are handled by the PCIe controller and translated into regular
+  interrupts.  A range of 32 MSIs is provided.  These 32 MSIs can be
+  distributed over the root ports as the OS sees fit by programming
+  the PCIe controller's port registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pcie
+          - apple,t8112-pcie
+          - apple,t6000-pcie
+      - const: apple,pcie
+
+  reg:
+    minItems: 3
+    maxItems: 6
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: config
+      - const: rc
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+
+  ranges:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    description:
+      Interrupt specifiers, one for each root port.
+    minItems: 1
+    maxItems: 4
+
+  msi-parent: true
+
+  msi-ranges:
+    maxItems: 1
+
+  iommu-map: true
+  iommu-map-mask: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - bus-range
+  - interrupts
+  - msi-controller
+  - msi-parent
+  - msi-ranges
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8103-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 5
+        interrupts:
+          maxItems: 3
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie0: pcie@690000000 {
+        compatible = "apple,t8103-pcie", "apple,pcie";
+        device_type = "pci";
+
+        reg = <0x6 0x90000000 0x0 0x1000000>,
+              <0x6 0x80000000 0x0 0x100000>,
+              <0x6 0x81000000 0x0 0x4000>,
+              <0x6 0x82000000 0x0 0x4000>,
+              <0x6 0x83000000 0x0 0x4000>;
+        reg-names = "config", "rc", "port0", "port1", "port2";
+
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+        msi-controller;
+        msi-parent = <&pcie0>;
+        msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+        iommu-map = <0x100 &dart0 1 1>,
+                    <0x200 &dart1 1 1>,
+                    <0x300 &dart2 1 1>;
+        iommu-map-mask = <0xff00>;
+
+        bus-range = <0 3>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+                 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+        power-domains = <&ps_apcie_gp>;
+        pinctrl-0 = <&pcie_pins>;
+        pinctrl-names = "default";
+
+        pci@0,0 {
+          device_type = "pci";
+          reg = <0x0 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 152 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@1,0 {
+          device_type = "pci";
+          reg = <0x800 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 153 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@2,0 {
+          device_type = "pci";
+          reg = <0x1000 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 33 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 0000000000..cc6dcdb676
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,50 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
+	      "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
+	      "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode;
+	      "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode;
+- reg: base addresses and lengths of the PCIe controller (DBI),
+	the PHY controller, and configuration address space.
+- reg-names: Must include the following entries:
+	- "dbi"
+	- "phy"
+	- "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+	- "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+	used to enable and control the Synopsys IP.
+
+Example:
+
+	pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
new file mode 100644
index 0000000000..8eaa07ae97
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PCIe Root Port Controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  Embedded into Baikal-T1 SoC Root Complex controller with a single port
+  activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured
+  to have just a single Root Port function and is capable of establishing the
+  link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset
+  control module, so the proper interface initialization is supposed to be
+  performed by software. There four in- and four outbound iATU regions
+  which can be used to emit all required TLP types on the PCIe bus.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-pcie
+
+  reg:
+    description:
+      DBI, DBI2 and at least 4KB outbound iATU-capable region for the
+      peripheral devices CFG-space access.
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: config
+
+  interrupts:
+    description:
+      MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
+      request and eight Read/Write eDMA IRQ lines are available.
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: dma0
+      - const: dma1
+      - const: dma2
+      - const: dma3
+      - const: dma4
+      - const: dma5
+      - const: dma6
+      - const: dma7
+      - const: msi
+      - const: aer
+      - const: pme
+      - const: hp
+      - const: bw_mg
+      - const: l_eq
+
+  clocks:
+    description:
+      DBI (attached to the APB bus), AXI-bus master and slave interfaces
+      are fed up by the dedicated application clocks. A common reference
+      clock signal is supposed to be attached to the corresponding Ref-pad
+      of the SoC. It will be redistributed amongst the controller core
+      sub-modules (pipe, core, aux, etc).
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+      - const: ref
+
+  resets:
+    description:
+      A comprehensive controller reset logic is supposed to be implemented
+      by software, so almost all the possible application and core reset
+      signals are exposed via the system CCU module.
+    maxItems: 9
+
+  reset-names:
+    items:
+      - const: mstr
+      - const: slv
+      - const: pwr
+      - const: hot
+      - const: phy
+      - const: core
+      - const: pipe
+      - const: sticky
+      - const: non-sticky
+
+  baikal,bt1-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the Baikal-T1 System Controller DT node. It's required to
+      access some additional PM, Reset-related and LTSSM signals.
+
+  num-lanes:
+    maximum: 4
+
+  max-link-speed:
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    pcie@1f052000 {
+      compatible = "baikal,bt1-pcie";
+      device_type = "pci";
+      reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
+      reg-names = "dbi", "dbi2", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
+               <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "dma0", "dma1", "dma2", "dma3",
+                        "dma4", "dma5", "dma6", "dma7",
+                        "msi", "aer", "pme", "hp", "bw_mg",
+                        "l_eq";
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
+      clock-names = "dbi", "mstr", "slv", "ref";
+
+      resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
+               <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
+               <&ccu_sys 9>;
+      reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
+                    "sticky", "non-sticky";
+
+      reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>;
+
+      num-lanes = <4>;
+      max-link-speed = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 0000000000..0e07ab61a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  dma-coherent: true
+
+  brcm,pcie-ob:
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  brcm,pcie-ob-axi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi:
+    type: object
+    $ref: /schemas/interrupt-controller/msi-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: brcm,iproc-msi
+
+      interrupts:
+        maxItems: 4
+
+      brcm,pcie-msi-inten:
+        type: boolean
+        description:
+          Needs to be present for some older iProc platforms that require the
+          interrupt enable registers to be set explicitly to enable MSI
+
+  msi-parent: true
+
+dependencies:
+  brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+  brcm,pcie-msi-inten: [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gic: interrupt-controller {
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
+
+    pcie@18012000 {
+        compatible = "brcm,iproc-pcie";
+        reg = <0x18012000 0x1000>;
+
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+        linux,pci-domain = <0>;
+
+        bus-range = <0x00 0xff>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x81000000 0          0 0x28000000 0 0x00010000>,
+                 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+        phys = <&phy 0 5>;
+        phy-names = "pcie-phy";
+
+        brcm,pcie-ob;
+        brcm,pcie-ob-axi-offset = <0x00000000>;
+
+        msi-parent = <&msi0>;
+
+        /* iProc event queue based MSI */
+        msi0: msi {
+            compatible = "brcm,iproc-msi";
+            msi-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                    <GIC_SPI 97 IRQ_TYPE_NONE>,
+                    <GIC_SPI 98 IRQ_TYPE_NONE>,
+                    <GIC_SPI 99 IRQ_TYPE_NONE>;
+        };
+    };
+  - |
+    pcie@18013000 {
+        compatible = "brcm,iproc-pcie";
+        reg = <0x18013000 0x1000>;
+
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+        linux,pci-domain = <1>;
+
+        bus-range = <0x00 0xff>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x81000000 0          0 0x48000000 0 0x00010000>,
+                 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+        phys = <&phy 1 6>;
+        phy-names = "pcie-phy";
+    };
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 0000000000..7e15aae7d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2711-pcie # The Raspberry Pi 4
+          - brcm,bcm4908-pcie
+          - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
+          - brcm,bcm7216-pcie # Broadcom 7216 Arm
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    minItems: 1
+    maxItems: 4
+
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+  aspm-no-l0s: true
+
+  brcm,scb-sizes:
+    description: u64 giving the 64bit PCIe memory
+      viewport size of a memory controller.  There may be up to
+      three controllers, and each size must be a power of two
+      with a size greater or equal to the amount of memory the
+      controller supports.  Note that each memory controller
+      may have two component regions -- base and extended -- so
+      this information cannot be deduced from the dma-ranges.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    items:
+      minItems: 1
+      maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4908-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset controller handling the PERST# signal
+
+        reset-names:
+          items:
+            - const: perst
+
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-pcie
+    then:
+      properties:
+        resets:
+          items:
+            - description: phandle pointing to the RESCAL reset controller
+
+        reset-names:
+          items:
+            - const: rescal
+
+      required:
+        - resets
+        - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+                                 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+                    brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
new file mode 100644
index 0000000000..98651ab221
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe EP Controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: mem
+
+required:
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@fc000000 {
+                compatible = "cdns,cdns-pcie-ep";
+                reg = <0x0 0xfc000000 0x0 0x01000000>,
+                      <0x0 0x80000000 0x0 0x40000000>;
+                reg-names = "reg", "mem";
+                cdns,max-outbound-regions = <16>;
+                max-functions = /bits/ 8 <8>;
+                phys = <&pcie_phy0>;
+                phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
new file mode 100644
index 0000000000..bc3c48f60f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe host controller
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: cdns-pcie-host.yaml#
+
+properties:
+  compatible:
+    const: cdns,cdns-pcie-host
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: reg
+      - const: cfg
+
+  msi-parent: true
+
+required:
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@fb000000 {
+            compatible = "cdns,cdns-pcie-host";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xff>;
+            linux,pci-domain = <0>;
+            vendor-id = <0x17cd>;
+            device-id = <0x0200>;
+
+            reg = <0x0 0xfb000000  0x0 0x01000000>,
+                  <0x0 0x41000000  0x0 0x00001000>;
+            reg-names = "reg", "cfg";
+
+            ranges = <0x02000000 0x0 0x42000000  0x0 0x42000000  0x0 0x1000000>,
+                     <0x01000000 0x0 0x43000000  0x0 0x43000000  0x0 0x0010000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+            #interrupt-cells = <0x1>;
+
+            interrupt-map = <0x0 0x0 0x0  0x1  &gic  0x0 0x0 0x0 14 0x1>,
+                 <0x0 0x0 0x0  0x2  &gic  0x0 0x0 0x0 15 0x1>,
+                 <0x0 0x0 0x0  0x3  &gic  0x0 0x0 0x0 16 0x1>,
+                 <0x0 0x0 0x0  0x4  &gic  0x0 0x0 0x0 17 0x1>;
+
+            interrupt-map-mask = <0x0 0x0 0x0  0x7>;
+
+            msi-parent = <&its_pci>;
+
+            phys = <&pcie_phy0>;
+            phy-names = "pcie-phy";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
new file mode 100644
index 0000000000..47a302ba4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Device
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: cdns-pcie.yaml#
+  - $ref: pci-ep.yaml#
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
new file mode 100644
index 0000000000..a6b494401e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Host
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: cdns-pcie.yaml#
+
+properties:
+  cdns,max-outbound-regions:
+    description: maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    default: 32
+    deprecated: true
+
+  cdns,no-bar-match-nbits:
+    description:
+      Set into the no BAR match register to configure the number of least
+      significant bits kept during inbound (PCIe -> AXI) address translations
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 64
+    default: 32
+    deprecated: true
+
+  msi-parent: true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
new file mode 100644
index 0000000000..2e14f422e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Core
+
+maintainers:
+  - Tom Joseph <tjoseph@cadence.com>
+
+properties:
+  phys:
+    description:
+      One per lane if more than one in the list. If only one PHY listed it must
+      manage all lanes.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    items:
+      - const: pcie-phy
+    # FIXME: names when more than 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
new file mode 100644
index 0000000000..92efbf0f12
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTPCI100 PCI Host Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+    is a generic IP block from Faraday Technology. It exists in two variants:
+    plain and dual PCI. The plain version embeds a cascading interrupt controller
+    into the host bridge. The dual version routes the interrupts to the host
+    chips interrupt controller.
+    The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+    Technology) and product ID 0x4321.
+    I/O space considerations:
+    The plain variant has 128MiB of non-prefetchable memory space, whereas the
+    "dual" variant has 64MiB. Take this into account when describing the ranges.
+
+    Interrupt map considerations:
+
+    The "dual" variant will get INT A, B, C, D from the system interrupt controller
+    and should point to respective interrupt in that controller in its interrupt-map.
+
+    The code which is the only documentation of how the Faraday PCI (the non-dual
+    variant) interrupts assigns the default interrupt mapping/swizzling has
+    typically been like this, doing the swizzling on the interrupt controller side
+    rather than in the interconnect:
+
+    interrupt-map-mask = <0xf800 0 0 7>;
+    interrupt-map =
+        <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+        <0x4800 0 0 2 &pci_intc 1>,
+        <0x4800 0 0 3 &pci_intc 2>,
+        <0x4800 0 0 4 &pci_intc 3>,
+        <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+        <0x5000 0 0 2 &pci_intc 2>,
+        <0x5000 0 0 3 &pci_intc 3>,
+        <0x5000 0 0 4 &pci_intc 0>,
+        <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+        <0x5800 0 0 2 &pci_intc 3>,
+        <0x5800 0 0 3 &pci_intc 0>,
+        <0x5800 0 0 4 &pci_intc 1>,
+        <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+        <0x6000 0 0 2 &pci_intc 0>,
+        <0x6000 0 0 3 &pci_intc 1>,
+        <0x6000 0 0 4 &pci_intc 2>;
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-pci
+          - const: faraday,ftpci100
+      - items:
+          - const: cortina,gemini-pci-dual
+          - const: faraday,ftpci100-dual
+      - const: faraday,ftpci100
+      - const: faraday,ftpci100-dual
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 3
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 2
+
+  dma-ranges:
+    minItems: 3
+    description: |
+      three ranges for the inbound memory region. The ranges must
+      be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+      128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+      pre-fetchable.
+
+  clocks:
+    items:
+      - description: peripheral clock (PCLK)
+      - description: PCI clock (PCICLK).
+    description: |
+      If these are not present, they are assumed to be
+      hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: PCICLK
+
+  interrupt-controller:
+    type: object
+
+required:
+  - reg
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - dma-ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: faraday,ftpci100
+then:
+  required:
+    - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pci@50000000 {
+      compatible = "cortina,gemini-pci", "faraday,ftpci100";
+      reg = <0x50000000 0x100>;
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      #interrupt-cells = <1>;
+
+      bus-range = <0x00 0xff>;
+      ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+        <0x01000000 0 0          0x50000000 0 0x00100000>,
+        /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+        <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+      /* DMA ranges */
+      dma-ranges =
+        /* 128MiB at 0x00000000-0x07ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+        /* 64MiB at 0x00000000-0x03ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+        /* 64MiB at 0x00000000-0x03ffffff */
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+        <0x4800 0 0 2 &pci_intc 1>,
+        <0x4800 0 0 3 &pci_intc 2>,
+        <0x4800 0 0 4 &pci_intc 3>,
+        <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+        <0x5000 0 0 2 &pci_intc 2>,
+        <0x5000 0 0 3 &pci_intc 3>,
+        <0x5000 0 0 4 &pci_intc 0>,
+        <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+        <0x5800 0 0 2 &pci_intc 3>,
+        <0x5800 0 0 3 &pci_intc 0>,
+        <0x5800 0 0 4 &pci_intc 1>,
+        <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+        <0x6000 0 0 2 &pci_intc 0>,
+        <0x6000 0 0 3 &pci_intc 0>,
+        <0x6000 0 0 4 &pci_intc 0>;
+      pci_intc: interrupt-controller {
+        interrupt-parent = <&intcon>;
+        interrupt-controller;
+        interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <0>;
+        #interrupt-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
new file mode 100644
index 0000000000..d91b639ae7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe RC/EP controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description:
+  Generic Freescale i.MX PCIe Root Port and Endpoint controller
+  properties.
+
+properties:
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  num-lanes:
+    const: 1
+
+  fsl,imx7d-pcie-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to an fsl,imx7d-pcie-phy node. Additional
+      required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie,
+      and imx8mq-pcie-ep.
+
+  power-domains:
+    minItems: 1
+    items:
+      - description: The phandle pointing to the DISPLAY domain for
+          imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for
+          imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep.
+      - description: The phandle pointing to the PCIE_PHY power domains
+          for imx6sx-pcie and imx6sx-pcie-ep.
+
+  power-domain-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: pcie_phy
+
+  resets:
+    minItems: 2
+    maxItems: 3
+    description: Phandles to PCIe-related reset lines exposed by SRC
+      IP block. Additional required by imx7d-pcie, imx7d-pcie-ep,
+      imx8mq-pcie, and imx8mq-pcie-ep.
+
+  reset-names:
+    minItems: 2
+    maxItems: 3
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-3p5db:
+    description: Gen2 (3.5db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-6db:
+    description: Gen2 (6db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+
+  fsl,tx-swing-full:
+    description: Gen2 TX SWING FULL value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,tx-swing-low:
+    description: TX launch amplitude swing_low value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,max-link-speed:
+    description: Specify PCI Gen for link capability (optional required).
+      Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
+      requirements and thus for gen2 capability a gen2 compliant clock
+      generator should be used and configured.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  vpcie-supply:
+    description: Should specify the regulator in charge of PCIe port power.
+      The regulator will be enabled when initializing the PCIe host and
+      disabled either as part of the init process or when shutting down
+      the host (optional required).
+
+  vph-supply:
+    description: Should specify the regulator in charge of VPH one of
+      the three PCIe PHY powers. This regulator can be supplied by both
+      1.8v and 3.3v voltage supplies (optional required).
+
+required:
+  - clocks
+  - clock-names
+  - num-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-pcie
+              - fsl,imx6sx-pcie-ep
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mq-pcie
+              - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+                - fsl,imx6sx-pcie-ep
+                - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6qp-pcie-ep
+              - fsl,imx7d-pcie-ep
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mm-pcie
+              - fsl,imx8mp-pcie
+              - fsl,imx8mm-pcie-ep
+              - fsl,imx8mp-pcie-ep
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6qp-pcie-ep
+    then:
+      properties:
+        power-domains: false
+        power-domain-names: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx6q-pcie
+                - fsl,imx6qp-pcie
+                - fsl,imx6sx-pcie-ep
+                - fsl,imx6q-pcie-ep
+                - fsl,imx6qp-pcie-ep
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6sx-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx8mq-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6sx-pcie-ep
+              - fsl,imx6qp-pcie-ep
+              - fsl,imx7d-pcie-ep
+              - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: pciephy
+            - const: apps
+            - const: turnoff
+    else:
+      properties:
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: apps
+            - const: turnoff
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
new file mode 100644
index 0000000000..ee155ed5f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe Endpoint controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and
+  thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+  The controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-ep
+      - fsl,imx8mq-pcie-ep
+      - fsl,imx8mp-pcie-ep
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: addr_space
+
+  clocks:
+    minItems: 3
+    items:
+      - description: PCIe bridge clock.
+      - description: PCIe bus clock.
+      - description: PCIe PHY clock.
+      - description: Additional required clock entry for imx6sx-pcie,
+           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  interrupts:
+    items:
+      - description: builtin eDMA interrupter.
+
+  interrupt-names:
+    items:
+      - const: dma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+    else:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_aux
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+    #include <dt-bindings/reset/imx8mp-reset.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie_ep: pcie-ep@33800000 {
+      compatible = "fsl,imx8mp-pcie-ep";
+      reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+      reg-names = "dbi", "addr_space";
+      clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+               <&clk IMX8MP_CLK_HSIO_AXI>,
+               <&clk IMX8MP_CLK_PCIE_ROOT>;
+      clock-names = "pcie", "pcie_bus", "pcie_aux";
+      assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+      assigned-clock-rates = <10000000>;
+      assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+      num-lanes = <1>;
+      interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+      interrupt-names = "dma";
+      fsl,max-link-speed = <3>;
+      power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+      resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+               <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+      reset-names = "apps", "turnoff";
+      phys = <&pcie_phy>;
+      phy-names = "pcie-phy";
+      num-ib-windows = <4>;
+      num-ob-windows = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
new file mode 100644
index 0000000000..81bbb8728f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe host controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+  and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+  The controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See fsl,imx6q-pcie-ep.yaml for details on the Endpoint mode device tree
+  bindings.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6q-pcie
+      - fsl,imx6sx-pcie
+      - fsl,imx6qp-pcie
+      - fsl,imx7d-pcie
+      - fsl,imx8mq-pcie
+      - fsl,imx8mm-pcie
+      - fsl,imx8mp-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+
+  clocks:
+    minItems: 3
+    items:
+      - description: PCIe bridge clock.
+      - description: PCIe bus clock.
+      - description: PCIe PHY clock.
+      - description: Additional required clock entry for imx6sx-pcie,
+           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  interrupts:
+    items:
+      - description: builtin MSI controller.
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  reset-gpio:
+    description: Should specify the GPIO for controlling the PCI bus device
+      reset signal. It's not polarity aware and defaults to active-low reset
+      sequence (L=reset state, H=operation state) (optional required).
+
+  reset-gpio-active-high:
+    description: If present then the reset sequence using the GPIO
+      specified in the "reset-gpio" property is reversed (H=reset state,
+      L=operation state) (optional required).
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - device_type
+  - bus-range
+  - ranges
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6sx-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6q-pcie
+            - fsl,imx6qp-pcie
+            - fsl,imx7d-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie
+            - fsl,imx8mp-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_aux
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie: pcie@1ffc000 {
+        compatible = "fsl,imx6q-pcie";
+        reg = <0x01ffc000 0x04000>,
+              <0x01f00000 0x80000>;
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>,
+                 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
+        num-lanes = <1>;
+        interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0x7>;
+        interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                        <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+                <&clks IMX6QDL_CLK_LVDS1_GATE>,
+                <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+        clock-names = "pcie", "pcie_bus", "pcie_phy";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,pci.txt b/Documentation/devicetree/bindings/pci/fsl,pci.txt
new file mode 100644
index 0000000000..d8ac4a768e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,pci.txt
@@ -0,0 +1,27 @@
+* Bus Enumeration by Freescale PCI-X Agent
+
+Typically any Freescale PCI-X bridge hardware strapped into Agent mode
+is prevented from enumerating the bus. The PrPMC form-factor requires
+all mezzanines to be PCI-X Agents, but one per system may still
+enumerate the bus.
+
+The property defined below will allow a PCI-X bridge to be used for bus
+enumeration despite being strapped into Agent mode.
+
+Required properties:
+- fsl,pci-agent-force-enum : There is no value associated with this
+  property. The property itself is treated as a boolean.
+
+Example:
+
+	/* PCI-X bridge known to be PrPMC Monarch */
+	pci0: pci@ef008000 {
+		fsl,pci-agent-force-enum;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		...
+		...
+	};
diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
new file mode 100644
index 0000000000..c9f04999c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin SoCs PCIe host DT description
+
+maintainers:
+  - Xiaowei Song <songxiaowei@hisilicon.com>
+  - Binghui Wang <wangbinghui@hisilicon.com>
+
+description: |
+  Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+  It shares common functions with the PCIe DesignWare core driver and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - hisilicon,kirin960-pcie
+        - hisilicon,kirin970-pcie
+
+  reg:
+    description: |
+      Should contain dbi, apb, config registers location and length.
+      For hisilicon,kirin960-pcie, it should also contain phy.
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    maxItems: 4
+
+  clocks: true
+
+  clock-names:
+    items:
+      - const: pcie_phy_ref
+      - const: pcie_aux
+      - const: pcie_apb_phy
+      - const: pcie_apb_sys
+      - const: pcie_aclk
+
+  phys:
+    maxItems: 1
+
+  hisilicon,clken-gpios:
+    description: |
+      Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
+      mini-PCIe slots.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@f4000000 {
+        compatible = "hisilicon,kirin960-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000>,
+              <0x0 0xff3fe000 0x0 0x1000>,
+              <0x0 0xf3f20000 0x0 0x40000>,
+              <0x0 0xf5000000 0x0 0x2000>;
+        reg-names = "dbi", "apb", "phy", "config";
+        bus-range = <0x0  0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x02000000 0x0 0x00000000
+                  0x0 0xf6000000
+                  0x0 0x02000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <0 283 4>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0xf800 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+                 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+        clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
+                      "pcie_apb_sys", "pcie_aclk";
+      };
+
+      pcie@f5000000 {
+        compatible = "hisilicon,kirin970-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000000>,
+              <0x0 0xfc180000 0x0 0x1000>,
+              <0x0 0xf5000000 0x0 0x2000>;
+        reg-names = "dbi", "apb", "config";
+        bus-range = <0x0  0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        phys = <&pcie_phy>;
+        ranges = <0x02000000 0x0 0x00000000
+                  0x0 0xf6000000
+                  0x0 0x02000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio7 0 0>;
+        hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>;
+        pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
+          reg = <0 0 0 0 0>;
+          compatible = "pciclass,0604";
+          device_type = "pci";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+
+          pcie@0,0 { // Lane 0: upstream
+            reg = <0 0 0 0 0>;
+            compatible = "pciclass,0604";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+
+            pcie@1,0 { // Lane 4: M.2
+              reg = <0x0800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio3 1 0>;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+
+            pcie@5,0 { // Lane 5: Mini PCIe
+              reg = <0x2800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio27 4 0 >;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+
+            pcie@7,0 { // Lane 6: Ethernet
+              reg = <0x03800 0 0 0 0>;
+              compatible = "pciclass,0604";
+              device_type = "pci";
+              reset-gpios = <&gpio25 2 0 >;
+              #address-cells = <3>;
+              #size-cells = <2>;
+              ranges;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
new file mode 100644
index 0000000000..5f0cf6c2fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -0,0 +1,69 @@
+HiSilicon STB PCIe host bridge DT description
+
+The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
+It shares common functions with the DesignWare PCIe core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should be one of the following strings:
+		"hisilicon,hi3798cv200-pcie"
+- reg: Should contain sysctl, rc_dbi, config registers location and length.
+- reg-names: Must include the following entries:
+  "control": control registers of PCIe controller;
+  "rc-dbi": configuration space of PCIe controller;
+  "config": configuration transaction space of PCIe controller.
+- bus-range: PCI bus numbers covered.
+- interrupts: MSI interrupt.
+- interrupt-names: Must include "msi" entries.
+- clocks: List of phandle and clock specifier pairs as listed in clock-names
+  property.
+- clock-name: Must include the following entries:
+  "aux": auxiliary gate clock;
+  "pipe": pipe gate clock;
+  "sys": sys gate clock;
+  "bus": bus gate clock.
+- resets: List of phandle and reset specifier pairs as listed in reset-names
+  property.
+- reset-names: Must include the following entries:
+  "soft": soft reset;
+  "sys": sys reset;
+  "bus": bus reset.
+
+Optional properties:
+- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- vpcie-supply: The regulator in charge of PCIe port power.
+- phys: List of phandle and phy mode specifier, should be 0.
+- phy-names: Must be "phy".
+
+Example:
+	pcie@f9860000 {
+		compatible = "hisilicon,hi3798cv200-pcie";
+		reg = <0xf9860000 0x1000>,
+		      <0xf0000000 0x2000>,
+		      <0xf2000000 0x01000000>;
+		reg-names = "control", "rc-dbi", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0 15>;
+		num-lanes = <1>;
+		ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
+			0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&crg PCIE_AUX_CLK>,
+			 <&crg PCIE_PIPE_CLK>,
+			 <&crg PCIE_SYS_CLK>,
+			 <&crg PCIE_BUS_CLK>;
+		clock-names = "aux", "pipe", "sys", "bus";
+		resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+		reset-names = "soft", "sys", "bus";
+		phys = <&combphy1 PHY_TYPE_PCIE>;
+		phy-names = "phy";
+	};
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
new file mode 100644
index 0000000000..d25423aa71
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/host-generic-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PCI host controller
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+
+description: |
+  Firmware-initialised PCI host controllers and PCI emulations, such as the
+  virtio-pci implementations found in kvmtool and other para-virtualised
+  systems, do not require driver support for complexities such as regulator
+  and clock management. In fact, the controller may not even require the
+  configuration of a control interface by the operating system, instead
+  presenting a set of fixed windows describing a subset of IO, Memory and
+  Configuration Spaces.
+
+  Configuration Space is assumed to be memory-mapped (as opposed to being
+  accessed via an ioport) and laid out with a direct correspondence to the
+  geography of a PCI bus address by concatenating the various components to
+  form an offset.
+
+  For CAM, this 24-bit offset is:
+
+          cfg_offset(bus, device, function, register) =
+                     bus << 16 | device << 11 | function << 8 | register
+
+  While ECAM extends this by 4 bits to accommodate 4k of function space:
+
+          cfg_offset(bus, device, function, register) =
+                     bus << 20 | device << 15 | function << 12 | register
+
+properties:
+  compatible:
+    description: Depends on the layout of configuration space (CAM vs ECAM
+      respectively). May also have more specific compatibles.
+    oneOf:
+      - description:
+          PCIe host controller in Arm Juno based on PLDA XpressRICH3-AXI IP
+        items:
+          - const: arm,juno-r1-pcie
+          - const: plda,xpressrich3-axi
+          - const: pci-host-ecam-generic
+      - description: |
+          ThunderX PCI host controller for pass-1.x silicon
+
+          Firmware-initialized PCI host controller to on-chip devices found on
+          some Cavium ThunderX processors.  These devices have ECAM-based config
+          access, but the BARs are all at fixed addresses.  We handle the fixed
+          addresses by synthesizing Enhanced Allocation (EA) capabilities for
+          these devices.
+        const: cavium,pci-host-thunder-ecam
+      - description:
+          Cavium ThunderX PEM firmware-initialized PCIe host controller
+        const: cavium,pci-host-thunder-pem
+      - description:
+          HiSilicon Hip06/Hip07 PCIe host bridge in almost-ECAM mode. Some
+          firmware places the host controller in a mode where it is ECAM
+          compliant for all devices other than the root complex.
+        enum:
+          - hisilicon,hip06-pcie-ecam
+          - hisilicon,hip07-pcie-ecam
+      - description: |
+          In some cases, firmware may already have configured the Synopsys
+          DesignWare PCIe controller in RC mode with static ATU window mappings
+          that cover all config, MMIO and I/O spaces in a [mostly] ECAM
+          compatible fashion. In this case, there is no need for the OS to
+          perform any low level setup of clocks, PHYs or device registers, nor
+          is there any reason for the driver to reconfigure ATU windows for
+          config and/or IO space accesses at runtime.
+
+          In cases where the IP was synthesized with a minimum ATU window size
+          of 64 KB, it cannot be supported by the generic ECAM driver, because
+          it requires special config space accessors that filter accesses to
+          device #1 and beyond on the first bus.
+        items:
+          - enum:
+              - marvell,armada8k-pcie-ecam
+              - socionext,synquacer-pcie-ecam
+          - const: snps,dw-pcie-ecam
+      - description:
+          CAM or ECAM compliant PCI host controllers without any quirks
+        enum:
+          - pci-host-cam-generic
+          - pci-host-ecam-generic
+
+  reg:
+    description:
+      The Configuration Space base address and size, as accessed from the parent
+      bus. The base address corresponds to the first bus in the "bus-range"
+      property. If no "bus-range" is specified, this will be bus 0 (the
+      default). Some host controllers have a 2nd non-compliant address range,
+      so 2 entries are allowed.
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    description:
+      As described in IEEE Std 1275-1994, but must provide at least a
+      definition of non-prefetchable memory. One or both of prefetchable Memory
+      and IO Space may also be provided.
+    minItems: 1
+    maxItems: 3
+
+  dma-coherent: true
+  iommu-map: true
+  iommu-map-mask: true
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,juno-r1-pcie
+    then:
+      required:
+        - dma-coherent
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - cavium,pci-host-thunder-pem
+                - hisilicon,hip06-pcie-ecam
+                - hisilicon,hip07-pcie-ecam
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@40000000 {
+            compatible = "pci-host-cam-generic";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0x1>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x01000000  0x0 0x01000000  0x0 0x00010000>,
+                     <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x3f000000>;
+
+            #interrupt-cells = <0x1>;
+
+            // PCI_DEVICE(3)  INT#(1)  CONTROLLER(PHANDLE)  CONTROLLER_DATA(3)
+            interrupt-map = <   0x0 0x0 0x0  0x1  &gic  0x0 0x4 0x1>,
+                            < 0x800 0x0 0x0  0x1  &gic  0x0 0x5 0x1>,
+                            <0x1000 0x0 0x0  0x1  &gic  0x0 0x6 0x1>,
+                            <0x1800 0x0 0x0  0x1  &gic  0x0 0x7 0x1>;
+
+            // PCI_DEVICE(3)  INT#(1)
+            interrupt-map-mask = <0xf800 0x0 0x0  0x7>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 0000000000..debfb54a80
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-pci
+          - intel,ixp43x-pci
+    description: The two supported variants are ixp42x and ixp43x,
+      though more variants may exist.
+
+  reg:
+    items:
+      - description: IXP4xx-specific registers
+
+  interrupts:
+    items:
+      - description: Main PCI interrupt
+      - description: PCI DMA interrupt 1
+      - description: PCI DMA interrupt 2
+
+  ranges:
+    maxItems: 2
+    description: Typically one memory range of 64MB and one IO
+      space range of 64KB.
+
+  dma-ranges:
+    maxItems: 1
+    description: The DMA range tells the PCI host which addresses
+      the RAM is at. It can map only 64MB so if the RAM is bigger
+      than 64MB the DMA access has to be restricted to these
+      addresses.
+
+  "#interrupt-cells": true
+
+  interrupt-map: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0xf800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@c0000000 {
+      compatible = "intel,ixp43x-pci";
+      reg = <0xc0000000 0x1000>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      bus-range = <0x00 0xff>;
+
+      ranges =
+        <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+        <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+      dma-ranges =
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+        <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+        <0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
+        <0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+        <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+        <0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
+        <0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
+        <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+        <0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
+        <0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
+        <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+        <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
new file mode 100644
index 0000000000..730e63fd76
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PCIe controller Endpoint mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-pcie-ep
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: addr_space
+      - const: apb
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+      - const: pcie_mem_access
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pcie-ep@37000000 {
+          compatible = "intel,keembay-pcie-ep";
+          reg = <0x37000000 0x00001000>,
+                <0x37100000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36000000 0x01000000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+          num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
new file mode 100644
index 0000000000..505acc4f3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PCIe controller Root Complex mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: intel,keembay-pcie
+
+  ranges:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: atu
+      - const: config
+      - const: apb
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: master
+      - const: aux
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #define KEEM_BAY_A53_PCIE
+    #define KEEM_BAY_A53_AUX_PCIE
+    pcie@37000000 {
+          compatible = "intel,keembay-pcie";
+          reg = <0x37000000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36e00000 0x00200000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "atu", "config", "apb";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          device_type = "pci";
+          ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err";
+          clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+          clock-names = "master", "aux";
+          reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+          num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 0000000000..54e2890ae6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: intel,lgm-pcie
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  num-lanes:
+    maximum: 2
+
+  max-link-speed:
+    enum: [1, 2, 3, 4]
+    default: 1
+
+  reset-assert-ms:
+    description: |
+      Delay after asserting reset to the PCIe device.
+    maximum: 500
+    default: 100
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pcie10: pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 120>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
new file mode 100644
index 0000000000..ee8a4791a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -0,0 +1,79 @@
+Freescale Layerscape PCIe controller
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  RC mode:
+        "fsl,ls1021a-pcie"
+        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
+        "fsl,ls2088a-pcie"
+        "fsl,ls1088a-pcie"
+        "fsl,ls1046a-pcie"
+        "fsl,ls1043a-pcie"
+        "fsl,ls1012a-pcie"
+        "fsl,ls1028a-pcie"
+  EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
+- fsl,pcie-scfg: Must include two entries.
+  The first entry must be a link to the SCFG device node
+  The second entry is the physical PCIe controller index starting from '0'.
+  This is used to get SCFG PEXN registers
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
+Example:
+
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
new file mode 100644
index 0000000000..b40fb5d15d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
@@ -0,0 +1,52 @@
+NXP Layerscape PCIe Gen4 controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+  "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+  "csr_axi_slave": Bridge config registers
+  "config_axi_slave": PCIe controller registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+  "intr": The interrupt that is asserted for controller interrupts
+  "aer": Asserted for aer interrupt when chip support the aer interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+  "pme": Asserted for pme interrupt when chip support the pme interrupt with
+	 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+  of the data transferred from/to the IP block. This can avoid the software
+  cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+	pcie@3400000 {
+		compatible = "fsl,lx2160a-pcie";
+		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+		       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+		reg-names = "csr_axi_slave", "config_axi_slave";
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+		interrupt-names = "aer", "pme", "intr";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		apio-wins = <8>;
+		ppio-wins = <8>;
+		dma-coherent;
+		bus-range = <0x0 0xff>;
+		msi-parent = <&its>;
+		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
new file mode 100644
index 0000000000..a8324a9bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCI Host Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |+
+  PCI host controller found on Loongson PCHs and SoCs.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-pci
+      - loongson,ls7a-pci
+      - loongson,rs780e-pci
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG0 standard config space register
+      - description: CFG1 extended config space register
+
+  ranges:
+    minItems: 1
+    maxItems: 3
+
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1a000000 {
+            compatible = "loongson,rs780e-pci";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x1a000000  0x0 0x2000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x00004000  0x0 0x00004000  0x0 0x00004000>,
+                     <0x02000000 0x0 0x40000000  0x0 0x40000000  0x0 0x40000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
new file mode 100644
index 0000000000..e63e6458ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 PCIe controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |+
+  MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
+  with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci
+
+  reg:
+    items:
+      - description: host-pci bridge registers
+      - description: pcie port 0 RC control registers
+      - description: pcie port 1 RC control registers
+      - description: pcie port 2 RC control registers
+
+  ranges:
+    maxItems: 2
+
+patternProperties:
+  '^pcie@[0-2],0$':
+    type: object
+    $ref: /schemas/pci/pci-bus.yaml#
+
+    properties:
+      resets:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      phy-names:
+        pattern: '^pcie-phy[0-2]$'
+
+    required:
+      - "#interrupt-cells"
+      - interrupt-map-mask
+      - interrupt-map
+      - resets
+      - clocks
+      - phys
+      - phy-names
+      - ranges
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pcie: pcie@1e140000 {
+        compatible = "mediatek,mt7621-pci";
+        reg = <0x1e140000 0x100>,
+              <0x1e142000 0x100>,
+              <0x1e143000 0x100>,
+              <0x1e144000 0x100>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pcie_pins>;
+        device_type = "pci";
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>,  /* pci memory */
+                 <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>;  /* io space */
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0xF800 0 0 0>;
+        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+
+        pcie@0,0 {
+            reg = <0x0000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 24>;
+            clocks = <&clkctrl 24>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy0";
+            ranges;
+        };
+
+        pcie@1,0 {
+            reg = <0x0800 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 25>;
+            clocks = <&clkctrl 25>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy1";
+            ranges;
+        };
+
+        pcie@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 26>;
+            clocks = <&clkctrl 26>;
+            phys = <&pcie2_phy 0>;
+            phy-names = "pcie-phy2";
+            ranges;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
new file mode 100644
index 0000000000..841a3d284b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIECFG controller
+
+maintainers:
+  - Chuanjia Liu <chuanjia.liu@mediatek.com>
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The MediaTek PCIECFG controller controls some feature about
+  LTSSM, ASPM and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,generic-pciecfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pciecfg: pciecfg@1a140000 {
+        compatible = "mediatek,generic-pciecfg", "syscon";
+        reg = <0x1a140000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
new file mode 100644
index 0000000000..7e8c7a2a5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |+
+  PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
+  and compatible with Gen2, Gen1 speed.
+
+  This PCIe controller supports up to 256 MSI vectors, the MSI hardware
+  block diagram is as follows:
+
+                    +-----+
+                    | GIC |
+                    +-----+
+                       ^
+                       |
+                   port->irq
+                       |
+               +-+-+-+-+-+-+-+-+
+               |0|1|2|3|4|5|6|7| (PCIe intc)
+               +-+-+-+-+-+-+-+-+
+                ^ ^           ^
+                | |    ...    |
+        +-------+ +------+    +-----------+
+        |                |                |
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+  |0|1|...|30|31|  |0|1|...|30|31|  |0|1|...|30|31| (MSI sets)
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+   ^ ^      ^  ^    ^ ^      ^  ^    ^ ^      ^  ^
+   | |      |  |    | |      |  |    | |      |  |  (MSI vectors)
+   | |      |  |    | |      |  |    | |      |  |
+
+    (MSI SET0)       (MSI SET1)  ...   (MSI SET7)
+
+  With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
+  each set has its own address for MSI message, and supports 32 MSI vectors
+  to generate interrupt.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7986-pcie
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+          - const: mediatek,mt8192-pcie
+      - const: mediatek,mt8192-pcie
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: pcie-mac
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    maxItems: 1
+
+  iommu-map-mask:
+    const: 0
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ phy, mac ]
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+
+  clock-names:
+    minItems: 4
+    maxItems: 6
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+      '#interrupt-cells':
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ranges
+  - clocks
+  - clock-names
+  - '#interrupt-cells'
+  - interrupt-controller
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt8192-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: top_133m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: peri_mem
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: peri_26m
+            - const: top_133m
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@11230000 {
+            compatible = "mediatek,mt8192-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x00 0x11230000 0x00 0x4000>;
+            reg-names = "pcie-mac";
+            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0x00 0x12000000 0x00
+                      0x12000000 0x00 0x1000000>;
+            clocks = <&infracfg 44>,
+                     <&infracfg 40>,
+                     <&infracfg 43>,
+                     <&infracfg 97>,
+                     <&infracfg 99>,
+                     <&infracfg 111>;
+            clock-names = "pl_250m", "tl_26m", "tl_96m",
+                          "tl_32k", "peri_26m", "top_133m";
+            assigned-clocks = <&topckgen 50>;
+            assigned-clock-parents = <&topckgen 91>;
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy";
+
+            resets = <&infracfg_rst 2>,
+                     <&infracfg_rst 3>;
+            reset-names = "phy", "mac";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                            <0 0 0 2 &pcie_intc 1>,
+                            <0 0 0 3 &pcie_intc 2>,
+                            <0 0 0 4 &pcie_intc 3>;
+            pcie_intc: interrupt-controller {
+                      #address-cells = <0>;
+                      #interrupt-cells = <1>;
+                      interrupt-controller;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
new file mode 100644
index 0000000000..6842275222
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,289 @@
+MediaTek Gen2 PCIe controller
+
+Required properties:
+- compatible: Should contain one of the following strings:
+	"mediatek,mt2701-pcie"
+	"mediatek,mt2712-pcie"
+	"mediatek,mt7622-pcie"
+	"mediatek,mt7623-pcie"
+	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the root ports.
+- reg-names: Names of the above areas to use during resource lookup.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names:
+  Mandatory entries:
+   - sys_ckN :transaction layer and data link layer clock
+  Required entries for MT2701/MT7623:
+   - free_ck :for reference clock of PCIe subsys
+  Required entries for MT2712/MT7622:
+   - ahb_ckN :AHB slave interface operating clock for CSR access and RC
+	      initiated MMIO access
+  Required entries for MT7622:
+   - axi_ckN :application layer MMIO channel operating clock
+   - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
+	      pcie_mac_ck/pcie_pipe_ck is turned off
+   - obff_ckN :OBFF functional block operating clock
+   - pipe_ckN :LTSSM and PHY/MAC layer operating clock
+  where N starting from 0 to one less than the number of root ports.
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+  number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+  which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+Required properties for MT7623/MT2701:
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
+  number of root ports.
+
+Required properties for MT2712/MT7622/MT7629:
+-interrupts: A list of interrupt outputs of the controller, must have one
+	     entry for each PCIe port
+- interrupt-names: Must include the following entries:
+	- "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+  and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+
+Examples for MT7623:
+
+	hifsys: syscon@1a000000 {
+		compatible = "mediatek,mt7623-hifsys",
+			     "mediatek,mt2701-hifsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pcie: pcie@1a140000 {
+		compatible = "mediatek,mt7623-pcie";
+		device_type = "pci";
+		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+		      <0 0x1a142000 0 0x1000>, /* Port0 registers */
+		      <0 0x1a143000 0 0x1000>, /* Port1 registers */
+		      <0 0x1a144000 0 0x1000>; /* Port2 registers */
+		reg-names = "subsys", "port0", "port1", "port2";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xf800 0 0 0>;
+		interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+				<0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+				<0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+			 <&hifsys CLK_HIFSYS_PCIE0>,
+			 <&hifsys CLK_HIFSYS_PCIE1>,
+			 <&hifsys CLK_HIFSYS_PCIE2>;
+		clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+		resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+			 <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+		reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+		       <&pcie2_phy PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000	/* I/O space */
+			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
+
+		pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+		};
+
+		pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+		};
+
+		pcie@2,0 {
+			reg = <0x1000 0 0 0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			ranges;
+		};
+	};
+
+Examples for MT2712:
+
+	pcie1: pcie@112ff000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+			 <&pericfg CLK_PERI_PCIE1>;
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+Examples for MT7622:
+
+	pcie0: pcie@1a143000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AUX_EN>,
+			 <&pciesys CLK_PCIE_P0_AXI_EN>,
+			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
new file mode 100644
index 0000000000..f7a3c26363
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PCIe Root Port Bridge Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,pcie-host-1.0 # PolarFire
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: apb
+
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: '^fic[0-3]$'
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            pcie0: pcie@2030000000 {
+                    compatible = "microchip,pcie-host-1.0";
+                    reg = <0x0 0x70000000 0x0 0x08000000>,
+                          <0x0 0x43000000 0x0 0x00010000>;
+                    reg-names = "cfg", "apb";
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <119>;
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                                    <0 0 0 2 &pcie_intc0 1>,
+                                    <0 0 0 3 &pcie_intc0 2>,
+                                    <0 0 0 4 &pcie_intc0 3>;
+                    interrupt-parent = <&plic0>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    bus-range = <0x00 0x7f>;
+                    ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
+                    pcie_intc0: interrupt-controller {
+                        #address-cells = <0>;
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
new file mode 100644
index 0000000000..64156993e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -0,0 +1,72 @@
+* Mobiveil AXI PCIe Root Port Bridge DT description
+
+Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
+has up to 8 outbound and inbound windows for the address translation.
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "mbvl,gpex40-pcie"
+- reg: Should contain PCIe registers location and length
+	Mandatory:
+	"config_axi_slave": PCIe controller registers
+	"csr_axi_slave"	  : Bridge config registers
+	Optional:
+	"gpio_slave"	  : GPIO registers to control slot power
+	"apb_csr"	  : MSI registers
+
+- device_type: must be "pci"
+- apio-wins : number of requested apio outbound windows
+		default 2 outbound windows are configured -
+		1. Config window
+		2. Memory window
+- ppio-wins : number of requested ppio inbound windows
+		default 1 inbound memory window is configured.
+- bus-range: PCI bus numbers covered
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- interrupts: The interrupt line of the PCIe controller
+		last cell of this field is set to 4 to
+		denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
+- interrupt-map-mask,
+	interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+
+Example:
+++++++++
+	pcie0: pcie@a0000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		compatible = "mbvl,gpex40-pcie";
+		reg =	<0xa0000000 0x00001000>,
+			<0xb0000000 0x00010000>,
+			<0xff000000 0x00200000>,
+			<0xb0010000 0x00001000>;
+		reg-names =	"config_axi_slave",
+				"csr_axi_slave",
+				"gpio_slave",
+				"apb_csr";
+		device_type = "pci";
+		apio-wins = <2>;
+		ppio-wins = <1>;
+		bus-range = <0x00000000 0x000000ff>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <1>;
+		interrupts = < 0 89 4 >;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 0 &pci_express 0>,
+				<0 0 0 1 &pci_express 1>,
+				<0 0 0 2 &pci_express 2>,
+				<0 0 0 3 &pci_express 3>;
+		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
+
+	};
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
new file mode 100644
index 0000000000..6d022a9d36
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -0,0 +1,310 @@
+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+
+- compatible: one of the following values:
+    marvell,armada-370-pcie
+    marvell,armada-xp-pcie
+    marvell,dove-pcie
+    marvell,kirkwood-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges describing the MMIO registers to control the PCIe
+  interfaces, and ranges describing the MBus windows needed to access
+  the memory and I/O regions of each PCIe interface.
+- msi-parent: Link to the hardware entity that serves as the Message
+  Signaled Interrupt controller for this PCI controller.
+
+The ranges describing the MMIO registers have the following layout:
+
+    0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
+
+where:
+
+  * r is a 32-bits value that gives the offset of the MMIO
+  registers of this PCIe interface, from the base of the internal
+  registers.
+
+  * s is a 32-bits value that give the size of this MMIO
+  registers area. This range entry translates the '0x82000000 0 r' PCI
+  address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
+  of the internal register window (as identified by MBUS_ID(0xf0,
+  0x01)).
+
+The ranges describing the MBus windows have the following layout:
+
+    0x8t000000 s 0     MBUS_ID(w, a) 0 1 0
+
+where:
+
+   * t is the type of the MBus window (as defined by the standard PCI DT
+   bindings), 1 for I/O and 2 for memory.
+
+   * s is the PCI slot that corresponds to this PCIe interface
+
+   * w is the 'target ID' value for the MBus window
+
+   * a the 'attribute' value for the MBus window.
+
+Since the location and size of the different MBus windows is not fixed in
+hardware, and only determined in runtime, those ranges cover the full first
+4 GB of the physical address space, and do not translate into a valid CPU
+address.
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+
+- reg: used only for interrupt mapping, so only the first four bytes
+  are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+  this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, translating the MBus windows ranges of the parent node into
+  standard PCI addresses.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+  define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+  multiple lanes. If this property is not found, we assume that the
+  value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
+- reset-gpios: optional GPIO to PERST#
+- reset-delay-us: delay in us to wait after reset de-assertion, if not
+  specified will default to 100ms, as required by the PCIe specification.
+- interrupt-names: list of interrupt names, supported are:
+   - "intx" - interrupt line triggered by one of the legacy interrupt
+- interrupts or interrupts-extended: List of the interrupt sources which
+  corresponding to the "interrupt-names". If non-empty then also additional
+  'interrupt-controller' subnode must be defined.
+
+Example:
+
+pcie-controller {
+	compatible = "marvell,armada-xp-pcie";
+	device_type = "pci";
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bus-range = <0x00 0xff>;
+	msi-parent = <&mpic>;
+
+	ranges =
+	       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000	/* Port 0.0 registers */
+		0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000	/* Port 2.0 registers */
+		0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000	/* Port 0.1 registers */
+		0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000	/* Port 0.2 registers */
+		0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000	/* Port 0.3 registers */
+		0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000	/* Port 1.0 registers */
+		0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000	/* Port 3.0 registers */
+		0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000	/* Port 1.1 registers */
+		0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000	/* Port 1.2 registers */
+		0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000	/* Port 1.3 registers */
+		0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+		0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+		0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+		0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+		0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+		0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+		0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+		0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+		0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+		0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+		0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+		0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+		0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+		0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+		0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+		0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+		0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+		0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+		0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+		0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+	pcie@1,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+		reg = <0x0800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+			  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 58>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		/* low-active PERST# reset on GPIO 25 */
+		reset-gpios = <&gpio0 25 1>;
+		/* wait 20ms for device settle after reset deassertion */
+		reset-delay-us = <20000>;
+		clocks = <&gateclk 5>;
+	};
+
+	pcie@2,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+		reg = <0x1000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+			  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 59>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
+		clocks = <&gateclk 6>;
+	};
+
+	pcie@3,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+		reg = <0x1800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+			  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 60>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
+		clocks = <&gateclk 7>;
+	};
+
+	pcie@4,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+		reg = <0x2000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+			  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 61>;
+		marvell,pcie-port = <0>;
+		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
+		clocks = <&gateclk 8>;
+	};
+
+	pcie@5,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+		reg = <0x2800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+			  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 62>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		clocks = <&gateclk 9>;
+	};
+
+	pcie@6,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+		reg = <0x3000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+			  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 63>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
+		clocks = <&gateclk 10>;
+	};
+
+	pcie@7,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+		reg = <0x3800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+			  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 64>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
+		clocks = <&gateclk 11>;
+	};
+
+	pcie@8,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+		reg = <0x4000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+			  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 65>;
+		marvell,pcie-port = <1>;
+		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
+		clocks = <&gateclk 12>;
+	};
+
+	pcie@9,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+		reg = <0x4800 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+			  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 99>;
+		marvell,pcie-port = <2>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		clocks = <&gateclk 26>;
+	};
+
+	pcie@a,0 {
+		device_type = "pci";
+		assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+		reg = <0x5000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+			  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &mpic 103>;
+		marvell,pcie-port = <3>;
+		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
+		clocks = <&gateclk 27>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 0000000000..a24fb8307d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
+  of the controller instances are dual mode; they can work either in Root
+  Port mode or Endpoint mode but one at a time.
+
+  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+  operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie-ep
+      - nvidia,tegra234-pcie-ep
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture used to map the remote Root Complex address space
+
+  reg-names:
+    items:
+      - const: appl
+      - const: atu_dma
+      - const: dbi
+      - const: addr_space
+
+  interrupts:
+    items:
+      - description: controller interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  reset-gpios:
+    description: Must contain a phandle to a GPIO controller followed by GPIO
+      that is being used as PERST input signal. Please refer to pci.txt.
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals
+
+  nvidia,refclk-select-gpios:
+    maxItems: 1
+    description: GPIO used to enable REFCLK to controller from the host
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is configured
+      to receive Reference Clock from the host.
+      NOTE: This is applicable only for Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - reset-gpios
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra194-pcie-ep";
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/gpio/tegra234-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra234-pcie-ep";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,enable-ext-refclk;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon
+                                          TEGRA234_AON_GPIO(AA, 4)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
new file mode 100644
index 0000000000..fe81d52c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
@@ -0,0 +1,380 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie.yaml. Some of
+  the controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device
+  tree bindings.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie
+      - nvidia,tegra234-pcie
+
+  reg:
+    minItems: 4
+    items:
+      - description: controller's application logic registers
+      - description: configuration registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture to access the configuration space through ECAM.
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: appl
+      - const: config
+      - const: atu_dma
+      - const: dbi
+      - const: ecam
+
+  interrupts:
+    items:
+      - description: controller interrupt
+      - description: MSI interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+      - const: msi
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,update-fc-fixup:
+    description: |
+      This is a boolean property and needs to be present to improve performance
+      when a platform is designed in such a way that it satisfies at least one
+      of the following conditions thereby enabling Root Port to exchange
+      optimum number of FC (Flow Control) credits with downstream devices:
+
+      NOTE: This is applicable only for Tegra194.
+
+        1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
+        2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
+          a) speed is Gen-2 and MPS is 256B
+          b) speed is >= Gen-3 with any MPS
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals.
+
+  vpcie3v3-supply:
+    description: A phandle to the regulator node that supplies 3.3V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  vpcie12v-supply:
+    description: A phandle to the regulator node that supplies 12V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to use the reference clocking coming in from an external
+      clock source instead of using the internal clock source.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-pcie
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14180000 {
+            compatible = "nvidia,tegra194-pcie";
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+            reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <8>;
+            linux,pci-domain = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
+            clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+                     <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 0>;
+
+            supports-clkreq;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000>, /* downstream I/O */
+                     <0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
+                     <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+            vpcie3v3-supply = <&vdd_3v3_pcie>;
+            vpcie12v-supply = <&vdd_12v_pcie>;
+
+            phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+                   <&p2u_hsio_5>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14160000 {
+            compatible = "nvidia,tegra234-pcie";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+            reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+            reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <4>;
+            num-viewport = <8>;
+            linux,pci-domain = <4>;
+
+            clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+                     <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 4>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+                     <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+                     <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+            vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+            phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+                   <&p2u_hsio_7>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
new file mode 100644
index 0000000000..d099f3476c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -0,0 +1,670 @@
+NVIDIA Tegra PCIe controller
+
+Required properties:
+- compatible: Must be:
+  - "nvidia,tegra20-pcie": for Tegra20
+  - "nvidia,tegra30-pcie": for Tegra30
+  - "nvidia,tegra124-pcie": for Tegra124 and Tegra132
+  - "nvidia,tegra210-pcie": for Tegra210
+  - "nvidia,tegra186-pcie": for Tegra186
+- power-domains: To ungate power partition by BPMP powergate driver. Must
+  contain BPMP phandle and PCIe power partition ID. This is required only
+  for Tegra186.
+- device_type: Must be "pci"
+- reg: A list of physical base address and length for each set of controller
+  registers. Must contain an entry for each entry in the reg-names property.
+- reg-names: Must include the following entries:
+  "pads": PADS registers
+  "afi": AFI registers
+  "cs": configuration space region
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+  "intr": The Tegra interrupt that is asserted for controller interrupts
+  "msi": The Tegra interrupt that is asserted when an MSI is received
+- bus-range: Range of bus numbers associated with this controller
+- #address-cells: Address representation for root ports (must be 3)
+  - cell 0 specifies the bus and device numbers of the root port:
+    [23:16]: bus number
+    [15:11]: device number
+  - cell 1 denotes the upper 32 address bits and should be 0
+  - cell 2 contains the lower 32 address bits and is used to translate to the
+    CPU address space
+- #size-cells: Size representation for root ports (must be 2)
+- ranges: Describes the translation of addresses for root ports and standard
+  PCI regions. The entries must be 6 cells each, where the first three cells
+  correspond to the address as described for the #address-cells property
+  above, the fourth cell is the physical CPU address to translate to and the
+  fifth and six cells are as described for the #size-cells property above.
+  - The first two entries are expected to translate the addresses for the root
+    port registers, which are referenced by the assigned-addresses property of
+    the root port nodes (see below).
+  - The remaining entries setup the mapping for the standard I/O, memory and
+    prefetchable PCI regions. The first cell determines the type of region
+    that is setup:
+    - 0x81000000: I/O memory region
+    - 0x82000000: non-prefetchable memory region
+    - 0xc2000000: prefetchable memory region
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+  Please refer to the standard PCI bus binding document for a more detailed
+  explanation.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - pex
+  - afi
+  - pll_e
+  - cml (not required for Tegra20)
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - pex
+  - afi
+  - pcie_x
+
+Optional properties:
+- pinctrl-names: A list of pinctrl state names. Must contain the following
+  entries:
+  - "default": active state, puts PCIe I/O out of deep power down state
+  - "idle": puts PCIe I/O into deep power down state
+- pinctrl-0: phandle for the default/active state of pin configurations.
+- pinctrl-1: phandle for the idle state of pin configurations.
+
+Required properties on Tegra124 and later (deprecated):
+- phys: Must contain an entry for each entry in phy-names.
+- phy-names: Must include the following entries:
+  - pcie
+
+These properties are deprecated in favour of per-lane PHYs define in each of
+the root ports (see below).
+
+Power supplies for Tegra20:
+- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+  supply 1.05 V.
+- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+  supply 1.05 V.
+- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
+
+Power supplies for Tegra30:
+- Required:
+  - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+    supply 1.05 V.
+  - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+    supply 1.05 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 1.8 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 3.3 V.
+- Optional:
+  - If lanes 0 to 3 are used:
+    - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+    - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - If lanes 4 or 5 are used:
+    - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+    - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+Power supplies for Tegra124:
+- Required:
+  - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+  - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 3.3 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 2.8-3.3 V.
+
+Power supplies for Tegra210:
+- Required:
+  - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
+    clocks. Must supply 1.8 V.
+  - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 1.8 V.
+
+Power supplies for Tegra186:
+- Required:
+  - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
+    supply 1.8 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 1.8 V.
+  - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
+    supply 1.8 V.
+
+Root ports are defined as subnodes of the PCIe controller node.
+
+Required properties:
+- device_type: Must be "pci"
+- assigned-addresses: Address and size of the port configuration registers
+- reg: PCI bus address of the root port
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+  property is sufficient.
+- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations
+  are:
+  - Root port 0 uses 4 lanes, root port 1 is unused.
+  - Both root ports use 2 lanes.
+
+Required properties for Tegra124 and later:
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include an entry for each active lane. Note that the number
+  of entries does not have to (though usually will) be equal to the specified
+  number of lanes in the nvidia,num-lanes property. Entries are of the form
+  "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
+
+Examples:
+=========
+
+Tegra20:
+--------
+
+SoC DTSI:
+
+	pcie-controller@80003000 {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <0 98 0x04   /* controller interrupt */
+		              0 99 0x04>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0xa0000000 0xa0000000 0 0x10000000   /* non-prefetchable memory */
+			  0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@80003000 {
+		status = "okay";
+
+		vdd-supply = <&pci_vdd_reg>;
+		pex-clk-supply = <&pci_clk_reg>;
+
+		/* root port 00:01.0 */
+		pci@1,0 {
+			status = "okay";
+
+			/* bridge 01:00.0 (optional) */
+			pci@0,0 {
+				reg = <0x010000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				device_type = "pci";
+
+				/* endpoint 02:00.0 */
+				pci@0,0 {
+					reg = <0x020000 0 0 0 0>;
+				};
+			};
+		};
+	};
+
+Note that devices on the PCI bus are dynamically discovered using PCI's bus
+enumeration and therefore don't need corresponding device nodes in DT. However
+if a device on the PCI bus provides a non-probeable bus such as I2C or SPI,
+device nodes need to be added in order to allow the bus' children to be
+instantiated at the proper location in the operating system's device tree (as
+illustrated by the optional nodes in the example above).
+
+Tegra30:
+--------
+
+SoC DTSI:
+
+	pcie-controller@3000 {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800   /* PADS registers */
+		       0x00003800 0x00000200   /* AFI registers */
+		       0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@3000 {
+		status = "okay";
+
+		avdd-pexa-supply = <&ldo1_reg>;
+		vdd-pexa-supply = <&ldo1_reg>;
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		avdd-plle-supply = <&ldo1_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@3,0 {
+			status = "okay";
+		};
+	};
+
+Tegra124:
+---------
+
+SoC DTSI:
+
+	pcie-controller@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@1003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		/* Mini PCIe */
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+
+		/* Gigabit Ethernet */
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+Tegra210:
+---------
+
+SoC DTSI:
+
+	pcie-controller@1003000 {
+		compatible = "nvidia,tegra210-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+			 <&tegra_car TEGRA210_CLK_AFI>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>,
+			 <&tegra_car TEGRA210_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+Board DTS:
+
+	pcie-controller@1003000 {
+		status = "okay";
+
+		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+Tegra186:
+---------
+
+SoC DTSI:
+
+	pcie@10003000 {
+		compatible = "nvidia,tegra186-pcie";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+		device_type = "pci";
+		reg = <0x0 0x10003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x10003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0x0        0x0 0x50000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000   /* non-prefetchable memory (127 MiB) */
+			  0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+		clocks = <&bpmp TEGRA186_CLK_AFI>,
+			 <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_PLLE>;
+		clock-names = "afi", "pex", "pll_e";
+
+		resets = <&bpmp TEGRA186_RESET_AFI>,
+			 <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
+		reset-names = "afi", "pex", "pcie_x";
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+Board DTS:
+
+	pcie@10003000 {
+		status = "okay";
+
+		dvdd-pex-supply = <&vdd_pex>;
+		hvdd-pex-pll-supply = <&vdd_1v8>;
+		hvdd-pex-supply = <&vdd_1v8>;
+		vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <0>;
+			status = "disabled";
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+			status = "disabled";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
new file mode 100644
index 0000000000..ff25a134be
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -0,0 +1,48 @@
+* Marvell Armada 7K/8K PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "marvell,armada8k-pcie"
+- reg: must contain two register regions
+   - the control register region
+   - the config space region
+- reg-names:
+   - "ctrl" for the control register region
+   - "config" for the config space region
+- interrupts: Interrupt specifier for the PCIe controller
+- clocks: reference to the PCIe controller clocks
+- clock-names: mandatory if there is a second clock, in this case the
+   name must be "core" for the first clock and "reg" for the second
+   one
+
+Optional properties:
+- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
+	Either 1, 2 or 4 PHYs might be needed depending on the number of
+	PCIe lanes.
+- phy-names: names of the PHYs corresponding to the number of lanes.
+	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
+	2 PHYs.
+
+Example:
+
+	pcie@f2600000 {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+
+		bus-range = <0 0xff>;
+		ranges = <0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000	/* downstream I/O */
+			  0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;	/* non-prefetchable memory */
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clocks = <&cpm_syscon0 1 13>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
new file mode 100644
index 0000000000..d1eef48252
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCI Endpoint Controller
+
+description: |
+  Common properties for PCI Endpoint Controller Nodes.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie-ep@"
+
+  max-functions:
+    description: Maximum number of functions that can be configured
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    default: 1
+    maximum: 255
+
+  max-virtual-functions:
+    description: Array representing the number of virtual functions corresponding to each physical
+      function
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 255
+
+  max-link-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4 ]
+
+  num-lanes:
+    description: maximum number of lanes
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 1
+    maximum: 16
+
+required:
+  - compatible
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt
new file mode 100644
index 0000000000..0def586fdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-iommu.txt
@@ -0,0 +1,171 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI(e) devices and IOMMU(s).
+
+Each PCI(e) device under a root complex is uniquely identified by its Requester
+ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+IOMMUs may distinguish PCI devices through sideband data derived from the
+Requester ID. While a given PCI device can only master through one IOMMU, a
+root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per
+bus).
+
+The generic 'iommus' property is insufficient to describe this relationship,
+and a mechanism is required to map from a PCI device to its IOMMU and sideband
+data.
+
+For generic IOMMU bindings, see
+Documentation/devicetree/bindings/iommu/iommu.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier
+  data.
+
+  The property is an arbitrary number of tuples of
+  (rid-base,iommu,iommu-base,length).
+
+  Any RID r in the interval [rid-base, rid-base + length) is associated with
+  the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base).
+
+- iommu-map-mask: A mask to be applied to each Requester ID prior to being
+  mapped to an IOMMU specifier per the iommu-map property.
+
+
+Example (1)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the IOMMU is the RID,
+		 * identity-mapped.
+		 */
+		iommu-map = <0x0 &iommu 0x0 0x10000>;
+	};
+};
+
+
+Example (2)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the IOMMU is the RID with the
+		 * function bits masked out.
+		 */
+		iommu-map = <0x0 &iommu 0x0 0x10000>;
+		iommu-map-mask = <0xfff8>;
+	};
+};
+
+
+Example (3)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the IOMMU is the RID,
+		 * but the high bits of the bus number are flipped.
+		 */
+		iommu-map = <0x0000 &iommu 0x8000 0x8000>,
+			    <0x8000 &iommu 0x0000 0x8000>;
+	};
+};
+
+
+Example (4)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	iommu_a: iommu@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	iommu_b: iommu@b {
+		reg = <0xb 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	iommu_c: iommu@c {
+		reg = <0xc 0x1>;
+		compatible = "vendor,some-iommu";
+		#iommu-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * Devices with bus number 0-127 are mastered via IOMMU
+		 * a, with sideband data being RID[14:0].
+		 * Devices with bus number 128-255 are mastered via
+		 * IOMMU b, with sideband data being RID[14:0].
+		 * No devices master via IOMMU c.
+		 */
+		iommu-map = <0x0000 &iommu_a 0x0000 0x8000>,
+			    <0x8000 &iommu_b 0x0000 0x8000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt
new file mode 100644
index 0000000000..b73d839657
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-msi.txt
@@ -0,0 +1,220 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI devices and MSI controllers.
+
+Each PCI device under a root complex is uniquely identified by its Requester ID
+(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+MSIs may be distinguished in part through the use of sideband data accompanying
+writes. In the case of PCI devices, this sideband data may be derived from the
+Requester ID. A mechanism is required to associate a device with both the MSI
+controllers it can address, and the sideband data that will be associated with
+its writes to those controllers.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- msi-map: Maps a Requester ID to an MSI controller and associated
+  msi-specifier data. The property is an arbitrary number of tuples of
+  (rid-base,msi-controller,msi-base,length), where:
+
+  * rid-base is a single cell describing the first RID matched by the entry.
+
+  * msi-controller is a single phandle to an MSI controller
+
+  * msi-base is an msi-specifier describing the msi-specifier produced for the
+    first RID matched by the entry.
+
+  * length is a single cell describing how many consecutive RIDs are matched
+    following the rid-base.
+
+  Any RID r in the interval [rid-base, rid-base + length) is associated with
+  the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
+
+- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
+  to an msi-specifier per the msi-map property.
+
+- msi-parent: Describes the MSI parent of the root complex itself. Where
+  the root complex and MSI controller do not pass sideband data with MSI
+  writes, this property may be used to describe the MSI controller(s)
+  used by PCI devices under the root complex, if defined as such in the
+  binding for the root complex.
+
+
+Example (1)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, identity-mapped.
+		 */
+		msi-map = <0x0 &msi_a 0x0 0x10000>,
+	};
+};
+
+
+Example (2)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, masked to only the device and function bits.
+		 */
+		msi-map = <0x0 &msi_a 0x0 0x100>,
+		msi-map-mask = <0xff>
+	};
+};
+
+
+Example (3)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, but the high bit of the bus number is
+		 * ignored.
+		 */
+		msi-map = <0x0000 &msi 0x0000 0x8000>,
+			  <0x8000 &msi 0x0000 0x8000>;
+	};
+};
+
+
+Example (4)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to the MSI controller is
+		 * the RID, but the high bit of the bus number is
+		 * negated.
+		 */
+		msi-map = <0x0000 &msi 0x8000 0x8000>,
+			  <0x8000 &msi 0x0000 0x8000>;
+	};
+};
+
+
+Example (5)
+===========
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	msi_a: msi-controller@a {
+		reg = <0xa 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	msi_b: msi-controller@b {
+		reg = <0xb 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	msi_c: msi-controller@c {
+		reg = <0xc 0x1>;
+		compatible = "vendor,some-controller";
+		msi-controller;
+		#msi-cells = <1>;
+	};
+
+	pci: pci@f {
+		reg = <0xf 0x1>;
+		compatible = "vendor,pcie-root-complex";
+		device_type = "pci";
+
+		/*
+		 * The sideband data provided to MSI controller a is the
+		 * RID, but the high bit of the bus number is negated.
+		 * The sideband data provided to MSI controller b is the
+		 * RID, identity-mapped.
+		 * MSI controller c is not addressable.
+		 */
+		msi-map = <0x0000 &msi_a 0x8000 0x08000>,
+			  <0x8000 &msi_a 0x0000 0x08000>,
+			  <0x0000 &msi_b 0x0000 0x10000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
new file mode 100644
index 0000000000..6a8f2874a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -0,0 +1,84 @@
+PCI bus bridges have standardized Device Tree bindings:
+
+PCI Bus Binding to: IEEE Std 1275-1994
+https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
+
+And for the interrupt mapping part:
+
+Open Firmware Recommended Practice: Interrupt Mapping
+https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+   If present this property assigns a fixed PCI domain number to a host bridge,
+   otherwise an unstable (across boots) unique number will be assigned.
+   It is required to either not set this property at all or set it for all
+   host bridges in the system, otherwise potentially conflicting domain numbers
+   may be assigned to root buses behind different host bridges.  The domain
+   number for each host bridge in the system must be unique.
+- max-link-speed:
+   If present this property specifies PCI gen for link capability.  Host
+   drivers could add this as a strategy to avoid unnecessary operation for
+   unsupported link speed, for instance, trying to do training for
+   unsupported link speed, etc.  Must be '4' for gen4, '3' for gen3, '2'
+   for gen2, and '1' for gen1. Any other values are invalid.
+- reset-gpios:
+   If present this property specifies PERST# GPIO. Host drivers can parse the
+   GPIO and apply fundamental reset to endpoints.
+- supports-clkreq:
+   If present this property specifies that CLKREQ signal routing exists from
+   root port to downstream device and host bridge drivers can do programming
+   which depends on CLKREQ signal existence. For example, programming root port
+   not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal.
+
+PCI-PCI Bridge properties
+-------------------------
+
+PCIe root ports and switch ports may be described explicitly in the device
+tree, as children of the host bridge node. Even though those devices are
+discoverable by probing, it might be necessary to describe properties that
+aren't provided by standard PCIe capabilities.
+
+Required properties:
+
+- reg:
+   Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994
+   document, it is a five-cell address encoded as (phys.hi phys.mid
+   phys.lo size.hi size.lo). phys.hi should contain the device's BDF as
+   0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero.
+
+   The bus number is defined by firmware, through the standard bridge
+   configuration mechanism. If this port is a switch port, then firmware
+   allocates the bus number and writes it into the Secondary Bus Number
+   register of the bridge directly above this port. Otherwise, the bus
+   number of a root port is the first number in the bus-range property,
+   defaulting to zero.
+
+   If firmware leaves the ARI Forwarding Enable bit set in the bridge
+   above this port, then phys.hi contains the 8-bit function number as
+   0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification
+   recommends that firmware only leaves ARI enabled when it knows that the
+   OS is ARI-aware.
+
+Optional properties:
+
+- external-facing:
+   When present, the port is external-facing. All bridges and endpoints
+   downstream of this port are external to the machine. The OS can, for
+   example, use this information to identify devices that cannot be
+   trusted with relaxed DMA protection, as users could easily attach
+   malicious devices to this port.
+
+Example:
+
+pcie@10000000 {
+	compatible = "pci-host-ecam-generic";
+	...
+	pcie@0008 {
+		/* Root port 00:01.0 is external-facing */
+		reg = <0x00000800 0 0 0 0>;
+		external-facing;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
new file mode 100644
index 0000000000..2ad1fe466e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -0,0 +1,46 @@
+* Amazon Annapurna Labs PCIe host bridge
+
+Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
+PCI core. It inherits common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Properties of the host controller node that differ from it are:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Value should contain
+			- "amazon,al-alpine-v2-pcie" for alpine_v2
+			- "amazon,al-alpine-v3-pcie" for alpine_v3
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Must include the following entries
+			- "config"	PCIe ECAM space
+			- "controller"	AL proprietary registers
+			- "dbi"		Designware PCIe registers
+
+Example:
+
+	pcie-external0: pcie@fb600000 {
+		compatible = "amazon,al-alpine-v3-pcie";
+		reg = <0x0 0xfb600000 0x0 0x00100000
+		       0x0 0xfd800000 0x0 0x00010000
+		       0x0 0xfd810000 0x0 0x00001000>;
+		reg-names = "config", "controller", "dbi";
+		bus-range = <0 255>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0x00 0 0 7>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+		ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
new file mode 100644
index 0000000000..a223ce029c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdx55-pcie-ep
+          - qcom,sm8450-pcie-ep
+      - items:
+          - const: qcom,sdx65-pcie-ep
+          - const: qcom,sdx55-pcie-ep
+
+  reg:
+    items:
+      - description: Qualcomm-specific PARF configuration registers
+      - description: DesignWare PCIe registers
+      - description: External local bus interface registers
+      - description: Address Translation Unit (ATU) registers
+      - description: Memory region used to map remote RC address space
+      - description: BAR memory region
+
+  reg-names:
+    items:
+      - const: parf
+      - const: dbi
+      - const: elbi
+      - const: atu
+      - const: addr_space
+      - const: mmio
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    maxItems: 8
+
+  qcom,perst-regs:
+    description: Reference to a syscon representing TCSR followed by the two
+                 offsets within syscon for Perst enable and Perst separation
+                 enable registers
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Syscon to TCSR system registers
+          - description: Perst enable offset
+          - description: Perst separation enable offset
+
+  interrupts:
+    items:
+      - description: PCIe Global interrupt
+      - description: PCIe Doorbell interrupt
+
+  interrupt-names:
+    items:
+      - const: global
+      - const: doorbell
+
+  reset-gpios:
+    description: GPIO used as PERST# input signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO used as WAKE# output signal
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: core
+
+  power-domains:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pciephy
+
+  num-lanes:
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+  - interconnects
+  - interconnect-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - $ref: pci-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Sleep clock
+            - description: PCIe Reference clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: sleep
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Reference clock
+            - description: PCIe DDRSS SF TBU clock
+            - description: PCIe AGGRE NOC AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: ref
+            - const: ddrss_sf_tbu
+            - const: aggre_noc_axi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sdx55.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie_ep: pcie-ep@1c00000 {
+        compatible = "qcom,sdx55-pcie-ep";
+        reg = <0x01c00000 0x3000>,
+              <0x40000000 0xf1d>,
+              <0x40000f20 0xc8>,
+              <0x40001000 0x1000>,
+              <0x40002000 0x1000>,
+              <0x01c03000 0x3000>;
+        reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+                    "mmio";
+
+        clocks = <&gcc GCC_PCIE_AUX_CLK>,
+             <&gcc GCC_PCIE_CFG_AHB_CLK>,
+             <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+             <&gcc GCC_PCIE_SLEEP_CLK>,
+             <&gcc GCC_PCIE_0_CLKREF_CLK>;
+        clock-names = "aux", "cfg", "bus_master", "bus_slave",
+                      "slave_q2a", "sleep", "ref";
+
+        qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "global", "doorbell";
+        interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
+                        <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
+        interconnect-names = "pcie-mem", "cpu-pcie";
+        reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+        resets = <&gcc GCC_PCIE_BCR>;
+        reset-names = "core";
+        power-domains = <&gcc PCIE_GDSC>;
+        phys = <&pcie0_lane>;
+        phy-names = "pciephy";
+        max-link-speed = <3>;
+        num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
new file mode 100644
index 0000000000..eadba38171
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,981 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
+  PCIe IP.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pcie-apq8064
+          - qcom,pcie-apq8084
+          - qcom,pcie-ipq4019
+          - qcom,pcie-ipq6018
+          - qcom,pcie-ipq8064
+          - qcom,pcie-ipq8064-v2
+          - qcom,pcie-ipq8074
+          - qcom,pcie-ipq8074-gen3
+          - qcom,pcie-msm8996
+          - qcom,pcie-qcs404
+          - qcom,pcie-sa8540p
+          - qcom,pcie-sa8775p
+          - qcom,pcie-sc7280
+          - qcom,pcie-sc8180x
+          - qcom,pcie-sc8280xp
+          - qcom,pcie-sdm845
+          - qcom,pcie-sdx55
+          - qcom,pcie-sm8150
+          - qcom,pcie-sm8250
+          - qcom,pcie-sm8350
+          - qcom,pcie-sm8450-pcie0
+          - qcom,pcie-sm8450-pcie1
+          - qcom,pcie-sm8550
+      - items:
+          - const: qcom,pcie-msm8998
+          - const: qcom,pcie-msm8996
+
+  reg:
+    minItems: 4
+    maxItems: 6
+
+  reg-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    maxItems: 2
+
+  # Common definitions for clocks, clock-names and reset.
+  # Platform constraints are described later.
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  resets-names:
+    minItems: 1
+    maxItems: 12
+
+  vdda-supply:
+    description: A phandle to the core analog power supply
+
+  vdda_phy-supply:
+    description: A phandle to the core analog power supply for PHY
+
+  vdda_refclk-supply:
+    description: A phandle to the core analog power supply for IC which generates reference clock
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+      - msi-map-mask
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074-gen3
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+              - qcom,pcie-msm8996
+              - qcom,pcie-sdm845
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 5
+        reg-names:
+          minItems: 4
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: config # PCIe configuration space
+            - const: mhi # MHI registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8775p
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sc8280xp
+              - qcom,pcie-sdx55
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8350
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 6
+        reg-names:
+          minItems: 5
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: config # PCIe configuration space
+            - const: mhi # MHI registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: core # Clocks the pcie hw block
+            - const: iface # Configuration AHB clock
+            - const: phy # Clocks the pcie PHY block
+            - const: aux # Clocks the pcie AUX block, not on apq8064
+            - const: ref # Clocks the pcie ref block, not on apq8064
+        resets:
+          minItems: 5
+          maxItems: 6
+        reset-names:
+          minItems: 5
+          items:
+            - const: axi # AXI reset
+            - const: ahb # AHB reset
+            - const: por # POR reset
+            - const: pci # PCI reset
+            - const: phy # PHY reset
+            - const: ext # EXT reset, not on apq8064
+      required:
+        - vdda-supply
+        - vdda_phy-supply
+        - vdda_refclk-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # Configuration AHB clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+            - const: aux # Auxiliary (AUX) clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: core # Core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq4019
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux # Auxiliary (AUX) clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+        resets:
+          minItems: 12
+          maxItems: 12
+        reset-names:
+          items:
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: pipe # PIPE reset
+            - const: axi_m_vmid # VMID reset
+            - const: axi_s_xpu # XPU reset
+            - const: parf # PARF reset
+            - const: phy # PHY reset
+            - const: axi_m_sticky # AXI sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+            - const: phy_ahb # PHY AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: pipe # Pipe Clock driving internal logic
+            - const: aux # Auxiliary (AUX) clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+        resets: false
+        reset-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq8074
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+        resets:
+          minItems: 7
+          maxItems: 7
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074-gen3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge # AXI bridge clock
+            - const: rchng
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # AHB clock
+            - const: aux # Auxiliary clock
+            - const: master_bus # AXI Master clock
+            - const: slave_bus # AXI Slave clock
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdm845
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+        - properties:
+            clocks:
+              minItems: 7
+              maxItems: 7
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 9
+              maxItems: 9
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8350
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie0
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 8
+        clock-names:
+          minItems: 7
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr # Aggre NoC PCIe AXI clock
+            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+        resets:
+          minItems: 1
+          maxItems: 2
+        reset-names:
+          minItems: 1
+          items:
+            - const: pci # PCIe core reset
+            - const: link_down # PCIe link down reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr_4 # NoC aggregate 4 clock
+            - const: noc_aggr_south_sf # NoC aggregate South SF clock
+            - const: cnoc_qx # Configuration NoC QX clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdx55
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: sleep # PCIe Sleep clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8775p
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sa8775p
+              - qcom,pcie-sc8280xp
+    then:
+      required:
+        - interconnects
+        - interconnect-names
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-apq8064
+                - qcom,pcie-ipq4019
+                - qcom,pcie-ipq8064
+                - qcom,pcie-ipq8064v2
+                - qcom,pcie-ipq8074
+                - qcom,pcie-ipq8074-gen3
+                - qcom,pcie-qcs404
+    then:
+      required:
+        - power-domains
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+              - qcom,pcie-sa8775p
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sdm845
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8350
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
+    then:
+      oneOf:
+        - properties:
+            interrupts:
+              maxItems: 1
+            interrupt-names:
+              items:
+                - const: msi
+        - properties:
+            interrupts:
+              minItems: 8
+            interrupt-names:
+              items:
+                - const: msi0
+                - const: msi1
+                - const: msi2
+                - const: msi3
+                - const: msi4
+                - const: msi5
+                - const: msi6
+                - const: msi7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-apq8084
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064-v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-ipq8074-gen3
+              - qcom,pcie-qcs404
+              - qcom,pcie-sa8540p
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie@1b500000 {
+      compatible = "qcom,pcie-ipq8064";
+      reg = <0x1b500000 0x1000>,
+            <0x1b502000 0x80>,
+            <0x1b600000 0x100>,
+            <0x0ff00000 0x100000>;
+      reg-names = "dbi", "elbi", "parf", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+               <0x82000000 0 0 0x08000000 0 0x07e00000>;
+      interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 41>,
+               <&gcc 43>,
+               <&gcc 44>,
+               <&gcc 42>,
+               <&gcc 248>;
+      clock-names = "core", "iface", "phy", "aux", "ref";
+      resets = <&gcc 27>,
+               <&gcc 26>,
+               <&gcc 25>,
+               <&gcc 24>,
+               <&gcc 23>,
+               <&gcc 22>;
+      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+      pinctrl-0 = <&pcie_pins_default>;
+      pinctrl-names = "default";
+      vdda-supply = <&pm8921_s3>;
+      vdda_phy-supply = <&pm8921_lvs6>;
+      vdda_refclk-supply = <&ext_3p3v>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie@fc520000 {
+      compatible = "qcom,pcie-apq8084";
+      reg = <0xfc520000 0x2000>,
+            <0xff000000 0x1000>,
+            <0xff001000 0x1000>,
+            <0xff002000 0x2000>;
+      reg-names = "parf", "dbi", "elbi", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0          0xff200000 0 0x00100000>,
+               <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+      interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 324>,
+               <&gcc 325>,
+               <&gcc 327>,
+               <&gcc 323>;
+      clock-names = "iface", "master_bus", "slave_bus", "aux";
+      resets = <&gcc 81>;
+      reset-names = "core";
+      power-domains = <&gcc 1>;
+      vdda-supply = <&pma8084_l3>;
+      phys = <&pciephy0>;
+      phy-names = "pciephy";
+      perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+      pinctrl-0 = <&pcie0_pins_default>;
+      pinctrl-names = "default";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 0000000000..ffba4f63d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,187 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+   Required properties:
+
+   - compatible: must be "ralink,rt3883-pci"
+
+   - reg: specifies the physical base address of the controller and
+     the length of the memory mapped region.
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 1.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 1.
+
+   - ranges: specifies the translation between child address space and parent
+     address space
+
+  Optional properties:
+
+   - status: indicates the operational status of the device.
+     Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+   The main node must have two child nodes which describes the built-in
+   interrupt controller and the PCI host bridge.
+
+   a) Interrupt controller:
+
+   Required properties:
+
+   - interrupt-controller: identifies the node as an interrupt controller
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0. As such, 'interrupt-map' nodes do not
+     have to specify a parent unit address.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - interrupts: specifies the interrupt source of the parent interrupt
+     controller. The format of the interrupt specifier depends on the
+     parent interrupt controller.
+
+   b) PCI host bridge:
+
+   Required properties:
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 0.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 2.
+
+   - #interrupt-cells: specifies the number of cells needed to encode an
+     interrupt source. The value must be 1.
+
+   - device_type: must be "pci"
+
+   - bus-range: PCI bus numbers covered
+
+   - ranges: specifies the ranges for the PCI memory and I/O regions
+
+   - interrupt-map-mask,
+   - interrupt-map: standard PCI properties to define the mapping of the
+     PCI interface to interrupt numbers.
+
+   The PCI host bridge node might have additional sub-nodes representing
+   the onboard PCI devices/PCI slots. Each such sub-node must have the
+   following mandatory properties:
+
+     - reg: used only for interrupt mapping, so only the first four bytes
+       are used to refer to the correct bus number and device number.
+
+     - device_type: must be "pci"
+
+   If a given sub-node represents a PCI bridge it must have following
+   mandatory properties as well:
+
+     - #address-cells: must be set to <3>
+
+     - #size-cells: must set to <2>
+
+     - #interrupt-cells: must be set to <1>
+
+     - interrupt-map-mask,
+     - interrupt-map: standard PCI properties to define the mapping of the
+       PCI interface to interrupt numbers.
+
+   Besides the required properties the sub-nodes may have these optional
+   properties:
+
+     - status: indicates the operational status of the sub-node.
+       Value must be either "disabled" or "okay".
+
+3) Example:
+
+   a) SoC specific dtsi file:
+
+	pci@10140000 {
+		compatible = "ralink,rt3883-pci";
+		reg = <0x10140000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges; /* direct mapping */
+
+		status = "disabled";
+
+		pciintc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+		};
+
+		host-bridge {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			device_type = "pci";
+
+			bus-range = <0 255>;
+			ranges = <
+				0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+				0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+			>;
+
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 17 */
+				0x8800 0 0 1 &pciintc 18
+				0x8800 0 0 2 &pciintc 18
+				0x8800 0 0 3 &pciintc 18
+				0x8800 0 0 4 &pciintc 18
+				/* IDSEL 18 */
+				0x9000 0 0 1 &pciintc 19
+				0x9000 0 0 2 &pciintc 19
+				0x9000 0 0 3 &pciintc 19
+				0x9000 0 0 4 &pciintc 19
+			>;
+
+			pci-bridge@1 {
+				reg = <0x0800 0 0 0 0>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				interrupt-map-mask = <0x0 0 0 0>;
+				interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+				status = "disabled";
+			};
+
+			pci-slot@17 {
+				reg = <0x8800 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+
+			pci-slot@18 {
+				reg = <0x9000 0 0 0 0>;
+				device_type = "pci";
+
+				status = "disabled";
+			};
+		};
+	};
+
+   b) Board specific dts file:
+
+	pci@10140000 {
+		status = "okay";
+
+		host-bridge {
+			pci-bridge@1 {
+				status = "okay";
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
new file mode 100644
index 0000000000..32a3b7665f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Europe GmbH - https://www.renesas.com/eu/en/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Endpoint
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-pcie-ep     # RZ/G2M
+          - renesas,r8a774b1-pcie-ep     # RZ/G2N
+          - renesas,r8a774c0-pcie-ep     # RZ/G2E
+          - renesas,r8a774e1-pcie-ep     # RZ/G2H
+          - renesas,r8a7795-pcie-ep      # R-Car H3
+      - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: memory0
+      - const: memory1
+      - const: memory2
+      - const: memory3
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pcie
+
+  max-functions:
+    minimum: 1
+    maximum: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - resets
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a774c0-sysc.h>
+
+     pcie0_ep: pcie-ep@fe000000 {
+            compatible = "renesas,r8a774c0-pcie-ep",
+                         "renesas,rcar-gen3-pcie-ep";
+            reg = <0xfe000000 0x80000>,
+                  <0xfe100000 0x100000>,
+                  <0xfe200000 0x200000>,
+                  <0x30000000 0x8000000>,
+                  <0x38000000 0x8000000>;
+            reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&cpg 319>;
+            power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+            clocks = <&cpg CPG_MOD 319>;
+            clock-names = "pcie";
+            max-functions = /bits/ 8 <1>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
new file mode 100644
index 0000000000..8fdfbc763d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Host
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: pci-bus.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,pcie-r8a7779       # R-Car H1
+      - items:
+          - enum:
+              - renesas,pcie-r8a7742      # RZ/G1H
+              - renesas,pcie-r8a7743      # RZ/G1M
+              - renesas,pcie-r8a7744      # RZ/G1N
+              - renesas,pcie-r8a7790      # R-Car H2
+              - renesas,pcie-r8a7791      # R-Car M2-W
+              - renesas,pcie-r8a7793      # R-Car M2-N
+          - const: renesas,pcie-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pcie-r8a774a1     # RZ/G2M
+              - renesas,pcie-r8a774b1     # RZ/G2N
+              - renesas,pcie-r8a774c0     # RZ/G2E
+              - renesas,pcie-r8a774e1     # RZ/G2H
+              - renesas,pcie-r8a7795      # R-Car H3
+              - renesas,pcie-r8a7796      # R-Car M3-W
+              - renesas,pcie-r8a77961     # R-Car M3-W+
+              - renesas,pcie-r8a77965     # R-Car M3-N
+              - renesas,pcie-r8a77980     # R-Car V3H
+              - renesas,pcie-r8a77990     # R-Car E3
+          - const: renesas,pcie-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,pcie-r8a7779
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@fe000000 {
+            compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
+            reg = <0 0xfe000000 0 0x80000>;
+             #address-cells = <3>;
+             #size-cells = <2>;
+             bus-range = <0x00 0xff>;
+             device_type = "pci";
+             ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+                      <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+                      <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+                      <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+             dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>,
+                          <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
+             interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                          <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                          <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+             #interrupt-cells = <1>;
+             interrupt-map-mask = <0 0 0 0>;
+             interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+             clock-names = "pcie", "pcie_bus";
+             power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+             resets = <&cpg 319>;
+         };
+    };
diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
new file mode 100644
index 0000000000..5a0d64d3ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas AHB to PCI bridge
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  This is the bridge used internally to connect the USB controllers to the
+  AHB. There is one bridge instance per USB port connected to the internal
+  OHCI and EHCI controllers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,pci-r8a7742      # RZ/G1H
+              - renesas,pci-r8a7743      # RZ/G1M
+              - renesas,pci-r8a7744      # RZ/G1N
+              - renesas,pci-r8a7745      # RZ/G1E
+              - renesas,pci-r8a7790      # R-Car H2
+              - renesas,pci-r8a7791      # R-Car M2-W
+              - renesas,pci-r8a7793      # R-Car M2-N
+              - renesas,pci-r8a7794      # R-Car E2
+          - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pci-r9a06g032     # RZ/N1D
+          - const: renesas,pci-rzn1       # RZ/N1
+
+  reg:
+    items:
+      - description: Operational registers for the OHCI/EHCI controllers.
+      - description: Bridge configuration and control registers.
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  bus-range:
+    description: |
+      The PCI bus number range; as this is a single bus, the range
+      should be specified as the same value twice.
+
+  dma-ranges:
+    description: |
+      A single range for the inbound memory region. If not supplied,
+      defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
+      the allowed combinations of address and size.
+    maxItems: 1
+
+patternProperties:
+  '^usb@[0-1],0$':
+    type: object
+
+    description:
+      This a USB controller PCI device
+
+    properties:
+      reg:
+        description:
+          Identify the correct bus, device and function number in the
+          form <bdf 0 0 0 0>.
+
+        items:
+          minItems: 5
+          maxItems: 5
+
+      phys:
+        description:
+          Reference to the USB phy
+        maxItems: 1
+
+      phy-names:
+        maxItems: 1
+
+    required:
+      - reg
+      - phys
+      - phy-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - power-domains
+  - bus-range
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,pci-rzn1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Internal bus clock (AHB) for HOST
+            - description: Internal bus clock (AHB) Power Management
+            - description: PCI clock for USB subsystem
+        clock-names:
+          items:
+            - const: hclkh
+            - const: hclkpm
+            - const: pciclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Device clock
+        clock-names:
+          items:
+            - const: pclk
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    pci@ee090000  {
+        compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
+        device_type = "pci";
+        reg = <0xee090000 0xc00>,
+              <0xee080000 0x1100>;
+        clocks = <&cpg CPG_MOD 703>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 703>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-range = <0 0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
+        dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
+        interrupt-map-mask = <0xf800 0 0 0x7>;
+        interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        usb@1,0 {
+            reg = <0x800 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+
+        usb@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml
new file mode 100644
index 0000000000..a8574f8a84
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Bridge Common Properties
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+properties:
+  reg:
+    maxItems: 2
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: aclk-perf
+      - const: hclk
+      - const: pm
+
+  num-lanes:
+    maximum: 4
+
+  phys:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  phy-names:
+    oneOf:
+      - const: pcie-phy
+      - items:
+          - const: pcie-phy-0
+          - const: pcie-phy-1
+          - const: pcie-phy-2
+          - const: pcie-phy-3
+
+  resets:
+    maxItems: 7
+
+  reset-names:
+    items:
+      - const: core
+      - const: mgmt
+      - const: mgmt-sticky
+      - const: pipe
+      - const: pm
+      - const: pclk
+      - const: aclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
new file mode 100644
index 0000000000..6b62f6f58e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Endpoint
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie-ep
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: mem-base
+
+  rockchip,max-outbound-regions:
+    description: Maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 32
+    default: 32
+
+required:
+  - rockchip,max-outbound-regions
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@f8000000 {
+            compatible = "rockchip,rk3399-pcie-ep";
+            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>;
+            reg-names = "apb-base", "mem-base";
+            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+            clock-names = "aclk", "aclk-perf",
+                    "hclk", "pm";
+            max-functions = /bits/ 8 <8>;
+            num-lanes = <4>;
+            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+                    "pm", "pclk", "aclk";
+            phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+            phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+            rockchip,max-outbound-regions = <16>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie_clkreqnb_cpm>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
new file mode 100644
index 0000000000..531008f0b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Root Port Bridge Host
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: axi-base
+      - const: apb-base
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: legacy
+      - const: client
+
+  aspm-no-l0s:
+    description: This property is needed if using 24MHz OSC for RC's PHY.
+
+  ep-gpios:
+    description: pre-reset GPIO
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie1v8-supply:
+    description: The 1.8v regulator to use for PCIe.
+
+  vpcie0v9-supply:
+    description: The 0.9v regulator to use for PCIe.
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+required:
+  - ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-controller
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@f8000000 {
+            compatible = "rockchip,rk3399-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+            clock-names = "aclk", "aclk-perf",
+                    "hclk", "pm";
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+                  <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+                  <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+            interrupt-names = "sys", "legacy", "client";
+            ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+            ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+                0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+            num-lanes = <4>;
+            msi-map = <0x0 &its 0x0 0x1000>;
+            reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
+            reg-names = "axi-base", "apb-base";
+            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+                    "pm", "pclk", "aclk";
+            /* deprecated legacy PHY model */
+            phys = <&pcie_phy>;
+            phy-names = "pcie-phy";
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie_clkreq>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+                <0 0 0 2 &pcie0_intc 1>,
+                <0 0 0 3 &pcie0_intc 2>,
+                <0 0 0 4 &pcie0_intc 3>;
+
+            pcie0_intc: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000000..1ae8dcfa07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3568-pcie
+      - items:
+          - enum:
+              - rockchip,rk3588-pcie
+          - const: rockchip,rk3568-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Rockchip designed configuration registers
+      - description: Config registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: apb
+      - const: config
+
+  clocks:
+    minItems: 5
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+      - description: PIPE clock
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+      - const: pipe
+
+  interrupts:
+    items:
+      - description:
+          Combined system interrupt, which is used to signal the following
+          interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme,
+          hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi,
+          edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app
+      - description:
+          Combined PM interrupt, which is used to signal the following
+          interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2,
+          linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2,
+          linkst_out_l0s, pm_dstate_update
+      - description:
+          Combined message interrupt, which is used to signal the following
+          interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi,
+          pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
+      - description:
+          Combined legacy interrupt, which is used to signal the following
+          interrupts - inta, intb, intc, intd
+      - description:
+          Combined error interrupt, which is used to signal the following
+          interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
+          tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
+          nf_err_rx, f_err_rx, radm_qoverflow
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: pmc
+      - const: msg
+      - const: legacy
+      - const: err
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    additionalProperties: false
+    properties:
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+      interrupt-controller: true
+
+      interrupts:
+        items:
+          - description: combined legacy interrupt
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+      - interrupts
+
+  msi-map: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - const: pipe
+      - items:
+          - const: pwr
+          - const: pipe
+
+  vpcie3v3-supply: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x2: pcie@fe280000 {
+            compatible = "rockchip,rk3568-pcie";
+            reg = <0x3 0xc0800000 0x0 0x390000>,
+                  <0x0 0xfe280000 0x0 0x10000>,
+                  <0x3 0x80000000 0x0 0x100000>;
+            reg-names = "dbi", "apb", "config";
+            bus-range = <0x20 0x2f>;
+            clocks = <&cru 143>, <&cru 144>,
+                     <&cru 145>, <&cru 146>,
+                     <&cru 147>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux";
+            device_type = "pci";
+            interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+            linux,pci-domain = <2>;
+            max-link-speed = <2>;
+            msi-map = <0x2000 &its 0x2000 0x1000>;
+            num-lanes = <2>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power 15>;
+            ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+            resets = <&cru 193>;
+            reset-names = "pipe";
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            legacy-interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
new file mode 100644
index 0000000000..f20ed7e709
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe Host Controller
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+description: |+
+  Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: samsung,exynos5433-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: External Local Bus interface (ELBI) registers.
+      - description: PCIe configuration space region.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe bridge clock
+      - description: PCIe bus clock
+
+  clock-names:
+    items:
+      - const: pcie
+      - const: pcie_bus
+
+  phys:
+    maxItems: 1
+
+  vdd10-supply:
+    description:
+      Phandle to a regulator that provides 1.0V power to the PCIe block.
+
+  vdd18-supply:
+    description:
+      Phandle to a regulator that provides 1.8V power to the PCIe block.
+
+  num-lanes:
+    const: 1
+
+  num-viewport:
+    const: 3
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - num-viewport
+  - clocks
+  - clock-names
+  - phys
+  - vdd10-supply
+  - vdd18-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos5433.h>
+
+    pcie: pcie@15700000 {
+        compatible = "samsung,exynos5433-pcie";
+        reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>;
+        reg-names = "dbi", "elbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+        clock-names = "pcie", "pcie_bus";
+        phys = <&pcie_phy>;
+        pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+        pinctrl-names = "default";
+        num-lanes = <1>;
+        num-viewport = <3>;
+        bus-range = <0x00 0xff>;
+        ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+                 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+        vdd10-supply = <&ldo6_reg>;
+        vdd18-supply = <&ldo7_reg>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
new file mode 100644
index 0000000000..844fc71423
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 PCIe host controller
+
+description: |+
+  SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Greentime Hu <greentime.hu@sifive.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: sifive,fu740-pcie
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: mgmt
+
+  dma-coherent: true
+
+  num-lanes:
+    const: 8
+
+  msi-parent: true
+
+  interrupt-names:
+    items:
+      - const: msi
+      - const: inta
+      - const: intb
+      - const: intc
+      - const: intd
+
+  resets:
+    description: A phandle to the PCIe power up reset line.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
+  pwren-gpios:
+    description: Should specify the GPIO for controlling the PCI bus device power on.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - dma-coherent
+  - num-lanes
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+  - resets
+  - pwren-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        #include <dt-bindings/clock/sifive-fu740-prci.h>
+
+        pcie@e00000000 {
+            compatible = "sifive,fu740-pcie";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            reg = <0xe 0x00000000 0x0 0x80000000>,
+                  <0xd 0xf0000000 0x0 0x10000000>,
+                  <0x0 0x100d0000 0x0 0x1000>;
+            reg-names = "dbi", "config", "mgmt";
+            device_type = "pci";
+            dma-coherent;
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000  0x0 0x60080000  0x0 0x60080000 0x0 0x10000>,      /* I/O */
+                     <0x82000000  0x0 0x60090000  0x0 0x60090000 0x0 0xff70000>,    /* mem */
+                     <0x82000000  0x0 0x70000000  0x0 0x70000000 0x0 0x1000000>,    /* mem */
+                     <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>;  /* mem prefetchable */
+            num-lanes = <0x8>;
+            interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
+            interrupt-names = "msi", "inta", "intb", "intc", "intd";
+            interrupt-parent = <&plic0>;
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+                            <0x0 0x0 0x0 0x2 &plic0 58>,
+                            <0x0 0x0 0x0 0x3 &plic0 59>,
+                            <0x0 0x0 0x0 0x4 &plic0 60>;
+            clock-names = "pcie_aux";
+            clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
+            resets = <&prci 4>;
+            pwren-gpios = <&gpio 5 0>;
+            reset-gpios = <&gpio 8 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
new file mode 100644
index 0000000000..d87e134968
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+  Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+  properties.
+
+select: false
+
+properties:
+  reg:
+    description:
+      DWC PCIe CSR space is normally accessed over the dedicated Data Bus
+      Interface - DBI. In accordance with the reference manual the register
+      configuration space belongs to the Configuration-Dependent Module (CDM)
+      and is split up into several sub-parts Standard PCIe configuration
+      space, Port Logic Registers (PL), Shadow Config-space Registers,
+      iATU/eDMA registers. The particular sub-space is selected by the
+      CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such
+      configuration provides a flexible interface for the system engineers to
+      either map the particular space at a desired MMIO address or just leave
+      them in a contiguous memory space if pure Native or AXI Bridge DBI access
+      is selected. Note the PCIe CFG-space, PL and Shadow registers are
+      specific for each activated function, while the rest of the sub-spaces
+      are common for all of them (if there are more than one).
+    minItems: 2
+    maxItems: 6
+
+  reg-names:
+    minItems: 2
+    maxItems: 6
+
+  interrupts:
+    description:
+      There are two main sub-blocks which are normally capable of
+      generating interrupts. It's System Information Interface and MSI
+      interface. While the former one has some common for the Host and
+      Endpoint controllers IRQ-signals, the later interface is obviously
+      Root Complex specific since it's responsible for the incoming MSI
+      messages signalling. The System Information IRQ signals are mainly
+      responsible for reporting the generic PCIe hierarchy and Root
+      Complex events like VPD IO request, general AER, PME, Hot-plug, link
+      bandwidth change, link equalization request, INTx asserted/deasserted
+      Message detection, embedded DMA Tx/Rx/Error.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+
+  clocks:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the clocks required
+      to get the controller working correctly. In general all of them can
+      be divided into two groups':' application and core clocks. Note the
+      platforms may have some of the clock sources unspecified in case if the
+      corresponding domains are fed up from a common clock source.
+    minItems: 1
+    maxItems: 7
+
+  clock-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Data Bus Interface (DBI) clock. Clock signal for the AXI-bus
+            interface of the Configuration-Dependent Module, which is
+            basically the set of the controller CSRs.
+          const: dbi
+        - description:
+            Application AXI-bus Master interface clock. Basically this is
+            a clock for the controller DMA interface (PCI-to-CPU).
+          const: mstr
+        - description:
+            Application AXI-bus Slave interface clock. This is a clock for
+            the CPU-to-PCI memory IO interface.
+          const: slv
+        - description:
+            Controller Core-PCS PIPE interface clock. It's normally
+            supplied by an external PCS-PHY.
+          const: pipe
+        - description:
+            Controller Primary clock. It's assumed that all controller input
+            signals (except resets) are synchronous to this clock.
+          const: core
+        - description:
+            Auxiliary clock for the controller PMC domain. The controller
+            partitioning implies having some parts to operate with this
+            clock in some power management states.
+          const: aux
+        - description:
+            Generic reference clock. In case if there are several
+            interfaces fed up with a common clock source it's advisable to
+            define it with this name (for instance pipe, core and aux can
+            be connected to a single source of the periodic signal).
+          const: ref
+        - description:
+            Clock for the PHY registers interface. Originally this is
+            a PHY-viewport-based interface, but some platform may have
+            specifically designed one.
+          const: phy_reg
+        - description:
+            Vendor-specific clock names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'dbi' clock for details
+              enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+            - description: See native 'mstr/slv' clock for details
+              enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
+            - description: See native 'pipe' clock for details
+              enum: [ pcie_phy, pcie_phy_ref, link ]
+            - description: See native 'aux' clock for details
+              enum: [ pcie_aux ]
+            - description: See native 'ref' clock for details.
+              enum: [ gio ]
+            - description: See nativs 'phy_reg' clock for details
+              enum: [ pcie_apb_phy, pclk ]
+
+  resets:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the reset
+      signals required to be de-asserted to properly activate the controller
+      sub-parts. All of these signals can be divided into two sub-groups':'
+      application and core resets with respect to the main sub-domains they
+      are supposed to reset. Note the platforms may have some of these signals
+      unspecified in case if they are automatically handled or aggregated into
+      a comprehensive control module.
+    minItems: 1
+    maxItems: 10
+
+  reset-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      oneOf:
+        - description: Data Bus Interface (DBI) domain reset
+          const: dbi
+        - description: AXI-bus Master interface reset
+          const: mstr
+        - description: AXI-bus Slave interface reset
+          const: slv
+        - description: Application-dependent interface reset
+          const: app
+        - description: Controller Non-sticky CSR flags reset
+          const: non-sticky
+        - description: Controller sticky CSR flags reset
+          const: sticky
+        - description: PIPE-interface (Core-PCS) logic reset
+          const: pipe
+        - description:
+            Controller primary reset (resets everything except PMC module)
+          const: core
+        - description: PCS/PHY block reset
+          const: phy
+        - description: PMC hot reset signal
+          const: hot
+        - description: Cold reset signal
+          const: pwr
+        - description:
+            Vendor-specific reset names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'app' reset for details
+              enum: [ apps, gio, apb ]
+            - description: See native 'phy' reset for details
+              enum: [ pciephy, link ]
+            - description: See native 'pwr' reset for details
+              enum: [ turnoff ]
+
+  phys:
+    description:
+      There can be up to the number of possible lanes PHYs specified placed in
+      the phandle array in the line-based order. Obviously each the specified
+      PHYs are supposed to be able to work in the PCIe mode with a speed
+      implied by the DWC PCIe controller they are attached to.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    minItems: 1
+    maxItems: 16
+    oneOf:
+      - description: Generic PHY names
+        items:
+          pattern: '^pcie[0-9]+$'
+      - description:
+          Vendor-specific PHY names. Consider using the generic
+          names above for new bindings.
+        items:
+          oneOf:
+            - pattern: '^pcie(-?phy[0-9]*)?$'
+            - pattern: '^p2u-[0-7]$'
+
+  reset-gpio:
+    deprecated: true
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  max-link-speed:
+    maximum: 5
+
+  num-lanes:
+    description:
+      Number of PCIe link lanes to use. Can be omitted if the already brought
+      up link is supposed to be preserved.
+    maximum: 16
+
+  num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound address translation windows. This parameter can be
+      auto-detected based on the iATU memory writability. So there is no
+      point in having a dedicated DT-property for it.
+    maximum: 256
+
+  num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of inbound address translation windows. In the same way as
+      for the outbound AT windows, this parameter can be auto-detected based
+      on the iATU memory writability. There is no point having a dedicated
+      DT-property for it either.
+    maximum: 256
+
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound view ports configured in hardware. It's the same as
+      the number of outbound AT windows.
+    maximum: 256
+
+  snps,enable-cdm-check:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable automatic checking of CDM (Configuration Dependent Module)
+      registers for data corruption. CDM registers include standard PCIe
+      configuration space registers, Port Logic registers, DMA and iATU
+      registers. This feature has been available since DWC PCIe v4.80a.
+
+  dma-coherent: true
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
new file mode 100644
index 0000000000..8fc2151691
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe endpoint interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller endpoint
+
+# Please create a separate DT-schema for your DWC PCIe Endpoint controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie-ep
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+properties:
+  reg:
+    description:
+      DBI, DBI2 reg-spaces and outbound memory window are required for the
+      normal controller functioning. iATU memory IO region is also required
+      if the space is unrolled (IP-core version >= 4.80a).
+    minItems: 2
+    maxItems: 5
+
+  reg-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to
+            generate various application-specific traffic on the PCIe bus
+            hierarchy. It's usage scenario depends on the endpoint
+            functionality, for instance it can be used to create MSI(X)
+            messages.
+          const: addr_space
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ link, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: addr_space
+
+  interrupts:
+    description:
+      There is no mandatory IRQ signals for the normal controller functioning,
+      but in addition to the native set the platforms may have a link- or
+      PM-related IRQs specified.
+    minItems: 1
+    maxItems: 20
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 20
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+
+  max-functions:
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: true
+
+examples:
+  - |
+    pcie-ep@dfd00000 {
+      compatible = "snps,dw-pcie-ep";
+      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+            <0xdfc01000 0x0001000>, /* IP registers 2 */
+            <0xd0000000 0x2000000>; /* Configuration space */
+      reg-names = "dbi", "dbi2", "addr_space";
+
+      interrupts = <23>, <24>;
+      interrupt-names = "dma0", "dma1";
+
+      clocks = <&sys_clk 12>, <&sys_clk 24>;
+      clock-names = "dbi", "ref";
+
+      resets = <&sys_rst 12>, <&sys_rst 24>;
+      reset-names = "dbi", "phy";
+
+      phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
+      phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
+
+      max-link-speed = <3>;
+      max-functions = /bits/ 8 <4>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 0000000000..8bbdeb8821
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller
+
+# Please create a separate DT-schema for your DWC PCIe Root Port controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+  - if:
+      not:
+        required:
+          - msi-map
+    then:
+      properties:
+        interrupt-names:
+          contains:
+            const: msi
+
+properties:
+  reg:
+    description:
+      At least DBI reg-space and peripheral devices CFG-space outbound window
+      are required for the normal controller work. iATU memory IO region is
+      also required if the space is unrolled (IP-core version >= 4.80a).
+    minItems: 2
+    maxItems: 5
+
+  reg-names:
+    minItems: 2
+    maxItems: 5
+    items:
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to access
+            the peripheral PCIe devices configuration space.
+          const: config
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ apb, mgmt, link, ulreg, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+            - description: Syscon-related CSR regions.
+              enum: [ smu, mpu ]
+            - description: Tegra234 aperture
+              enum: [ ecam ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: config
+
+  interrupts:
+    description:
+      DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+      signal is supposed to be specified for the host controller.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+            no more MSI interrupt pending. The interrupt is relevant to the
+            iMSI-RX - Integrated MSI Receiver (AXI bridge).
+          const: msi
+        - description:
+            Legacy A/B/C/D interrupt signal. Basically it's triggered by
+            receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+            from the downstream device.
+          pattern: "^int(a|b|c|d)$"
+        - description:
+            Error condition detected and a flag is set in the Root Error Status
+            register of the AER capability. It's asserted when the RC
+            internally generated an error or an error message is received by
+            the RC.
+          const: aer
+        - description:
+            PME message is received by the port. That means having the PME
+            status bit set in the Root Status register (the event is
+            supposed to be unmasked in the Root Control register).
+          const: pme
+        - description:
+            Hot-plug event is detected. That is a bit has been set in the
+            Slot Status register and the corresponding event is enabled in
+            the Slot Control register.
+          const: hp
+        - description:
+            Link Autonomous Bandwidth Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_au
+        - description:
+            Bandwidth Management Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_mg
+        - description:
+            Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for
+            details.
+          const: legacy
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr, sys, pmc, msg, err ]
+
+additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+examples:
+  - |
+    pcie@dfc00000 {
+      compatible = "snps,dw-pcie";
+      device_type = "pci";
+      reg = <0xdfc00000 0x0001000>, /* IP registers */
+            <0xd0000000 0x0002000>; /* Configuration space */
+      reg-names = "dbi", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <25>, <24>;
+      interrupt-names = "msi", "hp";
+      #interrupt-cells = <1>;
+
+      reset-gpios = <&port0 0 1>;
+
+      phys = <&pcie_phy>;
+      phy-names = "pcie";
+
+      num-lanes = <1>;
+      max-link-speed = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
new file mode 100644
index 0000000000..f0d8e486a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe endpoint controller
+
+description: |
+  UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-pcie-ep
+      - socionext,uniphier-nx1-pcie-ep
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: link
+      - const: addr_space
+      - const: atu
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+  num-ib-windows:
+    const: 16
+
+  num-ob-windows:
+    const: 16
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-pcie-ep
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pcie_ep: pcie-ep@66000000 {
+        compatible = "socionext,uniphier-pro5-pcie-ep";
+        reg-names = "dbi", "dbi2", "link", "addr_space";
+        reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+              <0x66010000 0x10000>, <0x67000000 0x400000>;
+        clock-names = "gio", "link";
+        clocks = <&sys_clk 12>, <&sys_clk 24>;
+        reset-names = "gio", "link";
+        resets = <&sys_rst 12>, <&sys_rst 24>;
+        num-ib-windows = <16>;
+        num-ob-windows = <16>;
+        num-lanes = <4>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 0000000000..638b99db04
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+  UniPhier PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pcie
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: dbi
+      - const: link
+      - const: config
+      - const: atu
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-viewport: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        gic: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+    pcie: pcie@66000000 {
+        compatible = "socionext,uniphier-pcie";
+        reg-names = "dbi", "link", "config";
+        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&sys_clk 24>;
+        resets = <&sys_rst 24>;
+        num-lanes = <1>;
+        num-viewport = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
+                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+        #interrupt-cells = <1>;
+        interrupt-names = "dma", "msi";
+        interrupt-parent = <&gic>;
+        interrupts = <0 224 4>, <0 225 4>;
+        interrupt-map-mask = <0 0 0  7>;
+        interrupt-map = <0 0 0  1  &pcie_intc 0>,
+                        <0 0 0  2  &pcie_intc 1>,
+                        <0 0 0  3  &pcie_intc 2>,
+                        <0 0 0  4  &pcie_intc 3>;
+
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <0 226 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
new file mode 100644
index 0000000000..d5a14f5dad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
@@ -0,0 +1,14 @@
+SPEAr13XX PCIe DT detail:
+================================
+
+SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
+controller.
+
+Required properties:
+- compatible	    : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys		    : phandle to PHY node associated with PCIe controller
+- phy-names	    : must be "pcie-phy"
+- All other definitions as per generic PCI bindings
+
+ Optional properties:
+- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
new file mode 100644
index 0000000000..74195c1f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Endpoint
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: pci-ep.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: addr_space
+      - const: atu
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+  interrupts:
+    minItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - power-domains
+  - ti,syscon-pcie-mode
+  - dma-coherent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_ep: pcie-ep@5500000 {
+        compatible = "ti,am654-pcie-ep";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x8000000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "addr_space", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
new file mode 100644
index 0000000000..a20dccbafd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Host
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-rc
+      - ti,keystone-pcie
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: config
+      - const: atu
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
+    description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
+
+  ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+  msi-map: true
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - ti,syscon-pcie-id
+  - ti,syscon-pcie-mode
+  - ranges
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am654-pcie-rc
+then:
+  required:
+    - dma-coherent
+    - power-domains
+    - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    pcie0_rc: pcie@5500000 {
+        compatible = "ti,am654-pcie-rc";
+        reg =  <0x5500000 0x1000>,
+               <0x5501000 0x1000>,
+               <0x10000000 0x2000>,
+               <0x5506000 0x1000>;
+        reg-names = "app", "dbics", "config", "atu";
+        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
+                 <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+        bus-range = <0x0 0xff>;
+        max-link-speed = <2>;
+        dma-coherent;
+        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+        msi-map = <0x0 &gic_its 0x0 0x10000>;
+        device_type = "pci";
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 0000000000..62292185fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: cdns-pcie-ep.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in AM64
+        items:
+          - const: ti,am64-pcie-ep
+          - const: ti,j721e-pcie-ep
+      - description: PCIe EP controller in J7200
+        items:
+          - const: ti,j7200-pcie-ep
+          - const: ti,j721e-pcie-ep
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: mem
+
+  ti,syscon-pcie-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Specifier for configuring PCIe mode and link speed.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: clock-specifier to represent input to the PCIe
+
+  clock-names:
+    items:
+      - const: fck
+
+  dma-coherent:
+    description: Indicates that the PCIe IP block can ensure the coherency
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - max-functions
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_ep: pcie-ep@d000000 {
+           compatible = "ti,j721e-pcie-ep";
+           reg = <0x00 0x02900000 0x00 0x1000>,
+                 <0x00 0x02907000 0x00 0x400>,
+                 <0x00 0x0d000000 0x00 0x00800000>,
+                 <0x00 0x10000000 0x00 0x08000000>;
+           reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+           ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+           max-link-speed = <3>;
+           num-lanes = <2>;
+           power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 239 1>;
+           clock-names = "fck";
+           max-functions = /bits/ 8 <6>;
+           dma-coherent;
+           phys = <&serdes0_pcie_link>;
+           phy-names = "pcie-phy";
+       };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 0000000000..a2c5eaea57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+  - $ref: cdns-pcie-host.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-pcie-host
+      - description: PCIe controller in AM64
+        items:
+          - const: ti,am64-pcie-host
+          - const: ti,j721e-pcie-host
+      - description: PCIe controller in J7200
+        items:
+          - const: ti,j7200-pcie-host
+          - const: ti,j721e-pcie-host
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: intd_cfg
+      - const: user_cfg
+      - const: reg
+      - const: cfg
+
+  ti,syscon-pcie-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
+    description: Specifier for configuring PCIe mode and link speed.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description: |+
+      clock-specifier to represent input to the PCIe for 1 item.
+      2nd item if present represents reference clock to the connector.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: pcie_refclk
+
+  dma-coherent: true
+
+  vendor-id:
+    const: 0x104c
+
+  device-id:
+    enum:
+      - 0xb00d
+      - 0xb00f
+      - 0xb010
+      - 0xb013
+
+  msi-map: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,syscon-pcie-ctrl
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - clocks
+  - clock-names
+  - vendor-id
+  - device-id
+  - msi-map
+  - dma-ranges
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_rc: pcie@2900000 {
+            compatible = "ti,j721e-pcie-host";
+            reg = <0x00 0x02900000 0x00 0x1000>,
+                  <0x00 0x02907000 0x00 0x400>,
+                  <0x00 0x0d000000 0x00 0x00800000>,
+                  <0x00 0x10000000 0x00 0x00001000>;
+            reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+            ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+            max-link-speed = <3>;
+            num-lanes = <2>;
+            power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 239 1>;
+            clock-names = "fck";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0xf>;
+            vendor-id = <0x104c>;
+            device-id = <0xb00d>;
+            msi-map = <0x0 &gic_its 0x0 0x10000>;
+            dma-coherent;
+            reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+            phys = <&serdes0_pcie_link>;
+            phy-names = "pcie-phy";
+            ranges = <0x01000000 0x0 0x10001000  0x00 0x10001000  0x0 0x0010000>,
+                     <0x02000000 0x0 0x10011000  0x00 0x10011000  0x0 0x7fef000>;
+            dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
new file mode 100644
index 0000000000..8147e3e3e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -0,0 +1,102 @@
+TI PCI Controllers
+
+PCIe DesignWare Controller
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+	       Should be "ti,dra7-pcie-ep" for EP (deprecated)
+	       Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+	       Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+	       Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+	       Should be "ti,dra726-pcie-ep" for dra72x in EP mode
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+	       number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+	       where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../snps,dw-pcie.yaml
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+			module and the register offset to specify lane
+			selection.
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI-specific registers
+	       The second entry must be "rc-dbics" for the DesignWare PCIe
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
+ - interrupts : Two interrupt entries must be specified. The first one is for
+		main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+   #size-cells,
+   #interrupt-cells,
+   device_type,
+   ranges,
+   interrupt-map-mask,
+   interrupt-map : as specified in ../snps,dw-pcie.yaml
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
+
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI-specific registers
+	       "ep_dbics" for the standard configuration registers as
+		they are locally accessed within the DIF CS space
+	       "ep_dbics2" for the standard configuration registers as
+		they are locally accessed within the DIF CS2 space
+	       "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
+
+Optional Property:
+ - gpios : Should be added if a GPIO line is required to drive PERST# line
+
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
+
+Example:
+axi {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0x51000000 0x51000000 0x3000
+		  0x0	     0x20000000 0x10000000>;
+	pcie@51000000 {
+		compatible = "ti,dra7-pcie";
+		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+		reg-names = "rc_dbics", "ti_conf", "config";
+		interrupts = <0 232 0x4>, <0 233 0x4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x03000 0 0x00010000
+			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+		ti,hwmods = "pcie1";
+		phys = <&pcie1_phy>;
+		phy-names = "pcie-phy0";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
new file mode 100644
index 0000000000..53da2edd7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC PCIe Host Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: toshiba,visconti-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+      - description: Visconti specific additional registers.
+      - description: Visconti specific SMU registers
+      - description: Visconti specific memory protection unit registers (MPU)
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: ulreg
+      - const: smu
+      - const: mpu
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: PCIe reference clock
+      - description: PCIe system clock
+      - description: Auxiliary clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: core
+      - const: aux
+
+  num-lanes:
+    const: 2
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - num-lanes
+  - clocks
+  - clock-names
+  - max-link-speed
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@28400000 {
+            compatible = "toshiba,visconti-pcie";
+            reg = <0x0 0x28400000 0x0 0x00400000>,
+                  <0x0 0x70000000 0x0 0x10000000>,
+                  <0x0 0x28050000 0x0 0x00010000>,
+                  <0x0 0x24200000 0x0 0x00002000>,
+                  <0x0 0x24162000 0x0 0x00001000>;
+            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            device_type = "pci";
+            bus-range = <0x00 0xff>;
+            num-lanes = <2>;
+            num-viewport = <8>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
+                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map =
+                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
+            clock-names = "ref", "core", "aux";
+            max-link-speed = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
new file mode 100644
index 0000000000..11063293f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -0,0 +1,76 @@
+V3 Semiconductor V360 EPC PCI bridge
+
+This bridge is found in the ARM Integrator/AP (Application Platform)
+
+Required properties:
+- compatible: should be one of:
+  "v3,v360epc-pci"
+  "arm,integrator-ap-pci", "v3,v360epc-pci"
+- reg: should contain two register areas:
+  first the base address of the V3 host bridge controller, 64KB
+  second the configuration area register space, 16MB
+- interrupts: should contain a reference to the V3 error interrupt
+  as routed on the system.
+- bus-range: see pci.txt
+- ranges: this follows the standard PCI bindings in the IEEE Std
+  1275-1994 (see pci.txt) with the following restriction:
+  - The non-prefetchable and prefetchable memory windows must
+    each be exactly 256MB (0x10000000) in size.
+  - The prefetchable memory window must be immediately adjacent
+    to the non-prefetcable memory window
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+  be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
+  64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
+  as pre-fetchable. Two ranges are supported by the hardware.
+
+Integrator-specific required properties:
+- syscon: should contain a link to the syscon device node, since
+  on the Integrator, some registers in the syscon are required to
+  operate the V3 host bridge.
+
+Example:
+
+pci: pciv3@62000000 {
+	compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+	interrupt-parent = <&pic>;
+	interrupts = <17>; /* Bus error IRQ */
+	clocks = <&pciclk>;
+	bus-range = <0x00 0xff>;
+	ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
+		0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
+		0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+		0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+		0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+		0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+	dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+		0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+		0x02000000 0 0x80000000 /* Core module alias memory */
+		0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+	interrupt-map-mask = <0xf800 0 0 0x7>;
+	interrupt-map = <
+	/* IDSEL 9 */
+	0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+	0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+	0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+	0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+	/* IDSEL 10 */
+	0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+	0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+	0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+	0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+	/* IDSEL 11 */
+	0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+	0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+	0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+	0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+	/* IDSEL 12 */
+	0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+	0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+	0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+	0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+	>;
+};
diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml
new file mode 100644
index 0000000000..09748ef6b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Platform Baseboard PCI interface
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  PCI host controller found on the ARM Versatile PB board's FPGA.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-pci
+
+  reg:
+    items:
+      - description: Versatile-specific registers
+      - description: Self Config space
+      - description: Config space
+
+  ranges:
+    maxItems: 3
+
+  "#interrupt-cells": true
+
+  interrupt-map:
+    maxItems: 16
+
+  interrupt-map-mask:
+    items:
+      - const: 0x1800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@10001000 {
+      compatible = "arm,versatile-pci";
+      device_type = "pci";
+      reg = <0x10001000 0x1000>,
+            <0x41000000 0x10000>,
+            <0x42000000 0x100000>;
+      bus-range = <0 0xff>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      #interrupt-cells = <1>;
+
+      ranges =
+          <0x01000000 0 0x00000000 0x43000000 0 0x00010000>,  /* downstream I/O */
+          <0x02000000 0 0x50000000 0x50000000 0 0x10000000>,  /* non-prefetchable memory */
+          <0x42000000 0 0x60000000 0x60000000 0 0x10000000>;  /* prefetchable memory */
+
+      interrupt-map-mask = <0x1800 0 0 7>;
+      interrupt-map = <0x1800 0 0 1 &sic 28>,
+          <0x1800 0 0 2 &sic 29>,
+          <0x1800 0 0 3 &sic 30>,
+          <0x1800 0 0 4 &sic 27>,
+
+          <0x1000 0 0 1 &sic 27>,
+          <0x1000 0 0 2 &sic 28>,
+          <0x1000 0 0 3 &sic 29>,
+          <0x1000 0 0 4 &sic 30>,
+
+          <0x0800 0 0 1 &sic 30>,
+          <0x0800 0 0 2 &sic 27>,
+          <0x0800 0 0 3 &sic 28>,
+          <0x0800 0 0 4 &sic 29>,
+
+          <0x0000 0 0 1 &sic 29>,
+          <0x0000 0 0 2 &sic 30>,
+          <0x0000 0 0 3 &sic 27>,
+          <0x0000 0 0 4 &sic 28>;
+    };
+
+
+...
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
new file mode 100644
index 0000000000..85d9b95234
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -0,0 +1,68 @@
+* AppliedMicro X-Gene v1 PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "apm,xgene1-msi" to identify
+	      X-Gene v1 PCIe MSI controller block.
+- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
+- reg: physical base address (0x79000000) and length (0x900000) for controller
+       registers. These registers include the MSI termination address and data
+       registers as well as the MSI interrupt status registers.
+- reg-names: not required
+- interrupts: A list of 16 interrupt outputs of the controller, starting from
+	      interrupt number 0x10 to 0x1f.
+- interrupt-names: not required
+
+Each PCIe node needs to have property msi-parent that points to an MSI
+controller node
+
+Examples:
+
+SoC DTSI:
+
+	+ MSI node:
+	msi@79000000 {
+		compatible = "apm,xgene1-msi";
+		msi-controller;
+		reg = <0x00 0x79000000 0x0 0x900000>;
+		interrupts = 	<0x0 0x10 0x4>
+				<0x0 0x11 0x4>
+				<0x0 0x12 0x4>
+				<0x0 0x13 0x4>
+				<0x0 0x14 0x4>
+				<0x0 0x15 0x4>
+				<0x0 0x16 0x4>
+				<0x0 0x17 0x4>
+				<0x0 0x18 0x4>
+				<0x0 0x19 0x4>
+				<0x0 0x1a 0x4>
+				<0x0 0x1b 0x4>
+				<0x0 0x1c 0x4>
+				<0x0 0x1d 0x4>
+				<0x0 0x1e 0x4>
+				<0x0 0x1f 0x4>;
+	};
+
+	+ PCIe controller node with msi-parent property pointing to MSI node:
+	pcie0: pcie@1f2b0000 {
+		device_type = "pci";
+		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+		reg-names = "csr", "cfg";
+		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		dma-coherent;
+		clocks = <&pcie0clk 0>;
+		msi-parent= <&msi>;
+	};
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
new file mode 100644
index 0000000000..92490330dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -0,0 +1,50 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
+- device_type: set to "pci"
+- compatible: should contain "apm,xgene-pcie" to identify the core.
+- reg: A list of physical base address and length for each set of controller
+       registers. Must contain an entry for each entry in the reg-names
+       property.
+- reg-names: Must include the following entries:
+  "csr": controller configuration registers.
+  "cfg": PCIe configuration space registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- ranges: ranges for the outbound memory, I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+	to define the mapping of the PCIe interface to interrupt
+	numbers.
+- clocks: from common clock binding: handle to pci clock.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if DMA operations are coherent
+
+Example:
+
+	pcie0: pcie@1f2b0000 {
+		status = "disabled";
+		device_type = "pci";
+		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+		reg-names = "csr", "cfg";
+		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		dma-coherent;
+		clocks = <&pcie0clk 0>;
+	};
+
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
new file mode 100644
index 0000000000..4734be456b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-versal-cpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CPM Host Controller device tree for Xilinx Versal SoCs
+
+maintainers:
+  - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-cpm-host-1.00
+      - xlnx,versal-cpm5-host
+
+  reg:
+    items:
+      - description: CPM system level control and status registers.
+      - description: Configuration space region and bridge registers.
+      - description: CPM5 control and status registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: cpm_slcr
+      - const: cfg
+      - const: cpm_csr
+    minItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  msi-map:
+    description:
+      Maps a Requester ID to an MSI controller and associated MSI sideband data.
+
+  ranges:
+    maxItems: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+      "#interrupt-cells":
+        const: 1
+      "interrupt-controller": true
+    additionalProperties: false
+
+required:
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - bus-range
+  - msi-map
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    versal {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cpm_pcie: pcie@fca10000 {
+                       compatible = "xlnx,versal-cpm-host-1.00";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                                       <0 0 0 2 &pcie_intc_0 1>,
+                                       <0 0 0 3 &pcie_intc_0 2>,
+                                       <0 0 0 4 &pcie_intc_0 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x0 0xfca10000 0x0 0x1000>,
+                             <0x6 0x00000000 0x0 0x10000000>;
+                       reg-names = "cpm_slcr", "cfg";
+                       pcie_intc_0: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+               cpm5_pcie: pcie@fcdd0000 {
+                       compatible = "xlnx,versal-cpm5-host";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+                                       <0 0 0 2 &pcie_intc_1 1>,
+                                       <0 0 0 3 &pcie_intc_1 2>,
+                                       <0 0 0 4 &pcie_intc_1 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x00 0xfcdd0000 0x00 0x1000>,
+                             <0x06 0x00000000 0x00 0x1000000>,
+                             <0x00 0xfce20000 0x00 0x1000000>;
+                       reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+                       pcie_intc_1: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
+    };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
new file mode 100644
index 0000000000..69b7decabd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,axi-pcie-host-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    items:
+      - description: |
+          ranges for the PCI memory regions (I/O space region is not
+          supported by hardware)
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pcie@50000000 {
+        compatible = "xlnx,axi-pcie-host-1.00.a";
+        reg = <0x50000000 0x1000000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &pcie_intc 1>,
+                        <0 0 0 2 &pcie_intc 2>,
+                        <0 0 0 3 &pcie_intc 3>,
+                        <0 0 0 4 &pcie_intc 4>;
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>;
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #address-cells = <0>;
+            #interrupt-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
new file mode 100644
index 0000000000..897602559b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx NWL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,nwl-pcie-2.11
+
+  reg:
+    items:
+      - description: PCIe bridge registers location.
+      - description: PCIe Controller registers location.
+      - description: PCIe Configuration space region.
+
+  reg-names:
+    items:
+      - const: breg
+      - const: pcireg
+      - const: cfg
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received
+      - description: unused interrupt(dummy)
+      - description: interrupt asserted when a legacy interrupt is received
+      - description: msi1 interrupt asserted when an MSI is received
+      - description: msi0 interrupt asserted when an MSI is received
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: dummy
+      - const: intx
+      - const: msi1
+      - const: msi0
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  "#interrupt-cells":
+    const: 1
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-map:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent:
+    description: optional, only needed if DMA operations are coherent.
+
+  clocks:
+    maxItems: 1
+    description: optional, input clock specifier.
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+      "interrupt-controller": true
+
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-controller
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        nwl_pcie: pcie@fd0e0000 {
+            compatible = "xlnx,nwl-pcie-2.11";
+            reg = <0x0 0xfd0e0000 0x0 0x1000>,
+                  <0x0 0xfd480000 0x0 0x1000>,
+                  <0x80 0x00000000 0x0 0x1000000>;
+            reg-names = "breg", "pcireg", "cfg";
+            ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                     <0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            msi-controller;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "dummy", "intx", "msi1", "msi0";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+                            <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+                            <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+                            <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+            msi-parent = <&nwl_pcie>;
+            power-domains = <&zynqmp_firmware PD_PCIE>;
+            iommus = <&smmu 0x4d0>;
+            pcie_intc: legacy-interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml b/Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml
new file mode 100644
index 0000000000..087e02a9ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/nuvoton,npcm-peci.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/nuvoton,npcm-peci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton PECI Bus
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-peci
+      - nuvoton,npcm845-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the APB clock.
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    peci-controller@f0100000 {
+      compatible = "nuvoton,npcm750-peci";
+      reg = <0xf0100000 0x200>;
+      interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk NPCM7XX_CLK_APB3>;
+      cmd-timeout-ms = <1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
new file mode 100644
index 0000000000..b01e0c8b96
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed PECI Bus
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-peci
+      - aspeed,ast2500-peci
+      - aspeed,ast2600-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the external
+      oscillator clock.
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+  clock-frequency:
+    description:
+      The desired operation frequency of PECI controller in Hz.
+    minimum: 2000
+    maximum: 2000000
+    default: 1000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+    peci-controller@1e78b000 {
+      compatible = "aspeed,ast2600-peci";
+      reg = <0x1e78b000 0x100>;
+      interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+      resets = <&syscon ASPEED_RESET_PECI>;
+      cmd-timeout-ms = <1000>;
+      clock-frequency = <1000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/peci/peci-controller.yaml b/Documentation/devicetree/bindings/peci/peci-controller.yaml
new file mode 100644
index 0000000000..d7853291b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic for PECI
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+
+description:
+  PECI (Platform Environment Control Interface) is an interface that provides a
+  communication channel from Intel processors and chipset components to external
+  monitoring or control devices.
+
+properties:
+  $nodename:
+    pattern: "^peci-controller(@.*)?$"
+
+  cmd-timeout-ms:
+    description:
+      Command timeout in units of ms.
+
+additionalProperties: true
+
+examples:
+  - |
+    peci-controller@1e78b000 {
+      reg = <0x1e78b000 0x100>;
+      cmd-timeout-ms = <500>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
new file mode 100644
index 0000000000..4adab01491
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/amlogic,g12-ddr-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12 DDR performance monitor
+
+maintainers:
+  - Jiucheng Xu <jiucheng.xu@amlogic.com>
+
+description: |
+  Amlogic G12 series SoC integrate DDR bandwidth monitor.
+  A timer is inside and can generate interrupt when timeout.
+  The bandwidth is counted in the timer ISR. Different platform
+  has different subset of event format attribute.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,g12a-ddr-pmu
+      - amlogic,g12b-ddr-pmu
+      - amlogic,sm1-ddr-pmu
+
+  reg:
+    items:
+      - description: DMC bandwidth register space.
+      - description: DMC PLL register space.
+
+  interrupts:
+    items:
+      - description: The IRQ of the inside timer timeout.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pmu {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@ff638000 {
+            compatible = "amlogic,g12a-ddr-pmu";
+            reg = <0x0 0xff638000 0x0 0x100>,
+                  <0x0 0xff638c00 0x0 0x100>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
new file mode 100644
index 0000000000..afb11cf693
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt
@@ -0,0 +1,112 @@
+* APM X-Gene SoC PMU bindings
+
+This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
+The following PMU devices are supported:
+
+  L3C			- L3 cache controller
+  IOB			- IO bridge
+  MCB			- Memory controller bridge
+  MC			- Memory controller
+
+The following section describes the SoC PMU DT node binding.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-pmu" for revision 1 or
+                          "apm,xgene-pmu-v2" for revision 2.
+- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
+- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
+- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
+- reg			: First resource shall be the CPU bus PMU resource.
+- interrupts            : Interrupt-specifier for PMU IRQ.
+
+Required properties for L3C subnode:
+- compatible		: Shall be "apm,xgene-pmu-l3c".
+- reg			: First resource shall be the L3C PMU resource.
+
+Required properties for IOB subnode:
+- compatible		: Shall be "apm,xgene-pmu-iob".
+- reg			: First resource shall be the IOB PMU resource.
+
+Required properties for MCB subnode:
+- compatible		: Shall be "apm,xgene-pmu-mcb".
+- reg			: First resource shall be the MCB PMU resource.
+- enable-bit-index	: The bit indicates if the according MCB is enabled.
+
+Required properties for MC subnode:
+- compatible		: Shall be "apm,xgene-pmu-mc".
+- reg			: First resource shall be the MC PMU resource.
+- enable-bit-index	: The bit indicates if the according MC is enabled.
+
+Example:
+	csw: csw@7e200000 {
+		compatible = "apm,xgene-csw", "syscon";
+		reg = <0x0 0x7e200000 0x0 0x1000>;
+	};
+
+	mcba: mcba@7e700000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e700000 0x0 0x1000>;
+	};
+
+	mcbb: mcbb@7e720000 {
+		compatible = "apm,xgene-mcb", "syscon";
+		reg = <0x0 0x7e720000 0x0 0x1000>;
+	};
+
+	pmu: pmu@78810000 {
+		compatible = "apm,xgene-pmu-v2";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		regmap-csw = <&csw>;
+		regmap-mcba = <&mcba>;
+		regmap-mcbb = <&mcbb>;
+		reg = <0x0 0x78810000 0x0 0x1000>;
+		interrupts = <0x0 0x22 0x4>;
+
+		pmul3c@7e610000 {
+			compatible = "apm,xgene-pmu-l3c";
+			reg = <0x0 0x7e610000 0x0 0x1000>;
+		};
+
+		pmuiob@7e940000 {
+			compatible = "apm,xgene-pmu-iob";
+			reg = <0x0 0x7e940000 0x0 0x1000>;
+		};
+
+		pmucmcb@7e710000 {
+			compatible = "apm,xgene-pmu-mcb";
+			reg = <0x0 0x7e710000 0x0 0x1000>;
+			enable-bit-index = <0>;
+		};
+
+		pmucmcb@7e730000 {
+			compatible = "apm,xgene-pmu-mcb";
+			reg = <0x0 0x7e730000 0x0 0x1000>;
+			enable-bit-index = <1>;
+		};
+
+		pmucmc@7e810000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e810000 0x0 0x1000>;
+			enable-bit-index = <0>;
+		};
+
+		pmucmc@7e850000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e850000 0x0 0x1000>;
+			enable-bit-index = <1>;
+		};
+
+		pmucmc@7e890000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e890000 0x0 0x1000>;
+			enable-bit-index = <2>;
+		};
+
+		pmucmc@7e8d0000 {
+			compatible = "apm,xgene-pmu-mc";
+			reg = <0x0 0x7e8d0000 0x0 0x1000>;
+			enable-bit-index = <3>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/perf/arm,ccn.yaml b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
new file mode 100644
index 0000000000..0b0bb20910
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,ccn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCN (Cache Coherent Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,ccn-502
+      - arm,ccn-504
+      - arm,ccn-508
+      - arm,ccn-512
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ccn@20000000 {
+        compatible = "arm,ccn-504";
+        reg = <0x20000000 0x1000000>;
+        interrupts = <0 181 4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
new file mode 100644
index 0000000000..2e51072e79
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,cmn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CMN (Coherent Mesh Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,cmn-600
+      - arm,cmn-650
+      - arm,cmn-700
+      - arm,ci-700
+
+  reg:
+    items:
+      - description: Physical address of the base (PERIPHBASE) and
+          size of the configuration address space.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Overflow interrupt for DTC0
+      - description: Overflow interrupt for DTC1
+      - description: Overflow interrupt for DTC2
+      - description: Overflow interrupt for DTC3
+    description: One interrupt for each DTC domain implemented must
+      be specified, in order. DTC0 is always present.
+
+  arm,root-node:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset from PERIPHBASE of CMN-600's configuration
+      discovery node (see TRM definition of ROOTNODEBASE). Not
+      relevant for newer CMN/CI products.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,cmn-600
+then:
+  required:
+    - arm,root-node
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmu@50000000 {
+        compatible = "arm,cmn-600";
+        reg = <0x50000000 0x4000000>;
+        /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        arm,root-node = <0x104000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
new file mode 100644
index 0000000000..a740378ed5
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description:
+  ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared
+  L3 memory system, control logic and external interfaces to form a multicore
+  cluster. The PMU enables gathering various statistics on the operation of the
+  DSU. The PMU provides independent 32-bit counters that can count any of the
+  supported events, along with a 64-bit cycle counter. The PMU is accessed via
+  CPU system registers and has no MMIO component.
+
+properties:
+  compatible:
+    oneOf:
+      - const: arm,dsu-pmu
+      - items:
+          - const: arm,dsu-110-pmu
+          - const: arm,dsu-pmu
+
+  interrupts:
+    items:
+      - description: nCLUSTERPMUIRQ interrupt
+
+  cpus:
+    minItems: 1
+    maxItems: 12
+    description: List of phandles for the CPUs connected to this DSU instance.
+
+required:
+  - compatible
+  - interrupts
+  - cpus
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml
new file mode 100644
index 0000000000..a4b53a6a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,smmu-v3-pmcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm SMMUv3 Performance Monitor Counter Group
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description: |
+  An SMMUv3 may have several Performance Monitor Counter Group (PMCG).
+  They are standalone performance monitoring units that support both
+  architected and IMPLEMENTATION DEFINED event counters.
+
+properties:
+  $nodename:
+    pattern: "^pmu@[0-9a-f]*"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mmu-600-pmcg
+          - const: arm,smmu-v3-pmcg
+      - const: arm,smmu-v3-pmcg
+
+  reg:
+    items:
+      - description: Register page 0
+      - description: Register page 1, if SMMU_PMCG_CFGR.RELOC_CTRS = 1
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - interrupts
+  - required:
+      - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmu@2b420000 {
+            compatible = "arm,smmu-v3-pmcg";
+            reg = <0x2b420000 0x1000>,
+                  <0x2b430000 0x1000>;
+            interrupts = <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>;
+            msi-parent = <&its 0xff0000>;
+    };
+
+    pmu@2b440000 {
+            compatible = "arm,smmu-v3-pmcg";
+            reg = <0x2b440000 0x1000>,
+                  <0x2b450000 0x1000>;
+            interrupts = <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>;
+            msi-parent = <&its 0xff0000>;
+    };
diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
new file mode 100644
index 0000000000..e9fad4b3de
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale(NXP) IMX8/9 DDR performance monitor
+
+maintainers:
+  - Frank Li <frank.li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8-ddr-pmu
+          - fsl,imx8m-ddr-pmu
+          - fsl,imx8mq-ddr-pmu
+          - fsl,imx8mm-ddr-pmu
+          - fsl,imx8mn-ddr-pmu
+          - fsl,imx8mp-ddr-pmu
+          - fsl,imx93-ddr-pmu
+      - items:
+          - enum:
+              - fsl,imx8mm-ddr-pmu
+              - fsl,imx8mn-ddr-pmu
+              - fsl,imx8mq-ddr-pmu
+              - fsl,imx8mp-ddr-pmu
+          - const: fsl,imx8m-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ddr-pmu@5c020000 {
+        compatible = "fsl,imx8-ddr-pmu";
+        reg = <0x5c020000 0x10000>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml
new file mode 100644
index 0000000000..a18dd0a8c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K DDR performance monitor
+
+maintainers:
+  - Bharat Bhushan <bbhushan2@marvell.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - marvell,cn10k-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@87e1c0000000 {
+            compatible = "marvell,cn10k-ddr-pmu";
+            reg = <0x87e1 0xc0000000 0x0 0x10000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
new file mode 100644
index 0000000000..3621422526
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K LLC-TAD performance monitor
+
+maintainers:
+  - Bhaskara Budiredla <bbudiredla@marvell.com>
+
+description: |
+  The Tag-and-Data units (TADs) maintain coherence and contain CN10K
+  shared on-chip last level cache (LLC). The tad pmu measures the
+  performance of last-level cache. Each tad pmu supports up to eight
+  counters.
+
+  The DT setup comprises of number of tad blocks, the sizes of pmu
+  regions, tad blocks and overall base address of the HW.
+
+properties:
+  compatible:
+    const: marvell,cn10k-tad-pmu
+
+  reg:
+    maxItems: 1
+
+  marvell,tad-cnt:
+    description: specifies the number of tads on the soc
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-page-size:
+    description: specifies the size of each tad page
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,tad-pmu-page-size:
+    description: specifies the size of page that the pmu uses
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - marvell,tad-cnt
+  - marvell,tad-page-size
+  - marvell,tad-pmu-page-size
+
+additionalProperties: false
+
+examples:
+  - |
+
+    tad {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        tad_pmu@80000000 {
+            compatible = "marvell,cn10k-tad-pmu";
+            reg = <0x87e2 0x80000000 0x0 0x1000>;
+            marvell,tad-cnt = <1>;
+            marvell,tad-page-size = <0x1000>;
+            marvell,tad-pmu-page-size = <0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/riscv,pmu.yaml b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
new file mode 100644
index 0000000000..c8448de2f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/riscv,pmu.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/riscv,pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V SBI PMU events
+
+maintainers:
+  - Atish Patra <atishp@rivosinc.com>
+
+description: |
+  The SBI PMU extension allows supervisor software to configure, start and
+  stop any performance counter at anytime. Thus, a user can leverage all
+  capabilities of performance analysis tools, such as perf, if the SBI PMU
+  extension is enabled. The following constraints apply:
+
+    The platform must provide information about PMU event to counter mappings
+    either via device tree or another way, specific to the platform.
+    Without the event to counter mappings, the SBI PMU extension cannot be used.
+
+    Platforms should provide information about the PMU event selector values
+    that should be encoded in the expected value of MHPMEVENTx while configuring
+    MHPMCOUNTERx for that specific event. The can either be done via device tree
+    or another way, specific to the platform.
+    The exact value to be written to MHPMEVENTx is completely dependent on the
+    platform.
+
+    For information on the SBI specification see the section "Performance
+    Monitoring Unit Extension" of:
+      https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/riscv-sbi.adoc
+
+properties:
+  compatible:
+    const: riscv,pmu
+
+  riscv,event-to-mhpmevent:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description:
+      Represents an ONE-to-ONE mapping between a PMU event and the event
+      selector value that the platform expects to be written to the MHPMEVENTx
+      CSR for that event.
+      The mapping is encoded in an matrix format where each element represents
+      an event.
+      This property shouldn't encode any raw hardware event.
+    items:
+      items:
+        - description: event_idx, a 20-bit wide encoding of the event type and
+            code. Refer to the SBI specification for a complete description of
+            the event types and codes.
+        - description: upper 32 bits of the event selector value for MHPMEVENTx
+        - description: lower 32 bits of the event selector value for MHPMEVENTx
+
+  riscv,event-to-mhpmcounters:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description:
+      Represents a MANY-to-MANY mapping between a range of events and all the
+      MHPMCOUNTERx in a bitmap format that can be used to monitor these range
+      of events. The information is encoded in an matrix format where each
+      element represents a certain range of events and corresponding counters.
+      This property shouldn't encode any raw event.
+    items:
+      items:
+        - description: first event_idx of the range of events
+        - description: last event_idx of the range of events
+        - description: bitmap of MHPMCOUNTERx for this event
+
+  riscv,raw-event-to-mhpmcounters:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description:
+      Represents an ONE-to-MANY or MANY-to-MANY mapping between the rawevent(s)
+      and all the MHPMCOUNTERx in a bitmap format that can be used to monitor
+      that raw event.
+      The encoding of the raw events are platform specific. The information is
+      encoded in a matrix format where each element represents the specific raw
+      event(s).
+      If a platform directly encodes each raw PMU event as a unique ID, the
+      value of variant must be 0xffffffff_ffffffff.
+    items:
+      items:
+        - description:
+            upper 32 invariant bits for the range of events
+        - description:
+            lower 32 invariant bits for the range of events
+        - description:
+            upper 32 bits of the variant bit mask for the range of events
+        - description:
+            lower 32 bits of the variant bit mask for the range of events
+        - description:
+            bitmap of all MHPMCOUNTERx that can monitor the range of events
+
+dependencies:
+  "riscv,event-to-mhpmevent": [ "riscv,event-to-mhpmcounters" ]
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmu {
+        compatible = "riscv,pmu";
+        riscv,event-to-mhpmevent = <0x0000B 0x0000 0x0001>;
+        riscv,event-to-mhpmcounters = <0x00001 0x00001 0x00000001>,
+                                      <0x00002 0x00002 0x00000004>,
+                                      <0x00003 0x0000A 0x00000ff8>,
+                                      <0x10000 0x10033 0x000ff000>;
+        riscv,raw-event-to-mhpmcounters =
+            /* For event ID 0x0002 */
+            <0x0000 0x0002 0xffffffff 0xffffffff 0x00000f8>,
+            /* For event ID 0-4 */
+            <0x0 0x0 0xffffffff 0xfffffff0 0x00000ff0>,
+            /* For event ID 0xffffffff0000000f - 0xffffffff000000ff */
+            <0xffffffff 0x0 0xffffffff 0xffffff0f 0x00000ff0>;
+    };
+
+  - |
+    /*
+     * For HiFive Unmatched board the encodings can be found here
+     * https://sifive.cdn.prismic.io/sifive/1a82e600-1f93-4f41-b2d8-86ed8b16acba_fu740-c000-manual-v1p6.pdf
+     *
+     * This example also binds standard SBI PMU hardware IDs to U74 PMU event
+     * codes, U74 uses a bitfield for events encoding, so several U74 events
+     * can be bound to a single perf ID.
+     * See SBI PMU hardware IDs in arch/riscv/include/asm/sbi.h
+     */
+    pmu {
+          compatible = "riscv,pmu";
+          riscv,event-to-mhpmevent =
+              /* SBI_PMU_HW_CACHE_REFERENCES -> Instruction or Data cache/ITIM busy */
+              <0x00003 0x00000000 0x1801>,
+              /* SBI_PMU_HW_CACHE_MISSES -> Instruction or Data cache miss or MMIO access */
+              <0x00004 0x00000000 0x0302>,
+              /* SBI_PMU_HW_BRANCH_INSTRUCTIONS -> Conditional branch retired */
+              <0x00005 0x00000000 0x4000>,
+              /* SBI_PMU_HW_BRANCH_MISSES -> Branch or jump misprediction */
+              <0x00006 0x00000000 0x6001>,
+              /* L1D_READ_MISS -> Data cache miss or MMIO access */
+              <0x10001 0x00000000 0x0202>,
+              /* L1D_WRITE_ACCESS -> Data cache write-back */
+              <0x10002 0x00000000 0x0402>,
+              /* L1I_READ_ACCESS -> Instruction cache miss */
+              <0x10009 0x00000000 0x0102>,
+              /* LL_READ_MISS -> UTLB miss */
+              <0x10011 0x00000000 0x2002>,
+              /* DTLB_READ_MISS -> Data TLB miss */
+              <0x10019 0x00000000 0x1002>,
+              /* ITLB_READ_MISS-> Instruction TLB miss */
+              <0x10021 0x00000000 0x0802>;
+          riscv,event-to-mhpmcounters = <0x00003 0x00006 0x18>,
+                                        <0x10001 0x10002 0x18>,
+                                        <0x10009 0x10009 0x18>,
+                                        <0x10011 0x10011 0x18>,
+                                        <0x10019 0x10019 0x18>,
+                                        <0x10021 0x10021 0x18>;
+          riscv,raw-event-to-mhpmcounters = <0x0 0x0 0xffffffff 0xfc0000ff 0x18>,
+                                            <0x0 0x1 0xffffffff 0xfff800ff 0x18>,
+                                            <0x0 0x2 0xffffffff 0xffffe0ff 0x18>;
+    };
diff --git a/Documentation/devicetree/bindings/perf/spe-pmu.yaml b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
new file mode 100644
index 0000000000..7d74152f43
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/spe-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+
+description:
+  ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
+  performance sample data using an in-memory trace buffer.
+
+properties:
+  compatible:
+    const: arm,statistical-profiling-extension-v1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      The PPI to signal SPE events. For heterogeneous systems where SPE is only
+      supported on a subset of the CPUs, please consult the arm,gic-v3 binding
+      for details on describing a PPI partition.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spe-pmu {
+        compatible = "arm,statistical-profiling-extension-v1";
+        interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
new file mode 100644
index 0000000000..4fff091bd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-usb-phy
+      - allwinner,sun7i-a20-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    maxItems: 1
+    description: USB PHY bus clock
+
+  clock-names:
+    const: usb_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    usbphy: phy@1c13400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun4i-a10-usb-phy";
+        reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+        reg-names = "phy_ctrl", "pmu1", "pmu2";
+        clocks = <&ccu CLK_USB_PHY>;
+        clock-names = "usb_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>;
+        reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+        usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+        usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+        usb0_vbus-supply = <&reg_usb0_vbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
new file mode 100644
index 0000000000..f557feca97
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-usb-phy
+      - allwinner,sun50i-a64-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU1 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu1
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun50i-a64-usb-phy";
+        reg = <0x01c19400 0x14>,
+              <0x01c1a800 0x4>,
+              <0x01c1b800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu1";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>;
+        clock-names = "usb0_phy",
+                      "usb1_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>;
+        reset-names = "usb0_reset",
+                      "usb1_reset";
+        usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
new file mode 100644
index 0000000000..4480fdedd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun50i-h6-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU3 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu3
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb3_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb3_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb3_vbus-supply:
+    description: Regulator controlling USB3 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    phy@5100400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun50i-h6-usb-phy";
+        reg = <0x05100400 0x24>,
+              <0x05101800 0x4>,
+              <0x05311800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu3";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY3>;
+        clock-names = "usb0_phy",
+                      "usb3_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY3>;
+        reset-names = "usb0_reset",
+                      "usb3_reset";
+        usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+        usb0_vbus-supply = <&reg_vcc5v>;
+        usb3_vbus-supply = <&reg_vcc5v>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
new file mode 100644
index 0000000000..cf4eed2305
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Ondrej Jirman <megous@megous.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 USB3 PHY
+
+maintainers:
+  - Ondrej Jirman <megous@megous.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun50i-h6-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+    phy@5210000 {
+          compatible = "allwinner,sun50i-h6-usb3-phy";
+          reg = <0x5210000 0x10000>;
+          clocks = <&ccu CLK_USB_PHY1>;
+          resets = <&ccu RST_USB_PHY1>;
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
new file mode 100644
index 0000000000..1563e3df30
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun5i-a13-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+
+  clocks:
+    maxItems: 1
+    description: USB OTG PHY bus clock
+
+  clock-names:
+    const: usb_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun5i-ccu.h>
+    #include <dt-bindings/reset/sun5i-ccu.h>
+
+    phy@1c13400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun5i-a13-usb-phy";
+        reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
+        reg-names = "phy_ctrl", "pmu1";
+        clocks = <&ccu CLK_USB_PHY0>;
+        clock-names = "usb_phy";
+        resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+        reset-names = "usb0_reset", "usb1_reset";
+        usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+        usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+        usb0_vbus-supply = <&reg_usb0_vbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
new file mode 100644
index 0000000000..6a4fd49299
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI D-PHY Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-dphy
+      - const: allwinner,sun50i-a100-mipi-dphy
+      - items:
+          - const: allwinner,sun50i-a64-mipi-dphy
+          - const: allwinner,sun6i-a31-mipi-dphy
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dphy
+          - const: allwinner,sun50i-a100-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  allwinner,direction:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Direction of the D-PHY:
+      - "rx" for receiving (e.g. when used with MIPI CSI-2);
+      - "tx" for transmitting (e.g. when used with MIPI DSI).
+
+    enum:
+      - tx
+      - rx
+    default: tx
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dphy0: d-phy@1ca1000 {
+        compatible = "allwinner,sun6i-a31-mipi-dphy";
+        reg = <0x01ca1000 0x1000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu 23>, <&ccu 97>;
+        clock-names = "bus", "mod";
+        resets = <&ccu 4>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
new file mode 100644
index 0000000000..4897a3d2fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun6i-a31-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+    #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun6i-a31-usb-phy";
+        reg = <0x01c19400 0x10>,
+              <0x01c1a800 0x4>,
+              <0x01c1b800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu1",
+                    "pmu2";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_PHY2>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset";
+        usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+        usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
new file mode 100644
index 0000000000..99de9c6889
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun8i-a23-usb-phy
+      - allwinner,sun8i-a33-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-a23-usb-phy";
+        reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+        reg-names = "phy_ctrl", "pmu1";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>;
+        clock-names = "usb0_phy",
+                      "usb1_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>;
+        reset-names = "usb0_reset",
+                      "usb1_reset";
+        usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
new file mode 100644
index 0000000000..73438d84de
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-a83t-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+      - description: USB HSIC 12MHz clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+      - const: usb2_hsic_12M
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-a83t-usb-phy";
+        reg = <0x01c19400 0x10>,
+              <0x01c1a800 0x14>,
+              <0x01c1b800 0x14>;
+        reg-names = "phy_ctrl",
+                    "pmu1",
+                    "pmu2";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_HSIC>,
+                 <&ccu CLK_USB_HSIC_12M>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy",
+                      "usb2_hsic_12M";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_HSIC>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset";
+        usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
new file mode 100644
index 0000000000..2df012d136
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H3 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun8i-h3-usb-phy
+      - allwinner,sun50i-h616-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+      - description: PHY PMU3 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu1
+      - const: pmu2
+      - const: pmu3
+
+  clocks:
+    minItems: 4
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+      - description: USB Host 2 PHY bus clock
+      - description: PMU clock for host port 2
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+      - const: usb3_phy
+      - const: pmu2_clk
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+      - description: USB Host 3 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+      - const: usb3_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+  usb3_vbus-supply:
+    description: Regulator controlling USB3 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-usb-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+
+        clock-names:
+          maxItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-h3-usb-phy";
+        reg = <0x01c19400 0x2c>,
+              <0x01c1a800 0x4>,
+              <0x01c1b800 0x4>,
+              <0x01c1c800 0x4>,
+              <0x01c1d800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu1",
+                    "pmu2",
+                    "pmu3";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_PHY2>,
+                 <&ccu CLK_USB_PHY3>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy",
+                      "usb3_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>,
+                 <&ccu RST_USB_PHY3>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset",
+                      "usb3_reset";
+        usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+        usb0_vbus-supply = <&reg_usb0_vbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+        usb3_vbus-supply = <&reg_usb3_vbus>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
new file mode 100644
index 0000000000..2dd31630c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-r40-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+    phy@1c13400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-r40-usb-phy";
+        reg = <0x01c13400 0x14>,
+              <0x01c14800 0x4>,
+              <0x01c19800 0x4>,
+              <0x01c1c800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu1",
+                    "pmu2";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_PHY2>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset";
+        usb1_vbus-supply = <&reg_vcc5v0>;
+        usb2_vbus-supply = <&reg_vcc5v0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
new file mode 100644
index 0000000000..395d33855d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner V3s USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-v3s-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+
+  clocks:
+    maxItems: 1
+    description: USB OTG PHY bus clock
+
+  clock-names:
+    const: usb0_phy
+
+  resets:
+    maxItems: 1
+    description: USB OTG reset
+
+  reset-names:
+    const: usb0_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-v3s-usb-phy";
+        reg = <0x01c19400 0x2c>,
+              <0x01c1a800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0";
+        clocks = <&ccu CLK_USB_PHY0>;
+        clock-names = "usb0_phy";
+        resets = <&ccu RST_USB_PHY0>;
+        reset-names = "usb0_reset";
+        usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
new file mode 100644
index 0000000000..bd9445f6f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    anyOf:
+      - maxItems: 1
+        description: Main PHY Clock
+
+      - items:
+          - description: Main PHY clock
+          - description: HSIC 12MHz clock
+          - description: HSIC 480MHz clock
+
+  clock-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic_12M
+          - const: hsic_480M
+
+  resets:
+    minItems: 1
+    items:
+      - description: Normal USB PHY reset
+      - description: HSIC Reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: hsic
+
+  phy_type:
+    const: hsic
+    description:
+      When absent, the PHY type will be assumed to be normal USB.
+
+  phy-supply:
+    description:
+      Regulator that powers VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+if:
+  properties:
+    phy_type:
+      const: hsic
+
+  required:
+    - phy_type
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 2
+
+    reset-names:
+      maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy1: phy@a00800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a00800 0x4>;
+        clocks = <&usb_clocks CLK_USB0_PHY>;
+        clock-names = "phy";
+        resets = <&usb_clocks RST_USB0_PHY>;
+        reset-names = "phy";
+        phy-supply = <&reg_usb1_vbus>;
+        #phy-cells = <0>;
+    };
+
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy3: phy@a02800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a02800 0x4>;
+        clocks = <&usb_clocks CLK_USB2_PHY>,
+                 <&usb_clocks CLK_USB_HSIC>,
+                 <&usb_clocks CLK_USB2_HSIC>;
+        clock-names = "phy",
+                      "hsic_12M",
+                      "hsic_480M";
+        resets = <&usb_clocks RST_USB2_PHY>,
+                 <&usb_clocks RST_USB2_HSIC>;
+        reset-names = "phy",
+                      "hsic";
+        phy_type = "hsic";
+        phy-supply = <&reg_usb3_vbus>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml
new file mode 100644
index 0000000000..9488394992
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,suniv-f1c100s-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner F1C100s USB PHY
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,suniv-f1c100s-usb-phy
+
+  reg:
+    maxItems: 1
+    description: PHY Control registers
+
+  reg-names:
+    const: phy_ctrl
+
+  clocks:
+    maxItems: 1
+    description: USB OTG PHY bus clock
+
+  clock-names:
+    const: usb0_phy
+
+  resets:
+    maxItems: 1
+    description: USB OTG reset
+
+  reset-names:
+    const: usb0_reset
+
+  usb0_id_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    maxItems: 1
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+    #include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
+    phy@1c13400 {
+        compatible = "allwinner,suniv-f1c100s-usb-phy";
+        reg = <0x01c13400 0x10>;
+        reg-names = "phy_ctrl";
+        clocks = <&ccu CLK_USB_PHY0>;
+        clock-names = "usb0_phy";
+        resets = <&ccu RST_USB_PHY0>;
+        reset-names = "usb0_reset";
+        #phy-cells = <1>;
+        usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
new file mode 100644
index 0000000000..64795f170f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,axg-mipi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG MIPI D-PHY
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,axg-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  "#phy-cells":
+    const: 0
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: analog
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@ff640000 {
+            compatible = "amlogic,axg-mipi-dphy";
+            reg = <0xff640000 0x100>;
+            clocks = <&clk_mipi_dsi_phy>;
+            clock-names = "pclk";
+            resets = <&reset_phy>;
+            reset-names = "phy";
+            phys = <&mipi_pcie_analog_dphy>;
+            phy-names = "analog";
+            #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
new file mode 100644
index 0000000000..c8c83acfb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12A MIPI analog PHY
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+  compatible:
+    const: amlogic,g12a-mipi-dphy-analog
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@0 {
+          compatible = "amlogic,g12a-mipi-dphy-analog";
+          reg = <0x0 0xc>;
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
new file mode 100644
index 0000000000..0031fb6a4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb2-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,g12a-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12A USB2 PHY
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,g12a-usb2-phy
+      - amlogic,a1-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  "#phy-cells":
+    const: 0
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+if:
+  properties:
+    compatible:
+      enum:
+        - amlogic,meson-a1-usb-ctrl
+
+then:
+  properties:
+    power-domains:
+      maxItems: 1
+  required:
+    - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@36000 {
+          compatible = "amlogic,g12a-usb2-phy";
+          reg = <0x36000 0x2000>;
+          clocks = <&xtal>;
+          clock-names = "xtal";
+          resets = <&phy_reset>;
+          reset-names = "phy";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
new file mode 100644
index 0000000000..1a5a12adb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12A USB3 + PCIE Combo PHY
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,g12a-usb3-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  "#phy-cells":
+    const: 1
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@46000 {
+          compatible = "amlogic,g12a-usb3-pcie-phy";
+          reg = <0x46000 0x2000>;
+          clocks = <&ref_clk>;
+          clock-names = "ref_clk";
+          resets = <&phy_reset>;
+          reset-names = "phy";
+          #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
new file mode 100644
index 0000000000..009a398083
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG shared MIPI/PCIE analog PHY
+
+maintainers:
+  - Remi Pommarel <repk@triplefau.lt>
+
+description: |+
+  The Everything-Else Power Domains node should be the child of a syscon
+  node with the required property:
+
+  - compatible: Should be the following:
+                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: amlogic,axg-mipi-pcie-analog-phy
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mpphy: phy {
+          compatible = "amlogic,axg-mipi-pcie-analog-phy";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
new file mode 100644
index 0000000000..40fbf8ac32
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-pcie.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,meson-axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG PCIE PHY
+
+maintainers:
+  - Remi Pommarel <repk@triplefau.lt>
+
+properties:
+  compatible:
+    const: amlogic,axg-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: analog
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - phys
+  - phy-names
+  - resets
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+    #include <dt-bindings/phy/phy.h>
+    pcie_phy: pcie-phy@ff644000 {
+          compatible = "amlogic,axg-pcie-phy";
+          reg = <0xff644000 0x1c>;
+          resets = <&reset RESET_PCIE_PHY>;
+          phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
+          phy-names = "analog";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-gxl-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-gxl-usb2-phy.yaml
new file mode 100644
index 0000000000..c2f5c9d2fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-gxl-usb2-phy.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,meson-gxl-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GXL USB2 PHY
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    const: amlogic,meson-gxl-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: phy
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: phy
+
+  "#phy-cells":
+    const: 0
+
+  phy-supply: true
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@78000 {
+        compatible = "amlogic,meson-gxl-usb2-phy";
+        reg = <0x78000 0x20>;
+        clocks = <&xtal>;
+        clock-names = "phy";
+        resets = <&phy_reset>;
+        reset-names = "phy";
+        #phy-cells = <0>;
+        phy-supply = <&usb2_supply>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
new file mode 100644
index 0000000000..6f9fd1c953
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8, Meson8b and Meson8m2 HDMI TX PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |+
+  The HDMI TX PHY node should be the child of a syscon node with the
+  required property:
+
+  compatible = "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8b-hdmi-tx-phy
+              - amlogic,meson8m2-hdmi-tx-phy
+          - const: amlogic,meson8-hdmi-tx-phy
+      - const: amlogic,meson8-hdmi-tx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    description:
+      HDMI TMDS clock
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8b-hdmi-tx-phy", "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
new file mode 100644
index 0000000000..df68bfe5f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8-usb2-phy
+              - amlogic,meson8b-usb2-phy
+              - amlogic,meson8m2-usb2-phy
+          - const: amlogic,meson-mx-usb2-phy
+      - const: amlogic,meson-gxbb-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: usb_general
+      - const: usb
+
+  resets:
+    minItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@c0000000 {
+      compatible = "amlogic,meson-gxbb-usb2-phy";
+      reg = <0xc0000000 0x20>;
+      resets = <&reset_usb_phy>;
+      clocks = <&clk_usb_general>, <&reset_usb>;
+      clock-names = "usb_general", "usb";
+      phy-supply = <&usb_vbus>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
new file mode 100644
index 0000000000..e1bb12711f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt
@@ -0,0 +1,76 @@
+* APM X-Gene 15Gbps Multi-purpose PHY nodes
+
+PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
+PHY (pair of lanes) has its own node.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-phy".
+- reg			: PHY memory resource is the SDS PHY access resource.
+- #phy-cells		: Shall be 1 as it expects one argument for setting
+			  the mode of the PHY. Possible values are 0 (SATA),
+			  1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI).
+
+Optional properties:
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+- clocks		: Reference to the clock entry.
+- apm,tx-eye-tuning	: Manual control to fine tune the capture of the serial
+			  bit lines from the automatic calibrated position.
+			  Two set of 3-tuple setting for each (up to 3)
+			  supported link speed on the host. Range from 0 to
+			  127 in unit of one bit period. Default is 10.
+- apm,tx-eye-direction	: Eye tuning manual control direction. 0 means sample
+			  data earlier than the nominal sampling point. 1 means
+			  sample data later than the nominal sampling point.
+			  Two set of 3-tuple setting for each (up to 3)
+			  supported link speed on the host. Default is 0.
+- apm,tx-boost-gain	: Frequency boost AC (LSB 3-bit) and DC (2-bit)
+			  gain control. Two set of 3-tuple setting for each
+			  (up to 3) supported link speed on the host. Range is
+			  between 0 to 31 in unit of dB. Default is 3.
+- apm,tx-amplitude	: Amplitude control. Two set of 3-tuple setting for
+			  each (up to 3) supported link speed on the host.
+			  Range is between 0 to 199500 in unit of uV.
+			  Default is 199500 uV.
+- apm,tx-pre-cursor1	: 1st pre-cursor emphasis taps control. Two set of
+			  3-tuple setting for each (up to 3) supported link
+			  speed on the host. Range is 0 to 273000 in unit of
+			  uV. Default is 0.
+- apm,tx-pre-cursor2	: 2st pre-cursor emphasis taps control. Two set of
+			  3-tuple setting for each (up to 3) supported link
+			  speed on the host. Range is 0 to 127400 in unit uV.
+			  Default is 0x0.
+- apm,tx-post-cursor	: Post-cursor emphasis taps control. Two set of
+			  3-tuple setting for Gen1, Gen2, and Gen3. Range is
+			  between 0 to 0x1f in unit of 18.2mV. Default is 0xf.
+- apm,tx-speed		: Tx operating speed. One set of 3-tuple for each
+			  supported link speed on the host.
+			   0 = 1-2Gbps
+			   1 = 2-4Gbps (1st tuple default)
+			   2 = 4-8Gbps
+			   3 = 8-15Gbps (2nd tuple default)
+			   4 = 2.5-4Gbps
+			   5 = 4-5Gbps
+			   6 = 5-6Gbps
+			   7 = 6-16Gbps (3rd tuple default)
+
+NOTE: PHY override parameters are board specific setting.
+
+Example:
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
new file mode 100644
index 0000000000..426101530a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 2.0 PHY
+
+description: >
+  To initialize USB 2.0 PHY driver needs to setup PLL correctly.
+  To do this it requires passing phandle to the USB PHY reference clock.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,ns-usb2-phy
+
+  reg:
+    anyOf:
+      - maxItems: 1
+        description: PHY control register
+      - maxItems: 1
+        description: iomem address range of DMU (Device Management Unit)
+        deprecated: true
+
+  reg-names:
+    items:
+      - const: dmu
+
+  brcm,syscon-clkset:
+    description: phandle to syscon for clkset register
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    items:
+      - description: USB PHY reference clock
+
+  clock-names:
+    items:
+      - const: phy-ref-clk
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+oneOf:
+  - required:
+      - brcm,syscon-clkset
+  - required:
+      - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm-nsp.h>
+    phy@1800c164 {
+        compatible = "brcm,ns-usb2-phy";
+        reg = <0x1800c164 0x4>;
+        brcm,syscon-clkset = <&clkset>;
+        clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+        clock-names = "phy-ref-clk";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
new file mode 100644
index 0000000000..7fd419db45
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/bcm-ns-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar USB 3.0 PHY
+
+description: |
+  Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+  three known series: Ax, Bx and Cx.
+  Known A0: BCM4707 rev 0
+  Known B0: BCM4707 rev 4, BCM53573 rev 2
+  Known B1: BCM4707 rev 6
+  Known C0: BCM47094 rev 0
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,ns-ax-usb3-phy
+      - brcm,ns-bx-usb3-phy
+
+  reg:
+    description: address of MDIO bus device
+    maxItems: 1
+
+  usb3-dmp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the DMP (Device Management Plugin) syscon
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - usb3-dmp-syscon
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb3-phy@10 {
+            compatible = "brcm,ns-ax-usb3-phy";
+            reg = <0x10>;
+            usb3-dmp-syscon = <&usb3_dmp>;
+            #phy-cells = <0>;
+        };
+    };
+
+    usb3_dmp: syscon@18105000 {
+        reg = <0x18105000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
new file mode 100644
index 0000000000..c0155f842f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
@@ -0,0 +1,36 @@
+Berlin SATA PHY
+---------------
+
+Required properties:
+- compatible: should be one of
+    "marvell,berlin2-sata-phy"
+    "marvell,berlin2q-sata-phy"
+- address-cells: should be 1
+- size-cells: should be 0
+- phy-cells: from the generic PHY bindings, must be 1
+- reg: address and length of the register
+- clocks: reference to the clock entry
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+
+Example:
+	sata_phy: phy@f7e900a0 {
+		compatible = "marvell,berlin2q-sata-phy";
+		reg = <0xf7e900a0 0x200>;
+		clocks = <&chip CLKID_SATA>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#phy-cells = <1>;
+
+		sata-phy@0 {
+			reg = <0>;
+		};
+
+		sata-phy@1 {
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
new file mode 100644
index 0000000000..be33780f66
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
@@ -0,0 +1,16 @@
+* Marvell Berlin USB PHY
+
+Required properties:
+- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy"
+- reg: base address and length of the registers
+- #phys-cells: should be 0
+- resets: reference to the reset controller
+
+Example:
+
+	usb-phy@f774000 {
+		compatible = "marvell,berlin2-usb-phy";
+		reg = <0xf774000 0x128>;
+		#phy-cells = <0>;
+		resets = <&chip 0x104 14>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
new file mode 100644
index 0000000000..bd527f566c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx USBH PHY
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-usbh-phy
+      - brcm,bcm6328-usbh-phy
+      - brcm,bcm6358-usbh-phy
+      - brcm,bcm6362-usbh-phy
+      - brcm,bcm6368-usbh-phy
+      - brcm,bcm63268-usbh-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: usbh
+      - const: usb_ref
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - "#phy-cells"
+
+if:
+  properties:
+    compatible:
+      enum:
+        - brcm,bcm6318-usbh-phy
+        - brcm,bcm6328-usbh-phy
+        - brcm,bcm6362-usbh-phy
+        - brcm,bcm63268-usbh-phy
+then:
+  properties:
+    power-domains:
+      maxItems: 1
+  required:
+    - power-domains
+else:
+  properties:
+    power-domains: false
+
+examples:
+  - |
+    usbh: usb-phy@10001700 {
+      compatible = "brcm,bcm6368-usbh-phy";
+      reg = <0x10001700 0x38>;
+      clocks = <&periph_clk 15>;
+      clock-names = "usbh";
+      resets = <&periph_rst 12>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
new file mode 100644
index 0000000000..580fbe37b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB PHY
+
+description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4908-usb-phy
+      - brcm,bcm7211-usb-phy
+      - brcm,bcm7216-usb-phy
+      - brcm,brcmstb-usb-phy
+
+  reg:
+    minItems: 1
+    items:
+      - description: the base CTRL register
+      - description: XHCI EC register
+      - description: XHCI GBL register
+      - description: USB PHY register
+      - description: USB MDIO register
+      - description: BDC register
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: ctrl
+      - const: xhci_ec
+      - const: xhci_gbl
+      - const: usb_phy
+      - const: usb_mdio
+      - const: bdc_ec
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_usb
+      - const: sw_usb3
+
+  interrupts:
+    description: wakeup interrupt
+
+  interrupt-names:
+    const: wake
+
+  brcm,ipp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Invert Port Power
+    minimum: 0
+    maximum: 1
+
+  brcm,ioc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Invert Over Current detection
+    minimum: 0
+    maximum: 1
+
+  dr_mode:
+    description: PHY Device mode. If this property is not defined, the PHY will
+      default to "host" mode.
+    enum:
+      - host
+      - peripheral
+      - drd
+      - typec-pd
+
+  brcm,syscon-piarbctl:
+    description: phandle to syscon for handling config registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  brcm,has-xhci:
+    description: Indicates the PHY has an XHCI PHY.
+    type: boolean
+
+  brcm,has-eohci:
+    description: Indicates the PHY has an EHCI/OHCI PHY.
+    type: boolean
+
+  "#phy-cells":
+    description: |
+      Cell allows setting the type of the PHY. Possible values are:
+      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+      - PHY_TYPE_USB3 for USB3.x PHY
+    const: 1
+
+required:
+  - reg
+  - "#phy-cells"
+
+anyOf:
+  - required:
+      - brcm,has-xhci
+  - required:
+      - brcm,has-eohci
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm4908-usb-phy
+              - brcm,brcmstb-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7211-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 6
+        reg-names:
+          minItems: 5
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm7216-usb-phy
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    usb-phy@f0470200 {
+        compatible = "brcm,brcmstb-usb-phy";
+        reg = <0xf0470200 0xb8>,
+              <0xf0471940 0x6c0>;
+        #phy-cells = <1>;
+        dr_mode = "host";
+        brcm,ioc = <1>;
+        brcm,ipp = <1>;
+        brcm,has-xhci;
+        brcm,has-eohci;
+        clocks = <&usb20>, <&usb30>;
+        clock-names = "sw_usb", "sw_usb3";
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    usb-phy@29f0200 {
+        compatible = "brcm,bcm7211-usb-phy";
+        reg = <0x29f0200 0x200>,
+              <0x29c0880 0x30>,
+              <0x29cc100 0x534>,
+              <0x2808000 0x24>,
+              <0x2980080 0x8>;
+        reg-names = "ctrl",
+            "xhci_ec",
+            "xhci_gbl",
+            "usb_phy",
+            "usb_mdio";
+        brcm,ioc = <0x0>;
+        brcm,ipp = <0x0>;
+        interrupts = <0x30>;
+        interrupt-parent = <&vpu_intr1_nosec_intc>;
+        interrupt-names = "wake";
+        #phy-cells = <0x1>;
+        brcm,has-xhci;
+        brcm,syscon-piarbctl = <&syscon_piarbctl>;
+        clocks = <&scmi_clk 256>;
+        clock-names = "sw_usb";
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml
new file mode 100644
index 0000000000..808e90b246
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus PCIe PHY
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie[-|_]phy(@.*)?$"
+
+  compatible:
+    items:
+      - const: brcm,cygnus-pcie-phy
+
+  reg:
+    maxItems: 1
+    description: >
+      Base address and length of the PCIe PHY block
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^pcie-phy@[0-9]+$":
+    type: object
+    additionalProperties: false
+    description: >
+      PCIe PHY child nodes
+
+    properties:
+      reg:
+        maxItems: 1
+        description: >
+          The PCIe PHY port number
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie_phy@301d0a0 {
+      compatible = "brcm,cygnus-pcie-phy";
+      reg = <0x0301d0a0 0x14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pcie0_phy: pcie-phy@0 {
+          reg = <0>;
+          #phy-cells = <0>;
+      };
+
+      pcie1_phy: pcie-phy@1 {
+          reg = <1>;
+          #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml
new file mode 100644
index 0000000000..d7faeb81f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,kona-usb2-phy.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,kona-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family USB 2.0 PHY
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,kona-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@3f130000 {
+        compatible = "brcm,kona-usb2-phy";
+        reg = <0x3f130000 0x28>;
+        #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000000..04f063aa78
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
@@ -0,0 +1,30 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+   The below registers must be provided.
+   icfg - for DRD ICFG configurations
+   rst-ctrl - for DRD IDM reset
+   crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+   usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+	usbdrd_phy: phy@66000960 {
+			#phy-cells = <0>;
+			compatible = "brcm,ns2-drd-phy";
+			reg = <0x66000960 0x24>,
+			      <0x67012800 0x4>,
+			      <0x6501d148 0x4>,
+			      <0x664d0700 0x4>;
+			reg-names = "icfg", "rst-ctrl",
+				    "crmu-ctrl", "usb2-strap";
+			id-gpios = <&gpio_g 30 0>;
+			vbus-gpios = <&gpio_g 31 0>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml
new file mode 100644
index 0000000000..527010702f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom NS2 PCIe PHY
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  compatible:
+    const: brcm,ns2-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pci-phy@0 {
+          compatible = "brcm,ns2-pcie-phy";
+          reg = <0x0>;
+          #phy-cells = <0>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
new file mode 100644
index 0000000000..8467c8e636
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 PHY
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^sata[-|_]phy(@.*)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sata-phy
+              - brcm,bcm7425-sata-phy
+              - brcm,bcm7445-sata-phy
+              - brcm,bcm63138-sata-phy
+          - const: brcm,phy-sata3
+      - items:
+          - const: brcm,iproc-nsp-sata-phy
+      - items:
+          - const: brcm,iproc-ns2-sata-phy
+      - items:
+          - const: brcm,iproc-sr-sata-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: phy-ctrl
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^sata-phy@[0-9]+$":
+    type: object
+    description: |
+      Each port's PHY should be represented as a sub-node.
+
+    properties:
+      reg:
+        description: The SATA PHY port number
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+      "brcm,enable-ssc":
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Use spread spectrum clocking (SSC) on this port
+          This property is not applicable for "brcm,iproc-ns2-sata-phy",
+          "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
+
+      "brcm,rxaeq-mode":
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          String that indicates the desired RX equalizer mode.
+        enum:
+          - off
+          - auto
+          - manual
+
+      "brcm,rxaeq-value":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+            When 'brcm,rxaeq-mode' is set to "manual", provides the RX
+            equalizer value that should be used.
+        minimum: 0
+        maximum: 63
+
+      "brcm,tx-amplitude-millivolt":
+        description: |
+            Transmit amplitude voltage in millivolt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [400, 500, 600, 800]
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      const: brcm,iproc-ns2-sata-phy
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    sata_phy@f0458100 {
+        compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+        reg = <0xf0458100 0x1e00>;
+        reg-names = "phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata-phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+        };
+
+        sata-phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
new file mode 100644
index 0000000000..e8d82286be
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
@@ -0,0 +1,41 @@
+Broadcom Stingray PCIe PHY
+
+Required properties:
+- compatible: must be "brcm,sr-pcie-phy"
+- reg: base address and length of the PCIe SS register space
+- brcm,sr-cdru: phandle to the CDRU syscon node
+- brcm,sr-mhb: phandle to the MHB syscon node
+- #phy-cells: Must be 1, denotes the PHY index
+
+For PAXB based root complex, one can have a configuration of up to 8 PHYs
+PHY index goes from 0 to 7
+
+For the internal PAXC based root complex, PHY index is always 8
+
+Example:
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
+
+	cdru: syscon@6641d000 {
+		compatible = "brcm,sr-cdru", "syscon";
+		reg = <0 0x6641d000 0 0x400>;
+	};
+
+	pcie_phy: phy@40000000 {
+		compatible = "brcm,sr-pcie-phy";
+		reg = <0 0x40000000 0 0x800>;
+		brcm,sr-cdru = <&cdru>;
+		brcm,sr-mhb = <&mhb>;
+		#phy-cells = <1>;
+	};
+
+	/* users of the PCIe PHY */
+
+	pcie0: pcie@48000000 {
+		...
+		...
+		phys = <&pcie_phy 0>;
+		phy-names = "pcie-phy";
+	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
new file mode 100644
index 0000000000..4ba298966a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt
@@ -0,0 +1,32 @@
+Broadcom Stingray USB PHY
+
+Required properties:
+ - compatible : should be one of the listed compatibles
+	- "brcm,sr-usb-combo-phy" is combo PHY has two PHYs, one SS and one HS.
+	- "brcm,sr-usb-hs-phy" is a single HS PHY.
+ - reg: offset and length of the PHY blocks registers
+ - #phy-cells:
+   - Must be 1 for brcm,sr-usb-combo-phy as it expects one argument to indicate
+     the PHY number of two PHYs. 0 for HS PHY and 1 for SS PHY.
+   - Must be 0 for brcm,sr-usb-hs-phy.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+	usbphy0: usb-phy@0 {
+		compatible = "brcm,sr-usb-combo-phy";
+		reg = <0x00000000 0x100>;
+		#phy-cells = <1>;
+	};
+
+	usbphy1: usb-phy@10000 {
+		compatible = "brcm,sr-usb-combo-phy";
+		reg = <0x00010000 0x100>,
+		#phy-cells = <1>;
+	};
+
+	usbphy2: usb-phy@20000 {
+		compatible = "brcm,sr-usb-hs-phy";
+		reg = <0x00020000 0x100>,
+		#phy-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
new file mode 100644
index 0000000000..d05a7c7930
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/calxeda-combophy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/calxeda-combophy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Calxeda Highbank Combination PHYs for SATA
+
+description: |
+  The Calxeda Combination PHYs connect the SoC to the internal fabric
+  and to SATA connectors. The PHYs support multiple protocols (SATA,
+  SGMII, PCIe) and can be assigned to different devices (SATA or XGMAC
+  controller).
+  Programming the PHYs is typically handled by those device drivers,
+  not by a dedicated PHY driver.
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+properties:
+  compatible:
+    const: calxeda,hb-combophy
+
+  '#phy-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  phydev:
+    description: device ID for programming the ComboPHY.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 31
+
+required:
+  - compatible
+  - reg
+  - phydev
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    combophy5: combo-phy@fff5d000 {
+                   compatible = "calxeda,hb-combophy";
+                   #phy-cells = <1>;
+                   reg = <0xfff5d000 0x1000>;
+                   phydev = <31>;
+               };
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
new file mode 100644
index 0000000000..6fdd46ad5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,dphy-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DPHY Rx
+
+maintainers:
+  - Pratyush Yadav <pratyush@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: cdns,dphy-rx
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dphy0: phy@4580000 {
+        compatible = "cdns,dphy-rx";
+        reg = <0x4580000 0x1100>;
+        #phy-cells = <0>;
+        power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
new file mode 100644
index 0000000000..6cd9b0f388
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DPHY
+
+maintainers:
+  - Pratyush Yadav <pratyush@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - cdns,dphy
+      - ti,j721e-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PMA state machine clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: psm
+      - const: pll_ref
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dphy0: phy@fd0e0000{
+        compatible = "cdns,dphy";
+        reg = <0xfd0e0000 0x1000>;
+        clocks = <&psm_clk>, <&pll_ref_clk>;
+        clock-names = "psm", "pll_ref";
+        power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
new file mode 100644
index 0000000000..c7281a7c82
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SALVO PHY
+
+maintainers:
+  - Peter Chen <peter.chen@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,salvo-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: salvo_phy_clk
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  cdns,usb2-disconnect-threshold-microvolt:
+    description: The microvolt threshold value utilized for detecting
+      USB disconnection event.
+    enum: [575, 610, 645]
+    default: 575
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    usb3phy: usb3-phy@5b160000 {
+        compatible = "nxp,salvo-phy";
+        reg = <0x5b160000 0x40000>;
+        clocks = <&usb3_lpcg 4>;
+        clock-names = "salvo_phy_clk";
+        power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/dm816x-phy.txt b/Documentation/devicetree/bindings/phy/dm816x-phy.txt
new file mode 100644
index 0000000000..2fe3d11d06
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/dm816x-phy.txt
@@ -0,0 +1,24 @@
+Device tree binding documentation for am816x USB PHY
+=========================
+
+Required properties:
+- compatible : should be "ti,dm816x-usb-phy"
+- reg : offset and length of the PHY register set.
+- reg-names : name for the phy registers
+- clocks : phandle to the clock
+- clock-names : name of the clock
+- syscon: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 1
+- syscon: phandle for the syscon node to access misc registers
+
+Example:
+
+usb_phy0: usb-phy@20 {
+	compatible = "ti,dm8168-usb-phy";
+	reg = <0x20 0x8>;
+	reg-names = "phy";
+	clocks = <&main_fapll 6>;
+	clock-names = "refclk";
+	#phy-cells = <0>;
+	syscon = <&scm_conf>;
+};
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
new file mode 100644
index 0000000000..182a219387
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8 SoC series PCIe PHY
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-phy
+      - fsl,imx8mp-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - items:          # for iMX8MM
+          - const: pciephy
+      - items:          # for IMX8MP
+          - const: pciephy
+          - const: perst
+
+  fsl,refclk-pad-mode:
+    description: |
+      Specifies the mode of the refclk pad used. It can be UNUSED(PHY
+      refclock is derived from SoC internal source), INPUT(PHY refclock
+      is provided externally via the refclk pad) or OUTPUT(PHY refclock
+      is derived from SoC internal source and provided on the refclk pad).
+      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
+      to be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2:
+    description: Gen2 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,clkreq-unsupported:
+    type: boolean
+    description: A boolean property indicating the CLKREQ# signal is
+      not supported in the board design (optional)
+
+  power-domains:
+    description: PCIe PHY  power domain (optional).
+    maxItems: 1
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - fsl,refclk-pad-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    pcie_phy: pcie-phy@32f00000 {
+            compatible = "fsl,imx8mm-pcie-phy";
+            reg = <0x32f00000 0x10000>;
+            clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            clock-names = "ref";
+            assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            assigned-clock-rates = <100000000>;
+            assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+            resets = <&src IMX8MQ_RESET_PCIEPHY>;
+            reset-names = "pciephy";
+            fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+            #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
new file mode 100644
index 0000000000..dc3a3f709f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MQ USB3 PHY
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-usb-phy
+      - fsl,imx8mp-usb-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: phy
+
+  power-domains:
+    maxItems: 1
+
+  vbus-supply:
+    description:
+      A phandle to the regulator for USB VBUS.
+
+  fsl,phy-tx-vref-tune-percent:
+    description:
+      Tunes the HS DC level relative to the nominal level
+    minimum: 94
+    maximum: 124
+
+  fsl,phy-tx-rise-tune-percent:
+    description:
+      Adjusts the rise/fall time duration of the HS waveform relative to
+      its nominal value
+    minimum: 97
+    maximum: 103
+
+  fsl,phy-tx-preemp-amp-tune-microamp:
+    description:
+      Adjust amount of current sourced to DPn and DMn after a J-to-K
+      or K-to-J transition. Default is 0 (disabled).
+    minimum: 0
+    maximum: 1800
+
+  fsl,phy-tx-vboost-level-microvolt:
+    description:
+      Adjust the boosted transmit launch pk-pk differential amplitude
+    minimum: 880
+    maximum: 1120
+
+  fsl,phy-comp-dis-tune-percent:
+    description:
+      Adjust the voltage level used to detect a disconnect event at the host
+      relative to the nominal value
+    minimum: 91
+    maximum: 115
+
+  fsl,phy-pcs-tx-deemph-3p5db-attenuation-db:
+    description:
+      Adjust TX de-emphasis attenuation in dB at nominal
+      3.5dB point as per USB specification
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 36
+
+  fsl,phy-pcs-tx-swing-full-percent:
+    description:
+      Scaling of the voltage defined by fsl,phy-tx-vboost-level-microvolt
+    minimum: 0
+    maximum: 100
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    usb3_phy0: phy@381f0040 {
+        compatible = "fsl,imx8mq-usb-phy";
+        reg = <0x381f0040 0x40>;
+        clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+        clock-names = "phy";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml
new file mode 100644
index 0000000000..8767e48c71
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-lvds-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel LVDS PHY for Freescale i.MX8qm SoC
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Mixel LVDS PHY IP block is found on Freescale i.MX8qm SoC.
+  It converts two groups of four 7/10 bits of CMOS data into two
+  groups of four data lanes of LVDS data streams. A phase-locked
+  transmit clock is transmitted in parallel with each group of
+  data streams over a fifth LVDS link. Every cycle of the transmit
+  clock, 56/80 bits of input data are sampled and transmitted
+  through the two groups of LVDS data streams. Together with the
+  transmit clocks, the two groups of LVDS data streams form two
+  LVDS channels.
+
+  The Mixel LVDS PHY found on Freescale i.MX8qm SoC is controlled
+  by Control and Status Registers(CSR) module in the SoC. The CSR
+  module, as a system controller, contains the PHY's registers.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-lvds-phy
+      - mixel,28fdsoi-lvds-1250-8ch-tx-pll
+
+  "#phy-cells":
+    const: 1
+    description: |
+      Cell allows setting the LVDS channel index of the PHY.
+      Index 0 is for LVDS channel0 and index 1 is for LVDS channel1.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#phy-cells"
+  - clocks
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    phy {
+        compatible = "fsl,imx8qm-lvds-phy";
+        #phy-cells = <1>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
new file mode 100644
index 0000000000..ff9f9ca0f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,lynx-28g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Lynx 28G SerDes PHY
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,lynx-28g
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      serdes_1: phy@1ea0000 {
+        compatible = "fsl,lynx-28g";
+        reg = <0x0 0x1ea0000 0x0 0x1e30>;
+        #phy-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
new file mode 100644
index 0000000000..f4b1ca2fb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS USB Phy Device
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-usbphy
+          - fsl,imx7ulp-usbphy
+          - fsl,vf610-usbphy
+      - items:
+          - enum:
+              - fsl,imx28-usbphy
+              - fsl,imx6ul-usbphy
+              - fsl,imx6sl-usbphy
+              - fsl,imx6sx-usbphy
+              - fsl,imx6q-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - const: fsl,imx6sll-usbphy
+          - const: fsl,imx6ul-usbphy
+          - const: fsl,imx23-usbphy
+      - items:
+          - enum:
+              - fsl,imx8dxl-usbphy
+              - fsl,imx8qm-usbphy
+              - fsl,imx8ulp-usbphy
+          - const: fsl,imx7ulp-usbphy
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  fsl,anatop:
+    description:
+      phandle for anatop register, it is only for imx6 SoC series.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  phy-3p0-supply:
+    description:
+      One of USB PHY's power supply. Can be used to keep a good signal
+      quality.
+
+  fsl,tx-cal-45-dn-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DN output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-cal-45-dp-ohms:
+    description:
+      Resistance (in ohms) of switchable high-speed trimming resistor
+      connected in parallel with the 45 ohm resistor that terminates
+      the DP output signal.
+    minimum: 35
+    maximum: 54
+    default: 45
+
+  fsl,tx-d-cal:
+    description:
+      Current trimming value (as a percentage) of the 17.78 mA TX
+      reference current.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 79
+    maximum: 119
+    default: 100
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - enum:
+                - fsl,imx6q-usbphy
+                - fsl,imx6sl-usbphy
+                - fsl,imx6sx-usbphy
+                - fsl,imx6sll-usbphy
+                - fsl,vf610-usbphy
+            - items:
+                - const: fsl,imx6ul-usbphy
+                - const: fsl,imx23-usbphy
+    then:
+      required:
+        - fsl,anatop
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usbphy1: usb-phy@20c9000 {
+        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+        reg = <0x020c9000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,anatop = <&anatop>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
new file mode 100644
index 0000000000..405c6b0b88
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3660-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin 960 USB PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+description: |+
+  Bindings for USB3 PHY on HiSilicon Kirin 960.
+
+properties:
+  compatible:
+    const: hisilicon,hi3660-usb-phy
+
+  "#phy-cells":
+    const: 0
+
+  hisilicon,pericrg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control iso refclk.
+
+  hisilicon,pctrl-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control usb tcxo.
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 1
+    description: Eye diagram for phy.
+
+required:
+  - compatible
+  - hisilicon,pericrg-syscon
+  - hisilicon,pctrl-syscon
+  - hisilicon,eye-diagram-param
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy {
+        compatible = "hisilicon,hi3660-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,eye-diagram-param = <0x22466e4>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
new file mode 100644
index 0000000000..a1a8a84dfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin970 USB PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+  Bindings for USB3 PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi3670-usb-phy
+
+  "#phy-cells":
+    const: 0
+
+  hisilicon,pericrg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control iso refclk.
+
+  hisilicon,pctrl-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control usb tcxo.
+
+  hisilicon,sctrl-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control phy deep sleep.
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 1
+    description: Eye diagram for phy.
+
+  hisilicon,tx-vboost-lvl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TX level vboost for phy.
+
+required:
+  - compatible
+  - hisilicon,pericrg-syscon
+  - hisilicon,pctrl-syscon
+  - hisilicon,sctrl-syscon
+  - hisilicon,eye-diagram-param
+  - hisilicon,tx-vboost-lvl
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy {
+        compatible = "hisilicon,hi3670-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,sctrl-syscon = <&sctrl>;
+        hisilicon,eye-diagram-param = <0xfdfee4>;
+        hisilicon,tx-vboost-lvl = <0x5>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
new file mode 100644
index 0000000000..17367a0275
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3670-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin970 PCIe PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+  Bindings for PCIe PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi970-pcie-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+    description: PHY Control registers
+
+  phy-supply:
+    description: The PCIe PHY power supply
+
+  clocks:
+    items:
+      - description: PCIe PHY clock
+      - description: PCIe AUX clock
+      - description: PCIe APB PHY clock
+      - description: PCIe APB SYS clock
+      - description: PCIe ACLK clock
+
+  clock-names:
+    items:
+      - const: phy_ref
+      - const: aux
+      - const: apb_phy
+      - const: apb_sys
+      - const: aclk
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Eye diagram for phy.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - hisilicon,eye-diagram-param
+  - phy-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_phy: pcie-phy@fc000000 {
+        compatible = "hisilicon,hi970-pcie-phy";
+        reg = <0x0 0xfc000000 0x0 0x80000>;
+        #phy-cells = <0>;
+        phy-supply = <&ldo33>;
+        clocks = <&crg_ctrl HI3670_CLK_GATE_PCIEPHY_REF>,
+                 <&crg_ctrl HI3670_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3670_ACLK_GATE_PCIE>;
+        clock-names = "phy_ref", "aux",
+                      "apb_phy", "apb_sys", "aclk";
+        hisilicon,eye-diagram-param = <0xffffffff 0xffffffff
+                                       0xffffffff 0xffffffff 0xffffffff>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt
new file mode 100644
index 0000000000..296168b74d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt
@@ -0,0 +1,22 @@
+Hisilicon hix5hd2 SATA PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-sata-phy"
+- reg: offset and length of the PHY registers
+- #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Optional Properties:
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,power-reg: offset and bit number within peripheral-syscon,
+	register of controlling sata power supply.
+
+Example:
+	sata_phy: phy@f9900000 {
+		compatible = "hisilicon,hix5hd2-sata-phy";
+		reg = <0xf9900000 0x10000>;
+		#phy-cells = <0>;
+		hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+		hisilicon,power-reg = <0x8 10>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
new file mode 100644
index 0000000000..30b42008db
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ingenic,phy-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs USB PHY
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+properties:
+  $nodename:
+    pattern: '^usb-phy@.*'
+
+  compatible:
+    enum:
+      - ingenic,jz4770-phy
+      - ingenic,jz4775-phy
+      - ingenic,jz4780-phy
+      - ingenic,x1000-phy
+      - ingenic,x1830-phy
+      - ingenic,x2000-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcc-supply:
+    description: VCC power supply
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcc-supply
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    otg_phy: usb-phy@3c {
+      compatible = "ingenic,jz4770-phy";
+      reg = <0x3c 0x10>;
+
+      vcc-supply = <&vcc>;
+      clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 0000000000..7dd6a4d94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+description: |
+  Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+  controllers. A single Combophy provides two PHY instances.
+
+properties:
+  $nodename:
+    pattern: "combophy(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  compatible:
+    items:
+      - const: intel,combophy-lgm
+      - const: intel,combo-phy
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    items:
+      - description: ComboPhy core registers
+      - description: PCIe app core control registers
+
+  reg-names:
+    items:
+      - const: core
+      - const: app
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: phy
+      - const: core
+      - const: iphy0
+      - const: iphy1
+
+  intel,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to Chip configuration registers
+          - description: ComboPhy instance id
+    description: Chip configuration registers handle and ComboPhy instance id
+
+  intel,hsio:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to HSIO registers
+          - description: ComboPhy instance id
+    description: HSIO registers handle and ComboPhy instance id on NOC
+
+  intel,aggregation:
+    type: boolean
+    description: |
+      Specify the flag to configure ComboPHY in dual lane mode.
+
+  intel,phy-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode of the two phys in ComboPhy.
+      See dt-bindings/phy/phy.h for values.
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - intel,syscfg
+  - intel,hsio
+  - intel,phy-mode
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    combophy@d0a00000 {
+        compatible = "intel,combophy-lgm", "intel,combo-phy";
+        clocks = <&cgu0 1>;
+        #phy-cells = <1>;
+        reg = <0xd0a00000 0x40000>,
+              <0xd0a40000 0x1000>;
+        reg-names = "core", "app";
+        resets = <&rcu0 0x50 6>,
+                 <&rcu0 0x50 17>,
+                 <&rcu0 0x50 23>,
+                 <&rcu0 0x50 24>;
+        reset-names = "phy", "core", "iphy0", "iphy1";
+        intel,syscfg = <&sysconf 0>;
+        intel,hsio = <&hsiol 0>;
+        intel,phy-mode = <PHY_TYPE_PCIE>;
+        intel,aggregation;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml b/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml
new file mode 100644
index 0000000000..5cee4c85ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,keembay-phy-usb.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,keembay-phy-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay USB PHY
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-usb-phy
+
+  reg:
+    items:
+      - description: USB APB CPR (clock, power, reset) register
+      - description: USB APB slave register
+
+  reg-names:
+    items:
+      - const: cpr-apb-base
+      - const: slv-apb-base
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@20400000 {
+          compatible = "intel,keembay-usb-phy";
+          reg = <0x20400000 0x1c>,
+                <0x20480000 0xd0>;
+          reg-names = "cpr-apb-base", "slv-apb-base";
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
new file mode 100644
index 0000000000..ca818f8357
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) eMMC PHY
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+description: |+
+  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
+  node is used to reference the base address of eMMC phy registers.
+
+  The eMMC PHY node should be the child of a syscon node with the
+  required property:
+
+  - compatible:         Should be one of the following:
+                        "intel,lgm-syscon", "syscon"
+  - reg:
+      maxItems: 1
+
+properties:
+  compatible:
+    enum:
+      - intel,lgm-emmc-phy
+      - intel,keembay-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: emmcclk
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    sysconf: chiptop@e0200000 {
+      compatible = "intel,lgm-syscon", "syscon";
+      reg = <0xe0200000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      emmc_phy: emmc-phy@a8 {
+        compatible = "intel,lgm-emmc-phy";
+        reg = <0x00a8 0x10>;
+        clocks = <&emmc>;
+        #phy-cells = <0>;
+      };
+    };
+
+  - |
+    phy@20290000 {
+          compatible = "intel,keembay-emmc-phy";
+          reg = <0x20290000 0x54>;
+          clocks = <&emmc>;
+          clock-names = "emmcclk";
+          #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
new file mode 100644
index 0000000000..653a122866
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM USB PHY
+
+maintainers:
+  - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: USB PHY and Host controller reset
+      - description: APB BUS reset
+      - description: General Hardware reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: phy31
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@e7e00000 {
+        compatible = "intel,lgm-usb-phy";
+        reg = <0xe7e00000 0x10000>;
+        clocks = <&cgu0 153>;
+        resets = <&rcu 0x70 0x24>,
+                 <&rcu 0x70 0x26>,
+                 <&rcu 0x70 0x28>;
+        reset-names = "phy", "apb", "phy31";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt
new file mode 100644
index 0000000000..300830dda0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt
@@ -0,0 +1,19 @@
+TI Keystone USB PHY
+
+Required properties:
+ - compatible: should be "ti,keystone-usbphy".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+   with 'reg' property.
+ - reg : Address and length of the usb phy control register set.
+
+The main purpose of this PHY driver is to enable the USB PHY reference clock
+gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just
+an NOP PHY driver.  Hence this node is referenced as both the usb2 and usb3
+phy node in the USB Glue layer driver node.
+
+usb_phy: usb_phy@2620738 {
+	compatible = "ti,keystone-usbphy";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x2620738 32>;
+};
diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
new file mode 100644
index 0000000000..711de06bb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq VRX200 and ARX300 PCIe PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  "#phy-cells":
+    const: 1
+    description: selects the PHY mode as defined in <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+
+  compatible:
+    enum:
+      - lantiq,vrx200-pcie-phy
+      - lantiq,arx300-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PHY module clock
+      - description: PDI register clock
+
+  clock-names:
+    items:
+      - const: phy
+      - const: pdi
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+      - description: shared reset line between the PCIe PHY and PCIe controller
+
+  reset-names:
+    items:
+      - const: phy
+      - const: pcie
+
+  lantiq,rcu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the RCU syscon
+
+  lantiq,rcu-endian-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the offset of the endian registers for this PHY instance in the RCU syscon
+
+  lantiq,rcu-big-endian-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the mask to set the PDI (PHY) registers for this PHY instance to big endian
+
+  big-endian:
+    description: Configures the PDI (PHY) registers in big-endian mode
+    type: boolean
+
+  little-endian:
+    description: Configures the PDI (PHY) registers in big-endian mode
+    type: boolean
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - lantiq,rcu
+  - lantiq,rcu-endian-offset
+  - lantiq,rcu-big-endian-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0_phy: phy@106800 {
+        compatible = "lantiq,vrx200-pcie-phy";
+        reg = <0x106800 0x100>;
+        lantiq,rcu = <&rcu0>;
+        lantiq,rcu-endian-offset = <0x4c>;
+        lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */
+        big-endian;
+        clocks = <&pmu 32>, <&pmu 36>;
+        clock-names = "phy", "pdi";
+        resets = <&reset0 12 24>, <&reset0 22 22>;
+        reset-names = "phy", "pcie";
+        #phy-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
new file mode 100644
index 0000000000..3aa1a46796
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,armada-3700-utmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada UTMI/UTMI+ PHY
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description:
+  On Armada 3700, there are two USB controllers, one is compatible with
+  the USB2 and USB3 specifications and supports OTG. The other one is USB2
+  compliant and only supports host mode. Both of these controllers come with
+  a slightly different UTMI PHY.
+
+properties:
+  compatible:
+    enum:
+      - marvell,a3700-utmi-host-phy
+      - marvell,a3700-utmi-otg-phy
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  marvell,usb-misc-reg:
+    description:
+      Phandle on the "USB miscellaneous registers" shared region
+      covering registers related to both the host controller and
+      the PHY.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - marvell,usb-misc-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb2_utmi_host_phy: phy@5f000 {
+      compatible = "marvell,a3700-utmi-host-phy";
+      reg = <0x5f000 0x800>;
+      marvell,usb-misc-reg = <&usb2_syscon>;
+      #phy-cells = <0>;
+    };
+
+    usb2_syscon: system-controller@5f800 {
+      compatible = "marvell,armada-3700-usb2-host-misc", "syscon";
+      reg = <0x5f800 0x800>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
new file mode 100644
index 0000000000..9ce7b4c6d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,armada-cp110-utmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada CP110/CP115 UTMI PHY
+
+maintainers:
+  - Konstantin Porotchkin <kostap@marvell.com>
+
+description:
+  On Armada 7k/8k and CN913x, there are two host and one device USB controllers.
+  Each of two exiting UTMI PHYs could be connected to either USB host or USB device
+  controller.
+  The USB device controller can only be connected to a single UTMI PHY port
+                      0.H----- USB HOST0
+  UTMI PHY0  --------/
+                      0.D-----0
+                               \------ USB DEVICE
+                      1.D-----1
+  UTMI PHY1  --------\
+                      1.H----- USB HOST1
+
+properties:
+  compatible:
+    const: marvell,cp110-utmi-phy
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  marvell,system-controller:
+    description:
+      Phandle to the system controller node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+# Required child nodes:
+
+patternProperties:
+  "^usb-phy@[0|1]$":
+    type: object
+    description:
+      Each UTMI PHY port must be represented as a sub-node.
+
+    properties:
+      reg:
+        description: phy port index.
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - marvell,system-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    cp0_utmi: utmi@580000 {
+      compatible = "marvell,cp110-utmi-phy";
+      reg = <0x580000 0x2000>;
+      marvell,system-controller = <&cp0_syscon0>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cp0_utmi0: usb-phy@0 {
+        reg = <0>;
+        #phy-cells = <0>;
+      };
+
+      cp0_utmi1: usb-phy@1 {
+        reg = <1>;
+        #phy-cells = <0>;
+      };
+    };
+
+    cp0_usb3_0 {
+      usb-phy = <&cp0_usb3_0_phy0>;
+      phys = <&cp0_utmi0>;
+      phy-names = "utmi";
+      /* UTMI0 is connected to USB host controller (default mode) */
+      dr_mode = "host";
+    };
+
+    cp0_usb3_1 {
+      usb-phy = <&cp0_usb3_0_phy1>;
+      phys = <&cp0_utmi1>;
+      phy-names = "utmi";
+      /* UTMI1 is connected to USB device controller */
+      dr_mode = "peripheral";
+    };
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
new file mode 100644
index 0000000000..bd3bd2f8b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: marvell,mmp3-hsic-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hsic-phy@f0001800 {
+            compatible = "marvell,mmp3-hsic-phy";
+            reg = <0xf0001800 0x40>;
+            #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml
new file mode 100644
index 0000000000..be13113f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-usb-phy.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/marvell,mmp3-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP3 USB PHY
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  $nodename:
+    pattern: '^usb-phy@[a-f0-9]+$'
+
+  compatible:
+    const: marvell,mmp3-usb-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@d4207000 {
+      compatible = "marvell,mmp3-usb-phy";
+      reg = <0xd4207000 0x40>;
+      #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
new file mode 100644
index 0000000000..a63b20dfa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MIPI Display Serial Interface (DSI) PHY
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: The MIPI DSI PHY supports up to 4-lane output.
+
+properties:
+  $nodename:
+    pattern: "^dsi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7623-mipi-tx
+          - const: mediatek,mt2701-mipi-tx
+      - items:
+          - enum:
+              - mediatek,mt6795-mipi-tx
+          - const: mediatek,mt8173-mipi-tx
+      - items:
+          - enum:
+              - mediatek,mt8365-mipi-tx
+          - const: mediatek,mt8183-mipi-tx
+      - const: mediatek,mt2701-mipi-tx
+      - const: mediatek,mt8173-mipi-tx
+      - const: mediatek,mt8183-mipi-tx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 1
+    description: A phandle to the calibration data provided by a nvmem device,
+      if unspecified, default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: calibration-data
+
+  drive-strength-microamp:
+    description: adjust driving current
+    multipleOf: 200
+    minimum: 2000
+    maximum: 6000
+    default: 4600
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    dsi-phy@10215000 {
+        compatible = "mediatek,mt8173-mipi-tx";
+        reg = <0x10215000 0x1000>;
+        clocks = <&clk26m>;
+        clock-output-names = "mipi_tx0_pll";
+        drive-strength-microamp = <4000>;
+        nvmem-cells = <&mipi_tx_calibration>;
+        nvmem-cell-names = "calibration-data";
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
new file mode 100644
index 0000000000..f3a8b0b745
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High Definition Multimedia Interface (HDMI) PHY
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel
+  output and drives the HDMI pads.
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7623-hdmi-phy
+          - const: mediatek,mt2701-hdmi-phy
+      - const: mediatek,mt2701-hdmi-phy
+      - const: mediatek,mt8173-hdmi-phy
+      - const: mediatek,mt8195-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: pll_ref
+
+  clock-output-names:
+    items:
+      - const: hdmitx_dig_cts
+
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  mediatek,ibias:
+    description:
+      TX DRV bias current for < 1.65Gbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0xa
+
+  mediatek,ibias_up:
+    description:
+      TX DRV bias current for >= 1.65Gbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0x1c
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - "#phy-cells"
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    hdmi_phy: hdmi-phy@10209100 {
+        compatible = "mediatek,mt8173-hdmi-phy";
+        reg = <0x10209100 0x24>;
+        clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+        clock-names = "pll_ref";
+        clock-output-names = "hdmitx_dig_cts";
+        mediatek,ibias = <0xa>;
+        mediatek,ibias_up = <0x1c>;
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
new file mode 100644
index 0000000000..99eac888ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Mt7621 PCIe PHY
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+    description: selects if the phy is dual-ported
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0_phy: pcie-phy@1e149000 {
+      compatible = "mediatek,mt7621-pci-phy";
+      reg = <0x1e149000 0x0700>;
+      clocks = <&sysc 0>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
new file mode 100644
index 0000000000..422750cc41
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIe PHY
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The PCIe PHY supports physical layer functionality for PCIe Gen3 port.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: sif
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 7
+    description:
+      Phandles to nvmem cell that contains the efuse data, if unspecified,
+      default value is used.
+
+  nvmem-cell-names:
+    items:
+      - const: glb_intr
+      - const: tx_ln0_pmos
+      - const: tx_ln0_nmos
+      - const: rx_ln0
+      - const: tx_ln1_pmos
+      - const: tx_ln1_nmos
+      - const: rx_ln1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@11e80000 {
+        compatible = "mediatek,mt8195-pcie-phy";
+        #phy-cells = <0>;
+        reg = <0x11e80000 0x10000>;
+        reg-names = "sif";
+        nvmem-cells = <&pciephy_glb_intr>,
+                      <&pciephy_tx_ln0_pmos>,
+                      <&pciephy_tx_ln0_nmos>,
+                      <&pciephy_rx_ln0>,
+                      <&pciephy_tx_ln1_pmos>,
+                      <&pciephy_tx_ln1_nmos>,
+                      <&pciephy_rx_ln1>;
+        nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+                           "tx_ln0_nmos", "rx_ln0",
+                           "tx_ln1_pmos", "tx_ln1_nmos",
+                           "rx_ln1";
+        power-domains = <&spm 2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
new file mode 100644
index 0000000000..2bb91542e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek T-PHY Controller
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The T-PHY controller supports physical layer functionality for a number of
+  controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
+
+  Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
+  T-PHY V2 (mt2712) / V3 (mt8195) when works on USB mode:
+  -----------------------------------
+  Version 1:
+  port        offset    bank
+  shared      0x0000    SPLLC
+              0x0100    FMREG
+  u2 port0    0x0800    U2PHY_COM
+  u3 port0    0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    U2PHY_COM
+  u3 port1    0x1100    U3PHYD
+              0x1200    U3PHYD_BANK2
+              0x1300    U3PHYA
+              0x1400    U3PHYA_DA
+  u2 port2    0x1800    U2PHY_COM
+              ...
+
+  Version 2/3:
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u3 port0    0x0700    SPLLC
+              0x0800    CHIP
+              0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u3 port1    0x1700    SPLLC
+              0x1800    CHIP
+              0x1900    U3PHYD
+              0x1a00    U3PHYD_BANK2
+              0x1b00    U3PHYA
+              0x1c00    U3PHYA_DA
+  u2 port2    0x2000    MISC
+              ...
+
+  SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
+  into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
+  added on V2; the FMREG bank for slew rate calibration is not used anymore
+  and reserved on V3;
+
+properties:
+  $nodename:
+    pattern: "^t-phy(@[0-9a-f]+)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-tphy
+              - mediatek,mt7623-tphy
+              - mediatek,mt7622-tphy
+              - mediatek,mt8516-tphy
+          - const: mediatek,generic-tphy-v1
+      - items:
+          - enum:
+              - mediatek,mt2712-tphy
+              - mediatek,mt7629-tphy
+              - mediatek,mt7986-tphy
+              - mediatek,mt8183-tphy
+              - mediatek,mt8186-tphy
+              - mediatek,mt8192-tphy
+              - mediatek,mt8365-tphy
+          - const: mediatek,generic-tphy-v2
+      - items:
+          - enum:
+              - mediatek,mt8188-tphy
+              - mediatek,mt8195-tphy
+          - const: mediatek,generic-tphy-v3
+      - const: mediatek,mt2701-u3phy
+        deprecated: true
+      - const: mediatek,mt2712-u3phy
+        deprecated: true
+      - const: mediatek,mt8173-u3phy
+
+  reg:
+    description:
+      Register shared by multiple ports, exclude port's private register.
+      It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
+      T-PHY V2/V3, such as mt2712.
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  # Used with non-empty value if optional 'reg' is not provided.
+  # The format of the value is an arbitrary number of triplets of
+  # (child-bus-address, parent-bus-address, length).
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 28
+
+# Required child node:
+patternProperties:
+  "^(usb|pcie|sata)-phy@[0-9a-f]+$":
+    type: object
+    description:
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 1
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+          - description: Reference clock of analog phy
+        description:
+          Uses both clocks if the clock of analog and digital phys are
+          separated, otherwise uses "ref" clock only if needed.
+
+      clock-names:
+        minItems: 1
+        items:
+          - const: ref
+          - const: da_ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+                - PHY_TYPE_PCIE
+                - PHY_TYPE_SATA
+                - PHY_TYPE_SGMII
+
+      nvmem-cells:
+        items:
+          - description: internal R efuse for U2 PHY or U3/PCIe PHY
+          - description: rx_imp_sel efuse for U3/PCIe PHY
+          - description: tx_imp_sel efuse for U3/PCIe PHY
+        description: |
+          Phandles to nvmem cell that contains the efuse data;
+          Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
+          three items should be provided at the same time for U3/PCIe PHY,
+          when use software to load efuse;
+          If unspecified, will use hardware auto-load efuse.
+
+      nvmem-cell-names:
+        items:
+          - const: intr
+          - const: rx_imp
+          - const: tx_imp
+
+      # The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,intr:
+        description:
+          The selection of internal resistor (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,discth:
+        description:
+          The selection of disconnect threshold (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 15
+
+      mediatek,pre-emphasis:
+        description:
+          The level of pre-emphasis which used to widen the eye opening and
+          boost eye swing, the unit step is about 4.16% increment; e.g. the
+          level 1 means amplitude increases about 4.16%, the level 2 is about
+          8.3% etc. (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 3
+
+      mediatek,bc12:
+        description:
+          Specify the flag to enable BC1.2 if support it
+        type: boolean
+
+      mediatek,syscon-type:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+        description:
+          A phandle to syscon used to access the register of type switch,
+          the field should always be 3 cells long.
+        items:
+          items:
+            - description:
+                The first cell represents a phandle to syscon
+            - description:
+                The second cell represents the register offset
+            - description:
+                The third cell represents the index of config segment
+              enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        phys = <&u2port0 PHY_TYPE_USB2>,
+               <&u3port0 PHY_TYPE_USB3>,
+               <&u2port1 PHY_TYPE_USB2>;
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+    };
+
+    t-phy@11290000 {
+        compatible = "mediatek,mt8173-u3phy";
+        reg = <0x11290000 0x800>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11290800 {
+            reg = <0x11290800 0x100>;
+            clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
+            clock-names = "ref", "da_ref";
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11290900 {
+            reg = <0x11290900 0x700>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            #phy-cells = <1>;
+        };
+
+        u2port1: usb-phy@11291000 {
+            reg = <0x11291000 0x100>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml
new file mode 100644
index 0000000000..3e62b5d4da
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Flash Storage (UFS) M-PHY
+
+maintainers:
+  - Stanley Chu <stanley.chu@mediatek.com>
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
+  Each UFS M-PHY node should have its own node.
+  To bind UFS M-PHY with UFS host controller, the controller node should
+  contain a phandle reference to UFS M-PHY node.
+
+properties:
+  $nodename:
+    pattern: "^ufs-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8195-ufsphy
+          - const: mediatek,mt8183-ufsphy
+      - const: mediatek,mt8183-ufsphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Unipro core control clock.
+      - description: M-PHY core control clock.
+
+  clock-names:
+    items:
+      - const: unipro
+      - const: mp
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    ufsphy: ufs-phy@11fa0000 {
+        compatible = "mediatek,mt8183-ufsphy";
+        reg = <0x11fa0000 0xc000>;
+        clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+                 <&infracfg CLK_INFRA_UFS_MP_SAP_BCLK>;
+        clock-names = "unipro", "mp";
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
new file mode 100644
index 0000000000..a9e3139fd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek XS-PHY Controller
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The XS-PHY controller supports physical layer functionality for USB3.1
+  GEN2 controller on MediaTek SoCs.
+
+  Banks layout of xsphy
+  ----------------------------------
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u2 port2    0x2000    MISC
+              ...
+  u31 common  0x3000    DIG_GLB
+              0x3100    PHYA_GLB
+  u31 port0   0x3400    DIG_LN_TOP
+              0x3500    DIG_LN_TX0
+              0x3600    DIG_LN_RX0
+              0x3700    DIG_LN_DAIF
+              0x3800    PHYA_LN
+  u31 port1   0x3a00    DIG_LN_TOP
+              0x3b00    DIG_LN_TX0
+              0x3c00    DIG_LN_RX0
+              0x3d00    DIG_LN_DAIF
+              0x3e00    PHYA_LN
+              ...
+  DIG_GLB & PHYA_GLB are shared by U31 ports.
+
+properties:
+  $nodename:
+    pattern: "^xs-phy@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt3611-xsphy
+          - mediatek,mt3612-xsphy
+      - const: mediatek,xsphy
+
+  reg:
+    description:
+      Register shared by multiple U3 ports, exclude port's private register,
+      if only U2 ports provided, shouldn't use the property.
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 17
+
+# Required child node:
+patternProperties:
+  "^usb-phy@[0-9a-f]+$":
+    type: object
+    description:
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+
+      clock-names:
+        items:
+          - const: ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+
+      # The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,efuse-intr:
+        description:
+          The selection of Internal Resistor (U2/U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 63
+
+      mediatek,efuse-tx-imp:
+        description:
+          The selection of TX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,efuse-rx-imp:
+        description:
+          The selection of RX Impedance (U3 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    u3phy: xs-phy@11c40000 {
+        compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy";
+        reg = <0x11c43000 0x0200>;
+        mediatek,src-ref-clk-mhz = <26>;
+        mediatek,src-coef = <17>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        u2port0: usb-phy@11c40000 {
+            reg = <0x11c40000 0x0400>;
+            clocks = <&clk48m>;
+            clock-names = "ref";
+            mediatek,eye-src = <4>;
+            #phy-cells = <1>;
+        };
+
+        u3port0: usb-phy@11c43000 {
+            reg = <0x11c43400 0x0500>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            mediatek,efuse-intr = <28>;
+            #phy-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 0000000000..6e914fbbac
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+  3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+  Also it has 8 logical Ethernet ports which can be connected to these
+  interfaces. The Serdes controller will allow to configure these interfaces
+  and allows to "mux" the interfaces to different ports.
+
+  For simple selection of the interface that is used with a port, the
+  following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+  number that represents the index of that interface type. For example
+  CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+  interface SerDes 2.
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-serdes
+
+  reg:
+    items:
+      - description: HSIO registers
+      - description: HW_STAT register
+
+  '#phy-cells':
+    const: 2
+    description: |
+      - Input port to use for a given macro.
+      - The macro to be used. The macros are defined in
+        dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@e2004010 {
+      compatible = "microchip,lan966x-serdes";
+      reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+      #phy-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
new file mode 100644
index 0000000000..bdbdb3bbdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,sparx5-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Serdes controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+
+description: |
+  The Sparx5 SERDES interfaces share the same basic functionality, but
+  support different operating modes and line rates.
+
+  The following list lists the SERDES features:
+
+  * RX Adaptive Decision Feedback Equalizer (DFE)
+  * Programmable continuous time linear equalizer (CTLE)
+  * Rx variable gain control
+  * Rx built-in fault detector (loss-of-lock/loss-of-signal)
+  * Adjustable tx de-emphasis (FFE)
+  * Tx output amplitude control
+  * Supports rx eye monitor
+  * Multiple loopback modes
+  * Prbs generator and checker
+  * Polarity inversion control
+
+  SERDES6G:
+
+  The SERDES6G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 100 Mbps (100BASE-FX)
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+
+  SERDES10G
+
+  The SERDES10G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 100 Mbps (100BASE-FX)
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5 Gbps (QSGMII/USGMII)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+  * 10 Gbps (10G-USGMII)
+  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+
+  SERDES25G
+
+  The SERDES25G is a high-speed SERDES interface, which can operate at
+  the following data rates:
+
+  * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+  * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+  * 5 Gbps (QSGMII/USGMII)
+  * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+  * 10 Gbps (10G-USGMII)
+  * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+  * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,sparx5-serdes
+
+  reg:
+    minItems: 1
+
+  '#phy-cells':
+    const: 1
+    description: |
+      - The main serdes input port
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@10808000 {
+      compatible = "microchip,sparx5-serdes";
+      #phy-cells = <1>;
+      clocks = <&sys_clk>;
+      reg = <0x10808000 0x5d0000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
new file mode 100644
index 0000000000..3c28ec50f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel DSI PHY for i.MX8
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+  MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+  electrical signals for DSI.
+
+  The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work
+  in either MIPI-DSI PHY mode or LVDS PHY mode.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-dphy
+      - fsl,imx8qxp-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phy_ref
+
+  "#phy-cells":
+    const: 0
+
+  fsl,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to Control and Status Registers(CSR) module.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-mipi-dphy
+    then:
+      properties:
+        fsl,syscon: false
+
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+        - assigned-clock-rates
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-dphy
+    then:
+      properties:
+        assigned-clocks: false
+        assigned-clock-parents: false
+        assigned-clock-rates: false
+
+      required:
+        - fsl,syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    dphy: dphy@30a0030 {
+        compatible = "fsl,imx8mq-mipi-dphy";
+        reg = <0x30a00300 0x100>;
+        clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+        clock-names = "phy_ref";
+        assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+        assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+        assigned-clock-rates = <24000000>;
+        #phy-cells = <0>;
+        power-domains = <&pgc_mipi>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
new file mode 100644
index 0000000000..3169b87323
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mscc,vsc7514-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot SerDes muxing
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  On Microsemi Ocelot, there is a handful of registers in HSIO address
+  space for setting up the SerDes to switch port muxing.
+
+  A SerDes X can be "muxed" to work with switch port Y or Z for example.
+  One specific SerDes can also be used as a PCIe interface.
+
+  Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
+
+  There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
+  half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
+  10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
+
+  Also, SERDES6G number (aka "macro") 0 is the only interface supporting
+  QSGMII.
+
+  This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
+  Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7514-serdes
+
+  "#phy-cells":
+    const: 2
+    description: |
+      The first number defines the input port to use for a given SerDes macro.
+      The second defines the macro to use. They are defined in
+      dt-bindings/phy/phy-ocelot-serdes.h
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties:
+  false
+
+examples:
+  - |
+    serdes: serdes {
+      compatible = "mscc,vsc7514-serdes";
+      #phy-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml
new file mode 100644
index 0000000000..33b41b6b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml
@@ -0,0 +1,654 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra124-xusb-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 XUSB pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra XUSB pad controller manages a set of I/O lanes (with differential
+  signals) which connect directly to pins/pads on the SoC package. Each lane
+  is controlled by a HW block referred to as a "pad" in the Tegra hardware
+  documentation. Each such "pad" may control either one or multiple lanes,
+  and thus contains any logic common to all its lanes. Each lane can be
+  separately configured and powered up.
+
+  Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
+  super-speed USB. Other lanes are for various types of low-speed, full-speed
+  or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
+  contains a software-configurable mux that sits between the I/O controller
+  ports (e.g. PCIe) and the lanes.
+
+  In addition to per-lane configuration, USB 3.0 ports may require additional
+  settings on a per-board basis.
+
+  Pads will be represented as children of the top-level XUSB pad controller
+  device tree node. Each lane exposed by the pad will be represented by its
+  own subnode and can be referenced by users of the lane using the standard
+  PHY bindings, as described by the phy-bindings.txt file in this directory.
+
+  The Tegra hardware documentation refers to the connection between the XUSB
+  pad controller and the XUSB controller as "ports". This is confusing since
+  "port" is typically used to denote the physical USB receptacle. The device
+  tree binding in this document uses the term "port" to refer to the logical
+  abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
+  for the USB signal, the VBUS power supply, the USB 2.0 companion port for
+  USB 3.0 receptacles, ...).
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-xusb-padctl
+
+      - items:
+          - const: nvidia,tegra132-xusb-padctl
+          - const: nvidia,tegra124-xusb-padctl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: XUSB pad controller interrupt
+
+  resets:
+    items:
+      - description: pad controller reset
+
+  reset-names:
+    items:
+      - const: padctl
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-erefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  avdd-pex-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-pex-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 3.3 V.
+
+  pads:
+    description: A required child node named "pads" contains a list of
+      subnodes, one for each of the pads exposed by the XUSB pad controller.
+      Each pad may need additional resources that can be referenced in its
+      pad node.
+
+      The "status" property is used to enable or disable the use of a pad.
+      If set to "disabled", the pad will not be used on the given board. In
+      order to use the pad and any of its lanes, this property must be set
+      to "okay" or be absent.
+    type: object
+    additionalProperties: false
+    properties:
+      usb2:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: USB2 tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              usb2-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+              usb2-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+              usb2-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+      ulpi:
+        type: object
+        additionalProperties: false
+        properties:
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              ulpi-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb ]
+
+      hsic:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: HSIC tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              hsic-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb ]
+
+              hsic-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb ]
+
+      pcie:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: PLLE clock
+
+          clock-names:
+            items:
+              - const: pll
+
+          resets:
+            items:
+              - description: reset for the PCIe UPHY block
+
+          reset-names:
+            items:
+              - const: phy
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              pcie-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie, usb3-ss ]
+
+              pcie-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie, usb3-ss ]
+
+              pcie-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie, usb3-ss ]
+
+              pcie-3:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie, usb3-ss ]
+
+              pcie-4:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie, usb3-ss ]
+
+      sata:
+        type: object
+        additionalProperties: false
+        properties:
+          resets:
+            items:
+              - description: reset for the SATA UPHY block
+
+          reset-names:
+            items:
+              - const: phy
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              sata-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ sata, usb3-ss ]
+
+  ports:
+    description: A required child node named "ports" contains a list of
+      subnodes, one for each of the ports exposed by the XUSB pad controller.
+      Each port may need additional resources that can be referenced in its
+      port node.
+
+      The "status" property is used to enable or disable the use of a port.
+      If set to "disabled", the port will not be used on the given board. In
+      order to use the port, this property must be set to "okay".
+    type: object
+    additionalProperties: false
+    properties:
+      usb2-0:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb2-1:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb2-2:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      ulpi-0:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      hsic-0:
+        type: object
+        additionalProperties: false
+        properties:
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      hsic-1:
+        type: object
+        additionalProperties: false
+        properties:
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-0:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-1:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - avdd-pll-utmip-supply
+  - avdd-pll-erefe-supply
+  - avdd-pex-pll-supply
+  - hvdd-pex-pll-e-supply
+
+examples:
+  # Tegra124 and Tegra132
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    padctl@7009f000 {
+        compatible = "nvidia,tegra124-xusb-padctl";
+        reg = <0x7009f000 0x1000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&tegra_car 142>;
+        reset-names = "padctl";
+
+        avdd-pll-utmip-supply = <&vddio_1v8>;
+        avdd-pll-erefe-supply = <&avdd_1v05_run>;
+        avdd-pex-pll-supply = <&vdd_1v05_run>;
+        hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+        pads {
+            usb2 {
+                lanes {
+                    usb2-0 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-1 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-2 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            ulpi {
+                lanes {
+                    ulpi-0 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            hsic {
+                lanes {
+                    hsic-0 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    hsic-1 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            pcie {
+                lanes {
+                    pcie-0 {
+                        nvidia,function = "usb3-ss";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-1 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-2 {
+                        nvidia,function = "pcie";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-3 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-4 {
+                        nvidia,function = "pcie";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            sata {
+                lanes {
+                    sata-0 {
+                        nvidia,function = "sata";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            /* Micro A/B */
+            usb2-0 {
+                mode = "otg";
+            };
+
+            /* Mini PCIe */
+            usb2-1 {
+                mode = "host";
+            };
+
+            /* USB3 */
+            usb2-2 {
+                vbus-supply = <&vdd_usb3_vbus>;
+                mode = "host";
+            };
+
+            ulpi-0 {
+                status = "disabled";
+            };
+
+            hsic-0 {
+                status = "disabled";
+            };
+
+            hsic-1 {
+                status = "disabled";
+            };
+
+            usb3-0 {
+                nvidia,usb2-companion = <2>;
+            };
+
+            usb3-1 {
+                status = "disabled";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra186-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra186-xusb-padctl.yaml
new file mode 100644
index 0000000000..8b1d5a8529
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra186-xusb-padctl.yaml
@@ -0,0 +1,544 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 XUSB pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra XUSB pad controller manages a set of I/O lanes (with differential
+  signals) which connect directly to pins/pads on the SoC package. Each lane
+  is controlled by a HW block referred to as a "pad" in the Tegra hardware
+  documentation. Each such "pad" may control either one or multiple lanes,
+  and thus contains any logic common to all its lanes. Each lane can be
+  separately configured and powered up.
+
+  Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
+  super-speed USB. Other lanes are for various types of low-speed, full-speed
+  or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
+  contains a software-configurable mux that sits between the I/O controller
+  ports (e.g. PCIe) and the lanes.
+
+  In addition to per-lane configuration, USB 3.0 ports may require additional
+  settings on a per-board basis.
+
+  Pads will be represented as children of the top-level XUSB pad controller
+  device tree node. Each lane exposed by the pad will be represented by its
+  own subnode and can be referenced by users of the lane using the standard
+  PHY bindings, as described by the phy-bindings.txt file in this directory.
+
+  The Tegra hardware documentation refers to the connection between the XUSB
+  pad controller and the XUSB controller as "ports". This is confusing since
+  "port" is typically used to denote the physical USB receptacle. The device
+  tree binding in this document uses the term "port" to refer to the logical
+  abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
+  for the USB signal, the VBUS power supply, the USB 2.0 companion port for
+  USB 3.0 receptacles, ...).
+
+properties:
+  compatible:
+    const: nvidia,tegra186-xusb-padctl
+
+  reg:
+    items:
+      - description: pad controller registers
+      - description: AO registers
+
+  interrupts:
+    items:
+      - description: XUSB pad controller interrupt
+
+  reg-names:
+    items:
+      - const: padctl
+      - const: ao
+
+  resets:
+    items:
+      - description: pad controller reset
+
+  reset-names:
+    items:
+      - const: padctl
+
+  avdd-pll-erefeut-supply:
+    description: UPHY brick and reference clock as well as UTMI PHY
+      power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must
+      supply 3.3 V.
+
+  vclamp-usb-supply:
+    description: Bias rail for USB pad. Must supply 1.8 V.
+
+  vddio-hsic-supply:
+    description: HSIC PHY power supply. Must supply 1.2 V.
+
+  pads:
+    description: A required child node named "pads" contains a list of
+      subnodes, one for each of the pads exposed by the XUSB pad controller.
+      Each pad may need additional resources that can be referenced in its
+      pad node.
+
+      The "status" property is used to enable or disable the use of a pad.
+      If set to "disabled", the pad will not be used on the given board. In
+      order to use the pad and any of its lanes, this property must be set
+      to "okay" or be absent.
+    type: object
+    additionalProperties: false
+    properties:
+      usb2:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: USB2 tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              usb2-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb2-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb2-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+      hsic:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: HSIC tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              hsic-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+      usb3:
+        type: object
+        additionalProperties: false
+        properties:
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              usb3-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb3-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb3-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+  ports:
+    description: A required child node named "ports" contains a list of
+      subnodes, one for each of the ports exposed by the XUSB pad controller.
+      Each port may need additional resources that can be referenced in its
+      port node.
+
+      The "status" property is used to enable or disable the use of a port.
+      If set to "disabled", the port will not be used on the given board. In
+      order to use the port, this property must be set to "okay".
+    type: object
+    additionalProperties: false
+    properties:
+      usb2-0:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-1:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-2:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      hsic-0:
+        type: object
+        additionalProperties: false
+
+      usb3-0:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-1:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-2:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - avdd-pll-erefeut-supply
+  - avdd-usb-supply
+  - vclamp-usb-supply
+  - vddio-hsic-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/gpio/tegra186-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@3520000 {
+        compatible = "nvidia,tegra186-xusb-padctl";
+        reg = <0x03520000 0x1000>,
+              <0x03540000 0x1000>;
+        reg-names = "padctl", "ao";
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+        resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>;
+        reset-names = "padctl";
+
+        avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+        avdd-usb-supply = <&vdd_3v3_sys>;
+        vclamp-usb-supply = <&vdd_1v8>;
+        vddio-hsic-supply = <&gnd>;
+
+        pads {
+            usb2 {
+                clocks = <&bpmp TEGRA186_CLK_USB2_TRK>;
+                clock-names = "trk";
+
+                lanes {
+                    usb2-0 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-1 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-2 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            hsic {
+                clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>;
+                clock-names = "trk";
+                status = "disabled";
+
+                lanes {
+                    hsic-0 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            usb3 {
+                lanes {
+                    usb3-0 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb3-1 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb3-2 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            usb2-0 {
+                mode = "otg";
+                vbus-supply = <&vdd_usb0>;
+                usb-role-switch;
+
+                connector {
+                    compatible = "gpio-usb-b-connector",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+                    vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+                    id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+                };
+            };
+
+            usb2-1 {
+                vbus-supply = <&vdd_usb1>;
+                mode = "host";
+            };
+
+            usb2-2 {
+                status = "disabled";
+            };
+
+            hsic-0 {
+                status = "disabled";
+            };
+
+            usb3-0 {
+                nvidia,usb2-companion = <1>;
+            };
+
+            usb3-1 {
+                status = "disabled";
+            };
+
+            usb3-2 {
+                status = "disabled";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra194-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra194-xusb-padctl.yaml
new file mode 100644
index 0000000000..6e33983996
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra194-xusb-padctl.yaml
@@ -0,0 +1,632 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra194-xusb-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 XUSB pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra XUSB pad controller manages a set of I/O lanes (with differential
+  signals) which connect directly to pins/pads on the SoC package. Each lane
+  is controlled by a HW block referred to as a "pad" in the Tegra hardware
+  documentation. Each such "pad" may control either one or multiple lanes,
+  and thus contains any logic common to all its lanes. Each lane can be
+  separately configured and powered up.
+
+  Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
+  super-speed USB. Other lanes are for various types of low-speed, full-speed
+  or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
+  contains a software-configurable mux that sits between the I/O controller
+  ports (e.g. PCIe) and the lanes.
+
+  In addition to per-lane configuration, USB 3.0 ports may require additional
+  settings on a per-board basis.
+
+  Pads will be represented as children of the top-level XUSB pad controller
+  device tree node. Each lane exposed by the pad will be represented by its
+  own subnode and can be referenced by users of the lane using the standard
+  PHY bindings, as described by the phy-bindings.txt file in this directory.
+
+  The Tegra hardware documentation refers to the connection between the XUSB
+  pad controller and the XUSB controller as "ports". This is confusing since
+  "port" is typically used to denote the physical USB receptacle. The device
+  tree binding in this document uses the term "port" to refer to the logical
+  abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
+  for the USB signal, the VBUS power supply, the USB 2.0 companion port for
+  USB 3.0 receptacles, ...).
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-xusb-padctl
+      - nvidia,tegra234-xusb-padctl
+
+  reg:
+    items:
+      - description: pad controller registers
+      - description: AO registers
+
+  reg-names:
+    items:
+      - const: padctl
+      - const: ao
+
+  interrupts:
+    items:
+      - description: XUSB pad controller interrupt
+
+  resets:
+    items:
+      - description: pad controller reset
+
+  reset-names:
+    items:
+      - const: padctl
+
+  avdd-usb-supply:
+    description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must
+      supply 3.3 V.
+
+  vclamp-usb-supply:
+    description: Bias rail for USB pad. Must supply 1.8 V.
+
+  pads:
+    description: A required child node named "pads" contains a list of
+      subnodes, one for each of the pads exposed by the XUSB pad controller.
+      Each pad may need additional resources that can be referenced in its
+      pad node.
+
+      The "status" property is used to enable or disable the use of a pad.
+      If set to "disabled", the pad will not be used on the given board. In
+      order to use the pad and any of its lanes, this property must be set
+      to "okay" or absent.
+    type: object
+    additionalProperties: false
+    properties:
+      usb2:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: USB2 tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              usb2-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb2-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb2-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb2-3:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+      usb3:
+        type: object
+        additionalProperties: false
+        properties:
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              usb3-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb3-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb3-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+              usb3-3:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ xusb ]
+
+  ports:
+    description: A required child node named "ports" contains a list of
+      subnodes, one for each of the ports exposed by the XUSB pad controller.
+      Each port may need additional resources that can be referenced in its
+      port node.
+
+      The "status" property is used to enable or disable the use of a port.
+      If set to "disabled", the port will not be used on the given board. In
+      order to use the port, this property must be set to "okay".
+    type: object
+    additionalProperties: false
+    properties:
+      usb2-0:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-1:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-2:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-3:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb3-0:
+        type: object
+        additionalProperties: false
+        properties:
+          maximum-speed:
+            description: A string property that specifies the maximum
+              supported speed of a USB3 port.
+            $ref: /schemas/types.yaml#/definitions/string
+            oneOf:
+              - description: The USB3 port supports USB 3.1 Gen 2 speed.
+                  This is the default.
+                const: super-speed-plus
+              - description: The USB3 port supports USB 3.1 Gen 1 speed
+                  only.
+                const: super-speed
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-1:
+        type: object
+        additionalProperties: false
+        properties:
+          maximum-speed:
+            description: A string property that specifies the maximum
+              supported speed of a USB3 port.
+            $ref: /schemas/types.yaml#/definitions/string
+            oneOf:
+              - description: The USB3 port supports USB 3.1 Gen 2 speed.
+                  This is the default.
+                const: super-speed-plus
+              - description: The USB3 port supports USB 3.1 Gen 1 speed
+                  only.
+                const: super-speed
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-2:
+        type: object
+        additionalProperties: false
+        properties:
+          maximum-speed:
+            description: A string property that specifies the maximum
+              supported speed of a USB3 port.
+            $ref: /schemas/types.yaml#/definitions/string
+            oneOf:
+              - description: The USB3 port supports USB 3.1 Gen 2 speed.
+                  This is the default.
+                const: super-speed-plus
+              - description: The USB3 port supports USB 3.1 Gen 1 speed
+                  only.
+                const: super-speed
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-3:
+        type: object
+        additionalProperties: false
+        properties:
+          maximum-speed:
+            description: A string property that specifies the maximum
+              supported speed of a USB3 port.
+            $ref: /schemas/types.yaml#/definitions/string
+            oneOf:
+              - description: The USB3 port supports USB 3.1 Gen 2 speed.
+                  This is the default.
+                const: super-speed-plus
+              - description: The USB3 port supports USB 3.1 Gen 1 speed
+                  only.
+                const: super-speed
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - avdd-usb-supply
+  - vclamp-usb-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    padctl@3520000 {
+        compatible = "nvidia,tegra194-xusb-padctl";
+        reg = <0x03520000 0x1000>,
+              <0x03540000 0x1000>;
+        reg-names = "padctl", "ao";
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+        resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
+        reset-names = "padctl";
+
+        avdd-usb-supply = <&vdd_usb_3v3>;
+        vclamp-usb-supply = <&vdd_1v8ao>;
+
+        pads {
+            usb2 {
+                clocks = <&bpmp TEGRA194_CLK_USB2_TRK>;
+                clock-names = "trk";
+
+                lanes {
+                    usb2-0 {
+                        nvidia,function = "xusb";
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-1 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-2 {
+                        nvidia,function = "xusb";
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-3 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            usb3 {
+                lanes {
+                    usb3-0 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb3-1 {
+                        nvidia,function = "xusb";
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    usb3-2 {
+                        nvidia,function = "xusb";
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    usb3-3 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            usb2-0 {
+                status = "disabled";
+            };
+
+            usb2-1 {
+                vbus-supply = <&vdd_5v0_sys>;
+                mode = "host";
+            };
+
+            usb2-2 {
+                status = "disabled";
+            };
+
+            usb2-3 {
+                vbus-supply = <&vdd_5v_sata>;
+                mode = "host";
+            };
+
+            usb3-0 {
+                vbus-supply = <&vdd_5v0_sys>;
+                nvidia,usb2-companion = <1>;
+            };
+
+            usb3-1 {
+                status = "disabled";
+            };
+
+            usb3-2 {
+                status = "disabled";
+            };
+
+            usb3-3 {
+                maximum-speed = "super-speed";
+                vbus-supply = <&vdd_5v0_sys>;
+                nvidia,usb2-companion = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
new file mode 100644
index 0000000000..d61585c96e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra20-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra USB PHY
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra124-usb-phy
+              - nvidia,tegra114-usb-phy
+          - enum:
+              - nvidia,tegra30-usb-phy
+      - items:
+          - enum:
+              - nvidia,tegra30-usb-phy
+              - nvidia,tegra20-usb-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      PHY0 and PHY2 share power and ground, PHY0 contains shared registers.
+      PHY0 and PHY2 must specify two register sets, where the first set is
+      PHY own registers and the second set is the PHY0 registers.
+
+  clocks:
+    anyOf:
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: ULPI PHY clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI pads control registers clock
+
+      - items:
+          - description: Registers clock
+          - description: Main PHY clock
+          - description: UTMI timeout clock
+          - description: UTMI pads control registers clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: reg
+          - const: pll_u
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: ulpi-link
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: utmi-pads
+
+      - items:
+          - const: reg
+          - const: pll_u
+          - const: timer
+          - const: utmi-pads
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    oneOf:
+      - maxItems: 1
+        description: PHY reset
+
+      - items:
+          - description: PHY reset
+          - description: UTMI pads reset
+
+  reset-names:
+    oneOf:
+      - const: usb
+
+      - items:
+          - const: usb
+          - const: utmi-pads
+
+  "#phy-cells":
+    const: 0
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, ulpi, hsic]
+
+  dr_mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+    default: host
+
+  vbus-supply:
+    description: Regulator controlling USB VBUS.
+
+  nvidia,has-legacy-mode:
+    description: |
+      Indicates whether this controller can operate in legacy mode
+      (as APX 2500 / 2600). In legacy mode some registers are accessed
+      through the APB_MISC base address instead of the USB controller.
+    type: boolean
+
+  nvidia,is-wired:
+    description: |
+      Indicates whether we can do certain kind of power optimizations for
+      the devices that are always connected. e.g. modem.
+    type: boolean
+
+  nvidia,has-utmi-pad-registers:
+    description: |
+      Indicates whether this controller contains the UTMI pad control
+      registers common to all USB controllers.
+    type: boolean
+
+  nvidia,hssync-start-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles to wait before start of sync launches
+      RxActive.
+
+  nvidia,elastic-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Variable FIFO Depth of elastic input store.
+
+  nvidia,idle-wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: |
+      Number of 480 MHz clock cycles of idle to wait before declare IDLE.
+
+  nvidia,term-range-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description: Range adjustment on terminations.
+
+  nvidia,xcvr-setup:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 127
+    description: Input of XCVR cell, HS driver output control.
+
+  nvidia,xcvr-setup-use-fuses:
+    description: Indicates that the value is read from the on-chip fuses.
+    type: boolean
+
+  nvidia,xcvr-lsfslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS falling slew rate control.
+
+  nvidia,xcvr-lsrslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: LS rising slew rate control.
+
+  nvidia,xcvr-hsslew:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 511
+    description: HS slew rate control.
+
+  nvidia,hssquelch-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: HS squelch detector level.
+
+  nvidia,hsdiscon-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: HS disconnect detector level.
+
+  nvidia,phy-reset-gpio:
+    maxItems: 1
+    description: GPIO used to reset the PHY.
+
+  nvidia,pmc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to Power Management controller.
+          - description: USB controller ID.
+    description:
+      Phandle to Power Management controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+  - phy_type
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        phy_type:
+          const: utmi
+
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          maxItems: 2
+
+      required:
+        - nvidia,hssync-start-delay
+        - nvidia,elastic-limit
+        - nvidia,idle-wait-delay
+        - nvidia,term-range-adj
+        - nvidia,xcvr-lsfslew
+        - nvidia,xcvr-lsrslew
+
+      anyOf:
+        - required: ["nvidia,xcvr-setup"]
+        - required: ["nvidia,xcvr-setup-use-fuses"]
+
+      if:
+        properties:
+          compatible:
+            contains:
+              const: nvidia,tegra30-usb-phy
+
+      then:
+        properties:
+          clocks:
+            maxItems: 3
+
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: utmi-pads
+
+        required:
+          - nvidia,xcvr-hsslew
+          - nvidia,hssquelch-level
+          - nvidia,hsdiscon-level
+
+      else:
+        properties:
+          clocks:
+            maxItems: 4
+
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: timer
+              - const: utmi-pads
+
+  - if:
+      properties:
+        phy_type:
+          const: ulpi
+
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        clocks:
+          minItems: 2
+          maxItems: 3
+
+        clock-names:
+          minItems: 2
+          maxItems: 3
+
+          oneOf:
+            - items:
+                - const: reg
+                - const: pll_u
+
+            - items:
+                - const: reg
+                - const: pll_u
+                - const: ulpi-link
+
+        resets:
+          minItems: 1
+          maxItems: 2
+
+        reset-names:
+          minItems: 1
+          maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    usb-phy@7d008000 {
+        compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+        reg = <0x7d008000 0x4000>,
+              <0x7d000000 0x4000>;
+        interrupts = <0 97 4>;
+        phy_type = "utmi";
+        clocks = <&tegra_car TEGRA124_CLK_USB3>,
+                 <&tegra_car TEGRA124_CLK_PLL_U>,
+                 <&tegra_car TEGRA124_CLK_USBD>;
+        clock-names = "reg", "pll_u", "utmi-pads";
+        resets = <&tegra_car 59>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,hssync-start-delay = <0>;
+        nvidia,idle-wait-delay = <17>;
+        nvidia,elastic-limit = <16>;
+        nvidia,term-range-adj = <6>;
+        nvidia,xcvr-setup = <9>;
+        nvidia,xcvr-lsfslew = <0>;
+        nvidia,xcvr-lsrslew = <3>;
+        nvidia,hssquelch-level = <2>;
+        nvidia,hsdiscon-level = <5>;
+        nvidia,xcvr-hsslew = <12>;
+        nvidia,pmc = <&tegra_pmc 2>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    usb-phy@c5004000 {
+        compatible = "nvidia,tegra20-usb-phy";
+        reg = <0xc5004000 0x4000>;
+        interrupts = <0 21 4>;
+        phy_type = "ulpi";
+        clocks = <&tegra_car TEGRA20_CLK_USB2>,
+                 <&tegra_car TEGRA20_CLK_PLL_U>,
+                 <&tegra_car TEGRA20_CLK_CDEV2>;
+        clock-names = "reg", "pll_u", "ulpi-link";
+        resets = <&tegra_car 58>, <&tegra_car 22>;
+        reset-names = "usb", "utmi-pads";
+        #phy-cells = <0>;
+        nvidia,pmc = <&tegra_pmc 1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml
new file mode 100644
index 0000000000..e9237c58ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml
@@ -0,0 +1,786 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 XUSB pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra XUSB pad controller manages a set of I/O lanes (with differential
+  signals) which connect directly to pins/pads on the SoC package. Each lane
+  is controlled by a HW block referred to as a "pad" in the Tegra hardware
+  documentation. Each such "pad" may control either one or multiple lanes,
+  and thus contains any logic common to all its lanes. Each lane can be
+  separately configured and powered up.
+
+  Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
+  super-speed USB. Other lanes are for various types of low-speed, full-speed
+  or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
+  contains a software-configurable mux that sits between the I/O controller
+  ports (e.g. PCIe) and the lanes.
+
+  In addition to per-lane configuration, USB 3.0 ports may require additional
+  settings on a per-board basis.
+
+  Pads will be represented as children of the top-level XUSB pad controller
+  device tree node. Each lane exposed by the pad will be represented by its
+  own subnode and can be referenced by users of the lane using the standard
+  PHY bindings, as described by the phy-bindings.txt file in this directory.
+
+  The Tegra hardware documentation refers to the connection between the XUSB
+  pad controller and the XUSB controller as "ports". This is confusing since
+  "port" is typically used to denote the physical USB receptacle. The device
+  tree binding in this document uses the term "port" to refer to the logical
+  abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
+  for the USB signal, the VBUS power supply, the USB 2.0 companion port for
+  USB 3.0 receptacles, ...).
+
+properties:
+  compatible:
+    const: nvidia,tegra210-xusb-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: pad controller reset
+
+  interrupts:
+    items:
+      - description: XUSB pad controller interrupt
+
+  reset-names:
+    items:
+      - const: padctl
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-pex-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-pex-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+  nvidia,pmc:
+    description: phandle to the Tegra Power Management Controller (PMC) node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  pads:
+    description: A required child node named "pads" contains a list of
+      subnodes, one for each of the pads exposed by the XUSB pad controller.
+      Each pad may need additional resources that can be referenced in its
+      pad node.
+
+      The "status" property is used to enable or disable the use of a pad.
+      If set to "disabled", the pad will not be used on the given board. In
+      order to use the pad and any of its lanes, this property must be set
+      to "okay" or be absent.
+    type: object
+    additionalProperties: false
+    properties:
+      usb2:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: USB2 tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              usb2-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+              usb2-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+              usb2-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+              usb2-3:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb, uart ]
+
+      hsic:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: HSIC tracking clock
+
+          clock-names:
+            items:
+              - const: trk
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              hsic-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb ]
+
+              hsic-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ snps, xusb ]
+
+      pcie:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: PCIe PLL clock source
+
+          clock-names:
+            items:
+              - const: pll
+
+          resets:
+            items:
+              - description: PCIe PHY reset
+
+          reset-names:
+            items:
+              - const: phy
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              pcie-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+              pcie-1:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+              pcie-2:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+              pcie-3:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+              pcie-4:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+              pcie-5:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+              pcie-6:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ pcie-x1, usb3-ss, pcie-x4 ]
+
+      sata:
+        type: object
+        additionalProperties: false
+        properties:
+          clocks:
+            items:
+              - description: SATA PLL clock source
+
+          clock-names:
+            items:
+              - const: pll
+
+          resets:
+            items:
+              - description: SATA PHY reset
+
+          reset-names:
+            items:
+              - const: phy
+
+          lanes:
+            type: object
+            additionalProperties: false
+            properties:
+              sata-0:
+                type: object
+                additionalProperties: false
+                properties:
+                  "#phy-cells":
+                    const: 0
+
+                  nvidia,function:
+                    description: Function selection for this lane.
+                    $ref: /schemas/types.yaml#/definitions/string
+                    enum: [ usb3-ss, sata ]
+
+  ports:
+    description: A required child node named "ports" contains a list of
+      subnodes, one for each of the ports exposed by the XUSB pad controller.
+      Each port may need additional resources that can be referenced in its
+      port node.
+
+      The "status" property is used to enable or disable the use of a port.
+      If set to "disabled", the port will not be used on the given board. In
+      order to use the port, this property must be set to "okay".
+    type: object
+    additionalProperties: false
+    properties:
+      usb2-0:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-1:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-2:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      usb2-3:
+        type: object
+        additionalProperties: false
+        properties:
+          # no need to further describe this because the connector will
+          # match on gpio-usb-b-connector or usb-b-connector and cause
+          # that binding to be selected for the subnode
+          connector:
+            type: object
+
+          mode:
+            description: A string that determines the mode in which to
+              run the port.
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ host, peripheral, otg ]
+
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          usb-role-switch:
+            description: |
+              A boolean property whole presence indicates that the port
+              supports OTG or peripheral mode. If present, the port
+              supports switching between USB host and peripheral roles.
+              A connector must be added as a subnode in that case.
+
+              See ../connector/usb-connector.yaml.
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+        dependencies:
+          usb-role-switch: [ connector ]
+
+      hsic-0:
+        type: object
+        additionalProperties: false
+        properties:
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      hsic-1:
+        type: object
+        additionalProperties: false
+        properties:
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-0:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-1:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-2:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+      usb3-3:
+        type: object
+        additionalProperties: false
+        properties:
+          nvidia,internal:
+            description: A boolean property whose presence determines
+              that a port is internal. In the absence of this property
+              the port is considered to be external.
+            $ref: /schemas/types.yaml#/definitions/flag
+
+          nvidia,usb2-companion:
+            description: A single cell that specifies the physical port
+              number to map this super-speed USB port to. The range of
+              valid port numbers varies with the SoC generation.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+
+          vbus-supply:
+            description: A phandle to the regulator supplying the VBUS
+              voltage.
+
+additionalProperties: false
+
+required:
+  - avdd-pll-utmip-supply
+  - avdd-pll-uerefe-supply
+  - dvdd-pex-pll-supply
+  - hvdd-pex-pll-e-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    padctl@7009f000 {
+        compatible = "nvidia,tegra210-xusb-padctl";
+        reg = <0x7009f000 0x1000>;
+        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&tegra_car 142>;
+        reset-names = "padctl";
+
+        avdd-pll-utmip-supply = <&vdd_1v8>;
+        avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+        dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+        hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+        pads {
+            usb2 {
+                clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+                clock-names = "trk";
+
+                lanes {
+                    usb2-0 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-1 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-2 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+
+                    usb2-3 {
+                        nvidia,function = "xusb";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            hsic {
+                clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+                clock-names = "trk";
+                status = "disabled";
+
+                lanes {
+                    hsic-0 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+
+                    hsic-1 {
+                        status = "disabled";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            pcie {
+                clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+                clock-names = "pll";
+                resets = <&tegra_car 205>;
+                reset-names = "phy";
+
+                lanes {
+                    pcie-0 {
+                        nvidia,function = "pcie-x1";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-1 {
+                        nvidia,function = "pcie-x4";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-2 {
+                        nvidia,function = "pcie-x4";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-3 {
+                        nvidia,function = "pcie-x4";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-4 {
+                        nvidia,function = "pcie-x4";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-5 {
+                        nvidia,function = "usb3-ss";
+                        #phy-cells = <0>;
+                    };
+
+                    pcie-6 {
+                        nvidia,function = "usb3-ss";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+
+            sata {
+                clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+                clock-names = "pll";
+                resets = <&tegra_car 204>;
+                reset-names = "phy";
+
+                lanes {
+                    sata-0 {
+                        nvidia,function = "sata";
+                        #phy-cells = <0>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            usb2-0 {
+                mode = "peripheral";
+                usb-role-switch;
+
+                connector {
+                    compatible = "gpio-usb-b-connector",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+                    vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_LOW>;
+                };
+            };
+
+            usb2-1 {
+                vbus-supply = <&vdd_5v0_rtl>;
+                mode = "host";
+            };
+
+            usb2-2 {
+                vbus-supply = <&vdd_usb_vbus>;
+                mode = "host";
+            };
+
+            usb2-3 {
+                mode = "host";
+            };
+
+            hsic-0 {
+                status = "disabled";
+            };
+
+            hsic-1 {
+                status = "disabled";
+            };
+
+            usb3-0 {
+                nvidia,usb2-companion = <1>;
+            };
+
+            usb3-1 {
+                nvidia,usb2-companion = <2>;
+            };
+
+            usb3-2 {
+                status = "disabled";
+            };
+
+            usb3-3 {
+                status = "disabled";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
new file mode 100644
index 0000000000..8b5a7a28a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
@@ -0,0 +1,48 @@
+mvebu armada 38x comphy driver
+------------------------------
+
+This comphy controller can be found on Marvell Armada 38x. It provides a
+number of shared PHYs used by various interfaces (network, sata, usb,
+PCIe...).
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-comphy"
+- reg: should contain the comphy register location and length.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional properties:
+
+- reg-names: must be "comphy" as the first name, and "conf".
+- reg: must contain the comphy register location and length as the first
+    pair, followed by an optional configuration register address and
+    length pair.
+
+A sub-node is required for each comphy lane provided by the comphy.
+
+Required properties (child nodes):
+
+- reg: comphy lane number.
+- #phy-cells : from the generic phy bindings, must be 1. Defines the
+               input port to use for a given comphy lane.
+
+Example:
+
+	comphy: phy@18300 {
+		compatible = "marvell,armada-380-comphy";
+		reg-names = "comphy", "conf";
+		reg = <0x18300 0x100>, <0x18460 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpm_comphy0: phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		cpm_comphy1: phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
new file mode 100644
index 0000000000..c3a29c5fee
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
@@ -0,0 +1,18 @@
+* Atheros AR71XX/9XXX USB PHY
+
+Required properties:
+- compatible: "qca,ar7100-usb-phy"
+- #phys-cells: should be 0
+- reset-names: "phy"[, "suspend-override"]
+- resets: references to the reset controllers
+
+Example:
+
+	usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "phy", "suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt
new file mode 100644
index 0000000000..c4eb389025
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt
@@ -0,0 +1,72 @@
+This document explains only the device tree data binding. For general
+information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst
+
+PHY device node
+===============
+
+Required Properties:
+#phy-cells:	Number of cells in a PHY specifier;  The meaning of all those
+		cells is defined by the binding for the phy node. The PHY
+		provider can use the values in cells to find the appropriate
+		PHY.
+
+Optional Properties:
+phy-supply:	Phandle to a regulator that provides power to the PHY. This
+		regulator will be managed during the PHY power on/off sequence.
+
+For example:
+
+phys: phy {
+    compatible = "xxx";
+    reg = <...>;
+    .
+    .
+    #phy-cells = <1>;
+    .
+    .
+};
+
+That node describes an IP block (PHY provider) that implements 2 different PHYs.
+In order to differentiate between these 2 PHYs, an additional specifier should be
+given while trying to get a reference to it.
+
+PHY user node
+=============
+
+Required Properties:
+phys : the phandle for the PHY device (used by the PHY subsystem; not to be
+       confused with the Ethernet specific 'phy' and 'phy-handle' properties,
+       see Documentation/devicetree/bindings/net/ethernet.txt for these)
+phy-names : the names of the PHY corresponding to the PHYs present in the
+	    *phys* phandle
+
+Example 1:
+usb1: usb_otg_ss@xxx {
+    compatible = "xxx";
+    reg = <xxx>;
+    .
+    .
+    phys = <&usb2_phy>, <&usb3_phy>;
+    phy-names = "usb2phy", "usb3phy";
+    .
+    .
+};
+
+This node represents a controller that uses two PHYs, one for usb2 and one for
+usb3.
+
+Example 2:
+usb2: usb_otg_ss@xxx {
+    compatible = "xxx";
+    reg = <xxx>;
+    .
+    .
+    phys = <&phys 1>;
+    phy-names = "usbphy";
+    .
+    .
+};
+
+This node represents a controller that uses one of the PHYs of the PHY provider
+device defined previously. Note that the phy handle has an additional specifier
+"1" to differentiate between the two PHYs.
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
new file mode 100644
index 0000000000..37f028f7a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-cadence-sierra.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Sierra PHY
+
+description:
+  This binding describes the Cadence Sierra PHY. Sierra PHY supports multilink
+  multiprotocol combinations including protocols such as PCIe, USB etc.
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,sierra-phy-t0
+      - ti,sierra-phy-t0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: Sierra PHY reset.
+      - description: Sierra APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: sierra_reset
+      - const: sierra_apb
+
+  reg:
+    maxItems: 1
+    description:
+      Offset of the Sierra PHY configuration registers.
+
+  reg-names:
+    const: serdes
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: cmn_refclk_dig_div
+      - const: cmn_refclk1_dig_div
+      - const: pll0_refclk
+      - const: pll1_refclk
+
+  cdns,autoconf:
+    type: boolean
+    description:
+      A boolean property whose presence indicates that the PHY registers will be
+      configured by hardware. If not present, all sub-node optional properties
+      must be provided.
+
+patternProperties:
+  '^phy@[0-9a-f]$':
+    type: object
+    description:
+      Each group of PHY lanes with a single master lane should be represented as
+      a sub-node. Note that the actual configuration of each lane is determined
+      by hardware strapping, and must match the configuration specified here.
+    properties:
+      reg:
+        description:
+          The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 15
+
+      resets:
+        minItems: 1
+        maxItems: 4
+        description:
+          Contains list of resets, one per lane, to get all the link lanes out of reset.
+
+      "#phy-cells":
+        const: 0
+
+      cdns,phy-type:
+        description:
+          Specifies the type of PHY for which the group of PHY lanes is used.
+          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2, 4]
+
+      cdns,num-lanes:
+        description:
+          Number of lanes in this group. The group is made up of consecutive lanes.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 16
+
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 1
+
+    required:
+      - reg
+      - resets
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sierra-phy@fd240000 {
+            compatible = "cdns,sierra-phy-t0";
+            reg = <0x0 0xfd240000 0x0 0x40000>;
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "sierra_reset", "sierra_apb";
+            clocks = <&cmn_refclk_dig_div>, <&cmn_refclk1_dig_div>;
+            clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            pcie0_phy0: phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>;
+                cdns,num-lanes = <2>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+            };
+            pcie0_phy1: phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                cdns,num-lanes = <1>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
new file mode 100644
index 0000000000..dfb31314fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Torrent SD0801 PHY
+
+description:
+  This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
+  hardware included with the Cadence MHDP DisplayPort controller. Torrent
+  PHY also supports multilink multiprotocol combinations including protocols
+  such as PCIe, USB, SGMII, QSGMII etc.
+
+maintainers:
+  - Swapnil Jakhade <sjakhade@cadence.com>
+  - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,torrent-phy
+      - ti,j721e-serdes-10g
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    description:
+      PHY reference clock for 1 item. Must contain an entry in clock-names.
+      Optional Parent to enable output reference clock.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: refclk
+      - const: phy_en_refclk
+
+  reg:
+    minItems: 1
+    items:
+      - description: Offset of the Torrent PHY configuration registers.
+      - description: Offset of the DPTX PHY configuration registers.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: torrent_phy
+      - const: dptx_phy
+
+  resets:
+    minItems: 1
+    items:
+      - description: Torrent PHY reset.
+      - description: Torrent APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: torrent_reset
+      - const: torrent_apb
+
+patternProperties:
+  '^phy@[0-3]$':
+    type: object
+    description:
+      Each group of PHY lanes with a single master lane should be represented as a sub-node.
+    properties:
+      reg:
+        description:
+          The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 3
+
+      resets:
+        minItems: 1
+        maxItems: 4
+        description:
+          Contains list of resets, one per lane, to get all the link lanes out of reset.
+
+      "#phy-cells":
+        const: 0
+
+      cdns,phy-type:
+        description:
+          Specifies the type of PHY for which the group of PHY lanes is used.
+          Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 9
+
+      cdns,num-lanes:
+        description:
+          Number of lanes.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2, 3, 4]
+        default: 4
+
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      cdns,max-bit-rate:
+        description:
+          Maximum DisplayPort link bit rate to use, in Mbps
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
+        default: 8100
+
+    required:
+      - reg
+      - resets
+      - "#phy-cells"
+      - cdns,phy-type
+      - cdns,num-lanes
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        torrent-phy@f0fb500000 {
+            compatible = "cdns,torrent-phy";
+            reg = <0xf0 0xfb500000 0x0 0x00100000>,
+                  <0xf0 0xfb030a00 0x0 0x00000040>;
+            reg-names = "torrent_phy", "dptx_phy";
+            resets = <&phyrst 0>;
+            reset-names = "torrent_reset";
+            clocks = <&ref_clk>;
+            clock-names = "refclk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy@0 {
+                reg = <0>;
+                resets = <&phyrst 1>, <&phyrst 2>,
+                         <&phyrst 3>, <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_DP>;
+                cdns,num-lanes = <4>;
+                cdns,max-bit-rate = <8100>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/phy/phy-cadence.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        torrent-phy@f0fb500000 {
+            compatible = "cdns,torrent-phy";
+            reg = <0xf0 0xfb500000 0x0 0x00100000>;
+            reg-names = "torrent_phy";
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "torrent_reset", "torrent_apb";
+            clocks = <&ref_clk>;
+            clock-names = "refclk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>, <&phyrst 3>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+                cdns,num-lanes = <2>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_SGMII>;
+                cdns,num-lanes = <1>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
new file mode 100644
index 0000000000..2eb9b2b690
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
@@ -0,0 +1,40 @@
+Motorola CPCAP PMIC USB PHY binding
+
+Required properties:
+compatible: Shall be either "motorola,cpcap-usb-phy" or
+	    "motorola,mapphone-cpcap-usb-phy"
+#phy-cells: Shall be 0
+interrupts: CPCAP PMIC interrupts used by the USB PHY
+interrupt-names: Interrupt names
+io-channels: IIO ADC channels used by the USB PHY
+io-channel-names: IIO ADC channel names
+vusb-supply: Regulator for the PHY
+
+Optional properties:
+pinctrl: Optional alternate pin modes for the PHY
+pinctrl-names: Names for optional pin modes
+mode-gpios: Optional GPIOs for configuring alternate modes
+
+Example:
+cpcap_usb2_phy: phy {
+	compatible = "motorola,mapphone-cpcap-usb-phy";
+	pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+	pinctrl-1 = <&usb_ulpi_pins>;
+	pinctrl-2 = <&usb_utmi_pins>;
+	pinctrl-3 = <&uart3_pins>;
+	pinctrl-names = "default", "ulpi", "utmi", "uart";
+	#phy-cells = <0>;
+	interrupts-extended = <
+		&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+		&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+		&cpcap 48 1
+	>;
+	interrupt-names =
+		"id_ground", "id_float", "se0conn", "vbusvld",
+		"sessvld", "sessend", "se1", "dm", "dp";
+	mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+		      &gpio1 0 GPIO_ACTIVE_HIGH>;
+	io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+	io-channel-names = "vbus", "id";
+	vusb-supply = <&vusb>;
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
new file mode 100644
index 0000000000..c26478be39
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-da8xx-usb.txt
@@ -0,0 +1,40 @@
+TI DA8xx/OMAP-L1xx/AM18xx USB PHY
+
+Required properties:
+ - compatible: must be "ti,da830-usb-phy".
+ - #phy-cells: must be 1.
+
+This device controls the PHY for both the USB 1.1 OHCI and USB 2.0 OTG
+controllers on DA8xx SoCs. Consumers of this device should use index 0 for
+the USB 2.0 phy device and index 1 for the USB 1.1 phy device.
+
+It also requires a "syscon" node with compatible = "ti,da830-cfgchip", "syscon"
+to access the CFGCHIP2 register.
+
+Example:
+
+	cfgchip: cfgchip@1417c {
+		compatible = "ti,da830-cfgchip", "syscon";
+		reg = <0x1417c 0x14>;
+	};
+
+	usb_phy: usb-phy {
+		compatible = "ti,da830-usb-phy";
+		#phy-cells = <1>;
+	};
+
+	usb20: usb@200000 {
+		compatible = "ti,da830-musb";
+		reg = <0x200000 0x1000>;
+		interrupts = <58>;
+		phys = <&usb_phy 0>;
+		phy-names = "usb-phy";
+	};
+
+	usb11: usb@225000 {
+		compatible = "ti,da830-ohci";
+		reg = <0x225000 0x1000>;
+		interrupts = <59>;
+		phys = <&usb_phy 1>;
+		phy-names = "usb-phy";
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt
new file mode 100644
index 0000000000..17b0c76137
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt
@@ -0,0 +1,59 @@
+HiSilicon STB PCIE/SATA/USB3 PHY
+
+Required properties:
+- compatible: Should be "hisilicon,hi3798cv200-combphy"
+- reg: Should be the address space for COMBPHY configuration and state
+  registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and
+  PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC.
+- #phy-cells: Should be 1.  The cell number is used to select the phy mode
+  as defined in <dt-bindings/phy/phy.h>.
+- clocks: The phandle to clock provider and clock specifier pair.
+- resets: The phandle to reset controller and reset specifier pair.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Optional properties:
+- hisilicon,fixed-mode: If the phy device doesn't support mode select
+  but a fixed mode setting, the property should be present to specify
+  the particular mode.
+- hisilicon,mode-select-bits: If the phy device support mode select,
+  this property should be present to specify the register bits in
+  peripheral controller, as a 3 integers tuple:
+  <register_offset bit_shift bit_mask>.
+
+Notes:
+- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only
+  one of them should be present.
+- The device node should be a child of peripheral controller that contains
+  COMBPHY configuration/state and PERI_CTRL register used to select PHY mode.
+  Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller
+  bindings.
+
+Examples:
+
+perictrl: peripheral-controller@8a20000 {
+	compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+		     "simple-mfd";
+	reg = <0x8a20000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x8a20000 0x1000>;
+
+	combphy0: phy@850 {
+		compatible = "hisilicon,hi3798cv200-combphy";
+		reg = <0x850 0x8>;
+		#phy-cells = <1>;
+		clocks = <&crg HISTB_COMBPHY0_CLK>;
+		resets = <&crg 0x188 4>;
+		hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+	};
+
+	combphy1: phy@858 {
+		compatible = "hisilicon,hi3798cv200-combphy";
+		reg = <0x858 0x8>;
+		#phy-cells = <1>;
+		clocks = <&crg HISTB_COMBPHY1_CLK>;
+		resets = <&crg 0x188 12>;
+		hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt
new file mode 100644
index 0000000000..f17a56e215
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hi6220-usb.txt
@@ -0,0 +1,16 @@
+Hisilicon hi6220 usb PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hi6220-usb-phy"
+- #phy-cells: must be 0
+- hisilicon,peripheral-syscon: phandle of syscon used to control phy.
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+	usb_phy: usbphy {
+		compatible = "hisilicon,hi6220-usb-phy";
+		#phy-cells = <0>;
+		phy-supply = <&fixed_5v_hub>;
+		hisilicon,peripheral-syscon = <&sys_ctrl>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
new file mode 100644
index 0000000000..104953e849
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
@@ -0,0 +1,71 @@
+Device tree bindings for HiSilicon INNO USB2 PHY
+
+Required properties:
+- compatible: Should be one of the following strings:
+	"hisilicon,inno-usb2-phy",
+	"hisilicon,hi3798cv200-usb2-phy".
+- reg: Should be the address space for PHY configuration register in peripheral
+  controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.
+- clocks: The phandle and clock specifier pair for INNO USB2 PHY device
+  reference clock.
+- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset
+  signal.
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+
+The INNO USB2 PHY device should be a child node of peripheral controller that
+contains the PHY configuration register, and each device supports up to 2 PHY
+ports which are represented as child nodes of INNO USB2 PHY device.
+
+Required properties for PHY port node:
+- reg: The PHY port instance number.
+- #phy-cells: Defined by generic PHY bindings.  Must be 0.
+- resets: The phandle and reset specifier pair for PHY port reset signal.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+perictrl: peripheral-controller@8a20000 {
+	compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";
+	reg = <0x8a20000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x8a20000 0x1000>;
+
+	usb2_phy1: usb2-phy@120 {
+		compatible = "hisilicon,hi3798cv200-usb2-phy";
+		reg = <0x120 0x4>;
+		clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+		resets = <&crg 0xbc 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb2_phy1_port0: phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+			resets = <&crg 0xbc 8>;
+		};
+
+		usb2_phy1_port1: phy@1 {
+			reg = <1>;
+			#phy-cells = <0>;
+			resets = <&crg 0xbc 9>;
+		};
+	};
+
+	usb2_phy2: usb2-phy@124 {
+		compatible = "hisilicon,hi3798cv200-usb2-phy";
+		reg = <0x124 0x4>;
+		clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+		resets = <&crg 0xbc 6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb2_phy2_port0: phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+			resets = <&crg 0xbc 10>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt
new file mode 100644
index 0000000000..643948b6b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-lantiq-rcu-usb2.txt
@@ -0,0 +1,40 @@
+Lantiq XWAY SoC RCU USB 1.1/2.0 PHY binding
+===========================================
+
+This binding describes the USB PHY hardware provided by the RCU module on the
+Lantiq XWAY SoCs.
+
+This node has to be a sub node of the Lantiq RCU block.
+
+-------------------------------------------------------------------------------
+Required properties (controller (parent) node):
+- compatible	: Should be one of
+			"lantiq,ase-usb2-phy"
+			"lantiq,danube-usb2-phy"
+			"lantiq,xrx100-usb2-phy"
+			"lantiq,xrx200-usb2-phy"
+			"lantiq,xrx300-usb2-phy"
+- reg		: Defines the following sets of registers in the parent
+		  syscon device
+			- Offset of the USB PHY configuration register
+			- Offset of the USB Analog configuration
+			  register (only for xrx200 and xrx200)
+- clocks	: References to the (PMU) "phy" clk gate.
+- clock-names	: Must be "phy"
+- resets	: References to the RCU USB configuration reset bits.
+- reset-names	: Must be one of the following:
+			"phy" (optional)
+			"ctrl" (shared)
+
+-------------------------------------------------------------------------------
+Example for the USB PHYs on an xRX200 SoC:
+	usb_phy0: usb2-phy@18 {
+		compatible = "lantiq,xrx200-usb2-phy";
+		reg = <0x18 4>, <0x38 4>;
+
+		clocks = <&pmu PMU_GATE_USB0_PHY>;
+		clock-names = "phy";
+		resets = <&reset1 4 4>, <&reset0 4 4>;
+		reset-names = "phy", "ctrl";
+		#phy-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
new file mode 100644
index 0000000000..3bb821cd6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
@@ -0,0 +1,26 @@
+NXP LPC18xx/43xx internal USB OTG PHY binding
+---------------------------------------------
+
+This file contains documentation for the internal USB OTG PHY found
+in NXP LPC18xx and LPC43xx SoCs.
+
+Required properties:
+- compatible	: must be "nxp,lpc1850-usb-otg-phy"
+- clocks	: must be exactly one entry
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- #phy-cells	: must be 0 for this phy
+See: Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+The phy node must be a child of the creg syscon node.
+
+Example:
+creg: syscon@40043000 {
+	compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+	reg = <0x40043000 0x1000>;
+
+	usb0_otg_phy: phy {
+		compatible = "nxp,lpc1850-usb-otg-phy";
+		clocks = <&ccu1 CLK_USB0>;
+		#phy-cells = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt
new file mode 100644
index 0000000000..29427d4f04
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt
@@ -0,0 +1,29 @@
+Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY
+
+Required properties:
+- compatible		Must be "motorola,mapphone-mdm6600"
+- enable-gpios		GPIO to enable the USB PHY
+- power-gpios		GPIO to power on the device
+- reset-gpios		GPIO to reset the device
+- motorola,mode-gpios	Two GPIOs to configure MDM6600 USB start-up mode for
+			normal mode versus USB flashing mode
+- motorola,cmd-gpios	Three GPIOs to control the power state of the MDM6600
+- motorola,status-gpios	Three GPIOs to read the power state of the MDM6600
+
+Example:
+
+usb-phy {
+	compatible = "motorola,mapphone-mdm6600";
+	enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+			      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+	motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+				<&gpio2 21 GPIO_ACTIVE_HIGH>,
+				<&gpio2 23 GPIO_ACTIVE_HIGH>;
+	#phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
new file mode 100644
index 0000000000..89caa885d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
@@ -0,0 +1,117 @@
+STMicroelectronics STi MIPHY28LP PHY binding
+============================================
+
+This binding describes a miphy device that is used to control PHY hardware
+for SATA, PCIe or USB3.
+
+Required properties (controller (parent) node):
+- compatible	: Should be "st,miphy28lp-phy".
+- st,syscfg	: Should be a phandle of the system configuration register group
+		  which contain the SATA, PCIe or USB3 mode setting bits.
+
+Required nodes	:  A sub-node is required for each channel the controller
+		   provides. Address range information including the usual
+		   'reg' and 'reg-names' properties are used inside these
+		   nodes to describe the controller's topology. These nodes
+		   are translated by the driver's .xlate() function.
+
+Required properties (port (child) node):
+- #phy-cells	: Should be 1 (See second example)
+		  Cell after port phandle is device type from:
+			- PHY_TYPE_SATA
+			- PHY_TYPE_PCI
+			- PHY_TYPE_USB3
+- reg		: Address and length of the register set for the device.
+- reg-names	: The names of the register addresses corresponding to the registers
+		  filled in "reg". It can also contain the offset of the system configuration
+		  registers used as glue-logic to setup the device for SATA/PCIe or USB3
+		  devices.
+- st,syscfg	: Offset of the parent configuration register.
+- resets	: phandle to the parent reset controller.
+- reset-names	: Associated name must be "miphy-sw-rst".
+
+Optional properties (port (child) node):
+- st,osc-rdy		: to check the MIPHY0_OSC_RDY status in the glue-logic. This
+			  is not available in all the MiPHY. For example, for STiH407, only the
+			  MiPHY0 has this bit.
+- st,osc-force-ext	: to select the external oscillator. This can change from
+			  different MiPHY inside the same SoC.
+- st,sata_gen		: to select which SATA_SPDMODE has to be set in the SATA system config
+			  register.
+- st,px_rx_pol_inv	: to invert polarity of RXn/RXp (respectively negative line and positive
+			  line).
+- st,scc-on		: enable ssc to reduce effects of EMI (only for sata or PCIe).
+- st,tx-impedance-comp	: to compensate tx impedance avoiding out of range values.
+
+example:
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+				st,osc-rdy;
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+				st,osc-force-ext;
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
+
+
+Specifying phy control of devices
+=================================
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the miphy device node and an index
+specifying which configuration to use, as described in phy-bindings.txt.
+
+example:
+		sata0: sata@9b20000  {
+			...
+			phys		= <&phy_port0 PHY_TYPE_SATA>;
+			...
+		};
+
+Macro definitions for the supported miphy configuration can be found in:
+
+include/dt-bindings/phy/phy.h
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
new file mode 100644
index 0000000000..8772900e05
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
@@ -0,0 +1,77 @@
+STMicroelectronics STi MIPHY365x PHY binding
+============================================
+
+This binding describes a miphy device that is used to control PHY hardware
+for SATA and PCIe.
+
+Required properties (controller (parent) node):
+- compatible    : Should be "st,miphy365x-phy"
+- st,syscfg     : Phandle / integer array property. Phandle of sysconfig group
+		  containing the miphy registers and integer array should contain
+		  an entry for each port sub-node, specifying the control
+		  register offset inside the sysconfig group.
+
+Required nodes	:  A sub-node is required for each channel the controller
+		   provides. Address range information including the usual
+		   'reg' and 'reg-names' properties are used inside these
+		   nodes to describe the controller's topology. These nodes
+		   are translated by the driver's .xlate() function.
+
+Required properties (port (child) node):
+- #phy-cells 	: Should be 1 (See second example)
+		  Cell after port phandle is device type from:
+			- PHY_TYPE_SATA
+			- PHY_TYPE_PCI
+- reg        	: Address and length of register sets for each device in
+		  "reg-names"
+- reg-names     : The names of the register addresses corresponding to the
+		  registers filled in "reg":
+			- sata:   For SATA devices
+			- pcie:   For PCIe devices
+
+Optional properties (port (child) node):
+- st,sata-gen	     :	Generation of locally attached SATA IP. Expected values
+			are {1,2,3). If not supplied generation 1 hardware will
+			be expected
+- st,pcie-tx-pol-inv :	Bool property to invert the polarity PCIe Tx (Txn/Txp)
+- st,sata-tx-pol-inv :	Bool property to invert the polarity SATA Tx (Txn/Txp)
+
+Example:
+
+	miphy365x_phy: miphy365x@fe382000 {
+		compatible      = "st,miphy365x-phy";
+		st,syscfg  	= <&syscfg_rear 0x824 0x828>;
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		ranges;
+
+		phy_port0: port@fe382000 {
+			reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+			reg-names = "sata", "pcie";
+			#phy-cells = <1>;
+			st,sata-gen = <3>;
+		};
+
+		phy_port1: port@fe38a000 {
+			reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
+			reg-names = "sata", "pcie", "syscfg";
+			#phy-cells = <1>;
+			st,pcie-tx-pol-inv;
+		};
+	};
+
+Specifying phy control of devices
+=================================
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the phy port node and a device type.
+
+Example:
+
+#include <dt-bindings/phy/phy.h>
+
+	sata0: sata@fe380000 {
+		...
+		phys	  = <&phy_port0 PHY_TYPE_SATA>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
new file mode 100644
index 0000000000..5ffd0f55d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -0,0 +1,94 @@
+MVEBU comphy drivers
+--------------------
+
+COMPHY controllers can be found on the following Marvell MVEBU SoCs:
+* Armada 7k/8k (on the CP110)
+* Armada 3700
+It provides a number of shared PHYs used by various interfaces (network, SATA,
+USB, PCIe...).
+
+Required properties:
+
+- compatible: should be one of:
+  * "marvell,comphy-cp110" for Armada 7k/8k
+  * "marvell,comphy-a3700" for Armada 3700
+- reg: should contain the COMPHY register(s) location(s) and length(s).
+  * 1 entry for Armada 7k/8k
+  * 4 entries for Armada 3700 along with the corresponding reg-names
+    properties, memory areas are:
+    * Generic COMPHY registers
+    * Lane 1 (PCIe/GbE)
+    * Lane 0 (USB3/GbE)
+    * Lane 2 (SATA/USB3)
+- marvell,system-controller: should contain a phandle to the system
+			     controller node (only for Armada 7k/8k)
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional properlties:
+
+- clocks: pointers to the reference clocks for this device (CP110 only),
+          consequently: MG clock, MG Core clock, AXI clock.
+- clock-names: names of used clocks for CP110 only, must be :
+               "mg_clk", "mg_core_clk" and "axi_clk".
+
+A sub-node is required for each comphy lane provided by the comphy.
+
+Required properties (child nodes):
+
+- reg: COMPHY lane number.
+- #phy-cells : from the generic PHY bindings, must be 1. Defines the
+               input port to use for a given comphy lane.
+
+Examples:
+
+	CP11X_LABEL(comphy): phy@120000 {
+		compatible = "marvell,comphy-cp110";
+		reg = <0x120000 0x6000>;
+		marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+		clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+			 <&CP11X_LABEL(clk) 1 18>;
+		clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CP11X_LABEL(comphy0): phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		CP11X_LABEL(comphy1): phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+	};
+
+	comphy: phy@18300 {
+		compatible = "marvell,comphy-a3700";
+		reg = <0x18300 0x300>,
+		<0x1F000 0x400>,
+		<0x5C000 0x400>,
+		<0xe0178 0x8>;
+		reg-names = "comphy",
+		"lane1_pcie_gbe",
+		"lane0_usb3_gbe",
+		"lane2_sata_usb3";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+
+		comphy0: phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		comphy1: phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+
+		comphy2: phy@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu.txt b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
new file mode 100644
index 0000000000..64afdd13d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu.txt
@@ -0,0 +1,42 @@
+* Marvell MVEBU SATA PHY
+
+Power control for the SATA phy found on Marvell MVEBU SoCs.
+
+This document extends the binding described in phy-bindings.txt
+
+Required properties :
+
+ - reg		   : Offset and length of the register set for the SATA device
+ - compatible	   : Should be "marvell,mvebu-sata-phy"
+ - clocks	   : phandle of clock and specifier that supplies the device
+ - clock-names	   : Should be "sata"
+
+Example:
+		sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+		};
+
+Armada 375 USB cluster
+----------------------
+
+Armada 375 comes with an USB2 host and device controller and an USB3
+controller. The USB cluster control register allows to manage common
+features of both USB controllers.
+
+Required properties:
+
+- compatible: "marvell,armada-375-usb-cluster"
+- reg: Should contain usb cluster register location and length.
+- #phy-cells : from the generic phy bindings, must be 1. Possible
+values are 1 (USB2), 2 (USB3).
+
+Example:
+		usbcluster: usb-cluster@18400 {
+			compatible = "marvell,armada-375-usb-cluster";
+			reg = <0x18400 0x4>;
+			#phy-cells = <1>
+		};
diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
new file mode 100644
index 0000000000..d80e36a77e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
@@ -0,0 +1,18 @@
+Marvell PXA USB PHY
+-------------------
+
+Required properties:
+- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy",
+	"marvell,pxa168-usb-phy",
+- #phy-cells: must be 0
+
+Example:
+	usb-phy: usbphy@d4207000 {
+		compatible = "marvell,mmp2-usb-phy";
+		reg = <0xd4207000 0x40>;
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+This document explains the device tree binding. For general
+information about PHY subsystem refer to Documentation/driver-api/phy/phy.rst
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
new file mode 100644
index 0000000000..710cccd5ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt
@@ -0,0 +1,43 @@
+ROCKCHIP HDMI PHY WITH INNO IP BLOCK
+
+Required properties:
+ - compatible : should be one of the listed compatibles:
+	* "rockchip,rk3228-hdmi-phy",
+	* "rockchip,rk3328-hdmi-phy";
+ - reg : Address and length of the hdmi phy control register set
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must contain "sysclk" for system
+	  control and register configuration, "refoclk" for crystal-
+	  oscillator reference PLL clock input and "refpclk" for pclk-
+	  based refeference PLL clock input.
+ - #clock-cells: should be 0.
+ - clock-output-names : shall be the name for the output clock.
+ - interrupts : phandle + interrupt specified for the hdmiphy interrupt
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+
+Optional properties for rk3328-hdmi-phy:
+ - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
+ - nvmem-cell-names : "cpu-version" to read the chip version, required
+	  for adjustment to some frequency settings
+
+Example:
+	hdmi_phy: hdmi-phy@12030000 {
+		compatible = "rockchip,rk3228-hdmi-phy";
+		reg = <0x12030000 0x10000>;
+		#phy-cells = <0>;
+		clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		#clock-cells = <0>;
+		clock-output-names = "hdmi_phy";
+		status = "disabled";
+	};
+
+Then the PHY can be used in other nodes such as:
+
+	hdmi: hdmi@200a0000 {
+		compatible = "rockchip,rk3228-dw-hdmi";
+		...
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi";
+		...
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 0000000000..d3cd799787
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+      - rockchip,rk3588-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: apb
+
+  rockchip,enable-ssc:
+    type: boolean
+    description:
+      The option SSC can be enabled for U3, SATA and PCIE.
+      Most commercially available platforms use SSC to reduce EMI.
+
+  rockchip,ext-refclk:
+    type: boolean
+    description:
+      Many PCIe connections, especially backplane connections,
+      require a synchronous reference clock between the two link partners.
+      To achieve this a common clock source, referred to as REFCLK in
+      the PCI Express Card Electromechanical Specification,
+      should be used by both ends of the PCIe link.
+      In PCIe mode one can choose to use an internal or an external reference
+      clock.
+      By default the internal clock is selected. The PCIe PHY provides a 100MHz
+      differential clock output(optional with SSC) for system applications.
+      When selecting this option an externally 100MHz differential
+      reference clock needs to be provided to the PCIe PHY.
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are accessed through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are accessed through GRF regs.
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-naneng-combphy
+    then:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-naneng-combphy
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+      required:
+        - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipe-grf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>,
+               <&cru PCLK_PIPEPHY0>,
+               <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_PIPEPHY0>;
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
new file mode 100644
index 0000000000..960da7fcaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
@@ -0,0 +1,84 @@
+* ROCKCHIP type-c PHY
+---------------------
+
+Required properties:
+ - compatible : must be "rockchip,rk3399-typec-phy"
+ - reg: Address and length of the usb phy control register set
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
+ - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
+		    <&cru SCLK_UPHY1_TCPDCORE>;
+ - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
+ - resets : a list of phandle + reset specifier pairs
+ - reset-names : string reset name, must be:
+		 "uphy", "uphy-pipe", "uphy-tcphy"
+
+Optional properties:
+ - extcon : extcon specifier for the Power Delivery
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify dp or usb3 port,
+		 and shall be the following entries:
+	* "dp-port" : the name of DP port.
+	* "usb3-port" : the name of USB3 port.
+
+Required properties (port (child) node):
+- #phy-cells : must be 0, See ./phy-bindings.txt for details.
+
+Deprecated properties, do not use in new device tree sources, these
+properties are determined by the compatible value:
+ - rockchip,typec-conn-dir
+ - rockchip,usb3tousb2-en
+ - rockchip,external-psm
+ - rockchip,pipe-status
+
+Example:
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb0>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb1>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
new file mode 100644
index 0000000000..35f03df001
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -0,0 +1,24 @@
+ST STiH407 USB PHY controller
+
+This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3
+host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics.
+
+Required properties:
+- compatible		: should be "st,stih407-usb2-phy"
+- st,syscfg		: phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
+- resets		: list of phandle and reset specifier pairs. There should be two entries, one
+			  for the whole phy and one for the port
+- reset-names		: list of reset signal names. Should be "global" and "port"
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+usb2_picophy0: usbpicophy@f8 {
+	compatible	= "st,stih407-usb2-phy";
+	#phy-cells	= <0>;
+	st,syscfg	= <&syscfg_core 0x100 0xf4>;
+	resets		= <&softreset STIH407_PICOPHY_SOFTRESET>,
+			  <&picophyreset STIH407_PICOPHY0_RESET>;
+	reset-names	= "global", "port";
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
new file mode 100644
index 0000000000..24a3dbde22
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 USB HS PHY controller
+
+description:
+
+  The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
+  switch. It controls PHY configuration and status, and the UTMI+ switch that
+  selects either OTG or HOST controller for the second PHY port. It also sets
+  PLL configuration.
+
+  USBPHYC
+  |_ PLL
+  |
+  |_ PHY port#1 _________________ HOST controller
+  |                   __                 |
+  |                  / 1|________________|
+  |_ PHY port#2 ----|   |________________
+  |                  \_0|                |
+  |_ UTMI switch_______|          OTG controller
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-usbphyc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  vdda1v1-supply:
+    description: regulator providing 1V1 power supply to the PLL block
+
+  vdda1v8-supply:
+    description: regulator providing 1V8 power supply to the PLL block
+
+  '#clock-cells':
+    description: number of clock cells for ck_usbo_48m consumer
+    const: 0
+
+# Required child nodes:
+
+patternProperties:
+  "^usb-phy@[0|1]$":
+    type: object
+    description:
+      Each port the controller provides must be represented as a sub-node.
+
+    properties:
+      reg:
+        description: phy port index.
+        maxItems: 1
+
+      phy-supply:
+        description: regulator providing 3V3 power supply to the PHY.
+
+      "#phy-cells":
+        enum: [ 0x0, 0x1 ]
+
+      connector:
+        type: object
+        $ref: /schemas/connector/usb-connector.yaml
+        unevaluatedProperties: false
+
+        properties:
+          vbus-supply: true
+
+      # It can be necessary to adjust the PHY settings to compensate parasitics, which can be due
+      # to USB connector/receptacle, routing, ESD protection component,... Here is the list of
+      # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
+      # Speed, LS for Low-Speed)
+
+      st,current-boost-microamp:
+        description: Current boosting in uA
+        enum: [ 1000, 2000 ]
+
+      st,no-lsfs-fb-cap:
+        description: Disables the LS/FS feedback capacitor
+        type: boolean
+
+      st,decrease-hs-slew-rate:
+        description: Decreases the HS driver slew rate by 10%
+        type: boolean
+
+      st,tune-hs-dc-level:
+        description: |
+          Tunes the HS driver DC level
+          - <0> normal level
+          - <1> increases the level by 5 to 7 mV
+          - <2> increases the level by 10 to 14 mV
+          - <3> decreases the level by 5 to 7 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-fs-rftime-tuning:
+        description: Enables the FS rise/fall tuning option
+        type: boolean
+
+      st,enable-hs-rftime-reduction:
+        description: Enables the HS rise/fall reduction feature
+        type: boolean
+
+      st,trim-hs-current:
+        description: |
+          Controls HS driver current trimming for choke compensation
+          - <0> = 18.87 mA target current / nominal + 0%
+          - <1> = 19.165 mA target current / nominal + 1.56%
+          - <2> = 19.46 mA target current / nominal + 3.12%
+          - <3> = 19.755 mA target current / nominal + 4.68%
+          - <4> = 20.05 mA target current / nominal + 6.24%
+          - <5> = 20.345 mA target current / nominal + 7.8%
+          - <6> = 20.64 mA target current / nominal + 9.36%
+          - <7> = 20.935 mA target current / nominal + 10.92%
+          - <8> = 21.23 mA target current / nominal + 12.48%
+          - <9> = 21.525 mA target current / nominal + 14.04%
+          - <10> = 21.82 mA target current / nominal + 15.6%
+          - <11> = 22.115 mA target current / nominal + 17.16%
+          - <12> = 22.458 mA target current / nominal + 19.01%
+          - <13> = 22.755 mA target current / nominal + 20.58%
+          - <14> = 23.052 mA target current / nominal + 22.16%
+          - <15> = 23.348 mA target current / nominal + 23.73%
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      st,trim-hs-impedance:
+        description: |
+          Controls HS driver impedance tuning for choke compensation
+          - <0> = no impedance offset
+          - <1> = reduce the impedance by 2 ohms
+          - <2> = reduce the impedance by 4 ohms
+          - <3> = reduce the impedance by 6 ohms
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,tune-squelch-level:
+        description: |
+          Tunes the squelch DC threshold value
+          - <0> = no shift in threshold
+          - <1> = threshold shift by +7 mV
+          - <2> = threshold shift by -5 mV
+          - <3> = threshold shift by +14 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-hs-rx-gain-eq:
+        description: Enables the HS Rx gain equalizer
+        type: boolean
+
+      st,tune-hs-rx-offset:
+        description: |
+          Adjusts the HS Rx offset
+          - <0> = no offset
+          - <1> = offset of +5 mV
+          - <2> = offset of +10 mV
+          - <3> = offset of -5 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,no-hs-ftime-ctrl:
+        description: Disables the HS fall time control of single ended signals during pre-emphasis
+        type: boolean
+
+      st,no-lsfs-sc:
+        description: Disables the short circuit protection in LS/FS driver
+        type: boolean
+
+      st,enable-hs-tx-staggering:
+        description: Enables the basic staggering in HS Tx mode
+        type: boolean
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 0
+        then:
+          properties:
+            "#phy-cells":
+              const: 0
+        else:
+          properties:
+            "#phy-cells":
+              const: 1
+              description:
+                The value is used to select UTMI switch output.
+                0 for OTG controller and 1 for Host controller.
+
+    required:
+      - reg
+      - phy-supply
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - vdda1v1-supply
+  - vdda1v8-supply
+  - usb-phy@0
+  - usb-phy@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    usbphyc: usbphyc@5a006000 {
+        compatible = "st,stm32mp1-usbphyc";
+        reg = <0x5a006000 0x1000>;
+        clocks = <&rcc USBPHY_K>;
+        resets = <&rcc USBPHY_R>;
+        vdda1v1-supply = <&reg11>;
+        vdda1v8-supply = <&reg18>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #clock-cells = <0>;
+
+        usbphyc_port0: usb-phy@0 {
+            reg = <0>;
+            phy-supply = <&vdd_usb>;
+            #phy-cells = <0>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
+            connector {
+                compatible = "usb-a-connector";
+                vbus-supply = <&vbus_sw>;
+            };
+        };
+
+        usbphyc_port1: usb-phy@1 {
+            reg = <1>;
+            phy-supply = <&vdd_usb>;
+            #phy-cells = <1>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
new file mode 100644
index 0000000000..4790c6238a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 & Tegra234 P2U
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
+  Speed) each interfacing with 12 and 8 P2U instances respectively.
+  Tegra234 has three PHY bricks namely HSIO, NVHS and GBE (Gigabit Ethernet)
+  each interfacing with 8, 8 and 8 P2U instances respectively.
+  A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
+  interface and PHY of HSIO/NVHS/GBE bricks. Each P2U instance represents one
+  PCIe lane.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-p2u
+      - nvidia,tegra234-p2u
+
+  reg:
+    maxItems: 1
+    description: Should be the physical address space and length of respective each P2U instance.
+
+  reg-names:
+    items:
+      - const: ctl
+
+  nvidia,skip-sz-protect-en:
+    description: Should be present if two PCIe retimers are present between
+      the root port and its immediate downstream device.
+    type: boolean
+
+  '#phy-cells':
+    const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    p2u_hsio_0: phy@3e10000 {
+        compatible = "nvidia,tegra194-p2u";
+        reg = <0x03e10000 0x10000>;
+        reg-names = "ctl";
+
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt
new file mode 100644
index 0000000000..c7970c07ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt
@@ -0,0 +1,29 @@
+IMG Pistachio USB PHY
+=====================
+
+Required properties:
+--------------------
+ - compatible: Must be "img,pistachio-usb-phy".
+ - #phy-cells: Must be 0.  See ./phy-bindings.txt for details.
+ - clocks: Must contain an entry for each entry in clock-names.
+   See ../clock/clock-bindings.txt for details.
+ - clock-names: Must include "usb_phy".
+ - img,cr-top: Must contain a phandle to the CR_TOP syscon node.
+ - img,refclk: Indicates the reference clock source for the USB PHY.
+   See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values.
+
+Optional properties:
+--------------------
+ - phy-supply: USB VBUS supply.  Must supply 5.0V.
+
+Example:
+--------
+usb_phy: usb-phy {
+	compatible = "img,pistachio-usb-phy";
+	clocks = <&clk_core CLK_USB_PHY>;
+	clock-names = "usb_phy";
+	phy-supply = <&usb_vbus>;
+	img,refclk = <REFCLK_CLK_CORE>;
+	img,cr-top = <&cr_top>;
+	#phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
new file mode 100644
index 0000000000..da94426aa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
@@ -0,0 +1,18 @@
+* Marvell PXA1928 USB and HSIC PHYs
+
+Required properties:
+- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
+- reg: base address and length of the registers
+- clocks - A single clock. From common clock binding.
+- #phys-cells: should be 0. From common phy binding.
+- resets: reference to the reset controller
+
+Example:
+
+	usbphy: phy@7000 {
+		compatible = "marvell,pxa1928-usb-phy";
+		reg = <0x7000 0xe0>;
+		clocks = <&apmu_clocks PXA1928_CLK_USB>;
+		#phy-cells = <0>;
+	};
+
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
new file mode 100644
index 0000000000..6566353f1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm eDP PHY
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm eDP PHY is found in a number of Qualcomm platform and provides
+  the physical interface for Embedded Display Port.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-edp-phy
+      - qcom,sc8180x-edp-phy
+      - qcom,sc8280xp-dp-phy
+      - qcom,sc8280xp-edp-phy
+
+  reg:
+    items:
+      - description: PHY base register block
+      - description: tx0 register block
+      - description: tx1 register block
+      - description: PLL register block
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  vdda-phy-supply: true
+  vdda-pll-supply: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@aec2a00 {
+      compatible = "qcom,sc8180x-edp-phy";
+      reg = <0x0aec2a00 0x1c0>,
+            <0x0aec2200 0xa0>,
+            <0x0aec2600 0xa0>,
+            <0x0aec2000 0x19c>;
+
+      clocks = <&dispcc 0>, <&dispcc 1>;
+      clock-names = "aux", "cfg_ahb";
+
+      #clock-cells = <1>;
+      #phy-cells = <0>;
+
+      vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+      vdda-pll-supply = <&vdd_a_edp_0_0p9>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
new file mode 100644
index 0000000000..0c8f03b786
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8660
+      - qcom,hdmi-phy-8960
+      - qcom,hdmi-phy-8974
+      - qcom,hdmi-phy-8084
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hdmi_phy
+      - const: hdmi_pll
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#clock-cells':
+    const: 0
+
+  '#phy-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8660
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: slave_iface
+        vddio-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8960
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+        clock-names:
+          minItems: 1
+          items:
+            - const: slave_iface
+            - const: pxo
+        vddio-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8084
+              - qcom,hdmi-phy-8974
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: iface
+            - const: alt_iface
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_phy: phy@4a00400 {
+      compatible = "qcom,hdmi-phy-8960";
+      reg-names = "hdmi_phy",
+                  "hdmi_pll";
+      reg = <0x4a00400 0x60>,
+            <0x4a00500 0x100>;
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+      power-domains = <&mmcc 1>;
+      clock-names = "slave_iface", "pxo";
+      clocks = <&clk 21>, <&pxo_board>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
new file mode 100644
index 0000000000..83fe4b39b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon QMP HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8996
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: hdmi_pll
+      - const: hdmi_tx_l0
+      - const: hdmi_tx_l1
+      - const: hdmi_tx_l2
+      - const: hdmi_tx_l3
+      - const: hdmi_phy
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: ref
+      - const: xo
+
+  power-domains:
+    maxItems: 1
+
+  vcca-supply:
+    description: phandle to VCCA supply regulator
+
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#clock-cells':
+    const: 0
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@9a0600 {
+      compatible = "qcom,hdmi-phy-8996";
+      reg = <0x009a0600 0x1c4>,
+            <0x009a0a00 0x124>,
+            <0x009a0c00 0x124>,
+            <0x009a0e00 0x124>,
+            <0x009a1000 0x124>,
+            <0x009a1200 0x0c8>;
+      reg-names = "hdmi_pll",
+                  "hdmi_tx_l0",
+                  "hdmi_tx_l1",
+                  "hdmi_tx_l2",
+                  "hdmi_tx_l3",
+                  "hdmi_phy";
+
+      clocks = <&mmcc 116>,
+               <&gcc 214>,
+               <&xo_board>;
+      clock-names = "iface",
+                    "ref",
+                    "xo";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      vddio-supply = <&vreg_l12a_1p8>;
+      vcca-supply = <&vreg_l28a_0p925>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
new file mode 100644
index 0000000000..2671a048c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-hsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: M31 USB PHY
+
+maintainers:
+  - Sricharan Ramabadhran <quic_srichara@quicinc.com>
+  - Varadarajan Narayanan <quic_varada@quicinc.com>
+
+description:
+  USB M31 PHY (https://www.m31tech.com) found in Qualcomm
+  IPQ5018, IPQ5332 SoCs.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,ipq5332-usb-hsphy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cfg_ahb
+
+  resets:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Phandle to 5V regulator supply to PHY digital circuit.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+    usb-phy@7b000 {
+        compatible = "qcom,ipq5332-usb-hsphy";
+        reg = <0x0007b000 0x12c>;
+
+        clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+        clock-names = "cfg_ahb";
+
+        #phy-cells = <0>;
+
+        resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+        vdd-supply = <&regulator_fixed_5p0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
new file mode 100644
index 0000000000..35296c588e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-hs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x usb DWC3 HS PHY CONTROLLER
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+  DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+  controllers used in ipq806x. Each DWC3 PHY controller should have its
+  own node.
+
+properties:
+  compatible:
+    const: qcom,ipq806x-usb-phy-hs
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: xo
+
+required:
+  - compatible
+  - "#phy-cells"
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    hs_phy_0: phy@110f8800 {
+      compatible = "qcom,ipq806x-usb-phy-hs";
+      reg = <0x110f8800 0x30>;
+      clocks = <&gcc USB30_0_UTMI_CLK>;
+      clock-names = "ref";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
new file mode 100644
index 0000000000..6cf5c6c060
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-ss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x usb DWC3 SS PHY CONTROLLER
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+  DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+  controllers used in ipq806x. Each DWC3 PHY controller should have its
+  own node.
+
+properties:
+  compatible:
+    const: qcom,ipq806x-usb-phy-ss
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: xo
+
+  qcom,rx-eq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for rx_eq.
+    default: 4
+    maximum: 7
+
+  qcom,tx-deamp-3_5db:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for transmit preemphasis.
+    default: 23
+    maximum: 63
+
+  qcom,mpll:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Override value for mpll.
+    default: 0
+    maximum: 7
+
+required:
+  - compatible
+  - "#phy-cells"
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    ss_phy_0: phy@110f8830 {
+      compatible = "qcom,ipq806x-usb-phy-ss";
+      reg = <0x110f8830 0x30>;
+      clocks = <&gcc USB30_0_MASTER_CLK>;
+      clock-names = "ref";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
new file mode 100644
index 0000000000..634cec5d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq8074-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, IPQ8074)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-pcie-phy
+      - qcom,ipq8074-qmp-gen3-pcie-phy
+      - qcom,ipq8074-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: pipe
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+
+    phy@84000 {
+        compatible = "qcom,ipq6018-qmp-pcie-phy";
+        reg = <0x00084000 0x1000>;
+
+        clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+                 <&gcc GCC_PCIE0_AHB_CLK>,
+                 <&gcc GCC_PCIE0_PIPE_CLK>;
+        clock-names = "aux",
+                      "cfg_ahb",
+                      "pipe";
+
+        clock-output-names = "gcc_pcie0_pipe_clk_src";
+        #clock-cells = <0>;
+
+        #phy-cells = <0>;
+
+        resets = <&gcc GCC_PCIE0_PHY_BCR>,
+                 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+        reset-names = "phy",
+                      "common";
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
new file mode 100644
index 0000000000..4e710ef755
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (MSM8996 PCIe)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    const: qcom,msm8996-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+      - const: cfg
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: one child node per PHY provided by this block
+    properties:
+      reg:
+        items:
+          - description: TX
+          - description: RX
+          - description: PCS
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - enum:
+              - pipe0
+              - pipe1
+              - pipe2
+
+      resets:
+        items:
+          - description: PHY reset
+
+      reset-names:
+        deprecated: true
+        items:
+          - enum:
+              - lane0
+              - lane1
+              - lane2
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - resets
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    pcie_phy: phy-wrapper@34000 {
+        compatible = "qcom,msm8996-qmp-pcie-phy";
+        reg = <0x34000 0x488>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x34000 0x4000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_CLKREF_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref";
+
+        resets = <&gcc GCC_PCIE_PHY_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+        reset-names = "phy", "common", "cfg";
+
+        vdda-phy-supply = <&vreg_l28a_0p925>;
+        vdda-pll-supply = <&vreg_l12a_1p8>;
+
+        pciephy_0: phy@1000 {
+            reg = <0x1000 0x130>,
+                  <0x1200 0x200>,
+                  <0x1400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_0_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_1: phy@2000 {
+            reg = <0x2000 0x130>,
+                  <0x2200 0x200>,
+                  <0x2400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_2: phy@3000 {
+            reg = <0x3000 0x130>,
+                  <0x3200 0x200>,
+                  <0x3400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_2_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
new file mode 100644
index 0000000000..827109d370
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, MSM8996)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
+  qcom,sc8280xp-qmp-usb3-uni-phy.yaml.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-usb3-phy
+      - qcom,ipq8074-qmp-usb3-phy
+      - qcom,msm8996-qmp-usb3-phy
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sdx55-qmp-usb3-uni-phy
+      - qcom,sdx65-qmp-usb3-uni-phy
+      - qcom,sm8150-qmp-usb3-uni-phy
+      - qcom,sm8250-qmp-usb3-uni-phy
+      - qcom,sm8350-qmp-usb3-uni-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    maxItems: 2
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-usb3-phy
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_2_qmpphy: phy-wrapper@88eb000 {
+        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+        reg = <0x088eb000 0x18c>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x088eb000 0x2000>;
+
+        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                 <&gcc GCC_USB3_PHY_SEC_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_2_ssphy: phy@200 {
+                reg = <0x200 0x128>,
+                      <0x400 0x1fc>,
+                      <0x800 0x218>,
+                      <0x600 0x70>;
+
+                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+
+                #clock-cells = <0>;
+                clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+                #phy-cells = <0>;
+            };
+        };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
new file mode 100644
index 0000000000..d05eef0e1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, MSM8998)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    const: qcom,msm8998-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: pipe
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+    phy@1c18000 {
+        compatible = "qcom,msm8998-qmp-pcie-phy";
+        reg = <0x01c06000 0x1000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_CLKREF_CLK>,
+                 <&gcc GCC_PCIE_0_PIPE_CLK>;
+        clock-names = "aux",
+                      "cfg_ahb",
+                      "ref",
+                      "pipe";
+
+        clock-output-names = "pcie_0_pipe_clk_src";
+        #clock-cells = <0>;
+
+        #phy-cells = <0>;
+
+        resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l2a_1p2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml
new file mode 100644
index 0000000000..dbc4a4c71f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,pcie2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe2 PHY controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm
+  platforms.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qcs404-pcie2-phy
+      - const: qcom,pcie2-phy
+
+  reg:
+    items:
+      - description: PHY register set
+
+  clocks:
+    items:
+      - description: a clock-specifier pair for the "pipe" clock
+
+  clock-output-names:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  "#phy-cells":
+    const: 0
+
+  vdda-vp-supply:
+    description: low voltage regulator
+
+  vdda-vph-supply:
+    description: high voltage regulator
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: pipe
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+  - "#clock-cells"
+  - "#phy-cells"
+  - vdda-vp-supply
+  - vdda-vph-supply
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    phy@7786000 {
+      compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
+      reg = <0x07786000 0xb8>;
+
+      clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+      resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
+               <&gcc GCC_PCIE_0_PIPE_ARES>;
+      reset-names = "phy", "pipe";
+
+      vdda-vp-supply = <&vreg_l3_1p05>;
+      vdda-vph-supply = <&vreg_l5_1p8>;
+
+      clock-output-names = "pcie_0_pipe_clk";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
new file mode 100644
index 0000000000..95eecbaef0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QUSB2 phy controller
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+  QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq6018-qusb2-phy
+              - qcom,ipq8074-qusb2-phy
+              - qcom,ipq9574-qusb2-phy
+              - qcom,msm8953-qusb2-phy
+              - qcom,msm8996-qusb2-phy
+              - qcom,msm8998-qusb2-phy
+              - qcom,qcm2290-qusb2-phy
+              - qcom,sdm660-qusb2-phy
+              - qcom,sm4250-qusb2-phy
+              - qcom,sm6115-qusb2-phy
+      - items:
+          - enum:
+              - qcom,sc7180-qusb2-phy
+              - qcom,sdm670-qusb2-phy
+              - qcom,sdm845-qusb2-phy
+              - qcom,sm6350-qusb2-phy
+          - const: qcom,qusb2-v2-phy
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: phy config clock
+      - description: 19.2 MHz ref clk
+      - description: phy interface clock (Optional)
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: cfg_ahb
+      - const: ref
+      - const: iface
+
+  vdd-supply:
+    description:
+      Phandle to 0.9V regulator supply to PHY digital circuit.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vdda-phy-dpdm-supply:
+    description:
+      Phandle to 3.1V regulator supply to Dp/Dm port signals.
+
+  resets:
+    maxItems: 1
+    description:
+      Phandle to reset to phy block.
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Phandle to nvmem cell that contains 'HS Tx trim'
+      tuning parameter value for qusb2 phy.
+
+  qcom,tcsr-syscon:
+    description:
+      Phandle to TCSR syscon register region.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  qcom,imp-res-offset-value:
+    description:
+      It is a 6 bit value that specifies offset to be
+      added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
+      tuning parameter that may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 0
+
+  qcom,bias-ctrl-value:
+    description:
+      It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
+      tuning parameter that may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    default: 32
+
+  qcom,charge-ctrl-value:
+    description:
+      It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
+      tuning parameter that may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  qcom,hstx-trim-value:
+    description:
+      It is a 4 bit value that specifies tuning for HSTX
+      output current.
+      Possible range is - 15mA to 24mA (stepsize of 600 uA).
+      See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 3
+
+  qcom,preemphasis-level:
+    description:
+      It is a 2 bit value that specifies pre-emphasis level.
+      Possible range is 0 to 15% (stepsize of 5%).
+      See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 2
+
+  qcom,preemphasis-width:
+    description:
+      It is a 1 bit value that specifies how long the HSTX
+      pre-emphasis (specified using qcom,preemphasis-level) must be in
+      effect. Duration could be half-bit of full-bit.
+      See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  qcom,hsdisc-trim-value:
+    description:
+      It is a 2 bit value tuning parameter that control disconnect
+      threshold and may vary for different boards of same SOC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda-pll-supply
+  - vdda-phy-dpdm-supply
+  - resets
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: qcom,qusb2-v2-phy
+    then:
+      properties:
+        qcom,imp-res-offset-value: false
+        qcom,bias-ctrl-value: false
+        qcom,charge-ctrl-value: false
+        qcom,hstx-trim-value: false
+        qcom,preemphasis-level: false
+        qcom,preemphasis-width: false
+        qcom,hsdisc-trim-value: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    hsusb_phy: phy@7411000 {
+        compatible = "qcom,msm8996-qusb2-phy";
+        reg = <0x7411000 0x180>;
+        #phy-cells = <0>;
+
+        clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+        clock-names = "cfg_ahb", "ref";
+
+        vdd-supply = <&pm8994_l28>;
+        vdda-pll-supply = <&pm8994_l12>;
+        vdda-phy-dpdm-supply = <&pm8994_l24>;
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+        nvmem-cells = <&qusb2p_hstx_trim>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
new file mode 100644
index 0000000000..b9107759b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sa8775p-dwmac-sgmii-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SerDes/SGMII ethernet PHY controller
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  The SerDes PHY sits between the MAC and the external PHY and provides
+  separate Rx Tx lines.
+
+properties:
+  compatible:
+    const: qcom,sa8775p-dwmac-sgmii-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sgmi_ref
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY.
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    serdes_phy: phy@8901000 {
+        compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+        reg = <0x08901000 0xe10>;
+        clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+        clock-names = "sgmi_ref";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
new file mode 100644
index 0000000000..2c3d6553a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-qmp-gen4x2-pcie-phy
+      - qcom,sa8775p-qmp-gen4x4-pcie-phy
+      - qcom,sc8180x-qmp-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x1-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x2-pcie-phy
+      - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdx55-qmp-pcie-phy
+      - qcom,sdx65-qmp-gen4x2-pcie-phy
+      - qcom,sm8150-qmp-gen3x1-pcie-phy
+      - qcom,sm8150-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-gen3x1-pcie-phy
+      - qcom,sm8250-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8350-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen4x2-pcie-phy
+      - qcom,sm8550-qmp-gen3x2-pcie-phy
+      - qcom,sm8550-qmp-gen4x2-pcie-phy
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 5
+    maxItems: 7
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - enum: [rchng, refgen]
+      - const: pipe
+      - const: pipediv2
+      - const: phy_aux
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: phy
+      - const: phy_nocsr
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vdda-qref-supply: true
+
+  qcom,4ln-config-sel:
+    description: PCIe 4-lane configuration
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of TCSR syscon
+          - description: offset of PCIe 4-lane configuration register
+          - description: offset of configuration bit for this PHY
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+    then:
+      properties:
+        reg:
+          items:
+            - description: port a
+            - description: port b
+      required:
+        - qcom,4ln-config-sel
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8150-qmp-gen3x1-pcie-phy
+              - qcom,sm8150-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8350-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x2-pcie-phy
+              - qcom,sm8550-qmp-gen3x2-pcie-phy
+              - qcom,sm8550-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x1-pcie-phy
+              - qcom,sc8280xp-qmp-gen3x2-pcie-phy
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-qmp-gen4x2-pcie-phy
+              - qcom,sa8775p-qmp-gen4x4-pcie-phy
+    then:
+      properties:
+        clocks:
+          minItems: 7
+        clock-names:
+          minItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+    else:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    pcie2b_phy: phy@1c18000 {
+      compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+      reg = <0x01c18000 0x2000>;
+
+      clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+               <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+               <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+               <&gcc GCC_PCIE_2B_PIPE_CLK>,
+               <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+      clock-names = "aux", "cfg_ahb", "ref", "rchng",
+                    "pipe", "pipediv2";
+
+      power-domains = <&gcc PCIE_2B_GDSC>;
+
+      resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+      reset-names = "phy";
+
+      vdda-phy-supply = <&vreg_l6d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      #clock-cells = <0>;
+      clock-output-names = "pcie_2b_pipe_clk";
+
+      #phy-cells = <0>;
+    };
+
+    pcie2a_phy: phy@1c24000 {
+      compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+      reg = <0x01c24000 0x2000>, <0x01c26000 0x2000>;
+
+      clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+               <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+               <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+               <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+               <&gcc GCC_PCIE_2A_PIPE_CLK>,
+               <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+      clock-names = "aux", "cfg_ahb", "ref", "rchng",
+                    "pipe", "pipediv2";
+
+      power-domains = <&gcc PCIE_2A_GDSC>;
+
+      resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+      reset-names = "phy";
+
+      vdda-phy-supply = <&vreg_l6d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+      #clock-cells = <0>;
+      clock-output-names = "pcie_2a_pipe_clk";
+
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
new file mode 100644
index 0000000000..d981d77e82
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (UFS, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-qmp-ufs-phy
+      - qcom,msm8998-qmp-ufs-phy
+      - qcom,sa8775p-qmp-ufs-phy
+      - qcom,sc8180x-qmp-ufs-phy
+      - qcom,sc8280xp-qmp-ufs-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sm6115-qmp-ufs-phy
+      - qcom,sm6125-qmp-ufs-phy
+      - qcom,sm6350-qmp-ufs-phy
+      - qcom,sm7150-qmp-ufs-phy
+      - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8250-qmp-ufs-phy
+      - qcom,sm8350-qmp-ufs-phy
+      - qcom,sm8450-qmp-ufs-phy
+      - qcom,sm8550-qmp-ufs-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ref
+      - const: ref_aux
+      - const: qref
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ufsphy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+              - qcom,sm6125-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm7150-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+              - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8550-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    ufs_mem_phy: phy@1d87000 {
+        compatible = "qcom,sc8280xp-qmp-ufs-phy";
+        reg = <0x01d87000 0x1000>;
+
+        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+        clock-names = "ref", "ref_aux";
+
+        power-domains = <&gcc UFS_PHY_GDSC>;
+
+        resets = <&ufs_mem_hc 0>;
+        reset-names = "ufsphy";
+
+        vdda-phy-supply = <&vreg_l6b>;
+        vdda-pll-supply = <&vreg_l3b>;
+
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
new file mode 100644
index 0000000000..f99fbbcd68
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq9574-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sa8775p-qmp-usb3-uni-phy
+      - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sm6115-qmp-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-qmp-usb3-phy
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: com_aux
+            - const: pipe
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@88ef000 {
+      compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+      reg = <0x088ef000 0x2000>;
+
+      clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+               <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+               <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+      clock-names = "aux", "ref", "com_aux", "pipe";
+
+      power-domains = <&gcc USB30_MP_GDSC>;
+
+      resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+               <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+      reset-names = "phy", "phy_phy";
+
+      vdda-phy-supply = <&vreg_l3a>;
+      vdda-pll-supply = <&vreg_l5a>;
+
+      #clock-cells = <0>;
+      clock-output-names = "usb2_phy0_pipe_clk";
+
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
new file mode 100644
index 0000000000..fa7408eb74
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP USB4-USB3-DP PHY controller (SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-qmp-usb3-dp-phy
+      - qcom,sc7280-qmp-usb3-dp-phy
+      - qcom,sc8180x-qmp-usb3-dp-phy
+      - qcom,sc8280xp-qmp-usb43dp-phy
+      - qcom,sdm845-qmp-usb3-dp-phy
+      - qcom,sm6350-qmp-usb3-dp-phy
+      - qcom,sm8150-qmp-usb3-dp-phy
+      - qcom,sm8250-qmp-usb3-dp-phy
+      - qcom,sm8350-qmp-usb3-dp-phy
+      - qcom,sm8450-qmp-usb3-dp-phy
+      - qcom,sm8550-qmp-usb3-dp-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: aux
+      - const: ref
+      - const: com_aux
+      - const: usb3_pipe
+      - const: cfg_ahb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 1
+    description:
+      See include/dt-bindings/phy/phy-qcom-qmp.h
+
+  "#phy-cells":
+    const: 1
+    description:
+      See include/dt-bindings/phy/phy-qcom-qmp.h
+
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the DisplayPort controller
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-qmp-usb3-dp-phy
+            - qcom,sdm845-qmp-usb3-dp-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-qmp-usb43dp-phy
+            - qcom,sm6350-qmp-usb3-dp-phy
+            - qcom,sm8550-qmp-usb3-dp-phy
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    phy@88eb000 {
+      compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+      reg = <0x088eb000 0x4000>;
+
+      clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+               <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+               <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+               <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+      clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+      power-domains = <&gcc USB30_PRIM_GDSC>;
+
+      resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+               <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
+      reset-names = "phy", "common";
+
+      vdda-phy-supply = <&vreg_l9d>;
+      vdda-pll-supply = <&vreg_l4d>;
+
+      orientation-switch;
+
+      #clock-cells = <1>;
+      #phy-cells = <1>;
+
+      ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+              reg = <0>;
+
+              endpoint {
+                  remote-endpoint = <&typec_connector_ss>;
+              };
+          };
+
+          port@1 {
+              reg = <1>;
+
+              endpoint {
+                  remote-endpoint = <&dwc3_ss_out>;
+              };
+          };
+
+          port@2 {
+              reg = <2>;
+
+              endpoint {
+                  remote-endpoint = <&mdss_dp_out>;
+              };
+          };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
new file mode 100644
index 0000000000..c53bab107b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SNPS eUSB2 phy controller
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  eUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
+
+properties:
+  compatible:
+    const: qcom,sm8550-snps-eusb2-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: ref
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description:
+      Phandle to eUSB2 to USB 2.0 repeater
+
+  vdd-supply:
+    description:
+      Phandle to 0.88V regulator supply to PHY digital circuit.
+
+  vdda12-supply:
+    description:
+      Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda12-supply
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
+
+    usb_1_hsphy: phy@88e3000 {
+        compatible = "qcom,sm8550-snps-eusb2-phy";
+        reg = <0x88e3000 0x154>;
+        #phy-cells = <0>;
+
+        clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>;
+        clock-names = "ref";
+
+        vdd-supply = <&vreg_l1e_0p88>;
+        vdda12-supply = <&vreg_l3e_1p2>;
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
new file mode 100644
index 0000000000..24c733c10e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-repeater.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Synopsis eUSB2 to USB 2.0 repeater
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  eUSB2 repeater converts between eUSB2 and USB 2.0 signaling levels and
+  allows a eUSB2 PHY to connect to legacy USB 2.0 products
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pm7550ba-eusb2-repeater
+          - const: qcom,pm8550b-eusb2-repeater
+      - const: qcom,pm8550b-eusb2-repeater
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdd18-supply: true
+
+  vdd3-supply: true
+
+  qcom,tune-usb2-disc-thres:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed disconnect threshold
+    minimum: 0
+    maximum: 7
+    default: 0
+
+  qcom,tune-usb2-amplitude:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed trasmit amplitude
+    minimum: 0
+    maximum: 15
+    default: 8
+
+  qcom,tune-usb2-preem:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: High-Speed TX pre-emphasis tuning
+    minimum: 0
+    maximum: 7
+    default: 5
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@7 {
+      reg = <0x7 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pm8550b_eusb2_repeater: phy@fd00 {
+        compatible = "qcom,pm8550b-eusb2-repeater";
+        reg = <0xfd00>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt
new file mode 100644
index 0000000000..2cb2168cef
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt
@@ -0,0 +1,76 @@
+Qualcomm's APQ8016/MSM8916 USB transceiver controller
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,usb-8x16-phy".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: USB PHY base address and length of the register map
+
+- clocks:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: See clock-bindings.txt section "consumers". List of
+                two clock specifiers for interface and core controller
+                clocks.
+
+- clock-names:
+    Usage: required
+    Value type: <string>
+    Definition: Must contain "iface" and "core" strings.
+
+- vddcx-supply:
+    Usage: required
+    Value type: <phandle>
+    Definition: phandle to the regulator VDCCX supply node.
+
+- v1p8-supply:
+    Usage: required
+    Value type: <phandle>
+    Definition: phandle to the regulator 1.8V supply node.
+
+- v3p3-supply:
+    Usage: required
+    Value type: <phandle>
+    Definition: phandle to the regulator 3.3V supply node.
+
+- resets:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: See reset.txt section "consumers". PHY reset specifier.
+
+- reset-names:
+    Usage: required
+    Value type: <string>
+    Definition: Must contain "phy" string.
+
+- switch-gpio:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: Some boards are using Dual SPDT USB Switch, witch is
+                controlled by GPIO to de/multiplex D+/D- USB lines
+                between connectors.
+
+Example:
+	usb_phy: phy@78d9000 {
+		compatible = "qcom,usb-8x16-phy";
+		reg = <0x78d9000 0x400>;
+
+		vddcx-supply = <&pm8916_s1_corner>;
+		v1p8-supply = <&pm8916_l7>;
+		v3p3-supply = <&pm8916_l13>;
+
+		clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+			     <&gcc GCC_USB_HS_SYSTEM_CLK>;
+		clock-names = "iface", "core";
+
+		resets = <&gcc GCC_USB2A_PHY_BCR>;
+		reset-names = "phy";
+
+		// D+/D- lines: 1 - Routed to HUB, 0 - Device connector
+		switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+	};
+
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
new file mode 100644
index 0000000000..6c99e02b2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-hs-28nm-femtophy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc ref clock
+      - description: PHY AHB clock
+      - description: Rentention clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: sleep
+
+  resets:
+    items:
+      - description: PHY core reset
+      - description: POR reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: por
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda3p3-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdd-supply
+  - vdda1p8-supply
+  - vdda3p3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb2_phy_prim: phy@7a000 {
+        compatible = "qcom,usb-hs-28nm-femtophy";
+        reg = <0x0007a000 0x200>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+        clock-names = "ref", "ahb", "sleep";
+        resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+                 <&gcc GCC_USB2A_PHY_BCR>;
+        reset-names = "phy", "por";
+        vdd-supply = <&vreg_l4_1p2>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+        vdda3p3-supply = <&vreg_l12_3p3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
new file mode 100644
index 0000000000..f042d6af15
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's USB HS PHY
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8960
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    reset-names:
+      const: por
+
+else:
+  properties:
+    resets:
+      minItems: 2
+      maxItems: 2
+
+    reset-names:
+      items:
+        - const: phy
+        - const: por
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8226
+          - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8960
+          - qcom,usb-hs-phy-msm8974
+      - const: qcom,usb-hs-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+    contains:
+      items:
+        - const: ref
+        - const: sleep
+
+  resets: true
+
+  reset-names: true
+
+  v1p8-supply: true
+
+  v3p3-supply: true
+
+  extcon: true
+
+  "#phy-cells":
+    const: 0
+
+  qcom,init-seq:
+    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+    description: >
+      Sequence of ULPI address and value pairs to
+      program into the ULPI_EXT_VENDOR_SPECIFIC area.
+      This is related to Device Mode Eye Diagram test.
+    maxItems: 32 # no hard limit
+    items:
+      items:
+        - description: >
+            the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address
+        - description: value
+
+required:
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    otg: usb-controller {
+      #reset-cells = <1>;
+
+      ulpi {
+        phy {
+          compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
+          #phy-cells = <0>;
+          clocks = <&clk 0>, <&clk 258>;
+          clock-names = "ref", "sleep";
+          resets = <&gcc 10>, <&otg 0>;
+          reset-names = "phy", "por";
+          v3p3-supply = <&pm8941_l24>;
+          v1p8-supply = <&pm8941_l6>;
+          extcon = <&smbb>;
+          qcom,init-seq = /bits/ 8 <0x1 0x63>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.yaml
new file mode 100644
index 0000000000..077e13a944
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-hsic-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm USB HSIC PHY Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,usb-hsic-phy-mdm9615
+          - qcom,usb-hsic-phy-msm8974
+      - const: qcom,usb-hsic-phy
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: phy
+      - const: cal
+      - const: cal_sleep
+
+  "#phy-cells":
+    const: 0
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    items:
+      - const: init
+      - const: default
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - pinctrl-0
+  - pinctrl-1
+  - pinctrl-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    phy {
+        compatible = "qcom,usb-hsic-phy-msm8974",
+                     "qcom,usb-hsic-phy";
+        clocks = <&gcc GCC_USB_HSIC_CLK>,
+                 <&gcc GCC_USB_HSIC_IO_CAL_CLK>,
+                 <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>;
+        clock-names = "phy", "cal", "cal_sleep";
+        #phy-cells = <0>;
+        pinctrl-names = "init", "default";
+        pinctrl-0 = <&hsic_sleep>;
+        pinctrl-1 = <&hsic_default>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
new file mode 100644
index 0000000000..0f200e3f97
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Synopsys Femto High-Speed USB PHY V2
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description: |
+  Qualcomm High-Speed USB PHY
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sc8180x-usb-hs-phy
+          - qcom,usb-snps-femto-v2-phy
+      - items:
+          - enum:
+              - qcom,sa8775p-usb-hs-phy
+              - qcom,sc8280xp-usb-hs-phy
+          - const: qcom,usb-snps-hs-5nm-phy
+      - items:
+          - enum:
+              - qcom,sc7280-usb-hs-phy
+              - qcom,sdx55-usb-hs-phy
+              - qcom,sdx65-usb-hs-phy
+              - qcom,sm6375-usb-hs-phy
+              - qcom,sm8150-usb-hs-phy
+              - qcom,sm8250-usb-hs-phy
+              - qcom,sm8350-usb-hs-phy
+              - qcom,sm8450-usb-hs-phy
+          - const: qcom,usb-snps-hs-7nm-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmhcc ref clock
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    items:
+      - description: PHY core reset
+
+  vdda-pll-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda18-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda33-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+  qcom,hs-disconnect-bp:
+    description:
+      This adjusts the voltage level for the threshold used to
+      detect a disconnect event at the host.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -272
+    maximum: 2156
+
+  qcom,squelch-detector-bp:
+    description:
+      This adjusts the voltage level for the threshold used to
+      detect valid high-speed data.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -2090
+    maximum: 1590
+
+  qcom,hs-amplitude-bp:
+    description:
+      This adjusts the high-speed DC level voltage.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -660
+    maximum: 2670
+
+  qcom,pre-emphasis-duration-bp:
+    description:
+      This signal controls the duration for which the
+      HS pre-emphasis current is sourced onto DP<#> or DM<#>.
+      The HS Transmitter pre-emphasis duration is defined in terms of
+      unit amounts. One unit of pre-emphasis duration is approximately
+      650 ps and is defined as 1X pre-emphasis duration.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: 10000
+    maximum: 20000
+
+  qcom,pre-emphasis-amplitude-bp:
+    description:
+      This signal controls the amount of current sourced to
+      DP<#> and DM<#> after a J-to-K or K-to-J transition.
+      The HS Transmitter pre-emphasis current is defined in terms of unit
+      amounts. One unit amount is approximately 2 mA and is defined as
+      1X pre-emphasis current.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: 10000
+    maximum: 40000
+
+  qcom,hs-rise-fall-time-bp:
+    description:
+      This adjusts the rise/fall times of the high-speed waveform.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -4100
+    maximum: 5430
+
+  qcom,hs-crossover-voltage-microvolt:
+    description:
+      This adjusts the voltage at which the DP<#> and DM<#>
+      signals cross while transmitting in HS mode.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -31000
+    maximum: 28000
+
+  qcom,hs-output-impedance-micro-ohms:
+    description:
+      In some applications, there can be significant series resistance
+      on the D+ and D- paths between the transceiver and cable. This adjusts
+      the driver source impedance to compensate for added series
+      resistance on the USB. The hardware accepts only discrete values. The
+      value closest to the provided input will be chosen as the override value
+      for this param.
+    minimum: -2300000
+    maximum: 6100000
+
+  qcom,ls-fs-output-impedance-bp:
+    description:
+      This adjusts the low- and full-speed single-ended source
+      impedance while driving high. The following adjustment values are based
+      on nominal process, voltage, and temperature.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -1053
+    maximum: 1310
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - vdda-pll-supply
+  - vdda18-supply
+  - vdda33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    phy@88e2000 {
+        compatible = "qcom,sm8150-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+        reg = <0x088e2000 0x400>;
+        #phy-cells = <0>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ref";
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+        vdda-pll-supply = <&vdd_usb_hs_core>;
+        vdda33-supply = <&vdda_usb_hs_3p1>;
+        vdda18-supply = <&vdda_usb_hs_1p8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
new file mode 100644
index 0000000000..6e4254ff1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ss-28nm-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmcc clock
+      - description: PHY AHB clock
+      - description: SuperSpeed pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ahb
+      - const: pipe
+
+  vdd-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda1p8-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  resets:
+    items:
+      - description: COM reset
+      - description: PHY reset line
+
+  reset-names:
+    items:
+      - const: com
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - vdd-supply
+  - vdda1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    usb3_phy: usb3-phy@78000 {
+        compatible = "qcom,usb-ss-28nm-phy";
+        reg = <0x78000 0x400>;
+        #phy-cells = <0>;
+        clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+                 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+        clock-names = "ref", "ahb", "pipe";
+        resets = <&gcc GCC_USB3_PHY_BCR>,
+                 <&gcc GCC_USB3PHY_PHY_BCR>;
+        reset-names = "com", "phy";
+        vdd-supply = <&vreg_l3_1p05>;
+        vdda1p8-supply = <&vreg_l5_1p8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt
new file mode 100644
index 0000000000..952f6c96ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt
@@ -0,0 +1,24 @@
+Qualcomm APQ8064 SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,apq8064-sata-phy".
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+- clock-names: must be "cfg" for phy config clock.
+
+Example:
+	sata_phy: sata-phy@1b400000 {
+		compatible = "qcom,apq8064-sata-phy";
+		reg = <0x1b400000 0x200>;
+
+		clocks = <&gcc SATA_PHY_CFG_CLK>;
+		clock-names = "cfg";
+
+		#phy-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt
new file mode 100644
index 0000000000..76bfbd0562
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt
@@ -0,0 +1,23 @@
+Qualcomm IPQ806x SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: must be exactly one entry
+- clock-names: must be "cfg"
+
+Example:
+	sata_phy: sata-phy@1b400000 {
+		compatible = "qcom,ipq806x-sata-phy";
+		reg = <0x1b400000 0x200>;
+
+		clocks = <&gcc SATA_PHY_CFG_CLK>;
+		clock-names = "cfg";
+
+		#phy-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
new file mode 100644
index 0000000000..09c614952f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom IPQ40xx Dakota HS/SS USB PHY
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ss-ipq4019-phy
+      - qcom,usb-hs-ipq4019-phy
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: por_rst
+      - const: srif_rst
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+    hsphy@a8000 {
+      #phy-cells = <0>;
+      compatible = "qcom,usb-hs-ipq4019-phy";
+      reg = <0xa8000 0x40>;
+      resets = <&gcc USB2_HSPHY_POR_ARES>,
+               <&gcc USB2_HSPHY_S_ARES>;
+      reset-names = "por_rst", "srif_rst";
+    };
diff --git a/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
new file mode 100644
index 0000000000..9d2868a437
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ralink-usb-phy.txt
@@ -0,0 +1,23 @@
+Mediatek/Ralink USB PHY
+
+Required properties:
+ - compatible: "ralink,rt3352-usbphy"
+	       "mediatek,mt7620-usbphy"
+	       "mediatek,mt7628-usbphy"
+ - reg: required for "mediatek,mt7628-usbphy", unused otherwise
+ - #phy-cells: should be 0
+ - ralink,sysctl: a phandle to a ralink syscon register region
+ - resets: the two reset controllers for host and device
+ - reset-names: the names of the 2 reset controllers
+
+Example:
+
+usbphy: phy {
+	compatible = "mediatek,mt7628-usbphy";
+	reg = <0x10120000 0x1000>;
+	#phy-cells = <0>;
+
+	ralink,sysctl = <&sysc>;
+	resets = <&rstctrl 22 &rstctrl 25>;
+	reset-names = "host", "device";
+};
diff --git a/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
new file mode 100644
index 0000000000..9911ada39e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/realtek,usb2phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC SoCs USB 2.0 PHY
+
+maintainers:
+  - Stanley Chang <stanley_chang@realtek.com>
+
+description: |
+  Realtek USB 2.0 PHY support the digital home center (DHC) RTD series SoCs.
+  The USB 2.0 PHY driver is designed to support the XHCI controller. The SoCs
+  support multiple XHCI controllers. One PHY device node maps to one XHCI
+  controller.
+
+  RTD1295/RTD1619 SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some
+  controllers.
+  XHCI controller#0 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+
+  RTD1395 SoCs USB
+  The USB architecture includes two XHCI controllers.
+  The controller#0 has one USB 2.0 PHY. The controller#1 includes two USB 2.0
+  PHY.
+  XHCI controller#0 -- usb2phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+                               |- phy#1
+
+  RTD1319/RTD1619b SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2.
+  XHCI controller#0 -- usb2phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+
+  RTD1319d SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0.
+  XHCI controller#0 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+
+  RTD1312c/RTD1315e SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each XHCI maps to one USB 2.0 PHY.
+  XHCI controller#0 -- usb2phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-usb2phy
+      - realtek,rtd1312c-usb2phy
+      - realtek,rtd1315e-usb2phy
+      - realtek,rtd1319-usb2phy
+      - realtek,rtd1319d-usb2phy
+      - realtek,rtd1395-usb2phy
+      - realtek,rtd1395-usb2phy-2port
+      - realtek,rtd1619-usb2phy
+      - realtek,rtd1619b-usb2phy
+
+  reg:
+    items:
+      - description: PHY data registers
+      - description: PHY control registers
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 2
+    description:
+      Phandles to nvmem cell that contains the trimming data.
+      If unspecified, default value is used.
+
+  nvmem-cell-names:
+    items:
+      - const: usb-dc-cal
+      - const: usb-dc-dis
+    description:
+      The following names, which correspond to each nvmem-cells.
+      usb-dc-cal is the driving level for each phy specified via efuse.
+      usb-dc-dis is the disconnection level for each phy specified via efuse.
+
+  realtek,inverse-hstx-sync-clock:
+    description:
+      For one of the phys of RTD1619b SoC, the synchronous clock of the
+      high-speed tx must be inverted.
+    type: boolean
+
+  realtek,driving-level:
+    description:
+      Control the magnitude of High speed Dp/Dm output swing (mV).
+      For a different board or port, the original magnitude maybe not meet
+      the specification. In this situation we can adjust the value to meet
+      the specification.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    minimum: 0
+    maximum: 31
+
+  realtek,driving-level-compensate:
+    description:
+      For RTD1315e SoC, the driving level can be adjusted by reading the
+      efuse table. This property provides drive compensation.
+      If the magnitude of High speed Dp/Dm output swing still not meet the
+      specification, then we can set this value to meet the specification.
+    $ref: /schemas/types.yaml#/definitions/int32
+    default: 0
+    minimum: -8
+    maximum: 8
+
+  realtek,disconnection-compensate:
+    description:
+      This adjusts the disconnection level compensation for the different
+      boards with different disconnection level.
+    $ref: /schemas/types.yaml#/definitions/int32
+    default: 0
+    minimum: -8
+    maximum: 8
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - realtek,rtd1619b-usb2phy
+    then:
+      properties:
+        realtek,inverse-hstx-sync-clock: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - realtek,rtd1315e-usb2phy
+    then:
+      properties:
+        realtek,driving-level-compensate: false
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@13214 {
+        compatible = "realtek,rtd1619b-usb2phy";
+        reg = <0x13214 0x4>, <0x28280 0x4>;
+        #phy-cells = <0>;
+        nvmem-cells = <&otp_usb_port0_dc_cal>, <&otp_usb_port0_dc_dis>;
+        nvmem-cell-names = "usb-dc-cal", "usb-dc-dis";
+
+        realtek,inverse-hstx-sync-clock;
+        realtek,driving-level = <0xa>;
+        realtek,disconnection-compensate = <(-1)>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml b/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml
new file mode 100644
index 0000000000..dfe2bb4e59
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/realtek,usb3phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC SoCs USB 3.0 PHY
+
+maintainers:
+  - Stanley Chang <stanley_chang@realtek.com>
+
+description: |
+  Realtek USB 3.0 PHY support the digital home center (DHC) RTD series SoCs.
+  The USB 3.0 PHY driver is designed to support the XHCI controller. The SoCs
+  support multiple XHCI controllers. One PHY device node maps to one XHCI
+  controller.
+
+  RTD1295/RTD1619 SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on some
+  controllers.
+  XHCI controller#0 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+
+  RTD1319/RTD1619b SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each XHCI maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#2.
+  XHCI controller#0 -- usb2phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+
+  RTD1319d SoCs USB
+  The USB architecture includes three XHCI controllers.
+  Each xhci maps to one USB 2.0 PHY and map one USB 3.0 PHY on controllers#0.
+  XHCI controller#0 -- usb2phy -- phy#0
+                    |- usb3phy -- phy#0
+  XHCI controller#1 -- usb2phy -- phy#0
+  XHCI controller#2 -- usb2phy -- phy#0
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-usb3phy
+      - realtek,rtd1319-usb3phy
+      - realtek,rtd1319d-usb3phy
+      - realtek,rtd1619-usb3phy
+      - realtek,rtd1619b-usb3phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 1
+    description: A phandle to the tx lfps swing trim data provided by
+      a nvmem device, if unspecified, default values shall be used.
+
+  nvmem-cell-names:
+    items:
+      - const: usb_u3_tx_lfps_swing_trim
+
+  realtek,amplitude-control-coarse-tuning:
+    description:
+      This adjusts the signal amplitude for normal operation and beacon LFPS.
+      This value is a parameter for coarse tuning.
+      For different boards, if the default value is inappropriate, this
+      property can be assigned to adjust.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 255
+    minimum: 0
+    maximum: 255
+
+  realtek,amplitude-control-fine-tuning:
+    description:
+      This adjusts the signal amplitude for normal operation and beacon LFPS.
+      This value is used for fine-tuning parameters.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 65535
+    minimum: 0
+    maximum: 65535
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@13e10 {
+        compatible = "realtek,rtd1319d-usb3phy";
+        reg = <0x13e10 0x4>;
+        #phy-cells = <0>;
+
+        nvmem-cells = <&otp_usb_u3_tx_lfps_swing_trim>;
+        nvmem-cell-names = "usb_u3_tx_lfps_swing_trim";
+
+        realtek,amplitude-control-coarse-tuning = <0x77>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,r8a779f0-ether-serdes.yaml b/Documentation/devicetree/bindings/phy/renesas,r8a779f0-ether-serdes.yaml
new file mode 100644
index 0000000000..93ab728742
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,r8a779f0-ether-serdes.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,r8a779f0-ether-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet SERDES
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ether-serdes
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#phy-cells':
+    description: Port number of SERDES.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    phy@e6444000 {
+        compatible = "renesas,r8a779f0-ether-serdes";
+        reg = <0xe6444000 0xc00>;
+        clocks = <&cpg CPG_MOD 1506>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 1506>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml
new file mode 100644
index 0000000000..afc09f39b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,rcar-gen2-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen2 USB PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,usb-phy-r8a7742      # RZ/G1H
+          - renesas,usb-phy-r8a7743      # RZ/G1M
+          - renesas,usb-phy-r8a7744      # RZ/G1N
+          - renesas,usb-phy-r8a7745      # RZ/G1E
+          - renesas,usb-phy-r8a77470     # RZ/G1C
+          - renesas,usb-phy-r8a7790      # R-Car H2
+          - renesas,usb-phy-r8a7791      # R-Car M2-W
+          - renesas,usb-phy-r8a7794      # R-Car E2
+      - const: renesas,rcar-gen2-usb-phy # R-Car Gen2 or RZ/G1
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhs
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^usb-phy@[02]$":
+    type: object
+    description: Subnode corresponding to a USB channel.
+
+    properties:
+      reg:
+        description: FIXME RZ/G1C supports channel 0 only
+        enum: [0, 2]
+
+      '#phy-cells':
+        description: |
+          The phandle's argument in the PHY specifier is the USB controller
+          selector for the USB channel.
+          For RZ/G1C:
+            - 0 for EHCI/OHCI
+            - 1 for HS-USB
+          For all other SoCS:
+            - 0 for PCI EHCI/OHCI
+            - 1 for HS-USB (channel 0) or xHCI (channel 2)
+        const: 1
+
+    required:
+      - reg
+      - '#phy-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - usb-phy@0
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,usb-phy-r8a77470
+then:
+  properties:
+    usb-phy@2: false
+else:
+  required:
+    - usb-phy@2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    usb-phy-controller@e6590100 {
+        compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
+        reg = <0xe6590100 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cpg CPG_MOD 704>;
+        clock-names = "usbhs";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 704>;
+
+        usb0: usb-phy@0 {
+            reg = <0>;
+            #phy-cells = <1>;
+        };
+        usb2: usb-phy@2 {
+            reg = <2>;
+            #phy-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml
new file mode 100644
index 0000000000..247ef7c47c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen3-pcie-phy.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,rcar-gen3-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Generation 3 PCIe PHY
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    const: renesas,r8a77980-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a77980-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77980-sysc.h>
+
+    pcie-phy@e65d0000 {
+            compatible = "renesas,r8a77980-pcie-phy";
+            reg = <0xe65d0000 0x8000>;
+            #phy-cells = <0>;
+            clocks = <&cpg CPG_MOD 319>;
+            power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+            resets = <&cpg 319>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
new file mode 100644
index 0000000000..f82649a55e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 2.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r7s9210  # RZ/A2
+              - renesas,usb2-phy-r8a774a1 # RZ/G2M
+              - renesas,usb2-phy-r8a774b1 # RZ/G2N
+              - renesas,usb2-phy-r8a774c0 # RZ/G2E
+              - renesas,usb2-phy-r8a774e1 # RZ/G2H
+              - renesas,usb2-phy-r8a7795  # R-Car H3
+              - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
+              - renesas,usb2-phy-r8a77965 # R-Car M3-N
+              - renesas,usb2-phy-r8a77990 # R-Car E3
+              - renesas,usb2-phy-r8a77995 # R-Car D3
+          - const: renesas,rcar-gen3-usb2-phy
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r9a07g043 # RZ/G2UL
+              - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
+              - renesas,usb2-phy-r9a07g054 # RZ/V2L
+          - const: renesas,rzg2l-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: usb_x1
+
+  '#phy-cells':
+    enum: [0, 1]  # and 0 is deprecated.
+    description: |
+      The phandle's argument in the PHY specifier is the INT_STATUS bit of
+      controller.
+      - 1 = USBH_INTA (OHCI)
+      - 2 = USBH_INTB (EHCI)
+      - 3 = UCOM_INT (OTG and BC)
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: reset of USB 2.0 host side
+      - description: reset of USB 2.0 peripheral side
+
+  vbus-supply:
+    description: |
+      Phandle to a regulator that provides power to the VBUS. This regulator
+      will be managed during the PHY power on/off sequence.
+
+  renesas,no-otg-pins:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      specify when a board does not provide proper otg pins.
+
+  dr_mode: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,usb2-phy-r7s9210
+then:
+  required:
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#phy-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzg2l-usb2-phy
+    then:
+      required:
+        - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@ee080200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee080200 0x700>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 703>;
+        #phy-cells = <1>;
+    };
+
+    usb-phy@ee0a0200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee0a0200 0x700>;
+        clocks = <&cpg CPG_MOD 702>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 0000000000..fe57c5373d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-usb3-phy # RZ/G2M
+          - renesas,r8a774b1-usb3-phy # RZ/G2N
+          - renesas,r8a774e1-usb3-phy # RZ/G2H
+          - renesas,r8a7795-usb3-phy  # R-Car H3
+          - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77961-usb3-phy # R-Car M3-W+
+          - renesas,r8a77965-usb3-phy # R-Car M3-N
+      - const: renesas,rcar-gen3-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    # If you want to use the ssc, the clock-frequency of usb_extal
+    # must not be 0.
+    minItems: 2
+    items:
+      - const: usb3-if # The functional clock
+      - const: usb3s_clk # The usb3's external clock
+      - const: usb_extal # The usb2's external clock
+
+  '#phy-cells':
+    # see phy-bindings.txt in the same directory
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,ssc-range:
+    description: |
+      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
+      exist means disabling the ssc. The actual value will be -<value> ppm.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 4003, 4492, 4980 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@e65ee000 {
+        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+        reg = <0xe65ee000 0x90>;
+        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
new file mode 100644
index 0000000000..5254413137
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy with inno IP block
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-usb2phy
+      - rockchip,rk3128-usb2phy
+      - rockchip,rk3228-usb2phy
+      - rockchip,rk3308-usb2phy
+      - rockchip,rk3328-usb2phy
+      - rockchip,rk3366-usb2phy
+      - rockchip,rk3399-usb2phy
+      - rockchip,rk3568-usb2phy
+      - rockchip,rk3588-usb2phy
+      - rockchip,rv1108-usb2phy
+
+  reg:
+    maxItems: 1
+
+  clock-output-names:
+    description:
+      The usb 480m output clock name.
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phyclk
+
+  assigned-clocks:
+    description:
+      Phandle of the usb 480m clock.
+
+  assigned-clock-parents:
+    description:
+      Parent of the usb 480m clock.
+      Select between usb-phy output 480m and xin24m.
+      Refer to clk/clock-bindings.txt for generic clock consumer properties.
+
+  extcon:
+    description:
+      Phandle to the extcon device providing the cable state for the otg phy.
+
+  interrupts:
+    description: Muxed interrupt for both ports
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+
+  rockchip,usbgrf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb general register files'.
+      When set the driver will request its phandle as one companion-grf
+      for some special SoCs (e.g rv1108).
+
+  host-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#phy-cells":
+        const: 0
+
+      interrupts:
+        description: host linestate interrupt
+        maxItems: 1
+
+      interrupt-names:
+        const: linestate
+
+      phy-supply:
+        description:
+          Phandle to a regulator that provides power to VBUS.
+          See ./phy-bindings.txt for details.
+
+    required:
+      - "#phy-cells"
+
+  otg-port:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#phy-cells":
+        const: 0
+
+      interrupts:
+        minItems: 1
+        maxItems: 3
+
+      interrupt-names:
+        oneOf:
+          - const: linestate
+          - const: otg-mux
+          - items:
+              - const: otg-bvalid
+              - const: otg-id
+              - const: linestate
+
+      phy-supply:
+        description:
+          Phandle to a regulator that provides power to VBUS.
+          See ./phy-bindings.txt for details.
+
+    required:
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - clock-output-names
+  - "#clock-cells"
+
+anyOf:
+  - required:
+      - otg-port
+  - required:
+      - host-port
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3568-usb2phy
+              - rockchip,rk3588-usb2phy
+
+    then:
+      properties:
+        host-port:
+          properties:
+            interrupts: false
+
+        otg-port:
+          properties:
+            interrupts: false
+
+      required:
+        - interrupts
+
+    else:
+      properties:
+        interrupts: false
+
+        host-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+        otg-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    u2phy0: usb2phy@e450 {
+      compatible = "rockchip,rk3399-usb2phy";
+      reg = <0xe450 0x10>;
+      clocks = <&cru SCLK_USB2PHY0_REF>;
+      clock-names = "phyclk";
+      clock-output-names = "clk_usbphy0_480m";
+      #clock-cells = <0>;
+
+      u2phy0_host: host-port {
+        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "linestate";
+        #phy-cells = <0>;
+      };
+
+      u2phy0_otg: otg-port {
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "otg-bvalid", "otg-id", "linestate";
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 0000000000..c4fbffcde6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+      - rockchip,rk3588-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - rockchip,rk3588-pcie3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: pclk
+    else:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          items:
+            - const: refclk_m
+            - const: refclk_n
+            - const: pclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
new file mode 100644
index 0000000000..46e64fa293
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,px30-dsi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip MIPI DPHY with additional LVDS/TTL modes
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - rockchip,px30-dsi-dphy
+      - rockchip,rk3128-dsi-dphy
+      - rockchip,rk3368-dsi-dphy
+      - rockchip,rk3568-dsi-dphy
+      - rockchip,rv1126-dsi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+
+  reset-names:
+    items:
+      - const: apb
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi_dphy: phy@ff2e0000 {
+        compatible = "rockchip,px30-dsi-dphy";
+        reg = <0xff2e0000 0x10000>;
+        clocks = <&pmucru 13>, <&cru 12>;
+        clock-names = "ref", "pclk";
+        resets = <&cru 12>;
+        reset-names = "apb";
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/rockchip,rk3288-dp-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,rk3288-dp-phy.yaml
new file mode 100644
index 0000000000..2538235c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,rk3288-dp-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3288-dp-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3288-dp-phy
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: 24m
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    edp-phy {
+      compatible = "rockchip,rk3288-dp-phy";
+      clocks = <&cru SCLK_EDP_24M>;
+      clock-names = "24m";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
new file mode 100644
index 0000000000..57d28c0d56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -0,0 +1,43 @@
+Rockchip EMMC PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-emmc-phy
+ - #phy-cells: must be 0
+ - reg: PHY register address offset and length in "general
+   register files"
+
+Optional properties:
+ - clock-names: Should contain "emmcclk".  Although this is listed as optional
+		(because most boards can get basic functionality without having
+		access to it), it is strongly suggested.
+		See ../clock/clock-bindings.txt for details.
+ - clocks: Should have a phandle to the card clock exported by the SDHCI driver.
+ - drive-impedance-ohm: Specifies the drive impedance in Ohm.
+                        Possible values are 33, 40, 50, 66 and 100.
+                        If not set, the default value of 50 will be applied.
+ - rockchip,enable-strobe-pulldown: Enable internal pull-down for the strobe
+                                    line.  If not set, pull-down is not used.
+ - rockchip,output-tapdelay-select: Specifies the phyctrl_otapdlysec register.
+                                    If not set, the register defaults to 0x4.
+                                    Maximum value 0xf.
+
+Example:
+
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	emmcphy: phy@f780 {
+		compatible = "rockchip,rk3399-emmc-phy";
+		reg = <0xf780 0x20>;
+		clocks = <&sdhci>;
+		clock-names = "emmcclk";
+		drive-impedance-ohm = <50>;
+		#phy-cells = <0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
new file mode 100644
index 0000000000..5ac994b3c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC MIPI RX0 D-PHY
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip SoC has a MIPI CSI D-PHY based on an Innosilicon IP which
+  connects to the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-csi-dphy
+      - rockchip,rk1808-csi-dphy
+      - rockchip,rk3326-csi-dphy
+      - rockchip,rk3368-csi-dphy
+      - rockchip,rk3568-csi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    description: Video in/out power domain.
+    maxItems: 1
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+
+  reset-names:
+    items:
+      - const: apb
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are access through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - power-domains
+  - resets
+  - reset-names
+  - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+
+    csi_dphy: phy@ff2f0000 {
+        compatible = "rockchip,px30-csi-dphy";
+        reg = <0xff2f0000 0x4000>;
+        clocks = <&cru 1>;
+        clock-names = "pclk";
+        #phy-cells = <0>;
+        power-domains = <&power 1>;
+        resets = <&cru 1>;
+        reset-names = "apb";
+        rockchip,grf = <&grf>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
new file mode 100644
index 0000000000..5114e99b00
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy-rx0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC MIPI RX0 D-PHY
+
+maintainers:
+  - Helen Koike <helen.koike@collabora.com>
+  - Ezequiel Garcia <ezequiel@collabora.com>
+
+description: |
+  The Rockchip SoC has a MIPI D-PHY bus with an RX0 entry which connects to
+  the ISP1 (Image Signal Processing unit v1.0) for CSI cameras.
+
+properties:
+  compatible:
+    const: rockchip,rk3399-mipi-dphy-rx0
+
+  clocks:
+    items:
+      - description: MIPI D-PHY ref clock
+      - description: MIPI D-PHY RX0 cfg clock
+      - description: Video in/out general register file clock
+
+  clock-names:
+    items:
+      - const: dphy-ref
+      - const: dphy-cfg
+      - const: grf
+
+  '#phy-cells':
+    const: 0
+
+  power-domains:
+    description: Video in/out power domain.
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#phy-cells'
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /*
+     * MIPI D-PHY RX0 use registers in "general register files", it
+     * should be a child of the GRF.
+     *
+     * grf: syscon@ff770000 {
+     *  compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+     *  ...
+     * };
+     */
+
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
new file mode 100644
index 0000000000..b496042f1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
@@ -0,0 +1,36 @@
+Rockchip PCIE PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-pcie-phy
+ - clocks: Must contain an entry in clock-names.
+	See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "refclk"
+ - resets: Must contain an entry in reset-names.
+	See ../reset/reset.txt for details.
+ - reset-names: Must be "phy"
+
+Required properties for legacy PHY mode (deprecated):
+ - #phy-cells: must be 0
+
+Required properties for per-lane PHY mode (preferred):
+ - #phy-cells: must be 1
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	...
+
+	pcie_phy: pcie-phy {
+		compatible = "rockchip,rk3399-pcie-phy";
+		#phy-cells = <0>;
+		clocks = <&cru SCLK_PCIEPHY_REF>;
+		clock-names = "refclk";
+		resets = <&cru SRST_PCIEPHY>;
+		reset-names = "phy";
+	};
+};
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
new file mode 100644
index 0000000000..499d55131a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB2.0 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-usb-phy
+      - rockchip,rk3188-usb-phy
+      - rockchip,rk3288-usb-phy
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "usb-phy@[0-9a-f]+$":
+    type: object
+
+    properties:
+      reg:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: phyclk
+
+      "#clock-cells":
+        const: 0
+
+      resets:
+        maxItems: 1
+
+      reset-names:
+        const: phy-reset
+
+      vbus-supply:
+        description: phandle for vbus power source
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+examples:
+  - |
+    usbphy: usbphy {
+      compatible = "rockchip,rk3288-usb-phy";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usbphy0: usb-phy@320 {
+        reg = <0x320>;
+        #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
new file mode 100644
index 0000000000..3bee3f8733
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,dp-video-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC DisplayPort PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dp-video-phy
+      - samsung,exynos5420-dp-video-phy
+
+  "#phy-cells":
+    const: 0
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description:
+      Phandle to PMU system controller interface (if not a child of PMU).
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy {
+        compatible = "samsung,exynos5420-dp-video-phy";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml
new file mode 100644
index 0000000000..efc679c385
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI PHY
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-hdmiphy
+          - samsung,exynos4212-hdmiphy
+      - const: samsung,exynos5-hdmiphy
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-phy@38 {
+            compatible = "samsung,exynos4210-hdmiphy";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
new file mode 100644
index 0000000000..41df8bb08f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe PHY
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Jaehoon Chung <jh80.chung@samsung.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: samsung,exynos5433-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle for PMU system controller interface, used to
+                 control PMU registers bits for PCIe PHY
+
+  samsung,fsys-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle for FSYS sysreg interface, used to control
+                 sysreg registers bits for PCIe PHY
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - samsung,pmu-syscon
+  - samsung,fsys-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie-phy@15680000 {
+        compatible = "samsung,exynos5433-pcie-phy";
+        reg = <0x15680000 0x1000>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        samsung,fsys-sysreg = <&syscon_fsys>;
+        #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml
new file mode 100644
index 0000000000..8751e55948
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos5250-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5250 SoC SATA PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5250-sata-phy
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sata_phyctrl
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  samsung,exynos-sataphy-i2c-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to I2C SATA interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,syscon-phandle
+  - samsung,exynos-sataphy-i2c-phandle
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    phy@12170000 {
+        compatible = "samsung,exynos5250-sata-phy";
+        reg = <0x12170000 0x1ff>;
+        clocks = <&clock CLK_SATA_PHYCTRL>;
+        clock-names = "sata_phyctrl";
+        #phy-cells = <0>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
new file mode 100644
index 0000000000..b2250e4a6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,mipi-video-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC MIPI CSIS/DSIM DPHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  For samsung,s5pv210-mipi-video-phy compatible PHYs the second cell in the
+  PHY specifier identifies the PHY and its meaning is as follows::
+    0 - MIPI CSIS 0,
+    1 - MIPI DSIM 0,
+    2 - MIPI CSIS 1,
+    3 - MIPI DSIM 1.
+
+  samsung,exynos5420-mipi-video-phy and samsung,exynos5433-mipi-video-phy
+  support additional fifth PHY::
+    4 - MIPI CSIS 2.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-mipi-video-phy
+      - samsung,exynos5420-mipi-video-phy
+      - samsung,exynos5433-mipi-video-phy
+
+  "#phy-cells":
+    const: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description:
+      Phandle to PMU system controller interface, valid only for
+      samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy (if
+      not a child of PMU).
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description:
+      Phandle to PMU system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy (if not a child of PMU).
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,cam0-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to CAM0 system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,cam1-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to CAM1 system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+required:
+  - compatible
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-mipi-video-phy
+              - samsung,exynos5420-mipi-video-phy
+    then:
+      properties:
+        samsung,pmu-syscon: false
+        samsung,disp-sysreg: false
+        samsung,cam0-sysreg: false
+        samsung,cam1-sysreg: false
+    else:
+      properties:
+        syscon: false
+      required:
+        - samsung,disp-sysreg
+        - samsung,cam0-sysreg
+        - samsung,cam1-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    phy {
+        compatible = "samsung,exynos5433-mipi-video-phy";
+        #phy-cells = <1>;
+        samsung,cam0-sysreg = <&syscon_cam0>;
+        samsung,cam1-sysreg = <&syscon_cam1>;
+        samsung,disp-sysreg = <&syscon_disp>;
+    };
+
+  - |
+    phy {
+        compatible = "samsung,s5pv210-mipi-video-phy";
+        syscon = <&pmu_system_controller>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
new file mode 100644
index 0000000000..782f975b43
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS PHY
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - samsung,exynos7-ufs-phy
+      - samsung,exynosautov9-ufs-phy
+      - tesla,fsd-ufs-phy
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: phy-pma
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    items:
+      minItems: 1
+      items:
+        - description: phandle for PMU system controller interface, used to
+                       control pmu registers bits for ufs m-phy
+        - description: offset of the pmu control register
+    description:
+      It can be phandle/offset pair. The second cell which can represent an
+      offset is optional.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - samsung,pmu-syscon
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-ufs-phy
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PLL reference clock
+            - description: symbol clock for input symbol (rx0-ch0 symbol clock)
+            - description: symbol clock for input symbol (rx1-ch1 symbol clock)
+            - description: symbol clock for output symbol (tx0 symbol clock)
+
+        clock-names:
+          items:
+            - const: ref_clk
+            - const: rx1_symbol_clk
+            - const: rx0_symbol_clk
+            - const: tx0_symbol_clk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: PLL reference clock
+
+        clock-names:
+          items:
+            - const: ref_clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    ufs_phy: ufs-phy@15571800 {
+        compatible = "samsung,exynos7-ufs-phy";
+        reg = <0x15571800 0x240>;
+        reg-names = "phy-pma";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        #phy-cells = <0>;
+        clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+                 <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+                 <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+                 <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+        clock-names = "ref_clk", "rx1_symbol_clk",
+                      "rx0_symbol_clk", "tx0_symbol_clk";
+
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml
new file mode 100644
index 0000000000..d9f22a801c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC USB 2.0 PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  The first phandle argument in the PHY specifier identifies the PHY, its
+  meaning is compatible dependent. For the currently supported SoCs (Exynos4210
+  and Exynos4212) it is as follows::
+    0 - USB device ("device"),
+    1 - USB host ("host"),
+    2 - HSIC0 ("hsic0"),
+    3 - HSIC1 ("hsic1"),
+  Exynos3250 has only USB device phy available as phy 0.
+
+  Exynos4210 and Exynos4212 use mode switching and require that mode switch
+  register is supplied.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-usb2-phy
+      - samsung,exynos4210-usb2-phy
+      - samsung,exynos4x12-usb2-phy
+      - samsung,exynos5250-usb2-phy
+      - samsung,exynos5420-usb2-phy
+      - samsung,s5pv210-usb2-phy
+
+  clocks:
+    items:
+      - description: PHY module gate clock.
+      - description: Reference rate clock of PHY module.
+
+  clock-names:
+    items:
+      - const: phy
+      - const: ref
+
+  "#phy-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,pmureg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to system registers interface.
+
+  vbus-supply:
+    description:
+      VBUS power source.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,pmureg-phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4x12-usb2-phy
+              - samsung,exynos5250-usb2-phy
+              - samsung,exynos5420-usb2-phy
+    then:
+      required:
+        - samsung,sysreg-phandle
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+
+    phy@12130000 {
+        compatible = "samsung,exynos5420-usb2-phy";
+        reg = <0x12130000 0x100>;
+        #phy-cells = <1>;
+        clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+        clock-names = "phy", "ref";
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,pmureg-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
new file mode 100644
index 0000000000..452e584d98
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  For samsung,exynos5250-usbdrd-phy and samsung,exynos5420-usbdrd-phy
+  compatible PHYs, the second cell in the PHY specifier identifies the
+  PHY id, which is interpreted as follows::
+    0 - UTMI+ type phy,
+    1 - PIPE3 type phy.
+
+  For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
+  'usbdrd_phy' nodes should have numbered alias in the aliases node, in the
+  form of usbdrdphyN, N = 0, 1... (depending on number of controllers).
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-usbdrd-phy
+      - samsung,exynos5420-usbdrd-phy
+      - samsung,exynos5433-usbdrd-phy
+      - samsung,exynos7-usbdrd-phy
+      - samsung,exynos850-usbdrd-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    description: |
+      At least two clocks::
+        - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used
+          for register access.
+        - PHY reference clock (usually crystal clock), used for PHY operations,
+          associated by phy name. It is used to determine bit values for clock
+          settings register.  For Exynos5420 this is given as 'sclk_usbphy30'
+          in the CMU.
+
+  "#phy-cells":
+    const: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified.
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  vbus-supply:
+    description:
+      VBUS power source.
+
+  vbus-boost-supply:
+    description:
+      VBUS Boost 5V power source.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,pmu-syscon
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-usbdrd-phy
+              - samsung,exynos7-usbdrd-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+            - const: phy_utmi
+            - const: phy_pipe
+            - const: itp
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+
+    phy@12100000 {
+        compatible = "samsung,exynos5420-usbdrd-phy";
+        reg = <0x12100000 0x100>;
+        #phy-cells = <1>;
+        clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+        clock-names = "phy", "ref";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        vbus-supply = <&usb300_vbus_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
new file mode 100644
index 0000000000..de3cffc850
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier AHCI PHY
+
+description: |
+  This describes the deivcetree bindings for PHY interfaces built into
+  AHCI controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-ahci-phy
+      - socionext,uniphier-pxs2-ahci-phy
+      - socionext,uniphier-pxs3-ahci-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 2
+    maxItems: 6
+
+  reset-names: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ahci-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: gio
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: link
+            - const: gio
+            - const: phy
+            - const: pm
+            - const: tx
+            - const: rx
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pxs2-ahci-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pxs3-ahci-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahci_phy: phy@10 {
+        compatible = "socionext,uniphier-pxs3-ahci-phy";
+        reg = <0x10 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 28>, <&sys_clk 30>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 28>, <&sys_rst 30>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
new file mode 100644
index 0000000000..b3ed2f74a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe PHY
+
+description: |
+  This describes the devicetree bindings for PHY interface built into
+  PCIe controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-pcie-phy
+      - socionext,uniphier-ld20-pcie-phy
+      - socionext,uniphier-pxs3-pcie-phy
+      - socionext,uniphier-nx1-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+  socionext,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to system control to set configurations for phy
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-pcie-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: phy@66038000 {
+        compatible = "socionext,uniphier-ld20-pcie-phy";
+        reg = <0x66038000 0x4000>;
+        #phy-cells = <0>;
+        clock-names = "link";
+        clocks = <&sys_clk 24>;
+        reset-names = "link";
+        resets = <&sys_rst 24>;
+        socionext,syscon = <&soc_glue>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
new file mode 100644
index 0000000000..19522c54f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB2 PHY
+
+description: |
+  This describes the devicetree bindings for PHY interface built into
+  USB2 controller implemented on Socionext UniPhier SoCs.
+  Pro4 SoC has both USB2 and USB3 host controllers, however, this USB3
+  controller doesn't include its own High-Speed PHY. This needs to specify
+  USB2 PHY instead of USB3 HS-PHY.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb2-phy
+      - socionext,uniphier-ld11-usb2-phy
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^phy@[0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+        description:
+          The ID number for the PHY
+
+      "#phy-cells":
+        const: 0
+
+      vbus-supply:
+        description: A phandle to the regulator for USB VBUS, only for USB host
+
+    required:
+      - reg
+      - "#phy-cells"
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
+
+    usb-hub {
+        compatible = "socionext,uniphier-ld11-usb2-phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb_phy0: phy@0 {
+            reg = <0>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy1: phy@1 {
+            reg = <1>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy2: phy@2 {
+            reg = <2>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
new file mode 100644
index 0000000000..2107d98ace
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB3 High-Speed (HS) PHY
+
+description: |
+  This describes the devicetree bindings for PHY interfaces built into
+  USB3 controller implemented on Socionext UniPhier SoCs.
+  Although the controller includes High-Speed PHY and Super-Speed PHY,
+  this describes about High-Speed PHY.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro5-usb3-hsphy
+      - socionext,uniphier-pxs2-usb3-hsphy
+      - socionext,uniphier-ld20-usb3-hsphy
+      - socionext,uniphier-pxs3-usb3-hsphy
+      - socionext,uniphier-nx1-usb3-hsphy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names: true
+
+  resets:
+    maxItems: 2
+
+  reset-names: true
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS
+
+  nvmem-cells:
+    maxItems: 3
+    description:
+      Phandles to nvmem cell that contains the trimming data.
+      Available only for HS-PHY implemented on LD20 and PXs3, and
+      if unspecified, default value is used.
+
+  nvmem-cell-names:
+    items:
+      - const: rterm
+      - const: sel_t
+      - const: hs_i
+    description:
+      Should be the following names, which correspond to each nvmem-cells.
+      All of the 3 parameters associated with the above names are
+      required for each port, if any one is omitted, the trimming data
+      of the port will not be set at all.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs2-usb3-hsphy
+              - socionext,uniphier-ld20-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs3-usb3-hsphy
+              - socionext,uniphier-nx1-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: link
+            - const: phy
+            - const: phy-ext
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb_hsphy0: phy@200 {
+        compatible = "socionext,uniphier-ld20-usb3-hsphy";
+        reg = <0x200 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
+        nvmem-cell-names = "rterm", "sel_t", "hs_i";
+        nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
new file mode 100644
index 0000000000..8f5aa6238b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier USB3 Super-Speed (SS) PHY
+
+description: |
+  This describes the devicetree bindings for PHY interfaces built into
+  USB3 controller implemented on Socionext UniPhier SoCs.
+  Although the controller includes High-Speed PHY and Super-Speed PHY,
+  this describes about Super-Speed PHY.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-ssphy
+      - socionext,uniphier-pro5-usb3-ssphy
+      - socionext,uniphier-pxs2-usb3-ssphy
+      - socionext,uniphier-ld20-usb3-ssphy
+      - socionext,uniphier-pxs3-usb3-ssphy
+      - socionext,uniphier-nx1-usb3-ssphy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names: true
+
+  resets:
+    maxItems: 2
+
+  reset-names: true
+
+  vbus-supply:
+    description: A phandle to the regulator for USB VBUS, only for USB host
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-ssphy
+              - socionext,uniphier-pro5-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs2-usb3-ssphy
+              - socionext,uniphier-ld20-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs3-usb3-ssphy
+              - socionext,uniphier-nx1-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: link
+            - const: phy
+            - const: phy-ext
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb_ssphy0: phy@300 {
+        compatible = "socionext,uniphier-ld20-usb3-ssphy";
+        reg = <0x300 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/st-spear-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt
new file mode 100644
index 0000000000..2a6bfdcc09
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt
@@ -0,0 +1,15 @@
+ST SPEAr miphy DT details
+=========================
+
+ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
+
+Required properties:
+- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy"
+- reg : offset and length of the PHY register set.
+- misc: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 1.
+	- cell[1]: 0 if phy used for SATA, 1 for PCIe.
+
+Optional properties:
+- phy-id: Instance id of the phy. Only required when there are multiple phys
+  present on a implementation.
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
new file mode 100644
index 0000000000..7224cde6fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive SoC JH7110 MIPI D-PHY Rx Controller
+
+maintainers:
+  - Jack Zhu <jack.zhu@starfivetech.com>
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+description:
+  StarFive SoCs contain a MIPI CSI D-PHY based on M31 IP, used to
+  transfer CSI camera data.
+
+properties:
+  compatible:
+    const: starfive,jh7110-dphy-rx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: config clock
+      - description: reference clock
+      - description: escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: cfg
+      - const: ref
+      - const: tx
+
+  resets:
+    items:
+      - description: DPHY_HW reset
+      - description: DPHY_B09_ALWAYS_ON reset
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@19820000 {
+      compatible = "starfive,jh7110-dphy-rx";
+      reg = <0x19820000 0x10000>;
+      clocks = <&ispcrg 3>,
+               <&ispcrg 4>,
+               <&ispcrg 5>;
+      clock-names = "cfg", "ref", "tx";
+      resets = <&ispcrg 2>,
+               <&ispcrg 3>;
+      power-domains = <&aon_syscon 1>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
new file mode 100644
index 0000000000..2e83a6164c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PCIe 2.0 PHY
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  starfive,sys-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller sys_syscon node.
+          - description: PHY connect offset of SYS_SYSCONSAIF__SYSCFG register for USB PHY.
+    description:
+      The phandle to System Register Controller syscon node and the PHY connect offset
+      of SYS_SYSCONSAIF__SYSCFG register. Connect PHY to USB3 controller.
+
+  starfive,stg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller stg_syscon node.
+          - description: PHY mode offset of STG_SYSCONSAIF__SYSCFG register.
+          - description: PHY enable for USB offset of STG_SYSCONSAIF__SYSCFG register.
+    description:
+      The phandle to System Register Controller syscon node and the offset
+      of STG_SYSCONSAIF__SYSCFG register for PCIe PHY. Total 2 regsisters offset.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@10210000 {
+        compatible = "starfive,jh7110-pcie-phy";
+        reg = <0x10210000 0x10000>;
+        #phy-cells = <0>;
+        starfive,sys-syscon = <&sys_syscon 0x18>;
+        starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
new file mode 100644
index 0000000000..269e9f9f12
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 USB 2.0 PHY
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-usb-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: PHY 125m
+      - description: app 125m
+
+  clock-names:
+    items:
+      - const: 125m
+      - const: app_125m
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@10200000 {
+        compatible = "starfive,jh7110-usb-phy";
+        reg = <0x10200000 0x10000>;
+        clocks = <&syscrg 95>,
+                 <&stgcrg 6>;
+        clock-names = "125m", "app_125m";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml
new file mode 100644
index 0000000000..57914f214e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/sunplus,sp7021-usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 USB 2.0 PHY Controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-usb2-phy
+
+  reg:
+    items:
+      - description: UPHY register region
+      - description: MOON4 register region
+
+  reg-names:
+    items:
+      - const: phy
+      - const: moon4
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cell-names:
+    description: names corresponding to the nvmem cells of disconnect voltage
+    const: disc_vol
+
+  nvmem-cells:
+    description: nvmem cell address of disconnect voltage
+    maxItems: 1
+
+  sunplus,disc-vol-addr-off:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the otp address offset of disconnect voltage
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - "#phy-cells"
+  - nvmem-cell-names
+  - nvmem-cells
+  - sunplus,disc-vol-addr-off
+
+additionalProperties: false
+
+examples:
+  - |
+    sp_uphy0: usb-phy@9c004a80 {
+      compatible = "sunplus,sp7021-usb2-phy";
+      reg = <0x9c004a80 0x80>, <0x9c000248 0x10>;
+      reg-names = "phy", "moon4";
+      clocks = <&clkc 0x3d>;
+      resets = <&rstc 0x2d>;
+      #phy-cells = <0>;
+      nvmem-cell-names = "disc_vol";
+      nvmem-cells = <&disc_vol>;
+      sunplus,disc-vol-addr-off = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
new file mode 100644
index 0000000000..8694b9eb52
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,dra7x-usb2
+              - ti,dra7x-usb2-phy2
+              - ti,am654-usb2
+          - enum:
+              - ti,omap-usb2
+      - items:
+          - const: ti,am437x-usb2
+      - items:
+          - const: ti,omap-usb2
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    items:
+      - description: wakeup clock
+      - description: reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: wkupclk
+      - const: refclk
+
+  syscon-phy-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the system control module
+          - description: register offset to power on/off the PHY
+    description:
+      phandle/offset pair. Phandle to the system control module and
+      register offset to power on/off the PHY.
+
+  ctrl-module:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      (deprecated) phandle of the control module used by PHY driver
+      to power on the PHY. Use syscon-phy-power instead.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    usb0_phy: phy@4100000 {
+      compatible = "ti,am654-usb2", "ti,omap-usb2";
+      reg = <0x4100000 0x54>;
+      syscon-phy-power = <&scm_conf 0x4000>;
+      clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+      clock-names = "wkupclk", "refclk";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml
new file mode 100644
index 0000000000..854e554eae
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-am654-serdes.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-am654-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM654 SERDES
+
+description:
+  This binding describes the TI AM654 SERDES. AM654 SERDES can be configured
+  to be used with either PCIe or USB or SGMII.
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,phy-am654-serdes
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: serdes
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description:
+      Three input clocks referring to left input reference clock, refclk and right input reference
+      clock.
+
+  '#phy-cells':
+    const: 2
+    description:
+      The 1st cell corresponds to the phy type (should be one of the types specified in
+      include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes lane function.
+
+  ti,serdes-clk:
+    description: Phandle to the SYSCON entry required for configuring SERDES clock selection.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#clock-cells':
+    const: 1
+
+  mux-controls:
+    maxItems: 1
+    description: Phandle to the SYSCON entry required for configuring SERDES lane function.
+
+  clock-output-names:
+    oneOf:
+      - description: Clock output names for SERDES 0
+        items:
+          - const: serdes0_cmu_refclk
+          - const: serdes0_lo_refclk
+          - const: serdes0_ro_refclk
+      - description: Clock output names for SERDES 1
+        items:
+          - const: serdes1_cmu_refclk
+          - const: serdes1_lo_refclk
+          - const: serdes1_ro_refclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - assigned-clocks
+  - assigned-clock-parents
+  - ti,serdes-clk
+  - mux-controls
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy-am654-serdes.h>
+
+    serdes0: serdes@900000 {
+      compatible = "ti,phy-am654-serdes";
+      reg = <0x900000 0x2000>;
+      reg-names = "serdes";
+      #phy-cells = <2>;
+      power-domains = <&k3_pds 153>;
+      clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
+               <&serdes1 AM654_SERDES_LO_REFCLK>;
+      clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+      assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+      assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+      ti,serdes-clk = <&serdes0_clk>;
+      mux-controls = <&serdes_mux 0>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
new file mode 100644
index 0000000000..be41b4547e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-gmii-sel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CPSW Port's Interface Mode Selection PHY
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+description: |
+  TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports
+  two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces.
+  The interface mode is selected by configuring the MII mode selection register(s)
+  (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and
+  bit fields placement in SCM are different between SoCs while fields meaning
+  is the same.
+                                               +--------------+
+        +-------------------------------+      |SCM           |
+        |                     CPSW      |      |  +---------+ |
+        |        +--------------------------------+gmii_sel | |
+        |        |                      |      |  +---------+ |
+        |   +----v---+     +--------+   |      +--------------+
+        |   |Port 1..<--+-->GMII/MII<------->
+        |   |        |  |  |        |   |
+        |   +--------+  |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RMII   <------->
+        |               +-->        |   |
+        |               |  +--------+   |
+        |               |               |
+        |               |  +--------+   |
+        |               |  | RGMII  <------->
+        |               +-->        |   |
+        |                  +--------+   |
+        +-------------------------------+
+
+  CPSW Port's Interface Mode Selection PHY describes MII interface mode between
+  CPSW Port and Ethernet PHY which depends on Eth PHY and board configuration.
+  |
+  CPSW Port's Interface Mode Selection PHY device should defined as child device
+  of SCM node (scm_conf) and can be attached to each CPSW port node using standard
+  PHY bindings.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-phy-gmii-sel
+      - ti,dra7xx-phy-gmii-sel
+      - ti,am43xx-phy-gmii-sel
+      - ti,dm814-phy-gmii-sel
+      - ti,am654-phy-gmii-sel
+      - ti,j7200-cpsw5g-phy-gmii-sel
+      - ti,j721e-cpsw9g-phy-gmii-sel
+      - ti,j784s4-cpsw9g-phy-gmii-sel
+
+  reg:
+    maxItems: 1
+
+  '#phy-cells': true
+
+  ti,qsgmii-main-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Required only for QSGMII mode. Array to select the port/s for QSGMII
+      main mode. The size of the array corresponds to the number of QSGMII
+      interfaces and thus, the number of distinct QSGMII main ports,
+      supported by the device. If the device supports two QSGMII interfaces
+      but only one QSGMII interface is desired, repeat the QSGMII main port
+      value corresponding to the QSGMII interface in the array.
+    minItems: 1
+    maxItems: 2
+    items:
+      minimum: 1
+      maximum: 8
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,dra7xx-phy-gmii-sel
+              - ti,dm814-phy-gmii-sel
+              - ti,am654-phy-gmii-sel
+              - ti,j7200-cpsw5g-phy-gmii-sel
+              - ti,j721e-cpsw9g-phy-gmii-sel
+              - ti,j784s4-cpsw9g-phy-gmii-sel
+    then:
+      properties:
+        '#phy-cells':
+          const: 1
+          description: CPSW port number (starting from 1)
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j7200-cpsw5g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports:
+          maxItems: 1
+          items:
+            minimum: 1
+            maximum: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j721e-cpsw9g-phy-gmii-sel
+              - ti,j784s4-cpsw9g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports:
+          minItems: 2
+          maxItems: 2
+          items:
+            minimum: 1
+            maximum: 8
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j7200-cpsw5g-phy-gmii-sel
+                - ti,j721e-cpsw9g-phy-gmii-sel
+                - ti,j784s4-cpsw9g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am3352-phy-gmii-sel
+              - ti,am43xx-phy-gmii-sel
+    then:
+      properties:
+        '#phy-cells':
+          const: 2
+          description: |
+            - CPSW port number (starting from 1)
+            - RMII refclk mode
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    phy_gmii_sel: phy@650 {
+        compatible = "ti,am3352-phy-gmii-sel";
+        reg = <0x650 0x4>;
+        #phy-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
new file mode 100644
index 0000000000..3f16ff1448
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E WIZ (SERDES Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-wiz-16g
+      - ti,j721e-wiz-10g
+      - ti,j721s2-wiz-10g
+      - ti,am64-wiz-10g
+      - ti,j7200-wiz-10g
+      - ti,j784s4-wiz-10g
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+    description: clock-specifier to represent input to the WIZ
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: fck
+      - const: core_ref_clk
+      - const: ext_ref_clk
+      - const: core_ref1_clk
+
+  num-lanes:
+    minimum: 1
+    maximum: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  ranges: true
+
+  typec-dir-gpios:
+    maxItems: 1
+    description:
+      GPIO to signal Type-C cable orientation for lane swap.
+      If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
+      achieve the functionality of an external type-C plug flip mux.
+
+  typec-dir-debounce-ms:
+    minimum: 100
+    maximum: 1000
+    default: 100
+    description:
+      Number of milliseconds to wait before sampling typec-dir-gpio.
+      If not specified, the default debounce of 100ms will be used.
+      Type-C spec states minimum CC pin debounce of 100 ms and maximum
+      of 200 ms. However, some solutions might need more than 200 ms.
+
+  refclk-dig:
+    type: object
+    additionalProperties: false
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    deprecated: true
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 4
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  ti,scm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to System Control Module for syscon regmap access.
+
+patternProperties:
+  "^pll[0|1]-refclk$":
+    type: object
+    additionalProperties: false
+    description: |
+      WIZ node should have subnodes for each of the PLLs present in
+      the SERDES.
+    deprecated: true
+    properties:
+      clocks:
+        maxItems: 2
+        description: Phandle to clock nodes representing the two inputs to PLL.
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  "^cmn-refclk1?-dig-div$":
+    type: object
+    additionalProperties: false
+    description:
+      WIZ node should have subnodes for each of the PMA common refclock
+      provided by the SERDES.
+    deprecated: true
+    properties:
+      clocks:
+        maxItems: 1
+        description: Phandle to the clock node representing the input to the
+          divider clock.
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+
+  "^serdes@[0-9a-f]+$":
+    type: object
+    description: |
+      WIZ node should have '1' subnode for the SERDES. It could be either
+      Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
+      bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
+      Torrent SERDES should follow the bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+
+required:
+  - compatible
+  - power-domains
+  - clocks
+  - clock-names
+  - num-lanes
+  - "#address-cells"
+  - "#size-cells"
+  - "#reset-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-wiz-10g
+    then:
+      required:
+        - ti,scm
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    wiz@5000000 {
+           compatible = "ti,j721e-wiz-16g";
+           #address-cells = <1>;
+           #size-cells = <1>;
+           power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+           clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+           assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+           assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+           num-lanes = <2>;
+           #reset-cells = <1>;
+           ranges = <0x5000000 0x5000000 0x10000>;
+
+           pll0-refclk {
+                  clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll0_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 13>;
+           };
+
+           pll1-refclk {
+                  clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll1_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 0>;
+           };
+
+           cmn-refclk-dig-div {
+                  clocks = <&wiz1_refclk_dig>;
+                  #clock-cells = <0>;
+           };
+
+           cmn-refclk1-dig-div {
+                  clocks = <&wiz1_pll1_refclk>;
+                  #clock-cells = <0>;
+           };
+
+           refclk-dig {
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
+                          <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz0_refclk_dig>;
+                  assigned-clock-parents = <&k3_clks 292 11>;
+           };
+
+           serdes@5000000 {
+                  compatible = "ti,sierra-phy-t0";
+                  reg-names = "serdes";
+                  reg = <0x5000000 0x10000>;
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  resets = <&serdes_wiz0 0>;
+                  reset-names = "sierra_reset";
+                  clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+                  clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+           };
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
new file mode 100644
index 0000000000..79dad3e89a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TCAN104x CAN TRANSCEIVER PHY
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  $nodename:
+    pattern: "^can-phy"
+
+  compatible:
+    enum:
+      - nxp,tjr1443
+      - ti,tcan1042
+      - ti,tcan1043
+
+  '#phy-cells':
+    const: 0
+
+  standby-gpios:
+    description:
+      gpio node to toggle standby signal on transceiver
+    maxItems: 1
+
+  enable-gpios:
+    description:
+      gpio node to toggle enable signal on transceiver
+    maxItems: 1
+
+  max-bitrate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      max bit rate supported in bps
+    minimum: 1
+
+  mux-states:
+    description:
+      mux controller node to route the signals from controller to
+      transceiver.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    transceiver1: can-phy {
+      compatible = "ti,tcan1043";
+      #phy-cells = <0>;
+      max-bitrate = <5000000>;
+      standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
+      enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>;
+      mux-states = <&mux0 1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
new file mode 100644
index 0000000000..7c7936b89f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -0,0 +1,98 @@
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
+
+OMAP CONTROL PHY
+
+Required properties:
+ - compatible: Should be one of
+ "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
+ "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
+                        e.g. USB2_PHY on OMAP5.
+ "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
+                        e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-pcie" - for pcie to support external clock for pcie and to
+			set PCS delay value.
+			e.g. PCIE PHY in DRA7x
+ "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
+                        DRA7 platform.
+ "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
+                        AM437 platform.
+ - reg : register ranges as listed in the reg-names property
+ - reg-names: "otghs_control" for control-phy-otghs
+	      "power", "pcie_pcs" and "control_sma" for control-phy-pcie
+	      "power" for all other types
+
+omap_control_usb: omap-control-usb@4a002300 {
+        compatible = "ti,control-phy-otghs";
+        reg = <0x4a00233c 0x4>;
+        reg-names = "otghs_control";
+};
+
+TI PIPE3 PHY
+
+Required properties:
+ - compatible: Should be "ti,phy-usb3", "ti,phy-pipe3-sata" or
+   "ti,phy-pipe3-pcie. "ti,omap-usb3" is deprecated.
+ - reg : Address and length of the register set for the device.
+ - reg-names: The names of the register addresses corresponding to the registers
+   filled in "reg".
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+   clock-names.
+ - clock-names: should include:
+   * "wkupclk" - wakeup clock.
+   * "sysclk" - system clock.
+   * "refclk" - reference clock.
+   * "dpll_ref" - external dpll ref clk
+   * "dpll_ref_m2" - external dpll ref clk
+   * "phy-div" - divider for apll
+   * "div-clk" - apll clock
+
+Optional properties:
+ - id: If there are multiple instance of the same type, in order to
+   differentiate between each instance "id" can be used (e.g., multi-lane PCIe
+   PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+   CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+   register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
+ - syscon-pcs : phandle/offset pair. Phandle to the system control module and the
+   register offset to write the PCS delay value.
+
+Deprecated properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+Recommended properties:
+ - syscon-phy-power : phandle/offset pair. Phandle to the system control
+   module and the register offset to power on/off the PHY.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb3phy@4a084400 {
+	compatible = "ti,phy-usb3";
+	reg = <0x4a084400 0x80>,
+	      <0x4a084800 0x64>,
+	      <0x4a084c00 0x40>;
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
+	clocks = <&usb_phy_cm_clk32k>,
+		 <&sys_clkin>,
+		 <&usb_otg_ss_refclk960m>;
+	clock-names =	"wkupclk",
+			"sysclk",
+			"refclk";
+};
+
+sata_phy: phy@4a096000 {
+	compatible = "ti,phy-pipe3-sata";
+	reg = <0x4A096000 0x80>, /* phy_rx */
+	      <0x4A096400 0x64>, /* phy_tx */
+	      <0x4A096800 0x40>; /* pll_ctrl */
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_sata>;
+	clocks = <&sys_clkin1>, <&sata_ref_clk>;
+	clock-names = "sysclk", "refclk";
+	syscon-pllreset = <&scm_conf 0x3fc>;
+	#phy-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
new file mode 100644
index 0000000000..617f3c0b3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common PHY and network PCS transmit amplitude property
+
+description:
+  Binding describing the peak-to-peak transmit amplitude for common PHYs
+  and network PCSes.
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+properties:
+  tx-p2p-microvolt:
+    description:
+      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
+      contains multiple values for various PHY modes, the
+      'tx-p2p-microvolt-names' property must be provided and contain
+      corresponding mode names.
+
+  tx-p2p-microvolt-names:
+    description: |
+      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
+      property. Required only if multiple voltages are provided.
+
+      If a value of 'default' is provided, the system should use it for any PHY
+      mode that is otherwise not defined here. If 'default' is not provided, the
+      system should use manufacturer default value.
+    minItems: 1
+    maxItems: 16
+    items:
+      enum:
+        - default
+
+        # ethernet modes
+        - sgmii
+        - qsgmii
+        - xgmii
+        - 1000base-x
+        - 2500base-x
+        - 5gbase-r
+        - rxaui
+        - xaui
+        - 10gbase-kr
+        - usxgmii
+        - 10gbase-r
+        - 25gbase-r
+
+        # PCIe modes
+        - pcie
+        - pcie1
+        - pcie2
+        - pcie3
+        - pcie4
+        - pcie5
+        - pcie6
+
+        # USB modes
+        - usb
+        - usb-ls
+        - usb-fs
+        - usb-hs
+        - usb-ss
+        - usb-ss+
+        - usb-4
+
+        # storage modes
+        - sata
+        - ufs-hs
+        - ufs-hs-a
+        - ufs-hs-b
+
+        # display modes
+        - lvds
+        - dp
+        - dp-rbr
+        - dp-hbr
+        - dp-hbr2
+        - dp-hbr3
+        - dp-uhbr-10
+        - dp-uhbr-13.5
+        - dp-uhbr-20
+
+        # camera modes
+        - mipi-dphy
+        - mipi-dphy-univ
+        - mipi-dphy-v2.5-univ
+
+dependencies:
+  tx-p2p-microvolt-names: [ tx-p2p-microvolt ]
+
+additionalProperties: true
+
+examples:
+  - |
+    phy: phy {
+      #phy-cells = <1>;
+      tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
+      tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss";
+    };
diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
new file mode 100644
index 0000000000..cefbc8b53a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP Gigabit Transceiver PHY
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The
+  GTR provides four lanes and is used by USB, SATA, PCIE, Display port and
+  Ethernet SGMII controllers.
+
+properties:
+  "#phy-cells":
+    const: 4
+    description: |
+      The cells contain the following arguments.
+
+      - description: The GTR lane
+        minimum: 0
+        maximum: 3
+      - description: The PHY type
+        enum:
+          - PHY_TYPE_DP
+          - PHY_TYPE_PCIE
+          - PHY_TYPE_SATA
+          - PHY_TYPE_SGMII
+          - PHY_TYPE_USB3
+      - description: The PHY instance
+        minimum: 0
+        maximum: 1 # for DP, SATA or USB
+        maximum: 3 # for PCIE or SGMII
+      - description: The reference clock number
+        minimum: 0
+        maximum: 3
+
+  compatible:
+    enum:
+      - xlnx,zynqmp-psgtr-v1.1
+      - xlnx,zynqmp-psgtr
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected
+      inputs shall not have an entry.
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: "^ref[0-3]$"
+
+  reg:
+    items:
+      - description: SERDES registers block
+      - description: SIOU registers block
+
+  reg-names:
+    items:
+      - const: serdes
+      - const: siou
+
+  xlnx,tx-termination-fix:
+    description: |
+      Include this for fixing functional issue with the TX termination
+      resistance in GT, which can be out of spec for the XCZU9EG silicon
+      version.
+    type: boolean
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - reg-names
+
+if:
+  properties:
+    compatible:
+      const: xlnx,zynqmp-psgtr-v1.1
+
+then:
+  properties:
+    xlnx,tx-termination-fix: false
+
+additionalProperties: false
+
+examples:
+  - |
+    phy: phy@fd400000 {
+        compatible = "xlnx,zynqmp-psgtr-v1.1";
+        reg = <0xfd400000 0x40000>,
+              <0xfd3d0000 0x1000>;
+        reg-names = "serdes", "siou";
+        clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>;
+        clock-names = "ref1", "ref2", "ref3";
+        #phy-cells = <4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
new file mode 100644
index 0000000000..c591b9cb5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
@@ -0,0 +1,80 @@
+Abilis Systems TB10x pin controller
+===================================
+
+Required properties
+-------------------
+
+- compatible: should be "abilis,tb10x-iomux";
+- reg: should contain the physical address and size of the pin controller's
+  register range.
+
+
+Function definitions
+--------------------
+
+Functions are defined (and referenced) by sub-nodes of the pin controller.
+Every sub-node defines exactly one function (implying a set of pins).
+Every function is associated to one named pin group inside the pin controller
+driver and these names are used to associate pin group predefinitions to pin
+controller sub-nodes.
+
+Required function definition subnode properties:
+  - abilis,function: should be set to the name of the function's pin group.
+
+The following pin groups are available:
+  - GPIO ports: gpioa, gpiob, gpioc, gpiod, gpioe, gpiof, gpiog,
+                gpioh, gpioi, gpioj, gpiok, gpiol, gpiom, gpion
+  - Serial TS input ports: mis0, mis1, mis2, mis3, mis4, mis5, mis6, mis7
+  - Parallel TS input ports: mip1, mip3, mip5, mip7
+  - Serial TS output ports: mos0, mos1, mos2, mos3
+  - Parallel TS output port: mop
+  - CI+ port: ciplus
+  - CableCard (Mcard) port: mcard
+  - Smart card ports: stc0, stc1
+  - UART ports: uart0, uart1
+  - SPI ports: spi1, spi3
+  - JTAG: jtag
+
+All other ports of the chip are not multiplexed and thus not managed by this
+driver.
+
+
+GPIO ranges definition
+----------------------
+
+The named pin groups of GPIO ports can be used to define GPIO ranges as
+explained in Documentation/devicetree/bindings/gpio/gpio.txt.
+
+
+Example
+-------
+
+iomux: iomux@ff10601c {
+	compatible = "abilis,tb10x-iomux";
+	reg = <0xFF10601c 0x4>;
+	pctl_gpio_a: pctl-gpio-a {
+		abilis,function = "gpioa";
+	};
+	pctl_uart0: pctl-uart0 {
+		abilis,function = "uart0";
+	};
+};
+uart@ff100000 {
+	compatible = "snps,dw-apb-uart";
+	reg = <0xFF100000 0x100>;
+	clock-frequency = <166666666>;
+	interrupts = <25 1>;
+	reg-shift = <2>;
+	reg-io-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pctl_uart0>;
+};
+gpioa: gpio@ff140000 {
+	compatible = "abilis,tb10x-gpio";
+	reg = <0xFF140000 0x1000>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	ngpio = <3>;
+	gpio-ranges = <&iomux 0 0>;
+	gpio-ranges-group-names = "gpioa";
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
new file mode 100644
index 0000000000..7cb8a747fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S500 SoC pinmux & GPIO controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+  Pinmux & GPIO controller manages pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration. Please refer to
+  pinctrl-bindings.txt in this directory for common binding part and usage.
+
+properties:
+  compatible:
+    const: actions,s500-pinctrl
+
+  reg:
+    items:
+      - description: GPIO Output + GPIO Input + GPIO Data
+      - description: Multiplexing Control
+      - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
+      - description: PAD Drive Capacity Select
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the pin number and flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  interrupts:
+    description:
+      One interrupt per each of the 5 GPIO ports supported by the controller,
+      sorted by port number ascending order.
+    minItems: 5
+    maxItems: 5
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the functions specified in
+              this subnode.
+            items:
+              oneOf:
+                - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
+                         rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
+                         rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
+                         i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
+                         ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
+                         ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+                         dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
+                         dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
+                         spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
+                         dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+                         uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+                         sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+                         uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+                         uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+                         pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+                         dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+                         nand_ceb3_mfp]
+            minItems: 1
+            maxItems: 32
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given gpio pin groups.
+            enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+                   sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+                   i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                   p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+                   mipi_csi, nand, spdif, ts, lcd0]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^(.*-)?pinconf$':
+        type: object
+        description:
+          Pinctrl node's client devices specify pin configurations using
+          subnodes, which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of gpio pin groups affected by the drive-strength property
+              specified in this subnode.
+            items:
+              oneOf:
+                - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
+                         rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+                         smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+                         i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+                         lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+                         sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+                         spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+                         i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+                         sens0_ckout_drv, uart3_all_drv]
+            minItems: 1
+            maxItems: 32
+
+          pins:
+            description:
+              List of gpio pins affected by the bias-pull-* and
+              input-schmitt-* properties specified in this subnode.
+            items:
+              oneOf:
+                - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
+                         eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+                         eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+                         i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+                         i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
+                         ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+                         lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
+                         lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
+                         lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
+                         dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
+                         dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
+                         sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                         spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                         uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+                         sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
+                         dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
+                         uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
+                         pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
+                         i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
+                         csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+                         csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
+                         dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
+                         dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
+                         pkg2, pkg3]
+            minItems: 1
+            maxItems: 64
+
+          bias-pull-up: true
+          bias-pull-down: true
+
+          drive-strength:
+            description:
+              Selects the drive strength for the specified pins, in mA.
+            enum: [2, 4, 8, 12]
+
+          input-schmitt-enable: true
+          input-schmitt-disable: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - gpio-ranges
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl@b01b0000 {
+        compatible = "actions,s500-pinctrl";
+        reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
+              <0xb01b0060 0x18>, <0xb01b0080 0xc>;
+        clocks = <&cmu 55>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 132>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        mmc0_pins: mmc0-pins {
+            pinmux {
+                groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+                         "sd0_cmd_mfp", "sd0_clk_mfp";
+                function = "sd0";
+            };
+
+            drv-pinconf {
+                groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+                drive-strength = <8>;
+            };
+
+            bias-pinconf {
+                pins = "sd0_d0", "sd0_d1", "sd0_d2",
+                       "sd0_d3", "sd0_cmd";
+                bias-pull-up;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
new file mode 100644
index 0000000000..d13ff82f85
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
@@ -0,0 +1,170 @@
+Actions Semi S700 Pin Controller
+
+This binding describes the pin controller found in the S700 SoC.
+
+Required Properties:
+
+- compatible:   Should be "actions,s700-pinctrl"
+- reg:          Should contain the register base address and size of
+		the pin controller.
+- clocks:       phandle of the clock feeding the pin controller
+- gpio-controller: Marks the device node as a GPIO controller.
+- gpio-ranges: Specifies the mapping between gpio controller and
+               pin-controller pins.
+- #gpio-cells: Should be two. The first cell is the gpio pin number
+		and the second cell is used for optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+		interrupt.  Shall be set to 2.  The first cell
+		defines the interrupt number, the second encodes
+		the trigger flags described in
+		bindings/interrupt-controller/interrupts.txt
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+              interrupt per GPIO bank. The number of interrupts listed depends
+              on the number of GPIO banks on the SoC. The interrupts must be
+              ordered by bank, starting with bank 0.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Pinmux functions are available only for the pin groups while pinconf
+parameters are available for both pin groups and individual pins.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+Required Properties:
+
+- pins:		An array of strings, each string containing the name of a pin.
+		These pins are used for selecting the pull control and schmitt
+		trigger parameters. The following are the list of pins
+		available:
+
+		eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer,
+		eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk,
+		eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+		i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+		pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2,
+		ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
+		lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
+		lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+		lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18,
+		lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn,
+		dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2,
+		sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk,
+		sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx,
+		uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx,
+		uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk,
+		i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1,
+		csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+		sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2,
+		dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb,
+		dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0,
+		dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2,
+		dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3
+
+- groups:       An array of strings, each string containing the name of a pin
+                group. These pin groups are used for selecting the pinmux
+                functions.
+		rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp,
+		rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp,
+		rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp,
+		i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
+		i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp,
+		ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+		dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
+		lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp,
+		dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
+		uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp,
+		sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+		uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp,
+		i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp,
+		pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp,
+		nand_ceb2_mfp, nand_ceb3_mfp
+
+		These pin groups are used for selecting the drive strength
+		parameters.
+
+		sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv,
+		rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv,
+		smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv,
+		pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv,
+		dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv,
+		uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv,
+		sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv
+
+- function:	An array of strings, each string containing the name of the
+		pinmux functions. These functions can only be selected by
+		the corresponding pin groups. The following are the list of
+		pinmux functions available:
+
+		nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1,
+		uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
+		pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0,
+		sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30,
+		clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0
+
+Optional Properties:
+
+- bias-pull-down: No arguments. The specified pins should be configured as
+		pull down.
+- bias-pull-up:   No arguments. The specified pins should be configured as
+		pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+		pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+		pins
+- drive-strength: Integer. Selects the drive strength for the specified
+		pins in mA.
+		Valid values are:
+		<2>
+		<4>
+		<8>
+		<12>
+
+Example:
+
+	pinctrl: pinctrl@e01b0000 {
+		compatible = "actions,s700-pinctrl";
+		reg = <0x0 0xe01b0000 0x0 0x1000>;
+		clocks = <&cmu CLK_GPIO>;
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 0 136>;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+                interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		uart3-default: uart3-default {
+			pinmux {
+				groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp";
+				function = "uart3";
+			};
+			pinconf {
+				groups = "uart3_all_drv";
+				drive-strength = <2>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
new file mode 100644
index 0000000000..81b58dddd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
@@ -0,0 +1,204 @@
+Actions Semi S900 Pin Controller
+
+This binding describes the pin controller found in the S900 SoC.
+
+Required Properties:
+
+- compatible:   Should be "actions,s900-pinctrl"
+- reg:          Should contain the register base address and size of
+                the pin controller.
+- clocks:       phandle of the clock feeding the pin controller
+- gpio-controller: Marks the device node as a GPIO controller.
+- gpio-ranges: Specifies the mapping between gpio controller and
+               pin-controller pins.
+- #gpio-cells: Should be two. The first cell is the gpio pin number
+               and the second cell is used for optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+                    interrupt.  Shall be set to 2.  The first cell
+                    defines the interrupt number, the second encodes
+                    the trigger flags described in
+                    bindings/interrupt-controller/interrupts.txt
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+              interrupt per GPIO bank. The number of interrupts listed depends
+              on the number of GPIO banks on the SoC. The interrupts must be
+              ordered by bank, starting with bank 0.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Pinmux functions are available only for the pin groups while pinconf
+parameters are available for both pin groups and individual pins.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+Required Properties:
+
+- pins:           An array of strings, each string containing the name of a pin.
+                  These pins are used for selecting the pull control and schmitt
+                  trigger parameters. The following are the list of pins
+                  available:
+
+                  eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv,
+                  eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio,
+                  sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0,
+                  i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+                  pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5,
+                  eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11,
+                  lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+                  lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan,
+                  lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+                  lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean,
+                  sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1,
+                  sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+                  spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+                  uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb,
+                  uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx,
+                  uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata,
+                  i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1,
+                  csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3,
+                  csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp,
+                  dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk,
+                  csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp,
+                  sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3,
+                  nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs,
+                  nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1,
+                  nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2,
+                  nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs,
+                  nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1,
+                  nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3
+
+- groups:         An array of strings, each string containing the name of a pin
+                  group. These pin groups are used for selecting the pinmux
+                  functions.
+
+                  lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp,
+                  sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp,
+                  rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp,
+                  rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp,
+                  i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp,
+                  pcm1_clk_mfp, pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp,
+                  eram_a7_mfp, eram_a8_mfp, eram_a9_mfp, eram_a10_mfp,
+                  eram_a11_mfp, lvds_oep_odn_mfp, lvds_ocp_obn_mfp,
+                  lvds_oap_oan_mfp, lvds_e_mfp, spi0_sclk_mosi_mfp, spi0_ss_mfp,
+                  spi0_miso_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+                  uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+                  sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_clk_mfp,
+                  uart0_rx_mfp, nand0_d0_ceb3_mfp, uart0_tx_mfp, i2c0_mfp,
+                  csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, csi1_dn0_cp_mfp,
+                  dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp,
+                  nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp,
+                  csi1_dn0_dp0_mfp, uart4_rx_tx_mfp
+
+
+                  These pin groups are used for selecting the drive strength
+                  parameters.
+
+                  sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv,
+                  rmii_tx_d0_d1_drv, rmii_txen_rxer_drv, rmii_crs_dv_drv,
+                  rmii_rx_d1_d0_drv, rmii_ref_clk_drv, rmii_mdc_mdio_drv,
+                  sirq_0_1_drv, sirq2_drv, i2s_d0_d1_drv, i2s_lr_m_clk0_drv,
+                  i2s_blk1_mclk1_drv, pcm1_in_out_drv, lvds_oap_oan_drv,
+                  lvds_oep_odn_drv, lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv,
+                  sd1_d3_d0_drv, sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv,
+                  spi0_ss_miso_drv, uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv,
+                  uart3_drv, i2c0_drv, i2c1_drv, i2c2_drv, sensor0_drv
+
+                  These pin groups are used for selecting the slew rate
+                  parameters.
+
+                  sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr,
+                  rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr,
+                  rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr,
+                  i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr,
+                  pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr,
+                  spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr,
+                  uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr,
+                  sensor0_sr
+
+- function:       An array of strings, each string containing the name of the
+                  pinmux functions. These functions can only be selected by
+                  the corresponding pin groups. The following are the list of
+                  pinmux functions available:
+
+                  eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+                  uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
+                  pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0,
+                  sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds,
+                  usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0,
+                  nand1, spdif, sirq0, sirq1, sirq2
+
+Optional Properties:
+
+- bias-bus-hold:  No arguments. The specified pins should retain the previous
+                  state value.
+- bias-high-impedance: No arguments. The specified pins should be configured
+                  as high impedance.
+- bias-pull-down: No arguments. The specified pins should be configured as
+                  pull down.
+- bias-pull-up:   No arguments. The specified pins should be configured as
+                  pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+                  pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+                  pins
+- slew-rate:      Integer. Sets slew rate for the specified pins.
+                  Valid values are:
+                  <0>  - Slow
+                  <1>  - Fast
+- drive-strength: Integer. Selects the drive strength for the specified
+                  pins in mA.
+                  Valid values are:
+                  <2>
+                  <4>
+                  <8>
+                  <12>
+
+Example:
+
+          pinctrl: pinctrl@e01b0000 {
+                  compatible = "actions,s900-pinctrl";
+                  reg = <0x0 0xe01b0000 0x0 0x1000>;
+                  clocks = <&cmu CLK_GPIO>;
+                  gpio-controller;
+                  gpio-ranges = <&pinctrl 0 0 146>;
+                  #gpio-cells = <2>;
+                  interrupt-controller;
+                  #interrupt-cells = <2>;
+                  interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+                  uart2-default: uart2-default {
+                          pinmux {
+                                  groups = "lvds_oep_odn_mfp";
+                                  function = "uart2";
+                          };
+                          pinconf {
+                                  groups = "lvds_oep_odn_drv";
+                                  drive-strength = <12>;
+                          };
+                  };
+          };
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
new file mode 100644
index 0000000000..4502405703
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Pin Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#gpio-cells":
+    const: 3
+    description:
+      GPIO consumers must use three arguments, first the number of the
+      bank, then the pin number inside that bank, and finally the GPIO
+      flags.
+
+  "#interrupt-cells":
+    const: 3
+    description:
+      Interrupts consumers must use three arguments, first the number
+      of the bank, then the pin number inside that bank, and finally
+      the interrupts flags.
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-pinctrl
+      - allwinner,sun5i-a10s-pinctrl
+      - allwinner,sun5i-a13-pinctrl
+      - allwinner,sun6i-a31-pinctrl
+      - allwinner,sun6i-a31-r-pinctrl
+      - allwinner,sun6i-a31s-pinctrl
+      - allwinner,sun7i-a20-pinctrl
+      - allwinner,sun8i-a23-pinctrl
+      - allwinner,sun8i-a23-r-pinctrl
+      - allwinner,sun8i-a33-pinctrl
+      - allwinner,sun8i-a83t-pinctrl
+      - allwinner,sun8i-a83t-r-pinctrl
+      - allwinner,sun8i-h3-pinctrl
+      - allwinner,sun8i-h3-r-pinctrl
+      - allwinner,sun8i-r40-pinctrl
+      - allwinner,sun8i-v3-pinctrl
+      - allwinner,sun8i-v3s-pinctrl
+      - allwinner,sun9i-a80-pinctrl
+      - allwinner,sun9i-a80-r-pinctrl
+      - allwinner,sun20i-d1-pinctrl
+      - allwinner,sun50i-a64-pinctrl
+      - allwinner,sun50i-a64-r-pinctrl
+      - allwinner,sun50i-a100-pinctrl
+      - allwinner,sun50i-a100-r-pinctrl
+      - allwinner,sun50i-h5-pinctrl
+      - allwinner,sun50i-h6-pinctrl
+      - allwinner,sun50i-h6-r-pinctrl
+      - allwinner,sun50i-h616-pinctrl
+      - allwinner,sun50i-h616-r-pinctrl
+      - allwinner,suniv-f1c100s-pinctrl
+      - nextthing,gr8-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description:
+      One interrupt per external interrupt bank supported on the
+      controller, sorted by bank number ascending order.
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+      - description: Low Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: apb
+      - const: hosc
+      - const: losc
+
+  gpio-controller: true
+  interrupt-controller: true
+  gpio-line-names: true
+
+  input-debounce:
+    description:
+      Debouncing periods in microseconds, one period per interrupt
+      bank found in the controller
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  # It's pretty scary, but the basic idea is that:
+  #   - One node name can start with either s- or r- for PRCM nodes,
+  #   - Then, the name itself can be any repetition of <string>- (to
+  #     accommodate with nodes like uart4-rts-cts-pins), where each
+  #     string can be either starting with 'p' but in a string longer
+  #     than 3, or something that doesn't start with 'p',
+  #   - Then, the bank name is optional and will be between pa and pg,
+  #     pl or pm. Some pins groups that have several options will have
+  #     the pin numbers then,
+  #   - Finally, the name will end with either -pin or pins.
+
+  "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$":
+    type: object
+
+    properties:
+      pins: true
+      function: true
+      bias-disable: true
+      bias-pull-up: true
+      bias-pull-down: true
+
+      drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [10, 20, 30, 40]
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+  "^vcc-p[a-ilm]-supply$":
+    description:
+      Power supplies for pin banks.
+
+required:
+  - "#gpio-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+
+allOf:
+  # FIXME: We should have the pin bank supplies here, but not a lot of
+  # boards are defining it at the moment so it would generate a lot of
+  # warnings.
+
+  - $ref: pinctrl.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - allwinner,sun50i-h616-r-pinctrl
+
+    then:
+      required:
+        - "#interrupt-cells"
+        - interrupts
+        - interrupt-controller
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun50i-h616-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun50i-a100-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun20i-d1-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun9i-a80-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 5
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-pinctrl
+            - allwinner,sun6i-a31s-pinctrl
+            - allwinner,sun50i-h6-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-a23-pinctrl
+            - allwinner,sun8i-a83t-pinctrl
+            - allwinner,sun50i-a64-pinctrl
+            - allwinner,sun50i-h5-pinctrl
+            - allwinner,suniv-f1c100s-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-r-pinctrl
+            - allwinner,sun8i-a33-pinctrl
+            - allwinner,sun8i-h3-pinctrl
+            - allwinner,sun8i-v3-pinctrl
+            - allwinner,sun8i-v3s-pinctrl
+            - allwinner,sun9i-a80-r-pinctrl
+            - allwinner,sun50i-h6-r-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun4i-a10-pinctrl
+            - allwinner,sun5i-a10s-pinctrl
+            - allwinner,sun5i-a13-pinctrl
+            - allwinner,sun7i-a20-pinctrl
+            - allwinner,sun8i-a23-r-pinctrl
+            - allwinner,sun8i-a83t-r-pinctrl
+            - allwinner,sun8i-h3-r-pinctrl
+            - allwinner,sun8i-r40-pinctrl
+            - allwinner,sun50i-a64-r-pinctrl
+            - allwinner,sun50i-a100-r-pinctrl
+            - nextthing,gr8-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun5i-ccu.h>
+
+    pio: pinctrl@1c20800 {
+        compatible = "allwinner,sun5i-a13-pinctrl";
+        reg = <0x01c20800 0x400>;
+        interrupts = <28>;
+        clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+        clock-names = "apb", "hosc", "losc";
+        gpio-controller;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        #gpio-cells = <3>;
+
+        uart1_pe_pins: uart1-pe-pins {
+            pins = "PE10", "PE11";
+            function = "uart1";
+        };
+
+        uart1_pg_pins: uart1-pg-pins {
+            pins = "PG3", "PG4";
+            function = "uart1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
new file mode 100644
index 0000000000..4e7a456ea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson A1 pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-periphs-pinctrl
+      - amlogic,meson-a1-periphs-pinctrl
+      - amlogic,meson-s4-periphs-pinctrl
+
+required:
+  - compatible
+
+patternProperties:
+  "^bank@[0-9a-z]+$":
+    $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 2
+
+      reg-names:
+        items:
+          - const: mux
+          - const: gpio
+
+      gpio-line-names:
+        minItems: 62 # A1
+        maxItems: 82 # S4
+
+unevaluatedProperties:
+  type: object
+  $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+  - |
+    periphs_pinctrl: pinctrl {
+      compatible = "amlogic,meson-a1-periphs-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bank@400 {
+        reg = <0x0400 0x003c>,
+              <0x0480 0x0118>;
+        reg-names = "mux", "gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&periphs_pinctrl 0 0 62>;
+      };
+
+      cec_ao_a_h_pins: cec_ao_a_h {
+        mux {
+          groups = "cec_ao_a_h";
+          function = "cec_ao_a_h";
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
new file mode 100644
index 0000000000..e707c222a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  ranges: true
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+required:
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+$defs:
+  meson-gpio:
+    type: object
+
+    properties:
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+    patternProperties:
+      "^.+-hog(-[0-9]+)?$":
+        type: object
+
+        required:
+          - gpio-hog
+
+    required:
+      - reg
+      - reg-names
+      - gpio-controller
+      - "#gpio-cells"
+      - gpio-ranges
+
+  meson-pins:
+    type: object
+    additionalProperties:
+      type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
new file mode 100644
index 0000000000..0942ea60c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12 AOBUS pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-aobus-pinctrl
+
+required:
+  - compatible
+
+patternProperties:
+  "^bank@[0-9a-z]+$":
+    $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 3
+
+      reg-names:
+        items:
+          - const: mux
+          - const: ds
+          - const: gpio
+
+      gpio-line-names:
+        maxItems: 15
+
+unevaluatedProperties:
+  type: object
+  $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+  - |
+    ao_pinctrl: pinctrl {
+      compatible = "amlogic,meson-g12a-aobus-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bank@14 {
+        reg = <0x14 0x8>,
+              <0x1c 0x8>,
+              <0x24 0x14>;
+        reg-names = "mux", "ds", "gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&ao_pinctrl 0 0 15>;
+      };
+
+      cec_ao_a_h_pins: cec_ao_a_h {
+        mux {
+          groups = "cec_ao_a_h";
+          function = "cec_ao_a_h";
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
new file mode 100644
index 0000000000..e3c8bde305
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12 PERIPHS pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-g12a-periphs-pinctrl
+
+required:
+  - compatible
+
+patternProperties:
+  "^bank@[0-9a-z]+$":
+    $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 5
+
+      reg-names:
+        items:
+          - const: gpio
+          - const: pull
+          - const: pull-enable
+          - const: mux
+          - const: ds
+
+      gpio-line-names:
+        maxItems: 85
+
+unevaluatedProperties:
+  type: object
+  $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+  - |
+    periphs_pinctrl: pinctrl {
+      compatible = "amlogic,meson-g12a-periphs-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bank@40 {
+        reg = <0x40  0x4c>,
+              <0xe8  0x18>,
+              <0x120 0x18>,
+              <0x2c0 0x40>,
+              <0x340 0x1c>;
+        reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&periphs_pinctrl 0 0 86>;
+      };
+
+      cec_ao_a_h_pins: cec_ao_a_h {
+        mux {
+          groups = "cec_ao_a_h";
+          function = "cec_ao_a_h";
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
new file mode 100644
index 0000000000..c1b03147e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-aobus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8 AOBUS pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson8-aobus-pinctrl
+          - amlogic,meson8b-aobus-pinctrl
+          - amlogic,meson-gxbb-aobus-pinctrl
+          - amlogic,meson-gxl-aobus-pinctrl
+          - amlogic,meson-axg-aobus-pinctrl
+      - items:
+          - const: amlogic,meson8m2-aobus-pinctrl
+          - const: amlogic,meson8-aobus-pinctrl
+
+required:
+  - compatible
+
+patternProperties:
+  "^bank@[0-9a-z]+$":
+    $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 3
+
+      reg-names:
+        items:
+          - const: mux
+          - const: pull
+          - const: gpio
+
+      gpio-line-names:
+        minItems: 11 # GXL
+        maxItems: 16 # Meson8
+
+unevaluatedProperties:
+  type: object
+  $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+  - |
+    pinctrl_aobus: pinctrl {
+      compatible = "amlogic,meson8-aobus-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bank@14 {
+        reg = <0x14 0x4>,
+              <0x2c 0x4>,
+              <0x24 0x8>;
+        reg-names = "mux", "pull", "gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl_aobus 0 0 16>;
+      };
+
+      cec_ao_a_h_pins: cec_ao_a_h {
+        mux {
+          groups = "cec_ao_a_h";
+          function = "cec_ao_a_h";
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
new file mode 100644
index 0000000000..4ec85b8248
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8 CBUS pinmux controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson8-cbus-pinctrl
+          - amlogic,meson8b-cbus-pinctrl
+          - amlogic,meson-gxbb-periphs-pinctrl
+          - amlogic,meson-gxl-periphs-pinctrl
+          - amlogic,meson-axg-periphs-pinctrl
+      - items:
+          - const: amlogic,meson8m2-cbus-pinctrl
+          - const: amlogic,meson8-cbus-pinctrl
+
+required:
+  - compatible
+
+patternProperties:
+  "^bank@[0-9a-z]+$":
+    $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 4
+
+      reg-names:
+        items:
+          - const: mux
+          - const: pull
+          - const: pull-enable
+          - const: gpio
+
+      gpio-line-names:
+        minItems: 86 # AXG
+        maxItems: 120 # Meson8
+
+unevaluatedProperties:
+  type: object
+  $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+  - |
+    pinctrl_cbus: pinctrl {
+      compatible = "amlogic,meson8-cbus-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bank@80b0 {
+        reg = <0x80b0 0x28>,
+              <0x80e8 0x18>,
+              <0x8120 0x18>,
+              <0x8030 0x30>;
+        reg-names = "mux", "pull", "pull-enable", "gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl_cbus 0 0 120>;
+      };
+
+      cec_ao_a_h_pins: cec_ao_a_h {
+        mux {
+          groups = "cec_ao_a_h";
+          function = "cec_ao_a_h";
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
new file mode 100644
index 0000000000..9c07935919
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple GPIO controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple GPIO controller is a simple combined pin and GPIO
+  controller present on Apple ARM SoC platforms, including various
+  iPhone and iPad devices and the "Apple Silicon" Macs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pinctrl
+          - apple,t8112-pinctrl
+          - apple,t6000-pinctrl
+      - const: apple,pinctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  apple,npins:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of pins in this GPIO controller.
+
+  interrupts:
+    description: One interrupt for each of the (up to 7) interrupt
+      groups supported by the controller sorted by interrupt group
+      number in ascending order.
+    minItems: 1
+    maxItems: 7
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      pinmux:
+        description:
+          Values are constructed from pin number and alternate function
+          configuration number using the APPLE_PINMUX() helper macro
+          defined in include/dt-bindings/pinctrl/apple.h.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - apple,npins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/pinctrl/apple.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pinctrl: pinctrl@23c100000 {
+        compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+        reg = <0x2 0x3c100000 0x0 0x100000>;
+        clocks = <&gpio_clk>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 212>;
+        apple,npins = <212>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>;
+
+        pcie_pins: pcie-pins {
+          pinmux = <APPLE_PINMUX(150, 1)>,
+                   <APPLE_PINMUX(151, 1)>,
+                   <APPLE_PINMUX(32, 1)>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
new file mode 100644
index 0000000000..37c0a74c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2400-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2400 Pin Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+
+  - compatible:     Should be one of the following:
+                    "aspeed,ast2400-scu", "syscon", "simple-mfd"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: aspeed,ast2400-pinctrl
+  reg:
+    maxItems: 2
+
+additionalProperties:
+  $ref: pinmux-node.yaml#
+  additionalProperties: false
+
+  properties:
+    pins: true
+    bias-disable: true
+
+  patternProperties:
+    "^function|groups$":
+      enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+              EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+              GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+              I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+              MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+              NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+              NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+              PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+              RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+              RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+              SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+              SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+              TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+              VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+examples:
+  - |
+    syscon: scu@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        pinctrl: pinctrl {
+            compatible = "aspeed,ast2400-pinctrl";
+
+            pinctrl_i2c3_default: i2c3_default {
+                function = "I2C3";
+                groups = "I2C3";
+            };
+
+            pinctrl_gpioh0_unbiased_default: gpioh0 {
+                pins = "A8";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
new file mode 100644
index 0000000000..863da5d808
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2500 Pin Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+
+  - compatible: 	Should be one of the following:
+  			"aspeed,ast2500-scu", "syscon", "simple-mfd"
+  			"aspeed,g5-scu", "syscon", "simple-mfd"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: aspeed,ast2500-pinctrl
+  reg:
+    maxItems: 2
+
+  aspeed,external-nodes:
+    minItems: 2
+    maxItems: 2
+    items:
+      maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      A cell of phandles to external controller nodes:
+      0: compatible with "aspeed,ast2500-gfx", "syscon"
+      1: compatible with "aspeed,ast2500-lhc", "syscon"
+
+additionalProperties:
+  $ref: pinmux-node.yaml#
+  additionalProperties: false
+
+  properties:
+    pins: true
+    bias-disable: true
+
+  patternProperties:
+    "^function|groups$":
+      enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+              ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+              GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+              I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+              LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+              MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+              NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+              PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+              RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+              SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+              SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+              SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+              TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+              USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+              VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - aspeed,external-nodes
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    scu@1e6e2000 {
+        compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        pinctrl: pinctrl {
+            compatible = "aspeed,ast2500-pinctrl";
+            aspeed,external-nodes = <&gfx>, <&lhc>;
+
+            pinctrl_i2c3_default: i2c3_default {
+                function = "I2C3";
+                groups = "I2C3";
+            };
+
+            pinctrl_gpioh0_unbiased_default: gpioh0 {
+                pins = "A18";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
new file mode 100644
index 0000000000..612464aef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 Pin Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+  The pin controller node should be the child of a syscon node with the
+  required property:
+
+  - compatible: Should be one of the following:
+                "aspeed,ast2600-scu", "syscon", "simple-mfd"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: aspeed,ast2600-pinctrl
+
+additionalProperties:
+  $ref: pinmux-node.yaml#
+  additionalProperties: false
+
+  properties:
+    function:
+      enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+              ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+              FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+              GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+              GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+              I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+              I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+              NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+              NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+              NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+              PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+              PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+              RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+              SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+              SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+              TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+              THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+              UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+              USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
+
+    groups:
+      enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+              ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+              EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
+              GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+              I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+              I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+              MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+              NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+              PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+              PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+              RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+              SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+              SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+              SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2,
+              SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+              TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+              TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+              UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+              WDTRST3, WDTRST4]
+
+    pins: true
+    bias-disable: true
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+examples:
+  - |
+    syscon: scu@1e6e2000 {
+        compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0xf6c>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        pinctrl: pinctrl {
+            compatible = "aspeed,ast2600-pinctrl";
+
+            pinctrl_pwm10g1_default: pwm10g1_default {
+                function = "PWM10";
+                groups = "PWM10G1";
+            };
+
+            pinctrl_gpioh0_unbiased_default: gpioh0 {
+                pins = "A18";
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
new file mode 100644
index 0000000000..e8abbdad7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -0,0 +1,176 @@
+* Atmel AT91 Pinmux Controller
+
+The AT91 Pinmux Controller, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called periph modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the controller controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Atmel AT91 pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'pins' selects the function mode(also named pin
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, multi drive, etc.
+
+Required properties for iomux controller:
+- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
+		or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
+- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
+  configured in this periph mode. All the periph and bank need to be describe.
+
+How to create such array:
+
+Each column will represent the possible peripheral of the pinctrl
+Each line will represent a pio bank
+
+Take an example on the 9260
+Peripheral: 2 ( A and B)
+Bank: 3 (A, B and C)
+=>
+
+  /*    A         B     */
+  0xffffffff 0xffc00c3b  /* pioA */
+  0xffffffff 0x7fff3ccf  /* pioB */
+  0xffffffff 0x007fffff  /* pioC */
+
+For each peripheral/bank we will describe in a u32 if a pin can be
+configured in it by putting 1 to the pin bit (1 << pin)
+
+Let's take the pioA on peripheral B
+From the datasheet Table 10-2.
+Peripheral B
+PA0	MCDB0
+PA1	MCCDB
+PA2
+PA3	MCDB3
+PA4	MCDB2
+PA5	MCDB1
+PA6
+PA7
+PA8
+PA9
+PA10	ETX2
+PA11	ETX3
+PA12
+PA13
+PA14
+PA15
+PA16
+PA17
+PA18
+PA19
+PA20
+PA21
+PA22	ETXER
+PA23	ETX2
+PA24	ETX3
+PA25	ERX2
+PA26	ERX3
+PA27	ERXCK
+PA28	ECRS
+PA29	ECOL
+PA30	RXD4
+PA31	TXD4
+
+=> 0xffc00c3b
+
+Required properties for pin configuration node:
+- atmel,pins: 4 integers array, represents a group of pins mux and config
+  setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+
+Bits used for CONFIG:
+PULL_UP		(1 << 0): indicate this pin needs a pull up.
+MULTIDRIVE	(1 << 1): indicate this pin needs to be configured as multi-drive.
+			Multi-drive is equivalent to open-drain type output.
+DEGLITCH	(1 << 2): indicate this pin needs deglitch.
+PULL_DOWN	(1 << 3): indicate this pin needs a pull down.
+DIS_SCHMIT	(1 << 4): indicate this pin needs to the disable schmitt trigger.
+DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
+			following values:
+				00 - No change (reset state value kept)
+				01 - Low
+				10 - Medium
+				11 - High
+OUTPUT		(1 << 7): indicate this pin need to be configured as an output.
+OUTPUT_VAL	(1 << 8): output val (1 = high, 0 = low)
+SLEWRATE	(1 << 9): slew rate of the pin: 0 = disable, 1 = enable
+DEBOUNCE	(1 << 16): indicate this pin needs debounce.
+DEBOUNCE_VAL	(0x3fff << 17): debounce value.
+
+NOTE:
+Some requirements for using atmel,at91rm9200-pinctrl binding:
+1. We have pin function node defined under at91 controller node to represent
+   what pinmux functions this SoC supports.
+2. The driver can use the function node's name and pin configuration node's
+   name describe the pin function and group hierarchy.
+   For example, Linux at91 pinctrl driver takes the function node's name
+   as the function name and pin configuration node's name as group name to
+   create the map table.
+3. Each pin configuration node should have a phandle, devices can set pins
+   configurations by referring to the phandle of that pin configuration node.
+4. The gpio controller must be describe in the pinctrl simple-bus.
+
+For each bank the required properties are:
+- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
+  "microchip,sam9x60-gpio"
+- reg: physical base address and length of the controller's registers
+- interrupts: interrupt outputs from the controller
+- interrupt-controller: marks the device node as an interrupt controller
+- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt
+  for more details.
+- gpio-controller
+- #gpio-cells: should be 2; the first cell is the GPIO number and the second
+  cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>.
+- clocks: bank clock
+
+Examples:
+
+pinctrl@fffff400 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+	reg = <0xfffff400 0x600>;
+
+	pioA: gpio@fffff400 {
+		compatible = "atmel,at91sam9x5-gpio";
+		reg = <0xfffff400 0x200>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+	};
+
+	atmel,mux-mask = <
+	      /*    A         B     */
+	       0xffffffff 0xffc00c3b  /* pioA */
+	       0xffffffff 0x7fff3ccf  /* pioB */
+	       0xffffffff 0x007fffff  /* pioC */
+	      >;
+
+	/* shared pinctrl settings */
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins =
+				<1 14 0x1 0x0	/* PB14 periph A */
+				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
+		};
+	};
+};
+
+dbgu: serial@fffff200 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xfffff200 0x200>;
+	interrupts = <1 4 7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
new file mode 100644
index 0000000000..774c3c269c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -0,0 +1,98 @@
+* Atmel PIO4 Controller
+
+The Atmel PIO4 controller is used to select the function of a pin and to
+configure it.
+
+Required properties:
+- compatible:
+	"atmel,sama5d2-pinctrl"
+	"microchip,sama7g5-pinctrl"
+- reg: base address and length of the PIO controller.
+- interrupts: interrupt outputs from the controller, one for each bank.
+- interrupt-controller: mark the device node as an interrupt controller.
+- #interrupt-cells: should be two.
+- gpio-controller: mark the device node as a gpio controller.
+- #gpio-cells: should be two.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+Each node (or subnode) will list the pins it needs and how to configured these
+pins.
+
+	node {
+		pinmux = <PIN_NUMBER_PINMUX>;
+		GENERIC_PINCONFIG;
+	};
+
+Required properties:
+- pinmux: integer array. Each integer represents a pin number plus mux and
+ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
+right representation of the pin.
+
+Optional properties:
+- GENERIC_PINCONFIG: generic pinconfig options to use:
+	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+	 drive-push-pull input-schmitt-enable, input-debounce, output-low,
+	 output-high.
+	- for microchip,sama7g5-pinctrl only:
+		- slew-rate: 0 - disabled, 1 - enabled (default)
+- atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
+high drive. The default value is low drive.
+
+Example:
+
+#include <sama5d2-pinfunc.h>
+
+...
+{
+	pioA: pinctrl@fc038000 {
+		compatible = "atmel,sama5d2-pinctrl";
+		reg = <0xfc038000 0x600>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+			     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+			     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+			     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		clocks = <&pioA_clk>;
+
+		pinctrl_i2c0_default: i2c0_default {
+			pinmux = <PIN_PD21__TWD0>,
+				 <PIN_PD22__TWCK0>;
+			bias-disable;
+		};
+
+		pinctrl_led_gpio_default: led_gpio_default {
+			pinmux = <PIN_PB0>,
+				 <PIN_PB5>;
+			bias-pull-up;
+			atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+		};
+
+		pinctrl_sdmmc1_default: sdmmc1_default {
+			cmd_data {
+				pinmux = <PIN_PA28__SDMMC1_CMD>,
+					 <PIN_PA18__SDMMC1_DAT0>,
+					 <PIN_PA19__SDMMC1_DAT1>,
+					 <PIN_PA20__SDMMC1_DAT2>,
+					 <PIN_PA21__SDMMC1_DAT3>;
+				bias-pull-up;
+			};
+
+			ck_cd {
+				pinmux = <PIN_PA22__SDMMC1_CK>,
+					 <PIN_PA30__SDMMC1_CD>;
+				bias-disable;
+			};
+		};
+		...
+	};
+};
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
new file mode 100644
index 0000000000..678f509705
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
@@ -0,0 +1,87 @@
+Axis ARTPEC-6 Pin Controller
+
+Required properties:
+- compatible: "axis,artpec6-pinctrl".
+- reg: Should contain the register physical address and length for the pin
+       controller.
+
+A pinctrl node should contain at least one subnode representing the pinctrl
+groups available on the machine. Each subnode will list the mux function
+required and what pin group it will use. Each subnode will also configure the
+drive strength and bias pullup of the pin group. If either of these options is
+not set, its actual value will be unspecified.
+
+
+Required subnode-properties:
+- function: Function to mux.
+- groups: Name of the pin group to use for the function above.
+
+	Available functions and groups (function: group0, group1...):
+		gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0,
+		      i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0,
+		      spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart0grp2,
+		      uart1grp0, uart1grp1, uart2grp0, uart2grp1, uart2grp2,
+		      uart3grp0, uart4grp0, uart4grp1, uart5grp0, uart5grp1,
+		      uart5nocts
+		cpuclkout: cpuclkoutgrp0
+		udlclkout: udlclkoutgrp0
+		i2c1: i2c1grp0
+		i2c2: i2c2grp0
+		i2c3: i2c3grp0
+		i2s0: i2s0grp0
+		i2s1: i2s1grp0
+		i2srefclk: i2srefclkgrp0
+		spi0: spi0grp0
+		spi1: spi1grp0
+		pciedebug: pciedebuggrp0
+		uart0: uart0grp0, uart0grp1, uart0grp2
+		uart1: uart1grp0, uart1grp1
+		uart2: uart2grp0, uart2grp1, uart2grp2
+		uart3: uart3grp0
+		uart4: uart4grp0, uart4grp1
+		uart5: uart5grp0, uart5grp1, uart5nocts
+		nand: nandgrp0
+		sdio0: sdio0grp0
+		sdio1: sdio1grp0
+		ethernet: ethernetgrp0
+
+
+Optional subnode-properties (see pinctrl-bindings.txt):
+- drive-strength: 4, 6, 8, 9 mA.  For SD and NAND pins, this is for 3.3V VCCQ3.
+- bias-pull-up
+- bias-disable
+
+Examples:
+pinctrl@f801d000 {
+	compatible = "axis,artpec6-pinctrl";
+	reg = <0xf801d000 0x400>;
+
+	pinctrl_uart0: uart0grp {
+		function = "uart0";
+		groups = "uart0grp0";
+		drive-strength = <4>;
+		bias-pull-up;
+	};
+	pinctrl_uart3: uart3grp {
+		function = "uart3";
+		groups = "uart3grp0";
+	};
+};
+uart0: uart@f8036000 {
+	compatible = "arm,pl011", "arm,primecell";
+	reg = <0xf8036000 0x1000>;
+	interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pll2div24>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+uart3: uart@f8039000 {
+	compatible = "arm,pl011", "arm,primecell";
+	reg = <0xf8039000 0x1000>;
+	interrupts = <0 128 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pll2div24>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt
new file mode 100644
index 0000000000..0a2d5516e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt
@@ -0,0 +1,47 @@
+* Pin-controller driver for the Marvell Berlin SoCs
+
+Pin control registers are part of both chip controller and system
+controller register sets. Pin controller nodes should be a sub-node of
+either the chip controller or system controller node. The pins
+controlled are organized in groups, so no actual pin information is
+needed.
+
+A pin-controller node should contain subnodes representing the pin group
+configurations, one per function. Each subnode has the group name and
+the muxing function used.
+
+Be aware the Marvell Berlin datasheets use the keyword 'mode' for what
+is called a 'function' in the pin-controller subsystem.
+
+Required properties:
+- compatible: should be one of:
+	"marvell,berlin2-soc-pinctrl",
+	"marvell,berlin2-system-pinctrl",
+	"marvell,berlin2cd-soc-pinctrl",
+	"marvell,berlin2cd-system-pinctrl",
+	"marvell,berlin2q-soc-pinctrl",
+	"marvell,berlin2q-system-pinctrl",
+	"marvell,berlin4ct-avio-pinctrl",
+	"marvell,berlin4ct-soc-pinctrl",
+	"marvell,berlin4ct-system-pinctrl",
+	"syna,as370-soc-pinctrl"
+
+Required subnode-properties:
+- groups: a list of strings describing the group names.
+- function: a string describing the function used to mux the groups.
+
+Example:
+
+sys_pinctrl: pin-controller {
+	compatible = "marvell,berlin2q-system-pinctrl";
+
+	uart0_pmux: uart0-pmux {
+		groups = "GSM12";
+		function = "uart0";
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pmux>;
+	pinctrl-names = "default";
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
new file mode 100644
index 0000000000..4980776122
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
@@ -0,0 +1,126 @@
+Bitmain BM1880 Pin Controller
+
+This binding describes the pin controller found in the BM1880 SoC.
+
+Required Properties:
+
+- compatible:   Should be "bitmain,bm1880-pinctrl"
+- reg:          Offset and length of pinctrl space in SCTRL.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration for BM1880 SoC
+includes pinmux and various pin configuration parameters, such as pull-up,
+slew rate etc...
+
+Each configuration node can consist of multiple nodes describing the pinmux
+options. The name of each subnode is not important; all subnodes should be
+enumerated and processed purely based on their content.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+
+Required Properties:
+
+- pins:           An array of strings, each string containing the name of a pin.
+                  Valid values for pins are:
+
+                  MIO0 - MIO111
+
+- groups:         An array of strings, each string containing the name of a pin
+                  group. Valid values for groups are:
+
+                  nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp,
+                  pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp,
+                  pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp,
+                  pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp,
+                  pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp,
+                  pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp,
+                  pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp,
+                  pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp,
+                  i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp,
+                  uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp,
+                  uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp,
+                  uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp,
+                  gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp,
+                  gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp,
+                  gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp,
+                  gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp,
+                  gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp,
+                  gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp,
+                  gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp,
+                  gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp,
+                  gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp,
+                  gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp,
+                  gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp,
+                  gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp,
+                  gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp,
+                  gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp,
+                  i2s1_grp, i2s1_mclkin_grp, spi0_grp
+
+- function:       An array of strings, each string containing the name of the
+                  pinmux functions. The following are the list of pinmux
+                  functions available:
+
+                  nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
+                  pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13,
+                  pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22,
+                  pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31,
+                  pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3,
+                  i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7,
+                  uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15,
+                  gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8,
+                  gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16,
+                  gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
+                  gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+                  gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+                  gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44,
+                  gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51,
+                  gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58,
+                  gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65,
+                  gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin,
+                  spi0
+
+Optional Properties:
+
+- bias-disable:  No arguments. Disable pin bias.
+- bias-pull-down: No arguments. The specified pins should be configured as
+                  pull down.
+- bias-pull-up:   No arguments. The specified pins should be configured as
+                  pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+                  pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+                  pins
+- slew-rate:      Integer. Sets slew rate for the specified pins.
+                  Valid values are:
+                  <0>  - Slow
+                  <1>  - Fast
+- drive-strength: Integer. Selects the drive strength for the specified
+                  pins in mA.
+                  Valid values are:
+                  <4>
+                  <8>
+                  <12>
+                  <16>
+                  <20>
+                  <24>
+                  <28>
+                  <32>
+
+Example:
+        pinctrl: pinctrl@400 {
+                compatible = "bitmain,bm1880-pinctrl";
+                reg = <0x400 0x120>;
+
+                pinctrl_uart0_default: uart0-default {
+                        pinmux {
+                                groups = "uart0_grp";
+                                function = "uart0";
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml
new file mode 100644
index 0000000000..90c2752951
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM281xx pin controller
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm11351-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-grp[0-9]$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          pins:
+            description:
+              Specifies the name(s) of one or more pins to be configured by
+              this node.
+            items:
+              enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda,
+                      classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2,
+                      clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1,
+                      cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq,
+                      digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00,
+                      gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
+                      gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14,
+                      gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp,
+                      kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
+                      kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
+                      lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
+                      lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
+                      lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe,
+                      lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4,
+                      lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1,
+                      mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6,
+                      mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2,
+                      mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6,
+                      mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10,
+                      mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14,
+                      mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n,
+                      mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1,
+                      mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1,
+                      nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
+                      nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle,
+                      nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1,
+                      pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g,
+                      rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1,
+                      rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
+                      rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
+                      rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0,
+                      rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3,
+                      rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1,
+                      rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
+                      rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
+                      rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
+                      sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
+                      sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
+                      sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3,
+                      sim_clk, sim_data, sim_det, sim_resetn, sim2_clk,
+                      sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e,
+                      ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd,
+                      ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
+                      ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk,
+                      ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd,
+                      ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk,
+                      ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken,
+                      traceclk, tracedt00, tracedt01, tracedt02, tracedt03,
+                      tracedt04, tracedt05, tracedt06, tracedt07, tracedt08
+                      tracedt09, tracedt10, tracedt11, tracedt12, tracedt13
+                      tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts,
+                      uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd,
+                      uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd,
+                      uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd,
+                      uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
+                      vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
+
+          function:
+            description:
+              Specifies the pin mux selection.
+            enum: [ alt1, alt2, alt3, alt4 ]
+
+          slew-rate:
+            description: |
+              Meaning depends on configured pin mux:
+                *_scl or *_sda:
+                  0: Standard (100 kbps) & Fast (400 kbps) mode
+                  1: Highspeed (3.4 Mbps) mode
+                ic_dm or ic_dp:
+                  0: normal slew rate
+                  1: fast slew rate
+                Otherwise:
+                  0: fast slew rate
+                  1: normal slew rate
+
+          bias-disable: true
+          input-disable: true
+          input-enable: true
+
+        required:
+          - pins
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+
+          # Optional properties for standard pins
+          - if:
+              properties:
+                pins:
+                  contains:
+                    enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0,
+                            clkout_1, clkout_2, clkout_3, clkreq_in_0,
+                            clkreq_in_1, cws_sys_req1, cws_sys_req2,
+                            cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk,
+                            digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01,
+                            gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
+                            gpio08, gpio09, gpio10, gpio11, gpio12, gpio13,
+                            gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp,
+                            kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
+                            kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
+                            lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
+                            lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
+                            lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync,
+                            lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2,
+                            lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7,
+                            lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3,
+                            mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8,
+                            mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3,
+                            mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7,
+                            mphi_data_8, mphi_data_9, mphi_data_10,
+                            mphi_data_11, mphi_data_12, mphi_data_13,
+                            mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0,
+                            mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n,
+                            mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk,
+                            mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2,
+                            nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
+                            nand_ad_7, nand_ale, nand_cen_0, nand_cen_1,
+                            nand_cle, nand_oen, nand_rdy_0, nand_rdy_1,
+                            nand_wen, nand_wp, pc1, pc2, pmu_int,
+                            rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc,
+                            rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2,
+                            rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
+                            rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
+                            rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc,
+                            rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2,
+                            rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc,
+                            rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2,
+                            rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
+                            rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
+                            rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
+                            sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
+                            sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
+                            sdio4_data_0, sdio4_data_1, sdio4_data_2,
+                            sdio4_data_3, sim_clk, sim_data, sim_det,
+                            sim_resetn, sim2_clk, sim2_data, sim2_det,
+                            sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk,
+                            ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk,
+                            ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
+                            ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1,
+                            ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk,
+                            ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs,
+                            ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd,
+                            ssp6_txd, stat_1, stat_2, sysclken, traceclk,
+                            tracedt00, tracedt01, tracedt02, tracedt03,
+                            tracedt04, tracedt05, tracedt06, tracedt07,
+                            tracedt08, tracedt09, tracedt10, tracedt11,
+                            tracedt12, tracedt13, tracedt14, tracedt15,
+                            txdata3g0, txpwrind, uartb1_ucts, uartb1_urts,
+                            uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd,
+                            uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd,
+                            uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ]
+            then:
+              properties:
+                drive-strength:
+                  enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]
+
+                bias-disable: true
+                bias-pull-up: true
+                bias-pull-down: true
+                input-schmitt-enable: true
+                input-schmitt-disable: true
+
+          # Optional properties for I2C pins
+          - if:
+              properties:
+                pins:
+                  contains:
+                    enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl,
+                            pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
+                            vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
+            then:
+              properties:
+                bias-pull-up:
+                  description:
+                    There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available
+                    in parallel for I2C pins.
+                  enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ]
+
+                bias-disable: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@35004800 {
+      compatible = "brcm,bcm11351-pinctrl";
+      reg = <0x35004800 0x430>;
+
+      dev-a-active-pins {
+        /* group node defining 1 standard pin */
+        std-grp0 {
+          pins = "gpio00";
+          function = "alt1";
+          input-schmitt-enable;
+          bias-disable;
+          slew-rate = <1>;
+          drive-strength = <4>;
+        };
+
+        /* group node defining 2 I2C pins */
+        i2c-grp0 {
+          pins = "bsc1_scl", "bsc1_sda";
+          function = "alt2";
+          bias-pull-up = <720>;
+          input-enable;
+        };
+
+        /* group node defining 2 HDMI pins */
+        hdmi-grp0 {
+          pins = "hdmi_scl", "hdmi_sda";
+          function = "alt3";
+          slew-rate = <1>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
new file mode 100644
index 0000000000..5682b2010e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -0,0 +1,99 @@
+Broadcom BCM2835 GPIO (and pinmux) controller
+
+The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt
+controller, and pinmux/control device.
+
+Required properties:
+- compatible: "brcm,bcm2835-gpio"
+- compatible: should be one of:
+  "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
+  "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
+  "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
+  "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
+- reg: Should contain the physical address of the GPIO module's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+  - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- interrupts : The interrupt outputs from the controller. One interrupt per
+  individual bank followed by the "all banks" interrupt. For BCM7211, an
+  additional set of per-bank interrupt line and an "all banks" wake-up
+  interrupt may be specified.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2.
+  The first cell is the GPIO number.
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+    Valid combinations are 1, 2, 3, 4, 8.
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux function to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pul parameter implies no information about the mux function.
+
+The BCM2835 pin configuration and multiplexing supports the generic bindings.
+For details on each properties, you can refer to ./pinctrl-bindings.txt.
+
+Required sub-node properties:
+  - pins
+  - function
+
+Optional sub-node properties:
+  - bias-disable
+  - bias-pull-up
+  - bias-pull-down
+  - output-high
+  - output-low
+
+Legacy pin configuration and multiplexing binding:
+*** (Its use is deprecated, use generic multiplexing and configuration
+bindings instead)
+
+Required subnode-properties:
+- brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs
+  are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53.
+
+Optional subnode-properties:
+- brcm,function: Integer, containing the function to mux to the pin(s):
+  0: GPIO in
+  1: GPIO out
+  2: alt5
+  3: alt4
+  4: alt0
+  5: alt1
+  6: alt2
+  7: alt3
+- brcm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+  0: none
+  1: down
+  2: up
+
+Each of brcm,function and brcm,pull may contain either a single value which
+will be applied to all pins in brcm,pins, or 1 value for each entry in
+brcm,pins.
+
+Example:
+
+	gpio: gpio {
+		compatible = "brcm,bcm2835-gpio";
+		reg = <0x2200000 0xb4>;
+		interrupts = <2 17>, <2 19>, <2 18>, <2 20>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
new file mode 100644
index 0000000000..8a9fb9b433
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 pin controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Binding for pin controller present on BCM4908 family SoCs.
+
+properties:
+  compatible:
+    const: brcm,bcm4908-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      function:
+        enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
+                led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
+                led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
+                led_25, led_26, led_27, led_28, led_29, led_30, led_31,
+                hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
+                usb1_pwr ]
+
+      groups:
+        minItems: 1
+        maxItems: 2
+        items:
+          enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
+                  led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
+                  led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
+                  led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
+                  led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
+                  led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
+                  led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
+                  led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
+                  led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
+                  led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
+                  nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
+                  usb1_pwr_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@ff800560 {
+        compatible = "brcm,bcm4908-pinctrl";
+        reg = <0xff800560 0x10>;
+
+        led_0-a-pins {
+            function = "led_0";
+            groups = "led_0_grp_a";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 0000000000..4478a76171
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6318 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6318-pinctrl
+
+  reg:
+    maxItems: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+                ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+                serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+                dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+                usb_device_led, usb_active ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6318-pinctrl";
+      reg = <0x18 0x10>, <0x54 0x18>;
+
+      pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+        function = "ephy0_spd_led";
+        pins = "gpio0";
+      };
+
+      pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+        function = "ephy1_spd_led";
+        pins = "gpio1";
+      };
+
+      pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+        function = "ephy2_spd_led";
+        pins = "gpio2";
+      };
+
+      pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+        function = "ephy3_spd_led";
+        pins = "gpio3";
+      };
+
+      pinctrl_ephy0_act_led: ephy0_act_led-pins {
+        function = "ephy0_act_led";
+        pins = "gpio4";
+      };
+
+      pinctrl_ephy1_act_led: ephy1_act_led-pins {
+        function = "ephy1_act_led";
+        pins = "gpio5";
+      };
+
+      pinctrl_ephy2_act_led: ephy2_act_led-pins {
+        function = "ephy2_act_led";
+        pins = "gpio6";
+      };
+
+      pinctrl_ephy3_act_led: ephy3_act_led-pins {
+        function = "ephy3_act_led";
+        pins = "gpio7";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio6";
+        };
+
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio7";
+        };
+      };
+
+      pinctrl_inet_act_led: inet_act_led-pins {
+        function = "inet_act_led";
+        pins = "gpio8";
+      };
+
+      pinctrl_inet_fail_led: inet_fail_led-pins {
+        function = "inet_fail_led";
+        pins = "gpio9";
+      };
+
+      pinctrl_dsl_led: dsl_led-pins {
+        function = "dsl_led";
+        pins = "gpio10";
+      };
+
+      pinctrl_post_fail_led: post_fail_led-pins {
+        function = "post_fail_led";
+        pins = "gpio11";
+      };
+
+      pinctrl_wlan_wps_led: wlan_wps_led-pins {
+        function = "wlan_wps_led";
+        pins = "gpio12";
+      };
+
+      pinctrl_usb_pwron: usb_pwron-pins {
+        function = "usb_pwron";
+        pins = "gpio13";
+      };
+
+      pinctrl_usb_device_led: usb_device_led-pins {
+        function = "usb_device_led";
+        pins = "gpio13";
+      };
+
+      pinctrl_usb_active: usb_active-pins {
+        function = "usb_active";
+        pins = "gpio40";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
new file mode 100644
index 0000000000..73e1caa7c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM63268 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm63268-pinctrl
+
+  reg:
+    maxItems: 3
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
+                hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
+                vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
+                nand, gpio35_alt, dectpd, vdsl_phy_override_0,
+                vdsl_phy_override_1, vdsl_phy_override_2,
+                vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
+                gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
+                dectpd_grp, vdsl_phy_override_0_grp,
+                vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
+                vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@10 {
+      compatible = "brcm,bcm63268-pinctrl";
+      reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio0";
+        };
+
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio1";
+        };
+      };
+
+      pinctrl_hsspi_cs4: hsspi_cs4-pins {
+        function = "hsspi_cs4";
+        pins = "gpio16";
+      };
+
+      pinctrl_hsspi_cs5: hsspi_cs5-pins {
+        function = "hsspi_cs5";
+        pins = "gpio17";
+      };
+
+      pinctrl_hsspi_cs6: hsspi_cs6-pins {
+        function = "hsspi_cs6";
+        pins = "gpio8";
+      };
+
+      pinctrl_hsspi_cs7: hsspi_cs7-pins {
+        function = "hsspi_cs7";
+        pins = "gpio9";
+      };
+
+      pinctrl_adsl_spi: adsl_spi-pins {
+        pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+          function = "adsl_spi_miso";
+          pins = "gpio18";
+        };
+
+        pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+          function = "adsl_spi_mosi";
+          pins = "gpio19";
+        };
+      };
+
+      pinctrl_vreq_clk: vreq_clk-pins {
+        function = "vreq_clk";
+        pins = "gpio22";
+      };
+
+      pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
+        function = "pcie_clkreq_b";
+        pins = "gpio23";
+      };
+
+      pinctrl_robosw_led_clk: robosw_led_clk-pins {
+        function = "robosw_led_clk";
+        pins = "gpio30";
+      };
+
+      pinctrl_robosw_led_data: robosw_led_data-pins {
+        function = "robosw_led_data";
+        pins = "gpio31";
+      };
+
+      pinctrl_nand: nand-pins {
+        function = "nand";
+        group = "nand_grp";
+      };
+
+      pinctrl_gpio35_alt: gpio35_alt-pins {
+        function = "gpio35_alt";
+        pin = "gpio35";
+      };
+
+      pinctrl_dectpd: dectpd-pins {
+        function = "dectpd";
+        group = "dectpd_grp";
+      };
+
+      pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
+        function = "vdsl_phy_override_0";
+        group = "vdsl_phy_override_0_grp";
+      };
+
+      pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
+        function = "vdsl_phy_override_1";
+        group = "vdsl_phy_override_1_grp";
+      };
+
+      pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
+        function = "vdsl_phy_override_2";
+        group = "vdsl_phy_override_2_grp";
+      };
+
+      pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
+        function = "vdsl_phy_override_3";
+        group = "vdsl_phy_override_3_grp";
+      };
+
+      pinctrl_dsl_gpio8: dsl_gpio8-pins {
+        function = "dsl_gpio8";
+        group = "dsl_gpio8";
+      };
+
+      pinctrl_dsl_gpio9: dsl_gpio9-pins {
+        function = "dsl_gpio9";
+        group = "dsl_gpio9";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
new file mode 100644
index 0000000000..2750ba42ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6328 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
+                led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
+                ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
+
+      pins:
+        enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
+                gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
+                usb_port1 ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6328-pinctrl";
+      reg = <0x18 0x10>;
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio6";
+        };
+
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio7";
+        };
+      };
+
+      pinctrl_inet_act_led: inet_act_led-pins {
+        function = "inet_act_led";
+        pins = "gpio11";
+      };
+
+      pinctrl_pcie_clkreq: pcie_clkreq-pins {
+        function = "pcie_clkreq";
+        pins = "gpio16";
+      };
+
+      pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+        function = "led";
+        pins = "gpio17";
+      };
+
+      pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+        function = "led";
+        pins = "gpio18";
+      };
+
+      pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+        function = "led";
+        pins = "gpio19";
+      };
+
+      pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+        function = "led";
+        pins = "gpio20";
+      };
+
+      pinctrl_ephy0_act_led: ephy0_act_led-pins {
+        function = "ephy0_act_led";
+        pins = "gpio25";
+      };
+
+      pinctrl_ephy1_act_led: ephy1_act_led-pins {
+        function = "ephy1_act_led";
+        pins = "gpio26";
+      };
+
+      pinctrl_ephy2_act_led: ephy2_act_led-pins {
+        function = "ephy2_act_led";
+        pins = "gpio27";
+      };
+
+      pinctrl_ephy3_act_led: ephy3_act_led-pins {
+        function = "ephy3_act_led";
+        pins = "gpio28";
+      };
+
+      pinctrl_hsspi_cs1: hsspi_cs1-pins {
+        function = "hsspi_cs1";
+        pins = "hsspi_cs1";
+      };
+
+      pinctrl_usb_port1_device: usb_port1_device-pins {
+        function = "usb_device_port";
+        pins = "usb_port1";
+      };
+
+      pinctrl_usb_port1_host: usb_port1_host-pins {
+        function = "usb_host_port";
+        pins = "usb_port1";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
new file mode 100644
index 0000000000..2f6c540498
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6358 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6358-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
+                pwm_syn_clk, sys_irq ]
+
+      pins:
+        enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
+                led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6358-pinctrl";
+      reg = <0x18 0x4>;
+
+      pinctrl_ebi_cs: ebi_cs-pins {
+        function = "ebi_cs";
+        groups = "ebi_cs_grp";
+      };
+
+      pinctrl_uart1: uart1-pins {
+        function = "uart1";
+        groups = "uart1_grp";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        function = "serial_led";
+        groups = "serial_led_grp";
+      };
+
+      pinctrl_legacy_led: legacy_led-pins {
+        function = "legacy_led";
+        groups = "legacy_led_grp";
+      };
+
+      pinctrl_led: led-pins {
+        function = "led";
+        groups = "led_grp";
+      };
+
+      pinctrl_spi_cs_23: spi_cs-pins {
+        function = "spi_cs";
+        groups = "spi_cs_grp";
+      };
+
+      pinctrl_utopia: utopia-pins {
+        function = "utopia";
+        groups = "utopia_grp";
+      };
+
+      pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
+        function = "pwm_syn_clk";
+        groups = "pwm_syn_clk_grp";
+      };
+
+      pinctrl_sys_irq: sys_irq-pins {
+        function = "sys_irq";
+        groups = "sys_irq_grp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
new file mode 100644
index 0000000000..b3044f8057
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6362 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6362-pinctrl
+
+  reg:
+    maxItems: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
+                robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
+                inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
+                uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
+                adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
+                ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
+                ext_irq2, ext_irq3, nand ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+                gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+                gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6362-pinctrl";
+      reg = <0x18 0x10>, <0x38 0x4>;
+
+      pinctrl_usb_device_led: usb_device_led-pins {
+        function = "usb_device_led";
+        pins = "gpio0";
+      };
+
+      pinctrl_sys_irq: sys_irq-pins {
+        function = "sys_irq";
+        pins = "gpio1";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio2";
+        };
+
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio3";
+        };
+      };
+
+      pinctrl_robosw_led_data: robosw_led_data-pins {
+        function = "robosw_led_data";
+        pins = "gpio4";
+      };
+
+      pinctrl_robosw_led_clk: robosw_led_clk-pins {
+        function = "robosw_led_clk";
+        pins = "gpio5";
+      };
+
+      pinctrl_robosw_led0: robosw_led0-pins {
+        function = "robosw_led0";
+        pins = "gpio6";
+      };
+
+      pinctrl_robosw_led1: robosw_led1-pins {
+        function = "robosw_led1";
+        pins = "gpio7";
+      };
+
+      pinctrl_inet_led: inet_led-pins {
+        function = "inet_led";
+        pins = "gpio8";
+      };
+
+      pinctrl_spi_cs2: spi_cs2-pins {
+        function = "spi_cs2";
+        pins = "gpio9";
+      };
+
+      pinctrl_spi_cs3: spi_cs3-pins {
+        function = "spi_cs3";
+        pins = "gpio10";
+      };
+
+      pinctrl_ntr_pulse: ntr_pulse-pins {
+        function = "ntr_pulse";
+        pins = "gpio11";
+      };
+
+      pinctrl_uart1_scts: uart1_scts-pins {
+        function = "uart1_scts";
+        pins = "gpio12";
+      };
+
+      pinctrl_uart1_srts: uart1_srts-pins {
+        function = "uart1_srts";
+        pins = "gpio13";
+      };
+
+      pinctrl_uart1: uart1-pins {
+        pinctrl_uart1_sdin: uart1_sdin-pins {
+          function = "uart1_sdin";
+          pins = "gpio14";
+        };
+
+        pinctrl_uart1_sdout: uart1_sdout-pins {
+          function = "uart1_sdout";
+          pins = "gpio15";
+        };
+      };
+
+      pinctrl_adsl_spi: adsl_spi-pins {
+        pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+          function = "adsl_spi_miso";
+          pins = "gpio16";
+        };
+
+        pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+          function = "adsl_spi_mosi";
+          pins = "gpio17";
+        };
+
+        pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
+          function = "adsl_spi_clk";
+          pins = "gpio18";
+        };
+
+        pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
+          function = "adsl_spi_cs";
+          pins = "gpio19";
+        };
+      };
+
+      pinctrl_ephy0_led: ephy0_led-pins {
+        function = "ephy0_led";
+        pins = "gpio20";
+      };
+
+      pinctrl_ephy1_led: ephy1_led-pins {
+        function = "ephy1_led";
+        pins = "gpio21";
+      };
+
+      pinctrl_ephy2_led: ephy2_led-pins {
+        function = "ephy2_led";
+        pins = "gpio22";
+      };
+
+      pinctrl_ephy3_led: ephy3_led-pins {
+        function = "ephy3_led";
+        pins = "gpio23";
+      };
+
+      pinctrl_ext_irq0: ext_irq0-pins {
+        function = "ext_irq0";
+        pins = "gpio24";
+      };
+
+      pinctrl_ext_irq1: ext_irq1-pins {
+        function = "ext_irq1";
+        pins = "gpio25";
+      };
+
+      pinctrl_ext_irq2: ext_irq2-pins {
+        function = "ext_irq2";
+        pins = "gpio26";
+      };
+
+      pinctrl_ext_irq3: ext_irq3-pins {
+        function = "ext_irq3";
+        pins = "gpio27";
+      };
+
+      pinctrl_nand: nand-pins {
+        function = "nand";
+        group = "nand_grp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
new file mode 100644
index 0000000000..3236871827
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 pin controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+  Bindings for Broadcom's BCM6368 memory-mapped pin controller.
+
+properties:
+  compatible:
+    const: brcm,bcm6368-pinctrl
+
+  reg:
+    maxItems: 2
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
+                serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
+                ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
+                robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
+                pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
+                pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
+                spi_cs5, uart1 ]
+
+      pins:
+        enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+                gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+                gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
+                gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+                gpio31, uart1_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@18 {
+      compatible = "brcm,bcm6368-pinctrl";
+      reg = <0x18 0x4>, <0x38 0x4>;
+
+      pinctrl_analog_afe_0: analog_afe_0-pins {
+        function = "analog_afe_0";
+        pins = "gpio0";
+      };
+
+      pinctrl_analog_afe_1: analog_afe_1-pins {
+        function = "analog_afe_1";
+        pins = "gpio1";
+      };
+
+      pinctrl_sys_irq: sys_irq-pins {
+        function = "sys_irq";
+        pins = "gpio2";
+      };
+
+      pinctrl_serial_led: serial_led-pins {
+        pinctrl_serial_led_data: serial_led_data-pins {
+          function = "serial_led_data";
+          pins = "gpio3";
+        };
+
+        pinctrl_serial_led_clk: serial_led_clk-pins {
+          function = "serial_led_clk";
+          pins = "gpio4";
+        };
+      };
+
+      pinctrl_inet_led: inet_led-pins {
+        function = "inet_led";
+        pins = "gpio5";
+      };
+
+      pinctrl_ephy0_led: ephy0_led-pins {
+        function = "ephy0_led";
+        pins = "gpio6";
+      };
+
+      pinctrl_ephy1_led: ephy1_led-pins {
+        function = "ephy1_led";
+        pins = "gpio7";
+      };
+
+      pinctrl_ephy2_led: ephy2_led-pins {
+        function = "ephy2_led";
+        pins = "gpio8";
+      };
+
+      pinctrl_ephy3_led: ephy3_led-pins {
+        function = "ephy3_led";
+        pins = "gpio9";
+      };
+
+      pinctrl_robosw_led_data: robosw_led_data-pins {
+        function = "robosw_led_data";
+        pins = "gpio10";
+      };
+
+      pinctrl_robosw_led_clk: robosw_led_clk-pins {
+        function = "robosw_led_clk";
+        pins = "gpio11";
+      };
+
+      pinctrl_robosw_led0: robosw_led0-pins {
+        function = "robosw_led0";
+        pins = "gpio12";
+      };
+
+      pinctrl_robosw_led1: robosw_led1-pins {
+        function = "robosw_led1";
+        pins = "gpio13";
+      };
+
+      pinctrl_usb_device_led: usb_device_led-pins {
+        function = "usb_device_led";
+        pins = "gpio14";
+      };
+
+      pinctrl_pci: pci-pins {
+        pinctrl_pci_req1: pci_req1-pins {
+          function = "pci_req1";
+          pins = "gpio16";
+        };
+
+        pinctrl_pci_gnt1: pci_gnt1-pins {
+          function = "pci_gnt1";
+          pins = "gpio17";
+        };
+
+        pinctrl_pci_intb: pci_intb-pins {
+          function = "pci_intb";
+          pins = "gpio18";
+        };
+
+        pinctrl_pci_req0: pci_req0-pins {
+          function = "pci_req0";
+          pins = "gpio19";
+        };
+
+        pinctrl_pci_gnt0: pci_gnt0-pins {
+          function = "pci_gnt0";
+          pins = "gpio20";
+        };
+      };
+
+      pinctrl_pcmcia: pcmcia-pins {
+        pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
+          function = "pcmcia_cd1";
+          pins = "gpio22";
+        };
+
+        pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
+          function = "pcmcia_cd2";
+          pins = "gpio23";
+        };
+
+        pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
+          function = "pcmcia_vs1";
+          pins = "gpio24";
+        };
+
+        pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
+          function = "pcmcia_vs2";
+          pins = "gpio25";
+        };
+      };
+
+      pinctrl_ebi_cs2: ebi_cs2-pins {
+        function = "ebi_cs2";
+        pins = "gpio26";
+      };
+
+      pinctrl_ebi_cs3: ebi_cs3-pins {
+        function = "ebi_cs3";
+        pins = "gpio27";
+      };
+
+      pinctrl_spi_cs2: spi_cs2-pins {
+        function = "spi_cs2";
+        pins = "gpio28";
+      };
+
+      pinctrl_spi_cs3: spi_cs3-pins {
+        function = "spi_cs3";
+        pins = "gpio29";
+      };
+
+      pinctrl_spi_cs4: spi_cs4-pins {
+        function = "spi_cs4";
+        pins = "gpio30";
+      };
+
+      pinctrl_spi_cs5: spi_cs5-pins {
+        function = "spi_cs5";
+        pins = "gpio31";
+      };
+
+      pinctrl_uart1: uart1-pins {
+        function = "uart1";
+        group = "uart1_grp";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
new file mode 100644
index 0000000000..3914529a32
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
@@ -0,0 +1,132 @@
+Broadcom Cygnus IOMUX Controller
+
+The Cygnus IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+
+- compatible:
+    Must be "brcm,cygnus-pinmux"
+
+- reg:
+    Define the base and range of the I/O address space that contains the Cygnus
+IOMUX registers
+
+Properties in subnodes:
+
+- function:
+    The mux function to select
+
+- groups:
+    The list of groups to select with a given function
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+	pinmux: pinmux@0301d0c8 {
+		compatible = "brcm,cygnus-pinmux";
+		reg = <0x0301d0c8 0x1b0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_default>;
+
+		i2s0_default: i2s0_default {
+			mux {
+				function = "i2s0";
+				groups = "i2s0_0_grp", "i2s0_1_grp";
+			};
+		};
+	};
+
+List of supported functions and groups in Cygnus:
+
+"i2s0": "i2s0_0_grp", "i2s0_1_grp"
+
+"i2s1": "i2s1_0_grp", "i2s1_1_grp"
+
+"i2s2": "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp"
+
+"spdif": "spdif_grp"
+
+"pwm0": "pwm0_grp"
+
+"pwm1": "pwm1_grp"
+
+"pwm2": "pwm2_grp"
+
+"pwm3": "pwm3_grp"
+
+"pwm4": "pwm4_grp"
+
+"pwm5": "pwm5_grp"
+
+"key": "key0_grp", "key1_grp", "key2_grp", "key3_grp", "key4_grp", "key5_grp",
+"key6_grp", "key7_grp", "key8_grp", "key9_grp", "key10_grp", "key11_grp",
+"key12_grp", "key13_grp", "key14_grp", "key15_grp"
+
+"audio_dte": "audio_dte0_grp", "audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp"
+
+"smart_card0": "smart_card0_grp", "smart_card0_fcb_grp"
+
+"smart_card1": "smart_card1_grp", "smart_card1_fcb_grp"
+
+"spi0": "spi0_grp"
+
+"spi1": "spi1_grp"
+
+"spi2": "spi2_grp"
+
+"spi3": "spi3_grp"
+
+"spi4": "spi4_0_grp", "spi4_1_grp"
+
+"spi5": "spi5_grp"
+
+"sw_led0": "sw_led0_0_grp", "sw_led0_1_grp"
+
+"sw_led1": "sw_led1_grp"
+
+"sw_led2": "sw_led2_0_grp", "sw_led2_1_grp"
+
+"d1w": "d1w_grp"
+
+"lcd": "lcd_grp"
+
+"sram": "sram_0_grp", "sram_1_grp"
+
+"uart0": "uart0_grp"
+
+"uart1": "uart1_grp", "uart1_dte_grp"
+
+"uart2": "uart2_grp"
+
+"uart3": "uart3_grp"
+
+"uart4": "uart4_grp"
+
+"qspi": "qspi_0_grp", "qspi_1_grp"
+
+"nand": "nand_grp"
+
+"sdio0": "sdio0_grp", "sdio0_cd_grp", "sdio0_mmc_grp"
+
+"sdio1": "sdio1_data_0_grp", "sdio1_data_1_grp", "sdio1_cd_grp",
+"sdio1_led_grp", "sdio1_mmc_grp"
+
+"can0": "can0_grp"
+
+"can1": "can1_grp"
+
+"cam": "cam_led_grp", "cam_0_grp", "cam_1_grp"
+
+"bsc1": "bsc1_grp"
+
+"pcie_clkreq": "pcie_clkreq_grp"
+
+"usb0_oc": "usb0_oc_grp"
+
+"usb1_oc": "usb1_oc_grp"
+
+"usb2_oc": "usb2_oc_grp"
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
new file mode 100644
index 0000000000..a73cbeb0f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
@@ -0,0 +1,123 @@
+Broadcom iProc GPIO/PINCONF Controller
+
+Required properties:
+
+- compatible:
+    "brcm,iproc-gpio" for the generic iProc based GPIO controller IP that
+    supports full-featured pinctrl and GPIO functions used in various iProc
+    based SoCs
+
+    May contain an SoC-specific compatibility string to accommodate any
+    SoC-specific features
+
+    "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", or
+    "brcm,cygnus-crmu-gpio" for Cygnus SoCs
+
+    "brcm,iproc-nsp-gpio" for the iProc NSP SoC that has drive strength support
+    disabled
+
+    "brcm,iproc-stingray-gpio" for the iProc Stingray SoC that has the general
+    pinctrl support completely disabled in this IP block. In Stingray, a
+    different IP block is used to handle pinctrl related functions
+
+- reg:
+    Define the base and range of the I/O address space that contains SoC
+GPIO/PINCONF controller registers
+
+- ngpios:
+    Total number of in-use slots in GPIO controller
+
+- #gpio-cells:
+    Must be two. The first cell is the GPIO pin number (within the
+controller's pin space) and the second cell is used for the following:
+    bit[0]: polarity (0 for active high and 1 for active low)
+
+- gpio-controller:
+    Specifies that the node is a GPIO controller
+
+Optional properties:
+
+- interrupts:
+    Interrupt ID
+
+- interrupt-controller:
+    Specifies that the node is an interrupt controller
+
+- gpio-ranges:
+    Specifies the mapping between gpio controller and pin-controllers pins.
+    This requires 4 fields in cells defined as -
+    1. Phandle of pin-controller.
+    2. GPIO base pin offset.
+    3  Pin-control base pin offset.
+    4. number of gpio pins which are linearly mapped from pin base.
+
+Supported generic PINCONF properties in child nodes:
+
+- pins:
+    The list of pins (within the controller's own pin space) that properties
+in the node apply to. Pin names are "gpio-<pin>"
+
+- bias-disable:
+    Disable pin bias
+
+- bias-pull-up:
+    Enable internal pull up resistor
+
+- bias-pull-down:
+    Enable internal pull down resistor
+
+- drive-strength:
+    Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA)
+
+Example:
+	gpio_ccm: gpio@1800a000 {
+		compatible = "brcm,cygnus-ccm-gpio";
+		reg = <0x1800a000 0x50>,
+		      <0x0301d164 0x20>;
+		ngpios = <24>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+
+		touch_pins: touch_pins {
+			pwr: pwr {
+				pins = "gpio-0";
+				drive-strength = <16>;
+			};
+
+			event: event {
+				pins = "gpio-1";
+				bias-pull-up;
+			};
+		};
+	};
+
+	gpio_asiu: gpio@180a5000 {
+		compatible = "brcm,cygnus-asiu-gpio";
+		reg = <0x180a5000 0x668>;
+		ngpios = <146>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		gpio-ranges = <&pinctrl 0 42 1>,
+				<&pinctrl 1 44 3>;
+	};
+
+	/*
+	 * Touchscreen that uses the CCM GPIO 0 and 1
+	 */
+	tsc {
+		...
+		...
+		gpio-pwr = <&gpio_ccm 0 0>;
+		gpio-event = <&gpio_ccm 1 0>;
+	};
+
+	/* Bluetooth that uses the ASIU GPIO 5, with polarity inverted */
+	bluetooth {
+		...
+		...
+		bcm,rfkill-bank-sel = <&gpio_asiu 5 1>
+	}
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
new file mode 100644
index 0000000000..0a39dd26ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar pins mux controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Some of Northstar SoCs's pins can be used for various purposes thanks to the
+  mux controller. This binding allows describing mux controller and listing
+  available functions. They can be referenced later by other bindings to let
+  system configure controller correctly.
+
+  A list of pins varies across chipsets so few bindings are available.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4708-pinmux
+      - brcm,bcm4709-pinmux
+      - brcm,bcm53012-pinmux
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: cru_gpio_control
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: pin node
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ]
+      groups:
+        minItems: 1
+        maxItems: 4
+        items:
+          enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                  uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ]
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4708-pinmux
+    then:
+      patternProperties:
+        '-pins$':
+          properties:
+            function:
+              enum: [ spi, i2c, pwm, uart1 ]
+            groups:
+              items:
+                enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                        uart1_grp ]
+
+required:
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@1800c1c0 {
+        compatible = "brcm,bcm4708-pinmux";
+        reg = <0x1800c1c0 0x24>;
+        reg-names = "cru_gpio_control";
+
+        spi-pins {
+            function = "spi";
+            groups = "spi_grp";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
new file mode 100644
index 0000000000..40e0a9a195
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
@@ -0,0 +1,102 @@
+Broadcom Northstar2 IOMUX Controller
+
+The Northstar2 IOMUX controller supports group based mux configuration. There
+are some individual pins that support modifying the pinconf parameters.
+
+Required properties:
+
+- compatible:
+    Must be "brcm,ns2-pinmux"
+
+- reg:
+    Define the base and range of the I/O address space that contains the
+    Northstar2 IOMUX and pin configuration registers.
+
+Properties in sub nodes:
+
+- function:
+    The mux function to select
+
+- groups:
+    The list of groups to select with a given function
+
+- pins:
+    List of pin names to change configuration
+
+The generic properties bias-disable, bias-pull-down, bias-pull-up,
+drive-strength, slew-rate, input-enable, input-disable are supported
+for some individual pins listed at the end.
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+	pinctrl: pinctrl@6501d130 {
+		compatible = "brcm,ns2-pinmux";
+		reg = <0x6501d130 0x08>,
+		      <0x660a0028 0x04>,
+		      <0x660009b0 0x40>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;
+
+		/* Select nand function */
+		nand_sel: nand_sel {
+			function = "nand";
+			groups = "nand_grp";
+		};
+
+		/* Pull up the uart3 rx pin */
+		uart3_rx: uart3_rx {
+			pins = "uart3_sin";
+			bias-pull-up;
+		};
+
+		/* Set the drive strength of sdio d4 pin */
+		sdio0_d4: sdio0_d4 {
+			pins = "sdio0_data4";
+			drive-strength = <8>;
+		};
+	};
+
+List of supported functions and groups in Northstar2:
+
+"nand": "nand_grp"
+
+"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp",
+	"nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp",
+	"nor_addr_12_15_grp"
+
+"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp",
+	"gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp",
+	"gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp",
+	"gpio_28_29_grp", "gpio_30_31_grp"
+
+"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp",
+	"pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp"
+
+"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp"
+
+"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp",
+	"uart1_rts_cts_grp", "uart1_in_out_grp"
+
+"uart2": "uart2_rts_cts_grp"
+
+"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp"
+
+
+List of pins that support pinconf parameters:
+
+"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout",
+"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck",
+"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7",
+"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4",
+"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1",
+"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk",
+"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1",
+"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk",
+"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc",
+"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent",
+"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc",
+"usb2_overcurrent", "sata_led1", "sata_led0"
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt
new file mode 100644
index 0000000000..0844168a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt
@@ -0,0 +1,80 @@
+Broadcom Northstar plus (NSP) GPIO/PINCONF Controller
+
+Required properties:
+- compatible:
+    Must be "brcm,nsp-gpio-a"
+
+- reg:
+    Should contain the register physical address and length for each of
+    GPIO base, IO control registers
+
+- #gpio-cells:
+    Must be two. The first cell is the GPIO pin number (within the
+    controller's pin space) and the second cell is used for the following:
+    bit[0]: polarity (0 for active high and 1 for active low)
+
+- gpio-controller:
+    Specifies that the node is a GPIO controller
+
+- ngpios:
+    Number of gpios supported (58x25 supports 32 and 58x23 supports 24)
+
+Optional properties:
+- interrupts:
+    Interrupt ID
+
+- interrupt-controller:
+    Specifies that the node is an interrupt controller
+
+- gpio-ranges:
+    Specifies the mapping between gpio controller and pin-controllers pins.
+    This requires 4 fields in cells defined as -
+    1. Phandle of pin-controller.
+    2. GPIO base pin offset.
+    3  Pin-control base pin offset.
+    4. number of gpio pins which are linearly mapped from pin base.
+
+Supported generic PINCONF properties in child nodes:
+- pins:
+    The list of pins (within the controller's own pin space) that properties
+    in the node apply to. Pin names are "gpio-<pin>"
+
+- bias-disable:
+    Disable pin bias
+
+- bias-pull-up:
+    Enable internal pull up resistor
+
+- bias-pull-down:
+    Enable internal pull down resistor
+
+- drive-strength:
+    Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA)
+
+Example:
+
+	gpioa: gpio@18000020 {
+		compatible = "brcm,nsp-gpio-a";
+		reg = <0x18000020 0x100>,
+		      <0x1803f1c4 0x1c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <32>;
+		gpio-ranges = <&pinctrl 0 0 31>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+
+		/* Hog a few default settings */
+		pinctrl-names = "default";
+		pinctrl-0 = <&led>;
+		led: led {
+			pins = "gpio-1";
+			bias-pull-up;
+		};
+
+		pwr: pwr {
+			gpio-hog;
+			gpios = <3 1>;
+			output-high;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
new file mode 100644
index 0000000000..dede11e4ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
@@ -0,0 +1,79 @@
+Broadcom NSP (Northstar plus) IOMUX Controller
+
+The NSP IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+- compatible:
+    Must be "brcm,nsp-pinmux"
+
+- reg:
+    Should contain the register physical address and length for each of
+    GPIO_CONTROL0, GP_AUX_SEL and IPROC_CONFIG IOMUX registers
+
+Properties in subnodes:
+- function:
+    The mux function to select
+
+- groups:
+    The list of groups to select with a given function
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+	pinmux: pinmux@1803f1c0 {
+		compatible = "brcm,nsp-pinmux";
+		reg = <0x1803f1c0 0x04>,
+		      <0x18030028 0x04>,
+		      <0x1803f408 0x04>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;
+
+		pwm: pwm {
+			function = "pwm";
+			groups = "pwm0_grp", "pwm1_grp";
+		};
+
+		gpio_b: gpio_b {
+			function = "gpio_b";
+			groups = "gpio_b_0_grp", "gpio_b_1_grp";
+		};
+
+		nand_sel: nand_sel {
+			function = "nand";
+			groups = "nand_grp";
+		};
+	};
+
+List of supported functions and groups in Northstar Plus:
+
+"spi": "spi_grp"
+
+"i2c": "i2c_grp"
+
+"mdio": "mdio_grp"
+
+"pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
+
+"gpio_b": "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", "gpio_b_3_grp"
+
+"uart1": "uart1_grp"
+
+"uart2": "uart2_grp"
+
+"synce": "synce_grp"
+
+"sata_led_grps": "sata0_led_grp", "sata1_led_grp"
+
+"xtal_out": "xtal_out_grp"
+
+"sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
+
+"switch_led": "switch_p05_led0_grp", "switch_p05_led1_grp"
+
+"nand": "nand_grp"
+
+"emmc": "emmc_grp"
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
new file mode 100644
index 0000000000..beb769e887
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 FPIOA
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+  The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
+  controller allows assigning any of 256 possible functions to any of
+  48 IO pins of the SoC. Pin function configuration is performed on
+  a per-pin basis.
+
+properties:
+  compatible:
+    const: canaan,k210-fpioa
+
+  reg:
+    maxItems: 1
+    description:
+      Address and length of the register set for the FPIOA controller.
+
+  clocks:
+    items:
+      - description: Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  canaan,k210-sysctl-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of the K210 system controller node
+          - description: offset of its power domain control register
+    description: |
+      phandle of the K210 system controller node and offset of its
+      power domain control register.
+
+patternProperties:
+  '-pinmux$':
+    type: object
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired pin
+      configuration. Client device sub-nodes use the pinux property
+      below.
+
+    properties:
+      pinmux:
+        description:
+          List of IO pins alternate functions. The values for each IO
+          pin is a combination of an IO pin number (0 to 47) with the
+          desired function for the IO pin. Functions are defined as
+          macros in include/dt-bindings/pinctrl/k210-fpioa.h.
+          The K210_FPIOA(IO pin, function) macro is provided to
+          facilitate the combination of IO pin numbers and functions.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+  '-pins$':
+    type: object
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired
+      configuration of pins. Client device sub-nodes use the
+      properties below.
+
+    properties:
+      pins:
+        description:
+          List of IO pins affected by the properties specified in this
+          subnode. IO pins are identified using the pin names "IO_xx".
+          Pin configuration nodes can also define the power domain to
+          be used for the SoC pin groups A0 (IO pins 0-5),
+          A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
+          B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
+          C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
+          power-source property.
+        items:
+          anyOf:
+            - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
+            - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
+                      IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
+                      IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
+                      IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
+                      IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
+                      IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
+                      IO_43, IO_44, IO_45, IO_46, IO_47,
+                      A0, A1, A2, B3, B4, B5, C6, C7 ]
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength: true
+
+      drive-strength-microamp: true
+
+      input-enable: true
+
+      input-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      input-polarity-invert:
+        type: boolean
+        description:
+          Enable or disable pin input polarity inversion.
+
+      output-enable: true
+
+      output-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      output-polarity-invert:
+        type: boolean
+        description:
+          Enable or disable pin output polarity inversion.
+
+      slew-rate: true
+
+      power-source: true
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - canaan,k210-sysctl-power
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/k210-fpioa.h>
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    fpioa: pinmux@502b0000 {
+      compatible = "canaan,k210-fpioa";
+      reg = <0x502b0000 0x100>;
+      clocks = <&sysclk K210_CLK_FPIOA>,
+               <&sysclk K210_CLK_APB0>;
+      clock-names = "ref", "pclk";
+      resets = <&sysrst K210_RST_FPIOA>;
+      canaan,k210-sysctl-power = <&sysctl 108>;
+      pinctrl-0 = <&jtag_pinctrl>;
+      pinctrl-names = "default";
+
+      jtag_pinctrl: jtag-pinmux {
+        pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+                 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+                 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+                 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..5e000b3fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the pinctrl portion of
+  the driver.
+
+  Also see these documents for generic binding information:
+    [1] GPIO : ../gpio/gpio.txt
+    [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+  And these for relevant defines:
+    [3] include/dt-bindings/pinctrl/lochnagar.h
+
+  This binding must be part of the Lochnagar MFD binding:
+    [4] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the pin number and the second cell is used
+      to specify optional parameters.
+    const: 2
+
+  gpio-ranges:
+    description:
+      Range of pins managed by the GPIO controller, see [1]. Both the
+      GPIO and Pinctrl base should be set to zero and the count to the
+      appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
+    maxItems: 1
+
+  pin-settings:
+    type: object
+    patternProperties:
+      '-pins$':
+        description:
+          The pin configurations are defined as a child of the pinctrl
+          states node, see [2]. Each sub-node can have the following
+          properties.
+        type: object
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              A list of groups to select (either this or "pins" must be
+              specified), available groups.
+            enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
+                    dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
+                    gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
+                    soundcard-aif ]
+
+          pins:
+            description:
+              A list of pin names to select (either this or "groups" must
+              be specified), available pins.
+            enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+                    fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+                    codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+                    codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+                    dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+                    gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
+                    codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
+                    codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
+                    codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
+                    codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
+                    dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
+                    dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
+                    dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
+                    psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+                    psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
+                    gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
+                    gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
+                    gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+                    gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
+                    gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
+                    dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+                    gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
+                    codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+                    codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
+                    codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
+                    codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+                    dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+                    i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
+                    dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
+                    psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
+                    dsp-gpio20, led1, led2 ]
+
+          function:
+            description:
+              The mux function to select, available functions.
+            enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+                    fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+                    codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+                    codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+                    dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+                    gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
+                    dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
+                    spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
+                    clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+                    gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
+                    codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+                    spdif-mclk, codec-irq, codec-reset, dsp-reset,
+                    dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
+                    codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+                    codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+                    codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
+                    codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
+                    dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+                    dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+                    gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
+                    i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
+                    i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
+                    psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
+                    psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+                    codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+                    codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
+                    codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
+                    codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
+                    codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+                    dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
+                    dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
+                    dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
+                    gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
+                    gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
+                    gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
+                    gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
+                    gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+                    gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
+                    soundcard-aif ]
+
+          output-enable:
+            description:
+              Specifies that an AIF group will be used as a master
+              interface (either this or input-enable is required if a
+              group is being muxed to an AIF)
+
+          input-enable:
+            description:
+              Specifies that an AIF group will be used as a slave
+              interface (either this or output-enable is required if a
+              group is being muxed to an AIF)
+
+        additionalProperties: false
+
+        required:
+          - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - pinctrl-0
+  - pinctrl-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
new file mode 100644
index 0000000000..bb61a30321
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs pinctrl driver
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  The Cirrus Logic Madera codecs provide a number of GPIO functions for
+  interfacing to external hardware and to provide logic outputs to other devices.
+  Certain groups of GPIO pins also have an alternate function, normally as an
+  audio interface.
+
+  The set of available GPIOs, functions and alternate function groups differs
+  between CODECs so refer to the datasheet for the CODEC for further information
+  on what is supported on that device.
+
+  The properties for this driver exist within the parent MFD driver node.
+
+  See also the core bindings for the parent MFD driver:
+
+    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+  And the generic pinmix bindings:
+
+    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+properties:
+  pin-settings:
+    description:
+      One subnode is required to contain the default settings. It
+      contains an arbitrary number of configuration subnodes, one for
+      each group or pin configuration you want to apply as a default.
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+        properties:
+          groups:
+            description:
+              Name of one pin group to configure.
+            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
+                    pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
+                    gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
+                    gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
+                    gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+                    gpio22, gpio23, gpio24, gpio25, gpio26, gpio27,
+                    gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+                    gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ]
+
+          function:
+            description:
+              Name of function to assign to this group.
+            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
+                    pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
+                    dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
+                    fll1-lock, fll2-clk, fll2-lock, fll3-clk,
+                    fll3-lock, fllao-clk, fllao-lock, opclk,
+                    opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
+                    asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
+                    spkl-short-circuit, spkr-short-circuit,
+                    spk-shutdown, spk-overheat-shutdown,
+                    spk-overheat-warn, timer1-sts, timer2-sts,
+                    timer3-sts, timer4-sts, timer5-sts, timer6-sts,
+                    timer7-sts, timer8-sts, log1-fifo-ne,
+                    log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
+                    log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
+                    log8-fifo-ne ]
+
+          bias-disable: true
+
+          bias-bus-hold: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          drive-push-pull: true
+
+          drive-open-drain: true
+
+          drive-strength:
+            enum: [ 4, 8 ]
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          input-debounce: true
+
+          output-low: true
+
+          output-high: true
+
+        additionalProperties: false
+
+        required:
+          - groups
+
+    additionalProperties: false
+
+required:
+  - pinctrl-0
+  - pinctrl-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt
new file mode 100644
index 0000000000..23ce8dc269
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt
@@ -0,0 +1,86 @@
+Conexant Digicolor CX92755 General Purpose Pin Mapping
+
+This document describes the device tree binding of the pin mapping hardware
+modules in the Conexant Digicolor CX92755 SoCs. The CX92755 in one of the
+Digicolor series of SoCs.
+
+=== Pin Controller Node ===
+
+Required Properties:
+
+- compatible: Must be "cnxt,cx92755-pinctrl"
+- reg: Base address of the General Purpose Pin Mapping register block and the
+  size of the block.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Must be <2>. The first cell is the pin number and the
+  second cell is used to specify flags. See include/dt-bindings/gpio/gpio.h
+  for possible values.
+
+For example, the following is the bare minimum node:
+
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+As a pin controller device, in addition to the required properties, this node
+should also contain the pin configuration nodes that client devices reference,
+if any.
+
+For a general description of GPIO bindings, please refer to ../gpio/gpio.txt.
+
+=== Pin Configuration Node ===
+
+Each pin configuration node is a sub-node of the pin controller node and is a
+container of an arbitrary number of subnodes, called pin group nodes in this
+document.
+
+Please refer to the pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the definition of a
+"pin configuration node".
+
+=== Pin Group Node ===
+
+A pin group node specifies the desired pin mux for an arbitrary number of
+pins. The name of the pin group node is optional and not used.
+
+A pin group node only affects the properties specified in the node, and has no
+effect on any properties that are omitted.
+
+The pin group node accepts a subset of the generic pin config properties. For
+details generic pin config properties, please refer to pinctrl-bindings.txt
+and <include/linux/pinctrl/pinconfig-generic.h>.
+
+Required Pin Group Node Properties:
+
+- pins: Multiple strings. Specifies the name(s) of one or more pins to be
+  configured by this node. The format of a pin name string is "GP_xy", where x
+  is an uppercase character from 'A' to 'R', and y is a digit from 0 to 7.
+- function: String. Specifies the pin mux selection. Values must be one of:
+  "gpio", "client_a", "client_b", "client_c"
+
+Example:
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+
+		uart0_default: uart0_active {
+			data_signals {
+				pins = "GP_O0", "GP_O1";
+				function = "client_b";
+			};
+		};
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		...
+		pinctrl-0 = <&uart0_default>;
+		pinctrl-names = "default";
+	};
+
+In the example above, a single pin group configuration node defines the
+"client select" for the Rx and Tx signals of uart0. The uart0 node references
+that pin configuration node using the &uart0_default phandle.
diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
new file mode 100644
index 0000000000..4346ff2dd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
@@ -0,0 +1,68 @@
+Cortina Systems Gemini pin controller
+
+This pin controller is found in the Cortina Systems Gemini SoC family,
+see further arm/gemini.txt. It is a purely group-based multiplexing pin
+controller.
+
+The pin controller node must be a subnode of the system controller node.
+
+Required properties:
+- compatible: "cortina,gemini-pinctrl"
+
+Subnodes of the pin controller contain pin control multiplexing set-up
+and pin configuration of individual pins.
+
+Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes
+and generic pin config nodes.
+
+Supported configurations:
+- skew-delay is supported on the Ethernet pins
+- drive-strength with 4, 8, 12 or 16 mA as argument is supported for
+  entire groups on the groups "idegrp", "gmii_gmac0_grp", "gmii_gmac1_grp"
+  and "pcigrp".
+
+Example:
+
+
+syscon {
+	compatible = "cortina,gemini-syscon";
+	...
+	pinctrl {
+		compatible = "cortina,gemini-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+		    <&vcontrol_default_pins>;
+
+		dram_default_pins: pinctrl-dram {
+			mux {
+				function = "dram";
+				groups = "dramgrp";
+			};
+		};
+		rtc_default_pins: pinctrl-rtc {
+			mux {
+				function = "rtc";
+				groups = "rtcgrp";
+			};
+		};
+		power_default_pins: pinctrl-power {
+			mux {
+				function = "power";
+				groups = "powergrp";
+			};
+		};
+		system_default_pins: pinctrl-system {
+			mux {
+				function = "system";
+				groups = "systemgrp";
+			};
+		};
+		(...)
+		uart_default_pins: pinctrl-uart {
+			mux {
+				function = "uart";
+				groups = "uartrxtxgrp";
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
new file mode 100644
index 0000000000..7f30ec2f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8C95X0 I2C GPIO expander
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders.
+  Pin function configuration is performed on a per-pin basis.
+
+properties:
+  compatible:
+    enum:
+      - cypress,cy8c9520
+      - cypress,cy8c9540
+      - cypress,cy8c9560
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Optional power supply.
+
+  reset-gpios:
+    description: GPIO connected to the XRES pin
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: '^gp([0-7][0-7])$'
+        minItems: 1
+        maxItems: 60
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, pwm ]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      drive-open-source: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl@20 {
+        compatible = "cypress,cy8c9520";
+        reg = <0x20>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        vdd-supply = <&p3v3>;
+        gpio-reserved-ranges = <5 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
new file mode 100644
index 0000000000..a1050b5982
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
@@ -0,0 +1,93 @@
+* Freescale IOMUX Controller (IOMUXC) for i.MX
+
+The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called ALT modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the IOMUXC controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Freescale IMX pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'mux' selects the function mode(also named mux
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, open drain, drive strength, etc.
+
+Required properties for iomux controller:
+- compatible: "fsl,<soc>-iomuxc"
+  Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx*-pinfunc.h under device tree source folder. The last integer CONFIG is
+  the pad setting value like pull-up on this pin. And that's why fsl,pins entry
+  looks like <PIN_FUNC_ID CONFIG> in the example below.
+
+Bits used for CONFIG:
+NO_PAD_CTL(1 << 31): indicate this pin does not need config.
+
+SION(1 << 30): Software Input On Field.
+Force the selected mux mode input path no matter of MUX_MODE functionality.
+By default the input path is determined by functionality of the selected
+mux mode (regular).
+
+Other bits are used for PAD setting.
+Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
+of bits definitions.
+
+NOTE:
+Some requirements for using fsl,imx-pinctrl binding:
+1. We have pin function node defined under iomux controller node to represent
+   what pinmux functions this SoC supports.
+2. The pin configuration node intends to work on a specific function should
+   to be defined under that specific function node.
+   The function node's name should represent well about what function
+   this group of pins in this pin configuration node are working on.
+3. The driver can use the function node's name and pin configuration node's
+   name describe the pin function and group hierarchy.
+   For example, Linux IMX pinctrl driver takes the function node's name
+   as the function name and pin configuration node's name as group name to
+   create the map table.
+4. Each pin configuration node should have a phandle, devices can set pins
+   configurations by referring to the phandle of that pin configuration node.
+
+Examples:
+usdhc@219c000 { /* uSDHC4 */
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_1>;
+};
+
+iomuxc@20e0000 {
+	compatible = "fsl,imx6q-iomuxc";
+	reg = <0x020e0000 0x4000>;
+
+	/* shared pinctrl settings */
+	usdhc4 {
+		pinctrl_usdhc4_1: usdhc4grp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+			>;
+	};
+	....
+};
+Refer to the IOMUXC controller chapter in imx6q datasheet,
+0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
+80Ohm driver strength and Fast Slew Rate.
+User should refer to each SoC spec to set the correct value.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
new file mode 100644
index 0000000000..fd653bde18
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
@@ -0,0 +1,23 @@
+* Freescale IMX25 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+CONFIG bits definition:
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE_CMOS		(0 << 3)
+PAD_CTL_ODE_OPENDRAIN		(1 << 3)
+PAD_CTL_DSE_NOMINAL		(0 << 1)
+PAD_CTL_DSE_HIGH		(1 << 1)
+PAD_CTL_DSE_MAX			(2 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx25-pinfunc.h in device tree source folder for all available
+imx25 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
new file mode 100644
index 0000000000..d1706ea825
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
@@ -0,0 +1,121 @@
+* Freescale IMX27 IOMUX Controller
+
+Required properties:
+- compatible: "fsl,imx27-iomuxc"
+
+The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
+
+Required properties for pin configuration node:
+- fsl,pins: three integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN MUX_ID CONFIG>.
+
+  PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+  configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+  number on the specific port (between 0 and 31).
+
+  MUX_ID is
+    function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+
+      function value is used to select the pin function.
+      Possible values:
+          0 - Primary function
+          1 - Alternate function
+          2 - GPIO
+      Registers: GIUS (GPIO In Use), GPR (General Purpose Register)
+
+      direction defines the data direction of the pin.
+      Possible values:
+          0 - Input
+          1 - Output
+      Register: DDIR
+
+      gpio_oconf configures the gpio submodule output signal. This does not
+      have any effect unless GPIO function is selected. A/B/C_IN are output
+      signals of function blocks A,B and C. Specific function blocks are
+      described in the reference manual.
+      Possible values:
+          0 - A_IN
+          1 - B_IN
+          2 - C_IN
+          3 - Data Register
+      Registers: OCR1, OCR2
+
+      gpio_iconfa/b configures the gpio submodule input to functionblocks A and
+      B. GPIO function should be selected if this is configured.
+      Possible values:
+          0 - GPIO_IN
+          1 - Interrupt Status Register
+          2 - Pulldown
+          3 - Pullup
+      Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2
+
+  CONFIG can be 0 or 1, meaning Pullup disable/enable.
+
+
+The iomux controller has gpio child nodes which are embedded in the iomux
+control registers. They have to be defined as child nodes of the iomux device
+node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges"
+properties for the iomux device node are required.
+
+Example:
+
+iomuxc: iomuxc@10015000 {
+	compatible = "fsl,imx27-iomuxc";
+	reg = <0x10015000 0x600>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	gpio1: gpio@10015000 {
+		...
+	};
+
+	...
+
+	uart {
+		pinctrl_uart1: uart-1 {
+			fsl,pins = <
+				0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */
+				0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */
+				0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */
+				0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */
+			>;
+		};
+
+		...
+	};
+};
+
+
+For convenience there are macros defined in imx27-pinfunc.h which provide PIN
+and MUX_ID. They are structured as MX27_PAD_<Pad name>__<Signal name>. The names
+are defined in the i.MX27 reference manual.
+
+The above example using macros:
+
+iomuxc: iomuxc@10015000 {
+	compatible = "fsl,imx27-iomuxc";
+	reg = <0x10015000 0x600>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	gpio1: gpio@10015000 {
+		...
+	};
+
+	...
+
+	uart {
+		pinctrl_uart1: uart-1 {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
new file mode 100644
index 0000000000..c083dfd25d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
@@ -0,0 +1,33 @@
+* Freescale IMX35 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx35-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx35 datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_DRIVE_VOLAGAGE_18	(1 << 13)
+PAD_CTL_DRIVE_VOLAGAGE_33	(0 << 13)
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE_CMOS		(0 << 3)
+PAD_CTL_ODE_OPENDRAIN		(1 << 3)
+PAD_CTL_DSE_NOMINAL		(0 << 1)
+PAD_CTL_DSE_HIGH		(1 << 1)
+PAD_CTL_DSE_MAX			(2 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx35-pinfunc.h in device tree source folder for all available
+imx35 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
new file mode 100644
index 0000000000..6da01d619d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX50 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx50-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx50 datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE			(1 << 13)
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE			(1 << 3)
+PAD_CTL_DSE_LOW			(0 << 1)
+PAD_CTL_DSE_MED			(1 << 1)
+PAD_CTL_DSE_HIGH		(2 << 1)
+PAD_CTL_DSE_MAX			(3 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx50-pinfunc.h in device tree source folder for all available
+imx50 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
new file mode 100644
index 0000000000..4d1408fcc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX51 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx51-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx51 datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE			(1 << 13)
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE			(1 << 3)
+PAD_CTL_DSE_LOW			(0 << 1)
+PAD_CTL_DSE_MED			(1 << 1)
+PAD_CTL_DSE_HIGH		(2 << 1)
+PAD_CTL_DSE_MAX			(3 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx51-pinfunc.h in device tree source folder for all available
+imx51 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
new file mode 100644
index 0000000000..25dcb77cfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX53 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx53-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx53 datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE			(1 << 13)
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE			(1 << 3)
+PAD_CTL_DSE_LOW			(0 << 1)
+PAD_CTL_DSE_MED			(1 << 1)
+PAD_CTL_DSE_HIGH		(2 << 1)
+PAD_CTL_DSE_MAX			(3 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx53-pinfunc.h in device tree source folder for all available
+imx53 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
new file mode 100644
index 0000000000..0ac5bee875
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
@@ -0,0 +1,38 @@
+* Freescale IMX6 DualLite/Solo IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6dl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6dl datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6dl-pinfunc.h in device tree source folder for all available
+imx6dl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
new file mode 100644
index 0000000000..546610cf2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@@ -0,0 +1,38 @@
+* Freescale IMX6Q IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6q-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6q datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6q-pinfunc.h in device tree source folder for all available
+imx6q PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
new file mode 100644
index 0000000000..e5f6d1f065
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
@@ -0,0 +1,39 @@
+* Freescale IMX6 SoloLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6sl datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE                     (1 << 22)
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6sl-pinfunc.h in device tree source folder for all available
+imx6sl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
new file mode 100644
index 0000000000..175e8939a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
@@ -0,0 +1,40 @@
+* Freescale i.MX6 SLL IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6sll-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6SLL
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE			(1 << 22)
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6sll-pinfunc.h in device tree source folder for all available
+imx6sll PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt
new file mode 100644
index 0000000000..b1b595220f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 SoloX IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sx-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6sx-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6 SoloX
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 0000000000..7ca4f6118d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,37 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or
+  "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller.
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6 UltraLite
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
new file mode 100644
index 0000000000..7bd723ab12
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX7D IOMUX Controller
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7d-iomuxc
+          - fsl,imx7d-iomuxc-lpsr
+
+  reg:
+    maxItems: 1
+
+  fsl,input-sel:
+    description:
+      phandle for main iomuxc controller which shares the input select
+      register for daisy chain settings.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer
+          CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX7D Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx7d-iomuxc-lpsr
+
+then:
+  required:
+    - fsl,input-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: pinctrl@30330000 {
+      compatible = "fsl,imx7d-iomuxc";
+      reg = <0x30330000 0x10000>;
+
+      pinctrl_uart5: uart5grp {
+        fsl,pins =
+          <0x0160 0x03D0 0x0714 0x1 0x0	0x7e>,
+          <0x0164 0x03D4 0x0000 0x1 0x0	0x76>;
+      };
+    };
+  - |
+    iomuxc_lpsr: pinctrl@302c0000 {
+      compatible = "fsl,imx7d-iomuxc-lpsr";
+      reg = <0x302c0000 0x10000>;
+      fsl,input-sel = <&iomuxc>;
+
+      pinctrl_gpio_lpsr: gpio1-grp {
+          fsl,pins =
+            <0x0008 0x0038 0x0000 0x0 0x0	0x59>,
+            <0x000C 0x003C 0x0000 0x0 0x0	0x59>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
new file mode 100644
index 0000000000..bfa3703a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
@@ -0,0 +1,53 @@
+* Freescale i.MX7ULP IOMUX Controller
+
+i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
+ports and IOMUXC DDR for DDR interface.
+
+Note:
+This binding doc is only for the IOMUXC1 support in A7 Domain and it only
+supports generic pin config.
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible:	"fsl,imx7ulp-iomuxc1".
+- fsl,pins:	Each entry consists of 5 integers which represents the mux
+		and config setting for one pin. The first 4 integers
+		<mux_conf_reg input_reg mux_mode input_val> are specified
+		using a PIN_FUNC_ID macro, which can be found in
+		imx7ulp-pinfunc.h in the device tree source folder.
+		The last integer CONFIG is the pad setting value like
+		pull-up on this pin.
+
+		Please refer to i.MX7ULP Reference Manual for detailed
+		CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_OBE		(1 << 17)
+PAD_CTL_IBE		(1 << 16)
+PAD_CTL_LK		(1 << 16)
+PAD_CTL_DSE_HI		(1 << 6)
+PAD_CTL_DSE_STD		(0 << 6)
+PAD_CTL_ODE		(1 << 5)
+PAD_CTL_PUSH_PULL	(0 << 5)
+PAD_CTL_SRE_SLOW	(1 << 2)
+PAD_CTL_SRE_STD		(0 << 2)
+PAD_CTL_PE		(1 << 0)
+
+Examples:
+#include "imx7ulp-pinfunc.h"
+
+/* Pin Controller Node */
+iomuxc1: pinctrl@40ac0000 {
+	compatible = "fsl,imx7ulp-iomuxc1";
+	reg = <0x40ac0000 0x1000>;
+
+	/* Pin Configuration Node */
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x1
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x1
+		>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
new file mode 100644
index 0000000000..6068be11df
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8M IOMUX Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-iomuxc
+      - fsl,imx8mn-iomuxc
+      - fsl,imx8mp-iomuxc
+      - fsl,imx8mq-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>.
+          The last integer CONFIG is the pad setting value like pull-up on this
+          pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for
+          detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be
+                applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mm-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins =
+                <0x23C 0x4A4 0x4FC 0x0 0x0	0x140>,
+                <0x240 0x4A8 0x000 0x0 0x0	0x140>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
new file mode 100644
index 0000000000..7dcf681271
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8ulp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8ULP IOMUX Controller
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8ulp-iomuxc1
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 5 integers and represents the mux and config
+          setting for one pin. The first 4 integers <mux_config_reg input_reg
+          mux_mode input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8ULP Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_config_reg" indicates the offset of mux register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_mode" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@298c0000 {
+        compatible = "fsl,imx8ulp-iomuxc1";
+        reg = <0x298c0000 0x10000>;
+
+        pinctrl_lpuart5: lpuart5grp {
+            fsl,pins =
+                <0x0138 0x08F0 0x4 0x3	0x3>,
+                <0x013C 0x08EC 0x4 0x3	0x3>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
new file mode 100644
index 0000000000..2f24051029
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX93 IOMUX Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx93-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@443c0000 {
+        compatible = "fsl,imx93-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart3: uart3grp {
+            fsl,pins =
+                <0x48 0x1f8 0x41c 0x1 0x0	0x49>,
+                <0x4c 0x1fc 0x418 0x1 0x0	0x49>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
new file mode 100644
index 0000000000..db5fe66ad8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMXRT1050 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@401f8000 {
+        compatible = "fsl,imxrt1050-iomuxc";
+        reg = <0x401f8000 0x4000>;
+
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x0EC 0x2DC 0x000 0x2 0x0	0xf1>,
+              <0x0F0 0x2E0 0x000 0x2 0x0	0xf1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
new file mode 100644
index 0000000000..2e880b3e53
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT1170 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1170-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imxrt1170-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1170 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@400e8000 {
+        compatible = "fsl,imxrt1170-iomuxc";
+        reg = <0x400e8000 0x4000>;
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x16C 0x3B0 0x620 0x0 0x0  0xf1>,
+              <0x170 0x3B4 0x61C 0x0 0x0	0xf1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
new file mode 100644
index 0000000000..1e70a8aff2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -0,0 +1,127 @@
+* Freescale MXS Pin Controller
+
+The pins controlled by mxs pin controller are organized in banks, each bank
+has 32 pins.  Each pin has 4 multiplexing functions, and generally, the 4th
+function is GPIO.  The configuration on the pins includes drive strength,
+voltage and pull-up.
+
+Required properties:
+- compatible: "fsl,imx23-pinctrl" or "fsl,imx28-pinctrl"
+- reg: Should contain the register physical address and length for the
+  pin controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+The node of mxs pin controller acts as a container for an arbitrary number of
+subnodes.  Each of these subnodes represents some desired configuration for
+a group of pins, and only affects those parameters that are explicitly listed.
+In other words, a subnode that describes a drive strength parameter implies no
+information about pull-up. For this reason, even seemingly boolean values are
+actually tristates in this binding: unspecified, off, or on. Unspecified is
+represented as an absent property, and off/on are represented as integer
+values 0 and 1.
+
+Those subnodes under mxs pin controller node will fall into two categories.
+One is to set up a group of pins for a function, both mux selection and pin
+configurations, and it's called group node in the binding document.   The other
+one is to adjust the pin configuration for some particular pins that need a
+different configuration than what is defined in group node.  The binding
+document calls this type of node config node.
+
+On mxs, there is no hardware pin group. The pin group in this binding only
+means a group of pins put together for particular peripheral to work in
+particular function, like SSP0 functioning as mmc0-8bit.  That said, the
+group node should include all the pins needed for one function rather than
+having these pins defined in several group nodes.  It also means each of
+"pinctrl-*" phandle in client device node should only have one group node
+pointed in there, while the phandle can have multiple config node referenced
+there to adjust configurations for some pins in the group.
+
+Required subnode-properties:
+- fsl,pinmux-ids: An integer array.  Each integer in the array specify a pin
+  with given mux function, with bank, pin and mux packed as below.
+
+    [15..12] : bank number
+    [11..4]  : pin number
+    [3..0]   : mux selection
+
+  This integer with mux selection packed is used as an entity by both group
+  and config nodes to identify a pin.  The mux selection in the integer takes
+  effects only on group node, and will get ignored by driver with config node,
+  since config node is only meant to set up pin configurations.
+
+  Valid values for these integers are listed below.
+
+- reg: Should be the index of the group nodes for same function.  This property
+  is required only for group nodes, and should not be present in any config
+  nodes.
+
+Optional subnode-properties:
+- fsl,drive-strength: Integer.
+    0: MXS_DRIVE_4mA
+    1: MXS_DRIVE_8mA
+    2: MXS_DRIVE_12mA
+    3: MXS_DRIVE_16mA
+- fsl,voltage: Integer.
+    0: MXS_VOLTAGE_LOW  - 1.8 V
+    1: MXS_VOLTAGE_HIGH - 3.3 V
+- fsl,pull-up: Integer.
+    0: MXS_PULL_DISABLE - Disable the internal pull-up
+    1: MXS_PULL_ENABLE  - Enable the internal pull-up
+
+Note that when enabling the pull-up, the internal pad keeper gets disabled.
+Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
+will only disable the internal pad keeper.
+
+Examples:
+
+pinctrl@80018000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-pinctrl";
+	reg = <0x80018000 2000>;
+
+	mmc0_8bit_pins_a: mmc0-8bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA0__SSP0_D0
+			MX28_PAD_SSP0_DATA1__SSP0_D1
+			MX28_PAD_SSP0_DATA2__SSP0_D2
+			MX28_PAD_SSP0_DATA3__SSP0_D3
+			MX28_PAD_SSP0_DATA4__SSP0_D4
+			MX28_PAD_SSP0_DATA5__SSP0_D5
+			MX28_PAD_SSP0_DATA6__SSP0_D6
+			MX28_PAD_SSP0_DATA7__SSP0_D7
+			MX28_PAD_SSP0_CMD__SSP0_CMD
+			MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+			MX28_PAD_SSP0_SCK__SSP0_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc_cd_cfg: mmc-cd-cfg {
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_sck_cfg: mmc-sck-cfg {
+		fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+In this example, group node mmc0-8bit defines a group of pins for mxs SSP0
+to function as a 8-bit mmc device, with 8mA, 3.3V and pull-up configurations
+applied on all these pins.  And config nodes mmc-cd-cfg and mmc-sck-cfg are
+adjusting the configuration for pins card-detection and clock from what group
+node mmc0-8bit defines.  Only the configuration properties to be adjusted need
+to be listed in the config nodes.
+
+Valid values for i.MX28/i.MX23 pinmux-id are defined in
+arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h.
+The definitions for the padconfig properties can be found in
+arch/arm/boot/dts/mxs-pinfunc.h.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
new file mode 100644
index 0000000000..fcd729afee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Pinctrl Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the i.MX common pinctrl binding.
+  (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-iomuxc
+      - fsl,imx8qxp-iomuxc
+      - fsl,imx8dxl-iomuxc
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 3 integers and represents the pin ID, the mux value
+          and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
+          specified using a PIN_FUNC_ID macro, which can be found in
+          <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
+          the pad setting value like pull-up on this pin. Please refer to the
+          appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "pin_id" indicates the pin ID
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+        compatible = "fsl,imx8qxp-iomuxc";
+
+        pinctrl_lpuart0: lpuart0grp {
+            fsl,pins = <
+                111 0 0x06000020
+                112 0 0x06000020
+            >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
new file mode 100644
index 0000000000..ddcdeb697c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
@@ -0,0 +1,41 @@
+Freescale Vybrid VF610 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,vf610-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is
+  a pin working on a specific function, CONFIG is the pad setting value
+  such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
+  datasheet for the valid pad config settings.
+
+CONFIG bits definition:
+PAD_CTL_SPEED_LOW		(1 << 12)
+PAD_CTL_SPEED_MED		(2 << 12)
+PAD_CTL_SPEED_HIGH		(3 << 12)
+PAD_CTL_SRE_FAST		(1 << 11)
+PAD_CTL_SRE_SLOW		(0 << 11)
+PAD_CTL_ODE			(1 << 10)
+PAD_CTL_HYS			(1 << 9)
+PAD_CTL_DSE_DISABLE		(0 << 6)
+PAD_CTL_DSE_150ohm		(1 << 6)
+PAD_CTL_DSE_75ohm		(2 << 6)
+PAD_CTL_DSE_50ohm		(3 << 6)
+PAD_CTL_DSE_37ohm		(4 << 6)
+PAD_CTL_DSE_30ohm		(5 << 6)
+PAD_CTL_DSE_25ohm		(6 << 6)
+PAD_CTL_DSE_20ohm		(7 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_PKE			(1 << 3)
+PAD_CTL_PUE			(1 << 2)
+PAD_CTL_OBE_ENABLE		(1 << 1)
+PAD_CTL_IBE_ENABLE		(1 << 0)
+PAD_CTL_OBE_IBE_ENABLE		(3 << 0)
+
+Please refer to vf610-pinfunc.h in device tree source folder
+for all available PIN_FUNC_ID for Vybrid VF610.
diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
new file mode 100644
index 0000000000..a72dc31781
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -0,0 +1,217 @@
+Imagination Technologies Pistachio SoC pin controllers
+======================================================
+
+The pin controllers on Pistachio are a combined GPIO controller, (GPIO)
+interrupt controller, and pinmux + pinconf device. The system ("east") pin
+controller on Pistachio has 99 pins, 90 of which are MFIOs which can be
+configured as GPIOs. The 90 GPIOs are divided into 6 banks of up to 16 GPIOs
+each. The GPIO banks are represented as sub-nodes of the pad controller node.
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+Required properties for pin controller node:
+--------------------------------------------
+ - compatible: "img,pistachio-system-pinctrl".
+ - reg: Address range of the pinctrl registers.
+
+Required properties for GPIO bank sub-nodes:
+--------------------------------------------
+ - interrupts: Interrupt line for the GPIO bank.
+ - gpio-controller: Indicates the device is a GPIO controller.
+ - #gpio-cells: Must be two. The first cell is the GPIO pin number and the
+   second cell indicates the polarity. See <dt-bindings/gpio/gpio.h> for
+   a list of possible values.
+ - interrupt-controller: Indicates the device is an interrupt controller.
+ - #interrupt-cells: Must be two. The first cell is the GPIO pin number and
+   the second cell encodes the interrupt flags. See
+   <dt-bindings/interrupt-controller/irq.h> for a list of valid flags.
+
+Note that the N GPIO bank sub-nodes *must* be named gpio0, gpio1, ... gpioN-1.
+
+Required properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - pins: List of pins to which the configuration applies. See below for a
+   list of possible pins.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - function: Mux function for the specified pins. This is not applicable for
+   non-MFIO pins. See below for a list of valid functions for each pin.
+ - bias-high-impedance: Enable high-impedance mode.
+ - bias-pull-up: Enable weak pull-up.
+ - bias-pull-down: Enable weak pull-down.
+ - bias-bus-hold: Enable bus-keeper mode.
+ - drive-strength: Drive strength in mA. Supported values: 2, 4, 8, 12.
+ - input-schmitt-enable: Enable Schmitt trigger.
+ - input-schmitt-disable: Disable Schmitt trigger.
+ - slew-rate: Slew rate control. 0 for slow, 1 for fast.
+
+Pin		Functions
+---		---------
+mfio0		spim1
+mfio1		spim1, spim0, uart1
+mfio2		spim1, spim0, uart1
+mfio3		spim1
+mfio4		spim1
+mfio5		spim1
+mfio6		spim1
+mfio7		spim1
+mfio8		spim0
+mfio9		spim0
+mfio10		spim0
+mfio11		spis
+mfio12		spis
+mfio13		spis
+mfio14		spis
+mfio15		sdhost, mips_trace_clk, mips_trace_data
+mfio16		sdhost, mips_trace_dint, mips_trace_data
+mfio17		sdhost, mips_trace_trigout, mips_trace_data
+mfio18		sdhost, mips_trace_trigin, mips_trace_data
+mfio19		sdhost, mips_trace_dm, mips_trace_data
+mfio20		sdhost, mips_trace_probe_n, mips_trace_data
+mfio21		sdhost, mips_trace_data
+mfio22		sdhost, mips_trace_data
+mfio23		sdhost
+mfio24		sdhost
+mfio25		sdhost
+mfio26		sdhost
+mfio27		sdhost
+mfio28		i2c0, spim0
+mfio29		i2c0, spim0
+mfio30		i2c1, spim0
+mfio31		i2c1, spim1
+mfio32		i2c2
+mfio33		i2c2
+mfio34		i2c3
+mfio35		i2c3
+mfio36		i2s_out, audio_clk_in
+mfio37		i2s_out, debug_raw_cca_ind
+mfio38		i2s_out, debug_ed_sec20_cca_ind
+mfio39		i2s_out, debug_ed_sec40_cca_ind
+mfio40		i2s_out, debug_agc_done_0
+mfio41		i2s_out, debug_agc_done_1
+mfio42		i2s_out, debug_ed_cca_ind
+mfio43		i2s_out, debug_s2l_done
+mfio44		i2s_out
+mfio45		i2s_dac_clk, audio_sync
+mfio46		audio_trigger
+mfio47		i2s_in
+mfio48		i2s_in
+mfio49		i2s_in
+mfio50		i2s_in
+mfio51		i2s_in
+mfio52		i2s_in
+mfio53		i2s_in
+mfio54		i2s_in, spdif_in
+mfio55		uart0, spim0, spim1
+mfio56		uart0, spim0, spim1
+mfio57		uart0, spim0, spim1
+mfio58		uart0, spim1
+mfio59		uart1
+mfio60		uart1
+mfio61		spdif_out
+mfio62		spdif_in
+mfio63		eth, mips_trace_clk, mips_trace_data
+mfio64		eth, mips_trace_dint, mips_trace_data
+mfio65		eth, mips_trace_trigout, mips_trace_data
+mfio66		eth, mips_trace_trigin, mips_trace_data
+mfio67		eth, mips_trace_dm, mips_trace_data
+mfio68		eth, mips_trace_probe_n, mips_trace_data
+mfio69		eth, mips_trace_data
+mfio70		eth, mips_trace_data
+mfio71		eth
+mfio72		ir
+mfio73		pwmpdm, mips_trace_clk, sram_debug
+mfio74		pwmpdm, mips_trace_dint, sram_debug
+mfio75		pwmpdm, mips_trace_trigout, rom_debug
+mfio76		pwmpdm, mips_trace_trigin, rom_debug
+mfio77		mdc_debug, mips_trace_dm, rpu_debug
+mfio78		mdc_debug, mips_trace_probe_n, rpu_debug
+mfio79		ddr_debug, mips_trace_data, mips_debug
+mfio80		ddr_debug, mips_trace_data, mips_debug
+mfio81		dreq0, mips_trace_data, eth_debug
+mfio82		dreq1, mips_trace_data, eth_debug
+mfio83		mips_pll_lock, mips_trace_data, usb_debug
+mfio84		audio_pll_lock, mips_trace_data, usb_debug
+mfio85		rpu_v_pll_lock, mips_trace_data, sdhost_debug
+mfio86		rpu_l_pll_lock, mips_trace_data, sdhost_debug
+mfio87		sys_pll_lock, dreq2, socif_debug
+mfio88		wifi_pll_lock, dreq3, socif_debug
+mfio89		bt_pll_lock, dreq4, dreq5
+tck
+trstn
+tdi
+tms
+tdo
+jtag_comply
+safe_mode
+por_disable
+resetn
+
+Example:
+--------
+pinctrl@18101c00 {
+	compatible = "img,pistachio-system-pinctrl";
+	reg = <0x18101C00 0x400>;
+
+	gpio0: gpio0 {
+		interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	...
+
+	gpio5: gpio5 {
+		interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	...
+
+	uart0_xfer: uart0-xfer {
+		uart0-rxd {
+			pins = "mfio55";
+			function = "uart0";
+		};
+		uart0-txd {
+			pins = "mfio56";
+			function = "uart0";
+		};
+	};
+
+	uart0_rts_cts: uart0-rts-cts {
+		uart0-rts {
+			  pins = "mfio57";
+			  function = "uart0";
+		};
+		uart0-cts {
+			  pins = "mfio58";
+			  function = "uart0";
+		};
+	};
+};
+
+uart@... {
+	...
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_rts_cts>;
+	...
+};
+
+usb_vbus: fixed-regulator {
+	...
+	gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	...
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
new file mode 100644
index 0000000000..890961826c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs pin controller
+
+description: >
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
+  may be used as GPIOs, multiplexed device functions are configured within the
+  GPIO port configuration registers and it is typical to refer to pins using the
+  naming scheme "PxN" where x is a character identifying the GPIO port with
+  which the pin is associated and N is an integer from 0 to 31 identifying the
+  pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
+  and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B,
+  the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128
+  pins. The X2000 and the X2100 contains 5 GPIO ports, PA to PE, for a total of
+  160 pins. The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains
+  6 GPIO ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO
+  ports, PA to PG, for a total of 224 pins.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4730-pinctrl
+          - ingenic,jz4740-pinctrl
+          - ingenic,jz4725b-pinctrl
+          - ingenic,jz4750-pinctrl
+          - ingenic,jz4755-pinctrl
+          - ingenic,jz4760-pinctrl
+          - ingenic,jz4770-pinctrl
+          - ingenic,jz4775-pinctrl
+          - ingenic,jz4780-pinctrl
+          - ingenic,x1000-pinctrl
+          - ingenic,x1500-pinctrl
+          - ingenic,x1830-pinctrl
+          - ingenic,x2000-pinctrl
+          - ingenic,x2100-pinctrl
+      - items:
+          - const: ingenic,jz4760b-pinctrl
+          - const: ingenic,jz4760-pinctrl
+      - items:
+          - const: ingenic,x1000e-pinctrl
+          - const: ingenic,x1000-pinctrl
+      - items:
+          - const: ingenic,x2000e-pinctrl
+          - const: ingenic,x2000-pinctrl
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^gpio@[0-9]$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - ingenic,jz4730-gpio
+          - ingenic,jz4740-gpio
+          - ingenic,jz4725b-gpio
+          - ingenic,jz4750-gpio
+          - ingenic,jz4755-gpio
+          - ingenic,jz4760-gpio
+          - ingenic,jz4770-gpio
+          - ingenic,jz4775-gpio
+          - ingenic,jz4780-gpio
+          - ingenic,x1000-gpio
+          - ingenic,x1500-gpio
+          - ingenic,x1830-gpio
+          - ingenic,x2000-gpio
+          - ingenic,x2100-gpio
+
+      reg:
+        items:
+          - description: The GPIO bank number
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+        description:
+          Refer to ../interrupt-controller/interrupts.txt for more details.
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+      - interrupts
+      - interrupt-controller
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      properties:
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-up: true
+        bias-pull-down: true
+        output-low: true
+        output-high: true
+      additionalProperties: false
+
+    - type: object
+      additionalProperties:
+        type: object
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        properties:
+          function: true
+          groups: true
+          pins: true
+          bias-disable: true
+          bias-pull-up: true
+          bias-pull-down: true
+          output-low: true
+          output-high: true
+        additionalProperties: false
+
+examples:
+  - |
+    pinctrl@10010000 {
+      compatible = "ingenic,jz4770-pinctrl";
+      reg = <0x10010000 0x600>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio@0 {
+        compatible = "ingenic,jz4770-gpio";
+        reg = <0>;
+
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 32>;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <17>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
new file mode 100644
index 0000000000..1144ca2896
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC pinmux & GPIO controller
+
+maintainers:
+  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+  Pinmux & GPIO controller controls pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration.
+
+properties:
+  compatible:
+    const: intel,lgm-io
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function: true
+      groups: true
+      pins: true
+      pinmux: true
+      bias-pull-up: true
+      bias-pull-down: true
+      drive-strength: true
+      slew-rate: true
+      drive-open-drain: true
+      output-enable: true
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl: pinctrl@e2880000 {
+        compatible = "intel,lgm-io";
+        reg = <0xe2880000 0x100000>;
+
+        uart0-pins {
+             pins = <64>, /* UART_RX0 */
+                    <65>; /* UART_TX0 */
+             function = "CONSOLE_UART0";
+             pinmux = <1>,
+                      <1>;
+             groups = "CONSOLE_UART0";
+          };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
new file mode 100644
index 0000000000..005d95a9e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay pin controller
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Keem Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 80 pins.
+
+properties:
+  compatible:
+    const: intel,keembay-pinctrl
+
+  reg:
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    description: The number of GPIOs exposed.
+    const: 80
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+      Each interrupt line is shared by upto 4 GPIO lines.
+    maxItems: 8
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    additionalProperties: false
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO79".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: IO pads drive strength in milli Ampere.
+        enum: [2, 4, 8, 12]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Fast(~100MHz)
+                      1 - Slow(~50MHz)
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - ngpios
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    gpio@0 {
+        compatible = "intel,keembay-pinctrl";
+        reg = <0x600b0000 0x88>,
+              <0x600b0190 0x1ac>;
+        gpio-controller;
+        ngpios = <0x50>;
+        #gpio-cells = <0x2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    gpio@1 {
+        compatible = "intel,keembay-pinctrl";
+        reg = <0x600c0000 0x88>,
+              <0x600c0190 0x1ac>;
+        gpio-controller;
+        ngpios = <0x50>;
+        #gpio-cells = <0x2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt
new file mode 100644
index 0000000000..ac4da9fe07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt
@@ -0,0 +1,83 @@
+Lantiq FALCON pinmux controller
+
+Required properties:
+- compatible: "lantiq,pinctrl-falcon"
+- reg: Should contain the physical address and length of the gpio/pinmux
+  register range
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+We support 2 types of nodes.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+  Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+  group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+
+  mux groups:
+    por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c,
+    jtag, slic, pcm, asc1
+
+  functions:
+    rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm
+
+
+Definition of pin configurations:
+
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+  Valid values for these names are listed below.
+
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+    0: none, 1: down
+- lantiq,drive-current: Boolean, enables drive-current
+- lantiq,slew-rate: Boolean, enables slew-rate
+
+Example:
+	pinmux0 {
+		compatible = "lantiq,pinctrl-falcon";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			asc0 {
+				lantiq,groups = "asc0";
+				lantiq,function = "asc";
+			};
+			ntr {
+				lantiq,groups = "ntr8k";
+				lantiq,function = "ntr";
+			};
+			i2c {
+				lantiq,groups = "i2c";
+				lantiq,function = "i2c";
+			};
+			hrst {
+				lantiq,groups = "hrst";
+				lantiq,function = "rst";
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
new file mode 100644
index 0000000000..6bd9bc61be
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -0,0 +1,158 @@
+Lantiq XWAY pinmux controller
+
+Required properties:
+- compatible:	"lantiq,<chip>-pinctrl", where <chip> is:
+		"ase" (XWAY AMAZON Family)
+		"danube" (XWAY DANUBE Family)
+		"xrx100" (XWAY xRX100 Family)
+		"xrx200" (XWAY xRX200 Family)
+		"xrx300" (XWAY xRX300 Family)
+- reg: Should contain the physical address and length of the gpio/pinmux
+  register range
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+We support 2 types of nodes.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+  Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+  group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+
+AMAZON:
+  mux groups:
+    exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
+    spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
+    clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
+
+  functions:
+    spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
+
+DANUBE:
+  mux groups:
+    exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
+    ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
+    spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
+    gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
+    req1, req2, req3, dfe led0, dfe led1
+
+  functions:
+    spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
+
+xRX100:
+  mux groups:
+    exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+    ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+    spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+    spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
+    clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
+    dfe led0, dfe led1
+
+  functions:
+    spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
+
+xRX200:
+  mux groups:
+    exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+    ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+    spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+    spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
+    usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
+    usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
+    stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
+    gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
+    gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
+
+  functions:
+    spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
+
+xRX300:
+  mux groups:
+    exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
+    nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
+    nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
+    spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
+    usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
+    mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
+
+  functions:
+    spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
+
+
+Definition of pin configurations:
+
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+  Valid values for these names are listed below.
+
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+    0: none, 1: down, 2: up.
+- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
+
+Valid values for AMAZON pin names:
+  Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for DANUBE pin names:
+  Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for xRX100 pin names:
+  Pinconf pins can be referenced via the names io0-io55.
+
+Valid values for xRX200 pin names:
+  Pinconf pins can be referenced via the names io0-io49.
+
+Valid values for xRX300 pin names:
+  Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
+						io13-io19,io23-io27,io34-io36,
+						io42-io43,io48-io61.
+
+Example:
+	gpio: pinmux@e100b10 {
+		compatible = "lantiq,danube-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0xE100B10 0xA0>;
+
+		state_default: pinmux {
+			stp {
+				lantiq,groups = "stp";
+				lantiq,function = "stp";
+			};
+			pci {
+				lantiq,groups = "gnt1";
+				lantiq,function = "pci";
+			};
+			conf_out {
+				lantiq,pins = "io4", "io5", "io6"; /* stp */
+				lantiq,open-drain;
+				lantiq,pull = <0>;
+			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml
new file mode 100644
index 0000000000..bd8a458435
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/loongson,ls2k-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Pinctrl Controller
+
+maintainers:
+  - zhanghongchen <zhanghongchen@loongson.cn>
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    const: loongson,ls2k-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+
+    additionalProperties: false
+
+    patternProperties:
+      'pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        unevaluatedProperties: false
+
+        properties:
+          groups:
+            description:
+              One or more groups of pins to mux to a certain function
+            items:
+              enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
+                     nand, sata_led, i2s, hda]
+          function:
+            description:
+              The function that a group of pins is muxed to
+            enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
+                   nand, sata_led, i2s, hda]
+
+        required:
+          - groups
+          - function
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pctrl: pinctrl@1fe00420 {
+        compatible = "loongson,ls2k-pinctrl";
+        reg = <0x1fe00420 0x18>;
+        sdio_pins_default: sdio-pins {
+            sdio-pinmux {
+                groups = "sdio";
+                function = "sdio";
+            };
+
+            sdio-det-pinmux {
+                groups = "pwm2";
+                function = "gpio";
+            };
+        };
+
+        pwm1_pins_default: pwm1-pins {
+            pinmux {
+                groups = "pwm1";
+                function = "pwm1";
+            };
+        };
+
+        pwm0_pins_default: pwm0-pins {
+            pinmux {
+                groups = "pwm0";
+                function = "pwm0";
+            };
+        };
+
+        i2c1_pins_default: i2c1-pins {
+            pinmux {
+                groups = "i2c1";
+                function = "i2c1";
+            };
+        };
+
+        i2c0_pins_default: i2c0-pins {
+            pinmux {
+                groups = "i2c0";
+                function = "i2c0";
+            };
+        };
+
+        nand_pins_default: nand-pins {
+            pinmux {
+                groups = "nand";
+                function = "nand";
+            };
+        };
+
+        hda_pins_default: hda-pins {
+            grp0-pinmux {
+                groups = "hda";
+                function = "hda";
+            };
+
+            grp1-pinmux {
+                groups = "i2s";
+                function = "gpio";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
new file mode 100644
index 0000000000..afea9424c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell AC5 pin controller
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description:
+  Bindings for Marvell's AC5 memory-mapped pin controller.
+
+properties:
+  compatible:
+    items:
+      - const: marvell,ac5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      marvell,function:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Indicates the function to select.
+        enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio,
+                spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ]
+
+      marvell,pins:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        description:
+          Array of MPP pins to be used for the given function.
+        minItems: 1
+        items:
+          enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9,
+                  mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19,
+                  mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29,
+                  mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39,
+                  mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@80020100 {
+      compatible = "marvell,ac5-pinctrl";
+      reg = <0x80020100 0x20>;
+
+      i2c0_pins: i2c0-pins {
+        marvell,pins = "mpp26", "mpp27";
+        marvell,function = "i2c0";
+      };
+
+      i2c0_gpio: i2c0-gpio-pins {
+        marvell,pins = "mpp26", "mpp27";
+        marvell,function = "gpio";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 0000000000..8662f3aaf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,99 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, uart0(rxd)
+mpp1          1        gpo, uart0(txd)
+mpp2          2        gpio, i2c0(sck), uart0(txd)
+mpp3          3        gpio, i2c0(sda), uart0(rxd)
+mpp4          4        gpio, vdd(cpu-pd)
+mpp5          5        gpo, ge0(txclkout), uart1(txd), spi1(sck), audio(mclk)
+mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7          7        gpo, ge0(txd1), tdm(dtx), audio(lrclk)
+mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11         11       gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+                       sata1(prsnt), spi1(cs1)
+mpp12         12       gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp13         13       gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+                       audio(rmclk)
+mpp14         14       gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+                       spi0(cs2)
+mpp15         15       gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+                       spi0(cs3)
+mpp16         16       gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17         17       gpo, ge(mdc)
+mpp18         18       gpio, ge(mdio)
+mpp19         19       gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20         20       gpo, ge0(txd4), ge1(txd0)
+mpp21         21       gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22         22       gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23         23       gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24         24       gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25         25       gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26         26       gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27         27       gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28         28       gpio, ge0(rxd5), ge1(rxd3)
+mpp29         29       gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31         31       gpio, tclk, ge0(txerr)
+mpp32         32       gpio, spi0(cs0)
+mpp33         33       gpio, dev(bootcs), spi0(cs0)
+mpp34         34       gpo, dev(we0), spi0(mosi)
+mpp35         35       gpo, dev(oe), spi0(sck)
+mpp36         36       gpo, dev(a1), spi0(miso)
+mpp37         37       gpo, dev(a0), sata0(prsnt)
+mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39         39       gpo, dev(ad0), audio(spdifo)
+mpp40         40       gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41         41       gpio, dev(ad2), uart1(rxd)
+mpp42         42       gpo, dev(ad3), uart1(txd)
+mpp43         43       gpo, dev(ad4), audio(bclk)
+mpp44         44       gpo, dev(ad5), audio(mclk)
+mpp45         45       gpo, dev(ad6), audio(lrclk)
+mpp46         46       gpo, dev(ad7), audio(sdo)
+mpp47         47       gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48         48       gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+                       spi0(cs1)
+mpp49         49       gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+                       audio(spdifi)
+mpp50         50       gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+                       audio(rmclk)
+mpp51         51       gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52         52       gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53         53       gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+                       pcie(clkreq1)
+mpp54         54       gpo, dev(ad15), tdm(dtx)
+mpp55         55       gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+                       sata0(prsnt)
+mpp56         56       gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+                       pcie(clkreq0), spi1(cs1)
+mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+                       audio(sdo)
+mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+                       uart0(rts)
+mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rstout),
+                       audio(sdi)
+mpp61         61       gpo, dev(we1), uart1(txd), audio(lrclk)
+mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+                       audio(mclk), uart0(cts)
+mpp63         63       gpio, spi0(sck), tclk
+mpp64         64       gpio, spi0(miso), spi0(cs1)
+mpp65         65       gpio, spi0(mosi), spi0(cs2)
+
+Note: According to the datasheet mpp63 is a gpo but there is at least
+one example of a gpio usage on the board D-Link DNS-327L
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
new file mode 100644
index 0000000000..06e5bb0367
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
@@ -0,0 +1,82 @@
+* Marvell Armada 375 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6720-pinctrl"
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, dev(ad2), spi0(cs1), spi1(cs1)
+mpp1          1        gpio, dev(ad3), spi0(mosi), spi1(mosi)
+mpp2          2        gpio, dev(ad4), ptp(evreq), led(c0), audio(sdi)
+mpp3          3        gpio, dev(ad5), ptp(trig), led(p3), audio(mclk)
+mpp4          4        gpio, dev(ad6), spi0(miso), spi1(miso)
+mpp5          5        gpio, dev(ad7), spi0(cs2), spi1(cs2)
+mpp6          6        gpio, dev(ad0), led(p1), audio(lrclk)
+mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
+mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
+mpp9          9        gpio, spi0(sck), spi1(sck), nand(we)
+mpp10        10        gpio, dram(vttctrl), led(c1), nand(re)
+mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
+mpp12        12        gpio, dev(a1), audio(bclk)
+mpp13        13        gpio, dev(ready), pcie0(rstout), pcie1(rstout)
+mpp14        14        gpio, i2c0(sda), uart1(txd)
+mpp15        15        gpio, i2c0(sck), uart1(rxd)
+mpp16        16        gpio, uart0(txd)
+mpp17        17        gpio, uart0(rxd)
+mpp18        18        gpio, tdm(int)
+mpp19        19        gpio, tdm(rst)
+mpp20        20        gpio, tdm(pclk)
+mpp21        21        gpio, tdm(fsync)
+mpp22        22        gpio, tdm(drx)
+mpp23        23        gpio, tdm(dtx)
+mpp24        24        gpio, led(p0), ge1(rxd0), sd(cmd), uart0(rts)
+mpp25        25        gpio, led(p2), ge1(rxd1), sd(d0), uart0(cts)
+mpp26        26        gpio, pcie0(clkreq), ge1(rxd2), sd(d2), uart1(rts)
+mpp27        27        gpio, pcie1(clkreq), ge1(rxd3), sd(d1), uart1(cts)
+mpp28        28        gpio, led(p3), ge1(txctl), sd(clk)
+mpp29        29        gpio, pcie1(clkreq), ge1(rxclk), sd(d3)
+mpp30        30        gpio, ge1(txd0), spi1(cs0)
+mpp31        31        gpio, ge1(txd1), spi1(mosi)
+mpp32        32        gpio, ge1(txd2), spi1(sck), ptp(trig)
+mpp33        33        gpio, ge1(txd3), spi1(miso)
+mpp34        34        gpio, ge1(txclkout), spi1(sck)
+mpp35        35        gpio, ge1(rxctl), spi1(cs1), spi0(cs2)
+mpp36        36        gpio, pcie0(clkreq)
+mpp37        37        gpio, pcie0(clkreq), tdm(int), ge(mdc)
+mpp38        38        gpio, pcie1(clkreq), ge(mdio)
+mpp39        39        gpio, ref(clkout)
+mpp40        40        gpio, uart1(txd)
+mpp41        41        gpio, uart1(rxd)
+mpp42        42        gpio, spi1(cs2), led(c0)
+mpp43        43        gpio, sata0(prsnt), dram(vttctrl)
+mpp44        44        gpio, sata0(prsnt)
+mpp45        45        gpio, spi0(cs2), pcie0(rstout)
+mpp46        46        gpio, led(p0), ge0(txd0), ge1(txd0), dev(we1)
+mpp47        47        gpio, led(p1), ge0(txd1), ge1(txd1)
+mpp48        48        gpio, led(p2), ge0(txd2), ge1(txd2)
+mpp49        49        gpio, led(p3), ge0(txd3), ge1(txd3)
+mpp50        50        gpio, led(c0), ge0(rxd0), ge1(rxd0)
+mpp51        51        gpio, led(c1), ge0(rxd1), ge1(rxd1)
+mpp52        52        gpio, led(c2), ge0(rxd2), ge1(rxd2)
+mpp53        53        gpio, pcie1(rstout), ge0(rxd3), ge1(rxd3)
+mpp54        54        gpio, pcie0(rstout), ge0(rxctl), ge1(rxctl)
+mpp55        55        gpio, ge0(rxclk), ge1(rxclk)
+mpp56        56        gpio, ge0(txclkout), ge1(txclkout)
+mpp57        57        gpio, ge0(txctl), ge1(txctl), dev(we0)
+mpp58        58        gpio, led(c0)
+mpp59        59        gpio, led(c1)
+mpp60        60        gpio, uart1(txd), led(c2)
+mpp61        61        gpio, i2c1(sda), uart1(rxd), spi1(cs2), led(p0)
+mpp62        62        gpio, i2c1(sck), led(p1)
+mpp63        63        gpio, ptp(trig), led(p2), dev(burst/last)
+mpp64        64        gpio, dram(vttctrl), led(p3)
+mpp65        65        gpio, sata1(prsnt)
+mpp66        66        gpio, ptp(evreq), spi1(cs3)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
new file mode 100644
index 0000000000..ecec514b31
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -0,0 +1,195 @@
+* Marvell Armada 37xx SoC pin and gpio controller
+
+Each Armada 37xx SoC come with two pin and gpio controller one for the
+south bridge and the other for the north bridge.
+
+Inside this set of register the gpio latch allows exposing some
+configuration of the SoC and especially the clock frequency of the
+xtal. Hence, this node is a represent as syscon allowing sharing the
+register between multiple hardware block.
+
+GPIO and pin controller:
+------------------------
+
+Main node:
+
+Refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning
+of the phrase "pin configuration node".
+
+Required properties for pinctrl driver:
+
+- compatible:	"marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd"
+		for the south bridge
+		"marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd"
+		for the north bridge
+- reg: The first set of register are for pinctrl/gpio and the second
+  set for the interrupt controller
+- interrupts: list of the interrupt use by the gpio
+
+Available groups and functions for the North bridge:
+
+group: jtag
+ - pins 20-24
+ - functions jtag, gpio
+
+group sdio0
+ - pins 8-10
+ - functions sdio, gpio
+
+group emmc_nb
+ - pins 27-35
+ - functions emmc, gpio
+
+group pwm0
+ - pin 11 (GPIO1-11)
+ - functions pwm, led, gpio
+
+group pwm1
+ - pin 12
+ - functions pwm, led, gpio
+
+group pwm2
+ - pin 13
+ - functions pwm, led, gpio
+
+group pwm3
+ - pin 14
+ - functions pwm, led, gpio
+
+group pmic1
+ - pin 7
+ - functions pmic, gpio
+
+group pmic0
+ - pin 6
+ - functions pmic, gpio
+
+group i2c2
+ - pins 2-3
+ - functions i2c, gpio
+
+group i2c1
+ - pins 0-1
+ - functions i2c, gpio
+
+group spi_cs1
+ - pin 17
+ - functions spi, gpio
+
+group spi_cs2
+ - pin 18
+ - functions spi, gpio
+
+group spi_cs3
+ - pin 19
+ - functions spi, gpio
+
+group onewire
+ - pin 4
+ - functions onewire, gpio
+
+group uart1
+ - pins 25-26
+ - functions uart, gpio
+
+group spi_quad
+ - pins 15-16
+ - functions spi, gpio
+
+group uart2
+ - pins 9-10 and 18-19
+ - functions uart, gpio
+
+Available groups and functions for the South bridge:
+
+group usb32_drvvbus0
+ - pin 36
+ - functions drvbus, gpio
+
+group usb2_drvvbus1
+ - pin 37
+ - functions drvbus, gpio
+
+group sdio_sb
+ - pins 60-65
+ - functions sdio, gpio
+
+group rgmii
+ - pins 42-53
+ - functions mii, gpio
+
+group pcie1
+ - pins 39
+ - functions pcie, gpio
+
+group pcie1_clkreq
+ - pins 40
+ - functions pcie, gpio
+
+group pcie1_wakeup
+ - pins 41
+ - functions pcie, gpio
+
+group smi
+ - pins 54-55
+ - functions smi, gpio
+
+group ptp
+ - pins 56
+ - functions ptp, gpio
+
+group ptp_clk
+ - pin 57
+ - functions ptp, mii
+
+group ptp_trig
+ - pin 58
+ - functions ptp, mii
+
+group mii_col
+ - pin 59
+ - functions mii, mii_err
+
+GPIO subnode:
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+Required properties for gpio driver under the gpio subnode:
+- interrupts: List of interrupt specifier for the controllers interrupt.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+   second cell specifies GPIO flags, as defined in
+   <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and
+   GPIO_ACTIVE_LOW flags are supported.
+- gpio-ranges: Range of pins managed by the GPIO controller.
+
+Xtal Clock bindings for Marvell Armada 37xx SoCs
+------------------------------------------------
+
+see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+
+
+Example:
+pinctrl_sb: pinctrl-sb@18800 {
+	compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
+	reg = <0x18800 0x100>, <0x18C00 0x20>;
+	gpio {
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_sb 0 0 29>;
+		gpio-controller;
+		interrupts =
+		<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rgmii_pins: mii-pins {
+		groups = "rgmii";
+		function = "mii";
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
new file mode 100644
index 0000000000..54ec4c0a0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
@@ -0,0 +1,80 @@
+* Marvell Armada 380/385 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6810-pinctrl", "marvell,88f6820-pinctrl" or
+  "marvell,88f6828-pinctrl" depending on the specific variant of the
+  SoC being used.
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ua0(rxd)
+mpp1          1        gpio, ua0(txd)
+mpp2          2        gpio, i2c0(sck)
+mpp3          3        gpio, i2c0(sda)
+mpp4          4        gpio, ge(mdc), ua1(txd), ua0(rts)
+mpp5          5        gpio, ge(mdio), ua1(rxd), ua0(cts)
+mpp6          6        gpio, ge0(txclkout), ge0(crs), dev(cs3)
+mpp7          7        gpio, ge0(txd0), dev(ad9)
+mpp8          8        gpio, ge0(txd1), dev(ad10)
+mpp9          9        gpio, ge0(txd2), dev(ad11)
+mpp10         10       gpio, ge0(txd3), dev(ad12)
+mpp11         11       gpio, ge0(txctl), dev(ad13)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), dram(vttctrl), spi0(cs3), dev(we1), pcie3(clkreq)
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), dram(deccerr), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
+mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt), sata0(prsnt)
+mpp18         18       gpio, ge0(rxerr), ptp(trig), ua1(txd), spi0(cs0)
+mpp19         19       gpio, ge0(col), ptp(evreq), ge0(txerr), sata1(prsnt), ua0(cts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
+mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs), sata1(prsnt)
+mpp22         22       gpio, spi0(mosi), dev(ad0)
+mpp23         23       gpio, spi0(sck), dev(ad2)
+mpp24         24       gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
+mpp25         25       gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0)
+mpp26         26       gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
+mpp27         27       gpio, spi0(cs3), ge1(txclkout), i2c1(sda), sd0(d7), dev(cs2)
+mpp28         28       gpio, ge1(txd0), sd0(clk), dev(ad5)
+mpp29         29       gpio, ge1(txd1), dev(ale0)
+mpp30         30       gpio, ge1(txd2), dev(oe)
+mpp31         31       gpio, ge1(txd3), dev(ale1)
+mpp32         32       gpio, ge1(txctl), dev(we0)
+mpp33         33       gpio, dram(deccerr), dev(ad3)
+mpp34         34       gpio, dev(ad1)
+mpp35         35       gpio, ref(clk_out1), dev(a1)
+mpp36         36       gpio, ptp(trig), dev(a0)
+mpp37         37       gpio, ptp(clk), ge1(rxclk), sd0(d3), dev(ad8)
+mpp38         38       gpio, ptp(evreq), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4)
+mpp39         39       gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
+mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
+mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0)
+mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
+mpp43         43       gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout), ua1(rxd)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout), ua1(txd)
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
+mpp48         48       gpio, sata0(prsnt), dram(vttctrl), tdm(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
+mpp50         50       gpio, pcie0(rstout), tdm(drx), audio(extclk), sd0(cmd)
+mpp51         51       gpio, tdm(dtx), audio(sdo), dram(deccerr), ptp(trig)
+mpp52         52       gpio, pcie0(rstout), tdm(int), audio(sdi), sd0(d6), ptp(clk)
+mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm(rst), audio(bclk), sd0(d7), ptp(evreq)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
+mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0), ua1(rxd)
+mpp56         56       gpio, ua1(rts), ge(mdc), dram(deccerr), spi1(mosi), ua1(txd)
+mpp57         57       gpio, spi1(sck), sd0(clk), ua1(txd)
+mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
+
+[1]: only available on 88F6820 and 88F6828
+[2]: only available on 88F6828
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
new file mode 100644
index 0000000000..a40b60f1ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
@@ -0,0 +1,84 @@
+* Marvell Armada 39x SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6920-pinctrl", "marvell,88f6925-pinctrl" or
+  "marvell,88f6928-pinctrl" depending on the specific variant of the
+  SoC being used.
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name    pins    functions
+================================================================================
+mpp0	0	gpio, ua0(rxd)
+mpp1	1	gpio, ua0(txd)
+mpp2	2	gpio, i2c0(sck)
+mpp3	3	gpio, i2c0(sda)
+mpp4	4	gpio, ua1(txd), ua0(rts), smi(mdc)
+mpp5	5	gpio, ua1(rxd), ua0(cts), smi(mdio)
+mpp6	6	gpio, dev(cs3), xsmi(mdio)
+mpp7	7	gpio, dev(ad9), xsmi(mdc)
+mpp8	8	gpio, dev(ad10), ptp(trig)
+mpp9	9	gpio, dev(ad11), ptp(clk)
+mpp10	10	gpio, dev(ad12), ptp(evreq)
+mpp11	11	gpio, dev(ad13), led(clk)
+mpp12	12	gpio, pcie0(rstout), dev(ad14), led(stb)
+mpp13	13	gpio, dev(ad15), pcie2(clkreq), led(data)
+mpp14	14	gpio, dram(vttctrl), dev(we1), ua1(txd)
+mpp15	15	gpio, pcie0(rstout), spi0(mosi), i2c1(sck)
+mpp16	16	gpio, dram(deccerr), spi0(miso), pcie0(clkreq), i2c1(sda)
+mpp17	17	gpio, ua1(rxd), spi0(sck), sata1(prsnt) [1], sata0(prsnt) [1], smi(mdio)
+mpp18	18	gpio, ua1(txd), spi0(cs0), i2c2(sck)
+mpp19	19	gpio, sata1(prsnt) [1], ua0(cts), ua1(rxd), i2c2(sda)
+mpp20	20	gpio, sata0(prsnt) [1], ua0(rts), ua1(txd), smi(mdc)
+mpp21	21	gpio, spi0(cs1), sata0(prsnt) [1], sd0(cmd), dev(bootcs),
+                sata1(prsnt) [1], ge(rxd0)
+mpp22	22	gpio, spi0(mosi), dev(ad0)
+mpp23	23	gpio, spi0(sck), dev(ad2)
+mpp24	24	gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
+mpp25	25	gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0)
+mpp26	26	gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
+mpp27	27	gpio, spi0(cs3), i2c1(sda), sd0(d7), dev(cs2), ge(txclkout)
+mpp28	28	gpio, sd0(clk), dev(ad5), ge(txd0)
+mpp29	29	gpio, dev(ale0), ge(txd1)
+mpp30	30	gpio, dev(oe), ge(txd2)
+mpp31	31	gpio, dev(ale1), ge(txd3)
+mpp32	32	gpio, dev(we0), ge(txctl)
+mpp33	33	gpio, dram(deccerr), dev(ad3)
+mpp34	34	gpio, dev(ad1)
+mpp35	35	gpio, ref(clk), dev(a1)
+mpp36	36	gpio, dev(a0)
+mpp37	37	gpio, sd0(d3), dev(ad8), ge(rxclk)
+mpp38	38	gpio, ref(clk), sd0(d0), dev(ad4), ge(rxd1)
+mpp39	39	gpio, i2c1(sck), ua0(cts), sd0(d1), dev(a2), ge(rxd2)
+mpp40	40	gpio, i2c1(sda), ua0(rts), sd0(d2), dev(ad6), ge(rxd3)
+mpp41	41	gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0), ge(rxctl)
+mpp42	42	gpio, ua1(txd), ua0(rts), dev(ad7)
+mpp43	43	gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1)
+mpp44	44	gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2],
+                sata3(prsnt) [2], led(clk)
+mpp45	45	gpio, ref(clk), pcie0(rstout), ua1(rxd)
+mpp46	46	gpio, ref(clk), pcie0(rstout), ua1(txd), led(stb)
+mpp47	47	gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2],
+                sata3(prsnt) [2], led(data)
+mpp48	48	gpio, sata0(prsnt) [1], dram(vttctrl), tdm(pclk) [2], audio(mclk) [2], sd0(d4), pcie0(clkreq), ua1(txd)
+mpp49	49	gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync) [2],
+                audio(lrclk) [2], sd0(d5), ua2(rxd)
+mpp50	50	gpio, pcie0(rstout), tdm(drx) [2], audio(extclk) [2], sd0(cmd), ua2(rxd)
+mpp51	51	gpio, tdm(dtx) [2], audio(sdo) [2], dram(deccerr), ua2(txd)
+mpp52	52	gpio, pcie0(rstout), tdm(int) [2], audio(sdi) [2], sd0(d6), i2c3(sck)
+mpp53	53	gpio, sata1(prsnt) [1], sata0(prsnt) [1], tdm(rst) [2], audio(bclk) [2], sd0(d7), i2c3(sda)
+mpp54	54	gpio, sata0(prsnt) [1], sata1(prsnt) [1], pcie0(rstout), sd0(d3), ua3(txd)
+mpp55	55	gpio, ua1(cts), spi1(cs1), sd0(d0), ua1(rxd), ua3(rxd)
+mpp56	56	gpio, ua1(rts), dram(deccerr), spi1(mosi), ua1(txd)
+mpp57	57	gpio, spi1(sck), sd0(clk), ua1(txd)
+mpp58	58	gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd)
+mpp59	59	gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
+
+[1]: only available on 88F6925/88F6928
+[2]: only available on 88F6928
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
new file mode 100644
index 0000000000..97aef67ee7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell 98dx3236 pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage
+
+Required properties:
+- compatible: "marvell,98dx3236-pinctrl" or "marvell,98dx4251-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all 98dx3236, 98dx3336 and 98dx4251 variants
+
+name          pins     functions
+================================================================================
+mpp0          0        gpo, spi0(mosi), dev(ad8)
+mpp1          1        gpio, spi0(miso), dev(ad9)
+mpp2          2        gpo, spi0(sck), dev(ad10)
+mpp3          3        gpio, spi0(cs0), dev(ad11)
+mpp4          4        gpio, spi0(cs1), smi(mdc), dev(cs0)
+mpp5          5        gpio, pex(rsto), sd0(cmd), dev(bootcs)
+mpp6          6        gpo, sd0(clk), dev(a2)
+mpp7          7        gpio, sd0(d0), dev(ale0)
+mpp8          8        gpio, sd0(d1), dev(ale1)
+mpp9          9        gpio, sd0(d2), dev(ready0)
+mpp10         10       gpio, sd0(d3), dev(ad12)
+mpp11         11       gpio, uart1(rxd), uart0(cts), dev(ad13)
+mpp12         12       gpo, uart1(txd), uart0(rts), dev(ad14)
+mpp13         13       gpio, intr(out), dev(ad15)
+mpp14         14       gpio, i2c0(sck)
+mpp15         15       gpio, i2c0(sda)
+mpp16         16       gpo, dev(oe)
+mpp17         17       gpo, dev(clkout)
+mpp18         18       gpio, uart1(txd)
+mpp19         19       gpio, uart1(rxd), dev(rb)
+mpp20         20       gpo, dev(we0)
+mpp21         21       gpo, dev(ad0)
+mpp22         22       gpo, dev(ad1)
+mpp23         23       gpo, dev(ad2)
+mpp24         24       gpo, dev(ad3)
+mpp25         25       gpo, dev(ad4)
+mpp26         26       gpo, dev(ad5)
+mpp27         27       gpo, dev(ad6)
+mpp28         28       gpo, dev(ad7)
+mpp29         29       gpo, dev(a0)
+mpp30         30       gpo, dev(a1)
+mpp31         31       gpio, slv_smi(mdc), smi(mdc), dev(we1)
+mpp32         32       gpio, slv_smi(mdio), smi(mdio), dev(cs1)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
new file mode 100644
index 0000000000..76da7222ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -0,0 +1,99 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+              "marvell,mv78460-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ge0(txclkout), lcd(d0)
+mpp1          1        gpio, ge0(txd0), lcd(d1)
+mpp2          2        gpio, ge0(txd1), lcd(d2)
+mpp3          3        gpio, ge0(txd2), lcd(d3)
+mpp4          4        gpio, ge0(txd3), lcd(d4)
+mpp5          5        gpio, ge0(txctl), lcd(d5)
+mpp6          6        gpio, ge0(rxd0), lcd(d6)
+mpp7          7        gpio, ge0(rxd1), lcd(d7)
+mpp8          8        gpio, ge0(rxd2), lcd(d8)
+mpp9          9        gpio, ge0(rxd3), lcd(d9)
+mpp10         10       gpio, ge0(rxctl), lcd(d10)
+mpp11         11       gpio, ge0(rxclk), lcd(d11)
+mpp12         12       gpio, ge0(txd4), ge1(txclkout), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd0), spi1(mosi), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd1), spi1(sck), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd2), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), spi1(cs0), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), spi1(miso), lcd(d17)
+mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), dram(bat)
+mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync)
+mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk)
+mpp30         30       gpio, tdm(int1), sd0(clk)
+mpp31         31       gpio, tdm(int2), sd0(cmd)
+mpp32         32       gpio, tdm(int3), sd0(d0)
+mpp33         33       gpio, tdm(int4), sd0(d1), dram(bat), dram(vttctrl)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt), dram(deccerr)
+mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36         36       gpio, spi0(mosi)
+mpp37         37       gpio, spi0(miso)
+mpp38         38       gpio, spi0(sck)
+mpp39         39       gpio, spi0(cs0)
+mpp40         40       gpio, spi0(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0),
+                       spi1(cs1)
+mpp41         41       gpio, spi0(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1), spi1(cs2)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm(timer)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi0(cs3), pcie(rstout),
+                       spi1(cs3)
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi0(cs4), pcie(clkreq2),
+                       dram(bat), spi1(cs4)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi0(cs5), sata1(prsnt),
+                       spi1(cs5), dram(vttctrl)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi0(cs6), sata0(prsnt),
+                       spi1(cs6)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi0(cs7), pcie(clkreq3),
+                       ref(clkout), spi1(cs7)
+mpp48         48       gpio, dev(clkout), dev(burst/last), nand(rb)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name          pins     functions
+================================================================================
+mpp49         49       gpio, dev(we3)
+mpp50         50       gpio, dev(we2)
+mpp51         51       gpio, dev(ad16)
+mpp52         52       gpio, dev(ad17)
+mpp53         53       gpio, dev(ad18)
+mpp54         54       gpio, dev(ad19)
+mpp55         55       gpio, dev(ad20)
+mpp56         56       gpio, dev(ad21)
+mpp57         57       gpio, dev(ad22)
+mpp58         58       gpio, dev(ad23)
+mpp59         59       gpio, dev(ad24)
+mpp60         60       gpio, dev(ad25)
+mpp61         61       gpio, dev(ad26)
+mpp62         62       gpio, dev(ad27)
+mpp63         63       gpio, dev(ad28)
+mpp64         64       gpio, dev(ad29)
+mpp65         65       gpio, dev(ad30)
+mpp66         66       gpio, dev(ad31)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 0000000000..cf52477cc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,90 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+- reg: register specifiers of MPP, MPP4, and PMU MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+Note: pmu* also allows for Power Management functions listed below
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm), pmu*
+mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu*
+mpp2          2        gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+                       uart1(rts), pmu*
+mpp3          3        gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+                       uart1(cts), lcd-spi(cs1), pmu*
+mpp4          4        gpio, pmu, uart3(rts), sdio1(cd), spi1(miso), pmu*
+mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs), pmu*
+mpp6          6        gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi), pmu*
+mpp7          7        gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck), pmu*
+mpp8          8        gpio, pmu, watchdog(rstout), pmu*
+mpp9          9        gpio, pmu, pex1(clkreq), pmu*
+mpp10         10       gpio, pmu, ssp(sclk), pmu*
+mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+                       sdio1(ledctrl), pex0(clkreq), pmu*
+mpp12         12       gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd),
+                       sata(act), pmu*
+mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+                       ssp(extclk), pmu*
+mpp14         14       gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd), pmu*
+mpp15         15       gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm), pmu*
+mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+                       ac97-1(sysclko)
+mpp18         18       gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19         19       gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+                       ac97(sysclko)
+mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+                       uart1(cts), ssp(sfrm)
+mpp22         22       gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+                       lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23         23       gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+                       lcd-spi(sck), ssp(sclk)
+mpp_camera    24-39    gpio, camera
+mpp_sdio0     40-45    gpio, sdio0
+mpp_sdio1     46-51    gpio, sdio1
+mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+                       ssp/twsi
+mpp_spi0      58-61    gpio, spi0
+mpp_uart1     62-63    gpio, uart1
+mpp_nand      64-71    gpo, nand
+audio0        -        i2s, ac97
+twsi          -        none, opt1, opt2, opt3
+
+Power Management functions (pmu*):
+pmu-nc               Pin not driven by any PM function
+pmu-low              Pin driven low (0)
+pmu-high             Pin driven high (1)
+pmic(sdi)            Pin is used for PMIC SDI
+cpu-pwr-down         Pin is used for CPU_PWRDWN
+standby-pwr-down     Pin is used for STBY_PWRDWN
+core-pwr-good        Pin is used for CORE_PWR_GOOD (Pins 0-7 only)
+cpu-pwr-good         Pin is used for CPU_PWR_GOOD (Pins 8-15 only)
+bat-fault            Pin is used for BATTERY_FAULT
+ext0-wakeup          Pin is used for EXT0_WU
+ext1-wakeup          Pin is used for EXT0_WU
+ext2-wakeup          Pin is used for EXT0_WU
+pmu-blink            Pin is used for blink function
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+  - gpio          : gpio on pins 52-57
+  - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+  - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
+  - spdifo        : spdifo on pin 57, gpio on pins 52-55
+  - twsi          : twsi on pins 56,57, gpio on pins 52-55
+  - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
+  - ssp           : ssp on pins 52-55, gpio on pins 56,57
+  - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+  audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 0000000000..2932f171ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,359 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+              "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+              "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl",
+              "marvell,98dx4122-pinctrl", "marvell,98dx1135-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp35         35       gpio, mii(rxerr)
+mpp36         36       gpio, audio(spdifi)
+mpp37         37       gpio, audio(spdifo)
+mpp38         38       gpio, audio(rmclk)
+mpp39         39       gpio, audio(bclk)
+mpp40         40       gpio, audio(sdo)
+mpp41         41       gpio, audio(lrclk)
+mpp42         42       gpio, audio(mclk)
+mpp43         43       gpio, audio(sdi)
+mpp44         44       gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0)
+mpp21         21       gpio, ge1(txd1), sata0(act)
+mpp22         22       gpio, ge1(txd2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt)
+mpp24         24       gpio, ge1(rxd0)
+mpp25         25       gpio, ge1(rxd1)
+mpp26         26       gpio, ge1(rxd2)
+mpp27         27       gpio, ge1(rxd3)
+mpp28         28       gpio, ge1(col)
+mpp29         29       gpio, ge1(txclk)
+mpp30         30       gpio, ge1(rxclk)
+mpp31         31       gpio, ge1(rxclk)
+mpp32         32       gpio, ge1(txclko)
+mpp33         33       gpo, ge1(txclk)
+mpp34         34       gpio, ge1(txen)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpo, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5          5        gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6          6        sysrst(out), spi(mosi), ptp(trig)
+mpp7          7        gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+                       mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+                       mii(crs), sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+                       ptp-2(trig), sata0(act)
+mpp12         12       gpio, sdio(clk)
+mpp13         13       gpio, sdio(cmd), uart1(txd)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act)
+mpp17         17       gpio, sdio(d3), sata0(prsnt)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33         33       gpo, ge1(txclk), tdm(drx)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45         45       gpio, ts(mp9), tdm(pclk)
+mpp46         46       gpio, ts(mp10), tdm(fs)
+mpp47         47       gpio, ts(mp11), tdm(drx)
+mpp48         48       gpio, ts(mp12), tdm(dtx)
+mpp49         49       gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5          5        gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, spi(cs), lcd(pwm)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+                       mii-1(rxerr), sata1(prsnt)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+                       sata0(prsnt)
+mpp10         10       gpo, spi(sck), uart0(txd), sata1(act)
+mpp11         11       gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12         12       gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13         13       gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14         14       gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+                       audio(spdifi), audio-1(sdi)
+mpp15         15       gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+                       spi(cs)
+mpp16         16       gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+                       sata1(act), lcd(extclk)
+mpp17         17       gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18         18       gpo, nand(io0), pex(clkreq)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+                       sata1(act), lcd(d0)
+mpp21         21       gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+                       audio(spdifo), lcd(d1)
+mpp22         22       gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+                       sata1(prsnt), lcd(d2)
+mpp23         23       gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+                       audio(bclk), lcd(d3)
+mpp24         24       gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+                       lcd(d4)
+mpp25         25       gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+                       lcd(d5)
+mpp26         26       gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+                       lcd(d6)
+mpp27         27       gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+                       lcd(d7)
+mpp28         28       gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+                       lcd(d8)
+mpp29         29       gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30         30       gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31         31       gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32         32       gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33         33       gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34         34       gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35         35       gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+                       lcd(d15)
+mpp36         36       gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37         37       gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38         38       gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39         39       gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40         40       gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41         41       gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42         42       gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43         43       gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44         44       gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45         45       gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46         46       gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47         47       gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48         48       gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49         49       gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
+
+* Marvell Bobcat 98dx4122
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd)
+mpp5          5        gpo, nand(io7), uart0(txd)
+mpp6          6        sysrst(out), spi(mosi)
+mpp7          7        gpo, pex(rsto), spi(cs)
+mpp8          8        gpio, twsi0(sda), uart0(rts), uart1(rts)
+mpp9          9        gpio, twsi(sck), uart0(cts), uart1(cts)
+mpp10         10       gpo, spi(sck), uart0(txd)
+mpp11         11       gpio, spi(miso), uart0(rxd)
+mpp13         13       gpio, uart1(txd)
+mpp14         14       gpio, uart1(rxd)
+mpp15         15       gpio, uart0(rts)
+mpp16         16       gpio, uart0(cts)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp34         34       gpio
+mpp35         35       gpio
+mpp36         36       gpio
+mpp37         37       gpio
+mpp38         38       gpio
+mpp39         39       gpio
+mpp40         40       gpio
+mpp41         41       gpio
+mpp42         42       gpio
+mpp43         43       gpio
+mpp44         44       gpio
+mpp45         45       gpio
+mpp49         49       gpio
+
+* Marvell Poncat2 98dx1135
+
+name          pins     functions
+================================================================================
+
+mpp0          0        gpio, nand(io2), spi(cs)
+mpp1          1        gpo, nand(io3), spi(mosi)
+mpp2          2        gpo, nand(io4), spi(sck)
+mpp3          3        gpo, nand(io5), spi(miso)
+mpp4          4        gpio, nand(io6), uart0(rxd)
+mpp5          5        gpo, nand(io7), uart0(txd)
+mpp6          6        sysrst(out)
+mpp7          7        gpo, spi(cs)
+mpp8          8        gpio, twsi0(sda), uart1(rts)
+mpp9          9        gpio, twsi(sck), uart1(cts)
+mpp10         10       gpo, uart0(txd)
+mpp11         11       gpio, uart0(rxd)
+mpp13         13       gpio, uart1(txd)
+mpp14         14       gpio, uart1(rxd)
+mpp15         15       gpio, uart0(rts)
+mpp16         16       gpio, uart0(cts)
+mpp17         17       gpio, nand(cle)
+mpp18         18       gpo, nand(io0)
+mpp19         19       gpo, nand(io1)
+mpp20         20       gpio
+mpp21         21       gpio
+mpp22         22       gpio
+mpp23         23       gpio
+mpp24         24       gpio
+mpp25         25       gpio
+mpp26         26       gpio
+mpp27         27       gpio
+mpp28         28       gpio, nand(ren)
+mpp29         29       gpio, nand(wen)
+mpp30         30       gpio
+mpp31         31       gpio
+mpp32         32       gpio
+mpp33         33       gpio
+mpp34         34       gpio, nand(ale)
+mpp35         35       gpio, nand(cen)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
new file mode 100644
index 0000000000..0c09f4eb2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+	pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x14>, <0xd0440 0x04>, <0xd802c 0x08>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
new file mode 100644
index 0000000000..ec8aa3c693
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
@@ -0,0 +1,93 @@
+* Marvell Orion SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f5181-pinctrl",
+              "marvell,88f5181l-pinctrl",
+              "marvell,88f5182-pinctrl",
+              "marvell,88f5281-pinctrl"
+
+- reg: two register areas, the first one describing the first two
+  contiguous MPP registers, and the second one describing the single
+  final MPP register, separated from the previous one.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Orion 88f5181l
+
+name          pins     functions
+================================================================================
+mpp0          0        pcie(rstout), pci(req2), gpio
+mpp1          1        gpio, pci(gnt2)
+mpp2          2        gpio, pci(req3), pci-1(pme)
+mpp3          3        gpio, pci(gnt3)
+mpp4          4        gpio, pci(req4)
+mpp5          5        gpio, pci(gnt4)
+mpp6          6        gpio, pci(req5), pci-1(clk)
+mpp7          7        gpio, pci(gnt5), pci-1(clk)
+mpp8          8        gpio, ge(col)
+mpp9          9        gpio, ge(rxerr)
+mpp10         10       gpio, ge(crs)
+mpp11         11       gpio, ge(txerr)
+mpp12         12       gpio, ge(txd4)
+mpp13         13       gpio, ge(txd5)
+mpp14         14       gpio, ge(txd6)
+mpp15         15       gpio, ge(txd7)
+mpp16         16       ge(rxd4)
+mpp17         17       ge(rxd5)
+mpp18         18       ge(rxd6)
+mpp19         19       ge(rxd7)
+
+* Marvell Orion 88f5182
+
+name          pins     functions
+================================================================================
+mpp0          0        pcie(rstout), pci(req2), gpio
+mpp1          1        gpio, pci(gnt2)
+mpp2          2        gpio, pci(req3), pci-1(pme)
+mpp3          3        gpio, pci(gnt3)
+mpp4          4        gpio, pci(req4), bootnand(re), sata0(prsnt)
+mpp5          5        gpio, pci(gnt4), bootnand(we), sata1(prsnt)
+mpp6          6        gpio, pci(req5), nand(re0), sata0(act)
+mpp7          7        gpio, pci(gnt5), nand(we0), sata1(act)
+mpp8          8        gpio, ge(col)
+mpp9          9        gpio, ge(rxerr)
+mpp10         10       gpio, ge(crs)
+mpp11         11       gpio, ge(txerr)
+mpp12         12       gpio, ge(txd4), nand(re1), sata0(ledprsnt)
+mpp13         13       gpio, ge(txd5), nand(we1), sata1(ledprsnt)
+mpp14         14       gpio, ge(txd6), nand(re2), sata0(ledact)
+mpp15         15       gpio, ge(txd7), nand(we2), sata1(ledact)
+mpp16         16       uart1(rxd), ge(rxd4), gpio
+mpp17         17       uart1(txd), ge(rxd5), gpio
+mpp18         18       uart1(cts), ge(rxd6), gpio
+mpp19         19       uart1(rts), ge(rxd7), gpio
+
+* Marvell Orion 88f5281
+
+name          pins     functions
+================================================================================
+mpp0          0        pcie(rstout), pci(req2), gpio
+mpp1          1        gpio, pci(gnt2)
+mpp2          2        gpio, pci(req3), pci(pme)
+mpp3          3        gpio, pci(gnt3)
+mpp4          4        gpio, pci(req4), bootnand(re)
+mpp5          5        gpio, pci(gnt4), bootnand(we)
+mpp6          6        gpio, pci(req5), nand(re0)
+mpp7          7        gpio, pci(gnt5), nand(we0)
+mpp8          8        gpio, ge(col)
+mpp9          9        gpio, ge(rxerr)
+mpp10         10       gpio, ge(crs)
+mpp11         11       gpio, ge(txerr)
+mpp12         12       gpio, ge(txd4), nand(re1)
+mpp13         13       gpio, ge(txd5), nand(we1)
+mpp14         14       gpio, ge(txd6), nand(re2)
+mpp15         15       gpio, ge(txd7), nand(we2)
+mpp16         16       uart1(rxd), ge(rxd4)
+mpp17         17       uart1(txd), ge(rxd5)
+mpp18         18       uart1(cts), ge(rxd6)
+mpp19         19       uart1(rts), ge(rxd7)
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
new file mode 100644
index 0000000000..bccff08a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT65xx Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description:
+  The MediaTek's MT65xx Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-pinctrl
+      - mediatek,mt2712-pinctrl
+      - mediatek,mt6397-pinctrl
+      - mediatek,mt7623-pinctrl
+      - mediatek,mt8127-pinctrl
+      - mediatek,mt8135-pinctrl
+      - mediatek,mt8167-pinctrl
+      - mediatek,mt8173-pinctrl
+      - mediatek,mt8516-pinctrl
+
+  reg:
+    maxItems: 1
+
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Specify the subnodes are using numbered pinmux to specify pins. (UNUSED)
+    deprecated: true
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  mediatek,pctl-regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    minItems: 1
+    maxItems: 2
+    description:
+      Should be phandles of the syscfg node.
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+patternProperties:
+  'pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '(^pins|pins?$)':
+        type: object
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up:
+            description:
+              Besides generic pinconfig options, it can be used as the pull up
+              settings for 2 pull resistors, R0 and R1. User can configure those
+              special pins. Some macros have been defined for this usage, such
+              as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
+              valid arguments.
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            description:
+              Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
+              etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        syscfg_pctl_a: syscfg-pctl-a@10005000 {
+          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+          reg = <0 0x10005000 0 0x1000>;
+        };
+
+        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
+          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+          reg = <0 0x1020C020 0 0x1000>;
+        };
+
+        pinctrl@1c20800 {
+          compatible = "mediatek,mt8135-pinctrl";
+          reg = <0 0x1000B000 0 0x1000>;
+          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+          i2c0_pins_a: i2c0-pins {
+            pins1 {
+              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+              bias-disable;
+            };
+          };
+
+          i2c1_pins_a: i2c1-pins {
+            pins {
+              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+          };
+
+          i2c2_pins_a: i2c2-pins {
+            pins1 {
+              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+              bias-pull-down;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+              bias-pull-up;
+            };
+          };
+
+          i2c3_pins_a: i2c3-pins {
+            pins1 {
+              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
+                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
+                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
+              output-low;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins3 {
+              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
+                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
+              drive-strength = <32>;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
new file mode 100644
index 0000000000..3bbc00df55
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -0,0 +1,253 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6779 Pin Controller
+
+maintainers:
+  - Andy Teng <andy.teng@mediatek.com>
+  - Sean Wang <sean.wang@kernel.org>
+
+description:
+  The MediaTek pin controller on MT6779 is used to control pin functions, pull
+  up/down resistance and drive strength options.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-pinctrl
+      - mediatek,mt6797-pinctrl
+
+  reg:
+    description: Physical addresses for GPIO base(s) and EINT registers.
+
+  reg-names: true
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description:
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specifies the summary IRQ.
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6779-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 9
+          maxItems: 9
+
+        reg-names:
+          items:
+            - const: gpio
+            - const: iocfg_rm
+            - const: iocfg_br
+            - const: iocfg_lm
+            - const: iocfg_lb
+            - const: iocfg_rt
+            - const: iocfg_lt
+            - const: iocfg_tl
+            - const: eint
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6797-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+
+        reg-names:
+          items:
+            - const: gpio
+            - const: iocfgl
+            - const: iocfgb
+            - const: iocfgr
+            - const: iocfgt
+  - if:
+      properties:
+        reg-names:
+          contains:
+            const: eint
+    then:
+      required:
+        - interrupts
+        - interrupt-controller
+        - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]*$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-pins*$':
+        type: object
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6779-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                <0 0x11c20000 0 0x1000>,
+                <0 0x11d10000 0 0x1000>,
+                <0 0x11e20000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11ea0000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+            reg-names = "gpio", "iocfg_rm",
+              "iocfg_br", "iocfg_lm",
+              "iocfg_lb", "iocfg_rt",
+              "iocfg_lt", "iocfg_tl",
+              "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 210>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+
+            mmc0_pins_default: mmc0-0 {
+                cmd-dat-pins {
+                    pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
+                        <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
+                        <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
+                        <PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
+                        <PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
+                        <PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
+                        <PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
+                        <PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
+                        <PINMUX_GPIO167__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    mediatek,pull-up-adv = <1>;
+                };
+                clk-pins {
+                    pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
+                    mediatek,pull-down-adv = <2>;
+                };
+                rst-pins {
+                    pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
+                    mediatek,pull-up-adv = <0>;
+                };
+            };
+        };
+
+        mmc0 {
+           pinctrl-0 = <&mmc0_pins_default>;
+           pinctrl-names = "default";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml
new file mode 100644
index 0000000000..68e91c05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6795-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6795 Pin Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Sean Wang <sean.wang@kernel.org>
+
+description:
+  The MediaTek's MT6795 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6795-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: GPIO valid number range.
+    maxItems: 1
+
+  reg:
+    description:
+      Physical address base for GPIO base and eint registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: Interrupt outputs to the system interrupt controller (sysirq).
+    minItems: 1
+    items:
+      - description: EINT interrupt
+      - description: EINT event_b interrupt
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO45 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: pinmux-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull down PUPD/R0/R1 type define value.
+            description:
+              For normal pull down type, it is not necessary to specify R1R0
+              values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+              will set different resistance values.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull up PUPD/R0/R1 type define value.
+            description:
+              For normal pull up type, it is not necessary to specify R1R0
+              values; When pull up type is PUPD/R0/R1, adding R1R0 defines will
+              set different resistance values.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6795-pinctrl";
+            reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+            reg-names = "base", "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 196>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+
+            i2c0-pins {
+                pins-sda-scl {
+                    pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+                             <PINMUX_GPIO46__FUNC_SCL0>;
+                };
+            };
+
+            mmc0-pins {
+                pins-cmd-dat {
+                    pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+                             <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+                             <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+                             <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+                             <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+                             <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+                             <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+                             <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+                             <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+                };
+
+                pins-clk {
+                    pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+                    bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+                };
+
+                pins-rst {
+                    pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml
new file mode 100644
index 0000000000..591bc0664e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml
@@ -0,0 +1,298 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7620 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MT7620 pin controller for MT7620 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7620-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand,
+                   pa, pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+                   refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
+                   wdt refclk, wdt rst, wled]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: ephy
+            then:
+              properties:
+                groups:
+                  enum: [ephy]
+
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi,
+                         spi refclk, uartf, uartlite, wdt, wled]
+
+          - if:
+              properties:
+                function:
+                  const: gpio i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: gpio uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: nand
+            then:
+              properties:
+                groups:
+                  enum: [nd_sd]
+
+          - if:
+              properties:
+                function:
+                  const: pa
+            then:
+              properties:
+                groups:
+                  enum: [pa]
+
+          - if:
+              properties:
+                function:
+                  const: pcie refclk
+            then:
+              properties:
+                groups:
+                  enum: [pcie]
+
+          - if:
+              properties:
+                function:
+                  const: pcie rst
+            then:
+              properties:
+                groups:
+                  enum: [pcie]
+
+          - if:
+              properties:
+                function:
+                  const: pcm gpio
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: refclk
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: rgmii1
+            then:
+              properties:
+                groups:
+                  enum: [rgmii1]
+
+          - if:
+              properties:
+                function:
+                  const: rgmii2
+            then:
+              properties:
+                groups:
+                  enum: [rgmii2]
+
+          - if:
+              properties:
+                function:
+                  const: sd
+            then:
+              properties:
+                groups:
+                  enum: [nd_sd]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: spi refclk
+            then:
+              properties:
+                groups:
+                  enum: [spi refclk]
+
+          - if:
+              properties:
+                function:
+                  const: uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: uartlite
+            then:
+              properties:
+                groups:
+                  enum: [uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: wdt refclk
+            then:
+              properties:
+                groups:
+                  enum: [wdt]
+
+          - if:
+              properties:
+                function:
+                  const: wdt rst
+            then:
+              properties:
+                groups:
+                  enum: [wdt]
+
+          - if:
+              properties:
+                function:
+                  const: wled
+            then:
+              properties:
+                groups:
+                  enum: [wled]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,mt7620-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml
new file mode 100644
index 0000000000..e568b9c137
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MT7621 pin controller for MT7621 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7621-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
+                   pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi,
+                   uart1, uart2, uart3, wdt refclk, wdt rst]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
+                         uart1, uart2, uart3, wdt]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s
+            then:
+              properties:
+                groups:
+                  enum: [uart3]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag]
+
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: nand1
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: nand2
+            then:
+              properties:
+                groups:
+                  enum: [sdhci]
+
+          - if:
+              properties:
+                function:
+                  const: pcie refclk
+            then:
+              properties:
+                groups:
+                  enum: [pcie]
+
+          - if:
+              properties:
+                function:
+                  const: pcie rst
+            then:
+              properties:
+                groups:
+                  enum: [pcie]
+
+          - if:
+              properties:
+                function:
+                  const: pcm
+            then:
+              properties:
+                groups:
+                  enum: [uart2]
+
+          - if:
+              properties:
+                function:
+                  const: rgmii1
+            then:
+              properties:
+                groups:
+                  enum: [rgmii1]
+
+          - if:
+              properties:
+                function:
+                  const: rgmii2
+            then:
+              properties:
+                groups:
+                  enum: [rgmii2]
+
+          - if:
+              properties:
+                function:
+                  const: sdhci
+            then:
+              properties:
+                groups:
+                  enum: [sdhci]
+
+          - if:
+              properties:
+                function:
+                  const: spdif2
+            then:
+              properties:
+                groups:
+                  enum: [uart2]
+
+          - if:
+              properties:
+                function:
+                  const: spdif3
+            then:
+              properties:
+                groups:
+                  enum: [uart3]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: uart1
+            then:
+              properties:
+                groups:
+                  enum: [uart1]
+
+          - if:
+              properties:
+                function:
+                  const: uart2
+            then:
+              properties:
+                groups:
+                  enum: [uart2]
+
+          - if:
+              properties:
+                function:
+                  const: uart3
+            then:
+              properties:
+                groups:
+                  enum: [uart3]
+
+          - if:
+              properties:
+                function:
+                  const: wdt refclk
+            then:
+              properties:
+                groups:
+                  enum: [wdt]
+
+          - if:
+              properties:
+                function:
+                  const: wdt rst
+            then:
+              properties:
+                groups:
+                  enum: [wdt]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,mt7621-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
new file mode 100644
index 0000000000..bd72a326e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -0,0 +1,376 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7622 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description:
+  The MediaTek's MT7622 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-pinctrl
+      - mediatek,mt7629-pinctrl
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required:
+    - interrupt-controller
+then:
+  required:
+    - reg-names
+    - interrupts
+    - "#interrupt-cells"
+
+patternProperties:
+  '-pins(-[a-z]+)?$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^mux(-|$)':
+        type: object
+        additionalProperties: false
+        description:
+          pinmux configuration nodes.
+        $ref: /schemas/pinctrl/pinmux-node.yaml
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
+                   spi, tdm, uart, watchdog, wifi]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+
+          drive-strength:
+            enum: [4, 8, 12, 16]
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
+                         i2c2_1, i2c2_2]
+          - if:
+              properties:
+                function:
+                  const: i2s
+            then:
+              properties:
+                groups:
+                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                         i2s4_out_data]
+          - if:
+              properties:
+                function:
+                  const: ir
+            then:
+              properties:
+                groups:
+                  enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
+                         ephy4_led, wled, wf2g_led, wf5g_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [par_nand, snfi, spi_nor]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                         pcie_wake, pcie_clkreq]
+          - if:
+              properties:
+                function:
+                  const: pmic
+            then:
+              properties:
+                groups:
+                  enum: [pmic_bus]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                         pwm_ch7_0, pwm_0, pwm_1]
+          - if:
+              properties:
+                function:
+                  const: sd
+            then:
+              properties:
+                groups:
+                  enum: [sd_0, sd_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
+                         spic2_0, spi_0, spi_1, spi_wp, spi_hold]
+          - if:
+              properties:
+                function:
+                  const: tdm
+            then:
+              properties:
+                groups:
+                  enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
+                         tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
+                         tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
+                         uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
+                         uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
+                         uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
+                         uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
+                         uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
+                         uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
+                         uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
+                         uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
+                         uart2_1_txd_rxd, uart2_1_cts_rts]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  enum: [wf0_2g, wf0_5g]
+
+      '^conf(-|$)':
+        type: object
+        additionalProperties: false
+        description:
+          pinconf configuration nodes.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+              Valid values are the same as the pinmux node.
+
+          pins:
+            description:
+              An array of strings. Each string contains the name of a pin.
+            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,tdsel:
+            description:
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description:
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10211000 {
+          compatible = "mediatek,mt7622-pinctrl";
+          reg = <0 0x10211000 0 0x1000>;
+          gpio-controller;
+          #gpio-cells = <2>;
+
+          pinctrl_eth_default: eth-pins {
+            mux-mdio {
+              groups = "mdc_mdio";
+              function = "eth";
+              drive-strength = <12>;
+            };
+
+            mux-gmac2 {
+              groups = "rgmii_via_gmac2";
+              function = "eth";
+              drive-strength = <12>;
+            };
+
+            mux-esw {
+              groups = "esw";
+              function = "eth";
+              drive-strength = <8>;
+            };
+
+            conf-mdio {
+              pins = "MDC";
+              bias-pull-up;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml
new file mode 100644
index 0000000000..31849dd594
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml
@@ -0,0 +1,450 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt76x8-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT76X8 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  MediaTek MT76X8 pin controller for MT7628 and MT7688 SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt76x8-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn,
+                   p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
+                   p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
+                   pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7,
+                   spi, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt,
+                   wled_an, wled_kn, -]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: antenna
+            then:
+              properties:
+                groups:
+                  enum: [i2s]
+
+          - if:
+              properties:
+                function:
+                  const: debug
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn,
+                         p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an,
+                         p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi,
+                         spi cs1, spis, uart0, uart1, uart2, wdt, wled_an,
+                         wled_kn]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s
+            then:
+              properties:
+                groups:
+                  enum: [i2s]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+                         p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn,
+                         sdmode]
+
+          - if:
+              properties:
+                function:
+                  const: p0led_an
+            then:
+              properties:
+                groups:
+                  enum: [p0led_an]
+
+          - if:
+              properties:
+                function:
+                  const: p0led_kn
+            then:
+              properties:
+                groups:
+                  enum: [p0led_kn]
+
+          - if:
+              properties:
+                function:
+                  const: p1led_an
+            then:
+              properties:
+                groups:
+                  enum: [p1led_an]
+
+          - if:
+              properties:
+                function:
+                  const: p1led_kn
+            then:
+              properties:
+                groups:
+                  enum: [p1led_kn]
+
+          - if:
+              properties:
+                function:
+                  const: p2led_an
+            then:
+              properties:
+                groups:
+                  enum: [p2led_an]
+
+          - if:
+              properties:
+                function:
+                  const: p2led_kn
+            then:
+              properties:
+                groups:
+                  enum: [p2led_kn]
+
+          - if:
+              properties:
+                function:
+                  const: p3led_an
+            then:
+              properties:
+                groups:
+                  enum: [p3led_an]
+
+          - if:
+              properties:
+                function:
+                  const: p3led_kn
+            then:
+              properties:
+                groups:
+                  enum: [p3led_kn]
+
+          - if:
+              properties:
+                function:
+                  const: p4led_an
+            then:
+              properties:
+                groups:
+                  enum: [p4led_an]
+
+          - if:
+              properties:
+                function:
+                  const: p4led_kn
+            then:
+              properties:
+                groups:
+                  enum: [p4led_kn]
+
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [gpio]
+
+          - if:
+              properties:
+                function:
+                  const: pcm
+            then:
+              properties:
+                groups:
+                  enum: [i2s]
+
+          - if:
+              properties:
+                function:
+                  const: perst
+            then:
+              properties:
+                groups:
+                  enum: [perst]
+
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [uart1, uart2]
+
+          - if:
+              properties:
+                function:
+                  const: pwm0
+            then:
+              properties:
+                groups:
+                  enum: [pwm0]
+
+          - if:
+              properties:
+                function:
+                  const: pwm1
+            then:
+              properties:
+                groups:
+                  enum: [pwm1]
+
+          - if:
+              properties:
+                function:
+                  const: pwm_uart2
+            then:
+              properties:
+                groups:
+                  enum: [spis]
+
+          - if:
+              properties:
+                function:
+                  const: refclk
+            then:
+              properties:
+                groups:
+                  enum: [gpio, refclk, spi cs1]
+
+          - if:
+              properties:
+                function:
+                  const: rsvd
+            then:
+              properties:
+                groups:
+                  enum: [p0led_an, p0led_kn, wled_an, wled_kn]
+
+          - if:
+              properties:
+                function:
+                  const: sdxc
+            then:
+              properties:
+                groups:
+                  enum: [sdmode]
+
+          - if:
+              properties:
+                function:
+                  const: sdxc d5 d4
+            then:
+              properties:
+                groups:
+                  enum: [uart2]
+
+          - if:
+              properties:
+                function:
+                  const: sdxc d6
+            then:
+              properties:
+                groups:
+                  enum: [pwm1]
+
+          - if:
+              properties:
+                function:
+                  const: sdxc d7
+            then:
+              properties:
+                groups:
+                  enum: [pwm0]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: spi cs1
+            then:
+              properties:
+                groups:
+                  enum: [spi cs1]
+
+          - if:
+              properties:
+                function:
+                  const: spis
+            then:
+              properties:
+                groups:
+                  enum: [spis]
+
+          - if:
+              properties:
+                function:
+                  const: sw_r
+            then:
+              properties:
+                groups:
+                  enum: [uart1]
+
+          - if:
+              properties:
+                function:
+                  const: uart0
+            then:
+              properties:
+                groups:
+                  enum: [uart0]
+
+          - if:
+              properties:
+                function:
+                  const: uart1
+            then:
+              properties:
+                groups:
+                  enum: [uart1]
+
+          - if:
+              properties:
+                function:
+                  const: uart2
+            then:
+              properties:
+                groups:
+                  enum: [uart2]
+
+          - if:
+              properties:
+                function:
+                  const: utif
+            then:
+              properties:
+                groups:
+                  enum: [p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
+                         p3led_kn, p4led_an, p4led_kn, pwm0, pwm1, sdmode, spis]
+
+          - if:
+              properties:
+                function:
+                  const: wdt
+            then:
+              properties:
+                groups:
+                  enum: [wdt]
+
+          - if:
+              properties:
+                function:
+                  const: wled_an
+            then:
+              properties:
+                groups:
+                  enum: [wled_an]
+
+          - if:
+              properties:
+                function:
+                  const: wled_kn
+            then:
+              properties:
+                groups:
+                  enum: [wled_kn]
+
+          - if:
+              properties:
+                function:
+                  const: "-"
+            then:
+              properties:
+                groups:
+                  enum: [i2c, spi cs1, uart0]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,mt76x8-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml
new file mode 100644
index 0000000000..74d52a741f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml
@@ -0,0 +1,480 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7981-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7981 Pin Controller
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The MediaTek's MT7981 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7981-pinctrl
+
+  reg:
+    minItems: 9
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: iocfg_rt
+      - const: iocfg_rm
+      - const: iocfg_rb
+      - const: iocfg_lb
+      - const: iocfg_bl
+      - const: iocfg_tm
+      - const: iocfg_tl
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^.*mux.*$':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+
+          The following table shows the effective values of "group", "function"
+          properties and chip pinout pins
+
+          groups                 function    pins (in pin#)
+          ---------------------------------------------------------------------
+          "wa_aice1"             "wa_aice"   0, 1
+          "wa_aice2"             "wa_aice"   0, 1
+          "wm_uart_0"            "uart"      0, 1
+          "dfd"                  "dfd"       0, 1, 4, 5
+          "watchdog"             "watchdog"  2
+          "pcie_pereset"         "pcie"      3
+          "jtag"                 "jtag"      4, 5, 6, 7, 8
+          "wm_jtag_0"            "jtag"      4, 5, 6, 7, 8
+          "wo0_jtag_0"           "jtag"      9, 10, 11, 12, 13
+          "uart2_0"              "uart"      4, 5, 6, 7
+          "gbe_led0"             "led"       8
+          "pta_ext_0"            "pta"       4, 5, 6
+          "pwm2"                 "pwm"       7
+          "net_wo0_uart_txd_0"   "uart"      8
+          "spi1_0"               "spi"       4, 5, 6, 7
+          "i2c0_0"               "i2c"       6, 7
+          "dfd_ntrst"            "dfd"       8
+          "wm_aice1"             "wa_aice"   9, 10
+          "pwm0_0"               "pwm"       13
+          "pwm0_1"               "pwm"       15
+          "pwm1_0"               "pwm"       14
+          "pwm1_1"               "pwm"       15
+          "net_wo0_uart_txd_1"   "uart"      14
+          "net_wo0_uart_txd_2"   "uart"      15
+          "gbe_led1"             "led"       13
+          "pcm"                  "pcm"       9, 10, 11, 12, 13, 25
+          "watchdog1"            "watchdog"  13
+          "udi"                  "udi"       9, 10, 11, 12, 13
+          "drv_vbus"             "usb"       14
+          "emmc_45"              "flash"     15, 16, 17, 18, 19, 20, 21, 22, 23,
+                                             24, 25
+
+          "snfi"                 "flash"     16, 17, 18, 19, 20, 21
+          "spi0"                 "spi"       16, 17, 18, 19
+          "spi0_wp_hold"         "spi"       20, 21
+          "spi1_1"               "spi"       22, 23, 24, 25
+          "spi2"                 "spi"       26, 27, 28, 29
+          "spi2_wp_hold"         "spi"       30, 31
+          "uart1_0"              "uart"      16, 17, 18, 19
+          "uart1_1"              "uart"      26, 27, 28, 29
+          "uart2_1"              "uart"      22, 23, 24, 25
+          "pta_ext_1"            "pta"       22, 23, 24
+          "wm_aurt_1"            "uart"      20, 21
+          "wm_aurt_2"            "uart"      30, 31
+          "wm_jtag_1"            "jtag"      20, 21, 22, 23, 24
+          "wo0_jtag_1"           "jtag"      25, 26, 27, 28, 29
+          "wa_aice3"             "wa_aice"   28, 20
+          "wm_aice2"             "wa_aice"   30, 31
+          "i2c0_1"               "i2c"       30, 31
+          "u2_phy_i2c"           "i2c"       30, 31
+          "uart0"                "uart"      32, 33
+          "sgmii1_phy_i2c"       "i2c"       32, 33
+          "u3_phy_i2c"           "i2c"       32, 33
+          "sgmii0_phy_i2c"       "i2c"       32, 33
+          "pcie_clk"             "pcie"      34
+          "pcie_wake"            "pcie"      35
+          "i2c0_2"               "i2c"       36, 37
+          "smi_mdc_mdio"         "eth"       36, 37
+          "gbe_ext_mdc_mdio"     "eth"       36, 37
+          "wf0_mode1"            "eth"       40, 41, 42, 43, 44, 45, 46, 47, 48,
+                                             49, 50, 51, 52, 53, 54, 55, 56
+
+          "wf0_mode3"            "eth"       45, 46, 47, 48, 49, 51
+          "wf2g_led0"            "led"       30
+          "wf2g_led1"            "led"       34
+          "wf5g_led0"            "led"       31
+          "wf5g_led1"            "led"       35
+          "mt7531_int"           "eth"       38
+          "ant_sel"              "ant"       14, 15, 16, 17, 18, 19, 20, 21, 22,
+                                             23, 24, 25, 34, 35
+
+        $ref: /schemas/pinctrl/pinmux-node.yaml
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [wa_aice, dfd, jtag, pta, pcm, udi, usb, ant, eth, i2c, led,
+                   pwm, spi, uart, watchdog, flash, pcie]
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: wa_aice
+            then:
+              properties:
+                groups:
+                  enum: [wa_aice1, wa_aice2, wm_aice1_1, wa_aice3, wm_aice1_2]
+          - if:
+              properties:
+                function:
+                  const: dfd
+            then:
+              properties:
+                groups:
+                  enum: [dfd, dfd_ntrst]
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag, wm_jtag_0, wo0_jtag_0, wo0_jtag_1, wm_jtag_1]
+          - if:
+              properties:
+                function:
+                  const: pta
+            then:
+              properties:
+                groups:
+                  enum: [pta_ext_0, pta_ext_1]
+          - if:
+              properties:
+                function:
+                  const: pcm
+            then:
+              properties:
+                groups:
+                  enum: [pcm]
+          - if:
+              properties:
+                function:
+                  const: udi
+            then:
+              properties:
+                groups:
+                  enum: [udi]
+          - if:
+              properties:
+                function:
+                  const: usb
+            then:
+              properties:
+                groups:
+                  enum: [drv_vbus]
+          - if:
+              properties:
+                function:
+                  const: ant
+            then:
+              properties:
+                groups:
+                  enum: [ant_sel]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [smi_mdc_mdio, gbe_ext_mdc_mdio, wf0_mode1, wf0_mode3,
+                         mt7531_int]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c0_0, i2c0_1, u2_phy_i2c, sgmii1_phy_i2c, u3_phy_i2c,
+                         sgmii0_phy_i2c, i2c0_2]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0,
+                         wf5g_led1]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [pwm2, pwm0_0, pwm0_1, pwm1_0, pwm1_1]
+                  maxItems: 3
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2,
+                           spi2_wp_hold]
+                  maxItems: 4
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [wm_uart_0, uart2_0, net_wo0_uart_txd_0,
+                           net_wo0_uart_txd_1, net_wo0_uart_txd_2, uart1_0,
+                           uart1_1, uart2_1, wm_aurt_1, wm_aurt_2, uart0]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [emmc_45, snfi]
+                  maxItems: 1
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [pcie_clk, pcie_wake, pcie_pereset]
+                  maxItems: 3
+
+      '^.*conf.*$':
+        type: object
+        additionalProperties: false
+        description: pinconf configuration nodes.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pins:
+            description:
+              An array of strings. Each string contains the name of a pin.
+            items:
+              enum: [GPIO_WPS, GPIO_RESET, SYS_WATCHDOG, PCIE_PERESET_N,
+                     JTAG_JTDO, JTAG_JTDI, JTAG_JTMS, JTAG_JTCLK, JTAG_JTRST_N,
+                     WO_JTAG_JTDO, WO_JTAG_JTDI, WO_JTAG_JTMS, WO_JTAG_JTCLK,
+                     WO_JTAG_JTRST_N, USB_VBUS, PWM0, SPI0_CLK, SPI0_MOSI,
+                     SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK,
+                     SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI,
+                     SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD,
+                     UART0_TXD, PCIE_CLK_REQ, PCIE_WAKE_N, SMI_MDC, SMI_MDIO,
+                     GBE_INT, GBE_RESET, WF_DIG_RESETB, WF_CBA_RESETB,
+                     WF_XO_REQ, WF_TOP_CLK, WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3,
+                     WF_HB4, WF_HB0, WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8,
+                     WF_HB9, WF_HB10]
+            maxItems: 57
+
+          bias-disable: true
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description:
+                  PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+                  dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description:
+                  PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+                  dt-bindings/pinctrl/mt65xx.h.
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,pull-up-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull up settings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull down settings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt65xx.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pio: pinctrl@11d00000 {
+        compatible = "mediatek,mt7981-pinctrl";
+        reg = <0 0x11d00000 0 0x1000>,
+              <0 0x11c00000 0 0x1000>,
+              <0 0x11c10000 0 0x1000>,
+              <0 0x11d20000 0 0x1000>,
+              <0 0x11e00000 0 0x1000>,
+              <0 0x11e20000 0 0x1000>,
+              <0 0x11f00000 0 0x1000>,
+              <0 0x11f10000 0 0x1000>,
+              <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio", "iocfg_rt", "iocfg_rm",
+                    "iocfg_rb", "iocfg_lb", "iocfg_bl",
+                    "iocfg_tm", "iocfg_tl", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 56>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+
+        mdio_pins: mdio-pins {
+          mux {
+            function = "eth";
+            groups = "smi_mdc_mdio";
+          };
+        };
+
+        spi0_flash_pins: spi0-pins {
+          mux {
+            function = "spi";
+            groups = "spi0", "spi0_wp_hold";
+          };
+
+          conf-pu {
+            pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+            drive-strength = <MTK_DRIVE_8mA>;
+            bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+          };
+
+          conf-pd {
+            pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+            drive-strength = <MTK_DRIVE_8mA>;
+            bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+          };
+        };
+
+        pcie_pins: pcie-pins {
+          mux {
+            function = "pcie";
+            groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+          };
+        };
+
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 0000000000..5ad65135fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,462 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7986 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description:
+  The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7986a-pinctrl
+      - mediatek,mt7986b-pinctrl
+
+  reg:
+    minItems: 8
+    maxItems: 8
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: iocfg_rt
+      - const: iocfg_rb
+      - const: iocfg_lt
+      - const: iocfg_lb
+      - const: iocfg_tr
+      - const: iocfg_tl
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description:
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^.*mux.*$':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+
+          The following table shows the effective values of "group", "function"
+          properties and chip pinout pins
+
+          groups            function    pins (in pin#)
+          ---------------------------------------------------------------------
+          "watchdog"        "watchdog"  0
+          "wifi_led"        "led"       1, 2
+          "i2c"             "i2c"       3, 4
+          "uart1_0"         "uart"      7, 8, 9, 10
+          "uart1_rx_tx"     "uart"      42, 43
+          "uart1_cts_rts"   "uart"      44, 45
+          "pcie_clk"        "pcie"      9
+          "pcie_wake"       "pcie"      10
+          "spi1_0"          "spi"       11, 12, 13, 14
+          "pwm1_1"          "pwm"       20,
+          "pwm0"            "pwm"       21,
+          "pwm1_0"          "pwm"       22,
+          "snfi"            "flash"     23, 24, 25, 26, 27, 28
+          "spi1_2"          "spi"       29, 30, 31, 32
+          "emmc_45"         "emmc"      22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+                                        32
+
+          "spi1_1"          "spi"       23, 24, 25, 26
+          "uart1_2_rx_tx"   "uart"      29, 30
+          "uart1_2_cts_rts" "uart"      31, 32
+          "uart1_1"         "uart"      23, 24, 25, 26
+          "uart2_0_rx_tx"   "uart"      29, 30
+          "uart2_0_cts_rts" "uart"      31, 32
+          "spi0"            "spi"       33, 34, 35, 36
+          "spi0_wp_hold"    "spi"       37, 38
+          "uart1_3_rx_tx"   "uart"      35, 36
+          "uart1_3_cts_rts" "uart"      37, 38
+          "uart2_1"         "uart"      33, 34, 35, 36
+          "spi1_3"          "spi"       33, 34, 35, 36
+          "uart0"           "uart"      39, 40
+          "pcie_pereset"    "pcie"      41
+          "uart1"           "uart"      42, 43, 44, 45
+          "uart2"           "uart"      46, 47, 48, 49
+          "emmc_51"         "emmc"      50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+                                        60, 61
+
+          "pcm"             "audio"     62, 63, 64, 65
+          "i2s"             "audio"     62, 63, 64, 65
+          "switch_int"      "eth"       66
+          "mdc_mdio"        "eth"       67
+          "wf_2g"           "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83
+          "wf_5g"           "wifi"      91, 92, 93, 94, 95, 96, 97, 98, 99, 100
+          "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
+                                        84, 85
+
+        $ref: /schemas/pinctrl/pinmux-node.yaml
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+              There is no "audio", "pcie" functions on mt7986b, you can only use
+              those functions on mt7986a.
+            enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+                   watchdog, wifi]
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+              There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and
+              "i2s" groups on mt7986b, you can only use those groups on mt7986a.
+        required:
+          - function
+          - groups
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: audio
+            then:
+              properties:
+                groups:
+                  enum: [pcm, i2s]
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc_45, emmc_51]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [switch_int, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [wifi_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [snfi]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [pcie_clk, pcie_wake, pcie_pereset]
+                  maxItems: 3
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [pwm0, pwm1_0, pwm1_1]
+                  maxItems: 2
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+                  maxItems: 2
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1,
+                           uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx,
+                           uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts,
+                           uart2_1, uart0, uart1, uart2]
+                  maxItems: 2
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  items:
+                    enum: [wf_2g, wf_5g, wf_dbdc]
+                  maxItems: 3
+      '^.*conf.*$':
+        type: object
+        additionalProperties: false
+        description:
+          pinconf configuration nodes.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pins:
+            description:
+              An array of strings. Each string contains the name of a pin. There
+              is no PIN 41 to PIN 65 above on mt7686b, you can only use those
+              pins on mt7986a.
+            items:
+              enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                     GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                     GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13,
+                     GPIO_14, GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI,
+                     SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK,
+                     SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI,
+                     SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD,
+                     UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, UART1_CTS,
+                     UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS,
+                     EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, EMMC_DATA_3,
+                     EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, EMMC_DATA_7,
+                     EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, PCM_DRX,
+                     PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                     WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                     WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                     WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                     WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                     WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                     WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                     WF1_HB8]
+            maxItems: 101
+
+          bias-disable: true
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description:
+                  PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+                  dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description:
+                  PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+                  dt-bindings/pinctrl/mt65xx.h.
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,pull-up-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull up settings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+              Pull down settings for 2 pull resistors, R0 and R1. Valid arguments
+              are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt65xx.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pio: pinctrl@1001f000 {
+        compatible = "mediatek,mt7986a-pinctrl";
+        reg = <0 0x1001f000 0 0x1000>,
+              <0 0x11c30000 0 0x1000>,
+              <0 0x11c40000 0 0x1000>,
+              <0 0x11e20000 0 0x1000>,
+              <0 0x11e30000 0 0x1000>,
+              <0 0x11f00000 0 0x1000>,
+              <0 0x11f10000 0 0x1000>,
+              <0 0x1000b000 0 0x1000>;
+        reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+                    "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 100>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+
+        pcie_pins: pcie-pins {
+          mux {
+            function = "pcie";
+            groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+          };
+        };
+
+        pwm_pins: pwm-pins {
+          mux {
+            function = "pwm";
+            groups = "pwm0", "pwm1_0";
+          };
+        };
+
+        spi0_pins: spi0-pins {
+          mux {
+            function = "spi";
+            groups = "spi0", "spi0_wp_hold";
+          };
+        };
+
+        uart1_pins: uart1-pins {
+          mux {
+            function = "uart";
+            groups = "uart1";
+          };
+        };
+
+        uart1_3_pins: uart1-3-pins {
+          mux {
+            function = "uart";
+            groups = "uart1_3_rx_tx", "uart1_3_cts_rts";
+          };
+        };
+
+        uart2_pins: uart2-pins {
+          mux {
+            function = "uart";
+            groups = "uart2";
+          };
+        };
+
+        mmc0_pins_default: mmc0-pins {
+          mux {
+            function = "emmc";
+            groups = "emmc_51";
+          };
+          conf-cmd-dat {
+            pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+                   "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+                   "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+            input-enable;
+            drive-strength = <4>;
+            bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+          };
+          conf-clk {
+            pins = "EMMC_CK";
+            drive-strength = <6>;
+            bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+          };
+          conf-ds {
+            pins = "EMMC_DSL";
+            bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+          };
+          conf-rst {
+            pins = "EMMC_RSTB";
+            drive-strength = <4>;
+            bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+          };
+        };
+
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
new file mode 100644
index 0000000000..8507bd15f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8183 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description:
+  The MediaTek's MT8183 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8183-pinctrl
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg1
+      - const: iocfg2
+      - const: iocfg3
+      - const: iocfg4
+      - const: iocfg5
+      - const: iocfg6
+      - const: iocfg7
+      - const: iocfg8
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description:
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+patternProperties:
+  '-pins(-[a-z]+)?$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          mediatek,drive-strength-adv:
+            deprecated: true
+            description: |
+              DEPRECATED: Please use drive-strength-microamp instead.
+              Describe the specific driving setup property.
+              For I2C pins, the existing generic driving setup can only support
+              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+              driving setup, the existing generic setup will be disabled.
+              The specific driving setup is controlled by E1E0EN.
+              When E1=0/E0=0, the strength is 0.125mA.
+              When E1=0/E0=1, the strength is 0.25mA.
+              When E1=1/E0=0, the strength is 0.5mA.
+              When E1=1/E0=1, the strength is 1mA.
+              EN is used to enable or disable the specific driving setup.
+              Valid arguments are described as below:
+              0: (E1, E0, EN) = (0, 0, 0)
+              1: (E1, E0, EN) = (0, 0, 1)
+              2: (E1, E0, EN) = (0, 1, 0)
+              3: (E1, E0, EN) = (0, 1, 1)
+              4: (E1, E0, EN) = (1, 0, 0)
+              5: (E1, E0, EN) = (1, 0, 1)
+              6: (E1, E0, EN) = (1, 1, 0)
+              7: (E1, E0, EN) = (1, 1, 1)
+              So the valid arguments are from 0 to 7.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description:
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description:
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+          compatible = "mediatek,mt8183-pinctrl";
+          reg = <0 0x10005000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11e80000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11e90000 0 0x1000>,
+                <0 0x11d30000 0 0x1000>,
+                <0 0x11d20000 0 0x1000>,
+                <0 0x11c50000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+          reg-names = "iocfg0", "iocfg1", "iocfg2",
+                "iocfg3", "iocfg4", "iocfg5",
+                "iocfg6", "iocfg7", "iocfg8",
+                "eint";
+          gpio-controller;
+          #gpio-cells = <2>;
+          gpio-ranges = <&pio 0 0 192>;
+          interrupt-controller;
+          interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+          #interrupt-cells = <2>;
+
+          i2c0_pins_a: i2c0-pins {
+            pins1 {
+              pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+                <PINMUX_GPIO49__FUNC_SDA5>;
+              mediatek,pull-up-adv = <3>;
+              drive-strength-microamp = <1000>;
+            };
+          };
+
+          i2c1_pins_a: i2c1-pins {
+            pins {
+              pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+                <PINMUX_GPIO51__FUNC_SDA3>;
+              mediatek,pull-down-adv = <2>;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml
new file mode 100644
index 0000000000..69136ddd0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml
@@ -0,0 +1,275 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8186-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8186 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description:
+  The MediaTek's MT8186 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description:
+      Physical address base for GPIO base registers. There are 8 different GPIO
+      physical address base in mt8186.
+    maxItems: 8
+
+  reg-names:
+    description:
+      GPIO base register names.
+    items:
+      - const: iocfg0
+      - const: iocfg_lt
+      - const: iocfg_lm
+      - const: iocfg_lb
+      - const: iocfg_bl
+      - const: iocfg_rb
+      - const: iocfg_rt
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description:
+      Identifying i2c pins pull up/down type which is RSEL. It can support RSEL
+      define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO128 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: pinmux-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8186 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203]
+                description: mt8186 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8186 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8186.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+              "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in
+              mt8186. It can also support resistance value(ohm) "75000" & "5000"
+              in mt8186.
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8186 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203]
+                description: mt8186 pull up RSEL type define value.
+              - enum: [1000, 5000, 10000, 75000]
+                description: mt8186 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8186.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+              "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in
+              mt8186. It can also support resistance value(ohm) "1000" & "5000"
+              & "10000" & "75000" in mt8186.
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8186-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x10002000 0x0200>,
+            <0x10002200 0x0200>,
+            <0x10002400 0x0200>,
+            <0x10002600 0x0200>,
+            <0x10002A00 0x0200>,
+            <0x10002c00 0x0200>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+                  "iocfg_lb", "iocfg_bl", "iocfg_rb",
+                  "iocfg_rt", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 185>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
+                   <PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
+                   <PINMUX_GPIO2__FUNC_SPI0_MO_B>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
+          bias-pull-down;
+        };
+      };
+
+      i2c0-pins {
+        pins {
+          pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
+                   <PINMUX_GPIO128__FUNC_SDA0>;
+          bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+          drive-strength-microamp = <1000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
new file mode 100644
index 0000000000..e994b0c70d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8188 Pin Controller
+
+maintainers:
+  - Hui Liu <hui.liu@mediatek.com>
+
+description:
+  The MediaTek's MT8188 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8188-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier, should be two. The first cell is the
+      pin number, the second cell is used to specify optional parameters which
+      are defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    items:
+      - description: gpio registers base address
+      - description: rm group io configuration registers base address
+      - description: lt group io configuration registers base address
+      - description: lm group io configuration registers base address
+      - description: rt group io configuration registers base address
+      - description: eint registers base address
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg_rm
+      - const: iocfg_lt
+      - const: iocfg_lm
+      - const: iocfg_rt
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description:
+      We provide two methods to select the resistance for I2C when pull up or
+      pull down. The first is by RSEL definition value, another one is by
+      resistance value(ohm). This flag is used to identify if the method is
+      resistance(si unit) value.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h
+              directly, for this SoC.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8188 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8188 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8188 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it doesn't need add RSEL & R1R0
+              define and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8188.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit". It can support
+              "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+              "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
+              "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
+              "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
+              mt8188. It can also support resistance value(ohm) "75000" & "5000"
+              in mt8188.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8188 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8188 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8188 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set
+              different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8188.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit". It can support
+              "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+              "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
+              "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
+              "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
+              mt8188. It can also support resistance value(ohm) "1000" & "1500"
+              & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt8188-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c00000 0x1000>,
+              <0x11e10000 0x1000>,
+              <0x11e20000 0x1000>,
+              <0x11ea0000 0x1000>,
+              <0x1000b000 0x1000>;
+        reg-names = "iocfg0", "iocfg_rm",
+                    "iocfg_lt", "iocfg_lm", "iocfg_rt",
+                    "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 176>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        pio-pins {
+            pins {
+                pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+                output-low;
+            };
+        };
+
+        spi0-pins {
+            pins-spi {
+                pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+                         <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+                         <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
+                drive-strength = <6>;
+            };
+            pins-spi-mi {
+                pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+                bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+            };
+        };
+
+        i2c0-pins {
+            pins {
+                pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
+                         <PINMUX_GPIO56__FUNC_B1_SDA0>;
+                bias-disable;
+                drive-strength-microamp = <1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
new file mode 100644
index 0000000000..1686427eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8192-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8192 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description:
+  The MediaTek's MT8192 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8192-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: GPIO valid number range.
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description:
+      Physical address base for GPIO base registers. There are 11 GPIO physical
+      address base in mt8192.
+    maxItems: 11
+
+  reg-names:
+    description:
+      GPIO base register names.
+    maxItems: 11
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        description:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: pinmux-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          drive-strength:
+            description:
+              It can support some arguments, such as MTK_DRIVE_4mA,
+              MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. It can only
+              support 2/4/6/8/10/12/14/16mA in mt8192.
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines
+                  in dt-bindings/pinctrl/mt65xx.h.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines
+                  in dt-bindings/pinctrl/mt65xx.h.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+            #include <dt-bindings/interrupt-controller/arm-gic.h>
+            pio: pinctrl@10005000 {
+                    compatible = "mediatek,mt8192-pinctrl";
+                    reg = <0x10005000 0x1000>,
+                          <0x11c20000 0x1000>,
+                          <0x11d10000 0x1000>,
+                          <0x11d30000 0x1000>,
+                          <0x11d40000 0x1000>,
+                          <0x11e20000 0x1000>,
+                          <0x11e70000 0x1000>,
+                          <0x11ea0000 0x1000>,
+                          <0x11f20000 0x1000>,
+                          <0x11f30000 0x1000>,
+                          <0x1000b000 0x1000>;
+                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+                          "iocfg_bl", "iocfg_br", "iocfg_lm",
+                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
+                          "iocfg_tl", "eint";
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pio 0 0 220>;
+                    interrupt-controller;
+                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+                    #interrupt-cells = <2>;
+
+                    spi1-default-pins {
+                            pins-cs-mosi-clk {
+                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+                                    bias-disable;
+                            };
+
+                            pins-miso {
+                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+                                    bias-pull-down;
+                            };
+                    };
+            };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml
new file mode 100644
index 0000000000..33cb71775d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8195-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8195 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description:
+  The MediaTek's MT8195 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: GPIO valid number range.
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description:
+      Physical address base for GPIO base registers. There are 8 GPIO physical
+      address base in mt8195.
+    maxItems: 8
+
+  reg-names:
+    description:
+      GPIO base register names.
+    maxItems: 8
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description:
+      Identifying i2c pins pull up/down type which is RSEL. It can support RSEL
+      define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO8 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: pinmux-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8195 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "75000" & "5000" in mt8195.
+
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8195 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm) "1000"
+              & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000"
+              in mt8195.
+              An example of using RSEL define:
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8195-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x11d10000 0x1000>,
+            <0x11d30000 0x1000>,
+            <0x11d40000 0x1000>,
+            <0x11e20000 0x1000>,
+            <0x11eb0000 0x1000>,
+            <0x11f40000 0x1000>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+                  "iocfg_br", "iocfg_lm", "iocfg_rb",
+                  "iocfg_tl", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 144>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+                   <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+                   <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+          bias-pull-down;
+        };
+      };
+
+      i2c0-pins {
+        pins {
+          pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+                   <PINMUX_GPIO9__FUNC_SCL0>;
+          bias-disable;
+          drive-strength-microamp = <1000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
new file mode 100644
index 0000000000..7b43e78572
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8365-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8365 Pin Controller
+
+maintainers:
+  - Zhiyong Tao <zhiyong.tao@mediatek.com>
+  - Bernhard Rosenkränzer <bero@baylibre.com>
+
+description:
+  The MediaTek's MT8365 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8365-pinctrl
+
+  reg:
+    maxItems: 1
+
+  mediatek,pctl-regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    minItems: 1
+    maxItems: 2
+    description:
+      Should be phandles of the syscfg node.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+patternProperties:
+  "-pins$":
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "pins$":
+        type: object
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: Pull up R1/R0 type define value.
+            description: |
+              For pull up type is normal, it don't need add R1/R0 define.
+              For pull up type is R1/R0 type, it can add value to set different
+              resistance. Valid arguments are described as below:
+              100: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              101: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              102: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              103: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: Pull down R1/R0 type define value.
+            description: |
+              For pull down type is normal, it don't need add R1/R0 define.
+              For pull down type is R1/R0 type, it can add value to set
+              different resistance. Valid arguments are described as below:
+              100: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              101: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              102: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              103: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          mediatek,drive-strength-adv:
+            deprecated: true
+            description: |
+              DEPRECATED: Please use drive-strength-microamp instead.
+              Describe the specific driving setup property.
+              For I2C pins, the existing generic driving setup can only support
+              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+              driving setup, the existing generic setup will be disabled.
+              The specific driving setup is controlled by E1E0EN.
+              When E1=0/E0=0, the strength is 0.125mA.
+              When E1=0/E0=1, the strength is 0.25mA.
+              When E1=1/E0=0, the strength is 0.5mA.
+              When E1=1/E0=1, the strength is 1mA.
+              EN is used to enable or disable the specific driving setup.
+              Valid arguments are described as below:
+              0: (E1, E0, EN) = (0, 0, 0)
+              1: (E1, E0, EN) = (0, 0, 1)
+              2: (E1, E0, EN) = (0, 1, 0)
+              3: (E1, E0, EN) = (0, 1, 1)
+              4: (E1, E0, EN) = (1, 0, 0)
+              5: (E1, E0, EN) = (1, 0, 1)
+              6: (E1, E0, EN) = (1, 1, 0)
+              7: (E1, E0, EN) = (1, 1, 1)
+              So the valid arguments are from 0 to 7.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+          mediatek,pull-up-adv:
+            deprecated: true
+            description: |
+              DEPRECATED: Please use bias-pull-up instead.
+              Pull up settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            deprecated: true
+            description: |
+              DEPRECATED: Please use bias-pull-down instead.
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as
+              below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description:
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description:
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pio: pinctrl@1000b000 {
+        compatible = "mediatek,mt8365-pinctrl";
+        reg = <0 0x1000b000 0 0x1000>;
+        mediatek,pctl-regmap = <&syscfg_pctl>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+        pio-pins {
+          pins {
+            pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+            mediatek,pull-up-adv = <3>;
+            bias-pull-up;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
new file mode 100644
index 0000000000..51efd20851
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
@@ -0,0 +1,60 @@
+* Microchip PIC32 Pin Controller
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+PIC32 'pin configuration node' is a node of a group of pins which can be
+used for a specific device or function. This node represents configurations of
+pins, optional function, and optional mux related configuration.
+
+Required properties for pin controller node:
+ - compatible: "microchip,pic32mada-pinctrl"
+ - reg: Address range of the pinctrl registers.
+ - clocks: Clock specifier (see clock bindings for details)
+
+Required properties for pin configuration sub-nodes:
+ - pins: List of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - function: Mux function for the specified pins.
+ - bias-pull-up: Enable weak pull-up.
+ - bias-pull-down: Enable weak pull-down.
+ - input-enable: Set the pin as an input.
+ - output-low: Set the pin as an output level low.
+ - output-high: Set the pin as an output level high.
+ - microchip,digital: Enable digital I/O.
+ - microchip,analog: Enable analog I/O.
+
+Example:
+
+pic32_pinctrl: pinctrl@1f801400{
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "microchip,pic32mzda-pinctrl";
+	reg = <0x1f801400 0x400>;
+	clocks = <&rootclk PB1CLK>;
+
+	pinctrl_uart2: pinctrl_uart2 {
+		uart2-tx {
+			pins = "G9";
+			function = "U2TX";
+			microchip,digital;
+			output-low;
+		};
+		uart2-rx {
+			pins = "B0";
+			function = "U2RX";
+			microchip,digital;
+			input-enable;
+		};
+	};
+};
+
+uart2: serial@1f822200 {
+	compatible = "microchip,pic32mzda-uart";
+	reg = <0x1f822200 0x50>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
new file mode 100644
index 0000000000..0df4e114fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/microchip,sparx5-sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi/Microchip Serial GPIO controller
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  By using a serial interface, the SIO controller significantly extend
+  the number of available GPIOs with a minimum number of additional
+  pins on the device. The primary purpose of the SIO controllers is to
+  connect control signals from SFP modules and to act as an LED
+  controller.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - microchip,sparx5-sgpio
+      - mscc,ocelot-sgpio
+      - mscc,luton-sgpio
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  microchip,sgpio-port-ranges:
+    description: This is a sequence of tuples, defining intervals of
+      enabled ports in the serial input stream. The enabled ports must
+      match the hardware configuration in order for signals to be
+      properly written/read to/from the controller holding
+      registers. Being tuples, then number of arguments must be
+      even. The tuples mast be ordered (low, high) and are
+      inclusive.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: |
+            "low" indicates start bit number of range
+          minimum: 0
+          maximum: 31
+        - description: |
+            "high" indicates end bit number of range
+          minimum: 0
+          maximum: 31
+    minItems: 1
+    maxItems: 32
+
+  bus-frequency:
+    description: The sgpio controller frequency (Hz). This dictates
+      the serial bitstream speed, which again affects the latency in
+      getting control signals back and forth between external shift
+      registers. The speed must be no larger than half the system
+      clock, and larger than zero.
+    default: 12500000
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: switch
+
+patternProperties:
+  "^gpio@[0-1]$":
+    type: object
+    properties:
+      compatible:
+        const: microchip,sparx5-sgpio-bank
+
+      reg:
+        description: |
+          The GPIO bank number. "0" is designates the input pin bank,
+          "1" the output bank.
+        maxItems: 1
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        description: |
+         Specifies the pin (port and bit) and flags. Note that the
+         SGIO pin is defined by *2* numbers, a port number between 0
+         and 31, and a bit index, 0 to 3. The maximum bit number is
+         controlled indirectly by the "ngpios" property: (ngpios/32).
+        const: 3
+
+      interrupts:
+        description: Specifies the sgpio IRQ (in parent controller)
+        maxItems: 1
+
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        description:
+          Specifies the pin (port and bit) and flags, as defined in
+          defined in include/dt-bindings/interrupt-controller/irq.h
+        const: 3
+
+      ngpios:
+        description: The numbers of GPIO's exposed. This must be a
+          multiple of 32.
+        minimum: 32
+        maximum: 128
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+      - ngpios
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - microchip,sgpio-port-ranges
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sgpio2: gpio@1101059c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "microchip,sparx5-sgpio";
+      clocks = <&sys_clk>;
+      pinctrl-0 = <&sgpio2_pins>;
+      pinctrl-names = "default";
+      reg = <0x1101059c 0x118>;
+      microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
+      bus-frequency = <25000000>;
+      sgpio_in2: gpio@0 {
+        reg = <0>;
+        compatible = "microchip,sparx5-sgpio-bank";
+        gpio-controller;
+        #gpio-cells = <3>;
+        ngpios = <96>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+      };
+      sgpio_out2: gpio@1 {
+        compatible = "microchip,sparx5-sgpio-bank";
+        reg = <1>;
+        gpio-controller;
+        #gpio-cells = <3>;
+        ngpios = <96>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
new file mode 100644
index 0000000000..dbb3e1bd58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot pin controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan966x-pinctrl
+      - microchip,sparx5-pinctrl
+      - mscc,jaguar2-pinctrl
+      - mscc,luton-pinctrl
+      - mscc,ocelot-pinctrl
+      - mscc,serval-pinctrl
+      - mscc,servalt-pinctrl
+
+  reg:
+    items:
+      - description: Base address
+      - description: Extended pin configuration registers
+    minItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    description: Optional shared switch reset.
+    items:
+      - const: switch
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: pinmux-node.yaml
+      - $ref: pincfg-node.yaml
+
+    properties:
+      function: true
+      pins: true
+      output-high: true
+      output-low: true
+      drive-strength: true
+
+    required:
+      - function
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,lan966x-pinctrl
+              - microchip,sparx5-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio: pinctrl@71070034 {
+        compatible = "mscc,ocelot-pinctrl";
+        reg = <0x71070034 0x28>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&gpio 0 0 22>;
+
+        uart_pins: uart-pins {
+            pins = "GPIO_6", "GPIO_7";
+            function = "uart";
+        };
+
+        uart2_pins: uart2-pins {
+            pins = "GPIO_12", "GPIO_13";
+            function = "uart2";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
new file mode 100644
index 0000000000..a1264cc866
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
@@ -0,0 +1,216 @@
+Nuvoton NPCM7XX Pin Controllers
+
+The Nuvoton BMC NPCM7XX Pin Controller multi-function routed through
+the multiplexing block, Each pin supports GPIO functionality (GPIOx)
+and multiple functions that directly connect the pin to different
+hardware blocks.
+
+Required properties:
+- #address-cells : should be 1.
+- #size-cells	 : should be 1.
+- compatible	 : "nuvoton,npcm750-pinctrl" for Poleg NPCM7XX.
+- ranges	 : defines mapping ranges between pin controller node (parent)
+			to GPIO bank node (children).
+
+=== GPIO Bank Subnode ===
+
+The NPCM7XX has 8 GPIO Banks each GPIO bank supports 32 GPIO.
+
+Required GPIO Bank subnode-properties:
+- reg 			: specifies physical base address and size of the GPIO
+				bank registers.
+- gpio-controller	: Marks the device node as a GPIO controller.
+- #gpio-cells		: Must be <2>. The first cell is the gpio pin number
+				and the second cell is used for optional parameters.
+- interrupts		: contain the GPIO bank interrupt with flags for falling edge.
+- gpio-ranges		: defines the range of pins managed by the GPIO bank controller.
+
+For example, GPIO bank subnodes like the following:
+	gpio0: gpio@f0010000 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x0 0x80>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-ranges = <&pinctrl 0 0 32>;
+	};
+
+=== Pin Mux Subnode ===
+
+- pin: A string containing the name of the pin
+	An array of strings, each string containing the name of a pin.
+	These pin are used for selecting pin configuration.
+
+The following are the list of pins available:
+	"GPIO0/IOX1DI", "GPIO1/IOX1LD",	"GPIO2/IOX1CK", "GPIO3/IOX1D0",
+	"GPIO4/IOX2DI/SMB1DSDA", "GPIO5/IOX2LD/SMB1DSCL", "GPIO6/IOX2CK/SMB2DSDA",
+	"GPIO7/IOX2D0/SMB2DSCL", "GPIO8/LKGPO1", "GPIO9/LKGPO2", "GPIO10/IOXHLD",
+	"GPIO11/IOXHCK", "GPIO12/GSPICK/SMB5BSCL", "GPIO13/GSPIDO/SMB5BSDA",
+	"GPIO14/GSPIDI/SMB5CSCL", "GPIO15/GSPICS/SMB5CSDA", "GPIO16/LKGPO0",
+	"GPIO17/PSPI2DI/SMB4DEN","GPIO18/PSPI2D0/SMB4BSDA", "GPIO19/PSPI2CK/SMB4BSCL",
+	"GPIO20/SMB4CSDA/SMB15SDA", "GPIO21/SMB4CSCL/SMB15SCL", "GPIO22/SMB4DSDA/SMB14SDA",
+	"GPIO23/SMB4DSCL/SMB14SCL", "GPIO24/IOXHDO", "GPIO25/IOXHDI", "GPIO26/SMB5SDA",
+	"GPIO27/SMB5SCL", "GPIO28/SMB4SDA", "GPIO29/SMB4SCL", "GPIO30/SMB3SDA",
+	"GPIO31/SMB3SCL", "GPIO32/nSPI0CS1","SPI0D2", "SPI0D3", "GPIO37/SMB3CSDA",
+	"GPIO38/SMB3CSCL", "GPIO39/SMB3BSDA", "GPIO40/SMB3BSCL", "GPIO41/BSPRXD",
+	"GPO42/BSPTXD/STRAP11", "GPIO43/RXD1/JTMS2/BU1RXD", "GPIO44/nCTS1/JTDI2/BU1CTS",
+	"GPIO45/nDCD1/JTDO2", "GPIO46/nDSR1/JTCK2", "GPIO47/nRI1/JCP_RDY2",
+	"GPIO48/TXD2/BSPTXD", "GPIO49/RXD2/BSPRXD", "GPIO50/nCTS2", "GPO51/nRTS2/STRAP2",
+	"GPIO52/nDCD2", "GPO53/nDTR2_BOUT2/STRAP1", "GPIO54/nDSR2", "GPIO55/nRI2",
+	"GPIO56/R1RXERR", "GPIO57/R1MDC", "GPIO58/R1MDIO", "GPIO59/SMB3DSDA",
+	"GPIO60/SMB3DSCL", "GPO61/nDTR1_BOUT1/STRAP6", "GPO62/nRTST1/STRAP5",
+	"GPO63/TXD1/STRAP4", "GPIO64/FANIN0", "GPIO65/FANIN1", "GPIO66/FANIN2",
+	"GPIO67/FANIN3", "GPIO68/FANIN4", "GPIO69/FANIN5", "GPIO70/FANIN6", "GPIO71/FANIN7",
+	"GPIO72/FANIN8", "GPIO73/FANIN9", "GPIO74/FANIN10", "GPIO75/FANIN11",
+	"GPIO76/FANIN12", "GPIO77/FANIN13","GPIO78/FANIN14", "GPIO79/FANIN15",
+	"GPIO80/PWM0", "GPIO81/PWM1", "GPIO82/PWM2", "GPIO83/PWM3", "GPIO84/R2TXD0",
+	"GPIO85/R2TXD1", "GPIO86/R2TXEN", "GPIO87/R2RXD0", "GPIO88/R2RXD1", "GPIO89/R2CRSDV",
+	"GPIO90/R2RXERR", "GPIO91/R2MDC", "GPIO92/R2MDIO", "GPIO93/GA20/SMB5DSCL",
+	"GPIO94/nKBRST/SMB5DSDA", "GPIO95/nLRESET/nESPIRST", "GPIO96/RG1TXD0",
+	"GPIO97/RG1TXD1", "GPIO98/RG1TXD2", "GPIO99/RG1TXD3","GPIO100/RG1TXC",
+	"GPIO101/RG1TXCTL", "GPIO102/RG1RXD0", "GPIO103/RG1RXD1", "GPIO104/RG1RXD2",
+	"GPIO105/RG1RXD3", "GPIO106/RG1RXC", "GPIO107/RG1RXCTL", "GPIO108/RG1MDC",
+	"GPIO109/RG1MDIO", "GPIO110/RG2TXD0/DDRV0", "GPIO111/RG2TXD1/DDRV1",
+	"GPIO112/RG2TXD2/DDRV2", "GPIO113/RG2TXD3/DDRV3", "GPIO114/SMB0SCL",
+	"GPIO115/SMB0SDA", "GPIO116/SMB1SCL", "GPIO117/SMB1SDA", "GPIO118/SMB2SCL",
+	"GPIO119/SMB2SDA", "GPIO120/SMB2CSDA", "GPIO121/SMB2CSCL", "GPIO122/SMB2BSDA",
+	"GPIO123/SMB2BSCL", "GPIO124/SMB1CSDA", "GPIO125/SMB1CSCL","GPIO126/SMB1BSDA",
+	"GPIO127/SMB1BSCL", "GPIO128/SMB8SCL", "GPIO129/SMB8SDA", "GPIO130/SMB9SCL",
+	"GPIO131/SMB9SDA", "GPIO132/SMB10SCL", "GPIO133/SMB10SDA","GPIO134/SMB11SCL",
+	"GPIO135/SMB11SDA", "GPIO136/SD1DT0", "GPIO137/SD1DT1", "GPIO138/SD1DT2",
+	"GPIO139/SD1DT3", "GPIO140/SD1CLK", "GPIO141/SD1WP", "GPIO142/SD1CMD",
+	"GPIO143/SD1CD/SD1PWR", "GPIO144/PWM4",	"GPIO145/PWM5",	"GPIO146/PWM6",
+	"GPIO147/PWM7",	"GPIO148/MMCDT4", "GPIO149/MMCDT5", "GPIO150/MMCDT6",
+	"GPIO151/MMCDT7", "GPIO152/MMCCLK", "GPIO153/MMCWP", "GPIO154/MMCCMD",
+	"GPIO155/nMMCCD/nMMCRST", "GPIO156/MMCDT0", "GPIO157/MMCDT1", "GPIO158/MMCDT2",
+	"GPIO159/MMCDT3", "GPIO160/CLKOUT/RNGOSCOUT", "GPIO161/nLFRAME/nESPICS",
+	"GPIO162/SERIRQ", "GPIO163/LCLK/ESPICLK", "GPIO164/LAD0/ESPI_IO0",
+	"GPIO165/LAD1/ESPI_IO1", "GPIO166/LAD2/ESPI_IO2", "GPIO167/LAD3/ESPI_IO3",
+	"GPIO168/nCLKRUN/nESPIALERT", "GPIO169/nSCIPME", "GPIO170/nSMI", "GPIO171/SMB6SCL",
+	"GPIO172/SMB6SDA", "GPIO173/SMB7SCL", "GPIO174/SMB7SDA", "GPIO175/PSPI1CK/FANIN19",
+	"GPIO176/PSPI1DO/FANIN18", "GPIO177/PSPI1DI/FANIN17", "GPIO178/R1TXD0",
+	"GPIO179/R1TXD1", "GPIO180/R1TXEN", "GPIO181/R1RXD0", "GPIO182/R1RXD1",
+	"GPIO183/SPI3CK", "GPO184/SPI3D0/STRAP9", "GPO185/SPI3D1/STRAP10",
+	"GPIO186/nSPI3CS0", "GPIO187/nSPI3CS1",	"GPIO188/SPI3D2/nSPI3CS2",
+	"GPIO189/SPI3D3/nSPI3CS3", "GPIO190/nPRD_SMI", "GPIO191", "GPIO192", "GPIO193/R1CRSDV",
+	"GPIO194/SMB0BSCL", "GPIO195/SMB0BSDA", "GPIO196/SMB0CSCL", "GPIO197/SMB0DEN",
+	"GPIO198/SMB0DSDA", "GPIO199/SMB0DSCL", "GPIO200/R2CK", "GPIO201/R1CK",
+	"GPIO202/SMB0CSDA", "GPIO203/FANIN16", "GPIO204/DDC2SCL", "GPIO205/DDC2SDA",
+	"GPIO206/HSYNC2", "GPIO207/VSYNC2", "GPIO208/RG2TXC/DVCK", "GPIO209/RG2TXCTL/DDRV4",
+	"GPIO210/RG2RXD0/DDRV5", "GPIO211/RG2RXD1/DDRV6", "GPIO212/RG2RXD2/DDRV7",
+	"GPIO213/RG2RXD3/DDRV8", "GPIO214/RG2RXC/DDRV9", "GPIO215/RG2RXCTL/DDRV10",
+	"GPIO216/RG2MDC/DDRV11", "GPIO217/RG2MDIO/DVHSYNC", "GPIO218/nWDO1",
+	"GPIO219/nWDO2", "GPIO220/SMB12SCL", "GPIO221/SMB12SDA", "GPIO222/SMB13SCL",
+	"GPIO223/SMB13SDA", "GPIO224/SPIXCK", "GPO225/SPIXD0/STRAP12", "GPO226/SPIXD1/STRAP13",
+	"GPIO227/nSPIXCS0", "GPIO228/nSPIXCS1",	"GPO229/SPIXD2/STRAP3", "GPIO230/SPIXD3",
+	"GPIO231/nCLKREQ", "GPI255/DACOSEL"
+
+Optional Properties:
+ bias-disable, bias-pull-down, bias-pull-up, input-enable,
+ input-disable, output-high, output-low, drive-push-pull,
+ drive-open-drain, input-debounce, slew-rate, drive-strength
+
+ slew-rate valid arguments are:
+				<0> - slow
+				<1> - fast
+ drive-strength valid arguments are:
+				<2> - 2mA
+				<4> - 4mA
+				<8> - 8mA
+				<12> - 12mA
+				<16> - 16mA
+				<24> - 24mA
+
+For example, pinctrl might have pinmux subnodes like the following:
+
+	gpio0_iox1d1_pin: gpio0-iox1d1-pin {
+		pins = "GPIO0/IOX1DI";
+		output-high;
+	};
+	gpio0_iox1ck_pin: gpio0-iox1ck-pin {
+		pins = "GPIO2/IOX1CK";
+		output_high;
+	};
+
+=== Pin Group Subnode ===
+
+Required pin group subnode-properties:
+- groups : A string containing the name of the group to mux.
+- function: A string containing the name of the function to mux to the
+  group.
+
+The following are the list of the available groups and functions :
+	smb0, smb0b, smb0c, smb0d, smb0den, smb1, smb1b, smb1c, smb1d,
+	smb2, smb2b, smb2c, smb2d, smb3, smb3b, smb3c, smb3d, smb4, smb4b,
+	smb4c, smb4d, smb4den, smb5, smb5b, smb5c, smb5d, ga20kbc, smb6,
+	smb7, smb8, smb9, smb10, smb11, smb12, smb13, smb14, smb15, fanin0,
+	fanin1, fanin2, fanin3, fanin4, fanin5, fanin6, fanin7, fanin8,
+	fanin9, fanin10, fanin11 fanin12 fanin13, fanin14, fanin15, faninx,
+	pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, rg1, rg1mdio, rg2,
+	rg2mdio, ddr, uart1, uart2, bmcuart0a, bmcuart0b, bmcuart1, iox1,
+	iox2, ioxh, gspi, mmc, mmcwp, mmccd, mmcrst, mmc8, r1, r1err, r1md,
+	r2, r2err, r2md, sd1, sd1pwr, wdog1, wdog2, scipme, sci, serirq,
+	jtag2, spix, spixcs1, pspi1, pspi2, ddc, clkreq, clkout, spi3, spi3cs1,
+	spi3quad, spi3cs2, spi3cs3, spi0cs1, lpc, lpcclk, espi, lkgpo0, lkgpo1,
+	lkgpo2, nprd_smi
+
+For example, pinctrl might have group subnodes like the following:
+	r1err_pins: r1err-pins {
+		groups = "r1err";
+		function = "r1err";
+	};
+	r1md_pins: r1md-pins {
+		groups = "r1md";
+		function = "r1md";
+	};
+	r1_pins: r1-pins {
+		groups = "r1";
+		function = "r1";
+	};
+
+Examples
+========
+pinctrl: pinctrl@f0800000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "nuvoton,npcm750-pinctrl";
+	ranges = <0 0xf0010000 0x8000>;
+
+	gpio0: gpio@f0010000 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x0 0x80>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-ranges = <&pinctrl 0 0 32>;
+	};
+
+	....
+
+	gpio7: gpio@f0017000 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x7000 0x80>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-ranges = <&pinctrl 0 224 32>;
+	};
+
+	gpio0_iox1d1_pin: gpio0-iox1d1-pin {
+		pins = "GPIO0/IOX1DI";
+		output-high;
+	};
+
+	iox1_pins: iox1-pins {
+		groups = "iox1";
+		function = "iox1";
+	};
+	iox2_pins: iox2-pins {
+		groups = "iox2";
+		function = "iox2";
+	};
+
+	....
+
+	clkreq_pins: clkreq-pins {
+		groups = "clkreq";
+		function = "clkreq";
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
new file mode 100644
index 0000000000..7b7f840ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  # There are three kinds of subnodes:
+  # 1. a GPIO controller node for each GPIO bank
+  # 2. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+  # 3. a pinconf node configures properties of a single pin
+
+  "^gpio@[0-7]$":
+    type: object
+    additionalProperties: false
+
+    description:
+      Eight GPIO banks (gpio@0 to gpio@7), that each contain between 14 and 18
+      GPIOs. Some GPIOs support interrupts.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      interrupts:
+        maxItems: 3
+        description:
+          The interrupts associated with this GPIO bank
+
+    required:
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+  "^mux-":
+    $ref: pinmux-node.yaml#
+
+    properties:
+      groups:
+        description:
+          One or more groups of pins to mux to a certain function
+        items:
+          enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                  hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+                  clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+                  fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+                  fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                  pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+      function:
+        description:
+          The function that a group of pins is muxed to
+        enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+                dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+                gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+                fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+                pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+                hg2, hg3, hg4, hg5, hg6, hg7, gpio ]
+
+    dependencies:
+      groups: [ function ]
+      function: [ groups ]
+
+    additionalProperties: false
+
+  "^cfg-":
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          A list of pins to configure in certain ways, such as enabling
+          debouncing
+        items:
+          pattern: "^gpio1?[0-9]{1,2}$"
+
+      input-debounce: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pinctrl: pinctrl@b8003000 {
+      compatible = "nuvoton,wpcm450-pinctrl";
+      reg = <0xb8003000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio0: gpio@0 {
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+                     <3 IRQ_TYPE_LEVEL_HIGH>,
+                     <4 IRQ_TYPE_LEVEL_HIGH>;
+      };
+
+      mux-rmii2 {
+        groups = "rmii2";
+        function = "rmii2";
+      };
+
+      pinmux_uid: mux-uid {
+        groups = "gspi", "sspi";
+        function = "gpio";
+      };
+
+      pinctrl_uid: cfg-uid {
+        pins = "gpio14";
+        input-debounce = <1>;
+      };
+    };
+
+    gpio-keys {
+      compatible = "gpio-keys";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
+
+      button-uid {
+        label = "UID";
+        linux,code = <102>;
+        gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
new file mode 100644
index 0000000000..96c608bcb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of
+  the phrase "pin configuration node".
+
+  Tegra's pin configuration nodes act as a container for an arbitrary number
+  of subnodes. Each of these subnodes represents some desired configuration
+  for a pin, a group, or a list of pins or groups. This configuration can
+  include the mux function to select on those pin(s)/ group(s), and various
+  pin configuration parameters, such as pull-up, tristate, drive strength,
+  etc.
+
+  The name of each subnode is not important; all subnodes should be
+  enumerated and processed purely based on their content.
+
+  Each subnode only affects those parameters that are explicitly listed. In
+  other words, a subnode that lists a mux function but no pin configuration
+  parameters implies no information about any pin configuration parameters.
+
+  Similarly, a pin subnode that describes a pullup parameter implies no
+  information about e.g.  the mux function or tristate parameter. For this
+  reason, even seemingly boolean values are actually tristates in this
+  binding: unspecified, off, or on. Unspecified is represented as an absent
+  property, and off/on are represented as integer values 0 and 1.
+
+  Note that many of these properties are only valid for certain specific pins
+  or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+  details regarding which groups support which functionality. The Linux
+  pinctrl driver may also be a useful reference, since it consolidates,
+  disambiguates, and corrects data from all those sources.
+
+properties:
+  nvidia,pins:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: An array of strings. Each string contains the name of a pin
+      or group.  Valid values for these names are listed below.
+
+  nvidia,function:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: A string containing the name of the function to mux to the
+      pin or group. Valid values for function names are listed below. See the
+      Tegra TRM to determine which are valid for each pin or group.
+
+  nvidia,pull:
+    description: Pull-down/up setting to apply to the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: none
+        const: 0
+      - description: down
+        const: 1
+      - description: up
+        const: 2
+
+  nvidia,tristate:
+    description: Tristate setting to apply to the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: drive
+        const: 0
+      - description: tristate
+        const: 1
+
+  nvidia,schmitt:
+    description: Enable Schmitt trigger on the input.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable Schmitt trigger on the input
+        const: 0
+      - description: enable Schmitt trigger on the input
+        const: 1
+
+  nvidia,pull-down-strength:
+    description: Controls drive strength. 0 is weakest. The range of valid
+      values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pull-up-strength:
+    description: Controls drive strength. 0 is weakest. The range of valid
+      values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,high-speed-mode:
+    description: Enable high speed mode the pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: normal speed mode
+        const: 0
+      - description: high speed mode
+        const: 1
+
+  nvidia,low-power-mode:
+    description: Controls the drive power or current. Valid values are from 0
+      through 3, where 0 specifies the least power and 3 specifies the most
+      power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  nvidia,enable-input:
+    description: Enable the pin's input path.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable input (i.e. output only)
+        const: 0
+      - description: enable input
+        const: 1
+
+  nvidia,open-drain:
+    description: Open-drain configuration for the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable open-drain
+        const: 0
+      - description: enable open-drain
+        const: 1
+
+  nvidia,lock:
+    description: Lock the pin configuration against further changes until
+      reset.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: disable pin configuration lock
+        const: 0
+      - description: enable pin configuration lock
+        const: 1
+
+  nvidia,io-reset:
+    description: reset the I/O path
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+  nvidia,rcv-sel:
+    description: select VIL/VIH receivers
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: normal receivers
+        const: 0
+      - description: high-voltage receivers
+        const: 1
+
+  nvidia,drive-type:
+    description: Drive type to configure for the pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  nvidia,io-hv:
+    description: Select high-voltage receivers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - description: Use normal receivers.
+        const: 0
+      - description: Use high-voltage receivers.
+        const: 1
+
+  nvidia,slew-rate-rising:
+    description: Controls rising signal slew rate. 0 is fastest. The range of
+      valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,slew-rate-falling:
+    description: Controls falling signal slew rate. 0 is fastest. The range of
+      valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml
new file mode 100644
index 0000000000..1690c0ef55
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra114-pinmux
+
+  reg:
+    items:
+      - description: pad control registers
+      - description: mux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+                    ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+                    ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+                    ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+                    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+                    sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+                    clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+                    uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+                    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+                    uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4,
+                    dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+                    clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
+                    gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2,
+                    gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3,
+                    gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+                    gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+                    gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+                    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+                    gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1,
+                    gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3,
+                    gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+                    sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+                    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+                    sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+                    sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0,
+                    kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4,
+                    kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0,
+                    kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1,
+                    kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+                    kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5,
+                    core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0,
+                    dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2,
+                    clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2,
+                    dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+                    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+                    gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+                    gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+                    sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+                    sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
+                    sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3,
+                    usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5,
+                    sdmmc3_clk_lb_out_pee4, reset_out_n,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+                    drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_owr, drive_uda ]
+
+        nvidia,function:
+          enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+                  displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1,
+                  extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+                  i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+                  nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron,
+                  reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2,
+                  sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5,
+                  spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb,
+                  vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,rcv-sel: true
+        nvidia,drive-type: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pinmux@70000868 {
+        compatible = "nvidia,tegra114-pinmux";
+        reg = <0x70000868 0x148>, /* Pad control registers */
+              <0x70003000 0x40c>; /* PinMux registers */
+
+        pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <2>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml
new file mode 100644
index 0000000000..9b7368bd38
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra124 pinctrl binding is very similar to the Tegra20 and
+  Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and
+  nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a
+  baseline, and only documents the differences between the two bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra124-pinmux
+      - items:
+          - const: nvidia,tegra132-pinmux
+          - const: nvidia,tegra124-pinmux
+
+  reg:
+    items:
+      - description: driver strength and pad control registers
+      - description: pinmux registers
+      - description: MIPI_PAD_CTRL registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          $ref: /schemas/types.yaml#/definitions/string-array
+          items:
+            enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+                    ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+                    ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+                    ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+                    sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+                    sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+                    clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+                    uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+                    uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+                    uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4,
+                    dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+                    clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4,
+                    pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0,
+                    ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
+                    pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+                    sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+                    sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+                    sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+                    sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7,
+                    kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3,
+                    kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+                    kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3,
+                    kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7,
+                    kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3,
+                    kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7,
+                    clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
+                    clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
+                    dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4,
+                    spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4,
+                    dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+                    gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+                    gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+                    gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+                    sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+                    sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+                    pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6,
+                    hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
+                    gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
+                    usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4,
+                    sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n,
+                    kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2,
+                    dp_hpd_pff0,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+                    drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv,
+                    drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3,
+                    drive_ao0, drive_hv0, drive_sdio4, drive_ao4,
+                    # MIPI pad control groups
+                    mipi_pad_ctrl_dsi_b ]
+
+        nvidia,function:
+          enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+                  displaya, displaya_alt, displayb, dtv, extperiph1,
+                  extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+                  i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+                  owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1,
+                  rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc,
+                  spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
+                  uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+                  vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla,
+                  pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,rcv-sel: true
+        nvidia,drive-type: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@70000868 {
+        compatible = "nvidia,tegra124-pinmux";
+        reg = <0x70000868 0x164>, /* Pad control registers */
+              <0x70003000 0x434>, /* Mux registers */
+              <0x70000820 0x8>;   /* MIPI pad control */
+
+        sdmmc4_default: pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <TEGRA_PIN_PULL_UP>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 0000000000..02e971c39d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,135 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+NOTE: It turns out that this binding isn't an accurate description of the XUSB
+pad controller. While the description is good enough for the functional subset
+required for PCIe and SATA, it lacks the flexibility to represent the features
+needed for USB. For the new binding, see ../phy/nvidia,tegra-xusb-padctl.txt.
+The binding described in this file is deprecated and should not be used.
+
+The Tegra XUSB pad controller manages a set of lanes, each of which can be
+assigned to one out of a set of different pads. Some of these pads have an
+associated PHY that must be powered up before the pad can be used.
+
+This document defines the device-specific binding for the XUSB pad controller.
+
+Refer to pinctrl-bindings.txt in this directory for generic information about
+pin controller device tree bindings and ../phy/phy-bindings.txt for details on
+how to describe and reference PHYs in device trees.
+
+Required properties:
+--------------------
+- compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl".
+  Otherwise, must contain '"nvidia,<chip>-xusb-padctl",
+  "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210.
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - padctl
+- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
+  See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+
+Lane muxing:
+------------
+
+Child nodes contain the pinmux configurations following the conventions from
+the pinctrl-bindings.txt document. Typically a single, static configuration is
+given and applied at boot time.
+
+Each subnode describes groups of lanes along with parameters and pads that
+they should be assigned to. The name of these subnodes is not important. All
+subnodes should be parsed solely based on their content.
+
+Each subnode only applies the parameters that are explicitly listed. In other
+words, if a subnode that lists a function but no pin configuration parameters
+implies no information about any pin configuration parameters. Similarly, a
+subnode that describes only an IDDQ parameter implies no information about
+what function the pins are assigned to. For this reason even seemingly boolean
+values are actually tristates in this binding: unspecified, off or on.
+Unspecified is represented as an absent property, and off/on are represented
+as integer values 0 and 1.
+
+Required properties:
+- nvidia,lanes: An array of strings. Each string is the name of a lane.
+
+Optional properties:
+- nvidia,function: A string that is the name of the function (pad) that the
+  pin or group should be assigned to. Valid values for function names are
+  listed below.
+- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+
+Note that not all of these properties are valid for all lanes. Lanes can be
+divided into three groups:
+
+  - otg-0, otg-1, otg-2:
+
+    Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
+
+    The nvidia,iddq property does not apply to this group.
+
+  - ulpi-0, hsic-0, hsic-1:
+
+    Valid functions for this group are: "snps", "xusb".
+
+    The nvidia,iddq property does not apply to this group.
+
+  - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
+
+    Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+
+
+Example:
+========
+
+SoC file extract:
+-----------------
+
+	padctl@7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		#phy-cells = <1>;
+	};
+
+Board file extract:
+-------------------
+
+	pcie-controller@1003000 {
+		...
+
+		phys = <&padctl 0>;
+		phy-names = "pcie";
+
+		...
+	};
+
+	...
+
+	padctl: padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml
new file mode 100644
index 0000000000..87b6f4f42f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pinmux
+      - nvidia,tegra194-pinmux-aon
+
+  reg:
+    items:
+      - description: pinmux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      unevaluatedProperties: false
+      properties:
+        nvidia,function:
+          enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1,
+                  displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp,
+                  dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3,
+                  extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8,
+                  i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi,
+                  nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0,
+                  rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs,
+                  soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc,
+                  uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+                  vgp6, wdt ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-pinmux
+    then:
+      patternProperties:
+        "^pinmux(-[a-z0-9-_]+)?$":
+          type: object
+          additionalProperties:
+            properties:
+              nvidia,pins:
+                description: An array of strings. Each string contains the name
+                  of a pin or group. Valid values for these names are listed
+                  below.
+
+                  Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins
+                  are part of PCIE C5 power partition. Client devices must
+                  enable this partition before accessing the configuration for
+                  these pins.
+                items:
+                  enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+                          dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+                          dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0,
+                          cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1,
+                          qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+                          qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+                          qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+                          qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+                          eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+                          eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+                          eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+                          eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+                          soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2,
+                          soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5,
+                          soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0,
+                          soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3,
+                          uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+                          dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1,
+                          dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+                          sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+                          sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+                          pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+                          pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+                          pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+                          pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+                          pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+                          pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0,
+                          dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+                          dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5,
+                          soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0,
+                          soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0,
+                          sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3,
+                          sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0,
+                          extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+                          soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6,
+                          soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1,
+                          soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4,
+                          soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7,
+                          soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2,
+                          uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+                          dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2,
+                          dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5,
+                          soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0,
+                          dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3,
+                          dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6,
+                          dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0,
+                          directdc1_in_pv1, directdc1_out0_pv2,
+                          directdc1_out1_pv3, directdc1_out2_pv4,
+                          directdc1_out3_pv5, directdc1_out4_pv6,
+                          directdc1_out5_pv7, directdc1_out6_pw0,
+                          directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1,
+                          gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5,
+                          uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+                          spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+                          spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+                          uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+                          usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+                          spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+                          ufs0_ref_clk_pff0, ufs0_rst_pff1,
+                          pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1,
+                          directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs,
+                          sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4,
+                          sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0,
+                          sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp,
+                          sdmmc3_hv_trim, eqos_comp, qspi_comp,
+                          # drive groups
+                          drive_soc_gpio33_pt0, drive_soc_gpio32_ps7,
+                          drive_soc_gpio31_ps6, drive_soc_gpio30_ps5,
+                          drive_aud_mclk_ps4, drive_dap1_fs_ps3,
+                          drive_dap1_din_ps2, drive_dap1_dout_ps1,
+                          drive_dap1_sclk_ps0, drive_dap3_fs_pt4,
+                          drive_dap3_din_pt3, drive_dap3_dout_pt2,
+                          drive_dap3_sclk_pt1, drive_dap5_fs_pu0,
+                          drive_dap5_din_pt7, drive_dap5_dout_pt6,
+                          drive_dap5_sclk_pt5, drive_dap6_fs_pa3,
+                          drive_dap6_din_pa2, drive_dap6_dout_pa1,
+                          drive_dap6_sclk_pa0, drive_dap4_fs_pa7,
+                          drive_dap4_din_pa6, drive_dap4_dout_pa5,
+                          drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1,
+                          drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3,
+                          drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4,
+                          drive_soc_gpio41_pq5, drive_soc_gpio42_pq6,
+                          drive_soc_gpio43_pq7, drive_soc_gpio44_pr0,
+                          drive_soc_gpio45_pr1, drive_soc_gpio20_pq0,
+                          drive_soc_gpio21_pq1, drive_soc_gpio22_pq2,
+                          drive_soc_gpio23_pq3, drive_soc_gpio04_pp4,
+                          drive_soc_gpio05_pp5, drive_soc_gpio06_pp6,
+                          drive_soc_gpio07_pp7, drive_uart1_cts_pr5,
+                          drive_uart1_rts_pr4, drive_uart1_rx_pr3,
+                          drive_uart1_tx_pr2, drive_dap2_din_pi1,
+                          drive_dap2_dout_pi0, drive_dap2_fs_pi2,
+                          drive_dap2_sclk_ph7, drive_uart4_cts_ph6,
+                          drive_uart4_rts_ph5, drive_uart4_rx_ph4,
+                          drive_uart4_tx_ph3, drive_soc_gpio03_pg3,
+                          drive_soc_gpio02_pg2, drive_soc_gpio01_pg1,
+                          drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3,
+                          drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4,
+                          drive_soc_gpio09_pg5, drive_soc_gpio10_pg6,
+                          drive_soc_gpio11_pg7, drive_soc_gpio12_ph0,
+                          drive_soc_gpio13_ph1, drive_soc_gpio14_ph2,
+                          drive_soc_gpio50_pm5, drive_soc_gpio51_pm6,
+                          drive_soc_gpio52_pm7, drive_soc_gpio53_pn0,
+                          drive_soc_gpio54_pn1, drive_soc_gpio55_pn2,
+                          drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1,
+                          drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3,
+                          drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4,
+                          drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+                          drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+                          drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+                          drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+                          drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+                          drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0,
+                          drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1,
+                          drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0,
+                          drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+                          drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+                          drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5,
+                          drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3,
+                          drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1,
+                          drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0,
+                          drive_spi3_miso_py1, drive_spi1_cs0_pz6,
+                          drive_spi3_cs0_py3, drive_spi1_miso_pz4,
+                          drive_spi3_cs1_py4, drive_gp_pwm3_px3,
+                          drive_gp_pwm2_px2, drive_spi1_sck_pz3,
+                          drive_spi3_sck_py0, drive_spi1_cs1_pz7,
+                          drive_spi1_mosi_pz5, drive_spi3_mosi_py2,
+                          drive_cv_pwr_req_px1, drive_uart2_tx_px4,
+                          drive_uart2_rx_px5, drive_uart2_rts_px6,
+                          drive_uart2_cts_px7, drive_uart5_rx_py6,
+                          drive_uart5_tx_py5, drive_uart5_rts_py7,
+                          drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1,
+                          drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1,
+                          drive_ufs0_ref_clk_pff0 ]
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-pinmux-aon
+    then:
+      patternProperties:
+        "^pinmux(-[a-z0-9-_]+)?$":
+          type: object
+          additionalProperties:
+            properties:
+              nvidia,pins:
+                items:
+                  enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2,
+                          can0_din_paa3, can0_stb_paa4, can0_en_paa5,
+                          can0_wake_paa6, can0_err_paa7, can1_stb_pbb0,
+                          can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3,
+                          spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+                          spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+                          uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+                          gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+                          safe_state_pee0, vcomp_alert_pee1,
+                          ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+                          pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n,
+                          shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in,
+                          # drive groups
+                          drive_shutdown_n, drive_pmu_int_n,
+                          drive_safe_state_pee0, drive_vcomp_alert_pee1,
+                          drive_soc_pwr_req, drive_batt_oc_pee3,
+                          drive_clk_32k_in, drive_power_on_pee4,
+                          drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6,
+                          drive_ao_retention_n_pee2, drive_touch_clk_pcc4,
+                          drive_uart3_rx_pcc6, drive_uart3_tx_pcc5,
+                          drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1,
+                          drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7,
+                          drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0,
+                          drive_spi2_sck_pcc0, drive_spi2_miso_pcc1,
+                          drive_can1_dout_paa0, drive_can1_din_paa1,
+                          drive_can0_dout_paa2, drive_can0_din_paa3,
+                          drive_can0_stb_paa4, drive_can0_en_paa5,
+                          drive_can0_wake_paa6, drive_can0_err_paa7,
+                          drive_can1_stb_pbb0, drive_can1_en_pbb1,
+                          drive_can1_wake_pbb2, drive_can1_err_pbb3 ]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@2430000 {
+        compatible = "nvidia,tegra194-pinmux";
+        reg = <0x2430000 0x17000>;
+
+        pinctrl-names = "pex_rst";
+        pinctrl-0 = <&pex_rst_c5_out_state>;
+
+        pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+            pex_rst {
+                nvidia,pins = "pex_l5_rst_n_pgg1";
+                nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml
new file mode 100644
index 0000000000..63cd743a30
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-pinmux
+
+  reg:
+    items:
+      - description: tri-state registers
+      - description: mux register
+      - description: pull-up/down registers
+      - description: pad control registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
+                    dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
+                    gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
+                    irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
+                    ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
+                    ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
+                    lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
+                    lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
+                    sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
+                    spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
+                    uad, uca, ucb, uda,
+                    # tristate groups
+                    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
+                    lc, ld17_0, ld19_18, ld21_20, ld23_22,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
+                    drive_cdev2, drive_csus, drive_dap1, drive_dap2,
+                    drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
+                    drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+                    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
+                    drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
+                    drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
+                    drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]
+
+        nvidia,function:
+          enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
+                  dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
+                  gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
+                  mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
+                  pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
+                  pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
+                  sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
+                  spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+                  vi, vi_sensor_clk, xio ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@70000000 {
+        compatible = "nvidia,tegra20-pinmux";
+        reg = <0x70000014 0x10>, /* Tri-state registers */
+              <0x70000080 0x20>, /* Mux registers */
+              <0x700000a0 0x14>, /* Pull-up/down registers */
+              <0x70000868 0xa8>; /* Pad control registers */
+
+        pinmux {
+            atb {
+                nvidia,pins = "atb", "gma", "gme";
+                nvidia,function = "sdio4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
new file mode 100644
index 0000000000..e99387a6da
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra210-pinmux
+
+  reg:
+    items:
+      - description: APB_MISC_GP_*_PADCTRL register (pad control)
+      - description: PINMUX_AUX_* registers (pinmux)
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3,
+                    ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4,
+                    bt_wake_ap_ph5, button_home_py1, button_power_on_px5,
+                    button_slide_sw_py0, button_vol_down_px7,
+                    button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7,
+                    cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0,
+                    cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2,
+                    cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5,
+                    clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
+                    dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2,
+                    dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5,
+                    dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0,
+                    dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4,
+                    dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
+                    gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2,
+                    gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1,
+                    gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2,
+                    gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1,
+                    jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3,
+                    lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0,
+                    motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6,
+                    pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
+                    pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6,
+                    pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
+                    pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2,
+                    pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
+                    qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
+                    sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1,
+                    sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3,
+                    sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1,
+                    sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
+                    sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2,
+                    spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0,
+                    spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5,
+                    spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0,
+                    spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
+                    touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2,
+                    uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2,
+                    uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3,
+                    uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6,
+                    uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
+                    usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1,
+                    wifi_wake_ap_ph2,
+                    # drive groups
+                    drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6,
+                    drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4,
+                    drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1,
+                    drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4,
+                    drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3,
+                    drive_sdmmc4 ]
+
+        nvidia,function:
+          enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya,
+                  displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1,
+                  i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b,
+                  i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0,
+                  pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
+                  sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2,
+                  spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd,
+                  usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux: pinmux@70000800 {
+        compatible = "nvidia,tegra210-pinmux";
+        reg = <0x700008d4 0x02a8>, /* Pad control registers */
+              <0x70003000 0x1000>; /* Mux registers */
+
+        pinctrl-names = "boot";
+        pinctrl-0 = <&state_boot>;
+
+        state_boot: pinmux {
+            gen1_i2c_scl_pj1 {
+                nvidia,pins = "gen1_i2c_scl_pj1";
+                nvidia,function = "i2c1";
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+                nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
new file mode 100644
index 0000000000..f3deda9f71
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 AON Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra234-pinmux-aon
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2,
+                    can1_din_paa3, can0_stb_paa4, can0_en_paa5,
+                    soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0,
+                    can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3,
+                    spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+                    spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+                    uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+                    gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+                    sce_error_pee0, vcomp_alert_pee1,
+                    ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+                    soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7,
+                    hdmi_cec_pgg0,
+                    # drive groups
+                    drive_touch_clk_pcc4, drive_uart3_rx_pcc6,
+                    drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2,
+                    drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2,
+                    drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3,
+                    drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0,
+                    drive_spi2_miso_pcc1, drive_can1_dout_paa2,
+                    drive_can1_din_paa3, drive_can0_dout_paa0,
+                    drive_can0_din_paa1, drive_can0_stb_paa4,
+                    drive_can0_en_paa5, drive_soc_gpio49_paa6,
+                    drive_can0_err_paa7, drive_can1_stb_pbb0,
+                    drive_can1_en_pbb1, drive_soc_gpio50_pbb2,
+                    drive_can1_err_pbb3, drive_sce_error_pee0,
+                    drive_batt_oc_pee3, drive_bootv_ctl_n_pee7,
+                    drive_power_on_pee4, drive_soc_gpio26_pee5,
+                    drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
+                    drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@c300000 {
+      compatible = "nvidia,tegra234-pinmux-aon";
+      reg = <0xc300000 0x4000>;
+
+      pinctrl-names = "cec";
+      pinctrl-0 = <&cec_state>;
+
+      cec_state: pinmux-cec {
+        cec {
+          nvidia,pins = "hdmi_cec_pgg0";
+          nvidia,function = "gp";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
new file mode 100644
index 0000000000..4f9de78085
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  reg:
+    items:
+      - description: pinmux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      # We would typically use unevaluatedProperties here but that has the
+      # downside that all the properties in the common bindings become valid
+      # for all chip generations. In this case, however, we want the per-SoC
+      # bindings to be able to override which of the common properties are
+      # allowed, since not all pinmux generations support the same sets of
+      # properties. This way, the common bindings define the format of the
+      # properties but the per-SoC bindings define which of them apply to a
+      # given chip.
+      additionalProperties: false
+      properties:
+        nvidia,function:
+          enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+                  eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+                  pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+                  sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+                  usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+                  i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+                  dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+                  ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+                  displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+                  tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+        # out of the common properties, only these are allowed for Tegra234
+        nvidia,pins: true
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,drive-type: true
+        nvidia,io-hv: true
+
+      required:
+        - nvidia,pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
new file mode 100644
index 0000000000..17b865ecfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra234-pinmux
+
+patternProperties:
+  "^pinmux(-[a-z0-9-]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+                    dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+                    dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0,
+                    qspi0_sck_pc0, qspi0_cs_n_pc1,
+                    qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+                    qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+                    qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+                    qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+                    eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+                    eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+                    eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+                    eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+                    soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2,
+                    soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5,
+                    soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0,
+                    soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3,
+                    uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+                    soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1,
+                    soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+                    cpu_pwr_req_pi5, soc_gpio07_pi6,
+                    sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+                    sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+                    pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+                    pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+                    pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+                    pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+                    pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+                    pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0,
+                    dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+                    dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5,
+                    soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0,
+                    soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3,
+                    dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6,
+                    dp_aux_ch3_p_pn7, extperiph1_clk_pp0,
+                    extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+                    soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6,
+                    pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1,
+                    soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4,
+                    soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7,
+                    soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2,
+                    uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+                    soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0,
+                    cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4,
+                    uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+                    spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+                    spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+                    uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+                    usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+                    spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+                    spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2,
+                    spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5,
+                    soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0,
+                    soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3,
+                    ufs0_ref_clk_pae0, ufs0_rst_n_pae1,
+                    pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1,
+                    pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3,
+                    pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1,
+                    pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3,
+                    pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5,
+                    pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7,
+                    sdmmc1_comp, eqos_comp, qspi_comp,
+                    # drive groups
+                    drive_soc_gpio08_pb0, drive_soc_gpio36_pm5,
+                    drive_soc_gpio53_pm6, drive_soc_gpio55_pm4,
+                    drive_soc_gpio38_pm7, drive_soc_gpio39_pn1,
+                    drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0,
+                    drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2,
+                    drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3,
+                    drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5,
+                    drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7,
+                    drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4,
+                    drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+                    drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+                    drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+                    drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+                    drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+                    drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0,
+                    drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2,
+                    drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6,
+                    drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0,
+                    drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2,
+                    drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4,
+                    drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0,
+                    drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+                    drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+                    drive_sdmmc1_dat0_pj2 ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+    pinmux@2430000 {
+        compatible = "nvidia,tegra234-pinmux";
+        reg = <0x2430000 0x17000>;
+
+        pinctrl-names = "pex_rst";
+        pinctrl-0 = <&pex_rst_c5_out_state>;
+
+        pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+            pexrst {
+                nvidia,pins = "pex_l5_rst_n_paf1";
+                nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+                nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+                nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+                nvidia,tristate = <TEGRA_PIN_DISABLE>;
+                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml
new file mode 100644
index 0000000000..36c8f3301a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 pinmux Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra30-pinmux
+
+  reg:
+    items:
+      - description: pad control registers
+      - description: mux registers
+
+patternProperties:
+  "^pinmux(-[a-z0-9-_]+)?$":
+    type: object
+
+    # pin groups
+    additionalProperties:
+      $ref: nvidia,tegra-pinmux-common.yaml
+      additionalProperties: false
+      properties:
+        nvidia,pins:
+          items:
+            enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2,
+                    dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6,
+                    sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2,
+                    lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+                    sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0,
+                    lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3,
+                    gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6,
+                    gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1,
+                    lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5,
+                    vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1,
+                    lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6,
+                    lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2,
+                    lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6,
+                    lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+                    gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+                    gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+                    gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+                    gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2,
+                    gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6,
+                    gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2,
+                    lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+                    uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1,
+                    gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5,
+                    spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2,
+                    vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7,
+                    lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+                    lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7,
+                    dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3,
+                    lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7,
+                    ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+                    ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5,
+                    ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1,
+                    dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5,
+                    dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1,
+                    kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+                    kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1,
+                    kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5,
+                    kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1,
+                    kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5,
+                    kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+                    vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5,
+                    gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4,
+                    pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4,
+                    ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0,
+                    lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+                    clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0,
+                    spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4,
+                    spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0,
+                    ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4,
+                    sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+                    sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3,
+                    lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6,
+                    pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1,
+                    sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+                    sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+                    cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+                    pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3,
+                    sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6,
+                    pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0,
+                    pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3,
+                    pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+                    pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0,
+                    clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in,
+                    core_pwr_req, cpu_pwr_req, owr, pwr_int_n,
+                    # drive groups
+                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+                    drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec,
+                    drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3,
+                    drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma,
+                    drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf,
+                    drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2,
+                    drive_owr, drive_sdio1, drive_sdio2, drive_sdio3,
+                    drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+                    drive_uda, drive_vi1 ]
+
+        nvidia,function:
+          enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req,
+                  cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv,
+                  extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp,
+                  hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2,
+                  i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie,
+                  pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3,
+                  rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif,
+                  spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test,
+                  trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2,
+                  vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ]
+
+        nvidia,pull: true
+        nvidia,tristate: true
+        nvidia,schmitt: true
+        nvidia,pull-down-strength: true
+        nvidia,pull-up-strength: true
+        nvidia,high-speed-mode: true
+        nvidia,low-power-mode: true
+        nvidia,enable-input: true
+        nvidia,open-drain: true
+        nvidia,lock: true
+        nvidia,io-reset: true
+        nvidia,slew-rate-rising: true
+        nvidia,slew-rate-falling: true
+
+      required:
+        - nvidia,pins
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    pinctrl@70000000 {
+        compatible = "nvidia,tegra30-pinmux";
+        reg = <0x70000868 0x0d0>, /* Pad control registers */
+              <0x70003000 0x3e0>; /* Mux registers */
+
+        pinmux {
+            sdmmc4_clk_pcc4 {
+                nvidia,pins = "sdmmc4_clk_pcc4",
+                              "sdmmc4_rst_n_pcc3";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <0>;
+                nvidia,tristate = <0>;
+            };
+
+            sdmmc4_dat0_paa0 {
+                nvidia,pins = "sdmmc4_dat0_paa0",
+                              "sdmmc4_dat1_paa1",
+                              "sdmmc4_dat2_paa2",
+                              "sdmmc4_dat3_paa3",
+                              "sdmmc4_dat4_paa4",
+                              "sdmmc4_dat5_paa5",
+                              "sdmmc4_dat6_paa6",
+                              "sdmmc4_dat7_paa7";
+                nvidia,function = "sdmmc4";
+                nvidia,pull = <2>;
+                nvidia,tristate = <0>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
new file mode 100644
index 0000000000..bd8b0c69fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
@@ -0,0 +1,71 @@
+NXP LPC18xx/43xx SCU pin controller Device Tree Bindings
+--------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "nxp,lpc1850-scu"
+- reg			: Address and length of the register set for the device
+- clocks		: Clock specifier (see clock bindings for details)
+
+The lpc1850-scu driver uses the generic pin multiplexing and generic pin
+configuration documented in pinctrl-bindings.txt.
+
+The following generic nodes are supported:
+ - function
+ - pins
+ - bias-disable
+ - bias-pull-up
+ - bias-pull-down
+ - drive-strength
+ - input-enable
+ - input-disable
+ - input-schmitt-enable
+ - input-schmitt-disable
+ - slew-rate
+
+NXP specific properties:
+ - nxp,gpio-pin-interrupt : Assign pin to gpio pin interrupt controller
+			    irq number 0 to 7. See example below.
+
+Not all pins support all properties so either refer to the NXP 1850/4350
+user manual or the pin table in the pinctrl-lpc18xx driver for supported
+pin properties.
+
+Example:
+pinctrl: pinctrl@40086000 {
+	compatible = "nxp,lpc1850-scu";
+	reg = <0x40086000 0x1000>;
+	clocks = <&ccu1 CLK_CPU_SCU>;
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-disable;
+		};
+	};
+
+	gpio_joystick_pins: gpio-joystick-pins {
+		gpio_joystick_1_cfg {
+			pins =  "p9_0";
+			function = "gpio";
+			nxp,gpio-pin-interrupt = <0>;
+			input-enable;
+			bias-disable;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
new file mode 100644
index 0000000000..d49aafd8c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2 pin controller
+
+maintainers:
+  - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
+  - Chester Lin <clin@suse.com>
+
+description: |
+  S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
+  whose memory map is split into two regions:
+    SIUL2_0 @ 0x4009c000
+    SIUL2_1 @ 0x44010000
+
+  Every SIUL2 region has multiple register types, and here only MSCR and
+  IMCR registers need to be revealed for kernel to configure pinmux.
+
+  Please note that some register indexes are reserved in S32G2, such as
+  MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
+
+properties:
+  compatible:
+    enum:
+      - nxp,s32g2-siul2-pinctrl
+
+  reg:
+    description: |
+      A list of MSCR/IMCR register regions to be reserved.
+      - MSCR (Multiplexed Signal Configuration Register)
+        An MSCR register can configure the associated pin as either a GPIO pin
+        or a function output pin depends on the selected signal source.
+      - IMCR (Input Multiplexed Signal Configuration Register)
+        An IMCR register can configure the associated pin as function input
+        pin depends on the selected signal source.
+    items:
+      - description: MSCR registers group 0 in SIUL2_0
+      - description: MSCR registers group 1 in SIUL2_1
+      - description: MSCR registers group 2 in SIUL2_1
+      - description: IMCR registers group 0 in SIUL2_0
+      - description: IMCR registers group 1 in SIUL2_1
+      - description: IMCR registers group 2 in SIUL2_1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-grp[0-9]$':
+        type: object
+        allOf:
+          - $ref: pinmux-node.yaml#
+          - $ref: pincfg-node.yaml#
+        description: |
+          Pinctrl node's client devices specify pin muxes using subnodes,
+          which in turn use the standard properties below.
+
+        properties:
+          bias-disable: true
+          bias-high-impedance: true
+          bias-pull-up: true
+          bias-pull-down: true
+          drive-open-drain: true
+          input-enable: true
+          output-enable: true
+
+          pinmux:
+            description: |
+              An integer array for representing pinmux configurations of
+              a device. Each integer consists of a PIN_ID and a 4-bit
+              selected signal source(SSS) as IOMUX setting, which is
+              calculated as: pinmux = (PIN_ID << 4 | SSS)
+
+          slew-rate:
+            description: Supported slew rate based on Fmax values (MHz)
+            enum: [83, 133, 150, 166, 208]
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@4009c240 {
+        compatible = "nxp,s32g2-siul2-pinctrl";
+
+              /* MSCR0-MSCR101 registers on siul2_0 */
+        reg = <0x4009c240 0x198>,
+              /* MSCR112-MSCR122 registers on siul2_1 */
+              <0x44010400 0x2c>,
+              /* MSCR144-MSCR190 registers on siul2_1 */
+              <0x44010480 0xbc>,
+              /* IMCR0-IMCR83 registers on siul2_0 */
+              <0x4009ca40 0x150>,
+              /* IMCR119-IMCR397 registers on siul2_1 */
+              <0x44010c1c 0x45c>,
+              /* IMCR430-IMCR495 registers on siul2_1 */
+              <0x440110f8 0x108>;
+
+        llce-can0-pins {
+            llce-can0-grp0 {
+                pinmux = <0x2b0>;
+                input-enable;
+                slew-rate = <208>;
+            };
+
+            llce-can0-grp1 {
+                pinmux = <0x2c2>;
+                output-enable;
+                slew-rate = <208>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
new file mode 100644
index 0000000000..be81ed22a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Pin Configuration Node
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Many data items that are represented in a pin configuration node are common
+  and generic. Pin control bindings should use the properties defined below
+  where they are applicable; not all of these properties are relevant or useful
+  for all hardware or binding structures. Each individual binding document
+  should state which of these generic properties, if any, are used, and the
+  structure of the DT nodes that contain these properties.
+
+properties:
+  bias-disable:
+    type: boolean
+    description: disable any pin bias
+
+  bias-high-impedance:
+    type: boolean
+    description: high impedance mode ("third-state", "floating")
+
+  bias-bus-hold:
+    type: boolean
+    description: latch weakly
+
+  bias-pull-up:
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: pull up the pin. Takes as optional argument on hardware
+      supporting it the pull strength in Ohm.
+
+  bias-pull-down:
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: pull down the pin. Takes as optional argument on hardware
+      supporting it the pull strength in Ohm.
+
+  bias-pull-pin-default:
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description: use pin-default pull state. Takes as optional argument on
+      hardware supporting it the pull strength in Ohm.
+
+  drive-push-pull:
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        deprecated: true
+    description: drive actively high and low
+
+  drive-open-drain:
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1    # No known cases of 0
+        deprecated: true
+    description: drive with open drain
+
+  drive-open-source:
+    type: boolean
+    description: drive with open source
+
+  drive-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: sink or source at most X mA
+
+  drive-strength-microamp:
+    description: sink or source at most X uA
+
+  input-enable:
+    type: boolean
+    description: enable input on pin (no effect on output, such as
+      enabling an input buffer)
+
+  input-disable:
+    type: boolean
+    description: disable input on pin (no effect on output, such as
+      disabling an input buffer)
+
+  input-schmitt-enable:
+    type: boolean
+    description: enable schmitt-trigger mode
+
+  input-schmitt-disable:
+    type: boolean
+    description: disable schmitt-trigger mode
+
+  input-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Takes the debounce time in usec as argument or 0 to disable
+      debouncing
+
+  power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: select between different power supplies
+
+  low-power-enable:
+    type: boolean
+    description: enable low power mode
+
+  low-power-disable:
+    type: boolean
+    description: disable low power mode
+
+  output-disable:
+    type: boolean
+    description: disable output on a pin (such as disable an output buffer)
+
+  output-enable:
+    type: boolean
+    description: enable output on a pin without actively driving it
+      (such as enabling an output buffer)
+
+  output-impedance-ohms:
+    description: set the output impedance of a pin to at most X ohms
+
+  output-low:
+    type: boolean
+    description: set the pin to output mode with low level
+
+  output-high:
+    type: boolean
+    description: set the pin to output mode with high level
+
+  sleep-hardware-state:
+    type: boolean
+    description: indicate this is sleep related state which will be
+      programmed into the registers for the sleep state.
+
+  slew-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: set the slew rate
+
+  skew-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      this affects the expected clock skew on input pins
+      and the delay before latching a value to an output
+      pin. Typically indicates how many double-inverters are
+      used to delay the signal.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
new file mode 100644
index 0000000000..6904072d39
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -0,0 +1,109 @@
+== Introduction ==
+
+Hardware modules that control pin multiplexing or configuration parameters
+such as pull-up/down, tri-state, drive-strength etc are designated as pin
+controllers. Each pin controller must be represented as a node in device tree,
+just like any other hardware module.
+
+Hardware modules whose signals are affected by pin configuration are
+designated client devices. Again, each client device must be represented as a
+node in device tree, just like any other hardware module.
+
+For a client device to operate correctly, certain pin controllers must
+set up certain specific pin configurations. Some client devices need a
+single static pin configuration, e.g. set up during initialization. Others
+need to reconfigure pins at run-time, for example to tri-state pins when the
+device is inactive. Hence, each client device can define a set of named
+states. The number and names of those states is defined by the client device's
+own binding.
+
+The common pinctrl bindings defined in this file provide an infrastructure
+for client device device tree nodes to map those state names to the pin
+configuration used by those states.
+
+Note that pin controllers themselves may also be client devices of themselves.
+For example, a pin controller may set up its own "active" state when the
+driver loads. This would allow representing a board's static pin configuration
+in a single place, rather than splitting it across multiple client device
+nodes. The decision to do this or not somewhat rests with the author of
+individual board device tree files, and any requirements imposed by the
+bindings for the individual client devices in use by that board, i.e. whether
+they require certain specific named states for dynamic pin configuration.
+
+== Pinctrl client devices ==
+
+For each client device individually, every pin state is assigned an integer
+ID. These numbers start at 0, and are contiguous. For each state ID, a unique
+property exists to define the pin configuration. Each state may also be
+assigned a name. When names are used, another property exists to map from
+those names to the integer IDs.
+
+Each client device's own binding determines the set of states that must be
+defined in its device tree node, and whether to define the set of state
+IDs that must be provided, or whether to define the set of state names that
+must be provided.
+
+Required properties:
+pinctrl-0:	List of phandles, each pointing at a pin configuration
+		node. These referenced pin configuration nodes must be child
+		nodes of the pin controller that they configure. Multiple
+		entries may exist in this list so that multiple pin
+		controllers may be configured, or so that a state may be built
+		from multiple nodes for a single pin controller, each
+		contributing part of the overall configuration. See the next
+		section of this document for details of the format of these
+		pin configuration nodes.
+
+		In some cases, it may be useful to define a state, but for it
+		to be empty. This may be required when a common IP block is
+		used in an SoC either without a pin controller, or where the
+		pin controller does not affect the HW module in question. If
+		the binding for that IP block requires certain pin states to
+		exist, they must still be defined, but may be left empty.
+
+Optional properties:
+pinctrl-1:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+...
+pinctrl-n:	List of phandles, each pointing at a pin configuration
+		node within a pin controller.
+pinctrl-names:	The list of names to assign states. List entry 0 defines the
+		name for integer state ID 0, list entry 1 for state ID 1, and
+		so on.
+
+For example:
+
+	/* For a client device requiring named states */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
+	};
+
+	/* For the same device if using state IDs */
+	device {
+		pinctrl-0 = <&state_0_node_a>;
+		pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
+	};
+
+	/*
+	 * For an IP block whose binding supports pin configuration,
+	 * but in use on an SoC that doesn't have any pin control hardware
+	 */
+	device {
+		pinctrl-names = "active", "idle";
+		pinctrl-0 = <>;
+		pinctrl-1 = <>;
+	};
+
+== Pin controller devices ==
+
+See pinctrl.yaml
+
+== Generic pin multiplexing node content ==
+
+See pinmux-node.yaml
+
+== Generic pin configuration node content ==
+
+See pincfg-node.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
new file mode 100644
index 0000000000..28fbca1800
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
@@ -0,0 +1,127 @@
+Pincontrol driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has 8 GPIO pins which can be configured as GPIO as well as the
+special IO functions.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+		<pinctrl-bindings.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- pins: List of pins. Valid values of pins properties are:
+		      gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7.
+
+Optional properties:
+-------------------
+Following are optional properties defined as pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of properties will leave the configuration
+on default.
+	function,
+	drive-push-pull,
+	drive-open-drain,
+	bias-pull-up,
+	bias-pull-down.
+
+Valid values for function properties are:
+	gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in,
+	reference-out
+
+There are also customised properties for the GPIO1, GPIO2 and GPIO3. These
+customised properties are required to configure FPS configuration parameters
+of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more
+detail of Flexible Power Sequence (FPS).
+
+- maxim,active-fps-source:		FPS source for the GPIOs to get
+					enabled/disabled when system is in
+					active state.  Valid values are:
+					- MAX77620_FPS_SRC_0,
+						FPS source is FPS0.
+					- MAX77620_FPS_SRC_1,
+						FPS source is FPS1
+					- MAX77620_FPS_SRC_2 and
+						FPS source is FPS2
+					- MAX77620_FPS_SRC_NONE.
+						GPIO is not controlled
+						by FPS events and it gets
+						enabled/disabled by register
+						access.
+					Absence of this property will leave
+					the FPS configuration register for that
+					GPIO to default configuration.
+
+- maxim,active-fps-power-up-slot:	Sequencing event slot number on which
+					the GPIO get enabled when
+					master FPS input event set to HIGH.
+					Valid values are 0 to 7.
+					This is applicable if FPS source is
+					selected as FPS0, FPS1 or FPS2.
+
+- maxim,active-fps-power-down-slot:	Sequencing event slot number on which
+					the GPIO get disabled when master
+					FPS input event set to LOW.
+					Valid values are 0 to 7.
+					This is applicable if FPS source is
+					selected as FPS0, FPS1 or FPS2.
+
+- maxim,suspend-fps-source:		This is same as property
+					"maxim,active-fps-source" but value
+					get configured when system enters in
+					to suspend state.
+
+- maxim,suspend-fps-power-up-slot:	This is same as property
+					"maxim,active-fps-power-up-slot" but
+					this value get configured into FPS
+					configuration register when system
+					enters into suspend.
+					This is applicable if suspend state
+					FPS source is selected as FPS0, FPS1 or
+
+- maxim,suspend-fps-power-down-slot:	This is same as property
+					"maxim,active-fps-power-down-slot" but
+					this value get configured into FPS
+					configuration register when system
+					enters into suspend.
+					This is applicable if suspend state
+					FPS source is selected as FPS0, FPS1 or
+					FPS2.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spmic_default>;
+
+	spmic_default: pinmux@0 {
+		pin_gpio0 {
+			pins = "gpio0";
+			function = "gpio";
+		};
+
+		pin_gpio1 {
+			pins = "gpio1";
+			function = "fps-out";
+			maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+		};
+
+		pin_gpio2 {
+			pins = "gpio2";
+			function = "fps-out";
+			maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
new file mode 100644
index 0000000000..2fa5edac7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -0,0 +1,148 @@
+Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
+8-/16-bit I/O expander with serial interface (I2C/SPI)
+
+Required properties:
+- compatible : Should be
+    - "mcp,mcp23s08" (DEPRECATED) for  8 GPIO SPI version
+    - "mcp,mcp23s17" (DEPRECATED) for 16 GPIO SPI version
+    - "mcp,mcp23008" (DEPRECATED) for  8 GPIO I2C version or
+    - "mcp,mcp23017" (DEPRECATED) for 16 GPIO I2C version of the chip
+
+    - "microchip,mcp23s08" for  8 GPIO SPI version
+    - "microchip,mcp23s17" for 16 GPIO SPI version
+    - "microchip,mcp23s18" for 16 GPIO SPI version
+    - "microchip,mcp23008" for  8 GPIO I2C version or
+    - "microchip,mcp23017" for 16 GPIO I2C version of the chip
+    - "microchip,mcp23018" for 16 GPIO I2C version
+    NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
+    removed.
+- #gpio-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify flags as described in
+    'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by
+    'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW).
+- gpio-controller : Marks the device node as a GPIO controller.
+- reg : For an address on its bus. I2C uses this a the I2C address of the chip.
+        SPI uses this to specify the chipselect line which the chip is
+        connected to. The driver and the SPI variant of the chip support
+        multiple chips on the same chipselect. Have a look at
+        microchip,spi-present-mask below.
+
+Required device specific properties (only for SPI chips):
+- mcp,spi-present-mask (DEPRECATED)
+- microchip,spi-present-mask : This is a present flag, that makes only sense for SPI
+        chips - as the name suggests. Multiple SPI chips can share the same
+        SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a
+        chip connected with the corresponding spi address set. For example if
+        you have a chip with address 3 connected, you have to set bit3 to 1,
+        which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not
+        possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at
+        least one bit to 1 for SPI chips.
+    NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
+    removed.
+- spi-max-frequency = The maximum frequency this chip is able to handle
+
+Optional properties:
+- #interrupt-cells : Should be two.
+  - first cell is the pin number
+  - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as a interrupt controller.
+- drive-open-drain: Sets the ODR flag in the IOCON register. This configures
+        the IRQ output as open drain active low.
+- reset-gpios: Corresponds to the active-low RESET# pin for the chip
+
+Optional device specific properties:
+- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
+        with two interrupt outputs (these are the devices ending with 17 and
+        those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+        IO 8-15 are bank 2. These chips have two different interrupt outputs:
+        One for bank 1 and another for bank 2. If irq-mirror is set, both
+        interrupts are generated regardless of the bank that an input change
+        occurred on. If it is not set, the interrupt are only generated for the
+        bank they belong to.
+        On devices with only one interrupt output this property is useless.
+- microchip,irq-active-high: Sets the INTPOL flag in the IOCON register. This
+        configures the IRQ output polarity as active high.
+
+Example I2C (with interrupt):
+gpiom1: gpio@20 {
+        compatible = "microchip,mcp23017";
+        gpio-controller;
+        #gpio-cells = <2>;
+        reg = <0x20>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells=<2>;
+        microchip,irq-mirror;
+};
+
+Example SPI:
+gpiom1: gpio@0 {
+        compatible = "microchip,mcp23s17";
+        gpio-controller;
+        #gpio-cells = <2>;
+        microchip,spi-present-mask = <0x01>;
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+};
+
+Pull-up configuration
+=====================
+
+If pins are used as output, they can also be configured with pull-ups. This is
+done with pinctrl.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+		<pinctrl-bindings.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- pins: List of pins. Valid values of pins properties are:
+		      gpio0 ... gpio7 for the devices with 8 GPIO pins and
+		      gpio0 ... gpio15 for the devices with 16 GPIO pins.
+
+Optional properties:
+-------------------
+The following optional property is defined in the pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of this property will leave the configuration
+in its default state.
+	bias-pull-up
+
+Example with pinctrl to pull-up output pins:
+gpio21: gpio@21 {
+	compatible = "microchip,mcp23017";
+	gpio-controller;
+	#gpio-cells = <0x2>;
+	reg = <0x21>;
+	interrupt-parent = <&socgpio>;
+	interrupts = <0x17 0x8>;
+	interrupt-names = "mcp23017@21 irq";
+	interrupt-controller;
+	#interrupt-cells = <0x2>;
+	microchip,irq-mirror;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;
+	reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+	gpio21pullups: pinmux {
+		pins =	"gpio0", "gpio1", "gpio2", "gpio3",
+			"gpio4", "gpio5", "gpio6", "gpio7",
+			"gpio8", "gpio9", "gpio10", "gpio11",
+			"gpio12", "gpio13", "gpio14", "gpio15";
+		bias-pull-up;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
new file mode 100644
index 0000000000..c28d4eb83b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
@@ -0,0 +1,105 @@
+Palmas Pincontrol bindings
+
+The pins of Palmas device can be set on different option and provides
+the configuration for Pull UP/DOWN, open drain etc.
+
+Required properties:
+- compatible: It must be one of following:
+  - "ti,palmas-pinctrl" for Palma series of the pincontrol.
+  - "ti,tps65913-pinctrl" for Palma series device TPS65913.
+  - "ti,tps80036-pinctrl" for Palma series device TPS80036.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Palmas's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+list of pins. This configuration can include the mux function to select on
+those pin(s), and various pin configuration parameters, such as pull-up,
+open drain.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Optional properties:
+- ti,palmas-enable-dvfs1: Enable DVFS1. Configure pins for DVFS1 mode.
+	Selection primary or secondary function associated to I2C2_SCL_SCE,
+	I2C2_SDA_SDO pin/pad for DVFS1 interface
+- ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode.
+	Selection primary or secondary function associated to GPADC_START
+	and SYSEN2 pin/pad for DVFS2 interface
+- ti,palmas-override-powerhold: This is applicable for PMICs for which
+	GPIO7 is configured in POWERHOLD mode which has higher priority
+	over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
+	bit is turned off. This property enables driver to over ride the
+	POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
+	scenarios. So for GPIO7 if ti,palmas-override-powerhold is set
+	then the GPIO_7 field should never be muxed to anything else.
+	It should be set to POWERHOLD by default and only in case of
+	power off scenarios the driver will over ride the mux value.
+
+This binding uses the following generic properties as defined in
+pinctrl-bindings.txt:
+
+Required: pins
+Options: function, bias-disable, bias-pull-up, bias-pull-down,
+	 drive-open-drain.
+
+Note that many of these properties are only valid for certain specific pins.
+See the Palmas device datasheet for complete details regarding which pins
+support which functionality.
+
+Valid values for pin names are:
+	gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
+	gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, vac, powergood,
+	nreswarm, pwrdown, gpadc_start, reset_in, nsleep, enable1, enable2,
+	int.
+
+Valid value of function names are:
+	gpio, led, pwm, regen, sysen, clk32kgaudio, id, vbus_det, chrg_det,
+	vac, vacok, powergood, usb_psel, msecure, pwrhold, int, nreswarm,
+	simrsto, simrsti, low_vbat, wireless_chrg1, rcm, pwrdown, gpadc_start,
+	reset_in, nsleep, enable.
+
+There are 4 special functions: opt0, opt1, opt2 and opt3. If any of these
+functions is selected then directly pins register will be written with 0, 1, 2
+or 3 respectively if it is valid for that pins or list of pins.
+
+Example:
+	palmas: tps65913 {
+		....
+		pinctrl {
+			compatible = "ti,tps65913-pinctrl";
+			ti,palmas-enable-dvfs1;
+			pinctrl-names = "default";
+			pinctrl-0 = <&palmas_pins_state>;
+
+			palmas_pins_state: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "id";
+					bias-pull-up;
+				};
+
+				vac {
+					pins = "vac";
+					function = "vacok";
+					bias-pull-down;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "opt0";
+					drive-open-drain = <1>;
+				};
+			};
+		};
+		....
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
new file mode 100644
index 0000000000..6ad49e51c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -0,0 +1,63 @@
+Pincontrol driver for RK805 Power management IC.
+
+RK805 has 2 pins which can be configured as GPIO output only.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+		<pinctrl-bindings.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- #gpio-cells: Should be two. The first cell is the pin number and the
+  second is the GPIO flags.
+
+- gpio-controller: Marks the device node as a GPIO controller.
+
+- pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
+
+First 2 properties must be added in the RK805 PMIC node, documented in
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
+
+Optional properties:
+-------------------
+Following are optional properties defined as pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of properties will leave the configuration
+on default.
+	function,
+	output-low,
+	output-high.
+
+Valid values for function properties are: gpio.
+
+There are also not customised properties for any GPIO.
+
+Example:
+--------
+rk805: rk805@18 {
+	compatible = "rockchip,rk805";
+	...
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>, <&rk805_default>;
+
+	rk805_default: pinmux {
+		gpio01 {
+			pins = "gpio0", "gpio1";
+			function = "gpio";
+			output-high;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
new file mode 100644
index 0000000000..45a307d3ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Pin Controller with a Single Register for One or More Pins
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Some pin controller devices use a single register for one or more pins. The
+  range of pin control registers can vary from one to many for each controller
+  instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this
+  kind of pin controller instances.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - pinctrl-single
+          - pinconf-single
+      - items:
+          - enum:
+              - ti,am437-padconf
+              - ti,am654-padconf
+              - ti,dra7-padconf
+              - ti,omap2420-padconf
+              - ti,omap2430-padconf
+              - ti,omap3-padconf
+              - ti,omap4-padconf
+              - ti,omap5-padconf
+          - const: pinctrl-single
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#pinctrl-cells':
+    description:
+      Number of cells. Usually 2, consisting of register offset, pin configuration
+      value, and pinmux mode. Some controllers may use 1 for just offset and value.
+    enum: [ 1, 2 ]
+
+  pinctrl-single,bit-per-mux:
+    description: Optional flag to indicate register controls more than one pin
+    type: boolean
+
+  pinctrl-single,function-mask:
+    description: Mask of the allowed register bits
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pinctrl-single,function-off:
+    description: Optional function off mode for disabled state
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pinctrl-single,register-width:
+    description: Width of pin specific bits in the register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 16, 32 ]
+
+  pinctrl-single,gpio-range:
+    description: Optional list of pin base, nr pins & gpio function
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of a gpio-range node
+          - description: pin base
+          - description: number of pins
+          - description: gpio function
+
+  '#gpio-range-cells':
+    description: No longer needed, may exist in older files for gpio-ranges
+    deprecated: true
+    const: 3
+
+  gpio-range:
+    description: Optional node for gpio range cells
+    type: object
+    additionalProperties: false
+    properties:
+      '#pinctrl-single,gpio-range-cells':
+        description: Number of gpio range cells
+        const: 3
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  '-pins(-[0-9]+)?$|-pin$':
+    description:
+      Pin group node name using naming ending in -pins followed by an optional
+      instance number
+    type: object
+    additionalProperties: false
+
+    properties:
+      pinctrl-single,pins:
+        description:
+          Array of pins as described in pinmux-node.yaml for pinctrl-pin-array
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      pinctrl-single,bits:
+        description: Register bit configuration for pinctrl-single,bit-per-mux
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: register offset
+          - description: value
+          - description: pin bitmask in the register
+
+      pinctrl-single,bias-pullup:
+        description: Optional bias pull up configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: input
+          - description: enabled pull up bits
+          - description: disabled pull up bits
+          - description: bias pull up mask
+
+      pinctrl-single,bias-pulldown:
+        description: Optional bias pull down configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: input
+          - description: enabled pull down bits
+          - description: disabled pull down bits
+          - description: bias pull down mask
+
+      pinctrl-single,drive-strength:
+        description: Optional drive strength configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: drive strength current
+          - description: drive strength mask
+
+      pinctrl-single,input-schmitt:
+        description: Optional input schmitt configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: input
+          - description: enable bits
+          - description: disable bits
+          - description: input schmitt mask
+
+      pinctrl-single,low-power-mode:
+        description: Optional low power mode configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: low power mode value
+          - description: low power mode mask
+
+      pinctrl-single,slew-rate:
+        description: Optional slew rate configuration
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: slew rate
+          - description: slew rate mask
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - pinctrl-single,register-width
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      pinmux@4a100040 {
+        compatible = "pinctrl-single";
+        reg = <0x4a100040 0x0196>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #pinctrl-cells = <2>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        pinctrl-single,register-width = <16>;
+        pinctrl-single,function-mask = <0xffff>;
+        pinctrl-single,gpio-range = <&range 0 3 0>;
+        range: gpio-range {
+          #pinctrl-single,gpio-range-cells = <3>;
+        };
+
+        uart2-pins {
+          pinctrl-single,pins =
+            <0xd8 0x118>,
+            <0xda 0>,
+            <0xdc 0x118>,
+            <0xde 0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
new file mode 100644
index 0000000000..f8420520e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible	: "sirf,prima2-pinctrl"
+- reg		: Address range of the pinctrl registers
+- interrupts    : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+         uart {
+                 sirf,pins = "uart2grp";
+                 sirf,function = "uart2";
+         };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+         uart {
+                 sirf,pins = "uart2_nostreamctrlgrp";
+                 sirf,function = "uart2_nostreamctrl";
+         };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@b0070000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_noflow_pins_a>;
+}
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
new file mode 100644
index 0000000000..48b9be48af
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
@@ -0,0 +1,174 @@
+*ST pin controller.
+
+Each multi-function pin is controlled, driven and routed through the
+PIO multiplexing block. Each pin supports GPIO functionality (ALT0)
+and multiple alternate functions(ALT1 - ALTx) that directly connect
+the pin to different hardware blocks.
+
+When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and
+Pull Up (PU) are driven by the related PIO block.
+
+ST pinctrl driver controls PIO multiplexing block and also interacts with
+gpio driver to configure a pin.
+
+GPIO bank can have one of the two possible types of interrupt-wirings.
+
+First type is via irqmux, single interrupt is used by multiple gpio banks. This
+reduces number of overall interrupts numbers required. All these banks belong to
+a single pincontroller.
+		  _________
+		 |	   |----> [gpio-bank (n)    ]
+		 |	   |----> [gpio-bank (n + 1)]
+	[irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
+		 |	   |----> [gpio-bank (...  )]
+		 |_________|----> [gpio-bank (n + 7)]
+
+Second type has a dedicated interrupt per gpio bank.
+
+	[irqN]----> [gpio-bank (n)]
+
+
+Pin controller node:
+Required properties:
+- compatible	: should be "st,stih407-<pio-block>-pinctrl"
+- st,syscfg		: Should be a phandle of the syscfg node.
+- st,retime-pin-mask	: Should be mask to specify which pins can be retimed.
+	If the property is not present, it is assumed that all the pins in the
+	bank are capable of retiming. Retiming is mainly used to improve the
+	IO timing margins of external synchronous interfaces.
+- ranges : defines mapping between pin controller node (parent) to gpio-bank
+  node (children).
+
+Optional properties:
+- interrupts	: Interrupt number of the irqmux. If the interrupt is shared
+  with other gpio banks via irqmux.
+  a irqline and gpio banks.
+- reg		: irqmux memory resource. If irqmux is present.
+- reg-names	: irqmux resource should be named as "irqmux".
+
+GPIO controller/bank node.
+Required properties:
+- gpio-controller : Indicates this device is a GPIO controller
+- #gpio-cells	  : Must be two.
+     - First cell: specifies the pin number inside the controller
+     - Second cell: specifies whether the pin is logically inverted.
+       - 0 = active high
+       - 1 = active low
+- st,bank-name	  : Should be a name string for this bank as specified in
+  datasheet.
+
+Optional properties:
+- interrupts	: Interrupt number for this gpio bank. If there is a dedicated
+  interrupt wired up for this gpio bank.
+
+- interrupt-controller : Indicates this device is a interrupt controller. GPIO
+  bank can be an interrupt controller iff one of the interrupt type either via
+irqmux or a dedicated interrupt per bank is specified.
+
+- #interrupt-cells: the value of this property should be 2.
+     - First Cell: represents the external gpio interrupt number local to the
+       gpio interrupt space of the controller.
+     - Second Cell: flags to identify the type of the interrupt
+       - 1 = rising edge triggered
+       - 2 = falling edge triggered
+       - 3 = rising and falling edge triggered
+       - 4 = high level triggered
+       - 8 = low level triggered
+for related macros look in:
+include/dt-bindings/interrupt-controller/irq.h
+
+Example:
+	pin-controller-sbc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,stih407-sbc-pinctrl";
+		st,syscfg = <&syscfg_sbc>;
+		reg = <0x0961f080 0x4>;
+		reg-names = "irqmux";
+		interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+		interrupt-names = "irqmux";
+		ranges = <0 0x09610000 0x6000>;
+
+		pio0: gpio@9610000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x100>;
+			st,bank-name = "PIO0";
+		};
+		...
+		pin-functions nodes follow...
+	};
+
+
+Contents of function subnode node:
+----------------------
+Required properties for pin configuration node:
+- st,pins	: Child node with list of pins with configuration.
+
+Below is the format of how each pin conf should look like.
+
+<bank offset mux mode rt_type rt_delay rt_clk>
+
+Every PIO is represented with 4-7 parameters depending on retime configuration.
+Each parameter is explained as below.
+
+-bank		: Should be bank phandle to which this PIO belongs.
+-offset		: Offset in the PIO bank.
+-mux		: Should be alternate function number associated this pin.
+		Use same numbers from datasheet.
+-mode		:pin configuration is selected from one of the below values.
+		IN
+		IN_PU
+		OUT
+		BIDIR
+		BIDIR_PU
+
+-rt_type	Retiming Configuration for the pin.
+		Possible retime configuration are:
+
+		-------		-------------
+		value		args
+		-------		-------------
+		NICLK		<delay> <clk>
+		ICLK_IO		<delay> <clk>
+		BYPASS		<delay>
+		DE_IO		<delay> <clk>
+		SE_ICLK_IO	<delay> <clk>
+		SE_NICLK_IO	<delay> <clk>
+
+- delay	is retime delay in pico seconds as mentioned in data sheet.
+
+- rt_clk	:clk to be use for retime.
+		Possible values are:
+		CLK_A
+		CLK_B
+		CLK_C
+		CLK_D
+
+Example of mmcclk pin which is a bi-direction pull pu with retime config
+as non inverted clock retimed with CLK_B and delay of 0 pico seconds:
+
+pin-controller {
+	...
+	mmc0 {
+		pinctrl_mmc: mmc {
+			st,pins {
+				mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+				...
+			};
+		};
+	...
+	};
+};
+
+sdhci0:sdhci@fe810000{
+	...
+	interrupt-parent = <&pio3>;
+	#interrupt-cells = <2>;
+	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
+	interrupt-names = "card-detect";
+	pinctrl-names = "default";
+	pinctrl-0	= <&pinctrl_mmc>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
new file mode 100644
index 0000000000..b3aa90f0ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
@@ -0,0 +1,57 @@
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+	"wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters.
+	bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+  0: GPIO in
+  1: GPIO out
+  2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+  0: none
+  1: down
+  2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+	pinctrl: pinctrl {
+		compatible = "wm,wm8505-pinctrl";
+		reg = <0xD8110000 0x10000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
new file mode 100644
index 0000000000..d471563119
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Pin controller devices should contain the pin configuration nodes that client
+  devices reference.
+
+  The contents of each of those pin configuration child nodes is defined
+  entirely by the binding for the individual pin controller device. There
+  exists no common standard for this content. The pinctrl framework only
+  provides generic helper bindings that the pin controller driver can use.
+
+  The pin configuration nodes need not be direct children of the pin controller
+  device; they may be grandchildren, for example. Whether this is legal, and
+  whether there is any interaction between the child and intermediate parent
+  nodes, is again defined entirely by the binding for the individual pin
+  controller device.
+
+properties:
+  $nodename:
+    pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+  "#pinctrl-cells":
+    description: >
+      Number of pin control cells in addition to the index within the pin
+      controller device instance.
+
+  pinctrl-use-default:
+    type: boolean
+    description: >
+      Indicates that the OS can use the boot default pin configuration. This
+      allows using an OS that does not have a driver for the pin controller.
+      This property can be set either globally for the pin controller or in
+      child nodes for individual pin group control.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
new file mode 100644
index 0000000000..4586155969
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -0,0 +1,155 @@
+ST Microelectronics, SPEAr pinmux controller
+
+Required properties:
+- compatible	: "st,spear300-pinmux"
+		: "st,spear310-pinmux"
+		: "st,spear320-pinmux"
+		: "st,spear1310-pinmux"
+		: "st,spear1340-pinmux"
+- reg		: Address range of the pinctrl registers
+- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
+	- Its values for SPEAr300:
+		- NAND_MODE		: <0>
+		- NOR_MODE		: <1>
+		- PHOTO_FRAME_MODE	: <2>
+		- LEND_IP_PHONE_MODE	: <3>
+		- HEND_IP_PHONE_MODE	: <4>
+		- LEND_WIFI_PHONE_MODE	: <5>
+		- HEND_WIFI_PHONE_MODE	: <6>
+		- ATA_PABX_WI2S_MODE	: <7>
+		- ATA_PABX_I2S_MODE	: <8>
+		- CAML_LCDW_MODE	: <9>
+		- CAMU_LCD_MODE		: <10>
+		- CAMU_WLCD_MODE	: <11>
+		- CAML_LCD_MODE		: <12>
+	- Its values for SPEAr320:
+		- AUTO_NET_SMII_MODE	: <0>
+		- AUTO_NET_MII_MODE	: <1>
+		- AUTO_EXP_MODE		: <2>
+		- SMALL_PRINTERS_MODE	: <3>
+		- EXTENDED_MODE		: <4>
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
+of these subnodes represents muxing for a pin, a group, or a list of pins or
+groups.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required subnode-properties:
+- st,pins : An array of strings. Each string contains the name of a pin or
+  group.
+- st,function: A string containing the name of the function to mux to the pin or
+  group. See the SPEAr's TRM to determine which are valid for each pin or group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/spear/pinctrl-spear3*0.c
+
+Valid values for group names are:
+For All SPEAr3xx machines:
+	"firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp",
+	"gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp",
+	"gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp",
+	"timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp"
+
+For SPEAr300 machines:
+	"fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp",
+	"clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp",
+	"dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp",
+	"gpio1_0_to_3_grp", "gpio1_4_to_7_grp"
+
+For SPEAr310 machines:
+	"emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp",
+	"uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp"
+
+For SPEAr320 machines:
+	"clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp",
+	"sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp",
+	"uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp",
+	"uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp",
+	"uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp",
+	"uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp",
+	"uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp",
+	"uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp",
+	"uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp",
+	"uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp",
+	"uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp",
+	"can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp",
+	"pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp",
+	"pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp",
+	"pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp",
+	"pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp",
+	"pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp",
+	"pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp",
+	"ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp",
+	"ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp",
+	"ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp",
+	"rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
+	"i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
+
+For SPEAr1310 machines:
+	"i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+	"i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+	"smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+	"smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+	"nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+	"keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+	"gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+	"uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+	"uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+	"i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+	"i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+	"i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+	"can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+	"pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+	"ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+	"pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+	"keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+	"spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+	"pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+	"vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+	"cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+	"ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+	"uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+	"rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+	"sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+	"miphy_dbg_grp", "pcie_grp", "sata_grp"
+
+Valid values for function names are:
+For All SPEAr3xx machines:
+	"firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
+	"uart0", "timer_0_1", "timer_2_3"
+
+For SPEAr300 machines:
+	"fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1"
+
+For SPEAr310 machines:
+	"emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0",
+	"rs485_1", "tdm"
+
+For SPEAr320 machines:
+	"clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem",
+	"uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
+	"can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
+	"mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+	"i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+	"rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+	"gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+	"uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+	"i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+	"pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+	"pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+	"uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+	"xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
new file mode 100644
index 0000000000..ca9d246d46
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinmux-node.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Pin Multiplexing Node
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The contents of the pin configuration child nodes are defined by the binding
+  for the individual pin controller device. The pin configuration nodes need not
+  be direct children of the pin controller device; they may be grandchildren,
+  for example. Whether this is legal, and whether there is any interaction
+  between the child and intermediate parent nodes, is again defined entirely by
+  the binding for the individual pin controller device.
+
+  While not required to be used, there are 3 generic forms of pin muxing nodes
+  which pin controller devices can use.
+
+  pin multiplexing nodes:
+
+  Example:
+
+  state_0_node_a {
+    uart0 {
+      function = "uart0";
+      groups = "u0rxtx", "u0rtscts";
+    };
+  };
+  state_1_node_a {
+    spi {
+      function = "spi0";
+      groups = "spi0pins";
+    };
+  };
+  state_2_node_a {
+    function = "i2c0";
+    pins = "mfio29", "mfio30";
+  };
+
+  Optionally an alternative binding can be used if more suitable depending on the
+  pin controller hardware. For hardware where there is a large number of identical
+  pin controller instances, naming each pin and function can easily become
+  unmaintainable. This is especially the case if the same controller is used for
+  different pins and functions depending on the SoC revision and packaging.
+
+  For cases like this, the pin controller driver may use pinctrl-pin-array helper
+  binding with a hardware based index and a number of pin configuration values:
+
+  pincontroller {
+    ... /* Standard DT properties for the device itself elided */
+    #pinctrl-cells = <2>;
+
+    state_0_node_a {
+      pinctrl-pin-array = <
+        0 A_DELAY_PS(0) G_DELAY_PS(120)
+        4 A_DELAY_PS(0) G_DELAY_PS(360)
+        ...
+        >;
+    };
+    ...
+  };
+
+  Above #pinctrl-cells specifies the number of value cells in addition to the
+  index of the registers. This is similar to the interrupts-extended binding with
+  one exception. There is no need to specify the phandle for each entry as that
+  is already known as the defined pins are always children of the pin controller
+  node. Further having the phandle pointing to another pin controller would not
+  currently work as the pinctrl framework uses named modes to group pins for each
+  pin control device.
+
+  The index for pinctrl-pin-array must relate to the hardware for the pinctrl
+  registers, and must not be a virtual index of pin instances. The reason for
+  this is to avoid mapping of the index in the dts files and the pin controller
+  driver as it can change.
+
+  For hardware where pin multiplexing configurations have to be specified for
+  each single pin the number of required sub-nodes containing "pin" and
+  "function" properties can quickly escalate and become hard to write and
+  maintain.
+
+  For cases like this, the pin controller driver may use the pinmux helper
+  property, where the pin identifier is provided with mux configuration settings
+  in a pinmux group. A pinmux group consists of the pin identifier and mux
+  settings represented as a single integer or an array of integers.
+
+  The pinmux property accepts an array of pinmux groups, each of them describing
+  a single pin multiplexing configuration.
+
+  pincontroller {
+    state_0_node_a {
+      pinmux = <PINMUX_GROUP>, <PINMUX_GROUP>, ...;
+    };
+  };
+
+  Each individual pin controller driver bindings documentation shall specify
+  how pin IDs and pin multiplexing configuration are defined and assembled
+  together in a pinmux group.
+
+properties:
+  function:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The mux function to select
+
+  pins:
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      The list of pin identifiers that properties in the node apply to. The
+      specific binding for the hardware defines whether the entries are integers
+      or strings, and their meaning.
+
+  groups:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      the group to apply the properties to, if the driver supports
+      configuration of whole groups rather than individual pins (either
+      this, "pins" or "pinmux" has to be specified)
+
+  pinmux:
+    description:
+      The list of numeric pin ids and their mux settings that properties in the
+      node apply to (either this, "pins" or "groups" have to be specified)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  pinctrl-pin-array:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
new file mode 100644
index 0000000000..4e90ddd777
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -0,0 +1,95 @@
+Qualcomm APQ8064 TLMM block
+
+Required properties:
+- compatible: "qcom,apq8064-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+- gpio-ranges: see ../gpio/gpio.txt
+
+Optional properties:
+
+- gpio-reserved-ranges: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for pins are:
+  gpio0-gpio89
+
+Valid values for function are:
+  cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+  gp_clk_1b, gp_clk_2a, gp_clk_2b, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
+  gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
+  gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
+  gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
+  riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, ps_hold
+
+Example:
+
+	msmgpio: pinctrl@800000 {
+		compatible = "qcom,apq8064-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 16 0x4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsbi5_uart_default>;
+		gpio-ranges = <&msmgpio 0 0 90>;
+
+		gsbi5_uart_default: gsbi5_uart_default {
+			mux {
+				pins = "gpio51", "gpio52";
+				function = "gsbi5";
+			};
+
+			tx {
+				pins = "gpio51";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio52";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
new file mode 100644
index 0000000000..c9782397ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -0,0 +1,188 @@
+Qualcomm APQ8084 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,apq8084-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+- gpio-ranges:
+	Usage: required
+	Definition:  see ../gpio/gpio.txt
+
+- gpio-reserved-ranges:
+	Usage: optional
+	Definition: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio0-gpio146,
+		    sdc1_clk,
+		    sdc1_cmd,
+		    sdc1_data
+		    sdc2_clk,
+		    sdc2_cmd,
+		    sdc2_data
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+		    adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+		    blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+		    blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+		    blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
+		    blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+		    blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
+		    blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
+		    blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+		    blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+		    blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+		    blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
+		    cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+		    cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+		    edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
+		    gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
+		    hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
+		    ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
+		    pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+		    qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+		    sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+		    spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
+		    tsif2, uim, uim_batt_alarm
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@fd510000 {
+		compatible = "qcom,apq8084-pinctrl";
+		reg = <0xfd510000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&tlmm 0 0 147>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 208 0>;
+
+		uart2: uart2-default {
+			mux {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+			};
+
+			tx {
+				pins = "gpio4";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
new file mode 100644
index 0000000000..97858a7c07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -0,0 +1,85 @@
+Qualcomm Atheros IPQ4019 TLMM block
+
+This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
+platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
+
+Required properties:
+- compatible: "qcom,ipq4019-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+- gpio-ranges: see ../gpio/gpio.txt
+
+Optional properties:
+
+- gpio-reserved-ranges: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+ drive-strength.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+
+Valid values for qcom,pins are:
+  gpio0-gpio99
+    Supports mux, bias and drive-strength
+
+Valid values for qcom,function are:
+aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0,
+blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
+jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11,
+mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
+smart2, smart3, tm, wifi0, wifi1
+
+Example:
+
+	tlmm: pinctrl@1000000 {
+		compatible = "qcom,ipq4019-pinctrl";
+		reg = <0x1000000 0x300000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&tlmm 0 0 100>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 208 0>;
+
+		serial_pins: serial_pinmux {
+			mux {
+				pins = "gpio60", "gpio61";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
new file mode 100644
index 0000000000..fad0118fd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq5018-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 24
+
+  gpio-line-names:
+    maxItems: 47
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq5018-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
+                audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
+                audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
+                blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+                blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+                blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
+                cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
+                gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
+                pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
+                prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
+                qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
+                wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq5018-tlmm";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 47>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio33";
+                function = "blsp1_uart1";
+                bias-pull-down;
+            };
+
+            tx-pins {
+                pins = "gpio34";
+                function = "blsp1_uart1";
+                bias-pull-down;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
new file mode 100644
index 0000000000..3d3086ae1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5332 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq5332-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 27
+
+  gpio-line-names:
+    maxItems: 53
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq5332-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-4][0-9]|5[0-2])$"
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec,
+                audio_sec0, audio_sec1, blsp0_i2c, blsp0_spi, blsp0_uart0,
+                blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+                blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+                blsp2_spi, blsp2_spi0, blsp2_spi1, core_voltage, cri_trng0,
+                cri_trng1, cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out,
+                gcc_plltest, gcc_tlmm, gpio, lock_det, mac0, mac1, mdc0, mdc1,
+                mdio0, mdio1, pc, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake,
+                pcie2_clk, pcie2_wake, pll_test, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, pta, pwm0, pwm1, pwm2, pwm3,
+                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
+                rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd,
+                wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq5332-tlmm";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&tlmm 0 0 53>;
+        interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <0x2>;
+
+        serial0-state {
+            pins = "gpio18", "gpio19";
+            function = "blsp0_uart0";
+            drive-strength = <8>;
+            bias-pull-up;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
new file mode 100644
index 0000000000..7c3e5e043f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ6018 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ6018 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq6018-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq6018-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq6018-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq6018-tlmm-state:
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+                atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
+                atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c,
+                blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi,
+                blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
+                blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
+                blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
+                blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+                cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+                cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
+                dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
+                flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
+                gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
+                ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
+                pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+                qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+                qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, qpic_pad, reset_n, sd_card,
+                sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
+                uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq6018-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 80>;
+
+        serial3-state {
+            pins = "gpio44", "gpio45";
+            function = "blsp2_uart";
+            drive-strength = <8>;
+            bias-pull-down;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
new file mode 100644
index 0000000000..a7aaaa7db8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -0,0 +1,101 @@
+Qualcomm IPQ8064 TLMM block
+
+Required properties:
+- compatible: "qcom,ipq8064-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+- gpio-ranges: see ../gpio/gpio.txt
+
+Optional properties:
+
+- gpio-reserved-ranges: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for qcom,pins are:
+  gpio0-gpio68
+   Supports mux, bias, and drive-strength
+
+  sdc3_clk, sdc3_cmd, sdc3_data
+   Supports bias and drive-strength
+
+
+Valid values for function are:
+  mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
+  gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
+  spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
+  pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
+  pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
+  pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
+  pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold
+
+Example:
+
+	pinmux: pinctrl@800000 {
+		compatible = "qcom,ipq8064-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinmux 0 0 69>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 32 0x4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsbi5_uart_default>;
+
+		gsbi5_uart_default: gsbi5_uart_default {
+			mux {
+				pins = "gpio18", "gpio19";
+				function = "gsbi5";
+			};
+
+			tx {
+				pins = "gpio18";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio19";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
new file mode 100644
index 0000000000..e053fbd588
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ8074 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq8074-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 35
+
+  gpio-line-names:
+    maxItems: 70
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq8074-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq8074-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq8074-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-6][0-9]|70)$"
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
+                audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
+                audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
+                blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
+                blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
+                blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
+                blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
+                blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0,
+                cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0,
+                led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2,
+                mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst,
+                pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx,
+                pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0,
+                pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
+                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
+                tsens_max, wci2a, wci2b, wci2c, wci2d ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq8074-pinctrl";
+        reg = <0x01000000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&tlmm 0 0 70>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <0x2>;
+
+        serial4-state {
+            pins = "gpio23", "gpio24";
+            function = "blsp4_uart1";
+            drive-strength = <8>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
new file mode 100644
index 0000000000..e5e9962b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
+
+properties:
+  compatible:
+    const: qcom,ipq9574-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 33
+
+  gpio-line-names:
+    maxItems: 65
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-ipq9574-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
+                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
+                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
+                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
+                cri_trng1, cri_trng2, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
+                gcc_plltest, gcc_tlmm, gpio, mac, mdc, mdio, pcie0_clk, pcie0_wake,
+                pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake, pcie3_clk, pcie3_wake,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pta, pwm,
+                qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
+                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
+                wci20, wci21, wsa_swrm ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,ipq9574-tlmm";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 65>;
+
+        uart2-state {
+            pins = "gpio34", "gpio35";
+            function = "blsp2_uart";
+            drive-strength = <8>;
+            bias-pull-down;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
new file mode 100644
index 0000000000..2aedb7e7bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MDM9607 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,mdm9607-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-mdm9607-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-mdm9607-tlmm-state"
+
+$defs:
+  qcom-mdm9607-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3,
+                atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native,
+                atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b,
+                bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+                blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4,
+                blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3,
+                blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2,
+                codec_int, codec_rst, coex_uart, cri_trng, cri_trng0,
+                cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b,
+                ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst,
+                gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b,
+                gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio,
+                gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync,
+                nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a,
+                nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2,
+                pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a,
+                pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a,
+                ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+                qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1,
+                rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2,
+                sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+                uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,mdm9607-tlmm";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&msmgpio 0 0 80>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
new file mode 100644
index 0000000000..5885aee95c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MDM9615 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC.
+
+$ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,mdm9615-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  '#gpio-cells': true
+  gpio-ranges: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
+        additionalProperties: false
+
+$defs:
+  qcom-mdm9615-pinctrl-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$"
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
+                sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+      compatible = "qcom,mdm9615-pinctrl";
+      reg = <0x01000000 0x300000>;
+      interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      gpio-ranges = <&msmgpio 0 0 88>;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      gsbi3-state {
+        pins = "gpio8", "gpio9", "gpio10", "gpio11";
+        function = "gsbi3";
+        drive-strength = <8>;
+        bias-disable;
+      };
+
+      gsbi5-i2c-state {
+        sda-pins {
+          pins = "gpio16";
+          function = "gsbi5_i2c";
+          drive-strength = <8>;
+          bias-disable;
+        };
+
+        scl-pins {
+          pins = "gpio17";
+          function = "gsbi5_i2c";
+          drive-strength = <2>;
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 0000000000..9efb765095
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8226-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8226-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8226-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8226-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-6])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
+                blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1,
+                gp0_clk, gp1_clk, sdc3, wlan ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    msmgpio: pinctrl@fd510000 {
+        compatible = "qcom,msm8226-pinctrl";
+        reg = <0xfd510000 0x4000>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&msmgpio 0 0 117>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        serial-state {
+            pins = "gpio8", "gpio9";
+            function = "blsp_uart3";
+            drive-strength = <8>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
new file mode 100644
index 0000000000..a059716117
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8660 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8660-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 86
+
+  gpio-line-names:
+    maxItems: 173
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8660-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8660-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8660-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$"
+            - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+                gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n,
+                gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2,
+                gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3,
+                gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4,
+                gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12,
+                hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2,
+                sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2,
+                usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@800000 {
+        compatible = "qcom,msm8660-pinctrl";
+        reg = <0x800000 0x4000>;
+
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 173>;
+        #gpio-cells = <2>;
+        interrupts = <0 16 0x4>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gsbi3-i2c-state {
+            pins = "gpio43", "gpio44";
+            function = "gsbi3";
+            drive-strength = <8>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
new file mode 100644
index 0000000000..5095e86fe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8909 TLMM block
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8909-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8909-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8909-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8909-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1,
+                      qdsd_data2, qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1,
+                bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1,
+                blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1,
+                blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1,
+                blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+                blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk,
+                cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0,
+                dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd,
+                ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio,
+                gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2,
+                pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a,
+                pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+                pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b,
+                prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a,
+                qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s,
+                smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
+                wcss_bt, wcss_fm, wcss_wlan ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@1000000 {
+        compatible = "qcom,msm8909-tlmm";
+        reg = <0x1000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 113>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
new file mode 100644
index 0000000000..063d004967
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8916-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 61
+
+  gpio-line-names:
+    maxItems: 122
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8916-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8916-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8916-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$"
+            - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+                atest_char0, atest_char1, atest_char2, atest_char3,
+                atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens,
+                atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+                blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
+                blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2,
+                blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+                blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1,
+                blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby,
+                cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+                cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
+                display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc,
+                euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b,
+                gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b,
+                gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0,
+                kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync,
+                modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0,
+                pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
+                pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+                qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+                qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+                qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+                qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n,
+                sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1,
+                uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan,
+                webcam1_rst ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    msmgpio: pinctrl@1000000 {
+        compatible = "qcom,msm8916-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&msmgpio 0 0 122>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart2-sleep-state {
+            pins = "gpio4", "gpio5";
+            function = "gpio";
+
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+
+        spi1-default-state {
+            spi-pins {
+                pins = "gpio0", "gpio1", "gpio3";
+                function = "blsp_spi1";
+
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            cs-pins {
+                pins = "gpio2";
+                function = "gpio";
+
+                drive-strength = <16>;
+                bias-disable;
+                output-high;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
new file mode 100644
index 0000000000..798aac9e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8953-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8953 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8953-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8953-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8953-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8953-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[01])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0,
+                      qdsd_data1, qdsd_data2, qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1,
+                atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+                atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, atest_tsens,
+                atest_wlan0, atest_wlan1, bimc_dte0, bimc_dte1, blsp1_spi,
+                blsp3_spi, blsp6_spi, blsp7_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1,
+                blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+                blsp_spi8, blsp_uart2, blsp_uart4, blsp_uart5, blsp_uart6, cam0_ldo,
+                cam1_ldo, cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam3_rst,
+                cam3_standby, cam_irq, cam_mclk, cap_int, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cdc_pdm0, codec_int1, codec_int2, codec_reset, cri_trng, cri_trng0,
+                cri_trng1, dac_calib0, dac_calib1, dac_calib10, dac_calib11,
+                dac_calib12, dac_calib13, dac_calib14, dac_calib15, dac_calib16,
+                dac_calib17, dac_calib18, dac_calib19, dac_calib2, dac_calib20,
+                dac_calib21, dac_calib22, dac_calib23, dac_calib24, dac_calib25,
+                dac_calib3, dac_calib4, dac_calib5, dac_calib6, dac_calib7,
+                dac_calib8, dac_calib9, dbg_out, ddr_bist, dmic0_clk, dmic0_data,
+                ebi_cdc, ebi_ch0, ext_lpass, flash_strobe, fp_int, gcc_gp1_clk_a,
+                gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+                gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, gsm0_tx, gsm1_tx,
+                gyro_int, hall_int, hdmi_int, key_focus, key_home, key_snapshot,
+                key_volp, ldo_en, ldo_update, lpass_slimbus, lpass_slimbus0,
+                lpass_slimbus1, m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync,
+                mss_lte, nav_pps, nav_pps_in_a, nav_pps_in_b, nav_tsync,
+                nfc_disable, nfc_dwl, nfc_irq, ois_sync, pa_indicator, pbs0, pbs1,
+                pbs2, pressure_int, pri_mi2s, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+                pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_down, pwr_modem_enabled_a, pwr_modem_enabled_b,
+                pwr_nav_enabled_a, pwr_nav_enabled_b, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+                qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+                qdss_tracedata_b, sd_write, sdcard_det, sec_mi2s, sec_mi2s_mclk_a,
+                sec_mi2s_mclk_b, smb_int, ss_switch, ssbi_wtr1, ts_resout,
+                ts_sample, ts_xvdd, tsens_max, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
+                wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,msm8953-pinctrl";
+        reg = <0x01000000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 142>;
+
+        serial_default: serial-state {
+            pins = "gpio4", "gpio5";
+            function = "blsp_uart2";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
new file mode 100644
index 0000000000..9172b50f7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8960 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8960-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 76
+
+  gpio-line-names:
+    maxItems: 152
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8960-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8960-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8960-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd,
+                      sdc3_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+                codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+                gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+                gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b,
+                gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1,
+                gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+                gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+                gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+                gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+                gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11,
+                gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n,
+                gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec,
+                hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic,
+                mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold,
+                rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s,
+                ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts,
+                tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n,
+                usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a,
+                vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a,
+                vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b,
+                vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b,
+                vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c,
+                vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c,
+                wlan ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    msmgpio: pinctrl@800000 {
+        compatible = "qcom,msm8960-pinctrl";
+        reg = <0x800000 0x4000>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&msmgpio 0 0 152>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        spi1-default-state {
+            mosi-pins {
+                pins = "gpio6";
+                function = "gsbi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            miso-pins {
+                pins = "gpio7";
+                function = "gsbi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            cs-pins {
+                pins = "gpio8";
+                function = "gpio";
+                drive-strength = <12>;
+                bias-disable;
+                output-low;
+            };
+
+            clk-pins {
+                pins = "gpio9";
+                function = "gsbi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
new file mode 100644
index 0000000000..8a3be65c51
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8974 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8974-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 73
+
+  gpio-line-names:
+    maxItems: 146
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8974-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8974-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8974-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
+            - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm,
+                blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2,
+                blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3,
+                blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4,
+                blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5,
+                blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7,
+                blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8,
+                blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9,
+                blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10,
+                blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12,
+                blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1,
+                blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2
+                blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+                sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0,
+                cci_timer1, cci_timer2, cci_timer3, cci_async_in0,
+                cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2,
+                cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd,
+                gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn,
+                tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
+                spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]
+
+    required:
+      - pins
+
+    allOf:
+      - if:
+          properties:
+            pins:
+              contains:
+                enum:
+                  - hsic_data
+                  - hsic_strobe
+          required:
+            - pins
+        then:
+          properties:
+            bias-pull-down: false
+            bias-pull-up: false
+            bias-disable: false
+            drive-strength: false
+            input-enable: false
+            output-high: false
+            output-low: false
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@fd510000 {
+        compatible = "qcom,msm8974-pinctrl";
+        reg = <0xfd510000 0x4000>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 146>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        sdc1-off-state {
+            clk-pins {
+                pins = "sdc1_clk";
+                bias-disable;
+                drive-strength = <2>;
+            };
+
+            cmd-pins {
+                pins = "sdc1_cmd";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
+
+            data-pins {
+                pins = "sdc1_data";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
+        };
+
+        blsp2-uart1-sleep-state {
+            pins = "gpio41", "gpio42", "gpio43", "gpio44";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+
+        hsic-state {
+            pins = "hsic_data", "hsic_strobe";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
new file mode 100644
index 0000000000..ca95de0b87
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8976 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8976-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 73
+
+  gpio-line-names:
+    maxItems: 145
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8976-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8976-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8976-tlmm-state:
+    type: object
+    description:
+      Desired pin configuration for a device or its specific state (like sleep
+      or active).
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this state.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$"
+            - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+                      qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2,
+                blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3,
+                qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b,
+                blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5,
+                qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a,
+                qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b,
+                blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a,
+                sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi,
+                blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a,
+                uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset,
+                uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present,
+                ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample,
+                sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter,
+                pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus,
+                lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2,
+                wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan,
+                wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down,
+                dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8,
+                wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1,
+                gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,msm8976-pinctrl";
+        reg = <0x1000000 0x300000>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 145>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart2-active-state {
+            pins = "gpio4", "gpio5", "gpio6", "gpio7";
+            function = "blsp_uart2";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
new file mode 100644
index 0000000000..41525ecfa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8994 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8992-pinctrl
+      - qcom,msm8994-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 73
+
+  gpio-line-names:
+    maxItems: 146
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8994-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8994-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8994-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+                blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1,
+                blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
+                blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
+                blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8,
+                blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2,
+                blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+                blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
+                blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+                blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+                blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+                blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b,
+                blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1,
+                cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1,
+                cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a,
+                gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+                gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
+                gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd,
+                hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync,
+                qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c,
+                qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b,
+                qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1,
+                pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
+                tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@fd510000 {
+        compatible = "qcom,msm8994-pinctrl";
+        reg = <0xfd510000 0x4000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 146>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart2-default-state {
+            function = "blsp_uart2";
+            pins = "gpio4", "gpio5";
+            drive-strength = <16>;
+            bias-disable;
+        };
+
+        blsp1-spi1-default-state {
+            default-pins {
+                pins = "gpio0", "gpio1", "gpio3";
+                function = "blsp_spi1";
+                drive-strength = <10>;
+                bias-pull-down;
+            };
+
+            cs-pins {
+                pins = "gpio8";
+                function = "gpio";
+                drive-strength = <2>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
new file mode 100644
index 0000000000..59d406b609
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8996-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8996-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8996-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8996-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8996-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
+                atest_char, cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
+                qdss_tracedata_b, pll_reset, qdss_stm6, qdss_stm5, qdss_stm4,
+                atest_usb2, cci_i2c, qdss_stm3, dac_calib3, atest_usb23,
+                atest_char3, dac_calib4, qdss_stm2, atest_usb22, atest_char2,
+                qdss_stm1, dac_calib5, atest_usb21, atest_char1, dbg_out,
+                qdss_stm0, dac_calib6, atest_usb20, atest_char0, dac_calib10,
+                qdss_stm10, qdss_cti_trig_in_a, cci_timer4, blsp_spi6,
+                blsp_uart6, blsp_uim6, blsp2_spi, qdss_stm9,
+                qdss_cti_trig_out_a, dac_calib11, qdss_stm8, cci_timer0,
+                qdss_stm13, dac_calib7, cci_timer1, qdss_stm12, dac_calib8,
+                cci_timer2, blsp1_spi, qdss_stm11, dac_calib9, cci_timer3,
+                cci_async, dac_calib12, blsp_i2c6, qdss_tracectl_a,
+                dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15,
+                hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17,
+                hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, dac_calib19,
+                hdmi_hot, dac_calib20, dac_calib21, pci_e0, dac_calib22,
+                dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write,
+                tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti,
+                blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, uim3,
+                blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
+                blsp_uart11, blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a,
+                blsp_i2c11, cri_trng0, cri_trng1, cri_trng, qdss_stm18,
+                pri_mi2s, qdss_stm17, blsp_spi4, blsp_uart4, blsp_uim4,
+                qdss_stm16, qdss_stm15, blsp_i2c4, qdss_stm14, dac_calib26,
+                spkr_i2s, audio_ref, lpass_slimbus, isense_dbg, tsense_pwm1,
+                tsense_pwm2, btfm_slimbus, ter_mi2s, qdss_stm22, qdss_stm21,
+                qdss_stm20, qdss_stm19, gcc_gp1_clk_b, sec_mi2s, blsp_spi5,
+                blsp_uart5, blsp_uim5, gcc_gp2_clk_b, gcc_gp3_clk_b, blsp_i2c5,
+                blsp_spi12, blsp_uart12, blsp_uim12, qdss_stm25, qdss_stm31,
+                blsp_i2c12, qdss_stm30, qdss_stm29, tsif1_clk, qdss_stm28,
+                tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, qdss_traceclk_b,
+                tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, sdc4_clk,
+                qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
+                blsp11_uart_rx_b, blsp11_i2c_sda_b, prng_rosc,
+                blsp11_i2c_scl_b, uim2, uim1, uim_batt, pci_e2, pa_indicator,
+                adsp_ext, ddr_bist, qdss_tracedata_11, qdss_tracedata_12,
+                modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2,
+                ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1010000 {
+        compatible = "qcom,msm8996-pinctrl";
+        reg = <0x01010000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 150>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-spi1-default-state {
+            spi-pins {
+                pins = "gpio0", "gpio1", "gpio3";
+                function = "blsp_spi1";
+                drive-strength = <12>;
+                bias-disable;
+            };
+
+            cs-pins {
+                pins = "gpio2";
+                function = "gpio";
+                drive-strength = <16>;
+                bias-disable;
+                output-high;
+            };
+        };
+
+        blsp1-spi1-sleep-state {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
new file mode 100644
index 0000000000..bd6d7caf49
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC.
+
+properties:
+  compatible:
+    const: qcom,msm8998-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8998-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-msm8998-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-msm8998-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
+                atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1,
+                atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref,
+                bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b,
+                blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi,
+                blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+                blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9,
+                blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2,
+                blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+                blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12,
+                blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b,
+                blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b,
+                blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a,
+                blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a,
+                blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a,
+                blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a,
+                blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+                edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b,
+                gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv,
+                isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus,
+                m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte,
+                nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag,
+                pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc,
+                pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b,
+                qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request,
+                qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43,
+                sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq,
+                ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0,
+                tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+                uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
+                vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3400000 {
+        compatible = "qcom,msm8998-pinctrl";
+        reg = <0x03400000 0xc00000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 150>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-reserved-ranges = <0 4>, <81 4>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+        };
+
+        sdc2-cd-state {
+            pins = "gpio95";
+            function = "gpio";
+            bias-pull-up;
+            drive-strength = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
new file mode 100644
index 0000000000..3f8ad07c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -0,0 +1,572 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC GPIO block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the GPIO block(s) found in the 8xxx series of
+  PMIC's from Qualcomm.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm2250-gpio
+          - qcom,pm660-gpio
+          - qcom,pm660l-gpio
+          - qcom,pm6125-gpio
+          - qcom,pm6150-gpio
+          - qcom,pm6150l-gpio
+          - qcom,pm6350-gpio
+          - qcom,pm7250b-gpio
+          - qcom,pm7325-gpio
+          - qcom,pm7550ba-gpio
+          - qcom,pm8005-gpio
+          - qcom,pm8008-gpio
+          - qcom,pm8018-gpio
+          - qcom,pm8019-gpio
+          - qcom,pm8038-gpio
+          - qcom,pm8058-gpio
+          - qcom,pm8150-gpio
+          - qcom,pm8150b-gpio
+          - qcom,pm8150l-gpio
+          - qcom,pm8226-gpio
+          - qcom,pm8350-gpio
+          - qcom,pm8350b-gpio
+          - qcom,pm8350c-gpio
+          - qcom,pm8450-gpio
+          - qcom,pm8550-gpio
+          - qcom,pm8550b-gpio
+          - qcom,pm8550ve-gpio
+          - qcom,pm8550vs-gpio
+          - qcom,pm8916-gpio
+          - qcom,pm8917-gpio
+          - qcom,pm8921-gpio
+          - qcom,pm8941-gpio
+          - qcom,pm8950-gpio
+          - qcom,pm8953-gpio
+          - qcom,pm8994-gpio
+          - qcom,pm8998-gpio
+          - qcom,pma8084-gpio
+          - qcom,pmc8180-gpio
+          - qcom,pmc8180c-gpio
+          - qcom,pmi632-gpio
+          - qcom,pmi8950-gpio
+          - qcom,pmi8994-gpio
+          - qcom,pmi8998-gpio
+          - qcom,pmk8350-gpio
+          - qcom,pmk8550-gpio
+          - qcom,pmm8155au-gpio
+          - qcom,pmm8654au-gpio
+          - qcom,pmp8074-gpio
+          - qcom,pmr735a-gpio
+          - qcom,pmr735b-gpio
+          - qcom,pmr735d-gpio
+          - qcom,pms405-gpio
+          - qcom,pmx55-gpio
+          - qcom,pmx65-gpio
+          - qcom,pmx75-gpio
+
+      - enum:
+          - qcom,spmi-gpio
+          - qcom,ssbi-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names:
+    minItems: 2
+    maxItems: 44
+
+  gpio-reserved-ranges:
+    minItems: 1
+    # maxItems as half of total number of GPIOs, as there has to be at
+    # least one usable GPIO between each reserved range.
+    maxItems: 22
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell will be used to define gpio number and the
+      second denotes the flags for this gpio
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8008-gpio
+              - qcom,pmi8950-gpio
+              - qcom,pmr735d-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 2
+          maxItems: 2
+        gpio-reserved-ranges:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8005-gpio
+              - qcom,pm8450-gpio
+              - qcom,pm8916-gpio
+              - qcom,pmk8350-gpio
+              - qcom,pmr735a-gpio
+              - qcom,pmr735b-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 4
+          maxItems: 4
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8018-gpio
+              - qcom,pm8019-gpio
+              - qcom,pm8550vs-gpio
+              - qcom,pmk8550-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 6
+          maxItems: 6
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm7550ba-gpio
+              - qcom,pm8226-gpio
+              - qcom,pm8350b-gpio
+              - qcom,pm8550ve-gpio
+              - qcom,pm8950-gpio
+              - qcom,pm8953-gpio
+              - qcom,pmi632-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 8
+          maxItems: 8
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6350-gpio
+              - qcom,pm8350c-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 9
+          maxItems: 9
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm2250-gpio
+              - qcom,pm6150-gpio
+              - qcom,pm7325-gpio
+              - qcom,pm8150-gpio
+              - qcom,pm8350-gpio
+              - qcom,pmc8180-gpio
+              - qcom,pmi8994-gpio
+              - qcom,pmm8155au-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 10
+          maxItems: 10
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmx55-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 11
+          maxItems: 11
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-gpio
+              - qcom,pm6150l-gpio
+              - qcom,pm7250b-gpio
+              - qcom,pm8038-gpio
+              - qcom,pm8150b-gpio
+              - qcom,pm8150l-gpio
+              - qcom,pm8550-gpio
+              - qcom,pm8550b-gpio
+              - qcom,pmc8180c-gpio
+              - qcom,pmp8074-gpio
+              - qcom,pms405-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 12
+          maxItems: 12
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 13
+          maxItems: 13
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi8998-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 14
+          maxItems: 14
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmx65-gpio
+              - qcom,pmx75-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 16
+          maxItems: 16
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8994-gpio
+              - qcom,pma8084-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 22
+          maxItems: 22
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 11
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 26
+          maxItems: 26
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 13
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 36
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 18
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8917-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 38
+          maxItems: 38
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 19
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8058-gpio
+              - qcom,pm8921-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 44
+          maxItems: 44
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 22
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-pmic-gpio-state"
+      - patternProperties:
+          "(pinconf|-pins)$":
+            $ref: "#/$defs/qcom-pmic-gpio-state"
+        additionalProperties: false
+
+$defs:
+  qcom-pmic-gpio-state:
+    type: object
+    allOf:
+      - $ref: pinmux-node.yaml
+      - $ref: pincfg-node.yaml
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.  Valid pins are
+                 - gpio1-gpio9 for pm6125
+                 - gpio1-gpio10 for pm6150
+                 - gpio1-gpio12 for pm6150l
+                 - gpio1-gpio9 for pm6350
+                 - gpio1-gpio12 for pm7250b
+                 - gpio1-gpio10 for pm7325
+                 - gpio1-gpio8 for pm7550ba
+                 - gpio1-gpio4 for pm8005
+                 - gpio1-gpio2 for pm8008
+                 - gpio1-gpio6 for pm8018
+                 - gpio1-gpio12 for pm8038
+                 - gpio1-gpio40 for pm8058
+                 - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5,
+                                            gpio7 and gpio8)
+                 - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4
+                                             and gpio7)
+                 - gpio1-gpio12 for pm8150l (hole on gpio7)
+                 - gpio1-gpio4 for pm8916
+                 - gpio1-gpio10 for pm8350
+                 - gpio1-gpio8 for pm8350b
+                 - gpio1-gpio9 for pm8350c
+                 - gpio1-gpio4 for pm8450
+                 - gpio1-gpio12 for pm8550
+                 - gpio1-gpio12 for pm8550b
+                 - gpio1-gpio8 for pm8550ve
+                 - gpio1-gpio6 for pm8550vs
+                 - gpio1-gpio38 for pm8917
+                 - gpio1-gpio44 for pm8921
+                 - gpio1-gpio36 for pm8941
+                 - gpio1-gpio8 for pm8950 (hole on gpio3)
+                 - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)
+                 - gpio1-gpio22 for pm8994
+                 - gpio1-gpio26 for pm8998
+                 - gpio1-gpio22 for pma8084
+                 - gpio1-gpio8 for pmi632
+                 - gpio1-gpio2 for pmi8950
+                 - gpio1-gpio10 for pmi8994
+                 - gpio1-gpio4 for pmk8350
+                 - gpio1-gpio6 for pmk8550
+                 - gpio1-gpio10 for pmm8155au
+                 - gpio1-gpio12 for pmm8654au
+                 - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12)
+                 - gpio1-gpio4 for pmr735a
+                 - gpio1-gpio4 for pmr735b
+                 - gpio1-gpio2 for pmr735d
+                 - gpio1-gpio12 for pms405 (holes on gpio1, gpio9
+                                            and gpio10)
+                 - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
+                                            and gpio11)
+                 - gpio1-gpio16 for pmx65
+                 - gpio1-gpio16 for pmx75
+
+        items:
+          pattern: "^gpio([0-9]+)$"
+
+      function:
+        items:
+          - enum:
+              - normal
+              - paired
+              - func1
+              - func2
+              - dtest1
+              - dtest2
+              - dtest3
+              - dtest4
+              - func3  # supported by LV/MV GPIO subtypes
+              - func4  # supported by LV/MV GPIO subtypes
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+
+      qcom,pull-up-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the strength to use for pull up, if selected.
+          Valid values are defined in
+          <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+          If this property is omitted 30uA strength will be used
+          if pull up is selected
+        enum: [0, 1, 2, 3]
+
+      bias-high-impedance: true
+      input-enable: true
+      input-disable: true
+      output-high: true
+      output-low: true
+      output-enable: true
+      output-disable: true
+      power-source: true
+
+      qcom,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects the drive strength for the specified pins
+          Valid drive strength values are defined in
+          <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+        enum: [0, 1, 2, 3]
+
+      drive-push-pull: true
+      drive-open-drain: true
+      drive-open-source: true
+
+      qcom,analog-pass:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The specified pins are configured in
+          analog-pass-through mode.
+
+      qcom,atest:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects ATEST rail to route to GPIO when it's
+          configured in analog-pass-through mode.
+        enum: [1, 2, 3, 4]
+
+      qcom,dtest-buffer:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects DTEST rail to route to GPIO when it's
+          configured as digital input.
+        enum: [1, 2, 3, 4]
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+    pm8921_gpio: gpio@150 {
+      compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
+      reg = <0x150 0x160>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pm8921_gpio 0 0 44>;
+      #gpio-cells = <2>;
+
+      pm8921_gpio_keys: gpio-keys-state {
+        volume-keys-pins {
+          pins = "gpio20", "gpio21";
+          function = "normal";
+
+          input-enable;
+          bias-pull-up;
+          drive-push-pull;
+          qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+          power-source = <PM8921_GPIO_S4>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
new file mode 100644
index 0000000000..80f9606718
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC Multi-Purpose Pin (MPP) block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the MPP block(s) found in the 8xxx series of
+  PMIC's from Qualcomm.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pm8019-mpp
+              - qcom,pm8226-mpp
+              - qcom,pm8841-mpp
+              - qcom,pm8916-mpp
+              - qcom,pm8941-mpp
+              - qcom,pm8950-mpp
+              - qcom,pmi8950-mpp
+              - qcom,pm8994-mpp
+              - qcom,pma8084-mpp
+              - qcom,pmi8994-mpp
+          - const: qcom,spmi-mpp
+      - items:
+          - enum:
+              - qcom,pm8018-mpp
+              - qcom,pm8038-mpp
+              - qcom,pm8058-mpp
+              - qcom,pm8821-mpp
+              - qcom,pm8917-mpp
+              - qcom,pm8921-mpp
+          - const: qcom,ssbi-mpp
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell will be used to define gpio number and the
+      second denotes the flags for this gpio
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-pmic-mpp-state"
+      - patternProperties:
+          '-pins$':
+            $ref: "#/$defs/qcom-pmic-mpp-state"
+        additionalProperties: false
+
+$defs:
+  qcom-pmic-mpp-state:
+    type: object
+    allOf:
+      - $ref: pinmux-node.yaml
+      - $ref: pincfg-node.yaml
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.  Valid pins are
+                 - mpp1-mpp4 for pm8841
+                 - mpp1-mpp4 for pm8916
+                 - mpp1-mpp8 for pm8941
+                 - mpp1-mpp4 for pm8950
+                 - mpp1-mpp4 for pmi8950
+                 - mpp1-mpp4 for pma8084
+
+        items:
+          pattern: "^mpp([0-9]+)$"
+
+      function:
+        items:
+          - enum:
+              - digital
+              - analog
+              - sink
+
+      bias-disable: true
+      bias-pull-up: true
+      bias-high-impedance: true
+      input-enable: true
+      output-high: true
+      output-low: true
+      power-source: true
+
+      qcom,analog-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects the source for analog output. Valued values are defined in
+          <dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_*
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      qcom,atest:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects ATEST rail to route to GPIO when it's
+          configured in analog-pass-through mode.
+        enum: [1, 2, 3, 4]
+
+      qcom,dtest:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects DTEST rail to route to GPIO when it's
+          configured as digital input.
+        enum: [1, 2, 3, 4]
+
+      qcom,amux-route:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Selects the source for analog input. Valid values are defined in
+          <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5,
+          PMIC_MPP_AMUX_ROUTE_CH6...
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      qcom,paired:
+        type: boolean
+        description:
+          Indicates that the pin should be operating in paired mode.
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+    pm8841_mpp: mpps@a000 {
+      compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+      reg = <0xa000 0>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pm8841_mpp 0 0 4>;
+      gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
+              "BT_LED_CTRL", "GPIO-F";
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&pm8841_default>;
+
+      mpp1-state {
+        pins = "mpp1";
+        function = "digital";
+        input-enable;
+        power-source = <PM8841_MPP_S3>;
+      };
+
+      default-state {
+        gpio-pins {
+          pins = "mpp1", "mpp2", "mpp3", "mpp4";
+          function = "digital";
+          input-enable;
+          power-source = <PM8841_MPP_S3>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
new file mode 100644
index 0000000000..c323f6d495
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCM2290 TLMM block
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qcm2290-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec,
+                cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2,
+                gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx,
+                jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1,
+                mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1,
+                pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11,
+                pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist,
+                pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3,
+                pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio,
+                qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write,
+                ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+                uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
+                vsense_trigger, wlan1_adc0, wlan1_adc1 ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,qcm2290-tlmm";
+        reg = <0x500000 0x300000>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 127>;
+
+        sdc2_on_state: sdc2-on-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                bias-disable;
+                drive-strength = <16>;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
new file mode 100644
index 0000000000..b1b9cd319e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC.
+
+properties:
+  compatible:
+    const: qcom,qcs404-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: south
+      - const: north
+      - const: east
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 60
+
+  gpio-line-names:
+    maxItems: 120
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qcs404-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qcs404-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qcs404-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0,
+                bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4,
+                blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2,
+                blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4,
+                blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1,
+                blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1,
+                blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1,
+                blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2,
+                blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a,
+                ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a,
+                ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest,
+                gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1,
+                hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6,
+                hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx,
+                i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a,
+                i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a,
+                i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a,
+                i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1,
+                mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist,
+                prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12,
+                pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17,
+                pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21,
+                pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5,
+                pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0,
+                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+                qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0,
+                rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5,
+                rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2,
+                rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6,
+                rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1,
+                rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc,
+                rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write,
+                spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, wsa_en ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@1000000 {
+        compatible = "qcom,qcs404-pinctrl";
+        reg = <0x01000000 0x200000>,
+              <0x01300000 0x200000>,
+              <0x07b00000 0x200000>;
+        reg-names = "south", "north", "east";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 120>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+
+        blsp1-i2c1-default-state {
+            pins = "gpio24", "gpio25";
+            function = "blsp_i2c1";
+        };
+
+        blsp1-i2c2-default-state {
+            sda-pins {
+                pins = "gpio19";
+                function = "blsp_i2c_sda_a2";
+            };
+
+            scl-pins {
+                pins = "gpio20";
+                function = "blsp_i2c_scl_a2";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
new file mode 100644
index 0000000000..237cac4f6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
+
+maintainers:
+  - Melody Olvera <quic_molvera@quicinc.com>
+
+description: |
+  Top Level Mode Multiplexer pin controller found in the QDU1000 and
+  QRU1000 SoCs.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qdu1000-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 76
+
+  gpio-line-names:
+    maxItems: 151
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-qdu1000-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|150)$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ atest_char, atest_usb, char_exec, CMO_PRI, cmu_rng,
+                dbg_out_clk, ddr_bist, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4,
+                ddr_pxi5, ddr_pxi6, ddr_pxi7, eth012_int_n, eth345_int_n,
+                gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_pps_in, hardsync_pps_in,
+                intr_c, jitter_bist_ref, pcie_clkreqn, phase_flag, pll_bist,
+                pll_clk, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+                qlink3_enable, qlink3_request, qlink3_wmss, qlink4_enable,
+                qlink4_request, qlink4_wmss, qlink5_enable, qlink5_request,
+                qlink5_wmss, qlink6_enable, qlink6_request, qlink6_wmss,
+                qlink7_enable, qlink7_request, qlink7_wmss, qspi_clk, qspi_cs,
+                qspi0, qspi1, qspi2, qspi3, qup00, qup01, qup02, qup03, qup04,
+                qup05, qup06, qup07, qup08, qup10, qup11, qup12, qup13, qup14,
+                qup15, qup16, qup17, qup20, qup21, qup22, SI5518_INT, smb_alert,
+                smb_clk, smb_dat, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tgu_ch4, tgu_ch5, tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tod_pps_in, tsense_pwm1, tsense_pwm2,
+                usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1,
+                vsense_trigger ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@f000000 {
+        compatible = "qcom,qdu1000-tlmm";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 151>;
+        wakeup-parent = <&pdc>;
+
+        uart0-default-state {
+            pins = "gpio6", "gpio7", "gpio8", "gpio9";
+            function = "qup00";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
new file mode 100644
index 0000000000..e119a226a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA8775P TLMM block
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sa8775p-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 74
+
+  gpio-line-names:
+    maxItems: 148
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sa8775p-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sa8775p-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sa8775p-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, ufs_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_usb2, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot,
+                edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot,
+                edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3,
+                emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0,
+                emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio,
+                emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
+                jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3,
+                mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8,
+                mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
+                mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
+                mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0,
+                mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1,
+                pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist, pll_clk,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+                qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
+                qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, qup2_se3,
+                qup2_se4, qup2_se5, qup2_se6, qup3_se0, sailss_emac0,
+                sailss_ospi, sail_top, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1,
+                tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2,
+                tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@f000000 {
+        compatible = "qcom,sa8775p-tlmm";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 148>;
+
+        qup-uart10-state {
+            pins = "gpio46", "gpio47";
+            function = "qup1_se3";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
new file mode 100644
index 0000000000..573e459b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC.
+
+properties:
+  compatible:
+    const: qcom,sc7180-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: north
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 60
+
+  gpio-line-names:
+    maxItems: 119
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc7180-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc7180-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc7180-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_tsens,
+                atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1,
+                gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
+                jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
+                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1,
+                mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST,
+                pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti,
+                qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data,
+                qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c,
+                qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12,
+                qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb,
+                sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1,
+                _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
+                wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3500000 {
+        compatible = "qcom,sc7180-pinctrl";
+        reg = <0x03500000 0x300000>,
+              <0x03900000 0x300000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "north", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 120>;
+        wakeup-parent = <&pdc>;
+
+        dp_hot_plug_det: dp-hot-plug-det-state {
+            pins = "gpio117";
+            function = "dp_hot";
+        };
+
+        qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+            spi-pins {
+                pins = "gpio53", "gpio54", "gpio55";
+                function = "qup15";
+            };
+
+            cs-pins {
+                pins = "gpio56";
+                function = "gpio";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..00c5a00e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 SoC LPASS LPI TLMM
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC.
+
+properties:
+  compatible:
+    const: qcom,sc7280-lpass-lpi-pinctrl
+
+  reg:
+    maxItems: 2
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc7280-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc7280-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc7280-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|1[0-4])$"
+        minItems: 1
+        maxItems: 15
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-bus-hold: true
+      bias-disable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    lpass_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+        dmic01-state {
+            dmic01-clk-pins {
+                pins = "gpio6";
+                function = "dmic1_clk";
+            };
+
+            dmic01-clk-sleep-pins {
+                pins = "gpio6";
+                function = "dmic1_clk";
+            };
+        };
+
+        tx-swr-data-sleep-state {
+            pins = "gpio1", "gpio2", "gpio14";
+            function = "swr_tx_data";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
new file mode 100644
index 0000000000..368d44ff54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC7280 TLMM block
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC.
+
+properties:
+  compatible:
+    const: qcom,sc7280-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names:
+    maxItems: 175
+
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc7280-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc7280-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc7280-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_usb0, atest_usb00, atest_usb01,
+                atest_usb02, atest_usb03, atest_usb1, atest_usb10,
+                atest_usb11, atest_usb12, atest_usb13, audio_ref,
+                cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, cmu_rng0, cmu_rng1,
+                cmu_rng2, cmu_rng3, coex_uart1, cri_trng, cri_trng0,
+                cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, dp_hot,
+                dp_lcd, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, host2wlan_sol, ibi_i3c, jitter_bist, lpass_slimbus,
+                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+                mdp_vsync4, mdp_vsync5, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mss_grfc0,
+                mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, mss_grfc2,
+                mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7,
+                mss_grfc8, mss_grfc9, nav_gpio0, nav_gpio1, nav_gpio2,
+                pa_indicator, pcie0_clkreqn, pcie1_clkreqn, phase_flag,
+                pll_bist, pll_bypassnl, pll_clk, pll_reset, pri_mi2s, prng_rosc,
+                qdss, qdss_cti, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qspi_clk, qspi_cs,
+                qspi_data, qup00, qup01, qup02, qup03, qup04, qup05, qup06, qup07,
+                qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sd_write,
+                sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tsense_pwm1,
+                tsense_pwm2, uim0_clk, uim0_data, uim0_present, uim0_reset,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
+                usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f000000 {
+        compatible = "qcom,sc7280-pinctrl";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 175>;
+        wakeup-parent = <&pdc>;
+
+        qup_uart5_default: qup-uart5-state {
+            pins = "gpio46", "gpio47";
+            function = "qup13";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
new file mode 100644
index 0000000000..b086a51842
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8180X TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8180x-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: east
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc8180x-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
+                atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
+                cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
+                dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
+                gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
+                hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
+                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
+                mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
+                pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
+                qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
+                qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
+                sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
+                tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
+                usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
+                wlan1_adc, wlan2_adc, wmss_reset ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3100000 {
+        compatible = "qcom,sc8180x-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x700000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 190>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup6";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup6";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..a9167dac9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP SoC LPASS LPI TLMM
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SC8280XP SoC.
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8280xp-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8280xp-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc8280xp-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-8])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s3_clk, i2s3_ws, i2s3_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    pinctrl@33c0000 {
+        compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 19>;
+
+        dmic01-state {
+            dmic01-clk-pins {
+                pins = "gpio16";
+                function = "dmic1_clk";
+            };
+
+            dmic01-clk-sleep-pins {
+                pins = "gpio16";
+                function = "dmic1_clk";
+            };
+        };
+
+        tx-swr-data-sleep-state {
+            pins = "gpio0", "gpio1";
+            function = "swr_tx_data";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
new file mode 100644
index 0000000000..4bd6d7977d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8280XP TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm SC8280XP SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc8280xp-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset, ufs1_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
+                cmu_rng, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5,
+                ddr_pxi6, ddr_pxi7, dp2_hot, dp3_hot, edp0_lcd, edp1_lcd,
+                edp2_lcd, edp3_lcd, edp_hot, emac0_dll, emac0_mcg0, emac0_mcg1,
+                emac0_mcg2, emac0_mcg3, emac0_phy, emac0_ptp, emac1_dll0,
+                emac1_dll1, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3,
+                emac1_phy, emac1_ptp, gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4,
+                gcc_gp5, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, ibi_i3c,
+                jitter_bist, lpass_slimbus, mdp0_vsync0, mdp0_vsync1,
+                mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5,
+                mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0,
+                mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
+                mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
+                mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s1_data0,
+                mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, mi2s2_data1,
+                mi2s2_sck, mi2s2_ws, mi2s_mclk1, mi2s_mclk2, pcie2a_clkreq,
+                pcie2b_clkreq, pcie3a_clkreq, pcie3b_clkreq, pcie4_clkreq,
+                phase_flag, pll_bist, pll_clk, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qspi, qspi_clk,
+                qspi_cs, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                qup18, qup19, qup20, qup21, qup22, qup23, rgmii_0, rgmii_1,
+                sd_write, sdc40, sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig,
+                tgu, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4,
+                usb0_dp, usb0_phy, usb0_sbrx, usb0_sbtx, usb0_usb4, usb1_dp,
+                usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
+                vsense_trigger ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sc8280xp-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 230>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup14";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup14";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
new file mode 100644
index 0000000000..508e0633b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM630 and SDM660 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm630-pinctrl
+      - qcom,sdm660-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: south
+      - const: center
+      - const: north
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 57
+
+  gpio-line-names:
+    maxItems: 114
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdm630-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdm630-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdm630-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
+                atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20,
+                atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0,
+                bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+                blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b,
+                blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+                blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a,
+                blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1,
+                blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
+                blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1,
+                gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
+                isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
+                mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
+                nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
+                phase_flag1, phase_flag10, phase_flag11, phase_flag12,
+                phase_flag13, phase_flag14, phase_flag15, phase_flag16,
+                phase_flag17, phase_flag18, phase_flag19, phase_flag2,
+                phase_flag20, phase_flag21, phase_flag22, phase_flag23,
+                phase_flag24, phase_flag25, phase_flag26, phase_flag27,
+                phase_flag28, phase_flag29, phase_flag3, phase_flag30,
+                phase_flag31, phase_flag4, phase_flag5, phase_flag6,
+                phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem,
+                pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b,
+                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
+                qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
+                qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk,
+                qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3,
+                qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu,
+                ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk,
+                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout,
+                vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
+                wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3100000 {
+        compatible = "qcom,sdm630-pinctrl";
+        reg = <0x03100000 0x400000>,
+              <0x03500000 0x400000>,
+              <0x03900000 0x400000>;
+        reg-names = "south", "center", "north";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 114>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        blsp1-uart1-default-state {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3";
+            function = "gpio";
+            drive-strength = <2>;
+            bias-disable;
+        };
+
+        blsp2_uart1_default: blsp2-uart1-active-state {
+            tx-rts-pins {
+                pins = "gpio16", "gpio19";
+                function = "blsp_uart5";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            rx-pins {
+                pins = "gpio17";
+                function = "blsp_uart5";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            cts-pins {
+                pins = "gpio18";
+                function = "blsp_uart5";
+                drive-strength = <2>;
+                bias-pull-down;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
new file mode 100644
index 0000000000..84a15f77e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDM670 TLMM block
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description: |
+  The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdm670-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdm670-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdm670-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+                atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
+                lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+                mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
+                pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
+                qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
+                qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
+                sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
+                tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
+                vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3400000 {
+        compatible = "qcom,sdm670-tlmm";
+        reg = <0x03400000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 151>;
+
+        qup-i2c9-state {
+            pins = "gpio6", "gpio7";
+            function = "qup9";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
new file mode 100644
index 0000000000..d301881ddf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-pinctrl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 75
+
+  gpio-line-names:
+    maxItems: 150
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdm845-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdm845-tlmm-state"
+        additionalProperties: false
+
+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
+$defs:
+  qcom-sdm845-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
+                atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
+                atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
+                audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
+                gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
+                lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
+                pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+                qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
+                qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
+                qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
+                sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
+                spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+                tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
+                tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
+                tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
+                wlan1_adc1, wlan2_adc0, wlan2_adc1]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@3400000 {
+        compatible = "qcom,sdm845-pinctrl";
+        reg = <0x03400000 0xc00000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 151>;
+        wakeup-parent = <&pdc_intc>;
+
+        ap-suspend-l-hog {
+            gpio-hog;
+            gpios = <126 GPIO_ACTIVE_LOW>;
+            output-low;
+        };
+
+        cci0-default-state {
+            pins = "gpio17", "gpio18";
+            function = "cci_i2c";
+
+            bias-pull-up;
+            drive-strength = <2>;
+        };
+
+        cam0-default-state {
+            rst-pins {
+                pins = "gpio9";
+                function = "gpio";
+
+                drive-strength = <16>;
+                bias-disable;
+            };
+
+            mclk0-pins {
+                pins = "gpio13";
+                function = "cam_mclk";
+
+                drive-strength = <16>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
new file mode 100644
index 0000000000..67af99dd8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX55 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC.
+
+properties:
+  compatible:
+    const: qcom,sdx55-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx55-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx55-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
+                blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
+                blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
+                blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
+                emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
+                gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
+                mgpi_clk, m_voc, native_char, native_char0, native_char1,
+                native_char2, native_char3, native_tsens, native_tsense,
+                nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
+                pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+                qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+                qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+                qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
+                qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
+                qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
+                qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
+                qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
+                qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
+                qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
+                qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
+                spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+                uim2_reset, usb2phy_ac, vsense_trigger ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@1f00000 {
+        compatible = "qcom,sdx55-pinctrl";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 108>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        serial-state {
+            pins = "gpio8", "gpio9";
+            function = "blsp_uart3";
+            drive-strength = <8>;
+            bias-disable;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
new file mode 100644
index 0000000000..27319782d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx65-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+        minItems: 1
+        maxItems: 150
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
+                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+                gpio ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx65-tlmm";
+        reg = <0x03000000 0xdc2000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 109>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
new file mode 100644
index 0000000000..7cb96aa75b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX75 TLMM block
+
+maintainers:
+  - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdx75-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 67
+
+  gpio-line-names:
+    maxItems: 133
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx75-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx75-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx75-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2,
+                coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist,
+                ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg,
+                emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc,
+                eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk,
+                gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist,
+                ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens,
+                native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e,
+                pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync,
+                pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+                qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss,
+                qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira,
+                qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3,
+                qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc,
+                rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb,
+                sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n,
+                spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1,
+                tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                usb2phy_ac_en, vsense_trigger_mirnat]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx75-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 133>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio12";
+                function = "qup_se1_l2_mira";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio13";
+                function = "qup_se1_l3_mira";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..abac3311fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 SoC LPASS LPI TLMM
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm6115-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: audio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6115-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6115-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6115-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-8])$"
+
+      function:
+        enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk,
+                i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk,
+                i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws,
+                swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+
+    lpass_tlmm: pinctrl@a7c0000 {
+        compatible = "qcom,sm6115-lpass-lpi-pinctrl";
+        reg = <0x0a7c0000 0x20000>,
+              <0x0a950000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "audio";
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 19>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
new file mode 100644
index 0000000000..871df54f69
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115
+  SoCs.
+
+properties:
+  compatible:
+    const: qcom,sm6115-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: south
+      - const: east
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  gpio-reserved-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6115-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6115-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6115-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
+                cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist,
+                mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte,
+                m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag,
+                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti,
+                qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb,
+                sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk,
+                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, elan1_adc1 ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,sm6115-tlmm";
+        reg = <0x500000 0x400000>,
+              <0x900000 0x400000>,
+              <0xd00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 114>;
+
+        sdc2_on_state: sdc2-on-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                bias-disable;
+                drive-strength = <16>;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            sd-cd-pins {
+                pins = "gpio88";
+                function = "gpio";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
new file mode 100644
index 0000000000..8d77707b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies, Inc. SM6125 TLMM block
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6125-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: south
+      - const: east
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6125-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6125-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6125-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
+                atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
+                atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
+                audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+                cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
+                dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
+                ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
+                nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
+                qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
+                qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
+                swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+                uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
+
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6125-tlmm";
+        reg = <0x00500000 0x400000>,
+              <0x00900000 0x400000>,
+              <0x00d00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 134>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
new file mode 100644
index 0000000000..27af379cf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6350 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 9
+    maxItems: 9
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 78
+
+  gpio-line-names:
+    maxItems: 156
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6350-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6350-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6350-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
+                atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
+                atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+                cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
+                dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
+                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
+                mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
+                phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+                phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+                phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+                phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+                phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
+                qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+                qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
+                qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
+                rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
+                sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm6350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio25";
+                function = "qup13_f2";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio26";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
new file mode 100644
index 0000000000..6e02ba2482
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6375 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6375-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6375-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6375-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2,
+                atest_usb1, atest_usb10, atest_usb11, atest_usb12,
+                atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
+                gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
+                m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
+                nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
+                phase_flag11, phase_flag12, phase_flag13, phase_flag14,
+                phase_flag15, phase_flag16, phase_flag17, phase_flag18,
+                phase_flag19, phase_flag2, phase_flag20, phase_flag21,
+                phase_flag22, phase_flag23, phase_flag24, phase_flag25,
+                phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+                phase_flag3, phase_flag30, phase_flag31, phase_flag4,
+                phase_flag5, phase_flag6, phase_flag7, phase_flag8,
+                phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
+                qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
+                qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
+                sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
+                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1 ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6375-tlmm";
+        reg = <0x00500000 0x800000>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>; /* GPIOs + ufs_reset */
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup13_f2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
new file mode 100644
index 0000000000..ede0f3acad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm7150-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM7150 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: north
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 60
+
+  gpio-line-names:
+    maxItems: 119
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm7150-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm7150-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm7150-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_tsens2, atest_usb1, atest_usb2, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2,
+                ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0,
+                gp_pdm1, gp_pdm2, gps_tx, jitter_bist, ldo_en, ldo_update,
+                m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mss_lte, nav_pps_in, nav_pps_out, pa_indicator,
+                pci_e, phase_flag, pll_bist, pll_bypassnl, pll_reset, pri_mi2s,
+                pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+                qlink_request, qua_mi2s, qup00, qup01, qup02, qup03, qup04,
+                qup10, qup11, qup12, qup13, qup14, qup15, sd_write, sdc40,
+                sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, ter_mi2s,
+                tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsif1_clk, tsif1_data,
+                tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, tsif2_data,
+                tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data,
+                uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+                uim2_reset, uim_batt, usb_phy, vfr_1, vsense_trigger,
+                wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
+                wsa_data ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3500000 {
+        compatible = "qcom,sm7150-tlmm";
+        reg = <0x03500000 0x300000>,
+              <0x03900000 0x300000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "north", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 120>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        wakeup-parent = <&pdc>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio44";
+                function = "qup12";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio45";
+                function = "qup12";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
new file mode 100644
index 0000000000..c643962646
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 TLMM pin controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8150-pinctrl
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: west
+      - const: east
+      - const: north
+      - const: south
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 88
+
+  gpio-line-names:
+    maxItems: 175
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8150-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8150-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8150-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
+                atest_char0, atest_char1, atest_char2, atest_char3, audio_ref,
+                atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12,
+                atest_usb13, atest_usb20, atest_usb21, atest_usb22,
+                atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+                ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps,
+                gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s,
+                jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator,
+                pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti,
+                qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3,
+                qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4,
+                qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13,
+                qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5,
+                qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu,
+                ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac,
+                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1, wmss_reset ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@3100000 {
+        compatible = "qcom,sm8150-pinctrl";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x300000>,
+              <0x03900000 0x300000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "north", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-ranges = <&tlmm 0 0 176>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        wakeup-parent = <&pdc>;
+
+        qup-spi0-default-state {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3";
+            function = "qup0";
+            drive-strength = <6>;
+            bias-disable;
+        };
+
+        pcie1-default-state {
+            perst-pins {
+                pins = "gpio102";
+                function = "gpio";
+                drive-strength = <2>;
+                bias-pull-down;
+            };
+
+            clkreq-pins {
+                pins = "gpio103";
+                function = "pci_e1";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            wake-pins {
+                pins = "gpio104";
+                function = "gpio";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..4b4be7efc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 SoC LPASS LPI TLMM
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8250 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-lpi-pinctrl
+
+  reg:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8250-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8250-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8250-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|1[0-3])$"
+        minItems: 1
+        maxItems: 14
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-bus-hold: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    lpi_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 14>;
+
+        wsa-swr-active-state {
+            clk-pins {
+                pins = "gpio10";
+                function = "wsa_swr_clk";
+                drive-strength = <2>;
+                slew-rate = <1>;
+                bias-disable;
+            };
+
+            data-pins {
+                pins = "gpio11";
+                function = "wsa_swr_data";
+                drive-strength = <2>;
+                slew-rate = <1>;
+            };
+        };
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 0000000000..021c547085
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Qualcomm SM8250 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8250-pinctrl
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: south
+      - const: north
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 90
+
+  gpio-line-names:
+    maxItems: 180
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8250-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8250-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8250-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+                ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+                pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+                qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+                qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+                qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+                sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+                tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+                tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+                tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+    required:
+      - pins
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@1f00000 {
+        compatible = "qcom,sm8250-pinctrl";
+        reg = <0x0f100000 0x300000>,
+              <0x0f500000 0x300000>,
+              <0x0f900000 0x300000>;
+        reg-names = "west", "south", "north";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 181>; /* GPIOs + ufs_reset */
+        wakeup-parent = <&pdc>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..2e65ae08dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 SoC LPASS LPI TLMM
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8350-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8350-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8350-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8350-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+      function:
+        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+                dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+                ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+                i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+                i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+                i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
+                swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
+                wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+
+    lpass_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sm8350-lpass-lpi-pinctrl";
+        reg = <0x033c0000 0x20000>,
+              <0x03550000 0x10000>;
+
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 15>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
new file mode 100644
index 0000000000..6e8f41ff0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8350 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8350 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8350-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 102
+
+  gpio-line-names:
+    maxItems: 203
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8350-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8350-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8350-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-2])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+                mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+                mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck,
+                mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav_gpio, pa_indicator,
+                pcie0_clkreqn, pcie1_clkreqn, phase_flag, pll_bist, pll_clk,
+                pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0,
+                qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10,
+                qup11, qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19,
+                qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5,
+                qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
+                uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 204>; /* GPIOs + ufs_reset */
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup3";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup3";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..1eefa9aa6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 SoC LPASS LPI TLMM
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8450-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8450-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8450-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
+                slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
+                ext_mclk1_e ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    pinctrl@3440000 {
+        compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+        reg = <0x3440000 0x20000>,
+              <0x34d0000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 23>;
+
+        wsa-swr-active-state {
+            clk-pins {
+                pins = "gpio10";
+                function = "wsa_swr_clk";
+                drive-strength = <2>;
+                slew-rate = <1>;
+                bias-disable;
+            };
+
+            data-pins {
+                pins = "gpio11";
+                function = "wsa_swr_data";
+                drive-strength = <2>;
+                slew-rate = <1>;
+            };
+        };
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
new file mode 100644
index 0000000000..5163fe3f53
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 210
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8450-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+    required:
+      - pins
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..ef97432468
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 SoC LPASS LPI TLMM
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+  (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC.
+
+properties:
+  compatible:
+    const: qcom,sm8550-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI MCC registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8550-lpass-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8550-lpass-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8550-lpass-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+      function:
+        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+                dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+                ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+                i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+                i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+                i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
+                swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
+                wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-bus-hold: true
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+    lpass_tlmm: pinctrl@6e80000 {
+        compatible = "qcom,sm8550-lpass-lpi-pinctrl";
+        reg = <0x06e80000 0x20000>,
+              <0x0725a000 0x10000>;
+
+        clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+        tx-swr-sleep-clk-state {
+            pins = "gpio0";
+            function = "swr_tx_clk";
+            drive-strength = <2>;
+            bias-pull-down;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
new file mode 100644
index 0000000000..f789c7753a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8550 TLMM block
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  "#interrupt-cells": true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 210
+
+  "#gpio-cells": true
+  gpio-ranges: true
+  wakeup-parent: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8550-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8550-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8550-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cci, aoss_cti, atest_char, atest_usb,
+                audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk,
+                cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl,
+                cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx,
+                coex_uart1_tx, coex_uart2_rx, coex_uart2_tx,
+                cri_trng, dbg_out_clk, ddr_bist_complete,
+                ddr_bist_fail, ddr_bist_start, ddr_bist_stop,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot,
+                gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0,
+                i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
+                i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
+                i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck,
+                i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws,
+                ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out,
+                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
+                mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2,
+                pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
+                pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
+                qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss,
+                qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
+                qup1_se5, qup1_se6, qup1_se7, qup2_se0,
+                qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira,
+                qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb,
+                qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1,
+                qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
+                qup2_se7, sd_write_protect, sdc40, sdc41, sdc42,
+                sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
+                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+                tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+                tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
+                uim0_clk, uim0_data, uim0_present, uim0_reset,
+                uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sm8550-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup2_se7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup2_se7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
new file mode 100644
index 0000000000..aae3dcf6ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This defines the common properties used to describe all Qualcomm Top Level
+  Mode Multiplexer bindings and pinconf/pinmux states for these.
+
+properties:
+  interrupts:
+    description:
+      TLMM summary IRQ and dirconn interrupts.
+    minItems: 1
+    maxItems: 9
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  wakeup-parent:
+    description:
+      Specifying the interrupt-controller used to wake up the system when the
+      TLMM block has been powered down.
+
+  gpio-reserved-ranges:
+    description:
+      Pins can be reserved for trusted applications and thereby unaccessible
+      from the OS.  This property can be used to mark the pins which resources
+      should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
+      information.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: true
+
+$defs:
+  qcom-tlmm-state:
+    properties:
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+      bias-pull-up: true
+      bias-disable: true
+      input-enable: false
+      output-disable: true
+      output-enable: true
+      output-high: true
+      output-low: true
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+      - if:
+          properties:
+            pins:
+              items:
+                pattern: "^gpio"
+        then:
+          required:
+            - function
+        else:
+          properties:
+            function: false
+
+    additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
new file mode 100644
index 0000000000..43b33dbf11
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT2880 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  Ralink RT2880 pin controller for RT2880 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt2880-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: uartlite
+            then:
+              properties:
+                groups:
+                  enum: [uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag]
+
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: sdram
+            then:
+              properties:
+                groups:
+                  enum: [sdram]
+
+          - if:
+              properties:
+                function:
+                  const: pci
+            then:
+              properties:
+                groups:
+                  enum: [pci]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,rt2880-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 0000000000..95a9042730
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  Ralink RT305X pin controller for RT3050, RT3052, and RT3350 SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt305x-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio,
+                   pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf,
+                   uartlite]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: gpio i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: gpio uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag]
+
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: pcm gpio
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: rgmii
+            then:
+              properties:
+                groups:
+                  enum: [rgmii]
+
+          - if:
+              properties:
+                function:
+                  const: sdram
+            then:
+              properties:
+                groups:
+                  enum: [sdram]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: uartlite
+            then:
+              properties:
+                groups:
+                  enum: [uartlite]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,rt305x-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
new file mode 100644
index 0000000000..c9bc6cfd83
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3352-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3352 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  Ralink RT3352 pin controller for RT3352 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt3352-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna,
+                   mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1,
+                   uartf, uartlite, wdg_cs1]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1,
+                         uartf, uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: gpio i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: gpio uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag]
+
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [led]
+
+          - if:
+              properties:
+                function:
+                  const: lna
+            then:
+              properties:
+                groups:
+                  enum: [lna]
+
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: pa
+            then:
+              properties:
+                groups:
+                  enum: [pa]
+
+          - if:
+              properties:
+                function:
+                  const: pcm gpio
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: rgmii
+            then:
+              properties:
+                groups:
+                  enum: [rgmii]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: spi_cs1
+            then:
+              properties:
+                groups:
+                  enum: [spi_cs1]
+
+          - if:
+              properties:
+                function:
+                  const: uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: uartlite
+            then:
+              properties:
+                groups:
+                  enum: [uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: wdg_cs1
+            then:
+              properties:
+                groups:
+                  enum: [spi_cs1]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,rt3352-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 0000000000..8d14e525b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  Ralink RT3883 pin controller for RT3883 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt3883-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag,
+                   lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2,
+                   pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: ge1
+            then:
+              properties:
+                groups:
+                  enum: [ge1]
+
+          - if:
+              properties:
+                function:
+                  const: ge2
+            then:
+              properties:
+                groups:
+                  enum: [ge2]
+
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi,
+                         uartf, uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: gpio i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: gpio uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag]
+
+          - if:
+              properties:
+                function:
+                  const: lna a
+            then:
+              properties:
+                groups:
+                  enum: [lna a]
+
+          - if:
+              properties:
+                function:
+                  const: lna g
+            then:
+              properties:
+                groups:
+                  enum: [lna g]
+
+          - if:
+              properties:
+                function:
+                  const: mdio
+            then:
+              properties:
+                groups:
+                  enum: [mdio]
+
+          - if:
+              properties:
+                function:
+                  const: pci-dev
+            then:
+              properties:
+                groups:
+                  enum: [pci]
+
+          - if:
+              properties:
+                function:
+                  const: pci-fnc
+            then:
+              properties:
+                groups:
+                  enum: [pci]
+
+          - if:
+              properties:
+                function:
+                  const: pci-host1
+            then:
+              properties:
+                groups:
+                  enum: [pci]
+
+          - if:
+              properties:
+                function:
+                  const: pci-host2
+            then:
+              properties:
+                groups:
+                  enum: [pci]
+
+          - if:
+              properties:
+                function:
+                  const: pcm gpio
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: uartlite
+            then:
+              properties:
+                groups:
+                  enum: [uartlite]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,rt3883-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
new file mode 100644
index 0000000000..f248202ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt5350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT5350 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  Ralink RT5350 pin controller for RT5350 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt5350-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+        additionalProperties: false
+
+        properties:
+          function:
+            description:
+              A string containing the name of the function to mux to the group.
+            enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led,
+                   pcm gpio, pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite,
+                   wdg_cs1]
+
+          groups:
+            description:
+              An array of strings. Each string contains the name of a group.
+            maxItems: 1
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: gpio
+            then:
+              properties:
+                groups:
+                  enum: [i2c, jtag, led, spi, spi_cs1, uartf, uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: gpio i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: gpio uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c]
+
+          - if:
+              properties:
+                function:
+                  const: i2s uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: jtag
+            then:
+              properties:
+                groups:
+                  enum: [jtag]
+
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [led]
+
+          - if:
+              properties:
+                function:
+                  const: pcm gpio
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm i2s
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: pcm uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spi]
+
+          - if:
+              properties:
+                function:
+                  const: spi_cs1
+            then:
+              properties:
+                groups:
+                  enum: [spi_cs1]
+
+          - if:
+              properties:
+                function:
+                  const: uartf
+            then:
+              properties:
+                groups:
+                  enum: [uartf]
+
+          - if:
+              properties:
+                function:
+                  const: uartlite
+            then:
+              properties:
+                groups:
+                  enum: [uartlite]
+
+          - if:
+              properties:
+                function:
+                  const: wdg_cs1
+            then:
+              properties:
+                groups:
+                  enum: [spi_cs1]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+      compatible = "ralink,rt5350-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 0000000000..181cd1676c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+  On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - renesas,pfc-emev2       # EMMA Mobile EV2
+      - renesas,pfc-r8a73a4     # R-Mobile APE6
+      - renesas,pfc-r8a7740     # R-Mobile A1
+      - renesas,pfc-r8a7742     # RZ/G1H
+      - renesas,pfc-r8a7743     # RZ/G1M
+      - renesas,pfc-r8a7744     # RZ/G1N
+      - renesas,pfc-r8a7745     # RZ/G1E
+      - renesas,pfc-r8a77470    # RZ/G1C
+      - renesas,pfc-r8a774a1    # RZ/G2M
+      - renesas,pfc-r8a774b1    # RZ/G2N
+      - renesas,pfc-r8a774c0    # RZ/G2E
+      - renesas,pfc-r8a774e1    # RZ/G2H
+      - renesas,pfc-r8a7778     # R-Car M1
+      - renesas,pfc-r8a7779     # R-Car H1
+      - renesas,pfc-r8a7790     # R-Car H2
+      - renesas,pfc-r8a7791     # R-Car M2-W
+      - renesas,pfc-r8a7792     # R-Car V2H
+      - renesas,pfc-r8a7793     # R-Car M2-N
+      - renesas,pfc-r8a7794     # R-Car E2
+      - renesas,pfc-r8a7795     # R-Car H3
+      - renesas,pfc-r8a7796     # R-Car M3-W
+      - renesas,pfc-r8a77961    # R-Car M3-W+
+      - renesas,pfc-r8a77965    # R-Car M3-N
+      - renesas,pfc-r8a77970    # R-Car V3M
+      - renesas,pfc-r8a77980    # R-Car V3H
+      - renesas,pfc-r8a77990    # R-Car E3
+      - renesas,pfc-r8a77995    # R-Car D3
+      - renesas,pfc-r8a779a0    # R-Car V3U
+      - renesas,pfc-r8a779f0    # R-Car S4-8
+      - renesas,pfc-r8a779g0    # R-Car V4H
+      - renesas,pfc-sh73a0      # SH-Mobile AG5
+
+  reg:
+    minItems: 1
+    maxItems: 10
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 16
+
+  interrupts-extended:
+    minItems: 32
+    maxItems: 64
+    description:
+      Specify the interrupts associated with external IRQ pins on SoCs where
+      the PFC acts as a GPIO controller.  It must contain one interrupt per
+      external IRQ, sorted by external IRQ number.
+
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      enum:
+        - renesas,pfc-r8a73a4
+        - renesas,pfc-r8a7740
+        - renesas,pfc-sh73a0
+then:
+  required:
+    - interrupts-extended
+    - gpio-controller
+    - '#gpio-cells'
+    - gpio-ranges
+    - power-domains
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        function: true
+        groups: true
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength:
+          enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+        power-source:
+          enum: [ 1800, 3300 ]
+        gpio-hog: true
+        gpios: true
+        input: true
+        output-high: true
+        output-low: true
+
+      additionalProperties: false
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    pfc: pinctrl@e6050000 {
+            compatible = "renesas,pfc-r8a7740";
+            reg = <0xe6050000 0x8000>,
+                  <0xe605800c 0x20>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pfc 0 0 212>;
+            interrupts-extended =
+                <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+                <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+                <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+                <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+                <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+                <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+                <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+                <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+            power-domains = <&pd_c5>;
+
+            lcd0-mux-hog {
+                    /* DBGMD/LCDC0/FSIA MUX */
+                    gpio-hog;
+                    gpios = <176 0>;
+                    output-high;
+            };
+    };
+
+  - |
+    pinctrl@e6060000 {
+            compatible = "renesas,pfc-r8a7795";
+            reg = <0xe6060000 0x50c>;
+
+            avb_pins: avb {
+                    mux {
+                            groups = "avb_link", "avb_mdio", "avb_mii";
+                            function = "avb";
+                    };
+
+                    pins_mdio {
+                            groups = "avb_mdio";
+                            drive-strength = <24>;
+                    };
+
+                    pins_mii_tx {
+                            pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+                                   "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+                                   "PIN_AVB_TD3";
+                            drive-strength = <12>;
+                    };
+            };
+
+            keys_pins: keys {
+                    pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+                    bias-pull-up;
+            };
+
+            sdhi0_pins: sd0 {
+                    groups = "sdhi0_data4", "sdhi0_ctrl";
+                    function = "sdhi0";
+                    power-source = <3300>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
new file mode 100644
index 0000000000..2bd7d47d0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 combined Pin and GPIO controller
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO
+  controller, named "Ports" in the hardware reference manual.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis
+  writing configuration values to per-port register sets.
+  Each "port" features up to 16 pins, each of them configurable for GPIO
+  function (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r7s72100-ports     # RZ/A1H
+      - items:
+          - const: renesas,r7s72101-ports # RZ/A1M
+          - const: renesas,r7s72100-ports # fallback
+      - const: renesas,r7s72102-ports     # RZ/A1L
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^gpio-[0-9]*$":
+    type: object
+    additionalProperties: false
+
+    description:
+      Each port of the r7s72100 pin controller hardware is itself a GPIO
+      controller.
+      Different SoCs have different numbers of available pins per port, but
+      generally speaking, each of them can be configured in GPIO ("port") mode
+      on this hardware.
+      Describe GPIO controllers using sub-nodes with the following properties.
+
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - gpio-ranges
+
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+        A few alternate function require special pin configuration flags to be
+        supplied along with the alternate function configuration number.
+        The hardware reference manual specifies when a pin function requires
+        "software IO driven" mode to be specified. To do so use the generic
+        properties from the <include/linux/pinctrl/pinconf_generic.h> header
+        file to instruct the pin controller to perform the desired pin
+        configuration operation.
+        The hardware reference manual specifies when a pin has to be configured
+        to work in bi-directional mode and when the IO direction has to be
+        specified by software. Bi-directional pins must be managed by the pin
+        controller driver internally, while software driven IO direction has to
+        be explicitly selected when multiple options are available.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Helper macros to ease assembling the pin index from its position
+            (port where it sits on and pin number) and alternate function
+            identifier are provided by the pin controller header file at:
+            <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
+            Integers values in "pinmux" argument list are assembled as:
+            ((PORT * 16 + PIN) | MUX_FUNC << 16)
+
+        input-enable: true
+        output-enable: true
+
+      required:
+        - pinmux
+
+      additionalProperties: false
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+    pinctrl: pinctrl@fcfe3000 {
+            compatible = "renesas,r7s72100-ports";
+
+            reg = <0xfcfe3000 0x4230>;
+
+            /*
+             * A GPIO controller node, controlling 16 pins indexed from 0.
+             * The GPIO controller base in the global pin indexing space is pin
+             * 48, thus pins [0 - 15] on this controller map to pins [48 - 63]
+             * in the global pin indexing space.
+             */
+            port3: gpio-3 {
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    gpio-ranges = <&pinctrl 0 48 16>;
+            };
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             * Pin #0 on port #3 is configured as alternate function #6.
+             * Pin #2 on port #3 is configured as alternate function #4.
+             */
+            scif2_pins: serial2 {
+                    pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+            };
+
+
+            /*
+             * I2c master: both SDA and SCL pins need bi-directional operations
+             * Pin #4 on port #1 is configured as alternate function #1.
+             * Pin #5 on port #1 is configured as alternate function #1.
+             * Both need to work in bi-directional mode, the driver must manage
+             * this internally.
+             */
+            i2c2_pins: i2c2 {
+                    pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+            };
+
+
+            /*
+             * Multi-function timer input and output compare pins.
+             */
+            tioc0_pins: tioc0 {
+                    /*
+                     * Configure TIOC0A as software driven input
+                     * Pin #0 on port #4 is configured as alternate function #2
+                     * with IO direction specified by software as input.
+                     */
+                    tioc0_input_pins {
+                            pinmux = <RZA1_PINMUX(4, 0, 2)>;
+                            input-enable;
+                    };
+
+                    /*
+                     * Configure TIOC0B as software driven output
+                     * Pin #1 on port #4 is configured as alternate function #1
+                     * with IO direction specified by software as output.
+                     */
+                    tioc0_output_pins {
+                            pinmux = <RZA1_PINMUX(4, 1, 1)>;
+                            output-enable;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
new file mode 100644
index 0000000000..8271e7b2c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A2 combined Pin and GPIO controller
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO
+  controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 8 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    const: "renesas,r7s9210-pinctrl" # RZ/A2M
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZA2_PIN() helper macro in r7s9210-pinctrl.h.
+      E.g. "RZA2_PIN(PORT6, 0)" for P6_0.
+
+  gpio-ranges:
+    maxItems: 1
+
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  description:
+    The child nodes of the pin controller designate pins to be used for
+    specific peripheral functions or as GPIO.
+
+    A pin multiplexing sub-node describes how to configure a set of
+    (or a single) pin in some desired alternate function mode.
+    The values for the pinmux properties are a combination of port name,
+    pin number and the desired function index. Use the RZA2_PINMUX macro
+    located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+    define these.
+    For assigning GPIO pins, use the macro RZA2_PIN also in
+    to express the desired port pin.
+
+  properties:
+    pinmux:
+      description:
+        Values are constructed from GPIO port number, pin number, and
+        alternate function configuration number using the RZA2_PINMUX()
+        helper macro in r7s9210-pinctrl.h.
+
+  required:
+    - pinmux
+
+  additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+    pinctrl: pinctrl@fcffe000 {
+            compatible = "renesas,r7s9210-pinctrl";
+            reg = <0xfcffe000 0x1000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 176>;
+
+            /* Serial Console */
+            scif4_pins: serial4 {
+                    pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
+                             <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
new file mode 100644
index 0000000000..145c5442f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and
+  GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 8 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
+              - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+
+      - items:
+          - enum:
+              - renesas,r9a07g054-pinctrl     # RZ/V2L
+          - const: renesas,r9a07g044-pinctrl  # RZ/G2{L,LC} fallback for RZ/V2L
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZG2L_GPIO(39, 1)" for P39_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell is used to specify the flag.
+      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+      being used as an interrupt.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: GPIO_RSTN signal
+      - description: GPIO_PORT_RESETN signal
+      - description: GPIO_SPARE_RESETN signal
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZG2L_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
+        pins: true
+        drive-strength:
+          enum: [ 2, 4, 8, 12 ]
+        output-impedance-ohms:
+          enum: [ 33, 50, 66, 100 ]
+        power-source:
+          description: I/O voltage in millivolt.
+          enum: [ 1800, 2500, 3300 ]
+        slew-rate: true
+        gpio-hog: true
+        gpios: true
+        input-enable: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    pinctrl: pinctrl@11030000 {
+            compatible = "renesas,r9a07g044-pinctrl";
+            reg = <0x11030000 0x10000>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 392>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+            resets = <&cpg R9A07G044_GPIO_RSTN>,
+                     <&cpg R9A07G044_GPIO_PORT_RESETN>,
+                     <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+            power-domains = <&cpg>;
+
+            scif0_pins: serial0 {
+                    pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */
+                             <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */
+            };
+
+            i2c1_pins: i2c1 {
+                    pins = "RIIC1_SDA", "RIIC1_SCL";
+                    input-enable;
+            };
+
+            sd1-pwr-en-hog {
+                    gpio-hog;
+                    gpios = <RZG2L_GPIO(39, 2) 0>;
+                    output-high;
+                    line-name = "sd1_pwr_en";
+            };
+
+            sdhi1_pins: sd1 {
+                    sd1_mux {
+                            pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
+                                     <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
+                            power-source  = <3300>;
+                    };
+
+                    sd1_data {
+                            pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+                            power-source  = <3300>;
+                    };
+
+                    sd1_ctrl {
+                            pins = "SD1_CLK", "SD1_CMD";
+                            power-source  = <3300>;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml
new file mode 100644
index 0000000000..ab2d456c93
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-poeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Port Output Enable for GPT (POEG)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The output pins(GTIOCxA and GTIOCxB) of the general PWM timer (GPT) can be
+  disabled by using the port output enabling function for the GPT (POEG).
+  Specifically, either of the following ways can be used.
+  * Input level detection of the GTETRGA to GTETRGD pins.
+  * Output-disable request from the GPT.
+  * SSF bit setting(ie, by setting POEGGn.SSF to 1)
+
+  The state of the GTIOCxA and the GTIOCxB pins when the output is disabled,
+  are controlled by the GPT module.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-poeg  # RZ/G2{L,LC}
+          - renesas,r9a07g054-poeg  # RZ/V2L
+      - const: renesas,rzg2l-poeg
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,gpt:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to gpt instance that serves the pwm operation.
+
+  renesas,poeg-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    description: |
+      POEG group index. Valid values are:
+        <0> : POEG group A
+        <1> : POEG group B
+        <2> : POEG group C
+        <3> : POEG group D
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - renesas,poeg-id
+  - renesas,gpt
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    poeggd: poeg@10049400 {
+        compatible = "renesas,r9a07g044-poeg", "renesas,rzg2l-poeg";
+        reg = <0x10049400 0x400>;
+        interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_POEG_D_CLKP>;
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_POEG_D_RST>;
+        renesas,poeg-id = <3>;
+        renesas,gpt = <&gpt>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
new file mode 100644
index 0000000000..816688580e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Pin Controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-pinctrl # RZ/N1D
+          - renesas,r9a06g033-pinctrl # RZ/N1S
+      - const: renesas,rzn1-pinctrl   # Generic RZ/N1
+
+  reg:
+    items:
+      - description: GPIO Multiplexing Level1 Register Block
+      - description: GPIO Multiplexing Level2 Register Block
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: bus
+    description:
+      The bus clock, sometimes described as pclk, for register accesses.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        A pin multiplexing sub-node describes how to configure a set of (or a
+        single) pin in some desired alternate function mode.
+        A single sub-node may define several pin configurations.
+
+      properties:
+        pinmux:
+          description: |
+            Integer array representing pin number and pin multiplexing
+            configuration.
+            When a pin has to be configured in alternate function mode, use
+            this property to identify the pin by its global index, and provide
+            its alternate function configuration number along with it.
+            When multiple pins are required to be configured as part of the
+            same alternate function they shall be specified as members of the
+            same argument list of a single "pinmux" property.
+            Integers values in the "pinmux" argument list are assembled as:
+            (PIN | MUX_FUNC << 8)
+            where PIN directly corresponds to the pl_gpio pin number and
+            MUX_FUNC is one of the alternate function identifiers defined in:
+            <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+            These identifiers collapse the IO Multiplex Configuration Level 1
+            and Level 2 numbers that are detailed in the hardware reference
+            manual into a single number. The identifiers for Level 2 are simply
+            offset by 10.  Additional identifiers are provided to specify the
+            MDIO source peripheral.
+
+        bias-disable: true
+        bias-pull-up:
+          description: Pull up the pin with 50 kOhm
+        bias-pull-down:
+          description: Pull down the pin with 50 kOhm
+        bias-high-impedance: true
+        drive-strength:
+          enum: [ 4, 6, 8, 12 ]
+
+      required:
+        - pinmux
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+    pinctrl: pinctrl@40067000 {
+            compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+            reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+            clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+            clock-names = "bus";
+
+            /*
+             * A serial communication interface with a TX output pin and an RX
+             * input pin.
+             */
+            pins_uart0: pins_uart0 {
+                    pinmux = <
+                            RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+                            RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+                    >;
+            };
+
+            /*
+             * Set the pull-up on the RXD pin of the UART.
+             */
+            pins_uart0_alt: pins_uart0_alt {
+                    pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
+
+                    pins_uart6_rx {
+                            pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
+                            bias-pull-up;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
new file mode 100644
index 0000000000..cb81a17bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M combined Pin and GPIO controller
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The Renesas RZ/V2M SoC features a combined Pin and GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 16 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    const: renesas,r9a09g011-pinctrl # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZV2M_GPIO(8, 1)" for P8_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description: INEXINT[0..38] corresponding to individual pin inputs.
+    maxItems: 39
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZV2M_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>.
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength-microamp:
+          # Superset of supported values
+          enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000,
+                  9000, 9600, 11000, 12000, 13000, 18000 ]
+        slew-rate:
+          description: 0 is slow slew rate, 1 is fast slew rate
+          enum: [ 0, 1 ]
+        gpio-hog: true
+        gpios: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl: pinctrl@b6250000 {
+            compatible = "renesas,r9a09g011-pinctrl";
+            reg = <0xb6250000 0x800>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 352>;
+            interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+            resets = <&cpg R9A09G011_PFC_PRESETN>;
+            power-domains = <&cpg>;
+
+            i2c2_pins: i2c2 {
+                    pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+                             <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
new file mode 100644
index 0000000000..10c335efe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Pinmux Controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The Rockchip Pinmux Controller enables the IC to share one PAD
+  to several functional blocks. The sharing is done by multiplexing
+  the PAD input/output signals. For each PAD there are several muxing
+  options with option 0 being used as a GPIO.
+
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  The Rockchip pin configuration node is a node of a group of pins which can be
+  used for a specific device or function. This node represents both mux and
+  config of the pins in that group. The 'pins' selects the function mode
+  (also named pin mode) this pin can work on and the 'config' configures
+  various pad settings such as pull-up, etc.
+
+  The pins are grouped into up to 9 individual pin banks which need to be
+  defined as gpio sub-nodes of the pinmux controller.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-pinctrl
+      - rockchip,rk2928-pinctrl
+      - rockchip,rk3036-pinctrl
+      - rockchip,rk3066a-pinctrl
+      - rockchip,rk3066b-pinctrl
+      - rockchip,rk3128-pinctrl
+      - rockchip,rk3188-pinctrl
+      - rockchip,rk3228-pinctrl
+      - rockchip,rk3288-pinctrl
+      - rockchip,rk3308-pinctrl
+      - rockchip,rk3328-pinctrl
+      - rockchip,rk3368-pinctrl
+      - rockchip,rk3399-pinctrl
+      - rockchip,rk3568-pinctrl
+      - rockchip,rk3588-pinctrl
+      - rockchip,rv1108-pinctrl
+      - rockchip,rv1126-pinctrl
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF registers.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the PMU registers,
+      as some SoCs carry parts of the iomux controller registers there.
+      Required for at least rk3188 and rk3288. On the rk3368 this should
+      point to the PMUGRF syscon.
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - rockchip,grf
+
+patternProperties:
+  "gpio@[0-9a-f]+$":
+    type: object
+
+    $ref: /schemas/gpio/rockchip,gpio-bank.yaml#
+    deprecated: true
+
+    unevaluatedProperties: false
+
+  "pcfg-[a-z0-9-]+$":
+    type: object
+    properties:
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-pin-default: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        minimum: 0
+        maximum: 20
+
+      input-enable: true
+
+      input-schmitt-enable: true
+
+      output-high: true
+
+      output-low: true
+
+    additionalProperties: false
+
+additionalProperties:
+  type: object
+  additionalProperties:
+    type: object
+    properties:
+      rockchip,pins:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        items:
+          items:
+            - minimum: 0
+              maximum: 8
+              description:
+                Pin bank.
+            - minimum: 0
+              maximum: 31
+              description:
+                Pin bank index.
+            - minimum: 0
+              maximum: 13
+              description:
+                Mux 0 means GPIO and mux 1 to N means
+                the specific device function.
+            - description:
+                The phandle of a node contains the generic pinconfig options
+                to use as described in pinctrl-bindings.txt.
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    pinctrl: pinctrl {
+      compatible = "rockchip,rk3066a-pinctrl";
+      rockchip,grf = <&grf>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@20034000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x20034000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      pcfg_pull_default: pcfg-pull-default {
+        bias-pull-pin-default;
+      };
+
+      uart2 {
+        uart2_xfer: uart2-xfer {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+                          <1 RK_PB1 1 &pcfg_pull_default>;
+        };
+      };
+    };
+
+    uart2: serial@20064000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x20064000 0x400>;
+      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&mux_uart2>;
+      pinctrl-0 = <&uart2_xfer>;
+      pinctrl-names = "default";
+      reg-io-width = <1>;
+      reg-shift = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
new file mode 100644
index 0000000000..8cf3c47ab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#interrupt-cells':
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+    const: 2
+
+  interrupt-controller:
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+
+  interrupts:
+    description:
+      For GPIO banks supporting direct external wake-up interrupts (without
+      multiplexing).  Number of interrupts must match number of wake-up capable
+      pins of this bank.
+    minItems: 1
+    maxItems: 8
+
+required:
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
new file mode 100644
index 0000000000..f796f27bf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  The values used for config properties should be derived from the hardware
+  manual and these values are programmed as-is into the pin pull up/down and
+  driver strength register of the pin-controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  samsung,pins:
+    description: |
+      List of pins to configure. For initial and sleep states, the maximum
+      number is one pin. In other cases there is no upper limit.
+
+      The pins should use lowercase names matching hardware manual, e.g. for
+      GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  samsung,pin-function:
+    description: |
+      The pin function selection that should be applied on the pins listed in the
+      child node is specified using the "samsung,pin-function" property. The value
+      of this property that should be applied to each of the pins listed in the
+      "samsung,pins" property should be picked from the hardware manual of the SoC
+      for the specified pin group. This property is optional in the child node if
+      no specific function selection is desired for the pins listed in the child
+      node. The value of this property is used as-is to program the pin-controller
+      function selector register of the pin-bank.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-drv:
+    description: Drive strength configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-pud:
+    description: Pull up/down configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-val:
+    description: Initial value of pin output buffer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  samsung,pin-con-pdn:
+    description: Function in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-pud-pdn:
+    description: Pull up/down configuration in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - samsung,pins
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
new file mode 100644
index 0000000000..1de91a5123
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
+  For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt
+  controllers, only one pin-controller device node can include external wake-up
+  interrupts child node (in other words, only one External wake-up interrupts
+  pin-controller is supported).
+  For newer controllers, multiple pin-controller device node can include
+  external wake-up interrupts child node.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-wakeup-eint
+      - samsung,s3c2412-wakeup-eint
+      - samsung,s3c64xx-wakeup-eint
+      - samsung,s5pv210-wakeup-eint
+      - samsung,exynos4210-wakeup-eint
+      - samsung,exynos7-wakeup-eint
+      - samsung,exynos850-wakeup-eint
+      - samsung,exynosautov9-wakeup-eint
+
+  interrupts:
+    description:
+      Interrupt used by multiplexed external wake-up interrupts.
+    minItems: 1
+    maxItems: 6
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-wakeup-eint
+              - samsung,s3c2412-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3c64xx-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-wakeup-eint
+              - samsung,exynos4210-wakeup-eint
+              - samsung,exynos7-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wakeup-eint
+              - samsung,exynosautov9-wakeup-eint
+    then:
+      properties:
+        interrupts: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
new file mode 100644
index 0000000000..2661462177
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -0,0 +1,387 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  All the pin controller nodes should be represented in the aliases node using
+  the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+  The controller supports three types of interrupts::
+   - External GPIO interrupts (see interrupts property in pin controller node);
+
+   - External wake-up interrupts - multiplexed (capable of waking up the system
+     see interrupts property in external wake-up interrupt controller node -
+     samsung,pinctrl-wakeup-interrupt.yaml);
+
+   - External wake-up interrupts - direct (capable of waking up the system, see
+     interrupts property in every bank of pin controller with external wake-up
+     interrupt controller - samsung,pinctrl-gpio-bank.yaml).
+
+properties:
+  $nodename:
+    pattern: "^pinctrl(@.*)?"
+
+  compatible:
+    enum:
+      - samsung,s3c2412-pinctrl
+      - samsung,s3c2416-pinctrl
+      - samsung,s3c2440-pinctrl
+      - samsung,s3c2450-pinctrl
+      - samsung,s3c64xx-pinctrl
+      - samsung,s5pv210-pinctrl
+      - samsung,exynos3250-pinctrl
+      - samsung,exynos4210-pinctrl
+      - samsung,exynos4x12-pinctrl
+      - samsung,exynos5250-pinctrl
+      - samsung,exynos5260-pinctrl
+      - samsung,exynos5410-pinctrl
+      - samsung,exynos5420-pinctrl
+      - samsung,exynos5433-pinctrl
+      - samsung,exynos7-pinctrl
+      - samsung,exynos7885-pinctrl
+      - samsung,exynos850-pinctrl
+      - samsung,exynosautov9-pinctrl
+      - tesla,fsd-pinctrl
+
+  interrupts:
+    description:
+      Required for GPIO banks supporting external GPIO interrupts.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    description:
+      Second base address of the pin controller if the specific registers of
+      the pin controller are separated into the different base address.
+      Only certain banks of certain pin controller might need it.
+    minItems: 1
+    maxItems: 2
+
+  wakeup-interrupt-controller:
+    $ref: samsung,pinctrl-wakeup-interrupt.yaml
+
+patternProperties:
+  "^[a-z]+[0-9]*-gpio-bank$":
+    description:
+      Pin banks of the controller are represented by child nodes of the
+      controller node. Bank name is taken from name of the node.
+    $ref: samsung,pinctrl-gpio-bank.yaml
+
+  "^[a-z0-9-]+-pins$":
+    oneOf:
+      - $ref: samsung,pinctrl-pins-cfg.yaml
+        required:
+          - samsung,pins
+      - type: object
+        patternProperties:
+          "^[a-z0-9-]+-pins$":
+            $ref: samsung,pinctrl-pins-cfg.yaml
+
+        additionalProperties: false
+
+  "^(initial|sleep)-state$":
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
+        $ref: samsung,pinctrl-pins-cfg.yaml
+
+        properties:
+          samsung,pins:
+            description: See samsung,pinctrl-pins-cfg.yaml
+            $ref: /schemas/types.yaml#/definitions/string-array
+            maxItems: 1
+
+        required:
+          - samsung,pins
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@7f008000 {
+        compatible = "samsung,s3c64xx-pinctrl";
+        reg = <0x7f008000 0x1000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <21>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,s3c64xx-wakeup-eint";
+            interrupts-extended = <&vic0 0>,
+                                  <&vic0 1>,
+                                  <&vic1 0>,
+                                  <&vic1 1>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa-0", "gpa-1";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+        };
+
+        // ...
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@11400000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11400000 0x1000>;
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&sleep0>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa0-0", "gpa0-1";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+        };
+
+        // ...
+
+        sleep0: sleep-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-con-pdn = <2>;
+                samsung,pin-pud-pdn = <0>;
+            };
+
+            gpa0-1-pin {
+                samsung,pins = "gpa0-1";
+                samsung,pin-con-pdn = <0>;
+                samsung,pin-pud-pdn = <0>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@11000000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos4210-wakeup-eint";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpj0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        /* Pin bank without external interrupts */
+        gpy0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpx0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        sd0-clk-pins {
+            samsung,pins = "gpk0-0";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <3>;
+        };
+
+        sd4-bus-width8-pins {
+            part-1-pins {
+                samsung,pins = "gpk0-3", "gpk0-4",
+                               "gpk0-5", "gpk0-6";
+                samsung,pin-function = <3>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <3>;
+            };
+
+            part-2-pins {
+                samsung,pins = "gpk1-3", "gpk1-4",
+                               "gpk1-5", "gpk1-6";
+                samsung,pin-function = <4>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <3>;
+            };
+        };
+
+        // ...
+
+        otg-gp-pins {
+            samsung,pins = "gpx3-3";
+            samsung,pin-function = <1>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+            samsung,pin-val = <0>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@10580000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&initial_alive>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos7-wakeup-eint";
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        te-irq-pins {
+            samsung,pins = "gpf1-3";
+            samsung,pin-function = <0xf>;
+        };
+
+        // ..
+
+        initial_alive: initial-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-function = <0>;
+                samsung,pin-pud = <1>;
+                samsung,pin-drv = <0>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@114b0000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x114b0000 0x1000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_aud>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpz0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        i2s0-bus-pins {
+            samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+                           "gpz0-4", "gpz0-5", "gpz0-6";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+        };
+
+        // ...
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
new file mode 100644
index 0000000000..4214d7311f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech SX150x GPIO expander
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx1501q
+      - semtech,sx1502q
+      - semtech,sx1503q
+      - semtech,sx1504q
+      - semtech,sx1505q
+      - semtech,sx1506q
+      - semtech,sx1507q
+      - semtech,sx1508q
+      - semtech,sx1509q
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  semtech,probe-reset:
+    description: Will trigger a reset of the GPIO expander on probe
+    type: boolean
+
+patternProperties:
+  '-cfg$':
+    type: object
+    properties:
+      pins: true
+
+      bias-disable: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-push-pull: true
+      output-low: true
+      output-high: true
+      drive-open-drain: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+      - if:
+          properties:
+            pins:
+              contains:
+                const: oscio
+        then:
+          properties:
+            bias-disable: false
+            bias-pull-up: false
+            bias-pull-down: false
+            bias-pull-pin-default: false
+            drive-open-drain: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - semtech,sx1507q
+                - semtech,sx1508q
+                - semtech,sx1509q
+    then:
+      properties:
+        semtech,probe-reset: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1501q
+              - semtech,sx1504q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^gpio[0-3]$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1502q
+              - semtech,sx1505q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^gpio[0-7]$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - semtech,sx1503q
+              - semtech,sx1506q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(gpio[0-9]|gpio1[0-5])$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: semtech,sx1507q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(oscio|gpio[0-3])$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: semtech,sx1508q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(oscio|gpio[0-7])$'
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: semtech,sx1509q
+    then:
+      patternProperties:
+        '-cfg$':
+          properties:
+            pins:
+              items:
+                pattern: '^(oscio|gpio[0-9]|gpio1[0-5])$'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c@1000 {
+        reg = <0x1000 0x80>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl@20 {
+            compatible = "semtech,sx1501q";
+            reg = <0x20>;
+
+            #gpio-cells = <2>;
+            #interrupt-cells = <2>;
+
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+            gpio-controller;
+            interrupt-controller;
+
+            gpio1-cfg {
+                  pins = "gpio1";
+                  bias-pull-up;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
new file mode 100644
index 0000000000..880da721a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SoCs pin controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld4-pinctrl
+      - socionext,uniphier-pro4-pinctrl
+      - socionext,uniphier-sld8-pinctrl
+      - socionext,uniphier-pro5-pinctrl
+      - socionext,uniphier-pxs2-pinctrl
+      - socionext,uniphier-ld6b-pinctrl
+      - socionext,uniphier-ld11-pinctrl
+      - socionext,uniphier-ld20-pinctrl
+      - socionext,uniphier-pxs3-pinctrl
+      - socionext,uniphier-nx1-pinctrl
+
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  properties:
+    function: true
+    groups: true
+    pins: true
+    bias-pull-up: true
+    bias-pull-down: true
+    bias-pull-pin-default: true
+    drive-strength: true
+
+  additionalProperties:
+    type: object
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      function: true
+      groups: true
+      pins: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-strength: true
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+examples:
+  - |
+    // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
+
+    pinctrl {
+        compatible = "socionext,uniphier-ld20-pinctrl";
+
+        pinctrl_ether_rgmii: ether-rgmii {
+            groups = "ether_rgmii";
+            function = "ether_rgmii";
+
+            tx {
+                pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+                       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+                drive-strength = <9>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
new file mode 100644
index 0000000000..779b8ef0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
@@ -0,0 +1,83 @@
+* Spreadtrum Pin Controller
+
+The Spreadtrum pin controller are organized in 3 blocks (types).
+
+The first block comprises some global control registers, and each
+register contains several bit fields with one bit or several bits
+to configure for some global common configuration, such as domain
+pad driving level, system control select and so on ("domain pad
+driving level": One pin can output 3.0v or 1.8v, depending on the
+related domain pad driving selection, if the related domain pad
+select 3.0v, then the pin can output 3.0v. "system control" is used
+to choose one function (like: UART0) for which system, since we
+have several systems (AP/CP/CM4) on one SoC.).
+
+There are too much various configuration that we can not list all
+of them, so we can not make every Spreadtrum-special configuration
+as one generic configuration, and maybe it will add more strange
+global configuration in future. Then we add one "sprd,control" to
+set these various global control configuration, and we need use
+magic number for this property.
+
+Moreover we recognise every fields comprising one bit or several
+bits in one global control register as one pin, thus we should
+record every pin's bit offset, bit width and register offset to
+configure this field (pin).
+
+The second block comprises some common registers which have unified
+register definition, and each register described one pin is used
+to configure the pin sleep mode, function select and sleep related
+configuration.
+
+Now we have 4 systems for sleep mode on SC9860 SoC: AP system,
+PUBCP system, TGLDSP system and AGDSP system. And the pin sleep
+related configuration are:
+- input-enable
+- input-disable
+- output-high
+- output-low
+- bias-pull-up
+- bias-pull-down
+
+In some situation we need set the pin sleep mode and pin sleep related
+configuration, to set the pin sleep related configuration automatically
+by hardware when the system specified by sleep mode goes into deep
+sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP
+and set the pin sleep related configuration as "input-enable", which
+means when PUBCP system goes into deep sleep mode, this pin will be set
+input enable automatically.
+
+Moreover we can not use the "sleep" state, since some systems (like:
+PUBCP system) do not run linux kernel OS (only AP system run linux
+kernel on SC9860 platform), then we can not select "sleep" state
+when the PUBCP system goes into deep sleep mode. Thus we introduce
+"sprd,sleep-mode" property to set pin sleep mode.
+
+The last block comprises some misc registers which also have unified
+register definition, and each register described one pin is used to
+configure drive strength, pull up/down and so on. Especially for pull
+up, we have two kind pull up resistor: 20K and 4.7K.
+
+Required properties for Spreadtrum pin controller:
+- compatible: "sprd,<soc>-pinctrl"
+  Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs.
+- reg: The register address of pin controller device.
+- pins : An array of pin names.
+
+Optional properties:
+- function: Specified the function name.
+- drive-strength: Drive strength in mA.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Sleep mode selection.
+
+Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values.
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
new file mode 100644
index 0000000000..5a628333d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
@@ -0,0 +1,70 @@
+* Spreadtrum SC9860 Pin Controller
+
+Please refer to sprd,pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: Must be "sprd,sc9860-pinctrl".
+- reg: The register address of pin controller device.
+- pins : An array of strings, each string containing the name of a pin.
+
+Optional properties:
+- function: A string containing the name of the function, values must be
+  one of: "func1", "func2", "func3" and "func4".
+- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
+  12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor
+  is 20K and 4700 for pull-up resistor is 4.7K.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Choose the pin sleep mode, and supported values are:
+  AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP.
+
+Pin sleep mode definition:
+enum pin_sleep_mode {
+	AP_SLEEP = BIT(0),
+	PUBCP_SLEEP = BIT(1),
+	TGLDSP_SLEEP = BIT(2),
+	AGDSP_SLEEP = BIT(3),
+};
+
+Example:
+pin_controller: pinctrl@402a0000 {
+	compatible = "sprd,sc9860-pinctrl";
+	reg = <0x402a0000 0x10000>;
+
+	grp1: sd0 {
+		pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE";
+		sprd,control = <0x1>;
+	};
+
+	grp2: rfctl_33 {
+		pins = "SC9860_RFCTL33";
+		function = "func2";
+		sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>;
+		grp2_sleep_mode: rfctl_33_sleep {
+			pins = "SC9860_RFCTL33";
+			sleep-hardware-state;
+			output-low;
+		}
+	};
+
+	grp3: rfctl_misc_20 {
+		pins = "SC9860_RFCTL20_MISC";
+		drive-strength = <10>;
+		bias-pull-up = <4700>;
+		grp3_sleep_mode: rfctl_misc_sleep {
+			pins = "SC9860_RFCTL20_MISC";
+			sleep-hardware-state;
+			bias-pull-up;
+		}
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
new file mode 100644
index 0000000000..2120ef71a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) STMicroelectronics 2019.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/st,stm32-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 GPIO and Pin Mux/Config controller
+
+maintainers:
+  - Alexandre TORGUE <alexandre.torgue@foss.st.com>
+
+description: |
+  STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware
+  controller. It controls the input/output settings on the available pins and
+  also provides ability to multiplex and configure the output of various
+  on-chip controllers onto these pads.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f429-pinctrl
+      - st,stm32f469-pinctrl
+      - st,stm32f746-pinctrl
+      - st,stm32f769-pinctrl
+      - st,stm32h743-pinctrl
+      - st,stm32mp135-pinctrl
+      - st,stm32mp157-pinctrl
+      - st,stm32mp157-z-pinctrl
+      - st,stm32mp257-pinctrl
+      - st,stm32mp257-z-pinctrl
+
+  '#address-cells':
+    const: 1
+  '#size-cells':
+    const: 1
+
+  ranges: true
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+  hwlocks: true
+
+  interrupts:
+    maxItems: 1
+
+  st,syscfg:
+    description: Phandle+args to the syscon node which includes IRQ mux selection.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: syscon node which includes IRQ mux selection
+          - description: The offset of the IRQ mux selection register
+          - description: The field mask of IRQ mux, needed if different of 0xf
+
+  st,package:
+    description:
+      Indicates the SOC package used.
+      More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800]
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    additionalProperties: false
+    properties:
+      gpio-controller: true
+      '#gpio-cells':
+        const: 2
+      interrupt-controller: true
+      '#interrupt-cells':
+        const: 2
+
+      reg:
+        maxItems: 1
+      clocks:
+        maxItems: 1
+      resets:
+        maxItems: 1
+      gpio-line-names: true
+      gpio-ranges:
+        minItems: 1
+        maxItems: 16
+      ngpios:
+        description:
+          Number of available gpios in a bank.
+        minimum: 1
+        maximum: 16
+
+      st,bank-name:
+        description:
+          Should be a name string for this bank as specified in the datasheet.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum:
+          - GPIOA
+          - GPIOB
+          - GPIOC
+          - GPIOD
+          - GPIOE
+          - GPIOF
+          - GPIOG
+          - GPIOH
+          - GPIOI
+          - GPIOJ
+          - GPIOK
+          - GPIOZ
+
+      st,bank-ioport:
+        description:
+          Should correspond to the EXTI IOport selection (EXTI line used
+          to select GPIOs as interrupts).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 11
+
+    patternProperties:
+      "^(.+-hog(-[0-9]+)?)$":
+        type: object
+        required:
+          - gpio-hog
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - reg
+      - clocks
+      - st,bank-name
+
+  '-[0-9]*$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl group available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive, output high/low and output speed.
+        properties:
+          pinmux:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+              These defines are calculated as: ((port * 16 + line) << 8) | function
+              With:
+              - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11)
+              - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15)
+              - function: The function number, can be:
+              * 0 : GPIO
+              * 1 : Alternate Function 0
+              * 2 : Alternate Function 1
+              * 3 : Alternate Function 2
+              * ...
+              * 16 : Alternate Function 15
+              * 17 : Analog
+              To simplify the usage, macro is available to generate "pinmux" field.
+              This macro is available here:
+                - include/dt-bindings/pinctrl/stm32-pinfunc.h
+              Some examples of using macro:
+               /* GPIO A9 set as alernate function 2 */
+               ... {
+                          pinmux = <STM32_PINMUX('A', 9, AF2)>;
+               };
+               /* GPIO A9 set as GPIO  */
+               ... {
+                          pinmux = <STM32_PINMUX('A', 9, GPIO)>;
+               };
+               /* GPIO A9 set as analog */
+               ... {
+                          pinmux = <STM32_PINMUX('A', 9, ANALOG)>;
+               };
+
+          bias-disable:
+            type: boolean
+          bias-pull-down:
+            type: boolean
+          bias-pull-up:
+            type: boolean
+          drive-push-pull:
+            type: boolean
+          drive-open-drain:
+            type: boolean
+          output-low:
+            type: boolean
+          output-high:
+            type: boolean
+          slew-rate:
+            description: |
+              0: Low speed
+              1: Medium speed
+              2: Fast speed
+              3: High speed
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/stm32-pinfunc.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    //Example 1
+      pinctrl@40020000 {
+              #address-cells = <1>;
+              #size-cells = <1>;
+              compatible = "st,stm32f429-pinctrl";
+              ranges = <0 0x40020000 0x3000>;
+
+              gpioa: gpio@0 {
+                      gpio-controller;
+                      #gpio-cells = <2>;
+                      reg = <0x0 0x400>;
+                      resets = <&reset_ahb1 0>;
+                      clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+                      st,bank-name = "GPIOA";
+              };
+       };
+
+    //Example 2 (using gpio-ranges)
+      pinctrl@50020000 {
+              #address-cells = <1>;
+              #size-cells = <1>;
+              compatible = "st,stm32f429-pinctrl";
+              ranges = <0 0x50020000 0x3000>;
+
+              gpiob: gpio@1000 {
+                      gpio-controller;
+                      #gpio-cells = <2>;
+                      reg = <0x1000 0x400>;
+                      resets = <&reset_ahb1 0>;
+                      clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+                      st,bank-name = "GPIOB";
+                      gpio-ranges = <&pinctrl 0 0 16>;
+              };
+
+              gpioc: gpio@2000 {
+                      gpio-controller;
+                      #gpio-cells = <2>;
+                      reg = <0x2000 0x400>;
+                      resets = <&reset_ahb1 0>;
+                      clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+                      st,bank-name = "GPIOC";
+                      ngpios = <5>;
+                      gpio-ranges = <&pinctrl 0 16 3>,
+                                    <&pinctrl 14 30 2>;
+              };
+      };
+
+    //Example 3 pin groups
+      pinctrl {
+        usart1_pins_a: usart1-0 {
+                pins1 {
+                        pinmux = <STM32_PINMUX('A', 9, AF7)>;
+                        bias-disable;
+                        drive-push-pull;
+                        slew-rate = <0>;
+                };
+                pins2 {
+                        pinmux = <STM32_PINMUX('A', 10, AF7)>;
+                        bias-disable;
+                };
+        };
+    };
+
+    usart1 {
+                pinctrl-0 = <&usart1_pins_a>;
+                pinctrl-names = "default";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
new file mode 100644
index 0000000000..f3258f2fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Pin Controller
+
+description: |
+  Bindings for the JH7100 RISC-V SoC from StarFive Ltd.
+
+  Out of the SoC's many pins only the ones named PAD_GPIO[0] to PAD_GPIO[63]
+  and PAD_FUNC_SHARE[0] to PAD_FUNC_SHARE[141] can be multiplexed and have
+  configurable bias, drive strength, schmitt trigger etc. The SoC has an
+  interesting 2-layered approach to pin muxing best illustrated by the diagram
+  below.
+
+                          Signal group 0, 1, ... or 6
+                                 ___|___
+                                |       |
+    LCD output -----------------|       |
+    CMOS Camera interface ------|       |--- PAD_GPIO[0]
+    Ethernet PHY interface -----|  MUX  |--- PAD_GPIO[1]
+      ...                       |       |      ...
+                                |       |--- PAD_GPIO[63]
+     -------- GPIO0 ------------|       |
+    |  -------|-- GPIO1 --------|       |--- PAD_FUNC_SHARE[0]
+    | |       |   |             |       |--- PAD_FUNC_SHARE[1]
+    | |       |   |  ...        |       |       ...
+    | |       |   |             |       |--- PAD_FUNC_SHARE[141]
+    | |  -----|---|-- GPIO63 ---|       |
+    | | |     |   |   |          -------
+    UART0     UART1 --
+
+
+  The big MUX in the diagram only has 7 different ways of mapping peripherals
+  on the left to pins on the right. StarFive calls the 7 configurations "signal
+  groups".
+  However some peripherals have their I/O go through the 64 "GPIOs". The
+  diagram only shows UART0 and UART1, but this also includes a number of other
+  UARTs, I2Cs, SPIs, PWMs etc. All these peripherals are connected to all 64
+  GPIOs such that any GPIO can be set up to be controlled by any of the
+  peripherals.
+  Note that signal group 0 doesn't map any of the GPIOs to pins, and only
+  signal group 1 maps the GPIOs to the pins named PAD_GPIO[0] to PAD_GPIO[63].
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+  - Drew Fustini <drew@beagleboard.org>
+
+properties:
+  compatible:
+    const: starfive,jh7100-pinctrl
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: padctl
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The GPIO parent interrupt.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  starfive,signal-group:
+    description: |
+      Select one of the 7 signal groups. If this property is not set it
+      defaults to the configuration already chosen by the earlier boot stages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, bias, input enable/disable, input schmitt
+          trigger enable/disable, slew-rate and drive strength.
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+
+        properties:
+          pins:
+            description: |
+              The list of pin identifiers that properties in the node apply to.
+              This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
+              macros.
+              Either this or "pinmux" has to be specified, but not both.
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
+
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX macro.
+              Either this or "pins" has to be specified, but not both.
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
+
+          bias-disable: true
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            enum: [ 14, 21, 28, 35, 42, 49, 56, 63 ]
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 7
+
+          starfive,strong-pull-up:
+            description: enable strong pull-up.
+            type: boolean
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+    #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pinctrl@11910000 {
+            compatible = "starfive,jh7100-pinctrl";
+            reg = <0x0 0x11910000 0x0 0x10000>,
+                  <0x0 0x11858000 0x0 0x1000>;
+            reg-names = "gpio", "padctl";
+            clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+            resets = <&clkgen JH7100_RSTN_GPIO_APB>;
+            interrupts = <32>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            starfive,signal-group = <6>;
+
+            gmac_pins_default: gmac-0 {
+                gtxclk-pins {
+                    pins = <PAD_FUNC_SHARE(115)>;
+                    bias-pull-up;
+                    drive-strength = <35>;
+                    input-enable;
+                    input-schmitt-enable;
+                    slew-rate = <0>;
+                };
+                miitxclk-pins {
+                    pins = <PAD_FUNC_SHARE(116)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                tx-pins {
+                    pins = <PAD_FUNC_SHARE(117)>,
+                           <PAD_FUNC_SHARE(119)>,
+                           <PAD_FUNC_SHARE(120)>,
+                           <PAD_FUNC_SHARE(121)>,
+                           <PAD_FUNC_SHARE(122)>,
+                           <PAD_FUNC_SHARE(123)>,
+                           <PAD_FUNC_SHARE(124)>,
+                           <PAD_FUNC_SHARE(125)>,
+                           <PAD_FUNC_SHARE(126)>;
+                    bias-disable;
+                    drive-strength = <35>;
+                    input-disable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                rxclk-pins {
+                    pins = <PAD_FUNC_SHARE(127)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <6>;
+                };
+                rxer-pins {
+                    pins = <PAD_FUNC_SHARE(129)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-disable;
+                    slew-rate = <0>;
+                };
+                rx-pins {
+                    pins = <PAD_FUNC_SHARE(128)>,
+                           <PAD_FUNC_SHARE(130)>,
+                           <PAD_FUNC_SHARE(131)>,
+                           <PAD_FUNC_SHARE(132)>,
+                           <PAD_FUNC_SHARE(133)>,
+                           <PAD_FUNC_SHARE(134)>,
+                           <PAD_FUNC_SHARE(135)>,
+                           <PAD_FUNC_SHARE(136)>,
+                           <PAD_FUNC_SHARE(137)>,
+                           <PAD_FUNC_SHARE(138)>,
+                           <PAD_FUNC_SHARE(139)>,
+                           <PAD_FUNC_SHARE(140)>,
+                           <PAD_FUNC_SHARE(141)>;
+                    bias-pull-up;
+                    drive-strength = <14>;
+                    input-enable;
+                    input-schmitt-enable;
+                    slew-rate = <0>;
+                };
+            };
+
+            i2c0_pins_default: i2c0-0 {
+                i2c-pins {
+                    pinmux = <GPIOMUX(62, GPO_LOW,
+                              GPO_I2C0_PAD_SCK_OEN,
+                              GPI_I2C0_PAD_SCK_IN)>,
+                             <GPIOMUX(61, GPO_LOW,
+                              GPO_I2C0_PAD_SDA_OEN,
+                              GPI_I2C0_PAD_SDA_IN)>;
+                    bias-disable; /* external pull-up */
+                    input-enable;
+                    input-schmitt-enable;
+                };
+            };
+
+            uart3_pins_default: uart3-0 {
+                rx-pins {
+                    pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+                              GPI_UART3_PAD_SIN)>;
+                    bias-pull-up;
+                    input-enable;
+                    input-schmitt-enable;
+                };
+                tx-pins {
+                    pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+                              GPO_ENABLE, GPI_NONE)>;
+                    bias-disable;
+                    input-disable;
+                    input-schmitt-disable;
+                };
+            };
+        };
+
+        gmac {
+            pinctrl-0 = <&gmac_pins_default>;
+            pinctrl-names = "default";
+        };
+
+        i2c {
+            pinctrl-0 = <&i2c0_pins_default>;
+            pinctrl-names = "default";
+        };
+
+        uart3 {
+            pinctrl-0 = <&uart3_pins_default>;
+            pinctrl-names = "default";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
new file mode 100644
index 0000000000..b470901f5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 AON Pin Controller
+
+description: |
+  Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
+
+  Out of the SoC's many pins only the ones named PAD_RGPIO0 to PAD_RGPIO3
+  can be multiplexed and have configurable bias, drive strength,
+  schmitt trigger etc.
+  Some peripherals such as PWM have their I/O go through the 4 "GPIOs".
+
+maintainers:
+  - Jianlong Huang <jianlong.huang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-aon-pinctrl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, bias, input enable/disable, input schmitt
+          trigger enable/disable, slew-rate and drive strength.
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
+        additionalProperties: false
+
+        properties:
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX macro.
+
+          bias-disable: true
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            enum: [ 2, 4, 8, 12 ]
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@17020000 {
+        compatible = "starfive,jh7110-aon-pinctrl";
+        reg = <0x17020000 0x10000>;
+        resets = <&aoncrg 2>;
+        interrupts = <85>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        pwm-0 {
+            pwm-pins {
+                pinmux = <0xff030802>;
+                bias-disable;
+                drive-strength = <12>;
+                input-disable;
+                input-schmitt-disable;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
new file mode 100644
index 0000000000..222b9e240f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 SYS Pin Controller
+
+description: |
+  Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
+
+  Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63
+  can be multiplexed and have configurable bias, drive strength,
+  schmitt trigger etc.
+  Some peripherals have their I/O go through the 64 "GPIOs". This also
+  includes a number of other UARTs, I2Cs, SPIs, PWMs etc.
+  All these peripherals are connected to all 64 GPIOs such that
+  any GPIO can be set up to be controlled by any of the peripherals.
+
+maintainers:
+  - Jianlong Huang <jianlong.huang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-sys-pinctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '-pins$':
+        type: object
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, bias, input enable/disable, input schmitt
+          trigger enable/disable, slew-rate and drive strength.
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml
+          - $ref: /schemas/pinctrl/pinmux-node.yaml
+        additionalProperties: false
+
+        properties:
+          pinmux:
+            description: |
+              The list of GPIOs and their mux settings that properties in the
+              node apply to. This should be set using the GPIOMUX or PINMUX
+              macros.
+
+          bias-disable: true
+
+          bias-pull-up:
+            type: boolean
+
+          bias-pull-down:
+            type: boolean
+
+          drive-strength:
+            enum: [ 2, 4, 8, 12 ]
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          slew-rate:
+            maximum: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@13040000 {
+        compatible = "starfive,jh7110-sys-pinctrl";
+        reg = <0x13040000 0x10000>;
+        clocks = <&syscrg 112>;
+        resets = <&syscrg 2>;
+        interrupts = <86>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        uart0-0 {
+            tx-pins {
+                pinmux = <0xff140005>;
+                bias-disable;
+                drive-strength = <12>;
+                input-disable;
+                input-schmitt-disable;
+                slew-rate = <0>;
+            };
+
+            rx-pins {
+                pinmux = <0x0E000406>;
+                bias-pull-up;
+                drive-strength = <2>;
+                input-enable;
+                input-schmitt-enable;
+                slew-rate = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
new file mode 100644
index 0000000000..8769742043
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
@@ -0,0 +1,318 @@
+ST Ericsson abx500 pinmux controller
+
+Required properties:
+- compatible: "stericsson,ab8500-gpio",  "stericsson,ab8540-gpio",
+	      "stericsson,ab8505-gpio", "stericsson,ab9540-gpio",
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+ST Ericsson's pin configuration nodes use the generic pin multiplexing
+and pin configuration bindings, see pinctrl-bindings.txt
+
+Example board file extract:
+
+&pinctrl_abx500 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sysclkreq2_default_mode>, <&sysclkreq3_default_mode>, <&gpio3_default_mode>, <&sysclkreq6_default_mode>, <&pwmout1_default_mode>, <&pwmout2_default_mode>, <&pwmout3_default_mode>, <&adi1_default_mode>, <&dmic12_default_mode>, <&dmic34_default_mode>, <&dmic56_default_mode>, <&sysclkreq5_default_mode>, <&batremn_default_mode>, <&service_default_mode>, <&pwrctrl0_default_mode>, <&pwrctrl1_default_mode>, <&pwmextvibra1_default_mode>, <&pwmextvibra2_default_mode>, <&gpio51_default_mode>, <&gpio52_default_mode>, <&gpio53_default_mode>, <&gpio54_default_mode>, <&pdmclkdat_default_mode>;
+
+	sysclkreq2 {
+		sysclkreq2_default_mode: sysclkreq2_default {
+			default_mux {
+				function = "sysclkreq";
+				groups = "sysclkreq2_d_1";
+			};
+			default_cfg {
+				pins = "GPIO1";
+				bias-disable;
+			};
+		};
+	};
+	sysclkreq3 {
+		sysclkreq3_default_mode: sysclkreq3_default {
+			default_mux {
+				function = "sysclkreq";
+				groups = "sysclkreq3_d_1";
+			};
+			default_cfg {
+				pins = "GPIO2";
+				output-low;
+			};
+		};
+	};
+	gpio3 {
+		gpio3_default_mode: gpio3_default {
+			default_mux {
+				function = "gpio";
+				groups = "gpio3_a_1";
+			};
+			default_cfg {
+				pins = "GPIO3";
+				output-low;
+			};
+		};
+	};
+	sysclkreq6 {
+		sysclkreq6_default_mode: sysclkreq6_default {
+			default_mux {
+				function = "sysclkreq";
+				groups = "sysclkreq6_d_1";
+			};
+			default_cfg {
+				pins = "GPIO4";
+				bias-disable;
+			};
+		};
+	};
+	pwmout1 {
+		pwmout1_default_mode: pwmout1_default {
+			default_mux {
+				function = "pwmout";
+				groups = "pwmout1_d_1";
+			};
+			default_cfg {
+				pins = "GPIO14";
+				output-low;
+			};
+		};
+	};
+	pwmout2 {
+		pwmout2_default_mode: pwmout2_default {
+			pwmout2_default_mux {
+				function = "pwmout";
+				groups = "pwmout2_d_1";
+			};
+			pwmout2_default_cfg {
+				pins = "GPIO15";
+				output-low;
+			};
+		};
+	};
+	pwmout3 {
+		pwmout3_default_mode: pwmout3_default {
+			pwmout3_default_mux {
+				function = "pwmout";
+				groups = "pwmout3_d_1";
+			};
+			pwmout3_default_cfg {
+				pins = "GPIO16";
+				output-low;
+			};
+		};
+	};
+	adi1 {
+
+		adi1_default_mode: adi1_default {
+			adi1_default_mux {
+				function = "adi1";
+				groups = "adi1_d_1";
+			};
+			adi1_default_cfg1 {
+				pins = "GPIO17","GPIO19","GPIO20";
+				bias-disable;
+			};
+			adi1_default_cfg2 {
+				pins = "GPIO18";
+				output-low;
+			};
+		};
+	};
+	dmic12 {
+		dmic12_default_mode: dmic12_default {
+			dmic12_default_mux {
+				function = "dmic";
+				groups = "dmic12_d_1";
+			};
+			dmic12_default_cfg1 {
+				pins = "GPIO27";
+				output-low;
+			};
+			dmic12_default_cfg2 {
+				pins = "GPIO28";
+				bias-disable;
+			};
+		};
+	};
+	dmic34 {
+		dmic34_default_mode: dmic34_default {
+			dmic34_default_mux {
+				function = "dmic";
+				groups = "dmic34_d_1";
+			};
+			dmic34_default_cfg1 {
+				pins = "GPIO29";
+				output-low;
+			};
+			dmic34_default_cfg2 {
+				pins = "GPIO30";
+				bias-disable;{
+
+			};
+		};
+	};
+	dmic56 {
+		dmic56_default_mode: dmic56_default {
+			dmic56_default_mux {
+				function = "dmic";
+				groups = "dmic56_d_1";
+			};
+			dmic56_default_cfg1 {
+				pins = "GPIO31";
+				output-low;
+			};
+			dmic56_default_cfg2 {
+				pins = "GPIO32";
+				bias-disable;
+			};
+		};
+	};
+	sysclkreq5 {
+		sysclkreq5_default_mode: sysclkreq5_default {
+			sysclkreq5_default_mux {
+				function = "sysclkreq";
+				groups = "sysclkreq5_d_1";
+			};
+			sysclkreq5_default_cfg {
+				pins = "GPIO42";
+				output-low;
+			};
+		};
+	};
+	batremn {
+		batremn_default_mode: batremn_default {
+			batremn_default_mux {
+				function = "batremn";
+				groups = "batremn_d_1";
+			};
+			batremn_default_cfg {
+				pins = "GPIO43";
+				bias-disable;
+			};
+		};
+	};
+	service {
+		service_default_mode: service_default {
+			service_default_mux {
+				function = "service";
+				groups = "service_d_1";
+			};
+			service_default_cfg {
+				pins = "GPIO44";
+				bias-disable;
+			};
+		};
+	};
+	pwrctrl0 {
+		pwrctrl0_default_mux: pwrctrl0_mux {
+			pwrctrl0_default_mux {
+				function = "pwrctrl";
+				groups = "pwrctrl0_d_1";
+			};
+		};
+		pwrctrl0_default_mode: pwrctrl0_default {
+			pwrctrl0_default_cfg {
+				pins = "GPIO45";
+				bias-disable;
+			};
+		};
+	};
+	pwrctrl1 {
+		pwrctrl1_default_mux: pwrctrl1_mux {
+			pwrctrl1_default_mux {
+				function = "pwrctrl";
+				groups = "pwrctrl1_d_1";
+			};
+		};
+		pwrctrl1_default_mode: pwrctrl1_default {
+			pwrctrl1_default_cfg {
+				pins = "GPIO46";
+				bias-disable;
+			};
+		};
+	};
+	pwmextvibra1 {
+		pwmextvibra1_default_mode: pwmextvibra1_default {
+			pwmextvibra1_default_mux {
+				function = "pwmextvibra";
+				groups = "pwmextvibra1_d_1";
+			};
+			pwmextvibra1_default_cfg {
+				pins = "GPIO47";
+				bias-disable;
+			};
+		};
+	};
+	pwmextvibra2 {
+		pwmextvibra2_default_mode: pwmextvibra2_default {
+			pwmextvibra2_default_mux {
+				function = "pwmextvibra";
+				groups = "pwmextvibra2_d_1";
+			};
+			pwmextvibra1_default_cfg {
+				pins = "GPIO48";
+				bias-disable;
+			};
+		};
+	};
+	gpio51 {
+		gpio51_default_mode: gpio51_default {
+				gpio51_default_mux {
+				function = "gpio";
+				groups = "gpio51_a_1";
+			};
+			gpio51_default_cfg {
+				pins = "GPIO51";
+				output-low;
+			};
+		};
+	};
+	gpio52 {
+		gpio52_default_mode: gpio52_default {
+			gpio52_default_mux {
+				function = "gpio";
+				groups = "gpio52_a_1";
+			};
+			gpio52_default_cfg {
+				pins = "GPIO52";
+				bias-pull-down;
+			};
+		};
+	};
+	gpio53 {
+		gpio53_default_mode: gpio53_default {
+			gpio53_default_mux {
+				function = "gpio";
+				groups = "gpio53_a_1";
+			};
+			gpio53_default_cfg {
+				pins = "GPIO53";
+				bias-pull-down;
+			};
+		};
+	};
+	gpio54 {
+		gpio54_default_mode: gpio54_default {
+			gpio54_default_mux {
+				function = "gpio";
+				groups = "gpio54_a_1";
+			};
+			gpio54_default_cfg {
+				pins = "GPIO54";
+				output-low;
+			};
+		};
+	};
+	pdmclkdat {
+		pdmclkdat_default_mode: pdmclkdat_default {
+			pdmclkdat_default_mux {
+				function = "pdm";
+				groups = "pdmclkdat_d_1";
+			};
+			pdmclkdat_default_cfg {
+				pins = "GPIO55", "GPIO56";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
new file mode 100644
index 0000000000..2213802435
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -0,0 +1,148 @@
+ST Ericsson Nomadik pinmux controller
+
+Required properties:
+- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
+              "stericsson,stn8815-pinctrl"
+- nomadik-gpio-chips: array of phandles to the corresponding GPIO chips
+              (these have the register ranges used by the pin controller).
+- prcm: phandle to the PRCMU managing the back end of this pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as input, output, pull up, pull down...
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content. The subnodes use the generic
+pin multiplexing node layout from the standard pin control bindings
+(see pinctrl-bindings.txt):
+
+Required pin multiplexing subnode properties:
+- function: A string containing the name of the function to mux to the
+  pin or group.
+- groups : An array of strings. Each string contains the name of a pin
+  group that will be combined with the function to form a multiplexing
+  set-up.
+
+Required pin configuration subnode properties:
+- pins: A string array describing the pins affected by the configuration
+  in the node.
+- ste,config: Handle of pin configuration node
+  (e.g. ste,config = <&slpm_in_wkup_pdis>)
+
+- ste,input : <0/1/2>
+	0: input with no pull
+	1: input with pull up,
+	2: input with pull down,
+
+- ste,output: <0/1/2>
+	0: output low,
+	1: output high,
+	2: output (value is not specified).
+
+- ste,sleep: <0/1>
+	0: sleep mode disable,
+	1: sleep mode enable.
+
+- ste,sleep-input: <0/1/2/3>
+	0: sleep input with no pull,
+	1: sleep input with pull up,
+	2: sleep input with pull down.
+	3: sleep input and keep last input configuration (no pull, pull up or pull down).
+
+- ste,sleep-output: <0/1/2>
+	0: sleep output low,
+	1: sleep output high,
+	2: sleep output (value is not specified).
+
+- ste,sleep-gpio: <0/1>
+	0: disable sleep gpio mode,
+	1: enable sleep gpio mode.
+
+- ste,sleep-wakeup: <0/1>
+	0: wake-up detection enabled,
+	1: wake-up detection disabled.
+
+- ste,sleep-pull-disable: <0/1>
+	0: GPIO pull-up or pull-down resistor is enabled, when pin is an input,
+	1: GPIO pull-up and pull-down resistor are disabled.
+
+Example board file extract:
+
+	pinctrl@80157000 {
+		compatible = "stericsson,db8500-pinctrl";
+		nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
+		prcm = <&prcmu>;
+
+		pinctrl-names = "default";
+
+		slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+			ste,sleep = <1>;
+			ste,sleep-input = <3>;
+			ste,sleep-wakeup = <1>;
+			ste,sleep-pull-disable = <0>;
+		};
+
+		slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+			ste,sleep = <1>;
+			ste,sleep-output = <1>;
+			ste,sleep-wakeup = <1>;
+			ste,sleep-pull-disable = <0>;
+		};
+
+		slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+			ste,sleep = <1>;
+			ste,sleep-output = <2>;
+			ste,sleep-wakeup = <1>;
+			ste,sleep-pull-disable = <0>;
+		};
+
+		uart0 {
+			uart0_default_mux: uart0_mux {
+				u0_default_mux {
+					function = "u0";
+					pins = "u0_a_1";
+				};
+			};
+			uart0_default_mode: uart0_default {
+				uart0_default_cfg1 {
+					pins = "GPIO0", "GPIO2";
+					ste,input = <1>;
+				};
+
+				uart0_default_cfg2 {
+					pins = "GPIO1", "GPIO3";
+					ste,output = <1>;
+				};
+			};
+			uart0_sleep_mode: uart0_sleep {
+				uart0_sleep_cfg1 {
+					pins = "GPIO0", "GPIO2";
+					ste,config = <&slpm_in_wkup_pdis>;
+				};
+				uart0_sleep_cfg2 {
+					pins = "GPIO1";
+					ste,config = <&slpm_out_hi_wkup_pdis>;
+				};
+				uart0_sleep_cfg3 {
+					pins = "GPIO3";
+					ste,config = <&slpm_out_wkup_pdis>;
+				};
+			};
+		};
+	};
+
+	uart@80120000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x80120000 0x1000>;
+		interrupts = <0 11 0x4>;
+
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+		pinctrl-1 = <&uart0_sleep_mode>;
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
new file mode 100644
index 0000000000..94b868c7ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -0,0 +1,377 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Pin Controller
+
+maintainers:
+  - Dvorkin Dmitry <dvorkin@tibbo.com>
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  The Sunplus SP7021 pin controller is used to control SoC pins. Please
+  refer to pinctrl-bindings.txt in this directory for details of the common
+  pinctrl bindings used by client devices.
+
+  SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
+  are multiplexed with some special function pins. SP7021 has 3 types of
+  special function pins:
+
+  (1) function-group pins:
+      Ex 1 (SPI-NOR flash):
+        If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
+        will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
+        and 81 will be pins of SPI-NOR flash.
+
+      Ex 2 (UART_0):
+        If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
+        RX pins of UART_0 (UART channel 0).
+
+      Ex 3 (eMMC):
+        If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
+        78, 79, 80, 81 will be pins of an eMMC device.
+
+      Properties "function" and "groups" are used to select function-group
+      pins.
+
+  (2) fully pin-mux (like phone exchange mux) pins:
+      GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
+      SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
+      can be routed to any pins of fully pin-mux pins.
+
+      Ex 1 (UART channel 1):
+        If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
+        routed to GPIO 10 (3 - 1 + 8 = 10).
+        If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
+        routed to GPIO 11 (4 - 1 + 8 = 11).
+        If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
+        be routed to GPIO 12 (5 - 1 + 8 = 12).
+        If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
+        be routed to GPIO 13 (6 - 1 + 8 = 13).
+
+      Ex 2 (I2C channel 0):
+        If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
+        be routed to GPIO 27 (20 - 1 + 8 = 27).
+        If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
+        will be routed to GPIO 28 (21 - 1 + 9 = 28).
+
+      Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
+      routed to any of 64 'fully pin-mux' pins.
+
+  (3) I/O processor pins
+      SP7021 has a built-in I/O processor.
+      Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
+
+  Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
+  "I/O processor pins" and "digital GPIO" pins.
+
+  The device node of pin controller of Sunplus SP7021 has following
+  properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-pctl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  reg:
+    items:
+      - description: the MOON2 registers
+      - description: the GPIOXT registers
+      - description: the FIRST registers
+      - description: the MOON1 registers
+
+  reg-names:
+    items:
+      - const: moon2
+      - const: gpioxt
+      - const: first
+      - const: moon1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pins or function-pins group available on the machine. Each subnode
+      will list the pins it needs, and how they should be configured.
+
+      Pinctrl node's client devices use subnodes for desired pin
+      configuration. Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
+
+    properties:
+      sunplus,pins:
+        description: |
+          Define 'sunplus,pins' which are used by pinctrl node's client
+          device.
+
+          It consists of one or more integers which represents the config
+          setting for corresponding pin. Each integer defines a individual
+          pin in which:
+
+          Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
+          Bit 23~16: defines types: (1) fully pin-mux pins
+                                    (2) IO processor pins
+                                    (3) digital GPIO pins
+          Bit 15~8:  defines pins of peripherals (which are defined in
+                     'include/dt-binging/pinctrl/sppctl.h').
+          Bit 7~0:   defines types or initial-state of digital GPIO pins.
+
+          Please use macro SPPCTL_IOPAD to define the integers for pins.
+
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      function:
+        description: |
+          Define pin-function which is used by pinctrl node's client device.
+          The name should be one of string in the following enumeration.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
+                UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
+
+      groups:
+        description: |
+          Define pin-group in a specified pin-function.
+          The name should be one of string in the following enumeration.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
+                SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
+                HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
+
+      sunplus,zerofunc:
+        description: |
+          This is a vendor specific property. It is used to disable pins
+          which are not used by pinctrl node's client device.
+          Some pins may be enabled by boot-loader. We can use this
+          property to disable them.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_FLASH
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_FLASH1
+                - SPI_FLASH2
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_FLASH_4BIT
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_FLASH_4BIT1
+                - SPI_FLASH_4BIT2
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_NAND
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_NAND
+      - if:
+          properties:
+            function:
+              enum:
+                - CARD0_EMMC
+        then:
+          properties:
+            groups:
+              enum:
+                - CARD0_EMMC
+      - if:
+          properties:
+            function:
+              enum:
+                - SD_CARD
+        then:
+          properties:
+            groups:
+              enum:
+                - SD_CARD
+      - if:
+          properties:
+            function:
+              enum:
+                - UA0
+        then:
+          properties:
+            groups:
+              enum:
+                - UA0
+      - if:
+          properties:
+            function:
+              enum:
+                - FPGA_IFX
+        then:
+          properties:
+            groups:
+              enum:
+                - FPGA_IFX
+      - if:
+          properties:
+            function:
+              enum:
+                - HDMI_TX
+        then:
+          properties:
+            groups:
+              enum:
+                - HDMI_TX1
+                - HDMI_TX2
+                - HDMI_TX3
+      - if:
+          properties:
+            function:
+              enum:
+                - LCDIF
+        then:
+          properties:
+            groups:
+              enum:
+                - LCDIF
+      - if:
+          properties:
+            function:
+              enum:
+                - USB0_OTG
+        then:
+          properties:
+            groups:
+              enum:
+                - USB0_OTG
+      - if:
+          properties:
+            function:
+              enum:
+                - USB1_OTG
+        then:
+          properties:
+            groups:
+              enum:
+                - USB1_OTG
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+  - resets
+
+additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/sppctl-sp7021.h>
+
+    pinctrl@9c000100 {
+        compatible = "sunplus,sp7021-pctl";
+        reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
+              <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
+        reg-names = "moon2", "gpioxt", "first", "moon1";
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clkc 0x83>;
+        resets = <&rstc 0x73>;
+
+        uart0-pins {
+            function = "UA0";
+            groups = "UA0";
+        };
+
+        spinand0-pins {
+            function = "SPI_NAND";
+            groups = "SPI_NAND";
+        };
+
+        uart1-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+                SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+            >;
+        };
+
+        uart2-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+                SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+                SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
+                SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
+            >;
+        };
+
+        emmc-pins {
+            function = "CARD0_EMMC";
+            groups = "CARD0_EMMC";
+        };
+
+        sdcard-pins {
+            function = "SD_CARD";
+            groups = "SD_CARD";
+            sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+        };
+
+        hdmi_A_tx1-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX1";
+        };
+        hdmi_A_tx2-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX2";
+        };
+        hdmi_A_tx3-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX3";
+        };
+
+        ethernet-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+                SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+                SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+                SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+                SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+                SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+                SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+                SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+                SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+            >;
+            sunplus,zerofunc = <
+                MUXF_L2SW_LED_FLASH0
+                MUXF_L2SW_LED_ON0
+                MUXF_L2SW_P0_MAC_RMII_RXER
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt b/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
new file mode 100644
index 0000000000..7f2980567c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
@@ -0,0 +1,55 @@
+* Pin configuration for TI DA850/OMAP-L138/AM18x
+
+These SoCs have a separate controller for setting bias (internal pullup/down).
+Bias can only be selected for groups rather than individual pins.
+
+Required Properties:
+
+  - compatible: Must be "ti,da850-pupd"
+  - reg: Base address and length of the memory resource used by the pullup/down
+    controller hardware module.
+
+The controller node also acts as a container for pin group configuration nodes.
+The names of these groups are ignored.
+
+Pin Group Node Properties:
+
+- groups: An array of strings, each string containing the name of a pin group.
+          Valid names are "cp0".."cp31".
+
+The pin configuration parameters use the generic pinconf bindings defined in
+pinctrl-bindings.txt in this directory. The supported parameters are
+bias-disable, bias-pull-up, bias-pull-down.
+
+
+Example
+-------
+
+In common dtsi file:
+
+	pinconf: pin-controller@22c00c {
+		compatible = "ti,da850-pupd";
+		reg = <0x22c00c 0x8>;
+	};
+
+In board-specific file:
+
+	&pinconf {
+		pinctrl-0 = <&pinconf_bias_groups>;
+		pinctrl-names = "default";
+
+		pinconf_bias_groups: bias-groups {
+			pull-up {
+				groups = "cp30", "cp31";
+				bias-pull-up;
+			};
+			pull-down {
+				groups = "cp29", "cp28";
+				bias-pull-down;
+			};
+			disable {
+				groups = "cp27", "cp26";
+				bias-disable;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt b/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt
new file mode 100644
index 0000000000..c3ed1232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt
@@ -0,0 +1,47 @@
+* Pin configuration for TI IODELAY controller
+
+TI dra7 based SoCs such as am57xx have a controller for setting the IO delay
+for each pin. For most part the IO delay values are programmed by the bootloader,
+but some pins need to be configured dynamically by the kernel such as the
+MMC pins.
+
+Required Properties:
+
+  - compatible: Must be "ti,dra7-iodelay"
+  - reg: Base address and length of the memory resource used
+  - #address-cells: Number of address cells
+  - #size-cells: Size of cells
+  - #pinctrl-cells: Number of pinctrl cells, must be 2. See also
+    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example
+-------
+
+In the SoC specific dtsi file:
+
+	dra7_iodelay_core: padconf@4844a000 {
+		compatible = "ti,dra7-iodelay";
+		reg = <0x4844a000 0x0d1c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#pinctrl-cells = <2>;
+	};
+
+In board-specific file:
+
+&dra7_iodelay_core {
+	mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf {
+		pinctrl-pin-array = <
+		0x18c A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A19_IN */
+		0x1a4 A_DELAY_PS(265) G_DELAY_PS(360)	/* CFG_GPMC_A20_IN */
+		0x1b0 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_IN */
+		0x1bc A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A22_IN */
+		0x1c8 A_DELAY_PS(287) G_DELAY_PS(420)	/* CFG_GPMC_A23_IN */
+		0x1d4 A_DELAY_PS(144) G_DELAY_PS(240)	/* CFG_GPMC_A24_IN */
+		0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+		0x1ec A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_IN */
+		0x1f8 A_DELAY_PS(120) G_DELAY_PS(180)	/* CFG_GPMC_A27_IN */
+		0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+		>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
new file mode 100644
index 0000000000..19d47fd414
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/toshiba,visconti-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti TMPV770x pin mux/config controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshiba's Visconti ARM SoC a pin mux/config controller.
+
+properties:
+  compatible:
+    enum:
+      - toshiba,tmpv7708-pinctrl
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pinctrl groups available on the machine. Each subnode will list the
+      pins it needs, and how they should be configured, with regard to muxer
+      configuration, pullups, drive strength.
+    $ref: pinmux-node.yaml
+    additionalProperties: false
+
+    properties:
+      function:
+        description:
+          Function to mux.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
+               spi0, spi1, spi2, spi3, spi4, spi5, spi6,
+               uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
+
+      groups:
+        description:
+          Name of the pin group to use for the functions.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+               i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+               spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+               spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+               uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+               pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+               pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+               pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+               pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+               pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+               pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 16, 24, 32]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-up: true
+
+      bias-pull-down: true
+
+      bias-disable: true
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmux: pinmux@24190000 {
+            compatible = "toshiba,tmpv7708-pinctrl";
+            reg = <0 0x24190000 0 0x10000>;
+
+            spi0_pins: spi0-pins {
+                function = "spi0";
+                groups = "spi0_grp";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
new file mode 100644
index 0000000000..b85f9e36ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Pinctrl
+
+maintainers:
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  Zynq's pin configuration nodes act as a container for an arbitrary number of
+  subnodes. Each of these subnodes represents some desired configuration for a
+  pin, a group, or a list of pins or groups. This configuration can include the
+  mux function to select on those pin(s)/group(s), and various pin configuration
+  parameters, such as pull-up, slew rate, etc.
+
+  Each configuration node can consist of multiple nodes describing the pinmux and
+  pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+  The name of each subnode is not important; all subnodes should be enumerated
+  and processed purely based on their content.
+
+properties:
+  compatible:
+    const: xlnx,zynq-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the SLCR space.
+    maxItems: 1
+
+  syscon:
+    description:
+      phandle to the SLCR.
+
+patternProperties:
+  '^(.*-)?(default|gpio)$':
+    type: object
+    patternProperties:
+      '^mux':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin muxes,
+          which in turn use below standard properties.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of groups to select (either this or "pins" must be
+              specified), available groups for this subnode.
+            items:
+              enum: [ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp,
+                     mdio1_0_grp, qspi0_0_grp, qspi1_0_grp, qspi_fbclk,
+                     qspi_cs1_grp, spi0_0_grp, spi0_1_grp, spi0_2_grp,
+                     spi0_0_ss0, spi0_0_ss1, spi0_0_ss2, spi0_1_ss0,
+                     spi0_1_ss1, spi0_1_ss2, spi0_2_ss0, spi0_2_ss1,
+                     spi0_2_ss2, spi1_0_grp, spi1_1_grp, spi1_2_grp,
+                     spi1_3_grp, spi1_0_ss0, spi1_0_ss1, spi1_0_ss2,
+                     spi1_1_ss0, spi1_1_ss1, spi1_1_ss2, spi1_2_ss0,
+                     spi1_2_ss1, spi1_2_ss2, spi1_3_ss0, spi1_3_ss1,
+                     spi1_3_ss2, sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+                     sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, sdio1_3_grp,
+                     sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+                     sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp,
+                     smc0_nor_addr25_grp, smc0_nand, can0_0_grp, can0_1_grp,
+                     can0_2_grp, can0_3_grp, can0_4_grp, can0_5_grp,
+                     can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp,
+                     can0_10_grp, can1_0_grp, can1_1_grp, can1_2_grp,
+                     can1_3_grp, can1_4_grp, can1_5_grp, can1_6_grp,
+                     can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp,
+                     can1_11_grp, uart0_0_grp, uart0_1_grp, uart0_2_grp,
+                     uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp,
+                     uart0_7_grp, uart0_8_grp, uart0_9_grp, uart0_10_grp,
+                     uart1_0_grp, uart1_1_grp, uart1_2_grp, uart1_3_grp,
+                     uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp,
+                     uart1_8_grp, uart1_9_grp, uart1_10_grp, uart1_11_grp,
+                     i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp,
+                     i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+                     i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, i2c1_0_grp,
+                     i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, i2c1_4_grp,
+                     i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp,
+                     i2c1_9_grp, i2c1_10_grp, ttc0_0_grp, ttc0_1_grp,
+                     ttc0_2_grp, ttc1_0_grp, ttc1_1_grp, ttc1_2_grp,
+                     swdt0_0_grp, swdt0_1_grp, swdt0_2_grp, swdt0_3_grp,
+                     swdt0_4_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp,
+                     gpio0_3_grp, gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+                     gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, gpio0_10_grp,
+                     gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp,
+                     gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+                     gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, gpio0_22_grp,
+                     gpio0_23_grp, gpio0_24_grp, gpio0_25_grp, gpio0_26_grp,
+                     gpio0_27_grp, gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+                     gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, gpio0_34_grp,
+                     gpio0_35_grp, gpio0_36_grp, gpio0_37_grp, gpio0_38_grp,
+                     gpio0_39_grp, gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+                     gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, gpio0_46_grp,
+                     gpio0_47_grp, gpio0_48_grp, gpio0_49_grp, gpio0_50_grp,
+                     gpio0_51_grp, gpio0_52_grp, gpio0_53_grp, usb0_0_grp,
+                     usb1_0_grp]
+            maxItems: 54
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given pin groups.
+            enum: [ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk,
+                   qspi_cs1, spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc,
+                   sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+                   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0,
+                   can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0,
+                   usb0, usb1]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^conf':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin configurations,
+          which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of pin groups as mentioned above.
+
+          pins:
+            description:
+              List of pin names to select in this subnode.
+            items:
+              pattern: '^MIO([0-9]|[1-4][0-9]|5[0-3])$'
+            maxItems: 54
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          bias-disable: true
+
+          bias-high-impedance: true
+
+          low-power-enable: true
+
+          low-power-disable: true
+
+          slew-rate:
+            enum: [0, 1]
+
+          power-source:
+            enum: [1, 2, 3, 4]
+
+        oneOf:
+          - required: [ groups ]
+          - required: [ pins ]
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-zynq.h>
+    pinctrl0: pinctrl@700 {
+       compatible = "xlnx,zynq-pinctrl";
+       reg = <0x700 0x200>;
+       syscon = <&slcr>;
+
+       pinctrl_uart1_default: uart1-default {
+           mux {
+               groups = "uart1_10_grp";
+               function = "uart1";
+           };
+
+           conf {
+               groups = "uart1_10_grp";
+               slew-rate = <0>;
+               power-source = <IO_STANDARD_LVCMOS18>;
+           };
+
+           conf-rx {
+               pins = "MIO49";
+               bias-high-impedance;
+           };
+
+           conf-tx {
+               pins = "MIO48";
+               bias-disable;
+           };
+       };
+    };
+
+    uart1 {
+         pinctrl-names = "default";
+         pinctrl-0 = <&pinctrl_uart1_default>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
new file mode 100644
index 0000000000..01b6f2b578
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -0,0 +1,342 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP Pinctrl
+
+maintainers:
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  Please refer to pinctrl-bindings.txt in this directory for details of the
+  common pinctrl bindings used by client devices, including the meaning of the
+  phrase "pin configuration node".
+
+  ZynqMP's pin configuration nodes act as a container for an arbitrary number of
+  subnodes. Each of these subnodes represents some desired configuration for a
+  pin, a group, or a list of pins or groups. This configuration can include the
+  mux function to select on those pin(s)/group(s), and various pin configuration
+  parameters, such as pull-up, slew rate, etc.
+
+  Each configuration node can consist of multiple nodes describing the pinmux and
+  pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+  The name of each subnode is not important; all subnodes should be enumerated
+  and processed purely based on their content.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-pinctrl
+
+patternProperties:
+  '^(.*-)?(default|gpio)$':
+    type: object
+    patternProperties:
+      '^mux':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin muxes,
+          which in turn use below standard properties.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of groups to select (either this or "pins" must be
+              specified), available groups for this subnode.
+            items:
+              enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
+                     ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
+                     gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
+                     mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
+                     qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
+                     spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
+                     spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
+                     spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
+                     spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
+                     spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
+                     spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
+                     spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
+                     spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
+                     spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
+                     spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
+                     spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
+                     spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
+                     spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
+                     spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
+                     spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
+                     spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
+                     sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+                     sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
+                     sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
+                     sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
+                     sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
+                     sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
+                     sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
+                     sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
+                     sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
+                     sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
+                     sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
+                     sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
+                     sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
+                     sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
+                     sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
+                     sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
+                     sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
+                     sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
+                     sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
+                     sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
+                     sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
+                     sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
+                     nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
+                     nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
+                     can0_1_grp, can0_2_grp, can0_3_grp,
+                     can0_4_grp, can0_5_grp, can0_6_grp,
+                     can0_7_grp, can0_8_grp, can0_9_grp,
+                     can0_10_grp, can0_11_grp, can0_12_grp,
+                     can0_13_grp, can0_14_grp, can0_15_grp,
+                     can0_16_grp, can0_17_grp, can0_18_grp,
+                     can1_0_grp, can1_1_grp, can1_2_grp,
+                     can1_3_grp, can1_4_grp, can1_5_grp,
+                     can1_6_grp, can1_7_grp, can1_8_grp,
+                     can1_9_grp, can1_10_grp, can1_11_grp,
+                     can1_12_grp, can1_13_grp, can1_14_grp,
+                     can1_15_grp, can1_16_grp, can1_17_grp,
+                     can1_18_grp, can1_19_grp, uart0_0_grp,
+                     uart0_1_grp, uart0_2_grp, uart0_3_grp,
+                     uart0_4_grp, uart0_5_grp, uart0_6_grp,
+                     uart0_7_grp, uart0_8_grp, uart0_9_grp,
+                     uart0_10_grp, uart0_11_grp, uart0_12_grp,
+                     uart0_13_grp, uart0_14_grp, uart0_15_grp,
+                     uart0_16_grp, uart0_17_grp, uart0_18_grp,
+                     uart1_0_grp, uart1_1_grp, uart1_2_grp,
+                     uart1_3_grp, uart1_4_grp, uart1_5_grp,
+                     uart1_6_grp, uart1_7_grp, uart1_8_grp,
+                     uart1_9_grp, uart1_10_grp, uart1_11_grp,
+                     uart1_12_grp, uart1_13_grp, uart1_14_grp,
+                     uart1_15_grp, uart1_16_grp, uart1_17_grp,
+                     uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
+                     i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
+                     i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+                     i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
+                     i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
+                     i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
+                     i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
+                     i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
+                     i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
+                     i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
+                     i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
+                     i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
+                     i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
+                     i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
+                     ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
+                     ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
+                     ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
+                     ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
+                     ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
+                     ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
+                     ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
+                     ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
+                     ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
+                     ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
+                     ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
+                     ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
+                     ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
+                     ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
+                     ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
+                     ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
+                     ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
+                     ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
+                     ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
+                     ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
+                     ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
+                     ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
+                     ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
+                     ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
+                     swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
+                     swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
+                     swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
+                     swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
+                     swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
+                     swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
+                     swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
+                     swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
+                     swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
+                     swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
+                     swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
+                     swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
+                     swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
+                     swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
+                     swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
+                     swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
+                     swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
+                     gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
+                     gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+                     gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
+                     gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
+                     gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
+                     gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+                     gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
+                     gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
+                     gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
+                     gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+                     gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
+                     gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
+                     gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
+                     gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+                     gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
+                     gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
+                     gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
+                     gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
+                     gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
+                     gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
+                     gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
+                     gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
+                     gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
+                     gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
+                     gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
+                     gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
+                     usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
+                     pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
+                     pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
+                     pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
+                     pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
+                     pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
+                     pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
+                     csu0_0_grp, csu0_1_grp, csu0_2_grp,
+                     csu0_3_grp, csu0_4_grp, csu0_5_grp,
+                     csu0_6_grp, csu0_7_grp, csu0_8_grp,
+                     csu0_9_grp, csu0_10_grp, csu0_11_grp,
+                     dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
+                     dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
+                     pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
+                     pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
+                     trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
+                     trace0_clk_2_grp, testscan0_0_grp]
+            maxItems: 78
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given pin groups.
+            enum: [ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0, usb1, mdio0,
+                   mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1, spi0_ss,
+                   spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc, sdio1_wp,
+                   sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1, uart0, uart1,
+                   i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav,
+                   ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst, gpio0, pmu0,
+                   pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+      '^conf':
+        type: object
+        description:
+          Pinctrl node's client devices use subnodes for pin configurations,
+          which in turn use the standard properties below.
+        $ref: pincfg-node.yaml#
+
+        properties:
+          groups:
+            description:
+              List of pin groups as mentioned above.
+
+          pins:
+            description:
+              List of pin names to select in this subnode.
+            items:
+              pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$'
+            maxItems: 78
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          bias-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          bias-high-impedance: true
+
+          low-power-enable: true
+
+          low-power-disable: true
+
+          slew-rate:
+            enum: [0, 1]
+
+          output-enable:
+            description:
+              This will internally disable the tri-state for MIO pins.
+
+          drive-strength:
+            description:
+              Selects the drive strength for MIO pins, in mA.
+            enum: [2, 4, 8, 12]
+
+          power-source:
+            enum: [0, 1]
+
+        oneOf:
+          - required: [ groups ]
+          - required: [ pins ]
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+    zynqmp_firmware: zynqmp-firmware {
+        pinctrl0: pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+
+          pinctrl_uart1_default: uart1-default {
+             mux {
+                 groups = "uart0_4_grp", "uart0_5_grp";
+                 function = "uart0";
+             };
+
+             conf {
+                groups = "uart0_4_grp";
+                slew-rate = <SLEW_RATE_SLOW>;
+                power-source = <IO_STANDARD_LVCMOS18>;
+             };
+
+             conf-rx {
+                pins = "MIO18";
+                bias-pull-up;
+             };
+
+             conf-tx {
+                pins = "MIO19";
+                bias-disable;
+                input-schmitt-disable;
+             };
+          };
+        };
+    };
+
+    uart1 {
+         pinctrl-names = "default";
+         pinctrl-0 = <&pinctrl_uart1_default>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pmem/pmem-region.txt b/Documentation/devicetree/bindings/pmem/pmem-region.txt
new file mode 100644
index 0000000000..cd79975e85
--- /dev/null
+++ b/Documentation/devicetree/bindings/pmem/pmem-region.txt
@@ -0,0 +1,65 @@
+Device-tree bindings for persistent memory regions
+-----------------------------------------------------
+
+Persistent memory refers to a class of memory devices that are:
+
+	a) Usable as main system memory (i.e. cacheable), and
+	b) Retain their contents across power failure.
+
+Given b) it is best to think of persistent memory as a kind of memory mapped
+storage device. To ensure data integrity the operating system needs to manage
+persistent regions separately to the normal memory pool. To aid with that this
+binding provides a standardised interface for discovering where persistent
+memory regions exist inside the physical address space.
+
+Bindings for the region nodes:
+-----------------------------
+
+Required properties:
+	- compatible = "pmem-region"
+
+	- reg = <base, size>;
+		The reg property should specify an address range that is
+		translatable to a system physical address range. This address
+		range should be mappable as normal system memory would be
+		(i.e cacheable).
+
+		If the reg property contains multiple address ranges
+		each address range will be treated as though it was specified
+		in a separate device node. Having multiple address ranges in a
+		node implies no special relationship between the two ranges.
+
+Optional properties:
+	- Any relevant NUMA associativity properties for the target platform.
+
+	- volatile; This property indicates that this region is actually
+	  backed by non-persistent memory. This lets the OS know that it
+	  may skip the cache flushes required to ensure data is made
+	  persistent after a write.
+
+	  If this property is absent then the OS must assume that the region
+	  is backed by non-volatile memory.
+
+Examples:
+--------------------
+
+	/*
+	 * This node specifies one 4KB region spanning from
+	 * 0x5000 to 0x5fff that is backed by non-volatile memory.
+	 */
+	pmem@5000 {
+		compatible = "pmem-region";
+		reg = <0x00005000 0x00001000>;
+	};
+
+	/*
+	 * This node specifies two 4KB regions that are backed by
+	 * volatile (normal) memory.
+	 */
+	pmem@6000 {
+		compatible = "pmem-region";
+		reg = < 0x00006000 0x00001000
+			0x00008000 0x00001000 >;
+		volatile;
+	};
+
diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
new file mode 100644
index 0000000000..a3571937b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
@@ -0,0 +1,21 @@
+Actions Semi Owl Smart Power System (SPS)
+
+Required properties:
+- compatible          :  "actions,s500-sps" for S500
+                         "actions,s700-sps" for S700
+                         "actions,s900-sps" for S900
+- reg                 :  Offset and length of the register set for the device.
+- #power-domain-cells :  Must be 1.
+                         See macros in:
+                          include/dt-bindings/power/owl-s500-powergate.h for S500
+                          include/dt-bindings/power/owl-s700-powergate.h for S700
+                          include/dt-bindings/power/owl-s900-powergate.h for S900
+
+
+Example:
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
new file mode 100644
index 0000000000..46e2647a5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/allwinner,sun20i-d1-ppu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SoCs PPU power domain controller
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  D1 and related SoCs contain a power domain controller for the CPUs, GPU, and
+  video-related hardware.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-ppu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Bus Clock
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-r-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-r-ccu.h>
+
+    ppu: power-controller@7001000 {
+        compatible = "allwinner,sun20i-d1-ppu";
+        reg = <0x7001000 0x1000>;
+        clocks = <&r_ccu CLK_BUS_R_PPU>;
+        resets = <&r_ccu RST_BUS_R_PPU>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
new file mode 100644
index 0000000000..43a932237a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Everything-Else Power Domains
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |+
+  The Everything-Else Power Domains node should be the child of a syscon
+  node with the required property:
+
+  - compatible: Should be the following:
+                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson8-pwrc
+      - amlogic,meson8b-pwrc
+      - amlogic,meson8m2-pwrc
+      - amlogic,meson-gxbb-pwrc
+      - amlogic,meson-axg-pwrc
+      - amlogic,meson-g12a-pwrc
+      - amlogic,meson-sm1-pwrc
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: vpu
+      - const: vapb
+
+  resets:
+    minItems: 5
+    maxItems: 12
+
+  reset-names:
+    minItems: 5
+    maxItems: 12
+
+  "#power-domain-cells":
+    const: 1
+
+  amlogic,ao-sysctrl:
+    description: phandle to the AO sysctrl node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson8b-pwrc
+            - amlogic,meson8m2-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: dblk
+            - const: pic_dc
+            - const: hdmi_apb
+            - const: hdmi_system
+            - const: venci
+            - const: vencp
+            - const: vdac
+            - const: vencl
+            - const: viu
+            - const: venc
+            - const: rdma
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxbb-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: bt656
+            - const: dvin
+            - const: rdma
+            - const: venci
+            - const: vencp
+            - const: vdac
+            - const: vdi6
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-pwrc
+            - amlogic,meson-sm1-pwrc
+    then:
+      properties:
+        reset-names:
+          items:
+            - const: viu
+            - const: venc
+            - const: vcbus
+            - const: bt656
+            - const: rdma
+            - const: venci
+            - const: vencp
+            - const: vdac
+            - const: vdi6
+            - const: vencl
+            - const: vid_lock
+      required:
+        - resets
+        - reset-names
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#power-domain-cells"
+  - amlogic,ao-sysctrl
+
+additionalProperties: false
+
+examples:
+  - |
+    pwrc: power-controller {
+          compatible = "amlogic,meson-sm1-pwrc";
+          #power-domain-cells = <1>;
+          amlogic,ao-sysctrl = <&rti>;
+          resets = <&reset_viu>,
+                   <&reset_venc>,
+                   <&reset_vcbus>,
+                   <&reset_bt656>,
+                   <&reset_rdma>,
+                   <&reset_venci>,
+                   <&reset_vencp>,
+                   <&reset_vdac>,
+                   <&reset_vdi6>,
+                   <&reset_vencl>,
+                   <&reset_vid_lock>;
+          reset-names = "viu", "venc", "vcbus", "bt656",
+                        "rdma", "venci", "vencp", "vdac",
+                        "vdi6", "vencl", "vid_lock";
+          clocks = <&clk_vpu>, <&clk_vapb>;
+          clock-names = "vpu", "vapb";
+    };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
new file mode 100644
index 0000000000..ba5865ae6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -0,0 +1,63 @@
+Amlogic Meson Power Controller (deprecated)
+===========================================
+
+The Amlogic Meson SoCs embeds an internal Power domain controller.
+
+VPU Power Domain
+----------------
+
+The Video Processing Unit power domain is controlled by this power controller,
+but the domain requires some external resources to meet the correct power
+sequences.
+The bindings must respect the power domain bindings as described in the file
+power-domain.yaml
+
+Device Tree Bindings:
+---------------------
+
+Required properties:
+- compatible: should be one of the following :
+	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
+- #power-domain-cells: should be 0
+- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
+- resets: phandles to the reset lines needed for this power demain sequence
+	as described in ../reset/reset.txt
+- clocks: from common clock binding: handle to VPU and VAPB clocks
+- clock-names: from common clock binding: must contain "vpu", "vapb"
+	corresponding to entry in the clocks property.
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
+Example:
+-------
+
+ao_sysctrl: sys-ctrl@0 {
+	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+	reg =  <0x0 0x0 0x0 0x100>;
+
+	pwrc_vpu: power-controller-vpu {
+		compatible = "amlogic,meson-gx-pwrc-vpu";
+		#power-domain-cells = <0>;
+		amlogic,hhi-sysctrl = <&sysctrl>;
+		resets = <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_VCBUS>,
+			 <&reset RESET_BT656>,
+			 <&reset RESET_DVIN_RESET>,
+			 <&reset RESET_RDMA>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC>,
+			 <&reset RESET_VDI6>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VID_LOCK>;
+		clocks = <&clkc CLKID_VPU>,
+			 <&clkc CLKID_VAPB>;
+		clock-names = "vpu", "vapb";
+	};
+};
+
+
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
new file mode 100644
index 0000000000..d80bbedfe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+# Copyright (c) 2019 Amlogic, Inc
+# Author: Jianxin Pan <jianxin.pan@amlogic.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Secure Power Domains
+
+maintainers:
+  - Jianxin Pan <jianxin.pan@amlogic.com>
+
+description: |+
+  Secure Power Domains used in Meson A1/C1/S4 & C3 SoCs, and should be the child node
+  of secure-monitor.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-a1-pwrc
+      - amlogic,meson-s4-pwrc
+      - amlogic,c3-pwrc
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    secure-monitor {
+        compatible = "amlogic,meson-gxbb-sm";
+
+        pwrc: power-controller {
+            compatible = "amlogic,meson-a1-pwrc";
+            #power-domain-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
new file mode 100644
index 0000000000..59a6af735a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/apple,pmgr-pwrstate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC PMGR Power States
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+allOf:
+  - $ref: power-domain.yaml#
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This binding describes the device power
+  state registers, which control power states and resets.
+
+  Each instance of a power controller within the PMGR syscon node
+  represents a generic power domain provider, as documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml.
+  The provider controls a single SoC block. The power hierarchy is
+  represented via power-domains relationships between these nodes.
+
+  See Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+  for the top-level PMGR node documentation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr-pwrstate
+          - apple,t8112-pmgr-pwrstate
+          - apple,t6000-pmgr-pwrstate
+      - const: apple,pmgr-pwrstate
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  power-domains:
+    description:
+      Reference to parent power domains. A domain may have multiple parents,
+      and all will be powered up when it is powered.
+    minItems: 1
+    maxItems: 8 # Arbitrary, should be enough
+
+  label:
+    description:
+      Specifies the name of the SoC domain being controlled. This is used to
+      name the power/reset domains.
+
+  apple,always-on:
+    description:
+      Forces this power domain to always be powered up.
+    type: boolean
+
+  apple,min-state:
+    description:
+      Specifies the minimum power state for auto-PM.
+      0 = power gated, 4 = clock gated, 15 = on.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - label
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
new file mode 100644
index 0000000000..2fd2178d1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction (CPR)
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests adjustments to the voltage to save power
+  and meet silicon characteristic requirements.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qcs404-cpr
+      - const: qcom,cpr
+
+  reg:
+    description: Base address and size of the RBCPR register region.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock.
+
+  clock-names:
+    items:
+      - const: ref
+
+  vdd-apc-supply:
+    description: APC regulator supply.
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2:
+    description: |
+      A phandle to the OPP table containing the performance states
+      supported by the CPR power domain.
+
+  acc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the syscon used for writing ACC settings.
+
+  nvmem-cells:
+    items:
+      - description: Corner 1 quotient offset
+      - description: Corner 2 quotient offset
+      - description: Corner 3 quotient offset
+      - description: Corner 1 initial voltage
+      - description: Corner 2 initial voltage
+      - description: Corner 3 initial voltage
+      - description: Corner 1 quotient
+      - description: Corner 2 quotient
+      - description: Corner 3 quotient
+      - description: Corner 1 ring oscillator
+      - description: Corner 2 ring oscillator
+      - description: Corner 3 ring oscillator
+      - description: Fuse revision
+
+  nvmem-cell-names:
+    items:
+      - const: cpr_quotient_offset1
+      - const: cpr_quotient_offset2
+      - const: cpr_quotient_offset3
+      - const: cpr_init_voltage1
+      - const: cpr_init_voltage2
+      - const: cpr_init_voltage3
+      - const: cpr_quotient1
+      - const: cpr_quotient2
+      - const: cpr_quotient3
+      - const: cpr_ring_osc1
+      - const: cpr_ring_osc2
+      - const: cpr_ring_osc3
+      - const: cpr_fuse_revision
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdd-apc-supply
+  - '#power-domain-cells'
+  - operating-points-v2
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
+
+    power-controller@b018000 {
+        compatible = "qcom,qcs404-cpr", "qcom,cpr";
+        reg = <0x0b018000 0x1000>;
+        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xo_board>;
+        clock-names = "ref";
+        vdd-apc-supply = <&pms405_s3>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&cpr_opp_table>;
+        acc-syscon = <&tcsr>;
+
+        nvmem-cells = <&cpr_efuse_quot_offset1>,
+            <&cpr_efuse_quot_offset2>,
+            <&cpr_efuse_quot_offset3>,
+            <&cpr_efuse_init_voltage1>,
+            <&cpr_efuse_init_voltage2>,
+            <&cpr_efuse_init_voltage3>,
+            <&cpr_efuse_quot1>,
+            <&cpr_efuse_quot2>,
+            <&cpr_efuse_quot3>,
+            <&cpr_efuse_ring1>,
+            <&cpr_efuse_ring2>,
+            <&cpr_efuse_ring3>,
+            <&cpr_efuse_revision>;
+        nvmem-cell-names = "cpr_quotient_offset1",
+            "cpr_quotient_offset2",
+            "cpr_quotient_offset3",
+            "cpr_init_voltage1",
+            "cpr_init_voltage2",
+            "cpr_init_voltage3",
+            "cpr_quotient1",
+            "cpr_quotient2",
+            "cpr_quotient3",
+            "cpr_ring_osc1",
+            "cpr_ring_osc2",
+            "cpr_ring_osc3",
+            "cpr_fuse_revision";
+    };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
new file mode 100644
index 0000000000..f8e7ddbd27
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom PMB (Power Management Bus) controller
+
+description: This document describes Broadcom's PMB controller. It supports
+  powering various types of connected devices (e.g. PCIe, USB, SATA).
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4908-pmb
+      - brcm,bcm63138-pmb
+
+  reg:
+    description: register space of one or more buses
+    maxItems: 1
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Flag to use for block working in big endian mode.
+
+  "#power-domain-cells":
+    description: cell specifies device ID (see bcm-pmb.h)
+    const: 1
+
+required:
+  - reg
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/bcm-pmb.h>
+
+    pmb: power-controller@802800e0 {
+        compatible = "brcm,bcm4908-pmb";
+        reg = <0x802800e0 0x40>;
+        #power-domain-cells = <1>;
+    };
+
+    foo {
+        power-domains = <&pmb BCM_PMB_PCIE0>;
+    };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
new file mode 100644
index 0000000000..d867bd6976
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx power domain driver
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
+  to enable/disable certain components in order to save power.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm6318-power-controller
+          - brcm,bcm6328-power-controller
+          - brcm,bcm6362-power-controller
+          - brcm,bcm63268-power-controller
+
+  reg:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_pwr: power-controller@10001848 {
+        compatible = "brcm,bcm6328-power-controller";
+        reg = <0x10001848 0x4>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
new file mode 100644
index 0000000000..ec1f6f669e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PM Domain Idle States
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  A domain idle state node represents the state parameters that will be used to
+  select the state when there are no active components in the PM domain.
+
+properties:
+  $nodename:
+    const: domain-idle-states
+
+patternProperties:
+  "^(cpu|cluster|domain)-":
+    type: object
+    additionalProperties: false
+    description:
+      Each state node represents a domain idle state description.
+
+    properties:
+      compatible:
+        const: domain-idle-state
+
+      entry-latency-us:
+        description:
+          The worst case latency in microseconds required to enter the idle
+          state. Note that, the exit-latency-us duration may be guaranteed only
+          after the entry-latency-us has passed.
+
+      exit-latency-us:
+        description:
+          The worst case latency in microseconds required to exit the idle
+          state.
+
+      min-residency-us:
+        description:
+          The minimum residency duration in microseconds after which the idle
+          state will yield power benefits, after overcoming the overhead while
+          entering the idle state.
+
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+additionalProperties: false
+
+examples:
+  - |
+
+    domain-idle-states {
+      domain_retention: domain-retention {
+        compatible = "domain-idle-state";
+        entry-latency-us = <20>;
+        exit-latency-us = <40>;
+        min-residency-us = <80>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
new file mode 100644
index 0000000000..c21a66422d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+  counters and Power Gating Control (PGC).
+
+  The power domains are generic power domain providers as documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml. They are
+  described as subnodes of the power gating controller 'pgc' node of the GPC.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle pointing to the power domain the device belongs
+  to.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx6q-gpc
+      - items:
+          - enum:
+              - fsl,imx6qp-gpc
+              - fsl,imx6sl-gpc
+              - fsl,imx6sx-gpc
+              - fsl,imx6ul-gpc
+          - const: fsl,imx6q-gpc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  '#interrupt-cells':
+    const: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  pgc:
+    type: object
+    additionalProperties: false
+    description: list of power domains provided by this controller.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "power-domain@[0-9]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+
+          '#power-domain-cells':
+            const: 0
+
+          reg:
+            description: |
+              The following DOMAIN_INDEX values are valid for i.MX6Q:
+                ARM_DOMAIN     0
+                PU_DOMAIN      1
+              The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+                DISPLAY_DOMAIN 2
+              The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+                PCI_DOMAIN     3
+            maxItems: 1
+
+          clocks:
+            description: |
+              A number of phandles to clocks that need to be enabled during domain
+              power-up sequencing to ensure reset propagation into devices located
+              inside this power domain.
+            minItems: 1
+            maxItems: 7
+
+          power-supply: true
+
+        required:
+          - '#power-domain-cells'
+          - reg
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pgc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpc@20dc000 {
+        compatible = "fsl,imx6q-gpc";
+        reg = <0x020dc000 0x4000>;
+        interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_IPG>;
+        clock-names = "ipg";
+
+        pgc {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            power-domain@0 {
+                reg = <0>;
+                #power-domain-cells = <0>;
+            };
+
+            pd_pu: power-domain@1 {
+                reg = <1>;
+                #power-domain-cells = <0>;
+                power-supply = <&reg_pu>;
+                clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+                         <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+                         <&clks IMX6QDL_CLK_GPU2D_CORE>,
+                         <&clks IMX6QDL_CLK_GPU2D_AXI>,
+                         <&clks IMX6QDL_CLK_OPENVG_AXI>,
+                         <&clks IMX6QDL_CLK_VPU_AXI>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
new file mode 100644
index 0000000000..dfdb8dfb6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller v2
+
+maintainers:
+  - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+  The i.MX7S/D General Power Control (GPC) block contains Power Gating
+  Control (PGC) for various power domains.
+
+  Power domains contained within GPC node are generic power domain
+  providers, documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml, which are
+  described as subnodes of the power gating controller 'pgc' node.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle for PGC node representing the domain.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7d-gpc
+      - fsl,imx8mn-gpc
+      - fsl,imx8mq-gpc
+      - fsl,imx8mm-gpc
+      - fsl,imx8mp-gpc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+  '#interrupt-cells':
+    const: 3
+
+  pgc:
+    type: object
+    additionalProperties: false
+    description: list of power domains provided by this controller.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "power-domain@[0-9a-f]+$":
+        type: object
+        additionalProperties: false
+
+        properties:
+
+          '#power-domain-cells':
+            const: 0
+
+          reg:
+            description: |
+              Power domain index. Valid values are defined in
+              include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
+              include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+              include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
+              include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc
+            maxItems: 1
+
+          clocks:
+            description: |
+              A number of phandles to clocks that need to be enabled during domain
+              power-up sequencing to ensure reset propagation into devices located
+              inside this power domain.
+            minItems: 1
+            maxItems: 5
+
+          power-supply: true
+
+          power-domains:
+            maxItems: 1
+
+          resets:
+            description: |
+              A number of phandles to resets that need to be asserted during
+              power-up sequencing of the domain. The resets belong to devices
+              located inside the power domain, which need to be held in reset
+              across the power-up sequence. So no means to specify what each
+              reset is in a generic power-domain binding.
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - '#power-domain-cells'
+          - reg
+
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - pgc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpc@303a0000 {
+        compatible = "fsl,imx7d-gpc";
+        reg = <0x303a0000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+        pgc {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pgc_mipi_phy: power-domain@0 {
+                #power-domain-cells = <0>;
+                reg = <0>;
+                power-supply = <&reg_1p0d>;
+            };
+
+            pgc_pcie_phy: power-domain@1 {
+                #power-domain-cells = <0>;
+                reg = <1>;
+                power-supply = <&reg_1p0d>;
+            };
+
+            pgc_hsic_phy: power-domain@2 {
+                #power-domain-cells = <0>;
+                reg = <2>;
+                power-supply = <&reg_1p2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
new file mode 100644
index 0000000000..407b7cfec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Power Domain Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  Power domain bindings based on SCU Message Protocol
+
+allOf:
+  - $ref: power-domain.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qm-scu-pd
+          - fsl,imx8qxp-scu-pd
+      - const: fsl,scu-pd
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    power-controller {
+        compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
new file mode 100644
index 0000000000..c9acef80f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Power Domains Controller
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+  - Matthias Brugger <mbrugger@suse.com>
+
+description: |
+  Mediatek processors include support for multiple power domains which can be
+  powered up/down by software based on different application scenes to save power.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle for SCPSYS node representing the domain.
+
+properties:
+  $nodename:
+    pattern: '^power-controller(@[0-9a-f]+)?$'
+
+  compatible:
+    enum:
+      - mediatek,mt6795-power-controller
+      - mediatek,mt8167-power-controller
+      - mediatek,mt8173-power-controller
+      - mediatek,mt8183-power-controller
+      - mediatek,mt8186-power-controller
+      - mediatek,mt8188-power-controller
+      - mediatek,mt8192-power-controller
+      - mediatek,mt8195-power-controller
+
+  '#power-domain-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^power-domain@[0-9a-f]+$":
+    $ref: "#/$defs/power-domain-node"
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+        $ref: "#/$defs/power-domain-node"
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+            $ref: "#/$defs/power-domain-node"
+            patternProperties:
+              "^power-domain@[0-9a-f]+$":
+                $ref: "#/$defs/power-domain-node"
+                unevaluatedProperties: false
+            unevaluatedProperties: false
+        unevaluatedProperties: false
+    unevaluatedProperties: false
+
+$defs:
+  power-domain-node:
+    type: object
+    description: |
+      Represents the power domains within the power controller node as documented
+      in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+    properties:
+
+      '#power-domain-cells':
+        description:
+          Must be 0 for nodes representing a single PM domain and 1 for nodes
+          providing multiple PM domains.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        description: |
+          Power domain index. Valid values are defined in:
+              "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
+              "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
+              "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
+              "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
+              "include/dt-bindings/power/mediatek,mt8188-power.h" - for MT8188 type power domain.
+              "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
+              "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
+        maxItems: 1
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled during domain
+          power-up sequencing.
+
+      clock-names:
+        description: |
+          List of names of clocks, in order to match the power-up sequencing
+          for each power domain we need to group the clocks by name. BASIC
+          clocks need to be enabled before enabling the corresponding power
+          domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+          SUSBYS clocks need to be enabled before releasing the bus protection,
+          and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+          In order to follow properly the power-up sequencing, the clocks must
+          be specified by order, adding first the BASIC clocks followed by the
+          SUSBSYS clocks.
+
+      domain-supply:
+        description: domain regulator supply.
+
+      mediatek,infracfg:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to the device containing the INFRACFG register range.
+
+      mediatek,smi:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to the device containing the SMI register range.
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        scpsys: syscon@10006000 {
+            compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
+            reg = <0 0x10006000 0 0x1000>;
+
+            spm: power-controller {
+                compatible = "mediatek,mt8173-power-controller";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #power-domain-cells = <1>;
+
+                /* power domains of the SoC */
+                power-domain@MT8173_POWER_DOMAIN_VDEC {
+                    reg = <MT8173_POWER_DOMAIN_VDEC>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>;
+                    clock-names = "mm";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_VENC {
+                    reg = <MT8173_POWER_DOMAIN_VENC>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>,
+                             <&topckgen CLK_TOP_VENC_SEL>;
+                    clock-names = "mm", "venc";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_ISP {
+                    reg = <MT8173_POWER_DOMAIN_ISP>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>;
+                    clock-names = "mm";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_MM {
+                    reg = <MT8173_POWER_DOMAIN_MM>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>;
+                    clock-names = "mm";
+                    #power-domain-cells = <0>;
+                    mediatek,infracfg = <&infracfg>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+                    reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+                    clocks = <&topckgen CLK_TOP_MM_SEL>,
+                             <&topckgen CLK_TOP_VENC_LT_SEL>;
+                    clock-names = "mm", "venclt";
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_AUDIO {
+                    reg = <MT8173_POWER_DOMAIN_AUDIO>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_USB {
+                    reg = <MT8173_POWER_DOMAIN_USB>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+                    reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+                    clocks = <&clk26m>;
+                    clock-names = "mfg";
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    #power-domain-cells = <1>;
+
+                    power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+                        reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        #power-domain-cells = <1>;
+
+                        power-domain@MT8173_POWER_DOMAIN_MFG {
+                            reg = <MT8173_POWER_DOMAIN_MFG>;
+                            #power-domain-cells = <0>;
+                            mediatek,infracfg = <&infracfg>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
new file mode 100644
index 0000000000..be447ccfdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mti,mips-cpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Cluster Power Controller
+
+description: |
+  Defines a location of the MIPS Cluster Power Controller registers.
+
+maintainers:
+  - Paul Burton <paulburton@kernel.org>
+
+properties:
+  compatible:
+    const: mti,mips-cpc
+
+  reg:
+    description: |
+      Base address and size of an unoccupied memory region, which will be
+      used to map the MIPS CPC registers block.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpc@1bde0000 {
+      compatible = "mti,mips-cpc";
+      reg = <0x1bde0000 0x8000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml
new file mode 100644
index 0000000000..9c2c511334
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/pd-samsung.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Power Domains
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Exynos processors include support for multiple power domains which are used
+  to gate power to one or more peripherals on the processor.
+
+allOf:
+  - $ref: power-domain.yaml#
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-pd
+      - samsung,exynos5433-pd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    deprecated: true
+    maxItems: 1
+
+  clock-names:
+    deprecated: true
+    maxItems: 1
+
+  label:
+    description:
+      Human readable string with domain name. Will be visible in userspace
+      to let user to distinguish between multiple domains in SoC.
+
+  "#power-domain-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#power-domain-cells"
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lcd0_pd: power-domain@10023c80 {
+        compatible = "samsung,exynos4210-pd";
+        reg = <0x10023c80 0x20>;
+        #power-domain-cells = <0>;
+        label = "LCD0";
+    };
+
+    mfc_pd: power-domain@10044060 {
+        compatible = "samsung,exynos4210-pd";
+        reg = <0x10044060 0x20>;
+        #power-domain-cells = <0>;
+        label = "MFC";
+    };
diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt
new file mode 100644
index 0000000000..e45affea80
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-controller.txt
@@ -0,0 +1,17 @@
+* Generic system power control capability
+
+Power-management integrated circuits or miscellaneous hardware components are
+sometimes able to control the system power. The device driver associated with these
+components might need to define this capability, which tells the kernel that
+it can be used to switch off the system. The corresponding device must have the
+standard property "system-power-controller" in its device node. This property
+marks the device as able to control the system power. In order to test if this
+property is found programmatically, use the helper function
+"of_device_is_system_power_controller" from of.h .
+
+Example:
+
+act8846: act8846@5 {
+	 compatible = "active-semi,act8846";
+	 system-power-controller;
+}
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
new file mode 100644
index 0000000000..d1235e5620
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/power-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PM domains
+
+maintainers:
+  - Rafael J. Wysocki <rjw@rjwysocki.net>
+  - Kevin Hilman <khilman@kernel.org>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |+
+  System on chip designs are often divided into multiple PM domains that can be
+  used for power gating of selected IP blocks for power saving by reduced leakage
+  current.
+
+  This device tree binding can be used to bind PM domain consumer devices with
+  their PM domains provided by PM domain providers. A PM domain provider can be
+  represented by any node in the device tree and can provide one or more PM
+  domains. A consumer node can refer to the provider by a phandle and a set of
+  phandle arguments (so called PM domain specifiers) of length specified by the
+  \#power-domain-cells property in the PM domain provider node.
+
+properties:
+  $nodename:
+    pattern: "^(power-controller|power-domain)([@-].*)?$"
+
+  domain-idle-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      Phandles of idle states that defines the available states for the
+      power-domain provider. The idle state definitions are compatible with the
+      domain-idle-state bindings, specified in ./domain-idle-state.yaml.
+
+      Note that, the domain-idle-state property reflects the idle states of this
+      PM domain and not the idle states of the devices or sub-domains in the PM
+      domain. Devices and sub-domains have their own idle states independent of
+      the parent domain's idle states. In the absence of this property, the
+      domain would be considered as capable of being powered-on or powered-off.
+
+  operating-points-v2:
+    description:
+      Phandles to the OPP tables of power domains provided by a power domain
+      provider. If the provider provides a single power domain only or all
+      the power domains provided by the provider have identical OPP tables,
+      then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml
+      for more information.
+
+  "#power-domain-cells":
+    description:
+      Number of cells in a PM domain specifier. Typically 0 for nodes
+      representing a single PM domain and 1 for nodes providing multiple PM
+      domains (e.g. power controllers), but can be any value as specified
+      by device tree binding documentation of particular provider.
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings of the power
+      controller specified by phandle. Some power domains might be powered
+      from another power domain (or have other hardware specific
+      dependencies). For representing such dependency a standard PM domain
+      consumer binding is used. When provided, all domains created
+      by the given provider should be subdomains of the domain specified
+      by this binding.
+
+required:
+  - "#power-domain-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    power: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <1>;
+    };
+
+    // The node above defines a power controller that is a PM domain provider and
+    // expects one cell as its phandle argument.
+
+  - |
+    parent2: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <1>;
+    };
+
+    child2: power-controller@12341000 {
+        compatible = "foo,power-controller";
+        reg = <0x12341000 0x1000>;
+        power-domains = <&parent2 0>;
+        #power-domain-cells = <1>;
+    };
+
+    // The nodes above define two power controllers: 'parent' and 'child'.
+    // Domains created by the 'child' power controller are subdomains of '0' power
+    // domain provided by the 'parent' power controller.
+
+  - |
+    parent3: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <0>;
+        domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
+    };
+
+    child3: power-controller@12341000 {
+        compatible = "foo,power-controller";
+        reg = <0x12341000 0x1000>;
+        power-domains = <&parent3>;
+        #power-domain-cells = <0>;
+        domain-idle-states = <&DOMAIN_PWR_DN>;
+    };
+
+    domain-idle-states {
+        DOMAIN_RET: domain-retention {
+            compatible = "domain-idle-state";
+            entry-latency-us = <1000>;
+            exit-latency-us = <2000>;
+            min-residency-us = <10000>;
+        };
+
+        DOMAIN_PWR_DN: domain-pwr-dn {
+            compatible = "domain-idle-state";
+            entry-latency-us = <5000>;
+            exit-latency-us = <8000>;
+            min-residency-us = <7000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
new file mode 100644
index 0000000000..08497ef26c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -0,0 +1,112 @@
+* Generic PM domains
+
+System on chip designs are often divided into multiple PM domains that can be
+used for power gating of selected IP blocks for power saving by reduced leakage
+current.
+
+This device tree binding can be used to bind PM domain consumer devices with
+their PM domains provided by PM domain providers. A PM domain provider can be
+represented by any node in the device tree and can provide one or more PM
+domains. A consumer node can refer to the provider by a phandle and a set of
+phandle arguments (so called PM domain specifiers) of length specified by the
+#power-domain-cells property in the PM domain provider node.
+
+==PM domain providers==
+
+See power-domain.yaml.
+
+==PM domain consumers==
+
+Required properties:
+ - power-domains : A list of PM domain specifiers, as defined by bindings of
+		the power controller that is the PM domain provider.
+
+Optional properties:
+ - power-domain-names : A list of power domain name strings sorted in the same
+		order as the power-domains property. Consumers drivers will use
+		power-domain-names to match power domains with power-domains
+		specifiers.
+
+Example:
+
+	leaky-device@12350000 {
+		compatible = "foo,i-leak-current";
+		reg = <0x12350000 0x1000>;
+		power-domains = <&power 0>;
+		power-domain-names = "io";
+	};
+
+	leaky-device@12351000 {
+		compatible = "foo,i-leak-current";
+		reg = <0x12351000 0x1000>;
+		power-domains = <&power 0>, <&power 1> ;
+		power-domain-names = "io", "clk";
+	};
+
+The first example above defines a typical PM domain consumer device, which is
+located inside a PM domain with index 0 of a power controller represented by a
+node with the label "power".
+In the second example the consumer device are partitioned across two PM domains,
+the first with index 0 and the second with index 1, of a power controller that
+is represented by a node with the label "power".
+
+Optional properties:
+- required-opps: This contains phandle to an OPP node in another device's OPP
+  table. It may contain an array of phandles, where each phandle points to an
+  OPP of a different device. It should not contain multiple phandles to the OPP
+  nodes in the same OPP table. This specifies the minimum required OPP of the
+  device(s), whose OPP's phandle is present in this property, for the
+  functioning of the current device at the current OPP (where this property is
+  present).
+
+Example:
+- OPP table for domain provider that provides two domains.
+
+	domain0_opp_table: opp-table0 {
+		compatible = "operating-points-v2";
+
+		domain0_opp_0: opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000 970000 985000>;
+		};
+		domain0_opp_1: opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1000000 980000 1010000>;
+		};
+	};
+
+	domain1_opp_table: opp-table1 {
+		compatible = "operating-points-v2";
+
+		domain1_opp_0: opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000 970000 985000>;
+		};
+		domain1_opp_1: opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1000000 980000 1010000>;
+		};
+	};
+
+	power: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12340000 0x1000>;
+		#power-domain-cells = <1>;
+		operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>;
+	};
+
+	leaky-device0@12350000 {
+		compatible = "foo,i-leak-current";
+		reg = <0x12350000 0x1000>;
+		power-domains = <&power 0>;
+		required-opps = <&domain0_opp_0>;
+	};
+
+	leaky-device1@12350000 {
+		compatible = "foo,i-leak-current";
+		reg = <0x12350000 0x1000>;
+		power-domains = <&power 1>;
+		required-opps = <&domain1_opp_1>;
+	};
+
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml
diff --git a/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml b/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml
new file mode 100644
index 0000000000..202a5d51ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,kpss-acc-v2.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/qcom,kpss-acc-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Application Clock Controller (ACC) v2
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  The KPSS ACC provides clock, power manager, and reset control to a Krait CPU.
+  There is one ACC register region per CPU within the KPSS remapped region as
+  well as an alias register region that remaps accesses to the ACC associated
+  with the CPU accessing the region. ACC v2 is currently used as a
+  power-manager for enabling the cpu.
+
+properties:
+  compatible:
+    const: qcom,kpss-acc-v2
+
+  reg:
+    items:
+      - description: Base address and size of the register region
+      - description: Optional base address and size of the alias register region
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    power-manager@f9088000 {
+      compatible = "qcom,kpss-acc-v2";
+      reg = <0xf9088000 0x1000>,
+            <0xf9008000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
new file mode 100644
index 0000000000..9b03c41d36
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/qcom,rpmpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM/RPMh Power domains
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
+  which then translates it into a corresponding voltage on a rail.
+
+properties:
+  compatible:
+    enum:
+      - qcom,mdm9607-rpmpd
+      - qcom,msm8226-rpmpd
+      - qcom,msm8909-rpmpd
+      - qcom,msm8916-rpmpd
+      - qcom,msm8939-rpmpd
+      - qcom,msm8953-rpmpd
+      - qcom,msm8976-rpmpd
+      - qcom,msm8994-rpmpd
+      - qcom,msm8996-rpmpd
+      - qcom,msm8998-rpmpd
+      - qcom,qcm2290-rpmpd
+      - qcom,qcs404-rpmpd
+      - qcom,qdu1000-rpmhpd
+      - qcom,sa8155p-rpmhpd
+      - qcom,sa8540p-rpmhpd
+      - qcom,sa8775p-rpmhpd
+      - qcom,sdm660-rpmpd
+      - qcom,sc7180-rpmhpd
+      - qcom,sc7280-rpmhpd
+      - qcom,sc8180x-rpmhpd
+      - qcom,sc8280xp-rpmhpd
+      - qcom,sdm670-rpmhpd
+      - qcom,sdm845-rpmhpd
+      - qcom,sdx55-rpmhpd
+      - qcom,sdx65-rpmhpd
+      - qcom,sdx75-rpmhpd
+      - qcom,sm6115-rpmpd
+      - qcom,sm6125-rpmpd
+      - qcom,sm6350-rpmhpd
+      - qcom,sm6375-rpmpd
+      - qcom,sm8150-rpmhpd
+      - qcom,sm8250-rpmhpd
+      - qcom,sm8350-rpmhpd
+      - qcom,sm8450-rpmhpd
+      - qcom,sm8550-rpmhpd
+
+  '#power-domain-cells':
+    const: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+required:
+  - compatible
+  - '#power-domain-cells'
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+
+    // Example 1 (rpmh power domain controller and OPP table):
+
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rpmhpd: power-controller {
+      compatible = "qcom,sdm845-rpmhpd";
+      #power-domain-cells = <1>;
+      operating-points-v2 = <&rpmhpd_opp_table>;
+
+      rpmhpd_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        rpmhpd_opp_ret: opp1 {
+          opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+        };
+
+        rpmhpd_opp_min_svs: opp2 {
+          opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+        };
+
+        rpmhpd_opp_low_svs: opp3 {
+          opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+        };
+
+        rpmhpd_opp_svs: opp4 {
+          opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+        };
+
+        rpmhpd_opp_svs_l1: opp5 {
+          opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+        };
+
+        rpmhpd_opp_nom: opp6 {
+          opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+        };
+
+        rpmhpd_opp_nom_l1: opp7 {
+          opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+        };
+
+        rpmhpd_opp_nom_l2: opp8 {
+          opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+        };
+
+        rpmhpd_opp_turbo: opp9 {
+          opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+        };
+
+        rpmhpd_opp_turbo_l1: opp10 {
+          opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+        };
+      };
+    };
+
+  - |
+
+    // Example 2 (rpm power domain controller and OPP table):
+
+    rpmpd: power-controller {
+      compatible = "qcom,msm8996-rpmpd";
+      #power-domain-cells = <1>;
+      operating-points-v2 = <&rpmpd_opp_table>;
+
+      rpmpd_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        rpmpd_opp_low: opp1 {
+          opp-level = <1>;
+        };
+
+        rpmpd_opp_ret: opp2 {
+          opp-level = <2>;
+        };
+
+        rpmpd_opp_svs: opp3 {
+          opp-level = <3>;
+        };
+
+        rpmpd_opp_normal: opp4 {
+          opp-level = <4>;
+        };
+
+        rpmpd_opp_high: opp5 {
+          opp-level = <5>;
+        };
+
+        rpmpd_opp_turbo: opp6 {
+          opp-level = <6>;
+        };
+      };
+    };
+
+  - |
+
+    // Example 3 (Client/Consumer device using OPP table):
+
+    leaky-device0@12350000 {
+      compatible = "foo,i-leak-current";
+      reg = <0x12350000 0x1000>;
+      power-domains = <&rpmhpd 0>;
+      operating-points-v2 = <&leaky_opp_table>;
+    };
+
+    leaky_opp_table: opp-table {
+      compatible = "operating-points-v2";
+      opp1 {
+        opp-hz = /bits/ 64 <144000>;
+        required-opps = <&rpmhpd_opp_low>;
+      };
+
+      opp2 {
+        opp-hz = /bits/ 64 <400000>;
+        required-opps = <&rpmhpd_opp_ret>;
+      };
+
+      opp3 {
+        opp-hz = /bits/ 64 <20000000>;
+        required-opps = <&rpmpd_opp_svs>;
+      };
+
+      opp4 {
+        opp-hz = /bits/ 64 <25000000>;
+        required-opps = <&rpmpd_opp_normal>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
new file mode 100644
index 0000000000..2b4d802ef4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,apmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Advanced Power Management Unit
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description:
+  Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for
+  CPU core power domain control including SMP boot and CPU Hotplug.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7742-apmu  # RZ/G1H
+          - renesas,r8a7743-apmu  # RZ/G1M
+          - renesas,r8a7744-apmu  # RZ/G1N
+          - renesas,r8a7745-apmu  # RZ/G1E
+          - renesas,r8a77470-apmu # RZ/G1C
+          - renesas,r8a7790-apmu  # R-Car H2
+          - renesas,r8a7791-apmu  # R-Car M2-W
+          - renesas,r8a7792-apmu  # R-Car V2H
+          - renesas,r8a7793-apmu  # R-Car M2-N
+          - renesas,r8a7794-apmu  # R-Car E2
+      - const: renesas,apmu
+
+  reg:
+    maxItems: 1
+
+  cpus:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Array of phandles pointing to CPU cores, which should match the order of
+      CPU cores used by the WUPCR and PSTR registers in the Advanced Power
+      Management Unit section of the device's datasheet.
+
+required:
+  - compatible
+  - reg
+  - cpus
+
+additionalProperties: false
+
+examples:
+  - |
+    apmu@e6152000 {
+            compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+            reg = <0xe6152000 0x188>;
+            cpus = <&cpu0>, <&cpu1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
new file mode 100644
index 0000000000..0720b54881
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G System Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Car (RZ/G) System Controller provides power management for the CPU
+  cores and various coprocessors.
+  The power domain IDs for consumers are defined in header files::
+  include/dt-bindings/power/r8*-sysc.h
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-sysc  # RZ/G1H
+      - renesas,r8a7743-sysc  # RZ/G1M
+      - renesas,r8a7744-sysc  # RZ/G1N
+      - renesas,r8a7745-sysc  # RZ/G1E
+      - renesas,r8a77470-sysc # RZ/G1C
+      - renesas,r8a774a1-sysc # RZ/G2M
+      - renesas,r8a774b1-sysc # RZ/G2N
+      - renesas,r8a774c0-sysc # RZ/G2E
+      - renesas,r8a774e1-sysc # RZ/G2H
+      - renesas,r8a7779-sysc  # R-Car H1
+      - renesas,r8a7790-sysc  # R-Car H2
+      - renesas,r8a7791-sysc  # R-Car M2-W
+      - renesas,r8a7792-sysc  # R-Car V2H
+      - renesas,r8a7793-sysc  # R-Car M2-N
+      - renesas,r8a7794-sysc  # R-Car E2
+      - renesas,r8a7795-sysc  # R-Car H3
+      - renesas,r8a77961-sysc # R-Car M3-W+
+      - renesas,r8a77965-sysc # R-Car M3-N
+      - renesas,r8a7796-sysc  # R-Car M3-W
+      - renesas,r8a77970-sysc # R-Car V3M
+      - renesas,r8a77980-sysc # R-Car V3H
+      - renesas,r8a77990-sysc # R-Car E3
+      - renesas,r8a77995-sysc # R-Car D3
+      - renesas,r8a779a0-sysc # R-Car V3U
+      - renesas,r8a779f0-sysc # R-Car S4-8
+      - renesas,r8a779g0-sysc # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // System Controller node
+    sysc: system-controller@e6180000 {
+            compatible = "renesas,r8a7791-sysc";
+            reg = <0xe6180000 0x0200>;
+            #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
new file mode 100644
index 0000000000..fba6914ec4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,sysc-rmobile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile System Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Mobile System Controller provides the following functions:
+    - Boot mode management,
+    - Reset generation,
+    - Power management.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,sysc-r8a73a4    # R-Mobile APE6
+          - renesas,sysc-r8a7740    # R-Mobile A1
+          - renesas,sysc-sh73a0     # SH-Mobile AG5
+      - const: renesas,sysc-rmobile # Generic SH/R-Mobile
+
+  reg:
+    items:
+      - description: Normally accessible register block
+      - description: Register block protected by the HPB semaphore
+
+  pm-domains:
+    type: object
+    description: |
+      This node contains a hierarchy of PM domain nodes, which should match the
+      Power Area Hierarchy in the Power Domain Specifications section of the
+      device's datasheet.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    additionalProperties:
+      $ref: "#/$defs/pd-node"
+
+required:
+  - compatible
+  - reg
+  - pm-domains
+
+additionalProperties: false
+
+$defs:
+  pd-node:
+    type: object
+    description:
+      PM domain node representing a PM domain.  This node should be named by
+      the real power area name, and thus its name should be unique.
+
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          If the PM domain is not always-on, this property must contain the
+          bit index number for the corresponding power area in the various
+          Power Control and Status Registers.
+          If the PM domain is always-on, this property must be omitted.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#power-domain-cells':
+        const: 0
+
+    required:
+      - '#power-domain-cells'
+
+    additionalProperties:
+      $ref: "#/$defs/pd-node"
+
+examples:
+  - |
+    // This shows a subset of the r8a7740 PM domain hierarchy, containing the
+    // C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP
+    // domain, which is a subdomain of A4S.
+    sysc: system-controller@e6180000 {
+            compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+            reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+            pm-domains {
+                    pd_c5: c5 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            #power-domain-cells = <0>;
+
+                            pd_a4s: a4s@10 {
+                                    reg = <10>;
+                                    #address-cells = <1>;
+                                    #size-cells = <0>;
+                                    #power-domain-cells = <0>;
+
+                                    pd_a3sp: a3sp@11 {
+                                            reg = <11>;
+                                            #power-domain-cells = <0>;
+                                    };
+                            };
+
+                            pd_a4su: a4su@20 {
+                                    reg = <20>;
+                                    #power-domain-cells = <0>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
new file mode 100644
index 0000000000..f559a2cfd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,at91sam9260-shdwc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,at91sam9260-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9260-shdwc
+      - atmel,at91sam9rl-shdwc
+      - atmel,at91sam9x5-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,wakeup-mode:
+    description: operation mode of the wakeup mode
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ none, high, low, any ]
+
+  atmel,wakeup-counter:
+    description: counter on wake-up 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9x5-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91sam9260-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtc-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@fffffd10 {
+        compatible = "atmel,at91sam9260-shdwc";
+        reg = <0xfffffd10 0x10>;
+        clocks = <&clk32k>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
new file mode 100644
index 0000000000..8c58e12cdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/atmel,sama5d2-shdwc.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/atmel,sama5d2-shdwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 SAMA5D2 SHDWC Shutdown Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  Microchip AT91 SHDWC shutdown controller controls the power supplies VDDIO
+  and VDDCORE and the wake-up detection on debounced input lines.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,sama7g5-shdwc
+          - const: syscon
+      - enum:
+          - atmel,sama5d2-shdwc
+          - microchip,sam9x60-shdwc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  debounce-delay-us:
+    description:
+      Minimum wake-up inputs debouncer period in microseconds. It is usually a
+      board-related property.
+
+  atmel,wakeup-rtc-timer:
+    description: enable real-time clock wake-up
+    type: boolean
+
+  atmel,wakeup-rtt-timer:
+    description: enable real-time timer wake-up
+    type: boolean
+
+patternProperties:
+  "^input@[0-15]$":
+    description:
+      Wake-up input nodes. These are usually described in the "board" part of
+      the Device Tree. Note also that input 0 is linked to the wake-up pin and
+      is frequently used.
+    type: object
+    properties:
+      reg:
+        description: contains the wake-up input index
+        minimum: 0
+        maximum: 15
+
+      atmel,wakeup-active-high:
+        description:
+          The corresponding wake-up input described by the child forces the
+          wake-up of the core power supply on a high level. The default is to
+          be active low.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-shdwc
+    then:
+      properties:
+        atmel,wakeup-rtt-timer: false
+
+additionalProperties: false
+
+examples:
+  - |
+    shdwc: poweroff@f8048010 {
+        compatible = "atmel,sama5d2-shdwc";
+        reg = <0xf8048010 0x10>;
+        clocks = <&clk32k>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,wakeup-rtc-timer;
+        debounce-delay-us = <976>;
+
+        input@0 {
+            reg = <0>;
+        };
+
+        input@1 {
+            reg = <1>;
+            atmel,wakeup-active-high;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/reset/axxia-reset.txt b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt
new file mode 100644
index 0000000000..47e720d249
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt
@@ -0,0 +1,20 @@
+Axxia Restart Driver
+
+This driver can do reset of the Axxia SoC. It uses the registers in the syscon
+block to initiate a chip reset.
+
+Required Properties:
+  -compatible: "lsi,axm55xx-reset"
+  -syscon: phandle to the syscon node.
+
+Example:
+
+	syscon: syscon@2010030000 {
+		compatible = "lsi,axxia-syscon", "syscon";
+		reg = <0x20 0x10030000 0 0x2000>;
+	};
+
+	reset: reset@2010031000 {
+		compatible = "lsi,axm55xx-reset";
+		syscon = <&syscon>;
+	};
diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml
new file mode 100644
index 0000000000..3e28a59d71
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/brcm,bcm21664-resetmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family reset manager
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm21664-resetmgr
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@35001f00 {
+        compatible = "brcm,bcm21664-resetmgr";
+        reg = <0x35001f00 0x24>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt
new file mode 100644
index 0000000000..7fec3e1002
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt
@@ -0,0 +1,17 @@
+* Device-Tree bindings for Cortina Systems Gemini Poweroff
+
+This is a special IP block in the Cortina Gemini SoC that only
+deals with different ways to power the system down.
+
+Required properties:
+- compatible: should be "cortina,gemini-power-controller"
+- reg: should contain the physical memory base and size
+- interrupts: should contain the power management interrupt
+
+Example:
+
+power-controller@4b000000 {
+	compatible = "cortina,gemini-power-controller";
+	reg = <0x4b000000 0x100>;
+	interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
new file mode 100644
index 0000000000..b54ec003a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled power off
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  System power off support via a GPIO line. When a shutdown is
+  executed the operating system is expected to switch the GPIO
+  from inactive to active. After a delay (active-delay-ms) it
+  is expected to be switched back to inactive. After another
+  delay (inactive-delay-ms) it is configured as active again.
+  Finally the operating system assumes the power off failed if
+  the system is still running after waiting some time (timeout-ms).
+
+properties:
+  compatible:
+    const: gpio-poweroff
+
+  gpios:
+    maxItems: 1
+
+  input:
+    type: boolean
+    description: >
+      Initially configure the GPIO line as an input. Only reconfigure
+      it to an output when the power-off sequence is initiated. If this optional
+      property is not specified, the GPIO is initialized as an output in its inactive state.
+
+  active-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio active
+
+  inactive-delay-ms:
+    default: 100
+    description: Delay to wait after driving gpio inactive
+
+  timeout-ms:
+    default: 3000
+    description: Time to wait before assuming the power off sequence failed.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-poweroff {
+        compatible = "gpio-poweroff";
+        gpios = <&gpio 4 0>;
+        timeout-ms = <3000>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
new file mode 100644
index 0000000000..53535de0d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled reset
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Drive a GPIO line that can be used to restart the system from a restart handler.
+
+  This binding supports level and edge triggered reset.  At driver load time, the driver will
+  request the given gpio line and install a restart handler. If the optional properties
+  'open-source' is not found, the GPIO line will be driven in the inactive state.  Otherwise its
+  not driven until the restart is initiated.
+
+  When the system is restarted, the restart handler will be invoked in priority order.  The GPIO
+  is configured as an output, and driven active, triggering a level triggered reset condition.
+  This will also cause an inactive->active edge condition, triggering positive edge triggered
+  reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an
+  active->inactive edge, triggering negative edge triggered reset. After a delay specified by
+  inactive-delay, the GPIO is driven active again.  After a delay specified by wait-delay, the
+  restart handler completes allowing other restart handlers to be attempted.
+
+allOf:
+  - $ref: restart-handler.yaml#
+
+properties:
+  compatible:
+    const: gpio-restart
+
+  gpios:
+    description: The GPIO to set high/low, see "gpios property" in
+      Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board
+      set it to "Active Low", otherwise set GPIO to "Active High".
+
+  open-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Treat the GPIO as being open source and defer driving it to when the restart is
+      initiated.  If this optional property is not specified, the GPIO is initialized as an output
+      in its inactive state.
+
+  priority:
+    default: 129
+
+  active-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio active [ms]
+    default: 100
+
+  inactive-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio inactive [ms]
+    default: 100
+
+  wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 3000) to wait after completing restart sequence [ms]
+    default: 100
+
+additionalProperties: false
+
+required:
+  - compatible
+  - gpios
+
+examples:
+  - |
+    gpio-restart {
+      compatible = "gpio-restart";
+      gpios = <&gpio 4 0>;
+      priority = <128>;
+      active-delay = <100>;
+      inactive-delay = <100>;
+      wait-delay = <3000>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
new file mode 100644
index 0000000000..c5c03789ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
@@ -0,0 +1,67 @@
+* Device tree bindings for Texas Instruments keystone reset
+
+This node is intended to allow SoC reset in case of software reset
+of selected watchdogs.
+
+The Keystone SoCs can contain up to 4 watchdog timers to reset
+SoC. Each watchdog timer event input is connected to the Reset Mux
+block. The Reset Mux block can be configured to cause reset or not.
+
+Additionally soft or hard reset can be configured.
+
+Required properties:
+
+- compatible:		ti,keystone-reset
+
+- ti,syscon-pll:	phandle/offset pair. The phandle to syscon used to
+			access pll controller registers and the offset to use
+			reset control registers.
+
+- ti,syscon-dev:	phandle/offset pair. The phandle to syscon used to
+			access device state control registers and the offset
+			in order to use mux block registers for all watchdogs.
+
+Optional properties:
+
+- ti,soft-reset:	Boolean option indicating soft reset.
+			By default hard reset is used.
+
+- ti,wdt-list:		WDT list that can cause SoC reset. It's not related
+			to WDT driver, it's just needed to enable a SoC related
+			reset that's triggered by one of WDTs. The list is
+			in format: <0>, <2>; It can be in random order and
+			begins from 0 to 3, as keystone can contain up to 4 SoC
+			reset watchdogs and can be in random order.
+
+Example 1:
+Setup keystone reset so that in case software reset or
+WDT0 is triggered it issues hard reset for SoC.
+
+pllctrl: pll-controller@2310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
+
+devctrl: device-state-control@2620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>;
+};
+
+Example 2:
+Setup keystone reset so that in case of software reset or
+WDT0 or WDT2 is triggered it issues soft reset for SoC.
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>, <2>;
+	ti,soft-reset;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
new file mode 100644
index 0000000000..38e54b3fd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -0,0 +1,33 @@
+Binding for the LTC2952 PowerPath controller
+
+This chip is used to externally trigger a system shut down. Once the trigger has
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
+
+Required properties:
+
+- compatible:		Must contain: "lltc,ltc2952"
+- watchdog-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's watchdog line
+- kill-gpios:		phandle + gpio-specifier for the GPIO connected to the
+			chip's kill line
+
+Optional properties:
+- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's trigger line. If this property is not set, the
+			trigger function is ignored and the chip is kept alive
+			until an explicit kill signal is received
+- trigger-delay-ms	The number of milliseconds to wait after trigger line
+			assertion before executing shut down procedure.
+			The default is 2500ms.
+
+Example:
+
+ltc2952 {
+	compatible = "lltc,ltc2952";
+
+	trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+	trigger-delay-ms = <2000>;
+	watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
new file mode 100644
index 0000000000..933f0c48e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
@@ -0,0 +1,20 @@
+Device Tree Bindings for Power Controller on MediaTek PMIC
+
+The power controller which could be found on PMIC is responsible for externally
+powering off or on the remote MediaTek SoC through the circuit BBPU.
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-pwrc": for MT6323 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               power-controller {
+                       compatible = "mediatek,mt6323-pwrc";
+               };
+       }
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
new file mode 100644
index 0000000000..14a262bcbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/nvmem-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic NVMEM reboot mode
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  This driver gets the reboot mode magic value from the reboot-mode driver
+  and stores it in the NVMEM cell named "reboot-mode". The bootloader can
+  then read it and take different action according to the value.
+
+properties:
+  compatible:
+    const: nvmem-reboot-mode
+
+  nvmem-cells:
+    description:
+      A phandle pointing to the nvmem-cells node where the vendor-specific
+      magic value representing the reboot mode is stored.
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: reboot-mode
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+required:
+  - compatible
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    reboot-mode {
+        compatible = "nvmem-reboot-mode";
+        nvmem-cells = <&reboot_reason>;
+        nvmem-cell-names = "reboot-mode";
+        mode-recovery = <0x01>;
+        mode-bootloader = <0x02>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
new file mode 100644
index 0000000000..c5de7b555f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -0,0 +1,19 @@
+Microsemi Ocelot reset controller
+
+The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.
+
+Required Properties:
+
+ - compatible: "mscc,ocelot-chip-reset", "mscc,luton-chip-reset",
+   "mscc,jaguar2-chip-reset" or "microchip,sparx5-chip-reset"
+
+Example:
+	reset@1070008 {
+		compatible = "mscc,ocelot-chip-reset";
+		reg = <0x1070008 0x4>;
+	};
+
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 0000000000..5e460128b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+  and resin along with the Android reboot-mode.
+
+  This DT node has pwrkey and resin as sub nodes.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8916-pon
+      - qcom,pm8941-pon
+      - qcom,pms405-pon
+      - qcom,pm8998-pon
+      - qcom,pmk8350-pon
+
+  reg:
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMIC.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+  pwrkey:
+    type: object
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  resin:
+    type: object
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-pon
+              - qcom,pms405-pon
+              - qcom,pm8998-pon
+    then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+    # Special case for pm8941, which doesn't store reset mode
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmk8350-pon
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          items:
+            - const: hlos
+            - const: pbs
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   #include <dt-bindings/input/linux-event-codes.h>
+   #include <dt-bindings/spmi/spmi.h>
+   spmi_bus: spmi@c440000 {
+     reg = <0x0c440000 0x1100>;
+     #address-cells = <2>;
+     #size-cells = <0>;
+     pmk8350: pmic@0 {
+       reg = <0x0 SPMI_USID>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       pmk8350_pon: pon_hlos@1300 {
+         reg = <0x1300>;
+         compatible = "qcom,pm8998-pon";
+
+         pwrkey {
+            compatible = "qcom,pm8941-pwrkey";
+            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_POWER>;
+         };
+
+         resin {
+            compatible = "qcom,pm8941-resin";
+            interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_VOLUMEDOWN>;
+         };
+       };
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
new file mode 100644
index 0000000000..527962d54a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC restart and power off
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets.
+  Clearing that bit allows us to restart/power off. The difference between
+  power off and restart is determined by unique power manager IC settings.
+
+properties:
+  compatible:
+    const: qcom,pshold
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@fc4ab000 {
+        compatible = "qcom,pshold";
+        reg = <0xfc4ab000 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
new file mode 100644
index 0000000000..c363d71731
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
@@ -0,0 +1,15 @@
+* QNAP Power Off
+
+QNAP NAS devices have a microcontroller controlling the main power
+supply. This microcontroller is connected to UART1 of the Kirkwood and
+Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
+microcontroller to turn the power off.
+
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
+Required Properties:
+- compatible: Should be "qnap,power-off" or "synology,power-off"
+
+- reg: Address and length of the register set for UART1
+- clocks: tclk clock
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
new file mode 100644
index 0000000000..ad0a0b95ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic reboot mode core map
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  This driver get reboot mode arguments and call the write
+  interface to store the magic value in special register
+  or ram. Then the bootloader can read it and take different
+  action according to the argument stored.
+
+  All mode properties are vendor specific, it is a indication to tell
+  the bootloader what to do when the system reboots, and should be named
+  as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value).
+
+  For example, modes common Android platform are:
+    - normal: Normal reboot mode, system reboot with command "reboot".
+    - recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+    - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+    - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+              usually used in development.
+
+properties:
+  mode-normal:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Default value to set on a reboot if no command was provided.
+
+patternProperties:
+  "^mode-.*$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    reboot-mode {
+      mode-normal = <0>;
+      mode-recovery = <1>;
+      mode-bootloader = <2>;
+      mode-loader = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
new file mode 100644
index 0000000000..e9417557cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/regulator-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Force-disable power regulator to turn the power off.
+
+maintainers:
+  - Michael Klein <michael@fossekall.de>
+
+description: |
+  When the power-off handler is called, a power regulator is disabled by
+  calling regulator_force_disable(). If the power is still on and the
+  CPU still running after a 3000ms delay, a warning is emitted.
+
+properties:
+  compatible:
+    const: regulator-poweroff
+
+  cpu-supply:
+    description:
+      regulator to disable on power-down
+
+required:
+  - compatible
+  - cpu-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    regulator-poweroff {
+        compatible = "regulator-poweroff";
+        cpu-supply = <&reg_vcc1v2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/restart-handler.yaml b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
new file mode 100644
index 0000000000..965a834a3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/restart-handler.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/restart-handler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Restart and shutdown handler Common Properties
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  Restart and shutdown handler device is responsible for powering off the
+  system, e.g. my cutting off the power.  System might have several restart
+  handlers, which usually are tried from most precise to last resort.
+
+properties:
+  priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      A priority ranging from 0 to 255 according to the following guidelines::
+        0::   Restart handler of last resort, with limited restart capabilities.
+        128:: Typical, default restart handler; use if no other restart handler
+              is expected to be available, and/or if restart functionality is
+              sufficient to restart the entire system.
+        255:: Highest priority restart handler, will preempt all other restart handlers.
+    minimum: 0
+    maximum: 255
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt
new file mode 100644
index 0000000000..5776e684af
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt
@@ -0,0 +1,8 @@
+* Restart Power Off
+
+Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off
+by restarting and letting u-boot keep hold of the machine until the
+user presses a button.
+
+Required Properties:
+- compatible: Should be "restart-poweroff"
diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt
new file mode 100644
index 0000000000..b63948737d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt
@@ -0,0 +1,11 @@
+*Device-Tree bindings for ST SW reset functionality
+
+Required properties:
+- compatible: should be "stih407-restart".
+- st,syscfg: should be a phandle of the syscfg node.
+
+Example node:
+	restart {
+		compatible = "st,stih407-restart";
+		st,syscfg = <&syscfg_sbc_reg>;
+	};
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
new file mode 100644
index 0000000000..3412fe7e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register poweroff driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+  This is a generic poweroff driver using syscon to map the poweroff register.
+  The poweroff is generally performed with a write to the poweroff register
+  defined by the register map pointed by syscon reference plus the offset
+  with the value and mask defined in the poweroff node.
+  Default will be little endian mode, 32 bit access only.
+
+properties:
+  compatible:
+    const: syscon-poweroff
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit).
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the poweroff register (in bytes).
+
+  regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the register map node.
+
+  value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The poweroff value written to the poweroff register (32 bit access).
+
+required:
+  - compatible
+  - regmap
+  - offset
+
+additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        required:
+          - mask
+    then:
+      required:
+        - value
+
+examples:
+  - |
+    poweroff {
+        compatible = "syscon-poweroff";
+        regmap = <&regmapnode>;
+        offset = <0x0>;
+        mask = <0x7a>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
new file mode 100644
index 0000000000..9b1ffceefe
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON reboot mode driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This driver gets reboot mode magic value from reboot-mode driver
+  and stores it in a SYSCON mapped register. Then the bootloader
+  can read it and take different action according to the magic
+  value stored. The SYSCON mapped register is retrieved from the
+  parental dt-node plus the offset. So the SYSCON reboot-mode node
+  should be represented as a sub-node of a "syscon", "simple-mfd" node.
+
+properties:
+  compatible:
+    const: syscon-reboot-mode
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit)
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the mode register (in bytes)
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+additionalProperties: false
+
+required:
+  - compatible
+  - offset
+
+examples:
+  - |
+    #include <dt-bindings/soc/rockchip,boot-mode.h>
+
+    reboot-mode {
+      compatible = "syscon-reboot-mode";
+      offset = <0x40>;
+      mode-normal = <BOOT_NORMAL>;
+      mode-recovery = <BOOT_RECOVERY>;
+      mode-bootloader = <BOOT_FASTBOOT>;
+      mode-loader = <BOOT_BL_DOWNLOAD>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
new file mode 100644
index 0000000000..75061124d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register reset driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+  This is a generic reset driver using syscon to map the reset register.
+  The reset is generally performed with a write to the reset register
+  defined by the SYSCON register map base plus the offset with the value and
+  mask defined in the reboot node. Default will be little endian mode, 32 bit
+  access only. The SYSCON registers map is normally retrieved from the
+  parental dt-node. So the SYSCON reboot node should be represented as a
+  sub-node of a "syscon", "simple-mfd" node. Though the regmap property
+  pointing to the system controller node is also supported.
+
+properties:
+  compatible:
+    const: syscon-reboot
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit).
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the reboot register (in bytes).
+
+  regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description: |
+      Phandle to the register map node. This property is deprecated in favor of
+      the syscon-reboot node been a child of a system controller node.
+
+  value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The reset value written to the reboot register (32 bit access).
+
+  priority:
+    default: 192
+
+required:
+  - compatible
+  - offset
+
+additionalProperties: false
+
+allOf:
+  - $ref: restart-handler.yaml#
+  - if:
+      not:
+        required:
+          - mask
+    then:
+      required:
+        - value
+
+examples:
+  - |
+    reboot {
+        compatible = "syscon-reboot";
+        regmap = <&regmapnode>;
+        offset = <0x0>;
+        mask = <0x1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
new file mode 100644
index 0000000000..45792e2169
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq MPSoC Power Management
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  The zynqmp-power node describes the power management configurations.
+  It will control remote suspend/shutdown interfaces.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-power
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    description: |
+      Standard property to specify a Mailbox. Each value of
+      the mboxes property should contain a phandle to the
+      mailbox controller device node and an args specifier
+      that will be the phandle to the intended sub-mailbox
+      child node to be used for communication. See
+      Documentation/devicetree/bindings/mailbox/mailbox.txt
+      for more details about the generic mailbox controller
+      and client driver bindings. Also see
+      Documentation/devicetree/bindings/mailbox/ \
+      xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+      is used to communicate with this System controllers.
+    items:
+      - description: tx channel
+      - description: rx channel
+
+  mbox-names:
+    description:
+      Name given to channels seen in the 'mboxes' property.
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+
+    // Example with interrupt method:
+
+    firmware {
+      zynqmp-firmware {
+        zynqmp-power {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+      };
+    };
+
+  - |+
+
+    // Example with IPI mailbox method:
+
+    firmware {
+      zynqmp-firmware {
+        zynqmp-power {
+          compatible = "xlnx,zynqmp-power";
+          interrupt-parent = <&gic>;
+          interrupts = <0 35 4>;
+          mboxes = <&ipi_mailbox_pmu1 0>,
+                   <&ipi_mailbox_pmu1 1>;
+          mbox-names = "tx", "rx";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
new file mode 100644
index 0000000000..0d5e999a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  Rockchip processors include support for multiple power domains
+  which can be powered up/down by software based on different
+  application scenarios to save power.
+
+  Power domains contained within power-controller node are
+  generic power domain providers documented in
+  Documentation/devicetree/bindings/power/power-domain.yaml.
+
+  IP cores belonging to a power domain should contain a
+  "power-domains" property that is a phandle for the
+  power domain node representing the domain.
+
+properties:
+  $nodename:
+    const: power-controller
+
+  compatible:
+    enum:
+      - rockchip,px30-power-controller
+      - rockchip,rk3036-power-controller
+      - rockchip,rk3066-power-controller
+      - rockchip,rk3128-power-controller
+      - rockchip,rk3188-power-controller
+      - rockchip,rk3228-power-controller
+      - rockchip,rk3288-power-controller
+      - rockchip,rk3328-power-controller
+      - rockchip,rk3366-power-controller
+      - rockchip,rk3368-power-controller
+      - rockchip,rk3399-power-controller
+      - rockchip,rk3568-power-controller
+      - rockchip,rk3588-power-controller
+      - rockchip,rv1126-power-controller
+
+  "#power-domain-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^power-domain@[0-9a-f]+$":
+
+    $ref: "#/$defs/pd-node"
+
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+
+        $ref: "#/$defs/pd-node"
+
+        unevaluatedProperties: false
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+
+            $ref: "#/$defs/pd-node"
+
+            unevaluatedProperties: false
+
+            properties:
+              "#power-domain-cells":
+                const: 0
+
+$defs:
+  pd-node:
+    type: object
+    description: |
+      Represents the power domains within the power controller node.
+
+    properties:
+      reg:
+        maxItems: 1
+        description: |
+          Power domain index. Valid values are defined in
+          "include/dt-bindings/power/px30-power.h"
+          "include/dt-bindings/power/rk3036-power.h"
+          "include/dt-bindings/power/rk3066-power.h"
+          "include/dt-bindings/power/rk3128-power.h"
+          "include/dt-bindings/power/rk3188-power.h"
+          "include/dt-bindings/power/rk3228-power.h"
+          "include/dt-bindings/power/rk3288-power.h"
+          "include/dt-bindings/power/rk3328-power.h"
+          "include/dt-bindings/power/rk3366-power.h"
+          "include/dt-bindings/power/rk3368-power.h"
+          "include/dt-bindings/power/rk3399-power.h"
+          "include/dt-bindings/power/rk3568-power.h"
+          "include/dt-bindings/power/rk3588-power.h"
+          "include/dt-bindings/power/rockchip,rv1126-power.h"
+
+      clocks:
+        minItems: 1
+        maxItems: 30
+        description: |
+          A number of phandles to clocks that need to be enabled
+          while power domain switches state.
+
+      pm_qos:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
+        description: |
+          A number of phandles to qos blocks which need to be saved and restored
+          while power domain switches state.
+
+      "#power-domain-cells":
+        enum: [0, 1]
+        description:
+          Must be 0 for nodes representing a single PM domain and 1 for nodes
+          providing multiple PM domains.
+
+    required:
+      - reg
+      - "#power-domain-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qos_hdcp: qos@ffa90000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa90000 0x0 0x20>;
+        };
+
+        qos_iep: qos@ffa98000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa98000 0x0 0x20>;
+        };
+
+        qos_rga_r: qos@ffab0000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab0000 0x0 0x20>;
+        };
+
+        qos_rga_w: qos@ffab0080 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab0080 0x0 0x20>;
+        };
+
+        qos_video_m0: qos@ffab8000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffab8000 0x0 0x20>;
+        };
+
+        qos_video_m1_r: qos@ffac0000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffac0000 0x0 0x20>;
+        };
+
+        qos_video_m1_w: qos@ffac0080 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffac0080 0x0 0x20>;
+        };
+
+        power-management@ff310000 {
+            compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+            reg = <0x0 0xff310000 0x0 0x1000>;
+
+            power-controller {
+                compatible = "rockchip,rk3399-power-controller";
+                #power-domain-cells = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* These power domains are grouped by VD_CENTER */
+                power-domain@RK3399_PD_IEP {
+                    reg = <RK3399_PD_IEP>;
+                    clocks = <&cru ACLK_IEP>,
+                             <&cru HCLK_IEP>;
+                    pm_qos = <&qos_iep>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_RGA {
+                    reg = <RK3399_PD_RGA>;
+                    clocks = <&cru ACLK_RGA>,
+                             <&cru HCLK_RGA>;
+                    pm_qos = <&qos_rga_r>,
+                             <&qos_rga_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VCODEC {
+                    reg = <RK3399_PD_VCODEC>;
+                    clocks = <&cru ACLK_VCODEC>,
+                             <&cru HCLK_VCODEC>;
+                    pm_qos = <&qos_video_m0>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VDU {
+                    reg = <RK3399_PD_VDU>;
+                    clocks = <&cru ACLK_VDU>,
+                             <&cru HCLK_VDU>;
+                    pm_qos = <&qos_video_m1_r>,
+                             <&qos_video_m1_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain@RK3399_PD_VIO {
+                    reg = <RK3399_PD_VIO>;
+                    #power-domain-cells = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    power-domain@RK3399_PD_HDCP {
+                        reg = <RK3399_PD_HDCP>;
+                        clocks = <&cru ACLK_HDCP>,
+                                 <&cru HCLK_HDCP>,
+                                 <&cru PCLK_HDCP>;
+                        pm_qos = <&qos_hdcp>;
+                        #power-domain-cells = <0>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
new file mode 100644
index 0000000000..d71fc72d44
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
@@ -0,0 +1,390 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SRAM for IO Voltage Domains
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  IO domain voltages on some Rockchip SoCs are variable but need to be
+  kept in sync between the regulators and the SoC using a special
+  register.
+
+  A specific example using rk3288
+    If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+    bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
+    that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+  Said another way, this driver simply handles keeping bits in the SoCs
+  General Register File (GRF) in sync with the actual value of a voltage
+  hooked up to the pins.
+
+  Note that this driver specifically does not include
+    any logic for deciding what voltage we should set regulators to
+    any logic for deciding whether regulators (or internal SoC blocks)
+    should have power or not have power
+
+  If there were some other software that had the smarts of making
+  decisions about regulators, it would work in conjunction with this
+  driver. When that other software adjusted a regulators voltage then
+  this driver would handle telling the SoC about it. A good example is
+  vqmmc for SD. In that case the dw_mmc driver simply is told about a
+  regulator. It changes the regulator between 3.3V and 1.8V at the
+  right time. This driver notices the change and makes sure that the
+  SoC is on the same page.
+
+  You specify supplies using the standard regulator bindings by including
+  a phandle the relevant regulator. All specified supplies must be able
+  to report their voltage. The IO Voltage Domain for any non-specified
+  supplies will be not be touched.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-io-voltage-domain
+      - rockchip,px30-pmu-io-voltage-domain
+      - rockchip,rk3188-io-voltage-domain
+      - rockchip,rk3228-io-voltage-domain
+      - rockchip,rk3288-io-voltage-domain
+      - rockchip,rk3328-io-voltage-domain
+      - rockchip,rk3368-io-voltage-domain
+      - rockchip,rk3368-pmu-io-voltage-domain
+      - rockchip,rk3399-io-voltage-domain
+      - rockchip,rk3399-pmu-io-voltage-domain
+      - rockchip,rk3568-pmu-io-voltage-domain
+      - rockchip,rv1108-io-voltage-domain
+      - rockchip,rv1108-pmu-io-voltage-domain
+      - rockchip,rv1126-pmu-io-voltage-domain
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: "#/$defs/px30"
+  - $ref: "#/$defs/px30-pmu"
+  - $ref: "#/$defs/rk3188"
+  - $ref: "#/$defs/rk3228"
+  - $ref: "#/$defs/rk3288"
+  - $ref: "#/$defs/rk3328"
+  - $ref: "#/$defs/rk3368"
+  - $ref: "#/$defs/rk3368-pmu"
+  - $ref: "#/$defs/rk3399"
+  - $ref: "#/$defs/rk3399-pmu"
+  - $ref: "#/$defs/rk3568-pmu"
+  - $ref: "#/$defs/rv1108"
+  - $ref: "#/$defs/rv1108-pmu"
+  - $ref: "#/$defs/rv1126-pmu"
+
+$defs:
+  px30:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio-oscgpi-supply:
+          description: The supply connected to VCCIO_OSCGPI.
+
+  px30-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+        pmuio2-supply:
+          description: The supply connected to PMUIO2.
+
+  rk3188:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3188-io-voltage-domain
+
+    then:
+      properties:
+        ap0-supply:
+          description: The supply connected to AP0_VCC.
+        ap1-supply:
+          description: The supply connected to AP1_VCC.
+        cif-supply:
+          description: The supply connected to CIF_VCC.
+        flash-supply:
+          description: The supply connected to FLASH_VCC.
+        lcdc0-supply:
+          description: The supply connected to LCD0_VCC.
+        lcdc1-supply:
+          description: The supply connected to LCD1_VCC.
+        vccio0-supply:
+          description: The supply connected to VCCIO0.
+        vccio1-supply:
+          description: The supply connected to VCCIO1. Also labeled as VCCIO2.
+
+  rk3228:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3228-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+
+  rk3288:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-io-voltage-domain
+
+    then:
+      properties:
+        audio-supply:
+          description: The supply connected to APIO4_VDD.
+        bb-supply:
+          description: The supply connected to APIO5_VDD.
+        dvp-supply:
+          description: The supply connected to DVPIO_VDD.
+        flash0-supply:
+          description: The supply connected to FLASH0_VDD. Typically for eMMC.
+        flash1-supply:
+          description: The supply connected to FLASH1_VDD. Also known as SDIO1.
+        gpio30-supply:
+          description: The supply connected to APIO1_VDD.
+        gpio1830-supply:
+          description: The supply connected to APIO2_VDD.
+        lcdc-supply:
+          description: The supply connected to LCDC_VDD.
+        sdcard-supply:
+          description: The supply connected to SDMMC0_VDD.
+        wifi-supply:
+          description: The supply connected to APIO3_VDD. Also known as SDIO0.
+
+  rk3328:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        pmuio-supply:
+          description: The supply connected to VCCIO_PMU.
+
+  rk3368:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3368-io-voltage-domain
+
+    then:
+      properties:
+        audio-supply:
+          description: The supply connected to APIO3_VDD.
+        dvp-supply:
+          description: The supply connected to DVPIO_VDD.
+        flash0-supply:
+          description: The supply connected to FLASH0_VDD. Typically for eMMC.
+        gpio30-supply:
+          description: The supply connected to APIO1_VDD.
+        gpio1830-supply:
+          description: The supply connected to APIO4_VDD.
+        sdcard-supply:
+          description: The supply connected to SDMMC0_VDD.
+        wifi-supply:
+          description: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+  rk3368-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3368-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmu-supply:
+          description: The supply connected to PMUIO_VDD.
+        vop-supply:
+          description: The supply connected to LCDC_VDD.
+
+  rk3399:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-io-voltage-domain
+
+    then:
+      properties:
+        audio-supply:
+          description: The supply connected to APIO5_VDD.
+        bt656-supply:
+          description: The supply connected to APIO2_VDD.
+        gpio1830-supply:
+          description: The supply connected to APIO4_VDD.
+        sdmmc-supply:
+          description: The supply connected to SDMMC0_VDD.
+
+  rk3399-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmu1830-supply:
+          description: The supply connected to PMUIO2_VDD.
+
+  rk3568-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+        pmuio2-supply:
+          description: The supply connected to PMUIO2.
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio7-supply:
+          description: The supply connected to VCCIO7.
+
+  rv1108:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1108-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to APIO1_VDD.
+        vccio2-supply:
+          description: The supply connected to APIO2_VDD.
+        vccio3-supply:
+          description: The supply connected to APIO3_VDD.
+        vccio5-supply:
+          description: The supply connected to APIO5_VDD.
+        vccio6-supply:
+          description: The supply connected to APIO6_VDD.
+
+  rv1108-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1108-pmu-io-voltage-domain
+
+    then:
+      properties:
+        pmu-supply:
+          description: The supply connected to PMUIO_VDD.
+
+  rv1126-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1126-pmu-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio7-supply:
+          description: The supply connected to VCCIO7.
+        pmuio0-supply:
+          description: The supply connected to PMUIO0.
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+
+examples:
+  - |
+    io-domains {
+      compatible = "rockchip,rk3288-io-voltage-domain";
+      audio-supply = <&vcc18_codec>;
+      bb-supply = <&vcc33_io>;
+      dvp-supply = <&vcc_18>;
+      flash0-supply = <&vcc18_flashio>;
+      gpio1830-supply = <&vcc33_io>;
+      gpio30-supply = <&vcc33_pmuio>;
+      lcdc-supply = <&vcc33_lcd>;
+      sdcard-supply = <&vccio_sd>;
+      wifi-supply = <&vcc18_wl>;
+    };
diff --git a/Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml b/Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml
new file mode 100644
index 0000000000..98eb8b4110
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/starfive,jh7110-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Power Management Unit
+
+maintainers:
+  - Walker Chen <walker.chen@starfivetech.com>
+
+description: |
+  StarFive JH7110 SoC includes support for multiple power domains which can be
+  powered on/off by software based on different application scenes to save power.
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7110-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pwrc: power-controller@17030000 {
+        compatible = "starfive,jh7110-pmu";
+        reg = <0x17030000 0x10000>;
+        interrupts = <111>;
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
new file mode 100644
index 0000000000..5220d9cb16
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945A Charger Function
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: active-semi,act8945a-charger
+
+  interrupts:
+    maxItems: 1
+
+  active-semi,chglev-gpios:
+    maxItems: 1
+    description: charge current level GPIO
+
+  active-semi,lbo-gpios:
+    maxItems: 1
+    description: low battery voltage detect GPIO
+
+  active-semi,input-voltage-threshold-microvolt:
+    description: |
+      Specifies the charger's input over-voltage threshold value.
+      Despite the name, specified values are in millivolt (mV).
+      Defaults to 6.6 V
+    enum: [ 6600, 7000, 7500, 8000 ]
+
+  active-semi,precondition-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's PRECONDITION safety timer setting value in minutes.
+      If 0, it means to disable this timer.
+      Defaults to 40 minutes.
+    enum: [ 0, 40, 60, 80 ]
+
+  active-semi,total-timeout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the charger's total safety timer setting value in hours;
+      If 0, it means to disable this timer;
+      Defaults to 3 hours.
+    enum: [ 0, 3, 4, 5 ]
+
+required:
+  - compatible
+  - interrupts
+  - active-semi,chglev-gpios
+  - active-semi,lbo-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "active-semi,act8945a-charger";
+        interrupt-parent = <&pioA>;
+        interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+        active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+        active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+        active-semi,input-voltage-threshold-microvolt = <6600>;
+        active-semi,precondition-timeout = <40>;
+        active-semi,total-timeout = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/adc-battery.yaml b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml
new file mode 100644
index 0000000000..ed9702caed
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/adc-battery.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/adc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  Basic battery capacity meter, which only reports basic battery data
+  via ADC channels and optionally indicate that the battery is full by
+  polling a GPIO line.
+
+  The voltage is expected to be measured between the battery terminals
+  and mandatory. The optional current/power channel is expected to
+  monitor the current/power flowing out of the battery. Last but not
+  least the temperature channel is supposed to measure the battery
+  temperature.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: adc-battery
+
+  charged-gpios:
+    description:
+      GPIO which signals that the battery is fully charged. The GPIO is
+      often provided by charger ICs, that are not software controllable.
+    maxItems: 1
+
+  io-channels:
+    minItems: 1
+    maxItems: 4
+
+  io-channel-names:
+    minItems: 1
+    items:
+      - const: voltage
+      - enum: [ current, power, temperature ]
+      - enum: [ power, temperature ]
+      - const: temperature
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    fuel-gauge {
+        compatible = "adc-battery";
+        charged-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+        io-channels = <&adc 13>, <&adc 37>;
+        io-channel-names = "voltage", "current";
+
+        power-supplies = <&charger>;
+        monitored-battery = <&battery>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
new file mode 100644
index 0000000000..491488e7b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Characteristics
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The devicetree battery node provides static battery characteristics.
+  In smart batteries, these are typically stored in non-volatile memory
+  on a fuel gauge chip. The battery node should be used where there is
+  no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+  Upstream dts files should not include battery nodes, unless the battery
+  represented cannot easily be replaced in the system by one of a
+  different type. This prevents unpredictable, potentially harmful,
+  behavior should a replacement that changes the battery type occur
+  without a corresponding update to the dtb.
+
+  Battery properties are named, where possible, for the corresponding elements
+  in enum power_supply_property, defined in include/linux/power_supply.h
+
+  Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
+  The phandle's property should be named "monitored-battery".
+
+properties:
+  compatible:
+    const: simple-battery
+
+  device-chemistry:
+    description: This describes the chemical technology of the battery.
+    oneOf:
+      - const: nickel-cadmium
+      - const: nickel-metal-hydride
+      - const: lithium-ion
+        description: This is a blanket type for all lithium-ion batteries,
+          including those below. If possible, a precise compatible string
+          from below should be used, but sometimes it is unknown which specific
+          lithium ion battery is employed and this wide compatible can be used.
+      - const: lithium-ion-polymer
+      - const: lithium-ion-iron-phosphate
+      - const: lithium-ion-manganese-oxide
+
+  over-voltage-threshold-microvolt:
+    description: battery over-voltage limit
+
+  re-charge-voltage-microvolt:
+    description: limit to automatically start charging again
+
+  voltage-min-design-microvolt:
+    description: drained battery voltage
+
+  voltage-max-design-microvolt:
+    description: fully charged battery voltage
+
+  energy-full-design-microwatt-hours:
+    description: battery design energy
+
+  charge-full-design-microamp-hours:
+    description: battery design capacity
+
+  trickle-charge-current-microamp:
+    description: current for trickle-charge phase
+
+  precharge-current-microamp:
+    description: current for pre-charge phase
+
+  precharge-upper-limit-microvolt:
+    description: limit when to change to constant charging
+
+  charge-term-current-microamp:
+    description: current for charge termination phase
+
+  constant-charge-current-max-microamp:
+    description: maximum constant input current
+
+  constant-charge-voltage-max-microvolt:
+    description: maximum constant input voltage
+
+  factory-internal-resistance-micro-ohms:
+    description: battery factory internal resistance
+
+  resistance-temp-table:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: the temperature in degree Celsius
+        - description: battery internal resistance percent
+    description: |
+      A table providing the temperature in degree Celsius
+      and corresponding battery internal resistance percent, which is used to
+      look up the resistance percent according to current temperature to get an
+      accurate batterty internal resistance in different temperatures.
+
+  ocv-capacity-celsius:
+    description: |
+      An array containing the temperature in degree Celsius,
+      for each of the battery capacity lookup table.
+
+  operating-range-celsius:
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
+required:
+  - compatible
+
+patternProperties:
+  '^ocv-capacity-table-[0-9]+$':
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      An array providing the open circuit voltage (OCV)
+      of the battery and corresponding battery capacity percent, which is used
+      to look up battery capacity according to current OCV value. And the open
+      circuit voltage unit is microvolt.
+    maxItems: 100
+    items:
+      items:
+        - description: open circuit voltage (OCV) in microvolts
+        - description: battery capacity percent
+          maximum: 100
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "simple-battery";
+        over-voltage-threshold-microvolt = <4500000>;
+        re-charge-voltage-microvolt = <250000>;
+        voltage-min-design-microvolt = <3200000>;
+        voltage-max-design-microvolt = <4200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+        precharge-current-microamp = <256000>;
+        precharge-upper-limit-microvolt = <2500000>;
+        charge-term-current-microamp = <128000>;
+        constant-charge-current-max-microamp = <900000>;
+        constant-charge-voltage-max-microvolt = <4200000>;
+        factory-internal-resistance-micro-ohms = <250000>;
+        ocv-capacity-celsius = <(-10) 0 10>;
+        /* table for -10 degree Celsius */
+        ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>;
+        /* table for 0 degree Celsius */
+        ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>;
+        /* table for 10 degree Celsius */
+        ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
+        resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+
+      fuel-gauge@22 {
+        reg = <0x22>;
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
new file mode 100644
index 0000000000..13822346e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2415x Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24150
+      - ti,bq24150a
+      - ti,bq24151
+      - ti,bq24151a
+      - ti,bq24152
+      - ti,bq24153
+      - ti,bq24153a
+      - ti,bq24155
+      - ti,bq24156
+      - ti,bq24156a
+      - ti,bq24158
+
+  reg:
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: initial maximum current charger can pull from power supply in mA.
+
+  ti,weak-battery-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      weak battery voltage threshold in mV.
+      The chip will use slow precharge if battery voltage is below this value.
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in mV.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in mA.
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase drops
+      below this value (in mA).
+
+  ti,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: value of sensing resistor in milliohm.
+
+  ti,usb-charger-detection:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to usb charger detection device (required for auto mode)
+
+required:
+  - compatible
+  - reg
+  - ti,current-limit
+  - ti,weak-battery-voltage
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,resistor-sense
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq24150a";
+        reg = <0x6b>;
+
+        ti,current-limit = <100>;
+        ti,weak-battery-voltage = <3400>;
+        ti,battery-regulation-voltage = <4200>;
+        ti,charge-current = <650>;
+        ti,termination-current = <100>;
+        ti,resistor-sense = <68>;
+
+        ti,usb-charger-detection = <&isp1704>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
new file mode 100644
index 0000000000..d3ebc9de8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24190
+      - ti,bq24192
+      - ti,bq24192i
+      - ti,bq24196
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: |
+      Regulator that is used to control the VBUS voltage direction for
+      either USB host mode or for charging on the OTG port
+
+  ti,system-minimum-microvolt:
+    description: |
+      when power is connected and the battery is below minimum system voltage,
+      the system will be regulated above this setting.
+
+  omit-battery-class:
+    type: boolean
+    description: |
+      If this property is set, the operating system does not try to create a
+      battery device.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - precharge-current-microamp: maximum charge current during precharge phase
+                                    (typically 20% of battery capacity).
+      - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+                                      above recharge threshold, and the current is below this
+                                      setting (typically 10% of battery capacity).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bat: battery {
+      compatible = "simple-battery";
+      precharge-current-microamp = <256000>;
+      charge-term-current-microamp = <128000>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24190";
+        reg = <0x6a>;
+        interrupt-parent = <&gpiochip>;
+        interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+        monitored-battery = <&bat>;
+        ti,system-minimum-microvolt = <3200000>;
+
+        usb_otg_vbus: usb-otg-vbus { };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
new file mode 100644
index 0000000000..eb064bbf87
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bq24250, bq24251 and bq24257 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq24250
+      - ti,bq24251
+      - ti,bq24257
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage in uV
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current in uA
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  pg-gpios:
+    description: |
+      GPIO used for connecting the bq2425x device PG (Power Good) pin.
+      This pin is not available on all devices however it should be used if
+      possible as this is the recommended way to obtain the charger's input PG
+      state. If this pin is not specified a software-based approach for PG
+      detection is used.
+    maxItems: 1
+
+  ti,current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The maximum current to be drawn from the charger's input (in uA).
+      If this property is not specified, the input limit current is set
+      automatically using USB D+/D- signal based charger type detection.
+      If the hardware does not support the D+/D- based detection, a default
+      of 500,000 is used (=500mA) instead.
+
+  ti,ovp-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the over voltage protection voltage (in uV).
+      If not specified a default of 6,5000,000 (=6.5V) is used.
+
+  ti,in-dpm-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configures the threshold input voltage for the dynamic power path management (in uV).
+      If not specified a default of 4,360,000 (=4.36V) is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24257";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+      };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq24250";
+        reg = <0x6a>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <500000>;
+        ti,termination-current = <50000>;
+        ti,current-limit = <900000>;
+        ti,ovp-voltage = <9500000>;
+        ti,in-dpm-voltage = <4440000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
new file mode 100644
index 0000000000..af41e7ccd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,bq24735
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: AC adapter plug event interrupt
+    maxItems: 1
+
+  ti,ac-detect-gpios:
+    maxItems: 1
+    description: |
+      This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+      that is configured as an input and connected to the ACOK pin on the bq24735.
+      Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+      absence despite ACOK being active (high) on AC adapter presence.
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging current.
+      This value must be between 128mA and 8.128A with a 64mA step resolution.
+      The POR value is 0x0000h. This number is in mA (e.g. 8192).
+      See spec for more information about the ChargeCurrent (0x14h) register.
+
+  ti,charge-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charging voltage.
+      This value must be between 1.024V and 19.2V with a 16mV step resolution.
+      The POR value is 0x0000h. This number is in mV (e.g. 19200).
+      See spec for more information about the ChargeVoltage (0x15h) register.
+
+  ti,input-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Used to control and set the charger input current.
+      This value must be between 128mA and 8.064A with a 128mA step resolution.
+      The POR value is 0x1000h. This number is in mA (e.g. 8064).
+      See the spec for more information about the InputCurrent (0x3fh) register.
+
+  ti,external-control:
+    type: boolean
+    description: |
+      Indicates that the charger is configured externally and that the host should not
+      attempt to enable/disable charging or set the charge voltage/current.
+
+  poll-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@9 {
+        compatible = "ti,bq24735";
+        reg = <0x9>;
+        ti,ac-detect-gpios = <&gpio 72 0x1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
new file mode 100644
index 0000000000..845822c87f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The BQ2515x family is a highly integrated battery charge management IC that
+  integrates the most common functions for wearable devices, namely a charger,
+  an output voltage rail, ADC for battery and system monitoring, and
+  push-button controller.
+
+  Specifications about the charger can be found at:
+    http://www.ti.com/lit/ds/symlink/bq25150.pdf
+    http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25150
+      - ti,bq25155
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  ac-detect-gpios:
+    description: |
+       GPIO used for connecting the bq2515x device PG (AC Detect)
+       pin.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for hardware reset.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO used for low power mode of IC.
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  input-current-limit-microamp:
+    description: Maximum input current in micro Amps.
+    minimum: 50000
+    maximum: 500000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <50000>;
+      precharge-current-microamp = <2500>;
+      constant-charge-voltage-max-microvolt = <4000000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25150: charger@6b {
+        compatible = "ti,bq25150";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+        input-current-limit-microamp = <100000>;
+
+        ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+        powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+        charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
new file mode 100644
index 0000000000..a76afe3ca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq256xx Switch Mode Buck Charger
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The bq256xx devices are a family of highly-integrated battery charge
+  management and system power management ICs for single cell Li-ion and Li-
+  polymer batteries.
+
+  Datasheets:
+    - https://www.ti.com/lit/ds/symlink/bq25600.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25601.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25618.pdf
+    - https://www.ti.com/lit/ds/symlink/bq25619.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25600
+      - ti,bq25601
+      - ti,bq25600d
+      - ti,bq25601d
+      - ti,bq25611d
+      - ti,bq25618
+      - ti,bq25619
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    default: 0
+    description: |
+      Watchdog timer in ms. 0 (default) disables the watchdog
+    minimum: 0
+    maximum: 160000
+    enum: [ 0, 40000, 80000, 160000]
+
+  input-voltage-limit-microvolt:
+    description: |
+       Minimum input voltage limit in µV with a 100000 µV step
+    minimum: 3900000
+    maximum: 5400000
+
+  input-current-limit-microamp:
+    description: |
+       Maximum input current limit in µA with a 100000 µA step
+    minimum: 100000
+    maximum: 3200000
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Interrupt sends an active low, 256 μs pulse to host to report the charger
+      device status and faults.
+
+  ti,no-thermistor:
+    type: boolean
+    description: Indicates that no thermistor is connected to the TS pin
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <2040000>;
+      constant-charge-voltage-max-microvolt = <4352000>;
+      precharge-current-microamp = <180000>;
+      charge-term-current-microamp = <180000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+
+      clock-frequency = <400000>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "ti,bq25601";
+        reg = <0x6b>;
+        monitored-battery = <&bat>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+        ti,watchdog-timeout-ms = <40000>;
+
+        input-voltage-limit-microvolt = <4500000>;
+        input-current-limit-microamp = <2400000>;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
new file mode 100644
index 0000000000..0ad302ab2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,bq25890
+      - items:
+          - enum:
+              - ti,bq25892
+              - ti,bq25895
+              - ti,bq25896
+          - const: ti,bq25890
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging voltage (in uV)
+
+  ti,charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charging current (in uA)
+
+  ti,termination-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      charge will be terminated when current in constant-voltage phase
+      drops below this value (in uA)
+
+  ti,precharge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum charge current during precharge phase (in uA)
+
+  ti,minimum-sys-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      when battery is charging and it is below minimum system voltage,
+      the system will be regulated above minimum-sys-voltage setting (in uV)
+
+  ti,boost-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: VBUS voltage level in boost mode (in uV)
+
+  ti,boost-max-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum allowed current draw in boost mode (in uA)
+
+  ti,boost-low-freq:
+    description: boost mode frequency will be 500kHz, otherwise 1.5MHz
+    type: boolean
+
+  ti,use-ilim-pin:
+    description: |
+      ILIM resistor will be used and the input current will be the lower
+      between the resistor setting and the IINLIM register setting
+    type: boolean
+
+  ti,thermal-regulation-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      temperature above which the charge current is lowered, to avoid overheating
+      (in degrees Celsius). If omitted, the default setting will be used (120 degrees)
+
+  ti,ibatcomp-micro-ohms:
+    description: value of a resistor in series with the battery (in Micro Ohms)
+
+  ti,ibatcomp-clamp-microvolt:
+    description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,battery-regulation-voltage
+  - ti,charge-current
+  - ti,termination-current
+  - ti,precharge-current
+  - ti,minimum-sys-voltage
+  - ti,boost-voltage
+  - ti,boost-max-current
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6a {
+        compatible = "ti,bq25890";
+        reg = <0x6a>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+        ti,battery-regulation-voltage = <4200000>;
+        ti,charge-current = <1000000>;
+        ti,termination-current = <50000>;
+        ti,precharge-current = <128000>;
+        ti,minimum-sys-voltage = <3600000>;
+        ti,boost-voltage = <5000000>;
+        ti,boost-max-current = <1000000>;
+
+        ti,use-ilim-pin;
+        ti,thermal-regulation-threshold = <120>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
new file mode 100644
index 0000000000..b70ce8d7f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+  for use in high-power density portable electronics. These inductorless
+  switching chargers can provide over 97% efficiency by making use of the
+  switched capacitor architecture.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25980
+      - ti,bq25975
+      - ti,bq25960
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    description: |
+      Watchdog timer in milli seconds. 0 disables the watchdog.
+    default: 0
+    minimum: 0
+    maximum: 300000
+    enum: [ 0, 5000, 10000, 50000, 300000]
+
+  ti,sc-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 100000 micro volt step.
+    default: 17800000
+    minimum: 14000000
+    maximum: 22000000
+
+  ti,sc-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 50000 micro volt step.
+    minimum: 7000000
+    maximum: 12750000
+
+  ti,bypass-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-enable:
+    type: boolean
+    description: Enables bypass mode at boot time
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Indicates that the device state has changed.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <4000000>;
+      constant-charge-voltage-max-microvolt = <8400000>;
+      precharge-current-microamp = <160000>;
+      charge-term-current-microamp = <160000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25980: charger@65 {
+          compatible = "ti,bq25980";
+          reg = <0x65>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+          ti,watchdog-timeout-ms = <0>;
+          ti,sc-ocp-limit-microamp = <2000000>;
+          ti,sc-ovp-limit-microvolt = <17800000>;
+          monitored-battery = <&bat>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
new file mode 100644
index 0000000000..309ea33b5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Andrew F. Davis <afd@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Support various Texas Instruments fuel gauge devices that share similar
+  register maps and power supply properties
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq27200
+      - ti,bq27210
+      - ti,bq27500 # deprecated, use revision specific property below
+      - ti,bq27510 # deprecated, use revision specific property below
+      - ti,bq27520 # deprecated, use revision specific property below
+      - ti,bq27500-1
+      - ti,bq27510g1
+      - ti,bq27510g2
+      - ti,bq27510g3
+      - ti,bq27520g1
+      - ti,bq27520g2
+      - ti,bq27520g3
+      - ti,bq27520g4
+      - ti,bq27521
+      - ti,bq27530
+      - ti,bq27531
+      - ti,bq27541
+      - ti,bq27542
+      - ti,bq27546
+      - ti,bq27742
+      - ti,bq27545
+      - ti,bq27411
+      - ti,bq27421
+      - ti,bq27425
+      - ti,bq27426
+      - ti,bq27441
+      - ti,bq27621
+      - ti,bq27z561
+      - ti,bq28z610
+      - ti,bq34z100
+      - ti,bq78z100
+
+  reg:
+    maxItems: 1
+    description: integer, I2C address of the fuel gauge.
+
+  monitored-battery:
+    description: |
+       The fuel gauge uses the following battery properties:
+       - energy-full-design-microwatt-hours
+       - charge-full-design-microamp-hours
+       - voltage-min-design-microvolt
+       Both or neither of the *-full-design-*-hours properties must be set.
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      voltage-min-design-microvolt = <3200000>;
+      energy-full-design-microwatt-hours = <5290000>;
+      charge-full-design-microamp-hours = <1430000>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq27510g3: fuel-gauge@55 {
+        compatible = "ti,bq27510g3";
+        reg = <0x55>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
new file mode 100644
index 0000000000..5af1e0beaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Binding for the legacy charger manager driver.
+  Please do not use for new products.
+
+properties:
+  compatible:
+    const: charger-manager
+
+  cm-chargers:
+    description: name of chargers
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  cm-num-chargers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+  cm-fuel-gauge:
+    description: name of battery fuel gauge
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-name:
+    description: name of the charger manager
+    default: battery
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-poll-mode:
+    description: polling mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    enum:
+      - 0 # disabled
+      - 1 # always
+      - 2 # when external power is connected
+      - 3 # when charging
+
+  cm-poll-interval:
+    description: polling interval (in ms)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-stat:
+    description: battery status
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # battery always present
+      - 1 # no battery
+      - 2 # check presence via fuel gauge
+      - 3 # check presence via charger
+
+  cm-fullbatt-vchkdrop-volt:
+    description: voltage drop before restarting charging in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-vchkdrop-ms:
+    deprecated: true
+
+  cm-fullbatt-voltage:
+    description: voltage of full battery in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-soc:
+    description: state of charge to consider as full battery in %
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-fullbatt-capacity:
+    description: capcity to consider as full battery in uAh
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-thermal-zone:
+    description: name of external thermometer's thermal zone
+    $ref: /schemas/types.yaml#/definitions/string
+
+  cm-discharging-max:
+    description: limits of discharging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-charging-max:
+    description: limits of charging duration in ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold:
+    description: critical cold temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-cold-in-minus:
+    description: if set cm-battery-cold temperature is in minus degrees
+    type: boolean
+
+  cm-battery-hot:
+    description: critical hot temperature of battery for charging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cm-battery-temp-diff:
+    description: temperature difference to allow recharging in deci-degree celsius
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "-supply$":
+    description: regulator consumer, named according to cm-regulator-name
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "^regulator[@-][0-9]$":
+    type: object
+    properties:
+      cm-regulator-name:
+        description: name of charger regulator
+        $ref: /schemas/types.yaml#/definitions/string
+
+    required:
+      - cm-regulator-name
+
+    additionalProperties: false
+
+    patternProperties:
+      "^cable[@-][0-9]$":
+        type: object
+        properties:
+          cm-cable-name:
+            description: name of charger cable
+            enum:
+              - USB
+              - USB-HOST
+              - SDP
+              - DCP
+              - CDP
+              - ACA
+              - FAST-CHARGER
+              - SLOW-CHARGER
+              - WPT
+              - PD
+              - DOCK
+              - JIG
+              - MECHANICAL
+
+          cm-cable-extcon:
+            description: name of extcon dev
+            $ref: /schemas/types.yaml#/definitions/string
+
+          cm-cable-min:
+            description: minimum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          cm-cable-max:
+            description: maximum current of cable in uA
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - cm-cable-name
+          - cm-cable-extcon
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - cm-chargers
+  - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+  - |
+    charger-manager {
+        compatible = "charger-manager";
+        chg-reg-supply = <&charger_regulator>;
+
+        cm-name = "battery";
+        /* Always polling ON : 30s */
+        cm-poll-mode = <1>;
+        cm-poll-interval = <30000>;
+
+        cm-fullbatt-vchkdrop-volt = <150000>;
+        cm-fullbatt-soc = <100>;
+
+        cm-battery-stat = <3>;
+
+        cm-chargers = "charger0", "charger1", "charger2";
+
+        cm-fuel-gauge = "fuelgauge0";
+
+        cm-thermal-zone = "thermal_zone.1";
+        /* in deci centigrade */
+        cm-battery-cold = <50>;
+        cm-battery-cold-in-minus;
+        cm-battery-hot = <800>;
+        cm-battery-temp-diff = <100>;
+
+        /* Allow charging for 5hr */
+        cm-charging-max = <18000000>;
+        /* Allow discharging for 2hr */
+        cm-discharging-max = <7200000>;
+
+        regulator-0 {
+            cm-regulator-name = "chg-reg";
+            cable-0 {
+                cm-cable-name = "USB";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <475000>;
+                cm-cable-max = <500000>;
+            };
+            cable-1 {
+                cm-cable-name = "SDP";
+                cm-cable-extcon = "extcon-dev.0";
+                cm-cable-min = <650000>;
+                cm-cable-max = <675000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
new file mode 100644
index 0000000000..694bfdb581
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC battery
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery fuel gauge
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,cpcap-battery
+
+  interrupts:
+    items:
+      - description: eol interrupt
+      - description: low battery percentage interrupt
+      - description: critical battery percentage interrupt
+      - description: charger detect interrupt
+      - description: battery detect interrupt
+      - description: coulomb counter calibration interrupt
+
+  interrupt-names:
+    items:
+      - const: eol
+      - const: lowbph
+      - const: lowbpl
+      - const: chrgcurr1
+      - const: battdetb
+      - const: cccal
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: chg_isense
+      - const: batti
+
+  power-supplies: true
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - power-supplies
+
+additionalProperties: false
+
+examples:
+  - |
+    cpcap {
+      battery {
+        compatible = "motorola,cpcap-battery";
+        interrupts-extended =
+                <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+                <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+        interrupt-names =
+                "eol", "lowbph", "lowbpl",
+                "chrgcurr1", "battdetb", "cccal";
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 5>, <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "chg_isense", "batti";
+        power-supplies = <&cpcap_charger>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
new file mode 100644
index 0000000000..7e6bf30a01
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC charger
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+  the Droid 4. This binding describes its battery charger
+  sub-function.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: motorola,mapphone-cpcap-charger
+
+  interrupts:
+    items:
+      - description: charger detection interrupt
+      - description: reverse charge interrupt
+      - description: SE1 charger detection interrupt
+      - description: SE0 charger detection interrupt
+      - description: reverse mode interrupt
+      - description: charge current 2 interrupt
+      - description: charge current 1 interrupt
+      - description: VBUS valid interrupt
+      - description: battery detect interrupt
+
+  interrupt-names:
+    items:
+      - const: chrg_det
+      - const: rvrs_chrg
+      - const: chrg_se1b
+      - const: se0conn
+      - const: rvrs_mode
+      - const: chrgcurr2
+      - const: chrgcurr1
+      - const: vbusvld
+      - const: battdetb
+
+  io-channels:
+    items:
+      - description: battery temperature
+      - description: battery voltage
+      - description: VBUS voltage
+      - description: battery charge current
+      - description: battery current
+
+  io-channel-names:
+    items:
+      - const: battdetb
+      - const: battp
+      - const: vbus
+      - const: chg_isense
+      - const: batti
+
+  mode-gpios:
+    description: |
+      Optionally CPCAP charger can have a companion wireless
+      charge controller that is controlled with two GPIOs
+      that are active low.
+    minItems: 2
+    maxItems: 2
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    cpcap {
+      charger {
+        compatible = "motorola,mapphone-cpcap-charger";
+        interrupts-extended =
+                <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>,
+                <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>,
+                <&cpcap 54 0>;
+        interrupt-names =
+                "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+                "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+                "battdetb";
+        mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+                     <&gpio3 23 GPIO_ACTIVE_LOW>;
+        io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+                      <&cpcap_adc 2>, <&cpcap_adc 5>,
+                      <&cpcap_adc 6>;
+        io-channel-names = "battdetb", "battp",
+                           "vbus", "chg_isense",
+                           "batti";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
new file mode 100644
index 0000000000..dc697b6147
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+  - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+  The driver can utilize information from a simple-battery linked via a
+  phandle in monitored-battery. If specified the driver uses the
+  charge-full-design-microamp-hours property of the battery.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: cellwise,cw2015
+
+  reg:
+    maxItems: 1
+
+  cellwise,battery-profile:
+    description: |
+      This property specifies characteristics of the battery used. The format
+      of this binary blob is kept secret by CellWise. The only way to obtain
+      it is to mail two batteries to a test facility of CellWise and receive
+      back a test report with the binary blob.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 64
+    maxItems: 64
+
+  cellwise,monitor-interval-ms:
+    description:
+      Specifies the interval in milliseconds gauge values are polled at
+    minimum: 250
+
+  power-supplies:
+    minItems: 1
+    maxItems: 8 # Should be enough
+
+  monitored-battery:
+    description:
+      Specifies the phandle of a simple-battery connected to this gauge
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cw2015@62 {
+            compatible = "cellwise,cw2015";
+            reg = <0x62>;
+            cellwise,battery-profile = /bits/ 8 <
+                0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+                0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+                0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+                0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+                0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+                0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+                0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+                0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+           >;
+           cellwise,monitor-interval-ms = <5000>;
+           monitored-battery = <&bat>;
+           power-supplies = <&mains_charger>, <&usb_charger>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
new file mode 100644
index 0000000000..85bebebb28
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Charger Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-charger
+
+  io-channels:
+    items:
+      - description: ADC channel for current
+      - description: ADC channel for bus voltage
+      - description: ADC channel for junction temperature
+      - description: ADC channel for battery voltage
+
+  io-channel-names:
+    items:
+      - const: CHAN_IBUS
+      - const: CHAN_VBUS
+      - const: CHAN_TJUNC
+      - const: CHAN_VBAT
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "dlg,da9150-charger";
+        io-channels = <&gpadc 0>,
+                      <&gpadc 2>,
+                      <&gpadc 8>,
+                      <&gpadc 5>;
+        io-channel-names = "CHAN_IBUS",
+                           "CHAN_VBUS",
+                           "CHAN_TJUNC",
+                           "CHAN_VBAT";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
new file mode 100644
index 0000000000..7cc94b8729
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: dlg,da9150-fuel-gauge
+
+  dlg,update-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Interval time (milliseconds) between battery level checks.
+
+  dlg,warn-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: Battery discharge level (%) where warning event raised.
+
+  dlg,crit-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 100
+    description: |
+      Battery discharge level (%) where critical event raised.
+      This value should be lower than the warning level.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      battery {
+        compatible = "dlg,da9150-fuel-gauge";
+        dlg,update-interval = <10000>;
+        dlg,warn-soc-level = /bits/ 8 <15>;
+        dlg,crit-soc-level = /bits/ 8 <5>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
new file mode 100644
index 0000000000..89f8e2bcb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: simple battery chargers only communicating through GPIOs
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  This binding is for all chargers, which are working more or less
+  autonomously, only providing some status GPIOs and possibly some
+  GPIOs for limited control over the charging process.
+
+properties:
+  compatible:
+    const: gpio-charger
+
+  charger-type:
+    enum:
+      - unknown
+      - battery
+      - ups
+      - mains
+      - usb-sdp                   # USB standard downstream port
+      - usb-dcp                   # USB dedicated charging port
+      - usb-cdp                   # USB charging downstream port
+      - usb-aca                   # USB accessory charger adapter
+    description:
+      Type of the charger, e.g. "mains" for a wall charger.
+
+  gpios:
+    maxItems: 1
+    description: GPIO indicating the charger presence
+
+  charge-status-gpios:
+    maxItems: 1
+    description: GPIO indicating the charging status
+
+  charge-current-limit-gpios:
+    minItems: 1
+    maxItems: 32
+    description: GPIOs used for current limiting
+
+  charge-current-limit-mapping:
+    description: List of tuples with current in uA and a GPIO bitmap (in
+      this order). The tuples must be provided in descending order of the
+      current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            Current limit in uA
+        - description:
+            Encoded GPIO setting. Bit 0 represents last GPIO from the
+            charge-current-limit-gpios property. Bit 1 second to last
+            GPIO and so on.
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - gpios
+  - required:
+      - charge-status-gpios
+  - required:
+      - charge-current-limit-gpios
+
+dependencies:
+  charge-current-limit-gpios: [ charge-current-limit-mapping ]
+  charge-current-limit-mapping: [ charge-current-limit-gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    charger {
+      compatible = "gpio-charger";
+      charger-type = "usb-sdp";
+
+      gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+      charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+      charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+                                   <&gpioA 12 GPIO_ACTIVE_HIGH>;
+      charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+                                     <700000 0x01>, // 700 mA => GPIO A.12 high
+                                     <0 0x02>; // 0 mA => GPIO A.11 high
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
new file mode 100644
index 0000000000..741022b444
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx battery
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+$ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ingenic,jz4740-battery
+      - items:
+          - enum:
+              - ingenic,jz4725b-battery
+              - ingenic,jz4770-battery
+          - const: ingenic,jz4740-battery
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: battery
+
+  monitored-battery:
+    description: >
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - voltage-min-design-microvolt: drained battery voltage,
+      - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    simple_battery: battery {
+            compatible = "simple-battery";
+            voltage-min-design-microvolt = <3600000>;
+            voltage-max-design-microvolt = <4200000>;
+    };
+
+    ingenic-battery {
+            compatible = "ingenic,jz4740-battery";
+            io-channels = <&adc INGENIC_ADC_BATTERY>;
+            io-channel-names = "battery";
+            monitored-battery = <&simple_battery>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
new file mode 100644
index 0000000000..fb3a812aa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP ISP1704 USB Charger Detection
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nxp,isp1704
+
+  nxp,enable-gpio:
+    maxItems: 1
+    description: GPIO connected to the chip's enable pin
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: USB PHY the ISP1704 is connected to
+
+required:
+  - compatible
+  - nxp,enable-gpio
+  - usb-phy
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger-detect {
+      compatible = "nxp,isp1704";
+      nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+      usb-phy = <&usb2_phy>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
new file mode 100644
index 0000000000..a99d989f14
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEGO MINDSTORMS EV3 Battery
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+  It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+  detected by a key switch in the battery compartment.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: lego,ev3-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for battery voltage
+      - description: ADC channel for battery current
+
+  io-channel-names:
+    items:
+      - const: voltage
+      - const: current
+
+  rechargeable-gpios:
+    maxItems: 1
+    description: Rechargeable battery indication gpio
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - rechargeable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    battery {
+      compatible = "lego,ev3-battery";
+      io-channels = <&adc 4>, <&adc 3>;
+      io-channel-names = "voltage", "current";
+      rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
new file mode 100644
index 0000000000..d26ed5eabe
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3651 Charger Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,lt3651-charger
+      - lltc,ltc3651-charger  # deprecated, use lltc,lt3651-charger
+
+  lltc,acpr-gpios:
+    maxItems: 1
+
+  lltc,fault-gpios:
+    maxItems: 1
+
+  lltc,chrg-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - lltc,acpr-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "lltc,lt3651-charger";
+      lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
+      lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
+      lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
new file mode 100644
index 0000000000..e68a97cb49
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+
+description: |
+  All chips measure battery capacity.
+  The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+  temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+  are software compatible, uses a slightly different conversion formula
+  for the charge counter and adds voltage, current and temperature monitoring.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2941
+      - lltc,ltc2942
+      - lltc,ltc2943
+      - lltc,ltc2944
+
+  reg:
+    maxItems: 1
+
+  lltc,resistor-sense:
+    $ref: /schemas/types.yaml#/definitions/int32
+    description: |
+      Sense resistor value in milli-ohms.
+      Can be negative value when the battery has been connected to the wrong end of the resistor.
+
+  lltc,prescaler-exponent:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The prescaler exponent as explained in the datasheet.
+      This determines the range and accuracy of the gauge.
+      The value is programmed into the chip only if it differs from the current setting.
+      The setting is lost when the battery is disconnected.
+
+required:
+  - compatible
+  - reg
+  - lltc,resistor-sense
+  - lltc,prescaler-exponent
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      battery@64 {
+        compatible = "lltc,ltc2943";
+        reg = <0x64>;
+        lltc,resistor-sense = <15>;
+        lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
new file mode 100644
index 0000000000..29d5365411
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Topic Embedded Products
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology (Analog Devices) LTC4162-L Charger
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  The LTC ® 4162-L is an advanced monolithic synchronous step-down switching
+  battery charger and PowerPath (TM) manager that seamlessly manages power
+  distribution between input sources such as wall adapters, backplanes, solar
+  panels, etc., and a rechargeable Lithium-Ion/Polymer battery.
+
+  Specifications about the charger can be found at:
+    https://www.analog.com/en/products/ltc4162-s.html
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4162-l
+
+  reg:
+    maxItems: 1
+    description: I2C address of the charger.
+
+  lltc,rsnsb-micro-ohms:
+    description: Battery sense resistor in microohm.
+    minimum: 1000
+
+  lltc,rsnsi-micro-ohms:
+    description: Input current sense resistor in microohm.
+    minimum: 1000
+
+  lltc,cell-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Number of battery cells. If not provided, will be obtained from the chip
+      once the external power is applied. Omit this when the number of cells
+      is somewhat dynamic. Without it, several measurements will return 0 until
+      the charger is connected to an external supply.
+
+required:
+  - compatible
+  - reg
+  - lltc,rsnsb-micro-ohms
+  - lltc,rsnsi-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      charger: battery-charger@68 {
+              compatible = "lltc,ltc4162-l";
+              reg = <0x68>;
+              lltc,rsnsb-micro-ohms = <10000>;
+              lltc,rsnsi-micro-ohms = <16000>;
+              lltc,cell-count = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
new file mode 100644
index 0000000000..62eeddb65a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The charger is represented as a sub-node of the PMIC node on the device tree.
+
+properties:
+  compatible:
+    const: maxim,max77650-charger
+
+  input-voltage-min-microvolt:
+    description:
+      Minimum CHGIN regulation voltage.
+    enum: [ 4000000, 4100000, 4200000, 4300000,
+            4400000, 4500000, 4600000, 4700000 ]
+
+  input-current-limit-microamp:
+    description:
+      CHGIN input current limit (in microamps).
+    enum: [ 95000, 190000, 285000, 380000, 475000 ]
+
+required:
+  - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/max8925_battery.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
new file mode 100644
index 0000000000..d7e3e0c0f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
@@ -0,0 +1,18 @@
+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+	charger {
+		batt-detect = <0>;
+		topoff-threshold = <1>;
+		fast-charge = <7>;
+		no-temp-support = <0>;
+		no-insert-detect = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
new file mode 100644
index 0000000000..5faa2418fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim DS2760
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The ds2760 is a w1 slave device and must hence have its sub-node in
+  DT under a w1 bus master node.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,ds2760
+
+  maxim,pmod-enabled:
+    description: |
+      Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
+      and leave sleep Mode when the DQ line goes high.
+    type: boolean
+
+  maxim,cache-time-ms:
+    description: |
+      Time im milliseconds to cache the data for.
+      When this time expires, the values are read again from the hardware.
+      Defaults to 1000.
+
+  rated-capacity-microamp-hours:
+    description: |
+      The rated capacity of the battery, in mAh.
+      If not specified, the value stored in the non-volatile chip memory is used.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 0000000000..4d3a1d0903
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-charger
+      - maxim,max77836-charger
+
+  maxim,constant-uvolt:
+    description:
+      Battery Constant Voltage in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4350000
+
+  maxim,eoc-uamp:
+    description: |
+      Current in uA for End-Of-Charge mode.
+      MAX14577: 50000-20000
+      MAX77836: 5000-100000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,fast-charge-uamp:
+    description: |
+      Current in uA for Fast Charge
+      MAX14577: 90000-950000
+      MAX77836: 45000-475000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,ovp-uvolt:
+    description:
+      OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+      asserts and charging stops.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+  - compatible
+  - maxim,constant-uvolt
+  - maxim,eoc-uamp
+  - maxim,fast-charge-uamp
+  - maxim,ovp-uvolt
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-charger
+    then:
+      properties:
+        maxim,eoc-uamp:
+          minimum: 50000
+          maximum: 200000
+        maxim,fast-charge-uamp:
+          minimum: 90000
+          maximum: 950000
+    else:
+      # max77836
+      properties:
+        maxim,eoc-uamp:
+          minimum: 5000
+          maximum: 100000
+        maxim,fast-charge-uamp:
+          minimum: 45000
+          maximum: 475000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
new file mode 100644
index 0000000000..b444b79984
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14656
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max14656
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger-detector@35 {
+        compatible = "maxim,max14656";
+        reg = <0x35>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
new file mode 100644
index 0000000000..2627cd3eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17040 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17040
+      - maxim,max17041
+      - maxim,max17043
+      - maxim,max17044
+      - maxim,max17048
+      - maxim,max17049
+      - maxim,max17058
+      - maxim,max17059
+      - maxim,max77836-battery
+
+  reg:
+    maxItems: 1
+
+  maxim,alert-low-soc-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description: |
+      The alert threshold that sets the state of charge level (%) where an interrupt is generated.
+      If skipped the power up default value of 4 (%) will be used.
+
+  maxim,double-soc:
+    type: boolean
+    description: |
+      Certain devices return double the capacity.
+      Specify this to divide the reported value in 2 and thus normalize it.
+      SoC == State of Charge == Capacity.
+
+  maxim,rcomp:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      A value to compensate readings for various battery chemistries and operating temperatures.
+      max17040,41 have 2 byte rcomp, default to 0x97 0x00.
+      All other devices have one byte rcomp, default to 0x97.
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: |
+      Use this property to use alert low SoC level interrupt as wake up source.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17048";
+        reg = <0x36>;
+        maxim,rcomp = /bits/ 8 <0x56>;
+        maxim,alert-low-soc-level = <10>;
+        maxim,double-soc;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max77836-battery";
+        reg = <0x36>;
+        maxim,alert-low-soc-level = <10>;
+        interrupt-parent = <&gpio7>;
+        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
new file mode 100644
index 0000000000..085e2504d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max17042
+      - maxim,max17047
+      - maxim,max17050
+      - maxim,max17055
+      - maxim,max77849-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      The ALRT pin, an open-drain interrupt.
+
+  maxim,rsns-microohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+      Defining this property enables current-sense functionality.
+
+  maxim,cold-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as cold (in tenths of degree Celsius).
+      Default is not to report cold events.
+
+  maxim,over-heat-temp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+      Default is not to report over heating events.
+
+  maxim,dead-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as dead (in mV).
+      Default is not to report dead battery events.
+
+  maxim,over-volt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage threshold to report battery as over voltage (in mV).
+      Default is not to report over-voltage events.
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@36 {
+        compatible = "maxim,max17042";
+        reg = <0x36>;
+        maxim,rsns-microohm = <10000>;
+        maxim,over-heat-temp = <600>;
+        maxim,over-volt = <4300>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 0000000000..f5fd53debb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-charger
+
+  maxim,constant-microvolt:
+    description: |
+      Battery constant voltage in uV. The charger will operate in fast
+      charge constant current mode till battery voltage reaches this level.
+      Then the charger will switch to fast charge constant voltage mode.
+      Also vsys (system voltage) will be set to this value when DC power is
+      supplied but charger is not enabled.
+      Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    minimum: 3650000
+    maximum: 4400000
+    default: 4200000
+
+  maxim,min-system-microvolt:
+    description: |
+      Minimal system voltage in uV.
+    enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+           3600000, 3700000]
+    default: 3600000
+
+  maxim,thermal-regulation-celsius:
+    description: |
+      Temperature in Celsius for entering high temperature charging mode.
+      If die temperature exceeds this value the charging current will be
+      reduced by 105 mA/Celsius.
+    enum: [70, 85, 100, 115]
+    default: 100
+
+  maxim,battery-overcurrent-microamp:
+    description: |
+      Overcurrent protection threshold in uA (current from battery to
+      system).
+      Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    minimum: 2000000
+    maximum: 3500000
+    default: 3500000
+
+  maxim,charge-input-threshold-microvolt:
+    description: |
+      Threshold voltage in uV for triggering input voltage regulation loop.
+      If input voltage decreases below this value, the input current will
+      be reduced to reach the threshold voltage.
+    enum: [4300000, 4700000, 4800000, 4900000]
+    default: 4300000
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
new file mode 100644
index 0000000000..f23dcc5079
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77976 Battery charger
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
+  configured via I2C.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max77976
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@6b {
+        compatible = "maxim,max77976";
+        reg = <0x6b>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
new file mode 100644
index 0000000000..a8d625f285
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Semiconductor MAX8903 Battery Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8903
+
+  dok-gpios:
+    maxItems: 1
+    description: Valid DC power has been detected (active low, input)
+
+  uok-gpios:
+    maxItems: 1
+    description: Valid USB power has been detected (active low, input)
+
+  cen-gpios:
+    maxItems: 1
+    description: Charge enable pin (active low, output)
+
+  chg-gpios:
+    maxItems: 1
+    description: Charger status pin (active low, input)
+
+  flt-gpios:
+    maxItems: 1
+    description: Fault pin (active low, output)
+
+  dcm-gpios:
+    maxItems: 1
+    description: Current limit mode setting (DC=1 or USB=0, output)
+
+  usus-gpios:
+    maxItems: 1
+    description: USB suspend pin (active high, output)
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - dok-gpios
+  - required:
+      - uok-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    charger {
+      compatible = "maxim,max8903";
+      dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+      flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+      chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+      cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 0000000000..fd491c598a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Battery Charger
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-charger
+
+  interrupts:
+    description: |
+      Specify what irqs are needed to be handled by MT6370 Charger driver.
+      We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
+      is plugged in, and then the driver will enable BC1.2 detection.
+      After the hardware of MT6370 completes the BC1.2 detection,
+      IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
+      the result of BC1.2 detection.
+      When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
+      hardware enters the "Minimum Input Voltage Regulation loop" and
+      a workaround needs to be applied at this time.
+      In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
+      "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
+    items:
+      - description: irq of "USB is plugged in"
+      - description: irq of "BC1.2 is done"
+      - description: irq of "Minimum Input Voltage Regulation loop is active"
+
+  interrupt-names:
+    items:
+      - const: uvp_d_evt
+      - const: attach_i
+      - const: mivr
+
+  io-channels:
+    description: |
+      Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+    minItems: 1
+    items:
+      - description: |
+          VBUS voltage with lower accuracy (+-75mV) but higher measure
+          range (1~22V)
+      - description: |
+          VBUS voltage with higher accuracy (+-30mV) but lower measure
+          range (1~9.76V)
+      - description: the main system input voltage
+      - description: battery voltage
+      - description: battery temperature-sense input voltage
+      - description: IBUS current (required)
+      - description: battery current
+      - description: |
+          regulated output voltage to supply for the PWM low-side gate driver
+          and the bootstrap capacitor
+      - description: IC junction temperature
+
+  io-channel-names:
+    minItems: 1
+    items:
+      - const: vbusdiv5
+      - const: vbusdiv2
+      - const: vsys
+      - const: vbat
+      - const: ts_bat
+      - const: ibus
+      - const: ibat
+      - const: chg_vddp
+      - const: temp_jc
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml#
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
new file mode 100644
index 0000000000..b9bd1591ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip UCS1002 USB Port Power Controller
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    const: microchip,ucs1002
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: a_det
+          - const: alert
+      - const: a_det
+      - const: alert
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@32 {
+            compatible = "microchip,ucs1002";
+            reg = <0x32>;
+            interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+                                  <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "a_det", "alert";
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
new file mode 100644
index 0000000000..4c74cc7872
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6360-chg
+
+  richtek,vinovp-microvolt:
+    description: Maximum CHGIN regulation voltage in uV.
+    enum: [ 5500000, 6500000, 11000000, 14500000 ]
+
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    mt6360_charger: charger {
+      compatible = "mediatek,mt6360-chg";
+      richtek,vinovp-microvolt = <14500000>;
+
+      otg_vbus_regulator: usb-otg-vbus-regulator {
+        regulator-name = "usb-otg-vbus";
+        regulator-min-microvolt = <4425000>;
+        regulator-max-microvolt = <5825000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
new file mode 100644
index 0000000000..5178e62072
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nokia N900 battery
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: nokia,n900-battery
+
+  io-channels:
+    items:
+      - description: ADC channel for temperature reading
+      - description: ADC channel for battery size identification
+      - description: ADC channel to measure the battery voltage
+
+  io-channel-names:
+    items:
+      - const: temp
+      - const: bsi
+      - const: vbat
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    battery {
+      compatible = "nokia,n900-battery";
+      io-channels = <&twl4030_madc 0>,
+                    <&twl4030_madc 4>,
+                    <&twl4030_madc 12>;
+      io-channel-names = "temp",
+                         "bsi",
+                         "vbat";
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
new file mode 100644
index 0000000000..dd89e2532a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC Battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: olpc,xo1.5-battery
+          - const: olpc,xo1-battery
+      - items:
+          - const: olpc,xo1-battery
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
new file mode 100644
index 0000000000..4e54c93797
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Supply Core Support
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  power-supplies:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      This property is added to a supply in order to list the devices which
+      supply it power, referenced by their phandles.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The battery (with "simple-battery" compatible) being monitored by this
+      power supply.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 0000000000..cbac55d3cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8226-charger
+      - qcom,pm8941-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: charge done
+      - description: charge fast mode
+      - description: charge trickle mode
+      - description: battery temperature ok
+      - description: battery present
+      - description: charger disconnected
+      - description: USB-in valid
+      - description: DC-in valid
+
+  interrupt-names:
+    items:
+      - const: chg-done
+      - const: chg-fast
+      - const: chg-trkl
+      - const: bat-temp-ok
+      - const: bat-present
+      - const: chg-gone
+      - const: usb-valid
+      - const: dc-valid
+
+  qcom,fast-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+  qcom,fast-charge-low-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2100000
+    maximum: 3600000
+    description: |
+      Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+      Below this value linear or switch-mode auto-trickle-charging will operate.
+
+  qcom,fast-charge-high-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+      The fast charger will attempt to charge the battery to this voltage.
+      May be clamped to safety limits.
+
+  qcom,fast-charge-safe-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+      be clamped by this value. Defaults to 4.2V.
+
+  qcom,fast-charge-safe-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 3000000
+    description: |
+      Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+      setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+      will be clamped by this value. Defaults to 1A.
+
+  qcom,auto-recharge-threshold-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3240000
+    maximum: 5000000
+    description: |
+      Battery voltage limit in uV below which auto-recharge functionality will restart charging
+      after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+      Defaults to 4.1V.
+
+  qcom,minimum-input-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4200000
+    maximum: 9600000
+    description: |
+      Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+  qcom,dc-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default DC charge current limit in uA. Defaults to 100mA.
+
+  qcom,disable-dc:
+    type: boolean
+    description: Disable DC charger
+
+  qcom,jeita-extended-temp-range:
+    type: boolean
+    description: |
+      Enable JEITA extended temperature range;  This does *not* adjust the maximum charge
+      voltage or current in the extended temperature range. It only allows charging when
+      the battery is in the extended temperature range. Voltage/current regulation must
+      be done externally to fully comply with the JEITA safety guidelines if this flag
+      is set.
+
+  usb-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default USB charge current limit in uA.
+
+  usb-otg-in-supply:
+    description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+  otg-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: |
+      This node defines a regulator used to control the direction of VBUS voltage.
+      Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+      or allow input voltage from external VBUS for charging. In the hardware, the supply for
+      this regulator comes from usb_otg_in-supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@1000 {
+        compatible = "qcom,pm8941-charger";
+        reg = <0x1000>;
+        interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+                     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+        interrupt-names = "chg-done",
+                          "chg-fast",
+                          "chg-trkl",
+                          "bat-temp-ok",
+                          "bat-present",
+                          "chg-gone",
+                          "usb-valid",
+                          "dc-valid";
+        qcom,fast-charge-current-limit = <1000000>;
+        qcom,dc-current-limit = <1000000>;
+        usb-otg-in-supply = <&pm8941_5vs1>;
+
+        otg-vbus {};
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
new file mode 100644
index 0000000000..1d2405bea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coincell Charger
+
+description: |
+  The hardware block controls charging for a coincell or capacitor that is
+  used to provide power backup for certain features of the power management
+  IC (PMIC)
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pm8998-coincell
+          - const: qcom,pm8941-coincell
+
+      - const: qcom,pm8941-coincell
+
+  reg:
+    maxItems: 1
+
+  qcom,rset-ohms:
+    description: |
+      Resistance (in ohms) for current-limiting resistor. If unspecified,
+      inherit the previous configuration (e.g. from bootloader or hardware
+      default value).
+    enum: [ 800, 1200, 1700, 2100 ]
+
+  qcom,vset-millivolts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Voltage (in millivolts) to apply for charging. If unspecified, inherit
+      the previous configuration (e.g. from bootloader or hardware default
+      value).
+    enum: [ 2500, 3000, 3100, 3200 ]
+
+  qcom,charger-disable:
+    type: boolean
+    description: defining this property disables charging
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@2800 {
+        compatible = "qcom,pm8941-coincell";
+        reg = <0x2800>;
+        qcom,rset-ohms = <2100>;
+        qcom,vset-millivolts = <3000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
new file mode 100644
index 0000000000..277c47e048
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2"
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-charger
+      - qcom,pm660-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: usb-plugin
+      - const: bat-ov
+      - const: wdog-bark
+      - const: usbin-icl-change
+
+  io-channels:
+    items:
+      - description: USB in current in uA
+      - description: USB in voltage in uV
+
+  io-channel-names:
+    items:
+      - const: usbin_i
+      - const: usbin_v
+
+  monitored-battery:
+    description: phandle to the simple-battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <4>;
+
+      charger@1000 {
+        compatible = "qcom,pmi8998-charger";
+        reg = <0x1000>;
+
+        interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+                     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>,
+                     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+        io-channels = <&pmi8998_rradc 3>,
+                      <&pmi8998_rradc 4>;
+        io-channel-names = "usbin_i",
+                           "usbin_v";
+
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
new file mode 100644
index 0000000000..b5d8888d03
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Fuel Gauge
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt5033-battery
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@35 {
+        compatible = "richtek,rt5033-battery";
+        reg = <0x35>;
+        interrupt-parent = <&msmgpio>;
+        interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 0000000000..5b3edd79a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  The battery charger of the multifunction device RT5033 has to be instantiated
+  under sub-node named "charger" using the following format.
+
+properties:
+  compatible:
+    const: richtek,rt5033-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the monitored battery according to battery.yaml. The battery
+      node needs to contain five parameters.
+
+      precharge-current-microamp:
+      Current of pre-charge mode. The pre-charge current levels are 350 mA
+      to 650 mA programmed by I2C per 100 mA.
+
+      constant-charge-current-max-microamp:
+      Current of fast-charge mode. The fast-charge current levels are 700 mA
+      to 2000 mA programmed by I2C per 100 mA.
+
+      charge-term-current-microamp:
+      This property is end of charge current. Its level ranges from 150 mA
+      to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+      600 mA in 100 mA steps.
+
+      precharge-upper-limit-microvolt:
+      Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+      threshold voltage, the charger is in pre-charge mode with pre-charge
+      current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+      constant-charge-voltage-max-microvolt:
+      Battery regulation voltage of constant voltage mode. This voltage levels
+      from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+  richtek,usb-connector:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to a USB connector according to usb-connector.yaml. The connector
+      should be a child of the extcon device.
+
+required:
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    charger {
+        compatible = "richtek,rt5033-charger";
+        monitored-battery = <&battery>;
+        richtek,usb-connector = <&usb_con>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
new file mode 100644
index 0000000000..07e38be39f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek rt9455 battery charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: richtek,rt9455
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  richtek,output-charge-current:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: output current from the charger to the battery, in uA.
+
+  richtek,end-of-charge-percentage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      percent of the output charge current. When the current in constant-voltage phase drops
+      below output_charge_current x end-of-charge-percentage, charge is terminated.
+
+  richtek,battery-regulation-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum battery voltage in uV.
+
+  richtek,boost-output-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
+
+  richtek,min-input-voltage-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input voltage level in uV, used to decrease voltage level when the over current of the
+      input power source occurs. This prevents input voltage drop due to insufficient
+      current provided by the power source. Defaults to 4500000 uV (4.5V).
+
+  richtek,avg-input-current-regulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      input current value in uA drained by the charger from the power source.
+      Defaults to 500000 uA (500mA).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - richtek,output-charge-current
+  - richtek,end-of-charge-percentage
+  - richtek,battery-regulation-voltage
+  - richtek,boost-output-voltage
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@22 {
+        compatible = "richtek,rt9455";
+        reg = <0x22>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+        richtek,output-charge-current	    = <500000>;
+        richtek,end-of-charge-percentage    = <10>;
+        richtek,battery-regulation-voltage  = <4200000>;
+        richtek,boost-output-voltage	    = <5050000>;
+
+        richtek,min-input-voltage-regulation = <4500000>;
+        richtek,avg-input-current-regulation = <500000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
new file mode 100644
index 0000000000..3723717dc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9467 Switching Battery Charger with Power Path Management
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+  portable applications. It integrates a synchronous PWM controller, power
+  MOSFETs, input current sensing and regulation, high-accuracy voltage
+  regulation, and charge termination. The charge current is regulated through
+  integrated sensing resistors.
+
+  The RT9467 also features USB On-The-Go (OTG) support. It also integrates
+  D+/D- pin for USB host/charging port detection.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
+
+properties:
+  compatible:
+    const: richtek,rt9467
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO is used to turn on and off charging.
+    maxItems: 1
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml#
+
+    properties:
+      enable-gpios: true
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@5b {
+        compatible = "richtek,rt9467";
+        reg = <0x5b>;
+        wakeup-source;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+
+        rt9467_otg_vbus: usb-otg-vbus-regulator {
+          regulator-name = "rt9467-usb-otg-vbus";
+          regulator-min-microvolt = <4425000>;
+          regulator-max-microvolt = <5825000>;
+          regulator-min-microamp = <500000>;
+          regulator-max-microamp = <3000000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
new file mode 100644
index 0000000000..fbb54cfeca
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9471.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9471 3A Single Cell Switching Battery charger
+
+maintainers:
+  - Alina Yu <alina_yu@richtek.com>
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT9471 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+  portable applications. It supports USB BC1.2 port detection, current and
+  voltage regulations in both charging and boost mode.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT9471=RT9471D/DS9471D-02.pdf
+
+properties:
+  compatible:
+    const: richtek,rt9471
+
+  reg:
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus-regulator:
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@53 {
+        compatible = "richtek,rt9471";
+        reg = <0x53>;
+        charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+        wakeup-source;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>;
+
+        usb-otg-vbus-regulator {
+          regulator-name = "usb-otg-vbus";
+          regulator-min-microvolt = <4850000>;
+          regulator-max-microvolt = <5300000>;
+          regulator-min-microamp = <500000>;
+          regulator-max-microamp = <1200000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 0000000000..b2c229ed24
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+  - Markus Laine <markus.laine@fi.rohmeurope.com>
+  - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+  The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+  secondary battery intended to be used in space-constraint equipment such
+  as Low profile Notebook PC, Tablets and other applications. BD99954
+  provides a Dual-source Battery Charger, two port BC1.2 detection and a
+  Battery Monitor.
+
+$ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: rohm,bd99954
+#
+#    The battery charging profile of BD99954.
+#
+#    Curve (1) represents charging current.
+#    Curve (2) represents battery voltage.
+#
+#    The BD99954 data sheet divides charging to three phases.
+#    a) Trickle-charge with constant current (8).
+#    b) pre-charge with constant current (6)
+#    c) fast-charge with:
+#       First a constant current (5) phase (CC)
+#       Then constant voltage (CV) phase (after the battery voltage has reached
+#       target level - until charging current has dropped to termination
+#       level (7)
+#
+#     V ^                                                        ^ I
+#       .                                                        .
+#       .                                                        .
+# (4)- -.- - - - - - - - - - - - - -  +++++++++++++++++++++++++++.
+#       .                            /                           .
+#       .                     ++++++/++ - - - - - - - - - - - - -.- - (5)
+#       .                     +    /  +                          .
+#       .                     +   -   --                         .
+#       .                     +  -     +                         .
+#       .                     +.-      -:                        .
+#       .                    .+         +`                       .
+#       .                  .- +       | `/                       .
+#       .               .."   +          .:                      .
+#       .             -"      +           --                     .
+#       .    (2)  ..."        +       |    :-                    .
+#       .    ...""            +             -:                   .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+#       .             +                       `:.                .
+#       .             +               |         -:               .
+#       .             +                           -:             .
+#       .             +                             ..           .
+#       .   (1)       +               |               "+++- - - -.- - (7)
+#       -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+#       .                                                +       -
+#       -------------------------------------------------+++++++++-->
+#       |             |       |   CC   |      CV         |
+#       | --trickle-- | -pre- | ---------fast----------- |
+#
+#   The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+#     Current used at trickle-charge phase (8 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - precharge-current-microamp:
+#     Current used at pre-charge phase (6 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-current-max-microamp
+#     Current used at fast charge constant current phase (5 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+#     The constant voltage used in fast charging phase (4 in above chart)
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - precharge-upper-limit-microvolt
+#     charging mode is changed from trickle charging to pre-charging
+#     when battery voltage exceeds this limit voltage (3 in above chart)
+#     minimum: 2048000
+#     maximum: 19200000
+#     multipleOf: 64000
+# - re-charge-voltage-microvolt
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+#     re-charging is automatically started when battry has been discharging
+#     to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+#     battery is expected to be faulty if battery voltage exceeds this limit.
+#     Charger will then enter to a "battery faulty" -state
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - charge-term-current-microamp
+#     minimum: 0
+#     maximum: 1024000
+#     multipleOf: 64000
+#     a charge cycle terminates when the battery voltage is above recharge
+#     threshold, and the current is below this setting (7 in above chart)
+#   See also Documentation/devicetree/bindings/power/supply/battery.yaml
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description:
+      phandle of battery characteristics devicetree node
+
+  rohm,vsys-regulation-microvolt:
+    description: system specific lower limit for system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,vbus-input-current-limit-microamp:
+    description: system specific VBUS input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,vcc-input-current-limit-microamp:
+    description: system specific VCC/VACP input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        charger@9 {
+            compatible = "rohm,bd99954";
+            monitored-battery = <&battery>;
+            reg = <0x9>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+            rohm,vsys-regulation-microvolt = <8960000>;
+            rohm,vbus-input-current-limit-microamp = <1472000>;
+            rohm,vcc-input-current-limit-microamp = <1472000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
new file mode 100644
index 0000000000..40292d581b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/samsung,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SDI Batteries
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Samsung SDI (Samsung Digital Interface) batteries are all different versions
+  of lithium ion chemistry devices used for mobile phones, laptops and other
+  portable electronics. The batteries are adapted to a specific product and
+  the physical restrictions make it impossible to use another battery with the
+  product, so product device trees can specify these batteries. Operating
+  systems should determine hardware characteristics of the batteries from the
+  compatible string.
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,eb-l1m7flu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I8190
+      - const: samsung,eb425161la
+        description: 3.8V 1500 mAh battery used in Samsung SGH-T599 and SGH-I407
+      - const: samsung,eb425161lu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I8160
+      - const: samsung,eb485159lu
+        description: 3.8V 1700 mAh battery used in Samsung GT-S7710
+      - const: samsung,eb535151vu
+        description: 3.8V 1500 mAh battery used in Samsung GT-I9070
+      - const: samsung,eb585157lu
+        description: 3.8V 2000 mAh battery used in Samsung GT-I8530
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery: battery {
+        compatible = "samsung,eb425161la";
+      };
+
+      charger@11 {
+        reg = <0x11>;
+        monitored-battery = <&battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
new file mode 100644
index 0000000000..90b9d3d882
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Battery compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,bq20z45
+              - ti,bq20z65
+              - ti,bq20z75
+          - enum:
+              - sbs,sbs-battery
+      - items:
+          - const: sbs,sbs-battery
+
+  reg:
+    maxItems: 1
+
+  sbs,i2c-retry-count:
+    description:
+      The number of times to retry I2C transactions on I2C IO failure.
+    default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,poll-retry-count:
+    description:
+      The number of times to try looking for new status after an external
+      change notification.
+    default: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,battery-detect-gpios:
+    description:
+      GPIO which signals battery detection. If this is not supplied, the bus
+      needs to be polled to detect the battery.
+    maxItems: 1
+
+  sbs,disable-charger-broadcasts:
+    description:
+      SBS batteries by default send broadcast messages to SBS compliant chargers to
+      configure max. charge current/voltage. If your hardware does not have an SBS
+      compliant charger it should be disabled via this property to avoid blocking
+      the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+      master implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        battery@b {
+            compatible = "ti,bq20z75", "sbs,sbs-battery";
+            reg = <0xb>;
+            sbs,i2c-retry-count = <2>;
+            sbs,poll-retry-count = <10>;
+            sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+            sbs,disable-charger-broadcasts;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
new file mode 100644
index 0000000000..cb73ffa477
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Charger compatible with the smart battery system specifications
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc4100
+          - enum:
+              - sbs,sbs-charger
+      - items:
+          - const: sbs,sbs-charger
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@9 {
+            compatible = "lltc,ltc4100", "sbs,sbs-charger";
+            reg = <0x9>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 0000000000..f255f3858d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manager
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lltc,ltc1760
+          - enum:
+              - sbs,sbs-manager
+      - items:
+          - const: sbs,sbs-manager
+
+  reg:
+    const: 0xa
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^i2c@[1-4]$":
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      batman: battery-manager@a {
+        compatible = "lltc,ltc1760", "sbs,sbs-manager";
+        reg = <0x0a>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        i2c@1 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <1>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 1 1>;
+          };
+        };
+
+        i2c@2 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <2>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 2 1>;
+          };
+        };
+
+        i2c@3 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <3>;
+
+          battery@b {
+            compatible = "ti,bq20z65", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 3 1>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
new file mode 100644
index 0000000000..a846a4d14c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMICs battery charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: sprd,sc2731-charger
+
+  reg:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+    description: phandle to the USB phy
+
+  monitored-battery:
+    description: |
+      The charger uses the following battery properties
+      - charge-term-current-microamp: current for charge termination phase.
+      - constant-charge-voltage-max-microvolt: maximum constant input voltage.
+
+additionalProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      charge-term-current-microamp = <120000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-charger";
+        reg = <0x0>;
+        phys = <&ssphy>;
+        monitored-battery = <&bat>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 0000000000..de43e45a43
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc2720-fgu
+      - sprd,sc2721-fgu
+      - sprd,sc2723-fgu
+      - sprd,sc2730-fgu
+      - sprd,sc2731-fgu
+
+  reg:
+    maxItems: 1
+
+  battery-detect-gpios:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: Battery Temperature ADC
+      - description: Battery Charge Voltage ADC
+
+  io-channel-names:
+    items:
+      - const: bat-temp
+      - const: charge-vol
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration cells provided by eFuse device
+
+  nvmem-cell-names:
+    const: fgu_calib
+
+  sprd,calib-resistance-micro-ohms:
+    description: real resistance of coulomb counter chip in micro Ohms
+
+  monitored-battery: true
+
+required:
+  - compatible
+  - reg
+  - battery-detect-gpios
+  - io-channels
+  - io-channel-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - sprd,calib-resistance-micro-ohms
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    bat: battery {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <1900000>;
+      constant-charge-voltage-max-microvolt = <4350000>;
+      ocv-capacity-celsius = <20>;
+      ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+                             <4022000 85>, <3983000 80>, <3949000 75>,
+                             <3917000 70>, <3889000 65>, <3864000 60>,
+                             <3835000 55>, <3805000 50>, <3787000 45>,
+                             <3777000 40>, <3773000 35>, <3770000 30>,
+                             <3765000 25>, <3752000 20>, <3724000 15>,
+                             <3680000 10>, <3605000 5>, <3400000 0>;
+                             // ...
+    };
+
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      battery@a00 {
+        compatible = "sprd,sc2731-fgu";
+        reg = <0xa00>;
+        battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+        io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+        io-channel-names = "bat-temp", "charge-vol";
+        nvmem-cells = <&fgu_calib>;
+        nvmem-cell-names = "fgu_calib";
+        monitored-battery = <&bat>;
+        sprd,calib-resistance-micro-ohms = <21500>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
new file mode 100644
index 0000000000..ee125cb0e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
@@ -0,0 +1,34 @@
+AB85000 PMIC contains a node, which contains shared
+information about the battery connected to the PMIC.
+The node has no compatible property.
+
+Properties of this node are:
+
+thermistor-on-batctrl:
+	A boolean value indicating thermistor interface	to battery
+
+	Note:
+	'btemp' and 'batctrl' are the pins interfaced for battery temperature
+	measurement, 'btemp' signal is used when NTC(negative temperature
+	coefficient) resister is interfaced external to battery whereas
+	'batctrl' pin is used when NTC resister is internal to battery.
+
+	Example:
+	ab8500_battery: ab8500_battery {
+		thermistor-on-batctrl;
+	};
+	indicates: NTC resister is internal to battery, 'batctrl' is used
+		for thermal measurement.
+
+	The absence of property 'thermal-on-batctrl' indicates
+	NTC resister is external to battery and  'btemp' signal is used
+	for thermal measurement.
+
+battery-type:
+	This shall be the battery manufacturing technology type,
+	allowed types are:
+		"UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+	Example:
+	ab8500_battery: ab8500_battery {
+		stericsson,battery-type = "LIPO";
+	}
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
new file mode 100644
index 0000000000..525abdfb3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Battery Temperature Monitor
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-btemp
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: BAT_CTRL_INDB
+      - const: BTEMP_LOW
+      - const: BTEMP_HIGH
+      - const: BTEMP_LOW_MEDIUM
+      - const: BTEMP_MEDIUM_HIGH
+
+  io-channels:
+    maxItems: 2
+
+  io-channel-names:
+    items:
+      - const: btemp_ball
+      - const: bat_ctrl
+
+required:
+  - compatible
+  - monitored-battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      battery-temperature {
+        compatible = "stericsson,ab8500-btemp";
+        monitored-battery = <&battery>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+                     <80 IRQ_TYPE_LEVEL_HIGH>,
+                     <83 IRQ_TYPE_LEVEL_HIGH>,
+                     <81 IRQ_TYPE_LEVEL_HIGH>,
+                     <82 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "BAT_CTRL_INDB",
+                          "BTEMP_LOW",
+                          "BTEMP_HIGH",
+                          "BTEMP_LOW_MEDIUM",
+                          "BTEMP_MEDIUM_HIGH";
+        io-channels = <&gpadc 0x02>, <&gpadc 0x01>;
+        io-channel-names = "btemp_ball", "bat_ctrl";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
new file mode 100644
index 0000000000..10bbdcfc87
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charging Algorithm
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-chargalg
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+required:
+  - compatible
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charging-algorithm {
+        compatible = "stericsson,ab8500-chargalg";
+        monitored-battery = <&ab8500_battery>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
new file mode 100644
index 0000000000..e33329b3af
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  vddadc-supply:
+    description: Supply for USB and Main charger
+
+  autopower_cfg:
+    type: boolean
+    description: automatic poweron after powerloss
+
+  interrupts:
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: MAIN_CH_UNPLUG_DET
+      - const: MAIN_CHARGE_PLUG_DET
+      - const: MAIN_EXT_CH_NOT_OK
+      - const: MAIN_CH_TH_PROT_R
+      - const: MAIN_CH_TH_PROT_F
+      - const: VBUS_DET_F
+      - const: VBUS_DET_R
+      - const: USB_LINK_STATUS
+      - const: USB_CH_TH_PROT_R
+      - const: USB_CH_TH_PROT_F
+      - const: USB_CHARGER_NOT_OKR
+      - const: VBUS_OVV
+      - const: CH_WD_EXP
+      - const: VBUS_CH_DROP_END
+
+  io-channels:
+    minItems: 2
+    maxItems: 4
+
+  io-channel-names:
+    oneOf:
+      - items:
+          - const: main_charger_v
+          - const: main_charger_c
+          - const: vbus_v
+          - const: usb_charger_c
+      - items:
+          - const: vbus_v
+          - const: usb_charger_c
+
+
+required:
+  - compatible
+  - monitored-battery
+  - vddadc-supply
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      charger {
+        compatible = "stericsson,ab8500-charger";
+        monitored-battery = <&battery>;
+        vddadc-supply = <&ab8500_ldo_tvout_reg>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+                     <11 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 IRQ_TYPE_LEVEL_HIGH>,
+                     <107 IRQ_TYPE_LEVEL_HIGH>,
+                     <106 IRQ_TYPE_LEVEL_HIGH>,
+                     <14 IRQ_TYPE_LEVEL_HIGH>,
+                     <15 IRQ_TYPE_LEVEL_HIGH>,
+                     <79 IRQ_TYPE_LEVEL_HIGH>,
+                     <105 IRQ_TYPE_LEVEL_HIGH>,
+                     <104 IRQ_TYPE_LEVEL_HIGH>,
+                     <89 IRQ_TYPE_LEVEL_HIGH>,
+                     <22 IRQ_TYPE_LEVEL_HIGH>,
+                     <21 IRQ_TYPE_LEVEL_HIGH>,
+                     <16 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "MAIN_CH_UNPLUG_DET",
+                          "MAIN_CHARGE_PLUG_DET",
+                          "MAIN_EXT_CH_NOT_OK",
+                          "MAIN_CH_TH_PROT_R",
+                          "MAIN_CH_TH_PROT_F",
+                          "VBUS_DET_F",
+                          "VBUS_DET_R",
+                          "USB_LINK_STATUS",
+                          "USB_CH_TH_PROT_R",
+                          "USB_CH_TH_PROT_F",
+                          "USB_CHARGER_NOT_OKR",
+                          "VBUS_OVV",
+                          "CH_WD_EXP",
+                          "VBUS_CH_DROP_END";
+        io-channels = <&gpadc 0x03>,
+                      <&gpadc 0x0a>,
+                      <&gpadc 0x09>,
+                      <&gpadc 0x0b>;
+        io-channel-names = "main_charger_v",
+                           "main_charger_c",
+                           "vbus_v",
+                           "usb_charger_c";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
new file mode 100644
index 0000000000..6a724ca90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Fuel Gauge
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: stericsson,ab8500-fg
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to battery node
+
+  battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  line-impedance-micro-ohms:
+    description: The line impedance between the battery and the
+      AB8500 inputs, to compensate for this when determining internal
+      resistance.
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: NCONV_ACCU
+      - const: BATT_OVV
+      - const: LOW_BAT_F
+      - const: CC_INT_CALIB
+      - const: CCEOC
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    items:
+      - const: main_bat_v
+
+required:
+  - compatible
+  - monitored-battery
+  - interrupts
+  - interrupt-names
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+      fuel-gauge {
+        compatible = "stericsson,ab8500-fg";
+        monitored-battery = <&battery>;
+        interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                     <8 IRQ_TYPE_LEVEL_HIGH>,
+                     <28 IRQ_TYPE_LEVEL_HIGH>,
+                     <27 IRQ_TYPE_LEVEL_HIGH>,
+                     <26 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "NCONV_ACCU",
+                          "BATT_OVV",
+                          "LOW_BAT_F",
+                          "CC_INT_CALIB",
+                          "CCEOC";
+        io-channels = <&gpadc 0x08>;
+        io-channel-names = "main_bat_v";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
new file mode 100644
index 0000000000..2d552becbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+  summit,inok-polarity:
+    description: |
+      Polarity of INOK signal indicating presence of external power supply.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW
+      - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
+
+  usb-vbus:
+    $ref: /schemas/regulator/regulator.yaml#
+    type: object
+
+    properties:
+      summit,needs-inok-toggle:
+        type: boolean
+        description: INOK signal is fixed and polarity needs to be toggled
+                     in order to enable/disable output mode.
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 1000000,
+                  1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000, 500000, 700000, 900000, 1200000,
+                  1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+
+            usb-vbus {
+                regulator-name = "usb_vbus";
+                regulator-min-microvolt = <5000000>;
+                regulator-max-microvolt = <5000000>;
+                regulator-min-microamp = <750000>;
+                regulator-max-microamp = <750000>;
+                summit,needs-inok-toggle;
+            };
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
new file mode 100644
index 0000000000..069422a8c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP8727 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,lp8727
+
+  reg:
+    const: 0x27
+
+  interrupts:
+    maxItems: 1
+
+  debounce-ms:
+    description: interrupt debounce time in ms
+
+patternProperties:
+  '^(ac|usb)$':
+    type: object
+    additionalProperties: false
+    description: USB/AC charging parameters
+    properties:
+      charger-type:
+        enum:
+          - ac
+          - usb
+
+      eoc-level:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 6
+        description: |
+          End of Charge Percentage with the following mapping:
+          0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
+
+      charging-current:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        minimum: 0
+        maximum: 9
+        description: |
+          Charging current with the following mapping:
+          0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
+          6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lp8727: charger@27 {
+        compatible = "ti,lp8727";
+        reg = <0x27>;
+        interrupt-parent = <&gpio5>;
+        interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+        debounce-ms = <300>;
+
+        /* AC charger: 5% EOC and 500mA charging current */
+        ac {
+          charger-type = "ac";
+          eoc-level = /bits/ 8 <0>;
+          charging-current = /bits/ 8 <4>;
+        };
+
+        /* USB charger: 10% EOC and 400mA charging current */
+        usb {
+          charger-type = "usb";
+          eoc-level = /bits/ 8 <1>;
+          charging-current = /bits/ 8 <2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
new file mode 100644
index 0000000000..5867454263
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65090 Frontend PMU with Switchmode Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65090-charger
+
+  ti,enable-low-current-chrg:
+    type: boolean
+    description: |
+      Enables charging when a low current is detected while the default logic is to stop charging.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65090-charger";
+        ti,enable-low-current-chrg;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
new file mode 100644
index 0000000000..7ccf0cdffd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65217 Charger
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,tps65217-charger
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: USB
+      - const: AC
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,tps65217-charger";
+        interrupts = <0>, <1>;
+        interrupt-names = "USB", "AC";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
new file mode 100644
index 0000000000..d8d3154f9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TWL4030 BCI (Battery Charger Interface)
+
+description: |
+  The battery charger needs to interact with the USB phy in order to know when
+  charging is permissible, and when there is a connection or disconnection.
+
+  The choice of phy cannot be configured at a hardware level, so there is no
+  value in explicit configuration in device-tree. Rather if there is a sibling
+  of the BCI node which is compatible with "ti,twl4030-usb", then that is used
+  to determine when and how use USB power for charging.
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,twl4030-bci
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  ti,bb-uvolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microvolts for charging the backup battery
+
+  ti,bb-uamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: microamps for charging the backup battery
+
+  io-channels:
+    items:
+      - description: Accessory Charger Voltage Channel
+
+  io-channel-names:
+    items:
+      - const: vac
+
+  bci3v1-supply:
+    description: 3.1V USB regulator
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      charger {
+        compatible = "ti,twl4030-bci";
+        interrupts = <9>, <2>;
+        ti,bb-uvolt = <3200000>;
+        ti,bb-uamp = <150>;
+        io-channels = <&twl_madc 11>;
+        io-channel-names = "vac";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
new file mode 100644
index 0000000000..5c8369fd3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x AC power-supply
+
+description: |
+  The AXP20X can read the current current and voltage supplied by AC by
+  reading ADC channels from the AXP20X ADC. The AXP22X is only able to
+  tell if an AC power supply is present and usable. AXP813/AXP803 are
+  able to limit current and supply voltage
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp202-ac-power-supply
+      - const: x-powers,axp221-ac-power-supply
+      - items:
+          - const: x-powers,axp803-ac-power-supply
+          - const: x-powers,axp813-ac-power-supply
+      - const: x-powers,axp813-ac-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
new file mode 100644
index 0000000000..e0b95ecbbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x Battery power-supply
+
+description: |
+  The supported devices can read the battery voltage, charge and discharge
+  currents of the battery by reading ADC channels from the ADC.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: x-powers,axp202-battery-power-supply
+      - const: x-powers,axp209-battery-power-supply
+      - const: x-powers,axp221-battery-power-supply
+      - items:
+          - const: x-powers,axp803-battery-power-supply
+          - const: x-powers,axp813-battery-power-supply
+      - const: x-powers,axp813-battery-power-supply
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
new file mode 100644
index 0000000000..34b7959d67
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x USB power-supply
+
+description: |
+  The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+  variations such as the former being able to set the VBUS power supply max
+  current to 100mA, unlike the latter.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp192-usb-power-supply
+          - x-powers,axp202-usb-power-supply
+          - x-powers,axp221-usb-power-supply
+          - x-powers,axp223-usb-power-supply
+          - x-powers,axp813-usb-power-supply
+      - items:
+          - const: x-powers,axp803-usb-power-supply
+          - const: x-powers,axp813-usb-power-supply
+
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt
new file mode 100644
index 0000000000..21ef14d6af
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt
@@ -0,0 +1,47 @@
+Texas Instruments SmartReflex binding
+
+SmartReflex is used to set and adjust the SoC operating points.
+
+
+Required properties:
+
+compatible: Shall be one of the following:
+	    "ti,omap3-smartreflex-core"
+	    "ti,omap3-smartreflex-mpu-iva"
+	    "ti,omap4-smartreflex-core"
+	    "ti,omap4-smartreflex-mpu"
+	    "ti,omap4-smartreflex-iva"
+
+reg: Shall contain the device instance IO range
+
+interrupts: Shall contain the device instance interrupt
+
+
+Optional properties:
+
+ti,hwmods: Shall contain the TI interconnect module name if needed
+	   by the SoC
+
+
+Example:
+
+	smartreflex_iva: smartreflex@4a0db000 {
+		compatible = "ti,omap4-smartreflex-iva";
+		reg = <0x4a0db000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_iva";
+	};
+
+	smartreflex_core: smartreflex@4a0dd000 {
+		compatible = "ti,omap4-smartreflex-core";
+		reg = <0x4a0dd000 0x80>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_core";
+	};
+
+	smartreflex_mpu: smartreflex@4a0d9000 {
+		compatible = "ti,omap4-smartreflex-mpu";
+		reg = <0x4a0d9000 0x80>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "smartreflex_mpu";
+	};
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
new file mode 100644
index 0000000000..697333a56d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -0,0 +1,69 @@
+Specifying wakeup capability for devices
+============================================
+
+Any device nodes
+----------------
+Nodes that describe devices which has wakeup capability must contain an
+"wakeup-source" boolean property.
+
+Also, if device is marked as a wakeup source, then all the primary
+interrupt(s) can be used as wakeup interrupt(s).
+
+However if the devices have dedicated interrupt as the wakeup source
+then they need to specify/identify the same using device specific
+interrupt name. In such cases only that interrupt can be used as wakeup
+interrupt.
+
+List of legacy properties and respective binding document
+---------------------------------------------------------
+
+1. "gpio-key,wakeup"		Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
+2. "has-tpo"			Documentation/devicetree/bindings/rtc/rtc-opal.txt
+3. "linux,wakeup"		Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+				Documentation/devicetree/bindings/mfd/tc3589x.txt
+				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+
+Examples
+--------
+
+1. With "wakeup" interrupt name
+
+	device@10000 {
+		compatible	= "vendor,device-id";
+		reg		= <0x10000 0x1000>;
+		interrupts	= <0 19 4>, <0 21 4>, <0 22 4>;
+		interrupt-names	= "ack", "err", "wakeup";
+		wakeup-source;
+	};
+
+2. Without "wakeup" interrupt name
+
+	embedded-controller {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 0>;
+		interrupt-parent = <&gpx1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_irq>;
+		wakeup-source;
+	};
+
+3. Without interrupts
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <116>;
+			label = "POWER";
+			gpios = <&iofpga_gpio0 0 0x4>;
+		};
+		[....]
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
new file mode 100644
index 0000000000..940fd78e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/akebono.txt
@@ -0,0 +1,52 @@
+
+IBM Akebono board device tree
+=============================
+
+The IBM Akebono board is a development board for the PPC476GTR SoC.
+
+0) The root node
+
+   Required properties:
+
+   - model : "ibm,akebono".
+   - compatible : "ibm,akebono" , "ibm,476gtr".
+
+1.a) The Secure Digital Host Controller Interface (SDHCI) node
+
+  Represent the Secure Digital Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
+   - reg : should contain the SDHCI registers location and length.
+   - interrupts : should contain the SDHCI interrupt.
+
+1.b) The Advanced Host Controller Interface (AHCI) SATA node
+
+  Represents the advanced host controller SATA interface.
+
+  Required properties:
+
+   - compatible : should be "ibm,476gtr-ahci".
+   - reg : should contain the AHCI registers location and length.
+   - interrupts : should contain the AHCI interrupt.
+
+1.c) The FPGA node
+
+  The Akebono board stores some board information such as the revision
+  number in an FPGA which is represented by this node.
+
+  Required properties:
+
+   - compatible : should be "ibm,akebono-fpga".
+   - reg : should contain the FPGA registers location and length.
+
+1.d) The AVR node
+
+  The Akebono board has an Atmel AVR microprocessor attached to the I2C
+  bus as a power controller for the board.
+
+  Required properties:
+
+   - compatible : should be "ibm,akebono-avr".
+   - reg : should contain the I2C bus address for the AVR.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt b/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt
new file mode 100644
index 0000000000..ee459806d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/cpm.txt
@@ -0,0 +1,52 @@
+PPC4xx Clock Power Management (CPM) node
+
+Required properties:
+	- compatible		: compatible list, currently only "ibm,cpm"
+	- dcr-access-method	: "native"
+	- dcr-reg		: < DCR register range >
+
+Optional properties:
+	- er-offset		: All 4xx SoCs with a CPM controller have
+				  one of two different order for the CPM
+				  registers. Some have the CPM registers
+				  in the following order (ER,FR,SR). The
+				  others have them in the following order
+				  (SR,ER,FR). For the second case set
+				  er-offset = <1>.
+	- unused-units		: specifier consist of one cell. For each
+				  bit in the cell, the corresponding bit
+				  in CPM will be set to turn off unused
+				  devices.
+	- idle-doze		: specifier consist of one cell. For each
+				  bit in the cell, the corresponding bit
+				  in CPM will be set to turn off unused
+				  devices. This is usually just CPM[CPU].
+	- standby		: specifier consist of one cell. For each
+				  bit in the cell, the corresponding bit
+				  in CPM will be set on standby and
+				  restored on resume.
+	- suspend		: specifier consist of one cell. For each
+				  bit in the cell, the corresponding bit
+				  in CPM will be set on suspend (mem) and
+				  restored on resume. Note, for standby
+				  and suspend the corresponding bits can
+				  be different or the same. Usually for
+				  standby only class 2 and 3 units are set.
+				  However, the interface does not care.
+				  If they are the same, the additional
+				  power saving will be seeing if support
+				  is available to put the DDR in self
+				  refresh mode and any additional power
+				  saving techniques for the specific SoC.
+
+Example:
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		er-offset = <0>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff0000>;
+		suspend = <0xfeff791d>;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
new file mode 100644
index 0000000000..66dbd9ff56
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/hsta.txt
@@ -0,0 +1,18 @@
+
+ppc476gtr High Speed Serial Assist (HSTA) node
+==============================================
+
+The 476gtr SoC contains a high speed serial assist module attached
+between the plb4 and plb6 system buses to provide high speed data
+transfer between memory and system peripherals as well as support for
+PCI message signalled interrupts.
+
+Currently only the MSI support is used by Linux using the following
+device tree entries:
+
+Require properties:
+- compatible		: "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
+- reg			: register mapping for the HSTA MSI space
+- interrupts		: ordered interrupt mapping for each MSI in the register
+			  space. The first interrupt should be associated with a
+			  register offset of 0x00, the second to 0x10, etc.
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
new file mode 100644
index 0000000000..de6a5f7d4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/ppc440spe-adma.txt
@@ -0,0 +1,91 @@
+PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
+
+Device nodes needed for operation of the ppc440spe-adma driver
+are specified hereby. These are I2O/DMA, DMA and XOR nodes
+for DMA engines and Memory Queue Module node. The latter is used
+by ADMA driver for configuration of RAID-6 H/W capabilities of
+the PPC440SPe. In addition to the nodes and properties described
+below, the ranges property of PLB node must specify ranges for
+DMA devices.
+
+ i) The I2O node
+
+ Required properties:
+
+ - compatible		: "ibm,i2o-440spe";
+ - reg			: <registers mapping>
+ - dcr-reg		: <DCR registers range>
+
+ Example:
+
+	I2O: i2o@400100000 {
+		compatible = "ibm,i2o-440spe";
+		reg = <0x00000004 0x00100000 0x100>;
+		dcr-reg = <0x060 0x020>;
+	};
+
+
+ ii) The DMA node
+
+ Required properties:
+
+ - compatible		: "ibm,dma-440spe";
+ - cell-index		: 1 cell, hardware index of the DMA engine
+			  (typically 0x0 and 0x1 for DMA0 and DMA1)
+ - reg			: <registers mapping>
+ - dcr-reg		: <DCR registers range>
+ - interrupts		: <interrupt mapping for DMA0/1 interrupts sources:
+			   2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
+			   and DMA Error IRQ (on UIC1). The latter is common
+			   for both DMA engines>.
+
+ Example:
+
+	DMA0: dma0@400100100 {
+		compatible = "ibm,dma-440spe";
+		cell-index = <0>;
+		reg = <0x00000004 0x00100100 0x100>;
+		dcr-reg = <0x060 0x020>;
+		interrupt-parent = <&DMA0>;
+		interrupts = <0 1>;
+		#interrupt-cells = <1>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		interrupt-map = <
+			0 &UIC0 0x14 4
+			1 &UIC1 0x16 4>;
+	};
+
+
+ iii) XOR Accelerator node
+
+ Required properties:
+
+ - compatible		: "amcc,xor-accelerator";
+ - reg			: <registers mapping>
+ - interrupts		: <interrupt mapping for XOR interrupt source>
+
+ Example:
+
+	xor-accel@400200000 {
+		compatible = "amcc,xor-accelerator";
+		reg = <0x00000004 0x00200000 0x400>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <0x1f 4>;
+	};
+
+
+ iv) Memory Queue Module node
+
+ Required properties:
+
+ - compatible		: "ibm,mq-440spe";
+ - dcr-reg		: <DCR registers range>
+
+ Example:
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
new file mode 100644
index 0000000000..5bc6355131
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
@@ -0,0 +1,18 @@
+Reboot property to control system reboot on PPC4xx systems:
+
+By setting "reset_type" to one of the following values, the default
+software reset mechanism may be overridden. Here the possible values of
+"reset_type":
+
+      1 - PPC4xx core reset
+      2 - PPC4xx chip reset
+      3 - PPC4xx system reset (default)
+
+Example:
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			...
+			reset-type = <2>;	/* Use chip-reset */
+		};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
new file mode 100644
index 0000000000..454da7e08a
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ccf.txt
@@ -0,0 +1,46 @@
+Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding
+
+DESCRIPTION
+
+The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure
+that enables the implementation of coherent, multicore systems.
+
+Required properties:
+
+- compatible: <string list>
+		fsl,corenet1-cf - CoreNet coherency fabric version 1.
+		Example chips: T4240, B4860
+
+		fsl,corenet2-cf - CoreNet coherency fabric version 2.
+		Example chips: P5040, P5020, P4080, P3041, P2041
+
+		fsl,corenet-cf - Used to represent the common registers
+		between CCF version 1 and CCF version 2.  This compatible
+		is retained for compatibility reasons, as it was already
+		used for both CCF version 1 chips and CCF version 2
+		chips.  It should be specified after either
+		"fsl,corenet1-cf" or "fsl,corenet2-cf".
+
+- reg: <prop-encoded-array>
+		A standard property. Represents the CCF registers.
+
+- interrupts: <prop-encoded-array>
+		Interrupt mapping for CCF error interrupt.
+
+- fsl,ccf-num-csdids: <u32>
+		Specifies the number of Coherency Subdomain ID Port Mapping
+		Registers that are supported by the CCF.
+
+- fsl,ccf-num-snoopids: <u32>
+		Specifies the number of Snoop ID Port Mapping Registers that
+		are supported by CCF.
+
+Example:
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
new file mode 100644
index 0000000000..4787db8de2
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -0,0 +1,33 @@
+===================================================================
+Power Architecture CPU Binding
+Copyright 2013 Freescale Semiconductor Inc.
+
+Power Architecture CPUs in Freescale SOCs are represented in device trees as
+per the definition in the Devicetree Specification.
+
+In addition to the Devicetree Specification definitions, the properties
+defined below may be present on CPU nodes.
+
+PROPERTIES
+
+   - fsl,eref-*
+        Usage: optional
+        Value type: <empty>
+        Definition: The EREF (EREF: A Programmer.s Reference Manual for
+	Freescale Power Architecture) defines the architecture for Freescale
+	Power CPUs.  The EREF defines some architecture categories not defined
+	by the Power ISA.  For these EREF-specific categories, the existence of
+	a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
+	name with all uppercase letters converted to lowercase, indicates that
+	the category is supported by the implementation.
+
+    - fsl,portid-mapping
+	Usage: optional
+	Value type: <u32>
+	Definition: The Coherency Subdomain ID Port Mapping Registers and
+	Snoop ID Port Mapping registers, which are part of the CoreNet
+	Coherency fabric (CCF), provide a CoreNet Coherency Subdomain
+	ID/CoreNet Snoop ID to cpu mapping functions.  Certain bits from
+	these registers should be set if the corresponding CPU should be
+	snooped.  This property defines a bitmask which selects the bit
+	that should be set if this cpu should be snooped.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
new file mode 100644
index 0000000000..62744afb5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -0,0 +1,388 @@
+===================================================================
+Debug Control and Status Register (DCSR) Binding
+Copyright 2011 Freescale Semiconductor Inc.
+
+NOTE: The bindings described in this document are preliminary and subject
+to change.  Some of the compatible strings that contain only generic names
+may turn out to be inappropriate, or need additional properties to describe
+the integration of the block with the rest of the chip.
+
+=====================================================================
+Debug Control and Status Register Memory Map
+
+Description
+
+This node defines the base address and range for the
+defined DCSR Memory Map. Child nodes will describe the individual
+debug blocks defined within this memory space.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr" and "simple-bus".
+	The DCSR space exists in the memory-mapped bus.
+
+	- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing physical addresses in child nodes.
+
+	- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Defines the number of cells
+	or representing the size of physical addresses in
+	child nodes.
+
+	- ranges
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Specifies the physical address
+	range of the DCSR space.
+
+EXAMPLE
+	dcsr: dcsr@f00000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,dcsr", "simple-bus";
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+=====================================================================
+Event Processing Unit
+
+This node represents the region of DCSR space allocated to the EPU
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-epu"
+
+	- interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by the EPU.
+	The value of the interrupts property consists of three
+	interrupt specifiers. The format of the specifier is defined
+	by the binding document describing the node's interrupt parent.
+
+	The EPU counters can be configured to assert the performance
+	monitor interrupt signal based on either counter overflow or value
+	match. Which counter asserted the interrupt is captured in an EPU
+	Counter Interrupt Status Register (EPCPUISR).
+
+	The EPU unit can also be configured to assert either or both of
+	two interrupt signals based on debug event sources within the SoC.
+	The interrupt signals are epu_xt_int0 and epu_xt_int1.
+	Which event source asserted the interrupt is captured in an EPU
+	Interrupt Status Register (EPISR0,EPISR1).
+
+	Interrupt numbers are listed in order (perfmon, event0, event1).
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		interrupt-parent = <&mpic>;
+		reg = <0x0 0x1000>;
+	};
+
+=======================================================================
+Nexus Port Controller
+
+This node represents the region of DCSR space allocated to the NPC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-npc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The Nexus Port controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the Nexus Port Controller
+	control and status registers.
+
+	The second register range describes the Nexus Port Controller
+	internal trace buffer. The NPC trace buffer is a small memory buffer
+	which stages the nexus trace data for transmission via the Aurora port
+	or to a DDR based trace buffer. In some configurations the NPC trace
+	buffer can be the only trace buffer used.
+
+
+EXAMPLE
+		dcsr-npc {
+			compatible = "fsl,dcsr-npc";
+			reg = <0x1000 0x1000 0x1000000 0x8000>;
+		};
+
+=======================================================================
+Nexus Concentrator
+
+This node represents the region of DCSR space allocated to the NXC
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-nxc"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nxc@2000 {
+			compatible = "fsl,dcsr-nxc";
+			reg = <0x2000 0x1000>;
+		};
+=======================================================================
+CoreNet Debug Controller
+
+This node represents the region of DCSR space allocated to
+the CoreNet Debug controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-corenet"
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+	The CoreNet Debug controller occupies two regions in the DCSR space
+	with distinct functionality.
+
+	The first register range describes the CoreNet Debug Controller
+	functionality to perform transaction and transaction attribute matches.
+
+	The second register range describes the CoreNet Debug Controller
+	functionality to trigger event notifications and debug traces.
+
+EXAMPLE
+		dcsr-corenet {
+			compatible = "fsl,dcsr-corenet";
+			reg = <0x8000 0x1000 0xB0000 0x1000>;
+		};
+
+=======================================================================
+Data Path Debug controller
+
+This node represents the region of DCSR space allocated to
+the DPAA Debug Controller. This controller controls debug configuration
+for the QMAN and FMAN blocks.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-dpaa" in addition to the
+	generic compatible string "fsl,dcsr-dpaa".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-dpaa@9000 {
+			compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+			reg = <0x9000 0x1000>;
+		};
+
+=======================================================================
+OCeaN Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-ocn" in addition to the
+	generic compatible string "fsl,dcsr-ocn".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ocn@11000 {
+			compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+			reg = <0x11000 0x1000>;
+		};
+
+=======================================================================
+DDR Controller Debug controller
+
+This node represents the region of DCSR space allocated to
+the OCN Debug Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,dcsr-ddr"
+
+	- dev-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its
+	component controller.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-ddr@12000 {
+			compatible = "fsl,dcsr-ddr";
+			dev-handle = <&ddr1>;
+			reg = <0x12000 0x1000>;
+		};
+
+=======================================================================
+Nexus Aurora Link Controller
+
+This node represents the region of DCSR space allocated to
+the NAL Controller.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-nal" in addition to the
+	generic compatible string "fsl,dcsr-nal".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-nal@18000 {
+			compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+			reg = <0x18000 0x1000>;
+		};
+
+
+=======================================================================
+Run Control and Power Management
+
+This node represents the region of DCSR space allocated to
+the RCPM Debug Controller. This functionlity is limited to the
+control the debug operations of the SoC and cores.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the SoC
+	or Debug IP of the form "fsl,<soc>-dcsr-rcpm" in addition to the
+	generic compatible string "fsl,dcsr-rcpm".
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-rcpm@22000 {
+			compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+			reg = <0x22000 0x1000>;
+		};
+
+=======================================================================
+Core Service Bridge Proxy
+
+This node represents the region of DCSR space allocated to
+the Core Service Bridge Proxies.
+There is one Core Service Bridge Proxy device for each CPU in the system.
+This functionlity provides access to the debug operations of the CPU.
+
+PROPERTIES
+
+	- compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include both an identifier specific to the cpu
+	of the form "fsl,dcsr-<cpu>-sb-proxy" in addition to the
+	generic compatible string "fsl,dcsr-cpu-sb-proxy".
+
+	- cpu-handle
+	Usage: required
+	Definition: A phandle to associate this debug node with its cpu.
+
+	- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address
+	offset and length of the DCSR space registers of the device
+	configuration block.
+
+EXAMPLE
+		dcsr-cpu-sb-proxy@40000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu0>;
+			reg = <0x40000 0x1000>;
+		};
+		dcsr-cpu-sb-proxy@41000 {
+			compatible = "fsl,dcsr-e500mc-sb-proxy",
+				     "fsl,dcsr-cpu-sb-proxy";
+			cpu-handle = <&cpu1>;
+			reg = <0x41000 0x1000>;
+		};
+
+=======================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/diu.txt b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
new file mode 100644
index 0000000000..eb45db1ece
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/diu.txt
@@ -0,0 +1,32 @@
+* Freescale Display Interface Unit
+
+The Freescale DIU is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
+- reg : should contain at least address and length of the DIU register
+  set.
+- interrupts : one DIU interrupt should be described here.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
+
+Example (MPC8610HPCD):
+	display@2c000 {
+		compatible = "fsl,diu";
+		reg = <0x2c000 100>;
+		interrupts = <72 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+Example for MPC5121:
+	display@2100 {
+		compatible = "fsl,mpc5121-diu";
+		reg = <0x2100 0x100>;
+		interrupts = <64 0x8>;
+		interrupt-parent = <&ipic>;
+		edid = [edid-data];
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
new file mode 100644
index 0000000000..c11ad5c6db
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -0,0 +1,204 @@
+* Freescale DMA Controllers
+
+** Freescale Elo DMA Controller
+   This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+   series chips such as mpc8315, mpc8349, mpc8379 etc.
+
+Required properties:
+
+- compatible        : must include "fsl,elo-dma"
+- reg               : DMA General Status Register, i.e. DGSR which contains
+                      status for all the 4 DMA channels
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+- cell-index        : controller index.  0 for controller @ 0x8100
+- interrupts        : interrupt specifier for DMA IRQ
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,elo-dma-channel"
+                              However, see note below.
+        - reg               : DMA channel specific registers
+        - cell-index        : DMA channel index starts at 0.
+
+Optional properties:
+        - interrupts        : interrupt specifier for DMA channel IRQ
+                              (on 83xx this is expected to be identical to
+                              the interrupts property of the parent node)
+
+Example:
+	dma@82a8 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+		reg = <0x82a8 4>;
+		ranges = <0 0x8100 0x1a4>;
+		interrupt-parent = <&ipic>;
+		interrupts = <71 8>;
+		cell-index = <0>;
+		dma-channel@0 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <0>;
+			reg = <0 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+		dma-channel@80 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <1>;
+			reg = <0x80 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+		dma-channel@100 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <2>;
+			reg = <0x100 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+		dma-channel@180 {
+			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+			cell-index = <3>;
+			reg = <0x180 0x80>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+		};
+	};
+
+** Freescale EloPlus DMA Controller
+   This is a 4-channel DMA controller with extended addresses and chaining,
+   mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+   mpc8540, mpc8641 p4080, bsc9131 etc.
+
+Required properties:
+
+- compatible        : must include "fsl,eloplus-dma"
+- reg               : DMA General Status Register, i.e. DGSR which contains
+                      status for all the 4 DMA channels
+- cell-index        : controller index.  0 for controller @ 0x21000,
+                                         1 for controller @ 0xc000
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,eloplus-dma-channel"
+                              However, see note below.
+        - cell-index        : DMA channel index starts at 0.
+        - reg               : DMA channel specific registers
+        - interrupts        : interrupt specifier for DMA channel IRQ
+
+Example:
+	dma@21300 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+		reg = <0x21300 4>;
+		ranges = <0 0x21100 0x200>;
+		cell-index = <0>;
+		dma-channel@0 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0 0x80>;
+			cell-index = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <20 2>;
+		};
+		dma-channel@80 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0x80 0x80>;
+			cell-index = <1>;
+			interrupt-parent = <&mpic>;
+			interrupts = <21 2>;
+		};
+		dma-channel@100 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0x100 0x80>;
+			cell-index = <2>;
+			interrupt-parent = <&mpic>;
+			interrupts = <22 2>;
+		};
+		dma-channel@180 {
+			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+			reg = <0x180 0x80>;
+			cell-index = <3>;
+			interrupt-parent = <&mpic>;
+			interrupts = <23 2>;
+		};
+	};
+
+** Freescale Elo3 DMA Controller
+   DMA controller which has same function as EloPlus except that Elo3 has 8
+   channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+   series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible        : must include "fsl,elo3-dma"
+- reg               : contains two entries for DMA General Status Registers,
+                      i.e. DGSR0 which includes status for channel 1~4, and
+                      DGSR1 for channel 5~8
+- ranges            : describes the mapping between the address space of the
+                      DMA channels and the address space of the DMA controller
+
+- DMA channel nodes:
+        - compatible        : must include "fsl,eloplus-dma-channel"
+        - reg               : DMA channel specific registers
+        - interrupts        : interrupt specifier for DMA channel IRQ
+
+Example:
+dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x100300 0x4>,
+	      <0x100600 0x4>;
+	ranges = <0x0 0x100100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <31 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <79 2 0 0>;
+	};
+};
+
+Note on DMA channel compatible properties: The compatible property must say
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA
+driver (fsldma).  Any DMA channel used by fsldma cannot be used by another
+DMA driver, such as the SSI sound drivers for the MPC8610.  Therefore, any DMA
+channel that should be used for another driver should not use
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel".  For the SSI drivers, for
+example, the compatible property should be "fsl,ssi-dma-channel".  See ssi.txt
+for more information.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
new file mode 100644
index 0000000000..76dc547bc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/ecm.txt
@@ -0,0 +1,60 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,ecm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+      CHIP is the processor (mpc8572, mpc8544, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
new file mode 100644
index 0000000000..ed6a414b2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt
@@ -0,0 +1,309 @@
+===============================================================================
+Freescale Interlaken Look-Aside Controller Device Bindings
+Copyright 2012 Freescale Semiconductor Inc.
+
+CONTENTS
+  - Interlaken Look-Aside Controller (LAC) Node
+  - Example LAC Node
+  - Interlaken Look-Aside Controller (LAC) Software Portal Node
+  - Interlaken Look-Aside Controller (LAC) Software Portal Child Nodes
+  - Example LAC SWP Node with Child Nodes
+
+==============================================================================
+Interlaken Look-Aside Controller (LAC) Node
+
+DESCRIPTION
+
+The Interlaken is a narrow, high speed channelized chip-to-chip interface. To
+facilitate interoperability between a data path device and a look-aside
+co-processor, the Interlaken Look-Aside protocol is defined for short
+transaction-related transfers. Although based on the Interlaken protocol,
+Interlaken Look-Aside is not directly compatible with Interlaken and can be
+considered a different operation mode.
+
+The Interlaken LA controller connects internal platform to Interlaken serial
+interface. It accepts LA command through software portals, which are system
+memory mapped 4KB spaces. The LA commands are then translated into the
+Interlaken control words and data words, which are sent on TX side to TCAM
+through SerDes lanes.
+
+There are two 4KiB spaces defined within the LAC global register memory map.
+There is a full register set at 0x0000-0x0FFF (also known as the "hypervisor"
+version), and a subset at 0x1000-0x1FFF.  The former is a superset of the
+latter, and includes certain registers that should not be accessible to
+partitioned software.  Separate nodes are used for each region, with a phandle
+linking the hypervisor node to the normal operating node.
+
+PROPERTIES
+
+  - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,interlaken-lac". This represents only
+		those LAC CCSR registers not protected in partitioned
+		software. The version of the device is determined by the LAC
+		IP Block Revision Register (IPBRR0) at offset 0x0BF8.
+
+		Table of correspondences between IPBRR0 values and example
+		chips:
+			Value		Device
+			-----------	-------
+			0x02000100	T4240
+
+		The Hypervisor node has a different compatible. It must include
+		"fsl,interlaken-lac-hv". This node represents the protected
+		LAC register space and is required except inside a partition
+		where access to the hypervisor node is to be denied.
+
+  - fsl,non-hv-node
+	Usage: required in "fsl,interlaken-lac-hv"
+	Value type: <phandle>
+	Definition: Points to the non-protected LAC CCSR mapped register space
+		node.
+
+  - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. The first resource represents the
+		Interlaken LAC configuration registers.
+
+  - interrupts:
+	Usage: required in non-hv node only
+	Value type: <prop-encoded-array>
+	Definition: Interrupt mapping for Interlaken LAC error IRQ.
+
+EXAMPLE
+	lac: lac@229000 {
+		compatible = "fsl,interlaken-lac"
+		reg = <0x229000 0x1000>;
+		interrupts = <16 2 1 18>;
+	};
+
+	lac-hv@228000 {
+		compatible = "fsl,interlaken-lac-hv"
+		reg = <0x228000 0x1000>;
+		fsl,non-hv-node = <&lac>;
+	};
+
+===============================================================================
+Interlaken Look-Aside Controller (LAC) Software Portal Container Node
+
+DESCRIPTION
+The Interlaken Look-Aside Controller (LAC) utilizes Software Portals to accept
+Interlaken Look-Aside (ILA) commands. The Interlaken LAC software portal
+memory map occupies 128KB of memory space. The software portal memory space is
+intended to be cache-enabled. WIMG for each software space is required to be
+0010 if stashing is enabled; otherwise, WIMG can be 0000 or 0010.
+
+PROPERTIES
+
+  - #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property. Must have a value of 1.
+
+  - #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property. Must have a value of 1.
+
+  - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,interlaken-lac-portals"
+
+  - ranges
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Specifies the address and length
+		of the LAC portal memory space.
+
+===============================================================================
+Interlaken Look-Aside Controller (LAC) Software Portals Child Nodes
+
+DESCRIPTION
+There are up to 24 available software portals with each software portal
+requiring 4KB of consecutive memory within the software portal memory mapped
+space.
+
+PROPERTIES
+
+  - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,interlaken-lac-portal-vX.Y" where X is
+		the Major version (IP_MJ) found in the LAC IP Block Revision
+		Register (IPBRR0), at offset 0x0BF8, and Y is the Minor version
+		(IP_MN).
+
+		Table of correspondences between version values and example chips:
+		    Value	Device
+		    ------	-------
+		      1.0	T4240
+
+  - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  The first resource represents the
+		Interlaken LAC software portal registers.
+
+  - fsl,liodn
+	Value type: <u32>
+	Definition: The logical I/O device number (LIODN) for this device.  The
+		LIODN is a number expressed by this device and used to perform
+		look-ups in the IOMMU (PAMU) address table when performing
+		DMAs. This property is automatically added by u-boot.
+
+===============================================================================
+EXAMPLE
+
+lac-portals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "fsl,interlaken-lac-portals";
+	ranges = <0x0 0xf 0xf4400000 0x20000>;
+
+	lportal0: lac-portal@0 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x204>;
+		reg = <0x0 0x1000>;
+	};
+
+	lportal1: lac-portal@1000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x205>;
+		reg = <0x1000 0x1000>;
+	};
+
+	lportal2: lac-portal@2000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x206>;
+		reg = <0x2000 0x1000>;
+	};
+
+	lportal3: lac-portal@3000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x207>;
+		reg = <0x3000 0x1000>;
+	};
+
+	lportal4: lac-portal@4000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x208>;
+		reg = <0x4000 0x1000>;
+	};
+
+	lportal5: lac-portal@5000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x209>;
+		reg = <0x5000 0x1000>;
+	};
+
+	lportal6: lac-portal@6000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20A>;
+		reg = <0x6000 0x1000>;
+	};
+
+	lportal7: lac-portal@7000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20B>;
+		reg = <0x7000 0x1000>;
+	};
+
+	lportal8: lac-portal@8000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20C>;
+		reg = <0x8000 0x1000>;
+	};
+
+	lportal9: lac-portal@9000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20D>;
+		reg = <0x9000 0x1000>;
+	};
+
+	lportal10: lac-portal@a000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20E>;
+		reg = <0xA000 0x1000>;
+	};
+
+	lportal11: lac-portal@b000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x20F>;
+		reg = <0xB000 0x1000>;
+	};
+
+	lportal12: lac-portal@c000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x210>;
+		reg = <0xC000 0x1000>;
+	};
+
+	lportal13: lac-portal@d000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x211>;
+		reg = <0xD000 0x1000>;
+	};
+
+	lportal14: lac-portal@e000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x212>;
+		reg = <0xE000 0x1000>;
+	};
+
+	lportal15: lac-portal@f000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x213>;
+		reg = <0xF000 0x1000>;
+	};
+
+	lportal16: lac-portal@10000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x214>;
+		reg = <0x10000 0x1000>;
+	};
+
+	lportal17: lac-portal@11000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x215>;
+		reg = <0x11000 0x1000>;
+	};
+
+	lportal8: lac-portal@1200 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x216>;
+		reg = <0x12000 0x1000>;
+	};
+
+	lportal19: lac-portal@13000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x217>;
+		reg = <0x13000 0x1000>;
+	};
+
+	lportal20: lac-portal@14000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x218>;
+		reg = <0x14000 0x1000>;
+	};
+
+	lportal21: lac-portal@15000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x219>;
+		reg = <0x15000 0x1000>;
+	};
+
+	lportal22: lac-portal@16000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x21A>;
+		reg = <0x16000 0x1000>;
+	};
+
+	lportal23: lac-portal@17000 {
+		compatible = "fsl,interlaken-lac-portal-v1.0";
+		fsl,liodn = <0x21B>;
+		reg = <0x17000 0x1000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
new file mode 100644
index 0000000000..1c80fcedeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
@@ -0,0 +1,43 @@
+* Chipselect/Local Bus
+
+Properties:
+- name : Should be localbus
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- ranges : Each range corresponds to a single chipselect, and cover
+           the entire access window as configured.
+
+Example:
+	localbus@f0010100 {
+		compatible = "fsl,mpc8272-localbus",
+			   "fsl,pq2-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf4500000 0x00008000
+			  0x2 0x0 0xfd810000 0x00010000>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20>;
+			compatible = "fsl,mpc8272ads-bcsr";
+		};
+
+		simple-periph@2,0 {
+			compatible = "fsl,elbc-gpcm-uio";
+			reg = <0x2 0x0 0x10000>;
+			elbc-gpcm-br = <0xfd810800>;
+			elbc-gpcm-or = <0xffff09f7>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
new file mode 100644
index 0000000000..a5dae6b1f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcm.txt
@@ -0,0 +1,60 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured.  For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,mcm-law"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+  - fsl,num-laws
+      Usage: required
+      Value type: <u32>
+      Definition: The value specifies the number of local access
+          windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+      CHIP is the processor (mpc8641, mpc8610, etc.)
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  The value specifies the
+          physical address offset and length of the CCSR space
+          registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop-encoded-array>
+
+=====================================================================
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
new file mode 100644
index 0000000000..37f91fa576
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt
@@ -0,0 +1,17 @@
+Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
+
+Required properties:
+- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
+- reg : should specify I2C address (0x0a).
+- #gpio-cells : should be 2.
+- gpio-controller : should be present.
+
+Example:
+
+mcu@a {
+	#gpio-cells = <2>;
+	compatible = "fsl,mc9s08qg8-mpc8349emitx",
+		     "fsl,mcu-mpc8349emitx";
+	reg = <0x0a>;
+	gpio-controller;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
new file mode 100644
index 0000000000..5dfd68f1a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt
@@ -0,0 +1,78 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is required there:
+
+fsl,mpc512x-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
+   Supported <soc>s: mpc5121, mpc5125
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+PSC in SPI mode
+---------------
+
+Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
+for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
+The required and recommended properties are identical to the
+fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
+string.
+
+fsl,mpc512x-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,<soc>-psc-fifo"
+   Supported <soc>s: mpc5121, mpc5125
+ - reg : Offset and length of the register set for the PSC
+         FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+   PSC FIFO Controller and b is a field that represents an
+   encoding of the sense and level information for the interrupt.
+
+Recommended properties :
+ - clocks : specifies the clock needed to operate the fifo controller
+ - clock-names : name(s) for the clock(s) listed in clocks
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <0>;
+	reg = <0x11000 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+	compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+	cell-index = <1>;
+	reg = <0x11100 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+	fsl,rx-fifo-size = <16>;
+	fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+	compatible = "fsl,mpc5121-psc-fifo";
+	reg = <0x11f00 0x100>;
+	interrupts = <40 0x8>;
+	interrupt-parent = < &ipic >;
+};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
new file mode 100644
index 0000000000..b3b392fe1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt
@@ -0,0 +1,21 @@
+Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual)
+
+Required properties:
+- compatible: should be "fsl,mpc512x-lpbfifo";
+- reg: should contain the offset and length of SCLPC register set;
+- interrupts: should contain the interrupt specifier for SCLPC; syntax of an
+    interrupt client node is described in interrupt-controller/interrupts.txt;
+- dmas: should contain the DMA specifier for SCLPC as described at
+    dma/dma.txt and dma/mpc512x-dma.txt;
+- dma-names: should be "rx-tx";
+
+Example:
+
+	sclpc@10100 {
+		compatible = "fsl,mpc512x-lpbfifo";
+		reg = <0x10100 0x50>;
+		interrupts = <7 0x8>;
+		dmas = <&dma0 26>;
+		dma-names = "rx-tx";
+	};
+
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
new file mode 100644
index 0000000000..4571c857db
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
@@ -0,0 +1,198 @@
+MPC5200 Device Tree Bindings
+----------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+Naming conventions
+------------------
+For mpc5200 on-chip devices, the format for each compatible value is
+<chip>-<device>[-<mode>].  The OS should be able to match a device driver
+to the device based solely on the compatible value.  If two drivers
+match on the compatible list; the 'most compatible' driver should be
+selected.
+
+The split between the MPC5200 and the MPC5200B leaves a bit of a
+conundrum.  How should the compatible property be set up to provide
+maximum compatibility information; but still accurately describe the
+chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
+originally appeared on the MPC5200.  Since they didn't exist anywhere
+else; the 5200 compatible properties will contain only one item;
+"fsl,mpc5200-<device>".
+
+The 5200B is almost the same as the 5200, but not quite.  It fixes
+silicon bugs and it adds a small number of enhancements.  Most of the
+devices either provide exactly the same interface as on the 5200.  A few
+devices have extra functions but still have a backwards compatible mode.
+To express this information as completely as possible, 5200B device trees
+should have two items in the compatible list:
+	compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
+
+It is *strongly* recommended that 5200B device trees follow this convention
+(instead of only listing the base mpc5200 item).
+
+ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
+    ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
+
+Modal devices, like PSCs, also append the configured function to the
+end of the compatible field.  ie. A PSC in i2s mode would specify
+"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s".  This convention is chosen to
+avoid naming conflicts with non-psc devices providing the same
+function.  For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
+the mpc5200 simple spi device and a PSC spi mode respectively.
+
+At the time of writing, exact chip may be either 'fsl,mpc5200' or
+'fsl,mpc5200b'.
+
+The soc node
+------------
+This node describes the on chip SOC peripherals.  Every mpc5200 based
+board will have this node, and as such there is a common naming
+convention for SOC devices.
+
+Required properties:
+name			description
+----			-----------
+ranges			Memory range of the internal memory mapped registers.
+			Should be <0 [baseaddr] 0xc000>
+reg			Should be <[baseaddr] 0x100>
+compatible		mpc5200: "fsl,mpc5200-immr"
+			mpc5200b: "fsl,mpc5200b-immr"
+system-frequency	'fsystem' frequency in Hz; XLB, IPB, USB and PCI
+			clocks are derived from the fsystem clock.
+bus-frequency		IPB bus frequency in Hz.  Clock rate
+			used by most of the soc devices.
+
+soc child nodes
+---------------
+Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+
+Note: The tables below show the value for the mpc5200.  A mpc5200b device
+tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
+
+Required soc5200 child nodes:
+name				compatible		Description
+----				----------		-----------
+cdm@<addr>			fsl,mpc5200-cdm		Clock Distribution
+interrupt-controller@<addr>	fsl,mpc5200-pic		need an interrupt
+							controller to boot
+bestcomm@<addr>			fsl,mpc5200-bestcomm	Bestcomm DMA controller
+
+Recommended soc5200 child nodes; populate as needed for your board
+name		compatible		Description
+----		----------		-----------
+timer@<addr>	fsl,mpc5200-gpt		 General purpose timers
+gpio@<addr>	fsl,mpc5200-gpio	 MPC5200 simple gpio controller
+gpio@<addr>	fsl,mpc5200-gpio-wkup	 MPC5200 wakeup gpio controller
+rtc@<addr>	fsl,mpc5200-rtc		 Real time clock
+mscan@<addr>	fsl,mpc5200-mscan	 CAN bus controller
+pci@<addr>	fsl,mpc5200-pci		 PCI bridge
+serial@<addr>	fsl,mpc5200-psc-uart	 PSC in serial mode
+i2s@<addr>	fsl,mpc5200-psc-i2s	 PSC in i2s mode
+ac97@<addr>	fsl,mpc5200-psc-ac97	 PSC in ac97 mode
+spi@<addr>	fsl,mpc5200-psc-spi	 PSC in spi mode
+irda@<addr>	fsl,mpc5200-psc-irda	 PSC in IrDA mode
+spi@<addr>	fsl,mpc5200-spi		 MPC5200 spi device
+ethernet@<addr>	fsl,mpc5200-fec		 MPC5200 ethernet device
+ata@<addr>	fsl,mpc5200-ata		 IDE ATA interface
+i2c@<addr>	fsl,mpc5200-i2c		 I2C controller
+usb@<addr>	fsl,mpc5200-ohci,ohci-be USB controller
+xlb@<addr>	fsl,mpc5200-xlb		 XLB arbitrator
+
+fsl,mpc5200-gpt nodes
+---------------------
+On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
+design supports the internal wdt, then the device node for GPT0 should
+include the empty property 'fsl,has-wdt'.  Note that this does not activate
+the watchdog.  The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used.  The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+	fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds.  If n=0, the
+configuration of the watchdog is not touched.  This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+  the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
+
+An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
+add the following properties to the gpt node:
+	gpio-controller;
+	#gpio-cells = <2>;
+When referencing the GPIO line from another node, the first cell must always
+be zero and the second cell represents the gpio flags and described in the
+gpio device tree binding.
+
+An mpc5200-gpt can be used as a single line edge sensitive interrupt
+controller.  To do so, add the following properties to the gpt node:
+	interrupt-controller;
+	#interrupt-cells = <1>;
+When referencing the IRQ line from another node, the cell represents the
+sense mode; 1 for edge rising, 2 for edge falling.
+
+fsl,mpc5200-psc nodes
+---------------------
+The PSCs should include a cell-index which is the index of the PSC in
+hardware.  cell-index is used to determine which shared SoC registers to
+use when setting up PSC clocking.  cell-index number starts at '0'.  ie:
+	PSC1 has 'cell-index = <0>'
+	PSC4 has 'cell-index = <3>'
+
+PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
+i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+compatible field.
+
+
+fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
+------------------------------------------------
+Each GPIO controller node should have the empty property gpio-controller and
+#gpio-cells set to 2. First cell is the GPIO number which is interpreted
+according to the bit numbers in the GPIO control registers. The second cell
+is for flags which is currently unused.
+
+fsl,mpc5200-fec nodes
+---------------------
+The FEC node can specify one of the following properties to configure
+the MII link:
+- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
+                    mode instead of MII
+- current-speed   - Specifies that the MII should be configured for a fixed
+                    speed.  This property should contain two cells.  The
+                    first cell specifies the speed in Mbps and the second
+                    should be '0' for half duplex and '1' for full duplex
+- phy-handle      - Contains a phandle to an Ethernet PHY.
+
+Interrupt controller (fsl,mpc5200-pic) node
+-------------------------------------------
+The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
+split reflects the layout of the PIC hardware itself, which groups
+interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
+Bestcomm dma engine has its own set of interrupt sources which are
+cascaded off of peripheral interrupt 0, which the driver interprets as a
+fourth group, SDMA.
+
+The interrupts property for device nodes using the mpc5200 pic consists
+of three cells; <L1 L2 level>
+
+    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+    L2 := interrupt number; directly mapped from the value in the
+          "ICTL PerStat, MainStat, CritStat Encoded Register"
+    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+
+For external IRQs, use the following interrupt property values (how to
+specify external interrupts is a frequently asked question):
+External interrupts:
+	external irq0:	interrupts = <0 0 n>;
+	external irq1:	interrupts = <1 1 n>;
+	external irq2:	interrupts = <1 2 n>;
+	external irq3:	interrupts = <1 3 n>;
+'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
+
+fsl,mpc5200-mscan nodes
+-----------------------
+See file Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
new file mode 100644
index 0000000000..bc8ded641a
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt
@@ -0,0 +1,63 @@
+* FSL MPIC Message Registers
+
+This binding specifies what properties must be available in the device tree
+representation of the message register blocks found in some FSL MPIC
+implementations.
+
+Required properties:
+
+    - compatible: Specifies the compatibility list for the message register
+      block.  The type shall be <string-list> and the value shall be of the form
+      "fsl,mpic-v<version>-msgr", where <version> is the version number of
+      the MPIC containing the message registers.
+
+    - reg: Specifies the base physical address(s) and size(s) of the
+      message register block's addressable register space.  The type shall be
+      <prop-encoded-array>.
+
+    - interrupts: Specifies a list of interrupt-specifiers which are available
+      for receiving interrupts. Interrupt-specifier consists of two cells: first
+      cell is interrupt-number and second cell is level-sense. The type shall be
+      <prop-encoded-array>.
+
+Optional properties:
+
+    - mpic-msgr-receive-mask: Specifies what registers in the containing block
+      are allowed to receive interrupts. The value is a bit mask where a set
+      bit at bit 'n' indicates that message register 'n' can receive interrupts.
+      Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
+      be <u32>. If not present, then all of the message registers in the block
+      are available.
+
+Aliases:
+
+    An alias should be created for every message register block.  They are not
+    required, though.  However, a particular implementation of this binding
+    may require aliases to be present.  Aliases are of the form
+    'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
+    Numbers shall start at 0.
+
+Example:
+
+	aliases {
+		mpic-msgr-block0 = &mpic_msgr_block0;
+		mpic-msgr-block1 = &mpic_msgr_block1;
+	};
+
+	mpic_msgr_block0: mpic-msgr-block@41400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x41400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb0 and 0xb2, respectively.
+		interrupts = <0xb0 2 0xb2 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};
+
+	mpic_msgr_block1: mpic-msgr-block@42400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x42400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb4 and 0xb6, respectively.
+		interrupts = <0xb4 2 0xb6 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
new file mode 100644
index 0000000000..df41958140
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
@@ -0,0 +1,38 @@
+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions.  The first is the main timer register bank
+  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+  register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If timer-available-ranges is present, only the
+  interrupts that correspond to available timers shall be present.
+
+Example:
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+
+		/* Another AMP partition is using timers 0 and 1 */
+		fsl,available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+	timer1: timer@42100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x42100 0x100 0x42300 4>;
+		interrupts = <4 0 3 0
+		              5 0 3 0
+		              6 0 3 0
+		              7 0 3 0>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
new file mode 100644
index 0000000000..dc5744636a
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt
@@ -0,0 +1,231 @@
+=====================================================================
+Freescale MPIC Interrupt Controller Node
+Copyright (C) 2010,2011 Freescale Semiconductor Inc.
+=====================================================================
+
+The Freescale MPIC interrupt controller is found on all PowerQUICC
+and QorIQ processors and is compatible with the Open PIC.  The
+notable difference from Open PIC binding is the addition of 2
+additional cells in the interrupt specifier defining interrupt type
+information.
+
+PROPERTIES
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Shall include "fsl,mpic".  Freescale MPIC
+          controllers compatible with this binding have Block
+          Revision Registers BRR1 and BRR2 at offset 0x0 and
+          0x10 in the MPIC.
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          offset and length of the device's registers within the
+          CCSR address space.
+
+  - interrupt-controller
+      Usage: required
+      Value type: <empty>
+      Definition: Specifies that this node is an interrupt
+          controller
+
+  - #interrupt-cells
+      Usage: required
+      Value type: <u32>
+      Definition: Shall be 2 or 4.  A value of 2 means that interrupt
+          specifiers do not contain the interrupt-type or type-specific
+          information cells.
+
+  - #address-cells
+      Usage: required
+      Value type: <u32>
+      Definition: Shall be 0.
+
+  - pic-no-reset
+      Usage: optional
+      Value type: <empty>
+      Definition: The presence of this property specifies that the
+          MPIC must not be reset by the client program, and that
+          the boot program has initialized all interrupt source
+          configuration registers to a sane state-- masked or
+          directed at other cores.  This ensures that the client
+          program will not receive interrupts for sources not belonging
+          to the client.  The presence of this property also mandates
+          that any initialization related to interrupt sources shall
+          be limited to sources explicitly referenced in the device tree.
+
+  - big-endian
+      Usage: optional
+      Value type: <empty>
+          If present the MPIC will be assumed to be big-endian.  Some
+          device-trees omit this property on MPIC nodes even when the MPIC is
+          in fact big-endian, so certain boards override this property.
+
+  - single-cpu-affinity
+      Usage: optional
+      Value type: <empty>
+          If present the MPIC will be assumed to only be able to route
+          non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC).
+
+  - last-interrupt-source
+      Usage: optional
+      Value type: <u32>
+          Some MPICs do not correctly report the number of hardware sources
+          in the global feature registers.  If specified, this field will
+          override the value read from MPIC_GREG_FEATURE_LAST_SRC.
+
+INTERRUPT SPECIFIER DEFINITION
+
+  Interrupt specifiers consists of 4 cells encoded as
+  follows:
+
+   <1st-cell>   interrupt-number
+
+                Identifies the interrupt source.  The meaning
+                depends on the type of interrupt.
+
+                Note: If the interrupt-type cell is undefined
+                (i.e. #interrupt-cells = 2), this cell
+                should be interpreted the same as for
+                interrupt-type 0-- i.e. an external or
+                normal SoC device interrupt.
+
+   <2nd-cell>   level-sense information, encoded as follows:
+                    0 = low-to-high edge triggered
+                    1 = active low level-sensitive
+                    2 = active high level-sensitive
+                    3 = high-to-low edge triggered
+
+   <3rd-cell>   interrupt-type
+
+                The following types are supported:
+
+                  0 = external or normal SoC device interrupt
+
+                      The interrupt-number cell contains
+                      the SoC device interrupt number.  The
+                      type-specific cell is undefined.  The
+                      interrupt-number is derived from the
+                      MPIC a block of registers referred to as
+                      the "Interrupt Source Configuration Registers".
+                      Each source has 32-bytes of registers
+                      (vector/priority and destination) in this
+                      region.   So interrupt 0 is at offset 0x0,
+                      interrupt 1 is at offset 0x20, and so on.
+
+                  1 = error interrupt
+
+                      The interrupt-number cell contains
+                      the SoC device interrupt number for
+                      the error interrupt.  The type-specific
+                      cell identifies the specific error
+                      interrupt number.
+
+                  2 = MPIC inter-processor interrupt (IPI)
+
+                      The interrupt-number cell identifies
+                      the MPIC IPI number.  The type-specific
+                      cell is undefined.
+
+                  3 = MPIC timer interrupt
+
+                      The interrupt-number cell identifies
+                      the MPIC timer number.  The type-specific
+                      cell is undefined.
+
+   <4th-cell>   type-specific information
+
+                The type-specific cell is encoded as follows:
+
+                 - For interrupt-type 1 (error interrupt),
+                   the type-specific cell contains the
+                   bit number of the error interrupt in the
+                   Error Interrupt Summary Register.
+
+EXAMPLE 1
+	/*
+	 * mpic interrupt controller with 4 cells per specifier
+	 */
+	mpic: pic@40000 {
+		compatible = "fsl,mpic";
+		interrupt-controller;
+		#interrupt-cells = <4>;
+		#address-cells = <0>;
+		reg = <0x40000 0x40000>;
+	};
+
+EXAMPLE 2
+	/*
+	 * The MPC8544 I2C controller node has an internal
+	 * interrupt number of 27.  As per the reference manual
+	 * this corresponds to interrupt source configuration
+	 * registers at 0x5_0560.
+	 *
+	 * The interrupt source configuration registers begin
+	 * at 0x5_0000.
+	 *
+	 * To compute the interrupt specifier interrupt number
+         *
+	 *       0x560 >> 5 = 43
+	 *
+	 * The interrupt source configuration registers begin
+	 * at 0x5_0000, and so the i2c vector/priority registers
+	 * are at 0x5_0560.
+	 */
+	i2c@3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <0>;
+		compatible = "fsl-i2c";
+		reg = <0x3000 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		dfsrr;
+	};
+
+
+EXAMPLE 3
+	/*
+	 *  Definition of a node defining the 4
+	 *  MPIC IPI interrupts.  Note the interrupt
+	 *  type of 2.
+	 */
+	ipi@410a0 {
+		compatible = "fsl,mpic-ipi";
+		reg = <0x40040 0x10>;
+		interrupts = <0 0 2 0
+		              1 0 2 0
+		              2 0 2 0
+		              3 0 2 0>;
+	};
+
+EXAMPLE 4
+	/*
+	 *  Definition of a node defining the MPIC
+	 *  global timers.  Note the interrupt
+	 *  type of 3.
+	 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+		interrupts = <0 0 3 0
+		              1 0 3 0
+		              2 0 3 0
+		              3 0 3 0>;
+	};
+
+EXAMPLE 5
+	/*
+	 * Definition of an error interrupt (interrupt type 1).
+	 * SoC interrupt number is 16 and the specific error
+         * interrupt bit in the error interrupt summary register
+	 * is 23.
+	 */
+	memory-controller@8000 {
+		compatible = "fsl,p4080-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
new file mode 100644
index 0000000000..f8d2b7fe06
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -0,0 +1,111 @@
+* Freescale MSI interrupt controller
+
+Required properties:
+- compatible : compatible list, may contain one or two entries
+  The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+  etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or
+  "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic
+  version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is
+  provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3"
+  should be used. The first entry is optional; the second entry is
+  required.
+
+- reg : It may contain one or two regions. The first region should contain
+  the address and the length of the shared message interrupt register set.
+  The second region should contain the address of aliased MSIIR or MSIIR1
+  register for platforms that have such an alias, if using MSIIR1, the second
+  region must be added because different MSI group has different MSIIR1 offset.
+
+- interrupts : each one of the interrupts here is one entry per 32 MSIs,
+  and routed to the host interrupt controller. the interrupts should
+  be set as edge sensitive.  If msi-available-ranges is present, only
+  the interrupts that correspond to available ranges shall be present.
+
+Optional properties:
+- msi-available-ranges: use <start count> style section to define which
+  msi interrupt can be used in the 256 msi interrupts. This property is
+  optional, without this, all the MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+  MPIC v4.3 does not support this property because the 32 interrupts of an
+  individual register are not continuous when using MSIIR1.
+
+- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register
+  is used for MSI messaging.  The address of MSIIR in PCI address space is
+  the MSI message address.
+
+  This property may be used in virtualized environments where the hypervisor
+  has created an alternate mapping for the MSIR block.  See below for an
+  explanation.
+
+
+Example:
+	msi@41600 {
+		compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+		reg = <0x41600 0x80>;
+		msi-available-ranges = <0 0x100>;
+		interrupts = <
+			0xe0 0
+			0xe1 0
+			0xe2 0
+			0xe3 0
+			0xe4 0
+			0xe5 0
+			0xe6 0
+			0xe7 0>;
+		interrupt-parent = <&mpic>;
+	};
+
+	msi@41600 {
+		compatible = "fsl,mpic-msi-v4.3";
+		reg = <0x41600 0x200 0x44148 4>;
+		interrupts = <
+			0xe0 0 0 0
+			0xe1 0 0 0
+			0xe2 0 0 0
+			0xe3 0 0 0
+			0xe4 0 0 0
+			0xe5 0 0 0
+			0xe6 0 0 0
+			0xe7 0 0 0
+			0x100 0 0 0
+			0x101 0 0 0
+			0x102 0 0 0
+			0x103 0 0 0
+			0x104 0 0 0
+			0x105 0 0 0
+			0x106 0 0 0
+			0x107 0 0 0>;
+	};
+
+The Freescale hypervisor and msi-address-64
+-------------------------------------------
+Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The
+Freescale MSI driver calculates the address of MSIIR (in the MSI register
+block) and sets that address as the MSI message address.
+
+In a virtualized environment, the hypervisor may need to create an IOMMU
+mapping for MSIIR.  The Freescale ePAPR hypervisor has this requirement
+because of hardware limitations of the Peripheral Access Management Unit
+(PAMU), which is currently the only IOMMU that the hypervisor supports.
+The ATMU is programmed with the guest physical address, and the PAMU
+intercepts transactions and reroutes them to the true physical address.
+
+In the PAMU, each PCI controller is given only one primary window.  The
+PAMU restricts DMA operations so that they can only occur within a window.
+Because PCI devices must be able to DMA to memory, the primary window must
+be used to cover all of the guest's memory space.
+
+PAMU primary windows can be divided into 256 subwindows, and each
+subwindow can have its own address mapping ("guest physical" to "true
+physical").  However, each subwindow has to have the same alignment, which
+means they cannot be located at just any address.  Because of these
+restrictions, it is usually impossible to create a 4KB subwindow that
+covers MSIIR where it's normally located.
+
+Therefore, the hypervisor has to create a subwindow inside the same
+primary window used for memory, but mapped to the MSIR block (where MSIIR
+lives).  The first subwindow after the end of guest memory is used for
+this.  The address specified in the msi-address-64 property is the PCI
+address of MSIIR.  The hypervisor configures the PAMU to map that address to
+the true physical address of MSIIR.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
new file mode 100644
index 0000000000..b21ab85de6
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt
@@ -0,0 +1,148 @@
+Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding
+
+DESCRIPTION
+
+The PAMU is an I/O MMU that provides device-to-memory access control and
+address translation capabilities.
+
+Required properties:
+
+- compatible	: <string>
+		  First entry is a version-specific string, such as
+		  "fsl,pamu-v1.0".  The second is "fsl,pamu".
+- ranges	: <prop-encoded-array>
+		  A standard property. Utilized to describe the memory mapped
+		  I/O space utilized by the controller.  The size should
+		  be set to the total size of the register space of all
+		  physically present PAMU controllers.  For example, for
+		  PAMU v1.0, on an SOC that has five PAMU devices, the size
+		  is 0x5000.
+- interrupts	: <prop-encoded-array>
+		  Interrupt mappings.  The first tuple is the normal PAMU
+		  interrupt, used for reporting access violations.  The second
+		  is for PAMU hardware errors, such as PAMU operation errors
+		  and ECC errors.
+- #address-cells: <u32>
+		  A standard property.
+- #size-cells	: <u32>
+		  A standard property.
+
+Optional properties:
+- reg		: <prop-encoded-array>
+		  A standard property.   It represents the CCSR registers of
+		  all child PAMUs combined.  Include it to provide support
+		  for legacy drivers.
+- fsl,portid-mapping : <u32>
+		  The Coherency Subdomain ID Port Mapping Registers and
+		  Snoop ID Port Mapping registers, which are part of the
+		  CoreNet Coherency fabric (CCF), provide a CoreNet
+		  Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping
+		  functions.  Certain bits from these registers should be
+		  set if PAMUs should be snooped.  This property defines
+		  a bitmask which selects the bits that should be set if
+		  PAMUs should be snooped.
+
+Child nodes:
+
+Each child node represents one PAMU controller.  Each SOC device that is
+connected to a specific PAMU device should have a "fsl,pamu-phandle" property
+that links to the corresponding specific child PAMU controller.
+
+- reg		: <prop-encoded-array>
+		  A standard property.  Specifies the physical address and
+		  length (relative to the parent 'ranges' property) of this
+		  PAMU controller's configuration registers.  The size should
+		  be set to the size of this PAMU controllers's register space.
+		  For PAMU v1.0, this size is 0x1000.
+- fsl,primary-cache-geometry
+		: <prop-encoded-array>
+		  Two cells that specify the geometry of the primary PAMU
+		  cache.  The first is the number of cache lines, and the
+		  second is the number of "ways".  For direct-mapped caches,
+		  specify a value of 1.
+- fsl,secondary-cache-geometry
+		: <prop-encoded-array>
+		  Two cells that specify the geometry of the secondary PAMU
+		  cache.  The first is the number of cache lines, and the
+		  second is the number of "ways".  For direct-mapped caches,
+		  specify a value of 1.
+
+Device nodes:
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+		: <phandle>
+		Phandle to the single, specific PAMU controller node to which
+		this device is connect.  The PAMU topology is represented in
+		the device tree to assist code that dynamically determines the
+		best LIODN values to minimize PAMU cache thrashing.
+
+- fsl,liodn-reg : <prop-encoded-array>
+		  Two cells that specify the location of the LIODN register
+		  for this device.  Required for devices that have a single
+		  LIODN.  The first cell is a phandle to a node that contains
+		  the registers where the LIODN is to be set.  The second is
+		  the offset from the first "reg" resource of the node where
+		  the specific LIODN register is located.
+
+
+Example:
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>;
+		ranges = <0 0x20000 0x5000>;
+		fsl,portid-mapping = <0xf80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
new file mode 100644
index 0000000000..07256b7ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
@@ -0,0 +1,63 @@
+* Power Management Controller
+
+Properties:
+- compatible: "fsl,<chip>-pmc".
+
+  "fsl,mpc8349-pmc" should be listed for any chip whose PMC is
+  compatible.  "fsl,mpc8313-pmc" should also be listed for any chip
+  whose PMC is compatible, and implies deep-sleep capability.
+
+  "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
+  compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
+  whose PMC is compatible, and implies deep-sleep capability.
+
+  "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
+  compatible; all statements below that apply to "fsl,mpc8548-pmc" also
+  apply to "fsl,mpc8641d-pmc".
+
+  Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+  bit assignments are indicated via the sleep specifier in each device's
+  sleep property.
+
+- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
+  is the PMC block, and the second resource is the Clock Configuration
+  block.
+
+  For devices compatible with "fsl,mpc8548-pmc", the first resource
+  is a 32-byte block beginning with DEVDISR.
+
+- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
+  resource is the PMC block interrupt.
+
+- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
+  this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
+  a wakeup source from deep sleep.
+
+Sleep specifiers:
+
+  fsl,mpc8349-pmc: Sleep specifiers consist of one cell.  For each bit
+  that is set in the cell, the corresponding bit in SCCR will be saved
+  and cleared on suspend, and restored on resume.  This sleep controller
+  supports disabling and resuming devices at any time.
+
+  fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
+  which will be ORed into PMCDR upon suspend, and cleared from PMCDR
+  upon resume.  The first two cells are as described for fsl,mpc8578-pmc.
+  This sleep controller only supports disabling devices during system
+  sleep, or permanently.
+
+  fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
+  first of which will be ORed into DEVDISR (and the second into
+  DEVDISR2, if present -- this cell should be zero or absent if the
+  hardware does not have DEVDISR2) upon a request for permanent device
+  disabling.  This sleep controller does not support configuring devices
+  to disable during system sleep (unless supported by another compatible
+  match), or dynamically.
+
+Example:
+
+	power@b00 {
+		compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+		reg = <0xb00 0x100 0xa00 0x100>;
+		interrupts = <80 8>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
new file mode 100644
index 0000000000..ea902bc587
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators.  Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible:	Should contain "fsl,raideng-v1.0" as the value
+		This identifies RAID Engine block. 1 in 1.0 represents
+		major number whereas 0 represents minor number. The
+		version matches the hardware IP version.
+- reg:		offset and length of the register set for the device
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng: raideng@320000 {
+		compatible = "fsl,raideng-v1.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg	= <0x320000 0x10000>;
+		ranges	= <0 0x320000 0x10000>;
+	};
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible:	Should contain "fsl,raideng-v1.0-job-queue" as the value
+		This identifies the job queue interface
+- reg:		offset and length of the register set for job queue
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+	};
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible:	Must contain "fsl,raideng-v1.0-job-ring" as the value
+		This identifies job ring. Should contain either
+		"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+		depending upon whether ring has high or low priority
+- reg:		offset and length of the register set for job ring
+- interrupts:	interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn:	Specifies the LIODN to be used for Job Ring. This
+		property is normally set by firmware. Value
+		is of 12-bits which is the LIODN number for this JR.
+		This property is used by the IOMMU (PAMU) to distinguish
+		transactions from this JR and than be able to do address
+		translation & protection accordingly.
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg	   = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+			fsl,liodn = <0x41>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
new file mode 100644
index 0000000000..0532c46b33
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt
@@ -0,0 +1,18 @@
+Freescale Supplement configuration unit (SCFG)
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+
+- compatible: should be "fsl,<chip>-scfg"
+- reg: should contain base address and length of SCFG memory-mapped
+registers
+
+Example:
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1040-scfg";
+		reg = <0xfc000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
new file mode 100644
index 0000000000..0496ada4bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
@@ -0,0 +1,163 @@
+Message unit node:
+
+For SRIO controllers that implement the message unit as part of the controller
+this node is required.  For devices with RMAN this node should NOT exist.  The
+node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
+"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
+
+See srio.txt for more details about generic SRIO controller details.
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - fsl,liodn
+	Usage: optional-but-recommended (for devices with PAMU)
+	Value type: <prop-encoded-array>
+	Definition: The logical I/O device number for the PAMU (IOMMU) to be
+		correctly configured for SRIO accesses.  The property should
+		not exist on devices that do not support PAMU.
+
+		The LIODN value is associated with all RMU transactions
+		(msg-unit, doorbell, port-write).
+
+Sub-Nodes for RMU:  The RMU node is composed of multiple sub-nodes that
+correspond to the actual sub-controllers in the RMU.  The manual for a given
+SoC will detail which and how many of these sub-controllers are implemented.
+
+Message Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A pair of IRQs are specified in this property.  The first
+		element is associated with the transmit (TX) interrupt and the
+		second element is associated with the receive (RX) interrupt.
+
+Doorbell Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include:
+		"fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A pair of IRQs are specified in this property.  The first
+		element is associated with the transmit (TX) interrupt and the
+		second element is associated with the receive (RX) interrupt.
+
+Port-Write Unit:
+
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include:
+		 "fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
+
+	The version X.Y should match the general SRIO controller's IP Block
+	revision register's Major(X) and Minor (Y) value.
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers for message units
+		and doorbell units.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A single IRQ that handles port-write conditions is
+		specified by this property.  (Typically shared with error).
+
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
+
+Example:
+	rmu: rmu@d3000 {
+		compatible = "fsl,srio-rmu";
+		reg = <0xd3000 0x400>;
+		ranges = <0x0 0xd3000 0x400>;
+		fsl,liodn = <0xc8>;
+
+		message-unit@0 {
+			compatible = "fsl,srio-msg-unit";
+			reg = <0x0 0x100>;
+			interrupts = <
+				60 2 0 0  /* msg1_tx_irq */
+				61 2 0 0>;/* msg1_rx_irq */
+		};
+		message-unit@100 {
+			compatible = "fsl,srio-msg-unit";
+			reg = <0x100 0x100>;
+			interrupts = <
+				62 2 0 0  /* msg2_tx_irq */
+				63 2 0 0>;/* msg2_rx_irq */
+		};
+		doorbell-unit@400 {
+			compatible = "fsl,srio-dbell-unit";
+			reg = <0x400 0x80>;
+			interrupts = <
+				56 2 0 0  /* bell_outb_irq */
+				57 2 0 0>;/* bell_inb_irq */
+		};
+		port-write-unit@4e0 {
+			compatible = "fsl,srio-port-write-unit";
+			reg = <0x4e0 0x20>;
+			interrupts = <16 2 1 11>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
new file mode 100644
index 0000000000..86ee6ea737
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -0,0 +1,104 @@
+* Freescale Serial RapidIO (SRIO) Controller
+
+RapidIO port node:
+Properties:
+   - compatible
+	Usage: required
+	Value type: <string>
+	Definition: Must include "fsl,srio" for IP blocks with IP Block
+	Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
+
+	Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
+	version in IP Block Revision Register and Y is Minor version.  If this
+	compatible is provided it should be ordered before "fsl,srio".
+
+   - reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A standard property.  Specifies the physical address and
+		length of the SRIO configuration registers.  The size should
+		be set to 0x11000.
+
+   - interrupts
+	Usage: required
+	Value type: <prop_encoded-array>
+	Definition:  Specifies the interrupts generated by this device.  The
+		value of the interrupts property consists of one interrupt
+		specifier. The format of the specifier is defined by the
+		binding document describing the node's interrupt parent.
+
+		A single IRQ that handles error conditions is specified by this
+		property.  (Typically shared with port-write).
+
+   - fsl,srio-rmu-handle:
+	Usage: required if rmu node is defined
+	Value type: <phandle>
+	Definition: A single <phandle> value that points to the RMU.
+	(See srio-rmu.txt for more details on RMU node binding)
+
+Port Child Nodes:  There should a port child node for each port that exists in
+the controller.  The ports are numbered starting at one (1) and should have
+the following properties:
+
+   - cell-index
+	Usage: required
+	Value type: <u32>
+	Definition: A standard property.  Matches the port id.
+
+   - ranges
+	Usage: required if local access windows preset
+	Value type: <prop-encoded-array>
+	Definition: A standard property. Utilized to describe the memory mapped
+		IO space utilized by the controller.  This corresponds to the
+		setting of the local access windows that are targeted to this
+		SRIO port.
+
+   - fsl,liodn
+	Usage: optional-but-recommended (for devices with PAMU)
+	Value type: <prop-encoded-array>
+	Definition: The logical I/O device number for the PAMU (IOMMU) to be
+		correctly configured for SRIO accesses.  The property should
+		not exist on devices that do not support PAMU.
+
+		For HW (ie, the P4080) that only supports a LIODN for both
+		memory and maintenance transactions then a single LIODN is
+		represented in the property for both transactions.
+
+		For HW (ie, the P304x/P5020, etc) that supports an LIODN for
+		memory transactions and a unique LIODN for maintenance
+		transactions then a pair of LIODNs are represented in the
+		property.  Within the pair, the first element represents the
+		LIODN associated with memory transactions and the second element
+		represents the LIODN associated with maintenance transactions
+		for the port.
+
+Note: All other standard properties (see the Devicetree Specification)
+are allowed but are optional.
+
+Example:
+
+	rapidio: rapidio@ffe0c0000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+		compatible = "fsl,srio";
+		interrupts = <16 2 1 11>; /* err_irq */
+		fsl,srio-rmu-handle = <&rmu>;
+		ranges;
+
+		port1 {
+			cell-index = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			fsl,liodn = <34>;
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+
+		port2 {
+			cell-index = <2>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			fsl,liodn = <48>;
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt
new file mode 100644
index 0000000000..5af426e133
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/ibm,powerpc-cpu-features.txt
@@ -0,0 +1,248 @@
+*** NOTE ***
+This document is copied from OPAL firmware
+(skiboot/doc/device-tree/ibm,powerpc-cpu-features/binding.txt)
+
+There is more complete overview and documentation of features in that
+source tree.  All patches and modifications should go there.
+************
+
+ibm,powerpc-cpu-features binding
+================================
+
+This device tree binding describes CPU features available to software, with
+enablement, privilege, and compatibility metadata.
+
+More general description of design and implementation of this binding is
+found in design.txt, which also points to documentation of specific features.
+
+
+/cpus/ibm,powerpc-cpu-features node binding
+-------------------------------------------
+
+Node: ibm,powerpc-cpu-features
+
+Description: Container of CPU feature nodes.
+
+The node name must be "ibm,powerpc-cpu-features".
+
+It is implemented as a child of the node "/cpus", but this must not be
+assumed by parsers.
+
+The node is optional but should be provided by new OPAL firmware.
+
+Properties:
+
+- compatible
+  Usage: required
+  Value type: string
+  Definition: "ibm,powerpc-cpu-features"
+
+  This compatibility refers to backwards compatibility of the overall
+  design with parsers that behave according to these guidelines. This can
+  be extended in a backward compatible manner which would not warrant a
+  revision of the compatible property.
+
+- isa
+  Usage: required
+  Value type: <u32>
+  Definition:
+
+  isa that the CPU is currently running in. This provides instruction set
+  compatibility, less the individual feature nodes. For example, an ISA v3.0
+  implementation that lacks the "transactional-memory" cpufeature node
+  should not use transactional memory facilities.
+
+  Value corresponds to the "Power ISA Version" multiplied by 1000.
+  For example, <3000> corresponds to Version 3.0, <2070> to Version 2.07.
+  The minor digit is available for revisions.
+
+- display-name
+  Usage: optional
+  Value type: string
+  Definition:
+
+  A human readable name for the CPU.
+
+/cpus/ibm,powerpc-cpu-features/example-feature node bindings
+----------------------------------------------------------------
+
+Each child node of cpu-features represents a CPU feature / capability.
+
+Node: A string describing an architected CPU feature, e.g., "floating-point".
+
+Description: A feature or capability supported by the CPUs.
+
+The name of the node is a human readable string that forms the interface
+used to describe features to software. Features are currently documented
+in the code where they are implemented in skiboot/core/cpufeatures.c
+
+Presence of the node indicates the feature is available.
+
+Properties:
+
+- isa
+  Usage: required
+  Value type: <u32>
+  Definition:
+
+  First level of the Power ISA that the feature appears in.
+  Software should filter out features when constraining the
+  environment to a particular ISA version.
+
+  Value is defined similarly to /cpus/features/isa
+
+- usable-privilege
+  Usage: required
+  Value type: <u32> bit mask
+  Definition:
+              Bit numbers are LSB0
+              bit 0 - PR (problem state / user mode)
+              bit 1 - OS (privileged state)
+              bit 2 - HV (hypervisor state)
+              All other bits reserved and should be zero.
+
+  This property describes the privilege levels and/or software components
+  that can use the feature.
+
+  If bit 0 is set, then the hwcap-bit-nr property will exist.
+
+
+- hv-support
+  Usage: optional
+  Value type: <u32> bit mask
+  Definition:
+              Bit numbers are LSB0
+              bit 0 -  HFSCR
+              All other bits reserved and should be zero.
+
+  This property describes the HV privilege support required to enable the
+  feature to lesser privilege levels. If the property does not exist then no
+  support is required.
+
+  If no bits are set, the hypervisor must have explicit/custom support for
+  this feature.
+
+  If the HFSCR bit is set, then the hfscr-bit-nr property will exist and
+  the feature may be enabled by setting this bit in the HFSCR register.
+
+
+- os-support
+  Usage: optional
+  Value type: <u32> bit mask
+  Definition:
+              Bit numbers are LSB0
+              bit 0 -  FSCR
+              All other bits reserved and should be zero.
+
+  This property describes the OS privilege support required to enable the
+  feature to lesser privilege levels. If the property does not exist then no
+  support is required.
+
+  If no bits are set, the operating system must have explicit/custom support
+  for this feature.
+
+  If the FSCR bit is set, then the fscr-bit-nr property will exist and
+  the feature may be enabled by setting this bit in the FSCR register.
+
+
+- hfscr-bit-nr
+  Usage: optional
+  Value type: <u32>
+  Definition: HFSCR bit position (LSB0)
+
+  This property exists when the hv-support property HFSCR bit is set. This
+  property describes the bit number in the HFSCR register that the
+  hypervisor must set in order to enable this feature.
+
+  This property also exists if an HFSCR bit corresponds with this feature.
+  This makes CPU feature parsing slightly simpler.
+
+
+- fscr-bit-nr
+  Usage: optional
+  Value type: <u32>
+  Definition: FSCR bit position (LSB0)
+
+  This property exists when the os-support property FSCR bit is set. This
+  property describes the bit number in the FSCR register that the
+  operating system must set in order to enable this feature.
+
+  This property also exists if an FSCR bit corresponds with this feature.
+  This makes CPU feature parsing slightly simpler.
+
+
+- hwcap-bit-nr
+  Usage: optional
+  Value type: <u32>
+  Definition: Linux ELF AUX vector bit position (LSB0)
+
+  This property may exist when the usable-privilege property value has PR bit set.
+  This property describes the bit number that should be set in the ELF AUX
+  hardware capability vectors in order to advertise this feature to userspace.
+  Bits 0-31 correspond to bits 0-31 in AT_HWCAP vector. Bits 32-63 correspond
+  to 0-31 in AT_HWCAP2 vector, and so on.  Missing AT_HWCAPx vectors implies
+  that the feature is not enabled or can not be advertised. Operating systems
+  may provide a number of unassigned hardware capability bits to allow for new
+  features to be advertised.
+
+  Some properties representing features created before this binding are
+  advertised to userspace without a one-to-one hwcap bit number may not specify
+  this bit. Operating system will handle those bits specifically.  All new
+  features usable by userspace will have a hwcap-bit-nr property.
+
+
+- dependencies
+  Usage: optional
+  Value type: <prop-encoded-array>
+  Definition:
+
+  If this property exists then it is a list of phandles to cpu feature
+  nodes that must be enabled for this feature to be enabled.
+
+
+Example
+-------
+
+	/cpus/ibm,powerpc-cpu-features {
+		compatible = "ibm,powerpc-cpu-features";
+
+		isa = <3020>;
+
+		darn {
+			isa = <3000>;
+			usable-privilege = <1 | 2 | 4>;
+			hwcap-bit-nr = <xx>;
+		};
+
+		scv {
+			isa = <3000>;
+			usable-privilege = <1 | 2>;
+			os-support = <0>;
+			hwcap-bit-nr = <xx>;
+		};
+
+		stop {
+			isa = <3000>;
+			usable-privilege = <2 | 4>;
+			hv-support = <0>;
+			os-support = <0>;
+		};
+
+		vsx2 (hypothetical) {
+			isa = <3010>;
+			usable-privilege = <1 | 2 | 4>;
+			hv-support = <0>;
+			os-support = <0>;
+			hwcap-bit-nr = <xx>;
+		};
+
+		vsx2-newinsns {
+			isa = <3020>;
+			usable-privilege = <1 | 2 | 4>;
+			os-support = <1>;
+			fscr-bit-nr = <xx>;
+			hwcap-bit-nr = <xx>;
+			dependencies = <&vsx2>;
+		};
+
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/ibm,vas.txt b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt
new file mode 100644
index 0000000000..bf11d2faf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/ibm,vas.txt
@@ -0,0 +1,22 @@
+* IBM Powerpc Virtual Accelerator Switchboard (VAS)
+
+VAS is a hardware mechanism that allows kernel subsystems and user processes
+to directly submit compression and other requests to Nest accelerators (NX)
+or other coprocessors functions.
+
+Required properties:
+- compatible : should be "ibm,vas".
+- ibm,vas-id : A unique identifier for each instance of VAS in the system
+- reg : Should contain 4 pairs of 64-bit fields specifying the Hypervisor
+  window context start and length, OS/User window context start and length,
+  "Paste address" start and length, "Paste window id" start bit and number
+  of bits)
+
+Example:
+
+	vas@6019100000000 {
+		compatible = "ibm,vas", "ibm,power9-vas";
+		reg = <0x6019100000000 0x2000000 0x6019000000000 0x100000000 0x8000000000000 0x100000000 0x20 0x10>;
+		name = "vas";
+		ibm,vas-id = <0x1>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt
new file mode 100644
index 0000000000..3826bd1219
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/gamecube.txt
@@ -0,0 +1,109 @@
+
+Nintendo GameCube device tree
+=============================
+
+1) The "flipper" node
+
+  This node represents the multi-function "Flipper" chip, which packages
+  many of the devices found in the Nintendo GameCube.
+
+  Required properties:
+
+   - compatible : Should be "nintendo,flipper"
+
+1.a) The Video Interface (VI) node
+
+  Represents the interface between the graphics processor and a external
+  video encoder.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-vi"
+   - reg : should contain the VI registers location and length
+   - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+  Represents the data and control interface between the main processor
+  and graphics and audio processor.
+
+  Required properties:
+
+  - compatible : should be "nintendo,flipper-pi"
+  - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+  Represents the interrupt controller within the "Flipper" chip.
+  The node for the "Flipper" interrupt controller must be placed under
+  the PI node.
+
+  Required properties:
+
+  - compatible : should be "nintendo,flipper-pic"
+
+1.c) The Digital Signal Processor (DSP) node
+
+  Represents the digital signal processor interface, designed to offload
+  audio related tasks.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-dsp"
+   - reg : should contain the DSP registers location and length
+   - interrupts : should contain the DSP interrupt
+
+1.c.i) The Auxiliary RAM (ARAM) node
+
+  Represents the non cpu-addressable ram designed mainly to store audio
+  related information.
+  The ARAM node must be placed under the DSP node.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-aram"
+   - reg : should contain the ARAM start (zero-based) and length
+
+1.d) The Disk Interface (DI) node
+
+  Represents the interface used to communicate with mass storage devices.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-di"
+   - reg : should contain the DI registers location and length
+   - interrupts : should contain the DI interrupt
+
+1.e) The Audio Interface (AI) node
+
+  Represents the interface to the external 16-bit stereo digital-to-analog
+  converter.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-ai"
+   - reg : should contain the AI registers location and length
+   - interrupts : should contain the AI interrupt
+
+1.f) The Serial Interface (SI) node
+
+  Represents the interface to the four single bit serial interfaces.
+  The SI is a proprietary serial interface used normally to control gamepads.
+  It's NOT a RS232-type interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-si"
+   - reg : should contain the SI registers location and length
+   - interrupts : should contain the SI interrupt
+
+1.g) The External Interface (EXI) node
+
+  Represents the multi-channel SPI-like interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-exi"
+   - reg : should contain the EXI registers location and length
+   - interrupts : should contain the EXI interrupt
+
diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
new file mode 100644
index 0000000000..6f69a9dfe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt
@@ -0,0 +1,166 @@
+
+Nintendo Wii device tree
+========================
+
+0) The root node
+
+  This node represents the Nintendo Wii video game console.
+
+  Required properties:
+
+   - model : Should be "nintendo,wii"
+   - compatible : Should be "nintendo,wii"
+
+1) The "hollywood" node
+
+  This node represents the multi-function "Hollywood" chip, which packages
+  many of the devices found in the Nintendo Wii.
+
+  Required properties:
+
+   - compatible : Should be "nintendo,hollywood"
+
+1.a) The Video Interface (VI) node
+
+  Represents the interface between the graphics processor and a external
+  video encoder.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
+   - reg : should contain the VI registers location and length
+   - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+  Represents the data and control interface between the main processor
+  and graphics and audio processor.
+
+  Required properties:
+
+  - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
+  - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+  Represents the "Flipper" interrupt controller within the "Hollywood" chip.
+  The node for the "Flipper" interrupt controller must be placed under
+  the PI node.
+
+  Required properties:
+
+  - #interrupt-cells : <1>
+  - compatible : should be "nintendo,flipper-pic"
+  - interrupt-controller
+
+1.c) The Digital Signal Processor (DSP) node
+
+  Represents the digital signal processor interface, designed to offload
+  audio related tasks.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
+   - reg : should contain the DSP registers location and length
+   - interrupts : should contain the DSP interrupt
+
+1.d) The Serial Interface (SI) node
+
+  Represents the interface to the four single bit serial interfaces.
+  The SI is a proprietary serial interface used normally to control gamepads.
+  It's NOT a RS232-type interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
+   - reg : should contain the SI registers location and length
+   - interrupts : should contain the SI interrupt
+
+1.e) The Audio Interface (AI) node
+
+  Represents the interface to the external 16-bit stereo digital-to-analog
+  converter.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
+   - reg : should contain the AI registers location and length
+   - interrupts : should contain the AI interrupt
+
+1.f) The External Interface (EXI) node
+
+  Represents the multi-channel SPI-like interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
+   - reg : should contain the EXI registers location and length
+   - interrupts : should contain the EXI interrupt
+
+1.h) The Enhanced Host Controller Interface (EHCI) node
+
+  Represents the USB 2.0 Enhanced Host Controller Interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
+   - reg : should contain the EHCI registers location and length
+   - interrupts : should contain the EHCI interrupt
+
+1.i) The Secure Digital Host Controller Interface (SDHCI) nodes
+
+  Represent the Secure Digital Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-sdhci","sdhci"
+   - reg : should contain the SDHCI registers location and length
+   - interrupts : should contain the SDHCI interrupt
+
+1.j) The Inter-Processor Communication (IPC) node
+
+  Represent the Inter-Processor Communication interface. This interface
+  enables communications between the Broadway and the Starlet processors.
+
+   - compatible : should be "nintendo,hollywood-ipc"
+   - reg : should contain the IPC registers location and length
+   - interrupts : should contain the IPC interrupt
+
+1.k) The "Hollywood" interrupt controller node
+
+  Represents the "Hollywood" interrupt controller within the
+  "Hollywood" chip.
+
+  Required properties:
+
+  - #interrupt-cells : <1>
+  - compatible : should be "nintendo,hollywood-pic"
+  - reg : should contain the controller registers location and length
+  - interrupt-controller
+  - interrupts : should contain the cascade interrupt of the "flipper" pic
+
+1.l) The General Purpose I/O (GPIO) controller node
+
+  see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+
+1.m) The control node
+
+  Represents the control interface used to setup several miscellaneous
+  settings of the "Hollywood" chip like boot memory mappings, resets,
+  disk interface mode, etc.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-control"
+   - reg : should contain the control registers location and length
+
+1.n) The Disk Interface (DI) node
+
+  Represents the interface used to communicate with mass storage devices.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-di"
+   - reg : should contain the DI registers location and length
+   - interrupts : should contain the DI interrupt
+
diff --git a/Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt b/Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt
new file mode 100644
index 0000000000..dffb79108b
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/oppanel-opal.txt
@@ -0,0 +1,14 @@
+IBM OPAL Operator Panel Binding
+-------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-oppanel".
+- #lines     : Number of lines on the operator panel e.g. <0x2>.
+- #length    : Number of characters per line of the operator panel e.g. <0x10>.
+
+Example:
+	oppanel {
+		compatible = "ibm,opal-oppanel";
+		#lines = <0x2>;
+		#length = <0x10>;
+	};
diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
new file mode 100644
index 0000000000..d6658d3dd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
@@ -0,0 +1,118 @@
+IBM Power-Management Bindings
+=============================
+
+Linux running on baremetal POWER machines has access to the processor
+idle states. The description of these idle states is exposed via the
+node @power-mgt in the device-tree by the firmware.
+
+Definitions:
+----------------
+Typically each idle state has the following associated properties:
+
+- name: The name of the idle state as defined by the firmware.
+
+- flags: indicating some aspects of this idle states such as the
+         extent of state-loss, whether timebase is stopped on this
+         idle states and so on. The flag bits are as follows:
+
+- exit-latency: The latency involved in transitioning the state of the
+		CPU from idle to running.
+
+- target-residency: The minimum time that the CPU needs to reside in
+		    this idle state in order to accrue power-savings
+		    benefit.
+
+Properties
+----------------
+The following properties provide details about the idle states. These
+properties are exposed as arrays. Each entry in the property array
+provides the value of that property for the idle state associated with
+the array index of that entry.
+
+If idle-states are defined, then the properties
+"ibm,cpu-idle-state-names" and "ibm,cpu-idle-state-flags" are
+required. The other properties are required unless mentioned
+otherwise. The length of all the property arrays must be the same.
+
+- ibm,cpu-idle-state-names:
+	Array of strings containing the names of the idle states.
+
+- ibm,cpu-idle-state-flags:
+	Array of unsigned 32-bit values containing the values of the
+	flags associated with the aforementioned idle-states. The
+	flag bits are as follows:
+		0x00000001 /* Decrementer would stop */
+		0x00000002 /* Needs timebase restore */
+		0x00001000 /* Restore GPRs like nap */
+		0x00002000 /* Restore hypervisor resource from PACA pointer */
+		0x00004000 /* Program PORE to restore PACA pointer */
+		0x00010000 /* This is a nap state (POWER7,POWER8) */
+		0x00020000 /* This is a fast-sleep state (POWER8)*/
+		0x00040000 /* This is a winkle state (POWER8) */
+		0x00080000 /* This is a fast-sleep state which requires a */
+			   /* software workaround for restoring the */
+			   /* timebase (POWER8) */
+		0x00800000 /* This state uses SPR PMICR instruction */
+			   /* (POWER8)*/
+		0x00100000 /* This is a fast stop state (POWER9) */
+		0x00200000 /* This is a deep-stop state (POWER9) */
+
+- ibm,cpu-idle-state-latencies-ns:
+	Array of unsigned 32-bit values containing the values of the
+	exit-latencies (in ns) for the idle states in
+	ibm,cpu-idle-state-names.
+
+- ibm,cpu-idle-state-residency-ns:
+	Array of unsigned 32-bit values containing the values of the
+	target-residency (in ns) for the idle states in
+	ibm,cpu-idle-state-names. On POWER8 this is an optional
+	property. If the property is absent, the target residency for
+	the "Nap", "FastSleep" are defined to 10000 and 300000000
+	respectively by the kernel. On POWER9 this property is required.
+
+- ibm,cpu-idle-state-psscr:
+	Array of unsigned 64-bit values containing the values for the
+	PSSCR for each of the idle states in ibm,cpu-idle-state-names.
+	This property is required on POWER9 and absent on POWER8.
+
+- ibm,cpu-idle-state-psscr-mask:
+	Array of unsigned 64-bit values containing the masks
+	indicating which psscr fields are set in the corresponding
+	entries of ibm,cpu-idle-state-psscr. This property is
+	required on POWER9 and absent on POWER8.
+
+	Whenever the firmware sets an entry in
+	ibm,cpu-idle-state-psscr-mask value to 0xf, it implies that
+	only the Requested Level (RL) field of the corresponding entry
+	in ibm,cpu-idle-state-psscr should be considered by the
+	kernel. For such idle states, the kernel would set the
+	remaining fields of the psscr to the following sane-default
+	values.
+
+		- ESL and EC bits are to 1. So wakeup from any stop
+		  state will be at vector 0x100.
+
+		- MTL and PSLL are set to the maximum allowed value as
+		  per the ISA, i.e. 15.
+
+		- The Transition Rate, TR is set to the Maximum value
+                  3.
+
+	For all the other values of the entry in
+	ibm,cpu-idle-state-psscr-mask, the kernel expects all the
+	psscr fields of the corresponding entry in
+	ibm,cpu-idle-state-psscr to be correctly set by the firmware.
+
+- ibm,cpu-idle-state-pmicr:
+	Array of unsigned 64-bit values containing the pmicr values
+	for the idle states in ibm,cpu-idle-state-names. This 64-bit
+	register value is to be set in pmicr for the corresponding
+	state if the flag indicates that pmicr SPR should be set. This
+	is an optional property on POWER8 and is absent on
+	POWER9.
+
+- ibm,cpu-idle-state-pmicr-mask:
+	Array of unsigned 64-bit values containing the mask indicating
+	which of the fields of the PMICR are set in the corresponding
+	entries in ibm,cpu-idle-state-pmicr. This is an optional
+	property on POWER8 and is absent on POWER9.
diff --git a/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
new file mode 100644
index 0000000000..6ad881cbff
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
@@ -0,0 +1,27 @@
+IBM OPAL Sensor Groups Binding
+-------------------------------
+
+Node: /ibm,opal/sensor-groups
+
+Description: Contains sensor groups available in the Powernv P9
+servers. Each child node indicates a sensor group.
+
+- compatible : Should be "ibm,opal-sensor-group"
+
+Each child node contains below properties:
+
+- type : String to indicate the type of sensor-group
+
+- sensor-group-id: Abstract unique identifier provided by firmware of
+		   type <u32> which is used for sensor-group
+		   operations like clearing the min/max history of all
+		   sensors belonging to the group.
+
+- ibm,chip-id : Chip ID
+
+- sensors : Phandle array of child nodes of /ibm,opal/sensor/
+	    belonging to this group
+
+- ops : Array of opal-call numbers indicating available operations on
+	sensor groups like clearing min/max, enabling/disabling sensor
+	group.
diff --git a/Documentation/devicetree/bindings/powerpc/sleep.yaml b/Documentation/devicetree/bindings/powerpc/sleep.yaml
new file mode 100644
index 0000000000..1b0936a5be
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/sleep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/powerpc/sleep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerPC sleep property
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Devices on SOCs often have mechanisms for placing devices into low-power
+  states that are decoupled from the devices' own register blocks.  Sometimes,
+  this information is more complicated than a cell-index property can
+  reasonably describe.  Thus, each device controlled in such a manner
+  may contain a "sleep" property which describes these connections.
+
+  The sleep property consists of one or more sleep resources, each of
+  which consists of a phandle to a sleep controller, followed by a
+  controller-specific sleep specifier of zero or more cells.
+
+  The semantics of what type of low power modes are possible are defined
+  by the sleep controller.  Some examples of the types of low power modes
+  that may be supported are:
+
+   - Dynamic: The device may be disabled or enabled at any time.
+   - System Suspend: The device may request to be disabled or remain
+     awake during system suspend, but will not be disabled until then.
+   - Permanent: The device is disabled permanently (until the next hard
+     reset).
+
+  Some devices may share a clock domain with each other, such that they should
+  only be suspended when none of the devices are in use.  Where reasonable,
+  such nodes should be placed on a virtual bus, where the bus has the sleep
+  property.  If the clock domain is shared among devices that cannot be
+  reasonably grouped in this manner, then create a virtual sleep controller
+  (similar to an interrupt nexus, except that defining a standardized
+  sleep-map should wait until its necessity is demonstrated).
+
+select: true
+
+properties:
+  sleep:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.yaml b/Documentation/devicetree/bindings/pps/pps-gpio.yaml
new file mode 100644
index 0000000000..fd4adfa8d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pps/pps-gpio.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pps/pps-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PPS Signal via GPIO
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+properties:
+  compatible:
+    const: pps-gpio
+
+  gpios:
+    description: The GPIO that provides the PPS signal.
+    maxItems: 1
+
+  echo-gpios:
+    description: The GPIO that provides the PPS ECHO signal.
+    maxItems: 1
+
+  echo-active-ms:
+    description: Duration in ms of the active portion of the echo pulse.
+
+  assert-falling-edge:
+    description: Indicates a falling edge assert, when present. Rising edge if absent.
+    type: boolean
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      pps {
+          compatible = "pps-gpio";
+          pinctrl-names = "default";
+          pinctrl-0 = <&pinctrl_pps>;
+          gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+          assert-falling-edge;
+          echo-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+          echo-active-ms = <100>;
+      };
diff --git a/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
new file mode 100644
index 0000000000..6b1075ee8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt
@@ -0,0 +1,19 @@
+* Broadcom Digital Timing Engine(DTE) based PTP clock
+
+Required properties:
+- compatible: should contain the core compatibility string
+              and the SoC compatibility string. The SoC
+              compatibility string is to handle SoC specific
+              hardware differences.
+              Core compatibility string:
+                 "brcm,ptp-dte"
+              SoC compatibility strings:
+                 "brcm,iproc-ptp-dte" - for iproc based SoC's
+- reg: address and length of the DTE block's NCO registers
+
+Example:
+
+ptp: ptp-dte@180af650 {
+	compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
+	reg = <0x180af650 0x10>;
+};
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
new file mode 100644
index 0000000000..51381e4cbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idt82p33.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT 82P33 PTP Clock
+
+description: |
+  IDT 82P33XXX Synchronization Management Unit (SMU) based PTP clock
+
+maintainers:
+  - Min Li <min.li.xe@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - idt,82p33810
+      - idt,82p33813
+      - idt,82p33814
+      - idt,82p33831
+      - idt,82p33910
+      - idt,82p33913
+      - idt,82p33914
+      - idt,82p33931
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@51 {
+            compatible = "idt,82p33810";
+            reg = <0x51>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
new file mode 100644
index 0000000000..7cf32663c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-idtcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IDT ClockMatrix (TM) PTP Clock
+
+maintainers:
+  - Vincent Cheng <vincent.cheng.xh@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      # For System Synchronizer
+      - idt,8a34000
+      - idt,8a34001
+      - idt,8a34002
+      - idt,8a34003
+      - idt,8a34004
+      - idt,8a34005
+      - idt,8a34006
+      - idt,8a34007
+      - idt,8a34008
+      - idt,8a34009
+      # For Port Synchronizer
+      - idt,8a34010
+      - idt,8a34011
+      - idt,8a34012
+      - idt,8a34013
+      - idt,8a34014
+      - idt,8a34015
+      - idt,8a34016
+      - idt,8a34017
+      - idt,8a34018
+      - idt,8a34019
+      # For Universal Frequency Translator (UFT)
+      - idt,8a34040
+      - idt,8a34041
+      - idt,8a34042
+      - idt,8a34043
+      - idt,8a34044
+      - idt,8a34045
+      - idt,8a34046
+      - idt,8a34047
+      - idt,8a34048
+      - idt,8a34049
+
+  reg:
+    maxItems: 1
+    description:
+      I2C slave address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phc@5b {
+            compatible = "idt,8a34000";
+            reg = <0x5b>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ptp/ptp-ines.txt b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
new file mode 100644
index 0000000000..4c242bd1ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-ines.txt
@@ -0,0 +1,35 @@
+ZHAW InES PTP time stamping IP core
+
+The IP core needs two different kinds of nodes.  The control node
+lives somewhere in the memory map and specifies the address of the
+control registers.  There can be up to three port handles placed as
+attributes of PHY nodes.  These associate a particular MII bus with a
+port index within the IP core.
+
+Required properties of the control node:
+
+- compatible:		"ines,ptp-ctrl"
+- reg:			physical address and size of the register bank
+
+Required format of the port handle within the PHY node:
+
+- timestamper:		provides control node reference and
+			the port channel within the IP core
+
+Example:
+
+	tstamper: timestamper@60000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x60000000 0x80>;
+	};
+
+	ethernet@80000000 {
+		...
+		mdio {
+			...
+			ethernet-phy@3 {
+				...
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
new file mode 100644
index 0000000000..743eda754e
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
@@ -0,0 +1,87 @@
+* Freescale QorIQ 1588 timer based PTP clock
+
+General Properties:
+
+  - compatible   Should be "fsl,etsec-ptp" for eTSEC
+                 Should be "fsl,fman-ptp-timer" for DPAA FMan
+                 Should be "fsl,dpaa2-ptp" for DPAA2
+                 Should be "fsl,enetc-ptp" for ENETC
+  - reg          Offset and length of the register set for the device
+  - interrupts   There should be at least two interrupts. Some devices
+                 have as many as four PTP related interrupts.
+
+Clock Properties:
+
+  - fsl,cksel        Timer reference clock source.
+  - fsl,tclk-period  Timer reference clock period in nanoseconds.
+  - fsl,tmr-prsc     Prescaler, divides the output clock.
+  - fsl,tmr-add      Frequency compensation value.
+  - fsl,tmr-fiper1   Fixed interval period pulse generator.
+  - fsl,tmr-fiper2   Fixed interval period pulse generator.
+  - fsl,tmr-fiper3   Fixed interval period pulse generator.
+                     Supported only on DPAA2 and ENETC hardware.
+  - fsl,max-adj      Maximum frequency adjustment in parts per billion.
+  - fsl,extts-fifo   The presence of this property indicates hardware
+		     support for the external trigger stamp FIFO.
+  - little-endian    The presence of this property indicates the 1588 timer
+		     IP block is little-endian mode. The default endian mode
+		     is big-endian.
+
+  These properties set the operational parameters for the PTP
+  clock. You must choose these carefully for the clock to work right.
+  Here is how to figure good values:
+
+  TimerOsc     = selected reference clock   MHz
+  tclk_period  = desired clock period       nanoseconds
+  NominalFreq  = 1000 / tclk_period         MHz
+  FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
+  tmr_add      = ceil(2^32 / FreqDivRatio)
+  OutputClock  = NominalFreq / tmr_prsc     MHz
+  PulseWidth   = 1 / OutputClock            microseconds
+  FiperFreq1   = desired frequency in Hz
+  FiperDiv1    = 1000000 * OutputClock / FiperFreq1
+  tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+  max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+  The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+  driver expects that tmr_fiper1 will be correctly set to produce a 1
+  Pulse Per Second (PPS) signal, since this will be offered to the PPS
+  subsystem to synchronize the Linux clock.
+
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  For eTSEC,
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  For DPAA FMan,
+  <0> - external high precision timer reference clock (TMR_1588_CLK)
+  <1> - MAC system clock (1/2 FMan clock)
+  <2> - reserved
+  <3> - RTC clock oscillator
+
+  When this attribute is not used, the IEEE 1588 timer reference clock
+  will use the eTSEC system clock (for Gianfar) or the MAC system
+  clock (for DPAA).
+
+Example:
+
+	ptp_clock@24e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0x24E00 0xB0>;
+		interrupts = <12 0x8 13 0x8>;
+		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
+		fsl,tclk-period = <10>;
+		fsl,tmr-prsc    = <100>;
+		fsl,tmr-add     = <0x999999A4>;
+		fsl,tmr-fiper1  = <0x3B9AC9F6>;
+		fsl,tmr-fiper2  = <0x00018696>;
+		fsl,max-adj     = <659999998>;
+	};
diff --git a/Documentation/devicetree/bindings/ptp/timestamper.txt b/Documentation/devicetree/bindings/ptp/timestamper.txt
new file mode 100644
index 0000000000..fc550ce4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/timestamper.txt
@@ -0,0 +1,42 @@
+Time stamps from MII bus snooping devices
+
+This binding supports non-PHY devices that snoop the MII bus and
+provide time stamps.  In contrast to PHY time stamping drivers (which
+can simply attach their interface directly to the PHY instance), stand
+alone MII time stamping drivers use this binding to specify the
+connection between the snooping device and a given network interface.
+
+Non-PHY MII time stamping drivers typically talk to the control
+interface over another bus like I2C, SPI, UART, or via a memory mapped
+peripheral.  This controller device is associated with one or more
+time stamping channels, each of which snoops on a MII bus.
+
+The "timestamper" property lives in a phy node and links a time
+stamping channel from the controller device to that phy's MII bus.
+
+Example:
+
+	tstamper: timestamper@10000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x10000000 0x80>;
+	};
+
+	ethernet@20000000 {
+		mdio {
+			ethernet-phy@1 {
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
+
+	ethernet@30000000 {
+		mdio {
+			ethernet-phy@2 {
+				timestamper = <&tstamper 1>;
+			};
+		};
+	};
+
+In this example, time stamps from the MII bus attached to phy@1 will
+appear on time stamp channel 0 (zero), and those from phy@2 appear on
+channel 1.
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
new file mode 100644
index 0000000000..66e400f2a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 PWM
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#pwm-cells":
+    const: 3
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-pwm
+      - const: allwinner,sun5i-a10s-pwm
+      - const: allwinner,sun5i-a13-pwm
+      - const: allwinner,sun7i-a20-pwm
+      - const: allwinner,sun8i-h3-pwm
+      - items:
+          - const: allwinner,sun8i-a83t-pwm
+          - const: allwinner,sun8i-h3-pwm
+      - items:
+          - enum:
+              - allwinner,suniv-f1c100s-pwm
+              - allwinner,sun8i-v3s-pwm
+          - const: allwinner,sun7i-a20-pwm
+      - items:
+          - const: allwinner,sun50i-a64-pwm
+          - const: allwinner,sun5i-a13-pwm
+      - items:
+          - const: allwinner,sun50i-h5-pwm
+          - const: allwinner,sun5i-a13-pwm
+      - const: allwinner,sun50i-h6-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-pwm
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: mod
+            - const: bus
+
+      required:
+        - clock-names
+        - resets
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@1c20e00 {
+        compatible = "allwinner,sun7i-a20-pwm";
+        reg = <0x01c20e00 0xc>;
+        clocks = <&osc24M>;
+        #pwm-cells = <3>;
+    };
+
+  - |
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    pwm@300a000 {
+      compatible = "allwinner,sun50i-h6-pwm";
+      reg = <0x0300a000 0x400>;
+      clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+      clock-names = "mod", "bus";
+      resets = <&ccu RST_BUS_PWM>;
+      #pwm-cells = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
new file mode 100644
index 0000000000..142157bff0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/apple,s5l-fpwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple FPWM controller
+
+maintainers:
+  - asahi@lists.linux.dev
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description: PWM controller used for keyboard backlight on ARM Macs
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-fpwm
+          - apple,t6000-fpwm
+          - apple,t8112-fpwm
+      - const: apple,s5l-fpwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@235044000 {
+      compatible = "apple,t8103-fpwm", "apple,s5l-fpwm";
+      reg = <0x35044000 0x4000>;
+      power-domains = <&ps_fpwm1>;
+      clocks = <&clkref>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
new file mode 100644
index 0000000000..d84268b597
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel,at91sam-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip PWM controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9rl-pwm
+              - atmel,sama5d3-pwm
+              - atmel,sama5d2-pwm
+              - microchip,sam9x60-pwm
+      - items:
+          - const: microchip,sama7g5-pwm
+          - const: atmel,sama5d2-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwm0: pwm@f8034000 {
+        compatible = "atmel,at91sam9rl-pwm";
+        reg = <0xf8034000 0x400>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
new file mode 100644
index 0000000000..afa501bf7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
+
+The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
+See ../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be one of the following:
+   "atmel,hlcdc-pwm"
+ - pinctr-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the pinctrl states described by pinctrl
+   default.
+ - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
+   bindings defined in pwm.yaml in this directory.
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
new file mode 100644
index 0000000000..119de3d7f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@f0408000 {
+       compatible = "brcm,bcm7038-pwm";
+       reg = <0xf0408000 0x28>;
+       #pwm-cells = <2>;
+       clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml
new file mode 100644
index 0000000000..218ab06c34
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,iproc-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PWM controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  This controller has 4 channels.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,iproc-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: external clock
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clocks
+
+examples:
+  - |
+    pwm@18031000 {
+        compatible = "brcm,iproc-pwm";
+        reg = <0x18031000 0x28>;
+        clocks = <&osc>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
new file mode 100644
index 0000000000..e86c8053b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,kona-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family PWM controller
+
+description:
+  This controller has 6 channels.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-pwm
+      - const: brcm,kona-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm281xx.h>
+
+    pwm@3e01a000 {
+       compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+       reg = <0x3e01a000 0xcc>;
+       clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+       #pwm-cells = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
new file mode 100644
index 0000000000..c0b2028238
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
@@ -0,0 +1,15 @@
+* Cirris Logic CLPS711X PWM controller
+
+Required properties:
+- compatible: Shall contain "cirrus,ep7209-pwm".
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle + clock specifier pair of the PWM reference clock.
+- #pwm-cells: Should be 1. The cell specifies the index of the channel.
+
+Example:
+	pwm: pwm@80000400 {
+		compatible = "cirrus,ep7312-pwm", "cirrus,ep7209-pwm";
+		reg = <0x80000400 0x4>;
+		clocks = <&clks 8>;
+		#pwm-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/pwm/clk-pwm.yaml b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
new file mode 100644
index 0000000000..ec17682915
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock based PWM controller
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description: |
+  Some systems have clocks that can be exposed to external devices.
+  (e.g. by muxing them to GPIO pins)
+  It's often possible to control duty-cycle of such clocks which makes them
+  suitable for generating PWM signal.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: clk-pwm
+
+  clocks:
+    description: Clock used to generate the signal.
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - clocks
+
+examples:
+  - |
+    pwm {
+      compatible = "clk-pwm";
+      #pwm-cells = <2>;
+      clocks = <&gcc 0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pwm_clk_flash_default>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
new file mode 100644
index 0000000000..3afe1480df
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/google,cros-ec-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM controlled by ChromeOS EC
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - '"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>'
+
+description: |
+  Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
+  (EC) and controlled via a host-command interface.
+  An EC PWM node should be only found as a sub-node of the EC node (see
+  Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: PWM controlled using EC_PWM_TYPE_GENERIC channels.
+        items:
+          - const: google,cros-ec-pwm
+      - description: PWM controlled using CROS_EC_PWM_DT_<...> types.
+        items:
+          - const: google,cros-ec-pwm-type
+
+  "#pwm-cells":
+    description: The cell specifies the PWM index.
+    const: 1
+
+required:
+  - compatible
+  - '#pwm-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            interrupts = <101 0>;
+
+            cros_ec_pwm: pwm {
+                compatible = "google,cros-ec-pwm";
+                #pwm-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pwm/img-pwm.txt b/Documentation/devicetree/bindings/pwm/img-pwm.txt
new file mode 100644
index 0000000000..9db6de9731
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/img-pwm.txt
@@ -0,0 +1,24 @@
+*Imagination Technologies PWM DAC driver
+
+Required properties:
+  - compatible: Should be "img,pistachio-pwm"
+  - reg: Should contain physical base address and length of pwm registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+	See ../clock/clock-bindings.txt for details.
+  - clock-names: Must include the following entries.
+    - pwm: PWM operating clock.
+    - sys: PWM system interface clock.
+  - #pwm-cells: Should be 2. See pwm.yaml in this directory for the
+	description of the cells format.
+  - img,cr-periph: Must contain a phandle to the peripheral control
+	syscon node which contains PWM control registers.
+
+Example:
+	pwm: pwm@18101300 {
+		compatible = "img,pistachio-pwm";
+		reg = <0x18101300 0x100>;
+		clocks = <&pwm_clk>, <&system_clk>;
+		clock-names = "pwm", "sys";
+		#pwm-cells = <2>;
+		img,cr-periph = <&cr_periph>;
+	};
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
new file mode 100644
index 0000000000..c01dff3b7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/imx-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PWM controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  "#pwm-cells":
+    description: |
+      Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml
+      in this directory for a description of the cells format.
+    enum:
+      - 2
+      - 3
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-pwm
+          - fsl,imx27-pwm
+      - items:
+          - enum:
+              - fsl,imx25-pwm
+              - fsl,imx31-pwm
+              - fsl,imx50-pwm
+              - fsl,imx51-pwm
+              - fsl,imx53-pwm
+              - fsl,imx6q-pwm
+              - fsl,imx6sl-pwm
+              - fsl,imx6sll-pwm
+              - fsl,imx6sx-pwm
+              - fsl,imx6ul-pwm
+              - fsl,imx7d-pwm
+              - fsl,imx8mm-pwm
+              - fsl,imx8mn-pwm
+              - fsl,imx8mp-pwm
+              - fsl,imx8mq-pwm
+              - fsl,imx8qxp-pwm
+          - const: fsl,imx27-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC PWM ipg clock
+      - description: SoC PWM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    pwm@53fb4000 {
+        #pwm-cells = <3>;
+        compatible = "fsl,imx27-pwm";
+        reg = <0x53fb4000 0x4000>;
+        clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+                 <&clks IMX5_CLK_PWM1_HF_GATE>;
+        clock-names = "ipg", "per";
+        interrupts = <61>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
new file mode 100644
index 0000000000..8bef9dfeba
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/imx-tpm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX TPM PWM controller
+
+maintainers:
+  - Anson Huang <anson.huang@nxp.com>
+
+description: |
+  The TPM counter and period counter are shared between multiple
+  channels, so all channels should use same period setting.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  "#pwm-cells":
+    const: 3
+
+  compatible:
+    enum:
+      - fsl,imx7ulp-pwm
+
+  reg:
+    maxItems: 1
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    pwm@40250000 {
+        compatible = "fsl,imx7ulp-pwm";
+        reg = <0x40250000 0x1000>;
+        assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+        assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+        clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
new file mode 100644
index 0000000000..5b18a5913e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,keembay-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PWM
+
+maintainers:
+  - Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #define KEEM_BAY_A53_GPIO
+
+    pwm@203200a0 {
+        compatible = "intel,keembay-pwm";
+        reg = <0x203200a0 0xe8>;
+        clocks = <&scmi_clk KEEM_BAY_A53_GPIO>;
+        #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
new file mode 100644
index 0000000000..59d7c4d864
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/intel,lgm-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LGM SoC PWM fan controller
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: intel,lgm-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@e0d00000 {
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        #pwm-cells = <2>;
+        clocks = <&cgu0 126>;
+        resets = <&rcu0 0x30 21>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
new file mode 100644
index 0000000000..0a46af240d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS620A PWM Generator
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS620A multi-function sensor generates a fixed-frequency PWM
+  output represented by a "pwm" child node from the parent MFD driver. See
+  Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as
+  well as an example.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs620a-pwm
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
new file mode 100644
index 0000000000..981cfec53f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+  The controller supports one PWM channel and supports only four distinct
+  frequencies (250Hz, 500Hz, 1kHz, 2kHz).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt
new file mode 100644
index 0000000000..43d9f4f08a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt
@@ -0,0 +1,20 @@
+* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
+
+Required properties:
+  - compatible: Should be "nxp,lpc1850-sct-pwm"
+  - reg: Should contain physical base address and length of pwm registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clock/clock-bindings.txt for details.
+  - clock-names: Must include the following entries.
+    - pwm: PWM operating clock.
+  - #pwm-cells: Should be 3. See pwm.yaml in this directory for the description
+    of the cells format.
+
+Example:
+  pwm: pwm@40000000 {
+    compatible = "nxp,lpc1850-sct-pwm";
+    reg = <0x40000000 0x1000>;
+    clocks =<&ccu1 CLK_CPU_SCT>;
+    clock-names = "pwm";
+    #pwm-cells = <3>;
+  };
diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
new file mode 100644
index 0000000000..74b5bc5dd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
@@ -0,0 +1,17 @@
+LPC32XX PWM controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-pwm"
+- reg: physical base address and length of the controller's registers
+
+Examples:
+
+pwm@4005c000 {
+	compatible = "nxp,lpc3220-pwm";
+	reg = <0x4005c000 0x4>;
+};
+
+pwm@4005c004 {
+	compatible = "nxp,lpc3220-pwm";
+	reg = <0x4005c004 0x4>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
new file mode 100644
index 0000000000..0fbe8a6469
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mediatek,mt2712-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PWM Controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2712-pwm
+          - mediatek,mt6795-pwm
+          - mediatek,mt7622-pwm
+          - mediatek,mt7623-pwm
+          - mediatek,mt7628-pwm
+          - mediatek,mt7629-pwm
+          - mediatek,mt7981-pwm
+          - mediatek,mt7986-pwm
+          - mediatek,mt8183-pwm
+          - mediatek,mt8365-pwm
+          - mediatek,mt8516-pwm
+      - items:
+          - enum:
+              - mediatek,mt8195-pwm
+          - const: mediatek,mt8183-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 10
+
+  clock-names:
+    description:
+      This controller needs two input clocks for its core and one
+      clock for each PWM output.
+    minItems: 2
+    items:
+      - const: top
+      - const: main
+      - const: pwm1
+      - const: pwm2
+      - const: pwm3
+      - const: pwm4
+      - const: pwm5
+      - const: pwm6
+      - const: pwm7
+      - const: pwm8
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm0: pwm@11006000 {
+        compatible = "mediatek,mt2712-pwm";
+        reg = <0x11006000 0x1000>;
+        #pwm-cells = <2>;
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_PWM_SEL>, <&pericfg CLK_PERI_PWM>,
+                 <&pericfg CLK_PERI_PWM0>, <&pericfg CLK_PERI_PWM1>,
+                 <&pericfg CLK_PERI_PWM2>, <&pericfg CLK_PERI_PWM3>,
+                 <&pericfg CLK_PERI_PWM4>, <&pericfg CLK_PERI_PWM5>,
+                 <&pericfg CLK_PERI_PWM6>, <&pericfg CLK_PERI_PWM7>;
+        clock-names = "top", "main",
+                      "pwm1", "pwm2",
+                      "pwm3", "pwm4",
+                      "pwm5", "pwm6",
+                      "pwm7", "pwm8";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
new file mode 100644
index 0000000000..153e146df7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DISP_PWM Controller
+
+maintainers:
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-pwm
+          - mediatek,mt6595-disp-pwm
+          - mediatek,mt8173-disp-pwm
+          - mediatek,mt8183-disp-pwm
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-pwm
+              - mediatek,mt8167-disp-pwm
+          - const: mediatek,mt8173-disp-pwm
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-pwm
+              - mediatek,mt8188-disp-pwm
+              - mediatek,mt8192-disp-pwm
+              - mediatek,mt8195-disp-pwm
+          - const: mediatek,mt8183-disp-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Clock
+      - description: Mm Clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: mm
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm0: pwm@1401e000 {
+        compatible = "mediatek,mt8173-disp-pwm";
+        reg = <0x1401e000 0x1000>;
+        #pwm-cells = <2>;
+        clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+                 <&mmsys CLK_MM_DISP_PWM0MM>;
+        clock-names = "main", "mm";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
new file mode 100644
index 0000000000..70d563d44c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip IP corePWM controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  corePWM is an 16 channel pulse width modulator FPGA IP
+
+  https://www.microsemi.com/existing-parts/parts/152118
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: microchip,corepwm-rtl-v4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    enum: [2, 3]
+    description:
+      The only flag supported by the controller is PWM_POLARITY_INVERTED.
+
+  microchip,sync-update-mask:
+    description: |
+      Depending on how the IP is instantiated, there are two modes of operation.
+      In synchronous mode, all channels are updated at the beginning of the PWM period,
+      and in asynchronous mode updates happen as the control registers are written.
+      A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous
+      mode is possible for each channel, and is set by the bitstream programmed to the
+      FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that
+      control the duty cycle for channel x have a second "shadow"/buffer reg synthesised.
+      At runtime a bit wide register exposed to APB can be used to toggle on/off
+      synchronised mode for all channels it has been synthesised for.
+      Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents
+      whether synchronous mode is possible for the PWM channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  microchip,dac-mode-mask:
+    description: |
+      Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates
+      a minimum period pulse train whose High/Low average is that of the chosen duty
+      cycle. This "DAC" will have far better bandwidth and ripple performance than the
+      standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP
+      core, set at instantiation and by the bitstream programmed to the FPGA, determines
+      whether a given channel operates in regular PWM or DAC mode.
+      Each bit corresponds to a PWM channel & represents whether DAC mode is enabled
+      for that channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@41000000 {
+      compatible = "microchip,corepwm-rtl-v4";
+      microchip,sync-update-mask = /bits/ 32 <0>;
+      clocks = <&clkcfg 30>;
+      reg = <0x41000000 0xF0>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
new file mode 100644
index 0000000000..6ffbed204c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mxs-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS PWM controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Anson Huang <anson.huang@nxp.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  fsl,pwm-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the number of PWM devices
+
+required:
+  - compatible
+  - reg
+  - fsl,pwm-number
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@80064000 {
+        compatible = "fsl,imx23-pwm";
+        reg = <0x80064000 0x2000>;
+        #pwm-cells = <3>;
+        fsl,pwm-number = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml
new file mode 100644
index 0000000000..41cea49791
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/nvidia,tegra20-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra PWFM controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-pwm
+          - nvidia,tegra186-pwm
+
+      - items:
+          - enum:
+              - nvidia,tegra30-pwm
+              - nvidia,tegra114-pwm
+              - nvidia,tegra124-pwm
+              - nvidia,tegra132-pwm
+              - nvidia,tegra210-pwm
+          - enum:
+              - nvidia,tegra20-pwm
+
+      - items:
+          - const: nvidia,tegra194-pwm
+          - const: nvidia,tegra186-pwm
+
+      - items:
+          - const: nvidia,tegra234-pwm
+          - const: nvidia,tegra194-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: pwm
+
+  "#pwm-cells":
+    const: 2
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description: configuration for the default/active state
+
+  pinctrl-1:
+    description: configuration for the sleep state
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+allOf:
+  - $ref: pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    pwm: pwm@7000a000 {
+        compatible = "nvidia,tegra20-pwm";
+        reg = <0x7000a000 0x100>;
+        #pwm-cells = <2>;
+        clocks = <&tegra_car TEGRA20_CLK_PWM>;
+        resets = <&tegra_car 17>;
+        reset-names = "pwm";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt
new file mode 100644
index 0000000000..f21b55c957
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt
@@ -0,0 +1,27 @@
+NXP PCA9685 16-channel 12-bit PWM LED controller
+================================================
+
+Required properties:
+  - compatible: "nxp,pca9685-pwm"
+  - #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of
+    the cells format.
+    The index 16 is the ALLCALL channel, that sets all PWM channels at the same
+    time.
+
+Optional properties:
+  - invert (bool): boolean to enable inverted logic
+  - open-drain (bool): boolean to configure outputs with open-drain structure;
+		       if omitted use totem-pole structure
+
+Example:
+
+For LEDs that are directly connected to the PCA, the following setting is
+applicable:
+
+pca: pca@41 {
+	compatible = "nxp,pca9685-pwm";
+	#pwm-cells = <2>;
+	reg = <0x41>;
+	invert;
+	open-drain;
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
new file mode 100644
index 0000000000..527864a4d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-amlogic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic PWM
+
+maintainers:
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson8b-pwm
+          - amlogic,meson-gxbb-pwm
+          - amlogic,meson-gxbb-ao-pwm
+          - amlogic,meson-axg-ee-pwm
+          - amlogic,meson-axg-ao-pwm
+          - amlogic,meson-g12a-ee-pwm
+          - amlogic,meson-g12a-ao-pwm-ab
+          - amlogic,meson-g12a-ao-pwm-cd
+          - amlogic,meson-s4-pwm
+      - items:
+          - const: amlogic,meson-gx-pwm
+          - const: amlogic,meson-gxbb-pwm
+      - items:
+          - const: amlogic,meson-gx-ao-pwm
+          - const: amlogic,meson-gxbb-ao-pwm
+      - items:
+          - const: amlogic,meson8-pwm
+          - const: amlogic,meson8b-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - enum: [clkin0, clkin1]
+      - items:
+          - const: clkin0
+          - const: clkin1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@8550 {
+      compatible = "amlogic,meson-gxbb-pwm";
+      reg = <0x08550 0x10>;
+      clocks = <&xtal>, <&xtal>;
+      clock-names = "clkin0", "clkin1";
+      #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml
new file mode 100644
index 0000000000..15e7fd98de
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PWM controller (Raspberry Pi controller)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2835-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@2020c000 {
+      compatible = "brcm,bcm2835-pwm";
+      reg = <0x2020c000 0x28>;
+      clocks = <&clk_pwm>;
+      #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt
new file mode 100644
index 0000000000..f01e993a49
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt
@@ -0,0 +1,17 @@
+Berlin PWM controller
+
+Required properties:
+- compatible: should be "marvell,berlin-pwm"
+- reg: physical base address and length of the controller's registers
+- clocks: phandle to the input clock
+- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Example:
+
+pwm: pwm@f7f20000 {
+	compatible = "marvell,berlin-pwm";
+	reg = <0xf7f20000 0x40>;
+	clocks = <&chip_clk CLKID_CFG>;
+	#pwm-cells = <3>;
+}
diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
new file mode 100644
index 0000000000..36532cd5ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
@@ -0,0 +1,55 @@
+Freescale FlexTimer Module (FTM) PWM controller
+
+The same FTM PWM device can have a different endianness on different SoCs. The
+device tree provides a property to describing this so that an operating system
+device driver can handle all variants of the device. Refer to the table below
+for the endianness of the FTM PWM block as integrated into the existing SoCs:
+
+	SoC     | FTM-PWM endianness
+	--------+-------------------
+	Vybrid  | LE
+	LS1     | BE
+	LS2     | LE
+
+Please see ../regmap/regmap.txt for more detail about how to specify endian
+modes in device tree.
+
+
+Required properties:
+- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following
+   compatible strings:
+  - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610
+  - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM
+- reg: Physical base address and length of the controller's registers
+- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
+  the cells format.
+- clock-names: Should include the following module clock source entries:
+    "ftm_sys" (module clock, also can be used as counter clock),
+    "ftm_ext" (external counter clock),
+    "ftm_fix" (fixed counter clock),
+    "ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
+- clocks: Must contain a phandle and clock specifier for each entry in
+  clock-names, please see clock/clock-bindings.txt for details of the property
+  values.
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+  See pinctrl/pinctrl-bindings.txt for details of the property values.
+- big-endian: Boolean property, required if the FTM PWM registers use a big-
+  endian rather than little-endian layout.
+
+Example:
+
+pwm0: pwm@40038000 {
+		compatible = "fsl,vf610-ftm-pwm";
+		reg = <0x40038000 0x1000>;
+		#pwm-cells = <3>;
+		clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+		clocks = <&clks VF610_CLK_FTM0>,
+			<&clks VF610_CLK_FTM0_EXT_SEL>,
+			<&clks VF610_CLK_FTM0_FIX_SEL>,
+			<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_1>;
+		big-endian;
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
new file mode 100644
index 0000000000..54dbc2a0e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
@@ -0,0 +1,23 @@
+Hisilicon PWM controller
+
+Required properties:
+-compatible: should contain one SoC specific compatible string
+ The SoC specific strings supported including:
+	"hisilicon,hi3516cv300-pwm"
+	"hisilicon,hi3519v100-pwm"
+	"hisilicon,hi3559v100-shub-pwm"
+	"hisilicon,hi3559v100-pwm
+- reg: physical base address and length of the controller's registers.
+- clocks: phandle and clock specifier of the PWM reference clock.
+- resets: phandle and reset specifier for the PWM controller reset.
+- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Example:
+	pwm: pwm@12130000 {
+		compatible = "hisilicon,hi3516cv300-pwm";
+		reg = <0x12130000 0x10000>;
+		clocks = <&crg_ctrl HI3516CV300_PWM_CLK>;
+		resets = <&crg_ctrl 0x38 0>;
+		#pwm-cells = <3>;
+	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
new file mode 100644
index 0000000000..f214305a8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
@@ -0,0 +1,58 @@
+TI/National Semiconductor LP3943 PWM controller
+
+Required properties:
+  - compatible: "ti,lp3943-pwm"
+  - #pwm-cells: Should be 2. See pwm.yaml in this directory for a
+                description of the cells format.
+                Note that this hardware limits the period length to the
+                range 6250~1600000.
+  - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
+    0 = output 0
+    1 = output 1
+    .
+    .
+    15 = output 15
+
+Example:
+PWM 0 is for RGB LED brightness control
+PWM 1 is for brightness control of LP8557 backlight device
+
+&i2c3 {
+	lp3943@60 {
+		compatible = "ti,lp3943";
+		reg = <0x60>;
+
+		/*
+		 * PWM 0 : output 8, 9 and 10
+		 * PWM 1 : output 15
+		 */
+		pwm3943: pwm {
+			compatible = "ti,lp3943-pwm";
+			#pwm-cells = <2>;
+			ti,pwm0 = <8 9 10>;
+			ti,pwm1 = <15>;
+		};
+	};
+
+};
+
+/* LEDs control with PWM 0 of LP3943 */
+pwmleds {
+	compatible = "pwm-leds";
+	rgb {
+		label = "indi::rgb";
+		pwms = <&pwm3943 0 10000>;
+		max-brightness = <255>;
+	};
+};
+
+&i2c4 {
+	/* Backlight control with PWM 1 of LP3943 */
+	backlight@2c {
+		compatible = "ti,lp8557";
+		reg = <0x2c>;
+
+		pwms = <&pwm3943 1 10000>;
+		pwm-names = "lp8557";
+	};
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
new file mode 100644
index 0000000000..25ecfe14c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
@@ -0,0 +1,22 @@
+* OMAP PWM for dual-mode timers
+
+Required properties:
+- compatible: Shall contain "ti,omap-dmtimer-pwm".
+- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
+  about these timers.
+- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Optional properties:
+- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
+- ti,clock-source: Set dmtimer parent clock, values between 0 and 2:
+  - 0x00 - high-frequency system clock (timer_sys_ck)
+  - 0x01 - 32-kHz always-on clock (timer_32k_ck)
+  - 0x02 - external clock (timer_ext_ck, OMAP2 only)
+
+Example:
+	pwm9: dmtimer-pwm@9 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer9>;
+		#pwm-cells = <3>;
+	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
new file mode 100644
index 0000000000..f2d1dc7e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PWM controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk2928-pwm
+      - const: rockchip,rk3288-pwm
+      - const: rockchip,rk3328-pwm
+      - const: rockchip,vop-pwm
+      - items:
+          - const: rockchip,rk3036-pwm
+          - const: rockchip,rk2928-pwm
+      - items:
+          - enum:
+              - rockchip,rk3128-pwm
+              - rockchip,rk3368-pwm
+              - rockchip,rk3399-pwm
+              - rockchip,rv1108-pwm
+          - const: rockchip,rk3288-pwm
+      - items:
+          - enum:
+              - rockchip,px30-pwm
+              - rockchip,rk3308-pwm
+              - rockchip,rk3568-pwm
+              - rockchip,rk3588-pwm
+          - const: rockchip,rk3328-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  "#pwm-cells":
+    enum: [2, 3]
+    description:
+      Must be 2 (rk2928) or 3 (rk3288 and later).
+      See pwm.yaml for a description of the cell format.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3328-pwm
+              - rockchip,rv1108-pwm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Used to derive the functional clock for the device.
+            - description: Used as the APB bus clock.
+
+        clock-names:
+          items:
+            - const: pwm
+            - const: pclk
+
+      required:
+        - clocks
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+          description:
+            Used both to derive the functional clock
+            for the device and as the bus clock.
+
+      required:
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    pwm0: pwm@20030000 {
+      compatible = "rockchip,rk2928-pwm";
+      reg = <0x20030000 0x10>;
+      clocks = <&cru PCLK_PWM01>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
new file mode 100644
index 0000000000..2162f661ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-samsung.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC PWM timers
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Samsung SoCs contain PWM timer blocks which can be used for system clock source
+  and clock event timers, as well as to drive SoC outputs with PWM signal. Each
+  PWM timer block provides 5 PWM channels (not all of them can drive physical
+  outputs - see SoC and board manual).
+
+  Be aware that the clocksource driver supports only uniprocessor systems.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,s3c2410-pwm             # 16-bit, S3C24xx
+          - samsung,s3c6400-pwm             # 32-bit, S3C64xx
+          - samsung,s5p6440-pwm             # 32-bit, S5P64x0
+          - samsung,s5pc100-pwm             # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs
+          - samsung,exynos4210-pwm          # 32-bit, Exynos
+      - items:
+          - enum:
+              - samsung,exynosautov9-pwm
+          - const: samsung,exynos4210-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description: |
+      Should contain all following required clock names:
+      - "timers" - PWM base clock used to generate PWM signals,
+      and any subset of following optional clock names:
+      - "pwm-tclk0" - first external PWM clock source,
+      - "pwm-tclk1" - second external PWM clock source.
+      Note that not all IP variants allow using all external clock sources.
+      Refer to SoC documentation to learn which clock source configurations
+      are available.
+    oneOf:
+      - items:
+          - const: timers
+      - items:
+          - const: timers
+          - const: pwm-tclk0
+      - items:
+          - const: timers
+          - const: pwm-tclk1
+      - items:
+          - const: timers
+          - const: pwm-tclk0
+          - const: pwm-tclk1
+
+  interrupts:
+    description:
+      One interrupt per timer, starting at timer 0. Necessary only for SoCs which
+      use PWM clocksource.
+    minItems: 1
+    maxItems: 5
+
+  "#pwm-cells":
+    description:
+      The only third cell flag supported by this binding
+      is PWM_POLARITY_INVERTED.
+    const: 3
+
+  samsung,pwm-outputs:
+    description:
+      A list of PWM channels used as PWM outputs on particular platform.
+      It is an array of up to 5 elements being indices of PWM channels
+      (from 0 to 4), the order does not matter.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    uniqueItems: true
+    items:
+      minimum: 0
+      maximum: 4
+
+required:
+  - clocks
+  - clock-names
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-pwm
+              - samsung,s3c6400-pwm
+              - samsung,s5p6440-pwm
+              - samsung,s5pc100-pwm
+    then:
+      required:
+        - interrupts
+
+examples:
+  - |
+    pwm@7f006000 {
+        compatible = "samsung,s3c6400-pwm";
+        reg = <0x7f006000 0x1000>;
+        interrupt-parent = <&vic0>;
+        interrupts = <23>, <24>, <25>, <27>, <28>;
+        clocks = <&clock 67>;
+        clock-names = "timers";
+        samsung,pwm-outputs = <0>, <1>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
new file mode 100644
index 0000000000..bae9931289
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive PWM controller
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+  Unlike most other PWM controllers, the SiFive PWM controller currently
+  only supports one period for all channels in the PWM. All PWMs need to
+  run at the same period. The period also has significant restrictions on
+  the values it can achieve, which the driver rounds to the nearest
+  achievable period. PWM RTL that corresponds to the IP block version
+  numbers can be found here -
+
+  https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sifive,fu540-c000-pwm
+          - sifive,fu740-c000-pwm
+      - const: sifive,pwm0
+    description:
+      Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported
+      compatible strings are "sifive,fu540-c000-pwm" and
+      "sifive,fu740-c000-pwm" for the SiFive PWM v0 as integrated onto the
+      SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the
+      SiFive PWM v0 IP block with no chip integration tweaks.
+      Please refer to sifive-blocks-ip-versioning.txt for details.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  interrupts:
+    maxItems: 4
+    description:
+      Each PWM instance in FU540-C000 has 4 comparators. One interrupt per comparator.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm:  pwm@10020000 {
+      compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
+      reg = <0x10020000 0x1000>;
+      clocks = <&tlclk>;
+      interrupt-parent = <&plic>;
+      interrupts = <42>, <43>, <44>, <45>;
+      #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sprd.txt b/Documentation/devicetree/bindings/pwm/pwm-sprd.txt
new file mode 100644
index 0000000000..87b206fd06
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sprd.txt
@@ -0,0 +1,40 @@
+Spreadtrum PWM controller
+
+Spreadtrum SoCs PWM controller provides 4 PWM channels.
+
+Required properties:
+- compatible : Should be "sprd,ums512-pwm".
+- reg: Physical base address and length of the controller's registers.
+- clocks: The phandle and specifier referencing the controller's clocks.
+- clock-names: Should contain following entries:
+  "pwmn": used to derive the functional clock for PWM channel n (n range: 0 ~ 3).
+  "enablen": for PWM channel n enable clock (n range: 0 ~ 3).
+- #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Optional properties:
+- assigned-clocks: Reference to the PWM clock entries.
+- assigned-clock-parents: The phandle of the parent clock of PWM clock.
+
+Example:
+	pwms: pwm@32260000 {
+		compatible = "sprd,ums512-pwm";
+		reg = <0 0x32260000 0 0x10000>;
+		clock-names = "pwm0", "enable0",
+			"pwm1", "enable1",
+			"pwm2", "enable2",
+			"pwm3", "enable3";
+		clocks = <&aon_clk CLK_PWM0>, <&aonapb_gate CLK_PWM0_EB>,
+		       <&aon_clk CLK_PWM1>, <&aonapb_gate CLK_PWM1_EB>,
+		       <&aon_clk CLK_PWM2>, <&aonapb_gate CLK_PWM2_EB>,
+		       <&aon_clk CLK_PWM3>, <&aonapb_gate CLK_PWM3_EB>;
+		assigned-clocks = <&aon_clk CLK_PWM0>,
+			<&aon_clk CLK_PWM1>,
+			<&aon_clk CLK_PWM2>,
+			<&aon_clk CLK_PWM3>;
+		assigned-clock-parents = <&ext_26m>,
+			<&ext_26m>,
+			<&ext_26m>,
+			<&ext_26m>;
+		#pwm-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-st.txt b/Documentation/devicetree/bindings/pwm/pwm-st.txt
new file mode 100644
index 0000000000..19fce774ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-st.txt
@@ -0,0 +1,43 @@
+STMicroelectronics PWM driver bindings
+--------------------------------------
+
+Required parameters:
+- compatible :		"st,pwm"
+- #pwm-cells : 		Number of cells used to specify a PWM. First cell
+			specifies the per-chip index of the PWM to use and the
+			second cell is the period in nanoseconds - fixed to 2
+			for STiH41x.
+- reg :			Physical base address and length of the controller's
+			registers.
+- pinctrl-names: 	Set to "default".
+- pinctrl-0: 		List of phandles pointing to pin configuration nodes
+			for PWM module.
+			For Pinctrl properties, please refer to [1].
+- clock-names: 		Valid entries are "pwm" and/or "capture".
+- clocks: 		phandle of the clock used by the PWM module.
+			For Clk properties, please refer to [2].
+- interrupts:		IRQ for the Capture device
+
+Optional properties:
+- st,pwm-num-chan:	Number of available PWM channels.  Default is 0.
+- st,capture-num-chan:	Number of available Capture channels.  Default is 0.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Example:
+
+pwm1: pwm@fe510000 {
+	compatible = "st,pwm";
+	reg = <0xfe510000 0x68>;
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1_chan0_default
+		     &pinctrl_pwm1_chan1_default
+		     &pinctrl_pwm1_chan2_default
+		     &pinctrl_pwm1_chan3_default>;
+	clocks = <&clk_sysin>;
+	clock-names = "pwm";
+	st,pwm-num-chan = <4>;
+	st,capture-num-chan = <2>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
new file mode 100644
index 0000000000..3840ae709b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-tiecap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SOC ECAP based APWM controller
+
+maintainers:
+  - Vignesh R <vigneshr@ti.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3352-ecap
+      - items:
+          - enum:
+              - ti,da850-ecap
+              - ti,am4372-ecap
+              - ti,dra746-ecap
+              - ti,k2g-ecap
+              - ti,am654-ecap
+              - ti,am64-ecap
+          - const: ti,am3352-ecap
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+    description: |
+      See pwm.yaml in this directory for a description of the cells format.
+      The only third cell flag supported by this binding is PWM_POLARITY_INVERTED.
+
+  clock-names:
+    const: fck
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ecap0: pwm@48300100 { /* ECAP on am33xx */
+        compatible = "ti,am3352-ecap";
+        #pwm-cells = <3>;
+        reg = <0x48300100 0x80>;
+        clocks = <&l4ls_gclk>;
+        clock-names = "fck";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
new file mode 100644
index 0000000000..70a8f76621
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm-tiehrpwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI SOC EHRPWM based PWM controller
+
+maintainers:
+  - Vignesh R <vigneshr@ti.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3352-ehrpwm
+      - items:
+          - enum:
+              - ti,da850-ehrpwm
+              - ti,am4372-ehrpwm
+              - ti,dra746-ehrpwm
+              - ti,am654-ehrpwm
+              - ti,am64-epwm
+          - const: ti,am3352-ehrpwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+    description: |
+      See pwm.yaml in this directory for a description of the cells format.
+      The only third cell flag supported by this binding is PWM_POLARITY_INVERTED.
+
+  clock-names:
+    items:
+      - const: tbclk
+      - const: fck
+
+  clocks:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
+        compatible = "ti,am3352-ehrpwm";
+        #pwm-cells = <3>;
+        reg = <0x48300200 0x100>;
+        clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+        clock-names = "tbclk", "fck";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
new file mode 100644
index 0000000000..4633697fbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -0,0 +1,58 @@
+TI SOC based PWM Subsystem
+
+Required properties:
+- compatible: Must be "ti,<soc>-pwmss".
+  for am33xx  - compatible = "ti,am33xx-pwmss";
+  for am4372  - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+  for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
+
+- reg: physical base address and size of the registers map.
+- address-cells: Specify the number of u32 entries needed in child nodes.
+		  Should set to 1.
+- size-cells: specify number of u32 entries needed to specify child nodes size
+		in reg property. Should set to 1.
+- ranges: describes the address mapping of a memory-mapped bus. Should set to
+	   physical address map of child's base address, physical address within
+	   parent's address  space and length of the address map. For am33xx,
+	   3 set of child register maps present, ECAP register space, EQEP
+	   register space, EHRPWM register space.
+
+Also child nodes should also populated under PWMSS DT node.
+
+Example:
+epwmss0: epwmss@48300000 { /* PWMSS for am33xx */
+	compatible = "ti,am33xx-pwmss";
+	reg = <0x48300000 0x10>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+		  0x48300180 0x48300180 0x80   /* EQEP */
+		  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+	/* child nodes go here */
+};
+
+epwmss0: epwmss@48300000 { /* PWMSS for am4372 */
+	compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"
+	reg = <0x48300000 0x10>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+		  0x48300180 0x48300180 0x80   /* EQEP */
+		  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+	/* child nodes go here */
+};
+
+epwmss0: epwmss@4843e000 { /* PWMSS for DRA7xx */
+	compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+	reg = <0x4843e000 0x30>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	/* child nodes go here */
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt
new file mode 100644
index 0000000000..084886bd72
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm.txt
@@ -0,0 +1,60 @@
+Specifying PWM information for devices
+======================================
+
+1) PWM user nodes
+-----------------
+
+PWM users should specify a list of PWM devices that they want to use
+with a property containing a 'pwm-list':
+
+	pwm-list ::= <single-pwm> [pwm-list]
+	single-pwm ::= <pwm-phandle> <pwm-specifier>
+	pwm-phandle : phandle to PWM controller node
+	pwm-specifier : array of #pwm-cells specifying the given PWM
+			(controller specific)
+
+PWM properties should be named "pwms". The exact meaning of each pwms
+property must be documented in the device tree binding for each device.
+An optional property "pwm-names" may contain a list of strings to label
+each of the PWM devices listed in the "pwms" property. If no "pwm-names"
+property is given, the name of the user node will be used as fallback.
+
+Drivers for devices that use more than a single PWM device can use the
+"pwm-names" property to map the name of the PWM device requested by the
+pwm_get() call to an index into the list given by the "pwms" property.
+
+The following example could be used to describe a PWM-based backlight
+device:
+
+	pwm: pwm {
+		#pwm-cells = <2>;
+	};
+
+	[...]
+
+	bl: backlight {
+		pwms = <&pwm 0 5000000>;
+		pwm-names = "backlight";
+	};
+
+Note that in the example above, specifying the "pwm-names" is redundant
+because the name "backlight" would be used as fallback anyway.
+
+pwm-specifier typically encodes the chip-relative PWM number and the PWM
+period in nanoseconds.
+
+Optionally, the pwm-specifier can encode a number of flags (defined in
+<dt-bindings/pwm/pwm.h>) in a third cell:
+- PWM_POLARITY_INVERTED: invert the PWM signal polarity
+
+Example with optional PWM specifier for inverse polarity
+
+	bl: backlight {
+		pwms = <&pwm 0 5000000 PWM_POLARITY_INVERTED>;
+		pwm-names = "backlight";
+	};
+
+2) PWM controller nodes
+-----------------------
+
+See pwm.yaml.
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
new file mode 100644
index 0000000000..abd9fa8733
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM controllers (providers)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^pwm(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#pwm-cells":
+    description:
+      Number of cells in a PWM specifier.
+
+required:
+  - "#pwm-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    pwm: pwm@1c20e00 {
+        compatible = "allwinner,sun7i-a20-pwm";
+        reg = <0x01c20e00 0xc>;
+        clocks = <&osc24M>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
new file mode 100644
index 0000000000..5ae9f1e3c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
@@ -0,0 +1,30 @@
+Marvell PWM controller
+
+Required properties:
+- compatible: should be one or more of:
+  - "marvell,pxa250-pwm"
+  - "marvell,pxa270-pwm"
+  - "marvell,pxa168-pwm"
+  - "marvell,pxa910-pwm"
+- reg: Physical base address and length of the registers used by the PWM channel
+  Note that one device instance must be created for each PWM that is used, so the
+  length covers only the register window for one PWM output, not that of the
+  entire PWM controller.  Currently length is 0x10 for all supported devices.
+- #pwm-cells: Should be 1.  This cell is used to specify the period in
+  nanoseconds.
+
+Example PWM device node:
+
+pwm0: pwm@40b00000 {
+	compatible = "marvell,pxa250-pwm";
+	reg = <0x40b00000 0x10>;
+	#pwm-cells = <1>;
+};
+
+Example PWM client node:
+
+backlight {
+	compatible = "pwm-backlight";
+	pwms = <&pwm0 5000000>;
+	...
+}
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
new file mode 100644
index 0000000000..6b6a302a17
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/renesas,pwm-rcar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PWM Timer Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,pwm-r8a7742   # RZ/G1H
+          - renesas,pwm-r8a7743   # RZ/G1M
+          - renesas,pwm-r8a7744   # RZ/G1N
+          - renesas,pwm-r8a7745   # RZ/G1E
+          - renesas,pwm-r8a77470  # RZ/G1C
+          - renesas,pwm-r8a774a1  # RZ/G2M
+          - renesas,pwm-r8a774b1  # RZ/G2N
+          - renesas,pwm-r8a774c0  # RZ/G2E
+          - renesas,pwm-r8a774e1  # RZ/G2H
+          - renesas,pwm-r8a7778   # R-Car M1A
+          - renesas,pwm-r8a7779   # R-Car H1
+          - renesas,pwm-r8a7790   # R-Car H2
+          - renesas,pwm-r8a7791   # R-Car M2-W
+          - renesas,pwm-r8a7794   # R-Car E2
+          - renesas,pwm-r8a7795   # R-Car H3
+          - renesas,pwm-r8a7796   # R-Car M3-W
+          - renesas,pwm-r8a77961  # R-Car M3-W+
+          - renesas,pwm-r8a77965  # R-Car M3-N
+          - renesas,pwm-r8a77970  # R-Car V3M
+          - renesas,pwm-r8a77980  # R-Car V3H
+          - renesas,pwm-r8a77990  # R-Car E3
+          - renesas,pwm-r8a77995  # R-Car D3
+          - renesas,pwm-r8a779a0  # R-Car V3U
+          - renesas,pwm-r8a779g0  # R-Car V4H
+      - const: renesas,pwm-rcar
+
+  reg:
+    # base address and length of the registers block for the PWM.
+    maxItems: 1
+
+  '#pwm-cells':
+    # should be 2. See pwm.yaml in this directory for a description of
+    # the cells format.
+    const: 2
+
+  clocks:
+    # clock phandle and specifier pair.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,pwm-r8a7778
+                - renesas,pwm-r8a7779
+    then:
+      required:
+        - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7743-sysc.h>
+
+    pwm0: pwm@e6e30000 {
+        compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
+        reg = <0xe6e30000 0x8>;
+        clocks = <&cpg CPG_MOD 523>;
+        power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+        resets = <&cpg 523>;
+        #pwm-cells = <2>;
+        pinctrl-0 = <&pwm0_pins>;
+        pinctrl-names = "default";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
new file mode 100644
index 0000000000..a3e52b22dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/renesas,tpu-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Timer Pulse Unit PWM Controller
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: renesas,tpu
+  required:
+    - compatible
+    - '#pwm-cells'
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,tpu-r8a73a4   # R-Mobile APE6
+          - renesas,tpu-r8a7740   # R-Mobile A1
+          - renesas,tpu-r8a7742   # RZ/G1H
+          - renesas,tpu-r8a7743   # RZ/G1M
+          - renesas,tpu-r8a7744   # RZ/G1N
+          - renesas,tpu-r8a7745   # RZ/G1E
+          - renesas,tpu-r8a7790   # R-Car H2
+          - renesas,tpu-r8a7791   # R-Car M2-W
+          - renesas,tpu-r8a7792   # R-Car V2H
+          - renesas,tpu-r8a7793   # R-Car M2-N
+          - renesas,tpu-r8a7794   # R-Car E2
+          - renesas,tpu-r8a7795   # R-Car H3
+          - renesas,tpu-r8a7796   # R-Car M3-W
+          - renesas,tpu-r8a77961  # R-Car M3-W+
+          - renesas,tpu-r8a77965  # R-Car M3-N
+          - renesas,tpu-r8a77970  # R-Car V3M
+          - renesas,tpu-r8a77980  # R-Car V3H
+          - renesas,tpu-r8a779a0  # R-Car V3U
+          - renesas,tpu-r8a779g0  # R-Car V4H
+      - const: renesas,tpu
+
+  reg:
+    # Base address and length of each memory resource used by the PWM
+    # controller hardware module.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#pwm-cells':
+    # should be 3. See pwm.yaml in this directory for a description of
+    # the cells format. The only third cell flag supported by this binding is
+    # PWM_POLARITY_INVERTED.
+    const: 3
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,tpu-r8a73a4
+                - renesas,tpu-r8a7740
+    then:
+      required:
+        - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+
+    tpu: pwm@e6600000 {
+        compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+        reg = <0xe6600000 0x148>;
+        clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+        power-domains = <&pd_a3sp>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
new file mode 100644
index 0000000000..4d0b596444
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/snps,dw-apb-timers-pwm2.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/snps,dw-apb-timers-pwm2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DW-APB timers PWM controller
+
+maintainers:
+  - Ben Dooks <ben.dooks@sifive.com>
+
+description:
+  This describes the DesignWare APB timers module when used in the PWM
+  mode. The IP core can be generated with various options which can
+  control the functionality, the number of PWMs available and other
+  internal controls the designer requires.
+
+  The IP block has a version register so this can be used for detection
+  instead of having to encode the IP version number in the device tree
+  compatible.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-apb-timers-pwm2
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+  clocks:
+    items:
+      - description: Interface bus clock
+      - description: PWM reference clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: timer
+
+  snps,pwm-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of PWM channels configured for this instance
+    enum: [1, 2, 3, 4, 5, 6, 7, 8]
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@180000 {
+      compatible = "snps,dw-apb-timers-pwm2";
+      reg = <0x180000 0x200>;
+      #pwm-cells = <3>;
+      clocks = <&bus>, <&timer>;
+      clock-names = "bus", "timer";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/spear-pwm.txt b/Documentation/devicetree/bindings/pwm/spear-pwm.txt
new file mode 100644
index 0000000000..95894128b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/spear-pwm.txt
@@ -0,0 +1,17 @@
+== ST SPEAr SoC PWM controller ==
+
+Required properties:
+- compatible: should be one of:
+  - "st,spear320-pwm"
+  - "st,spear1340-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Example:
+
+        pwm: pwm@a8000000 {
+            compatible ="st,spear320-pwm";
+            reg = <0xa8000000 0x1000>;
+            #pwm-cells = <2>;
+        };
diff --git a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt
new file mode 100644
index 0000000000..f401316e02
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt
@@ -0,0 +1,18 @@
+== ST STMPE PWM controller ==
+
+This is a PWM block embedded in the ST Microelectronics STMPE
+(ST Multi-Purpose Expander) chips. The PWM is registered as a
+subdevices of the STMPE MFD device.
+
+Required properties:
+- compatible: should be:
+  - "st,stmpe-pwm"
+- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Example:
+
+pwm0: pwm {
+	compatible = "st,stmpe-pwm";
+	#pwm-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
new file mode 100644
index 0000000000..d4fc9e8db1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/sunplus,sp7021-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoC SP7021 PWM Controller
+
+maintainers:
+  - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 2
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clocks
+
+examples:
+  - |
+    pwm: pwm@9c007a00 {
+      compatible = "sunplus,sp7021-pwm";
+      reg = <0x9c007a00 0x80>;
+      clocks = <&clkc 0xa2>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
new file mode 100644
index 0000000000..d97ca1964e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
@@ -0,0 +1,17 @@
+Texas Instruments TWL series PWM drivers
+
+Supported PWMs:
+On TWL4030 series: PWM1 and PWM2
+On TWL6030 series: PWM0 and PWM1
+
+Required properties:
+- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm"
+- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Example:
+
+twl_pwm: pwm {
+	compatible = "ti,twl6030-pwm";
+	#pwm-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt
new file mode 100644
index 0000000000..31ca1b032e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt
@@ -0,0 +1,17 @@
+Texas Instruments TWL series PWM drivers connected to LED terminals
+
+Supported PWMs:
+On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals)
+On TWL6030 series: LED PWM (mainly used as charging indicator LED)
+
+Required properties:
+- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled"
+- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
+  the cells format.
+
+Example:
+
+twl_pwmled: pwmled {
+	compatible = "ti,twl6030-pwmled";
+	#pwm-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
new file mode 100644
index 0000000000..46622661e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/toshiba,pwm-visconti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti PWM Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,visconti-pwm
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pwm: pwm@241c0000 {
+            compatible = "toshiba,visconti-pwm";
+            reg = <0 0x241c0000 0 0x1000>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pwm_mux>;
+            #pwm-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000000..4fba93ce19
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,18 @@
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
+  the cells format. The only third cell flag supported by this binding is
+  PWM_POLARITY_INVERTED.
+- clocks: phandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+	#pwm-cells = <3>;
+	compatible = "via,vt8500-pwm";
+	reg = <0xd8220000 0x1000>;
+	clocks = <&clkpwm>;
+};
diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
new file mode 100644
index 0000000000..873096be02
--- /dev/null
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -0,0 +1,29 @@
+Devicetree binding for regmap
+
+Optional properties:
+
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianness
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
+
+Examples:
+Scenario 1 : a register set in big-endian mode.
+dev: dev@40031000 {
+	      compatible = "syscon";
+	      reg = <0x40031000 0x1000>;
+	      big-endian;
+	      ...
+};
diff --git a/Documentation/devicetree/bindings/regulator/88pg86x.txt b/Documentation/devicetree/bindings/regulator/88pg86x.txt
new file mode 100644
index 0000000000..13b7f49a2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pg86x.txt
@@ -0,0 +1,22 @@
+Marvell 88PG867/88PG868 voltage regulators
+
+Required properties:
+- compatible: one of "marvell,88pg867", "marvell,88pg868";
+- reg: I2C slave address.
+
+Optional subnodes for regulators: "buck1", "buck2", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+	pg868@19 {
+		compatible = "marvell,88pg868";
+		reg = <0x19>;
+
+		vcpu: buck1 {
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1350000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/88pm800.txt b/Documentation/devicetree/bindings/regulator/88pm800.txt
new file mode 100644
index 0000000000..e8a54c2a58
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm800.txt
@@ -0,0 +1,38 @@
+Marvell 88PM800 regulator
+
+Required properties:
+- compatible: "marvell,88pm800"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+
+The valid names for regulators are:
+
+  buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
+  ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
+
+Example:
+
+	pmic: 88pm800@31 {
+		compatible = "marvell,88pm800";
+		reg = <0x31>;
+
+		regulators {
+			buck1 {
+			        regulator-min-microvolt = <600000>;
+			        regulator-max-microvolt = <3950000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+			ldo1 {
+			        regulator-min-microvolt = <600000>;
+			        regulator-max-microvolt = <15000000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt
new file mode 100644
index 0000000000..1267b3e1a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt
@@ -0,0 +1,30 @@
+Marvell 88PM860x regulator
+
+Required properties:
+- compatible: "marvell,88pm860x"
+- reg: I2C slave address
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the regulator-compatible
+  property, with valid values listed below.
+
+Example:
+
+	pmic: 88pm860x@34 {
+		compatible = "marvell,88pm860x";
+		reg = <0x34>;
+
+		regulators {
+			BUCK1 {
+			        regulator-min-microvolt = <1000000>;
+			        regulator-max-microvolt = <1500000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+			BUCK3 {
+			        regulator-min-microvolt = <1000000>;
+			        regulator-max-microvolt = <3000000>;
+			        regulator-boot-on;
+			        regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
new file mode 100644
index 0000000000..b8ca967bc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8600 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8600
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8600 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^(SUDCDC_REG4|LDO_REG9|LDO_REG10)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      "^LDO[5-8]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl-supply:
+            description: Handle to the INL input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8600";
+        reg = <0x5a>;
+
+        regulators {
+          SUDCDC_REG4 {
+            regulator-min-microvolt = <5300000>;
+            regulator-max-microvolt = <5300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO5 {
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO6 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO7 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO8 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG9 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG10 {
+            inl-supply = <&vcc>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
new file mode 100644
index 0000000000..02f45b5834
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8846 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8846
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8846 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  inl1-supply:
+    description: Handle to the INL1 input supply (REG5-7)
+
+  inl2-supply:
+    description: Handle to the INL2 input supply (REG8-9)
+
+  inl3-supply:
+    description: Handle to the INL3 input supply (REG10-12)
+
+  vp1-supply:
+    description: Handle to the VP1 input supply (REG1)
+
+  vp2-supply:
+    description: Handle to the VP2 input supply (REG2)
+
+  vp3-supply:
+    description: Handle to the VP3 input supply (REG3)
+
+  vp4-supply:
+    description: Handle to the VP4 input supply (REG4)
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^REG([1-9]|1[0-2])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8846";
+        reg = <0x5a>;
+
+        system-power-controller;
+
+        regulators {
+          REG1 {
+            regulator-name = "VCC_DDR";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-always-on;
+          };
+
+          REG2 {
+            regulator-name = "VCC_IO";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG3 {
+            regulator-name = "VDD_LOG";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG4 {
+            regulator-name = "VCC_20";
+            regulator-min-microvolt = <2000000>;
+            regulator-max-microvolt = <2000000>;
+            regulator-always-on;
+          };
+
+          REG5 {
+            regulator-name = "VCCIO_SD";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG6 {
+            regulator-name = "VDD10_LCD";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG7 {
+            regulator-name = "VCC_WL";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG8 {
+            regulator-name = "VCCA_33";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG9 {
+            regulator-name = "VCC_LAN";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG10 {
+            regulator-name = "VDD_10";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG11 {
+            regulator-name = "VCC_18";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          REG12 {
+            regulator-name = "VCC18_LCD";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
new file mode 100644
index 0000000000..afe1abc2d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8865 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8865
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8865 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC_REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC_REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC_REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^LDO_REG[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^LDO_REG[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8865";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          DCDC_REG1 {
+            regulator-name = "VCC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          DCDC_REG2 {
+            regulator-name = "VCC_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1150000>;
+              regulator-suspend-max-microvolt = <1150000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          DCDC_REG3 {
+            regulator-name = "VCC_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          LDO_REG1 {
+            regulator-name = "VDDANA";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          LDO_REG2 {
+            regulator-name = "FUSE_2V5";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
new file mode 100644
index 0000000000..bdf3f7d34e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945a regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8945a
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8945a is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG_DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG_DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG_DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^REG_LDO[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^REG_LDO[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+  charger:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: active-semi,act8945a-charger
+
+      interrupts:
+        maxItems: 1
+
+      active-semi,chglev-gpios:
+        description: CGHLEV GPIO
+        maxItems: 1
+
+      active-semi,lbo-gpios:
+        description: LBO GPIO
+        maxItems: 1
+
+      active-semi,input-voltage-threshold-microvolt:
+        description: Input voltage threshold
+        maxItems: 1
+
+      active-semi,precondition-timeout:
+        description: Precondition timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-semi,total-timeout:
+        description: Total timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - compatible
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/atmel-flexcom.h>
+    #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8945a";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          REG_DCDC1 {
+            regulator-name = "VDD_1V35";
+            regulator-min-microvolt = <1350000>;
+            regulator-max-microvolt = <1350000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1400000>;
+              regulator-suspend-max-microvolt = <1400000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          REG_DCDC2 {
+            regulator-name = "VDD_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_DCDC3 {
+            regulator-name = "VDD_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO1 {
+            regulator-name = "VDD_FUSE";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO2 {
+            regulator-name = "VDD_3V3_LP";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO3 {
+            regulator-name = "VDD_LED";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO4 {
+            regulator-name = "VDD_SDHC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+        };
+
+        charger {
+          compatible = "active-semi,act8945a-charger";
+          pinctrl-names = "default";
+          pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+          interrupt-parent = <&pioA>;
+          interrupts = <45 IRQ_TYPE_EDGE_RISING>;
+
+          active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+          active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+          active-semi,input-voltage-threshold-microvolt = <6600>;
+          active-semi,precondition-timeout = <40>;
+          active-semi,total-timeout = <3>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
new file mode 100644
index 0000000000..9e36d5467b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Buck Converter for MAX77540/MAX77541
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  This is a part of device tree bindings for ADI MAX77540/MAX77541
+
+  The buck converter is represented as a sub-node of the PMIC node on the device tree.
+
+  The device has two buck regulators.
+  See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for
+  additional information and example.
+
+patternProperties:
+  "^buck[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Buck regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 300000
+      regulator-max-microvolt:
+        maximum: 5200000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/adi,max77857.yaml b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml
new file mode 100644
index 0000000000..d1fa74aca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77857.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77857.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX77857 Buck-Boost Converter
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+  - Okan Sahin <Okan.Sahin@analog.com>
+
+description: Analog Devices MAX77857 Buck-Boost Converter
+
+properties:
+  compatible:
+    enum:
+      - adi,max77831
+      - adi,max77857
+      - adi,max77859
+      - adi,max77859a
+
+  reg:
+    description: I2C address of the device
+    items:
+      - enum: [0x66, 0x67, 0x6E, 0x6F]
+
+  interrupts:
+    maxItems: 1
+
+  adi,switch-frequency-hz:
+    description: Switching frequency of the Buck-Boost converter in Hz.
+    items:
+      - enum: [1200000, 1500000, 1800000, 2100000]
+
+  adi,rtop-ohms:
+    description: Top feedback resistor value in ohms for external feedback.
+    minimum: 150000
+    maximum: 330000
+
+  adi,rbot-ohms:
+    description: Bottom feedback resistor value in ohms for external feedback.
+
+dependencies:
+  adi,rtop-ohms: [ 'adi,rbot-ohms' ]
+  adi,rbot-ohms: [ 'adi,rtop-ohms' ]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: regulator.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,max77831
+
+    then:
+      properties:
+        adi,switch-frequency-hz:
+          items:
+            enum: [1200000, 1500000, 1800000]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@66 {
+            reg = <0x66>;
+            compatible = "adi,max77857";
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+            adi,rtop-ohms = <312000>;
+            adi,rbot-ohms = <12000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
new file mode 100644
index 0000000000..1725037854
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Anatop Voltage Regulators
+
+maintainers:
+  - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: fsl,anatop-regulator
+
+  regulator-name: true
+
+  anatop-reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the anatop MFD register offset.
+
+  anatop-vol-bit-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the bit shift for the register.
+
+  anatop-vol-bit-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the number of bits used in the register.
+
+  anatop-min-bit-val:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the minimum value of this register.
+
+  anatop-min-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the minimum voltage of this regulator.
+
+  anatop-max-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the maximum voltage of this regulator.
+
+  anatop-delay-reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the anatop MFD step time register offset.
+
+  anatop-delay-bit-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the bit shift for the step time register.
+
+  anatop-delay-bit-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing the number of bits used in the step time register.
+
+  anatop-enable-bit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: u32 value representing regulator enable bit offset.
+
+  vin-supply:
+    description: input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - anatop-reg-offset
+  - anatop-vol-bit-shift
+  - anatop-vol-bit-width
+  - anatop-min-bit-val
+  - anatop-min-voltage
+  - anatop-max-voltage
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator-vddpu {
+        compatible = "fsl,anatop-regulator";
+        regulator-name = "vddpu";
+        regulator-min-microvolt = <725000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-always-on;
+        anatop-reg-offset = <0x140>;
+        anatop-vol-bit-shift = <9>;
+        anatop-vol-bit-width = <5>;
+        anatop-delay-reg-offset = <0x170>;
+        anatop-delay-bit-shift = <24>;
+        anatop-delay-bit-width = <2>;
+        anatop-min-bit-val = <1>;
+        anatop-min-voltage = <725000>;
+        anatop-max-voltage = <1300000>;
+    };
diff --git a/Documentation/devicetree/bindings/regulator/as3722-regulator.txt b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt
new file mode 100644
index 0000000000..caad0c8a25
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt
@@ -0,0 +1,91 @@
+Regulator of AMS AS3722 PMIC.
+Name of the regulator subnode must be "regulators".
+
+Optional properties:
+--------------------
+The input supply of regulators are the optional properties on the
+regulator node. The AS3722 is having 7 DCDC step-down regulators as
+sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these
+regulators are provided through following properties:
+vsup-sd2-supply: Input supply for SD2.
+vsup-sd3-supply: Input supply for SD3.
+vsup-sd4-supply: Input supply for SD4.
+vsup-sd5-supply: Input supply for SD5.
+vin-ldo0-supply: Input supply for LDO0.
+vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+vin-ldo11-supply: Input supply for LDO11.
+
+Optional nodes:
+--------------
+- regulators : Must contain a sub-node per regulator from the list below.
+	       Each sub-node should contain the constraints and initialization
+	       information for that regulator. See regulator.txt for a
+	       description of standard properties for these sub-nodes.
+	       Additional custom properties  are listed below.
+	       sd[0-6], ldo[0-7], ldo[9-11].
+
+	       Optional sub-node properties:
+	       ----------------------------
+		ams,ext-control: External control of the rail. The option of
+			this properties will tell which external input is
+			controlling this rail. Valid values are 0, 1, 2 ad 3.
+			0: There is no external control of this rail.
+			1: Rail is controlled by ENABLE1 input pin.
+			2: Rail is controlled by ENABLE2 input pin.
+			3: Rail is controlled by ENABLE3 input pin.
+		ams,enable-tracking: Enable tracking with SD1, only supported
+			by LDO3.
+
+Example:
+-------
+	ams3722: ams3722 {
+		compatible = "ams,as3722";
+		reg = <0x40>;
+		...
+
+		regulators {
+			vsup-sd2-supply = <...>;
+			...
+
+			sd0 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <2>;
+			};
+
+			sd1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <1>;
+			};
+
+			sd2 {
+				regulator-name = "vddio_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			sd4 {
+				regulator-name = "avdd-hdmi-pex";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+			};
+
+			sd5 {
+				regulator-name = "vdd-1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+			....
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
new file mode 100644
index 0000000000..c92a881ed6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW37503 Voltage Regulator
+
+maintainers:
+  - Alec Li <like@awinic.com>
+
+description:
+  The AW37503 are dual voltage regulator, designed to support positive/negative
+  supply for driving TFT-LCD panels. It support software-configurable output
+  switching and monitoring. The output voltages can be programmed via an I2C
+  compatible interface.
+
+properties:
+  compatible:
+    const: awinic,aw37503
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+required:
+  - compatible
+  - reg
+  - outp
+  - outn
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "awinic,aw37503";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
new file mode 100644
index 0000000000..36f5e2f5cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
@@ -0,0 +1,35 @@
+Motorola CPCAP PMIC voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value one of:
+    "motorola,cpcap-regulator"
+    "motorola,mapphone-cpcap-regulator"
+    "motorola,xoom-cpcap-regulator"
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-enable-ramp-delay"
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+Optional regulator properties:
+- "regulator-boot-on"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+Example:
+
+cpcap_regulator: regulator {
+	compatible = "motorola,cpcap-regulator";
+
+	cpcap_regulators: regulators {
+		sw5: SW5 {
+			regulator-min-microvolt = <5050000>;
+			regulator-max-microvolt = <5050000>;
+			regulator-enable-ramp-delay = <50000>;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
new file mode 100644
index 0000000000..58065ca9e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -0,0 +1,29 @@
+* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter
+
+Required properties:
+
+- compatible:	must be "dlg,da9210"
+- reg:		the i2c slave address of the regulator. It should be 0x68.
+
+Optional properties:
+
+- interrupts:	a reference to the DA9210 interrupt, if available.
+
+Any standard regulator properties can be used to configure the single da9210
+DCDC.
+
+Example:
+
+	da9210@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+
+		interrupt-parent = <...>;
+		interrupts = <...>;
+
+		regulator-min-microvolt = <300000>;
+		regulator-max-microvolt = <1570000>;
+		regulator-min-microamp = <1600000>;
+		regulator-max-microamp = <4600000>;
+		regulator-boot-on;
+	};
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
new file mode 100644
index 0000000000..eb871447d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -0,0 +1,205 @@
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+ Voltage Regulator
+
+Required properties:
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
+  or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
+- reg: I2C slave address, usually 0x68.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCKA and BUCKB.
+
+Optional properties:
+- enable-gpios: platform gpio for control of BUCKA/BUCKB.
+- Any optional property defined in regulator.txt
+  - regulator-initial-mode and regulator-allowed-modes may be specified using
+    mode values from dt-bindings/regulator/dlg,da9211-regulator.h
+
+Example 1) DA9211
+	pmic: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
+				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
+							   DA9211_BUCK_MODE_AUTO>;
+			};
+		};
+	};
+
+Example 2) DA9212
+	pmic: da9212@68 {
+		compatible = "dlg,da9212";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 3) DA9213
+	pmic: da9213@68 {
+		compatible = "dlg,da9213";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 4) DA9223
+	pmic: da9223@68 {
+		compatible = "dlg,da9223";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 5) DA9214
+	pmic: da9214@68 {
+		compatible = "dlg,da9214";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 6) DA9224
+	pmic: da9224@68 {
+		compatible = "dlg,da9224";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 7) DA9215
+	pmic: da9215@68 {
+		compatible = "dlg,da9215";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 8) DA9225
+	pmic: da9225@68 {
+		compatible = "dlg,da9225";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
new file mode 100644
index 0000000000..13b3f75f8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,da9121.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9121 voltage regulator
+
+maintainers:
+  - Adam Ward <Adam.Ward.opensource@diasemi.com>
+
+description: |
+  Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter
+  Dialog Semiconductor DA9122 Double-channel  5A single-phase buck converter
+  Dialog Semiconductor DA9220 Double-channel  3A single-phase buck converter
+  Dialog Semiconductor DA9217 Single-channel  6A double-phase buck converter
+  Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter
+  Dialog Semiconductor DA9131 Double-channel  5A single-phase buck converter
+  Dialog Semiconductor DA9132 Double-channel  3A single-phase buck converter
+  Dialog Semiconductor DA9141 Single-channel 40A   quad-phase buck converter
+  Dialog Semiconductor DA9142 Single-channel 20A double-phase buck converter
+
+  Device parameter ranges
+
+  The current limits can be set to at/near double the rated current per channel
+  to allow for transient peaks.
+  Current limit changes when the output is enabled are not supported, as a
+  precaution against undefined behaviour.
+
+  |----------------------------------------------|
+  |               | range & reset default value  |
+  | Device        |------------------------------|
+  |               | microvolt    | microamp      |
+  |----------------------------------------------|
+  | DA9121/DA9130 | Min:  300000 | Min:  7000000 |
+  |               | Max: 1900000 | Max: 20000000 |
+  |----------------------------------------------|
+  | DA9121/DA9131 | Min:  300000 | Min:  3500000 |
+  |               | Max: 1900000 | Max: 10000000 |
+  |----------------------------------------------|
+  | DA9121/DA9131 | Min:  300000 | Min:  3500000 |
+  |               | Max: 1900000 | Max:  6000000 |
+  |----------------------------------------------|
+  | DA9217        | Min:  300000 | Min:  7000000 |
+  |               | Max: 1900000 | Max: 12000000 |
+  |----------------------------------------------|
+  | DA9141        | Min:  300000 | Min: 26000000 |
+  |               | Max: 1300000 | Max: 78000000 |
+  |----------------------------------------------|
+  | DA9142        | Min:  300000 | Min: 13000000 |
+  |               | Max: 1300000 | Max: 39000000 |
+  |----------------------------------------------|
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - dlg,da9121
+      - dlg,da9122
+      - dlg,da9220
+      - dlg,da9217
+      - dlg,da9130
+      - dlg,da9131
+      - dlg,da9132
+      - dlg,da9141
+      - dlg,da9142
+
+  reg:
+    maxItems: 1
+    description: Specifies the I2C slave address.
+
+  interrupts:
+    maxItems: 1
+    description: IRQ line information.
+
+  dlg,irq-polling-delay-passive-ms:
+    minimum: 1000
+    maximum: 10000
+    description: |
+      Specify the polling period, measured in milliseconds, between interrupt status
+      update checks. Range 1000-10000 ms.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List of regulators provided by the device
+
+    patternProperties:
+      "^buck([1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for a single BUCK regulator
+
+        properties:
+          regulator-initial-mode:
+            enum: [ 0, 1, 2, 3 ]
+            description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+
+          enable-gpios:
+            maxItems: 1
+            description: Specify a valid GPIO for platform control of the regulator
+
+          dlg,ripple-cancel:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [ 0, 1, 2, 3 ]
+            description: |
+              Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+              Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132)
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - dlg,da9122
+                - dlg,da9131
+                - dlg,da9132
+                - dlg,da9220
+    then:
+      properties:
+        regulators:
+          properties:
+            buck2: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@68 {
+        compatible = "dlg,da9121";
+        reg = <0x68>;
+
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+        dlg,irq-polling-delay-passive-ms = <2000>;
+
+        regulators {
+          DA9121_BUCK1: buck1 {
+            regulator-name = "BUCK1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <7000000>;
+            regulator-max-microamp = <20000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@68 {
+        compatible = "dlg,da9122";
+        reg = <0x68>;
+
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+        dlg,irq-polling-delay-passive-ms = <2000>;
+
+        regulators {
+          DA9122_BUCK1: buck1 {
+            regulator-name = "BUCK1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <3500000>;
+            regulator-max-microamp = <10000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+            dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
+          };
+          DA9122_BUCK2: buck2 {
+            regulator-name = "BUCK2";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <3500000>;
+            regulator-max-microamp = <10000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+            dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
new file mode 100644
index 0000000000..bad140418e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor SLG51000 Voltage Regulator
+
+maintainers:
+  - Eric Jeong <eric.jeong.opensource@diasemi.com>
+  - Support Opensource <support.opensource@diasemi.com>
+
+properties:
+  compatible:
+    const: dlg,slg51000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dlg,cs-gpios:
+    maxItems: 1
+    description:
+      GPIO for chip select
+
+  vin3-supply:
+    description:
+      Input supply for ldo3, required if regulator is enabled
+
+  vin4-supply:
+    description:
+      Input supply for ldo4, required if regulator is enabled
+
+  vin5-supply:
+    description:
+      Input supply for ldo5, required if regulator is enabled
+
+  vin6-supply:
+    description:
+      Input supply for ldo6, required if regulator is enabled
+
+  vin7-supply:
+    description:
+      Input supply for ldo7, required if regulator is enabled
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^ldo[1-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+        required:
+          - regulator-name
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@75 {
+            compatible = "dlg,slg51000";
+            reg = <0x75>;
+            dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+            vin5-supply = <&vreg_s1f_1p2>;
+            vin6-supply = <&vreg_s1f_1p2>;
+
+            regulators {
+                ldo1 {
+                    regulator-name = "slg51000_b_ldo1";
+                    regulator-min-microvolt = <2400000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo2 {
+                    regulator-name = "slg51000_b_ldo2";
+                    regulator-min-microvolt = <2400000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo3 {
+                    regulator-name = "slg51000_b_ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+
+                ldo4 {
+                    regulator-name = "slg51000_b_ldo4";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+
+                ldo5 {
+                    regulator-name = "slg51000_b_ldo5";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo6 {
+                    regulator-name = "slg51000_b_ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo7 {
+                    regulator-name = "slg51000_b_ldo7";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
new file mode 100644
index 0000000000..69bae90fc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fcs,fan53555.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild FAN53555 regulators
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fcs,fan53555
+          - fcs,fan53526
+          - rockchip,rk8600
+          - rockchip,rk8602
+          - silergy,syr827
+          - silergy,syr828
+          - tcs,tcs4525
+      - items:
+          - const: rockchip,rk8601
+          - const: rockchip,rk8600
+      - items:
+          - const: rockchip,rk8603
+          - const: rockchip,rk8602
+
+  reg:
+    maxItems: 1
+
+  fcs,suspend-voltage-selector:
+    description: Declares which of the two available voltage selector
+      registers should be used for the suspend voltage. The other one is used
+      for the runtime voltage setting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+  vin-supply:
+    description: Supply for the vin pin
+
+  vsel-gpios:
+    description: Voltage Select. When this pin is LOW, VOUT is set by the
+      VSEL0 register. When this pin is HIGH, VOUT is set by the VSEL1 register.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@40 {
+            compatible = "fcs,fan53555";
+            reg = <0x40>;
+            regulator-name = "fan53555";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1800000>;
+            vin-supply = <&parent_reg>;
+            fcs,suspend-voltage-selector = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
new file mode 100644
index 0000000000..ac0281b1cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fixed Voltage regulators
+
+maintainers:
+  - Liam Girdwood <lgirdwood@gmail.com>
+  - Mark Brown <broonie@kernel.org>
+
+description:
+  Any property defined as part of the core regulator binding, defined in
+  regulator.yaml, can also be used. However a fixed voltage regulator is
+  expected to have the regulator-min-microvolt and regulator-max-microvolt
+  to be the same.
+
+allOf:
+  - $ref: regulator.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: regulator-fixed-clock
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: regulator-fixed-domain
+    then:
+      required:
+        - power-domains
+        - required-opps
+  - not:
+      required:
+        - gpio
+        - gpios
+
+properties:
+  compatible:
+    enum:
+      - regulator-fixed
+      - regulator-fixed-clock
+      - regulator-fixed-domain
+
+  regulator-name: true
+
+  gpio:
+    description: gpio to use for enable control
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+  clocks:
+    description:
+      clock to use for enable control. This binding is only available if
+      the compatible is chosen to regulator-fixed-clock. The clock binding
+      is mandatory if compatible is chosen to regulator-fixed-clock.
+    maxItems: 1
+
+  power-domains:
+    deprecated: true
+    description:
+      Power domain to use for enable control. This binding is only
+      available if the compatible is chosen to regulator-fixed-domain.
+    maxItems: 1
+
+  required-opps:
+    deprecated: true
+    description:
+      Performance state to use for enable control. This binding is only
+      available if the compatible is chosen to regulator-fixed-domain. The
+      power-domain binding is mandatory if compatible is chosen to
+      regulator-fixed-domain.
+    maxItems: 1
+
+  startup-delay-us:
+    description: startup time in microseconds
+
+  off-on-delay-us:
+    description: off delay time in microseconds
+
+  enable-active-high:
+    description:
+      Polarity of GPIO is Active high. If this property is missing,
+      the default assumed is Active low.
+    type: boolean
+
+  gpio-open-drain:
+    description:
+      GPIO is open drain type. If this property is missing then default
+      assumption is false.
+    type: boolean
+
+  vin-supply:
+    description: Input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reg_1v8: regulator-1v8 {
+      compatible = "regulator-fixed";
+      regulator-name = "1v8";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <1800000>;
+      gpio = <&gpio1 16 0>;
+      startup-delay-us = <70000>;
+      enable-active-high;
+      regulator-boot-on;
+      gpio-open-drain;
+      vin-supply = <&parent_reg>;
+    };
+    reg_1v8_clk: regulator-1v8-clk {
+      compatible = "regulator-fixed-clock";
+      regulator-name = "1v8";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <1800000>;
+      clocks = <&clock1>;
+      startup-delay-us = <70000>;
+      enable-active-high;
+      regulator-boot-on;
+      vin-supply = <&parent_reg>;
+    };
+    reg_1v8_domain: regulator-1v8-domain {
+      compatible = "regulator-fixed-domain";
+      regulator-name = "1v8";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <1800000>;
+      power-domains = <&domain1>;
+      required-opps = <&domain1_state1>;
+      startup-delay-us = <70000>;
+      enable-active-high;
+      regulator-boot-on;
+      vin-supply = <&parent_reg>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
new file mode 100644
index 0000000000..5a6491a81f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/google,cros-ec-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC controlled voltage regulators
+
+maintainers:
+  - Pi-Hsun Shih <pihsun@chromium.org>
+
+description:
+  Any property defined as part of the core regulator binding, defined in
+  regulator.yaml, can also be used.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: google,cros-ec-regulator
+
+  reg:
+    maxItems: 1
+    description: Identifier for the voltage regulator to ChromeOS EC.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros_ec: ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <99 0>;
+
+            regulator@0 {
+                compatible = "google,cros-ec-regulator";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <3300000>;
+                reg = <0>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
new file mode 100644
index 0000000000..f4c1f36e52
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled regulators
+
+maintainers:
+  - Liam Girdwood <lgirdwood@gmail.com>
+  - Mark Brown <broonie@kernel.org>
+
+description:
+  Any property defined as part of the core regulator binding, defined in
+  regulator.txt, can also be used.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: regulator-gpio
+
+  regulator-name: true
+
+  enable-gpios:
+    description: GPIO to use to enable/disable the regulator.
+      Warning, the GPIO phandle flags are ignored and the GPIO polarity is
+      controlled solely by the presence of "enable-active-high" DT property.
+      This is due to compatibility with old DTs.
+    maxItems: 1
+
+  gpios:
+    description: Array of one or more GPIO pins used to select the regulator
+      voltage/current listed in "states".
+    minItems: 1
+    maxItems: 8  # Should be enough...
+
+  gpios-states:
+    description: |
+      On operating systems, that don't support reading back gpio values in
+      output mode (most notably linux), this array provides the state of GPIO
+      pins set when requesting them from the gpio controller. Systems, that are
+      capable of preserving state when requesting the lines, are free to ignore
+      this property.
+        0: LOW
+        1: HIGH
+      Default is LOW if nothing else is specified.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 8
+    items:
+      enum: [0, 1]
+      default: 0
+
+  states:
+    description: Selection of available voltages/currents provided by this
+      regulator and matching GPIO configurations to achieve them. If there are
+      no states in the "states" array, use a fixed regulator instead.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 8
+    items:
+      items:
+        - description: Voltage in microvolts
+        - description: GPIO group state value
+
+  startup-delay-us:
+    description: startup time in microseconds
+
+  enable-active-high:
+    description: Polarity of "enable-gpio" GPIO is active HIGH. Default is
+      active LOW.
+    type: boolean
+
+  gpio-open-drain:
+    description:
+      GPIO is open drain type. If this property is missing then default
+      assumption is false.
+    type: boolean
+
+  regulator-type:
+    description: Specifies what is being regulated.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - voltage
+      - current
+    default: voltage
+
+  vin-supply:
+    description: Input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - gpios
+  - states
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpio-regulator {
+      compatible = "regulator-gpio";
+
+      regulator-name = "mmci-gpio-supply";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <2600000>;
+      regulator-boot-on;
+
+      enable-gpios = <&gpio0 23 0x4>;
+      gpios = <&gpio0 24 0x4
+        &gpio0 25 0x4>;
+      states = <1800000 0x3>,
+        <2200000 0x2>,
+        <2600000 0x1>,
+        <2900000 0x0>;
+
+      startup-delay-us = <100000>;
+      enable-active-high;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
new file mode 100644
index 0000000000..14cfdc5641
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
@@ -0,0 +1,29 @@
+Hisilicon Hi655x Voltage regulators
+
+Note:
+The Hi655x regulator control is managed by Hi655x PMIC.
+So the node of this regulator must be child node of Hi655x
+PMIC node.
+
+The driver uses the regulator core framework, so please also
+take the bindings of regulator.txt for reference.
+
+The valid names for regulators are:
+
+LDO2_2V8 LDO7_SDIO LDO10_2V85 LDO13_1V8 LDO14_2V8
+LDO15_1V8 LDO17_2V5 LDO19_3V0 LDO21_1V8 LDO22_1V2
+
+Example:
+        pmic: pmic@f8000000 {
+                compatible = "hisilicon,hi655x-pmic";
+		...
+		regulators {
+			ldo2: LDO2@a21 {
+				regulator-name = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+			...
+		}
+	}
diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt
new file mode 100644
index 0000000000..d6e7c9ec94
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/isl9305.txt
@@ -0,0 +1,36 @@
+Intersil ISL9305/ISL9305H voltage regulator
+
+Required properties:
+
+- compatible: "isil,isl9305" or "isil,isl9305h"
+- reg: I2C slave address, usually 0x68.
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node
+  is defined by the standard binding for regulators; see regulator.txt.
+- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1.
+  VINDCD2-supply: A phandle to a regulator node supplying VINDCD2.
+  VINLDO1-supply: A phandle to a regulator node supplying VINLDO1.
+  VINLDO2-supply: A phandle to a regulator node supplying VINLDO2.
+
+Optional properties:
+- Per-regulator optional properties are defined in regulator.txt
+
+Example
+
+	pmic: isl9305@68 {
+		compatible = "isil,isl9305";
+		reg = <0x68>;
+
+		VINDCD1-supply = <&system_power>;
+		VINDCD2-supply = <&system_power>;
+		VINLDO1-supply = <&system_power>;
+		VINLDO2-supply = <&system_power>;
+
+		regulators {
+			dcd1 {
+			        regulator-name = "VDD_DSP";
+				regulator-always-on;
+                        };
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
new file mode 100644
index 0000000000..cc5a6151d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
@@ -0,0 +1,108 @@
+TI LMU LM363x regulator device tree bindings
+
+LM363x regulator driver supports LM3631 and LM3632.
+LM3631 has five regulators and LM3632 supports three regulators.
+
+Required property:
+  - compatible: "ti,lm363x-regulator"
+
+Optional properties:
+  LM3632 has external enable pins for two LDOs.
+  - enable-gpios: Two GPIO specifiers for Vpos and Vneg control pins.
+                  The first entry is Vpos, the second is Vneg enable pin.
+
+Child nodes:
+  LM3631
+  - vboost
+  - vcont
+  - voref
+  - vpos
+  - vneg
+
+  LM3632
+  - vboost
+  - vpos
+  - vneg
+
+  Optional properties of a child node:
+  Each sub-node should contain the constraints and initialization.
+  Please refer to [1].
+
+Examples: Please refer to ti-lmu dt-bindings [2].
+
+lm3631@29 {
+	compatible = "ti,lm3631";
+	reg = <0x29>;
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6350000>;
+			regulator-always-on;
+		};
+
+		vcont {
+			regulator-name = "lcd_vcont";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		voref {
+			regulator-name = "lcd_voref";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+lm3632@11 {
+	compatible = "ti,lm3632";
+	reg = <0x11>;
+
+	regulators {
+		compatible = "ti,lm363x-regulator";
+
+		/* GPIO1_16 for Vpos, GPIO1_28 is for Vneg */
+		enable-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>,
+				<&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+		vboost {
+			regulator-name = "lcd_boost";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <6400000>;
+			regulator-always-on;
+		};
+
+		vpos {
+			regulator-name = "lcd_vpos";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+
+		vneg {
+			regulator-name = "lcd_vneg";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+		};
+	};
+};
+
+[1] ../regulator/regulator.txt
+[2] ../mfd/ti-lmu.txt
diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
new file mode 100644
index 0000000000..ab895cd1ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/lp872x.txt
@@ -0,0 +1,161 @@
+Binding for TI/National Semiconductor LP872x Driver
+
+Required properties:
+  - compatible: "ti,lp8720" or "ti,lp8725"
+  - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
+
+Optional properties:
+  - ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
+    (LP8720)
+    bit[2]: BUCK output voltage control by external DVS pin or register
+            1 = external pin, 0 = bit7 of register 08h
+    bit[1]: sleep control by external DVS pin or register
+            1 = external pin, 0 = bit6 of register 08h
+    bit[0]: time step unit(usec). 1 = 25, 0 = 50
+
+    (LP8725)
+    bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
+    bit[4]:   BUCK2 enable control. 1 = enable, 0 = disable
+    bit[3]:   BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
+    bit[2]:   BUCK1 output voltage control by external DVS pin or register
+              1 = register 08h, 0 = DVS
+    bit[1]:   LDO sleep control. 1 = sleep mode, 0 = normal
+    bit[0]:   BUCK1 enable control, 1 = enable, 0 = disable
+
+    For more details, please see the datasheet.
+
+  - ti,update-config: define it when LP872X_GENERAL_CFG register should be set
+  - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
+  - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
+  - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
+  - enable-gpios: GPIO specifier for EN pin control of LP872x devices.
+
+  Sub nodes for regulator_init_data
+    LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
+    LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
+    For more details, please see the following binding document.
+    (Documentation/devicetree/bindings/regulator/regulator.txt)
+
+Datasheet
+  - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf
+  - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf
+
+Example 1) LP8720
+
+lp8720@7d {
+	compatible = "ti,lp8720";
+	reg = <0x7d>;
+
+	/* external DVS pin used, timestep is 25usec */
+	ti,general-config = /bits/ 8 <0x03>;
+	ti,update-config;
+
+	/*
+	 * The dvs-gpio depends on the processor environment.
+	 * For example, following GPIO specifier means GPIO134 in OMAP4.
+	 */
+	ti,dvs-gpio = <&gpio5 6 0>;
+	ti,dvs-vsel = /bits/ 8 <1>;		/* SEL_V2 */
+	ti,dvs-state = /bits/ 8 <1>;		/* DVS_HIGH */
+
+	vaf: ldo1 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vmmc: ldo2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcam_io: ldo3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	vcam_core: ldo4 {
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <2850000>;
+		regulator-boot-on;
+	};
+
+	vcam: ldo5 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc: buck {
+		regulator-name = "VBUCK";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <2300000>;
+	};
+};
+
+Example 2) LP8725
+
+lp8725@7a {
+	compatible = "ti,lp8725";
+	reg = <0x7a>;
+
+	/* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
+	ti,general-config = /bits/ 8 <0xdd>;
+	ti,update-config;
+
+	vcam_io: ldo1 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcam_core: ldo2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcam: ldo3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcmmb_io: ldo4 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	vcmmb_core: ldo5 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	vaux1: lilo1 {
+		regulator-name = "VAUX1";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vaux2: lilo2 {
+		regulator-name = "VAUX2";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc1: buck1 {
+		regulator-name = "VBUCK1";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microamp  = <460000>;
+		regulator-max-microamp  = <1370000>;
+		regulator-boot-on;
+	};
+
+	vcc2: buck2 {
+		regulator-name = "VBUCK2";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microamp  = <460000>;
+		regulator-max-microamp  = <1370000>;
+		regulator-boot-on;
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/ltc3589.txt b/Documentation/devicetree/bindings/regulator/ltc3589.txt
new file mode 100644
index 0000000000..8010530361
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ltc3589.txt
@@ -0,0 +1,99 @@
+Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out,
+  ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+  documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3, ldo4):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+  values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from
+0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between
+0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1
+have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
+regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4
+regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V
+and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not
+be disabled and thus should have the regulator-always-on property set.
+
+Example:
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-1";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/ltc3676.txt b/Documentation/devicetree/bindings/regulator/ltc3676.txt
new file mode 100644
index 0000000000..d4eb366ce1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ltc3676.txt
@@ -0,0 +1,94 @@
+Linear Technology LTC3676 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3676"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4,
+  ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+  documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+  values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from:
+412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between
+0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V.
+
+Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
+0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V.  The ldo1 standby
+regulator can not be disabled and thus should have the regulator-always-on
+property set.
+
+Example:
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <200400>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <130800>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <168400>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max1586-regulator.txt b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
new file mode 100644
index 0000000000..c050c1744c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max1586-regulator.txt
@@ -0,0 +1,28 @@
+Maxim MAX1586 voltage regulator
+
+Required properties:
+- compatible: must be "maxim,max1586"
+- reg: I2C slave address, usually 0x14
+- v3-gain: integer specifying the V3 gain as per datasheet
+           (1 + R24/R25 + R24/185.5kOhm)
+- any required generic properties defined in regulator.txt
+
+Example:
+
+	i2c_master {
+		max1586@14 {
+			compatible = "maxim,max1586";
+			reg = <0x14>;
+			v3-gain = <1000000>;
+
+			regulators {
+				vcc_core: v3 {
+					regulator-name = "vcc_core";
+					regulator-compatible = "Output_V3";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1705000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
new file mode 100644
index 0000000000..27d5e9c2bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max77650-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+  This module is part of the MAX77650 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  The device has a single LDO regulator and a SIMO buck-boost regulator with
+  three independent power rails.
+
+properties:
+  compatible:
+    const: maxim,max77650-regulator
+
+patternProperties:
+  "^regulator-(ldo|sbb[0-2])$":
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml
new file mode 100644
index 0000000000..f05f4644c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8660.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8660 voltage regulator
+
+maintainers:
+  - Daniel Mack <zonque@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - maxim,max8660
+      - maxim,max8661
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^regulator-.+$":
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@34 {
+        compatible = "maxim,max8660";
+        reg = <0x34>;
+
+        regulators {
+          regulator-V3 {
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1800000>;
+          };
+
+          regulator-V4 {
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1800000>;
+          };
+
+          regulator-V5 {
+            regulator-min-microvolt = <1700000>;
+            regulator-max-microvolt = <2000000>;
+          };
+
+          regulator-V6 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <3300000>;
+          };
+
+          regulator-V7 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <3300000>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml
new file mode 100644
index 0000000000..e40ee798e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8893.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/max8893.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX8893 PMIC from Maxim Integrated.
+
+maintainers:
+  - Sergey Larin <cerg2010cerg2010@mail.ru>
+
+description: |
+  The device has 5 LDO regulators and a single BUCK regulator.
+  Programming is done through I2C bus.
+
+properties:
+  compatible:
+    const: maxim,max8893
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(ldo[1-5]|buck)$":
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmic@3e {
+                    compatible = "maxim,max8893";
+                    reg = <0x3e>;
+
+                    regulators {
+                            /* Front camera - s5k6aafx, back - m5mo */
+                            /* Numbers used to indicate the sequence */
+                            front_1_back_1: buck {
+                                    regulator-name = "cam_isp_core_1v2";
+                                    regulator-min-microvolt = <1200000>;
+                                    regulator-max-microvolt = <1200000>;
+                            };
+
+                            front_4_back_5: ldo1 {
+                                    regulator-name = "vt_io_1v8,cam_isp_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+
+                            front_3_back_4: ldo2 {
+                                    regulator-name = "vt_core_1v5";
+                                    regulator-min-microvolt = <1500000>;
+                                    regulator-max-microvolt = <1500000>;
+                            };
+
+                            front_5_back_6: ldo3 {
+                                    regulator-name = "vt_cam_1v8,vt_sensor_io_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+
+                            ldo4 {
+                                    /* not used */
+                            };
+
+                            back_7: ldo5 {
+                                    regulator-name = "cam_sensor_io_1v8";
+                                    regulator-min-microvolt = <1800000>;
+                                    regulator-max-microvolt = <1800000>;
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt
new file mode 100644
index 0000000000..371eccd1cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8907.txt
@@ -0,0 +1,69 @@
+MAX8907 regulator
+
+Required properties:
+- compatible: "maxim,max8907"
+- reg: I2C slave address
+- interrupts: The interrupt output of the controller
+- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC.
+- in-v1-supply: The input supply for SD1.
+- in-v2-supply: The input supply for SD2.
+- in-v3-supply: The input supply for SD3.
+- in1-supply: The input supply for LDO1.
+...
+- in20-supply: The input supply for LDO20.
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+
+Optional properties:
+- maxim,system-power-controller: Boolean property indicating that the PMIC
+  controls the overall system power.
+
+The valid names for regulators are:
+
+  sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10,
+  ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v,
+  out33v, bbat, sdby, vrtc.
+
+Example:
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <0 86 0x4>;
+
+			maxim,system-power-controller;
+
+			mbatt-supply = <&some_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			...
+			in1-supply = <&mbatt_reg>;
+			...
+
+			regulators {
+				mbatt_reg: mbatt {
+					regulator-name = "vbat_pmu";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+				};
+
+				sd1 {
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sd2 {
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+...
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/max8925-regulator.txt b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt
new file mode 100644
index 0000000000..0057695aae
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/max8925-regulator.txt
@@ -0,0 +1,40 @@
+Max8925 Voltage regulators
+
+Required nodes:
+-nodes:
+  - SDV1 for SDV SDV1
+  - SDV2 for SDV SDV2
+  - SDV3 for SDV SDV3
+  - LDO1 for LDO LDO1
+  - LDO2 for LDO LDO2
+  - LDO3 for LDO LDO3
+  - LDO4 for LDO LDO4
+  - LDO5 for LDO LDO5
+  - LDO6 for LDO LDO6
+  - LDO7 for LDO LDO7
+  - LDO8 for LDO LDO8
+  - LDO9 for LDO LDO9
+  - LDO10 for LDO LDO10
+  - LDO11 for LDO LDO11
+  - LDO12 for LDO LDO12
+  - LDO13 for LDO LDO13
+  - LDO14 for LDO LDO14
+  - LDO15 for LDO LDO15
+  - LDO16 for LDO LDO16
+  - LDO17 for LDO LDO17
+  - LDO18 for LDO LDO18
+  - LDO19 for LDO LDO19
+  - LDO20 for LDO LDO20
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+	SDV1 {
+		regulator-min-microvolt = <637500>;
+		regulator-max-microvolt = <1425000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
new file mode 100644
index 0000000000..285dc71229
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-regulator
+      - maxim,max77836-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microvolt: false
+      regulator-max-microvolt: false
+
+  SAFEOUT:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Safeout LDO regulator (fixed voltage).
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        const: 4900000
+      regulator-max-microvolt:
+        const: 4900000
+
+patternProperties:
+  "^LDO[12]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        minimum: 800000
+      regulator-max-microvolt:
+        maximum: 3950000
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-regulator
+    then:
+      properties:
+        LDO1: false
+        LDO2: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
new file mode 100644
index 0000000000..05f7239118
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max20086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX20086-MAX20089 Camera Power Protector
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The MAX20086-MAX20089 are dual/quad camera power protectors, designed to
+  deliver power over coax for radar and camera modules. They support
+  software-configurable output switching and monitoring. The output voltage and
+  current limit are fixed by the hardware design.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max20086
+      - maxim,max20087
+      - maxim,max20088
+      - maxim,max20089
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO connected to the EN pin, active high
+
+  in-supply:
+    description: Input supply for the camera outputs (IN pin, 3.0V to 15.0V)
+
+  vdd-supply:
+    description: Input supply for the device (VDD pin, 3.0V to 5.5V)
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^OUT[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - in-supply
+  - vdd-supply
+  - regulators
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max20088
+              - maxim,max20089
+    then:
+      properties:
+        regulators:
+          properties:
+            OUT3: false
+            OUT4: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@28 {
+            compatible = "maxim,max20087";
+            reg = <0x28>;
+
+            in-supply = <&reg_12v0>;
+            vdd-supply = <&reg_3v3>;
+
+            enable-gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+
+            regulators {
+                OUT1 {
+                    regulator-name = "VOUT1";
+                };
+                OUT2 {
+                    regulator-name = "VOUT2";
+                };
+                OUT3 {
+                    regulator-name = "VOUT3";
+                };
+                OUT4 {
+                    regulator-name = "VOUT4";
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml
new file mode 100644
index 0000000000..5b3a42d24e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max20411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX20411 Step-Down DC-DC Converter
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The MAX20411 is a high-efficiency, DC-DC step-down converter. It provides
+  configurable output voltage in the range of 0.5V to 1.275V, configurable over
+  I2C.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: maxim,max20411
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to the EN pin, active high
+
+  vdd-supply:
+    description: Input supply for the device (VDD pin, 3.0V to 5.5V)
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@39 {
+            compatible = "maxim,max20411";
+            reg = <0x39>;
+
+            enable-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
new file mode 100644
index 0000000000..0e7cd4b3ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides high-efficiency Buck and 26 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77686.yaml for
+  additional information and example.
+
+patternProperties:
+  # 26 LDOs
+  "^LDO([1-9]|1[0-9]|2[3-6])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+      Regulators which can be turned off during system suspend:
+        LDO2, LDO6-8, LDO10-12, LDO14-16
+
+    required:
+      - regulator-name
+
+  # LDO20-LDO22 with maxim,ena-gpios
+  "^LDO2[0-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single LDO regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+  # 9 bucks
+  "^BUCK[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+      Regulators which can be turned off during system suspend:
+      BUCK[1-4]
+
+    required:
+      - regulator-name
+
+  "^BUCK[89]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Properties for single BUCK regulator.
+
+    properties:
+      maxim,ena-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml
new file mode 100644
index 0000000000..945a539749
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microamp:
+        minimum: 60000
+      regulator-max-microamp:
+        maximum: 2580000
+
+    required:
+      - regulator-name
+
+patternProperties:
+  "^ESAFEOUT[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Safeout LDO regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 3300000
+      regulator-max-microvolt:
+        maximum: 4950000
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
new file mode 100644
index 0000000000..b704f05ea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC regulators
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
+  additional information and example.
+
+  Certain regulators support "regulator-initial-mode" and "regulator-mode".
+  The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
+  and their meaning is::
+    1 - Normal regulator voltage output mode.
+    3 - Low Power which reduces the quiescent current down to only 1uA
+
+  The standard "regulator-mode" property can only be used for regulators that
+  support changing their mode to Low Power Mode during suspend. These
+  regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
+  regulator has been enabled for the given suspend state using
+  "regulator-on-in-suspend" and has not been disabled for that state using
+  "regulator-off-in-suspend".
+
+patternProperties:
+  # LDO1, LDO3, LDO20, LDO21
+  "^LDO([13]|2[01])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      LDOs supporting the regulator-initial-mode property and changing their
+      mode during normal operation.
+
+  # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
+  "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      LDOs supporting the regulator-mode property (changing mode to Low Power
+      Mode during suspend).
+
+    properties:
+      regulator-initial-mode: false
+
+  # buck2-4
+  "^BUCK[2-4]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      bucks supporting the regulator-mode property (changing mode to Low Power
+      Mode during suspend).
+
+    properties:
+      regulator-initial-mode: false
+
+  # buck1, buck5-10
+  "^BUCK([15-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      regulator-initial-mode: false
+
+    patternProperties:
+      "^regulator-state-(standby|mem|disk)$":
+        type: object
+        additionalProperties: true
+        properties:
+          regulator-mode: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
new file mode 100644
index 0000000000..78c0b63243
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77826 PMIC
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - maxim,max77826
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
+
+    patternProperties:
+      "^LDO([1-9]|1[0-5])$":
+        type: object
+        $ref: regulator.yaml#
+
+      "^BUCK|BUCKBOOST$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "maxim,max77826";
+            reg = <0x69>;
+
+            regulators {
+                LDO2 {
+                    regulator-min-microvolt = <650000>;
+                    regulator-max-microvolt = <3587500>;
+                };
+            };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
new file mode 100644
index 0000000000..9695e72428
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microamp:
+        minimum: 100000
+      regulator-max-microamp:
+        maximum: 3150000
+
+    required:
+      - regulator-name
+
+patternProperties:
+  "^SAFEOUT[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Safeout LDO regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 3300000
+      regulator-max-microvolt:
+        maximum: 4950000
+
+    required:
+      - regulator-name
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
new file mode 100644
index 0000000000..3ff0d7d980
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8952.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8952 voltage regulator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: maxim,max8952
+
+  max8952,default-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      index of default DVS voltage
+
+  max8952,dvs-mode-microvolt:
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 770000
+      maximum: 1400000
+    description: |
+      Array of 4 integer values defining DVS voltages in microvolts. All values
+      must be from range <770000, 1400000>.
+
+  max8952,en-gpio:
+    maxItems: 1
+    description: |
+      GPIO used to control enable status of regulator
+
+  max8952,ramp-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description: |
+      Voltage ramp speed, values map to:
+       - 0: 32mV/us
+       - 1: 16mV/us
+       - 2: 8mV/us
+       - 3: 4mV/us
+       - 4: 2mV/us
+       - 5: 1mV/us
+       - 6: 0.5mV/us
+       - 7: 0.25mV/us
+      Defaults to 32mV/us if not specified.
+
+  max8952,sync-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    default: 0
+    description: |
+      Sync frequency, values map to:
+       - 0: 26 MHz
+       - 1: 13 MHz
+       - 2: 19.2 MHz
+      Defaults to 26 MHz if not specified.
+
+  max8952,vid-gpios:
+    minItems: 2
+    maxItems: 2
+    description: |
+      Array of two GPIO pins used for DVS voltage selection
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - max8952,dvs-mode-microvolt
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@60 {
+            compatible = "maxim,max8952";
+            reg = <0x60>;
+
+            max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+                                <&gpx0 4 GPIO_ACTIVE_HIGH>;
+            max8952,default-mode = <0>;
+            max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+                                         <1050000>, <950000>;
+            max8952,sync-freq = <0>;
+            max8952,ramp-speed = <0>;
+
+            regulator-name = "VARM_1.2V_C210";
+            regulator-min-microvolt = <770000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-always-on;
+            regulator-boot-on;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
new file mode 100644
index 0000000000..b92eef68c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8973.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8973/MAX77621 voltage regulator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max8973
+      - maxim,max77621
+
+  junction-warn-millicelsius:
+    description: |
+      Junction warning temperature threshold in millicelsius. If die
+      temperature crosses this level then device generates the warning
+      interrupts.
+      Please note that thermal functionality is only supported on MAX77621. The
+      supported threshold warning temperature for MAX77621 are 120 degC and 140
+      degC.
+
+  maxim,dvs-gpio:
+    maxItems: 1
+    description: |
+      GPIO which is connected to DVS pin of device.
+
+  maxim,dvs-default-state:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Default state of GPIO during initialisation.
+      1 for HIGH and 0 for LOW.
+
+  maxim,externally-enable:
+    type: boolean
+    description: |
+      Externally control the regulator output enable/disable.
+
+  maxim,enable-gpio:
+    maxItems: 1
+    description: |
+      GPIO for enable control. If the valid GPIO is provided then externally
+      enable control will be considered.
+
+  maxim,enable-remote-sense:
+    type: boolean
+    description: Enable remote sense.
+
+  maxim,enable-falling-slew-rate:
+    type: boolean
+    description: Enable falling slew rate.
+
+  maxim,enable-active-discharge:
+    type: boolean
+    description: Eable active discharge.
+
+  maxim,enable-frequency-shift:
+    type: boolean
+    description: Enable 9% frequency shift.
+
+  maxim,enable-bias-control:
+    type: boolean
+    description: |
+      Enable bias control which can reduce the startup delay to 20us from 220us.
+
+  maxim,enable-etr:
+    type: boolean
+    description: Enable Enhanced Transient Response.
+
+  maxim,enable-high-etr-sensitivity:
+    type: boolean
+    description: |
+      Enhanced transient response circuit is enabled and set for high
+      sensitivity. If this property is available then etr will be enable
+      default.
+      Enhanced transient response (ETR) will affect the configuration of CKADV.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@1b {
+            compatible = "maxim,max8973";
+            reg = <0x1b>;
+
+            regulator-min-microvolt = <935000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-boot-on;
+            regulator-always-on;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@1b {
+            compatible = "maxim,max77621";
+            reg = <0x1b>;
+            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+            regulator-always-on;
+            regulator-boot-on;
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <1231250>;
+            regulator-name = "PPVAR_CPU";
+            regulator-ramp-delay = <12500>;
+            maxim,dvs-default-state = <1>;
+            maxim,enable-active-discharge;
+            maxim,enable-bias-control;
+            maxim,enable-etr;
+            maxim,enable-gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+            maxim,externally-enable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
new file mode 100644
index 0000000000..2b266ea437
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
@@ -0,0 +1,446 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max8997.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX8997 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Maxim MAX8997 is a Power Management IC which includes voltage and current
+  regulators, charger controller with fuel gauge, RTC, clock outputs, haptic
+  motor driver, flash LED driver and Micro-USB Interface Controller.
+
+  The binding here is not complete and describes only regulator and charger
+  controller parts.
+
+properties:
+  compatible:
+    const: maxim,max8997-pmic
+
+  charger-supply:
+    description: |
+      Regulator node for charging current.
+
+  interrupts:
+    items:
+      - description: irq1 interrupt
+      - description: alert interrupt
+
+  max8997,pmic-buck1-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck1 when
+      changing voltage using GPIO DVS.
+      If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
+      specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
+      specify at least one voltage level (which would be a safe operating
+      voltage).
+
+  max8997,pmic-buck2-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck2 when
+      changing voltage using GPIO DVS.
+      If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
+      specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
+      specify at least one voltage level (which would be a safe operating
+      voltage).
+
+  max8997,pmic-buck5-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck5 when
+      changing voltage using GPIO DVS.
+      If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
+      specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
+      specify at least one voltage level (which would be a safe operating
+      voltage).
+
+  max8997,pmic-buck1-uses-gpio-dvs:
+    type: boolean
+    description: |
+      buck1 can be controlled by GPIO DVS.
+
+  max8997,pmic-buck2-uses-gpio-dvs:
+    type: boolean
+    description: |
+      buck2 can be controlled by GPIO DVS.
+
+  max8997,pmic-buck5-uses-gpio-dvs:
+    type: boolean
+    description: |
+      buck5 can be controlled by GPIO DVS.
+
+  max8997,pmic-buck125-default-dvs-idx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 0
+    description: |
+      Default voltage setting selected from the possible 8 options selectable
+      by the dvs gpios. The value of this property should be between 0 and 7.
+      If not specified or if out of range, the default value of this property
+      is set to 0.
+
+  max8997,pmic-buck125-dvs-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for DVS.
+
+  max8997,pmic-ignore-gpiodvs-side-effect:
+    type: boolean
+    description: |
+      When GPIO-DVS mode is used for multiple bucks, changing the voltage value
+      of one of the bucks may affect that of another buck, which is the side
+      effect of the change (set_voltage).  Use this property to ignore such
+      side effects and change the voltage.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description:
+      List of child nodes that specify the regulators.
+
+    patternProperties:
+      # 1-18 and 21 LDOs
+      "^LDO([1-9]|1[0-8]|21)$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      # 7 bucks
+      "^BUCK[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      "^EN32KHZ_[AC]P$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          32768 Hz clock output (modelled as regulator)
+
+        properties:
+          regulator-name: true
+          regulator-always-on: true
+          regulator-boot-on: true
+
+        required:
+          - regulator-name
+
+        additionalProperties: false
+
+    properties:
+      CHARGER:
+        type: object
+        $ref: regulator.yaml#
+        description: main battery charger current control
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      CHARGER_CV:
+        type: object
+        $ref: regulator.yaml#
+        description: main battery charger voltage control
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      CHARGER_TOPOFF:
+        type: object
+        $ref: regulator.yaml#
+        description: end of charge current threshold level
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      ENVICHG:
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Battery Charging Current Monitor Output. This is a fixed voltage type
+          regulator
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      ESAFEOUT1:
+        type: object
+        $ref: regulator.yaml#
+        description: LDO19
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+      ESAFEOUT2:
+        type: object
+        $ref: regulator.yaml#
+        description: LDO20
+
+        properties:
+          regulator-name: true
+
+        required:
+          - regulator-name
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - max8997,pmic-buck1-dvs-voltage
+  - max8997,pmic-buck2-dvs-voltage
+  - max8997,pmic-buck5-dvs-voltage
+  - reg
+  - regulators
+
+dependencies:
+  max8997,pmic-buck1-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
+  max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
+  max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
+
+additionalProperties: false
+
+if:
+  anyOf:
+    - required:
+        - max8997,pmic-buck1-uses-gpio-dvs
+    - required:
+        - max8997,pmic-buck2-uses-gpio-dvs
+    - required:
+        - max8997,pmic-buck5-uses-gpio-dvs
+then:
+  properties:
+    max8997,pmic-buck1-dvs-voltage:
+      minItems: 8
+      maxItems: 8
+    max8997,pmic-buck2-dvs-voltage:
+      minItems: 8
+      maxItems: 8
+    max8997,pmic-buck5-dvs-voltage:
+      minItems: 8
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max8997-pmic";
+            reg = <0x66>;
+
+            interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+                                  <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+            max8997,pmic-buck1-uses-gpio-dvs;
+            max8997,pmic-buck2-uses-gpio-dvs;
+            max8997,pmic-buck5-uses-gpio-dvs;
+
+            max8997,pmic-ignore-gpiodvs-side-effect;
+            max8997,pmic-buck125-default-dvs-idx = <0>;
+
+            max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+                                             <&gpx0 6 GPIO_ACTIVE_HIGH>,
+                                             <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+            max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+                                             <1250000>, <1200000>,
+                                             <1150000>, <1100000>,
+                                             <1000000>, <950000>;
+
+            max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+                                             <950000>,  <900000>,
+                                             <1100000>, <1000000>,
+                                             <950000>,  <900000>;
+
+            max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>;
+
+            pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+            pinctrl-names = "default";
+
+            charger-supply = <&charger_reg>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VADC_3.3V_C210";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VALIVE_1.1V_C210";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                };
+
+                BUCK1 {
+                    regulator-name = "VARM_1.2V_C210";
+                    regulator-min-microvolt = <65000>;
+                    regulator-max-microvolt = <2225000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                BUCK7 {
+                    regulator-name = "VCC_SUB_2.0V";
+                    regulator-min-microvolt = <2000000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-always-on;
+                };
+
+                ESAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-boot-on;
+                };
+
+                EN32KHZ_AP {
+                    regulator-name = "EN32KHZ_AP";
+                    regulator-always-on;
+                };
+
+                EN32KHZ_CP {
+                    regulator-name = "EN32KHZ_CP";
+                    regulator-always-on;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <200000>;
+                    regulator-max-microamp = <950000>;
+                };
+
+                CHARGER_CV {
+                    regulator-name = "CHARGER_CV";
+                    regulator-min-microvolt = <4200000>;
+                    regulator-max-microvolt = <4200000>;
+                    regulator-always-on;
+                };
+
+                CHARGER_TOPOFF {
+                    regulator-name = "CHARGER_TOPOFF";
+                    regulator-min-microamp = <200000>;
+                    regulator-max-microamp = <200000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max8997-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>,
+                         <3 IRQ_TYPE_EDGE_FALLING>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max8997_irq>;
+
+            max8997,pmic-buck1-dvs-voltage = <1350000>;
+            max8997,pmic-buck2-dvs-voltage = <1100000>;
+            max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ABB_3.3V";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_ARM_1.2V";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                // ...
+
+                EN32KHZ_AP {
+                    regulator-name = "EN32KHZ_AP";
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
new file mode 100644
index 0000000000..451cc4e86b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
@@ -0,0 +1,144 @@
+MCP16502 PMIC
+
+Required properties:
+- compatible: "microchip,mcp16502"
+- reg: I2C slave address
+- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
+	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
+	     property is optional;
+- regulators: A node that houses a sub-node for each regulator within
+              the device. Each sub-node is identified using the node's
+              name. The content of each sub-node is defined by the
+              standard binding for regulators; see regulator.txt.
+
+Regulators of MCP16502 PMIC:
+1) VDD_IO	- Buck (1.2 - 3.7 V)
+2) VDD_DDR	- Buck (0.6 - 1.85 V)
+3) VDD_CORE	- Buck (0.6 - 1.85 V)
+4) VDD_OTHER	- BUCK (0.6 - 1.85 V)
+5) LDO1		- LDO  (1.2 - 3.7 V)
+6) LDO2		- LDO  (1.2 - 3.7 V)
+
+Regulator modes:
+2 - FPWM: higher precision, higher consumption
+4 - AutoPFM: lower precision, lower consumption
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+mcp16502@5b {
+	compatible = "microchip,mcp16502";
+	reg = <0x5b>;
+	status = "okay";
+	lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		VDD_IO {
+			regulator-name = "VDD_IO";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3700000>;
+			regulator-initial-mode = <2>;
+			regulator-allowed-modes = <2>, <4>;
+			regulator-always-on;
+
+			regulator-state-standby {
+				regulator-on-in-suspend;
+				regulator-mode = <4>;
+			};
+
+			regulator-state-mem {
+				regulator-off-in-suspend;
+				regulator-mode = <4>;
+			};
+		};
+
+		VDD_DDR {
+			regulator-name = "VDD_DDR";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1850000>;
+			regulator-initial-mode = <2>;
+			regulator-allowed-modes = <2>, <4>;
+			regulator-always-on;
+
+			regulator-state-standby {
+				regulator-on-in-suspend;
+				regulator-mode = <4>;
+			};
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-mode = <4>;
+			};
+		};
+
+		VDD_CORE {
+			regulator-name = "VDD_CORE";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1850000>;
+			regulator-initial-mode = <2>;
+			regulator-allowed-modes = <2>, <4>;
+			regulator-always-on;
+
+			regulator-state-standby {
+				regulator-on-in-suspend;
+				regulator-mode = <4>;
+			};
+
+			regulator-state-mem {
+				regulator-off-in-suspend;
+				regulator-mode = <4>;
+			};
+		};
+
+		VDD_OTHER {
+			regulator-name = "VDD_OTHER";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1850000>;
+			regulator-initial-mode = <2>;
+			regulator-allowed-modes = <2>, <4>;
+			regulator-always-on;
+
+			regulator-state-standby {
+				regulator-on-in-suspend;
+				regulator-mode = <4>;
+			};
+
+			regulator-state-mem {
+				regulator-off-in-suspend;
+				regulator-mode = <4>;
+			};
+		};
+
+		LDO1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3700000>;
+			regulator-always-on;
+
+			regulator-state-standby {
+				regulator-on-in-suspend;
+			};
+
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+		LDO2 {
+			regulator-name = "LDO2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3700000>;
+			regulator-always-on;
+
+			regulator-state-standby {
+				regulator-on-in-suspend;
+			};
+
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
new file mode 100644
index 0000000000..79e5198e1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6331-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6331 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6331 PMIC provides 6 BUCK and 21 LDO (Low Dropout) regulators
+  and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6331 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(avdd32aud|auxa32)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(avdd32aud|auxa32)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vcam(a|af|d|io)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^vcam(a|af|d|io)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vtcxo[12]$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^vtcxo[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+  "^ldo-vgp[1234]$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^vgp[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6331_vdvfs11_reg: buck-vdvfs11 {
+          regulator-name = "vdvfs11";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs12_reg: buck-vdvfs12 {
+          regulator-name = "vdvfs12";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs13_reg: buck-vdvfs13 {
+          regulator-name = "vdvfs13";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs14_reg: buck-vdvfs14 {
+          regulator-name = "vdvfs14";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vcore2_reg: buck-vcore2 {
+          regulator-name = "vcore2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vio18_reg: buck-vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vtcxo1_reg: ldo-vtcxo1 {
+          regulator-name = "vtcxo1";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vtcxo2_reg: ldo-vtcxo2 {
+          regulator-name = "vtcxo2";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_avdd32_aud_reg: ldo-avdd32aud {
+          regulator-name = "avdd32_aud";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vauxa32_reg: ldo-vauxa32 {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vio28_reg: ldo-vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vcamaf_reg: ldo-vcamaf {
+          regulator-name = "vcam_af";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vemc33_reg: ldo-vemc33 {
+          regulator-name = "vemc33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp1_reg: ldo-vgp1 {
+          regulator-name = "vgp1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vmipi_reg: ldo-vmipi {
+          regulator-name = "vmipi";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp4_reg: ldo-vgp4 {
+          regulator-name = "vgp4";
+          regulator-min-microvolt = <1600000>;
+          regulator-max-microvolt = <2200000>;
+        };
+        mt6331_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1500000>;
+        };
+        mt6331_vusb10_reg: ldo-vusb10 {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-boot-on;
+        };
+        mt6331_vcamio_reg: ldo-vcamio {
+          regulator-name = "vcam_io";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vsram_reg: ldo-vsram {
+          regulator-name = "vsram";
+          regulator-min-microvolt = <1012500>;
+          regulator-max-microvolt = <1012500>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vgp2_reg: ldo-vgp2 {
+          regulator-name = "vgp2";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1500000>;
+          regulator-boot-on;
+        };
+        mt6331_vgp3_reg: ldo-vgp3 {
+          regulator-name = "vgp3";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vrtc_reg: ldo-vrtc {
+          regulator-name = "vrtc";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vdig18_reg: ldo-vdig18 {
+          regulator-name = "dvdd18_dig";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
new file mode 100644
index 0000000000..2eb512c29a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6332-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6332 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6332 Companion PMIC provides 6 BUCK and 4 LDO (Low Dropout)
+  regulators and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6332 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(bif28|dig18|sram|usb33)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(bif28|dig18|sram|usb33)$"
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6332_vdram_reg: buck-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-allowed-modes = <0 1>;
+          regulator-always-on;
+        };
+        mt6332_vdvfs2_reg: buck-vdvfs2 {
+          regulator-name = "vdvfs2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3400000>;
+        };
+        mt6332_vrf18a_reg: buck-vrf18a {
+          regulator-name = "vrf18a";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vrf18b_reg: buck-vrf18b {
+          regulator-name = "vrf18b";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vsbst_reg: buck-vsbst {
+          regulator-name = "vsbst";
+          regulator-min-microvolt = <3500000>;
+          regulator-max-microvolt = <7468750>;
+        };
+        mt6332_vauxb32_reg: ldo-vauxb32 {
+          regulator-name = "vauxb32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6332_vbif28_reg: ldo-vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+        };
+        mt6332_vdig18_reg: ldo-vdig18 {
+          regulator-name = "vdig18";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-always-on;
+        };
+        mt6332_vsram_reg: ldo-vsram {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-always-on;
+        };
+        mt6332_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
new file mode 100644
index 0000000000..6327bb2f6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6357-regulator.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6357-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 Regulators
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+  - Fabien Parent <fabien.parent@linaro.org>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+  The MT6357 PMIC provides 5 BUCK and 29 LDO.
+  Regulators and nodes are named according to the regulator type:
+  - buck-<name>
+  - ldo-<name>.
+  MT6357 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core|modem|pa|proc|s1)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(camio18|aud28|aux18|io18|io28|rf12|rf18|cn18|cn28|fe28)$":
+    type: object
+    $ref: fixed-regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single fixed LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(efuse|ibr|ldo28|mch|cama|camd|cn33-bt|cn33-wifi)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+  "^ldo-v(xo22|emc|mc|sim1|sim2|sram-others|sram-proc|dram|usb33)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6357_vproc_reg: buck-vproc {
+          regulator-name = "vproc";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vcore_reg: buck-vcore {
+          regulator-name = "vcore";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vmodem_reg: buck-vmodem {
+          regulator-name = "vmodem";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <220>;
+        };
+        mt6357_vs1_reg: buck-vs1 {
+          regulator-name = "vs1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <220>;
+          regulator-always-on;
+        };
+        mt6357_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3650000>;
+          regulator-ramp-delay = <50000>;
+          regulator-enable-ramp-delay = <220>;
+        };
+        mt6357_vfe28_reg: ldo-vfe28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vxo22_reg: ldo-vxo22 {
+          regulator-name = "vxo22";
+          regulator-min-microvolt = <2200000>;
+          regulator-max-microvolt = <2400000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vrf18_reg: ldo-vrf18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vrf18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vrf12_reg: ldo-vrf12 {
+          compatible = "regulator-fixed";
+          regulator-name = "vrf12";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1200000>;
+          regulator-enable-ramp-delay = <110>;
+        };
+        mt6357_vefuse_reg: ldo-vefuse {
+          regulator-name = "vefuse";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+          regulator-name = "vcn33-bt";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3500000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+          regulator-name = "vcn33-wifi";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3500000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn28_reg: ldo-vcn28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcn28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcn18_reg: ldo-vcn18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vcamio_reg: ldo-vcamio18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vldo28_reg: ldo-vldo28 {
+          regulator-name = "vldo28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vsram_others_reg: ldo-vsram-others {
+          regulator-name = "vsram-others";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <110>;
+          regulator-always-on;
+        };
+        mt6357_vsram_proc_reg: ldo-vsram-proc {
+          regulator-name = "vsram-proc";
+          regulator-min-microvolt = <518750>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <6250>;
+          regulator-enable-ramp-delay = <110>;
+          regulator-always-on;
+        };
+        mt6357_vaux18_reg: ldo-vaux18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vaux18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vaud28_reg: ldo-vaud28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vaud28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vio28_reg: ldo-vio28 {
+          compatible = "regulator-fixed";
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vio18_reg: ldo-vio18 {
+          compatible = "regulator-fixed";
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <264>;
+          regulator-always-on;
+        };
+        mt6357_vdram_reg: ldo-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1200000>;
+          regulator-enable-ramp-delay = <3300>;
+        };
+        mt6357_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vemc_reg: ldo-vemc {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+          regulator-always-on;
+        };
+        mt6357_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+        mt6357_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-enable-ramp-delay = <44>;
+        };
+        mt6357_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3100000>;
+          regulator-enable-ramp-delay = <264>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mp8859.txt b/Documentation/devicetree/bindings/regulator/mp8859.txt
new file mode 100644
index 0000000000..74ad697309
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mp8859.txt
@@ -0,0 +1,22 @@
+Monolithic Power Systems MP8859 voltage regulator
+
+Required properties:
+- compatible: "mps,mp8859";
+- reg: I2C slave address.
+
+Optional subnode for regulator: "mp8859_dcdc", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
new file mode 100644
index 0000000000..0221397eb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp5416.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MP5416 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^pmic@[0-9a-f]{1,2}$"
+  compatible:
+    enum:
+      - mps,mp5416
+      - mps,mp5496
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4] and LDO[1-4]
+
+    patternProperties:
+      "^buck[1-4]$":
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        type: object
+
+      "^ldo[1-4]$":
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        type: object
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mp5416";
+          reg = <0x69>;
+
+          regulators {
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <600000>;
+             regulator-max-microvolt = <2187500>;
+             regulator-min-microamp  = <3800000>;
+             regulator-max-microamp  = <6800000>;
+             regulator-boot-on;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <800000>;
+             regulator-max-microvolt = <3975000>;
+            };
+         };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
new file mode 100644
index 0000000000..374a4f6b1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mp886x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems MP8867/MP8869 voltage regulator
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mps,mp8867
+      - mps,mp8869
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  mps,fb-voltage-divider:
+    description: An array of two integers containing the resistor
+      values R1 and R2 of the feedback voltage divider in kilo ohms.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+
+  mps,switch-frequency-hz:
+    description: The valid switch frequency in Hertz.
+    enum: [500000, 750000, 1000000, 1250000, 1500000]
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mps,fb-voltage-divider
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@62 {
+          compatible = "mps,mp8869";
+          regulator-name = "vcpu";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>;
+          mps,fb-voltage-divider = <80 240>;
+          reg = <0x62>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
new file mode 100644
index 0000000000..6de5b027f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MPQ7920 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - mps,mpq7920
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
+
+    properties:
+      mps,switch-freq:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        enum: [0, 1, 2, 3]
+        default: 2
+        description: |
+          switching frequency must be one of following corresponding value
+          1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
+
+      ldortc:
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+      "^buck[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+        properties:
+          mps,buck-softstart:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            enum: [0, 1, 2, 3]
+            description: |
+              defines the soft start time of this buck, must be one of the following
+              corresponding values 150us, 300us, 610us, 920us
+
+          mps,buck-phase-delay:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            enum: [0, 1, 2, 3]
+            description: |
+              defines the phase delay of this buck, must be one of the following
+              corresponding values 0deg, 90deg, 180deg, 270deg
+
+          mps,buck-ovp-disable:
+            type: boolean
+            description: |
+              disables over voltage protection of this buck
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mpq7920";
+          reg = <0x69>;
+
+          regulators {
+            mps,switch-freq = /bits/ 8 <1>;
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <400000>;
+             regulator-max-microvolt = <3587500>;
+             regulator-min-microamp  = <460000>;
+             regulator-max-microamp  = <7600000>;
+             regulator-boot-on;
+             mps,buck-ovp-disable;
+             mps,buck-phase-delay = /bits/ 8 <2>;
+             mps,buck-softstart = /bits/ 8 <1>;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <650000>;
+             regulator-max-microvolt = <3587500>;
+            };
+         };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml
new file mode 100644
index 0000000000..2185cd011c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7932.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mpq7932.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MPQ7932 PMIC
+
+maintainers:
+  - Saravanan Sekar <saravanan@linumiz.com>
+
+properties:
+  compatible:
+    enum:
+      - mps,mpq7932
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-6]
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@3 {
+            compatible = "mps,mpq7932";
+            reg = <0x3>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                };
+
+                buck2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <1700000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
new file mode 100644
index 0000000000..84d544d8c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
@@ -0,0 +1,35 @@
+Mediatek MT6311 Regulator
+
+Required properties:
+- compatible: "mediatek,mt6311-regulator"
+- reg: I2C slave address, usually 0x6b.
+- regulators: List of regulators provided by this controller. It is named
+  to VDVFS and VBIASN.
+  The definition for each of these nodes is defined using the standard binding
+  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+  VDVFS
+LDO:
+  VBIASN
+
+Example:
+	mt6311: pmic@6b {
+		compatible = "mediatek,mt6311-regulator";
+		reg = <0x6b>;
+
+		regulators {
+			mt6311_vcpu_reg: VDVFS {
+				regulator-name = "VDVFS";
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <10000>;
+			};
+			mt6311_ldo_reg: VBIASN {
+				regulator-name = "VBIASN";
+				regulator-min-microvolt = <200000>;
+				regulator-max-microvolt = <800000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
new file mode 100644
index 0000000000..6317daf76d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6315 Regulator
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  The MT6315 is a power management IC (PMIC) configurable with SPMI.
+  that contains 4 BUCKs output which can combine with each other
+  by different efuse settings.
+
+properties:
+  compatible:
+    const: mediatek,mt6315-regulator
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators and its properties
+
+    patternProperties:
+      "^vbuck[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-compatible:
+            pattern: "^vbuck[1-4]$"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic@6 {
+      compatible = "mediatek,mt6315-regulator";
+      reg = <0x6 0>;
+
+      regulators {
+        vbuck1 {
+          regulator-compatible = "vbuck1";
+          regulator-min-microvolt = <300000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <256>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+
+        vbuck3 {
+          regulator-compatible = "vbuck3";
+          regulator-min-microvolt = <300000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <256>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 0000000000..a48749db4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,237 @@
+Mediatek MT6323 Regulator
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vproc, buck_vsys, buck_vpa
+LDO:
+  ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+  ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+  ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+  ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+	pmic: mt6323 {
+		mt6323regulator: regulators {
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
new file mode 100644
index 0000000000..b6384306db
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -0,0 +1,350 @@
+MediaTek MT6358 Regulator
+
+All voltage regulators provided by the MT6358 PMIC are described as the
+subnodes of the MT6358 regulators node. Each regulator is named according
+to its regulator type, buck_<name> and ldo_<name>. The definition for each
+of these nodes is defined using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+  buck_vs2, buck_vmodem, buck_vs1
+LDO:
+  ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
+  ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
+  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+  ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
+
+Example:
+
+	pmic {
+		compatible = "mediatek,mt6358";
+
+		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
+			mt6358_vdram1_reg: buck_vdram1 {
+				regulator-compatible = "buck_vdram1";
+				regulator-name = "vdram1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			mt6358_vpa_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			mt6358_vproc11_reg: buck_vproc11 {
+				regulator-name = "vproc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			mt6358_vproc12_reg: buck_vproc12 {
+				regulator-name = "vproc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			mt6358_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+			};
+
+			mt6358_vs2_reg: buck_vs2 {
+				regulator-name = "vs2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vmodem_reg: buck_vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <900>;
+				regulator-always-on;
+			};
+
+			mt6358_vs1_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2587500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vdram2_reg: ldo_vdram2 {
+				regulator-name = "vdram2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6358_vsim1_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6358_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vrf12_reg: ldo_vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vio18_reg: ldo_vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6358_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vcamio_reg: ldo_vcamio {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcamd_reg: ldo_vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcn18_reg: ldo_vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vfe28_reg: ldo_vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
+				regulator-name = "vsram_proc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcn28_reg: ldo_vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_others_reg: ldo_vsram_others {
+				regulator-name = "vsram_others";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vsram_gpu_reg: ldo_vsram_gpu {
+				regulator-name = "vsram_gpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6358_vxo22_reg: ldo_vxo22 {
+				compatible = "regulator-fixed";
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+				regulator-always-on;
+			};
+
+			mt6358_vefuse_reg: ldo_vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaux18_reg: ldo_vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vbif28_reg: ldo_vbif28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
+				regulator-name = "vsram_proc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcama1_reg: ldo_vcama1 {
+				regulator-name = "vcama1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vemc_reg: ldo_vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+				regulator-always-on;
+			};
+
+			mt6358_vio28_reg: ldo_vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_va12_reg: ldo_va12 {
+				compatible = "regulator-fixed";
+				regulator-name = "va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vrf18_reg: ldo_vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcama2_reg: ldo_vcama2 {
+				regulator-name = "vcama2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vldo28_reg: ldo_vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaud28_reg: ldo_vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsim2_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
new file mode 100644
index 0000000000..d6b3b5a5c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -0,0 +1,385 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6359-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6359 Regulator from MediaTek Integrated
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  MT6359 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(ibr|rf12|usb|camio|efuse|xo22)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(rfck|emc|a12|a09|ufs|bbck)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^vsram_(proc2|others|md|proc1|others_sshub)$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(fe|bif|io)28$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(fe|bif|io)28$"
+
+    unevaluatedProperties: false
+
+  "^ldo_v(aud|io|aux|rf|m)18$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^v(aud|io|aux|rf|m)18$"
+
+    unevaluatedProperties: false
+
+  "^ldo_vsim[12]$":
+    type: object
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^vsim[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6359_vs1_buck_reg: buck_vs1 {
+          regulator-name = "vs1";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-always-on;
+        };
+        mt6359_vgpu11_buck_reg: buck_vgpu11 {
+          regulator-name = "vgpu11";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vmodem_buck_reg: buck_vmodem {
+          regulator-name = "vmodem";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1100000>;
+          regulator-ramp-delay = <10760>;
+          regulator-enable-ramp-delay = <200>;
+        };
+        mt6359_vpu_buck_reg: buck_vpu {
+          regulator-name = "vpu";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vcore_buck_reg: buck_vcore {
+          regulator-name = "vcore";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vs2_buck_reg: buck_vs2 {
+          regulator-name = "vs2";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1600000>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-always-on;
+        };
+        mt6359_vpa_buck_reg: buck_vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3650000>;
+          regulator-enable-ramp-delay = <300>;
+        };
+        mt6359_vproc2_buck_reg: buck_vproc2 {
+          regulator-name = "vproc2";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vproc1_buck_reg: buck_vproc1 {
+          regulator-name = "vproc1";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <200>;
+          regulator-allowed-modes = <0 1 2>;
+        };
+        mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
+          regulator-name = "vcore_sshub";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+        };
+        mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
+          regulator-name = "vgpu11_sshub";
+          regulator-min-microvolt = <400000>;
+          regulator-max-microvolt = <1193750>;
+        };
+        mt6359_vaud18_ldo_reg: ldo_vaud18 {
+          regulator-name = "vaud18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vsim1_ldo_reg: ldo_vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6359_vibr_ldo_reg: ldo_vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vrf12_ldo_reg: ldo_vrf12 {
+          regulator-name = "vrf12";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1300000>;
+        };
+        mt6359_vusb_ldo_reg: ldo_vusb {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-enable-ramp-delay = <960>;
+          regulator-always-on;
+        };
+        mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+          regulator-name = "vsram_proc2";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vio18_ldo_reg: ldo_vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-enable-ramp-delay = <960>;
+          regulator-always-on;
+        };
+        mt6359_vcamio_ldo_reg: ldo_vcamio {
+          regulator-name = "vcamio";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+        mt6359_vcn18_ldo_reg: ldo_vcn18 {
+          regulator-name = "vcn18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vfe28_ldo_reg: ldo_vfe28 {
+          regulator-name = "vfe28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <120>;
+        };
+        mt6359_vcn13_ldo_reg: ldo_vcn13 {
+          regulator-name = "vcn13";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1300000>;
+        };
+        mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
+          regulator-name = "vcn33_1_bt";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
+          regulator-name = "vcn33_1_wifi";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vaux18_ldo_reg: ldo_vaux18 {
+          regulator-name = "vaux18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vsram_others_ldo_reg: ldo_vsram_others {
+          regulator-name = "vsram_others";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <5000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vefuse_ldo_reg: ldo_vefuse {
+          regulator-name = "vefuse";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <2000000>;
+        };
+        mt6359_vxo22_ldo_reg: ldo_vxo22 {
+          regulator-name = "vxo22";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <2200000>;
+          regulator-always-on;
+        };
+        mt6359_vrfck_ldo_reg: ldo_vrfck {
+          regulator-name = "vrfck";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <1700000>;
+        };
+        mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
+          regulator-name = "vrfck";
+          regulator-min-microvolt = <1240000>;
+          regulator-max-microvolt = <1600000>;
+        };
+        mt6359_vbif28_ldo_reg: ldo_vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vio28_ldo_reg: ldo_vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-always-on;
+        };
+        mt6359_vemc_ldo_reg: ldo_vemc {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2900000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
+          regulator-name = "vemc";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
+          regulator-name = "vcn33_2_bt";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
+          regulator-name = "vcn33_2_wifi";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3500000>;
+        };
+        mt6359_va12_ldo_reg: ldo_va12 {
+          regulator-name = "va12";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-always-on;
+        };
+        mt6359_va09_ldo_reg: ldo_va09 {
+          regulator-name = "va09";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1200000>;
+        };
+        mt6359_vrf18_ldo_reg: ldo_vrf18 {
+          regulator-name = "vrf18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1810000>;
+        };
+        mt6359_vsram_md_ldo_reg: ldo_vsram_md {
+          regulator-name = "vsram_md";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <10760>;
+          regulator-enable-ramp-delay = <240>;
+        };
+        mt6359_vufs_ldo_reg: ldo_vufs {
+          regulator-name = "vufs";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+        };
+        mt6359_vm18_ldo_reg: ldo_vm18 {
+          regulator-name = "vm18";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-always-on;
+        };
+        mt6359_vbbck_ldo_reg: ldo_vbbck {
+          regulator-name = "vbbck";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1200000>;
+        };
+        mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
+          regulator-name = "vsram_proc1";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+          regulator-ramp-delay = <7500>;
+          regulator-enable-ramp-delay = <240>;
+          regulator-always-on;
+        };
+        mt6359_vsim2_ldo_reg: ldo_vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
+          regulator-name = "vsram_others_sshub";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <1293750>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
new file mode 100644
index 0000000000..9c879bc3c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 Regulator from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  list of regulators provided by this controller, must be named
+  after their hardware counterparts buck1/2 or ldo1/2/3/5/6/7
+
+properties:
+  compatible:
+    const: mediatek,mt6360-regulator
+
+  LDO_VIN1-supply:
+    description: Input supply phandle(s) for LDO1/2/3
+  LDO_VIN2-supply:
+    description: Input supply phandle(s) for LDO5
+  LDO_VIN3-supply:
+    description: Input supply phandle(s) for LDO6/7
+
+patternProperties:
+  "^buck[12]$":
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+  "^ldo[123567]$":
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    regulator {
+      compatible = "mediatek,mt6360-regulator";
+      LDO_VIN3-supply = <&BUCK2>;
+      buck1 {
+        regulator-name = "mt6360,buck1";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      BUCK2: buck2 {
+        regulator-name = "mt6360,buck2";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP
+             MT6360_OPMODE_ULP>;
+      };
+      ldo6 {
+        regulator-name = "mt6360,ldo6";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo7 {
+        regulator-name = "mt6360,ldo7";
+        regulator-min-microvolt = <500000>;
+        regulator-max-microvolt = <2100000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo1 {
+        regulator-name = "mt6360,ldo1";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo2 {
+        regulator-name = "mt6360,ldo2";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo3 {
+        regulator-name = "mt6360,ldo3";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+      ldo5 {
+        regulator-name = "mt6360,ldo5";
+        regulator-min-microvolt = <2700000>;
+        regulator-max-microvolt = <3600000>;
+        regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+             MT6360_OPMODE_LP>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
new file mode 100644
index 0000000000..0058441f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
@@ -0,0 +1,89 @@
+MediaTek MT6380 Regulator
+
+All voltage regulators provided by the MT6380 PMIC are described as the
+subnodes of the MT6380 regulators node. Each regulator is named according
+to its regulator type, buck-<name> and ldo-<name>. The definition for each
+of these nodes is defined using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+  buck-core1, buck-vcore, buck-vrf
+LDO:
+  ldo-vm ,ldo-va , ldo-vphy, ldo-vddr, ldo-vt
+
+Example:
+
+	regulators {
+		compatible = "mediatek,mt6380-regulator";
+
+		mt6380_vcpu_reg: buck-vcore1 {
+			regulator-name = "vcore1";
+			regulator-min-microvolt = < 600000>;
+			regulator-max-microvolt = <1393750>;
+			regulator-ramp-delay = <6250>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vcore_reg: buck-vcore {
+			regulator-name = "vcore";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1393750>;
+			regulator-ramp-delay = <6250>;
+		};
+
+		mt6380_vrf_reg: buck-vrf {
+			regulator-name = "vrf";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1575000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vm_reg: ldo-vm {
+			regulator-name = "vm";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_va_reg: ldo-va {
+			regulator-name = "va";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vphy_reg: ldo-vphy {
+			regulator-name = "vphy";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vddr_reg: ldo-vddr {
+			regulator-name = "vddr";
+			regulator-min-microvolt = <1240000>;
+			regulator-max-microvolt = <1840000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vt_reg: ldo-vt {
+			regulator-name = "vt";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
new file mode 100644
index 0000000000..c080086d3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
@@ -0,0 +1,220 @@
+Mediatek MT6397 Regulator
+
+Required properties:
+- compatible: "mediatek,mt6397-regulator"
+- mt6397regulator: List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  The definition for each of these nodes is defined using the standard binding
+  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu,
+  buck_vdrm, buck_vio18
+LDO:
+  ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch,
+  ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
+  ldo_vibr
+
+BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
+values specified in dt-bindings/regulator/mediatek,mt6397-regulator.h
+
+Example:
+	pmic {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <200>;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2120000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				/* fixed output 2.8 V */
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				/* fixed output 2.8 V */
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_usb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+				/* fixed output 3.3 V */
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				egulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt
new file mode 100644
index 0000000000..4bf2dbf7c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nvidia,tegra-regulators-coupling.txt
@@ -0,0 +1,65 @@
+NVIDIA Tegra Regulators Coupling
+================================
+
+NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators.
+Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30
+there are 2.
+
+Tegra20 voltage coupling
+------------------------
+
+On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU.
+The CORE and RTC voltages shall be in a range of 170mV from each other
+and they both shall be higher than the CPU voltage by at least 120mV.
+
+Tegra30 voltage coupling
+------------------------
+
+On Tegra30 SoC's there are 2 coupled regulators: CORE and CPU. The CORE
+and CPU voltages shall be in a range of 300mV from each other and CORE
+voltage shall be higher than the CPU by N mV, where N depends on the CPU
+voltage.
+
+Required properties:
+- nvidia,tegra-core-regulator: Boolean property that designates regulator
+  as the "Core domain" voltage regulator.
+- nvidia,tegra-rtc-regulator: Boolean property that designates regulator
+  as the "RTC domain" voltage regulator.
+- nvidia,tegra-cpu-regulator: Boolean property that designates regulator
+  as the "CPU domain" voltage regulator.
+
+Example:
+
+	pmic {
+		regulators {
+			core_vdd_reg: core {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>;
+				regulator-coupled-max-spread = <170000 550000>;
+
+				nvidia,tegra-core-regulator;
+			};
+
+			rtc_vdd_reg: rtc {
+				regulator-name = "vdd_rtc";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>;
+				regulator-coupled-max-spread = <170000 550000>;
+
+				nvidia,tegra-rtc-regulator;
+			};
+
+			cpu_vdd_reg: cpu {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1125000>;
+				regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>;
+				regulator-coupled-max-spread = <550000 550000>;
+
+				nvidia,tegra-cpu-regulator;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
new file mode 100644
index 0000000000..3d469b8e97
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+description: |
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at
+  https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf
+
+# The valid names for PCA9450 regulator nodes are:
+# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
+# LDO1, LDO2, LDO3, LDO4, LDO5
+# Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9450a
+      - nxp,pca9450b
+      - nxp,pca9450c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^LDO[1-5]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^BUCK[1-6]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          nxp,dvs-run-voltage:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 600000
+            maximum: 2187500
+            description:
+              PMIC default "RUN" state voltage in uV. Only Buck1~3 have such
+              dvs(dynamic voltage scaling) property.
+
+          nxp,dvs-standby-voltage:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 600000
+            maximum: 2187500
+            description:
+              PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
+              dvs(dynamic voltage scaling) property.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  sd-vsel-gpios:
+    description: GPIO that is used to switch LDO5 between being configured by
+      LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
+      connected to a host GPIO.
+
+  nxp,i2c-lt-enable:
+    type: boolean
+    description:
+      Indicates that the I2C Level Translator is used.
+
+  nxp,wdog_b-warm-reset:
+    type: boolean
+    description:
+      When WDOG_B signal is asserted a warm reset will be done instead of cold
+      reset.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@25 {
+            compatible = "nxp,pca9450b";
+            reg = <0x25>;
+            pinctrl-0 = <&pinctrl_pmic>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "BUCK1";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <2187500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <3125>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "BUCK2";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <2187500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <3125>;
+                    nxp,dvs-run-voltage = <950000>;
+                    nxp,dvs-standby-voltage = <850000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "BUCK4";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "BUCK5";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "BUCK6";
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "LDO3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "LDO4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "LDO5";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
new file mode 100644
index 0000000000..894bdbca78
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PF8100/PF8121A/PF8200 PMIC regulators
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Troy Kisky <troy.kisky@boundarydevices.com>
+
+description: |
+  PF8100/PF8121A/PF8200 is a PMIC designed for highperformance consumer
+  applications. It features seven high efficiency buck converters, four
+  linear and one vsnvs regulators. It has built-in one time programmable
+  fuse bank for device configurations.
+
+properties:
+  compatible:
+    enum:
+      - nxp,pf8100
+      - nxp,pf8121a
+      - nxp,pf8200
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^buck[1-7]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        properties:
+          nxp,ilim-ma:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 2100
+            maximum: 4500
+            deprecated: true
+            description:
+              BUCK regulators current limit in mA.
+              This property is deprecated, please use
+              "regulator-max-microamp" instead.
+
+              Listed current limits in mA are,
+              2100 (default)
+              2600
+              3000
+              4500
+
+          nxp,phase-shift:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            default: 0
+            enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
+            description:
+              BUCK regulators phase shift control in degrees.
+
+        unevaluatedProperties: false
+
+    properties:
+      vsnvs:
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single VSNVS regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "nxp,pf8100";
+            reg = <0x08>;
+
+            regulators {
+                reg_ldo1: ldo1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_ldo2: ldo2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_ldo3: ldo3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_ldo4: ldo4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-min-microvolt = <1500000>;
+                };
+
+                reg_buck1: buck1 {
+                    nxp,ilim-ma = <4500>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck2: buck2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck3: buck3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck4: buck4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck5: buck5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck6: buck6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-min-microvolt =  <400000>;
+                };
+
+                reg_buck7: buck7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-min-microvolt = <3300000>;
+                };
+
+                reg_vsnvs: vsnvs {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-min-microvolt = <1800000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml
new file mode 100644
index 0000000000..eb61e04ef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/onnn,fan53880.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/onnn,fan53880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Onsemi FAN53880 PMIC
+
+maintainers:
+  - Christoph Fritz <chf.fritz@googlemail.com>
+
+description: |
+  The FAN53880 is an I2C porgrammable power management IC (PMIC)
+  that contains a BUCK (step-down converter), four low dropouts (LDO)
+  and one BOOST (step-up converter) output. It is designed for mobile
+  power applications.
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - onnn,fan53880
+
+  reg:
+    maxItems: 1
+
+  VIN12-supply:
+    description: Input supply phandle(s) for LDO1 and LDO2
+
+  VIN3-supply:
+    description: Input supply phandle(s) for LDO3
+
+  VIN4-supply:
+    description: Input supply phandle(s) for LDO4
+
+  PVIN-supply:
+    description: Input supply phandle(s) for BUCK and BOOST
+
+  regulators:
+    type: object
+    $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-4], BUCK and BOOST
+
+    patternProperties:
+      "^LDO[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+
+      "^BUCK|BOOST$":
+        type: object
+        $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@35 {
+            compatible = "onnn,fan53880";
+            reg = <0x35>;
+
+            PVIN-supply = <&fixreg_example_vcc>;
+
+            regulators {
+                BUCK {
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
new file mode 100644
index 0000000000..84bc76a7c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -0,0 +1,89 @@
+* palmas regulator IP block devicetree bindings
+
+The tps659038 for the AM57x class have OTP spins that
+have different part numbers but the same functionality. There
+is not a need to add the OTP spins to the palmas driver. The
+spin devices should use the tps659038 as it's compatible value.
+This is the list of those devices:
+tps659037
+
+Required properties:
+- compatible : Should be from the list
+  ti,twl6035-pmic
+  ti,twl6036-pmic
+  ti,twl6037-pmic
+  ti,tps65913-pmic
+  ti,tps65914-pmic
+  ti,tps65917-pmic
+  ti,tps659038-pmic
+and also the generic series names
+  ti,palmas-pmic
+- interrupts : The interrupt number and the type which can be looked up here:
+	       arch/arm/boot/dts/include/dt-bindings/interrupt-controller/irq.h
+- interrupts-name: The names of the individual interrupts.
+
+Optional properties:
+- ti,ldo6-vibrator : ldo6 is in vibrator mode
+
+Optional nodes:
+- regulators : Must contain a sub-node per regulator from the list below.
+	       Each sub-node should contain the constraints and initialization
+	       information for that regulator. See regulator.txt for a
+	       description of standard properties for these sub-nodes.
+	       Additional custom properties  are listed below.
+
+	       For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
+	       smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
+	       smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb.
+
+	       Optional sub-node properties:
+	       ti,warm-reset - maintain voltage during warm reset(boolean)
+	       ti,roof-floor - This takes as optional argument on platform supporting
+	       the rail from desired external control. If there is no argument then
+	       it will be assume that it is controlled by NSLEEP pin.
+	       The valid value for external pins are:
+			ENABLE1 then 1,
+			ENABLE2 then 2 or
+			NSLEEP then 3.
+	       ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
+	       2 - eco, 3 - forced pwm
+	       ti,smps-range - OTP has the wrong range set for the hardware so override
+	       0 - low range, 1 - high range.
+
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+			      the system power.
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+pmic {
+	compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+	interrupt-parent = <&palmas>;
+	interrupts = <14 IRQ_TYPE_NONE>;
+	interrupts-name = "short-irq";
+
+	ti,ldo6-vibrator;
+
+	ti,system-power-controller;
+
+	regulators {
+		smps12_reg : smps12 {
+			regulator-name = "smps12";
+			regulator-min-microvolt = < 600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,warm-reset;
+			ti,roof-floor = <1>; /* ENABLE1 control */
+			ti,mode-sleep = <0>;
+			ti,smps-range = <1>;
+		};
+
+		ldo1_reg: ldo1 {
+			regulator-name = "ldo1";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644
index 0000000000..acbcb452a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,32 @@
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+  - should be "ti,pbias-dra7" for DRA7
+  - should be "ti,pbias-omap2" for OMAP2
+  - should be "ti,pbias-omap3" for OMAP3
+  - should be "ti,pbias-omap4" for OMAP4
+  - should be "ti,pbias-omap5" for OMAP5
+  - "ti,pbias-omap" is deprecated
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+			pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+			pbias_sim_omap3 for OMAP3 SoCs
+			pbias_mmc_omap4 for OMAP4 SoCs
+			pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
new file mode 100644
index 0000000000..0eda44752c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pfuze100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PFUZE100 family of regulators
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+description: |
+  The valid names for regulators are:
+  --PFUZE100
+  sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
+  --PFUZE200
+  sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
+  --PFUZE3000
+  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+  --PFUZE3001
+  sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
+
+  Each regulator is defined using the standard binding for regulators.
+
+properties:
+  $nodename:
+    pattern: "^pmic@[0-9]$"
+
+  compatible:
+    enum:
+      - fsl,pfuze100
+      - fsl,pfuze200
+      - fsl,pfuze3000
+      - fsl,pfuze3001
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,pfuze-support-disable-sw:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Boolean, if present disable all unused switch regulators to save power
+      consumption. Attention, ensure that all important regulators
+      (e.g. DDR ref, DDR supply) has set the "regulator-always-on" property.
+      If not present, the switched regulators are always on and can't be
+      disabled. This binding is a workaround to keep backward compatibility
+      with old dtb's which rely on the fact that the switched regulators are
+      always on and don't mark them explicit as "regulator-always-on".
+
+  fsl,pmic-stby-poweroff:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      if present, configure the PMIC to shutdown all
+      power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+      Use this option if the SoC should be powered off by external power management
+      IC (PMIC) on PMIC_STBY_REQ signal.
+      As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller.
+
+    patternProperties:
+      "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
+        $ref: regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^vgen[1-6]$":
+        $ref: regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^vldo[1-4]$":
+        $ref: regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
+        $ref: regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "fsl,pfuze100";
+            reg = <0x08>;
+
+            regulators {
+                sw1a_reg: sw1ab {
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1875000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                    regulator-ramp-delay = <6250>;
+                };
+
+                sw1c_reg: sw1c {
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1875000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw2_reg: sw2 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw3a_reg: sw3a {
+                    regulator-min-microvolt = <400000>;
+                    regulator-max-microvolt = <1975000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw3b_reg: sw3b {
+                    regulator-min-microvolt = <400000>;
+                    regulator-max-microvolt = <1975000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw4_reg: sw4 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                swbst_reg: swbst {
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5150000>;
+                };
+
+                snvs_reg: vsnvs {
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                vref_reg: vrefddr {
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                vgen1_reg: vgen1 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1550000>;
+                };
+
+                vgen2_reg: vgen2 {
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1550000>;
+                };
+
+                vgen3_reg: vgen3 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                vgen4_reg: vgen4 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vgen5_reg: vgen5 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+
+                vgen6_reg: vgen6 {
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt
new file mode 100644
index 0000000000..6a7c8a92fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pv88060.txt
@@ -0,0 +1,124 @@
+* Powerventure Semiconductor PV88060 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88060".
+- reg: I2C slave address, usually 0x49.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
+  SW5, and SW6.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+	pmic: pv88060@49 {
+		compatible = "pvs,pv88060";
+		reg = <0x49>;
+		interrupt-parent = <&gpio>;
+		interrupts = <24 24>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <4387500>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+				regulator-boot-on;
+			};
+
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			SW1 {
+				regulator-name = "sw1";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+
+			SW2 {
+				regulator-name = "sw2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW3 {
+				regulator-name = "sw3";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW4 {
+				regulator-name = "sw4";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW5 {
+				regulator-name = "sw5";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW6 {
+				regulator-name = "sw6";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt
new file mode 100644
index 0000000000..e6e4b9c82d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pv88080.txt
@@ -0,0 +1,62 @@
+* Powerventure Semiconductor PV88080 Voltage Regulator
+
+Required properties:
+- compatible: Must be one of the following, depending on the
+  silicon version:
+	- "pvs,pv88080" (DEPRECATED)
+
+	- "pvs,pv88080-aa" for PV88080 AA or AB silicon
+	- "pvs,pv88080-ba" for PV88080 BA or BB silicon
+  NOTE: The use of the compatibles with no silicon version is deprecated.
+- reg: I2C slave address, usually 0x49
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCK1, BUCK2, BUCK3 and HVBUCK.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example:
+
+	pmic: pv88080@49 {
+		compatible = "pvs,pv88080-ba";
+		reg = <0x49>;
+		interrupt-parent = <&gpio>;
+		interrupts = <24 24>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1393750>;
+				regulator-min-microamp 	= < 220000>;
+				regulator-max-microamp 	= <7040000>;
+			};
+
+			BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1393750>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+			};
+
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2193750>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+			};
+
+			HVBUCK {
+				regulator-name = "hvbuck";
+				regulator-min-microvolt = <   5000>;
+				regulator-max-microvolt = <1275000>;
+ 			};
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/regulator/pv88090.txt b/Documentation/devicetree/bindings/regulator/pv88090.txt
new file mode 100644
index 0000000000..e52b2a95cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pv88090.txt
@@ -0,0 +1,65 @@
+* Powerventure Semiconductor PV88090 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88090".
+- reg: I2C slave address, usually 0x48.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+	pmic: pv88090@48 {
+		compatible = "pvs,pv88090";
+		reg = <0x48>;
+		interrupt-parent = <&gpio>;
+		interrupts = <24 24>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1393750>;
+				regulator-min-microamp 	= < 220000>;
+				regulator-max-microamp 	= <7040000>;
+				regulator-boot-on;
+			};
+
+			BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1393750>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+			};
+
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1393750>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+				regulator-boot-on;
+			};
+
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <4350000>;
+				regulator-boot-on;
+			};
+
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = < 650000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-boot-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
new file mode 100644
index 0000000000..80ecf938b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PWM Regulator
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+  - Lee Jones <lee@kernel.org>
+  - Alexandre Courbot <acourbot@nvidia.com>
+
+description: |
+  Currently supports 2 modes of operation:
+
+  Voltage Table:
+    When in this mode, a voltage table (See below) of predefined voltage <=>
+    duty-cycle values must be provided via DT. Limitations are that the
+    regulator can only operate at the voltages supplied in the table.
+    Intermediary duty-cycle values which would normally allow finer grained
+    voltage selection are ignored and rendered useless.  Although more control
+    is given to the user if the assumptions made in continuous-voltage mode do
+    not reign true.
+
+  Continuous Voltage:
+    This mode uses the regulator's maximum and minimum supplied voltages
+    specified in the regulator-{min,max}-microvolt properties to calculate
+    appropriate duty-cycle values.  This allows for a much more fine grained
+    solution when compared with voltage-table mode above.  This solution does
+    make an assumption that a %50 duty-cycle value will cause the regulator
+    voltage to run at half way between the supplied max_uV and min_uV values.
+
+  If voltage-table is provided, then the device will be used in Voltage Table
+  Mode.  If no voltage-table is provided, then the device will be used in
+  Continuous Voltage Mode.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: pwm-regulator
+
+  pwms:
+    maxItems: 1
+
+  voltage-table:
+    description: Voltage and Duty-Cycle table.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: voltage in microvolts (uV)
+        - description: duty-cycle in percent (%)
+
+  enable-gpios:
+    description: Regulator enable GPIO
+    maxItems: 1
+
+   # Optional properties for Continuous mode:
+  pwm-dutycycle-unit:
+    description:
+      Integer value encoding the duty cycle unit. If not
+        defined, <100> is assumed, meaning that
+        pwm-dutycycle-range contains values expressed in
+        percent.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
+
+  pwm-dutycycle-range:
+    description:
+      Should contain 2 entries. The first entry is encoding
+        the dutycycle for regulator-min-microvolt and the
+        second one the dutycycle for regulator-max-microvolt.
+        Duty cycle values are expressed in pwm-dutycycle-unit.
+        If not defined, <0 100> is assumed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: the dutycycle for regulator-min-microvolt
+      - description: the dutycycle for regulator-max-microvolt
+    default: [ 0 100 ]
+
+required:
+  - compatible
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Continuous Voltage With Enable GPIO Example:
+    regulator {
+        compatible = "pwm-regulator";
+        pwms = <&pwm1 0 8448 0>;
+        enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+        regulator-min-microvolt = <1016000>;
+        regulator-max-microvolt = <1114000>;
+        regulator-name = "vdd_logic";
+        /* unit == per-mille */
+        pwm-dutycycle-unit = <1000>;
+        /*
+        * Inverted PWM logic, and the duty cycle range is limited
+        * to 30%-70%.
+        */
+        pwm-dutycycle-range = <700 300>; /* */
+    };
+
+  - |
+    // Voltage Table Example:
+    regulator {
+        compatible = "pwm-regulator";
+        pwms = <&pwm1 0 8448 0>;
+        regulator-min-microvolt = <1016000>;
+        regulator-max-microvolt = <1114000>;
+        regulator-name = "vdd_logic";
+
+                /* Voltage Duty-Cycle */
+        voltage-table = <1114000 0>,
+            <1095000 10>,
+            <1076000 20>,
+            <1056000 30>,
+            <1036000 40>,
+            <1016000 50>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
new file mode 100644
index 0000000000..b4eb4001eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM regulator
+
+description:
+  The Qualcomm RPM regulator is modelled as a subdevice of the RPM.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
+  for information regarding the RPM node.
+
+  The regulator node houses sub-nodes for each regulator within the device.
+  Each sub-node is identified using the node's name, with valid values listed
+  for each of the pmics below.
+
+  For pm8058 l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
+  l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
+  lvs0, lvs1, ncp
+
+  For pm8901 l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
+  mvs
+
+  For pm8921 s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
+  l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
+  ncp
+
+  For pm8018 s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l14, lvs1
+
+  For smb208 s1a, s1b, s2a, s2b
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-pm8058-regulators
+      - qcom,rpm-pm8901-regulators
+      - qcom,rpm-pm8921-regulators
+      - qcom,rpm-pm8018-regulators
+      - qcom,rpm-smb208-regulators
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^((s|l|lvs)[0-9]*|s[1-2][a-b]|ncp|mvs|usb-switch|hdmi-switch)$":
+    description: List of regulators and its properties
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      bias-pull-down:
+        description: enable pull down of the regulator when inactive
+        type: boolean
+
+      qcom,switch-mode-frequency:
+        description: Frequency (Hz) of the switch-mode power supply
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 19200000
+          - 9600000
+          - 6400000
+          - 4800000
+          - 3840000
+          - 3200000
+          - 2740000
+          - 2400000
+          - 2130000
+          - 1920000
+          - 1750000
+          - 1600000
+          - 1480000
+          - 1370000
+          - 1280000
+          - 1200000
+
+      qcom,force-mode:
+        description: Indicates that the regulator should be forced to a particular mode
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 0 # QCOM_RPM_FORCE_MODE_NONE do not force any mode
+          - 1 # QCOM_RPM_FORCE_MODE_LPM force into low power mode
+          - 2 # QCOM_RPM_FORCE_MODE_HPM force into high power mode
+          - 3 # QCOM_RPM_FORCE_MODE_AUTO allow regulator to automatically select its own mode
+              # based on realtime current draw, only for pm8921 smps and ftsmps
+
+      qcom,power-mode-hysteretic:
+        description: select that the power supply should operate in hysteretic mode,
+          instead of the default pwm mode
+        type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/mfd/qcom-rpm.h>
+    regulators {
+      compatible = "qcom,rpm-pm8921-regulators";
+      vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+      s1 {
+        regulator-min-microvolt = <1225000>;
+        regulator-max-microvolt = <1225000>;
+
+        bias-pull-down;
+
+        qcom,switch-mode-frequency = <3200000>;
+      };
+
+      pm8921_s4: s4 {
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+
+        qcom,switch-mode-frequency = <1600000>;
+        bias-pull-down;
+
+        qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
new file mode 100644
index 0000000000..127a6f39b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -0,0 +1,497 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpmh-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. RPMh Regulators
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+    rpmh-regulator devices support PMIC regulator management via the Voltage
+    Regulator Manager (VRM) and Oscillator Buffer (XOB) RPMh accelerators.
+    The APPS processor communicates with these hardware blocks via a
+    Resource State Coordinator (RSC) using command packets.  The VRM allows
+    changing three parameters for a given regulator, enable state, output
+    voltage, and operating mode.  The XOB allows changing only a single
+    parameter for a given regulator, its enable state.  Despite its name,
+    the XOB is capable of controlling the enable state of any PMIC peripheral.
+    It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators
+    which have a fixed voltage and mode.
+
+    =======================
+    Required Node Structure
+    =======================
+
+    RPMh regulators must be described in two levels of device nodes.  The first
+    level describes the PMIC containing the regulators and must reside within an
+    RPMh device node.  The second level describes each regulator within the PMIC
+    which is to be used on the board.  Each of these regulators maps to a single
+    RPMh resource.
+
+    The names used for regulator nodes must match those supported by a given
+    PMIC. Supported regulator node names are
+      For PM6150, smps1 - smps5, ldo1 - ldo19
+      For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+      For PM6350, smps1 - smps5, ldo1 - ldo22
+      For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19
+      For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob
+      For PM7325, smps1 - smps8, ldo1 - ldo19
+      For PM8005, smps1 - smps4
+      For PM8009, smps1 - smps2, ldo1 - ldo7
+      For PM8150, smps1 - smps10, ldo1 - ldo18
+      For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
+      For PM8350, smps1 - smps12, ldo1 - ldo10
+      For PM8350C, smps1 - smps10, ldo1 - ldo13, bob
+      For PM8450, smps1 - smps6, ldo1 - ldo4
+      For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2
+      For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
+      For PMI8998, bob
+      For PMR735A, smps1 - smps3, ldo1 - ldo7
+      For PMX55, smps1 - smps7, ldo1 - ldo16
+      For PMX65, smps1 - smps8, ldo1 - ldo21
+      For PMX75, smps1 - smps10, ldo1 - ldo21
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm6150-rpmh-regulators
+      - qcom,pm6150l-rpmh-regulators
+      - qcom,pm6350-rpmh-regulators
+      - qcom,pm660-rpmh-regulators
+      - qcom,pm660l-rpmh-regulators
+      - qcom,pm7325-rpmh-regulators
+      - qcom,pm8005-rpmh-regulators
+      - qcom,pm8009-rpmh-regulators
+      - qcom,pm8009-1-rpmh-regulators
+      - qcom,pm8150-rpmh-regulators
+      - qcom,pm8150l-rpmh-regulators
+      - qcom,pm8350-rpmh-regulators
+      - qcom,pm8350c-rpmh-regulators
+      - qcom,pm8450-rpmh-regulators
+      - qcom,pm8550-rpmh-regulators
+      - qcom,pm8550ve-rpmh-regulators
+      - qcom,pm8550vs-rpmh-regulators
+      - qcom,pm8998-rpmh-regulators
+      - qcom,pmc8180-rpmh-regulators
+      - qcom,pmc8180c-rpmh-regulators
+      - qcom,pmg1110-rpmh-regulators
+      - qcom,pmi8998-rpmh-regulators
+      - qcom,pmm8155au-rpmh-regulators
+      - qcom,pmm8654au-rpmh-regulators
+      - qcom,pmr735a-rpmh-regulators
+      - qcom,pmx55-rpmh-regulators
+      - qcom,pmx65-rpmh-regulators
+      - qcom,pmx75-rpmh-regulators
+
+  qcom,pmic-id:
+    description: |
+        RPMh resource name suffix used for the regulators found
+        on this PMIC.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n]
+
+  qcom,always-wait-for-ack:
+    description: |
+        Boolean flag which indicates that the application processor
+        must wait for an ACK or a NACK from RPMh for every request
+        sent for this regulator including those which are for a
+        strictly lower power state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  vdd-flash-supply:
+    description: Input supply phandle of flash.
+
+  vdd-rgb-supply:
+    description: Input supply phandle of rgb.
+
+  bob:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: BOB regulator node.
+    dependencies:
+      regulator-allow-set-load: [ regulator-allowed-modes ]
+
+patternProperties:
+  "^(smps|ldo|lvs|bob)[0-9]+$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: smps/ldo regulator nodes(s).
+    dependencies:
+      regulator-allow-set-load: [ regulator-allowed-modes ]
+
+required:
+  - compatible
+  - qcom,pmic-id
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l3-supply: true
+        vdd-l4-l7-l8-supply: true
+        vdd-l5-l16-l17-l18-l19-supply: true
+        vdd-l10-l14-l15-supply: true
+        vdd-l11-l12-l13-supply: true
+      patternProperties:
+        "^vdd-l[169]-supply$": true
+        "^vdd-s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150l-rpmh-regulators
+            - qcom,pm8150l-rpmh-regulators
+            - qcom,pmc8180c-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l6-l7-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l5-supply: true
+        vdd-l8-l9-l10-l11-l12-l13-l14-supply: true
+        vdd-l15-l16-l17-l18-l19-supply: true
+      patternProperties:
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l9-l10-supply: true
+        vdd-l2-supply: true
+        vdd-l3-l5-l7-l8-supply: true
+        vdd-l4-l6-supply: true
+        vdd-s3-s4-supply: true
+      patternProperties:
+        "^vdd-s[125]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm7325-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-l12-l15-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l11-l17-l18-l19-supply: true
+        vdd-l13-supply: true
+        vdd-l14-l16-supply: true
+      patternProperties:
+        "^vdd-l[358]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8005-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8009-rpmh-regulators
+            - qcom,pm8009-1-rpmh-regulators
+    then:
+      properties:
+        vdd-l5-l6-supply: true
+      patternProperties:
+        "^vdd-l[1-47]-supply$": true
+        "^vdd-s[1-2]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150-rpmh-regulators
+            - qcom,pmc8180-rpmh-regulators
+            - qcom,pmm8155au-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l8-l11-supply: true
+        vdd-l2-l10-supply: true
+        vdd-l3-l4-l5-l18-supply: true
+        vdd-l6-l9-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l13-l16-l17-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmm8654au-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-supply: true
+        vdd-l5-supply: true
+        vdd-l6-l7-supply: true
+        vdd-l8-l9-supply: true
+      patternProperties:
+        "^vdd-s[1-9]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l3-l5-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l8-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-2])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350c-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l12-supply: true
+        vdd-l2-l8-supply: true
+        vdd-l3-l4-l5-l7-l13-supply: true
+        vdd-l6-l9-l11-supply: true
+        vdd-l10-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8450-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-4]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8550-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-l10-supply: true
+        vdd-l2-l13-l14-supply: true
+        vdd-l5-l16-supply: true
+        vdd-l6-l7-supply: true
+        vdd-l8-l9-supply: true
+      patternProperties:
+        "^vdd-l(3|1[1-7])-supply$": true
+        "^vdd-s[1-6]-supply$": true
+        "^vdd-bob[1-2]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8550ve-rpmh-regulators
+            - qcom,pm8550vs-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-3]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8998-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l27-supply: true
+        vdd-l2-l8-l17-supply: true
+        vdd-l3-l11-supply: true
+        vdd-l4-l5-supply: true
+        vdd-l6-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l9-supply: true
+        vdd-l10-l23-l25-supply: true
+        vdd-l13-l19-l21-supply: true
+        vdd-l16-l28-supply: true
+        vdd-l18-l22-supply: true
+        vdd-l20-l24-supply: true
+        vdd-l26-supply: true
+        vin-lvs-1-2-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-3])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmg1110-rpmh-regulators
+    then:
+      properties:
+        vdd-s1-supply: true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmi8998-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmr735a-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-supply: true
+        vdd-l4-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-bob-supply: true
+      patternProperties:
+        "^vdd-s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx55-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l9-supply: true
+        vdd-l4-l12-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-l8-supply: true
+        vdd-l10-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l1[4-6]-supply$": true
+        "^vdd-s[1-7]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx65-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l18-supply: true
+        vdd-l5-l6-l16-supply: true
+        vdd-l8-l9-supply: true
+        vdd-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l[1347]-supply$": true
+        "^vdd-l1[024579]-supply$": true
+        "^vdd-l2[01]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx75-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l18-supply: true
+        vdd-l4-l16-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l8-l9-supply: true
+        vdd-l11-l13-supply: true
+        vdd-l20-l21-supply: true
+      patternProperties:
+        "^vdd-l[137]-supply$": true
+        "^vdd-l1[024579]-supply$": true
+        "^vdd-s([1-9]|10)-supply$": true
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+    pm8998-rpmh-regulators {
+        compatible = "qcom,pm8998-rpmh-regulators";
+        qcom,pmic-id = "a";
+
+        vdd-l7-l12-l14-l15-supply = <&pm8998_s5>;
+
+        smps2 {
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+        };
+
+        ldo7 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+                                       RPMH_REGULATOR_MODE_HPM>;
+            regulator-allow-set-load;
+        };
+
+        lvs1 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+        };
+    };
+
+    pmi8998-rpmh-regulators {
+        compatible = "qcom,pmi8998-rpmh-regulators";
+        qcom,pmic-id = "b";
+
+        bob {
+            regulator-min-microvolt = <3312000>;
+            regulator-max-microvolt = <3600000>;
+            regulator-allowed-modes = <RPMH_REGULATOR_MODE_AUTO
+                                       RPMH_REGULATOR_MODE_HPM>;
+            regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
new file mode 100644
index 0000000000..f02f97d4fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,sdm845-refgen-regulator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,sdm845-refgen-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. REFGEN Regulator
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The REFGEN (reference voltage generator) regulator provides reference
+  voltage for on-chip IPs (like PHYs) on some Qualcomm SoCs.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-refgen-regulator
+              - qcom,sc8180x-refgen-regulator
+              - qcom,sm8150-refgen-regulator
+          - const: qcom,sdm845-refgen-regulator
+
+      - items:
+          - enum:
+              - qcom,sc7280-refgen-regulator
+              - qcom,sc8280xp-refgen-regulator
+              - qcom,sm6350-refgen-regulator
+              - qcom,sm6375-refgen-regulator
+              - qcom,sm8350-refgen-regulator
+          - const: qcom,sm8250-refgen-regulator
+
+      - enum:
+          - qcom,sdm845-refgen-regulator
+          - qcom,sm8250-refgen-regulator
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator@162f000 {
+      compatible = "qcom,sm8250-refgen-regulator";
+      reg = <0x0162f000 0x84>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
new file mode 100644
index 0000000000..9ea8ac0786
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM SMD RPM REGULATOR
+
+description:
+  The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
+  Because SMD is used as the communication transport mechanism, the RPM
+  resides as a subnode of the SMD.  As such, the SMD-RPM regulator requires
+  that the SMD and RPM nodes be present.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for
+  information pertaining to the SMD node.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+  for information regarding the RPM node.
+
+  The regulator node houses sub-nodes for each regulator within the device.
+  Each sub-node is identified using the node's name, with valid values listed
+  for each of the pmics below.
+
+  For mp5496, s1, s2
+
+  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
+
+  For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9,
+  l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24
+
+  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
+  l12, l13, l14, l15, l16, l17, l18, l19
+
+  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
+
+  For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
+  l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
+  l26, l27, l28, lvs1
+
+  For pm8841, s1, s2, s3, s4, s5, s6, s7, s8
+
+  For pm8909, s1, s2, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+  l14, l15, l17, l18
+
+  For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18
+
+  For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
+  lvs3, 5vs1, 5vs2
+
+  For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6,
+  l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22,
+  l23
+
+  For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
+  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
+  For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2,
+  l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
+
+  For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
+  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
+  l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
+
+  For pmi8994, s1, s2, s3, boost-bypass
+
+  For pmi8998, bob
+
+  For pmr735a, s1, s2, s3, l1, l2, l3, l4, l5, l6, l7
+
+  For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm6125-regulators
+      - qcom,rpm-pm660-regulators
+      - qcom,rpm-pm660l-regulators
+      - qcom,rpm-pm8226-regulators
+      - qcom,rpm-pm8841-regulators
+      - qcom,rpm-pm8909-regulators
+      - qcom,rpm-pm8916-regulators
+      - qcom,rpm-pm8941-regulators
+      - qcom,rpm-pm8950-regulators
+      - qcom,rpm-pm8953-regulators
+      - qcom,rpm-pm8994-regulators
+      - qcom,rpm-pm8998-regulators
+      - qcom,rpm-pma8084-regulators
+      - qcom,rpm-pmi8994-regulators
+      - qcom,rpm-pmi8998-regulators
+      - qcom,rpm-pmr735a-regulators
+      - qcom,rpm-pms405-regulators
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
+    description: List of regulators and its properties
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    pm8941-regulators {
+        compatible = "qcom,rpm-pm8941-regulators";
+        vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;
+
+        pm8941_s3: s3 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+        };
+
+        pm8941_boost: s4 {
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <5000000>;
+        };
+
+        pm8941_l20: l20 {
+            regulator-min-microvolt = <2950000>;
+            regulator-max-microvolt = <2950000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
new file mode 100644
index 0000000000..bdf34c2de9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Regulators
+
+maintainers:
+  - Robert Marko <robimarko@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm6125-regulators
+      - qcom,pm660-regulators
+      - qcom,pm660l-regulators
+      - qcom,pm8004-regulators
+      - qcom,pm8005-regulators
+      - qcom,pm8226-regulators
+      - qcom,pm8841-regulators
+      - qcom,pm8916-regulators
+      - qcom,pm8941-regulators
+      - qcom,pm8950-regulators
+      - qcom,pm8994-regulators
+      - qcom,pmi8994-regulators
+      - qcom,pmp8074-regulators
+      - qcom,pms405-regulators
+
+  qcom,saw-reg:
+    description: Reference to syscon node defining the SAW registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
+    description: List of regulators and its properties
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      qcom,ocp-max-retries:
+        description:
+          Maximum number of times to try toggling a voltage switch off and
+          back on as a result of consecutive over current events
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      qcom,ocp-retry-delay:
+        description:
+          Time to delay in milliseconds between each voltage switch toggle
+          after an over current event takes place
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      qcom,pin-ctrl-enable:
+        description:
+          Bit mask specifying which hardware pins should be used to enable the
+          regulator, if any.
+          Supported bits are
+          0 = ignore all hardware enable signals
+          BIT(0) = follow HW0_EN signal
+          BIT(1) = follow HW1_EN signal
+          BIT(2) = follow HW2_EN signal
+          BIT(3) = follow HW3_EN signal
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      qcom,pin-ctrl-hpm:
+        description:
+          Bit mask specifying which hardware pins should be used to force the
+          regulator into high power mode, if any.
+          Supported bits are
+          0 = ignore all hardware enable signals
+          BIT(0) = follow HW0_EN signal
+          BIT(1) = follow HW1_EN signal
+          BIT(2) = follow HW2_EN signal
+          BIT(3) = follow HW3_EN signal
+          BIT(4) = follow PMIC awake state
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+
+      qcom,vs-soft-start-strength:
+        description:
+          This property sets the soft start strength for voltage switch type
+          regulators.
+          Supported values are
+          0 = 0.05 uA
+          1 = 0.25 uA
+          2 = 0.55 uA
+          3 = 0.75 uA
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+
+      qcom,saw-slave:
+        description: SAW controlled gang slave. Will not be configured.
+        type: boolean
+
+      qcom,saw-leader:
+        description:
+          SAW controlled gang leader. Will be configured as SAW regulator.
+        type: boolean
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6125-regulators
+    then:
+      properties:
+        vdd_l1_l7_l17_l18-supply: true
+        vdd_l2_l3_l4-supply: true
+        vdd_l5_l15_l19_l20_l21_l22-supply: true
+        vdd_l6_l8-supply: true
+        vdd_l9_l11-supply: true
+        vdd_l10_l13_l14-supply: true
+        vdd_l12_l16-supply: true
+        vdd_l23_l24-supply: true
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660-regulators
+    then:
+      properties:
+        vdd_l15_l16_l17_l18_l19-supply: true
+        vdd_l1_l6_l7-supply: true
+        vdd_l2_l3-supply: true
+        vdd_l5-supply: true
+        vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-regulators
+    then:
+      properties:
+        vdd_l1_l9_l10-supply: true
+        vdd_l2-supply: true
+        vdd_l3_l5_l7_l8-supply: true
+        vdd_l4_l6-supply: true
+      patternProperties:
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8004-regulators
+    then:
+      patternProperties:
+        "^vdd_s[25]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8005-regulators
+    then:
+      patternProperties:
+        "^vdd_s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8226-regulators
+    then:
+      properties:
+        vdd_l10_l11_l13-supply: true
+        vdd_l12_l14-supply: true
+        vdd_l15_l16_l17_l18-supply: true
+        vdd_l19_l20_l21_l22_l23_l28-supply: true
+        vdd_l1_l2_l4_l5-supply: true
+        vdd_l25-supply: true
+        vdd_l3_l24_l26-supply: true
+        vdd_l6_l7_l8_l9_l27-supply: true
+        vdd_lvs1-supply: true
+      patternProperties:
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8841-regulators
+    then:
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-regulators
+    then:
+      properties:
+        vdd_l1_l3-supply: true
+        vdd_l4_l5_l6-supply: true
+        vdd_l8_l11_l14_l15_l16-supply: true
+        vdd_l9_l10_l12_l13_l17_l18-supply: true
+      patternProperties:
+        "^vdd_l[27]-supply$": true
+        "^vdd_s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-regulators
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Over-current protection interrupt for 5V S1
+            - description: Over-current protection interrupt for 5V S2
+        interrupt-names:
+          items:
+            - const: ocp-5vs1
+            - const: ocp-5vs2
+        vdd_l13_l20_l23_l24-supply: true
+        vdd_l1_l3-supply: true
+        vdd_l21-supply: true
+        vdd_l2_lvs_1_2_3-supply: true
+        vdd_l4_l11-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l14_l15-supply: true
+        vdd_l8_l16_l18_19-supply: true
+        vdd_l9_l10_l17_l22-supply: true
+        vin_5vs-supply: true
+      patternProperties:
+        "^vdd_s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8950-regulators
+    then:
+      properties:
+        vdd_l1_l19-supply: true
+        vdd_l20-supply: true
+        vdd_l21-supply: true
+        vdd_l2_l23-supply: true
+        vdd_l3-supply: true
+        vdd_l4_l5_l6_l7_l16-supply: true
+        vdd_l8_l11_l12_l17_l22-supply: true
+        vdd_l9_l10_l13_l14_l15_l18-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8994-regulators
+    then:
+      properties:
+        vdd_l1-supply: true
+        vdd_l13_l19_l23_l24-supply: true
+        vdd_l14_l15-supply: true
+        vdd_l17_l29-supply: true
+        vdd_l20_l21-supply: true
+        vdd_l25-supply: true
+        vdd_l2_l26_l28-supply: true
+        vdd_l3_l11-supply: true
+        vdd_l4_l27_l31-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l32-supply: true
+        vdd_l8_l16_l30-supply: true
+        vdd_l9_l10_l18_l22-supply: true
+        vdd_lvs_1_2-supply: true
+      patternProperties:
+        "^vdd_s[1-9][0-2]?-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi8994-regulators
+    then:
+      properties:
+        vdd_l1-supply: true
+      patternProperties:
+        "^vdd_s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmp8074-regulators
+    then:
+      properties:
+        vdd_l10_l11_l12_l13-supply: true
+        vdd_l1_l2-supply: true
+        vdd_l3_l8-supply: true
+        vdd_l5_l6_l15-supply: true
+      patternProperties:
+        "^vdd_l[479]-supply$": true
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pms405-regulators
+    then:
+      properties:
+        vdd_s3-supply: true
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulators {
+      compatible = "qcom,pm8941-regulators";
+      vdd_l1_l3-supply = <&s1>;
+
+      s1: s1 {
+        regulator-min-microvolt = <1300000>;
+        regulator-max-microvolt = <1400000>;
+      };
+
+      l1: l1 {
+        regulator-min-microvolt = <1225000>;
+        regulator-max-microvolt = <1300000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
new file mode 100644
index 0000000000..89c564dfa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,usb-vbus-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Qualcomm PMIC VBUS output regulator driver
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description: |
+  This regulator driver controls the VBUS output by the Qualcomm PMIC.  This
+  regulator will be enabled in situations where the device is required to
+  provide power to the connected peripheral.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-vbus-reg
+
+  reg:
+    maxItems: 1
+    description: VBUS output base address
+
+required:
+  - compatible
+  - reg
+  - regulator-min-microamp
+  - regulator-max-microamp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     pm8150b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_vbus: usb-vbus-regulator@1100 {
+            compatible = "qcom,pm8150b-vbus-reg";
+            reg = <0x1100>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
+        };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
new file mode 100644
index 0000000000..e987c39b22
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) Regulator
+
+maintainers:
+  - Sumit Semwal <sumit.semwal@linaro.org>
+
+description:
+  LAB can be used as a positive boost power supply and IBB can be used as a
+  negative boost power supply for display panels. Currently implemented for
+  pmi8998.
+
+properties:
+  compatible:
+    const: qcom,pmi8998-lab-ibb
+
+  lab:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      qcom,soft-start-us:
+        description: Regulator soft start time in microseconds.
+        enum: [200, 400, 600, 800]
+        default: 200
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+        description:
+          Short-circuit and over-current interrupts for lab.
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
+    required:
+      - interrupts
+      - interrupt-names
+
+  ibb:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      qcom,discharge-resistor-kohms:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Discharge resistor value in KiloOhms.
+        enum: [300, 64, 32, 16]
+        default: 300
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+        description:
+          Short-circuit and over-current interrupts for ibb.
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
+    required:
+      - interrupts
+      - interrupt-names
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    labibb {
+      compatible = "qcom,pmi8998-lab-ibb";
+
+      lab {
+        interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
+      };
+
+      ibb {
+        interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
new file mode 100644
index 0000000000..41678400e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi 7" display ATTINY88-based regulator/backlight controller
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The RaspberryPi 7" display has an ATTINY88-based regulator/backlight
+  controller on the PCB, which is used to turn the display unit on/off
+  and control the backlight.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: raspberrypi,7inch-touchscreen-panel-regulator
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      regulator@45 {
+        compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+        reg = <0x45>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
new file mode 100644
index 0000000000..bcf788897e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
@@ -0,0 +1,222 @@
+Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply
+of these regulators are defined under parent device node.
+Details of regulator properties are defined as child node under
+sub-node "regulators" which is child node of device node.
+
+Please refer file <Documentation/devicetree/bindings/regulator/regulator.txt>
+for common regulator bindings used by client.
+
+Following are properties of parent node related to regulators.
+
+Optional properties:
+-------------------
+The input supply of regulators are the optional properties on the
+parent device node. The input supply of these regulators are provided
+through following properties:
+in-sd0-supply:		Input supply for SD0, INA-SD0 or INB-SD0 pins.
+in-sd1-supply:		Input supply for SD1.
+in-sd2-supply:		Input supply for SD2.
+in-sd3-supply:		Input supply for SD3.
+in-ldo0-1-supply:	Input supply for LDO0 and LDO1.
+in-ldo2-supply:		Input supply for LDO2.
+in-ldo3-5-supply:	Input supply for LDO3 and LDO5
+in-ldo4-6-supply:	Input supply for LDO4 and LDO6.
+in-ldo7-8-supply:	Input supply for LDO7 and LDO8.
+
+Optional sub nodes for regulators under "regulators" subnode:
+------------------------------------------------------------
+The subnodes name is the name of regulator and it must be one of:
+	sd[0-3], ldo[0-8]
+
+Each sub-node should contain the constraints and initialization
+information for that regulator. The definition for each of these
+nodes is defined using the standard binding for regulators found at
+<Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+There are also additional properties for SD/LDOs. These additional properties
+are required to configure FPS configuration parameters for SDs and LDOs.
+Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible
+Power Sequence (FPS).
+Following are additional properties:
+
+- maxim,active-fps-source:		FPS source for the regulators to get
+					enabled/disabled when system is in
+					active state.  Valid values are:
+					- MAX77620_FPS_SRC_0,
+						FPS source is FPS0.
+					- MAX77620_FPS_SRC_1,
+						FPS source is FPS1
+					- MAX77620_FPS_SRC_2 and
+						FPS source is FPS2
+					- MAX77620_FPS_SRC_NONE.
+						Regulator is not controlled
+						by FPS events and it gets
+						enabled/disabled by register
+						access.
+					Absence of this property will leave
+					the FPS configuration register for that
+					regulator to default configuration.
+
+- maxim,active-fps-power-up-slot:	Sequencing event slot number on which
+					the regulator get enabled when
+					master FPS input event set to HIGH.
+					Valid values are 0 to 7.
+					This is applicable if FPS source is
+					selected as FPS0, FPS1 or FPS2.
+			
+- maxim,active-fps-power-down-slot:	Sequencing event slot number on which
+					the regulator get disabled when master
+					FPS input event set to LOW.
+					Valid values are 0 to 7.
+					This is applicable if FPS source is
+					selected as FPS0, FPS1 or FPS2.
+			
+- maxim,suspend-fps-source:		This is same as property
+					"maxim,active-fps-source" but value
+					get configured when system enters in
+					to suspend state.
+
+- maxim,suspend-fps-power-up-slot:	This is same as property
+					"maxim,active-fps-power-up-slot" but
+					this value get configured into FPS
+					configuration register when system
+					enters into suspend.
+					This is applicable if suspend state
+					FPS source is selected as FPS0, FPS1 or
+
+- maxim,suspend-fps-power-down-slot:	This is same as property
+					"maxim,active-fps-power-down-slot" but
+					this value get configured into FPS
+					configuration register when system
+					enters into suspend.
+					This is applicable if suspend state
+					FPS source is selected as FPS0, FPS1 or
+					FPS2.
+- maxim,ramp-rate-setting:		integer, ramp rate(uV/us) setting to be
+					configured to the device.
+					The platform may have different ramp
+					rate than advertised ramp rate if it has
+					design variation from Maxim's
+					recommended. On this case, platform
+					specific ramp rate is used for ramp time
+					calculation and this property is used
+					for device register configurations.
+					The measured ramp rate of platform is
+					provided by the regulator-ramp-delay
+					as described in <devicetree/bindings/
+					regulator/regulator.txt>.
+					Maxim Max77620 supports following ramp
+					delay:
+					  SD: 13.75mV/us, 27.5mV/us, 55mV/us
+					  LDOs: 5mV/us, 100mV/us
+
+Note: If the measured ramp delay is same as advertised ramp delay then it is not
+required to provide the ramp delay with property "maxim,ramp-rate-setting". The
+ramp rate can be provided by the regulator-ramp-delay which will be used for
+ramp time calculation for voltage change as well as for device configuration.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+	in-ldo0-1-supply = <&max77620_sd2>;
+	in-ldo7-8-supply = <&max77620_sd2>;
+	regulators {
+		sd0 {
+			regulator-name = "vdd-core";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+		};
+
+		sd1 {
+			regulator-name = "vddio-ddr";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+			maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+		};
+
+		sd2 {
+			regulator-name = "vdd-pre-reg";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		sd3 {
+			regulator-name = "vdd-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo0 {
+			regulator-name = "avdd-sys";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo1 {
+			regulator-name = "vdd-pex";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		ldo2 {
+			regulator-name = "vddio-sdmmc3";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo3 {
+			regulator-name = "vdd-cam-hv";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		ldo4 {
+			regulator-name = "vdd-rtc";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo5 {
+			regulator-name = "avdd-ts-hv";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		ldo6 {
+			regulator-name = "vdd-ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo7 {
+			regulator-name = "vdd-gen-pll-edp";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo8 {
+			regulator-name = "vdd-hdmi-dp";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/regulator-output.yaml b/Documentation/devicetree/bindings/regulator/regulator-output.yaml
new file mode 100644
index 0000000000..078b37a1a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator-output.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/regulator/regulator-output.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator output connector
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+description: |
+  This describes a power output connector supplied by a regulator,
+  such as a power outlet on a power distribution unit (PDU).  The
+  connector may be standalone or merely one channel or set of pins
+  within a ganged physical connector carrying multiple independent
+  power outputs.
+
+properties:
+  compatible:
+    const: regulator-output
+
+  vout-supply:
+    description:
+      Phandle of the regulator supplying the output.
+
+required:
+  - compatible
+  - vout-supply
+
+additionalProperties: false
+
+examples:
+  - |
+      output {
+          compatible = "regulator-output";
+          vout-supply = <&output_reg>;
+      };
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
new file mode 100644
index 0000000000..487ccd8370
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -0,0 +1 @@
+This file has moved to regulator.yaml.
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
new file mode 100644
index 0000000000..9daf0fc246
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -0,0 +1,291 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltage/Current Regulators
+
+maintainers:
+  - Liam Girdwood <lgirdwood@gmail.com>
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  regulator-name:
+    description: A string used as a descriptive name for regulator outputs
+    $ref: /schemas/types.yaml#/definitions/string
+
+  regulator-min-microvolt:
+    description: smallest voltage consumers may set
+
+  regulator-max-microvolt:
+    description: largest voltage consumers may set
+
+  regulator-microvolt-offset:
+    description: Offset applied to voltages to compensate for voltage drops
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  regulator-min-microamp:
+    description: smallest current consumers may set
+
+  regulator-max-microamp:
+    description: largest current consumers may set
+
+  regulator-input-current-limit-microamp:
+    description: maximum input current regulator allows
+
+  regulator-always-on:
+    description: boolean, regulator should never be disabled
+    type: boolean
+
+  regulator-boot-on:
+    description: bootloader/firmware enabled regulator.
+      It's expected that this regulator was left on by the bootloader.
+      If the bootloader didn't leave it on then OS should turn it on
+      at boot but shouldn't prevent it from being turned off later.
+      This property is intended to only be used for regulators where
+      software cannot read the state of the regulator.
+    type: boolean
+
+  regulator-allow-bypass:
+    description: allow the regulator to go into bypass mode
+    type: boolean
+
+  regulator-allow-set-load:
+    description: allow the regulator performance level to be configured
+    type: boolean
+
+  regulator-ramp-delay:
+    description: ramp delay for regulator(in uV/us) For hardware which supports
+      disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
+      = <0>) for disabling ramp delay.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  regulator-enable-ramp-delay:
+    description: The time taken, in microseconds, for the supply rail to
+      reach the target voltage, plus/minus whatever tolerance the board
+      design requires. This property describes the total system ramp time
+      required due to the combination of internal ramping of the regulator
+      itself, and board design issues such as trace capacitance and load
+      on the supply.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  regulator-settling-time-us:
+    description: Settling time, in microseconds, for voltage change if regulator
+      have the constant time for any level voltage change. This is useful
+      when regulator have exponential voltage change.
+
+  regulator-settling-time-up-us:
+    description: Settling time, in microseconds, for voltage increase if
+      the regulator needs a constant time to settle after voltage increases
+      of any level. This is useful for regulators with exponential voltage
+      changes.
+
+  regulator-settling-time-down-us:
+    description: Settling time, in microseconds, for voltage decrease if
+      the regulator needs a constant time to settle after voltage decreases
+      of any level. This is useful for regulators with exponential voltage
+      changes.
+
+  regulator-soft-start:
+    description: Enable soft start so that voltage ramps slowly
+    type: boolean
+
+  regulator-initial-mode:
+    description: initial operating mode. The set of possible operating modes
+      depends on the capabilities of every hardware so each device binding
+      documentation explains which values the regulator supports.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  regulator-allowed-modes:
+    description: list of operating modes that software is allowed to configure
+      for the regulator at run-time.  Elements may be specified in any order.
+      The set of possible operating modes depends on the capabilities of
+      every hardware so each device binding document explains which values
+      the regulator supports.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  regulator-system-load:
+    description: Load in uA present on regulator that is not captured by
+      any consumer request.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  regulator-pull-down:
+    description: Enable pull down resistor when the regulator is disabled.
+    type: boolean
+
+  regulator-over-current-protection:
+    description: Enable over current protection.
+    type: boolean
+
+  regulator-oc-protection-microamp:
+    description: Set over current protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-oc-error-microamp:
+    description: Set over current error limit. This is a limit where part of
+      the hardware probably is malfunctional and damage prevention is requested.
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-oc-warn-microamp:
+    description: Set over current warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
+  regulator-ov-protection-microvolt:
+    description: Set over voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-ov-error-microvolt:
+    description: Set over voltage error limit. This is a limit where part of
+      the hardware probably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-ov-warn-microvolt:
+    description: Set over voltage warning limit. This is a limit where hardware
+      is assumed still to be functional but approaching limit where it gets
+      damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-uv-protection-microvolt:
+    description: Set over under voltage protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted. Limit is given as microvolt offset from
+      voltage set to regulator.
+
+  regulator-uv-error-microvolt:
+    description: Set under voltage error limit. This is a limit where part of
+      the hardware probably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted. Limit
+      is given as microvolt offset from voltage set to regulator.
+
+  regulator-uv-warn-microvolt:
+    description: Set over under voltage warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where
+      it gets damaged. Recovery actions should be initiated. Zero can be passed
+      to disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted. Limit is given as microvolt
+      offset from voltage set to regulator.
+
+  regulator-temp-protection-kelvin:
+    description: Set over temperature protection limit. This is a limit where
+      hardware performs emergency shutdown. Zero can be passed to disable
+      protection and value '1' indicates that protection should be enabled but
+      limit setting can be omitted.
+
+  regulator-temp-error-kelvin:
+    description: Set over temperature error limit. This is a limit where part of
+      the hardware probably is malfunctional and damage prevention is requested
+      Zero can be passed to disable error detection and value '1' indicates
+      that detection should be enabled but limit setting can be omitted.
+
+  regulator-temp-warn-kelvin:
+    description: Set over temperature warning limit. This is a limit where
+      hardware is assumed still to be functional but approaching limit where it
+      gets damaged. Recovery actions should be initiated. Zero can be passed to
+      disable detection and value '1' indicates that detection should
+      be enabled but limit setting can be omitted.
+
+  regulator-active-discharge:
+    description: |
+      tristate, enable/disable active discharge of regulators. The values are:
+      0: Disable active discharge.
+      1: Enable active discharge.
+      Absence of this property will leave configuration to default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  regulator-coupled-with:
+    description: Regulators with which the regulator is coupled. The linkage
+      is 2-way - all coupled regulators should be linked with each other.
+      A regulator should not be coupled with its supplier.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  regulator-coupled-max-spread:
+    description: Array of maximum spread between voltages of coupled regulators
+      in microvolts, each value in the array relates to the corresponding
+      couple specified by the regulator-coupled-with property.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  regulator-max-step-microvolt:
+    description: Maximum difference between current and target voltages
+      that can be changed safely in a single step.
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^regulator-state-(standby|mem|disk)$":
+    type: object
+    description:
+      sub-nodes for regulator state in Standby, Suspend-to-RAM, and
+      Suspend-to-DISK modes. Equivalent with standby, mem, and disk Linux
+      sleep states.
+
+    properties:
+      regulator-on-in-suspend:
+        description: regulator should be on in suspend state.
+        type: boolean
+
+      regulator-off-in-suspend:
+        description: regulator should be off in suspend state.
+        type: boolean
+
+      regulator-suspend-min-microvolt:
+        description: minimum voltage may be set in suspend state.
+
+      regulator-suspend-max-microvolt:
+        description: maximum voltage may be set in suspend state.
+
+      regulator-suspend-microvolt:
+        description: the default voltage which regulator would be set in
+          suspend. This property is now deprecated, instead setting voltage
+          for suspend mode via the API which regulator driver provides is
+          recommended.
+
+      regulator-changeable-in-suspend:
+        description: whether the default voltage and the regulator on/off
+          in suspend can be changed in runtime.
+        type: boolean
+
+      regulator-mode:
+        description: operating mode in the given suspend state. The set
+          of possible operating modes depends on the capabilities of every
+          hardware so the valid modes are documented on each regulator device
+          tree binding document.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    additionalProperties: false
+
+additionalProperties: true
+
+examples:
+  - |
+    xyzreg: regulator {
+      regulator-min-microvolt = <1000000>;
+      regulator-max-microvolt = <2500000>;
+      regulator-always-on;
+      vin-supply = <&vin>;
+
+      regulator-state-mem {
+        regulator-on-in-suspend;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
new file mode 100644
index 0000000000..97cff71d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/renesas,raa215300.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/renesas,raa215300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RAA215300 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The RAA215300 is a high-performance, low-cost 9-channel PMIC designed for
+  32-bit and 64-bit MCU and MPU applications. It supports DDR3, DDR3L, DDR4,
+  and LPDDR4 memory power requirements. The internally compensated regulators,
+  built-in Real-Time Clock (RTC), 32kHz crystal oscillator, and coin cell
+  battery charger provide a highly integrated, small footprint power solution
+  ideal for System-On-Module (SOM) applications. A spread spectrum feature
+  provides an ease-of-use solution for noise-sensitive audio or RF applications.
+
+  This device exposes two devices via I2C. One for the integrated RTC IP, and
+  one for everything else.
+
+  Link to datasheet:
+  https://www.renesas.com/in/en/products/power-power-management/multi-channel-power-management-ics-pmics/ssdsoc-power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc
+
+properties:
+  compatible:
+    enum:
+      - renesas,raa215300
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: main
+      - const: rtc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      The clocks are optional. The RTC is disabled, if no clocks are
+      provided(either xin or clkin).
+    maxItems: 1
+
+  clock-names:
+    description: |
+      Use xin, if connected to an external crystal.
+      Use clkin, if connected to an external clock signal.
+    enum:
+      - xin
+      - clkin
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 32.768kHz crystal */
+    x2: x2-clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <32768>;
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        raa215300: pmic@12 {
+            compatible = "renesas,raa215300";
+            reg = <0x12>, <0x6f>;
+            reg-names = "main", "rtc";
+
+            clocks = <&x2>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
new file mode 100644
index 0000000000..4a8a221bc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4801 Display Bias regulators
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  Regulator nodes should be named to DSVP and DSVN. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt4801
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIOs to use to enable DSVP/DSVN regulator.
+      The first one is ENP to enable DSVP, and second one is ENM to enable DSVN.
+      Number of GPIO in the array list could be 1 or 2.
+      If only one gpio is specified, only one gpio used to control ENP/ENM.
+      Else if both are specified, DSVP/DSVN could be controlled individually.
+      If this property not specified, treat both as always-on regulators.
+
+      Property is deprecated. Use enable-gpios in each regulator.
+    minItems: 1
+    maxItems: 2
+    deprecated: true
+
+patternProperties:
+  "^DSV(P|N)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single display bias regulator.
+
+    properties:
+      enable-gpios:
+        description:
+          GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured
+          for controlling both regulators.  If this property not specified for
+          any regulator, treat both as always-on regulators.
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rt4801@73 {
+            compatible = "richtek,rt4801";
+            reg = <0x73>;
+
+            dsvp: DSVP {
+                regulator-name = "rt4801,dsvp";
+                regulator-min-microvolt = <4000000>;
+                regulator-max-microvolt = <6000000>;
+                regulator-boot-on;
+                enable-gpios = <&gpio26 2 0>;
+            };
+            dsvn: DSVN {
+                regulator-name = "rt4801,dsvn";
+                regulator-min-microvolt = <4000000>;
+                regulator-max-microvolt = <6000000>;
+                regulator-boot-on;
+                enable-gpios = <&gpio26 3 0>;
+            };
+
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml
new file mode 100644
index 0000000000..6ceba022e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4803.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4803.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4803 Boost Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4803 is a boost regulator that's designed to provide the minimum output
+  voltage, even if the input voltage is lower than the required voltage. It
+  supports boost and auto bypass mode that depends on the difference between the
+  input and output voltage. If the input is lower than the output, mode will
+  transform to boost mode. Otherwise, turn on bypass switch to enter bypass mode.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4803/DS4803-03.pdf
+  https://www.richtek.com/assets/product_file/RT4803A/DS4803A-06.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt4803
+
+  reg:
+    maxItems: 1
+
+  richtek,vsel-active-high:
+    type: boolean
+    description: Specify the VSEL register group is using when system is active
+
+  regulator-allowed-modes:
+    description: |
+      Available operating mode
+        1: Auto PFM/PWM
+        2: Force PWM
+    items:
+      enum: [1, 2]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@75 {
+        compatible = "richtek,rt4803";
+        reg = <0x75>;
+        richtek,vsel-active-high;
+        regulator-name = "rt4803-regulator";
+        regulator-min-microvolt = <2850000>;
+        regulator-max-microvolt = <4400000>;
+        regulator-allowed-modes = <1 2>;
+        regulator-always-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
new file mode 100644
index 0000000000..cd06e957b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 Display Bias Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a multifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V.
+  It is sufficient to meet the current LCD power requirement.
+
+  DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power.
+  Its voltage should be configured above 0.15V to 0.2V gap larger than the
+  voltage needed for DSVP and DSVN. Too much voltage gap could improve the
+  voltage drop from the heavy loading scenario. But it also make the power
+  efficiency worse. It's a trade-off.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+patternProperties:
+  "^DSV(LCM|P|N)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single Display Bias Voltage regulator.
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
new file mode 100644
index 0000000000..89341fdaa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5190A PMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
+  synchronous buck converters, 1 LDO, I2C control interface and peripheral
+  logical control.
+
+  It also supports mute AC OFF depop sound and quick setting storage while
+  input power is removed.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5190a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vin2-supply:
+    description: phandle to buck2 input voltage.
+
+  vin3-supply:
+    description: phandle to buck3 input voltage.
+
+  vin4-supply:
+    description: phandle to buck4 input voltage.
+
+  vinldo-supply:
+    description: phandle to ldo input voltage
+
+  richtek,mute-enable:
+    description: |
+      The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control
+      signal. When enabled, The normal behavior is to bypass the 'mutein' signal
+      'muteout'. But if the power source removal is detected from 'vdet',
+      whatever the 'mutein' signal is, it will pull down the 'muteout' to force
+      speakers mute. this function is commonly used to prevent the speaker pop
+      noise during AC power turned off in the modern TV system design.
+    type: boolean
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$|^ldo$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck1 to buck4, and ldo.
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+             buck operating mode, only buck1/4 support mode operating.
+              0: auto mode
+              1: force pwm mode
+            items:
+              enum: [0, 1]
+
+          richtek,latchup-enable:
+            type: boolean
+            description: |
+              If specified, undervolt protection mode changes from the default
+              hiccup to latchup.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@64 {
+        compatible = "richtek,rt5190a";
+        reg = <0x64>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        vin2-supply = <&rt5190_buck1>;
+        vin3-supply = <&rt5190_buck1>;
+        vin4-supply = <&rt5190_buck1>;
+
+        regulators {
+          rt5190_buck1: buck1 {
+            regulator-name = "rt5190a-buck1";
+            regulator-min-microvolt = <5090000>;
+            regulator-max-microvolt = <5090000>;
+            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5190a-buck2";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+          };
+          buck3 {
+            regulator-name = "rt5190a-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+          };
+          buck4 {
+            regulator-name = "rt5190a-buck4";
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <850000>;
+            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+            regulator-boot-on;
+          };
+          ldo {
+            regulator-name = "rt5190a-ldo";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
new file mode 100644
index 0000000000..e95e046e9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5739.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5739 Step-Down Buck Converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5739 is a step-down switching buck converter that can deliver the
+  programmable output voltage from 300mV to 1300mV with wide input voltage
+  supply of 2.5V to 5.5V. It can provide up to 3.5A continuous current
+  capability at over 80% high efficiency.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5733
+      - richtek,rt5739
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  richtek,vsel-active-high:
+    description: |
+      If property is present, use the 'VSEL1' register group for buck control.
+      Else, use the 'VSEL0' register group. This depends on external hardware
+      'VSEL' pin connection.
+    type: boolean
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: Auto PFM/PWM mode
+        1: Forced PWM mode
+    items:
+      enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@50 {
+        compatible = "richtek,rt5739";
+        reg = <0x50>;
+        enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
+        richtek,vsel-active-high;
+        regulator-name = "richtek,rt5739-buck";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <0 1>;
+        regulator-boot-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml
new file mode 100644
index 0000000000..0a4c9576a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5759-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5759 High Performance DCDC Converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5759 is a high-performance, synchronous step-down DC-DC converter that
+  can deliver up to 9A output current from 3V to 6.5V input supply, The output
+  voltage can be programmable with I2C controlled 7-Bit VID.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT5759/DS5759-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5759
+      - richtek,rt5759a
+
+  reg:
+    maxItems: 1
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: auto mode (PSKIP: pulse skipping)
+        1: force pwm mode
+    items:
+      enum: [0, 1]
+
+  richtek,watchdog-enable:
+    description: enable the external watchdog reset pin listening
+    type: boolean
+
+allOf:
+  - $ref: regulator.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: richtek,rt5759
+    then:
+      properties:
+        richtek,watchdog-enable: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  # example 1 for RT5759
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@62 {
+        compatible = "richtek,rt5759";
+        reg = <0x62>;
+        regulator-name = "rt5759-buck";
+        regulator-min-microvolt = <600000>;
+        regulator-max-microvolt = <1500000>;
+        regulator-boot-on;
+      };
+    };
+  # example 2 for RT5759A
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@62 {
+        compatible = "richtek,rt5759a";
+        reg = <0x62>;
+        regulator-name = "rt5759a-buck";
+        regulator-min-microvolt = <600000>;
+        regulator-max-microvolt = <1725000>;
+        regulator-boot-on;
+        richtek,watchdog-enable;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
new file mode 100644
index 0000000000..0534b0d683
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6160 BuckBoost converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6160 is a high-efficiency buck-boost converter that can provide
+  up to 3A output current from 2025mV to 5200mV. And it support the wide
+  input voltage range from 2200mV to 5500mV.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6160
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: A connection of the 'enable' gpio line.
+    maxItems: 1
+
+  richtek,vsel-active-low:
+    description: |
+      Used to indicate the 'vsel' pin active level. if not specified, use
+      high active level as the default.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt6160@75 {
+        compatible = "richtek,rt6160";
+        reg = <0x75>;
+        enable-gpios = <&gpio26 2 0>;
+        regulator-name = "rt6160-buckboost";
+        regulator-min-microvolt = <2025000>;
+        regulator-max-microvolt = <5200000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml
new file mode 100644
index 0000000000..29f7d3d5d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6190 4-Switch BuckBoost controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6190 is 4-Switch BuckBoost controller designed for converting input
+  voltage to output voltage that can be equal to, higher or lower than input
+  voltage. It operates with wide input voltage range from 4.5V to 36V, and
+  the output voltage can be set from 3V to 36V by external FB pin. It's commonly
+  used for the application like as BuckBoost bus supply, docking station and USB
+  power delivery product.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6190
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: PSM mode (light load Power Saving Mode)
+        1: FCCM mode (Forced-CCM mode)
+    maxItems: 2
+    items:
+      enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@2c {
+        compatible = "richtek,rt6190";
+        reg = <0x2c>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
+        regulator-name = "richtek,rt6190-buckboost";
+        regulator-min-microvolt = <3000000>;
+        regulator-max-microvolt = <32000000>;
+        regulator-min-microamp = <306000>;
+        regulator-max-microamp = <12114000>;
+        regulator-allowed-modes = <0 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
new file mode 100644
index 0000000000..b73762e151
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6245 High Current Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT6245 is a high-performance, synchronous step-down converter
+  that can deliver up to 14A output current with an input supply
+  voltage range of 4.5V to 17V.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt6245
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided,
+      it will be treat as a default-on power.
+    maxItems: 1
+
+  richtek,oc-level-select:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2, 3]
+    description: |
+      Over current level selection. Each respective value means the current
+      limit 8A, 14A, 12A, 10A. If this property is missing then keep in
+      in chip default.
+
+  richtek,ot-level-select:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2]
+    description: |
+      Over temperature level selection. Each respective value means the degree
+      150'c, 130'c, 170'c. If this property is missing then keep in chip
+      default.
+
+  richtek,pgdly-time-select:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2, 3]
+    description: |
+      Power good signal delay time selection. Each respective value means the
+      delay time 0us, 10us, 20us, 40us. If this property is missing then keep
+      in chip default.
+
+
+  richtek,switch-freq-select:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2]
+    description: |
+      Buck switch frequency selection. Each respective value means 400KHz,
+      800KHz, 1200KHz. If this property is missing then keep in chip default.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt6245@34 {
+        compatible = "richtek,rt6245";
+        reg = <0x34>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulator-name = "rt6245-regulator";
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+        regulator-boot-on;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
new file mode 100644
index 0000000000..fec3d396ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTMV20 laser diode regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  Richtek RTMV20 is a load switch current regulator that can supply up to 6A.
+  It is used to drive laser diode. There're two signals for chip controls
+  (Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication.
+  There're still four pins for camera control, two inputs (strobe and vsync),
+  the others for outputs (fsin1 and fsin2). Strobe input to start the current
+  supply, vsync input from IR camera, and fsin1/fsin2 output for the optional.
+
+properties:
+  compatible:
+    const: richtek,rtmv20
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: A connection of the 'enable' gpio line.
+    maxItems: 1
+
+  richtek,ld-pulse-delay-us:
+    description: |
+      load current pulse delay in microsecond after strobe pin pulse high.
+    minimum: 0
+    maximum: 100000
+    default: 0
+
+  richtek,ld-pulse-width-us:
+    description: |
+      Load current pulse width in microsecond after strobe pin pulse high.
+    minimum: 0
+    maximum: 10000
+    default: 1200
+
+  richtek,fsin1-delay-us:
+    description: |
+      Fsin1 pulse high delay in microsecond after vsync signal pulse high.
+    minimum: 0
+    maximum: 100000
+    default: 23000
+
+  richtek,fsin1-width-us:
+    description: |
+      Fsin1 pulse high width in microsecond after vsync signal pulse high.
+    minimum: 40
+    maximum: 10000
+    default: 160
+
+  richtek,fsin2-delay-us:
+    description: |
+      Fsin2 pulse high delay in microsecond after vsync signal pulse high.
+    minimum: 0
+    maximum: 100000
+    default: 23000
+
+  richtek,fsin2-width-us:
+    description: |
+      Fsin2 pulse high width in microsecond after vsync signal pulse high.
+    minimum: 40
+    maximum: 10000
+    default: 160
+
+  richtek,es-pulse-width-us:
+    description: Eye safety function pulse width limit in microsecond.
+    minimum: 0
+    maximum: 10000
+    default: 1200
+
+  richtek,es-ld-current-microamp:
+    description: Eye safety function load current limit in microamp.
+    minimum: 0
+    maximum: 6000000
+    default: 3000000
+
+  richtek,lbp-level-microvolt:
+    description: Low battery protection level in microvolt.
+    minimum: 2400000
+    maximum: 3700000
+    default: 2700000
+
+  richtek,lbp-enable:
+    description: Low battery protection function enable control.
+    type: boolean
+
+  richtek,strobe-polarity-high:
+    description: Strobe pin active polarity control.
+    type: boolean
+
+  richtek,vsync-polarity-high:
+    description: Vsync pin active polarity control.
+    type: boolean
+
+  richtek,fsin-enable:
+    description: Fsin function enable control.
+    type: boolean
+
+  richtek,fsin-output:
+    description: Fsin function output control.
+    type: boolean
+
+  richtek,es-enable:
+    description: Eye safety function enable control.
+    type: boolean
+
+  lsw:
+    description: load switch current regulator description.
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+  - enable-gpios
+  - lsw
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtmv20@34 {
+        compatible = "richtek,rtmv20";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
+        enable-gpios = <&gpio26 3 0>;
+
+        richtek,strobe-polarity-high;
+        richtek,vsync-polarity-high;
+
+        lsw {
+                regulator-name = "rtmv20,lsw";
+                regulator-min-microamp = <0>;
+                regulator-max-microamp = <6000000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
new file mode 100644
index 0000000000..3f47e8e6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2134-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2134 SubPMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ2134 is a multi-phase, programmable power management IC that
+  integrates with four high efficient, synchronous step-down converter cores.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ2134-QA/DSQ2134-QA-01.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq2134
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck[1-3].
+
+        properties:
+          richtek,use-vsel-dvs:
+            type: boolean
+            description: |
+              If specified, buck will listen to 'vsel' pin for dvs config.
+              Else, use dvs0 voltage by default.
+
+          richtek,uv-shutdown:
+            type: boolean
+            description: |
+              If specified, use shutdown as UV action. Else, hiccup by default.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq2134@18 {
+        compatible = "richtek,rtq2134";
+        reg = <0x18>;
+
+        regulators {
+          buck1 {
+            regulator-name = "rtq2134-buck1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1850000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <550000>;
+              regulator-suspend-max-microvolt = <550000>;
+            };
+          };
+          buck2 {
+            regulator-name = "rtq2134-buck2";
+            regulator-min-microvolt = <1120000>;
+            regulator-max-microvolt = <1120000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <1120000>;
+              regulator-suspend-max-microvolt = <1120000>;
+            };
+          };
+          buck3 {
+            regulator-name = "rtq2134-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <600000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <600000>;
+              regulator-suspend-max-microvolt = <600000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
new file mode 100644
index 0000000000..609c06615b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2208 SubPMIC Regulator
+
+maintainers:
+  - Alina Yu <alina_yu@richtek.com>
+
+description: |
+  RTQ2208 is a highly integrated power converter that offers functional safety dual
+  multi-configurable synchronous buck converters and two LDOs.
+
+  Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted
+  switching operation in normal mode; the latter defines the operation in suspend to RAM mode.
+
+  No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching
+  operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous
+  conduction mode (FCCM).
+
+  The definition of modes is in the datasheet which is available in below link
+  and their meaning is::
+    0 - Auto mode for power saving, which reducing the switching frequency at light load condition
+    to maintain high frequency.
+    1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency.
+
+  Datasheet will be available soon at
+  https://www.richtek.com/assets/Products
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq2208
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    
+  richtek,mtp-sel-high:
+    type: boolean
+    description:
+      vout register selection based on this boolean value.
+      false - Using DVS0 register setting to adjust vout
+      true - Using DVS1 register setting to adjust vout
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^buck-[a-h]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          description for buck-[a-h] regulator.
+
+        properties:
+          regulator-allowed-modes:
+            description:
+              two buck modes in different switching accuracy.
+              0 - Auto mode
+              1 - FCCM
+            items:
+              enum: [0, 1]
+
+      "^ldo[1-2]$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          regulator description for ldo[1-2].
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@10 {
+        compatible = "richtek,rtq2208";
+        reg = <0x10>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        richtek,mtp-sel-high;
+
+        regulators {
+          buck-a {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-b {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-c {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-d {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-e {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-f {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-g {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          buck-h {
+            regulator-min-microvolt = <400000>;
+            regulator-max-microvolt = <2050000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-mode = <1>;
+            };
+          };
+          ldo1 {
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+            };
+          };
+          ldo2 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+            regulator-state-mem {
+              regulator-on-in-suspend;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
new file mode 100644
index 0000000000..ef62c618de
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq6752-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ6752 TFT LCD Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6752 is an I2C interface pgorammable power management IC. It includes
+  two synchronous boost converter for PAVDD, and one synchronous NAVDD
+  buck-boost. The device is suitable for automotive TFT-LCD panel.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq6752
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided, treat it as
+      external pull up.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(p|n)avdd$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+        description: |
+          regulator description for pavdd and navdd.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq6752@6b {
+        compatible = "richtek,rtq6752";
+        reg = <0x6b>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulators {
+          pavdd {
+            regulator-name = "rtq6752-pavdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+          navdd {
+            regulator-name = "rtq6752-navdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
new file mode 100644
index 0000000000..cc4ceb32e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  This module is part of the ROHM BD718215 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  The valid names for BD71815 regulator nodes are
+  buck1, buck2, buck3, buck4, buck5,
+  ldo1, ldo2, ldo3, ldo4, ldo5,
+  ldodvref, ldolpsr, wled
+
+properties:
+  wled:
+    type: object
+    description:
+      properties for wled regulator
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      regulator-name:
+        const: wled
+
+patternProperties:
+  "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$":
+    type: object
+    description:
+      Properties for single LDO/BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$"
+        description:
+          should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr"
+          for ldolpsr regulator, "ldodvref" for ldodvref reglator.
+
+      rohm,vsel-gpios:
+        description:
+          GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
+
+      rohm,dvs-run-voltage:
+        description:
+          PMIC "RUN" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at RUN state.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-snvs-voltage:
+        description:
+          Whether to keep regulator enabled at "SNVS" state or not.
+          0 means regulator should be disabled at SNVS state, non zero voltage
+          keeps regulator enabled. BD71815 does not change voltage level
+          when PMIC transitions to SNVS.SNVS voltage depends on the previous
+          state (from which the PMIC transitioned to SNVS).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-suspend-voltage:
+        description:
+          PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at SUSPEND state.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-lpsr-voltage:
+        description:
+          PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at LPSR state.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+        # Bucks 1 and 2 support giving separate voltages for operational states
+        # (RUN /CLEAN according to data-sheet) and non operational states
+        # (LPSR/SUSPEND). The voltage is automatically changed when HW
+        # state changes. Omitting these properties from bucks 1 and 2 leave
+        # buck voltages to not be toggled by HW state. Enable status may still
+        # be toggled by state changes depending on HW default settings.
+        #
+        # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here.
+        # Given RUN voltage is used at all states if regulator is enabled at
+        # given state.
+        # Values given for other states are regarded as enable/disable at
+        # given state (see below).
+        #
+        # All regulators except WLED support specifying enable/disable status
+        # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can
+        # be overridden by setting voltage to 0 (regulator disabled at given
+        # state) or non-zero (regulator enabled at given state). Please note
+        # that setting non zero voltages for bucks 1/2 will also enable voltage
+        # changes according to state change.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
new file mode 100644
index 0000000000..d898800d6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  This module is part of the ROHM BD71828 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+  The valid names for BD71828 regulator nodes are
+  BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
+  LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[1-7]$":
+    type: object
+    description:
+      Properties for single LDO regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-7]$"
+        description:
+          should be "ldo1", ..., "ldo7"
+
+    unevaluatedProperties: false
+
+  "^BUCK[1-7]$":
+    type: object
+    description:
+      Properties for single BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-7]$"
+        description:
+          should be "buck1", ..., "buck7"
+
+      rohm,dvs-run-voltage:
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-idle-voltage:
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-suspend-voltage:
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-lpsr-voltage:
+        description:
+          PMIC default "LPSR" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3300000
+
+        # Supported default DVS states:
+        #     buck       |    run     |   idle    | suspend  | lpsr
+        # --------------------------------------------------------------
+        # 1, 2, 6, and 7 | supported  | supported | supported (*)
+        # --------------------------------------------------------------
+        # 3, 4, and 5    |                    supported (**)
+        # --------------------------------------------------------------
+        #
+        # (*)  LPSR and SUSPEND states use same voltage but both states have own
+        #      enable /
+        #      disable settings. Voltage 0 can be specified for a state to make
+        #      regulator disabled on that state.
+        #
+        # (**) All states use same voltage but have own enable / disable
+        #      settings. Voltage 0 can be specified for a state to make
+        #      regulator disabled on that state.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
new file mode 100644
index 0000000000..29b350a4f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71837-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71837 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  List of regulators provided by this controller. BD71837 regulators node
+  should be sub node of the BD71837 MFD node. See BD71837 MFD bindings at
+  Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Note that if BD71837 starts at RUN state you probably want to use
+  regulator-boot-on at least for BUCK6 and BUCK7 so that those are not
+  disabled by driver at startup. LDO5 and LDO6 are supplied by those and
+  if they are disabled at startup the voltage monitoring for LDO5/LDO6 will
+  cause PMIC to reset.
+
+# The valid names for BD71837 regulator nodes are:
+# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7, BUCK8
+# LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-7]$"
+        description:
+          should be "ldo1", ..., "ldo7"
+
+    unevaluatedProperties: false
+
+  "^BUCK[1-8]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-8]$"
+        description:
+          should be "buck1", ..., "buck8"
+
+      rohm,dvs-run-voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #
+        # BD71837:
+        # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+        # ----------------------------------------------------------------
+        # 1    | supported       | supported        | supported
+        # ----------------------------------------------------------------
+        # 2    | supported       | supported        | not supported
+        # ----------------------------------------------------------------
+        # 3    | supported       | not supported    | not supported
+        # ----------------------------------------------------------------
+        # 4    | supported       | not supported    | not supported
+        # ----------------------------------------------------------------
+        # rest | not supported   | not supported    | not supported
+
+      # BD71837 power outputs can either be controlled by the PMIC internal
+      # hardware state machine or by software. If you need regulators to be
+      # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles
+      # PMIC HW state machine) - then you should set this property.
+      # Tradeoff is that then SW can't control the ON/OFF state for this
+      # regulator (other than invoking a PMIC state change).
+      rohm,no-regulator-enable-control:
+        description: |
+          Enable/Disable control of this regulator must be left to the
+          PMIC hardware state machine.
+        type: boolean
+
+      # Setups where regulator (especially the buck8) output voltage is scaled
+      # by adding external connection where some other regulator output is
+      # connected to feedback-pin (over suitable resistors) is getting popular
+      # amongst users of BD71837. (This allows for example scaling down the
+      # buck8 voltages to suit lover GPU voltages for projects where buck8 is
+      # (ab)used to supply power for GPU.
+      #
+      # So we allow describing this external connection from DT and scale the
+      # voltages accordingly. This is what the connection should look like:
+      #
+      # |---------------|
+      # |       buck 8  |-------+----->Vout
+      # |               |       |
+      # |---------------|       |
+      #        |                |
+      #        |                |
+      #        +-------+--R2----+
+      #                |
+      #                R1
+      #                |
+      #        V FB-pull-up
+      #
+      # Here the buck output is sifted according to formula:
+      #
+      # Vout_o = Vo - (Vpu - Vo)*R2/R1
+      # Linear_step = step_orig*(R1+R2)/R1
+      #
+      # where:
+      # Vout_o is adjusted voltage output at vsel reg value 0
+      # Vo is original voltage output at vsel reg value 0
+      # Vpu is the pull-up voltage V FB-pull-up in the picture
+      # R1 and R2 are resistor values.
+
+      rohm,fb-pull-up-microvolt:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used pull-up voltage before R1.
+
+      rohm,feedback-pull-up-r1-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R1 resistor.
+
+      rohm,feedback-pull-up-r2-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R2 resistor.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
new file mode 100644
index 0000000000..7ba4ccf723
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71847-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  List of regulators provided by this controller. BD71847 regulators node
+  should be sub node of the BD71847 MFD node. See BD71847 MFD bindings at
+  Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+  definition for each of these nodes is defined using the standard
+  binding for regulators at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+  Note that if BD71847 starts at RUN state you probably want to use
+  regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must
+  not be disabled by driver at startup. If BUCK5 is disabled at startup the
+  voltage monitoring for LDO5/LDO6 can cause PMIC to reset.
+
+# The valid names for BD71847 regulator nodes are:
+# BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
+# LDO1, LDO2, LDO3, LDO4, LDO5, LDO6
+
+patternProperties:
+  "^LDO[1-6]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-6]$"
+        description:
+          should be "ldo1", ..., "ldo6"
+
+    unevaluatedProperties: false
+
+  "^BUCK[1-6]$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-6]$"
+        description:
+          should be "buck1", ..., "buck6"
+
+      rohm,dvs-run-voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #
+        # BD71847:
+        # buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage
+        # ----------------------------------------------------------------
+        # 1    | supported       | supported        | supported
+        # ----------------------------------------------------------------
+        # 2    | supported       | supported        | not supported
+        # ----------------------------------------------------------------
+        # rest | not supported   | not supported    | not supported
+
+      # BD718(47/50) power outputs can either be controlled by the PMIC internal
+      # hardware state machine or by software. If you need regulators to be
+      # turned ON/OFF for example based on PMIC_STBY_REQ line (which toggles
+      # PMIC HW state machine) - then you should set this property.
+      # Tradeoff is that then SW can't control the ON/OFF state for this
+      # regulator (other than invoking a PMIC state change).
+      rohm,no-regulator-enable-control:
+        description: |
+          Enable/Disable control of this regulator must be left to the
+          PMIC hardware state machine.
+        type: boolean
+
+      # Setups where regulator (especially the buck8) output voltage is scaled
+      # by adding external connection where some other regulator output is
+      # connected to feedback-pin (over suitable resistors) is getting popular
+      # amongst users of BD71837. (This allows for example scaling down the
+      # buck8 voltages to suit lover GPU voltages for projects where buck8 is
+      # (ab)used to supply power for GPU.
+      #
+      # So we allow describing this external connection from DT and scale the
+      # voltages accordingly. This is what the connection should look like:
+      #
+      # |---------------|
+      # |       buck 8  |-------+----->Vout
+      # |               |       |
+      # |---------------|       |
+      #        |                |
+      #        |                |
+      #        +-------+--R2----+
+      #                |
+      #                R1
+      #                |
+      #        V FB-pull-up
+      #
+      # Here the buck output is sifted according to formula:
+      #
+      # Vout_o = Vo - (Vpu - Vo)*R2/R1
+      # Linear_step = step_orig*(R1+R2)/R1
+      #
+      # where:
+      # Vout_o is adjusted voltage output at vsel reg value 0
+      # Vo is original voltage output at vsel reg value 0
+      # Vpu is the pull-up voltage V FB-pull-up in the picture
+      # R1 and R2 are resistor values.
+
+      rohm,fb-pull-up-microvolt:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used pull-up voltage before R1.
+
+      rohm,feedback-pull-up-r1-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R1 resistor.
+
+      rohm,feedback-pull-up-r2-ohms:
+        description:
+          Feedback-pin has pull-up connection to adjust voltage range. This is
+          the used R2 resistor.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
new file mode 100644
index 0000000000..f573128da0
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd9576-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9576 and BD9573 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  This module is part of the ROHM BD9576 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  The valid names for BD9576 regulator nodes are
+  regulator-vd50, regulator-vd18, regulator-vdddr, regulator-vd10,
+  regulator-voutl1, regulator-vouts1
+
+patternProperties:
+  "^regulator-.+$":
+    type: object
+    description:
+      Properties for single regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      rohm,ocw-fet-ron-micro-ohms:
+        description: |
+          External FET's ON-resistance. Required if VoutS1 OCP/OCW is
+          to be set.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
new file mode 100644
index 0000000000..0f9eb317ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPA01 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for
+  additional information and example.
+
+patternProperties:
+  # 26 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-6])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-ramp-delay:
+        enum: [0, 6250, 12500, 25000, 50000]
+        default: 12500
+        description: |
+          May be 0 for disabling the ramp delay on BUCK{1,2,3,4}.
+
+          In the absence of the regulator-ramp-delay property, the default ramp
+          delay will be used.
+
+          Note: Some bucks share the ramp rate setting i.e. same ramp value
+          will be set for a particular group of bucks so provide the same
+          regulator-ramp-delay value for them.
+          Groups sharing ramp rate:
+            * buck{1,6},
+            * buck{2,4},
+            * buck{8,9,10}.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
new file mode 100644
index 0000000000..f1c50dcd0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS11 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 38 LDOs
+  "^LDO([1-9]|[1-2][0-9]|3[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
new file mode 100644
index 0000000000..53b105a4ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps13.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS13 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS13 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 40 LDOs
+  "^LDO([1-9]|[1-3][0-9]|40)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
new file mode 100644
index 0000000000..a7feb497eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps14.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS14 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS14 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 25 LDOs, without LDO10-12
+  "^LDO([1-9]|1[3-9]|2[0-5])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  "^LDO(1[0-2])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      samsung,ext-control-gpios:
+        maxItems: 1
+        description:
+          LDO10, LDO11 and LDO12 can be configured to external control over
+          GPIO.
+
+    required:
+      - regulator-name
+
+  # 5 bucks
+  "^BUCK[1-5]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
new file mode 100644
index 0000000000..9576c2df45
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mps15.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS15 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS15 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 27 LDOs
+  "^LDO([1-9]|[1][0-9]|2[0-7])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 10 bucks
+  "^BUCK([1-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
new file mode 100644
index 0000000000..39b652c3c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpu02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPU02 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPU02 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+patternProperties:
+  # 28 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    required:
+      - regulator-name
+
+  # 7 bucks
+  "^BUCK[1-7]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
new file mode 100644
index 0000000000..172631ca3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S5M8767 provides buck and LDO regulators.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
+  additional information and example.
+
+patternProperties:
+  # 28 LDOs
+  "^LDO([1-9]|1[0-9]|2[0-8])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the LDO's with power mode
+          change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+    required:
+      - regulator-name
+
+  # 8 bucks
+  "^BUCK[1-8]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the regulator with power
+          mode change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+    required:
+      - regulator-name
+
+properties:
+  # 9 buck
+  BUCK9:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      op_mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+        description: |
+          Describes the different operating modes of the regulator with power
+          mode change in SOC. The different possible values are:
+            0 - always off mode
+            1 - on in normal mode
+            2 - low power mode
+            3 - suspend mode
+
+      s5m8767,pmic-ext-control-gpios:
+        maxItems: 1
+        description: |
+          GPIO specifier for one GPIO controlling this regulator on/off.
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
new file mode 100644
index 0000000000..c3a902e11b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8106a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silergy SY8106A Voltage Regulator
+
+maintainers:
+  - Ondrej Jirman <megous@megous.com>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: silergy,sy8106a
+
+  reg:
+    maxItems: 1
+
+  silergy,fixed-microvolt:
+    description: >
+      The voltage when I2C regulating is disabled (set by external resistor
+      like a fixed voltage)
+
+required:
+  - compatible
+  - reg
+  - silergy,fixed-microvolt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@65 {
+            compatible = "silergy,sy8106a";
+            reg = <0x65>;
+            regulator-name = "sy8106a-vdd";
+            silergy,fixed-microvolt = <1200000>;
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+            regulator-always-on;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml
new file mode 100644
index 0000000000..82af4d6561
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8824x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8824x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy8824c,sy8824e,sy20276 and sy20278 PMIC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy8824c
+      - silergy,sy8824e
+      - silergy,sy20276
+      - silergy,sy20278
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@60 {
+          compatible = "silergy,sy8824c";
+          regulator-min-microvolt = <800000>;
+          regulator-max-microvolt = <1150000>;
+          reg = <0x60>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml
new file mode 100644
index 0000000000..b222adabc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/silergy,sy8827n.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy8827n PMIC
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy8827n
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to enable/disable the regulator.
+    maxItems: 1
+
+  silergy,vsel-state-high:
+    type: boolean
+    description:
+      Indicates if the VSEL pin is set to high.
+      If this property is missing, assume the VSEL pin is set to low.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@60 {
+          compatible = "silergy,sy8827n";
+          reg = <0x60>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
new file mode 100644
index 0000000000..9d84117530
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Mitus SM5703 multi function device regulators
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
+  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
+  Regulator nodes should be named as USBLDO_<number>, BUCK, VBUS, LDO_<number>.
+  The definition for each of these nodes is defined using the standard
+  binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+properties:
+  buck:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the BUCK regulator.
+
+  vbus:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the VBUS regulator.
+
+patternProperties:
+  "^ldo[1-3]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+  "^usbldo[1-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single USBLDO regulator.
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
new file mode 100644
index 0000000000..f9acbc1f3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
@@ -0,0 +1,18 @@
+SKY81452 voltage regulator
+
+Required properties:
+- regulator node named lout.
+- any required generic properties defined in regulator.txt
+
+Optional properties:
+- any available generic properties defined in regulator.txt
+
+Example:
+
+	regulator {
+		lout {
+			regulator-name = "sky81452-lout";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <8000000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
new file mode 100644
index 0000000000..ddaa112252
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+  This regulator controls VBUS and belongs to USB3 glue layer. Before using
+  the regulator, it is necessary to control the clocks and resets to enable
+  this layer. These clocks and resets should be described in each property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+# USB3 Controller
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-regulator
+      - socionext,uniphier-pro5-usb3-regulator
+      - socionext,uniphier-pxs2-usb3-regulator
+      - socionext,uniphier-ld20-usb3-regulator
+      - socionext,uniphier-pxs3-usb3-regulator
+      - socionext,uniphier-nx1-usb3-regulator
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+allOf:
+  - $ref: regulator.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-regulator
+              - socionext,uniphier-pro5-usb3-regulator
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb_vbus0: regulators@100 {
+        compatible = "socionext,uniphier-ld20-usb3-regulator";
+        reg = <0x100 0x10>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
+    };
diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt
new file mode 100644
index 0000000000..63dc07877c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt
@@ -0,0 +1,43 @@
+Spreadtrum SC2731 Voltage regulators
+
+The SC2731 integrates low-voltage and low quiescent current DCDC/LDO.
+14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have
+their own bypass (power-down) control signals. External tantalum or MLCC
+ceramic capacitors are recommended to use with these LDOs.
+
+Required properties:
+ - compatible: should be "sprd,sc27xx-regulator".
+
+List of regulators provided by this controller. It is named according to
+its regulator type, BUCK_<name> and LDO_<name>. The definition for each
+of these nodes is defined using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are:
+BUCK:
+	BUCK_CPU0, BUCK_CPU1, BUCK_RF
+LDO:
+	LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE,
+	LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON,
+	LDO_CAMIO, LDO_SRAM
+
+Example:
+	regulators {
+		compatible = "sprd,sc27xx-regulator";
+
+		vddarm0: BUCK_CPU0 {
+			regulator-name = "vddarm0";
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1996875>;
+			regulator-ramp-delay = <25000>;
+			regulator-always-on;
+		};
+
+		vddcama0: LDO_CAMA0 {
+			regulator-name = "vddcama0";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3750000>;
+			regulator-enable-ramp-delay = <100>;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
new file mode 100644
index 0000000000..c863100f6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 booster for ADC analog input switches
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+description: |
+  Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
+  to supply ADC analog input switches.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-booster
+      - st,stm32mp1-booster
+
+  st,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to system configuration controller.
+
+  vdda-supply:
+    description: phandle to the vdda input analog voltage.
+
+required:
+  - compatible
+  - st,syscfg
+  - vdda-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator-booster {
+      compatible = "st,stm32mp1-booster";
+      st,syscfg = <&syscfg>;
+      vdda-supply = <&vdda>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
new file mode 100644
index 0000000000..05f4ad2c7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Voltage reference buffer
+
+description: |
+  Some STM32 devices embed a voltage reference buffer which can be used as
+  voltage reference for ADCs, DACs and also as voltage reference for external
+  components through the dedicated VREF+ pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: st,stm32-vrefbuf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdda-supply:
+    description: phandle to the vdda input analog voltage.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdda-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    vrefbuf@50025000 {
+      compatible = "st,stm32-vrefbuf";
+      reg = <0x50025000 0x8>;
+      regulator-min-microvolt = <1500000>;
+      regulator-max-microvolt = <2500000>;
+      clocks = <&rcc VREF>;
+      vdda-supply = <&vdda>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
new file mode 100644
index 0000000000..c9586d277f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP1 PWR voltage regulators
+
+maintainers:
+  - Pascal Paillet <p.paillet@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1,pwr-reg
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Input supply phandle(s) for vdd input
+
+  vdd_3v3_usbfs-supply:
+    description: Input supply phandle(s) for vdd_3v3_usbfs input
+
+patternProperties:
+  "^(reg11|reg18|usb33)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pwr@50001000 {
+      compatible = "st,stm32mp1,pwr-reg";
+      reg = <0x50001000 0x10>;
+      vdd-supply = <&vdd>;
+      vdd_3v3_usbfs-supply = <&vdd_usb>;
+
+      reg11 {
+        regulator-name = "reg11";
+        regulator-min-microvolt = <1100000>;
+        regulator-max-microvolt = <1100000>;
+      };
+
+      reg18 {
+        regulator-name = "reg18";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+      };
+
+      usb33 {
+        regulator-name = "usb33";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
new file mode 100644
index 0000000000..90c39275c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6236x Voltage Regulators
+
+maintainers:
+  - Laxman Dewangan <ldewangan@nvidia.com>
+
+description: |
+  The TPS6236x are a family of step down dc-dc converter with
+  an input voltage range of 2.5V to 5.5V. The devices provide
+  up to 3A peak load current, and an output voltage range of
+  0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps62360
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62360
+      - ti,tps62361
+      - ti,tps62362
+      - ti,tps62363
+
+  reg:
+    maxItems: 1
+
+  ti,vsel0-gpio:
+    description: |
+      GPIO for controlling VSEL0 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL0 control.
+    maxItems: 1
+
+  ti,vsel1-gpio:
+    description: |
+      GPIO for controlling VSEL1 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL1 control.
+    maxItems: 1
+
+  ti,enable-vout-discharge:
+    description: Enable output discharge.
+    type: boolean
+
+  ti,enable-pull-down:
+    description: Enable pull down.
+    type: boolean
+
+  ti,vsel0-state-high:
+    description: |
+      Initial state of VSEL0 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+  ti,vsel1-state-high:
+    description: |
+      Initial state of VSEL1 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@60 {
+            compatible = "ti,tps62361";
+            reg = <0x60>;
+            regulator-name = "tps62361-vout";
+            regulator-min-microvolt = <500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-boot-on;
+            ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+            ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            ti,vsel0-state-high;
+            ti,vsel1-state-high;
+            ti,enable-pull-down;
+            ti,enable-vout-discharge;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
new file mode 100644
index 0000000000..0f29c75f42
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62864.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS62864/TPS6286/TPS62868/TPS62869 voltage regulator
+
+maintainers:
+  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62864
+      - ti,tps62866
+      - ti,tps62868
+      - ti,tps62869
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      "SW":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/ti,tps62864.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@48 {
+        compatible = "ti,tps62864";
+        reg = <0x48>;
+
+        regulators {
+          SW {
+            regulator-name = "+0.85V";
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <890000>;
+            regulator-initial-mode = <TPS62864_MODE_FPWM>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml
new file mode 100644
index 0000000000..386989544d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62870.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62870.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS62870/TPS62871/TPS62872/TPS62873 voltage regulator
+
+maintainers:
+  - Mårten Lindahl <marten.lindahl@axis.com>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62870
+      - ti,tps62871
+      - ti,tps62872
+      - ti,tps62873
+
+  reg:
+    maxItems: 1
+
+  regulator-initial-mode:
+    enum: [ 1, 2 ]
+    description: 1 - Forced PWM mode, 2 - Low power mode
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@41 {
+        compatible = "ti,tps62873";
+        reg = <0x41>;
+        regulator-name = "+0.75V";
+        regulator-min-microvolt = <400000>;
+        regulator-max-microvolt = <1675000>;
+        regulator-initial-mode = <1>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
new file mode 100644
index 0000000000..78e64521d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI tps65219 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Jerome Neanne <jerome.neanne@baylibre.com>
+
+description: |
+  Regulator nodes should be named to buck<number> and ldo<number>.
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65219
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    type: boolean
+    description: Optional property that indicates that this device is
+      controlling system power.
+
+  interrupts:
+    description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 1
+
+  ti,power-button:
+    type: boolean
+    description: |
+      Optional property that sets the EN/PB/VSENSE pin to be a
+      power-button.
+      TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either
+      1. EN in which case it functions as an enable pin.
+      2. VSENSE which compares the voltages and triggers an automatic
+      on/off request.
+      3. PB in which case it can be configured to trigger an interrupt
+      to the SoC.
+      ti,power-button reflects the last one of those options
+      where the board has a button wired to the pin and triggers
+      an interrupt on pressing it.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck[1-3]-supply$":
+    description: Input supply phandle of one regulator.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle of one regulator.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps65219: pmic@30 {
+            compatible = "ti,tps65219";
+            reg = <0x30>;
+            buck1-supply = <&vcc_3v3_sys>;
+            buck2-supply = <&vcc_3v3_sys>;
+            buck3-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&buck2_reg>;
+            ldo3-supply = <&vcc_3v3_sys>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            pinctrl-0 = <&pmic_irq_pins_default>;
+
+            interrupt-parent = <&gic500>;
+            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+            ti,power-button;
+
+            regulators {
+                buck1_reg: buck1 {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "VCC1V8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "VDD_LPDDR4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1_reg: ldo1 {
+                    regulator-name = "VDDSHV_SD_IO_PMIC";
+                    regulator-min-microvolt = <33000000>;
+                    regulator-max-microvolt = <33000000>;
+                };
+
+                ldo2_reg: ldo2 {
+                    regulator-name = "VDDAR_CORE";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3_reg: ldo3 {
+                    regulator-name = "VDDA_1V8";
+                    regulator-min-microvolt = <18000000>;
+                    regulator-max-microvolt = <18000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4_reg: ldo4 {
+                    regulator-name = "VDD_PHY_2V5";
+                    regulator-min-microvolt = <25000000>;
+                    regulator-max-microvolt = <25000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
new file mode 100644
index 0000000000..6a23ad9ac5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt
@@ -0,0 +1,132 @@
+Adaptive Body Bias(ABB) SoC internal LDO regulator for Texas Instruments SoCs
+
+Required Properties:
+- compatible: Should be one of:
+  - "ti,abb-v1" for older SoCs like OMAP3
+  - "ti,abb-v2" for newer SoCs like OMAP4, OMAP5
+  - "ti,abb-v3" for a generic definition where setup and control registers are
+     provided (example: DRA7)
+- reg: Address and length of the register set for the device. It contains
+  the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+  - "base-address"	- contains base address of ABB module (ti,abb-v1,ti,abb-v2)
+  - "control-address"	- contains control register address of ABB module (ti,abb-v3)
+  - "setup-address"	- contains setup register address of ABB module (ti,abb-v3)
+  - "int-address"	- contains address of interrupt register for ABB module
+  (also see Optional properties)
+- #address-cells: should be 0
+- #size-cells: should be 0
+- clocks: should point to the clock node used by ABB module
+- ti,settling-time: Settling time in uSecs from SoC documentation for ABB module
+	to settle down(target time for SR2_WTCNT_VALUE).
+- ti,clock-cycles: SoC specific data about count of system ti,clock-cycles used for
+	computing settling time from SoC Documentation for ABB module(clock
+	cycles for SR2_WTCNT_VALUE).
+- ti,tranxdone-status-mask: Mask to the int-register to write-to-clear mask
+	indicating LDO tranxdone (operation complete).
+- ti,abb_info: An array of 6-tuples u32 items providing information about ABB
+	configuration needed per operational voltage of the device.
+	Each item consists of the following in the same order:
+	volt: voltage in uV - Only used to index ABB information.
+	ABB mode: one of the following:
+		0-bypass
+		1-Forward Body Bias(FBB)
+		3-Reverse Body Bias(RBB)
+	efuse:	(see Optional properties)
+	RBB enable efuse Mask:	(See Optional properties)
+	FBB enable efuse Mask:	(See Optional properties)
+	Vset value efuse Mask:	(See Optional properties)
+
+	NOTE: If more than 1 entry is present, then regulator is setup to change
+	      voltage, allowing for various modes to be selected indexed off
+	      the regulator. Further, ABB LDOs are considered always-on by
+	      default.
+
+Optional Properties:
+- reg-names: In addition to the required properties, the following are optional
+  - "efuse-address"	- Contains efuse base address used to pick up ABB info.
+  - "ldo-address"	- Contains address of ABB LDO override register.
+	"efuse-address" is required for this.
+- ti,ldovbb-vset-mask	- Required if ldo-address is set, mask for LDO override
+	register to provide override vset value.
+- ti,ldovbb-override-mask - Required if ldo-address is set, mask for LDO
+	override register to enable override vset value.
+- ti,abb_opp_sel: Addendum to the description in required properties
+	efuse: Mandatory if 'efuse-address' register is defined. Provides offset
+	       from efuse-address to pick up ABB characteristics. Set to 0 if
+	       'efuse-address' is not defined.
+	RBB enable efuse Mask:	Optional if 'efuse-address' register is defined.
+		'ABB mode' is force set to RBB mode if value at "efuse-address"
+		+ efuse maps to RBB mask. Set to 0 to ignore this.
+	FBB enable efuse Mask:	Optional if 'efuse-address' register is defined.
+		'ABB mode' is force set to FBB mode if value at "efuse-address"
+		+ efuse maps to FBB mask (valid only if RBB mask does not match)
+		Set to 0 to ignore this.
+	Vset value efuse Mask:	Mandatory if ldo-address is set. Picks up from
+		efuse the value to set in 'ti,ldovbb-vset-mask' at ldo-address.
+
+Example #1: Simplest configuration (no efuse data, hard coded ABB table):
+abb_x: regulator-abb-x {
+	compatible = "ti,abb-v1";
+	regulator-name = "abb_x";
+	#address-cells = <0>;
+	#size-cells = <0>;
+	reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+	reg-names = "base-address", "int-address";
+	ti,tranxdone-status-mask = <0x4000000>;
+	clocks = <&sysclk>;
+	ti,settling-time = <30>;
+	ti,clock-cycles = <8>;
+	ti,abb_info = <
+	/* uV		ABB	efuse	rbb_m	fbb_m	vset_m */
+	1012500		0	0	0	0	0 /* Bypass */
+	1200000		3	0	0	0	0 /* RBB mandatory */
+	1320000		1	0	0	0	0 /* FBB mandatory */
+	>;
+};
+
+Example #2: Efuse bits contain ABB mode setting (no LDO override capability)
+abb_y: regulator-abb-y {
+	compatible = "ti,abb-v2";
+	regulator-name = "abb_y";
+	#address-cells = <0>;
+	#size-cells = <0>;
+	reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, <0x4A002268 0x8>;
+	reg-names = "base-address", "int-address", "efuse-address";
+	ti,tranxdone-status-mask = <0x4000000>;
+	clocks = <&sysclk>;
+	ti,settling-time = <50>;
+	ti,clock-cycles = <16>;
+	ti,abb_info = <
+	/* uV		ABB	efuse	rbb_m	fbb_m	vset_m */
+	975000		0	0	0	0	0 /* Bypass */
+	1012500		0	0	0x40000	0	0 /* RBB optional */
+	1200000		0	0x4	0	0x40000	0 /* FBB optional */
+	1320000		1	0	0	0	0 /* FBB mandatory */
+	>;
+};
+
+Example #3: Efuse bits contain ABB mode setting and LDO override capability
+abb_z: regulator-abb-z {
+	compatible = "ti,abb-v2";
+	regulator-name = "abb_z";
+	#address-cells = <0>;
+	#size-cells = <0>;
+	reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+	      <0x4a002194 0x8>, <0x4ae0C314 0x4>;
+	reg-names = "base-address", "int-address",
+		    "efuse-address", "ldo-address";
+	ti,tranxdone-status-mask = <0x8000000>;
+	/* LDOVBBMM_MUX_CTRL */
+	ti,ldovbb-override-mask = <0x400>;
+	/* LDOVBBMM_VSET_OUT */
+	ti,ldovbb-vset-mask = <0x1F>;
+	clocks = <&sysclk>;
+	ti,settling-time = <50>;
+	ti,clock-cycles = <16>;
+	ti,abb_info = <
+	/* uV	ABB	efuse	rbb_m	fbb_m	vset_m */
+	975000	0	0	0	0	0	/* Bypass */
+	1200000	0	0x4	0	0x40000	0x1f00	/* FBB optional, vset */
+	>;
+};
diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
new file mode 100644
index 0000000000..2f7e44a964
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
@@ -0,0 +1,27 @@
+TPS51632 Voltage regulators
+
+Required properties:
+- compatible: Must be "ti,tps51632"
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
+- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
+	will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
+	step is 10mV as per datasheet.
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+	tps51632 {
+		compatible = "ti,tps51632";
+		reg =  <0x43>;
+		regulator-name = "tps51632-vout";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		ti,enable-pwm-dvfs;
+		ti,dvfs-step-20mV;
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65023.txt b/Documentation/devicetree/bindings/regulator/tps65023.txt
new file mode 100644
index 0000000000..a4714e4da3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65023.txt
@@ -0,0 +1,60 @@
+TPS65023 family of regulators
+
+Required properties:
+- compatible: Must be one of the following.
+	"ti,tps65020",
+	"ti,tps65021",
+	"ti,tps65023",
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: VDCDC[1-3] and LDO[1-2]
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. The definition for each of
+  these nodes is defined using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			VDCDC1 {
+				regulator-name = "vdd_mpu";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			VDCDC2 {
+				regulator-name = "vdd_core";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			VDCDC3 {
+				regulator-name = "vdd_io";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "vdd_usb18";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO2 {
+				regulator-name = "vdd_usb33";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt
new file mode 100644
index 0000000000..ae326f2635
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65090.txt
@@ -0,0 +1,126 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled then this property should be there.
+- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+  If DCDCs are externally controlled and if it is from GPIO then GPIO
+  number should be provided. If it is externally controlled and no GPIO
+  entry then driver will just configure this rails as external control
+  and will not provide any enable/disable APIs.
+- ti,overcurrent-wait: This is applicable to FET registers, which have a
+  poorly defined "overcurrent wait" field.  If this property is present it
+  should be between 0 - 3.  If this property isn't present we won't touch the
+  "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65090@48 {
+		compatible = "ti,tps65090";
+		reg = <0x48>;
+		interrupts = <0 88 0x4>;
+
+		vsys1-supply = <&some_reg>;
+		vsys2-supply = <&some_reg>;
+		vsys3-supply = <&some_reg>;
+		infet1-supply = <&some_reg>;
+		infet2-supply = <&some_reg>;
+		infet3-supply = <&some_reg>;
+		infet4-supply = <&some_reg>;
+		infet5-supply = <&some_reg>;
+		infet6-supply = <&some_reg>;
+		infet7-supply = <&some_reg>;
+		vsys-l1-supply = <&some_reg>;
+		vsys-l2-supply = <&some_reg>;
+
+		regulators {
+			dcdc1 {
+				regulator-name = "dcdc1";
+				regulator-boot-on;
+				regulator-always-on;
+				ti,enable-ext-control;
+				dcdc-ext-control-gpios = <&gpio 10 0>;
+			};
+
+			dcdc2 {
+				regulator-name = "dcdc2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc3 {
+				regulator-name = "dcdc3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet1 {
+				regulator-name = "fet1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet2 {
+				regulator-name = "fet2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet3 {
+				regulator-name = "fet3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet4 {
+				regulator-name = "fet4";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet5 {
+				regulator-name = "fet5";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet6 {
+				regulator-name = "fet6";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			fet7 {
+				regulator-name = "fet7";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
new file mode 100644
index 0000000000..3a3505520c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
@@ -0,0 +1,46 @@
+TPS65132 regulators
+
+Required properties:
+- compatible: "ti,tps65132"
+- reg: I2C slave address
+
+Optional Subnode:
+Device supports two regulators OUTP and OUTN. A sub node within the
+   device node describe the properties of these regulators. The sub-node
+   names must be as follows:
+	-For regulator outp, the sub node name should be "outp".
+	-For regulator outn, the sub node name should be "outn".
+
+-enable-gpios:(active high, output) Regulators are controlled by the input pins.
+   If it is connected to GPIO through host system then provide the
+   gpio number as per gpio.txt.
+-active-discharge-gpios: (active high, output) Some configurations use delay mechanisms
+  on the enable pin, to keep the regulator enabled for some time after
+  the enable signal goes low. This GPIO is used to actively discharge
+  the delay mechanism. Requires specification of ti,active-discharge-time-us
+-ti,active-discharge-time-us: how long the active discharge gpio should be
+  asserted for during active discharge, in microseconds.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65132@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+
+		outp {
+			regulator-name = "outp";
+			regulator-boot-on;
+			regulator-always-on;
+			enable-gpios = <&gpio 23 0>;
+		};
+
+		outn {
+			regulator-name = "outn";
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-active-discharge = <0>;
+			enable-gpios = <&gpio 40 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
new file mode 100644
index 0000000000..4f05d208c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -0,0 +1,78 @@
+TPS65217 family of regulators
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+  after their hardware counterparts: dcdc[1-3] and ldo[1-4]
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle.
+
+  The valid names for regulators are:
+  tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps: tps@24 {
+		compatible = "ti,tps65217";
+		ti,pmic-shutdown-controller;
+
+		regulators {
+			dcdc1_reg: dcdc1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc2_reg: dcdc2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			dcdc3_reg: dcc3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
new file mode 100644
index 0000000000..54aded3b78
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
@@ -0,0 +1,83 @@
+TPS65218 family of regulators
+
+Required properties:
+- compatible: "ti,tps65218"
+- reg: I2C slave address
+
+- List of regulators provided by this controller, must be named
+  after their hardware counterparts: dcdc[1-6] and ldo1
+- This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at ./regulator.txt.
+
+  The valid names for regulators are:
+  tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
+  regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3.
+  Each regulator is defined using the standard binding for regulators.
+
+Example:
+tps65218: tps65218@24 {
+	reg = <0x24>;
+	compatible = "ti,tps65218";
+	interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	dcdc1: regulator-dcdc1 {
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1144000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc2: regulator-dcdc2 {
+		regulator-name = "vdd_mpu";
+		regulator-min-microvolt = <912000>;
+		regulator-max-microvolt = <1378000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc3: regulator-dcdc3 {
+		regulator-name = "vdcdc3";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc5: regulator-dcdc5 {
+		regulator-name = "v1_0bat";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	dcdc6: regulator-dcdc6 {
+		regulator-name = "v1_8bat";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ldo1: regulator-ldo1 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ls2: regulator-ls2 {
+		regulator-min-microamp = <100000>;
+		regulator-max-microamp = <1000000>;
+	};
+
+	ls3: regulator-ls3 {
+		regulator-min-microamp = <100000>;
+		regulator-max-microamp = <1000000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt
new file mode 100644
index 0000000000..8b40cac24d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt
@@ -0,0 +1,135 @@
+TPS6586x family of regulators
+
+Required properties:
+- compatible: "ti,tps6586x"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO
+- gpio-controller: mark the device as a GPIO controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name (or the deprecated
+  regulator-compatible property if present), with valid values listed below.
+  The content of each sub-node is defined by the standard binding for
+  regulators; see regulator.txt.
+  sys, sm[0-2], ldo[0-9] and ldo_rtc
+- sys-supply: The input supply for SYS.
+- vin-sm0-supply: The input supply for the SM0.
+- vin-sm1-supply: The input supply for the SM1.
+- vin-sm2-supply: The input supply for the SM2.
+- vinldo01-supply: The input supply for the LDO1 and LDO2
+- vinldo23-supply: The input supply for the LDO2 and LDO3
+- vinldo4-supply: The input supply for the LDO4
+- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
+- vinldo9-supply: The input supply for the LDO9
+
+Optional properties:
+- ti,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+
+Each regulator is defined using the standard binding for regulators.
+
+Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver
+      take care of making proper parent child relationship.
+
+Example:
+
+	pmu: tps6586x@34 {
+		compatible = "ti,tps6586x";
+		reg = <0x34>;
+		interrupts = <0 88 0x4>;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		ti,system-power-controller;
+
+		sys-supply = <&some_reg>;
+		vin-sm0-supply = <&some_reg>;
+		vin-sm1-supply = <&some_reg>;
+		vin-sm2-supply = <&some_reg>;
+		vinldo01-supply = <...>;
+		vinldo23-supply = <...>;
+		vinldo4-supply = <...>;
+		vinldo678-supply = <...>;
+		vinldo9-supply = <...>;
+
+		regulators {
+			sys_reg: sys {
+				regulator-name = "vdd_sys";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm0_reg: sm0 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm1_reg: sm1 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sm2_reg: sm2 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <4550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo0_reg: ldo0 {
+				regulator-name = "PCIE CLK";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = < 725000>;
+				regulator-max-microvolt = <1500000>;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2475000>;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
new file mode 100644
index 0000000000..549f80436d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
@@ -0,0 +1,80 @@
+TWL family of regulators
+
+Required properties:
+For twl6030 regulators/LDOs
+- compatible:
+  - "ti,twl6030-vaux1" for VAUX1 LDO
+  - "ti,twl6030-vaux2" for VAUX2 LDO
+  - "ti,twl6030-vaux3" for VAUX3 LDO
+  - "ti,twl6030-vmmc" for VMMC LDO
+  - "ti,twl6030-vpp" for VPP LDO
+  - "ti,twl6030-vusim" for VUSIM LDO
+  - "ti,twl6030-vana" for VANA LDO
+  - "ti,twl6030-vcxio" for VCXIO LDO
+  - "ti,twl6030-vdac" for VDAC LDO
+  - "ti,twl6030-vusb" for VUSB LDO
+  - "ti,twl6030-v1v8" for V1V8 LDO
+  - "ti,twl6030-v2v1" for V2V1 LDO
+  - "ti,twl6030-vdd1" for VDD1 SMPS
+  - "ti,twl6030-vdd2" for VDD2 SMPS
+  - "ti,twl6030-vdd3" for VDD3 SMPS
+For twl6032 regulators/LDOs
+- compatible:
+  - "ti,twl6032-ldo1" for LDO1 LDO
+  - "ti,twl6032-ldo2" for LDO2 LDO
+  - "ti,twl6032-ldo3" for LDO3 LDO
+  - "ti,twl6032-ldo4" for LDO4 LDO
+  - "ti,twl6032-ldo5" for LDO5 LDO
+  - "ti,twl6032-ldo6" for LDO6 LDO
+  - "ti,twl6032-ldo7" for LDO7 LDO
+  - "ti,twl6032-ldoln" for LDOLN LDO
+  - "ti,twl6032-ldousb" for LDOUSB LDO
+  - "ti,twl6032-smps3" for SMPS3 SMPS
+  - "ti,twl6032-smps4" for SMPS4 SMPS
+  - "ti,twl6032-vio" for VIO SMPS
+For twl4030 regulators/LDOs
+- compatible:
+  - "ti,twl4030-vaux1" for VAUX1 LDO
+  - "ti,twl4030-vaux2" for VAUX2 LDO
+  - "ti,twl5030-vaux2" for VAUX2 LDO
+  - "ti,twl4030-vaux3" for VAUX3 LDO
+  - "ti,twl4030-vaux4" for VAUX4 LDO
+  - "ti,twl4030-vmmc1" for VMMC1 LDO
+  - "ti,twl4030-vmmc2" for VMMC2 LDO
+  - "ti,twl4030-vpll1" for VPLL1 LDO
+  - "ti,twl4030-vpll2" for VPLL2 LDO
+  - "ti,twl4030-vsim" for VSIM LDO
+  - "ti,twl4030-vdac" for VDAC LDO
+  - "ti,twl4030-vintana2" for VINTANA2 LDO
+  - "ti,twl4030-vio" for VIO LDO
+  - "ti,twl4030-vdd1" for VDD1 SMPS
+  - "ti,twl4030-vdd2" for VDD2 SMPS
+  - "ti,twl4030-vintana1" for VINTANA1 LDO
+  - "ti,twl4030-vintdig" for VINTDIG LDO
+  - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
+  - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
+  - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+For twl4030 regulators/LDOs:
+ - regulator-initial-mode:
+  - 0x08 - Sleep mode, the nominal output voltage is maintained with low power
+           consumption with low load current capability.
+  - 0x0e - Active mode, the regulator can deliver its nominal output voltage
+           with full-load current capability.
+
+Example:
+
+	xyz: regulator@0 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt  = <1000000>;
+		regulator-max-microvolt  = <3000000>;
+	};
+
+For twl6030 regulators/LDOs:
+
+ - ti,retain-on-reset: Does not turn off the supplies during warm
+                       reset. Could be needed for VMMC, as TWL6030
+                       reset sequence for this signal does not comply
+                       with the SD specification.
diff --git a/Documentation/devicetree/bindings/regulator/vctrl.txt b/Documentation/devicetree/bindings/regulator/vctrl.txt
new file mode 100644
index 0000000000..e940377cfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vctrl.txt
@@ -0,0 +1,49 @@
+Bindings for Voltage controlled regulators
+==========================================
+
+Required properties:
+--------------------
+- compatible		  : must be "vctrl-regulator".
+- regulator-min-microvolt : smallest voltage consumers may set
+- regulator-max-microvolt : largest voltage consumers may set
+- ctrl-supply		  : The regulator supplying the control voltage.
+- ctrl-voltage-range	  : an array of two integer values describing the range
+			    (min/max) of the control voltage. The values specify
+			    the control voltage needed to generate the corresponding
+			    regulator-min/max-microvolt output voltage.
+
+Optional properties:
+--------------------
+- ovp-threshold-percent	: overvoltage protection (OVP) threshold of the
+			  regulator in percent. Some regulators have an OVP
+			  circuitry which shuts down the regulator when the
+			  actual output voltage deviates beyond a certain
+			  margin from the expected value for a given control
+			  voltage. On larger voltage decreases this can occur
+			  undesiredly since the output voltage does not adjust
+			  immediately to changes in the control voltage. To
+			  avoid this situation the vctrl driver breaks down
+			  larger voltage decreases into multiple steps, where
+			  each step is within the OVP threshold.
+- min-slew-down-rate	: Describes how slowly the regulator voltage will decay
+			  down in the worst case (lightest expected load).
+			  Specified in uV / us (like main regulator ramp rate).
+			  This value is required when ovp-threshold-percent is
+			  specified.
+
+Example:
+
+	vctrl-reg {
+		compatible = "vctrl-regulator";
+		regulator-name = "vctrl_reg";
+
+		ctrl-supply = <&ctrl_reg>;
+
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1500000>;
+
+		ctrl-voltage-range = <200000 500000>;
+
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt
new file mode 100644
index 0000000000..1c2e92c783
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vexpress.txt
@@ -0,0 +1,32 @@
+Versatile Express voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value: "arm,vexpress-volt"
+- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
+  for more details)
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-always-on"
+
+Optional regulator properties:
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+When no "regulator-[min|max]-microvolt" properties are defined,
+the device is treated as fixed (or rather "read-only") regulator.
+
+Example:
+	volt@0 {
+		compatible = "arm,vexpress-volt";
+		arm,vexpress-sysreg,func = <2 0>;
+		regulator-name = "Cores";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+	};
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
new file mode 100644
index 0000000000..3b16a25ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/vqmmc-ipq4019-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ4019 VQMMC SD LDO regulator
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm IPQ4019 SoC-s feature a built a build SD/EMMC controller,
+  in order to support both 1.8 and 3V I/O voltage levels an LDO
+  controller is also embedded.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: qcom,vqmmc-ipq4019-regulator
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator@1948000 {
+      compatible = "qcom,vqmmc-ipq4019-regulator";
+      reg = <0x01948000 0x4>;
+      regulator-name = "vqmmc";
+      regulator-min-microvolt = <1500000>;
+      regulator-max-microvolt = <3000000>;
+      regulator-always-on;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
new file mode 100644
index 0000000000..11e378648b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona/Madera class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a
+  range of analogue I/O.
+
+  This document lists regulator specific bindings, see the primary binding
+  document. For Wolfson Microelectronic Arizona codecs ../mfd/wlf,arizona.yaml
+  and for Cirrus Logic Madera codecs ../mfd/madera.txt
+
+properties:
+  wlf,ldoena:
+    description:
+      GPIO specifier for the GPIO controlling LDOENA.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ldo1:
+    description:
+      Initial data for the LDO1 regulator.
+    $ref: regulator.yaml#
+    type: object
+    unevaluatedProperties: false
+
+  micvdd:
+    description:
+      Initial data for the MICVDD regulator.
+    $ref: regulator.yaml#
+    type: object
+    unevaluatedProperties: false
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
new file mode 100644
index 0000000000..76e8ca4490
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AO ARC Remote Processor
+
+description:
+  Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs embed an ARC core
+  controller for always-on operations, typically used for managing
+  system suspend. Meson6 and older use a ARC core based on the ARCv1
+  ISA, while Meson8, Meson8b and Meson8m2 use an ARC EM4 (ARCv2 ISA)
+  core.
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson8-ao-arc
+          - amlogic,meson8b-ao-arc
+      - const: amlogic,meson-mx-ao-arc
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of the firmware which should be loaded for this remote
+      processor.
+
+  reg:
+    description:
+      Address ranges of the remap and CPU control addresses for the
+      remote processor.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: remap
+      - const: cpu
+
+  resets:
+    minItems: 1
+
+  clocks:
+    minItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandles to a reserved SRAM region which is used as the memory of
+      the ARC core. The region should be defined as child nodes of the
+      AHB SRAM node as per the generic bindings in
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+  amlogic,secbus2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the SECBUS2 region which contains some configuration
+      bits of this remote processor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - clocks
+  - sram
+  - amlogic,secbus2
+
+additionalProperties: false
+
+examples:
+  - |
+    remoteproc@1c {
+      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+      reg = <0x1c 0x8>, <0x38 0x8>;
+      reg-names = "remap", "cpu";
+      resets = <&media_cpu_reset>;
+      clocks = <&media_cpu_clock>;
+      sram = <&ahb_sram_ao_arc>;
+      amlogic,secbus2 = <&secbus2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
new file mode 100644
index 0000000000..30632efdad
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Co-Processor
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-cm4
+      - fsl,imx7d-cm4
+      - fsl,imx7ulp-cm4
+      - fsl,imx8mm-cm4
+      - fsl,imx8mn-cm7
+      - fsl,imx8mn-cm7-mmio
+      - fsl,imx8mp-cm7
+      - fsl,imx8mp-cm7-mmio
+      - fsl,imx8mq-cm4
+      - fsl,imx8qm-cm4
+      - fsl,imx8qxp-cm4
+      - fsl,imx8ulp-cm33
+      - fsl,imx93-cm33
+
+  clocks:
+    maxItems: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access to System Reset Controller
+
+  mbox-names:
+    items:
+      - const: tx
+      - const: rx
+      - const: rxdb
+
+  mboxes:
+    description:
+      This property is required only if the rpmsg/virtio functionality is used.
+      List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
+      (see mailbox/fsl,mu.yaml)
+    minItems: 1
+    maxItems: 3
+
+  memory-region:
+    description:
+      If present, a phandle for a reserved memory area that used for vdev buffer,
+      resource table, vring region and others used by remote processor.
+    minItems: 1
+    maxItems: 32
+
+  power-domains:
+    maxItems: 8
+
+  fsl,auto-boot:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicate whether need to load the default firmware and start the remote
+      processor automatically.
+
+  fsl,entry-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Specify CPU entry address for SCU enabled processor.
+
+  fsl,iomuxc-gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to IOMUXC GPR block which provide access to CM7 CPUWAIT bit.
+
+  fsl,resource-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property is to specify the resource id of the remote processor in SoC
+      which supports SCFW
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx8mn-cm7-mmio
+                - fsl,imx8mp-cm7-mmio
+    then:
+      properties:
+        fsl,iomuxc-gpr: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    m4_reserved_sysmem1: cm4@80000000 {
+      reg = <0x80000000 0x80000>;
+    };
+
+    m4_reserved_sysmem2: cm4@81000000 {
+      reg = <0x81000000 0x80000>;
+    };
+
+    imx7d-cm4 {
+      compatible	= "fsl,imx7d-cm4";
+      memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+      syscon		= <&src>;
+      clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    imx8mm-cm4 {
+      compatible = "fsl,imx8mm-cm4";
+      clocks = <&clk IMX8MM_CLK_M4_DIV>;
+      mbox-names = "tx", "rx", "rxdb";
+      mboxes = <&mu 0 1
+                &mu 1 1
+                &mu 3 1>;
+      memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+      syscon = <&src>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
new file mode 100644
index 0000000000..8b55dbd909
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic Video Processing Unit
+
+description:
+  Inside the Video Processing Unit (VPU) of the recent JZ47xx SoCs from
+  Ingenic is a second Xburst MIPS CPU very similar to the main core.
+  This document describes the devicetree bindings for this auxiliary
+  processor.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: ingenic,jz4770-vpu-rproc
+
+  reg:
+    items:
+      - description: aux registers
+      - description: tcsm0 registers
+      - description: tcsm1 registers
+      - description: sram registers
+
+  reg-names:
+    items:
+      - const: aux
+      - const: tcsm0
+      - const: tcsm1
+      - const: sram
+
+  clocks:
+    items:
+      - description: aux clock
+      - description: vpu clock
+
+  clock-names:
+    items:
+      - const: aux
+      - const: vpu
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+
+    vpu: video-decoder@132a0000 {
+      compatible = "ingenic,jz4770-vpu-rproc";
+
+      reg = <0x132a0000 0x20>, /* AUX */
+            <0x132b0000 0x4000>, /* TCSM0 */
+            <0x132c0000 0xc000>, /* TCSM1 */
+            <0x132f0000 0x7000>; /* SRAM */
+      reg-names = "aux", "tcsm0", "tcsm1", "sram";
+
+      clocks = <&cgu JZ4770_CLK_AUX>, <&cgu JZ4770_CLK_VPU>;
+      clock-names = "aux", "vpu";
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
new file mode 100644
index 0000000000..895415772d
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/mtk,scp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SCP
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some
+  Mediatek SoCs.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-scp
+      - mediatek,mt8186-scp
+      - mediatek,mt8188-scp
+      - mediatek,mt8192-scp
+      - mediatek,mt8195-scp
+
+  reg:
+    description:
+      Should contain the address ranges for memory regions SRAM, CFG, and,
+      on some platforms, L1TCM.
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: sram
+      - const: cfg
+      - const: l1tcm
+
+  clocks:
+    description:
+      Clock for co-processor (see ../clock/clock-bindings.txt).
+      Required by mt8183 and mt8192.
+    maxItems: 1
+
+  clock-names:
+    const: main
+
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      If present, name (or relative path) of the file within the
+      firmware search path containing the firmware image used when
+      initializing SCP.
+
+  memory-region:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-scp
+            - mediatek,mt8192-scp
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-scp
+            - mediatek,mt8186-scp
+            - mediatek,mt8188-scp
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+additionalProperties:
+  type: object
+  description:
+    Subnodes of the SCP represent rpmsg devices. The names of the devices
+    are not important. The properties of these nodes are defined by the
+    individual bindings for the rpmsg devices.
+  properties:
+    mediatek,rpmsg-name:
+      $ref: /schemas/types.yaml#/definitions/string-array
+      description:
+        Contains the name for the rpmsg device. Used to match
+        the subnode to rpmsg device announced by SCP.
+
+  required:
+    - mediatek,rpmsg-name
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+
+    scp@10500000 {
+        compatible = "mediatek,mt8192-scp";
+        reg = <0x10500000 0x80000>,
+              <0x10700000 0x8000>,
+              <0x10720000 0xe0000>;
+        reg-names = "sram", "cfg", "l1tcm";
+        clocks = <&infracfg CLK_INFRA_SCPSYS>;
+        clock-names = "main";
+
+        cros_ec {
+            mediatek,rpmsg-name = "cros-ec-rpmsg";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
new file mode 100644
index 0000000000..a2b0079de0
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,adsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADSP Peripheral Image Loader
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots
+  firmware on the Qualcomm ADSP Hexagon core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8226-adsp-pil
+      - qcom,msm8953-adsp-pil
+      - qcom,msm8974-adsp-pil
+      - qcom,msm8996-adsp-pil
+      - qcom,msm8996-slpi-pil
+      - qcom,msm8998-adsp-pas
+      - qcom,msm8998-slpi-pas
+      - qcom,sdm660-adsp-pas
+      - qcom,sdm845-adsp-pas
+      - qcom,sdm845-cdsp-pas
+      - qcom,sdm845-slpi-pas
+
+  reg:
+    maxItems: 1
+
+  cx-supply:
+    description: Phandle to the CX regulator
+
+  px-supply:
+    description: Phandle to the PX regulator
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    maxItems: 1
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - memory-region
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8953-adsp-pil
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,sdm845-adsp-pas
+              - qcom,sdm845-cdsp-pas
+              - qcom,sdm845-slpi-pas
+    then:
+      properties:
+        clocks:
+          items:
+            - description: XO clock
+        clock-names:
+          items:
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-slpi-pas
+    then:
+      properties:
+        clocks:
+          items:
+            - description: XO clock
+            - description: AGGRE2 clock
+        clock-names:
+          items:
+            - const: xo
+            - const: aggre2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8953-adsp-pil
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,msm8998-slpi-pas
+              - qcom,sdm845-adsp-pas
+              - qcom,sdm845-cdsp-pas
+              - qcom,sdm845-slpi-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8974-adsp-pil
+    then:
+      required:
+        - cx-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8953-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8998-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+        power-domain-names:
+          items:
+            - const: cx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: SSC-CX power domain
+        power-domain-names:
+          items:
+            - const: ssc_cx
+      required:
+        - px-supply
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sdm845-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-adsp-pil
+              - qcom,msm8953-adsp-pil
+              - qcom,msm8974-adsp-pil
+              - qcom,msm8996-adsp-pil
+              - qcom,msm8996-slpi-pil
+              - qcom,msm8998-adsp-pas
+              - qcom,msm8998-slpi-pas
+              - qcom,sdm660-adsp-pas
+    then:
+      properties:
+        qcom,qmp: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    adsp {
+        compatible = "qcom,msm8974-adsp-pil";
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog",
+                  "fatal",
+                  "ready",
+                  "handover",
+                  "stop-ack";
+
+        clocks = <&rpmcc RPM_CXO_CLK>;
+        clock-names = "xo";
+
+        cx-supply = <&pm8841_s2>;
+
+        memory-region = <&adsp_region>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
new file mode 100644
index 0000000000..e78a89c9ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm G-Link subnode represents communication edge, channels and devices
+  related to the remote processor.
+
+properties:
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm APR (Asynchronous Packet Router)
+
+  fastrpc:
+    $ref: /schemas/misc/qcom,fastrpc.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm FastRPC
+
+  gpr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm GPR (Generic Packet Router)
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  mboxes:
+    maxItems: 1
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      ID of the shared memory used by GLINK for communication with remote
+      processor.
+
+required:
+  - interrupts
+  - label
+  - mboxes
+  - qcom,remote-pid
+
+allOf:
+  - if:
+      required:
+        - apr
+    then:
+      properties:
+        gpr: false
+
+  - if:
+      required:
+        - gpr
+    then:
+      properties:
+        apr: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@8a00000 {
+        reg = <0x08a00000 0x10000>;
+        // ...
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
new file mode 100644
index 0000000000..884158bccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-rpm-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link RPM edge
+
+description: |
+  Qualcomm G-Link edge, a FIFO based mechanism for communication with Resource
+  Power Manager (RPM) on various Qualcomm platforms.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,glink-rpm
+
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: rpm_hlos mailbox in APCS
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      RPM message memory resource (compatible: qcom,rpm-msg-ram).
+
+  rpm-requests:
+    type: object
+    $ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm Resource Power Manager (RPM) over G-Link
+
+    properties:
+      qcom,intents:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 32
+        items:
+          items:
+            - description: size of each intent to preallocate
+            - description: amount of intents to preallocate
+              minimum: 1
+        description:
+          List of (size, amount) pairs describing what intents should be
+          preallocated for this virtual channel. This can be used to tweak the
+          default intents available for the channel to meet expectations of the
+          remote.
+
+    required:
+      - qcom,glink-channels
+
+required:
+  - compatible
+  - interrupts
+  - mboxes
+
+anyOf:
+  - required:
+      - qcom,remote-pid
+  - required:
+      - qcom,rpm-msg-ram
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    glink-edge {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        mboxes = <&apcs_glb 0>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+        rpm-requests {
+            compatible = "qcom,rpm-msm8996";
+            qcom,glink-channels = "rpm_requests";
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
new file mode 100644
index 0000000000..588b010b2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml
@@ -0,0 +1,291 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,msm8916-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 MSS Peripheral Image Loader (and similar)
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  This document describes the hardware for a component that loads and boots
+  firmware on the Qualcomm MSM8916 Modem Hexagon Core (and similar).
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8909-mss-pil
+          - qcom,msm8916-mss-pil
+          - qcom,msm8953-mss-pil
+          - qcom,msm8974-mss-pil
+
+      - const: qcom,q6v5-pil
+        description: Deprecated, prefer using qcom,msm8916-mss-pil
+        deprecated: true
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: Configuration interface (AXI) clock
+      - description: Configuration bus (AHB) clock
+      - description: Boot ROM (AHB) clock
+      - description: XO proxy clock (control handed over after startup)
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: mem
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX proxy power domain (control handed over after startup)
+      - description: MX proxy power domain (control handed over after startup)
+      - description: MSS proxy power domain (control handed over after startup)
+                     (only valid for qcom,msm8953-mss-pil)
+    minItems: 2
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss # only valid for qcom,msm8953-mss-pil
+    minItems: 2
+
+  pll-supply:
+    description: PLL proxy supply (control handed over after startup)
+
+  mss-supply:
+    description: MSS power domain supply (only valid for qcom,msm8974-mss-pil)
+
+  resets:
+    items:
+      - description: MSS restart control
+
+  reset-names:
+    items:
+      - const: mss_restart
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop modem
+
+  qcom,smem-state-names:
+    description: Names of the states used by the AP to signal the Hexagon core
+    items:
+      - const: stop
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: MPSS reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  bam-dmux:
+    $ref: /schemas/net/qcom,bam-dmux.yaml#
+    description:
+      Qualcomm BAM Data Multiplexer (provides network interface to the modem)
+
+  smd-edge:
+    $ref: qcom,smd-edge.yaml#
+    description:
+      Qualcomm SMD subnode which represents communication edge, channels
+      and devices related to the DSP.
+    properties:
+      label:
+        enum:
+          - modem
+          - hexagon
+    unevaluatedProperties: false
+
+  # Deprecated properties
+  cx-supply:
+    description: CX power domain regulator supply (prefer using power-domains)
+    deprecated: true
+
+  mx-supply:
+    description: MX power domain regulator supply (prefer using power-domains)
+    deprecated: true
+
+  mba:
+    type: object
+    additionalProperties: false
+    description:
+      MBA reserved region (prefer using memory-region with two items)
+    properties:
+      memory-region: true
+    required:
+      - memory-region
+    deprecated: true
+
+  mpss:
+    type: object
+    additionalProperties: false
+    description:
+      MPSS reserved region (prefer using memory-region with two items)
+    properties:
+      memory-region: true
+    required:
+      - memory-region
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - pll-supply
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - smd-edge
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8953-mss-pil
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+      required:
+        - power-domains
+        - power-domain-names
+    else:
+      properties:
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8974-mss-pil
+    then:
+      required:
+        - mss-supply
+    else:
+      properties:
+        mss-supply: false
+
+  # Fallbacks for deprecated properties
+  - oneOf:
+      - required:
+          - memory-region
+      - required:
+          - mba
+          - mpss
+  - oneOf:
+      - required:
+          - power-domains
+          - power-domain-names
+      - required:
+          - cx-supply
+          - mx-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,msm8916-mss-pil";
+        reg = <0x04080000 0x100>, <0x04020000 0x40>;
+        reg-names = "qdsp6", "rmb";
+
+        interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+        qcom,smem-states = <&hexagon_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+        qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+                 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+                 <&xo_board>;
+        clock-names = "iface", "bus", "mem", "xo";
+
+        power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>;
+        power-domain-names = "cx", "mx";
+        pll-supply = <&pm8916_l7>;
+
+        resets = <&scm 0>;
+        reset-names = "mss_restart";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        smd-edge {
+            interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,smd-edge = <0>;
+            qcom,ipc = <&apcs 8 12>;
+            qcom,remote-pid = <1>;
+
+            label = "hexagon";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
new file mode 100644
index 0000000000..0643faae2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,msm8996-mss-pil.yaml
@@ -0,0 +1,395 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,msm8996-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 MSS Peripheral Image Loader (and similar)
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  MSS Peripheral Image Loader loads and boots firmware on the
+  Qualcomm Technology Inc. MSM8996 Modem Hexagon Core (and similar).
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-mss-pil
+      - qcom,msm8998-mss-pil
+      - qcom,sdm660-mss-pil
+      - qcom,sdm845-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    maxItems: 9
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain (only valid for qcom,sdm845-mss-pil)
+    minItems: 2
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss # only valid for qcom,sdm845-mss-pil
+    minItems: 2
+
+  pll-supply:
+    description: PLL supply
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset (only valid for qcom,sdm845-mss-pil)
+    minItems: 1
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset # only valid for qcom,sdm845-mss-pil
+    minItems: 1
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop modem
+
+  qcom,smem-state-names:
+    description: Names of the states used by the AP to signal the Hexagon core
+    items:
+      - const: stop
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR syscon region
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: Modem reserved region
+      - description: Metadata reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the Modem.
+    unevaluatedProperties: false
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the Modem.
+    unevaluatedProperties: false
+
+  # Deprecated properties
+  mba:
+    type: object
+    description:
+      MBA reserved region
+
+    properties:
+      memory-region: true
+
+    required:
+      - memory-region
+
+    additionalProperties: false
+    deprecated: true
+
+  mpss:
+    type: object
+    description:
+      MPSS reserved region
+
+    properties:
+      memory-region: true
+
+    required:
+      - memory-region
+
+    additionalProperties: false
+    deprecated: true
+
+  metadata:
+    type: object
+    description:
+      Metadata reserved region
+
+    properties:
+      memory-region: true
+
+    required:
+      - memory-region
+
+    additionalProperties: false
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-mss-pil
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GCC MSS IFACE clock
+            - description: GCC MSS BUS clock
+            - description: GCC MSS MEM clock
+            - description: RPM XO clock
+            - description: GCC MSS GPLL0 clock
+            - description: GCC MSS SNOC_AXI clock
+            - description: GCC MSS MNOC_AXI clock
+            - description: RPM PNOC clock
+            - description: RPM QDSS clock
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: mem
+            - const: xo
+            - const: gpll0_mss
+            - const: snoc_axi
+            - const: mnoc_axi
+            - const: pnoc
+            - const: qdss
+        glink-edge: false
+      required:
+        - pll-supply
+        - smd-edge
+    else:
+      properties:
+        pll-supply: false
+        smd-edge: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,msm8998-mss-pil
+            - qcom,sdm660-mss-pil
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GCC MSS IFACE clock
+            - description: GCC MSS BUS clock
+            - description: GCC MSS MEM clock
+            - description: GCC MSS GPLL0 clock
+            - description: GCC MSS SNOC_AXI clock
+            - description: GCC MSS MNOC_AXI clock
+            - description: RPMH QDSS clock
+            - description: RPMH XO clock
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: mem
+            - const: gpll0_mss
+            - const: snoc_axi
+            - const: mnoc_axi
+            - const: qdss
+            - const: xo
+      required:
+        - glink-edge
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sdm845-mss-pil
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+        clocks:
+          items:
+            - description: GCC MSS IFACE clock
+            - description: GCC MSS BUS clock
+            - description: GCC MSS MEM clock
+            - description: GCC MSS GPLL0 clock
+            - description: GCC MSS SNOC_AXI clock
+            - description: GCC MSS MNOC_AXI clock
+            - description: GCC MSS PRNG clock
+            - description: RPMH XO clock
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: mem
+            - const: gpll0_mss
+            - const: snoc_axi
+            - const: mnoc_axi
+            - const: prng
+            - const: xo
+      required:
+        - qcom,qmp
+        - glink-edge
+    else:
+      properties:
+        iommus: false
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+        qcom,qmp: false
+
+  # Fallbacks for deprecated properties
+  - oneOf:
+      - required:
+          - memory-region
+      - required:
+          - mba
+          - mpss
+          - metadata
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc@4080000 {
+        compatible = "qcom,sdm845-mss-pil";
+        reg = <0x04080000 0x408>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack",
+                          "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+                 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+                 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+                 <&gcc GCC_PRNG_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "bus", "mem", "gpll0_mss",
+                      "snoc_axi", "mnoc_axi", "prng", "xo";
+
+        power-domains = <&rpmhpd SDM845_CX>,
+                        <&rpmhpd SDM845_MX>,
+                        <&rpmhpd SDM845_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+            mboxes = <&apss_shared 12>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
new file mode 100644
index 0000000000..63a82e7a8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,pas-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Peripheral Authentication Service Common Properties
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Common properties of Qualcomm SoCs Peripheral Authentication Service.
+
+properties:
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    minItems: 5
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    minItems: 5
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  power-domains:
+    minItems: 1
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 3
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the ADSP.
+    unevaluatedProperties: false
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the ADSP.
+    unevaluatedProperties: false
+
+required:
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
new file mode 100644
index 0000000000..22219d16df
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm peripheral image loader relocation info
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm peripheral image loader relocation memory region, in IMEM, is
+  used for communicating remoteproc relocation information to post mortem
+  debugging tools.
+
+properties:
+  compatible:
+    const: qcom,pil-reloc-info
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imem@146bf000 {
+      compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
+      reg = <0x146bf000 0x1000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      ranges = <0 0x146bf000 0x1000>;
+
+      pil-reloc@94c {
+        compatible = "qcom,pil-reloc-info";
+        reg = <0x94c 0xc8>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
new file mode 100644
index 0000000000..573a88b606
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -0,0 +1,102 @@
+Qualcomm Hexagon Peripheral Image Loader
+
+This document defines the binding for a component that loads and boots firmware
+on the Qualcomm Hexagon core.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,ipq8074-wcss-pil"
+		    "qcom,qcs404-wcss-pil"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the qdsp6 and
+		    rmb register blocks
+
+- reg-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "q6dsp" and "rmb"
+
+- interrupts-extended:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the interrupts that match interrupt-names
+
+- interrupt-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
+
+- clocks:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the clocks that match clock-names
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: The clocks needed depend on the compatible string:
+	qcom,ipq8074-wcss-pil:
+		    no clock names required
+	qcom,qcs404-wcss-pil:
+		    must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
+		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
+		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
+		    "lcc_axim_cbc", "lcc_bcr_sleep"
+
+- resets:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the list of 3 reset-controllers for the
+		    wcss sub-system
+
+- reset-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
+		    for the wcss sub-system
+
+- memory-region:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to wcss reserved-memory region.
+
+For the compatible string below the following supplies are required:
+  "qcom,qcs404-wcss-pil"
+- cx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the Hexagon core
+
+- qcom,smem-states:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the smem state for requesting the Hexagon to
+		    shut down
+
+- qcom,smem-state-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "stop"
+
+- qcom,halt-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a phandle reference to a syscon representing TCSR followed
+		    by the three offsets within syscon for q6, wcss and nc
+		    halt registers.
+
+- memory-region:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the reserved-memory for the region
+
+The Hexagon node may also have an subnode named either "smd-edge" or
+"glink-edge" that describes the communication edge, channels and devices
+related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
+../soc/qcom/qcom,glink.txt for details on how to describe these.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
new file mode 100644
index 0000000000..06f5f93f62
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 CDSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. CDSP (Compute DSP).
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-cdsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: TBU clock
+      - description: BIMC clock
+      - description: AHB AON clock
+      - description: Q6SS SLAVE clock
+      - description: Q6SS MASTER clock
+      - description: Q6 AXIM clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway
+      - const: tbu
+      - const: bimc
+      - const: ahb_aon
+      - const: q6ss_slave
+      - const: q6ss_master
+      - const: q6_axim
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: AOSS restart
+
+  reset-names:
+    items:
+      - const: restart
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+    remoteproc@b00000 {
+        compatible = "qcom,qcs404-cdsp-pil";
+        reg = <0x00b00000 0x4040>;
+
+        interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        clocks = <&xo_board>,
+                 <&gcc GCC_CDSP_CFG_AHB_CLK>,
+                 <&gcc GCC_CDSP_TBU_CLK>,
+                 <&gcc GCC_BIMC_CDSP_CLK>,
+                 <&turingcc TURING_WRAPPER_AON_CLK>,
+                 <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+                 <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+                 <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+        clock-names = "xo",
+                      "sway",
+                      "tbu",
+                      "bimc",
+                      "ahb_aon",
+                      "q6ss_slave",
+                      "q6ss_master",
+                      "q6_axim";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&gcc GCC_CDSP_RESTART>;
+        reset-names = "restart";
+
+        qcom,halt-regs = <&tcsr 0x19004>;
+
+        memory-region = <&cdsp_fw_mem>;
+
+        qcom,smem-states = <&cdsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
new file mode 100644
index 0000000000..eb868a7ff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm QCS404 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-adsp-pas
+      - qcom,qcs404-cdsp-pas
+      - qcom,qcs404-wcss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    maxItems: 5
+
+  power-domains: false
+  power-domain-names: false
+  smd-edge: false
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc@c700000 {
+        compatible = "qcom,qcs404-adsp-pas";
+        reg = <0x0c700000 0x4040>;
+
+        clocks = <&xo_board>;
+        clock-names = "xo";
+
+        interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&adsp_fw_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,remote-pid = <2>;
+            mboxes = <&apcs_glb 8>;
+
+            label = "adsp";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
new file mode 100644
index 0000000000..7afafde17a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,rpm-proc.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Resource Power Manager (RPM) subsystem found in various Qualcomm platforms:
+
+                  +--------------------------------------------+
+                  |       RPM subsystem (qcom,rpm-proc)        |
+                  |                                            |
+            reset | +---------------+     +-----+  +-----+     |
+          --------->|               |     | MPM |  | CPR | ... |
+   IPC interrupts | | ARM Cortex-M3 |---  +-----+  +-----+     |
+  ----------------->|               |  |     |        |        |
+                  | +---------------+  |---------------------- |
+                  | +---------------+  |                       |
+                  | |   Code RAM    |--|  +------------------+ |
+                  | +---------------+  |  |                  | |
+                  | +---------------+  |--|   Message RAM    | |
+                  | |   Data RAM    |--|  |                  | |
+                  | +---------------+  |  +------------------+ |
+                  +--------------------|-----------------------+
+                                       v
+                                      NoC
+
+  The firmware running on the processor inside the RPM subsystem allows each
+  component in the system to vote for state of the system resources, such as
+  clocks, regulators and bus frequencies. It implements multiple separate
+  communication interfaces that are described in subnodes, e.g. SMD and MPM:
+
+             +------------------------------+
+             |        ARM Cortex-M3         |
+             |                              |   +------------------------------+
+             | +--------------------------+ |   |          Message RAM         |
+             | |  RPM firmware            | |   |                              |
+   IPC IRQ 0 | | +----------------------+ | |   | +--------------------------+ |
+  -------------->| SMD server           |<------->| SMD data structures      | |
+             | | | +--------------+     | | |   | | +--------------+         | |
+             | | | | rpm_requests | ... | | |   | | | rpm_requests |   ...   | |
+             | | | +--------------+     | | |   | | +--------------+         | |
+   IPC IRQ 1 | | +----------------------+ | |   | +--------------------------+ |
+  -------------->| MPM virtualization   |<--------| MPM register copy (vMPM) | |
+             | | +----------------------+ | |   | +--------------------------+ |
+             | |           ...      |     | |   |              ...             |
+             | +--------------------|-----+ |   +------------------------------+
+             +----------------------|-------+
+                                    v
+                             +--------------+
+                             | MPM Hardware |
+                             +--------------+
+
+  The services provided by the firmware are only available after the firmware
+  has been loaded and the processor has been released from reset. Usually this
+  happens early in the boot process before the operating system is started.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8084-rpm-proc
+          - qcom,ipq6018-rpm-proc
+          - qcom,ipq9574-rpm-proc
+          - qcom,mdm9607-rpm-proc
+          - qcom,msm8226-rpm-proc
+          - qcom,msm8610-rpm-proc
+          - qcom,msm8909-rpm-proc
+          - qcom,msm8916-rpm-proc
+          - qcom,msm8917-rpm-proc
+          - qcom,msm8936-rpm-proc
+          - qcom,msm8937-rpm-proc
+          - qcom,msm8952-rpm-proc
+          - qcom,msm8953-rpm-proc
+          - qcom,msm8974-rpm-proc
+          - qcom,msm8976-rpm-proc
+          - qcom,msm8994-rpm-proc
+          - qcom,msm8996-rpm-proc
+          - qcom,msm8998-rpm-proc
+          - qcom,qcm2290-rpm-proc
+          - qcom,qcs404-rpm-proc
+          - qcom,sdm660-rpm-proc
+          - qcom,sm6115-rpm-proc
+          - qcom,sm6125-rpm-proc
+          - qcom,sm6375-rpm-proc
+      - const: qcom,rpm-proc
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the RPM subsystem.
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge,
+      channels and devices related to the RPM subsystem.
+
+  interrupt-controller:
+    type: object
+    $ref: /schemas/interrupt-controller/qcom,mpm.yaml#
+    description:
+      MSM Power Manager (MPM) interrupt controller that monitors interrupts
+      when the system is asleep.
+
+  master-stats:
+    $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+    description:
+      Subsystem-level low-power mode statistics provided by RPM.
+
+required:
+  - compatible
+
+oneOf:
+  - required:
+      - smd-edge
+  - required:
+      - glink-edge
+
+additionalProperties: false
+
+examples:
+  # SMD
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+      compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+      smd-edge {
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 0>;
+        qcom,smd-edge = <15>;
+
+        rpm-requests {
+          compatible = "qcom,rpm-msm8916";
+          qcom,smd-channels = "rpm_requests";
+          /* ... */
+        };
+      };
+    };
+  # GLINK
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+      compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+      glink-edge {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+        mboxes = <&apcs_glb 0>;
+
+        rpm-requests {
+          compatible = "qcom,rpm-qcm2290";
+          qcom,glink-channels = "rpm_requests";
+          /* ... */
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
new file mode 100644
index 0000000000..b1402bef0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS BUS clock
+      - description: GCC MSS NAV clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: GCC MSS MFAB_AXIS clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nav
+      - const: snoc_axi
+      - const: mnoc_axi
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+      - description: metadata reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  qcom,spare-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Spare registers are multipurpose registers used for errata
+      handling.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the conn_box_spare0 register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,spare-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7180-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_NAV_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "bus", "nav", "snoc_axi",
+                      "mnoc_axi", "xo";
+
+        power-domains = <&rpmhpd SC7180_CX>,
+                        <&rpmhpd SC7180_MX>,
+                        <&rpmhpd SC7180_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+        qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apss_shared 12>;
+            qcom,remote-pid = <1>;
+            label = "modem";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
new file mode 100644
index 0000000000..689d5d5353
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180/SC7280 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC7180/SC7280 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-mpss-pas
+      - qcom,sc7280-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  interrupts:
+    minItems: 6
+
+  interrupt-names:
+    minItems: 6
+
+  power-domains:
+    minItems: 2
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: cx
+      - const: mx
+      - const: mss
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-mpss-pas
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+        power-domain-names:
+          minItems: 3
+    else:
+      properties:
+        power-domains:
+          maxItems: 2
+        power-domain-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@4080000 {
+        compatible = "qcom,sc7180-mpss-pas";
+        reg = <0x04080000 0x4040>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        memory-region = <&mpss_mem>;
+
+        power-domains = <&rpmhpd SC7180_CX>,
+                        <&rpmhpd SC7180_MX>,
+                        <&rpmhpd SC7180_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+            mboxes = <&apss_shared 12>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
new file mode 100644
index 0000000000..94ca7a0cc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 ADSP Peripheral Image Loader
+
+maintainers:
+  - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. ADSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-adsp-pil
+
+  reg:
+    items:
+      - description: qdsp6ss register
+      - description: efuse q6ss register
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with sid mask
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: GCC CFG NOC LPASS clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gcc_cfg_noc_lpass
+
+  power-domains:
+    items:
+      - description: LCX power domain
+
+  resets:
+    items:
+      - description: PDC AUDIO SYNC RESET
+      - description: CC LPASS restart
+
+  reset-names:
+    items:
+      - const: pdc_sync
+      - const: cc_lpass
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      four offsets within syscon for q6, modem, nc and qv6 halt registers.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+          - description: offset to the vq6 halt register
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    type: object
+    unevaluatedProperties: false
+    description: |
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the ADSP.
+
+    properties:
+      label:
+        const: lpass
+
+      gpr: true
+      apr: false
+      fastrpc: false
+
+    required:
+      - label
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - qcom,qmp
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@3000000 {
+        compatible = "qcom,sc7280-adsp-pil";
+        reg = <0x03000000 0x5000>,
+              <0x0355b000 0x10>;
+
+        interrupts-extended = <&pdc 162 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready",
+                "handover", "stop-ack", "shutdown-ack";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&gcc GCC_CFG_NOC_LPASS_CLK>;
+        clock-names = "xo", "gcc_cfg_noc_lpass";
+
+        power-domains = <&rpmhpd SC7280_LCX>;
+
+        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
+        reset-names = "pdc_sync", "cc_lpass";
+
+        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+
+        memory-region = <&adsp_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        qcom,qmp = <&aoss_qmp>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
new file mode 100644
index 0000000000..005cb21732
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interconnects:
+    items:
+      - description: Path leading to system memory
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS OFFLINE clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: RPMH PKA clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: offline
+      - const: snoc_axi
+      - const: pka
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+      - description: metadata reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+          - description: offset to the vq6 halt register
+
+  qcom,ext-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: EXT registers are used for various power related functionality
+    items:
+      - items:
+          - description: phandle to TCSR_REG registers
+          - description: offset to the force_clk_en register
+          - description: offset to the rscc_disable register
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the axim1_clk_off register
+          - description: offset to the crypto_clk_off register
+
+  qcom,qaccept-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: QACCEPT registers are used to bring up/down Q-channels
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the mdm qaccept register
+          - description: offset to the cx qaccept register
+          - description: offset to the axi qaccept register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interconnects
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,ext-regs
+  - qcom,qaccept-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7280-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+
+        interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&rpmhcc RPMH_PKA_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MSS>;
+        power-domain-names = "cx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+        qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
+        qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+                                   IPCC_MPROC_SIGNAL_GLINK_QMP
+                                   IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_MPSS
+                      IPCC_MPROC_SIGNAL_GLINK_QMP>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
new file mode 100644
index 0000000000..b6bd334385
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 WPSS Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. WPSS.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-wpss-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC WPSS AHB BDG Master clock
+      - description: GCC WPSS AHB clock
+      - description: GCC WPSS RSCP clock
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: ahb_bdg
+      - const: ahb
+      - const: rscp
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC SYNC
+
+  reset-names:
+    items:
+      - const: restart
+      - const: pdc_sync
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of the firmware which should be loaded for this remote
+      processor.
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the ADSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from WPSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and WPSS
+
+      label:
+        items:
+          - const: wpss
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    remoteproc@8a00000 {
+        compatible = "qcom,sc7280-wpss-pil";
+        reg = <0x08a00000 0x10000>;
+
+        interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+                 <&gcc GCC_WPSS_AHB_CLK>,
+                 <&gcc GCC_WPSS_RSCP_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ahb_bdg", "ahb",
+                      "rscp", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MX>;
+        power-domain-names = "cx", "mx";
+
+        memory-region = <&wpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&wpss_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+                 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+        reset-names = "restart", "pdc_sync";
+
+        qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
new file mode 100644
index 0000000000..4744a37b2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8180x-pas.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc8180x-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180X Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8180X SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-adsp-pas
+      - qcom,sc8180x-cdsp-pas
+      - qcom,sc8180x-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8180x-adsp-pas
+            - qcom,sc8180x-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8180x-adsp-pas
+            - qcom,sc8180x-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+    else:
+      properties:
+        # TODO: incomplete
+        power-domains: false
+        power-domain-names: false
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
new file mode 100644
index 0000000000..96d53baf6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc8280xp-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8280XP SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-adsp-pas
+      - qcom,sc8280xp-nsp0-pas
+      - qcom,sc8280xp-nsp1-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-nsp0-pas
+            - qcom,sc8280xp-nsp1-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+    else:
+      properties:
+        power-domains:
+          items:
+            - description: NSP power domain
+        power-domain-names:
+          items:
+            - const: nsp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@3000000 {
+        compatible = "qcom,sc8280xp-adsp-pas";
+        reg = <0x03000000 0x100>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack", "shutdown-ack";
+
+        memory-region = <&pil_adsp_mem>;
+
+        power-domains = <&rpmhpd SC8280XP_LCX>,
+                        <&rpmhpd SC8280XP_LMX>;
+        power-domain-names = "lcx", "lmx";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
new file mode 100644
index 0000000000..20df83a96e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 ADSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. ADSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-adsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: LPASS AHBS AON clock
+      - description: LPASS AHBM AON clock
+      - description: QDSP XO clock
+      - description: Q6SP6SS SLEEP clock
+      - description: Q6SP6SS CORE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway_cbcr
+      - const: lpass_ahbs_aon_cbcr
+      - const: lpass_ahbm_aon_cbcr
+      - const: qdsp6ss_xo
+      - const: qdsp6ss_sleep
+      - const: qdsp6ss_core
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: PDC AUDIO SYNC RESET
+      - description: CC LPASS restart
+
+  reset-names:
+    items:
+      - const: pdc_sync
+      - const: cc_lpass
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    remoteproc@17300000 {
+        compatible = "qcom,sdm845-adsp-pil";
+        reg = <0x17300000 0x40c>;
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                "handover", "stop-ack";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&gcc GCC_LPASS_SWAY_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+        clock-names = "xo", "sway_cbcr",
+                "lpass_ahbs_aon_cbcr",
+                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+                "qdsp6ss_sleep", "qdsp6ss_core";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
+        reset-names = "pdc_sync", "cc_lpass";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+        memory-region = <&pil_adsp_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
new file mode 100644
index 0000000000..5d46327216
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sdx55-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDX55 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SDX55 SoC Peripheral Authentication Service loads and boots firmware
+  on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx55-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  interrupts:
+    minItems: 6
+
+  interrupt-names:
+    minItems: 6
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mss
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@4080000 {
+        compatible = "qcom,sdx55-mpss-pas";
+        reg = <0x04080000 0x4040>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        memory-region = <&mpss_adsp_mem>;
+
+        power-domains = <&rpmhpd SDX55_CX>, <&rpmhpd SDX55_MSS>;
+        power-domain-names = "cx", "mss";
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+            label = "mpss";
+            mboxes = <&apcs 15>;
+            qcom,remote-pid = <1>;
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
new file mode 100644
index 0000000000..0282872359
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm6115-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Peripheral Authentication Service
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  Qualcomm SM6115 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sm6115-adsp-pas
+          - qcom,sm6115-cdsp-pas
+          - qcom,sm6115-mpss-pas
+
+      - items:
+          - const: qcom,qcm2290-adsp-pas
+          - const: qcom,sm6115-adsp-pas
+
+      - items:
+          - const: qcom,qcm2290-mpss-pas
+          - const: qcom,sm6115-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-adsp-pas
+              - qcom,sm6115-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-cdsp-pas
+              - qcom,sm6115-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+        power-domain-names:
+          items:
+            - const: cx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LPI CX power domain
+            - description: LPI MX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@ab00000 {
+        compatible = "qcom,sm6115-adsp-pas";
+        reg = <0x0ab00000 0x100>;
+
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+        clock-names = "xo";
+
+        firmware-name = "qcom/sm6115/adsp.mdt";
+
+        interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&pil_adsp_mem>;
+
+        power-domains = <&rpmpd SM6115_VDD_LPI_CX>,
+                        <&rpmpd SM6115_VDD_LPI_MX>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+            label = "lpass";
+            qcom,remote-pid = <2>;
+            mboxes = <&apcs_glb 8>;
+
+            /* ... */
+
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
new file mode 100644
index 0000000000..f7e40fb166
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm6350-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM6350 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6350-adsp-pas
+      - qcom,sm6350-cdsp-pas
+      - qcom,sm6350-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6350-adsp-pas
+            - qcom,sm6350-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6350-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6350-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MX power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6350-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@3000000 {
+        compatible = "qcom,sm6350-adsp-pas";
+        reg = <0x03000000 0x100>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&pil_adsp_mem>;
+
+        power-domains = <&rpmhpd SM6350_LCX>,
+                        <&rpmhpd SM6350_LMX>;
+        power-domain-names = "lcx", "lmx";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
new file mode 100644
index 0000000000..238c6e5e67
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm8150-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150/SM8250 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8150/SM8250 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8150-adsp-pas
+      - qcom,sm8150-cdsp-pas
+      - qcom,sm8150-mpss-pas
+      - qcom,sm8150-slpi-pas
+      - qcom,sm8250-adsp-pas
+      - qcom,sm8250-cdsp-pas
+      - qcom,sm8250-slpi-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8150-adsp-pas
+            - qcom,sm8150-cdsp-pas
+            - qcom,sm8150-slpi-pas
+            - qcom,sm8250-adsp-pas
+            - qcom,sm8250-cdsp-pas
+            - qcom,sm8250-slpi-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8150-adsp-pas
+            - qcom,sm8150-cdsp-pas
+            - qcom,sm8250-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+        power-domain-names:
+          items:
+            - const: cx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8150-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8150-slpi-pas
+            - qcom,sm8250-adsp-pas
+            - qcom,sm8250-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@17300000 {
+        compatible = "qcom,sm8150-adsp-pas";
+        reg = <0x17300000 0x4040>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        firmware-name = "qcom/sm8150/adsp.mbn";
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&adsp_mem>;
+
+        power-domains = <&rpmhpd SM8150_CX>;
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+            label = "lpass";
+            qcom,remote-pid = <2>;
+            mboxes = <&apss_shared 8>;
+
+            /* ... */
+
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
new file mode 100644
index 0000000000..53cea8e53a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm8350-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350/SM8450 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8350/SM8450 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8350-adsp-pas
+      - qcom,sm8350-cdsp-pas
+      - qcom,sm8350-slpi-pas
+      - qcom,sm8350-mpss-pas
+      - qcom,sm8450-adsp-pas
+      - qcom,sm8450-cdsp-pas
+      - qcom,sm8450-mpss-pas
+      - qcom,sm8450-slpi-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Firmware name for the Hexagon core
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8350-adsp-pas
+            - qcom,sm8350-cdsp-pas
+            - qcom,sm8350-slpi-pas
+            - qcom,sm8450-adsp-pas
+            - qcom,sm8450-cdsp-pas
+            - qcom,sm8450-slpi-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8350-mpss-pas
+            - qcom,sm8450-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8350-adsp-pas
+            - qcom,sm8350-slpi-pas
+            - qcom,sm8450-adsp-pas
+            - qcom,sm8450-slpi-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8350-cdsp-pas
+            - qcom,sm8450-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    remoteproc@30000000 {
+        compatible = "qcom,sm8450-adsp-pas";
+        reg = <0x030000000 0x100>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        firmware-name = "qcom/sm8450/adsp.mbn";
+
+        interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&adsp_mem>;
+
+        power-domains = <&rpmhpd RPMHPD_LCX>,
+                        <&rpmhpd RPMHPD_LMX>;
+        power-domain-names = "lcx", "lmx";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
new file mode 100644
index 0000000000..58120829fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm8550-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8550 SoC Peripheral Authentication Service loads and boots firmware
+  on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-adsp-pas
+      - qcom,sm8550-cdsp-pas
+      - qcom,sm8550-mpss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Firmware name of the Hexagon core
+      - description: Firmware name of the Hexagon Devicetree
+
+  memory-region:
+    minItems: 2
+    items:
+      - description: Memory region for main Firmware authentication
+      - description: Memory region for Devicetree Firmware authentication
+      - description: DSM Memory region
+
+required:
+  - compatible
+  - reg
+  - memory-region
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-adsp-pas
+            - qcom,sm8550-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-mpss-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MSS power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mss
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-cdsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: CX power domain
+            - description: MXC power domain
+            - description: NSP power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mxc
+            - const: nsp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@30000000 {
+        compatible = "qcom,sm8550-adsp-pas";
+        reg = <0x030000000 0x100>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&adsp_mem>, <&dtb_adsp_mem>;
+
+        firmware-name = "qcom/sm8550/adsp.mbn",
+                        "qcom/sm8550/adsp_dtb.mbn";
+
+        power-domains = <&rpmhpd_sm8550_lcx>,
+                        <&rpmhpd_sm8550_lmx>;
+        power-domain-names = "lcx", "lmx";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
new file mode 100644
index 0000000000..02c85b420c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMD Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm SMD subnode represents a remote subsystem or a remote processor of
+  some sort - or in SMD language an "edge". The name of the edges are not
+  important.
+
+  In turn, subnodes of the "edges" represent devices tied to SMD channels on
+  that "edge". The names of the devices are not important. The properties of
+  these nodes are defined by the individual bindings for the SMD devices.
+  See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+
+properties:
+  $nodename:
+    const: smd-edge
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    $ref: /schemas/misc/qcom,fastrpc.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm FastRPC
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote processor.
+
+  qcom,smd-edge:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote processor in the smd channel allocation
+      table.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+  rpm-requests:
+    $ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm Resource Power Manager (RPM) over SMD.
+
+  wcnss:
+    $ref: /schemas/soc/qcom/qcom,wcnss.yaml
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm WCNSS for Bluetooth, WiFi and FM radio.
+
+required:
+  - interrupts
+  - qcom,smd-edge
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc {
+        // ...
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
new file mode 100644
index 0000000000..45eb42bd3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  This document defines the binding for a component that loads and boots
+  firmware on the Qualcomm WCNSS core.
+
+properties:
+  compatible:
+    description:
+      Append "qcom,pronto" if the device is actually pronto, and not riva
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pronto-v1-pil
+              - qcom,pronto-v2-pil
+              - qcom,pronto-v3-pil
+          - const: qcom,pronto
+      - const: qcom,riva-pil
+
+  reg:
+    maxItems: 3
+    description:
+      The base address and size of the CCU, DXE and PMU register blocks
+
+  reg-names:
+    items:
+      - const: ccu
+      - const: dxe
+      - const: pmu
+
+  interrupts:
+    minItems: 2
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Relative firmware image path for the WCNSS core. Defaults to
+      "wcnss.mdt".
+
+  vddpx-supply:
+    description:
+      PX regulator to be held on behalf of the booting of the WCNSS core
+
+  vddmx-supply:
+    description:
+      MX regulator to be held on behalf of the booting of the WCNSS core.
+
+  vddcx-supply:
+    description:
+      CX regulator to be held on behalf of the booting of the WCNSS core.
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      States used by the AP to signal the WCNSS core that it should shutdown
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+  memory-region:
+    maxItems: 1
+    description: reserved-memory for the WCNSS core
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the ADSP.
+
+  iris:
+    type: object
+    description:
+      The iris subnode of the WCNSS PIL is used to describe the attached RF module
+      and its resource dependencies.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,wcn3620
+          - qcom,wcn3660
+          - qcom,wcn3660b
+          - qcom,wcn3680
+
+      clocks:
+        minItems: 1
+        items:
+          - description: XO clock
+          - description: RF clock
+
+      clock-names:
+        minItems: 1
+        items:
+          - const: xo
+          - const: rf
+
+      vddxo-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+      vddrfa-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+      vddpa-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+      vdddig-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - vddxo-supply
+      - vddrfa-supply
+      - vddpa-supply
+      - vdddig-supply
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - iris
+  - vddpx-supply
+  - memory-region
+  - smd-edge
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,riva-pil
+    then:
+      required:
+        - vddcx-supply
+        - vddmx-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pronto-v1-pil
+              - qcom,pronto-v2-pil
+    then:
+      properties:
+        vddmx-supply:
+          deprecated: true
+          description: Deprecated for qcom,pronto-v1/2-pil
+
+        vddcx-supply:
+          deprecated: true
+          description: Deprecated for qcom,pronto-v1/2-pil
+
+      oneOf:
+        - required:
+            - power-domains
+            - power-domain-names
+        - required:
+            - vddmx-supply
+            - vddcx-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pronto-v3-pil
+    then:
+      properties:
+        vddmx-supply: false
+        vddcx-supply: false
+
+      required:
+        - power-domains
+        - power-domain-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    pronto@a21b000 {
+        compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+        reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+        reg-names = "ccu", "dxe", "pmu";
+
+        interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+        power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>;
+        power-domain-names = "cx", "mx";
+
+        vddpx-supply = <&pm8916_l7>;
+
+        qcom,smem-states = <&wcnss_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        memory-region = <&wcnss_region>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&wcnss_pin_a>;
+
+        iris {
+            compatible = "qcom,wcn3620";
+            vddxo-supply = <&pm8916_l7>;
+            vddrfa-supply = <&pm8916_s3>;
+            vddpa-supply = <&pm8916_l9>;
+            vdddig-supply = <&pm8916_l5>;
+
+            clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+            clock-names = "xo";
+        };
+
+        smd-edge {
+            interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 17>;
+            qcom,smd-edge = <6>;
+            qcom,remote-pid = <4>;
+
+            label = "pronto";
+
+            wcnss_ctrl: wcnss {
+                compatible = "qcom,wcnss";
+                qcom,smd-channels = "WCNSS_CTRL";
+
+                qcom,mmio = <&pronto>;
+
+                bluetooth {
+                    compatible = "qcom,wcnss-bt";
+                };
+
+                wifi {
+                    compatible = "qcom,wcnss-wlan";
+
+                    interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "tx", "rx";
+
+                    qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                    qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
new file mode 100644
index 0000000000..4bea679a0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car remote processor controller
+
+maintainers:
+  - Julien Massot <julien.massot@iot.bzh>
+
+description: |
+  This document defines the bindings for the remoteproc component that loads and
+  boots firmwares on the Renesas R-Car family chipset.
+  R-Car gen3 family may have a realtime processor, this processor shares peripheral
+  and RAM with the host processor with the same address map.
+
+properties:
+  compatible:
+    const: renesas,rcar-cr7
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    description:
+      List of phandles to the reserved memory regions associated with the
+      remoteproc device. This is variable and describes the memories shared with
+      the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+      vrings, ...).
+      (see ../reserved-memory/reserved-memory.yaml)
+
+required:
+  - compatible
+  - resets
+  - memory-region
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cr7_ram: cr7_ram@40040000 {
+            no-map;
+            reg = <0x0 0x40040000 0x0 0x1fc0000>;
+        };
+    };
+
+    cr7_rproc: cr7 {
+        compatible = "renesas,rcar-cr7";
+        memory-region = <&cr7_ram>;
+        power-domains = <&sysc R8A7795_PD_CR7>;
+        resets = <&cpg 222>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
new file mode 100644
index 0000000000..370af61d8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 remote processor controller
+
+description:
+  This document defines the binding for the remoteproc component that loads and
+  boots firmwares on the ST32MP family chipset.
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1-m4
+
+  reg:
+    description:
+      Address ranges of the RETRAM and MCU SRAM memories used by the remote
+      processor.
+    maxItems: 3
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: mcu_rst
+      - const: hold_boot
+    minItems: 1
+
+  st,syscfg-holdboot:
+    description: remote processor reset hold boot
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the hold boot setting register
+          - description: The field mask of the hold boot
+
+  st,syscfg-tz:
+    deprecated: true
+    description:
+      Reference to the system configuration which holds the RCC trust zone mode
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the trust zone setting register
+          - description: The field mask of the trust zone state
+
+  interrupts:
+    description: Should contain the WWDG1 watchdog reset interrupt
+    maxItems: 1
+
+  wakeup-source: true
+
+  mboxes:
+    description:
+      This property is required only if the rpmsg/virtio functionality is used.
+    items:
+      - description: |
+          A channel (a) used to communicate through virtqueues with the
+          remote proc.
+          Bi-directional channel:
+            - from local to remote = send message
+            - from remote to local = send message ack
+      - description: |
+          A channel (b) working the opposite direction of channel (a)
+      - description: |
+          A channel (c) used by the local proc to notify the remote proc that it
+          is about to be shut down.
+          Unidirectional channel:
+            - from local to remote, where ACK from the remote means that it is
+              ready for shutdown
+      - description: |
+          A channel (d) used by the local proc to notify the remote proc that it
+          has to stop interprocessor communication.
+          Unidirectional channel:
+            - from local to remote, where ACK from the remote means that communication
+              as been stopped on the remote side.
+    minItems: 1
+
+  mbox-names:
+    items:
+      - const: vq0
+      - const: vq1
+      - const: shutdown
+      - const: detach
+    minItems: 1
+
+  memory-region:
+    description:
+      List of phandles to the reserved memory regions associated with the
+      remoteproc device. This is variable and describes the memories shared with
+      the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+      vrings, ...).
+      (see ../reserved-memory/reserved-memory.txt)
+
+  st,syscfg-pdds:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Reference to the system configuration which holds the remote
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the power setting register
+          - description: The field mask of the PDDS selection
+
+  st,syscfg-m4-state:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Reference to the tamp register which exposes the Cortex-M4 state.
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: The offset of the tamp register
+          - description: The field mask of the Cortex-M4 state
+
+  st,syscfg-rsc-tbl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Reference to the tamp register which references the Cortex-M4
+      resource table address.
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: The offset of the tamp register
+          - description: The field mask of the Cortex-M4 resource table address
+
+  st,auto-boot:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If defined, when remoteproc is probed, it loads the default firmware and
+      starts the remote processor.
+
+required:
+  - compatible
+  - reg
+  - resets
+
+allOf:
+  - if:
+      properties:
+        reset-names:
+          not:
+            contains:
+              const: hold_boot
+    then:
+      required:
+        - st,syscfg-holdboot
+    else:
+      properties:
+        st,syscfg-holdboot: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    m4@10000000 {
+      compatible = "st,stm32mp1-m4";
+      reg = <0x10000000 0x40000>,
+            <0x30000000 0x40000>,
+            <0x38000000 0x10000>;
+      resets = <&rcc MCU_R>;
+      reset-names = "mcu_rst";
+      /* Hold boot managed using system config*/
+      st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+      st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+      st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+    };
+  - |
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    m4@10000000 {
+      compatible = "st,stm32mp1-m4";
+      reg = <0x10000000 0x40000>,
+            <0x30000000 0x40000>,
+            <0x38000000 0x10000>;
+      /* Hold boot managed using SCMI reset controller */
+      resets = <&scmi MCU_R>, <&scmi MCU_HOLD_BOOT_R>;
+      reset-names = "mcu_rst", "hold_boot";
+      st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+      st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
new file mode 100644
index 0000000000..1031bcd90a
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
@@ -0,0 +1,41 @@
+STMicroelectronics Co-Processor Bindings
+----------------------------------------
+
+This binding provides support for adjunct processors found on ST SoCs.
+
+Co-processors can be controlled from the bootloader or the primary OS. If
+the bootloader starts a co-processor, the primary OS must detect its state
+and act accordingly.
+
+Required properties:
+- compatible		Should be one of:
+				"st,st231-rproc"
+				"st,st40-rproc"
+- memory-region		Reserved memory (See: ../reserved-memory/reserved-memory.txt)
+- resets		Reset lines (See: ../reset/reset.txt)
+- reset-names		Must be "sw_reset" and "pwr_reset"
+- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-frequency	Clock frequency to set co-processor at if the bootloader
+			hasn't already done so
+- st,syscfg		System configuration register which holds the boot vector
+			for the co-processor
+				1st cell: Phandle to syscon block
+				2nd cell: Boot vector register offset
+
+Example:
+
+	audio_reserved: rproc@42000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x42000000 0x01000000>;
+		no-map;
+	};
+
+	st231-audio {
+		compatible	= "st,st231-rproc";
+		memory-region	= <&audio_reserved>;
+		resets		= <&softreset STIH407_ST231_AUD_SOFTRESET>;
+		reset-names	= "sw_reset";
+		clocks		= <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+		clock-frequency	= <600000000>;
+		st,syscfg	= <&syscfg_core 0x228>;
+	};
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
new file mode 100644
index 0000000000..25f8658e21
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,davinci-rproc.txt
@@ -0,0 +1,80 @@
+TI Davinci DSP devices
+=======================
+
+Binding status: Unstable - Subject to changes for DT representation of clocks
+			   and resets
+
+The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
+is used to offload some of the processor-intensive tasks or algorithms, for
+achieving various system level goals.
+
+The processor cores in the sub-system usually contain additional sub-modules
+like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+controller, a dedicated local power/sleep controller etc. The DSP processor
+core used in Davinci SoCs is usually a C674x DSP CPU.
+
+DSP Device Node:
+================
+Each DSP Core sub-system is represented as a single DT node.
+
+Required properties:
+--------------------
+The following are the mandatory properties:
+
+- compatible:		Should be one of the following,
+			    "ti,da850-dsp" for DSPs on OMAP-L138 SoCs
+
+- reg:			Should contain an entry for each value in 'reg-names'.
+			Each entry should have the memory region's start address
+			and the size of the region, the representation matching
+			the parent node's '#address-cells' and '#size-cells' values.
+
+- reg-names:		Should contain strings with the following names, each
+			representing a specific internal memory region or a
+			specific register space,
+			     "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base"
+
+- interrupts: 		Should contain the interrupt number used to receive the
+			interrupts from the DSP. The value should follow the
+			interrupt-specifier format as dictated by the
+			'interrupt-parent' node.
+
+- memory-region:	phandle to the reserved memory node to be associated
+			with the remoteproc device. The reserved memory node
+			can be a CMA memory node, and should be defined as
+			per the bindings in
+			Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+
+Example:
+--------
+
+	/* DSP Reserved Memory node */
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@c3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xc3000000 0x1000000>;
+			reusable;
+		};
+	};
+
+	/* DSP node */
+	{
+		dsp: dsp@11800000 {
+			compatible = "ti,da850-dsp";
+			reg = <0x11800000 0x40000>,
+			      <0x11e00000 0x8000>,
+			      <0x11f00000 0x8000>,
+			      <0x01c14044 0x4>,
+			      <0x01c14174 0x8>;
+			reg-names = "l2sram", "l1pram", "l1dram", "host1cfg",
+				    "chipsig";
+			interrupt-parent = <&intc>;
+			interrupts = <28>;
+			memory-region = <&dsp_memory_region>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
new file mode 100644
index 0000000000..9768db8663
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-dsp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 DSP devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems
+  that are used to offload some of the processor-intensive tasks or algorithms,
+  for achieving various system level goals.
+
+  These processor sub-systems usually contain additional sub-modules like
+  L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
+  controller, a dedicated local power/sleep controller etc. The DSP processor
+  cores in the K3 SoCs are usually either a TMS320C66x CorePac processor or a
+  TMS320C71x CorePac processor.
+
+  Each DSP Core sub-system is represented as a single DT node. Each node has a
+  number of required or optional properties that enable the OS running on the
+  host processor (Arm CorePac) to perform the device management of the remote
+  processor and to communicate with the remote processor.
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am62a-c7xv-dsp
+      - ti,j721e-c66-dsp
+      - ti,j721e-c71-dsp
+      - ti,j721s2-c71-dsp
+    description:
+      Use "ti,am62a-c7xv-dsp" for AM62A Deep learning DSPs on K3 AM62A SoCs
+      Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
+      Use "ti,j721e-c71-dsp" for C71x DSPs on K3 J721E SoCs
+      Use "ti,j721s2-c71-dsp" for C71x DSPs on K3 J721S2 SoCs
+
+  resets:
+    description: |
+      Should contain the phandle to the reset controller node managing the
+      local resets for this device, and a reset specifier.
+    maxItems: 1
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  mboxes:
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. This property should match
+      with the sub-mailbox node used in the firmware image.
+    maxItems: 1
+
+  memory-region:
+    minItems: 2
+    maxItems: 8
+    description: |
+      phandle to the reserved memory nodes to be associated with the remoteproc
+      device. There should be at least two reserved memory nodes defined. The
+      reserved memory nodes should be carveout nodes, and should be defined as
+      per the bindings in
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+    items:
+      - description: region used for dynamic DMA allocations like vrings and
+                     vring buffers
+      - description: region reserved for firmware image sections
+    additionalItems: true
+
+# Optional properties:
+# --------------------
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maxItems: 1
+    description: |
+      phandles to one or more reserved on-chip SRAM regions. The regions
+      should be defined as child nodes of the respective SRAM node, and
+      should be defined as per the generic bindings in,
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,j721e-c66-dsp
+then:
+  properties:
+    reg:
+      items:
+        - description: Address and Size of the L2 SRAM internal memory region
+        - description: Address and Size of the L1 PRAM internal memory region
+        - description: Address and Size of the L1 DRAM internal memory region
+    reg-names:
+      items:
+        - const: l2sram
+        - const: l1pram
+        - const: l1dram
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,am62a-c7xv-dsp
+          - ti,j721e-c71-dsp
+          - ti,j721s2-c71-dsp
+  then:
+    properties:
+      reg:
+        items:
+          - description: Address and Size of the L2 SRAM internal memory region
+          - description: Address and Size of the L1 DRAM internal memory region
+      reg-names:
+        items:
+          - const: l2sram
+          - const: l1dram
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-proc-ids
+  - resets
+  - firmware-name
+  - mboxes
+  - memory-region
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox0_cluster3: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        mailbox0_cluster4: mailbox-1 {
+            #mbox-cells = <1>;
+        };
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71_0 */
+                     <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+                     <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */
+
+            /* J721E C66_0 DSP node */
+            dsp@4d80800000 {
+                compatible = "ti,j721e-c66-dsp";
+                reg = <0x4d 0x80800000 0x00 0x00048000>,
+                      <0x4d 0x80e00000 0x00 0x00008000>,
+                      <0x4d 0x80f00000 0x00 0x00008000>;
+                reg-names = "l2sram", "l1pram", "l1dram";
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <142>;
+                ti,sci-proc-ids = <0x03 0xFF>;
+                resets = <&k3_reset 142 1>;
+                firmware-name = "j7-c66_0-fw";
+                memory-region = <&c66_0_dma_memory_region>,
+                                <&c66_0_memory_region>;
+                mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+            };
+
+            /* J721E C71_0 DSP node */
+            c71_0: dsp@64800000 {
+                compatible = "ti,j721e-c71-dsp";
+                reg = <0x00 0x64800000 0x00 0x00080000>,
+                      <0x00 0x64e00000 0x00 0x0000c000>;
+                reg-names = "l2sram", "l1dram";
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <15>;
+                ti,sci-proc-ids = <0x30 0xFF>;
+                resets = <&k3_reset 15 1>;
+                firmware-name = "j7-c71_0-fw";
+                memory-region = <&c71_0_dma_memory_region>,
+                                <&c71_0_memory_region>;
+                mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
new file mode 100644
index 0000000000..a492f74a86
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -0,0 +1,347 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 R5F processor subsystems
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F
+  processor subsystems/clusters (R5FSS). The dual core cluster can be used
+  either in a LockStep mode providing safety/fault tolerance features or in a
+  Split mode providing two individual compute cores for doubling the compute
+  capacity on most SoCs. These are used together with other processors present
+  on the SoC to achieve various system level goals.
+
+  AM64x SoCs do not support LockStep mode, but rather a new non-safety mode
+  called "Single-CPU" mode, where only Core0 is used, but with ability to use
+  Core1's TCMs as well.
+
+  AM62 SoC family support a single R5F core only which runs Device Manager
+  firmware and can also be used as a remote processor with IPC communication.
+
+  Each Dual-Core R5F sub-system is represented as a single DTS node
+  representing the cluster, with a pair of child DT nodes representing
+  the individual R5F cores. Each node has a number of required or optional
+  properties that enable the OS running on the host processor to perform
+  the device management of the remote processor and to communicate with the
+  remote processor.
+
+properties:
+  $nodename:
+    pattern: "^r5fss(@.*)?"
+
+  compatible:
+    enum:
+      - ti,am62-r5fss
+      - ti,am64-r5fss
+      - ti,am654-r5fss
+      - ti,j7200-r5fss
+      - ti,j721e-r5fss
+      - ti,j721s2-r5fss
+
+  power-domains:
+    description: |
+      Should contain a phandle to a PM domain provider node and an args
+      specifier containing the R5FSS device id value.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Standard ranges definition providing address translations for
+      local R5F TCM address spaces to bus addresses.
+
+# Optional properties:
+# --------------------
+
+  ti,cluster-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configuration Mode for the Dual R5F cores within the R5F cluster.
+      For most SoCs (AM65x, J721E, J7200, J721s2),
+      It should be either a value of 1 (LockStep mode) or 0 (Split mode) on
+      most SoCs (AM65x, J721E, J7200, J721s2), default is LockStep mode if
+      omitted.
+      For AM64x SoCs,
+      It  should be either a value of 0 (Split mode) or 2 (Single-CPU mode) and
+      default is Split mode if omitted.
+      For AM62x SoCs,
+      It should be set as 3 (Single-Core mode) which is also the default if
+      omitted.
+
+
+# R5F Processor Child Nodes:
+# ==========================
+
+patternProperties:
+  "^r5f@[a-f0-9]+$":
+    type: object
+    description: |
+      The R5F Sub-System device node should define two R5F child nodes, each
+      node representing a TI instantiation of the Arm Cortex R5F core. There
+      are some specific integration differences for the IP like the usage of
+      a Region Address Translator (RAT) for translating the larger SoC bus
+      addresses into a 32-bit address space for the processor. For AM62x,
+      the R5F Sub-System device node should only define one R5F child node
+      as it has only one core available.
+
+      Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)
+      internal memories split between two banks - TCMA and TCMB (further
+      interleaved into two banks TCMB0 and TCMB1). These memories (also called
+      ATCM and BTCM) provide read/write performance on par with the core's L1
+      caches. Each of the TCMs can be enabled or disabled independently and
+      either of them can be configured to appear at that R5F's address 0x0.
+
+      The cores do not use an MMU, but has a Region Address Translator
+      (RAT) module that is accessible only from the R5Fs for providing
+      translations between 32-bit CPU addresses into larger system bus
+      addresses. Cache and memory access settings are provided through a
+      Memory Protection Unit (MPU), programmable only from the R5Fs.
+
+    $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - ti,am62-r5f
+          - ti,am64-r5f
+          - ti,am654-r5f
+          - ti,j7200-r5f
+          - ti,j721e-r5f
+          - ti,j721s2-r5f
+
+      reg:
+        items:
+          - description: Address and Size of the ATCM internal memory region
+          - description: Address and Size of the BTCM internal memory region
+
+      reg-names:
+        items:
+          - const: atcm
+          - const: btcm
+
+      resets:
+        description: |
+          Should contain the phandle to the reset controller node managing the
+          local resets for this device, and a reset specifier.
+        maxItems: 1
+
+      firmware-name:
+        description: |
+          Should contain the name of the default firmware image
+          file located on the firmware search path
+
+# The following properties are mandatory for R5F Core0 in both LockStep and Split
+# modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for
+# R5F Core1 in LockStep mode:
+
+      mboxes:
+        description: |
+          OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+          communication with the remote processor. This property should match
+          with the sub-mailbox node used in the firmware image.
+        maxItems: 1
+
+      memory-region:
+        description: |
+          phandle to the reserved memory nodes to be associated with the
+          remoteproc device. There should be at least two reserved memory nodes
+          defined. The reserved memory nodes should be carveout nodes, and
+          should be defined with a "no-map" property as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        minItems: 2
+        maxItems: 8
+        items:
+          - description: region used for dynamic DMA allocations like vrings and
+                         vring buffers
+          - description: region reserved for firmware image sections
+        additionalItems: true
+
+
+# Optional properties:
+# --------------------
+# The following properties are optional properties for each of the R5F cores:
+
+      ti,atcm-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          R5F core configuration mode dictating if ATCM should be enabled. The
+          R5F address of ATCM is dictated by ti,loczrama property. Should be
+          either a value of 1 (enabled) or 0 (disabled), default is disabled
+          if omitted. Recommended to enable it for maximizing TCMs.
+
+      ti,btcm-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          R5F core configuration mode dictating if BTCM should be enabled. The
+          R5F address of BTCM is dictated by ti,loczrama property. Should be
+          either a value of 1 (enabled) or 0 (disabled), default is enabled if
+          omitted.
+
+      ti,loczrama:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          R5F core configuration mode dictating which TCM should appear at
+          address 0 (from core's view). Should be either a value of 1 (ATCM
+          at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted.
+
+      sram:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        minItems: 1
+        maxItems: 4
+        items:
+          maxItems: 1
+        description: |
+          phandles to one or more reserved on-chip SRAM regions. The regions
+          should be defined as child nodes of the respective SRAM node, and
+          should be defined as per the generic bindings in,
+          Documentation/devicetree/bindings/sram/sram.yaml
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - ti,sci
+      - ti,sci-dev-id
+      - ti,sci-proc-ids
+      - resets
+      - firmware-name
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am64-r5fss
+    then:
+      properties:
+        ti,cluster-mode:
+          enum: [0, 2]
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am654-r5fss
+            - ti,j7200-r5fss
+            - ti,j721e-r5fss
+            - ti,j721s2-r5fss
+    then:
+      properties:
+        ti,cluster-mode:
+          enum: [0, 1]
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,am62-r5fss
+    then:
+      properties:
+        ti,cluster-mode:
+          enum: [3]
+
+required:
+  - compatible
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox0: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        mailbox1: mailbox-1 {
+            #mbox-cells = <1>;
+        };
+
+        bus@100000 {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+                     <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+                     <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+                     <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>;
+
+            bus@28380000 {
+                compatible = "simple-bus";
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS */
+                         <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+                         <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+                         <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; /* MCU SRAM */
+
+                /* AM65x MCU R5FSS node */
+                mcu_r5fss0: r5fss@41000000 {
+                    compatible = "ti,am654-r5fss";
+                    power-domains = <&k3_pds 129>;
+                    ti,cluster-mode = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+                    ranges = <0x41000000 0x00 0x41000000 0x20000>,
+                             <0x41400000 0x00 0x41400000 0x20000>;
+
+                    mcu_r5f0: r5f@41000000 {
+                        compatible = "ti,am654-r5f";
+                        reg = <0x41000000 0x00008000>,
+                              <0x41010000 0x00008000>;
+                        reg-names = "atcm", "btcm";
+                        ti,sci = <&dmsc>;
+                        ti,sci-dev-id = <159>;
+                        ti,sci-proc-ids = <0x01 0xFF>;
+                        resets = <&k3_reset 159 1>;
+                        firmware-name = "am65x-mcu-r5f0_0-fw";
+                        ti,atcm-enable = <1>;
+                        ti,btcm-enable = <1>;
+                        ti,loczrama = <1>;
+                        mboxes = <&mailbox0 &mbox_mcu_r5fss0_core0>;
+                        memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+                                        <&mcu_r5fss0_core0_memory_region>;
+                        sram = <&mcu_r5fss0_core0_sram>;
+                    };
+
+                    mcu_r5f1: r5f@41400000 {
+                        compatible = "ti,am654-r5f";
+                        reg = <0x41400000 0x00008000>,
+                              <0x41410000 0x00008000>;
+                        reg-names = "atcm", "btcm";
+                        ti,sci = <&dmsc>;
+                        ti,sci-dev-id = <245>;
+                        ti,sci-proc-ids = <0x02 0xFF>;
+                        resets = <&k3_reset 245 1>;
+                        firmware-name = "am65x-mcu-r5f0_1-fw";
+                        ti,atcm-enable = <1>;
+                        ti,btcm-enable = <1>;
+                        ti,loczrama = <1>;
+                        mboxes = <&mailbox1 &mbox_mcu_r5fss0_core1>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
new file mode 100644
index 0000000000..463a97c11e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,keystone-rproc.txt
@@ -0,0 +1,182 @@
+TI Keystone DSP devices
+=======================
+
+The TI Keystone 2 family of SoCs usually have one or more (upto 8) TI DSP Core
+sub-systems that are used to offload some of the processor-intensive tasks or
+algorithms, for achieving various system level goals.
+
+These processor sub-systems usually contain additional sub-modules like L1
+and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller,
+a dedicated local power/sleep controller etc. The DSP processor core in
+Keystone 2 SoCs is usually a TMS320C66x CorePac processor.
+
+DSP Device Node:
+================
+Each DSP Core sub-system is represented as a single DT node, and should also
+have an alias with the stem 'rproc' defined. Each node has a number of required
+or optional properties that enable the OS running on the host processor (ARM
+CorePac) to perform the device management of the remote processor and to
+communicate with the remote processor.
+
+Required properties:
+--------------------
+The following are the mandatory properties:
+
+- compatible:		Should be one of the following,
+			    "ti,k2hk-dsp" for DSPs on Keystone 2 66AK2H/K SoCs
+			    "ti,k2l-dsp" for DSPs on Keystone 2 66AK2L SoCs
+			    "ti,k2e-dsp" for DSPs on Keystone 2 66AK2E SoCs
+			    "ti,k2g-dsp" for DSPs on Keystone 2 66AK2G SoCs
+
+- reg:			Should contain an entry for each value in 'reg-names'.
+			Each entry should have the memory region's start address
+			and the size of the region, the representation matching
+			the parent node's '#address-cells' and '#size-cells' values.
+
+- reg-names:		Should contain strings with the following names, each
+			representing a specific internal memory region, and
+			should be defined in this order,
+			     "l2sram", "l1pram", "l1dram"
+
+- ti,syscon-dev:	Should be a pair of the phandle to the Keystone Device
+			State Control node, and the register offset of the DSP
+			boot address register within that node's address space.
+
+- resets:		Should contain the phandle to the reset controller node
+			managing the resets for this device, and a reset
+			specifier. Please refer to either of the following reset
+			bindings for the reset argument specifier as per SoC,
+			Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
+			    for 66AK2HK/66AK2L/66AK2E SoCs or,
+			Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
+			    for 66AK2G SoCs
+
+- interrupts: 		Should contain an entry for each value in 'interrupt-names'.
+			Each entry should have the interrupt source number used by
+			the remote processor to the host processor. The values should
+			follow the interrupt-specifier format as dictated by the
+			'interrupt-parent' node. The purpose of each is as per the
+			description in the 'interrupt-names' property.
+
+- interrupt-names:	Should contain strings with the following names, each
+			representing a specific interrupt,
+			    "vring" - interrupt for virtio based IPC
+			    "exception" - interrupt for exception notification
+
+- kick-gpios: 		Should specify the gpio device needed for the virtio IPC
+			stack. This will be used to interrupt the remote processor.
+			The gpio device to be used is as per the bindings in,
+			Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
+
+SoC-specific Required properties:
+---------------------------------
+The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
+SoCs only:
+
+- clocks: 		Should contain the device's input clock, and should be
+			defined as per the bindings in,
+			Documentation/devicetree/bindings/clock/keystone-gate.txt
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the DSP device id
+			value. This property is as per the binding,
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+Optional properties:
+--------------------
+
+- memory-region:	phandle to the reserved memory node to be associated
+			with the remoteproc device. The reserved memory node
+			can be a CMA memory node, and should be defined as
+			per the bindings in
+			Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+
+Examples:
+---------
+
+1.
+	/* 66AK2H/K DSP aliases */
+	aliases {
+		rproc0 = &dsp0;
+		rproc1 = &dsp1;
+		rproc2 = &dsp2;
+		rproc3 = &dsp3;
+		rproc4 = &dsp4;
+		rproc5 = &dsp5;
+		rproc6 = &dsp6;
+		rproc7 = &dsp7;
+	};
+
+	/* 66AK2H/K DSP memory node */
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+		};
+	};
+
+	/* 66AK2H/K DSP node */
+	soc {
+		dsp0: dsp@10800000 {
+			compatible = "ti,k2hk-dsp";
+			reg = <0x10800000 0x00100000>,
+			      <0x10e00000 0x00008000>,
+			      <0x10f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			clocks = <&clkgem0>;
+			ti,syscon-dev = <&devctrl 0x40>;
+			resets = <&pscrst 0>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <0 8>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio0 27 0>;
+			memory-region = <&dsp_common_memory>;
+		};
+
+	};
+
+2.
+	/* 66AK2G DSP alias */
+	aliases {
+		rproc0 = &dsp0;
+	};
+
+	/* 66AK2G DSP memory node */
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_common_memory: dsp-common-memory@81f800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
+			reusable;
+		};
+	};
+
+	/* 66AK2G DSP node */
+	soc {
+		dsp0: dsp@10800000 {
+			compatible = "ti,k2g-dsp";
+			reg = <0x10800000 0x00100000>,
+			      <0x10e00000 0x00008000>,
+			      <0x10f00000 0x00008000>;
+			reg-names = "l2sram", "l1pram", "l1dram";
+			power-domains = <&k2g_pds 0x0046>;
+			ti,syscon-dev = <&devctrl 0x40>;
+			resets = <&k2g_reset 0x0046 0x1>;
+			interrupt-parent = <&kirq0>;
+			interrupts = <0 8>;
+			interrupt-names = "vring", "exception";
+			kick-gpios = <&dspgpio0 27 0>;
+			memory-region = <&dsp_common_memory>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
new file mode 100644
index 0000000000..94eb2033e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
@@ -0,0 +1,331 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,omap-remoteproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP4+ Remoteproc Devices
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description:
+  The OMAP family of SoCs usually have one or more slave processor sub-systems
+  that are used to offload some of the processor-intensive tasks, or to manage
+  other hardware accelerators, for achieving various system level goals.
+
+  The processor cores in the sub-system are usually behind an IOMMU, and may
+  contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2
+  caches, an Interrupt Controller, a Cache Controller etc.
+
+  The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor
+  sub-system. The DSP processor sub-system can contain any of the TI's C64x,
+  C66x or C67x family of DSP cores as the main execution unit. The IPU processor
+  sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core
+  Cortex-M4 processors.
+
+  Each remote processor sub-system is represented as a single DT node. Each node
+  has a number of required or optional properties that enable the OS running on
+  the host processor (MPU) to perform the device management of the remote
+  processor and to communicate with the remote processor. The various properties
+  can be classified as constant or variable. The constant properties are
+  dictated by the SoC and does not change from one board to another having the
+  same SoC. Examples of constant properties include 'iommus', 'reg'. The
+  variable properties are dictated by the system integration aspects such as
+  memory on the board, or configuration used within the corresponding firmware
+  image. Examples of variable properties include 'mboxes', 'memory-region',
+  'timers', 'watchdog-timers' etc.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap4-dsp
+      - ti,omap5-dsp
+      - ti,dra7-dsp
+      - ti,omap4-ipu
+      - ti,omap5-ipu
+      - ti,dra7-ipu
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+    description: |
+      phandles to OMAP IOMMU nodes, that need to be programmed
+      for this remote processor to access any external RAM memory or
+      other peripheral device address spaces. This property usually
+      has only a single phandle. Multiple phandles are used only in
+      cases where the sub-system has different ports for different
+      sub-modules within the processor sub-system (eg: DRA7 DSPs),
+      and need the same programming in both the MMUs.
+
+  mboxes:
+    minItems: 1
+    maxItems: 2
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. The specifier format is
+      as per the bindings,
+      Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
+      This property should match with the sub-mailbox node used in
+      the firmware image.
+
+  clocks:
+    maxItems: 1
+    description: |
+      Main functional clock for the remote processor
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    description: |
+      Reset handles for the remote processor
+
+  firmware-name:
+    description: |
+      Default name of the firmware to load to the remote processor.
+
+# Optional properties:
+# --------------------
+# Some of these properties are mandatory on some SoCs, and some are optional
+# depending on the configuration of the firmware image to be executed on the
+# remote processor. The conditions are mentioned for each property.
+#
+# The following are the optional properties:
+
+  memory-region:
+    maxItems: 1
+    description: |
+      phandle to the reserved memory node to be associated
+      with the remoteproc device. The reserved memory node
+      can be a CMA memory node, and should be defined as
+      per the bindings,
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+  reg:
+    description: |
+      Address space for any remoteproc memories present on
+      the SoC. Should contain an entry for each value in
+      'reg-names'. These are mandatory for all DSP and IPU
+      processors that have them (OMAP4/OMAP5 DSPs do not have
+      any RAMs)
+
+  reg-names:
+    description: |
+      Required names for each of the address spaces defined in
+      the 'reg' property. Expects the names from the following
+      list, in the specified order, each representing the corresponding
+      internal RAM memory region.
+    minItems: 1
+    items:
+      - const: l2ram
+      - const: l1pram
+      - const: l1dram
+
+  ti,bootreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the System Control Configuration region
+          - description: register offset of the boot address register
+          - description: the bit shift within the register
+    description:
+      This property is required for all the DSP instances on OMAP4, OMAP5
+      and DRA7xx SoCs.
+
+  ti,autosuspend-delay-ms:
+    description: |
+      Custom autosuspend delay for the remoteproc in milliseconds.
+      Recommended values is preferable to be in the order of couple
+      of seconds. A negative value can also be used to disable the
+      autosuspend behavior.
+
+  ti,timers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      One or more phandles to OMAP DMTimer nodes, that serve
+      as System/Tick timers for the OS running on the remote
+      processors. This will usually be a single timer if the
+      processor sub-system is running in SMP mode, or one per
+      core in the processor sub-system. This can also be used
+      to reserve specific timers to be dedicated to the
+      remote processors.
+
+      This property is mandatory on remote processors requiring
+      external tick wakeup, and to support Power Management
+      features. The timers to be used should match with the
+      timers used in the firmware image.
+
+  ti,watchdog-timers:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      One or more phandles to OMAP DMTimer nodes, used to
+      serve as Watchdog timers for the processor cores. This
+      will usually be one per executing processor core, even
+      if the processor sub-system is running a SMP OS.
+
+      The timers to be used should match with the watchdog
+      timers used in the firmware image.
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,dra7-dsp
+then:
+  properties:
+    reg:
+      minItems: 3
+      maxItems: 3
+  required:
+    - reg
+    - reg-names
+    - ti,bootreg
+
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,omap4-ipu
+          - ti,omap5-ipu
+          - ti,dra7-ipu
+  then:
+    properties:
+      reg:
+        minItems: 1
+        maxItems: 1
+      ti,bootreg: false
+    required:
+      - reg
+      - reg-names
+
+  else:
+    properties:
+      reg: false
+    required:
+      - ti,bootreg
+
+required:
+  - compatible
+  - iommus
+  - mboxes
+  - clocks
+  - resets
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+
+    //Example 1: OMAP4 DSP
+
+    /* DSP Reserved Memory node */
+    #include <dt-bindings/clock/omap4.h>
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        dsp_memory_region: dsp-memory@98000000 {
+            compatible = "shared-dma-pool";
+            reg = <0x98000000 0x800000>;
+            reusable;
+        };
+    };
+
+    /* DSP node */
+    ocp {
+        dsp: dsp {
+            compatible = "ti,omap4-dsp";
+            ti,bootreg = <&scm_conf 0x304 0>;
+            iommus = <&mmu_dsp>;
+            mboxes = <&mailbox &mbox_dsp>;
+            memory-region = <&dsp_memory_region>;
+            ti,timers = <&timer5>;
+            ti,watchdog-timers = <&timer6>;
+            clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+            resets = <&prm_tesla 0>, <&prm_tesla 1>;
+            firmware-name = "omap4-dsp-fw.xe64T";
+        };
+    };
+
+  - |+
+
+    //Example 2: OMAP5 IPU
+
+    /* IPU Reserved Memory node */
+    #include <dt-bindings/clock/omap5.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ipu_memory_region: ipu-memory@95800000 {
+            compatible = "shared-dma-pool";
+            reg = <0 0x95800000 0 0x3800000>;
+            reusable;
+        };
+    };
+
+    /* IPU node */
+    ocp {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ipu: ipu@55020000 {
+            compatible = "ti,omap5-ipu";
+            reg = <0x55020000 0x10000>;
+            reg-names = "l2ram";
+            iommus = <&mmu_ipu>;
+            mboxes = <&mailbox &mbox_ipu>;
+            memory-region = <&ipu_memory_region>;
+            ti,timers = <&timer3>, <&timer4>;
+            ti,watchdog-timers = <&timer9>, <&timer11>;
+            clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+            resets = <&prm_core 2>;
+            firmware-name = "omap5-ipu-fw.xem4";
+        };
+    };
+
+  - |+
+
+    //Example 3: DRA7xx/AM57xx DSP
+
+    /* DSP1 Reserved Memory node */
+    #include <dt-bindings/clock/dra7.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsp1_memory_region: dsp1-memory@99000000 {
+            compatible = "shared-dma-pool";
+            reg = <0x0 0x99000000 0x0 0x4000000>;
+            reusable;
+        };
+    };
+
+    /* DSP1 node */
+    ocp {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        dsp1: dsp@40800000 {
+            compatible = "ti,dra7-dsp";
+            reg = <0x40800000 0x48000>,
+                  <0x40e00000 0x8000>,
+                  <0x40f00000 0x8000>;
+            reg-names = "l2ram", "l1pram", "l1dram";
+            ti,bootreg = <&scm_conf 0x55c 0>;
+            iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+            mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+            memory-region = <&dsp1_memory_region>;
+            ti,timers = <&timer5>;
+            ti,watchdog-timers = <&timer10>;
+            resets = <&prm_dsp1 0>;
+            clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+            firmware-name = "dra7-dsp1-fw.xe66";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
new file mode 100644
index 0000000000..2811334515
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-consumer.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,pru-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PRU Consumer Common Properties
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  A PRU application/consumer/user node typically uses one or more PRU device
+  nodes to implement a PRU application/functionality. Each application/client
+  node would need a reference to at least a PRU node, and optionally define
+  some properties needed for hardware/firmware configuration. The below
+  properties are a list of common properties supported by the PRU remoteproc
+  infrastructure.
+
+  The application nodes shall define their own bindings like regular platform
+  devices, so below are in addition to each node's bindings.
+
+properties:
+  ti,prus:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: phandles to the PRU, RTU or Tx_PRU nodes used
+    minItems: 1
+    maxItems: 6
+    items:
+      maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    minItems: 1
+    maxItems: 6
+    description: |
+      firmwares for the PRU cores, the default firmware for the core from
+      the PRU node will be used if not provided. The firmware names should
+      correspond to the PRU cores listed in the 'ti,prus' property
+
+  ti,pruss-gp-mux-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      enum: [0, 1, 2, 3, 4]
+    description: |
+      array of values for the GP_MUX_SEL under PRUSS_GPCFG register for a PRU.
+      This selects the internal muxing scheme for the PRU instance. Values
+      should correspond to the PRU cores listed in the 'ti,prus' property. The
+      GP_MUX_SEL setting is a per-slice setting (one setting for PRU0, RTU0,
+      and Tx_PRU0 on K3 SoCs). Use the same value for all cores within the
+      same slice in the associative array. If the array size is smaller than
+      the size of 'ti,prus' property, the default out-of-reset value (0) for the
+      PRU core is used.
+
+required:
+  - ti,prus
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
new file mode 100644
index 0000000000..baccd98754
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,pru-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Programmable Realtime Unit (PRU) cores
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |
+  Each Programmable Real-Time Unit and Industrial Communication Subsystem
+  (PRU-ICSS or PRUSS) has two 32-bit load/store RISC CPU cores called
+  Programmable Real-Time Units (PRUs), each represented by a node. Each PRU
+  core has a dedicated Instruction RAM, Control and Debug register sets, and
+  use the Data RAMs present within the PRU-ICSS for code execution.
+
+  The K3 SoCs containing ICSSG v1.0 (eg: AM65x SR1.0) also have two Auxiliary
+  PRU cores called RTUs with slightly different IP integration. The K3 SoCs
+  containing the revised ICSSG v1.1 (eg: J721E, AM65x SR2.0) have an extra two
+  auxiliary Transmit PRU cores called Tx_PRUs that augment the PRUs. Each RTU
+  or Tx_PRU core can also be used independently like a PRU, or alongside a
+  corresponding PRU core to provide/implement auxiliary functionality/support.
+
+  Each PRU, RTU or Tx_PRU core node should be defined as a child node of the
+  corresponding PRU-ICSS node. Each node can optionally be rendered inactive by
+  using the standard DT string property, "status".
+
+  Please see the overall PRU-ICSS bindings document for additional details
+  including a complete example,
+    Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+
+properties:
+  compatible:
+    enum:
+      - ti,am3356-pru   # for AM335x SoC family (AM3356+ SoCs only)
+      - ti,am4376-pru   # for AM437x SoC family (AM4376+ SoCs only)
+      - ti,am5728-pru   # for AM57xx SoC family
+      - ti,am625-pru    # for PRUs in K3 AM62x SoC family
+      - ti,am642-pru    # for PRUs in K3 AM64x SoC family
+      - ti,am642-rtu    # for RTUs in K3 AM64x SoC family
+      - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family
+      - ti,am654-pru    # for PRUs in K3 AM65x SoC family
+      - ti,am654-rtu    # for RTUs in K3 AM65x SoC family
+      - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs
+      - ti,j721e-pru    # for PRUs in K3 J721E SoC family
+      - ti,j721e-rtu    # for RTUs in K3 J721E SoC family
+      - ti,j721e-tx-pru # for Tx_PRUs in K3 J721E SoC family
+      - ti,k2g-pru      # for 66AK2G SoC family
+
+  reg:
+    items:
+      - description: Address and Size of the PRU Instruction RAM
+      - description: Address and Size of the PRU CTRL sub-module registers
+      - description: Address and Size of the PRU Debug sub-module registers
+
+  reg-names:
+    items:
+      - const: iram
+      - const: control
+      - const: debug
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path.
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,am654-rtu
+        - ti,j721e-rtu
+        - ti,am642-rtu
+then:
+  properties:
+    $nodename:
+      pattern: "^rtu@[0-9a-f]+$"
+else:
+  if:
+    properties:
+      compatible:
+        enum:
+          - ti,am654-tx-pru
+          - ti,j721e-tx-pru
+          - ti,am642-tx-pru
+  then:
+    properties:
+      $nodename:
+        pattern: "^txpru@[0-9a-f]+"
+  else:
+    properties:
+      $nodename:
+        pattern: "^pru@[0-9a-f]+$"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - firmware-name
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM33xx PRU-ICSS */
+    pruss_tm: target-module@300000 {  /* 0x4a300000, ap 9 04.0 */
+      compatible = "ti,sysc-pruss", "ti,sysc";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x300000 0x80000>;
+
+      pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_mem: memories@0 {
+          reg = <0x0 0x2000>,
+                <0x2000 0x2000>,
+                <0x10000 0x3000>;
+          reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pru0: pru@34000 {
+          compatible = "ti,am3356-pru";
+          reg = <0x34000 0x2000>,
+                <0x22000 0x400>,
+                <0x22400 0x100>;
+          reg-names = "iram", "control", "debug";
+          firmware-name = "am335x-pru0-fw";
+        };
+
+        pru1: pru@38000 {
+          compatible = "ti,am3356-pru";
+          reg = <0x38000 0x2000>,
+                <0x24000 0x400>,
+                <0x24400 0x100>;
+          reg-names = "iram", "control", "debug";
+          firmware-name = "am335x-pru1-fw";
+        };
+      };
+    };
+
+  - |
+    /* AM65x SR2.0 ICSSG */
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    icssg0: icssg@b000000 {
+      compatible = "ti,am654-icssg";
+      reg = <0xb000000 0x80000>;
+      power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0xb000000 0x80000>;
+
+      icssg0_mem: memories@0 {
+        reg = <0x0 0x2000>,
+              <0x2000 0x2000>,
+              <0x10000 0x10000>;
+        reg-names = "dram0", "dram1", "shrdram2";
+      };
+
+      pru0_0: pru@34000 {
+        compatible = "ti,am654-pru";
+        reg = <0x34000 0x4000>,
+              <0x22000 0x100>,
+              <0x22400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-pru0_0-fw";
+      };
+
+      rtu0_0: rtu@4000 {
+        compatible = "ti,am654-rtu";
+        reg = <0x4000 0x2000>,
+              <0x23000 0x100>,
+              <0x23400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-rtu0_0-fw";
+      };
+
+      tx_pru0_0: txpru@a000 {
+        compatible = "ti,am654-tx-pru";
+        reg = <0xa000 0x1800>,
+              <0x25000 0x100>,
+              <0x25400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-txpru0_0-fw";
+      };
+
+      pru0_1: pru@38000 {
+        compatible = "ti,am654-pru";
+        reg = <0x38000 0x4000>,
+              <0x24000 0x100>,
+              <0x24400 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-pru0_1-fw";
+      };
+
+      rtu0_1: rtu@6000 {
+        compatible = "ti,am654-rtu";
+        reg = <0x6000 0x2000>,
+              <0x23800 0x100>,
+              <0x23c00 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-rtu0_1-fw";
+      };
+
+      tx_pru0_1: txpru@c000 {
+        compatible = "ti,am654-tx-pru";
+        reg = <0xc000 0x1800>,
+              <0x25800 0x100>,
+              <0x25c00 0x100>;
+        reg-names = "iram", "control", "debug";
+        firmware-name = "am65x-txpru0_1-fw";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
new file mode 100644
index 0000000000..3a70073797
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
@@ -0,0 +1,52 @@
+TI Wakeup M3 Remoteproc Driver
+==============================
+
+The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+that cannot be controlled from the MPU. This CM3 processor requires a firmware
+binary to accomplish this. The wkup_m3 remoteproc driver handles the loading of
+the firmware and booting of the CM3.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3 device node is used to represent the Wakeup M3 processor instance
+within the SoC. It is added as a child node of the parent interconnect bus
+(l4_wkup) through which it is accessible to the MPU.
+
+Required properties:
+--------------------
+- compatible:		Should be one of,
+				"ti,am3352-wkup-m3" for AM33xx SoCs
+				"ti,am4372-wkup-m3" for AM43xx SoCs
+- reg:			Should contain the address ranges for the two internal
+			memory regions, UMEM and DMEM. The parent node should
+			provide an appropriate ranges property for properly
+			translating these into bus addresses.
+- reg-names:		Contains the corresponding names for the two memory
+			regions. These should be named "umem" & "dmem".
+- ti,hwmods:		Name of the hwmod associated with the wkupm3 device.
+- ti,pm-firmware:	Name of firmware file to be used for loading and
+			booting the wkup_m3 remote processor.
+
+Example:
+--------
+/* AM33xx */
+ocp {
+	 l4_wkup: l4_wkup@44c00000 {
+		compatible = "am335-l4-wkup", "simple-bus";
+		ranges = <0 0x44c00000 0x400000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		wkup_m3: wkup_m3@100000 {
+			compatible = "ti,am3352-wkup-m3";
+			reg = <0x100000 0x4000>,
+			      <0x180000 0x2000>;
+			reg-names = "umem", "dmem";
+			ti,hwmods = "wkup_m3";
+			ti,pm-firmware = "am335x-pm-firmware.elf";
+		};
+	};
+
+	...
+};
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
new file mode 100644
index 0000000000..78aac69f10
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/xlnx,zynqmp-r5fss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx R5F processor subsystem
+
+maintainers:
+  - Ben Levinsky <ben.levinsky@amd.com>
+  - Tanmay Shah <tanmay.shah@amd.com>
+
+description: |
+  The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
+  real-time processing based on the Cortex-R5F processor core from ARM.
+  The Cortex-R5F processor implements the Arm v7-R architecture and includes a
+  floating-point unit that implements the Arm VFPv3 instruction set.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-r5fss
+
+  xlnx,cluster-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+    description: |
+      The RPU MPCore can operate in split mode (Dual-processor performance), Safety
+      lock-step mode(Both RPU cores execute the same code in lock-step,
+      clock-for-clock) or Single CPU mode (RPU core 0 is held in reset while
+      core 1 runs normally). The processor does not support dynamic configuration.
+      Switching between modes is only permitted immediately after a processor reset.
+      If set to  1 then lockstep mode and if 0 then split mode.
+      If set to  2 then single CPU mode. When not defined, default will be lockstep mode.
+      In summary,
+      0: split mode
+      1: lockstep mode (default)
+      2: single cpu mode
+
+patternProperties:
+  "^r5f-[a-f0-9]+$":
+    type: object
+    description: |
+      The RPU is located in the Low Power Domain of the Processor Subsystem.
+      Each processor includes separate L1 instruction and data caches and
+      tightly coupled memories (TCM). System memory is cacheable, but the TCM
+      memory space is non-cacheable.
+
+      Each RPU contains one 64KB memory and two 32KB memories that
+      are accessed via the TCM A and B port interfaces, for a total of 128KB
+      per processor. In lock-step mode, the processor has access to 256KB of
+      TCM memory.
+
+    properties:
+      compatible:
+        const: xlnx,zynqmp-r5f
+
+      power-domains:
+        maxItems: 1
+
+      mboxes:
+        minItems: 1
+        items:
+          - description: mailbox channel to send data to RPU
+          - description: mailbox channel to receive data from RPU
+
+      mbox-names:
+        minItems: 1
+        items:
+          - const: tx
+          - const: rx
+
+      sram:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        minItems: 1
+        maxItems: 8
+        items:
+          maxItems: 1
+        description: |
+          phandles to one or more reserved on-chip SRAM regions. Other than TCM,
+          the RPU can execute instructions and access data from the OCM memory,
+          the main DDR memory, and other system memories.
+
+          The regions should be defined as child nodes of the respective SRAM
+          node, and should be defined as per the generic bindings in
+          Documentation/devicetree/bindings/sram/sram.yaml
+
+      memory-region:
+        description: |
+          List of phandles to the reserved memory regions associated with the
+          remoteproc device. This is variable and describes the memories shared with
+          the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+          vrings, ...). This reserved memory region will be allocated in DDR memory.
+        minItems: 1
+        maxItems: 8
+        items:
+          - description: region used for RPU firmware image section
+          - description: vdev buffer
+          - description: vring0
+          - description: vring1
+        additionalItems: true
+
+    required:
+      - compatible
+      - power-domains
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    remoteproc {
+        compatible = "xlnx,zynqmp-r5fss";
+        xlnx,cluster-mode = <1>;
+
+        r5f-0 {
+            compatible = "xlnx,zynqmp-r5f";
+            power-domains = <&zynqmp_firmware 0x7>;
+            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+            mbox-names = "tx", "rx";
+        };
+
+        r5f-1 {
+            compatible = "xlnx,zynqmp-r5f";
+            power-domains = <&zynqmp_firmware 0x8>;
+            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+            mbox-names = "tx", "rx";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
new file mode 100644
index 0000000000..851ec24d61
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/framebuffer.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/framebuffer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: /reserved-memory framebuffer node
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: framebuffer
+    description: >
+      This indicates a region of memory meant to be used as a framebuffer for
+      a set of display devices. It can be used by an operating system to keep
+      the framebuffer from being overwritten and use it as the backing memory
+      for a display device (such as simple-framebuffer).
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    / {
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        chosen {
+            framebuffer {
+                compatible = "simple-framebuffer";
+                memory-region = <&fb>;
+            };
+        };
+
+        reserved-memory {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            fb: framebuffer@80000000 {
+                compatible = "framebuffer";
+                reg = <0x80000000 0x007e9000>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml b/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml
new file mode 100644
index 0000000000..c591ec37d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/google,open-dice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open Profile for DICE
+
+description: |
+  This binding represents a reserved memory region containing data
+  generated by the Open Profile for DICE protocol.
+
+  See https://pigweed.googlesource.com/open-dice/
+
+maintainers:
+  - David Brazdil <dbrazdil@google.com>
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: google,open-dice
+
+  reg:
+    description: page-aligned region of memory containing DICE data
+
+required:
+  - compatible
+  - reg
+  - no-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        dice: dice@12340000 {
+            compatible = "google,open-dice";
+            reg = <0x00 0x12340000 0x2000>;
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
new file mode 100644
index 0000000000..592f180e6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/memory-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reserved Memory Region
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+description: |
+  Regions in the /reserved-memory node may be referenced by other device
+  nodes by adding a memory-region property to the device node.
+
+select: true
+
+properties:
+  memory-region:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: >
+      Phandle to a /reserved-memory child node assigned to the device.
+
+  memory-region-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      A list of names, one for each corresponding entry in the
+      memory-region property
+
+additionalProperties: true
+
+examples:
+  - |
+    fb0: video@12300000 {
+        /* ... */
+        reg = <0x12300000 0x1000>;
+        memory-region = <&display_reserved>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
new file mode 100644
index 0000000000..e2ace3df94
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra210-emc-table.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 EMC Frequency Table
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: On Tegra210, firmware passes a binary representation of the
+  EMC frequency table via a reserved memory region.
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc-table
+
+  reg:
+    description: region of memory reserved by firmware to pass the EMC
+      frequency table
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml
new file mode 100644
index 0000000000..f9b2f0fdc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra264-bpmp-shmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra CPU-NS - BPMP IPC reserved memory
+
+maintainers:
+  - Peter De Schrijver <pdeschrijver@nvidia.com>
+
+description: |
+  Define a memory region used for communication between CPU-NS and BPMP.
+  Typically this node is created by the bootloader as the physical address
+  has to be known to both CPU-NS and BPMP for correct IPC operation.
+  The memory region is defined using a child node under /reserved-memory.
+  The sub-node is named shmem@<address>.
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: nvidia,tegra264-bpmp-shmem
+
+  reg:
+    description: The physical address and size of the shared SDRAM region
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - no-map
+
+examples:
+  - |
+    reserved-memory {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       dram_cpu_bpmp_mail: shmem@f1be0000 {
+           compatible = "nvidia,tegra264-bpmp-shmem";
+           reg = <0x0 0xf1be0000 0x0 0x2000>;
+           no-map;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/phram.yaml b/Documentation/devicetree/bindings/reserved-memory/phram.yaml
new file mode 100644
index 0000000000..65c7cacf9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/phram.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/phram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTD/block device in RAM
+
+description: |
+  Specifies that the reserved memory region can be used as an MTD or block
+  device.
+
+  The "phram" node is named after the "MTD in PHysical RAM" driver which
+  provides an implementation of this functionality in Linux.
+
+maintainers:
+  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+
+allOf:
+  - $ref: reserved-memory.yaml
+  - $ref: /schemas/mtd/mtd.yaml
+
+properties:
+  compatible:
+    const: phram
+
+  reg:
+    description: region of memory that can be used as an MTD/block device
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        phram: flash@12340000 {
+            compatible = "phram";
+            label = "rootfs";
+            reg = <0x12340000 0x00800000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml
new file mode 100644
index 0000000000..610f8ef37e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/qcom,cmd-db.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Command DB
+
+description: |
+  Command DB is a database that provides a mapping between resource key and the
+  resource address for a system resource managed by a remote processor. The data
+  is stored in a shared memory region and is loaded by the remote processor.
+
+  Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+  controlling shared resources. Depending on the board configuration the shared
+  resource properties may change. These properties are dynamically probed by the
+  remote processor and made available in the shared memory.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: qcom,cmd-db
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        reserved-memory@85fe0000 {
+            reg = <0x85fe0000 0x20000>;
+            compatible = "qcom,cmd-db";
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
new file mode 100644
index 0000000000..bab982f004
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/qcom,rmtfs-mem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Remote File System Memory
+
+description: |
+  This binding describes the Qualcomm remote filesystem memory, which serves the
+  purpose of describing the shared memory region used for remote processors to
+  access block device data using the Remote Filesystem protocol.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: qcom,rmtfs-mem
+
+  qcom,client-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      identifier of the client to use this region for buffers
+
+  qcom,vmid:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Array of vmids of the remote processors, to set up memory protection
+    minItems: 1
+    maxItems: 2
+
+required:
+  - qcom,client-id
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rmtfs@86700000 {
+            compatible = "qcom,rmtfs-mem";
+            reg = <0x86700000 0xe0000>;
+            no-map;
+
+            qcom,client-id = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
new file mode 100644
index 0000000000..45cc39ecc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/ramoops.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ramoops oops/panic logger
+
+description: |
+  ramoops provides persistent RAM storage for oops and panics, so they can be
+  recovered after a reboot. This is a child-node of "/reserved-memory", and
+  is named "ramoops" after the backend, rather than "pstore" which is the
+  subsystem.
+
+  Parts of this storage may be set aside for other persistent log buffers, such
+  as kernel log messages, or for optional ECC error-correction data.  The total
+  size of these optional buffers must fit in the reserved region.
+
+  Any remaining space will be used for a circular buffer of oops and panic
+  records.  These records have a configurable size, with a size of 0 indicating
+  that they should be disabled.
+
+  At least one of "record-size", "console-size", "ftrace-size", or "pmsg-size"
+  must be set non-zero, but are otherwise optional as listed below.
+
+maintainers:
+  - Kees Cook <keescook@chromium.org>
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    const: ramoops
+
+  reg:
+    description: region of memory that is preserved between reboots
+
+  ecc-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: enables ECC support and specifies ECC buffer size in bytes
+    default: 0 # no ECC
+
+  record-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum size in bytes of each kmsg dump
+    default: 0
+
+  console-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size in bytes of log buffer reserved for kernel messages
+    default: 0
+
+  ftrace-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size in bytes of log buffer reserved for function tracing and profiling
+    default: 0
+
+  pmsg-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size in bytes of log buffer reserved for userspace messages
+    default: 0
+
+  mem-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: if present, sets the type of mapping is to be used to map the reserved region.
+    default: 0
+    oneOf:
+      - const: 0
+        description: write-combined
+      - const: 1
+        description: unbuffered
+      - const: 2
+        description: cached
+
+  max-reason:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2 # log oopses and panics
+    maximum: 0x7fffffff
+    description: |
+      If present, sets maximum type of kmsg dump reasons to store.
+      This can be set to INT_MAX to store all kmsg dumps.
+      See include/linux/kmsg_dump.h KMSG_DUMP_* for other kmsg dump reason values.
+      Setting this to 0 (KMSG_DUMP_UNDEF), means the reason filtering will be
+      controlled by the printk.always_kmsg_dump boot param.
+      If unset, it will be 2 (KMSG_DUMP_OOPS), otherwise 5 (KMSG_DUMP_MAX).
+
+  flags:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: |
+      If present, pass ramoops behavioral flags
+      (see include/linux/pstore_ram.h RAMOOPS_FLAG_* for flag values).
+
+  no-dump-oops:
+    deprecated: true
+    type: boolean
+    description: |
+      Use max_reason instead. If present, and max_reason is not specified,
+      it is equivalent to max_reason = 1 (KMSG_DUMP_PANIC).
+
+  unbuffered:
+    deprecated: true
+    type: boolean
+    description: |
+      Use mem_type instead. If present, and mem_type is not specified,
+      it is equivalent to mem_type = 1 and uses unbuffered mappings to map
+      the reserved region (defaults to buffered mappings mem_type = 0).
+      If both are specified -- "mem_type" overrides "unbuffered".
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required: [record-size]
+  - required: [console-size]
+  - required: [ftrace-size]
+  - required: [pmsg-size]
+
+examples:
+  - |
+    / {
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        reserved-memory {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            ramoops@bfdf0000 {
+                compatible = "ramoops";
+                reg = <0xbfdf0000 0x10000>; /* 64kB */
+                console-size = <0x8000>;    /* 32kB */
+                record-size = <0x400>;      /*  1kB */
+                ecc-size = <16>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
new file mode 100644
index 0000000000..1810701a85
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -0,0 +1 @@
+This file has been moved to reserved-memory.yaml.
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
new file mode 100644
index 0000000000..c680e397cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: /reserved-memory Child Node Common
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+description: >
+  Reserved memory is specified as a node under the /reserved-memory node. The
+  operating system shall exclude reserved memory from normal usage one can
+  create child nodes describing particular reserved (excluded from normal use)
+  memory regions. Such memory regions are usually designed for the special
+  usage by various device drivers.
+
+  Each child of the reserved-memory node specifies one or more regions
+  of reserved memory. Each child node may either use a 'reg' property to
+  specify a specific range of reserved memory, or a 'size' property with
+  optional constraints to request a dynamically allocated block of
+  memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node (ie. "framebuffer" or "dma-pool").
+  Unit address (@<address>) should be appended to the name if the node
+  is a static allocation.
+
+properties:
+  reg: true
+
+  size:
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
+    description: >
+      Length based on parent's \#size-cells. Size in bytes of memory to
+      reserve.
+
+  alignment:
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
+    description: >
+      Length based on parent's \#size-cells. Address boundary for
+      alignment of allocation.
+
+  alloc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Address and Length pairs. Specifies regions of memory that are
+      acceptable to allocate from.
+
+  iommu-addresses:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: >
+      A list of phandle and specifier pairs that describe static IO virtual
+      address space mappings and carveouts associated with a given reserved
+      memory region. The phandle in the first cell refers to the device for
+      which the mapping or carveout is to be created.
+
+      The specifier consists of an address/size pair and denotes the IO
+      virtual address range of the region for the given device. The exact
+      format depends on the values of the "#address-cells" and "#size-cells"
+      properties of the device referenced via the phandle.
+
+      When used in combination with a "reg" property, an IOVA mapping is to
+      be established for this memory region. One example where this can be
+      useful is to create an identity mapping for physical memory that the
+      firmware has configured some hardware to access (such as a bootsplash
+      framebuffer).
+
+      If no "reg" property is specified, the "iommu-addresses" property
+      defines carveout regions in the IOVA space for the given device. This
+      can be useful if a certain memory region should not be mapped through
+      the IOMMU.
+
+  no-map:
+    type: boolean
+    description: >
+      Indicates the operating system must not create a virtual mapping
+      of the region as part of its standard mapping of system memory,
+      nor permit speculative access to it under any circumstances other
+      than under the control of the device driver using the region.
+
+  reusable:
+    type: boolean
+    description: >
+      The operating system can use the memory in this region with the
+      limitation that the device driver(s) owning the region need to be
+      able to reclaim it back. Typically that means that the operating
+      system can use that region to store volatile or cached data that
+      can be otherwise regenerated or migrated elsewhere.
+
+allOf:
+  - if:
+      required:
+        - no-map
+
+    then:
+      not:
+        required:
+          - reusable
+
+  - if:
+      required:
+        - reusable
+
+    then:
+      not:
+        required:
+          - no-map
+
+oneOf:
+  - oneOf:
+      - required:
+          - reg
+
+      - required:
+          - size
+
+  - oneOf:
+      # IOMMU reservations
+      - required:
+          - iommu-addresses
+
+      # IOMMU mappings
+      - required:
+          - reg
+          - iommu-addresses
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+      compatible = "foo";
+      model = "foo";
+
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        adsp_resv: reservation-adsp {
+          /*
+           * Restrict IOVA mappings for ADSP buffers to the 512 MiB region
+           * from 0x40000000 - 0x5fffffff. Anything outside is reserved by
+           * the ADSP for I/O memory and private memory allocations.
+           */
+          iommu-addresses = <&adsp 0x0 0x00000000 0x00 0x40000000>,
+                            <&adsp 0x0 0x60000000 0xff 0xa0000000>;
+        };
+
+        fb: framebuffer@90000000 {
+          reg = <0x0 0x90000000 0x0 0x00800000>;
+          iommu-addresses = <&dc0 0x0 0x90000000 0x0 0x00800000>;
+        };
+      };
+
+      bus@0 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0x0 0x40000000>;
+
+        adsp: adsp@2990000 {
+          reg = <0x2990000 0x2000>;
+          memory-region = <&adsp_resv>;
+        };
+
+        dc0: display@15200000 {
+          reg = <0x15200000 0x10000>;
+          memory-region = <&fb>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
new file mode 100644
index 0000000000..457de0920c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/shared-dma-pool.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: /reserved-memory DMA pool
+
+maintainers:
+  - devicetree-spec@vger.kernel.org
+
+allOf:
+  - $ref: reserved-memory.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - const: shared-dma-pool
+        description: >
+          This indicates a region of memory meant to be used as a shared
+          pool of DMA buffers for a set of devices. It can be used by an
+          operating system to instantiate the necessary pool management
+          subsystem if necessary.
+
+      - const: restricted-dma-pool
+        description: >
+          This indicates a region of memory meant to be used as a pool
+          of restricted DMA buffers for a set of devices. The memory
+          region would be the only region accessible to those devices.
+          When using this, the no-map and reusable properties must not
+          be set, so the operating system can create a virtual mapping
+          that will be used for synchronization. The main purpose for
+          restricted DMA is to mitigate the lack of DMA access control
+          on systems without an IOMMU, which could result in the DMA
+          accessing the system memory at unexpected times and/or
+          unexpected addresses, possibly leading to data leakage or
+          corruption. The feature on its own provides a basic level of
+          protection against the DMA overwriting buffer contents at
+          unexpected times. However, to protect against general data
+          leakage and system memory corruption, the system needs to
+          provide way to lock down the memory access, e.g., MPU. Note
+          that since coherent allocation needs remapping, one must set
+          up another device coherent pool by shared-dma-pool and use
+          dma_alloc_from_dev_coherent instead for atomic coherent
+          allocation.
+
+  linux,cma-default:
+    type: boolean
+    description: >
+      If this property is present, then Linux will use the region for
+      the default pool of the contiguous memory allocator.
+
+  linux,dma-default:
+    type: boolean
+    description: >
+      If this property is present, then Linux will use the region for
+      the default pool of the consistent DMA allocator.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: restricted-dma-pool
+then:
+  properties:
+    no-map: false
+    reusable: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      reserved-memory {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+
+          /* global autoconfigured region for contiguous allocations */
+          linux,cma {
+              compatible = "shared-dma-pool";
+              reusable;
+              size = <0x4000000>;
+              alignment = <0x2000>;
+              linux,cma-default;
+          };
+
+          display_reserved: framebuffer@78000000 {
+              reg = <0x78000000 0x800000>;
+          };
+
+          restricted_dma_reserved: restricted-dma-pool@50000000 {
+              compatible = "restricted-dma-pool";
+              reg = <0x50000000 0x4000000>;
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt b/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt
new file mode 100644
index 0000000000..d483a2103d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/xen,shared-memory.txt
@@ -0,0 +1,24 @@
+* Xen hypervisor reserved-memory binding
+
+Expose one or more memory regions as reserved-memory to the guest
+virtual machine. Typically, a region is configured at VM creation time
+to be a shared memory area across multiple virtual machines for
+communication among them.
+
+For each of these pre-shared memory regions, a range is exposed under
+the /reserved-memory node as a child node. Each range sub-node is named
+xen-shmem@<address> and has the following properties:
+
+- compatible:
+	compatible = "xen,shared-memory-v1"
+
+- reg:
+	the base guest physical address and size of the shared memory region
+
+- xen,offset: (borrower VMs only)
+	64 bit integer offset within the owner virtual machine's shared
+	memory region used for the mapping in the borrower VM.
+
+- xen,id:
+	a string that identifies the shared memory region as specified in
+	the VM config file
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
new file mode 100644
index 0000000000..2a248e511c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral Reset Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun6i-a31-ahb1-reset
+          - allwinner,sun6i-a31-clock-reset
+
+  # The PRCM on the A31 and A23 will have the reg property missing,
+  # since it's set at the upper level node, and will be validated by
+  # PRCM's schema. Make sure we only validate standalone nodes.
+  required:
+    - compatible
+    - reg
+
+properties:
+  "#reset-cells":
+    const: 1
+    description: >
+      This additional argument passed to that reset controller is the
+      offset of the bit controlling this particular reset line in the
+      register.
+
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-ahb1-reset
+      - allwinner,sun6i-a31-clock-reset
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#reset-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb1_rst: reset@1c202c0 {
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-ahb1-reset";
+        reg = <0x01c202c0 0xc>;
+    };
+
+  - |
+    apbs_rst: reset@80014b0 {
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-clock-reset";
+        reg = <0x080014b0 0x4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
new file mode 100644
index 0000000000..761c70cf9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Reset Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Cyclone5/Arria5/Arria10
+        const: altr,rst-mgr
+      - description: Stratix10 ARM64 SoC
+        items:
+          - const: altr,stratix10-rst-mgr
+          - const: altr,rst-mgr
+
+  reg:
+    maxItems: 1
+
+  altr,modrst-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset of the first modrst register
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: altr,stratix10-rst-mgr
+then:
+  properties:
+    altr,modrst-offset: false
+
+additionalProperties: false
+
+examples:
+  - |
+    rstmgr@ffd05000 {
+        compatible = "altr,rst-mgr";
+        reg = <0xffd05000 0x1000>;
+        altr,modrst-offset = <0x10>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
new file mode 100644
index 0000000000..bc1d284785
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic audio memory arbiter controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description: The Amlogic Audio ARB is a simple device which enables or disables
+  the access of Audio FIFOs to DDR on AXG based SoC.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-axg-audio-arb
+      - amlogic,meson-sm1-audio-arb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      phandle to the fifo peripheral clock provided by the audio clock
+      controller.
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // on the A113 SoC:
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        arb: reset-controller@280 {
+            compatible = "amlogic,meson-axg-audio-arb";
+            reg = <0x0 0x280 0x0 0x4>;
+            #reset-cells = <1>;
+            clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
new file mode 100644
index 0000000000..d3fdee89d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/amlogic,meson-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SoC Reset Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson8b-reset # Reset Controller on Meson8b and compatible SoCs
+      - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
+      - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
+      - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+      - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@c884404 {
+          compatible = "amlogic,meson-gxbb-reset";
+          reg = <0xc884404 0x20>;
+          #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
new file mode 100644
index 0000000000..98465d2694
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/atmel,at91sam9260-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip System Reset Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  The system reset controller can be used to reset the CPU. In case of
+  SAMA7G5 it can also reset some devices (e.g. USB PHYs).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-rstc
+              - atmel,at91sam9g45-rstc
+              - atmel,sama5d3-rstc
+              - microchip,sam9x60-rstc
+              - microchip,sama7g5-rstc
+      - items:
+          - const: atmel,sama5d3-rstc
+          - const: atmel,at91sam9g45-rstc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base registers for system reset control
+      - description: registers for device specific reset control
+
+  clocks:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sama7g5-rstc
+    then:
+      required:
+        - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+
+    reset-controller@fffffd00 {
+        compatible = "atmel,at91sam9260-rstc";
+        reg = <0xfffffd00 0x10>;
+        clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
new file mode 100644
index 0000000000..1f40b654f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain BM1880 SoC Reset Controller
+
+maintainers:
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    const: bitmain,bm1880-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@c00 {
+        compatible = "bitmain,bm1880-reset";
+        reg = <0xc00 0x8>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml
new file mode 100644
index 0000000000..88aebb3708
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm4908-misc-pcie-reset.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom MISC block PCIe reset controller
+
+description: This document describes reset controller handling PCIe PERST#
+  signals. On BCM4908 it's a part of the MISC block.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm4908-misc-pcie-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    description: PCIe core id
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@ff802644 {
+        compatible = "brcm,bcm4908-misc-pcie-reset";
+        reg = <0xff802644 0x04>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt
new file mode 100644
index 0000000000..a98872d278
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt
@@ -0,0 +1,19 @@
+Broadcom BCM63138 Processor Monitor Bus binding
+===============================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Require properties:
+
+- compatible: must be "brcm,bcm63138-pmb"
+- reg: base register address and size for this bus controller
+- #reset-cells: must be 2 first cell is the address within the bus instance designated
+  by the phandle, and the second is the number of zones for this peripheral
+
+Example:
+	pmb0: reset-controller@4800c0 {
+		compatible = "brcm,bcm63138-pmb";
+		reg = <0x4800c0 0x10>;
+		#reset-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml
new file mode 100644
index 0000000000..00150b93fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm6345-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM6345 reset controller
+
+description: This document describes the BCM6345 reset controller.
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm6345-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@10000010 {
+      compatible = "brcm,bcm6345-reset";
+      reg = <0x10000010 0x4>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
new file mode 100644
index 0000000000..34cfc642d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Broadcom
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,bcm7216-pcie-sata-rescal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM7216 RESCAL reset controller
+
+description: This document describes the BCM7216 RESCAL reset controller
+  which is responsible for controlling the reset of the SATA and PCIe0/1
+  instances on BCM7216.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Jim Quinlan <jim2101024@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm7216-pcie-sata-rescal
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@8b2c800 {
+          compatible = "brcm,bcm7216-pcie-sata-rescal";
+          reg = <0x8b2c800 0x10>;
+          #reset-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml
new file mode 100644
index 0000000000..b115b86e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB SW_INIT-style reset controller
+
+description:
+  Broadcom STB SoCs have a SW_INIT-style reset controller with separate
+  SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
+  reset lines.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,brcmstb-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@8404318 {
+      compatible = "brcm,brcmstb-reset";
+      reg = <0x8404318 0x30>;
+      #reset-cells = <1>;
+    };
+
+    ethernet_switch {
+      resets = <&reset 26>;
+      reset-names = "switch";
+    };
diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
new file mode 100644
index 0000000000..0c0135964b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Reset Controller
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description: |
+  Canaan Kendryte K210 reset controller driver which supports the SoC
+  system controller supplied reset registers for the various peripherals
+  of the SoC. The K210 reset controller node must be defined as a child
+  node of the K210 system controller node.
+
+  See also:
+  - dt-bindings/reset/k210-rst.h
+
+properties:
+  compatible:
+    const: canaan,k210-rst
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - '#reset-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/k210-rst.h>
+    sysrst: reset-controller {
+      compatible = "canaan,k210-rst";
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
new file mode 100644
index 0000000000..0e5ee8decc
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/delta,tn48m-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD reset controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Reset controller modules provides resets for the following:
+  * 88F7040 SoC
+  * 88F6820 SoC
+  * 98DX3265 switch MAC-s
+  * 88E1680 PHY-s
+  * 88E1512 PHY
+  * PoE PSE controller
+
+properties:
+  compatible:
+    const: delta,tn48m-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
new file mode 100644
index 0000000000..b11ac533f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX System Reset Controller
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The system reset controller can be used to reset the GPU, VPU,
+  IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+  nodes should specify the reset line on the SRC in their resets
+  property, containing a phandle to the SRC device node and a
+  RESET_INDEX specifying which module to reset, as described in
+  reset.txt
+
+  The following RESET_INDEX values are valid for i.MX5:
+    GPU_RESET     0
+    VPU_RESET     1
+    IPU1_RESET    2
+    OPEN_VG_RESET 3
+  The following additional RESET_INDEX value is valid for i.MX6:
+    IPU2_RESET    4
+
+properties:
+  compatible:
+    oneOf:
+      - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx50-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx53-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6q-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sx-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sl-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6ul-src"
+          - const: "fsl,imx51-src"
+      - items:
+          - const: "fsl,imx6sll-src"
+          - const: "fsl,imx51-src"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: SRC interrupt
+      - description: CPU WDOG interrupts out of SRC
+    minItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@73fd0000 {
+        compatible = "fsl,imx51-src";
+        reg = <0x73fd0000 0x4000>;
+        interrupts = <75>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
new file mode 100644
index 0000000000..00430e2eab
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/fsl,imx7-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7 System Reset Controller
+
+maintainers:
+  - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+  The system reset controller can be used to reset various set of
+  peripherals. Device nodes that need access to reset lines should
+  specify them as a reset phandle in their corresponding node as
+  specified in reset.txt.
+
+  For list of all valid reset indices see
+    <dt-bindings/reset/imx7-reset.h> for i.MX7,
+    <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ, i.MX8MM and i.MX8MN,
+    <dt-bindings/reset/imx8mp-reset.h> for i.MX8MP.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx7d-src
+              - fsl,imx8mq-src
+              - fsl,imx8mp-src
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx8mm-src
+              - fsl,imx8mn-src
+          - const: fsl,imx8mq-src
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reset-controller@30390000 {
+        compatible = "fsl,imx7d-src", "syscon";
+        reg = <0x30390000 0x2000>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
new file mode 100644
index 0000000000..cdfcf32c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/hisilicon,hi3660-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon System Reset Controller
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: |
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+  The reset controller registers are part of the system-ctl block on
+  hi3660 and hi3670 SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-reset
+      - items:
+          - const: hisilicon,hi3670-reset
+          - const: hisilicon,hi3660-reset
+
+  hisi,rst-syscon:
+    deprecated: true
+    description: phandle of the reset's syscon, use hisilicon,rst-syscon instead
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  hisilicon,rst-syscon:
+    description: phandle of the reset's syscon.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#reset-cells':
+    description: |
+      Specifies the number of cells needed to encode a reset source.
+      Cell #1 : offset of the reset assert control register from the syscon
+                register base
+                offset + 4: deassert control register
+                offset + 8: status control register
+      Cell #2 : bit position of the reset in the reset control register
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+
+    iomcu: iomcu@ffd7e000 {
+        compatible = "hisilicon,hi3660-iomcu", "syscon";
+        reg = <0xffd7e000 0x1000>;
+    };
+
+    iomcu_rst: iomcu_rst_controller {
+        compatible = "hisilicon,hi3660-reset";
+        hisilicon,rst-syscon = <&iomcu>;
+        #reset-cells = <2>;
+    };
+
+    /* Specifying reset lines connected to IP modules */
+    i2c@ffd71000 {
+        compatible = "snps,designware-i2c";
+        reg = <0xffd71000 0x1000>;
+        interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <400000>;
+        clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+        resets = <&iomcu_rst 0x20 3>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt
new file mode 100644
index 0000000000..8c05d16367
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt
@@ -0,0 +1,55 @@
+Pistachio Reset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable individual IP blocks within the Pistachio SoC using "soft reset"
+control bits found in the Pistachio SoC top level registers.
+
+The actual action taken when soft reset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers, and following an assert/deassert sequence the hardware's previous
+state may no longer be valid.
+
+Please refer to Documentation/devicetree/bindings/reset/reset.txt
+for common reset controller binding usage.
+
+Required properties:
+
+- compatible: Contains "img,pistachio-reset"
+
+- #reset-cells: Contains 1
+
+Example:
+
+	cr_periph: clk@18148000 {
+		compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd";
+		reg = <0x18148000 0x1000>;
+		clocks = <&clk_periph PERIPH_CLK_SYS>;
+		clock-names = "sys";
+		#clock-cells = <1>;
+
+		pistachio_reset: reset-controller {
+			compatible = "img,pistachio-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+Specifying reset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the pistachio reset device node and an
+index specifying which reset to use, as described in
+Documentation/devicetree/bindings/reset/reset.txt.
+
+Example:
+
+	spdif_out: spdif-out@18100d00 {
+		...
+		resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+		reset-names = "rst";
+		...
+	};
+
+Macro definitions for the supported resets can be found in:
+include/dt-bindings/reset/pistachio-resets.h
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
new file mode 100644
index 0000000000..13bf6bb3f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/intel,rcu-gw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Reset Controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - intel,rcu-lgm
+      - intel,rcu-xrx200
+
+  reg:
+    description: Reset controller registers.
+    maxItems: 1
+
+  intel,global-reset:
+    description: Global reset register offset and bit offset.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Register offset
+      - description: Register bit offset
+        minimum: 0
+        maximum: 31
+
+  "#reset-cells":
+    minimum: 2
+    maximum: 3
+    description: |
+      First cell is reset request register offset.
+      Second cell is bit offset in reset request register.
+      Third cell is bit offset in reset status register.
+      For LGM SoC, reset cell count is 2 as bit offset in
+      reset request and reset status registers is same. Whereas
+      3 for legacy SoCs as bit offset differs.
+
+required:
+  - compatible
+  - reg
+  - intel,global-reset
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rcu0: reset-controller@e0000000 {
+        compatible = "intel,rcu-lgm";
+        reg = <0xe0000000 0x20000>;
+        intel,global-reset = <0x10 30>;
+        #reset-cells = <2>;
+    };
+
+    pwm: pwm@e0d00000 {
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        clocks = <&cgu0 1>;
+        #pwm-cells = <2>;
+        resets = <&rcu0 0x30 21>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
new file mode 100644
index 0000000000..15d65a5dd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU reset controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  This binding describes a reset-controller found on the RCU module on Lantiq
+  XWAY SoCs. This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+  compatible:
+    enum:
+      - lantiq,danube-reset
+      - lantiq,xrx200-reset
+
+  reg:
+    description: |
+      Defines the following sets of registers in the parent syscon device
+      Offset of the reset set register
+      Offset of the reset status register
+    maxItems: 2
+
+  '#reset-cells':
+    description: |
+      The first cell takes the reset set bit and the second cell takes the
+      status bit.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // On the xRX200 SoCs:
+    reset0: reset-controller@10 {
+        compatible = "lantiq,xrx200-reset";
+        reg = <0x10 0x04>, <0x14 0x04>;
+        #reset-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
new file mode 100644
index 0000000000..dc86568bfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Antoine Tenart <atenart@kernel.org>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Berlin reset controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+  controller node on Berlin SoCs.
+
+properties:
+  compatible:
+    const: marvell,berlin2-reset
+
+  "#reset-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chip: chip-control@ea0000 {
+        reg = <0xea0000 0x400>;
+
+        chip_rst: reset {
+            compatible = "marvell,berlin2-reset";
+            #reset-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
new file mode 100644
index 0000000000..f2da0693b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/microchip,rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Switch Reset Controller
+
+maintainers:
+  - Steen Hegelund <steen.hegelund@microchip.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  The Microchip Sparx5 Switch provides reset control and implements the following
+  functions
+    - One Time Switch Core Reset (Soft Reset)
+
+properties:
+  $nodename:
+    pattern: "^reset-controller@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - microchip,sparx5-switch-reset
+      - microchip,lan966x-switch-reset
+
+  reg:
+    items:
+      - description: global control block registers
+
+  reg-names:
+    items:
+      - const: gcb
+
+  "#reset-cells":
+    const: 1
+
+  cpu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: syscon used to access CPU reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+  - cpu-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11010008 {
+        compatible = "microchip,sparx5-switch-reset";
+        reg = <0x11010008 0x4>;
+        reg-names = "gcb";
+        #reset-cells = <1>;
+        cpu-syscon = <&cpu_ctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
new file mode 100644
index 0000000000..34c5c1c08e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,ma35d1-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Reset Controller
+
+maintainers:
+  - Chi-Fang Li <cfli0@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+description:
+  The system reset controller can be used to reset various peripheral
+  controllers in MA35D1 SoC.
+
+properties:
+  compatible:
+    items:
+      - const: nuvoton,ma35d1-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # system reset controller node:
+  - |
+
+    system-management@40460000 {
+        compatible = "nuvoton,ma35d1-reset";
+        reg = <0x40460000 0x200>;
+        #reset-cells = <1>;
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
new file mode 100644
index 0000000000..d82e65e37c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Reset controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-reset        # Poleg NPCM7XX SoC
+      - nuvoton,npcm845-reset        # Arbel NPCM8XX SoC
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 2
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
+  nuvoton,sw-reset-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    description: |
+      Contains the software reset number to restart the SoC.
+      If not specified, software reset is disabled.
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+  - nuvoton,sysgcr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    rstc: rstc@f0801000 {
+        compatible = "nuvoton,npcm750-reset";
+        reg = <0xf0801000 0x70>;
+        #reset-cells = <2>;
+        nuvoton,sysgcr = <&gcr>;
+        nuvoton,sw-reset-number = <2>;
+    };
+
+    // Specifying reset lines connected to IP NPCM7XX modules
+    spi0: spi {
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
new file mode 100644
index 0000000000..05d5be48da
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
@@ -0,0 +1,83 @@
+NXP LPC1850  Reset Generation Unit (RGU)
+========================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-rgu"
+- reg: register base and length
+- clocks: phandle and clock specifier to RGU clocks
+- clock-names: should contain "delay" and "reg"
+- #reset-cells: should be 1
+
+See table below for valid peripheral reset numbers. Numbers not
+in the table below are either reserved or not applicable for
+normal operation.
+
+Reset	Peripheral
+  9	System control unit (SCU)
+ 12	ARM Cortex-M0 subsystem core (LPC43xx only)
+ 13	CPU core
+ 16	LCD controller
+ 17	USB0
+ 18	USB1
+ 19	DMA
+ 20	SDIO
+ 21	External memory controller (EMC)
+ 22	Ethernet
+ 25	Flash bank A
+ 27	EEPROM
+ 28	GPIO
+ 29	Flash bank B
+ 32	Timer0
+ 33	Timer1
+ 34	Timer2
+ 35	Timer3
+ 36	Repetitive Interrupt timer (RIT)
+ 37	State Configurable Timer (SCT)
+ 38	Motor control PWM (MCPWM)
+ 39	QEI
+ 40	ADC0
+ 41	ADC1
+ 42	DAC
+ 44	USART0
+ 45	UART1
+ 46	USART2
+ 47	USART3
+ 48	I2C0
+ 49	I2C1
+ 50	SSP0
+ 51	SSP1
+ 52	I2S0 and I2S1
+ 53	Serial Flash Interface (SPIFI)
+ 54	C_CAN1
+ 55	C_CAN0
+ 56	ARM Cortex-M0 application core (LPC4370 only)
+ 57	SGPIO (LPC43xx only)
+ 58	SPI (LPC43xx only)
+ 60	ADCHS (12-bit ADC) (LPC4370 only)
+
+Refer to NXP LPC18xx or LPC43xx user manual for more details about
+the reset signals and the connected block/peripheral.
+
+Reset provider example:
+rgu: reset-controller@40053000 {
+	compatible = "nxp,lpc1850-rgu";
+	reg = <0x40053000 0x1000>;
+	clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+	clock-names = "delay", "reg";
+	#reset-cells = <1>;
+};
+
+Reset consumer example:
+mac: ethernet@40010000 {
+	compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+	reg = <0x40010000 0x2000>;
+	interrupts = <5>;
+	interrupt-names = "macirq";
+	clocks = <&ccu1 CLK_CPU_ETHERNET>;
+	clock-names = "stmmaceth";
+	resets = <&rgu 22>;
+	reset-names = "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
new file mode 100644
index 0000000000..47f8525a9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Alban Bedel <albeu@free.fr>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qca,ar9132-reset
+          - qca,ar9331-reset
+      - const: qca,ar7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@1806001c {
+          compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+          reg = <0x1806001c 0x4>;
+          #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
new file mode 100644
index 0000000000..d92e2b3cc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,aoss-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm AOSS Reset Controller
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  The bindings describe the reset-controller found on AOSS-CC (always on
+  subsystem) for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7180-aoss-cc"
+          - const: "qcom,sdm845-aoss-cc"
+
+      - description: on SC7280 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7280-aoss-cc"
+          - const: "qcom,sdm845-aoss-cc"
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sdm845-aoss-cc"
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    aoss_reset: reset-controller@c2a0000 {
+      compatible = "qcom,sdm845-aoss-cc";
+      reg = <0xc2a0000 0x31000>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
new file mode 100644
index 0000000000..ca5d793321
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/qcom,pdc-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PDC Global
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  The bindings describes the reset-controller found on PDC-Global (Power Domain
+  Controller) block for Qualcomm Technologies Inc SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - description: on SC7180 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7180-pdc-global"
+          - const: "qcom,sdm845-pdc-global"
+
+      - description: on SC7280 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sc7280-pdc-global"
+
+      - description: on SDM845 SoCs the following compatibles must be specified
+        items:
+          - const: "qcom,sdm845-pdc-global"
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pdc_reset: reset-controller@b2e0000 {
+      compatible = "qcom,sdm845-pdc-global";
+      reg = <0xb2e0000 0x20000>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
new file mode 100644
index 0000000000..e7e4872477
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G Reset Controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+  The R-Car and RZ/G Reset Controllers provide reset control, and implement the
+  following functions:
+    - Latching of the levels on mode pins when PRESET# is negated,
+    - Mode monitoring register,
+    - Reset control of peripheral devices (on R-Car Gen1),
+    - Watchdog timer (on R-Car Gen1),
+    - Register-based reset control and boot address registers for the various
+      CPU cores (on R-Car Gen2 and Gen3, and on RZ/G).
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7742-rst       # RZ/G1H
+      - renesas,r8a7743-rst       # RZ/G1M
+      - renesas,r8a7744-rst       # RZ/G1N
+      - renesas,r8a7745-rst       # RZ/G1E
+      - renesas,r8a77470-rst      # RZ/G1C
+      - renesas,r8a774a1-rst      # RZ/G2M
+      - renesas,r8a774b1-rst      # RZ/G2N
+      - renesas,r8a774c0-rst      # RZ/G2E
+      - renesas,r8a774e1-rst      # RZ/G2H
+      - renesas,r8a7778-reset-wdt # R-Car M1A
+      - renesas,r8a7779-reset-wdt # R-Car H1
+      - renesas,r8a7790-rst       # R-Car H2
+      - renesas,r8a7791-rst       # R-Car M2-W
+      - renesas,r8a7792-rst       # R-Car V2H
+      - renesas,r8a7793-rst       # R-Car M2-N
+      - renesas,r8a7794-rst       # R-Car E2
+      - renesas,r8a7795-rst       # R-Car H3
+      - renesas,r8a7796-rst       # R-Car M3-W
+      - renesas,r8a77961-rst      # R-Car M3-W+
+      - renesas,r8a77965-rst      # R-Car M3-N
+      - renesas,r8a77970-rst      # R-Car V3M
+      - renesas,r8a77980-rst      # R-Car V3H
+      - renesas,r8a77990-rst      # R-Car E3
+      - renesas,r8a77995-rst      # R-Car D3
+      - renesas,r8a779a0-rst      # R-Car V3U
+      - renesas,r8a779f0-rst      # R-Car S4-8
+      - renesas,r8a779g0-rst      # R-Car V4H
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@e6160000 {
+            compatible = "renesas,r8a7795-rst";
+            reg = <0xe6160000 0x0200>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
new file mode 100644
index 0000000000..731b8ce015
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} USBPHY Control
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description:
+  The RZ/G2L USBPHY Control mainly controls reset and power down of the
+  USB/PHY.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
+          - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
+          - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
+      - const: renesas,rzg2l-usbphy-ctrl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+    description: |
+      The phandle's argument in the reset specifier is the PHY reset associated
+      with the USB port.
+      0 = Port 1 Phy reset
+      1 = Port 2 Phy reset
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    phyrst: usbphy-ctrl@11c40000 {
+        compatible = "renesas,r9a07g044-usbphy-ctrl",
+                     "renesas,rzg2l-usbphy-ctrl";
+        reg = <0x11c40000 0x10000>;
+        clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+        resets = <&cpg R9A07G044_USB_PRESETN>;
+        power-domains = <&cpg>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/reset.txt b/Documentation/devicetree/bindings/reset/reset.txt
new file mode 100644
index 0000000000..31db6ff849
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/reset.txt
@@ -0,0 +1,75 @@
+= Reset Signal Device Tree Bindings =
+
+This binding is intended to represent the hardware reset signals present
+internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
+standalone chips are most likely better represented as GPIOs, although there
+are likely to be exceptions to this rule.
+
+Hardware blocks typically receive a reset signal. This signal is generated by
+a reset provider (e.g. power management or clock module) and received by a
+reset consumer (the module being reset, or a module managing when a sub-
+ordinate module is reset). This binding exists to represent the provider and
+consumer, and provide a way to couple the two together.
+
+A reset signal is represented by the phandle of the provider, plus a reset
+specifier - a list of DT cells that represents the reset signal within the
+provider. The length (number of cells) and semantics of the reset specifier
+are dictated by the binding of the reset provider, although common schemes
+are described below.
+
+A word on where to place reset signal consumers in device tree: It is possible
+in hardware for a reset signal to affect multiple logically separate HW blocks
+at once. In this case, it would be unwise to represent this reset signal in
+the DT node of each affected HW block, since if activated, an unrelated block
+may be reset. Instead, reset signals should be represented in the DT node
+where it makes most sense to control it; this may be a bus node if all
+children of the bus are affected by the reset signal, or an individual HW
+block node for dedicated reset signals. The intent of this binding is to give
+appropriate software access to the reset signals in order to manage the HW,
+rather than to slavishly enumerate the reset signal that affects each HW
+block.
+
+= Reset providers =
+
+Required properties:
+#reset-cells:	Number of cells in a reset specifier; Typically 0 for nodes
+		with a single reset output and 1 for nodes with multiple
+		reset outputs.
+
+For example:
+
+	rst: reset-controller {
+		#reset-cells = <1>;
+	};
+
+= Reset consumers =
+
+Required properties:
+resets:		List of phandle and reset specifier pairs, one pair
+		for each reset signal that affects the device, or that the
+		device manages. Note: if the reset provider specifies '0' for
+		#reset-cells, then only the phandle portion of the pair will
+		appear.
+
+Optional properties:
+reset-names:	List of reset signal name strings sorted in the same order as
+		the resets property. Consumers drivers will use reset-names to
+		match reset signal names with reset specifiers.
+
+For example:
+
+	device {
+		resets = <&rst 20>;
+		reset-names = "reset";
+	};
+
+This represents a device with a single reset signal named "reset".
+
+	bus {
+		resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
+		reset-names = "i2s1", "i2s2", "dma", "mixer";
+	};
+
+This represents a bus that controls the reset signal of each of four sub-
+ordinate devices. Consider for example a bus that fails to operate unless no
+child device has reset asserted.
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
new file mode 100644
index 0000000000..a75db3d405
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXS10x reset controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description: |
+  This binding describes the ARC AXS10x boards custom IP-block which allows
+  to control reset signals of selected peripherals. For example DW GMAC, etc...
+  This block is controlled via memory-mapped register (AKA CREG) which
+  represents up-to 32 reset lines.
+  As of today only the following lines are used:
+   - DW GMAC - line 5
+
+properties:
+  compatible:
+    const: snps,axs10x-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11220 {
+        compatible = "snps,axs10x-reset";
+        #reset-cells = <1>;
+        reg = <0x11220 0x4>;
+    };
+
+    // Specifying reset lines connected to IP modules:
+    ethernet {
+        resets = <&reset 5>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
new file mode 100644
index 0000000000..0c241d4aae
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -0,0 +1,30 @@
+Synopsys DesignWare Reset controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+
+- compatible: should be one of the following.
+	"snps,dw-high-reset" - for active high configuration
+	"snps,dw-low-reset" - for active low configuration
+
+- reg: physical base address of the controller and length of memory mapped
+	region.
+
+- #reset-cells: must be 1.
+
+example:
+
+	dw_rst_1: reset-controller@0000 {
+		compatible = "snps,dw-high-reset";
+		reg = <0x0000 0x4>;
+		#reset-cells = <1>;
+	};
+
+	dw_rst_2: reset-controller@1000 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x1000 0x8>;
+		#reset-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
new file mode 100644
index 0000000000..830069b1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
@@ -0,0 +1,28 @@
+Binding for the Synopsys HSDK reset controller
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-reset".
+- reg: should always contain 2 pairs address - length: first for reset
+  configuration register and second for corresponding SW reset and status bits
+  register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset@880 {
+		compatible = "snps,hsdk-reset";
+		#reset-cells = <1>;
+		reg = <0x8A0 0x4>, <0xFF0 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset HSDK_V1_ETH_RESET>;
+		....
+	};
+
+The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
new file mode 100644
index 0000000000..fa253c518d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-glue-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral core reset in glue layer
+
+description: |
+  Some peripheral core reset belongs to its own glue layer. Before using
+  this core reset, it is necessary to control the clocks and resets to
+  enable this layer. These clocks and resets should be described in each
+  property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-reset
+      - socionext,uniphier-pro5-usb3-reset
+      - socionext,uniphier-pxs2-usb3-reset
+      - socionext,uniphier-ld20-usb3-reset
+      - socionext,uniphier-pxs3-usb3-reset
+      - socionext,uniphier-nx1-usb3-reset
+      - socionext,uniphier-pro4-ahci-reset
+      - socionext,uniphier-pxs2-ahci-reset
+      - socionext,uniphier-pxs3-ahci-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-reset
+              - socionext,uniphier-pro5-usb3-reset
+              - socionext,uniphier-pro4-ahci-reset
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb_rst: reset-controller@0 {
+        compatible = "socionext,uniphier-ld20-usb3-reset";
+        reg = <0x0 0x4>;
+        #reset-cells = <1>;
+        clock-names = "link";
+        clocks = <&sys_clk 14>;
+        reset-names = "link";
+        resets = <&sys_rst 14>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
new file mode 100644
index 0000000000..033b252a3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/socionext,uniphier-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier reset controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: System reset
+        enum:
+          - socionext,uniphier-ld4-reset
+          - socionext,uniphier-pro4-reset
+          - socionext,uniphier-sld8-reset
+          - socionext,uniphier-pro5-reset
+          - socionext,uniphier-pxs2-reset
+          - socionext,uniphier-ld6b-reset
+          - socionext,uniphier-ld11-reset
+          - socionext,uniphier-ld20-reset
+          - socionext,uniphier-pxs3-reset
+          - socionext,uniphier-nx1-reset
+      - description: Media I/O (MIO) reset, SD reset
+        enum:
+          - socionext,uniphier-ld4-mio-reset
+          - socionext,uniphier-pro4-mio-reset
+          - socionext,uniphier-sld8-mio-reset
+          - socionext,uniphier-pro5-sd-reset
+          - socionext,uniphier-pxs2-sd-reset
+          - socionext,uniphier-ld11-mio-reset
+          - socionext,uniphier-ld11-sd-reset
+          - socionext,uniphier-ld20-sd-reset
+          - socionext,uniphier-pxs3-sd-reset
+          - socionext,uniphier-nx1-sd-reset
+      - description: Peripheral reset
+        enum:
+          - socionext,uniphier-ld4-peri-reset
+          - socionext,uniphier-pro4-peri-reset
+          - socionext,uniphier-sld8-peri-reset
+          - socionext,uniphier-pro5-peri-reset
+          - socionext,uniphier-pxs2-peri-reset
+          - socionext,uniphier-ld11-peri-reset
+          - socionext,uniphier-ld20-peri-reset
+          - socionext,uniphier-pxs3-peri-reset
+          - socionext,uniphier-nx1-peri-reset
+      - description: Analog signal amplifier reset
+        enum:
+          - socionext,uniphier-ld11-adamv-reset
+          - socionext,uniphier-ld20-adamv-reset
+
+  "#reset-cells":
+    const: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#reset-cells"
+
+examples:
+  - |
+    reset-controller {
+        compatible = "socionext,uniphier-ld11-reset";
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
new file mode 100644
index 0000000000..3661e6153a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -0,0 +1,44 @@
+STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"softreset" control bits found in the STi family SoC system configuration
+registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stih407-softreset";
+- #reset-cells: 1, see below
+
+example:
+
+	softreset: softreset-controller {
+		#reset-cells = <1>;
+		compatible = "st,stih407-softreset";
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the softreset device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+	ethernet0{
+		resets			= <&softreset STIH415_ETH0_SOFTRESET>;
+	};
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
new file mode 100644
index 0000000000..329ae4ae1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+  the STi family SoC system configuration registers.
+
+  The actual action taken when softreset is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-picophyreset
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    picophyreset: picophyreset-controller {
+        compatible = "st,stih407-picophyreset";
+        #reset-cells = <1>;
+    };
+
+    // Specifying picophyreset control of devices
+    usb2_picophy0: usbpicophy {
+        resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
new file mode 100644
index 0000000000..d3790e6026
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@st.com>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip peripheral controllers such as USB and SATA, using
+  "powerdown" control bits found in the STi family SoC system configuration
+  registers. These have been grouped together into a single reset controller
+  device for convenience.
+
+  The actual action taken when powerdown is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-powerdown
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    powerdown: powerdown-controller {
+        compatible = "st,stih407-powerdown";
+        #reset-cells = <1>;
+    };
+
+    // Specifying powerdown control of devices:
+    st_dwc3: dwc3 {
+        resets = <&powerdown STIH407_USB3_POWERDOWN>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
new file mode 100644
index 0000000000..01db343751
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
@@ -0,0 +1,6 @@
+STMicroelectronics STM32 Peripheral Reset Controller
+====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32-rcc.txt
diff --git a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt
new file mode 100644
index 0000000000..2880d5dda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt
@@ -0,0 +1,6 @@
+STMicroelectronics STM32MP1 Peripheral Reset Controller
+=======================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
diff --git a/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
new file mode 100644
index 0000000000..2f5bd616b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/starfive,jh7100-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 SoC Reset Controller
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@11840000 {
+        compatible = "starfive,jh7100-reset";
+        reg = <0x11840000 0x10000>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
new file mode 100644
index 0000000000..205918ce32
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sunplus,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstc: reset@9c000054 {
+      compatible = "sunplus,sp7021-reset";
+      reg = <0x9c000054 0x28>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
new file mode 100644
index 0000000000..e10eb98edd
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,sci-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI reset controller
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This reset controller node uses the TI SCI protocol to perform the reset
+  management of various hardware modules present on the SoC. Must be a child
+  node of the associated TI-SCI system controller node.
+
+properties:
+  $nodename:
+    pattern: "^reset-controller$"
+
+  compatible:
+    const: ti,sci-reset
+
+  "#reset-cells":
+    const: 2
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell should contain the reset mask corresponding to the device
+      used by system controller.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+
+additionalProperties: false
+
+examples:
+  - |
+    k3_reset: reset-controller {
+        compatible = "ti,sci-reset";
+        #reset-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
new file mode 100644
index 0000000000..6063784f03
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
new file mode 100644
index 0000000000..61a0ff33e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
@@ -0,0 +1,91 @@
+TI SysCon Reset Controller
+=======================
+
+Almost all SoCs have hardware modules that require reset control in addition
+to clock and power control for their functionality. The reset control is
+typically provided by means of memory-mapped I/O registers. These registers are
+sometimes a part of a larger register space region implementing various
+functionalities. This register range is best represented as a syscon node to
+allow multiple entities to access their relevant registers in the common
+register space.
+
+A SysCon Reset Controller node defines a device that uses a syscon node
+and provides reset management functionality for various hardware modules
+present on the SoC.
+
+SysCon Reset Controller Node
+============================
+Each of the reset provider/controller nodes should be a child of a syscon
+node and have the following properties.
+
+Required properties:
+--------------------
+ - compatible		: Should be,
+			    "ti,k2e-pscrst"
+			    "ti,k2l-pscrst"
+			    "ti,k2hk-pscrst"
+			    "ti,syscon-reset"
+ - #reset-cells		: Should be 1. Please see the reset consumer node below
+			  for usage details
+ - ti,reset-bits	: Contains the reset control register information
+			  Should contain 7 cells for each reset exposed to
+			  consumers, defined as:
+			    Cell #1 : offset of the reset assert control
+			              register from the syscon register base
+			    Cell #2 : bit position of the reset in the reset
+			              assert control register
+			    Cell #3 : offset of the reset deassert control
+			              register from the syscon register base
+			    Cell #4 : bit position of the reset in the reset
+			              deassert control register
+			    Cell #5 : offset of the reset status register
+			              from the syscon register base
+			    Cell #6 : bit position of the reset in the
+			              reset status register
+			    Cell #7 : Flags used to control reset behavior,
+			              available flags defined in the DT include
+			              file <dt-bindings/reset/ti-syscon.h>
+
+SysCon Reset Consumer Nodes
+===========================
+Each of the reset consumer nodes should have the following properties,
+in addition to their own properties.
+
+Required properties:
+--------------------
+ - resets	: A phandle to the reset controller node and an index number
+		  to a reset specifier as defined above.
+
+Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
+common reset controller usage by consumers.
+
+Example:
+--------
+The following example demonstrates a syscon node, the reset controller node
+using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
+66AK2E SoC.
+
+/ {
+	soc {
+		psc: power-sleep-controller@2350000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x02350000 0x1000>;
+
+			pscrst: reset-controller {
+				compatible = "ti,k2e-pscrst", "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET   | STATUS_CLEAR) /* 0: dsp0 */
+					0xa40 5 0xa44 3 0     0 (ASSERT_SET   | DEASSERT_CLEAR | STATUS_NONE)  /* 1: example */
+				>;
+			};
+		};
+
+		dsp0: dsp0 {
+			...
+			resets = <&pscrst 0>;
+			...
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
new file mode 100644
index 0000000000..49db668014
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/xlnx,zynqmp-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC and Versal reset
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+
+description: |
+  The Zynq UltraScale+ MPSoC and Versal has several different resets.
+
+  The PS reset subsystem is responsible for handling the external reset
+  input to the device and that all internal reset requirements are met
+  for the system (as a whole) and for the functional units.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage. Device nodes that need access to reset
+  lines should specify them as a reset phandle in their corresponding
+  node as specified in reset.txt.
+
+  For list of all valid reset indices for Zynq UltraScale+ MPSoC
+  <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+  For list of all valid reset indices for Versal
+  <dt-bindings/reset/xlnx-versal-resets.h>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-reset
+      - xlnx,versal-reset
+      - xlnx,versal-net-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp_reset: reset-controller {
+        compatible = "xlnx,zynqmp-reset";
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/zynq-reset.txt b/Documentation/devicetree/bindings/reset/zynq-reset.txt
new file mode 100644
index 0000000000..5860120e30
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/zynq-reset.txt
@@ -0,0 +1,68 @@
+Xilinx Zynq Reset Manager
+
+The Zynq AP-SoC has several different resets.
+
+See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets.
+
+Required properties:
+- compatible: "xlnx,zynq-reset"
+- reg: SLCR offset and size taken via syscon <0x200 0x48>
+- syscon: <&slcr>
+  This should be a phandle to the Zynq's SLCR registers.
+- #reset-cells: Must be 1
+
+The Zynq Reset Manager needs to be a childnode of the SLCR.
+
+Example:
+	rstc: rstc@200 {
+		compatible = "xlnx,zynq-reset";
+		reg = <0x200 0x48>;
+		#reset-cells = <1>;
+		syscon = <&slcr>;
+	};
+
+Reset outputs:
+ 0  : soft reset
+ 32 : ddr reset
+ 64 : topsw reset
+ 96 : dmac reset
+ 128: usb0 reset
+ 129: usb1 reset
+ 160: gem0 reset
+ 161: gem1 reset
+ 164: gem0 rx reset
+ 165: gem1 rx reset
+ 166: gem0 ref reset
+ 167: gem1 ref reset
+ 192: sdio0 reset
+ 193: sdio1 reset
+ 196: sdio0 ref reset
+ 197: sdio1 ref reset
+ 224: spi0 reset
+ 225: spi1 reset
+ 226: spi0 ref reset
+ 227: spi1 ref reset
+ 256: can0 reset
+ 257: can1 reset
+ 258: can0 ref reset
+ 259: can1 ref reset
+ 288: i2c0 reset
+ 289: i2c1 reset
+ 320: uart0 reset
+ 321: uart1 reset
+ 322: uart0 ref reset
+ 323: uart1 ref reset
+ 352: gpio reset
+ 384: lqspi reset
+ 385: qspi ref reset
+ 416: smc reset
+ 417: smc ref reset
+ 448: ocm reset
+ 512: fpga0 out reset
+ 513: fpga1 out reset
+ 514: fpga2 out reset
+ 515: fpga3 out reset
+ 544: a9 reset 0
+ 545: a9 reset 1
+ 552: peri reset
+
diff --git a/Documentation/devicetree/bindings/resource-names.txt b/Documentation/devicetree/bindings/resource-names.txt
new file mode 100644
index 0000000000..e280fef6f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/resource-names.txt
@@ -0,0 +1,54 @@
+Some properties contain an ordered list of 1 or more datum which are
+normally accessed by index.  However, some devices will have multiple
+values which are more naturally accessed by name.  Device nodes can
+include a supplemental property for assigning names to each of the list
+items.  The names property consists of a list of strings in the same
+order as the data in the resource property.
+
+The following supplemental names properties are defined.
+
+Resource Property	Supplemental Names Property
+-----------------	---------------------------
+reg			reg-names
+clocks			clock-names
+interrupts		interrupt-names
+
+Usage:
+
+The -names property must be used in conjunction with the normal resource
+property. If not it will be ignored.
+
+Examples:
+
+l4-abe {
+	compatible = "simple-bus";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x48000000 0x00001000>, /* MPU path */
+		 <1 0 0x49000000 0x00001000>; /* L3 path */
+	mcasp {
+		compatible = "ti,mcasp";
+		reg = <0 0x10 0x10>, <0 0x20 0x10>,
+		      <1 0x10 0x10>, <1 0x20 0x10>;
+		reg-names = "mpu", "dat",
+			    "dma", "dma_dat";
+		interrupts = <11>, <12>;
+		interrupt-names = "rx", "tx";
+	};
+
+	timer {
+		compatible = "ti,timer";
+		reg = <0 0x40 0x10>, <1 0x40 0x10>;
+		reg-names = "mpu", "dma";
+	};
+};
+
+
+usb {
+	compatible = "ti,usb-host";
+	reg = <0x4a064000 0x800>, <0x4a064800 0x200>,
+	      <0x4a064c00 0x200>;
+	reg-names = "config", "ohci", "ehci";
+	interrupts = <14>, <15>;
+	interrupt-names = "ohci", "ehci";
+};
diff --git a/Documentation/devicetree/bindings/riscv/canaan.yaml b/Documentation/devicetree/bindings/riscv/canaan.yaml
new file mode 100644
index 0000000000..41fd11f70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/canaan.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/canaan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan SoC-based boards
+
+maintainers:
+  - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+  Canaan Kendryte K210 SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: sipeed,maix-bit
+          - const: sipeed,maix-bitm
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-go
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-dock-m1
+          - const: sipeed,maix-dock-m1w
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maixduino
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-kd233
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-k210
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
new file mode 100644
index 0000000000..97e8441eda
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V CPUs
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+  - Conor Dooley <conor@kernel.org>
+
+description: |
+  This document uses some terminology common to the RISC-V community
+  that is not widely used, the definitions of which are listed here:
+
+  hart: A hardware execution context, which contains all the state
+  mandated by the RISC-V ISA: a PC and some registers.  This
+  terminology is designed to disambiguate software's view of execution
+  contexts from any particular microarchitectural implementation
+  strategy.  For example, an Intel laptop containing one socket with
+  two cores, each of which has two hyperthreads, could be described as
+  having four harts.
+
+allOf:
+  - $ref: /schemas/cpu.yaml#
+  - $ref: extensions.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - andestech,ax45mp
+              - canaan,k210
+              - sifive,bullet0
+              - sifive,e5
+              - sifive,e7
+              - sifive,e71
+              - sifive,rocket0
+              - sifive,s7
+              - sifive,u5
+              - sifive,u54
+              - sifive,u7
+              - sifive,u74
+              - sifive,u74-mc
+              - thead,c906
+              - thead,c910
+          - const: riscv
+      - items:
+          - enum:
+              - sifive,e51
+              - sifive,u54-mc
+          - const: sifive,rocket0
+          - const: riscv
+      - const: riscv    # Simulator only
+    description:
+      Identifies that the hart uses the RISC-V instruction set
+      and identifies the type of the hart.
+
+  mmu-type:
+    description:
+      Identifies the MMU address translation mode used on this
+      hart.  These values originate from the RISC-V Privileged
+      Specification document, available from
+      https://riscv.org/specifications/
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - riscv,sv32
+      - riscv,sv39
+      - riscv,sv48
+      - riscv,sv57
+      - riscv,none
+
+  riscv,cbom-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbom cache operations.
+
+  riscv,cboz-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicboz cache operations.
+
+  # RISC-V has multiple properties for cache op block sizes as the sizes
+  # differ between individual CBO extensions
+  cache-op-block-size: false
+  # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
+  timebase-frequency: false
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+    description: Describes the CPU's local interrupt controller
+
+    properties:
+      '#interrupt-cells':
+        const: 1
+
+      compatible:
+        const: riscv,cpu-intc
+
+      interrupt-controller: true
+
+    required:
+      - '#interrupt-cells'
+      - compatible
+      - interrupt-controller
+
+  cpu-idle-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description: |
+      List of phandles to idle state nodes supported
+      by this hart (see ./idle-states.yaml).
+
+  capacity-dmips-mhz:
+    description:
+      u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
+      DMIPS/MHz, relative to highest capacity-dmips-mhz
+      in the system.
+
+anyOf:
+  - required:
+      - riscv,isa
+  - required:
+      - riscv,isa-base
+
+dependencies:
+  riscv,isa-base: [ "riscv,isa-extensions" ]
+  riscv,isa-extensions: [ "riscv,isa-base" ]
+
+required:
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1: SiFive Freedom U540G Development Kit
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        timebase-frequency = <1000000>;
+        cpu@0 {
+                clock-frequency = <0>;
+                compatible = "sifive,rocket0", "riscv";
+                device_type = "cpu";
+                i-cache-block-size = <64>;
+                i-cache-sets = <128>;
+                i-cache-size = <16384>;
+                reg = <0>;
+                riscv,isa-base = "rv64i";
+                riscv,isa-extensions = "i", "m", "a", "c";
+
+                cpu_intc0: interrupt-controller {
+                        #interrupt-cells = <1>;
+                        compatible = "riscv,cpu-intc";
+                        interrupt-controller;
+                };
+        };
+        cpu@1 {
+                clock-frequency = <0>;
+                compatible = "sifive,rocket0", "riscv";
+                d-cache-block-size = <64>;
+                d-cache-sets = <64>;
+                d-cache-size = <32768>;
+                d-tlb-sets = <1>;
+                d-tlb-size = <32>;
+                device_type = "cpu";
+                i-cache-block-size = <64>;
+                i-cache-sets = <64>;
+                i-cache-size = <32768>;
+                i-tlb-sets = <1>;
+                i-tlb-size = <32>;
+                mmu-type = "riscv,sv39";
+                reg = <1>;
+                tlb-split;
+                riscv,isa-base = "rv64i";
+                riscv,isa-extensions = "i", "m", "a", "f", "d", "c";
+
+                cpu_intc1: interrupt-controller {
+                        #interrupt-cells = <1>;
+                        compatible = "riscv,cpu-intc";
+                        interrupt-controller;
+                };
+        };
+    };
+
+  - |
+    // Example 2: Spike ISA Simulator with 1 Hart
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cpu@0 {
+                device_type = "cpu";
+                reg = <0>;
+                compatible = "riscv";
+                mmu-type = "riscv,sv48";
+                riscv,isa-base = "rv64i";
+                riscv,isa-extensions = "i", "m", "a", "f", "d", "c";
+
+                interrupt-controller {
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                        compatible = "riscv,cpu-intc";
+                };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml
new file mode 100644
index 0000000000..cc1f546fdb
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/extensions.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/extensions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V ISA extensions
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+  - Conor Dooley <conor@kernel.org>
+
+description: |
+  RISC-V has a large number of extensions, some of which are "standard"
+  extensions, meaning they are ratified by RISC-V International, and others
+  are "vendor" extensions.
+  This document defines properties that indicate whether a hart supports a
+  given extension.
+
+  Once a standard extension has been ratified, no changes in behaviour can be
+  made without the creation of a new extension.
+  The properties for standard extensions therefore map to their originally
+  ratified states, with the exception of the I, Zicntr & Zihpm extensions.
+  See the "i" property for more information.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: riscv
+
+properties:
+  riscv,isa:
+    description:
+      Identifies the specific RISC-V instruction set architecture
+      supported by the hart.  These are documented in the RISC-V
+      User-Level ISA document, available from
+      https://riscv.org/specifications/
+
+      Due to revisions of the ISA specification, some deviations
+      have arisen over time.
+      Notably, riscv,isa was defined prior to the creation of the
+      Zicntr, Zicsr, Zifencei and Zihpm extensions and thus "i"
+      implies "zicntr_zicsr_zifencei_zihpm".
+
+      While the isa strings in ISA specification are case
+      insensitive, letters in the riscv,isa string must be all
+      lowercase.
+    $ref: /schemas/types.yaml#/definitions/string
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
+    deprecated: true
+
+  riscv,isa-base:
+    description:
+      The base ISA implemented by this hart, as described by the 20191213
+      version of the unprivileged ISA specification.
+    enum:
+      - rv32i
+      - rv64i
+
+  riscv,isa-extensions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    minItems: 1
+    description: Extensions supported by the hart.
+    items:
+      anyOf:
+        # single letter extensions, in canonical order
+        - const: i
+          description: |
+            The base integer instruction set, as ratified in the 20191213
+            version of the unprivileged ISA specification.
+
+            This does not include Chapter 10, "Counters", which was moved into
+            the Zicntr and Zihpm extensions after the ratification of the
+            20191213 version of the unprivileged specification.
+
+        - const: m
+          description:
+            The standard M extension for integer multiplication and division, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: a
+          description:
+            The standard A extension for atomic instructions, as ratified in the
+            20191213 version of the unprivileged ISA specification.
+
+        - const: f
+          description:
+            The standard F extension for single-precision floating point, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: d
+          description:
+            The standard D extension for double-precision floating-point, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: q
+          description:
+            The standard Q extension for quad-precision floating-point, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: c
+          description:
+            The standard C extension for compressed instructions, as ratified in
+            the 20191213 version of the unprivileged ISA specification.
+
+        - const: v
+          description:
+            The standard V extension for vector operations, as ratified
+            in-and-around commit 7a6c8ae ("Fix text that describes vfmv.v.f
+            encoding") of the riscv-v-spec.
+
+        - const: h
+          description:
+            The standard H extension for hypervisors as ratified in the 20191213
+            version of the privileged ISA specification.
+
+        # multi-letter extensions, sorted alphanumerically
+        - const: smaia
+          description: |
+            The standard Smaia supervisor-level extension for the advanced
+            interrupt architecture for machine-mode-visible csr and behavioural
+            changes to interrupts as frozen at commit ccbddab ("Merge pull
+            request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
+
+        - const: ssaia
+          description: |
+            The standard Ssaia supervisor-level extension for the advanced
+            interrupt architecture for supervisor-mode-visible csr and
+            behavioural changes to interrupts as frozen at commit ccbddab
+            ("Merge pull request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
+
+        - const: sscofpmf
+          description: |
+            The standard Sscofpmf supervisor-level extension for count overflow
+            and mode-based filtering as ratified at commit 01d1df0 ("Add ability
+            to manually trigger workflow. (#2)") of riscv-count-overflow.
+
+        - const: sstc
+          description: |
+            The standard Sstc supervisor-level extension for time compare as
+            ratified at commit 3f9ed34 ("Add ability to manually trigger
+            workflow. (#2)") of riscv-time-compare.
+
+        - const: svinval
+          description:
+            The standard Svinval supervisor-level extension for fine-grained
+            address-translation cache invalidation as ratified in the 20191213
+            version of the privileged ISA specification.
+
+        - const: svnapot
+          description:
+            The standard Svnapot supervisor-level extensions for napot
+            translation contiguity as ratified in the 20191213 version of the
+            privileged ISA specification.
+
+        - const: svpbmt
+          description:
+            The standard Svpbmt supervisor-level extensions for page-based
+            memory types as ratified in the 20191213 version of the privileged
+            ISA specification.
+
+        - const: zba
+          description: |
+            The standard Zba bit-manipulation extension for address generation
+            acceleration instructions as ratified at commit 6d33919 ("Merge pull
+            request #158 from hirooih/clmul-fix-loop-end-condition") of
+            riscv-bitmanip.
+
+        - const: zbb
+          description: |
+            The standard Zbb bit-manipulation extension for basic bit-manipulation
+            as ratified at commit 6d33919 ("Merge pull request #158 from
+            hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+        - const: zbc
+          description: |
+            The standard Zbc bit-manipulation extension for carry-less
+            multiplication as ratified at commit 6d33919 ("Merge pull request
+            #158 from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+        - const: zbs
+          description: |
+            The standard Zbs bit-manipulation extension for single-bit
+            instructions as ratified at commit 6d33919 ("Merge pull request #158
+            from hirooih/clmul-fix-loop-end-condition") of riscv-bitmanip.
+
+        - const: zicbom
+          description:
+            The standard Zicbom extension for base cache management operations as
+            ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
+
+        - const: zicbop
+          description:
+            The standard Zicbop extension for cache-block prefetch instructions
+            as ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of
+            riscv-CMOs.
+
+        - const: zicboz
+          description:
+            The standard Zicboz extension for cache-block zeroing as ratified
+            in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs.
+
+        - const: zicntr
+          description:
+            The standard Zicntr extension for base counters and timers, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: zicsr
+          description: |
+            The standard Zicsr extension for control and status register
+            instructions, as ratified in the 20191213 version of the
+            unprivileged ISA specification.
+
+            This does not include Chapter 10, "Counters", which documents
+            special case read-only CSRs, that were moved into the Zicntr and
+            Zihpm extensions after the ratification of the 20191213 version of
+            the unprivileged specification.
+
+        - const: zifencei
+          description:
+            The standard Zifencei extension for instruction-fetch fence, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: zihintpause
+          description:
+            The standard Zihintpause extension for pause hints, as ratified in
+            commit d8ab5c7 ("Zihintpause is ratified") of the riscv-isa-manual.
+
+        - const: zihpm
+          description:
+            The standard Zihpm extension for hardware performance counters, as
+            ratified in the 20191213 version of the unprivileged ISA
+            specification.
+
+        - const: ztso
+          description:
+            The standard Ztso extension for total store ordering, as ratified
+            in commit 2e5236 ("Ztso is now ratified.") of the
+            riscv-isa-manual.
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml
new file mode 100644
index 0000000000..4a29c89061
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/microchip.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/microchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC-based boards
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description:
+  Microchip PolarFire SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - microchip,mpfs-icicle-reference-rtlv2203
+              - microchip,mpfs-icicle-reference-rtlv2210
+          - const: microchip,mpfs-icicle-kit
+          - const: microchip,mpfs
+
+      - items:
+          - enum:
+              - aldec,tysom-m-mpfs250t-rev2
+              - aries,m100pfsevp
+              - microchip,mpfs-sev-kit
+              - sundance,polarberry
+          - const: microchip,mpfs
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml
new file mode 100644
index 0000000000..ee0a239af4
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/sifive.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive SoC-based boards
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+
+description:
+  SiFive SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,hifive-unleashed-a00
+          - const: sifive,fu540-c000
+          - const: sifive,fu540
+
+      - items:
+          - enum:
+              - sifive,hifive-unmatched-a00
+          - const: sifive,fu740-c000
+          - const: sifive,fu740
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml
new file mode 100644
index 0000000000..cc4d92f0a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/starfive.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/starfive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive SoC-based boards
+
+maintainers:
+  - Michael Zhu <michael.zhu@starfivetech.com>
+  - Drew Fustini <drew@beagleboard.org>
+
+description:
+  StarFive SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - beagle,beaglev-starlight-jh7100-r0
+              - starfive,visionfive-v1
+          - const: starfive,jh7100
+
+      - items:
+          - enum:
+              - starfive,visionfive-2-v1.2a
+              - starfive,visionfive-2-v1.3b
+          - const: starfive,jh7110
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/sunxi.yaml b/Documentation/devicetree/bindings/riscv/sunxi.yaml
new file mode 100644
index 0000000000..b36e313e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/sunxi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/sunxi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner RISC-V SoC-based boards
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  Allwinner RISC-V SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Dongshan Nezha STU SoM
+        items:
+          - const: 100ask,dongshan-nezha-stu
+          - const: allwinner,sun20i-d1
+
+      - description: D1 Nezha board
+        items:
+          - const: allwinner,d1-nezha
+          - const: allwinner,sun20i-d1
+
+      - description: ClockworkPi R-01 SoM and v3.14 board
+        items:
+          - const: clockwork,r-01-clockworkpi-v3.14
+          - const: allwinner,sun20i-d1
+
+      - description: ClockworkPi R-01 SoM, v3.14 board, and DevTerm expansion
+        items:
+          - const: clockwork,r-01-devterm-v3.14
+          - const: clockwork,r-01-clockworkpi-v3.14
+          - const: allwinner,sun20i-d1
+
+      - description: Lichee RV SoM
+        items:
+          - const: sipeed,lichee-rv
+          - const: allwinner,sun20i-d1
+
+      - description: Carrier boards for the Lichee RV SoM
+        items:
+          - enum:
+              - sipeed,lichee-rv-86-panel-480p
+              - sipeed,lichee-rv-86-panel-720p
+              - sipeed,lichee-rv-dock
+          - const: sipeed,lichee-rv
+          - const: allwinner,sun20i-d1
+
+      - description: MangoPi MQ board
+        items:
+          - const: widora,mangopi-mq
+          - const: allwinner,sun20i-d1s
+
+      - description: MangoPi MQ Pro board
+        items:
+          - const: widora,mangopi-mq-pro
+          - const: allwinner,sun20i-d1
+
+      - description: MangoPi MQ-R board
+        items:
+          - const: widora,mangopi-mq-r-f133
+          - const: allwinner,sun20i-d1s
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/riscv/thead.yaml b/Documentation/devicetree/bindings/riscv/thead.yaml
new file mode 100644
index 0000000000..301912dcd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/riscv/thead.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/thead.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD SoC-based boards
+
+maintainers:
+  - Jisheng Zhang <jszhang@kernel.org>
+
+description:
+  T-HEAD SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BeagleV Ahead single board computer
+        items:
+          - const: beagle,beaglev-ahead
+          - const: thead,th1520
+      - description: Sipeed Lichee Pi 4A board for the Sipeed Lichee Module 4A
+        items:
+          - enum:
+              - sipeed,lichee-pi-4a
+          - const: sipeed,lichee-module-4a
+          - const: thead,th1520
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
new file mode 100644
index 0000000000..457a6e43d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/amlogic,meson-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Random number generator
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@c8834000 {
+          compatible = "amlogic,meson-rng";
+          reg = <0xc8834000 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml
new file mode 100644
index 0000000000..02be143cc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/apm,x-gene-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC Random Number Generator
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-rng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rng@10520000 {
+            compatible = "apm,xgene-rng";
+            reg = <0x0 0x10520000 0x0 0x100>;
+            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rngpkaclk 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rng/arm-cctrng.yaml b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
new file mode 100644
index 0000000000..c471e4c105
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/arm-cctrng.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/arm-cctrng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm TrustZone CryptoCell TRNG engine
+
+maintainers:
+  - Hadar Gat <hadar.gat@arm.com>
+
+description: |+
+  Arm TrustZone CryptoCell TRNG (True Random Number Generator) engine.
+
+properties:
+  compatible:
+    enum:
+      - arm,cryptocell-713-trng
+      - arm,cryptocell-703-trng
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  arm,rosc-ratio:
+    description:
+      Arm TrustZone CryptoCell TRNG engine has 4 ring oscillators.
+      Sampling ratio values for these 4 ring oscillators. (from calibration)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - arm,rosc-ratio
+
+additionalProperties: false
+
+examples:
+  - |
+    arm_cctrng: rng@60000000 {
+        compatible = "arm,cryptocell-713-trng";
+        interrupts = <0 29 4>;
+        reg = <0x60000000 0x10000>;
+        arm,rosc-ratio = <5000 1000 500 0>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
new file mode 100644
index 0000000000..3ce45456d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/atmel,at91-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 True Random Number Generator
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9g45-trng
+          - microchip,sam9x60-trng
+      - items:
+          - enum:
+              - microchip,sama7g5-trng
+          - const: atmel,at91sam9g45-trng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rng@fffcc000 {
+        compatible = "atmel,at91sam9g45-trng";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&trng_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
new file mode 100644
index 0000000000..6da674666d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/brcm,bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835/6368 Random number generator
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Herbert Xu <herbert@gondor.apana.org.au>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-rng
+      - brcm,bcm-nsp-rng
+      - brcm,bcm5301x-rng
+      - brcm,bcm6368-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipsec
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ipsec
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      enum:
+        - brcm,bcm6368-rng
+then:
+  required:
+    - clocks
+    - clock-names
+    - resets
+    - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@7e104000 {
+        compatible = "brcm,bcm2835-rng";
+        reg = <0x7e104000 0x10>;
+        interrupts = <2 29>;
+    };
+
+  - |
+    rng@18033000 {
+        compatible = "brcm,bcm-nsp-rng";
+        reg = <0x18033000 0x14>;
+    };
+
+  - |
+    rng@10004180 {
+        compatible = "brcm,bcm6368-rng";
+        reg = <0x10004180 0x14>;
+
+        clocks = <&periph_clk 18>;
+        clock-names = "ipsec";
+
+        resets = <&periph_rst 4>;
+        reset-names = "ipsec";
+    };
diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml
new file mode 100644
index 0000000000..827983008e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/brcm,iproc-rng200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HWRNG support for the iproc-rng200 driver
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-rng200
+      - brcm,bcm7211-rng200
+      - brcm,bcm7278-rng200
+      - brcm,iproc-rng200
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@18032000 {
+        compatible = "brcm,iproc-rng200";
+        reg = <0x18032000 0x28>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/hisi-rng.txt b/Documentation/devicetree/bindings/rng/hisi-rng.txt
new file mode 100644
index 0000000000..d04d55a6c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/hisi-rng.txt
@@ -0,0 +1,12 @@
+Hisilicon Random Number Generator
+
+Required properties:
+- compatible : Should be "hisilicon,hip04-rng" or "hisilicon,hip05-rng"
+- reg : Offset and length of the register set of this block
+
+Example:
+
+rng@d1010000 {
+	compatible = "hisilicon,hip05-rng";
+	reg = <0xd1010000 0x100>;
+};
diff --git a/Documentation/devicetree/bindings/rng/imx-rng.yaml b/Documentation/devicetree/bindings/rng/imx-rng.yaml
new file mode 100644
index 0000000000..07f6ff89bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/imx-rng.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/imx-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale RNGA/RNGB/RNGC (Random Number Generator Versions A, B and C)
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-rnga
+      - const: fsl,imx25-rngb
+      - items:
+          - const: fsl,imx31-rnga
+          - const: fsl,imx21-rnga
+      - items:
+          - enum:
+              - fsl,imx6sl-rngb
+              - fsl,imx6sll-rngb
+              - fsl,imx6ull-rngb
+          - const: fsl,imx25-rngb
+      - const: fsl,imx35-rngc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rngb@53fb0000 {
+        compatible = "fsl,imx25-rngb";
+        reg = <0x53fb0000 0x4000>;
+        clocks = <&clks 109>;
+        interrupts = <22>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/ingenic,rng.yaml b/Documentation/devicetree/bindings/rng/ingenic,rng.yaml
new file mode 100644
index 0000000000..79a023cbfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ingenic,rng.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ingenic,rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RNG in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The Random Number Generator in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,jz4780-rng
+      - ingenic,x1000-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng: rng@d8 {
+        compatible = "ingenic,jz4780-rng";
+        reg = <0xd8 0x8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rng/ingenic,trng.yaml b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
new file mode 100644
index 0000000000..acaeb63caf
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ingenic,trng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ingenic,trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DTRNG in Ingenic SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The True Random Number Generator in Ingenic SoCs.
+
+properties:
+  compatible:
+    enum:
+      - ingenic,x1830-dtrng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,x1830-cgu.h>
+
+    dtrng: trng@10072000 {
+        compatible = "ingenic,x1830-dtrng";
+        reg = <0x10072000 0xc>;
+
+        clocks = <&cgu X1830_CLK_DTRNG>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
new file mode 100644
index 0000000000..9f7590ce6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/intel,ixp46x-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP46x RNG
+
+description: |
+  The Intel IXP46x has a random number generator at a fixed physical
+  location in memory. Each read is guaranteed to provide a unique
+  32 bit random number.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: intel,ixp46x-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@70002100 {
+      compatible = "intel,ixp46x-rng";
+      reg = <0x70002100 4>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt
new file mode 100644
index 0000000000..c6d1003bef
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt
@@ -0,0 +1,17 @@
+* Microchip PIC32 Random Number Generator
+
+The PIC32 RNG provides a pseudo random number generator which can be seeded by
+another true random number generator.
+
+Required properties:
+- compatible : should be "microchip,pic32mzda-rng"
+- reg : Specifies base physical address and size of the registers.
+- clocks: clock phandle.
+
+Example:
+
+	rng: rng@1f8e6000 {
+		compatible = "microchip,pic32mzda-rng";
+		reg = <0x1f8e6000 0x1000>;
+		clocks = <&PBCLK5>;
+	};
diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.yaml b/Documentation/devicetree/bindings/rng/mtk-rng.yaml
new file mode 100644
index 0000000000..7e8dc62e5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/mtk-rng.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/mtk-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Random number generator
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  $nodename:
+    pattern: "^rng@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt7623-rng
+      - items:
+          - enum:
+              - mediatek,mt7622-rng
+              - mediatek,mt7629-rng
+              - mediatek,mt7986-rng
+              - mediatek,mt8365-rng
+              - mediatek,mt8516-rng
+          - const: mediatek,mt7623-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rng
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    rng: rng@1020f000 {
+            compatible = "mediatek,mt7623-rng";
+            reg = <0x1020f000 0x1000>;
+            clocks = <&infracfg CLK_INFRA_TRNG>;
+            clock-names = "rng";
+    };
diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml
new file mode 100644
index 0000000000..e8e4ab1e5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/nuvoton,npcm-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM SoC Random Number Generator
+
+maintainers:
+  - Avi Fishman <avifishman70@gmail.com>
+  - Tomer Maimon <tmaimon77@gmail.com>
+  - Tali Perry <tali.perry1@gmail.com>
+  - Patrick Venture <venture@google.com>
+  - Nancy Yuen <yuenn@google.com>
+  - Benjamin Fair <benjaminfair@google.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-rng
+      - nuvoton,npcm845-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f000b000 {
+        compatible = "nuvoton,npcm750-rng";
+        reg = <0xf000b000 0x8>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/omap_rng.yaml b/Documentation/devicetree/bindings/rng/omap_rng.yaml
new file mode 100644
index 0000000000..c0ac4f68ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/omap_rng.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/omap_rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP SoC and Inside-Secure HWRNG Module
+
+maintainers:
+  - Jayesh Choudhary <j-choudhary@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-rng
+      - ti,omap4-rng
+      - inside-secure,safexcel-eip76
+
+  ti,hwmods:
+    const: rng
+    deprecated: true
+    description: Name of the hwmod associated with the RNG module
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: EIP150 gateable clock
+      - description: Main gateable clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,omap4-rng
+              - inside-secure,safexcel-eip76
+
+    then:
+      required:
+        - interrupts
+
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    /* AM335x */
+    rng: rng@48310000 {
+            compatible = "ti,omap4-rng";
+            ti,hwmods = "rng";
+            reg = <0x48310000 0x2000>;
+            interrupts = <111>;
+    };
+  - |
+    /* SafeXcel IP-76 */
+    trng: rng@f2760000 {
+            compatible = "inside-secure,safexcel-eip76";
+            reg = <0xf2760000 0x7d>;
+            interrupts = <0 59 4>;
+            clocks = <&cpm_syscon0 1 25>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos4-rng.yaml b/Documentation/devicetree/bindings/rng/samsung,exynos4-rng.yaml
new file mode 100644
index 0000000000..3362cb1213
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/samsung,exynos4-rng.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/samsung,exynos4-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Pseudo Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4-rng                   # for Exynos4210 and Exynos4412
+      - samsung,exynos5250-prng               # for Exynos5250+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: secss
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    rng@10830400 {
+        compatible = "samsung,exynos4-rng";
+        reg = <0x10830400 0x200>;
+        clocks = <&clock CLK_SSS>;
+        clock-names = "secss";
+    };
diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
new file mode 100644
index 0000000000..765d9f9edd
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/samsung,exynos5250-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC True Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Łukasz Stelmach <l.stelmach@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5250-trng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: secss
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    rng@10830600 {
+        compatible = "samsung,exynos5250-trng";
+        reg = <0x10830600 0x100>;
+        clocks = <&clock CLK_SSS>;
+        clock-names = "secss";
+    };
diff --git a/Documentation/devicetree/bindings/rng/silex-insight,ba431-rng.yaml b/Documentation/devicetree/bindings/rng/silex-insight,ba431-rng.yaml
new file mode 100644
index 0000000000..4673d6160a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/silex-insight,ba431-rng.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/silex-insight,ba431-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silex Insight BA431 RNG
+
+description: |
+  The BA431 hardware random number generator is an IP that is FIPS-140-2/3
+  certified.
+
+maintainers:
+  - Olivier Sobrie <olivier.sobrie@silexinsight.com>
+
+properties:
+  compatible:
+    const: silex-insight,ba431-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@42800000 {
+      compatible = "silex-insight,ba431-rng";
+      reg = <0x42800000 0x1000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rng/sparc_sun_oracle_rng.txt b/Documentation/devicetree/bindings/rng/sparc_sun_oracle_rng.txt
new file mode 100644
index 0000000000..b0b211194c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/sparc_sun_oracle_rng.txt
@@ -0,0 +1,30 @@
+HWRNG support for the n2_rng driver
+
+Required properties:
+- reg		: base address to sample from
+- compatible	: should contain one of the following
+	RNG versions:
+	- 'SUNW,n2-rng' for Niagara 2 Platform (SUN UltraSPARC T2 CPU)
+	- 'SUNW,vf-rng' for Victoria Falls Platform (SUN UltraSPARC T2 Plus CPU)
+	- 'SUNW,kt-rng' for Rainbow/Yosemite Falls Platform (SUN SPARC T3/T4), (UltraSPARC KT/Niagara 3 - development names)
+	more recent systems (after Oracle acquisition of SUN)
+	- 'ORCL,m4-rng' for SPARC T5/M5
+	- 'ORCL,m7-rng' for SPARC T7/M7
+
+Examples:
+/* linux LDOM on SPARC T5-2 */
+Node 0xf029a4f4
+	.node:  f029a4f4
+	rng-#units:  00000002
+	compatible: 'ORCL,m4-rng'
+	reg:  0000000e
+	name: 'random-number-generator'
+
+/* solaris on SPARC M7-8 */
+Node 0xf028c08c
+	rng-#units:  00000003
+	compatible: 'ORCL,m7-rng'
+	reg:  0000000e
+	name:  'random-number-generator'
+
+PS: see as well prtconfs.git by DaveM
diff --git a/Documentation/devicetree/bindings/rng/st,rng.yaml b/Documentation/devicetree/bindings/rng/st,rng.yaml
new file mode 100644
index 0000000000..ff1211ef90
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/st,rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Hardware Random Number Generator
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,rng
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@fee80000 {
+        compatible = "st,rng";
+        reg = <0xfee80000 0x1000>;
+        clocks = <&clk_sysin>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
new file mode 100644
index 0000000000..187b172d0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/st,stm32-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 RNG
+
+description: |
+  The STM32 hardware random number generator is a simple fixed purpose
+  IP and is fully separated from other crypto functions.
+
+maintainers:
+  - Lionel Debieve <lionel.debieve@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-rng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-error-detect:
+    type: boolean
+    description: If set enable the clock detection management
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    rng@54003000 {
+      compatible = "st,stm32-rng";
+      reg = <0x54003000 0x400>;
+      clocks = <&rcc RNG1_K>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml b/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml
new file mode 100644
index 0000000000..2b76ce25ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/starfive,jh7110-trng.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/starfive,jh7110-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive SoC TRNG Module
+
+maintainers:
+  - Jia Jie Ho <jiajie.ho@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-trng
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Hardware reference clock
+      - description: AHB reference clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: ahb
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    rng: rng@1600C000 {
+        compatible = "starfive,jh7110-trng";
+        reg = <0x1600C000 0x4000>;
+        clocks = <&clk 15>, <&clk 16>;
+        clock-names = "hclk", "ahb";
+        resets = <&reset 3>;
+        interrupts = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml
new file mode 100644
index 0000000000..06a6791b33
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,keystone-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone SoC Hardware Random Number Generator
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+  - Santosh Shilimkar <ssantosh@kernel.org>
+
+properties:
+  compatible:
+    const: ti,keystone-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  reg:
+    maxItems: 1
+
+  ti,syscon-sa-cfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to syscon node of the SA configuration registers.  These
+      registers are shared between HWRNG and crypto drivers.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - ti,syscon-sa-cfg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@24000 {
+        compatible = "ti,keystone-rng";
+        ti,syscon-sa-cfg = <&sa_config>;
+        clocks = <&clksa>;
+        clock-names = "fck";
+        reg = <0x24000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml
new file mode 100644
index 0000000000..9a58440b1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,omap-rom-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP ROM Random Number Generator
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does.
+  The implementation can depend on the SoC secure ROM used.
+
+properties:
+  compatible:
+    const: nokia,n900-rom-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ick
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng {
+        compatible = "nokia,n900-rom-rng";
+        clocks = <&rng_ick>;
+        clock-names = "ick";
+    };
diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml
new file mode 100644
index 0000000000..4754174e98
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/timeriomem_rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TimerIO Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: timeriomem_rng
+
+  period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: wait time in microseconds to use between samples
+
+  quality:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Estimated number of bits of true entropy per 1024 bits read from the rng.
+      Defaults to zero which causes the kernel's default quality to be used
+      instead.  Note that the default quality is usually zero which disables
+      using this rng to automatically fill the kernel's entropy pool.
+
+  reg:
+    maxItems: 1
+    description:
+      Base address to sample from. Currently 'reg' must be at least four bytes
+      wide and 32-bit aligned.
+
+required:
+  - compatible
+  - period
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@44 {
+        compatible = "timeriomem_rng";
+        reg = <0x44 0x04>;
+        period = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml
new file mode 100644
index 0000000000..d831322911
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/xiphera,xip8001b-trng.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/xiphera,xip8001b-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xiphera XIP8001B-trng
+
+maintainers:
+  - Atte Tommiska <atte.tommiska@xiphera.com>
+
+description: |
+  Xiphera FPGA-based true random number generator intellectual property core.
+
+properties:
+  compatible:
+    const: xiphera,xip8001b-trng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@43c00000 {
+        compatible = "xiphera,xip8001b-trng";
+        reg = <0x43c00000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 0000000000..2405e35a1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,31 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+        "abracon,abx80x"
+        "abracon,ab0801"
+        "abracon,ab0803"
+        "abracon,ab0804"
+        "abracon,ab0805"
+        "abracon,ab1801"
+        "abracon,ab1803"
+        "abracon,ab1804"
+        "abracon,ab1805"
+        "microcrystal,rv1805"
+	Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+                          resistor, the other values are in kOhm.
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
new file mode 100644
index 0000000000..054e1e397f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/allwinner,sun4i-a10-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-rtc
+      - allwinner,sun7i-a20-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc: rtc@1c20d00 {
+        compatible = "allwinner,sun4i-a10-rtc";
+        reg = <0x01c20d00 0x20>;
+        interrupts = <24>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
new file mode 100644
index 0000000000..4531eec568
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/allwinner,sun6i-a31-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 RTC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun6i-a31-rtc
+          - allwinner,sun8i-a23-rtc
+          - allwinner,sun8i-h3-rtc
+          - allwinner,sun8i-r40-rtc
+          - allwinner,sun8i-v3-rtc
+          - allwinner,sun50i-h5-rtc
+          - allwinner,sun50i-h6-rtc
+          - allwinner,sun50i-h616-rtc
+          - allwinner,sun50i-r329-rtc
+      - items:
+          - const: allwinner,sun50i-a64-rtc
+          - const: allwinner,sun8i-h3-rtc
+      - items:
+          - const: allwinner,sun20i-d1-rtc
+          - const: allwinner,sun50i-r329-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: RTC Alarm 0
+      - description: RTC Alarm 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 3
+    description:
+      The RTC provides up to three clocks
+        - the Low Frequency Oscillator or LOSC, at index 0,
+        - the Low Frequency Oscillator External output (X32KFOUT in
+          the datasheet), at index 1,
+        - the Internal Oscillator, at index 2.
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-rtc
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a23-rtc
+              - allwinner,sun8i-r40-rtc
+              - allwinner,sun8i-v3-rtc
+
+    then:
+      properties:
+        clock-output-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-h3-rtc
+              - allwinner,sun50i-h5-rtc
+              - allwinner,sun50i-h6-rtc
+
+    then:
+      properties:
+        clock-output-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h616-rtc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock for register access
+            - description: 24 MHz oscillator
+            - description: 32 kHz clock from the CCU
+
+        clock-names:
+          items:
+            - const: bus
+            - const: hosc
+            - const: pll-32k
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-r329-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Bus clock for register access
+            - description: 24 MHz oscillator
+            - description: AHB parent for internal SPI clock
+            - description: External 32768 Hz oscillator
+
+        clock-names:
+          minItems: 3
+          items:
+            - const: bus
+            - const: hosc
+            - const: ahb
+            - const: ext-osc32k
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-r40-rtc
+              - allwinner,sun50i-h616-rtc
+              - allwinner,sun50i-r329-rtc
+
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+
+    else:
+      properties:
+        interrupts:
+          minItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc: rtc@1f00000 {
+        compatible = "allwinner,sun6i-a31-rtc";
+        reg = <0x01f00000 0x400>;
+        interrupts = <0 40 4>, <0 41 4>;
+        clock-output-names = "osc32k";
+        clocks = <&ext_osc32k>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt
new file mode 100644
index 0000000000..76ebca568d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/alphascale,asm9260-rtc.txt
@@ -0,0 +1,19 @@
+* Alphascale asm9260 SoC Real Time Clock
+
+Required properties:
+- compatible: Should be "alphascale,asm9260-rtc"
+- reg: Physical base address of the controller and length
+       of memory mapped region.
+- interrupts: IRQ line for the RTC.
+- clocks: Reference to the clock entry.
+- clock-names: should contain:
+  * "ahb" for the SoC RTC clock
+
+Example:
+rtc0: rtc@800a0000 {
+	compatible = "alphascale,asm9260-rtc";
+	reg = <0x800a0000 0x100>;
+	clocks = <&acc CLKID_AHB_RTC>;
+	clock-names = "ahb";
+	interrupts = <2>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
new file mode 100644
index 0000000000..a89865fa67
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson-vrtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Virtual RTC (VRTC)
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  This is a Linux interface to an RTC managed by firmware, hence it's
+  virtual from a Linux perspective.  The interface is 1 register where
+  an alarm time (in seconds) is to be written.
+  The alarm register is a simple scratch register shared between the
+  application processors (AP) and the secure co-processor (SCP.)  When
+  the AP suspends, the SCP will use the value of this register to
+  program an always-on timer before going sleep. When the timer expires,
+  the SCP will wake up and will then wake the AP.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-vrtc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@a8 {
+      compatible = "amlogic,meson-vrtc";
+      reg = <0x000a8 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml
new file mode 100644
index 0000000000..8bf7d3a9be
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson6-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-rtc
+      - amlogic,meson8-rtc
+      - amlogic,meson8b-rtc
+      - amlogic,meson8m2-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc: rtc@740 {
+        compatible = "amlogic,meson6-rtc";
+        reg = <0x740 0x14>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&rtc32k_xtal>;
+        vdd-supply = <&rtc_vdd>;
+        resets = <&reset_rtc>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mac@0 {
+            reg = <0 6>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/arm,pl031.yaml b/Documentation/devicetree/bindings/rtc/arm,pl031.yaml
new file mode 100644
index 0000000000..fa5f2eda37
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/arm,pl031.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/arm,pl031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Primecell PL031 Real Time Clock
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl031
+  required:
+    - compatible
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl031
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  start-year: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@10017000 {
+        compatible = "arm,pl031", "arm,primecell";
+        reg = <0x10017000 0x1000>;
+        clocks = <&pclk>;
+        clock-names = "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
new file mode 100644
index 0000000000..c3c9a1226f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt
@@ -0,0 +1,24 @@
+* Real Time Clock of the Armada 38x/7K/8K SoCs
+
+RTC controller for the Armada 38x, 7K and 8K SoCs
+
+Required properties:
+- compatible : Should be one of the following:
+	"marvell,armada-380-rtc" for Armada 38x SoC
+	"marvell,armada-8k-rtc" for Aramda 7K/8K SoCs
+- reg: a list of base address and size pairs, one for each entry in
+  reg-names
+- reg names: should contain:
+  * "rtc" for the RTC registers
+  * "rtc-soc" for the SoC related registers and among them the one
+    related to the interrupt.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@a3800 {
+	compatible = "marvell,armada-380-rtc";
+	reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+	reg-names = "rtc", "rtc-soc";
+	interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
new file mode 100644
index 0000000000..c8bb2eef44
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/atmel,at91rm9200-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91rm9200-rtc
+          - atmel,at91sam9x5-rtc
+          - atmel,sama5d4-rtc
+          - atmel,sama5d2-rtc
+          - microchip,sam9x60-rtc
+          - microchip,sama7g5-rtc
+      - items:
+          - const: microchip,sam9x7-rtc
+          - const: microchip,sam9x60-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@fffffe00 {
+        compatible = "atmel,at91rm9200-rtc";
+        reg = <0xfffffe00 0x100>;
+        interrupts = <1 4 7>;
+        clocks = <&clk32k>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
new file mode 100644
index 0000000000..b80b85c394
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/atmel,at91sam9260-rtt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 RTT
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9260-rtt
+      - items:
+          - const: microchip,sam9x60-rtt
+          - const: atmel,at91sam9260-rtt
+      - items:
+          - const: microchip,sama7g5-rtt
+          - const: microchip,sam9x60-rtt
+          - const: atmel,at91sam9260-rtt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,rtt-rtc-time-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the GPBR node.
+          - description: Offset within the GPBR block.
+    description:
+      Should encode the GPBR register used to store the time base when the
+      RTT is used as an RTC. The first cell should point to the GPBR node
+      and the second one encodes the offset within the GPBR block (or in
+      other words, the GPBR register used to store the time base).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - atmel,rtt-rtc-time-reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@fffffd20 {
+        compatible = "atmel,at91sam9260-rtt";
+        reg = <0xfffffd20 0x10>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&clk32k>;
+        atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml
new file mode 100644
index 0000000000..c5e5c5aec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/brcm,brcmstb-waketimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB wake-up Timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
+  ability to wake up the system from low-power suspend/standby modes and
+  optionally generate RTC alarm interrupts.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: brcm,brcmstb-waketimer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: the TIMER interrupt
+      - description: the ALARM interrupt
+    description:
+      The TIMER interrupt wakes the system from low-power suspend/standby modes.
+      An ALARM interrupt may be specified to interrupt the CPU when an RTC alarm
+      is enabled.
+
+  clocks:
+    description: clock reference in the 27MHz domain
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@f041a080 {
+        compatible = "brcm,brcmstb-waketimer";
+        reg = <0xf041a080 0x14>;
+        interrupts-extended = <&aon_pm_l2_intc 0x04>,
+                              <&upg_aux_aon_intr2_intc 0x08>;
+        clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/cdns,rtc.txt b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
new file mode 100644
index 0000000000..14a04487b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/cdns,rtc.txt
@@ -0,0 +1,25 @@
+Cadence Real Time Clock
+
+The Cadence RTC controller with date, time and alarm capabilities.
+The alarm may wake the system from low-power state.
+
+Required properties:
+- compatible: Should be "cdns,rtc-r109v3"
+- reg: Specifies base physical address and size of the register area.
+- interrupts: A single interrupt specifier.
+- clocks: Must contain two entries:
+	- pclk: APB registers clock
+	- ref_clk: reference 1Hz or 100Hz clock, depending on IP configuration
+	See ../clocks/clock-bindings.txt for details.
+
+Example:
+        rtc0: rtc@fd080000 {
+        	compatible = "cdns,rtc-r109v3";
+        	reg = <0xfd080000 0x1000>;
+
+        	clock-names = "pclk", "ref_clk";
+        	clocks = <&sysclock>, <&refclock>;
+
+        	interrupt-parent = <&gic>;
+        	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+        };
diff --git a/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt b/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
new file mode 100644
index 0000000000..45750ff311
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
@@ -0,0 +1,18 @@
+Motorola CPCAP PMIC RTC
+-----------------------
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+Requires node properties:
+- compatible: should contain "motorola,cpcap-rtc"
+- interrupts: An interrupt specifier for alarm and 1 Hz irq
+
+Example:
+
+&cpcap {
+	cpcap_rtc: rtc {
+		compatible = "motorola,cpcap-rtc";
+		interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt
new file mode 100644
index 0000000000..9882b819f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt
@@ -0,0 +1,18 @@
+* Dallas DS1390		SPI Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "dallas,ds1390".
+- reg: SPI address for chip
+
+Optional properties:
+- trickle-resistor-ohms : Selected resistor for trickle charger
+	Values usable for ds1390 are 250, 2000, 4000
+	Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+	Should be given if internal trickle charger diode should be disabled
+Example:
+	ds1390: rtc@0 {
+		compatible = "dallas,ds1390";
+		trickle-resistor-ohms = <250>;
+		reg = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt
new file mode 100644
index 0000000000..d464986012
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/digicolor-rtc.txt
@@ -0,0 +1,17 @@
+Conexant Digicolor Real Time Clock controller
+
+This binding currently supports the CX92755 SoC.
+
+Required properties:
+- compatible: should be "cnxt,cx92755-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+	rtc@f0000c30 {
+		compatible = "cnxt,cx92755-rtc";
+		reg = <0xf0000c30 0x18>;
+		interrupts = <25>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/epson,rtc7301.txt b/Documentation/devicetree/bindings/rtc/epson,rtc7301.txt
new file mode 100644
index 0000000000..5f9df3f146
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rtc7301.txt
@@ -0,0 +1,16 @@
+EPSON TOYOCOM RTC-7301SF/DG
+
+Required properties:
+
+- compatible: Should be "epson,rtc7301sf" or "epson,rtc7301dg"
+- reg: Specifies base physical address and size of the registers.
+- interrupts: A single interrupt specifier.
+
+Example:
+
+rtc: rtc@44a00000 {
+	compatible = "epson,rtc7301dg";
+	reg = <0x44a00000 0x10000>;
+	interrupt-parent = <&axi_intc_0>;
+	interrupts = <3 2>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
new file mode 100644
index 0000000000..3dc313e01f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
@@ -0,0 +1,39 @@
+Epson RX6110 Real Time Clock
+============================
+
+The Epson RX6110 can be used with SPI or I2C busses. The kind of
+bus depends on the SPISEL pin and can not be configured via software.
+
+I2C mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg : the I2C address of the device for I2C
+
+Example:
+
+	rtc: rtc@32 {
+		compatible = "epson,rx6110"
+		reg = <0x32>;
+	};
+
+SPI mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg: chip select number
+  - spi-cs-high: RX6110 needs chipselect high
+  - spi-cpha: RX6110 works with SPI shifted clock phase
+  - spi-cpol: RX6110 works with SPI inverse clock polarity
+
+Example:
+
+	rtc: rtc@3 {
+		compatible = "epson,rx6110"
+		reg = <3>
+		spi-cs-high;
+		spi-cpha;
+		spi-cpol;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
new file mode 100644
index 0000000000..1df7c45d95
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/epson,rx8900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EPSON RX8900 / Microcrystal RV8803 Real-Time Clock
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - epson,rx8804
+      - epson,rx8900
+      - microcrystal,rv8803
+
+  reg:
+    maxItems: 1
+
+  epson,vdet-disable:
+    type: boolean
+    description: |
+      Disable voltage detector. Should be set if no backup battery is used.
+
+  trickle-diode-disable: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@32 {
+            compatible = "epson,rx8900";
+            reg = <0x32>;
+            epson,vdet-disable;
+            trickle-diode-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
new file mode 100644
index 0000000000..b1c1a0e213
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/faraday,ftrtc010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTRTC010 Real Time Clock
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This RTC appears in for example the Storlink Gemini family of SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftrtc010
+      - items:
+          - const: cortina,gemini-rtc
+          - const: faraday,ftrtc010
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCLK clocks
+      - description: EXTCLK clocks. Faraday calls it CLK1HZ and says the clock
+          should be 1 Hz, but implementers actually seem to choose different
+          clocks here, like Cortina who chose 32768 Hz (a typical low-power clock).
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: EXTCLK
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    rtc@45000000 {
+      compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
+      reg = <0x45000000 0x100>;
+      interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&foo 0>, <&foo 1>;
+      clock-names = "PCLK", "EXTCLK";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml
new file mode 100644
index 0000000000..dd1b1abf1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - RTC Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-sc-rtc
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc {
+        compatible = "fsl,imx8qxp-sc-rtc";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt b/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
new file mode 100644
index 0000000000..634312dd95
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
@@ -0,0 +1,17 @@
+Android Goldfish RTC
+
+Android Goldfish RTC device used by Android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-rtc"
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_timer@9020000 {
+		compatible = "google,goldfish-rtc";
+		reg = <0x9020000 0x1000>;
+		interrupts = <0x3>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
new file mode 100644
index 0000000000..0b9f39ef0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/haoyu,hym8563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Haoyu Microelectronics HYM8563 RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: haoyu,hym8563
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    description: From common clock binding to override the default output clock name.
+    maxItems: 1
+
+  wakeup-source:
+    description: Enables wake up of host system on alarm.
+
+allOf:
+  - $ref: rtc.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "haoyu,hym8563";
+            reg = <0x51>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+            #clock-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml
new file mode 100644
index 0000000000..4807c95a66
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX25 Real Time Clock controller
+
+maintainers:
+  - Roland Stigge <stigge@antcom.de>
+
+properties:
+  compatible:
+    const: fsl,imx25-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: rtc alarm interrupt
+      - description: dryice security violation interrupt
+    minItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@53ffc000 {
+        compatible = "fsl,imx25-rtc";
+        reg = <0x53ffc000 0x4000>;
+        clocks = <&clks 81>;
+        interrupts = <25>, <56>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
new file mode 100644
index 0000000000..de9879bdb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ingenic,rtc.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Real-Time Clock
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ingenic,jz4770-rtc
+                - ingenic,jz4780-rtc
+    then:
+      properties:
+        "#clock-cells": false
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-rtc
+          - ingenic,jz4760-rtc
+      - items:
+          - const: ingenic,jz4725b-rtc
+          - const: ingenic,jz4740-rtc
+      - items:
+          - enum:
+              - ingenic,jz4770-rtc
+              - ingenic,jz4780-rtc
+          - const: ingenic,jz4760-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+  "#clock-cells":
+    const: 0
+
+  system-power-controller:
+    description: |
+      Indicates that the RTC is responsible for powering OFF
+      the system.
+    type: boolean
+
+  ingenic,reset-pin-assert-time-ms:
+    minimum: 0
+    maximum: 125
+    default: 60
+    description: |
+      Reset pin low-level assertion time after wakeup
+      (assuming RTC clock at 32 kHz)
+
+  ingenic,min-wakeup-pin-assert-time-ms:
+    minimum: 0
+    maximum: 2000
+    default: 100
+    description: |
+      Minimum wakeup pin assertion time
+      (assuming RTC clock at 32 kHz)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    rtc_dev: rtc@10003000 {
+      compatible = "ingenic,jz4740-rtc";
+      reg = <0x10003000 0x40>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <15>;
+
+      clocks = <&cgu JZ4740_CLK_RTC>;
+      clock-names = "rtc";
+    };
+
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    rtc: rtc@10003000 {
+      compatible = "ingenic,jz4780-rtc", "ingenic,jz4760-rtc";
+      reg = <0x10003000 0x4c>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <32>;
+
+      clocks = <&cgu JZ4780_CLK_RTCLK>;
+      clock-names = "rtc";
+
+      #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml b/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
new file mode 100644
index 0000000000..c2d1441ef2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/intersil,isl12022.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/intersil,isl12022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL12022 Real-time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: isil,isl12022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  isil,battery-trip-levels-microvolt:
+    description:
+      The battery voltages at which the first alarm and second alarm
+      should trigger (normally ~85% and ~75% of nominal V_BAT).
+    items:
+      - enum: [2125000, 2295000, 2550000, 2805000, 3060000, 4250000, 4675000]
+      - enum: [1875000, 2025000, 2250000, 2475000, 2700000, 3750000, 4125000]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  # If #clock-cells is present, interrupts must not be present
+  - if:
+      required:
+        - '#clock-cells'
+    then:
+      properties:
+        interrupts: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "isil,isl12022";
+            reg = <0x6f>;
+            interrupts-extended = <&gpio1 5 IRQ_TYPE_LEVEL_LOW>;
+            isil,battery-trip-levels-microvolt = <2550000>, <2250000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
new file mode 100644
index 0000000000..2e0be45193
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
@@ -0,0 +1,28 @@
+ISL12026 I2C RTC/EEPROM
+
+ISL12026 is an I2C RTC/EEPROM combination device.  The RTC and control
+registers respond at bus address 0x6f, and the EEPROM array responds
+at bus address 0x57.  The canonical "reg" value will be for the RTC portion.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl12026"
+ - "reg": I2C bus address of the device (always 0x6f)
+
+Optional properties:
+
+ - "isil,pwr-bsw": If present PWR.BSW bit must be set to the specified
+                   value for proper operation.
+
+ - "isil,pwr-sbib": If present PWR.SBIB bit must be set to the specified
+                    value for proper operation.
+
+
+Example:
+
+	rtc@6f {
+		compatible = "isil,isl12026";
+		reg = <0x6f>;
+		isil,pwr-bsw = <0>;
+		isil,pwr-sbib = <1>;
+	}
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
new file mode 100644
index 0000000000..ff7c435551
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12057.txt
@@ -0,0 +1,74 @@
+Intersil ISL12057 I2C RTC/Alarm chip
+
+ISL12057 is a trivial I2C device (it has simple device tree bindings,
+consisting of a compatible field, an address and possibly an interrupt
+line).
+
+Nonetheless, it also supports an option boolean property
+("wakeup-source") to handle the specific use-case found
+on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
+and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
+(associated with the alarm supported by the driver) is not connected
+to the SoC but to a PMIC. It allows the device to be powered up when
+RTC alarm rings. In order to mark the device has a wakeup source and
+get access to the 'wakealarm' sysfs entry, this specific property can
+be set when the IRQ#2 pin of the chip is not connected to the SoC but
+can wake up the device.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl12057"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "wakeup-source": mark the chip as a wakeup source, independently of
+    the availability of an IRQ line connected to the SoC.
+
+
+Example isl12057 node without IRQ#2 pin connected (no alarm support):
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+	};
+
+
+Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note
+that the pinctrl-related properties below are given for completeness and
+may not be required or may be different depending on your system or
+SoC, and the main function of the MPP used as IRQ line, i.e.
+"interrupt-parent" and "interrupts" are usually sufficient):
+
+		    pinctrl {
+				...
+
+				rtc_alarm_pin: rtc_alarm_pin {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				...
+
+		    };
+
+	...
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+		pinctrl-0 = <&rtc_alarm_pin>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+
+Example isl12057 node without IRQ#2 pin connected to the SoC but to a
+PMIC, allowing the device to be started based on configured alarm:
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+		wakeup-source;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
new file mode 100644
index 0000000000..11f7378d49
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1208.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl1208.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL1209/19 I2C RTC/Alarm chip with event in
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Trent Piepho <tpiepho@gmail.com>
+
+description:
+  ISL12X9 have additional pins EVIN and EVDET for tamper detection, while the
+  ISL1208 and ISL1218 do not.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl1208
+      - isil,isl1209
+      - isil,isl1218
+      - isil,isl1219
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: |
+      Use xin, if connected to an external crystal.
+      Use clkin, if connected to an external clock signal.
+    enum:
+      - xin
+      - clkin
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: irq
+      - const: evdet
+
+  isil,ev-evienb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description: |
+      Enable or disable internal pull on EVIN pin
+      Default will leave the non-volatile configuration of the pullup
+      as is.
+        <0> : Enables internal pull-up on evin pin
+        <1> : Disables internal pull-up on evin pin
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - isil,isl1209
+              - isil,isl1219
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: irq
+            - const: evdet
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: irq
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc_twi: rtc@6f {
+            compatible = "isil,isl1208";
+            reg = <0x6f>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml
new file mode 100644
index 0000000000..f89c1f660a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/loongson,rtc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/loongson,rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Real-Time Clock
+
+description:
+  The Loongson family chips use an on-chip counter 0 (Time Of Year
+  counter) as the RTC.
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls1b-rtc
+          - loongson,ls1c-rtc
+          - loongson,ls7a-rtc
+          - loongson,ls2k1000-rtc
+      - items:
+          - enum:
+              - loongson,ls2k2000-rtc
+              - loongson,ls2k0500-rtc
+          - const: loongson,ls7a-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@1fe27800 {
+        compatible = "loongson,ls2k1000-rtc";
+        reg = <0x1fe27800 0x100>;
+
+        interrupt-parent = <&liointc1>;
+        interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt
new file mode 100644
index 0000000000..a87a1e9bc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/lpc32xx-rtc.txt
@@ -0,0 +1,15 @@
+* NXP LPC32xx SoC Real Time Clock controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The RTC interrupt
+
+Example:
+
+	rtc@40024000 {
+		compatible = "nxp,lpc3220-rtc";
+		reg = <0x40024000 0x1000>;
+		interrupts = <52 0>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt
new file mode 100644
index 0000000000..d0f937c355
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim,ds1742.txt
@@ -0,0 +1,12 @@
+* Maxim (Dallas) DS1742/DS1743 Real Time Clock
+
+Required properties:
+- compatible: Should contain "maxim,ds1742".
+- reg: Physical base address of the RTC and length of memory
+  mapped region.
+
+Example:
+	rtc: rtc@10000000 {
+		compatible = "maxim,ds1742";
+		reg = <0x10000000 0x800>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt b/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt
new file mode 100644
index 0000000000..a59fdd8c23
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim,mcp795.txt
@@ -0,0 +1,11 @@
+* Maxim MCP795		SPI Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "maxim,mcp795".
+- reg: SPI address for chip
+
+Example:
+	mcp795: rtc@0 {
+		compatible = "maxim,mcp795";
+		reg = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
new file mode 100644
index 0000000000..ba470c56cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
@@ -0,0 +1,46 @@
+* Maxim/Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+The device uses the standard MicroWire half-duplex transfer timing.
+Master output is set on low clock and sensed by the RTC on the rising
+edge. Master input is set by the RTC on the trailing edge and is sensed
+by the master on low clock.
+
+Required properties:
+
+- compatible : Should be "maxim,ds1302"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+  the controller.
+
+- spi-max-frequency : DS-1302 has 500 kHz if powered at 2.2V,
+  and 2MHz if powered at 5V.
+
+- spi-3wire : The device has a shared signal IN/OUT line.
+
+- spi-lsb-first : DS-1302 requires least significant bit first
+  transfers.
+
+- spi-cs-high: DS-1302 has active high chip select line. This is
+  required unless inverted in hardware.
+
+Example:
+
+spi@901c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "icpdas,lp8841-spi-rtc";
+	reg = <0x901c 0x1>;
+
+	rtc@0 {
+		compatible = "maxim,ds1302";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+		spi-3wire;
+		spi-lsb-first;
+		spi-cs-high;
+	};
+};
diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
new file mode 100644
index 0000000000..7742465b93
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Soc (MPFS) RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Lewis Hanly <lewis.hanly@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: |
+          RTC_WAKEUP interrupt
+      - description: |
+          RTC_MATCH, asserted when the content of the Alarm register is equal
+          to that of the RTC's count register.
+
+  clocks:
+    items:
+      - description: |
+          AHB clock
+      - description: |
+          Reference clock: divided by the prescaler to create a time-based
+          strobe (typically 1 Hz) for the calendar counter. By default, the rtc
+          on the PolarFire SoC shares it's reference with MTIMER so this will
+          be a 1 MHz clock.
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: rtcref
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    rtc@20124000 {
+        compatible = "microchip,mpfs-rtc";
+        reg = <0x20124000 0x1000>;
+        clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+        clock-names = "rtc", "rtcref";
+        interrupts = <80>, <81>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt b/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt
new file mode 100644
index 0000000000..180b7144bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microchip,pic32-rtc.txt
@@ -0,0 +1,21 @@
+* Microchip PIC32 Real Time Clock and Calendar
+
+The RTCC keeps time in hours, minutes, and seconds, and one half second. It
+provides a calendar in weekday, date, month, and year. It also provides a
+configurable alarm.
+
+Required properties:
+- compatible: should be: "microchip,pic32mzda-rtc"
+- reg: physical base address of the controller and length of memory mapped
+    region.
+- interrupts: RTC alarm/event interrupt
+- clocks: clock phandle
+
+Example:
+
+	rtc: rtc@1f8c0000 {
+		compatible = "microchip,pic32mzda-rtc";
+		reg = <0x1f8c0000 0x60>;
+		interrupts = <166 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&PBCLK6>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml
new file mode 100644
index 0000000000..5ade5dfad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microcrystal,rv3028.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip RV-3028 RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: microcrystal,rv3028
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  trickle-resistor-ohms:
+    enum:
+      - 3000
+      - 5000
+      - 9000
+      - 15000
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "microcrystal,rv3028";
+            reg = <0x51>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            trickle-resistor-ohms = <3000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
new file mode 100644
index 0000000000..27a9de10f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip RV-3032 RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: microcrystal,rv3032
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  trickle-resistor-ohms:
+    enum:
+      - 1000
+      - 2000
+      - 7000
+      - 11000
+
+  trickle-voltage-millivolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1750
+      - 3000
+      - 4400
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "microcrystal,rv3032";
+            reg = <0x51>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            trickle-resistor-ohms = <7000>;
+            trickle-voltage-millivolt = <1750>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt b/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt
new file mode 100644
index 0000000000..1374df7bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/moxa,moxart-rtc.txt
@@ -0,0 +1,17 @@
+MOXA ART real-time clock
+
+Required properties:
+
+- compatible : Should be "moxa,moxart-rtc"
+- rtc-sclk-gpios : RTC sclk gpio, with zero flags
+- rtc-data-gpios : RTC data gpio, with zero flags
+- rtc-reset-gpios : RTC reset gpio, with zero flags
+
+Example:
+
+	rtc: rtc {
+		compatible = "moxa,moxart-rtc";
+		rtc-sclk-gpios = <&gpio 5 0>;
+		rtc-data-gpios = <&gpio 6 0>;
+		rtc-reset-gpios = <&gpio 7 0>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
new file mode 100644
index 0000000000..af4a31cd09
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mstar,msc313-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2400 {
+        compatible = "mstar,msc313-rtc";
+        reg = <0x2400 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
new file mode 100644
index 0000000000..4f9b5604ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,nct3018y.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NUVOTON NCT3018Y Real Time Clock
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Medad CChien <ctcchien@nuvoton.com>
+  - Mia Lin <mimi05633@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,nct3018y
+
+  reg:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "nuvoton,nct3018y";
+            reg = <0x6f>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml
new file mode 100644
index 0000000000..17d6280e55
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nvidia,tegra20-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra real-time clock
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra RTC maintains seconds and milliseconds counters, and five
+  alarm registers. The alarms and other interrupts may wake the system
+  from low-power state.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-rtc
+      - items:
+          - enum:
+              - nvidia,tegra30-rtc
+              - nvidia,tegra114-rtc
+              - nvidia,tegra124-rtc
+              - nvidia,tegra210-rtc
+              - nvidia,tegra186-rtc
+              - nvidia,tegra194-rtc
+              - nvidia,tegra234-rtc
+          - const: nvidia,tegra20-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    timer@7000e000 {
+        compatible = "nvidia,tegra20-rtc";
+        reg = <0x7000e000 0x100>;
+        interrupts = <0 2 0x04>;
+        clocks = <&tegra_car 4>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
new file mode 100644
index 0000000000..3c97bd1805
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt
@@ -0,0 +1,21 @@
+NXP LPC1788 real-time clock
+
+The LPC1788 RTC provides calendar and clock functionality
+together with periodic tick and alarm interrupt support.
+
+Required properties:
+- compatible	: must contain "nxp,lpc1788-rtc"
+- reg		: Specifies base physical address and size of the registers.
+- interrupts	: A single interrupt specifier.
+- clocks	: Must contain clock specifiers for rtc and register clock
+- clock-names	: Must contain "rtc" and "reg"
+  See ../clocks/clock-bindings.txt for details.
+
+Example:
+rtc: rtc@40046000 {
+	compatible = "nxp,lpc1788-rtc";
+	reg = <0x40046000 0x1000>;
+	interrupts = <47>;
+	clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+	clock-names = "rtc", "reg";
+};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
new file mode 100644
index 0000000000..2d9fe5a75b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf2127.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF2127 Real Time Clock
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca2129
+      - nxp,pcf2127
+      - nxp,pcf2129
+      - nxp,pcf2131
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "nxp,pcf2127";
+            reg = <0x51>;
+            pinctrl-0 = <&rtc_nint_pins>;
+            interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
+            reset-source;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
new file mode 100644
index 0000000000..2f892f8640
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF85063 Real Time Clock
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+properties:
+  compatible:
+    enum:
+      - microcrystal,rv8263
+      - nxp,pcf85063
+      - nxp,pcf85063a
+      - nxp,pcf85063tp
+      - nxp,pca85073a
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [7000, 12500]
+    default: 7000
+
+  clock:
+    $ref: /schemas/clock/fixed-clock.yaml
+    description:
+      Provide this if the square wave pin is used as boot-enabled
+      fixed clock.
+
+  wakeup-source: true
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microcrystal,rv8263
+    then:
+      properties:
+        quartz-load-femtofarads: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pcf85063
+    then:
+      properties:
+        quartz-load-femtofarads:
+          const: 7000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+          compatible = "nxp,pcf85063a";
+          reg = <0x51>;
+          quartz-load-femtofarads = <12500>;
+
+          clock {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <32768>;
+          };
+        };
+      };
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt
new file mode 100644
index 0000000000..0b1080c60f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8523.txt
@@ -0,0 +1,18 @@
+* NXP PCF8523 Real Time Clock
+
+Required properties:
+- compatible: Should contain "nxp,pcf8523".
+- reg: I2C address for chip.
+
+Optional property:
+- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
+  expressed in femto Farad (fF). Valid values are 7000 and 12500.
+  Default value (if no value is specified) is 12500fF.
+
+Example:
+
+pcf8523: rtc@68 {
+	compatible = "nxp,pcf8523";
+	reg = <0x68>;
+	quartz-load-femtofarads = <7000>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85363.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85363.yaml
new file mode 100644
index 0000000000..52aa3e2091
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85363.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Philips PCF85263/PCF85363 Real Time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nxp,pcf85263
+      - nxp,pcf85363
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [6000, 7000, 12500]
+    default: 7000
+
+  start-year: true
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "nxp,pcf85363";
+            reg = <0x51>;
+            #clock-cells = <0>;
+            quartz-load-femtofarads = <12500>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml
new file mode 100644
index 0000000000..22909a9612
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf8563.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Philips PCF8563/Epson RTC8564 Real Time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - epson,rtc8564
+      - microcrystal,rv8564
+      - nxp,pca8565
+      - nxp,pcf8563
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "nxp,pcf8563";
+            reg = <0x51>;
+            #clock-cells = <0>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
new file mode 100644
index 0000000000..7371f525a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,rtc-2123.txt
@@ -0,0 +1,17 @@
+NXP PCF2123 SPI Real Time Clock
+
+Required properties:
+- compatible: should be: "nxp,pcf2123"
+                      or "microcrystal,rv2123"
+- reg: should be the SPI slave chipselect address
+
+Optional properties:
+- spi-cs-high: PCF2123 needs chipselect high
+
+Example:
+
+pcf2123: rtc@3 {
+	compatible = "nxp,pcf2123"
+	reg = <3>
+	spi-cs-high;
+};
diff --git a/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
new file mode 100644
index 0000000000..a2891ceb63
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/olpc-xo1-rtc.txt
@@ -0,0 +1,5 @@
+OLPC XO-1 RTC
+~~~~~~~~~~~~~
+
+Required properties:
+ - compatible : "olpc,xo1-rtc"
diff --git a/Documentation/devicetree/bindings/rtc/orion-rtc.txt b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
new file mode 100644
index 0000000000..3bf63ffa51
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/orion-rtc.txt
@@ -0,0 +1,18 @@
+* Mvebu Real Time Clock
+
+RTC controller for the Kirkwood, the Dove, the Armada 370 and the
+Armada XP SoCs
+
+Required properties:
+- compatible : Should be "marvell,orion-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@10300 {
+        compatible = "marvell,orion-rtc";
+        reg = <0xd0010300 0x20>;
+        interrupts = <50>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
new file mode 100644
index 0000000000..8c6672a1b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt
@@ -0,0 +1,14 @@
+* PXA RTC
+
+PXA specific RTC driver.
+
+Required properties:
+- compatible : Should be "marvell,pxa-rtc"
+
+Examples:
+
+rtc@40900000 {
+	compatible = "marvell,pxa-rtc";
+	reg = <0x40900000 0x3c>;
+	interrupts = <30 31>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
new file mode 100644
index 0000000000..b95a69cc9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC RTC device
+
+maintainers:
+  - Satya Priya <quic_c_skakit@quicinc.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8058-rtc
+          - qcom,pm8921-rtc
+          - qcom,pm8941-rtc
+          - qcom,pmk8350-rtc
+      - items:
+          - enum:
+              - qcom,pm8018-rtc
+          - const: qcom,pm8921-rtc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: rtc
+      - const: alarm
+
+  interrupts:
+    maxItems: 1
+
+  allow-set-time:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the setting of RTC time is allowed by the host CPU.
+
+  nvmem-cells:
+    items:
+      - description:
+          four-byte nvmem cell holding a little-endian offset from the Unix
+          epoch representing the time when the RTC timer was last reset
+
+  nvmem-cell-names:
+    items:
+      - const: offset
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    spmi_bus: spmi@c440000 {
+      reg = <0x0c440000 0x1100>;
+      #address-cells = <2>;
+      #size-cells = <0>;
+      pmicintc: pmic@0 {
+        reg = <0x0 SPMI_USID>;
+        compatible = "qcom,pm8921";
+        interrupts = <104 8>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8921_rtc: rtc@11d {
+          compatible = "qcom,pm8921-rtc";
+          reg = <0x11d>;
+          interrupts = <0x27 0>;
+          nvmem-cells = <&rtc_offset>;
+          nvmem-cell-names = "offset";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt b/Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt
new file mode 100644
index 0000000000..bbf1ccb5df
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/realtek,rtd119x.txt
@@ -0,0 +1,16 @@
+Realtek RTD129x Real-Time Clock
+===============================
+
+Required properties:
+- compatible :  Should be "realtek,rtd1295-rtc"
+- reg        :  Specifies the physical base address and size
+- clocks     :  Specifies the clock gate
+
+
+Example:
+
+	rtc@9801b600 {
+		compatible = "realtek,rtd1295-clk";
+		reg = <0x9801b600 0x100>;
+		clocks = <&clkc RTD1295_CLK_EN_MISC_RTC>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
new file mode 100644
index 0000000000..f6e0c613af
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/renesas,rzn1-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 SoCs Real-Time Clock
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-rtc
+      - const: renesas,rzn1-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: timer
+      - const: pps
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    rtc@40006000 {
+       compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+       reg = <0x40006000 0x1000>;
+       interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+                    <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+                    <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+       interrupt-names = "alarm", "timer", "pps";
+       clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+       clock-names = "hclk";
+       power-domains = <&sysctrl>;
+       start-year = <2000>;
+     };
diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
new file mode 100644
index 0000000000..eff9df4b85
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/renesas,sh-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock for Renesas SH and ARM SoCs
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r7s72100-rtc  # RZ/A1H
+      - const: renesas,sh-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: period
+      - const: carry
+
+  clocks:
+    # The functional clock source for the RTC controller must be listed
+    # first (if it exists). Additionally, potential clock counting sources
+    # are to be listed.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    # The functional clock must be labeled as "fck". Other clocks
+    # may be named in accordance to the SoC hardware manuals.
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ fck, rtc_x1, rtc_x3, extal ]
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc: rtc@fcff1000 {
+        compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+        reg = <0xfcff1000 0x2e>;
+        interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "alarm", "period", "carry";
+        clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+                 <&rtc_x3_clk>, <&extal_clk>;
+        power-domains = <&cpg_clocks>;
+        clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt b/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt
new file mode 100644
index 0000000000..2e956b3dc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-aspeed.txt
@@ -0,0 +1,22 @@
+ASPEED BMC RTC
+==============
+
+Required properties:
+ - compatible: should be one of the following
+   * aspeed,ast2400-rtc for the ast2400
+   * aspeed,ast2500-rtc for the ast2500
+   * aspeed,ast2600-rtc for the ast2600
+
+ - reg: physical base address of the controller and length of memory mapped
+   region
+
+ - interrupts: The interrupt number
+
+Example:
+
+   rtc@1e781000 {
+           compatible = "aspeed,ast2400-rtc";
+           reg = <0x1e781000 0x18>;
+           interrupts = <22>;
+           status = "disabled";
+   };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
new file mode 100644
index 0000000000..7d7b5f6bda
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
@@ -0,0 +1,27 @@
+ Motorola mc146818 compatible RTC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+  - compatible : "motorola,mc146818"
+  - reg : should contain registers location and length.
+
+Optional properties:
+  - interrupts : should contain interrupt.
+  - ctrl-reg : Contains the initial value of the control register also
+    called "Register B".
+  - freq-reg : Contains the initial value of the frequency register also
+    called "Register A".
+
+"Register A" and "B" are usually initialized by the firmware (BIOS for
+instance). If this is not done, it can be performed by the driver.
+
+ISA Example:
+
+	rtc@70 {
+	         compatible = "motorola,mc146818";
+	         interrupts = <8 3>;
+	         interrupt-parent = <&ioapic1>;
+	         ctrl-reg = <2>;
+	         freq-reg = <0x26>;
+	         reg = <1 0x70 2>;
+	 };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml b/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml
new file mode 100644
index 0000000000..98d10e6801
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-ds1307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dallas DS1307 and compatible RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dallas,ds1307
+          - dallas,ds1308
+          - dallas,ds1337
+          - dallas,ds1338
+          - dallas,ds1339
+          - dallas,ds1388
+          - dallas,ds1340
+          - dallas,ds1341
+          - maxim,ds3231
+          - st,m41t0
+          - st,m41t00
+          - st,m41t11
+          - microchip,mcp7940x
+          - microchip,mcp7941x
+          - pericom,pt7c4338
+          - epson,rx8025
+          - isil,isl12057
+          - epson,rx8130
+
+      - items:
+          - enum:
+              - st,m41t00
+          - const: dallas,ds1338
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    description: From common clock binding to override the default output clock name.
+
+  wakeup-source:
+    description: Enables wake up of host system on alarm.
+
+  vcc-supply: true
+
+allOf:
+  - $ref: rtc.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,ds1339
+              - dallas,ds1340
+              - dallas,ds1388
+    then:
+      properties:
+        trickle-resistor-ohms:
+          description: Selected resistor for trickle charger. Should be specified if trickle
+            charger should be enabled.
+          enum: [ 250, 2000, 4000 ]
+
+        trickle-diode-disable:
+          description: Do not use internal trickle charger diode. Should be given if internal
+            trickle charger diode should be disabled (superseded by aux-voltage-chargeable)
+          deprecated: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtc@68 {
+        compatible = "dallas,ds1337";
+        reg = <0x68>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <20 0>;
+        trickle-resistor-ohms = <250>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
new file mode 100644
index 0000000000..fffac74999
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
@@ -0,0 +1,36 @@
+Freescale FlexTimer Module (FTM) Alarm
+
+Required properties:
+- compatible : Should be "fsl,<chip>-ftm-alarm", the
+	       supported chips include
+	       "fsl,ls1012a-ftm-alarm"
+	       "fsl,ls1021a-ftm-alarm"
+	       "fsl,ls1028a-ftm-alarm"
+	       "fsl,ls1043a-ftm-alarm"
+	       "fsl,ls1046a-ftm-alarm"
+	       "fsl,ls1088a-ftm-alarm"
+	       "fsl,ls208xa-ftm-alarm"
+	       "fsl,lx2160a-ftm-alarm"
+- reg : Specifies base physical address and size of the register sets for the
+  FlexTimer Module.
+- interrupts : Should be the FlexTimer Module interrupt.
+- fsl,rcpm-wakeup property and rcpm node : Please refer
+	Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+
+Optional properties:
+- big-endian: If the host controller is big-endian mode, specify this property.
+  The default endian mode is little-endian.
+
+Example:
+rcpm: rcpm@1e34040 {
+	compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+	reg = <0x0 0x1e34040 0x0 0x18>;
+	#fsl,rcpm-wakeup-cells = <6>;
+};
+
+ftm_alarm0: timer@2800000 {
+	compatible = "fsl,ls1088a-ftm-alarm";
+	reg = <0x0 0x2800000 0x0 0x10000>;
+	fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+	interrupts = <0 44 4>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
new file mode 100644
index 0000000000..c33d87e5e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
@@ -0,0 +1,14 @@
+Device-Tree bindings for MediaTek SoC based RTC
+
+Required properties:
+- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
+- reg 		    : Specifies base physical address and size of the registers;
+- interrupts	    : Should contain the interrupt for RTC alarm;
+
+Example:
+
+rtc: rtc@10011000 {
+	compatible = "mediatek,mt2712-rtc";
+	reg = <0 0x10011000 0 0x1000>;
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
new file mode 100644
index 0000000000..7212076a8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -0,0 +1,31 @@
+Device-Tree bindings for MediaTek PMIC based RTC
+
+MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
+as a type of multi-function device (MFD). The RTC can be configured and set up
+with PMIC wrapper bus which is a common resource shared with the other
+functions found on the same PMIC.
+
+For MediaTek PMIC MFD bindings, see:
+../mfd/mt6397.txt
+
+For MediaTek PMIC wrapper bus bindings, see:
+../soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6358-rtc": for MT6358 PMIC
+       "mediatek,mt6366-rtc", "mediatek,mt6358-rtc": for MT6366 PMIC
+       "mediatek,mt6397-rtc": for MT6397 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               rtc {
+                       compatible = "mediatek,mt6323-rtc";
+               };
+       };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
new file mode 100644
index 0000000000..09fe8f5147
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
@@ -0,0 +1,21 @@
+Device-Tree bindings for MediaTek SoC based RTC
+
+Required properties:
+- compatible	    : Should be
+			"mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC
+- reg 		    : Specifies base physical address and size of the registers;
+- interrupts	    : Should contain the interrupt for RTC alarm;
+- clocks	    : Specifies list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : Should contain "rtc" entries
+
+Example:
+
+rtc: rtc@10212800 {
+	compatible = "mediatek,mt7622-rtc",
+		     "mediatek,soc-rtc";
+	reg = <0 0x10212800 0 0x200>;
+	interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&topckgen CLK_TOP_RTC>;
+	clock-names = "rtc";
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml
new file mode 100644
index 0000000000..a14b52178c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-mxc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock of the i.MX SoCs
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Philippe Reynes <tremyfr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx1-rtc
+      - fsl,imx21-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: input reference
+      - description: the SoC RTC clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    rtc@10007000 {
+        compatible = "fsl,imx21-rtc";
+        reg = <0x10007000 0x1000>;
+        interrupts = <22>;
+        clocks = <&clks IMX27_CLK_CKIL>,
+                 <&clks IMX27_CLK_RTC_IPG_GATE>;
+        clock-names = "ref", "ipg";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml
new file mode 100644
index 0000000000..e50131c26d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-mxc_v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX53 Secure Real Time Clock (SRTC)
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Patrick Bruenn <p.bruenn@beckhoff.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx53-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    rtc@53fa4000 {
+        compatible = "fsl,imx53-rtc";
+        reg = <0x53fa4000 0x4000>;
+        interrupts = <24>;
+        clocks = <&clks IMX5_CLK_SRTC_GATE>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
new file mode 100644
index 0000000000..062ebb14ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -0,0 +1,53 @@
+TI Real Time Clock
+
+Required properties:
+- compatible:
+	- "ti,da830-rtc"  - for RTC IP used similar to that on DA8xx SoC family.
+	- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
+			    This RTC IP has special WAKE-EN Register to enable
+			    Wakeup generation for event Alarm. It can also be
+			    used to control an external PMIC via the
+			    pmic_power_en pin.
+	- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
+- reg: Address range of rtc register set
+- interrupts: rtc timer, alarm interrupts in order
+
+Optional properties:
+- system-power-controller: whether the rtc is controlling the system power
+  through pmic_power_en
+- clocks: Any internal or external clocks feeding in to rtc
+- clock-names: Corresponding names of the clocks
+- pinctrl-0: a phandle pointing to the pin settings for the device
+- pinctrl-names: should be "default"
+
+Optional subnodes:
+- generic pinctrl node
+
+Required pinctrl subnodes properties:
+- pins - Names of ext_wakeup pins to configure
+
+Optional pinctrl subnodes properties:
+- input-enable - Enables ext_wakeup
+- ti,active-high - Set input active high (by default active low)
+
+Example:
+
+rtc@1c23000 {
+	compatible = "ti,da830-rtc";
+	reg = <0x23000 0x1000>;
+	interrupts = <19
+		      19>;
+	interrupt-parent = <&intc>;
+	system-power-controller;
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+
+	pinctrl-0 = <&ext_wakeup>;
+	pinctrl-names = "default";
+
+	ext_wakeup: ext-wakeup {
+		pins = "ext_wakeup0";
+		input-enable;
+		ti,active-high;
+	};
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/Documentation/devicetree/bindings/rtc/rtc-opal.txt
new file mode 100644
index 0000000000..2340938cd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-opal.txt
@@ -0,0 +1,17 @@
+IBM OPAL real-time clock
+------------------------
+
+Required properties:
+- compatible: Should be "ibm,opal-rtc"
+
+Optional properties:
+- wakeup-source: Decides if the wakeup is supported or not
+		 (Legacy property supported: "has-tpo")
+
+Example:
+	rtc {
+		compatible = "ibm,opal-rtc";
+		wakeup-source;
+		phandle = <0x10000029>;
+		linux,phandle = <0x10000029>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
new file mode 100644
index 0000000000..c6cf37758a
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
@@ -0,0 +1,32 @@
+Palmas RTC controller bindings
+
+Required properties:
+- compatible:
+  - "ti,palmas-rtc" for palma series of the RTC controller
+- interrupts: Interrupt number of RTC submodule on device.
+
+Optional properties:
+
+- ti,backup-battery-chargeable: The Palmas series device like TPS65913 or
+	TPS80036 supports the backup battery for powering the RTC when main
+	battery is removed or in very low power state. The backup battery
+	can be chargeable or non-chargeable. This flag will tells whether
+	battery is chargeable or not. If charging battery then driver can
+	enable the charging.
+- ti,backup-battery-charge-high-current: Enable high current charging in
+	backup battery. Device supports the < 100uA and > 100uA charging.
+	The high current will be > 100uA. Absence of this property will
+	charge battery to lower current i.e. < 100uA.
+
+Example:
+	palmas: tps65913@58 {
+		...
+		palmas_rtc: rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 0>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
new file mode 100644
index 0000000000..daf88265df
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt
@@ -0,0 +1,28 @@
+STMicroelectronics Low Power Controller (LPC) - RTC
+===================================================
+
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
+
+[See: ../watchdog/st_lpc_wdt.txt for Watchdog options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
+
+Required properties
+
+- compatible 	: Must be: "st,stih407-lpc"
+- reg		: LPC registers base address + size
+- interrupts    : LPC interrupt line number and associated flags
+- clocks	: Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode	: The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
+
+Example:
+	lpc@fde05000 {
+		compatible	= "st,stih407-lpc";
+		reg		= <0xfde05000 0x1000>;
+		clocks 		= <&clk_s_d3_flexgen CLK_LPC_0>;
+		st,lpc-mode	= <ST_LPC_MODE_RTC>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml
new file mode 100644
index 0000000000..efb66df827
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Real Time Clock Common Properties
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  This document describes generic bindings which can be used to
+  describe Real Time Clock devices in a device tree.
+
+properties:
+  $nodename:
+    pattern: "^rtc(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  aux-voltage-chargeable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Tells whether the battery/supercap of the RTC (if any) is
+      chargeable or not:
+      0: not chargeable
+      1: chargeable
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal), expressed in femto
+      Farad (fF). The default value shall be listed (if optional),
+      and likewise all valid values.
+
+  start-year:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      If provided, the default hardware range supported by the RTC is
+      shifted so the first usable year is the specified one.
+
+  trickle-diode-disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Do not use internal trickle charger diode. Should be given if
+      internal trickle charger diode should be disabled.
+    deprecated: true
+
+  trickle-resistor-ohms:
+    description:
+      Selected resistor for trickle charger. Should be given
+      if trickle charger should be enabled.
+
+  trickle-voltage-millivolt:
+    description:
+      Selected voltage for trickle charger. Should be given
+      if trickle charger should be enabled and the trickle voltage is different
+      from the RTC main power supply.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enables wake up of host system on alarm.
+
+  reset-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RTC is able to reset the machine.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
new file mode 100644
index 0000000000..d51b236939
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/s3c-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos Real Time Clock controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,s3c2410-rtc
+          - samsung,s3c2416-rtc
+          - samsung,s3c2443-rtc
+          - samsung,s3c6410-rtc
+      - const: samsung,exynos3250-rtc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Must contain a list of phandle and clock specifier for the rtc
+      clock and in the case of a s3c6410 compatible controller, also
+      a source clock.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description:
+      Must contain "rtc" and for a s3c6410 compatible controller
+      also "rtc_src".
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    description:
+      Two interrupt numbers to the cpu should be specified. First
+      interrupt number is the rtc alarm interrupt and second interrupt number
+      is the rtc tick interrupt. The number of cells representing a interrupt
+      depends on the parent interrupt controller.
+    minItems: 2
+    maxItems: 2
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c6410-rtc
+              - samsung,exynos3250-rtc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: rtc
+            - const: rtc_src
+    else:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: rtc
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/clock/samsung,s2mps11.h>
+
+    rtc@10070000 {
+        compatible = "samsung,s3c6410-rtc";
+        reg = <0x10070000 0x100>;
+        interrupts = <0 44 4>, <0 45 4>;
+        clocks = <&clock CLK_RTC>,
+                 <&s2mps11_osc S2MPS11_CLK_AP>;
+        clock-names = "rtc", "rtc_src";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
new file mode 100644
index 0000000000..a16c355dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sa1100-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Real Time Clock controller
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Alessandro Zummo <a.zummo@towertech.it>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Rob Herring <robh+dt@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - mrvl,sa1100-rtc
+      - mrvl,mmp-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: rtc 1Hz
+      - const: rtc alarm
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc: rtc@d4010000 {
+        compatible = "mrvl,mmp-rtc";
+        reg = <0xd4010000 0x1000>;
+        interrupts = <5>, <6>;
+        interrupt-names = "rtc 1Hz", "rtc alarm";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
new file mode 100644
index 0000000000..fecf8e4ad4
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -0,0 +1,15 @@
+* SPEAr RTC
+
+Required properties:
+- compatible : "st,spear600-rtc"
+- reg : Address range of the rtc registers
+- interrupt: Should contain the rtc interrupt number
+
+Example:
+
+	rtc@fc000000 {
+		compatible = "st,spear600-rtc";
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
new file mode 100644
index 0000000000..1f5754299d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
@@ -0,0 +1,26 @@
+Spreadtrum SC27xx Real Time Clock
+
+Required properties:
+- compatible: should be "sprd,sc2731-rtc".
+- reg: address offset of rtc register.
+- interrupts: rtc alarm interrupt.
+
+Example:
+
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@280 {
+			compatible = "sprd,sc2731-rtc";
+			reg = <0x280>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/rtc/st,m41t80.yaml b/Documentation/devicetree/bindings/rtc/st,m41t80.yaml
new file mode 100644
index 0000000000..fc9c6da648
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/st,m41t80.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,m41t80.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST M41T80 family of RTC and compatible
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - st,m41t62
+      - st,m41t65
+      - st,m41t80
+      - st,m41t81
+      - st,m41t81s
+      - st,m41t82
+      - st,m41t83
+      - st,m41t84
+      - st,m41t85
+      - st,m41t87
+      - microcrystal,rv4162
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 1
+    description: From common clock binding to override the default output clock name.
+
+  clock:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+allOf:
+  - $ref: rtc.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rtc@68 {
+        compatible = "st,m41t80";
+        reg = <0x68>;
+        interrupt-parent = <&UIC0>;
+        interrupts = <0x9 0x8>;
+
+        clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <32768>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/st,m48t86.yaml b/Documentation/devicetree/bindings/rtc/st,m48t86.yaml
new file mode 100644
index 0000000000..e3e12fa233
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/st,m48t86.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,m48t86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST M48T86 / Dallas DS12887 RTC with SRAM
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml
+
+properties:
+  compatible:
+    enum:
+      - st,m48t86
+
+  reg:
+    items:
+      - description: index register
+      - description: data register
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    rtc@10800000 {
+      compatible = "st,m48t86";
+      reg = <0x10800000 0x1>, <0x11700000 0x1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
new file mode 100644
index 0000000000..4703083d1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,stm32-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Real Time Clock
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32-rtc
+      - st,stm32h7-rtc
+      - st,stm32mp1-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: rtc_ck
+
+  interrupts:
+    maxItems: 1
+
+  st,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      minItems: 3
+      maxItems: 3
+    description: |
+      Phandle/offset/mask triplet. The phandle to pwrcfg used to
+      access control register at offset, and change the dbp (Disable Backup
+      Protection) bit represented by the mask, mandatory to disable/enable backup
+      domain (RTC registers) write protection.
+
+  assigned-clocks:
+    description: |
+      override default rtc_ck parent clock reference to the rtc_ck clock entry
+    maxItems: 1
+
+  assigned-clock-parents:
+    description: |
+      override default rtc_ck parent clock phandle of the new parent clock of rtc_ck
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+
+        clock-names: false
+
+      required:
+        - st,syscfg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+
+      required:
+        - clock-names
+        - st,syscfg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+
+        assigned-clocks: false
+        assigned-clock-parents: false
+
+      required:
+        - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    rtc@40002800 {
+      compatible = "st,stm32-rtc";
+      reg = <0x40002800 0x400>;
+      clocks = <&rcc 1 CLK_RTC>;
+      assigned-clocks = <&rcc 1 CLK_RTC>;
+      assigned-clock-parents = <&rcc 1 CLK_LSE>;
+      interrupt-parent = <&exti>;
+      interrupts = <17 1>;
+      st,syscfg = <&pwrcfg 0x00 0x100>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    rtc@5c004000 {
+      compatible = "st,stm32mp1-rtc";
+      reg = <0x5c004000 0x400>;
+      clocks = <&rcc RTCAPB>, <&rcc RTC>;
+      clock-names = "pclk", "rtc_ck";
+      interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
new file mode 100644
index 0000000000..fa6a942266
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
@@ -0,0 +1,21 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Optional properties:
+- stmp,crystal-freq: override crystal frequency as determined from fuse bits.
+  Only <32000> and <32768> are possible for the hardware.  Use <0> for
+  "no crystal".
+
+Example:
+
+rtc@80056000 {
+	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+	reg = <0x80056000 2000>;
+	interrupts = <29>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml b/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml
new file mode 100644
index 0000000000..fd1b3e71ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sunplus,sp7021-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Real Time Clock controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-rtc
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: rtc
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc: serial@9c003a00 {
+        compatible = "sunplus,sp7021-rtc";
+        reg = <0x9c003a00 0x80>;
+        reg-names = "rtc";
+        clocks = <&clkc 0x12>;
+        resets = <&rstc 0x02>;
+        interrupt-parent = <&intc>;
+        interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml
new file mode 100644
index 0000000000..bf9c1c4ddb
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ti,bq32000.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,bq32000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ32000 I2C Serial Real-Time Clock
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: ti,bq32000
+
+  reg:
+    const: 0x68
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+  trickle-resistor-ohms:
+    enum: [ 1120, 20180 ]
+
+  trickle-diode-disable: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            bq32000: rtc@68 {
+                    compatible = "ti,bq32000";
+                    reg = <0x68>;
+                    trickle-resistor-ohms = <1120>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
new file mode 100644
index 0000000000..df5b4f77f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,k3-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Real Time Clock
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  This RTC appears in the AM62x family of SoCs.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am62-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VBUS Interface clock
+      - description: 32k Clock source (external or internal).
+
+  clock-names:
+    items:
+      - const: vbus
+      - const: osc32k
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2b1f0000 {
+        compatible = "ti,am62-rtc";
+        reg = <0x2b1f0000 0x100>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&bar 0>;
+        clocks = <&foo 0>, <&foo 1>;
+        clock-names = "vbus", "osc32k";
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
new file mode 100644
index 0000000000..2a65f31ac5
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/trivial-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trivial RTCs
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  This is a list of trivial RTC devices that have simple device tree
+  bindings, consisting only of a compatible field, an address and
+  possibly an interrupt line.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    enum:
+      # AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface
+      - abracon,abb5zes3
+      # AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface
+      - abracon,abeoz9
+      # I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
+      - dallas,ds1374
+      # Dallas DS1672 Real-time Clock
+      - dallas,ds1672
+      # Extremely Accurate I²C RTC with Integrated Crystal and SRAM
+      - dallas,ds3232
+      # EM Microelectronic EM3027 RTC
+      - emmicro,em3027
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+      - epson,rx8010
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+      - epson,rx8025
+      - epson,rx8035
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
+      - epson,rx8571
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+      - epson,rx8581
+      # Intersil ISL1208 Low Power RTC with Battery Backed SRAM
+      - isil,isl1208
+      # Intersil ISL1218 Low Power RTC with Battery Backed SRAM
+      - isil,isl1218
+      # Real Time Clock Module with I2C-Bus
+      - microcrystal,rv3029
+      # Real Time Clock
+      - microcrystal,rv8523
+      # Real-time Clock Module
+      - pericom,pt7c4338
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - ricoh,r2025sd
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - ricoh,r2221tl
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - ricoh,rs5c372a
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - ricoh,rs5c372b
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - ricoh,rv5c386
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - ricoh,rv5c387a
+      # 2-wire CMOS real-time clock
+      - sii,s35390a
+      # I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+      - whwave,sd3078
+      # Xircom X1205 I2C RTC
+      - xircom,x1205
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  start-year: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/twl-rtc.txt b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
new file mode 100644
index 0000000000..8f9a94f2f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/twl-rtc.txt
@@ -0,0 +1,11 @@
+* Texas Instruments TWL4030/6030 RTC
+
+Required properties:
+- compatible : Should be "ti,twl4030-rtc"
+- interrupts : Should be the interrupt number.
+
+Example:
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
new file mode 100644
index 0000000000..3c0484c495
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Realtime Clock Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-rtc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : alarm interrupt
+
+Example:
+
+	rtc@d8100000 {
+		compatible = "via,vt8500-rtc";
+		reg = <0xd8100000 0x10000>;
+		interrupts = <48>;
+	};
diff --git a/Documentation/devicetree/bindings/rtc/xgene-rtc.txt b/Documentation/devicetree/bindings/rtc/xgene-rtc.txt
new file mode 100644
index 0000000000..fd195c3584
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/xgene-rtc.txt
@@ -0,0 +1,28 @@
+* APM X-Gene Real Time Clock
+
+RTC controller for the APM X-Gene Real Time Clock
+
+Required properties:
+- compatible : Should be "apm,xgene-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+- #clock-cells: Should be 1.
+- clocks: Reference to the clock entry.
+
+Example:
+
+rtcclk: rtcclk {
+	compatible = "fixed-clock";
+	#clock-cells = <1>;
+	clock-frequency = <100000000>;
+	clock-output-names = "rtcclk";
+};
+
+rtc: rtc@10510000 {
+	compatible = "apm,xgene-rtc";
+	reg = <0x0 0x10510000 0x0 0x400>;
+	interrupts = <0x0 0x46 0x4>;
+	#clock-cells = <1>;
+	clocks = <&rtcclk 0>;
+};
diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
new file mode 100644
index 0000000000..d1f5eb996d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/xlnx,zynqmp-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale+ MPSoC Real Time Clock
+
+description:
+  RTC controller for the Xilinx Zynq MPSoC Real Time Clock.
+  The RTC controller has separate IRQ lines for seconds and alarm.
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: sec
+
+  calibration:
+    description: |
+      calibration value for 1 sec period which will
+      be programmed directly to calibration register.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x1
+    maximum: 0x1FFFFF
+    default: 0x198233
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      rtc: rtc@ffa60000 {
+        compatible = "xlnx,zynqmp-rtc";
+        reg = <0x0 0xffa60000 0x0 0x100>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 26 4>, <0 27 4>;
+        interrupt-names = "alarm", "sec";
+        calibration = <0x198233>;
+        clock-names = "rtc";
+        clocks = <&rtc_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
new file mode 100644
index 0000000000..8c6659ed2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -0,0 +1,98 @@
+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+  - compatible : value should be as follows:
+	(a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+	(b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset
+	(c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset
+  - sas-addr : array of 8 bytes for host SAS address
+  - reg : Contains two regions. The first is the address and length of the SAS
+          register. The second is the address and length of CPLD register for
+          SGPIO control. The second is optional, and should be set only when
+          we use a CPLD for directly attached disk LED control.
+  - hisilicon,sas-syscon: phandle of syscon used for sas control
+  - ctrl-reset-reg : offset to controller reset register in ctrl reg
+  - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+  - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+  - queue-count : number of delivery and completion queues in the controller
+  - phy-count : number of phys accessible by the controller
+  - interrupts : For v1 hw: Interrupts for phys, completion queues, and fatal
+		sources; the interrupts are ordered in 3 groups, as follows:
+			- Phy interrupts
+			- Completion queue interrupts
+			- Fatal interrupts
+		Phy interrupts : Each phy has 3 interrupt sources:
+			- broadcast
+			- phyup
+			- abnormal
+		The phy interrupts are ordered into groups of 3 per phy
+		(broadcast, phyup, and abnormal) in increasing order.
+		Completion queue interrupts : each completion queue has 1
+			interrupt source.
+			The interrupts are ordered in increasing order.
+		Fatal interrupts : the fatal interrupts are ordered as follows:
+			- ECC
+			- AXI bus
+		For v2 hw: Interrupts for phys, Sata, and completion queues;
+		the interrupts are ordered in 3 groups, as follows:
+			- Phy interrupts
+			- Sata interrupts
+			- Completion queue interrupts
+		Phy interrupts : Each controller has 2 phy interrupts:
+			- phy up/down
+			- channel interrupt
+		Sata interrupts : Each phy on the controller has 1 Sata
+			interrupt. The interrupts are ordered in increasing
+			order.
+		Completion queue interrupts : each completion queue has 1
+			interrupt source. The interrupts are ordered in
+			increasing order.
+
+Optional main node properties:
+ - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
+			    "am-max-transmissions" limitation.
+ - hisilicon,signal-attenuation : array of 3 32-bit values, containing de-emphasis,
+		preshoot, and boost attenuation readings for the board. They
+		are used to describe the signal attenuation of the board. These
+		values' range is 7600 to 12400, and used to represent -24dB to
+		24dB.
+		The formula is "y = (x-10000)/10000". For example, 10478
+		means 4.78dB.
+
+Example:
+	sas0: sas@c1000000 {
+		compatible = "hisilicon,hip05-sas-v1";
+		sas-addr = [50 01 88 20 16 00 00 0a];
+		reg = <0x0 0xc1000000 0x0 0x10000>;
+		hisilicon,sas-syscon = <&pcie_sas>;
+		ctrl-reset-reg = <0xa60>;
+		ctrl-reset-sts-reg = <0x5a30>;
+		ctrl-clock-ena-reg = <0x338>;
+		queue-count = <32>;
+		phy-count = <8>;
+		dma-coherent;
+		interrupt-parent = <&mbigen_dsa>;
+		interrupts =    <259 4>,<263 4>,<264 4>,/* phy0 */
+				<269 4>,<273 4>,<274 4>,/* phy1 */
+				<279 4>,<283 4>,<284 4>,/* phy2 */
+				<289 4>,<293 4>,<294 4>,/* phy3 */
+				<299 4>,<303 4>,<304 4>,/* phy4 */
+				<309 4>,<313 4>,<314 4>,/* phy5 */
+				<319 4>,<323 4>,<324 4>,/* phy6 */
+				<329 4>,<333 4>,<334 4>,/* phy7 */
+				<336 1>,<337 1>,<338 1>,/* cq0-2 */
+				<339 1>,<340 1>,<341 1>,/* cq3-5 */
+				<342 1>,<343 1>,<344 1>,/* cq6-8 */
+				<345 1>,<346 1>,<347 1>,/* cq9-11 */
+				<348 1>,<349 1>,<350 1>,/* cq12-14 */
+				<351 1>,<352 1>,<353 1>,/* cq15-17 */
+				<354 1>,<355 1>,<356 1>,/* cq18-20 */
+				<357 1>,<358 1>,<359 1>,/* cq21-23 */
+				<360 1>,<361 1>,<362 1>,/* cq24-26 */
+				<363 1>,<364 1>,<365 1>,/* cq27-29 */
+				<366 1>,<367 1>/* cq30-31 */
+				<376 4>,/* fatal ecc */
+				<381 4>;/* fatal axi */
+	};
diff --git a/Documentation/devicetree/bindings/security/tpm/google,cr50.txt b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt
new file mode 100644
index 0000000000..cd69c2efdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt
@@ -0,0 +1,19 @@
+* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus.
+
+H1 Secure Microcontroller running Cr50 firmware provides several
+functions, including TPM-like functionality. It communicates over
+SPI using the FIFO protocol described in the PTP Spec, section 6.
+
+Required properties:
+- compatible: Should be "google,cr50".
+- spi-max-frequency: Maximum SPI frequency.
+
+Example:
+
+&spi0 {
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		spi-max-frequency = <800000>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt
new file mode 100644
index 0000000000..d89f999713
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt
@@ -0,0 +1,41 @@
+* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm)
+
+Required properties:
+
+- compatible            : property name that conveys the platform architecture
+                          identifiers, as 'IBM,vtpm'
+- device_type           : specifies type of virtual device
+- interrupts            : property specifying the interrupt source number and
+                          sense code associated with this virtual I/O Adapters
+- ibm,my-drc-index      : integer index for the connector between the device
+                          and its parent - present only if Dynamic
+                          Reconfiguration(DR) Connector is enabled
+- ibm,#dma-address-cells: specifies the number of cells that are used to
+                          encode the physical address field of dma-window
+                          properties
+- ibm,#dma-size-cells   : specifies the number of cells that are used to
+                          encode the size field of dma-window properties
+- ibm,my-dma-window     : specifies DMA window associated with this virtual
+                          IOA
+- ibm,loc-code          : specifies the unique and persistent location code
+                          associated with this virtual I/O Adapters
+- linux,sml-base        : 64-bit base address of the reserved memory allocated
+                          for the firmware event log
+- linux,sml-size        : size of the memory allocated for the firmware event log
+
+Example (IBM Virtual Trusted Platform Module)
+---------------------------------------------
+
+                vtpm@30000003 {
+                        ibm,#dma-size-cells = <0x2>;
+                        compatible = "IBM,vtpm";
+                        device_type = "IBM,vtpm";
+                        ibm,my-drc-index = <0x30000003>;
+                        ibm,#dma-address-cells = <0x2>;
+                        linux,sml-base = <0xc60e 0x0>;
+                        interrupts = <0xa0003 0x0>;
+                        ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>;
+                        ibm,loc-code = "U8286.41A.10082DV-V3-C3";
+                        reg = <0x30000003>;
+                        linux,sml-size = <0xbce10200>;
+                };
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
new file mode 100644
index 0000000000..0dc121b6ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt
@@ -0,0 +1,34 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+
+Optional ST33ZP24 Properties:
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
+
+&i2c2 {
+
+
+        st33zp24: st33zp24@13 {
+
+                compatible = "st,st33zp24-i2c";
+
+                reg = <0x13>;
+                clock-frequency = <400000>;
+
+                interrupt-parent = <&gpio5>;
+                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
new file mode 100644
index 0000000000..37198971f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt
@@ -0,0 +1,32 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-spi".
+- spi-max-frequency: Maximum SPI frequency (<= 10000000).
+
+Optional ST33ZP24 Properties:
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4):
+
+&mcspi4 {
+
+
+        st33zp24@0 {
+
+                compatible = "st,st33zp24-spi";
+
+                spi-max-frequency = <10000000>;
+
+                interrupt-parent = <&gpio5>;
+                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
new file mode 100644
index 0000000000..a65d7b71e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt
@@ -0,0 +1,26 @@
+* Device Tree Bindings for I2C based Trusted Platform Module(TPM)
+
+Required properties:
+
+- compatible     : 'manufacturer,model', eg. nuvoton,npct650
+- label          : human readable string describing the device, eg. "tpm"
+- linux,sml-base : 64-bit base address of the reserved memory allocated for
+                   the firmware event log
+- linux,sml-size : size of the memory allocated for the firmware event log
+
+Optional properties:
+
+- powered-while-suspended: present when the TPM is left powered on between
+                           suspend and resume (makes the suspend/resume
+                           callbacks do nothing).
+
+Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C)
+----------------------------------------------------------
+
+tpm@57 {
+	reg = <0x57>;
+	label = "tpm";
+	compatible = "nuvoton,npct650", "nuvoton,npct601";
+	linux,sml-base = <0x7f 0xfd450000>;
+	linux,sml-size = <0x10000>;
+};
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
new file mode 100644
index 0000000000..7c6304426d
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt
@@ -0,0 +1,25 @@
+Trusted Computing Group MMIO Trusted Platform Module
+
+The TCG defines multi vendor standard for accessing a TPM chip, this
+is the standard protocol defined to access the TPM via MMIO. Typically
+this interface will be implemented over Intel's LPC bus.
+
+Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG
+publication for the specification.
+
+Required properties:
+
+- compatible: should contain a string below for the chip, followed by
+              "tcg,tpm-tis-mmio". Valid chip strings are:
+	          * "atmel,at97sc3204"
+- reg: The location of the MMIO registers, should be at least 0x5000 bytes
+- interrupts: An optional interrupt indicating command completion.
+
+Example:
+
+	tpm_tis@90000 {
+				compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio";
+				reg = <0x90000 0x5000>;
+				interrupt-parent = <&EIC0>;
+				interrupts = <1 2>;
+	};
diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
new file mode 100644
index 0000000000..b800667da9
--- /dev/null
+++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt
@@ -0,0 +1,23 @@
+Required properties:
+- compatible: should be one of the following
+    "st,st33htpm-spi"
+    "infineon,slb9670"
+    "tcg,tpm_tis-spi"
+- spi-max-frequency: Maximum SPI frequency (depends on TPMs).
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4):
+
+&mcspi4 {
+
+
+        tpm_tis@0 {
+
+                compatible = "tcg,tpm_tis-spi";
+
+                spi-max-frequency = <10000000>;
+        };
+};
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
new file mode 100644
index 0000000000..692aa05500
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -0,0 +1,264 @@
+# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART (Universal Asynchronous Receiver/Transmitter)
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+allOf:
+  - $ref: serial.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+  - if:
+      anyOf:
+        - required:
+            - aspeed,lpc-io-reg
+        - required:
+            - aspeed,lpc-interrupts
+        - required:
+            - aspeed,sirq-polarity-sense
+    then:
+      properties:
+        compatible:
+          const: aspeed,ast2500-vuart
+  - if:
+      properties:
+        compatible:
+          const: mrvl,mmp-uart
+    then:
+      properties:
+        reg-shift:
+          const: 2
+      required:
+        - reg-shift
+  - if:
+      not:
+        properties:
+          compatible:
+            items:
+              - enum:
+                  - ns8250
+                  - ns16450
+                  - ns16550
+                  - ns16550a
+    then:
+      anyOf:
+        - required: [ clock-frequency ]
+        - required: [ clocks ]
+
+properties:
+  compatible:
+    oneOf:
+      - const: ns8250
+      - const: ns16450
+      - const: ns16550
+      - const: ns16550a
+      - const: ns16850
+      - const: aspeed,ast2400-vuart
+      - const: aspeed,ast2500-vuart
+      - const: intel,xscale-uart
+      - const: mrvl,pxa-uart
+      - const: nuvoton,wpcm450-uart
+      - const: nuvoton,npcm750-uart
+      - const: nvidia,tegra20-uart
+      - const: nxp,lpc3220-uart
+      - items:
+          - enum:
+              - exar,xr16l2552
+              - exar,xr16l2551
+              - exar,xr16l2550
+          - const: ns8250
+      - items:
+          - enum:
+              - altr,16550-FIFO32
+              - altr,16550-FIFO64
+              - altr,16550-FIFO128
+              - fsl,16550-FIFO64
+              - fsl,ns16550
+              - andestech,uart16550
+              - nxp,lpc1850-uart
+              - opencores,uart16550-rtlsvn105
+              - ti,da830-uart
+          - const: ns16550a
+      - items:
+          - enum:
+              - ns16750
+              - cavium,octeon-3860-uart
+              - xlnx,xps-uart16550-2.00.b
+              - ralink,rt2880-uart
+          - enum:
+              - ns16550 # Deprecated, unless the FIFO really is broken
+              - ns16550a
+      - items:
+          - enum:
+              - nuvoton,npcm845-uart
+          - const: nuvoton,npcm750-uart
+      - items:
+          - enum:
+              - ralink,mt7620a-uart
+              - ralink,rt3052-uart
+              - ralink,rt3883-uart
+          - const: ralink,rt2880-uart
+          - enum:
+              - ns16550 # Deprecated, unless the FIFO really is broken
+              - ns16550a
+      - items:
+          - enum:
+              - mediatek,mt7622-btif
+              - mediatek,mt7623-btif
+          - const: mediatek,mtk-btif
+      - items:
+          - const: mrvl,mmp-uart
+          - const: intel,xscale-uart
+      - items:
+          - enum:
+              - nvidia,tegra30-uart
+              - nvidia,tegra114-uart
+              - nvidia,tegra124-uart
+              - nvidia,tegra210-uart
+              - nvidia,tegra186-uart
+              - nvidia,tegra194-uart
+              - nvidia,tegra234-uart
+          - const: nvidia,tegra20-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency: true
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  current-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The current active speed of the UART.
+
+  reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Offset to apply to the mapbase from the start of the registers.
+
+  reg-shift:
+    description: Quantity to shift the register offsets by.
+
+  reg-io-width:
+    description: |
+      The size (in bytes) of the IO accesses that should be performed on the
+      device. There are some systems that require 32-bit accesses to the
+      UART (e.g. TI davinci).
+
+  used-by-rtas:
+    type: boolean
+    description: |
+      Set to indicate that the port is in use by the OpenFirmware RTAS and
+      should not be registered.
+
+  no-loopback-test:
+    type: boolean
+    description: |
+      Set to indicate that the port does not implement loopback test mode.
+
+  fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The fifo size of the UART.
+
+  auto-flow-control:
+    type: boolean
+    description: |
+      One way to enable automatic flow control support. The driver is
+      allowed to detect support for the capability even without this
+      property.
+
+  tx-threshold:
+    description: |
+      Specify the TX FIFO low water indication for parts with programmable
+      TX FIFO thresholds.
+
+  overrun-throttle-ms:
+    description: |
+      How long to pause uart rx when input overrun is encountered.
+
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+
+  aspeed,sirq-polarity-sense:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Phandle to aspeed,ast2500-scu compatible syscon alongside register
+      offset and bit number to identify how the SIRQ polarity should be
+      configured. One possible data source is the LPC/eSPI mode bit. Only
+      applicable to aspeed,ast2500-vuart.
+    deprecated: true
+
+  aspeed,lpc-io-reg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 1
+    description: |
+      The VUART LPC address.  Only applicable to aspeed,ast2500-vuart.
+
+  aspeed,lpc-interrupts:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      A 2-cell property describing the VUART SIRQ number and SIRQ
+      polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH).  Only
+      applicable to aspeed,ast2500-vuart.
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@80230000 {
+        compatible = "ns8250";
+        reg = <0x80230000 0x100>;
+        interrupts = <10>;
+        reg-shift = <2>;
+        clock-frequency = <48000000>;
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial@49042000 {
+        compatible = "andestech,uart16550", "ns16550a";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        clock-frequency = <48000000>;
+        cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+        rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+        dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+        dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+        rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+    };
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    serial@1e787000 {
+        compatible = "aspeed,ast2500-vuart";
+        reg = <0x1e787000 0x40>;
+        reg-shift = <2>;
+        interrupts = <8>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        no-loopback-test;
+        aspeed,lpc-io-reg = <0x3f8>;
+        aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
new file mode 100644
index 0000000000..6a7be42da5
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250_omap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+  - $ref: /schemas/serial/rs485.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,am3352-uart
+          - ti,am4372-uart
+          - ti,am654-uart
+          - ti,dra742-uart
+          - ti,omap2-uart
+          - ti,omap3-uart
+          - ti,omap4-uart
+      - items:
+          - enum:
+              - ti,am64-uart
+              - ti,j721e-uart
+          - const: ti,am654-uart
+
+  ti,hwmods:
+    description:
+      Must be "uart<n>", n being the instance number (1-based)
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description:
+      First entry is module IRQ required for normal IO operation.
+      Second entry is optional and corresponds to system wakeup IRQ
+      where supported.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fclk
+
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+  rs485-rts-active-high: true
+  rts-gpio: true
+  power-domains: true
+  clock-frequency: true
+  current-speed: true
+  overrun-throttle-ms: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ti,omap2-uart
+          - ti,omap3-uart
+          - ti,omap4-uart
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^uart([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+    serial@49042000 {
+        compatible = "ti,omap3-uart";
+        reg = <0x49042000 0x400>;
+        interrupts = <80>;
+        dmas = <&sdma 81 &sdma 82>;
+        dma-names = "tx", "rx";
+        ti,hwmods = "uart4";
+        clock-frequency = <48000000>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
new file mode 100644
index 0000000000..aa873eada0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
@@ -0,0 +1,16 @@
+Actions Semi Owl UART
+
+Required properties:
+- compatible :  "actions,s500-uart", "actions,owl-uart" for S500
+                "actions,s900-uart", "actions,owl-uart" for S900
+- reg        :  Offset and length of the register set for the device.
+- interrupts :  Should contain UART interrupt.
+
+
+Example:
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
diff --git a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
new file mode 100644
index 0000000000..55a901051e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
@@ -0,0 +1,5 @@
+Altera JTAG UART
+
+Required properties:
+- compatible : should be "ALTR,juart-1.0" <DEPRECATED>
+- compatible : should be "altr,juart-1.0"
diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt
new file mode 100644
index 0000000000..81bf7ffb1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/altera_uart.txt
@@ -0,0 +1,8 @@
+Altera UART
+
+Required properties:
+- compatible : should be "ALTR,uart-1.0" <DEPRECATED>
+- compatible : should be "altr,uart-1.0"
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
new file mode 100644
index 0000000000..2e189e5483
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SoC UART Serial Interface
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic Meson SoC UART Serial Interface is present on a large range
+  of SoCs, and can be present either in the "Always-On" power domain or the
+  "Everything-Else" power domain.
+
+  The particularity of the "Always-On" Serial Interface is that the hardware
+  is active since power-on and does not need any clock gating and is usable
+  as very early serial console.
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Always-on power domain UART controller
+        items:
+          - enum:
+              - amlogic,meson6-uart
+              - amlogic,meson8-uart
+              - amlogic,meson8b-uart
+              - amlogic,meson-gx-uart
+              - amlogic,meson-s4-uart
+              - amlogic,meson-a1-uart
+          - const: amlogic,meson-ao-uart
+      - description: Always-on power domain UART controller on G12A SoCs
+        items:
+          - const: amlogic,meson-g12a-uart
+          - const: amlogic,meson-gx-uart
+          - const: amlogic,meson-ao-uart
+      - description: Everything-Else power domain UART controller
+        enum:
+          - amlogic,meson6-uart
+          - amlogic,meson8-uart
+          - amlogic,meson8b-uart
+          - amlogic,meson-gx-uart
+          - amlogic,meson-s4-uart
+          - amlogic,meson-a1-uart
+      - description: Everything-Else power domain UART controller on G12A SoCs
+        items:
+          - const: amlogic,meson-g12a-uart
+          - const: amlogic,meson-gx-uart
+      - description: UART controller on S4 compatible SoCs
+        items:
+          - const: amlogic,t7-uart
+          - const: amlogic,meson-s4-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: external xtal clock identifier
+      - description: the bus core clock, either the clk81 clock or the gate clock
+      - description: the source of the baudrate generator, can be either the xtal or the pclk
+
+  clock-names:
+    items:
+      - const: xtal
+      - const: pclk
+      - const: baud
+
+  fifo-size:
+    description: The fifo size supported by the UART channel.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [64, 128]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@84c0 {
+        compatible = "amlogic,meson-gx-uart";
+        reg = <0x84c0 0x14>;
+        interrupts = <26>;
+        clocks = <&xtal>, <&pclk>, <&xtal>;
+        clock-names = "xtal", "pclk", "baud";
+    };
diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt
new file mode 100644
index 0000000000..256cc150ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arc-uart.txt
@@ -0,0 +1,25 @@
+* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards
+
+Required properties:
+- compatible		: "snps,arc-uart"
+- reg			: offset and length of the register set for the device.
+- interrupts		: device interrupt
+- clock-frequency	: the input clock frequency for the UART
+- current-speed		: baud rate for UART
+
+e.g.
+
+arcuart0: serial@c0fc1000 {
+	compatible = "snps,arc-uart";
+	reg = <0xc0fc1000 0x100>;
+	interrupts = <5>;
+	clock-frequency = <80000000>;
+	current-speed = <115200>;
+};
+
+Note: Each port should have an alias correctly numbered in "aliases" node.
+
+e.g.
+aliases {
+	serial0 = &arcuart0;
+};
diff --git a/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
new file mode 100644
index 0000000000..128cc6aed0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
@@ -0,0 +1,19 @@
+ARM MPS2 UART
+
+Required properties:
+- compatible	: Should be "arm,mps2-uart"
+- reg		: Address and length of the register set
+- interrupts	: Reference to the UART RX, TX and overrun interrupts
+
+Required clocking property:
+- clocks	  : The input clock of the UART
+
+
+Examples:
+
+uart0: serial@40004000 {
+	compatible = "arm,mps2-uart";
+	reg = <0x40004000 0x1000>;
+	interrupts = <0 1 12>;
+	clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
new file mode 100644
index 0000000000..4163e7eb77
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
@@ -0,0 +1,10 @@
+* ARM SBSA defined generic UART
+This UART uses a subset of the PL011 registers and consequently lives
+in the PL011 driver. It's baudrate and other communication parameters
+cannot be adjusted at runtime, so it lacks a clock specifier here.
+
+Required properties:
+- compatible: must be "arm,sbsa-uart"
+- reg: exactly one register range
+- interrupts: exactly one interrupt specifier
+- current-speed: the (fixed) baud rate set by the firmware
diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
new file mode 100644
index 0000000000..65cb2e5c5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+maintainers:
+  - Richard Genoud <richard.genoud@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91rm9200-usart
+          - atmel,at91sam9260-usart
+      - items:
+          - const: atmel,at91rm9200-dbgu
+          - const: atmel,at91rm9200-usart
+      - items:
+          - const: atmel,at91sam9260-dbgu
+          - const: atmel,at91sam9260-usart
+      - items:
+          - const: microchip,sam9x60-usart
+          - const: atmel,at91sam9260-usart
+      - items:
+          - const: microchip,sam9x60-dbgu
+          - const: microchip,sam9x60-usart
+          - const: atmel,at91sam9260-dbgu
+          - const: atmel,at91sam9260-usart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: usart
+      - const: gclk
+
+  clocks:
+    minItems: 1
+    items:
+      - description: USART Peripheral Clock
+      - description: USART Generic Clock
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,usart-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Must be either <AT91_USART_MODE_SPI> for SPI or
+      <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
+    enum: [ 0, 1 ]
+
+  atmel,use-dma-rx:
+    type: boolean
+    description: use of PDC or DMA for receiving data
+
+  atmel,use-dma-tx:
+    type: boolean
+    description: use of PDC or DMA for transmitting data
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum number of data the RX and TX FIFOs can store for FIFO
+      capable USARTS.
+    enum: [ 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - atmel,usart-mode
+
+allOf:
+  - if:
+      properties:
+        atmel,usart-mode:
+          const: 1
+    then:
+      allOf:
+        - $ref: /schemas/spi/spi-controller.yaml#
+
+      properties:
+        atmel,use-dma-rx: false
+
+        atmel,use-dma-tx: false
+
+        atmel,fifo-size: false
+
+        "#size-cells":
+          const: 0
+
+        "#address-cells":
+          const: 1
+
+      required:
+        - "#size-cells"
+        - "#address-cells"
+
+    else:
+      allOf:
+        - $ref: /schemas/serial/serial.yaml#
+        - $ref: /schemas/serial/rs485.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* use PDC */
+    usart0: serial@fff8c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xfff8c000 0x4000>;
+        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+        interrupts = <7>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        atmel,use-dma-rx;
+        atmel,use-dma-tx;
+        rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+        cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+        dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+        dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+        dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+        rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* use DMA */
+    usart1: serial@f001c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xf001c000 0x100>;
+        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        atmel,use-dma-rx;
+        atmel,use-dma-tx;
+        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+        dma-names = "tx", "rx";
+        atmel,fifo-size = <32>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* SPI mode */
+    spi0: spi@f001c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xf001c000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,usart-mode = <AT91_USART_MODE_SPI>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+        dma-names = "tx", "rx";
+        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
new file mode 100644
index 0000000000..b5cc6297cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
@@ -0,0 +1,18 @@
+* BCM2835 AUXILIAR UART
+
+Required properties:
+
+- compatible: "brcm,bcm2835-aux-uart"
+- reg: The base address of the UART register bank.
+- interrupts: A single interrupt specifier.
+- clocks: Clock driving the hardware; used to figure out the baud rate
+  divisor.
+
+Example:
+
+	uart1: serial@7e215040 {
+		compatible = "brcm,bcm2835-aux-uart";
+		reg = <0x7e215040 0x40>;
+		interrupts = <1 29>;
+		clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
new file mode 100644
index 0000000000..a22285c43f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx UART
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm6345-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    serial@14e00520 {
+        compatible = "brcm,bcm6345-uart";
+        reg = <0x14e00520 0x18>;
+        interrupt-parent = <&periph_intc>;
+        interrupts = <2>;
+        clocks = <&periph_clk>;
+        clock-names = "refclk";
+    };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
new file mode 100644
index 0000000000..89c462653e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom 8250 based serial port
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+description: |+
+  The Broadcom UART is based on the basic 8250 UART but with
+  enhancements for more accurate high speed baud rates and support
+  for DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7271-uart
+          - brcm,bcm7278-uart
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    description: The UART register block and optionally the DMA register blocks.
+    oneOf:
+      - items:
+          - const: uart
+      - items:
+          - const: uart
+          - const: dma_arb
+          - const: dma_rx
+          - const: dma_tx
+          - const: dma_intr2
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: sw_baud
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: The UART interrupt and optionally the DMA interrupt.
+    minItems: 1
+    items:
+      - const: uart
+      - const: dma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@840d000 {
+        compatible = "brcm,bcm7271-uart";
+        reg = <0x840d000 0x20>;
+        reg-names = "uart";
+        interrupts = <0x0 0x62 0x4>;
+        interrupt-names = "uart";
+        clocks = <&scmi_clk 190>;
+        clock-names = "sw_baud";
+    };
+
+    serial@840e000 {
+        compatible = "brcm,bcm7271-uart";
+        reg = <0x840e000 0x20>,
+              <0x840e080 0x8>,
+              <0x840e100 0xa8>,
+              <0x840e200 0x4c>,
+              <0x840e300 0x30>;
+        reg-names = "uart", "dma_arb", "dma_rx", "dma_tx", "dma_intr2";
+        interrupts = <0x0 0x62 0x4>, <0x0 0x75 0x4>;
+        interrupt-names = "uart", "dma";
+        clocks = <&scmi_clk 190>;
+        clock-names = "sw_baud";
+    };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
new file mode 100644
index 0000000000..e35ad1109e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/cdns,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence UART Controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: UART controller for Zynq-7xxx SoC
+        items:
+          - const: xlnx,xuartps
+          - const: cdns,uart-r1p8
+      - description: UART controller for Zynq Ultrascale+ MPSoC
+        items:
+          - const: xlnx,zynqmp-uart
+          - const: cdns,uart-r1p12
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: uart_clk
+      - const: pclk
+
+  cts-override:
+    description: |
+      Override the CTS modem status signal. This signal will
+      always be reported as active instead of being obtained
+      from the modem status register. Define this if your serial
+      port does not use this pin.
+    type: boolean
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cdns,uart-r1p8
+    then:
+      properties:
+        power-domains: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    uart0: serial@e0000000 {
+        compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+        clocks = <&clkc 23>, <&clkc 40>;
+        clock-names = "uart_clk", "pclk";
+        reg = <0xe0000000 0x1000>;
+        interrupts = <0 27 4>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
new file mode 100644
index 0000000000..07013fa60a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -0,0 +1,31 @@
+* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible: Should be "cirrus,ep7209-uart".
+- reg: Address and length of the register set for the device.
+- interrupts: Should contain UART TX and RX interrupt.
+- clocks: Should contain UART core clock number.
+- syscon: Phandle to SYSCON node, which contain UART control bits.
+
+Optional properties:
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
+  line respectively.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+	aliases {
+		serial0 = &uart1;
+	};
+
+	uart1: uart@80000480 {
+		compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
+		reg = <0x80000480 0x80>;
+		interrupts = <12 13>;
+		clocks = <&clks 11>;
+		syscon = <&syscon1>;
+		cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+		dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+		dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
new file mode 100644
index 0000000000..2d3ede6688
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
@@ -0,0 +1,27 @@
+Binding for Conexant Digicolor USART
+
+Note: this binding is only applicable for using the USART peripheral as
+UART. USART also support synchronous serial protocols like SPI and I2S. Use
+the binding that matches the wiring of your system.
+
+Required properties:
+- compatible : should be "cnxt,cx92755-usart".
+- reg: Should contain USART controller registers location and length.
+- interrupts: Should contain a single USART controller interrupt.
+- clocks: Must contain phandles to the USART clock
+  See ../clocks/clock-bindings.txt for details.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+	aliases {
+		serial0 = &uart0;
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
new file mode 100644
index 0000000000..920539926d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LINFlexD UART
+
+description: |
+  The LINFlexD controller implements several LIN protocol versions, as well
+  as support for full-duplex UART communication through 8-bit and 9-bit
+  frames. See chapter 47 ("LINFlexD") in the reference manual
+  https://www.nxp.com/webapp/Download?colCode=S32V234RM.
+
+maintainers:
+  - Chester Lin <clin@suse.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,s32v234-linflexuart
+      - items:
+          - const: nxp,s32g2-linflexuart
+          - const: fsl,s32v234-linflexuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@40053000 {
+        compatible = "fsl,s32v234-linflexuart";
+        reg = <0x40053000 0x1000>;
+        interrupts = <0 59 4>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
new file mode 100644
index 0000000000..40414247d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+  - $ref: rs485.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-uart
+      - const: fsl,imx21-uart
+      - items:
+          - enum:
+              - fsl,imx25-uart
+              - fsl,imx27-uart
+              - fsl,imx31-uart
+              - fsl,imx35-uart
+              - fsl,imx50-uart
+              - fsl,imx51-uart
+              - fsl,imx53-uart
+              - fsl,imx6q-uart
+          - const: fsl,imx21-uart
+      - items:
+          - enum:
+              - fsl,imx6sl-uart
+              - fsl,imx6sll-uart
+              - fsl,imx6sx-uart
+          - const: fsl,imx6q-uart
+          - const: fsl,imx21-uart
+      - items:
+          - enum:
+              - fsl,imx6ul-uart
+              - fsl,imx7d-uart
+              - fsl,imx8mm-uart
+              - fsl,imx8mn-uart
+              - fsl,imx8mp-uart
+              - fsl,imx8mq-uart
+          - const: fsl,imx6q-uart
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  interrupts:
+    maxItems: 1
+
+  fsl,dte-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate the uart works in DTE mode. The uart works in DCE mode by default.
+
+  fsl,inverted-tx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate that the hardware attached to the peripheral inverts the signal
+      transmitted, and that the peripheral should invert its output using the
+      INVT registers.
+
+  fsl,inverted-rx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate that the hardware attached to the peripheral inverts the signal
+      received, and that the peripheral should invert its input using the
+      INVR registers.
+
+  fsl,dma-info:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      First cell contains the size of DMA buffer chunks, second cell contains
+      the amount of chunks used for the device. Multiplying both numbers is
+      the total size of memory used for receiving data.
+      When not being configured the system will use default settings, which
+      are sensible for most use cases. If you need low latency processing on
+      slow connections this needs to be configured appropriately.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    aliases {
+        serial0 = &uart1;
+    };
+
+    uart1: serial@73fbc000 {
+        compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+        reg = <0x73fbc000 0x4000>;
+        interrupts = <31>;
+        clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+                 <&clks IMX5_CLK_UART1_PER_GATE>;
+        clock-names = "ipg", "per";
+        dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+        dma-names = "rx", "tx";
+        uart-has-rtscts;
+        fsl,dte-mode;
+    };
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
new file mode 100644
index 0000000000..3a5b59f5d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale low power universal asynchronous receiver/transmitter (lpuart)
+
+maintainers:
+  - Fugang Duan <fugang.duan@nxp.com>
+
+allOf:
+  - $ref: rs485.yaml#
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-lpuart
+          - fsl,ls1021a-lpuart
+          - fsl,ls1028a-lpuart
+          - fsl,imx7ulp-lpuart
+          - fsl,imx8qxp-lpuart
+          - fsl,imxrt1050-lpuart
+      - items:
+          - enum:
+              - fsl,imx8ulp-lpuart
+          - const: fsl,imx7ulp-lpuart
+      - items:
+          - enum:
+              - fsl,imx93-lpuart
+          - const: fsl,imx8ulp-lpuart
+          - const: fsl,imx7ulp-lpuart
+      - items:
+          - enum:
+              - fsl,imx8qm-lpuart
+              - fsl,imx8dxl-lpuart
+          - const: fsl,imx8qxp-lpuart
+      - items:
+          - const: fsl,imxrt1050-lpuart
+          - const: fsl,imxrt1170-lpuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ipg clock
+      - description: baud clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: baud
+    minItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    serial@40027000 {
+        compatible = "fsl,vf610-lpuart";
+        reg = <0x40027000 0x1000>;
+        interrupts = <0 61 0x00>;
+        clocks = <&clks VF610_CLK_UART0>;
+        clock-names = "ipg";
+        dmas = <&edma0 0 2>, <&edma0 0 3>;
+        dma-names = "rx","tx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
new file mode 100644
index 0000000000..6a400a5e6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Application UART (AUART)
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-auart
+      - fsl,imx28-auart
+      - alphascale,asm9260-auart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    items:
+      - description: mod clock
+      - description: ahb clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: mod
+      - const: ahb
+    minItems: 1
+
+  uart-has-rtscts: true
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - alphascale,asm9260-auart
+then:
+  required:
+    - clocks
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &auart0;
+    };
+
+    auart0: serial@8006a000 {
+        compatible = "fsl,imx28-auart";
+        reg = <0x8006a000 0x2000>;
+        interrupts = <112>;
+        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+        dma-names = "rx", "tx";
+        clocks = <&clks 45>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
new file mode 100644
index 0000000000..d5f153bdeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/ingenic,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs UART controller
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  $nodename:
+    pattern: "^serial@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-uart
+          - ingenic,jz4750-uart
+          - ingenic,jz4760-uart
+          - ingenic,jz4780-uart
+          - ingenic,x1000-uart
+      - items:
+          - enum:
+              - ingenic,jz4770-uart
+              - ingenic,jz4775-uart
+          - const: ingenic,jz4760-uart
+      - items:
+          - const: ingenic,jz4725b-uart
+          - const: ingenic,jz4740-uart
+      - items:
+          - const: ingenic,jz4755-uart
+          - const: ingenic,jz4750-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Baud clock
+      - description: UART module clock
+
+  clock-names:
+    items:
+      - const: baud
+      - const: module
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    #include <dt-bindings/gpio/gpio.h>
+    serial@10032000 {
+      compatible = "ingenic,jz4780-uart";
+      reg = <0x10032000 0x100>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <49>;
+
+      clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+      clock-names = "baud", "module";
+
+      dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>,
+             <&dma JZ4780_DMA_UART2_TX 0xffffffff>;
+      dma-names = "rx", "tx";
+
+      bluetooth {
+        compatible = "brcm,bcm4330-bt";
+        reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+        vbat-supply = <&wlan0_power>;
+        device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+        host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+        shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
new file mode 100644
index 0000000000..40e81a5818
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -0,0 +1,31 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+  depends on the interrupt-parent interrupt controller.
+
+Optional properties:
+- clocks: Should contain frequency clock and gate clock
+- clock-names: Should be "freq" and "asc"
+
+Example:
+
+asc0: serial@16600000 {
+	compatible = "lantiq,asc";
+	reg = <0x16600000 0x100000>;
+	interrupt-parent = <&gic>;
+	interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+	clock-names = "freq", "asc";
+};
+
+asc1: serial@e100c00 {
+	compatible = "lantiq,asc";
+	reg = <0xE100C00 0x400>;
+	interrupt-parent = <&icu0>;
+	interrupts = <112 113 114>;
+};
diff --git a/Documentation/devicetree/bindings/serial/litex,liteuart.yaml b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
new file mode 100644
index 0000000000..c4f1f489dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/litex,liteuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteUART serial controller
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+description: |
+  LiteUART serial controller is a part of the LiteX FPGA SoC builder. It supports
+  multiple CPU architectures, currently including e.g. OpenRISC and RISC-V.
+
+properties:
+  compatible:
+    const: litex,liteuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    uart0: serial@e0001800 {
+      compatible = "litex,liteuart";
+      reg = <0xe0001800 0x100>;
+      interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
new file mode 100644
index 0000000000..79e10a05a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -0,0 +1,48 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "maxim,max3107" for Maxim MAX3107,
+  - "maxim,max3108" for Maxim MAX3108,
+  - "maxim,max3109" for Maxim MAX3109,
+  - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+  "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+
+/ {
+	clocks {
+		spi_uart_clk: osc_max14830 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3686400>;
+		};
+
+	};
+};
+
+&spi0 {
+	max14830: max14830@0 {
+		compatible = "maxim,max14830";
+		reg = <0>;
+		clocks = <&spi_uart_clk>;
+		clock-names = "osc";
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
new file mode 100644
index 0000000000..303d02ca4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+description: |
+  The MediaTek UART is based on the basic 8250 UART and compatible
+  with 16550A, with enhancements for high speed baud rates and
+  support for DMA.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-uart
+      - items:
+          - enum:
+              - mediatek,mt2701-uart
+              - mediatek,mt2712-uart
+              - mediatek,mt6580-uart
+              - mediatek,mt6582-uart
+              - mediatek,mt6589-uart
+              - mediatek,mt6755-uart
+              - mediatek,mt6765-uart
+              - mediatek,mt6779-uart
+              - mediatek,mt6795-uart
+              - mediatek,mt6797-uart
+              - mediatek,mt7622-uart
+              - mediatek,mt7623-uart
+              - mediatek,mt7629-uart
+              - mediatek,mt7986-uart
+              - mediatek,mt8127-uart
+              - mediatek,mt8135-uart
+              - mediatek,mt8173-uart
+              - mediatek,mt8183-uart
+              - mediatek,mt8186-uart
+              - mediatek,mt8188-uart
+              - mediatek,mt8192-uart
+              - mediatek,mt8195-uart
+              - mediatek,mt8365-uart
+              - mediatek,mt8516-uart
+          - const: mediatek,mt6577-uart
+
+  reg:
+    description: The base address of the UART register bank
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The clock the baudrate is derived from
+      - description: The bus clock for register accesses
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: baud
+      - const: bus
+
+  dmas:
+    items:
+      - description: phandle to TX DMA
+      - description: phandle to RX DMA
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      The UART interrupt and optionally the RX in-band wakeup interrupt.
+    minItems: 1
+    items:
+      - const: uart
+      - const: wakeup
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@11006000 {
+        compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+        reg = <0x11006000 0x400>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "uart", "wakeup";
+        clocks = <&uart_clk>, <&bus_clk>;
+        clock-names = "baud", "bus";
+        pinctrl-0 = <&uart_pin>;
+        pinctrl-1 = <&uart_pin_sleep>;
+        pinctrl-names = "default", "sleep";
+    };
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
new file mode 100644
index 0000000000..c8dd440e97
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -0,0 +1,29 @@
+* Microchip Universal Asynchronous Receiver Transmitter (UART)
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-uart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- clocks: Phandle to the clock.
+          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Optional properties:
+- cts-gpios: CTS pin for UART
+
+Example:
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+			<113 IRQ_TYPE_LEVEL_HIGH>,
+			<114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart1
+				&pinctrl_uart1_cts
+				&pinctrl_uart1_rts>;
+		cts-gpios = <&gpio1 15 0>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 0000000000..3d2fb1a7ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- interrupt-names: should be "rx", "tx".
+- clocks: phandle to the input clock.
+
+Optional properties:
+- auto-flow-control: flow control enable.
+
+Example:
+	usio1: usio_uart@1e700010 {
+		compatible = "socionext,milbeaut-usio-uart";
+		reg = <0x1e700010 0x10>;
+		interrupts = <0 141 0x4>, <0 149 0x4>;
+		interrupt-names = "rx", "tx";
+		clocks = <&clk 2>;
+		auto-flow-control;
+	};
diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
new file mode 100644
index 0000000000..d10cc06c0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
@@ -0,0 +1,64 @@
+Device tree bindings for Marvell PXA SSP ports
+
+Required properties:
+
+	- compatible:	Must be one of
+				mrvl,pxa25x-ssp
+				mvrl,pxa25x-nssp
+				mrvl,pxa27x-ssp
+				mrvl,pxa3xx-ssp
+				mvrl,pxa168-ssp
+				mrvl,pxa910-ssp
+				mrvl,ce4100-ssp
+
+	- reg:		The memory base
+	- dmas:		Two dma phandles, one for rx, one for tx
+	- dma-names:	Must be "rx", "tx"
+
+
+Example for PXA3xx:
+
+	ssp0: ssp@41000000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41000000 0x40>;
+		ssp-id = <1>;
+		interrupts = <24>;
+		clock-names = "pxa27x-ssp.0";
+		dmas = <&dma 13
+			&dma 14>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp1: ssp@41700000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41700000 0x40>;
+		ssp-id = <2>;
+		interrupts = <16>;
+		clock-names = "pxa27x-ssp.1";
+		dmas = <&dma 15
+			&dma 16>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp2: ssp@41900000 {
+		compatibl3 = "mrvl,pxa3xx-ssp";
+		reg = <0x41900000 0x40>;
+		ssp-id = <3>;
+		interrupts = <0>;
+		clock-names = "pxa27x-ssp.2";
+		dmas = <&dma 66
+			&dma 67>;
+		dma-names = "rx", "tx";
+	};
+
+	ssp3: ssp@41a00000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41a00000 0x40>;
+		ssp-id = <4>;
+		interrupts = <13>;
+		clock-names = "pxa27x-ssp.3";
+		dmas = <&dma 2
+			&dma 3>;
+		dma-names = "rx", "tx";
+	};
+
diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
new file mode 100644
index 0000000000..a062bbca53
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
@@ -0,0 +1,56 @@
+* Marvell UART : Non standard UART used in some of Marvell EBU SoCs
+                 e.g., Armada-3700.
+
+Required properties:
+- compatible:
+    - "marvell,armada-3700-uart" for the standard variant of the UART
+      (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the
+      FIFO), called also UART1.
+    - "marvell,armada-3700-uart-ext" for the extended variant of the
+      UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit
+      accesses to the FIFO), called also UART2.
+- reg: offset and length of the register set for the device.
+- clocks: UART reference clock used to derive the baudrate. If no clock
+      is provided (possible only with the "marvell,armada-3700-uart"
+      compatible string for backward compatibility), it will only work
+      if the baudrate was initialized by the bootloader and no baudrate
+      change will then be possible. When provided it should be UART1-clk
+      for standard variant of UART and UART2-clk for extended variant
+      of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock
+      should not be used and are supported only for backward compatibility.
+- interrupts:
+    - Must contain three elements for the standard variant of the IP
+      (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx",
+      respectively the UART sum interrupt, the UART TX interrupt and
+      UART RX interrupt. A corresponding interrupt-names property must
+      be defined.
+    - Must contain two elements for the extended variant of the IP
+      (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
+      respectively the UART TX interrupt and the UART RX interrupt. A
+      corresponding interrupt-names property must be defined.
+    - For backward compatibility reasons, a single element interrupts
+      property is also supported for the standard variant of the IP,
+      containing only the UART sum interrupt. This form is deprecated
+      and should no longer be used.
+
+Example:
+	uart0: serial@12000 {
+		compatible = "marvell,armada-3700-uart";
+		reg = <0x12000 0x18>;
+		clocks = <&uartclk 0>;
+		interrupts =
+		<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+	};
+
+	uart1: serial@12200 {
+		compatible = "marvell,armada-3700-uart-ext";
+		reg = <0x12200 0x30>;
+		clocks = <&uartclk 1>;
+		interrupts =
+		<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+		<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "uart-tx", "uart-rx";
+	};
diff --git a/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
new file mode 100644
index 0000000000..a76af0f600
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nuvoton,ma35d1-serial.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nuvoton,ma35d1-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Min-Jen Chen <mjchen@nuvoton.com>
+  - Jacky Huang <ychuang3@nuvoton.com>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    const: nuvoton,ma35d1-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+    serial@40700000 {
+        compatible = "nuvoton,ma35d1-uart";
+        reg = <0x40700000 0x100>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk UART0_GATE>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
new file mode 100644
index 0000000000..e2d111b3e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nvidia,tegra194-tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Combined UART (TCU)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description:
+  The TCU is a system for sharing a hardware UART instance among multiple
+  systems within the Tegra SoC. It is implemented through a mailbox-
+  based protocol where each "virtual UART" has a pair of mailboxes, one
+  for transmitting and one for receiving, that is used to communicate
+  with the hardware implementing the TCU.
+
+properties:
+  $nodename:
+    pattern: "^serial(@.*)?$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra194-tcu
+      - items:
+          - enum:
+              - nvidia,tegra234-tcu
+          - const: nvidia,tegra194-tcu
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  mboxes:
+    description: |
+      List of phandles to mailbox channels used for receiving and
+      transmitting data from and to the hardware UART.
+    items:
+      - description: mailbox for receiving data from hardware UART
+      - description: mailbox for transmitting data to hardware UART
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    tcu: serial {
+        compatible = "nvidia,tegra194-tcu";
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+                 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+        mbox-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml
new file mode 100644
index 0000000000..04d55fecf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nvidia,tegra20-hsuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hsuart
+          - nvidia,tegra30-hsuart
+          - nvidia,tegra186-hsuart
+          - nvidia,tegra194-hsuart
+      - items:
+          - const: nvidia,tegra124-hsuart
+          - const: nvidia,tegra30-hsuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: serial
+
+  dmas:
+    items:
+      - description: DMA channel used for reception
+      - description: DMA channel used for transmission
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,enable-modem-interrupt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Enable modem interrupts. Should be enable only if all 8 lines of UART controller
+      are pinmuxed.
+
+  nvidia,adjust-baud-rates:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      List of entries providing percentage of baud rate adjustment within a range. Each entry
+      contains a set of 3 values: range low/high and adjusted rate. When the baud rate set on the
+      controller falls within the range mentioned in this field, the baud rate will be adjusted by
+      percentage mentioned here.
+
+      Example: <9600 115200 200>
+
+      Increase baud rate by 2% when set baud rate falls within range 9600 to 115200.
+
+      Standard UART devices are expected to have tolerance for baud rate error by -4 to +4 %. All
+      Tegra devices till Tegra210 had this support. However, Tegra186 chip has a known hardware
+      issue. UART RX baud rate tolerance level is 0% to +4% in 1-stop config. Otherwise, the
+      received data will have corruption/invalid framing errors. Parker errata suggests adjusting
+      baud rate to be higher than the deviations observed in TX.
+
+      TX deviation of connected device can be captured over scope (or noted from its spec) for
+      valid range and Tegra baud rate has to be set above actual TX baud rate observed. To do this
+      we use nvidia,adjust-baud-rates.
+
+      As an example, consider there is deviation observed in TX for baud rates as listed below. 0
+      to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expcted and
+      Tegra UART is expected to handle it. Due to the issue stated above, baud rate on Tegra UART
+      should be set equal to or above deviation observed for avoiding frame errors. Property
+      should be set like this:
+
+        nvidia,adjust-baud-rates = <0 9600 100>,
+                                   <9600 115200 200>;
+    items:
+      items:
+        - description: range lower bound
+        - description: range upper bound
+        - description: adjustment (in permyriad, i.e. 0.01%)
+
+allOf:
+  - $ref: serial.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@70006000 {
+        compatible = "nvidia,tegra30-hsuart";
+        reg = <0x70006000 0x40>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        nvidia,enable-modem-interrupt;
+        clocks = <&tegra_car TEGRA30_CLK_UARTA>;
+        resets = <&tegra_car 6>;
+        reset-names = "serial";
+        dmas = <&apbdma 8>, <&apbdma 8>;
+        dma-names = "rx", "tx";
+        nvidia,adjust-baud-rates = <1000000 4000000 136>; /* 1.36% shift */
+    };
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
new file mode 100644
index 0000000000..1a7e4bff04
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -0,0 +1,118 @@
+* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+* i2c as bus
+
+Required properties:
+- compatible: Should be one of the following:
+  - "nxp,sc16is740" for NXP SC16IS740,
+  - "nxp,sc16is741" for NXP SC16IS741,
+  - "nxp,sc16is750" for NXP SC16IS750,
+  - "nxp,sc16is752" for NXP SC16IS752,
+  - "nxp,sc16is760" for NXP SC16IS760,
+  - "nxp,sc16is762" for NXP SC16IS762.
+- reg: I2C address of the SC16IS7xx device.
+- interrupts: Should contain the UART interrupt
+- clocks: Reference to the IC source clock.
+	OR (when there is no clock provider visible to the platform)
+- clock-frequency: The source clock frequency for the IC.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+- irda-mode-ports: An array that lists the indices of the port that
+		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
+
+Example:
+        sc16is750: sc16is750@51 {
+                compatible = "nxp,sc16is750";
+                reg = <0x51>;
+                clocks = <&clk20m>;
+                interrupt-parent = <&gpio3>;
+                interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+        };
+
+	sc16is752: sc16is752@53 {
+		compatible = "nxp,sc16is752";
+		reg = <0x53>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@54 {
+		compatible = "nxp,sc16is752";
+		reg = <0x54>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
+
+* spi as bus
+
+Required properties:
+- compatible: Should be one of the following:
+  - "nxp,sc16is740" for NXP SC16IS740,
+  - "nxp,sc16is741" for NXP SC16IS741,
+  - "nxp,sc16is750" for NXP SC16IS750,
+  - "nxp,sc16is752" for NXP SC16IS752,
+  - "nxp,sc16is760" for NXP SC16IS760,
+  - "nxp,sc16is762" for NXP SC16IS762.
+- reg: SPI chip select number.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+- irda-mode-ports: An array that lists the indices of the port that
+		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
+
+Example:
+	sc16is750: sc16is750@0 {
+		compatible = "nxp,sc16is750";
+		reg = <0>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@1 {
+		compatible = "nxp,sc16is752";
+		reg = <1>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@2 {
+		compatible = "nxp,sc16is752";
+		reg = <2>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
diff --git a/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt
new file mode 100644
index 0000000000..0d439dfc1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt
@@ -0,0 +1,14 @@
+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+	uart1: serial@40014000 {
+		compatible = "nxp,lpc3220-hsuart";
+		reg = <0x40014000 0x1000>;
+		interrupts = <26 0>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
new file mode 100644
index 0000000000..9571041030
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/pl011.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell PL011 serial UART
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: serial.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl011
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl011
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    description:
+      When present, must have one state named "default",
+      and may contain a second name named "sleep". The former
+      state sets up pins for ordinary operation whereas
+      the latter state will put the associated pins to sleep
+      when the UART is unused
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  clocks:
+    description:
+      When present, the first clock listed must correspond to
+      the clock named UARTCLK on the IP block, i.e. the clock
+      to the external serial line, whereas the second clock
+      must correspond to the PCLK clocking the internal logic
+      of the block. Just listing one clock (the first one) is
+      deprecated.
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: uartclk
+      - const: apb_pclk
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: tx
+
+  auto-poll:
+    description:
+      Enables polling when using RX DMA.
+    type: boolean
+
+  poll-rate-ms:
+    description:
+      Rate at which poll occurs when auto-poll is set.
+      default 100ms.
+    default: 100
+
+  poll-timeout-ms:
+    description:
+      Poll timeout when auto-poll is set, default
+      3000ms.
+    default: 3000
+
+  resets:
+    maxItems: 1
+
+  reg-io-width:
+    description:
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [1, 4]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+dependencies:
+  poll-rate-ms: [ auto-poll ]
+  poll-timeout-ms: [ auto-poll ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@80120000 {
+      compatible = "arm,pl011", "arm,primecell";
+      reg = <0x80120000 0x1000>;
+      interrupts = <0 11 4>;
+      dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+      dma-names = "rx", "tx";
+      clocks = <&foo_clk>, <&bar_clk>;
+      clock-names = "uartclk", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
new file mode 100644
index 0000000000..a644e5af12
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qca,ar9330-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9330 High-Speed UART
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: qca,ar9330-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: uart
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@18020000 {
+      compatible = "qca,ar9330-uart";
+      reg = <0x18020000 0x14>;
+      clocks = <&ref>;
+      clock-names = "uart";
+      interrupt-parent = <&intc>;
+      interrupts = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml
new file mode 100644
index 0000000000..a052aaef21
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM SoC Serial UART
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The MSM serial UART hardware is designed for low-speed use cases where a
+  dma-engine isn't needed. From a software perspective it's mostly compatible
+  with the MSM serial UARTDM except that it only supports reading and writing
+  one character at a time.
+
+properties:
+  compatible:
+    const: qcom,msm-uart
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+examples:
+  - |
+    serial@a9c00000 {
+        compatible = "qcom,msm-uart";
+        reg = <0xa9c00000 0x1000>;
+        interrupts = <11>;
+        clocks = <&uart_cxc>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
new file mode 100644
index 0000000000..484b9a51f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM Serial UARTDM
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The MSM serial UARTDM hardware is designed for high-speed use cases where the
+  transmit and/or receive channels can be offloaded to a dma-engine. From a
+  software perspective it's mostly compatible with the MSM serial UART except
+  that it supports reading and writing multiple characters at a time.
+
+  Note:: Aliases may be defined to ensure the correct ordering of the UARTs.
+  The alias serialN will result in the UART being assigned port N.  If any
+  serialN alias exists, then an alias must exist for each enabled UART.  The
+  serialN aliases should be in a .dts file instead of in a .dtsi file.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm-uartdm-v1.1
+          - qcom,msm-uartdm-v1.2
+          - qcom,msm-uartdm-v1.3
+          - qcom,msm-uartdm-v1.4
+      - const: qcom,msm-uartdm
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  qcom,rx-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Identificator for Client Rate Control Interface to be used with RX DMA
+      channel. Required when using DMA for reception with UARTDM v1.3 and
+      below.
+
+  qcom,tx-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Identificator for Client Rate Control Interface to be used with TX DMA
+      channel. Required when using DMA for transmission with UARTDM v1.3 and
+      below.
+
+  reg:
+    minItems: 1
+    items:
+      - description: Main control registers
+      - description: An optional second register location shall specify the GSBI control region.
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,msm-uartdm-v1.3
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@f991e000 {
+        compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+        reg = <0xf991e000 0x1000>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+        clock-names = "core", "iface";
+        dmas = <&dma0 0>, <&dma0 1>;
+        dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
new file mode 100644
index 0000000000..dd33794b35
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-uart
+      - qcom,geni-debug-uart
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: UART core irq
+      - description: Wakeup irq (RX GPIO)
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+    serial@a88000 {
+        compatible = "qcom,geni-uart";
+        reg = <0xa88000 0x7000>;
+        interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-0 = <&qup_uart0_default>;
+        pinctrl-names = "default";
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
new file mode 100644
index 0000000000..5f4ed82212
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rda,8810pl-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro UART Interface
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    uart3: serial@20a90000 {
+      compatible = "rda,8810pl-uart";
+      reg = <0x20a90000 0x1000>;
+      interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&uart_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
new file mode 100644
index 0000000000..3fc2601f13
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,em-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile UART Interface
+
+maintainers:
+  - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a09g011-uart    # RZ/V2M
+          - const: renesas,em-uart        # generic EMMA Mobile compatible UART
+
+      - items:
+          - const: renesas,em-uart        # generic EMMA Mobile compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: UART functional clock
+      - description: Internal clock to access the registers
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sclk
+      - const: pclk
+
+allOf:
+  - $ref: serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g011-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    uart0: serial@e1020000 {
+        compatible = "renesas,em-uart";
+        reg = <0xe1020000 0x38>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&usia_u0_sclk>;
+        clock-names = "sclk";
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
new file mode 100644
index 0000000000..1c7f1276ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,hscif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,hscif-r8a7778      # R-Car M1
+              - renesas,hscif-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-hscif # R-Car Gen1
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a7742      # RZ/G1H
+              - renesas,hscif-r8a7743      # RZ/G1M
+              - renesas,hscif-r8a7744      # RZ/G1N
+              - renesas,hscif-r8a7745      # RZ/G1E
+              - renesas,hscif-r8a77470     # RZ/G1C
+              - renesas,hscif-r8a7790      # R-Car H2
+              - renesas,hscif-r8a7791      # R-Car M2-W
+              - renesas,hscif-r8a7792      # R-Car V2H
+              - renesas,hscif-r8a7793      # R-Car M2-N
+              - renesas,hscif-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a774a1     # RZ/G2M
+              - renesas,hscif-r8a774b1     # RZ/G2N
+              - renesas,hscif-r8a774c0     # RZ/G2E
+              - renesas,hscif-r8a774e1     # RZ/G2H
+              - renesas,hscif-r8a7795      # R-Car H3
+              - renesas,hscif-r8a7796      # R-Car M3-W
+              - renesas,hscif-r8a77961     # R-Car M3-W+
+              - renesas,hscif-r8a77965     # R-Car M3-N
+              - renesas,hscif-r8a77970     # R-Car V3M
+              - renesas,hscif-r8a77980     # R-Car V3H
+              - renesas,hscif-r8a77990     # R-Car E3
+              - renesas,hscif-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,hscif-r8a779a0     # R-Car V3U
+              - renesas,hscif-r8a779f0     # R-Car S4-8
+              - renesas,hscif-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-hscif # R-Car Gen4
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - fck # UART functional clock
+        - hsck # optional external clock input
+        - brg_int # optional internal clock source for BRG frequency divider
+        - scif_clk # optional external clock source for BRG frequency divider
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-hscif
+          - renesas,rcar-gen3-hscif
+          - renesas,rcar-gen4-hscif
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    aliases {
+        serial1 = &hscif1;
+    };
+
+    hscif1: serial@e6550000 {
+        compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+                     "renesas,hscif";
+        reg = <0xe6550000 96>;
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 519>;
+        uart-has-rtscts;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
new file mode 100644
index 0000000000..9f7305200c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,sci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Serial Communication Interface
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-sci     # RZ/G2UL
+              - renesas,r9a07g044-sci     # RZ/G2{L,LC}
+              - renesas,r9a07g054-sci     # RZ/V2L
+          - const: renesas,sci            # generic SCI compatible UART
+
+      - items:
+          - const: renesas,sci            # generic SCI compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Error interrupt
+      - description: Receive buffer full interrupt
+      - description: Transmit buffer empty interrupt
+      - description: Transmit end interrupt
+
+  interrupt-names:
+    items:
+      - const: eri
+      - const: rxi
+      - const: txi
+      - const: tei
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - fck # UART functional clock
+        - sck # optional external clock input
+
+  uart-has-rtscts: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g043-sci
+          - renesas,r9a07g044-sci
+          - renesas,r9a07g054-sci
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    power-domains:
+      maxItems: 1
+
+  required:
+    - resets
+    - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    aliases {
+        serial0 = &sci0;
+    };
+
+    sci0: serial@1004d000 {
+        compatible = "renesas,r9a07g044-sci", "renesas,sci";
+        reg = <0x1004d000 0x400>;
+        interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "eri", "rxi", "txi", "tei";
+        clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+        clock-names = "fck";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_SCI0_RST>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
new file mode 100644
index 0000000000..99030fc18c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,scif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Serial Communication Interface with FIFO (SCIF)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scif-r7s72100     # RZ/A1H
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r7s9210      # RZ/A2
+
+      - items:
+          - enum:
+              - renesas,scif-r8a7778      # R-Car M1
+              - renesas,scif-r8a7779      # R-Car H1
+          - const: renesas,rcar-gen1-scif # R-Car Gen1
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a7742      # RZ/G1H
+              - renesas,scif-r8a7743      # RZ/G1M
+              - renesas,scif-r8a7744      # RZ/G1N
+              - renesas,scif-r8a7745      # RZ/G1E
+              - renesas,scif-r8a77470     # RZ/G1C
+              - renesas,scif-r8a7790      # R-Car H2
+              - renesas,scif-r8a7791      # R-Car M2-W
+              - renesas,scif-r8a7792      # R-Car V2H
+              - renesas,scif-r8a7793      # R-Car M2-N
+              - renesas,scif-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a774a1     # RZ/G2M
+              - renesas,scif-r8a774b1     # RZ/G2N
+              - renesas,scif-r8a774c0     # RZ/G2E
+              - renesas,scif-r8a774e1     # RZ/G2H
+              - renesas,scif-r8a7795      # R-Car H3
+              - renesas,scif-r8a7796      # R-Car M3-W
+              - renesas,scif-r8a77961     # R-Car M3-W+
+              - renesas,scif-r8a77965     # R-Car M3-N
+              - renesas,scif-r8a77970     # R-Car V3M
+              - renesas,scif-r8a77980     # R-Car V3H
+              - renesas,scif-r8a77990     # R-Car E3
+              - renesas,scif-r8a77995     # R-Car D3
+          - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r8a779a0     # R-Car V3U
+              - renesas,scif-r8a779f0     # R-Car S4-8
+              - renesas,scif-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-scif # R-Car Gen4
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
+              - renesas,scif-r9a07g044      # RZ/G2{L,LC}
+
+      - items:
+          - enum:
+              - renesas,scif-r9a07g043      # RZ/G2UL and RZ/Five
+              - renesas,scif-r9a07g054      # RZ/V2L
+          - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt
+          - description: Receive buffer full interrupt
+          - description: Transmit buffer empty interrupt
+          - description: Break interrupt
+      - items:
+          - description: Error interrupt
+          - description: Receive buffer full interrupt
+          - description: Transmit buffer empty interrupt
+          - description: Break interrupt
+          - description: Data Ready interrupt
+          - description: Transmit End interrupt
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: eri
+          - const: rxi
+          - const: txi
+          - const: bri
+      - items:
+          - const: eri
+          - const: rxi
+          - const: txi
+          - const: bri
+          - const: dri
+          - const: tei
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum:
+        - fck # UART functional clock
+        - sck # optional external clock input
+        - brg_int # optional internal clock source for BRG frequency divider
+        - scif_clk # optional external clock source for BRG frequency divider
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scif
+          - renesas,rcar-gen3-scif
+          - renesas,rcar-gen4-scif
+          - renesas,scif-r9a07g044
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+    aliases {
+        serial0 = &scif0;
+    };
+
+    scif0: serial@e6e60000 {
+        compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+                     "renesas,scif";
+        reg = <0xe6e60000 64>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+                 <&scif_clk>;
+        clock-names = "fck", "brg_int", "scif_clk";
+        dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 721>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
new file mode 100644
index 0000000000..499507678c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,scifa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Serial Communications Interface with FIFO A (SCIFA)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scifa-r8a73a4      # R-Mobile APE6
+              - renesas,scifa-r8a7740      # R-Mobile A1
+              - renesas,scifa-sh73a0       # SH-Mobile AG5
+          - const: renesas,scifa           # generic SCIFA compatible UART
+
+      - items:
+          - enum:
+              - renesas,scifa-r8a7742      # RZ/G1H
+              - renesas,scifa-r8a7743      # RZ/G1M
+              - renesas,scifa-r8a7744      # RZ/G1N
+              - renesas,scifa-r8a7745      # RZ/G1E
+              - renesas,scifa-r8a7790      # R-Car H2
+              - renesas,scifa-r8a7791      # R-Car M2-W
+              - renesas,scifa-r8a7793      # R-Car M2-N
+              - renesas,scifa-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1
+          - const: renesas,scifa           # generic SCIFA compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scifa
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    aliases {
+        serial0 = &scifa0;
+    };
+
+    scifa0: serial@e6c40000 {
+        compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+                     "renesas,scifa";
+        reg = <0xe6c40000 64>;
+        interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 204>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 204>;
+        dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+        dma-names = "tx", "rx", "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
new file mode 100644
index 0000000000..810d8a991f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/renesas,scifb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Serial Communications Interface with FIFO B (SCIFB)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,scifb-r8a73a4      # R-Mobile APE6
+              - renesas,scifb-r8a7740      # R-Mobile A1
+              - renesas,scifb-sh73a0       # SH-Mobile AG5
+          - const: renesas,scifb           # generic SCIFB compatible UART
+
+      - items:
+          - enum:
+              - renesas,scifb-r8a7742      # RZ/G1H
+              - renesas,scifb-r8a7743      # RZ/G1M
+              - renesas,scifb-r8a7744      # RZ/G1N
+              - renesas,scifb-r8a7745      # RZ/G1E
+              - renesas,scifb-r8a7790      # R-Car H2
+              - renesas,scifb-r8a7791      # R-Car M2-W
+              - renesas,scifb-r8a7793      # R-Car M2-N
+              - renesas,scifb-r8a7794      # R-Car E2
+          - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1
+          - const: renesas,scifb           # generic SCIFB compatible UART
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    enum:
+      - fck # UART functional clock
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rcar-gen2-scifb
+then:
+  required:
+    - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    scifb: serial@e6c30000 {
+        compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+        reg = <0xe6c30000 0x100>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+        clock-names = "fck";
+        power-domains = <&pd_a3sp>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
new file mode 100644
index 0000000000..a7fe93efc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rs485.txt
@@ -0,0 +1 @@
+See rs485.yaml
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
new file mode 100644
index 0000000000..9418fd66a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rs485.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RS485 serial communications
+
+description: The RTS signal is capable of automatically controlling line
+  direction for the built-in half-duplex mode. The properties described
+  hereafter shall be given to a half-duplex capable UART node.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  rs485-rts-delay:
+    description: prop-encoded-array <a b>
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      items:
+        - description: Delay between rts signal and beginning of data sent in
+            milliseconds. It corresponds to the delay before sending data.
+          default: 0
+          maximum: 100
+        - description: Delay between end of data sent and rts signal in milliseconds.
+            It corresponds to the delay after sending data and actual release
+            of the line.
+          default: 0
+          maximum: 100
+
+  rs485-rts-active-high:
+    description: drive RTS high when sending (this is the default).
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-rts-active-low:
+    description: drive RTS low when sending (default is high).
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-rx-active-high:
+    description: Polarity of receiver enable signal (when separate from RTS).
+      True indicates active high (default is low).
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  linux,rs485-enabled-at-boot-time:
+    description: enables the rs485 feature at boot time. It can be disabled
+      later with proper ioctl.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-rx-during-tx:
+    description: enables the receiving of data even while sending data.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-term-gpios:
+    description: GPIO pin to enable RS485 bus termination.
+    maxItems: 1
+
+  rs485-rx-during-tx-gpios:
+    description: Output GPIO pin that sets the state of rs485-rx-during-tx. This
+      signal can be used to control the RX part of an RS485 transceiver. Thereby
+      the active state enables RX during TX.
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
new file mode 100644
index 0000000000..8bd88d5cbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |+
+  Each Samsung UART should have an alias correctly numbered in the "aliases"
+  node, according to serialN format, where N is the port number (non-negative
+  decimal integer) as specified by User's Manual of respective SoC.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: samsung,exynosautov9-uart
+          - const: samsung,exynos850-uart
+      - enum:
+          - apple,s5l-uart
+          - axis,artpec8-uart
+          - samsung,s3c2410-uart
+          - samsung,s3c2412-uart
+          - samsung,s3c2440-uart
+          - samsung,s3c6400-uart
+          - samsung,s5pv210-uart
+          - samsung,exynos4210-uart
+          - samsung,exynos5433-uart
+          - samsung,exynos850-uart
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    description: |
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [ 1, 4 ]
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    description: N = 0 is allowed for SoCs without internal baud clock mux.
+    minItems: 2
+    items:
+      - const: uart
+      - pattern: '^clk_uart_baud[0-3]$'
+      - pattern: '^clk_uart_baud[0-3]$'
+      - pattern: '^clk_uart_baud[0-3]$'
+      - pattern: '^clk_uart_baud[0-3]$'
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  interrupts:
+    description: RX interrupt and optionally TX interrupt.
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  samsung,uart-fifosize:
+    description: The fifo size supported by the UART channel.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [16, 64, 256]
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-uart
+              - samsung,s5pv210-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: uart
+            - pattern: '^clk_uart_baud[0-1]$'
+            - pattern: '^clk_uart_baud[0-1]$'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - apple,s5l-uart
+              - axis,artpec8-uart
+              - samsung,exynos4210-uart
+              - samsung,exynos5433-uart
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: uart
+            - const: clk_uart_baud0
+
+examples:
+  - |
+    #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+    uart0: serial@7f005000 {
+        compatible = "samsung,s3c6400-uart";
+        reg = <0x7f005000 0x100>;
+        interrupt-parent = <&vic1>;
+        interrupts = <5>;
+        clock-names = "uart", "clk_uart_baud2",
+                      "clk_uart_baud3";
+        clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+                 <&clocks SCLK_UART>;
+        samsung,uart-fifosize = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
new file mode 100644
index 0000000000..5727bd549d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Serial Interface Generic
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+  This document lists a set of generic properties for describing UARTs in a
+  device tree.  Whether these properties apply to a particular device depends
+  on the DT bindings for the actual device.
+
+  Each enabled UART may have an optional "serialN" alias in the "aliases" node,
+  where N is the port number (non-negative decimal integer) as printed on the
+  label next to the physical port.
+
+properties:
+  $nodename:
+    pattern: "^serial(@.*)?$"
+
+  label: true
+
+  cts-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's CTS line.
+
+  dcd-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DCD line.
+
+  dsr-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DSR line.
+
+  dtr-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's DTR line.
+
+  rng-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's RNG line.
+
+  rts-gpios:
+    maxItems: 1
+    description:
+      Must contain a GPIO specifier, referring to the GPIO pin to be used as
+      the UART's RTS line.
+
+  uart-has-rtscts:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates that the UART has dedicated lines
+      for RTS/CTS hardware flow control, and that they are available for use
+      (wired and enabled by pinmux configuration).  This depends on both the
+      UART hardware and the board wiring.
+
+  rx-tx-swap:
+    type: boolean
+    description: RX and TX pins are swapped.
+
+  cts-rts-swap:
+    type: boolean
+    description: CTS and RTS pins are swapped.
+
+  rx-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RX FIFO threshold configuration (in bytes).
+
+  tx-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      TX FIFO threshold configuration (in bytes).
+
+if:
+  required:
+    - uart-has-rtscts
+then:
+  properties:
+    cts-gpios: false
+    rts-gpios: false
+
+patternProperties:
+  "^(bluetooth|gnss|gps|mcu)$":
+    if:
+      type: object
+    then:
+      description:
+        Serial attached devices shall be a child node of the host UART device
+        the slave device is attached to. It is expected that the attached
+        device is the only child node of the UART device. The slave device node
+        name shall reflect the generic type of device for the node.
+
+      properties:
+        compatible:
+          description:
+            Compatible of the device connected to the serial port.
+
+        max-speed:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            The maximum baud rate the device operates at.
+            This should only be present if the maximum is less than the slave
+            device can support.  For example, a particular board has some
+            signal quality issue or the host processor can't support higher
+            baud rates.
+
+        current-speed:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            The current baud rate the device operates at.
+            This should only be present in case a driver has no chance to know
+            the baud rate of the slave device.
+            Examples:
+              * device supports auto-baud
+              * the rate is setup by a bootloader and there is no way to reset
+                the device
+              * device baud rate is configured by its firmware but there is no
+                way to request the actual settings
+
+      required:
+        - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    serial@1234 {
+        compatible = "ns16550a";
+        reg = <0x1234 0x20>;
+        interrupts = <1>;
+
+        bluetooth {
+            compatible = "brcm,bcm4330-bt";
+            interrupt-parent = <&gpio>;
+            interrupts = <10>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
new file mode 100644
index 0000000000..b0df1cac49
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/sifive-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive asynchronous serial interface (UART)
+
+maintainers:
+  - Pragnesh Patel <pragnesh.patel@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sifive,fu540-c000-uart
+          - sifive,fu740-c000-uart
+          - canaan,k210-uarths
+      - const: sifive,uart0
+
+    description:
+      Should be something similar to "sifive,<chip>-uart"
+      for the UART as integrated on a particular chip,
+      and "sifive,uart<version>" for the general UART IP
+      block programming model.
+
+      UART HDL that corresponds to the IP block version
+      numbers can be found here -
+
+      https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    serial@10010000 {
+        compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+        interrupt-parent = <&plic0>;
+        interrupts = <80>;
+        reg = <0x10010000 0x1000>;
+        clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
new file mode 100644
index 0000000000..17c553123f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare ABP UART
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a06g032-uart
+              - renesas,r9a06g033-uart
+          - const: renesas,rzn1-uart
+      - items:
+          - enum:
+              - rockchip,px30-uart
+              - rockchip,rk1808-uart
+              - rockchip,rk3036-uart
+              - rockchip,rk3066-uart
+              - rockchip,rk3128-uart
+              - rockchip,rk3188-uart
+              - rockchip,rk3288-uart
+              - rockchip,rk3308-uart
+              - rockchip,rk3328-uart
+              - rockchip,rk3368-uart
+              - rockchip,rk3399-uart
+              - rockchip,rk3568-uart
+              - rockchip,rk3588-uart
+              - rockchip,rv1108-uart
+              - rockchip,rv1126-uart
+          - const: snps,dw-apb-uart
+      - items:
+          - enum:
+              - brcm,bcm11351-dw-apb-uart
+              - brcm,bcm21664-dw-apb-uart
+          - const: snps,dw-apb-uart
+      - items:
+          - enum:
+              - starfive,jh7100-hsuart
+              - starfive,jh7100-uart
+          - const: snps,dw-apb-uart
+      - const: snps,dw-apb-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency: true
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: baudclk
+      - const: apb_pclk
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  snps,uart-16550-compatible:
+    description: reflects the value of UART_16550_COMPATIBLE configuration
+      parameter. Define this if your UART does not implement the busy functionality.
+    type: boolean
+
+  resets:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width: true
+
+  dcd-override:
+    description: Override the DCD modem status signal. This signal will
+      always be reported as active instead of being obtained from the modem
+      status register. Define this if your serial port does not use this
+      pin.
+    type: boolean
+
+  dsr-override:
+    description: Override the DTS modem status signal. This signal will
+      always be reported as active instead of being obtained from the modem
+      status register. Define this if your serial port does not use this
+      pin.
+    type: boolean
+
+  cts-override:
+    description: Override the CTS modem status signal. This signal will
+      always be reported as active instead of being obtained from the modem
+      status register. Define this if your serial port does not use this
+      pin.
+    type: boolean
+
+  ri-override:
+    description: Override the RI modem status signal. This signal will always
+      be reported as inactive instead of being obtained from the modem status
+      register. Define this if your serial port does not use this pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@80230000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x80230000 0x100>;
+      clock-frequency = <3686400>;
+      interrupts = <10>;
+      reg-shift = <2>;
+      reg-io-width = <4>;
+      dcd-override;
+      dsr-override;
+      cts-override;
+      ri-override;
+    };
+
+  - |
+    // Example with one clock:
+    serial@80230000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x80230000 0x100>;
+      clocks = <&baudclk>;
+      interrupts = <10>;
+      reg-shift = <2>;
+      reg-io-width = <4>;
+    };
+
+  - |
+    // Example with two clocks:
+    serial@80230000 {
+      compatible = "snps,dw-apb-uart";
+      reg = <0x80230000 0x100>;
+      clocks = <&baudclk>, <&apb_pclk>;
+      clock-names = "baudclk", "apb_pclk";
+      interrupts = <10>;
+      reg-shift = <2>;
+      reg-io-width = <4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
new file mode 100644
index 0000000000..3d01cc3557
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/socionext,uniphier-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier UART controller
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+  compatible:
+    const: socionext,uniphier-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  auto-flow-control:
+    description: enable automatic flow control support.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &serial0;
+    };
+
+    serial0: serial@54006800 {
+        compatible = "socionext,uniphier-uart";
+        reg = <0x54006800 0x40>;
+        interrupts = <0 33 4>;
+        clocks = <&uart_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
new file mode 100644
index 0000000000..28ff77aa86
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/sprd-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum serial UART
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sprd,sc9860-uart
+              - sprd,sc9863a-uart
+              - sprd,ums512-uart
+          - const: sprd,sc9836-uart
+      - const: sprd,sc9836-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description: |
+      "enable" for UART module enable clock, "uart" for UART clock, "source"
+      for UART source (parent) clock.
+    items:
+      - const: enable
+      - const: uart
+      - const: source
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    serial@0 {
+      compatible = "sprd,sc9860-uart", "sprd,sc9836-uart";
+      reg = <0x0 0x100>;
+      interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+      dma-names = "rx", "tx";
+      dmas = <&ap_dma 19>, <&ap_dma 20>;
+      clock-names = "enable", "uart", "source";
+      clocks = <&clk_ap_apb_gates 9>, <&clk_uart0>, <&ext_26m>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
new file mode 100644
index 0000000000..1df8ffe95f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Erwan Le Ray <erwan.leray@foss.st.com>
+
+title: STMicroelectronics STM32 USART
+
+properties:
+  compatible:
+    enum:
+      - st,stm32-uart
+      - st,stm32f7-uart
+      - st,stm32h7-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  label:
+    description: label associated with this uart
+
+  st,hw-flow-ctrl:
+    description: enable hardware flow control (deprecated)
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rx-tx-swap: true
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    items:
+      enum: [ rx, tx ]
+    minItems: 1
+    maxItems: 2
+
+# cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts'
+# or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
+# control instead of dedicated pins.
+#
+# It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or
+# 'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design.
+  cts-gpios: true
+  rts-gpios: true
+
+  wakeup-source: true
+
+  rx-threshold:
+    description:
+      If value is set to 1, RX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
+  tx-threshold:
+    description:
+      If value is set to 1, TX FIFO threshold is disabled.
+    enum: [1, 2, 4, 8, 12, 14, 16]
+    default: 8
+
+allOf:
+  - $ref: rs485.yaml#
+  - $ref: serial.yaml#
+  - if:
+      required:
+        - st,hw-flow-ctrl
+    then:
+      properties:
+        cts-gpios: false
+        rts-gpios: false
+  - if:
+      properties:
+        compatible:
+          const: st,stm32-uart
+    then:
+      properties:
+        rx-tx-swap: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-uart
+              - st,stm32f7-uart
+    then:
+      properties:
+        rx-threshold: false
+        tx-threshold: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    usart1: serial@40011000 {
+      compatible = "st,stm32h7-uart";
+      reg = <0x40011000 0x400>;
+      interrupts = <37>;
+      clocks = <&rcc 0 164>;
+      dmas = <&dma2 2 4 0x414 0x0>,
+             <&dma2 7 4 0x414 0x0>;
+      dma-names = "rx", "tx";
+      rx-threshold = <4>;
+      tx-threshold = <4>;
+      rs485-rts-active-low;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt
new file mode 100644
index 0000000000..a1b9b6f349
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st-asc.txt
@@ -0,0 +1,18 @@
+*st-asc(Serial Port)
+
+Required properties:
+- compatible : Should be "st,asc".
+- reg, reg-names, interrupts, interrupt-names	: Standard way to define device
+			resources with names. look in
+			Documentation/devicetree/bindings/resource-names.txt
+
+Optional properties:
+- st,hw-flow-ctrl	bool flag to enable hardware flow control.
+- st,force-m1		bool flat to force asc to be in Mode-1 recommended
+			for high bit rates (above 19.2K)
+Example:
+serial@fe440000{
+    compatible    = "st,asc";
+    reg         = <0xfe440000 0x2c>;
+    interrupts     =  <0 209 0>;
+};
diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
new file mode 100644
index 0000000000..7d0a4bcb88
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoC SP7021 UART Controller
+
+maintainers:
+  - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    aliases {
+        serial0 = &uart0;
+    };
+
+    uart0: serial@9c000900 {
+        compatible = "sunplus,sp7021-uart";
+        reg = <0x9c000900 0x80>;
+        interrupt-parent = <&intc>;
+        interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x28>;
+        resets = <&rstc 0x18>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/vt8500-uart.txt b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
new file mode 100644
index 0000000000..2b64e6107f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
@@ -0,0 +1,27 @@
+* VIA VT8500 and WonderMedia WM8xxx UART Controller
+
+Required properties:
+- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and
+	including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later)
+
+- reg: base physical address of the controller and length of memory mapped
+	region.
+
+- interrupts: hardware interrupt number
+
+- clocks: shall be the input parent clock phandle for the clock. This should
+	be the 24Mhz reference clock.
+
+Aliases may be defined to ensure the correct ordering of the uarts.
+
+Example:
+	aliases {
+		serial0 = &uart0;
+	};
+
+	uart0: serial@d8200000 {
+		compatible = "via,vt8500-uart";
+		reg = <0xd8200000 0x1040>;
+		interrupts = <32>;
+		clocks = <&clkuart0>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
new file mode 100644
index 0000000000..08dcb275d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Axi Uartlite
+
+maintainers:
+  - Peter Korsgaard <jacmet@sunsite.dk>
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - xlnx,xps-uartlite-1.00.a
+        - xlnx,opb-uartlite-1.00.b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Set Uart port number
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  current-speed:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The fixed baud rate that the device was configured for.
+
+  xlnx,data-bits:
+    enum: [5, 6, 7, 8]
+    description:
+      The fixed number of data bits that the device was configured for.
+
+  xlnx,use-parity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Whether parity checking was enabled when the device was configured.
+
+  xlnx,odd-parity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Whether odd parity was configured.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - current-speed
+  - xlnx,data-bits
+  - xlnx,use-parity
+
+allOf:
+  - $ref: serial.yaml#
+  - if:
+      properties:
+        xlnx,use-parity:
+          const: 1
+    then:
+      required:
+        - xlnx,odd-parity
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@800c0000 {
+        compatible = "xlnx,xps-uartlite-1.00.a";
+        reg = <0x800c0000 0x10000>;
+        interrupts = <0x0 0x6e 0x1>;
+        port-number = <0>;
+        current-speed = <115200>;
+        xlnx,data-bits = <8>;
+        xlnx,use-parity = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
new file mode 100644
index 0000000000..7fa70fd1f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/allwinner,sun4i-a10-ps2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 PS2 Host Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description:
+  A20 PS2 is dual role controller (PS2 host and PS2 device). These
+  bindings for PS2 A10/A20 host controller. IBM compliant IBM PS2 and
+  AT-compatible keyboard and mouse can be connected.
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-ps2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun7i-a20-ccu.h>
+
+    ps20: ps2@1c2a000 {
+        compatible = "allwinner,sun4i-a10-ps2";
+        reg = <0x01c2a000 0x400>;
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_APB1_PS20>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serio/altera_ps2.txt b/Documentation/devicetree/bindings/serio/altera_ps2.txt
new file mode 100644
index 0000000000..520199e2e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/altera_ps2.txt
@@ -0,0 +1,5 @@
+Altera UP PS/2 controller
+
+Required properties:
+- compatible : should be "ALTR,ps2-1.0". <DEPRECATED>
+- compatible : should be "altr,ps2-1.0".
diff --git a/Documentation/devicetree/bindings/serio/arm,pl050.yaml b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
new file mode 100644
index 0000000000..d80f58d154
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/arm,pl050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL050 PS/2 Keyboard/Mouse Interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell PS2 Keyboard/Mouse Interface (KMI) is an AMBA compliant
+  peripheral that can be used to implement a keyboard or mouse interface that
+  is IBM PS2 or AT compatible.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl050
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl050
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: KMI reference clock, used to generate the bus timing
+      - description: APB register access clock
+
+  clock-names:
+    items:
+      - const: KMIREFCLK
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    serio@70000 {
+        compatible = "arm,pl050", "arm,primecell";
+        reg = <0x070000 0x1000>;
+        interrupts = <8>;
+        clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+        clock-names = "KMIREFCLK", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
new file mode 100644
index 0000000000..0e72183f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
@@ -0,0 +1,13 @@
+OLPC AP-SP serio interface
+
+Required properties:
+- compatible : "olpc,ap-sp"
+- reg : base address and length of SoC's WTM registers
+- interrupts : SP-AP interrupt
+
+Example:
+	ap-sp@d4290000 {
+		compatible = "olpc,ap-sp";
+		reg = <0xd4290000 0x1000>;
+		interrupts = <40>;
+	}
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
new file mode 100644
index 0000000000..99848bc34f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO based PS/2
+
+maintainers:
+  - Danilo Krummrich <danilokrummrich@dk-develop.de>
+
+properties:
+  compatible:
+    const: ps2-gpio
+
+  data-gpios:
+    description:
+      the gpio used for the data signal - this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+      definition
+    maxItems: 1
+
+  clk-gpios:
+    description:
+      the gpio used for the clock signal - this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+      definition
+    maxItems: 1
+
+  interrupts:
+    description:
+      The given interrupt should trigger on the falling edge of the clock line.
+    maxItems: 1
+
+  write-enable:
+    type: boolean
+    description:
+      Indicates whether write function is provided to serio device. Possibly
+      providing the write function will not work, because of the tough timing
+      requirements.
+
+required:
+  - compatible
+  - data-gpios
+  - clk-gpios
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ps2 {
+        compatible = "ps2-gpio";
+        interrupt-parent = <&gpio>;
+        interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        data-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        clk-gpios = <&gpio 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        write-enable;
+    };
diff --git a/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt b/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt
new file mode 100644
index 0000000000..38c2f21e80
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/snps-arc_ps2.txt
@@ -0,0 +1,16 @@
+* ARC PS/2 driver: PS/2 block used in some ARC FPGA's & nSIM OSCI model
+
+Required properties:
+- compatible		: "snps,arc_ps2"
+- reg			: offset and length (always 0x14) of registers
+- interrupts		: interrupt
+- interrupt-names	: name of interrupt, must be "arc_ps2_irq"
+
+Example:
+
+serio@c9000400 {
+	compatible = "snps,arc_ps2";
+	reg = <0xc9000400 0x14>;
+	interrupts = <13>;
+	interrupt-names = "arc_ps2_irq";
+}
diff --git a/Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt b/Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt
new file mode 100644
index 0000000000..beaa3b6408
--- /dev/null
+++ b/Documentation/devicetree/bindings/sifive/sifive-blocks-ip-versioning.txt
@@ -0,0 +1,38 @@
+DT compatible string versioning for SiFive open-source IP blocks
+
+This document describes the version specification for DT "compatible"
+strings for open-source SiFive IP blocks.  HDL for these IP blocks
+can be found in this public repository:
+
+https://github.com/sifive/sifive-blocks
+
+IP block-specific DT compatible strings are contained within the HDL,
+in the form "sifive,<ip-block-name><integer version number>".
+
+An example is "sifive,uart0" from:
+
+https://github.com/sifive/sifive-blocks/blob/v1.0/src/main/scala/devices/uart/UART.scala#L43
+
+Until these IP blocks (or IP integration) support version
+auto-discovery, the maintainers of these IP blocks intend to increment
+the suffixed number in the compatible string whenever the software
+interface to these IP blocks changes, or when the functionality of the
+underlying IP blocks changes in a way that software should be aware of.
+
+Driver developers can use compatible string "match" values such as
+"sifive,uart0" to indicate that their driver is compatible with the
+register interface and functionality associated with the relevant
+upstream sifive-blocks commits.  It is expected that most drivers will
+match on these IP block-specific compatible strings.
+
+DT data authors, when writing data for a particular SoC, should
+continue to specify an SoC-specific compatible string value, such as
+"sifive,fu540-c000-uart".  This way, if SoC-specific
+integration-specific bug fixes or workarounds are needed, the kernel
+or other system software can match on this string to apply them.  The
+IP block-specific compatible string (such as "sifive,uart0") should
+then be specified as a subsequent value.
+
+An example of this style:
+
+    compatible = "sifive,fu540-c000-uart", "sifive,uart0";
diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt
new file mode 100644
index 0000000000..55259cf39c
--- /dev/null
+++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt
@@ -0,0 +1,19 @@
+Eckelmann SIOX GPIO bus
+
+Required properties:
+- compatible : "eckelmann,siox-gpio"
+- din-gpios, dout-gpios, dclk-gpios, dld-gpios: references gpios for the
+    corresponding bus signals.
+
+Examples:
+
+        siox {
+                compatible = "eckelmann,siox-gpio";
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinctrl_siox>;
+
+                din-gpios = <&gpio6 11 0>;
+                dout-gpios = <&gpio6 8 0>;
+                dclk-gpios = <&gpio6 9 0>;
+                dld-gpios = <&gpio6 10 0>;
+        };
diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml
new file mode 100644
index 0000000000..abf61c1524
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMBus NGD controller is a light-weight driver responsible for communicating
+  with SLIMBus slaves directly over the bus using messaging interface and
+  communicating with master component residing on ADSP for bandwidth and
+  data-channel management
+
+properties:
+  compatible:
+    enum:
+      - qcom,slim-ngd-v1.5.0        # for MSM8996
+      - qcom,slim-ngd-v2.1.0        # for SDM845
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^slim@[0-9a-f]+$":
+    type: object
+    $ref: slimbus.yaml#
+    description:
+      Each subnode represents an instance of NGD
+
+    properties:
+      reg:
+        maxItems: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - dmas
+  - dma-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    slim-ngd@171c0000 {
+        compatible = "qcom,slim-ngd-v2.1.0";
+        reg = <0x171c0000 0x2c000>;
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+
+        dmas = <&slimbam 3>, <&slimbam 4>;
+        dma-names = "rx", "tx";
+        iommus = <&apps_smmu 0x1806 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        slim@1 {
+            reg = <1>;
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            codec@1,0 {
+                compatible = "slim217,250";
+                reg = <1 0>;
+                slim-ifc-dev = <&wcd9340_ifd>;
+
+                #sound-dai-cells = <1>;
+
+                interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-controller;
+                #interrupt-cells = <1>;
+
+                #clock-cells = <0>;
+                clock-frequency = <9600000>;
+                clock-output-names = "mclk";
+                qcom,micbias1-microvolt = <1800000>;
+                qcom,micbias2-microvolt = <1800000>;
+                qcom,micbias3-microvolt = <1800000>;
+                qcom,micbias4-microvolt = <1800000>;
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+
+                /* Rest of the WCD9340 codec */
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml
new file mode 100644
index 0000000000..883bda58ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/qcom,slim.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC SLIMbus controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMbus controller used when applications processor controls SLIMbus master
+  component.
+
+allOf:
+  - $ref: slimbus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-slim
+      - const: qcom,slim
+
+  reg:
+    items:
+      - description: Physical address of controller register blocks
+      - description: SLEW RATE register
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: slew
+
+  clocks:
+    items:
+      - description: Interface clock for this controller
+      - description: Interrupt for controller core's BAM
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/clock/qcom,lcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        slim@28080000 {
+            compatible = "qcom,apq8064-slim", "qcom,slim";
+            reg = <0x28080000 0x2000>, <0x80207c 4>;
+            reg-names = "ctrl", "slew";
+            interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+            clock-names = "iface", "core";
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            audio-codec@1,0 {
+                compatible = "slim217,60";
+                reg = <1 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
new file mode 100644
index 0000000000..3b8cae9d10
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/slimbus/slimbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SLIM (Serial Low Power Interchip Media) bus
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  SLIMbus is a 2-wire bus, and is used to communicate with peripheral
+  components like audio-codec.
+
+properties:
+  $nodename:
+    pattern: "^slim(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]+,[0-9a-f]+$":
+    type: object
+    description: |
+      Every SLIMbus controller node can contain zero or more child nodes
+      representing slave devices on the bus. Every SLIMbus slave device is
+      uniquely determined by the enumeration address containing 4 fields::
+      Manufacturer ID, Product code, Device index, and Instance value for the
+      device.
+
+      If child node is not present and it is instantiated after device
+      discovery (slave device reporting itself present).
+
+      In some cases it may be necessary to describe non-probeable device
+      details such as non-standard ways of powering up a device. In such cases,
+      child nodes for those devices will be present as slaves of the SLIMbus
+      controller.
+
+    properties:
+      compatible:
+        pattern: "^slim[0-9a-f]+,[0-9a-f]+$"
+
+      reg:
+        maxItems: 1
+        description: |
+          Pair of (device index, instande ID), where::
+           - Device index, which uniquely identifies multiple devices within a
+             single component.
+           - Instance ID, can be used for the cases where multiple devices of
+             the same type or class are attached to the bus.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: true
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/clock/qcom,lcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        slim@28080000 {
+            compatible = "qcom,apq8064-slim", "qcom,slim";
+            reg = <0x28080000 0x2000>, <0x80207c 4>;
+            reg-names = "ctrl", "slew";
+            interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+            clock-names = "iface", "core";
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            audio-codec@1,0 {
+                compatible = "slim217,60";
+                reg = <1 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
new file mode 100644
index 0000000000..cd06865e1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Canvas Video Lookup Table
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Maxime Jourdan <mjourdan@baylibre.com>
+
+description: |
+  A canvas is a collection of metadata that describes a pixel buffer.
+  Those metadata include: width, height, phyaddr, wrapping and block mode.
+  Starting with GXBB the endianness can also be described.
+
+  Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data
+  rather than use the phy addresses directly. For instance, this is the case for
+  the video decoders and the display.
+
+  Amlogic SoCs have 256 canvas.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8-canvas
+              - amlogic,meson8b-canvas
+              - amlogic,meson8m2-canvas
+          - const: amlogic,canvas
+      - const: amlogic,canvas # GXBB and newer SoCs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    canvas: video-lut@48 {
+        compatible = "amlogic,canvas";
+        reg = <0x48 0x14>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
new file mode 100644
index 0000000000..77c2811530
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-clk-measure.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Internal Clock Measurer
+
+description:
+  The Amlogic SoCs contains an IP to measure the internal clocks.
+  The precision is multiple of MHz, useful to debug the clock states.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gx-clk-measure
+      - amlogic,meson8-clk-measure
+      - amlogic,meson8b-clk-measure
+      - amlogic,meson-axg-clk-measure
+      - amlogic,meson-g12a-clk-measure
+      - amlogic,meson-sm1-clk-measure
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-measure@8758 {
+        compatible = "amlogic,meson-gx-clk-measure";
+        reg = <0x8758 0x10>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
new file mode 100644
index 0000000000..16977e4e43
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson System Control registers
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson-gx-hhi-sysctrl
+          - amlogic,meson-gx-ao-sysctrl
+          - amlogic,meson-axg-hhi-sysctrl
+          - amlogic,meson-axg-ao-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    type: object
+
+  power-controller:
+    $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml
+
+  pinctrl:
+    type: object
+
+  phy:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-clkc.yaml#
+
+      required:
+        - power-controller
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-ao-sysctrl
+            - amlogic,meson-axg-ao-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml#
+
+        power-controller: false
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+    then:
+      properties:
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        phy:
+          oneOf:
+            - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml
+            - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+
+required:
+  - compatible
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@c883c000 {
+        compatible = "simple-bus";
+        reg = <0xc883c000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc883c000 0x2000>;
+
+        sysctrl: system-controller@0 {
+            compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x400>;
+
+            clock-controller {
+                compatible = "amlogic,gxbb-clkc";
+                #clock-cells = <1>;
+                clocks = <&xtal>;
+                clock-names = "xtal";
+            };
+
+            power-controller {
+                compatible = "amlogic,meson-gxbb-pwrc";
+                #power-domain-cells = <1>;
+                amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+                resets = <&reset_viu>,
+                         <&reset_venc>,
+                         <&reset_vcbus>,
+                         <&reset_bt656>,
+                         <&reset_dvin>,
+                         <&reset_rdma>,
+                         <&reset_venci>,
+                         <&reset_vencp>,
+                         <&reset_vdac>,
+                         <&reset_vdi6>,
+                         <&reset_vencl>,
+                         <&reset_vid_lock>;
+                reset-names = "viu", "venc", "vcbus", "bt656", "dvin",
+                              "rdma", "venci", "vencp", "vdac", "vdi6",
+                              "vencl", "vid_lock";
+                clocks = <&clk_vpu>, <&clk_vapb>;
+                clock-names = "vpu", "vapb";
+            };
+        };
+    };
+
+    bus@c8100000 {
+        compatible = "simple-bus";
+        reg = <0xc8100000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc8100000 0x100000>;
+
+        sysctrl_AO: system-controller@0 {
+            compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x100>;
+
+            clock-controller {
+                compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+                clocks = <&xtal>, <&clk81>;
+                clock-names = "xtal", "mpeg-clk";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml
new file mode 100644
index 0000000000..51aaf34acb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2018 Google LLC
+# # Copyright (c) 2021 Aspeed Technology Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed UART Routing Controller
+
+maintainers:
+  - Oskar Senft <osk@google.com>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The Aspeed UART routing control allow to dynamically route the inputs for
+  the built-in UARTS and physical serial I/O ports.
+
+  This allows, for example, to connect the output of UART to another UART.
+  This can be used to enable Host <-> BMC communication via UARTs, e.g. to
+  allow access to the Host's serial console.
+
+  This driver is for the BMC side. The sysfs files allow the BMC userspace
+  which owns the system configuration policy, to configure how UARTs and
+  physical serial I/O ports are routed.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-uart-routing
+          - aspeed,ast2500-uart-routing
+          - aspeed,ast2600-uart-routing
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        uart_routing: uart-routing@98 {
+            compatible = "aspeed,ast2600-uart-routing";
+            reg = <0x98 0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml
new file mode 100644
index 0000000000..1a952f5698
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 Cluster Dormant Control
+
+description:
+  The Cluster Dormant Control block keeps the CPU in idle state. A command
+  needs to be sent to this block to bring the CPU into running state.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm23550-cdc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cdc@3fe0e000 {
+        compatible = "brcm,bcm23550-cdc";
+        reg = <0x3fe0e000 0x78>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
new file mode 100644
index 0000000000..e28ef198a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+  The PM block controls power domains and some reset lines, and includes a
+  watchdog timer.
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2835-pm
+          - brcm,bcm2711-pm
+      - const: brcm,bcm2835-pm-wdt
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: pm
+      - const: asb
+      - const: rpivid_asb
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: v3d
+      - const: peri_image
+      - const: h264
+      - const: isp
+
+  system-power-controller:
+    type: boolean
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    watchdog@7e100000 {
+        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+        reg = <0x7e100000 0x114>,
+              <0x7e00a000 0x24>;
+        reg-names = "pm", "asb";
+        clocks = <&clocks BCM2835_CLOCK_V3D>,
+               <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+               <&clocks BCM2835_CLOCK_H264>,
+               <&clocks BCM2835_CLOCK_ISP>;
+        clock-names = "v3d", "peri_image", "h264", "isp";
+        system-power-controller;
+    };
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
new file mode 100644
index 0000000000..e04439b335
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-vchiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VCHIQ firmware services
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+description:
+  The VCHIQ communication channel can be provided by BCM283x and Capri SoCs,
+  to communicate with the VPU-side OS services.
+
+properties:
+  compatible:
+    oneOf:
+      - description: BCM2835 based boards
+        items:
+          - enum:
+              - brcm,bcm2835-vchiq
+
+      - description: BCM2836/BCM2837 based boards
+        items:
+          - enum:
+              - brcm,bcm2836-vchiq
+          - const: brcm,bcm2835-vchiq
+
+  reg:
+    description: Physical base address and length of the doorbell register pair
+    minItems: 1
+
+  interrupts:
+    description: Interrupt number of the doorbell interrupt
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b840 {
+      compatible = "brcm,bcm2835-vchiq";
+      reg = <0x7e00b840 0xf>;
+      interrupts = <0 2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt
new file mode 100644
index 0000000000..30942cf799
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt
@@ -0,0 +1,47 @@
+Raspberry Pi power domain driver
+
+Required properties:
+
+- compatible:		Should be "raspberrypi,bcm2835-power".
+- firmware:		Reference to the RPi firmware device node.
+- #power-domain-cells:	Should be <1>, we providing multiple power domains.
+
+The valid defines for power domain are:
+
+ RPI_POWER_DOMAIN_I2C0
+ RPI_POWER_DOMAIN_I2C1
+ RPI_POWER_DOMAIN_I2C2
+ RPI_POWER_DOMAIN_VIDEO_SCALER
+ RPI_POWER_DOMAIN_VPU1
+ RPI_POWER_DOMAIN_HDMI
+ RPI_POWER_DOMAIN_USB
+ RPI_POWER_DOMAIN_VEC
+ RPI_POWER_DOMAIN_JPEG
+ RPI_POWER_DOMAIN_H264
+ RPI_POWER_DOMAIN_V3D
+ RPI_POWER_DOMAIN_ISP
+ RPI_POWER_DOMAIN_UNICAM0
+ RPI_POWER_DOMAIN_UNICAM1
+ RPI_POWER_DOMAIN_CCP2RX
+ RPI_POWER_DOMAIN_CSI2
+ RPI_POWER_DOMAIN_CPI
+ RPI_POWER_DOMAIN_DSI0
+ RPI_POWER_DOMAIN_DSI1
+ RPI_POWER_DOMAIN_TRANSPOSER
+ RPI_POWER_DOMAIN_CCP2TX
+ RPI_POWER_DOMAIN_CDP
+ RPI_POWER_DOMAIN_ARM
+
+Example:
+
+power: power {
+	compatible = "raspberrypi,bcm2835-power";
+	firmware = <&firmware>;
+	#power-domain-cells = <1>;
+};
+
+Example for using power domain:
+
+&usb {
+       power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt
new file mode 100644
index 0000000000..edd40b796b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt
@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+    May also include "simple-bus" if there are child devices, in which
+    case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+    interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+   standard property of this name.  Required when compatible includes
+   "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node.  Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+	pmu: power-management@d0000 {
+		compatible = "marvell,dove-pmu";
+		reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+		interrupts = <33>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#reset-cells = <1>;
+
+		domains {
+			vpu_domain: vpu-domain {
+				#power-domain-cells = <0>;
+				marvell,pmu_pwr_mask = <0x00000008>;
+				marvell,pmu_iso_mask = <0x00000001>;
+				resets = <&pmu 16>;
+			};
+
+			gpu_domain: gpu-domain {
+				#power-domain-cells = <0>;
+				marvell,pmu_pwr_mask = <0x00000004>;
+				marvell,pmu_iso_mask = <0x00000002>;
+				resets = <&pmu 18>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
new file mode 100644
index 0000000000..2a00e14e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
@@ -0,0 +1,56 @@
+QorIQ DPAA Buffer Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- BMan Portal
+	- Example
+
+BMan Portal Node
+
+Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the BMan
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,bman-portal-<hardware revision>"
+			May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Two regions. The first is the cache-enabled region of
+			the portal. The second is the cache-inhibited region of
+			the portal
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property
+
+EXAMPLE
+
+The example below shows a (P4080) BMan portals container/bus node with two portals
+
+	bman-portals@ff4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0xf 0xf4000000 0x200000>;
+
+		bman-portal@0 {
+			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+			reg = <0x0 0x4000>, <0x100000 0x1000>;
+			interrupts = <105 2 0 0>;
+		};
+		bman-portal@4000 {
+			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+			reg = <0x4000 0x4000>, <0x101000 0x1000>;
+			interrupts = <107 2 0 0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
new file mode 100644
index 0000000000..48eed14076
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -0,0 +1,137 @@
+QorIQ DPAA Buffer Manager Device Tree Bindings
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- BMan Node
+	- BMan Private Memory Node
+	- Example
+
+BMan Node
+
+The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+BMan supports hardware allocation and deallocation of buffers belonging to pools
+originally created by software with configurable depletion thresholds. This
+binding covers the CCSR space programming model
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,bman"
+			May include "fsl,<SoC>-bman"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Registers region within the CCSR address space
+
+The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property. The error interrupt
+
+- fsl,bman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this BMan instance's portals
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+to the respective BMan instance
+
+- fsl,bman
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Description:	List of phandle and DCP index pairs, to the BMan instance
+			to which this device is connected via the DCP
+
+BMan Private Memory Node
+
+BMan requires a contiguous range of physical memory used for the backing store
+for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as
+a node under the /reserved-memory node.
+
+The BMan FBPR memory node must be named "bman-fbpr"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	PPC platforms: Must include "fsl,bman-fbpr"
+			ARM platforms: Must include "shared-dma-pool"
+				       as well as the "no-map" property
+
+The following constraints are relevant to the FBPR private memory:
+	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
+	  16 GiB
+	- The alignment must be a muliptle of the memory size
+
+The size of the FBPR must be chosen by observing the hardware features configured
+via the Reset Configuration Word (RCW) and that are relevant to a specific board
+(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
+etc.). The size configured in the DT must reflect the hardware capabilities and
+not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a BMan FBPR dynamic allocation memory node
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-mem-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+	};
+
+The example below shows a (P4080) BMan CCSR-space node
+
+	bportals: bman-portals@ff4000000 {
+		...
+	};
+
+	crypto@300000 {
+		...
+		fsl,bman = <&bman, 2>;
+		...
+	};
+
+	bman: bman@31a000 {
+		compatible = "fsl,bman";
+		reg = <0x31a000 0x1000>;
+		interrupts = <16 2 1 2>;
+		fsl,liodn = <0x17>;
+		fsl,bman-portals = <&bportals>;
+		memory-region = <&bman_fbpr>;
+	};
+
+	fman@400000 {
+		...
+		fsl,bman = <&bman, 0>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt
new file mode 100644
index 0000000000..160c752484
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt
@@ -0,0 +1,67 @@
+* Freescale Communications Processor Module
+
+NOTE: This is an interim binding, and will likely change slightly,
+as more devices are supported.  The QE bindings especially are
+incomplete.
+
+* Root CPM node
+
+Properties:
+- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
+- reg : A 48-byte region beginning with CPCR.
+
+Example:
+     cpm@119c0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <2>;
+	compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+	reg = <119c0 30>;
+     }
+
+* Properties common to multiple CPM/QE devices
+
+- fsl,cpm-command : This value is ORed with the opcode and command flag
+                    to specify the device on which a CPM command operates.
+
+- fsl,cpm-brg : Indicates which baud rate generator the device
+                is associated with.  If absent, an unused BRG
+                should be dynamically allocated.  If zero, the
+                device uses an external clock rather than a BRG.
+
+- reg : Unless otherwise specified, the first resource represents the
+        scc/fcc/ucc registers, and the second represents the device's
+        parameter RAM region (if it has one).
+
+* Multi-User RAM (MURAM)
+
+The multi-user/dual-ported RAM is expressed as a bus under the CPM node.
+
+Ranges must be set up subject to the following restrictions:
+
+- Children's reg nodes must be offsets from the start of all muram, even
+  if the user-data area does not begin at zero.
+- If multiple range entries are used, the difference between the parent
+  address and the child address must be the same in all, so that a single
+  mapping can cover them all while maintaining the ability to determine
+  CPM-side offsets with pointer subtraction.  It is recommended that
+  multiple range entries not be used.
+- A child address of zero must be translatable, even if no reg resources
+  contain it.
+
+A child "data" node must exist, compatible with "fsl,cpm-muram-data", to
+indicate the portion of muram that is usable by the OS for arbitrary
+purposes.  The data node may have an arbitrary number of reg resources,
+all of which contribute to the allocatable muram pool.
+
+Example, based on mpc8272:
+	muram@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 10000>;
+
+		data@0 {
+			compatible = "fsl,cpm-muram-data";
+			reg = <0 2000 9800 800>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt
new file mode 100644
index 0000000000..4c7d45eaf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt
@@ -0,0 +1,21 @@
+* Baud Rate Generators
+
+Currently defined compatibles:
+fsl,cpm-brg
+fsl,cpm1-brg
+fsl,cpm2-brg
+
+Properties:
+- reg : There may be an arbitrary number of reg resources; BRG
+  numbers are assigned to these in order.
+- clock-frequency : Specifies the base frequency driving
+  the BRG.
+
+Example:
+	brg@119f0 {
+		compatible = "fsl,mpc8272-brg",
+			     "fsl,cpm2-brg",
+			     "fsl,cpm-brg";
+		reg = <119f0 10 115f0 10>;
+		clock-frequency = <d#25000000>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt
new file mode 100644
index 0000000000..87bc604866
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt
@@ -0,0 +1,41 @@
+* I2C
+
+The I2C controller is expressed as a bus under the CPM node.
+
+Properties:
+- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c"
+- reg : On CPM2 devices, the second resource doesn't specify the I2C
+  Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM
+  (typically 0x8afc 0x2).
+- #address-cells : Should be one. The cell is the i2c device address with
+  the r/w bit set to zero.
+- #size-cells : Should be zero.
+- clock-frequency : Can be used to set the i2c clock frequency. If
+  unspecified, a default frequency of 60kHz is being used.
+The following two properties are deprecated. They are only used by legacy
+i2c drivers to find the bus to probe:
+- linux,i2c-index : Can be used to hard code an i2c bus number. By default,
+  the bus number is dynamically assigned by the i2c core.
+- linux,i2c-class : Can be used to override the i2c class. The class is used
+  by legacy i2c device drivers to find a bus in a specific context like
+  system management, video or sound. By default, I2C_CLASS_HWMON (1) is
+  being used. The definition of the classes can be found in
+  include/i2c/i2c.h
+
+Example, based on mpc823:
+
+	i2c@860 {
+		compatible = "fsl,mpc823-i2c",
+			     "fsl,cpm1-i2c";
+		reg = <0x860 0x20 0x3c80 0x30>;
+		interrupts = <16>;
+		interrupt-parent = <&CPM_PIC>;
+		fsl,cpm-command = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@68 {
+			compatible = "dallas,ds1307";
+			reg = <0x68>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt
new file mode 100644
index 0000000000..8e3ee16816
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt
@@ -0,0 +1,18 @@
+* Interrupt Controllers
+
+Currently defined compatibles:
+- fsl,cpm1-pic
+  - only one interrupt cell
+- fsl,pq1-pic
+- fsl,cpm2-pic
+  - second interrupt cell is level/sense:
+    - 2 is falling edge
+    - 8 is active low
+
+Example:
+	interrupt-controller@10c00 {
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <10c00 80>;
+		compatible = "mpc8272-pic", "fsl,cpm2-pic";
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt
new file mode 100644
index 0000000000..74bfda4bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt
@@ -0,0 +1,15 @@
+* USB (Universal Serial Bus Controller)
+
+Properties:
+- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb"
+
+Example:
+	usb@11bc0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,cpm2-usb";
+		reg = <11b60 18 8b00 100>;
+		interrupts = <b 8>;
+		interrupt-parent = <&PIC>;
+		fsl,cpm-command = <2e600000>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
new file mode 100644
index 0000000000..ec888f48ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM QUICC Multichannel Controller (QMC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one
+  serial controller using the same TDM physical interface routed from TSA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc885-scc-qmc
+          - fsl,mpc866-scc-qmc
+      - const: fsl,cpm1-scc-qmc
+
+  reg:
+    items:
+      - description: SCC (Serial communication controller) register base
+      - description: SCC parameter ram base
+      - description: Dual port ram base
+
+  reg-names:
+    items:
+      - const: scc_regs
+      - const: scc_pram
+      - const: dpram
+
+  interrupts:
+    maxItems: 1
+    description: SCC interrupt line in the CPM interrupt controller
+
+  fsl,tsa-serial:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TSA node
+          - enum: [1, 2, 3]
+            description: |
+              TSA serial interface (dt-bindings/soc/cpm1-fsl,tsa.h defines these
+              values)
+               - 1: SCC2
+               - 2: SCC3
+               - 3: SCC4
+    description:
+      Should be a phandle/number pair. The phandle to TSA node and the TSA
+      serial interface to use.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^channel@([0-9]|[1-5][0-9]|6[0-3])$':
+    description:
+      A channel managed by this controller
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 63
+        description:
+          The channel number
+
+      fsl,operational-mode:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [transparent, hdlc]
+        default: transparent
+        description: |
+          The channel operational mode
+            - hdlc: The channel handles HDLC frames
+            - transparent: The channel handles raw data without any processing
+
+      fsl,reverse-data:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The bit order as seen on the channels is reversed,
+          transmitting/receiving the MSB of each octet first.
+          This flag is used only in 'transparent' mode.
+
+      fsl,tx-ts-mask:
+        $ref: /schemas/types.yaml#/definitions/uint64
+        description:
+          Channel assigned Tx time-slots within the Tx time-slots routed by the
+          TSA to this cell.
+
+      fsl,rx-ts-mask:
+        $ref: /schemas/types.yaml#/definitions/uint64
+        description:
+          Channel assigned Rx time-slots within the Rx time-slots routed by the
+          TSA to this cell.
+
+    required:
+      - reg
+      - fsl,tx-ts-mask
+      - fsl,rx-ts-mask
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - fsl,tsa-serial
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/cpm1-fsl,tsa.h>
+
+    qmc@a60 {
+        compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc";
+        reg = <0xa60 0x20>,
+              <0x3f00 0xc0>,
+              <0x2000 0x1000>;
+        reg-names = "scc_regs", "scc_pram", "dpram";
+        interrupts = <27>;
+        interrupt-parent = <&CPM_PIC>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;
+
+        channel@16 {
+            /* Ch16 : First 4 even TS from all routed from TSA */
+            reg = <16>;
+            fsl,mode = "transparent";
+            fsl,reverse-data;
+            fsl,tx-ts-mask = <0x00000000 0x000000aa>;
+            fsl,rx-ts-mask = <0x00000000 0x000000aa>;
+        };
+
+        channel@17 {
+            /* Ch17 : First 4 odd TS from all routed from TSA */
+            reg = <17>;
+            fsl,mode = "transparent";
+            fsl,reverse-data;
+            fsl,tx-ts-mask = <0x00000000 0x00000055>;
+            fsl,rx-ts-mask = <0x00000000 0x00000055>;
+        };
+
+        channel@19 {
+            /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */
+            reg = <19>;
+            fsl,mode = "hdlc";
+            fsl,tx-ts-mask = <0x00000000 0x0000ff00>;
+            fsl,rx-ts-mask = <0x00000000 0x0000ff00>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml
new file mode 100644
index 0000000000..7e51c639a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PowerQUICC CPM Time-slot assigner (TSA) controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The TSA is the time-slot assigner that can be found on some PowerQUICC SoC.
+  Its purpose is to route some TDM time-slots to other internal serial
+  controllers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc885-tsa
+          - fsl,mpc866-tsa
+      - const: fsl,cpm1-tsa
+
+  reg:
+    items:
+      - description: SI (Serial Interface) register base
+      - description: SI RAM base
+
+  reg-names:
+    items:
+      - const: si_regs
+      - const: si_ram
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^tdm@[0-1]$':
+    description:
+      The TDM managed by this controller
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          The TDM number for this TDM, 0 for TDMa and 1 for TDMb
+
+      fsl,common-rxtx-pins:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The hardware can use four dedicated pins for Tx clock, Tx sync, Rx
+          clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync.
+          Without the 'fsl,common-rxtx-pins' property, the four pins are used.
+          With the 'fsl,common-rxtx-pins' property, two pins are used.
+
+      clocks:
+        minItems: 2
+        items:
+          - description: External clock connected to L1RSYNC pin
+          - description: External clock connected to L1RCLK pin
+          - description: External clock connected to L1TSYNC pin
+          - description: External clock connected to L1TCLK pin
+
+      clock-names:
+        minItems: 2
+        items:
+          - const: l1rsync
+          - const: l1rclk
+          - const: l1tsync
+          - const: l1tclk
+
+      fsl,rx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Receive frame sync delay in number of bits.
+          Indicates the delay between the Rx sync and the first bit of the Rx
+          frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,tx-frame-sync-delay-bits:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          Transmit frame sync delay in number of bits.
+          Indicates the delay between the Tx sync and the first bit of the Tx
+          frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
+
+      fsl,clock-falling-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Data is sent on falling edge of the clock (and received on the rising
+          edge). If 'clock-falling-edge' is not present, data is sent on the
+          rising edge (and received on the falling edge).
+
+      fsl,fsync-rising-edge:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Frame sync pulses are sampled with the rising edge of the channel
+          clock. If 'fsync-rising-edge' is not present, pulses are sampled with
+          the falling edge.
+
+      fsl,double-speed-clock:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The channel clock is twice the data rate.
+
+    patternProperties:
+      '^fsl,[rt]x-ts-routes$':
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        description: |
+          A list of tuple that indicates the Tx or Rx time-slots routes.
+        items:
+          items:
+            - description:
+                The number of time-slots
+              minimum: 1
+              maximum: 64
+            - description: |
+                The source (Tx) or destination (Rx) serial interface
+                (dt-bindings/soc/cpm1-fsl,tsa.h defines these values)
+                 - 0: No destination
+                 - 1: SCC2
+                 - 2: SCC3
+                 - 3: SCC4
+                 - 4: SMC1
+                 - 5: SMC2
+              enum: [0, 1, 2, 3, 4, 5]
+        minItems: 1
+        maxItems: 64
+
+    allOf:
+      # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
+      # Else, the 4 clocks must be present.
+      - if:
+          required:
+            - fsl,common-rxtx-pins
+        then:
+          properties:
+            clocks:
+              maxItems: 2
+            clock-names:
+              maxItems: 2
+        else:
+          properties:
+            clocks:
+              minItems: 4
+            clock-names:
+              minItems: 4
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/cpm1-fsl,tsa.h>
+
+    tsa@ae0 {
+        compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
+        reg = <0xae0 0x10>,
+              <0xc00 0x200>;
+        reg-names = "si_regs", "si_ram";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tdm@0 {
+            /* TDMa */
+            reg = <0>;
+
+            clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
+            clock-names = "l1rsync", "l1rclk";
+
+            fsl,common-rxtx-pins;
+            fsl,fsync-rising-edge;
+
+            fsl,tx-ts-routes = <2 0>,             /* TS 0..1 */
+                           <24 FSL_CPM_TSA_SCC4>, /* TS 2..25 */
+                           <1 0>,                 /* TS 26 */
+                           <5 FSL_CPM_TSA_SCC3>;  /* TS 27..31 */
+
+            fsl,rx-ts-routes = <2 0>,             /* TS 0..1 */
+                           <24 FSL_CPM_TSA_SCC4>, /* 2..25 */
+                           <1 0>,                 /* TS 26 */
+                           <5 FSL_CPM_TSA_SCC3>;  /* TS 27..31 */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
new file mode 100644
index 0000000000..cce3cd71e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
@@ -0,0 +1,56 @@
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+On CPM1 devices, all ports are using slightly different register layouts.
+Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+
+On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+Required properties:
+- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
+  "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+  "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+- gpio-controller : Marks the port as GPIO controller.
+Optional properties:
+- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C
+  on CPM1), this item tells which ports have an associated interrupt (ports are
+  listed in the same order as in PCINT register)
+- interrupts : This property provides the list of interrupt for each GPIO having
+  one as described by the fsl,cpm1-gpio-irq-mask property. There should be as
+  many interrupts as number of ones in the mask property. The first interrupt in
+  the list corresponds to the most significant bit of the mask.
+
+Example of four SOC GPIO banks defined as gpio-controller nodes:
+
+	CPM1_PIO_A: gpio-controller@950 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-a";
+		reg = <0x950 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_B: gpio-controller@ab8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-b";
+		reg = <0xab8 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_C: gpio-controller@960 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-c";
+		reg = <0x960 0x10>;
+		fsl,cpm1-gpio-irq-mask = <0x0fff>;
+		interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
+		interrupt-parent = <&CPM_PIC>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_E: gpio-controller@ac8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-e";
+		reg = <0xac8 0x18>;
+		gpio-controller;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
new file mode 100644
index 0000000000..6d2dd8a314
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt
@@ -0,0 +1,130 @@
+* Network
+
+Currently defined compatibles:
+- fsl,cpm1-scc-enet
+- fsl,cpm2-scc-enet
+- fsl,cpm1-fec-enet
+- fsl,cpm2-fcc-enet (third resource is GFEMR)
+- fsl,qe-enet
+
+Example:
+
+	ethernet@11300 {
+		compatible = "fsl,mpc8272-fcc-enet",
+			     "fsl,cpm2-fcc-enet";
+		reg = <11300 20 8400 100 11390 1>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		interrupts = <20 8>;
+		interrupt-parent = <&PIC>;
+		phy-handle = <&PHY0>;
+		fsl,cpm-command = <12000300>;
+	};
+
+* MDIO
+
+Currently defined compatibles:
+fsl,pq1-fec-mdio (reg is same as first resource of FEC device)
+fsl,cpm2-mdio-bitbang (reg is port C registers)
+
+Properties for fsl,cpm2-mdio-bitbang:
+fsl,mdio-pin : pin of port C controlling mdio data
+fsl,mdc-pin : pin of port C controlling mdio clock
+
+Example:
+	mdio@10d40 {
+		compatible = "fsl,mpc8272ads-mdio-bitbang",
+			     "fsl,mpc8272-mdio-bitbang",
+			     "fsl,cpm2-mdio-bitbang";
+		reg = <10d40 14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fsl,mdio-pin = <12>;
+		fsl,mdc-pin = <13>;
+	};
+
+* HDLC
+
+Currently defined compatibles:
+- fsl,ucc-hdlc
+
+Properties for fsl,ucc-hdlc:
+- rx-clock-name
+- tx-clock-name
+	Usage: required
+	Value type: <string>
+	Definition : Must be "brg1"-"brg16" for internal clock source,
+		     Must be "clk1"-"clk24" for external clock source.
+
+- fsl,tdm-interface
+	Usage: optional
+	Value type: <empty>
+	Definition : Specify that hdlc is based on tdm-interface
+
+The property below is dependent on fsl,tdm-interface:
+- fsl,rx-sync-clock
+	Usage: required
+	Value type: <string>
+	Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tx-sync-clock
+	Usage: required
+	Value type: <string>
+	Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tdm-framer-type
+	Usage: required for tdm interface
+	Value type: <string>
+	Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
+		     are not supported.
+
+- fsl,tdm-id
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : number of TDM ID
+
+- fsl,tx-timeslot-mask
+- fsl,rx-timeslot-mask
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : time slot mask for TDM operation. Indicates which time
+		     slots used for transmitting and receiving.
+
+- fsl,siram-entry-id
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : Must be 0,2,4...64. the number of TDM entry.
+
+- fsl,tdm-internal-loopback
+	usage: optional for tdm interface
+	value type: <empty>
+	Definition : Internal loopback connecting on TDM layer.
+- fsl,hmask
+	usage: optional
+	Value type: <u16>
+	Definition: HDLC address recognition. Set to zero to disable
+		    address filtering of packets:
+		    fsl,hmask = /bits/ 16 <0x0000>;
+
+Example for tdm interface:
+
+	ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "clk8";
+		tx-clock-name = "clk9";
+		fsl,rx-sync-clock = "rsync_pin";
+		fsl,tx-sync-clock = "tsync_pin";
+		fsl,tx-timeslot-mask = <0xfffffffe>;
+		fsl,rx-timeslot-mask = <0xfffffffe>;
+		fsl,tdm-framer-type = "e1";
+		fsl,tdm-id = <0>;
+		fsl,siram-entry-id = <0>;
+		fsl,tdm-interface;
+	};
+
+Example for hdlc without tdm interface:
+
+	ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "brg1";
+		tx-clock-name = "brg1";
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
new file mode 100644
index 0000000000..05ec2a838c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt
@@ -0,0 +1,178 @@
+* Freescale QUICC Engine module (QE)
+This represents qe module that is installed on PowerQUICC II Pro.
+
+NOTE:  This is an interim binding; it should be updated to fit
+in with the CPM binding later in this document.
+
+Basically, it is a bus of devices, that could act more or less
+as a complete entity (UCC, USB etc ). All of them should be siblings on
+the "root" qe node, using the common properties from there.
+The description below applies to the qe of MPC8360 and
+more nodes and properties would be extended in the future.
+
+i) Root QE device
+
+Required properties:
+- compatible : should be "fsl,qe";
+- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
+- reg : offset and length of the device registers.
+- bus-frequency : the clock frequency for QUICC Engine.
+- fsl,qe-num-riscs: define how many RISC engines the QE has.
+- fsl,qe-snums: This property has to be specified as '/bits/ 8' value,
+  defining the array of serial number (SNUM) values for the virtual
+  threads.
+
+Optional properties:
+- fsl,firmware-phandle:
+    Usage: required only if there is no fsl,qe-firmware child node
+    Value type: <phandle>
+    Definition: Points to a firmware node (see "QE Firmware Node" below)
+        that contains the firmware that should be uploaded for this QE.
+        The compatible property for the firmware node should say,
+        "fsl,qe-firmware".
+
+Recommended properties
+- brg-frequency : the internal clock source frequency for baud-rate
+  generators in Hz.
+
+Deprecated properties
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use
+  for the threads. Use fsl,qe-snums instead to not only specify the
+  number of snums, but also their values.
+
+Example:
+     qe@e0100000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	#interrupt-cells = <2>;
+	compatible = "fsl,qe";
+	ranges = <0 e0100000 00100000>;
+	reg = <e0100000 480>;
+	brg-frequency = <0>;
+	bus-frequency = <179A7B00>;
+	fsl,qe-snums = /bits/ 8 <
+		0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D
+		0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89
+		0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9
+		0xD8 0xD9 0xE8 0xE9>;
+     }
+
+* Multi-User RAM (MURAM)
+
+Required properties:
+- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
+- mode : the could be "host" or "slave".
+- ranges : Should be defined as specified in 1) to describe the
+   translation of MURAM addresses.
+- data-only : sub-node which defines the address area under MURAM
+   bus that can be allocated as data/parameter
+
+Example:
+
+     muram@10000 {
+	compatible = "fsl,qe-muram", "fsl,cpm-muram";
+	ranges = <0 00010000 0000c000>;
+
+	data-only@0{
+		compatible = "fsl,qe-muram-data",
+			     "fsl,cpm-muram-data";
+		reg = <0 c000>;
+	};
+     };
+
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+- interrupt-controller : this device is a interrupt controller.
+
+Example:
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>;
+	};
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
+  "fsl,t1040-qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+	si1: si@700 {
+		compatible = "fsl,t1040-qe-si";
+		reg = <0x700 0x80>;
+	};
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
+  "fsl,t1040-qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+	siram1: siram@1000 {
+		compatible = "fsl,t1040-qe-siram";
+		reg = <0x1000 0x800>;
+	};
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties.  The node should be placed
+inside a QE node that needs it.  Doing so eliminates the need for a
+fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: A standard property.  Specify a string that indicates what
+          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
+
+   - fsl,firmware
+      Usage: required
+      Value type: <prop-encoded-array>, encoded as an array of bytes
+      Definition: A standard property.  This property contains the firmware
+          binary "blob".
+
+Example:
+	qe1@e0080000 {
+		compatible = "fsl,qe";
+		qe_firmware:qe-firmware {
+			compatible = "fsl,qe-firmware";
+			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+		};
+		...
+	};
+
+	qe2@e0090000 {
+		compatible = "fsl,qe";
+		fsl,firmware-phandle = <&qe_firmware>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt
new file mode 100644
index 0000000000..249db3a15d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt
@@ -0,0 +1,24 @@
+* Uploaded QE firmware
+
+      If a new firmware has been uploaded to the QE (usually by the
+      boot loader), then a 'firmware' child node should be added to the QE
+      node.  This node provides information on the uploaded firmware that
+      device drivers may need.
+
+      Required properties:
+      - id: The string name of the firmware.  This is taken from the 'id'
+            member of the qe_firmware structure of the uploaded firmware.
+            Device drivers can search this string to determine if the
+            firmware they want is already present.
+      - extended-modes: The Extended Modes bitfield, taken from the
+		   firmware binary.  It is a 64-bit number represented
+		   as an array of two 32-bit numbers.
+      - virtual-traps: The virtual traps, taken from the firmware binary.
+		  It is an array of 8 32-bit numbers.
+
+Example:
+	firmware {
+		id = "Soft-UART";
+		extended-modes = <0 0>;
+		virtual-traps = <0 0 0 0 0 0 0 0>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
new file mode 100644
index 0000000000..09b1b05fa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt
@@ -0,0 +1,51 @@
+* Parallel I/O Ports
+
+This node configures Parallel I/O ports for CPUs with QE support.
+The node should reside in the "soc" node of the tree.  For each
+device that using parallel I/O ports, a child node should be created.
+See the definition of the Pin configuration nodes below for more
+information.
+
+Required properties:
+- device_type : should be "par_io".
+- reg : offset to the register set and its length.
+- num-ports : number of Parallel I/O ports
+
+Example:
+par_io@1400 {
+	reg = <1400 100>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	device_type = "par_io";
+	num-ports = <7>;
+	ucc_pin@1 {
+		......
+	};
+
+Note that "par_io" nodes are obsolete, and should not be used for
+the new device trees. Instead, each Par I/O bank should be represented
+via its own gpio-controller node:
+
+Required properties:
+- #gpio-cells : should be "2".
+- compatible : should be "fsl,<chip>-qe-pario-bank",
+  "fsl,mpc8323-qe-pario-bank".
+- reg : offset to the register set and its length.
+- gpio-controller : node to identify gpio controllers.
+
+Example:
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8360-qe-pario-bank",
+		"fsl,mpc8323-qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	  };
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8360-qe-pario-bank",
+			     "fsl,mpc8323-qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	  };
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
new file mode 100644
index 0000000000..5bde8b98a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt
@@ -0,0 +1,57 @@
+* Pin configuration nodes
+
+Required properties:
+- pio-map : array of pin configurations.  Each pin is defined by 6
+  integers.  The six numbers are respectively: port, pin, dir,
+  open_drain, assignment, has_irq.
+  - port : port number of the pin; 0-6 represent port A-G in UM.
+  - pin : pin number in the port.
+  - dir : direction of the pin, should encode as follows:
+
+     0 = The pin is disabled
+     1 = The pin is an output
+     2 = The pin is an input
+     3 = The pin is I/O
+
+  - open_drain : indicates the pin is normal or wired-OR:
+
+     0 = The pin is actively driven as an output
+     1 = The pin is an open-drain driver. As an output, the pin is
+         driven active-low, otherwise it is three-stated.
+
+  - assignment : function number of the pin according to the Pin Assignment
+    tables in User Manual.  Each pin can have up to 4 possible functions in
+    QE and two options for CPM.
+  - has_irq : indicates if the pin is used as source of external
+    interrupts.
+
+Example:
+     ucc_pin@1 {
+	pio-map = <
+	/* port  pin  dir  open_drain  assignment  has_irq */
+		0  3  1  0  1  0 	/* TxD0 */
+		0  4  1  0  1  0 	/* TxD1 */
+		0  5  1  0  1  0 	/* TxD2 */
+		0  6  1  0  1  0 	/* TxD3 */
+		1  6  1  0  3  0 	/* TxD4 */
+		1  7  1  0  1  0 	/* TxD5 */
+		1  9  1  0  2  0 	/* TxD6 */
+		1  a  1  0  2  0 	/* TxD7 */
+		0  9  2  0  1  0 	/* RxD0 */
+		0  a  2  0  1  0 	/* RxD1 */
+		0  b  2  0  1  0 	/* RxD2 */
+		0  c  2  0  1  0 	/* RxD3 */
+		0  d  2  0  1  0 	/* RxD4 */
+		1  1  2  0  2  0 	/* RxD5 */
+		1  0  2  0  2  0 	/* RxD6 */
+		1  4  2  0  2  0 	/* RxD7 */
+		0  7  1  0  1  0 	/* TX_EN */
+		0  8  1  0  1  0 	/* TX_ER */
+		0  f  2  0  1  0 	/* RX_DV */
+		0  10 2  0  1  0 	/* RX_ER */
+		0  0  2  0  1  0 	/* RX_CLK */
+		2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
+		2  8  2  0  1  0>;	/* GTX125 - CLK9 */
+     };
+
+
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
new file mode 100644
index 0000000000..5efb7ac94c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt
@@ -0,0 +1,68 @@
+* UCC (Unified Communications Controllers)
+
+Required properties:
+- device_type : should be "network", "hldc", "uart", "transparent"
+  "bisync", "atm", or "serial".
+- compatible : could be "ucc_geth" or "fsl_atm" and so on.
+- cell-index : the ucc number(1-8), corresponding to UCCx in UM.
+- reg : Offset and length of the register set for the device
+- interrupts : <a b> where a is the interrupt number and b is a
+  field that represents an encoding of the sense and level
+  information for the interrupt.  This should be encoded based on
+  the information in section 2) depending on the type of interrupt
+  controller you have.
+- pio-handle : The phandle for the Parallel I/O port configuration.
+- port-number : for UART drivers, the port number to use, between 0 and 3.
+  This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0.
+  The port number is added to the minor number of the device.  Unlike the
+  CPM UART driver, the port-number is required for the QE UART driver.
+- soft-uart : for UART drivers, if specified this means the QE UART device
+  driver should use "Soft-UART" mode, which is needed on some SOCs that have
+  broken UART hardware.  Soft-UART is provided via a microcode upload.
+- rx-clock-name: the UCC receive clock source
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- tx-clock-name: the UCC transmit clock source
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+The following two properties are deprecated.  rx-clock has been replaced
+with rx-clock-name, and tx-clock has been replaced with tx-clock-name.
+Drivers that currently use the deprecated properties should continue to
+do so, in order to support older device trees, but they should be updated
+to check for the new properties first.
+- rx-clock : represents the UCC receive clock source.
+  0x00 : clock source is disabled;
+  0x1~0x10 : clock source is BRG1~BRG16 respectively;
+  0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
+- tx-clock: represents the UCC transmit clock source;
+  0x00 : clock source is disabled;
+  0x1~0x10 : clock source is BRG1~BRG16 respectively;
+  0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively.
+
+Required properties for network device_type:
+- mac-address : list of bytes representing the ethernet address.
+- phy-handle : The phandle for the PHY connected to this controller.
+
+Recommended properties:
+- phy-connection-type : a string naming the controller/PHY interface type,
+  i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
+  Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
+  "tbi", or "rtbi".
+
+Example:
+	ucc@2000 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		cell-index = <1>;
+		reg = <2000 200>;
+		interrupts = <a0 0>;
+		interrupt-parent = <700>;
+		mac-address = [ 00 04 9f 00 23 23 ];
+		rx-clock = "none";
+		tx-clock = "clk9";
+		phy-handle = <212000>;
+		phy-connection-type = "gmii";
+		pio-handle = <140001>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
new file mode 100644
index 0000000000..da13999337
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
@@ -0,0 +1,36 @@
+Freescale QUICC Engine USB Controller
+
+Required properties:
+- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
+- reg : the first two cells should contain usb registers location and
+  length, the next two two cells should contain PRAM location and
+  length.
+- interrupts : should contain USB interrupt.
+- fsl,fullspeed-clock : specifies the full speed USB clock source:
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- fsl,lowspeed-clock : specifies the low speed USB clock source:
+  "none": clock source is disabled
+  "brg1" through "brg16": clock source is BRG1-BRG16, respectively
+  "clk1" through "clk24": clock source is CLK1-CLK24, respectively
+- hub-power-budget : USB power budget for the root hub, in mA.
+- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
+  USBRN, SPEED (optional), and POWER (optional).
+
+Example:
+
+usb@6c0 {
+	compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
+	reg = <0x6c0 0x40 0x8b00 0x100>;
+	interrupts = <11>;
+	interrupt-parent = <&qeic>;
+	fsl,fullspeed-clock = "clk21";
+	gpios = <&qe_pio_b  2 0 /* USBOE */
+		 &qe_pio_b  3 0 /* USBTP */
+		 &qe_pio_b  8 0 /* USBTN */
+		 &qe_pio_b  9 0 /* USBRP */
+		 &qe_pio_b 11 0 /* USBRN */
+		 &qe_pio_e 20 0 /* SPEED */
+		 &qe_pio_e 21 0 /* POWER */>;
+};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt
new file mode 100644
index 0000000000..2ea76d9d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt
@@ -0,0 +1,32 @@
+* Serial
+
+Currently defined compatibles:
+- fsl,cpm1-smc-uart
+- fsl,cpm2-smc-uart
+- fsl,cpm1-scc-uart
+- fsl,cpm2-scc-uart
+- fsl,qe-uart
+
+Modem control lines connected to GPIO controllers are listed in the gpios
+property as described in booting-without-of.txt, section IX.1 in the following
+order:
+
+CTS, RTS, DCD, DSR, DTR, and RI.
+
+The gpios property is optional and can be left out when control lines are
+not used.
+
+Example:
+
+	serial@11a00 {
+		device_type = "serial";
+		compatible = "fsl,mpc8272-scc-uart",
+			     "fsl,cpm2-scc-uart";
+		reg = <11a00 20 8000 100>;
+		interrupts = <28 8>;
+		interrupt-parent = <&PIC>;
+		fsl,cpm-brg = <1>;
+		fsl,cpm-command = <00800000>;
+		gpios = <&gpio_c 15 0
+			 &gpio_d 29 0>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt
new file mode 100644
index 0000000000..8823c86c80
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt
@@ -0,0 +1,17 @@
+* Serial
+
+Required Properties:
+compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be
+"fsl,t1040-ucc-uart".
+port-number : port number of UCC-UART
+tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
+		   should be "clk1"-"clk28" for external clock source.
+
+Example:
+
+	ucc_serial: ucc@2200 {
+		compatible = "fsl,t1040-ucc-uart";
+		port-number = <0>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
new file mode 100644
index 0000000000..397f75909b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Device Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  DCFG is the device configuration unit, that provides general purpose
+  configuration and status for the device. Such as setting the secondary
+  core start address and release the secondary core from holdoff and
+  startup.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1012a-dcfg
+              - fsl,ls1021a-dcfg
+              - fsl,ls1043a-dcfg
+              - fsl,ls1046a-dcfg
+              - fsl,ls1088a-dcfg
+              - fsl,ls2080a-dcfg
+              - fsl,lx2160a-dcfg
+          - const: syscon
+
+      - items:
+          - enum:
+              - fsl,ls1028a-dcfg
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^clock-controller@[0-9a-z]+$":
+    $ref: /schemas/clock/fsl,flexspi-clock.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1ee0000 {
+        compatible = "fsl,ls1021a-dcfg", "syscon";
+        reg = <0x1ee0000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
new file mode 100644
index 0000000000..8d088b5fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Supplemental Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  SCFG is the supplemental configuration unit, that provides SoC specific
+  configuration and status registers for the chip. Such as getting PEX port
+  status.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1012a-scfg
+          - fsl,ls1021a-scfg
+          - fsl,ls1028a-scfg
+          - fsl,ls1043a-scfg
+          - fsl,ls1046a-scfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@[a-z0-9]+$":
+    $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1570000 {
+        compatible = "fsl,ls1021a-scfg", "syscon";
+        reg = <0x1570000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/guts.txt b/Documentation/devicetree/bindings/soc/fsl/guts.txt
new file mode 100644
index 0000000000..07adca914d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -0,0 +1,44 @@
+* Global Utilities Block
+
+The global utilities block controls power management, I/O device
+enabling, power-on-reset configuration monitoring, general-purpose
+I/O signal configuration, alternate function selection for multiplexed
+signals, and clock control.
+
+Required properties:
+
+ - compatible : Should define the compatible device type for
+   global-utilities.
+   Possible compatibles:
+	"fsl,qoriq-device-config-1.0"
+	"fsl,qoriq-device-config-2.0"
+	"fsl,<chip>-device-config"
+	"fsl,<chip>-guts"
+ - reg : Offset and length of the register set for the device.
+
+Recommended properties:
+
+ - fsl,has-rstcr : Indicates that the global utilities register set
+   contains a functioning "reset control register" (i.e. the board
+   is wired to reset upon setting the HRESET_REQ bit in this register).
+
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+   registers, for those SOCs that have a PAMU device.
+
+ - little-endian : Indicates that the global utilities block is little
+   endian. The default is big endian.
+
+Examples:
+	global-utilities@e0000 {	/* global utilities block */
+		compatible = "fsl,mpc8548-guts";
+		reg = <e0000 1000>;
+		fsl,has-rstcr;
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
new file mode 100644
index 0000000000..5a34f3ab7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
@@ -0,0 +1,134 @@
+QorIQ DPAA Queue Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- QMan Portal
+	- Example
+
+QMan Portal Node
+
+Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the QMan
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman-portal-<hardware revision>"
+			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Two regions. The first is the cache-enabled region of
+			the portal. The second is the cache-inhibited region of
+			the portal
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+			(FLIODN)
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- cell-index
+	Usage:		Required
+	Value type:	<u32>
+	Definition:	The hardware index of the channel. This can also be
+			determined by dividing any of the channel's 8 work queue
+			IDs by 8
+
+In addition to these properties the qman-portals should have sub-nodes to
+represent the HW devices/portals that are connected to the software portal
+described here
+
+The currently supported sub-nodes are:
+	* fman0
+	* fman1
+	* pme
+	* crypto
+
+These subnodes should have the following properties:
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+- dev-handle
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	The phandle to the particular hardware device that this
+			portal is connected to.
+
+EXAMPLE
+
+The example below shows a (P4080) QMan portals container/bus node with two portals
+
+	qman-portals@ff4200000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0xf 0xf4200000 0x200000>;
+
+		qman-portal@0 {
+			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+			reg = <0 0x4000>, <0x100000 0x1000>;
+			interrupts = <104 2 0 0>;
+			fsl,liodn = <1 2>;
+			fsl,qman-channel-id = <0>;
+
+			fman0 {
+				fsl,liodn = <0x21>;
+				dev-handle = <&fman0>;
+			};
+			fman1 {
+				fsl,liodn = <0xa1>;
+				dev-handle = <&fman1>;
+			};
+			crypto {
+				fsl,liodn = <0x41 0x66>;
+				dev-handle = <&crypto>;
+			};
+		};
+		qman-portal@4000 {
+			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+			reg = <0x4000 0x4000>, <0x101000 0x1000>;
+			interrupts = <106 2 0 0>;
+			fsl,liodn = <3 4>;
+			cell-index = <1>;
+
+			fman0 {
+				fsl,liodn = <0x22>;
+				dev-handle = <&fman0>;
+			};
+			fman1 {
+				fsl,liodn = <0xa2>;
+				dev-handle = <&fman1>;
+			};
+			crypto {
+				fsl,liodn = <0x42 0x67>;
+				dev-handle = <&crypto>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
new file mode 100644
index 0000000000..ee96afd2af
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -0,0 +1,187 @@
+QorIQ DPAA Queue Manager Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- QMan Node
+	- QMan Private Memory Nodes
+	- Example
+
+QMan Node
+
+The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+DPAA logic modules, maintains packet ordering within flows. Besides providing
+flow-level queuing, is also responsible for congestion management functions such
+as RED/WRED, congestion notifications and tail discards. This binding covers the
+CCSR space programming model
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman"
+			May include "fsl,<SoC>-qman"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Registers region within the CCSR address space
+
+The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property. The error interrupt
+
+- fsl,qman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this QMan instance's portals
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- clocks
+	Usage:		See clock-bindings.txt and qoriq-clock.txt
+	Value type:	<prop-encoded-array>
+	Definition:	Reference input clock. Its frequency is half of the
+			platform clock
+- memory-regions
+	Usage:		Required for ARM
+	Value type:	<phandle array>
+	Definition:	List of phandles referencing the QMan private memory
+			nodes (described below). The qman-fqd node must be
+			first followed by qman-pfdr node. Only used on ARM
+
+Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
+to the respective QMan instance
+
+- fsl,qman
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Description:	List of phandle and DCP index pairs, to the QMan instance
+			to which this device is connected via the DCP
+
+QMan Private Memory Nodes
+
+QMan requires two contiguous range of physical memory used for the backing store
+for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+This memory is reserved/allocated as a node under the /reserved-memory node.
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+The QMan FQD memory node must be named "qman-fqd"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	PPC platforms: Must include "fsl,qman-fqd"
+			ARM platforms: Must include "shared-dma-pool"
+				       as well as the "no-map" property
+
+The QMan PFDR memory node must be named "qman-pfdr"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	PPC platforms: Must include "fsl,qman-pfdr"
+			ARM platforms: Must include "shared-dma-pool"
+				       as well as the "no-map" property
+
+The following constraints are relevant to the FQD and PFDR private memory:
+	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+	  1 GiB
+	- The alignment must be a muliptle of the memory size
+
+The size of the FQD and PFDP must be chosen by observing the hardware features
+configured via the Reset Configuration Word (RCW) and that are relevant to a
+specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+FMan ports, etc.). The size configured in the DT must reflect the hardware
+capabilities and not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+			no-map;
+		};
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+The example below shows a (P4080) QMan CCSR-space node
+
+	qportals: qman-portals@ff4200000 {
+		...
+	};
+
+	clockgen: global-utilities@e1000 {
+		...
+		sysclk: sysclk {
+			...
+		};
+		...
+		platform_pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
+		...
+	};
+
+	crypto@300000 {
+		...
+		fsl,qman = <&qman, 2>;
+		...
+	};
+
+	qman: qman@318000 {
+		compatible = "fsl,qman";
+		reg = <0x318000 0x1000>;
+		interrupts = <16 2 1 3>
+		fsl,liodn = <0x16>;
+		fsl,qman-portals = <&qportals>;
+		memory-region = <&qman_fqd &qman_pfdr>;
+		clocks = <&platform_pll 1>;
+	};
+
+	fman@400000 {
+		...
+		fsl,qman = <&qman, 0>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
new file mode 100644
index 0000000000..5a33619d88
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -0,0 +1,69 @@
+* Run Control and Power Management
+-------------------------------------------
+The RCPM performs all device-level tasks associated with device run control
+and power management.
+
+Required properites:
+  - reg : Offset and length of the register set of the RCPM block.
+  - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the
+	fsl,rcpm-wakeup property.
+  - compatible : Must contain a chip-specific RCPM block compatible string
+	and (if applicable) may contain a chassis-version RCPM compatible
+	string. Chip-specific strings are of the form "fsl,<chip>-rcpm",
+	such as:
+	* "fsl,p2041-rcpm"
+	* "fsl,p5020-rcpm"
+	* "fsl,t4240-rcpm"
+
+	Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>",
+	such as:
+	* "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm
+	* "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm
+	* "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm
+	* "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+Chassis Version		Example Chips
+---------------		-------------------------------
+1.0				p4080, p5020, p5040, p2041, p3041
+2.0				t4240, b4860, b4420
+2.1				t1040,
+2.1+				ls1021a, ls1012a, ls1043a, ls1046a
+
+Optional properties:
+ - little-endian : RCPM register block is Little Endian. Without it RCPM
+   will be Big Endian (default case).
+
+Example:
+The RCPM node for T4240:
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+		#fsl,rcpm-wakeup-cells = <2>;
+	};
+
+* Freescale RCPM Wakeup Source Device Tree Bindings
+-------------------------------------------
+Required fsl,rcpm-wakeup property should be added to a device node if the device
+can be used as a wakeup source.
+
+  - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR
+	register cells. The number of IPPDEXPCR register cells is defined in
+	"#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is
+	the bit mask that should be set in IPPDEXPCR0, and the second register
+	cell is for IPPDEXPCR1, and so on.
+
+	Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a
+	mechanism for keeping certain blocks awake during STANDBY and MEM, in
+	order to use them as wake-up sources.
+
+Example:
+	lpuart0: serial@2950000 {
+		compatible = "fsl,ls1021a-lpuart";
+		reg = <0x0 0x2950000 0x0 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sysclk>;
+		clock-names = "ipg";
+		fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
new file mode 100644
index 0000000000..80d99861fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX AHB to IP Bridge
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  This particular peripheral is designed as the bridge between
+  AHB bus and peripherals with the lower bandwidth IP Slave (IPS)
+  buses.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,aips-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: fsl,aips-bus
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    bus@30000000 {
+      compatible = "fsl,aips-bus", "simple-bus";
+      reg = <0x30000000 0x400000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
new file mode 100644
index 0000000000..1da1b758b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IOMUX Controller General Purpose Registers
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  i.MX Processors have an IOMUXC General Purpose Register group for
+  various System Settings
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,imx8mq-iomuxc-gpr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - fsl,imx8mm-iomuxc-gpr
+              - fsl,imx8mn-iomuxc-gpr
+              - fsl,imx8mp-iomuxc-gpr
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  mux-controller:
+    type: object
+    $ref: /schemas/mux/reg-mux.yaml
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc_gpr: syscon@30340000 {
+        compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
+        reg = <0x30340000 0x10000>;
+
+        mux: mux-controller {
+            compatible = "mmio-mux";
+            #mux-control-cells = <1>;
+            mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml
new file mode 100644
index 0000000000..a02a09d574
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MM DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mm-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: csi-bridge
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 10
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: csi-bridge-axi
+      - const: csi-bridge-apb
+      - const: csi-bridge-core
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/power/imx8mm-power.h>
+
+    blk-ctrl@32e28000 {
+      compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_mipi>, <&pgc_mipi>;
+      power-domain-names = "bus", "csi-bridge", "lcdif",
+                           "mipi-dsi", "mipi-csi";
+      clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MM_CLK_CSI1_ROOT>,
+               <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MM_CLK_DISP_ROOT>,
+               <&clk IMX8MM_CLK_DSI_CORE>,
+               <&clk IMX8MM_CLK_DSI_PHY_REF>,
+               <&clk IMX8MM_CLK_CSI1_CORE>,
+               <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+       clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
new file mode 100644
index 0000000000..25109376d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MM VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mm-vpu-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 4
+
+  power-domain-names:
+    maxItems: 4
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    maxItems: 3
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mm-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: H1 encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: h1
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: H1 encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: H1 encoder power domain
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: VC8000E encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: VC8000E encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: VC8000E encoder interconnect
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/power/imx8mm-power.h>
+
+    blk-ctrl@38330000 {
+      compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+      reg = <0x38330000 0x100>;
+      power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+                      <&pgc_vpu_g2>, <&pgc_vpu_h1>;
+      power-domain-names = "bus", "g1", "g2", "h1";
+      clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+               <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+      clock-names = "g1", "g2", "h1";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
new file mode 100644
index 0000000000..eeec9965b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MN DISP blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display and MIPI CSI
+  peripherals located in the DISP domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mn-disp-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 5
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: isi
+      - const: lcdif
+      - const: mipi-dsi
+      - const: mipi-csi
+
+  clocks:
+    minItems: 11
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: disp_axi
+      - const: disp_apb
+      - const: disp_axi_root
+      - const: disp_apb_root
+      - const: lcdif-axi
+      - const: lcdif-apb
+      - const: lcdif-pix
+      - const: dsi-pclk
+      - const: dsi-ref
+      - const: csi-aclk
+      - const: csi-pclk
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    blk-ctrl@32e28000 {
+      compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+      reg = <0x32e28000 0x100>;
+      power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+                      <&pgc_dispmix>, <&pgc_mipi>,
+                      <&pgc_mipi>;
+      power-domain-names = "bus", "isi", "lcdif", "mipi-dsi",
+                           "mipi-csi";
+      clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+               <&clk IMX8MN_CLK_DISP_APB>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+               <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+               <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+               <&clk IMX8MN_CLK_DSI_CORE>,
+               <&clk IMX8MN_CLK_DSI_PHY_REF>,
+               <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+               <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+       clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root",
+                     "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
+                     "dsi-ref", "csi-aclk", "csi-pclk";
+       #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
new file mode 100644
index 0000000000..1be4ce2a45
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HDMI blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display pipeline
+  peripherals located in the HDMI domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hdmi-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 8
+    maxItems: 8
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: irqsteer
+      - const: lcdif
+      - const: pai
+      - const: pvi
+      - const: trng
+      - const: hdmi-tx
+      - const: hdmi-tx-phy
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: ref_266m
+      - const: ref_24m
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: hrv
+      - const: lcdif-hdmi
+      - const: hdcp
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32fc0000 {
+        compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+        reg = <0x32fc0000 0x23c>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_ROOT>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_HDMI_24M>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m";
+        power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+        power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
+                             "hdmi-tx", "hdmi-tx-phy";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
new file mode 100644
index 0000000000..4214c1ab49
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HSIO blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the high-speed IO
+  (USB an PCIe) peripherals located in the HSIO domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hsio-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 6
+    maxItems: 6
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: usb
+      - const: usb-phy1
+      - const: usb-phy2
+      - const: pcie
+      - const: pcie-phy
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: usb
+      - const: pcie
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: noc-pcie
+      - const: usb1
+      - const: usb2
+      - const: pcie
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32f10000 {
+        compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+        reg = <0x32f10000 0x24>;
+        clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+                 <&clk IMX8MP_CLK_PCIE_ROOT>;
+        clock-names = "usb", "pcie";
+        power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+                        <&pgc_usb1_phy>, <&pgc_usb2_phy>,
+                        <&pgc_hsiomix>, <&pgc_pcie_phy>;
+        power-domain-names = "bus", "usb", "usb-phy1",
+                             "usb-phy2", "pcie", "pcie-phy";
+        #power-domain-cells = <1>;
+        #clock-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
new file mode 100644
index 0000000000..ea9aa876ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP Media Block Control
+
+maintainers:
+  - Paul Elder <paul.elder@ideasonboard.com>
+
+description:
+  The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral
+  providing access to the NoC and ensuring proper power sequencing of the
+  peripherals within the MEDIAMIX domain.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 10
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: mipi-dsi1
+      - const: mipi-csi1
+      - const: lcdif1
+      - const: isi
+      - const: mipi-csi2
+      - const: lcdif2
+      - const: isp
+      - const: dwe
+      - const: mipi-dsi2
+
+  clocks:
+    items:
+      - description: The APB clock
+      - description: The AXI clock
+      - description: The pixel clock for the first CSI2 receiver (aclk)
+      - description: The pixel clock for the second CSI2 receiver (aclk)
+      - description: The pixel clock for the first LCDIF (pix_clk)
+      - description: The pixel clock for the second LCDIF (pix_clk)
+      - description: The core clock for the ISP (clk)
+      - description: The MIPI-PHY reference clock used by DSI
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: cam1
+      - const: cam2
+      - const: disp1
+      - const: disp2
+      - const: isp
+      - const: phy
+
+  interconnects:
+    maxItems: 8
+
+  interconnect-names:
+    items:
+      - const: lcdif-rd
+      - const: lcdif-wr
+      - const: isi0
+      - const: isi1
+      - const: isi2
+      - const: isp0
+      - const: isp1
+      - const: dwe
+
+  bridge@5c:
+    type: object
+    $ref: /schemas/display/bridge/fsl,ldb.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - '#power-domain-cells'
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32ec0000 {
+        compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
+        reg = <0x32ec0000 0x138>;
+        power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>,
+                        <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>,
+                        <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>,
+                        <&mipi_phy2_pd>;
+        power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi",
+                             "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2";
+        clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+        clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2",
+                      "isp", "phy";
+        #power-domain-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml
new file mode 100644
index 0000000000..ea5c90c6a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mq-vpu-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 3
+    maxItems: 3
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: g1
+      - const: g2
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: g1
+      - const: g2
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/power/imx8mq-power.h>
+
+    blk-ctrl@38320000 {
+      compatible = "fsl,imx8mq-vpu-blk-ctrl";
+      reg = <0x38320000 0x100>;
+      power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+      power-domain-names = "bus", "g1", "g2";
+      clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+      clock-names = "g1", "g2";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
new file mode 100644
index 0000000000..b3554e7f9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Media blk-ctrl
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  The i.MX93 MEDIAMIX domain contains control and status registers known
+  as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include
+  clocking, reset, and miscellaneous top-level controls for peripherals
+  within the MEDIAMIX domain
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: nic
+      - const: disp
+      - const: cam
+      - const: pxp
+      - const: lcdif
+      - const: isi
+      - const: csi
+      - const: dsi
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    system-controller@4ac10000 {
+      compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+      reg = <0x4ac10000 0x10000>;
+      power-domains = <&mediamix>;
+      clocks = <&clk IMX93_CLK_MEDIA_APB>,
+               <&clk IMX93_CLK_MEDIA_AXI>,
+               <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+               <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+               <&clk IMX93_CLK_CAM_PIX>,
+               <&clk IMX93_CLK_PXP_GATE>,
+               <&clk IMX93_CLK_LCDIF_GATE>,
+               <&clk IMX93_CLK_ISI_GATE>,
+               <&clk IMX93_CLK_MIPI_CSI_GATE>,
+               <&clk IMX93_CLK_MIPI_DSI_GATE>;
+               clock-names = "apb", "axi", "nic", "disp", "cam",
+                             "pxp", "lcdif", "isi", "csi", "dsi";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml
new file mode 100644
index 0000000000..9ce8d8b427
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 System Reset Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The System Reset Controller (SRC) is responsible for the generation of
+  all the system reset signals and boot argument latching.
+
+  Its main functions are as follows,
+  - Deals with all global system reset sources from other modules,
+    and generates global system reset.
+  - Responsible for power gating of MIXs (Slices) and their memory
+    low power control.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "power-domain@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: fsl,imx93-src-slice
+
+      '#power-domain-cells':
+        const: 0
+
+      reg:
+        items:
+          - description: mix slice register region
+          - description: mem slice register region
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled
+          during domain power-up sequencing to ensure reset
+          propagation into devices located inside this power domain.
+        minItems: 1
+        maxItems: 5
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - reg
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    system-controller@44460000 {
+        compatible = "fsl,imx93-src", "syscon";
+        reg = <0x44460000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        mediamix: power-domain@0 {
+            compatible = "fsl,imx93-src-slice";
+            reg = <0x44462400 0x400>, <0x44465800 0x400>;
+            #power-domain-cells = <0>;
+            clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+                     <&clk IMX93_CLK_MEDIA_APB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
new file mode 100644
index 0000000000..effcc72f94
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Series SoC
+
+maintainers:
+  - Alice Guo <alice.guo@nxp.com>
+
+description: |
+  NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be
+  obtained.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8mm
+          - fsl,imx8mn
+          - fsl,imx8mp
+          - fsl,imx8mq
+  required:
+    - compatible
+
+patternProperties:
+  "^soc@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - fsl,imx8mm-soc
+              - fsl,imx8mn-soc
+              - fsl,imx8mp-soc
+              - fsl,imx8mq-soc
+          - const: simple-bus
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      ranges: true
+
+      dma-ranges: true
+
+      nvmem-cells:
+        maxItems: 1
+        description: Phandle to the SOC Unique ID provided by a nvmem node
+
+      nvmem-cell-names:
+        const: soc_unique_id
+
+    required:
+      - compatible
+      - nvmem-cells
+      - nvmem-cell-names
+
+    additionalProperties:
+      type: object
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "FSL i.MX8MM EVK board";
+        compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        soc@0 {
+            compatible = "fsl,imx8mm-soc", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0x0 0x0 0x0 0x3e000000>;
+            nvmem-cells = <&imx8mm_uid>;
+            nvmem-cell-names = "soc_unique_id";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
new file mode 100644
index 0000000000..ceb81646fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel HPS Copy Engine
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+description: |
+  The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy
+  a bootable image from host memory to HPS DDR.  Additionally, there is a
+  register the HPS can use to indicate the state of booting the copied image as
+  well as a keep-a-live indication to the host.
+
+properties:
+  compatible:
+    const: intel,hps-copy-engine
+
+  '#dma-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@80000000 {
+        compatible = "simple-bus";
+        reg = <0x80000000 0x60000000>,
+              <0xf9000000 0x00100000>;
+        reg-names = "axi_h2f", "axi_h2f_lw";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+        dma-controller@0 {
+            compatible = "intel,hps-copy-engine";
+            reg = <0x00000000 0x00000000 0x00001000>;
+            #dma-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
new file mode 100644
index 0000000000..a64406ca17
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2020 Antmicro <www.antmicro.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX SoC Controller driver
+
+description: |
+  This is the SoC Controller driver for the LiteX SoC Builder.
+  Its purpose is to verify LiteX CSR (Control&Status Register) access
+  operations and provide functions for other drivers to read/write CSRs
+  and to check if those accessors are ready to be used.
+
+maintainers:
+  - Karol Gugala <kgugala@antmicro.com>
+  - Mateusz Holenko <mholenko@antmicro.com>
+
+properties:
+  compatible:
+    const: litex,soc-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc_ctrl0: soc-controller@f0000000 {
+        compatible = "litex,soc-controller";
+        reg = <0xf0000000 0xc>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
new file mode 100644
index 0000000000..510f6cb0f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 Power Manager controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - loongson,ls2k1000-pmc
+              - loongson,ls2k2000-pmc
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  loongson,suspend-address:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      The "loongson,suspend-address" is a deep sleep state (Suspend To
+      RAM) firmware entry address which was jumped from kernel and it's
+      value was dependent on specific platform firmware code. In
+      addition, the PM need according to it to indicate that current
+      SoC whether support Suspend To RAM.
+
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    power-management@1fe27000 {
+        compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+        reg = <0x1fe27000 0x58>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        loongson,suspend-address = <0x0 0x1c000500>;
+
+        syscon-reboot {
+            compatible = "syscon-reboot";
+            offset = <0x30>;
+            mask = <0x1>;
+        };
+
+        syscon-poweroff {
+            compatible = "syscon-poweroff";
+            regmap = <&pmc>;
+            offset = <0x14>;
+            mask = <0x3c00>;
+            value = <0x3c00>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
new file mode 100644
index 0000000000..99e2caafea
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# # Copyright 2020 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/devapc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Device Access Permission Control driver
+
+description: |
+  MediaTek bus fabric provides TrustZone security support and data
+  protection to prevent slaves from being accessed by unexpected masters.
+  The security violation is logged and sent to the processor for further
+  analysis and countermeasures.
+
+maintainers:
+  - Neal Liu <neal.liu@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-devapc
+      - mediatek,mt8186-devapc
+
+  reg:
+    description: The base address of devapc register bank
+    maxItems: 1
+
+  interrupts:
+    description: A single interrupt specifier
+    maxItems: 1
+
+  clocks:
+    description: Contains module clock source and clock names
+    maxItems: 1
+
+  clock-names:
+    description: Names of the clocks list in clocks property
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt6779-clk.h>
+
+    devapc: devapc@10207000 {
+      compatible = "mediatek,mt6779-devapc";
+      reg = <0x10207000 0x1000>;
+      interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+      clock-names = "devapc-infra-clock";
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 0000000000..4380b98b0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek color correction
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek color correction with 3X3 matrix.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-ccorr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_ccorr: mdp3-ccorr@1401c000 {
+      compatible = "mediatek,mt8183-mdp3-ccorr";
+      reg = <0x1401c000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+                            <CMDQ_EVENT_MDP_CCORR_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_CCORR>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml
new file mode 100644
index 0000000000..f0fa92b04b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The MediaTek wo-ccif provides a configuration interface for WED WO
+  controller used to perform offload rx packet processing (e.g. 802.11
+  aggregation packet reordering or rx header translation) on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wo-ccif
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      syscon@151a5000 {
+        compatible = "mediatek,mt7986-wo-ccif", "syscon";
+        reg = <0 0x151a5000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
new file mode 100644
index 0000000000..ba2014a872
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mutex
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek mutex, namely MUTEX, is used to send the triggers signals called
+  Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
+  data path or MDP data path.
+  In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
+  the shadow register.
+  MUTEX device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-disp-mutex
+      - mediatek,mt2712-disp-mutex
+      - mediatek,mt6795-disp-mutex
+      - mediatek,mt8167-disp-mutex
+      - mediatek,mt8173-disp-mutex
+      - mediatek,mt8183-disp-mutex
+      - mediatek,mt8186-disp-mutex
+      - mediatek,mt8186-mdp3-mutex
+      - mediatek,mt8188-disp-mutex
+      - mediatek,mt8192-disp-mutex
+      - mediatek,mt8195-disp-mutex
+      - mediatek,mt8195-vpp-mutex
+      - mediatek,mt8365-disp-mutex
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: MUTEX Clock
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-disp-mutex
+              - mediatek,mt2712-disp-mutex
+              - mediatek,mt6795-disp-mutex
+              - mediatek,mt8173-disp-mutex
+              - mediatek,mt8186-disp-mutex
+              - mediatek,mt8186-mdp3-mutex
+              - mediatek,mt8192-disp-mutex
+              - mediatek,mt8195-disp-mutex
+    then:
+      required:
+        - clocks
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mutex: mutex@14020000 {
+            compatible = "mediatek,mt8173-disp-mutex";
+            reg = <0 0x14020000 0 0x1000>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_MUTEX_32K>;
+            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
new file mode 100644
index 0000000000..a06ac21774
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+  On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+  is not directly visible to the CPU, but only through the PMIC wrapper
+  inside the SoC. The communication between the SoC and the PMIC can
+  optionally be encrypted. Also a non standard Dual IO SPI mode can be
+  used to increase speed.
+
+  IP Pairing
+
+  On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+  The signals of these pins are routed over the SPI bus using the pwrap
+  bridge. In the binding description below the properties needed for bridging
+  are marked with "IP Pairing". These are optional on SoCs which do not support
+  IP Pairing
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pwrap
+              - mediatek,mt6765-pwrap
+              - mediatek,mt6779-pwrap
+              - mediatek,mt6795-pwrap
+              - mediatek,mt6797-pwrap
+              - mediatek,mt6873-pwrap
+              - mediatek,mt7622-pwrap
+              - mediatek,mt8135-pwrap
+              - mediatek,mt8173-pwrap
+              - mediatek,mt8183-pwrap
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8188-pwrap
+              - mediatek,mt8195-pwrap
+              - mediatek,mt8365-pwrap
+              - mediatek,mt8516-pwrap
+      - items:
+          - enum:
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+          - const: syscon
+
+  reg:
+    minItems: 1
+    items:
+      - description: PMIC wrapper registers
+      - description: IP pairing registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SPI bus clock
+      - description: Main module clock
+      - description: System module clock
+      - description: Timer module clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: wrap
+      - const: sys
+      - const: tmr
+
+  resets:
+    minItems: 1
+    items:
+      - description: PMIC wrapper reset
+      - description: IP pairing reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  pmic:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+dependentRequired:
+  resets: [reset-names]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8365-pwrap
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/mt8135-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pwrap@1000f000 {
+            compatible = "mediatek,mt8135-pwrap";
+            reg = <0 0x1000f000 0 0x1000>,
+                  <0 0x11017000 0 0x1000>;
+            reg-names = "pwrap", "pwrap-bridge";
+            interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk26m>, <&clk26m>;
+            clock-names = "spi", "wrap";
+            resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+                     <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+            reset-names = "pwrap", "pwrap-bridge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
new file mode 100644
index 0000000000..69afb329e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wdma: mdp3-wdma@14006000 {
+      compatible = "mediatek,mt8183-mdp3-wdma";
+      reg = <0x14006000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_WDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
new file mode 100644
index 0000000000..f21eb907ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Smart Voltage Scaling (SVS)
+
+maintainers:
+  - Roger Lu <roger.lu@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Kevin Hilman <khilman@kernel.org>
+
+description: |+
+  The SVS engine is a piece of hardware which has several
+  controllers(banks) for calculating suitable voltage to
+  different power domains(CPU/GPU/CCI) according to
+  chip process corner, temperatures and other factors. Then DVFS
+  driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-svs
+      - mediatek,mt8192-svs
+
+  reg:
+    maxItems: 1
+    description: Address range of the MTK SVS controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Main clock for MTK SVS controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    minItems: 1
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+    items:
+      - description: SVS efuse for SVS controller
+      - description: Thermal efuse for SVS controller
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: t-calibration-data
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: svs_rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        svs@1100b000 {
+            compatible = "mediatek,mt8183-svs";
+            reg = <0 0x1100b000 0 0x1000>;
+            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_THERM>;
+            clock-names = "main";
+            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
new file mode 100644
index 0000000000..2bc367793a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -0,0 +1,78 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power-domain.yaml. It provides the power domains defined in
+- include/dt-bindings/power/mt8173-power.h
+- include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt6765-power.h
+- include/dt-bindings/power/mt2701-power.h
+- include/dt-bindings/power/mt2712-power.h
+- include/dt-bindings/power/mt7622-power.h
+
+Required properties:
+- compatible: Should be one of:
+	- "mediatek,mt2701-scpsys"
+	- "mediatek,mt2712-scpsys"
+	- "mediatek,mt6765-scpsys"
+	- "mediatek,mt6797-scpsys"
+	- "mediatek,mt7622-scpsys"
+	- "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
+	- "mediatek,mt7623a-scpsys": For MT7623A SoC
+	- "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
+	- "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+- infracfg: must contain a phandle to the infracfg controller
+- clock, clock-names: clocks according to the common clock binding.
+                      These are clocks which hardware needs to be
+                      enabled before enabling certain power domains.
+	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
+	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
+	Required clocks for MT6765: MUX: "mm", "mfg"
+				    CG: "mm-0", "mm-1", "mm-2", "mm-3", "isp-0",
+					"isp-1", "cam-0", "cam-1", "cam-2",
+					"cam-3","cam-4"
+	Required clocks for MT6797: "mm", "mfg", "vdec"
+	Required clocks for MT7622 or MT7629: "hif_sel"
+	Required clocks for MT7623A: "ethif"
+	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
+
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
+Example:
+
+	scpsys: scpsys@10006000 {
+		#power-domain-cells = <1>;
+		compatible = "mediatek,mt8173-scpsys";
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&clk26m>,
+			 <&topckgen CLK_TOP_MM_SEL>;
+			 <&topckgen CLK_TOP_VENC_SEL>,
+			 <&topckgen CLK_TOP_VENC_LT_SEL>;
+		clock-names = "mfg", "mm", "venc", "venc_lt";
+	};
+
+Example consumer:
+
+	afe: mt8173-afe-pcm@11220000 {
+		compatible = "mediatek,mt8173-afe-pcm";
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
new file mode 100644
index 0000000000..a464111495
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Timer Counter Block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each
+  timer has three channels with two counters each.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - atmel,at91rm9200-tcb
+          - atmel,at91sam9x5-tcb
+          - atmel,sama5d2-tcb
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      List of interrupts. One interrupt per TCB channel if available or one
+      interrupt for the TC block
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    description:
+      List of clock names. Always includes t0_clk and slow clk. Also includes
+      t1_clk and t2_clk if a clock per channel is available.
+    minItems: 2
+    maxItems: 4
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^timer@[0-2]$":
+    description: The timer block channels that are used as timers or counters.
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        items:
+          - enum:
+              - atmel,tcb-timer
+              - atmel,tcb-pwm
+              - microchip,tcb-capture
+      reg:
+        description:
+          List of channels to use for this particular timer. In Microchip TCB capture
+          mode channels are registered as a counter devices, for the qdec mode TCB0's
+          channel <0> and <1> are required.
+
+        minItems: 1
+        maxItems: 3
+    required:
+      - compatible
+      - reg
+
+  "^pwm@[0-2]$":
+    description: The timer block channels that are used as PWMs.
+    $ref: /schemas/pwm/pwm.yaml#
+    type: object
+    properties:
+      compatible:
+        const: atmel,tcb-pwm
+      reg:
+        description:
+          TCB channel to use for this PWM.
+        enum: [ 0, 1, 2 ]
+
+      "#pwm-cells":
+        description:
+          The only third cell flag supported by this binding is
+          PWM_POLARITY_INVERTED.
+        const: 3
+
+    required:
+      - compatible
+      - reg
+      - "#pwm-cells"
+
+    additionalProperties: false
+
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,sama5d2-tcb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: t0_clk
+            - const: gclk
+            - const: slow_clk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: t0_clk
+                - const: slow_clk
+            - items:
+                - const: t0_clk
+                - const: t1_clk
+                - const: t2_clk
+                - const: slow_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* One interrupt per TC block: */
+        tcb0: timer@fff7c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };
+
+    /* One interrupt per TC channel in a TC block: */
+        tcb1: timer@fffdc000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfffdc000 0x100>;
+                interrupts = <26 4>, <27 4>, <28 4>;
+                clocks = <&tcb1_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <0>;
+                };
+
+                timer@1 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <1>;
+                };
+
+                pwm@2 {
+                        compatible = "atmel,tcb-pwm";
+                        reg = <2>;
+                        #pwm-cells = <3>;
+                };
+         };
+    /* TCB0 Capture with QDEC: */
+        timer@f800c000 {
+                compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0xfff7c000 0x100>;
+                interrupts = <18 4>;
+                clocks = <&tcb0_clk>, <&clk32k>;
+                clock-names = "t0_clk", "slow_clk";
+
+                timer@0 {
+                        compatible = "microchip,tcb-capture";
+                        reg = <0>, <1>;
+                };
+
+                timer@2 {
+                        compatible = "atmel,tcb-timer";
+                        reg = <2>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
new file mode 100644
index 0000000000..365a9fed59
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  PolarFire SoC devices include a microcontroller acting as the system controller,
+  which provides "services" to the main processor and to the FPGA fabric. These
+  services include hardware rng, reprogramming of the FPGA and verification of the
+  eNVM contents etc. More information on these services can be found online, at
+  https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html
+
+  Communication with the system controller is done via a mailbox, of which the client
+  portion is documented here.
+
+properties:
+  mboxes:
+    maxItems: 1
+
+  compatible:
+    const: microchip,mpfs-sys-controller
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    syscontroller {
+      compatible = "microchip,mpfs-sys-controller";
+      mboxes = <&mbox 0>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml
new file mode 100644
index 0000000000..23e7e4ea01
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Global Control Registers block in Nuvoton SoCs
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
+  that expose misc functionality such as chip model and version information or
+  pinmux settings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,wpcm450-gcr
+          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    gcr: syscon@800000 {
+      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+      reg = <0x800000 0x1000>;
+
+      mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x38 0x07>;
+        idle-states = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
new file mode 100644
index 0000000000..d1c7c2be86
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Always-On Subsystem side channel
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the hardware component responsible for side channel
+  requests to the always-on subsystem (AOSS), used for certain power management
+  requests that is not handled by the standard RPMh interface. Each client in the
+  SoC has its own block of message RAM and IRQ for communication with the AOSS.
+  The protocol used to communicate in the message RAM is known as Qualcomm
+  Messaging Protocol (QMP)
+
+  The AOSS side channel exposes control over a set of resources, used to control
+  a set of debug related clocks and to affect the low power state of resources
+  related to the secondary subsystems.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qdu1000-aoss-qmp
+          - qcom,sa8775p-aoss-qmp
+          - qcom,sc7180-aoss-qmp
+          - qcom,sc7280-aoss-qmp
+          - qcom,sc8180x-aoss-qmp
+          - qcom,sc8280xp-aoss-qmp
+          - qcom,sdm845-aoss-qmp
+          - qcom,sm6350-aoss-qmp
+          - qcom,sm8150-aoss-qmp
+          - qcom,sm8250-aoss-qmp
+          - qcom,sm8350-aoss-qmp
+          - qcom,sm8450-aoss-qmp
+          - qcom,sm8550-aoss-qmp
+      - const: qcom,aoss-qmp
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the message RAM for this client's
+      communication with the AOSS
+
+  interrupts:
+    maxItems: 1
+    description:
+      Should specify the AOSS message IRQ for this client
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client, as described in mailbox/mailbox.txt
+
+  "#clock-cells":
+    const: 0
+    description:
+      The single clock represents the QDSS clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - "#clock-cells"
+
+additionalProperties: false
+
+patternProperties:
+  "^(cx|mx|ebi)$":
+    type: object
+    description:
+      The AOSS side channel also provides the controls for three cooling devices,
+      these are expressed as subnodes of the QMP node. The name of the node is
+      used to identify the resource and must therefore be "cx", "mx" or "ebi".
+
+    properties:
+      "#cooling-cells":
+        const: 2
+
+    required:
+      - "#cooling-cells"
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    aoss_qmp: qmp@c300000 {
+      compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+      reg = <0x0c300000 0x100000>;
+      interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+      mboxes = <&apss_shared 0>;
+
+      #clock-cells = <0>;
+
+      cx_cdev: cx {
+        #cooling-cells = <2>;
+      };
+
+      mx_cdev: mx {
+        #cooling-cells = <2>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml
new file mode 100644
index 0000000000..bdf482db32
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APR/GPR services shared parts
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic
+  Packet Router).
+
+properties:
+  reg:
+    minimum: 1
+    maximum: 13
+    description: |
+      APR Service ID
+        3 = DSP Core Service
+        4 = Audio  Front End Service.
+        5 = Voice Stream Manager Service.
+        6 = Voice processing manager.
+        7 = Audio Stream Manager Service.
+        8 = Audio Device Manager Service.
+        9 = Multimode voice manager.
+        10 = Core voice stream.
+        11 = Core voice processor.
+        12 = Ultrasound stream manager.
+        13 = Listen stream manager.
+      GPR Service ID
+        1 = Audio Process Manager Service
+        2 = Proxy Resource Manager Service.
+        3 = AMDB Service.
+        4 = Voice processing manager.
+
+  qcom,protection-domain:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: |
+      Protection domain service name and path for APR service (if supported).
+      Possible values are::
+      "avs/audio", "msm/adsp/audio_pd".
+      "kernel/elf_loader", "msm/modem/wlan_pd".
+      "tms/servreg", "msm/adsp/audio_pd".
+      "tms/servreg", "msm/modem/wlan_pd".
+      "tms/servreg", "msm/slpi/sensor_pd".
+
+required:
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
new file mode 100644
index 0000000000..e51acdcaaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for
+  communication between Application processor and QDSP. APR/GPR is mainly
+  used for audio/voice services on the QDSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,apr
+      - qcom,apr-v2
+      - qcom,gpr
+
+  power-domains:
+    maxItems: 1
+
+  qcom,apr-domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4, 5, 6, 7]
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+    deprecated: true
+
+  qcom,domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+      Selects the processor domain for gpr
+        1 = Modem Domain
+        2 = Audio DSP Domain
+        3 = Application Processor Domain
+
+  qcom,glink-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    maxItems: 1
+
+  qcom,intents:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 32
+    items:
+      items:
+        - description: size of each intent to preallocate
+        - description: amount of intents to preallocate
+          minimum: 1
+    description:
+      List of (size, amount) pairs describing what intents should be
+      preallocated for this virtual channel. This can be used to tweak the
+      default intents available for the channel to meet expectations of the
+      remote.
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    items:
+      - const: apr_audio_svc
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^service@[1-9a-d]$":
+    type: object
+    $ref: /schemas/soc/qcom/qcom,apr-services.yaml
+    additionalProperties: true
+    description:
+      APR/GPR static port services.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,q6core
+          - qcom,q6asm
+          - qcom,q6afe
+          - qcom,q6adm
+          - qcom,q6apm
+          - qcom,q6prm
+
+required:
+  - compatible
+  - qcom,domain
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,gpr
+    then:
+      properties:
+        qcom,glink-channels:
+          items:
+            - const: adsp_apps
+        power-domains: false
+    else:
+      properties:
+        qcom,glink-channels:
+          items:
+            - const: apr_audio_svc
+
+  - if:
+      required:
+        - qcom,glink-channels
+    then:
+      properties:
+        qcom,smd-channels: false
+
+  - if:
+      required:
+        - qcom,smd-channels
+    then:
+      properties:
+        qcom,glink-channels: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        qcom,glink-channels = "apr_audio_svc";
+        qcom,intents = <512 20>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        q6core: service@3 {
+            compatible = "qcom,q6core";
+            reg = <APR_SVC_ADSP_CORE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
+            };
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+                /* ... */
+            };
+            /* ... */
+        };
+    };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        qcom,glink-channels = "adsp_apps";
+        qcom,intents = <512 20>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+            compatible = "qcom,q6apm";
+            reg = <GPR_APM_MODULE_IID>;
+            #sound-dai-cells = <0>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
+
+            bedais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #sound-dai-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
new file mode 100644
index 0000000000..ce7e20dd22
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Data Capture and Compare
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description: |
+    DCC (Data Capture and Compare) is a DMA engine which is used to save
+    configuration data or system memory contents during catastrophic failure
+    or SW trigger. DCC is used to capture and store data for debugging purpose
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm8150-dcc
+          - qcom,sc7280-dcc
+          - qcom,sc7180-dcc
+          - qcom,sdm845-dcc
+      - const: qcom,dcc
+
+  reg:
+    items:
+      - description: DCC base
+      - description: DCC RAM base
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@10a2000{
+        compatible = "qcom,sm8150-dcc", "qcom,dcc";
+        reg = <0x010a2000 0x1000>,
+              <0x010ad000 0x2000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
new file mode 100644
index 0000000000..f2c5ec7e64
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Embedded USB Debugger
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description:
+  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
+  mini USB-hub implemented on chip to support USB-based debug capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7280-eud
+      - const: qcom,eud
+
+  reg:
+    items:
+      - description: EUD Base Register Region
+      - description: EUD Mode Manager Register
+
+  interrupts:
+    description: EUD interrupt
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      These ports is to be attached to the endpoint of the DWC3 controller node
+      and type C connector node. The controller has the "usb-role-switch"
+      property.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the DWC3 controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the type C connector.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    eud@88e0000 {
+           compatible = "qcom,sc7280-eud", "qcom,eud";
+           reg = <0x88e0000 0x2000>,
+                 <0x88e2000 0x1000>;
+
+           ports {
+                   #address-cells = <1>;
+                   #size-cells = <0>;
+                   port@0 {
+                           reg = <0>;
+                           eud_ep: endpoint {
+                                   remote-endpoint = <&usb2_role_switch>;
+                           };
+                   };
+
+                   port@1 {
+                           reg = <1>;
+                           eud_con: endpoint {
+                                   remote-endpoint = <&con_eud>;
+                           };
+                   };
+           };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
new file mode 100644
index 0000000000..8a4b7ba3aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+ is a programmable module for supporting a wide range of serial interfaces
+ like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+ Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+ Wrapper controller is modeled as a node with zero or more child nodes each
+ representing a serial engine.
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-se-qup
+      - qcom,geni-se-i2c-master-hub
+
+  reg:
+    description: QUP wrapper common register address and length.
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: qup-core
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based SPI controller. SPI in master mode
+                 supports up to 50MHz, up to four chip selects, programmable
+                 data path from 4 bits to 32 bits and numerous protocol
+                 variants.
+    $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    description: GENI serial engine based I2C controller.
+    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    description: GENI Serial Engine based UART Controller.
+    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-se-i2c-master-hub
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Slave AHB Clock
+
+        iommus: false
+
+      patternProperties:
+        "spi@[0-9a-f]+$": false
+        "serial@[0-9a-f]+$": false
+    else:
+      properties:
+        clock-names:
+          items:
+            - const: m-ahb
+            - const: s-ahb
+
+        clocks:
+          items:
+            - description: Master AHB Clock
+            - description: Slave AHB Clock
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        geniqup@8c0000 {
+            compatible = "qcom,geni-se-qup";
+            reg = <0 0x008c0000 0 0x6000>;
+            clock-names = "m-ahb", "s-ahb";
+            clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            i2c0: i2c@a94000 {
+                compatible = "qcom,geni-i2c";
+                reg = <0 0xa94000 0 0x4000>;
+                interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+                clock-names = "se";
+                clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+                pinctrl-names = "default", "sleep";
+                pinctrl-0 = <&qup_1_i2c_5_active>;
+                pinctrl-1 = <&qup_1_i2c_5_sleep>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+
+            uart0: serial@a88000 {
+                compatible = "qcom,geni-uart";
+                reg = <0 0xa88000 0 0x7000>;
+                interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+                clock-names = "se";
+                clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+                pinctrl-names = "default", "sleep";
+                pinctrl-0 = <&qup_1_uart_3_active>;
+                pinctrl-1 = <&qup_1_uart_3_sleep>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
new file mode 100644
index 0000000000..c33704333e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm General Serial Bus Interface (GSBI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The GSBI controller is modeled as a node with zero or more child nodes, each
+  representing a serial sub-node device that is mux'd as part of the GSBI
+  configuration settings.  The mode setting will govern the input/output mode
+  of the 4 GSBI IOs.
+
+  A GSBI controller node can contain 0 or more child nodes representing serial
+  devices.  These serial devices can be a QCOM UART, I2C controller, spi
+  controller, or some combination of aforementioned devices.
+
+properties:
+  compatible:
+    const: qcom,gsbi-v1.0.0
+
+  '#address-cells':
+    const: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The GSBI index.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iface
+
+  qcom,crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      CRCI MUX value for QUP CRCI ports.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+  qcom,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      MUX value for configuration of the serial interface.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+  '#size-cells':
+    const: 1
+
+  syscon-tcsr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of TCSR syscon node.Required if child uses dma.
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/qcom,spi-qup.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/qcom,i2c-qup.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/serial/qcom,msm-uartdm.yaml#
+
+required:
+  - compatible
+  - cell-index
+  - clocks
+  - clock-names
+  - qcom,mode
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,gsbi.h>
+
+    gsbi@12440000 {
+        compatible = "qcom,gsbi-v1.0.0";
+        reg = <0x12440000 0x100>;
+        cell-index = <1>;
+        clocks = <&gcc GSBI1_H_CLK>;
+        clock-names = "iface";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        syscon-tcsr = <&tcsr>;
+        qcom,mode = <GSBI_PROT_I2C_UART>;
+
+        serial@12450000 {
+            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+            reg = <0x12450000 0x100>,
+                  <0x12400000 0x03>;
+            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+        };
+
+        i2c@12460000 {
+            compatible = "qcom,i2c-qup-v1.1.1";
+            reg = <0x12460000 0x1000>;
+            pinctrl-0 = <&i2c1_pins>;
+            pinctrl-1 = <&i2c1_pins_sleep>;
+            pinctrl-names = "default", "sleep";
+            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            status = "disabled"; /* UART chosen */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml
new file mode 100644
index 0000000000..aae9cf7b8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ramp Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Ramp Controller is used to program the sequence ID for pulse
+  swallowing, enable sequences and link Sequence IDs (SIDs) for the
+  CPU cores on some Qualcomm SoCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8976-ramp-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpu-power-controller@b014000 {
+        compatible = "qcom,msm8976-ramp-controller";
+        reg = <0x0b014000 0x68>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
new file mode 100644
index 0000000000..bceb479f74
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC GLINK firmware interface for battery management, USB
+  Type-C and other things.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
+  platforms and implement USB Type-C handling and battery management. This
+  binding describes the component in the OS used to communicate with the
+  firmware and connect it's resources to those described in the Devicetree,
+  particularly the USB Type-C controllers relationship with USB and DisplayPort
+  components.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc8180x-pmic-glink
+          - qcom,sc8280xp-pmic-glink
+          - qcom,sm8350-pmic-glink
+          - qcom,sm8450-pmic-glink
+          - qcom,sm8550-pmic-glink
+      - const: qcom,pmic-glink
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@\d$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |+
+    pmic-glink {
+        compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        connector@0 {
+            compatible = "usb-c-connector";
+            reg = <0>;
+            power-role = "dual";
+            data-role = "dual";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&usb_role>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&ss_phy_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    endpoint {
+                        remote-endpoint = <&sbu_mux>;
+                    };
+                };
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
new file mode 100644
index 0000000000..031800985b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  The Qualcomm RPM (Resource Power Manager) architecture includes a concept
+  of "RPM Masters". They can be thought of as "the local gang leaders", usually
+  spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions
+  (particularly around entering hardware-driven low power modes: XO shutdown
+  and total system-wide power collapse) are first made at Master-level, and
+  only then aggregated for the entire system.
+
+  The Master Stats provide a few useful bits that can be used to assess whether
+  our device has entered the desired low-power mode, how long it took to do so,
+  the duration of that residence, how long it took to come back online,
+  how many times a given sleep state was entered and which cores are actively
+  voting for staying awake.
+
+  This scheme has been used on various SoCs in the 2013-2023 era, with some
+  newer or higher-end designs providing this information through an SMEM query.
+
+properties:
+  compatible:
+    const: qcom,rpm-master-stats
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Phandle to an RPM MSG RAM slice containing the master stats
+    minItems: 1
+    maxItems: 5
+
+  qcom,master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      The name of the RPM Master which owns the MSG RAM slice where this
+      instance of Master Stats resides
+    minItems: 1
+    maxItems: 5
+
+required:
+  - compatible
+  - qcom,rpm-msg-ram
+  - qcom,master-names
+
+additionalProperties: false
+
+examples:
+  - |
+    stats {
+      compatible = "qcom,rpm-master-stats";
+      qcom,rpm-msg-ram = <&apss_master_stats>,
+                         <&mpss_master_stats>,
+                         <&adsp_master_stats>,
+                         <&cdsp_master_stats>,
+                         <&tz_master_stats>;
+      qcom,master-names = "APSS",
+                          "MPSS",
+                          "ADSP",
+                          "CDSP",
+                          "TZ";
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
new file mode 100644
index 0000000000..b00be9e012
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM)
+
+description:
+  This driver is used to interface with the Resource Power Manager (RPM) found
+  in various Qualcomm platforms. The RPM allows each component in the system
+  to vote for state of the system resources, such as clocks, regulators and bus
+  frequencies.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-apq8064
+      - qcom,rpm-msm8660
+      - qcom,rpm-msm8960
+      - qcom,rpm-ipq8064
+      - qcom,rpm-mdm9615
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: ack
+      - const: err
+      - const: wakeup
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the RPM.
+
+patternProperties:
+  "^regulators(-[01])?$":
+    type: object
+    $ref: /schemas/regulator/qcom,rpm-regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/qcom-rpm.h>
+
+    rpm@108000 {
+      compatible = "qcom,rpm-msm8960";
+      reg = <0x108000 0x1000>;
+      qcom,ipc = <&apcs 0x8 2>;
+
+      interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>;
+      interrupt-names = "ack", "err", "wakeup";
+
+      regulators {
+        compatible = "qcom,rpm-pm8921-regulators";
+        vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+        s1 {
+          regulator-min-microvolt = <1225000>;
+          regulator-max-microvolt = <1225000>;
+
+          bias-pull-down;
+
+          qcom,switch-mode-frequency = <3200000>;
+        };
+
+        pm8921_s4: s4 {
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+
+          qcom,switch-mode-frequency = <1600000>;
+          bias-pull-down;
+
+          qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
new file mode 100644
index 0000000000..af632d0e03
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMH RSC
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Resource Power Manager Hardened (RPMH) is the mechanism for communicating
+  with the hardened resource accelerators on Qualcomm SoCs. Requests to the
+  resources can be written to the Trigger Command Set (TCS)  registers and
+  using a (addr, val) pair and triggered. Messages in the TCS are then sent in
+  sequence over an internal bus.
+
+  The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+  (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+  active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+  be written to from Linux. The structure of each DRV follows the same template
+  with a few variations that are captured by the properties here.
+
+  A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+  have powered off to facilitate idle power saving. TCS could be classified as::
+    ACTIVE  - Triggered by Linux
+    SLEEP   - Triggered by F/W
+    WAKE    - Triggered by F/W
+    CONTROL - Triggered by F/W
+  See also:: <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+  The order in which they are described in the DT, should match the hardware
+  configuration.
+
+  Requests can be made for the state of a resource, when the subsystem is
+  active or idle. When all subsystems like Modem, GPU, CPU are idle, the
+  resource state will be an aggregate of the sleep votes from each of those
+  subsystems. Clients may request a sleep value for their shared resources in
+  addition to the active mode requests.
+
+  Drivers that want to use the RSC to communicate with RPMH must specify their
+  bindings as child nodes of the RSC controllers they wish to communicate with.
+
+properties:
+  compatible:
+    const: qcom,rpmh-rsc
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      The interrupt that trips when a message complete/response is received for
+      this DRV from the accelerators.
+      Number of interrupts must match number of DRV blocks.
+
+  label:
+    description:
+      Name for the RSC. The name would be used in trace logs.
+
+  qcom,drv-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The ID of the DRV in the RSC block that will be used by this controller.
+
+  qcom,tcs-config:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 4
+    maxItems: 4
+    items:
+      items:
+        - description: |
+            TCS type::
+             - ACTIVE_TCS
+             - SLEEP_TCS
+             - WAKE_TCS
+             - CONTROL_TCS
+          enum: [ 0, 1, 2, 3 ]
+        - description: Number of TCS
+    description: |
+      The tuple defining the configuration of TCS. Must have two cells which
+      describe each TCS type.  The order of the TCS must match the hardware
+      configuration.
+
+  qcom,tcs-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The offset of the TCS blocks.
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: drv-0
+      - const: drv-1
+      - const: drv-2
+      - const: drv-3
+
+  power-domains:
+    maxItems: 1
+
+  bcm-voter:
+    $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmhcc.yaml#
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+patternProperties:
+  '^regulators(-[0-9])?$':
+    $ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - qcom,drv-id
+  - qcom,tcs-config
+  - qcom,tcs-offset
+  - reg
+  - reg-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of
+    // 2, the register offsets for DRV2 start at 0D00, the register
+    // calculations are like this::
+    // DRV0: 0x179C0000
+    // DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+    // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+    // TCS-OFFSET: 0xD00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@179c0000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x179c0000 0x10000>,
+              <0x179d0000 0x10000>,
+              <0x179e0000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 1>;
+        power-domains = <&CLUSTER_PD>;
+      };
+
+  - |
+    // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+    // register offsets for DRV0 start at 01C00, the register calculations are
+    // like this::
+    // DRV0: 0xAF20000
+    // TCS-OFFSET: 0x1C00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@af20000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0xaf20000 0x10000>;
+        reg-names = "drv-0";
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+        label = "disp_rsc";
+        qcom,tcs-offset = <0x1c00>;
+        qcom,drv-id = <0>;
+        qcom,tcs-config = <ACTIVE_TCS  0>,
+                          <SLEEP_TCS   1>,
+                          <WAKE_TCS    1>,
+                          <CONTROL_TCS 0>;
+        power-domains = <&CLUSTER_PD>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rsc@18200000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x18200000 0x10000>,
+              <0x18210000 0x10000>,
+              <0x18220000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 0>;
+        power-domains = <&CLUSTER_PD>;
+
+        clock-controller {
+            compatible = "qcom,sm8350-rpmh-clk";
+            #clock-cells = <1>;
+            clock-names = "xo";
+            clocks = <&xo_board>;
+        };
+
+        power-controller {
+            compatible = "qcom,sm8350-rpmhpd";
+            #power-domain-cells = <1>;
+            operating-points-v2 = <&rpmhpd_opp_table>;
+
+            rpmhpd_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                rpmhpd_opp_ret: opp1 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                };
+
+                rpmhpd_opp_min_svs: opp2 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                };
+
+                rpmhpd_opp_low_svs: opp3 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                };
+
+                rpmhpd_opp_svs: opp4 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                };
+
+                rpmhpd_opp_svs_l1: opp5 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                };
+
+                rpmhpd_opp_nom: opp6 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                };
+
+                rpmhpd_opp_nom_l1: opp7 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                };
+
+                rpmhpd_opp_nom_l2: opp8 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                };
+
+                rpmhpd_opp_turbo: opp9 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                };
+
+                rpmhpd_opp_turbo_l1: opp10 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                };
+            };
+        };
+
+        bcm-voter {
+            compatible = "qcom,bcm-voter";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
new file mode 100644
index 0000000000..2fa725b8af
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM) over SMD/GLINK
+
+description: |
+  This driver is used to interface with the Resource Power Manager (RPM) found
+  in various Qualcomm platforms. The RPM allows each component in the system
+  to vote for state of the system resources, such as clocks, regulators and bus
+  frequencies.
+
+  The SMD or GLINK information for the RPM edge should be filled out.  See
+  qcom,smd.yaml for the required edge properties.  All SMD/GLINK related
+  properties will reside within the RPM node itself.
+
+  The RPM exposes resources to its subnodes.  The rpm_requests node must be
+  present and this subnode may contain children that designate regulator
+  resources.
+
+  Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+  for information on the regulator subnodes that can exist under the
+  rpm_requests.
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-apq8084
+      - qcom,rpm-ipq6018
+      - qcom,rpm-ipq9574
+      - qcom,rpm-mdm9607
+      - qcom,rpm-msm8226
+      - qcom,rpm-msm8610
+      - qcom,rpm-msm8909
+      - qcom,rpm-msm8916
+      - qcom,rpm-msm8917
+      - qcom,rpm-msm8936
+      - qcom,rpm-msm8937
+      - qcom,rpm-msm8952
+      - qcom,rpm-msm8953
+      - qcom,rpm-msm8974
+      - qcom,rpm-msm8976
+      - qcom,rpm-msm8994
+      - qcom,rpm-msm8996
+      - qcom,rpm-msm8998
+      - qcom,rpm-qcm2290
+      - qcom,rpm-qcs404
+      - qcom,rpm-sdm660
+      - qcom,rpm-sm6115
+      - qcom,rpm-sm6125
+      - qcom,rpm-sm6375
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmcc.yaml#
+    unevaluatedProperties: false
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+  qcom,glink-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the RPM communication
+    items:
+      - const: rpm_requests
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the RPM communication
+    items:
+      - const: rpm_requests
+
+patternProperties:
+  "^regulators(-[01])?$":
+    $ref: /schemas/regulator/qcom,smd-rpm-regulator.yaml#
+    unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,rpm-apq8084
+          - qcom,rpm-mdm9607
+          - qcom,rpm-msm8226
+          - qcom,rpm-msm8610
+          - qcom,rpm-msm8909
+          - qcom,rpm-msm8916
+          - qcom,rpm-msm8917
+          - qcom,rpm-msm8936
+          - qcom,rpm-msm8937
+          - qcom,rpm-msm8952
+          - qcom,rpm-msm8953
+          - qcom,rpm-msm8974
+          - qcom,rpm-msm8976
+          - qcom,rpm-msm8994
+then:
+  properties:
+    qcom,glink-channels: false
+  required:
+    - qcom,smd-channels
+else:
+  properties:
+    qcom,smd-channels: false
+  required:
+    - qcom,glink-channels
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc {
+        compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+        smd-edge {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+            rpm-requests {
+                compatible = "qcom,rpm-msm8916";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                    clocks = <&xo_board>;
+                    clock-names = "xo";
+                };
+
+                power-controller {
+                    compatible = "qcom,msm8916-rpmpd";
+                    #power-domain-cells = <1>;
+                    operating-points-v2 = <&rpmpd_opp_table>;
+
+                    rpmpd_opp_table: opp-table {
+                        compatible = "operating-points-v2";
+
+                        opp-1 {
+                            opp-level = <1>;
+                        };
+                        opp-2 {
+                            opp-level = <2>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
new file mode 100644
index 0000000000..4819ce90d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Driver
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Qualcomm Shared Memory Driver is a FIFO based communication channel for
+  sending data between the various subsystems in Qualcomm platforms.
+
+  Using the top-level SMD node is deprecated. Instead, the SMD edges are defined
+  directly below the device node representing the respective remote subsystem
+  or remote processor.
+
+deprecated: true
+
+properties:
+  compatible:
+    const: qcom,smd
+
+patternProperties:
+  "^smd-edge|rpm$":
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Each subnode of the SMD node represents a remote subsystem or a remote
+      processor of some sort - or in SMD language an "edge". The name of the
+      edges are not important.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # The following example represents a smd node, with one edge representing the
+  # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+  # "rpm_request" channel.
+  # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smd";
+
+        rpm {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+            rpm-requests {
+                compatible = "qcom,rpm-msm8974";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
new file mode 100644
index 0000000000..bc7815d985
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Manager
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This binding describes the Qualcomm Shared Memory Manager, a region of
+  reserved-memory used to share data between various subsystems and OSes in
+  Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,smem
+
+  reg:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description: handle to memory reservation for main SMEM memory region.
+
+  hwlocks:
+    maxItems: 1
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: handle to RPM message memory resource
+
+  no-map: true
+
+required:
+  - compatible
+  - hwlocks
+
+oneOf:
+  - required:
+      - reg
+      - no-map
+  - required:
+      - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        smem@fa00000 {
+            compatible = "qcom,smem";
+            reg = <0xfa00000 0x200000>;
+            no-map;
+
+            hwlocks = <&tcsr_mutex 3>;
+        };
+    };
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        smem_region: smem@fa00000 {
+            reg = <0xfa00000 0x200000>;
+            no-map;
+        };
+    };
+
+    smem {
+        compatible = "qcom,smem";
+
+        memory-region = <&smem_region>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+        hwlocks = <&tcsr_mutex 3>;
+    };
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rpm_msg_ram: sram@fc428000 {
+            compatible = "qcom,rpm-msg-ram";
+            reg = <0xfc428000 0x4000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
new file mode 100644
index 0000000000..58500529b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Point 2 Point
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory Point to Point (SMP2P) protocol facilitates communication
+  of a single 32-bit value between two processors.  Each value has a single
+  writer (the local side) and a single reader (the remote side).  Values are
+  uniquely identified in the system by the directed edge (local processor ID to
+  remote processor ID) and a string identifier.
+
+properties:
+  compatible:
+    const: qcom,smp2p
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote end of the smp2p edge.
+
+  qcom,local-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the local endpoint of this edge.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote endpoint of this edge.
+
+  qcom,smem:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maxItems: 2
+    description:
+      Two identifiers of the inbound and outbound smem items used for this edge.
+
+patternProperties:
+  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$":
+    type: object
+    description:
+      Each SMP2P pair contain a set of inbound and outbound entries, these are
+      described in subnodes of the smp2p device node. The node names are not
+      important.
+
+    properties:
+      interrupt-controller:
+        description:
+          Marks the entry as inbound; the node should be specified as a two
+          cell interrupt-controller.  If not specified this node will denote
+          the outgoing entry.
+
+      '#interrupt-cells':
+        const: 2
+
+      qcom,entry-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          The name of this entry, for inbound entries this will be used to
+          match against the remotely allocated entry and for outbound entries
+          this name is used for allocating entries.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for outgoing entries.
+
+    required:
+      - qcom,entry-name
+
+    oneOf:
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+      - required:
+          - '#qcom,smem-state-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - qcom,local-pid
+  - qcom,remote-pid
+  - qcom,smem
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMP2P setup with the wireless processor,
+  # defined from the 8974 apps processor's point-of-view. It encompasses one
+  # inbound and one outbound entry.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smp2p";
+        qcom,smem = <431>, <451>;
+        interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 18>;
+        qcom,local-pid = <0>;
+        qcom,remote-pid = <4>;
+
+        wcnss_smp2p_out: master-kernel {
+            qcom,entry-name = "master-kernel";
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smp2p_in: slave-kernel {
+            qcom,entry-name = "slave-kernel";
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
new file mode 100644
index 0000000000..db67cf0432
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory State Machine
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory State Machine facilitates broadcasting of single bit state
+  information between the processors in a Qualcomm SoC. Each processor is
+  assigned 32 bits of state that can be modified. A processor can through a
+  matrix of bitmaps signal subscription of notifications upon changes to a
+  certain bit owned by a certain remote processor.
+
+properties:
+  compatible:
+    const: qcom,smsm
+
+  '#address-cells':
+    const: 1
+
+  qcom,local-host:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Identifier of the local processor in the list of hosts, or in other words
+      specifier of the column in the subscription matrix representing the local
+      processor.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^qcom,ipc-[1-4]$":
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the N:th
+      remote processor.
+
+  "@[0-9a-f]$":
+    type: object
+    description:
+      Each processor's state bits are described by a subnode of the SMSM device
+      node.  Nodes can either be flagged as an interrupt-controller to denote a
+      remote processor's state bits or the local processors bits.  The node
+      names are not important.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      interrupt-controller:
+        description:
+          Marks the entry as a interrupt-controller and the state bits to
+          belong to a remote processor.
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupts:
+        maxItems: 1
+        description:
+          One entry specifying remote IRQ used by the remote processor to
+          signal changes of its state bits.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for local entry. Denotes bit number.
+
+    required:
+      - reg
+
+    oneOf:
+      - required:
+          - '#qcom,smem-state-cells'
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+          - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+
+anyOf:
+  - required:
+      - qcom,ipc-1
+  - required:
+      - qcom,ipc-2
+  - required:
+      - qcom,ipc-3
+  - required:
+      - qcom,ipc-4
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMEM setup for controlling properties of
+  # the wireless processor, defined from the 8974 apps processor's
+  # point-of-view. It encompasses one outbound entry and the outgoing interrupt
+  # for the wireless processor.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smsm";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,ipc-3 = <&apcs 8 19>;
+
+        apps_smsm: apps@0 {
+            reg = <0>;
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smsm: wcnss@7 {
+            reg = <7>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
new file mode 100644
index 0000000000..20c8cd38ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Subsystem Power Manager
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Qualcomm Subsystem Power Manager, used to control
+  the peripheral logic surrounding the application cores in Qualcomm platforms.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sdm660-gold-saw2-v4.1-l2
+          - qcom,sdm660-silver-saw2-v4.1-l2
+          - qcom,msm8998-gold-saw2-v4.1-l2
+          - qcom,msm8998-silver-saw2-v4.1-l2
+          - qcom,msm8909-saw2-v3.0-cpu
+          - qcom,msm8916-saw2-v3.0-cpu
+          - qcom,msm8939-saw2-v3.0-cpu
+          - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,msm8976-gold-saw2-v2.3-l2
+          - qcom,msm8976-silver-saw2-v2.3-l2
+          - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8064-saw2-v1.1-cpu
+      - const: qcom,saw2
+
+  reg:
+    description: Base address and size of the SPM register region
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo";
+            device_type = "cpu";
+            enable-method = "qcom,kpss-acc-v2";
+            qcom,saw = <&saw0>;
+            reg = <0x0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    saw0: power-manager@f9089000 {
+        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+        reg = <0xf9089000 0x1000>;
+    };
+
+  - |
+
+    /*
+     * Example 2: New-gen multi cluster SoC using SAW only for L2;
+     * This does not require any cpuidle driver, nor any cpu phandle.
+     */
+    power-manager@17812000 {
+        compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17812000 0x1000>;
+    };
+
+    power-manager@17912000 {
+        compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17912000 0x1000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
new file mode 100644
index 0000000000..74bb92e315
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM
+  radio block, all using SMD as command channels.
+
+properties:
+  compatible:
+    const: qcom,wcnss
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: wlan/prima/WCNSS_qcom_wlan_nv.bin
+    description:
+      Relative firmware image path for the WLAN NV blob.
+
+  qcom,mmio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to a node specifying the wcnss "ccu" and "dxe" register blocks.
+      The node must be compatible with one of the following::
+           - qcom,riva"
+           - qcom,pronto"
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string
+    const: WCNSS_CTRL
+    description:
+      Standard SMD property specifying the SMD channel used for communication
+      with the WiFi firmware.
+
+  bluetooth:
+    type: object
+    additionalProperties: false
+    allOf:
+      - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml#
+    properties:
+      compatible:
+        const: qcom,wcnss-bt
+
+      local-bd-address: true
+
+    required:
+      - compatible
+
+  wifi:
+    additionalProperties: false
+    type: object
+    properties:
+      compatible:
+        const: qcom,wcnss-wlan
+
+      interrupts:
+        maxItems: 2
+
+      interrupt-names:
+        items:
+          - const: tx
+          - const: rx
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 2
+        description:
+          Should reference the tx-enable and tx-rings-empty SMEM states.
+
+      qcom,smem-state-names:
+        items:
+          - const: tx-enable
+          - const: tx-rings-empty
+        description:
+          Names of SMEM states.
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - qcom,smem-states
+      - qcom,smem-state-names
+
+required:
+  - compatible
+  - qcom,mmio
+  - qcom,smd-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    smd-edge {
+        interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+        qcom,ipc = <&apcs 8 17>;
+        qcom,smd-edge = <6>;
+        qcom,remote-pid = <4>;
+
+        label = "pronto";
+
+        wcnss {
+            compatible = "qcom,wcnss";
+            qcom,smd-channels = "WCNSS_CTRL";
+
+            qcom,mmio = <&pronto>;
+
+            bluetooth {
+                compatible = "qcom,wcnss-bt";
+                /* BD address 00:11:22:33:44:55 */
+                local-bd-address = [ 55 44 33 22 11 00 ];
+            };
+
+            wifi {
+                compatible = "qcom,wcnss-wlan";
+
+                interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "tx", "rx";
+
+                qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
new file mode 100644
index 0000000000..96a7f18220
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Stats
+
+maintainers:
+  - Maulik Shah <quic_mkshah@quicinc.com>
+
+description:
+  Always On Processor/Resource Power Manager maintains statistics of the SoC
+  sleep modes involving powering down of the rails and oscillator clock.
+
+  Statistics includes SoC sleep mode type, number of times low power mode were
+  entered, time of last entry, time of last exit and accumulated sleep duration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpmh-stats
+      - qcom,sdm845-rpmh-stats
+      - qcom,rpm-stats
+      # For older RPM firmware versions with fixed offset for the sleep stats
+      - qcom,apq8084-rpm-stats
+      - qcom,msm8226-rpm-stats
+      - qcom,msm8916-rpm-stats
+      - qcom,msm8974-rpm-stats
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Example of rpmh sleep stats
+  - |
+    sram@c3f0000 {
+      compatible = "qcom,rpmh-stats";
+      reg = <0x0c3f0000 0x400>;
+    };
+  # Example of rpm sleep stats
+  - |
+    sram@4690000 {
+      compatible = "qcom,rpm-stats";
+      reg = <0x04690000 0x10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml
new file mode 100644
index 0000000000..1cac3cb522
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g011-sys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M System Configuration (SYS)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The RZ/V2M-alike SYS (System Configuration) controls the overall
+  configuration of the LSI and supports the following functions,
+  - Bank address settings for DMAC
+  - Bank address settings of the units for ICB
+  - ETHER AxCACHE[1] (C bit) control function
+  - RAMA initialization control
+  - MD[7:0] pin monitoring
+  - LSI version
+  - PCIe related settings
+  - WDT stop control
+  - Temperature sensor (TSU) monitor
+
+properties:
+  compatible:
+    const: renesas,r9a09g011-sys
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sys: system-controller@a3f03000 {
+      compatible = "renesas,r9a09g011-sys";
+      reg = <0xa3f03000 0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
new file mode 100644
index 0000000000..e52e176d8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} System Controller (SYSC)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of
+  the LSI and supports following functions,
+  - External terminal state capture function
+  - 34-bit address space access function
+  - Low power consumption control
+  - WDT stop control
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five
+      - renesas,r9a07g044-sysc # RZ/G2{L,LC}
+      - renesas,r9a07g054-sysc # RZ/V2L
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: CA55/CM33 Sleep/Software Standby Mode request interrupt
+      - description: CA55 Software Standby Mode release request interrupt
+      - description: CM33 Software Standby Mode release request interrupt
+      - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt
+
+  interrupt-names:
+    items:
+      - const: lpm_int
+      - const: ca55stbydone_int
+      - const: cm33stbyr_int
+      - const: ca55_deny
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sysc: system-controller@11020000 {
+            compatible = "renesas,r9a07g044-sysc";
+            reg = <0x11020000 0x10000>;
+            interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int",
+                              "ca55_deny";
+    };
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzv2m-pwc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzv2m-pwc.yaml
new file mode 100644
index 0000000000..12df33f584
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzv2m-pwc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas,rzv2m-pwc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M External Power Sequence Controller (PWC)
+
+description: |+
+  The PWC IP found in the RZ/V2M family of chips comes with the below
+  capabilities
+    - external power supply on/off sequence generation
+    - on/off signal generation for the LPDDR4 core power supply (LPVDD)
+    - key input signals processing
+    - general-purpose output pins
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a09g011-pwc # RZ/V2M
+          - renesas,r9a09g055-pwc # RZ/V2MA
+      - const: renesas,rzv2m-pwc
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  renesas,rzv2m-pwc-power:
+    description: The PWC is used to control the system power supplies.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    pwc: pwc@a3700000 {
+      compatible = "renesas,r9a09g011-pwc", "renesas,rzv2m-pwc";
+      reg = <0xa3700000 0x800>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      renesas,rzv2m-pwc-power;
+    };
diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
new file mode 100644
index 0000000000..53b95f348f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml
@@ -0,0 +1,479 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH-Mobile, R-Mobile, and R-Car Platform
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Emma Mobile EV2
+        items:
+          - enum:
+              - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual
+          - const: renesas,emev2
+
+      - description: RZ/A1H (R7S72100)
+        items:
+          - enum:
+              - renesas,genmai # Genmai (RTK772100BC00000BR)
+              - renesas,gr-peach # GR-Peach (X28A-M01-E/F)
+              - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE)
+          - const: renesas,r7s72100
+
+      - description: RZ/A2 (R7S9210)
+        items:
+          - enum:
+              - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE)
+          - const: renesas,r7s9210
+
+      - description: SH-Mobile AG5 (R8A73A00/SH73A0)
+        items:
+          - enum:
+              - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT
+          - const: renesas,sh73a0
+
+      - description: R-Mobile APE6 (R8A73A40)
+        items:
+          - enum:
+              - renesas,ape6evm
+          - const: renesas,r8a73a4
+
+      - description: R-Mobile A1 (R8A77400)
+        items:
+          - enum:
+              - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA
+          - const: renesas,r8a7740
+
+      - description: RZ/G1H (R8A77420)
+        items:
+          - enum:
+              # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven)
+              - iwave,g21m
+          - const: renesas,r8a7742
+
+      - items:
+          - enum:
+              # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven)
+              - iwave,g21d
+          - const: iwave,g21m
+          - const: renesas,r8a7742
+
+      - description: RZ/G1M (R8A77430)
+        items:
+          - enum:
+              # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
+              - iwave,g20d
+          - const: iwave,g20m
+          - const: renesas,r8a7743
+
+      - items:
+          - enum:
+              # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
+              - iwave,g20m
+              - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE)
+          - const: renesas,r8a7743
+
+      - description: RZ/G1N (R8A77440)
+        items:
+          - enum:
+              # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
+              - iwave,g20d
+          - const: iwave,g20m
+          - const: renesas,r8a7744
+
+      - items:
+          - enum:
+              # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
+              - iwave,g20m
+          - const: renesas,r8a7744
+
+      - description: RZ/G1E (R8A77450)
+        items:
+          - enum:
+              - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
+              - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE)
+          - const: renesas,r8a7745
+
+      - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
+        items:
+          - const: iwave,g22d
+          - const: iwave,g22m
+          - const: renesas,r8a7745
+
+      - description: RZ/G1C (R8A77470)
+        items:
+          - enum:
+              - iwave,g23s # iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
+          - const: renesas,r8a77470
+
+      - description: RZ/G2M (R8A774A1)
+        items:
+          - enum:
+              - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
+              - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit
+          - const: renesas,r8a774a1
+
+      - items:
+          - enum:
+              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+          - const: hoperun,hihope-rzg2m
+          - const: renesas,r8a774a1
+
+      - description: RZ/G2N (R8A774B1)
+        items:
+          - enum:
+              - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit
+              - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform
+          - const: renesas,r8a774b1
+
+      - items:
+          - enum:
+              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+          - const: hoperun,hihope-rzg2n
+          - const: renesas,r8a774b1
+
+      - description: RZ/G2E (R8A774C0)
+        items:
+          - enum:
+              - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874)
+          - const: renesas,r8a774c0
+
+      - items:
+          - enum:
+              - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875)
+          - const: si-linux,cat874
+          - const: renesas,r8a774c0
+
+      - description: RZ/G2H (R8A774E1)
+        items:
+          - enum:
+              - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit
+              - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform
+          - const: renesas,r8a774e1
+
+      - items:
+          - enum:
+              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+          - const: hoperun,hihope-rzg2h
+          - const: renesas,r8a774e1
+
+      - description: R-Car M1A (R8A77781)
+        items:
+          - enum:
+              - renesas,bockw
+          - const: renesas,r8a7778
+
+      - description: R-Car H1 (R8A77790)
+        items:
+          - enum:
+              - renesas,marzen # Marzen (R0P7779A00010S)
+          - const: renesas,r8a7779
+
+      - description: R-Car H2 (R8A77900)
+        items:
+          - enum:
+              - renesas,lager # Lager (RTP0RC7790SEB00010S)
+              - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
+          - const: renesas,r8a7790
+
+      - description: R-Car M2-W (R8A77910)
+        items:
+          - enum:
+              - renesas,henninger
+              - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S)
+              - renesas,porter # Porter (M2-LCDP)
+          - const: renesas,r8a7791
+
+      - description: R-Car V2H (R8A77920)
+        items:
+          - enum:
+              - renesas,blanche # Blanche (RTP0RC7792SEB00010S)
+              - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE)
+          - const: renesas,r8a7792
+
+      - description: R-Car M2-N (R8A77930)
+        items:
+          - enum:
+              - renesas,gose # Gose (RTP0RC7793SEB00010S)
+          - const: renesas,r8a7793
+
+      - description: R-Car E2 (R8A77940)
+        items:
+          - enum:
+              - renesas,alt # Alt (RTP0RC7794SEB00010S)
+              - renesas,silk # SILK (RTP0RC7794LCB00011S)
+          - const: renesas,r8a7794
+
+      # Note: R-Car H3 ES1.* (R8A77950) is not supported upstream anymore!
+
+      - description: R-Car H3 ES2.0 and later (R8A77951)
+        items:
+          - enum:
+              - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
+              - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
+          - const: renesas,r8a7795
+
+      - description: R-Car M3-W (R8A77960)
+        items:
+          - enum:
+              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
+              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
+          - const: renesas,r8a7796
+
+      - description: R-Car M3-W+ (R8A77961)
+        items:
+          - enum:
+              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0))
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A)
+          - const: renesas,r8a77961
+
+      - description: Kingfisher (SBEV-RCAR-KF-M03)
+        oneOf:
+          - items:
+              - const: shimafuji,kingfisher
+              - enum:
+                  - renesas,h3ulcb
+                  - renesas,m3ulcb
+                  - renesas,m3nulcb
+              - enum:
+                  - renesas,r8a7795
+                  - renesas,r8a7796
+                  - renesas,r8a77961
+                  - renesas,r8a77965
+          - items:
+              - const: shimafuji,kingfisher
+              - enum:
+                  - renesas,h3ulcb
+                  - renesas,m3ulcb
+                  - renesas,m3nulcb
+              - enum:
+                  - renesas,r8a779m0
+                  - renesas,r8a779m1
+                  - renesas,r8a779m2
+                  - renesas,r8a779m3
+                  - renesas,r8a779m4
+                  - renesas,r8a779m5
+                  - renesas,r8a779m8
+                  - renesas,r8a779mb
+              - enum:
+                  - renesas,r8a7795
+                  - renesas,r8a77961
+                  - renesas,r8a77965
+
+      - description: R-Car M3-N (R8A77965)
+        items:
+          - enum:
+              - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N))
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
+          - const: renesas,r8a77965
+
+      - description: R-Car V3M (R8A77970)
+        items:
+          - enum:
+              - renesas,eagle # Eagle (RTP0RC77970SEB0010S)
+              - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10)
+          - const: renesas,r8a77970
+
+      - description: R-Car V3H (R8A77980)
+        items:
+          - enum:
+              - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
+              - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
+          - const: renesas,r8a77980
+
+      - description: R-Car V3H2 (R8A77980A)
+        items:
+          - enum:
+              - renesas,condor-i # Condor-I (RTP0RC77980SEBS012SA01)
+          - const: renesas,r8a77980a
+          - const: renesas,r8a77980
+
+      - description: R-Car E3 (R8A77990)
+        items:
+          - enum:
+              - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S)
+          - const: renesas,r8a77990
+
+      - description: R-Car D3 (R8A77995)
+        items:
+          - enum:
+              - renesas,draak # Draak (RTP0RC77995SEB0010S)
+          - const: renesas,r8a77995
+
+      - description: R-Car V3U (R8A779A0)
+        items:
+          - enum:
+              - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
+          - const: renesas,r8a779a0
+
+      - items:
+          - enum:
+              - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
+          - const: renesas,falcon-cpu
+          - const: renesas,r8a779a0
+
+      - description: R-Car S4-8 (R8A779F0)
+        items:
+          - enum:
+              - renesas,spider-cpu # Spider CPU board (RTP8A779F0ASKB0SC2S)
+          - const: renesas,r8a779f0
+
+      - items:
+          - enum:
+              - renesas,spider-breakout # Spider BreakOut board (RTP8A779F0ASKB0SB0S)
+          - const: renesas,spider-cpu
+          - const: renesas,r8a779f0
+
+      - description: R-Car V4H (R8A779G0)
+        items:
+          - enum:
+              - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
+          - const: renesas,r8a779g0
+
+      - items:
+          - enum:
+              - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
+          - const: renesas,white-hawk-cpu
+          - const: renesas,r8a779g0
+
+      - description: R-Car H3e (R8A779M0)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m0
+          - const: renesas,r8a7795
+
+      - description: R-Car H3e-2G (R8A779M1)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m1
+          - const: renesas,r8a7795
+
+      - description: R-Car M3e (R8A779M2)
+        items:
+          - enum:
+              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m2
+          - const: renesas,r8a77961
+
+      - description: R-Car M3e-2G (R8A779M3)
+        items:
+          - enum:
+              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m3
+          - const: renesas,r8a77961
+
+      - description: R-Car M3Ne (R8A779M4)
+        items:
+          - enum:
+              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m4
+          - const: renesas,r8a77965
+
+      - description: R-Car M3Ne-2G (R8A779M5)
+        items:
+          - enum:
+              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m5
+          - const: renesas,r8a77965
+
+      - description: R-Car E3e (R8A779M6)
+        items:
+          - enum:
+              - renesas,ebisu       # Ebisu
+          - const: renesas,r8a779m6
+          - const: renesas,r8a77990
+
+      - description: R-Car D3e (R8A779M7)
+        items:
+          - enum:
+              - renesas,draak       # Draak
+          - const: renesas,r8a779m7
+          - const: renesas,r8a77995
+
+      - description: R-Car H3Ne (R8A779M8)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m8
+          - const: renesas,r8a7795
+
+      - description: R-Car H3Ne-1.7G (R8A779MB)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779mb
+          - const: renesas,r8a7795
+
+      - description: RZ/N1D (R9A06G032)
+        items:
+          - enum:
+              - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
+          - const: renesas,r9a06g032
+
+      - description: RZ/N1{D,S} EB
+        items:
+          - enum:
+              - renesas,rzn1d400-eb # RZN1D-EB (Expansion Board when using a RZN1D-DB)
+          - const: renesas,rzn1d400-db
+          - const: renesas,r9a06g032
+
+      - description: RZ/Five and RZ/G2UL (R9A07G043)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g043f01 # RZ/Five
+              - renesas,r9a07g043u11 # RZ/G2UL Type-1
+              - renesas,r9a07g043u12 # RZ/G2UL Type-2
+          - const: renesas,r9a07g043
+
+      - description: RZ/G2{L,LC} (R9A07G044)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
+              - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
+              - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L
+              - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
+          - const: renesas,r9a07g044
+
+      - description: RZ/V2L (R9A07G054)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L
+              - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
+          - const: renesas,r9a07g054
+
+      - description: RZ/V2M (R9A09G011)
+        items:
+          - enum:
+              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
+          - const: renesas,r9a09g011
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
new file mode 100644
index 0000000000..e4fa6a07b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3288-sgrf
+              - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
+              - rockchip,rk3568-pipe-grf
+              - rockchip,rk3568-pipe-phy-grf
+              - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-bigcore0-grf
+              - rockchip,rk3588-bigcore1-grf
+              - rockchip,rk3588-ioc
+              - rockchip,rk3588-php-grf
+              - rockchip,rk3588-pipe-phy-grf
+              - rockchip,rk3588-sys-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rv1108-usbgrf
+          - const: syscon
+      - items:
+          - enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3036-grf
+              - rockchip,rk3066-grf
+              - rockchip,rk3128-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3308-core-grf
+              - rockchip,rk3308-detect-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3308-usb2phy-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-grf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rk3588-usb2phy-grf
+              - rockchip,rv1108-grf
+              - rockchip,rv1108-pmugrf
+              - rockchip,rv1126-grf
+              - rockchip,rv1126-pmugrf
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-grf
+
+    then:
+      properties:
+        lvds:
+          type: object
+
+          $ref: /schemas/display/rockchip/rockchip,lvds.yaml#
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-grf
+
+    then:
+      properties:
+        edp-phy:
+          type: object
+          $ref: /schemas/phy/rockchip,rk3288-dp-phy.yaml#
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3066-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3288-grf
+
+    then:
+      properties:
+        usbphy:
+          type: object
+
+          $ref: /schemas/phy/rockchip-usb-phy.yaml#
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-grf
+
+    then:
+      properties:
+        gpio:
+          type: object
+
+          $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
+
+          unevaluatedProperties: false
+
+        power-controller:
+          type: object
+
+          $ref: /schemas/power/rockchip,power-controller.yaml#
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-grf
+
+    then:
+      properties:
+        mipi-dphy-rx0:
+          type: object
+
+          $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml#
+
+          unevaluatedProperties: false
+
+        pcie-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+      patternProperties:
+        "phy@[0-9a-f]+$":
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,rk3036-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3368-pmugrf
+
+    then:
+      properties:
+        reboot-mode:
+          type: object
+
+          $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3128-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3308-usb2phy-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3399-grf
+              - rockchip,rk3588-usb2phy-grf
+              - rockchip,rv1108-grf
+
+    then:
+      required:
+        - "#address-cells"
+        - "#size-cells"
+
+      patternProperties:
+        "usb2phy@[0-9a-f]+$":
+          type: object
+
+          $ref: /schemas/phy/rockchip,inno-usb2phy.yaml#
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,rk3188-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rv1108-grf
+              - rockchip,rv1108-pmugrf
+
+    then:
+      properties:
+        io-domains:
+          type: object
+
+          $ref: /schemas/power/rockchip-io-domain.yaml#
+
+          unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    grf: syscon@ff770000 {
+      compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+      reg = <0xff770000 0x10000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+      };
+
+      u2phy0: usb2phy@e450 {
+        compatible = "rockchip,rk3399-usb2phy";
+        reg = <0xe450 0x10>;
+        clocks = <&cru SCLK_USB2PHY0_REF>;
+        clock-names = "phyclk";
+        #clock-cells = <0>;
+        clock-output-names = "clk_usbphy0_480m";
+
+        u2phy0_host: host-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "linestate";
+         };
+
+        u2phy0_otg: otg-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "otg-bvalid", "otg-id",
+                            "linestate";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
new file mode 100644
index 0000000000..e1d716df5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/exynos-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Power Management Unit (PMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+# Custom select to avoid matching all nodes with 'syscon'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos3250-pmu
+          - samsung,exynos4210-pmu
+          - samsung,exynos4212-pmu
+          - samsung,exynos4412-pmu
+          - samsung,exynos5250-pmu
+          - samsung,exynos5260-pmu
+          - samsung,exynos5410-pmu
+          - samsung,exynos5420-pmu
+          - samsung,exynos5433-pmu
+          - samsung,exynos7-pmu
+          - samsung,exynos850-pmu
+          - samsung-s5pv210-pmu
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5260-pmu
+              - samsung,exynos5410-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+              - samsung,exynos7-pmu
+              - samsung,exynos850-pmu
+              - samsung-s5pv210-pmu
+          - const: syscon
+      - items:
+          - enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+          - const: simple-mfd
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clock-names:
+    description:
+      List of clock names for particular CLKOUT mux inputs
+    minItems: 1
+    maxItems: 32
+    items:
+      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
+
+  clocks:
+    minItems: 1
+    maxItems: 32
+
+  dp-phy:
+    $ref: /schemas/phy/samsung,dp-video-phy.yaml
+    unevaluatedProperties: false
+
+  interrupt-controller:
+    description:
+      Some PMUs are capable of behaving as an interrupt controller (mostly
+      to wake up a suspended PMU).
+
+  '#interrupt-cells':
+    description:
+      Must be identical to the that of the parent interrupt controller.
+    const: 3
+
+  mipi-phy:
+    $ref: /schemas/phy/samsung,mipi-video-phy.yaml
+    unevaluatedProperties: false
+
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml
+    type: object
+    description:
+      Reboot mode to alter bootloader behavior for the next boot
+
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5410-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+    then:
+      required:
+        - '#clock-cells'
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-pmu
+              - samsung,exynos4210-pmu
+              - samsung,exynos4212-pmu
+              - samsung,exynos4412-pmu
+              - samsung,exynos5250-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+    then:
+      properties:
+        mipi-phy: true
+    else:
+      properties:
+        mipi-phy: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-pmu
+              - samsung,exynos5420-pmu
+              - samsung,exynos5433-pmu
+    then:
+      properties:
+        dp-phy: true
+    else:
+      properties:
+        dp-phy: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    pmu_system_controller: system-controller@10040000 {
+        compatible = "samsung,exynos5250-pmu", "syscon";
+        reg = <0x10040000 0x5000>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        interrupt-parent = <&gic>;
+        #clock-cells = <1>;
+        clock-names = "clkout16";
+        clocks = <&clock CLK_FIN_PLL>;
+
+        dp-phy {
+            compatible = "samsung,exynos5250-dp-video-phy";
+            #phy-cells = <0>;
+        };
+
+        mipi-phy {
+            compatible = "samsung,s5pv210-mipi-video-phy";
+            #phy-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
new file mode 100644
index 0000000000..a6836904a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's Exynos USI (Universal Serial Interface)
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
+  USI shares almost all internal circuits within each protocol, so only one
+  protocol can be chosen at a time. USI is modeled as a node with zero or more
+  child nodes, each representing a serial sub-node device. The mode setting
+  selects which particular function will be used.
+
+properties:
+  $nodename:
+    pattern: "^usi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - const: samsung,exynosautov9-usi
+          - const: samsung,exynos850-usi
+      - enum:
+          - samsung,exynos850-usi
+
+  reg: true
+
+  clocks: true
+
+  clock-names: true
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register syscon node
+          - description: offset of SW_CONF register for this USI controller
+    description:
+      Should be phandle/offset pair. The phandle to System Register syscon node
+      (for the same domain where this USI controller resides) and the offset
+      of SW_CONF register for this USI controller.
+
+  samsung,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Selects USI function (which serial protocol to use). Refer to
+      <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values.
+
+  samsung,clkreq-on:
+    type: boolean
+    description:
+      Enable this property if underlying protocol requires the clock to be
+      continuously provided without automatic gating. As suggested by SoC
+      manual, it should be set in case of SPI/I2C slave, UART Rx and I2C
+      multi-master mode. Usually this property is needed if USI mode is set
+      to "UART".
+
+      This property is optional.
+
+patternProperties:
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/i2c-exynos5.yaml
+    description: Child node describing underlying I2C
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+    description: Child node describing underlying UART/serial
+
+  "^spi@[0-9a-f]+$":
+    $ref: /schemas/spi/samsung,spi.yaml
+    description: Child node describing underlying SPI
+
+required:
+  - compatible
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - samsung,sysreg
+  - samsung,mode
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - samsung,exynos850-usi
+
+then:
+  properties:
+    reg:
+      maxItems: 1
+
+    clocks:
+      items:
+        - description: Bus (APB) clock
+        - description: Operating clock for UART/SPI/I2C protocol
+
+    clock-names:
+      items:
+        - const: pclk
+        - const: ipclk
+
+  required:
+    - reg
+    - clocks
+    - clock-names
+
+else:
+  properties:
+    reg: false
+    clocks: false
+    clock-names: false
+    samsung,clkreq-on: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/samsung,exynos-usi.h>
+
+    usi0: usi@138200c0 {
+        compatible = "samsung,exynos850-usi";
+        reg = <0x138200c0 0x20>;
+        samsung,sysreg = <&sysreg_peri 0x1010>;
+        samsung,mode = <USI_V2_UART>;
+        samsung,clkreq-on; /* needed for UART mode */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+        clock-names = "pclk", "ipclk";
+
+        serial_0: serial@13820000 {
+            compatible = "samsung,exynos850-uart";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_peri 32>, <&cmu_peri 31>;
+            clock-names = "uart", "clk_uart_baud0";
+            status = "disabled";
+        };
+
+        hsi2c_0: i2c@13820000 {
+            compatible = "samsung,exynosautov9-hsi2c";
+            reg = <0x13820000 0xc0>;
+            interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_peri 31>, <&cmu_peri 32>;
+            clock-names = "hsi2c", "hsi2c_pclk";
+            status = "disabled";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
new file mode 100644
index 0000000000..163e912e9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/samsung/samsung,exynos-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series System Registers (SYSREG)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos3-sysreg
+              - samsung,exynos4-sysreg
+              - samsung,exynos5-sysreg
+              - tesla,fsd-cam-sysreg
+              - tesla,fsd-fsys0-sysreg
+              - tesla,fsd-fsys1-sysreg
+              - tesla,fsd-peric-sysreg
+          - const: syscon
+      - items:
+          - enum:
+              - samsung,exynos5433-cam0-sysreg
+              - samsung,exynos5433-cam1-sysreg
+              - samsung,exynos5433-disp-sysreg
+              - samsung,exynos5433-fsys-sysreg
+          - const: samsung,exynos5433-sysreg
+          - const: syscon
+      - items:
+          - enum:
+              - samsung,exynos5433-sysreg
+              - samsung,exynos850-sysreg
+              - samsung,exynosautov9-sysreg
+          - const: syscon
+        deprecated: true
+      - items:
+          - enum:
+              - samsung,exynos850-cmgp-sysreg
+              - samsung,exynos850-peri-sysreg
+          - const: samsung,exynos850-sysreg
+          - const: syscon
+      - items:
+          - enum:
+              - samsung,exynosautov9-fsys2-sysreg
+              - samsung,exynosautov9-peric0-sysreg
+              - samsung,exynosautov9-peric1-sysreg
+          - const: samsung,exynosautov9-sysreg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-cmgp-sysreg
+              - samsung,exynos850-peri-sysreg
+              - samsung,exynos850-sysreg
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+additionalProperties: false
+
+examples:
+  - |
+    system-controller@10010000 {
+        compatible = "samsung,exynos4-sysreg", "syscon";
+        reg = <0x10010000 0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
new file mode 100644
index 0000000000..32d9cc2d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier ADAMV block
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  ADAMV block implemented on Socionext UniPhier SoCs is an analog signal
+  amplifier that is a part of the external video and audio I/O system.
+
+  This block is defined for controlling audio I/O reset only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld11-adamv
+          - socionext,uniphier-ld20-adamv
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@57920000 {
+        compatible = "socionext,uniphier-ld20-adamv",
+                     "simple-mfd", "syscon";
+        reg = <0x57920000 0x1000>;
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-adamv-reset";
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
new file mode 100644
index 0000000000..09f861cc06
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-ahci-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC AHCI glue layer
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  AHCI glue layer implemented on Socionext UniPhier SoCs is a sideband
+  logic handling signals to AHCI host controller inside AHCI component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-ahci-glue
+          - socionext,uniphier-pxs2-ahci-glue
+          - socionext,uniphier-pxs3-ahci-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "phy@[0-9a-f]+$":
+    $ref: /schemas/phy/socionext,uniphier-ahci-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sata-controller@65700000 {
+        compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65700000 0x100>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-pxs3-ahci-reset";
+            reg = <0x0 0x4>;
+            clock-names = "link";
+            clocks = <&sys_clk 28>;
+            reset-names = "link";
+            resets = <&sys_rst 28>;
+            #reset-cells = <1>;
+        };
+
+        phy@10 {
+            compatible = "socionext,uniphier-pxs3-ahci-phy";
+            reg = <0x10 0x10>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 28>, <&sys_clk 30>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 28>, <&sys_rst 30>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
new file mode 100644
index 0000000000..bd0def7236
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC DWC3 USB3.0 glue layer
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is
+  a sideband logic handling signals to DWC3 host controller inside
+  USB3.0 component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro4-dwc3-glue
+          - socionext,uniphier-pro5-dwc3-glue
+          - socionext,uniphier-pxs2-dwc3-glue
+          - socionext,uniphier-ld20-dwc3-glue
+          - socionext,uniphier-pxs3-dwc3-glue
+          - socionext,uniphier-nx1-dwc3-glue
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^reset-controller@[0-9a-f]+$":
+    $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml#
+
+  "^regulator@[0-9a-f]+$":
+    $ref: /schemas/regulator/socionext,uniphier-regulator.yaml#
+
+  "^phy@[0-9a-f]+$":
+    oneOf:
+      - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
+      - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@65b00000 {
+        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
+        reg = <0x65b00000 0x400>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        reset-controller@0 {
+            compatible = "socionext,uniphier-ld20-usb3-reset";
+            reg = <0x0 0x4>;
+            #reset-cells = <1>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+
+        regulator@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+
+        phy@200 {
+            compatible = "socionext,uniphier-ld20-usb3-hsphy";
+            reg = <0x200 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 16>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 16>;
+        };
+
+        phy@300 {
+            compatible = "socionext,uniphier-ld20-usb3-ssphy";
+            reg = <0x300 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 14>, <&sys_clk 18>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 14>, <&sys_rst 18>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
new file mode 100644
index 0000000000..2cc38bb503
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-mioctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier media I/O block (MIO) controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  Media I/O block implemented on Socionext UniPhier SoCs is a legacy
+  integrated component of the stream type peripherals including USB2.0,
+  SD/eMMC, and MIO-DMAC.
+  Media I/O block has a common logic to control the component.
+
+  Recent SoCs have SD interface logic specialized only for SD functions
+  as a subset of media I/O block. See socionext,uniphier-sdctrl.yaml.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-mioctrl
+          - socionext,uniphier-pro4-mioctrl
+          - socionext,uniphier-sld8-mioctrl
+          - socionext,uniphier-ld11-mioctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5b3e0000 {
+        compatible = "socionext,uniphier-ld11-mioctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x5b3e0000 0x800>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld11-mio-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld11-mio-reset";
+            #reset-cells = <1>;
+            resets = <&sys_rst 7>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
new file mode 100644
index 0000000000..0adcffe859
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-perictrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier peripheral block controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  Peripheral block implemented on Socionext UniPhier SoCs is an integrated
+  component of the peripherals including UART, I2C/FI2C, and SCSSI.
+  Peripheral block controller is a logic to control the component.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-perictrl
+          - socionext,uniphier-pro4-perictrl
+          - socionext,uniphier-pro5-perictrl
+          - socionext,uniphier-pxs2-perictrl
+          - socionext,uniphier-sld8-perictrl
+          - socionext,uniphier-ld11-perictrl
+          - socionext,uniphier-ld20-perictrl
+          - socionext,uniphier-pxs3-perictrl
+          - socionext,uniphier-nx1-perictrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@59820000 {
+        compatible = "socionext,uniphier-ld20-perictrl",
+                     "simple-mfd", "syscon";
+        reg = <0x59820000 0x200>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-peri-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-peri-reset";
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
new file mode 100644
index 0000000000..cb3b0d4273
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sdctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SD interface logic
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SD interface logic implemented on Socionext UniPhier SoCs is
+  attached outside SDHC, and has some SD related functions such as
+  clock control, reset control, mode switch, and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-pro5-sdctrl
+          - socionext,uniphier-pxs2-sdctrl
+          - socionext,uniphier-ld11-sdctrl
+          - socionext,uniphier-ld20-sdctrl
+          - socionext,uniphier-pxs3-sdctrl
+          - socionext,uniphier-nx1-sdctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@59810000 {
+        compatible = "socionext,uniphier-ld20-sdctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x59810000 0x400>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-sd-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-sd-reset";
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
new file mode 100644
index 0000000000..1341544d1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC-glue logic debug part
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SoC-glue logic debug part implemented on Socionext UniPhier SoCs is
+  a collection of miscellaneous function registers handling signals outside
+  system components for debug and monitor use.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-soc-glue-debug
+          - socionext,uniphier-pro4-soc-glue-debug
+          - socionext,uniphier-pro5-soc-glue-debug
+          - socionext,uniphier-pxs2-soc-glue-debug
+          - socionext,uniphier-sld8-soc-glue-debug
+          - socionext,uniphier-ld11-soc-glue-debug
+          - socionext,uniphier-ld20-soc-glue-debug
+          - socionext,uniphier-pxs3-soc-glue-debug
+          - socionext,uniphier-nx1-soc-glue-debug
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^efuse@[0-9a-f]+$":
+    $ref: /schemas/nvmem/socionext,uniphier-efuse.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5f900000 {
+        compatible = "socionext,uniphier-pxs2-soc-glue-debug",
+                     "simple-mfd", "syscon";
+        reg = <0x5f900000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5f900000 0x2000>;
+
+        efuse@100 {
+            compatible = "socionext,uniphier-efuse";
+            reg = <0x100 0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
new file mode 100644
index 0000000000..7845dcfca9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SoC-glue logic
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  SoC-glue logic implemented on Socionext UniPhier SoCs is a collection of
+  miscellaneous function registers handling signals outside system components.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-soc-glue
+          - socionext,uniphier-pro4-soc-glue
+          - socionext,uniphier-pro5-soc-glue
+          - socionext,uniphier-pxs2-soc-glue
+          - socionext,uniphier-sld8-soc-glue
+          - socionext,uniphier-ld11-soc-glue
+          - socionext,uniphier-ld20-soc-glue
+          - socionext,uniphier-pxs3-soc-glue
+          - socionext,uniphier-nx1-soc-glue
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  pinctrl:
+    $ref: /schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+
+  usb-hub:
+    $ref: /schemas/phy/socionext,uniphier-usb2-phy.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - socionext,uniphier-pro4-soc-glue
+                - socionext,uniphier-ld11-soc-glue
+    then:
+      properties:
+        usb-hub: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: socionext,uniphier-pro4-soc-glue
+    then:
+      properties:
+        clock-controller: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@5f800000 {
+        compatible = "socionext,uniphier-pro4-soc-glue",
+                     "simple-mfd", "syscon";
+        reg = <0x5f800000 0x2000>;
+
+        pinctrl {
+            compatible = "socionext,uniphier-pro4-pinctrl";
+        };
+
+        usb-hub {
+            compatible = "socionext,uniphier-pro4-usb2-phy";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy@0 {
+                reg = <0>;
+                #phy-cells = <0>;
+            };
+
+            phy@1 {
+                reg = <1>;
+                #phy-cells = <0>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                #phy-cells = <0>;
+            };
+
+            phy@3 {
+                reg = <3>;
+                #phy-cells = <0>;
+            };
+        };
+
+        clock-controller {
+            compatible = "socionext,uniphier-pro4-sg-clock";
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml
new file mode 100644
index 0000000000..3acb14201d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier system controller
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+description: |+
+  System controller implemented on Socionext UniPhier SoCs has multiple
+  functions such as clock control, reset control, internal watchdog timer,
+  thermal management, and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - socionext,uniphier-ld4-sysctrl
+          - socionext,uniphier-pro4-sysctrl
+          - socionext,uniphier-pro5-sysctrl
+          - socionext,uniphier-pxs2-sysctrl
+          - socionext,uniphier-sld8-sysctrl
+          - socionext,uniphier-ld11-sysctrl
+          - socionext,uniphier-ld20-sysctrl
+          - socionext,uniphier-pxs3-sysctrl
+          - socionext,uniphier-nx1-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
+
+  reset-controller:
+    $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+  watchdog:
+    $ref: /schemas/watchdog/socionext,uniphier-wdt.yaml#
+
+  thermal-sensor:
+    $ref: /schemas/thermal/socionext,uniphier-thermal.yaml#
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-ld4-sysctrl
+    then:
+      properties:
+        watchdog: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-ld4-sysctrl
+              - socionext,uniphier-pro4-sysctrl
+              - socionext,uniphier-sld8-sysctrl
+              - socionext,uniphier-ld11-sysctrl
+    then:
+      properties:
+        thermal-sensor: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    syscon@61840000 {
+        compatible = "socionext,uniphier-ld20-sysctrl",
+                     "simple-mfd", "syscon";
+        reg = <0x61840000 0x4000>;
+
+        clock-controller {
+            compatible = "socionext,uniphier-ld20-clock";
+            #clock-cells = <1>;
+        };
+
+        reset-controller {
+            compatible = "socionext,uniphier-ld20-reset";
+            #reset-cells = <1>;
+        };
+
+        watchdog {
+            compatible = "socionext,uniphier-wdt";
+        };
+
+        thermal-sensor {
+            compatible = "socionext,uniphier-ld20-thermal";
+            interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
new file mode 100644
index 0000000000..0039319e91
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 SoC system controller
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+description:
+  The StarFive JH7110 SoC system controller provides register information such
+  as offset, mask and shift to configure related modules such as MMC and PCIe.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: starfive,jh7110-sys-syscon
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - starfive,jh7110-aon-syscon
+              - starfive,jh7110-stg-syscon
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    $ref: /schemas/clock/starfive,jh7110-pll.yaml#
+    type: object
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-sys-syscon
+    then:
+      required:
+        - clock-controller
+    else:
+      properties:
+        clock-controller: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-aon-syscon
+    then:
+      required:
+        - "#power-domain-cells"
+    else:
+      properties:
+        "#power-domain-cells": false
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@10240000 {
+        compatible = "starfive,jh7110-stg-syscon", "syscon";
+        reg = <0x10240000 0x1000>;
+    };
+
+    syscon@13030000 {
+        compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+        reg = <0x13030000 0x1000>;
+
+        clock-controller {
+            compatible = "starfive,jh7110-pll";
+            clocks = <&osc>;
+            #clock-cells = <1>;
+        };
+    };
+
+    syscon@17010000 {
+        compatible = "starfive,jh7110-aon-syscon", "syscon";
+        reg = <0x17010000 0x1000>;
+        #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml
new file mode 100644
index 0000000000..d5261ce3a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/tegra/nvidia,nvec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA compliant embedded controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,nvec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: divider clock
+      - description: fast clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: div-clk
+      - const: fast-clk
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: i2c
+
+  clock-frequency: true
+
+  request-gpios:
+    description: phandle to the GPIO used for EC request
+
+  slave-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: I2C address of the slave controller
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - clock-frequency
+  - request-gpios
+  - slave-addr
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@7000c500 {
+        compatible = "nvidia,nvec";
+        reg = <0x7000c500 0x100>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <80000>;
+        request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+        slave-addr = <138>;
+        clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+                 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 67>;
+        reset-names = "i2c";
+    };
diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml
new file mode 100644
index 0000000000..2f7269a26b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-ahb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra AHB
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-ahb
+          - nvidia,tegra30-ahb
+      - items:
+          - enum:
+              - nvidia,tegra114-ahb
+              - nvidia,tegra124-ahb
+              - nvidia,tegra210-ahb
+          - const: nvidia,tegra30-ahb
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    ahb@6000c004 {
+        compatible = "nvidia,tegra20-ahb";
+        reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+    };
diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml
new file mode 100644
index 0000000000..705544b7f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-flowctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Flow Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-flowctrl
+          - nvidia,tegra30-flowctrl
+          - nvidia,tegra114-flowctrl
+          - nvidia,tegra124-flowctrl
+          - nvidia,tegra210-flowctrl
+
+      - items:
+          - const: nvidia,tegra132-flowctrl
+          - const: nvidia,tegra124-flowctrl
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    flow-controller@60007000 {
+        compatible = "nvidia,tegra20-flowctrl";
+        reg = <0x60007000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
new file mode 100644
index 0000000000..158186610c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 NavigatorSS Ring Accelerator
+
+maintainers:
+  - Santosh Shilimkar <ssantosh@kernel.org>
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  The Ring Accelerator (RA) is a machine which converts read/write accesses
+  from/to a constant address into corresponding read/write accesses from/to a
+  circular data structure in memory. The RA eliminates the need for each DMA
+  controller which needs to access ring elements from having to know the current
+  state of the ring (base address, current offset). The DMA controller
+  performs a read or write access to a specific address range (which maps to the
+  source interface on the RA) and the RA replaces the address for the transaction
+  with a new address which corresponds to the head or tail element of the ring
+  (head for reads, tail for writes).
+
+  The Ring Accelerator is a hardware module that is responsible for accelerating
+  management of the packet queues. The K3 SoCs can have more than one RA instances
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: ti,am654-navss-ringacc
+
+  reg:
+    minItems: 4
+    items:
+      - description: real time registers regions
+      - description: fifos registers regions
+      - description: proxy gcfg registers regions
+      - description: proxy target registers regions
+      - description: configuration registers region
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: rt
+      - const: fifos
+      - const: proxy_gcfg
+      - const: proxy_target
+      - const: cfg
+
+  msi-parent: true
+
+  ti,num-rings:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of rings supported by RA
+
+  ti,sci-rm-range-gp-rings:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TI-SCI RM subtype for GP ring range
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,num-rings
+  - ti,sci-rm-range-gp-rings
+  - ti,sci
+  - ti,sci-dev-id
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ringacc: ringacc@3c000000 {
+            compatible = "ti,am654-navss-ringacc";
+            reg = <0x0 0x3c000000 0x0 0x400000>,
+                  <0x0 0x38000000 0x0 0x400000>,
+                  <0x0 0x31120000 0x0 0x100>,
+                  <0x0 0x33000000 0x0 0x40000>,
+                  <0x0 0x31080000 0x0 0x40000>;
+                  reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+            ti,num-rings = <818>;
+            ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <187>;
+            msi-parent = <&inta_main_udmass>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
new file mode 100644
index 0000000000..337c4ea5c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
@@ -0,0 +1,111 @@
+Keystone Navigator DMA Controller
+
+This document explains the device tree bindings for the packet dma
+on keystone devices. The Keystone Navigator DMA driver sets up the dma
+channels and flows for the QMSS(Queue Manager SubSystem) who triggers
+the actual data movements across clients using destination queues. Every
+client modules like  NETCP(Network Coprocessor), SRIO(Serial Rapid IO),
+CRYPTO Engines etc has its own instance of dma hardware. QMSS has also
+an internal packet DMA module which is used as an infrastructure DMA
+with zero copy.
+
+Navigator DMA cloud layout:
+	------------------
+	| Navigator DMAs |
+	------------------
+		|
+		|-> DMA instance #0
+		|
+		|-> DMA instance #1
+			.
+			.
+		|
+		|-> DMA instance #n
+
+Navigator DMA properties:
+Required properties:
+ - compatible: Should be "ti,keystone-navigator-dma"
+ - clocks: phandle to dma instances clocks. The clock handles can be as
+	many as the dma instances. The order should be maintained as per
+	the dma instances.
+ - ti,navigator-cloud-address: Should contain base address for the multi-core
+	navigator cloud and number of addresses depends on SOC integration
+	configuration.. Navigator cloud global address needs to be programmed
+	into DMA and the DMA uses it as the physical addresses to reach queue
+	managers. Note that these addresses though points to queue managers,
+	they are relevant only from DMA perspective. The QMSS may not choose to
+	use them since it has a different address space view to reach all
+	its components.
+
+DMA instance properties:
+Required properties:
+ - reg: Should contain register location and length of the following dma
+	register regions. Register regions should be specified in the following
+	order.
+	- Global control register region (global).
+	- Tx DMA channel configuration register region (txchan).
+	- Rx DMA channel configuration register region (rxchan).
+	- Tx DMA channel Scheduler configuration register region (txsched).
+	- Rx DMA flow configuration register region (rxflow).
+
+Optional properties:
+ - reg-names: Names for the register regions.
+ - ti,enable-all: Enable all DMA channels vs clients opening specific channels
+	what they need. This property is useful for the userspace fast path
+	case where the linux drivers enables the channels used by userland
+	stack.
+ - ti,loop-back: To loopback Tx streaming I/F to Rx streaming I/F. Used for
+	      infrastructure transfers.
+ - ti,rx-retry-timeout: Number of dma cycles to wait before retry on buffer
+		     starvation.
+
+Example:
+
+	knav_dmas: knav_dmas@0 {
+		compatible = "ti,keystone-navigator-dma";
+		clocks = <&papllclk>, <&clkxge>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,navigator-cloud-address = <0x23a80000 0x23a90000
+					   0x23aa0000 0x23ab0000>;
+
+		dma_gbe: dma_gbe@0 {
+			reg = <0x2004000 0x100>,
+				  <0x2004400 0x120>,
+				  <0x2004800 0x300>,
+				  <0x2004c00 0x120>,
+				  <0x2005000 0x400>;
+			reg-names = "global", "txchan", "rxchan",
+					"txsched", "rxflow";
+		};
+
+		dma_xgbe: dma_xgbe@0 {
+			reg = <0x2fa1000 0x100>,
+				<0x2fa1400 0x200>,
+				<0x2fa1800 0x200>,
+				<0x2fa1c00 0x200>,
+				<0x2fa2000 0x400>;
+			reg-names = "global", "txchan", "rxchan",
+					"txsched", "rxflow";
+		};
+	};
+
+Navigator DMA client:
+Required properties:
+ - ti,navigator-dmas: List of one or more DMA specifiers, each consisting of
+			- A phandle pointing to DMA instance node
+			- A DMA channel number as a phandle arg.
+ - ti,navigator-dma-names: Contains dma channel name for each DMA specifier in
+			the 'ti,navigator-dmas' property.
+
+Example:
+
+	netcp: netcp@2090000 {
+		..
+		ti,navigator-dmas = <&dma_gbe 22>,
+				<&dma_gbe 23>,
+				<&dma_gbe 8>;
+		ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+		..
+	};
diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
new file mode 100644
index 0000000000..b025770eeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
@@ -0,0 +1,238 @@
+* Texas Instruments Keystone Navigator Queue Management SubSystem driver
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+
+Required properties:
+- compatible	: Must be "ti,keystone-navigator-qmss".
+		: Must be "ti,66ak2g-navss-qm" for QMSS on K2G SoC.
+- clocks	: phandle to the reference clock for this device.
+- queue-range	: <start number> total range of queue numbers for the device.
+- linkram0	: <address size> for internal link ram, where size is the total
+		  link ram entries.
+- linkram1	: <address size> for external link ram, where size is the total
+		  external link ram entries. If the address is specified as "0"
+		  driver will allocate memory.
+- qmgrs         : child node describing the individual queue managers on the
+		  SoC. On keystone 1 devices there should be only one node.
+		  On keystone 2 devices there can be more than 1 node.
+  -- managed-queues	: the actual queues managed by each queue manager
+			  instance, specified as <"base queue #" "# of queues">.
+  -- reg		: Address and size of the register set for the device.
+			  Register regions should be specified in the following
+			  order
+			  - Queue Peek region.
+			  - Queue status RAM.
+			  - Queue configuration region.
+			  - Descriptor memory setup region.
+			  - Queue Management/Queue Proxy region for queue Push.
+			  - Queue Management/Queue Proxy region for queue Pop.
+
+For QMSS on K2G SoC, following QM reg indexes are used in that order
+			  - Queue Peek region.
+			  - Queue configuration region.
+			  - Queue Management/Queue Proxy region for queue Push/Pop.
+
+- queue-pools	: child node classifying the queue ranges into pools.
+		  Queue ranges are grouped into 3 type of pools:
+		  - qpend	    : pool of qpend(interruptible) queues
+		  - general-purpose : pool of general queues, primarily used
+				      as free descriptor queues or the
+				      transmit DMA queues.
+		  - accumulator	    : pool of queues on PDSP accumulator channel
+		  Each range can have the following properties:
+  -- qrange		: number of queues to use per queue range, specified as
+			  <"base queue #" "# of queues">.
+  -- interrupts		: Optional property to specify the interrupt mapping
+			  for interruptible queues. The driver additionally sets
+			  the interrupt affinity hint based on the cpu mask.
+  -- qalloc-by-id	: Optional property to specify that the queues in this
+			  range can only be allocated by queue id.
+  -- accumulator	: Accumulator channel specification. Any of the PDSPs in
+			  QMSS can be loaded with the accumulator firmware. The
+			  accumulator firmware’s job is to poll a select number of
+			  queues looking for descriptors that have been pushed
+			  into them. Descriptors are popped from the queue and
+			  placed in a buffer provided by the host. When the list
+			  becomes full or a programmed time period expires, the
+			  accumulator triggers an interrupt to the host to read
+			  the buffer for descriptor information. This firmware
+			  comes in 16, 32, and 48 channel builds. Each of these
+			  channels can be configured to monitor 32 contiguous
+			  queues.  Accumulator channel property is specified as:
+			  <pdsp-id, channel, entries, pacing mode, latency>
+			  pdsp-id     : QMSS PDSP running accumulator firmware
+					on which the channel has to be
+					configured
+			  channel     : Accumulator channel number
+			  entries     : Size of the accumulator descriptor list
+			  pacing mode : Interrupt pacing mode
+					0 : None, i.e interrupt on list full only
+					1 : Time delay since last interrupt
+					2 : Time delay since first new packet
+					3 : Time delay since last new packet
+			  latency     : time to delay the interrupt, specified
+					in microseconds.
+  -- multi-queue	: Optional property to specify that the channel has to
+			  monitor up to 32 queues starting at the base queue #.
+- descriptor-regions	: child node describing the memory regions for keystone
+			  navigator packet DMA descriptors. The memory for
+			  descriptors will be allocated by the driver.
+  -- id				: region number in QMSS.
+  -- region-spec		: specifies the number of descriptors in the
+				  region, specified as
+				  <"# of descriptors" "descriptor size">.
+  -- link-index			: start index, i.e. index of the first
+				  descriptor in the region.
+
+Optional properties:
+- dma-coherent	: Present if DMA operations are coherent.
+- pdsps		: child node describing the PDSP configuration.
+  -- firmware		: firmware to be loaded on the PDSP.
+  -- id			: the qmss pdsp that will run the firmware.
+  -- reg		: Address and size of the register set for the PDSP.
+			  Register regions should be specified in the following
+			  order
+			  - PDSP internal RAM region.
+			  - PDSP control/status region registers.
+			  - QMSS interrupt distributor registers.
+			  - PDSP command interface region.
+
+Example:
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x4000>;
+	linkram0	= <0x100000 0x8000>;
+	linkram1	= <0x0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+		};
+
+		qmgr1 {
+			managed-queues = <0x2000 0x2000>;
+			reg = <0x2a60000 0x20000>,
+			      <0x2a06400 0x400>,
+			      <0x2a04000 0x1000>,
+			      <0x2a05000 0x1000>,
+			      <0x23aa0000 0x20000>,
+			      <0x2aa0000 0x20000>;
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <8704 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <8720 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <640 9>;
+				qalloc-by-id;
+			};
+		};
+		accumulator {
+			acc-0 {
+				qrange = <128 32>;
+				accumulator = <0 36 16 2 50>;
+				interrupts = <0 215 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+			acc-1 {
+				qrange = <160 32>;
+				accumulator = <0 37 16 2 50>;
+				interrupts = <0 216 0xf01>;
+				multi-queue;
+			};
+			acc-2 {
+				qrange = <192 32>;
+				accumulator = <0 38 16 2 50>;
+				interrupts = <0 217 0xf01>;
+				multi-queue;
+			};
+			acc-3 {
+				qrange = <224 32>;
+				accumulator = <0 39 16 2 50>;
+				interrupts = <0 218 0xf01>;
+				multi-queue;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>; /* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@2a10000 {
+			reg = <0x2a10000 0x1000>,
+			      <0x2a0f000 0x100>,
+			      <0x2a0c000 0x3c8>,
+			      <0x2a20000 0x4000>;
+			id = <0>;
+		};
+	};
+}; /* qmss */
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
new file mode 100644
index 0000000000..a750035d62
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-SCI generic power domain
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+allOf:
+  - $ref: /schemas/power/power-domain.yaml#
+
+description: |
+  Some TI SoCs contain a system controller (like the Power Management Micro
+  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+  the state of the various hardware modules present on the SoC. Communication
+  between the host processor running an OS and the system controller happens
+  through a protocol called TI System Control Interface (TI-SCI protocol).
+
+  This PM domain node represents the global PM domain managed by the TI-SCI
+  controller. Since this relies on the TI SCI protocol to communicate with
+  the TI-SCI controller, it must be a child of the TI-SCI controller node.
+
+properties:
+  compatible:
+    const: ti,sci-pm-domain
+
+  "#power-domain-cells":
+    enum: [1, 2]
+    description:
+      The two cells represent values that the TI-SCI controller defines.
+
+      The first cell should contain the device ID.
+
+      The second cell, if cell-value is 2, should be one of the following
+      TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled
+      or
+      TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts.
+      Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions.
+
+      Please see  http://processors.wiki.ti.com/index.php/TISCI for
+      protocol documentation for the values to be used for different devices.
+
+additionalProperties: false
+
+examples:
+  - |
+    k2g_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <1>;
+    };
+
+  - |
+    k3_pds: power-controller {
+        compatible = "ti,sci-pm-domain";
+        #power-domain-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
new file mode 100644
index 0000000000..c402cb2928
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -0,0 +1,521 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/ti,pruss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |+
+  TI Programmable Real-Time Unit and Industrial Communication Subsystem
+
+maintainers:
+  - Suman Anna <s-anna@ti.com>
+
+description: |+
+
+  The Programmable Real-Time Unit and Industrial Communication Subsystem
+  (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
+  Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
+  cores (Programmable Real-Time Units, or PRUs), shared RAM, data and
+  instruction RAMs, some internal peripheral modules to facilitate industrial
+  communication, and an interrupt controller.
+
+  The programmable nature of the PRUs provide flexibility to implement custom
+  peripheral interfaces, fast real-time responses, or specialized data handling.
+  The common peripheral modules include the following,
+    - an Ethernet MII_RT module with two MII ports
+    - an MDIO port to control external Ethernet PHYs
+    - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial
+      Ethernet functions
+    - an Enhanced Capture Module (eCAP)
+    - an Industrial Ethernet Timer with 7/9 capture and 16 compare events
+    - a 16550-compatible UART to support PROFIBUS
+    - Enhanced GPIO with async capture and serial support
+
+  A PRU-ICSS subsystem can have up to three shared data memories. A PRU core
+  acts on a primary Data RAM (there are usually 2 Data RAMs) at its address
+  0x0, but also has access to a secondary Data RAM (primary to the other PRU
+  core) at its address 0x2000. A shared Data RAM, if present, can be accessed
+  by both the PRU cores. The Interrupt Controller (INTC) and a CFG module are
+  common to both the PRU cores. Each PRU core also has a private instruction
+  RAM, and specific register spaces for Control and Debug functionalities.
+
+  Various sub-modules within a PRU-ICSS subsystem are represented as individual
+  nodes and are defined using a parent-child hierarchy depending on their
+  integration within the IP and the SoC. These nodes are described in the
+  following sections.
+
+
+  PRU-ICSS Node
+  ==============
+  Each PRU-ICSS instance is represented as its own node with the individual PRU
+  processor cores, the memories node, an INTC node and an MDIO node represented
+  as child nodes within this PRUSS node. This node shall be a child of the
+  corresponding interconnect bus nodes or target-module nodes.
+
+  See ../../mfd/syscon.yaml for generic SysCon binding details.
+
+
+properties:
+  $nodename:
+    pattern: "^(pruss|icssg)@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,am3356-pruss  # for AM335x SoC family
+      - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0
+      - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1
+      - ti,am5728-pruss  # for AM57xx SoC family
+      - ti,am625-pruss   # for K3 AM62x SoC family
+      - ti,am642-icssg   # for K3 AM64x SoC family
+      - ti,am654-icssg   # for K3 AM65x SoC family
+      - ti,j721e-icssg   # for K3 J721E SoC family
+      - ti,k2g-pruss     # for 66AK2G SoC family
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  dma-coherent: true
+
+  power-domains:
+    description: |
+      This property is as per sci-pm-domain.txt.
+
+patternProperties:
+
+  memories@[a-f0-9]+$:
+    description: |
+      The various Data RAMs within a single PRU-ICSS unit are represented as a
+      single node with the name 'memories'.
+
+    type: object
+
+    properties:
+      reg:
+        minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM.
+        items:
+          - description: Address and size of the Data RAM0.
+          - description: Address and size of the Data RAM1.
+          - description: |
+              Address and size of the Shared Data RAM. Note that on AM437x one
+              of two PRUSS units don't contain Shared RAM, while the second one
+              has it.
+
+      reg-names:
+        minItems: 2
+        items:
+          - const: dram0
+          - const: dram1
+          - const: shrdram2
+
+    required:
+      - reg
+      - reg-names
+
+    additionalProperties: false
+
+  cfg@[a-f0-9]+$:
+    description: |
+      PRU-ICSS configuration space. CFG sub-module represented as a SysCon.
+
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-cfg
+          - const: syscon
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+      reg:
+        maxItems: 1
+
+      ranges:
+        maxItems: 1
+
+      clocks:
+        type: object
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+        patternProperties:
+          coreclk-mux@[a-f0-9]+$:
+            description: |
+              This is applicable only for ICSSG (K3 SoCs). The ICSSG modules
+              core clock can be set to one of the 2 sources: ICSSG_CORE_CLK or
+              ICSSG_ICLK.  This node models this clock mux and should have the
+              name "coreclk-mux".
+
+            type: object
+
+            properties:
+              '#clock-cells':
+                const: 0
+
+              clocks:
+                items:
+                  - description: ICSSG_CORE Clock
+                  - description: ICSSG_ICLK Clock
+
+              assigned-clocks:
+                maxItems: 1
+
+              assigned-clock-parents:
+                maxItems: 1
+                description: |
+                  Standard assigned-clocks-parents definition used for selecting
+                  mux parent (one of the mux input).
+
+              reg:
+                maxItems: 1
+
+            required:
+              - clocks
+
+            additionalProperties: false
+
+          iepclk-mux@[a-f0-9]+$:
+            description: |
+              The IEP module can get its clock from 2 sources: ICSSG_IEP_CLK or
+              CORE_CLK (OCP_CLK in older SoCs). This node models this clock
+              mux and should have the name "iepclk-mux".
+
+            type: object
+
+            properties:
+              '#clock-cells':
+                const: 0
+
+              clocks:
+                items:
+                  - description: ICSSG_IEP Clock
+                  - description: Core Clock (OCP Clock in older SoCs)
+
+              assigned-clocks:
+                maxItems: 1
+
+              assigned-clock-parents:
+                maxItems: 1
+                description: |
+                  Standard assigned-clocks-parents definition used for selecting
+                  mux parent (one of the mux input).
+
+              reg:
+                maxItems: 1
+
+            required:
+              - clocks
+
+            additionalProperties: false
+
+        additionalProperties: false
+
+  iep@[a-f0-9]+$:
+    description: |
+      Industrial Ethernet Peripheral to manage/generate Industrial Ethernet
+      functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x,
+      AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x, J721E & AM64x SoCs).
+      IEP is used for creating PTP clocks and generating PPS signals.
+
+    type: object
+
+  mii-rt@[a-f0-9]+$:
+    description: |
+      Real-Time Ethernet to support multiple industrial communication protocols.
+      MII-RT sub-module represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-mii
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+    additionalProperties: false
+
+  mii-g-rt@[a-f0-9]+$:
+    description: |
+      The Real-time Media Independent Interface to support multiple industrial
+      communication protocols (G stands for Gigabit). MII-G-RT sub-module
+      represented as a SysCon.
+
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - const: ti,pruss-mii-g
+          - const: syscon
+
+      reg:
+        maxItems: 1
+
+    additionalProperties: false
+
+  interrupt-controller@[a-f0-9]+$:
+    description: |
+      PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
+      that is common to all the PRU cores. This should be represented as an
+      interrupt-controller node.
+    $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
+    type: object
+
+  mdio@[a-f0-9]+$:
+    description: |
+      MDIO Node. Each PRUSS has an MDIO module that can be used to control
+      external PHYs. The MDIO module used within the PRU-ICSS is an instance of
+      the MDIO Controller used in TI Davinci SoCs.
+    $ref: /schemas/net/ti,davinci-mdio.yaml#
+    type: object
+
+  "^(pru|rtu|txpru)@[0-9a-f]+$":
+    description: |
+      PRU Node. Each PRUSS has dual PRU cores, each represented as a RemoteProc
+      device through a PRU child node each. Each node can optionally be rendered
+      inactive by using the standard DT string property, "status". The ICSSG IP
+      present on K3 SoCs have additional auxiliary PRU cores with slightly
+      different IP integration.
+    $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
+    type: object
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+# Due to inability of correctly verifying sub-nodes with an @address through
+# the "required" list, the required sub-nodes below are commented out for now.
+
+# required:
+# - memories
+# - interrupt-controller
+# - pru
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,k2g-pruss
+              - ti,am654-icssg
+              - ti,j721e-icssg
+              - ti,am642-icssg
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,k2g-pruss
+    then:
+      required:
+        - dma-coherent
+
+examples:
+  - |
+
+    /* Example 1 AM33xx PRU-ICSS */
+    pruss: pruss@0 {
+        compatible = "ti,am3356-pruss";
+        reg = <0x0 0x80000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss_mem: memories@0 {
+            reg = <0x0 0x2000>,
+                  <0x2000 0x2000>,
+                  <0x10000 0x3000>;
+            reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pruss_cfg: cfg@26000 {
+            compatible = "ti,pruss-cfg", "syscon";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x26000 0x2000>;
+            ranges = <0x00 0x26000 0x2000>;
+
+            clocks {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                pruss_iepclk_mux: iepclk-mux@30 {
+                    reg = <0x30>;
+                    #clock-cells = <0>;
+                    clocks = <&l3_gclk>,        /* icss_iep */
+                             <&pruss_ocp_gclk>; /* icss_ocp */
+                };
+            };
+        };
+
+        pruss_mii_rt: mii-rt@32000 {
+            compatible = "ti,pruss-mii", "syscon";
+            reg = <0x32000 0x58>;
+        };
+
+        pruss_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+        };
+
+        pru0: pru@34000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x34000 0x2000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru0-fw";
+        };
+
+        pru1: pru@38000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x38000 0x2000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru1-fw";
+        };
+
+        pruss_mdio: mdio@32400 {
+            compatible = "ti,davinci_mdio";
+            reg = <0x32400 0x90>;
+            clocks = <&dpll_core_m4_ck>;
+            clock-names = "fck";
+            bus_freq = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+  - |
+
+    /* Example 2 AM43xx PRU-ICSS with PRUSS1 node */
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pruss1: pruss@0 {
+        compatible = "ti,am4376-pruss1";
+        reg = <0x0 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pruss1_mem: memories@0 {
+            reg = <0x0 0x2000>,
+                  <0x2000 0x2000>,
+                  <0x10000 0x8000>;
+            reg-names = "dram0", "dram1", "shrdram2";
+        };
+
+        pruss1_cfg: cfg@26000 {
+            compatible = "ti,pruss-cfg", "syscon";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x26000 0x2000>;
+            ranges = <0x00 0x26000 0x2000>;
+
+            clocks {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                pruss1_iepclk_mux: iepclk-mux@30 {
+                    reg = <0x30>;
+                    #clock-cells = <0>;
+                    clocks = <&sysclk_div>,     /* icss_iep */
+                             <&pruss_ocp_gclk>; /* icss_ocp */
+                };
+            };
+        };
+
+        pruss1_mii_rt: mii-rt@32000 {
+            compatible = "ti,pruss-mii", "syscon";
+            reg = <0x32000 0x58>;
+        };
+
+        pruss1_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4",
+                              "host_intr6", "host_intr7";
+            ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+        };
+
+        pru1_0: pru@34000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x34000 0x3000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_0-fw";
+        };
+
+        pru1_1: pru@38000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x38000 0x3000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_1-fw";
+        };
+
+        pruss1_mdio: mdio@32400 {
+            compatible = "ti,davinci_mdio";
+            reg = <0x32400 0x90>;
+            clocks = <&dpll_core_m4_ck>;
+            clock-names = "fck";
+            bus_freq = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
new file mode 100644
index 0000000000..0df41c4f60
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wakeup M3 IPC device
+
+maintainers:
+  - Dave Gerlach <d-gerlach@ti.com>
+  - Drew Fustini <dfustini@baylibre.com>
+
+description: |+
+  The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+  (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+  that cannot be controlled from the MPU, like suspend/resume and certain deep
+  C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
+  to boot the wkup_m3, it handles communication with the CM3 using IPC registers
+  present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
+  API to allow the SoC PM code to execute specific PM tasks.
+
+  Wkup M3 Device Node
+  ====================
+  A wkup_m3_ipc device node is used to represent the IPC registers within an
+  SoC.
+
+  Support for VTT Toggle with GPIO pin
+  ====================================
+  On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is
+  connected to the enable pin on the DDR VTT regulator. This allows the
+  regulator to be disabled upon suspend and enabled upon resume. Please note
+  that the GPIO pin must be part of the GPIO0 module as only this GPIO module
+  is in the wakeup power domain.
+
+  Support for IO Isolation
+  ========================
+  On AM437x SoCs, certain pins can be forced into an alternate state when IO
+  isolation is activated. Those pins have pad control registers prefixed by
+  'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can
+  override the pin's existing bias (pull-up/pull-down) and value (high/low) when
+  IO isolation is active.
+
+  Support for I2C PMIC Voltage Scaling
+  ====================================
+  It is possible to pass the name of a binary file to load into the CM3 memory.
+  The binary data is the I2C sequences for the CM3 to send out to the PMIC
+  during low power mode entry.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-wkup-m3-ipc # for AM33xx SoCs
+      - ti,am4372-wkup-m3-ipc # for AM43xx SoCs
+
+  reg:
+    description:
+      The IPC register address space to communicate with the Wakeup M3 processor
+    maxItems: 1
+
+  interrupts:
+    description: wkup_m3 interrupt that signals the MPU
+    maxItems: 1
+
+  ti,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the wkup_m3 rproc node so the IPC driver can boot it
+
+  mboxes:
+    description:
+      phandles used by IPC framework to get correct mbox
+      channel for communication. Must point to appropriate
+      mbox_wkupm3 child node.
+    maxItems: 1
+
+  firmware-name:
+    description:
+      Name of binary file with I2C sequences for PMIC voltage scaling
+
+  ti,vtt-gpio-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: GPIO pin connected to enable pin on VTT regulator
+
+  ti,set-io-isolation:
+    type: boolean
+    description:
+      If this property is present, then the wkup_m3_ipc driver will instruct
+      the CM3 firmware to activate IO isolation when suspending to deep sleep.
+      This can be leveraged by a board design to put other devices on the board
+      into a low power state.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: ti,am4372-wkup-m3-ipc
+    then:
+      properties:
+        ti,set-io-isolation: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,rproc
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    /* Example for AM335x SoC */
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        am335x_mailbox: mailbox {
+            #mbox-cells = <1>;
+        };
+
+        wkup_m3_ipc@1324 {
+           compatible = "ti,am3352-wkup-m3-ipc";
+           reg = <0x1324 0x24>;
+           interrupts = <78>;
+           ti,rproc = <&wkup_m3>;
+           mboxes = <&am335x_mailbox &mbox_wkupm3>;
+           ti,vtt-gpio-pin = <7>;
+           firmware-name = "am335x-evm-scale-data.bin";
+        };
+    };
+
+  - |
+    /*
+     * Example for AM473x SoC:
+     * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT
+     * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7
+     * for pull-up during normal system operation. However, the DS0 (deep sleep)
+     * state of the pin is configured for pull-down and thus the VTT regulator
+     * will be disabled to save power when IO isolation is active. Note that
+     * this method is an alternative to using the 'ti,vtt-gpio-pin' property.
+     */
+    #include <dt-bindings/pinctrl/am43xx.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        am437x_mailbox: mailbox {
+            #mbox-cells = <1>;
+        };
+
+        am43xx_pinmux {
+            pinctrl-names = "default";
+            pinctrl-0 = <&ddr3_vtt_toggle_default>;
+
+            ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+                 pinctrl-single,pins = <
+                    0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7)
+                 >;
+            };
+        };
+
+        wkup_m3_ipc@1324 {
+           compatible = "ti,am4372-wkup-m3-ipc";
+           reg = <0x1324 0x24>;
+           interrupts = <78>;
+           ti,rproc = <&wkup_m3>;
+           mboxes = <&am437x_mailbox &mbox_wkupm3>;
+           ti,set-io-isolation;
+           firmware-name = "am43x-evm-scale-data.bin";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
new file mode 100644
index 0000000000..cb245f4002
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/xilinx/xlnx,vcu-settings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx VCU Settings
+
+maintainers:
+  - Michael Tretter <kernel@pengutronix.de>
+
+description: |
+  The Xilinx VCU Settings provides information about the configuration of the
+  video codec unit.
+
+properties:
+  compatible:
+    items:
+      - const: xlnx,vcu-settings
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xlnx_vcu: vcu@a0041000 {
+            compatible = "xlnx,vcu-settings", "syscon";
+            reg = <0x0 0xa0041000 0x0 0x1000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
new file mode 100644
index 0000000000..2417b13ba4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt
@@ -0,0 +1,26 @@
+LogicoreIP designed compatible with Xilinx ZYNQ family.
+-------------------------------------------------------
+
+General concept
+---------------
+
+LogicoreIP design to provide the isolation between processing system
+and programmable logic. Also provides the list of register set to configure
+the frequency.
+
+Required properties:
+- compatible: shall be one of:
+	"xlnx,vcu"
+	"xlnx,vcu-logicoreip-1.0"
+- reg : The base offset and size of the VCU_PL_SLCR register space.
+- clocks: phandle for aclk and pll_ref clocksource
+- clock-names: The identification string, "aclk", is always required for
+   the axi clock. "pll_ref" is required for pll.
+Example:
+
+	xlnx_vcu: vcu@a0040000 {
+		compatible = "xlnx,vcu-logicoreip-1.0";
+		reg = <0x0 0xa0040000 0x0 0x1000>;
+		clocks = <&si570_1>, <&clkc 71>;
+		clock-names = "pll_ref", "aclk";
+	};
diff --git a/Documentation/devicetree/bindings/sound/ac97-bus.txt b/Documentation/devicetree/bindings/sound/ac97-bus.txt
new file mode 100644
index 0000000000..103c428f25
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ac97-bus.txt
@@ -0,0 +1,32 @@
+Generic AC97 Device Properties
+
+This documents describes the devicetree bindings for an ac97 controller child
+node describing ac97 codecs.
+
+Required properties:
+-compatible : Must be "ac97,vendor_id1,vendor_id2
+	      The ids shall be the 4 characters hexadecimal encoding, such as
+	      given by "%04x" formatting of printf
+-reg	    : Must be the ac97 codec number, between 0 and 3
+
+Example:
+ac97: sound@40500000 {
+	compatible = "marvell,pxa270-ac97";
+	reg = < 0x40500000 0x1000 >;
+	interrupts = <14>;
+	reset-gpios = <&gpio 95 GPIO_ACTIVE_HIGH>;
+	#sound-dai-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = < &pinctrl_ac97_default >;
+	clocks = <&clks CLK_AC97>, <&clks CLK_AC97CONF>;
+	clock-names = "AC97CLK", "AC97CONFCLK";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	audio-codec@0 {
+		reg = <0>;
+		compatible = "ac97,574d,4c13";
+		clocks = <&fixed_wm9713_clock>;
+		clock-names = "ac97_clk";
+	}
+};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
new file mode 100644
index 0000000000..ea62e51aba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+
+title: Analog Devices ADAU1372 CODEC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  Analog Devices ADAU1372 four inputs and two outputs codec.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1372.pdf
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1372
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  powerdown-gpios:
+    description: GPIO used for hardware power-down.
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@3c {
+                compatible = "adi,adau1372";
+                reg = <0x3c>;
+                #sound-dai-cells = <0>;
+                clock-names = "mclk";
+                clocks = <&adau1372z_xtal>;
+        };
+    };
+
+    adau1372z_xtal: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <12288000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1701.txt b/Documentation/devicetree/bindings/sound/adi,adau1701.txt
new file mode 100644
index 0000000000..0d1128ce2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1701.txt
@@ -0,0 +1,39 @@
+Analog Devices ADAU1701
+
+Required properties:
+
+ - compatible:		Should contain "adi,adau1701"
+ - reg:			The i2c address. Value depends on the state of ADDR0
+			and ADDR1, as wired in hardware.
+
+Optional properties:
+
+ - reset-gpio: 		A GPIO spec to define which pin is connected to the
+			chip's !RESET pin. If specified, the driver will
+			assert a hardware reset at probe time.
+ - adi,pll-mode-gpios:	An array of two GPIO specs to describe the GPIOs
+			the ADAU's PLL config pins are connected to.
+			The state of the pins are set according to the
+			configured clock divider on ASoC side before the
+			firmware is loaded.
+ - adi,pin-config:	An array of 12 numerical values selecting one of the
+			pin configurations as described in the datasheet,
+			table 53. Note that the value of this property has
+			to be prefixed with '/bits/ 8'.
+ - avdd-supply: 	Power supply for AVDD, providing 3.3V
+ - dvdd-supply: 	Power supply for DVDD, providing 3.3V
+
+Examples:
+
+	i2c_bus {
+		adau1701@34 {
+			compatible = "adi,adau1701";
+			reg = <0x34>;
+			reset-gpio = <&gpio 23 0>;
+			avdd-supply = <&vdd_3v3_reg>;
+			dvdd-supply = <&vdd_3v3_reg>;
+			adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
+			adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
+                                                   0x4 0x4 0x4 0x4 0x4 0x4>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml
new file mode 100644
index 0000000000..8ef1e7f6ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau17x1.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau17x1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781 Codec
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1361
+      - adi,adau1381
+      - adi,adau1461
+      - adi,adau1761
+      - adi,adau1781
+      - adi,adau1961
+
+  reg:
+    maxItems: 1
+    description:
+      The i2c address. Value depends on the state of ADDR0 and ADDR1,
+      as wired in hardware.
+
+  clock-names:
+    const: mclk
+
+  clocks:
+    items:
+      - description: provides the audio master clock for the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      audio-codec@38 {
+        compatible = "adi,adau1761";
+        reg = <0x38>;
+        clock-names = "mclk";
+        clocks = <&audio_clock>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
new file mode 100644
index 0000000000..dba3023a45
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau1977.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU1977/ADAU1978/ADAU1979 Quad ADC with Diagnostics
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+  - Bogdan Togorean <bogdan.togorean@analog.com>
+
+description: |
+  Analog Devices ADAU1977 and similar quad ADC with Diagnostics
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adau1977
+      - adi,adau1978
+      - adi,adau1979
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+  AVDD-supply:
+    description: Analog power support for the device.
+
+  DVDD-supply:
+    description: Supply voltage for digital core.
+
+  adi,micbias:
+    description: |
+      Configures the voltage setting for the MICBIAS pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
+    default: 7
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau1977_spi: adau1977@0 {
+            compatible = "adi,adau1977";
+            reg = <0>;
+            spi-max-frequency = <600000>;
+
+            AVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator_digital>;
+
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+
+            adi,micbias = <3>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau1977_i2c: adau1977@11 {
+            compatible = "adi,adau1977";
+            reg = <0x11>;
+
+            AVDD-supply = <&regulator>;
+            DVDD-supply = <&regulator_digital>;
+
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.yaml b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml
new file mode 100644
index 0000000000..fcca0fde7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau7002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: adi,adau7002
+
+  IOVDD-supply:
+    description:
+      IOVDD power supply, if skipped then it is assumed that the supply pin is
+      hardwired to always on.
+
+  wakeup-delay-ms:
+    description:
+      Delay after power up needed for device to settle.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    audio-codec {
+        compatible = "adi,adau7002";
+        IOVDD-supply = <&pp1800_l15a>;
+        #sound-dai-cells = <0>;
+        wakeup-delay-ms = <80>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
new file mode 100644
index 0000000000..12f60507ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,adau7118.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+
+title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter over I2C or HW
+  standalone mode.
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7118.pdf
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adau7118
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  iovdd-supply:
+    description: Digital Input/Output Power Supply.
+
+  dvdd-supply:
+    description: Internal Core Digital Power Supply.
+
+  adi,decimation-ratio:
+    description: |
+      This property set's the decimation ratio of PDM to PCM audio data.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [64, 32, 16]
+    default: 64
+
+  adi,pdm-clk-map:
+    description: |
+      The ADAU7118 has two PDM clocks for the four Inputs. Each input must be
+      assigned to one of these two clocks. This property set's the mapping
+      between the clocks and the inputs.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      maximum: 1
+    default: [0, 0, 1, 1]
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - iovdd-supply
+  - dvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        /* example with i2c support */
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adau7118_codec: audio-codec@14 {
+                compatible = "adi,adau7118";
+                reg = <0x14>;
+                #sound-dai-cells = <0>;
+                iovdd-supply = <&supply>;
+                dvdd-supply = <&supply>;
+                adi,pdm-clk-map = <1 1 0 0>;
+                adi,decimation-ratio = <16>;
+        };
+    };
+
+    /* example with hw standalone mode */
+    adau7118_codec_hw: adau7118-codec-hw {
+            compatible = "adi,adau7118";
+            #sound-dai-cells = <0>;
+            iovdd-supply = <&supply>;
+            dvdd-supply = <&supply>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
new file mode 100644
index 0000000000..229ad1392c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
@@ -0,0 +1,34 @@
+ADI AXI-I2S controller
+
+The core can be generated with transmit (playback), only receive
+(capture) or both directions enabled.
+
+Required properties:
+ - compatible : Must be "adi,axi-i2s-1.00.a"
+ - reg : Must contain I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+   the core. The core expects two dma channels if both transmit and receive are
+   enabled, one channel otherwise.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	i2s: i2s@77600000 {
+		compatible = "adi,axi-i2s-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>, <&ps7_dma 1>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
new file mode 100644
index 0000000000..7b664e7cb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
@@ -0,0 +1,30 @@
+ADI AXI-SPDIF controller
+
+Required properties:
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
+ - reg : Must contain SPDIF core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+   The controller expects two clocks, the clock used for the AXI interface and
+   the clock used as the sampling rate reference clock sample.
+ - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample
+   rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channel that is used by
+   the core. The core expects one dma channel for transmit.
+ - dma-names : Must be "tx"
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	spdif: spdif@77400000 {
+		compatible = "adi,axi-spdif-tx-1.00.a";
+		reg = <0x77600000 0x1000>;
+		clocks = <&clk 15>, <&audio_clock>;
+		clock-names = "axi", "ref";
+		dmas = <&ps7_dma 0>;
+		dma-names = "tx";
+	};
diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
new file mode 100644
index 0000000000..a844b63f39
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98363.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98363 SoundWire Amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98363 is a SoundWire input Class D mono amplifier that
+  supports MIPI SoundWire v1.2-compatible digital interface for
+  audio and control data.
+  SoundWire peripheral device ID of MAX98363 is 0x3*019f836300
+  where * is the peripheral device unique ID decoded from pin.
+  It supports up to 10 peripheral devices(0x0 to 0x9).
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: sdw3019f836300
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soundwire-controller@3250000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x3250000 0x2000>;
+
+        speaker@0,0 {
+            compatible = "sdw3019f836300";
+            reg = <0 0>;
+            #sound-dai-cells = <0>;
+            sound-name-prefix = "Speaker Left";
+        };
+
+        speaker@0,1 {
+            compatible = "sdw3019f836300";
+            reg = <0 1>;
+            #sound-dai-cells = <0>;
+            sound-name-prefix = "Speaker Right";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,max98388.yaml b/Documentation/devicetree/bindings/sound/adi,max98388.yaml
new file mode 100644
index 0000000000..93ccd59057
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98388.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98388.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98388 Speaker Amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98388 is a mono Class-D speaker amplifier with I/V feedback.
+  The device provides a PCM interface for audio data and a standard
+  I2C interface for control data communication.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,max98388
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  adi,vmon-slot-no:
+    description: slot number of the voltage feedback monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,imon-slot-no:
+    description: slot number of the current feedback monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 1
+
+  adi,interleave-mode:
+    description:
+      For cases where a single combined channel for the I/V feedback data
+      is not sufficient, the device can also be configured to share
+      a single data output channel on alternating frames.
+      In this configuration, the current and voltage data will be frame
+      interleaved on a single output channel.
+    type: boolean
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        max98388: amplifier@39 {
+            compatible = "adi,max98388";
+            reg = <0x39>;
+            #sound-dai-cells = <0>;
+            adi,vmon-slot-no = <0>;
+            adi,imon-slot-no = <1>;
+            adi,interleave-mode;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
new file mode 100644
index 0000000000..bdc10d4204
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98396.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98396 Speaker Amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98396 is a mono Class-DG speaker amplifier with I/V sense.
+  The device provides a PCM interface for audio data and a standard
+  I2C interface for control data communication.
+  The MAX98397 is a variant of MAX98396 with wide input supply range.
+
+properties:
+  compatible:
+    enum:
+      - adi,max98396
+      - adi,max98397
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.2V supply that powers up the DVDD pin.
+
+  dvddio-supply:
+    description: A 1.2V or 1.8V supply that powers up the VDDIO pin.
+
+  pvdd-supply:
+    description: A 3.0V to 20V supply that powers up the PVDD pin.
+
+  vbat-supply:
+    description: A 3.3V to 5.5V supply that powers up the VBAT pin.
+
+  adi,vmon-slot-no:
+    description: slot number of the voltage sense monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,imon-slot-no:
+    description: slot number of the current sense monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 1
+
+  adi,spkfb-slot-no:
+    description: slot number of speaker DSP monitor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 2
+
+  adi,bypass-slot-no:
+    description:
+      Selects the PCM data input channel that is routed to the speaker
+      audio processing bypass path.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,interleave-mode:
+    description:
+      For cases where a single combined channel for the I/V sense data
+      is not sufficient, the device can also be configured to share
+      a single data output channel on alternating frames.
+      In this configuration, the current and voltage data will be frame
+      interleaved on a single output channel.
+    type: boolean
+
+  adi,dmon-stuck-enable:
+    description:
+      Enables the "data monitor stuck" feature. Once the data monitor is
+      enabled, it actively monitors the selected input data (from DIN) to the
+      speaker amplifier. Once a data error is detected, the data monitor
+      automatically places the device into software shutdown.
+    type: boolean
+
+  adi,dmon-stuck-threshold-bits:
+    description:
+      Sets the threshold for the "data monitor stuck" feature, in bits.
+    enum: [9, 11, 13, 15]
+    default: 15
+
+  adi,dmon-magnitude-enable:
+    description:
+      Enables the "data monitor magnitude" feature. Once the data monitor is
+      enabled, it actively monitors the selected input data (from DIN) to the
+      speaker amplifier. Once a data error is detected, the data monitor
+      automatically places the device into software shutdown.
+    type: boolean
+
+  adi,dmon-magnitude-threshold-bits:
+    description:
+      Sets the threshold for the "data monitor magnitude" feature, in bits.
+    enum: [2, 3, 4, 5]
+    default: 5
+
+  adi,dmon-duration-ms:
+    description:
+      Sets the duration for the "data monitor" feature, in milliseconds.
+    enum: [64, 256, 1024, 4096]
+    default: 64
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        max98396: amplifier@39 {
+            compatible = "adi,max98396";
+            reg = <0x39>;
+            dvdd-supply = <&regulator_1v2>;
+            dvddio-supply = <&regulator_1v8>;
+            avdd-supply = <&regulator_1v8>;
+            pvdd-supply = <&regulator_pvdd>;
+            adi,vmon-slot-no = <0>;
+            adi,imon-slot-no = <1>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2305.txt b/Documentation/devicetree/bindings/sound/adi,ssm2305.txt
new file mode 100644
index 0000000000..a9c9d83c8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2305.txt
@@ -0,0 +1,14 @@
+Analog Devices SSM2305 Speaker Amplifier
+========================================
+
+Required properties:
+  - compatible : "adi,ssm2305"
+  - shutdown-gpios : The gpio connected to the shutdown pin.
+                     The gpio signal is ACTIVE_LOW.
+
+Example:
+
+ssm2305: analog-amplifier {
+	compatible = "adi,ssm2305";
+	shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
new file mode 100644
index 0000000000..f3f3254077
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2518.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,ssm2518.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SSM2518 audio amplifier
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: adi,ssm2518
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device. This will either be 0x34 (ADDR pin low)
+       or 0x35 (ADDR pin high)
+
+  gpios:
+    maxItems: 1
+    description: |
+       GPIO connected to the nSD pin. If the property is not present
+       it is assumed that the nSD pin is hardwired to always on.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   i2c {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec@34 {
+       compatible = "adi,ssm2518";
+       reg = <0x34>;
+       gpios = <&gpio 5 0>;
+     };
+   };
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt
new file mode 100644
index 0000000000..3b3302fe39
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt
@@ -0,0 +1,19 @@
+Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices
+
+SSM2602 support both I2C and SPI as the configuration interface,
+the selection is made by the MODE strap-in pin.
+SSM2603 and SSM2604 only support I2C as the configuration interface.
+
+Required properties:
+
+  - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+ Example:
+
+	ssm2602: ssm2602@1a {
+		compatible = "adi,ssm2602";
+		reg = <0x1a>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
new file mode 100644
index 0000000000..144450df58
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices SSM3515 Audio Amplifier
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  SSM3515 is a mono Class-D audio amplifier with digital input.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ssm3515
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec@14 {
+        compatible = "adi,ssm3515";
+        reg = <0x14>;
+        #sound-dai-cells = <0>;
+        sound-name-prefix = "Left Tweeter";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt
new file mode 100644
index 0000000000..ae5f7f057d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4104.txt
@@ -0,0 +1,25 @@
+AK4104 S/PDIF transmitter
+
+This device supports SPI mode only.
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4104"
+
+  - reg : The chip select number on the SPI bus
+
+  - vdd-supply : A regulator node, providing 2.7V - 3.6V
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		  deasserted before communication to the device starts.
+
+Example:
+
+spdif: ak4104@0 {
+	compatible = "asahi-kasei,ak4104";
+	reg = <0>;
+	spi-max-frequency = <5000000>;
+	vdd-supply = <&vdd_3v3_reg>;
+};
diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt
new file mode 100644
index 0000000000..6e11a2f740
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4118.txt
@@ -0,0 +1,22 @@
+AK4118 S/PDIF transceiver
+
+This device supports I2C mode.
+
+Required properties:
+
+- compatible : "asahi-kasei,ak4118"
+- reg : The I2C address of the device for I2C
+- reset-gpios: A GPIO specifier for the reset pin
+- irq-gpios: A GPIO specifier for the IRQ pin
+
+Example:
+
+&i2c {
+	ak4118: ak4118@13 {
+		#sound-dai-cells = <0>;
+		compatible = "asahi-kasei,ak4118";
+		reg = <0x13>;
+		reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
+		irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/ak4375.yaml
new file mode 100644
index 0000000000..587598e122
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4375.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4375 DAC and headphones amplifier
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4375
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  avdd-supply:
+    description: regulator phandle for the AVDD power supply.
+
+  tvdd-supply:
+    description: regulator phandle for the TVDD power supply.
+
+  pdn-gpios:
+    description: optional GPIO to set the PDN pin.
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+  - avdd-supply
+  - tvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      headphones: audio-codec@10 {
+        compatible = "asahi-kasei,ak4375";
+        reg = <0x10>;
+        avdd-supply = <&reg_headphones_avdd>;
+        tvdd-supply = <&pm8916_l6>;
+        pdn-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&headphones_pdn_default>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4554.txt b/Documentation/devicetree/bindings/sound/ak4554.txt
new file mode 100644
index 0000000000..934fa02754
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4554.txt
@@ -0,0 +1,11 @@
+AK4554 ADC/DAC
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak4554"
+
+Example:
+
+ak4554-adc-dac {
+	compatible = "asahi-kasei,ak4554";
+};
diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/ak4613.yaml
new file mode 100644
index 0000000000..75e13414d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4613.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4613.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4613 I2C transmitter
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4613
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: audio-graph-port.yaml#/definitions/ports
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+patternProperties:
+  "^asahi-kasei,in[1-2]-single-end$":
+    description: Input Pin 1 - 2.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  "^asahi-kasei,out[1-6]-single-end$":
+    description: Output Pin 1 - 6.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak4613: codec@10 {
+            compatible = "asahi-kasei,ak4613";
+            reg = <0x10>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml
new file mode 100644
index 0000000000..437fe5d7ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4642.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4642.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4642 I2C transmitter
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - asahi-kasei,ak4642
+      - asahi-kasei,ak4643
+      - asahi-kasei,ak4648
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: common clock binding; frequency of MCKO
+
+  clock-output-names:
+    description: common clock name
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak4643: codec@12 {
+            compatible = "asahi-kasei,ak4643";
+            #sound-dai-cells = <0>;
+            reg = <0x12>;
+            #clock-cells = <0>;
+            clocks = <&audio_clock>;
+            clock-frequency = <12288000>;
+            clock-output-names = "ak4643_mcko";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak5386.txt b/Documentation/devicetree/bindings/sound/ak5386.txt
new file mode 100644
index 0000000000..ec3df3abba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak5386.txt
@@ -0,0 +1,23 @@
+AK5386 Single-ended 24-Bit 192kHz delta-sigma ADC
+
+This device has no control interface.
+
+Required properties:
+
+  - compatible : "asahi-kasei,ak5386"
+
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset/power down pin.
+		 If specified, it will be deasserted at probe time.
+  - va-supply : a regulator spec, providing 5.0V
+  - vd-supply : a regulator spec, providing 3.3V
+
+Example:
+
+spdif: ak5386@0 {
+	compatible = "asahi-kasei,ak5386";
+	reset-gpio = <&gpio0 23>;
+	va-supply = <&vdd_5v0_reg>;
+	vd-supply = <&vdd_3v3_reg>;
+};
diff --git a/Documentation/devicetree/bindings/sound/alc5623.txt b/Documentation/devicetree/bindings/sound/alc5623.txt
new file mode 100644
index 0000000000..26c86c98d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/alc5623.txt
@@ -0,0 +1,25 @@
+ALC5621/ALC5622/ALC5623 audio Codec
+
+Required properties:
+
+ - compatible:	"realtek,alc5623"
+ - reg:		the I2C address of the device.
+
+Optional properties:
+
+ - add-ctrl:	  Default register value for Reg-40h, Additional Control
+		  Register. If absent or has the value of 0, the
+		  register is untouched.
+
+ - jack-det-ctrl: Default register value for Reg-5Ah, Jack Detect
+		  Control Register. If absent or has value 0, the
+		  register is untouched.
+
+Example:
+
+	alc5621: alc5621@1a {
+		compatible = "alc5621";
+		reg = <0x1a>;
+		add-ctrl = <0x3700>;
+		jack-det-ctrl = <0x4810>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
new file mode 100644
index 0000000000..78273647f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Codec
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-codec
+      - allwinner,sun6i-a31-codec
+      - allwinner,sun7i-a20-codec
+      - allwinner,sun8i-a23-codec
+      - allwinner,sun8i-h3-codec
+      - allwinner,sun8i-v3s-codec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: codec
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  allwinner,audio-routing:
+    description: |-
+      A list of the connections between audio components.  Each entry
+      is a pair of strings, the first being the connection's sink, the
+      second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    maxItems: 18
+    items:
+      enum:
+        # Audio Pins on the SoC
+        - HP
+        - HPCOM
+        - LINEIN
+        - LINEOUT
+        - MIC1
+        - MIC2
+        - MIC3
+
+        # Microphone Biases from the SoC
+        - HBIAS
+        - MBIAS
+
+        # Board Connectors
+        - Headphone
+        - Headset Mic
+        - Line In
+        - Line Out
+        - Mic
+        - Speaker
+
+  allwinner,codec-analog-controls:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the codec analog controls in the PRCM
+
+  allwinner,pa-gpios:
+    maxItems: 1
+    description: GPIO to enable the external amplifier
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-codec
+            - allwinner,sun8i-a23-codec
+            - allwinner,sun8i-h3-codec
+            - allwinner,sun8i-v3s-codec
+
+    then:
+      if:
+        properties:
+          compatible:
+            const: allwinner,sun6i-a31-codec
+
+      then:
+        required:
+          - resets
+          - allwinner,audio-routing
+
+      else:
+        required:
+          - resets
+          - allwinner,audio-routing
+          - allwinner,codec-analog-controls
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun6i-a31-codec
+
+    then:
+      properties:
+        allwinner,audio-routing:
+          items:
+            enum:
+              - HP
+              - HPCOM
+              - LINEIN
+              - LINEOUT
+              - MIC1
+              - MIC2
+              - MIC3
+              - HBIAS
+              - MBIAS
+              - Headphone
+              - Headset Mic
+              - Line In
+              - Line Out
+              - Mic
+              - Speaker
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-a23-codec
+
+    then:
+      properties:
+        allwinner,audio-routing:
+          items:
+            enum:
+              - HP
+              - HPCOM
+              - LINEIN
+              - MIC1
+              - MIC2
+              - HBIAS
+              - MBIAS
+              - Headphone
+              - Headset Mic
+              - Line In
+              - Line Out
+              - Mic
+              - Speaker
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-h3-codec
+
+    then:
+      properties:
+        allwinner,audio-routing:
+          items:
+            enum:
+              - HP
+              - HPCOM
+              - LINEIN
+              - LINEOUT
+              - MIC1
+              - MIC2
+              - HBIAS
+              - MBIAS
+              - Headphone
+              - Headset Mic
+              - Line In
+              - Line Out
+              - Mic
+              - Speaker
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-v3s-codec
+
+    then:
+      properties:
+        allwinner,audio-routing:
+          items:
+            enum:
+              - HP
+              - HPCOM
+              - MIC1
+              - HBIAS
+              - Headphone
+              - Headset Mic
+              - Line In
+              - Line Out
+              - Mic
+              - Speaker
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    codec@1c22c00 {
+        #sound-dai-cells = <0>;
+        compatible = "allwinner,sun7i-a20-codec";
+        reg = <0x01c22c00 0x40>;
+        interrupts = <0 30 4>;
+        clocks = <&apb0_gates 0>, <&codec_clk>;
+        clock-names = "apb", "codec";
+        dmas = <&dma 0 19>, <&dma 0 19>;
+        dma-names = "rx", "tx";
+    };
+
+  - |
+    codec@1c22c00 {
+        #sound-dai-cells = <0>;
+        compatible = "allwinner,sun6i-a31-codec";
+        reg = <0x01c22c00 0x98>;
+        interrupts = <0 29 4>;
+        clocks = <&ccu 61>, <&ccu 135>;
+        clock-names = "apb", "codec";
+        resets = <&ccu 42>;
+        dmas = <&dma 15>, <&dma 15>;
+        dma-names = "rx", "tx";
+        allwinner,audio-routing =
+            "Headphone", "HP",
+            "Speaker", "LINEOUT",
+            "LINEIN", "Line In",
+            "MIC1", "MBIAS",
+            "MIC1", "Mic",
+            "MIC2", "HBIAS",
+            "MIC2", "Headset Mic";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
new file mode 100644
index 0000000000..739114fb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 I2S Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-i2s
+      - const: allwinner,sun6i-a31-i2s
+      - const: allwinner,sun8i-a83t-i2s
+      - const: allwinner,sun8i-h3-i2s
+      - items:
+          - const: allwinner,sun8i-r40-i2s
+          - const: allwinner,sun8i-h3-i2s
+      - items:
+          - const: allwinner,sun8i-v3-i2s
+          - const: allwinner,sun8i-h3-i2s
+      - const: allwinner,sun50i-a64-codec-i2s
+      - items:
+          - const: allwinner,sun50i-a64-i2s
+          - const: allwinner,sun8i-h3-i2s
+      - const: allwinner,sun50i-h6-i2s
+      - const: allwinner,sun50i-r329-i2s
+      - items:
+          - const: allwinner,sun20i-d1-i2s
+          - const: allwinner,sun50i-r329-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: mod
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  dmas: true
+  dma-names: true
+  resets:
+    maxItems: 1
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-i2s
+              - allwinner,sun8i-a83t-i2s
+              - allwinner,sun8i-h3-i2s
+              - allwinner,sun50i-a64-codec-i2s
+              - allwinner,sun50i-h6-i2s
+              - allwinner,sun50i-r329-i2s
+
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a83t-i2s
+              - allwinner,sun8i-h3-i2s
+
+    then:
+      properties:
+        dmas:
+          minItems: 1
+          items:
+            - description: RX DMA Channel
+            - description: TX DMA Channel
+          description:
+            Some controllers cannot receive but can only transmit
+            data. In such a case, the RX DMA channel is to be omitted.
+
+        dma-names:
+          oneOf:
+            - items:
+                - const: rx
+                - const: tx
+            - const: tx
+          description:
+            Some controllers cannot receive but can only transmit
+            data. In such a case, the RX name is to be omitted.
+
+    else:
+      properties:
+        dmas:
+          items:
+            - description: RX DMA Channel
+            - description: TX DMA Channel
+
+        dma-names:
+          items:
+            - const: rx
+            - const: tx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2s0: i2s@1c22400 {
+        #sound-dai-cells = <0>;
+        compatible = "allwinner,sun4i-a10-i2s";
+        reg = <0x01c22400 0x400>;
+        interrupts = <0 16 4>;
+        clocks = <&apb0_gates 3>, <&i2s0_clk>;
+        clock-names = "apb", "mod";
+        dmas = <&dma 0 3>, <&dma 0 3>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
new file mode 100644
index 0000000000..8108c564dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 S/PDIF Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Liam Girdwood <lgirdwood@gmail.com>
+  - Mark Brown <broonie@kernel.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-spdif
+      - const: allwinner,sun6i-a31-spdif
+      - const: allwinner,sun8i-h3-spdif
+      - const: allwinner,sun50i-h6-spdif
+      - items:
+          - const: allwinner,sun8i-a83t-spdif
+          - const: allwinner,sun8i-h3-spdif
+      - items:
+          - const: allwinner,sun50i-a64-spdif
+          - const: allwinner,sun8i-h3-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: spdif
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  dmas: true
+  dma-names: true
+  resets:
+    maxItems: 1
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-spdif
+              - allwinner,sun8i-h3-spdif
+
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-h3-spdif
+              - allwinner,sun50i-h6-spdif
+
+    then:
+      properties:
+        dmas:
+          description: TX DMA Channel
+
+        dma-names:
+          const: tx
+
+    else:
+      properties:
+        dmas:
+          items:
+            - description: RX DMA Channel
+            - description: TX DMA Channel
+
+        dma-names:
+          items:
+            - const: rx
+            - const: tx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spdif: spdif@1c21000 {
+        #sound-dai-cells = <0>;
+        compatible = "allwinner,sun4i-a10-spdif";
+        reg = <0x01c21000 0x40>;
+        interrupts = <13>;
+        clocks = <&apb0_gates 1>, <&spdif_clk>;
+        clock-names = "apb", "spdif";
+        dmas = <&dma 0 2>, <&dma 0 2>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
new file mode 100644
index 0000000000..5800de63fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun50i-a64-codec-analog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 Analog Codec
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun50i-a64-codec-analog
+
+  reg:
+    maxItems: 1
+
+  cpvdd-supply:
+    description:
+      Regulator for the headphone amplifier
+
+  allwinner,internal-bias-resistor:
+    description:
+      Enable the internal 2.2K bias resistor between HBIAS and MICDET pins
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - cpvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    codec_analog: codec-analog@1f015c0 {
+      compatible = "allwinner,sun50i-a64-codec-analog";
+      reg = <0x01f015c0 0x4>;
+      cpvdd-supply = <&reg_eldo1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
new file mode 100644
index 0000000000..763b876047
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 DMIC
+
+maintainers:
+  - Ban Tao <fengzheng923@gmail.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-dmic
+          - const: allwinner,sun50i-h6-dmic
+      - const: allwinner,sun50i-h6-dmic
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    dmic: dmic@5095000 {
+      #sound-dai-cells = <0>;
+      compatible = "allwinner,sun50i-h6-dmic";
+      reg = <0x05095000 0x400>;
+      interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>;
+      clock-names = "bus", "mod";
+      dmas = <&dma 7>;
+      dma-names = "rx";
+      resets = <&ccu RST_BUS_DMIC>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
new file mode 100644
index 0000000000..1c21a1b390
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun8i-a23-codec-analog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 Analog Codec
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      # FIXME: This is documented in the PRCM binding, but needs to be
+      # migrated here at some point
+      # - allwinner,sun8i-a23-codec-analog
+      - const: allwinner,sun8i-h3-codec-analog
+      - items:
+          - const: allwinner,sun8i-v3-codec-analog
+          - const: allwinner,sun8i-h3-codec-analog
+      - const: allwinner,sun8i-v3s-codec-analog
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    codec_analog: codec-analog@1f015c0 {
+      compatible = "allwinner,sun8i-h3-codec-analog";
+      reg = <0x01f015c0 0x4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
new file mode 100644
index 0000000000..63eadc4200
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun8i-a33-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A33 Codec
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  "#sound-dai-cells":
+    minimum: 0
+    maximum: 1
+    description:
+      A value of 0 is deprecated. When used, it only allows access to
+      the ADC/DAC and AIF1 (the CPU DAI), not the other two AIFs/DAIs.
+
+  compatible:
+    oneOf:
+      - items:
+          - const: allwinner,sun50i-a64-codec
+          - const: allwinner,sun8i-a33-codec
+      - const: allwinner,sun8i-a33-codec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    audio-codec@1c22e00 {
+      #sound-dai-cells = <1>;
+      compatible = "allwinner,sun8i-a33-codec";
+      reg = <0x01c22e00 0x400>;
+      interrupts = <0 29 4>;
+      clocks = <&ccu 47>, <&ccu 92>;
+      clock-names = "bus", "mod";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
new file mode 100644
index 0000000000..6350dfc0a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,aiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AIU audio output controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 2
+
+  compatible:
+    items:
+      - enum:
+          - amlogic,aiu-gxbb
+          - amlogic,aiu-gxl
+          - amlogic,aiu-meson8
+          - amlogic,aiu-meson8b
+      - const: amlogic,aiu
+
+  clocks:
+    items:
+      - description: AIU peripheral clock
+      - description: I2S peripheral clock
+      - description: I2S output clock
+      - description: I2S master clock
+      - description: I2S mixer clock
+      - description: SPDIF peripheral clock
+      - description: SPDIF output clock
+      - description: SPDIF master clock
+      - description: SPDIF master clock multiplexer
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2s_pclk
+      - const: i2s_aoclk
+      - const: i2s_mclk
+      - const: i2s_mixer
+      - const: spdif_pclk
+      - const: spdif_aoclk
+      - const: spdif_mclk
+      - const: spdif_mclk_sel
+
+  interrupts:
+    items:
+      - description: I2S interrupt line
+      - description: SPDIF interrupt line
+
+  interrupt-names:
+    items:
+      - const: i2s
+      - const: spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+    aiu: audio-controller@5400 {
+        compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+        #sound-dai-cells = <2>;
+        reg = <0x5400 0x2ac>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "i2s", "spdif";
+        clocks = <&clkc CLKID_AIU_GLUE>,
+                 <&clkc CLKID_I2S_OUT>,
+                 <&clkc CLKID_AOCLK_GATE>,
+                 <&clkc CLKID_CTS_AMCLK>,
+                 <&clkc CLKID_MIXER_IFACE>,
+                 <&clkc CLKID_IEC958>,
+                 <&clkc CLKID_IEC958_GATE>,
+                 <&clkc CLKID_CTS_MCLK_I958>,
+                 <&clkc CLKID_CTS_I958>;
+        clock-names = "pclk",
+                      "i2s_pclk",
+                      "i2s_aoclk",
+                      "i2s_mclk",
+                      "i2s_mixer",
+                      "spdif_pclk",
+                      "spdif_aoclk",
+                      "spdif_mclk",
+                      "spdif_mclk_sel";
+        resets = <&reset RESET_AIU>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
new file mode 100644
index 0000000000..b1b48d6831
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-fifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG Audio FIFO controllers
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,axg-toddr
+          - amlogic,axg-frddr
+      - items:
+          - enum:
+              - amlogic,g12a-toddr
+              - amlogic,sm1-toddr
+          - const: amlogic,axg-toddr
+      - items:
+          - enum:
+              - amlogic,g12a-frddr
+              - amlogic,sm1-frddr
+          - const: amlogic,axg-frddr
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+
+  amlogic,fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Size of the controller's fifo in bytes
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clocks
+  - interrupts
+  - resets
+  - amlogic,fifo-depth
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-toddr
+              - amlogic,sm1-toddr
+              - amlogic,g12a-frddr
+              - amlogic,sm1-frddr
+
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          items:
+            - const: arb
+            - const: rst
+      required:
+        - reset-names
+
+    else:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          const: arb
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    audio-controller@1c0 {
+        compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr";
+        reg = <0x1c0 0x1c>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+        interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+        resets = <&arb>, <&clkc_audio AUD_RESET_FRDDR_A>;
+        reset-names = "arb", "rst";
+        amlogic,fifo-depth = <512>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
new file mode 100644
index 0000000000..df21dd72fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG PDM input
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,g12a-pdm
+              - amlogic,sm1-pdm
+          - const: amlogic,axg-pdm
+      - const: amlogic,axg-pdm
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: PDM digital clock
+      - description: DSP system clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: dclk
+      - const: sysclk
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: dai-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-pdm
+              - amlogic,sm1-pdm
+    then:
+      required:
+        - resets
+
+    else:
+      properties:
+        resets: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+
+    audio-controller@ff632000 {
+        compatible = "amlogic,axg-pdm";
+        reg = <0xff632000 0x34>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc_audio AUD_CLKID_PDM>,
+                 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+                 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+        clock-names = "pclk", "dclk", "sysclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
new file mode 100644
index 0000000000..5db718e4d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AXG sound card
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    const: amlogic,axg-sound-card
+
+  audio-aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: list of auxiliary devices
+
+  audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list off component DAPM widget. Each entry is a pair of strings,
+      the first being the widget type, the second being the widget name
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Container for dai-link level properties and the CODEC sub-nodes.
+      There should be at least one (and probably more) subnode of this type
+
+    properties:
+      dai-format:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ i2s, left-j, dsp_a ]
+
+      dai-tdm-slot-num:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Number of slots in use. If omitted, slot number is set to
+          accommodate the largest mask provided.
+        maximum: 32
+
+      dai-tdm-slot-width:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Width in bits for each slot
+        enum: [ 8, 16, 20, 24, 32 ]
+        default: 32
+
+      mclk-fs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Multiplication factor between the frame rate and master clock
+          rate
+
+      sound-dai:
+        maxItems: 1
+        description: phandle of the CPU DAI
+
+    patternProperties:
+      "^dai-tdm-slot-(t|r)x-mask-[0-3]$":
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          Transmit and receive cpu slot masks of each TDM lane
+          When omitted, mask is assumed to have to no slots. A valid
+          interface must have at least one slot, so at least one these
+          mask should be provided with an enabled slot.
+
+      "^codec(-[0-9]+)?$":
+        type: object
+        additionalProperties: false
+        description:
+          dai-link representing backend links should have at least one subnode.
+          One subnode for each codec of the dai-link. dai-link representing
+          frontend links have no codec, therefore have no subnodes
+
+        properties:
+          sound-dai:
+            maxItems: 1
+            description: phandle of the codec DAI
+
+        patternProperties:
+          "^dai-tdm-slot-(t|r)x-mask$":
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 32
+            description: Transmit and receive codec slot masks
+
+        required:
+          - sound-dai
+
+    required:
+      - sound-dai
+
+required:
+  - dai-link-0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "amlogic,axg-sound-card";
+        model = "AXG-S420";
+        audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
+        audio-widgets = "Line", "Lineout",
+                        "Line", "Linein",
+                        "Speaker", "Speaker1 Left",
+                        "Speaker", "Speaker1 Right",
+                        "Speaker", "Speaker2 Left",
+                        "Speaker", "Speaker2 Right";
+        audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+                        "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+                        "TDM_C Playback", "TDMOUT_C OUT",
+                        "TDMIN_A IN 2", "TDM_C Capture",
+                        "TDMIN_A IN 5", "TDM_C Loopback",
+                        "TODDR_A IN 0", "TDMIN_A OUT",
+                        "Lineout", "Lineout AOUTL",
+                        "Lineout", "Lineout AOUTR",
+                        "Speaker1 Left", "SPK1 OUT_A",
+                        "Speaker2 Left", "SPK2 OUT_A",
+                        "Speaker1 Right", "SPK1 OUT_B",
+                        "Speaker2 Right", "SPK2 OUT_B",
+                        "Linein AINL", "Linein",
+                        "Linein AINR", "Linein";
+
+        dai-link-0 {
+            sound-dai = <&frddr_a>;
+        };
+
+        dai-link-1 {
+            sound-dai = <&toddr_a>;
+        };
+
+        dai-link-2 {
+            sound-dai = <&tdmif_c>;
+            dai-format = "i2s";
+            dai-tdm-slot-tx-mask-2 = <1 1>;
+            dai-tdm-slot-tx-mask-3 = <1 1>;
+            dai-tdm-slot-rx-mask-1 = <1 1>;
+            mclk-fs = <256>;
+
+            codec-0 {
+                sound-dai = <&lineout>;
+            };
+
+            codec-1 {
+                sound-dai = <&speaker_amp1>;
+            };
+
+            codec-2 {
+                sound-dai = <&speaker_amp2>;
+            };
+
+            codec-3 {
+                sound-dai = <&linein>;
+            };
+        };
+
+        dai-link-3 {
+            sound-dai = <&spdifout>;
+
+            codec {
+                sound-dai = <&spdif_dit>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
new file mode 100644
index 0000000000..a0bd7a5fb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Input
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,axg-spdifin
+      - items:
+          - enum:
+              - amlogic,g12a-spdifin
+              - amlogic,sm1-spdifin
+          - const: amlogic,axg-spdifin
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: SPDIF input reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: refclk
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: dai-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-spdifin
+              - amlogic,sm1-spdifin
+    then:
+      required:
+        - resets
+
+    else:
+      properties:
+        resets: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    audio-controller@400 {
+        compatible = "amlogic,axg-spdifin";
+        reg = <0x400 0x30>;
+        #sound-dai-cells = <0>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+                 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+        clock-names = "pclk", "refclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
new file mode 100644
index 0000000000..15be8dae93
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-spdifout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG SPDIF Output
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,axg-spdifout
+      - items:
+          - enum:
+              - amlogic,g12a-spdifout
+              - amlogic,sm1-spdifout
+          - const: amlogic,axg-spdifout
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: SPDIF output master clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: mclk
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: dai-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-spdifout
+              - amlogic,sm1-spdifout
+    then:
+      required:
+        - resets
+
+    else:
+      properties:
+        resets: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+
+    audio-controller@480 {
+        compatible = "amlogic,axg-spdifout";
+        reg = <0x480 0x50>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+                 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+        clock-names = "pclk", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
new file mode 100644
index 0000000000..719ca8fc98
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-formatters.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio AXG TDM formatters
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,g12a-tdmout
+      - amlogic,sm1-tdmout
+      - amlogic,axg-tdmout
+      - amlogic,g12a-tdmin
+      - amlogic,sm1-tdmin
+      - amlogic,axg-tdmin
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: Bit clock
+      - description: Bit clock input multiplexer
+      - description: Sample clock
+      - description: Sample clock input multiplexer
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sclk
+      - const: sclk_sel
+      - const: lrclk
+      - const: lrclk_sel
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: component-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-tdmin
+              - amlogic,sm1-tdmin
+              - amlogic,g12a-tdmout
+              - amlogic,sm1-tdmout
+    then:
+      required:
+        - resets
+
+    else:
+      properties:
+        resets: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    audio-controller@500 {
+        compatible = "amlogic,g12a-tdmout";
+        reg = <0x500 0x40>;
+        resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+        clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+                 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+                 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+                 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+                 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+        clock-names = "pclk", "sclk", "sclk_sel",
+                      "lrclk", "lrclk_sel";
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
new file mode 100644
index 0000000000..45955d8a26
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,axg-tdm-iface.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Audio TDM Interfaces
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: amlogic,axg-tdm-iface
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Bit clock
+      - description: Sample clock
+      - description: Master clock # optional
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sclk
+      - const: lrclk
+      - const: mclk
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+
+    audio-controller {
+        compatible = "amlogic,axg-tdm-iface";
+        #sound-dai-cells = <0>;
+        clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+                 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+                 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+        clock-names = "sclk", "lrclk", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
new file mode 100644
index 0000000000..23f82bb897
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,g12a-toacodec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12a Internal DAC Control Glue
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - items:
+          - const: amlogic,g12a-toacodec
+      - items:
+          - enum:
+              - amlogic,sm1-toacodec
+          - const: amlogic,g12a-toacodec
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    toacodec: audio-controller@740 {
+        compatible = "amlogic,g12a-toacodec";
+        reg = <0x740 0x4>;
+        #sound-dai-cells = <1>;
+        resets = <&clkc_audio AUD_RESET_TOACODEC>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
new file mode 100644
index 0000000000..4e8cd7eb7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-tohdmitx.txt
@@ -0,0 +1,58 @@
+* Amlogic HDMI Tx control glue
+
+Required properties:
+- compatible: "amlogic,g12a-tohdmitx" or
+	      "amlogic,sm1-tohdmitx"
+- reg: physical base address of the controller and length of memory
+       mapped region.
+- #sound-dai-cells: should be 1.
+- resets: phandle to the dedicated reset line of the hdmitx glue.
+
+Example on the S905X2 SoC:
+
+tohdmitx: audio-controller@744 {
+	compatible = "amlogic,g12a-tohdmitx";
+	reg = <0x0 0x744 0x0 0x4>;
+	#sound-dai-cells = <1>;
+	resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+};
+
+Example of an 'amlogic,axg-sound-card':
+
+sound {
+	compatible = "amlogic,axg-sound-card";
+
+[...]
+
+	dai-link-x {
+		sound-dai = <&tdmif_a>;
+		dai-format = "i2s";
+		dai-tdm-slot-tx-mask-0 = <1 1>;
+
+		codec-0 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+		};
+
+		codec-1 {
+			sound-dai = <&external_dac>;
+		};
+	};
+
+	dai-link-y {
+		sound-dai = <&tdmif_c>;
+		dai-format = "i2s";
+		dai-tdm-slot-tx-mask-0 = <1 1>;
+
+		codec {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+		};
+	};
+
+	dai-link-z {
+		sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+		codec {
+			sound-dai = <&hdmi_tx>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
new file mode 100644
index 0000000000..d4277d342e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GX sound card
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,gx-sound-card
+
+  audio-aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: list of auxiliary devices
+
+  audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list off component DAPM widget. Each entry is a pair of strings,
+      the first being the widget type, the second being the widget name
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    additionalProperties: false
+    description: |-
+      dai-link child nodes:
+        Container for dai-link level properties and the CODEC sub-nodes.
+        There should be at least one (and probably more) subnode of this type
+
+    properties:
+      dai-format:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ i2s, left-j, dsp_a ]
+
+      mclk-fs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |-
+          Multiplication factor between the frame rate and master clock
+          rate
+
+      sound-dai:
+        maxItems: 1
+        description: phandle of the CPU DAI
+
+    patternProperties:
+      "^codec(-[0-9]+)?$":
+        type: object
+        additionalProperties: false
+        description: |-
+          Codecs:
+          dai-link representing backend links should have at least one subnode.
+          One subnode for each codec of the dai-link. dai-link representing
+          frontend links have no codec, therefore have no subnodes
+
+        properties:
+          sound-dai:
+            maxItems: 1
+            description: phandle of the codec DAI
+
+        required:
+          - sound-dai
+
+    required:
+      - sound-dai
+
+required:
+  - model
+  - dai-link-0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "amlogic,gx-sound-card";
+        model = "GXL-ACME-S905X-FOO";
+        audio-aux-devs = <&amp>;
+        audio-routing = "I2S ENCODER I2S IN", "I2S FIFO Playback";
+
+        dai-link-0 {
+               sound-dai = <&i2s_fifo>;
+        };
+
+        dai-link-1 {
+                sound-dai = <&i2s_encoder>;
+                dai-format = "i2s";
+                mclk-fs = <256>;
+
+                codec-0 {
+                        sound-dai = <&codec0>;
+                };
+
+                codec-1 {
+                        sound-dai = <&codec1>;
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
new file mode 100644
index 0000000000..5f5cccdbeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,t9015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic T9015 Internal Audio DAC
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    items:
+      - const: amlogic,t9015
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - AVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/g12a-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+
+    acodec: audio-controller@32000 {
+        compatible = "amlogic,t9015";
+        reg = <0x32000 0x14>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc CLKID_AUDIO_CODEC>;
+        clock-names = "pclk";
+        resets = <&reset RESET_AUDIO_CODEC>;
+        AVDD-supply = <&vddao_1v8>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/apple,mca.yaml b/Documentation/devicetree/bindings/sound/apple,mca.yaml
new file mode 100644
index 0000000000..5c6ec08c7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/apple,mca.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/apple,mca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple MCA I2S transceiver
+
+description: |
+  MCA is an I2S transceiver peripheral found on M1 and other Apple chips. It is
+  composed of a number of identical clusters which can operate independently
+  or in an interlinked fashion. Up to 6 clusters have been seen on an MCA.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-mca
+          - apple,t8103-mca
+          - apple,t8112-mca
+      - const: apple,mca
+
+  reg:
+    items:
+      - description: Register region of the MCA clusters proper
+      - description: Register region of the DMA glue and its FIFOs
+
+  interrupts:
+    minItems: 4
+    maxItems: 6
+    description:
+      One interrupt per each cluster
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  dmas:
+    minItems: 16
+    maxItems: 24
+    description:
+      DMA channels corresponding to the SERDES units in the peripheral. They are
+      listed in groups of four per cluster, and within the group they are given
+      as associated to the TXA, RXA, TXB, RXB units.
+
+  dma-names:
+    minItems: 16
+    items:
+      - const: tx0a
+      - const: rx0a
+      - const: tx0b
+      - const: rx0b
+      - const: tx1a
+      - const: rx1a
+      - const: tx1b
+      - const: rx1b
+      - const: tx2a
+      - const: rx2a
+      - const: tx2b
+      - const: rx2b
+      - const: tx3a
+      - const: rx3a
+      - const: tx3b
+      - const: rx3b
+      - const: tx4a
+      - const: rx4a
+      - const: tx4b
+      - const: rx4b
+      - const: tx5a
+      - const: rx5a
+      - const: tx5b
+      - const: rx5b
+    description: |
+      Names for the DMA channels: 'tx'/'rx', then cluster number, then 'a'/'b'
+      based on the associated SERDES unit.
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+    description:
+      Clusters' input reference clock.
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 7
+    description:
+      First a general power domain for register access, then the power
+      domains of individual clusters for their operation.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - clocks
+  - power-domains
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mca: i2s@9b600000 {
+      compatible = "apple,t6000-mca", "apple,mca";
+      reg = <0x9b600000 0x10000>,
+            <0x9b200000 0x20000>;
+
+      clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+      power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+                      <&ps_mca2>, <&ps_mca3>;
+      dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+             <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+             <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+             <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+      dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+                  "tx1a", "rx1a", "tx1b", "rx1b",
+                  "tx2a", "rx2a", "tx2b", "rx2b",
+                  "tx3a", "rx3a", "tx3b", "rx3b";
+
+      #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/arm,pl041.yaml b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
new file mode 100644
index 0000000000..7896b8150c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/arm,pl041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL041 AACI sound interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant
+  peripheral that provides communication with an audio CODEC using the AC-link
+  protocol.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl041
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl041
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: APB register access clock
+
+  clock-names:
+    const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio-controller@40000 {
+        compatible = "arm,pl041", "arm,primecell";
+        reg = <0x040000 0x1000>;
+        interrupts = <11>;
+        clocks = <&v2m_clk24mhz>;
+        clock-names = "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/armada-370db-audio.txt b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
new file mode 100644
index 0000000000..953c092db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/armada-370db-audio.txt
@@ -0,0 +1,26 @@
+Device Tree bindings for the Armada 370 DB audio
+================================================
+
+These Device Tree bindings are used to describe the audio complex
+found on the Armada 370 DB platform.
+
+Mandatory properties:
+
+ * compatible: must be "marvell,a370db-audio"
+
+ * marvell,audio-controller: a phandle that points to the audio
+   controller of the Armada 370 SoC.
+
+ * marvell,audio-codec: a set of three phandles that points to:
+
+    1/ the analog audio codec connected to the Armada 370 SoC
+    2/ the S/PDIF transceiver
+    3/ the S/PDIF receiver
+
+Example:
+
+	sound {
+	      compatible = "marvell,a370db-audio";
+	      marvell,audio-controller = <&audio_controller>;
+	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
new file mode 100644
index 0000000000..4477f84b7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak4458.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak4458.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4458 audio DAC
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - asahi-kasei,ak4458
+      - asahi-kasei,ak4497
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply
+
+  dvdd-supply:
+    description: Digital power supply
+
+  reset-gpios:
+    maxItems: 1
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO used to mute all the outputs
+
+  dsd-path:
+    description: Select DSD input pins for ak4497
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - const: 0
+        description: "select #16, #17, #19 pins"
+      - const: 1
+        description: "select #3, #4, #5 pins"
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: asahi-kasei,ak4458
+
+    then:
+      properties:
+        dsd-path: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@10 {
+            compatible = "asahi-kasei,ak4458";
+            reg = <0x10>;
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml b/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
new file mode 100644
index 0000000000..d3d494ae8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/asahi-kasei,ak5558.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/asahi-kasei,ak5558.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK5558 8 channel differential 32-bit delta-sigma ADC
+
+maintainers:
+  - Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>
+  - Mihai Serban <mihai.serban@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - asahi-kasei,ak5552
+      - asahi-kasei,ak5558
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.2V supply that powers up the DVDD pin.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ak5558: codec@10 {
+            compatible = "asahi-kasei,ak5558";
+            reg = <0x10>;
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
new file mode 100644
index 0000000000..43d04702ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-classd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel ClassD Amplifier
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The Audio Class D Amplifier (CLASSD) is a digital input, Pulse Width
+  Modulated (PWM) output stereo Class D amplifier.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-classd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: CLASSD
+    description: The user-visible name of this sound complex.
+
+  atmel,pwm-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - single
+      - diff
+    default: single
+    description: PWM modulation type.
+
+  atmel,non-overlap-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 5
+      - 10
+      - 15
+      - 20
+    default: 10
+    description:
+      Set non-overlapping time, the unit is nanosecond(ns).
+      Non-overlapping will be disabled if not specified.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    classd: sound@fc048000 {
+        compatible = "atmel,sama5d2-classd";
+        reg = <0xfc048000 0x100>;
+        interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+            | AT91_XDMAC_DT_PERID(47))>;
+        dma-names = "tx";
+        clocks = <&classd_clk>, <&classd_gclk>;
+        clock-names = "pclk", "gclk";
+        assigned-clocks = <&classd_gclk>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_classd_default>;
+        atmel,model = "classd @ SAMA5D2-Xplained";
+        atmel,pwm-type = "diff";
+        atmel,non-overlap-time = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
new file mode 100644
index 0000000000..0cd1ff89ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel I2S controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel I2S (Inter-IC Sound Controller) bus is the standard
+  interface for connecting audio devices, such as audio codecs.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: Generated clock (Optional)
+      - description: I2S mux clock (Optional). Set
+          with gclk when Master Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+      - const: muxclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f8050000 {
+        compatible = "atmel,sama5d2-i2s";
+        reg = <0xf8050000 0x300>;
+        interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(31))>,
+               <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(32))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+        clock-names = "pclk", "gclk", "muxclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s0_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
new file mode 100644
index 0000000000..f320b561f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel PDMIC decoder
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel Pulse Density Modulation Interface Controller
+  (PDMIC) peripheral is a mono PDM decoder module
+  that decodes an incoming PDM sample stream.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-pdmic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: generated clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  atmel,mic-min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The minimal frequency that the microphone supports.
+
+  atmel,mic-max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximal frequency that the microphone supports.
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: PDMIC
+    description: The user-visible name of this sound card.
+
+  atmel,mic-offset:
+    $ref: /schemas/types.yaml#/definitions/int32
+    default: 0
+    description: The offset that should be added.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+  - atmel,mic-min-freq
+  - atmel,mic-max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pdmic: sound@f8018000 {
+        compatible = "atmel,sama5d2-pdmic";
+        reg = <0xf8018000 0x124>;
+        interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+                | AT91_XDMAC_DT_PERID(50))>;
+        dma-names = "rx";
+        clocks = <&pdmic_clk>, <&pdmic_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pdmic_default>;
+        atmel,model = "PDMIC@sama5d2_xplained";
+        atmel,mic-min-freq = <1000000>;
+        atmel,mic-max-freq = <3246000>;
+        atmel,mic-offset = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt
new file mode 100644
index 0000000000..9c5a9947b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt
@@ -0,0 +1,26 @@
+* Atmel at91sam9g20ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,at91sam9g20ek-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,audio-routing: A list of the connections between audio components.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+	compatible = "atmel,at91sam9g20ek-wm8731-audio";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+	atmel,model = "wm8731 @ AT91SAMG20EK";
+
+	atmel,audio-routing =
+		"Ext Spk", "LHPOUT",
+		"Int MIC", "MICIN";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
new file mode 100644
index 0000000000..8facbce53d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -0,0 +1,35 @@
+* Atmel at91sam9x5ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,sam9x5-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headphone Jack
+ * Line In Jack
+
+wm8731 pins:
+cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
+
+Example:
+sound {
+	compatible = "atmel,sam9x5-wm8731-audio";
+
+	atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "RHPOUT",
+		"Headphone Jack", "LHPOUT",
+		"LLINEIN", "Line In Jack",
+		"RLINEIN", "Line In Jack";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel-wm8904.txt b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
new file mode 100644
index 0000000000..8bbe50c884
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-wm8904.txt
@@ -0,0 +1,55 @@
+Atmel ASoC driver with wm8904 audio codec complex
+
+Required properties:
+  - compatible: "atmel,asoc-wm8904"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source. Valid names for sources and
+    sinks are the WM8904's pins, and the jacks on the board:
+
+    WM8904 pins:
+
+    * IN1L
+    * IN1R
+    * IN2L
+    * IN2R
+    * IN3L
+    * IN3R
+    * HPOUTL
+    * HPOUTR
+    * LINEOUTL
+    * LINEOUTR
+    * MICBIAS
+
+    Board connectors:
+
+    * Headphone Jack
+    * Line In Jack
+    * Mic
+
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8904 audio codec
+
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+	compatible = "atmel,asoc-wm8904";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+	atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "HPOUTL",
+		"Headphone Jack", "HPOUTR",
+		"IN2L", "Line In Jack",
+		"IN2R", "Line In Jack",
+		"Mic", "MICBIAS",
+		"IN1L", "Mic";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8904>;
+};
diff --git a/Documentation/devicetree/bindings/sound/atmel_ac97c.txt b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt
new file mode 100644
index 0000000000..b151bd902c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt
@@ -0,0 +1,20 @@
+* Atmel AC97 controller
+
+Required properties:
+  - compatible: "atmel,at91sam9263-ac97c"
+  - reg: Address and length of the register set for the device
+  - interrupts: Should contain AC97 interrupt
+  - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound@fffa0000 {
+       compatible = "atmel,at91sam9263-ac97c";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ac97>;
+       reg = <0xfffa0000 0x4000>;
+       interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+
+       ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 0000000000..274092ef36
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+allOf:
+  - $ref: /schemas/sound/audio-graph.yaml#
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card
+      - audio-graph-scu-card
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card";
+
+        dais = <&cpu_port_a>;
+    };
+
+    cpu {
+        /*
+         * dai-controller own settings
+         */
+
+        port {
+            cpu_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+                dai-format = "left_j";
+            };
+        };
+    };
+
+    codec {
+        /*
+         * codec own settings
+         */
+
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&cpu_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
new file mode 100644
index 0000000000..d3ce4de449
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card2
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card2
+  links:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  multi:
+    type: object
+    description: Multi-CPU/Codec node
+  dpcm:
+    type: object
+    description: DPCM node
+  codec2codec:
+    type: object
+    description: Codec to Codec node
+
+required:
+  - compatible
+  - links
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
new file mode 100644
index 0000000000..fa9f9a8533
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card 'port'
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+select: false
+
+definitions:
+  port-base:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    properties:
+      convert-rate:
+        $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate
+      convert-channels:
+        $ref: /schemas/sound/dai-params.yaml#/$defs/dai-channels
+      convert-sample-format:
+        $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-format
+      mclk-fs:
+        $ref: simple-card.yaml#/definitions/mclk-fs
+
+  endpoint-base:
+    $ref: /schemas/graph.yaml#/$defs/endpoint-base
+    properties:
+      mclk-fs:
+        $ref: simple-card.yaml#/definitions/mclk-fs
+      frame-inversion:
+        description: dai-link uses frame clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-inversion:
+        description: dai-link uses bit clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      frame-master:
+        description: Indicates dai-link frame master.
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
+      bitclock-master:
+        description: Indicates dai-link bit clock master
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
+      clocks:
+        description: Indicates system clock
+        $ref: /schemas/types.yaml#/definitions/phandle
+      system-clock-frequency:
+        $ref: simple-card.yaml#/definitions/system-clock-frequency
+      system-clock-direction-out:
+        $ref: simple-card.yaml#/definitions/system-clock-direction-out
+      system-clock-fixed:
+        $ref: simple-card.yaml#/definitions/system-clock-fixed
+
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+            - ac97
+            - pdm
+            - msb
+            - lsb
+      convert-rate:
+        $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate
+      convert-channels:
+        $ref: /schemas/sound/dai-params.yaml#/$defs/dai-channels
+      convert-sample-format:
+        $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-format
+
+      dai-tdm-slot-num:
+        description: Number of slots in use.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      dai-tdm-slot-width:
+        description: Width in bits for each slot.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      dai-tdm-slot-width-map:
+        description: Mapping of sample widths to slot widths. For hardware
+          that cannot support a fixed slot width or a slot width always
+          equal to sample width. A matrix of one or more 3-tuples.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            -
+              description: Sample width in bits
+              minimum: 8
+              maximum: 64
+            -
+              description: Slot width in bits
+              minimum: 8
+              maximum: 256
+            -
+              description: Slot count
+              minimum: 1
+              maximum: 64
+
+  ports:
+    $ref: "#/definitions/port-base"
+    unevaluatedProperties: false
+    patternProperties:
+      "^port(@[0-9a-f]+)?$":
+        $ref: "#/definitions/port-base"
+        unevaluatedProperties: false
+        patternProperties:
+          "^endpoint(@[0-9a-f]+)?":
+            $ref: "#/definitions/endpoint-base"
+            unevaluatedProperties: false
+
+allOf:
+  - $ref: "#/definitions/port-base"
+
+patternProperties:
+  "^endpoint(@[0-9a-f]+)?":
+    $ref: "#/definitions/endpoint-base"
+    unevaluatedProperties: false
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
new file mode 100644
index 0000000000..ed31e04ff6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  dais:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  prefix:
+    description: device name prefix
+    $ref: /schemas/types.yaml#/definitions/string
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  widgets:
+    description: |
+      User specified audio sound widgets.
+      Each entry is a pair of strings, the first being the type of
+      widget ("Microphone", "Line", "Headphone", "Speaker"), the
+      second being the machine specific name for the widget.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  convert-rate:
+    $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-rate
+  convert-channels:
+    $ref: /schemas/sound/dai-params.yaml#/$defs/dai-channels
+  convert-sample-format:
+    $ref: /schemas/sound/dai-params.yaml#/$defs/dai-sample-format
+
+  pa-gpios:
+    maxItems: 1
+  hp-det-gpio:
+    maxItems: 1
+  mic-det-gpio:
+    maxItems: 1
+
+required:
+  - dais
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml b/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml
new file mode 100644
index 0000000000..d3cc1ea4a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-iio-aux.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-iio-aux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio IIO auxiliary
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  Auxiliary device based on Industrial I/O device channels
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: audio-iio-aux
+
+  io-channels:
+    description:
+      Industrial I/O device channels used
+
+  io-channel-names:
+    description:
+      Industrial I/O channel names related to io-channels.
+      These names are used to provides sound controls, widgets and routes names.
+
+  snd-control-invert-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      A list of 0/1 flags defining whether or not the related channel is
+      inverted
+    items:
+      enum: [0, 1]
+      default: 0
+      description: |
+        Invert the sound control value compared to the IIO channel raw value.
+          - 1: The related sound control value is inverted meaning that the
+               minimum sound control value correspond to the maximum IIO channel
+               raw value and the maximum sound control value correspond to the
+               minimum IIO channel raw value.
+          - 0: The related sound control value is not inverted meaning that the
+               minimum (resp maximum) sound control value correspond to the
+               minimum (resp maximum) IIO channel raw value.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    iio-aux {
+        compatible = "audio-iio-aux";
+        io-channels = <&iio 0>, <&iio 1>, <&iio 2>, <&iio 3>;
+        io-channel-names = "CH0", "CH1", "CH2", "CH3";
+        /* Invert CH1 and CH2 */
+        snd-control-invert-range = <0 1 1 0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml
new file mode 100644
index 0000000000..bc6c6b1722
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/awinic,aw8738.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW8738 Audio Amplifier
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  The Awinic AW8738 is a simple audio amplifier with different operation modes
+  (set using one-wire pulse control). The mode configures the speaker-guard
+  function (primarily the power limit for the amplifier).
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: awinic,aw8738
+
+  mode-gpios:
+    description:
+      GPIO used for one-wire pulse control. The pin is typically called SHDN
+      (active-low), but this is misleading since it is actually more than
+      just a simple shutdown/enable control.
+    maxItems: 1
+
+  awinic,mode:
+    description: Operation mode (number of pulses for one-wire pulse control)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - mode-gpios
+  - awinic,mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    audio-amplifier {
+        compatible = "awinic,aw8738";
+        mode-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        awinic,mode = <5>;
+        sound-name-prefix = "Speaker Amp";
+    };
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
new file mode 100644
index 0000000000..4051c2538c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/awinic,aw88395.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW88395 Smart Audio Amplifier
+
+maintainers:
+  - Weidong Wang <wangweidong.a@awinic.com>
+
+description:
+  The Awinic AW88395 is an I2S/TDM input, high efficiency
+  digital Smart K audio amplifier with an integrated 10.25V
+  smart boost convert.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw88395
+      - awinic,aw88261
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@34 {
+            compatible = "awinic,aw88395";
+            reg = <0x34>;
+            #sound-dai-cells = <0>;
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
new file mode 100644
index 0000000000..b6cc5f6f78
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
@@ -0,0 +1,92 @@
+Devicetree bindings for the Axentia TSE-850 audio complex
+
+Required properties:
+  - compatible: "axentia,tse850-pcm5142"
+  - axentia,cpu-dai: The phandle of the cpu dai.
+  - axentia,audio-codec: The phandle of the PCM5142 codec.
+  - axentia,add-gpios: gpio specifier that controls the mixer.
+  - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
+  - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
+  - axentia,ana-supply: Regulator that supplies the output amplifier. Must
+    support voltages in the 2V - 20V range, in 1V steps.
+
+The schematics explaining the gpios are as follows:
+
+               loop1 relays
+   IN1 +---o  +------------+  o---+ OUT1
+            \                /
+             +              +
+             |   /          |
+             +--o  +--.     |
+             |  add   |     |
+             |        V     |
+             |      .---.   |
+   DAC +----------->|Sum|---+
+             |      '---'   |
+             |              |
+             +              +
+
+   IN2 +---o--+------------+--o---+ OUT2
+               loop2 relays
+
+The 'loop1' gpio pin controls two relays, which are either in loop position,
+meaning that input and output are directly connected, or they are in mixer
+position, meaning that the signal is passed through the 'Sum' mixer. Similarly
+for 'loop2'.
+
+In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
+(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
+are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
+are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
+the PCM5142 codec.
+
+Example:
+
+	&ssc0 {
+		#sound-dai-cells = <0>;
+
+	};
+
+	&i2c {
+		codec: pcm5142@4c {
+			compatible = "ti,pcm5142";
+
+			reg = <0x4c>;
+
+			AVDD-supply = <&reg_3v3>;
+			DVDD-supply = <&reg_3v3>;
+			CPVDD-supply = <&reg_3v3>;
+
+			clocks = <&sck>;
+
+			pll-in = <3>;
+			pll-out = <6>;
+		};
+	};
+
+	ana: ana-reg {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,cpu-dai = <&ssc0>;
+		axentia,audio-codec = <&codec>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt
new file mode 100644
index 0000000000..7bb0362828
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt
@@ -0,0 +1,24 @@
+* Broadcom BCM2835 SoC I2S/PCM module
+
+Required properties:
+- compatible: "brcm,bcm2835-i2s"
+- reg: Should contain PCM registers location and length.
+- clocks: the (PCM) clock to use
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+	compatible = "brcm,bcm2835-i2s";
+	reg = <0x7e203000 0x24>;
+	clocks = <&clocks BCM2835_CLOCK_PCM>;
+
+	dmas = <&dma 2>,
+	       <&dma 3>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
new file mode 100644
index 0000000000..007f524b4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible:     Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells:    32bit valued, 0 cell.
+- reg:            Should contain audio registers location and length
+- interrupts:     Should contain the interrupt for the controller.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    One of each entry matching the clocks phandles list:
+                  - "i2sclk" (generated clock) Required.
+                  - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+      works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+		i2s: bcm63xx-i2s {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63xx-i2s";
+			reg = <0xFF802080 0xFF>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2sclk>, <&osc>;
+			clock-names = "i2sclk","i2sosc";
+		};
diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
new file mode 100644
index 0000000000..630bf7c034
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
@@ -0,0 +1,63 @@
+BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
+
+Required properties:
+	- compatible : "brcm,cygnus-audio"
+	- #address-cells: 32bit valued, 1 cell.
+	- #size-cells:  32bit valued, 0 cell.
+	- reg : Should contain audio registers location and length
+	- reg-names: names of the registers listed in "reg" property
+		Valid names are "aud" and "i2s_in". "aud" contains a
+		set of DMA, I2S_OUT and SPDIF registers. "i2s_in" contains
+		a set of I2S_IN registers.
+	- clocks: PLL and leaf clocks used by audio ports
+	- assigned-clocks: PLL and leaf clocks
+	- assigned-clock-parents: parent clocks of the assigned clocks
+		(usually the PLL)
+	- assigned-clock-rates: List of clock frequencies of the
+		assigned clocks
+	- clock-names: names of 3 leaf clocks used by audio ports
+		Valid names are "ch0_audio", "ch1_audio", "ch2_audio"
+	- interrupts: audio DMA interrupt number
+
+SSP Subnode properties:
+- reg: The index of ssp port interface to use
+	Valid value are 0, 1, 2, or 3 (for spdif)
+
+Example:
+	cygnus_audio: audio@180ae000 {
+		compatible = "brcm,cygnus-audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x180ae000 0xafd>, <0x180aec00 0x1f8>;
+		reg-names = "aud", "i2s_in";
+		clocks = <&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
+				<&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
+				<&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
+		assigned-clocks = <&audiopll BCM_CYGNUS_AUDIOPLL>,
+							<&audiopll BCM_CYGNUS_AUDIOPLL_CH0>,
+							<&audiopll BCM_CYGNUS_AUDIOPLL_CH1>,
+							<&audiopll BCM_CYGNUS_AUDIOPLL_CH2>;
+		assigned-clock-parents = <&audiopll BCM_CYGNUS_AUDIOPLL>;
+		assigned-clock-rates = <1769470191>,
+								<0>,
+								<0>,
+								<0>;
+		clock-names = "ch0_audio", "ch1_audio", "ch2_audio";
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+
+		ssp0: ssp_port@0 {
+			reg = <0>;
+		};
+
+		ssp1: ssp_port@1 {
+			reg = <1>;
+		};
+
+		ssp2: ssp_port@2 {
+			reg = <2>;
+		};
+
+		spdif: spdif_port@3 {
+			reg = <3>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
new file mode 100644
index 0000000000..860fc0da39
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt
@@ -0,0 +1,18 @@
+Bindings for I2S controller built into xtfpga Xtensa bitstreams.
+
+Required properties:
+- compatible: shall be "cdns,xtfpga-i2s".
+- reg: memory region (address and length) with device registers.
+- interrupts: interrupt for the device.
+- clocks: phandle to the clk used as master clock. I2S bus clock
+  is derived from it.
+
+Examples:
+
+	i2s0: xtfpga-i2s@d080000 {
+		#sound-dai-cells = <0>;
+		compatible = "cdns,xtfpga-i2s";
+		reg = <0x0d080000 0x40>;
+		interrupts = <2 1>;
+		clocks = <&cdce706 4>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
new file mode 100644
index 0000000000..14dea1feef
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l41.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L41 Speaker Amplifier
+
+maintainers:
+  - david.rhodes@cirrus.com
+
+description: |
+  CS35L41 is a boosted mono Class D amplifier with DSP
+  speaker protection and equalization
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l40
+      - cirrus,cs35l41
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  VA-supply:
+    description: voltage regulator phandle for the VA supply
+
+  VP-supply:
+    description: voltage regulator phandle for the VP supply
+
+  cirrus,boost-peak-milliamp:
+    description:
+      Boost-converter peak current limit in mA.
+      Configures the peak current by monitoring the current through the boost FET.
+      Range starts at 1600 mA and goes to a maximum of 4500 mA with increments
+      of 50 mA. See section 4.3.6 of the datasheet for details.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1600
+    maximum: 4500
+    default: 4500
+
+  cirrus,boost-ind-nanohenry:
+    description:
+      Boost inductor value, expressed in nH. Valid
+      values include 1000, 1200, 1500 and 2200.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000
+    maximum: 2200
+
+  cirrus,boost-cap-microfarad:
+    description:
+      Total equivalent boost capacitance on the VBST
+      and VAMP pins, derated at 11 volts DC. The value must be rounded to the
+      nearest integer and expressed in uF.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cirrus,asp-sdout-hiz:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier.
+      0 = Logic 0 during unused slots, and while all transmit channels disabled
+      1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled
+      2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled
+      3 = Hi-Z during unused slots and while all transmit channels disabled
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 2
+
+  cirrus,boost-type:
+    description:
+      Configures the type of Boost being used.
+      Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and
+      boost-cap-microfarad.
+      External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
+      enable boost voltage.
+      Shared boost allows two amplifiers to share a single boost circuit by
+      communicating on the MDSYNC bus. The active amplifier controls the boost
+      circuit using combined data from both amplifiers. GPIO1 should be
+      configured for Sync when shared boost is used. Shared boost is not
+      compatible with External boost. Active amplifier requires
+      boost-peak-milliamp, boost-ind-nanohenry and boost-cap-microfarad.
+      0 = Internal Boost
+      1 = External Boost
+      2 = Shared Boost Active
+      3 = Shared Boost Passive
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+  cirrus,gpio1-polarity-invert:
+    description:
+      Boolean which specifies whether the GPIO1
+      level is inverted. If this property is not present the level is not inverted.
+    type: boolean
+
+  cirrus,gpio1-output-enable:
+    description:
+      Boolean which specifies whether the GPIO1 pin
+      is configured as an output. If this property is not present the
+      pin will be configured as an input.
+    type: boolean
+
+  cirrus,gpio1-src-select:
+    description:
+      Configures the function of the GPIO1 pin.
+      Note that the options are different from the GPIO2 pin
+      0 = High Impedance (Default)
+      1 = GPIO
+      2 = Sync
+      3 = MCLK input
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+  cirrus,gpio2-polarity-invert:
+    description:
+      Boolean which specifies whether the GPIO2
+      level is inverted. If this property is not present the level is not inverted.
+    type: boolean
+
+  cirrus,gpio2-output-enable:
+    description:
+      Boolean which specifies whether the GPIO2 pin
+      is configured as an output. If this property is not present the
+      pin will be configured as an input.
+    type: boolean
+
+  cirrus,gpio2-src-select:
+    description:
+      Configures the function of the GPIO2 pin.
+      Note that the options are different from the GPIO1 pin.
+      0 = High Impedance (Default)
+      1 = GPIO
+      2 = Open Drain INTB
+      3 = MCLK input
+      4 = Push-pull INTB (active low)
+      5 = Push-pull INT (active high)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        cirrus,boost-type:
+          const: 0
+    then:
+      required:
+        - cirrus,boost-peak-milliamp
+        - cirrus,boost-ind-nanohenry
+        - cirrus,boost-cap-microfarad
+    else:
+      if:
+        properties:
+          cirrus,boost-type:
+            const: 1
+      then:
+        required:
+          - cirrus,gpio1-output-enable
+          - cirrus,gpio1-src-select
+        properties:
+          cirrus,boost-peak-milliamp: false
+          cirrus,boost-ind-nanohenry: false
+          cirrus,boost-cap-microfarad: false
+          cirrus,gpio1-src-select:
+            enum: [1]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l41: speaker-amp@2 {
+            #sound-dai-cells = <1>;
+            compatible = "cirrus,cs35l41";
+            reg = <2>;
+            VA-supply = <&dummy_vreg>;
+            VP-supply = <&dummy_vreg>;
+            reset-gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+
+            cirrus,boost-type = <0>;
+            cirrus,boost-peak-milliamp = <4500>;
+            cirrus,boost-ind-nanohenry = <1000>;
+            cirrus,boost-cap-microfarad = <15>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
new file mode 100644
index 0000000000..4c9acb8d4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L45 Speaker Amplifier
+
+maintainers:
+  - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
+  - Richard Fitzgerald <rf@opensource.cirrus.com>
+
+description: |
+  CS35L45 is a Boosted Mono Class D Amplifier with DSP
+  Speaker Protection and Adaptive Battery Management.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l45
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: voltage regulator phandle for the VDD_A supply
+
+  vdd-batt-supply:
+    description: voltage regulator phandle for the VDD_BATT supply
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  cirrus,asp-sdout-hiz-ctrl:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier. Logical OR of
+      CS35L45_ASP_TX_HIZ_xxx values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 2
+
+patternProperties:
+  "^cirrus,gpio-ctrl[1-3]$":
+    description:
+      GPIO pins configuration.
+    type: object
+    additionalProperties: false
+    properties:
+      gpio-dir:
+        description:
+          GPIO pin direction. Valid only when 'gpio-ctrl' is 1
+            0 = Output
+            1 = Input
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+        default: 1
+      gpio-lvl:
+        description:
+          GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
+            0 = Low
+            1 = High
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+        default: 0
+      gpio-op-cfg:
+        description:
+          GPIO level. Valid only when 'gpio-ctrl' is 1 and 'gpio-dir' is 0
+            0 = CMOS
+            1 = Open Drain
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+        default: 0
+      gpio-pol:
+        description:
+          GPIO output polarity select. Valid only when 'gpio-ctrl' is 1
+          and 'gpio-dir' is 0
+            0 = Non-inverted, Active High
+            1 = Inverted, Active Low
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1
+        default: 0
+      gpio-ctrl:
+        description:
+          Defines the function of the GPIO pin.
+          GPIO1
+            0 = High impedance input
+            1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
+            2 = Pin acts as MDSYNC, direction controlled by MDSYNC
+            3-7 = Reserved
+          GPIO2
+            0 = High impedance input
+            1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
+            2 = Pin acts as open drain INT
+            3 = Reserved
+            4 = Pin acts as push-pull output INT. Active low.
+            5 = Pin acts as push-pull output INT. Active high.
+            6,7 = Reserved
+          GPIO3
+            0 = High impedance input
+            1 = Pin acts as a GPIO, direction controlled by 'gpio-dir'
+            2-7 = Reserved
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        default: 0
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs35l45.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l45: cs35l45@2 {
+          #sound-dai-cells = <1>;
+          compatible = "cirrus,cs35l45";
+          reg = <2>;
+          spi-max-frequency = <5000000>;
+          vdd-a-supply = <&dummy_vreg>;
+          vdd-batt-supply = <&dummy_vreg>;
+          reset-gpios = <&gpio 110 0>;
+          cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
+                                        CS35L45_ASP_TX_HIZ_DISABLED)>;
+          cirrus,gpio-ctrl1 {
+             gpio-ctrl = <0x2>;
+          };
+          cirrus,gpio-ctrl2 {
+             gpio-ctrl = <0x2>;
+          };
+          cirrus,gpio-ctrl3 {
+             gpio-ctrl = <0x1>;
+             gpio-dir = <0x1>;
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
new file mode 100644
index 0000000000..156560b2a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs4234.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic cs4234 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS4234 is a highly versatile CODEC that combines 4 channels of
+  high performance analog to digital conversion, 4 channels of high
+  performance digital to analog conversion for audio, and 1 channel of
+  digital to analog conversion to provide a nondelayed audio reference
+  signal to an external Class H tracking power supply. If not used to
+  drive a tracking power supply, the 5th DAC can instead be used as a
+  standard audio grade DAC, with performance specifications identical
+  to that of the 4 DACs in the audio path. Additionally, the CS4234
+  includes tunable group delay for each of the 4 audio DAC paths to
+  provide lead time for the external switch-mode power supply, and a
+  nondelayed path into the DAC outputs for input signals requiring a
+  low-latency path to the outputs.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs4234
+
+  reg:
+    description:
+      The 7-bit I2C address depends on the state of the ADx pins, in
+      binary given by [0 0 1 0 AD2 AD1 AD0 0].
+    items:
+      minimum: 0x10
+      maximum: 0x17
+
+  VA-supply:
+    description:
+      Analogue power supply.
+
+  VL-supply:
+    description:
+      Interface power supply.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - VA-supply
+  - VL-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        cs4234: codec@11 {
+            compatible = "cirrus,cs4234";
+            reg = <0x11>;
+
+            VA-supply = <&vdd3v3>;
+            VL-supply = <&vdd3v3>;
+
+            reset-gpios = <&gpio 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
new file mode 100644
index 0000000000..af599d8735
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L42 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS42L42 is a low-power audio codec designed for portable applications.
+  It provides a high-dynamic range, stereo DAC for audio playback and a mono
+  high-dynamic-range ADC for audio capture. There is an integrated headset
+  detection block.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l42
+      - cirrus,cs42l83
+
+  reg:
+    description:
+      The I2C address of the CS42L42.
+    maxItems: 1
+
+  VP-supply:
+    description:
+      VP power supply.
+
+  VCP-supply:
+    description:
+      Charge pump power supply.
+
+  VD_FILT-supply:
+    description:
+      FILT+ power supply.
+
+  VL-supply:
+    description:
+      Logic power supply.
+
+  VA-supply:
+    description:
+      Analog power supply.
+
+  reset-gpios:
+    description:
+      This pin will be asserted and then deasserted to reset the
+      CS42L42 before communication starts.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for CS42L42 IRQ line.
+    maxItems: 1
+
+  cirrus,ts-inv:
+    description: |
+      Sets the behaviour of the jack plug detect switch.
+
+      0 - (Default) Shorted to tip when unplugged, open when plugged.
+      This is "inverted tip sense (ITS)" in the datasheet.
+
+      1 - Open when unplugged, shorted to tip when plugged.
+      This is "normal tip sense (TS)" in the datasheet.
+
+      The CS42L42_TS_INV_* defines are available for this.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+
+  cirrus,ts-dbnc-rise:
+    description: |
+      Debounce the rising edge of TIP_SENSE_PLUG. With no
+      debounce, the tip sense pin might be noisy on a plug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  cirrus,ts-dbnc-fall:
+    description: |
+      Debounce the falling edge of TIP_SENSE_UNPLUG. With no
+      debounce, the tip sense pin might be noisy on an unplug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+
+  cirrus,btn-det-init-dbnce:
+    description: |
+      This sets how long to wait after enabling button detection
+      interrupts before servicing button interrupts, to allow the
+      HS bias time to settle. Value is in milliseconds.
+      There may be erroneous button interrupts if this debounce time
+      is too short.
+
+      0ms - 200ms,
+      Default = 100ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 200
+
+  cirrus,btn-det-event-dbnce:
+    description: |
+      This sets how long to wait after receiving a button press
+      interrupt before processing it. Allows time for the button
+      press to make a clean connection with the bias resistors.
+      Value is in milliseconds.
+
+      0ms - 20ms,
+      Default = 10ms
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 20
+
+  cirrus,bias-lvls:
+    description: |
+      For a level-detect headset button scheme, each button will bias
+      the mic pin to a certain voltage. To determine which button was
+      pressed, the voltage is compared to sequential, decreasing
+      voltages, until the compared voltage < bias voltage.
+      For different hardware setups, a designer might want to tweak this.
+      This is an array of descending values for the comparator voltage,
+      given as percent of the HSBIAS voltage.
+
+      Array of 4 values, each 0-63
+      < x1 x2 x3 x4 >
+      Default = < 15 8 4 1 >
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 63
+
+  cirrus,hs-bias-ramp-rate:
+    description: |
+      If present this sets the rate that the HS bias should rise and fall.
+      The actual rise and fall times depend on external hardware (the
+      datasheet gives several rise and fall time examples).
+
+      0 - Fast rise time; slow, load-dependent fall time
+      1 - Fast
+      2 - Slow (default)
+      3 - Slowest
+
+      The CS42L42_HSBIAS_RAMP_* defines are available for this.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+
+  cirrus,hs-bias-sense-disable:
+    description: |
+      If present the HSBIAS sense is disabled. Configures HSBIAS output
+      current sense through the external 2.21-k resistor. HSBIAS_SENSE
+      is a hardware feature to reduce the potential pop noise when the
+      headset plug is removed slowly. But on some platforms ESD voltage
+      will affect it causing plug detection to fail, especially with CTIA
+      headset type. For different hardware setups, a designer might want
+      to tweak default behavior.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - VP-supply
+  - VCP-supply
+  - VD_FILT-supply
+  - VL-supply
+  - VA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs42l42.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l42: cs42l42@48 {
+          compatible = "cirrus,cs42l42";
+          reg = <0x48>;
+          VA-supply = <&dummy_vreg>;
+          VP-supply = <&dummy_vreg>;
+          VCP-supply = <&dummy_vreg>;
+          VD_FILT-supply = <&dummy_vreg>;
+          VL-supply = <&dummy_vreg>;
+
+          reset-gpios = <&axi_gpio_0 1 0>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <55 8>;
+
+          cirrus,ts-inv = <CS42L42_TS_INV_DIS>;
+          cirrus,ts-dbnc-rise = <CS42L42_TS_DBNCE_1000>;
+          cirrus,ts-dbnc-fall = <CS42L42_TS_DBNCE_0>;
+          cirrus,btn-det-init-dbnce = <100>;
+          cirrus,btn-det-event-dbnce = <10>;
+          cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
+          cirrus,hs-bias-ramp-rate = <CS42L42_HSBIAS_RAMP_SLOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
new file mode 100644
index 0000000000..4118aa54bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l43.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l43.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L43 Audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
+  (Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
+  for portable applications. It provides a high dynamic range, stereo
+  DAC for headphone output, two integrated Class D amplifiers for
+  loudspeakers, and two ADCs for wired headset microphone input or
+  stereo line input. PDM inputs are provided for digital microphones.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l43
+
+  reg:
+    maxItems: 1
+
+  vdd-p-supply:
+    description:
+      Power supply for the high voltage interface.
+
+  vdd-a-supply:
+    description:
+      Power supply for internal analog circuits.
+
+  vdd-d-supply:
+    description:
+      Power supply for internal digital circuits. Can be internally supplied.
+
+  vdd-io-supply:
+    description:
+      Power supply for external interface and internal digital logic.
+
+  vdd-cp-supply:
+    description:
+      Power supply for the amplifier 3 and 4 charge pump.
+
+  vdd-amp-supply:
+    description:
+      Power supply for amplifier 1 and 2.
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: Synchronous audio clock provided on mclk_in.
+
+  clock-names:
+    const: mclk
+
+  cirrus,bias-low:
+    type: boolean
+    description:
+      Select a 1.8V headset micbias rather than 2.8V.
+
+  cirrus,bias-sense-microamp:
+    description:
+      Current at which the headset micbias sense clamp will engage, 0 to
+      disable.
+    enum: [ 0, 14, 24, 43, 52, 61, 71, 90, 99 ]
+    default: 0
+
+  cirrus,bias-ramp-ms:
+    description:
+      Time in milliseconds the hardware allows for the headset micbias to
+      ramp up.
+    enum: [ 10, 40, 90, 170 ]
+    default: 170
+
+  cirrus,detect-us:
+    description:
+      Time in microseconds the type detection will run for. Long values will
+      cause more audible effects, but give more accurate detection.
+    enum: [ 20, 100, 1000, 10000, 50000, 75000, 100000, 200000 ]
+    default: 10000
+
+  cirrus,button-automute:
+    type: boolean
+    description:
+      Enable the hardware automuting of decimator 1 when a headset button is
+      pressed.
+
+  cirrus,buttons-ohms:
+    description:
+      Impedance in Ohms for each headset button, these should be listed in
+      ascending order.
+    minItems: 1
+    maxItems: 6
+
+  cirrus,tip-debounce-ms:
+    description:
+      Software debounce on tip sense triggering in milliseconds.
+    default: 0
+
+  cirrus,tip-invert:
+    type: boolean
+    description:
+      Indicates tip detect polarity, inverted implies open-circuit whilst the
+      jack is inserted.
+
+  cirrus,tip-disable-pullup:
+    type: boolean
+    description:
+      Indicates if the internal pullup on the tip detect should be disabled.
+
+  cirrus,tip-fall-db-ms:
+    description:
+      Time in milliseconds a falling edge on the tip detect should be hardware
+      debounced for. Note the falling edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,tip-rise-db-ms:
+    description:
+      Time in milliseconds a rising edge on the tip detect should be hardware
+      debounced for. Note the rising edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,use-ring-sense:
+    type: boolean
+    description:
+      Indicates if the ring sense should be used.
+
+  cirrus,ring-invert:
+    type: boolean
+    description:
+      Indicates ring detect polarity, inverted implies open-circuit whilst the
+      jack is inserted.
+
+  cirrus,ring-disable-pullup:
+    type: boolean
+    description:
+      Indicates if the internal pullup on the ring detect should be disabled.
+
+  cirrus,ring-fall-db-ms:
+    description:
+      Time in milliseconds a falling edge on the ring detect should be hardware
+      debounced for. Note the falling edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  cirrus,ring-rise-db-ms:
+    description:
+      Time in milliseconds a rising edge on the ring detect should be hardware
+      debounced for. Note the rising edge is considered after the invert.
+    enum: [ 0, 125, 250, 500, 750, 1000, 1250, 1500 ]
+    default: 500
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+    additionalProperties: false
+
+    properties:
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      gpio-ranges:
+        items:
+          - description: A phandle to the CODEC pinctrl node
+            minimum: 0
+          - const: 0
+          - const: 0
+          - const: 3
+
+    patternProperties:
+      "-state$":
+        oneOf:
+          - $ref: "#/$defs/cirrus-cs42l43-state"
+          - patternProperties:
+              "-pins$":
+                $ref: "#/$defs/cirrus-cs42l43-state"
+            additionalProperties: false
+
+  spi:
+    type: object
+    $ref: /schemas/spi/spi-controller.yaml#
+    unevaluatedProperties: false
+
+$defs:
+  cirrus-cs42l43-state:
+    type: object
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml#
+      - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+    oneOf:
+      - required: [ groups ]
+      - required: [ pins ]
+
+    additionalProperties: false
+
+    properties:
+      groups:
+        enum: [ gpio1, gpio2, gpio3, asp, pdmout2, pdmout1, i2c, spi ]
+
+      pins:
+        enum: [ gpio1, gpio2, gpio3,
+                asp_dout, asp_fsync, asp_bclk,
+                pdmout2_clk, pdmout2_data, pdmout1_clk, pdmout1_data,
+                i2c_sda, i2c_scl,
+                spi_miso, spi_sck, spi_ssb ]
+
+      function:
+        enum: [ gpio, spdif, irq, mic-shutter, spk-shutter ]
+
+      drive-strength:
+        description: Set drive strength in mA
+        enum: [ 1, 2, 4, 8, 9, 10, 12, 16 ]
+
+      input-debounce:
+        description: Set input debounce in uS
+        enum: [ 0, 85 ]
+
+required:
+  - compatible
+  - reg
+  - vdd-p-supply
+  - vdd-a-supply
+  - vdd-io-supply
+  - vdd-cp-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs42l43: codec@1a {
+            compatible = "cirrus,cs42l43";
+            reg = <0x1a>;
+
+            vdd-p-supply = <&vdd5v0>;
+            vdd-a-supply = <&vdd1v8>;
+            vdd-io-supply = <&vdd1v8>;
+            vdd-cp-supply = <&vdd1v8>;
+            vdd-amp-supply = <&vdd5v0>;
+
+            reset-gpios = <&gpio 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio>;
+            interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+            #sound-dai-cells = <1>;
+
+            clocks = <&clks 0>;
+            clock-names = "mclk";
+
+            cs42l43_pins: pinctrl {
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&cs42l43_pins 0 0 3>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: default-state {
+                    shutter-pins {
+                        groups = "gpio3";
+                        function = "mic-shutter";
+                    };
+                };
+            };
+
+            spi {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                cs-gpios = <&cs42l43_pins 1 0>;
+
+                sensor@0 {
+                    compatible = "bosch,bme680";
+                    reg = <0>;
+                    spi-max-frequency = <1400000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
new file mode 100644
index 0000000000..f7bafbd4f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CS42L51 audio codec
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: cirrus,cs42l51
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: MCLK
+
+  reset-gpios:
+    maxItems: 1
+
+  VL-supply:
+    description: phandle to voltage regulator of digital interface section
+
+  VD-supply:
+    description: phandle to voltage regulator of digital internal section
+
+  VA-supply:
+    description: phandle to voltage regulator of analog internal section
+
+  VAHP-supply:
+    description: phandle to voltage regulator of headphone
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l51@4a {
+        compatible = "cirrus,cs42l51";
+        reg = <0x4a>;
+        #sound-dai-cells = <0>;
+        clocks = <&mclk_prov>;
+        clock-names = "MCLK";
+        VL-supply = <&reg_audio>;
+        VD-supply = <&reg_audio>;
+        VA-supply = <&reg_audio>;
+        VAHP-supply = <&reg_audio>;
+        reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+
+        /* assume audio-graph */
+        port {
+          cpu_endpoint: endpoint {
+            remote-endpoint = <&cpu_endpoint>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
new file mode 100644
index 0000000000..453d493c94
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,ep9301-i2s.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,ep9301-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus EP93xx I2S Controller
+
+description: |
+  The I2S controller is used to stream serial audio data between the external
+  I2S CODECs’, ADCs/DACs, and the ARM Core. The controller supports I2S, Left-
+  and Right-Justified DSP formats.
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: cirrus,ep9301-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: sclk
+      - const: lrclk
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s: i2s@80820000 {
+        compatible = "cirrus,ep9301-i2s";
+        #sound-dai-cells = <0>;
+        reg = <0x80820000 0x100>;
+        interrupt-parent = <&vic1>;
+        interrupts = <28>;
+        clocks = <&syscon 29>,
+                 <&syscon 30>,
+                 <&syscon 31>;
+        clock-names = "mclk", "sclk", "lrclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..52f024f530
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of various
+  application processor systems to provide a full evaluation platform.
+  Audio system topology, clocking and power can all be controlled through
+  the Lochnagar, allowing the device under test to be used in a variety of
+  possible use cases.
+
+  This binding document describes the binding for the audio portion of the
+  driver.
+
+  This binding must be part of the Lochnagar MFD binding:
+    [1] ../mfd/cirrus,lochnagar.yaml
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar2-soundcard
+
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  clocks:
+    description:
+      Master clock source for the sound card, should normally be set to
+      LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar clock driver.
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
new file mode 100644
index 0000000000..014d4eaa87
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  This describes audio configuration bindings for these codecs.
+
+  See also the core bindings for the parent MFD driver:
+
+    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+  and defines for values used in these bindings:
+
+    include/dt-bindings/sound/madera.h
+
+  The properties are all contained in the parent MFD node.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  cirrus,inmode:
+    description:
+      A list of input mode settings for each input. A maximum
+      of 24 cells, with four cells per input in the order INnAL,
+      INnAR INnBL INnBR.  For non-muxed inputs the first two cells
+      for that input set the mode for the left and right channel
+      and the second two cells must be 0.  For muxed inputs the
+      first two cells for that input set the mode of the left and
+      right A inputs and the second two cells set the mode of the
+      left and right B inputs.  Valid mode values are one of the
+      MADERA_INMODE_xxx. If the array is shorter than the number
+      of inputs the unspecified inputs default to MADERA_INMODE_DIFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 24
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  cirrus,out-mono:
+    description:
+      Mono bit for each output, maximum of six cells if the array
+      is shorter outputs will be set to stereo.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  cirrus,dmic-ref:
+    description: |
+      Indicates how the MICBIAS pins have been externally connected
+      to DMICs on each input, one cell per input.
+
+        <IN1 IN2 IN3 ...>
+
+      A value of 0 indicates MICVDD and is the default,
+      other values depend on the codec: For CS47L35 one of the
+      CS47L35_DMIC_REF_xxx values For all other codecs one of
+      the MADERA_DMIC_REF_xxx values Also see the datasheet for a
+      description of the INn_DMIC_SUP field.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 3
+      default: 0
+
+  cirrus,max-channels-clocked:
+    description:
+      Maximum number of channels that I2S clocks will be generated
+      for. Useful when clock master for systems where the I2S bus
+      has multiple data lines.  One cell for each AIF, use a value
+      of zero for AIFs that should be handled normally.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      default: 0
+
+  cirrus,pdm-fmt:
+    description:
+      PDM speaker data format, must contain 2 cells (OUT5 and
+      OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+      description of this value. The second cell is ignored for
+      codecs that do not have OUT6.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  cirrus,pdm-mute:
+    description: |
+      PDM mute format, must contain 2 cells (OUT5 and OUT6). See the
+      PDM_SPKn_CTRL_1 register in the datasheet for a description
+      of this value.  The second cell is ignored for codecs that
+      do not have OUT6.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/component-common.yaml b/Documentation/devicetree/bindings/sound/component-common.yaml
new file mode 100644
index 0000000000..37766c5f39
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/component-common.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/component-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Component Common Properties
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  sound-name-prefix:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Card implementing the routing property define the connection between
+      audio components as list of string pair. Component using the same
+      sink/source names may use this property to prepend the name of their
+      sinks/sources with the provided string.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/cs35l32.txt b/Documentation/devicetree/bindings/sound/cs35l32.txt
new file mode 100644
index 0000000000..1417d3f5cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l32.txt
@@ -0,0 +1,62 @@
+CS35L32 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs35l32"
+
+  - reg : the I2C address of the device for I2C. Address is determined by the level
+  of the AD0 pin. Level 0 is 0x40 while Level 1 is 0x41.
+
+  - VA-supply, VP-supply : power supplies for the device,
+  as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+  deasserted before communication to the codec starts.
+
+  - cirrus,boost-manager : Boost voltage control.
+  0 = Automatically managed.  Boost-converter output voltage is the higher
+  of the two: Class G or adaptive LED voltage.
+  1 = Automatically managed irrespective of audio, adapting for low-power
+  dissipation when LEDs are ON, and operating in Fixed-Boost Bypass Mode
+  if LEDs are OFF (VBST = VP).
+  2 = (Default) Boost voltage fixed in Bypass Mode (VBST = VP).
+  3 = Boost voltage fixed at 5 V.
+
+  - cirrus,sdout-datacfg : Data configuration for dual CS35L32 applications only.
+  Determines the data packed in a two-CS35L32 configuration.
+  0 = Left/right channels VMON[11:0], IMON[11:0], VPMON[7:0].
+  1 = Left/right channels VMON[11:0], IMON[11:0], STATUS.
+  2 = (Default) left/right channels VMON[15:0], IMON [15:0].
+  3 = Left/right channels VPMON[7:0], STATUS.
+
+  - cirrus,sdout-share : SDOUT sharing. Determines whether one or two CS35L32
+  devices are on board sharing SDOUT.
+  0 = (Default) One IC.
+  1 = Two IC's.
+
+  - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP.
+  0 = 3.1V
+  1 = 3.2V
+  2 = 3.3V (Default)
+  3 = 3.4V
+
+  - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
+  0 = 3.1V
+  1 = 3.2V
+  2 = 3.3V
+  3 = 3.4V (Default)
+  4 = 3.5V
+  5 = 3.6V
+
+Example:
+
+codec: codec@40 {
+	compatible = "cirrus,cs35l32";
+	reg = <0x40>;
+	reset-gpios = <&gpio 10 0>;
+	cirrus,boost-manager = <0x03>;
+	cirrus,sdout-datacfg = <0x02>;
+	VA-supply = <&reg_audio>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs35l33.txt b/Documentation/devicetree/bindings/sound/cs35l33.txt
new file mode 100644
index 0000000000..dc5a355d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l33.txt
@@ -0,0 +1,124 @@
+CS35L33 Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l33"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : gpio used to reset the amplifier
+
+ -  interrupts : IRQ line info CS35L33.
+    (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+    for further information relating to interrupt properties)
+
+  - cirrus,boost-ctl : Booster voltage use to supply the amp. If the value is
+    0, then VBST = VP. If greater than 0, the boost voltage will be 3300mV with
+    a value of 1 and will increase at a step size of 100mV until a maximum of
+    8000mV.
+
+  - cirrus,ramp-rate : On power up, it affects the time from when the power
+    up sequence begins to the time the audio reaches a full-scale output.
+    On power down, it affects the time from when the power-down sequence
+    begins to when the amplifier disables the PWM outputs. If this property
+    is not set then soft ramping will be disabled and ramp time would be
+    20ms. If this property is set to 0,1,2,3 then ramp times would be 40ms,
+    60ms,100ms,175ms respectively for 48KHz sample rate.
+
+  - cirrus,boost-ipk : The maximum current allowed for the boost converter.
+    The range starts at 1850000uA and goes to a maximum of 3600000uA
+    with a step size of 15625uA. The default is 2500000uA.
+
+  - cirrus,imon-adc-scale : Configures the scaling of data bits from the IMON
+    ADC data word. This property can be set as a value of 0 for bits 15 down
+    to 0, 6 for 21 down to 6, 7, for 22 down to 7, 8 for 23 down to 8.
+
+
+Optional H/G Algorithm sub-node:
+
+The cs35l33 node can have a single "cirrus,hg-algo" sub-node that will enable
+the internal H/G Algorithm.
+
+  - cirrus,hg-algo : Sub-node for internal Class H/G algorithm that
+    controls the amplifier supplies.
+
+Optional properties for the "cirrus,hg-algo" sub-node:
+
+  - cirrus,mem-depth : Memory depth for the Class H/G algorithm measured in
+    LRCLK cycles. If this property is set to 0, 1, 2, or 3 then the memory
+    depths will be 1, 4, 8, 16 LRCLK cycles.  The default is 16 LRCLK cycles.
+
+    cirrus,release-rate : The number of consecutive LRCLK periods before
+    allowing release condition tracking updates. The number of LRCLK periods
+    start at 3 to a maximum of 255.
+
+  - cirrus,ldo-thld : Configures the signal threshold at which the PWM output
+    stage enters LDO operation. Starts as a default value of 50mV for a value
+    of 1 and increases with a step size of 50mV to a maximum of 750mV (value of
+    0xF).
+
+  - cirrus,ldo-path-disable : This is a boolean property. If present, the H/G
+    algorithm uses the max detection path.  If not present, the LDO
+    detection path is used.
+
+  - cirrus,ldo-entry-delay : The LDO entry delay in milliseconds before the H/G
+    algorithm switches to the LDO voltage.  This property can be set to values
+    from 0 to 7 for delays of 5ms, 10ms, 50ms, 100ms, 200ms, 500ms, 1000ms.
+    The default is 100ms.
+
+  - cirrus,vp-hg-auto : This is a boolean property.  When set, class H/G VPhg
+    automatic updating is enabled.
+
+  - cirrus,vp-hg :  Class H/G algorithm VPhg.  Controls the H/G algorithm's
+    reference to the VP voltage for when to start generating a boosted VBST.
+    The reference voltage starts at 3000mV with a value of 0x3 and is increased
+    by 100mV per step to a maximum of 5500mV.
+
+  - cirrus,vp-hg-rate : The rate (number of LRCLK periods) at which the VPhg is
+    allowed to increase to a higher voltage when using VPhg automatic
+    tracking. This property can be set to values from 0 to 3 with rates of 128
+    periods, 2048 periods, 32768 periods, and 524288 periods.
+    The default is 32768 periods.
+
+  - cirrus,vp-hg-va : VA calculation reference for automatic VPhg tracking
+    using VPMON. This property can be set to values from 0 to 6 starting at
+    1800mV with a step size of 50mV up to a maximum value of 1750mV.
+    Default is 1800mV.
+
+Example:
+
+cs35l33: cs35l33@40 {
+	compatible = "cirrus,cs35l33";
+	reg = <0x40>;
+
+	VA-supply = <&ldo5_reg>;
+	VP-supply = <&ldo5_reg>;
+
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	reset-gpios = <&cs47l91 34 0>;
+
+	cirrus,ramp-rate = <0x0>;
+	cirrus,boost-ctl = <0x30>;  /* VBST = 8000mV */
+	cirrus,boost-ipk = <0xE0>; /* 3600mA */
+	cirrus,imon-adc-scale = <0> /* Bits 15 down to 0 */
+
+	cirrus,hg-algo {
+		cirrus,mem-depth = <0x3>;
+		cirrus,release-rate = <0x3>;
+		cirrus,ldo-thld = <0x1>;
+		cirrus,ldo-path-disable = <0x0>;
+		cirrus,ldo-entry-delay=<0x4>;
+		cirrus,vp-hg-auto;
+		cirrus,vp-hg=<0xF>;
+		cirrus,vp-hg-rate=<0x2>;
+		cirrus,vp-hg-va=<0x0>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/cs35l34.txt b/Documentation/devicetree/bindings/sound/cs35l34.txt
new file mode 100644
index 0000000000..2f7606b7d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l34.txt
@@ -0,0 +1,62 @@
+CS35L34 Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l34"
+
+  - reg : the I2C address of the device for I2C.
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  - cirrus,boost-vtge-millivolt : Boost Voltage Value.  Configures the boost
+    converter's output voltage in mV. The range is from VP to 8V with
+    increments of 100mV.
+
+  - cirrus,boost-nanohenry: Inductor value for boost converter. The value is
+    in nH and they can be values of 1000nH, 1100nH, 1200nH, 1500nH, and 2200nH.
+
+Optional properties:
+
+  - reset-gpios: GPIO used to reset the amplifier.
+
+  - interrupts : IRQ line info CS35L34.
+    (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+    for further information relating to interrupt properties)
+
+  - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The
+    range starts at 1200mA and goes to a maximum of 3840mA with increments of
+    80mA. The default value is 2480mA.
+
+  - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the
+    received mono data is in the left or right portion of the I2S frame
+    according to the AD0 pin or directly via this configuration.
+    0x0 (Default) = Selected by AD0 input (if AD0 = LOW, use left channel),
+    0x2 = Left,
+    0x1 = Selected by the inversion of the AD0 input (if AD0 = LOW, use right
+    channel),
+    0x3 = Right.
+
+  - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take
+    effect without waiting for a zero cross.
+
+  - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of
+    SCLK. Otherwise, data is on the falling edge of SCLK.
+
+
+Example:
+
+cs35l34: cs35l34@40 {
+	compatible = "cirrus,cs35l34";
+	reg = <0x40>;
+
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	reset-gpios = <&gpio 10 0>;
+
+	cirrus,boost-vtge-milltvolt = <8000>; /* 8V */
+	cirrus,boost-ind-nanohenry = <1000>; /* 1uH */
+	cirrus,boost-peak-milliamp = <3000>; /* 3A */
+};
diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt
new file mode 100644
index 0000000000..e84f30c5c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l35.txt
@@ -0,0 +1,181 @@
+CS35L35 Boosted Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l35"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  - interrupts : IRQ line info CS35L35.
+    (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+    for further information relating to interrupt properties)
+
+ - cirrus,boost-ind-nanohenry: Inductor value for boost converter. The value is
+    in nH and they can be values of 1000nH, 1200nH, 1500nH, and 2200nH.
+
+Optional properties:
+  - reset-gpios : gpio used to reset the amplifier
+
+  - cirrus,stereo-config : Boolean to determine if there are 2 AMPs for a
+  Stereo configuration
+
+  - cirrus,audio-channel : Set Location of Audio Signal on Serial Port
+  0 = Data Packet received on Left I2S Channel
+  1 = Data Packet received on Right I2S Channel
+
+  - cirrus,advisory-channel : Set Location of Advisory Signal on Serial Port
+  0 = Data Packet received on Left I2S Channel
+  1 = Data Packet received on Right I2S Channel
+
+  - cirrus,shared-boost : Boolean to enable ClassH tracking of Advisory Signal
+  if 2 Devices share Boost BST_CTL
+
+  - cirrus,external-boost : Boolean to specify the device is using an external
+  boost supply, note that sharing a boost from another cs35l35 would constitute
+  using an external supply for the slave device
+
+  - cirrus,sp-drv-strength : Value for setting the Serial Port drive strength
+  Table 3-10 of the datasheet lists drive-strength specifications
+  0 = 1x (Default)
+  1 = .5x
+  - cirrus,sp-drv-unused : Determines how unused slots should be driven on the
+  Serial Port.
+  0 - Hi-Z
+  2 - Drive 0's (Default)
+  3 - Drive 1's
+
+  - cirrus,bst-pdn-fet-on : Boolean to determine if the Boost PDN control
+  powers down with a rectification FET On or Off. If VSPK is supplied
+  externally then FET is off.
+
+  - cirrus,boost-ctl-millivolt : Boost Voltage Value.  Configures the boost
+    converter's output voltage in mV. The range is from 2600mV to 9000mV with
+    increments of 100mV.
+    (Default) VP
+
+  - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA.
+  Configures the peak current by monitoring the current through the boost FET.
+  Range starts at 1680mA and goes to a maximum of 4480mA with increments of
+  110mA.
+  (Default) 2.46 Amps
+
+  - cirrus,amp-gain-zc : Boolean to determine if to use Amplifier gain-change
+  zero-cross
+
+Optional H/G Algorithm sub-node:
+
+  The cs35l35 node can have a single "cirrus,classh-internal-algo" sub-node
+  that will disable automatic control of the internal H/G Algorithm.
+
+  It is strongly recommended that the Datasheet be referenced when adjusting
+  or using these Class H Algorithm controls over the internal Algorithm.
+  Serious damage can occur to the Device and surrounding components.
+
+  - cirrus,classh-internal-algo : Sub-node for the Internal Class H Algorithm
+  See Section 4.3 Internal Class H Algorithm in the Datasheet.
+  If not used, the device manages the ClassH Algorithm internally.
+
+Optional properties for the "cirrus,classh-internal-algo" Sub-node
+
+  Section 7.29 Class H Control
+  - cirrus,classh-bst-overide : Boolean
+  - cirrus,classh-bst-max-limit
+  - cirrus,classh-mem-depth
+
+  Section 7.30 Class H Headroom Control
+  - cirrus,classh-headroom
+
+  Section 7.31 Class H Release Rate
+  - cirrus,classh-release-rate
+
+  Section 7.32 Class H Weak FET Drive Control
+  - cirrus,classh-wk-fet-disable
+  - cirrus,classh-wk-fet-delay
+  - cirrus,classh-wk-fet-thld
+
+  Section 7.34 Class H VP Control
+  - cirrus,classh-vpch-auto
+  - cirrus,classh-vpch-rate
+  - cirrus,classh-vpch-man
+
+Optional Monitor Signal Format sub-node:
+
+  The cs35l35 node can have a single "cirrus,monitor-signal-format" sub-node
+  for adjusting the Depth, Location and Frame of the Monitoring Signals
+  for Algorithms.
+
+  See Sections 4.8.2 through 4.8.4 Serial-Port Control in the Datasheet
+
+  -cirrus,monitor-signal-format : Sub-node for the Monitor Signaling Formatting
+  on the I2S Port. Each of the 3 8 bit values in the array contain the settings
+  for depth, location, and frame.
+
+  If not used, the defaults for the 6 monitor signals is used.
+
+  Sections 7.44 - 7.53 lists values for the depth, location, and frame
+  for each monitoring signal.
+
+  - cirrus,imon : 4 8 bit values to set the depth, location, frame and ADC
+  scale of the IMON monitor signal.
+
+  - cirrus,vmon : 3 8 bit values to set the depth, location, and frame
+  of the VMON monitor signal.
+
+  - cirrus,vpmon : 3 8 bit values to set the depth, location, and frame
+  of the VPMON monitor signal.
+
+  - cirrus,vbstmon : 3 8 bit values to set the depth, location, and frame
+  of the VBSTMON monitor signal
+
+  - cirrus,vpbrstat : 3 8 bit values to set the depth, location, and frame
+  of the VPBRSTAT monitor signal
+
+  - cirrus,zerofill : 3 8 bit values to set the depth, location, and frame\
+  of the ZEROFILL packet in the monitor signal
+
+Example:
+
+cs35l35: cs35l35@20 {
+	compatible = "cirrus,cs35l35";
+	reg = <0x20>;
+	VA-supply = <&dummy_vreg>;
+	VP-supply = <&dummy_vreg>;
+	reset-gpios = <&axi_gpio 54 0>;
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	cirrus,boost-ctl-millivolt = <9000>;
+
+	cirrus,stereo-config;
+	cirrus,audio-channel = <0x00>;
+	cirrus,advisory-channel = <0x01>;
+	cirrus,shared-boost;
+
+	cirrus,classh-internal-algo {
+		cirrus,classh-bst-overide;
+		cirrus,classh-bst-max-limit = <0x01>;
+		cirrus,classh-mem-depth = <0x01>;
+		cirrus,classh-release-rate = <0x08>;
+		cirrus,classh-headroom-millivolt = <0x0B>;
+		cirrus,classh-wk-fet-disable = <0x01>;
+		cirrus,classh-wk-fet-delay = <0x04>;
+		cirrus,classh-wk-fet-thld = <0x01>;
+		cirrus,classh-vpch-auto = <0x01>;
+		cirrus,classh-vpch-rate = <0x02>;
+		cirrus,classh-vpch-man = <0x05>;
+	};
+
+	/* Depth, Location, Frame */
+	cirrus,monitor-signal-format {
+		cirrus,imon = /bits/ 8 <0x03 0x00 0x01>;
+		cirrus,vmon = /bits/ 8 <0x03 0x00 0x00>;
+		cirrus,vpmon = /bits/ 8 <0x03 0x04 0x00>;
+		cirrus,vbstmon = /bits/ 8 <0x03 0x04 0x01>;
+		cirrus,vpbrstat = /bits/ 8 <0x00 0x04 0x00>;
+		cirrus,zerofill = /bits/ 8 <0x00 0x00 0x00>;
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/sound/cs35l36.txt b/Documentation/devicetree/bindings/sound/cs35l36.txt
new file mode 100644
index 0000000000..d34117b855
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs35l36.txt
@@ -0,0 +1,168 @@
+CS35L36 Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l36"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VP-supply : power supplies for the device,
+  as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  - cirrus,boost-ctl-millivolt : Boost Voltage Value.  Configures the boost
+  converter's output voltage in mV. The range is from 2550mV to 12000mV with
+  increments of 50mV.
+  (Default) VP
+
+  - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA.
+  Configures the peak current by monitoring the current through the boost FET.
+  Range starts at 1600mA and goes to a maximum of 4500mA with increments of
+  50mA.
+  (Default) 4.50 Amps
+
+  - cirrus,boost-ind-nanohenry : Inductor estimation LBST reference value.
+  Seeds the digital boost converter's inductor estimation block with the initial
+  inductance value to reference.
+
+  1000 = 1uH (Default)
+  1200 = 1.2uH
+
+Optional properties:
+  - cirrus,multi-amp-mode : Boolean to determine if there are more than
+  one amplifier in the system. If more than one it is best to Hi-Z the ASP
+  port to prevent bus contention on the output signal
+
+  - cirrus,boost-ctl-select : Boost converter control source selection.
+  Selects the source of the BST_CTL target VBST voltage for the boost
+  converter to generate.
+  0x00 - Control Port Value
+  0x01 - Class H Tracking (Default)
+  0x10 - MultiDevice Sync Value
+
+  - cirrus,amp-pcm-inv : Boolean to determine Amplifier will invert incoming
+  PCM data
+
+  - cirrus,imon-pol-inv : Boolean to determine Amplifier will invert the
+  polarity of outbound IMON feedback data
+
+  - cirrus,vmon-pol-inv : Boolean to determine Amplifier will invert the
+  polarity of outbound VMON feedback data
+
+  - cirrus,dcm-mode-enable : Boost converter automatic DCM Mode enable.
+  This enables the digital boost converter to operate in a low power
+  (Discontinuous Conduction) mode during low loading conditions.
+
+  - cirrus,weak-fet-disable : Boolean : The strength of the output drivers is
+  reduced when operating in a Weak-FET Drive Mode and must not be used to drive
+  a large load.
+
+  - cirrus,classh-wk-fet-delay :  Weak-FET entry delay. Controls the delay
+  (in ms) before the Class H algorithm switches to the weak-FET voltage
+  (after the audio falls and remains below the value specified in WKFET_AMP_THLD).
+
+  0 = 0ms
+  1 = 5ms
+  2 = 10ms
+  3 = 50ms
+  4 = 100ms (Default)
+  5 = 200ms
+  6 = 500ms
+  7 = 1000ms
+
+  - cirrus,classh-weak-fet-thld-millivolt : Weak-FET amplifier drive threshold.
+  Configures the signal threshold at which the PWM output stage enters
+  weak-FET operation. The range is 50mV to 700mV in 50mV increments.
+
+  - cirrus,temp-warn-threshold :  Amplifier overtemperature warning threshold.
+  Configures the threshold at which the overtemperature warning condition occurs.
+  When the threshold is met, the overtemperature warning attenuation is applied
+  and the TEMP_WARN_EINT interrupt status bit is set.
+  If TEMP_WARN_MASK = 0, INTb is asserted.
+
+  0 = 105C
+  1 = 115C
+  2 = 125C (Default)
+  3 = 135C
+
+  - cirrus,irq-drive-select : Selects the driver type of the selected interrupt
+  output.
+
+  0 = Open-drain
+  1 = Push-pull (Default)
+
+  - cirrus,irq-gpio-select : Selects the pin to serve as the programmable
+  interrupt output.
+
+  0 = PDM_DATA / SWIRE_SD / INT (Default)
+  1 = GPIO
+
+Optional properties for the "cirrus,vpbr-config" Sub-node
+
+  - cirrus,vpbr-en : VBST brownout prevention enable. Configures whether the
+  VBST brownout prevention algorithm is enabled or disabled.
+
+  0 = VBST brownout prevention disabled (default)
+  1 = VBST brownout prevention enabled
+
+  See Section 7.31.1 VPBR Config for configuration options & further details
+
+  - cirrus,vpbr-thld : Initial VPBR threshold. Configures the VP brownout
+  threshold voltage
+
+  - cirrus,cirrus,vpbr-atk-rate : Attenuation attack step rate. Configures the
+  amount delay between consecutive volume attenuation steps when a brownout
+  condition is present and the VP brownout condition is in an attacking state.
+
+  - cirrus,vpbr-atk-vol : VP brownout prevention step size. Configures the VP
+  brownout prevention attacking attenuation step size when operating in either
+  digital volume or analog gain modes.
+
+  - cirrus,vpbr-max-attn : Maximum attenuation that the VP brownout prevention
+  can apply to the audio signal.
+
+  - cirrus,vpbr-wait : Configures the delay time between a brownout condition
+  no longer being present and the VP brownout prevention entering an attenuation
+  release state.
+
+  - cirrus,vpbr-rel-rate : Attenuation release step rate. Configures the delay
+  between consecutive volume attenuation release steps when a brownout condition
+  is not longer present and the VP brownout is in an attenuation release state.
+
+  - cirrus,vpbr-mute-en : During the attack state, if the vpbr-max-attn value
+  is reached, the error condition still remains, and this bit is set, the audio
+  is muted.
+
+Example:
+
+cs35l36: cs35l36@40 {
+	compatible = "cirrus,cs35l36";
+	reg = <0x40>;
+	VA-supply = <&dummy_vreg>;
+	VP-supply = <&dummy_vreg>;
+	reset-gpios = <&gpio0 54 0>;
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	cirrus,boost-ind-nanohenry = <1000>;
+	cirrus,boost-ctl-millivolt = <10000>;
+	cirrus,boost-peak-milliamp = <4500>;
+	cirrus,boost-ctl-select = <0x00>;
+	cirrus,weak-fet-delay = <0x04>;
+	cirrus,weak-fet-thld = <0x01>;
+	cirrus,temp-warn-threshold = <0x01>;
+	cirrus,multi-amp-mode;
+	cirrus,irq-drive-select = <0x01>;
+	cirrus,irq-gpio-select = <0x01>;
+
+	cirrus,vpbr-config {
+		cirrus,vpbr-en = <0x00>;
+		cirrus,vpbr-thld = <0x05>;
+		cirrus,vpbr-atk-rate = <0x02>;
+		cirrus,vpbr-atk-vol = <0x01>;
+		cirrus,vpbr-max-attn = <0x09>;
+		cirrus,vpbr-wait = <0x01>;
+		cirrus,vpbr-rel-rate = <0x05>;
+		cirrus,vpbr-mute-en = <0x00>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4265.txt b/Documentation/devicetree/bindings/sound/cs4265.txt
new file mode 100644
index 0000000000..380fff8e4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4265.txt
@@ -0,0 +1,29 @@
+CS4265 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "cirrus,cs4265"
+
+  - reg : the I2C address of the device for I2C. The I2C address depends on
+          the state of the AD0 pin.  If AD0 is high, the i2c address is 0x4f.
+          If it is low, the i2c address is 0x4e.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+Examples:
+
+codec_ad0_high: cs4265@4f { /* AD0 Pin is high */
+	compatible = "cirrus,cs4265";
+	reg = <0x4f>;
+};
+
+
+codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
+	compatible = "cirrus,cs4265";
+	reg = <0x4e>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt
new file mode 100644
index 0000000000..c33770ec4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4270.txt
@@ -0,0 +1,21 @@
+CS4270 audio CODEC
+
+The driver for this device currently only supports I2C.
+
+Required properties:
+
+  - compatible : "cirrus,cs4270"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		  deasserted before communication to the codec starts.
+
+Example:
+
+codec: cs4270@48 {
+	compatible = "cirrus,cs4270";
+	reg = <0x48>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt
new file mode 100644
index 0000000000..6e699ceaba
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4271.txt
@@ -0,0 +1,57 @@
+Cirrus Logic CS4271 DT bindings
+
+This driver supports both the I2C and the SPI bus.
+
+Required properties:
+
+ - compatible: "cirrus,cs4271"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: the i2c address
+
+
+Optional properties:
+
+ - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
+		!RESET pin
+ - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
+				is enabled.
+ - cirrus,enable-soft-reset:
+	The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+	line is de-asserted. That also means that clocks cannot be changed
+	without putting the chip back into hardware reset, which also requires
+	a complete re-initialization of all registers.
+
+	One (undocumented) workaround is to assert and de-assert the PDN bit
+	in the MODE2 register. This workaround can be enabled with this DT
+	property.
+
+	Note that this is not needed in case the clocks are stable
+	throughout the entire runtime of the codec.
+
+ - vd-supply:	Digital power
+ - vl-supply:	Logic power
+ - va-supply:	Analog Power
+
+Examples:
+
+	codec_i2c: cs4271@10 {
+		compatible = "cirrus,cs4271";
+		reg = <0x10>;
+		reset-gpio = <&gpio 23 0>;
+		vd-supply = <&vdd_3v3_reg>;
+		vl-supply = <&vdd_3v3_reg>;
+		va-supply = <&vdd_3v3_reg>;
+	};
+
+	codec_spi: cs4271@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0x0>;
+		reset-gpio = <&gpio 23 0>;
+		spi-max-frequency = <6000000>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt
new file mode 100644
index 0000000000..bc03c9312a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l52.txt
@@ -0,0 +1,46 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l52"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - cirrus,reset-gpio : GPIO controller's phandle and the number
+  of the GPIO used to reset the codec.
+
+  - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+  Allowable values of 0x00 through 0x0F. These are raw values written to the
+  register, not the actual frequency. The frequency is determined by the following.
+  Frequency = (64xFs)/(N+2)
+  N = chgfreq_val
+  Fs = Sample Rate (variable)
+
+  - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
+  as a differential input. If not present then the MICA input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
+  as a differential input. If not present then the MICB input is configured as
+  Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+  - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
+  0 = 0.5 x VA
+  1 = 0.6 x VA
+  2 = 0.7 x VA
+  3 = 0.8 x VA
+  4 = 0.83 x VA
+  5 = 0.91 x VA
+
+Example:
+
+codec: codec@4a {
+	compatible = "cirrus,cs42l52";
+	reg = <0x4a>;
+	reset-gpio = <&gpio 10 0>;
+	cirrus,chgfreq-divisor = <0x05>;
+	cirrus.mica-differential-cfg;
+	cirrus,micbias-lvl = <5>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt
new file mode 100644
index 0000000000..4ba520a28a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l56.txt
@@ -0,0 +1,63 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l56"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VCP-supply, VLDO-supply : power supplies for the device,
+  as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - cirrus,gpio-nreset : GPIO controller's phandle and the number
+  of the GPIO used to reset the codec.
+
+  - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+  Allowable values of 0x00 through 0x0F. These are raw values written to the
+  register, not the actual frequency. The frequency is determined by the following.
+  Frequency = MCLK / 4 * (N+2)
+  N = chgfreq_val
+  MCLK = Where MCLK is the frequency of the mclk signal after the MCLKDIV2 circuit.
+
+  - cirrus,ain1a-ref-cfg, ain1b-ref-cfg : boolean, If present, AIN1A or AIN1B are configured
+  as a pseudo-differential input referenced to AIN1REF/AIN3A.
+
+  - cirrus,ain2a-ref-cfg, ain2b-ref-cfg : boolean, If present, AIN2A or AIN2B are configured
+  as a pseudo-differential input referenced to AIN2REF/AIN3B.
+
+  - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin.
+  0 = 0.5 x VA
+  1 = 0.6 x VA
+  2 = 0.7 x VA
+  3 = 0.8 x VA
+  4 = 0.83 x VA
+  5 = 0.91 x VA
+
+  - cirrus,adaptive-pwr-cfg : Configures how the power to the Headphone and Lineout
+  Amplifiers adapt to the output signal levels.
+  0 = Adapt to Volume Mode. Voltage level determined by the sum of the relevant volume settings.
+  1 = Fixed - Headphone and Line Amp supply = + or - VCP/2.
+  2 = Fixed - Headphone and Line Amp supply = + or - VCP.
+  3 = Adapted to Signal; Voltage level is dynamically determined by the output signal.
+
+  - cirrus,hpf-left-freq, hpf-right-freq : Sets the corner frequency (-3dB point) for the internal High-Pass
+  Filter.
+  0 = 1.8Hz
+  1 = 119Hz
+  2 = 236Hz
+  3 = 464Hz
+
+
+Example:
+
+codec: codec@4b {
+	compatible = "cirrus,cs42l56";
+	reg = <0x4b>;
+	cirrus,gpio-nreset = <&gpio 10 0>;
+	cirrus,chgfreq-divisor = <0x05>;
+	cirrus.ain1_ref_cfg;
+	cirrus,micbias-lvl = <5>;
+	VA-supply = <&reg_audio>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l73.txt b/Documentation/devicetree/bindings/sound/cs42l73.txt
new file mode 100644
index 0000000000..47b868b5ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l73.txt
@@ -0,0 +1,22 @@
+CS42L73 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l73"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset_gpio : a GPIO spec for the reset pin.
+  - chgfreq    : Charge Pump Frequency values 0x00-0x0F
+
+
+Example:
+
+codec: cs42l73@4a {
+	compatible = "cirrus,cs42l73";
+	reg = <0x4a>;
+	reset_gpio = <&gpio 10 0>;
+	chgfreq = <0x05>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42xx8.txt b/Documentation/devicetree/bindings/sound/cs42xx8.txt
new file mode 100644
index 0000000000..bbfe39347c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42xx8.txt
@@ -0,0 +1,34 @@
+CS42448/CS42888 audio CODEC
+
+Required properties:
+
+  - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888"
+
+  - reg : the I2C address of the device for I2C
+
+  - clocks : a list of phandles + clock-specifiers, one for each entry in
+    clock-names
+
+  - clock-names : must contain "mclk"
+
+  - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec to define which pin is connected to the chip's
+    !RESET pin
+
+Example:
+
+cs42888: codec@48 {
+	compatible = "cirrus,cs42888";
+	reg = <0x48>;
+	clocks = <&codec_mclk 0>;
+	clock-names = "mclk";
+	VA-supply = <&reg_audio>;
+	VD-supply = <&reg_audio>;
+	VLS-supply = <&reg_audio>;
+	VLC-supply = <&reg_audio>;
+	reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs43130.txt b/Documentation/devicetree/bindings/sound/cs43130.txt
new file mode 100644
index 0000000000..8b1dd5aeb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs43130.txt
@@ -0,0 +1,67 @@
+CS43130 DAC
+
+Required properties:
+
+  - compatible : "cirrus,cs43130", "cirrus,cs4399", "cirrus,cs43131",
+                 "cirrus,cs43198"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VP-supply, VL-supply, VCP-supply, VD-supply:
+	power supplies for the device, as covered in
+	Documentation/devicetree/bindings/regulator/regulator.txt.
+
+
+Optional properties:
+
+  - reset-gpios : Active low GPIO used to reset the device
+
+  - cirrus,xtal-ibias:
+   When external MCLK is generated by external crystal
+   oscillator, CS43130 can be used to provide bias current
+   for external crystal.  Amount of bias current sent is
+   set as:
+   1 = 7.5uA
+   2 = 12.5uA
+   3 = 15uA
+
+  - cirrus,dc-measure:
+   Boolean, define to enable headphone DC impedance measurement.
+
+  - cirrus,ac-measure:
+   Boolean, define to enable headphone AC impedance measurement.
+   DC impedance must also be enabled for AC impedance measurement.
+
+  - cirrus,dc-threshold:
+   Define 2 DC impedance thresholds in ohms for HP output control.
+   Default values are 50 and 120 Ohms.
+
+  - cirrus,ac-freq:
+   Define the frequencies at which to measure HP AC impedance.
+   Only used if "cirrus,dc-measure" is defined.
+   Exactly 10 frequencies must be defined.
+   If this properties is undefined, by default,
+   following frequencies are used:
+   <24 43 93 200 431 928 2000 4309 9283 20000>
+   The above frequencies are logarithmically equally spaced.
+   Log base is 10.
+
+Example:
+
+cs43130: audio-codec@30 {
+   compatible = "cirrus,cs43130";
+   reg = <0x30>;
+   reset-gpios = <&axi_gpio 54 0>;
+   VA-supply = <&dummy_vreg>;
+   VP-supply = <&dummy_vreg>;
+   VL-supply = <&dummy_vreg>;
+   VCP-supply = <&dummy_vreg>;
+   VD-supply = <&dummy_vreg>;
+   cirrus,xtal-ibias = <2>;
+   interrupt-parent = <&gpio0>;
+   interrupts = <55 8>;
+   cirrus,dc-measure;
+   cirrus,ac-measure;
+   cirrus,dc-threshold = /bits/ 16 <20 100>;
+   cirrus,ac-freq = /bits/ 16 <24 43 93 200 431 928 2000 4309 9283 20000>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4341.txt b/Documentation/devicetree/bindings/sound/cs4341.txt
new file mode 100644
index 0000000000..12b4aa8ef0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4341.txt
@@ -0,0 +1,22 @@
+Cirrus Logic CS4341 audio DAC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+  - compatible: "cirrus,cs4341a"
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+For required properties on I2C-bus, please consult
+Documentation/devicetree/bindings/i2c/i2c.txt
+For required properties on SPI-bus, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+	codec: cs4341@0 {
+		#sound-dai-cells = <0>;
+		compatible = "cirrus,cs4341a";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt
new file mode 100644
index 0000000000..54c117b59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4349.txt
@@ -0,0 +1,19 @@
+CS4349 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs4349"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin.
+
+Example:
+
+codec: cs4349@48 {
+        compatible = "cirrus,cs4349";
+        reg = <0x48>;
+        reset-gpios = <&gpio 54 0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt
new file mode 100644
index 0000000000..dc256adb35
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs53l30.txt
@@ -0,0 +1,44 @@
+CS53L30 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs53l30"
+
+  - reg : the I2C address of the device
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin.
+
+  - mute-gpios : a GPIO spec for the MUTE pin. The active state can be either
+		 GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW, which would be handled
+		 by the driver automatically.
+
+  - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin.
+			 0 = Hi-Z
+			 1 = 1.80 V
+			 2 = 2.75 V
+
+  - cirrus,use-sdout2 : This is a boolean property. If present, it indicates
+			the hardware design connects both SDOUT1 and SDOUT2
+			pins to output data. Otherwise, it indicates that
+			only SDOUT1 is connected for data output.
+			* CS53l30 supports 4-channel data output in the same
+			* frame using two different ways:
+			* 1) Normal I2S mode on two data pins -- each SDOUT
+			*    carries 2-channel data in the same time.
+			* 2) TDM mode on one single data pin -- SDOUT1 carries
+			*    4-channel data per frame.
+
+Example:
+
+codec: cs53l30@48 {
+	compatible = "cirrus,cs53l30";
+	reg = <0x48>;
+	reset-gpios = <&gpio 54 0>;
+	VA-supply = <&cs53l30_va>;
+	VP-supply = <&cs53l30_vp>;
+};
diff --git a/Documentation/devicetree/bindings/sound/da7213.txt b/Documentation/devicetree/bindings/sound/da7213.txt
new file mode 100644
index 0000000000..94584c96c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/da7213.txt
@@ -0,0 +1,45 @@
+Dialog Semiconductor DA7212/DA7213 Audio Codec bindings
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da7212" or "dlg,da7213"
+- reg: Specifies the I2C slave address
+
+Optional properties:
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- dlg,micbias1-lvl : Voltage (mV) for Mic Bias 1
+	[<1600>, <2200>, <2500>, <3000>]
+- dlg,micbias2-lvl : Voltage (mV) for Mic Bias 2
+	[<1600>, <2200>, <2500>, <3000>]
+- dlg,dmic-data-sel : DMIC channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic-samplephase : When to sample audio from DMIC.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic-clkrate : DMIC clock frequency (Hz).
+	[<1500000>, <3000000>]
+
+ - VDDA-supply : Regulator phandle for Analogue power supply
+ - VDDMIC-supply : Regulator phandle for Mic Bias
+ - VDDIO-supply : Regulator phandle for I/O power supply
+
+======
+
+Example:
+
+	codec_i2c: da7213@1a {
+		compatible = "dlg,da7213";
+ 		reg = <0x1a>;
+
+ 		clocks = <&clks 201>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl = <2500>;
+		dlg,micbias2-lvl = <2500>;
+
+		dlg,dmic-data-sel = "lrise_rfall";
+		dlg,dmic-samplephase = "between_clkedge";
+		dlg,dmic-clkrate = <3000000>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt
new file mode 100644
index 0000000000..2cf30899bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/da7218.txt
@@ -0,0 +1,102 @@
+Dialog Semiconductor DA7218 Audio Codec bindings
+
+DA7218 is an audio codec with HP detect feature.
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da7217" or "dlg,da7218"
+- reg: Specifies the I2C slave address
+
+- VDD-supply: VDD power supply for the device
+- VDDMIC-supply: VDDMIC power supply for the device
+- VDDIO-supply: VDDIO power supply for the device
+  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
+   information relating to regulators)
+
+Optional properties:
+- interrupts: IRQ line info for DA7218 chip.
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+   further information relating to interrupt properties)
+- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
+  interrupt is to be used to wake system, otherwise "irq" should be used.
+- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- dlg,micbias1-lvl-millivolt : Voltage (mV) for Mic Bias 1
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,micbias2-lvl-millivolt : Voltage (mV) for Mic Bias 2
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,mic1-amp-in-sel : Mic1 input source type
+	["diff", "se_p", "se_n"]
+- dlg,mic2-amp-in-sel : Mic2 input source type
+	["diff", "se_p", "se_n"]
+- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic1-samplephase : When to sample audio from DMIC1.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic1-clkrate-hz : DMic1 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,dmic2-data-sel : DMic2 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic2-samplephase : When to sample audio from DMic2.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic2-clkrate-hz : DMic2 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP
+			      (DA7217 only)
+
+======
+
+Optional Child node - 'da7218_hpldet' (DA7218 only):
+
+Optional properties:
+- dlg,jack-rate-us : Time between jack detect measurements (us)
+	[<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>]
+- dlg,jack-debounce : Number of debounce measurements taken for jack detect
+	[<0>, <2>, <3>, <4>]
+- dlg,jack-threshold-pct : Threshold level for jack detection (% of VDD)
+	[<84>, <88>, <92>, <96>]
+- dlg,comp-inv : Boolean flag, invert comparator output
+- dlg,hyst : Boolean flag, enable hysteresis
+- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal
+
+======
+
+Example:
+
+	codec: da7218@1a {
+		compatible = "dlg,da7218";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+
+		VDD-supply = <&reg_audio>;
+		VDDMIC-supply = <&reg_audio>;
+		VDDIO-supply = <&reg_audio>;
+
+		clocks = <&clks 201>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl-millivolt = <2600>;
+		dlg,micbias2-lvl-millivolt = <2600>;
+		dlg,mic1-amp-in-sel = "diff";
+		dlg,mic2-amp-in-sel = "diff";
+
+		dlg,dmic1-data-sel = "lrise_rfall";
+		dlg,dmic1-samplephase = "on_clkedge";
+		dlg,dmic1-clkrate-hz = <3000000>;
+		dlg,dmic2-data-sel = "lrise_rfall";
+		dlg,dmic2-samplephase = "on_clkedge";
+		dlg,dmic2-clkrate-hz = <3000000>;
+
+		da7218_hpldet {
+			dlg,jack-rate-us = <40>;
+			dlg,jack-debounce = <2>;
+			dlg,jack-threshold-pct = <84>;
+			dlg,hyst;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/da9055.txt b/Documentation/devicetree/bindings/sound/da9055.txt
new file mode 100644
index 0000000000..75c6338b6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/da9055.txt
@@ -0,0 +1,22 @@
+* Dialog DA9055 Audio CODEC
+
+DA9055 provides Audio CODEC support (I2C only).
+
+The Audio CODEC device in DA9055 has its own I2C address which is configurable,
+so the device is instantiated separately from the PMIC (MFD) device.
+
+For details on accompanying PMIC I2C device, see the following:
+Documentation/devicetree/bindings/mfd/da9055.txt
+
+Required properties:
+
+  - compatible: "dlg,da9055-codec"
+  - reg: Specifies the I2C slave address
+
+
+Example:
+
+	codec: da9055-codec@1a {
+		compatible = "dlg,da9055-codec";
+		reg = <0x1a>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/dai-common.yaml b/Documentation/devicetree/bindings/sound/dai-common.yaml
new file mode 100644
index 0000000000..1aed2f0f17
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dai-common.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dai-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface Common Properties
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: component-common.yaml#
+
+properties:
+  '#sound-dai-cells': true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/dai-params.yaml b/Documentation/devicetree/bindings/sound/dai-params.yaml
new file mode 100644
index 0000000000..f5fb71f9b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dai-params.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dai-params.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface (DAI) Stream Parameters
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+select: false
+
+$defs:
+
+  dai-channels:
+    description: Number of audio channels used by DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+
+  dai-sample-format:
+    description: Audio sample format used by DAI
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - s8
+      - s16_le
+      - s24_le
+      - s24_3le
+      - s32_le
+
+  dai-sample-rate:
+    description: Audio sample rate used by DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8000
+    maximum: 192000
+
+properties: {}
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/davinci-evm-audio.txt b/Documentation/devicetree/bindings/sound/davinci-evm-audio.txt
new file mode 100644
index 0000000000..963e100514
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-evm-audio.txt
@@ -0,0 +1,49 @@
+* Texas Instruments SoC audio setups with TLV320AIC3X Codec
+
+Required properties:
+- compatible : "ti,da830-evm-audio" : forDM365/DA8xx/OMAPL1x/AM33xx
+- ti,model : The user-visible name of this sound complex.
+- ti,audio-codec : The phandle of the TLV320AIC3x audio codec
+- ti,mcasp-controller : The phandle of the McASP controller
+- ti,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the codec's pins, and the jacks on the board:
+
+Optional properties:
+- ti,codec-clock-rate : The Codec Clock rate (in Hz) applied to the Codec.
+- clocks : Reference to the master clock
+- clock-names : The clock should be named "mclk"
+- Either codec-clock-rate or the codec-clock reference has to be defined. If
+  the both are defined the driver attempts to set referenced clock to the
+  defined rate and takes the rate from the clock reference.
+
+  Board connectors:
+
+  * Headphone Jack
+  * Line Out
+  * Mic Jack
+  * Line In
+
+
+Example:
+
+sound {
+	compatible = "ti,da830-evm-audio";
+	ti,model = "DA830 EVM";
+	ti,audio-codec = <&tlv320aic3x>;
+	ti,mcasp-controller = <&mcasp1>;
+	ti,codec-clock-rate = <12000000>;
+	ti,audio-routing =
+		"Headphone Jack",       "HPLOUT",
+		"Headphone Jack",       "HPROUT",
+		"Line Out",             "LLOUT",
+		"Line Out",             "RLOUT",
+		"MIC3L",                "Mic Bias 2V",
+		"MIC3R",                "Mic Bias 2V",
+		"Mic Bias 2V",          "Mic Jack",
+		"LINE1L",               "Line In",
+		"LINE2L",               "Line In",
+		"LINE1R",               "Line In",
+		"LINE2R",               "Line In";
+};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
new file mode 100644
index 0000000000..7735e08d35
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: McASP Controller for TI SoCs
+
+maintainers:
+  - Jayesh Choudhary <j-choudhary@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dm646x-mcasp-audio
+      - ti,da830-mcasp-audio
+      - ti,am33xx-mcasp-audio
+      - ti,dra7-mcasp-audio
+      - ti,omap4-mcasp-audio
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG registers
+      - description: data registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mpu
+      - const: dat
+
+  op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: 0 - I2S or 1 - DIT operation mode
+    enum:
+      - 0
+      - 1
+
+  tdm-slots:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number of channels over one serializer
+      the property is ignored in DIT mode
+    minimum: 2
+    maximum: 32
+
+  serial-dir:
+    description:
+      A list of serializer configuration
+      Entry is indication for serializer pin direction
+      0 - Inactive, 1 - TX, 2 - RX
+      All AXR pins should be present in the array even if inactive
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 25
+    items:
+      minimum: 0
+      maximum: 2
+
+  dmas:
+    minItems: 1
+    items:
+      - description: transmission DMA channel
+      - description: reception DMA channel
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Name of hwmod associated with McASP
+    maxItems: 1
+    deprecated: true
+
+  tx-num-evt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      configures WFIFO threshold
+      0 disables the FIFO use
+      if property is missing, then also FIFO use is disabled
+
+  rx-num-evt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      configures RFIFO threshold
+      0 disables the FIFO use
+      if property is missing, then also FIFO use is disabled
+
+  dismod:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      specify the drive on TX pin during inactive time slots
+      0 - 3-state, 2 - logic low, 3 - logic high
+    enum:
+      - 0
+      - 2
+      - 3
+    default: 2
+
+  interrupts:
+    anyOf:
+      - minItems: 1
+        items:
+          - description: TX interrupt
+          - description: RX interrupt
+      - items:
+          - description: common/combined interrupt
+
+  interrupt-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: tx
+          - const: rx
+      - const: common
+
+  fck_parent:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: parent clock name for McASP fck
+    maxItems: 1
+
+  auxclk-fs-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: ratio of AUCLK and FS rate if applicable
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  clocks:
+    minItems: 1
+    items:
+      - description: functional clock
+      - description: module specific optional ahclkx clock
+      - description: module specific optional ahclkr clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: ahclkx
+      - const: ahclkr
+
+  power-domains:
+    description: phandle to the corresponding power-domain
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  port:
+    description: connection for when McASP is used via graph card
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - dmas
+  - dma-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        opmode:
+          enum:
+            - 0
+
+    then:
+      required:
+        - tdm-slots
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mcasp0: mcasp0@1d00000 {
+      compatible = "ti,da830-mcasp-audio";
+      reg = <0x100000 0x3000>;
+      reg-names = "mpu";
+      interrupts = <82>, <83>;
+      interrupt-names = "tx", "rx";
+      op-mode = <0>;		/* MCASP_IIS_MODE */
+      tdm-slots = <2>;
+      dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+      dma-names = "tx", "rx";
+      serial-dir = <
+          0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+          0 0 0 0
+          0 0 0 1
+          2 0 0 0 >;
+      tx-num-evt = <1>;
+      rx-num-evt = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
new file mode 100644
index 0000000000..3ffc2562fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
@@ -0,0 +1,50 @@
+Texas Instruments DaVinci McBSP module
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
+audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
+
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+- compatible :
+        "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
+
+- reg : physical base address and length of the controller memory mapped
+        region(s).
+- reg-names : Should contain:
+        * "mpu" for the main registers (required).
+        * "dat" for the data FIFO (optional).
+
+- dmas: three element list of DMA controller phandles, DMA request line and
+	TC channel ordered triplets.
+- dma-names: identifier string for each DMA request line in the dmas property.
+	These strings correspond 1:1 with the ordered pairs in dmas. The dma
+	identifiers must be "rx" and "tx".
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+- interrupts : Interrupt numbers for McBSP
+- interrupt-names : Known interrupt names are "rx" and "tx"
+
+- pinctrl-0: Should specify pin control group used for this controller.
+- pinctrl-names: Should contain only one value - "default", for more details
+        please refer to pinctrl-bindings.txt
+
+Example (AM1808):
+~~~~~~~~~~~~~~~~~
+
+mcbsp0: mcbsp@1d10000 {
+	compatible = "ti,da850-mcbsp";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp0_pins>;
+
+	reg = 	<0x00110000 0x1000>,
+		<0x00310000 0x1000>;
+	reg-names = "mpu", "dat";
+	interrupts = <97 98>;
+	interrupt-names = "rx", "tx";
+	dmas = <&edma0 3 1
+		&edma0 2 1>;
+	dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/sound/dialog,da7219.yaml b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
new file mode 100644
index 0000000000..eb7d219e2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dialog,da7219.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7219 Audio Codec
+
+maintainers:
+  - David Rau <David.Rau.opensource@dm.renesas.com>
+
+description:
+  The DA7219 is an ultra low-power audio codec with
+  in-built advanced accessory detection (AAD) for mobile
+  computing and accessory applications, which supports
+  sample rates up to 96 kHz at 24-bit resolution.
+
+properties:
+  compatible:
+    const: dlg,da7219
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  VDD-supply:
+    description:
+      VDD power supply for the device.
+
+  VDDMIC-supply:
+    description:
+      VDDMIC power supply for the device.
+
+  VDDIO-supply:
+    description:
+      VDDIO power supply for the device.
+
+  interrupt-names:
+    description:
+      Should be "wakeup" if interrupt is to be used to wake system,
+      otherwise "irq" should be used.
+    enum:
+      - wakeup
+      - irq
+
+  wakeup-source:
+    type: boolean
+    description:
+      Flag to indicate this device can wake system (suspend/resume).
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description:
+      Name given for DAI WCLK and BCLK outputs.
+
+  clocks:
+    maxItems: 1
+    description:
+      phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    const: mclk
+
+  dlg,micbias-lvl:
+    enum: [1600, 1800, 2000, 2200, 2400, 2600]
+    description:
+      Voltage (mV) for Mic Bias.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dlg,mic-amp-in-sel:
+    enum: [diff, se_p, se_n]
+    description:
+      Mic input source type.
+
+      diff - Differential.
+
+      se_p - MIC_P.
+      Positive differential analog microphone input.
+
+      se_n - MIC_N.
+      Negative differential analog microphone input.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  da7219_aad:
+    type: object
+    description:
+      Configuration of advanced accessory detection.
+    properties:
+      dlg,micbias-pulse-lvl:
+        enum: [2800, 2900]
+        description:
+          Mic bias higher voltage pulse level (mV).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,micbias-pulse-time:
+        description:
+          Mic bias higher voltage pulse duration (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+
+      dlg,btn-cfg:
+        enum: [2, 5, 10, 50, 100, 200, 500]
+        description:
+          Periodic button press measurements for 4-pole jack (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,mic-det-thr:
+        enum: [200, 500, 750, 1000]
+        description:
+          Impedance threshold for mic detection measurement (Ohms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-deb:
+        enum: [5, 10, 20, 50, 100, 200, 500, 1000]
+        description:
+          Debounce time for jack insertion (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-det-pty:
+        enum: [low, high]
+        description:
+          Polarity for jack insertion detection.
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-det-rate:
+        enum: ["32_64", "64_128", "128_256", "256_512"]
+        description:
+          Jack type (3/4 pole) detection latency (ms).
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-rem-deb:
+        enum: [1, 5, 10, 20]
+        description:
+          Debounce time for jack removal (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,a-d-btn-thr:
+        description:
+          Impedance threshold between buttons A and D.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,d-b-btn-thr:
+        description:
+          Impedance threshold between buttons D and B.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,b-c-btn-thr:
+        description:
+          Impedance threshold between buttons B and C.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,c-mic-btn-thr:
+        description:
+          Impedance threshold between button C and Mic.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,btn-avg:
+        enum: [1, 2, 4, 8]
+        description:
+          Number of 8-bit readings for averaged button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,adc-1bit-rpt:
+        enum: [1, 2, 4, 8]
+        description:
+          Repeat count for 1-bit button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - VDD-supply
+  - VDDMIC-supply
+  - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec: da7219@1a {
+          compatible = "dlg,da7219";
+          reg = <0x1a>;
+
+          interrupt-parent = <&gpio6>;
+          interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+          VDD-supply = <&vdd_reg>;
+          VDDMIC-supply = <&vddmic_reg>;
+          VDDIO-supply = <&vddio_reg>;
+
+          #clock-cells = <1>;
+          clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk";
+
+          clocks = <&clks 201>;
+          clock-names = "mclk";
+
+          dlg,micbias-lvl = <2600>;
+          dlg,mic-amp-in-sel = "diff";
+
+          da7219_aad {
+              dlg,btn-cfg = <50>;
+              dlg,mic-det-thr = <500>;
+              dlg,jack-ins-deb = <20>;
+              dlg,jack-ins-det-pty = "low";
+              dlg,jack-det-rate = "32_64";
+              dlg,jack-rem-deb = <1>;
+
+              dlg,a-d-btn-thr = <0xa>;
+              dlg,d-b-btn-thr = <0x16>;
+              dlg,b-c-btn-thr = <0x21>;
+              dlg,c-mic-btn-thr = <0x3E>;
+
+              dlg,btn-avg = <4>;
+              dlg,adc-1bit-rpt = <1>;
+          };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/dmic-codec.yaml b/Documentation/devicetree/bindings/sound/dmic-codec.yaml
new file mode 100644
index 0000000000..59ef0cf6b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dmic-codec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dmic-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PDM Digital microphone (DMIC) codec
+
+maintainers:
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: dmic-codec
+
+  '#sound-dai-cells':
+    const: 0
+
+  dmicen-gpios:
+    description: GPIO specifier for DMIC to control start and stop
+    maxItems: 1
+
+  num-channels:
+    description: Number of microphones on this DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    default: 8
+
+  modeswitch-delay-ms:
+    description: Delay (in ms) to complete DMIC mode switch
+
+  wakeup-delay-ms:
+    description: Delay (in ms) after enabling the DMIC
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dmic {
+        compatible = "dmic-codec";
+        dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+        num-channels = <1>;
+        wakeup-delay-ms = <50>;
+        modeswitch-delay-ms = <35>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt
new file mode 100644
index 0000000000..33fbf058c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/es8328.txt
@@ -0,0 +1,38 @@
+Everest ES8328 audio CODEC
+
+This device supports both I2C and SPI.
+
+Required properties:
+
+  - compatible  : Should be "everest,es8328" or "everest,es8388"
+  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
+  - AVDD-supply : Regulator providing analog supply voltage 3.3V
+  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
+  - IPVDD-supply : Regulator providing analog output voltage 3.3V
+  - clocks : A 22.5792 or 11.2896 MHz clock
+  - reg : the I2C address of the device for I2C, the chip select number for SPI
+
+Pins on the device (for linking into audio routes):
+
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+
+Example:
+
+codec: es8328@11 {
+	compatible = "everest,es8328";
+	DVDD-supply = <&reg_3p3v>;
+	AVDD-supply = <&reg_3p3v>;
+	PVDD-supply = <&reg_3p3v>;
+	HPVDD-supply = <&reg_3p3v>;
+	clocks = <&clks 169>;
+	reg = <0x11>;
+};
diff --git a/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt
new file mode 100644
index 0000000000..6dfa88c4dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt
@@ -0,0 +1,26 @@
+Audio complex for Eukrea boards with tlv320aic23 codec.
+
+Required properties:
+
+  - compatible		: "eukrea,asoc-tlv320"
+
+  - eukrea,model	: The user-visible name of this sound complex.
+
+  - ssi-controller	: The phandle of the SSI controller.
+
+  - fsl,mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX).
+
+  - fsl,mux-ext-port	: The external port of the i.MX audio muxer.
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/everest,es7134.txt b/Documentation/devicetree/bindings/sound/everest,es7134.txt
new file mode 100644
index 0000000000..091666069b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es7134.txt
@@ -0,0 +1,15 @@
+ES7134 i2s DA converter
+
+Required properties:
+- compatible : "everest,es7134" or
+               "everest,es7144" or
+	       "everest,es7154"
+- VDD-supply : regulator phandle for the VDD supply
+- PVDD-supply: regulator phandle for the PVDD supply for the es7154
+
+Example:
+
+i2s_codec: external-codec {
+	compatible = "everest,es7134";
+	VDD-supply = <&vcc_5v>;
+};
diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.txt b/Documentation/devicetree/bindings/sound/everest,es7241.txt
new file mode 100644
index 0000000000..28f82cf495
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es7241.txt
@@ -0,0 +1,28 @@
+ES7241 i2s AD converter
+
+Required properties:
+- compatible : "everest,es7241"
+- VDDP-supply: regulator phandle for the VDDA supply
+- VDDA-supply: regulator phandle for the VDDP supply
+- VDDD-supply: regulator phandle for the VDDD supply
+
+Optional properties:
+- reset-gpios: gpio connected to the reset pin
+- m0-gpios   : gpio connected to the m0 pin
+- m1-gpios   : gpio connected to the m1 pin
+- everest,sdout-pull-down:
+   Format used by the serial interface is controlled by pulling
+   the sdout. If the sdout is pulled down, leftj format is used.
+   If this property is not provided, sdout is assumed to pulled
+   up and i2s format is used
+
+Example:
+
+linein: audio-codec@2 {
+	#sound-dai-cells = <0>;
+	compatible = "everest,es7241";
+	VDDA-supply = <&vcc_3v3>;
+	VDDP-supply = <&vcc_3v3>;
+	VDDD-supply = <&vcc_3v3>;
+	reset-gpios = <&gpio GPIOH_42>;
+};
diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.yaml b/Documentation/devicetree/bindings/sound/everest,es8316.yaml
new file mode 100644
index 0000000000..b6079b3c44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8316.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8316.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8316 audio CODEC
+
+maintainers:
+  - Daniel Drake <drake@endlessm.com>
+  - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: everest,es8316
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8316: codec@11 {
+        compatible = "everest,es8316";
+        reg = <0x11>;
+        clocks = <&clks 10>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
new file mode 100644
index 0000000000..07781408e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8326 audio CODEC
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    const: everest,es8326
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+  everest,jack-pol:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      just the value of reg 57. Bit(3) decides whether the jack polarity is inverted.
+      Bit(2) decides whether the button on the headset is inverted.
+      Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto.
+    minimum: 0x00
+    maximum: 0x0f
+    default: 0x0f
+
+  everest,mic1-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      the value of reg 2A when headset plugged.
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x22
+
+  everest,mic2-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      the value of reg 2A when headset unplugged.
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x44
+
+  everest,jack-detect-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Defined to invert the jack detection.
+
+  everest,interrupt-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      value of reg 0x58, Defines the interrupt source.
+      Bit(2) 1 means button press triggers irq, 0 means not.
+      Bit(3) 1 means PIN9 is the irq source for jack detection. When set to 0,
+      bias change on PIN9 do not triggers irq.
+      Bit(4) 1 means PIN27 is the irq source for jack detection.
+      Bit(5) 1 means PIN9 is the irq source after MIC detect.
+      Bit(6) 1 means PIN27 is the irq source after MIC detect.
+    minimum: 0
+    maximum: 0x3c
+    default: 0x08
+
+  everest,interrupt-clk:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+     value of reg 0x59, Defines the interrupt output behavior.
+     Bit(0-3) 0 means irq pulse equals 512*internal clock
+       1 means irq pulse equals 1024*internal clock
+       2 means ...
+       7 means irq pulse equals 65536*internal clock
+       8 means irq mutes PA
+       9 means irq mutes PA and DAC output
+     Bit(4) 1 means we invert the interrupt output.
+     Bit(6) 1 means the chip do not detect jack type after button released.
+       0 means the chip detect jack type again after button released.
+    minimum: 0
+    maximum: 0x7f
+    default: 0x45
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8326: codec@19 {
+        compatible = "everest,es8326";
+        reg = <0x19>;
+        clocks = <&clks 10>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+        everest,mic1-src = [22];
+        everest,mic2-src = [44];
+        everest,jack-pol = [0e];
+        everest,interrupt-src = [08];
+        everest,interrupt-clk = [45];
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
new file mode 100644
index 0000000000..998b4c8a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -0,0 +1,80 @@
+Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
+signal associated with an input clock into a signal associated with a different
+output clock. The driver currently works as a Front End of DPCM with other Back
+Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
+three substreams within totally 10 channels.
+
+Required properties:
+
+  - compatible		: Compatible list, should contain one of the following
+			  compatibles:
+			  "fsl,imx35-asrc",
+			  "fsl,imx53-asrc",
+			  "fsl,imx8qm-asrc",
+			  "fsl,imx8qxp-asrc",
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Contains the following entries
+	"mem"		  Peripheral access clock to access registers.
+	"ipg"		  Peripheral clock to driver module.
+	"asrck_<0-f>"	  Clock sources for input and output clock.
+	"spba"		  The spba clock is required when ASRC is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
+
+   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
+
+   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
+
+   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
+			  by imx8qm/imx8qxp platform
+			  <0> - select the map for asrc0 in imx8qm/imx8qxp
+			  <1> - select the map for asrc1 in imx8qm/imx8qxp
+
+Optional properties:
+
+   - big-endian		: If this property is absent, the little endian mode
+			  will be in use as default. Otherwise, the big endian
+			  mode will be in use for all the device registers.
+
+   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
+			  Ends, which can replace the fsl,asrc-width.
+			  The value is 2 (S16_LE), or 6 (S24_LE).
+
+Example:
+
+asrc: asrc@2034000 {
+	compatible = "fsl,imx53-asrc";
+	reg = <0x02034000 0x4000>;
+	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 107>, <&clks 0>, <&clks 0>;
+	clock-names = "mem", "ipg", "asrck0",
+		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+		"asrck_d", "asrck_e", "asrck_f";
+	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+	dma-names = "rxa", "rxb", "rxc",
+		"txa", "txb", "txc";
+	fsl,asrc-rate  = <48000>;
+	fsl,asrc-width = <16>;
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
new file mode 100644
index 0000000000..aa4be71707
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8mp-aud2htx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: bus
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: tx
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    aud2htx: aud2htx@30cb0000 {
+        compatible = "fsl,imx8mp-aud2htx";
+        reg = <0x30cb0000 0x10000>;
+        interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+        clock-names = "bus";
+        dmas = <&sdma2 26 2 0>;
+        dma-names = "tx";
+        power-domains = <&audiomix_pd>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,audmix.txt b/Documentation/devicetree/bindings/sound/fsl,audmix.txt
new file mode 100644
index 0000000000..840b7e0d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,audmix.txt
@@ -0,0 +1,50 @@
+NXP Audio Mixer (AUDMIX).
+
+The Audio Mixer is a on-chip functional module that allows mixing of two
+audio streams into a single audio stream. Audio Mixer has two input serial
+audio interfaces. These are driven by two Synchronous Audio interface
+modules (SAI). Each input serial interface carries 8 audio channels in its
+frame in TDM manner. Mixer mixes audio samples of corresponding channels
+from two interfaces into a single sample. Before mixing, audio samples of
+two inputs can be attenuated based on configuration. The output of the
+Audio Mixer is also a serial audio interface. Like input interfaces it has
+the same TDM frame format. This output is used to drive the serial DAC TDM
+interface of audio codec and also sent to the external pins along with the
+receive path of normal audio SAI module for readback by the CPU.
+
+The output of Audio Mixer can be selected from any of the three streams
+ - serial audio input 1
+ - serial audio input 2
+ - mixed audio
+
+Mixing operation is independent of audio sample rate but the two audio
+input streams must have same audio sample rate with same number of channels
+in TDM frame to be eligible for mixing.
+
+Device driver required properties:
+=================================
+  - compatible		: Compatible list, contains "fsl,imx8qm-audmix"
+
+  - reg			: Offset and length of the register set for the device.
+
+  - clocks		: Must contain an entry for each entry in clock-names.
+
+  - clock-names		: Must include the "ipg" for register access.
+
+  - power-domains	: Must contain the phandle to AUDMIX power domain node
+
+  - dais		: Must contain a list of phandles to AUDMIX connected
+			  DAIs. The current implementation requires two phandles
+			  to SAI interfaces to be provided, the first SAI in the
+			  list being used to route the AUDMIX output.
+
+Device driver configuration example:
+======================================
+  audmix: audmix@59840000 {
+    compatible = "fsl,imx8qm-audmix";
+    reg = <0x0 0x59840000 0x0 0x10000>;
+    clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>;
+    clock-names = "ipg";
+    power-domains = <&pd_audmix>;
+    dais = <&sai4>, <&sai5>;
+  };
diff --git a/Documentation/devicetree/bindings/sound/fsl,easrc.yaml b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
new file mode 100644
index 0000000000..a680d7aff2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,easrc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,easrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Asynchronous Sample Rate Converter (ASRC) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^easrc@.*"
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mn-easrc
+      - items:
+          - enum:
+              - fsl,imx8mp-easrc
+          - const: fsl,imx8mn-easrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: mem
+
+  dmas:
+    maxItems: 8
+
+  dma-names:
+    items:
+      - const: ctx0_rx
+      - const: ctx0_tx
+      - const: ctx1_rx
+      - const: ctx1_tx
+      - const: ctx2_rx
+      - const: ctx2_tx
+      - const: ctx3_rx
+      - const: ctx3_tx
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    const: imx/easrc/easrc-imx8mn.bin
+    description: The coefficient table for the filters
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8000
+    maximum: 192000
+    description: Defines a mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 6, 10, 32, 36]
+    default: 2
+    description:
+      Defines a mutual sample format used by DPCM Back Ends
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - firmware-name
+  - fsl,asrc-rate
+  - fsl,asrc-format
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    easrc: easrc@300c0000 {
+           compatible = "fsl,imx8mn-easrc";
+           reg = <0x300c0000 0x10000>;
+           interrupts = <0x0 122 0x4>;
+           clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+           clock-names = "mem";
+           dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+                  <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+                  <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+                  <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+           dma-names = "ctx0_rx", "ctx0_tx",
+                       "ctx1_rx", "ctx1_tx",
+                       "ctx2_rx", "ctx2_tx",
+                       "ctx3_rx", "ctx3_tx";
+           firmware-name = "imx/easrc/easrc-imx8mn.bin";
+           fsl,asrc-rate  = <8000>;
+           fsl,asrc-format = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
new file mode 100644
index 0000000000..90112ca1ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -0,0 +1,68 @@
+Freescale Enhanced Serial Audio Interface (ESAI) Controller
+
+The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
+for serial communication with a variety of serial devices, including industry
+standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
+other DSPs. It has up to six transmitters and four receivers.
+
+Required properties:
+
+  - compatible		: Compatible list, should contain one of the following
+			  compatibles:
+			  "fsl,imx35-esai",
+			  "fsl,vf610-esai",
+			  "fsl,imx6ull-esai",
+			  "fsl,imx8qm-esai",
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Two dmas have to be defined, "tx" and "rx".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Includes the following entries:
+	"core"		  The core clock used to access registers
+	"extal"		  The esai baud clock for esai controller used to
+			  derive HCK, SCK and FS.
+	"fsys"		  The system clock derived from ahb clock used to
+			  derive HCK, SCK and FS.
+	"spba"		  The spba clock is required when ESAI is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
+
+  - fsl,fifo-depth	: The number of elements in the transmit and receive
+			  FIFOs. This number is the maximum allowed value for
+			  TFCR[TFWM] or RFCR[RFWM].
+
+  - fsl,esai-synchronous: This is a boolean property. If present, indicating
+			  that ESAI would work in the synchronous mode, which
+			  means all the settings for Receiving would be
+			  duplicated from Transmission related registers.
+
+Optional properties:
+
+  - big-endian		: If this property is absent, the native endian mode
+			  will be in use as default, or the big endian mode
+			  will be in use for all the device registers.
+
+Example:
+
+esai: esai@2024000 {
+	compatible = "fsl,imx35-esai";
+	reg = <0x02024000 0x4000>;
+	interrupts = <0 51 0x04>;
+	clocks = <&clks 208>, <&clks 118>, <&clks 208>;
+	clock-names = "core", "extal", "fsys";
+	dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+	dma-names = "rx", "tx";
+	fsl,fifo-depth = <128>;
+	fsl,esai-synchronous;
+	big-endian;
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
new file mode 100644
index 0000000000..b7e6058356
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MICFIL Digital Audio Interface (MICFIL)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The MICFIL digital interface provides a 16-bit or 24-bit audio signal
+  from a PDM microphone bitstream in a configurable output sampling rate.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-micfil
+      - fsl,imx8mp-micfil
+      - fsl,imx93-micfil
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Digital Microphone interface interrupt
+      - description: Digital Microphone interface error interrupt
+      - description: voice activity detector event interrupt
+      - description: voice activity detector error interrupt
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: rx
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: internal micfil clock
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+      - description: External clock 3
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: ipg_clk
+      - const: ipg_clk_app
+      - const: pll8k
+      - const: pll11k
+      - const: clkext3
+    minItems: 2
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    micfil: audio-controller@30080000 {
+        compatible = "fsl,imx8mm-micfil";
+        reg = <0x30080000 0x10000>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                 <&clk IMX8MM_CLK_PDM_ROOT>;
+        clock-names = "ipg_clk", "ipg_clk_app";
+        dmas = <&sdma2 24 25 0>;
+        dma-names = "rx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
new file mode 100644
index 0000000000..d66284b8be
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@@ -0,0 +1,36 @@
+fsl,mqs audio CODEC
+
+Required properties:
+  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
+		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
+  - clocks : A list of phandles + clock-specifiers, one for each entry in
+	     clock-names
+  - clock-names : "mclk" - must required.
+		  "core" - required if compatible is "fsl,imx8qm-mqs", it
+		           is for register access.
+  - gpr : A phandle of General Purpose Registers in IOMUX Controller.
+	  Required if compatible is "fsl,imx6sx-mqs".
+
+Required if compatible is "fsl,imx8qm-mqs":
+  - power-domains: A phandle of PM domain provider node.
+  - reg: Offset and length of the register set for the device.
+
+Example:
+
+mqs: mqs {
+	compatible = "fsl,imx6sx-mqs";
+	gpr = <&gpr>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "disabled";
+};
+
+mqs: mqs@59850000 {
+	compatible = "fsl,imx8qm-mqs";
+	reg = <0x59850000 0x10000>;
+	clocks = <&clk IMX8QM_AUD_MQS_IPG>,
+		 <&clk IMX8QM_AUD_MQS_HMCLK>;
+	clock-names = "core", "mclk";
+	power-domains = <&pd_mqs0>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml b/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml
new file mode 100644
index 0000000000..ff5cd92419
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,qmc-audio.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,qmc-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QMC audio
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+  The QMC audio is an ASoC component which uses QMC (QUICC Multichannel
+  Controller) channels to transfer the audio data.
+  It provides as many DAI as the number of QMC channel used.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: fsl,qmc-audio
+
+  '#address-cells':
+    const: 1
+  '#size-cells':
+    const: 0
+  '#sound-dai-cells':
+    const: 1
+
+patternProperties:
+  '^dai@([0-9]|[1-5][0-9]|6[0-3])$':
+    description:
+      A DAI managed by this controller
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 63
+        description:
+          The DAI number
+
+      fsl,qmc-chan:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          - items:
+              - description: phandle to QMC node
+              - description: Channel number
+        description:
+          Should be a phandle/number pair. The phandle to QMC node and the QMC
+          channel to use for this DAI.
+
+    required:
+      - reg
+      - fsl,qmc-chan
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    audio_controller: audio-controller {
+        compatible = "fsl,qmc-audio";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #sound-dai-cells = <1>;
+        dai@16 {
+            reg = <16>;
+            fsl,qmc-chan = <&qmc 16>;
+        };
+        dai@17 {
+            reg = <17>;
+            fsl,qmc-chan = <&qmc 17>;
+        };
+    };
+
+    sound {
+        compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        simple-audio-card,dai-link@0 {
+            reg = <0>;
+            format = "dsp_b";
+            cpu {
+                sound-dai = <&audio_controller 16>;
+            };
+            codec {
+                sound-dai = <&codec1>;
+                dai-tdm-slot-num = <4>;
+                dai-tdm-slot-width = <8>;
+                /* TS 3, 5, 7, 9 */
+                dai-tdm-slot-tx-mask = <0 0 0 1 0 1 0 1 0 1>;
+                dai-tdm-slot-rx-mask = <0 0 0 1 0 1 0 1 0 1>;
+            };
+        };
+        simple-audio-card,dai-link@1 {
+            reg = <1>;
+            format = "dsp_b";
+            cpu {
+                sound-dai = <&audio_controller 17>;
+            };
+            codec {
+                sound-dai = <&codec2>;
+                dai-tdm-slot-num = <4>;
+                dai-tdm-slot-width = <8>;
+                /* TS 2, 4, 6, 8 */
+                dai-tdm-slot-tx-mask = <0 0 1 0 1 0 1 0 1>;
+                dai-tdm-slot-rx-mask = <0 0 1 0 1 0 1 0 1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
new file mode 100644
index 0000000000..188f38badd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio RPMSG CPU DAI Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  fsl_rpmsg is a virtual audio device. Mapping to real hardware devices
+  are SAI, MICFIL, DMA controlled by Cortex M core. What we see from
+  Linux side is a device which provides audio service by rpmsg channel.
+  We can create different sound cards which access different hardwares
+  such as SAI, MICFIL, .etc through building rpmsg channels between
+  Cortex-A and Cortex-M.
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx7ulp-rpmsg-audio
+      - fsl,imx8mn-rpmsg-audio
+      - fsl,imx8mm-rpmsg-audio
+      - fsl,imx8mp-rpmsg-audio
+      - fsl,imx8ulp-rpmsg-audio
+      - fsl,imx93-rpmsg-audio
+
+  clocks:
+    items:
+      - description: Peripheral clock for register access
+      - description: Master clock
+      - description: DMA clock for DMA register access
+      - description: Parent clock for multiple of 8kHz sample rates
+      - description: Parent clock for multiple of 11kHz sample rates
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: mclk
+      - const: dma
+      - const: pll8k
+      - const: pll11k
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      The M core can't access all the DDR memory space on some platform,
+      So reserved a specific memory for dma buffer which M core can
+      access.
+      (see bindings/reserved-memory/reserved-memory.txt)
+
+  audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to a node of audio codec
+
+  fsl,enable-lpa:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enable low power audio path.
+
+  fsl,rpmsg-out:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This is a boolean property. If present, the transmitting function
+      will be enabled.
+
+  fsl,rpmsg-in:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This is a boolean property. If present, the receiving function
+      will be enabled.
+
+  fsl,rpmsg-channel-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      A string property to assign rpmsg channel this sound card sits on.
+      This property can be omitted if there is only one sound card and it sits
+      on "rpmsg-audio-channel".
+    enum:
+      - rpmsg-audio-channel
+      - rpmsg-micfil-channel
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+
+    rpmsg_audio: rpmsg_audio {
+        compatible = "fsl,imx8mn-rpmsg-audio";
+        model = "wm8524-audio";
+        fsl,enable-lpa;
+        fsl,rpmsg-out;
+        clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+                 <&clk IMX8MN_CLK_SAI3_ROOT>,
+                 <&clk IMX8MN_CLK_SDMA3_ROOT>,
+                 <&clk IMX8MN_AUDIO_PLL1_OUT>,
+                 <&clk IMX8MN_AUDIO_PLL2_OUT>;
+        clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    rpmsg_micfil: audio-controller {
+        compatible = "fsl,imx8mm-rpmsg-audio";
+        model = "micfil-audio";
+        fsl,rpmsg-channel-name = "rpmsg-micfil-channel";
+        fsl,enable-lpa;
+        fsl,rpmsg-in;
+        clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                 <&clk IMX8MM_CLK_PDM_ROOT>,
+                 <&clk IMX8MM_CLK_SDMA3_ROOT>,
+                 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+                 <&clk IMX8MM_AUDIO_PLL2_OUT>;
+        clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
new file mode 100644
index 0000000000..088c26b001
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Synchronous Audio Interface (SAI).
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The SAI is based on I2S module that used communicating with audio codecs,
+  which provides a synchronous audio interface that supports fullduplex
+  serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+  codec/DSP interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6ul-sai
+              - fsl,imx7d-sai
+          - const: fsl,imx6sx-sai
+
+      - items:
+          - enum:
+              - fsl,imx8mm-sai
+              - fsl,imx8mn-sai
+              - fsl,imx8mp-sai
+          - const: fsl,imx8mq-sai
+
+      - items:
+          - enum:
+              - fsl,imx6sx-sai
+              - fsl,imx7ulp-sai
+              - fsl,imx8mq-sai
+              - fsl,imx8qm-sai
+              - fsl,imx8ulp-sai
+              - fsl,imx93-sai
+              - fsl,vf610-sai
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: master clock source 0 (obsoleted)
+      - description: master clock source 1
+      - description: master clock source 2
+      - description: master clock source 3
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+    minItems: 4
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: bus
+          - const: mclk0
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 5
+      - items:
+          - const: bus
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  interrupts:
+    items:
+      - description: receive and transmit interrupt
+
+  big-endian:
+    description: |
+      required if all the SAI registers are big-endian rather than little-endian.
+    type: boolean
+
+  fsl,dataline:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Configure the dataline. It has 3 value for each configuration
+    maxItems: 16
+    items:
+      items:
+        - description: format Default(0), I2S(1) or PDM(2)
+          enum: [0, 1, 2]
+        - description: dataline mask for 'rx'
+        - description: dataline mask for 'tx'
+
+  fsl,sai-mclk-direction-output:
+    description: SAI will output the SAI MCLK clock.
+    type: boolean
+
+  fsl,sai-synchronous-rx:
+    description: |
+      SAI will work in the synchronous mode (sync Tx with Rx) which means
+      both the transmitter and the receiver will send and receive data by
+      following receiver's bit clocks and frame sync clocks.
+    type: boolean
+
+  fsl,sai-asynchronous:
+    description: |
+      SAI will work in the asynchronous mode, which means both transmitter
+      and receiver will send and receive data by following their own bit clocks
+      and frame sync clocks separately.
+      If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
+      default synchronous mode (sync Rx with Tx) will be used, which means both
+      transmitter and receiver will send and receive data by following clocks
+      of transmitter.
+    type: boolean
+
+  fsl,shared-interrupt:
+    description: Interrupt is shared with other modules.
+    type: boolean
+
+  lsb-first:
+    description: |
+      Configures whether the LSB or the MSB is transmitted
+      first for the fifo data. If this property is absent,
+      the MSB is transmitted first as default, or the LSB
+      is transmitted first.
+    type: boolean
+
+  "#sound-dai-cells":
+    const: 0
+    description: optional, some dts node didn't add it.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      required:
+        - fsl,sai-asynchronous
+    then:
+      properties:
+        fsl,sai-synchronous-rx: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    sai2: sai@40031000 {
+        compatible = "fsl,vf610-sai";
+        reg = <0x40031000 0x1000>;
+        interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sai2_1>;
+        clocks = <&clks VF610_CLK_PLATFORM_BUS>,
+                 <&clks VF610_CLK_SAI2>,
+                 <&clks 0>, <&clks 0>;
+        clock-names = "bus", "mclk1", "mclk2", "mclk3";
+        dma-names = "rx", "tx";
+        dmas = <&edma0 0 20>, <&edma0 0 21>;
+        big-endian;
+        lsb-first;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    sai1: sai@30010000 {
+        compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+        reg = <0x30010000 0x10000>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+                 <&clk IMX8MM_CLK_DUMMY>,
+                 <&clk IMX8MM_CLK_SAI1_ROOT>,
+                 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+        clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+        dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+        dma-names = "rx", "tx";
+        fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
new file mode 100644
index 0000000000..1d64e8337a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The Freescale S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via an coaxial cable or
+  a fibre cable.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx35-spdif
+      - fsl,vf610-spdif
+      - fsl,imx6sx-spdif
+      - fsl,imx8qm-spdif
+      - fsl,imx8qxp-spdif
+      - fsl,imx8mq-spdif
+      - fsl,imx8mm-spdif
+      - fsl,imx8mn-spdif
+      - fsl,imx8ulp-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    items:
+      - description: The core clock of spdif controller.
+      - description: Clock for tx0 and rx0.
+      - description: Clock for tx1 and rx1.
+      - description: Clock for tx2 and rx2.
+      - description: Clock for tx3 and rx3.
+      - description: Clock for tx4 and rx4.
+      - description: Clock for tx5 and rx5.
+      - description: Clock for tx6 and rx6.
+      - description: Clock for tx7 and rx7.
+      - description: The spba clock is required when SPDIF is placed as a bus
+          slave of the Shared Peripheral Bus and when two or more bus masters
+          (CPU, DMA or DSP) try to access it. This property is optional depending
+          on the SoC design.
+      - description: PLL clock source for 8kHz series rate, optional.
+      - description: PLL clock source for 11khz series rate, optional.
+    minItems: 9
+
+  clock-names:
+    items:
+      - const: core
+      - const: rxtx0
+      - const: rxtx1
+      - const: rxtx2
+      - const: rxtx3
+      - const: rxtx4
+      - const: rxtx5
+      - const: rxtx6
+      - const: rxtx7
+      - const: spba
+      - const: pll8k
+      - const: pll11k
+    minItems: 9
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If this property is absent, the native endian mode will be in use
+      as default, or the big endian mode will be in use for all the device
+      registers. Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@2004000 {
+        compatible = "fsl,imx35-spdif";
+        reg = <0x02004000 0x4000>;
+        interrupts = <0 52 0x04>;
+        dmas = <&sdma 14 18 0>,
+               <&sdma 15 18 0>;
+        dma-names = "rx", "tx";
+        clocks = <&clks 197>, <&clks 3>,
+                 <&clks 197>, <&clks 107>,
+                 <&clks 0>, <&clks 118>,
+                 <&clks 62>, <&clks 139>,
+                 <&clks 0>;
+        clock-names = "core", "rxtx0",
+                      "rxtx1", "rxtx2",
+                      "rxtx3", "rxtx4",
+                      "rxtx5", "rxtx6",
+                      "rxtx7";
+        big-endian;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
new file mode 100644
index 0000000000..7e15a85cec
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -0,0 +1,87 @@
+Freescale Synchronous Serial Interface
+
+The SSI is a serial device that communicates with audio codecs.  It can
+be programmed in AC97, I2S, left-justified, or right-justified modes.
+
+Required properties:
+- compatible:       Compatible list, should contain one of the following
+                    compatibles:
+                      fsl,mpc8610-ssi
+                      fsl,imx51-ssi
+                      fsl,imx35-ssi
+                      fsl,imx21-ssi
+- cell-index:       The SSI, <0> = SSI1, <1> = SSI2, and so on.
+- reg:              Offset and length of the register set for the device.
+- interrupts:       <a b> where a is the interrupt number and b is a
+                    field that represents an encoding of the sense and
+                    level information for the interrupt.  This should be
+                    encoded based on the information in section 2)
+                    depending on the type of interrupt controller you
+                    have.
+- fsl,fifo-depth:   The number of elements in the transmit and receive FIFOs.
+                    This number is the maximum allowed value for SFCSR[TFWM0].
+ - clocks:          "ipg" - Required clock for the SSI unit
+                    "baud" - Required clock for SSI master mode. Otherwise this
+		      clock is not used
+
+Required are also ac97 link bindings if ac97 is used. See
+Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
+bindings.
+
+Optional properties:
+- codec-handle:     Phandle to a 'codec' node that defines an audio
+                    codec connected to this SSI.  This node is typically
+                    a child of an I2C or other control node.
+- fsl,fiq-stream-filter: Bool property. Disabled DMA and use FIQ instead to
+		    filter the codec stream. This is necessary for some boards
+		    where an incompatible codec is connected to this SSI, e.g.
+		    on pca100 and pcm043.
+- dmas:		    Generic dma devicetree binding as described in
+		    Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
+		    is not defined.
+- fsl,mode:         The operating mode for the AC97 interface only.
+                    "ac97-slave" - AC97 mode, SSI is clock slave
+                    "ac97-master" - AC97 mode, SSI is clock master
+- fsl,ssi-asynchronous:
+                    If specified, the SSI is to be programmed in asynchronous
+                    mode.  In this mode, pins SRCK, STCK, SRFS, and STFS must
+                    all be connected to valid signals.  In synchronous mode,
+                    SRCK and SRFS are ignored.  Asynchronous mode allows
+                    playback and capture to use different sample sizes and
+                    sample rates.  Some drivers may require that SRCK and STCK
+                    be connected together, and SRFS and STFS be connected
+                    together.  This would still allow different sample sizes,
+                    but not different sample rates.
+- fsl,playback-dma: Phandle to a node for the DMA channel to use for
+                    playback of audio.  This is typically dictated by SOC
+                    design.  See the notes below.
+                    Only used on Power Architecture.
+- fsl,capture-dma:  Phandle to a node for the DMA channel to use for
+                    capture (recording) of audio.  This is typically dictated
+                    by SOC design.  See the notes below.
+                    Only used on Power Architecture.
+
+Child 'codec' node required properties:
+- compatible:       Compatible list, contains the name of the codec
+
+Child 'codec' node optional properties:
+- clock-frequency:  The frequency of the input clock, which typically comes
+                    from an on-board dedicated oscillator.
+
+Notes on fsl,playback-dma and fsl,capture-dma:
+
+On SOCs that have an SSI, specific DMA channels are hard-wired for playback
+and capture.  On the MPC8610, for example, SSI1 must use DMA channel 0 for
+playback and DMA channel 1 for capture.  SSI2 must use DMA channel 2 for
+playback and DMA channel 3 for capture.  The developer can choose which
+DMA controller to use, but the channels themselves are hard-wired.  The
+purpose of these two properties is to represent this hardware design.
+
+The device tree nodes for the DMA channels that are referenced by
+"fsl,playback-dma" and "fsl,capture-dma" must be marked as compatible with
+"fsl,ssi-dma-channel".  The SOC-specific compatible string (e.g.
+"fsl,mpc8610-dma-channel") can remain.  If these nodes are left as
+"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel", then the generic Elo DMA
+drivers (fsldma) will attempt to use them, and it will conflict with the
+sound drivers.
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
new file mode 100644
index 0000000000..799b362ba4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Transceiver (XCVR) Controller
+
+maintainers:
+  - Viorel Suman <viorel.suman@nxp.com>
+
+description: |
+  NXP XCVR (Audio Transceiver) is a on-chip functional module
+  that allows CPU to receive and transmit digital audio via
+  HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
+
+properties:
+  $nodename:
+    pattern: "^xcvr@.*"
+
+  compatible:
+    enum:
+      - fsl,imx8mp-xcvr
+      - fsl,imx93-xcvr
+
+  reg:
+    items:
+      - description: 20K RAM for code and data
+      - description: registers space
+      - description: RX FIFO address
+      - description: TX FIFO address
+
+  reg-names:
+    items:
+      - const: ram
+      - const: regs
+      - const: rxfifo
+      - const: txfifo
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: PHY clock
+      - description: SPBA clock
+      - description: PLL clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: phy
+      - const: spba
+      - const: pll_ipg
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/reset/imx8mp-reset.h>
+
+    xcvr: xcvr@30cc0000 {
+           compatible = "fsl,imx8mp-xcvr";
+           reg = <0x30cc0000 0x800>,
+                 <0x30cc0800 0x400>,
+                 <0x30cc0c00 0x080>,
+                 <0x30cc0e00 0x080>;
+           reg-names = "ram", "regs", "rxfifo", "txfifo";
+           interrupts = <0x0 128 IRQ_TYPE_LEVEL_HIGH>;
+           clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_IPG>,
+                    <&audiomix_clk IMX8MP_CLK_AUDIOMIX_EARC_PHY>,
+                    <&audiomix_clk IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>,
+                    <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>;
+           clock-names = "ipg", "phy", "spba", "pll_ipg";
+           dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>;
+           dma-names = "rx", "tx";
+           resets = <&audiomix_reset 0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
new file mode 100644
index 0000000000..4e8dbc5abf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -0,0 +1,117 @@
+Freescale Generic ASoC Sound Card with ASRC support
+
+The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale
+SoCs connecting with external CODECs.
+
+The idea of this generic sound card is a bit like ASoC Simple Card. However,
+for Freescale SoCs (especially those released in recent years), most of them
+have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And
+this is a specific feature that might be painstakingly controlled and merged
+into the Simple Card.
+
+So having this generic sound card allows all Freescale SoC users to benefit
+from the simplification of a new card support and the capability of the wide
+sample rates support through ASRC.
+
+Note: The card is initially designed for those sound cards who use AC'97, I2S
+      and PCM DAI formats. However, it'll be also possible to support those non
+      AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as
+      long as the driver has been properly upgraded.
+
+
+The compatible list for this generic sound card currently:
+ "fsl,imx-audio-ac97"
+
+ "fsl,imx-audio-cs42888"
+
+ "fsl,imx-audio-cs427x"
+ (compatible with CS4271 and CS4272)
+
+ "fsl,imx-audio-wm8962"
+
+ "fsl,imx-audio-sgtl5000"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
+
+ "fsl,imx-audio-wm8960"
+
+ "fsl,imx-audio-mqs"
+
+ "fsl,imx-audio-wm8524"
+
+ "fsl,imx-audio-tlv320aic32x4"
+
+ "fsl,imx-audio-tlv320aic31xx"
+
+ "fsl,imx-audio-si476x"
+
+ "fsl,imx-audio-wm8958"
+
+ "fsl,imx-audio-nau8822"
+
+Required properties:
+
+  - compatible		: Contains one of entries in the compatible list.
+
+  - model		: The user-visible name of this sound complex
+
+  - audio-cpu		: The phandle of an CPU DAI controller
+
+  - audio-codec		: The phandle of an audio codec
+
+Optional properties:
+
+  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
+			  need to add ASRC support via DPCM.
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. There're a few pre-designed board connectors:
+			   * Line Out Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Mic Jack
+			   * Ext Spk
+			   * AMIC (stands for Analog Microphone Jack)
+			   * DMIC (stands for Digital Microphone Jack)
+
+			  Note: The "Mic Jack" and "AMIC" are redundant while
+			        coexisting in order to support the old bindings
+				of wm8962 and sgtl5000.
+
+  - hp-det-gpio		: The GPIO that detect headphones are plugged in
+  - mic-det-gpio	: The GPIO that detect microphones are plugged in
+  - bitclock-master	: Indicates dai-link bit clock master; for details see simple-card.yaml.
+  - frame-master	: Indicates dai-link frame master; for details see simple-card.yaml.
+  - dai-format		: audio format, for details see simple-card.yaml.
+  - frame-inversion	: dai-link uses frame clock inversion, for details see simple-card.yaml.
+  - bitclock-inversion	: dai-link uses bit clock inversion, for details see simple-card.yaml.
+  - mclk-id		: main clock id, specific for each card configuration.
+
+Optional unless SSI is selected as a CPU DAI:
+
+  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX)
+
+  - mux-ext-port	: The external port of the i.MX audio muxer
+
+Example:
+sound-cs42888 {
+	compatible = "fsl,imx-audio-cs42888";
+	model = "cs42888-audio";
+	audio-cpu = <&esai>;
+	audio-asrc = <&asrc>;
+	audio-codec = <&cs42888>;
+	audio-routing =
+		"Line Out Jack", "AOUT1L",
+		"Line Out Jack", "AOUT1R",
+		"Line Out Jack", "AOUT2L",
+		"Line Out Jack", "AOUT2R",
+		"Line Out Jack", "AOUT3L",
+		"Line Out Jack", "AOUT3R",
+		"Line Out Jack", "AOUT4L",
+		"Line Out Jack", "AOUT4R",
+		"AIN1L", "Line In Jack",
+		"AIN1R", "Line In Jack",
+		"AIN2L", "Line In Jack",
+		"AIN2R", "Line In Jack";
+};
diff --git a/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml
new file mode 100644
index 0000000000..5329dc140b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,chv3-codec.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,chv3-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chameleon v3 audio codec
+
+maintainers:
+  - Paweł Anikiel <pan@semihalf.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: google,chv3-codec
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    audio-codec {
+        compatible = "google,chv3-codec";
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml
new file mode 100644
index 0000000000..3ce910f44d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,chv3-i2s.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,chv3-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Chameleon v3 I2S device
+
+maintainers:
+  - Paweł Anikiel <pan@semihalf.com>
+
+description: |
+  I2S device for the Google Chameleon v3. The device handles both RX
+  and TX using a producer/consumer ring buffer design.
+
+properties:
+  compatible:
+    const: google,chv3-i2s
+
+  reg:
+    items:
+      - description: core registers
+      - description: irq registers
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@c0060300 {
+        compatible = "google,chv3-i2s";
+        reg = <0xc0060300 0x100>,
+              <0xc0060f00 0x10>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
new file mode 100644
index 0000000000..1434f44337
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,cros-ec-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio codec controlled by ChromeOS EC
+
+maintainers:
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+description: |
+  Google's ChromeOS EC codec is a digital mic codec provided by the
+  Embedded Controller (EC) and is controlled via a host-command
+  interface.  An EC codec node should only be found inside the "codecs"
+  subnode of a cros-ec node.
+  (see Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: google,cros-ec-codec
+
+  "#sound-dai-cells":
+    const: 1
+
+  reg:
+    items:
+      - description: |
+          Physical base address and length of shared memory region from EC.
+          It contains 3 unsigned 32-bit integer. The first 2 integers
+          combine to become an unsigned 64-bit physical address.
+          The last one integer is the length of the shared memory.
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region to EC.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved_mem: reserved-mem@52800000 {
+        compatible = "shared-dma-pool";
+        reg = <0x52800000 0x100000>;
+        no-map;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+            interrupts = <93 0>;
+
+            codecs {
+                #address-cells = <2>;
+                #size-cells = <1>;
+
+                cros_ec_codec: ec-codec@10500000 {
+                    compatible = "google,cros-ec-codec";
+                    #sound-dai-cells = <1>;
+                    reg = <0x0 0x10500000 0x80000>;
+                    memory-region = <&reserved_mem>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
new file mode 100644
index 0000000000..bac9405539
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,sc7180-trogdor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google SC7180-Trogdor ASoC sound card driver
+
+maintainers:
+  - Rohit kumar <quic_rohkumar@quicinc.com>
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+
+description:
+  This binding describes the SC7180 sound card which uses LPASS for audio.
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - google,sc7180-trogdor
+      - google,sc7180-coachz
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  dmic-gpios:
+    maxItems: 1
+    description: GPIO for switching between DMICs
+
+patternProperties:
+  "^dai-link(@[0-9])?$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+        description: dai link address.
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 4
+
+    required:
+      - link-name
+      - cpu
+      - codec
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    sound {
+        compatible = "google,sc7180-trogdor";
+        model = "sc7180-rt5682-max98357a-2mic";
+
+        audio-routing =
+                    "Headphone Jack", "HPOL",
+                    "Headphone Jack", "HPOR";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dmic-gpios = <&tlmm 86 0>;
+
+        dai-link@0 {
+            link-name = "MultiMedia0";
+            reg = <0>;
+            cpu {
+                sound-dai = <&lpass_cpu 0>;
+            };
+
+            codec {
+                sound-dai = <&alc5682 0>;
+            };
+        };
+
+        dai-link@1 {
+            link-name = "MultiMedia1";
+            reg = <1>;
+            cpu {
+                sound-dai = <&lpass_cpu 1>;
+            };
+
+            codec {
+                sound-dai = <&max98357a>;
+            };
+        };
+
+        dai-link@2 {
+            link-name = "MultiMedia2";
+            reg = <2>;
+            cpu {
+                sound-dai = <&lpass_hdmi 0>;
+            };
+
+            codec {
+                sound-dai = <&msm_dp>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
new file mode 100644
index 0000000000..ec4b6e547c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,sc7280-herobrine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google SC7280-Herobrine ASoC sound card driver
+
+maintainers:
+  - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
+  - Judy Hsiao <judyhsiao@chromium.org>
+
+description:
+  This binding describes the SC7280 sound card which uses LPASS for audio.
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - google,sc7280-herobrine
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^dai-link@[0-9a-f]$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+        description: dai link address.
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        properties:
+          sound-dai: true
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        properties:
+          sound-dai: true
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+      platform:
+        description: Holds subnode which includes the phandle of q6apm platform device.
+        type: object
+        properties:
+          sound-dai:
+            maxItems: 1
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+    required:
+      - link-name
+      - cpu
+      - codec
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound {
+        compatible = "google,sc7280-herobrine";
+        model = "sc7280-wcd938x-max98360a-4dmic";
+
+        audio-routing =
+            "IN1_HPHL", "HPHL_OUT",
+            "IN2_HPHR", "HPHR_OUT",
+            "AMIC1", "MIC BIAS1",
+            "AMIC2", "MIC BIAS2",
+            "VA DMIC0", "MIC BIAS3",
+            "VA DMIC1", "MIC BIAS3",
+            "VA DMIC2", "MIC BIAS4",
+            "VA DMIC3", "MIC BIAS4",
+            "TX SWR_ADC0", "ADC1_OUTPUT",
+            "TX SWR_ADC1", "ADC2_OUTPUT",
+            "TX SWR_ADC2", "ADC3_OUTPUT",
+            "TX SWR_DMIC0", "DMIC1_OUTPUT",
+            "TX SWR_DMIC1", "DMIC2_OUTPUT",
+            "TX SWR_DMIC2", "DMIC3_OUTPUT",
+            "TX SWR_DMIC3", "DMIC4_OUTPUT";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dai-link@0 {
+            link-name = "WCD Playback";
+            reg = <LPASS_CDC_DMA_RX0>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+            };
+
+            codec {
+                sound-dai = <&wcd938x 0>, <&swr0 0>, <&rxmacro 0>;
+            };
+        };
+        dai-link@1 {
+            link-name = "WCD Capture";
+            reg = <LPASS_CDC_DMA_TX3>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+            };
+
+            codec {
+                sound-dai = <&wcd938x 1>, <&swr1 0>, <&txmacro 0>;
+            };
+        };
+
+        dai-link@2 {
+            link-name = "MI2S Playback";
+            reg = <MI2S_SECONDARY>;
+            cpu {
+                sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+            };
+
+            codec {
+                sound-dai = <&max98360a>;
+            };
+        };
+
+        dai-link@3 {
+            link-name = "DMIC Capture";
+            reg = <LPASS_CDC_DMA_VA_TX0>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+            };
+
+            codec {
+                sound-dai = <&vamacro 0>;
+            };
+        };
+
+        dai-link@5 {
+            link-name = "DP Playback";
+            reg = <LPASS_DP_RX>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_DP_RX>;
+            };
+
+            codec {
+                sound-dai = <&mdss_dp>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt b/Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt
new file mode 100644
index 0000000000..7a296784eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt
@@ -0,0 +1,42 @@
+* Hisilicon 6210 i2s controller
+
+Required properties:
+
+- compatible: should be one of the following:
+   - "hisilicon,hi6210-i2s"
+- reg: physical base address of the i2s controller unit and length of
+   memory mapped region.
+- interrupts: should contain the i2s interrupt.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: should contain following:
+   - "dacodec"
+   - "i2s-base"
+- dmas: DMA specifiers for tx dma. See the DMA client binding,
+  Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should be "tx" and "rx"
+- hisilicon,sysctrl-syscon: phandle to sysctrl syscon
+- #sound-dai-cells: Should be set to 1 (for multi-dai)
+   - The dai cell indexes reference the following interfaces:
+       0: S2 interface
+       (Currently that is the only one available, but more may be
+        supported in the future)
+
+Example for the hi6210 i2s controller:
+
+i2s0: i2s@f7118000{
+	compatible = "hisilicon,hi6210-i2s";
+	reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
+	clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
+		 <&sys_ctrl HI6220_BBPPLL0_DIV>;
+	clock-names = "dacodec", "i2s-base";
+	dmas = <&dma0 15 &dma0 14>;
+	dma-names = "rx", "tx";
+	hisilicon,sysctrl-syscon = <&sys_ctrl>;
+	#sound-dai-cells = <1>;
+};
+
+Then when referencing the i2s controller:
+	sound-dai = <&i2s0 0>; /* index 0 => S2 interface */
+
diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt
new file mode 100644
index 0000000000..e6f05f2f6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ics43432.txt
@@ -0,0 +1,19 @@
+Invensense ICS-43432-compatible MEMS microphone with I2S output.
+
+There are no software configuration options for this device, indeed, the only
+host connection is the I2S interface. Apart from requirements on clock
+frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
+64 clock cycles in each stereo output frame; 24 of the 32 available bits
+contain audio data. A hardware pin determines if the device outputs data
+on the left or right channel of the I2S frame.
+
+Required properties:
+  - compatible: should be one of the following.
+     "invensense,ics43432": For the Invensense ICS43432
+     "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR
+
+Example:
+
+	ics43432: ics43432 {
+		compatible = "invensense,ics43432";
+	};
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-in.txt b/Documentation/devicetree/bindings/sound/img,i2s-in.txt
new file mode 100644
index 0000000000..423265cfc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,i2s-in.txt
@@ -0,0 +1,47 @@
+Imagination Technologies I2S Input Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,i2s-in"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Must include the following entry:
+	"sys"	The system clock
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"rx"	Single DMA channel used by all active I2S channels
+
+  - img,i2s-channels : Number of I2S channels instantiated in the I2S in block
+
+Optional Properties:
+
+  - interrupts : Contains the I2S in interrupts. Depending on
+	the configuration, there may be no interrupts, one interrupt,
+	or an interrupt per I2S channel. For the case where there is
+	one interrupt per channel, the interrupts should be listed
+	in ascending channel order
+
+  - resets: Contains a phandle to the I2S in reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Example:
+
+i2s_in: i2s-in@18100800 {
+	compatible = "img,i2s-in";
+	reg = <0x18100800 0x200>;
+	interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 30 0xffffffff 0>;
+	dma-names = "rx";
+	clocks = <&cr_periph SYS_CLK_I2S_IN>;
+	clock-names = "sys";
+	img,i2s-channels = <6>;
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,i2s-out.txt b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
new file mode 100644
index 0000000000..6b0ee9b7e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,i2s-out.txt
@@ -0,0 +1,51 @@
+Imagination Technologies I2S Output Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,i2s-out"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Must include the following entries:
+	"sys"	The system clock
+	"ref"	The reference clock
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"tx"	Single DMA channel used by all active I2S channels
+
+  - img,i2s-channels : Number of I2S channels instantiated in the I2S out block
+
+  - resets: Contains a phandle to the I2S out reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+  - interrupts : Contains the I2S out interrupts. Depending on
+	the configuration, there may be no interrupts, one interrupt,
+	or an interrupt per I2S channel. For the case where there is
+	one interrupt per channel, the interrupts should be listed
+	in ascending channel order
+
+Example:
+
+i2s_out: i2s-out@18100a00 {
+	compatible = "img,i2s-out";
+	reg = <0x18100A00 0x200>;
+	interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 23 0xffffffff 0>;
+	dma-names = "tx";
+	clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+		 <&clk_core CLK_I2S>;
+	clock-names = "sys", "ref";
+	img,i2s-channels = <6>;
+	resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+	reset-names = "rst";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,parallel-out.txt b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
new file mode 100644
index 0000000000..37a3f94cc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,parallel-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies Parallel Output Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,parallel-out".
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device.
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"tx"
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"sys"	The system clock
+	"ref"	The reference clock
+
+  - resets: Contains a phandle to the parallel out reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+  - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+parallel_out: parallel-out@18100c00 {
+	compatible = "img,parallel-out";
+	reg = <0x18100C00 0x100>;
+	interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 16 0xffffffff 0>;
+	dma-names = "tx";
+	clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+		 <&clk_core CLK_AUDIO_DAC>;
+	clock-names = "sys", "ref";
+	resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+	reset-names = "rst";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,pistachio-internal-dac.txt b/Documentation/devicetree/bindings/sound/img,pistachio-internal-dac.txt
new file mode 100644
index 0000000000..4cc18fc047
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,pistachio-internal-dac.txt
@@ -0,0 +1,18 @@
+Pistachio internal DAC DT bindings
+
+Required properties:
+
+  - compatible: "img,pistachio-internal-dac"
+
+  - img,cr-top : Must contain a phandle to the top level control syscon
+		 node which contains the internal dac control registers
+
+  - VDD-supply : Digital power supply regulator (+1.8V or +3.3V)
+
+Examples:
+
+internal_dac: internal-dac {
+	compatible = "img,pistachio-internal-dac";
+	img,cr-top = <&cr_top>;
+	VDD-supply = <&supply3v3>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
new file mode 100644
index 0000000000..f7ea8c87bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
@@ -0,0 +1,41 @@
+Imagination Technologies SPDIF Input Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,spdif-in"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"rx"
+
+  - clocks : Contains an entry for each entry in clock-names
+
+  - clock-names : Includes the following entries:
+	"sys"	The system clock
+
+Optional Properties:
+
+  - resets: Should contain a phandle to the spdif in reset signal, if any
+
+  - reset-names: Should contain the reset signal name "rst", if a
+	reset phandle is given
+
+  - interrupts : Contains the spdif in interrupt, if present
+
+Example:
+
+spdif_in: spdif-in@18100e00 {
+	compatible = "img,spdif-in";
+	reg = <0x18100E00 0x100>;
+	interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 15 0xffffffff 0>;
+	dma-names = "rx";
+	clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+	clock-names = "sys";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
new file mode 100644
index 0000000000..413ed8b018
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies SPDIF Output Controller
+
+Required Properties:
+
+  - compatible : Compatible list, must contain "img,spdif-out"
+
+  - #sound-dai-cells : Must be equal to 0
+
+  - reg : Offset and length of the register set for the device
+
+  - dmas: Contains an entry for each entry in dma-names.
+
+  - dma-names: Must include the following entry:
+	"tx"
+
+  - clocks : Contains an entry for each entry in clock-names.
+
+  - clock-names : Includes the following entries:
+	"sys"	The system clock
+	"ref"	The reference clock
+
+  - resets: Contains a phandle to the spdif out reset signal
+
+  - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+  - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+spdif_out: spdif-out@18100d00 {
+	compatible = "img,spdif-out";
+	reg = <0x18100D00 0x100>;
+	interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&mdc 14 0xffffffff 0>;
+	dma-names = "tx";
+	clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+		 <&clk_core CLK_SPDIF>;
+	clock-names = "sys", "ref";
+	resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+	reset-names = "rst";
+	#sound-dai-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
new file mode 100644
index 0000000000..f7ad5ea249
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audio-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX audio sound card.
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx-audio-card
+
+patternProperties:
+  ".*-dai-link$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - dsp_b
+
+      dai-tdm-slot-num:
+        description: see tdm-slot.txt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dai-tdm-slot-width:
+        description: see tdm-slot.txt.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+
+      fsl,mclk-equal-bclk:
+        description: Indicates mclk can be equal to bclk, especially for sai interface
+        $ref: /schemas/types.yaml#/definitions/flag
+
+    required:
+      - link-name
+      - cpu
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound-ak4458 {
+        compatible = "fsl,imx-audio-card";
+        model = "ak4458-audio";
+        pri-dai-link {
+            link-name = "akcodec";
+            format = "i2s";
+            fsl,mclk-equal-bclk;
+            cpu {
+                 sound-dai = <&sai1>;
+            };
+            codec {
+                 sound-dai = <&ak4458_1>, <&ak4458_2>;
+            };
+        };
+        fe-dai-link {
+            link-name = "HiFi-ASRC-FE";
+            format = "i2s";
+            cpu {
+                sound-dai = <&easrc>;
+            };
+        };
+        be-dai-link {
+            link-name = "HiFi-ASRC-BE";
+            format = "dsp_b";
+            dai-tdm-slot-num = <8>;
+            dai-tdm-slot-width = <32>;
+            fsl,mclk-equal-bclk;
+            cpu {
+                sound-dai = <&sai1>;
+            };
+            codec {
+                sound-dai = <&ak4458_1>, <&ak4458_2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
new file mode 100644
index 0000000000..07b68ab206
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
@@ -0,0 +1,60 @@
+Freescale i.MX audio complex with ES8328 codec
+
+Required properties:
+- compatible       : "fsl,imx-audio-es8328"
+- model            : The user-visible name of this sound complex
+- ssi-controller   : The phandle of the i.MX SSI controller
+- jack-gpio        : Optional GPIO for headphone jack
+- audio-amp-supply : Power regulator for speaker amps
+- audio-codec      : The phandle of the ES8328 audio codec
+- audio-routing    : A list of the connections between audio components.
+                     Each entry is a pair of strings, the first being the
+		     connection's sink, the second being the connection's
+		     source. Valid names could be power supplies, ES8328
+		     pins, and the jacks on the board:
+
+			Power supplies:
+			   * audio-amp
+
+			ES8328 pins:
+			   * LOUT1
+			   * LOUT2
+			   * ROUT1
+			   * ROUT2
+			   * LINPUT1
+			   * LINPUT2
+			   * RINPUT1
+			   * RINPUT2
+			   * Mic PGA
+
+			Board connectors:
+			   * Headphone
+			   * Speaker
+			   * Mic Jack
+- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx-audio-es8328";
+	model = "imx-audio-es8328";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&codec>;
+	jack-gpio = <&gpio5 15 0>;
+	audio-amp-supply = <&reg_audio_amp>;
+	audio-routing =
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+		"Speaker", "audio-amp",
+		"Headphone", "ROUT1",
+		"Headphone", "LOUT1",
+		"LINPUT1", "Mic Jack",
+		"RINPUT1", "Mic Jack",
+		"Mic Jack", "Mic Bias";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
new file mode 100644
index 0000000000..e7e7bb65c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audio-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX audio complex with HDMI
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx-audio-hdmi
+      - fsl,imx-audio-sii902x
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  audio-cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of an CPU DAI controller
+
+  hdmi-out:
+    type: boolean
+    description: |
+      This is a boolean property. If present, the transmitting function
+      of HDMI will be enabled, indicating there's a physical HDMI out
+      connector or jack on the board or it's connecting to some other IP
+      block, such as an HDMI encoder or display-controller.
+
+  hdmi-in:
+    type: boolean
+    description: |
+      This is a boolean property. If present, the receiving function of
+      HDMI will be enabled, indicating there is a physical HDMI in
+      connector/jack on the board.
+
+required:
+  - compatible
+  - model
+  - audio-cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound-hdmi {
+        compatible = "fsl,imx-audio-hdmi";
+        model = "audio-hdmi";
+        audio-cpu = <&aud2htx>;
+        hdmi-out;
+    };
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
new file mode 100644
index 0000000000..2f89db88fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
@@ -0,0 +1,56 @@
+Freescale i.MX audio complex with SGTL5000 codec
+
+Required properties:
+
+  - compatible		: "fsl,imx-audio-sgtl5000"
+
+  - model		: The user-visible name of this sound complex
+
+  - ssi-controller	: The phandle of the i.MX SSI controller
+
+  - audio-codec		: The phandle of the SGTL5000 audio codec
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, SGTL5000
+			  pins, and the jacks on the board:
+
+			  Power supplies:
+			   * Mic Bias
+
+			  SGTL5000 pins:
+			   * MIC_IN
+			   * LINE_IN
+			   * HP_OUT
+			   * LINE_OUT
+
+			  Board connectors:
+			   * Mic Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Line Out Jack
+			   * Ext Spk
+
+  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX)
+
+  - mux-ext-port	: The external port of the i.MX audio muxer
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx51-babbage-sgtl5000",
+		     "fsl,imx-audio-sgtl5000";
+	model = "imx51-babbage-sgtl5000";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&sgtl5000>;
+	audio-routing =
+		"MIC_IN", "Mic Jack",
+		"Mic Jack", "Mic Bias",
+		"Headphone Jack", "HP_OUT";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
new file mode 100644
index 0000000000..da84a442cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt
@@ -0,0 +1,36 @@
+Freescale i.MX audio complex with S/PDIF transceiver
+
+Required properties:
+
+  - compatible		: "fsl,imx-audio-spdif"
+
+  - model		: The user-visible name of this sound complex
+
+  - spdif-controller	: The phandle of the i.MX S/PDIF controller
+
+
+Optional properties:
+
+  - spdif-out		: This is a boolean property. If present, the
+			  transmitting function of S/PDIF will be enabled,
+			  indicating there's a physical S/PDIF out connector
+			  or jack on the board or it's connecting to some
+			  other IP block, such as an HDMI encoder or
+			  display-controller.
+
+  - spdif-in		: This is a boolean property. If present, the receiving
+			  function of S/PDIF will be enabled, indicating there
+			  is a physical S/PDIF in connector/jack on the board.
+
+* Note: At least one of these two properties should be set in the DT binding.
+
+
+Example:
+
+sound-spdif {
+	compatible = "fsl,imx-audio-spdif";
+	model = "imx-spdif";
+	spdif-controller = <&spdif>;
+	spdif-out;
+	spdif-in;
+};
diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.yaml b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
new file mode 100644
index 0000000000..dab45c3106
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/imx-audmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Digital Audio Mux device
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx27-audmux
+          - const: fsl,imx21-audmux
+      - items:
+          - enum:
+              - fsl,imx25-audmux
+              - fsl,imx35-audmux
+              - fsl,imx50-audmux
+              - fsl,imx51-audmux
+              - fsl,imx53-audmux
+              - fsl,imx6q-audmux
+              - fsl,imx6sl-audmux
+              - fsl,imx6sll-audmux
+              - fsl,imx6sx-audmux
+          - const: fsl,imx31-audmux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: audmux
+
+patternProperties:
+  "^mux-[0-9a-z]*$":
+    type: object
+    properties:
+      fsl,audmux-port:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Integer of the audmux port that is configured by this child node
+
+      fsl,port-config:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          List of configuration options for the specific port.
+          For imx31-audmux and above, it is a list of tuples ptcr pdcr.
+          For imx21-audmux it is a list of pcr values.
+
+    required:
+      - fsl,audmux-port
+      - fsl,port-config
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    audmux@21d8000 {
+        compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+        reg = <0x021d8000 0x4000>;
+    };
+  - |
+    audmux@10016000 {
+        compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+        reg = <0x10016000 0x1000>;
+        clocks = <&clks 1>;
+        clock-names = "audmux";
+
+        mux-ssi0 {
+            fsl,audmux-port = <0>;
+            fsl,port-config = <0xcb205000>;
+        };
+
+        mux-pins4 {
+            fsl,audmux-port = <2>;
+            fsl,port-config = <0x00001000>;
+        };
+    };
+  - |
+    #include <dt-bindings/sound/fsl-imx-audmux.h>
+    audmux@21d8000 {
+        compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+        reg = <0x021d8000 0x4000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_audmux>;
+
+        mux-ssi1 {
+            fsl,audmux-port = <0>;
+            fsl,port-config = <
+                IMX_AUDMUX_V2_PTCR_SYN		0
+                IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+                IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+                IMX_AUDMUX_V2_PTCR_TFSDIR	0
+                IMX_AUDMUX_V2_PTCR_TCLKDIR      IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+              >;
+        };
+
+        mux-pins3 {
+            fsl,audmux-port = <2>;
+            fsl,port-config = <
+                IMX_AUDMUX_V2_PTCR_SYN          IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+                0                               IMX_AUDMUX_V2_PDCR_TXRXEN
+              >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
new file mode 100644
index 0000000000..66993d378a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/infineon,peb2466.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon PEB2466 codec
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+  The Infineon PEB2466 codec is a programmable DSP-based four channels codec
+  with filters capabilities.
+
+  The time-slots used by the codec must be set and so, the properties
+  'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+  'dai-tdm-slot-rx-mask' must be present in the sound card node for sub-nodes
+  that involve the codec. The codec uses one 8bit time-slot per channel.
+  'dai-tdm-tdm-slot-with' must be set to 8.
+
+  The PEB2466 codec also supports 28 gpios (signaling pins).
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: infineon,peb2466
+
+  reg:
+    description:
+      SPI device address.
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+  spi-max-frequency:
+    maximum: 8192000
+
+  reset-gpios:
+    description:
+      GPIO used to reset the device.
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Filters coefficients file to load. If this property is omitted, internal
+      filters are disabled.
+
+  '#sound-dai-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@0 {
+            compatible = "infineon,peb2466";
+            reg = <0>;
+            spi-max-frequency = <8192000>;
+            reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+            #sound-dai-cells = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
new file mode 100644
index 0000000000..d15c000f14
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs AC97 / I2S Controller (AIC)
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^audio-controller@'
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4740-i2s
+          - ingenic,jz4760-i2s
+          - ingenic,jz4770-i2s
+          - ingenic,jz4780-i2s
+          - ingenic,x1000-i2s
+      - items:
+          - const: ingenic,jz4725b-i2s
+          - const: ingenic,jz4740-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AIC clock
+      - description: I2S clock
+
+  clock-names:
+    items:
+      - const: aic
+      - const: i2s
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for I2S RX
+      - description: DMA controller phandle and request line for I2S TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    aic: audio-controller@10020000 {
+      compatible = "ingenic,jz4740-i2s";
+      reg = <0x10020000 0x38>;
+
+      #sound-dai-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <18>;
+
+      clocks = <&cgu JZ4740_CLK_AIC>,
+               <&cgu JZ4740_CLK_I2S>;
+      clock-names = "aic", "i2s";
+
+      dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ingenic,codec.yaml b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
new file mode 100644
index 0000000000..b58b90850e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ingenic,codec.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx internal codec
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^audio-codec@.*'
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4770-codec
+          - ingenic,jz4760-codec
+          - ingenic,jz4725b-codec
+          - ingenic,jz4740-codec
+      - items:
+          - const: ingenic,jz4760b-codec
+          - const: ingenic,jz4760-codec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aic
+
+  '#sound-dai-cells':
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    codec: audio-codec@10020080 {
+      compatible = "ingenic,jz4740-codec";
+      reg = <0x10020080 0x8>;
+      #sound-dai-cells = <0>;
+      clocks = <&cgu JZ4740_CLK_AIC>;
+      clock-names = "aic";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/inno-rk3036.txt b/Documentation/devicetree/bindings/sound/inno-rk3036.txt
new file mode 100644
index 0000000000..758de8e275
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/inno-rk3036.txt
@@ -0,0 +1,20 @@
+Inno audio codec for RK3036
+
+Inno audio codec is integrated inside RK3036 SoC.
+
+Required properties:
+- compatible : Should be "rockchip,rk3036-codec".
+- reg : The registers of codec.
+- clock-names : Should be "acodec_pclk".
+- clocks : The clock of codec.
+- rockchip,grf : The phandle of grf device node.
+
+Example:
+
+	acodec: acodec-ana@20030000 {
+		compatible = "rk3036-codec";
+		reg = <0x20030000 0x4000>;
+		rockchip,grf = <&grf>;
+		clock-names = "acodec_pclk";
+		clocks = <&cru ACLK_VCODEC>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
new file mode 100644
index 0000000000..76b6f2cf25
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/intel,keembay-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel KeemBay I2S
+
+maintainers:
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+
+description: |
+ Intel KeemBay I2S
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-i2s
+      - intel,keembay-tdm
+      - intel,keembay-hdmi-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: I2S registers
+      - description: I2S gen configuration
+
+  reg-names:
+    items:
+      - const: i2s-regs
+      - const: i2s_gen_cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: osc
+      - const: apb_clk
+
+  dmas:
+    items:
+      - description: DMA TX channel
+      - description: DMA RX channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     #define KEEM_BAY_PSS_AUX_I2S3
+     #define KEEM_BAY_PSS_I2S3
+     i2s3: i2s@20140000 {
+         compatible = "intel,keembay-i2s";
+         #sound-dai-cells = <0>;
+         reg = <0x20140000 0x200>, /* I2S registers */
+               <0x202a00a4 0x4>; /* I2S gen configuration */
+         reg-names = "i2s-regs", "i2s_gen_cfg";
+         interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+         clock-names = "osc", "apb_clk";
+         clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
+         dmas = <&axi_dma0 29>, <&axi_dma0 33>;
+         dma-names = "tx", "rx";
+     };
diff --git a/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml
new file mode 100644
index 0000000000..b36c35e5da
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/irondevice,sma1303.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Iron Device SMA1303 Audio Amplifier
+
+maintainers:
+  - Kiseok Jo <kiseok.jo@irondevice.com>
+
+description:
+  SMA1303 digital class-D audio amplifier
+  with an integrated boost converter.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - irondevice,sma1303
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        amplifier@1e {
+            compatible = "irondevice,sma1303";
+            reg = <0x1e>;
+            #sound-dai-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
new file mode 100644
index 0000000000..a67b79cbe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/linux,bt-sco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth SCO Audio Codec
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  '#sound-dai-cells':
+    enum:
+      - 0
+
+      # For Wideband PCM
+      - 1
+
+  compatible:
+    enum:
+      - delta,dfbmcs320
+      - linux,bt-sco
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    codec {
+        #sound-dai-cells = <0>;
+        compatible = "linux,bt-sco";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
new file mode 100644
index 0000000000..fe5f0756af
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dummy SPDIF Transmitter
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: linux,spdif-dit
+
+  "#sound-dai-cells":
+    const: 0
+
+  sound-name-prefix: true
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif-out {
+        #sound-dai-cells = <0>;
+        compatible = "linux,spdif-dit";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml
new file mode 100644
index 0000000000..61e8babed4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/loongson,ls-audio-card.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/loongson,ls-audio-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson 7axxx/2kxxx ASoC audio sound card driver
+
+maintainers:
+  - Yingkun Meng <mengyingkun@loongson.cn>
+
+description:
+  The binding describes the sound card present in loongson
+  7axxx/2kxxx platform. The sound card is an ASoC component
+  which uses Loongson I2S controller to transfer the audio data.
+
+properties:
+  compatible:
+    const: loongson,ls-audio-card
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  mclk-fs:
+    $ref: simple-card.yaml#/definitions/mclk-fs
+
+  cpu:
+    description: Holds subnode which indicates cpu dai.
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  codec:
+    description: Holds subnode which indicates codec dai.
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+required:
+  - compatible
+  - model
+  - mclk-fs
+  - cpu
+  - codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "loongson,ls-audio-card";
+        model = "loongson-audio";
+        mclk-fs = <512>;
+
+        cpu {
+            sound-dai = <&i2s>;
+        };
+        codec {
+             sound-dai = <&es8323>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
new file mode 100644
index 0000000000..4193d17d1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/marvell,mmp-sspa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvel SSPA Digital Audio Interface
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^audio-controller(@.*)?$"
+
+  compatible:
+    const: marvell,mmp-sspa
+
+  reg:
+    items:
+      - description: RX block
+      - description: TX block
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Clock for the Audio block
+      - description: I2S bit clock
+
+  clock-names:
+    items:
+      - const: audio
+      - const: bitclk
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        type: object
+        additionalProperties: true
+
+        properties:
+          dai-format:
+            const: i2s
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+
+    audio-controller@d42a0c00 {
+      compatible = "marvell,mmp-sspa";
+      reg = <0xd42a0c00 0x30>,
+            <0xd42a0c80 0x30>;
+      interrupts = <2>;
+      clock-names = "audio", "bitclk";
+      clocks = <&soc_clocks 127>,
+               <&audio_clk 1>;
+      #sound-dai-cells = <0>;
+      dmas = <&adma0 0>, <&adma0 1>;
+      dma-names = "tx", "rx";
+      port {
+        endpoint {
+          remote-endpoint = <&rt5631_0>;
+          dai-format = "i2s";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt b/Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt
new file mode 100644
index 0000000000..2ea85d5be6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt
@@ -0,0 +1,27 @@
+Marvell PXA2xx audio complex
+
+This descriptions matches the AC97 controller found in pxa2xx and pxa3xx series.
+
+Required properties:
+  - compatible: should be one of the following:
+    "marvell,pxa250-ac97"
+    "marvell,pxa270-ac97"
+    "marvell,pxa300-ac97"
+  - reg: device MMIO address space
+  - interrupts: single interrupt generated by AC97 IP
+  - clocks: input clock of the AC97 IP, refer to clock-bindings.txt
+
+Optional properties:
+  - pinctrl-names, pinctrl-0: refer to pinctrl-bindings.txt
+  - reset-gpios: gpio used for AC97 reset, refer to gpio.txt
+
+Example:
+	ac97: sound@40500000 {
+		compatible = "marvell,pxa250-ac97";
+		reg = < 0x40500000 0x1000 >;
+		interrupts = <14>;
+		reset-gpios = <&gpio 113 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = < &pmux_ac97_default >;
+	};
diff --git a/Documentation/devicetree/bindings/sound/max98373.txt b/Documentation/devicetree/bindings/sound/max98373.txt
new file mode 100644
index 0000000000..456cb1c593
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98373.txt
@@ -0,0 +1,40 @@
+Maxim Integrated MAX98373 Speaker Amplifier
+
+This device supports I2C.
+
+Required properties:
+
+ - compatible : "maxim,max98373"
+
+ - reg : the I2C address of the device.
+
+Optional properties:
+
+  - maxim,vmon-slot-no : slot number used to send voltage information
+                   or in inteleave mode this will be used as
+                   interleave slot.
+                   slot range : 0 ~ 15,  Default : 0
+
+  - maxim,imon-slot-no : slot number used to send current information
+                   slot range : 0 ~ 15,  Default : 0
+
+  - maxim,spkfb-slot-no : slot number used to send speaker feedback information
+                   slot range : 0 ~ 15,  Default : 0
+
+  - maxim,interleave-mode : For cases where a single combined channel
+		   for the I/V sense data is not sufficient, the device can also be configured
+		   to share a single data output channel on alternating frames.
+		   In this configuration, the current and voltage data will be frame interleaved
+		   on a single output channel.
+                   Boolean, define to enable the interleave mode, Default : false
+
+Example:
+
+codec: max98373@31 {
+   compatible = "maxim,max98373";
+   reg = <0x31>;
+   maxim,vmon-slot-no = <0>;
+   maxim,imon-slot-no = <1>;
+   maxim,spkfb-slot-no = <2>;
+   maxim,interleave-mode;
+};
diff --git a/Documentation/devicetree/bindings/sound/max9860.txt b/Documentation/devicetree/bindings/sound/max9860.txt
new file mode 100644
index 0000000000..e0d4e95e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max9860.txt
@@ -0,0 +1,28 @@
+MAX9860 Mono Audio Voice Codec
+
+Required properties:
+
+  - compatible : "maxim,max9860"
+
+  - reg : the I2C address of the device
+
+  - AVDD-supply, DVDD-supply and DVDDIO-supply : power supplies for
+    the device, as covered in bindings/regulator/regulator.txt
+
+  - clock-names : Required element: "mclk".
+
+  - clocks : A clock specifier for the clock connected as MCLK.
+
+Examples:
+
+	max9860: max9860@10 {
+		compatible = "maxim,max9860";
+		reg = <0x10>;
+
+		AVDD-supply = <&reg_1v8>;
+		DVDD-supply = <&reg_1v8>;
+		DVDDIO-supply = <&reg_3v0>;
+
+		clock-names = "mclk";
+		clocks = <&pck2>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max9759.yaml b/Documentation/devicetree/bindings/sound/maxim,max9759.yaml
new file mode 100644
index 0000000000..a76ee6a635
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max9759.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max9759.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9759 Speaker Amplifier
+
+maintainers:
+  - Otabek Nazrullaev <otabeknazrullaev1998@gmail.com>
+
+properties:
+  compatible:
+    const: maxim,max9759
+
+  shutdown-gpios:
+    maxItems: 1
+    description: the gpio connected to the shutdown pin
+
+  mute-gpios:
+    maxItems: 1
+    description: the gpio connected to the mute pin
+
+  gain-gpios:
+    maxItems: 2
+    description: the 2 gpios connected to the g1 and g2 pins
+
+required:
+  - compatible
+  - shutdown-gpios
+  - mute-gpios
+  - gain-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    amplifier {
+      compatible = "maxim,max9759";
+      shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+      mute-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+      gain-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>,
+             <&gpio3 25 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98088.txt b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
new file mode 100644
index 0000000000..da764d9133
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98088.txt
@@ -0,0 +1,23 @@
+MAX98088 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible: "maxim,max98088" or "maxim,max98089".
+- reg: The I2C address of the device.
+
+Optional properties:
+
+- clocks: the clock provider of MCLK, see ../clock/clock-bindings.txt section
+  "consumer" for more information.
+- clock-names: must be set to "mclk"
+
+Example:
+
+max98089: codec@10 {
+	compatible = "maxim,max98089";
+	reg = <0x10>;
+	clocks = <&clks IMX6QDL_CLK_CKO2>;
+	clock-names = "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml
new file mode 100644
index 0000000000..65e4c51691
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98090.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98090/MAX98091 audio codecs
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Pins on the device (for linking into audio routes):
+  MIC1, MIC2, DMICL, DMICR, IN1, IN2, IN3, IN4, IN5, IN6, IN12, IN34, IN56,
+  HPL, HPR, SPKL, SPKR, RCVL, RCVR, MICBIAS
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98090
+      - maxim,max98091
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  maxim,dmic-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2500000
+    description:
+      DMIC clock frequency
+
+  maxim,micbias:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 3
+    description: |
+      Micbias voltage applied to the analog mic, valid voltages value are:
+        0 - 2.2v
+        1 - 2.55v
+        2 - 2.4v
+        3 - 2.8v
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@10 {
+            compatible = "maxim,max98090";
+            reg = <0x10>;
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            clocks = <&i2s0 0>;
+            clock-names = "mclk";
+            #sound-dai-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98095.yaml b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml
new file mode 100644
index 0000000000..77544a9e15
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98095.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98095 audio codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98095
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@11 {
+            compatible = "maxim,max98095";
+            reg = <0x11>;
+            clocks = <&i2s0 0>;
+            clock-names = "mclk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98357a.yaml b/Documentation/devicetree/bindings/sound/maxim,max98357a.yaml
new file mode 100644
index 0000000000..83ba8666fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98357a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98357a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98357A/MAX98360A amplifier
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+description:
+  Maxim Integrated MAX98357A/MAX98360A is a digital pulse-code modulation (PCM)
+  input Class D amplifier.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98357a
+      - maxim,max98360a
+
+  '#sound-dai-cells':
+    const: 0
+
+  sdmode-gpios:
+    maxItems: 1
+    description:
+      Chip's SD_MODE pin.  If missing the chip is always on.
+
+  sdmode-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay time for SD_MODE pin changes intended to make I2S clocks ready
+      before SD_MODE is unmuted in order to avoid the speaker pop noise.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    amplifier {
+        compatible = "maxim,max98360a";
+        #sound-dai-cells = <0>;
+        sdmode-gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98371.yaml b/Documentation/devicetree/bindings/sound/maxim,max98371.yaml
new file mode 100644
index 0000000000..14fba34ef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98371.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98371.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX98371 audio codec
+
+maintainers:
+  - anish kumar <yesanishhere@gmail.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: maxim,max98371
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@31 {
+            compatible = "maxim,max98371";
+            reg = <0x31>;
+            #sound-dai-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
new file mode 100644
index 0000000000..deaa6886c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98390 Speaker Amplifier with Integrated Dynamic Speaker Management
+
+maintainers:
+  - Steve Lee <steves.lee@maximintegrated.com>
+
+properties:
+  compatible:
+    const: maxim,max98390
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  maxim,temperature_calib:
+    description: The calculated temperature data was measured while doing the calibration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 65535
+
+  maxim,r0_calib:
+    description: This is r0 calibration data which was measured in factory mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8388607
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max98390: amplifier@38 {
+        compatible = "maxim,max98390";
+        reg = <0x38>;
+        maxim,temperature_calib = <1024>;
+        maxim,r0_calib = <100232>;
+        reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml
new file mode 100644
index 0000000000..23f19a9d2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98504.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98504 class D mono speaker amplifier
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  Maxim Integrated MAX98504 speaker amplifier supports I2C control interface
+  with an IRQ output signal, PCM and PDM digital audio interface (DAI) and a
+  differential analog input.
+
+properties:
+  compatible:
+    const: maxim,max98504
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  DIOVDD-supply: true
+  DVDD-supply: true
+  PVDD-supply: true
+
+  maxim,brownout-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 21
+    default: 0
+    description:
+      PVDD brownout threshold, where values correspond to 2.6V, 2.65V...3.65V
+      voltage range.  Property also enables the PVDD brownout protection.
+
+  maxim,brownout-attenuation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+    description:
+      Brownout attenuation to the speaker gain applied during the "attack hold"
+      and "timed hold" phase, the value must be from 0...6 (dB) range.
+
+  maxim,brownout-attack-hold-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout attack hold phase time in ms, VBATBROWN_ATTK_HOLD, register 0x0018.
+
+  maxim,brownout-timed-hold-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout timed hold phase time in ms, VBATBROWN_TIME_HOLD, register 0x0019.
+
+  maxim,brownout-release-rate-ms:
+    maximum: 255
+    default: 0
+    description:
+      Brownout release phase step time in ms, VBATBROWN_RELEASE, register 0x001A.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        amplifier@31 {
+            compatible = "maxim,max98504";
+            reg = <0x31>;
+
+            DIOVDD-supply = <&ldo3_reg>;
+            DVDD-supply = <&ldo3_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
new file mode 100644
index 0000000000..3f88c7d61e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98520 Speaker Amplifier Driver
+
+maintainers:
+  - George Song <george.song@maximintegrated.com>
+
+properties:
+  compatible:
+    const: maxim,max98520
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max98520: amplifier@38 {
+        compatible = "maxim,max98520";
+        reg = <0x38>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max9867.yaml b/Documentation/devicetree/bindings/sound/maxim,max9867.yaml
new file mode 100644
index 0000000000..0b9a84d33b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max9867.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max9867.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX9867 CODEC
+
+description: |
+  This device supports I2C only.
+  Pins on the device (for linking into audio routes):
+      * LOUT
+      * ROUT
+      * LINL
+      * LINR
+      * MICL
+      * MICR
+      * DMICL
+      * DMICR
+
+maintainers:
+  - Ladislav Michl <ladis@linux-mips.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max9867
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@18 {
+            compatible = "maxim,max9867";
+            #sound-dai-cells = <0>;
+            reg = <0x18>;
+            clocks = <&codec_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98925.yaml b/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
new file mode 100644
index 0000000000..32fd86204a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/maxim,max98925.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98925/MAX98926/MAX98927 speaker amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@maximintegrated.com>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max98925
+      - maxim,max98926
+      - maxim,max98927
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 30
+    default: 0
+    description:
+      Slot number used to send voltage information or in inteleave mode this
+      will be used as interleave slot.
+
+  imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 30
+    default: 0
+    description:
+      Slot number used to send current information.
+
+  maxim,interleave-mode:
+    type: boolean
+    description:
+      When using two MAX9892X in a system it is possible to create ADC data
+      that will overflow the frame size. When enabled, the Digital Audio
+      Interleave mode provides a means to output VMON and IMON data from two
+      devices on a single DOUT line when running smaller frames sizes such as
+      32 BCLKS per LRCLK or 48 BCLKS per LRCLK.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max98927
+    then:
+      properties:
+        vmon-slot-no:
+          minimum: 0
+          maximum: 15
+
+        imon-slot-no:
+          minimum: 0
+          maximum: 15
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        #include <dt-bindings/gpio/gpio.h>
+        audio-codec@3a {
+            compatible = "maxim,max98927";
+            reg = <0x3a>;
+            #sound-dai-cells = <0>;
+
+            pinctrl-0 = <&speaker_default>;
+            pinctrl-names = "default";
+
+            reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+
+            vmon-slot-no = <1>;
+            imon-slot-no = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
new file mode 100644
index 0000000000..398efdfe00
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AFE PCM controller for MT7986
+
+maintainers:
+  - Maso Huang <maso.huang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt7986-afe
+      - items:
+          - enum:
+              - mediatek,mt7981-afe
+              - mediatek,mt7988-afe
+          - const: mediatek,mt7986-afe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    items:
+      - description: audio bus clock
+      - description: audio 26M clock
+      - description: audio intbus clock
+      - description: audio hopping clock
+      - description: audio pll clock
+      - description: mux for pcm_mck
+      - description: audio i2s/pcm mck
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: bus_ck
+      - const: 26m_ck
+      - const: l_ck
+      - const: aud_ck
+      - const: eg2_ck
+      - const: sel
+      - const: i2s_m
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7986-afe
+    then:
+      properties:
+        clocks:
+          items:
+            - description: audio bus clock
+            - description: audio 26M clock
+            - description: audio intbus clock
+            - description: audio hopping clock
+            - description: audio pll clock
+        clock-names:
+          items:
+            - const: bus_ck
+            - const: 26m_ck
+            - const: l_ck
+            - const: aud_ck
+            - const: eg2_ck
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7981-afe
+    then:
+      properties:
+        clocks:
+          items:
+            - description: audio bus clock
+            - description: audio 26M clock
+            - description: audio intbus clock
+            - description: audio hopping clock
+            - description: audio pll clock
+            - description: mux for pcm_mck
+        clock-names:
+          items:
+            - const: bus_ck
+            - const: 26m_ck
+            - const: l_ck
+            - const: aud_ck
+            - const: eg2_ck
+            - const: sel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7988-afe
+    then:
+      properties:
+        clocks:
+          items:
+            - description: audio bus clock
+            - description: audio 26M clock
+            - description: audio intbus clock
+            - description: audio hopping clock
+            - description: audio pll clock
+            - description: mux for pcm_mck
+            - description: audio i2s/pcm mck
+        clock-names:
+          items:
+            - const: bus_ck
+            - const: 26m_ck
+            - const: l_ck
+            - const: aud_ck
+            - const: eg2_ck
+            - const: sel
+            - const: i2s_m
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7986-clk.h>
+
+    afe@11210000 {
+        compatible = "mediatek,mt7986-afe";
+        reg = <0x11210000 0x9000>;
+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_26M_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_L_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_AUD_CK>,
+                 <&infracfg_ao CLK_INFRA_AUD_EG2_CK>;
+        clock-names = "bus_ck",
+                      "26m_ck",
+                      "l_ck",
+                      "aud_ck",
+                      "eg2_ck";
+        assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>,
+                          <&topckgen CLK_TOP_AUD_L_SEL>,
+                          <&topckgen CLK_TOP_A_TUNER_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>,
+                                 <&apmixedsys CLK_APMIXED_APLL2>,
+                                 <&topckgen CLK_TOP_APLL2_D4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
new file mode 100644
index 0000000000..09247ceea3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7986 sound card with WM8960 codec
+
+maintainers:
+  - Maso Huang <maso.huang@mediatek.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7986-wm8960-sound
+
+  platform:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: The phandle of MT7986 platform.
+        maxItems: 1
+    required:
+      - sound-dai
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: The phandle of wm8960 codec.
+        maxItems: 1
+    required:
+      - sound-dai
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - audio-routing
+  - platform
+  - codec
+
+examples:
+  - |
+    sound {
+        compatible = "mediatek,mt7986-wm8960-sound";
+        model = "mt7986-wm8960";
+        audio-routing =
+            "Headphone", "HP_L",
+            "Headphone", "HP_R",
+            "LINPUT1", "AMIC",
+            "RINPUT1", "AMIC";
+
+        platform {
+            sound-dai = <&afe>;
+        };
+
+        codec {
+            sound-dai = <&wm8960>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
new file mode 100644
index 0000000000..90520f8920
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt8188-afe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AFE PCM controller for mt8188
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8188-afe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region for AFE memif.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.yaml for details.
+
+  mediatek,topckgen:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek topckgen controller
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek infracfg controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 26M clock
+      - description: audio pll1 clock
+      - description: audio pll2 clock
+      - description: clock divider for i2si1_mck
+      - description: clock divider for i2si2_mck
+      - description: clock divider for i2so1_mck
+      - description: clock divider for i2so2_mck
+      - description: clock divider for dptx_mck
+      - description: a1sys hoping clock
+      - description: audio intbus clock
+      - description: audio hires clock
+      - description: audio local bus clock
+      - description: mux for dptx_mck
+      - description: mux for i2so1_mck
+      - description: mux for i2so2_mck
+      - description: mux for i2si1_mck
+      - description: mux for i2si2_mck
+      - description: audio 26m clock
+      - description: audio pll1 divide 4
+      - description: audio pll2 divide 4
+      - description: clock divider for iec
+      - description: mux for a2sys clock
+      - description: mux for aud_iec
+
+  clock-names:
+    items:
+      - const: clk26m
+      - const: apll1
+      - const: apll2
+      - const: apll12_div0
+      - const: apll12_div1
+      - const: apll12_div2
+      - const: apll12_div3
+      - const: apll12_div9
+      - const: top_a1sys_hp
+      - const: top_aud_intbus
+      - const: top_audio_h
+      - const: top_audio_local_bus
+      - const: top_dptx
+      - const: top_i2so1
+      - const: top_i2so2
+      - const: top_i2si1
+      - const: top_i2si2
+      - const: adsp_audio_26m
+      - const: apll1_d4
+      - const: apll2_d4
+      - const: apll12_div4
+      - const: top_a2sys
+      - const: top_aud_iec
+
+  mediatek,etdm-in1-cowork-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm in module.
+    enum:
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+  mediatek,etdm-in2-cowork-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm in module.
+    enum:
+      - 0 # etdm1_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+  mediatek,etdm-out1-cowork-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm out module.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 3 # etdm2_out
+
+  mediatek,etdm-out2-cowork-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm out module.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+
+patternProperties:
+  "^mediatek,etdm-in[1-2]-chn-disabled$":
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 16
+    description:
+      This is a list of channel IDs which should be disabled.
+      By default, all data received from ETDM pins will be outputted to
+      memory. etdm in supports disable_out in direct mode(w/o interconn),
+      so user can disable the specified channels by the property.
+    uniqueItems: true
+    items:
+      minimum: 0
+      maximum: 15
+
+  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,topckgen
+  - mediatek,infracfg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    afe@10b10000 {
+        compatible = "mediatek,mt8188-afe";
+        reg = <0x10b10000 0x10000>;
+        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+        resets = <&watchdog 14>;
+        reset-names = "audiosys";
+        memory-region = <&snd_dma_mem_reserved>;
+        mediatek,topckgen = <&topckgen>;
+        mediatek,infracfg = <&infracfg_ao>;
+        power-domains = <&spm 13>; //MT8188_POWER_DOMAIN_AUDIO
+        mediatek,etdm-in2-cowork-source = <2>;
+        mediatek,etdm-out2-cowork-source = <0>;
+        mediatek,etdm-in1-multi-pin-mode;
+        mediatek,etdm-in1-chn-disabled = /bits/ 8 <0x0 0x2>;
+        clocks = <&clk26m>,
+                 <&apmixedsys 9>, //CLK_APMIXED_APLL1
+                 <&apmixedsys 10>, //CLK_APMIXED_APLL2
+                 <&topckgen 186>, //CLK_TOP_APLL12_CK_DIV0
+                 <&topckgen 187>, //CLK_TOP_APLL12_CK_DIV1
+                 <&topckgen 188>, //CLK_TOP_APLL12_CK_DIV2
+                 <&topckgen 189>, //CLK_TOP_APLL12_CK_DIV3
+                 <&topckgen 191>, //CLK_TOP_APLL12_CK_DIV9
+                 <&topckgen 83>, //CLK_TOP_A1SYS_HP
+                 <&topckgen 31>, //CLK_TOP_AUD_INTBUS
+                 <&topckgen 32>, //CLK_TOP_AUDIO_H
+                 <&topckgen 69>, //CLK_TOP_AUDIO_LOCAL_BUS
+                 <&topckgen 81>, //CLK_TOP_DPTX
+                 <&topckgen 77>, //CLK_TOP_I2SO1
+                 <&topckgen 78>, //CLK_TOP_I2SO2
+                 <&topckgen 79>, //CLK_TOP_I2SI1
+                 <&topckgen 80>, //CLK_TOP_I2SI2
+                 <&adsp_audio26m 0>, //CLK_AUDIODSP_AUDIO26M
+                 <&topckgen 132>, //CLK_TOP_APLL1_D4
+                 <&topckgen 133>, //CLK_TOP_APLL2_D4
+                 <&topckgen 183>, //CLK_TOP_APLL12_CK_DIV4
+                 <&topckgen 84>, //CLK_TOP_A2SYS
+                 <&topckgen 82>; //CLK_TOP_AUD_IEC>;
+        clock-names = "clk26m",
+                      "apll1",
+                      "apll2",
+                      "apll12_div0",
+                      "apll12_div1",
+                      "apll12_div2",
+                      "apll12_div3",
+                      "apll12_div9",
+                      "top_a1sys_hp",
+                      "top_aud_intbus",
+                      "top_audio_h",
+                      "top_audio_local_bus",
+                      "top_dptx",
+                      "top_i2so1",
+                      "top_i2so2",
+                      "top_i2si1",
+                      "top_i2si2",
+                      "adsp_audio_26m",
+                      "apll1_d4",
+                      "apll2_d4",
+                      "apll12_div4",
+                      "top_a2sys",
+                      "top_aud_iec";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
new file mode 100644
index 0000000000..43b3b67bdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-mt6359.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mediatek,mt8188-mt6359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8188 ASoC sound card
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-mt6359-evb
+      - mediatek,mt8188-nau8825
+
+  audio-routing:
+    description:
+      Valid names could be the input or output widgets of audio components,
+      power supplies, MicBias of codec and the software switch.
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8188 ASoC platform.
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    description:
+      Container for dai-link level properties and CODEC sub-nodes.
+
+    properties:
+      link-name:
+        description:
+          This property corresponds to the name of the BE dai-link to which
+          we are going to update parameters in this node.
+        items:
+          enum:
+            - DPTX_BE
+            - ETDM1_IN_BE
+            - ETDM2_IN_BE
+            - ETDM1_OUT_BE
+            - ETDM2_OUT_BE
+            - ETDM3_OUT_BE
+            - PCM1_BE
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 2
+        required:
+          - sound-dai
+
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+
+      mediatek,clk-provider:
+        $ref: /schemas/types.yaml#/definitions/string
+        description: Indicates dai-link clock master.
+        items:
+          enum:
+            - cpu
+            - codec
+
+    additionalProperties: false
+
+    required:
+      - link-name
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+
+examples:
+  - |
+    sound {
+        compatible = "mediatek,mt8188-mt6359-evb";
+        model = "MT6359-EVB";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+        audio-routing =
+            "Headphone", "Headphone L",
+            "Headphone", "Headphone R",
+            "AIN1", "Headset Mic";
+        dai-link-0 {
+            link-name = "ETDM3_OUT_BE";
+            dai-format = "i2s";
+            mediatek,clk-provider = "cpu";
+            codec {
+                sound-dai = <&hdmi0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
new file mode 100644
index 0000000000..651f61c7c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-i2smcc.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,sama7g5-i2smcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip I2S Multi-Channel Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and
+  supports a Time Division Multiplexed (TDM) interface with external
+  multi-channel audio codecs. It consists of a receiver, a transmitter and a
+  common clock generator that can be enabled separately to provide Adapter,
+  Client or Controller modes with receiver and/or transmitter active.
+  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S
+  multi-channel is supported by using multiple data pins, output and
+  input, without TDM.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - microchip,sam9x60-i2smcc
+      - microchip,sama7g5-i2smcc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock (Optional). Should be set mostly when Master
+          Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  microchip,tdm-data-pair:
+    description:
+      Represents the DIN/DOUT pair pins that are used to receive/send
+      TDM data. It is optional and it is only needed if the controller
+      uses the TDM mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1, 2, 3]
+    default: 0
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: microchip,sam9x60-i2smcc
+    then:
+      properties:
+        microchip,tdm-data-pair: false
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f001c000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sam9x60-i2smcc";
+        reg = <0xf001c000 0x100>;
+        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                       AT91_XDMAC_DT_PERID(36))>,
+               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                       AT91_XDMAC_DT_PERID(37))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s_clk>, <&i2s_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
new file mode 100644
index 0000000000..9aa65c975c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-pdmc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,sama7g5-pdmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Pulse Density Microphone Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Pulse Density Microphone Controller (PDMC) interfaces up to 4
+  digital microphones having Pulse Density Modulated (PDM) outputs.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: microchip,sama7g5-pdmc
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  microchip,mic-pos:
+    description: |
+      Position of PDM microphones on the DS line and the sampling edge (rising
+      or falling) of the CLK line. A microphone is represented as a pair of DS
+      line and the sampling edge. The first microphone is mapped to channel 0,
+      the second to channel 1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: value for DS line
+          enum: [0, 1]
+        - description: value for sampling edge
+          enum: [0, 1]
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+
+  microchip,startup-delay-us:
+    description: |
+      Specifies the delay in microseconds that needs to be applied after
+      enabling the PDMC microphones to avoid unwanted noise due to microphones
+      not being ready.
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - microchip,mic-pos
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/sound/microchip,pdmc.h>
+
+    pdmc: sound@e1608000 {
+        compatible = "microchip,sama7g5-pdmc";
+        reg = <0xe1608000 0x4000>;
+        #sound-dai-cells = <0>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+        clock-names = "pclk", "gclk";
+        microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>,
+                            <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>,
+                            <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>,
+                            <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml
new file mode 100644
index 0000000000..2f43c684ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdifrx.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,sama7g5-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Rx Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Sony/Philips Digital Interface Receiver is a serial port
+  compliant with the IEC-60958 standard.
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdifrx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdifrx: spdifrx@e1614000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdifrx";
+        reg = <0xe1614000 0x4000>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+        clock-names = "pclk", "gclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml
new file mode 100644
index 0000000000..4702c52870
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/microchip,sama7g5-spdiftx.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,sama7g5-spdiftx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip S/PDIF Tx Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Sony/Philips Digital Interface Transmitter is a serial port
+  compliant with the IEC-60958 standard.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    const: microchip,sama7g5-spdiftx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: TX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spdiftx@e1618000 {
+        #sound-dai-cells = <0>;
+        compatible = "microchip,sama7g5-spdiftx";
+        reg = <0xe1618000 0x4000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+        dma-names = "tx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spdiftx_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
new file mode 100644
index 0000000000..912f8fae11
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mikroe,mikroe-proto.txt
@@ -0,0 +1,23 @@
+Mikroe-PROTO audio board
+
+Required properties:
+  - compatible: "mikroe,mikroe-proto"
+  - dai-format: Must be "i2s".
+  - i2s-controller: The phandle of the I2S controller.
+  - audio-codec: The phandle of the WM8731 audio codec.
+Optional properties:
+  - model: The user-visible name of this sound complex.
+  - bitclock-master: Indicates dai-link bit clock master; for details see simple-card.txt (1).
+  - frame-master: Indicates dai-link frame master; for details see simple-card.txt (1).
+
+(1) : There must be the same master for both bit and frame clocks.
+
+Example:
+	sound {
+		compatible = "mikroe,mikroe-proto";
+		model = "wm8731 @ sama5d2_xplained";
+		i2s-controller = <&i2s0>;
+		audio-codec = <&wm8731>;
+		dai-format = "i2s";
+        };
+};
diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
new file mode 100644
index 0000000000..feef39b4a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
@@ -0,0 +1,34 @@
+Marvell PXA SSP CPU DAI bindings
+
+Required properties:
+
+	compatible	Must be "mrvl,pxa-ssp-dai"
+	port		A phandle reference to a PXA ssp upstream device
+
+Optional properties:
+
+	clock-names
+	clocks		Through "clock-names" and "clocks", external clocks
+			can be configured. If a clock names "extclk" exists,
+			it will be set to the mclk rate of the audio stream
+			and be used as clock provider of the DAI.
+
+Example:
+
+	/* upstream device */
+
+	ssp1: ssp@41000000 {
+		compatible = "mrvl,pxa3xx-ssp";
+		reg = <0x41000000 0x40>;
+		interrupts = <24>;
+		clock-names = "pxa27x-ssp.0";
+	};
+
+	/* DAI as user */
+
+	ssp_dai0: ssp_dai@0 {
+		compatible = "mrvl,pxa-ssp-dai";
+		port = <&ssp1>;
+		#sound-dai-cells = <0>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
new file mode 100644
index 0000000000..f548e6a582
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt
@@ -0,0 +1,146 @@
+Mediatek AFE PCM controller for mt2701
+
+Required properties:
+- compatible: should be one of the following.
+	      - "mediatek,mt2701-audio"
+	      - "mediatek,mt7622-audio"
+- interrupts: should contain AFE and ASYS interrupts
+- interrupt-names: should be "afe" and "asys"
+- power-domains: should define the power domain
+- clocks: Must contain an entry for each entry in clock-names
+  See ../clocks/clock-bindings.txt for details
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"top_audio_mux1_sel",
+		"top_audio_mux2_sel",
+		"top_audio_a1sys_hp",
+		"top_audio_a2sys_hp",
+		"i2s0_src_sel",
+		"i2s1_src_sel",
+		"i2s2_src_sel",
+		"i2s3_src_sel",
+		"i2s0_src_div",
+		"i2s1_src_div",
+		"i2s2_src_div",
+		"i2s3_src_div",
+		"i2s0_mclk_en",
+		"i2s1_mclk_en",
+		"i2s2_mclk_en",
+		"i2s3_mclk_en",
+		"i2so0_hop_ck",
+		"i2so1_hop_ck",
+		"i2so2_hop_ck",
+		"i2so3_hop_ck",
+		"i2si0_hop_ck",
+		"i2si1_hop_ck",
+		"i2si2_hop_ck",
+		"i2si3_hop_ck",
+		"asrc0_out_ck",
+		"asrc1_out_ck",
+		"asrc2_out_ck",
+		"asrc3_out_ck",
+		"audio_afe_pd",
+		"audio_afe_conn_pd",
+		"audio_a1sys_pd",
+		"audio_a2sys_pd",
+		"audio_mrgif_pd";
+- assigned-clocks: list of input clocks and dividers for the audio system.
+		   See ../clocks/clock-bindings.txt for details.
+- assigned-clocks-parents: parent of input clocks of assigned clocks.
+- assigned-clock-rates: list of clock frequencies of assigned clocks.
+
+Must be a subnode of MediaTek audsys device tree node.
+See ../arm/mediatek/mediatek,audsys.txt for details about the parent node.
+
+Example:
+
+	audsys: audio-subsystem@11220000 {
+		compatible = "mediatek,mt2701-audsys", "syscon";
+		...
+
+		afe: audio-controller {
+			compatible = "mediatek,mt2701-audio";
+			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names	= "afe", "asys";
+			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+				 <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+				 <&topckgen CLK_TOP_AUD_48K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_44K_TIMING>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
+				 <&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
+				 <&topckgen CLK_TOP_AUD_I2S1_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S2_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S3_MCLK>,
+				 <&topckgen CLK_TOP_AUD_I2S4_MCLK>,
+				 <&audsys CLK_AUD_I2SO1>,
+				 <&audsys CLK_AUD_I2SO2>,
+				 <&audsys CLK_AUD_I2SO3>,
+				 <&audsys CLK_AUD_I2SO4>,
+				 <&audsys CLK_AUD_I2SIN1>,
+				 <&audsys CLK_AUD_I2SIN2>,
+				 <&audsys CLK_AUD_I2SIN3>,
+				 <&audsys CLK_AUD_I2SIN4>,
+				 <&audsys CLK_AUD_ASRCO1>,
+				 <&audsys CLK_AUD_ASRCO2>,
+				 <&audsys CLK_AUD_ASRCO3>,
+				 <&audsys CLK_AUD_ASRCO4>,
+				 <&audsys CLK_AUD_AFE>,
+				 <&audsys CLK_AUD_AFE_CONN>,
+				 <&audsys CLK_AUD_A1SYS>,
+				 <&audsys CLK_AUD_A2SYS>,
+				 <&audsys CLK_AUD_AFE_MRGIF>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd",
+				      "audio_mrgif_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX2_SEL>,
+					  <&topckgen CLK_TOP_AUD_MUX1_DIV>,
+					  <&topckgen CLK_TOP_AUD_MUX2_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
+						 <&topckgen CLK_TOP_AUD2PLL_90M>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt b/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt
new file mode 100644
index 0000000000..05574446ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt2701-cs42448.txt
@@ -0,0 +1,43 @@
+MT2701 with CS42448 CODEC
+
+Required properties:
+- compatible: "mediatek,mt2701-cs42448-machine"
+- mediatek,platform: the phandle of MT2701 ASoC platform
+- audio-routing: a list of the connections between audio
+- mediatek,audio-codec: the phandles of cs42448 codec
+- mediatek,audio-codec-bt-mrg the phandles of bt-sco dummy codec
+- pinctrl-names: Should contain only one value - "default"
+- pinctrl-0: Should specify pin control groups used for this controller.
+- i2s1-in-sel-gpio1, i2s1-in-sel-gpio2: Should specify two gpio pins to
+					control I2S1-in mux.
+
+Example:
+
+	sound:sound {
+		compatible = "mediatek,mt2701-cs42448-machine";
+		mediatek,platform = <&afe>;
+		/* CS42448 Machine name */
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "AMIC",
+			"AIN1R", "AMIC",
+			"AIN2L", "Tuner In",
+			"AIN2R", "Tuner In",
+			"AIN3L", "Satellite Tuner In",
+			"AIN3R", "Satellite Tuner In",
+			"AIN3L", "AUX In",
+			"AIN3R", "AUX In";
+		mediatek,audio-codec = <&cs42448>;
+		mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_pins_default>;
+		i2s1-in-sel-gpio1 = <&pio 53 0>;
+		i2s1-in-sel-gpio2 = <&pio 54 0>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt2701-wm8960.txt b/Documentation/devicetree/bindings/sound/mt2701-wm8960.txt
new file mode 100644
index 0000000000..809b609ea9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt2701-wm8960.txt
@@ -0,0 +1,24 @@
+MT2701 with WM8960 CODEC
+
+Required properties:
+- compatible: "mediatek,mt2701-wm8960-machine"
+- mediatek,platform: the phandle of MT2701 ASoC platform
+- audio-routing: a list of the connections between audio
+- mediatek,audio-codec: the phandles of wm8960 codec
+- pinctrl-names: Should contain only one value - "default"
+- pinctrl-0: Should specify pin control groups used for this controller.
+
+Example:
+
+	sound:sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_pins_default>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt6351.txt b/Documentation/devicetree/bindings/sound/mt6351.txt
new file mode 100644
index 0000000000..7fb2cb9924
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6351.txt
@@ -0,0 +1,16 @@
+Mediatek MT6351 Audio Codec
+
+The communication between MT6351 and SoC is through Mediatek PMIC wrapper.
+For more detail, please visit Mediatek PMIC wrapper documentation.
+
+Must be a child node of PMIC wrapper.
+
+Required properties:
+
+- compatible : "mediatek,mt6351-sound".
+
+Example:
+
+mt6351_snd {
+	compatible = "mediatek,mt6351-sound";
+};
diff --git a/Documentation/devicetree/bindings/sound/mt6358.txt b/Documentation/devicetree/bindings/sound/mt6358.txt
new file mode 100644
index 0000000000..fbe9e55c68
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6358.txt
@@ -0,0 +1,26 @@
+Mediatek MT6358 Audio Codec
+
+The communication between MT6358 and SoC is through Mediatek PMIC wrapper.
+For more detail, please visit Mediatek PMIC wrapper documentation.
+
+Must be a child node of PMIC wrapper.
+
+Required properties:
+
+- compatible - "string" - One of:
+    "mediatek,mt6358-sound"
+    "mediatek,mt6366-sound"
+- Avdd-supply : power source of AVDD
+
+Optional properties:
+- mediatek,dmic-mode : Indicates how many data pins are used to transmit two
+	channels of PDM signal. 0 means two wires, 1 means one wire. Default
+	value is 0.
+
+Example:
+
+mt6358_snd {
+	compatible = "mediatek,mt6358-sound";
+	Avdd-supply = <&mt6358_vaud28_reg>;
+	mediatek,dmic-mode = <0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/mt6359.yaml b/Documentation/devicetree/bindings/sound/mt6359.yaml
new file mode 100644
index 0000000000..23d411fc42
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt6359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6359 Codec
+
+maintainers:
+  - Eason Yen <eason.yen@mediatek.com>
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+description: |
+  The communication between MT6359 and SoC is through Mediatek PMIC wrapper.
+  For more detail, please visit Mediatek PMIC wrapper documentation.
+  Must be a child node of PMIC wrapper.
+
+properties:
+  mediatek,dmic-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Indicates how many data pins are used to transmit two channels of PDM
+      signal. 0 means two wires, 1 means one wire. Default value is 0.
+    enum:
+      - 0 # one wire
+      - 1 # two wires
+
+  mediatek,mic-type-0:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc0
+
+    enum:
+      - 0 # IDLE - mic in turn-off status
+      - 1 # ACC - analog mic with alternating coupling
+      - 2 # DMIC - digital mic
+      - 3 # DCC - analog mic with direct couping
+      - 4 # DCC_ECM_DIFF - analog electret condenser mic with differential mode
+      - 5 # DCC_ECM_SINGLE - analog electret condenser mic with single mode
+
+  mediatek,mic-type-1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc1
+
+  mediatek,mic-type-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specifies the type of mic type connected to adc2
+
+additionalProperties: false
+
+examples:
+  - |
+    mt6359codec: mt6359codec {
+      mediatek,dmic-mode = <0>;
+      mediatek,mic-type-0 = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt
new file mode 100644
index 0000000000..0ae29de15b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6797-afe-pcm.txt
@@ -0,0 +1,42 @@
+Mediatek AFE PCM controller for mt6797
+
+Required properties:
+- compatible = "mediatek,mt6797-audio";
+- reg: register location and size
+- interrupts: should contain AFE interrupt
+- power-domains: should define the power domain
+- clocks: Must contain an entry for each entry in clock-names
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"infra_sys_audio_26m",
+		"mtkaif_26m_clk",
+		"top_mux_audio",
+		"top_mux_aud_intbus",
+		"top_sys_pll3_d4",
+		"top_sys_pll1_d4",
+		"top_clk26m_clk";
+
+Example:
+
+	afe: mt6797-afe-pcm@11220000  {
+		compatible = "mediatek,mt6797-audio";
+		reg = <0 0x11220000 0 0x1000>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT6797_POWER_DOMAIN_AUDIO>;
+		clocks = <&infrasys CLK_INFRA_AUDIO>,
+			 <&infrasys CLK_INFRA_AUDIO_26M>,
+			 <&infrasys CLK_INFRA_AUDIO_26M_PAD_TOP>,
+			 <&topckgen CLK_TOP_MUX_AUDIO>,
+			 <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+			 <&topckgen CLK_TOP_SYSPLL3_D4>,
+			 <&topckgen CLK_TOP_SYSPLL1_D4>,
+			 <&clk26m>;
+		clock-names = "infra_sys_audio_clk",
+			      "infra_sys_audio_26m",
+			      "mtkaif_26m_clk",
+			      "top_mux_audio",
+			      "top_mux_aud_intbus",
+			      "top_sys_pll3_d4",
+			      "top_sys_pll1_d4",
+			      "top_clk26m_clk";
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt b/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt
new file mode 100644
index 0000000000..1d95a8840f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt6797-mt6351.txt
@@ -0,0 +1,14 @@
+MT6797 with MT6351 CODEC
+
+Required properties:
+- compatible: "mediatek,mt6797-mt6351-sound"
+- mediatek,platform: the phandle of MT6797 ASoC platform
+- mediatek,audio-codec: the phandles of MT6351 codec
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt6797-mt6351-sound";
+		mediatek,audio-codec = <&mt6351_snd>;
+		mediatek,platform = <&afe>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt
new file mode 100644
index 0000000000..519e97c8f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8173-max98090.txt
@@ -0,0 +1,15 @@
+MT8173 with MAX98090 CODEC
+
+Required properties:
+- compatible : "mediatek,mt8173-max98090"
+- mediatek,audio-codec: the phandle of the MAX98090 audio codec
+- mediatek,platform: the phandle of MT8173 ASoC platform
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8173-max98090";
+		mediatek,audio-codec = <&max98090>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5514.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5514.txt
new file mode 100644
index 0000000000..e8b3c80c6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5514.txt
@@ -0,0 +1,15 @@
+MT8173 with RT5650 RT5514 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8173-rt5650-rt5514"
+- mediatek,audio-codec: the phandles of rt5650 and rt5514 codecs
+- mediatek,platform: the phandle of MT8173 ASoC platform
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8173-rt5650-rt5514";
+		mediatek,audio-codec = <&rt5650 &rt5514>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
new file mode 100644
index 0000000000..ac28cdb491
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt
@@ -0,0 +1,16 @@
+MT8173 with RT5650 RT5676 CODECS and HDMI via I2S
+
+Required properties:
+- compatible : "mediatek,mt8173-rt5650-rt5676"
+- mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs
+			and of the hdmi encoder node
+- mediatek,platform: the phandle of MT8173 ASoC platform
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8173-rt5650-rt5676";
+		mediatek,audio-codec = <&rt5650 &rt5676 &hdmi0>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
new file mode 100644
index 0000000000..29dce2ac87
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8173-rt5650.txt
@@ -0,0 +1,31 @@
+MT8173 with RT5650 CODECS and HDMI via I2S
+
+Required properties:
+- compatible : "mediatek,mt8173-rt5650"
+- mediatek,audio-codec: the phandles of rt5650 codecs
+                        and of the hdmi encoder node
+- mediatek,platform: the phandle of MT8173 ASoC platform
+
+Optional subnodes:
+- codec-capture : the subnode of rt5650 codec capture
+Required codec-capture subnode properties:
+- sound-dai: audio codec dai name on capture path
+  <&rt5650 0> : Default setting. Connect rt5650 I2S1 for capture. (dai_name = rt5645-aif1)
+  <&rt5650 1> : Connect rt5650 I2S2 for capture. (dai_name = rt5645-aif2)
+
+- mediatek,mclk: the MCLK source
+  0 : external oscillator, MCLK = 12.288M
+  1 : internal source from mt8173, MCLK = sampling rate*256
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8173-rt5650";
+		mediatek,audio-codec = <&rt5650 &hdmi0>;
+		mediatek,platform = <&afe>;
+		mediatek,mclk = <0>;
+		codec-capture {
+			sound-dai = <&rt5650 1>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt
new file mode 100644
index 0000000000..1f1cba4152
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt
@@ -0,0 +1,42 @@
+Mediatek AFE PCM controller for mt8183
+
+Required properties:
+- compatible = "mediatek,mt68183-audio";
+- reg: register location and size
+- interrupts: should contain AFE interrupt
+- resets: Must contain an entry for each entry in reset-names
+  See ../reset/reset.txt for details.
+- reset-names: should have these reset names:
+		"audiosys";
+- power-domains: should define the power domain
+- clocks: Must contain an entry for each entry in clock-names
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"mtkaif_26m_clk",
+		"top_mux_audio",
+		"top_mux_aud_intbus",
+		"top_sys_pll3_d4",
+		"top_clk26m_clk";
+
+Example:
+
+	afe: mt8183-afe-pcm@11220000  {
+		compatible = "mediatek,mt8183-audio";
+		reg = <0 0x11220000 0 0x1000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+		resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>;
+		reset-names = "audiosys";
+		power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>;
+		clocks = <&infrasys CLK_INFRA_AUDIO>,
+			 <&infrasys CLK_INFRA_AUDIO_26M_BCLK>,
+			 <&topckgen CLK_TOP_MUX_AUDIO>,
+			 <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+			 <&topckgen CLK_TOP_SYSPLL_D2_D4>,
+			 <&clk26m>;
+		clock-names = "infra_sys_audio_clk",
+			      "mtkaif_26m_clk",
+			      "top_mux_audio",
+			      "top_mux_aud_intbus",
+			      "top_sys_pll_d2_d4",
+			      "top_clk26m_clk";
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
new file mode 100644
index 0000000000..f276dfc74b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
@@ -0,0 +1,21 @@
+MT8183 with MT6358, DA7219, MAX98357, and RT1015 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8183_da7219_max98357" for MAX98357A codec
+               "mediatek,mt8183_da7219_rt1015" for RT1015 codec
+               "mediatek,mt8183_da7219_rt1015p" for RT1015P codec
+- mediatek,headset-codec: the phandles of da7219 codecs
+- mediatek,platform: the phandle of MT8183 ASoC platform
+
+Optional properties:
+- mediatek,hdmi-codec: the phandles of HDMI codec
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8183_da7219_max98357";
+		mediatek,headset-codec = <&da7219>;
+		mediatek,hdmi-codec = <&it6505dptx>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
new file mode 100644
index 0000000000..ecd46ed8eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -0,0 +1,25 @@
+MT8183 with MT6358, TS3A227, MAX98357, and RT1015 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8183_mt6358_ts3a227_max98357" for MAX98357A codec
+               "mediatek,mt8183_mt6358_ts3a227_max98357b" for MAX98357B codec
+               "mediatek,mt8183_mt6358_ts3a227_rt1015" for RT1015 codec
+               "mediatek,mt8183_mt6358_ts3a227_rt1015p" for RT1015P codec
+- mediatek,platform: the phandle of MT8183 ASoC platform
+
+Optional properties:
+- mediatek,headset-codec: the phandles of ts3a227 codecs
+- mediatek,ec-codec: the phandle of EC codecs.
+                     See google,cros-ec-codec.txt for more details.
+- mediatek,hdmi-codec: the phandles of HDMI codec
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+		mediatek,headset-codec = <&ts3a227>;
+		mediatek,ec-codec = <&ec_codec>;
+		mediatek,hdmi-codec = <&it6505dptx>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
new file mode 100644
index 0000000000..7fe85b08f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8186
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8186-sound
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  mediatek,apmixedsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek apmixedsys controller
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek infracfg controller
+
+  mediatek,topckgen:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek topckgen controller
+
+  clocks:
+    items:
+      - description: audio infra sys clock
+      - description: audio infra 26M clock
+      - description: audio top mux
+      - description: audio intbus mux
+      - description: mainpll 136.5M clock
+      - description: faud1 mux
+      - description: apll1 clock
+      - description: faud2 mux
+      - description: apll2 clock
+      - description: audio engen1 mux
+      - description: apll1_d8 22.5792M clock
+      - description: audio engen2 mux
+      - description: apll2_d8 24.576M clock
+      - description: i2s0 mclk mux
+      - description: i2s1 mclk mux
+      - description: i2s2 mclk mux
+      - description: i2s4 mclk mux
+      - description: tdm mclk mux
+      - description: i2s0_mck divider
+      - description: i2s1_mck divider
+      - description: i2s2_mck divider
+      - description: i2s4_mck divider
+      - description: tdm_mck divider
+      - description: audio hires mux
+      - description: 26M clock
+
+  clock-names:
+    items:
+      - const: aud_infra_clk
+      - const: mtkaif_26m_clk
+      - const: top_mux_audio
+      - const: top_mux_audio_int
+      - const: top_mainpll_d2_d4
+      - const: top_mux_aud_1
+      - const: top_apll1_ck
+      - const: top_mux_aud_2
+      - const: top_apll2_ck
+      - const: top_mux_aud_eng1
+      - const: top_apll1_d8
+      - const: top_mux_aud_eng2
+      - const: top_apll2_d8
+      - const: top_i2s0_m_sel
+      - const: top_i2s1_m_sel
+      - const: top_i2s2_m_sel
+      - const: top_i2s4_m_sel
+      - const: top_tdm_m_sel
+      - const: top_apll12_div0
+      - const: top_apll12_div1
+      - const: top_apll12_div2
+      - const: top_apll12_div4
+      - const: top_apll12_div_tdm
+      - const: top_mux_audio_h
+      - const: top_clk26m_clk
+
+required:
+  - compatible
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,apmixedsys
+  - mediatek,infracfg
+  - mediatek,topckgen
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    afe: mt8186-afe-pcm@11210000 {
+        compatible = "mediatek,mt8186-sound";
+        reg = <0x11210000 0x2000>;
+        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&watchdog 17>; //MT8186_TOPRGU_AUDIO_SW_RST
+        reset-names = "audiosys";
+        mediatek,apmixedsys = <&apmixedsys>;
+        mediatek,infracfg = <&infracfg>;
+        mediatek,topckgen = <&topckgen>;
+        clocks = <&infracfg_ao 44>, //CLK_INFRA_AO_AUDIO
+                 <&infracfg_ao 54>, //CLK_INFRA_AO_AUDIO_26M_BCLK
+                 <&topckgen 15>, //CLK_TOP_AUDIO
+                 <&topckgen 16>, //CLK_TOP_AUD_INTBUS
+                 <&topckgen 70>, //CLK_TOP_MAINPLL_D2_D4
+                 <&topckgen 17>, //CLK_TOP_AUD_1
+                 <&apmixedsys 12>, //CLK_APMIXED_APLL1
+                 <&topckgen 18>, //CLK_TOP_AUD_2
+                 <&apmixedsys 13>, //CLK_APMIXED_APLL2
+                 <&topckgen 19>, //CLK_TOP_AUD_ENGEN1
+                 <&topckgen 101>, //CLK_TOP_APLL1_D8
+                 <&topckgen 20>, //CLK_TOP_AUD_ENGEN2
+                 <&topckgen 104>, //CLK_TOP_APLL2_D8
+                 <&topckgen 63>, //CLK_TOP_APLL_I2S0_MCK_SEL
+                 <&topckgen 64>, //CLK_TOP_APLL_I2S1_MCK_SEL
+                 <&topckgen 65>, //CLK_TOP_APLL_I2S2_MCK_SEL
+                 <&topckgen 66>, //CLK_TOP_APLL_I2S4_MCK_SEL
+                 <&topckgen 67>, //CLK_TOP_APLL_TDMOUT_MCK_SEL
+                 <&topckgen 131>, //CLK_TOP_APLL12_CK_DIV0
+                 <&topckgen 132>, //CLK_TOP_APLL12_CK_DIV1
+                 <&topckgen 133>, //CLK_TOP_APLL12_CK_DIV2
+                 <&topckgen 134>, //CLK_TOP_APLL12_CK_DIV4
+                 <&topckgen 135>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_M
+                 <&topckgen 44>, //CLK_TOP_AUDIO_H
+                 <&clk26m>;
+        clock-names = "aud_infra_clk",
+                      "mtkaif_26m_clk",
+                      "top_mux_audio",
+                      "top_mux_audio_int",
+                      "top_mainpll_d2_d4",
+                      "top_mux_aud_1",
+                      "top_apll1_ck",
+                      "top_mux_aud_2",
+                      "top_apll2_ck",
+                      "top_mux_aud_eng1",
+                      "top_apll1_d8",
+                      "top_mux_aud_eng2",
+                      "top_apll2_d8",
+                      "top_i2s0_m_sel",
+                      "top_i2s1_m_sel",
+                      "top_i2s2_m_sel",
+                      "top_i2s4_m_sel",
+                      "top_tdm_m_sel",
+                      "top_apll12_div0",
+                      "top_apll12_div1",
+                      "top_apll12_div2",
+                      "top_apll12_div4",
+                      "top_apll12_div_tdm",
+                      "top_mux_audio_h",
+                      "top_clk26m_clk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
new file mode 100644
index 0000000000..9853c11a13
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-mt6366-da7219-max98357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 with MT6366, DA7219 and MAX98357 ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+description:
+  This binding describes the MT8186 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-mt6366-da7219-max98357-sound
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ASoC platform.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  playback-codecs:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        items:
+          - description: phandle of dp codec
+          - description: phandle of l channel speaker codec
+          - description: phandle of r channel speaker codec
+        minItems: 2
+    required:
+      - sound-dai
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - playback-codecs
+
+examples:
+  - |
+
+    sound: mt8186-sound {
+        compatible = "mediatek,mt8186-mt6366-da7219-max98357-sound";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&da7219>;
+        };
+
+        playback-codecs {
+            sound-dai = <&anx_bridge_dp>,
+                        <&max98357a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
new file mode 100644
index 0000000000..d80083df03
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-mt6366-rt1019-rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 with MT6366, RT1019 and RT5682S ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+description:
+  This binding describes the MT8186 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-mt6366-rt1019-rt5682s-sound
+      - mediatek,mt8186-mt6366-rt5682s-max98360-sound
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ASoC platform.
+
+  dmic-gpios:
+    maxItems: 1
+    description:
+      dmic-gpios optional prop for switching between two DMICs.
+      Ex, the GPIO can control a MUX HW component to select
+      dmic clk and data form a Front or Rear dmic.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  playback-codecs:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        items:
+          - description: phandle of dp codec
+          - description: phandle of l channel speaker codec
+          - description: phandle of r channel speaker codec
+        minItems: 2
+    required:
+      - sound-dai
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - playback-codecs
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound: mt8186-sound {
+        compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on",
+                        "aud_gpio_dmic_sec";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+        pinctrl-2 = <&aud_gpio_dmic_sec>;
+
+        dmic-gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
+
+        headset-codec {
+            sound-dai = <&rt5682s>;
+        };
+
+        playback-codecs {
+             sound-dai = <&it6505dptx>,
+                         <&rt1019p>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
new file mode 100644
index 0000000000..064ef172be
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8192-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8192
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8192-audio
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  mediatek,apmixedsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek apmixedsys controller
+
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek infracfg controller
+
+  mediatek,topckgen:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AFE clock
+      - description: ADDA DAC clock
+      - description: ADDA DAC pre-distortion clock
+      - description: audio infra sys clock
+      - description: audio infra 26M clock
+
+  clock-names:
+    items:
+      - const: aud_afe_clk
+      - const: aud_dac_clk
+      - const: aud_dac_predis_clk
+      - const: aud_infra_clk
+      - const: aud_infra_26m_clk
+
+required:
+  - compatible
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,apmixedsys
+  - mediatek,infracfg
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/reset/mt8192-resets.h>
+
+    afe: mt8192-afe-pcm {
+        compatible = "mediatek,mt8192-audio";
+        interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&watchdog MT8192_TOPRGU_AUDIO_SW_RST>;
+        reset-names = "audiosys";
+        mediatek,apmixedsys = <&apmixedsys>;
+        mediatek,infracfg = <&infracfg>;
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&scpsys MT8192_POWER_DOMAIN_AUDIO>;
+        clocks = <&audsys CLK_AUD_AFE>,
+                 <&audsys CLK_AUD_DAC>,
+                 <&audsys CLK_AUD_DAC_PREDIS>,
+                 <&infracfg CLK_INFRA_AUDIO>,
+                 <&infracfg CLK_INFRA_AUDIO_26M_B>;
+        clock-names = "aud_afe_clk",
+                      "aud_dac_clk",
+                      "aud_dac_predis_clk",
+                      "aud_infra_clk",
+                      "aud_infra_26m_clk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
new file mode 100644
index 0000000000..7e50f5d65c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8192-mt6359-rt1015-rt5682.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8192 with MT6359, RT1015 and RT5682 ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+description:
+  This binding describes the MT8192 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192_mt6359_rt1015_rt5682
+      - mediatek,mt8192_mt6359_rt1015p_rt5682
+      - mediatek,mt8192_mt6359_rt1015p_rt5682s
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8192 ASoC platform.
+
+  mediatek,hdmi-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of HDMI codec.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  speaker-codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      sound-dai:
+        minItems: 1
+        maxItems: 2
+        items:
+          maxItems: 1
+    required:
+      - sound-dai
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - speaker-codecs
+
+examples:
+  - |
+
+    sound: mt8192-sound {
+        compatible = "mediatek,mt8192_mt6359_rt1015_rt5682";
+        mediatek,platform = <&afe>;
+        mediatek,hdmi-codec = <&anx_bridge_dp>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&rt5682>;
+        };
+
+        speaker-codecs {
+            sound-dai = <&rt1015_l>,
+                        <&rt1015_r>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
new file mode 100644
index 0000000000..5c8dba2b3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8195
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8195-audio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region for AFE memif.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+  mediatek,topckgen:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 26M clock
+      - description: audio pll1 clock
+      - description: audio pll2 clock
+      - description: clock divider for i2si1_mck
+      - description: clock divider for i2si2_mck
+      - description: clock divider for i2so1_mck
+      - description: clock divider for i2so2_mck
+      - description: clock divider for dptx_mck
+      - description: a1sys hoping clock
+      - description: audio intbus clock
+      - description: audio hires clock
+      - description: audio local bus clock
+      - description: mux for dptx_mck
+      - description: mux for i2so1_mck
+      - description: mux for i2so2_mck
+      - description: mux for i2si1_mck
+      - description: mux for i2si2_mck
+      - description: audio infra 26M clock
+      - description: infra bus clock
+
+  clock-names:
+    items:
+      - const: clk26m
+      - const: apll1_ck
+      - const: apll2_ck
+      - const: apll12_div0
+      - const: apll12_div1
+      - const: apll12_div2
+      - const: apll12_div3
+      - const: apll12_div9
+      - const: a1sys_hp_sel
+      - const: aud_intbus_sel
+      - const: audio_h_sel
+      - const: audio_local_bus_sel
+      - const: dptx_m_sel
+      - const: i2so1_m_sel
+      - const: i2so2_m_sel
+      - const: i2si1_m_sel
+      - const: i2si2_m_sel
+      - const: infra_ao_audio_26m_b
+      - const: scp_adsp_audiodsp
+
+  mediatek,etdm-in1-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 24
+    description: Specify which input channel should be disabled.
+
+  mediatek,etdm-in2-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 16
+    description: Specify which input channel should be disabled.
+
+patternProperties:
+  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
+    description: Specify etdm in mclk output rate for always on case.
+
+  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
+    description: Specify etdm out mclk output rate for always on case.
+
+  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-in[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm in module.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+  "^mediatek,etdm-out[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm out module.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    afe: mt8195-afe-pcm@10890000 {
+        compatible = "mediatek,mt8195-audio";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+        resets = <&watchdog 14>;
+        reset-names = "audiosys";
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
+        memory-region = <&snd_dma_mem_reserved>;
+        clocks = <&clk26m>,
+                 <&topckgen 163>, //CLK_TOP_APLL1
+                 <&topckgen 166>, //CLK_TOP_APLL2
+                 <&topckgen 233>, //CLK_TOP_APLL12_DIV0
+                 <&topckgen 234>, //CLK_TOP_APLL12_DIV1
+                 <&topckgen 235>, //CLK_TOP_APLL12_DIV2
+                 <&topckgen 236>, //CLK_TOP_APLL12_DIV3
+                 <&topckgen 238>, //CLK_TOP_APLL12_DIV9
+                 <&topckgen 100>, //CLK_TOP_A1SYS_HP_SEL
+                 <&topckgen 33>, //CLK_TOP_AUD_INTBUS_SEL
+                 <&topckgen 34>, //CLK_TOP_AUDIO_H_SEL
+                 <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS_SEL
+                 <&topckgen 98>, //CLK_TOP_DPTX_M_SEL
+                 <&topckgen 94>, //CLK_TOP_I2SO1_M_SEL
+                 <&topckgen 95>, //CLK_TOP_I2SO2_M_SEL
+                 <&topckgen 96>, //CLK_TOP_I2SI1_M_SEL
+                 <&topckgen 97>, //CLK_TOP_I2SI2_M_SEL
+                 <&infracfg_ao 50>, //CLK_INFRA_AO_AUDIO_26M_B
+                 <&scp_adsp 0>; //CLK_SCP_ADSP_AUDIODSP
+        clock-names = "clk26m",
+                      "apll1_ck",
+                      "apll2_ck",
+                      "apll12_div0",
+                      "apll12_div1",
+                      "apll12_div2",
+                      "apll12_div3",
+                      "apll12_div9",
+                      "a1sys_hp_sel",
+                      "aud_intbus_sel",
+                      "audio_h_sel",
+                      "audio_local_bus_sel",
+                      "dptx_m_sel",
+                      "i2so1_m_sel",
+                      "i2so2_m_sel",
+                      "i2si1_m_sel",
+                      "i2si2_m_sel",
+                      "infra_ao_audio_26m_b",
+                      "scp_adsp_audiodsp";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
new file mode 100644
index 0000000000..c1ddbf672c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8195 ASoC sound card driver
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+description:
+  This binding describes the MT8195 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195_mt6359_rt1019_rt5682
+      - mediatek,mt8195_mt6359_rt1011_rt5682
+      - mediatek,mt8195_mt6359_max98390_rt5682
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  mediatek,platform:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8195 ASoC platform.
+
+  mediatek,dptx-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8195 Display Port Tx codec node.
+
+  mediatek,hdmi-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8195 HDMI codec node.
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8195 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+
+examples:
+  - |
+
+    sound: mt8195-sound {
+        compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt
new file mode 100644
index 0000000000..e302c7f43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt
@@ -0,0 +1,45 @@
+Mediatek AFE PCM controller
+
+Required properties:
+- compatible = "mediatek,mt8173-afe-pcm";
+- reg: register location and size
+- interrupts: Should contain AFE interrupt
+- clock-names: should have these clock names:
+		"infra_sys_audio_clk",
+		"top_pdn_audio",
+		"top_pdn_aud_intbus",
+		"bck0",
+		"bck1",
+		"i2s0_m",
+		"i2s1_m",
+		"i2s2_m",
+		"i2s3_m",
+		"i2s3_b";
+
+Example:
+
+	afe: mt8173-afe-pcm@11220000  {
+		compatible = "mediatek,mt8173-afe-pcm";
+		reg = <0 0x11220000 0 0x1000>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&infracfg INFRA_AUDIO>,
+			<&topckgen TOP_AUDIO_SEL>,
+			<&topckgen TOP_AUD_INTBUS_SEL>,
+			<&topckgen TOP_APLL1_DIV0>,
+			<&topckgen TOP_APLL2_DIV0>,
+			<&topckgen TOP_I2S0_M_CK_SEL>,
+			<&topckgen TOP_I2S1_M_CK_SEL>,
+			<&topckgen TOP_I2S2_M_CK_SEL>,
+			<&topckgen TOP_I2S3_M_CK_SEL>,
+			<&topckgen TOP_I2S3_B_CK_SEL>;
+		clock-names = "infra_sys_audio_clk",
+				"top_pdn_audio",
+				"top_pdn_aud_intbus",
+				"bck0",
+				"bck1",
+				"i2s0_m",
+				"i2s1_m",
+				"i2s2_m",
+				"i2s3_m",
+				"i2s3_b";
+	};
diff --git a/Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt b/Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt
new file mode 100644
index 0000000000..679e44839b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mtk-btcvsd-snd.txt
@@ -0,0 +1,24 @@
+Mediatek ALSA BT SCO CVSD/MSBC Driver
+
+Required properties:
+- compatible = "mediatek,mtk-btcvsd-snd";
+- reg: register location and size of PKV and SRAM_BANK2
+- interrupts: should contain BTSCO interrupt
+- mediatek,infracfg: the phandles of INFRASYS
+- mediatek,offset: Array contains of register offset and mask
+    infra_misc_offset,
+    infra_conn_bt_cvsd_mask,
+    cvsd_mcu_read_offset,
+    cvsd_mcu_write_offset,
+    cvsd_packet_indicator_offset
+
+Example:
+
+	mtk-btcvsd-snd@18000000 {
+		compatible = "mediatek,mtk-btcvsd-snd";
+		reg=<0 0x18000000 0 0x1000>,
+		    <0 0x18080000 0 0x8000>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>;
+		mediatek,infracfg = <&infrasys>;
+		mediatek,offset = <0xf00 0x800 0xfd0 0xfd4 0xfd8>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/mvebu-audio.txt b/Documentation/devicetree/bindings/sound/mvebu-audio.txt
new file mode 100644
index 0000000000..4f5dec5cb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mvebu-audio.txt
@@ -0,0 +1,46 @@
+* mvebu (Kirkwood, Dove, Armada 370) audio controller
+
+Required properties:
+
+- compatible:
+  "marvell,kirkwood-audio" for Kirkwood platforms
+  "marvell,dove-audio" for Dove platforms
+  "marvell,armada370-audio" for Armada 370 platforms
+  "marvell,armada-380-audio" for Armada 38x platforms
+
+- reg: physical base address of the controller and length of memory mapped
+  region (named "i2s_regs").
+  With "marvell,armada-380-audio" two other regions are required:
+  first of those is dedicated for Audio PLL Configuration registers
+  (named "pll_regs") and the second one ("soc_ctrl") - for register
+  where one of exceptive I/O types (I2S or S/PDIF) is set.
+
+- interrupts:
+  with "marvell,kirkwood-audio", the audio interrupt
+  with "marvell,dove-audio", a list of two interrupts, the first for
+  the data flow, and the second for errors.
+
+- clocks: one or two phandles.
+  The first one is mandatory and defines the internal clock.
+  The second one is optional and defines an external clock.
+
+- clock-names: names associated to the clocks:
+	"internal" for the internal clock
+	"extclk" for the external clock
+
+Optional properties:
+
+- spdif-mode:
+  Enable S/PDIF mode on Armada 38x SoC. Using this property
+  disables standard I2S I/O. Valid only with "marvell,armada-380-audio"
+  compatible string.
+
+Example:
+
+i2s1: audio-controller@b4000 {
+	compatible = "marvell,dove-audio";
+	reg = <0xb4000 0x2210>;
+	interrupts = <21>, <22>;
+	clocks = <&gate_clk 13>;
+	clock-names = "internal";
+};
diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt
new file mode 100644
index 0000000000..4eb980bd02
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt
@@ -0,0 +1,42 @@
+* Freescale MXS audio complex with SGTL5000 codec
+
+Required properties:
+- compatible		: "fsl,mxs-audio-sgtl5000"
+- model			: The user-visible name of this sound complex
+- saif-controllers	: The phandle list of the MXS SAIF controller
+- audio-codec		: The phandle of the SGTL5000 audio codec
+- audio-routing		: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, SGTL5000
+			  pins, and the jacks on the board:
+
+			  Power supplies:
+			   * Mic Bias
+
+			  SGTL5000 pins:
+			   * MIC_IN
+			   * LINE_IN
+			   * HP_OUT
+			   * LINE_OUT
+
+			  Board connectors:
+			   * Mic Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Line Out Jack
+			   * Ext Spk
+
+Example:
+
+sound {
+	compatible = "fsl,imx28-evk-sgtl5000",
+		     "fsl,mxs-audio-sgtl5000";
+	model = "imx28-evk-sgtl5000";
+	saif-controllers = <&saif0 &saif1>;
+	audio-codec = <&sgtl5000>;
+	audio-routing =
+		"MIC_IN", "Mic Jack",
+		"Mic Jack", "Mic Bias",
+		"Headphone Jack", "HP_OUT";
+};
diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt
new file mode 100644
index 0000000000..7ba07a118e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt
@@ -0,0 +1,41 @@
+* Freescale MXS Serial Audio Interface (SAIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-saif"
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR interrupt number
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+  and SAIF DMA channel ID.
+  Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
+
+Optional properties:
+- fsl,saif-master: phandle to the master SAIF.  It's only required for
+  the slave SAIF.
+
+Note: Each SAIF controller should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+
+aliases {
+	saif0 = &saif0;
+	saif1 = &saif1;
+};
+
+saif0: saif@80042000 {
+	compatible = "fsl,imx28-saif";
+	reg = <0x80042000 2000>;
+	interrupts = <59>;
+	dmas = <&dma_apbx 4>;
+	dma-names = "rx-tx";
+};
+
+saif1: saif@80046000 {
+	compatible = "fsl,imx28-saif";
+	reg = <0x80046000 2000>;
+	interrupts = <58>;
+	dmas = <&dma_apbx 5>;
+	dma-names = "rx-tx";
+	fsl,saif-master = <&saif0>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nokia,rx51.txt b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
new file mode 100644
index 0000000000..72f93d9962
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nokia,rx51.txt
@@ -0,0 +1,27 @@
+* Nokia N900 audio setup
+
+Required properties:
+- compatible: Should contain "nokia,n900-audio"
+- nokia,cpu-dai: phandle for the McBSP node
+- nokia,audio-codec: phandles for the main TLV320AIC3X node and the
+                     auxiliary TLV320AIC3X node (in this order)
+- nokia,headphone-amplifier: phandle for the TPA6130A2 node
+- tvout-selection-gpios: GPIO for tvout selection
+- jack-detection-gpios: GPIO for jack detection
+- eci-switch-gpios: GPIO for ECI (Enhancement Control Interface) switch
+- speaker-amplifier-gpios: GPIO for speaker amplifier
+
+Example:
+
+sound {
+	compatible = "nokia,n900-audio";
+
+	nokia,cpu-dai = <&mcbsp2>;
+	nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+	nokia,headphone-amplifier = <&tpa6130a2>;
+
+	tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+	jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+	eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+	speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml
new file mode 100644
index 0000000000..24006e9dc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8315.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8315.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8315/NAU8318 Mono Class-D Amplifier
+
+maintainers:
+  - David Lin <CTLIN0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8315
+      - nuvoton,nau8318
+
+  '#sound-dai-cells':
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the chip's device enable input(EN) pin.
+      If this option is not specified then driver does not manage
+      the pin state (e.g. chip is always on).
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    codec {
+        compatible = "nuvoton,nau8315";
+        #sound-dai-cells = <0>;
+        enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
new file mode 100644
index 0000000000..7ccfbb8d8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton Technology Corporation NAU85L40 Audio CODEC
+
+maintainers:
+  - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8540
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1c {
+            compatible = "nuvoton,nau8540";
+            reg = <0x1c>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
new file mode 100644
index 0000000000..d9696f6c75
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8810/NAU8812/NAU8814 audio CODEC
+
+maintainers:
+  - David Lin <CTLIN0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8810
+      - nuvoton,nau8812
+      - nuvoton,nau8814
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "nuvoton,nau8810";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
new file mode 100644
index 0000000000..3e54abd4ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU88L21 audio codec
+
+maintainers:
+  - Seven Lee <wtli@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,nau8821
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,jkdet-enable:
+    description: Enable jack detection via JKDET pin.
+    type: boolean
+
+  nuvoton,jkdet-pull-enable:
+    description: Enable JKDET pin pull. If set - pin pull enabled,
+      otherwise pin in high impedance state.
+    type: boolean
+
+  nuvoton,jkdet-pull-up:
+    description: Pull-up JKDET pin. If set then JKDET pin is pull up,
+      otherwise pull down.
+    type: boolean
+
+  nuvoton,key-enable:
+    description: handles key press detection.
+    type: boolean
+
+  nuvoton,jkdet-polarity:
+    description: JKDET pin polarity.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # active high
+      - 1 # active low
+    default: 1
+
+  nuvoton,micbias-voltage:
+    description: MICBIAS output level select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA * 1
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,vref-impedance:
+    description: VMID Tie-off impedance select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # open
+      - 1 # 25KOhms
+      - 2 # 125KOhms
+      - 3 # 2.5KOhms
+    default: 2
+
+  nuvoton,jack-insert-debounce:
+    description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 7
+
+  nuvoton,jack-eject-debounce:
+    description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 7
+    default: 0
+
+  nuvoton,dmic-clk-threshold:
+    description: DMIC clock speed expected value. Unit is Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3072000
+
+  nuvoton,left-input-single-end:
+    description: Enable left input with single-ended settings if set.
+        For the headset mic application, the single-ended control is
+        just limited to the left adc for design demand.
+    type: boolean
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1b {
+            compatible = "nuvoton,nau8821";
+            reg = <0x1b>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+            nuvoton,jkdet-enable;
+            nuvoton,jkdet-pull-enable;
+            nuvoton,jkdet-pull-up;
+            nuvoton,key-enable;
+            nuvoton,left-input-single-end;
+            nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+            nuvoton,micbias-voltage = <6>;
+            nuvoton,vref-impedance = <2>;
+            nuvoton,jack-insert-debounce = <7>;
+            nuvoton,jack-eject-debounce = <0>;
+            nuvoton,dmic-clk-threshold = <3072000>;
+            #sound-dai-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml
new file mode 100644
index 0000000000..cb8182bbc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8822.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8822.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8822 audio CODEC
+
+description: |
+  24 bit stereo audio codec with speaker driver.
+  This device supports I2C/SPI.
+
+maintainers:
+  - David Lin <CTLIN0@nuvoton.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8822
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  nuvoton,spk-btl:
+    description:
+      If set, configure the two loudspeaker outputs as a Bridge Tied Load output
+      to drive a high power external loudspeaker.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "nuvoton,nau8822";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml
new file mode 100644
index 0000000000..3dbf438c38
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8824.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8824.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8824 audio CODEC
+
+maintainers:
+  - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8824
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,jkdet-polarity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      JKDET pin polarity.
+    enum:
+      - 0 # active high
+      - 1 # active low
+    default: 1
+
+  nuvoton,vref-impedance:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      VREF Impedance selection.
+    enum:
+      - 0 # Open
+      - 1 # 25 kOhm
+      - 2 # 125 kOhm
+      - 3 # 2.5 kOhm
+    default: 2
+
+  nuvoton,micbias-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Micbias voltage level.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-threshold-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of buttons supported.
+    minimum: 1
+    maximum: 8
+    default: 4
+
+  nuvoton,sar-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Impedance threshold for each button. Array that contains up to 8 buttons
+      configuration. SAR value is calculated as
+      SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
+      configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
+      'nuvoton,sar-voltage', R - button impedance.
+      Refer datasheet section 10.2 for more information about threshold
+      calculation.
+    minItems: 1
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 255
+
+  nuvoton,sar-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button impedance measurement hysteresis.
+    default: 0
+
+  nuvoton,sar-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Reference voltage for button impedance measurement.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-compare-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR compare time.
+    enum:
+      - 0 # 500ns
+      - 1 # 1us
+      - 2 # 2us
+      - 3 # 4us
+    default: 1
+
+  nuvoton,sar-sampling-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR sampling time.
+    enum:
+      - 0 # 2us
+      - 1 # 4us
+      - 2 # 8us
+      - 3 # 16us
+    default: 1
+
+  nuvoton,short-key-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button short key press debounce time.
+    enum:
+      - 0 # 30 ms
+      - 1 # 50 ms
+      - 2 # 100 ms
+    default: 0
+
+  nuvoton,jack-eject-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Jack ejection debounce time.
+    enum:
+      - 0 # 0 ms
+      - 1 # 1 ms
+      - 2 # 10 ms
+    default: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "nuvoton,nau8824";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio>;
+            interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+            nuvoton,vref-impedance = <2>;
+            nuvoton,micbias-voltage = <6>;
+            nuvoton,sar-threshold-num = <4>;
+            // Setup 4 buttons impedance according to Android specification
+            nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+            nuvoton,sar-hysteresis = <0>;
+            nuvoton,sar-voltage = <6>;
+            nuvoton,sar-compare-time = <1>;
+            nuvoton,sar-sampling-time = <1>;
+            nuvoton,short-key-debounce = <0>;
+            nuvoton,jack-eject-debounce = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml
new file mode 100644
index 0000000000..a54f194a0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8825.yaml
@@ -0,0 +1,239 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8825.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU8825 audio CODEC
+
+maintainers:
+  - John Hsu <KCHSU0@nuvoton.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nau8825
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nuvoton,jkdet-enable:
+    description:
+      Enable jack detection via JKDET pin.
+    type: boolean
+
+  nuvoton,jkdet-pull-enable:
+    description:
+      Enable JKDET pin pull.
+      If set - pin pull enabled, otherwise pin in high impedance state.
+    type: boolean
+
+  nuvoton,jkdet-pull-up:
+    description:
+      Pull-up JKDET pin.
+      If set then JKDET pin is pull up, otherwise pull down.
+    type: boolean
+
+  nuvoton,jkdet-polarity:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      JKDET pin polarity.
+    enum:
+      - 0 # active high
+      - 1 # active low
+    default: 1
+
+  nuvoton,vref-impedance:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      VREF Impedance selection.
+    enum:
+      - 0 # Open
+      - 1 # 25 kOhm
+      - 2 # 125 kOhm
+      - 3 # 2.5 kOhm
+    default: 2
+
+  nuvoton,micbias-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Micbias voltage level.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-threshold-num:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of buttons supported.
+    minimum: 1
+    maximum: 4
+    default: 4
+
+  nuvoton,sar-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Impedance threshold for each button. Array that contains up to 8 buttons
+      configuration. SAR value is calculated as
+      SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) where MICBIAS is
+      configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by
+      'nuvoton,sar-voltage', R - button impedance.
+      Refer datasheet section 10.2 for more information about threshold
+      calculation.
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 255
+
+  nuvoton,sar-hysteresis:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button impedance measurement hysteresis.
+    default: 0
+
+  nuvoton,sar-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Reference voltage for button impedance measurement.
+    enum:
+      - 0 # VDDA
+      - 1 # VDDA
+      - 2 # VDDA * 1.1
+      - 3 # VDDA * 1.2
+      - 4 # VDDA * 1.3
+      - 5 # VDDA * 1.4
+      - 6 # VDDA * 1.53
+      - 7 # VDDA * 1.53
+    default: 6
+
+  nuvoton,sar-compare-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR compare time.
+    enum:
+      - 0 # 500 ns
+      - 1 # 1 us
+      - 2 # 2 us
+      - 3 # 4 us
+    default: 1
+
+  nuvoton,sar-sampling-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SAR sampling time.
+    enum:
+      - 0 # 2 us
+      - 1 # 4 us
+      - 2 # 8 us
+      - 3 # 16 us
+    default: 1
+
+  nuvoton,short-key-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Button short key press debounce time.
+    enum:
+      - 0 # 30 ms
+      - 1 # 50 ms
+      - 2 # 100 ms
+      - 3 # 30 ms
+    default: 3
+
+  nuvoton,jack-insert-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number from 0 to 7 that sets debounce time to 2^(n+2) ms.
+    maximum: 7
+    default: 7
+
+  nuvoton,jack-eject-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number from 0 to 7 that sets debounce time to 2^(n+2) ms
+    maximum: 7
+    default: 0
+
+  nuvoton,crosstalk-enable:
+    description:
+      make crosstalk function enable if set.
+    type: boolean
+
+  nuvoton,adcout-drive-strong:
+    description:
+      make the drive strength of ADCOUT IO PIN strong if set.
+      Otherwise, the drive keeps normal strength.
+    type: boolean
+
+  nuvoton,adc-delay-ms:
+    description:
+      Delay (in ms) to make input path stable and avoid pop noise.
+      The default value is 125 and range between 125 to 500 ms.
+    minimum: 125
+    maximum: 500
+    default: 125
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "nuvoton,nau8825";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio>;
+            interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+            nuvoton,jkdet-enable;
+            nuvoton,jkdet-pull-enable;
+            nuvoton,jkdet-pull-up;
+            nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+            nuvoton,vref-impedance = <2>;
+            nuvoton,micbias-voltage = <6>;
+            // Setup 4 buttons impedance according to Android specification
+            nuvoton,sar-threshold-num = <4>;
+            nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+            nuvoton,sar-hysteresis = <1>;
+            nuvoton,sar-voltage = <0>;
+            nuvoton,sar-compare-time = <0>;
+            nuvoton,sar-sampling-time = <0>;
+            nuvoton,short-key-debounce = <2>;
+            nuvoton,jack-insert-debounce = <7>;
+            nuvoton,jack-eject-debounce = <7>;
+            nuvoton,crosstalk-enable;
+
+            clock-names = "mclk";
+            clocks = <&tegra_pmc 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml
new file mode 100644
index 0000000000..96f2f927a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-alc5632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with ALC5632 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-alc5632(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-alc5632
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headset Stereophone
+        - Int Spk
+        - Headset Mic
+        - Digital Mic
+
+        # CODEC Pins
+        - SPKOUT
+        - SPKOUTN
+        - MICBIAS1
+        - MIC1
+        - HPR
+        - HPL
+        - DMICDAT
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-alc5632-paz00",
+                     "nvidia,tegra-audio-alc5632";
+
+        nvidia,model = "Compal PAZ00";
+
+        nvidia,audio-routing = "Int Spk", "SPKOUT",
+                               "Int Spk", "SPKOUTN",
+                               "Headset Mic", "MICBIAS1",
+                               "MIC1", "Headset Mic",
+                               "Headset Stereophone", "HPR",
+                               "Headset Stereophone", "HPL",
+                               "DMICDAT", "Digital Mic";
+
+        nvidia,i2s-controller = <&i2s>;
+        nvidia,audio-codec = <&codec>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
new file mode 100644
index 0000000000..2588589ad6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for NVIDIA Tegra audio complexes
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  clocks:
+    items:
+      - description: PLL A clock
+      - description: PLL A OUT0 clock
+      - description: The Tegra cdev1/extern1 clock, which feeds the card's mclk
+
+  clock-names:
+    items:
+      - const: pll_a
+      - const: pll_a_out0
+      - const: mclk
+
+  nvidia,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+
+  nvidia,ac97-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the AC97 controller
+
+  nvidia,i2s-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the Tegra I2S controller
+
+  nvidia,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of audio codec
+
+  nvidia,spkr-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the speakers
+
+  nvidia,hp-mute-gpios:
+    maxItems: 1
+    description: The GPIO that mutes the headphones
+
+  nvidia,hp-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect headphones are plugged in
+
+  nvidia,mic-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect microphone is plugged in
+
+  nvidia,ear-sel-gpios:
+    maxItems: 1
+    description: The GPIO that switch between the microphones
+
+  nvidia,int-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the internal microphone
+
+  nvidia,ext-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the external microphone
+
+  nvidia,headset:
+    type: boolean
+    description: The Mic Jack represents state of the headset microphone pin
+
+  nvidia,coupled-mic-hp-det:
+    type: boolean
+    description: The Mic detect GPIO is viable only if HP detect GPIO is active
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
new file mode 100644
index 0000000000..b4bee466d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph based Tegra sound card driver
+
+description: |
+  This is based on generic audio graph card driver along with additional
+  customizations for Tegra platforms. It uses the same bindings with
+  additional standard clock DT bindings required for Tegra.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: audio-graph.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra210-audio-graph-card
+      - nvidia,tegra186-audio-graph-card
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: pll_a
+      - const: plla_out0
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 3
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 3
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 3
+
+  interconnects:
+    items:
+      - description: APE read memory client
+      - description: APE write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+required:
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    tegra_sound {
+        compatible = "nvidia,tegra210-audio-graph-card";
+
+        clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+                 <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        clock-names = "pll_a", "plla_out0";
+
+        assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+                          <&tegra_car TEGRA210_CLK_PLL_A_OUT0>,
+                          <&tegra_car TEGRA210_CLK_EXTERN1>;
+        assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <368640000>, <49152000>, <12288000>;
+
+        dais = /* FE */
+               <&admaif1_port>,
+               /* Router */
+               <&xbar_i2s1_port>,
+               /* I/O DAP Ports */
+               <&i2s1_port>;
+
+        label = "jetson-tx1-ape";
+    };
+
+    // The ports are defined for AHUB and its child devices.
+    ahub@702d0800 {
+        compatible = "nvidia,tegra210-ahub";
+        reg = <0x702d0800 0x800>;
+        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        clock-names = "ahub";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x702d0000 0x702d0000 0x0000e400>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0x0>;
+                xbar_admaif1_ep: endpoint {
+                    remote-endpoint = <&admaif1_ep>;
+                };
+            };
+
+            // ...
+
+            xbar_i2s1_port: port@a {
+                reg = <0xa>;
+                xbar_i2s1_ep: endpoint {
+                    remote-endpoint = <&i2s1_cif_ep>;
+                };
+            };
+        };
+
+        admaif@702d0000 {
+            compatible = "nvidia,tegra210-admaif";
+            reg = <0x702d0000 0x800>;
+            dmas = <&adma 1>,  <&adma 1>,
+                   <&adma 2>,  <&adma 2>,
+                   <&adma 3>,  <&adma 3>,
+                   <&adma 4>,  <&adma 4>,
+                   <&adma 5>,  <&adma 5>,
+                   <&adma 6>,  <&adma 6>,
+                   <&adma 7>,  <&adma 7>,
+                   <&adma 8>,  <&adma 8>,
+                   <&adma 9>,  <&adma 9>,
+                   <&adma 10>, <&adma 10>;
+            dma-names = "rx1",  "tx1",
+                        "rx2",  "tx2",
+                        "rx3",  "tx3",
+                        "rx4",  "tx4",
+                        "rx5",  "tx5",
+                        "rx6",  "tx6",
+                        "rx7",  "tx7",
+                        "rx8",  "tx8",
+                        "rx9",  "tx9",
+                        "rx10", "tx10";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                admaif1_port: port@0 {
+                    reg = <0x0>;
+                    admaif1_ep: endpoint {
+                        remote-endpoint = <&xbar_admaif1_ep>;
+                    };
+                };
+
+                // More ADMAIF ports to follow
+            };
+        };
+
+        i2s@702d1000 {
+            compatible = "nvidia,tegra210-i2s";
+            clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            clock-names = "i2s";
+            assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+            assigned-clock-rates = <1536000>;
+            reg = <0x702d1000 0x100>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0x0>;
+
+                    i2s1_cif_ep: endpoint {
+                        remote-endpoint = <&xbar_i2s1_ep>;
+                    };
+                };
+
+                i2s1_port: port@1 {
+                    reg = <0x1>;
+
+                    i2s1_dap: endpoint {
+                        dai-format = "i2s";
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml
new file mode 100644
index 0000000000..c29d794291
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max9808x.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-max9808x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with MAX9808x CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-max98088(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-max98088
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-max98089(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-max98089
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Int Spk
+        - Headphone Jack
+        - Earpiece
+        - Headset Mic
+        - Internal Mic 1
+        - Internal Mic 2
+
+        # CODEC Pins
+        - HPL
+        - HPR
+        - SPKL
+        - SPKR
+        - RECL
+        - RECR
+        - INA1
+        - INA2
+        - INB1
+        - INB2
+        - MIC1
+        - MIC2
+        - MICBIAS
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+    #include <dt-bindings/soc/tegra-pmc.h>
+    sound {
+        compatible = "lge,tegra-audio-max98089-p895",
+                     "nvidia,tegra-audio-max98089";
+        nvidia,model = "LG Optimus Vu MAX98089";
+
+        nvidia,audio-routing =
+            "Headphone Jack", "HPL",
+            "Headphone Jack", "HPR",
+            "Int Spk", "SPKL",
+            "Int Spk", "SPKR",
+            "Earpiece", "RECL",
+            "Earpiece", "RECR",
+            "INA1", "Headset Mic",
+            "MIC1", "MICBIAS",
+            "MICBIAS", "Internal Mic 1",
+            "MIC2", "Internal Mic 2";
+
+        nvidia,i2s-controller = <&tegra_i2s0>;
+        nvidia,audio-codec = <&codec>;
+
+        clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+                 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+                 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml
new file mode 100644
index 0000000000..4d912458b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-max98090.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with MAX98090 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-max98090(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-max98090
+      - items:
+          - enum:
+              - nvidia,tegra-audio-max98090-nyan-big
+              - nvidia,tegra-audio-max98090-nyan-blaze
+          - const: nvidia,tegra-audio-max98090-nyan
+          - const: nvidia,tegra-audio-max98090
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphones
+        - Speakers
+        - Mic Jack
+        - Int Mic
+
+        # CODEC Pins
+        - MIC1
+        - MIC2
+        - DMICL
+        - DMICR
+        - IN1
+        - IN2
+        - IN3
+        - IN4
+        - IN5
+        - IN6
+        - IN12
+        - IN34
+        - IN56
+        - HPL
+        - HPR
+        - SPKL
+        - SPKR
+        - RCVL
+        - RCVR
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    sound {
+        compatible = "nvidia,tegra-audio-max98090-venice2",
+                     "nvidia,tegra-audio-max98090";
+        nvidia,model = "NVIDIA Tegra Venice2";
+
+        nvidia,audio-routing =
+                "Headphones", "HPR",
+                "Headphones", "HPL",
+                "Speakers", "SPKR",
+                "Speakers", "SPKL",
+                "Mic Jack", "MICBIAS",
+                "IN34", "Mic Jack";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&acodec>;
+
+        clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+                 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+                 <&tegra_car TEGRA124_CLK_EXTERN1>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml
new file mode 100644
index 0000000000..0c8067c3b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5631.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5631.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5631 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt5631(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5631
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Int Spk
+        - Headphone Jack
+        - Mic Jack
+        - Int Mic
+
+        # CODEC Pins
+        - MIC1
+        - MIC2
+        - AXIL
+        - AXIR
+        - MONOIN_RXN
+        - MONOIN_RXP
+        - DMIC
+        - MIC Bias1
+        - MIC Bias2
+        - MONO_IN
+        - AUXO1
+        - AUXO2
+        - SPOL
+        - SPOR
+        - HPOL
+        - HPOR
+        - MONO
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+    #include <dt-bindings/soc/tegra-pmc.h>
+    sound {
+        compatible = "asus,tegra-audio-rt5631-tf700t",
+                     "nvidia,tegra-audio-rt5631";
+        nvidia,model = "Asus Transformer Infinity TF700T RT5631";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "HPOL",
+                "Headphone Jack", "HPOR",
+                "Int Spk", "SPOL",
+                "Int Spk", "SPOR",
+                "MIC1", "MIC Bias1",
+                "MIC Bias1", "Mic Jack",
+                "DMIC", "Int Mic";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5631>;
+
+        clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+                 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+                 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
new file mode 100644
index 0000000000..2638592435
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5639 or RT5640 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt56(39|40)(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5640
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphones
+        - Speakers
+        - Mic Jack
+
+        # CODEC Pins
+        - DMIC1
+        - DMIC2
+        - MICBIAS1
+        - IN1P
+        - IN1R
+        - IN2P
+        - IN2R
+        - HPOL
+        - HPOR
+        - LOUTL
+        - LOUTR
+        - MONOP
+        - MONON
+        - SPOLP
+        - SPOLN
+        - SPORP
+        - SPORN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5640-dalmore",
+                     "nvidia,tegra-audio-rt5640";
+        nvidia,model = "NVIDIA Tegra Dalmore";
+
+        nvidia,audio-routing =
+                "Headphones", "HPOR",
+                "Headphones", "HPOL",
+                "Speakers", "SPORP",
+                "Speakers", "SPORN",
+                "Speakers", "SPOLP",
+                "Speakers", "SPOLN";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5640>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>, <&clk 217>, <&clk 120>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml
new file mode 100644
index 0000000000..09e1d0b18d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5677.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5677 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt5677(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5677
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphone
+        - Speaker
+        - Headset Mic
+        - Internal Mic 1
+        - Internal Mic 2
+
+        # CODEC Pins
+        - IN1P
+        - IN1N
+        - IN2P
+        - IN2N
+        - MICBIAS1
+        - DMIC1
+        - DMIC2
+        - DMIC3
+        - DMIC4
+        - DMIC L1
+        - DMIC L2
+        - DMIC L3
+        - DMIC L4
+        - DMIC R1
+        - DMIC R2
+        - DMIC R3
+        - DMIC R4
+        - LOUT1
+        - LOUT2
+        - LOUT3
+        - PDM1L
+        - PDM1R
+        - PDM2L
+        - PDM2R
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5677-ryu",
+                     "nvidia,tegra-audio-rt5677";
+        nvidia,model = "NVIDIA Tegra Ryu";
+
+        nvidia,audio-routing =
+                "Headphone", "LOUT2",
+                "Headphone", "LOUT1",
+                "Headset Mic", "MICBIAS1",
+                "IN1P", "Headset Mic",
+                "IN1N", "Headset Mic",
+                "DMIC L1", "Internal Mic 1",
+                "DMIC R1", "Internal Mic 1",
+                "DMIC L2", "Internal Mic 2",
+                "DMIC R2", "Internal Mic 2",
+                "Speaker", "PDM1L",
+                "Speaker", "PDM1R";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5677>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>,
+                 <&clk 217>,
+                 <&clk 121>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
new file mode 100644
index 0000000000..e5bc6a6ade
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with SGTL5000 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-sgtl5000([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-sgtl5000
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+        - Mic Jack
+
+        # CODEC Pins
+        - HP_OUT
+        - LINE_OUT
+        - LINE_IN
+        - MIC_IN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+
+    sound {
+      compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+                   "nvidia,tegra-audio-sgtl5000";
+      nvidia,model = "Toradex Apalis T30 SGTL5000";
+      nvidia,audio-routing =
+              "Headphone Jack", "HP_OUT",
+              "LINE_IN", "Line In Jack",
+              "MIC_IN", "Mic Jack";
+      nvidia,i2s-controller = <&tegra_i2s2>;
+      nvidia,audio-codec = <&codec>;
+      clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+               <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+               <&tegra_car TEGRA30_CLK_EXTERN1>;
+      clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml
new file mode 100644
index 0000000000..8c87cd1662
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-trimslice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with TrimSlice CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    const: nvidia,tegra-audio-trimslice
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-trimslice";
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&codec>;
+        clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml
new file mode 100644
index 0000000000..3323d6a438
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8753.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8753 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm8753(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm8753
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Mic Jack
+
+        # CODEC Pins
+        - LOUT1
+        - LOUT2
+        - ROUT1
+        - ROUT2
+        - MONO1
+        - MONO2
+        - OUT3
+        - OUT4
+        - LINE1
+        - LINE2
+        - RXP
+        - RXN
+        - ACIN
+        - ACOP
+        - MIC1N
+        - MIC1
+        - MIC2N
+        - MIC2
+        - Mic Bias
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8753-whistler",
+                     "nvidia,tegra-audio-wm8753";
+        nvidia,model = "tegra-wm8753-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "LOUT1",
+                "Headphone Jack", "ROUT1";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8753>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml
new file mode 100644
index 0000000000..1be25ce451
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8903 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-wm8903(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-wm8903
+      - items:
+          - pattern: ad,tegra-audio-plutux
+          - const: nvidia,tegra-audio-wm8903
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Int Spk
+        - Mic Jack
+        - Int Mic
+
+        # CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - DMICDAT
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - LOP
+        - LON
+        - ROP
+        - RON
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8903-harmony",
+                     "nvidia,tegra-audio-wm8903";
+        nvidia,model = "tegra-wm8903-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "HPOUTR",
+                "Headphone Jack", "HPOUTL",
+                "Int Spk", "ROP",
+                "Int Spk", "RON",
+                "Int Spk", "LOP",
+                "Int Spk", "LON",
+                "Mic Jack", "MICBIAS",
+                "IN1L", "Mic Jack";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8903>;
+
+        nvidia,spkr-en-gpios = <&codec 2 0>;
+        nvidia,hp-det-gpios = <&gpio 178 0>;
+        nvidia,int-mic-en-gpios = <&gpio 184 0>;
+        nvidia,ext-mic-en-gpios = <&gpio 185 0>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml
new file mode 100644
index 0000000000..397306b880
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm9712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM9712 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm9712([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm9712
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - Headphone
+        - LineIn
+        - Mic
+
+        # CODEC Pins
+        - MONOOUT
+        - HPOUTL
+        - HPOUTR
+        - LOUT2
+        - ROUT2
+        - OUT3
+        - LINEINL
+        - LINEINR
+        - PHONE
+        - PCBEEP
+        - MIC1
+        - MIC2
+        - Mic Bias
+
+required:
+  - nvidia,ac97-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+                     "nvidia,tegra-audio-wm9712";
+        nvidia,model = "Toradex Colibri T20";
+
+        nvidia,audio-routing =
+                "Headphone", "HPOUTL",
+                "Headphone", "HPOUTR",
+                "LineIn", "LINEINL",
+                "LineIn", "LINEINR",
+                "Mic", "MIC1";
+
+        nvidia,ac97-controller = <&ac97>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
new file mode 100644
index 0000000000..e15f387c4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra186 ASRC
+
+description: |
+  Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
+  of the input signal from one frequency to another. It can handle over a
+  wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
+  ASRC has two modes of operation. One where ratio can be programmed in SW
+  and the other where it gets the information from ratio estimator module.
+
+  It supports  sample rate conversions in the range of 8 to 192 kHz and
+  supports 6 streams upto 12 total channels. The input data size can be
+  16, 24 and 32 bits.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^asrc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-asrc
+      - items:
+          - enum:
+              - nvidia,tegra234-asrc
+              - nvidia,tegra194-asrc
+          - const: nvidia,tegra186-asrc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ASRC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ASRC has seven input ports and six output ports. Accordingly ACIF
+      (Audio Client Interfaces) port nodes are defined to represent the
+      ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are
+      connected to corresponding ports on AHUB (Audio Hub). Additional
+      input (port 6) is for receiving ratio information from estimator.
+
+    patternProperties:
+      '^port@[0-6]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF input ports
+      '^port@[7-9]|1[1-2]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    asrc@2910000 {
+        compatible = "nvidia,tegra186-asrc";
+        reg = <0x2910000 0x2000>;
+        sound-name-prefix = "ASRC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
new file mode 100644
index 0000000000..e1362c7747
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra186-dspk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra186 DSPK Controller
+
+description: |
+  The Digital Speaker Controller (DSPK) can be viewed as a Pulse
+  Density Modulation (PDM) transmitter that up-samples the input to
+  the desired sampling rate by interpolation and then converts the
+  over sampled Pulse Code Modulation (PCM) input to the desired 1-bit
+  output via Delta Sigma Modulation (DSM).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^dspk@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-dspk
+      - items:
+          - enum:
+              - nvidia,tegra234-dspk
+              - nvidia,tegra194-dspk
+          - const: nvidia,tegra186-dspk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dspk
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^DSPK[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DSPK ACIF (Audio Client Interface) port connected to the
+          corresponding AHUB (Audio Hub) ACIF port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DSPK DAP (Digital Audio Port) interface which can be connected
+          to external audio codec for playback.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+  - sound-name-prefix
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra186-clock.h>
+
+    dspk@2905000 {
+        compatible = "nvidia,tegra186-dspk";
+        reg = <0x2905000 0x100>;
+        clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+        clock-names = "dspk";
+        assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+        assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <12288000>;
+        sound-name-prefix = "DSPK1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
new file mode 100644
index 0000000000..eaf00102d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -0,0 +1,36 @@
+NVIDIA Tegra 20 AC97 controller
+
+Required properties:
+- compatible : "nvidia,tegra20-ac97"
+- reg : Should contain AC97 controller registers location and length
+- interrupts : Should contain AC97 interrupt
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - ac97
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
+  of the GPIO used to reset the external AC97 codec
+- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
+  of the GPIO corresponding with the AC97 DAP _FS line
+
+Example:
+
+ac97@70002000 {
+	compatible = "nvidia,tegra20-ac97";
+	reg = <0x70002000 0x200>;
+	interrupts = <0 81 0x04>;
+	nvidia,codec-reset-gpio = <&gpio 170 0>;
+	nvidia,codec-sync-gpio = <&gpio 120 0>;
+	clocks = <&tegra_car 3>;
+	resets = <&tegra_car 3>;
+	reset-names = "ac97";
+	dmas = <&apbdma 12>, <&apbdma 12>;
+	dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt
new file mode 100644
index 0000000000..6de3a7ee4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt
@@ -0,0 +1,12 @@
+NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
+
+Required properties:
+- compatible : "nvidia,tegra20-das"
+- reg : Should contain DAS registers location and length
+
+Example:
+
+das@70000c00 {
+	compatible = "nvidia,tegra20-das";
+	reg = <0x70000c00 0x80>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
new file mode 100644
index 0000000000..68ae124eaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 I2S Controller
+
+description: |
+  The I2S Controller streams synchronous serial audio data between system
+  memory and an external audio device. The controller supports the I2S Left
+  Justified Mode, Right Justified Mode, and DSP mode formats.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-i2s
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2s
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s@70002800 {
+        compatible = "nvidia,tegra20-i2s";
+        reg = <0x70002800 0x200>;
+        interrupts = <45>;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
+        dmas = <&apbdma 21>, <&apbdma 21>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
new file mode 100644
index 0000000000..dc76a4dc0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 S/PDIF Controller
+
+description: |
+  The S/PDIF controller supports both input and output in serial audio
+  digital interface format. The input controller can digitally recover
+  a clock from the received stream. The S/PDIF controller is also used
+  to generate the embedded audio for HDMI output channel.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: nvidia,tegra20-spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: out
+      - const: in
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spdif@70002400 {
+        compatible = "nvidia,tegra20-spdif";
+        reg = <0x70002400 0x200>;
+        interrupts = <77>;
+        clocks = <&clk 99>, <&clk 98>;
+        clock-names = "out", "in";
+        resets = <&rst 10>;
+        dmas = <&apbdma 3>, <&apbdma 3>;
+        dma-names = "rx", "tx";
+        #sound-dai-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
new file mode 100644
index 0000000000..15ab40aeab
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-admaif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADMAIF
+
+description: |
+  ADMAIF is the interface between ADMA and AHUB. Each ADMA channel
+  that sends/receives data to/from AHUB must interface through an
+  ADMAIF channel. ADMA channel sending data to AHUB pairs with ADMAIF
+  Tx channel and ADMA channel receiving data from AHUB pairs with
+  ADMAIF Rx channel.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^admaif@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra210-admaif
+          - nvidia,tegra186-admaif
+      - items:
+          - enum:
+              - nvidia,tegra234-admaif
+              - nvidia,tegra194-admaif
+          - const: nvidia,tegra186-admaif
+
+  reg:
+    maxItems: 1
+
+  dmas: true
+
+  dma-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels.
+      The number of port nodes depends on the number of ADMAIF channels
+      that SoC may have. These are interfaced with respective ACIF ports
+      in AHUB (Audio Hub). Each port is capable of data transfers in
+      both directions.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: nvidia,tegra210-admaif
+
+then:
+  properties:
+    dmas:
+      description:
+        DMA channel specifiers, equally divided for Tx and Rx.
+      minItems: 1
+      maxItems: 20
+    dma-names:
+      items:
+        pattern: "^[rt]x(10|[1-9])$"
+      description:
+        Should be "rx1", "rx2" ... "rx10" for DMA Rx channel
+        Should be "tx1", "tx2" ... "tx10" for DMA Tx channel
+      minItems: 1
+      maxItems: 20
+
+else:
+  properties:
+    dmas:
+      description:
+        DMA channel specifiers, equally divided for Tx and Rx.
+      minItems: 1
+      maxItems: 40
+    dma-names:
+      items:
+        pattern: "^[rt]x(1[0-9]|[1-9]|20)$"
+      description:
+        Should be "rx1", "rx2" ... "rx20" for DMA Rx channel
+        Should be "tx1", "tx2" ... "tx20" for DMA Tx channel
+      minItems: 1
+      maxItems: 40
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    admaif@702d0000 {
+        compatible = "nvidia,tegra210-admaif";
+        reg = <0x702d0000 0x800>;
+        dmas = <&adma 1>,  <&adma 1>,
+               <&adma 2>,  <&adma 2>,
+               <&adma 3>,  <&adma 3>,
+               <&adma 4>,  <&adma 4>,
+               <&adma 5>,  <&adma 5>,
+               <&adma 6>,  <&adma 6>,
+               <&adma 7>,  <&adma 7>,
+               <&adma 8>,  <&adma 8>,
+               <&adma 9>,  <&adma 9>,
+               <&adma 10>, <&adma 10>;
+        dma-names = "rx1",  "tx1",
+                    "rx2",  "tx2",
+                    "rx3",  "tx3",
+                    "rx4",  "tx4",
+                    "rx5",  "tx5",
+                    "rx6",  "tx6",
+                    "rx7",  "tx7",
+                    "rx8",  "tx8",
+                    "rx9",  "tx9",
+                    "rx10", "tx10";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
new file mode 100644
index 0000000000..e4c871797f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADX
+
+description: |
+  The Audio Demultiplexer (ADX) block takes an input stream with up to
+  16 channels and demultiplexes it into four output streams of up to 16
+  channels each. A byte RAM helps to form output frames by any combination
+  of bytes from the input frame. Its design is identical to that of byte
+  RAM in the AMX except that the data flow direction is reversed.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^adx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-adx
+      - items:
+          - enum:
+              - nvidia,tegra234-adx
+              - nvidia,tegra194-adx
+              - nvidia,tegra186-adx
+          - const: nvidia,tegra210-adx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ADX[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ADX has one input and four outputs. Accordingly ACIF (Audio Client
+      Interface) port nodes are defined to represent ADX input (port 0)
+      and outputs (ports 1 to 4). These are connected to corresponding
+      ports on AHUB (Audio Hub).
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ADX ACIF input port
+    patternProperties:
+      '^port@[1-4]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ADX ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    adx@702d3800 {
+        compatible = "nvidia,tegra210-adx";
+        reg = <0x702d3800 0x100>;
+        sound-name-prefix = "ADX1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
new file mode 100644
index 0000000000..c4abac81f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ahub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AHUB
+
+description: |
+  The Audio Hub (AHUB) comprises a collection of hardware accelerators
+  for audio pre-processing, post-processing and a programmable full
+  crossbar for routing audio data across these accelerators. It has
+  external interfaces such as I2S, DMIC, DSPK. It interfaces with ADMA
+  engine through ADMAIF.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^ahub@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra210-ahub
+          - nvidia,tegra186-ahub
+          - nvidia,tegra234-ahub
+      - items:
+          - const: nvidia,tegra194-ahub
+          - const: nvidia,tegra186-ahub
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ahub
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains list of ACIF (Audio CIF) port nodes for AHUB (Audio Hub).
+      These are connected to ACIF interfaces of AHUB clients. Thus the
+      number of port nodes depend on the number of clients that AHUB may
+      have depending on the SoC revision.
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+patternProperties:
+  '^i2s@[0-9a-f]+$':
+    type: object
+
+  '^dmic@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-dmic.yaml#
+
+  '^admaif@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-admaif.yaml#
+
+  '^dspk@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra186-dspk.yaml#
+
+  '^mvc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mvc.yaml#
+
+  '^sfc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-sfc.yaml#
+
+  '^amx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-amx.yaml#
+
+  '^adx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-adx.yaml#
+
+  '^amixer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mixer.yaml#
+
+  '^asrc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra186-asrc.yaml#
+
+  '^processing-engine@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-ope.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    ahub@702d0800 {
+        compatible = "nvidia,tegra210-ahub";
+        reg = <0x702d0800 0x800>;
+        clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        clock-names = "ahub";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x702d0000 0x702d0000 0x0000e400>;
+
+        // All AHUB child nodes below
+        admaif@702d0000 {
+            compatible = "nvidia,tegra210-admaif";
+            reg = <0x702d0000 0x800>;
+            dmas = <&adma 1>,  <&adma 1>,
+               <&adma 2>,  <&adma 2>,
+               <&adma 3>,  <&adma 3>,
+               <&adma 4>,  <&adma 4>,
+               <&adma 5>,  <&adma 5>,
+               <&adma 6>,  <&adma 6>,
+               <&adma 7>,  <&adma 7>,
+               <&adma 8>,  <&adma 8>,
+               <&adma 9>,  <&adma 9>,
+               <&adma 10>, <&adma 10>;
+            dma-names = "rx1",  "tx1",
+                    "rx2",  "tx2",
+                    "rx3",  "tx3",
+                    "rx4",  "tx4",
+                    "rx5",  "tx5",
+                    "rx6",  "tx6",
+                    "rx7",  "tx7",
+                    "rx8",  "tx8",
+                    "rx9",  "tx9",
+                    "rx10", "tx10";
+        };
+
+        i2s@702d1000 {
+            compatible = "nvidia,tegra210-i2s";
+            reg = <0x702d1000 0x100>;
+            clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            clock-names = "i2s";
+            assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+            assigned-clock-rates = <1536000>;
+            sound-name-prefix = "I2S1";
+        };
+
+        dmic@702d4000 {
+            compatible = "nvidia,tegra210-dmic";
+            reg = <0x702d4000 0x100>;
+            clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+            clock-names = "dmic";
+            assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+            assigned-clock-rates = <3072000>;
+            sound-name-prefix = "DMIC1";
+        };
+
+        // More child nodes to follow
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
new file mode 100644
index 0000000000..021b72546b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AMX
+
+description: |
+  The Audio Multiplexer (AMX) block can multiplex up to four input streams
+  each of which can have maximum 16 channels and generate an output stream
+  with maximum 16 channels. A byte RAM helps to form an output frame by
+  any combination of bytes from the input frames.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^amx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amx
+      - items:
+          - const: nvidia,tegra186-amx
+          - const: nvidia,tegra210-amx
+      - const: nvidia,tegra194-amx
+      - items:
+          - const: nvidia,tegra234-amx
+          - const: nvidia,tegra194-amx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^AMX[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      AMX has four inputs and one output. Accordingly ACIF (Audio Client
+      Interfaces) port nodes are defined to represent AMX inputs (port 0
+      to 3) and output (port 4). These are connected to corresponding
+      ports on AHUB (Audio Hub).
+
+    patternProperties:
+      '^port@[0-3]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: AMX ACIF input ports
+
+    properties:
+      port@4:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: AMX ACIF output port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amx@702d3000 {
+        compatible = "nvidia,tegra210-amx";
+        reg = <0x702d3000 0x100>;
+        sound-name-prefix = "AMX1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
new file mode 100644
index 0000000000..bff551c35d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-dmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 DMIC Controller
+
+description: |
+  The Digital MIC (DMIC) Controller is used to interface with Pulse
+  Density Modulation (PDM) input devices. It converts PDM signals to
+  Pulse Coded Modulation (PCM) signals. DMIC can be viewed as a PDM
+  receiver.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^dmic@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-dmic
+      - items:
+          - enum:
+              - nvidia,tegra234-dmic
+              - nvidia,tegra194-dmic
+              - nvidia,tegra186-dmic
+          - const: nvidia,tegra210-dmic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dmic
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^DMIC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DMIC ACIF (Audio Client Interface) port connected to the
+          corresponding AHUB (Audio Hub) ACIF port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          DMIC DAP (Digital Audio Port) interface which can be connected
+          to external audio codec for capture.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    dmic@702d4000 {
+        compatible = "nvidia,tegra210-dmic";
+        reg = <0x702d4000 0x100>;
+        clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+        clock-names = "dmic";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <3072000>;
+        sound-name-prefix = "DMIC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
new file mode 100644
index 0000000000..a82f11fb6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 I2S Controller
+
+description: |
+  The Inter-IC Sound (I2S) controller implements full-duplex,
+  bi-directional and single direction point-to-point serial
+  interfaces. It can interface with I2S compatible devices.
+  I2S controller can operate both in master and slave mode.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^i2s@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-i2s
+      - items:
+          - enum:
+              - nvidia,tegra234-i2s
+              - nvidia,tegra194-i2s
+              - nvidia,tegra186-i2s
+          - const: nvidia,tegra210-i2s
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2S bit clock
+      - description:
+          Sync input clock, which can act as clock source to other I/O
+          modules in AHUB. The Tegra I2S driver sets this clock rate as
+          per bit clock rate. I/O module which wants to use this clock
+          as source, can mention this clock as parent in the DT bindings.
+          This is an optional clock entry, since it is only required when
+          some other I/O wants to reference from a particular I2Sx
+          instance.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: i2s
+      - const: sync_input
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 2
+
+  sound-name-prefix:
+    pattern: "^I2S[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          I2S ACIF (Audio Client Interface) port connected to the
+          corresponding AHUB (Audio Hub) ACIF port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          I2S DAP (Digital Audio Port) interface which can be connected
+          to external audio codec for playback or capture.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-parents
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra210-car.h>
+
+    i2s@702d1000 {
+        compatible = "nvidia,tegra210-i2s";
+        reg = <0x702d1000 0x100>;
+        clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+        clock-names = "i2s";
+        assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+        assigned-clock-rates = <1536000>;
+        sound-name-prefix = "I2S1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
new file mode 100644
index 0000000000..5b9198602f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MBDRC
+
+description:
+  The Multi Band Dynamic Range Compressor (MBDRC) is part of Output
+  Processing Engine (OPE) which interfaces with Audio Hub (AHUB) via
+  Audio Client Interface (ACIF). MBDRC can be used as a traditional
+  single full band or a dual band or a multi band dynamic processor.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mbdrc
+      - items:
+          - enum:
+              - nvidia,tegra234-mbdrc
+              - nvidia,tegra194-mbdrc
+              - nvidia,tegra186-mbdrc
+          - const: nvidia,tegra210-mbdrc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dynamic-range-compressor@702d8200 {
+        compatible = "nvidia,tegra210-mbdrc";
+        reg = <0x702d8200 0x200>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
new file mode 100644
index 0000000000..049898f02e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 Mixer
+
+description: |
+  The Mixer supports mixing of up to ten 7.1 audio input streams and
+  generate five outputs (each of which can be any combination of the
+  ten input streams).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^amixer@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amixer
+      - items:
+          - enum:
+              - nvidia,tegra234-amixer
+              - nvidia,tegra194-amixer
+              - nvidia,tegra186-amixer
+          - const: nvidia,tegra210-amixer
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MIXER[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Mixer has ten inputs and five outputs. Accordingly ACIF (Audio
+      Client Interfaces) port nodes are defined to represent Mixer
+      inputs (port 0 to 9) and outputs (port 10 to 14). These are
+      connected to corresponding ports on AHUB (Audio Hub).
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Mixer ACIF input ports
+      '^port@[10-14]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Mixer ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amixer@702dbb00 {
+        compatible = "nvidia,tegra210-amixer";
+        reg = <0x702dbb00 0x800>;
+        sound-name-prefix = "MIXER1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
new file mode 100644
index 0000000000..d0280d8aa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MVC
+
+description: |
+  The Master Volume Control (MVC) provides gain or attenuation to a digital
+  signal path. It can be used in input or output signal path for per-stream
+  volume control or it can be used as master volume control. The MVC block
+  has one input and one output. The input digital stream can be mono or
+  multi-channel (up to 7.1 channels) stream. An independent mute control is
+  also included in the MVC block.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^mvc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mvc
+      - items:
+          - enum:
+              - nvidia,tegra234-mvc
+              - nvidia,tegra194-mvc
+              - nvidia,tegra186-mvc
+          - const: nvidia,tegra210-mvc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MVC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          MVC ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          MVC ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    mvc@702da000 {
+        compatible = "nvidia,tegra210-mvc";
+        reg = <0x702da000 0x200>;
+        sound-name-prefix = "MVC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
new file mode 100644
index 0000000000..9017fb6d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ope.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 OPE
+
+description:
+  The Output Processing Engine (OPE) is one of the AHUB client. It has
+  PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor)
+  sub blocks for data processing.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-ope
+      - items:
+          - enum:
+              - nvidia,tegra234-ope
+              - nvidia,tegra194-ope
+              - nvidia,tegra186-ope
+          - const: nvidia,tegra210-ope
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  sound-name-prefix:
+    pattern: "^OPE[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+patternProperties:
+  '^equalizer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-peq.yaml#
+
+  '^dynamic-range-compressor@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mbdrc.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    processing-engine@702d8000 {
+        compatible = "nvidia,tegra210-ope";
+        reg = <0x702d8000 0x100>;
+        sound-name-prefix = "OPE1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
new file mode 100644
index 0000000000..1e373c49d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-peq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 PEQ
+
+description:
+  The Parametric Equalizer (PEQ) is a cascade of biquad filters with
+  each filter tuned based on certain parameters. It can be used to
+  equalize the irregularities in the speaker frequency response.
+  PEQ sits inside Output Processing Engine (OPE) which interfaces
+  with Audio Hub (AHUB) via Audio Client Interface (ACIF).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-peq
+      - items:
+          - enum:
+              - nvidia,tegra234-peq
+              - nvidia,tegra194-peq
+              - nvidia,tegra186-peq
+          - const: nvidia,tegra210-peq
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    equalizer@702d8100 {
+        compatible = "nvidia,tegra210-peq";
+        reg = <0x702d8100 0x100>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
new file mode 100644
index 0000000000..185ca0be4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 SFC
+
+description: |
+  The Sampling Frequency Converter (SFC) converts the sampling frequency
+  of the input signal from one frequency to another. It supports sampling
+  frequency conversions of streams of up to two channels (stereo).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^sfc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-sfc
+      - items:
+          - enum:
+              - nvidia,tegra234-sfc
+              - nvidia,tegra194-sfc
+              - nvidia,tegra186-sfc
+          - const: nvidia,tegra210-sfc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^SFC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          SFC ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          SFC ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    sfc@702d2000 {
+        compatible = "nvidia,tegra210-sfc";
+        reg = <0x702d2000 0x200>;
+        sound-name-prefix = "SFC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
new file mode 100644
index 0000000000..0e9a1895d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -0,0 +1,88 @@
+NVIDIA Tegra30 AHUB (Audio Hub)
+
+Required properties:
+- compatible : For Tegra30, must contain "nvidia,tegra30-ahub".  For Tegra114,
+  must contain "nvidia,tegra114-ahub".  For Tegra124, must contain
+  "nvidia,tegra124-ahub".  Otherwise, must contain "nvidia,<chip>-ahub",
+  plus at least one of the above, where <chip> is tegra132.
+- reg : Should contain the register physical address and length for each of
+  the AHUB's register blocks.
+  - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
+  - Tegra114 requires an additional entry, for the APBIF2 register block.
+- interrupts : Should contain AHUB interrupt
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - d_audio
+  - apbif
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  Tegra30 and later:
+  - d_audio
+  - apbif
+  - i2s0
+  - i2s1
+  - i2s2
+  - i2s3
+  - i2s4
+  - dam0
+  - dam1
+  - dam2
+  - spdif
+  Tegra114 and later additionally require:
+  - amx
+  - adx
+  Tegra124 and later additionally require:
+  - amx1
+  - adx1
+  - afc0
+  - afc1
+  - afc2
+  - afc3
+  - afc4
+  - afc5
+- ranges : The bus address mapping for the configlink register bus.
+  Can be empty since the mapping is 1:1.
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx0 .. rx<n>
+  - tx0 .. tx<n>
+  ... where n is:
+  Tegra30: 3
+  Tegra114, Tegra124: 9
+- #address-cells : For the configlink bus. Should be <1>;
+- #size-cells : For the configlink bus. Should be <1>.
+
+AHUB client modules need to specify the IDs of their CIFs (Client InterFaces).
+For RX CIFs, the numbers indicate the register number within AHUB routing
+register space (APBIF 0..3 RX, I2S 0..5 RX, DAM 0..2 RX 0..1, SPDIF RX 0..1).
+For TX CIFs, the numbers indicate the bit position within the AHUB routing
+registers (APBIF 0..3 TX, I2S 0..5 TX, DAM 0..2 TX, SPDIF TX 0..1).
+
+Example:
+
+ahub@70080000 {
+	compatible = "nvidia,tegra30-ahub";
+	reg = <0x70080000 0x200 0x70080200 0x100>;
+	interrupts = < 0 103 0x04 >;
+	nvidia,dma-request-selector = <&apbdma 1>;
+	clocks = <&tegra_car 106>, <&tegra_car 107>;
+	clock-names = "d_audio", "apbif";
+	resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+		<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
+		<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
+		<&tegra_car 110>, <&tegra_car 10>;
+	reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+		"i2s3", "i2s4", "dam0", "dam1", "dam2",
+		"spdif";
+	dmas = <&apbdma 1>, <&apbdma 1>;
+	       <&apbdma 2>, <&apbdma 2>;
+	       <&apbdma 3>, <&apbdma 3>;
+	       <&apbdma 4>, <&apbdma 4>;
+	dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
+	ranges;
+	#address-cells = <1>;
+	#size-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
new file mode 100644
index 0000000000..12c31b4b99
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra30-hda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDA controller
+
+description: |
+  The High Definition Audio (HDA) block provides a serial interface to
+  audio codec. It supports multiple input and output streams.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hda@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra30-hda
+      - items:
+          - enum:
+              - nvidia,tegra234-hda
+              - nvidia,tegra194-hda
+              - nvidia,tegra186-hda
+              - nvidia,tegra210-hda
+              - nvidia,tegra124-hda
+          - const: nvidia,tegra30-hda
+      - items:
+          - const: nvidia,tegra132-hda
+          - const: nvidia,tegra124-hda
+          - const: nvidia,tegra30-hda
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt from the HDA controller
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hda
+      - const: hda2hdmi
+      - const: hda2codec_2x
+
+  resets:
+    minItems: 2
+    maxItems: 3
+
+  reset-names:
+    minItems: 2
+    items:
+      - const: hda
+      - const: hda2hdmi
+      - const: hda2codec_2x
+
+  power-domains:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      The user-visible name of this sound complex. If this property is
+      not specified then boards can use default name provided in hda driver.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/clock/tegra124-car-common.h>
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    hda@70030000 {
+        compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+        reg = <0x70030000 0x10000>;
+        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDA>,
+                 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+                 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+        clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+        resets = <&tegra_car 125>, /* hda */
+                 <&tegra_car 128>, /* hda2hdmi */
+                 <&tegra_car 111>; /* hda2codec_2x */
+        reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+        nvidia,model = "jetson-tk1-hda";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
new file mode 100644
index 0000000000..38caa936f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
@@ -0,0 +1,27 @@
+NVIDIA Tegra30 I2S controller
+
+Required properties:
+- compatible : For Tegra30, must contain "nvidia,tegra30-i2s".  For Tegra124,
+  must contain "nvidia,tegra124-i2s".  Otherwise, must contain
+  "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
+  tegra114 or tegra132.
+- reg : Should contain I2S registers location and length
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - i2s
+- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
+  first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
+
+Example:
+
+i2s@70080300 {
+	compatible = "nvidia,tegra30-i2s";
+	reg = <0x70080300 0x100>;
+	nvidia,ahub-cif-ids = <4 4>;
+	clocks = <&tegra_car 11>;
+	resets = <&tegra_car 11>;
+	reset-names = "i2s";
+};
diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
new file mode 100644
index 0000000000..fd2415e231
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nxp,tfa989x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nxp,tfa9890
+      - nxp,tfa9895
+      - nxp,tfa9897
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  rcv-gpios:
+    description: optional GPIO to be asserted when receiver mode is enabled.
+
+  sound-name-prefix: true
+
+  vddd-supply:
+    description: regulator phandle for the VDDD power supply.
+
+if:
+  not:
+    properties:
+      compatible:
+        const: nxp,tfa9897
+then:
+  properties:
+    rcv-gpios: false
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      audio-codec@34 {
+        compatible = "nxp,tfa9895";
+        reg = <0x34>;
+        sound-name-prefix = "Speaker Left";
+        #sound-dai-cells = <0>;
+      };
+      audio-codec@36 {
+        compatible = "nxp,tfa9895";
+        reg = <0x36>;
+        sound-name-prefix = "Speaker Right";
+        #sound-dai-cells = <0>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      speaker_codec_top: audio-codec@34 {
+        compatible = "nxp,tfa9897";
+        reg = <0x34>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 50 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_top_default>;
+        sound-name-prefix = "Speaker Top";
+        #sound-dai-cells = <0>;
+      };
+
+      speaker_codec_bottom: audio-codec@36 {
+        compatible = "nxp,tfa9897";
+        reg = <0x36>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 111 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_bottom_default>;
+        sound-name-prefix = "Speaker Bottom";
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
new file mode 100644
index 0000000000..462b04e820
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -0,0 +1,91 @@
+* Texas Instruments OMAP4+ and twl6040 based audio setups
+
+Required properties:
+- compatible: "ti,abe-twl6040"
+- ti,model: Name of the sound card ( for example "SDP4430")
+- ti,mclk-freq: MCLK frequency for HPPLL operation
+- ti,mcpdm: phandle for the McPDM node
+- ti,twl6040: phandle for the twl6040 core node
+- ti,audio-routing: List of connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source.
+
+Optional properties:
+- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
+- ti,jack-detection: Need to be present if the board capable to detect jack
+  insertion, removal.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Earphone Spk
+ * Ext Spk
+ * Line Out
+ * Vibrator
+ * Headset Mic
+ * Main Handset Mic
+ * Sub Handset Mic
+ * Line In
+ * Digital Mic
+
+twl6040 pins:
+ * HSOL
+ * HSOR
+ * EP
+ * HFL
+ * HFR
+ * AUXL
+ * AUXR
+ * VIBRAL
+ * VIBRAR
+ * HSMIC
+ * MAINMIC
+ * SUBMIC
+ * AFML
+ * AFMR
+
+ * Headset Mic Bias
+ * Main Mic Bias
+ * Digital Mic1 Bias
+ * Digital Mic2 Bias
+
+Digital mic pins:
+ * DMic
+
+Example:
+
+sound {
+	compatible = "ti,abe-twl6040";
+	ti,model = "SDP4430";
+
+	ti,jack-detection;
+	ti,mclk-freq = <38400000>;
+
+	ti,mcpdm = <&mcpdm>;
+	ti,dmic = <&dmic>;
+
+	ti,twl6040 = <&twl6040>;
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Earphone Spk", "EP",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"Vibrator", "VIBRAL",
+		"Vibrator", "VIBRAR",
+		"HSMIC", "Headset Mic",
+		"Headset Mic", "Headset Mic Bias",
+		"MAINMIC", "Main Handset Mic",
+		"Main Handset Mic", "Main Mic Bias",
+		"SUBMIC", "Sub Handset Mic",
+		"Sub Handset Mic", "Main Mic Bias",
+		"AFML", "Line In",
+		"AFMR", "Line In",
+		"DMic", "Digital Mic",
+		"Digital Mic", "Digital Mic1 Bias";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-dmic.txt b/Documentation/devicetree/bindings/sound/omap-dmic.txt
new file mode 100644
index 0000000000..418e30e72e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-dmic.txt
@@ -0,0 +1,20 @@
+* Texas Instruments OMAP4+ Digital Microphone Module
+
+Required properties:
+- compatible: "ti,omap4-dmic"
+- reg: Register location and size as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- interrupts: Interrupt number for DMIC
+- ti,hwmods: Name of the hwmod associated with OMAP dmic IP
+
+Example:
+
+dmic: dmic@4012e000 {
+	compatible = "ti,omap4-dmic";
+	reg = <0x4012e000 0x7f>, /* MPU private access */
+	      <0x4902e000 0x7f>; /* L3 Interconnect */
+	interrupts = <0 114 0x4>;
+	interrupt-parent = <&gic>;
+	ti,hwmods = "dmic";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
new file mode 100644
index 0000000000..ae8bf703ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
@@ -0,0 +1,36 @@
+* Texas Instruments OMAP2+ McBSP module
+
+Required properties:
+- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420
+	      "ti,omap2430-mcbsp" for McBSP on OMAP2430
+	      "ti,omap3-mcbsp" for McBSP on OMAP3
+	      "ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC
+- reg: Register location and size, for OMAP4+ as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- reg-names: Array of strings associated with the address space
+- interrupts: Interrupt numbers for the McBSP port, as an array in case the
+	      McBSP IP have more interrupt lines:
+	<OCP compliant irq>,
+	<TX irq>,
+	<RX irq>;
+- interrupt-names: Array of strings associated with the interrupt numbers
+- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC)
+- ti,hwmods: Name of the hwmod associated to the McBSP port
+
+Example:
+
+mcbsp2: mcbsp@49022000 {
+	compatible = "ti,omap3-mcbsp";
+	reg = <0x49022000 0xff>,
+	      <0x49028000 0xff>;
+	reg-names = "mpu", "sidetone";
+	interrupts = <0 17 0x4>, /* OCP compliant interrupt */
+		     <0 62 0x4>, /* TX interrupt */
+		     <0 63 0x4>, /* RX interrupt */
+		     <0 4 0x4>;  /* Sidetone */
+	interrupt-names = "common", "tx", "rx", "sidetone";
+	interrupt-parent = <&intc>;
+	ti,buffer-size = <1280>;
+	ti,hwmods = "mcbsp2";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
new file mode 100644
index 0000000000..ff98a0cb5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
@@ -0,0 +1,30 @@
+* Texas Instruments OMAP4+ McPDM
+
+Required properties:
+- compatible: "ti,omap4-mcpdm"
+- reg: Register location and size as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- interrupts: Interrupt number for McPDM
+- ti,hwmods: Name of the hwmod associated to the McPDM
+- clocks:  phandle for the pdmclk provider, likely <&twl6040>
+- clock-names: Must be "pdmclk"
+
+Example:
+
+mcpdm: mcpdm@40132000 {
+	compatible = "ti,omap4-mcpdm";
+	reg = <0x40132000 0x7f>, /* MPU private access */
+	      <0x49032000 0x7f>; /* L3 Interconnect */
+	interrupts = <0 112 0x4>;
+	interrupt-parent = <&gic>;
+	ti,hwmods = "mcpdm";
+};
+
+In board DTS file the pdmclk needs to be added:
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
new file mode 100644
index 0000000000..f6a715e4ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
@@ -0,0 +1,62 @@
+* Texas Instruments SoC with twl4030 based audio setups
+
+Required properties:
+- compatible: "ti,omap-twl4030"
+- ti,model: Name of the sound card (for example "omap3beagle")
+- ti,mcbsp: phandle for the McBSP node
+
+Optional properties:
+- ti,codec: phandle for the twl4030 audio node
+- ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl
+- ti, jack-det-gpio: Jack detect GPIO
+- ti,audio-routing: List of connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source.
+  If the routing is not provided all possible connection will be available
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Earpiece Spk
+ * Handsfree Spk
+ * Ext Spk
+ * Main Mic
+ * Sub Mic
+ * Headset Mic
+ * Carkit Mic
+ * Digital0 Mic
+ * Digital1 Mic
+ * Line In
+
+twl4030 pins:
+ * HSOL
+ * HSOR
+ * EARPIECE
+ * HFL
+ * HFR
+ * PREDRIVEL
+ * PREDRIVER
+ * CARKITL
+ * CARKITR
+ * MAINMIC
+ * SUBMIC
+ * HSMIC
+ * DIGIMIC0
+ * DIGIMIC1
+ * CARKITMIC
+ * AUXL
+ * AUXR
+
+ * Headset Mic Bias
+ * Mic Bias 1 /* Used for Main Mic or Digimic0 */
+ * Mic Bias 2 /* Used for Sub Mic or Digimic1 */
+
+Example:
+
+sound {
+	compatible = "ti,omap-twl4030";
+	ti,model = "omap3beagle";
+
+	ti,mcbsp = <&mcbsp2>;
+};
diff --git a/Documentation/devicetree/bindings/sound/option,gtm601.yaml b/Documentation/devicetree/bindings/sound/option,gtm601.yaml
new file mode 100644
index 0000000000..ff813d97fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/option,gtm601.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/option,gtm601.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GTM601 UMTS modem audio interface CODEC
+
+maintainers:
+  - kernel@puri.sm
+
+description: >
+  This device has no configuration interface. The sample rate and channels are
+  based on the compatible string
+
+properties:
+  compatible:
+    oneOf:
+      - description: Broadmobi BM818 (48Khz stereo)
+        items:
+          - const: broadmobi,bm818
+          - const: option,gtm601
+      - description: GTM601 (8kHz mono)
+        const: option,gtm601
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+
+allOf:
+  - $ref: dai-common.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    codec {
+        compatible = "option,gtm601";
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/pcm1789.txt b/Documentation/devicetree/bindings/sound/pcm1789.txt
new file mode 100644
index 0000000000..3c74ed220a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm1789.txt
@@ -0,0 +1,22 @@
+Texas Instruments pcm1789 DT bindings
+
+PCM1789 is a simple audio codec that can be connected via
+I2C or SPI. Currently, only I2C bus is supported.
+
+Required properties:
+
+ - compatible: "ti,pcm1789"
+
+Required properties on I2C:
+
+ - reg: the I2C address
+ - reset-gpios: GPIO to control the RESET pin
+
+Examples:
+
+	audio-codec@4c {
+		compatible = "ti,pcm1789";
+		reg = <0x4c>;
+		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/pcm179x.txt b/Documentation/devicetree/bindings/sound/pcm179x.txt
new file mode 100644
index 0000000000..436c2b2476
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm179x.txt
@@ -0,0 +1,27 @@
+Texas Instruments pcm179x DT bindings
+
+This driver supports both the I2C and SPI bus.
+
+Required properties:
+
+ - compatible: "ti,pcm1792a"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: the I2C address
+
+
+Examples:
+
+	codec_spi: 1792a@0 {
+		compatible = "ti,pcm1792a";
+		spi-max-frequency = <600000>;
+	};
+
+	codec_i2c: 1792a@4c {
+		compatible = "ti,pcm1792a";
+		reg = <0x4c>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/pcm186x.txt b/Documentation/devicetree/bindings/sound/pcm186x.txt
new file mode 100644
index 0000000000..1087f48559
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm186x.txt
@@ -0,0 +1,42 @@
+Texas Instruments PCM186x Universal Audio ADC
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "ti,pcm1862",
+                "ti,pcm1863",
+                "ti,pcm1864",
+                "ti,pcm1865"
+
+ - reg : The I2C address of the device for I2C, the chip select
+         number for SPI.
+
+ - avdd-supply: Analog core power supply (3.3v)
+ - dvdd-supply: Digital core power supply
+ - iovdd-supply: Digital IO power supply
+        See regulator/regulator.txt for more information
+
+CODEC input pins:
+ * VINL1
+ * VINR1
+ * VINL2
+ * VINR2
+ * VINL3
+ * VINR3
+ * VINL4
+ * VINR4
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+
+	pcm186x: audio-codec@4a {
+		compatible = "ti,pcm1865";
+		reg = <0x4a>;
+
+		avdd-supply = <&reg_3v3_analog>;
+		dvdd-supply = <&reg_3v3>;
+		iovdd-supply = <&reg_1v8>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt
new file mode 100644
index 0000000000..97de66932d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm3060.txt
@@ -0,0 +1,23 @@
+PCM3060 audio CODEC
+
+This driver supports both I2C and SPI.
+
+Required properties:
+
+- compatible: "ti,pcm3060"
+
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
+
+Optional properties:
+
+- ti,out-single-ended: "true" if output is single-ended;
+                       "false" or not specified if output is differential.
+
+Examples:
+
+	pcm3060: pcm3060@46 {
+		 compatible = "ti,pcm3060";
+		 reg = <0x46>;
+		 ti,out-single-ended = "true";
+	};
diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt
new file mode 100644
index 0000000000..c63ab0b6ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm5102a.txt
@@ -0,0 +1,13 @@
+PCM5102a audio CODECs
+
+These devices does not use I2C or SPI.
+
+Required properties:
+
+  - compatible : set as "ti,pcm5102a"
+
+Examples:
+
+	pcm5102a: pcm5102a {
+		compatible = "ti,pcm5102a";
+	};
diff --git a/Documentation/devicetree/bindings/sound/pcm512x.txt b/Documentation/devicetree/bindings/sound/pcm512x.txt
new file mode 100644
index 0000000000..3aae3b41bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/pcm512x.txt
@@ -0,0 +1,52 @@
+PCM512x audio CODECs
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141" or
+                 "ti,pcm5142"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+  - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
+    device, as covered in bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - clocks : A clock specifier for the clock connected as SCLK.  If this
+    is absent the device will be configured to clock from BCLK.  If pll-in
+    and pll-out are specified in addition to a clock, the device is
+    configured to accept clock input on a specified gpio pin.
+
+  - pll-in, pll-out : gpio pins used to connect the pll using <1>
+    through <6>.  The device will be configured for clock input on the
+    given pll-in pin and PLL output on the given pll-out pin.  An
+    external connection from the pll-out pin to the SCLK pin is assumed.
+
+Examples:
+
+	pcm5122: pcm5122@4c {
+		compatible = "ti,pcm5122";
+		reg = <0x4c>;
+
+		AVDD-supply = <&reg_3v3_analog>;
+		DVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_3v3>;
+	};
+
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+		reg = <0x4c>;
+
+		AVDD-supply = <&reg_3v3_analog>;
+		DVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+		pll-in = <3>;
+		pll-out = <6>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
new file mode 100644
index 0000000000..e1b9fa8a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -0,0 +1,128 @@
+* Qualcomm Technologies APQ8096 ASoC sound card driver
+
+This binding describes the APQ8096 sound card, which uses qdsp for audio.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,apq8096-sndcard"
+
+- audio-routing:
+	Usage: Optional
+	Value type: <stringlist>
+	Definition:  A list of the connections between audio components.
+		  Each entry is a pair of strings, the first being the
+		  connection's sink, the second being the connection's
+		  source. Valid names could be power supplies, MicBias
+		  of codec and the jacks on the board:
+		  Valid names include:
+
+		Board Connectors:
+			"Headphone Left"
+			"Headphone Right"
+			"Earphone"
+			"Line Out1"
+			"Line Out2"
+			"Line Out3"
+			"Line Out4"
+			"Analog Mic1"
+			"Analog Mic2"
+			"Analog Mic3"
+			"Analog Mic4"
+			"Analog Mic5"
+			"Analog Mic6"
+			"Digital Mic2"
+			"Digital Mic3"
+
+		Audio pins and MicBias on WCD9335 Codec:
+			"MIC_BIAS1"
+			"MIC_BIAS2"
+			"MIC_BIAS3"
+			"MIC_BIAS4"
+			"AMIC1"
+			"AMIC2"
+			"AMIC3"
+			"AMIC4"
+			"AMIC5"
+			"AMIC6"
+			"AMIC6"
+			"DMIC1"
+			"DMIC2"
+			"DMIC3"
+
+- model:
+	Usage: required
+	Value type: <stringlist>
+	Definition: The user-visible name of this sound card.
+
+- aux-devs
+	Usage: optional
+	Value type: <array of phandles>
+	Definition: A list of phandles for auxiliary devices (e.g. analog
+		    amplifiers) that do not appear directly within the DAI
+		    links. Should be connected to another audio component
+		    using "audio-routing".
+
+= dailinks
+Each subnode of sndcard represents either a dailink, and subnodes of each
+dailinks would be cpu/codec/platform dais.
+
+- link-name:
+	Usage: required
+	Value type: <string>
+	Definition: User friendly name for dai link
+
+= CPU, PLATFORM, CODEC dais subnodes
+- cpu:
+	Usage: required
+	Value type: <subnode>
+	Definition: cpu dai sub-node
+
+- codec:
+	Usage: Optional
+	Value type: <subnode>
+	Definition: codec dai sub-node
+
+- platform:
+	Usage: Optional
+	Value type: <subnode>
+	Definition: platform dai sub-node
+
+- sound-dai:
+	Usage: required
+	Value type: <phandle with arguments>
+	Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
+
+Obsolete:
+	qcom,model: String for soundcard name (Use model instead)
+	qcom,audio-routing: A list of the connections between audio components.
+			    (Use audio-routing instead)
+
+Example:
+
+audio {
+	compatible = "qcom,apq8096-sndcard";
+	model = "DB820c";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afe HDMI_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6adm>;
+		};
+
+		codec {
+			sound-dai = <&hdmi 0>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 0000000000..3a559bd07a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,290 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. LPASS CPU dai driver
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Rohit kumar <quic_rohkumar@quicinc.com>
+
+description: |
+  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
+  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
+  is a module to configure Low-Power Audio Interface(LPAIF) core registers
+  across different IP versions.
+
+properties:
+  compatible:
+    enum:
+      - qcom,lpass-cpu
+      - qcom,apq8016-lpass-cpu
+      - qcom,sc7180-lpass-cpu
+      - qcom,sc7280-lpass-cpu
+
+  reg:
+    minItems: 1
+    maxItems: 6
+    description: LPAIF core registers
+
+  reg-names:
+    minItems: 1
+    maxItems: 6
+
+  clocks:
+    minItems: 3
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description: LPAIF DMA buffer interrupt
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
+
+  qcom,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle for the audio DSP node
+
+  iommus:
+    minItems: 2
+    maxItems: 3
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+
+  power-domain-names:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^dai-link@[0-9a-f]+$":
+    type: object
+    description: |
+      LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node
+      depends on the specific driver providing the functionality and
+      properties.
+    properties:
+      reg:
+        maxItems: 1
+        description: Must be one of the DAI ID
+
+      qcom,playback-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for playback
+
+      qcom,capture-sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: list of MI2S data lines for capture
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,lpass-cpu
+
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-osr-clk
+            - const: mi2s-bit-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,apq8016-lpass-cpu
+
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+            - const: mi2s-bit-clk2
+            - const: mi2s-bit-clk3
+            - const: pcnoc-mport-clk
+            - const: pcnoc-sway-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7180-lpass-cpu
+
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: pcnoc-sway-clk
+            - const: audio-core
+            - const: mclk0
+            - const: pcnoc-mport-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          items:
+            - const: lpass-hdmiif
+            - const: lpass-lpaif
+        interrupts:
+          minItems: 2
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: lpass-irq-lpaif
+            - const: lpass-irq-hdmi
+      required:
+        - iommus
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpass-cpu
+
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: aon_cc_audio_hm_h
+            - const: audio_cc_ext_mclk0
+            - const: core_cc_sysnoc_mport_core
+            - const: core_cc_ext_if0_ibit
+            - const: core_cc_ext_if1_ibit
+            - const: audio_cc_codec_mem
+            - const: audio_cc_codec_mem0
+            - const: audio_cc_codec_mem1
+            - const: audio_cc_codec_mem2
+            - const: aon_cc_va_mem0
+        reg:
+          minItems: 6
+          maxItems: 6
+        reg-names:
+          items:
+            - const: lpass-hdmiif
+            - const: lpass-lpaif
+            - const: lpass-rxtx-cdc-dma-lpm
+            - const: lpass-rxtx-lpaif
+            - const: lpass-va-lpaif
+            - const: lpass-va-cdc-dma-lpm
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: lpass-irq-lpaif
+            - const: lpass-irq-hdmi
+            - const: lpass-irq-vaif
+            - const: lpass-irq-rxtxif
+        power-domain-names:
+          items:
+            - const: lcx
+
+      required:
+        - iommus
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/sound/sc7180-lpass.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        lpass@62d80000 {
+            compatible = "qcom,sc7180-lpass-cpu";
+
+            reg = <0 0x62d87000 0 0x68000>,
+                  <0 0x62f00000 0 0x29000>;
+            reg-names = "lpass-hdmiif",
+                        "lpass-lpaif";
+            iommus = <&apps_smmu 0x1020 0>,
+                     <&apps_smmu 0x1032 0>;
+            power-domains = <&lpass_hm 0>;
+
+            clocks = <&gcc 131>,
+                 <&lpasscorecc 6>,
+                 <&lpasscorecc 7>,
+                 <&lpasscorecc 10>,
+                 <&lpasscorecc 8>,
+                 <&lpasscorecc 9>;
+
+            clock-names = "pcnoc-sway-clk", "audio-core",
+                          "mclk0", "pcnoc-mport-clk",
+                          "mi2s-bit-clk0", "mi2s-bit-clk1";
+
+            interrupts = <0 160 1>,
+                         <0 268 1>;
+            interrupt-names = "lpass-irq-lpaif",
+                              "lpass-irq-hdmi";
+            #sound-dai-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* Optional to set different MI2S SD lines */
+            dai-link@0 {
+                reg = <MI2S_PRIMARY>;
+                qcom,playback-sd-lines = <1>;
+                qcom,capture-sd-lines = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
new file mode 100644
index 0000000000..ec4b0ac8ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-rx-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) RX Macro audio codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-rx-macro
+      - qcom,sm8250-lpass-rx-macro
+      - qcom,sm8450-lpass-rx-macro
+      - qcom,sm8550-lpass-rx-macro
+      - qcom,sc8280xp-lpass-rx-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+
+  clock-output-names:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-lpass-rx-macro
+    then:
+      properties:
+        clock-names:
+          oneOf:
+            - items:   # for ADSP based platforms
+                - const: mclk
+                - const: npl
+                - const: macro
+                - const: dcodec
+                - const: fsgen
+            - items:   # for ADSP bypass based platforms
+                - const: mclk
+                - const: npl
+                - const: fsgen
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-lpass-rx-macro
+            - qcom,sm8250-lpass-rx-macro
+            - qcom,sm8450-lpass-rx-macro
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: mclk
+            - const: npl
+            - const: macro
+            - const: dcodec
+            - const: fsgen
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-lpass-rx-macro
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+            - const: fsgen
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3200000 {
+      compatible = "qcom,sm8250-lpass-rx-macro";
+      reg = <0x3200000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&audiocc 0>,
+               <&audiocc 1>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+      clock-output-names = "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
new file mode 100644
index 0000000000..4156981fe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-tx-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) TX Macro audio codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-tx-macro
+      - qcom,sm8250-lpass-tx-macro
+      - qcom,sm8450-lpass-tx-macro
+      - qcom,sm8550-lpass-tx-macro
+      - qcom,sc8280xp-lpass-tx-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+
+  clock-output-names:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-lpass-tx-macro
+    then:
+      properties:
+        clock-names:
+          oneOf:
+            - items:   # for ADSP based platforms
+                - const: mclk
+                - const: npl
+                - const: macro
+                - const: dcodec
+                - const: fsgen
+            - items:   # for ADSP bypass based platforms
+                - const: mclk
+                - const: npl
+                - const: fsgen
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-lpass-tx-macro
+            - qcom,sm8250-lpass-tx-macro
+            - qcom,sm8450-lpass-tx-macro
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: mclk
+            - const: npl
+            - const: macro
+            - const: dcodec
+            - const: fsgen
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-lpass-tx-macro
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+            - const: fsgen
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3220000 {
+      compatible = "qcom,sm8250-lpass-tx-macro";
+      reg = <0x3220000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&aoncc 0>,
+               <&aoncc 1>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+      clock-output-names = "mclk";
+      qcom,dmic-sample-rate = <600000>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
new file mode 100644
index 0000000000..4a56108c44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-va-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-va-macro
+      - qcom,sm8250-lpass-va-macro
+      - qcom,sm8450-lpass-va-macro
+      - qcom,sm8550-lpass-va-macro
+      - qcom,sc8280xp-lpass-va-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-micb-supply:
+    description: phandle to voltage regulator of MIC Bias
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clock-names
+  - clocks
+
+allOf:
+  - $ref: dai-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpass-va-macro
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sm8250-lpass-va-macro
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-lpass-va-macro
+              - qcom,sm8450-lpass-va-macro
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+            - const: npl
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-lpass-va-macro
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3370000 {
+      compatible = "qcom,sm8250-lpass-va-macro";
+      reg = <0x3370000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&aoncc 0>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "mclk", "macro", "dcodec";
+      clock-output-names = "fsgen";
+      qcom,dmic-sample-rate = <600000>;
+      vdd-micb-supply = <&vreg_s4a_1p8>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
new file mode 100644
index 0000000000..eea7609d1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-wsa-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpass-wsa-macro
+      - qcom,sm8250-lpass-wsa-macro
+      - qcom,sm8450-lpass-wsa-macro
+      - qcom,sm8550-lpass-wsa-macro
+      - qcom,sc8280xp-lpass-wsa-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+
+  clock-names:
+    minItems: 4
+    maxItems: 6
+
+  clock-output-names:
+    maxItems: 1
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-micb-supply:
+    description: phandle to voltage regulator of MIC Bias
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+allOf:
+  - $ref: dai-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-lpass-wsa-macro
+            - qcom,sm8450-lpass-wsa-macro
+            - qcom,sc8280xp-lpass-wsa-macro
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: mclk
+            - const: npl
+            - const: macro
+            - const: dcodec
+            - const: fsgen
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8250-lpass-wsa-macro
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: mclk
+            - const: npl
+            - const: macro
+            - const: dcodec
+            - const: va
+            - const: fsgen
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-lpass-wsa-macro
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: mclk
+            - const: macro
+            - const: dcodec
+            - const: fsgen
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3240000 {
+      compatible = "qcom,sm8250-lpass-wsa-macro";
+      reg = <0x3240000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&audiocc 1>,
+               <&audiocc 0>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&aoncc LPASS_CDC_VA_MCLK>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+      clock-output-names = "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt
new file mode 100644
index 0000000000..1c8e4cb251
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt
@@ -0,0 +1,20 @@
+msm8916 digital audio CODEC
+
+## Bindings for codec core in lpass:
+
+Required properties
+ - compatible = "qcom,msm8916-wcd-digital-codec";
+ - reg: address space for lpass codec.
+ - clocks: Handle to mclk and ahbclk
+ - clock-names: should be "mclk", "ahbix-clk".
+
+Example:
+
+audio-codec@771c000{
+	compatible = "qcom,msm8916-wcd-digital-codec";
+	reg = <0x0771c000 0x400>;
+	clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+		 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "ahbix-clk", "mclk";
+	#sound-dai-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml
new file mode 100644
index 0000000000..94e7a18609
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,pm8916-wcd-analog-codec.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8916 WCD Analog Audio Codec
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The analog WCD audio codec found on Qualcomm PM8916 PMIC.
+
+properties:
+  compatible:
+    const: qcom,pm8916-wcd-analog-codec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: cdc_spk_cnp_int
+      - const: cdc_spk_clip_int
+      - const: cdc_spk_ocp_int
+      - const: mbhc_ins_rem_det1
+      - const: mbhc_but_rel_det
+      - const: mbhc_but_press_det
+      - const: mbhc_ins_rem_det
+      - const: mbhc_switch_int
+      - const: cdc_ear_ocp_int
+      - const: cdc_hphr_ocp_int
+      - const: cdc_hphl_ocp_det
+      - const: cdc_ear_cnp_int
+      - const: cdc_hphr_cnp_int
+      - const: cdc_hphl_cnp_int
+
+  vdd-cdc-io-supply:
+    description: 1.8V buck supply
+
+  vdd-cdc-tx-rx-cx-supply:
+    description: 1.8V SIDO buck supply
+
+  vdd-micbias-supply:
+    description: micbias supply
+
+  qcom,mbhc-vthreshold-low:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Array of 5 threshold voltages in mV for 5-button detection on
+      headset when MBHC is powered by an internal current source.
+    minItems: 5
+    maxItems: 5
+
+  qcom,mbhc-vthreshold-high:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Array of 5 threshold voltages in mV for 5-button detection on
+      headset when MBHC is powered from micbias.
+    minItems: 5
+    maxItems: 5
+
+  qcom,micbias-lvl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Voltage (mV) for Mic Bias
+
+  qcom,hphl-jack-type-normally-open:
+    type: boolean
+    description:
+      True if the HPHL pin on the jack is NO (Normally Open), false if it's
+      NC (Normally Closed).
+
+  qcom,gnd-jack-type-normally-open:
+    type: boolean
+    description:
+      True if the GND pin on the jack is NO (Normally Open), false if it's
+      NC (Normally Closed).
+
+  qcom,micbias1-ext-cap:
+    type: boolean
+    description:
+      True if micbias1 has an external capacitor.
+
+  qcom,micbias2-ext-cap:
+    type: boolean
+    description:
+      True if micbias2 has an external capacitor.
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@1 {
+      compatible = "qcom,pm8916", "qcom,spmi-pmic";
+      reg = <0x1 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      audio-codec@f000 {
+        compatible = "qcom,pm8916-wcd-analog-codec";
+        reg = <0xf000>;
+        qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+        qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+        interrupt-parent = <&spmi_bus>;
+        interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+              <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+              <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+        interrupt-names = "cdc_spk_cnp_int",
+                          "cdc_spk_clip_int",
+                          "cdc_spk_ocp_int",
+                          "mbhc_ins_rem_det1",
+                          "mbhc_but_rel_det",
+                          "mbhc_but_press_det",
+                          "mbhc_ins_rem_det",
+                          "mbhc_switch_int",
+                          "cdc_ear_ocp_int",
+                          "cdc_hphr_ocp_int",
+                          "cdc_hphl_ocp_det",
+                          "cdc_ear_cnp_int",
+                          "cdc_hphr_cnp_int",
+                          "cdc_hphl_cnp_int";
+        vdd-cdc-io-supply = <&pm8916_l5>;
+        vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+        vdd-micbias-supply = <&pm8916_l13>;
+        #sound-dai-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml
new file mode 100644
index 0000000000..3f11d2e183
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6adm-routing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Device Manager (Q6ADM) routing
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Qualcomm Audio Device Manager (Q6ADM) routing node represents routing
+  specific configuration.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6adm-routing
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    routing {
+        compatible = "qcom,q6adm-routing";
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml
new file mode 100644
index 0000000000..fe14a97ea6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Device Manager (Q6ADM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6adm
+
+  routing:
+    type: object
+    $ref: /schemas/sound/qcom,q6adm-routing.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP LPASS audio routing
+
+required:
+  - compatible
+  - routing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@8 {
+            compatible = "qcom,q6adm";
+            reg = <APR_SVC_ADM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            routing {
+                compatible = "qcom,q6adm-routing";
+                #sound-dai-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml
new file mode 100644
index 0000000000..297aa362aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6afe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio FrontEnd (Q6AFE)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe
+
+  clock-controller:
+    $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP LPASS clock controller
+
+  dais:
+    type: object
+    $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+required:
+  - compatible
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@4 {
+            compatible = "qcom,q6afe";
+            reg = <APR_SVC_AFE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
+            };
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@22 {
+                    reg = <QUATERNARY_MI2S_RX>;
+                    qcom,sd-lines = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
new file mode 100644
index 0000000000..9e5b30d9c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Process Manager Digital Audio Interfaces
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APM DAIs in DSP
+
+properties:
+  compatible:
+    const: qcom,q6apm-dais
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    dais {
+        compatible = "qcom,q6apm-dais";
+        iommus = <&apps_smmu 0x1801 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml
new file mode 100644
index 0000000000..894e653d37
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6apm-lpass-dais.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm DSP LPASS (Low Power Audio SubSystem) Audio Ports
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6apm-lpass-dais
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dais {
+        compatible = "qcom,q6apm-lpass-dais";
+        #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
new file mode 100644
index 0000000000..ef1965aca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6apm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Process Manager (Q6APM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6apm
+
+  bedais:
+    type: object
+    $ref: /schemas/sound/qcom,q6apm-lpass-dais.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+  dais:
+    type: object
+    $ref: /schemas/sound/qcom,q6apm-dai.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - bedais
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+
+    gpr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+            reg = <GPR_APM_MODULE_IID>;
+            compatible = "qcom,q6apm";
+            #sound-dai-cells = <0>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
+
+            bedais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #sound-dai-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml
new file mode 100644
index 0000000000..ce811942a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6asm-dais.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Stream Manager (Q6ASM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Q6ASM is one of the APR audio services on Q6DSP. Each of its subnodes
+  represent a dai with board specific configuration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6asm-dais
+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^dai@[0-9]+$":
+    type: object
+    description:
+      Q6ASM Digital Audio Interface
+
+    properties:
+      reg:
+        maxItems: 1
+
+      direction:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description: |
+          The direction of the dai stream::
+           - Q6ASM_DAI_TX_RX (0) for both tx and rx
+           - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
+           - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
+
+      is-compress-dai:
+        type: boolean
+        description:
+          Compress offload dai.
+
+    dependencies:
+      is-compress-dai: [ direction ]
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    dais {
+        compatible = "qcom,q6asm-dais";
+        iommus = <&apps_smmu 0x1821 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #sound-dai-cells = <1>;
+
+        dai@0 {
+            reg = <0>;
+        };
+
+        dai@1 {
+            reg = <1>;
+        };
+
+        dai@2 {
+            reg = <2>;
+            is-compress-dai;
+            direction = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
new file mode 100644
index 0000000000..cb49f9667c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6asm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Stream Manager (Q6ASM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6asm
+
+  dais:
+    type: object
+    $ref: /schemas/sound/qcom,q6asm-dais.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP audio ports
+
+required:
+  - compatible
+  - dais
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@7 {
+            compatible = "qcom,q6asm";
+            reg = <APR_SVC_ASM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6asm-dais";
+                iommus = <&apps_smmu 0x1821 0x0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@0 {
+                    reg = <0>;
+                };
+
+                dai@1 {
+                    reg = <1>;
+                };
+
+                dai@2 {
+                    reg = <2>;
+                    is-compress-dai;
+                    direction = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.yaml b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml
new file mode 100644
index 0000000000..e240712de9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6core.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Core (Q6Core)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6core
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@3 {
+            compatible = "qcom,q6core";
+            reg = <APR_SVC_ADSP_CORE>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
new file mode 100644
index 0000000000..3552c44137
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm DSP LPASS Clock Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm DSP Clock Controller
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe-clocks
+      - qcom,q6prm-lpass-clocks
+
+  '#clock-cells':
+    const: 2
+    description:
+      Clock Id is followed by clock coupling attributes.
+        1 = for no coupled clock
+        2 = for dividend of the coupled clock
+        3 = for divisor of the coupled clock
+        4 = for inverted and no couple clock
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "qcom,q6afe-clocks";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
new file mode 100644
index 0000000000..08c618e7e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm DSP LPASS Audio ports
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe-dais
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+# Digital Audio Interfaces
+patternProperties:
+  '^dai@[0-9]+$':
+    type: object
+    description:
+      Q6DSP Digital Audio Interfaces.
+
+    properties:
+      reg:
+        description:
+          Digital Audio Interface ID
+
+      qcom,sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          List of serial data lines used by this dai.should be one or more of the 0-3 sd lines.
+        minItems: 1
+        maxItems: 4
+        uniqueItems: true
+        items:
+          minimum: 0
+          maximum: 3
+
+      qcom,tdm-sync-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          TDM Synchronization mode
+            0 = Short sync bit mode
+            1 = Long sync mode
+            2 = Short sync slot mode
+
+      qcom,tdm-sync-src:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Synchronization source
+            0 = External source
+            1 = Internal source
+
+      qcom,tdm-data-out:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Data out signal to drive with other masters
+            0 = Disable
+            1 = Enable
+
+      qcom,tdm-invert-sync:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Invert the sync
+            0 = Normal
+            1 = Invert
+
+      qcom,tdm-data-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          TDM Number of bit clock to delay data
+            0 = 0 bit clock cycle
+            1 = 1 bit clock cycle
+            2 = 2 bit clock cycle
+
+      qcom,tdm-data-align:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          Indicate how data is packed within the slot. For example, 32 slot
+          width in case of sample bit width is 24TDM Invert the sync.
+            0 = MSB
+            1 = LSB
+
+    required:
+      - reg
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              contains:
+                # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7
+                items:
+                  minimum: 24
+                  maximum: 103
+        then:
+          required:
+            - qcom,tdm-sync-mode
+            - qcom,tdm-sync-src
+            - qcom,tdm-data-out
+            - qcom,tdm-invert-sync
+            - qcom,tdm-data-delay
+            - qcom,tdm-data-align
+
+      - if:
+          properties:
+            reg:
+              contains:
+                # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and
+                # QUINARY_MI2S_RX - QUINARY_MI2S_TX
+                items:
+                  oneOf:
+                    - minimum: 16
+                      maximum: 23
+                    - minimum: 127
+                      maximum: 128
+        then:
+          required:
+            - qcom,sd-lines
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+    dais {
+        compatible = "qcom,q6afe-dais";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #sound-dai-cells = <1>;
+
+        dai@22 {
+            reg = <QUATERNARY_MI2S_RX>;
+            qcom,sd-lines = <0 1 2 3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml
new file mode 100644
index 0000000000..f6dbb1267b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6prm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Proxy Resource Manager (Q6PRM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+  - $ref: /schemas/soc/qcom/qcom,apr-services.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6prm
+
+  clock-controller:
+    $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+    unevaluatedProperties: false
+    description: Qualcomm DSP LPASS clock controller
+
+required:
+  - compatible
+  - clock-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+
+    gpr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@2 {
+            reg = <GPR_PRM_MODULE_IID>;
+            compatible = "qcom,q6prm";
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6prm-lpass-clocks";
+                #clock-cells = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
new file mode 100644
index 0000000000..262de7a60a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. ASoC sound card drivers
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  This bindings describes Qualcomm SoC based sound cards
+  which uses LPASS internal codec for audio.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - lenovo,yoga-c630-sndcard
+              - qcom,db845c-sndcard
+          - const: qcom,sdm845-sndcard
+      - enum:
+          - qcom,apq8016-sbc-sndcard
+          - qcom,msm8916-qdsp6-sndcard
+          - qcom,qrb5165-rb5-sndcard
+          - qcom,sc8280xp-sndcard
+          - qcom,sdm845-sndcard
+          - qcom,sm8250-sndcard
+          - qcom,sm8450-sndcard
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source. Valid names could be power supplies,
+      MicBias of codec and the jacks on the board.
+
+  aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User visible long sound card name
+
+  pin-switches:
+    description: List of widget names for which pin switches should be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  # Only valid for some compatibles (see allOf if below)
+  reg: true
+  reg-names: true
+
+patternProperties:
+  ".*-dai-link$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      platform:
+        description: Holds subnode which indicates platform dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            maxItems: 1
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        additionalProperties: false
+
+        properties:
+          sound-dai:
+            minItems: 1
+            maxItems: 4
+
+    required:
+      - link-name
+      - cpu
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - model
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8016-sbc-sndcard
+              - qcom,msm8916-qdsp6-sndcard
+    then:
+      properties:
+        reg:
+          items:
+            - description: Microphone I/O mux register address
+            - description: Speaker I/O mux register address
+        reg-names:
+          items:
+            - const: mic-iomux
+            - const: spkr-iomux
+      required:
+        - compatible
+        - model
+        - reg
+        - reg-names
+    else:
+      properties:
+        reg: false
+        reg-names: false
+
+additionalProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+    sound {
+        compatible = "qcom,qrb5165-rb5-sndcard";
+        model = "Qualcomm-qrb5165-RB5-WSA8815-Speakers-DMIC0";
+        audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+                    "SpkrRight IN", "WSA_SPK2 OUT",
+                    "VA DMIC0", "vdd-micb",
+                    "VA DMIC1", "vdd-micb";
+
+        mm1-dai-link {
+            link-name = "MultiMedia0";
+            cpu {
+                sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+            };
+        };
+
+        mm2-dai-link {
+            link-name = "MultiMedia2";
+            cpu {
+                sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+            };
+        };
+
+        mm3-dai-link {
+            link-name = "MultiMedia3";
+            cpu {
+                sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+            };
+        };
+
+        hdmi-dai-link {
+            link-name = "HDMI Playback";
+            cpu {
+                sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+
+            codec {
+                sound-dai = <&lt9611_codec 0>;
+            };
+        };
+
+        wsa-dai-link {
+            link-name = "WSA Playback";
+            cpu {
+                sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+
+            codec {
+                sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro>;
+            };
+        };
+
+        va-dai-link {
+            link-name = "VA Capture";
+            cpu {
+                sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+            };
+
+            platform {
+                sound-dai = <&q6routing>;
+            };
+
+            codec {
+                sound-dai = <&vamacro 0>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound@7702000 {
+        compatible = "qcom,apq8016-sbc-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "DB410c";
+        audio-routing =
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS External1";
+
+        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+        pinctrl-names = "default", "sleep";
+
+        quaternary-dai-link {
+            link-name = "ADV7533";
+            cpu {
+                sound-dai = <&lpass MI2S_QUATERNARY>;
+            };
+            codec {
+                sound-dai = <&adv_bridge 0>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "WCD";
+            cpu {
+                sound-dai = <&lpass MI2S_PRIMARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+
+        tertiary-dai-link {
+            link-name = "WCD-Capture";
+            cpu {
+                sound-dai = <&lpass MI2S_TERTIARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+    sound@7702000 {
+        compatible = "qcom,msm8916-qdsp6-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "msm8916";
+        widgets =
+            "Speaker", "Speaker",
+            "Headphone", "Headphones";
+        pin-switches = "Speaker";
+        audio-routing =
+            "Speaker", "Speaker Amp OUT",
+            "Speaker Amp IN", "HPH_R",
+            "Headphones", "HPH_L",
+            "Headphones", "HPH_R",
+            "AMIC1", "MIC BIAS Internal1",
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS Internal3";
+        aux-devs = <&speaker_amp>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cdc_pdm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus>;
+
+        mm1-dai-link {
+            link-name = "MultiMedia1";
+            cpu {
+                sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "Primary MI2S";
+            cpu {
+                sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+            };
+            platform {
+                sound-dai = <&q6routing>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml
new file mode 100644
index 0000000000..34f8fe4da9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd9335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9335 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC with in-built
+  Soundwire controller and interrupt mux. It supports both I2S/I2C and SLIMbus
+  audio interfaces.
+
+properties:
+  compatible:
+    const: slim217,1a0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: slimbus
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: intr1
+      - const: intr2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  slim-ifc-dev:
+    description: SLIM IFC device interface
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#sound-dai-cells':
+    const: 1
+
+  vdd-buck-supply:
+    description: 1.8V buck supply
+
+  vdd-buck-sido-supply:
+    description: 1.8V SIDO buck supply
+
+  vdd-io-supply:
+    description: 1.8V I/O supply
+
+  vdd-micbias-supply:
+    description: micbias supply
+
+  vdd-rx-supply:
+    description: 1.8V rx supply
+
+  vdd-tx-supply:
+    description: 1.8V tx supply
+
+  vdd-vbat-supply:
+    description: vbat supply
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      required:
+        - slim-ifc-dev
+    then:
+      required:
+        - clocks
+        - clock-names
+        - interrupts
+        - interrupt-names
+        - interrupt-controller
+        - '#interrupt-cells'
+        - reset-gpios
+        - slim-ifc-dev
+        - '#sound-dai-cells'
+        - vdd-buck-supply
+        - vdd-buck-sido-supply
+        - vdd-io-supply
+        - vdd-rx-supply
+        - vdd-tx-supply
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+        interrupts: false
+        interrupt-names: false
+        interrupt-controller: false
+        '#interrupt-cells': false
+        reset-gpios: false
+        slim-ifc-dev: false
+        '#sound-dai-cells': false
+        vdd-buck-supply: false
+        vdd-buck-sido-supply: false
+        vdd-io-supply: false
+        vdd-micbias-supply: false
+        vdd-rx-supply: false
+        vdd-tx-supply: false
+        vdd-vbat-supply: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    tasha_ifd: codec@0,0 {
+        compatible = "slim217,1a0";
+        reg = <0 0>;
+    };
+
+    codec@1,0 {
+        compatible = "slim217,1a0";
+        reg = <1 0>;
+
+        clock-names = "mclk", "slimbus";
+        clocks = <&div1_mclk>, <&rpmcc RPM_SMD_BB_CLK1>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+                     <53 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "intr1", "intr2";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+        slim-ifc-dev = <&tasha_ifd>;
+        #sound-dai-cells = <1>;
+
+        vdd-buck-supply = <&vreg_s4a_1p8>;
+        vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+        vdd-tx-supply = <&vreg_s4a_1p8>;
+        vdd-rx-supply = <&vreg_s4a_1p8>;
+        vdd-io-supply = <&vreg_s4a_1p8>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
new file mode 100644
index 0000000000..4df59f3b7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -0,0 +1,238 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9340/WCD9341 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
+  It has in-built Soundwire controller, pin controller, interrupt mux and
+  supports both I2S/I2C and SLIMbus audio interfaces.
+
+properties:
+  compatible:
+    const: slim217,250
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  slim-ifc-dev:
+    description: IFC device interface
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-buck-sido-supply:
+    description: A reference to the 1.8V SIDO buck supply
+
+  vdd-rx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-tx-supply:
+    description: A reference to the 1.8V tx supply
+
+  vdd-vbat-supply:
+    description: A reference to the vbat supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-micbias-supply:
+    description: A reference to the micbias supply
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  clock-output-names:
+    const: mclk
+
+  clock-frequency:
+    description: Clock frequency of output clk in Hz
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  gpio@42:
+    type: object
+    $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml#
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    description: |
+      WCD934x subnode for each slave devices. Bindings of each subnodes
+      depends on the specific driver providing the functionality and
+      documented in their respective bindings.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      required:
+        - slim-ifc-dev
+    then:
+      required:
+        - reset-gpios
+        - slim-ifc-dev
+        - interrupt-controller
+        - clock-frequency
+        - clock-output-names
+        - qcom,micbias1-microvolt
+        - qcom,micbias2-microvolt
+        - qcom,micbias3-microvolt
+        - qcom,micbias4-microvolt
+        - "#interrupt-cells"
+        - "#clock-cells"
+        - "#sound-dai-cells"
+        - "#address-cells"
+        - "#size-cells"
+      oneOf:
+        - required:
+            - interrupts-extended
+        - required:
+            - interrupts
+    else:
+      properties:
+        reset-gpios: false
+        slim-ifc-dev: false
+        interrupts: false
+        interrupt-controller: false
+        clock-frequency: false
+        clock-output-names: false
+        qcom,micbias1-microvolt: false
+        qcom,micbias2-microvolt: false
+        qcom,micbias3-microvolt: false
+        qcom,micbias4-microvolt: false
+        "#interrupt-cells": false
+        "#clock-cells": false
+        "#sound-dai-cells": false
+        "#address-cells": false
+        "#size-cells": false
+
+additionalProperties: false
+
+examples:
+  - |
+    codec@1,0{
+        compatible = "slim217,250";
+        reg  = <1 0>;
+        reset-gpios = <&tlmm 64 0>;
+        slim-ifc-dev  = <&wcd9340_ifd>;
+        #sound-dai-cells = <1>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <54 4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #clock-cells = <0>;
+        clock-frequency = <9600000>;
+        clock-output-names = "mclk";
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+        clock-names = "extclk";
+        clocks = <&rpmhcc 2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        gpio@42 {
+            compatible = "qcom,wcd9340-gpio";
+            reg = <0x42 0x2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
new file mode 100644
index 0000000000..b430dd3e18
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x-sdw.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire Slave devices on WCD9380/WCD9385
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices. This bindings is for the
+  slave devices.
+
+properties:
+  compatible:
+    const: sdw20217010d00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between slave and master tx ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between slave and master rx ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg  = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010d00";
+            reg  = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
new file mode 100644
index 0000000000..018565793a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,wcd9380-codec
+      - qcom,wcd9385-codec
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  us-euro-gpios:
+    description: GPIO spec for swapping gnd and mic segments
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle
+
+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    codec {
+        compatible = "qcom,wcd9380-codec";
+        reset-gpios = <&tlmm 32 0>;
+        #sound-dai-cells = <1>;
+        qcom,tx-device = <&wcd938x_tx>;
+        qcom,rx-device = <&wcd938x_rx>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg  = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010d00";
+            reg  = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
new file mode 100644
index 0000000000..ac03672ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA8810 is a class-D smart speaker amplifier and WSA8815
+  is a high-output power class-D smart speaker amplifier.
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: sdw10217201000
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soundwire@c2d0000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0c2d0000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217201000";
+            reg = <0 1>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217201000";
+            reg = <0 2>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
new file mode 100644
index 0000000000..ba572a7f4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WSA8830/WSA8832/WSA8835
+  smart speaker amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA883X is the Qualcomm Aqstic smart speaker amplifier
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: sdw10217020200
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD Supply for the Codec
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    soundwire-controller@3250000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x3250000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217020200";
+            reg = <0 1>;
+            powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+            sound-name-prefix = "SpkrLeft";
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217020200";
+            reg = <0 2>;
+            powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+            sound-name-prefix = "SpkrRight";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
new file mode 100644
index 0000000000..e6723c9e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa8840.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  WSA884X is a family of Qualcomm Aqstic smart speaker amplifiers using
+  SoundWire digital audio interface.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: sdw20217020400
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-1p8-supply: true
+  vdd-io-supply: true
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - '#sound-dai-cells'
+  - vdd-1p8-supply
+  - vdd-io-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    soundwire-controller {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        speaker@0,1 {
+            compatible = "sdw20217020400";
+            reg = <0 1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&spkr_2_sd_n_active>;
+            powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+            #sound-dai-cells = <0>;
+            sound-name-prefix = "SpkrRight";
+            vdd-1p8-supply = <&vreg_l15b_1p8>;
+            vdd-io-supply = <&vreg_l3g_1p2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml b/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml
new file mode 100644
index 0000000000..fb05988ff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,alc5632.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,alc5632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ALC5632 audio CODEC
+
+description: |
+  Pins on the device (for linking into audio routes):
+      * SPK_OUTP
+      * SPK_OUTN
+      * HP_OUT_L
+      * HP_OUT_R
+      * AUX_OUT_P
+      * AUX_OUT_N
+      * LINE_IN_L
+      * LINE_IN_R
+      * PHONE_P
+      * PHONE_N
+      * MIC1_P
+      * MIC1_N
+      * MIC2_P
+      * MIC2_N
+      * MICBIAS1
+      * DMICDAT
+
+maintainers:
+  - Leon Romanovsky <leon@leon.nu>
+
+properties:
+  compatible:
+    const: realtek,alc5632
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "realtek,alc5632";
+            reg = <0x1a>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
new file mode 100644
index 0000000000..7dac9e6f7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt1015p codec
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+description: |
+  Rt1015p is a rt1015 variant which does not support I2C and
+  only supports S24, 48kHz, 64FS.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt1015p
+      - realtek,rt1019p
+
+  sdb-gpios:
+    description:
+      GPIO used for shutdown control.
+      0 means shut down; 1 means power on.
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    rt1015p: rt1015p {
+        compatible = "realtek,rt1015p";
+        sdb-gpios = <&pio 175 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml
new file mode 100644
index 0000000000..5287e9c919
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1016.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1016.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reaktek RT1016 Stereo Class D Audio Amplifier
+
+maintainers:
+  - oder_chiou@realtek.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: realtek,rt1016
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "realtek,rt1016";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
new file mode 100644
index 0000000000..ecfa7a5768
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt5682s codec
+
+maintainers:
+  - Derek Fang <derek.fang@realtek.com>
+
+description: |
+  Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: realtek,rt5682s
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+    description: The CODEC's interrupt output.
+
+  realtek,dmic1-data-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 data is not used
+      - 1 # using GPIO2 pin as dmic1 data pin
+      - 2 # using GPIO5 pin as dmic1 data pin
+    description: |
+      Specify which GPIO pin be used as DMIC1 data pin.
+
+  realtek,dmic1-clk-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 clk is not used
+      - 1 # using GPIO1 pin as dmic1 clock pin
+      - 2 # using GPIO3 pin as dmic1 clock pin
+    description: |
+      Specify which GPIO pin be used as DMIC1 clk pin.
+
+  realtek,jd-src:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # No JD is used
+      - 1 # using JD1 as JD source
+    description: |
+      Specify which JD source be used.
+
+  realtek,ldo1-en-gpios:
+    description: |
+      The GPIO that controls the CODEC's LDO1_EN pin.
+
+  realtek,dmic-clk-rate-hz:
+    description: |
+      Set the clock rate (hz) for the requirement of the particular DMIC.
+
+  realtek,dmic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular DMIC.
+
+  realtek,amic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular platform or AMIC.
+
+  realtek,dmic-clk-driving-high:
+    type: boolean
+    description: |
+      Set the high driving of the DMIC clock out.
+
+  clocks:
+    items:
+      - description: phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description: Name given for DAI word clock and bit clock outputs.
+
+  "#sound-dai-cells":
+    const: 1
+
+  AVDD-supply:
+    description: Regulator supplying analog power through the AVDD pin.
+
+  MICVDD-supply:
+    description: Regulator supplying power for the microphone bias through the
+      MICVDD pin.
+
+  DBVDD-supply:
+    description: Regulator supplying I/O power through the DBVDD pin.
+
+  LDO1-IN-supply:
+    description: Regulator supplying power to the digital core and charge pump
+      through the LDO1_IN pin.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - AVDD-supply
+  - MICVDD-supply
+  - DBVDD-supply
+  - LDO1-IN-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "realtek,rt5682s";
+            reg = <0x1a>;
+            interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+            realtek,ldo1-en-gpios =
+                <&gpio 2 GPIO_ACTIVE_HIGH>;
+            realtek,dmic1-data-pin = <1>;
+            realtek,dmic1-clk-pin = <1>;
+            realtek,jd-src = <1>;
+
+            #clock-cells = <1>;
+            clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+            clocks = <&osc>;
+            clock-names = "mclk";
+
+            AVDD-supply = <&avdd_reg>;
+            MICVDD-supply = <&micvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+            LDO1-IN-supply = <&ldo1_in_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
new file mode 100644
index 0000000000..df91991699
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas FIFO-buffered Serial Interface (FSI)
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  $nodename:
+    pattern: "^sound@.*"
+
+  compatible:
+    oneOf:
+      # for FSI2 SoC
+      - items:
+          - enum:
+              - renesas,fsi2-sh73a0  # SH-Mobile AG5
+              - renesas,fsi2-r8a7740 # R-Mobile A1
+          - enum:
+              - renesas,sh_fsi2
+      # for Generic
+      - items:
+          - enum:
+              - renesas,sh_fsi
+              - renesas,sh_fsi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+patternProperties:
+  "^fsi(a|b),spdif-connection$":
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: FSI is connected by S/PDIF
+
+  "^fsi(a|b),stream-mode-support$":
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: FSI supports 16bit stream mode
+
+  "^fsi(a|b),use-internal-clock$":
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: FSI uses internal clock when master mode
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    sh_fsi2: sound@fe1f0000 {
+            compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
+            reg = <0xfe1f0000 0x400>;
+            interrupts = <GIC_SPI 9 0x4>;
+            clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+            power-domains = <&pd_a4mp>;
+
+            #sound-dai-cells = <1>;
+            fsia,spdif-connection;
+            fsia,stream-mode-support;
+            fsia,use-internal-clock;
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml b/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml
new file mode 100644
index 0000000000..a2b92dba55
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,idt821034.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas IDT821034 codec device
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+  The IDT821034 codec is a four channel PCM codec with onchip filters and
+  programmable gain setting.
+
+  The time-slots used by the codec must be set and so, the properties
+  'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+  'dai-tdm-slot-rx-mask' must be present in the ALSA sound card node for
+  sub-nodes that involve the codec. The codec uses one 8bit time-slot per
+  channel.
+  'dai-tdm-tdm-slot-with' must be set to 8.
+
+  The IDT821034 codec also supports 5 gpios (SLIC signals) per channel.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: renesas,idt821034
+
+  reg:
+    description:
+      SPI device address.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 8192000
+
+  spi-cpha: true
+
+  '#sound-dai-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - '#sound-dai-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        audio-codec@0 {
+            compatible = "renesas,idt821034";
+            reg = <0>;
+            spi-max-frequency = <8192000>;
+            spi-cpha;
+            #sound-dai-cells = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
new file mode 100644
index 0000000000..dfd768b1ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -0,0 +1,255 @@
+Renesas R-Car sound
+
+=============================================
+* Modules
+=============================================
+
+Renesas R-Car and RZ/G sound is constructed from below modules
+(for Gen2 or later)
+
+ SCU		: Sampling Rate Converter Unit
+  - SRC		: Sampling Rate Converter
+  - CMD
+   - CTU	: Channel Transfer Unit
+   - MIX	: Mixer
+   - DVC	: Digital Volume and Mute Function
+ SSIU		: Serial Sound Interface Unit
+ SSI		: Serial Sound Interface
+
+See detail of each module's channels, connection, limitation on datasheet
+
+=============================================
+* Multi channel
+=============================================
+
+Multi channel is supported by Multi-SSI, or TDM-SSI.
+
+ Multi-SSI	: 6ch case, you can use stereo x 3 SSI
+ TDM-SSI	: 6ch case, you can use TDM
+
+=============================================
+* Enable/Disable each modules
+=============================================
+
+See datasheet to check SRC/CTU/MIX/DVC connect-limitation.
+DT controls enabling/disabling module.
+${LINUX}/arch/arm/boot/dts/r8a7790-lager.dts can be good example.
+This is example of
+
+Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
+Capture:  [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
+
+see "Example: simple sound card"
+
+You can use below.
+${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
+
+	&src0	&ctu00	&mix0	&dvc0	&ssi0
+	&src1	&ctu01	&mix1	&dvc1	&ssi1
+	&src2	&ctu02			&ssi2
+	&src3	&ctu03			&ssi3
+	&src4				&ssi4
+	&src5	&ctu10			&ssi5
+	&src6	&ctu11			&ssi6
+	&src7	&ctu12			&ssi7
+	&src8	&ctu13			&ssi8
+	&src9				&ssi9
+
+=============================================
+* SRC (Sampling Rate Converter)
+=============================================
+
+ [xx]Hz        [yy]Hz
+ ------> [SRC] ------>
+
+SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
+
+ Asynchronous mode:	input data / output data are based on different clocks.
+			you can use this mode on Playback / Capture
+ Synchronous mode:	input data / output data are based on same clocks.
+			This mode will be used if system doesn't have its input clock,
+			for example digital TV case.
+			you can use this mode on Playback
+
+------------------
+**     Asynchronous mode
+------------------
+
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for Asynchronous mode"
+
+------------------
+**     Synchronous mode
+------------------
+
+	> amixer set "SRC Out Rate" on
+	> aplay xxxx.wav
+	> amixer set "SRC Out Rate" 48000
+	> amixer set "SRC Out Rate" 44100
+
+=============================================
+* CTU (Channel Transfer Unit)
+=============================================
+
+ [xx]ch        [yy]ch
+ ------> [CTU] -------->
+
+CTU can convert [xx]ch to [yy]ch, or exchange outputted channel.
+CTU conversion needs matrix settings.
+For more detail information, see below
+
+	Renesas R-Car datasheet
+	 - Sampling Rate Converter Unit (SCU)
+	  - SCU Operation
+	   - CMD Block
+	    - Functional Blocks in CMD
+
+	Renesas R-Car datasheet
+	 - Sampling Rate Converter Unit (SCU)
+	  - Register Description
+	   - CTUn Scale Value exx Register (CTUn_SVxxR)
+
+	${LINUX}/sound/soc/sh/rcar/ctu.c
+	 - comment of header
+
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for channel convert"
+
+Ex) Exchange output channel
+ Input -> Output
+  1ch  ->  0ch
+  0ch  ->  1ch
+
+  example of using matrix
+	output 0ch = (input 0ch x 0) + (input 1ch x 1)
+	output 1ch = (input 0ch x 1) + (input 1ch x 0)
+
+	amixer set "CTU Reset" on
+	amixer set "CTU Pass" 9,10
+	amixer set "CTU SV0" 0,4194304
+	amixer set "CTU SV1" 4194304,0
+
+ example of changing connection
+	amixer set "CTU Reset" on
+	amixer set "CTU Pass" 2,1
+
+=============================================
+* MIX (Mixer)
+=============================================
+
+MIX merges 2 sounds path. You can see 2 sound interface on system,
+and these sounds will be merged by MIX.
+
+	aplay -D plughw:0,0 xxxx.wav &
+	aplay -D plughw:0,1 yyyy.wav
+
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+Ex)
+	[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
+	                            |
+	[MEM] -> [SRC2] -> [CTU03] -+
+
+see "Example: simple sound card for MIXer"
+
+=============================================
+* DVC (Digital Volume and Mute Function)
+=============================================
+
+DVC controls Playback/Capture volume.
+
+Playback Volume
+	amixer set "DVC Out" 100%
+
+Capture Volume
+	amixer set "DVC In" 100%
+
+Playback Mute
+	amixer set "DVC Out Mute" on
+
+Capture Mute
+	amixer set "DVC In Mute" on
+
+Volume Ramp
+	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+	amixer set "DVC Out Ramp" on
+	aplay xxx.wav &
+	amixer set "DVC Out"  80%  // Volume Down
+	amixer set "DVC Out" 100%  // Volume Up
+
+=============================================
+* SSIU (Serial Sound Interface Unit)
+=============================================
+
+SSIU can avoid some under/over run error, because it has some buffer.
+But you can't use it if SSI was PIO mode.
+In DMA mode, you can select not to use SSIU by using "no-busif" via SSI.
+
+SSIU handles BUSIF which will be used for TDM Split mode.
+This driver is assuming that audio-graph card will be used.
+
+TDM Split mode merges 4 sounds. You can see 4 sound interface on system,
+and these sounds will be merged SSIU/SSI.
+
+	aplay -D plughw:0,0 xxxx.wav &
+	aplay -D plughw:0,1 xxxx.wav &
+	aplay -D plughw:0,2 xxxx.wav &
+	aplay -D plughw:0,3 xxxx.wav
+
+	          2ch                     8ch
+	[MEM] -> [SSIU 30] -+-> [SSIU 3] --> [Codec]
+	          2ch       |
+	[MEM] -> [SSIU 31] -+
+	          2ch       |
+	[MEM] -> [SSIU 32] -+
+	          2ch       |
+	[MEM] -> [SSIU 33] -+
+
+see "Example: simple sound card for TDM Split"
+
+=============================================
+* SSI (Serial Sound Interface)
+=============================================
+
+**  PIO mode
+
+You can use PIO mode which is for connection check by using.
+Note: The system will drop non-SSI modules in PIO mode
+even though if DT is selecting other modules.
+
+	&ssi0 {
+		pio-transfer
+	};
+
+** DMA mode without SSIU
+
+You can use DMA without SSIU.
+Note: under/over run, or noise are likely to occur
+
+	&ssi0 {
+		no-busif;
+	};
+
+** PIN sharing
+
+Each SSI can share WS pin. It is based on platform.
+This is example if SSI1 want to share WS pin with SSI0
+
+	&ssi1 {
+		shared-pin;
+	};
+
+** Multi-SSI
+
+You can use Multi-SSI.
+This is example of SSI0/SSI1/SSI2 (= for 6ch)
+
+see "Example: simple sound card for Multi channel"
+
+** TDM-SSI
+
+You can use TDM with SSI.
+This is example of TDM 6ch.
+Driver can automatically switches TDM <-> stereo mode in this case.
+
+see "Example: simple sound card for TDM"
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 0000000000..13a5a0a10f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,542 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+definitions:
+  port-def:
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: audio-graph-port.yaml#/definitions/endpoint-base
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        unevaluatedProperties: false
+
+properties:
+
+  compatible:
+    oneOf:
+      # for Gen1 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7778   # R-Car M1A
+              - renesas,rcar_sound-r8a7779   # R-Car H1
+          - const: renesas,rcar_sound-gen1
+      # for Gen2 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7742   # RZ/G1H
+              - renesas,rcar_sound-r8a7743   # RZ/G1M
+              - renesas,rcar_sound-r8a7744   # RZ/G1N
+              - renesas,rcar_sound-r8a7745   # RZ/G1E
+              - renesas,rcar_sound-r8a77470  # RZ/G1C
+              - renesas,rcar_sound-r8a7790   # R-Car H2
+              - renesas,rcar_sound-r8a7791   # R-Car M2-W
+              - renesas,rcar_sound-r8a7793   # R-Car M2-N
+              - renesas,rcar_sound-r8a7794   # R-Car E2
+          - const: renesas,rcar_sound-gen2
+      # for Gen3 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a774a1  # RZ/G2M
+              - renesas,rcar_sound-r8a774b1  # RZ/G2N
+              - renesas,rcar_sound-r8a774c0  # RZ/G2E
+              - renesas,rcar_sound-r8a774e1  # RZ/G2H
+              - renesas,rcar_sound-r8a7795   # R-Car H3
+              - renesas,rcar_sound-r8a7796   # R-Car M3-W
+              - renesas,rcar_sound-r8a77961  # R-Car M3-W+
+              - renesas,rcar_sound-r8a77965  # R-Car M3-N
+              - renesas,rcar_sound-r8a77990  # R-Car E3
+              - renesas,rcar_sound-r8a77995  # R-Car D3
+          - const: renesas,rcar_sound-gen3
+      # for Gen4 SoC
+      - items:
+          - const: renesas,rcar_sound-r8a779g0  # R-Car V4H
+          - const: renesas,rcar_sound-gen4
+      # for Generic
+      - enum:
+          - renesas,rcar_sound-gen1
+          - renesas,rcar_sound-gen2
+          - renesas,rcar_sound-gen3
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+
+  "#sound-dai-cells":
+    description: |
+      it must be 0 if your system is using single DAI
+      it must be 1 if your system is using multi  DAIs
+      This is used on simple-audio-card
+    enum: [0, 1]
+
+  "#clock-cells":
+    description: |
+      it must be 0 if your system has audio_clkout
+      it must be 1 if your system has audio_clkout0/1/2/3
+    enum: [0, 1]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clock-frequency:
+    description: for audio_clkout0/1/2/3
+
+  clkout-lr-asynchronous:
+    description: audio_clkoutn is asynchronizes with lr-clock.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  power-domains: true
+
+  resets:
+    minItems: 1
+    maxItems: 11
+
+  reset-names:
+    minItems: 1
+    maxItems: 11
+
+  clocks:
+    description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+    minItems: 1
+    maxItems: 31
+
+  clock-names:
+    description: List of necessary clock names.
+    # details are defined below
+
+  # ports is below
+  port:
+    $ref: "#/definitions/port-def"
+
+  rcar_sound,dvc:
+    description: DVC subnode.
+    type: object
+    patternProperties:
+      "^dvc-[0-1]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          dmas:
+            maxItems: 1
+          dma-names:
+            const: tx
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  rcar_sound,mix:
+    description: MIX subnode.
+    type: object
+    patternProperties:
+      "^mix-[0-1]$":
+        type: object
+        additionalProperties: false
+    additionalProperties: false
+
+  rcar_sound,ctu:
+    description: CTU subnode.
+    type: object
+    patternProperties:
+      "^ctu-[0-7]$":
+        type: object
+        additionalProperties: false
+    additionalProperties: false
+
+  rcar_sound,src:
+    description: SRC subnode.
+    type: object
+    patternProperties:
+      "^src-[0-9]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+    additionalProperties: false
+
+  rcar_sound,ssiu:
+    description: SSIU subnode.
+    type: object
+    patternProperties:
+      "^ssiu-[0-9]+$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  rcar_sound,ssi:
+    description: SSI subnode.
+    type: object
+    patternProperties:
+      "^ssi-[0-9]$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            minItems: 2
+            maxItems: 4
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+                    - txu # if no ssiu node
+                    - rxu # if no ssiu node
+
+          shared-pin:
+            description: shared clock pin
+            $ref: /schemas/types.yaml#/definitions/flag
+          pio-transfer:
+            description: PIO transfer mode
+            $ref: /schemas/types.yaml#/definitions/flag
+          no-busif:
+            description: BUSIF is not used when [mem -> SSI] via DMA case
+            $ref: /schemas/types.yaml#/definitions/flag
+        required:
+          - interrupts
+    additionalProperties: false
+
+patternProperties:
+  # For DAI base
+  'rcar_sound,dai(@[0-9a-f]+)?$':
+    description: DAI subnode.
+    type: object
+    patternProperties:
+      "^dai([0-9]+)?$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        anyOf:
+          - required:
+              - playback
+          - required:
+              - capture
+    additionalProperties: false
+
+  'ports(@[0-9a-f]+)?$':
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    unevaluatedProperties: false
+    patternProperties:
+      '^port(@[0-9a-f]+)?$':
+        $ref: "#/definitions/port-def"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: dai-common.yaml#
+
+  # --------------------
+  # reg/reg-names
+  # --------------------
+  # for Gen1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar_sound-gen1
+    then:
+      properties:
+        reg:
+          maxItems: 3
+        reg-names:
+          items:
+            enum:
+              - scu
+              - ssi
+              - adg
+  # for Gen2/Gen3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar_sound-gen2
+              - renesas,rcar_sound-gen3
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          items:
+            enum:
+              - scu
+              - adg
+              - ssiu
+              - ssi
+              - audmapp
+  # for Gen4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar_sound-gen4
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          items:
+            enum:
+              - adg
+              - ssiu
+              - ssi
+              - sdmc
+
+  # --------------------
+  # clock-names
+  # --------------------
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar_sound-gen4
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          items:
+            enum:
+              - ssi.0
+              - ssiu.0
+              - clkin
+    else:
+      properties:
+        clock-names:
+          minItems: 1
+          maxItems: 31
+          items:
+            oneOf:
+              - const: ssi-all
+              - pattern: '^ssi\.[0-9]$'
+              - pattern: '^src\.[0-9]$'
+              - pattern: '^mix\.[0-1]$'
+              - pattern: '^ctu\.[0-1]$'
+              - pattern: '^dvc\.[0-1]$'
+              - pattern: '^clk_(a|b|c|i)$'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    rcar_sound: sound@ec500000 {
+        #sound-dai-cells = <1>;
+        compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+        reg = <0xec500000 0x1000>, /* SCU  */
+              <0xec5a0000 0x100>,  /* ADG  */
+              <0xec540000 0x1000>, /* SSIU */
+              <0xec541000 0x280>,  /* SSI  */
+              <0xec740000 0x200>;  /* Audio DMAC peri peri*/
+        reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+        clocks = <&cpg CPG_MOD 1005>,                      /* SSI-ALL    */
+                 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, /* SSI9, SSI8 */
+                 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, /* SSI7, SSI6 */
+                 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, /* SSI5, SSI4 */
+                 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, /* SSI3, SSI2 */
+                 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, /* SSI1, SSI0 */
+                 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, /* SRC9, SRC8 */
+                 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, /* SRC7, SRC6 */
+                 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, /* SRC5, SRC4 */
+                 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, /* SRC3, SRC2 */
+                 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, /* SRC1, SRC0 */
+                 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, /* MIX1, MIX0 */
+                 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, /* CTU1, CTU0 */
+                 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, /* DVC0, DVC1 */
+                 <&audio_clk_a>, <&audio_clk_b>,           /* CLKA, CLKB */
+                 <&audio_clk_c>, <&audio_clk_i>;           /* CLKC, CLKI */
+
+        clock-names = "ssi-all",
+                      "ssi.9", "ssi.8",
+                      "ssi.7", "ssi.6",
+                      "ssi.5", "ssi.4",
+                      "ssi.3", "ssi.2",
+                      "ssi.1", "ssi.0",
+                      "src.9", "src.8",
+                      "src.7", "src.6",
+                      "src.5", "src.4",
+                      "src.3", "src.2",
+                      "src.1", "src.0",
+                      "mix.1", "mix.0",
+                      "ctu.1", "ctu.0",
+                      "dvc.0", "dvc.1",
+                      "clk_a", "clk_b",
+                      "clk_c", "clk_i";
+
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+
+        resets = <&cpg 1005>,
+                 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
+                 <&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
+                 <&cpg 1014>, <&cpg 1015>;
+        reset-names = "ssi-all",
+                      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+                      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+                      "ssi.1", "ssi.0";
+
+        rcar_sound,dvc {
+               dvc0: dvc-0 {
+                    dmas = <&audma0 0xbc>;
+                    dma-names = "tx";
+               };
+               dvc1: dvc-1 {
+                    dmas = <&audma0 0xbe>;
+                    dma-names = "tx";
+               };
+        };
+
+        rcar_sound,mix {
+            mix0: mix-0 { };
+            mix1: mix-1 { };
+        };
+
+        rcar_sound,ctu {
+            ctu00: ctu-0 { };
+            ctu01: ctu-1 { };
+            ctu02: ctu-2 { };
+            ctu03: ctu-3 { };
+            ctu10: ctu-4 { };
+            ctu11: ctu-5 { };
+            ctu12: ctu-6 { };
+            ctu13: ctu-7 { };
+        };
+
+        rcar_sound,src {
+            src0: src-0 {
+                status = "disabled";
+            };
+            src1: src-1 {
+                interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                dmas = <&audma0 0x87>, <&audma1 0x9c>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after src-2 */
+        };
+
+        rcar_sound,ssiu {
+            ssiu00: ssiu-0 {
+                dmas = <&audma0 0x15>, <&audma1 0x16>;
+                dma-names = "rx", "tx";
+            };
+            ssiu01: ssiu-1 {
+                dmas = <&audma0 0x35>, <&audma1 0x36>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after ssiu-2 */
+        };
+
+        rcar_sound,ssi {
+            ssi0: ssi-0 {
+                interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+                dmas = <&audma0 0x01>, <&audma1 0x02>;
+                dma-names = "rx", "tx";
+            };
+            ssi1: ssi-1 {
+                interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+                dmas = <&audma0 0x03>, <&audma1 0x04>;
+                dma-names = "rx", "tx";
+            };
+            /* skip other ssi-2 */
+        };
+
+        /* DAI base */
+        rcar_sound,dai {
+            dai0 {
+                playback = <&ssi5>, <&src5>;
+                capture  = <&ssi6>;
+            };
+            dai1 {
+                playback = <&ssi3>;
+            };
+            dai2 {
+                capture  = <&ssi4>;
+            };
+            dai3 {
+                playback = <&ssi7>;
+            };
+            dai4 {
+                capture  = <&ssi8>;
+            };
+        };
+
+        /* assume audio-graph */
+        port {
+            rsnd_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+
+                dai-format = "left_j";
+                bitclock-master = <&rsnd_endpoint0>;
+                frame-master = <&rsnd_endpoint0>;
+
+                playback = <&ssi0>, <&src0>, <&dvc0>;
+                capture  = <&ssi1>, <&src1>, <&dvc1>;
+            };
+        };
+    };
+
+    /* assume audio-graph */
+    codec {
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&rsnd_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
new file mode 100644
index 0000000000..3b5ae45eee
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-ssi  # RZ/G2UL
+          - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
+          - renesas,r9a07g054-ssi  # RZ/V2L
+      - const: renesas,rz-ssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 3
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: int_req
+          - const: dma_rx
+          - const: dma_tx
+      - items:
+          - const: int_req
+          - const: dma_rt
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ssi
+      - const: ssi_sfr
+      - const: audio_clk1
+      - const: audio_clk2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+    description:
+      The first cell represents a phandle to dmac.
+      The second cell specifies the encoded MID/RID values of the SSI port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9]   - Specifies MID/RID value of a SSI channel as below
+                    MID/RID value of SSI rx0 = 0x256
+                    MID/RID value of SSI tx0 = 0x255
+                    MID/RID value of SSI rx1 = 0x25a
+                    MID/RID value of SSI tx1 = 0x259
+                    MID/RID value of SSI rt2 = 0x25f
+                    MID/RID value of SSI rx3 = 0x262
+                    MID/RID value of SSI tx3 = 0x261
+      bit[10]     - HIEN = 1, Detects a request in response to the rising edge
+                    of the signal
+      bit[11]     - LVL = 0, Detects based on the edge
+      bits[12:14] - AM = 2, Bus cycle mode
+      bit[15]     - TM = 0, Single transfer mode
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rt
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    ssi0: ssi@10049c00 {
+        compatible = "renesas,r9a07g044-ssi",
+                     "renesas,rz-ssi";
+            reg = <0x10049c00 0x400>;
+            interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "int_req", "dma_rx", "dma_tx";
+            clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+                     <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+                     <&audio_clk1>,
+                     <&audio_clk2>;
+            clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+            dmas = <&dmac 0x2655>,
+                   <&dmac 0x2656>;
+            dma-names = "tx", "rx";
+            #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
new file mode 100644
index 0000000000..a1242e8e06
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/richtek,rt9120.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9120 Class-D audio amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier
+  delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input
+  voltage  range from 4.5V to 26.4V to meet the need on most common
+  applications like as TV, monitors. home entertainment, electronic music
+  equipment.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9120
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  pwdnn-gpios:
+    description: GPIO used for power down, low active
+    maxItems: 1
+
+  dvdd-supply:
+    description: |
+      Supply for the default on DVDD power, voltage domain must be 3P3V or 1P8V
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - dvdd-supply
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rt9120@1a {
+        compatible = "richtek,rt9120";
+        reg = <0x1a>;
+        pwdnn-gpios = <&gpio26 2 0>;
+        dvdd-supply = <&vdd_io_reg>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
new file mode 100644
index 0000000000..7bb6c5dff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S/TDM Controller
+
+description:
+  The Rockchip I2S/TDM Controller is a Time Division Multiplexed
+  audio interface found in various Rockchip SoCs, allowing up
+  to 8 channels of audio over a serial interface.
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-i2s-tdm
+      - rockchip,rk1808-i2s-tdm
+      - rockchip,rk3308-i2s-tdm
+      - rockchip,rk3568-i2s-tdm
+      - rockchip,rk3588-i2s-tdm
+      - rockchip,rv1126-i2s-tdm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - rx
+        - tx
+
+  clocks:
+    minItems: 3
+    items:
+      - description: clock for TX
+      - description: clock for RX
+      - description: AHB clock driving the interface
+      - description:
+          Parent clock for mclk_tx (only required when using mclk-calibrate)
+      - description:
+          Parent clock for mclk_rx (only required when using mclk-calibrate)
+      - description:
+          Clock for sample rates that are an integer multiple of 8000
+          (only required when using mclk-calibrate)
+      - description:
+          Clock for sample rates that are an integer multiple of 11025
+          (only required when using mclk-calibrate)
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mclk_tx
+      - const: mclk_rx
+      - const: hclk
+      - const: mclk_tx_src
+      - const: mclk_rx_src
+      - const: mclk_root0
+      - const: mclk_root1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    description: resets for the tx and rx directions
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - tx-m
+        - rx-m
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+
+  rockchip,trcm-sync-tx-only:
+    type: boolean
+    description: Use TX BCLK/LRCK for both TX and RX.
+
+  rockchip,trcm-sync-rx-only:
+    type: boolean
+    description: Use RX BCLK/LRCK for both TX and RX.
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,i2s-rx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of I2S RX sdis to I2S data bus lines.
+      By default, they are mapped one-to-one.
+      rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+
+  rockchip,i2s-tx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of I2S TX sdos to I2S data bus lines.
+      By default, they are mapped one-to-one.
+      rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+
+  rockchip,io-multiplex:
+    description:
+      Specify that the GPIO lines on the I2S bus are multiplexed such that
+      the direction (input/output) needs to be dynamically adjusted.
+    type: boolean
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        i2s@fe410000 {
+            compatible = "rockchip,rk3568-i2s-tdm";
+            reg = <0x0 0xfe410000 0x0 0x1000>;
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
+                     <&cru HCLK_I2S1_8CH>;
+            clock-names = "mclk_tx", "mclk_rx", "hclk";
+            dmas = <&dmac1 3>, <&dmac1 2>;
+            dma-names = "rx", "tx";
+            resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+            reset-names = "tx-m", "rx-m";
+            rockchip,trcm-sync-tx-only;
+            rockchip,grf = <&grf>;
+            #sound-dai-cells = <0>;
+            pinctrl-names = "default";
+            pinctrl-0 =
+                <&i2s1m0_sclktx
+                &i2s1m0_sclkrx
+                &i2s1m0_lrcktx
+                &i2s1m0_lrckrx
+                &i2s1m0_sdi0
+                &i2s1m0_sdi1
+                &i2s1m0_sdi2
+                &i2s1m0_sdi3
+                &i2s1m0_sdo0
+                &i2s1m0_sdo1
+                &i2s1m0_sdo2
+                &i2s1m0_sdo3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml
new file mode 100644
index 0000000000..ff9e400494
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PDM controller
+
+description:
+  The Pulse Density Modulation Interface Controller (PDMC) is
+  a PDM interface controller and decoder that support PDM format.
+  It integrates a clock generator driving the PDM microphone
+  and embeds filters which decimate the incoming bit stream to
+  obtain most common audio rates.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,pdm
+      - rockchip,px30-pdm
+      - rockchip,rk1808-pdm
+      - rockchip,rk3308-pdm
+      - rockchip,rk3568-pdm
+      - rockchip,rv1126-pdm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for PDM controller
+      - description: clock for PDM BUS
+
+  clock-names:
+    items:
+      - const: pdm_clk
+      - const: pdm_hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: reset for PDM controller
+
+  reset-names:
+    items:
+      - const: pdm-m
+
+  rockchip,path-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of PDM SDIx to PDM PATHx.
+      By default, they are mapped one-to-one.
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3328-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pdm@ff040000 {
+            compatible = "rockchip,pdm";
+            reg = <0x0 0xff040000 0x0 0x1000>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+            clock-names = "pdm_clk", "pdm_hclk";
+            dmas = <&dmac 16>;
+            dma-names = "rx";
+            #sound-dai-cells = <0>;
+            pinctrl-names = "default", "sleep";
+            pinctrl-0 = <&pdmm0_clk
+                         &pdmm0_sdi0
+                         &pdmm0_sdi1
+                         &pdmm0_sdi2
+                         &pdmm0_sdi3>;
+            pinctrl-1 = <&pdmm0_clk_sleep
+                         &pdmm0_sdi0_sleep
+                         &pdmm0_sdi1_sleep
+                         &pdmm0_sdi2_sleep
+                         &pdmm0_sdi3_sleep>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
new file mode 100644
index 0000000000..73577ac1b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt
@@ -0,0 +1,36 @@
+ROCKCHIP RK3288 with HDMI and analog audio
+
+Required properties:
+- compatible: "rockchip,rk3288-hdmi-analog"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+  connected to the CODEC
+- rockchip,audio-codec: The phandle of the analog audio codec.
+- rockchip,routing: A list of the connections between audio components.
+		    Each entry is a pair of strings, the first being the
+		    connection's sink, the second being the connection's
+		    source. For this driver the first string should always be
+		    "Analog".
+
+Optional properties:
+- rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the
+  headphone (when the analog output is an headphone).
+- rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone
+  (when the analog output is an headphone).
+- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+
+sound {
+	compatible = "rockchip,rk3288-hdmi-analog";
+	rockchip,model = "Analog audio output";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,audio-codec = <&es8388>;
+	rockchip,routing = "Analog", "LOUT2",
+			   "Analog", "ROUT2";
+	rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
+	rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&headphone>;
+};
+
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
new file mode 100644
index 0000000000..5cdb8bcc68
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,rk3328-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3328 internal codec
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+allOf:
+  - $ref: dai-common.yaml#
+
+
+properties:
+  compatible:
+    const: rockchip,rk3328-codec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for audio codec
+      - description: clock for I2S master clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: mclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+
+  spk-depop-time-ms:
+    default: 200
+    description:
+      Speaker depop time in msec.
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for external line driver control (typically the
+      dedicated GPIO_MUTE pin)
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3328-cru.h>
+    codec: codec@ff410000 {
+      compatible = "rockchip,rk3328-codec";
+      reg = <0xff410000 0x1000>;
+      clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>;
+      clock-names = "pclk", "mclk";
+      rockchip,grf = <&grf>;
+      mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+      spk-depop-time-ms = <100>;
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt
new file mode 100644
index 0000000000..72d3cf4c26
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3399-gru-sound.txt
@@ -0,0 +1,22 @@
+ROCKCHIP with MAX98357A/RT5514/DA7219 codecs on GRU boards
+
+Required properties:
+- compatible: "rockchip,rk3399-gru-sound"
+- rockchip,cpu: The phandle of the Rockchip I2S controller that's
+  connected to the codecs
+- rockchip,codec: The phandle of the audio codecs
+
+Optional properties:
+- dmic-wakeup-delay-ms : specify delay time (ms) for DMIC ready.
+  If this option is specified, which means it's required dmic need
+  delay for DMIC to ready so that rt5514 can avoid recording before
+  DMIC send valid data
+
+Example:
+
+sound {
+	compatible = "rockchip,rk3399-gru-sound";
+	rockchip,cpu = <&i2s0>;
+	rockchip,codec = <&max98357a &rt5514 &da7219>;
+	dmic-wakeup-delay-ms = <20>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
new file mode 100644
index 0000000000..fcb01abffa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S controller
+
+description:
+  The I2S bus (Inter-IC sound bus) is a serial link for digital
+  audio data transfer between devices in the system.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-i2s
+      - items:
+          - enum:
+              - rockchip,px30-i2s
+              - rockchip,rk1808-i2s
+              - rockchip,rk3036-i2s
+              - rockchip,rk3128-i2s
+              - rockchip,rk3188-i2s
+              - rockchip,rk3228-i2s
+              - rockchip,rk3288-i2s
+              - rockchip,rk3308-i2s
+              - rockchip,rk3328-i2s
+              - rockchip,rk3366-i2s
+              - rockchip,rk3368-i2s
+              - rockchip,rk3399-i2s
+              - rockchip,rk3588-i2s
+              - rockchip,rv1126-i2s
+          - const: rockchip,rk3066-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for I2S controller
+      - description: clock for I2S BUS
+
+  clock-names:
+    items:
+      - const: i2s_clk
+      - const: i2s_hclk
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - const: rx
+      - items:
+          - const: tx
+          - const: rx
+
+  pinctrl-names:
+    oneOf:
+      - const: default
+      - items:
+          - const: bclk_on
+          - const: bclk_off
+
+  power-domains:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: reset-m
+      - const: reset-h
+
+  resets:
+    maxItems: 2
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  rockchip,capture-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Max capture channels, if not set, 2 channels default.
+
+  rockchip,playback-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Max playback channels, if not set, 8 channels default.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property for controllers which support multi channel
+      playback/capture.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2s@ff890000 {
+      compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+      reg = <0xff890000 0x10000>;
+      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+      clock-names = "i2s_clk", "i2s_hclk";
+      dmas = <&pdma1 0>, <&pdma1 1>;
+      dma-names = "tx", "rx";
+      rockchip,capture-channels = <2>;
+      rockchip,playback-channels = <8>;
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rockchip-max98090.txt b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt
new file mode 100644
index 0000000000..e9c58b2043
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-max98090.txt
@@ -0,0 +1,42 @@
+ROCKCHIP with MAX98090 CODEC
+
+Required properties:
+- compatible: "rockchip,rockchip-audio-max98090"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+  connected to the CODEC
+
+Optional properties:
+- rockchip,audio-codec: The phandle of the MAX98090 audio codec.
+- rockchip,headset-codec: The phandle of Ext chip for jack detection. This is
+                          required if there is rockchip,audio-codec.
+- rockchip,hdmi-codec: The phandle of HDMI device for HDMI codec.
+
+Example:
+
+/* For max98090-only board. */
+sound {
+	compatible = "rockchip,rockchip-audio-max98090";
+	rockchip,model = "ROCKCHIP-I2S";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,audio-codec = <&max98090>;
+	rockchip,headset-codec = <&headsetcodec>;
+};
+
+/* For HDMI-only board. */
+sound {
+	compatible = "rockchip,rockchip-audio-max98090";
+	rockchip,model = "ROCKCHIP-I2S";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,hdmi-codec = <&hdmi>;
+};
+
+/* For max98090 plus HDMI board. */
+sound {
+	compatible = "rockchip,rockchip-audio-max98090";
+	rockchip,model = "ROCKCHIP-I2S";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,audio-codec = <&max98090>;
+	rockchip,headset-codec = <&headsetcodec>;
+	rockchip,hdmi-codec = <&hdmi>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt
new file mode 100644
index 0000000000..411a62b3ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt
@@ -0,0 +1,17 @@
+ROCKCHIP with RT5645/RT5650 CODECS
+
+Required properties:
+- compatible: "rockchip,rockchip-audio-rt5645"
+- rockchip,model: The user-visible name of this sound complex
+- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's
+  connected to the CODEC
+- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec
+
+Example:
+
+sound {
+	compatible = "rockchip,rockchip-audio-rt5645";
+	rockchip,model = "ROCKCHIP-I2S";
+	rockchip,i2s-controller = <&i2s>;
+	rockchip,audio-codec = <&rt5645>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
new file mode 100644
index 0000000000..c3c989ef2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPDIF transceiver
+
+description:
+  The S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via a coaxial or
+  fibre cable.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-spdif
+      - const: rockchip,rk3228-spdif
+      - const: rockchip,rk3328-spdif
+      - const: rockchip,rk3366-spdif
+      - const: rockchip,rk3368-spdif
+      - const: rockchip,rk3399-spdif
+      - const: rockchip,rk3568-spdif
+      - items:
+          - enum:
+              - rockchip,rk3128-spdif
+              - rockchip,rk3188-spdif
+              - rockchip,rk3288-spdif
+              - rockchip,rk3308-spdif
+          - const: rockchip,rk3066-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for SPDIF bus
+      - description: clock for SPDIF controller
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property on RK3288.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-spdif
+    then:
+      required:
+        - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spdif: spdif@1011e000 {
+      compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+      reg = <0x1011e000 0x2000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+      clock-names = "mclk", "hclk";
+      dmas = <&dmac1_s 8>;
+      dma-names = "tx";
+      #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml
new file mode 100644
index 0000000000..5abcf92bc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rohm,bd28623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD28623MUV Class D speaker amplifier for digital input
+
+description:
+  This codec does not have any control buses such as I2C, it detect
+  format and rate of I2S signal automatically. It has two signals
+  that can be connected to GPIOs reset and mute.
+
+maintainers:
+  - Katsuhiro Suzuki <katsuhiro@katsuster.net>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: rohm,bd28623
+
+  "#sound-dai-cells":
+    const: 0
+
+  VCCA-supply:
+    description:
+      regulator phandle for the VCCA (for analog) power supply
+
+  VCCP1-supply:
+    description:
+      regulator phandle for the VCCP1 (for ch1) power supply
+
+  VCCP2-supply:
+    description:
+      regulator phandle for the VCCP2 (for ch2) power supply
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low reset line
+
+  mute-gpios:
+    maxItems: 1
+    description:
+      GPIO specifier for the active low mute line
+
+required:
+  - compatible
+  - VCCA-supply
+  - VCCP1-supply
+  - VCCP2-supply
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    codec {
+      compatible = "rohm,bd28623";
+      #sound-dai-cells = <0>;
+
+      VCCA-supply = <&vcc_reg>;
+      VCCP1-supply = <&vcc_reg>;
+      VCCP2-supply = <&vcc_reg>;
+      reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+      mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt1011.txt b/Documentation/devicetree/bindings/sound/rt1011.txt
new file mode 100644
index 0000000000..02d53b9aa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1011.txt
@@ -0,0 +1,42 @@
+RT1011 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1011".
+
+- reg : The I2C address of the device. This I2C address decide by
+        two input pins (ASEL1 and ASEL2).
+        -------------------------------------
+        |   ASEL2   |  ASEL1   |  Address   |
+        -------------------------------------
+        |     0     |    0     |   0x38     |
+        -------------------------------------
+        |     0     |    1     |   0x39     |
+        -------------------------------------
+        |     1     |    0     |   0x3a     |
+        -------------------------------------
+        |     1     |    1     |   0x3b     |
+        -------------------------------------
+
+Optional properties:
+
+- realtek,temperature_calib
+  u32. The temperature was measured while doing the calibration. Units: Celsius degree
+
+- realtek,r0_calib
+  u32. This is r0 calibration data which was measured in factory mode.
+
+Pins on the device (for linking into audio routes) for RT1011:
+
+  * SPO
+
+Example:
+
+rt1011: codec@38 {
+	compatible = "realtek,rt1011";
+	reg = <0x38>;
+	realtek,temperature_calib = <25>;
+	realtek,r0_calib = <0x224050>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt
new file mode 100644
index 0000000000..e498966d43
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1015.txt
@@ -0,0 +1,23 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- realtek,power-up-delay-ms
+  Set a delay time for flush work to be completed,
+  this value is adjustable depending on platform.
+
+Example:
+
+rt1015: codec@28 {
+	compatible = "realtek,rt1015";
+	reg = <0x28>;
+	realtek,power-up-delay-ms = <50>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/rt1019.yaml
new file mode 100644
index 0000000000..3d5a91a942
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1019.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rt1019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1019 Mono Class-D Audio Amplifier
+
+maintainers:
+  - jack.yu@realtek.com
+
+properties:
+  compatible:
+    const: realtek,rt1019
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        rt1019: codec@28 {
+            compatible = "realtek,rt1019";
+            reg = <0x28>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt1308.txt b/Documentation/devicetree/bindings/sound/rt1308.txt
new file mode 100644
index 0000000000..2d46084afc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt1308.txt
@@ -0,0 +1,17 @@
+RT1308 audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1308".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1308: rt1308@10 {
+	compatible = "realtek,rt1308";
+	reg = <0x10>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt274.txt b/Documentation/devicetree/bindings/sound/rt274.txt
new file mode 100644
index 0000000000..791a1bd767
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt274.txt
@@ -0,0 +1,33 @@
+RT274 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt274".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- interrupts : The CODEC's interrupt output.
+
+
+Pins on the device (for linking into audio routes) for RT274:
+
+  * DMIC1 Pin
+  * DMIC2 Pin
+  * MIC
+  * LINE1
+  * LINE2
+  * HPO Pin
+  * SPDIF
+  * LINE3
+
+Example:
+
+rt274: codec@1c {
+	compatible = "realtek,rt274";
+	reg = <0x1c>;
+	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
new file mode 100644
index 0000000000..d2cc171f22
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -0,0 +1,37 @@
+RT5514 audio CODEC
+
+This device supports both I2C and SPI.
+
+Required properties:
+
+- compatible : "realtek,rt5514".
+
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller.
+
+- realtek,dmic-init-delay-ms
+  Set the DMIC initial delay (ms) to wait it ready for I2C.
+
+Pins on the device (for linking into audio routes) for I2C:
+
+  * DMIC1L
+  * DMIC1R
+  * DMIC2L
+  * DMIC2R
+  * AMICL
+  * AMICR
+
+Example:
+
+rt5514: codec@57 {
+	compatible = "realtek,rt5514";
+	reg = <0x57>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5616.txt b/Documentation/devicetree/bindings/sound/rt5616.txt
new file mode 100644
index 0000000000..540a4bf252
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5616.txt
@@ -0,0 +1,32 @@
+RT5616 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5616".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC.
+
+- clock-names: Should be "mclk".
+
+Pins on the device (for linking into audio routes) for RT5616:
+
+  * IN1P
+  * IN2P
+  * IN2N
+  * LOUTL
+  * LOUTR
+  * HPOL
+  * HPOR
+
+Example:
+
+rt5616: codec@1b {
+	compatible = "realtek,rt5616";
+	reg = <0x1b>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5631.txt b/Documentation/devicetree/bindings/sound/rt5631.txt
new file mode 100644
index 0000000000..56bc85232c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5631.txt
@@ -0,0 +1,48 @@
+ALC5631/RT5631 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "realtek,alc5631" or "realtek,rt5631"
+
+  - reg : the I2C address of the device.
+
+Pins on the device (for linking into audio routes):
+
+  * SPK_OUT_R_P
+  * SPK_OUT_R_N
+  * SPK_OUT_L_P
+  * SPK_OUT_L_N
+  * HP_OUT_L
+  * HP_OUT_R
+  * AUX_OUT2_LP
+  * AUX_OUT2_RN
+  * AUX_OUT1_LP
+  * AUX_OUT1_RN
+  * AUX_IN_L_JD
+  * AUX_IN_R_JD
+  * MONO_IN_P
+  * MONO_IN_N
+  * MIC1_P
+  * MIC1_N
+  * MIC2_P
+  * MIC2_N
+  * MONO_OUT_P
+  * MONO_OUT_N
+  * MICBIAS1
+  * MICBIAS2
+
+Example:
+
+alc5631: audio-codec@1a {
+	compatible = "realtek,alc5631";
+	reg = <0x1a>;
+};
+
+or
+
+rt5631: audio-codec@1a {
+	compatible = "realtek,rt5631";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
new file mode 100644
index 0000000000..0c398581d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5640.txt
@@ -0,0 +1,97 @@
+RT5640/RT5639 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5640" or "realtek,rt5639".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,in3-differential
+  Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended.
+
+- realtek,lout-differential
+  Boolean. Indicate LOUT output is differential, rather than stereo.
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN1P pin as dmic1 data pin
+  2: using GPIO3 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN1N pin as dmic2 data pin
+  2: using GPIO4 pin as dmic2 data pin
+
+- realtek,jack-detect-source
+  u32. Valid values:
+  0: jack-detect is not used
+  1: Use GPIO1 for jack-detect
+  2: Use JD1_IN4P for jack-detect
+  3: Use JD2_IN4N for jack-detect
+  4: Use GPIO2 for jack-detect
+  5: Use GPIO3 for jack-detect
+  6: Use GPIO4 for jack-detect
+
+- realtek,jack-detect-not-inverted
+  bool. Normal jack-detect switches give an inverted signal, set this bool
+  in the rare case you've a jack-detect switch which is not inverted.
+
+- realtek,over-current-threshold-microamp
+  u32, micbias over-current detection threshold in µA, valid values are
+  600, 1500 and 2000µA.
+
+- realtek,over-current-scale-factor
+  u32, micbias over-current detection scale-factor, valid values are:
+  0: Scale current by 0.5
+  1: Scale current by 0.75
+  2: Scale current by 1.0
+  3: Scale current by 1.5
+
+Pins on the device (for linking into audio routes) for RT5639/RT5640:
+
+  * DMIC1
+  * DMIC2
+  * MICBIAS1
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * SPOLP
+  * SPOLN
+  * SPORP
+  * SPORN
+
+Additional pins on the device for RT5640:
+
+  * MONOP
+  * MONON
+
+Example:
+
+rt5640 {
+	compatible = "realtek,rt5640";
+	reg = <0x1c>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt
new file mode 100644
index 0000000000..41a62fd2ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5645.txt
@@ -0,0 +1,76 @@
+RT5650/RT5645 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5645" or "realtek,rt5650".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+- avdd-supply: Power supply for AVDD, providing 1.8V.
+
+- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
+
+Optional properties:
+
+- hp-detect-gpios:
+  a GPIO spec for the external headphone detect pin. If jd-mode = 0,
+  we will get the JD status by getting the value of hp-detect-gpios.
+
+- realtek,in2-differential
+  Boolean. Indicate MIC2 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN2P pin as dmic1 data pin
+  2: using GPIO6 pin as dmic1 data pin
+  3: using GPIO10 pin as dmic1 data pin
+  4: using GPIO12 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN2N pin as dmic2 data pin
+  2: using GPIO5 pin as dmic2 data pin
+  3: using GPIO11 pin as dmic2 data pin
+
+-- realtek,jd-mode : The JD mode of rt5645/rt5650
+   0 : rt5645/rt5650 JD function is not used
+   1 : Mode-0 (VDD=3.3V), two port jack detection
+   2 : Mode-1 (VDD=3.3V), one port jack detection
+   3 : Mode-2 (VDD=1.8V), one port jack detection
+
+Pins on the device (for linking into audio routes) for RT5645/RT5650:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * Haptic Generator
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * PDM1L
+  * PDM1R
+  * SPOL
+  * SPOR
+
+Example:
+
+codec: rt5650@1a {
+	compatible = "realtek,rt5650";
+	reg = <0x1a>;
+	hp-detect-gpios = <&gpio 19 0>;
+	interrupt-parent = <&gpio>;
+	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+	realtek,dmic-en = "true";
+	realtek,en-jd-func = "true";
+	realtek,jd-mode = <3>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5651.txt b/Documentation/devicetree/bindings/sound/rt5651.txt
new file mode 100644
index 0000000000..56e736a1cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5651.txt
@@ -0,0 +1,63 @@
+RT5651 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5651".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- realtek,in2-differential
+  Boolean. Indicate MIC2 input are differential, rather than single-ended.
+
+- realtek,dmic-en
+  Boolean. true if dmic is used.
+
+- realtek,jack-detect-source
+  u32. Valid values:
+  1: Use JD1_1 pin for jack-detect
+  2: Use JD1_2 pin for jack-detect
+  3: Use JD2 pin for jack-detect
+
+- realtek,jack-detect-not-inverted
+  bool. Normal jack-detect switches give an inverted (active-low) signal,
+  set this bool in the rare case you've a jack-detect switch which is not
+  inverted.
+
+- realtek,over-current-threshold-microamp
+  u32, micbias over-current detection threshold in µA, valid values are
+  600, 1500 and 2000µA.
+
+- realtek,over-current-scale-factor
+  u32, micbias over-current detection scale-factor, valid values are:
+  0: Scale current by 0.5
+  1: Scale current by 0.75
+  2: Scale current by 1.0
+  3: Scale current by 1.5
+
+Pins on the device (for linking into audio routes) for RT5651:
+
+  * DMIC L1
+  * DMIC R1
+  * IN1P
+  * IN2P
+  * IN2N
+  * IN3P
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * PDML
+  * PDMR
+
+Example:
+
+rt5651: codec@1a {
+	compatible = "realtek,rt5651";
+	reg = <0x1a>;
+	realtek,dmic-en = "true";
+	realtek,in2-diff = "false";
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
new file mode 100644
index 0000000000..8f3f62c022
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5659.txt
@@ -0,0 +1,89 @@
+RT5659/RT5658 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5659" or "realtek,rt5658".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- realtek,in1-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using IN2N pin as dmic1 data pin
+  2: using GPIO5 pin as dmic1 data pin
+  3: using GPIO9 pin as dmic1 data pin
+  4: using GPIO11 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using IN2P pin as dmic2 data pin
+  2: using GPIO6 pin as dmic2 data pin
+  3: using GPIO10 pin as dmic2 data pin
+  4: using GPIO12 pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD3 as JD source
+  2: JD source for Intel HDA header
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+
+- sound-name-prefix: Please refer to dai-common.yaml
+
+- ports: A Codec may have a single or multiple I2S interfaces. These
+  interfaces on Codec side can be described under 'ports' or 'port'.
+  When the SoC or host device is connected to multiple interfaces of
+  the Codec, the connectivity can be described using 'ports' property.
+  If a single interface is used, then 'port' can be used. The usage
+  depends on the platform or board design.
+  Please refer to Documentation/devicetree/bindings/graph.txt
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * SPOL
+  * SPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+  * SPDIF
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5659";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5660.txt b/Documentation/devicetree/bindings/sound/rt5660.txt
new file mode 100644
index 0000000000..30be5f9219
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5660.txt
@@ -0,0 +1,47 @@
+RT5660 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5660".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+- clock-names: Should be "mclk"
+
+- realtek,in1-differential
+- realtek,in3-differential
+  Boolean. Indicate MIC1/3 input are differential, rather than single-ended.
+
+- realtek,poweroff-in-suspend
+  Boolean. If the codec will be powered off in suspend, the resume should be
+  added delay time for waiting codec power ready.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO2 pin as dmic1 data pin
+  2: using IN1P pin as dmic1 data pin
+
+Pins on the device (for linking into audio routes) for RT5660:
+
+  * DMIC L1
+  * DMIC R1
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN3P
+  * IN3N
+  * SPO
+  * LOUTL
+  * LOUTR
+
+Example:
+
+rt5660 {
+	compatible = "realtek,rt5660";
+	reg = <0x1c>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt
new file mode 100644
index 0000000000..24a6dab28f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5663.txt
@@ -0,0 +1,60 @@
+RT5663 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5663".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+- avdd-supply: Power supply for AVDD, providing 1.8V.
+
+- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
+
+Optional properties:
+
+- "realtek,dc_offset_l_manual"
+- "realtek,dc_offset_r_manual"
+- "realtek,dc_offset_l_manual_mic"
+- "realtek,dc_offset_r_manual_mic"
+  Based on the different PCB layout, add the manual offset value to
+  compensate the DC offset for each L and R channel, and they are different
+  between headphone and headset.
+- "realtek,impedance_sensing_num"
+  The matrix row number of the impedance sensing table.
+  If the value is 0, it means the impedance sensing is not supported.
+- "realtek,impedance_sensing_table"
+  The matrix rows of the impedance sensing table are consisted by impedance
+  minimum, impedance maximum, volume, DC offset w/o and w/ mic of each L and
+  R channel accordingly. Example is shown as following.
+  <   0    300  7  0xffd160  0xffd1c0  0xff8a10  0xff8ab0
+    301  65535  4  0xffe470  0xffe470  0xffb8e0  0xffb8e0>
+  The first and second column are defined for the impedance range. If the
+  detected impedance value is in the range, then the volume value of the
+  third column will be set to codec. In our codec design, each volume value
+  should compensate different DC offset to avoid the pop sound, and it is
+  also different between headphone and headset. In the example, the
+  "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of
+  impedance in the impedance sensing function.
+
+Pins on the device (for linking into audio routes) for RT5663:
+
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * HPOL
+  * HPOR
+
+Example:
+
+rt5663: codec@12 {
+	compatible = "realtek,rt5663";
+	reg = <0x12>;
+	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+	avdd-supply = <&pp1800_a_alc5662>;
+	cpvdd-supply = <&pp3500_a_alc5662>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt
new file mode 100644
index 0000000000..f6ca96b4ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@@ -0,0 +1,68 @@
+RT5665/RT5666 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5665", "realtek,rt5666".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO4 pin as dmic1 data pin
+  2: using IN2N pin as dmic2 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using GPIO5 pin as dmic2 data pin
+  2: using IN2P pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5665";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5668.txt b/Documentation/devicetree/bindings/sound/rt5668.txt
new file mode 100644
index 0000000000..a2b7e9a2f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5668.txt
@@ -0,0 +1,50 @@
+RT5668B audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5668b"
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- interrupts : The CODEC's interrupt output.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO2 pin as dmic1 data pin
+  2: using GPIO5 pin as dmic1 data pin
+
+- realtek,dmic1-clk-pin
+  0: using GPIO1 pin as dmic1 clock pin
+  1: using GPIO3 pin as dmic1 clock pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5668B:
+
+  * DMIC L1
+  * DMIC R1
+  * IN1P
+  * HPOL
+  * HPOR
+
+Example:
+
+rt5668 {
+	compatible = "realtek,rt5668b";
+	reg = <0x1a>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	realtek,dmic1-data-pin = <1>;
+	realtek,dmic1-clk-pin = <1>;
+	realtek,jd-src = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
new file mode 100644
index 0000000000..da24300991
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -0,0 +1,78 @@
+RT5677 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5677".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+- gpio-controller : Indicates this device is a GPIO controller.
+
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+
+Optional properties:
+
+- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,lout1-differential
+- realtek,lout2-differential
+- realtek,lout3-differential
+  Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
+  rather than single-ended.
+
+- realtek,gpio-config
+  Array of six 8bit elements that configures GPIO.
+    0 - floating (reset value)
+    1 - pull down
+    2 - pull up
+
+- realtek,jd1-gpio
+  Configures GPIO Mic Jack detection 1.
+  Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
+
+- realtek,jd2-gpio
+- realtek,jd3-gpio
+  Configures GPIO Mic Jack detection 2 and 3.
+  Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively.
+
+Pins on the device (for linking into audio routes):
+
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * MICBIAS1
+  * DMIC1
+  * DMIC2
+  * DMIC3
+  * DMIC4
+  * LOUT1
+  * LOUT2
+  * LOUT3
+
+Example:
+
+rt5677 {
+	compatible = "realtek,rt5677";
+	reg = <0x2c>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	realtek,pow-ldo2-gpio =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+	realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+	realtek,in1-differential = "true";
+	realtek,gpio-config = /bits/ 8  <0 0 0 0 0 2>;   /* pull up GPIO6 */
+	realtek,jd2-gpio = <3>;  /* Enables Jack detection for GPIO6 */
+};
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
new file mode 100644
index 0000000000..5e1d08de18
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -0,0 +1,98 @@
+RT5682 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5682" or "realtek,rt5682i"
+
+- reg : The I2C address of the device.
+
+- AVDD-supply: phandle to the regulator supplying analog power through the
+  AVDD pin
+
+- MICVDD-supply: phandle to the regulator supplying power for the microphone
+  bias through the MICVDD pin. Either MICVDD or VBAT should be present.
+
+- VBAT-supply: phandle to the regulator supplying battery power through the
+  VBAT pin. Either MICVDD or VBAT should be present.
+
+- DBVDD-supply: phandle to the regulator supplying I/O power through the DBVDD
+  pin.
+
+- LDO1-IN-supply: phandle to the regulator supplying power to the digital core
+  and charge pump through the LDO1_IN pin.
+
+Optional properties:
+
+- interrupts : The CODEC's interrupt output.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO2 pin as dmic1 data pin
+  2: using GPIO5 pin as dmic1 data pin
+
+- realtek,dmic1-clk-pin
+  0: using GPIO1 pin as dmic1 clock pin
+  1: using GPIO3 pin as dmic1 clock pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+- realtek,btndet-delay
+  The debounce delay for push button.
+  The delay time is realtek,btndet-delay value multiple of 8.192 ms.
+  If absent, the default is 16.
+
+- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
+- clock-output-names : Name given for DAI clocks output.
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
+
+- #sound-dai-cells: Should be set to '<1>'.
+
+Pins on the device (for linking into audio routes) for RT5682:
+
+  * DMIC L1
+  * DMIC R1
+  * IN1P
+  * HPOL
+  * HPOR
+
+Example:
+
+rt5682 {
+	compatible = "realtek,rt5682i";
+	reg = <0x1a>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	realtek,dmic1-data-pin = <1>;
+	realtek,dmic1-clk-pin = <1>;
+	realtek,jd-src = <1>;
+	realtek,btndet-delay = <16>;
+
+	#clock-cells = <1>;
+	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+	clocks = <&osc>;
+	clock-names = "mclk";
+
+	AVDD-supply = <&avdd_reg>;
+	MICVDD-supply = <&micvdd_reg>;
+	DBVDD-supply = <&dbvdd_reg>;
+	LDO1-IN-supply = <&ldo1_in_reg>;
+};
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
new file mode 100644
index 0000000000..5ea0819a26
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,aries-wm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Aries audio complex with WM8994 codec
+
+maintainers:
+  - Jonathan Bakker <xc-racer2@live.ca>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      # With FM radio and modem master
+      - samsung,aries-wm8994
+      # Without FM radio and modem slave
+      - samsung,fascinate4g-wm8994
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        minItems: 2
+        maxItems: 2
+        description: |
+          phandles to the I2S controller and bluetooth codec,
+          in that order
+    required:
+      - sound-dai
+
+  codec:
+    additionalProperties: false
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle to the WM8994 CODEC
+    required:
+      - sound-dai
+
+  samsung,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    deprecated: true
+    description: |
+      List of the connections between audio
+      components;  each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source;
+      valid names for sources and sinks are the WM8994's pins (as
+      documented in its binding), and the jacks on the board -
+      For samsung,aries-wm8994: HP, SPK, RCV, LINE, Main Mic, Headset Mic,
+      or FM In
+      For samsung,fascinate4g-wm8994: HP, SPK, RCV, LINE, Main Mic,
+      or HeadsetMic
+      Deprecated, use audio-routing.
+
+  extcon:
+    description: Extcon phandle for dock detection
+
+  main-micbias-supply:
+    description: Supply for the micbias on the main mic
+
+  headset-micbias-supply:
+    description: Supply for the micbias on the headset mic
+
+  earpath-sel-gpios:
+    maxItems: 1
+    description: GPIO for switching between tv-out and mic paths
+
+  headset-detect-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset insertion
+
+  headset-key-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset key press
+
+  io-channels:
+    maxItems: 1
+    description: IO channel to read micbias voltage for headset detection
+
+  io-channel-names:
+    const: headset-detect
+
+required:
+  - compatible
+  - cpu
+  - codec
+  - audio-routing
+  - extcon
+  - main-micbias-supply
+  - headset-micbias-supply
+  - earpath-sel-gpios
+  - headset-detect-gpios
+  - headset-key-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,fascinate4g-wm8994";
+
+        model = "Fascinate4G";
+
+        extcon = <&fsa9480>;
+
+        main-micbias-supply = <&main_micbias_reg>;
+        headset-micbias-supply = <&headset_micbias_reg>;
+
+        earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+        io-channels = <&adc 3>;
+        io-channel-names = "headset-detect";
+        headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_HIGH>;
+        headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+        audio-routing =
+            "HP", "HPOUT1L",
+            "HP", "HPOUT1R",
+
+            "SPK", "SPKOUTLN",
+            "SPK", "SPKOUTLP",
+
+            "RCV", "HPOUT2N",
+            "RCV", "HPOUT2P",
+
+            "LINE", "LINEOUT2N",
+            "LINE", "LINEOUT2P",
+
+            "IN1LP", "Main Mic",
+            "IN1LN", "Main Mic",
+
+            "IN1RP", "Headset Mic",
+            "IN1RN", "Headset Mic";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&headset_det &earpath_sel>;
+
+        cpu {
+            sound-dai = <&i2s0>, <&bt_codec>;
+        };
+
+        codec {
+            sound-dai = <&wm8994>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,arndale.yaml b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml
new file mode 100644
index 0000000000..9bc4585bb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,arndale.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Insignal Arndale boards audio complex
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,arndale-alc5631
+      - samsung,arndale-rt5631
+      - samsung,arndale-wm1811
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,audio-cpu:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - samsung,audio-codec
+  - samsung,audio-cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "samsung,arndale-rt5631";
+        samsung,audio-cpu = <&i2s0>;
+        samsung,audio-codec = <&rt5631>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
new file mode 100644
index 0000000000..6ec80f529d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,midas-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Midas audio complex with WM1811 codec
+
+maintainers:
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,midas-audio
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle to the I2S controller
+    required:
+      - sound-dai
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+        description: phandle to the WM1811 CODEC
+    required:
+      - sound-dai
+
+  samsung,audio-routing:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      List of the connections between audio components; each entry is
+      a pair of strings, the first being the connection's sink, the second
+      being the connection's source; valid names for sources and sinks are
+      the WM1811's pins (as documented in its binding), and the jacks
+      on the board: HP, SPK, Main Mic, Sub Mic, Headset Mic.
+      Deprecated, use audio-routing.
+
+  mic-bias-supply:
+    description: Supply for the micbias on the Main microphone
+
+  submic-bias-supply:
+    description: Supply for the micbias on the Sub microphone
+
+  fm-sel-gpios:
+    maxItems: 1
+    description: GPIO pin for FM selection
+
+  lineout-sel-gpios:
+    maxItems: 1
+    description: GPIO pin for line out selection
+
+required:
+  - compatible
+  - cpu
+  - codec
+  - audio-routing
+  - mic-bias-supply
+  - submic-bias-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,midas-audio";
+        model = "Midas";
+
+        fm-sel-gpios = <&gpaa0 3 GPIO_ACTIVE_HIGH>;
+
+        mic-bias-supply = <&mic_bias_reg>;
+        submic-bias-supply = <&submic_bias_reg>;
+
+        audio-routing =
+                "HP", "HPOUT1L",
+                "HP", "HPOUT1R",
+
+                "SPK", "SPKOUTLN",
+                "SPK", "SPKOUTLP",
+                "SPK", "SPKOUTRN",
+                "SPK", "SPKOUTRP",
+
+                "RCV", "HPOUT2N",
+                "RCV", "HPOUT2P",
+
+                "IN1LP", "Main Mic",
+                "IN1LN", "Main Mic",
+                "IN1RP", "Sub Mic",
+                "IN1LP", "Sub Mic";
+
+        cpu {
+            sound-dai = <&i2s0>;
+        };
+
+        codec {
+            sound-dai = <&wm1811>;
+        };
+
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
new file mode 100644
index 0000000000..b77284e3e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,odroid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Odroid XU3/XU4 audio complex with MAX98090 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: hardkernel,odroid-xu3-audio
+
+      - const: hardkernel,odroid-xu4-audio
+        deprecated: true
+
+      - const: samsung,odroid-xu3-audio
+        deprecated: true
+
+      - const: samsung,odroid-xu4-audio
+        deprecated: true
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+  clocks: true
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: phandles to the I2S controllers
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        minItems: 1
+        items:
+          - description: phandle of the HDMI IP block node
+          - description: phandle of the MAX98090 CODEC
+
+  samsung,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    deprecated: true
+    description: |
+      List of the connections between audio
+      components;  each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source;
+      valid names for sources and sinks are the MAX98090's pins (as
+      documented in its binding), and the jacks on the board.
+      For Odroid X2: "Headphone Jack", "Mic Jack", "DMIC"
+      For Odroid U3, XU3: "Headphone Jack", "Speakers"
+      For Odroid XU4: no entries
+      Deprecated, use audio-routing.
+
+  samsung,audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      This property specifies off-codec audio elements
+      like headphones or speakers, for details see widgets.txt
+
+required:
+  - compatible
+  - cpu
+  - codec
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "hardkernel,odroid-xu3-audio";
+        model = "Odroid-XU3";
+        audio-routing =
+                "Headphone Jack", "HPL",
+                "Headphone Jack", "HPR",
+                "IN1", "Mic Jack",
+                "Mic Jack", "MICBIAS";
+
+        cpu {
+            sound-dai = <&i2s0 0>;
+        };
+
+        codec {
+            sound-dai = <&hdmi>, <&max98090>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml
new file mode 100644
index 0000000000..ac151d3c1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,smdk5250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SMDK5250 audio complex with WM8994 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,smdk-wm8994
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,i2s-controller:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - samsung,audio-codec
+  - samsung,i2s-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "samsung,smdk-wm8994";
+        samsung,i2s-controller = <&i2s0>;
+        samsung,audio-codec = <&wm8994>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,snow.yaml b/Documentation/devicetree/bindings/sound/samsung,snow.yaml
new file mode 100644
index 0000000000..3d49aa4c9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,snow.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,snow.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Snow audio complex with MAX9809x codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - google,snow-audio-max98090
+      - google,snow-audio-max98091
+      - google,snow-audio-max98095
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: List of phandles to the CODEC and HDMI IP nodes.
+        items:
+          - description: Phandle to the MAX98090, MAX98091 or MAX98095 CODEC.
+          - description: Phandle to the HDMI IP block node.
+    required:
+      - sound-dai
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: Phandle to the Samsung I2S controller.
+        maxItems: 1
+    required:
+      - sound-dai
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  samsung,i2s-controller:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  samsung,model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - codec
+  - cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "google,snow-audio-max98095";
+        samsung,model = "Snow-I2S-MAX98095";
+
+        cpu {
+            sound-dai = <&i2s0 0>;
+        };
+
+        codec {
+            sound-dai = <&max98095 0>, <&hdmi>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
new file mode 100644
index 0000000000..7605925991
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,tm2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+allOf:
+  - $ref: sound-card-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,tm2-audio
+
+  audio-amplifier:
+    description: Phandle to the MAX98504 amplifier.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  audio-codec:
+    description: Phandles to the codecs.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to the WM5110 audio codec.
+      - description: Phandle to the HDMI transmitter node.
+
+  samsung,audio-routing:
+    description: |
+      List of the connections between audio components; each entry is
+      a pair of strings, the first being the connection's sink, the second
+      being the connection's source; valid names for sources and sinks are the
+      WM5110's and MAX98504's pins and the jacks on the board: HP, SPK, Main
+      Mic, Sub Mic, Third Mic, Headset Mic.
+      Deprecated, use audio-routing.
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  i2s-controller:
+    description: Phandles to the I2S controllers.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to I2S0.
+      - description: Phandle to I2S1.
+
+  mic-bias-gpios:
+    description: GPIO pin that enables the Main Mic bias regulator.
+
+required:
+  - compatible
+  - audio-amplifier
+  - audio-codec
+  - audio-routing
+  - i2s-controller
+  - mic-bias-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,tm2-audio";
+        audio-codec = <&wm5110>, <&hdmi>;
+        i2s-controller = <&i2s0 0>, <&i2s1 0>;
+        audio-amplifier = <&max98504>;
+        mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+        model = "wm5110";
+        audio-routing = "HP", "HPOUT1L",
+                                "HP", "HPOUT1R",
+                                "SPK", "SPKOUT",
+                                "SPKOUT", "HPOUT2L",
+                                "SPKOUT", "HPOUT2R",
+                                "RCV", "HPOUT3L",
+                                "RCV", "HPOUT3R";
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
new file mode 100644
index 0000000000..30b3b6e982
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC I2S controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    description: |
+      samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.
+
+      samsung,s5pv210-i2s: for 8/16/24bit multichannel (5.1) I2S with
+      secondary FIFO, s/w reset control and internal mux for root clock
+      source.
+
+      samsung,exynos5420-i2s: for 8/16/24bit multichannel (5.1) I2S for
+      playback, stereo channel capture, secondary FIFO using internal
+      or external DMA, s/w reset control, internal mux for root clock
+      source and 7.1 channel TDM support for playback; TDM (Time division
+      multiplexing) is to allow transfer of multiple channel audio data on
+      single data line.
+
+      samsung,exynos7-i2s: with all the available features of Exynos5 I2S.
+      Exynos7 I2S has 7.1 channel TDM support for capture, secondary FIFO
+      with only external DMA and more number of root clock sampling
+      frequencies.
+
+      samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports
+      stereo channels. Exynos7 I2S1 upgraded to 5.1 multichannel with
+      slightly modified bit offsets.
+
+      tesla,fsd-i2s: for 8/16/24bit stereo channel I2S for playback and
+      capture, secondary FIFO using external DMA, s/w reset control,
+      internal mux for root clock source with all root clock sampling
+      frequencies supported by Exynos7 I2S and 7.1 channel TDM support
+      for playback and capture TDM (Time division multiplexing) to allow
+      transfer of multiple channel audio data on single data line.
+    enum:
+      - samsung,s3c6410-i2s
+      - samsung,s5pv210-i2s
+      - samsung,exynos5420-i2s
+      - samsung,exynos7-i2s
+      - samsung,exynos7-i2s1
+      - tesla,fsd-i2s
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 3
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: tx
+          - const: rx
+          - const: tx-sec
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: iis
+      - items: # for I2S0
+          - const: iis
+          - const: i2s_opclk0
+          - const: i2s_opclk1
+      - items: # for I2S1 and I2S2
+          - const: iis
+          - const: i2s_opclk0
+    description: |
+      "iis" is the I2S bus clock and i2s_opclk0, i2s_opclk1 are sources
+      of the root clock. I2S0 has internal mux to select the source
+      of root clock and I2S1 and I2S2 doesn't have any such mux.
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    deprecated: true
+    oneOf:
+      - items: # for I2S0
+          - const: i2s_cdclk0
+      - items: # for I2S1
+          - const: i2s_cdclk1
+      - items: # for I2S2
+          - const: i2s_cdclk2
+    description: Names of the CDCLK I2S output clocks.
+
+  interrupts:
+    maxItems: 1
+
+  samsung,idma-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal DMA register base address of the audio
+      subsystem (used in secondary sound source).
+
+  power-domains:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos-audss-clk.h>
+
+    i2s0: i2s@3830000 {
+        compatible = "samsung,s5pv210-i2s";
+        reg = <0x03830000 0x100>;
+        dmas = <&pdma0 10>,
+                <&pdma0 9>,
+                <&pdma0 8>;
+        dma-names = "tx", "rx", "tx-sec";
+        clocks = <&clock_audss EXYNOS_I2S_BUS>,
+                <&clock_audss EXYNOS_I2S_BUS>,
+                <&clock_audss EXYNOS_SCLK_I2S>;
+        clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+        #clock-cells = <1>;
+        samsung,idma-addr = <0x03000000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2s0_bus>;
+        #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml
new file mode 100644
index 0000000000..f6a807329a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/serial-midi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Serial MIDI Interface
+
+maintainers:
+  - Daniel Kaehn <kaehndan@gmail.com>
+
+description:
+  Generic MIDI interface using a serial device. This denotes that a serial device is
+  dedicated to MIDI communication, either to an external MIDI device through a DIN5
+  or other connector, or to a known hardwired MIDI controller. This device must be a
+  child node of a serial node.
+
+  Can only be set to use standard baud rates corresponding to supported rates of the
+  parent serial device. If the standard MIDI baud of 31.25 kBaud is needed
+  (as would be the case if interfacing with arbitrary external MIDI devices),
+  configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud
+  results in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default)
+
+properties:
+  compatible:
+    const: serial-midi
+
+  current-speed:
+    description: Baudrate to set the serial port to when this MIDI device is opened.
+    default: 38400
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+        };
+    };
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+            current-speed = <115200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
new file mode 100644
index 0000000000..1353c05148
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SGTL5000 Stereo Codec
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: fsl,sgtl5000
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+  clocks:
+    items:
+      - description: the clock provider of SYS_MCLK
+
+  VDDA-supply:
+    description: the regulator provider of VDDA
+
+  VDDIO-supply:
+    description: the regulator provider of VDDIO
+
+  VDDD-supply:
+    description: the regulator provider of VDDD
+
+  micbias-resistor-k-ohms:
+    description: The bias resistor to be used in kOhms. The resistor can take
+      values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not
+      mentioned or if the value is unknown, then micbias resistor is set to
+      4k.
+    enum: [ 0, 2, 4, 8 ]
+
+  micbias-voltage-m-volts:
+    description: The bias voltage to be used in mVolts. The voltage can take
+      values from 1.25V to 3V by 250mV steps. If this node is not mentioned
+      or the value is unknown, then the value is set to 1.25V.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ]
+
+  lrclk-strength:
+    description: |
+      The LRCLK pad strength. Possible values are: 0, 1, 2 and 3 as per the
+      table below:
+
+        VDDIO		1.8V		2.5V		3.3V
+        0 =		Disable
+        1 =		1.66 mA		2.87 mA		4.02  mA
+        2 =		3.33 mA		5.74 mA		8.03  mA
+        3 =		4.99 mA		8.61 mA		12.05 mA
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  sclk-strength:
+    description: |
+      The SCLK pad strength. Possible values are: 0, 1, 2 and 3 as per the
+      table below:
+
+        VDDIO		1.8V		2.5V		3.3V
+        0 =		Disable
+        1 =		1.66 mA		2.87 mA		4.02  mA
+        2 =		3.33 mA		5.74 mA		8.03  mA
+        3 =		4.99 mA		8.61 mA		12.05 mA
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - clocks
+  - VDDA-supply
+  - VDDIO-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@a {
+            compatible = "fsl,sgtl5000";
+            reg = <0x0a>;
+            #sound-dai-cells = <0>;
+            clocks = <&clks 150>;
+            micbias-resistor-k-ohms = <2>;
+            micbias-voltage-m-volts = <2250>;
+            VDDA-supply = <&reg_3p3v>;
+            VDDIO-supply = <&reg_3p3v>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
new file mode 100644
index 0000000000..5db1f989d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-audio-amplifier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Amplifier
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - dioo,dio2125
+      - simple-audio-amplifier
+
+  enable-gpios:
+    maxItems: 1
+
+  VCC-supply:
+    description: >
+      power supply for the device
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/meson8-gpio.h>
+
+    analog-amplifier {
+        compatible = "simple-audio-amplifier";
+        VCC-supply = <&regulator>;
+        enable-gpios = <&gpio GPIOH_3 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
new file mode 100644
index 0000000000..9f319caf3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-audio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Multiplexer
+
+maintainers:
+  - Alexandre Belloni <aleandre.belloni@bootlin.com>
+
+description: |
+  Simple audio multiplexers are driven using gpios, allowing to select which of
+  their input line is connected to the output line.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: simple-audio-mux
+
+  mux-gpios:
+    description: |
+      GPIOs used to select the input line.
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - mux-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    mux {
+        compatible = "simple-audio-mux";
+        mux-gpios = <&gpio 3 0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
new file mode 100644
index 0000000000..59ac2d1d1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -0,0 +1,559 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Card Driver
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+definitions:
+
+  frame-master:
+    description: Indicates dai-link frame master.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  bitclock-master:
+    description: Indicates dai-link bit clock master
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  frame-inversion:
+    description: dai-link uses frame clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  bitclock-inversion:
+    description: dai-link uses bit clock inversion
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  dai-tdm-slot-num:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dai-tdm-slot-width:
+    description: see tdm-slot.txt.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-frequency:
+    description: |
+      If a clock is specified and a multiplication factor is given with
+      mclk-fs, the clock will be set to the calculated mclk frequency
+      when the stream starts.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  system-clock-direction-out:
+    description: |
+      specifies clock direction as 'out' on initialization.
+      It is useful for some aCPUs with fixed clocks.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  system-clock-fixed:
+    description: |
+      Specifies that the clock frequency should not be modified.
+      Implied when system-clock-frequency is specified, but can be used when
+      a clock is mapped to the device whose frequency cannot or should not be
+      changed. When mclk-fs is also specified, this restricts the device to a
+      single fixed sampling rate.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  mclk-fs:
+    description: |
+      Multiplication factor between stream rate and codec mclk.
+      When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  aux-devs:
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  prefix:
+    description: device name prefix
+    $ref: /schemas/types.yaml#/definitions/string
+
+  label:
+    maxItems: 1
+
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  pin-switches:
+    description: the widget names for which pin switches must be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  format:
+    description: audio format.
+    items:
+      enum:
+        - i2s
+        - right_j
+        - left_j
+        - dsp_a
+        - dsp_b
+        - ac97
+        - pdm
+        - msb
+        - lsb
+
+  dai:
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+
+      # common properties
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      prefix:
+        $ref: "#/definitions/prefix"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      frame-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-master:
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      dai-tdm-slot-num:
+        $ref: "#/definitions/dai-tdm-slot-num"
+      dai-tdm-slot-width:
+        $ref: "#/definitions/dai-tdm-slot-width"
+      clocks:
+        maxItems: 1
+      system-clock-frequency:
+        $ref: "#/definitions/system-clock-frequency"
+      system-clock-direction-out:
+        $ref: "#/definitions/system-clock-direction-out"
+      system-clock-fixed:
+        $ref: "#/definitions/system-clock-fixed"
+    required:
+      - sound-dai
+
+  additional-devs:
+    type: object
+    description:
+      Additional devices used by the simple audio card.
+    patternProperties:
+      '^iio-aux(-.+)?$':
+        type: object
+        $ref: audio-iio-aux.yaml#
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - simple-audio-card
+        - simple-scu-audio-card
+
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 0
+
+  label:
+    $ref: "#/definitions/label"
+
+  simple-audio-card,name:
+    description: User specified audio sound card name.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  simple-audio-card,widgets:
+    $ref: "#/definitions/widgets"
+  simple-audio-card,routing:
+    $ref: "#/definitions/routing"
+
+  # common properties
+  simple-audio-card,frame-master:
+    $ref: "#/definitions/frame-master"
+  simple-audio-card,bitclock-master:
+    $ref: "#/definitions/bitclock-master"
+  simple-audio-card,frame-inversion:
+    $ref: "#/definitions/frame-inversion"
+  simple-audio-card,bitclock-inversion:
+    $ref: "#/definitions/bitclock-inversion"
+  simple-audio-card,format:
+    $ref: "#/definitions/format"
+  simple-audio-card,mclk-fs:
+    $ref: "#/definitions/mclk-fs"
+  simple-audio-card,aux-devs:
+    $ref: "#/definitions/aux-devs"
+  simple-audio-card,additional-devs:
+    $ref: "#/definitions/additional-devs"
+  simple-audio-card,convert-rate:
+    $ref: "#/definitions/convert-rate"
+  simple-audio-card,convert-channels:
+    $ref: "#/definitions/convert-channels"
+  simple-audio-card,prefix:
+    $ref: "#/definitions/prefix"
+  simple-audio-card,pin-switches:
+    $ref: "#/definitions/pin-switches"
+  simple-audio-card,hp-det-gpio:
+    maxItems: 1
+  simple-audio-card,mic-det-gpio:
+    maxItems: 1
+
+patternProperties:
+  "^simple-audio-card,cpu(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+  "^simple-audio-card,codec(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+  "^simple-audio-card,plat(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+
+  "^simple-audio-card,dai-link(@[0-9a-f]+)?$":
+    description: |
+      Container for dai-link level properties and the CPU and CODEC sub-nodes.
+      This container may be omitted when the card has only one DAI link.
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+      # common properties
+      frame-master:
+        $ref: "#/definitions/frame-master"
+      bitclock-master:
+        $ref: "#/definitions/bitclock-master"
+      frame-inversion:
+        $ref: "#/definitions/frame-inversion"
+      bitclock-inversion:
+        $ref: "#/definitions/bitclock-inversion"
+      format:
+        $ref: "#/definitions/format"
+      mclk-fs:
+        $ref: "#/definitions/mclk-fs"
+      aux-devs:
+        $ref: "#/definitions/aux-devs"
+      convert-rate:
+        $ref: "#/definitions/convert-rate"
+      convert-channels:
+        $ref: "#/definitions/convert-channels"
+      prefix:
+        $ref: "#/definitions/prefix"
+      pin-switches:
+        $ref: "#/definitions/pin-switches"
+      hp-det-gpio:
+        maxItems: 1
+      mic-det-gpio:
+        maxItems: 1
+
+    patternProperties:
+      "^cpu(-[0-9]+)?$":
+        $ref: "#/definitions/dai"
+      "^codec(-[0-9]+)?$":
+        $ref: "#/definitions/dai"
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+# --------------------
+# single DAI link
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "VF610-Tower-Sound-Card";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dailink0_master>;
+        simple-audio-card,frame-master = <&dailink0_master>;
+        simple-audio-card,widgets =
+                "Microphone", "Microphone Jack",
+                "Headphone", "Headphone Jack",
+                "Speaker", "External Speaker";
+        simple-audio-card,routing =
+                "MIC_IN", "Microphone Jack",
+                "Headphone Jack", "HP_OUT",
+                "External Speaker", "LINE_OUT";
+
+        simple-audio-card,cpu {
+            sound-dai = <&sh_fsi2 0>;
+        };
+
+        dailink0_master: simple-audio-card,codec {
+            sound-dai = <&ak4648>;
+            clocks = <&osc>;
+        };
+    };
+
+# --------------------
+# Multi DAI links
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        simple-audio-card,name = "Cubox Audio";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,dai-link@0 {		/* I2S - HDMI */
+            reg = <0>;
+            format = "i2s";
+            cpu {
+                sound-dai = <&audio0>;
+            };
+            codec {
+                sound-dai = <&tda998x0>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {		/* S/PDIF - HDMI */
+            reg = <1>;
+            cpu {
+                sound-dai = <&audio1>;
+            };
+            codec {
+                sound-dai = <&tda998x1>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {		/* S/PDIF - S/PDIF */
+            reg = <2>;
+            cpu {
+                sound-dai = <&audio2>;
+            };
+            codec {
+                sound-dai = <&spdif_codec>;
+            };
+        };
+    };
+
+# --------------------
+# route audio from IMX6 SSI2 through TLV320DAC3100 codec
+# through TPA6130A2 amplifier to headphones:
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,widgets =
+            "Headphone", "Headphone Jack";
+        simple-audio-card,routing =
+            "Headphone Jack", "HPLEFT",
+            "Headphone Jack", "HPRIGHT",
+            "LEFTIN", "HPL",
+            "RIGHTIN", "HPR";
+        simple-audio-card,aux-devs = <&amp>;
+        simple-audio-card,cpu {
+            sound-dai = <&ssi2>;
+        };
+        simple-audio-card,codec {
+            sound-dai = <&codec>;
+            clocks = <&clocks>;
+        };
+    };
+
+# --------------------
+# route audio to/from a codec through an amplifier
+# designed with a potentiometer driven by IIO:
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,aux-devs = <&amp_in>, <&amp_out>;
+        simple-audio-card,routing =
+            "CODEC LEFTIN", "AMP_IN LEFT OUT",
+            "CODEC RIGHTIN", "AMP_IN RIGHT OUT",
+            "AMP_OUT LEFT IN", "CODEC LEFTOUT",
+            "AMP_OUT RIGHT IN", "CODEC RIGHTOUT";
+
+        simple-audio-card,additional-devs {
+            amp_out: iio-aux-out {
+                compatible = "audio-iio-aux";
+                io-channels = <&pot_out 0>, <&pot_out 1>;
+                io-channel-names = "LEFT", "RIGHT";
+                snd-control-invert-range = <1 1>;
+                sound-name-prefix = "AMP_OUT";
+            };
+
+            amp_in: iio_aux-in {
+                compatible = "audio-iio-aux";
+                io-channels = <&pot_in 0>, <&pot_in 1>;
+                io-channel-names = "LEFT", "RIGHT";
+                sound-name-prefix = "AMP_IN";
+            };
+        };
+
+        simple-audio-card,cpu {
+            sound-dai = <&cpu>;
+        };
+
+        simple-audio-card,codec {
+            sound-dai = <&codec>;
+            clocks = <&clocks>;
+        };
+    };
+
+# --------------------
+# Sampling Rate Conversion
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&sndcodec>;
+        simple-audio-card,frame-master = <&sndcodec>;
+
+        simple-audio-card,convert-rate = <48000>;
+
+        simple-audio-card,prefix = "ak4642";
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "DAI0 Capture", "ak4642 Capture";
+
+        sndcpu: simple-audio-card,cpu {
+            sound-dai = <&rcar_sound>;
+        };
+
+        sndcodec: simple-audio-card,codec {
+            sound-dai = <&ak4643>;
+            system-clock-frequency = <11289600>;
+        };
+    };
+
+# --------------------
+# 2 CPU 1 Codec (Mixing)
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,name = "rsnd-ak4643";
+        simple-audio-card,format = "left_j";
+        simple-audio-card,bitclock-master = <&dpcmcpu>;
+        simple-audio-card,frame-master = <&dpcmcpu>;
+
+        simple-audio-card,convert-rate = <48000>;
+        simple-audio-card,convert-channels = <2>;
+
+        simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+                                    "ak4642 Playback", "DAI1 Playback";
+
+        dpcmcpu: simple-audio-card,cpu@0 {
+            reg = <0>;
+            sound-dai = <&rcar_sound 0>;
+        };
+
+        simple-audio-card,cpu@1 {
+            reg = <1>;
+            sound-dai = <&rcar_sound 1>;
+        };
+
+        simple-audio-card,codec {
+            prefix = "ak4642";
+            sound-dai = <&ak4643>;
+            clocks = <&audio_clock>;
+        };
+    };
+
+# --------------------
+# Multi DAI links with DPCM:
+#
+# CPU0 ------ ak4613
+# CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
+# CPU2 --/                /* DPCM 3ch/4ch */
+# CPU3 --/                /* DPCM 5ch/6ch */
+# CPU4 --/                /* DPCM 7ch/8ch */
+# CPU5 ------ PCM3168A-c
+# --------------------
+  - |
+    sound {
+        compatible = "simple-audio-card";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        simple-audio-card,routing =
+            "pcm3168a Playback", "DAI1 Playback",
+            "pcm3168a Playback", "DAI2 Playback",
+            "pcm3168a Playback", "DAI3 Playback",
+            "pcm3168a Playback", "DAI4 Playback";
+
+        simple-audio-card,dai-link@0 {
+            reg = <0>;
+            format = "left_j";
+            bitclock-master = <&sndcpu0>;
+            frame-master = <&sndcpu0>;
+
+            sndcpu0: cpu {
+                sound-dai = <&rcar_sound 0>;
+            };
+            codec {
+                sound-dai = <&ak4613>;
+            };
+        };
+
+        simple-audio-card,dai-link@1 {
+            reg = <1>;
+            format = "i2s";
+            bitclock-master = <&sndcpu1>;
+            frame-master = <&sndcpu1>;
+
+            convert-channels = <8>; /* TDM Split */
+
+            sndcpu1: cpu-0 {
+                sound-dai = <&rcar_sound 1>;
+            };
+            cpu-1 {
+                sound-dai = <&rcar_sound 2>;
+            };
+            cpu-2 {
+                sound-dai = <&rcar_sound 3>;
+            };
+            cpu-3 {
+                sound-dai = <&rcar_sound 4>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                dai-tdm-slot-num = <8>;
+                sound-dai = <&pcm3168a 0>;
+            };
+        };
+
+        simple-audio-card,dai-link@2 {
+            reg = <2>;
+            format = "i2s";
+            bitclock-master = <&sndcpu2>;
+            frame-master = <&sndcpu2>;
+
+            sndcpu2: cpu {
+                sound-dai = <&rcar_sound 5>;
+            };
+            codec {
+                mclk-fs = <512>;
+                prefix = "pcm3168a";
+                sound-dai = <&pcm3168a 1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/sirf-audio-port.txt b/Documentation/devicetree/bindings/sound/sirf-audio-port.txt
new file mode 100644
index 0000000000..1f66de3c8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sirf-audio-port.txt
@@ -0,0 +1,20 @@
+* SiRF SoC audio port
+
+Required properties:
+- compatible: "sirf,audio-port"
+- reg: Base address and size entries:
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+Example:
+
+audioport: audioport@b0040000 {
+	compatible = "sirf,audio-port";
+	reg = <0xb0040000 0x10000>;
+	dmas = <&dmac1 3>, <&dmac1 8>;
+	dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/sound/sirf-audio.txt b/Documentation/devicetree/bindings/sound/sirf-audio.txt
new file mode 100644
index 0000000000..c88882ca37
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sirf-audio.txt
@@ -0,0 +1,41 @@
+* SiRF atlas6 and prima2 internal audio codec and port based audio setups
+
+Required properties:
+- compatible: "sirf,sirf-audio-card"
+- sirf,audio-platform: phandle for the platform node
+- sirf,audio-codec: phandle for the SiRF internal codec node
+
+Optional properties:
+- hp-pa-gpios: Need to be present if the board need control external
+  headphone amplifier.
+- spk-pa-gpios: Need to be present if the board need control external
+  speaker amplifier.
+- hp-switch-gpios: Need to be present if the board capable to detect jack
+  insertion, removal.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Ext Spk
+ * Line In
+ * Mic
+
+SiRF internal audio codec pins:
+ * HPOUTL
+ * HPOUTR
+ * SPKOUT
+ * Ext Mic
+ * Mic Bias
+
+Example:
+
+sound {
+		compatible = "sirf,sirf-audio-card";
+		sirf,audio-codec = <&audiocodec>;
+		sirf,audio-platform = <&audioport>;
+		hp-pa-gpios = <&gpio 44 0>;
+		spk-pa-gpios = <&gpio 46 0>;
+		hp-switch-gpios = <&gpio 45 0>;
+};
+
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 0000000000..a48d040b0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+  - Jose Abreu <joabreu@synopsys.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: canaan,k210-i2s
+          - const: snps,designware-i2s
+      - enum:
+          - snps,designware-i2s
+          - starfive,jh7110-i2stx0
+          - starfive,jh7110-i2stx1
+          - starfive,jh7110-i2srx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The interrupt line number for the I2S controller. Add this
+      parameter if the I2S controller that you are using does not
+      support DMA.
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Sampling rate reference clock
+      - description: APB clock
+      - description: Audio master clock
+      - description: Inner audio master clock source
+      - description: External audio master clock source
+      - description: Bit clock
+      - description: Left/right channel clock
+      - description: External bit clock
+      - description: External left/right channel clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: i2sclk
+      - const: apb
+      - const: mclk
+      - const: mclk_inner
+      - const: mclk_ext
+      - const: bclk
+      - const: lrck
+      - const: bclk_ext
+      - const: lrck_ext
+    minItems: 1
+
+  resets:
+    items:
+      - description: Optional controller resets
+      - description: controller reset of Sampling rate
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+    minItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+    minItems: 1
+
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller sys_syscon node.
+          - description: I2S-rx enabled control offset of SYS_SYSCONSAIF__SYSCFG register.
+          - description: I2S-rx enabled control mask
+    description:
+      The phandle to System Register Controller syscon node and the I2S-rx(ADC)
+      enabled control offset and mask of SYS_SYSCONSAIF__SYSCFG register.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: canaan,k210-i2s
+    then:
+      properties:
+        "#sound-dai-cells":
+          const: 1
+    else:
+      properties:
+        "#sound-dai-cells":
+          const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: snps,designware-i2s
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+        resets:
+          maxItems: 1
+    else:
+      properties:
+        resets:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-i2stx0
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          minItems: 5
+          maxItems: 5
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-i2stx1
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          minItems: 9
+          maxItems: 9
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-i2srx
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          minItems: 9
+          maxItems: 9
+      required:
+        - resets
+        - starfive,syscon
+    else:
+      properties:
+        starfive,syscon: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+oneOf:
+  - required:
+      - dmas
+      - dma-names
+  - required:
+      - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc_i2s: i2s@7ff90000 {
+      compatible = "snps,designware-i2s";
+      reg = <0x7ff90000 0x1000>;
+      clocks = <&scpi_i2sclk 0>;
+      clock-names = "i2sclk";
+      #sound-dai-cells = <0>;
+      dmas = <&dma0 5>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/soc-ac97link.txt b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
new file mode 100644
index 0000000000..80152a87f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/soc-ac97link.txt
@@ -0,0 +1,28 @@
+AC97 link bindings
+
+These bindings can be included within any other device node.
+
+Required properties:
+ - pinctrl-names: Has to contain following states to setup the correct
+   pinmuxing for the used gpios:
+	"ac97-running": AC97-link is active
+	"ac97-reset": AC97-link reset state
+	"ac97-warm-reset": AC97-link warm reset state
+ - ac97-gpios: List of gpio phandles with args in the order ac97-sync,
+   ac97-sdata, ac97-reset
+
+
+Example:
+
+ssi {
+	...
+
+	pinctrl-names = "default", "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&ac97link_running>;
+	pinctrl-1 = <&ac97link_running>;
+	pinctrl-2 = <&ac97link_reset>;
+	pinctrl-3 = <&ac97link_warm_reset>;
+	ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>;
+
+	...
+};
diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
new file mode 100644
index 0000000000..8600520d7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/socionext,uniphier-aio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier AIO audio system
+
+maintainers:
+  - <alsa-devel@alsa-project.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-ld11-aio
+      - socionext,uniphier-ld20-aio
+      - socionext,uniphier-pxs2-aio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aio
+
+  clocks:
+    maxItems: 1
+
+  reset-names:
+    const: aio
+
+  resets:
+    maxItems: 1
+
+  socionext,syscon:
+    description: |
+      Specifies a phandle to soc-glue, which is used for changing mode of S/PDIF
+      signal pin to output from Hi-Z. This property is optional if you use I2S
+      signal pins only.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "#sound-dai-cells":
+    const: 1
+
+patternProperties:
+  "^port@[0-9]$":
+    description: |
+      Port number of DT node is specified by the following DAI channels that
+      depends on SoC.
+      ld11-aio,ld20-aio:
+        0: hdmi
+        1: pcmin2
+        2: line
+        3: hpcmout1
+        4: pcmout3
+        5: hiecout1
+        6: epcmout2
+        7: epcmout3
+        8: hieccompout1
+      pxs2-aio:
+        0: hdmi
+        1: line
+        2: aux
+        3: hiecout1
+        4: iecout1
+        5: hieccompout1
+        6: ieccompout1
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - reset-names
+  - resets
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    audio@56000000 {
+        compatible = "socionext,uniphier-ld20-aio";
+        reg = <0x56000000 0x80000>;
+        interrupts = <0 144 4>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_aout>;
+        clock-names = "aio";
+        clocks = <&sys_clk 40>;
+        reset-names = "aio";
+        resets = <&sys_rst 40>;
+        #sound-dai-cells = <1>;
+        socionext,syscon = <&soc_glue>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
new file mode 100644
index 0000000000..985277648d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/socionext,uniphier-evea.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier EVEA SoC-internal sound codec
+
+maintainers:
+  - <alsa-devel@alsa-project.org>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-evea
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: evea
+      - const: exiv
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: evea
+      - const: exiv
+      - const: adamv
+
+  resets:
+    minItems: 3
+    maxItems: 3
+
+  "#sound-dai-cells":
+    const: 1
+
+patternProperties:
+  "^port@[0-9]$":
+    description: |
+      Port number of DT node is specified by the following DAI channels.
+        0: line1
+        1: hp
+        2: line2
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - reset-names
+  - resets
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    codec@57900000 {
+        compatible = "socionext,uniphier-evea";
+        reg = <0x57900000 0x1000>;
+        clock-names = "evea", "exiv";
+        clocks = <&sys_clk 41>, <&sys_clk 42>;
+        reset-names = "evea", "exiv", "adamv";
+        resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+        #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/sound-card-common.yaml b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
new file mode 100644
index 0000000000..3a941177f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sound-card-common.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sound-card-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Board Sound Card Common Properties
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+required:
+  - model
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/sound-dai.yaml b/Documentation/devicetree/bindings/sound/sound-dai.yaml
new file mode 100644
index 0000000000..ff9036e43c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sound-dai.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sound-dai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface consumer
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+select: true
+
+properties:
+  sound-dai:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A phandle plus args to digital audio interface provider(s)
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/sound/spdif-receiver.txt b/Documentation/devicetree/bindings/sound/spdif-receiver.txt
new file mode 100644
index 0000000000..80f807bf8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/spdif-receiver.txt
@@ -0,0 +1,10 @@
+Device-Tree bindings for dummy spdif receiver
+
+Required properties:
+	- compatible: should be "linux,spdif-dir".
+
+Example node:
+
+	codec: spdif-receiver {
+		compatible = "linux,spdif-dir";
+	};
diff --git a/Documentation/devicetree/bindings/sound/sprd-mcdt.txt b/Documentation/devicetree/bindings/sound/sprd-mcdt.txt
new file mode 100644
index 0000000000..274ba0acbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sprd-mcdt.txt
@@ -0,0 +1,19 @@
+Spreadtrum Multi-Channel Data Transfer Binding
+
+The Multi-channel data transfer controller is used for sound stream
+transmission between audio subsystem and other AP/CP subsystem. It
+supports 10 DAC channel and 10 ADC channel, and each channel can be
+configured with DMA mode or interrupt mode.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-mcdt".
+- reg: Should contain registers address and length.
+- interrupts: Should contain one interrupt shared by all channel.
+
+Example:
+
+mcdt@41490000 {
+	compatible = "sprd,sc9860-mcdt";
+	reg = <0 0x41490000 0 0x170>;
+	interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/sprd-pcm.txt b/Documentation/devicetree/bindings/sound/sprd-pcm.txt
new file mode 100644
index 0000000000..fbbcade218
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sprd-pcm.txt
@@ -0,0 +1,23 @@
+* Spreadtrum DMA platform bindings
+
+Required properties:
+- compatible: Should be "sprd,pcm-platform".
+- dmas: Specify the list of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+Example:
+
+	audio_platform:platform@0 {
+		compatible = "sprd,pcm-platform";
+		dmas = <&agcp_dma 1 1>, <&agcp_dma 2 2>,
+		     <&agcp_dma 3 3>, <&agcp_dma 4 4>,
+		     <&agcp_dma 5 5>, <&agcp_dma 6 6>,
+		     <&agcp_dma 7 7>, <&agcp_dma 8 8>,
+		     <&agcp_dma 9 9>, <&agcp_dma 10 10>;
+		dma-names = "normal_p_l", "normal_p_r",
+			"normal_c_l", "normal_c_r",
+			"voice_c", "fast_p",
+			"loop_c", "loop_p",
+			"voip_c", "voip_p";
+	};
diff --git a/Documentation/devicetree/bindings/sound/ssm4567.txt b/Documentation/devicetree/bindings/sound/ssm4567.txt
new file mode 100644
index 0000000000..ec3d9e7004
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ssm4567.txt
@@ -0,0 +1,15 @@
+Analog Devices SSM4567 audio amplifier
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "adi,ssm4567"
+  - reg : the I2C address of the device. This will either be 0x34 (LR_SEL/ADDR connected to AGND),
+	0x35 (LR_SEL/ADDR connected to IOVDD) or 0x36 (LR_SEL/ADDR open).
+
+Example:
+
+	ssm4567: ssm4567@34 {
+		compatible = "adi,ssm4567";
+		reg = <0x34>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt
new file mode 100644
index 0000000000..52265fb757
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt
@@ -0,0 +1,101 @@
+STA32X audio CODEC
+
+The driver for this device only supports I2C.
+
+Required properties:
+
+  - compatible: "st,sta32x"
+  - reg: the I2C address of the device for I2C
+  - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+  - power-down-gpios: a GPIO spec for the power down pin. If specified,
+		      it will be deasserted before communication to the codec
+		      starts.
+
+  - Vdda-supply: regulator spec, providing 3.3V
+  - Vdd3-supply: regulator spec, providing 3.3V
+  - Vcc-supply: regulator spec, providing 5V - 26V
+
+Optional properties:
+
+  - clocks, clock-names: Clock specifier for XTI input clock.
+	If specified, the clock will be enabled when the codec is probed,
+	and disabled when it is removed. The 'clock-names' must be set to 'xti'.
+
+  -  st,output-conf: number, Selects the output configuration:
+	0: 2-channel (full-bridge) power, 2-channel data-out
+	1: 2 (half-bridge). 1 (full-bridge) on-board power
+	2: 2 Channel (Full-Bridge) Power, 1 Channel FFX
+	3: 1 Channel Mono-Parallel
+	If parameter is missing, mode 0 will be enabled.
+	This property has to be specified as '/bits/ 8' value.
+
+  -  st,ch1-output-mapping: Channel 1 output mapping
+  -  st,ch2-output-mapping: Channel 2 output mapping
+  -  st,ch3-output-mapping: Channel 3 output mapping
+	0: Channel 1
+	1: Channel 2
+	2: Channel 3
+	If parameter is missing, channel 1 is chosen.
+	This properties have to be specified as '/bits/ 8' values.
+
+  -  st,thermal-warning-recover:
+	If present, thermal warning recovery is enabled.
+
+  - st,fault-detect-recovery:
+	If present, fault detect recovery is enabled.
+
+  -  st,thermal-warning-adjustment:
+	If present, thermal warning adjustment is enabled.
+
+  -  st,fault-detect-recovery:
+	If present, then fault recovery will be enabled.
+
+  -  st,drop-compensation-ns: number
+	Only required for "st,ffx-power-output-mode" ==
+	"variable-drop-compensation".
+	Specifies the drop compensation in nanoseconds.
+	The value must be in the range of 0..300, and only
+	multiples of 20 are allowed. Default is 140ns.
+
+  -  st,max-power-use-mpcc:
+	If present, then MPCC bits are used for MPC coefficients,
+	otherwise standard MPC coefficients are used.
+
+  -  st,max-power-corr:
+	If present, power bridge correction for THD reduction near maximum
+	power output is enabled.
+
+  -  st,am-reduction-mode:
+	If present, FFX mode runs in AM reduction mode, otherwise normal
+	FFX mode is used.
+
+  -  st,odd-pwm-speed-mode:
+	If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
+	channels. If not present, normal PWM spped mode (384 kHz) will be used.
+
+  -  st,invalid-input-detect-mute:
+	If present, automatic invalid input detect mute is enabled.
+
+Example:
+
+codec: sta32x@38 {
+	compatible = "st,sta32x";
+	reg = <0x1c>;
+	clocks = <&clock>;
+	clock-names = "xti";
+	reset-gpios = <&gpio1 19 0>;
+	power-down-gpios = <&gpio1 16 0>;
+	st,output-conf = /bits/ 8  <0x3>;	// set output to 2-channel
+						// (full-bridge) power,
+						// 2-channel data-out
+	st,ch1-output-mapping = /bits/ 8 <0>;	// set channel 1 output ch 1
+	st,ch2-output-mapping = /bits/ 8 <0>;	// set channel 2 output ch 1
+	st,ch3-output-mapping = /bits/ 8 <0>;	// set channel 3 output ch 1
+	st,max-power-correction;		// enables power bridge
+						// correction for THD reduction
+						// near maximum power output
+	st,invalid-input-detect-mute;		// mute if no valid digital
+						// audio signal is provided.
+};
diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt
new file mode 100644
index 0000000000..307398ef23
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,sta350.txt
@@ -0,0 +1,131 @@
+STA350 audio CODEC
+
+The driver for this device only supports I2C.
+
+Required properties:
+
+  - compatible: "st,sta350"
+  - reg: the I2C address of the device for I2C
+  - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+  - power-down-gpios: a GPIO spec for the power down pin. If specified,
+		      it will be deasserted before communication to the codec
+		      starts.
+
+  - vdd-dig-supply: regulator spec, providing 3.3V
+  - vdd-pll-supply: regulator spec, providing 3.3V
+  - vcc-supply: regulator spec, providing 5V - 26V
+
+Optional properties:
+
+  -  st,output-conf: number, Selects the output configuration:
+	0: 2-channel (full-bridge) power, 2-channel data-out
+	1: 2 (half-bridge). 1 (full-bridge) on-board power
+	2: 2 Channel (Full-Bridge) Power, 1 Channel FFX
+	3: 1 Channel Mono-Parallel
+	If parameter is missing, mode 0 will be enabled.
+	This property has to be specified as '/bits/ 8' value.
+
+  -  st,ch1-output-mapping: Channel 1 output mapping
+  -  st,ch2-output-mapping: Channel 2 output mapping
+  -  st,ch3-output-mapping: Channel 3 output mapping
+	0: Channel 1
+	1: Channel 2
+	2: Channel 3
+	If parameter is missing, channel 1 is chosen.
+	This properties have to be specified as '/bits/ 8' values.
+
+  -  st,thermal-warning-recover:
+	If present, thermal warning recovery is enabled.
+
+  -  st,thermal-warning-adjustment:
+	If present, thermal warning adjustment is enabled.
+
+  -  st,fault-detect-recovery:
+	If present, then fault recovery will be enabled.
+
+  -  st,ffx-power-output-mode: string
+	The FFX power output mode selects how the FFX output timing is
+	configured. Must be one of these values:
+	  -  "drop-compensation"
+	  -  "tapered-compensation"
+	  -  "full-power-mode"
+	  -  "variable-drop-compensation" (default)
+
+  -  st,drop-compensation-ns: number
+	Only required for "st,ffx-power-output-mode" ==
+	"variable-drop-compensation".
+	Specifies the drop compensation in nanoseconds.
+	The value must be in the range of 0..300, and only
+	multiples of 20 are allowed. Default is 140ns.
+
+  -  st,overcurrent-warning-adjustment:
+	If present, overcurrent warning adjustment is enabled.
+
+  -  st,max-power-use-mpcc:
+	If present, then MPCC bits are used for MPC coefficients,
+	otherwise standard MPC coefficients are used.
+
+  -  st,max-power-corr:
+	If present, power bridge correction for THD reduction near maximum
+	power output is enabled.
+
+  -  st,am-reduction-mode:
+	If present, FFX mode runs in AM reduction mode, otherwise normal
+	FFX mode is used.
+
+  -  st,odd-pwm-speed-mode:
+	If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
+	channels. If not present, normal PWM spped mode (384 kHz) will be used.
+
+  -  st,distortion-compensation:
+	If present, distortion compensation variable uses DCC coefficient.
+	If not present, preset DC coefficient is used.
+
+  -  st,invalid-input-detect-mute:
+	If present, automatic invalid input detect mute is enabled.
+
+  -  st,activate-mute-output:
+	If present, a mute output will be activated in ase the volume will
+	reach a value lower than -76 dBFS.
+
+  -  st,bridge-immediate-off:
+	If present, the bridge will be switched off immediately after the
+	power-down-gpio goes low. Otherwise, the bridge will wait for 13
+	million clock cycles to pass before shutting down.
+
+  -  st,noise-shape-dc-cut:
+	If present, the noise-shaping technique on the DC cutoff filter are
+	enabled.
+
+  -  st,powerdown-master-volume:
+	If present, the power-down pin and I2C power-down functions will
+	act on the master volume. Otherwise, the functions will act on the
+	mute commands.
+
+  -  st,powerdown-delay-divider:
+	If present, the bridge power-down time will be divided by the provided
+	value. If not specified, a divider of 1 will be used. Allowed values
+	are 1, 2, 4, 8, 16, 32, 64 and 128.
+	This property has to be specified as '/bits/ 8' value.
+
+Example:
+
+codec: sta350@38 {
+	compatible = "st,sta350";
+	reg = <0x1c>;
+	reset-gpios = <&gpio1 19 0>;
+	power-down-gpios = <&gpio1 16 0>;
+	st,output-conf = /bits/ 8  <0x3>;	// set output to 2-channel
+						// (full-bridge) power,
+						// 2-channel data-out
+	st,ch1-output-mapping = /bits/ 8 <0>;	// set channel 1 output ch 1
+	st,ch2-output-mapping = /bits/ 8 <0>;	// set channel 2 output ch 1
+	st,ch3-output-mapping = /bits/ 8 <0>;	// set channel 3 output ch 1
+	st,max-power-correction;		// enables power bridge
+						// correction for THD reduction
+						// near maximum power output
+	st,invalid-input-detect-mute;		// mute if no valid digital
+						// audio signal is provided.
+};
diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
new file mode 100644
index 0000000000..a6ffcdec6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
@@ -0,0 +1,164 @@
+STMicroelectronics sti ASoC cards
+
+The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas
+codec or external codecs.
+
+sti sound drivers allows to expose sti SoC audio interface through the
+generic ASoC simple card. For details about sound card declaration please refer to
+Documentation/devicetree/bindings/sound/simple-card.yaml.
+
+1) sti-uniperiph-dai: audio dai device.
+---------------------------------------
+
+Required properties:
+  - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out",
+		"st,stih407-uni-player-dac", "st,stih407-uni-player-spdif",
+		"st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi",
+
+  - st,syscfg: phandle to boot-device system configuration registers
+
+  - clock-names: name of the clocks listed in clocks property in the same order
+
+  - reg: CPU DAI IP Base address and size entries, listed  in same
+	 order than the CPU_DAI properties.
+
+  - reg-names: names of the mapped memory regions listed in regs property in
+	       the same order.
+
+  - interrupts: CPU_DAI interrupt line, listed in the same order than the
+		CPU_DAI properties.
+
+  - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same
+	 order than the CPU_DAI properties.
+
+  - dma-names: identifier string for each DMA request line in the dmas property.
+	"tx" for "st,sti-uni-player" compatibility
+	"rx" for "st,sti-uni-reader" compatibility
+
+Required properties ("st,sti-uni-player" compatibility only):
+  - clocks: CPU_DAI IP clock source, listed in the same order than the
+	    CPU_DAI properties.
+
+Optional properties:
+  - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
+	       external codecs connection.
+
+  - pinctrl-names: should contain only one value - "default".
+
+  - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs.
+	Only compartible with IPs in charge of the external I2S/TDM bus.
+	Should be declared depending on associated codec.
+
+Example:
+
+	sti_uni_player1: sti-uni-player@8d81000 {
+		compatible = "st,stih407-uni-player-hdmi";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+		reg = <0x8D81000 0x158>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 3 0 1>;
+		dma-names = "tx";
+		st,tdm-mode = <1>;
+	};
+
+	sti_uni_player2: sti-uni-player@8d82000 {
+		compatible = "st,stih407-uni-player-pcm-out";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		reg = <0x8D82000 0x158>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 4 0 1>;
+		dma-names = "tx";
+	};
+
+	sti_uni_player3: sti-uni-player@8d85000 {
+		compatible = "st,stih407-uni-player-spdif";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+		reg = <0x8D85000 0x158>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 7 0 1>;
+		dma-names = "tx";
+	};
+
+	sti_uni_reader1: sti-uni-reader@8d84000 {
+		compatible = "st,stih407-uni-reader-hdmi";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		reg = <0x8D84000 0x158>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 6 0 1>;
+		dma-names = "rx";
+	};
+
+2) sti-sas-codec: internal audio codec IPs driver
+-------------------------------------------------
+
+Required properties:
+  - compatible: "st,sti<chip>-sas-codec" .
+	Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec"
+
+  - st,syscfg: phandle to boot-device system configuration registers.
+
+  - pinctrl-0: SPDIF PIO description.
+
+  - pinctrl-names: should contain only one value - "default".
+
+Example:
+	sti_sas_codec: sti-sas-codec {
+		compatible = "st,stih407-sas-codec";
+		#sound-dai-cells = <1>;
+		st,reg_audio = <&syscfg_core>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spdif_out >;
+	};
+
+Example of audio card declaration:
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sti audio card";
+
+		simple-audio-card,dai-link@0 {
+			/* DAC */
+			format = "i2s";
+			dai-tdm-slot-width = <32>;
+			cpu {
+				sound-dai = <&sti_uni_player2>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 1>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			/* SPDIF */
+			format = "left_j";
+			cpu {
+				sound-dai = <&sti_uni_player3>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 0>;
+			};
+		};
+		simple-audio-card,dai-link@2 {
+			/* TDM playback  */
+			format = "left_j";
+			frame-inversion = <1>;
+			cpu {
+				sound-dai = <&sti_uni_player1>;
+				dai-tdm-slot-num = <16>;
+				dai-tdm-slot-width = <16>;
+				dai-tdm-slot-tx-mask =
+					<1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1>;
+			};
+
+			codec {
+				sound-dai = <&sti_sasg_codec 3>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
new file mode 100644
index 0000000000..b9111d375b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI/I2S Controller
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description:
+  The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+  Only some SPI instances support I2S.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock feeding the peripheral bus interface.
+      - description: clock feeding the internal clock generator.
+      - description: I2S parent clock for sampling rates multiple of 8kHz.
+      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2sclk
+      - const: x8k
+      - const: x11k
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio capture DMA.
+      - description: audio playback DMA.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  "#clock-cells":
+    description: Configure the I2S device as MCLK clock provider.
+    const: 0
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    i2s2: audio-controller@4000b000 {
+        compatible = "st,stm32h7-i2s";
+        #sound-dai-cells = <0>;
+        reg = <0x4000b000 0x400>;
+        clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+        clock-names = "pclk", "i2sclk", "x8k", "x11k";
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 39 0x400 0x01>,
+               <&dmamux1 40 0x400 0x01>;
+        dma-names = "rx", "tx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2s2_pins_a>;
+
+        /* assume audio-graph */
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
new file mode 100644
index 0000000000..59df8a8323
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Serial Audio Interface (SAI)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description:
+  The SAI interface (Serial Audio Interface) offers a wide set of audio
+  protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
+  The SAI contains two independent audio sub-blocks. Each sub-block has
+  its own clock generator and I/O lines controller.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-sai
+      - st,stm32h7-sai
+
+  reg:
+    items:
+      - description: Base address and size of SAI common register set.
+      - description: Base address and size of SAI identification register set.
+    minItems: 1
+
+  ranges:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^audio-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Two subnodes corresponding to SAI sub-block instances A et B
+      can be defined. Subnode can be omitted for unused sub-block.
+
+    properties:
+      compatible:
+        description: Compatible for SAI sub-block A or B.
+        pattern: "st,stm32-sai-sub-[ab]"
+
+      "#sound-dai-cells":
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: sai_ck clock feeding the internal clock generator.
+          - description: MCLK clock from a SAI set as master clock provider.
+        minItems: 1
+
+      clock-names:
+        items:
+          - const: sai_ck
+          - const: MCLK
+        minItems: 1
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        description: |
+          rx: SAI sub-block is configured as a capture DAI.
+          tx: SAI sub-block is configured as a playback DAI.
+        enum: [ rx, tx ]
+
+      st,sync:
+        description:
+          Configure the SAI sub-block as slave of another SAI sub-block.
+          By default SAI sub-block is in asynchronous mode.
+          Must contain the phandle and index of the SAI sub-block providing
+          the synchronization.
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          - items:
+              - description: phandle of the SAI sub-block
+              - description: index of the SAI sub-block
+
+      st,iec60958:
+        description:
+          If set, support S/PDIF IEC6958 protocol for playback.
+          IEC60958 protocol is not available for capture.
+          By default, custom protocol is assumed, meaning that protocol is
+          configured according to protocol defined in related DAI link node,
+          such as i2s, left justified, right justified, dsp and pdm protocols.
+        $ref: /schemas/types.yaml#/definitions/flag
+
+      "#clock-cells":
+        description: Configure the SAI device as master clock provider.
+        const: 0
+
+      port:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+      - "#sound-dai-cells"
+      - reg
+      - clocks
+      - clock-names
+      - dmas
+      - dma-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-sai
+    then:
+      properties:
+        clocks:
+          items:
+            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
+            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
+
+        clock-names:
+          items:
+            - const: x8k
+            - const: x11k
+    else:
+      properties:
+        clocks:
+          items:
+            - description: pclk feeds the peripheral bus interface.
+            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
+            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
+
+        clock-names:
+          items:
+            - const: pclk
+            - const: x8k
+            - const: x11k
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    sai2: sai@4400b000 {
+      compatible = "st,stm32h7-sai";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x4400b000 0x400>;
+      reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+      clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+      clock-names = "pclk", "x8k", "x11k";
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+      pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+
+      sai2a: audio-controller@4400b004 {
+        #sound-dai-cells = <0>;
+        compatible = "st,stm32-sai-sub-a";
+        reg = <0x4 0x1c>;
+        dmas = <&dmamux1 89 0x400 0x01>;
+        dma-names = "tx";
+        clocks = <&rcc SAI2_K>;
+        clock-names = "sai_ck";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
new file mode 100644
index 0000000000..bc48151b9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@foss.st.com>
+
+description: |
+  The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+  IEC-60958 and IEC-61937.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-spdifrx
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio data capture DMA
+      - description: IEC status bits capture DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: rx-ctrl
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    spdifrx: spdifrx@40004000 {
+        compatible = "st,stm32h7-spdifrx";
+        #sound-dai-cells = <0>;
+        reg = <0x40004000 0x400>;
+        clocks = <&rcc SPDIF_K>;
+        clock-names = "kclk";
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 2 93 0x400 0x0>,
+               <&dmamux1 3 94 0x400 0x0>;
+        dma-names = "rx", "rx-ctrl";
+        pinctrl-0 = <&spdifrx_pins>;
+        pinctrl-names = "default";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
new file mode 100644
index 0000000000..abb373fbfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/starfive,jh7110-tdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 TDM Controller
+
+description: |
+  The TDM Controller is a Time Division Multiplexed audio interface
+  integrated in StarFive JH7110 SoC, allowing up to 8 channels of
+  audio over a serial interface. The TDM controller can operate both
+  in master and slave mode.
+
+maintainers:
+  - Walker Chen <walker.chen@starfivetech.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7110-tdm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: TDM AHB Clock
+      - description: TDM APB Clock
+      - description: TDM Internal Clock
+      - description: TDM Clock
+      - description: Inner MCLK
+      - description: TDM External Clock
+
+  clock-names:
+    items:
+      - const: tdm_ahb
+      - const: tdm_apb
+      - const: tdm_internal
+      - const: tdm
+      - const: mclk_inner
+      - const: tdm_ext
+
+  resets:
+    items:
+      - description: tdm ahb reset line
+      - description: tdm apb reset line
+      - description: tdm core reset line
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    tdm@10090000 {
+        compatible = "starfive,jh7110-tdm";
+        reg = <0x10090000 0x1000>;
+        clocks = <&syscrg 184>,
+                 <&syscrg 185>,
+                 <&syscrg 186>,
+                 <&syscrg 187>,
+                 <&syscrg 17>,
+                 <&tdm_ext>;
+        clock-names = "tdm_ahb", "tdm_apb",
+                      "tdm_internal", "tdm",
+                      "mclk_inner", "tdm_ext";
+        resets = <&syscrg 105>,
+                 <&syscrg 107>,
+                 <&syscrg 106>;
+        dmas = <&dma 20>, <&dma 21>;
+        dma-names = "rx","tx";
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/storm.txt b/Documentation/devicetree/bindings/sound/storm.txt
new file mode 100644
index 0000000000..062a4c185f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/storm.txt
@@ -0,0 +1,23 @@
+* Sound complex for Storm boards
+
+Models a soundcard for Storm boards with the Qualcomm Technologies IPQ806x SOC
+connected to a MAX98357A DAC via I2S.
+
+Required properties:
+
+- compatible	: "google,storm-audio"
+- cpu		: Phandle of the CPU DAI
+- codec		: Phandle of the codec DAI
+
+Optional properties:
+
+- qcom,model	: The user-visible name of this sound card.
+
+Example:
+
+sound {
+	compatible = "google,storm-audio";
+	qcom,model = "ipq806x-storm";
+	cpu = <&lpass_cpu>;
+	codec = <&max98357a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt
new file mode 100644
index 0000000000..a7eecad83d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2552.txt
@@ -0,0 +1,36 @@
+Texas Instruments - tas2552 Codec module
+
+The tas2552 serial control bus communicates through I2C protocols
+
+Required properties:
+	- compatible - One of:
+		"ti,tas2552" - TAS2552
+	- reg -  I2C slave address: it can be 0x40 if ADDR pin is 0
+				    or 0x41 if ADDR pin is 1.
+	- supply-*: Required supply regulators are:
+		"vbat"		battery voltage
+		"iovdd"		I/O Voltage
+		"avdd"		Analog DAC Voltage
+
+Optional properties:
+	- enable-gpio - gpio pin to enable/disable the device
+
+tas2552 can receive its reference clock via MCLK, BCLK, IVCLKIN pin or use the
+internal 1.8MHz. This CLKIN is used by the PLL. In addition to PLL, the PDM
+reference clock is also selectable: PLL, IVCLKIN, BCLK or MCLK.
+For system integration the dt-bindings/sound/tas2552.h header file provides
+defined values to select and configure the PLL and PDM reference clocks.
+
+Example:
+
+tas2552: tas2552@41 {
+	compatible = "ti,tas2552";
+	reg = <0x41>;
+	vbat-supply = <&reg_vbat>;
+	iovdd-supply = <&reg_iovdd>;
+	avdd-supply = <&reg_avdd>;
+	enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+};
+
+For more product information please see the link below:
+https://www.ti.com/product/TAS2552
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
new file mode 100644
index 0000000000..f01c0dde0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas2562.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2562 Smart PA
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+  Specifications about the audio amplifier can be found at:
+    https://www.ti.com/lit/gpn/tas2562
+    https://www.ti.com/lit/gpn/tas2563
+    https://www.ti.com/lit/gpn/tas2564
+    https://www.ti.com/lit/gpn/tas2110
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2562
+      - ti,tas2563
+      - ti,tas2564
+      - ti,tas2110
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  shut-down-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+    deprecated: true
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  '#sound-dai-cells':
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@4c {
+       compatible = "ti,tas2562";
+       reg = <0x4c>;
+       #sound-dai-cells = <0>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+     };
+   };
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
new file mode 100644
index 0000000000..be2536e8c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019-20 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas2770.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2770 Smart PA
+
+maintainers:
+  - Shi Fu <shifu0704@thundersoft.com>
+
+description: |
+  The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2770
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x41 to 0x48.
+
+  reset-gpio:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  ti,asi-format:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets TDM RX capture edge.
+    enum:
+      - 0 # Rising edge
+      - 1 # Falling edge
+
+  '#sound-dai-cells':
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@41 {
+       compatible = "ti,tas2770";
+       reg = <0x41>;
+       #sound-dai-cells = <0>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpio = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 14 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml
new file mode 100644
index 0000000000..f2d878f6f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020-2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas27xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2764/TAS2780 Smart PA
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+
+description: |
+  The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier
+  optimized for efficiently driving high peak power into small
+  loudspeakers. Integrated speaker voltage and current sense provides
+  for real time monitoring of loudspeaker behavior.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2764
+      - ti,tas2780
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x38 to 0x45.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  '#sound-dai-cells':
+    # The codec has a single DAI, the #sound-dai-cells=<1>; case is left in for backward
+    # compatibility but is deprecated.
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@38 {
+       compatible = "ti,tas2764";
+       reg = <0x38>;
+       #sound-dai-cells = <0>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpios = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt
new file mode 100644
index 0000000000..1addc75989
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas571x.txt
@@ -0,0 +1,49 @@
+Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers
+
+The codec is controlled through an I2C interface.  It also has two other
+signals that can be wired up to GPIOs: reset (strongly recommended), and
+powerdown (optional).
+
+Required properties:
+
+- compatible: should be one of the following:
+  - "ti,tas5707"
+  - "ti,tas5711",
+  - "ti,tas5717",
+  - "ti,tas5719",
+  - "ti,tas5721"
+  - "ti,tas5733"
+- reg: The I2C address of the device
+- #sound-dai-cells: must be equal to 0
+
+Optional properties:
+
+- reset-gpios: GPIO specifier for the TAS571x's active low reset line
+- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line
+- clocks: clock phandle for the MCLK input
+- clock-names: should be "mclk"
+- AVDD-supply: regulator phandle for the AVDD supply (all chips)
+- DVDD-supply: regulator phandle for the DVDD supply (all chips)
+- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719)
+- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719)
+- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719)
+- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711)
+- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
+- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
+- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)
+- DRVDD-supply: regulator phandle for the DRVDD supply (5721)
+- PVDD-supply: regulator phandle for the PVDD supply (5721)
+
+Example:
+
+	tas5717: audio-codec@2a {
+		compatible = "ti,tas5717";
+		reg = <0x2a>;
+		#sound-dai-cells = <0>;
+
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clk_core CLK_I2S>;
+		clock-names = "mclk";
+	};
diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt
new file mode 100644
index 0000000000..7d851ae2bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas5720.txt
@@ -0,0 +1,28 @@
+Texas Instruments TAS5720 Mono Audio amplifier
+
+The TAS5720 serial control bus communicates through the I2C protocol only. The
+serial bus is also used for periodic codec fault checking/reporting during
+audio playback. For more product information please see the links below:
+
+https://www.ti.com/product/TAS5720L
+https://www.ti.com/product/TAS5720M
+https://www.ti.com/product/TAS5720A-Q1
+https://www.ti.com/product/TAS5722L
+
+Required properties:
+
+- compatible : "ti,tas5720",
+               "ti,tas5720a-q1",
+               "ti,tas5722"
+- reg : I2C slave address
+- dvdd-supply : phandle to a 3.3-V supply for the digital circuitry
+- pvdd-supply : phandle to a supply used for the Class-D amp and the analog
+
+Example:
+
+tas5720: tas5720@6c {
+	compatible = "ti,tas5720";
+	reg = <0x6c>;
+	dvdd-supply = <&vdd_3v3_reg>;
+	pvdd-supply = <&amp_supply_reg>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/tas5805m.yaml
new file mode 100644
index 0000000000..63edf52f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas5805m.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas5805m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TAS5805M audio amplifier
+
+maintainers:
+  - Daniel Beer <daniel.beer@igorinstitute.com>
+
+description: |
+  The TAS5805M is a class D audio amplifier with a built-in DSP.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas5805m
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address of the amplifier. See the datasheet for possible values.
+
+  pvdd-supply:
+    description: |
+      Regulator for audio power supply (PVDD in the datasheet).
+
+  pdn-gpios:
+    description: |
+      Power-down control GPIO (PDN pin in the datasheet).
+
+  ti,dsp-config-name:
+    description: |
+      The name of the DSP configuration that should be loaded for this
+      instance. Configuration blobs are sequences of register writes
+      generated from TI's PPC3 tool.
+    $ref: /schemas/types.yaml#/definitions/string
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tas5805m: tas5805m@2c {
+                reg = <0x2c>;
+                compatible = "ti,tas5805m";
+
+                pvdd-supply = <&audiopwr>;
+                pdn-gpios = <&tlmm 160 0>;
+
+                ti,dsp-config-name = "mono_pbtl_48khz";
+        };
+    };
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/tda7419.txt b/Documentation/devicetree/bindings/sound/tda7419.txt
new file mode 100644
index 0000000000..6b85ec38dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tda7419.txt
@@ -0,0 +1,38 @@
+TDA7419 audio processor
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "st,tda7419"
+- reg : the I2C address of the device.
+- vdd-supply : a regulator spec for the common power supply (8-10V)
+
+Optional properties:
+
+- st,mute-gpios : a GPIO spec for the MUTE pin.
+
+Pins on the device (for linking into audio routes):
+
+  * SE3L
+  * SE3R
+  * SE2L
+  * SE2R
+  * SE1L
+  * SE1R
+  * DIFFL
+  * DIFFR
+  * MIX
+  * OUTLF
+  * OUTRF
+  * OUTLR
+  * OUTRR
+  * OUTSW
+
+Example:
+
+ap: tda7419@44 {
+	compatible = "st,tda7419";
+	reg = <0x44>;
+	vdd-supply = <&vdd_9v0_reg>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tdm-slot.txt b/Documentation/devicetree/bindings/sound/tdm-slot.txt
new file mode 100644
index 0000000000..4bb513ae62
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tdm-slot.txt
@@ -0,0 +1,29 @@
+TDM slot:
+
+This specifies audio DAI's TDM slot.
+
+TDM slot properties:
+dai-tdm-slot-num : Number of slots in use.
+dai-tdm-slot-width : Width in bits for each slot.
+dai-tdm-slot-tx-mask : Transmit direction slot mask, optional
+dai-tdm-slot-rx-mask : Receive direction slot mask, optional
+
+For instance:
+	dai-tdm-slot-num = <2>;
+	dai-tdm-slot-width = <8>;
+	dai-tdm-slot-tx-mask = <0 1>;
+	dai-tdm-slot-rx-mask = <1 0>;
+
+And for each specified driver, there could be one .of_xlate_tdm_slot_mask()
+to specify an explicit mapping of the channels and the slots. If it's absent
+the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
+tx and rx masks.
+
+For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
+for an active slot as default, and the default active bits are at the LSB of
+the masks.
+
+The explicit masks are given as array of integers, where the first
+number presents bit-0 (LSB), second presents bit-1, etc. Any non zero
+number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask()
+does not do anything, if either mask is set non zero value.
diff --git a/Documentation/devicetree/bindings/sound/test-component.yaml b/Documentation/devicetree/bindings/sound/test-component.yaml
new file mode 100644
index 0000000000..9c40a2122d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/test-component.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/test-component.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Test Component
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - test-cpu
+      - test-cpu-verbose
+      - test-cpu-verbose-dai
+      - test-cpu-verbose-component
+      - test-codec
+      - test-codec-verbose
+      - test-codec-verbose-dai
+      - test-codec-verbose-component
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    test_cpu {
+        compatible = "test-cpu";
+    };
diff --git a/Documentation/devicetree/bindings/sound/tfa9879.txt b/Documentation/devicetree/bindings/sound/tfa9879.txt
new file mode 100644
index 0000000000..1620e68484
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tfa9879.txt
@@ -0,0 +1,23 @@
+NXP TFA9879 class-D audio amplifier
+
+Required properties:
+
+- compatible : "nxp,tfa9879"
+
+- reg : the I2C address of the device
+
+- #sound-dai-cells : must be 0.
+
+Example:
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+
+	amp: amp@6c {
+		#sound-dai-cells = <0>;
+		compatible = "nxp,tfa9879";
+		reg = <0x6c>;
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/sound/ti,ads117x.txt b/Documentation/devicetree/bindings/sound/ti,ads117x.txt
new file mode 100644
index 0000000000..7db19b5086
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,ads117x.txt
@@ -0,0 +1,11 @@
+Texas Intstruments ADS117x ADC
+
+Required properties:
+
+  - compatible : "ti,ads1174" or "ti,ads1178"
+
+Example:
+
+ads1178 {
+	compatible = "ti,ads1178";
+};
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
new file mode 100644
index 0000000000..20ea5883b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J721e Common Processor Board Audio Support
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The audio support on the board is using pcm3168a codec connected to McASP10
+  serializers in parallel setup.
+  The pcm3168a SCKI clock is sourced from j721e AUDIO_REFCLK2 pin.
+  In order to support 48KHz and 44.1KHz family of sampling rates the parent
+  clock for AUDIO_REFCLK2 needs to be changed between PLL4 (for 48KHz) and
+  PLL15 (for 44.1KHz). The same PLLs are used for McASP10's AUXCLK clock via
+  different HSDIVIDER.
+
+  Clocking setup for j721e:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+    44.1KHz family:
+    PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+           |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+  Clocking setup for j7200:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP0_AUXCLK ---> McASP0.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-cpb-audio
+      - ti,j7200-cpb-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  ti,cpb-mcasp:
+    description: phandle to McASP used on CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,cpb-codec:
+    description: phandle to the pcm3168a codec used on the CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+
+  clock-names:
+    minItems: 4
+    maxItems: 6
+
+required:
+  - compatible
+  - model
+  - ti,cpb-mcasp
+  - ti,cpb-codec
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: Parent for CPB_McASP auxclk (for 44.1KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+            - description: Parent for CPB_SCKI clock (for 44.1KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-mcasp-auxclk-44100
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+            - const: cpb-codec-scki-44100
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+
+examples:
+  - |+
+    sound {
+        compatible = "ti,j721e-cpb-audio";
+        model = "j721e-cpb";
+
+        ti,cpb-mcasp = <&mcasp10>;
+        ti,cpb-codec = <&pcm3168a_1>;
+
+        clocks = <&k3_clks 184 1>,
+                 <&k3_clks 184 2>, <&k3_clks 184 4>,
+                 <&k3_clks 157 371>,
+                 <&k3_clks 157 400>, <&k3_clks 157 401>;
+        clock-names = "cpb-mcasp-auxclk",
+                      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+                      "cpb-codec-scki",
+                      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
new file mode 100644
index 0000000000..5b2874a80a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J721e Common Processor Board Audio Support
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+  The Infotainment board plugs into the Common Processor Board, the support of the
+  extension board is extending the CPB audio support, described in:
+  sound/ti,j721e-cpb-audio.txt
+
+  The audio support on the Infotainment Expansion Board consists of McASP0
+  connected to two pcm3168a codecs with dedicated set of serializers to each.
+  The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
+
+  In order to support 48KHz and 44.1KHz family of sampling rates the parent clock
+  for AUDIO_REFCLK0 needs to be changed between PLL4 (for 48KHz) and PLL15 (for
+  44.1KHz). The same PLLs are used for McASP0's AUXCLK clock via different
+  HSDIVIDER.
+
+  Note: the same PLL4 and PLL15 is used by the audio support on the CPB!
+
+  Clocking setup for 48KHz family:
+  PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+        |                |-> MCASP0_AUXCLK  ---> McASP0.auxclk
+        |
+        |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+                         |-> AUDIO_REFCLK0  ---> pcm3168a_a/b.SCKI
+
+  Clocking setup for 44.1KHz family:
+  PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+        |                  |-> MCASP0_AUXCLK  ---> McASP0.auxclk
+        |
+        |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2   ---> pcm3168a.SCKI
+                          |-> AUDIO_REFCLK0   ---> pcm3168a_a/b.SCKI
+
+properties:
+  compatible:
+    items:
+      - const: ti,j721e-cpb-ivi-audio
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  ti,cpb-mcasp:
+    description: phandle to McASP used on CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,cpb-codec:
+    description: phandle to the pcm3168a codec used on the CPB
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,ivi-mcasp:
+    description: phandle to McASP used on IVI
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,ivi-codec-a:
+    description: phandle to the pcm3168a-A codec on the expansion board
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,ivi-codec-b:
+    description: phandle to the pcm3168a-B codec on the expansion board
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  clocks:
+    items:
+      - description: AUXCLK clock for McASP used by CPB audio
+      - description: Parent for CPB_McASP auxclk (for 48KHz)
+      - description: Parent for CPB_McASP auxclk (for 44.1KHz)
+      - description: SCKI clock for the pcm3168a codec on CPB
+      - description: Parent for CPB_SCKI clock (for 48KHz)
+      - description: Parent for CPB_SCKI clock (for 44.1KHz)
+      - description: AUXCLK clock for McASP used by IVI audio
+      - description: Parent for IVI_McASP auxclk (for 48KHz)
+      - description: Parent for IVI_McASP auxclk (for 44.1KHz)
+      - description: SCKI clock for the pcm3168a codec on IVI
+      - description: Parent for IVI_SCKI clock (for 48KHz)
+      - description: Parent for IVI_SCKI clock (for 44.1KHz)
+
+  clock-names:
+    items:
+      - const: cpb-mcasp-auxclk
+      - const: cpb-mcasp-auxclk-48000
+      - const: cpb-mcasp-auxclk-44100
+      - const: cpb-codec-scki
+      - const: cpb-codec-scki-48000
+      - const: cpb-codec-scki-44100
+      - const: ivi-mcasp-auxclk
+      - const: ivi-mcasp-auxclk-48000
+      - const: ivi-mcasp-auxclk-44100
+      - const: ivi-codec-scki
+      - const: ivi-codec-scki-48000
+      - const: ivi-codec-scki-44100
+
+required:
+  - compatible
+  - model
+  - ti,cpb-mcasp
+  - ti,cpb-codec
+  - ti,ivi-mcasp
+  - ti,ivi-codec-a
+  - ti,ivi-codec-b
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |+
+    sound {
+        compatible = "ti,j721e-cpb-ivi-audio";
+        model = "j721e-cpb-ivi";
+
+        ti,cpb-mcasp = <&mcasp10>;
+        ti,cpb-codec = <&pcm3168a_1>;
+
+        ti,ivi-mcasp = <&mcasp0>;
+        ti,ivi-codec-a = <&pcm3168a_a>;
+        ti,ivi-codec-b = <&pcm3168a_b>;
+
+        clocks = <&k3_clks 184 1>,
+                 <&k3_clks 184 2>, <&k3_clks 184 4>,
+                 <&k3_clks 157 371>,
+                 <&k3_clks 157 400>, <&k3_clks 157 401>,
+                 <&k3_clks 174 1>,
+                 <&k3_clks 174 2>, <&k3_clks 174 4>,
+                 <&k3_clks 157 301>,
+                 <&k3_clks 157 330>, <&k3_clks 157 331>;
+        clock-names = "cpb-mcasp-auxclk",
+                      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+                      "cpb-codec-scki",
+                      "cpb-codec-scki-48000", "cpb-codec-scki-44100",
+                      "ivi-mcasp-auxclk",
+                      "ivi-mcasp-auxclk-48000", "ivi-mcasp-auxclk-44100",
+                      "ivi-codec-scki",
+                      "ivi-codec-scki-48000", "ivi-codec-scki-44100";
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.txt b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt
new file mode 100644
index 0000000000..4df17185ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.txt
@@ -0,0 +1,15 @@
+Texas Instruments PCM1681 8-channel PWM Processor
+
+Required properties:
+
+ - compatible:		Should contain "ti,pcm1681".
+ - reg:			The i2c address. Should contain <0x4c>.
+
+Examples:
+
+	i2c_bus {
+		pcm1681@4c {
+			compatible = "ti,pcm1681";
+			reg = <0x4c>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml b/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml
new file mode 100644
index 0000000000..b6a4360ab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm3168a.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm3168a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments PCM3168A Audio Codec
+
+maintainers:
+  - Damien Horsley <Damien.Horsley@imgtec.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description:
+  The Texas Instruments PCM3168A is a 24-bit Multi-channel Audio CODEC with
+  96/192kHz sampling rate, supporting both SPI and I2C bus access.
+
+properties:
+  compatible:
+    const: ti,pcm3168a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: System clock input
+
+  clock-names:
+    items:
+      - const: scki
+
+  reset-gpios:
+    items:
+      - description: |
+          GPIO line connected to the active-low RST pin of the codec.
+            RST = low: device power-down
+            RST = high: device is enabled
+
+  "#sound-dai-cells":
+    enum: [0, 1]
+
+  VDD1-supply:
+    description: Digital power supply regulator 1 (+3.3V)
+
+  VDD2-supply:
+    description: Digital power supply regulator 2 (+3.3V)
+
+  VCCAD1-supply:
+    description: ADC power supply regulator 1 (+5V)
+
+  VCCAD2-supply:
+    description: ADC power supply regulator 2 (+5V)
+
+  VCCDA1-supply:
+    description: DAC power supply regulator 1 (+5V)
+
+  VCCDA2-supply:
+    description: DAC power supply regulator 2 (+5V)
+
+  ports:
+    $ref: audio-graph-port.yaml#/definitions/port-base
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        description: Audio input port.
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        description: Audio output port.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VDD1-supply
+  - VDD2-supply
+  - VCCAD1-supply
+  - VCCAD2-supply
+  - VCCDA1-supply
+  - VCCDA2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pcm3168a: audio-codec@44 {
+            compatible = "ti,pcm3168a";
+            reg = <0x44>;
+            reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+            clocks = <&clk_core 42>;
+            clock-names = "scki";
+            VDD1-supply = <&supply3v3>;
+            VDD2-supply = <&supply3v3>;
+            VCCAD1-supply = <&supply5v0>;
+            VCCAD2-supply = <&supply5v0>;
+            VCCDA1-supply = <&supply5v0>;
+            VCCDA2-supply = <&supply5v0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml
new file mode 100644
index 0000000000..27230c682d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,src4xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments SRC4392
+
+description: |
+  The SRC4392 is a digital audio codec that can be connected via
+  I2C or SPI. Currently, only I2C bus is supported.
+
+maintainers:
+  - Matt Flax <flatmax@flatmax.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: ti,src4392
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@70 {
+            #sound-dai-cells = <0>;
+            compatible = "ti,src4392";
+            reg = <0x70>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
new file mode 100644
index 0000000000..a69e6c2233
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TAS2781 SmartAMP
+
+maintainers:
+  - Shenghao Ding <shenghao-ding@ti.com>
+
+description:
+  The TAS2781 is a mono, digital input Class-D audio amplifier
+  optimized for efficiently driving high peak power into small
+  loudspeakers. An integrated on-chip DSP supports Texas Instruments
+  Smart Amp speaker protection algorithm. The integrated speaker
+  voltage and current sense provides for real time
+  monitoring of loudspeaker behavior.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2781
+
+  reg:
+    description:
+      I2C address, in multiple tas2781s case, all the i2c address
+      aggregate as one Audio Device to support multiple audio slots.
+    maxItems: 8
+    minItems: 1
+    items:
+      minimum: 0x38
+      maximum: 0x3f
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c {
+     /* example with quad tas2781s, such as tablet or pad device */
+     #address-cells = <1>;
+     #size-cells = <0>;
+     quad_tas2781: tas2781@38 {
+       compatible = "ti,tas2781";
+       reg = <0x38>, /* Audio slot 0 */
+             <0x3a>, /* Audio slot 1 */
+             <0x39>, /* Audio slot 2 */
+             <0x3b>; /* Audio slot 3 */
+
+       #sound-dai-cells = <0>;
+       reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <15>;
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tas5086.txt b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
new file mode 100644
index 0000000000..234dad296d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
@@ -0,0 +1,48 @@
+Texas Instruments TAS5086 6-channel PWM Processor
+
+Required properties:
+
+ - compatible:		Should contain "ti,tas5086".
+ - reg:			The i2c address. Should contain <0x1b>.
+
+Optional properties:
+
+ - reset-gpio: 		A GPIO spec to define which pin is connected to the
+			chip's !RESET pin. If specified, the driver will
+			assert a hardware reset at probe time.
+
+ - ti,charge-period:	This property should contain the time in microseconds
+			that closely matches the external single-ended
+			split-capacitor charge period. The hardware chip
+			waits for this period of time before starting the
+			PWM signals. This helps reduce pops and clicks.
+
+			When not specified, the hardware default of 1300ms
+			is retained.
+
+ - ti,mid-z-channel-X:	Boolean properties, X being a number from 1 to 6.
+			If given, channel X will start with the Mid-Z start
+			sequence, otherwise the default Low-Z scheme is used.
+
+			The correct configuration depends on how the power
+			stages connected to the PWM output pins work. Not all
+			power stages are compatible to Mid-Z - please refer
+			to the datasheets for more details.
+
+			Most systems should not set any of these properties.
+
+ - avdd-supply:         Power supply for AVDD, providing 3.3V
+ - dvdd-supply:         Power supply for DVDD, providing 3.3V
+
+Examples:
+
+	i2c_bus {
+		tas5086@1b {
+			compatible = "ti,tas5086";
+			reg = <0x1b>;
+			reset-gpio = <&gpio 23 0>;
+			ti,charge-period = <156000>;
+			avdd-supply = <&vdd_3v3_reg>;
+			dvdd-supply = <&vdd_3v3_reg>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/ti,tas6424.txt b/Documentation/devicetree/bindings/sound/ti,tas6424.txt
new file mode 100644
index 0000000000..00940c4892
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tas6424.txt
@@ -0,0 +1,22 @@
+Texas Instruments TAS6424 Quad-Channel Audio amplifier
+
+The TAS6424 serial control bus communicates through I2C protocols.
+
+Required properties:
+	- compatible: "ti,tas6424" - TAS6424
+	- reg: I2C slave address
+	- sound-dai-cells: must be equal to 0
+	- standby-gpios: GPIO used to shut the TAS6424 down.
+	- mute-gpios: GPIO used to mute all the outputs
+
+Example:
+
+tas6424: tas6424@6a {
+	compatible = "ti,tas6424";
+	reg = <0x6a>;
+
+	#sound-dai-cells = <0>;
+};
+
+For more product information please see the link below:
+https://www.ti.com/product/TAS6424-Q1
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
new file mode 100644
index 0000000000..ede14ca2c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC
+
+maintainers:
+  - Ricard Wanderlof <ricardw@axis.com>
+
+description: |
+  Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC
+  https://www.ti.com/product/TLV320ADC3001
+  https://www.ti.com/product/TLV320ADC3101
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320adc3001
+      - ti,tlv320adc3101
+
+  reg:
+    maxItems: 1
+    description: I2C address
+
+  '#sound-dai-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO pin used for codec reset (RESET pin)
+
+  clocks:
+    maxItems: 1
+    description: Master clock (MCLK)
+
+  ti,dmdin-gpio1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMDIN/GPIO1 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+  ti,dmclk-gpio2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMCLK/GPIO2 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+      Note that there is currently no support for reading the GPIO pins as
+      inputs.
+
+  ti,micbias1-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS1 pin
+
+  ti,micbias2-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS2 pin
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/sound/tlv320adc3xxx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tlv320adc3101: audio-codec@18 {
+            compatible = "ti,tlv320adc3101";
+            reg = <0x18>;
+            reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>;
+            clocks = <&audio_mclk>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>;
+            ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>;
+        };
+    };
+
+    audio_mclk: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <24576000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
new file mode 100644
index 0000000000..a7cc9aa344
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic32x4.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320aic32x4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320AIC32x4 Stereo Audio codec
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  The TLV320AIC32x4 audio codec can be accessed using I2C or SPI
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2505
+      - ti,tlv320aic32x4
+      - ti,tlv320aic32x6
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master clock
+
+  clock-names:
+    items:
+      - const: mclk
+
+  av-supply:
+    description: Analog core power supply
+
+  dv-supply:
+    description: Digital core power supply
+
+  iov-supply:
+    description: Digital IO power supply
+
+  ldoin-supply:
+    description: LDO power supply
+
+  reset-gpios:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  aic32x4-gpio-func:
+    description: |
+       GPIO function configuration for pins MFP1-MFP5.
+       Types are defined in include/sound/tlv320aic32x4.h
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - iov-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      not:
+        required:
+          - ldoin-supply
+    then:
+      required:
+        - av-supply
+        - dv-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      audio-codec@18 {
+        compatible = "ti,tlv320aic32x4";
+        reg = <0x18>;
+        iov-supply = <&reg_3v3>;
+        ldoin-supply = <&reg_3v3>;
+        clocks = <&clks 201>;
+        clock-names = "mclk";
+        aic32x4-gpio-func= <
+          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+          0x04 /* MFP3 AIC32X4_MFP3_GPIO_ENABLED */
+          0xff /* AIC32X4_MFPX_DEFAULT_VALUE */
+          0x08 /* MFP5 AIC32X4_MFP5_GPIO_INPUT */
+        >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
new file mode 100644
index 0000000000..206f6d61e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320aic3x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320AIC3x Codec
+
+description: |
+  TLV320AIC3x are a series of low-power stereo audio codecs with stereo
+  headphone amplifier, as well as multiple inputs and outputs programmable in
+  single-ended or fully differential configurations.
+
+  The serial control bus supports SPI or I2C protocols, while the serial audio
+  data bus is programmable for I2S, left/right-justified, DSP, or TDM modes.
+
+  The following pins can be referred in the sound node's audio routing property:
+
+  CODEC output pins:
+     LLOUT
+     RLOUT
+     MONO_LOUT
+     HPLOUT
+     HPROUT
+     HPLCOM
+     HPRCOM
+
+  CODEC input pins for TLV320AIC3104:
+     MIC2L
+     MIC2R
+     LINE1L
+     LINE1R
+
+  CODEC input pins for other compatible codecs:
+     MIC3L
+     MIC3R
+     LINE1L
+     LINE2L
+     LINE1R
+     LINE2R
+
+maintainers:
+  - Jai Luthra <j-luthra@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320aic3x
+      - ti,tlv320aic33
+      - ti,tlv320aic3007
+      - ti,tlv320aic3106
+      - ti,tlv320aic3104
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO specification for the active low RESET input.
+
+  gpio-reset:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 1
+    description:
+      Deprecated, please use reset-gpios instead.
+    deprecated: true
+
+  ai3x-gpio-func:
+    description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+
+  ai3x-micbias-vg:
+    description: MicBias required voltage. If node is omitted then MicBias is powered down.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - const: 1
+        description: MICBIAS output is powered to 2.0V.
+      - const: 2
+        description: MICBIAS output is powered to 2.5V.
+      - const: 3
+        description: MICBIAS output is connected to AVDD.
+
+  ai3x-ocmv:
+    description: Output Common-Mode Voltage selection.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    oneOf:
+      - const: 0
+        description: 1.35V
+      - const: 1
+        description: 1.5V
+      - const: 2
+        description: 1.65V
+      - const: 3
+        description: 1.8V
+
+  AVDD-supply:
+    description: Analog DAC voltage.
+
+  IOVDD-supply:
+    description: I/O voltage.
+
+  DRVDD-supply:
+    description: ADC analog and output driver voltage.
+
+  DVDD-supply:
+    description: Digital core voltage.
+
+  '#sound-dai-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      tlv320aic3x_i2c: audio-codec@1b {
+        compatible = "ti,tlv320aic3x";
+        reg = <0x1b>;
+
+        reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+        AVDD-supply = <&regulator>;
+        IOVDD-supply = <&regulator>;
+        DRVDD-supply = <&regulator>;
+        DVDD-supply = <&regulator>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      tlv320aic3x_spi: audio-codec@0 {
+        compatible = "ti,tlv320aic3x";
+        reg = <0>; /* CS number */
+        #sound-dai-cells = <0>;
+
+        AVDD-supply = <&regulator>;
+        IOVDD-supply = <&regulator>;
+        DRVDD-supply = <&regulator>;
+        DVDD-supply = <&regulator>;
+        ai3x-ocmv = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml
new file mode 100644
index 0000000000..7859306580
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,ts3a227e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TS3A227E
+  Autonomous Audio Accessory Detection and Configuration Switch
+
+maintainers:
+  - Dylan Reid <dgreid@chromium.org>
+
+description: |
+  The TS3A227E detect headsets of 3-ring and 4-ring standards and
+  switches automatically to route the microphone correctly. It also
+  handles key press detection in accordance with the Android audio
+  headset specification v1.0.
+
+properties:
+  compatible:
+    enum:
+      - ti,ts3a227e
+
+  reg:
+    const: 0x3b
+
+  interrupts:
+    maxItems: 1
+
+  ti,micbias:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Intended MICBIAS voltage (datasheet section 9.6.7).
+    enum:
+      - 0 # 2.1 V
+      - 1 # 2.2 V
+      - 2 # 2.3 V
+      - 3 # 2.4 V
+      - 4 # 2.5 V
+      - 5 # 2.6 V
+      - 6 # 2.7 V
+      - 7 # 2.8 V
+    default: 1
+
+  ti,debounce-release-ms:
+    description: key release debounce time in ms (datasheet section 9.6.7).
+    enum:
+      - 0
+      - 20
+    default: 20
+
+  ti,debounce-press-ms:
+    description: key press debounce time in ms (datasheet section 9.6.7).
+    enum:
+      - 2
+      - 40
+      - 80
+      - 120
+    default: 80
+
+  ti,debounce-insertion-ms:
+    description: headset insertion debounce time in ms (datasheet section 9.6.5).
+    enum:
+      - 2
+      - 30
+      - 60
+      - 90
+      - 120
+      - 150
+      - 1000
+      - 2000
+    default: 90
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec: audio-controller@3b {
+            compatible = "ti,ts3a227e";
+            reg = <0x3b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
new file mode 100644
index 0000000000..f3274bcc4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
+  PDM microphones recording), high-performance audio, analog-to-digital
+  converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
+  family supports line and  microphone Inputs, and offers a programmable
+  microphone bias or supply voltage generation.
+
+  Specifications can be found at:
+    https://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+    https://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+    https://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320adc3140
+      - ti,tlv320adc5140
+      - ti,tlv320adc6140
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+      GPIO used for hardware reset.
+
+  areg-supply:
+    description: |
+      Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+      is enabled.
+
+  ti,mic-bias-source:
+    description: |
+      Indicates the source for MIC Bias.
+      0 - Mic bias is set to VREF
+      1 - Mic bias is set to VREF × 1.096
+      6 - Mic bias is set to AVDD
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 6]
+
+  ti,vref-source:
+    description: |
+      Indicates the source for MIC Bias.
+      0 - Set VREF to 2.75V
+      1 - Set VREF to 2.5V
+      2 - Set VREF to 1.375V
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  ti,pdm-edge-select:
+    description: |
+       Defines the PDMCLK sampling edge configuration for the PDM inputs.  This
+       array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
+
+       0 - (default) Odd channel is latched on the negative edge and even
+       channel is latched on the positive edge.
+       1 - Odd channel is latched on the positive edge and even channel is
+       latched on the negative edge.
+
+       PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
+       PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
+       PDMIN3 - PDMCLK latching edge used for channel 5 and 6 data
+       PDMIN4 - PDMCLK latching edge used for channel 7 and 8 data
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 1
+    default: [0, 0, 0, 0]
+
+  ti,gpi-config:
+    description: |
+       Defines the configuration for the general purpose input pins (GPI).
+       The array is defined as <GPI1 GPI2 GPI3 GPI4>.
+
+       0 - (default) disabled
+       1 - GPIX is configured as a general-purpose input (GPI)
+       2 - GPIX is configured as a master clock input (MCLK)
+       3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
+       4 - GPIX is configured as a PDM data input for channel 1 and channel
+            (PDMDIN1)
+       5 - GPIX is configured as a PDM data input for channel 3 and channel
+            (PDMDIN2)
+       6 - GPIX is configured as a PDM data input for channel 5 and channel
+            (PDMDIN3)
+       7 - GPIX is configured as a PDM data input for channel 7 and channel
+            (PDMDIN4)
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 7
+    default: [0, 0, 0, 0]
+
+  ti,gpio-config:
+    description: |
+       Defines the configuration and output drive for the General Purpose
+       Input and Output pin (GPIO1). Its value is a pair, the first value is for
+       the configuration type and the second value is for the output drive
+       type. The array is defined as <GPIO1_CFG GPIO1_DRV>
+
+       configuration for the GPIO pin can be one of the following:
+       0 - disabled
+       1 - GPIO1 is configured as a general-purpose output (GPO)
+       2 - (default) GPIO1 is configured as a device interrupt output (IRQ)
+       3 - GPIO1 is configured as a secondary ASI output (SDOUT2)
+       4 - GPIO1 is configured as a PDM clock output (PDMCLK)
+       8 - GPIO1 is configured as an input to control when MICBIAS turns on or
+           off (MICBIAS_EN)
+       9 - GPIO1 is configured as a general-purpose input (GPI)
+       10 - GPIO1 is configured as a master clock input (MCLK)
+       11 - GPIO1 is configured as an ASI input for daisy-chain (SDIN)
+       12 - GPIO1 is configured as a PDM data input for channel 1 and channel 2
+            (PDMDIN1)
+       13 - GPIO1 is configured as a PDM data input for channel 3 and channel 4
+            (PDMDIN2)
+       14 - GPIO1 is configured as a PDM data input for channel 5 and channel 6
+            (PDMDIN3)
+       15 - GPIO1 is configured as a PDM data input for channel 7 and channel 8
+            (PDMDIN4)
+
+       output drive type for the GPIO pin can be one of the following:
+       0 - Hi-Z output
+       1 - Drive active low and active high
+       2 - (default) Drive active low and weak high
+       3 - Drive active low and Hi-Z
+       4 - Drive weak low and active high
+       5 - Drive Hi-Z and active high
+
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 15
+    default: [2, 2]
+
+  ti,asi-tx-drive:
+    type: boolean
+    description: |
+      When set the device will set the Tx ASI output to a Hi-Z state for unused
+      data cycles. Default is to drive the output low on unused ASI cycles.
+
+patternProperties:
+  '^ti,gpo-config-[1-4]$':
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+       Defines the configuration and output driver for the general purpose
+       output pins (GPO).  These values are pairs, the first value is for the
+       configuration type and the second value is for the output drive type.
+       The array is defined as <GPO_CFG GPO_DRV>
+
+       GPO output configuration can be one of the following:
+
+       0 - (default) disabled
+       1 - GPOX is configured as a general-purpose output (GPO)
+       2 - GPOX is configured as a device interrupt output (IRQ)
+       3 - GPOX is configured as a secondary ASI output (SDOUT2)
+       4 - GPOX is configured as a PDM clock output (PDMCLK)
+
+       GPO output drive configuration for the GPO pins can be one of the following:
+
+       0d - (default) Hi-Z output
+       1d - Drive active low and active high
+       2d - Drive active low and weak high
+       3d - Drive active low and Hi-Z
+       4d - Drive weak low and active high
+       5d - Drive Hi-Z and active high
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      codec: codec@4c {
+        compatible = "ti,tlv320adc5140";
+        reg = <0x4c>;
+        ti,mic-bias-source = <6>;
+        ti,pdm-edge-select = <0 1 0 1>;
+        ti,gpi-config = <4 5 6 7>;
+        ti,gpio-config = <10 2>;
+        ti,gpo-config-1 = <0 0>;
+        ti,gpo-config-2 = <0 0>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
new file mode 100644
index 0000000000..bbad98d5b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -0,0 +1,77 @@
+Texas Instruments - tlv320aic31xx Codec module
+
+The tlv320aic31xx serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
+    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
+    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
+    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+    "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
+
+- reg - <int> -  I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Optional properties:
+
+- reset-gpios - GPIO specification for the active low RESET input.
+- ai31xx-micbias-vg - MicBias Voltage setting
+        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+	If this node is not mentioned or if the value is unknown, then
+	micbias	is set to 2.0V.
+- ai31xx-ocmv - output common-mode voltage setting
+        0 - 1.35V,
+        1 - 1.5V,
+        2 - 1.65V,
+        3 - 1.8V
+
+Deprecated properties:
+
+- gpio-reset - gpio pin number used for codec reset
+
+CODEC output pins:
+  * HPL
+  * HPR
+  * SPL, devices with stereo speaker amp
+  * SPR, devices with stereo speaker amp
+  * SPK, devices with mono speaker amp
+  * MICBIAS
+
+CODEC input pins:
+  * MIC1LP, devices with ADC
+  * MIC1RP, devices with ADC
+  * MIC1LM, devices with ADC
+  * AIN1, devices without ADC
+  * AIN2, devices without ADC
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
+
+tlv320aic31xx: tlv320aic31xx@18 {
+	compatible = "ti,tlv320aic311x";
+	reg = <0x18>;
+
+	ai31xx-micbias-vg = <MICBIAS_OFF>;
+
+	reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+
+	HPVDD-supply = <&regulator>;
+	SPRVDD-supply = <&regulator>;
+	SPLVDD-supply = <&regulator>;
+	AVDD-supply = <&regulator>;
+	IOVDD-supply = <&regulator>;
+	DVDD-supply = <&regulator>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tpa6130a2.txt b/Documentation/devicetree/bindings/sound/tpa6130a2.txt
new file mode 100644
index 0000000000..6dfa740e4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tpa6130a2.txt
@@ -0,0 +1,27 @@
+Texas Instruments - tpa6130a2 Codec module
+
+The tpa6130a2 serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+    "ti,tpa6130a2" - TPA6130A2
+    "ti,tpa6140a2" - TPA6140A2
+
+
+- reg - <int> -  I2C slave address
+
+- Vdd-supply - <phandle> - power supply regulator
+
+Optional properties:
+
+- power-gpio - gpio pin to power the device
+
+Example:
+
+tpa6130a2: tpa6130a2@60 {
+	compatible = "ti,tpa6130a2";
+	reg = <0x60>;
+	Vdd-supply = <&vmmc2>;
+	power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tscs42xx.txt b/Documentation/devicetree/bindings/sound/tscs42xx.txt
new file mode 100644
index 0000000000..7eea32e9d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tscs42xx.txt
@@ -0,0 +1,22 @@
+TSCS42XX Audio CODEC
+
+Required Properties:
+
+	- compatible :	"tempo,tscs42A1" for analog mic
+			"tempo,tscs42A2" for digital mic
+
+	- reg : 	<0x71> for analog mic
+			<0x69> for digital mic
+
+	- clock-names:	Must one of  the following "mclk1", "xtal", "mclk2"
+
+	- clocks:	phandle of the clock that provides the codec sysclk
+
+Example:
+
+wookie: codec@69 {
+	compatible = "tempo,tscs42A2";
+	reg = <0x69>;
+	clock-names = "xtal";
+	clocks = <&audio_xtal>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tscs454.txt b/Documentation/devicetree/bindings/sound/tscs454.txt
new file mode 100644
index 0000000000..3ba3e2d2c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tscs454.txt
@@ -0,0 +1,23 @@
+TSCS454 Audio CODEC
+
+Required Properties:
+
+	- compatible :	"tempo,tscs454"
+
+	- reg : 	<0x69>
+
+	- clock-names:	Must one of  the following "xtal", "mclk1", "mclk2"
+
+	- clocks:	phandle of the clock that provides the codec sysclk
+
+	Note: If clock is not provided then bit clock is assumed
+
+Example:
+
+redwood: codec@69 {
+	#sound-dai-cells = <1>;
+	compatible = "tempo,tscs454";
+	reg = <0x69>;
+	clock-names = "mclk1";
+	clocks = <&audio_mclk>;
+};
diff --git a/Documentation/devicetree/bindings/sound/uda1334.txt b/Documentation/devicetree/bindings/sound/uda1334.txt
new file mode 100644
index 0000000000..f64071b25e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/uda1334.txt
@@ -0,0 +1,17 @@
+UDA1334 audio CODEC
+
+This device uses simple GPIO pins for controlling codec settings.
+
+Required properties:
+
+  - compatible : "nxp,uda1334"
+  - nxp,mute-gpios: a GPIO spec for the MUTE pin.
+  - nxp,deemph-gpios: a GPIO spec for the De-emphasis pin
+
+Example:
+
+uda1334: audio-codec {
+	compatible = "nxp,uda1334";
+	nxp,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	nxp,deemph-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/sound/ux500-mop500.txt b/Documentation/devicetree/bindings/sound/ux500-mop500.txt
new file mode 100644
index 0000000000..48e071c96b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ux500-mop500.txt
@@ -0,0 +1,39 @@
+* MOP500 Audio Machine Driver
+
+This node is responsible for linking together all ux500 Audio Driver components.
+
+Required properties:
+ - compatible              : "stericsson,snd-soc-mop500"
+
+Non-standard properties:
+ - stericsson,cpu-dai      : Phandle to the CPU-side DAI
+ - stericsson,audio-codec  : Phandle to the Audio CODEC
+ - stericsson,card-name    : Over-ride default card name
+
+Example:
+
+	sound {
+		compatible = "stericsson,snd-soc-mop500";
+
+		stericsson,cpu-dai = <&msp1 &msp3>;
+		stericsson,audio-codec = <&codec>;
+	};
+
+	msp1: msp@80124000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80124000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	msp3: msp@80125000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80125000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	codec: ab8500-codec {
+		compatible = "stericsson,ab8500-codec";
+		stericsson,earpeice-cmv = <950>; /* Units in mV. */
+	};
diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt
new file mode 100644
index 0000000000..7dd1b96160
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt
@@ -0,0 +1,42 @@
+* ux500 MSP (CPU-side Digital Audio Interface)
+
+Required properties:
+ - compatible       :"stericsson,ux500-msp-i2s"
+ - reg              : Physical base address and length of the device's registers.
+
+Optional properties:
+ - interrupts       : The interrupt output from the device.
+ - <name>-supply    : Phandle to the regulator <name> supply
+
+Example:
+
+	sound {
+		compatible = "stericsson,snd-soc-mop500";
+
+		stericsson,platform-pcm-dma = <&pcm>;
+		stericsson,cpu-dai = <&msp1 &msp3>;
+		stericsson,audio-codec = <&codec>;
+	};
+
+	pcm: ux500-pcm {
+		compatible = "stericsson,ux500-pcm";
+	};
+
+	msp1: msp@80124000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80124000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	msp3: msp@80125000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80125000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	codec: ab8500-codec {
+		compatible = "stericsson,ab8500-codec";
+		stericsson,earpeice-cmv = <950>; /* Units in mV. */
+	};
diff --git a/Documentation/devicetree/bindings/sound/widgets.txt b/Documentation/devicetree/bindings/sound/widgets.txt
new file mode 100644
index 0000000000..b6de5ba3b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/widgets.txt
@@ -0,0 +1,20 @@
+Widgets:
+
+This mainly specifies audio off-codec DAPM widgets.
+
+Each entry is a pair of strings in DT:
+
+	"template-wname", "user-supplied-wname"
+
+The "template-wname" being the template widget name and currently includes:
+"Microphone", "Line", "Headphone" and "Speaker".
+
+The "user-supplied-wname" being the user specified widget name.
+
+For instance:
+	simple-audio-widgets =
+		"Microphone", "Microphone Jack",
+		"Line", "Line In Jack",
+		"Line", "Line Out Jack",
+		"Headphone", "Headphone Jack",
+		"Speaker", "Speaker External";
diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
new file mode 100644
index 0000000000..8156f30ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,arizona.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices are audio SoCs with extensive digital capabilities and a range
+  of analogue I/O.
+
+  This document lists sound specific bindings, see the primary binding
+  document ../mfd/arizona.yaml
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  wlf,inmode:
+    description:
+      A list of INn_MODE register values, where n is the number of input
+      signals. Valid values are 0 (Differential), 1 (Single-ended) and
+      2 (Digital Microphone). If absent, INn_MODE registers set to 0 by
+      default.  If present, values must be specified less than or equal
+      to the number of input signals. If values less than the number of
+      input signals, elements that have not been specified are set to 0 by
+      default. Entries are <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280,
+      wm8997) and <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 2
+      default: 0
+
+  wlf,out-mono:
+    description:
+      A list of boolean values indicating whether each output is mono
+      or stereo. Position within the list indicates the output affected
+      (eg. First entry in the list corresponds to output 1). A non-zero
+      value indicates a mono output. If present, the number of values
+      should be less than or equal to the number of outputs, if less values
+      are supplied the additional outputs will be treated as stereo.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  wlf,dmic-ref:
+    description:
+      DMIC reference voltage source for each input, can be selected from
+      either MICVDD or one of the MICBIAS's, defines (ARIZONA_DMIC_xxxx)
+      are provided in dt-bindings/mfd/arizona.h. If present, the number
+      of values should be less than or equal to the number of inputs,
+      unspecified inputs will use the chip default.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+      default: 0
+
+  wlf,max-channels-clocked:
+    description:
+      The maximum number of channels to be clocked on each AIF, useful for
+      I2S systems with multiple data lines being mastered.  Specify one
+      cell for each AIF to be configured, specify zero for AIFs that should
+      be handled normally.  If present, number of cells must be less than
+      or equal to the number of AIFs. If less than the number of AIFs, for
+      cells that have not been specified the corresponding AIFs will be
+      treated as default setting.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      default: 0
+
+  wlf,spk-fmt:
+    description:
+      PDM speaker data format, must contain 2 cells (OUT5 and OUT6).  See
+      the datasheet for values.  The second cell is ignored for codecs that
+      do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  wlf,spk-mute:
+    description:
+      PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).  See
+      the datasheet for values.  The second cell is ignored for codecs that
+      do not have OUT6 (wm5102, wm8997, wm8998, wm1814)
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  wlf,out-volume-limit:
+    description:
+      The volume limit value that should be applied to each output
+      channel. See the datasheet for exact values. Channels are specified
+      in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 12
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml
new file mode 100644
index 0000000000..6d12b0ac37
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8510 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8510
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8510";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml
new file mode 100644
index 0000000000..decc395bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8523 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8523
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "wlf,wm8523";
+            reg = <0x1a>;
+        };
+    };        
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml
new file mode 100644
index 0000000000..4d951ece39
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8524.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8524.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8524 24-bit 192KHz Stereo DAC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8524
+
+  "#sound-dai-cells":
+    const: 0
+
+  wlf,mute-gpios:
+    maxItems: 1
+    description:
+      a GPIO spec for the MUTE pin.
+
+required:
+  - compatible
+  - wlf,mute-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    wm8524: codec {
+        compatible = "wlf,wm8524";
+        wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml
new file mode 100644
index 0000000000..2f27852cdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8580.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8580 and WM8581 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8580
+      - wlf,wm8581
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "wlf,wm8580";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml
new file mode 100644
index 0000000000..ecaac2818b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8711 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8711
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "wlf,wm8711";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml
new file mode 100644
index 0000000000..fc89475a05
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8728 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8728
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "wlf,wm8728";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
new file mode 100644
index 0000000000..858c0f6895
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson Microelectromics WM8731 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Wolfson Microelectronics WM8731 audio CODEC
+
+  Pins on the device (for linking into audio routes):
+    * LOUT: Left Channel Line Output
+    * ROUT: Right Channel Line Output
+    * LHPOUT: Left Channel Headphone Output
+    * RHPOUT: Right Channel Headphone Output
+    * LLINEIN: Left Channel Line Input
+    * RLINEIN: Right Channel Line Input
+    * MICIN: Microphone Input
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8731
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    description: Clock provider for MCLK pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  HPVDD-supply:
+    description: Headphone power supply regulator on the HPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+  - HPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_i2c: codec@0 {
+            compatible = "wlf,wm8731";
+            reg = <0>;
+            spi-max-frequency = <12500000>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
+  - |
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_spi: codec@1b {
+            compatible = "wlf,wm8731";
+            reg = <0x1b>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml
new file mode 100644
index 0000000000..12d8765726
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8737.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8737 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8737
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "wlf,wm8737";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml
new file mode 100644
index 0000000000..9eebe7d7f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8753.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8753 audio CODEC
+
+description: |
+  Pins on the device (for linking into audio routes):
+      * LOUT1
+      * LOUT2
+      * ROUT1
+      * ROUT2
+      * MONO1
+      * MONO2
+      * OUT3
+      * OUT4
+      * LINE1
+      * LINE2
+      * RXP
+      * RXN
+      * ACIN
+      * ACOP
+      * MIC1N
+      * MIC1
+      * MIC2N
+      * MIC2
+      * Mic Bias
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8753
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@1a {
+            compatible = "wlf,wm8753";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
new file mode 100644
index 0000000000..4cfa66f626
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8903 audio codec
+
+description: |
+  This device supports I2C only.
+  Pins on the device (for linking into audio routes):
+      * IN1L
+      * IN1R
+      * IN2L
+      * IN2R
+      * IN3L
+      * IN3R
+      * DMICDAT
+      * HPOUTL
+      * HPOUTR
+      * LINEOUTL
+      * LINEOUTR
+      * LOP
+      * LON
+      * ROP
+      * RON
+      * MICBIAS
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8903
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  micdet-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Default register value for R6 (Mic Bias).
+
+  micdet-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
+    description: The debounce delay for microphone detection in mS.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      minItems: 5
+      maxItems: 5
+      A list of GPIO configuration register values.
+      If absent, no configuration of these registers is performed.
+      If any entry has the value 0xffffffff, that GPIO's
+      configuration will not be modified.
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  CPVDD-supply:
+    description: Charge pump supply regulator on the CPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wm8903: codec@1a {
+        compatible = "wlf,wm8903";
+        reg = <0x1a>;
+        interrupts = <347>;
+
+        AVDD-supply = <&fooreg_a>;
+        CPVDD-supply = <&fooreg_b>;
+        DBVDD-supply = <&fooreg_c>;
+        DCVDD-supply = <&fooreg_d>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        micdet-cfg = <0>;
+        micdet-delay = <100>;
+        gpio-cfg = <
+          0x0600 /* DMIC_LR, output */
+          0x0680 /* DMIC_DAT, input */
+          0x0000 /* GPIO, output, low */
+          0x0200 /* Interrupt, output */
+          0x01a0 /* BCLK, input, active high */
+        >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
new file mode 100644
index 0000000000..329260cf0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8904.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8904.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8904/WM8912 audio codecs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Pins on the device (for linking into audio routes):
+  IN1L, IN1R, IN2L, IN2R, IN3L, IN3R, HPOUTL, HPOUTR, LINEOUTL, LINEOUTR,
+  MICBIAS
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8904
+      - wlf,wm8912
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  AVDD-supply: true
+  CPVDD-supply: true
+  DBVDD-supply: true
+  DCVDD-supply: true
+  MICVDD-supply: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+  - MICVDD-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8904";
+            reg = <0x1a>;
+            clocks = <&pck0>;
+            clock-names = "mclk";
+            AVDD-supply = <&reg_1p8v>;
+            CPVDD-supply = <&reg_1p8v>;
+            DBVDD-supply = <&reg_1p8v>;
+            DCVDD-supply = <&reg_1p8v>;
+            MICVDD-supply = <&reg_1p8v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml
new file mode 100644
index 0000000000..3e809217c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8940.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8940 Codec
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8940
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0x1a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
new file mode 100644
index 0000000000..62e62c335d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8960.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8960 audio codec
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8960
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    const: 0
+
+  AVDD-supply:
+    description: Analogue supply.
+
+  DBVDD-supply:
+    description: Digital Buffer Supply.
+
+  DCVDD-supply:
+    description: Digital Core Supply.
+
+  SPKVDD1-supply:
+    description: Supply for speaker drivers 1.
+
+  SPKVDD2-supply:
+    description: Supply for speaker drivers 2.
+
+  wlf,capless:
+    type: boolean
+    description:
+      If present, OUT3 pin will be enabled and disabled together with HP_L and
+      HP_R pins in response to jack detect events.
+
+  wlf,gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description: |
+      A list of GPIO configuration register values.
+       - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface)
+       - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4).
+
+  wlf,hp-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 3
+    description: |
+      A list of headphone jack detect configuration register values:
+       - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4).
+       - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2).
+       - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1).
+
+  wlf,shared-lrclk:
+    type: boolean
+    description:
+      If present, the LRCM bit of R24 (Additional control 2) gets set,
+      indicating that ADCLRC and DACLRC pins will be disabled only when ADC
+      (Left and Right) and DAC (Left and Right) are disabled.
+      When WM8960 works on synchronize mode and DACLRC pin is used to supply
+      frame clock, it will no frame clock for captrue unless enable DAC to
+      enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for
+      captrue.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@1a {
+            compatible = "wlf,wm8960";
+            reg = <0x1a>;
+            clocks = <&clks 0>;
+            clock-names = "mclk";
+            #sound-dai-cells = <0>;
+            wlf,hp-cfg = <3 2 3>;
+            wlf,gpio-cfg = <1 3>;
+            wlf,shared-lrclk;
+            DCVDD-supply = <&reg_audio>;
+            DBVDD-supply = <&reg_audio>;
+            AVDD-supply = <&reg_audio>;
+            SPKVDD1-supply = <&reg_audio>;
+            SPKVDD2-supply = <&reg_audio>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml
new file mode 100644
index 0000000000..f580785455
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8961.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8961 Ultra-Low Power Stereo CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8961
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          wm8961: codec@4a {
+                  compatible = "wlf,wm8961";
+                  reg = <0x4a>;
+                  #sound-dai-cells = <0>;
+          };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
new file mode 100644
index 0000000000..5fe0b2c9f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8962.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8962 Ultra-Low Power Stereo CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: wlf,wm8962
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  AVDD-supply:
+    description: Analogue supply.
+
+  CPVDD-supply:
+    description: Charge pump power supply.
+
+  DBVDD-supply:
+    description: Digital Buffer Supply.
+
+  DCVDD-supply:
+    description: Digital Core Supply.
+
+  MICVDD-supply:
+    description: Microphone bias amp supply.
+
+  PLLVDD-supply:
+    description: PLL Supply
+
+  SPKVDD1-supply:
+    description: Supply for left speaker drivers.
+
+  SPKVDD2-supply:
+    description: Supply for right speaker drivers.
+
+  spk-mono:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, the SPK_MONO bit of R51 (Class D Control 2) gets set,
+      indicating that the speaker is in mono mode.
+
+  mic-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Default register value for R48 (Additional Control 4).
+      If absent, the default should be the register default.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    description:
+      A list of GPIO configuration register values.  If absent, no
+      configuration of these registers is performed.  Note that only values
+      within [0x0, 0xffff] are valid.  Any other value is regarded as setting
+      the GPIO register to its reset value 0x0.
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+  - MICVDD-supply
+  - PLLVDD-supply
+  - SPKVDD1-supply
+  - SPKVDD2-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          wm8962: codec@1a {
+                  compatible = "wlf,wm8962";
+                  reg = <0x1a>;
+                  clocks = <&clks IMX6QDL_CLK_CKO>;
+                  DCVDD-supply = <&reg_audio>;
+                  DBVDD-supply = <&reg_audio>;
+                  AVDD-supply = <&reg_audio>;
+                  CPVDD-supply = <&reg_audio>;
+                  MICVDD-supply = <&reg_audio>;
+                  PLLVDD-supply = <&reg_audio>;
+                  SPKVDD1-supply = <&reg_audio>;
+                  SPKVDD2-supply = <&reg_audio>;
+                  gpio-cfg = <
+                          0x0000 /* 0:Default */
+                          0x0000 /* 1:Default */
+                          0x0013 /* 2:FN_DMICCLK */
+                          0x0000 /* 3:Default */
+                          0x8014 /* 4:FN_DMICCDAT */
+                          0x0000 /* 5:Default */
+                  >;
+          };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.txt b/Documentation/devicetree/bindings/sound/wlf,wm8974.txt
new file mode 100644
index 0000000000..01d3a7c834
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8974.txt
@@ -0,0 +1,15 @@
+WM8974 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+  - compatible: "wlf,wm8974"
+  - reg: the I2C address or SPI chip select number of the device
+
+Examples:
+
+codec: wm8974@1a {
+	compatible = "wlf,wm8974";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
new file mode 100644
index 0000000000..efb5f9f6cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8978.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8978 Codec
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8978
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8978";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8978";
+            reg = <0x1a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml
new file mode 100644
index 0000000000..8f045de028
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM1811/WM8994/WM8958 audio codecs
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - patches@opensource.cirrus.com
+
+description: |
+  These devices support both I2C and SPI (configured with pin strapping on the
+  board).
+
+  Pins on the device (for linking into audio routes):
+  IN1LN, IN1LP, IN2LN, IN2LP:VXRN, IN1RN, IN1RP, IN2RN, IN2RP:VXRP, SPKOUTLP,
+  SPKOUTLN, SPKOUTRP, SPKOUTRN, HPOUT1L, HPOUT1R, HPOUT2P, HPOUT2N, LINEOUT1P,
+  LINEOUT1N, LINEOUT2P, LINEOUT2N.
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm1811
+      - wlf,wm8994
+      - wlf,wm8958
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: MCLK1
+      - const: MCLK2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the IRQ number. The second cell is the flags, encoded
+      as the trigger masks.
+
+  AVDD1-supply: true
+  AVDD2-supply: true
+  CPVDD-supply: true
+  DBVDD-supply: true
+  DBVDD1-supply: true
+  DBVDD2-supply: true
+  DBVDD3-supply: true
+  DCVDD-supply: true
+  LDO1VDD-supply: true
+  LDO2VDD-supply: true
+  SPKVDD1-supply: true
+  SPKVDD2-supply: true
+
+  '#sound-dai-cells':
+    const: 0
+
+  wlf,gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 11
+    description:
+      A list of GPIO configuration register values. If absent, no configuration
+      of these registers is performed. If any value is over 0xffff then the
+      register will be left as default. If present 11 values must be supplied.
+
+  wlf,micbias-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description:
+      Two MICBIAS register values for WM1811 or WM8958.  If absent the register
+      defaults will be used.
+
+  wlf,ldo1ena-gpios:
+    maxItems: 1
+    description:
+      Control of LDO1ENA input to device.
+
+  wlf,ldo2ena-gpios:
+    maxItems: 1
+    description:
+      Control of LDO2ENA input to device.
+
+  wlf,lineout1-se:
+    type: boolean
+    description:
+      LINEOUT1 is in single ended mode.
+
+  wlf,lineout2-se:
+    type: boolean
+    description:
+      INEOUT2 is in single ended mode.
+
+  wlf,lineout1-feedback:
+    type: boolean
+    description:
+      LINEOUT1 has common mode feedback connected.
+
+  wlf,lineout2-feedback:
+    type: boolean
+    description:
+      LINEOUT2 has common mode feedback connected.
+
+  wlf,ldoena-always-driven:
+    type: boolean
+    description:
+      LDOENA is always driven.
+
+  wlf,spkmode-pu:
+    type: boolean
+    description:
+      Enable the internal pull-up resistor on the SPKMODE pin.
+
+  wlf,csnaddr-pd:
+    type: boolean
+    description:
+      Enable the internal pull-down resistor on the CS/ADDR pin.
+
+required:
+  - compatible
+  - reg
+  - AVDD2-supply
+  - CPVDD-supply
+  - SPKVDD1-supply
+  - SPKVDD2-supply
+
+allOf:
+  - $ref: dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - wlf,wm1811
+            - wlf,wm8958
+    then:
+      properties:
+        DBVDD-supply: false
+        LDO2VDD-supply: false
+      required:
+        - DBVDD1-supply
+        - DBVDD2-supply
+        - DBVDD3-supply
+    else:
+      properties:
+        DBVDD1-supply: false
+        DBVDD2-supply: false
+        DBVDD3-supply: false
+      required:
+        - DBVDD-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@1a {
+            compatible = "wlf,wm1811";
+            reg = <0x1a>;
+            clocks = <&i2s0 0>;
+            clock-names = "MCLK1";
+
+            AVDD2-supply = <&main_dc_reg>;
+            CPVDD-supply = <&main_dc_reg>;
+            DBVDD1-supply = <&main_dc_reg>;
+            DBVDD2-supply = <&main_dc_reg>;
+            DBVDD3-supply = <&main_dc_reg>;
+            LDO1VDD-supply = <&main_dc_reg>;
+            SPKVDD1-supply = <&main_dc_reg>;
+            SPKVDD2-supply = <&main_dc_reg>;
+
+            wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+            wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wm8741.txt b/Documentation/devicetree/bindings/sound/wm8741.txt
new file mode 100644
index 0000000000..b69e196c74
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8741.txt
@@ -0,0 +1,29 @@
+WM8741 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8741"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Optional properties:
+
+  - diff-mode: Differential output mode configuration. Default value for field
+    DIFF in register R8 (MODE_CONTROL_2). If absent, the default is 0, shall be:
+    0 = stereo
+    1 = mono left
+    2 = stereo reversed
+    3 = mono right
+
+Example:
+
+wm8741: codec@1a {
+	compatible = "wlf,wm8741";
+	reg = <0x1a>;
+
+	diff-mode = <3>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8750.yaml b/Documentation/devicetree/bindings/sound/wm8750.yaml
new file mode 100644
index 0000000000..24246ac7bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8750.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wm8750.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WM8750 and WM8987 audio CODECs
+
+description: |
+  These devices support both I2C and SPI (configured with pin strapping
+  on the board).
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8750
+      - wlf,wm8987
+
+  reg:
+    description:
+      The I2C address of the device for I2C, the chip select number for SPI
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "wlf,wm8750";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wm8770.txt b/Documentation/devicetree/bindings/sound/wm8770.txt
new file mode 100644
index 0000000000..cac762a110
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8770.txt
@@ -0,0 +1,16 @@
+WM8770 audio CODEC
+
+This device supports SPI.
+
+Required properties:
+
+  - compatible : "wlf,wm8770"
+
+  - reg : the chip select number.
+
+Example:
+
+wm8770: codec@1 {
+	compatible = "wlf,wm8770";
+	reg = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8776.txt b/Documentation/devicetree/bindings/sound/wm8776.txt
new file mode 100644
index 0000000000..01173369c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8776.txt
@@ -0,0 +1,18 @@
+WM8776 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8776"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+wm8776: codec@1a {
+	compatible = "wlf,wm8776";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8782.txt b/Documentation/devicetree/bindings/sound/wm8782.txt
new file mode 100644
index 0000000000..256cdec6ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8782.txt
@@ -0,0 +1,17 @@
+WM8782 stereo ADC
+
+This device does not have any control interface or reset pins.
+
+Required properties:
+
+ - compatible  : "wlf,wm8782"
+ - Vdda-supply : phandle to a regulator for the analog power supply (2.7V - 5.5V)
+ - Vdd-supply  : phandle to a regulator for the digital power supply (2.7V - 3.6V)
+
+Example:
+
+wm8782: stereo-adc {
+	compatible = "wlf,wm8782";
+	Vdda-supply = <&vdda_supply>;
+	Vdd-supply = <&vdd_supply>;
+};
diff --git a/Documentation/devicetree/bindings/sound/wm8804.txt b/Documentation/devicetree/bindings/sound/wm8804.txt
new file mode 100644
index 0000000000..2c1641c17a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8804.txt
@@ -0,0 +1,25 @@
+WM8804 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8804"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+  - PVDD-supply, DVDD-supply : Power supplies for the device, as covered
+    in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - wlf,reset-gpio: A GPIO specifier for the GPIO controlling the reset pin
+
+Example:
+
+wm8804: codec@1a {
+	compatible = "wlf,wm8804";
+	reg = <0x1a>;
+};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
new file mode 100644
index 0000000000..cbc93c8f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for Xilinx PL audio formatter
+
+The IP core supports DMA, data formatting(AES<->PCM conversion)
+of audio samples.
+
+Required properties:
+ - compatible: "xlnx,audio-formatter-1.0"
+ - interrupt-names: Names specified to list of interrupts in same
+		    order mentioned under "interrupts".
+		    List of supported interrupt names are:
+		    "irq_mm2s" : interrupt from MM2S block
+		    "irq_s2mm" : interrupt from S2MM block
+ - interrupts-parent: Phandle for interrupt controller.
+ - interrupts: List of Interrupt numbers.
+ - reg: Base address and size of the IP core instance.
+ - clock-names: List of input clocks.
+   Required elements: "s_axi_lite_aclk", "aud_mclk"
+ - clocks: Input clock specifier. Refer to common clock bindings.
+
+Example:
+	audio_ss_0_audio_formatter_0: audio_formatter@80010000 {
+		compatible = "xlnx,audio-formatter-1.0";
+		interrupt-names = "irq_mm2s", "irq_s2mm";
+		interrupt-parent = <&gic>;
+		interrupts = <0 104 4>, <0 105 4>;
+		reg = <0x0 0x80010000 0x0 0x1000>;
+		clock-names = "s_axi_lite_aclk", "aud_mclk";
+		clocks = <&clk 71>, <&clk_wiz_1 0>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,i2s.txt b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt
new file mode 100644
index 0000000000..5e7c7d5bb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt
@@ -0,0 +1,28 @@
+Device-Tree bindings for Xilinx I2S PL block
+
+The IP supports I2S based playback/capture audio
+
+Required property:
+ - compatible: "xlnx,i2s-transmitter-1.0" for playback and
+	       "xlnx,i2s-receiver-1.0" for capture
+
+Required property common to both I2S playback and capture:
+ - reg: Base address and size of the IP core instance.
+ - xlnx,dwidth: sample data width. Can be any of 16, 24.
+ - xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4.
+		      supported channels = 2 * xlnx,num-channels
+
+Example:
+
+	i2s_receiver@a0080000 {
+		compatible = "xlnx,i2s-receiver-1.0";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+		xlnx,dwidth = <0x18>;
+		xlnx,num-channels = <1>;
+	};
+	i2s_transmitter@a0090000 {
+		compatible = "xlnx,i2s-transmitter-1.0";
+		reg = <0x0 0xa0090000 0x0 0x10000>;
+		xlnx,dwidth = <0x18>;
+		xlnx,num-channels = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,spdif.txt b/Documentation/devicetree/bindings/sound/xlnx,spdif.txt
new file mode 100644
index 0000000000..15c2d64d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,spdif.txt
@@ -0,0 +1,28 @@
+Device-Tree bindings for Xilinx SPDIF IP
+
+The IP supports playback and capture of SPDIF audio
+
+Required properties:
+ - compatible: "xlnx,spdif-2.0"
+ - clock-names: List of input clocks.
+   Required elements: "s_axi_aclk", "aud_clk_i"
+ - clocks: Input clock specifier. Refer to common clock bindings.
+ - reg: Base address and address length of the IP core instance.
+ - interrupts-parent: Phandle for interrupt controller.
+ - interrupts: List of Interrupt numbers.
+ - xlnx,spdif-mode: 0 :- receiver mode
+		    1 :- transmitter mode
+ - xlnx,aud_clk_i: input audio clock value.
+
+Example:
+	spdif_0: spdif@80010000 {
+		clock-names = "aud_clk_i", "s_axi_aclk";
+		clocks = <&misc_clk_0>, <&clk 71>;
+		compatible = "xlnx,spdif-2.0";
+		interrupt-names = "spdif_interrupt";
+		interrupt-parent = <&gic>;
+		interrupts = <0 91 4>;
+		reg = <0x0 0x80010000 0x0 0x10000>;
+		xlnx,spdif-mode = <1>;
+		xlnx,aud_clk_i = <49152913>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml
new file mode 100644
index 0000000000..8bd201e573
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/zl38060.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/zl38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ZL38060 Connected Home Audio Processor from Microsemi.
+
+description: |
+  The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
+  which consists of a Digital Signal Processor (DSP), several Digital
+  Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
+
+maintainers:
+  - Jaroslav Kysela <perex@perex.cz>
+  - Takashi Iwai <tiwai@suse.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    const: mscc,zl38060
+
+  reg:
+    description:
+      SPI device address.
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW (see ../gpio/gpio.txt)
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - '#sound-dai-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec: zl38060@0 {
+            gpio-controller;
+            #gpio-cells = <2>;
+            #sound-dai-cells = <0>;
+            compatible = "mscc,zl38060";
+            reg = <0>;
+            spi-max-frequency = <12000000>;
+            reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
new file mode 100644
index 0000000000..7d60a96549
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
+
+description:
+  The Qualcomm SoundWire controller along with its board specific bus parameters.
+
+properties:
+  compatible:
+    enum:
+      - qcom,soundwire-v1.3.0
+      - qcom,soundwire-v1.5.0
+      - qcom,soundwire-v1.5.1
+      - qcom,soundwire-v1.6.0
+      - qcom,soundwire-v1.7.0
+      - qcom,soundwire-v2.0.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: specify the SoundWire controller core.
+      - description: specify the Soundwire controller wake IRQ.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: wakeup
+
+  clocks:
+    items:
+      - description: iface clock
+
+  clock-names:
+    items:
+      - const: iface
+
+  resets:
+    items:
+      - description: SWR_AUDIO_CGCR RESET
+
+  reset-names:
+    items:
+      - const: swr_audio_cgcr
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+  wakeup-source: true
+
+  qcom,din-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data in ports
+
+  qcom,dout-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data out ports
+
+  qcom,ports-word-length:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Size of payload channel sample.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
+  qcom,ports-sinterval-low:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Sample interval (only lowest byte) of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
+  qcom,ports-sinterval:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description:
+      Sample interval of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xffff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
+  qcom,ports-offset1:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Payload transport window offset1 of each data port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
+  qcom,ports-offset2:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Payload transport window offset2 of each data port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
+  qcom,ports-lane-control:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identify which data lane the data port uses.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+
+  qcom,ports-block-pack-mode:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Indicate the block packing mode.
+      0 to indicate Blocks are per Channel
+      1 to indicate Blocks are per Port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 1
+        - const: 0xff
+
+  qcom,ports-hstart:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identifying lowerst numbered column in SoundWire Frame,
+      i.e. left edge of the Transport sub-frame for each port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 15
+        - const: 0xff
+
+  qcom,ports-hstop:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identifying highest numbered column in SoundWire Frame,
+      i.e. the right edge of the Transport
+      sub-frame for each port. Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 15
+        - const: 0xff
+
+  qcom,ports-block-group-count:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      In range 1 to 4 to indicate how many sample intervals are combined
+      into a payload. Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 16
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 4
+        - const: 0xff
+
+  label:
+    maxItems: 1
+
+patternProperties:
+  "^.*@[0-9a-f],[0-9a-f]$":
+    type: object
+    additionalProperties: true
+    description:
+      Child nodes for a standalone audio codec or speaker amplifier IC.
+      It has RX and TX Soundwire secondary devices.
+    properties:
+      compatible:
+        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+  - '#address-cells'
+  - '#size-cells'
+  - qcom,dout-ports
+  - qcom,din-ports
+  - qcom,ports-offset1
+  - qcom,ports-offset2
+
+oneOf:
+  - required:
+      - qcom,ports-sinterval-low
+  - required:
+      - qcom,ports-sinterval
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+
+    soundwire@3210000 {
+        compatible = "qcom,soundwire-v1.6.0";
+        reg = <0x03210000 0x2000>;
+
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                     <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-names = "core", "wakeup";
+
+        clocks = <&lpass_rx_macro>;
+        clock-names = "iface";
+
+        qcom,din-ports = <0>;
+        qcom,dout-ports = <5>;
+
+        resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+        reset-names = "swr_audio_cgcr";
+
+        qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+        qcom,ports-sinterval-low =      /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+        qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+        qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+        qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+        qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+        qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+        qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+        qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+        #sound-dai-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
new file mode 100644
index 0000000000..fdeb8af417
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/soundwire-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SoundWire Controller Common Properties
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  SoundWire busses can be described with a node for the SoundWire controller
+  device and a set of child nodes for each SoundWire slave on the bus.
+
+properties:
+  $nodename:
+    pattern: "^soundwire(@.*)?$"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f],[0-9a-f]$":
+    type: object
+
+    properties:
+      compatible:
+        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+        description: Is the textual representation of SoundWire Enumeration
+          address. compatible string should contain SoundWire Version ID,
+          Manufacturer ID, Part ID and Class ID in order and shall be in
+          lower-case hexadecimal with leading zeroes.
+          Valid sizes of these fields are
+          Version ID is 1 nibble, number '0x1' represents SoundWire 1.0
+          and '0x2' represents SoundWire 1.1 and so on.
+          MFD is 4 nibbles
+          PID is 4 nibbles
+          CID is 2 nibbles
+          More Information on detail of encoding of these fields can be
+          found in MIPI Alliance DisCo & SoundWire 1.0 Specifications.
+
+      reg:
+        maxItems: 1
+        description:
+          Link ID followed by Instance ID of SoundWire Device Address.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    soundwire@c2d0000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0c2d0000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217201000";
+            reg = <0 1>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217201000";
+            reg = <0 2>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt
new file mode 100644
index 0000000000..8a18d71e68
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/adi,axi-spi-engine.txt
@@ -0,0 +1,31 @@
+Analog Devices AXI SPI Engine controller Device Tree Bindings
+
+Required properties:
+- compatible		: Must be "adi,axi-spi-engine-1.00.a""
+- reg			: Physical base address and size of the register map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- clock-names		: List of input clock names - "s_axi_aclk", "spi_clk"
+- clocks		: Clock phandles and specifiers (See clock bindings for
+			  details on clock-names and clocks).
+- #address-cells	: Must be <1>
+- #size-cells		: Must be <0>
+
+Optional subnodes:
+	Subnodes are use to represent the SPI slave devices connected to the SPI
+	master. They follow the generic SPI bindings as outlined in spi-bus.txt.
+
+Example:
+
+    spi@@44a00000 {
+		compatible = "adi,axi-spi-engine-1.00.a";
+		reg = <0x44a00000 0x1000>;
+		interrupts = <0 56 4>;
+		clocks = <&clkc 15 &clkc 15>;
+		clock-names = "s_axi_aclk", "spi_clk";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* SPI devices */
+    };
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
new file mode 100644
index 0000000000..a6f34bdd1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 SPI Controller
+
+allOf:
+  - $ref: spi-controller.yaml
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+patternProperties:
+  "^.*@[0-9a-f]+":
+    type: object
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 4
+
+      spi-rx-bus-width:
+        const: 1
+
+      spi-tx-bus-width:
+        const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi1: spi@1c06000 {
+        compatible = "allwinner,sun4i-a10-spi";
+        reg = <0x01c06000 0x1000>;
+        interrupts = <11>;
+        clocks = <&ahb_gates 21>, <&spi1_clk>;
+        clock-names = "ahb", "mod";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
new file mode 100644
index 0000000000..28b8ace630
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 SPI Controller
+
+allOf:
+  - $ref: spi-controller.yaml
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun50i-r329-spi
+      - const: allwinner,sun6i-a31-spi
+      - const: allwinner,sun8i-h3-spi
+      - items:
+          - enum:
+              - allwinner,sun8i-r40-spi
+              - allwinner,sun50i-h6-spi
+              - allwinner,sun50i-h616-spi
+              - allwinner,suniv-f1c100s-spi
+          - const: allwinner,sun8i-h3-spi
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-spi
+              - allwinner,sun50i-r329-spi-dbi
+          - const: allwinner,sun50i-r329-spi
+      - items:
+          - const: allwinner,sun20i-d1-spi-dbi
+          - const: allwinner,sun50i-r329-spi-dbi
+          - const: allwinner,sun50i-r329-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+patternProperties:
+  "^.*@[0-9a-f]+":
+    type: object
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 4
+
+      spi-rx-bus-width:
+        const: 1
+
+      spi-tx-bus-width:
+        const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi1: spi@1c69000 {
+        compatible = "allwinner,sun6i-a31-spi";
+        reg = <0x01c69000 0x1000>;
+        interrupts = <0 66 4>;
+        clocks = <&ahb1_gates 21>, <&spi1_clk>;
+        clock-names = "ahb", "mod";
+        resets = <&ahb1_rst 21>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+  - |
+    spi0: spi@1c68000 {
+        compatible = "allwinner,sun8i-h3-spi";
+        reg = <0x01c68000 0x1000>;
+        interrupts = <0 65 4>;
+        clocks = <&ccu 30>, <&ccu 82>;
+        clock-names = "ahb", "mod";
+        dmas = <&dma 23>, <&dma 23>;
+        dma-names = "rx", "tx";
+        resets = <&ccu 15>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml
new file mode 100644
index 0000000000..ea47d30eef
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/amlogic,a1-spifc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/amlogic,a1-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic A1 SPI Flash Controller
+
+maintainers:
+  - Martin Kurbanov <mmkurbanov@sberdevices.ru>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,a1-spifc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@fd000400 {
+        compatible = "amlogic,a1-spifc";
+        reg = <0xfd000400 0x290>;
+        clocks = <&clkc_clkid_spifc>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
new file mode 100644
index 0000000000..4e28e6e9d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/amlogic,meson-gx-spicc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SPI Communication Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Meson SPICC is a generic SPI controller for general purpose Full-Duplex
+  communications with dedicated 16 words RX/TX PIO FIFOs.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gx-spicc # SPICC controller on Amlogic GX and compatible SoCs
+      - amlogic,meson-axg-spicc # SPICC controller on Amlogic AXG and compatible SoCs
+      - amlogic,meson-g12a-spicc # SPICC controller on Amlogic G12A and compatible SoCs
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: controller register bus clock
+      - description: baud rate generator and delay control clock
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-g12a-spicc
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: core
+            - const: pclk
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-gx-spicc
+
+    then:
+      properties:
+        pinctrl-0: true
+        pinctrl-1: true
+        pinctrl-2: true
+
+        pinctrl-names:
+          minItems: 1
+          items:
+            - const: default
+            - const: idle-high
+            - const: idle-low
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@c1108d80 {
+        compatible = "amlogic,meson-gx-spicc";
+        reg = <0xc1108d80 0x80>;
+        interrupts = <112>;
+        clocks = <&clk81>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <1000000>;
+            reg = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
new file mode 100644
index 0000000000..8e769ccda9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/amlogic,meson6-spifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SPI Flash Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+description: |
+  The Meson SPIFC is a controller optimized for communication with SPI
+  NOR memories, without DMA support and a 64-byte unified transmit /
+  receive buffer.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-spifc # SPI Flash Controller on Meson6 and compatible SoCs
+      - amlogic,meson-gxbb-spifc # SPI Flash Controller on GXBB and compatible SoCs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@c1108c80 {
+        compatible = "amlogic,meson6-spifc";
+        reg = <0xc1108c80 0x80>;
+        clocks = <&clk81>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash: flash@0 {
+            compatible = "spansion,m25p80", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
new file mode 100644
index 0000000000..57d932af45
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SMC controllers
+
+maintainers:
+  - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
+  - Cédric Le Goater <clg@kaod.org>
+
+description: |
+  This binding describes the Aspeed Static Memory Controllers (FMC and
+  SPI) of the AST2400, AST2500 and AST2600 SOCs.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fmc
+      - aspeed,ast2600-spi
+      - aspeed,ast2500-fmc
+      - aspeed,ast2500-spi
+      - aspeed,ast2400-fmc
+      - aspeed,ast2400-spi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    spi@1e620000 {
+        reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "aspeed,ast2600-fmc";
+        clocks = <&syscon ASPEED_CLK_AHB>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+
+        flash@0 {
+            reg = < 0 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
+        };
+
+        flash@1 {
+            reg = < 1 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
+        };
+
+        flash@2 {
+            reg = < 2 >;
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            spi-rx-bus-width = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
new file mode 100644
index 0000000000..58367587bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,at91rm9200-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SPI device
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,at91rm9200-spi
+      - items:
+          - const: microchip,sam9x60-spi
+          - const: atmel,at91rm9200-spi
+      - items:
+          - const: microchip,sam9x7-spi
+          - const: microchip,sam9x60-spi
+          - const: atmel,at91rm9200-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    contains:
+      const: spi_clk
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for FIFO
+      capable SPI controllers.
+    enum: [ 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi1: spi@fffcc000 {
+        compatible = "atmel,at91rm9200-spi";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&spi1_clk>;
+        clock-names = "spi_clk";
+        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+        atmel,fifo-size = <32>;
+
+        mmc@0 {
+            compatible = "mmc-spi-slot";
+            reg = <0>;
+            gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;    /* CD */
+            spi-max-frequency = <25000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml
new file mode 100644
index 0000000000..b0d99bc105
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/atmel,quadspi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,quadspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d2-qspi
+      - microchip,sam9x60-qspi
+      - microchip,sama7g5-qspi
+      - microchip,sama7g5-ospi
+
+  reg:
+    items:
+      - description: base registers
+      - description: mapped memory
+
+  reg-names:
+    items:
+      - const: qspi_base
+      - const: qspi_mmap
+
+  clocks:
+    minItems: 1
+    items:
+      - description: peripheral clock
+      - description: system clock or generic clock, if available
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - enum: [ qspick, gclk ]
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    spi@f0020000 {
+        compatible = "atmel,sama5d2-qspi";
+        reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
+        reg-names = "qspi_base", "qspi_mmap";
+        interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+        clock-names = "pclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spi0_default>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            reg = <0>;
+            spi-rx-bus-width = <4>;
+            spi-tx-bus-width = <4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
new file mode 100644
index 0000000000..d7668f41b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
@@ -0,0 +1,38 @@
+Broadcom BCM2835 auxiliary SPI1/2 controller
+
+The BCM2835 contains two forms of SPI master controller, one known simply as
+SPI0, and the other known as the "Universal SPI Master"; part of the
+auxiliary block. This binding applies to the SPI1/2 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux-spi".
+- reg: Should contain register location and length for the spi block
+- interrupts: Should contain shared interrupt of the aux block
+- clocks: The clock feeding the SPI controller - needs to
+	  point to the auxiliary clock driver of the bcm2835,
+	  as this clock will enable the output gate for the specific
+	  clock.
+- cs-gpios: the cs-gpios (native cs is NOT supported)
+	    see also spi-bus.txt
+
+Example:
+
+spi1@7e215080 {
+	compatible = "brcm,bcm2835-aux-spi";
+	reg = <0x7e215080 0x40>;
+	interrupts = <1 29>;
+	clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
+};
+
+spi2@7e2150c0 {
+	compatible = "brcm,bcm2835-aux-spi";
+	reg = <0x7e2150c0 0x40>;
+	interrupts = <1 29>;
+	clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>;
+};
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
new file mode 100644
index 0000000000..3d55dd64b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
@@ -0,0 +1,23 @@
+Broadcom BCM2835 SPI0 controller
+
+The BCM2835 contains two forms of SPI master controller, one known simply as
+SPI0, and the other known as the "Universal SPI Master"; part of the
+auxiliary block. This binding applies to the SPI0 controller.
+
+Required properties:
+- compatible: Should be one of "brcm,bcm2835-spi" for BCM2835/2836/2837 or
+  "brcm,bcm2711-spi" for BCM2711 or "brcm,bcm7211-spi" for BCM7211.
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks: The clock feeding the SPI controller.
+
+Example:
+
+spi@20204000 {
+	compatible = "brcm,bcm2835-spi";
+	reg = <0x7e204000 0x1000>;
+	interrupts = <2 22>;
+	clocks = <&clk_spi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
new file mode 100644
index 0000000000..6554978583
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-hsspi.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC High Speed SPI controller
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |
+  Broadcom Broadband SoC supports High Speed SPI master controller since the
+  early MIPS based chips such as BCM6328 and BCM63268.  This initial rev 1.0
+  controller was carried over to recent ARM based chips, such as BCM63138,
+  BCM4908 and BCM6858. The old MIPS based chip should continue to use the
+  brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
+  use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
+  defined below to match the specific chip along with ip revision info.
+
+  This rev 1.0 controller has a limitation that can not keep the chip select line
+  active between the SPI transfers within the same SPI message. This can
+  terminate the transaction to some SPI devices prematurely. The issue can be
+  worked around by either the controller's prepend mode or using the dummy chip
+  select workaround. Driver automatically picks the suitable mode based on
+  transfer type so it is transparent to the user.
+
+  The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
+  controller rev 1.1 that add the capability to allow the driver to control chip
+  select explicitly. This solves the issue in the old controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm6328-hsspi
+      - items:
+          - enum:
+              - brcm,bcm47622-hsspi
+              - brcm,bcm4908-hsspi
+              - brcm,bcm63138-hsspi
+              - brcm,bcm63146-hsspi
+              - brcm,bcm63148-hsspi
+              - brcm,bcm63158-hsspi
+              - brcm,bcm63178-hsspi
+              - brcm,bcm6846-hsspi
+              - brcm,bcm6856-hsspi
+              - brcm,bcm6858-hsspi
+              - brcm,bcm6878-hsspi
+          - const: brcm,bcmbca-hsspi-v1.0
+      - items:
+          - enum:
+              - brcm,bcm4912-hsspi
+              - brcm,bcm6756-hsspi
+              - brcm,bcm6813-hsspi
+              - brcm,bcm6855-hsspi
+          - const: brcm,bcmbca-hsspi-v1.1
+
+  reg:
+    items:
+      - description: main registers
+      - description: miscellaneous control registers
+    minItems: 1
+
+  reg-names:
+    items:
+      - const: hsspi
+      - const: spim-ctrl
+    minItems: 1
+
+  clocks:
+    items:
+      - description: SPI master reference clock
+      - description: SPI master pll clock
+
+  clock-names:
+    items:
+      - const: hsspi
+      - const: pll
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm6328-hsspi
+              - brcm,bcmbca-hsspi-v1.0
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+      required:
+        - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spi@ff801000 {
+        compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+        reg = <0xff801000 0x1000>,
+              <0xff802610 0x4>;
+        reg-names = "hsspi", "spim-ctrl";
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&hsspi>, <&hsspi_pll>;
+        clock-names = "hsspi", "pll";
+        num-cs = <8>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml
new file mode 100644
index 0000000000..fa03cdd68e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6348/BCM6358 SPI controller
+
+maintainers:
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |
+  Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband
+  SoCs.
+
+  This controller has a limitation that can not keep the chip select line active
+  between the SPI transfers within the same SPI message. This can terminate the
+  transaction to some SPI devices prematurely. The issue can be worked around by
+  the controller's prepend mode.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm6368-spi
+              - brcm,bcm6362-spi
+              - brcm,bcm63268-spi
+          - const: brcm,bcm6358-spi
+      - enum:
+          - brcm,bcm6348-spi
+          - brcm,bcm6358-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI master reference clock
+
+  clock-names:
+    items:
+      - const: spi
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@10000800 {
+        compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
+        reg = <0x10000800 0x70c>;
+        interrupts = <1>;
+        clocks = <&clkctl 9>;
+        clock-names = "spi";
+        num-cs = <5>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
new file mode 100644
index 0000000000..45975f40d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/brcm,spi-bcm-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SPI controller
+
+maintainers:
+  - Kamal Dasu <kdasu.kdev@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  The Broadcom SPI controller is a SPI master found on various SOCs, including
+  BRCMSTB (BCM7XXX), Cygnus, NSP and NS2. The Broadcom Master SPI hw IP consists
+  of:
+    MSPI : SPI master controller can read and write to a SPI slave device
+    BSPI : Broadcom SPI in combination with the MSPI hw IP provides acceleration
+           for flash reads and be configured to do single, double, quad lane
+           io with 3-byte and 4-byte addressing support.
+
+  Supported Broadcom SoCs have one instance of MSPI+BSPI controller IP.
+  MSPI master can be used without BSPI. BRCMSTB SoCs have an additional instance
+  of a MSPI master without the BSPI to use with non flash slave devices that
+  use SPI protocol.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Second Instance of MSPI BRCMSTB SoCs
+        items:
+          - enum:
+              - brcm,spi-bcm7425-qspi
+              - brcm,spi-bcm7429-qspi
+              - brcm,spi-bcm7435-qspi
+              - brcm,spi-bcm7445-qspi
+              - brcm,spi-bcm7216-qspi
+              - brcm,spi-bcm7278-qspi
+          - const: brcm,spi-bcm-qspi
+          - const: brcm,spi-brcmstb-mspi
+      - description: Second Instance of MSPI BRCMSTB SoCs
+        items:
+          - enum:
+              - brcm,spi-brcmstb-qspi
+              - brcm,spi-brcmstb-mspi
+              - brcm,spi-nsp-qspi
+              - brcm,spi-ns2-qspi
+          - const: brcm,spi-bcm-qspi
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mspi
+      - const: bspi
+      - enum: [ intr_regs, intr_status_reg, cs_reg ]
+      - enum: [ intr_regs, intr_status_reg, cs_reg ]
+      - enum: [ intr_regs, intr_status_reg, cs_reg ]
+
+  interrupts:
+    minItems: 1
+    maxItems: 7
+
+  interrupt-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: mspi_done
+          - const: mspi_halted
+          - const: spi_lr_fullness_reached
+          - const: spi_lr_session_aborted
+          - const: spi_lr_impatient
+          - const: spi_lr_session_done
+          - const: spi_lr_overread
+      - const: spi_l1_intr
+
+  clocks:
+    maxItems: 1
+    description: reference clock for this block
+
+  native-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Defined when using BE SoC and device uses BE register read/write
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+examples:
+  - | # BRCMSTB SoC: SPI Master (MSPI+BSPI) for SPI-NOR access
+    spi@f03e3400 {
+        compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
+        reg = <0xf03e3400 0x188>, <0xf03e3200 0x50>, <0xf03e0920 0x4>;
+        reg-names = "mspi", "bspi", "cs_reg";
+        interrupts = <0x5>, <0x6>, <0x1>, <0x2>, <0x3>, <0x4>, <0x0>;
+        interrupt-parent = <&gic>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done",
+                          "spi_lr_overread";
+        clocks = <&hif_spi>;
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        flash@0 {
+            #size-cells = <0x2>;
+            #address-cells = <0x2>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <0x2625a00>;
+            spi-cpol;
+            spi-cpha;
+        };
+    };
+  - | # BRCMSTB SoC: MSPI master for any SPI device
+    spi@f0416000 {
+        clocks = <&upg_fixed>;
+        compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
+        reg = <0xf0416000 0x180>;
+        reg-names = "mspi";
+        interrupts = <0x14>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupt-names = "mspi_done";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+  - | # iProc SoC
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@18027200 {
+        compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x18027200 0x184>,
+              <0x18027000 0x124>,
+              <0x1811c408 0x004>,
+              <0x180273a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mspi_done",
+                          "mspi_halted",
+                          "spi_lr_fullness_reached",
+                          "spi_lr_session_aborted",
+                          "spi_lr_impatient",
+                          "spi_lr_session_done";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+  - | # NS2 SoC
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@66470200 {
+        compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+        reg = <0x66470200 0x184>,
+              <0x66470000 0x124>,
+              <0x67017408 0x004>,
+              <0x664703a0 0x01c>;
+        reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+        interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "spi_l1_intr";
+        clocks = <&iprocmed>;
+        num-cs = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            compatible = "m25p80";
+            reg = <0x0>;
+            spi-max-frequency = <12500000>;
+            spi-cpol;
+            spi-cpha;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
new file mode 100644
index 0000000000..510b82c177
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,qspi-nor-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for the Cadence QSPI controller.
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+maintainers:
+  - Vaishnav Achath <vaishnav.a@ti.com>
+
+properties:
+  # cdns,qspi-nor.yaml
+  cdns,read-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay for read capture logic, in clock cycles.
+
+  cdns,tshsl-ns:
+    description:
+      Delay in nanoseconds for the length that the master mode chip select
+      outputs are de-asserted between transactions.
+
+  cdns,tsd2d-ns:
+    description:
+      Delay in nanoseconds between one chip select being de-activated
+      and the activation of another.
+
+  cdns,tchsh-ns:
+    description:
+      Delay in nanoseconds between last bit of current transaction and
+      deasserting the device chip select (qspi_n_ss_out).
+
+  cdns,tslch-ns:
+    description:
+      Delay in nanoseconds between setting qspi_n_ss_out low and
+      first bit transfer.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
new file mode 100644
index 0000000000..cca81f89e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Quad SPI controller
+
+maintainers:
+  - Vaishnav Achath <vaishnav.a@ti.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: xlnx,versal-ospi-1.0
+    then:
+      required:
+        - power-domains
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-qspi
+    then:
+      properties:
+        resets:
+          minItems: 2
+          maxItems: 3
+
+        reset-names:
+          minItems: 2
+          maxItems: 3
+          items:
+            enum: [ qspi, qspi-ocp, rstc_ref ]
+
+    else:
+      properties:
+        resets:
+          maxItems: 2
+
+        reset-names:
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ qspi, qspi-ocp ]
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amd,pensando-elba-qspi
+    then:
+      properties:
+        cdns,fifo-depth:
+          enum: [ 128, 256, 1024 ]
+          default: 1024
+    else:
+      properties:
+        cdns,fifo-depth:
+          enum: [ 128, 256 ]
+          default: 128
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amd,pensando-elba-qspi
+              - ti,k2g-qspi
+              - ti,am654-ospi
+              - intel,lgm-qspi
+              - xlnx,versal-ospi-1.0
+              - intel,socfpga-qspi
+              - starfive,jh7110-qspi
+          - const: cdns,qspi-nor
+      - const: cdns,qspi-nor
+
+  reg:
+    items:
+      - description: the controller register set
+      - description: the controller data area
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: ref
+      - items:
+          - const: ref
+          - const: ahb
+          - const: apb
+
+  cdns,fifo-depth:
+    description:
+      Size of the data FIFO in words.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  cdns,fifo-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bus width of the data FIFO in bytes.
+    default: 4
+
+  cdns,trigger-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      32-bit indirect AHB trigger address.
+
+  cdns,is-decoded-cs:
+    type: boolean
+    description:
+      Flag to indicate whether decoder is used to select different chip select
+      for different memory regions.
+
+  cdns,rclk-en:
+    type: boolean
+    description:
+      Flag to indicate that QSPI return clock is used to latch the read
+      data rather than the QSPI clock. Make sure that QSPI return clock
+      is populated on the board before using this property.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 2
+    maxItems: 3
+
+  reset-names:
+    minItems: 2
+    maxItems: 3
+    items:
+      enum: [ qspi, qspi-ocp, rstc_ref ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - cdns,fifo-depth
+  - cdns,fifo-width
+  - cdns,trigger-address
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    qspi: spi@ff705000 {
+        compatible = "cdns,qspi-nor";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xff705000 0x1000>,
+              <0xffa00000 0x1000>;
+        interrupts = <0 151 4>;
+        clocks = <&qspi_clk>;
+        cdns,fifo-depth = <128>;
+        cdns,fifo-width = <4>;
+        cdns,trigger-address = <0x00000000>;
+        resets = <&rst 0x1>, <&rst 0x2>;
+        reset-names = "qspi", "qspi-ocp";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0x0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
new file mode 100644
index 0000000000..eb0f924681
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020-21 Cadence
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence XSPI Controller
+
+maintainers:
+  - Parshuram Thombare <pthombar@cadence.com>
+
+description: |
+  The XSPI controller allows SPI protocol communication in
+  single, dual, quad or octal wire transmission modes for
+  read/write access to slaves such as SPI-NOR flash.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: cdns,xspi-nor
+
+  reg:
+    items:
+      - description: address and length of the controller register set
+      - description: address and length of the Slave DMA data port
+      - description: address and length of the auxiliary registers
+
+  reg-names:
+    items:
+      - const: io
+      - const: sdma
+      - const: aux
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xspi: spi@a0010000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "cdns,xspi-nor";
+            reg = <0x0 0xa0010000 0x0 0x1040>,
+                  <0x0 0xb0000000 0x0 0x1000>,
+                  <0x0 0xa0020000 0x0 0x100>;
+            reg-names = "io", "sdma", "aux";
+            interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-parent = <&gic>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <75000000>;
+                reg = <0>;
+            };
+
+            flash@1 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <75000000>;
+                reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
new file mode 100644
index 0000000000..f2dd20370d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl,spi-fsl-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Quad Serial Peripheral Interface (QuadSPI)
+
+maintainers:
+  - Han Xu <han.xu@nxp.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-qspi
+          - fsl,imx6sx-qspi
+          - fsl,imx7d-qspi
+          - fsl,imx6ul-qspi
+          - fsl,ls1021a-qspi
+          - fsl,ls2080a-qspi
+      - items:
+          - enum:
+              - fsl,ls1043a-qspi
+          - const: fsl,ls1021a-qspi
+      - items:
+          - enum:
+              - fsl,imx8mq-qspi
+          - const: fsl,imx7d-qspi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  reg-names:
+    items:
+      - const: QuadSPI
+      - const: QuadSPI-memory
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI qspi_en clock
+      - description: SoC SPI qspi clock
+
+  clock-names:
+    items:
+      - const: qspi_en
+      - const: qspi
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        spi@1550000 {
+            compatible = "fsl,ls1021a-qspi";
+            reg = <0x0 0x1550000 0x0 0x100000>,
+                  <0x0 0x40000000 0x0 0x10000000>;
+            reg-names = "QuadSPI", "QuadSPI-memory";
+            interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>,
+                     <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>;
+            clock-names = "qspi_en", "qspi";
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                reg = <0>;
+                spi-rx-bus-width = <4>;
+                spi-tx-bus-width = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
new file mode 100644
index 0000000000..14cac0e6e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-cspi
+      - const: fsl,imx21-cspi
+      - const: fsl,imx27-cspi
+      - const: fsl,imx31-cspi
+      - const: fsl,imx35-cspi
+      - const: fsl,imx51-ecspi
+      - const: fsl,imx53-ecspi
+      - items:
+          - enum:
+              - fsl,imx25-cspi
+              - fsl,imx50-cspi
+              - fsl,imx51-cspi
+              - fsl,imx53-cspi
+          - const: fsl,imx35-cspi
+      - items:
+          - const: fsl,imx8mp-ecspi
+          - const: fsl,imx6ul-ecspi
+      - items:
+          - enum:
+              - fsl,imx50-ecspi
+              - fsl,imx6q-ecspi
+              - fsl,imx6sx-ecspi
+              - fsl,imx6sl-ecspi
+              - fsl,imx6sll-ecspi
+              - fsl,imx6ul-ecspi
+              - fsl,imx7d-ecspi
+              - fsl,imx8mq-ecspi
+              - fsl,imx8mm-ecspi
+              - fsl,imx8mn-ecspi
+          - const: fsl,imx51-ecspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI ipg clock
+      - description: SoC SPI per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  fsl,spi-rdy-drctl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Integer, representing the value of DRCTL, the register controlling
+      the SPI_READY handling. Note that to enable the DRCTL consideration,
+      the SPI_READY mode-flag needs to be set too.
+      Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    spi@70010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx51-ecspi";
+        reg = <0x70010000 0x4000>;
+        interrupts = <36>;
+        clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+                 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/spi/fsl-spi.txt b/Documentation/devicetree/bindings/spi/fsl-spi.txt
new file mode 100644
index 0000000000..0654380eb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl-spi.txt
@@ -0,0 +1,62 @@
+* SPI (Serial Peripheral Interface)
+
+Required properties:
+- cell-index : QE SPI subblock index.
+		0: QE subblock SPI1
+		1: QE subblock SPI2
+- compatible : should be "fsl,spi" or "aeroflexgaisler,spictrl".
+- mode : the SPI operation mode, it can be "cpu" or "cpu-qe".
+- reg : Offset and length of the register set for the device
+- interrupts : <a b> where a is the interrupt number and b is a
+  field that represents an encoding of the sense and level
+  information for the interrupt.  This should be encoded based on
+  the information in section 2) depending on the type of interrupt
+  controller you have.
+- clock-frequency : input clock frequency to non FSL_SOC cores
+
+Optional properties:
+- cs-gpios : specifies the gpio pins to be used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+- fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the
+  SPISEL_BOOT signal is used as chip select for a slave device. Use
+  reg = <number of gpios> in the corresponding child node, i.e. 0 if
+  the cs-gpios property is not present.
+
+Example:
+	spi@4c0 {
+		cell-index = <0>;
+		compatible = "fsl,spi";
+		reg = <4c0 40>;
+		interrupts = <82 0>;
+		interrupt-parent = <700>;
+		mode = "cpu";
+		cs-gpios = <&gpio 18 1		// device reg=<0>
+			    &gpio 19 1>;	// device reg=<1>
+	};
+
+
+* eSPI (Enhanced Serial Peripheral Interface)
+
+Required properties:
+- compatible : should be "fsl,mpc8536-espi".
+- reg : Offset and length of the register set for the device.
+- interrupts : should contain eSPI interrupt, the device has one interrupt.
+- fsl,espi-num-chipselects : the number of the chipselect signals.
+
+Optional properties:
+- fsl,csbef: chip select assertion time in bits before frame starts
+- fsl,csaft: chip select negation time in bits after frame ends
+
+Example:
+	spi@110000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc8536-espi";
+		reg = <0x110000 0x1000>;
+		interrupts = <53 0x2>;
+		interrupt-parent = <&mpic>;
+		fsl,espi-num-chipselects = <4>;
+		fsl,csbef = <1>;
+		fsl,csaft = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
new file mode 100644
index 0000000000..7797c3123b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP spi controller flash interface
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-spifi
+
+  reg:
+    items:
+      - description: cfg registers
+      - description: data registers
+      - description: mapped memory
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    spi@200 {
+      compatible = "hpe,gxp-spifi";
+      reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>;
+      interrupts = <20>;
+      interrupt-parent = <&vic0>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        reg = <0>;
+        compatible = "jedec,spi-nor";
+      };
+
+      flash@1 {
+        reg = <1>;
+        compatible = "jedec,spi-nor";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt b/Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt
new file mode 100644
index 0000000000..852b651f3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/icpdas-lp8841-spi-rtc.txt
@@ -0,0 +1,54 @@
+* ICP DAS LP-8841 SPI Controller for RTC
+
+ICP DAS LP-8841 contains a DS-1302 RTC. RTC is connected to an IO
+memory register, which acts as an SPI master device.
+
+The device uses the standard MicroWire half-duplex transfer timing.
+Master output is set on low clock and sensed by the RTC on the rising
+edge. Master input is set by the RTC on the trailing edge and is sensed
+by the master on low clock.
+
+Required properties:
+
+- #address-cells: should be 1
+
+- #size-cells: should be 0
+
+- compatible: should be "icpdas,lp8841-spi-rtc"
+
+- reg: should provide IO memory address
+
+Requirements to SPI slave nodes:
+
+- There can be only one slave device.
+
+- The spi slave node should claim the following flags which are
+  required by the spi controller.
+
+  - spi-3wire: The master itself has only 3 wire. It cannor work in
+    full duplex mode.
+
+  - spi-cs-high: DS-1302 has active high chip select line. The master
+    doesn't support active low.
+
+  - spi-lsb-first: DS-1302 requires least significant bit first
+    transfers. The master only support this type of bit ordering.
+
+
+Example:
+
+spi@901c {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "icpdas,lp8841-spi-rtc";
+	reg = <0x901c 0x1>;
+
+	rtc@0 {
+		compatible = "maxim,ds1302";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+		spi-3wire;
+		spi-lsb-first;
+		spi-cs-high;
+	};
+};
diff --git a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
new file mode 100644
index 0000000000..c08d55b900
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ingenic,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs SPI controller
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4750-spi
+          - ingenic,jz4775-spi
+          - ingenic,jz4780-spi
+          - ingenic,x1000-spi
+          - ingenic,x2000-spi
+      - items:
+          - enum:
+              - ingenic,jz4760-spi
+              - ingenic,jz4770-spi
+          - const: ingenic,jz4750-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    spi@10043000 {
+      compatible = "ingenic,jz4770-spi", "ingenic,jz4750-spi";
+      reg = <0x10043000 0x1c>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <8>;
+
+      clocks = <&cgu JZ4770_CLK_SSI0>;
+
+      dmas = <&dmac1 23 0xffffffff>, <&dmac1 22 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/spi/jcore,spi.txt b/Documentation/devicetree/bindings/spi/jcore,spi.txt
new file mode 100644
index 0000000000..93936d16e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/jcore,spi.txt
@@ -0,0 +1,34 @@
+J-Core SPI master
+
+Required properties:
+
+- compatible: Must be "jcore,spi2".
+
+- reg: Memory region for registers.
+
+- #address-cells: Must be 1.
+
+- #size-cells: Must be 0.
+
+Optional properties:
+
+- clocks: If a phandle named "ref_clk" is present, SPI clock speed
+  programming is relative to the frequency of the indicated clock.
+  Necessary only if the input clock rate is something other than a
+  fixed 50 MHz.
+
+- clock-names: Clock names, one for each phandle in clocks.
+
+See spi-bus.txt for additional properties not specific to this device.
+
+Example:
+
+spi@40 {
+	compatible = "jcore,spi2";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x40 0x8>;
+	spi-max-frequency = <25000000>;
+	clocks = <&bus_clk>;
+	clock-names = "ref_clk";
+}
diff --git a/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml
new file mode 100644
index 0000000000..de9d32fead
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/loongson,ls2k-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson SPI controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls2k1000-spi
+      - items:
+          - enum:
+              - loongson,ls2k0500-spi
+          - const: loongson,ls2k1000-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@1fff0220{
+        compatible = "loongson,ls2k1000-spi";
+        reg = <0x1fff0220 0x10>;
+        clocks = <&clk 17>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
new file mode 100644
index 0000000000..5f4f6b5615
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA2xx SSP SPI Controller
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,mmp2-ssp
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ready-gpios:
+    description: |
+      GPIO used to signal a SPI master that the FIFO is filled and we're
+      ready to service a transfer. Only useful in slave mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+dependencies:
+  ready-gpios: [ spi-slave ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    spi@d4035000 {
+        compatible = "marvell,mmp2-ssp";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xd4035000 0x1000>;
+        clocks = <&soc_clocks MMP2_CLK_SSP0>;
+        interrupts = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
new file mode 100644
index 0000000000..b6249880c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Bus controller for MediaTek ARM SoCs
+
+maintainers:
+  - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7629-spi
+              - mediatek,mt8365-spi
+          - const: mediatek,mt7622-spi
+      - items:
+          - enum:
+              - mediatek,mt8516-spi
+          - const: mediatek,mt2712-spi
+      - items:
+          - enum:
+              - mediatek,mt6779-spi
+              - mediatek,mt8186-spi
+              - mediatek,mt8192-spi
+              - mediatek,mt8195-spi
+          - const: mediatek,mt6765-spi
+      - items:
+          - enum:
+              - mediatek,mt7986-spi-ipm
+              - mediatek,mt8188-spi-ipm
+          - const: mediatek,spi-ipm
+      - items:
+          - enum:
+              - mediatek,mt2701-spi
+              - mediatek,mt2712-spi
+              - mediatek,mt6589-spi
+              - mediatek,mt6765-spi
+              - mediatek,mt6893-spi
+              - mediatek,mt7622-spi
+              - mediatek,mt8135-spi
+              - mediatek,mt8173-spi
+              - mediatek,mt8183-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: clock used for the parent clock
+      - description: clock used for the muxes clock
+      - description: clock used for the clock gate
+      - description: clock used for the AHB bus, this clock is optional
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: parent-clk
+      - const: sel-clk
+      - const: spi-clk
+      - const: hclk
+
+  mediatek,pad-select:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      specify which pins group(ck/mi/mo/cs) spi controller used.
+      This is an array.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi@1100a000 {
+      compatible = "mediatek,mt8173-spi";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0x1100a000 0x1000>;
+      interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+               <&topckgen CLK_TOP_SPI_SEL>,
+               <&pericfg CLK_PERI_SPI0>;
+      clock-names = "parent-clk", "sel-clk", "spi-clk";
+      cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+      mediatek,pad-select = <1>, <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
new file mode 100644
index 0000000000..a453996c13
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-nor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Serial NOR flash controller for MediaTek ARM SoCs
+
+maintainers:
+  - Bayi Cheng <bayi.cheng@mediatek.com>
+  - Chuanhong Guo <gch981213@gmail.com>
+
+description: |
+  This spi controller support single, dual, or quad mode transfer for
+  SPI NOR flash. There should be only one spi slave device following
+  generic spi bindings. It's not recommended to use this controller
+  for devices other than SPI NOR flash due to limited transfer
+  capability of this controller.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-nor
+          - mediatek,mt8186-nor
+          - mediatek,mt8192-nor
+      - items:
+          - enum:
+              - mediatek,mt2701-nor
+              - mediatek,mt2712-nor
+              - mediatek,mt7622-nor
+              - mediatek,mt7623-nor
+              - mediatek,mt7629-nor
+              - mediatek,mt8195-nor
+          - const: mediatek,mt8173-nor
+      - items:
+          - enum:
+              - mediatek,mt8188-nor
+          - const: mediatek,mt8186-nor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: clock used for spi bus
+      - description: clock used for controller
+      - description: clock used for nor dma bus. this depends on hardware
+                     design, so this is optional.
+      - description: clock used for controller axi slave bus.
+                     this depends on hardware design, so it is optional.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: sf
+      - const: axi
+      - const: axi_s
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      nor_flash: spi@1100d000 {
+        compatible = "mediatek,mt8173-nor";
+        reg = <0 0x1100d000 0 0xe0>;
+        interrupts = <1>;
+        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+                 <&pericfg CLK_PERI_NFI>;
+        clock-names = "spi", "sf", "axi";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "jedec,spi-nor";
+          reg = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
new file mode 100644
index 0000000000..1e5e89a693
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash controller for MediaTek ARM SoCs
+
+maintainers:
+  - Chuanhong Guo <gch981213@gmail.com>
+
+description: |
+  The Mediatek SPI-NAND flash controller is an extended version of
+  the Mediatek NAND flash controller. It can perform standard SPI
+  instructions with one continuous write and one read for up-to 0xa0
+  bytes. It also supports typical SPI-NAND page cache operations
+  in single, dual or quad IO mode with pipelined ECC encoding/decoding
+  using the accompanying ECC engine. There should be only one spi
+  slave device following generic spi bindings.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-snand
+      - mediatek,mt7629-snand
+      - mediatek,mt7986-snand
+
+  reg:
+    items:
+      - description: core registers
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  nand-ecc-engine:
+    description: device-tree node of the accompanying ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  mediatek,rx-latch-latency-ns:
+    description: Data read latch latency, unit is nanoseconds.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nand-ecc-engine
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7622-snand
+            - mediatek,mt7629-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt7986-snand
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock used for the controller
+            - description: clock used for the SPI bus
+            - description: clock used for the AHB bus
+        clock-names:
+          items:
+            - const: nfi_clk
+            - const: pad_clk
+            - const: nfi_hclk
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      snfi: spi@1100d000 {
+        compatible = "mediatek,mt7622-snand";
+        reg = <0 0x1100d000 0 0x1000>;
+        interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+        clock-names = "nfi_clk", "pad_clk";
+        nand-ecc-engine = <&bch>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "spi-nand";
+          reg = <0>;
+          spi-tx-bus-width = <4>;
+          spi-rx-bus-width = <4>;
+          nand-ecc-engine = <&snfi>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
new file mode 100644
index 0000000000..d19c9f7397
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-slave-mt27xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Slave controller for MediaTek ARM SoCs
+
+maintainers:
+  - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2712-spi-slave
+      - mediatek,mt8195-spi-slave
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: spi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi@10013000 {
+      compatible = "mediatek,mt2712-spi-slave";
+      reg = <0x10013000 0x100>;
+      interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+      clock-names = "spi";
+      assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
new file mode 100644
index 0000000000..74a817cc7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip FPGA {Q,}SPI Controllers
+
+description:
+  SPI and QSPI controllers on Microchip PolarFire SoC and the "soft"/
+  fabric IP cores they are based on
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-qspi
+          - const: microchip,coreqspi-rtl-v2
+      - const: microchip,coreqspi-rtl-v2 # FPGA QSPI
+      - const: microchip,mpfs-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    spi@20108000 {
+        compatible = "microchip,mpfs-spi";
+        reg = <0x20108000 0x1000>;
+        clocks = <&clkcfg CLK_SPI0>;
+        interrupt-parent = <&plic>;
+        interrupts = <54>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
new file mode 100644
index 0000000000..79de379f4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
@@ -0,0 +1,34 @@
+Microchip PIC32 SPI Master controller
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-spi".
+- reg: Address and length of register space for the device.
+- interrupts: Should contain all three spi interrupts in sequence
+              of <fault-irq>, <receive-irq>, <transmit-irq>.
+- interrupt-names: Should be "fault", "rx", "tx" in order.
+- clocks: Phandle of the clock generating SPI clock on the bus.
+- clock-names: Should be "mck0".
+- cs-gpios: Specifies the gpio pins to be used for chipselects.
+            See: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+- dmas: Two or more DMA channel specifiers following the convention outlined
+        in Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: Names for the dma channels. There must be at least one channel
+             named "spi-tx" for transmit and named "spi-rx" for receive.
+
+Example:
+
+spi1: spi@1f821000 {
+        compatible = "microchip,pic32mzda-spi";
+        reg = <0x1f821000 0x200>;
+        interrupts = <109 IRQ_TYPE_LEVEL_HIGH>,
+                     <110 IRQ_TYPE_LEVEL_HIGH>,
+                     <111 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "fault", "rx", "tx";
+        clocks = <&PBCLK2>;
+        clock-names = "mck0";
+        cs-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+        dmas = <&dma 134>, <&dma 135>;
+        dma-names = "spi-rx", "spi-tx";
+};
diff --git a/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
new file mode 100644
index 0000000000..303f6dca89
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mikrotik,rb4xx-spi.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mikrotik,rb4xx-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MikroTik RB4xx series SPI master
+
+maintainers:
+  - Gabor Juhos <juhosg@openwrt.org>
+  - Bert Vermeulen <bert@biot.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: mikrotik,rb4xx-spi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi: spi@1f000000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "mikrotik,rb4xx-spi";
+        reg = <0x1f000000 0x10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
new file mode 100644
index 0000000000..221fe6e2ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxicy,mx25f0a-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix SPI controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: mxicy,mx25f0a-spi
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: send_clk
+      - const: send_dly_clk
+      - const: ps_clk
+
+  nand-ecc-engine:
+    description: NAND ECC engine used by the SPI controller in order to perform
+      on-the-fly correction when using a SPI-NAND memory.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@43c30000 {
+      compatible = "mxicy,mx25f0a-spi";
+      reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>;
+      reg-names = "regs", "dirmap";
+      clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>;
+      clock-names = "send_clk", "send_dly_clk", "ps_clk";
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
new file mode 100644
index 0000000000..e2512166c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MX233/MX28 SSP/SPI
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-spi
+      - fsl,imx28-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  clock-frequency:
+    description: input clock frequency to the SPI block in Hz.
+    default: 160000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@80010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-spi";
+        reg = <0x80010000 0x2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+    };
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
new file mode 100644
index 0000000000..fb38e96d39
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
@@ -0,0 +1,58 @@
+* Nuvoton FLASH Interface Unit (FIU) SPI Controller
+
+NPCM FIU supports single, dual and quad communication interface.
+
+The NPCM7XX supports three FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU3 support four chip select.
+
+The NPCM8XX supports four FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU1 and FIU3 supports four chip selects.
+
+Required properties:
+  - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
+			     "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
+  - #address-cells : should be 1.
+  - #size-cells : should be 0.
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - reg-names: Should contain the reg names "control" and "memory"
+  - clocks : phandle of FIU reference clock.
+
+Required properties in case the pins can be muxed:
+  - pinctrl-names : a pinctrl state named "default" must be defined.
+  - pinctrl-0 : phandle referencing pin configuration of the device.
+
+Optional property:
+  - nuvoton,spix-mode: enable spix-mode for an expansion bus to an ASIC or CPLD.
+
+Aliases:
+- All the FIU controller nodes should be represented in the aliases node using
+  the following format 'fiu{n}' where n is a unique number for the alias.
+  In the NPCM7XX BMC:
+  		fiu0 represent fiu 0 controller
+  		fiu1 represent fiu 3 controller
+  		fiu2 represent fiu x controller
+
+  In the NPCM8XX BMC:
+  		fiu0 represent fiu 0 controller
+  		fiu1 represent fiu 1 controller
+  		fiu2 represent fiu 3 controller
+  		fiu3 represent fiu x controller
+
+Example:
+fiu3: spi@c00000000 {
+	compatible = "nuvoton,npcm750-fiu";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0xfb000000 0x1000>, <0x80000000 0x10000000>;
+	reg-names = "control", "memory";
+	clocks = <&clk NPCM7XX_CLK_AHB>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins>;
+	flash@0 {
+			...
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
new file mode 100644
index 0000000000..a4e72e52af
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
@@ -0,0 +1,36 @@
+Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver
+
+Nuvoton NPCM7xx SOC support two PSPI channels.
+
+Required properties:
+ - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX.
+				"nuvoton,npcm845-pspi" for Arbel NPCM8XX.
+ - #address-cells : should be 1. see spi-bus.txt
+ - #size-cells : should be 0. see spi-bus.txt
+ - specifies physical base address and size of the register.
+ - interrupts : contain PSPI interrupt.
+ - clocks : phandle of PSPI reference clock.
+ - clock-names: Should be "clk_apb5".
+ - pinctrl-names : a pinctrl state named "default" must be defined.
+ - pinctrl-0 : phandle referencing pin configuration of the device.
+ - resets : phandle to the reset control for this device.
+ - cs-gpios: Specifies the gpio pins to be used for chipselects.
+            See: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+- clock-frequency : Input clock frequency to the PSPI block in Hz.
+		    Default is 25000000 Hz.
+
+spi0: spi@f0200000 {
+	compatible = "nuvoton,npcm750-pspi";
+	reg = <0xf0200000 0x1000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pspi1_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clk NPCM7XX_CLK_APB5>;
+	clock-names = "clk_apb5";
+	resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>
+	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
new file mode 100644
index 0000000000..4e0d391e1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nuvoton,wpcm450-fiu.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nuvoton,wpcm450-fiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 Flash Interface Unit (FIU)
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-fiu
+
+  reg:
+    items:
+      - description: FIU registers
+      - description: Memory-mapped flash contents
+
+  reg-names:
+    items:
+      - const: control
+      - const: memory
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,shm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the SHM block (see ../arm/nuvoton,shm.yaml)
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@c8000000 {
+      compatible = "nuvoton,wpcm450-fiu";
+      reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg-names = "control", "memory";
+      clocks = <&clk 0>;
+      nuvoton,shm = <&shm>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+      };
+    };
+
+    shm: syscon@c8001000 {
+      compatible = "nuvoton,wpcm450-shm", "syscon";
+      reg = <0xc8001000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml
new file mode 100644
index 0000000000..58222ffa53
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra114-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 SPI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra114-spi
+      - items:
+          - enum:
+              - nvidia,tegra210-spi
+              - nvidia,tegra124-spi
+          - const: nvidia,tegra114-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI module clock
+
+  clock-names:
+    items:
+      - const: spi
+
+  resets:
+    items:
+      - description: SPI module reset
+
+  reset-names:
+    items:
+      - const: spi
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: spi-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    spi@7000d600 {
+        compatible = "nvidia,tegra114-spi";
+        reg = <0x7000d600 0x200>;
+        interrupts = <0 82 0x04>;
+        clocks = <&tegra_car 44>;
+        clock-names = "spi";
+        resets = <&tegra_car 44>;
+        reset-names = "spi";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        spi-max-frequency = <25000000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            nvidia,rx-clk-tap-delay = <0>;
+            nvidia,tx-clk-tap-delay = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml
new file mode 100644
index 0000000000..e245bad85a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra20-sflash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 SFLASH controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-sflash
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: spi
+
+  dmas:
+    items:
+      - description: DMA channel used for reception
+      - description: DMA channel used for transmission
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: spi-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7000c380 {
+        compatible = "nvidia,tegra20-sflash";
+        reg = <0x7000c380 0x80>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+        spi-max-frequency = <25000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA20_CLK_SPI>;
+        resets = <&tegra_car 43>;
+        reset-names = "spi";
+        dmas = <&apbdma 11>, <&apbdma 11>;
+        dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml
new file mode 100644
index 0000000000..291c25ec01
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra20-slink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20/30 SLINK controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-slink
+      - nvidia,tegra30-slink
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: spi
+
+  dmas:
+    items:
+      - description: DMA channel used for reception
+      - description: DMA channel used for transmission
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  operating-points-v2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  spi-max-frequency:
+    description: Maximum SPI clocking speed of the controller in Hz.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: spi-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+  - dmas
+  - dma-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7000d600 {
+        compatible = "nvidia,tegra20-slink";
+        reg = <0x7000d600 0x200>;
+        interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+        spi-max-frequency = <25000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+        resets = <&tegra_car 44>;
+        reset-names = "spi";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+    };
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml
new file mode 100644
index 0000000000..2c3cada753
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Tegra Quad SPI Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  nvidia,tx-clk-tap-delay:
+    description:
+      Delays the clock going out to device with this tap value.
+      Tap value varies based on platform design trace lengths from Tegra
+      QSPI to corresponding slave device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  nvidia,rx-clk-tap-delay:
+    description:
+      Delays the clock coming in from the device with this tap value.
+      Tap value varies based on platform design trace lengths from Tegra
+      QSPI to corresponding slave device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
new file mode 100644
index 0000000000..9ae1611175
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Quad SPI Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra210-qspi
+      - nvidia,tegra186-qspi
+      - nvidia,tegra194-qspi
+      - nvidia,tegra234-qspi
+      - nvidia,tegra241-qspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: qspi
+      - const: qspi_out
+
+  clocks:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+
+    properties:
+      spi-rx-bus-width:
+        enum: [1, 2, 4]
+
+      spi-tx-bus-width:
+        enum: [1, 2, 4]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/reset/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spi@70410000 {
+        compatible = "nvidia,tegra210-qspi";
+        reg = <0x70410000 0x1000>;
+        interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+                 <&tegra_car TEGRA210_CLK_QSPI_PM>;
+        clock-names = "qspi", "qspi_out";
+        resets = <&tegra_car 211>;
+        dmas = <&apbdma 5>, <&apbdma 5>;
+        dma-names = "rx", "tx";
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <104000000>;
+            spi-tx-bus-width = <2>;
+            spi-rx-bus-width = <2>;
+            nvidia,tx-clk-tap-delay = <0>;
+            nvidia,rx-clk-tap-delay = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml
new file mode 100644
index 0000000000..ff4d361707
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/omap-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Controller on OMAP and K3 SoCs
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,am654-mcspi
+              - ti,am4372-mcspi
+          - const: ti,omap4-mcspi
+      - items:
+          - enum:
+              - ti,omap2-mcspi
+              - ti,omap4-mcspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ti,spi-num-cs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of chipselect supported  by the instance.
+    minimum: 1
+    maximum: 4
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Must be "mcspi<n>", n being the instance number (1-based).
+      This property is applicable only on legacy platforms mainly omap2/3
+      and ti81xx and should not be used on other platforms.
+    deprecated: true
+
+  ti,pindir-d0-out-d1-in:
+    description:
+      Select the D0 pin as output and D1 as input. The default is D0
+      as input and D1 as output.
+    type: boolean
+
+  dmas:
+    description:
+      List of DMA specifiers with the controller specific format as
+      described in the generic DMA client binding. A tx and rx
+      specifier is required for each chip select.
+    minItems: 1
+    maxItems: 8
+
+  dma-names:
+    description:
+      List of DMA request names. These strings correspond 1:1 with
+      the DMA specifiers listed in dmas. The string names is to be
+      "rxN" and "txN" for RX and TX requests, respectively. Where N
+      is the chip select number.
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+if:
+  properties:
+    compatible:
+      enum:
+        - ti,omap2-mcspi
+        - ti,omap4-mcspi
+
+then:
+  properties:
+    ti,hwmods:
+      items:
+        - pattern: "^mcspi([1-9])$"
+
+else:
+  properties:
+    ti,hwmods: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    spi@2100000 {
+      compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+      reg = <0x2100000 0x400>;
+      interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&k3_clks 137 1>;
+      power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+      dma-names = "tx0", "rx0";
+    };
diff --git a/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml
new file mode 100644
index 0000000000..7b19f2c1cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qca,ar934x-spi.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qca,ar934x-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR934x/QCA95xx SoC SPI controller
+
+maintainers:
+  - Chuanhong Guo <gch981213@gmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qca,ar934x-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ath79-clk.h>
+    spi: spi@1f000000 {
+        compatible = "qca,ar934x-spi";
+        reg = <0x1f000000 0x1c>;
+        clocks = <&pll ATH79_CLK_AHB>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
new file mode 100644
index 0000000000..2e20ca313e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP v3 core is a GENI based AHB slave that provides a common data path
+  (an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+  mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+  SPI Controller nodes must be child of GENI based Qualcomm Universal
+  Peripharal. Please refer GENI based QUP wrapper controller node bindings
+  described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qcom,geni-spi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    spi@880000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&qup_opp_table>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+
+  - |
+    #include <dt-bindings/dma/qcom-gpi.h>
+
+    spi@884000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00884000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+        dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+               <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi1_default>;
+        interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
new file mode 100644
index 0000000000..1696ac46a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: The QSPI controller allows SPI protocol communication in single,
+  dual, or quad wire transmission modes for read/write access to slaves such
+  as NOR flash.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7180-qspi
+          - qcom,sc7280-qspi
+          - qcom,sdm845-qspi
+
+      - const: qcom,qspi-v1
+
+  reg:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  clocks:
+    items:
+      - description: AHB clock
+      - description: QSPI core clock
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: qspi-config
+      - const: qspi-memory
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc: soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qspi: spi@88df000 {
+            compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+            reg = <0 0x88df000 0 0x600>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clock-names = "iface", "core";
+            clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+                         <&gcc GCC_QSPI_CORE_CLK>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <25000000>;
+                spi-tx-bus-width = <2>;
+                spi-rx-bus-width = <2>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
new file mode 100644
index 0000000000..93f14dd01a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP core is an AHB slave that provides a common data path (an output FIFO
+  and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
+      - qcom,spi-qup-v2.1.1 # for 8974 and later
+      - qcom,spi-qup-v2.2.1 # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7575000 {
+        compatible = "qcom,spi-qup-v2.2.1";
+        reg = <0x07575000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_spi1_default>;
+        pinctrl-1 = <&blsp1_spi1_sleep>;
+        dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml
new file mode 100644
index 0000000000..22879f7dcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ralink,mt7621-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+title: Mediatek MT7621/MT7628 SPI controller
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: ralink,mt7621-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: spi
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: spi
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    spi@b00 {
+      compatible = "ralink,mt7621-spi";
+      reg = <0xb00 0x100>;
+      clocks = <&sysc MT7621_CLK_SPI>;
+      clock-names = "spi";
+      resets = <&sysc MT7621_RST_SPI>;
+      reset-names = "spi";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&spi_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
new file mode 100644
index 0000000000..70330d945a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/realtek,rtl-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL838x/RTL839x SPI controller
+
+maintainers:
+  - Bert Vermeulen <bert@biot.com>
+  - Birger Koblitz <mail@birger-koblitz.de>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8380-spi
+      - realtek,rtl8382-spi
+      - realtek,rtl8391-spi
+      - realtek,rtl8392-spi
+      - realtek,rtl8393-spi
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi: spi@1200 {
+        compatible = "realtek,rtl8382-spi";
+        reg = <0x1200 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
new file mode 100644
index 0000000000..bab5d4b7fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,hspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas HSPI
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,hspi-r8a7778 # R-Car M1A
+          - renesas,hspi-r8a7779 # R-Car H1
+      - const: renesas,hspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7778-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hspi0: spi@fffc7000 {
+        compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+        reg = <0xfffc7000 0x18>;
+        interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+        power-domains = <&cpg_clocks>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
new file mode 100644
index 0000000000..4d8ec69214
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas (Quad) Serial Peripheral Interface (RSPI/QSPI)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,rspi-sh7757    # SH7757
+          - const: renesas,rspi        # Legacy SH
+
+      - items:
+          - enum:
+              - renesas,rspi-r7s72100  # RZ/A1H
+              - renesas,rspi-r7s9210   # RZ/A2
+              - renesas,r9a07g043-rspi # RZ/G2UL
+              - renesas,r9a07g044-rspi # RZ/G2{L,LC}
+              - renesas,r9a07g054-rspi # RZ/V2L
+          - const: renesas,rspi-rz
+
+      - items:
+          - enum:
+              - renesas,qspi-r8a7742   # RZ/G1H
+              - renesas,qspi-r8a7743   # RZ/G1M
+              - renesas,qspi-r8a7744   # RZ/G1N
+              - renesas,qspi-r8a7745   # RZ/G1E
+              - renesas,qspi-r8a77470  # RZ/G1C
+              - renesas,qspi-r8a7790   # R-Car H2
+              - renesas,qspi-r8a7791   # R-Car M2-W
+              - renesas,qspi-r8a7792   # R-Car V2H
+              - renesas,qspi-r8a7793   # R-Car M2-N
+              - renesas,qspi-r8a7794   # R-Car E2
+          - const: renesas,qspi        # R-Car Gen2 and RZ/G1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: A combined interrupt
+      - items:
+          - description: Error interrupt (SPEI)
+          - description: Receive Interrupt (SPRI)
+          - description: Transmit Interrupt (SPTI)
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: mux
+      - items:
+          - const: error
+          - const: rx
+          - const: tx
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+    description:
+      Must contain a list of pairs of references to DMA specifiers, one for
+      transmission, and one for reception.
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum:
+        - tx
+        - rx
+
+  num-cs:
+    description: |
+      Total number of native chip selects.
+      Hardware limitations related to chip selects:
+        - When using GPIO chip selects, at least one native chip select must
+          be left unused, as it will be driven anyway.
+    minimum: 1
+    maximum: 2
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rspi-rz
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,qspi
+              - renesas,r9a07g043-rspi
+              - renesas,r9a07g044-rspi
+              - renesas,r9a07g054-rspi
+    then:
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    qspi: spi@e6b10000 {
+        compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+        reg = <0xe6b10000 0x2c>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 917>;
+        dmas = <&dmac0 0x17>, <&dmac0 0x18>, <&dmac1 0x17>, <&dmac1 0x18>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 917>;
+        num-cs = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
new file mode 100644
index 0000000000..e59183e536
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,rzv2m-csi.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rzv2m-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M Clocked Serial Interface (CSI)
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,rzv2m-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The clock used to generate the output clock (CSICLK)
+      - description: Internal clock to access the registers (PCLK)
+
+  clock-names:
+    items:
+      - const: csiclk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    csi4: spi@a4020200 {
+        compatible = "renesas,rzv2m-csi";
+        reg = <0xa4020200 0x80>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>,
+                 <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>;
+        clock-names = "csiclk", "pclk";
+        resets = <&cpg R9A09G011_CSI_GPH_PRESETN>;
+        power-domains = <&cpg>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
new file mode 100644
index 0000000000..00acbbb0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas MSIOF SPI controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,msiof-sh73a0     # SH-Mobile AG5
+          - const: renesas,sh-mobile-msiof  # generic SH-Mobile compatible
+                                            # device
+      - items:
+          - enum:
+              - renesas,msiof-r8a7742       # RZ/G1H
+              - renesas,msiof-r8a7743       # RZ/G1M
+              - renesas,msiof-r8a7744       # RZ/G1N
+              - renesas,msiof-r8a7745       # RZ/G1E
+              - renesas,msiof-r8a77470      # RZ/G1C
+              - renesas,msiof-r8a7790       # R-Car H2
+              - renesas,msiof-r8a7791       # R-Car M2-W
+              - renesas,msiof-r8a7792       # R-Car V2H
+              - renesas,msiof-r8a7793       # R-Car M2-N
+              - renesas,msiof-r8a7794       # R-Car E2
+          - const: renesas,rcar-gen2-msiof  # generic R-Car Gen2 and RZ/G1
+                                            # compatible device
+      - items:
+          - enum:
+              - renesas,msiof-r8a774a1      # RZ/G2M
+              - renesas,msiof-r8a774b1      # RZ/G2N
+              - renesas,msiof-r8a774c0      # RZ/G2E
+              - renesas,msiof-r8a774e1      # RZ/G2H
+              - renesas,msiof-r8a7795       # R-Car H3
+              - renesas,msiof-r8a7796       # R-Car M3-W
+              - renesas,msiof-r8a77961      # R-Car M3-W+
+              - renesas,msiof-r8a77965      # R-Car M3-N
+              - renesas,msiof-r8a77970      # R-Car V3M
+              - renesas,msiof-r8a77980      # R-Car V3H
+              - renesas,msiof-r8a77990      # R-Car E3
+              - renesas,msiof-r8a77995      # R-Car D3
+          - const: renesas,rcar-gen3-msiof  # generic R-Car Gen3 and RZ/G2
+                                            # compatible device
+      - items:
+          - enum:
+              - renesas,msiof-r8a779a0      # R-Car V3U
+              - renesas,msiof-r8a779f0      # R-Car S4-8
+              - renesas,msiof-r8a779g0      # R-Car V4H
+          - const: renesas,rcar-gen4-msiof  # generic R-Car Gen4
+                                            # compatible device
+      - items:
+          - const: renesas,sh-msiof  # deprecated
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    oneOf:
+      - items:
+          - description: CPU and DMA engine registers
+      - items:
+          - description: CPU registers
+          - description: DMA engine registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-cs:
+    description: |
+      Total number of chip selects (default is 1).
+      Up to 3 native chip selects are supported:
+        0: MSIOF_SYNC
+        1: MSIOF_SS1
+        2: MSIOF_SS2
+      Hardware limitations related to chip selects:
+        - Native chip selects are always deasserted in between transfers
+          that are part of the same message.  Use cs-gpios to work around
+          this.
+        - All slaves using native chip selects must use the same spi-cs-high
+          configuration.  Use cs-gpios to work around this.
+        - When using GPIO chip selects, at least one native chip select must
+          be left unused, as it will be driven anyway.
+    minimum: 1
+    maximum: 3
+    default: 1
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+
+  dma-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      enum: [ tx, rx ]
+
+  renesas,dtdl:
+    description: delay sync signal (setup) in transmit mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0        # no bit delay
+      - 50       # 0.5-clock-cycle delay
+      - 100      # 1-clock-cycle delay
+      - 150      # 1.5-clock-cycle delay
+      - 200      # 2-clock-cycle delay
+
+  renesas,syncdl:
+    description: delay sync signal (hold) in transmit mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0        # no bit delay
+      - 50       # 0.5-clock-cycle delay
+      - 100      # 1-clock-cycle delay
+      - 150      # 1.5-clock-cycle delay
+      - 200      # 2-clock-cycle delay
+      - 300      # 3-clock-cycle delay
+
+  renesas,tx-fifo-size:
+    # deprecated for soctype-specific bindings
+    description: |
+      Override the default TX fifo size.  Unit is words.  Ignored if 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+
+  renesas,rx-fifo-size:
+    # deprecated for soctype-specific bindings
+    description: |
+      Override the default RX fifo size.  Unit is words.  Ignored if 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: renesas,sh-mobile-msiof
+then:
+  required:
+    - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7791-sysc.h>
+
+    msiof0: spi@e6e20000 {
+        compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof";
+        reg = <0xe6e20000 0x0064>;
+        interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 000>;
+        dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+        dma-names = "tx", "rx";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
new file mode 100644
index 0000000000..339fb39529
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/rockchip-sfc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/rockchip-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Serial Flash Controller (SFC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: rockchip,sfc
+    description:
+      The rockchip sfc controller is a standalone IP with version register,
+      and the driver can handle all the feature difference inside the IP
+      depending on the version register.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: clk_sfc
+      - const: hclk_sfc
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,sfc-no-dma:
+    description: Disable DMA and utilize FIFO mode only
+    type: boolean
+
+patternProperties:
+  "^flash@[0-3]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    sfc: spi@ff3a0000 {
+        compatible = "rockchip,sfc";
+        reg = <0xff3a0000 0x4000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+        clock-names = "clk_sfc", "hclk_sfc";
+        pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
+        pinctrl-names = "default";
+        power-domains = <&power PX30_PD_MMC_NAND>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <108000000>;
+            spi-rx-bus-width = <2>;
+            spi-tx-bus-width = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
new file mode 100644
index 0000000000..25b1b6c12d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+properties:
+  controller-data:
+    type: object
+    additionalProperties: false
+
+    properties:
+      samsung,spi-feedback-delay:
+        description: |
+          The sampling phase shift to be applied on the miso line (to account
+          for any lag in the miso line). Valid values:
+           - 0: No phase shift.
+           - 1: 90 degree phase shift sampling.
+           - 2: 180 degree phase shift sampling.
+           - 3: 270 degree phase shift sampling.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
new file mode 100644
index 0000000000..79da99ca0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  All the SPI controller nodes should be represented in the aliases node using
+  the following format 'spi{n}' where n is a unique number for the alias.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
+          - samsung,s3c6410-spi
+          - samsung,s5pv210-spi # for S5PV210 and S5PC110
+          - samsung,exynos4210-spi
+          - samsung,exynos5433-spi
+          - samsung,exynosautov9-spi
+          - tesla,fsd-spi
+      - const: samsung,exynos7-spi
+        deprecated: true
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  dmas:
+    minItems: 2
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  no-cs-readback:
+    description:
+      The CS line is disconnected, therefore the device should not operate
+      based on CS signalling.
+    type: boolean
+
+  num-cs:
+    minimum: 1
+    maximum: 4
+    default: 1
+
+  samsung,spi-src-clk:
+    description:
+      If the spi controller includes a internal clock mux to select the clock
+      source for the spi bus clock, this property can be used to indicate the
+      clock to be used for driving the spi bus clock. If not specified, the
+      clock number 0 is used as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-spi
+              - samsung,exynosautov9-spi
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: spi
+            - enum:
+                - spi_busclk0
+                - spi_busclk1
+                - spi_busclk2
+                - spi_busclk3
+            - const: spi_ioclk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: spi
+            - enum:
+                - spi_busclk0
+                - spi_busclk1
+                - spi_busclk2
+                - spi_busclk3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/clock/samsung,s2mps11.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi@14d30000 {
+        compatible = "samsung,exynos5433-spi";
+        reg = <0x14d30000 0x100>;
+        interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&pdma0 11>, <&pdma0 10>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peric CLK_PCLK_SPI1>,
+                 <&cmu_peric CLK_SCLK_SPI1>,
+                 <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+        clock-names = "spi",
+                      "spi_busclk0",
+                      "spi_ioclk";
+        samsung,spi-src-clk = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&spi1_bus>;
+        num-cs = <1>;
+
+        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+
+        audio-codec@0 {
+            compatible = "wlf,wm5110";
+            reg = <0x0>;
+            spi-max-frequency = <20000000>;
+            interrupt-parent = <&gpa0>;
+            interrupts = <4 IRQ_TYPE_NONE>;
+            clocks = <&pmu_system_controller 0>,
+                     <&s2mps13_osc S2MPS11_CLK_BT>;
+            clock-names = "mclk1", "mclk2";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            wlf,micd-detect-debounce = <300>;
+            wlf,micd-bias-start-time = <0x1>;
+            wlf,micd-rate = <0x7>;
+            wlf,micd-dbtime = <0x2>;
+            wlf,micd-force-micbias;
+            wlf,micd-configs = <0x0 1 0>;
+            wlf,hpdet-channel = <1>;
+            wlf,gpsw = <0x1>;
+            wlf,inmode = <2 0 2 0>;
+
+            wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+            wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+            /* core supplies */
+            AVDD-supply = <&ldo18_reg>;
+            DBVDD1-supply = <&ldo18_reg>;
+            CPVDD-supply = <&ldo18_reg>;
+            DBVDD2-supply = <&ldo18_reg>;
+            DBVDD3-supply = <&ldo18_reg>;
+            SPKVDDL-supply = <&ldo18_reg>;
+            SPKVDDR-supply = <&ldo18_reg>;
+
+            controller-data {
+                samsung,spi-feedback-delay = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
new file mode 100644
index 0000000000..a47cb144b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+    then:
+      properties:
+        reg:
+          minItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - baikal,bt1-sys-ssi
+    then:
+      properties:
+        mux-controls:
+          maxItems: 1
+      required:
+        - mux-controls
+    else:
+      required:
+        - interrupts
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amd,pensando-elba-spi
+    then:
+      required:
+        - amd,pensando-elba-syscon
+    else:
+      properties:
+        amd,pensando-elba-syscon: false
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic DW SPI Controller
+        enum:
+          - snps,dw-apb-ssi
+          - snps,dwc-ssi-1.01a
+      - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller
+        items:
+          - enum:
+              - mscc,ocelot-spi
+              - mscc,jaguar2-spi
+          - const: snps,dw-apb-ssi
+      - description: Microchip Sparx5 SoC SPI Controller
+        const: microchip,sparx5-spi
+      - description: Amazon Alpine SPI Controller
+        const: amazon,alpine-dw-apb-ssi
+      - description: Renesas RZ/N1 SPI Controller
+        items:
+          - const: renesas,rzn1-spi
+          - const: snps,dw-apb-ssi
+      - description: Intel Keem Bay SPI Controller
+        const: intel,keembay-ssi
+      - description: Intel Thunder Bay SPI Controller
+        const: intel,thunderbay-ssi
+      - description: Intel Mount Evans Integrated Management Complex SPI Controller
+        const: intel,mountevans-imc-ssi
+      - description: AMD Pensando Elba SoC SPI Controller
+        const: amd,pensando-elba-spi
+      - description: Baikal-T1 SPI Controller
+        const: baikal,bt1-ssi
+      - description: Baikal-T1 System Boot SPI Controller
+        const: baikal,bt1-sys-ssi
+      - description: Canaan Kendryte K210 SoS SPI Controller
+        const: canaan,k210-spi
+      - description: Renesas RZ/N1 SPI Controller
+        items:
+          - enum:
+              - renesas,r9a06g032-spi # RZ/N1D
+              - renesas,r9a06g033-spi # RZ/N1S
+          - const: renesas,rzn1-spi   # RZ/N1
+
+  reg:
+    minItems: 1
+    items:
+      - description: DW APB SSI controller memory mapped registers
+      - description: SPI MST region map or directly mapped SPI ROM
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: SPI Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ssi_clk
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: spi
+
+  reg-io-width:
+    description: I/O register width (in bytes) implemented by this device
+    default: 4
+    enum: [ 2, 4 ]
+
+  num-cs:
+    default: 4
+    minimum: 1
+    maximum: 4
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rx-sample-delay-ns:
+    default: 0
+    description: |
+      Default value of the rx-sample-delay-ns property.
+      This value will be used if the property is not explicitly defined
+      for a SPI slave device.
+
+      SPI Rx sample delay offset, unit is nanoseconds.
+      The delay from the default sample time before the actual sample of the
+      rxd input signal occurs. The "rx_sample_delay" is an optional feature
+      of the designware controller, and the upper limit is also subject to
+      controller configuration.
+
+  amd,pensando-elba-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Block address to control SPI chip-selects. The Elba SoC system controller
+      provides an interface to override the native DWC SSI CS control.
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+examples:
+  - |
+    spi@fff00000 {
+      compatible = "snps,dw-apb-ssi";
+      reg = <0xfff00000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <0 154 4>;
+      clocks = <&spi_m_clk>;
+      num-cs = <2>;
+      cs-gpios = <&gpio0 13 0>,
+                 <&gpio0 14 0>;
+      rx-sample-delay-ns = <3>;
+      flash@1 {
+        compatible = "spi-nand";
+        reg = <1>;
+        rx-sample-delay-ns = <7>;
+      };
+    };
+  - |
+    spi@1f040100 {
+      compatible = "baikal,bt1-sys-ssi";
+      reg = <0x1f040100 0x900>,
+            <0x1c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-controls = <&boot_mux>;
+      clocks = <&ccu_sys>;
+      clock-names = "ssi_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml b/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml
new file mode 100644
index 0000000000..9878d14465
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/socionext,f-ospi.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,f-ospi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext F_OSPI controller
+
+description: |
+  The Socionext F_OSPI is a controller used to interface with flash
+  memories using the SPI communication interface.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,f-ospi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  num-cs:
+    minimum: 1
+    maximum: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ospi0: spi@80000000 {
+        compatible = "socionext,f-ospi";
+        reg = <0x80000000 0x1000>;
+        clocks = <&clks 0>;
+        num-cs = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spansion,s25fl128s", "jedec,spi-nor";
+            reg = <0>;
+            spi-max-frequency = <50000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml
new file mode 100644
index 0000000000..45cbe744c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/socionext,synquacer-spi.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,synquacer-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer HS-SPI Controller
+
+maintainers:
+  - Masahisa Kojima <masahisa.kojima@linaro.org>
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: core clock
+      - description: rate clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: iHCLK
+      - const: iPCLK
+
+  interrupts:
+    items:
+      - description: Receive Interrupt
+      - description: Transmit Interrupt
+      - description: Fault Interrupt
+
+  socionext,use-rtm:
+    type: boolean
+    description: Enable using "retimed clock" for RX
+
+  socionext,set-aces:
+    type: boolean
+    description: Enable same active clock edges field to be set
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@ff110000 {
+        compatible = "socionext,synquacer-spi";
+        reg = <0xff110000 0x1000>;
+        interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+               <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+               <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_hsspi>;
+        clock-names = "iHCLK";
+        socionext,use-rtm;
+        socionext,set-aces;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
new file mode 100644
index 0000000000..c96131ebbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/socionext,uniphier-spi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/socionext,uniphier-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier SPI controller
+
+description: |
+  UniPhier SoCs have SCSSI which supports SPI single channel.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-scssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@54006000 {
+        compatible = "socionext,uniphier-scssi";
+        reg = <0x54006000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <0 39 4>;
+        clocks = <&peri_clk 11>;
+        resets = <&peri_rst 11>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-armada-3700.txt b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt
new file mode 100644
index 0000000000..1564aa8c02
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-armada-3700.txt
@@ -0,0 +1,25 @@
+* Marvell Armada 3700 SPI Controller
+
+Required Properties:
+
+- compatible: should be "marvell,armada-3700-spi"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number. The interrupt specifier format depends on
+	      the interrupt controller and of its driver.
+- clocks: Must contain the clock source, usually from the North Bridge clocks.
+- num-cs: The number of chip selects that is supported by this SPI Controller
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+	spi0: spi@10600 {
+		compatible = "marvell,armada-3700-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10600 0x5d>;
+		clocks = <&nb_perih_clk 7>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		num-cs = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/spi-ath79.txt b/Documentation/devicetree/bindings/spi/spi-ath79.txt
new file mode 100644
index 0000000000..9c696fa66f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-ath79.txt
@@ -0,0 +1,24 @@
+Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller
+
+Required properties:
+- compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback.
+- reg: Base address and size of the controllers memory area
+- clocks: phandle of the AHB clock.
+- clock-names: has to be "ahb".
+- #address-cells: <1>, as required by generic SPI binding.
+- #size-cells: <0>, also as required by generic SPI binding.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@1f000000 {
+		compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+		reg = <0x1f000000 0x10>;
+
+		clocks = <&pll 2>;
+		clock-names = "ahb";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
new file mode 100644
index 0000000000..e077835054
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -0,0 +1 @@
+This file has moved to spi-controller.yaml.
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
new file mode 100644
index 0000000000..d4b61b0e83
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-cadence.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence SPI controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,spi-r1p6
+      - xlnx,zynq-spi-r1p6
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+  clocks:
+    maxItems: 2
+
+  num-cs:
+    description: |
+      Number of chip selects used. If a decoder is used,
+      this will be the number of chip selects after the
+      decoder.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 4
+
+  is-decoded-cs:
+    description: |
+      Flag to indicate whether decoder is used or not.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 0
+
+  power-domains:
+    maxItems: 1
+
+  label:
+    description: Descriptive name of the SPI controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e0007000 {
+      compatible = "xlnx,zynq-spi-r1p6";
+      clock-names = "ref_clk", "pclk";
+      clocks = <&clkc 26>, <&clkc 35>;
+      interrupt-parent = <&intc>;
+      interrupts = <0 49 4>;
+      num-cs = <4>;
+      is-decoded-cs = <0>;
+      reg = <0xe0007000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-clps711x.txt b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
new file mode 100644
index 0000000000..5122dc7860
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-clps711x.txt
@@ -0,0 +1,32 @@
+Serial Peripheral Interface on Cirrus Logic CL-PS71xx, EP72xx, EP73xx
+
+Required properties
+- #address-cells: must be <1>
+- #size-cells: must be <0>
+- compatible: should include "cirrus,ep7209-spi"
+- reg: Address and length of one register range
+- interrupts: one interrupt line
+- clocks: One entry, refers to the SPI bus clock
+- cs-gpios: Specifies the gpio pins to be used for chipselects.
+	    See: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+An additional register is present in the system controller,
+which is assumed to be in the same device tree, with and marked
+as compatible with "cirrus,ep7209-syscon3".
+
+Example:
+
+spi@80000500 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "cirrus,ep7209-spi";
+	reg = <0x80000500 0x4>;
+	interrupts = <15>;
+	clocks = <&clks CLPS711X_CLK_SPI>;
+};
+
+syscon3: syscon@80002200 {
+	compatible = "cirrus,ep7209-syscon3", "syscon";
+	reg = <0x80002200 0x40>;
+};
+
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
new file mode 100644
index 0000000000..524f6fe8c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Controller Common Properties
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+description: |
+  SPI busses can be described with a node for the SPI controller device
+  and a set of child nodes for each SPI slave on the bus. The system SPI
+  controller may be described for use in SPI master mode or in SPI slave mode,
+  but not for both at the same time.
+
+properties:
+  $nodename:
+    pattern: "^spi(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#address-cells":
+    enum: [0, 1]
+
+  "#size-cells":
+    const: 0
+
+  cs-gpios:
+    description: |
+      GPIOs used as chip selects.
+      If that property is used, the number of chip selects will be
+      increased automatically with max(cs-gpios, hardware chip selects).
+
+      So if, for example, the controller has 4 CS lines, and the
+      cs-gpios looks like this
+        cs-gpios = <&gpio1 0 0>, <0>, <&gpio1 1 0>, <&gpio1 2 0>;
+
+      Then it should be configured so that num_chipselect = 4, with
+      the following mapping
+        cs0 : &gpio1 0 0
+        cs1 : native
+        cs2 : &gpio1 1 0
+        cs3 : &gpio1 2 0
+
+      The second flag of a gpio descriptor can be GPIO_ACTIVE_HIGH (0)
+      or GPIO_ACTIVE_LOW(1). Legacy device trees often use 0.
+
+      There is a special rule set for combining the second flag of an
+      cs-gpio with the optional spi-cs-high flag for SPI slaves.
+
+      Each table entry defines how the CS pin is to be physically
+      driven (not considering potential gpio inversions by pinmux):
+
+      device node     | cs-gpio       | CS pin state active | Note
+      ================+===============+=====================+=====
+      spi-cs-high     | -             | H                   |
+      -               | -             | L                   |
+      spi-cs-high     | ACTIVE_HIGH   | H                   |
+      -               | ACTIVE_HIGH   | L                   | 1
+      spi-cs-high     | ACTIVE_LOW    | H                   | 2
+      -               | ACTIVE_LOW    | L                   |
+
+      Notes:
+      1) Should print a warning about polarity inversion.
+         Here it would be wise to avoid and define the gpio as
+         ACTIVE_LOW.
+      2) Should print a warning about polarity inversion
+         because ACTIVE_LOW is overridden by spi-cs-high.
+         Should be generally avoided and be replaced by
+         spi-cs-high + ACTIVE_HIGH.
+
+  num-cs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Total number of chip selects.
+
+  spi-slave:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The SPI controller acts as a slave, instead of a master.
+
+  slave:
+    type: object
+
+    properties:
+      compatible:
+        description:
+          Compatible of the SPI device.
+
+    required:
+      - compatible
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    $ref: spi-peripheral-props.yaml
+    additionalProperties: true
+
+    properties:
+      spi-3wire:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires 3-wire mode.
+
+      spi-cpha:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires shifted clock phase (CPHA) mode.
+
+      spi-cpol:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires inverse clock polarity (CPOL) mode.
+
+    required:
+      - compatible
+      - reg
+
+allOf:
+  - if:
+      not:
+        required:
+          - spi-slave
+    then:
+      properties:
+        "#address-cells":
+          const: 1
+    else:
+      properties:
+        "#address-cells":
+          const: 0
+
+additionalProperties: true
+
+examples:
+  - |
+    spi@80010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-spi";
+        reg = <0x80010000 0x2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+
+        display@0 {
+            compatible = "lg,lg4573";
+            spi-max-frequency = <1000000>;
+            reg = <0>;
+        };
+
+        sensor@1 {
+            compatible = "bosch,bme680";
+            spi-max-frequency = <100000>;
+            reg = <1>;
+        };
+
+        flash@2 {
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            reg = <2>, <3>;
+            stacked-memories = /bits/ 64 <0x10000000 0x10000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
new file mode 100644
index 0000000000..f012888656
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -0,0 +1,100 @@
+Davinci SPI controller device bindings
+
+Links on DM:
+Keystone 2 - https://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
+dm644x - https://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
+OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
+
+Required properties:
+- #address-cells: number of cells required to define a chip select
+	address on the SPI bus. Should be set to 1.
+- #size-cells: should be zero.
+- compatible:
+	- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
+	- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+	- "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
+		family
+- reg: Offset and length of SPI controller register space
+- num-cs: Number of chip selects. This includes internal as well as
+	GPIO chip selects.
+- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
+	IP to the interrupt controller within the SoC. Possible values
+	are 0 and 1. Manual says one of the two possible interrupt
+	lines can be tied to the interrupt controller. Set this
+	based on a specific SoC configuration.
+- interrupts: interrupt number mapped to CPU.
+- clocks: spi clk phandle
+          For 66AK2G this property should be set per binding,
+          Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the SPI device id
+			value. This property is as per the binding,
+
+Optional:
+- cs-gpios: gpio chip selects
+	For example to have 3 internal CS and 2 GPIO CS, user could define
+	cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
+	where first three are internal CS and last two are GPIO CS.
+
+Optional properties for slave devices:
+SPI slave nodes can contain the following properties.
+Not all SPI Peripherals from Texas Instruments support this.
+Please check SPI peripheral documentation for a device before using these.
+
+- ti,spi-wdelay : delay between transmission of words
+	(SPIFMTn.WDELAY, SPIDAT1.WDEL) must be specified in number of SPI module
+	clock periods.
+
+	delay = WDELAY * SPI_module_clock_period + 2 * SPI_module_clock_period
+
+Below is timing diagram which shows functional meaning of
+"ti,spi-wdelay" parameter.
+
+             +-+ +-+ +-+ +-+ +-+                           +-+ +-+ +-+
+SPI_CLK      | | | | | | | | | |                           | | | | | |
+  +----------+ +-+ +-+ +-+ +-+ +---------------------------+ +-+ +-+ +-
+
+SPI_SOMI/SIMO+-----------------+                           +-----------
+  +----------+ word1           +---------------------------+word2
+             +-----------------+                           +-----------
+                                          WDELAY
+                                <-------------------------->
+
+Example of a NOR flash slave device (n25q032) connected to DaVinci
+SPI controller device over the SPI bus.
+
+spi0:spi@20bf0000 {
+	#address-cells			= <1>;
+	#size-cells			= <0>;
+	compatible			= "ti,dm6446-spi";
+	reg				= <0x20BF0000 0x1000>;
+	num-cs				= <4>;
+	ti,davinci-spi-intr-line	= <0>;
+	interrupts			= <338>;
+	clocks				= <&clkspi>;
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+		ti,spi-wdelay = <8>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "test";
+			reg = <0x80000 0x380000>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
new file mode 100644
index 0000000000..30a79da9c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -0,0 +1,65 @@
+ARM Freescale DSPI controller
+
+Required properties:
+- compatible : must be one of:
+	"fsl,vf610-dspi",
+	"fsl,ls1021a-v1.0-dspi",
+	"fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1028a-dspi",
+	"fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+	"fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
+	"fsl,ls2085a-dspi",
+	"fsl,lx2160a-dspi",
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+- clocks: from common clock binding: handle to dspi clock.
+- clock-names: from common clock binding: Shall be "dspi".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must contain a "default" entry.
+- spi-num-chipselects : the number of the chipselect signals.
+
+Optional property:
+- big-endian: If present the dspi device's registers are implemented
+  in big endian mode.
+- bus-num : the slave chip chipselect signal number.
+
+Optional SPI slave node properties:
+- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
+  select and the start of clock signal, at the start of a transfer.
+- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
+  signal and deactivating chip select, at the end of a transfer.
+
+Example:
+
+dspi0@4002c000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,vf610-dspi";
+	reg = <0x4002c000 0x1000>;
+	interrupts = <0 67 0x04>;
+	clocks = <&clks VF610_CLK_DSPI0>;
+	clock-names = "dspi";
+	spi-num-chipselects = <5>;
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0_1>;
+	big-endian;
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		linux,modalias = "m25p80";
+		modal = "at26df081a";
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+};
+
+
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
new file mode 100644
index 0000000000..727c5346b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-fsl-lpspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Low Power SPI (LPSPI) for i.MX
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7ulp-spi
+          - fsl,imx8qxp-spi
+      - items:
+          - enum:
+              - fsl,imx8ulp-spi
+              - fsl,imx93-spi
+          - const: fsl,imx7ulp-spi
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI per clock
+      - description: SoC SPI ipg clock
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  fsl,spi-only-use-cs1-sel:
+    description:
+      spi common code does not support use of CS signals discontinuously.
+      i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add
+      this property to re-config the chipselect value in the LPSPI driver.
+    type: boolean
+
+  num-cs:
+    description:
+      number of chip selects.
+    minimum: 1
+    maximum: 2
+    default: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@40290000 {
+        compatible = "fsl,imx7ulp-spi";
+        reg = <0x40290000 0x10000>;
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX7ULP_CLK_LPSPI2>,
+                 <&clks IMX7ULP_CLK_DUMMY>;
+        clock-names = "per", "ipg";
+        spi-slave;
+        fsl,spi-only-use-cs1-sel;
+        num-cs = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.yaml b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
new file mode 100644
index 0000000000..9ce1df93d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-GPIO
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  This represents a group of 3-n GPIO lines used for bit-banged SPI on
+  dedicated GPIO lines.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: spi-gpio
+
+  sck-gpios:
+    description: GPIO spec for the SCK line to use
+    maxItems: 1
+
+  miso-gpios:
+    description: GPIO spec for the MISO line to use
+    maxItems: 1
+
+  mosi-gpios:
+    description: GPIO spec for the MOSI line to use
+    maxItems: 1
+
+  cs-gpios:
+    description: GPIOs to use for chipselect lines.
+      Not needed if num-chipselects = <0>.
+    minItems: 1
+    maxItems: 1024
+
+  num-chipselects:
+    description: Number of chipselect lines. Should be <0> if a single device
+      with no chip select is connected.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  # Deprecated properties
+  gpio-sck: false
+  gpio-miso: false
+  gpio-mosi: false
+
+required:
+  - compatible
+  - num-chipselects
+  - sck-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      compatible = "spi-gpio";
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      sck-gpios = <&gpio 95 0>;
+      miso-gpios = <&gpio 98 0>;
+      mosi-gpios = <&gpio 97 0>;
+      cs-gpios = <&gpio 125 0>;
+      num-chipselects = <1>;
+
+      /* clients */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
new file mode 100644
index 0000000000..494db6012d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt
@@ -0,0 +1,39 @@
+IMG Synchronous Peripheral Flash Interface (SPFI) controller
+
+Required properties:
+- compatible: Must be "img,spfi".
+- reg: Must contain the base address and length of the SPFI registers.
+- interrupts: Must contain the SPFI interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - spfi: SPI operating clock
+  - sys: SPI system interface clock
+- dmas: Must contain an entry for each entry in dma-names.
+  See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+  - rx
+  - tx
+- cs-gpios: Must specify the GPIOs used for chipselect lines.
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+
+Optional properties:
+- img,supports-quad-mode: Should be set if the interface supports quad mode
+  SPI transfers.
+- spfi-max-frequency: Maximum speed supported by the spfi block.
+
+Example:
+
+spi@18100f00 {
+	compatible = "img,spfi";
+	reg = <0x18100f00 0x100>;
+	interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&spi_clk>, <&system_clk>;
+	clock-names = "spfi", "sys";
+	dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+	dma-names = "rx", "tx";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
new file mode 100644
index 0000000000..76a3dd35f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt
@@ -0,0 +1,46 @@
+Lantiq Synchronous Serial Controller (SSC) SPI master driver
+
+Required properties:
+- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi",
+  "intel,lgm-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts:
+  For compatible "intel,lgm-ssc" - the common interrupt number for
+  all of tx rx & err interrupts.
+       or
+  For rest of the compatibles, should contain the "spi_rx", "spi_tx" and
+  "spi_err" interrupt.
+
+
+Optional properties:
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt, set to 8 if unset
+- base-cs: the number of the first chip select, set to 1 if unset.
+
+Example:
+
+
+spi: spi@e100800 {
+	compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
+	reg = <0xE100800 0x100>;
+	interrupt-parent = <&icu0>;
+	interrupts = <22 23 24>;
+	interrupt-names = "spi_rx", "spi_tx", "spi_err";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	num-cs = <6>;
+	base-cs = <1>;
+};
+
+ssc0: spi@e0800000 {
+	compatible = "intel,lgm-spi";
+	reg = <0xe0800000 0x400>;
+	interrupt-parent = <&ioapic1>;
+	interrupts = <35 1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&cgu0 LGM_CLK_NGI>, <&cgu0 LGM_GCLK_SSC0>;
+	clock-names = "freq", "gate";
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml
new file mode 100644
index 0000000000..fb2a603992
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SPI Multiplexer
+
+description: |
+  This binding describes a SPI bus multiplexer to route the SPI chip select
+  signals. This can be used when you need more devices than the SPI controller
+  has chip selects available. An example setup is shown in ASCII art; the actual
+  setting of the multiplexer to a channel needs to be done by a specific SPI mux
+  driver.
+
+        MOSI /--------------------------------+--------+--------+--------\
+        MISO |/------------------------------+|-------+|-------+|-------\|
+         SCL ||/----------------------------+||------+||------+||------\||
+             |||                            |||      |||      |||      |||
+      +------------+                        |||      |||      |||      |||
+      | SoC  |||   |                      +-+++-+  +-+++-+  +-+++-+  +-+++-+
+      |      |||   |                      | dev |  | dev |  | dev |  | dev |
+      |   +--+++-+ | CS-X  +------+\      +--+--+  +--+--+  +--+--+  +--+--+
+      |   | SPI  +-|-------+ Mux  |\\   CS-0 |        |        |        |
+      |   +------+ |       +--+---+\\\-------/   CS-1 |        |        |
+      |            |          |    \\\----------------/   CS-2 |        |
+      |   +------+ |          |     \\-------------------------/   CS-3 |
+      |   | ?    +-|----------/      \----------------------------------/
+      |   +------+ |
+      +------------+
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: spi-mux
+
+  mux-controls:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - mux-controls
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    mux: mux-controller {
+        compatible = "gpio-mux";
+        #mux-control-cells = <0>;
+
+        mux-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        spi@0 {
+            compatible = "spi-mux";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            spi-max-frequency = <100000000>;
+
+            mux-controls = <&mux>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                reg = <0>;
+                spi-max-frequency = <40000000>;
+            };
+
+            sensor@1 {
+                compatible = "bosch,bme680";
+                reg = <1>;
+                spi-max-frequency = <10000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
new file mode 100644
index 0000000000..7fd5911454
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-nxp-fspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Flex Serial Peripheral Interface (FSPI)
+
+maintainers:
+  - Han Xu <han.xu@nxp.com>
+  - Kuldeep Singh <singh.kuldeep87k@gmail.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8dxl-fspi
+      - nxp,imx8mm-fspi
+      - nxp,imx8mp-fspi
+      - nxp,imx8qxp-fspi
+      - nxp,lx2160a-fspi
+
+  reg:
+    items:
+      - description: registers address space
+      - description: memory mapped address space
+
+  reg-names:
+    items:
+      - const: fspi_base
+      - const: fspi_mmap
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPI bus clock
+      - description: SPI serial clock
+
+  clock-names:
+    items:
+      - const: fspi_en
+      - const: fspi
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        spi@20c0000 {
+            compatible = "nxp,lx2160a-fspi";
+            reg = <0x0 0x20c0000 0x0 0x100000>,
+                  <0x0 0x20000000 0x0 0x10000000>;
+            reg-names = "fspi_base", "fspi_mmap";
+            interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>,
+                     <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>;
+            clock-names = "fspi_en", "fspi";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            flash@0 {
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                reg = <0>;
+                spi-rx-bus-width = <8>;
+                spi-tx-bus-width = <8>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-octeon.txt b/Documentation/devicetree/bindings/spi/spi-octeon.txt
new file mode 100644
index 0000000000..431add1923
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-octeon.txt
@@ -0,0 +1,33 @@
+Cavium, Inc. OCTEON SOC SPI master controller.
+
+Required properties:
+- compatible : "cavium,octeon-3010-spi"
+- reg : The register base for the controller.
+- interrupts : One interrupt, used by the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@1070000001000 {
+		compatible = "cavium,octeon-3010-spi";
+		reg = <0x10700 0x00001000 0x0 0x100>;
+		interrupts = <0 58>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eeprom@0 {
+			compatible = "st,m95256", "atmel,at25";
+			reg = <0>;
+			spi-max-frequency = <5000000>;
+			spi-cpha;
+			spi-cpol;
+
+			pagesize = <64>;
+			size = <32768>;
+			address-width = <16>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
new file mode 100644
index 0000000000..8434a65fc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -0,0 +1,79 @@
+Marvell Orion SPI device
+
+Required properties:
+- compatible : should be on of the following:
+    - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs
+    - "marvell,armada-370-spi", for the Armada 370 SoCs
+    - "marvell,armada-375-spi", for the Armada 375 SoCs
+    - "marvell,armada-380-spi", for the Armada 38x SoCs
+    - "marvell,armada-390-spi", for the Armada 39x SoCs
+    - "marvell,armada-xp-spi", for the Armada XP SoCs
+- reg : offset and length of the register set for the device.
+	This property can optionally have additional entries to configure
+	the SPI direct access mode that some of the Marvell SoCs support
+	additionally to the normal indirect access (PIO) mode. The values
+	for the MBus "target" and "attribute" are defined in the Marvell
+	SoC "Functional Specifications" Manual in the chapter "Marvell
+	Core Processor Address Decoding".
+	The eight register sets following the control registers refer to
+	chip-select lines 0 through 7 respectively.
+- cell-index : Which of multiple SPI controllers is this.
+- clocks : pointers to the reference clocks for this device, the first
+	   one is the one used for the clock on the spi bus, the
+	   second one is optional and is the clock used for the
+	   functional part of the controller
+
+Optional properties:
+- interrupts : Is currently not used.
+- clock-names : names of used clocks, mandatory if the second clock is
+		used, the name must be "core", and "axi" (the latter
+		is only for Armada 7K/8K).
+
+
+Example:
+       spi@10600 {
+	       compatible = "marvell,orion-spi";
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+	       cell-index = <0>;
+	       reg = <0x10600 0x28>;
+	       interrupts = <23>;
+       };
+
+Example with SPI direct mode support (optionally):
+	spi0: spi@10600 {
+		compatible = "marvell,orion-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <0>;
+		reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+		      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+		      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+		      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+		      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+		      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+		      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+		      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+		      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+		interrupts = <23>;
+	};
+
+To enable the direct mode, the board specific 'ranges' property in the
+'soc' node needs to add the entries for the desired SPI controllers
+and its chip-selects that are used in the direct mode instead of PIO
+mode. Here an example for this (SPI controller 0, device 1 and SPI
+controller 1, device 2 are used in direct mode. All other SPI device
+are used in the default indirect (PIO) mode):
+	soc {
+		/*
+		 * Enable the SPI direct access by configuring an entry
+		 * here in the board-specific ranges property
+		 */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000>,	/* internal regs */
+			 <MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>,	/* BootROM       */
+			 <MBUS_ID(0x01, 0x5e) 0 0 0xf1100000 0x10000>,	/* SPI0-DEV1 */
+			 <MBUS_ID(0x01, 0x9a) 0 0 0xf1110000 0x10000>;	/* SPI1-DEV2 */
+
+For further information on the MBus bindings, please see the MBus
+DT documentation:
+Documentation/devicetree/bindings/bus/mvebu-mbus.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
new file mode 100644
index 0000000000..782a014b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a SPI bus.
+
+description:
+  Many SPI controllers need to add properties to peripheral devices. They could
+  be common properties like spi-max-frequency, spi-cpha, etc. or they could be
+  controller specific like delay in clock or data lines, etc. These properties
+  need to be defined in the peripheral node because they are per-peripheral and
+  there can be multiple peripherals attached to a controller. All those
+  properties are listed here. The controller specific properties should go in
+  their own separate schema that should be referenced from here.
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 256
+    items:
+      items:
+        - minimum: 0
+          maximum: 256
+    description:
+      Chip select used by the device.
+
+  spi-cs-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the chip select active high.
+
+  spi-lsb-first:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The device requires the LSB first mode.
+
+  spi-max-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum SPI clocking speed of the device in Hz.
+
+  spi-cs-setup-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller after CS is
+      asserted.
+
+  spi-cs-hold-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller before CS is
+      de-asserted.
+
+  spi-cs-inactive-delay-ns:
+    description:
+      Delay in nanoseconds to be introduced by the controller after CS is
+      de-asserted.
+
+  spi-rx-bus-width:
+    description:
+      Bus width to the SPI bus used for read transfers.
+      If 0 is provided, then no RX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-rx-delay-us:
+    description:
+      Delay, in microseconds, after a read transfer.
+
+  rx-sample-delay-ns:
+    description: SPI Rx sample delay offset, unit is nanoseconds.
+      The delay from the default sample time before the actual
+      sample of the rxd input signal occurs.
+
+  spi-tx-bus-width:
+    description:
+      Bus width to the SPI bus used for write transfers.
+      If 0 is provided, then no TX will be possible on this device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 4, 8]
+    default: 1
+
+  spi-tx-delay-us:
+    description:
+      Delay, in microseconds, after a write transfer.
+
+  stacked-memories:
+    description: Several SPI memories can be wired in stacked mode.
+      This basically means that either a device features several chip
+      selects, or that different devices must be seen as a single
+      bigger chip. This basically doubles (or more) the total address
+      space with only a single additional wire, while still needing
+      to repeat the commands when crossing a chip boundary. The size of
+      each chip should be provided as members of the array.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    minItems: 2
+    maxItems: 4
+
+  parallel-memories:
+    description: Several SPI memories can be wired in parallel mode.
+      The devices are physically on a different buses but will always
+      act synchronously as each data word is spread across the
+      different memories (eg. even bits are stored in one memory, odd
+      bits in the other). This basically doubles the address space and
+      the throughput while greatly complexifying the wiring because as
+      many busses as devices must be wired. The size of each chip should
+      be provided as members of the array.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    minItems: 2
+    maxItems: 4
+
+# The controller specific properties go here.
+allOf:
+  - $ref: cdns,qspi-nor-peripheral-props.yaml#
+  - $ref: samsung,spi-peripheral-props.yaml#
+  - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
new file mode 100644
index 0000000000..5e5a704a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-pl022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL022 SPI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl022
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl022
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sspclk
+      - const: apb_pclk
+
+  pl022,autosuspend-delay:
+    description: delay in ms following transfer completion before the
+      runtime power management system suspends the device. A setting of 0
+      indicates no delay and the device will be suspended immediately.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pl022,rt:
+    description: indicates the controller should run the message pump with realtime
+      priority to minimise the transfer latency on the bus (boolean)
+    type: boolean
+
+  dmas:
+    description:
+      Two or more DMA channel specifiers following the convention outlined
+      in bindings/dma/dma.txt
+    minItems: 2
+    maxItems: 32
+
+  dma-names:
+    description:
+      There must be at least one channel named "tx" for transmit and named "rx"
+      for receive.
+    minItems: 2
+    maxItems: 32
+    additionalItems: true
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+    type: object
+    # SPI slave nodes must be children of the SPI master node and can
+    # contain the following properties.
+    properties:
+      pl022,interface:
+        description: SPI interface type
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 0      # SPI
+          - 1      # Texas Instruments Synchronous Serial Frame Format
+          - 2      # Microwire (Half Duplex)
+
+      pl022,com-mode:
+        description: Specifies the transfer mode
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 0      # interrupt mode
+          - 1      # polling mode
+          - 2      # DMA mode
+        default: 1
+
+      pl022,rx-level-trig:
+        description: Rx FIFO watermark level
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 4
+
+      pl022,tx-level-trig:
+        description: Tx FIFO watermark level
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 4
+
+      pl022,ctrl-len:
+        description: Microwire interface - Control length
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0x03
+        maximum: 0x1f
+
+      pl022,wait-state:
+        description: Microwire interface - Wait state
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      pl022,duplex:
+        description: Microwire interface - Full/Half duplex
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e0100000 {
+      compatible = "arm,pl022", "arm,primecell";
+      reg = <0xe0100000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <0 31 0x4>;
+      dmas = <&dma_controller 23 1>,
+        <&dma_controller 24 0>;
+      dma-names = "rx", "tx";
+
+      flash@1 {
+        compatible = "st,m25p80";
+        reg = <1>;
+        spi-max-frequency = <12000000>;
+        spi-cpol;
+        spi-cpha;
+        pl022,interface = <0>;
+        pl022,com-mode = <0x2>;
+        pl022,rx-level-trig = <0>;
+        pl022,tx-level-trig = <0>;
+        pl022,ctrl-len = <0x11>;
+        pl022,wait-state = <0>;
+        pl022,duplex = <0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
new file mode 100644
index 0000000000..e4941e9212
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPI Controller
+
+description:
+  The Rockchip SPI controller is used to interface with various devices such
+  as flash and display controllers using the SPI communication interface.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3036-spi
+      - const: rockchip,rk3066-spi
+      - const: rockchip,rk3228-spi
+      - const: rockchip,rv1108-spi
+      - items:
+          - enum:
+              - rockchip,px30-spi
+              - rockchip,rk3128-spi
+              - rockchip,rk3188-spi
+              - rockchip,rk3288-spi
+              - rockchip,rk3308-spi
+              - rockchip,rk3328-spi
+              - rockchip,rk3368-spi
+              - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
+              - rockchip,rk3588-spi
+              - rockchip,rv1126-spi
+          - const: rockchip,rk3066-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: transfer-clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: spiclk
+      - const: apb_pclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rx-sample-delay-ns:
+    default: 0
+    description:
+      Nano seconds to delay after the SCLK edge before sampling Rx data
+      (may need to be fine tuned for high capacitance lines).
+      If not specified 0 will be used.
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+    description:
+      Names for the pin configuration(s); may be "default" or "sleep",
+      where the "sleep" configuration may describe the state
+      the pins should be in during system suspend.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0: spi@ff110000 {
+      compatible = "rockchip,rk3066-spi";
+      reg = <0xff110000 0x1000>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+      clock-names = "spiclk", "apb_pclk";
+      dmas = <&pdma1 11>, <&pdma1 12>;
+      dma-names = "tx", "rx";
+      pinctrl-0 = <&spi1_pins>;
+      pinctrl-1 = <&spi1_sleep>;
+      pinctrl-names = "default", "sleep";
+      rx-sample-delay-ns = <10>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi-sc18is602.txt b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt
new file mode 100644
index 0000000000..02f9033270
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt
@@ -0,0 +1,23 @@
+NXP SC18IS602/SCIS603
+
+Required properties:
+	- compatible : Should be one of
+		"nxp,sc18is602"
+		"nxp,sc18is602b"
+		"nxp,sc18is603"
+	- reg: I2C bus address
+
+Optional properties:
+	- clock-frequency : external oscillator clock frequency. If not
+	  specified, the SC18IS602 default frequency (7372000) will be used.
+
+The clock-frequency property is relevant and needed only if the chip has an
+external oscillator (SC18IS603).
+
+Example:
+
+	sc18is603@28 {
+		compatible = "nxp,sc18is603";
+		reg = <0x28>;
+		clock-frequency = <14744000>;
+	}
diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
new file mode 100644
index 0000000000..5bffefb9c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-sifive.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive SPI controller
+
+maintainers:
+  - Pragnesh Patel <pragnesh.patel@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@sifive.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sifive,fu540-c000-spi
+          - sifive,fu740-c000-spi
+      - const: sifive,spi0
+
+    description:
+      Should be "sifive,<chip>-spi" and "sifive,spi<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-spi" and "sifive,fu740-c000-spi" for the SiFive SPI v0
+      as integrated onto the SiFive FU540 and FU740 chip resp, and "sifive,spi0"
+      for the SiFive SPI v0 IP block with no chip integration tweaks.
+      Please refer to sifive-blocks-ip-versioning.txt for details
+
+      SPI RTL that corresponds to the IP block version numbers can be found here -
+      https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi
+
+  reg:
+    minItems: 1
+    items:
+      - description: SPI registers region
+      - description: Memory mapped flash region
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+    description:
+      Must reference the frequency given to the controller
+
+  sifive,fifo-depth:
+    description:
+      Depth of hardware queues; defaults to 8
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8]
+    default: 8
+
+  sifive,max-bits-per-word:
+    description:
+      Maximum bits per word; defaults to 8
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
+    default: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi: spi@10040000 {
+      compatible = "sifive,fu540-c000-spi", "sifive,spi0";
+      reg = <0x10040000 0x1000>, <0x20000000 0x10000000>;
+      interrupt-parent = <&plic>;
+      interrupts = <51>;
+      clocks = <&tlclk>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      sifive,fifo-depth = <8>;
+      sifive,max-bits-per-word = <8>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-sprd.txt b/Documentation/devicetree/bindings/spi/spi-sprd.txt
new file mode 100644
index 0000000000..3c7eacce0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sprd.txt
@@ -0,0 +1,33 @@
+Spreadtrum SPI Controller
+
+Required properties:
+- compatible: Should be "sprd,sc9860-spi".
+- reg: Offset and length of SPI controller register space.
+- interrupts: Should contain SPI interrupt.
+- clock-names: Should contain following entries:
+	"spi" for SPI clock,
+	"source" for SPI source (parent) clock,
+	"enable" for SPI module enable clock.
+- clocks: List of clock input name strings sorted in the same order
+	as the clock-names property.
+- #address-cells: The number of cells required to define a chip select
+	address on the SPI bus. Should be set to 1.
+- #size-cells: Should be set to 0.
+
+Optional properties:
+dma-names: Should contain names of the SPI used DMA channel.
+dmas: Should contain DMA channels and DMA slave ids which the SPI used
+	sorted in the same order as the dma-names property.
+
+Example:
+spi0: spi@70a00000{
+	compatible = "sprd,sc9860-spi";
+	reg = <0 0x70a00000 0 0x1000>;
+	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "spi", "source","enable";
+	clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
+	dma-names = "rx_chn", "tx_chn";
+	dmas = <&apdma 11 11>, <&apdma 12 12>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
new file mode 100644
index 0000000000..edb5ba71af
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-sunplus-sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus sp7021 SPI controller
+
+allOf:
+  - $ref: spi-controller.yaml
+
+maintainers:
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-spi
+
+  reg:
+    items:
+      - description: the SPI master registers
+      - description: the SPI slave registers
+
+  reg-names:
+    items:
+      - const: master
+      - const: slave
+
+  interrupt-names:
+    items:
+      - const: dma_w
+      - const: master_risc
+      - const: slave_risc
+
+  interrupts:
+    minItems: 3
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - pinctrl-names
+  - pinctrl-0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi@9c002d80 {
+        compatible = "sunplus,sp7021-spi";
+        reg = <0x9c002d80 0x80>, <0x9c002e00 0x80>;
+        reg-names = "master", "slave";
+        interrupt-parent = <&intc>;
+        interrupt-names = "dma_w",
+                          "master_risc",
+                          "slave_risc";
+        interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+                     <146 IRQ_TYPE_LEVEL_HIGH>,
+                     <145 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x32>;
+        resets = <&rstc 0x22>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_spi0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
new file mode 100644
index 0000000000..4beb3af041
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SPI controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-spi-2.00.a
+      - xlnx,xps-spi-2.00.b
+      - xlnx,axi-quad-spi-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,num-ss-bits:
+    description: Number of chip selects used.
+    minimum: 1
+    maximum: 32
+
+  xlnx,num-transfer-bits:
+    description: Number of bits per transfer. This will be 8 if not specified.
+    enum: [8, 16, 32]
+    default: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi0: spi@41e00000 {
+      compatible = "xlnx,xps-spi-2.00.a";
+      interrupt-parent = <&intc>;
+      interrupts = <0 31 1>;
+      reg = <0x41e00000 0x10000>;
+      xlnx,num-ss-bits = <0x1>;
+      xlnx,num-transfer-bits = <32>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt b/Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt
new file mode 100644
index 0000000000..b6ebe2bc70
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-xtensa-xtfpga.txt
@@ -0,0 +1,9 @@
+Cadence Xtensa XTFPGA platform SPI controller.
+
+This simple SPI master controller is built into xtfpga bitstreams and is used
+to control daughterboard audio codec.
+
+Required properties:
+- compatible: should be "cdns,xtfpga-spi".
+- reg: physical base address of the controller and length of memory mapped
+  region.
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
new file mode 100644
index 0000000000..e5199b109d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-zynqmp-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-qspi-1.0
+      - xlnx,zynqmp-qspi-1.0
+
+  reg:
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+  clocks:
+    maxItems: 2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      qspi: spi@ff0f0000 {
+        compatible = "xlnx,zynqmp-qspi-1.0";
+        clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+        clock-names = "ref_clk", "pclk";
+        interrupts = <0 15 4>;
+        interrupt-parent = <&gic>;
+        reg = <0x0 0xff0f0000 0x0 0x1000>,
+              <0x0 0xc0000000 0x0 0x8000000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/spi_altera.txt b/Documentation/devicetree/bindings/spi/spi_altera.txt
new file mode 100644
index 0000000000..31319dcf30
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi_altera.txt
@@ -0,0 +1,5 @@
+Altera SPI
+
+Required properties:
+- compatible : should be "ALTR,spi-1.0". <DEPRECATED>
+- compatible : should be "altr,spi-1.0".
diff --git a/Documentation/devicetree/bindings/spi/spi_oc_tiny.txt b/Documentation/devicetree/bindings/spi/spi_oc_tiny.txt
new file mode 100644
index 0000000000..d95c0b367a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi_oc_tiny.txt
@@ -0,0 +1,12 @@
+OpenCores tiny SPI
+
+Required properties:
+- compatible : should be "opencores,tiny-spi-rtlsvn2".
+- gpios : should specify GPIOs used for chipselect.
+Optional properties:
+- clock-frequency : input clock frequency to the core.
+- baud-width: width, in bits, of the programmable divider used to scale
+	the input clock to SCLK.
+
+The clock-frequency and baud-width properties are needed only if the divider
+is programmable. They are not needed if the divider is fixed.
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
new file mode 100644
index 0000000000..903b06f88b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/sprd,spi-adi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum ADI controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  ADI is the abbreviation of Anolog-Digital interface, which is used to access
+  analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
+  framework for its hardware implementation is alike to SPI bus and its timing
+  is compatile to SPI timing.
+
+  ADI controller has 50 channels including 2 software read/write channels and
+  48 hardware channels to access analog chip. For 2 software read/write channels,
+  users should set ADI registers to access analog chip. For hardware channels,
+  we can configure them to allow other hardware components to use it independently,
+  which means we can just link one analog chip address to one hardware channel,
+  then users can access the mapped analog chip address by this hardware channel
+  triggered by hardware components instead of ADI software channels.
+
+  Thus we introduce one property named "sprd,hw-channels" to configure hardware
+  channels, the first value specifies the hardware channel id which is used to
+  transfer data triggered by hardware automatically, and the second value specifies
+  the analog chip address where user want to access by hardware components.
+
+  Since we have multi-subsystems will use unique ADI to access analog chip, when
+  one system is reading/writing data by ADI software channels, that should be under
+  one hardware spinlock protection to prevent other systems from reading/writing
+  data by ADI software channels at the same time, or two parallel routine of setting
+  ADI registers will make ADI controller registers chaos to lead incorrect results.
+  Then we need one hardware spinlock to synchronize between the multiple subsystems.
+
+  The new version ADI controller supplies multiple master channels for different
+  subsystem accessing, that means no need to add hardware spinlock to synchronize,
+  thus change the hardware spinlock support to be optional to keep backward
+  compatibility.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sprd,sc9860-adi
+      - sprd,sc9863-adi
+      - sprd,ums512-adi
+
+  reg:
+    maxItems: 1
+
+  hwlocks:
+    maxItems: 1
+
+  hwlock-names:
+    const: adi
+
+  sprd,hw-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: A list of hardware channels
+    minItems: 1
+    maxItems: 48
+    items:
+      items:
+        - description: The hardware channel id which is used to transfer data
+            triggered by hardware automatically, channel id 0-1 are for software
+            use, 2-49 are hardware channels.
+          minimum: 2
+          maximum: 49
+        - description: The analog chip address where user want to access by
+            hardware components.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aon {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adi_bus: spi@40030000 {
+            compatible = "sprd,sc9860-adi";
+            reg = <0 0x40030000 0 0x10000>;
+            hwlocks = <&hwlock1 0>;
+            hwlock-names = "adi";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            sprd,hw-channels = <30 0x8c20>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/sqi-pic32.txt b/Documentation/devicetree/bindings/spi/sqi-pic32.txt
new file mode 100644
index 0000000000..c82d021bce
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sqi-pic32.txt
@@ -0,0 +1,18 @@
+Microchip PIC32 Quad SPI controller
+-----------------------------------
+Required properties:
+- compatible: Should be "microchip,pic32mzda-sqi".
+- reg: Address and length of SQI controller register space.
+- interrupts: Should contain SQI interrupt.
+- clocks: Should contain phandle of two clocks in sequence, one that drives
+          clock on SPI bus and other that drives SQI controller.
+- clock-names: Should be "spi_ck" and "reg_ck" in order.
+
+Example:
+	sqi1: spi@1f8e2000 {
+		compatible = "microchip,pic32mzda-sqi";
+		reg = <0x1f8e2000 0x200>;
+		clocks = <&rootclk REF2CLK>, <&rootclk PB5CLK>;
+		clock-names = "spi_ck", "reg_ck";
+		interrupts = <169 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Documentation/devicetree/bindings/spi/st,ssc-spi.yaml b/Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
new file mode 100644
index 0000000000..6a77cd3f5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,ssc-spi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,ssc-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SSC SPI Controller
+
+description: |
+  The STMicroelectronics SSC SPI controller can be found on STi platforms
+  and it used to communicate with external devices using the
+  Serial Peripheral Interface.
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: st,comms-ssc4-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ssc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    spi@9840000 {
+      compatible = "st,comms-ssc4-spi";
+      reg = <0x9840000 0x110>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+      clock-names = "ssc";
+      pinctrl-0 = <&pinctrl_spi0_default>;
+      pinctrl-names = "default";
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
new file mode 100644
index 0000000000..8bba965a9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI)
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: st,stm32f469-qspi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  reg-names:
+    items:
+      - const: qspi
+      - const: qspi_mm
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    spi@58003000 {
+      compatible = "st,stm32f469-qspi";
+      reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+      reg-names = "qspi", "qspi_mm";
+      interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+             <&mdma1 22 0x10 0x100008 0x0 0x0>;
+      dma-names = "tx", "rx";
+      clocks = <&rcc QSPI_K>;
+      resets = <&rcc QSPI_R>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-rx-bus-width = <4>;
+        spi-max-frequency = <108000000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
new file mode 100644
index 0000000000..9ca1a843c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI Controller
+
+description: |
+  The STM32 SPI controller is used to communicate with external devices using
+  the Serial Peripheral Interface. It supports full-duplex, half-duplex and
+  simplex synchronous serial communication with external devices. It supports
+  from 4 to 32-bit data size.
+
+maintainers:
+  - Erwan Leray <erwan.leray@foss.st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-spi
+
+    then:
+      properties:
+        st,spi-midi-ns: false
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-spi
+      - st,stm32h7-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description: |
+      DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
+      the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
+    items:
+      - description: rx DMA channel
+      - description: tx DMA channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+patternProperties:
+  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+    type: object
+    # SPI slave nodes must be children of the SPI master node and can
+    # contain the following properties.
+    properties:
+      st,spi-midi-ns:
+        description: |
+          Only for STM32H7, (Master Inter-Data Idleness) minimum time
+          delay in nanoseconds inserted between two consecutive data frames.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    spi@4000b000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "st,stm32h7-spi";
+        reg = <0x4000b000 0x400>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc SPI2_K>;
+        resets = <&rcc SPI2_R>;
+        dmas = <&dmamux1 0 39 0x400 0x05>,
+               <&dmamux1 1 40 0x400 0x05>;
+        dma-names = "rx", "tx";
+        cs-gpios = <&gpioa 11 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
new file mode 100644
index 0000000000..47b184bce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -0,0 +1,53 @@
+TI QSPI controller.
+
+Required properties:
+- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
+- reg: Should contain QSPI registers location and length.
+- reg-names: Should contain the resource reg names.
+	- qspi_base: Qspi configuration register Address space
+	- qspi_mmap: Memory mapped Address space
+	- (optional) qspi_ctrlmod: Control module Address space
+- interrupts: should contain the qspi interrupt number.
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ti,hwmods: Name of the hwmod associated to the QSPI
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+- syscon-chipselects: Handle to system control region contains QSPI
+		      chipselect register and offset of that register.
+
+NOTE: TI QSPI controller requires different pinmux and IODelay
+parameters for Mode-0 and Mode-3 operations, which needs to be set up by
+the bootloader (U-Boot). Default configuration only supports Mode-0
+operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
+specified in the slave nodes of TI QSPI controller without appropriate
+modification to bootloader.
+
+Example:
+
+For am4372:
+qspi: qspi@47900000 {
+	compatible = "ti,am4372-qspi";
+	reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
+	reg-names = "qspi_base", "qspi_mmap";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	spi-max-frequency = <25000000>;
+	ti,hwmods = "qspi";
+};
+
+For dra7xx:
+qspi: qspi@4b300000 {
+	compatible = "ti,dra7xxx-qspi";
+	reg = <0x4b300000 0x100>,
+	      <0x5c000000 0x4000000>,
+	reg-names = "qspi_base", "qspi_mmap";
+	syscon-chipselects = <&scm_conf 0x558>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	spi-max-frequency = <48000000>;
+	ti,hwmods = "qspi";
+};
diff --git a/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
new file mode 100644
index 0000000000..7ea8fb42ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/xlnx,zynq-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq QSPI controller
+
+description:
+  The Xilinx Zynq QSPI controller is used to access multi-bit serial flash
+  memory devices.
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: xlnx,zynq-qspi-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: peripheral clock
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@e000d000 {
+        compatible = "xlnx,zynq-qspi-1.0";
+        reg = <0xe000d000 0x1000>;
+        interrupt-parent = <&intc>;
+        interrupts = <0 19 4>;
+        clock-names = "ref_clk", "pclk";
+        clocks = <&clkc 10>, <&clkc 43>;
+        num-cs = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
new file mode 100644
index 0000000000..f882903769
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon SPMI controller
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  The HiSilicon SPMI BUS controller is found on some Kirin-based designs.
+  It is a MIPI System Power Management (SPMI) controller.
+
+  The PMIC part is provided by
+  ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml.
+
+allOf:
+  - $ref: spmi.yaml#
+
+properties:
+
+  $nodename:
+    pattern: "spmi@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,kirin970-spmi-controller
+
+  reg:
+    maxItems: 1
+
+  hisilicon,spmi-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      number of the Kirin 970 SPMI channel where the SPMI devices are connected.
+
+required:
+  - compatible
+  - reg
+  - hisilicon,spmi-channel
+
+patternProperties:
+  "@[0-9a-f]$":
+    type: object
+
+    description: |
+      PMIC properties, which are specific to the used SPMI PMIC device(s).
+      When used in combination with HiSilicon 6421v600, the properties
+      are documented at
+      drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      spmi: spmi@fff24000 {
+        compatible = "hisilicon,kirin970-spmi-controller";
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0 0xfff24000 0x0 0x1000>;
+        hisilicon,spmi-channel = <2>;
+
+        pmic@0 {
+          reg = <0 0>;
+          /* pmic properties */
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
new file mode 100644
index 0000000000..ac99883a3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SPMI Controller
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |+
+  On MediaTek SoCs the PMIC is connected via SPMI and the controller allows
+  for multiple SoCs to control a single SPMI master.
+
+allOf:
+  - $ref: spmi.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6873-spmi
+          - mediatek,mt8195-spmi
+      - items:
+          - enum:
+              - mediatek,mt8186-spmi
+          - const: mediatek,mt8195-spmi
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pmif
+      - const: spmimst
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pmif_sys_ck
+      - const: pmif_tmr_ck
+      - const: spmimst_clk_mux
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+
+    spmi: spmi@10027000 {
+        compatible = "mediatek,mt6873-spmi";
+        reg = <0x10027000 0xe00>,
+              <0x10029000 0x100>;
+        reg-names = "pmif", "spmimst";
+        clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+                 <&infracfg CLK_INFRA_PMIC_TMR>,
+                 <&topckgen CLK_TOP_SPMI_MST_SEL>;
+        clock-names = "pmif_sys_ck",
+                      "pmif_tmr_ck",
+                      "spmimst_clk_mux";
+        assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 0000000000..f983b4af6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+  controller with wrapping arbitration logic to allow for multiple on-chip
+  devices to control a single SPMI master.
+
+  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+  to slave devices.
+
+allOf:
+  - $ref: spmi.yaml
+
+properties:
+  compatible:
+    const: qcom,spmi-pmic-arb
+
+  reg:
+    oneOf:
+      - items: # V1
+          - description: core registers
+          - description: interrupt controller registers
+          - description: configuration registers
+      - items: # V2
+          - description: core registers
+          - description: tx-channel per virtual slave regosters
+          - description: rx-channel (called observer) per virtual slave registers
+          - description: interrupt controller registers
+          - description: configuration registers
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: core
+          - const: intr
+          - const: cnfg
+      - items:
+          - const: core
+          - const: chnls
+          - const: obsrvr
+          - const: intr
+          - const: cnfg
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: periph_irq
+
+  interrupt-controller: true
+
+  '#address-cells': true
+
+  '#interrupt-cells':
+    const: 4
+    description: |
+      cell 1: slave ID for the requested interrupt (0-15)
+      cell 2: peripheral ID for requested interrupt (0-255)
+      cell 3: the requested peripheral interrupt (0-7)
+      cell 4: interrupt flags indicating level-sense information,
+              as defined in dt-bindings/interrupt-controller/irq.h
+
+  '#size-cells': true
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      indicates the active Execution Environment identifier
+
+  qcom,channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      which of the PMIC Arb provided channels to use for accesses
+
+  qcom,bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    description: >
+      SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond.
+      Supported values, 0 = primary bus, 1 = secondary bus
+
+required:
+  - compatible
+  - reg-names
+  - qcom,ee
+  - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spmi@fc4cf000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg-names = "core", "intr", "cnfg";
+        reg = <0xfc4cf000 0x1000>,
+              <0xfc4cb000 0x1000>,
+              <0xfc4ca000 0x1000>;
+
+        interrupt-names = "periph_irq";
+        interrupts = <0 190 0>;
+
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        interrupt-controller;
+        #interrupt-cells = <4>;
+
+        qcom,bus-id = <0>;
+    };
+
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
new file mode 100644
index 0000000000..c1b06fa5c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/spmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Power Management Interface (SPMI) Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The System Power Management (SPMI) controller is a 2-wire bus defined
+  by the MIPI Alliance for power management control to be used on SoC designs.
+
+  SPMI controllers are modelled in device tree using a generic set of
+  bindings defined here, plus any bus controller specific properties, if
+  needed.
+
+  Each SPMI controller has zero or more child nodes (up to 16 ones), each
+  one representing an unique slave at the bus.
+
+properties:
+  $nodename:
+    pattern: "^spmi@.*"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[0-9a-f]$":
+    description: up to 16 child PMIC nodes
+    type: object
+
+    properties:
+      reg:
+        items:
+          - minItems: 1
+            items:
+              - minimum: 0
+                maximum: 0xf
+              - enum: [ 0 ]
+                description:
+                  0 means user ID address. 1 is reserved for group ID
+                  address.
+
+    required:
+      - reg
+
+required:
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    spmi@0 {
+      reg = <0 0>;
+
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      child@0 {
+        reg = <0 SPMI_USID>;
+      };
+
+      child@7 {
+        reg = <7 SPMI_USID>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
new file mode 100644
index 0000000000..a1c9698595
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 System Control
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description:
+  The SRAM controller found on most Allwinner devices is represented
+  by a regular node for the SRAM controller itself, with sub-nodes
+  representing the SRAM handled by the SRAM controller.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun4i-a10-sram-controller
+          - allwinner,sun50i-a64-sram-controller
+        deprecated: true
+      - enum:
+          - allwinner,sun4i-a10-system-control
+          - allwinner,sun5i-a13-system-control
+          - allwinner,sun8i-a23-system-control
+          - allwinner,sun8i-h3-system-control
+          - allwinner,sun20i-d1-system-control
+          - allwinner,sun50i-a64-system-control
+          - allwinner,sun50i-h5-system-control
+          - allwinner,sun50i-h616-system-control
+      - items:
+          - enum:
+              - allwinner,suniv-f1c100s-system-control
+              - allwinner,sun7i-a20-system-control
+              - allwinner,sun8i-r40-system-control
+          - const: allwinner,sun4i-a10-system-control
+      - items:
+          - const: allwinner,sun8i-v3s-system-control
+          - const: allwinner,sun8i-h3-system-control
+      - items:
+          - const: allwinner,sun50i-h6-system-control
+          - const: allwinner,sun50i-a64-system-control
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  "^sram@[a-z0-9]+":
+    $ref: /schemas/sram/sram.yaml#
+    unevaluatedProperties: false
+
+    patternProperties:
+      "^sram-section?@[a-f0-9]+$":
+        type: object
+        additionalProperties: false
+
+        properties:
+          reg: true
+
+          compatible:
+            oneOf:
+              - const: allwinner,sun4i-a10-sram-a3-a4
+              - const: allwinner,sun4i-a10-sram-c1
+              - const: allwinner,sun4i-a10-sram-d
+              - const: allwinner,sun50i-a64-sram-c
+              - items:
+                  - enum:
+                      - allwinner,sun5i-a13-sram-a3-a4
+                      - allwinner,sun7i-a20-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
+              - items:
+                  - enum:
+                      - allwinner,sun5i-a13-sram-c1
+                      - allwinner,sun7i-a20-sram-c1
+                      - allwinner,sun8i-a23-sram-c1
+                      - allwinner,sun8i-h3-sram-c1
+                      - allwinner,sun8i-r40-sram-c1
+                      - allwinner,sun50i-a64-sram-c1
+                      - allwinner,sun50i-h5-sram-c1
+                      - allwinner,sun50i-h6-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                  - enum:
+                      - allwinner,suniv-f1c100s-sram-d
+                      - allwinner,sun5i-a13-sram-d
+                      - allwinner,sun7i-a20-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
+              - items:
+                  - const: allwinner,sun50i-h6-sram-c
+                  - const: allwinner,sun50i-a64-sram-c
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    system-control@1c00000 {
+      compatible = "allwinner,sun4i-a10-system-control";
+      reg = <0x01c00000 0x30>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      sram_a: sram@0 {
+        compatible = "mmio-sram";
+        reg = <0x00000000 0xc000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00000000 0xc000>;
+
+        emac_sram: sram-section@8000 {
+          compatible = "allwinner,sun4i-a10-sram-a3-a4";
+          reg = <0x8000 0x4000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
new file mode 100644
index 0000000000..8025a852bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/qcom,imem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IMEM memory region
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm IMEM is dedicated memory region for various debug features and DMA
+  transactions.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-imem
+          - qcom,msm8226-imem
+          - qcom,msm8974-imem
+          - qcom,qcs404-imem
+          - qcom,qdu1000-imem
+          - qcom,sc7180-imem
+          - qcom,sc7280-imem
+          - qcom,sdm630-imem
+          - qcom,sdm845-imem
+          - qcom,sdx55-imem
+          - qcom,sdx65-imem
+          - qcom,sm6375-imem
+          - qcom,sm8450-imem
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
+
+patternProperties:
+  "^pil-reloc@[0-9a-f]+$":
+    $ref: /schemas/remoteproc/qcom,pil-info.yaml#
+    description: Peripheral image loader relocation region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@146bf000 {
+            compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
+            reg = <0 0x146bf000 0 0x1000>;
+            ranges = <0 0 0x146bf000 0x1000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            pil-reloc@94c {
+                compatible = "qcom,pil-reloc-info";
+                reg = <0x94c 0xc8>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
new file mode 100644
index 0000000000..61c784ef7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/qcom,ocmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On Chip Memory (OCMEM) that is present on some Qualcomm Snapdragon SoCs.
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  The On Chip Memory (OCMEM) is typically used by the GPU, camera/video, and
+  audio components on some Snapdragon SoCs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8226-ocmem  # v1.1.0
+      - qcom,msm8974-ocmem  # v1.4.0
+
+  reg:
+    items:
+      - description: Control registers
+      - description: OCMEM address range
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: mem
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: iface
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8974-ocmem
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+    else:
+      properties:
+        clocks:
+          minItems: 1
+        clock-names:
+          minItems: 1
+
+patternProperties:
+  "-sram@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description: A region of reserved memory.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+
+    sram@fdd00000 {
+        compatible = "qcom,msm8974-ocmem";
+
+        reg = <0xfdd00000 0x2000>,
+              <0xfec00000 0x180000>;
+        reg-names = "ctrl",
+                    "mem";
+
+        clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+                 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+        clock-names = "core",
+                      "iface";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
+
+        gmu-sram@0 {
+            reg = <0x0 0x100000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
new file mode 100644
index 0000000000..0922d1f71b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -0,0 +1,300 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic on-chip SRAM
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  Simple IO memory regions to be managed by the genalloc API.
+
+  Each child of the sram node specifies a region of reserved memory. Each
+  child node should use a 'reg' property to specify a specific range of
+  reserved memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node. Unit address (@<address>) should be
+  appended to the name.
+
+properties:
+  $nodename:
+    pattern: "^sram(@.*)?"
+
+  compatible:
+    contains:
+      enum:
+        - mmio-sram
+        - amlogic,meson-gxbb-sram
+        - arm,juno-sram-ns
+        - atmel,sama5d2-securam
+        - nvidia,tegra186-sysram
+        - nvidia,tegra194-sysram
+        - nvidia,tegra234-sysram
+        - qcom,rpm-msg-ram
+        - rockchip,rk3288-pmu-sram
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      A list of phandle and clock specifier pair that controls the single
+      SRAM clock.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+    description:
+      Should translate from local addresses within the sram to bus addresses.
+
+  no-memory-wc:
+    description:
+      The flag indicating, that SRAM memory region has not to be remapped
+      as write combining. WC is used by default.
+    type: boolean
+
+patternProperties:
+  "^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$":
+    type: object
+    description:
+      Each child of the sram node specifies a region of reserved memory.
+    properties:
+      compatible:
+        description:
+          Should contain a vendor specific string in the form
+          <vendor>,[<device>-]<usage>
+        contains:
+          enum:
+            - allwinner,sun4i-a10-sram-a3-a4
+            - allwinner,sun4i-a10-sram-c1
+            - allwinner,sun4i-a10-sram-d
+            - allwinner,sun9i-a80-smp-sram
+            - allwinner,sun50i-a64-sram-c
+            - amlogic,meson8-ao-arc-sram
+            - amlogic,meson8b-ao-arc-sram
+            - amlogic,meson8-smp-sram
+            - amlogic,meson8b-smp-sram
+            - amlogic,meson-gxbb-scp-shmem
+            - amlogic,meson-axg-scp-shmem
+            - arm,juno-scp-shmem
+            - arm,scmi-shmem
+            - arm,scp-shmem
+            - renesas,smp-sram
+            - rockchip,rk3066-smp-sram
+            - samsung,exynos4210-sysram
+            - samsung,exynos4210-sysram-ns
+            - socionext,milbeaut-smp-sram
+            - stericsson,u8500-esram
+
+      reg:
+        description:
+          IO mem address range, relative to the SRAM range.
+        maxItems: 1
+
+      pool:
+        description:
+          Indicates that the particular reserved SRAM area is addressable
+          and in use by another device or devices.
+        type: boolean
+
+      export:
+        description:
+          Indicates that the reserved SRAM area may be accessed outside
+          of the kernel, e.g. by bootloader or userspace.
+        type: boolean
+
+      protect-exec:
+        description: |
+          Same as 'pool' above but with the additional constraint that code
+          will be run from the region and that the memory is maintained as
+          read-only, executable during code execution. NOTE: This region must
+          be page aligned on start and end in order to properly allow
+          manipulation of the page attributes.
+        type: boolean
+
+      label:
+        description:
+          The name for the reserved partition, if omitted, the label is taken
+          from the node name excluding the unit address.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - qcom,rpm-msg-ram
+            - rockchip,rk3288-pmu-sram
+then:
+  required:
+    - "#address-cells"
+    - "#size-cells"
+    - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    sram@5c000000 {
+        compatible = "mmio-sram";
+        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5c000000 0x40000>;
+
+        smp-sram@100 {
+            reg = <0x100 0x50>;
+        };
+
+        device-sram@1000 {
+            reg = <0x1000 0x1000>;
+            pool;
+        };
+
+        exported-sram@20000 {
+            reg = <0x20000 0x20000>;
+            export;
+        };
+    };
+
+  - |
+    // Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+    // of the secondary cores. Once the core gets powered up it executes the
+    // code that is residing at some specific location of the SYSRAM.
+    //
+    // Therefore reserved section sub-nodes have to be added to the mmio-sram
+    // declaration. These nodes are of two types depending upon secure or
+    // non-secure execution environment.
+    sram@2020000 {
+        compatible = "mmio-sram";
+        reg = <0x02020000 0x54000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x02020000 0x54000>;
+
+        smp-sram@0 {
+            compatible = "samsung,exynos4210-sysram";
+            reg = <0x0 0x1000>;
+        };
+
+        smp-sram@53000 {
+            compatible = "samsung,exynos4210-sysram-ns";
+            reg = <0x53000 0x1000>;
+        };
+    };
+
+  - |
+    // Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores.
+    // Once the core gets powered up it executes the code that is residing at a
+    // specific location.
+    //
+    // Therefore a reserved section sub-node has to be added to the mmio-sram
+    // declaration.
+    sram@d9000000 {
+        compatible = "mmio-sram";
+        reg = <0xd9000000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xd9000000 0x20000>;
+
+        smp-sram@1ff80 {
+            compatible = "amlogic,meson8b-smp-sram";
+            reg = <0x1ff80 0x8>;
+        };
+    };
+
+  - |
+    sram@e63c0000 {
+        compatible = "mmio-sram";
+        reg = <0xe63c0000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xe63c0000 0x1000>;
+
+        smp-sram@0 {
+            compatible = "renesas,smp-sram";
+            reg = <0 0x10>;
+        };
+    };
+
+  - |
+    sram@10080000 {
+        compatible = "mmio-sram";
+        reg = <0x10080000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        smp-sram@10080000 {
+            compatible = "rockchip,rk3066-smp-sram";
+            reg = <0x10080000 0x50>;
+        };
+    };
+
+  - |
+    // Rockchip's rk3288 SoC uses the sram of pmu to store the function of
+    // resume from maskrom(the 1st level loader). This is a common use of
+    // the "pmu-sram" because it keeps power even in low power states
+    // in the system.
+    sram@ff720000 {
+      compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+      reg = <0xff720000 0x1000>;
+    };
+
+  - |
+    // Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
+    // primary core (cpu0). Once the core gets powered up it checks if a magic
+    // value is set at a specific location. If it is then the BROM will jump
+    // to the software entry address, instead of executing a standard boot.
+    //
+    // Also there are no "secure-only" properties. The implementation should
+    // check if this SRAM is usable first.
+    sram@20000 {
+        // 256 KiB secure SRAM at 0x20000
+        compatible = "mmio-sram";
+        reg = <0x00020000 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00020000 0x40000>;
+
+        smp-sram@1000 {
+            // This is checked by BROM to determine if
+            // cpu0 should jump to SMP entry vector
+            compatible = "allwinner,sun9i-a80-smp-sram";
+            reg = <0x1000 0x8>;
+        };
+    };
+
+  - |
+    sram@0 {
+        compatible = "mmio-sram";
+        reg = <0x0 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x10000>;
+
+        smp-sram@f100 {
+            compatible = "socionext,milbeaut-smp-sram";
+            reg = <0xf100 0x20>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
new file mode 100644
index 0000000000..88bc94fe1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt
@@ -0,0 +1,24 @@
+* ST SPEAr ADC device driver
+
+Required properties:
+- compatible: Should be "st,spear600-adc"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the ADC interrupt
+- sampling-frequency: Default sampling frequency
+
+Optional properties:
+- vref-external: External voltage reference in milli-volts. If omitted
+  the internal voltage reference will be used.
+- average-samples: Number of samples to generate an average value. If
+  omitted, single data conversion will be used.
+
+Examples:
+
+	adc: adc@d8200000 {
+		compatible = "st,spear600-adc";
+		reg = <0xd8200000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <6>;
+		sampling-frequency = <5000000>;
+		vref-external = <2500>;	/* 2.5V VRef */
+	};
diff --git a/Documentation/devicetree/bindings/submitting-patches.rst b/Documentation/devicetree/bindings/submitting-patches.rst
new file mode 100644
index 0000000000..36a17b250c
--- /dev/null
+++ b/Documentation/devicetree/bindings/submitting-patches.rst
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
+Submitting Devicetree (DT) binding patches
+==========================================
+
+I. For patch submitters
+=======================
+
+  0) Normal patch submission rules from
+     Documentation/process/submitting-patches.rst applies.
+
+  1) The Documentation/ and include/dt-bindings/ portion of the patch should
+     be a separate patch. The preferred subject prefix for binding patches is::
+
+       "dt-bindings: <binding dir>: ..."
+
+     The 80 characters of the subject are precious. It is recommended to not
+     use "Documentation" or "doc" because that is implied. All bindings are
+     docs. Repeating "binding" again should also be avoided.
+
+  2) DT binding files are written in DT schema format using json-schema
+     vocabulary and YAML file format. The DT binding files must pass validation
+     by running::
+
+       make dt_binding_check
+
+     See Documentation/devicetree/bindings/writing-schema.rst for more details
+     about schema and tools setup.
+
+  3) DT binding files should be dual licensed. The preferred license tag is
+     (GPL-2.0-only OR BSD-2-Clause).
+
+  4) Submit the entire series to the devicetree mailinglist at
+
+       devicetree@vger.kernel.org
+
+     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+     all of the DT maintainers.
+
+  5) The Documentation/ portion of the patch should come in the series before
+     the code implementing the binding.
+
+  6) Any compatible strings used in a chip or board DTS file must be
+     previously documented in the corresponding DT binding text file
+     in Documentation/devicetree/bindings.  This rule applies even if
+     the Linux device driver does not yet match on the compatible
+     string.  [ checkpatch will emit warnings if this step is not
+     followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
+     ("checkpatch: add DT compatible string documentation checks"). ]
+
+  7) The wildcard "<chip>" may be used in compatible strings, as in
+     the following example:
+
+         - compatible: Must contain '"nvidia,<chip>-pcie",
+           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
+
+     As in the above example, the known values of "<chip>" should be
+     documented if it is used.
+
+  8) If a documented compatible string is not yet matched by the
+     driver, the documentation should also include a compatible
+     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
+     example above).
+
+  9) Bindings are actively used by multiple projects other than the Linux
+     Kernel, extra care and consideration may need to be taken when making changes
+     to existing bindings.
+
+II. For kernel maintainers
+==========================
+
+  1) If you aren't comfortable reviewing a given binding, reply to it and ask
+     the devicetree maintainers for guidance.  This will help them prioritize
+     which ones to review and which ones are ok to let go.
+
+  2) For driver (not subsystem) bindings: If you are comfortable with the
+     binding, and it hasn't received an Acked-by from the devicetree
+     maintainers after a few weeks, go ahead and take it.
+
+     For subsystem bindings (anything affecting more than a single device),
+     getting a devicetree maintainer to review it is required.
+
+  3) For a series going though multiple trees, the binding patch should be
+     kept with the driver using the binding.
+
+III. Notes
+==========
+
+  0) Please see Documentation/devicetree/bindings/ABI.rst for details
+     regarding devicetree ABI.
+
+  1) This document is intended as a general familiarization with the process as
+     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
+     devicetree maintainers overrules this document.  In that situation, a patch
+     updating this document would be appreciated.
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
new file mode 100644
index 0000000000..fbd4212285
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/allwinner,sun8i-a83t-ths.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SUN8I Thermal Controller
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Yangtao Li <tiny.windzz@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-ths
+      - allwinner,sun8i-h3-ths
+      - allwinner,sun8i-r40-ths
+      - allwinner,sun50i-a64-ths
+      - allwinner,sun50i-a100-ths
+      - allwinner,sun50i-h5-ths
+      - allwinner,sun50i-h6-ths
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: bus
+      - const: mod
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration data for thermal sensors
+
+  nvmem-cell-names:
+    const: calibration
+
+  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
+  "#thermal-sensor-cells":
+    enum:
+      - 0
+      - 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-a100-ths
+              - allwinner,sun50i-h6-ths
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-ths
+
+    then:
+      properties:
+        "#thermal-sensor-cells":
+          const: 0
+
+    else:
+      properties:
+        "#thermal-sensor-cells":
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun8i-r40-ths
+              - allwinner,sun50i-a64-ths
+              - allwinner,sun50i-a100-ths
+              - allwinner,sun50i-h5-ths
+              - allwinner,sun50i-h6-ths
+
+    then:
+      required:
+        - clocks
+        - clock-names
+        - resets
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor@1f04000 {
+         compatible = "allwinner,sun8i-a83t-ths";
+         reg = <0x01f04000 0x100>;
+         interrupts = <0 31 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    thermal-sensor@1c25000 {
+         compatible = "allwinner,sun8i-h3-ths";
+         reg = <0x01c25000 0x400>;
+         clocks = <&ccu 0>, <&ccu 1>;
+         clock-names = "bus", "mod";
+         resets = <&ccu 2>;
+         interrupts = <0 31 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <0>;
+    };
+
+  - |
+    thermal-sensor@5070400 {
+         compatible = "allwinner,sun50i-h6-ths";
+         reg = <0x05070400 0x100>;
+         clocks = <&ccu 0>;
+         clock-names = "bus";
+         resets = <&ccu 2>;
+         interrupts = <0 15 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
new file mode 100644
index 0000000000..12fc4ef048
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
@@ -0,0 +1,33 @@
+Amazon's Annapurna Labs Thermal Sensor
+
+Simple thermal device that allows temperature reading by a single MMIO
+transaction.
+
+Required properties:
+- compatible: "amazon,al-thermal".
+- reg: The physical base address and length of the sensor's registers.
+- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
+
+Example:
+	thermal: thermal {
+		compatible = "amazon,al-thermal";
+		reg = <0x0 0x05002860 0x0 0x1>;
+		#thermal-sensor-cells = <0x1>;
+	};
+
+	thermal-zones {
+		thermal-z0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal 0>;
+			trips {
+				critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
new file mode 100644
index 0000000000..20f8f9b3b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Thermal
+
+maintainers:
+  - Guillaume La Roque <glaroque@baylibre.com>
+
+description: Binding for Amlogic Thermal
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,g12a-cpu-thermal
+          - amlogic,g12a-ddr-thermal
+      - const: amlogic,g12a-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  amlogic,ao-secure:
+    description: phandle to the ao-secure syscon
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - amlogic,ao-secure
+
+additionalProperties: false
+
+examples:
+  - |
+        cpu_temp: temperature-sensor@ff634800 {
+                compatible = "amlogic,g12a-cpu-thermal",
+                             "amlogic,g12a-thermal";
+                reg = <0xff634800 0x50>;
+                interrupts = <0x0 0x24 0x0>;
+                clocks = <&clk 164>;
+                #thermal-sensor-cells = <0>;
+                amlogic,ao-secure = <&sec_AO>;
+        };
+...
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
new file mode 100644
index 0000000000..ab8b8fccc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -0,0 +1,42 @@
+* Marvell Armada 370/375/380/XP thermal management
+
+Required properties:
+
+- compatible: Should be set to one of the following:
+    * marvell,armada370-thermal
+    * marvell,armada375-thermal
+    * marvell,armada380-thermal
+    * marvell,armadaxp-thermal
+    * marvell,armada-ap806-thermal
+    * marvell,armada-ap807-thermal
+    * marvell,armada-cp110-thermal
+
+Note: these bindings are deprecated for AP806/CP110 and should instead
+follow the rules described in:
+Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+
+- reg: Device's register space.
+  Two entries are expected, see the examples below. The first one points
+  to the status register (4B). The second one points to the control
+  registers (8B).
+  Note: The compatibles marvell,armada370-thermal,
+  marvell,armada380-thermal, and marvell,armadaxp-thermal must point to
+  "control MSB/control 1", with size of 4 (deprecated binding), or point
+  to "control LSB/control 0" with size of 8 (current binding). All other
+  compatibles must point to "control LSB/control 0" with size of 8.
+
+Examples:
+
+	/* Legacy bindings */
+	thermal@d0018300 {
+		compatible = "marvell,armada370-thermal";
+		reg = <0xd0018300 0x4
+		       0xd0018304 0x4>;
+	};
+
+	ap_thermal: thermal@6f8084 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x6f808C 0x4>,
+		      <0x6f8084 0x8>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
new file mode 100644
index 0000000000..89a2c32c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-ro-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AVS ring oscillator thermal
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+
+description: |+
+  The thermal node should be the child of a syscon node with the
+  required property:
+
+  - compatible: Should be one of the following:
+                "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  compatible:
+    const: brcm,bcm2711-thermal
+
+  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+        avs-monitor@7d5d2000 {
+                compatible = "brcm,bcm2711-avs-monitor",
+                             "syscon", "simple-mfd";
+                reg = <0x7d5d2000 0xf00>;
+
+                thermal: thermal {
+                        compatible = "brcm,bcm2711-thermal";
+                        #thermal-sensor-cells = <0>;
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
new file mode 100644
index 0000000000..267a0f4235
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-tmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB thermal management
+
+description: Thermal management core, provided by the AVS TMON hardware block.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,avs-tmon-bcm7216
+          - brcm,avs-tmon-bcm7445
+      - const: brcm,avs-tmon
+
+  reg:
+    maxItems: 1
+    description: >
+      Address range for the AVS TMON registers
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: tmon
+
+  "#thermal-sensor-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#thermal-sensor-cells"
+
+examples:
+  - |
+     thermal@f04d1500 {
+          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+          reg = <0xf04d1500 0x28>;
+          interrupts = <0x6>;
+          interrupt-names = "tmon";
+          interrupt-parent = <&avs_host_l2_intc>;
+          #thermal-sensor-cells = <0>;
+     };
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
new file mode 100644
index 0000000000..2b6026d9fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,bcm2835-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 thermal sensor
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-thermal
+      - brcm,bcm2836-thermal
+      - brcm,bcm2837-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#thermal-sensor-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    thermal@7e212000 {
+      compatible = "brcm,bcm2835-thermal";
+      reg = <0x7e212000 0x8>;
+      clocks = <&clocks BCM2835_CLOCK_TSENS>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
new file mode 100644
index 0000000000..fdeb333e01
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Thermal
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Thermal sensor that is part of Northstar's DMU (Device Management Unit).
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: brcm,ns-thermal
+
+  reg:
+    description: PVTMON registers range
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    thermal: thermal@1800c2c0 {
+        compatible = "brcm,ns-thermal";
+        reg = <0x1800c2c0 0x10>;
+        #thermal-sensor-cells = <0>;
+    };
+
+    thermal-zones {
+        cpu-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <1000>;
+            coefficients = <(-556) 418000>;
+            thermal-sensors = <&thermal>;
+
+            trips {
+                cpu-crit {
+                    temperature = <125000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+
+            cooling-maps {
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
new file mode 100644
index 0000000000..3ab330219d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
@@ -0,0 +1,105 @@
+* Broadcom Stingray Thermal
+
+This binding describes thermal sensors that is part of Stingray SoCs.
+
+Required properties:
+- compatible : Must be "brcm,sr-thermal"
+- reg : Memory where tmon data will be available.
+- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
+                  Each bit represents single TMON source.
+- #thermal-sensor-cells : Thermal sensor phandler
+- polling-delay: Max number of milliseconds to wait between polls.
+- thermal-sensors: A list of thermal sensor phandles and specifier.
+                   specifier value is tmon ID and it should be
+                   in correspond with brcm,tmon-mask.
+- temperature: trip temperature threshold in millicelsius.
+
+Example:
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x8f100000 0x100>;
+
+		tmon: tmon@0 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x0 0x40>;
+			brcm,tmon-mask = <0x3f>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		ihost0_thermal: ihost0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 0>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost1_thermal: ihost1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 1>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost2_thermal: ihost2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 2>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost3_thermal: ihost3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 3>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		crmu_thermal: crmu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 4>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		nitro_thermal: nitro-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 5>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/thermal/da9062-thermal.txt b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
new file mode 100644
index 0000000000..e241bb5a55
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/da9062-thermal.txt
@@ -0,0 +1,36 @@
+* Dialog DA9062/61 TJUNC Thermal Module
+
+This module is part of the DA9061/DA9062. For more details about entire
+DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
+
+Junction temperature thermal module uses an interrupt signal to identify
+high THERMAL_TRIP_HOT temperatures for the PMIC device.
+
+Required properties:
+
+- compatible: should be one of the following valid compatible string lines:
+        "dlg,da9061-thermal", "dlg,da9062-thermal"
+        "dlg,da9062-thermal"
+
+Optional properties:
+
+- polling-delay-passive : Specify the polling period, measured in
+    milliseconds, between thermal zone device update checks.
+
+Example: DA9062
+
+	pmic0: da9062@58 {
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			polling-delay-passive = <3000>;
+		};
+	};
+
+Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
+
+	pmic0: da9061@58 {
+		thermal {
+			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
+			polling-delay-passive = <3000>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt
new file mode 100644
index 0000000000..2e1c06fad8
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt
@@ -0,0 +1,44 @@
+* ST-Ericsson DB8500 Thermal
+
+** Thermal node properties:
+
+- compatible : "stericsson,db8500-thermal";
+- reg : address range of the thermal sensor registers;
+- interrupts : interrupts generated from PRCMU;
+- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH";
+- num-trips : number of total trip points, this is required, set it 0 if none,
+  if greater than 0, the following properties must be defined;
+- tripN-temp : temperature of trip point N, should be in ascending order;
+- tripN-type : type of trip point N, should be one of "active" "passive" "hot"
+  "critical";
+- tripN-cdev-num : number of the cooling devices which can be bound to trip
+  point N, this is required if trip point N is defined, set it 0 if none,
+  otherwise the following cooling device names must be defined;
+- tripN-cdev-nameM : name of the No. M cooling device of trip point N;
+
+Usually the num-trips and tripN-*** are separated in board related dts files.
+
+Example:
+thermal@801573c0 {
+	compatible = "stericsson,db8500-thermal";
+	reg = <0x801573c0 0x40>;
+	interrupts = <21 0x4>, <22 0x4>;
+	interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+
+	num-trips = <3>;
+
+	trip0-temp = <75000>;
+	trip0-type = "active";
+	trip0-cdev-num = <1>;
+	trip0-cdev-name0 = "thermal-cpufreq-0";
+
+	trip1-temp = <80000>;
+	trip1-type = "active";
+	trip1-cdev-num = <2>;
+	trip1-cdev-name0 = "thermal-cpufreq-0";
+	trip1-cdev-name1 = "thermal-fan";
+
+	trip2-temp = <85000>;
+	trip2-type = "critical";
+	trip2-cdev-num = <0>;
+}
diff --git a/Documentation/devicetree/bindings/thermal/dove-thermal.txt b/Documentation/devicetree/bindings/thermal/dove-thermal.txt
new file mode 100644
index 0000000000..6f474677d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/dove-thermal.txt
@@ -0,0 +1,18 @@
+* Dove Thermal
+
+This driver is for Dove SoCs which contain a thermal sensor.
+
+Required properties:
+- compatible : "marvell,dove-thermal"
+- reg : Address range of the thermal registers
+
+The reg properties should contain two ranges. The first is for the
+three Thermal Manager registers, while the second range contains the
+Thermal Diode Control Registers.
+
+Example:
+
+	thermal@10078 {
+		compatible = "marvell,dove-thermal";
+		reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
new file mode 100644
index 0000000000..3721c8c8ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Thermal Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-thermal
+      - const: fsl,imx-sc-thermal
+
+  '#thermal-sensor-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor {
+        compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml
new file mode 100644
index 0000000000..f1fc3b0d86
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/generic-adc-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: General Purpose Analog To Digital Converter (ADC) based thermal sensor
+
+maintainers:
+  - Laxman Dewangan <ldewangan@nvidia.com>
+
+description:
+  On some of platforms, thermal sensor like thermistors are connected to
+  one of ADC channel and sensor resistance is read via voltage across the
+  sensor resistor. The voltage read across the sensor is mapped to
+  temperature using voltage-temperature lookup table.
+
+properties:
+  compatible:
+    const: generic-adc-thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: sensor-channel
+
+  temperature-lookup-table:
+    description: |
+      Lookup table to map the relation between ADC value and temperature.
+      When ADC is read, the value is looked up on the table to get the
+      equivalent temperature.
+
+      If not specified, driver assumes the ADC channel gives milliCelsius
+      directly.
+    $ref: /schemas/types.yaml#/definitions/int32-matrix
+    items:
+      items:
+        - description: Temperature in milliCelsius
+        - description: ADC read value
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/thermal/thermal.h>
+
+    thermal-sensor {
+        compatible = "generic-adc-thermal";
+        #thermal-sensor-cells = <0>;
+        io-channels = <&ads1015 1>;
+        io-channel-names = "sensor-channel";
+        temperature-lookup-table = <
+              (-40000) 2578
+              (-39000) 2577
+              (-38000) 2576
+              (-37000) 2575
+              (-36000) 2574
+              (-35000) 2573
+              (-34000) 2572
+              (-33000) 2571
+              (-32000) 2569
+              (-31000) 2568
+              (-30000) 2567
+              /* skip */
+              118000 254
+              119000 247
+              120000 240
+              121000 233
+              122000 226
+              123000 220
+              124000 214
+              125000 208>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
new file mode 100644
index 0000000000..4b19d80e65
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
@@ -0,0 +1,32 @@
+* Temperature Sensor on hisilicon SoCs
+
+** Required properties :
+
+- compatible: "hisilicon,tsensor".
+- reg: physical base address of thermal sensor and length of memory mapped
+  region.
+- interrupt: The interrupt number to the cpu. Defines the interrupt used
+  by /SOCTHERM/tsensor.
+- clock-names: Input clock name, should be 'thermal_clk'.
+- clocks: phandles for clock specified in "clock-names" property.
+- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
+
+Example :
+
+for Hi6220:
+	tsensor: tsensor@0,f7030700 {
+		compatible = "hisilicon,tsensor";
+		reg = <0x0 0xf7030700 0x0 0x1000>;
+		interrupts = <0 7 0x4>;
+		clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
+		clock-names = "thermal_clk";
+		#thermal-sensor-cells = <1>;
+	}
+
+for Hi3660:
+	tsensor: tsensor@fff30000 {
+		compatible = "hisilicon,hi3660-tsensor";
+		reg = <0x0 0xfff30000 0x0 0x1000>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+		#thermal-sensor-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
new file mode 100644
index 0000000000..3aecea7786
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX Thermal
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx6q-tempmon
+          - fsl,imx6sx-tempmon
+          - fsl,imx7d-tempmon
+      - items:
+          - enum:
+              - fsl,imx6sll-tempmon
+              - fsl,imx6ul-tempmon
+          - const: fsl,imx6sx-tempmon
+
+  interrupts:
+    description: |
+      The interrupt output of the controller, i.MX6Q has IRQ_HIGH which
+      will be triggered when temperature is higher than high threshold,
+      i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW
+      and the other is IRQ_PANIC, when temperature is lower than low
+      threshold, IRQ_LOW will be triggered, when temperature is higher
+      than panic threshold, IRQ_PANIC will be triggered, and system can
+      be configured to auto reboot by SRC module for IRQ_PANIC. IRQ_HIGH,
+      IRQ_LOW and IRQ_PANIC share same interrupt output of controller.
+    maxItems: 1
+
+  nvmem-cells:
+    items:
+      - description: Phandle to the calibration data provided by ocotp
+      - description: Phandle to the temperature grade provided by ocotp
+
+  nvmem-cell-names:
+    items:
+      - const: calib
+      - const: temp_grade
+
+  fsl,tempmon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to anatop system controller node.
+
+  fsl,tempmon-data:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Deprecated property, phandle pointer to fuse controller that contains
+      TEMPMON calibration data, e.g. OCOTP on imx6q. The details about
+      calibration data can be found in SoC Reference Manual.
+    deprecated: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - fsl,tempmon
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6sx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    efuse@21bc000 {
+         #address-cells = <1>;
+         #size-cells = <1>;
+         compatible = "fsl,imx6sx-ocotp", "syscon";
+         reg = <0x021bc000 0x4000>;
+         clocks = <&clks IMX6SX_CLK_OCOTP>;
+
+         tempmon_calib: calib@38 {
+             reg = <0x38 4>;
+         };
+
+         tempmon_temp_grade: temp-grade@20 {
+             reg = <0x20 4>;
+         };
+    };
+
+    anatop@20c8000 {
+        compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
+        reg = <0x020c8000 0x1000>;
+        interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+        tempmon {
+             compatible = "fsl,imx6sx-tempmon";
+             interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+             fsl,tempmon = <&anatop>;
+             nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+             nvmem-cell-names = "calib", "temp_grade";
+             clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
new file mode 100644
index 0000000000..d2c1e4573c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/imx8mm-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Mini Thermal
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  i.MX8MM has TMU IP to allow temperature measurement, there are
+  currently two distinct major versions of the IP that is supported
+  by a single driver. The IP versions are named v1 and v2, v1 is
+  for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has
+  2 sensors.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-tmu
+          - fsl,imx8mp-tmu
+      - items:
+          - const: fsl,imx8mn-tmu
+          - const: fsl,imx8mm-tmu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: Phandle to the calibration data provided by ocotp
+
+  nvmem-cell-names:
+    const: calib
+
+  "#thermal-sensor-cells":
+    description: |
+      Number of cells required to uniquely identify the thermal
+      sensors, 0 for ONLY one sensor and 1 for multiple sensors.
+    enum:
+      - 0
+      - 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    thermal-sensor@30260000 {
+         compatible = "fsl,imx8mm-tmu";
+         reg = <0x30260000 0x10000>;
+         clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+         #thermal-sensor-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt b/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
new file mode 100644
index 0000000000..8c0f5eb86d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
@@ -0,0 +1,15 @@
+* Kirkwood Thermal
+
+This version is for Kirkwood 88F8262 & 88F6283 SoCs. Other kirkwoods
+don't contain a thermal sensor.
+
+Required properties:
+- compatible : "marvell,kirkwood-thermal"
+- reg : Address range of the thermal registers
+
+Example:
+
+	thermal@10078 {
+		compatible = "marvell,kirkwood-thermal";
+		reg = <0x10078 0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
new file mode 100644
index 0000000000..7538469997
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/loongson,ls2k-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal sensors on Loongson-2 SoCs
+
+maintainers:
+  - zhanghongchen <zhanghongchen@loongson.cn>
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls2k1000-thermal
+      - items:
+          - enum:
+              - loongson,ls2k2000-thermal
+          - const: loongson,ls2k1000-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    thermal: thermal-sensor@1fe01500 {
+        compatible = "loongson,ls2k1000-thermal";
+        reg = <0x1fe01500 0x30>;
+        interrupt-parent = <&liointc0>;
+        interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
new file mode 100644
index 0000000000..82ed5d4879
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
@@ -0,0 +1,70 @@
+Thermal driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Maxim Semiconductor MAX77620 supports alarm interrupts when its
+die temperature crosses 120C and 140C. These threshold temperatures
+are not configurable. Device does not provide the real temperature
+of die other than just indicating whether temperature is above or
+below threshold level.
+
+Required properties:
+-------------------
+#thermal-sensor-cells:	For more details, please refer to
+			<devicetree/bindings/thermal/thermal-sensor.yaml>
+			The value must be 0.
+
+For more details, please refer generic thermal DT binding document
+<devicetree/bindings/thermal/thermal*.yaml>.
+
+Please refer <devicetree/bindings/mfd/max77620.txt> for mfd DT binding
+document for the MAX77620.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+...
+
+i2c@7000d000 {
+	spmic: max77620@3c {
+		compatible = "maxim,max77620";
+		:::::
+		#thermal-sensor-cells = <0>;
+		:::
+	};
+};
+
+cool_dev: cool-dev {
+	compatible = "cooling-dev";
+	#cooling-cells = <2>;
+};
+
+thermal-zones {
+	PMIC-Die {
+		polling-delay = <0>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&spmic>;
+
+		trips {
+			pmic_die_warn_temp_thresh: hot-die {
+				temperature = <120000>;
+				type = "hot";
+				hysteresis = <0>;
+			};
+
+			pmic_die_cirt_temp_thresh: cirtical-die {
+				temperature = <140000>;
+				type = "critical";
+				hysteresis = <0>;
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_die_warn_temp_thresh>;
+				cooling-device = <&cool_dev THERMAL_NO_LIMIT
+						  THERMAL_NO_LIMIT>;
+				contribution = <100>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
new file mode 100644
index 0000000000..fe9ae4c425
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
+
+maintainers:
+  - Balsam CHIHI <bchihi@baylibre.com>
+
+description: |
+  LVTS is a thermal management architecture composed of three subsystems,
+  a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
+  a Converter - Low Voltage Thermal Sensor converter (LVTS), and
+  a Digital controller (LVTS_CTRL).
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-lvts-ap
+      - mediatek,mt8192-lvts-mcu
+      - mediatek,mt8195-lvts-ap
+      - mediatek,mt8195-lvts-mcu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description: LVTS reset for clearing temporary data on AP/MCU.
+
+  nvmem-cells:
+    minItems: 1
+    items:
+      - description: Calibration eFuse data 1 for LVTS
+      - description: Calibration eFuse data 2 for LVTS
+
+  nvmem-cell-names:
+    minItems: 1
+    items:
+      - const: lvts-calib-data-1
+      - const: lvts-calib-data-2
+
+  "#thermal-sensor-cells":
+    const: 1
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8192-lvts-ap
+              - mediatek,mt8192-lvts-mcu
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 1
+
+        nvmem-cell-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-lvts-ap
+              - mediatek,mt8195-lvts-mcu
+    then:
+      properties:
+        nvmem-cells:
+          minItems: 2
+
+        nvmem-cell-names:
+          minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - nvmem-cells
+  - nvmem-cell-names
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/reset/mt8195-resets.h>
+    #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      lvts_mcu: thermal-sensor@11278000 {
+        compatible = "mediatek,mt8195-lvts-mcu";
+        reg = <0 0x11278000 0 0x1000>;
+        interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+        resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+        nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+        nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+        #thermal-sensor-cells = <1>;
+      };
+    };
+
+    thermal_zones: thermal-zones {
+      cpu0-thermal {
+        polling-delay = <1000>;
+        polling-delay-passive = <250>;
+        thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
+
+        trips {
+          cpu0_alert: trip-alert {
+            temperature = <85000>;
+            hysteresis = <2000>;
+            type = "passive";
+          };
+
+          cpu0_crit: trip-crit {
+            temperature = <100000>;
+            hysteresis = <2000>;
+            type = "critical";
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
new file mode 100644
index 0000000000..ac39c7156f
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -0,0 +1,52 @@
+* Mediatek Thermal
+
+This describes the device tree binding for the Mediatek thermal controller
+which measures the on-SoC temperatures. This device does not have its own ADC,
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
+this device needs phandles to the AUXADC. Also it controls a mux in the
+apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
+is also needed.
+
+Required properties:
+- compatible:
+  - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
+  - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
+  - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
+  - "mediatek,mt7622-thermal" : For MT7622 SoC
+  - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
+  - "mediatek,mt7986-thermal" : For MT7986 SoC
+  - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
+  - "mediatek,mt8365-thermal" : For MT8365 family of SoCs
+  - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
+- reg: Address range of the thermal controller
+- interrupts: IRQ for the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller. required
+                       clocks are:
+		       "therm":	 Main clock needed for register access
+		       "auxadc": The AUXADC clock
+- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
+- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
+- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
+
+Optional properties:
+- resets: Reference to the reset controller controlling the thermal controller.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+               unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
+
+Example:
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt8173-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration_data>;
+		nvmem-cell-names = "calibration-data";
+	};
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
new file mode 100644
index 0000000000..04a2ba1aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
@@ -0,0 +1,380 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra124-soctherm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 SOCTHERM Thermal Management System
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The SOCTHERM IP block contains thermal sensors, support for
+  polled or interrupt-based thermal monitoring, CPU and GPU throttling based
+  on temperature trip points, and handling external overcurrent notifications.
+  It is also used to manage emergency shutdown in an overheating situation.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra124-soctherm
+      - nvidia,tegra132-soctherm
+      - nvidia,tegra210-soctherm
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: module interrupt
+      - description: EDP interrupt
+
+  interrupt-names:
+    items:
+      - const: thermal
+      - const: edp
+
+  clocks:
+    items:
+      - description: thermal sensor clock
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: tsensor
+      - const: soctherm
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: soctherm
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  throttle-cfgs:
+    $ref: thermal-cooling-devices.yaml
+    description: A sub-node which is a container of configuration for each
+      hardware throttle events. These events can be set as cooling devices.
+      Throttle event sub-nodes must be named as "light" or "heavy".
+    unevaluatedProperties: false
+    patternProperties:
+      "^(light|heavy|oc1)$":
+        type: object
+        properties:
+          nvidia,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 1
+            maximum: 100
+            description: Each throttles has its own throttle settings, so the
+              SW need to set priorities for various throttle, the HW arbiter
+              can select the final throttle settings. Bigger value indicates
+              higher priority, In general, higher priority translates to lower
+              target frequency. SW needs to ensure that critical thermal
+              alarms are given higher priority, and ensure that there is no
+              race if priority of two vectors is set to the same value.
+
+          nvidia,cpu-throt-percent:
+            description: This property is for Tegra124 and Tegra210. It is the
+              throttling depth of pulse skippers, it's the percentage
+              throttling.
+            minimum: 0
+            maximum: 100
+
+          nvidia,cpu-throt-level:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: This property is only for Tegra132, it is the level
+              of pulse skippers, which used to throttle clock frequencies. It
+              indicates cpu clock throttling depth, and the depth can be
+              programmed.
+            enum:
+              # none (TEGRA_SOCTHERM_THROT_LEVEL_NONE)
+              - 0
+              # low (TEGRA_SOCTHERM_THROT_LEVEL_LOW)
+              - 1
+              # medium (TEGRA_SOCTHERM_THROT_LEVEL_MED)
+              - 2
+              # high (TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
+              - 3
+
+          nvidia,gpu-throt-level:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: This property is for Tegra124 and Tegra210. It is the
+              level of pulse skippers, which used to throttle clock
+              frequencies. It indicates gpu clock throttling depth and can be
+              programmed to any of the following values which represent a
+              throttling percentage.
+            enum:
+              # none (0%, TEGRA_SOCTHERM_THROT_LEVEL_NONE)
+              - 0
+              # low (50%, TEGRA_SOCTHERM_THROT_LEVEL_LOW)
+              - 1
+              # medium (75%, TEGRA_SOCTHERM_THROT_LEVEL_MED)
+              - 2
+              # high (85%, TEGRA_SOCTHERM_THROT_LEVEL_HIGH)
+              - 3
+
+          # optional
+          # Tegra210 specific and valid only for OCx throttle events
+          nvidia,count-threshold:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Specifies the number of OC events that are required
+              for triggering an interrupt. Interrupts are not triggered if the
+              property is missing. A value of 0 will interrupt on every OC
+              alarm.
+
+          nvidia,polarity-active-low:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description: Configures the polarity of the OC alaram signal. If
+              present, this means assert low, otherwise assert high.
+
+          nvidia,alarm-filter:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Number of clocks to filter event. When the filter
+              expires (which means the OC event has not occurred for a long
+              time), the counter is cleared and filter is rearmed.
+            default: 0
+
+          nvidia,throttle-period-us:
+            description: Specifies the number of microseconds for which
+              throttling is engaged after the OC event is deasserted.
+            default: 0
+
+  # optional
+  nvidia,thermtrips:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      When present, this property specifies the temperature at which the
+      SOCTHERM hardware will assert the thermal trigger signal to the Power
+      Management IC, which can be configured to reset or shutdown the device.
+      It is an array of pairs where each pair represents a tsensor ID followed
+      by a temperature in milli Celcius. In the absence of this property the
+      critical trip point will be used for thermtrip temperature.
+
+      Note:
+      - the "critical" type trip points will be used to set the temperature at
+        which the SOCTHERM hardware will assert a thermal trigger if the
+        "nvidia,thermtrips" property is missing.  When the thermtrips property
+        is present, the breach of a critical trip point is reported back to
+        the thermal framework to implement software shutdown.
+
+      - the "hot" type trip points will be set to SOCTHERM hardware as the
+        throttle temperature.  Once the temperature of this thermal zone is
+        higher than it, it will trigger the HW throttle event.
+    items:
+      items:
+        - description: sensor ID
+          oneOf:
+            - description: CPU sensor
+              const: 0
+            - description: MEM sensor
+              const: 1
+            - description: GPU sensor
+              const: 2
+            - description: PLLX sensor
+              const: 3
+        - description: temperature threshold (in millidegree Celsius)
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#thermal-sensor-cells"
+
+allOf:
+  - $ref: thermal-sensor.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-soctherm
+              - nvidia,tegra210-soctherm
+    then:
+      properties:
+        reg:
+          items:
+            - description: SOCTHERM register set
+            - description: clock and reset controller registers
+
+        reg-names:
+          items:
+            - const: soctherm-reg
+            - const: car-reg
+
+    else:
+      properties:
+        reg:
+          items:
+            - description: SOCTHERM register set
+            - description: CCROC registers
+
+        reg-names:
+          items:
+            - const: soctherm-reg
+            - const: ccroc-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/thermal/tegra124-soctherm.h>
+
+    soctherm@700e2000 {
+        compatible = "nvidia,tegra124-soctherm";
+        reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */
+              <0x60006000 0x400>; /* CAR reg_base */
+        reg-names = "soctherm-reg", "car-reg";
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "thermal", "edp";
+        clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+                 <&tegra_car TEGRA124_CLK_SOC_THERM>;
+        clock-names = "tsensor", "soctherm";
+        resets = <&tegra_car 78>;
+        reset-names = "soctherm";
+
+        #thermal-sensor-cells = <1>;
+
+        nvidia,thermtrips = <TEGRA124_SOCTHERM_SENSOR_CPU 102500>,
+                            <TEGRA124_SOCTHERM_SENSOR_GPU 103000>;
+
+        throttle-cfgs {
+            /*
+             * When the "heavy" cooling device triggered,
+             * the HW will skip cpu clock's pulse in 85% depth,
+             * skip gpu clock's pulse in 85% level
+             */
+            heavy {
+                nvidia,priority = <100>;
+                nvidia,cpu-throt-percent = <85>;
+                nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+                #cooling-cells = <2>;
+            };
+
+            /*
+             * When the "light" cooling device triggered,
+             * the HW will skip cpu clock's pulse in 50% depth,
+             * skip gpu clock's pulse in 50% level
+             */
+            light {
+                nvidia,priority = <80>;
+                nvidia,cpu-throt-percent = <50>;
+                nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_LOW>;
+
+                #cooling-cells = <2>;
+            };
+
+            /*
+             * If these two devices are triggered in same time, the HW throttle
+             * arbiter will select the highest priority as the final throttle
+             * settings to skip cpu pulse.
+             */
+
+            oc1 {
+                nvidia,priority = <50>;
+                nvidia,polarity-active-low;
+                nvidia,count-threshold = <100>;
+                nvidia,alarm-filter = <5100000>;
+                nvidia,throttle-period-us = <0>;
+                nvidia,cpu-throt-percent = <75>;
+                nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>;
+            };
+        };
+    };
+
+  # referring to Tegra132's "reg", "reg-names" and "throttle-cfgs"
+  - |
+    thermal-sensor@700e2000 {
+        compatible = "nvidia,tegra132-soctherm";
+        reg = <0x700e2000 0x600>, /* SOC_THERM reg_base */
+              <0x70040000 0x200>; /* CCROC reg_base */
+        reg-names = "soctherm-reg", "ccroc-reg";
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "thermal", "edp";
+        clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+                 <&tegra_car TEGRA124_CLK_SOC_THERM>;
+        clock-names = "tsensor", "soctherm";
+        resets = <&tegra_car 78>;
+        reset-names = "soctherm";
+        #thermal-sensor-cells = <1>;
+
+        throttle-cfgs {
+            /*
+             * When the "heavy" cooling device triggered,
+             * the HW will skip cpu clock's pulse in HIGH level
+             */
+            heavy {
+                nvidia,priority = <100>;
+                nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+                #cooling-cells = <2>;
+            };
+
+            /*
+             * When the "light" cooling device triggered,
+             * the HW will skip cpu clock's pulse in MED level
+             */
+            light {
+                nvidia,priority = <80>;
+                nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>;
+
+                #cooling-cells = <2>;
+            };
+
+            /*
+             * If these two devices are triggered in same time, the HW throttle
+             * arbiter will select the highest priority as the final throttle
+             * settings to skip cpu pulse.
+             */
+        };
+    };
+
+  # referring to thermal sensors
+  - |
+    thermal-zones {
+        cpu-thermal {
+            polling-delay-passive = <1000>;
+            polling-delay = <1000>;
+
+            thermal-sensors = <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+            trips {
+                cpu_shutdown_trip: shutdown-trip {
+                    temperature = <102500>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
+
+                cpu_throttle_trip: throttle-trip {
+                    temperature = <100000>;
+                    hysteresis = <1000>;
+                    type = "hot";
+                };
+            };
+
+            cooling-maps {
+                map0 {
+                    trip = <&cpu_throttle_trip>;
+                    cooling-device = <&throttle_heavy 1 1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
new file mode 100644
index 0000000000..c91fd07e40
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra186-bpmp-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP thermal sensor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186, the BPMP (Boot and Power Management Processor) implements
+  an interface that is used to read system temperatures, including CPU
+  cluster and GPU temperatures. This binding describes the thermal
+  sensor that is exposed by BPMP.
+
+  The BPMP thermal node must be located directly inside the main BPMP
+  node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the
+  BPMP binding.
+
+  This node represents a thermal sensor. See
+
+    Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+
+  for details of the core thermal binding.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-bpmp-thermal
+      - nvidia,tegra194-bpmp-thermal
+
+  '#thermal-sensor-cells':
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of cells needed in the phandle specifier to
+      identify a given sensor. Must be 1 and the single cell specifies
+      the sensor index.
+    const: 1
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
new file mode 100644
index 0000000000..a35da257b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/nvidia,tegra30-tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 Thermal Sensor
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  TSENSOR provides thermal and voltage sensors which monitor temperature
+  and voltage of the chip. Sensors are placed across the die to gauge the
+  temperature of the whole chip. The TSENSOR module:
+
+    Generates an interrupt to SW to lower temperature via DVFS on reaching
+    a certain thermal/voltage threshold.
+
+    Generates a signal to the CAR to reduce CPU frequency by half on reaching
+    a certain thermal/voltage threshold.
+
+    Generates a signal to the PMC when the temperature reaches dangerously high
+    levels to reset the chip and sets a flag in the PMC.
+
+  TSENSOR has two channels which monitor two different spots of the SoC.
+
+properties:
+  compatible:
+    const: nvidia,tegra30-tsensor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+  assigned-clocks: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor@70014000 {
+      compatible = "nvidia,tegra30-tsensor";
+      reg = <0x70014000 0x500>;
+      interrupts = <0 102 4>;
+      clocks = <&clk 100>;
+      resets = <&rst 100>;
+
+      #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
new file mode 100644
index 0000000000..5f08b6e59b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPNP PMIC Temperature Alarm
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+  that utilize the Qualcomm SPMI implementation. These peripherals provide an
+  interrupt signal and status register to identify high PMIC die temperature.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: qcom,spmi-temp-alarm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: ADC channel, which reports chip die temperature
+
+  io-channel-names:
+    items:
+      - const: thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8350_temp_alarm: temperature-sensor@a00 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0xa00>;
+            interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
+
+    thermal-zones {
+        pm8350_thermal: pm8350c-thermal {
+            polling-delay-passive = <100>;
+            polling-delay = <0>;
+            thermal-sensors = <&pm8350_temp_alarm>;
+
+            trips {
+                pm8350_trip0: trip0 {
+                    temperature = <95000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                pm8350_crit: pm8350c-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
new file mode 100644
index 0000000000..5ff72ce5c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Limits Management Hardware(LMh)
+
+maintainers:
+  - Thara Gopinath <thara.gopinath@gmail.com>
+
+description:
+  Limits Management Hardware(LMh) is a hardware infrastructure on some
+  Qualcomm SoCs that can enforce temperature and current limits as
+  programmed by software for certain IPs like CPU.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8180x-lmh
+      - qcom,sdm845-lmh
+      - qcom,sm8150-lmh
+
+  reg:
+    items:
+      - description: core registers
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  cpus:
+    description:
+      phandle of the first cpu in the LMh cluster
+    maxItems: 1
+
+  qcom,lmh-temp-arm-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the LMh thermal
+      FSM is engaged.
+
+  qcom,lmh-temp-low-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the state machine
+      will attempt to remove frequency throttling.
+
+  qcom,lmh-temp-high-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the state machine
+      will attempt to throttle the frequency.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - cpus
+  - qcom,lmh-temp-arm-millicelsius
+  - qcom,lmh-temp-low-millicelsius
+  - qcom,lmh-temp-high-millicelsius
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lmh@17d70800 {
+      compatible = "qcom,sdm845-lmh";
+      reg = <0x17d70800 0x400>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+      cpus = <&CPU4>;
+      qcom,lmh-temp-arm-millicelsius = <65000>;
+      qcom,lmh-temp-low-millicelsius = <94500>;
+      qcom,lmh-temp-high-millicelsius = <95000>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
new file mode 100644
index 0000000000..01253d58bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,spmi-adc-tm-hc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+    enum:
+      - 256
+      - 512
+      - 1024
+    default: 1024
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-7]$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+        minimum: 0
+        maximum: 7
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time-us:
+        description: Time between AMUX getting configured and the ADC starting conversion.
+        enum: [0, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 6000, 8000, 10000]
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. The configuration for this node is to know the
+          pre-determined ratio and use it for post scaling. It is a pair of
+          integers, denoting the numerator and denominator of the fraction by
+          which input signal is multiplied. For example, <1 3> indicates the
+          signal is scaled down to 1/3 of its value before ADC measurement.  If
+          property is not found default value depending on chip will be used.
+        items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+    required:
+      - reg
+      - io-channels
+
+    additionalProperties:
+      false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8998_adc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc-rev2";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            channel@4c {
+                reg = <ADC5_XO_THERM_100K_PU>;
+            };
+        };
+
+        pm8998_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm-hc";
+            reg = <0x3400>;
+            interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            thermistor@1 {
+                reg = <1>;
+                io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
new file mode 100644
index 0000000000..3c81def03c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,spmi-adc-tm5
+      - qcom,spmi-adc-tm5-gen2
+      - qcom,adc-tm7 # Incomplete / subject to change
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+            Not applicable for Gen2 ADC_TM peripheral.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+            Not applicable for Gen2 ADC_TM peripheral.
+    enum:
+      - 250
+      - 420
+      - 840
+    default: 840
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-7]$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+        minimum: 0
+        maximum: 7
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time-us:
+        description: Time between AMUX getting configured and the ADC starting conversion.
+        enum: [15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000]
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. The configuration for this node is to know the
+          pre-determined ratio and use it for post scaling. It is a pair of
+          integers, denoting the numerator and denominator of the fraction by
+          which input signal is multiplied. For example, <1 3> indicates the
+          signal is scaled down to 1/3 of its value before ADC measurement.  If
+          property is not found default value depending on chip will be used.
+        items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Number of samples to be used for measurement.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 1
+          - 2
+          - 4
+          - 8
+          - 16
+        default: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: This parameter is used to decrease ADC sampling rate.
+          Quicker measurements can be made by reducing decimation ratio.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 85
+          - 340
+          - 1360
+        default: 1360
+
+    required:
+      - reg
+      - io-channels
+
+    additionalProperties:
+      false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5
+
+    then:
+      patternProperties:
+        "^([-a-z0-9]*)@[0-7]$":
+          properties:
+            qcom,decimation: false
+            qcom,avg-samples: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5-gen2
+
+    then:
+      properties:
+        qcom,avg-samples: false
+        qcom,decimation: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8150b_adc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc5";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            channel@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "conn_therm";
+            };
+        };
+
+        pm8150b_adc_tm: adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            conn-therm@0 {
+                reg = <0>;
+                io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmk8350_vadc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            channel@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "xo_therm";
+            };
+
+            channel@147 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "conn_therm";
+            };
+        };
+
+        pmk8350_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm5-gen2";
+            reg = <0x3400>;
+            interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmk8350-xo-therm@0 {
+                reg = <0>;
+                io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,decimation = <340>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+
+            conn-therm@1 {
+                reg = <1>;
+                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+                qcom,avg-samples = <2>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
new file mode 100644
index 0000000000..27e9e16e64
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -0,0 +1,412 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM SoC Temperature Sensor (TSENS)
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  QCOM SoCs have TSENS IP to allow temperature measurement. There are currently
+  three distinct major versions of the IP that is supported by a single driver.
+  The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
+  everything before v1 when there was no versioning information.
+
+properties:
+  compatible:
+    oneOf:
+      - description: msm8960 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+              - qcom,msm8960-tsens
+
+      - description: v0.1 of TSENS
+        items:
+          - enum:
+              - qcom,mdm9607-tsens
+              - qcom,msm8226-tsens
+              - qcom,msm8909-tsens
+              - qcom,msm8916-tsens
+              - qcom,msm8939-tsens
+              - qcom,msm8974-tsens
+          - const: qcom,tsens-v0_1
+
+      - description: v1 of TSENS
+        items:
+          - enum:
+              - qcom,msm8956-tsens
+              - qcom,msm8976-tsens
+              - qcom,qcs404-tsens
+          - const: qcom,tsens-v1
+
+      - description: v2 of TSENS
+        items:
+          - enum:
+              - qcom,msm8953-tsens
+              - qcom,msm8996-tsens
+              - qcom,msm8998-tsens
+              - qcom,qcm2290-tsens
+              - qcom,sc7180-tsens
+              - qcom,sc7280-tsens
+              - qcom,sc8180x-tsens
+              - qcom,sc8280xp-tsens
+              - qcom,sdm630-tsens
+              - qcom,sdm845-tsens
+              - qcom,sm6115-tsens
+              - qcom,sm6350-tsens
+              - qcom,sm6375-tsens
+              - qcom,sm8150-tsens
+              - qcom,sm8250-tsens
+              - qcom,sm8350-tsens
+              - qcom,sm8450-tsens
+              - qcom,sm8550-tsens
+          - const: qcom,tsens-v2
+
+      - description: v2 of TSENS with combined interrupt
+        enum:
+          - qcom,ipq8074-tsens
+
+      - description: v2 of TSENS with combined interrupt
+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
+
+  reg:
+    items:
+      - description: TM registers
+      - description: SROT registers
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+  nvmem-cells:
+    oneOf:
+      - minItems: 1
+        maxItems: 2
+        description:
+          Reference to an nvmem node for the calibration data
+      - minItems: 5
+        maxItems: 35
+        description: |
+          Reference to nvmem cells for the calibration mode, two calibration
+          bases and two cells per each sensor
+        # special case for msm8974 / apq8084
+      - maxItems: 51
+        description: |
+          Reference to nvmem cells for the calibration mode, two calibration
+          bases and two cells per each sensor, main and backup copies, plus use_backup cell
+
+  nvmem-cell-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: calib
+          - enum:
+              - calib_backup
+              - calib_sel
+      - minItems: 5
+        items:
+          - const: mode
+          - const: base1
+          - const: base2
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+          - pattern: '^s[0-9]+_p1$'
+          - pattern: '^s[0-9]+_p2$'
+        # special case for msm8974 / apq8084
+      - items:
+          - const: mode
+          - const: base1
+          - const: base2
+          - const: use_backup
+          - const: mode_backup
+          - const: base1_backup
+          - const: base2_backup
+          - const: s0_p1
+          - const: s0_p2
+          - const: s1_p1
+          - const: s1_p2
+          - const: s2_p1
+          - const: s2_p2
+          - const: s3_p1
+          - const: s3_p2
+          - const: s4_p1
+          - const: s4_p2
+          - const: s5_p1
+          - const: s5_p2
+          - const: s6_p1
+          - const: s6_p2
+          - const: s7_p1
+          - const: s7_p2
+          - const: s8_p1
+          - const: s8_p2
+          - const: s9_p1
+          - const: s9_p2
+          - const: s10_p1
+          - const: s10_p2
+          - const: s0_p1_backup
+          - const: s0_p2_backup
+          - const: s1_p1_backup
+          - const: s1_p2_backup
+          - const: s2_p1_backup
+          - const: s2_p2_backup
+          - const: s3_p1_backup
+          - const: s3_p2_backup
+          - const: s4_p1_backup
+          - const: s4_p2_backup
+          - const: s5_p1_backup
+          - const: s5_p2_backup
+          - const: s6_p1_backup
+          - const: s6_p2_backup
+          - const: s7_p1_backup
+          - const: s7_p2_backup
+          - const: s8_p1_backup
+          - const: s8_p2_backup
+          - const: s9_p1_backup
+          - const: s9_p2_backup
+          - const: s10_p1_backup
+          - const: s10_p2_backup
+
+  "#qcom,sensors":
+    description:
+      Number of sensors enabled on this platform
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 16
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8064-tsens
+              - qcom,msm8960-tsens
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
+        interrupt-names:
+          items:
+            - const: uplow
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,tsens-v2
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
+            - description: Interrupt if critical threshold crossed
+        interrupt-names:
+          items:
+            - const: uplow
+            - const: critical
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-tsens
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper, lower or critical thresholds crossed
+        interrupt-names:
+          items:
+            - const: combined
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-tsens
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 1 (new calbiration data: for pre v1 IP):
+    thermal-sensor@4a9000 {
+        compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+        reg = <0x4a9000 0x1000>, /* TM */
+              <0x4a8000 0x1000>; /* SROT */
+
+        nvmem-cells = <&tsens_mode>,
+                      <&tsens_base1>, <&tsens_base2>,
+                      <&tsens_s0_p1>, <&tsens_s0_p2>,
+                      <&tsens_s1_p1>, <&tsens_s1_p2>,
+                      <&tsens_s2_p1>, <&tsens_s2_p2>,
+                      <&tsens_s4_p1>, <&tsens_s4_p2>,
+                      <&tsens_s5_p1>, <&tsens_s5_p2>;
+        nvmem-cell-names = "mode",
+                           "base1", "base2",
+                           "s0_p1", "s0_p2",
+                           "s1_p1", "s1_p2",
+                           "s2_p1", "s2_p2",
+                           "s4_p1", "s4_p2",
+                           "s5_p1", "s5_p2";
+
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <5>;
+        #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 1 (legacy: for pre v1 IP):
+    tsens1: thermal-sensor@4a9000 {
+           compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+           reg = <0x4a9000 0x1000>, /* TM */
+                 <0x4a8000 0x1000>; /* SROT */
+
+           nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+           nvmem-cell-names = "calib", "calib_sel";
+
+           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "uplow";
+
+           #qcom,sensors = <5>;
+           #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 2 (for any platform containing v1 of the TSENS IP):
+    tsens2: thermal-sensor@4a9000 {
+          compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+          reg = <0x004a9000 0x1000>, /* TM */
+                <0x004a8000 0x1000>; /* SROT */
+
+          nvmem-cells = <&tsens_caldata>;
+          nvmem-cell-names = "calib";
+
+          interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "uplow";
+
+          #qcom,sensors = <10>;
+          #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 3 (for any platform containing v2 of the TSENS IP):
+    tsens3: thermal-sensor@c263000 {
+           compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+           reg = <0xc263000 0x1ff>,
+                 <0xc222000 0x1ff>;
+
+           interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "uplow", "critical";
+
+           #qcom,sensors = <13>;
+           #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 4 (for any IPQ8074 based SoC-s):
+    tsens4: thermal-sensor@4a9000 {
+           compatible = "qcom,ipq8074-tsens";
+           reg = <0x4a9000 0x1000>,
+                 <0x4a8000 0x1000>;
+
+           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "combined";
+
+           #qcom,sensors = <16>;
+           #thermal-sensor-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
new file mode 100644
index 0000000000..1457440272
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    description: |
+      The version of the device is determined by the TMU IP Block Revision
+      Register (IPBRR0) at offset 0x0BF8.
+      Table of correspondences between IPBRR0 values and example chips:
+            Value           Device
+            ----------      -----
+            0x01900102      T1040
+    enum:
+      - fsl,qoriq-tmu
+      - fsl,imx8mq-tmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,tmu-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      The values to be programmed into TTRnCR, as specified by the SoC
+      reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
+    maxItems: 4
+
+  fsl,tmu-calibration:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      A list of cell pairs containing temperature calibration data, as
+      specified by the SoC reference manual. The first cell of each pair
+      is the value to be written to TTCFGR, and the second is the value
+      to be written to TSCFGR.
+    items:
+      items:
+        - description: value for TTCFGR
+        - description: value for TSCFGR
+    minItems: 1
+    maxItems: 64
+
+  little-endian:
+    description: |
+      boolean, if present, the TMU registers are little endian. If absent,
+      the default is big endian.
+    type: boolean
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,tmu-range
+  - fsl,tmu-calibration
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    tmu@f0000 {
+        compatible = "fsl,qoriq-tmu";
+        reg = <0xf0000 0x1000>;
+        interrupts = <18 2 0 0>;
+        fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+        fsl,tmu-calibration = <0x00000000 0x00000025>,
+                              <0x00000001 0x00000028>,
+                              <0x00000002 0x0000002d>,
+                              <0x00000003 0x00000031>,
+                              <0x00000004 0x00000036>,
+                              <0x00000005 0x0000003a>,
+                              <0x00000006 0x00000040>,
+                              <0x00000007 0x00000044>,
+                              <0x00000008 0x0000004a>,
+                              <0x00000009 0x0000004f>,
+                              <0x0000000a 0x00000054>,
+                              <0x00010000 0x0000000d>,
+                              <0x00010001 0x00000013>,
+                              <0x00010002 0x00000019>,
+                              <0x00010003 0x0000001f>,
+                              <0x00010004 0x00000025>,
+                              <0x00010005 0x0000002d>,
+                              <0x00010006 0x00000033>,
+                              <0x00010007 0x00000043>,
+                              <0x00010008 0x0000004b>,
+                              <0x00010009 0x00000053>,
+                              <0x00020000 0x00000010>,
+                              <0x00020001 0x00000017>,
+                              <0x00020002 0x0000001f>,
+                              <0x00020003 0x00000029>,
+                              <0x00020004 0x00000031>,
+                              <0x00020005 0x0000003c>,
+                              <0x00020006 0x00000042>,
+                              <0x00020007 0x0000004d>,
+                              <0x00020008 0x00000056>,
+                              <0x00030000 0x00000012>,
+                              <0x00030001 0x0000001d>;
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
new file mode 100644
index 0000000000..ecf276fd15
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-gen3-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Thermal Sensor
+
+description:
+  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
+  control the thermal sensors (THS) which are the analog circuits for
+  measuring temperature (Tj) inside the LSI.
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a774a1-thermal # RZ/G2M
+      - renesas,r8a774b1-thermal # RZ/G2N
+      - renesas,r8a774e1-thermal # RZ/G2H
+      - renesas,r8a7795-thermal  # R-Car H3
+      - renesas,r8a7796-thermal  # R-Car M3-W
+      - renesas,r8a77961-thermal # R-Car M3-W+
+      - renesas,r8a77965-thermal # R-Car M3-N
+      - renesas,r8a77980-thermal # R-Car V3H
+      - renesas,r8a779a0-thermal # R-Car V3U
+      - renesas,r8a779f0-thermal # R-Car S4-8
+      - renesas,r8a779g0-thermal # R-Car V4H
+
+  reg: true
+
+  interrupts:
+    items:
+      - description: TEMP1 interrupt
+      - description: TEMP2 interrupt
+      - description: TEMP3 interrupt
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - "#thermal-sensor-cells"
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r8a779a0-thermal
+then:
+  properties:
+    reg:
+      items:
+        - description: TSC0 registers
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+        - description: TSC4 registers
+else:
+  properties:
+    reg:
+      minItems: 2
+      items:
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+        - description: TSC4 registers
+  if:
+    not:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a779f0-thermal
+              - renesas,r8a779g0-thermal
+  then:
+    required:
+      - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    tsc: thermal@e6198000 {
+            compatible = "renesas,r8a7795-thermal";
+            reg = <0xe6198000 0x100>,
+                  <0xe61a0000 0x100>,
+                  <0xe61a8000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 522>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 522>;
+            #thermal-sensor-cells = <1>;
+    };
+
+    thermal-zones {
+            sensor_thermal: sensor-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+                    thermal-sensors = <&tsc 0>;
+
+                    trips {
+                            sensor1_crit: sensor1-crit {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+    };
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    tsc_r8a779a0: thermal@e6190000 {
+            compatible = "renesas,r8a779a0-thermal";
+            reg = <0xe6190000 0x200>,
+                  <0xe6198000 0x200>,
+                  <0xe61a0000 0x200>,
+                  <0xe61a8000 0x200>,
+                  <0xe61b0000 0x200>;
+            clocks = <&cpg CPG_MOD 919>;
+            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+            resets = <&cpg 919>;
+            #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
new file mode 100644
index 0000000000..119998d10f
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rcar-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Thermal
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,thermal-r8a73a4 # R-Mobile APE6
+              - renesas,thermal-r8a7779 # R-Car H1
+          - const: renesas,rcar-thermal # Generic without thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a7742 # RZ/G1H
+              - renesas,thermal-r8a7743 # RZ/G1M
+              - renesas,thermal-r8a7744 # RZ/G1N
+          - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a7790 # R-Car H2
+              - renesas,thermal-r8a7791 # R-Car M2-W
+              - renesas,thermal-r8a7792 # R-Car V2H
+              - renesas,thermal-r8a7793 # R-Car M2-N
+          - const: renesas,rcar-gen2-thermal # Generic thermal-zone
+          - const: renesas,rcar-thermal # Generic without thermal-zone
+      - items:
+          - enum:
+              - renesas,thermal-r8a774c0 # RZ/G2E
+              - renesas,thermal-r8a77970 # R-Car V3M
+              - renesas,thermal-r8a77990 # R-Car E3
+              - renesas,thermal-r8a77995 # R-Car D3
+  reg:
+    description:
+      Address ranges of the thermal registers. If more then one range is given
+      the first one must be the common registers followed by each sensor
+      according to the datasheet.
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,thermal-r8a73a4 # R-Mobile APE6
+                - renesas,thermal-r8a7779 # R-Car H1
+    then:
+      required:
+        - resets
+        - '#thermal-sensor-cells'
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,thermal-r8a7779 # R-Car H1
+    then:
+      required:
+        - interrupts
+        - clocks
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  # Example (non interrupt support)
+  - |
+    thermal@ffc48000 {
+            compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+            reg = <0xffc48000 0x38>;
+    };
+
+  # Example (interrupt support)
+  - |
+    #include <dt-bindings/clock/r8a73a4-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    thermal@e61f0000 {
+            compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+            reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+                  <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+            power-domains = <&pd_c5>;
+    };
+
+  # Example (with thermal-zone)
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    thermal: thermal@e61f0000 {
+      compatible = "renesas,thermal-r8a7790",
+                   "renesas,rcar-gen2-thermal",
+                   "renesas,rcar-thermal";
+            reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 522>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 522>;
+            #thermal-sensor-cells = <0>;
+    };
+
+    thermal-zones {
+            cpu_thermal: cpu-thermal {
+                    polling-delay-passive = <1000>;
+                    polling-delay = <5000>;
+
+                    thermal-sensors = <&thermal>;
+
+                    trips {
+                            cpu-crit {
+                                    temperature = <115000>;
+                                    hysteresis = <0>;
+                                    type = "critical";
+                            };
+                    };
+                    cooling-maps {
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
new file mode 100644
index 0000000000..55f8ec0bec
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rockchip-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sensor ADC (TSADC) on Rockchip SoCs
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-tsadc
+      - rockchip,rk3228-tsadc
+      - rockchip,rk3288-tsadc
+      - rockchip,rk3328-tsadc
+      - rockchip,rk3368-tsadc
+      - rockchip,rk3399-tsadc
+      - rockchip,rk3568-tsadc
+      - rockchip,rk3588-tsadc
+      - rockchip,rv1108-tsadc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tsadc
+      - const: apb_pclk
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: tsadc-apb
+      - const: tsadc
+      - const: tsadc-phy
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  rockchip,grf:
+    description: The phandle of the syscon node for the general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  rockchip,hw-tshut-temp:
+    description: The hardware-controlled shutdown temperature value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rockchip,hw-tshut-mode:
+    description: The hardware-controlled shutdown mode 0:CRU 1:GPIO.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  rockchip,hw-tshut-polarity:
+    description: The hardware-controlled active polarity 0:LOW 1:HIGH.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    tsadc: tsadc@ff280000 {
+        compatible = "rockchip,rk3288-tsadc";
+        reg = <0xff280000 0x100>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+        clock-names = "tsadc", "apb_pclk";
+        resets = <&cru SRST_TSADC>;
+        reset-names = "tsadc-apb";
+        #thermal-sensor-cells = <1>;
+        rockchip,hw-tshut-temp = <95000>;
+        rockchip,hw-tshut-mode = <0>;
+        rockchip,hw-tshut-polarity = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
new file mode 100644
index 0000000000..03f4b926e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/rzg2l-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Thermal Sensor Unit
+
+description:
+  On RZ/G2L SoCs, the thermal sensor unit (TSU) measures the
+  temperature(Tj) inside the LSI.
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g043-tsu # RZ/G2UL and RZ/Five
+          - renesas,r9a07g044-tsu # RZ/G2{L,LC}
+          - renesas,r9a07g054-tsu # RZ/V2L
+      - const: renesas,rzg2l-tsu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    tsu: thermal@10059400 {
+            compatible = "renesas,r9a07g044-tsu",
+                         "renesas,rzg2l-tsu";
+            reg = <0x10059400 0x400>;
+            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+            resets = <&cpg R9A07G044_TSU_PRESETN>;
+            power-domains = <&cpg>;
+            #thermal-sensor-cells = <1>;
+    };
+
+    thermal-zones {
+            cpu-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+                    thermal-sensors = <&tsu 0>;
+
+                    trips {
+                            sensor_crit: sensor-crit {
+                                    temperature = <125000>;
+                                    hysteresis = <1000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
new file mode 100644
index 0000000000..1344df708e
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/samsung,exynos-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Thermal Management Unit (TMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  For multi-instance tmu each instance should have an alias correctly numbered
+  in "aliases" node.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-tmu
+      - samsung,exynos4412-tmu
+      - samsung,exynos4210-tmu
+      - samsung,exynos5250-tmu
+      - samsung,exynos5260-tmu
+        # For TMU channel 0, 1 on Exynos5420:
+      - samsung,exynos5420-tmu
+        # For TMU channels 2, 3 and 4 of Exynos5420:
+      - samsung,exynos5420-tmu-ext-triminfo
+      - samsung,exynos5433-tmu
+      - samsung,exynos7-tmu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    description: |
+      The Exynos TMU supports generating interrupts when reaching given
+      temperature thresholds. Number of supported thermal trip points depends
+      on the SoC (only first trip points defined in DT will be configured)::
+       - most of SoC: 4
+       - samsung,exynos5433-tmu: 8
+       - samsung,exynos7-tmu: 8
+    maxItems: 1
+
+  reg:
+    items:
+      - description: TMU instance registers.
+      - description: |
+          Shared TMU registers.
+
+          Note:: On Exynos5420, the TRIMINFO register is misplaced for TMU
+          channels 2, 3 and 4 Use "samsung,exynos5420-tmu-ext-triminfo" in
+          cases, there is a misplaced register, also provide clock to access
+          that base.
+          TRIMINFO at 0x1006c000 contains data for TMU channel 3
+          TRIMINFO at 0x100a0000 contains data for TMU channel 4
+          TRIMINFO at 0x10068000 contains data for TMU channel 2
+    minItems: 1
+
+  '#thermal-sensor-cells': true
+
+  vtmu-supply:
+    description: The regulator node supplying voltage to TMU.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-tmu-ext-triminfo
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional clock to access the shared registers (e.g. TRIMINFO) of TMU
+                channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_triminfo_apbif
+        reg:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-tmu
+              - samsung,exynos7-tmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional special clock for functional operation of TMU channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_sclk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-tmu
+              - samsung,exynos4412-tmu
+              - samsung,exynos4210-tmu
+              - samsung,exynos5250-tmu
+              - samsung,exynos5260-tmu
+              - samsung,exynos5420-tmu
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    tmu@100c0000 {
+        compatible = "samsung,exynos4412-tmu";
+        reg = <0x100C0000 0x100>;
+        interrupt-parent = <&combiner>;
+        interrupts = <2 4>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock CLK_TMU_APBIF>;
+        clock-names = "tmu_apbif";
+        vtmu-supply = <&ldo10_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10068000 {
+        compatible = "samsung,exynos5420-tmu-ext-triminfo";
+        reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock 318>, <&clock 318>; /* CLK_TMU */
+        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+        vtmu-supply = <&ldo7_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10060000 {
+        compatible = "samsung,exynos5433-tmu";
+        reg = <0x10060000 0x200>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&cmu_peris 3>, /* CLK_PCLK_TMU0_APBIF */
+                 <&cmu_peris 35>; /* CLK_SCLK_TMU0 */
+        clock-names = "tmu_apbif", "tmu_sclk";
+        vtmu-supply = <&ldo3_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
new file mode 100644
index 0000000000..6f975821fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier thermal monitor
+
+description: |
+  This describes the devicetree bindings for thermal monitor supported by
+  PVT(Process, Voltage and Temperature) monitoring unit implemented on
+  Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pxs2-thermal
+      - socionext,uniphier-ld20-thermal
+      - socionext,uniphier-pxs3-thermal
+      - socionext,uniphier-nx1-thermal
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+  socionext,tmod-calibration:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description:
+      A pair of calibrated values referred from PVT, in case that the values
+      aren't set on SoC, like a reference board.
+
+required:
+  - compatible
+  - interrupts
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // The UniPhier thermal should be a subnode of a "syscon" compatible node.
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pvtctl: thermal-sensor {
+        compatible = "socionext,uniphier-ld20-thermal";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/spear-thermal.txt b/Documentation/devicetree/bindings/thermal/spear-thermal.txt
new file mode 100644
index 0000000000..93e3b67c10
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/spear-thermal.txt
@@ -0,0 +1,14 @@
+* SPEAr Thermal
+
+Required properties:
+- compatible : "st,thermal-spear1340"
+- reg : Address range of the thermal registers
+- st,thermal-flags: flags used to enable thermal sensor
+
+Example:
+
+	thermal@fc000000 {
+		compatible = "st,thermal-spear1340";
+		reg = <0xfc000000 0x1000>;
+		st,thermal-flags = <0x7000>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
new file mode 100644
index 0000000000..76aaa004c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/sprd-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum thermal sensor controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,ums512-thermal
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: enable
+
+  nvmem-cells:
+    maxItems: 2
+    description:
+      Reference to nvmem nodes for the calibration data.
+
+  nvmem-cell-names:
+    items:
+      - const: thm_sign_cal
+      - const: thm_ratio_cal
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^([a-z]*-)?sensor(-section)?@[0-9]+$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor id.
+        maxItems: 1
+
+      nvmem-cells:
+        maxItems: 1
+        description:
+          Reference to an nvmem node for the calibration data.
+
+      nvmem-cell-names:
+        const: sen_delta_cal
+
+    required:
+      - reg
+      - nvmem-cells
+      - nvmem-cell-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+  - "#thermal-sensor-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+        ap_thm0: thermal@32200000 {
+                compatible = "sprd,ums512-thermal";
+                reg = <0x32200000 0x10000>;
+                clock-names = "enable";
+                clocks = <&aonapb_gate 32>;
+                #thermal-sensor-cells = <1>;
+                nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+                nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                prometheus-sensor@0 {
+                        reg = <0>;
+                        nvmem-cells = <&thm0_sen0>;
+                        nvmem-cell-names = "sen_delta_cal";
+                };
+
+                ank-sensor@1 {
+                        reg = <1>;
+                        nvmem-cells = <&thm0_sen1>;
+                        nvmem-cell-names = "sen_delta_cal";
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
new file mode 100644
index 0000000000..ab043084f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/st,stm32-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 digital thermal sensor (DTS)
+
+maintainers:
+  - Pascal Paillet <p.paillet@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-thermal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - "#thermal-sensor-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dts: thermal@50028000 {
+        compatible = "st,stm32-thermal";
+        reg = <0x50028000 0x100>;
+        clocks = <&rcc TMPSENS>;
+        clock-names = "pclk";
+        #thermal-sensor-cells = <0>;
+        interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+    thermal-zones {
+        cpu_thermal: cpu-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <0>;
+
+            thermal-sensors = <&dts>;
+            trips {
+                cpu_alert1: cpu-alert1 {
+                    temperature = <85000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                cpu_crit: cpu-crit {
+                    temperature = <120000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+
+            cooling-maps {
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
new file mode 100644
index 0000000000..a2f939137e
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -0,0 +1,32 @@
+Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
+
+Required parameters:
+-------------------
+
+compatible : 	Should be "st,stih407-thermal"
+
+clock-names : 	Should be "thermal".
+		  See: Documentation/devicetree/bindings/resource-names.txt
+clocks : 	Phandle of the clock used by the thermal sensor.
+		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional parameters:
+-------------------
+
+reg : 		For non-sysconf based sensors, this should be the physical base
+		address and length of the sensor's registers.
+interrupts :	Standard way to define interrupt number.
+		  NB: For thermal sensor's for which no interrupt has been
+		  defined, a polling delay of 1000ms will be used to read the
+		  temperature from device.
+
+Example:
+
+	temp0@91a0000 {
+		compatible = "st,stih407-thermal";
+		reg = <0x91a0000 0x28>;
+		clock-names = "thermal";
+		clocks = <&CLK_SYSIN>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		st,passive_cooling_temp = <110>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
new file mode 100644
index 0000000000..b9022f1613
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal cooling device
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of cooling devices and thermal zones required to
+  take appropriate action to mitigate thermal overload.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or actively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the cooling devices.
+
+  There are essentially two ways to provide control on power dissipation:
+    - Passive cooling: by means of regulating device performance. A typical
+      passive cooling mechanism is a CPU that has dynamic voltage and frequency
+      scaling (DVFS), and uses lower frequencies as cooling states.
+    - Active cooling: by means of activating devices in order to remove the
+      dissipated heat, e.g. regulating fan speeds.
+
+  Any cooling device has a range of cooling states (i.e. different levels of
+  heat dissipation). They also have a way to determine the state of cooling in
+  which the device is. For example, a fan's cooling states correspond to the
+  different fan speeds possible. Cooling states are referred to by single
+  unsigned integers, where larger numbers mean greater heat dissipation. The
+  precise set of cooling states associated with a device should be defined in
+  a particular device's binding.
+
+select: true
+
+properties:
+  "#cooling-cells":
+    description:
+      Must be 2, in order to specify minimum and maximum cooling state used in
+      the cooling-maps reference. The first cell is the minimum cooling state
+      and the second cell is the maximum cooling state requested.
+    const: 2
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/thermal/thermal.h>
+
+    // Example 1: Cpufreq cooling device on CPU0
+    cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                    device_type = "cpu";
+                    compatible = "qcom,kryo385";
+                    reg = <0x0 0x0>;
+                    enable-method = "psci";
+                    cpu-idle-states = <&LITTLE_CPU_SLEEP_0>,
+                                      <&LITTLE_CPU_SLEEP_1>,
+                                      <&CLUSTER_SLEEP_0>;
+                    capacity-dmips-mhz = <607>;
+                    dynamic-power-coefficient = <100>;
+                    qcom,freq-domain = <&cpufreq_hw 0>;
+                    #cooling-cells = <2>;
+                    next-level-cache = <&L2_0>;
+                    L2_0: l2-cache {
+                            compatible = "cache";
+                            cache-unified;
+                            cache-level = <2>;
+                            next-level-cache = <&L3_0>;
+                            L3_0: l3-cache {
+                                    compatible = "cache";
+                                    cache-unified;
+                                    cache-level = <3>;
+                            };
+                    };
+          };
+
+          /* ... */
+
+    };
+
+    /* ... */
+
+    thermal-zones {
+            cpu0-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 1>;
+
+                    trips {
+                            cpu0_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                            };
+                    };
+
+                    cooling-maps {
+                            map0 {
+                                    trip = <&cpu0_alert0>;
+                                    /* Corresponds to 1000MHz in OPP table */
+                                    cooling-device = <&CPU0 5 5>;
+                            };
+                    };
+            };
+
+            /* ... */
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
new file mode 100644
index 0000000000..1b77d542a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-idle.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal idle cooling device
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+description: |
+  The thermal idle cooling device allows the system to passively
+  mitigate the temperature on the device by injecting idle cycles,
+  forcing it to cool down.
+
+  This binding describes the thermal idle node.
+
+properties:
+  $nodename:
+    const: thermal-idle
+    description: |
+      A thermal-idle node describes the idle cooling device properties to
+      cool down efficiently the attached thermal zone.
+
+  '#cooling-cells':
+    const: 2
+    description: |
+      Must be 2, in order to specify minimum and maximum cooling state used in
+      the cooling-maps reference. The first cell is the minimum cooling state
+      and the second cell is the maximum cooling state requested.
+
+  duration-us:
+    description: |
+      The idle duration in microsecond the device should cool down.
+
+  exit-latency-us:
+    description: |
+      The exit latency constraint in microsecond for the injected idle state
+      for the device. It is the latency constraint to apply when selecting an
+      idle state from among all the present ones.
+
+required:
+  - '#cooling-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /{
+        #include <dt-bindings/thermal/thermal.h>
+
+        compatible = "foo";
+        model = "foo";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // Example: Combining idle cooling device on big CPUs with cpufreq cooling device
+        cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            /* ... */
+
+            cpu_b0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a72";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                capacity-dmips-mhz = <1024>;
+                dynamic-power-coefficient = <436>;
+                #cooling-cells = <2>; /* min followed by max */
+                cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
+                cpu_b0_therm: thermal-idle {
+                    #cooling-cells = <2>;
+                    duration-us = <10000>;
+                    exit-latency-us = <500>;
+                };
+            };
+
+            cpu_b1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a72";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                capacity-dmips-mhz = <1024>;
+                dynamic-power-coefficient = <436>;
+                #cooling-cells = <2>; /* min followed by max */
+                cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
+                cpu_b1_therm: thermal-idle {
+                    #cooling-cells = <2>;
+                    duration-us = <10000>;
+                    exit-latency-us = <500>;
+                };
+            };
+
+            /* ... */
+
+        };
+
+        /* ... */
+
+        thermal_zones {
+            cpu_thermal: cpu {
+                polling-delay-passive = <100>;
+                polling-delay = <1000>;
+
+                /* ... */
+
+                trips {
+                    cpu_alert0: cpu_alert0 {
+                        temperature = <65000>;
+                        hysteresis = <2000>;
+                        type = "passive";
+                    };
+
+                    cpu_alert1: cpu_alert1 {
+                        temperature = <70000>;
+                        hysteresis = <2000>;
+                        type = "passive";
+                    };
+
+                    cpu_alert2: cpu_alert2 {
+                        temperature = <75000>;
+                        hysteresis = <2000>;
+                        type = "passive";
+                    };
+
+                    cpu_crit: cpu_crit {
+                        temperature = <95000>;
+                        hysteresis = <2000>;
+                        type = "critical";
+                    };
+                };
+
+                cooling-maps {
+                    map0 {
+                        trip = <&cpu_alert1>;
+                        cooling-device = <&cpu_b0_therm 0 15 >,
+                                         <&cpu_b1_therm 0 15>;
+                    };
+
+                    map1 {
+                        trip = <&cpu_alert2>;
+                        cooling-device = <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+                                         <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
new file mode 100644
index 0000000000..57565b3fb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal sensor
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of thermal zones required to take appropriate
+  action to mitigate thermal overloads.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or actively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the thermal-sensor.
+
+  Thermal sensor devices provide temperature sensing capabilities on thermal
+  zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor
+  devices may control one or more internal sensors.
+
+properties:
+  "#thermal-sensor-cells":
+    description:
+      Used to uniquely identify a thermal sensor instance within an IC. Will be
+      0 on sensor nodes with only a single sensor and at least 1 on nodes
+      containing several internal sensors.
+    enum: [0, 1]
+
+required:
+  - "#thermal-sensor-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    // Example 1: SDM845 TSENS
+    soc: soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            /* ... */
+
+            tsens0: thermal-sensor@c263000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
+                          <0 0x0c222000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <13>;
+                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+
+            tsens1: thermal-sensor@c265000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
+                          <0 0x0c223000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <8>;
+                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
new file mode 100644
index 0000000000..4f3acdc4de
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -0,0 +1,344 @@
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-zones.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
+
+title: Thermal zone
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of cooling devices and thermal zones required to
+  take appropriate action to mitigate thermal overloads.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or actively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the thermal-zones.
+
+  The polling-delay properties of a thermal-zone are bound to the maximum dT/dt
+  (temperature derivative over time) in two situations for a thermal zone:
+    1. when passive cooling is activated (polling-delay-passive)
+    2. when the zone just needs to be monitored (polling-delay) or when
+       active cooling is activated.
+
+  The maximum dT/dt is highly bound to hardware power consumption and
+  dissipation capability. The delays should be chosen to account for said
+  max dT/dt, such that a device does not cross several trip boundaries
+  unexpectedly between polls. Choosing the right polling delays shall avoid
+  having the device in temperature ranges that may damage the silicon structures
+  and reduce silicon lifetime.
+
+properties:
+  $nodename:
+    const: thermal-zones
+    description:
+      A /thermal-zones node is required in order to use the thermal framework to
+      manage input from the various thermal zones in the system in order to
+      mitigate thermal overload conditions. It does not represent a real device
+      in the system, but acts as a container to link a thermal sensor device,
+      platform-data regarding temperature thresholds and the mitigation actions
+      to take when the temperature crosses those thresholds.
+
+patternProperties:
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+    type: object
+    description:
+      Each thermal zone node contains information about how frequently it
+      must be checked, the sensor responsible for reporting temperature for
+      this zone, one sub-node containing the various trip points for this
+      zone and one sub-node containing all the zone cooling-maps.
+
+    properties:
+      polling-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The maximum number of milliseconds to wait between polls when
+          checking this thermal zone. Setting this to 0 disables the polling
+          timers setup by the thermal framework and assumes that the thermal
+          sensors in this zone support interrupts.
+
+      polling-delay-passive:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The maximum number of milliseconds to wait between polls when
+          checking this thermal zone while doing passive cooling. Setting
+          this to 0 disables the polling timers setup by the thermal
+          framework and assumes that the thermal sensors in this zone
+          support interrupts.
+
+      thermal-sensors:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+        description:
+          The thermal sensor phandle and sensor specifier used to monitor this
+          thermal zone.
+
+      coefficients:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          An array of integers containing the coefficients of a linear equation
+          that binds all the sensors listed in this thermal zone.
+
+          The linear equation used is as follows,
+            z = c0 * x0 + c1 * x1 + ... + c(n-1) * x(n-1) + cn
+          where c0, c1, .., cn are the coefficients.
+
+          Coefficients default to 1 in case this property is not specified. The
+          coefficients are ordered and are matched with sensors by means of the
+          sensor ID. Additional coefficients are interpreted as constant offset.
+
+      sustainable-power:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          An estimate of the sustainable power (in mW) that this thermal zone
+          can dissipate at the desired control temperature. For reference, the
+          sustainable power of a 4-inch phone is typically 2000mW, while on a
+          10-inch tablet is around 4500mW.
+
+      trips:
+        type: object
+        description:
+          This node describes a set of points in the temperature domain at
+          which the thermal framework needs to take action. The actions to
+          be taken are defined in another node called cooling-maps.
+
+        patternProperties:
+          "^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$":
+            type: object
+
+            properties:
+              temperature:
+                $ref: /schemas/types.yaml#/definitions/int32
+                minimum: -273000
+                maximum: 200000
+                description:
+                  An integer expressing the trip temperature in millicelsius.
+
+              hysteresis:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                description:
+                  An unsigned integer expressing the hysteresis delta with
+                  respect to the trip temperature property above, also in
+                  millicelsius. Any cooling action initiated by the framework is
+                  maintained until the temperature falls below
+                  (trip temperature - hysteresis). This potentially prevents a
+                  situation where the trip gets constantly triggered soon after
+                  cooling action is removed.
+
+              type:
+                $ref: /schemas/types.yaml#/definitions/string
+                enum:
+                  - active   # enable active cooling e.g. fans
+                  - passive  # enable passive cooling e.g. throttling cpu
+                  - hot      # send notification to driver
+                  - critical # send notification to driver, trigger shutdown
+                description: |
+                  There are four valid trip types: active, passive, hot,
+                  critical.
+
+                  The critical trip type is used to set the maximum
+                  temperature threshold above which the HW becomes
+                  unstable and underlying firmware might even trigger a
+                  reboot. Hitting the critical threshold triggers a system
+                  shutdown.
+
+                  The hot trip type can be used to send a notification to
+                  the thermal driver (if a .notify callback is registered).
+                  The action to be taken is left to the driver.
+
+                  The passive trip type can be used to slow down HW e.g. run
+                  the CPU, GPU, bus at a lower frequency.
+
+                  The active trip type can be used to control other HW to
+                  help in cooling e.g. fans can be sped up or slowed down
+
+            required:
+              - temperature
+              - hysteresis
+              - type
+            additionalProperties: false
+
+        additionalProperties: false
+
+      cooling-maps:
+        type: object
+        additionalProperties: false
+        description:
+          This node describes the action to be taken when a thermal zone
+          crosses one of the temperature thresholds described in the trips
+          node. The action takes the form of a mapping relation between a
+          trip and the target cooling device state.
+
+        patternProperties:
+          "^map[-a-zA-Z0-9]*$":
+            type: object
+
+            properties:
+              trip:
+                $ref: /schemas/types.yaml#/definitions/phandle
+                description:
+                  A phandle of a trip point node within this thermal zone.
+
+              cooling-device:
+                $ref: /schemas/types.yaml#/definitions/phandle-array
+                description:
+                  A list of cooling device phandles along with the minimum
+                  and maximum cooling state specifiers for each cooling
+                  device. Using the THERMAL_NO_LIMIT (-1UL) constant in the
+                  cooling-device phandle limit specifier lets the framework
+                  use the minimum and maximum cooling state for that cooling
+                  device automatically.
+
+              contribution:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                description:
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
+
+            required:
+              - trip
+              - cooling-device
+            additionalProperties: false
+
+    required:
+      - polling-delay
+      - polling-delay-passive
+      - thermal-sensors
+      - trips
+
+    additionalProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/thermal/thermal.h>
+
+    // Example 1: SDM845 TSENS
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            /* ... */
+
+            tsens0: thermal-sensor@c263000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
+                          <0 0x0c222000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <13>;
+                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+
+            tsens1: thermal-sensor@c265000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
+                          <0 0x0c223000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <8>;
+                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+    };
+
+    /* ... */
+
+    thermal-zones {
+            cpu0-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 1>;
+
+                    trips {
+                            cpu0_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                            };
+
+                            cpu0_alert1: trip-point1 {
+                                    temperature = <95000>;
+                                    hysteresis = <2000>;
+                                    type = "passive";
+                            };
+
+                            cpu0_crit: cpu_crit {
+                                    temperature = <110000>;
+                                    hysteresis = <1000>;
+                                    type = "critical";
+                            };
+                    };
+
+                    cooling-maps {
+                            map0 {
+                                    trip = <&cpu0_alert0>;
+                                    /* Corresponds to 1400MHz in OPP table */
+                                    cooling-device = <&CPU0 3 3>, <&CPU1 3 3>,
+                                                     <&CPU2 3 3>, <&CPU3 3 3>;
+                            };
+
+                            map1 {
+                                    trip = <&cpu0_alert1>;
+                                    /* Corresponds to 1000MHz in OPP table */
+                                    cooling-device = <&CPU0 5 5>, <&CPU1 5 5>,
+                                                     <&CPU2 5 5>, <&CPU3 5 5>;
+                            };
+                    };
+            };
+
+            /* ... */
+
+            cluster0-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 5>;
+
+                    trips {
+                            cluster0_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "hot";
+                            };
+                            cluster0_crit: cluster0_crit {
+                                    temperature = <110000>;
+                                    hysteresis = <2000>;
+                                    type = "critical";
+                            };
+                    };
+            };
+
+            /* ... */
+
+            gpu-top-thermal {
+                    polling-delay-passive = <250>;
+                    polling-delay = <1000>;
+
+                    thermal-sensors = <&tsens0 11>;
+
+                    trips {
+                            gpu1_alert0: trip-point0 {
+                                    temperature = <90000>;
+                                    hysteresis = <2000>;
+                                    type = "hot";
+                            };
+                    };
+            };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
new file mode 100644
index 0000000000..7ed0abe929
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM654 VTM (DTS)
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    const: ti,am654-vtm
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    vtm: thermal@42050000 {
+        compatible = "ti,am654-vtm";
+        reg = <0x42050000 0x25c>;
+        power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu0_thermal: mpu0_thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&vtm0 0>;
+
+        trips {
+                mpu0_crit: mpu0_crit {
+                        temperature = <125000>; /* milliCelsius */
+                        hysteresis = <2000>; /* milliCelsius */
+                        type = "critical";
+                };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
new file mode 100644
index 0000000000..171b3622ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J72XX VTM (DTS)
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+description: |
+  The TI K3 family of SoCs typically have a Voltage & Thermal
+  Management (VTM) device to control up to 8 temperature diode
+  sensors to measure silicon junction temperatures from different
+  hotspots of the chip as well as provide temperature, interrupt
+  and alerting information.
+
+  The following polynomial equation can then be used to convert
+  value returned by this device into a temperature in Celsius
+
+  Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \
+            (-1.7058e-04) * x^2 + (3.2512e-01) * x   + (-4.9003e+01)
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-vtm
+      - ti,j7200-vtm
+
+  reg:
+    items:
+      - description: VTM cfg1 register space
+      - description: VTM cfg2 register space
+      - description: |
+          A software trimming method must be applied to some Jacinto
+          devices to function properly. This eFuse region provides
+          the information needed for these SoCs to report
+          temperatures accurately.
+    minItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-vtm
+    then:
+      properties:
+        reg:
+          minItems: 3
+    else:
+      properties:
+        reg:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    wkup_vtm0: thermal-sensor@42040000 {
+        compatible = "ti,j721e-vtm";
+        reg = <0x42040000 0x350>,
+              <0x42050000 0x350>,
+              <0x43000300 0x10>;
+        power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu_thermal: mpu-thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&wkup_vtm0 0>;
+
+        trips {
+            mpu_crit: mpu-crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
new file mode 100644
index 0000000000..6299dd8de3
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt
@@ -0,0 +1,88 @@
+* Texas Instrument OMAP SCM bandgap bindings
+
+In the System Control Module, OMAP supplies a voltage reference
+and a temperature sensor feature that are gathered in the band
+gap voltage and temperature sensor (VBGAPTS) module. The band
+gap provides current and voltage reference for its internal
+circuits and other analog IP blocks. The analog-to-digital
+converter (ADC) produces an output value that is proportional
+to the silicon temperature.
+
+Required properties:
+- compatible : Should be:
+  - "ti,omap34xx-bandgap" : for OMAP34xx bandgap
+  - "ti,omap36xx-bandgap" : for OMAP36xx bandgap
+  - "ti,omap4430-bandgap" : for OMAP4430 bandgap
+  - "ti,omap4460-bandgap" : for OMAP4460 bandgap
+  - "ti,omap4470-bandgap" : for OMAP4470 bandgap
+  - "ti,omap5430-bandgap" : for OMAP5430 bandgap
+- interrupts : this entry should indicate which interrupt line
+the talert signal is routed to;
+Specific:
+- gpios : this entry should be used to inform which GPIO
+line the tshut signal is routed to. The informed GPIO will
+be treated as an IRQ;
+- regs : this entry must also be specified and it is specific
+to each bandgap version, because the mapping may change from
+soc to soc, apart of depending on available features.
+
+Example:
+OMAP34xx:
+bandgap {
+	reg = <0x48002524 0x4>;
+	compatible = "ti,omap34xx-bandgap";
+};
+
+OMAP36xx:
+bandgap {
+	reg = <0x48002524 0x4>;
+	compatible = "ti,omap36xx-bandgap";
+};
+
+OMAP4430:
+bandgap {
+	reg = <0x4a002260 0x4 0x4a00232C 0x4>;
+	compatible = "ti,omap4430-bandgap";
+};
+
+OMAP4460:
+bandgap {
+	reg = <0x4a002260 0x4
+		0x4a00232C 0x4
+		0x4a002378 0x18>;
+	compatible = "ti,omap4460-bandgap";
+	interrupts = <0 126 4>; /* talert */
+	gpios = <&gpio3 22 0>; /* tshut */
+};
+
+OMAP4470:
+bandgap {
+	reg = <0x4a002260 0x4
+		0x4a00232C 0x4
+		0x4a002378 0x18>;
+	compatible = "ti,omap4470-bandgap";
+	interrupts = <0 126 4>; /* talert */
+	gpios = <&gpio3 22 0>; /* tshut */
+};
+
+OMAP5430:
+bandgap {
+	reg = <0x4a0021e0 0xc
+		0x4a00232c 0xc
+		0x4a002380 0x2c
+		0x4a0023C0 0x3c>;
+	compatible = "ti,omap5430-bandgap";
+	interrupts = <0 126 4>; /* talert */
+};
+
+DRA752:
+bandgap {
+	reg = <0x4a0021e0 0xc
+		0x4a00232c 0xc
+		0x4a002380 0x2c
+		0x4a0023C0 0x3c
+		0x4a002564 0x8
+		0x4a002574 0x50>;
+	compatible = "ti,dra752-bandgap";
+	interrupts = <0 126 4>; /* talert */
+};
diff --git a/Documentation/devicetree/bindings/timer/actions,owl-timer.txt b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt
new file mode 100644
index 0000000000..977054f875
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt
@@ -0,0 +1,21 @@
+Actions Semi Owl Timer
+
+Required properties:
+- compatible      :  "actions,s500-timer" for S500
+                     "actions,s700-timer" for S700
+                     "actions,s900-timer" for S900
+- reg             :  Offset and length of the register set for the device.
+- interrupts      :  Should contain the interrupts.
+- interrupt-names :  Valid names are: "2hz0", "2hz1",
+                                      "timer0", "timer1", "timer2", "timer3"
+                     See ../resource-names.txt
+
+Example:
+
+		timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer0", "timer1";
+		};
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
new file mode 100644
index 0000000000..b3538fac1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/allwinner,sun4i-a10-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Timer
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun4i-a10-timer
+          - allwinner,sun8i-a23-timer
+          - allwinner,sun8i-v3s-timer
+          - allwinner,suniv-f1c100s-timer
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-timer
+              - allwinner,sun50i-a64-timer
+              - allwinner,sun50i-h6-timer
+              - allwinner,sun50i-h616-timer
+          - const: allwinner,sun8i-a23-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 6
+    description:
+      List of timers interrupts
+
+  clocks:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun4i-a10-timer
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-a23-timer
+
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - allwinner,sun8i-v3s-timer
+            - allwinner,suniv-f1c100s-timer
+
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@1c20c00 {
+        compatible = "allwinner,sun4i-a10-timer";
+        reg = <0x01c20c00 0x400>;
+        interrupts = <22>,
+                     <23>,
+                     <24>,
+                     <25>,
+                     <67>,
+                     <68>;
+        clocks = <&osc>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
new file mode 100644
index 0000000000..f1853daec2
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/allwinner,sun5i-a13-hstimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 High-Speed Timer
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun5i-a13-hstimer
+      - const: allwinner,sun7i-a20-hstimer
+      - items:
+          - const: allwinner,sun6i-a31-hstimer
+          - const: allwinner,sun7i-a20-hstimer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: Timer 0 Interrupt
+      - description: Timer 1 Interrupt
+      - description: Timer 2 Interrupt
+      - description: Timer 3 Interrupt
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+if:
+  properties:
+    compatible:
+      const: allwinner,sun5i-a13-hstimer
+
+then:
+  properties:
+    interrupts:
+      minItems: 2
+      maxItems: 2
+
+else:
+  properties:
+    interrupts:
+      minItems: 4
+      maxItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@1c60000 {
+        compatible = "allwinner,sun7i-a20-hstimer";
+        reg = <0x01c60000 0x1000>;
+        interrupts = <0 51 1>,
+                     <0 52 1>,
+                     <0 53 1>,
+                     <0 54 1>;
+        clocks = <&ahb1_gates 19>;
+        resets = <&ahb1rst 19>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt b/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
new file mode 100644
index 0000000000..e698e34887
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/altr,timer-1.0.txt
@@ -0,0 +1,18 @@
+Altera Timer
+
+Required properties:
+
+- compatible : should be "altr,timer-1.0"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : Should contain the timer interrupt number
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "altr,timer-1.0";
+	reg = <0x00400000 0x00000020>;
+	interrupt-parent = <&cpu>;
+	interrupts = <11>;
+	clock-frequency = <125000000>;
+};
diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml
new file mode 100644
index 0000000000..8381a5404e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/amlogic,meson6-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 SoCs Timer Controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    const: amlogic,meson6-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+    description: per-timer event interrupts
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xtal
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    timer@c1109940 {
+        compatible = "amlogic,meson6-timer";
+        reg = <0xc1109940 0x14>;
+        interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xtal>, <&clk81>;
+        clock-names = "xtal", "pclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
new file mode 100644
index 0000000000..c5fc3b6c8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM architected timer
+
+maintainers:
+  - Marc Zyngier <marc.zyngier@arm.com>
+  - Mark Rutland <mark.rutland@arm.com>
+description: |+
+  ARM cores may have a per-core architected timer, which provides per-cpu timers,
+  or a memory mapped architected timer, which provides up to 8 frames with a
+  physical and optional virtual timer per frame.
+
+  The per-core architected timer is attached to a GIC to deliver its
+  per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+  to deliver its interrupts via SPIs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,cortex-a15-timer
+          - const: arm,armv7-timer
+      - items:
+          - enum:
+              - arm,armv7-timer
+              - arm,armv8-timer
+      - items:
+          - const: arm,armv8-timer
+          - const: arm,armv7-timer
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: secure timer irq
+      - description: non-secure timer irq
+      - description: virtual timer irq
+      - description: hypervisor timer irq
+      - description: hypervisor virtual timer irq
+
+  interrupt-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: phys
+          - const: virt
+          - const: hyp-phys
+          - const: hyp-virt
+      - minItems: 3
+        items:
+          - const: sec-phys
+          - const: phys
+          - const: virt
+          - const: hyp-phys
+          - const: hyp-virt
+
+  clock-frequency:
+    description: The frequency of the main counter, in Hz. Should be present
+      only where necessary to work around broken firmware which does not configure
+      CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+      strongly discouraged; fix your firmware unless absolutely impossible.
+
+  always-on:
+    type: boolean
+    description: If present, the timer is powered through an always-on power
+      domain, therefore it never loses context.
+
+  allwinner,erratum-unknown1:
+    type: boolean
+    description: Indicates the presence of an erratum found in Allwinner SoCs,
+      where reading certain values from the counter is unreliable. This also
+      affects writes to the tval register, due to the implicit counter read.
+
+  fsl,erratum-a008585:
+    type: boolean
+    description: Indicates the presence of QorIQ erratum A-008585, which says
+      that reading the counter is unreliable unless the same value is returned
+      by back-to-back reads. This also affects writes to the tval register, due
+      to the implicit counter read.
+
+  hisilicon,erratum-161010101:
+    type: boolean
+    description: Indicates the presence of Hisilicon erratum 161010101, which
+      says that reading the counters is unreliable in some cases, and reads may
+      return a value 32 beyond the correct value. This also affects writes to
+      the tval registers, due to the implicit counter read.
+
+  arm,cpu-registers-not-fw-configured:
+    type: boolean
+    description: Firmware does not initialize any of the generic timer CPU
+      registers, which contain their architecturally-defined reset values. Only
+      supported for 32-bit systems which follow the ARMv7 architected reset
+      values.
+
+  arm,no-tick-in-suspend:
+    type: boolean
+    description: The main counter does not tick when the system is in
+      low-power system suspend on some SoCs. This behavior does not match the
+      Architecture Reference Manual's specification that the system counter "must
+      be implemented in an always-on power domain."
+
+required:
+  - compatible
+
+additionalProperties: false
+
+oneOf:
+  - required:
+      - interrupts
+  - required:
+      - interrupts-extended
+
+examples:
+  - |
+    timer {
+      compatible = "arm,cortex-a15-timer",
+             "arm,armv7-timer";
+      interrupts = <1 13 0xf08>,
+             <1 14 0xf08>,
+             <1 11 0xf08>,
+             <1 10 0xf08>;
+      clock-frequency = <100000000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
new file mode 100644
index 0000000000..7a4a6ab859
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM memory mapped architected timer
+
+maintainers:
+  - Marc Zyngier <marc.zyngier@arm.com>
+  - Mark Rutland <mark.rutland@arm.com>
+
+description: |+
+  ARM cores may have a memory mapped architected timer, which provides up to 8
+  frames with a physical and optional virtual timer per frame.
+
+  The memory mapped timer is attached to a GIC to deliver its interrupts via SPIs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,armv7-timer-mem
+
+  reg:
+    maxItems: 1
+    description: The control frame base address
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clock-frequency:
+    description: The frequency of the main counter, in Hz. Should be present
+      only where necessary to work around broken firmware which does not configure
+      CNTFRQ on all CPUs to a uniform correct value. Use of this property is
+      strongly discouraged; fix your firmware unless absolutely impossible.
+
+  always-on:
+    type: boolean
+    description: If present, the timer is powered through an always-on power
+      domain, therefore it never loses context.
+
+  arm,cpu-registers-not-fw-configured:
+    type: boolean
+    description: Firmware does not initialize any of the generic timer CPU
+      registers, which contain their architecturally-defined reset values. Only
+      supported for 32-bit systems which follow the ARMv7 architected reset
+      values.
+
+  arm,no-tick-in-suspend:
+    type: boolean
+    description: The main counter does not tick when the system is in
+      low-power system suspend on some SoCs. This behavior does not match the
+      Architecture Reference Manual's specification that the system counter "must
+      be implemented in an always-on power domain."
+
+patternProperties:
+  '^frame@[0-9a-z]*$':
+    type: object
+    additionalProperties: false
+    description: A timer node has up to 8 frame sub-nodes, each with the following properties.
+    properties:
+      frame-number:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      interrupts:
+        minItems: 1
+        items:
+          - description: physical timer irq
+          - description: virtual timer irq
+
+      reg:
+        minItems: 1
+        items:
+          - description: 1st view base address
+          - description: 2nd optional view base address
+
+    required:
+      - frame-number
+      - interrupts
+      - reg
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@f0000000 {
+      compatible = "arm,armv7-timer-mem";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0xf0001000 0x1000>;
+      reg = <0xf0000000 0x1000>;
+      clock-frequency = <50000000>;
+
+      frame@0 {
+        frame-number = <0>;
+        interrupts = <0 13 0x8>,
+               <0 14 0x8>;
+        reg = <0x0000 0x1000>,
+              <0x1000 0x1000>;
+      };
+
+      frame@2000 {
+        frame-number = <1>;
+        interrupts = <0 15 0x8>;
+        reg = <0x2000 0x1000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml
new file mode 100644
index 0000000000..2bcade5d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,armv7m-systick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv7M System Timer
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+description: ARMv7-M includes a system timer, known as SysTick.
+
+properties:
+  compatible:
+    const: arm,armv7m-systick
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+oneOf:
+  - required:
+      - clocks
+  - required:
+      - clock-frequency
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@e000e010 {
+        compatible = "arm,armv7m-systick";
+        reg = <0xe000e010 0x10>;
+        clocks = <&clk_systick>;
+    };
+
+  - |
+    timer@e000e010 {
+        compatible = "arm,armv7m-systick";
+        reg = <0xe000e010 0x10>;
+        clock-frequency = <90000000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
new file mode 100644
index 0000000000..4956c8f409
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,global_timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Global Timer
+
+maintainers:
+  - Stuart Menefy <stuart.menefy@st.com>
+
+description:
+  Cortex-A9 are often associated with a per-core Global timer.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,cortex-a5-global-timer
+          - arm,cortex-a9-global-timer
+
+    description: driver supports versions r2p0 and above.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@2c000600 {
+      compatible = "arm,cortex-a9-global-timer";
+      reg = <0x2c000600 0x20>;
+      interrupts = <1 13 0xf01>;
+      clocks = <&arm_periph_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt b/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
new file mode 100644
index 0000000000..48f84d74ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,mps2-timer.txt
@@ -0,0 +1,28 @@
+ARM MPS2 timer
+
+The MPS2 platform has simple general-purpose 32 bits timers.
+
+Required properties:
+- compatible	: Should be "arm,mps2-timer"
+- reg		: Address and length of the register set
+- interrupts	: Reference to the timer interrupt
+
+Required clocking property, have to be one of:
+- clocks	  : The input clock of the timer
+- clock-frequency : The rate in HZ in input of the ARM MPS2 timer
+
+Examples:
+
+timer1: mps2-timer@40000000 {
+	compatible = "arm,mps2-timer";
+	reg = <0x40000000 0x1000>;
+	interrupts = <8>;
+	clocks = <&sysclk>;
+};
+
+timer2: mps2-timer@40001000 {
+	compatible = "arm,mps2-timer";
+	reg = <0x40001000 0x1000>;
+	interrupts = <9>;
+	clock-frequency = <25000000>;
+};
diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
new file mode 100644
index 0000000000..41be7cdab2
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,sp804.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM sp804 Dual Timers
+
+maintainers:
+  - Haojian Zhuang <haojian.zhuang@linaro.org>
+
+description: |+
+  The Arm SP804 IP implements two independent timers, configurable for
+  16 or 32 bit operation and capable of running in one-shot, periodic, or
+  free-running mode. The input clock is shared, but can be gated and prescaled
+  independently for each timer.
+
+  There is a viriant of Arm SP804: Hisilicon 64-bit SP804 timer. Some Hisilicon
+  SoCs, such as Hi1212, should use the dedicated compatible: "hisilicon,sp804".
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,sp804
+          - hisilicon,sp804
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,sp804
+          - hisilicon,sp804
+      - const: arm,primecell
+
+  interrupts:
+    description: |
+      If two interrupts are listed, those are the interrupts for timer
+      1 and 2, respectively. If there is only a single interrupt, it is
+      either a combined interrupt or the sole interrupt of one timer, as
+      specified by the "arm,sp804-has-irq" property.
+    minItems: 1
+    maxItems: 2
+
+  reg:
+    description: The physical base address of the SP804 IP.
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clocks driving the dual timer hardware. This list should
+      be 1 or 3 clocks. With 3 clocks, the order is timer0 clock, timer1
+      clock, apb_pclk. A single clock can also be specified if the same
+      clock is used for all clock inputs.
+    oneOf:
+      - items:
+          - description: clock for timer 1
+          - description: clock for timer 2
+          - description: bus clock
+      - items:
+          - description: unified clock for both timers and the bus
+
+  clock-names: true
+    # The original binding did not specify any clock names, and there is no
+    # consistent naming used in the existing DTs. The primecell binding
+    # requires the "apb_pclk" name, so we need this property.
+    # Use "timer0clk", "timer1clk", "apb_pclk" for new DTs.
+
+  arm,sp804-has-irq:
+    description: If only one interrupt line is connected to the interrupt
+      controller, this property specifies which timer is connected to this
+      line.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 2
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer0: timer@fc800000 {
+        compatible = "arm,sp804", "arm,primecell";
+        reg = <0xfc800000 0x1000>;
+        interrupts = <0 0 4>, <0 1 4>;
+        clocks = <&timclk1>, <&timclk2>, <&pclk>;
+        clock-names = "timer1", "timer2", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml b/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml
new file mode 100644
index 0000000000..5684df6448
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,twd-timer.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,twd-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Timer-Watchdog Timer
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
+  Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
+  and watchdog.
+
+  The TWD is usually attached to a GIC to deliver its two per-processor
+  interrupts.
+
+properties:
+  compatible:
+    enum:
+      - arm,cortex-a9-twd-timer
+      - arm,cortex-a5-twd-timer
+      - arm,arm11mp-twd-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  always-on:
+    description:
+      If present, the timer is powered through an always-on power domain,
+      therefore it never loses context.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@2c000600 {
+            compatible = "arm,arm11mp-twd-timer";
+            reg = <0x2c000600 0x20>;
+            interrupts = <GIC_PPI 13 0xf01>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt
new file mode 100644
index 0000000000..844bd5fbd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt
@@ -0,0 +1,22 @@
+BCM2835 System Timer
+
+The System Timer peripheral provides four 32-bit timer channels and a
+single 64-bit free running counter. Each channel has an output compare
+register, which is compared against the 32 least significant bits of the
+free running counter values, and generates an interrupt.
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-system-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 4 interrupt sinks; one per timer channel.
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "brcm,bcm2835-system-timer";
+	reg = <0x7e003000 0x1000>;
+	interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+	clock-frequency = <1000000>;
+};
diff --git a/Documentation/devicetree/bindings/timer/brcm,bcmbca-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,bcmbca-timer.yaml
new file mode 100644
index 0000000000..6707d97608
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/brcm,bcmbca-timer.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,bcmbca-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC timer
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm6345-timer
+        description: >
+          An old block with 3 timers.
+
+          It can be found in BCM6345, BCM6838 and BCM63268.
+      - const: brcm,bcm63138-timer
+        description: >
+          Updated block with 4 timers and control regs at the beginning.
+
+          It can be found in newer SoCs, e.g. BCM63138, BCM63148, BCM63381,
+          BCM68360, BCM6848, BCM6858, BCM4908.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer@fffe0200 {
+      compatible = "brcm,bcm6345-timer";
+      reg = <0xfffe0200 0x1c>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml
new file mode 100644
index 0000000000..d6af8383d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/brcm,kona-timer.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/brcm,kona-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,kona-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+oneOf:
+  - required:
+      - clocks
+  - required:
+      - clock-frequency
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm281xx.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@35006000 {
+        compatible = "brcm,kona-timer";
+        reg = <0x35006000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
new file mode 100644
index 0000000000..dbba780c9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/cdns,ttc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence TTC - Triple Timer Counter
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    const: cdns,ttc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+    description: |
+      A list of 3 interrupts; one per timer channel.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  timer-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Bit width of the timer, necessary if not 16.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ttc0: ttc0@f8001000 {
+        interrupt-parent = <&intc>;
+        interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+        compatible = "cdns,ttc";
+        reg = <0xF8001000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
new file mode 100644
index 0000000000..d4c62e7b17
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt
@@ -0,0 +1,29 @@
+* Cirrus Logic CLPS711X Timer Counter
+
+Required properties:
+- compatible: Shall contain "cirrus,ep7209-timer".
+- reg       : Address and length of the register set.
+- interrupts: The interrupt number of the timer.
+- clocks    : phandle of timer reference clock.
+
+Note: Each timer should have an alias correctly numbered in "aliases" node.
+
+Example:
+	aliases {
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	timer1: timer@80000300 {
+		compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
+		reg = <0x80000300 0x4>;
+		interrupts = <8>;
+		clocks = <&clks 5>;
+	};
+
+	timer2: timer@80000340 {
+		compatible = "cirrus,ep7312-timer", "cirrus,ep7209-timer";
+		reg = <0x80000340 0x4>;
+		interrupts = <9>;
+		clocks = <&clks 6>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt b/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt
new file mode 100644
index 0000000000..6b04344f4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/csky,gx6605s-timer.txt
@@ -0,0 +1,42 @@
+=================
+gx6605s SOC Timer
+=================
+
+The timer is used in gx6605s soc as system timer and the driver
+contain clk event and clk source.
+
+==============================
+timer node bindings definition
+==============================
+
+	Description: Describes gx6605s SOC timer
+
+	PROPERTIES
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be "csky,gx6605s-timer"
+	- reg
+		Usage: required
+		Value type: <u32 u32>
+		Definition: <phyaddr size> in soc from cpu view
+	- clocks
+		Usage: required
+		Value type: phandle + clock specifier cells
+		Definition: must be input clk node
+	- interrupt
+		Usage: required
+		Value type: <u32>
+		Definition: must be timer irq num defined by soc
+
+Examples:
+---------
+
+	timer0: timer@20a000 {
+		compatible = "csky,gx6605s-timer";
+		reg = <0x0020a000 0x400>;
+		clocks = <&dummy_apb_clk>;
+		interrupts = <10>;
+		interrupt-parent = <&intc>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
new file mode 100644
index 0000000000..f5c7e99cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt
@@ -0,0 +1,42 @@
+============================
+C-SKY Multi-processors Timer
+============================
+
+C-SKY multi-processors timer is designed for C-SKY SMP system and the
+regs is accessed by cpu co-processor 4 registers with mtcr/mfcr.
+
+ - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer.
+ - PTIM_TSR  "cr<1, 14>" Interrupt cleanup status reg.
+ - PTIM_CCVR "cr<3, 14>" Current counter value reg.
+ - PTIM_LVR  "cr<6, 14>" Window value reg to trigger next event.
+
+==============================
+timer node bindings definition
+==============================
+
+	Description: Describes SMP timer
+
+	PROPERTIES
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be "csky,mptimer"
+	- clocks
+		Usage: required
+		Value type: <node>
+		Definition: must be input clk node
+	- interrupts
+		Usage: required
+		Value type: <u32>
+		Definition: must be timer irq num defined by soc
+
+Examples:
+---------
+
+	timer: timer {
+		compatible = "csky,mptimer";
+		clocks = <&dummy_apb_clk>;
+		interrupts = <16>;
+		interrupt-parent = <&intc>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/digicolor-timer.txt b/Documentation/devicetree/bindings/timer/digicolor-timer.txt
new file mode 100644
index 0000000000..d1b659bbc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/digicolor-timer.txt
@@ -0,0 +1,18 @@
+Conexant Digicolor SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-timer"
+- reg : Specifies base physical address and size of the "Agent Communication"
+  timer registers
+- interrupts : Contains 8 interrupts, one for each timer
+- clocks: phandle to the main clock
+
+Example:
+
+	timer@f0000fc0 {
+		compatible = "cnxt,cx92755-timer";
+		reg = <0xf0000fc0 0x40>;
+		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+		clocks = <&main_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
new file mode 100644
index 0000000000..e3cfce8fec
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt
@@ -0,0 +1,17 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible :	should be "ezchip,nps400-timer0"
+
+Clocks required for compatible = "ezchip,nps400-timer0":
+- interrupts : The interrupt of the first timer
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+	compatible = "ezchip,nps400-timer0";
+	interrupts = <3>;
+	clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
new file mode 100644
index 0000000000..c0ab4190b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt
@@ -0,0 +1,15 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible :	should be "ezchip,nps400-timer1"
+
+Clocks required for compatible = "ezchip,nps400-timer1":
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+	compatible = "ezchip,nps400-timer1";
+	clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
new file mode 100644
index 0000000000..3cb2f4c98d
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.txt
@@ -0,0 +1,38 @@
+Faraday Technology timer
+
+This timer is a generic IP block from Faraday Technology, embedded in the
+Cortina Systems Gemini SoCs and other designs.
+
+Required properties:
+
+- compatible : Must be one of
+  "faraday,fttmr010"
+  "cortina,gemini-timer", "faraday,fttmr010"
+  "moxa,moxart-timer", "faraday,fttmr010"
+  "aspeed,ast2400-timer"
+  "aspeed,ast2500-timer"
+  "aspeed,ast2600-timer"
+
+- reg : Should contain registers location and length
+- interrupts : Should contain the three timer interrupts usually with
+  flags for falling edge
+
+Optionally required properties:
+
+- clocks : a clock to provide the tick rate for "faraday,fttmr010"
+- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer
+  and peripheral clock respectively, for "faraday,fttmr010"
+- syscon : a phandle to the global Gemini system controller if the compatible
+  type is "cortina,gemini-timer"
+
+Example:
+
+timer@43000000 {
+	compatible = "faraday,fttmr010";
+	reg = <0x43000000 0x1000>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+		   <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+		   <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+	clocks = <&extclk>, <&pclk>;
+	clock-names = "EXTCLK", "PCLK";
+};
diff --git a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
new file mode 100644
index 0000000000..aa8c40230e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
@@ -0,0 +1,31 @@
+Freescale FlexTimer Module (FTM) Timer
+
+Required properties:
+
+- compatible : should be "fsl,ftm-timer"
+- reg : Specifies base physical address and size of the register sets for the
+  clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain an
+  entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  o "ftm-evt"
+  o "ftm-src"
+  o "ftm-evt-counter-en"
+  o "ftm-src-counter-en"
+- big-endian: One boolean property, the big endian mode will be in use if it is
+  present, or the little endian mode will be in use for all the device registers.
+
+Example:
+ftm: ftm@400b8000 {
+	compatible = "fsl,ftm-timer";
+	reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+	interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "ftm-evt", "ftm-src",
+		"ftm-evt-counter-en", "ftm-src-counter-en";
+	clocks = <&clks VF610_CLK_FTM2>,
+		<&clks VF610_CLK_FTM3>,
+		<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+		<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+	big-endian;
+};
diff --git a/Documentation/devicetree/bindings/timer/fsl,gtm.txt b/Documentation/devicetree/bindings/timer/fsl,gtm.txt
new file mode 100644
index 0000000000..fc1c571f74
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,gtm.txt
@@ -0,0 +1,30 @@
+* Freescale General-purpose Timers Module
+
+Required properties:
+  - compatible : should be
+    "fsl,<chip>-gtm", "fsl,gtm" for SOC GTMs
+    "fsl,<chip>-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs
+    "fsl,<chip>-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs
+  - reg : should contain gtm registers location and length (0x40).
+  - interrupts : should contain four interrupts.
+  - clock-frequency : specifies the frequency driving the timer.
+
+Example:
+
+timer@500 {
+	compatible = "fsl,mpc8360-gtm", "fsl,gtm";
+	reg = <0x500 0x40>;
+	interrupts = <90 8 78 8 84 8 72 8>;
+	interrupt-parent = <&ipic>;
+	/* filled by u-boot */
+	clock-frequency = <0>;
+};
+
+timer@440 {
+	compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm";
+	reg = <0x440 0x40>;
+	interrupts = <12 13 14 15>;
+	interrupt-parent = <&qeic>;
+	/* filled by u-boot */
+	clock-frequency = <0>;
+};
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
new file mode 100644
index 0000000000..dbe1267af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Purpose Timer (GPT)
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-gpt
+      - const: fsl,imx21-gpt
+      - items:
+          - const: fsl,imx27-gpt
+          - const: fsl,imx21-gpt
+      - const: fsl,imx31-gpt
+      - items:
+          - enum:
+              - fsl,imx25-gpt
+              - fsl,imx50-gpt
+              - fsl,imx51-gpt
+              - fsl,imx53-gpt
+              - fsl,imx6q-gpt
+          - const: fsl,imx31-gpt
+      - const: fsl,imx6dl-gpt
+      - items:
+          - enum:
+              - fsl,imx6sl-gpt
+              - fsl,imx6sx-gpt
+              - fsl,imx8mp-gpt
+              - fsl,imxrt1050-gpt
+              - fsl,imxrt1170-gpt
+          - const: fsl,imx6dl-gpt
+      - items:
+          - const: fsl,imx6ul-gpt
+          - const: fsl,imx6sx-gpt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC GPT ipg clock
+      - description: SoC GPT per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    timer@10003000 {
+        compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+        reg = <0x10003000 0x1000>;
+        interrupts = <26>;
+        clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+                 <&clks IMX27_CLK_PER1_GATE>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
new file mode 100644
index 0000000000..d33d90f44d
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/hpe,gxp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Timer
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    const: hpe,gxp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@c0000000 {
+        compatible = "hpe,gxp-timer";
+        reg = <0x80 0x16>;
+        interrupts = <0>;
+        interrupt-parent = <&vic0>;
+        clocks = <&iopclk>;
+        clock-names = "iop";
+    };
diff --git a/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt b/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt
new file mode 100644
index 0000000000..7afce80bf6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt
@@ -0,0 +1,28 @@
+* Pistachio general-purpose timer based clocksource
+
+Required properties:
+ - compatible: "img,pistachio-gptimer".
+ - reg: Address range of the timer registers.
+ - interrupts: An interrupt for each of the four timers
+ - clocks: Should contain a clock specifier for each entry in clock-names
+ - clock-names: Should contain the following entries:
+                "sys", interface clock
+                "slow", slow counter clock
+                "fast", fast counter clock
+ - img,cr-periph: Must contain a phandle to the peripheral control
+		  syscon node.
+
+Example:
+	timer: timer@18102000 {
+		compatible = "img,pistachio-gptimer";
+		reg = <0x18102000 0x100>;
+		interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+		         <&clk_periph PERIPH_CLK_COUNTER_SLOW>,
+			 <&cr_periph SYS_CLK_TIMER>;
+		clock-names = "fast", "slow", "sys";
+		img,cr-periph = <&cr_periph>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
new file mode 100644
index 0000000000..bdc82d8bce
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,sysost.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,sysost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SYSOST in Ingenic XBurst family SoCs
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description:
+  The SYSOST in an Ingenic SoC provides one 64bit timer for clocksource
+  and one or more 32bit timers for clockevent.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - ingenic,x1000-ost
+      - ingenic,x2000-ost
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ost
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
+
+    ost: timer@12000000 {
+        compatible = "ingenic,x1000-ost";
+        reg = <0x12000000 0x3c>;
+
+        #clock-cells = <1>;
+
+        clocks = <&cgu X1000_CLK_OST>;
+        clock-names = "ost";
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
new file mode 100644
index 0000000000..585b5f5217
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Timer/Counter Unit (TCU)
+
+description: |
+  For a description of the TCU hardware and drivers, have a look at
+  Documentation/arch/mips/ingenic-tcu.rst.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-tcu
+          - ingenic,jz4725b-tcu
+          - ingenic,jz4760-tcu
+          - ingenic,jz4760b-tcu
+          - ingenic,jz4770-tcu
+          - ingenic,jz4780-tcu
+          - ingenic,x1000-tcu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^timer@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  ranges: true
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ingenic,jz4740-tcu
+              - ingenic,jz4725b-tcu
+              - ingenic,jz4760-tcu
+              - ingenic,x1000-tcu
+          - const: simple-mfd
+      - items:
+          - enum:
+              - ingenic,jz4780-tcu
+              - ingenic,jz4770-tcu
+              - ingenic,jz4760b-tcu
+          - const: ingenic,jz4760-tcu
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock
+      - description: EXT clock
+      - description: PCLK clock
+      - description: TCU clock
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: ext
+      - const: pclk
+      - const: tcu
+    minItems: 3
+
+  interrupts:
+    items:
+      - description: TCU0 interrupt
+      - description: TCU1 interrupt
+      - description: TCU2 interrupt
+    minItems: 1
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 8
+
+  ingenic,pwm-channels-mask:
+    description: Bitmask of TCU channels reserved for PWM use.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x00
+    maximum: 0xff
+    default: 0xfc
+
+patternProperties:
+  "^watchdog@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - ingenic,jz4740-watchdog
+              - ingenic,jz4780-watchdog
+          - items:
+              - enum:
+                  - ingenic,jz4770-watchdog
+                  - ingenic,jz4760b-watchdog
+                  - ingenic,jz4760-watchdog
+                  - ingenic,jz4725b-watchdog
+              - const: ingenic,jz4740-watchdog
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: wdt
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^pwm@[a-f0-9]+$":
+    type: object
+    $ref: /schemas/pwm/pwm.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - ingenic,jz4740-pwm
+              - ingenic,jz4725b-pwm
+              - ingenic,x1000-pwm
+          - items:
+              - enum:
+                  - ingenic,jz4760-pwm
+                  - ingenic,jz4760b-pwm
+                  - ingenic,jz4770-pwm
+                  - ingenic,jz4780-pwm
+              - const: ingenic,jz4740-pwm
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 6
+        maxItems: 8
+
+      clock-names:
+        items:
+          - const: timer0
+          - const: timer1
+          - const: timer2
+          - const: timer3
+          - const: timer4
+          - const: timer5
+          - const: timer6
+          - const: timer7
+        minItems: 6
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^timer@[a-f0-9]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+              - ingenic,jz4725b-ost
+              - ingenic,jz4760b-ost
+          - items:
+              - const: ingenic,jz4760-ost
+              - const: ingenic,jz4725b-ost
+          - items:
+              - enum:
+                  - ingenic,jz4780-ost
+                  - ingenic,jz4770-ost
+              - const: ingenic,jz4760b-ost
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: ost
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - "#clock-cells"
+  - "#interrupt-cells"
+  - interrupt-controller
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,tcu.h>
+    tcu: timer@10002000 {
+      compatible = "ingenic,jz4770-tcu", "ingenic,jz4760-tcu", "simple-mfd";
+      reg = <0x10002000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10002000 0x1000>;
+
+      #clock-cells = <1>;
+
+      clocks = <&cgu JZ4770_CLK_RTC>,
+               <&cgu JZ4770_CLK_EXT>,
+               <&cgu JZ4770_CLK_PCLK>;
+      clock-names = "rtc", "ext", "pclk";
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <27 26 25>;
+
+      watchdog: watchdog@0 {
+        compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog";
+        reg = <0x0 0xc>;
+
+        clocks = <&tcu TCU_CLK_WDT>;
+        clock-names = "wdt";
+      };
+
+      pwm: pwm@40 {
+        compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+        reg = <0x40 0x80>;
+
+        #pwm-cells = <3>;
+
+        clocks = <&tcu TCU_CLK_TIMER0>,
+                 <&tcu TCU_CLK_TIMER1>,
+                 <&tcu TCU_CLK_TIMER2>,
+                 <&tcu TCU_CLK_TIMER3>,
+                 <&tcu TCU_CLK_TIMER4>,
+                 <&tcu TCU_CLK_TIMER5>,
+                 <&tcu TCU_CLK_TIMER6>,
+                 <&tcu TCU_CLK_TIMER7>;
+        clock-names = "timer0", "timer1", "timer2", "timer3",
+                "timer4", "timer5", "timer6", "timer7";
+      };
+
+      ost: timer@e0 {
+        compatible = "ingenic,jz4770-ost", "ingenic,jz4760b-ost";
+        reg = <0xe0 0x20>;
+
+        clocks = <&tcu TCU_CLK_OST>;
+        clock-names = "ost";
+
+        interrupts = <15>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
new file mode 100644
index 0000000000..526b8db4d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/intel,ixp4xx-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx XScale Networking Processors Timers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the Intel IXP4xx processors.
+
+properties:
+  compatible:
+    items:
+      - const: intel,ixp4xx-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Timer 1 interrupt
+      - description: Timer 2 interrupt
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    timer@c8005000 {
+        compatible = "intel,ixp4xx-timer";
+        reg = <0xc8005000 0x100>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/jcore,pit.txt b/Documentation/devicetree/bindings/timer/jcore,pit.txt
new file mode 100644
index 0000000000..af5dd35469
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/jcore,pit.txt
@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+  there should be one region per cpu, indexed by the sequential,
+  zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+  core is integrated with the aic and allows the timer interrupt
+  assignment to be programmed by software, but this property is
+  required in order to reserve an interrupt number that doesn't
+  conflict with other devices.
+
+
+Example:
+
+timer@200 {
+	compatible = "jcore,pit";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupts = < 0x48 >;
+};
diff --git a/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml
new file mode 100644
index 0000000000..ad61ae5585
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/loongson,ls1x-pwmtimer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/loongson,ls1x-pwmtimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 PWM timer
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 PWM timer can be used for system clock source
+  and clock event timers.
+
+properties:
+  compatible:
+    const: loongson,ls1b-pwmtimer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls1x-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    clocksource: timer@1fe5c030 {
+        compatible = "loongson,ls1b-pwmtimer";
+        reg = <0x1fe5c030 0x10>;
+
+        clocks = <&clkc LS1X_CLKID_APB>;
+        interrupt-parent = <&intc0>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt b/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
new file mode 100644
index 0000000000..b2d07ad90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
@@ -0,0 +1,33 @@
+TI-NSPIRE timer
+
+Required properties:
+
+- compatible : should be "lsi,zevio-timer".
+- reg : The physical base address and size of the timer (always first).
+- clocks: phandle to the source clock.
+
+Optional properties:
+
+- interrupts : The interrupt number of the first timer.
+- reg : The interrupt acknowledgement registers
+	(always after timer base address)
+
+If any of the optional properties are not given, the timer is added as a
+clock-source only.
+
+Example:
+
+timer {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+	interrupts = <19>;
+	clocks = <&timer_clk>;
+};
+
+Example (no clock-events):
+
+timer {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900D0000 0x1000>;
+	clocks = <&timer_clk>;
+};
diff --git a/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
new file mode 100644
index 0000000000..e9c78ce880
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt
@@ -0,0 +1,44 @@
+Marvell Armada 370 and Armada XP Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be one of the following
+              "marvell,armada-370-timer",
+	      "marvell,armada-375-timer",
+	      "marvell,armada-xp-timer".
+- interrupts: Should contain the list of Global Timer interrupts and
+  then local timer interrupts
+- reg: Should contain location and length for timers register. First
+  pair for the Global Timer registers, second pair for the
+  local/private timers.
+
+Clocks required for compatible = "marvell,armada-370-timer":
+- clocks : Must contain a single entry describing the clock input
+
+Clocks required for compatibles = "marvell,armada-xp-timer",
+				  "marvell,armada-375-timer":
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "nbclk" (L2/coherency fabric clock),
+  "fixed" (Reference 25 MHz fixed-clock).
+
+Examples:
+
+- Armada 370:
+
+	timer {
+		compatible = "marvell,armada-370-timer";
+		reg = <0x20300 0x30>, <0x21040 0x30>;
+		interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+		clocks = <&coreclk 2>;
+	};
+
+- Armada XP:
+
+	timer {
+		compatible = "marvell,armada-xp-timer";
+		reg = <0x20300 0x30>, <0x21040 0x30>;
+		interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+		clocks = <&coreclk 2>, <&refclk>;
+		clock-names = "nbclk", "fixed";
+	};
diff --git a/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
new file mode 100644
index 0000000000..cd1a0c256f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/marvell,orion-timer.txt
@@ -0,0 +1,16 @@
+Marvell Orion SoC timer
+
+Required properties:
+- compatible: shall be "marvell,orion-timer"
+- reg: base address of the timer register starting with TIMERS CONTROL register
+- interrupts: should contain the interrupts for Timer0 and Timer1
+- clocks: phandle of timer reference clock (tclk)
+
+Example:
+	timer: timer {
+		compatible = "marvell,orion-timer";
+		reg = <0x20300 0x20>;
+		interrupt-parent = <&bridge_intc>;
+		interrupts = <1>, <2>;
+		clocks = <&core_clk 0>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
new file mode 100644
index 0000000000..b3e797e8aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -0,0 +1,48 @@
+MediaTek Timers
+---------------
+
+MediaTek SoCs have different timers on different platforms,
+- CPUX (ARM/ARM64 System Timer)
+- GPT (General Purpose Timer)
+- SYST (System Timer)
+
+The proper timer will be selected automatically by driver.
+
+Required properties:
+- compatible should contain:
+	For those SoCs that use GPT
+	* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
+	* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
+	* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
+	* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
+	* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
+	* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
+	* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
+	* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
+	* "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
+	* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
+
+	For those SoCs that use SYST
+	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
+	* "mediatek,mt8186-timer" for MT8186 compatible timers (SYST)
+	* "mediatek,mt8188-timer" for MT8188 compatible timers (SYST)
+	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
+	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
+	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
+	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
+
+	For those SoCs that use CPUX
+	* "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
+	* "mediatek,mt8365-systimer" for MT8365 compatible timers (CPUX)
+
+- reg: Should contain location and length for timer register.
+- clocks: Should contain system clock.
+
+Examples:
+
+	timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
new file mode 100644
index 0000000000..1ee4aab695
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mrvl,mmp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP Timer
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+  - Thomas Gleixner <tglx@linutronix.de>
+  - Rob Herring <robh+dt@kernel.org>
+
+properties:
+  $nodename:
+    pattern: '^timer@[a-f0-9]+$'
+
+  compatible:
+    const: mrvl,mmp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@d4014000 {
+        compatible = "mrvl,mmp-timer";
+        reg = <0xd4014000 0x100>;
+        interrupts = <13>;
+        clocks = <&coreclk 2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml b/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml
new file mode 100644
index 0000000000..f118ca423e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mstar,msc313e-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e Timer
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-timer
+      - sstar,ssd20xd-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@6040 {
+        compatible = "mstar,msc313e-timer";
+        reg = <0x6040 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_fiq GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
new file mode 100644
index 0000000000..d53e1bb98b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nuvoton,npcm7xx-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM7xx timer
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,wpcm450-timer  # for Hermon WPCM450
+      - nuvoton,npcm750-timer  # for Poleg NPCM750
+      - nuvoton,npcm845-timer  # for Arbel NPCM845
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: The timer interrupt of timer 0
+
+  clocks:
+    items:
+      - description: The reference clock for timer 0
+      - description: The reference clock for timer 1
+      - description: The reference clock for timer 2
+      - description: The reference clock for timer 3
+      - description: The reference clock for timer 4
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    timer@f0008000 {
+        compatible = "nuvoton,npcm750-timer";
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xf0008000 0x50>;
+        clocks = <&clk NPCM7XX_CLK_TIMER>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
new file mode 100644
index 0000000000..9ea2ea3a75
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nvidia,tegra-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra timer
+
+maintainers:
+  - Stephen Warren <swarren@nvidia.com>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 14 individual interrupts
+          minItems: 1
+          maxItems: 14
+          description: >
+            A list of 14 interrupts; one per each timer channels 0 through 13
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - items:
+                - enum:
+                    - nvidia,tegra114-timer
+                    - nvidia,tegra124-timer
+                    - nvidia,tegra132-timer
+                - const: nvidia,tegra30-timer
+            - items:
+                - const: nvidia,tegra30-timer
+                - const: nvidia,tegra20-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 6 individual interrupts
+          minItems: 1
+          maxItems: 6
+          description: >
+            A list of 6 interrupts; one per each of timer channels 1 through 5,
+            and one for the shared interrupt for the remaining channels.
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra20-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 4 individual interrupts
+          minItems: 1
+          maxItems: 4
+          description: |
+            A list of 4 interrupts; one per timer channel.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-timer
+        description: >
+          The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+          timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+          from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+          (TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+          or watchdog interrupts.
+      - items:
+          - enum:
+              - nvidia,tegra114-timer
+              - nvidia,tegra124-timer
+              - nvidia,tegra132-timer
+          - const: nvidia,tegra30-timer
+      - items:
+          - const: nvidia,tegra30-timer
+          - const: nvidia,tegra20-timer
+        description: >
+          The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
+          running counter, and 5 watchdog modules. The first two channels may also
+          trigger a legacy watchdog reset.
+      - const: nvidia,tegra20-timer
+        description: >
+          The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
+          running counter. The first two channels may also trigger a watchdog reset.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: timer
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    timer@60005000 {
+        compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+        reg = <0x60005000 0x400>;
+        interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 122 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car 214>;
+    };
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@60005000 {
+        compatible = "nvidia,tegra210-timer";
+        reg = <0x60005000 0x400>;
+        interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+        clock-names = "timer";
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
new file mode 100644
index 0000000000..76516e18e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 timer
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  The Tegra timer provides 29-bit timer counters and a 32-bit timestamp
+  counter. Each NV timer selects its timing reference signal from the 1 MHz
+  reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
+  programmed to generate one-shot, periodic, or watchdog interrupts.
+
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-timer
+        description: >
+          The Tegra186 timer provides ten 29-bit timer counters.
+      - const: nvidia,tegra234-timer
+        description: >
+          The Tegra234 timer provides sixteen 29-bit timer counters.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 10
+          description: >
+            One per each timer channels 0 through 9.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 16
+          description: >
+            One per each timer channels 0 through 15.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@3010000 {
+        compatible = "nvidia,tegra186-timer";
+        reg = <0x03010000 0x000e0000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@2080000 {
+        compatible = "nvidia,tegra234-timer";
+        reg = <0x02080000 0x00121000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt
new file mode 100644
index 0000000000..51b05a0e70
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt
@@ -0,0 +1,26 @@
+* NXP LPC3220 timer
+
+The NXP LPC3220 timer is used on a wide range of NXP SoCs. This
+includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts.
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc3220-timer".
+- reg:
+	Address and length of the register set.
+- interrupts:
+	Reference to the timer interrupt
+- clocks:
+	Should contain a reference to timer clock.
+- clock-names:
+	Should contain "timerclk".
+
+Example:
+
+timer1: timer@40085000 {
+	compatible = "nxp,lpc3220-timer";
+	reg = <0x40085000 0x1000>;
+	interrupts = <13>;
+	clocks = <&ccu1 CLK_CPU_TIMER1>;
+	clock-names = "timerclk";
+};
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
new file mode 100644
index 0000000000..2b9653dafa
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,sysctr-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP System Counter Module(sys_ctr)
+
+maintainers:
+  - Bai Ping <ping.bai@nxp.com>
+
+description: |
+  The system counter(sys_ctr) is a programmable system counter
+  which provides a shared time base to Cortex A15, A7, A53, A73,
+  etc. it is intended for use in applications where the counter
+  is always powered and support multiple, unrelated clocks. The
+  compare frame inside can be used for timer purpose.
+
+properties:
+  compatible:
+    const: nxp,sysctr-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: per
+
+  nxp,no-divider:
+    description: if present, means there is no internal base clk divider.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@306a0000 {
+        compatible = "nxp,sysctr-timer";
+        reg = <0x306a0000 0x20000>;
+        clocks = <&clk_8m>;
+        clock-names = "per";
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+     };
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 0000000000..f69773a8e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Timer/PWM Module (TPM) supports input capture, output compare,
+  and the generation of PWM signals to control electric motor and power
+  management applications. The counter, compare and capture registers
+  are clocked by an asynchronous clock that can remain enabled in low
+  power modes. TPM can support global counter bus where one TPM drives
+  the counter bus for the others, provided bit width is the same.
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx7ulp-tpm
+      - items:
+          - const: fsl,imx8ulp-tpm
+          - const: fsl,imx7ulp-tpm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC TPM ipg clock
+      - description: SoC TPM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@40260000 {
+        compatible = "fsl,imx7ulp-tpm";
+        reg = <0x40260000 0x1000>;
+        interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml
new file mode 100644
index 0000000000..daa7832bab
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ralink,rt2880-timer.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,rt2880-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Timer present in Ralink family SoCs
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: ralink,rt2880-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@100 {
+        compatible = "ralink,rt2880-timer";
+        reg = <0x100 0x20>;
+
+        clocks = <&sysc 3>;
+
+        interrupt-parent = <&intc>;
+        interrupts = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
new file mode 100644
index 0000000000..f9043a4488
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL Timer
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    const: rda,8810pl-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hwtimer
+      - const: ostimer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@20910000 {
+      compatible = "rda,8810pl-timer";
+      reg = <0x20910000 0x1000>;
+      interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+                   <17 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hwtimer", "ostimer";
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
new file mode 100644
index 0000000000..a0be1755ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,cmt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Compare Match Timer (CMT)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+  inputs and programmable compare match.
+
+  Channels share hardware resources but their counter and compare match values
+  are independent. A particular CMT instance can implement only a subset of the
+  channels supported by the CMT model. Channel indices represent the hardware
+  position of the channel in the CMT and don't match the channel numbers in the
+  datasheets.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a7740-cmt0      # 32-bit CMT0 on R-Mobile A1
+              - renesas,r8a7740-cmt1      # 48-bit CMT1 on R-Mobile A1
+              - renesas,r8a7740-cmt2      # 32-bit CMT2 on R-Mobile A1
+              - renesas,r8a7740-cmt3      # 32-bit CMT3 on R-Mobile A1
+              - renesas,r8a7740-cmt4      # 32-bit CMT4 on R-Mobile A1
+              - renesas,sh73a0-cmt0       # 32-bit CMT0 on SH-Mobile AG5
+              - renesas,sh73a0-cmt1       # 48-bit CMT1 on SH-Mobile AG5
+              - renesas,sh73a0-cmt2       # 32-bit CMT2 on SH-Mobile AG5
+              - renesas,sh73a0-cmt3       # 32-bit CMT3 on SH-Mobile AG5
+              - renesas,sh73a0-cmt4       # 32-bit CMT4 on SH-Mobile AG5
+
+      - items:
+          - enum:
+              - renesas,r8a73a4-cmt0      # 32-bit CMT0 on R-Mobile APE6
+              - renesas,r8a7742-cmt0      # 32-bit CMT0 on RZ/G1H
+              - renesas,r8a7743-cmt0      # 32-bit CMT0 on RZ/G1M
+              - renesas,r8a7744-cmt0      # 32-bit CMT0 on RZ/G1N
+              - renesas,r8a7745-cmt0      # 32-bit CMT0 on RZ/G1E
+              - renesas,r8a77470-cmt0     # 32-bit CMT0 on RZ/G1C
+              - renesas,r8a7790-cmt0      # 32-bit CMT0 on R-Car H2
+              - renesas,r8a7791-cmt0      # 32-bit CMT0 on R-Car M2-W
+              - renesas,r8a7792-cmt0      # 32-bit CMT0 on R-Car V2H
+              - renesas,r8a7793-cmt0      # 32-bit CMT0 on R-Car M2-N
+              - renesas,r8a7794-cmt0      # 32-bit CMT0 on R-Car E2
+          - const: renesas,rcar-gen2-cmt0 # 32-bit CMT0 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a73a4-cmt1      # 48-bit CMT1 on R-Mobile APE6
+              - renesas,r8a7742-cmt1      # 48-bit CMT1 on RZ/G1H
+              - renesas,r8a7743-cmt1      # 48-bit CMT1 on RZ/G1M
+              - renesas,r8a7744-cmt1      # 48-bit CMT1 on RZ/G1N
+              - renesas,r8a7745-cmt1      # 48-bit CMT1 on RZ/G1E
+              - renesas,r8a77470-cmt1     # 48-bit CMT1 on RZ/G1C
+              - renesas,r8a7790-cmt1      # 48-bit CMT1 on R-Car H2
+              - renesas,r8a7791-cmt1      # 48-bit CMT1 on R-Car M2-W
+              - renesas,r8a7792-cmt1      # 48-bit CMT1 on R-Car V2H
+              - renesas,r8a7793-cmt1      # 48-bit CMT1 on R-Car M2-N
+              - renesas,r8a7794-cmt1      # 48-bit CMT1 on R-Car E2
+          - const: renesas,rcar-gen2-cmt1 # 48-bit CMT1 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-cmt0     # 32-bit CMT0 on RZ/G2M
+              - renesas,r8a774b1-cmt0     # 32-bit CMT0 on RZ/G2N
+              - renesas,r8a774c0-cmt0     # 32-bit CMT0 on RZ/G2E
+              - renesas,r8a774e1-cmt0     # 32-bit CMT0 on RZ/G2H
+              - renesas,r8a7795-cmt0      # 32-bit CMT0 on R-Car H3
+              - renesas,r8a7796-cmt0      # 32-bit CMT0 on R-Car M3-W
+              - renesas,r8a77961-cmt0     # 32-bit CMT0 on R-Car M3-W+
+              - renesas,r8a77965-cmt0     # 32-bit CMT0 on R-Car M3-N
+              - renesas,r8a77970-cmt0     # 32-bit CMT0 on R-Car V3M
+              - renesas,r8a77980-cmt0     # 32-bit CMT0 on R-Car V3H
+              - renesas,r8a77990-cmt0     # 32-bit CMT0 on R-Car E3
+              - renesas,r8a77995-cmt0     # 32-bit CMT0 on R-Car D3
+          - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-cmt1     # 48-bit CMT on RZ/G2M
+              - renesas,r8a774b1-cmt1     # 48-bit CMT on RZ/G2N
+              - renesas,r8a774c0-cmt1     # 48-bit CMT on RZ/G2E
+              - renesas,r8a774e1-cmt1     # 48-bit CMT on RZ/G2H
+              - renesas,r8a7795-cmt1      # 48-bit CMT on R-Car H3
+              - renesas,r8a7796-cmt1      # 48-bit CMT on R-Car M3-W
+              - renesas,r8a77961-cmt1     # 48-bit CMT on R-Car M3-W+
+              - renesas,r8a77965-cmt1     # 48-bit CMT on R-Car M3-N
+              - renesas,r8a77970-cmt1     # 48-bit CMT on R-Car V3M
+              - renesas,r8a77980-cmt1     # 48-bit CMT on R-Car V3H
+              - renesas,r8a77990-cmt1     # 48-bit CMT on R-Car E3
+              - renesas,r8a77995-cmt1     # 48-bit CMT on R-Car D3
+          - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-cmt0     # 32-bit CMT0 on R-Car V3U
+              - renesas,r8a779f0-cmt0     # 32-bit CMT0 on R-Car S4-8
+              - renesas,r8a779g0-cmt0     # 32-bit CMT0 on R-Car V4H
+          - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-cmt1     # 48-bit CMT on R-Car V3U
+              - renesas,r8a779f0-cmt1     # 48-bit CMT on R-Car S4-8
+              - renesas,r8a779g0-cmt1     # 48-bit CMT on R-Car V4H
+          - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-cmt0
+              - renesas,rcar-gen3-cmt0
+              - renesas,rcar-gen4-cmt0
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-cmt1
+              - renesas,rcar-gen3-cmt1
+              - renesas,rcar-gen4-cmt1
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    cmt0: timer@ffca0000 {
+            compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
+            reg = <0xffca0000 0x1004>;
+            interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 124>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 124>;
+    };
+
+    cmt1: timer@e6130000 {
+            compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
+            reg = <0xe6130000 0x1004>;
+            interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 329>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 329>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,em-sti.yaml b/Documentation/devicetree/bindings/timer/renesas,em-sti.yaml
new file mode 100644
index 0000000000..233d74d540
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,em-sti.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,em-sti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas EMMA Mobile System Timer
+
+maintainers:
+  - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+  compatible:
+    const: renesas,em-sti
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    timer@e0180000 {
+            compatible = "renesas,em-sti";
+            reg = <0xe0180000 0x54>;
+            interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&sti_sclk>;
+            clock-names = "sclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
new file mode 100644
index 0000000000..15d8dddf4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,mtu2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs
+  and programmable compare match.
+
+  Channels share hardware resources but their counter and compare match value are
+  independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,mtu2-r7s72100 # RZ/A1H
+      - const: renesas,mtu2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+    description: One entry for each enabled channel.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tgi0a
+      - const: tgi1a
+      - const: tgi2a
+      - const: tgi3a
+      - const: tgi4a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mtu2: timer@fcff0000 {
+            compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+            reg = <0xfcff0000 0x400>;
+            interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tgi0a";
+            clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+            clock-names = "fck";
+            power-domains = <&cpg_clocks>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
new file mode 100644
index 0000000000..7207929e5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,ostm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas OS Timer (OSTM)
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The OSTM is a multi-channel 32-bit timer/counter with fixed clock source that
+  can operate in either interval count down timer or free-running compare match
+  mode.
+
+  Channels are independent from each other.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-ostm  # RZ/A1H
+          - renesas,r7s9210-ostm   # RZ/A2M
+          - renesas,r9a07g043-ostm # RZ/G2UL
+          - renesas,r9a07g044-ostm # RZ/G2{L,LC}
+          - renesas,r9a07g054-ostm # RZ/V2L
+      - const: renesas,ostm        # Generic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g043-ostm
+          - renesas,r9a07g044-ostm
+          - renesas,r9a07g054-ostm
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ostm0: timer@fcfec000 {
+            compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+            reg = <0xfcfec000 0x30>;
+            interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+            power-domains = <&cpg_clocks>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
new file mode 100644
index 0000000000..fbac40b958
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,rz-mtu3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This hardware block consists of eight 16-bit timer channels and one
+  32- bit timer channel. It supports the following specifications:
+    - Pulse input/output: 28 lines max.
+    - Pulse input 3 lines
+    - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks
+      for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination
+      (when LWA = 1))
+    - Operating frequency Up to 100 MHz
+    - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8]
+        - Waveform output on compare match
+        - Input capture function (noise filter setting available)
+        - Counter-clearing operation
+        - Simultaneous writing to multiple timer counters (TCNT)
+          (excluding MTU8).
+        - Simultaneous clearing on compare match or input capture
+          (excluding MTU8).
+        - Simultaneous input and output to registers in synchronization with
+          counter operations           (excluding MTU8).
+        - Up to 12-phase PWM output in combination with synchronous operation
+          (excluding MTU8)
+    - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8]
+        - Buffer operation specifiable
+    - [MTU1, MTU2]
+        - Phase counting mode can be specified independently
+        - 32-bit phase counting mode can be specified for interlocked operation
+          of MTU1 and MTU2 (when TMDR3.LWA = 1)
+        - Cascade connection operation available
+    - [MTU3, MTU4, MTU6, and MTU7]
+        - Through interlocked operation of MTU3/4 and MTU6/7, the positive and
+          negative signals in six phases (12 phases in total) can be output in
+          complementary PWM and reset-synchronized PWM operation.
+        - In complementary PWM mode, values can be transferred from buffer
+          registers to temporary registers at crests and troughs of the timer-
+          counter values or when the buffer registers (TGRD registers in MTU4
+          and MTU7) are written to.
+        - Double-buffering selectable in complementary PWM mode.
+    - [MTU3 and MTU4]
+        - Through interlocking with MTU0, a mode for driving AC synchronous
+          motors (brushless DC motors) by using complementary PWM output and
+          reset-synchronized PWM output is settable and allows the selection
+          of two types of waveform output (chopping or level).
+    - [MTU5]
+        - Capable of operation as a dead-time compensation counter.
+    - [MTU0/MTU5, MTU1, MTU2, and MTU8]
+        - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and
+          through interlocked operation with MTU0/MTU5 and MTU8.
+    - Interrupt-skipping function
+        - In complementary PWM mode, interrupts on crests and troughs of counter
+          values and triggers to start conversion by the A/D converter can be
+          skipped.
+    - Interrupt sources: 43 sources.
+    - Buffer operation:
+        - Automatic transfer of register data (transfer from the buffer
+          register to the timer register).
+    - Trigger generation
+        - A/D converter start triggers can be generated
+        - A/D converter start request delaying function enables A/D converter
+          to be started with any desired timing and to be synchronized with
+          PWM output.
+    - Low power consumption function
+        - The MTU3a can be placed in the module-stop state.
+
+    There are two phase counting modes. 16-bit phase counting mode in which
+    MTU1 and MTU2 operate independently, and cascade connection 32-bit phase
+    counting mode in which MTU1 and MTU2 are cascaded.
+
+    In phase counting mode, the phase difference between two external input
+    clocks is detected and the corresponding TCNT is incremented or
+    decremented.
+    The below counters are supported
+      count0 - MTU1 16-bit phase counting
+      count1 - MTU2 16-bit phase counting
+      count2 - MTU1+ MTU2 32-bit phase counting
+
+    The module supports PWM mode{1,2}, Reset-synchronized PWM mode and
+    complementary PWM mode{1,2,3}.
+
+    In complementary PWM mode, six positive-phase and six negative-phase PWM
+    waveforms (12 phases in total) with dead time can be output by
+    combining MTU{3,4} and MTU{6,7}.
+
+    The below pwm channels are supported in pwm mode 1.
+      pwm0  - MTU0.MTIOC0A PWM mode 1
+      pwm1  - MTU0.MTIOC0C PWM mode 1
+      pwm2  - MTU1.MTIOC1A PWM mode 1
+      pwm3  - MTU2.MTIOC2A PWM mode 1
+      pwm4  - MTU3.MTIOC3A PWM mode 1
+      pwm5  - MTU3.MTIOC3C PWM mode 1
+      pwm6  - MTU4.MTIOC4A PWM mode 1
+      pwm7  - MTU4.MTIOC4C PWM mode 1
+      pwm8  - MTU6.MTIOC6A PWM mode 1
+      pwm9  - MTU6.MTIOC6C PWM mode 1
+      pwm10 - MTU7.MTIOC7A PWM mode 1
+      pwm11 - MTU7.MTIOC7C PWM mode 1
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-mtu3  # RZ/G2{L,LC}
+          - renesas,r9a07g054-mtu3  # RZ/V2L
+      - const: renesas,rz-mtu3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: MTU0.TGRA input capture/compare match
+      - description: MTU0.TGRB input capture/compare match
+      - description: MTU0.TGRC input capture/compare match
+      - description: MTU0.TGRD input capture/compare match
+      - description: MTU0.TCNT overflow
+      - description: MTU0.TGRE compare match
+      - description: MTU0.TGRF compare match
+      - description: MTU1.TGRA input capture/compare match
+      - description: MTU1.TGRB input capture/compare match
+      - description: MTU1.TCNT overflow
+      - description: MTU1.TCNT underflow
+      - description: MTU2.TGRA input capture/compare match
+      - description: MTU2.TGRB input capture/compare match
+      - description: MTU2.TCNT overflow
+      - description: MTU2.TCNT underflow
+      - description: MTU3.TGRA input capture/compare match
+      - description: MTU3.TGRB input capture/compare match
+      - description: MTU3.TGRC input capture/compare match
+      - description: MTU3.TGRD input capture/compare match
+      - description: MTU3.TCNT overflow
+      - description: MTU4.TGRA input capture/compare match
+      - description: MTU4.TGRB input capture/compare match
+      - description: MTU4.TGRC input capture/compare match
+      - description: MTU4.TGRD input capture/compare match
+      - description: MTU4.TCNT overflow/underflow
+      - description: MTU5.TGRU input capture/compare match
+      - description: MTU5.TGRV input capture/compare match
+      - description: MTU5.TGRW input capture/compare match
+      - description: MTU6.TGRA input capture/compare match
+      - description: MTU6.TGRB input capture/compare match
+      - description: MTU6.TGRC input capture/compare match
+      - description: MTU6.TGRD input capture/compare match
+      - description: MTU6.TCNT overflow
+      - description: MTU7.TGRA input capture/compare match
+      - description: MTU7.TGRB input capture/compare match
+      - description: MTU7.TGRC input capture/compare match
+      - description: MTU7.TGRD input capture/compare match
+      - description: MTU7.TCNT overflow/underflow
+      - description: MTU8.TGRA input capture/compare match
+      - description: MTU8.TGRB input capture/compare match
+      - description: MTU8.TGRC input capture/compare match
+      - description: MTU8.TGRD input capture/compare match
+      - description: MTU8.TCNT overflow
+      - description: MTU8.TCNT underflow
+
+  interrupt-names:
+    items:
+      - const: tgia0
+      - const: tgib0
+      - const: tgic0
+      - const: tgid0
+      - const: tciv0
+      - const: tgie0
+      - const: tgif0
+      - const: tgia1
+      - const: tgib1
+      - const: tciv1
+      - const: tciu1
+      - const: tgia2
+      - const: tgib2
+      - const: tciv2
+      - const: tciu2
+      - const: tgia3
+      - const: tgib3
+      - const: tgic3
+      - const: tgid3
+      - const: tciv3
+      - const: tgia4
+      - const: tgib4
+      - const: tgic4
+      - const: tgid4
+      - const: tciv4
+      - const: tgiu5
+      - const: tgiv5
+      - const: tgiw5
+      - const: tgia6
+      - const: tgib6
+      - const: tgic6
+      - const: tgid6
+      - const: tciv6
+      - const: tgia7
+      - const: tgib7
+      - const: tgic7
+      - const: tgid7
+      - const: tciv7
+      - const: tgia8
+      - const: tgib8
+      - const: tgic8
+      - const: tgid8
+      - const: tciv8
+      - const: tciu8
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mtu3: timer@10001200 {
+      compatible = "renesas,r9a07g044-mtu3", "renesas,rz-mtu3";
+      reg = <0x10001200 0xb00>;
+      interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+      interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0",
+                        "tgif0",
+                        "tgia1", "tgib1", "tciv1", "tciu1",
+                        "tgia2", "tgib2", "tciv2", "tciu2",
+                        "tgia3", "tgib3", "tgic3", "tgid3", "tciv3",
+                        "tgia4", "tgib4", "tgic4", "tgid4", "tciv4",
+                        "tgiu5", "tgiv5", "tgiw5",
+                        "tgia6", "tgib6", "tgic6", "tgid6", "tciv6",
+                        "tgia7", "tgib7", "tgic7", "tgid7", "tciv7",
+                        "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8";
+      clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
+      power-domains = <&cpg>;
+      resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
new file mode 100644
index 0000000000..a67e427a9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,tmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile/R-Car Timer Unit (TMU)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The TMU is a 32-bit timer/counter with configurable clock inputs and
+  programmable compare match.
+
+  Channels share hardware resources but their counter and compare match value
+  are independent. The TMU hardware supports up to three channels.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,tmu-r8a7740  # R-Mobile A1
+          - renesas,tmu-r8a774a1 # RZ/G2M
+          - renesas,tmu-r8a774b1 # RZ/G2N
+          - renesas,tmu-r8a774c0 # RZ/G2E
+          - renesas,tmu-r8a774e1 # RZ/G2H
+          - renesas,tmu-r8a7778  # R-Car M1A
+          - renesas,tmu-r8a7779  # R-Car H1
+          - renesas,tmu-r8a7795  # R-Car H3
+          - renesas,tmu-r8a7796  # R-Car M3-W
+          - renesas,tmu-r8a77961 # R-Car M3-W+
+          - renesas,tmu-r8a77965 # R-Car M3-N
+          - renesas,tmu-r8a77970 # R-Car V3M
+          - renesas,tmu-r8a77980 # R-Car V3H
+          - renesas,tmu-r8a77990 # R-Car E3
+          - renesas,tmu-r8a77995 # R-Car D3
+          - renesas,tmu-r8a779a0 # R-Car V3U
+          - renesas,tmu-r8a779f0 # R-Car S4-8
+          - renesas,tmu-r8a779g0 # R-Car V4H
+      - const: renesas,tmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#renesas,channels':
+    description:
+      Number of channels implemented by the timer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 2, 3 ]
+    default: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - renesas,tmu-r8a7740
+            - renesas,tmu-r8a7778
+            - renesas,tmu-r8a7779
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7779-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7779-sysc.h>
+    tmu0: timer@ffd80000 {
+            compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+            reg = <0xffd80000 0x30>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+            #renesas,channels = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.yaml b/Documentation/devicetree/bindings/timer/renesas,tpu.yaml
new file mode 100644
index 0000000000..01554dff23
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,tpu.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,tpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas H8/300 Timer Pulse Unit
+
+maintainers:
+  - Yoshinori Sato <ysato@users.sourceforge.jp>
+
+description:
+  The TPU is a 16bit timer/counter with configurable clock inputs and
+  programmable compare match.
+  This implementation supports only cascade mode.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: renesas,tpu
+    '#pwm-cells': false
+  required:
+    - compatible
+
+properties:
+  compatible:
+    const: renesas,tpu
+
+  reg:
+    items:
+      - description: First channel
+      - description: Second channel
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    tpu: tpu@ffffe0 {
+            compatible = "renesas,tpu";
+            reg = <0xffffe0 16>, <0xfffff0 12>;
+            clocks = <&pclk>;
+            clock-names = "fck";
+    };
diff --git a/Documentation/devicetree/bindings/timer/riscv,timer.yaml b/Documentation/devicetree/bindings/timer/riscv,timer.yaml
new file mode 100644
index 0000000000..38d67e1a5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/riscv,timer.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/riscv,timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V timer
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |+
+  RISC-V platforms always have a RISC-V timer device for the supervisor-mode
+  based on the time CSR defined by the RISC-V privileged specification. The
+  timer interrupts of this device are configured using the RISC-V SBI Time
+  extension or the RISC-V Sstc extension.
+
+  The clock frequency of RISC-V timer device is specified via the
+  "timebase-frequency" DT property of "/cpus" DT node which is described
+  in Documentation/devicetree/bindings/riscv/cpus.yaml
+
+properties:
+  compatible:
+    enum:
+      - riscv,timer
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4096   # Should be enough?
+
+  riscv,timer-cannot-wake-cpu:
+    type: boolean
+    description:
+      If present, the timer interrupt cannot wake up the CPU from one or
+      more suspend/idle states.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts-extended
+
+examples:
+  - |
+    timer {
+      compatible = "riscv,timer";
+      interrupts-extended = <&cpu1intc 5>,
+                            <&cpu2intc 5>,
+                            <&cpu3intc 5>,
+                            <&cpu4intc 5>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
new file mode 100644
index 0000000000..19e56b7577
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rockchip,rk-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Timer
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3288-timer
+      - const: rockchip,rk3399-timer
+      - items:
+          - enum:
+              - rockchip,rv1108-timer
+              - rockchip,rv1126-timer
+              - rockchip,rk3036-timer
+              - rockchip,rk3128-timer
+              - rockchip,rk3188-timer
+              - rockchip,rk3228-timer
+              - rockchip,rk3229-timer
+              - rockchip,rk3368-timer
+              - rockchip,rk3588-timer
+              - rockchip,px30-timer
+          - const: rockchip,rk3288-timer
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: timer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    timer: timer@ff810000 {
+        compatible = "rockchip,rk3288-timer";
+        reg = <0xff810000 0x20>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru PCLK_TIMER>, <&xin24m>;
+        clock-names = "pclk", "timer";
+    };
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
new file mode 100644
index 0000000000..829bd2227f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Multi Core Timer (MCT)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+  global timer and CPU local timers. The global timer is a 64-bit free running
+  up-counter and can generate 4 interrupts when the counter reaches one of the
+  four preset counter values. The CPU local timers are 32-bit free running
+  down-counters and generate an interrupt when the counter expires. There is
+  one CPU local timer instantiated in MCT for every CPU in the system.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mct
+          - samsung,exynos4412-mct
+      - items:
+          - enum:
+              - axis,artpec8-mct
+              - samsung,exynos3250-mct
+              - samsung,exynos5250-mct
+              - samsung,exynos5260-mct
+              - samsung,exynos5420-mct
+              - samsung,exynos5433-mct
+              - samsung,exynos850-mct
+              - tesla,fsd-mct
+          - const: samsung,exynos4210-mct
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fin_pll
+      - const: mct
+
+  reg:
+    maxItems: 1
+
+  samsung,frc-shared:
+    type: boolean
+    description: |
+      Indicates that the hardware requires that this processor share the
+      free-running counter with a different (main) processor.
+
+  samsung,local-timers:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    description: |
+      List of indices of local timers usable from this processor.
+
+  interrupts:
+    description: |
+      Interrupts should be put in specific order. This is, the local timer
+      interrupts should be specified after the four global timer interrupts
+      have been specified:
+      0: Global Timer Interrupt 0
+      1: Global Timer Interrupt 1
+      2: Global Timer Interrupt 2
+      3: Global Timer Interrupt 3
+      4: Local Timer Interrupt 0
+      5: Local Timer Interrupt 1
+      6: ..
+      7: ..
+      i: Local Timer Interrupt n
+      For MCT block that uses a per-processor interrupt for local timers, such
+      as ones compatible with "samsung,exynos4412-mct", only one local timer
+      interrupt might be specified, meaning that all local timers use the same
+      per processor interrupt.
+    minItems: 5               # 4 Global + 1 local
+    maxItems: 20              # 4 Global + 16 local
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - axis,artpec8-mct
+    then:
+      properties:
+        samsung,local-timers: false
+        samsung,frc-shared: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - axis,artpec8-mct
+              - samsung,exynos5260-mct
+              - samsung,exynos5420-mct
+              - samsung,exynos5433-mct
+              - samsung,exynos850-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 12
+          maxItems: 12
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - tesla,fsd-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 16
+          maxItems: 16
+
+additionalProperties: false
+
+examples:
+  - |
+    // In this example, the IP contains two local timers, using separate
+    // interrupts, so two local timer interrupts have been specified,
+    // in addition to four global timer interrupts.
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@10050000 {
+        compatible = "samsung,exynos4210-mct";
+        reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    // In this example, the timer interrupts are connected to two separate
+    // interrupt controllers. Hence, an interrupts-extended is needed.
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@101c0000 {
+        compatible = "samsung,exynos4210-mct";
+        reg = <0x101C0000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
+        interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                              <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                              <&combiner 12 6>,
+                              <&combiner 12 7>,
+                              <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                              <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    // In this example, the IP contains four local timers, but using
+    // a per-processor interrupt to handle them. Only one first local
+    // interrupt is specified.
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@10050000 {
+        compatible = "samsung,exynos4412-mct";
+        reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    // In this example, the IP contains four local timers, but using
+    // a per-processor interrupt to handle them. All the local timer
+    // interrupts are specified.
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@10050000 {
+        compatible = "samsung,exynos4412-mct";
+        reg = <0x10050000 0x800>;
+        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+        clock-names = "fin_pll", "mct";
+
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
new file mode 100644
index 0000000000..a0185e15a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/sifive,clint.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Core Local Interruptor
+
+maintainers:
+  - Palmer Dabbelt <palmer@dabbelt.com>
+  - Anup Patel <anup.patel@wdc.com>
+
+description:
+  SiFive (and other RISC-V) SOCs include an implementation of the SiFive
+  Core Local Interruptor (CLINT) for M-mode timer and M-mode inter-processor
+  interrupts. It directly connects to the timer and inter-processor interrupt
+  lines of various HARTs (or CPUs) so RISC-V per-HART (or per-CPU) local
+  interrupt controller is the parent interrupt controller for CLINT device.
+  The clock frequency of CLINT is specified via "timebase-frequency" DT
+  property of "/cpus" DT node. The "timebase-frequency" DT property is
+  described in Documentation/devicetree/bindings/riscv/cpus.yaml
+
+  T-Head C906/C910 CPU cores include an implementation of CLINT too, however
+  their implementation lacks a memory-mapped MTIME register, thus not
+  compatible with SiFive ones.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - canaan,k210-clint       # Canaan Kendryte K210
+              - sifive,fu540-c000-clint # SiFive FU540
+              - starfive,jh7100-clint   # StarFive JH7100
+              - starfive,jh7110-clint   # StarFive JH7110
+          - const: sifive,clint0        # SiFive CLINT v0 IP block
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-clint
+              - thead,th1520-clint
+          - const: thead,c900-clint
+      - items:
+          - const: sifive,clint0
+          - const: riscv,clint0
+        deprecated: true
+        description: For the QEMU virt machine only
+
+    description:
+      Should be "<vendor>,<chip>-clint", followed by "sifive,clint<version>"
+      when compatible with a SiFive CLINT.  Please refer to
+      sifive-blocks-ip-versioning.txt for details regarding the latter.
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    timer@2000000 {
+      compatible = "sifive,fu540-c000-clint", "sifive,clint0";
+      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
+                            <&cpu2intc 3>, <&cpu2intc 7>,
+                            <&cpu3intc 3>, <&cpu3intc 7>,
+                            <&cpu4intc 3>, <&cpu4intc 7>;
+       reg = <0x2000000 0x10000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/snps,arc-timer.txt b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
new file mode 100644
index 0000000000..b02ab0af10
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/snps,arc-timer.txt
@@ -0,0 +1,27 @@
+Synopsys ARC Local Timer with Interrupt Capabilities
+- Found on all ARC CPUs (ARC700/ARCHS)
+- Can be optionally programmed to interrupt on Limit
+- Two identical copies TIMER0 and TIMER1 exist in ARC cores and historically
+  TIMER0 used as clockevent provider (true for all ARC cores)
+  TIMER1 used for clocksource (mandatory for ARC700, optional for ARC HS)
+
+Required properties:
+
+- compatible : should be "snps,arc-timer"
+- interrupts : single Interrupt going into parent intc
+	       (16 for ARCHS cores, 3 for ARC700 cores)
+- clocks     : phandle to the source clock
+
+Example:
+
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt b/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt
new file mode 100644
index 0000000000..b6cd1b3922
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/snps,archs-gfrc.txt
@@ -0,0 +1,14 @@
+Synopsys ARC Free Running 64-bit Global Timer for ARC HS CPUs
+- clocksource provider for SMP SoC
+
+Required properties:
+
+- compatible : should be "snps,archs-gfrc"
+- clocks     : phandle to the source clock
+
+Example:
+
+	gfrc {
+		compatible = "snps,archs-gfrc";
+		clocks = <&core_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt b/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt
new file mode 100644
index 0000000000..47bd7a702f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/snps,archs-rtc.txt
@@ -0,0 +1,14 @@
+Synopsys ARC Free Running 64-bit Local Timer for ARC HS CPUs
+- clocksource provider for UP SoC
+
+Required properties:
+
+- compatible : should be "snps,archs-rtc"
+- clocks     : phandle to the source clock
+
+Example:
+
+	rtc {
+		compatible = "snps,arc-rtc";
+		clocks = <&core_clk>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
new file mode 100644
index 0000000000..d33c9205a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/snps,dw-apb-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB Timer
+
+maintainers:
+  - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dw-apb-timer
+      - enum:
+          - snps,dw-apb-timer-sp
+          - snps,dw-apb-timer-osc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Timer ticks reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: timer
+      - const: pclk
+
+  clock-frequency: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+oneOf:
+  - required:
+      - clocks
+      - clock-names
+  - required:
+      - clock-frequency
+  - required:
+      - clock-freq
+
+examples:
+  - |
+    timer@ffe00000 {
+      compatible = "snps,dw-apb-timer";
+      interrupts = <0 170 4>;
+      reg = <0xffe00000 0x1000>;
+      clocks = <&timer_clk>, <&timer_pclk>;
+      clock-names = "timer", "pclk";
+    };
+  - |
+    timer@ffe00000 {
+      compatible = "snps,dw-apb-timer";
+      interrupts = <0 170 4>;
+      reg = <0xffe00000 0x1000>;
+      clocks = <&timer_clk>;
+      clock-names = "timer";
+    };
+  - |
+    timer@ffe00000 {
+      compatible = "snps,dw-apb-timer";
+      interrupts = <0 170 4>;
+      reg = <0xffe00000 0x1000>;
+      clock-frequency = <25000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
new file mode 100644
index 0000000000..ac44c4b675
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
@@ -0,0 +1,17 @@
+Milbeaut SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "socionext,milbeaut-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer.
+- clocks: phandle to the input clk.
+
+Example:
+
+timer {
+	compatible = "socionext,milbeaut-timer";
+	reg = <0x1e000050 0x20>
+	interrupts = <0 91 4>;
+	clocks = <&clk 4>;
+};
diff --git a/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt b/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt
new file mode 100644
index 0000000000..6d97e7d0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt
@@ -0,0 +1,20 @@
+Spreadtrum timers
+
+The Spreadtrum SC9860 platform provides 3 general-purpose timers.
+These timers can support 32bit or 64bit counter, as well as supporting
+period mode or one-shot mode, and they are can be wakeup source
+during deep sleep.
+
+Required properties:
+- compatible: should be "sprd,sc9860-timer" for SC9860 platform.
+- reg: The register address of the timer device.
+- interrupts: Should contain the interrupt for the timer device.
+- clocks: The phandle to the source clock (usually a 32.768 KHz fixed clock).
+
+Example:
+	timer@40050000 {
+		compatible = "sprd,sc9860-timer";
+		reg = <0 0x40050000 0 0x20>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&ext_32k>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml
new file mode 100644
index 0000000000..fa65878b35
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/st,nomadik-mtu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik Multi-Timer Unit MTU Timer
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the ST Microelectronics Nomadik
+  SoCs STn8800, STn8810 and STn8815 as well as in ST-Ericsson DB8500.
+
+properties:
+  compatible:
+    items:
+      - const: st,nomadik-mtu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The first clock named TIMCLK clocks the actual timers and
+      the second clock clocks the digital interface to the interconnect.
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: timclk
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    timer@a03c6000 {
+      compatible = "st,nomadik-mtu";
+      reg = <0xa03c6000 0x1000>;
+      interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+      clock-names = "timclk", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/st,spear-timer.txt b/Documentation/devicetree/bindings/timer/st,spear-timer.txt
new file mode 100644
index 0000000000..b5238a07da
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,spear-timer.txt
@@ -0,0 +1,16 @@
+* SPEAr ARM Timer
+
+** Timer node required properties:
+
+- compatible : Should be:
+	"st,spear-timer"
+- reg: Address range of the timer registers
+- interrupt: Should contain the timer interrupt number
+
+Example:
+
+	timer@f0000000 {
+		compatible = "st,spear-timer";
+		reg = <0xf0000000 0x400>;
+		interrupts = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/st,stih407-lpc b/Documentation/devicetree/bindings/timer/st,stih407-lpc
new file mode 100644
index 0000000000..72acb487b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,stih407-lpc
@@ -0,0 +1,28 @@
+STMicroelectronics Low Power Controller (LPC) - Clocksource
+===========================================================
+
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
+
+[See: ../watchdog/st_lpc_wdt.txt for Watchdog options]
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+
+Required properties
+
+- compatible   : Must be: "st,stih407-lpc"
+- reg          : LPC registers base address + size
+- interrupts   : LPC interrupt line number and associated flags
+- clocks       : Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode  : The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
+
+Example:
+       lpc@fde05000 {
+               compatible      = "st,stih407-lpc";
+               reg             = <0xfde05000 0x1000>;
+               clocks          = <&clk_s_d3_flexgen CLK_LPC_0>;
+               st,lpc-mode     = <ST_LPC_MODE_CLKSRC>;
+       };
diff --git a/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml b/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
new file mode 100644
index 0000000000..9ec1153762
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,stm32-timer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/st,stm32-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 general-purpose 16 and 32 bits timers
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    timer: timer@40000c00 {
+        compatible = "st,stm32-timer";
+        reg = <0x40000c00 0x400>;
+        interrupts = <50>;
+        clocks = <&clk_pmtr1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 0000000000..29bf91ccf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,37 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values.
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+		   "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+		   "cmpint7" ("cmpintX" may be omitted if not present in the
+		   hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+	clocksource: timer@20000 {
+		compatible = "ti,da830-timer";
+		reg = <0x20000 0x1000>;
+		interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+			     <80>, <81>;
+		interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+				  "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+				  "cmpint6", "cmpint7";
+		clocks = <&pll0_auxclk>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
new file mode 100644
index 0000000000..d3905a5412
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,keystone-timer.txt
@@ -0,0 +1,29 @@
+* Device tree bindings for Texas instruments Keystone timer
+
+This document provides bindings for the 64-bit timer in the KeyStone
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+It is global timer is a free running up-counter and can generate interrupt
+when the counter reaches preset counter values.
+
+Documentation:
+https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+Required properties:
+
+- compatible : should be "ti,keystone-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupt generated by the timer.
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+timer@22f0000 {
+	compatible = "ti,keystone-timer";
+	reg = <0x022f0000 0x80>;
+	interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&clktimer15>;
+};
diff --git a/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
new file mode 100644
index 0000000000..acbb6f8997
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,timer-dm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual-mode timer
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI dual-mode timer is a general purpose timer with PWM capabilities.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,am335x-timer
+              - ti,am335x-timer-1ms
+              - ti,am654-timer
+              - ti,dm814-timer
+              - ti,dm816-timer
+              - ti,omap2420-timer
+              - ti,omap3430-timer
+              - ti,omap4430-timer
+              - ti,omap5430-timer
+      - items:
+          - const: ti,am4372-timer
+          - const: ti,am335x-timer
+      - items:
+          - const: ti,am4372-timer-1ms
+          - const: ti,am335x-timer-1ms
+
+  reg:
+    items:
+      - description: IO address
+      - description: L3 to L4 mapping for omap4/5 L4 ABE
+    minItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: System clock for omap4/5 and dra7
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+      - const: timer_sys_ck
+    minItems: 1
+
+  power-domains:
+    description:
+      Power domain if available
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt if available. The timer PWM features may be usable
+      in a limited way even without interrupts.
+    maxItems: 1
+
+  ti,timer-alwon:
+    description:
+      Timer is always enabled when the SoC is powered. Note that some SoCs like
+      am335x can suspend to PM coprocessor RTC only mode and in that case the
+      SoC power is cut including timers.
+    type: boolean
+
+  ti,timer-dsp:
+    description:
+      Timer is routable to the DSP in addition to the operating system.
+    type: boolean
+
+  ti,timer-pwm:
+    description:
+      Timer has been wired for PWM capability.
+    type: boolean
+
+  ti,timer-secure:
+    description:
+      Timer access has been limited to secure mode only.
+    type: boolean
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with timer. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am654-timer
+    then:
+      required:
+        - power-domains
+    else:
+      required:
+        - interrupts
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,omap3430-timer
+                - ti,omap4430-timer
+                - ti,omap5430-timer
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,dm814-timer
+              - ti,dm816-timer
+              - ti,omap2420-timer
+              - ti,omap3430-timer
+    then:
+      properties:
+        ti,hwmods:
+          items:
+            - pattern: "^timer([1-9]|1[0-2])$"
+    else:
+      properties:
+        ti,hwmods: false
+
+examples:
+  - |
+    timer1: timer@0 {
+      compatible = "ti,am335x-timer-1ms";
+      reg = <0x0 0x400>;
+      interrupts = <67>;
+      ti,timer-alwon;
+      clocks = <&timer1_fck>;
+      clock-names = "fck";
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/via,vt8500-timer.txt b/Documentation/devicetree/bindings/timer/via,vt8500-timer.txt
new file mode 100644
index 0000000000..901c73f0d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/via,vt8500-timer.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Timer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-timer"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : interrupt for the timer
+
+Example:
+
+	timer@d8130100 {
+		compatible = "via,vt8500-timer";
+		reg = <0xd8130100 0x28>;
+		interrupts = <36>;
+	};
diff --git a/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml b/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml
new file mode 100644
index 0000000000..b1597db042
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/xlnx,xps-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE IP AXI Timer
+
+maintainers:
+  - Sean Anderson <sean.anderson@seco.com>
+
+properties:
+  compatible:
+    contains:
+      const: xlnx,xps-timer-1.00.a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells': true
+
+  xlnx,count-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32]
+    default: 32
+    description:
+      The width of the counter(s), in bits.
+
+  xlnx,one-timer-only:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Whether only one timer is present in this block.
+
+required:
+  - compatible
+  - reg
+  - xlnx,one-timer-only
+
+allOf:
+  - if:
+      required:
+        - '#pwm-cells'
+    then:
+      allOf:
+        - required:
+            - clocks
+        - properties:
+            xlnx,one-timer-only:
+              const: 0
+    else:
+      required:
+        - interrupts
+  - if:
+      required:
+        - clocks
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@800e0000 {
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        interrupts = <0 39 2>;
+        xlnx,count-width = <16>;
+        xlnx,one-timer-only = <0x0>;
+    };
+
+    timer@800f0000 {
+        #pwm-cells = <0>;
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        xlnx,count-width = <32>;
+        xlnx,one-timer-only = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
new file mode 100644
index 0000000000..95f42acd0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hardware-timestamps-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware timestamp providers
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Some devices/SoCs have hardware timestamp engines (HTE) which can use
+  hardware means to timestamp entity in realtime. The entity could be anything
+  from GPIOs, IRQs, Bus and so on. The hardware timestamp engine present
+  itself as a provider with the bindings described in this document.
+
+properties:
+  $nodename:
+    pattern: "^timestamp(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  "#timestamp-cells":
+    description:
+      Number of cells in a HTE specifier.
+
+required:
+  - "#timestamp-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
new file mode 100644
index 0000000000..5142d6d4fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hte-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTE Consumer
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+select: true
+
+properties:
+  timestamps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The list of HTE provider phandle. The first cell must represent the
+      provider phandle followed by the line identifiers. The meaning of the
+      line identifier and exact number of arguments must be specified in the
+      HTE provider device tree binding document.
+
+  timestamp-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      An optional string property to label each line specifier present in the
+      timestamp property.
+
+dependencies:
+  timestamp-names: [ timestamps ]
+
+additionalProperties: true
+
+examples:
+  - |
+    hte_tegra_consumer {
+              timestamps = <&tegra_hte_aon 0x9>, <&tegra_hte_lic 0x19>;
+              timestamp-names = "hte-gpio", "hte-i2c";
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
new file mode 100644
index 0000000000..456797967a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/nvidia,tegra194-hte.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra on chip generic hardware timestamping engine (HTE) provider
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Tegra SoC has two instances of generic hardware timestamping engines (GTE)
+  known as GTE GPIO and GTE IRQ, which can monitor subset of GPIO and on chip
+  IRQ lines for the state change respectively, upon detection it will record
+  timestamp (taken from system counter) in its internal hardware FIFO. It has
+  a bitmap array arranged in 32bit slices where each bit represent signal/line
+  to enable or disable for the hardware timestamping. The GTE GPIO monitors
+  GPIO lines from the AON (always on) GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-gte-aon
+      - nvidia,tegra194-gte-lic
+      - nvidia,tegra234-gte-aon
+      - nvidia,tegra234-gte-lic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvidia,int-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HTE device generates its interrupt based on this u32 FIFO threshold
+      value. The recommended value is 1.
+    minimum: 1
+    maximum: 256
+
+  nvidia,slices:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      HTE lines are arranged in 32 bit slice where each bit represents different
+      line/signal that it can enable/configure for the timestamp. It is u32
+      property and the value depends on the HTE instance in the chip. The AON
+      GTE instances for both Tegra194 and Tegra234 has 3 slices. The Tegra194
+      LIC instance has 11 slices and Tegra234 LIC has 17 slices.
+    enum: [3, 11, 17]
+
+  nvidia,gpio-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to AON gpio controller instance. This is required to handle
+      namespace conversion between GPIO and GTE.
+
+  '#timestamp-cells':
+    description:
+      This represents number of line id arguments as specified by the
+      consumers. For the GTE IRQ, this is IRQ number as mentioned in the
+      SoC technical reference manual. For the GTE GPIO, its value is same as
+      mentioned in the nvidia GPIO device tree binding document.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#timestamp-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-gte-aon
+              - nvidia,tegra234-gte-aon
+    then:
+      properties:
+        nvidia,slices:
+          const: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-gte-lic
+    then:
+      properties:
+        nvidia,slices:
+          const: 11
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-gte-lic
+    then:
+      properties:
+        nvidia,slices:
+          const: 17
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-gte-aon
+    then:
+      required:
+        - nvidia,gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    tegra_hte_aon: timestamp@c1e0000 {
+              compatible = "nvidia,tegra194-gte-aon";
+              reg = <0xc1e0000 0x10000>;
+              interrupts = <0 13 0x4>;
+              nvidia,int-threshold = <1>;
+              #timestamp-cells = <1>;
+    };
+
+  - |
+    tegra_hte_lic: timestamp@3aa0000 {
+              compatible = "nvidia,tegra194-gte-lic";
+              reg = <0x3aa0000 0x10000>;
+              interrupts = <0 11 0x4>;
+              nvidia,int-threshold = <1>;
+              #timestamp-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
new file mode 100644
index 0000000000..430a814f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -0,0 +1,419 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/trivial-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trivial I2C and SPI devices
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  This is a list of trivial I2C and SPI devices that have simple device tree
+  bindings, consisting only of a compatible field, an address and possibly an
+  interrupt line.
+
+  If a device needs more specific bindings, such as properties to
+  describe some aspect of it, there needs to be a specific binding
+  document for it just like any other devices.
+
+properties:
+  reg:
+    maxItems: 1
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  compatible:
+    items:
+      - enum:
+            # Acbel fsg032 power supply
+          - acbel,fsg032
+            # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
+          - ad,ad7414
+            # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
+          - ad,adm9240
+            # AD5110 - Nonvolatile Digital Potentiometer
+          - adi,ad5110
+            # Analog Devices ADP5585 Keypad Decoder and I/O Expansion
+          - adi,adp5585
+            # Analog Devices ADP5585 Keypad Decoder and I/O Expansion with support for Row5
+          - adi,adp5585-02
+            # Analog Devices ADP5589 Keypad Decoder and I/O Expansion
+          - adi,adp5589
+            # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher
+          - adi,lt7182s
+            # AMS iAQ-Core VOC Sensor
+          - ams,iaq-core
+            # i2c serial eeprom (24cxx)
+          - at,24c08
+            # i2c trusted platform module (TPM)
+          - atmel,at97sc3204t
+            # ATSHA204 - i2c h/w symmetric crypto module
+          - atmel,atsha204
+            # ATSHA204A - i2c h/w symmetric crypto module
+          - atmel,atsha204a
+            # i2c h/w elliptic curve crypto module
+          - atmel,atecc508a
+            # BPA-RS600: Power Supply
+          - blutek,bpa-rs600
+            # Bosch Sensortec pressure, temperature, humididty and VOC sensor
+          - bosch,bme680
+            # CM32181: Ambient Light Sensor
+          - capella,cm32181
+            # CM3232: Ambient Light Sensor
+          - capella,cm3232
+            # CM3323: Ambient Light Sensor
+          - capella,cm3323
+            # Cisco SPI Petra
+          - cisco,spi-petra
+            # High-Precision Digital Thermometer
+          - dallas,ds1631
+            # Total-Elapsed-Time Recorder with Alarm
+          - dallas,ds1682
+            # Tiny Digital Thermometer and Thermostat
+          - dallas,ds1775
+            # CPU Peripheral Monitor
+          - dallas,ds1780
+            # CPU Supervisor with Nonvolatile Memory and Programmable I/O
+          - dallas,ds4510
+            # Digital Thermometer and Thermostat
+          - dallas,ds75
+            # Delta AHE-50DC Open19 power shelf fan control module
+          - delta,ahe50dc-fan
+            # Delta Electronics DPS-650-AB power supply
+          - delta,dps650ab
+            # Delta Electronics DPS920AB 920W 54V Power Supply
+          - delta,dps920ab
+            # 1/4 Brick DC/DC Regulated Power Module
+          - delta,q54sj108a2
+            # Devantech SRF02 ultrasonic ranger in I2C mode
+          - devantech,srf02
+            # Devantech SRF08 ultrasonic ranger
+          - devantech,srf08
+            # Devantech SRF10 ultrasonic ranger
+          - devantech,srf10
+            # DH electronics GmbH on-board CPLD trivial SPI device
+          - dh,dhcom-board
+            # DA9053: flexible system level PMIC with multicore support
+          - dlg,da9053
+            # DMARD05: 3-axis I2C Accelerometer
+          - domintech,dmard05
+            # DMARD06: 3-axis I2C Accelerometer
+          - domintech,dmard06
+            # DMARD05: 3-axis I2C Accelerometer
+          - domintech,dmard07
+            # DMARD09: 3-axis Accelerometer
+          - domintech,dmard09
+            # DMARD10: 3-axis Accelerometer
+          - domintech,dmard10
+            # MMA7660FC: 3-Axis Orientation/Motion Detection Sensor
+          - fsl,mma7660
+            # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
+          - fsl,mma8450
+            # MPL3115: Absolute Digital Pressure Sensor
+          - fsl,mpl3115
+            # MPR121: Proximity Capacitive Touch Sensor Controller
+          - fsl,mpr121
+            # Monolithic Power Systems Inc. multi-phase controller mp2888
+          - mps,mp2888
+            # Monolithic Power Systems Inc. multi-phase controller mp2971
+          - mps,mp2971
+            # Monolithic Power Systems Inc. multi-phase controller mp2973
+          - mps,mp2973
+            # Monolithic Power Systems Inc. multi-phase controller mp2975
+          - mps,mp2975
+            # Honeywell Humidicon HIH-6130 humidity/temperature sensor
+          - honeywell,hi6130
+            # IBM Common Form Factor Power Supply Versions (all versions)
+          - ibm,cffps
+            # IBM Common Form Factor Power Supply Versions 1
+          - ibm,cffps1
+            # IBM Common Form Factor Power Supply Versions 2
+          - ibm,cffps2
+            # Infineon IR36021 digital POL buck controller
+          - infineon,ir36021
+            # Infineon IR38060 Voltage Regulator
+          - infineon,ir38060
+            # Infineon IR38064 Voltage Regulator
+          - infineon,ir38064
+            # Infineon IR38164 Voltage Regulator
+          - infineon,ir38164
+            # Infineon IR38263 Voltage Regulator
+          - infineon,ir38263
+            # Infineon IRPS5401 Voltage Regulator (PMIC)
+          - infineon,irps5401
+            # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
+          - infineon,slb9635tt
+            # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
+          - infineon,slb9645tt
+            # Infineon SLB9673 I2C TPM 2.0
+          - infineon,slb9673
+            # Infineon TDA38640 Voltage Regulator
+          - infineon,tda38640
+            # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
+          - infineon,tlv493d-a1b6
+            # Infineon Multi-phase Digital VR Controller xdpe11280
+          - infineon,xdpe11280
+            # Infineon Multi-phase Digital VR Controller xdpe12254
+          - infineon,xdpe12254
+            # Infineon Multi-phase Digital VR Controller xdpe12284
+          - infineon,xdpe12284
+            # Infineon Multi-phase Digital VR Controller xdpe15284
+          - infineon,xdpe15284
+            # Infineon Multi-phase Digital VR Controller xdpe152c4
+          - infineon,xdpe152c4
+            # Injoinic IP5108 2.0A Power Bank IC with I2C
+          - injoinic,ip5108
+            # Injoinic IP5109 2.1A Power Bank IC with I2C
+          - injoinic,ip5109
+            # Injoinic IP5207 1.2A Power Bank IC with I2C
+          - injoinic,ip5207
+            # Injoinic IP5209 2.4A Power Bank IC with I2C
+          - injoinic,ip5209
+            # Inspur Power System power supply unit version 1
+          - inspur,ipsps1
+            # Intersil ISL29028 Ambient Light and Proximity Sensor
+          - isil,isl29028
+            # Intersil ISL29030 Ambient Light and Proximity Sensor
+          - isil,isl29030
+            # Intersil ISL68137 Digital Output Configurable PWM Controller
+          - isil,isl68137
+            # Linear Technology LTC2488
+          - lineartechnology,ltc2488
+            # 5 Bit Programmable, Pulse-Width Modulator
+          - maxim,ds1050
+            # 10 kOhm digital potentiometer with I2C interface
+          - maxim,ds1803-010
+            # 50 kOhm digital potentiometer with I2C interface
+          - maxim,ds1803-050
+            # 100 kOhm digital potentiometer with I2C interface
+          - maxim,ds1803-100
+            # 10 kOhm digital potentiometer with I2C interface
+          - maxim,ds3502
+            # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
+          - maxim,max1237
+            # Temperature Sensor, I2C interface
+          - maxim,max1619
+            # 10-bit 10 kOhm linear programmable voltage divider
+          - maxim,max5481
+            # 10-bit 50 kOhm linear programmable voltage divider
+          - maxim,max5482
+            # 10-bit 10 kOhm linear programmable variable resistor
+          - maxim,max5483
+            # 10-bit 50 kOhm linear programmable variable resistor
+          - maxim,max5484
+            # PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion
+          - maxim,max6621
+            # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
+          - maxim,max6625
+            # 3-Channel Remote Temperature Sensor
+          - maxim,max31730
+            # mCube 3-axis 8-bit digital accelerometer
+          - mcube,mc3230
+            # Measurement Specialities I2C temperature and humidity sensor
+          - meas,htu21
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5637
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5803
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5805
+            # Measurement Specialities I2C pressure and temperature sensor
+          - meas,ms5837
+            # Measurement Specialities temp and humidity part of ms8607 device
+          - meas,ms8607-humidity
+            # Measurement Specialities temp and pressure part of ms8607 device
+          - meas,ms8607-temppressure
+            # Measurement Specialties temperature sensor
+          - meas,tsys01
+            # MEMSIC magnetometer
+          - memsic,mmc35240
+            # MEMSIC 3-axis accelerometer
+          - memsic,mxc4005
+            # MEMSIC 2-axis 8-bit digital accelerometer
+          - memsic,mxc6225
+            # MEMSIC 2-axis 8-bit digital accelerometer
+          - memsic,mxc6255
+            # MEMSIC 3-axis accelerometer
+          - memsic,mxc6655
+            # Menlo on-board CPLD trivial SPI device
+          - menlo,m53cpld
+            # Micron SPI NOR Authenta
+          - micron,spi-authenta
+            # Microchip differential I2C ADC, 1 Channel, 18 bit
+          - microchip,mcp3421
+            # Microchip differential I2C ADC, 2 Channel, 18 bit
+          - microchip,mcp3422
+            # Microchip differential I2C ADC, 2 Channel, 18 bit
+          - microchip,mcp3423
+            # Microchip differential I2C ADC, 4 Channel, 18 bit
+          - microchip,mcp3424
+            # Microchip differential I2C ADC, 1 Channel, 16 bit
+          - microchip,mcp3425
+            # Microchip differential I2C ADC, 2 Channel, 16 bit
+          - microchip,mcp3426
+            # Microchip differential I2C ADC, 2 Channel, 16 bit
+          - microchip,mcp3427
+            # Microchip differential I2C ADC, 4 Channel, 16 bit
+          - microchip,mcp3428
+            # Microchip 7-bit Single I2C Digital POT (5k)
+          - microchip,mcp4017-502
+            # Microchip 7-bit Single I2C Digital POT (10k)
+          - microchip,mcp4017-103
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4017-503
+            # Microchip 7-bit Single I2C Digital POT (100k)
+          - microchip,mcp4017-104
+            # Microchip 7-bit Single I2C Digital POT (5k)
+          - microchip,mcp4018-502
+            # Microchip 7-bit Single I2C Digital POT (10k)
+          - microchip,mcp4018-103
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4018-503
+            # Microchip 7-bit Single I2C Digital POT (100k)
+          - microchip,mcp4018-104
+            # Microchip 7-bit Single I2C Digital POT (5k)
+          - microchip,mcp4019-502
+            # Microchip 7-bit Single I2C Digital POT (10k)
+          - microchip,mcp4019-103
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4019-503
+            # Microchip 7-bit Single I2C Digital POT (100k)
+          - microchip,mcp4019-104
+            # PWM Fan Speed Controller With Fan Fault Detection
+          - microchip,tc654
+            # PWM Fan Speed Controller With Fan Fault Detection
+          - microchip,tc655
+            # MiraMEMS DA226 2-axis 14-bit digital accelerometer
+          - miramems,da226
+            # MiraMEMS DA280 3-axis 14-bit digital accelerometer
+          - miramems,da280
+            # MiraMEMS DA311 3-axis 12-bit digital accelerometer
+          - miramems,da311
+            # Temperature sensor with integrated fan control
+          - national,lm63
+            # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
+          - national,lm80
+            # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
+          - national,lm81
+            # Temperature sensor with integrated fan control
+          - national,lm85
+            # I2C ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator
+          - national,lm92
+            # i2c trusted platform module (TPM)
+          - nuvoton,npct501
+            # i2c trusted platform module (TPM2)
+          - nuvoton,npct601
+            # Nuvoton Temperature Sensor
+          - nuvoton,w83773g
+            # OKI ML86V7667 video decoder
+          - oki,ml86v7667
+            # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus
+          - ovti,ov5642
+            # 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
+          - plx,pex8648
+            # Pulsedlight LIDAR range-finding sensor
+          - pulsedlight,lidar-lite-v2
+            # Renesas HS3001 Temperature and Relative Humidity Sensors
+          - renesas,hs3001
+            # Renesas ISL29501 time-of-flight sensor
+          - renesas,isl29501
+            # Rohm DH2228FV
+          - rohm,dh2228fv
+            # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
+          - samsung,24ad0xd1
+            # Samsung Exynos SoC SATA PHY I2C device
+          - samsung,exynos-sataphy-i2c
+            # Semtech sx1301 baseband processor
+          - semtech,sx1301
+            # Sensirion low power multi-pixel gas sensor with I2C interface
+          - sensirion,sgpc3
+            # Sensirion multi-pixel gas sensor with I2C interface
+          - sensirion,sgp30
+            # Sensirion gas sensor with I2C interface
+          - sensirion,sgp40
+            # Sensirion temperature & humidity sensor with I2C interface
+          - sensirion,sht4x
+            # Sensortek 3 axis accelerometer
+          - sensortek,stk8312
+            # Sensortek 3 axis accelerometer
+          - sensortek,stk8ba50
+            # SGX Sensortech VZ89X Sensors
+          - sgx,vz89x
+            # Silicon Labs EM3581 Zigbee SoC with SPI interface
+          - silabs,em3581
+            # Silicon Labs SI3210 Programmable CMOS SLIC/CODEC with SPI interface
+          - silabs,si3210
+            # Relative Humidity and Temperature Sensors
+          - silabs,si7020
+            # Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply
+          - skyworks,sky81452
+            # Socionext SynQuacer TPM MMIO module
+          - socionext,synquacer-tpm-mmio
+            # SparkFun Qwiic Joystick (COM-15168) with i2c interface
+          - sparkfun,qwiic-joystick
+            # i2c serial eeprom (24cxx)
+          - st,24c256
+            # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
+          - taos,tsl2550
+            # Temperature Monitoring and Fan Control
+          - ti,amc6821
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1000
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1008
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1010
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1050
+            # Temperature and humidity sensor with i2c interface
+          - ti,hdc1080
+            # Thermometer with SPI interface
+          - ti,lm70
+          - ti,lm71
+            # Temperature sensor with 2-wire interface
+          - ti,lm73
+            # Thermometer with SPI interface
+          - ti,lm74
+            # Temperature sensor with integrated fan control
+          - ti,lm96000
+            # I2C Touch-Screen Controller
+          - ti,tsc2003
+            # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+          - ti,tmp103
+            # Thermometer with SPI interface
+          - ti,tmp121
+          - ti,tmp122
+          - ti,tmp125
+            # Digital Temperature Sensor
+          - ti,tmp275
+            # TI DC-DC converter on PMBus
+          - ti,tps40400
+            # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
+          - ti,tps53676
+            # TI Dual channel DCAP+ multiphase controller TPS53679
+          - ti,tps53679
+            # TI Dual channel DCAP+ multiphase controller TPS53688
+          - ti,tps53688
+            # TI DC-DC converters on PMBus
+          - ti,tps544b20
+          - ti,tps544b25
+          - ti,tps544c20
+          - ti,tps544c25
+            # Winbond/Nuvoton H/W Monitor
+          - winbond,w83793
+            # Vicor Corporation Digital Supervisor
+          - vicor,pli1209bc
+            # i2c trusted platform module (TPM)
+          - winbond,wpct301
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
new file mode 100644
index 0000000000..835e17269d
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/cdns,ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - cdns,ufshc
+          - cdns,ufshc-m31-16nm
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - cdns,ufshc
+            # CDNS UFS HC + M31 16nm PHY
+          - cdns,ufshc-m31-16nm
+      - const: jedec,ufs-2.0
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core_clk
+      - const: phy_clk
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ufs@fd030000 {
+        compatible = "cdns,ufshc", "jedec,ufs-2.0";
+        reg = <0xfd030000 0x10000>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+        freq-table-hz = <0 0>, <0 0>;
+        clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
+        clock-names = "core_clk", "phy_clk";
+    };
diff --git a/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
new file mode 100644
index 0000000000..4432bfa0cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/hisilicon,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - hisilicon,hi3660-ufs
+          - hisilicon,hi3670-ufs
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-ufs
+          - const: jedec,ufs-1.1
+      - items:
+          - enum:
+              - hisilicon,hi3670-ufs
+          - const: jedec,ufs-2.1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: phy_clk
+
+  reg:
+    items:
+      - description: UFS register address space
+      - description: UFS SYS CTRL register address space
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+            reg = <0x0 0xff3c0000 0x0 0x1000>,
+                  <0x0 0xff3e0000 0x0 0x1000>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+                     <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+            clock-names = "ref_clk", "phy_clk";
+            freq-table-hz = <0 0>,
+                            <0 0>;
+
+            resets = <&crg_rst 0x84 12>;
+            reset-names = "rst";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
new file mode 100644
index 0000000000..32fd535a51
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Stanley Chu <stanley.chu@mediatek.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-ufshci
+      - mediatek,mt8192-ufshci
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ufs
+
+  phys:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - phys
+  - reg
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "mediatek,mt8183-ufshci";
+            reg = <0 0x11270000 0 0x2300>;
+            interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+            phys = <&ufsphy>;
+
+            clocks = <&infracfg_ao CLK_INFRA_UFS>;
+            clock-names = "ufs";
+            freq-table-hz = <0 0>;
+
+            vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
new file mode 100644
index 0000000000..462ead5a1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -0,0 +1,322 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Andy Gross <agross@kernel.org>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+  properties:
+    compatible:
+      contains:
+        const: qcom,ufshc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8994-ufshc
+          - qcom,msm8996-ufshc
+          - qcom,msm8998-ufshc
+          - qcom,sa8775p-ufshc
+          - qcom,sc8280xp-ufshc
+          - qcom,sdm845-ufshc
+          - qcom,sm6115-ufshc
+          - qcom,sm6350-ufshc
+          - qcom,sm8150-ufshc
+          - qcom,sm8250-ufshc
+          - qcom,sm8350-ufshc
+          - qcom,sm8450-ufshc
+          - qcom,sm8550-ufshc
+      - const: qcom,ufshc
+      - const: jedec,ufs-2.0
+
+  clocks:
+    minItems: 8
+    maxItems: 11
+
+  clock-names:
+    minItems: 8
+    maxItems: 11
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ufs-ddr
+      - const: cpu-ufs
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: ufsphy
+
+  power-domains:
+    maxItems: 1
+
+  qcom,ice:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the Inline Crypto Engine node
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: std
+      - const: ice
+
+  required-opps:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the RESET pin of the UFS memory device.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: ufs-common.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-ufshc
+              - qcom,sa8775p-ufshc
+              - qcom,sc8280xp-ufshc
+              - qcom,sm8250-ufshc
+              - qcom,sm8350-ufshc
+              - qcom,sm8450-ufshc
+              - qcom,sm8550-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: rx_lane1_sync_clk
+        reg:
+          minItems: 1
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-ufshc
+              - qcom,sm6350-ufshc
+              - qcom,sm8150-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: rx_lane1_sync_clk
+            - const: ice_core_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+      required:
+        - reg-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: core_clk_src
+            - const: core_clk
+            - const: bus_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro_src
+            - const: core_clk_unipro
+            - const: core_clk_ice
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          minItems: 1
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: ice_core_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+      required:
+        - reg-names
+
+    # TODO: define clock bindings for qcom,msm8994-ufshc
+
+  - if:
+      required:
+        - qcom,ice
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        clocks:
+          minItems: 8
+          maxItems: 11
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@1d84000 {
+            compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+                         "jedec,ufs-2.0";
+            reg = <0 0x01d84000 0 0x3000>;
+            interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&ufs_mem_phy_lanes>;
+            phy-names = "ufsphy";
+            lanes-per-direction = <2>;
+            #reset-cells = <1>;
+            resets = <&gcc GCC_UFS_PHY_BCR>;
+            reset-names = "rst";
+            reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+            vcc-supply = <&vreg_l7b_2p5>;
+            vcc-max-microamp = <1100000>;
+            vccq-supply = <&vreg_l9b_1p2>;
+            vccq-max-microamp = <1200000>;
+
+            power-domains = <&gcc UFS_PHY_GDSC>;
+            iommus = <&apps_smmu 0xe0 0x0>;
+            interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
+                            <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+            interconnect-names = "ufs-ddr", "cpu-ufs";
+
+            clock-names = "core_clk",
+                          "bus_aggr_clk",
+                          "iface_clk",
+                          "core_clk_unipro",
+                          "ref_clk",
+                          "tx_lane0_sync_clk",
+                          "rx_lane0_sync_clk",
+                          "rx_lane1_sync_clk";
+            clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+                     <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                     <&gcc GCC_UFS_PHY_AHB_CLK>,
+                     <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+                     <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+                     <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+            freq-table-hz = <75000000 300000000>,
+                            <0 0>,
+                            <0 0>,
+                            <75000000 300000000>,
+                            <75000000 300000000>,
+                            <0 0>,
+                            <0 0>,
+                            <0 0>;
+            qcom,ice = <&ice>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
new file mode 100644
index 0000000000..f04f9f61fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/renesas,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car UFS Host Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ufs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fck
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ufs: ufs@e686000 {
+            compatible = "renesas,r8a779f0-ufs";
+            reg = <0xe6860000 0x100>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+            clock-names = "fck", "ref_clk";
+            freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 1514>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
new file mode 100644
index 0000000000..88cc1e3a0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS host controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+
+description: |
+  Each Samsung UFS host controller instance should have its own node.
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-ufs
+      - samsung,exynosautov9-ufs
+      - samsung,exynosautov9-ufs-vh
+      - tesla,fsd-ufs
+
+  reg:
+    items:
+      - description: HCI register
+      - description: vendor specific register
+      - description: unipro register
+      - description: UFS protector register
+
+  reg-names:
+    items:
+      - const: hci
+      - const: vs_hci
+      - const: unipro
+      - const: ufsp
+
+  clocks:
+    items:
+      - description: ufs link core clock
+      - description: unipro main clock
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: sclk_unipro_main
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: ufs-phy
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Should be phandle/offset pair. The phandle to the syscon node
+                 which indicates the FSYSx sysreg interface and the offset of
+                 the control register for UFS io coherency setting.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - phys
+  - phy-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    ufs: ufs@15570000 {
+       compatible = "samsung,exynos7-ufs";
+       reg = <0x15570000 0x100>,
+             <0x15570100 0x100>,
+             <0x15571000 0x200>,
+             <0x15572000 0x300>;
+       reg-names = "hci", "vs_hci", "unipro", "ufsp";
+       interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+                <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+       clock-names = "core_clk", "sclk_unipro_main";
+       pinctrl-names = "default";
+       pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+       phys = <&ufs_phy>;
+       phy-names = "ufs-phy";
+    };
+...
diff --git a/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml
new file mode 100644
index 0000000000..671a70d951
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/snps,tc-dwc-g210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - snps,dwc-ufshcd-1.40a
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - snps,g210-tc-6.00-20bit
+          - snps,g210-tc-6.00-40bit
+      - const: snps,dwc-ufshcd-1.40a
+      - const: jedec,ufs-2.0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ufs@d0000000 {
+        compatible = "snps,g210-tc-6.00-40bit",
+                     "snps,dwc-ufshcd-1.40a",
+                     "jedec,ufs-2.0";
+        reg = <0xd0000000 0x10000>;
+        interrupts = <24>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/sprd,ums9620-ufs.yaml b/Documentation/devicetree/bindings/ufs/sprd,ums9620-ufs.yaml
new file mode 100644
index 0000000000..36a8ae7794
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/sprd,ums9620-ufs.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/sprd,ums9620-ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Zhe Wang <zhe.wang1@unisoc.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    const: sprd,ums9620-ufs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: controller_eb
+      - const: cfg_eb
+      - const: core
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: controller
+      - const: device
+
+  vdd-mphy-supply:
+    description:
+      Phandle to vdd-mphy supply regulator node.
+
+  sprd,ufs-anlg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control ufs analog regs.
+
+  sprd,aon-apb-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of syscon used to control always-on regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ufs: ufs@22000000 {
+        compatible = "sprd,ums9620-ufs";
+        reg = <0x22000000 0x3000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        vcc-supply = <&vddemmccore>;
+        vdd-mphy-supply = <&vddufs1v2>;
+        clocks = <&apahb_gate 5>, <&apahb_gate 22>, <&aonapb_clk 52>;
+        clock-names = "controller_eb", "cfg_eb", "core";
+        assigned-clocks = <&aonapb_clk 52>;
+        assigned-clock-parents = <&g5l_pll 12>;
+        resets = <&apahb_gate 4>, <&aonapb_gate 69>;
+        reset-names = "controller", "device";
+        sprd,ufs-anlg-syscon = <&anlg_phy_g12_regs>;
+        sprd,aon-apb-syscon = <&aon_apb_regs>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
new file mode 100644
index 0000000000..c5eca7735f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ti,j721e-ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721e UFS Host Controller Glue Driver
+
+maintainers:
+  - Vignesh Raghavendra <vigneshr@ti.com>
+
+properties:
+  compatible:
+    items:
+      - const: ti,j721e-ufs
+
+  reg:
+    maxItems: 1
+    description: address of TI UFS glue registers
+
+  clocks:
+    maxItems: 1
+    description: phandle to the M-PHY clock
+
+  power-domains:
+    maxItems: 1
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+patternProperties:
+  "^ufs@[0-9a-f]+$":
+    $ref: cdns,ufshc.yaml
+    description: |
+      Cadence UFS controller node must be the child node.
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs-wrapper@4e80000 {
+            compatible = "ti,j721e-ufs";
+            reg = <0x0 0x4e80000 0x0 0x100>;
+            power-domains = <&k3_pds 277>;
+            clocks = <&k3_clks 277 1>;
+            assigned-clocks = <&k3_clks 277 1>;
+            assigned-clock-parents = <&k3_clks 277 4>;
+
+            ranges = <0x0 0x0 0x0 0x4e80000 0x0 0x14000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            ufs@4000 {
+                compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+                reg = <0x0 0x4000 0x0 0x10000>;
+                interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+                freq-table-hz = <19200000 19200000>;
+                power-domains = <&k3_pds 277>;
+                clocks = <&k3_clks 277 1>;
+                assigned-clocks = <&k3_clks 277 1>;
+                assigned-clock-parents = <&k3_clks 277 4>;
+                clock-names = "core_clk";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
new file mode 100644
index 0000000000..bbaee4f5f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - Avri Altman <avri.altman@wdc.com>
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  freq-table-hz:
+    items:
+      items:
+        - description: Minimum frequency for given clock in Hz
+        - description: Maximum frequency for given clock in Hz
+    description: |
+      Array of <min max> operating frequencies in Hz stored in the same order
+      as the clocks property. If this property is not defined or a value in the
+      array is "0" then it is assumed that the frequency is set by the parent
+      clock or a fixed rate clock source.
+
+  interrupts:
+    maxItems: 1
+
+  lanes-per-direction:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 2
+    description:
+      Number of lanes available per direction.  Note that it is assume same
+      number of lanes is used both directions at once.
+
+  vdd-hba-supply:
+    description:
+      Phandle to UFS host controller supply regulator node.
+
+  vcc-supply:
+    description:
+      Phandle to VCC supply regulator node.
+
+  vccq-supply:
+    description:
+      Phandle to VCCQ supply regulator node.
+
+  vccq2-supply:
+    description:
+      Phandle to VCCQ2 supply regulator node.
+
+  vcc-supply-1p8:
+    type: boolean
+    description:
+      For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+      boolean property when set, specifies to use low voltage range of
+      1.7-1.95V. Note for external UFS cards this property is invalid and valid
+      VCC range is always 2.7-3.6V.
+
+  vcc-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCC supply.
+
+  vccq-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCCQ supply.
+
+  vccq2-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+  freq-table-hz: [ clocks ]
+
+required:
+  - interrupts
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/unittest.txt b/Documentation/devicetree/bindings/unittest.txt
new file mode 100644
index 0000000000..9a5b311f44
--- /dev/null
+++ b/Documentation/devicetree/bindings/unittest.txt
@@ -0,0 +1,66 @@
+1) OF unittest platform device
+
+** unittest
+
+Required properties:
+- compatible: must be "unittest"
+
+All other properties are optional.
+
+Example:
+	unittest {
+		compatible = "unittest";
+	};
+
+2) OF unittest i2c adapter platform device
+
+** platform device unittest adapter
+
+Required properties:
+- compatible: must be unittest-i2c-bus
+
+Children nodes contain unittest i2c devices.
+
+Example:
+	unittest-i2c-bus {
+		compatible = "unittest-i2c-bus";
+	};
+
+3) OF unittest i2c device
+
+** I2C unittest device
+
+Required properties:
+- compatible: must be unittest-i2c-dev
+
+All other properties are optional
+
+Example:
+	unittest-i2c-dev {
+		compatible = "unittest-i2c-dev";
+	};
+
+4) OF unittest i2c mux device
+
+** I2C unittest mux
+
+Required properties:
+- compatible: must be unittest-i2c-mux
+
+Children nodes contain unittest i2c bus nodes per channel.
+
+Example:
+	unittest-i2c-mux {
+		compatible = "unittest-i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel-0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-dev {
+				reg = <8>;
+				compatible = "unittest-i2c-dev";
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
new file mode 100644
index 0000000000..f972ce976e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/allwinner,sun4i-a10-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 mUSB OTG Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun4i-a10-musb
+          - allwinner,sun6i-a31-musb
+          - allwinner,sun8i-a33-musb
+          - allwinner,sun8i-h3-musb
+          - allwinner,suniv-f1c100s-musb
+      - items:
+          - enum:
+              - allwinner,sun8i-a83t-musb
+              - allwinner,sun20i-d1-musb
+              - allwinner,sun50i-h6-musb
+          - const: allwinner,sun8i-a33-musb
+      - items:
+          - const: allwinner,sun50i-h616-musb
+          - const: allwinner,sun8i-h3-musb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: mc
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb
+
+  extcon:
+    description: Extcon specifier for the OTG PHY
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+      - peripheral
+
+  allwinner,sram:
+    description: Phandle to the device SRAM
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - phys
+  - phy-names
+  - dr_mode
+  - extcon
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun6i-a31-musb
+          - allwinner,sun8i-a33-musb
+          - allwinner,sun8i-h3-musb
+
+then:
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    usb_otg: usb@1c13000 {
+      compatible = "allwinner,sun4i-a10-musb";
+      reg = <0x01c13000 0x0400>;
+      clocks = <&ahb_gates 0>;
+      interrupts = <38>;
+      interrupt-names = "mc";
+      phys = <&usbphy 0>;
+      phy-names = "usb";
+      extcon = <&usbphy 0>;
+      dr_mode = "peripheral";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
new file mode 100644
index 0000000000..654ffc62d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -0,0 +1,200 @@
+  AM33xx MUSB
+~~~~~~~~~~~~~~~
+- compatible: ti,am33xx-usb
+- reg: offset and length of the usbss register sets
+- ti,hwmods : must be "usb_otg_hs"
+
+The glue layer contains multiple child nodes. It is required to have
+at least a control module node, USB node and a PHY node. The second USB
+node and its PHY node are optional. The DMA node is also optional.
+
+Reset module
+~~~~~~~~~~~~
+- compatible: ti,am335x-usb-ctrl-module
+- reg: offset and length of the "USB control registers" in the "Control
+  Module" block. A second offset and length for the USB wake up control
+  in the same memory block.
+- reg-names: "phy_ctrl" for the "USB control registers" and "wakeup" for
+  the USB wake up control register.
+
+USB PHY
+~~~~~~~
+compatible: ti,am335x-usb-phy
+reg: offset and length of the "USB PHY" register space
+ti,ctrl_mod: reference to the "reset module" node
+reg-names: phy
+The PHY should have a "phy" alias numbered properly in the alias
+node.
+
+USB
+~~~
+- compatible: ti,musb-am33xx
+- reg: offset and length of "USB Controller Registers", and offset and
+  length of "USB Core" register space.
+- reg-names: control for the ""USB Controller Registers" and "mc" for
+  "USB Core" register space
+- interrupts: USB interrupt number
+- interrupt-names: mc
+- dr_mode: Should be one of "host", "peripheral" or "otg".
+- mentor,multipoint: Should be "1" indicating the musb controller supports
+  multipoint. This is a MUSB configuration-specific setting.
+- mentor,num-eps: Specifies the number of endpoints. This is also a
+  MUSB configuration-specific setting. Should be set to "16"
+- mentor,ram-bits: Specifies the ram address size. Should be set to "12"
+- mentor,power: Should be "500". This signifies the controller can supply up to
+  500mA when operating in host mode.
+- phys: reference to the USB phy
+- dmas: specifies the dma channels
+- dma-names: specifies the names of the channels. Use "rxN" for receive
+  and "txN" for transmit endpoints. N specifies the endpoint number.
+
+The controller should have an "usb" alias numbered properly in the alias
+node.
+
+DMA
+~~~
+- compatible: ti,am3359-cppi41
+- reg: offset and length of the following register spaces: USBSS, USB
+  CPPI DMA Controller, USB CPPI DMA Scheduler, USB Queue Manager
+- reg-names: glue, controller, scheduler, queuemgr
+- #dma-cells: should be set to 2. The first number represents the
+  endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29
+  for endpoints 1 … 15 on instance 1). The second number is 0 for RX and
+  1 for TX transfers.
+- dma-channels: should be set to 30 representing the 15 endpoints for
+  each USB instance.
+- #dma-channels: deprecated
+
+Example:
+~~~~~~~~
+The following example contains all the nodes as used on am335x-evm:
+
+aliases {
+	usb0 = &usb0;
+	usb1 = &usb1;
+	phy0 = &usb0_phy;
+	phy1 = &usb1_phy;
+};
+
+usb: usb@47400000 {
+	compatible = "ti,am33xx-usb";
+	reg = <0x47400000 0x1000>;
+	ranges;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ti,hwmods = "usb_otg_hs";
+
+	ctrl_mod: control@44e10000 {
+		compatible = "ti,am335x-usb-ctrl-module";
+		reg = <0x44e10620 0x10
+			0x44e10648 0x4>;
+		reg-names = "phy_ctrl", "wakeup";
+	};
+
+	usb0_phy: usb-phy@47401300 {
+		compatible = "ti,am335x-usb-phy";
+		reg = <0x47401300 0x100>;
+		reg-names = "phy";
+		ti,ctrl_mod = <&ctrl_mod>;
+		#phy-cells = <0>;
+	};
+
+	usb0: usb@47401000 {
+		compatible = "ti,musb-am33xx";
+		reg = <0x47401400 0x400
+			0x47401000 0x200>;
+		reg-names = "mc", "control";
+
+		interrupts = <18>;
+		interrupt-names = "mc";
+		dr_mode = "otg"
+		mentor,multipoint = <1>;
+		mentor,num-eps = <16>;
+		mentor,ram-bits = <12>;
+		mentor,power = <500>;
+		phys = <&usb0_phy>;
+
+		dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+			&cppi41dma  2 0 &cppi41dma  3 0
+			&cppi41dma  4 0 &cppi41dma  5 0
+			&cppi41dma  6 0 &cppi41dma  7 0
+			&cppi41dma  8 0 &cppi41dma  9 0
+			&cppi41dma 10 0 &cppi41dma 11 0
+			&cppi41dma 12 0 &cppi41dma 13 0
+			&cppi41dma 14 0 &cppi41dma  0 1
+			&cppi41dma  1 1 &cppi41dma  2 1
+			&cppi41dma  3 1 &cppi41dma  4 1
+			&cppi41dma  5 1 &cppi41dma  6 1
+			&cppi41dma  7 1 &cppi41dma  8 1
+			&cppi41dma  9 1 &cppi41dma 10 1
+			&cppi41dma 11 1 &cppi41dma 12 1
+			&cppi41dma 13 1 &cppi41dma 14 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+			"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+			"rx14", "rx15",
+			"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+			"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+			"tx14", "tx15";
+	};
+
+	usb1_phy: usb-phy@47401b00 {
+		compatible = "ti,am335x-usb-phy";
+		reg = <0x47401b00 0x100>;
+		reg-names = "phy";
+		ti,ctrl_mod = <&ctrl_mod>;
+		#phy-cells = <0>;
+	};
+
+	usb1: usb@47401800 {
+		compatible = "ti,musb-am33xx";
+		reg = <0x47401c00 0x400
+			0x47401800 0x200>;
+		reg-names = "mc", "control";
+		interrupts = <19>;
+		interrupt-names = "mc";
+		dr_mode = "host"
+		mentor,multipoint = <1>;
+		mentor,num-eps = <16>;
+		mentor,ram-bits = <12>;
+		mentor,power = <500>;
+		phys = <&usb1_phy>;
+
+		dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+			&cppi41dma 17 0 &cppi41dma 18 0
+			&cppi41dma 19 0 &cppi41dma 20 0
+			&cppi41dma 21 0 &cppi41dma 22 0
+			&cppi41dma 23 0 &cppi41dma 24 0
+			&cppi41dma 25 0 &cppi41dma 26 0
+			&cppi41dma 27 0 &cppi41dma 28 0
+			&cppi41dma 29 0 &cppi41dma 15 1
+			&cppi41dma 16 1 &cppi41dma 17 1
+			&cppi41dma 18 1 &cppi41dma 19 1
+			&cppi41dma 20 1 &cppi41dma 21 1
+			&cppi41dma 22 1 &cppi41dma 23 1
+			&cppi41dma 24 1 &cppi41dma 25 1
+			&cppi41dma 26 1 &cppi41dma 27 1
+			&cppi41dma 28 1 &cppi41dma 29 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+			"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+			"rx14", "rx15",
+			"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+			"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+			"tx14", "tx15";
+	};
+
+	cppi41dma: dma-controller@7402000 {
+		compatible = "ti,am3359-cppi41";
+		reg =  <0x47400000 0x1000
+			0x47402000 0x1000
+			0x47403000 0x1000
+			0x47404000 0x4000>;
+		reg-names = "glue", "controller", "scheduler", "queuemgr";
+		interrupts = <17>;
+		interrupt-names = "glue";
+		#dma-cells = <2>;
+		dma-channels = <30>;
+		dma-requests = <256>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
new file mode 100644
index 0000000000..da757c1155
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12A DWC3 USB SoC Controller Glue
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
+  in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
+  only.
+
+  A glue connects the DWC3 core to USB2 PHYs and optionally to an USB3 PHY.
+
+  One of the USB2 PHYs can be re-routed in peripheral mode to a DWC2 USB IP.
+
+  The DWC3 Glue controls the PHY routing and power, an interrupt line is
+  connected to the Glue to serve as OTG ID change detection.
+
+  The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
+  host-only mode.
+
+  The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-usb-ctrl
+      - amlogic,meson-gxm-usb-ctrl
+      - amlogic,meson-axg-usb-ctrl
+      - amlogic,meson-g12a-usb-ctrl
+      - amlogic,meson-a1-usb-ctrl
+
+  ranges: true
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  resets:
+    minItems: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-names:
+    minItems: 1
+    maxItems: 3
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  dr_mode: true
+
+  power-domains:
+    maxItems: 1
+
+  vbus-supply:
+    description: VBUS power supply when used in OTG switchable mode
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    oneOf:
+      - $ref: dwc2.yaml#
+      - $ref: snps,dwc3.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - resets
+  - reg
+  - interrupts
+  - phy-names
+  - phys
+  - dr_mode
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          minItems: 2
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+            - const: usb3-phy0 # USB3 PHY if USB3_0 is used
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxm-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+            - const: usb2-phy2 # USB2 PHY2 if USBOTG_C port is used
+
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-a1-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: usb_bus
+            - const: xtal_usb_ctrl
+      required:
+        - clock-names
+
+examples:
+  - |
+    usb: usb@ffe09000 {
+          compatible = "amlogic,meson-g12a-usb-ctrl";
+          reg = <0xffe09000 0xa0>;
+          interrupts = <16>;
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+
+          clocks = <&clkc_usb>;
+          resets = <&reset_usb>;
+
+          dr_mode = "otg";
+
+          phys = <&usb2_phy0>, <&usb2_phy1>, <&usb3_phy0>;
+          phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+          dwc2: usb@ff400000 {
+              compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+              reg = <0xff400000 0x40000>;
+              interrupts = <31>;
+              clocks = <&clkc_usb1>;
+              clock-names = "otg";
+              phys = <&usb2_phy1>;
+              dr_mode = "peripheral";
+              g-rx-fifo-size = <192>;
+              g-np-tx-fifo-size = <128>;
+              g-tx-fifo-size = <128 128 16 16 16>;
+          };
+
+          dwc3: usb@ff500000 {
+              compatible = "snps,dwc3";
+              reg = <0xff500000 0x100000>;
+              interrupts = <30>;
+              dr_mode = "host";
+              snps,dis_u2_susphy_quirk;
+              snps,quirk-frame-length-adjustment = <0x20>;
+          };
+    };
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
new file mode 100644
index 0000000000..e4d893369d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7411 Type-C controller
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7411
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml
+    unevaluatedProperties: false
+
+    description:
+      Properties for usb c connector.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      data-role: true
+
+      try-power-role: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec@2c {
+            compatible = "analogix,anx7411";
+            reg = <0x2c>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                try-power-role = "source";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml b/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
new file mode 100644
index 0000000000..c3b6be3d80
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Facebook Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,ast2600-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED USB 2.0 Device Controller
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |+
+  The ASPEED USB 2.0 Device Controller implements 1 control endpoint and
+  4 generic endpoints for AST260x.
+
+  Supports independent DMA channel for each generic endpoint.
+  Supports 32/256 stages descriptor mode for all generic endpoints.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-udc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    udc: usb@1e6a2000 {
+        compatible = "aspeed,ast2600-udc";
+        reg = <0x1e6a2000 0x300>;
+        interrupts = <9>;
+        clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usb2bd_default>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
new file mode 100644
index 0000000000..a86bcd9510
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Facebook Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED USB 2.0 Virtual Hub Controller
+
+maintainers:
+  - Benjamin Herrenschmidt <benh@kernel.crashing.org>
+
+description: |+
+  The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub
+  register and several sets of Device and Endpoint registers to support
+  the Virtual Hub's downstream USB devices.
+
+  Supported number of devices and endpoints vary depending on hardware
+  revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices
+  and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream
+  devices and 21 generic endpoints.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-usb-vhub
+      - aspeed,ast2500-usb-vhub
+      - aspeed,ast2600-usb-vhub
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  aspeed,vhub-downstream-ports:
+    description: Number of downstream ports supported by the Virtual Hub
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 5
+    minimum: 1
+    maximum: 7
+
+  aspeed,vhub-generic-endpoints:
+    description: Number of generic endpoints supported by the Virtual Hub
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 15
+    minimum: 1
+    maximum: 21
+
+  vhub-vendor-id:
+    description: vhub Vendor ID
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535
+
+  vhub-product-id:
+    description: vhub Product ID
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535
+
+  vhub-device-revision:
+    description: vhub Device Revision in binary-coded decimal
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 65535
+
+  vhub-strings:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^string@[0-9a-f]+$':
+        type: object
+        additionalProperties: false
+        description: string descriptors of the specific language
+
+        properties:
+          reg:
+            maxItems: 1
+            description: 16-bit Language Identifier defined by USB-IF
+
+          manufacturer:
+            description: vhub manufacturer
+            $ref: /schemas/types.yaml#/definitions/string
+
+          product:
+            description: vhub product name
+            $ref: /schemas/types.yaml#/definitions/string
+
+          serial-number:
+            description: vhub device serial number
+            $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,vhub-downstream-ports
+  - aspeed,vhub-generic-endpoints
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    vhub: usb-vhub@1e6a0000 {
+            compatible = "aspeed,ast2500-usb-vhub";
+            reg = <0x1e6a0000 0x300>;
+            interrupts = <5>;
+            clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+            aspeed,vhub-downstream-ports = <5>;
+            aspeed,vhub-generic-endpoints = <15>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_usb2ad_default>;
+
+            vhub-vendor-id = <0x1d6b>;
+            vhub-product-id = <0x0107>;
+            vhub-device-revision = <0x0100>;
+            vhub-strings {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                string@409 {
+                        reg = <0x409>;
+                        manufacturer = "ASPEED";
+                        product = "USB Virtual Hub";
+                        serial-number = "0000";
+                };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
new file mode 100644
index 0000000000..12183ef47e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -0,0 +1,125 @@
+Atmel SOC USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
+   used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ohci interrupt
+ - clocks: Should reference the peripheral, host and system clocks
+ - clock-names: Should contain three strings
+		"ohci_clk" for the peripheral clock
+		"hclk" for the host clock
+		"uhpck" for the system clock
+ - num-ports: Number of ports.
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+   activated for the bus to be powered.
+ - atmel,oc-gpio: If present, specifies a gpio that needs to be
+   activated for the overcurrent detection.
+
+usb0: ohci@500000 {
+	compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+	reg = <0x00500000 0x100000>;
+	clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+	clock-names = "ohci_clk", "hclk", "uhpck";
+	interrupts = <20 4>;
+	num-ports = <2>;
+};
+
+EHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
+   used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ehci interrupt
+ - clocks: Should reference the peripheral and the UTMI clocks
+ - clock-names: Should contain two strings
+		"ehci_clk" for the peripheral clock
+		"usb_clk" for the UTMI clock
+
+Optional properties:
+ - phy_type : For multi port host USB controllers, should be one of
+   "utmi", or "hsic".
+
+usb1: ehci@800000 {
+	compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+	reg = <0x00800000 0x100000>;
+	interrupts = <22 4>;
+	clocks = <&utmi>, <&uhphs_clk>;
+	clock-names = "usb_clk", "ehci_clk";
+};
+
+AT91 USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+	       "atmel,at91rm9200-udc"
+	       "atmel,at91sam9260-udc"
+	       "atmel,at91sam9261-udc"
+	       "atmel,at91sam9263-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain macb interrupt
+ - clocks: Should reference the peripheral and the AHB clocks
+ - clock-names: Should contain two strings
+		"pclk" for the peripheral clock
+		"hclk" for the AHB clock
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+   activated for the bus to be powered.
+
+usb1: gadget@fffa4000 {
+	compatible = "atmel,at91rm9200-udc";
+	reg = <0xfffa4000 0x4000>;
+	interrupts = <10 4>;
+	clocks = <&udc_clk>, <&udpck>;
+	clock-names = "pclk", "hclk";
+	atmel,vbus-gpio = <&pioC 5 0>;
+};
+
+Atmel High-Speed USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+	       "atmel,at91sam9rl-udc"
+	       "atmel,at91sam9g45-udc"
+	       "atmel,sama5d3-udc"
+	       "microchip,sam9x60-udc"
+	       "microchip,lan9662-udc"
+	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
+	       is required.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain usba interrupt
+ - clocks: Should reference the peripheral and host clocks
+ - clock-names: Should contain two strings
+		"pclk" for the peripheral clock
+		"hclk" for the host clock
+
+Deprecated property:
+ - ep childnode: To specify the number of endpoints and their properties.
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
+   vbus is present (USB is connected).
+
+Deprecated child node properties:
+ - name: Name of the endpoint.
+ - reg: Num of the endpoint.
+ - atmel,fifo-size: Size of the fifo.
+ - atmel,nb-banks: Number of banks.
+ - atmel,can-dma: Boolean to specify if the endpoint support DMA.
+ - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
+
+usb2: gadget@fff78000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "atmel,at91sam9rl-udc";
+	reg = <0x00600000 0x80000
+	       0xfff78000 0x400>;
+	interrupts = <27 4 0>;
+	clocks = <&utmi>, <&udphs_clk>;
+	clock-names = "hclk", "pclk";
+	atmel,vbus-gpio = <&pioB 19 0>;
+};
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
new file mode 100644
index 0000000000..1536cbec63
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB USB EHCI Controller
+
+allOf:
+  - $ref: usb-hcd.yaml
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm7445-ehci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Clock specifier for the EHCI clock
+
+  clock-names:
+    const: sw_usb
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usbphy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phys
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@f0b00300 {
+        compatible = "brcm,bcm7445-ehci";
+        reg = <0xf0b00300 0xa8>;
+        interrupts = <0x0 0x5a 0x0>;
+        phys = <&usbphy_0 0x0>;
+        phy-names = "usbphy";
+        clocks = <&usb20>;
+        clock-names = "sw_usb";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
new file mode 100644
index 0000000000..9e561fee98
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB Device Controller (BDC)
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bdc-udc-v2
+          - brcm,bdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: USB 2.0 or 3.0 PHY
+      - description: USB 3.0 PHY if there is a dedicated 2.0 PHY
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        usb@f0b02000 {
+                compatible = "brcm,bdc-udc-v2";
+                reg = <0xf0b02000 0xfc4>;
+                interrupts = <0x0 0x60 0x0>;
+                phys = <&usbphy_0 0x0>;
+                clocks = <&sw_usbd>;
+        };
diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
new file mode 100644
index 0000000000..5cc81ced58
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB pin map Controller
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: brcm,usb-pinmap
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt for signals mirrored to out-gpios.
+
+  in-gpios:
+    minItems: 1
+    maxItems: 2
+    description: Array of one or two GPIO pins used for input signals.
+
+  brcm,in-functions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Array of input signal names, one per gpio in in-gpios.
+
+  brcm,in-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of enable and mask pairs, one per gpio in-gpios.
+
+  out-gpios:
+    maxItems: 1
+    description: Array of one GPIO pin used for output signals.
+
+  brcm,out-functions:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Array of output signal names, one per gpio in out-gpios.
+
+  brcm,out-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of enable, value, changed and clear masks, one
+      per gpio in out-gpios.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+dependencies:
+  in-gpios: [ interrupts ]
+
+examples:
+  - |
+    usb_pinmap: usb-pinmap@22000d0 {
+        compatible = "brcm,usb-pinmap";
+        reg = <0x22000d0 0x4>;
+        in-gpios = <&gpio 18 0>, <&gpio 19 0>;
+        brcm,in-functions = "VBUS", "PWRFLT";
+        brcm,in-masks = <0x8000 0x40000 0x10000 0x80000>;
+        out-gpios = <&gpio 20 0>;
+        brcm,out-functions = "PWRON";
+        brcm,out-masks = <0x20000 0x800000 0x400000 0x200000>;
+        interrupts = <0x0 0xb2 0x4>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
new file mode 100644
index 0000000000..69a93a0722
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence USBSS-DRD controller
+
+maintainers:
+  - Pawel Laszczak <pawell@cadence.com>
+
+properties:
+  compatible:
+    const: cdns,usb3
+
+  reg:
+    items:
+      - description: OTG controller registers
+      - description: XHCI Host controller registers
+      - description: DEVICE controller registers
+
+  reg-names:
+    items:
+      - const: otg
+      - const: xhci
+      - const: dev
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: XHCI host controller interrupt
+      - description: Device controller interrupt
+      - description: OTG/DRD controller interrupt
+      - description: interrupt used to wake up core, e.g when usbcmd.rs is
+                     cleared by xhci core, this interrupt is optional
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: host
+      - const: peripheral
+      - const: otg
+      - const: wakeup
+
+  dr_mode:
+    enum: [host, otg, peripheral]
+
+  maximum-speed:
+    enum: [super-speed, high-speed, full-speed]
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      anyOf:
+        - const: cdns3,usb2-phy
+        - const: cdns3,usb3-phy
+
+  cdns,on-chip-buff-size:
+    description:
+      size of memory intended as internal memory for endpoints
+      buffers expressed in KB
+    $ref: /schemas/types.yaml#/definitions/uint16
+
+  cdns,phyrst-a-enable:
+    description: Enable resetting of PHY if Rx fail is detected
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@6000000 {
+            compatible = "cdns,usb3";
+            reg = <0x00 0x6000000 0x00 0x10000>,
+                  <0x00 0x6010000 0x00 0x10000>,
+                  <0x00 0x6020000 0x00 0x10000>;
+            reg-names = "otg", "xhci", "dev";
+            interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host", "peripheral", "otg";
+            maximum-speed = "super-speed";
+            dr_mode = "otg";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
new file mode 100644
index 0000000000..1394557517
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
@@ -0,0 +1,463 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB2 ChipIdea USB controller
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - chipidea,usb2
+          - lsi,zevio-usb
+          - nvidia,tegra20-ehci
+          - nvidia,tegra20-udc
+          - nvidia,tegra30-ehci
+          - nvidia,tegra30-udc
+          - nvidia,tegra114-udc
+          - nvidia,tegra124-udc
+          - qcom,ci-hdrc
+      - items:
+          - enum:
+              - nvidia,tegra114-ehci
+              - nvidia,tegra124-ehci
+              - nvidia,tegra210-ehci
+          - const: nvidia,tegra30-ehci
+      - items:
+          - enum:
+              - fsl,imx23-usb
+              - fsl,imx25-usb
+              - fsl,imx28-usb
+              - fsl,imx35-usb
+              - fsl,imx50-usb
+              - fsl,imx51-usb
+              - fsl,imx53-usb
+              - fsl,imx6q-usb
+              - fsl,imx6sl-usb
+              - fsl,imx6sx-usb
+              - fsl,imx6ul-usb
+              - fsl,imx7d-usb
+              - fsl,vf610-usb
+          - const: fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx8dxl-usb
+              - fsl,imx8ulp-usb
+          - const: fsl,imx7ulp-usb
+          - const: fsl,imx6ul-usb
+      - items:
+          - enum:
+              - fsl,imx8mm-usb
+              - fsl,imx8mn-usb
+          - const: fsl,imx7d-usb
+          - const: fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx6sll-usb
+              - fsl,imx7ulp-usb
+          - const: fsl,imx6ul-usb
+          - const: fsl,imx27-usb
+      - items:
+          - const: xlnx,zynq-usb-2.20a
+          - const: chipidea,usb2
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  dr_mode: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  phy_type: true
+
+  itc-setting:
+    description:
+      interrupt threshold control register control, the setting should be
+      aligned with ITC bits at register USBCMD.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ahb-burst-config:
+    description:
+      it is vendor dependent, the required value should be aligned with
+      AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
+      used to change AHB burst configuration, check the chipidea spec for
+      meaning of each value. If this property is not existed, it will use
+      the reset value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+  tx-burst-size-dword:
+    description:
+      it is vendor dependent, the tx burst size in dword (4 bytes), This
+      register represents the maximum length of a the burst in 32-bit
+      words while moving data from system memory to the USB bus, the value
+      of this property will only take effect if property "ahb-burst-config"
+      is set to 0, if this property is missing the reset default of the
+      hardware implementation will be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x20
+
+  rx-burst-size-dword:
+    description:
+      it is vendor dependent, the rx burst size in dword (4 bytes), This
+      register represents the maximum length of a the burst in 32-bit words
+      while moving data from the USB bus to system memory, the value of
+      this property will only take effect if property "ahb-burst-config"
+      is set to 0, if this property is missing the reset default of the
+      hardware implementation will be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x20
+
+  extcon:
+    description:
+      Phandles to external connector devices. First phandle should point
+      to external connector, which provide "USB" cable events, the second
+      should point to external connector device, which provide "USB-HOST"
+      cable events. If one of the external connector devices is not
+      required, empty <0> phandle should be specified.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    items:
+      - description: vbus extcon
+      - description: id extcon
+
+  phy-clkgate-delay-us:
+    description:
+      The delay time (us) between putting the PHY into low power mode and
+      gating the PHY clock.
+
+  non-zero-ttctrl-ttha:
+    description:
+      After setting this property, the value of register ttctrl.ttha
+      will be 0x7f; if not, the value will be 0x0, this is the default
+      value. It needs to be very carefully for setting this property, it
+      is recommended that consult with your IC engineer before setting
+      this value.  On the most of chipidea platforms, the "usage_tt" flag
+      at RTL is 0, so this property only affects siTD.
+
+      If this property is not set, the max packet size is 1023 bytes, and
+      if the total of packet size for previous transactions are more than
+      256 bytes, it can't accept any transactions within this frame. The
+      use case is single transaction, but higher frame rate.
+
+      If this property is set, the max packet size is 188 bytes, it can
+      handle more transactions than above case, it can accept transactions
+      until it considers the left room size within frame is less than 188
+      bytes, software needs to make sure it does not send more than 90%
+      maximum_periodic_data_per_frame. The use case is multiple
+      transactions, but less frame rate.
+    type: boolean
+
+  mux-controls:
+    description:
+      The mux control for toggling host/device output of this controller.
+      It's expected that a mux state of 0 indicates device mode and a mux
+      state of 1 indicates host mode.
+    maxItems: 1
+
+  mux-control-names:
+    const: usb_switch
+
+  operating-points-v2:
+    description: A phandle to the OPP table containing the performance states.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  pinctrl-names:
+    description:
+      Names for optional pin modes in "default", "host", "device".
+      In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
+      In this case, the "idle" state needs to pull down the data and
+      strobe pin and the "active" state needs to pull up the strobe pin.
+    oneOf:
+      - items:
+          - const: idle
+          - const: active
+      - items:
+          - const: default
+          - enum:
+              - host
+              - device
+      - items:
+          - const: default
+
+  pinctrl-0:
+    maxItems: 1
+
+  pinctrl-1:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb-phy
+
+  phy-select:
+    description:
+      Phandler of TCSR node with two argument that indicate register
+      offset, and phy index
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: phandle to TCSR node
+      - description: register offset
+      - description: phy index
+
+  vbus-supply:
+    description: reference to the VBUS regulator.
+
+  fsl,usbmisc:
+    description:
+      Phandler of non-core register device, with one argument that
+      indicate usb controller index
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to usbmisc node
+          - description: index of usb controller
+
+  fsl,anatop:
+    description: phandle for the anatop node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  disable-over-current:
+    type: boolean
+    description: disable over current detect
+
+  over-current-active-low:
+    type: boolean
+    description: over current signal polarity is active low
+
+  over-current-active-high:
+    type: boolean
+    description:
+      Over current signal polarity is active high. It's recommended to
+      specify the over current polarity.
+
+  power-active-high:
+    type: boolean
+    description: power signal polarity is active high
+
+  external-vbus-divider:
+    type: boolean
+    description: enables off-chip resistor divider for Vbus
+
+  samsung,picophy-pre-emp-curr-control:
+    description:
+      HS Transmitter Pre-Emphasis Current Control. This signal controls
+      the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
+      pins after a J-to-K or K-to-J transition. The range is from 0x0 to
+      0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
+      bits of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x3
+
+  samsung,picophy-dc-vol-level-adjust:
+    description:
+      HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
+      level voltage. The range is from 0x0 to 0xf, the default value is
+      0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+
+  fsl,picophy-rise-fall-time-adjust:
+    description:
+      HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
+      of the high-speed transmitter waveform. It has no unit. The rise/fall
+      time will be increased or decreased by a certain percentage relative
+      to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
+      Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
+  usb-phy:
+    description: phandle for the PHY device. Use "phys" instead.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  fsl,usbphy:
+    description: phandle of usb phy that connects to the port. Use "phys" instead.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  nvidia,phy:
+    description: phandle of usb phy that connects to the port. Use "phys" instead.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  nvidia,needs-double-reset:
+    description: Indicates double reset or not.
+    type: boolean
+    deprecated: true
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  reset-gpios:
+    maxItems: 1
+
+  ulpi:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^phy(-[0-9])?$":
+        description: The phy child node for Qcom chips.
+        type: object
+        $ref: /schemas/phy/qcom,usb-hs-phy.yaml
+
+dependencies:
+  port: [ usb-role-switch ]
+  mux-controls: [ mux-control-names ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: usb-hcd.yaml#
+  - $ref: usb-drd.yaml#
+  - if:
+      properties:
+        phy_type:
+          const: hsic
+      required:
+        - phy_type
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: idle
+            - const: active
+    else:
+      properties:
+        pinctrl-names:
+          minItems: 1
+          maxItems: 2
+          oneOf:
+            - items:
+                - const: default
+                - enum:
+                    - host
+                    - device
+            - items:
+                - const: default
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - chipidea,usb2
+              - lsi,zevio-usb
+              - nvidia,tegra20-udc
+              - nvidia,tegra30-udc
+              - nvidia,tegra114-udc
+              - nvidia,tegra124-udc
+              - qcom,ci-hdrc
+              - xlnx,zynq-usb-2.20a
+    then:
+      properties:
+        fsl,usbmisc: false
+        disable-over-current: false
+        over-current-active-low: false
+        over-current-active-high: false
+        power-active-high: false
+        external-vbus-divider: false
+        samsung,picophy-pre-emp-curr-control: false
+        samsung,picophy-dc-vol-level-adjust: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/berlin2.h>
+
+    usb@f7ed0000 {
+        compatible = "chipidea,usb2";
+        reg = <0xf7ed0000 0x10000>;
+        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&chip CLKID_USB0>;
+        phys = <&usb_phy0>;
+        phy-names = "usb-phy";
+        vbus-supply = <&reg_usb0_vbus>;
+        itc-setting = <0x4>; /* 4 micro-frames */
+         /* Incremental burst of unspecified length */
+        ahb-burst-config = <0x0>;
+        tx-burst-size-dword = <0x10>; /* 64 bytes */
+        rx-burst-size-dword = <0x10>;
+        extcon = <0>, <&usb_id>;
+        phy-clkgate-delay-us = <400>;
+        mux-controls = <&usb_switch>;
+        mux-control-names = "usb_switch";
+    };
+
+  # Example for HSIC:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usb@2184400 {
+        compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+        reg = <0x02184400 0x200>;
+        interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_USBOH3>;
+        fsl,usbphy = <&usbphynop1>;
+        fsl,usbmisc = <&usbmisc 2>;
+        phy_type = "hsic";
+        dr_mode = "host";
+        ahb-burst-config = <0x0>;
+        tx-burst-size-dword = <0x10>;
+        rx-burst-size-dword = <0x10>;
+        pinctrl-names = "idle", "active";
+        pinctrl-0 = <&pinctrl_usbh2_idle>;
+        pinctrl-1 = <&pinctrl_usbh2_active>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9730";
+            reg = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
new file mode 100644
index 0000000000..89fc9a434d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress cypd4226 Type-C Controller
+
+maintainers:
+  - Wayne Chang <waynec@nvidia.com>
+
+description:
+  The Cypress cypd4226 is a dual Type-C controller that is controlled
+  via an I2C interface.
+
+properties:
+  compatible:
+    const: cypress,cypd4226
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  reg:
+    const: 0x08
+
+  interrupts:
+    items:
+      - description: cypd4226 host interrupt
+
+  firmware-name:
+    enum:
+      - nvidia,gpu
+      - nvidia,jetson-agx-xavier
+    description: |
+      The name of the CCGx firmware built for product series.
+      should be set one of following:
+      - "nvidia,gpu" for the NVIDIA RTX product series
+      - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series
+
+patternProperties:
+  '^connector@[01]$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+anyOf:
+  - required:
+      - connector@0
+  - required:
+      - connector@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #interrupt-cells = <2>;
+
+      typec@8 {
+        compatible = "cypress,cypd4226";
+        reg = <0x08>;
+        interrupt-parent = <&gpio_aon>;
+        interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>;
+        firmware-name = "nvidia,jetson-agx-xavier";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        connector@0 {
+          compatible = "usb-c-connector";
+          reg = <0>;
+          label = "USB-C";
+          data-role = "dual";
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_role_switch0>;
+              };
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/cypress,hx3.yaml b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
new file mode 100644
index 0000000000..47add0d85f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cypress,hx3.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cypress,hx3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress HX3 USB 3.0 hub controller family
+
+maintainers:
+  - Benjamin Bara <benjamin.bara@skidata.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb4b4,6504
+      - usb4b4,6506
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for RESETN pin.
+
+  vdd-supply:
+    description:
+      1V2 power supply (VDD_EFUSE, AVDD12, DVDD12).
+
+  vdd2-supply:
+    description:
+      3V3 power supply (AVDD33, VDD_IO).
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+  - vdd-supply
+  - vdd2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb4b4,6504";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+          vdd-supply = <&reg_1v2_usb>;
+          vdd2-supply = <&reg_3v3_usb>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb4b4,6506";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+          vdd-supply = <&reg_1v2_usb>;
+          vdd2-supply = <&reg_3v3_usb>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000000..fb2027a7d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -0,0 +1,81 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
+
+ - phys: Phandle for the PHY device
+
+ - phy-names: Should be "usb-phy"
+
+ - dmas: specifies the dma channels
+
+ - dma-names: specifies the names of the channels. Use "rxN" for receive
+   and "txN" for transmit endpoints. N specifies the endpoint number.
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - vbus-supply: Phandle to a regulator providing the USB bus power.
+
+DMA
+~~~
+- compatible: ti,da830-cppi41
+- reg: offset and length of the following register spaces: CPPI DMA Controller,
+  CPPI DMA Scheduler, Queue Manager
+- reg-names: "controller", "scheduler", "queuemgr"
+- #dma-cells: should be set to 2. The first number represents the
+  channel number (0 … 3 for endpoints 1 … 4).
+  The second number is 0 for RX and 1 for TX transfers.
+- dma-channels: should be set to 4 representing the 4 endpoints.
+- #dma-channels: deprecated
+
+Example:
+	usb_phy: usb-phy {
+		compatible = "ti,da830-usb-phy";
+		#phy-cells = <0>;
+	};
+	usb0: usb@200000 {
+		compatible = "ti,da830-musb";
+		reg = <0x00200000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <58>;
+		interrupt-names = "mc";
+
+		dr_mode = "host";
+		vbus-supply = <&usb_vbus>;
+		phys = <&usb_phy 0>;
+		phy-names = "usb-phy";
+
+		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+			&cppi41dma 2 0 &cppi41dma 3 0
+			&cppi41dma 0 1 &cppi41dma 1 1
+			&cppi41dma 2 1 &cppi41dma 3 1>;
+		dma-names =
+			"rx1", "rx2", "rx3", "rx4",
+			"tx1", "tx2", "tx3", "tx4";
+
+
+		cppi41dma: dma-controller@201000 {
+			compatible = "ti,da830-cppi41";
+			reg =  <0x201000 0x1000
+				0x202000 0x1000
+				0x204000 0x4000>;
+			reg-names = "controller", "scheduler", "queuemgr";
+			interrupts = <58>;
+			#dma-cells = <2>;
+			dma-channels = <4>;
+		};
+
+	};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
new file mode 100644
index 0000000000..0a5c98ea71
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare HS OTG USB 2.0 controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm2835-usb
+      - const: hisilicon,hi6220-usb
+      - const: ingenic,jz4775-otg
+      - const: ingenic,jz4780-otg
+      - const: ingenic,x1000-otg
+      - const: ingenic,x1600-otg
+      - const: ingenic,x1700-otg
+      - const: ingenic,x1830-otg
+      - const: ingenic,x2000-otg
+      - items:
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - enum:
+              - rockchip,px30-usb
+              - rockchip,rk3036-usb
+              - rockchip,rk3128-usb
+              - rockchip,rk3188-usb
+              - rockchip,rk3228-usb
+              - rockchip,rk3288-usb
+              - rockchip,rk3308-usb
+              - rockchip,rk3328-usb
+              - rockchip,rk3368-usb
+              - rockchip,rv1108-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - const: lantiq,arx100-usb
+      - const: lantiq,ase-usb
+      - const: lantiq,danube-usb
+      - const: lantiq,xrx200-usb
+      - const: lantiq,xrx300-usb
+      - items:
+          - enum:
+              - amlogic,meson8-usb
+              - amlogic,meson8b-usb
+              - amlogic,meson-gxbb-usb
+              - amlogic,meson-g12a-usb
+              - amlogic,meson-a1-usb
+              - intel,socfpga-agilex-hsotg
+          - const: snps,dwc2
+      - const: amcc,dwc-otg
+      - const: apm,apm82181-dwc-otg
+      - const: snps,dwc2
+      - const: st,stm32f4x9-fsotg
+      - const: st,stm32f4x9-hsotg
+      - const: st,stm32f7-hsotg
+      - const: st,stm32mp15-fsotg
+      - items:
+          - const: st,stm32mp15-hsotg
+          - const: snps,dwc2
+      - const: samsung,s3c6400-hsotg
+      - const: intel,socfpga-agilex-hsotg
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: otg
+      - const: utmi
+    minItems: 1
+
+  disable-over-current:
+    type: boolean
+    description: whether to disable detection of over-current condition.
+
+  iommus:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: common reset
+      - description: ecc reset
+    minItems: 1
+
+  reset-names:
+    items:
+      - const: dwc2
+      - const: dwc2-ecc
+    minItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb2-phy
+
+  power-domains:
+    maxItems: 1
+
+  vbus-supply:
+    description: reference to the VBUS regulator. Depending on the current mode
+      this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
+      regulator is updated if the controller is configured in "otg" mode and the
+      status changes between "host" and "peripheral".
+
+  vusb_d-supply:
+    description: phandle to voltage regulator of digital section,
+
+  vusb_a-supply:
+    description: phandle to voltage regulator of analog section.
+
+  usb33d-supply:
+    description: reference to the VBUS and ID sensing comparators supply, in
+      order to perform OTG operation, used on STM32MP15 SoCs.
+
+  dr_mode: true
+
+  otg-rev: true
+
+  hnp-disable: true
+
+  srp-disable: true
+
+  usb-role-switch: true
+
+  role-switch-default-mode: true
+
+  g-rx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size of rx fifo size in gadget mode.
+
+  g-np-tx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size of non-periodic tx fifo size in gadget mode.
+
+  g-tx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+  snps,need-phy-for-wake:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If present indicates that the phy needs to be left on for
+      remote wakeup during suspend.
+
+  snps,reset-phy-on-wake:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If present indicates that we need to reset the PHY when we
+      detect a wakeup. This is due to a hardware errata.
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  tpl-support: true
+
+dependencies:
+  port: [ usb-role-switch ]
+  role-switch-default-mode: [ usb-role-switch ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+      usb@101c0000 {
+        compatible = "rockchip,rk3066-usb", "snps,dwc2";
+        reg = <0x10180000 0x40000>;
+        interrupts = <18>;
+        clocks = <&usb_otg_ahb_clk>;
+        clock-names = "otg";
+        phys = <&usbphy>;
+        phy-names = "usb2-phy";
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
new file mode 100644
index 0000000000..171df79360
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
@@ -0,0 +1,28 @@
+Cavium SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	Should contain "cavium,octeon-7130-usb-uctl"
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Example device node:
+
+		    uctl@1180069000000 {
+			    compatible = "cavium,octeon-7130-usb-uctl";
+			    reg = <0x00011800 0x69000000 0x00000000 0x00000100>;
+			    ranges;
+			    #address-cells = <0x00000002>;
+			    #size-cells = <0x00000002>;
+			    refclk-frequency = <0x05f5e100>;
+			    refclk-type-ss = "dlmc_ref_clk0";
+			    refclk-type-hs = "dlmc_ref_clk0";
+			    power = <0x00000002 0x00000002 0x00000001>;
+			    xhci@1690000000000 {
+				    compatible = "cavium,octeon-7130-xhci", "snps,dwc3";
+				    reg = <0x00016900 0x00000000 0x00000010 0x00000000>;
+				    interrupt-parent = <0x00000010>;
+				    interrupts = <0x00000009 0x00000004>;
+			    };
+		    };
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
new file mode 100644
index 0000000000..4aa368447b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -0,0 +1,66 @@
+ST DWC3 glue logic
+
+This file documents the parameters for the dwc3-st driver.
+This driver controls the glue logic used to configure the dwc3 core on
+STiH407 based platforms.
+
+Required properties:
+ - compatible	: must be "st,stih407-dwc3"
+ - reg		: glue logic base address and USB syscfg ctrl register offset
+ - reg-names	: should be "reg-glue" and "syscfg-reg"
+ - st,syscon	: should be phandle to system configuration node which
+		  encompasses the glue registers
+ - resets	: list of phandle and reset specifier pairs. There should be two entries, one
+		  for the powerdown and softreset lines of the usb3 IP
+ - reset-names	: list of reset signal names. Names should be "powerdown" and "softreset"
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+   with 'reg' property
+
+ - pinctl-names	: A pinctrl state named "default" must be defined
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+ - pinctrl-0	: Pin control group
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+ - ranges	: allows valid 1:1 translation between child's address space and
+		  parent's address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+
+NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value
+is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
+or "device".
+
+[1] Documentation/devicetree/bindings/usb/usb-drd.yaml
+
+Example:
+
+st_dwc3: dwc3@8f94000 {
+	compatible	= "st,stih407-dwc3";
+	reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+	reg-names	= "reg-glue", "syscfg-reg";
+	st,syscfg	= <&syscfg_core>;
+	resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+			  <&softreset STIH407_MIPHY2_SOFTRESET>;
+	reset-names	= "powerdown", "softreset";
+	#address-cells	= <1>;
+	#size-cells	= <1>;
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_usb3>;
+	ranges;
+
+	dwc3: dwc3@9900000 {
+		compatible	= "snps,dwc3";
+		reg		= <0x09900000 0x100000>;
+		interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
+		dr_mode		= "host";
+		phy-names	= "usb2-phy", "usb3-phy";
+		phys		= <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
new file mode 100644
index 0000000000..bb373eb025
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-dwc3
+          - xlnx,versal-dwc3
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  power-domains:
+    description: specifies a phandle to PM domain provider node
+    maxItems: 1
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: Master/Core clock, has to be >= 125 MHz
+          for SS operation and >= 60MHz for HS operation.
+      - description: Clock source to core during PHY power down.
+
+  clock-names:
+    items:
+      - const: bus_clk
+      - const: ref_clk
+
+  resets:
+    description:
+      A list of phandles for resets listed in reset-names.
+
+    items:
+      - description: USB core reset
+      - description: USB hibernation reset
+      - description: USB APB reset
+
+  reset-names:
+    items:
+      - const: usb_crst
+      - const: usb_hibrst
+      - const: usb_apbrst
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - usb2-phy
+        - usb3-phy
+
+  reset-gpios:
+    description: GPIO used for the reset ulpi-phy
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - power-domains
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x2>;
+            compatible = "xlnx,zynqmp-dwc3";
+            reg = <0x0 0xff9d0000 0x0 0x100>;
+            clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+            clock-names = "bus_clk", "ref_clk";
+            power-domains = <&zynqmp_firmware PD_USB_0>;
+            resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+            reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+            phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+            phy-names = "usb3-phy";
+            ranges;
+
+            usb@fe200000 {
+                compatible = "snps,dwc3";
+                reg = <0x0 0xfe200000 0x0 0x40000>;
+                interrupt-names = "host", "otg";
+                interrupts = <0 65 4>, <0 69 4>;
+                dr_mode = "host";
+                dma-coherent;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt
new file mode 100644
index 0000000000..d6f2bdee20
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -0,0 +1,38 @@
+ST USB EHCI controller
+
+Required properties:
+ - compatible		: must be "st,st-ehci-300x"
+ - reg			: physical base addresses of the controller and length of memory mapped
+			  region
+ - interrupts		: one EHCI interrupt should be described here
+ - pinctrl-names	: a pinctrl state named "default" must be defined
+ - pinctrl-0		: phandle referencing pin configuration of the USB controller
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+ - clocks		: phandle list of usb clocks
+ - clock-names		: should be "ic" for interconnect clock and "clk48"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ - phys			: phandle for the PHY device
+ - phy-names		: should be "usb"
+ - resets		: phandle + reset specifier pairs to the powerdown and softreset lines
+			  of the USB IP
+ - reset-names		: should be "power" and "softreset"
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+	ehci1: usb@fe203e00 {
+		compatible = "st,st-ehci-300x";
+		reg = <0xfe203e00 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&clk_s_a1_ls 0>;
+		phys = <&usb2_phy>;
+		phy-names = "usb";
+
+		resets = <&powerdown STIH416_USB1_POWERDOWN>,
+			 <&softreset STIH416_USB1_SOFTRESET>;
+		reset-names = "power", "softreset";
+	};
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
new file mode 100644
index 0000000000..3fe4d1564d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FOTG200 series HS OTG USB 2.0 controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,fotg200
+      - const: faraday,fotg210
+      - items:
+          - const: cortina,gemini-usb
+          - const: faraday,fotg200
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: PCLK
+
+  resets:
+    maxItems: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller on
+      Gemini systems
+
+  dr_mode: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb2-phy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    usb0: usb@68000000 {
+        compatible = "cortina,gemini-usb", "faraday,fotg200";
+        reg = <0x68000000 0x1000>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&syscon GEMINI_RESET_USB0>;
+        clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+        clock-names = "PCLK";
+        syscon = <&syscon>;
+        dr_mode = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
new file mode 100644
index 0000000000..f6e7a5c1ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fcs,fsa4480.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor Analog Audio Switch
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa4480
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: power supply (2.7V-5.5V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the FSA4480 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c13 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@42 {
+          compatible = "fcs,fsa4480";
+          reg = <0x42>;
+
+          interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+          vcc-supply = <&vreg_bob>;
+
+          mode-switch;
+          orientation-switch;
+
+          port {
+            fsa4480_ept: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.yaml b/Documentation/devicetree/bindings/usb/fcs,fusb302.yaml
new file mode 100644
index 0000000000..b396ea0ab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fcs,fusb302.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild FUSB302 Type-C Port controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: fcs,fusb302
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vbus-supply:
+    description: VBUS power supply
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vbus-supply
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      typec-portc@54 {
+        compatible = "fcs,fusb302";
+        reg = <0x54>;
+        interrupt-parent = <&nmi_intc>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+        vbus-supply = <&vbus_typec>;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+          sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+                       PDO_VAR(3000, 12000, 3000)
+                       PDO_PPS_APDO(3000, 11000, 3000)>;
+          op-sink-microwatt = <10000000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
new file mode 100644
index 0000000000..9ea1e4cd07
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8MP Soc USB Controller
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8mp-dwc3
+
+  reg:
+    items:
+      - description: Address and length of the register set for HSIO Block Control
+      - description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  dma-ranges:
+    description:
+      See section 2.3.9 of the DeviceTree Specification.
+
+  ranges: true
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt that is asserted when a wakeup event is
+      received.
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: system hsio root clock.
+      - description: suspend clock, used for usb wakeup logic.
+
+  clock-names:
+    items:
+      - const: hsio
+      - const: suspend
+
+  fsl,permanently-attached:
+    type: boolean
+    description:
+      Indicates if the device attached to a downstream port is
+      permanently attached.
+
+  fsl,disable-port-power-control:
+    type: boolean
+    description:
+      Indicates whether the host controller implementation includes port
+      power control. Defines Bit 3 in capability register (HCCPARAMS).
+
+  fsl,over-current-active-low:
+    type: boolean
+    description:
+      Over current signal polarity is active low.
+
+  fsl,power-active-low:
+    type: boolean
+    description:
+      Power pad (PWR) polarity is active low.
+
+  power-domains:
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - dma-ranges
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb3_0: usb@32f10100 {
+      compatible = "fsl,imx8mp-dwc3";
+      reg = <0x32f10100 0x8>,
+            <0x381f0000 0x20>;
+      clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+               <&clk IMX8MP_CLK_USB_ROOT>;
+      clock-names = "hsio", "suspend";
+      interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+      power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+      ranges;
+
+      usb@38100000 {
+        compatible = "snps,dwc3";
+        reg = <0x38100000 0x10000>;
+        clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+                 <&clk IMX8MP_CLK_USB_CORE_REF>,
+                 <&clk IMX8MP_CLK_USB_ROOT>;
+        clock-names = "bus_early", "ref", "suspend";
+        assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+        assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+        assigned-clock-rates = <500000000>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        phys = <&usb3_phy0>, <&usb3_phy0>;
+        phy-names = "usb2-phy", "usb3-phy";
+        snps,dis-u2-freeclk-exists-quirk;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mq-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mq-dwc3.yaml
new file mode 100644
index 0000000000..50569d3ee7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mq-dwc3.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8mq-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8MQ Soc USB Controller
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8mq-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mq-dwc3
+      - const: snps,dwc3
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb_dwc3_1: usb@38200000 {
+        compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+        reg = <0x38200000 0x10000>;
+        clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
+                 <&clk IMX8MQ_CLK_USB_CORE_REF>,
+                 <&clk IMX8MQ_CLK_32K>;
+        clock-names = "bus_early", "ref", "suspend";
+        interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+        phys = <&usb3_phy1>, <&usb3_phy1>;
+        phy-names = "usb2-phy", "usb3-phy";
+    };
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
new file mode 100644
index 0000000000..ceb76394af
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8qm-cdns3.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8qm-cdns3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8QM Soc USB Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qm-usb3
+
+  reg:
+    items:
+      - description: Register set for iMX USB3 Platform Control
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Standby clock. Used during ultra low power states.
+      - description: USB bus clock for usb3 controller.
+      - description: AXI clock for AXI interface.
+      - description: ipg clock for register access.
+      - description: Core clock for usb3 controller.
+
+  clock-names:
+    items:
+      - const: lpm
+      - const: bus
+      - const: aclk
+      - const: ipg
+      - const: core
+
+  power-domains:
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: cdns,usb3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@5b110000 {
+      compatible = "fsl,imx8qm-usb3";
+      reg = <0x5b110000 0x10000>;
+      ranges;
+      clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+               <&usb3_lpcg IMX_LPCG_CLK_0>,
+               <&usb3_lpcg IMX_LPCG_CLK_7>,
+               <&usb3_lpcg IMX_LPCG_CLK_4>,
+               <&usb3_lpcg IMX_LPCG_CLK_5>;
+      clock-names = "lpm", "bus", "aclk", "ipg", "core";
+      assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+      assigned-clock-rates = <250000000>;
+      power-domains = <&pd IMX_SC_R_USB_2>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      usb@5b120000 {
+        compatible = "cdns,usb3";
+        reg = <0x5b120000 0x10000>,   /* memory area for OTG/DRD registers */
+              <0x5b130000 0x10000>,   /* memory area for HOST registers */
+              <0x5b140000 0x10000>;   /* memory area for DEVICE registers */
+        reg-names = "otg", "xhci", "dev";
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "host", "peripheral", "otg", "wakeup";
+        phys = <&usb3_phy>;
+        phy-names = "cdns3,usb3-phy";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
new file mode 100644
index 0000000000..2d3589d284
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,usbmisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX wrapper module for Chipidea USB2 controller
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx25-usbmisc
+          - fsl,imx27-usbmisc
+          - fsl,imx35-usbmisc
+          - fsl,imx51-usbmisc
+          - fsl,imx53-usbmisc
+          - fsl,imx6q-usbmisc
+          - fsl,vf610-usbmisc
+      - items:
+          - enum:
+              - fsl,imx6ul-usbmisc
+              - fsl,imx6sl-usbmisc
+              - fsl,imx6sx-usbmisc
+              - fsl,imx7d-usbmisc
+          - const: fsl,imx6q-usbmisc
+      - items:
+          - enum:
+              - fsl,imx7ulp-usbmisc
+              - fsl,imx8mm-usbmisc
+              - fsl,imx8mn-usbmisc
+          - const: fsl,imx7d-usbmisc
+          - const: fsl,imx6q-usbmisc
+      - items:
+          - const: fsl,imx6sll-usbmisc
+          - const: fsl,imx6ul-usbmisc
+          - const: fsl,imx6q-usbmisc
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  '#index-cells':
+    const: 1
+    description: Cells used to describe usb controller index.
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usbmisc@2184800 {
+        compatible = "fsl,imx6q-usbmisc";
+        reg = <0x02184800 0x200>;
+        #index-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/fsl-usb.txt b/Documentation/devicetree/bindings/usb/fsl-usb.txt
new file mode 100644
index 0000000000..0b08b006c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl-usb.txt
@@ -0,0 +1,81 @@
+Freescale SOC USB controllers
+
+The device node for a USB controller that is part of a Freescale
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : Should be "fsl-usb2-mph" for multi port host USB
+   controllers, or "fsl-usb2-dr" for dual role USB controllers
+   or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
+   Wherever applicable, the IP version of the USB controller should
+   also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
+ - phy_type : For multi port host USB controllers, should be one of
+   "ulpi", or "serial". For dual role USB controllers, should be
+   one of "ulpi", "utmi", "utmi_wide", or "serial".
+ - reg : Offset and length of the register set for the device
+ - port0 : boolean; if defined, indicates port0 is connected for
+   fsl-usb2-mph compatible controllers.  Either this property or
+   "port1" (or both) must be defined for "fsl-usb2-mph" compatible
+   controllers.
+ - port1 : boolean; if defined, indicates port1 is connected for
+   fsl-usb2-mph compatible controllers.  Either this property or
+   "port0" (or both) must be defined for "fsl-usb2-mph" compatible
+   controllers.
+ - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
+   controllers.  Can be "host", "peripheral", or "otg".  Default to
+   "host" if not defined for backward compatibility.
+
+Recommended properties :
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+
+Optional properties :
+ - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
+   port power polarity of internal PHY signal DRVVBUS is inverted.
+ - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
+   the PWR_FAULT signal polarity is inverted.
+
+Example multi port host USB controller device node :
+	usb@22000 {
+		compatible = "fsl-usb2-mph";
+		reg = <22000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <27 1>;
+		phy_type = "ulpi";
+		port0;
+		port1;
+	};
+
+Example dual role USB controller device node :
+	usb@23000 {
+		compatible = "fsl-usb2-dr";
+		reg = <23000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <26 1>;
+		dr_mode = "otg";
+		phy = "ulpi";
+	};
+
+Example dual role USB controller device node for MPC5121ADS:
+
+	usb@4000 {
+		compatible = "fsl,mpc5121-usb2-dr";
+		reg = <0x4000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = < &ipic >;
+		interrupts = <44 0x8>;
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		fsl,invert-drvvbus;
+		fsl,invert-pwr-fault;
+	};
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
new file mode 100644
index 0000000000..87986c45be
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB EHCI Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+allOf:
+  - $ref: usb-hcd.yaml
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: ibm,usb-ehci-440epx
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-ehci
+              - allwinner,sun50i-a64-ehci
+              - allwinner,sun50i-h6-ehci
+              - allwinner,sun50i-h616-ehci
+              - allwinner,sun5i-a13-ehci
+              - allwinner,sun6i-a31-ehci
+              - allwinner,sun7i-a20-ehci
+              - allwinner,sun8i-a23-ehci
+              - allwinner,sun8i-a83t-ehci
+              - allwinner,sun8i-h3-ehci
+              - allwinner,sun8i-r40-ehci
+              - allwinner,sun8i-v3s-ehci
+              - allwinner,sun9i-a80-ehci
+              - allwinner,sun20i-d1-ehci
+              - aspeed,ast2400-ehci
+              - aspeed,ast2500-ehci
+              - aspeed,ast2600-ehci
+              - brcm,bcm3384-ehci
+              - brcm,bcm63268-ehci
+              - brcm,bcm6328-ehci
+              - brcm,bcm6358-ehci
+              - brcm,bcm6362-ehci
+              - brcm,bcm6368-ehci
+              - brcm,bcm7125-ehci
+              - brcm,bcm7346-ehci
+              - brcm,bcm7358-ehci
+              - brcm,bcm7360-ehci
+              - brcm,bcm7362-ehci
+              - brcm,bcm7420-ehci
+              - brcm,bcm7425-ehci
+              - brcm,bcm7435-ehci
+              - hpe,gxp-ehci
+              - ibm,476gtr-ehci
+              - nxp,lpc1850-ehci
+              - qca,ar7100-ehci
+              - rockchip,rk3588-ehci
+              - snps,hsdk-v1.0-ehci
+              - socionext,uniphier-ehci
+          - const: generic-ehci
+      - items:
+          - enum:
+              - atmel,at91sam9g45-ehci
+              - cavium,octeon-6335-ehci
+              - ibm,usb-ehci-440epx
+              - ibm,usb-ehci-460ex
+              - nintendo,hollywood-usb-ehci
+              - st,spear600-ehci
+          - const: usb-ehci
+      - enum:
+          - generic-ehci
+          - marvell,armada-3700-ehci
+          - marvell,orion-ehci
+          - nuvoton,npcm750-ehci
+          - nuvoton,npcm845-ehci
+          - ti,ehci-omap
+          - usb-ehci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      In case the Renesas R-Car Gen3 SoCs:
+        - if a host only channel: first clock should be host.
+        - if a USB DRD channel: first clock should be host and second
+          one should be peripheral
+
+  power-domains:
+    maxItems: 1
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+  big-endian-desc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors.
+
+  big-endian-regs:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian registers.
+
+  has-transaction-translator:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag if EHCI has a Transaction Translator built into
+      the root hub.
+
+  needs-reset-on-resume:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag to force EHCI reset after resume.
+
+  spurious-oc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag to indicate that the hardware sometimes turns on
+      the OC bit when an over-current isn't actually present.
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  phy-names:
+    const: usb
+
+  iommus:
+    maxItems: 1
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    usb@e0000300 {
+        compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+        interrupt-parent = <&UIC0>;
+        interrupts = <0x1a 4>;
+        reg = <0xe0000300 90>, <0xe0000390 70>;
+        big-endian;
+    };
+
+  - |
+    ehci0: usb@1c14000 {
+        compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+        reg = <0x01c14000 0x100>;
+        interrupts = <39>;
+        clocks = <&ahb_gates 1>;
+        phys = <&usbphy 1>;
+        phy-names = "usb";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
new file mode 100644
index 0000000000..b957601573
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB OHCI Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun4i-a10-ohci
+              - allwinner,sun50i-a64-ohci
+              - allwinner,sun50i-h6-ohci
+              - allwinner,sun50i-h616-ohci
+              - allwinner,sun5i-a13-ohci
+              - allwinner,sun6i-a31-ohci
+              - allwinner,sun7i-a20-ohci
+              - allwinner,sun8i-a23-ohci
+              - allwinner,sun8i-a83t-ohci
+              - allwinner,sun8i-h3-ohci
+              - allwinner,sun8i-r40-ohci
+              - allwinner,sun8i-v3s-ohci
+              - allwinner,sun9i-a80-ohci
+              - allwinner,sun20i-d1-ohci
+              - brcm,bcm3384-ohci
+              - brcm,bcm63268-ohci
+              - brcm,bcm6328-ohci
+              - brcm,bcm6358-ohci
+              - brcm,bcm6362-ohci
+              - brcm,bcm6368-ohci
+              - brcm,bcm7125-ohci
+              - brcm,bcm7346-ohci
+              - brcm,bcm7358-ohci
+              - brcm,bcm7360-ohci
+              - brcm,bcm7362-ohci
+              - brcm,bcm7420-ohci
+              - brcm,bcm7425-ohci
+              - brcm,bcm7435-ohci
+              - hpe,gxp-ohci
+              - ibm,476gtr-ohci
+              - ingenic,jz4740-ohci
+              - rockchip,rk3588-ohci
+              - snps,hsdk-v1.0-ohci
+          - const: generic-ohci
+      - enum:
+          - generic-ohci
+          - ti,ohci-omap3
+      - items:
+          - enum:
+              - cavium,octeon-6335-ohci
+              - nintendo,hollywood-usb-ohci
+              - nxp,ohci-nxp
+              - st,spear600-ohci
+          - const: usb-ohci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      In case the Renesas R-Car Gen3 SoCs:
+        - if a host only channel: first clock should be host.
+        - if a USB DRD channel: first clock should be host and second
+          one should be peripheral
+
+  power-domains:
+    maxItems: 1
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+  big-endian-desc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors.
+
+  big-endian-regs:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian registers.
+
+  remote-wakeup-connected:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Remote wakeup is wired on the platform.
+
+  no-big-frame-no:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if frame_no lives in bits [15:0] of HCCA
+
+  num-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Overrides the detected port count
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  phy-names:
+    const: usb
+
+  iommus:
+    maxItems: 1
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+
+  transceiver:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The associated ISP1301 device. Necessary for the UDC controller for
+      connecting to the USB physical layer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: usb-hcd.yaml
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: nxp,ohci-nxp
+    then:
+      properties:
+        transceiver: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-ohci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+    else:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      ohci0: usb@1c14400 {
+          compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+          reg = <0x01c14400 0x100>;
+          interrupts = <64>;
+          clocks = <&usb_clk 6>, <&ahb_gates 2>;
+          phys = <&usbphy 1>;
+          phy-names = "usb";
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
new file mode 100644
index 0000000000..594ebb3ee4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB xHCI Controller
+
+maintainers:
+  - Mathias Nyman <mathias.nyman@intel.com>
+
+allOf:
+  - $ref: usb-xhci.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Generic xHCI device
+        const: generic-xhci
+      - description: Armada 37xx/375/38x/8k SoCs
+        items:
+          - enum:
+              - marvell,armada3700-xhci
+              - marvell,armada-375-xhci
+              - marvell,armada-380-xhci
+              - marvell,armada-8k-xhci
+          - const: generic-xhci
+      - description: Broadcom STB SoCs with xHCI
+        enum:
+          - brcm,xhci-brcm-v2
+          - brcm,bcm7445-xhci
+      - description: Generic xHCI device
+        const: xhci-platform
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    usb@f0931000 {
+      compatible = "generic-xhci";
+      reg = <0xf0931000 0x8c8>;
+      interrupts = <0x0 0x4e 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
new file mode 100644
index 0000000000..d0927f6768
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Genesys Logic GL850G USB 2.0 hub controller
+
+maintainers:
+  - Icenowy Zheng <uwu@icenowy.me>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb5e3,608
+      - usb5e3,610
+      - usb5e3,620
+
+  reg: true
+
+  reset-gpios:
+    description: GPIO controlling the RESET# pin.
+
+  vdd-supply:
+    description:
+      the regulator that provides 3.3V core power to the hub.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub: hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+            reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
new file mode 100644
index 0000000000..f196beb826
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/gpio-sbu-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based SBU mux
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  In USB Type-C applications the SBU lines needs to be connected, disconnected
+  and swapped depending on the altmode and orientation. This binding describes
+  a family of hardware solutions which switches between these modes using GPIO
+  signals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - onnn,fsusb43l10x
+          - pericom,pi3usb102
+      - const: gpio-sbu-mux
+
+  enable-gpios:
+    description: Switch enable GPIO
+
+  select-gpios:
+    description: Orientation select
+
+  vcc-supply:
+    description: power supply
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the SBU mux to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - enable-gpios
+  - select-gpios
+  - mode-switch
+  - orientation-switch
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    tcpm {
+        connector {
+            compatible = "usb-c-connector";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    tcpm_hs_out: endpoint {
+                        remote-endpoint = <&usb_hs_phy_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    tcpm_ss_out: endpoint {
+                        remote-endpoint = <&usb_ss_phy_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    tcpm_sbu_out: endpoint {
+                        remote-endpoint = <&sbu_mux_in>;
+                    };
+                };
+            };
+        };
+    };
+
+    sbu-mux {
+        compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+        enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+        select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+        mode-switch;
+        orientation-switch;
+
+        port {
+            sbu_mux_in: endpoint {
+                remote-endpoint = <&tcpm_sbu_out>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt
new file mode 100644
index 0000000000..e9445224fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/gr-udc.txt
@@ -0,0 +1,34 @@
+USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC.
+
+The GRUSBDC USB Device Controller core is available in the GRLIB VHDL
+IP core library.
+
+Note: In the ordinary environment for the core, a Leon SPARC system,
+these properties are built from information in the AMBA plug&play.
+
+Required properties:
+
+- name : Should be "GAISLER_USBDC" or "01_021"
+
+- reg : Address and length of the register set for the device
+
+- interrupts : Interrupt numbers for this device. Either one interrupt number
+	for all interrupts, or one for status related interrupts, one for IN
+	endpoint related interrupts and one for OUT endpoint related interrupts.
+
+Optional properties:
+
+- epobufsizes : Array of buffer sizes for OUT endpoints when they differ
+	from the default size of 1024. The array is indexed by the OUT endpoint
+	number. If the property is present it typically contains one entry for
+	each OUT endpoint of the core. Fewer entries overrides the default sizes
+	only for as many endpoints as the array contains.
+
+- epibufsizes : Array of buffer sizes for IN endpoints when they differ
+	from the default size of 1024. The array is indexed by the IN endpoint
+	number. If the property is present it typically contains one entry for
+	each IN endpoint of the core. Fewer entries overrides the default sizes
+	only for as many endpoints as the array contains.
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf
diff --git a/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
new file mode 100644
index 0000000000..f4633496b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/hisilicon,histb-xhci.txt
@@ -0,0 +1,45 @@
+HiSilicon STB xHCI
+
+The device node for HiSilicon STB xHCI host controller
+
+Required properties:
+ - compatible: should be "hisilicon,hi3798cv200-xhci"
+ - reg: specifies physical base address and size of the registers
+ - interrupts : interrupt used by the controller
+ - clocks: a list of phandle + clock-specifier pairs, one for each
+	entry in clock-names
+ - clock-names: must contain
+	"bus": for bus clock
+	"utmi": for utmi clock
+	"pipe": for pipe clock
+	"suspend": for suspend clock
+ - resets: a list of phandle and reset specifier pairs as listed in
+	reset-names property.
+ - reset-names: must contain
+	"soft": for soft reset
+ - phys: a list of phandle + phy specifier pairs
+ - phy-names: must contain at least one of following:
+	"inno": for inno phy
+	"combo": for combo phy
+
+Optional properties:
+  - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
+  - usb3-lpm-capable: determines if platform is USB3 LPM capable
+  - imod-interval-ns: default interrupt moderation interval is 40000ns
+
+Example:
+
+xhci0: xchi@f98a0000 {
+	compatible = "hisilicon,hi3798cv200-xhci";
+	reg = <0xf98a0000 0x10000>;
+	interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&crg HISTB_USB3_BUS_CLK>,
+		 <&crg HISTB_USB3_UTMI_CLK>,
+		 <&crg HISTB_USB3_PIPE_CLK>,
+		 <&crg HISTB_USB3_SUSPEND_CLK>;
+	clock-names = "bus", "utmi", "pipe", "suspend";
+	resets = <&crg 0xb0 12>;
+	reset-names = "soft";
+	phys = <&usb2_phy1_port1 0>, <&combphy0 PHY_TYPE_USB3>;
+	phy-names = "inno", "combo";
+};
diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
new file mode 100644
index 0000000000..4cc1496a91
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ingenic,musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx USB IP
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^usb@.*'
+
+  compatible:
+    oneOf:
+      - enum:
+          - ingenic,jz4770-musb
+          - ingenic,jz4740-musb
+      - items:
+          - const: ingenic,jz4725b-musb
+          - const: ingenic,jz4740-musb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: udc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: mc
+
+  phys:
+    maxItems: 1
+
+  usb-role-switch:
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phys
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+    usb_phy: usb-phy {
+      compatible = "usb-nop-xceiv";
+      #phy-cells = <0>;
+    };
+
+    udc: usb@13040000 {
+      compatible = "ingenic,jz4740-musb";
+      reg = <0x13040000 0x10000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <24>;
+      interrupt-names = "mc";
+
+      clocks = <&cgu JZ4740_CLK_UDC>;
+      clock-names = "udc";
+
+      phys = <&usb_phy>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
new file mode 100644
index 0000000000..d3511f48cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/intel,keembay-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay DWC3 USB controller
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-dwc3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: async_master
+      - const: ref
+      - const: alt_ref
+      - const: suspend
+
+  ranges: true
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_AUX_USB
+    #define KEEM_BAY_A53_AUX_USB_REF
+    #define KEEM_BAY_A53_AUX_USB_ALT_REF
+    #define KEEM_BAY_A53_AUX_USB_SUSPEND
+
+    usb {
+          compatible = "intel,keembay-dwc3";
+          clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>;
+          clock-names = "async_master", "ref", "alt_ref", "suspend";
+          ranges;
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          usb@34000000 {
+                compatible = "snps,dwc3";
+                reg = <0x34000000 0x10000>;
+                interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+                dr_mode = "peripheral";
+          };
+    };
diff --git a/Documentation/devicetree/bindings/usb/iproc-udc.txt b/Documentation/devicetree/bindings/usb/iproc-udc.txt
new file mode 100644
index 0000000000..272d7faf1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/iproc-udc.txt
@@ -0,0 +1,21 @@
+Broadcom IPROC USB Device controller.
+
+The device node is used for UDCs integrated into Broadcom's
+iProc family (Northstar2, Cygnus) of SoCs'. The UDC is based
+on Synopsys Designware Cores AHB Subsystem Device Controller
+IP.
+
+Required properties:
+ - compatible: Add the compatibility strings for supported platforms.
+   For Broadcom NS2 platform, add "brcm,ns2-udc","brcm,iproc-udc".
+   For Broadcom Cygnus platform, add "brcm,cygnus-udc", "brcm,iproc-udc".
+ - reg: Offset and length of UDC register set
+ - interrupts: description of interrupt line
+ - phys: phandle to phy node.
+
+Example:
+	udc_dwc: usb@664e0000 {
+		compatible = "brcm,ns2-udc", "brcm,iproc-udc";
+		reg = <0x664e0000 0x2000>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usbdrd_phy>;
diff --git a/Documentation/devicetree/bindings/usb/isp1301.txt b/Documentation/devicetree/bindings/usb/isp1301.txt
new file mode 100644
index 0000000000..ecd607dacb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/isp1301.txt
@@ -0,0 +1,24 @@
+* NXP ISP1301 USB transceiver
+
+Required properties:
+- compatible: must be "nxp,isp1301"
+- reg: I2C address of the ISP1301 device
+
+Optional properties of devices using ISP1301:
+- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the
+               ISP1301 instance associated with the respective USB driver
+
+Example:
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+
+	usbd@31020000 {
+		compatible = "nxp,lpc3220-udc";
+		reg = <0x31020000 0x300>;
+		interrupt-parent = <&mic>;
+		interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+		transceiver = <&isp1301>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt
new file mode 100644
index 0000000000..29f12a533f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/lpc32xx-udc.txt
@@ -0,0 +1,28 @@
+* NXP LPC32xx SoC USB Device Controller (UDC)
+
+Required properties:
+- compatible: Must be "nxp,lpc3220-udc"
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The USB interrupts:
+              * USB Device Low Priority Interrupt
+              * USB Device High Priority Interrupt
+              * USB Device DMA Interrupt
+              * External USB Transceiver Interrupt (OTG ATX)
+- transceiver: phandle of the associated ISP1301 device - this is necessary for
+               the UDC controller for connecting to the USB physical layer
+
+Example:
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+
+	usbd@31020000 {
+		compatible = "nxp,lpc3220-udc";
+		reg = <0x31020000 0x300>;
+		interrupt-parent = <&mic>;
+		interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+		transceiver = <&isp1301>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
new file mode 100644
index 0000000000..a0246aa1f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA/MMP EHCI
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    const: marvell,pxau2o-ehci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: USBCLK
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/marvell,mmp2.h>
+    usb@d4208000 {
+        compatible = "marvell,pxau2o-ehci";
+        reg = <0xd4208000 0x200>;
+        interrupts = <44>;
+        clocks = <&soc_clocks MMP2_CLK_USB>;
+        clock-names = "USBCLK";
+        phys = <&usb_otg_phy>;
+        phy-names = "usb";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
new file mode 100644
index 0000000000..276bf75542
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/maxim,max33359.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim TCPCI Type-C PD controller
+
+maintainers:
+  - Badhri Jagan Sridharan <badhri@google.com>
+
+description: Maxim TCPCI Type-C PD controller
+
+properties:
+  compatible:
+    enum:
+      - maxim,max33359
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        maxtcpc@25 {
+            compatible = "maxim,max33359";
+            reg = <0x25>;
+            interrupt-parent = <&gpa8>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+            connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                power-role = "dual";
+                try-power-role = "sink";
+                self-powered;
+                op-sink-microwatt = <2600000>;
+                new-source-frs-typec-current = <FRS_5V_1P5A>;
+                source-pdos = <PDO_FIXED(5000, 900,
+                                         PDO_FIXED_SUSPEND |
+                                         PDO_FIXED_USB_COMM |
+                                         PDO_FIXED_DATA_SWAP |
+                                         PDO_FIXED_DUAL_ROLE)>;
+                sink-pdos = <PDO_FIXED(5000, 3000,
+                                       PDO_FIXED_USB_COMM |
+                                       PDO_FIXED_DATA_SWAP |
+                                       PDO_FIXED_DUAL_ROLE)
+                                       PDO_FIXED(9000, 2000, 0)>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
new file mode 100644
index 0000000000..8e0f4ecc01
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAXIM MAX3420/1 USB Peripheral Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The controller provices USB2.0 compliant FullSpeed peripheral
+  implementation over the SPI interface.
+
+  Specifications about the part can be found at:
+    http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max3420-udc
+      - maxim,max3421-udc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: usb irq from max3420
+      - description: vbus detection irq
+    minItems: 1
+
+  interrupt-names:
+    items:
+      - const: udc
+      - const: vbus
+    minItems: 1
+
+  spi-max-frequency:
+    maximum: 26000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+      #include <dt-bindings/interrupt-controller/irq.h>
+      spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            udc@0 {
+                  compatible = "maxim,max3420-udc";
+                  reg = <0>;
+                  interrupt-parent = <&gpio>;
+                  interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>;
+                  interrupt-names = "udc", "vbus";
+                  spi-max-frequency = <12500000>;
+            };
+      };
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
new file mode 100644
index 0000000000..90495b1aee
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt
@@ -0,0 +1,23 @@
+Maxim Integrated SPI-based USB 2.0 host controller MAX3421E
+
+Required properties:
+ - compatible: Should be "maxim,max3421"
+ - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz.
+ - reg: chip select number to which this device is connected.
+ - maxim,vbus-en-pin: <GPOUTx ACTIVE_LEVEL>
+   GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus.
+   ACTIVE_LEVEL is 0 or 1.
+ - interrupts: the interrupt line description for the interrupt controller.
+   The driver configures MAX3421E for active low level triggered interrupts,
+   configure your interrupt line accordingly.
+
+Example:
+
+	usb@0 {
+		compatible = "maxim,max3421";
+		reg = <0>;
+		maxim,vbus-en-pin = <3 1>;
+		spi-max-frequency = <26000000>;
+		interrupt-parent = <&PIC>;
+		interrupts = <42>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
new file mode 100644
index 0000000000..053264e605
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators,
+  regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller.
+  This document only describes MT6360 Type-C Port Switch and Power Delivery controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6360-tcpc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: PD_IRQB
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      mt6360@34 {
+        compatible = "mediatek,mt6360";
+        reg = <0x34>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "IRQB";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        tcpc {
+          compatible = "mediatek,mt6360-tcpc";
+          interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+          interrupt-names = "PD_IRQB";
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
new file mode 100644
index 0000000000..747d0f16d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediatTek MT6370 Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MediaTek MT6370 is a multi-functional device.
+  It integrates charger, ADC, flash, RGB indicators,
+  regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller.
+  This document only describes MT6370 Type-C Port Switch and
+  Power Delivery controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-tcpc
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
new file mode 100644
index 0000000000..e9644e333d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 xHCI
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+description: |
+  There are two scenarios:
+  case 1: only supports xHCI driver;
+  case 2: supports dual-role mode, and the host is based on xHCI driver.
+
+properties:
+  # common properties for both case 1 and case 2
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-xhci
+          - mediatek,mt2712-xhci
+          - mediatek,mt7622-xhci
+          - mediatek,mt7623-xhci
+          - mediatek,mt7629-xhci
+          - mediatek,mt7986-xhci
+          - mediatek,mt8173-xhci
+          - mediatek,mt8183-xhci
+          - mediatek,mt8186-xhci
+          - mediatek,mt8188-xhci
+          - mediatek,mt8192-xhci
+          - mediatek,mt8195-xhci
+          - mediatek,mt8365-xhci
+      - const: mediatek,mtk-xhci
+
+  reg:
+    minItems: 1
+    items:
+      - description: the registers of xHCI MAC
+      - description: the registers of IP Port Control
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: ippc  # optional, only needed for case 1.
+
+  interrupts:
+    description:
+      use "interrupts-extended" when the interrupts are connected to the
+      separate interrupt controllers
+    minItems: 1
+    items:
+      - description: xHCI host controller interrupt
+      - description: optional, wakeup interrupt used to support runtime PM
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: host
+      - const: wakeup
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Controller clock used by normal mode
+      - description: Reference clock used by low power mode etc
+      - description: Mcu bus clock for register access
+      - description: DMA bus clock for data transfer
+      - description: controller clock
+      - description: frame count clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_ck  # required, the following ones are optional
+      - const: ref_ck
+      - const: mcu_ck
+      - const: dma_ck
+      - const: xhci_ck
+      - const: frmcnt_ck
+
+  phys:
+    description:
+      List of all PHYs used on this HCD, it's better to keep PHYs in order
+      as the hardware layout
+    minItems: 1
+    items:
+      - description: USB2/HS PHY    # required, others are optional
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+
+  vusb33-supply:
+    description: Regulator of USB AVDD3.3v
+
+  vbus-supply:
+    description: Regulator of USB VBUS5v
+
+  resets:
+    maxItems: 1
+
+  usb3-lpm-capable: true
+
+  usb2-lpm-disable: true
+
+  imod-interval-ns:
+    description:
+      Interrupt moderation interval value, it is 8 times as much as that
+      defined in the xHCI spec on MTK's controller.
+    default: 5000
+
+  # the following properties are only used for case 1
+  wakeup-source:
+    description: enable USB remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  mediatek,syscon-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to syscon used to access the register of the USB wakeup glue
+      layer between xHCI and SPM, the field should always be 3 cells long.
+    items:
+      items:
+        - description:
+            The first cell represents a phandle to syscon
+        - description:
+            The second cell represents the register base address of the glue
+            layer in syscon
+        - description: |
+            The third cell represents the hardware version of the glue layer,
+            1 - used by mt8173 etc, revision 1 without following IPM rule;
+            2 - used by mt2712 etc, revision 2 following IPM rule;
+            101 - used by mt8183, specific 1.01;
+            102 - used by mt8192, specific 1.02;
+            103 - used by mt8195, IP0, specific 1.03;
+            104 - used by mt8195, IP1, specific 1.04;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 104, 105, 106]
+
+  mediatek,u3p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u3ports, bit0 for u3port0,
+      bit1 for u3port1, ... etc
+
+  mediatek,u2p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u2ports, bit0 for u2port0,
+      bit1 for u2port1, ... etc
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[0-9a-f]{1}$":
+    type: object
+    description: The hard wired USB devices.
+
+dependencies:
+  wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    usb@11270000 {
+        compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+        reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+        clock-names = "sys_ck", "ref_ck";
+        phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
+        vusb33-supply = <&mt6397_vusb_reg>;
+        vbus-supply = <&usb_p1_vbus>;
+        imod-interval-ns = <10000>;
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        wakeup-source;
+        usb3-lpm-capable;
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
new file mode 100644
index 0000000000..a59d91243a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -0,0 +1,339 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek USB3 DRD Controller
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+allOf:
+  - $ref: usb-drd.yaml
+
+description: |
+  The DRD controller has a glue layer IPPC (IP Port Control), and its host is
+  based on xHCI.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2712-mtu3
+          - mediatek,mt8173-mtu3
+          - mediatek,mt8183-mtu3
+          - mediatek,mt8186-mtu3
+          - mediatek,mt8188-mtu3
+          - mediatek,mt8192-mtu3
+          - mediatek,mt8195-mtu3
+          - mediatek,mt8365-mtu3
+      - const: mediatek,mtu3
+
+  reg:
+    items:
+      - description: the registers of device MAC
+      - description: the registers of IP Port Control
+
+  reg-names:
+    items:
+      - const: mac
+      - const: ippc
+
+  interrupts:
+    description:
+      use "interrupts-extended" when the interrupts are connected to the
+      separate interrupt controllers
+    minItems: 1
+    items:
+      - description: SSUSB device controller interrupt
+      - description: optional, wakeup interrupt used to support runtime PM
+
+  interrupt-names:
+    items:
+      - const: device
+      - const: wakeup
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Controller clock used by normal mode
+      - description: Reference clock used by low power mode etc
+      - description: Mcu bus clock for register access
+      - description: DMA bus clock for data transfer
+      - description: DRD controller clock
+      - description: Frame count clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sys_ck  # required, others are optional
+      - const: ref_ck
+      - const: mcu_ck
+      - const: dma_ck
+      - const: xhci_ck
+      - const: frmcnt_ck
+
+  phys:
+    description:
+      List of all the USB PHYs used, it's better to keep the sequence
+      as the hardware layout.
+    minItems: 1
+    items:
+      - description: USB2/HS PHY    # required, others are optional
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY    # the following for backward compatible
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+      - description: USB3/SS(P) PHY
+      - description: USB2/HS PHY
+
+  vusb33-supply:
+    description: Regulator of USB AVDD3.3v
+
+  vbus-supply:
+    deprecated: true
+    description: |
+      Regulator of USB VBUS5v, needed when supports dual-role mode.
+      Particularly, if use an output GPIO to control a VBUS regulator, should
+      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
+      It's considered valid for compatibility reasons, not allowed for
+      new bindings, and put into a usb-connector node.
+
+  dr_mode:
+    enum: [host, peripheral, otg]
+    default: otg
+
+  maximum-speed:
+    enum: [super-speed-plus, super-speed, high-speed, full-speed]
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  ranges: true
+
+  extcon:
+    deprecated: true
+    description: |
+      Phandle to the extcon device detecting the IDDIG state, needed
+      when supports dual-role mode.
+      It's considered valid for compatibility reasons, not allowed for
+      new bindings, and use "usb-role-switch" property instead.
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch.
+    type: boolean
+
+  role-switch-default-mode:
+    enum: [host, peripheral]
+    default: host
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Connector for dual role switch, especially for "gpio-usb-b-connector"
+    type: object
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used. See graph.txt
+    $ref: /schemas/graph.yaml#/properties/port
+
+  enable-manual-drd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      supports manual dual-role switch via debugfs; usually used when
+      receptacle is TYPE-A and also wants to support dual-role mode.
+    type: boolean
+
+  wakeup-source:
+    description: enable USB remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  mediatek,syscon-wakeup:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to syscon used to access the register of the USB wakeup glue
+      layer between xHCI and SPM, the field should always be 3 cells long.
+    items:
+      items:
+        - description:
+            The first cell represents a phandle to syscon
+        - description:
+            The second cell represents the register base address of the glue
+            layer in syscon
+        - description: |
+            The third cell represents the hardware version of the glue layer,
+            1 - used by mt8173 etc, revision 1 without following IPM rule;
+            2 - used by mt2712 etc, revision 2 with following IPM rule;
+            101 - used by mt8183, specific 1.01;
+            102 - used by mt8192, specific 1.02;
+          enum: [1, 2, 101, 102]
+
+  mediatek,u3p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u3ports, bit0 for u3port0,
+      bit1 for u3port1, ... etc
+
+  mediatek,u2p-dis-msk:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mask to disable u2ports, bit0 for u2port0,
+      bit1 for u2port1, ... etc; but can't disable u2port0 if dual role mode
+      is enabled, so will be skipped in this case.
+
+# Required child node when support dual-role
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/usb/mediatek,mtk-xhci.yaml#
+    description:
+      The xhci should be added as subnode to mtu3 as shown in the following
+      example if the host mode is enabled.
+
+dependencies:
+  connector: [ usb-role-switch ]
+  port: [ usb-role-switch ]
+  role-switch-default-mode: [ usb-role-switch ]
+  wakeup-source: [ 'mediatek,syscon-wakeup' ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # Dual role switch by extcon
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>;
+        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+        vusb33-supply = <&mt6397_vusb_reg>;
+        vbus-supply = <&usb_p0_vbus>;
+        extcon = <&extcon_usb>;
+        dr_mode = "otg";
+        wakeup-source;
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        xhci: usb@11270000 {
+            compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
+            reg = <0x11270000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+            clock-names = "sys_ck", "ref_ck";
+            vusb33-supply = <&mt6397_vusb_reg>;
+        };
+    };
+
+  # Dual role switch by gpio-usb-b-connector
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    usb@112c1000 {
+        compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+        reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&u2port2 PHY_TYPE_USB2>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+        clocks = <&topckgen CLK_TOP_USB30_SEL>;
+        clock-names = "sys_ck";
+        dr_mode = "otg";
+        usb-role-switch;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        host0: usb@11270000 {
+            compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci";
+            reg = <0x11270000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+            clock-names = "sys_ck", "ref_ck";
+        };
+
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
+    };
+
+  # Dual role switch with type-c
+  - |
+    usb@11201000 {
+        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
+        reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
+        reg-names = "mac", "ippc";
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+        phys = <&u2port0 PHY_TYPE_USB2>;
+        clocks = <&clk26m>;
+        clock-names = "sys_ck";
+        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+        wakeup-source;
+        dr_mode = "otg";
+        usb-role-switch;
+        role-switch-default-mode = "host";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        host: usb@11200000 {
+            compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci";
+            reg = <0x11200000 0x1000>;
+            reg-names = "mac";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&clk26m>;
+            clock-names = "sys_ck";
+        };
+
+        port {
+            usb_role_sw: endpoint {
+                remote-endpoint = <&hs_ep>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
new file mode 100644
index 0000000000..a39d38db77
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MUSB DRD/OTG Controller
+
+maintainers:
+  - Min Guo <min.guo@mediatek.com>
+
+properties:
+  $nodename:
+    pattern: '^usb@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8516-musb
+          - mediatek,mt2701-musb
+          - mediatek,mt7623-musb
+      - const: mediatek,mtk-musb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: mc
+
+  clocks:
+    items:
+      - description: The main/core clock
+      - description: The system bus clock
+      - description: The 48Mhz clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: mcu
+      - const: univpll
+
+  phys:
+    maxItems: 1
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch. See usb/generic.txt
+    type: boolean
+
+  dr_mode:
+    enum:
+      - host
+      - otg
+      - peripheral
+
+  power-domains:
+    description: A phandle to USB power domain node to control USB's MTCMOS
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description: Connector for dual role switch
+    type: object
+
+dependencies:
+  usb-role-switch: [ connector ]
+  connector: [ usb-role-switch ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - phys
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    usb@11200000 {
+        compatible = "mediatek,mt2701-musb", "mediatek,mtk-musb";
+        reg = <0x11200000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "mc";
+        phys = <&u2port2 PHY_TYPE_USB2>;
+        dr_mode = "otg";
+        clocks = <&pericfg CLK_PERI_USB0>,
+                 <&pericfg CLK_PERI_USB0_MCU>,
+                 <&pericfg CLK_PERI_USB_SLV>;
+        clock-names = "main","mcu","univpll";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+        usb-role-switch;
+
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_vbus>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
new file mode 100644
index 0000000000..c5e9ce2e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS USB Controller
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-musb
+
+  dr_mode: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: mc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    usb@20201000 {
+        compatible = "microchip,mpfs-musb";
+        reg = <0x20201000 0x1000>;
+        clocks = <&clkcfg CLK_USB>;
+        interrupt-parent = <&plic>;
+        interrupts = <86>, <87>;
+        interrupt-names = "dma", "mc";
+        dr_mode = "host";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
new file mode 100644
index 0000000000..6d4cfd943f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB5744 4-port Hub Controller
+
+description:
+  Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS),
+  low power, low pin count configurable and fully compliant with the USB 3.1
+  Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed
+  (LS) USB signaling, offering complete coverage of all defined USB operating
+  speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0
+  controller, so 5 Gbps SuperSpeed data transfers are not affected by slower
+  USB 2.0 traffic.
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  compatible:
+    enum:
+      - usb424,2744
+      - usb424,5744
+      - microchip,usb5744
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO controlling the GRST# pin.
+
+  vdd-supply:
+    description:
+      3V3 power supply to the hub
+
+  vdd2-supply:
+    description:
+      1V2 power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+  i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of an usb hub connected via i2c bus.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,usb5744
+    then:
+      properties:
+        reset-gpios: false
+        vdd-supply: false
+        vdd2-supply: false
+        peer-hub: false
+        i2c-bus: false
+    else:
+      $ref: /schemas/usb/usb-device.yaml
+      required:
+        - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c: i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hub: usb-hub@2d {
+            compatible = "microchip,usb5744";
+            reg = <0x2d>;
+        };
+    };
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb424,2744";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            i2c-bus = <&hub>;
+            reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usb424,5744";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            i2c-bus = <&hub>;
+            reset-gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
new file mode 100644
index 0000000000..afc30e98b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -0,0 +1,110 @@
+MSM SoC HSUSB controllers
+
+EHCI
+
+Required properties:
+- compatible:	Should contain "qcom,ehci-host"
+- regs:			offset and length of the register set in the memory map
+- usb-phy:		phandle for the PHY device
+
+Example EHCI controller device node:
+
+	ehci: ehci@f9a55000 {
+		compatible = "qcom,ehci-host";
+		reg = <0xf9a55000 0x400>;
+		usb-phy = <&usb_otg>;
+	};
+
+USB PHY with optional OTG:
+
+Required properties:
+- compatible:   Should contain:
+  "qcom,usb-otg-ci" for chipsets with ChipIdea 45nm PHY
+  "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY
+
+- regs:         Offset and length of the register set in the memory map
+- interrupts:   interrupt-specifier for the OTG interrupt.
+
+- clocks:       A list of phandle + clock-specifier pairs for the
+                clocks listed in clock-names
+- clock-names:  Should contain the following:
+  "phy"         USB PHY reference clock
+  "core"        Protocol engine clock
+  "iface"       Interface bus clock
+  "alt_core"    Protocol engine clock for targets with asynchronous
+                reset methodology. (optional)
+
+- vdccx-supply: phandle to the regulator for the vdd supply for
+                digital circuit operation.
+- v1p8-supply:  phandle to the regulator for the 1.8V supply
+- v3p3-supply:  phandle to the regulator for the 3.3V supply
+
+- resets:       A list of phandle + reset-specifier pairs for the
+                resets listed in reset-names
+- reset-names:  Should contain the following:
+  "phy"         USB PHY controller reset
+  "link"        USB LINK controller reset
+
+- qcom,otg-control: OTG control (VBUS and ID notifications) can be one of
+                1 - PHY control
+                2 - PMIC control
+
+Optional properties:
+- dr_mode:      One of "host", "peripheral" or "otg". Defaults to "otg"
+
+- switch-gpio:  A phandle + gpio-specifier pair. Some boards are using Dual
+                SPDT USB Switch, witch is controlled by GPIO to de/multiplex
+                D+/D- USB lines between connectors.
+
+- qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device
+                Mode Eye Diagram test. Start address at which these values will be
+                written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as
+                "do not overwrite default value at this address".
+                For example: qcom,phy-init-sequence = < -1 0x63 >;
+                Will update only value at address ULPI_EXT_VENDOR_SPECIFIC + 1.
+
+- qcom,phy-num: Select number of pyco-phy to use, can be one of
+                0 - PHY one, default
+                1 - Second PHY
+                Some platforms may have configuration to allow USB
+                controller work with any of the two HSPHYs present.
+
+- qcom,vdd-levels: This property must be a list of three integer values
+                (no, min, max) where each value represents either a voltage
+                in microvolts or a value corresponding to voltage corner.
+
+- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy
+                and controller driver therefore enables pull-up explicitly
+                before starting controller using usbcmd run/stop bit.
+
+- extcon:       phandles to external connector devices. First phandle
+                should point to external connector, which provide "USB"
+                cable events, the second should point to external connector
+                device, which provide "USB-HOST" cable events. If one of
+                the external connector devices is not required empty <0>
+                phandle should be specified.
+
+Example HSUSB OTG controller device node:
+
+    usb@f9a55000 {
+        compatible = "qcom,usb-otg-snps";
+        reg = <0xf9a55000 0x400>;
+        interrupts = <0 134 0>;
+        dr_mode = "peripheral";
+
+        clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+                <&gcc GCC_USB_HS_AHB_CLK>;
+
+        clock-names = "phy", "core", "iface";
+
+        vddcx-supply = <&pm8841_s2_corner>;
+        v1p8-supply = <&pm8941_l6>;
+        v3p3-supply = <&pm8941_l24>;
+
+        resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+        reset-names = "phy", "link";
+
+        qcom,otg-control = <1>;
+        qcom,phy-init-sequence = < -1 0x63 >;
+        qcom,vdd-levels = <1 5 7>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
new file mode 100644
index 0000000000..c6e661e891
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra XUSB device mode controller (XUDC)
+
+description:
+  The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
+  USB 3.0 SuperSpeed protocols.
+
+maintainers:
+  - Nagarjuna Kristam <nkristam@nvidia.com>
+  - JC Kuo <jckuo@nvidia.com>
+  - Thierry Reding <treding@nvidia.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra210-xudc # For Tegra210
+          - nvidia,tegra186-xudc # For Tegra186
+          - nvidia,tegra194-xudc # For Tegra194
+          - nvidia,tegra234-xudc # For Tegra234
+
+  reg:
+    minItems: 2
+    items:
+      - description: XUSB device controller registers
+      - description: XUSB device PCI Config registers
+      - description: XUSB device registers.
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: base
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    maxItems: 1
+    description: Must contain the XUSB device interrupt.
+
+  clocks:
+    minItems: 4
+    items:
+      - description: Clock to enable core XUSB dev clock.
+      - description: Clock to enable XUSB super speed clock.
+      - description: Clock to enable XUSB super speed dev clock.
+      - description: Clock to enable XUSB high speed dev clock.
+      - description: Clock to enable XUSB full speed dev clock.
+
+  clock-names:
+    minItems: 4
+    items:
+      - const: dev
+      - const: ss
+      - const: ss_src
+      - const: fs_src
+      - const: hs_src
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: XUSBB(device) power-domain
+      - description: XUSBA(superspeed) power-domain
+
+  power-domain-names:
+    items:
+      - const: dev
+      - const: ss
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the XUSB pad controller that is used to configure the USB pads
+      used by the XUDC controller.
+
+  phys:
+    minItems: 1
+    maxItems: 2
+    description:
+      Must contain an entry for each entry in phy-names.
+      See ../phy/phy-bindings.txt for details.
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: usb2-0
+      - const: usb3-0
+
+  avddio-usb-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-xudc
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+      required:
+        - avddio-usb-supply
+        - hvdd-usb-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-xudc
+              - nvidia,tegra194-xudc
+              - nvidia,tegra234-xudc
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-xudc
+              - nvidia,tegra234-xudc
+    then:
+      required:
+        - dma-coherent
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@700d0000 {
+        compatible = "nvidia,tegra210-xudc";
+        reg = <0x700d0000 0x8000>,
+              <0x700d8000 0x1000>,
+              <0x700d9000 0x1000>;
+        reg-names = "base", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+        clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+
+        power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+        power-domain-names = "dev", "ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&micro_b>;
+        phy-names = "usb2-0";
+
+        avddio-usb-supply = <&vdd_pex_1v05>;
+        hvdd-usb-supply = <&vdd_3v3_sys>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
new file mode 100644
index 0000000000..d6ca8c9307
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra124-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  # required
+  compatible:
+    oneOf:
+      - description: NVIDIA Tegra124
+        const: nvidia,tegra124-xusb
+
+      - description: NVIDIA Tegra132
+        items:
+          - const: nvidia,tegra132-xusb
+          - const: nvidia,tegra124-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+      - description: base and length of the XUSB IPFS registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB host source clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed clock divider
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_host_src
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_div2
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  resets:
+    items:
+      - description: reset for the XUSB host controller
+      - description: reset for the SuperSpeed logic
+      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+  reset-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+      - const: xusb_src
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  # optional
+  phys:
+    minItems: 1
+    maxItems: 7
+
+  phy-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - hsic-0
+        - hsic-1
+        - usb3-0
+        - usb3-1
+
+  avddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 digital logic power supply. Must supply 1.05 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-erefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  avdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 3.3 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 3.3 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - nvidia,xusb-padctl
+  - phys
+  - phy-names
+  - avddio-pex-supply
+  - dvddio-pex-supply
+  - avdd-usb-supply
+  - hvdd-usb-ss-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@70090000 {
+        compatible = "nvidia,tegra124-xusb";
+        reg = <0x70090000 0x8000>,
+              <0x70098000 0x1000>,
+              <0x70099000 0x1000>;
+        reg-names = "hcd", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+                 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+                 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+                 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+                 <&tegra_car TEGRA124_CLK_CLK_M>,
+                 <&tegra_car TEGRA124_CLK_PLL_E>;
+        clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_div2", "xusb_ss_src",
+                      "xusb_hs_src", "xusb_fs_src", "pll_u_480m",
+                      "clk_m", "pll_e";
+        resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>;
+        reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&phy_usb2_1>, <&phy_usb2_2>, <&phy_pcie_0>;
+        phy-names = "usb2-1", "usb2-2", "usb3-0";
+
+        avddio-pex-supply = <&vdd_1v05_run>;
+        dvddio-pex-supply = <&vdd_1v05_run>;
+        avdd-usb-supply = <&vdd_3v3_lp0>;
+        avdd-pll-utmip-supply = <&vddio_1v8>;
+        avdd-pll-erefe-supply = <&avdd_1v05_run>;
+        avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
+        hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+        hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
new file mode 100644
index 0000000000..a04c6ce1e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra186-xusb.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra186-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 7
+
+  phy-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - hsic-0
+        - usb3-0
+        - usb3-1
+        - usb3-2
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    usb@3530000 {
+        compatible = "nvidia,tegra186-xusb";
+        reg = <0x03530000 0x8000>,
+              <0x03538000 0x1000>;
+        reg-names = "hcd", "fpci";
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+                 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA186_CLK_XUSB_SS>,
+                 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA186_CLK_CLK_M>,
+                 <&bpmp TEGRA186_CLK_XUSB_FS>,
+                 <&bpmp TEGRA186_CLK_PLLU>,
+                 <&bpmp TEGRA186_CLK_CLK_M>,
+                 <&bpmp TEGRA186_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+                      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+                      "pll_u_480m", "clk_m", "pll_e";
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
+        nvidia,xusb-padctl = <&padctl>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb3_0>;
+        phy-names = "usb2-0", "usb2-1", "usb3-0";
+    };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml
new file mode 100644
index 0000000000..b356793f73
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra194-xusb.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra194-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra194-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    usb@3610000 {
+        compatible = "nvidia,tegra194-xusb";
+        reg = <0x03610000 0x40000>,
+              <0x03600000 0x10000>;
+        reg-names = "hcd", "fpci";
+
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+                 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA194_CLK_XUSB_SS>,
+                 <&bpmp TEGRA194_CLK_CLK_M>,
+                 <&bpmp TEGRA194_CLK_XUSB_FS>,
+                 <&bpmp TEGRA194_CLK_UTMIPLL>,
+                 <&bpmp TEGRA194_CLK_CLK_M>,
+                 <&bpmp TEGRA194_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+                      "xusb_fs_src", "pll_u_480m", "clk_m",
+                      "pll_e";
+        interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA194_SID_XUSB_HOST>;
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&xusb_padctl>;
+
+        phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb2_3>, <&phy_usb3_0>,
+               <&phy_usb3_2>, <&phy_usb3_3>;
+        phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+    };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
new file mode 100644
index 0000000000..f60785f73d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
@@ -0,0 +1,23 @@
+Tegra SOC USB controllers
+
+The device node for a USB controller that is part of a Tegra
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
+   For Tegra30, must contain "nvidia,tegra30-ehci".  Otherwise, must contain
+   "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
+   tegra114, tegra124, tegra132, or tegra210.
+ - nvidia,phy : phandle of the PHY that the controller is connected to.
+ - clocks : Must contain one entry, for the module clock.
+   See ../clocks/clock-bindings.txt for details.
+ - resets : Must contain an entry for each entry in reset-names.
+   See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+   - usb
+
+Optional properties:
+ - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
+   USB ports, which need reset twice due to hardware issues.
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml
new file mode 100644
index 0000000000..90296613b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra210-xusb.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra210-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra xHCI controller supports both USB2 and USB3 interfaces
+  exposed by the Tegra XUSB pad controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra210-xusb
+
+  reg:
+    items:
+      - description: base and length of the xHCI host registers
+      - description: base and length of the XUSB FPCI registers
+      - description: base and length of the XUSB IPFS registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: ipfs
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB host source clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed clock divider
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_host_src
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_div2
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  resets:
+    items:
+      - description: reset for the XUSB host controller
+      - description: reset for the SuperSpeed logic
+      - description: shared reset for xusb_{ss,hs,fs,falcon,host}_src.
+
+  reset-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+      - const: xusb_src
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 9
+
+  phy-names:
+    minItems: 1
+    maxItems: 9
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - hsic-0
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dvddio-pex-supply:
+    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
+
+  hvddio-pex-supply:
+    description: High-voltage PCIe/USB3 power supply. Must supply 1.8 V.
+
+  avdd-usb-supply:
+    description: USB controller power supply. Must supply 3.3 V.
+
+  avdd-pll-utmip-supply:
+    description: UTMI PLL power supply. Must supply 1.8 V.
+
+  avdd-pll-uerefe-supply:
+    description: PLLE reference PLL power supply. Must supply 1.05 V.
+
+  dvdd-usb-ss-pll-supply:
+    description: PCIe/USB3 PLL power supply. Must supply 1.05 V.
+
+  hvdd-usb-ss-pll-e-supply:
+    description: High-voltage PLLE power supply. Must supply 1.8 V.
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@70090000 {
+        compatible = "nvidia,tegra210-xusb";
+        reg = <0x70090000 0x8000>,
+              <0x70098000 0x1000>,
+              <0x70099000 0x1000>;
+        reg-names = "hcd", "fpci", "ipfs";
+
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+                 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+                 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+                 <&tegra_car TEGRA210_CLK_CLK_M>,
+                 <&tegra_car TEGRA210_CLK_PLL_E>;
+        clock-names = "xusb_host", "xusb_host_src",
+                      "xusb_falcon_src", "xusb_ss",
+                      "xusb_ss_div2", "xusb_ss_src",
+                      "xusb_hs_src", "xusb_fs_src",
+                      "pll_u_480m", "clk_m", "pll_e";
+        resets = <&tegra_car 89>, <&tegra_car 156>,
+                 <&tegra_car 143>;
+        reset-names = "xusb_host", "xusb_ss", "xusb_src";
+        power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&padctl>;
+
+        phys = <&phy_usb2_0>, <&phy_usb2_1>, <&phy_usb2_2>, <&phy_usb2_3>,
+               <&phy_pcie_6>, <&phy_pcie_5>;
+        phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+                    "usb3-1";
+        dvddio-pex-supply = <&vdd_pex_1v05>;
+        hvddio-pex-supply = <&vdd_1v8>;
+        avdd-usb-supply = <&vdd_3v3_sys>;
+        avdd-pll-utmip-supply = <&vdd_1v8>;
+        avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+        dvdd-usb-ss-pll-supply = <&vdd_pex_1v05>;
+        hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+                compatible = "usb955,9ff";
+                reg = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
new file mode 100644
index 0000000000..db761dcbf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nvidia,tegra234-xusb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 xHCI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed by
+  the Tegra XUSB pad controller. The xHCI controller controls up to eight
+  ports; there are four USB 2.0 ports and four USB 3.2 Gen1 x1 ports.
+
+properties:
+  compatible:
+    const: nvidia,tegra234-xusb
+
+  reg:
+    items:
+      - description: xHCI host registers
+      - description: XUSB FPCI registers
+      - description: XUSB bar2 registers
+
+  reg-names:
+    items:
+      - const: hcd
+      - const: fpci
+      - const: bar2
+
+  interrupts:
+    items:
+      - description: xHCI host interrupt
+      - description: mailbox interrupt
+
+  clocks:
+    items:
+      - description: XUSB host clock
+      - description: XUSB Falcon source clock
+      - description: XUSB SuperSpeed clock
+      - description: XUSB SuperSpeed source clock
+      - description: XUSB HighSpeed clock source
+      - description: XUSB FullSpeed clock source
+      - description: USB PLL
+      - description: reference clock
+      - description: I/O PLL
+
+  clock-names:
+    items:
+      - const: xusb_host
+      - const: xusb_falcon_src
+      - const: xusb_ss
+      - const: xusb_ss_src
+      - const: xusb_hs_src
+      - const: xusb_fs_src
+      - const: pll_u_480m
+      - const: clk_m
+      - const: pll_e
+
+  interconnects:
+    items:
+      - description: read client
+      - description: write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  nvidia,xusb-padctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the XUSB pad controller that is used to configure
+      the USB pads used by the XHCI controller
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    maxItems: 8
+    items:
+      enum:
+        - usb2-0
+        - usb2-1
+        - usb2-2
+        - usb2-3
+        - usb3-0
+        - usb3-1
+        - usb3-2
+        - usb3-3
+
+  power-domains:
+    items:
+      - description: XUSBC power domain (for Host and USB 2.0)
+      - description: XUSBA power domain (for SuperSpeed)
+
+  power-domain-names:
+    items:
+      - const: xusb_host
+      - const: xusb_ss
+
+  dma-coherent: true
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+
+    usb@3610000 {
+        compatible = "nvidia,tegra234-xusb";
+        reg = <0x03610000 0x40000>,
+              <0x03600000 0x10000>,
+              <0x03650000 0x10000>;
+        reg-names = "hcd", "fpci", "bar2";
+
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+                 <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+                 <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+                 <&bpmp TEGRA234_CLK_XUSB_SS>,
+                 <&bpmp TEGRA234_CLK_CLK_M>,
+                 <&bpmp TEGRA234_CLK_XUSB_FS>,
+                 <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+                 <&bpmp TEGRA234_CLK_CLK_M>,
+                 <&bpmp TEGRA234_CLK_PLLE>;
+        clock-names = "xusb_host", "xusb_falcon_src",
+                      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+                      "xusb_fs_src", "pll_u_480m", "clk_m",
+                      "pll_e";
+        interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+                        <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+        power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+                        <&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+        power-domain-names = "xusb_host", "xusb_ss";
+
+        nvidia,xusb-padctl = <&xusb_padctl>;
+
+        phys = <&pad_lanes_usb2_0>;
+        phy-names = "usb2-0";
+    };
diff --git a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
new file mode 100644
index 0000000000..e2743a4b95
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP ISP1760 family controller
+
+maintainers:
+  - Sebastian Siewior <bigeasy@linutronix.de>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  NXP ISP1760 family, which includes ISP1760/1761/1763 devicetree controller
+  bindings
+
+properties:
+  compatible:
+    enum:
+      - nxp,usb-isp1760
+      - nxp,usb-isp1761
+      - nxp,usb-isp1763
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Host controller interrupt
+      - description: Device controller interrupt in isp1761
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: host
+      - const: peripheral
+
+  bus-width:
+    description:
+      Number of data lines.
+    enum: [8, 16, 32]
+    default: 32
+
+  dr_mode:
+    enum:
+      - host
+      - peripheral
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb@40200000 {
+        compatible = "nxp,usb-isp1763";
+        reg = <0x40200000 0x100000>;
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        bus-width = <16>;
+        dr_mode = "host";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
new file mode 100644
index 0000000000..28eb25ecba
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN5110 Typec Port Cotroller
+
+maintainers:
+  - Li Jun <jun.li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,ptn5110
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tcpci@50 {
+            compatible = "nxp,ptn5110";
+            reg = <0x50>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            usb_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                data-role = "dual";
+                power-role = "dual";
+                try-power-role = "sink";
+                source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+                sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) PDO_VAR(5000, 12000, 2000)>;
+                op-sink-microwatt = <10000000>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                       reg = <0>;
+                       typec1_dr_sw: endpoint {
+                           remote-endpoint = <&usb1_drd_sw>;
+                       };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/octeon-usb.txt b/Documentation/devicetree/bindings/usb/octeon-usb.txt
new file mode 100644
index 0000000000..205c8d24d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/octeon-usb.txt
@@ -0,0 +1,62 @@
+OCTEON/OCTEON+ USB BLOCK
+
+1) Main node
+
+   Required properties:
+
+   - compatible: must be "cavium,octeon-5750-usbn"
+
+   - reg: specifies the physical base address of the USBN block and
+     the length of the memory mapped region.
+
+   - #address-cells: specifies the number of cells needed to encode an
+     address. The value must be 2.
+
+   - #size-cells: specifies the number of cells used to represent the size
+     of an address. The value must be 2.
+
+   - ranges: specifies the translation between child address space and parent
+     address space.
+
+   - clock-frequency: speed of the USB reference clock. Allowed values are
+     12000000, 24000000 or 48000000.
+
+   - cavium,refclk-type: type of the USB reference clock. Allowed values are
+     "crystal" or "external".
+
+   - refclk-frequency: deprecated, use "clock-frequency".
+
+   - refclk-type: deprecated, use "cavium,refclk-type".
+
+2) Child node
+
+   The main node must have one child node which describes the built-in
+   USB controller.
+
+   Required properties:
+
+   - compatible: must be "cavium,octeon-5750-usbc"
+
+   - reg: specifies the physical base address of the USBC block and
+     the length of the memory mapped region.
+
+   - interrupts: specifies the interrupt number for the USB controller.
+
+3) Example:
+
+	usbn: usbn@1180068000000 {
+		compatible = "cavium,octeon-5750-usbn";
+		reg = <0x11800 0x68000000 0x0 0x1000>;
+		ranges; /* Direct mapping */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		clock-frequency = <12000000>;
+		cavium,refclk-type = "crystal";
+
+		usbc@16f0010000000 {
+			compatible = "cavium,octeon-5750-usbc";
+			reg = <0x16f00 0x10000000 0x0 0x80000>;
+			interrupts = <0 56>;
+		};
+	};
+
diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
new file mode 100644
index 0000000000..24a826d501
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
@@ -0,0 +1,23 @@
+DA8XX USB OHCI controller
+
+Required properties:
+
+ - compatible: Should be "ti,da830-ohci"
+ - reg:        Should contain one register range i.e. start and length
+ - interrupts: Description of the interrupt line
+ - phys:       Phandle for the PHY device
+ - phy-names:  Should be "usb-phy"
+
+Optional properties:
+ - vbus-supply: phandle of regulator that controls vbus power / over-current
+
+Example:
+
+ohci: usb@225000 {
+        compatible = "ti,da830-ohci";
+        reg = <0x225000 0x1000>;
+        interrupts = <59>;
+        phys = <&usb_phy 1>;
+        phy-names = "usb-phy";
+        vbus-supply = <&reg_usb_ohci>;
+};
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt
new file mode 100644
index 0000000000..1c735573ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -0,0 +1,36 @@
+ST USB OHCI controller
+
+Required properties:
+
+ - compatible		: must be "st,st-ohci-300x"
+ - reg			: physical base addresses of the controller and length of memory mapped
+			  region
+ - interrupts		: one OHCI controller interrupt should be described here
+ - clocks		: phandle list of usb clocks
+ - clock-names		: should be "ic" for interconnect clock and "clk48"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ - phys			: phandle for the PHY device
+ - phy-names		: should be "usb"
+
+ - resets		: phandle to the powerdown and reset controller for the USB IP
+ - reset-names		: should be "power" and "softreset".
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+	ohci0: usb@fe1ffc00 {
+		compatible = "st,st-ohci-300x";
+		reg = <0xfe1ffc00 0x100>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+		clocks = <&clk_s_a1_ls 0>,
+			 <&clockgen_b0 0>;
+		clock-names = "ic", "clk48";
+		phys = <&usb2_phy>;
+		phy-names = "usb";
+
+		resets = <&powerdown STIH416_USB0_POWERDOWN>,
+			 <&softreset STIH416_USB0_SOFTRESET>;
+		reset-names = "power", "softreset";
+	};
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
new file mode 100644
index 0000000000..f0dbc5ae45
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -0,0 +1,80 @@
+OMAP GLUE AND OTHER OMAP SPECIFIC COMPONENTS
+
+OMAP MUSB GLUE
+ - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb"
+ - ti,hwmods : must be "usb_otg_hs"
+ - multipoint : Should be "1" indicating the musb controller supports
+   multipoint. This is a MUSB configuration-specific setting.
+ - num-eps : Specifies the number of endpoints. This is also a
+   MUSB configuration-specific setting. Should be set to "16"
+ - ram-bits : Specifies the ram address size. Should be set to "12"
+ - interface-type : This is a board specific setting to describe the type of
+   interface between the controller and the phy. It should be "0" or "1"
+   specifying ULPI and UTMI respectively.
+ - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
+   represents PERIPHERAL.
+ - power : Should be "50". This signifies the controller can supply up to
+   100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
+ - phys : the phandle for the PHY device (used by generic PHY framework)
+ - phy-names : the names of the PHY corresponding to the PHYs present in the
+   *phy* phandle.
+
+Optional properties:
+ - ctrl-module : phandle of the control module this glue uses to write to
+   mailbox
+
+SOC specific device node entry
+usb_otg_hs: usb_otg_hs@4a0ab000 {
+	compatible = "ti,omap4-musb";
+	ti,hwmods = "usb_otg_hs";
+	multipoint = <1>;
+	num-eps = <16>;
+	ram-bits = <12>;
+	ctrl-module = <&omap_control_usb>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+};
+
+Board specific device node entry
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+OMAP DWC3 GLUE
+ - compatible : Should be
+	* "ti,dwc3" for OMAP5 and DRA7
+	* "ti,am437x-dwc3" for AM437x
+ - ti,hwmods : Should be "usb_otg_ss"
+ - reg : Address and length of the register set for the device.
+ - interrupts : The irq number of this device that is used to interrupt the
+   MPU
+ - #address-cells, #size-cells : Must be present if the device has sub-nodes
+ - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID.
+   It should be set to "1" for HW mode and "2" for SW mode.
+ - ranges: the child address space are mapped 1:1 onto the parent address space
+
+Optional Properties:
+ - extcon : phandle for the extcon device omap dwc3 uses to detect
+   connect/disconnect events.
+ - vbus-supply : phandle to the regulator device tree node if needed.
+
+Sub-nodes:
+The dwc3 core should be added as subnode to omap dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+
+omap_dwc3 {
+	compatible = "ti,dwc3";
+	ti,hwmods = "usb_otg_ss";
+	reg = <0x4a020000 0x1ff>;
+	interrupts = <0 93 4>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	utmi-mode = <2>;
+	ranges;
+};
+
diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
new file mode 100644
index 0000000000..c0201da002
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/onnn,nb7vpq904m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor Type-C DisplayPort ALT Mode Linear Redriver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - onnn,nb7vpq904m
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: power supply (1.8V)
+
+  enable-gpios: true
+
+  retimer-switch:
+    description: Flag the port as possible handle of SuperSpeed signals retiming
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                $ref: /schemas/types.yaml#/definitions/uint32-array
+                description: |
+                  An array of physical data lane indexes. Position determines how
+                  lanes are connected to the redriver, It is assumed the same order
+                  is kept on the other side of the redriver.
+                  Lane number represents the following
+                  - 0 is RX2 lane
+                  - 1 is TX2 lane
+                  - 2 is TX1 lane
+                  - 3 is RX1 lane
+                  The position determines the physical port of the redriver, in the
+                  order A, B, C & D.
+                oneOf:
+                  - items:
+                      - const: 0
+                      - const: 1
+                      - const: 2
+                      - const: 3
+                    description: |
+                      This is the lanes default layout
+                      - Port A to RX2 lane
+                      - Port B to TX2 lane
+                      - Port C to TX1 lane
+                      - Port D to RX1 lane
+                  - items:
+                      - const: 3
+                      - const: 2
+                      - const: 1
+                      - const: 0
+                    description: |
+                      This is the USBRX2/USBTX2 and USBRX1/USBTX1 swapped lanes layout
+                      - Port A to RX1 lane
+                      - Port B to TX1 lane
+                      - Port C to TX2 lane
+                      - Port D to RX2 lane
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+          handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@32 {
+            compatible = "onnn,nb7vpq904m";
+            reg = <0x32>;
+
+            vcc-supply = <&vreg_l15b_1p8>;
+
+            retimer-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&typec_con_ss>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    phy_con_ss: endpoint {
+                        remote-endpoint = <&usb_phy_ss>;
+                        data-lanes = <3 2 1 0>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&typec_dp_aux>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/pxa-usb.txt b/Documentation/devicetree/bindings/usb/pxa-usb.txt
new file mode 100644
index 0000000000..53fdae4fa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/pxa-usb.txt
@@ -0,0 +1,53 @@
+PXA USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "marvell,pxa-ohci" for USB controllers
+   used in host mode.
+
+Optional properties:
+ - "marvell,enable-port1", "marvell,enable-port2", "marvell,enable-port3"
+   If present, enables the appropriate USB port of the controller.
+ - "marvell,port-mode" selects the mode of the ports:
+	1 = PMM_NPS_MODE
+	2 = PMM_GLOBAL_MODE
+	3 = PMM_PERPORT_MODE
+ - "marvell,power-sense-low" - power sense pin is low-active.
+ - "marvell,power-control-low" - power control pin is low-active.
+ - "marvell,no-oc-protection" - disable over-current protection.
+ - "marvell,oc-mode-perport" - enable per-port over-current protection.
+ - "marvell,power_on_delay" Power On to Power Good time - in ms.
+
+Example:
+
+	usb0: ohci@4c000000 {
+		compatible = "marvell,pxa-ohci";
+		reg = <0x4c000000 0x100000>;
+		interrupts = <18>;
+		marvell,enable-port1;
+		marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+	};
+
+UDC
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-udc" for USB controllers
+   used in device mode.
+ - reg: usb device MMIO address space
+ - interrupts: single interrupt generated by the UDC IP
+ - clocks: input clock of the UDC IP (see clock-bindings.txt)
+
+Optional properties:
+ - gpios:
+   - gpio activated to control the USB D+ pullup (see gpio.txt)
+
+Example:
+
+		pxa27x_udc: udc@40600000 {
+			compatible = "marvell,pxa270-udc";
+			reg = <0x40600000 0x10000>;
+			interrupts = <11>;
+			clocks = <&pxa2xx_clks 11>;
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
new file mode 100644
index 0000000000..67591057f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -0,0 +1,537 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,ipq4019-dwc3
+          - qcom,ipq5332-dwc3
+          - qcom,ipq6018-dwc3
+          - qcom,ipq8064-dwc3
+          - qcom,ipq8074-dwc3
+          - qcom,ipq9574-dwc3
+          - qcom,msm8953-dwc3
+          - qcom,msm8994-dwc3
+          - qcom,msm8996-dwc3
+          - qcom,msm8998-dwc3
+          - qcom,qcm2290-dwc3
+          - qcom,qcs404-dwc3
+          - qcom,sa8775p-dwc3
+          - qcom,sc7180-dwc3
+          - qcom,sc7280-dwc3
+          - qcom,sc8280xp-dwc3
+          - qcom,sdm660-dwc3
+          - qcom,sdm670-dwc3
+          - qcom,sdm845-dwc3
+          - qcom,sdx55-dwc3
+          - qcom,sdx65-dwc3
+          - qcom,sm4250-dwc3
+          - qcom,sm6115-dwc3
+          - qcom,sm6125-dwc3
+          - qcom,sm6350-dwc3
+          - qcom,sm6375-dwc3
+          - qcom,sm8150-dwc3
+          - qcom,sm8250-dwc3
+          - qcom,sm8350-dwc3
+          - qcom,sm8450-dwc3
+          - qcom,sm8550-dwc3
+      - const: qcom,dwc3
+
+  reg:
+    description: Offset and length of register set for QSCRATCH wrapper
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  power-domains:
+    description: specifies a phandle to PM domain provider node
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - cfg_noc:: System Config NOC clock.
+       - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
+                60MHz for HS operation.
+       - iface:: System bus AXI clock.
+       - sleep:: Sleep clock, used for wakeup when USB3 core goes into low
+                 power mode (U3).
+       - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
+                     mode. Its frequency should be 19.2MHz.
+    minItems: 1
+    maxItems: 9
+
+  clock-names:
+    minItems: 1
+    maxItems: 9
+
+  resets:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: usb-ddr
+      - const: apps-usb
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
+
+  qcom,select-utmi-as-pipe-clk:
+    description:
+      If present, disable USB3 pipe_clk requirement.
+      Used when dwc3 operates without SSPHY and only
+      HS/FS/LS modes are supported.
+    type: boolean
+
+  wakeup-source: true
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      wakeup-source: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8064-dwc3
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master/Core clock, has to be >= 125 MHz
+                for SS operation and >= 60MHz for HS operation.
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-dwc3
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,sa8775p-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sm6350-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 9
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: noc_aggr
+            - const: noc_aggr_north
+            - const: noc_aggr_south
+            - const: noc_sys
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 6
+        clock-names:
+          oneOf:
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: iface
+                - const: sleep
+                - const: mock_utmi
+                - const: bus
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+                - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-dwc3
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8350-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 6
+        clock-names:
+          minItems: 5
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq6018-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,ipq8074-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sm4250-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm6350-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8350-dwc3
+              - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: The interrupt that is asserted
+                when a wakeup event is received on USB2 bus.
+            - description: The interrupt that is asserted
+                when a wakeup event is received on USB3 bus.
+            - description: Wakeup event on DM line.
+            - description: Wakeup event on DP line.
+        interrupt-names:
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+            - const: dm_hs_phy_irq
+            - const: dp_hs_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,sm6115-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5332-dwc3
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: hs_phy_irq
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@a6f8800 {
+            compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+            reg = <0 0x0a6f8800 0 0x400>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+                     <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+                     <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                     <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+                     <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+            clock-names = "cfg_noc",
+                          "core",
+                          "iface",
+                          "sleep",
+                          "mock_utmi";
+
+            assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                          <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+            assigned-clock-rates = <19200000>, <150000000>;
+
+            interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hs_phy_irq", "ss_phy_irq",
+                          "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+            power-domains = <&gcc USB30_PRIM_GDSC>;
+
+            resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+            usb@a600000 {
+                compatible = "snps,dwc3";
+                reg = <0 0x0a600000 0 0xcd00>;
+                interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+                iommus = <&apps_smmu 0x740 0>;
+                snps,dis_u2_susphy_quirk;
+                snps,dis_enblslpm_quirk;
+                phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+                phy-names = "usb2-phy", "usb3-phy";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
new file mode 100644
index 0000000000..55df3129a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC based USB Type-C block
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description:
+  Qualcomm PMIC Type-C block
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-typec
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  reg:
+    description: Type-C port and pdphy SPMI register base offsets
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Type-C CC attach notification, VBUS error, tCCDebounce done
+      - description: Type-C VCONN powered
+      - description: Type-C CC state change
+      - description: Type-C VCONN over-current
+      - description: Type-C VBUS state change
+      - description: Type-C Attach/detach notification
+      - description: Type-C Legacy cable detect
+      - description: Type-C Try.Src Try.Snk state change
+      - description: Power Domain Signal TX - HardReset or CableReset signal TX
+      - description: Power Domain Signal RX - HardReset or CableReset signal RX
+      - description: Power Domain TX complete
+      - description: Power Domain RX complete
+      - description: Power Domain TX fail
+      - description: Power Domain TX message discard
+      - description: Power Domain RX message discard
+      - description: Power Domain Fast Role Swap event
+
+  interrupt-names:
+    items:
+      - const: or-rid-detect-change
+      - const: vpd-detect
+      - const: cc-state-change
+      - const: vconn-oc
+      - const: vbus-change
+      - const: attach-detach
+      - const: legacy-cable-detect
+      - const: try-snk-src-detect
+      - const: sig-tx
+      - const: sig-rx
+      - const: msg-tx
+      - const: msg-rx
+      - const: msg-tx-failed
+      - const: msg-tx-discarded
+      - const: msg-rx-discarded
+      - const: fr-swap
+
+  vdd-vbus-supply:
+    description: VBUS power supply.
+
+  vdd-pdphy-supply:
+    description: VDD regulator supply to the PDPHY.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Contains a port which produces data-role switching messages.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - vdd-vbus-supply
+  - vdd-pdphy-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/usb/pd.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8150b_typec: typec@1500 {
+            compatible = "qcom,pm8150b-typec";
+            reg = <0x1500>,
+                  <0x1700>;
+
+            interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+                         <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+                         <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+                         <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+                         <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+
+            interrupt-names = "or-rid-detect-change",
+                              "vpd-detect",
+                              "cc-state-change",
+                              "vconn-oc",
+                              "vbus-change",
+                              "attach-detach",
+                              "legacy-cable-detect",
+                              "try-snk-src-detect",
+                              "sig-tx",
+                              "sig-rx",
+                              "msg-tx",
+                              "msg-rx",
+                              "msg-tx-failed",
+                              "msg-tx-discarded",
+                              "msg-rx-discarded",
+                              "fr-swap";
+
+            vdd-vbus-supply = <&pm8150b_vbus>;
+            vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+            connector {
+                compatible = "usb-c-connector";
+
+                power-role = "source";
+                data-role = "dual";
+                self-powered;
+
+                source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE |
+                               PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        pmic_typec_mux_out: endpoint {
+                            remote-endpoint = <&usb_phy_typec_mux_in>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        pmic_typec_role_switch_out: endpoint {
+                            remote-endpoint = <&usb_role_switch_in>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+    usb {
+        dr_mode = "otg";
+        usb-role-switch;
+        port {
+            usb_role_switch_in: endpoint {
+                remote-endpoint = <&pmic_typec_role_switch_out>;
+            };
+        };
+    };
+
+    usb-phy {
+        orientation-switch;
+        port {
+            usb_phy_typec_mux_in: endpoint {
+                remote-endpoint = <&pmic_typec_mux_out>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
new file mode 100644
index 0000000000..f0784d2e86
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTS5411 USB 3.0 hub controller
+
+maintainers:
+  - Matthias Kaehlcke <mka@chromium.org>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbbda,5411
+          - usbbda,411
+
+  reg: true
+
+  vdd-supply:
+    description:
+      phandle to the regulator that provides power to the hub.
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - peer-hub
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usbbda,5411";
+            reg = <1>;
+            vdd-supply = <&pp3300_hub>;
+            peer-hub = <&hub_3_0>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+            compatible = "usbbda,411";
+            reg = <2>;
+            vdd-supply = <&pp3300_hub>;
+            peer-hub = <&hub_2_0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml b/Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml
new file mode 100644
index 0000000000..b6e84a2a69
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,rzn1-usbf.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,rzn1-usbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 SoCs USBF (USB Function) controller
+
+description: |
+   The Renesas USBF controller is an USB2.0 device
+   controller (UDC).
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-usbf
+      - const: renesas,rzn1-usbf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Internal bus clock (AHB) for Function
+      - description: Internal bus clock (AHB) for Power Management
+
+  clock-names:
+    items:
+      - const: hclkf
+      - const: hclkpm
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: The USBF EPC interrupt
+      - description: The USBF AHB-EPC interrupt
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    usb@4001e000 {
+        compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf";
+        reg = <0x4001e000 0x2000>;
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_USBF>,
+                 <&sysctrl R9A06G032_HCLK_USBPM>;
+        clock-names = "hclkf", "hclkpm";
+        power-domains = <&sysctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml
new file mode 100644
index 0000000000..ff625600d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,rzv2m-usb3drd.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,rzv2m-usb3drd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M USB 3.1 DRD controller
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  The RZ/V2{M, MA} USB3.1 DRD module supports the following functions
+  * Role swapping function by the ID pin of the Micro-AB receptacle
+  * Battery Charging Specification Revision 1.2
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a09g011-usb3drd  # RZ/V2M
+          - renesas,r9a09g055-usb3drd  # RZ/V2MA
+      - const: renesas,rzv2m-usb3drd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Dual Role Device (DRD)
+      - description: Battery Charging
+      - description: Global Purpose Input
+
+  interrupt-names:
+    items:
+      - const: drd
+      - const: bc
+      - const: gpi
+
+  clocks:
+    items:
+      - description: Peripheral AXI clock
+      - description: APB clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: reg
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+patternProperties:
+  "^usb3peri@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/usb/renesas,usb3-peri.yaml
+
+  "^usb@[0-9a-f]+$":
+    type: object
+    $ref: renesas,usb-xhci.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb3drd: usb@85070400 {
+        compatible = "renesas,r9a09g011-usb3drd", "renesas,rzv2m-usb3drd";
+        reg = <0x85070400 0x100>;
+        interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "drd", "bc", "gpi";
+        clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+                 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+        clock-names = "axi", "reg";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A09G011_USB_DRD_RESET>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        usb3host: usb@85060000 {
+           compatible = "renesas,r9a09g011-xhci",
+                        "renesas,rzv2m-xhci";
+           reg = <0x85060000 0x2000>;
+           interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+           clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>,
+                    <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+           clock-names = "axi", "reg";
+           power-domains = <&cpg>;
+           resets = <&cpg R9A09G011_USB_ARESETN_H>;
+        };
+
+        usb3peri: usb3peri@85070000 {
+           compatible = "renesas,r9a09g011-usb3-peri",
+                        "renesas,rzv2m-usb3-peri";
+           reg = <0x85070000 0x400>;
+           interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+           clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+                    <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+           clock-names = "axi", "reg";
+           power-domains = <&cpg>;
+           resets = <&cpg R9A09G011_USB_ARESETN_P>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
new file mode 100644
index 0000000000..1a07c0d2b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,usb-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB xHCI controllers
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,xhci-r8a7742 # RZ/G1H
+              - renesas,xhci-r8a7743 # RZ/G1M
+              - renesas,xhci-r8a7744 # RZ/G1N
+              - renesas,xhci-r8a7790 # R-Car H2
+              - renesas,xhci-r8a7791 # R-Car M2-W
+              - renesas,xhci-r8a7793 # R-Car M2-N
+          - const: renesas,rcar-gen2-xhci # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,xhci-r8a774a1 # RZ/G2M
+              - renesas,xhci-r8a774b1 # RZ/G2N
+              - renesas,xhci-r8a774c0 # RZ/G2E
+              - renesas,xhci-r8a774e1 # RZ/G2H
+              - renesas,xhci-r8a7795  # R-Car H3
+              - renesas,xhci-r8a7796  # R-Car M3-W
+              - renesas,xhci-r8a77961 # R-Car M3-W+
+              - renesas,xhci-r8a77965 # R-Car M3-N
+              - renesas,xhci-r8a77990 # R-Car E3
+          - const: renesas,rcar-gen3-xhci # R-Car Gen3 and RZ/G2
+      - items:
+          - enum:
+              - renesas,r9a09g011-xhci # RZ/V2M
+              - renesas,r9a09g055-xhci # RZ/V2MA
+          - const: renesas,rzv2m-xhci  # RZ/{V2M, V2MA}
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Main clock for host
+      - description: Register access clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: reg
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: usb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+allOf:
+  - $ref: usb-xhci.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzv2m-xhci
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    xhci0: usb@ee000000 {
+        compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+        reg = <0xee000000 0xc00>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 328>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 328>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
new file mode 100644
index 0000000000..b2b811a0ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,usb3-peri.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB 3.0 Peripheral controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-usb3-peri # RZ/G2M
+              - renesas,r8a774b1-usb3-peri # RZ/G2N
+              - renesas,r8a774c0-usb3-peri # RZ/G2E
+              - renesas,r8a774e1-usb3-peri # RZ/G2H
+              - renesas,r8a7795-usb3-peri  # R-Car H3
+              - renesas,r8a7796-usb3-peri  # R-Car M3-W
+              - renesas,r8a77961-usb3-peri # R-Car M3-W+
+              - renesas,r8a77965-usb3-peri # R-Car M3-N
+              - renesas,r8a77990-usb3-peri # R-Car E3
+          - const: renesas,rcar-gen3-usb3-peri
+
+      - items:
+          - enum:
+              - renesas,r9a09g011-usb3-peri # RZ/V2M
+              - renesas,r9a09g055-usb3-peri # RZ/V2MA
+          - const: renesas,rzv2m-usb3-peri
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: reg
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch.
+
+  companion:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of a companion.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS) data bus.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) data bus.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzv2m-usb3-peri
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+        - resets
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a774c0-sysc.h>
+
+    usb3_peri0: usb@ee020000 {
+        compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri";
+        reg = <0xee020000 0x400>;
+        interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 328>;
+        companion = <&xhci0>;
+        usb-role-switch;
+
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                        reg = <0>;
+                        usb3_hs_ep: endpoint {
+                                remote-endpoint = <&hs_ep>;
+                        };
+                };
+                port@1 {
+                        reg = <1>;
+                        usb3_role_switch: endpoint {
+                                remote-endpoint = <&hd3ss3220_out_ep>;
+                        };
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
new file mode 100644
index 0000000000..bad55dfb2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,usbhs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USBHS (HS-USB) controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,usbhs-r7s72100 # RZ/A1
+          - const: renesas,rza1-usbhs
+
+      - items:
+          - enum:
+              - renesas,usbhs-r7s9210   # RZ/A2
+              - renesas,usbhs-r9a07g043 # RZ/G2UL
+              - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
+              - renesas,usbhs-r9a07g054 # RZ/V2L
+          - const: renesas,rza2-usbhs
+
+      - items:
+          - enum:
+              - renesas,usbhs-r8a7742  # RZ/G1H
+              - renesas,usbhs-r8a7743  # RZ/G1M
+              - renesas,usbhs-r8a7744  # RZ/G1N
+              - renesas,usbhs-r8a7745  # RZ/G1E
+              - renesas,usbhs-r8a77470 # RZ/G1C
+              - renesas,usbhs-r8a7790  # R-Car H2
+              - renesas,usbhs-r8a7791  # R-Car M2-W
+              - renesas,usbhs-r8a7792  # R-Car V2H
+              - renesas,usbhs-r8a7793  # R-Car M2-N
+              - renesas,usbhs-r8a7794  # R-Car E2
+          - const: renesas,rcar-gen2-usbhs
+
+      - items:
+          - enum:
+              - renesas,usbhs-r8a774a1 # RZ/G2M
+              - renesas,usbhs-r8a774b1 # RZ/G2N
+              - renesas,usbhs-r8a774c0 # RZ/G2E
+              - renesas,usbhs-r8a774e1 # RZ/G2H
+              - renesas,usbhs-r8a7795  # R-Car H3
+              - renesas,usbhs-r8a7796  # R-Car M3-W
+              - renesas,usbhs-r8a77961 # R-Car M3-W+
+              - renesas,usbhs-r8a77965 # R-Car M3-N
+              - renesas,usbhs-r8a77990 # R-Car E3
+              - renesas,usbhs-r8a77995 # R-Car D3
+          - const: renesas,rcar-gen3-usbhs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: USB 2.0 host
+      - description: USB 2.0 peripheral
+      - description: USB 2.0 clock selector
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  renesas,buswait:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Integer to use BUSWAIT register.
+
+  renesas,enable-gpio:
+    maxItems: 1
+    description: |
+      gpio specifier to check GPIO determining if USB function should be
+      enabled.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: usb
+
+  dmas:
+    minItems: 2
+    maxItems: 4
+
+  dma-names:
+    minItems: 2
+    items:
+      - const: ch0
+      - const: ch1
+      - const: ch2
+      - const: ch3
+
+  dr_mode: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    items:
+      - description: USB 2.0 host
+      - description: USB 2.0 peripheral
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,usbhs-r9a07g043
+              - renesas,usbhs-r9a07g044
+              - renesas,usbhs-r9a07g054
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: U2P_IXL_INT
+            - description: U2P_INT_DMA[0]
+            - description: U2P_INT_DMA[1]
+            - description: U2P_INT_DMAERR
+      required:
+        - resets
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    usbhs: usb@e6590000 {
+        compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
+        reg = <0xe6590000 0x100>;
+        interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 704>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
new file mode 100644
index 0000000000..6f8115db2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -0,0 +1,44 @@
+Richtek RT1711H TypeC PD Controller.
+
+Required properties:
+ - compatible : Must be "richtek,rt1711h".
+ - reg : Must be 0x4e, it's slave address of RT1711H.
+ - interrupts : <a b> where a is the interrupt number and b represents an
+   encoding of the sense and level information for the interrupt.
+
+Required sub-node:
+- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
+  of connector node are specified in
+  Documentation/devicetree/bindings/connector/usb-connector.yaml
+
+Example :
+rt1711h@4e {
+	compatible = "richtek,rt1711h";
+	reg = <0x4e>;
+	interrupt-parent = <&gpio26>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+		power-role = "dual";
+		try-power-role = "sink";
+		source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+		sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+			     PDO_VAR(5000, 12000, 2000)>;
+		op-sink-microwatt = <10000000>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				usb_con_ss: endpoint {
+					remote-endpoint = <&usb3_data_ss>;
+				};
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
new file mode 100644
index 0000000000..8da4d2ad1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  The RT1711H is a USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1711h
+      - richtek,rt1715
+    description:
+      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1711h@4e {
+        compatible = "richtek,rt1711h";
+        reg = <0x4e>;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          data-role = "dual";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          op-sink-microwatt = <10000000>;
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+            port@2 {
+              reg = <2>;
+              endpoint {
+                remote-endpoint = <&dp_aux>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
new file mode 100644
index 0000000000..07bec1fe6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/richtek,rt1719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT1719 sink-only Type-C PD controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT1719 is a sink-only USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1719
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    description: enable IRQ remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1719@43 {
+        compatible = "richtek,rt1719";
+        reg = <0x43>;
+        interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
new file mode 100644
index 0000000000..291844c8f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/rockchip,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The common content of the node is defined in snps,dwc3.yaml.
+
+  Phy documentation is provided in the following places.
+
+  USB2.0 PHY
+  Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+
+  Type-C PHY
+  Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3328-dwc3
+          - rockchip,rk3568-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3328-dwc3
+          - rockchip,rk3568-dwc3
+      - const: snps,dwc3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description:
+          Controller reference clock, must to be 24 MHz
+      - description:
+          Controller suspend clock, must to be 24 MHz or 32 KHz
+      - description:
+          Master/Core clock, must to be >= 62.5 MHz for SS
+          operation and >= 30MHz for HS operation
+      - description:
+          Controller grf clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: ref_clk
+      - const: suspend_clk
+      - const: bus_clk
+      - const: grf_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: usb3-otg
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3328-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbdrd3_0: usb@fe800000 {
+        compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+        reg = <0x0 0xfe800000 0x0 0x100000>;
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+                 <&cru ACLK_USB3OTG>;
+        clock-names = "ref_clk", "suspend_clk",
+                      "bus_clk", "grf_clk";
+        dr_mode = "otg";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml
new file mode 100644
index 0000000000..3159f9a6a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,rk3399-dwc3.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/rockchip,rk3399-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3399-dwc3
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  ranges: true
+
+  clocks:
+    items:
+      - description:
+          Controller reference clock, must to be 24 MHz
+      - description:
+          Controller suspend clock, must to be 24 MHz or 32 KHz
+      - description:
+          Master/Core clock, must to be >= 62.5 MHz for SS
+          operation and >= 30MHz for HS operation
+      - description:
+          USB3 aclk peri
+      - description:
+          USB3 aclk
+      - description:
+          Controller grf clock
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: suspend_clk
+      - const: bus_clk
+      - const: aclk_usb3_rksoc_axi_perf
+      - const: aclk_usb3
+      - const: grf_clk
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: usb3-otg
+
+patternProperties:
+  '^usb@':
+    $ref: snps,dwc3.yaml#
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb {
+            compatible = "rockchip,rk3399-dwc3";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+                     <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+                     <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+            clock-names = "ref_clk", "suspend_clk",
+                          "bus_clk", "aclk_usb3_rksoc_axi_perf",
+                          "aclk_usb3", "grf_clk";
+            resets = <&cru SRST_A_USB3_OTG0>;
+            reset-names = "usb3-otg";
+
+            usb@fe800000 {
+                compatible = "snps,dwc3";
+                reg = <0x0 0xfe800000 0x0 0x100000>;
+                interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+                         <&cru SCLK_USB3OTG0_SUSPEND>;
+                clock-names = "ref", "bus_early", "suspend";
+                dr_mode = "otg";
+                phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+                phy-names = "usb2-phy", "usb3-phy";
+                phy_type = "utmi_wide";
+                snps,dis_enblslpm_quirk;
+                snps,dis-u2-freeclk-exists-quirk;
+                snps,dis_u2_susphy_quirk;
+                snps,dis-del-phy-power-chg-quirk;
+                snps,dis-tx-ipgap-linecheck-quirk;
+                power-domains = <&power RK3399_PD_USB3>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
new file mode 100644
index 0000000000..26c85afd0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
@@ -0,0 +1,22 @@
+Samsung S3C2410 and compatible SoC USB controller
+
+OHCI
+
+Required properties:
+ - compatible: should be "samsung,s3c2410-ohci" for USB host controller
+ - reg: address and length of the controller memory mapped region
+ - interrupts: interrupt number for the USB OHCI controller
+ - clocks: Should reference the bus and host clocks
+ - clock-names: Should contain two strings
+		"usb-bus-host" for the USB bus clock
+		"usb-host" for the USB host clock
+
+Example:
+
+usb0: ohci@49000000 {
+	compatible = "samsung,s3c2410-ohci";
+	reg = <0x49000000 0x100>;
+	interrupts = <0 0 26 3>;
+	clocks = <&clocks UCLK>, <&clocks HCLK_USBH>;
+	clock-names = "usb-bus-host", "usb-host";
+};
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
new file mode 100644
index 0000000000..1ade99e85b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DWC3 Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dwusb3
+      - samsung,exynos5433-dwusb3
+      - samsung,exynos7-dwusb3
+      - samsung,exynos850-dwusb3
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  ranges: true
+
+  '#size-cells':
+    const: 1
+
+  vdd10-supply:
+    description: 1.0V power supply
+
+  vdd33-supply:
+    description: 3.0V/3.3V power supply
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - '#size-cells'
+  - vdd10-supply
+  - vdd33-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: usbdrd30
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: susp_clk
+            - const: phyclk
+            - const: pipe_pclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: usbdrd30
+            - const: usbdrd30_susp_clk
+            - const: usbdrd30_axius_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: bus_early
+            - const: ref
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@12000000 {
+        compatible = "samsung,exynos5250-dwusb3";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x12000000 0x10000>;
+        clocks = <&clock CLK_USBD300>;
+        clock-names = "usbdrd30";
+        vdd33-supply = <&ldo9_reg>;
+        vdd10-supply = <&ldo11_reg>;
+
+        usb@0 {
+            compatible = "snps,dwc3";
+            reg = <0x0 0x10000>;
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+            phy-names = "usb2-phy", "usb3-phy";
+            snps,dis_u3_susphy_quirk;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
new file mode 100644
index 0000000000..caa572dcee
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 2.0 EHCI/OHCI Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-ehci
+      - samsung,exynos4210-ohci
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhost
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  phy-names:
+    items:
+      enum: [host, hsic0, hsic1]
+    minItems: 1
+    maxItems: 3
+
+  reg:
+    maxItems: 1
+
+  samsung,vbus-gpio:
+    description:
+      Only for controller in EHCI mode, if present, specifies the GPIO that
+      needs to be pulled up for the bus to be powered.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+  - reg
+
+allOf:
+  - $ref: usb-hcd.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-ohci
+    then:
+      properties:
+        samsung,vbus-gpio: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@12110000 {
+        compatible = "samsung,exynos4210-ehci";
+        reg = <0x12110000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb0424,9514";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            usbether@1 {
+                compatible = "usb0424,ec00";
+                reg = <1>;
+                local-mac-address = [00 00 00 00 00 00];
+            };
+        };
+    };
+
+    usb@12120000 {
+        compatible = "samsung,exynos4210-ohci";
+        reg = <0x12120000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
new file mode 100644
index 0000000000..6156dc26e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/smsc,usb3503.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SMSC USB3503 High-Speed Hub Controller
+
+maintainers:
+  - Dongjin Kim <tobetter@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - smsc,usb3503
+      - smsc,usb3503a
+      - smsc,usb3803
+
+  reg:
+    maxItems: 1
+
+  connect-gpios:
+    maxItems: 1
+    description: >
+      GPIO for connect
+
+  intn-gpios:
+    maxItems: 1
+    description: >
+      GPIO for interrupt
+
+  reset-gpios:
+    maxItems: 1
+    description: >
+      GPIO for reset
+
+  bypass-gpios:
+    maxItems: 1
+    description: >
+      GPIO for bypass.
+      Control signal to select between HUB MODE and BYPASS MODE.
+
+  disabled-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      minimum: 1
+      maximum: 3
+    description: >
+      Specifies the ports unused using their port number. Do not describe this
+      property if all ports have to be enabled.
+
+  initial-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Specifies initial mode. 1 for Hub mode, 2 for standby mode and 3 for bypass mode.
+      In bypass mode the downstream port 3 is connected to the upstream port with low
+      switch resistance R_on.
+
+  clocks:
+    maxItems: 1
+    description: >
+      Clock used for driving REFCLK signal. If not provided the driver assumes
+      that clock signal is always available, its rate is specified by REF_SEL
+      pins and a value from the primary reference clock frequencies table is
+      used.
+
+  clock-names:
+    const: refclk
+
+  refclk-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Frequency of the REFCLK signal as defined by REF_SEL pins. If not
+      provided, driver will not set rate of the REFCLK signal and assume that a
+      value from the primary reference clock frequencies table is used.
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - smsc,usb3803
+    then:
+      properties:
+        bypass-gpios: false
+
+  - if:
+      required:
+        - bypass-gpios
+    then:
+      properties:
+        initial-mode:
+          enum: [1, 2, 3]
+    else:
+      properties:
+        initial-mode:
+          enum: [1, 2]
+
+additionalProperties: false
+
+examples:
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          usb-hub@8 {
+              compatible = "smsc,usb3503";
+              reg = <0x08>;
+              connect-gpios = <&gpx3 0 1>;
+              disabled-ports = <2 3>;
+              intn-gpios = <&gpx3 4 1>;
+              reset-gpios = <&gpx3 5 1>;
+              initial-mode = <1>;
+              clocks = <&clks 80>;
+              clock-names = "refclk";
+          };
+      };
+
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          usb-hub@8 {
+              compatible = "smsc,usb3803";
+              reg = <0x08>;
+              connect-gpios = <&gpx3 0 1>;
+              disabled-ports = <2 3>;
+              intn-gpios = <&gpx3 4 1>;
+              reset-gpios = <&gpx3 5 1>;
+              bypass-gpios = <&gpx3 6 1>;
+              initial-mode = <3>;
+              clocks = <&clks 80>;
+              clock-names = "refclk";
+          };
+      };
+
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      usb-hub {
+          /* I2C is not connected */
+          compatible = "smsc,usb3503";
+          initial-mode = <1>; /* initialize in HUB mode */
+          disabled-ports = <1>;
+          intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+          reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+          connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+          refclk-frequency = <19200000>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
new file mode 100644
index 0000000000..a696f23730
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -0,0 +1,434 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare USB3 Controller
+
+maintainers:
+  - Felipe Balbi <balbi@kernel.org>
+
+description:
+  This is usually a subnode to DWC3 glue to which it is connected, but can also
+  be presented as a standalone DT node with an optional vendor-specific
+  compatible string.
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - if:
+      properties:
+        dr_mode:
+          const: peripheral
+
+      required:
+        - dr_mode
+    then:
+      $ref: usb.yaml#
+    else:
+      $ref: usb-xhci.yaml#
+
+properties:
+  compatible:
+    contains:
+      oneOf:
+        - const: snps,dwc3
+        - const: synopsys,dwc3
+          deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      It's either a single common DWC3 interrupt (dwc_usb3) or individual
+      interrupts for the host, gadget and DRD modes.
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 4
+    oneOf:
+      - const: dwc_usb3
+      - items:
+          enum: [host, peripheral, otg, wakeup]
+
+  clocks:
+    description:
+      In general the core supports three types of clocks. bus_early is a
+      SoC Bus Clock (AHB/AXI/Native). ref generates ITP when the UTMI/ULPI
+      PHY is suspended. suspend clocks a small part of the USB3 core when
+      SS PHY in P3. But particular cases may differ from that having less
+      or more clock sources with another names.
+
+  clock-names:
+    contains:
+      anyOf:
+        - enum: [bus_early, ref, suspend]
+        - true
+
+  dma-coherent: true
+
+  extcon:
+    maxItems: 1
+    deprecated: true
+
+  iommus:
+    maxItems: 1
+
+  usb-phy:
+    minItems: 1
+    items:
+      - description: USB2/HS PHY
+      - description: USB3/SS PHY
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - usb2-phy
+        - usb3-phy
+
+  power-domains:
+    description:
+      The DWC3 has 2 power-domains. The power management unit (PMU) and
+      everything else. The PMU is typically always powered and may not have an
+      entry.
+    minItems: 1
+    items:
+      - description: Core
+      - description: Power management unit
+
+  resets:
+    minItems: 1
+
+  snps,usb2-lpm-disable:
+    description: Indicate if we don't want to enable USB2 HW LPM for host
+      mode.
+    type: boolean
+
+  snps,usb3_lpm_capable:
+    description: Determines if platform is USB3 LPM capable
+    type: boolean
+
+  snps,usb2-gadget-lpm-disable:
+    description: Indicate if we don't want to enable USB2 HW LPM for gadget
+      mode.
+    type: boolean
+
+  snps,dis-start-transfer-quirk:
+    description:
+      When set, disable isoc START TRANSFER command failure SW work-around
+      for DWC_usb31 version 1.70a-ea06 and prior.
+    type: boolean
+
+  snps,disable_scramble_quirk:
+    description:
+      True when SW should disable data scrambling. Only really useful for FPGA
+      builds.
+    type: boolean
+
+  snps,has-lpm-erratum:
+    description: True when DWC3 was configured with LPM Erratum enabled
+    type: boolean
+
+  snps,lpm-nyet-threshold:
+    description: LPM NYET threshold
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  snps,u2exit_lfps_quirk:
+    description: Set if we want to enable u2exit lfps quirk
+    type: boolean
+
+  snps,u2ss_inp3_quirk:
+    description: Set if we enable P3 OK for U2/SS Inactive quirk
+    type: boolean
+
+  snps,req_p1p2p3_quirk:
+    description:
+      When set, the core will always request for P1/P2/P3 transition sequence.
+    type: boolean
+
+  snps,del_p1p2p3_quirk:
+    description:
+      When set core will delay P1/P2/P3 until a certain amount of 8B10B errors
+      occur.
+    type: boolean
+
+  snps,del_phy_power_chg_quirk:
+    description: When set core will delay PHY power change from P0 to P1/P2/P3.
+    type: boolean
+
+  snps,lfps_filter_quirk:
+    description: When set core will filter LFPS reception.
+    type: boolean
+
+  snps,rx_detect_poll_quirk:
+    description:
+      when set core will disable a 400us delay to start Polling LFPS after
+      RX.Detect.
+    type: boolean
+
+  snps,tx_de_emphasis_quirk:
+    description: When set core will set Tx de-emphasis value
+    type: boolean
+
+  snps,tx_de_emphasis:
+    description:
+      The value driven to the PHY is controlled by the LTSSM during USB3
+      Compliance mode.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum:
+      - 0 # -6dB de-emphasis
+      - 1 # -3.5dB de-emphasis
+      - 2 # No de-emphasis
+
+  snps,dis_u3_susphy_quirk:
+    description: When set core will disable USB3 suspend phy
+    type: boolean
+
+  snps,dis_u2_susphy_quirk:
+    description: When set core will disable USB2 suspend phy
+    type: boolean
+
+  snps,dis_enblslpm_quirk:
+    description:
+      When set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal
+      to the PHY.
+    type: boolean
+
+  snps,dis-u1-entry-quirk:
+    description: Set if link entering into U1 needs to be disabled
+    type: boolean
+
+  snps,dis-u2-entry-quirk:
+    description: Set if link entering into U2 needs to be disabled
+    type: boolean
+
+  snps,dis_rxdet_inp3_quirk:
+    description:
+      When set core will disable receiver detection in PHY P3 power state.
+    type: boolean
+
+  snps,dis-u2-freeclk-exists-quirk:
+    description:
+      When set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2
+      PHY doesn't provide a free-running PHY clock.
+    type: boolean
+
+  snps,dis-del-phy-power-chg-quirk:
+    description:
+      When set core will change PHY power from P0 to P1/P2/P3 without delay.
+    type: boolean
+
+  snps,dis-tx-ipgap-linecheck-quirk:
+    description: When set, disable u2mac linestate check during HS transmit
+    type: boolean
+
+  snps,parkmode-disable-ss-quirk:
+    description:
+      When set, all SuperSpeed bus instances in park mode are disabled.
+    type: boolean
+
+  snps,parkmode-disable-hs-quirk:
+    description:
+      When set, all HighSpeed bus instances in park mode are disabled.
+    type: boolean
+
+  snps,dis_metastability_quirk:
+    description:
+      When set, disable metastability workaround. CAUTION! Use only if you are
+      absolutely sure of it.
+    type: boolean
+
+  snps,dis-split-quirk:
+    description:
+      When set, change the way URBs are handled by the driver. Needed to
+      avoid -EPROTO errors with usbhid on some devices (Hikey 970).
+    type: boolean
+
+  snps,gfladj-refclk-lpm-sel-quirk:
+    description:
+      When set, run the SOF/ITP counter based on ref_clk.
+    type: boolean
+
+  snps,resume-hs-terminations:
+    description:
+      Fix the issue of HS terminations CRC error on resume by enabling this
+      quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end
+      of resume. This option is to support certain legacy ULPI PHYs.
+    type: boolean
+
+  snps,ulpi-ext-vbus-drv:
+    description:
+      Some ULPI USB PHY does not support internal VBUS supply, and driving
+      the CPEN pin, requires the configuration of the ulpi DRVVBUSEXTERNAL
+      bit. When set, the xhci host will configure the USB2 PHY drives VBUS
+      with an external supply.
+    type: boolean
+
+  snps,is-utmi-l1-suspend:
+    description:
+      True when DWC3 asserts output signal utmi_l1_suspend_n, false when
+      asserts utmi_sleep_n.
+    type: boolean
+
+  snps,hird-threshold:
+    description: HIRD threshold
+    $ref: /schemas/types.yaml#/definitions/uint8
+
+  snps,hsphy_interface:
+    description:
+      High-Speed PHY interface selection between UTMI+ and ULPI when the
+      DWC_USB3_HSPHY_INTERFACE has value 3.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, ulpi]
+
+  snps,quirk-frame-length-adjustment:
+    description:
+      Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame
+      length adjustment when the fladj_30mhz_sdbnd signal is invalid or
+      incorrect.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x3f
+
+  snps,ref-clock-period-ns:
+    description:
+      Value for REFCLKPER field of GUCTL register for reference clock period in
+      nanoseconds, when the hardware set default does not match the actual
+      clock.
+
+      This binding is deprecated. Instead, provide an appropriate reference clock.
+    minimum: 8
+    maximum: 62
+    deprecated: true
+
+  snps,rx-thr-num-pkt-prd:
+    description:
+      Periodic ESS RX packet threshold count (host mode only). Set this and
+      snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.4) to enable periodic ESS RX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,rx-max-burst-prd:
+    description:
+      Max periodic ESS RX burst size (host mode only). Set this and
+      snps,rx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.4) to enable periodic ESS RX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-thr-num-pkt-prd:
+    description:
+      Periodic ESS TX packet threshold count (host mode only). Set this and
+      snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.3) to enable periodic ESS TX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  snps,tx-max-burst-prd:
+    description:
+      Max periodic ESS TX burst size (host mode only). Set this and
+      snps,tx-thr-num-pkt-prd to a valid, non-zero value 1-16 (DWC_usb31
+      programming guide section 1.2.3) to enable periodic ESS TX threshold.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 1
+    maximum: 16
+
+  tx-fifo-resize:
+    description: Determines if the TX fifos can be dynamically resized depending
+      on the number of IN endpoints used and if bursting is supported.  This
+      may help improve bandwidth on platforms with higher system latencies, as
+      increased fifo space allows for the controller to prefetch data into its
+      internal memory.
+    type: boolean
+
+  tx-fifo-max-num:
+    description: Specifies the max number of packets the txfifo resizing logic
+      can account for when higher endpoint bursting is used. (bMaxBurst > 6) The
+      higher the number, the more fifo space the txfifo resizing logic will
+      allocate for that endpoint.
+    $ref: /schemas/types.yaml#/definitions/uint8
+    minimum: 3
+
+  snps,incr-burst-type-adjustment:
+    description:
+      Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
+      burst type enable and INCRx type. A single value means INCRX burst mode
+      enabled. If more than one value specified, undefined length INCR burst
+      type will be enabled with burst lengths utilized up to the maximum
+      of the values passed in this property.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    uniqueItems: true
+    items:
+      enum: [1, 4, 8, 16, 32, 64, 128, 256]
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      This port is used with the 'usb-role-switch' property  to connect the
+      dwc3 to type C connector.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Those ports should be used with any connector to the data bus of this
+      controller using the OF graph bindings specified if the "usb-role-switch"
+      property is used.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: High Speed (HS) data bus.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) data bus.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable USB remote wakeup.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    usb@4a030000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a030000 0xcfff>;
+      interrupts = <0 92 4>;
+      usb-phy = <&usb2_phy>, <&usb3_phy>;
+      snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+    };
+  - |
+    usb@4a000000 {
+      compatible = "snps,dwc3";
+      reg = <0x4a000000 0xcfff>;
+      interrupts = <0 92 4>;
+      clocks = <&clk 1>, <&clk 2>, <&clk 3>;
+      clock-names = "bus_early", "ref", "suspend";
+      phys = <&usb2_phy>, <&usb3_phy>;
+      phy-names = "usb2-phy", "usb3-phy";
+      snps,dis_u2_susphy_quirk;
+      snps,dis_enblslpm_quirk;
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
new file mode 100644
index 0000000000..acda2f47fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,stusb160x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STUSB160x Type-C controller
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stusb1600
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: main power supply (4.1V-22V)
+
+  vsys-supply:
+    description: low power supply (3.0V-5.5V)
+
+  vconn-supply:
+    description: power supply (2.7V-5.5V) used to supply VConn on CC pin in
+      source or dual power role
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      typec-power-opmode: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec: stusb1600@28 {
+            compatible = "st,stusb1600";
+            reg = <0x28>;
+            vdd-supply = <&vbus_drd>;
+            vsys-supply = <&vdd_usb>;
+            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpioi>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                power-role = "dual";
+                data-role = "dual";
+                typec-power-opmode = "default";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
new file mode 100644
index 0000000000..1cb68cabe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32G0 USB Type-C PD controller
+
+description: |
+  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
+  typically using the UCSI protocol over I2C, with a dedicated alert
+  (interrupt) pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32g0-typec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  wakeup-source: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      typec@53 {
+        compatible = "st,stm32g0-typec";
+        reg = <0x53>;
+        /* Alert pin on GPIO PE12 */
+        interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpioe>;
+
+        /* Example with one type-C connector */
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+              reg = <0>;
+              con_usb_c_ep: endpoint {
+                remote-endpoint = <&usb_ep>;
+              };
+            };
+          };
+        };
+      };
+    };
+
+    usb {
+      usb-role-switch;
+      port {
+        usb_ep: endpoint {
+          remote-endpoint = <&con_usb_c_ep>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
new file mode 100644
index 0000000000..24aa9c10d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/starfive,jh7110-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 wrapper module for the Cadence USBSS-DRD controller
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-usb
+
+  ranges: true
+
+  starfive,stg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller stg_syscon node.
+          - description: dr mode register offset of STG_SYSCONSAIF__SYSCFG register for USB.
+    description:
+      The phandle to System Register Controller syscon node and the offset
+      of STG_SYSCONSAIF__SYSCFG register for USB.
+
+  dr_mode:
+    enum: [host, otg, peripheral]
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+  clocks:
+    items:
+      - description: link power management clock
+      - description: standby clock
+      - description: APB clock
+      - description: AXI clock
+      - description: UTMI APB clock
+
+  clock-names:
+    items:
+      - const: lpm
+      - const: stb
+      - const: apb
+      - const: axi
+      - const: utmi_apb
+
+  resets:
+    items:
+      - description: Power up reset
+      - description: APB clock reset
+      - description: AXI clock reset
+      - description: UTMI APB clock reset
+
+  reset-names:
+    items:
+      - const: pwrup
+      - const: apb
+      - const: axi
+      - const: utmi_apb
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: cdns,usb3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - ranges
+  - starfive,stg-syscon
+  - '#address-cells'
+  - '#size-cells'
+  - dr_mode
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    usb@10100000 {
+        compatible = "starfive,jh7110-usb";
+        ranges = <0x0 0x10100000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        starfive,stg-syscon = <&stg_syscon 0x4>;
+        clocks = <&syscrg 4>,
+                 <&stgcrg 5>,
+                 <&stgcrg 1>,
+                 <&stgcrg 3>,
+                 <&stgcrg 2>;
+        clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+        resets = <&stgcrg 10>,
+                 <&stgcrg 8>,
+                 <&stgcrg 7>,
+                 <&stgcrg 9>;
+        reset-names = "pwrup", "apb", "axi", "utmi_apb";
+        dr_mode = "host";
+
+        usb@0 {
+            compatible = "cdns,usb3";
+            reg = <0x0 0x10000>,
+                  <0x10000 0x10000>,
+                  <0x20000 0x10000>;
+            reg-names = "otg", "xhci", "dev";
+            interrupts = <100>, <108>, <110>;
+            interrupt-names = "host", "peripheral", "otg";
+            maximum-speed = "super-speed";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
new file mode 100644
index 0000000000..fec5651f56
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    const: ti,am62-usb
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  power-domains:
+    description:
+      PM domain provider node and an args specifier containing
+      the USB ISO device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+    maxItems: 1
+
+  clocks:
+    description: Clock phandle to usb2_refclk
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  ti,vbus-divider:
+    description:
+      Should be present if USB VBUS line is connected to the
+      VBUS pin of the SoC via a 1/3 voltage divider.
+    type: boolean
+
+  ti,syscon-phy-pll-refclk:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: USB phy control register offset within SYSCON
+    description:
+      Specifier for conveying frequency of ref clock input, for the
+      operation of USB2PHY.
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+  - ti,syscon-phy-pll-refclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbss1: usb@f910000 {
+        compatible = "ti,am62-usb";
+        reg = <0x00 0x0f910000 0x00 0x800>;
+        clocks = <&k3_clks 162 3>;
+        clock-names = "ref";
+        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+        power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@31100000 {
+          compatible = "snps,dwc3";
+          reg = <0x00 0x31100000 0x00 0x50000>;
+          interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+                       <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+          interrupt-names = "host", "peripheral";
+          maximum-speed = "high-speed";
+          dr_mode = "otg";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
new file mode 100644
index 0000000000..54c6586cb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,hd3ss3220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HD3SS3220 TypeC DRP Port Controller
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |-
+  HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel
+  Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The
+  HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a
+  Dual Role Port (DRP) making it ideal for any application.
+
+properties:
+  compatible:
+    const: ti,hd3ss3220
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: OF graph bindings (specified in bindings/graph.txt) that model
+      SS data bus to the SS capable connector.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) MUX inputs connected to SS capable connector.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of 2:1 MUX connected to Super Speed (SS) data bus.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hd3ss3220@47 {
+                compatible = "ti,hd3ss3220";
+                reg = <0x47>;
+                interrupt-parent = <&gpio6>;
+                interrupts = <3>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        port@0 {
+                                reg = <0>;
+                                hd3ss3220_in_ep: endpoint {
+                                        remote-endpoint = <&ss_ep>;
+                                };
+                        };
+                        port@1 {
+                                reg = <1>;
+                                hd3ss3220_out_ep: endpoint {
+                                        remote-endpoint = <&usb3_role_switch>;
+                                };
+                        };
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
new file mode 100644
index 0000000000..95ff9791ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,j721e-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI wrapper module for the Cadence USBSS-DRD controller
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,j721e-usb
+      - const: ti,am64-usb
+      - items:
+          - const: ti,j721e-usb
+          - const: ti,am64-usb
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  power-domains:
+    description:
+      PM domain provider node and an args specifier containing
+      the USB device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+    maxItems: 1
+
+  clocks:
+    description: Clock phandles to usb2_refclk and lpm_clk
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: lpm
+
+  ti,usb2-only:
+    description:
+      If present, it restricts the controller to USB2.0 mode of
+      operation. Must be present if USB3 PHY is not available
+      for USB.
+    type: boolean
+
+  ti,vbus-divider:
+    description:
+      Should be present if USB VBUS line is connected to the
+      VBUS pin of the SoC via a 1/3 voltage divider.
+    type: boolean
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  dma-coherent: true
+
+patternProperties:
+  "^usb@":
+    type: object
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cdns_usb@4104000 {
+            compatible = "ti,j721e-usb";
+            reg = <0x00 0x4104000 0x00 0x100>;
+            power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+            clock-names = "ref", "lpm";
+            assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+            assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            usb@6000000 {
+                  compatible = "cdns,usb3";
+                  reg = <0x00 0x6000000 0x00 0x10000>,
+                        <0x00 0x6010000 0x00 0x10000>,
+                        <0x00 0x6020000 0x00 0x10000>;
+                  reg-names = "otg", "xhci", "dev";
+                  interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+                               <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+                               <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+                  interrupt-names = "host",
+                                    "peripheral",
+                                    "otg";
+                  maximum-speed = "super-speed";
+                  dr_mode = "otg";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
new file mode 100644
index 0000000000..9252d893f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Keystone Soc USB Controller
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,keystone-dwc3
+          - ti,am654-dwc3
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+    description: Should contain a phandle to a PM domain provider node
+      and an args specifier containing the USB device id
+      value. This property is as per the binding,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+  phys:
+    maxItems: 1
+    description:
+      PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY
+      to be turned on before the controller.
+      Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+  phy-names:
+    items:
+      - const: usb3-phy
+
+  dma-coherent: true
+
+  dma-ranges: true
+
+patternProperties:
+  "usb@[a-f0-9]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dwc3@2680000 {
+      compatible = "ti,keystone-dwc3";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      reg = <0x2680000 0x10000>;
+      clocks = <&clkusb>;
+      interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+      ranges;
+
+      usb@2690000 {
+        compatible = "snps,dwc3";
+        reg = <0x2690000 0x70000>;
+        interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+        usb-phy = <&usb_phy>, <&usb_phy>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
new file mode 100644
index 0000000000..5497a60cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,tps6598x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  Texas Instruments 6598x Type-C Port Switch and Power Delivery controller
+
+  A variant of this controller known as Apple CD321x or Apple ACE is also
+  present on hardware with Apple SoCs such as the M1.
+
+properties:
+  compatible:
+    enum:
+      - ti,tps6598x
+      - apple,cd321x
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: irq
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps6598x: tps6598x@38 {
+            compatible = "ti,tps6598x";
+            reg = <0x38>;
+            wakeup-source;
+
+            interrupt-parent = <&msmgpio>;
+            interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "irq";
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&typec_pins>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                label = "USB-C";
+                port {
+                    typec_ep: endpoint {
+                        remote-endpoint = <&otg_ep>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
new file mode 100644
index 0000000000..c2e29bd61e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI USB8041 USB 3.0 hub controller
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8140
+      - usb451,8142
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8142";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8140";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
new file mode 100644
index 0000000000..17327a2961
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -0,0 +1,43 @@
+USB COMPARATOR OF TWL CHIPS
+
+TWL6030 USB COMPARATOR
+ - compatible : Should be "ti,twl6030-usb"
+ - interrupts : Two interrupt numbers to the cpu should be specified. First
+   interrupt number is the otg interrupt number that raises ID interrupts when
+   the controller has to act as host and the second interrupt number is the
+   usb interrupt number that raises VBUS interrupts when the controller has to
+   act as device
+ - usb-supply : phandle to the regulator device tree node. It should be vusb
+   if it is twl6030 or ldousb if it is twl6032 subclass.
+
+twl6030-usb {
+	compatible = "ti,twl6030-usb";
+	interrupts = < 4 10 >;
+};
+
+Board specific device node entry
+&twl6030-usb {
+	usb-supply = <&vusb>;
+};
+
+TWL4030 USB PHY AND COMPARATOR
+ - compatible : Should be "ti,twl4030-usb"
+ - interrupts : The interrupt numbers to the cpu should be specified. First
+   interrupt number is the otg interrupt number that raises ID interrupts
+   and VBUS interrupts. The second interrupt number is optional.
+ - <supply-name>-supply : phandle to the regulator device tree node.
+   <supply-name> should be vusb1v5, vusb1v8 and vusb3v1
+ - usb_mode : The mode used by the phy to connect to the controller. "1"
+   specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
+
+If a sibling node is compatible "ti,twl4030-bci", then it will find
+this device and query it for USB power status.
+
+twl4030-usb {
+	compatible = "ti,twl4030-usb";
+	interrupts = < 10 4 >;
+	usb1v5-supply = <&vusb1v5>;
+	usb1v8-supply = <&vusb1v8>;
+	usb3v1-supply = <&vusb3v1>;
+	usb_mode = <1>;
+};
diff --git a/Documentation/devicetree/bindings/usb/ulpi.txt b/Documentation/devicetree/bindings/usb/ulpi.txt
new file mode 100644
index 0000000000..ca179dc4bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ulpi.txt
@@ -0,0 +1,20 @@
+ULPI bus binding
+----------------
+
+Phys that are behind a ULPI connection can be described with the following
+binding. The host controller shall have a "ulpi" named node as a child, and
+that node shall have one enabled node underneath it representing the ulpi
+device on the bus.
+
+EXAMPLE
+-------
+
+usb {
+	compatible = "vendor,usb-controller";
+
+	ulpi {
+		phy {
+			compatible = "vendor,phy";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml
new file mode 100644
index 0000000000..da890ee60c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-device.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB Device
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |
+  Usually, we only use device tree for hard wired USB device.
+  The reference binding doc is from:
+  http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
+
+  Four types of device-tree nodes are defined: "host-controller nodes"
+  representing USB host controllers, "device nodes" representing USB devices,
+  "interface nodes" representing USB interfaces and "combined nodes"
+  representing simple USB devices.
+
+  A combined node shall be used instead of a device node and an interface node
+  for devices of class 0 or 9 (hub) with a single configuration and a single
+  interface.
+
+  A "hub node" is a combined node or an interface node that represents a USB
+  hub.
+
+properties:
+  compatible:
+    pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
+    description: Device nodes or combined nodes.
+      "usbVID,PID", where VID is the vendor id and PID the product id.
+      The textual representation of VID and PID shall be in lower case
+      hexadecimal with leading zeroes suppressed. The other compatible
+      strings from the above standard binding could also be used,
+      but a device adhering to this binding may leave out all except
+      for "usbVID,PID".
+
+  reg:
+    description: the number of the USB hub port or the USB host-controller
+      port to which this device is attached. The range is 1-255.
+    maxItems: 1
+
+  "#address-cells":
+    description: should be 1 for hub nodes with device nodes,
+      should be 2 for device nodes with interface nodes.
+    enum: [1, 2]
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$":
+    type: object
+    description: USB interface nodes.
+      The configuration component is not included in the textual
+      representation of an interface-node unit address for configuration 1.
+
+    properties:
+      compatible:
+        pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$"
+        description: Interface nodes.
+          "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
+          the product id, CN is the configuration value and IN is the interface
+          number. The textual representation of VID, PID, CN and IN shall be
+          in lower case hexadecimal with leading zeroes suppressed.
+          The other compatible strings from the above standard binding could
+          also be used, but a device adhering to this binding may leave out
+          all except for "usbifVID,PID.configCN.IN".
+
+      reg:
+        description: should be 2 cells long, the first cell represents
+          the interface number and the second cell represents the
+          configuration value.
+        maxItems: 1
+
+required:
+  - reg
+
+additionalProperties: true
+
+examples:
+  # hub connected to port 1
+  # device connected to port 2
+  # device connected to port 3
+  #    interface 0 of configuration 1
+  #    interface 0 of configuration 2
+  - |
+    usb@11270000 {
+        reg = <0x11270000 0x1000>;
+        interrupts = <0x0 0x4e 0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+        };
+
+        device@2 {
+            compatible = "usb123,4567";
+            reg = <2>;
+        };
+
+        device@3 {
+            compatible = "usb123,abcd";
+            reg = <3>;
+
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            interface@0 {
+                compatible = "usbif123,abcd.config1.0";
+                reg = <0 1>;
+            };
+
+            interface@0,2 {
+                compatible = "usbif123,abcd.config2.0";
+                reg = <0 2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb-drd.yaml b/Documentation/devicetree/bindings/usb/usb-drd.yaml
new file mode 100644
index 0000000000..114fb5dc04
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-drd.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-drd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB OTG Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  otg-rev:
+    description:
+      Tells usb driver the release number of the OTG and EH supplement with
+      which the device and its descriptors are compliant, in binary-coded
+      decimal (i.e. 2.0 is 0200H). This property is used if any real OTG
+      features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be
+      0x0200 or above.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0x0100, 0x0120, 0x0130, 0x0200]
+
+  dr_mode:
+    description:
+      Tells Dual-Role USB controllers that we want to work on a particular
+      mode. In case this attribute isn't passed via DT, USB DRD controllers
+      should default to OTG.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral, otg]
+    default: otg
+
+  hnp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG HNP. Normally HNP is the
+      basic function of real OTG except you want it to be a srp-capable only B
+      device.
+    type: boolean
+
+  srp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG
+      device.
+    type: boolean
+
+  adp-disable:
+    description:
+      Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG
+      device.
+    type: boolean
+
+  usb-role-switch:
+    description:
+      Indicates that the device is capable of assigning the USB data role
+      (USB host or USB device) for a given USB connector, such as Type-C,
+      Type-B(micro). See connector/usb-connector.yaml.
+
+  role-switch-default-mode:
+    description:
+      Indicates if usb-role-switch is enabled, the device default operation
+      mode of controller while usb role is USB_ROLE_NONE.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [host, peripheral]
+    default: peripheral
+
+additionalProperties: true
+
+examples:
+  - |
+    usb@4a030000 {
+        compatible = "snps,dwc3";
+        reg = <0x4a030000 0xcfff>;
+        interrupts = <0 92 4>;
+        usb-phy = <&usb2_phy>, <&usb3_phy>;
+        maximum-speed = "super-speed";
+        dr_mode = "otg";
+        phy_type = "utmi_wide";
+        otg-rev = <0x0200>;
+        adp-disable;
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
new file mode 100644
index 0000000000..692dd60e3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-hcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB Host Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+allOf:
+  - $ref: usb.yaml#
+
+properties:
+  companion:
+    description: Phandle of a companion device
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  tpl-support:
+    description:
+      Indicates if the Targeted Peripheral List is supported for given
+      targeted hosts (non-PC hosts).
+    type: boolean
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f]{1,2}$":
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+
+additionalProperties: true
+
+examples:
+  - |
+    usb {
+        phys = <&usb2_phy1>, <&usb3_phy1>;
+        phy-names = "usb";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
new file mode 100644
index 0000000000..6734f4d3aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-nop-xceiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB NOP PHY
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: usb-nop-xceiv
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: main_clk
+
+  clock-frequency: true
+
+  '#phy-cells':
+    const: 0
+
+  vcc-supply:
+    description: phandle to the regulator that provides power to the PHY.
+
+  power-domains:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vbus-detect-gpio:
+    description: Should specify the GPIO detecting a VBus insertion
+    maxItems: 1
+
+  vbus-regulator:
+    description: Should specify the regulator supplying current drawn from
+      the VBus line.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  wakeup-source:
+    description:
+      Specify if the USB phy can detect the remote wakeup signal
+      while the system sleep.
+
+required:
+  - compatible
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    hsusb1_phy {
+        compatible = "usb-nop-xceiv";
+        clock-frequency = <19200000>;
+        clocks = <&osc 0>;
+        clock-names = "main_clk";
+        vcc-supply = <&hsusb1_vcc_regulator>;
+        reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+        vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+        vbus-regulator = <&vbus_regulator>;
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt
new file mode 100644
index 0000000000..d1702eb2c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
@@ -0,0 +1,18 @@
+Generic Platform UHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "generic-uhci" (deprecated: "platform-uhci")
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UHCI controller interrupt
+
+additionally the properties from usb-hcd.yaml (in the current directory) are
+supported.
+
+Example:
+
+	uhci@d8007b00 {
+		compatible = "generic-uhci";
+		reg = <0xd8007b00 0x200>;
+		interrupts = <43>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
new file mode 100644
index 0000000000..180a261c3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-xhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB xHCI Controller
+
+maintainers:
+  - Mathias Nyman <mathias.nyman@intel.com>
+
+allOf:
+  - $ref: usb-hcd.yaml#
+
+properties:
+  usb2-lpm-disable:
+    description: Indicates if we don't want to enable USB2 HW LPM
+    type: boolean
+
+  usb3-lpm-capable:
+    description: Determines if platform is USB3 LPM capable
+    type: boolean
+
+  quirk-broken-port-ped:
+    description: Set if the controller has broken port disable mechanism
+    type: boolean
+
+  imod-interval-ns:
+    description: Interrupt moderation interval
+    default: 5000
+
+additionalProperties: true
+
+examples:
+  - |
+    usb@f0930000 {
+      compatible = "generic-xhci";
+      reg = <0xf0930000 0x8c8>;
+      interrupts = <0x0 0x4e 0x0>;
+      usb2-lpm-disable;
+      usb3-lpm-capable;
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml
new file mode 100644
index 0000000000..326b14f05d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic USB Controller
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^usb(@.*)?"
+
+  phys:
+    description:
+      List of all the USB PHYs on this HCD
+
+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      List of all the USB PHYs on this HCD to be accepted by the legacy USB
+      Physical Layer subsystem.
+    deprecated: true
+
+  phy_type:
+    description:
+      Tells USB controllers that we want to configure the core to support a
+      UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected, UTMI+ low
+      pin interface if ULPI is specified, Serial core/PHY interconnect if
+      serial is specified and High-Speed Inter-Chip feature if HSIC is
+      selected. In case this isn't passed via DT, USB controllers should
+      default to HW capability.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [utmi, utmi_wide, ulpi, serial, hsic]
+
+  maximum-speed:
+    description:
+      Tells USB controllers we want to work up to a certain speed. In case this
+      isn't passed via DT, USB controllers should default to their maximum HW
+      capability.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - low-speed
+      - full-speed
+      - high-speed
+      - super-speed
+      - super-speed-plus
+      - super-speed-plus-gen2x1
+      - super-speed-plus-gen1x2
+      - super-speed-plus-gen2x2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml
new file mode 100644
index 0000000000..ac5b997103
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml
@@ -0,0 +1,271 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb251xb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB 2.0 Hi-Speed Hub Controller
+
+maintainers:
+  - Richard Leitner <richard.leitner@skidata.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,usb2422
+      - microchip,usb2512b
+      - microchip,usb2512bi
+      - microchip,usb2513b
+      - microchip,usb2513bi
+      - microchip,usb2514b
+      - microchip,usb2514bi
+      - microchip,usb2517
+      - microchip,usb2517i
+      - microchip,usb251xb
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: |
+      Should specify the gpio for hub reset
+
+  vdd-supply:
+    description: |
+      Should specify the phandle to the regulator supplying vdd
+
+  skip-config:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Skip Hub configuration, but only send the USB-Attach command
+
+  vendor-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0x0424
+    description: |
+      Set USB Vendor ID of the hub
+
+  product-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description: |
+      Set USB Product ID of the hub
+
+  device-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0x0bb3
+    description: |
+      Set USB Device ID of the hub
+
+  language-id:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    default: 0x0000
+    description: |
+      Set USB Language ID
+
+  manufacturer:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Set USB Manufacturer string (max 31 characters long)
+
+  product:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Set USB Product string (max 31 characters long)
+
+  serial:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Set USB Serial string (max 31 characters long)
+
+  bus-powered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between self- and bus-powered operation
+      (boolean, default is self-powered)
+
+  self-powered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between self- and bus-powered operation
+      (boolean, default is self-powered)
+
+  disable-hi-speed:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      disable USB Hi-Speed support (boolean)
+
+  multi-tt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between multi- and single-transaction-translator
+      (boolean, default is multi-tt)
+
+  single-tt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      selects between multi- and single-transaction-translator
+      (boolean, default is multi-tt)
+
+  disable-eop:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      disable End of Packet generation in full-speed mode (boolean)
+
+  ganged-sensing:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select over-current sense type in self-powered mode
+      (boolean, default is individual)
+
+  individual-sensing:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select over-current sense type in self-powered mode
+      (boolean, default is individual)
+
+  ganged-port-switching:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select port power switching mode (boolean, default is individual)
+
+  individual-port-switching:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      select port power switching mode (boolean, default is individual)
+
+  dynamic-power-switching:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      enable auto-switching from self- to bus-powered operation if the
+      local power source is removed or unavailable (boolean)
+
+  oc-delay-us:
+    enum: [100, 4000, 8000, 16000]
+    default: 8000
+    description: |
+      Delay time (in microseconds) for filtering the over-current sense
+      inputs. If an invalid value is given, the default is used instead.
+
+  compound-device:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      indicate the hub is part of a compound device (boolean)
+
+  port-mapping-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      enable port mapping mode (boolean)
+
+  led-usb-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      led usb/speed indication mode selection (boolean, default is speed mode)
+
+  led-speed-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      led usb/speed indication mode selection (boolean, default is speed mode)
+
+  string-support:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      enable string descriptor support (required for manufacturer, product
+      and serial string configuration)
+
+  non-removable-ports:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Should specify the ports which have a non-removable device connected.
+
+  sp-disabled-ports:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Specifies the ports which will be self-power disabled
+
+  bp-disabled-ports:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Specifies the ports which will be bus-power disabled
+
+  sp-max-total-current-microamp:
+    maximum: 100000
+    default: 1000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry including a permanently
+      attached peripheral.
+
+  bp-max-total-current-microamp:
+    maximum: 510000
+    default: 100000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry including a permanently
+      attached peripheral.
+
+  sp-max-removable-current-microamp:
+    maximum: 100000
+    default: 1000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry excluding a permanently
+      attached peripheral.
+
+  bp-max-removable-current-microamp:
+    maximum: 510000
+    default: 100000
+    description: |
+      Specifies max current consumed by the hub from VBUS when
+      operating in self-powered hub. It includes the hub silicon
+      along with all associated circuitry excluding a permanently
+      attached peripheral.
+
+  power-on-time-ms:
+    maximum: 510
+    default: 100
+    description: |
+      Specifies the time it takes from the time the host initiates the
+      power-on sequence to a port until the port has adequate power.
+
+  swap-dx-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Specifies the ports which will swap the differential-pair (D+/D-),
+      default is not-swapped.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usb-hub@2c {
+        compatible = "microchip,usb2512b";
+        reg = <0x2c>;
+        reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+      };
+
+      usb-hub@2d {
+        compatible = "microchip,usb2514b";
+        reg = <0x2d>;
+        vendor-id = /bits/ 16 <0x0000>;
+        product-id = /bits/ 16 <0x0000>;
+        string-support;
+        manufacturer = "Foo";
+        product = "Foo-Bar";
+        serial = "1234567890A";
+        /* correct misplaced usb connectors on port 1,2 */
+        swap-dx-lanes = <1 2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb4604.txt b/Documentation/devicetree/bindings/usb/usb4604.txt
new file mode 100644
index 0000000000..82506d1771
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb4604.txt
@@ -0,0 +1,19 @@
+SMSC USB4604 High-Speed Hub Controller
+
+Required properties:
+- compatible: Should be "smsc,usb4604"
+
+Optional properties:
+- reg: Specifies the i2c slave address, it is required and should be 0x2d
+       if I2C is used.
+- reset-gpios: Should specify GPIO for reset.
+- initial-mode: Should specify initial mode.
+                (1 for HUB mode, 2 for STANDBY mode)
+
+Examples:
+	usb-hub@2d {
+		compatible = "smsc,usb4604";
+		reg = <0x2d>;
+		reset-gpios = <&gpx3 5 1>;
+		initial-mode = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt
new file mode 100644
index 0000000000..439a41c79a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -0,0 +1,50 @@
+Ux500 MUSB
+
+Required properties:
+ - compatible : Should be "stericsson,db8500-musb"
+ - reg        : Offset and length of registers
+ - interrupts : Interrupt; mode, number and trigger
+ - dr_mode    : Dual-role; either host mode "host", peripheral mode "peripheral"
+                or both "otg"
+
+Optional properties:
+ - dmas       : A list of dma channels;
+                dma-controller, event-line, fixed-channel, flags
+ - dma-names  : An ordered list of channel names affiliated to the above
+
+Example:
+
+usb_per5@a03e0000 {
+	compatible = "stericsson,db8500-musb";
+	reg = <0xa03e0000 0x10000>;
+	interrupts = <0 23 0x4>;
+	interrupt-names = "mc";
+
+	dr_mode = "otg";
+
+	dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+	       <&dma 38 0 0x0>, /* Logical - MemToDev */
+	       <&dma 37 0 0x2>, /* Logical - DevToMem */
+	       <&dma 37 0 0x0>, /* Logical - MemToDev */
+	       <&dma 36 0 0x2>, /* Logical - DevToMem */
+	       <&dma 36 0 0x0>, /* Logical - MemToDev */
+	       <&dma 19 0 0x2>, /* Logical - DevToMem */
+	       <&dma 19 0 0x0>, /* Logical - MemToDev */
+	       <&dma 18 0 0x2>, /* Logical - DevToMem */
+	       <&dma 18 0 0x0>, /* Logical - MemToDev */
+	       <&dma 17 0 0x2>, /* Logical - DevToMem */
+	       <&dma 17 0 0x0>, /* Logical - MemToDev */
+	       <&dma 16 0 0x2>, /* Logical - DevToMem */
+	       <&dma 16 0 0x0>, /* Logical - MemToDev */
+	       <&dma 39 0 0x2>, /* Logical - DevToMem */
+	       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+	dma-names = "iep_1_9",  "oep_1_9",
+		    "iep_2_10", "oep_2_10",
+		    "iep_3_11", "oep_3_11",
+		    "iep_4_12", "oep_4_12",
+		    "iep_5_13", "oep_5_13",
+		    "iep_6_14", "oep_6_14",
+		    "iep_7_15", "oep_7_15",
+		    "iep_8",    "oep_8";
+};
diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
new file mode 100644
index 0000000000..76db9071b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/vialab,vl817.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Via labs VL817 USB 3.1 hub controller
+
+maintainers:
+  - Anand Moon <linux.amoon@gmail.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb2109,2817
+      - usb2109,817
+
+  reg: true
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO controlling the RESET# pin.
+
+  vdd-supply:
+    description:
+      phandle to the regulator that provides power to the hub.
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb2109,2817";
+            reg = <1>;
+            vdd-supply = <&vcc_5v>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb2109,817";
+            reg = <2>;
+            vdd-supply = <&vcc_5v>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
new file mode 100644
index 0000000000..937670de01
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/willsemi,wusb3801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WUSB3801 Type-C port controller
+
+description:
+  The Will Semiconductor WUSB3801 is a USB Type-C port controller which
+  supports role and plug orientation detection using the CC pins. It is
+  compatible with the USB Type-C Cable and Connector Specification v1.2.
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+properties:
+  compatible:
+    enum:
+      - willsemi,wusb3801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    unevaluatedProperties: false
+    description:
+      The managed USB Type-C connector. Since WUSB3801 does not support
+      Power Delivery, the node should have the "pd-disable" property.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+    required:
+      - pd-disable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      tcpc@60 {
+        compatible = "willsemi,wusb3801";
+        reg = <0x60>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          vbus-supply = <&otg_switch>;
+          power-role = "dual";
+          try-power-role = "sink";
+          data-role = "dual";
+          typec-power-opmode = "default";
+          pd-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
new file mode 100644
index 0000000000..868dffe314
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/xlnx,usb2.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/xlnx,usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx udc controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,usb2-device-4.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,has-builtin-dma:
+    description:
+      If present, hardware has dma capability.
+    type: boolean
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    axi-usb2-device@42e00000 {
+        compatible = "xlnx,usb2-device-4.00.a";
+        interrupts = <0x0 0x39 0x1>;
+        reg = <0xee000000 0xc00>;
+        xlnx,has-builtin-dma;
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
new file mode 100644
index 0000000000..573578db95
--- /dev/null
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -0,0 +1,1606 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/vendor-prefixes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devicetree Vendor Prefix Registry
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+select: true
+
+properties: {}
+
+patternProperties:
+  # Prefixes which are not vendors, but followed the pattern
+  # DO NOT ADD NEW PROPERTIES TO THIS LIST
+  "^(at25|bm|devbus|dmacap|dsa|exynos|fsi[ab]|gpio-fan|gpio-key|gpio|gpmc|hdmi|i2c-gpio),.*": true
+  "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
+  "^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
+  "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
+  "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
+
+  # Keep list in alphabetical order.
+  "^100ask,.*":
+    description: Baiwen.com (100ask).
+  "^70mai,.*":
+    description: 70mai Co., Ltd.
+  "^8dev,.*":
+    description: 8devices, UAB
+  "^abb,.*":
+    description: ABB
+  "^abilis,.*":
+    description: Abilis Systems
+  "^abracon,.*":
+    description: Abracon Corporation
+  "^abt,.*":
+    description: ShenZhen Asia Better Technology Ltd.
+  "^acbel,.*":
+    description: Acbel Polytech Inc.
+  "^acer,.*":
+    description: Acer Inc.
+  "^acme,.*":
+    description: Acme Systems srl
+  "^actions,.*":
+    description: Actions Semiconductor Co., Ltd.
+  "^active-semi,.*":
+    description: Active-Semi International Inc
+  "^ad,.*":
+    description: Avionic Design GmbH
+  "^adafruit,.*":
+    description: Adafruit Industries, LLC
+  "^adapteva,.*":
+    description: Adapteva, Inc.
+  "^adaptrum,.*":
+    description: Adaptrum, Inc.
+  "^adh,.*":
+    description: AD Holdings Plc.
+  "^adi,.*":
+    description: Analog Devices, Inc.
+  "^advantech,.*":
+    description: Advantech Corporation
+  "^aeroflexgaisler,.*":
+    description: Aeroflex Gaisler AB
+  "^aesop,.*":
+    description: AESOP Embedded Forum
+  "^airoha,.*":
+    description: Airoha
+  "^al,.*":
+    description: Annapurna Labs
+  "^alcatel,.*":
+    description: Alcatel
+  "^aldec,.*":
+    description: Aldec, Inc.
+  "^alfa-network,.*":
+    description: ALFA Network Inc.
+  "^allegro,.*":
+    description: Allegro DVT
+  "^allo,.*":
+    description: Allo.com
+  "^allwinner,.*":
+    description: Allwinner Technology Co., Ltd.
+  "^alphascale,.*":
+    description: AlphaScale Integrated Circuits Systems, Inc.
+  "^alps,.*":
+    description: Alps Electric Co., Ltd.
+  "^alt,.*":
+    description: Altus-Escon-Company BV
+  "^altr,.*":
+    description: Altera Corp.
+  "^amarula,.*":
+    description: Amarula Solutions
+  "^amazon,.*":
+    description: Amazon.com, Inc.
+  "^amcc,.*":
+    description: Applied Micro Circuits Corporation (APM, formally AMCC)
+  "^amd,.*":
+    description: Advanced Micro Devices (AMD), Inc.
+  "^amediatech,.*":
+    description: Shenzhen Amediatech Technology Co., Ltd
+  "^amlogic,.*":
+    description: Amlogic, Inc.
+  "^ampere,.*":
+    description: Ampere Computing LLC
+  "^ampire,.*":
+    description: Ampire Co., Ltd.
+  "^ams,.*":
+    description: AMS AG
+  "^amstaos,.*":
+    description: AMS-Taos Inc.
+  "^analogix,.*":
+    description: Analogix Semiconductor, Inc.
+  "^anbernic,.*":
+    description: Anbernic
+  "^andestech,.*":
+    description: Andes Technology Corporation
+  "^anvo,.*":
+    description: Anvo-Systems Dresden GmbH
+  "^apm,.*":
+    description: Applied Micro Circuits Corporation (APM)
+  "^apple,.*":
+    description: Apple Inc.
+  "^aptina,.*":
+    description: Aptina Imaging
+  "^arasan,.*":
+    description: Arasan Chip Systems
+  "^archermind,.*":
+    description: ArcherMind Technology (Nanjing) Co., Ltd.
+  "^arctic,.*":
+    description: Arctic Sand
+  "^arcx,.*":
+    description: arcx Inc. / Archronix Inc.
+  "^aries,.*":
+    description: Aries Embedded GmbH
+  "^arm,.*":
+    description: ARM Ltd.
+  "^armadeus,.*":
+    description: ARMadeus Systems SARL
+  "^arrow,.*":
+    description: Arrow Electronics
+  "^artesyn,.*":
+    description: Artesyn Embedded Technologies Inc.
+  "^asahi-kasei,.*":
+    description: Asahi Kasei Corp.
+  "^asc,.*":
+    description: All Sensors Corporation
+  "^asix,.*":
+    description: ASIX Electronics Corporation
+  "^aspeed,.*":
+    description: ASPEED Technology Inc.
+  "^asrock,.*":
+    description: ASRock Inc.
+  "^asus,.*":
+    description: AsusTek Computer Inc.
+  "^atheros,.*":
+    description: Qualcomm Atheros, Inc. (deprecated, use qca)
+    deprecated: true
+  "^atlas,.*":
+    description: Atlas Scientific LLC
+  "^atmel,.*":
+    description: Atmel Corporation
+  "^auo,.*":
+    description: AU Optronics Corporation
+  "^auvidea,.*":
+    description: Auvidea GmbH
+  "^avago,.*":
+    description: Avago Technologies
+  "^avia,.*":
+    description: avia semiconductor
+  "^avic,.*":
+    description: Shanghai AVIC Optoelectronics Co., Ltd.
+  "^avnet,.*":
+    description: Avnet, Inc.
+  "^awinic,.*":
+    description: Shanghai Awinic Technology Co., Ltd.
+  "^axentia,.*":
+    description: Axentia Technologies AB
+  "^axis,.*":
+    description: Axis Communications AB
+  "^azoteq,.*":
+    description: Azoteq (Pty) Ltd
+  "^azw,.*":
+    description: Shenzhen AZW Technology Co., Ltd.
+  "^baikal,.*":
+    description: BAIKAL ELECTRONICS, JSC
+  "^bananapi,.*":
+    description: BIPAI KEJI LIMITED
+  "^beacon,.*":
+    description: Compass Electronics Group, LLC
+  "^beagle,.*":
+    description: BeagleBoard.org Foundation
+  "^belling,.*":
+    description: Shanghai Belling Co., Ltd.
+  "^bhf,.*":
+    description: Beckhoff Automation GmbH & Co. KG
+  "^bitmain,.*":
+    description: Bitmain Technologies
+  "^blutek,.*":
+    description: BluTek Power
+  "^boe,.*":
+    description: BOE Technology Group Co., Ltd.
+  "^bosch,.*":
+    description: Bosch Sensortec GmbH
+  "^boundary,.*":
+    description: Boundary Devices Inc.
+  "^brcm,.*":
+    description: Broadcom Corporation
+  "^broadmobi,.*":
+    description: Shanghai Broadmobi Communication Technology Co.,Ltd.
+  "^bsh,.*":
+    description: BSH Hausgeraete GmbH
+  "^bticino,.*":
+    description: Bticino International
+  "^buffalo,.*":
+    description: Buffalo, Inc.
+  "^bur,.*":
+    description: B&R Industrial Automation GmbH
+  "^bytedance,.*":
+    description: ByteDance Ltd.
+  "^calamp,.*":
+    description: CalAmp Corp.
+  "^calaosystems,.*":
+    description: CALAO Systems SAS
+  "^calxeda,.*":
+    description: Calxeda
+  "^canaan,.*":
+    description: Canaan, Inc.
+  "^caninos,.*":
+    description: Caninos Loucos Program
+  "^capella,.*":
+    description: Capella Microsystems, Inc
+  "^cascoda,.*":
+    description: Cascoda, Ltd.
+  "^catalyst,.*":
+    description: Catalyst Semiconductor, Inc.
+  "^cavium,.*":
+    description: Cavium, Inc.
+  "^cdns,.*":
+    description: Cadence Design Systems Inc.
+  "^cdtech,.*":
+    description: CDTech(H.K.) Electronics Limited
+  "^cellwise,.*":
+    description: CellWise Microelectronics Co., Ltd
+  "^ceva,.*":
+    description: Ceva, Inc.
+  "^chargebyte,.*":
+    description: chargebyte GmbH
+  "^checkpoint,.*":
+    description: Check Point Software Technologies Ltd.
+  "^chefree,.*":
+    description: Chefree Technology Corp.
+  "^chipidea,.*":
+    description: Chipidea, Inc
+  "^chipone,.*":
+    description: ChipOne
+  "^chipspark,.*":
+    description: ChipSPARK
+  "^chongzhou,.*":
+    description: Shenzhen Chongzhou Electronic Technology Co., Ltd
+  "^chrontel,.*":
+    description: Chrontel, Inc.
+  "^chrp,.*":
+    description: Common Hardware Reference Platform
+  "^chunghwa,.*":
+    description: Chunghwa Picture Tubes Ltd.
+  "^chuwi,.*":
+    description: Chuwi Innovation Ltd.
+  "^ciaa,.*":
+    description: Computadora Industrial Abierta Argentina
+  "^cirrus,.*":
+    description: Cirrus Logic, Inc.
+  "^cisco,.*":
+    description: Cisco Systems, Inc.
+  "^clockwork,.*":
+    description: Clockwork Tech LLC
+  "^cloos,.*":
+    description: Carl Cloos Schweisstechnik GmbH.
+  "^cloudengines,.*":
+    description: Cloud Engines, Inc.
+  "^cnm,.*":
+    description: Chips&Media, Inc.
+  "^cnxt,.*":
+    description: Conexant Systems, Inc.
+  "^colorfly,.*":
+    description: Colorful GRP, Shenzhen Xueyushi Technology Ltd.
+  "^compulab,.*":
+    description: CompuLab Ltd.
+  "^congatec,.*":
+    description: congatec GmbH
+  "^coreriver,.*":
+    description: CORERIVER Semiconductor Co.,Ltd.
+  "^corpro,.*":
+    description: Chengdu Corpro Technology Co., Ltd.
+  "^cortina,.*":
+    description: Cortina Systems, Inc.
+  "^cosmic,.*":
+    description: Cosmic Circuits
+  "^crane,.*":
+    description: Crane Connectivity Solutions
+  "^creative,.*":
+    description: Creative Technology Ltd
+  "^crystalfontz,.*":
+    description: Crystalfontz America, Inc.
+  "^csky,.*":
+    description: Hangzhou C-SKY Microsystems Co., Ltd
+  "^csq,.*":
+    description: Shenzen Chuangsiqi Technology Co.,Ltd.
+  "^ctera,.*":
+    description: CTERA Networks Intl.
+  "^ctu,.*":
+    description: Czech Technical University in Prague
+  "^cubietech,.*":
+    description: Cubietech, Ltd.
+  "^cui,.*":
+    description: CUI Devices
+  "^cypress,.*":
+    description: Cypress Semiconductor Corporation
+  "^cyx,.*":
+    description: Shenzhen CYX Industrial Co., Ltd
+  "^cznic,.*":
+    description: CZ.NIC, z.s.p.o.
+  "^dallas,.*":
+    description: Maxim Integrated Products (formerly Dallas Semiconductor)
+  "^dataimage,.*":
+    description: DataImage, Inc.
+  "^davicom,.*":
+    description: DAVICOM Semiconductor, Inc.
+  "^dell,.*":
+    description: Dell Inc.
+  "^delta,.*":
+    description: Delta Electronics, Inc.
+  "^densitron,.*":
+    description: Densitron Technologies Ltd
+  "^denx,.*":
+    description: Denx Software Engineering
+  "^devantech,.*":
+    description: Devantech, Ltd.
+  "^dfi,.*":
+    description: DFI Inc.
+  "^dh,.*":
+    description: DH electronics GmbH
+  "^difrnce,.*":
+    description: Shenzhen Yagu Electronic Technology Co., Ltd.
+  "^digi,.*":
+    description: Digi International Inc.
+  "^digilent,.*":
+    description: Diglent, Inc.
+  "^diodes,.*":
+    description: Diodes, Inc.
+  "^dioo,.*":
+    description: Dioo Microcircuit Co., Ltd
+  "^dlc,.*":
+    description: DLC Display Co., Ltd.
+  "^dlg,.*":
+    description: Dialog Semiconductor
+  "^dlink,.*":
+    description: D-Link Corporation
+  "^dmo,.*":
+    description: Data Modul AG
+  "^domintech,.*":
+    description: Domintech Co., Ltd.
+  "^dongwoon,.*":
+    description: Dongwoon Anatech
+  "^dptechnics,.*":
+    description: DPTechnics
+  "^dragino,.*":
+    description: Dragino Technology Co., Limited
+  "^ds,.*":
+    description: DaSheng, Inc.
+  "^dserve,.*":
+    description: dServe Technology B.V.
+  "^dynaimage,.*":
+    description: Dyna-Image
+  "^ea,.*":
+    description: Embedded Artists AB
+  "^ebang,.*":
+    description: Zhejiang Ebang Communication Co., Ltd
+  "^ebbg,.*":
+    description: EBBG
+  "^ebs-systart,.*":
+    description: EBS-SYSTART GmbH
+  "^ebv,.*":
+    description: EBV Elektronik
+  "^eckelmann,.*":
+    description: Eckelmann AG
+  "^edgeble,.*":
+    description: Edgeble AI Technologies Pvt. Ltd.
+  "^edimax,.*":
+    description: EDIMAX Technology Co., Ltd
+  "^edt,.*":
+    description: Emerging Display Technologies
+  "^ees,.*":
+    description: Emtop Embedded Solutions
+  "^eeti,.*":
+    description: eGalax_eMPIA Technology Inc
+  "^einfochips,.*":
+    description: Einfochips
+  "^eink,.*":
+    description: E Ink Corporation
+  "^elan,.*":
+    description: Elan Microelectronic Corp.
+  "^element14,.*":
+    description: Element14 (A Premier Farnell Company)
+  "^elgin,.*":
+    description: Elgin S/A.
+  "^elida,.*":
+    description: Shenzhen Elida Technology Co., Ltd.
+  "^elimo,.*":
+    description: Elimo Engineering Ltd.
+  "^elpida,.*":
+    description: Elpida Memory, Inc.
+  "^embedfire,.*":
+    description: Dongguan EmbedFire Electronic Technology Co., Ltd.
+  "^embest,.*":
+    description: Shenzhen Embest Technology Co., Ltd.
+  "^emlid,.*":
+    description: Emlid, Ltd.
+  "^emmicro,.*":
+    description: EM Microelectronic
+  "^empire-electronix,.*":
+    description: Empire Electronix
+  "^emtrion,.*":
+    description: emtrion GmbH
+  "^enclustra,.*":
+    description: Enclustra GmbH
+  "^endless,.*":
+    description: Endless Mobile, Inc.
+  "^ene,.*":
+    description: ENE Technology, Inc.
+  "^energymicro,.*":
+    description: Silicon Laboratories (formerly Energy Micro AS)
+  "^engicam,.*":
+    description: Engicam S.r.l.
+  "^engleder,.*":
+    description: Engleder
+  "^epcos,.*":
+    description: EPCOS AG
+  "^epfl,.*":
+    description: Ecole Polytechnique Fédérale de Lausanne
+  "^epson,.*":
+    description: Seiko Epson Corp.
+  "^esp,.*":
+    description: Espressif Systems Co. Ltd.
+  "^est,.*":
+    description: ESTeem Wireless Modems
+  "^ettus,.*":
+    description: NI Ettus Research
+  "^eukrea,.*":
+    description: Eukréa Electromatique
+  "^everest,.*":
+    description: Everest Semiconductor Co. Ltd.
+  "^everspin,.*":
+    description: Everspin Technologies, Inc.
+  "^evervision,.*":
+    description: Evervision Electronics Co. Ltd.
+  "^exar,.*":
+    description: Exar Corporation
+  "^excito,.*":
+    description: Excito
+  "^exegin,.*":
+    description: Exegin Technologies Limited
+  "^ezchip,.*":
+    description: EZchip Semiconductor
+  "^facebook,.*":
+    description: Facebook
+  "^fairphone,.*":
+    description: Fairphone B.V.
+  "^faraday,.*":
+    description: Faraday Technology Corporation
+  "^fastrax,.*":
+    description: Fastrax Oy
+  "^fcs,.*":
+    description: Fairchild Semiconductor
+  "^feixin,.*":
+    description: Shenzhen Feixin Photoelectic Co., Ltd
+  "^feiyang,.*":
+    description: Shenzhen Fly Young Technology Co.,LTD.
+  "^fii,.*":
+    description: Foxconn Industrial Internet
+  "^firefly,.*":
+    description: Firefly
+  "^focaltech,.*":
+    description: FocalTech Systems Co.,Ltd
+  "^forlinx,.*":
+    description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^frida,.*":
+    description: Shenzhen Frida LCD Co., Ltd.
+  "^friendlyarm,.*":
+    description: Guangzhou FriendlyARM Computer Tech Co., Ltd
+  "^fsl,.*":
+    description: Freescale Semiconductor
+  "^fujitsu,.*":
+    description: Fujitsu Ltd.
+  "^fxtec,.*":
+    description: FX Technology Ltd.
+  "^gardena,.*":
+    description: GARDENA GmbH
+  "^gateworks,.*":
+    description: Gateworks Corporation
+  "^gcw,.*":
+    description: Game Consoles Worldwide
+  "^ge,.*":
+    description: General Electric Company
+  "^geekbuying,.*":
+    description: GeekBuying
+  "^gef,.*":
+    description: GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+  "^GEFanuc,.*":
+    description: GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+  "^gemei,.*":
+    description: Gemei Digital Technology Co., Ltd.
+  "^genesys,.*":
+    description: Genesys Logic, Inc.
+  "^geniatech,.*":
+    description: Geniatech, Inc.
+  "^giantec,.*":
+    description: Giantec Semiconductor, Inc.
+  "^giantplus,.*":
+    description: Giantplus Technology Co., Ltd.
+  "^globalscale,.*":
+    description: Globalscale Technologies, Inc.
+  "^globaltop,.*":
+    description: GlobalTop Technology, Inc.
+  "^gmt,.*":
+    description: Global Mixed-mode Technology, Inc.
+  "^goldelico,.*":
+    description: Golden Delicious Computers GmbH & Co. KG
+  "^goodix,.*":
+    description: Shenzhen Huiding Technology Co., Ltd.
+  "^google,.*":
+    description: Google, Inc.
+  "^gplus,.*":
+    description: GPLUS
+  "^grinn,.*":
+    description: Grinn
+  "^grmn,.*":
+    description: Garmin Limited
+  "^gumstix,.*":
+    description: Gumstix, Inc.
+  "^gw,.*":
+    description: Gateworks Corporation
+                 use "gateworks" vendor prefix
+    deprecated: true
+  "^hannstar,.*":
+    description: HannStar Display Corporation
+  "^haochuangyi,.*":
+    description: Shenzhen Haochuangyi Technology Co.,Ltd
+  "^haoyu,.*":
+    description: Haoyu Microelectronic Co. Ltd.
+  "^hardkernel,.*":
+    description: Hardkernel Co., Ltd
+  "^hechuang,.*":
+    description: Shenzhen Hechuang Intelligent Co.
+  "^hideep,.*":
+    description: HiDeep Inc.
+  "^himax,.*":
+    description: Himax Technologies, Inc.
+  "^hirschmann,.*":
+    description: Hirschmann Automation and Control GmbH
+  "^hisi,.*":
+    description: HiSilicon Limited (deprecated, use hisilicon)
+    deprecated: true
+  "^hisilicon,.*":
+    description: HiSilicon Limited.
+  "^hit,.*":
+    description: Hitachi Ltd.
+  "^hitex,.*":
+    description: Hitex Development Tools
+  "^holt,.*":
+    description: Holt Integrated Circuits, Inc.
+  "^holtek,.*":
+    description: Holtek Semiconductor, Inc.
+  "^honestar,.*":
+    description: Honestar Technologies Co., Ltd.
+  "^honeywell,.*":
+    description: Honeywell
+  "^hoperun,.*":
+    description: Jiangsu HopeRun Software Co., Ltd.
+  "^hp,.*":
+    description: Hewlett Packard Inc.
+  "^hpe,.*":
+    description: Hewlett Packard Enterprise
+  "^hsg,.*":
+    description: HannStar Display Co.
+  "^huawei,.*":
+    description: Huawei Technologies Co., Ltd.
+  "^hugsun,.*":
+    description: Shenzhen Hugsun Technology Co. Ltd.
+  "^hwacom,.*":
+    description: HwaCom Systems Inc.
+  "^hxt,.*":
+    description: HXT Semiconductor
+  "^hycon,.*":
+    description: Hycon Technology Corp.
+  "^hydis,.*":
+    description: Hydis Technologies
+  "^hynitron,.*":
+    description: Shanghai Hynitron Microelectronics Co. Ltd.
+  "^hynix,.*":
+    description: SK Hynix Inc.
+  "^hyundai,.*":
+    description: Hyundai Technology
+  "^i2se,.*":
+    description: I2SE GmbH
+  "^ibm,.*":
+    description: International Business Machines (IBM)
+  "^icplus,.*":
+    description: IC Plus Corp.
+  "^idt,.*":
+    description: Integrated Device Technologies, Inc.
+  "^ifi,.*":
+    description: Ingenieurburo Fur Ic-Technologie (I/F/I)
+  "^ilitek,.*":
+    description: ILI Technology Corporation (ILITEK)
+  "^imagis,.*":
+    description: Imagis Technologies Co., Ltd.
+  "^img,.*":
+    description: Imagination Technologies Ltd.
+  "^imi,.*":
+    description: Integrated Micro-Electronics Inc.
+  "^inanbo,.*":
+    description: Shenzhen INANBO Electronic Technology Co., Ltd.
+  "^incircuit,.*":
+    description: In-Circuit GmbH
+  "^indiedroid,.*":
+    description: Indiedroid
+  "^inet-tek,.*":
+    description: Shenzhen iNet Mobile Internet Technology Co., Ltd
+  "^infineon,.*":
+    description: Infineon Technologies
+  "^inforce,.*":
+    description: Inforce Computing
+  "^ingenic,.*":
+    description: Ingenic Semiconductor
+  "^ingrasys,.*":
+    description: Ingrasys Technology Inc.
+  "^injoinic,.*":
+    description: Injoinic Technology Corp.
+  "^innocomm,.*":
+    description: InnoComm Mobile Technology Corp.
+  "^innolux,.*":
+    description: Innolux Corporation
+  "^inside-secure,.*":
+    description: INSIDE Secure
+  "^insignal,.*":
+    description: Insignal Ltd.
+  "^inspur,.*":
+    description: Inspur Corporation
+  "^intel,.*":
+    description: Intel Corporation
+  "^intercontrol,.*":
+    description: Inter Control Group
+  "^invensense,.*":
+    description: InvenSense Inc.
+  "^inventec,.*":
+    description: Inventec
+  "^inversepath,.*":
+    description: Inverse Path
+  "^iom,.*":
+    description: Iomega Corporation
+  "^irondevice,.*":
+    description: Iron Device Corporation
+  "^isee,.*":
+    description: ISEE 2007 S.L.
+  "^isil,.*":
+    description: Intersil
+  "^issi,.*":
+    description: Integrated Silicon Solutions Inc.
+  "^ite,.*":
+    description: ITE Tech. Inc.
+  "^itead,.*":
+    description: ITEAD Intelligent Systems Co.Ltd
+  "^itian,.*":
+    description: ITian Corporation
+  "^ivo,.*":
+    description: InfoVision Optoelectronics Kunshan Co. Ltd.
+  "^iwave,.*":
+    description: iWave Systems Technologies Pvt. Ltd.
+  "^jadard,.*":
+    description: Jadard Technology Inc.
+  "^jasonic,.*":
+    description: Jasonic Technology Ltd.
+  "^jdi,.*":
+    description: Japan Display Inc.
+  "^jedec,.*":
+    description: JEDEC Solid State Technology Association
+  "^jesurun,.*":
+    description: Shenzhen Jesurun Electronics Business Dept.
+  "^jethome,.*":
+    description: JetHome (IP Sokolov P.A.)
+  "^jianda,.*":
+    description: Jiandangjing Technology Co., Ltd.
+  "^joz,.*":
+    description: JOZ BV
+  "^kam,.*":
+    description: Kamstrup A/S
+  "^karo,.*":
+    description: Ka-Ro electronics GmbH
+  "^keithkoep,.*":
+    description: Keith & Koep GmbH
+  "^keymile,.*":
+    description: Keymile GmbH
+  "^khadas,.*":
+    description: Khadas
+  "^kiebackpeter,.*":
+    description: Kieback & Peter GmbH
+  "^kinetic,.*":
+    description: Kinetic Technologies
+  "^kingdisplay,.*":
+    description: King & Display Technology Co., Ltd.
+  "^kingnovel,.*":
+    description: Kingnovel Technology Co., Ltd.
+  "^kionix,.*":
+    description: Kionix, Inc.
+  "^kobo,.*":
+    description: Rakuten Kobo Inc.
+  "^kobol,.*":
+    description: Kobol Innovations Pte. Ltd.
+  "^koe,.*":
+    description: Kaohsiung Opto-Electronics Inc.
+  "^kontron,.*":
+    description: Kontron S&T AG
+  "^kosagi,.*":
+    description: Sutajio Ko-Usagi PTE Ltd.
+  "^kvg,.*":
+    description: Kverneland Group
+  "^kyo,.*":
+    description: Kyocera Corporation
+  "^lacie,.*":
+    description: LaCie
+  "^laird,.*":
+    description: Laird PLC
+  "^lamobo,.*":
+    description: Ketai Huajie Technology Co., Ltd.
+  "^lantiq,.*":
+    description: Lantiq Semiconductor
+  "^lattice,.*":
+    description: Lattice Semiconductor
+  "^lctech,.*":
+    description: Shenzen LC Technology Co., Ltd.
+  "^leadtek,.*":
+    description: Shenzhen Leadtek Technology Co., Ltd.
+  "^leez,.*":
+    description: Leez
+  "^lego,.*":
+    description: LEGO Systems A/S
+  "^lemaker,.*":
+    description: Shenzhen LeMaker Technology Co., Ltd.
+  "^lenovo,.*":
+    description: Lenovo Group Ltd.
+  "^lg,.*":
+    description: LG Corporation
+  "^lgphilips,.*":
+    description: LG Display
+  "^libretech,.*":
+    description: Shenzhen Libre Technology Co., Ltd
+  "^licheepi,.*":
+    description: Lichee Pi
+  "^linaro,.*":
+    description: Linaro Limited
+  "^lineartechnology,.*":
+    description: Linear Technology
+  "^linksprite,.*":
+    description: LinkSprite Technologies, Inc.
+  "^linksys,.*":
+    description: Belkin International, Inc. (Linksys)
+  "^linutronix,.*":
+    description: Linutronix GmbH
+  "^linux,.*":
+    description: Linux-specific binding
+  "^linx,.*":
+    description: Linx Technologies
+  "^liteon,.*":
+    description: LITE-ON Technology Corp.
+  "^litex,.*":
+    description: LiteX SoC builder
+  "^lltc,.*":
+    description: Linear Technology Corporation
+  "^logicpd,.*":
+    description: Logic PD, Inc.
+  "^logictechno,.*":
+    description: Logic Technologies Limited
+  "^longcheer,.*":
+    description: Longcheer Technology (Shanghai) Co., Ltd.
+  "^lontium,.*":
+    description: Lontium Semiconductor Corporation
+  "^loongson,.*":
+    description: Loongson Technology Corporation Limited
+  "^loongmasses,.*":
+    description: Nanjing Loongmasses Ltd.
+  "^lsi,.*":
+    description: LSI Corp. (LSI Logic)
+  "^lunzn,.*":
+    description: Shenzhen Lunzn Technology Co., Ltd.
+  "^lwn,.*":
+    description: Liebherr-Werk Nenzing GmbH
+  "^lxa,.*":
+    description: Linux Automation GmbH
+  "^m5stack,.*":
+    description: M5Stack
+  "^macnica,.*":
+    description: Macnica Americas
+  "^mantix,.*":
+    description: Mantix Display Technology Co.,Ltd.
+  "^mapleboard,.*":
+    description: Mapleboard.org
+  "^marvell,.*":
+    description: Marvell Technology Group Ltd.
+  "^maxbotix,.*":
+    description: MaxBotix Inc.
+  "^maxim,.*":
+    description: Maxim Integrated Products
+  "^maxlinear,.*":
+    description: MaxLinear Inc.
+  "^mbvl,.*":
+    description: Mobiveil Inc.
+  "^mcube,.*":
+    description: mCube
+  "^meas,.*":
+    description: Measurement Specialties
+  "^mecer,.*":
+    description: Mustek Limited
+  "^mediatek,.*":
+    description: MediaTek Inc.
+  "^megachips,.*":
+    description: MegaChips
+  "^mele,.*":
+    description: Shenzhen MeLE Digital Technology Ltd.
+  "^melexis,.*":
+    description: Melexis N.V.
+  "^melfas,.*":
+    description: MELFAS Inc.
+  "^mellanox,.*":
+    description: Mellanox Technologies
+  "^memsensing,.*":
+    description: MEMSensing Microsystems Co., Ltd.
+  "^memsic,.*":
+    description: MEMSIC Inc.
+  "^menlo,.*":
+    description: Menlo Systems GmbH
+  "^mentor,.*":
+    description: Mentor Graphics
+  "^meraki,.*":
+    description: Cisco Meraki, LLC
+  "^merrii,.*":
+    description: Merrii Technology Co., Ltd.
+  "^methode,.*":
+    description: Methode Electronics, Inc.
+  "^micrel,.*":
+    description: Micrel Inc.
+  "^microchip,.*":
+    description: Microchip Technology Inc.
+  "^microcrystal,.*":
+    description: Micro Crystal AG
+  "^micron,.*":
+    description: Micron Technology Inc.
+  "^microsoft,.*":
+    description: Microsoft Corporation
+  "^microsys,.*":
+    description: MicroSys Electronics GmbH
+  "^mikroe,.*":
+    description: MikroElektronika d.o.o.
+  "^mikrotik,.*":
+    description: MikroTik
+  "^miniand,.*":
+    description: Miniand Tech
+  "^minix,.*":
+    description: MINIX Technology Ltd.
+  "^miramems,.*":
+    description: MiraMEMS Sensing Technology Co., Ltd.
+  "^mitsubishi,.*":
+    description: Mitsubishi Electric Corporation
+  "^mixel,.*":
+    description: Mixel, Inc.
+  "^miyoo,.*":
+    description: Miyoo
+  "^mntre,.*":
+    description: MNT Research GmbH
+  "^modtronix,.*":
+    description: Modtronix Engineering
+  "^moortec,.*":
+    description: Moortec Semiconductor Ltd.
+  "^mosaixtech,.*":
+    description: Mosaix Technologies, Inc.
+  "^motorcomm,.*":
+    description: MotorComm, Inc.
+  "^motorola,.*":
+    description: Motorola, Inc.
+  "^moxa,.*":
+    description: Moxa Inc.
+  "^mpl,.*":
+    description: MPL AG
+  "^mps,.*":
+    description: Monolithic Power Systems Inc.
+  "^mqmaker,.*":
+    description: mqmaker Inc.
+  "^mrvl,.*":
+    description: Marvell Technology Group Ltd.
+    deprecated: true
+  "^mscc,.*":
+    description: Microsemi Corporation
+  "^msi,.*":
+    description: Micro-Star International Co. Ltd.
+  "^mstar,.*":
+    description: MStar Semiconductor, Inc. (acquired by MediaTek Inc.)
+  "^mti,.*":
+    description: Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
+  "^multi-inno,.*":
+    description: Multi-Inno Technology Co.,Ltd
+  "^mundoreader,.*":
+    description: Mundo Reader S.L.
+  "^murata,.*":
+    description: Murata Manufacturing Co., Ltd.
+  "^mxic,.*":
+    description: Macronix International Co., Ltd.
+    deprecated: true
+  "^mxicy,.*":
+    description: Macronix International Co., Ltd.
+  "^myir,.*":
+    description: MYIR Tech Limited
+  "^national,.*":
+    description: National Semiconductor
+  "^nec,.*":
+    description: NEC LCD Technologies, Ltd.
+  "^neonode,.*":
+    description: Neonode Inc.
+  "^netgear,.*":
+    description: NETGEAR
+  "^netlogic,.*":
+    description: Broadcom Corporation (formerly NetLogic Microsystems)
+  "^netron-dy,.*":
+    description: Netron DY
+  "^netronix,.*":
+    description: Netronix, Inc.
+  "^netxeon,.*":
+    description: Shenzhen Netxeon Technology CO., LTD
+  "^neweast,.*":
+    description: Guangdong Neweast Optoelectronics CO., LTD
+  "^newhaven,.*":
+    description: Newhaven Display International
+  "^newvision,.*":
+    description: New Vision Display (Shenzhen) Co., Ltd.
+  "^nexbox,.*":
+    description: Nexbox
+  "^nextthing,.*":
+    description: Next Thing Co.
+  "^ni,.*":
+    description: National Instruments
+  "^nintendo,.*":
+    description: Nintendo
+  "^nlt,.*":
+    description: NLT Technologies, Ltd.
+  "^nokia,.*":
+    description: Nokia
+  "^nordic,.*":
+    description: Nordic Semiconductor
+  "^novatek,.*":
+    description: Novatek
+  "^novtech,.*":
+    description: NovTech, Inc.
+  "^nutsboard,.*":
+    description: NutsBoard
+  "^nuvoton,.*":
+    description: Nuvoton Technology Corporation
+  "^nvd,.*":
+    description: New Vision Display
+  "^nvidia,.*":
+    description: NVIDIA
+  "^nxp,.*":
+    description: NXP Semiconductors
+  "^oceanic,.*":
+    description: Oceanic Systems (UK) Ltd.
+  "^ocs,.*":
+    description: Orient Chip Technology Co., Ltd.
+  "^oct,.*":
+    description: Octavo Systems LLC
+  "^okaya,.*":
+    description: Okaya Electric America, Inc.
+  "^oki,.*":
+    description: Oki Electric Industry Co., Ltd.
+  "^olimex,.*":
+    description: OLIMEX Ltd.
+  "^olpc,.*":
+    description: One Laptop Per Child
+  "^oneplus,.*":
+    description: OnePlus Technology (Shenzhen) Co., Ltd.
+  "^onie,.*":
+    description: Open Network Install Environment group
+  "^onion,.*":
+    description: Onion Corporation
+  "^onnn,.*":
+    description: ON Semiconductor Corp.
+  "^ontat,.*":
+    description: On Tat Industrial Company
+  "^opalkelly,.*":
+    description: Opal Kelly Incorporated
+  "^openailab,.*":
+    description: openailab.com
+  "^opencores,.*":
+    description: OpenCores.org
+  "^openembed,.*":
+    description: OpenEmbed
+  "^openpandora,.*":
+    description: OpenPandora GmbH
+  "^openrisc,.*":
+    description: OpenRISC.io
+  "^option,.*":
+    description: Option NV
+  "^oranth,.*":
+    description: Shenzhen Oranth Technology Co., Ltd.
+  "^ORCL,.*":
+    description: Oracle Corporation
+  "^orisetech,.*":
+    description: Orise Technology
+  "^ortustech,.*":
+    description: Ortus Technology Co., Ltd.
+  "^osddisplays,.*":
+    description: OSD Displays
+  "^osmc,.*":
+    description: Sam Nazarko Trading Ltd. (Open Source Media Centre)
+  "^ouya,.*":
+    description: Ouya Inc.
+  "^overkiz,.*":
+    description: Overkiz SAS
+  "^ovti,.*":
+    description: OmniVision Technologies
+  "^oxsemi,.*":
+    description: Oxford Semiconductor, Ltd.
+  "^ozzmaker,.*":
+    description: OzzMaker
+  "^panasonic,.*":
+    description: Panasonic Corporation
+  "^parade,.*":
+    description: Parade Technologies Inc.
+  "^parallax,.*":
+    description: Parallax Inc.
+  "^pda,.*":
+    description: Precision Design Associates, Inc.
+  "^pericom,.*":
+    description: Pericom Technology Inc.
+  "^pervasive,.*":
+    description: Pervasive Displays, Inc.
+  "^phicomm,.*":
+    description: PHICOMM Co., Ltd.
+  "^phytec,.*":
+    description: PHYTEC Messtechnik GmbH
+  "^picochip,.*":
+    description: Picochip Ltd
+  "^pine64,.*":
+    description: Pine64
+  "^pineriver,.*":
+    description: Shenzhen PineRiver Designs Co., Ltd.
+  "^pixcir,.*":
+    description: PIXCIR MICROELECTRONICS Co., Ltd
+  "^plantower,.*":
+    description: Plantower Co., Ltd
+  "^plathome,.*":
+    description: Plat\'Home Co., Ltd.
+  "^plda,.*":
+    description: PLDA
+  "^plx,.*":
+    description: Broadcom Corporation (formerly PLX Technology)
+  "^ply,.*":
+    description: Plymovent Group BV
+  "^pni,.*":
+    description: PNI Sensor Corporation
+  "^pocketbook,.*":
+    description: PocketBook International SA
+  "^polaroid,.*":
+    description: Polaroid Corporation
+  "^polyhex,.*":
+    description: Polyhex Technology Co. Ltd.
+  "^portwell,.*":
+    description: Portwell Inc.
+  "^poslab,.*":
+    description: Poslab Technology Co., Ltd.
+  "^pov,.*":
+    description: Point of View International B.V.
+  "^powertip,.*":
+    description: Powertip Tech. Corp.
+  "^powervr,.*":
+    description: PowerVR (deprecated, use img)
+  "^primux,.*":
+    description: Primux Trading, S.L.
+  "^probox2,.*":
+    description: PROBOX2 (by W2COMP Co., Ltd.)
+  "^prt,.*":
+    description: Protonic Holland
+  "^pulsedlight,.*":
+    description: PulsedLight, Inc
+  "^purism,.*":
+    description: Purism, SPC
+  "^qca,.*":
+    description: Qualcomm Atheros, Inc.
+  "^qcom,.*":
+    description: Qualcomm Technologies, Inc
+  "^qemu,.*":
+    description: QEMU, a generic and open source machine emulator and virtualizer
+  "^qi,.*":
+    description: Qi Hardware
+  "^qiaodian,.*":
+    description: QiaoDian XianShi Corporation
+  "^qihua,.*":
+    description: Chengdu Kaixuan Information Technology Co., Ltd.
+  "^qishenglong,.*":
+    description: Shenzhen QiShenglong Industrialist Co., Ltd.
+  "^qnap,.*":
+    description: QNAP Systems, Inc.
+  "^quanta,.*":
+    description: Quanta Computer Inc.
+  "^radxa,.*":
+    description: Radxa
+  "^raidsonic,.*":
+    description: RaidSonic Technology GmbH
+  "^ralink,.*":
+    description: Mediatek/Ralink Technology Corp.
+  "^ramtron,.*":
+    description: Ramtron International
+  "^raspberrypi,.*":
+    description: Raspberry Pi Foundation
+  "^raydium,.*":
+    description: Raydium Semiconductor Corp.
+  "^rda,.*":
+    description: Unisoc Communications, Inc.
+  "^realtek,.*":
+    description: Realtek Semiconductor Corp.
+  "^remarkable,.*":
+    description: reMarkable AS
+  "^renesas,.*":
+    description: Renesas Electronics Corporation
+  "^rervision,.*":
+    description: Shenzhen Rervision Technology Co., Ltd.
+  "^revotics,.*":
+    description: Revolution Robotics, Inc. (Revotics)
+  "^rex,.*":
+    description: iMX6 Rex Project
+  "^richtek,.*":
+    description: Richtek Technology Corporation
+  "^ricoh,.*":
+    description: Ricoh Co. Ltd.
+  "^rikomagic,.*":
+    description: Rikomagic Tech Corp. Ltd
+  "^riot,.*":
+    description: Embest RIoT
+  "^riscv,.*":
+    description: RISC-V Foundation
+  "^rockchip,.*":
+    description: Fuzhou Rockchip Electronics Co., Ltd
+  "^rocktech,.*":
+    description: ROCKTECH DISPLAYS LIMITED
+  "^rohm,.*":
+    description: ROHM Semiconductor Co., Ltd
+  "^ronbo,.*":
+    description: Ronbo Electronics
+  "^roofull,.*":
+    description: Shenzhen Roofull Technology Co, Ltd
+  "^roseapplepi,.*":
+    description: RoseapplePi.org
+  "^saef,.*":
+    description: Saef Technology Limited
+  "^samsung,.*":
+    description: Samsung Semiconductor
+  "^samtec,.*":
+    description: Samtec/Softing company
+  "^sancloud,.*":
+    description: Sancloud Ltd
+  "^sandisk,.*":
+    description: Sandisk Corporation
+  "^satoz,.*":
+    description: Satoz International Co., Ltd
+  "^sbs,.*":
+    description: Smart Battery System
+  "^schindler,.*":
+    description: Schindler
+  "^seagate,.*":
+    description: Seagate Technology PLC
+  "^seeed,.*":
+    description: Seeed Technology Co., Ltd
+  "^seirobotics,.*":
+    description: Shenzhen SEI Robotics Co., Ltd
+  "^semtech,.*":
+    description: Semtech Corporation
+  "^senseair,.*":
+    description: Senseair AB
+  "^sensirion,.*":
+    description: Sensirion AG
+  "^sensortek,.*":
+    description: Sensortek Technology Corporation
+  "^sercomm,.*":
+    description: Sercomm (Suzhou) Corporation
+  "^sff,.*":
+    description: Small Form Factor Committee
+  "^sgd,.*":
+    description: Solomon Goldentek Display Corporation
+  "^sgmicro,.*":
+    description: SG Micro Corp
+  "^sgx,.*":
+    description: SGX Sensortech
+  "^sharp,.*":
+    description: Sharp Corporation
+  "^shift,.*":
+    description: SHIFT GmbH
+  "^shimafuji,.*":
+    description: Shimafuji Electric, Inc.
+  "^shineworld,.*":
+    description: ShineWorld Innovations
+  "^shiratech,.*":
+    description: Shiratech Solutions
+  "^si-en,.*":
+    description: Si-En Technology Ltd.
+  "^si-linux,.*":
+    description: Silicon Linux Corporation
+  "^siemens,.*":
+    description: Siemens AG
+  "^sifive,.*":
+    description: SiFive, Inc.
+  "^sigma,.*":
+    description: Sigma Designs, Inc.
+  "^sii,.*":
+    description: Seiko Instruments, Inc.
+  "^sil,.*":
+    description: Silicon Image
+  "^silabs,.*":
+    description: Silicon Laboratories
+  "^silan,.*":
+    description: Hangzhou Silan Microelectronics Co., Ltd.
+  "^silead,.*":
+    description: Silead Inc.
+  "^silergy,.*":
+    description: Silergy Corp.
+  "^silex-insight,.*":
+    description: Silex Insight
+  "^siliconfile,.*":
+    description: Siliconfile Technologies lnc.
+  "^siliconmitus,.*":
+    description: Silicon Mitus, Inc.
+  "^silvaco,.*":
+    description: Silvaco, Inc.
+  "^simtek,.*":
+    description: Cypress Semiconductor Corporation (Simtek Corporation)
+  "^sinlinx,.*":
+    description: Sinlinx Electronics Technology Co., LTD
+  "^sinovoip,.*":
+    description: SinoVoip Co., Ltd
+  "^sinowealth,.*":
+    description: SINO WEALTH Electronic Ltd.
+  "^sipeed,.*":
+    description: Shenzhen Sipeed Technology Co., Ltd.
+  "^sirf,.*":
+    description: SiRF Technology, Inc.
+  "^sis,.*":
+    description: Silicon Integrated Systems Corp.
+  "^sitronix,.*":
+    description: Sitronix Technology Corporation
+  "^skov,.*":
+    description: SKOV A/S
+  "^skyworks,.*":
+    description: Skyworks Solutions, Inc.
+  "^smartlabs,.*":
+    description: SmartLabs LLC
+  "^smsc,.*":
+    description: Standard Microsystems Corporation
+  "^snps,.*":
+    description: Synopsys, Inc.
+  "^sochip,.*":
+    description: Shenzhen SoChip Technology Co., Ltd.
+  "^socionext,.*":
+    description: Socionext Inc.
+  "^solidrun,.*":
+    description: SolidRun
+  "^solomon,.*":
+    description: Solomon Systech Limited
+  "^sony,.*":
+    description: Sony Corporation
+  "^sourceparts,.*":
+    description: Source Parts Inc.
+  "^spansion,.*":
+    description: Spansion Inc.
+  "^sparkfun,.*":
+    description: SparkFun Electronics
+  "^spinalhdl,.*":
+    description: SpinalHDL
+  "^sprd,.*":
+    description: Spreadtrum Communications Inc.
+  "^square,.*":
+    description: Square
+  "^ssi,.*":
+    description: SSI Computer Corp
+  "^sst,.*":
+    description: Silicon Storage Technology, Inc.
+  "^sstar,.*":
+    description: Xiamen Xingchen(SigmaStar) Technology Co., Ltd.
+      (formerly part of MStar Semiconductor, Inc.)
+  "^st,.*":
+    description: STMicroelectronics
+  "^starfive,.*":
+    description: StarFive Technology Co. Ltd.
+  "^starry,.*":
+    description: Starry Electronic Technology (ShenZhen) Co., LTD
+  "^startek,.*":
+    description: Startek
+  "^starterkit,.*":
+    description: Starterkit
+  "^ste,.*":
+    description: ST-Ericsson
+    deprecated: true
+  "^stericsson,.*":
+    description: ST-Ericsson
+  "^st-ericsson,.*":
+    description: ST-Ericsson
+    deprecated: true
+  "^storlink,.*":
+    description: StorLink Semiconductors, Inc.
+  "^storm,.*":
+    description: Storm Semiconductor, Inc.
+  "^storopack,.*":
+    description: Storopack
+  "^summit,.*":
+    description: Summit microelectronics
+  "^sunchip,.*":
+    description: Shenzhen Sunchip Technology Co., Ltd
+  "^sundance,.*":
+    description: Sundance DSP Inc.
+  "^sunplus,.*":
+    description: Sunplus Technology Co., Ltd.
+  "^SUNW,.*":
+    description: Sun Microsystems, Inc
+  "^supermicro,.*":
+    description: Super Micro Computer, Inc.
+  "^swir,.*":
+    description: Sierra Wireless
+  "^syna,.*":
+    description: Synaptics Inc.
+  "^synology,.*":
+    description: Synology, Inc.
+  "^synopsys,.*":
+    description: Synopsys, Inc. (deprecated, use snps)
+    deprecated: true
+  "^tbs,.*":
+    description: TBS Technologies
+  "^tbs-biometrics,.*":
+    description: Touchless Biometric Systems AG
+  "^tcg,.*":
+    description: Trusted Computing Group
+  "^tcl,.*":
+    description: Toby Churchill Ltd.
+  "^tcs,.*":
+    description: Shenzhen City Tang Cheng Technology Co., Ltd.
+  "^tdo,.*":
+    description: Shangai Top Display Optoelectronics Co., Ltd
+  "^team-source-display,.*":
+    description: Shenzhen Team Source Display Technology Co., Ltd. (TSD)
+  "^technexion,.*":
+    description: TechNexion
+  "^technologic,.*":
+    description: Technologic Systems
+  "^techstar,.*":
+    description: Shenzhen Techstar Electronics Co., Ltd.
+  "^teejet,.*":
+    description: TeeJet
+  "^teltonika,.*":
+    description: Teltonika Networks
+  "^tempo,.*":
+    description: Tempo Semiconductor
+  "^terasic,.*":
+    description: Terasic Inc.
+  "^tesla,.*":
+    description: Tesla, Inc.
+  "^tfc,.*":
+    description: Three Five Corp
+  "^thead,.*":
+    description: T-Head Semiconductor Co., Ltd.
+  "^thine,.*":
+    description: THine Electronics, Inc.
+  "^thingyjp,.*":
+    description: thingy.jp
+  "^thundercomm,.*":
+    description: Thundercomm Technology Co., Ltd.
+  "^thwc,.*":
+    description: Shenzhen Tong Heng Wei Chuang Technology Co., Ltd.
+  "^ti,.*":
+    description: Texas Instruments
+  "^tianma,.*":
+    description: Tianma Micro-electronics Co., Ltd.
+  "^tlm,.*":
+    description: Trusted Logic Mobility
+  "^tmt,.*":
+    description: Tecon Microprocessor Technologies, LLC.
+  "^topeet,.*":
+    description: Topeet
+  "^topic,.*":
+    description: Topic Embedded Systems
+  "^toppoly,.*":
+    description: TPO (deprecated, use tpo)
+    deprecated: true
+  "^topwise,.*":
+    description: Topwise Communication Co., Ltd.
+  "^toradex,.*":
+    description: Toradex AG
+  "^toshiba,.*":
+    description: Toshiba Corporation
+  "^toumaz,.*":
+    description: Toumaz
+  "^tpk,.*":
+    description: TPK U.S.A. LLC
+  "^tplink,.*":
+    description: TP-LINK Technologies Co., Ltd.
+  "^tpo,.*":
+    description: TPO
+  "^tq,.*":
+    description: TQ-Systems GmbH
+  "^traverse,.*":
+    description: Traverse Technologies Australia Pty Ltd
+  "^tronfy,.*":
+    description: Tronfy
+  "^tronsmart,.*":
+    description: Tronsmart
+  "^truly,.*":
+    description: Truly Semiconductors Limited
+  "^tsd,.*":
+    description: Theobroma Systems Design und Consulting GmbH
+  "^tyan,.*":
+    description: Tyan Computer Corporation
+  "^u-blox,.*":
+    description: u-blox
+  "^u-boot,.*":
+    description: U-Boot bootloader
+  "^ubnt,.*":
+    description: Ubiquiti Networks
+  "^ucrobotics,.*":
+    description: uCRobotics
+  "^udoo,.*":
+    description: Udoo
+  "^ufispace,.*":
+    description: Ufi Space Co., Ltd.
+  "^ugoos,.*":
+    description: Ugoos Industrial Co., Ltd.
+  "^uniwest,.*":
+    description: United Western Technologies Corp (UniWest)
+  "^upisemi,.*":
+    description: uPI Semiconductor Corp.
+  "^urt,.*":
+    description: United Radiant Technology Corporation
+  "^usi,.*":
+    description: Universal Scientific Industrial Co., Ltd.
+  "^utoo,.*":
+    description: Aigo Digital Technology Co., Ltd.
+  "^v3,.*":
+    description: V3 Semiconductor
+  "^vaisala,.*":
+    description: Vaisala
+  "^vamrs,.*":
+    description: Vamrs Ltd.
+  "^variscite,.*":
+    description: Variscite Ltd.
+  "^vdl,.*":
+    description: Van der Laan b.v.
+  "^vertexcom,.*":
+    description: Vertexcom Technologies, Inc.
+  "^via,.*":
+    description: VIA Technologies, Inc.
+  "^vialab,.*":
+    description: VIA Labs, Inc.
+  "^vicor,.*":
+    description: Vicor Corporation
+  "^videostrong,.*":
+    description: Videostrong Technology Co., Ltd.
+  "^virtio,.*":
+    description: Virtual I/O Device Specification, developed by the OASIS consortium
+  "^virtual,.*":
+    description: Used for virtual device without specific vendor.
+  "^vishay,.*":
+    description: Vishay Intertechnology, Inc
+  "^visionox,.*":
+    description: Visionox
+  "^vitesse,.*":
+    description: Vitesse Semiconductor Corporation
+  "^vivante,.*":
+    description: Vivante Corporation
+  "^vivax,.*":
+    description: Vivax brand by M SAN Grupa d.o.o.
+  "^vocore,.*":
+    description: VoCore Studio
+  "^voipac,.*":
+    description: Voipac Technologies s.r.o.
+  "^vot,.*":
+    description: Vision Optical Technology Co., Ltd.
+  "^vxt,.*":
+    description: VXT Ltd
+  "^wanchanglong,.*":
+    description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
+  "^wand,.*":
+    description: Wandbord (Technexion)
+  "^waveshare,.*":
+    description: Waveshare Electronics
+  "^wd,.*":
+    description: Western Digital Corp.
+  "^we,.*":
+    description: Würth Elektronik GmbH.
+  "^welltech,.*":
+    description: Welltech Computer Co., Limited.
+  "^wetek,.*":
+    description: WeTek Electronics, limited.
+  "^wexler,.*":
+    description: Wexler
+  "^whwave,.*":
+    description: Shenzhen whwave Electronics, Inc.
+  "^wi2wi,.*":
+    description: Wi2Wi, Inc.
+  "^widora,.*":
+    description: Beijing Widora Technology Co., Ltd.
+  "^wiligear,.*":
+    description: Wiligear, Ltd.
+  "^willsemi,.*":
+    description: Will Semiconductor Ltd.
+  "^winbond,.*":
+    description: Winbond Electronics corp.
+  "^wingtech,.*":
+    description: Wingtech Technology Co., Ltd.
+  "^winlink,.*":
+    description: WinLink Co., Ltd
+  "^winstar,.*":
+    description: Winstar Display Corp.
+  "^wirelesstag,.*":
+    description: Wireless Tag (qiming yunduan)
+  "^wits,.*":
+    description: Shenzhen Merrii Technology Co., Ltd. (WITS)
+  "^wlf,.*":
+    description: Wolfson Microelectronics
+  "^wm,.*":
+    description: Wondermedia Technologies, Inc.
+  "^wobo,.*":
+    description: Wobo
+  "^x-powers,.*":
+    description: X-Powers
+  "^xen,.*":
+    description: Xen Hypervisor
+  "^xes,.*":
+    description: Extreme Engineering Solutions (X-ES)
+  "^xiaomi,.*":
+    description: Xiaomi Technology Co., Ltd.
+  "^xillybus,.*":
+    description: Xillybus Ltd.
+  "^xingbangda,.*":
+    description: Shenzhen Xingbangda Display Technology Co., Ltd
+  "^xinpeng,.*":
+    description: Shenzhen Xinpeng Technology Co., Ltd
+  "^xiphera,.*":
+    description: Xiphera Ltd.
+  "^xlnx,.*":
+    description: Xilinx
+  "^xnano,.*":
+    description: Xnano
+  "^xunlong,.*":
+    description: Shenzhen Xunlong Software CO.,Limited
+  "^xylon,.*":
+    description: Xylon
+  "^yadro,.*":
+    description: YADRO
+  "^yamaha,.*":
+    description: Yamaha Corporation
+  "^yes-optoelectronics,.*":
+    description: Yes Optoelectronics Co.,Ltd.
+  "^yic,.*":
+    description: YIC System Co., Ltd.
+  "^yiming,.*":
+    description: Henan Yiming Technology Co., Ltd.
+  "^ylm,.*":
+    description: Shenzhen Yangliming Electronic Technology Co., Ltd.
+  "^yna,.*":
+    description: YSH & ATIL
+  "^yones-toptech,.*":
+    description: Yones Toptech Co., Ltd.
+  "^ys,.*":
+    description: Shenzhen Yashi Changhua Intelligent Technology Co., Ltd.
+  "^ysoft,.*":
+    description: Y Soft Corporation a.s.
+  "^zarlink,.*":
+    description: Zarlink Semiconductor
+  "^zealz,.*":
+    description: Zealz
+  "^zeitec,.*":
+    description: ZEITEC Semiconductor Co., LTD.
+  "^zidoo,.*":
+    description: Shenzhen Zidoo Technology Co., Ltd.
+  "^zii,.*":
+    description: Zodiac Inflight Innovations
+  "^zinitix,.*":
+    description: Zinitix Co., Ltd
+  "^zkmagic,.*":
+    description: Shenzhen Zkmagic Technology Co., Ltd.
+  "^zte,.*":
+    description: ZTE Corp.
+  "^zyxel,.*":
+    description: ZyXEL Communications Corp.
+
+  # Normal property name match without a comma
+  # These should catch all node/property names without a prefix
+  "^[a-zA-Z0-9#_][a-zA-Z0-9+\\-._@]{0,63}$": true
+  "^[a-zA-Z0-9+\\-._]*@[0-9a-zA-Z,]*$": true
+  "^#.*": true
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml
new file mode 100644
index 0000000000..0aa8433f0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/mmio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio memory mapped devices
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description:
+  See https://www.oasis-open.org/committees/tc_home.php?wg_abbrev=virtio for
+  more details.
+
+properties:
+  compatible:
+    const: virtio,mmio
+
+  reg:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  '#iommu-cells':
+    description: Required when the node corresponds to a virtio-iommu device.
+    const: 1
+
+  iommus:
+    description: Required for devices making accesses thru an IOMMU.
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: Required for setting irq of a virtio_mmio device as wakeup source.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        /* Device has endpoint ID 23 */
+        iommus = <&viommu 23>;
+    };
+
+    viommu: iommu@3100 {
+        compatible = "virtio,mmio";
+        reg = <0x3100 0x100>;
+        interrupts = <42>;
+
+        #iommu-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/pci-iommu.yaml b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
new file mode 100644
index 0000000000..972a785a42
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/pci-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio-iommu device using the virtio-pci transport
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description: |
+  When virtio-iommu uses the PCI transport, its programming interface is
+  discovered dynamically by the PCI probing infrastructure. However the
+  device tree statically describes the relation between IOMMU and DMA
+  masters. Therefore, the PCI root complex that hosts the virtio-iommu
+  contains a child node representing the IOMMU device explicitly.
+
+  DMA from the IOMMU device isn't managed by another IOMMU. Therefore the
+  virtio-iommu node doesn't have an "iommus" property, and is omitted from
+  the iommu-map property of the root complex.
+
+properties:
+  # If compatible is present, it should contain the vendor and device ID
+  # according to the PCI Bus Binding specification. Since PCI provides
+  # built-in identification methods, compatible is not actually required.
+  compatible:
+    oneOf:
+      - items:
+          - const: virtio,pci-iommu
+          - const: pci1af4,1057
+      - items:
+          - const: pci1af4,1057
+
+  reg:
+    description: |
+      PCI address of the IOMMU. As defined in the PCI Bus Binding
+      reference, the reg property is a five-cell address encoded as (phys.hi
+      phys.mid phys.lo size.hi size.lo). phys.hi should contain the device's
+      BDF as 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be
+      zero. See Documentation/devicetree/bindings/pci/pci.txt
+
+  '#iommu-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@40000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU manages all functions in this PCI domain except
+             * itself. Omit BDF 00:01.0.
+             */
+            iommu-map = <0x0 &iommu0 0x0 0x8
+                         0x9 &iommu0 0x9 0xfff7>;
+
+            /* The IOMMU programming interface uses slot 00:01.0 */
+            iommu0: iommu@1,0 {
+                compatible = "pci1af4,1057";
+                reg = <0x800 0 0 0 0>;
+                #iommu-cells = <1>;
+            };
+        };
+
+        pcie@50000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x50000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x51000000  0x0 0x51000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU also manages all functions from this domain,
+             * with endpoint IDs 0x10000 - 0x1ffff
+             */
+            iommu-map = <0x0 &iommu0 0x10000 0x10000>;
+        };
+
+        ethernet {
+            /* The IOMMU manages this platform device with endpoint ID 0x20000 */
+            iommus = <&iommu0 0x20000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/virtio/virtio-device.yaml b/Documentation/devicetree/bindings/virtio/virtio-device.yaml
new file mode 100644
index 0000000000..8c6919ba94
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/virtio-device.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/virtio-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio device
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description:
+  These bindings are applicable to virtio devices irrespective of the bus they
+  are bound to, like mmio or pci.
+
+# We need a select here so we don't match all nodes with 'virtio,mmio'
+properties:
+  compatible:
+    pattern: "^virtio,device[0-9a-f]{1,8}$"
+    description: Virtio device nodes.
+      "virtio,deviceID", where ID is the virtio device id. The textual
+      representation of ID shall be in lower case hexadecimal with leading
+      zeroes suppressed.
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <43>;
+
+        i2c {
+            compatible = "virtio,device22";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
new file mode 100644
index 0000000000..55adea827c
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/fsl-imx-owire.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/fsl-imx-owire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX One wire bus master controller
+
+maintainers:
+  - Martin Fuzzey <mfuzzey@parkeon.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-owire
+      - items:
+          - enum:
+              - fsl,imx27-owire
+              - fsl,imx50-owire
+              - fsl,imx51-owire
+              - fsl,imx53-owire
+          - const: fsl,imx21-owire
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    owire@63fa4000 {
+        compatible = "fsl,imx53-owire", "fsl,imx21-owire";
+        reg = <0x63fa4000 0x4000>;
+        clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+    };
diff --git a/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
new file mode 100644
index 0000000000..422becc6e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/maxim,ds2482.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/maxim,ds2482.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim One wire bus master controller
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@chargebyte.com>
+
+description: |
+  I2C to 1-wire bridges
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ds2482-100.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/DS2482-800.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/DS2484.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,ds2482
+      - maxim,ds2484
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      onewire@18 {
+        compatible = "maxim,ds2484";
+        reg = <0x18>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/w1/omap-hdq.txt b/Documentation/devicetree/bindings/w1/omap-hdq.txt
new file mode 100644
index 0000000000..913c5f91a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/omap-hdq.txt
@@ -0,0 +1,22 @@
+* OMAP HDQ One wire bus master controller
+
+Required properties:
+- compatible : should be "ti,omap3-1w" or "ti,am4372-hdq"
+- reg : Address and length of the register set for the device
+- interrupts : interrupt line.
+- ti,hwmods : "hdq1w"
+
+Optional properties:
+- ti,mode: should be "hdq": HDQ mode  "1w": one-wire mode.
+	   If not specified HDQ mode is implied.
+
+Example:
+
+- From omap3.dtsi
+  hdqw1w: 1w@480b2000 {
+	compatible = "ti,omap3-1w";
+	reg = <0x480b2000 0x1000>;
+	interrupts = <58>;
+	ti,hwmods = "hdq1w";
+	ti,mode = "hdq";
+  };
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.yaml b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
new file mode 100644
index 0000000000..b02b022370
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitbanged GPIO 1-Wire Bus
+
+maintainers:
+  - Daniel Mack <zonque@gmail.com>
+
+properties:
+  compatible:
+    const: w1-gpio
+
+  gpios:
+    minItems: 1
+    items:
+      - description: Data I/O pin
+      - description: Enable pin for an external pull-up resistor
+
+  linux,open-drain:
+    type: boolean
+    description: >
+      If specified, the data pin is considered in open-drain mode.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    onewire {
+        compatible = "w1-gpio";
+        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/w1/w1.txt b/Documentation/devicetree/bindings/w1/w1.txt
new file mode 100644
index 0000000000..05f26b27d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1.txt
@@ -0,0 +1,25 @@
+Generic devicetree bindings for onewire (w1) busses
+===================================================
+
+Onewire busses are described through nodes of their master bus controller.
+Slave devices are listed as sub-nodes of such master devices. For now, only
+one slave is allowed per bus master.
+
+
+Example:
+
+	charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio 100 0>, <&gpio 101 0>;
+
+		battery {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
new file mode 100644
index 0000000000..274519fc24
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/allwinner,sun4i-a10-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Watchdog
+
+allOf:
+  - $ref: watchdog.yaml#
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-wdt
+      - const: allwinner,sun6i-a31-wdt
+      - items:
+          - enum:
+              - allwinner,sun50i-a64-wdt
+              - allwinner,sun50i-a100-wdt
+              - allwinner,sun50i-h6-wdt
+              - allwinner,sun50i-h616-wdt
+              - allwinner,sun50i-r329-wdt
+              - allwinner,sun50i-r329-wdt-reset
+              - allwinner,suniv-f1c100s-wdt
+          - const: allwinner,sun6i-a31-wdt
+      - const: allwinner,sun20i-d1-wdt
+      - items:
+          - const: allwinner,sun20i-d1-wdt-reset
+          - const: allwinner,sun20i-d1-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: 32 KHz input clock
+      - description: secondary clock source
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun20i-d1-wdt
+          - allwinner,sun20i-d1-wdt-reset
+          - allwinner,sun50i-r329-wdt
+          - allwinner,sun50i-r329-wdt-reset
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: High-frequency oscillator input, divided internally
+        - description: Low-frequency oscillator input
+
+    clock-names:
+      items:
+        - const: hosc
+        - const: losc
+
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    wdt: watchdog@1c20c90 {
+        compatible = "allwinner,sun4i-a10-wdt";
+        reg = <0x01c20c90 0x10>;
+        interrupts = <24>;
+        clocks = <&osc24M>;
+        timeout-sec = <10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
new file mode 100644
index 0000000000..fea84f5b7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/alphascale,asm9260-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale asm9260 Watchdog timer
+
+allOf:
+  - $ref: watchdog.yaml#
+
+maintainers:
+  - Oleksij Rempel <linux@rempel-privat.de>
+
+properties:
+  compatible:
+    const: alphascale,asm9260-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: source clock, used for tick counter
+      - description: ahb gate
+
+  clock-names:
+    items:
+      - const: mod
+      - const: ahb
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: wdt_rst
+
+  alphascale,mode:
+    description: |
+      Specifies the reset mode of operation. If set to sw, then reset is handled
+      via interrupt request, if set to debug, then it does nothing and logs.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hw, sw, debug]
+    default: hw
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/alphascale,asm9260.h>
+    watchdog0: watchdog@80048000 {
+      compatible = "alphascale,asm9260-wdt";
+      reg = <0x80048000 0x10>;
+      clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
+      clock-names = "mod", "ahb";
+      interrupts = <55>;
+      timeout-sec = <30>;
+      alphascale,mode = "hw";
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
new file mode 100644
index 0000000000..443e2e7ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/amlogic,meson-gxbb-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Meson GXBB SoCs Watchdog timer
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxbb-wdt
+      - amlogic,t7-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      A phandle to the clock of this PHY
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@98d0 {
+        compatible = "amlogic,meson-gxbb-wdt";
+        reg = <0x98d0 0x10>;
+        clocks = <&xtal>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml
new file mode 100644
index 0000000000..84732cb58e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson6-wdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/amlogic,meson6-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 SoCs Watchdog timer
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson6-wdt
+          - amlogic,meson8-wdt
+          - amlogic,meson8b-wdt
+      - items:
+          - const: amlogic,meson8m2-wdt
+          - const: amlogic,meson8b-wdt
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    wdt: watchdog@c1109900 {
+        compatible = "amlogic,meson6-wdt";
+        reg = <0xc1109900 0x8>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+        timeout-sec = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
new file mode 100644
index 0000000000..929681127d
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/apple,wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Watchdog
+
+allOf:
+  - $ref: watchdog.yaml#
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-wdt
+          - apple,t8112-wdt
+          - apple,t6000-wdt
+      - const: apple,wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wdt: watchdog@50000000 {
+        compatible = "apple,t8103-wdt", "apple,wdt";
+        reg = <0x50000000 0x4000>;
+        clocks = <&clk>;
+        interrupts = <AIC_IRQ 123 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml b/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml
new file mode 100644
index 0000000000..aa804f96ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,sbsa-gwdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,sbsa-gwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBSA (Server Base System Architecture) Generic Watchdog
+
+maintainers:
+  - Fu Wei <fu.wei@linaro.org>
+
+description: |
+  The SBSA Generic Watchdog Timer is used to force a reset of the system after
+  two stages of timeout have elapsed. A detailed definition of the watchdog
+  timer can be found in the ARM document: ARM-DEN-0029 - Server Base System
+  Architecture (SBSA)
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: arm,sbsa-gwdt
+
+  reg:
+    items:
+      - description: Watchdog control frame
+      - description: Refresh frame
+
+  interrupts:
+    description: The Watchdog Signal 0 (WS0) SPI (Shared Peripheral Interrupt)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@2a440000 {
+        compatible = "arm,sbsa-gwdt";
+        reg = <0x2a440000 0x1000>,
+              <0x2a450000 0x1000>;
+        interrupts = <0 27 4>;
+        timeout-sec = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
new file mode 100644
index 0000000000..7aea255b30
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell SP805 Watchdog
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+
+description: |+
+  The Arm SP805 IP implements a watchdog device, which triggers an interrupt
+  after a configurable time period. If that interrupt has not been serviced
+  when the next interrupt would be triggered, the reset signal is asserted.
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp805
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp805
+      - const: arm,primecell
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clocks driving the watchdog timer hardware. The first clock is used
+      for the actual watchdog counter. The second clock drives the register
+      interface.
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: wdog_clk
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    watchdog@66090000 {
+        compatible = "arm,sp805", "arm,primecell";
+        reg = <0x66090000 0x1000>;
+        interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&wdt_clk>, <&apb_pclk>;
+        clock-names = "wdog_clk", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml
new file mode 100644
index 0000000000..9646ac7205
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,twd-wdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,twd-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Timer-Watchdog Watchdog
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
+  Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
+  and watchdog.
+
+  The TWD is usually attached to a GIC to deliver its two per-processor
+  interrupts.
+
+properties:
+  compatible:
+    enum:
+      - arm,cortex-a9-twd-wdt
+      - arm,cortex-a5-twd-wdt
+      - arm,arm11mp-twd-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@2c000620 {
+        compatible = "arm,arm11mp-twd-wdt";
+        reg = <0x2c000620 0x20>;
+        interrupts = <GIC_PPI 14 0xf01>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
new file mode 100644
index 0000000000..b5573852ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm-smc-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Secure Monitor Call based watchdog
+
+allOf:
+  - $ref: watchdog.yaml#
+
+maintainers:
+  - Julius Werner <jwerner@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - arm,smc-wdt
+
+  arm,smc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The ATF smc function id used by the firmware.
+      Defaults to 0x82003D06 if unset.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+        compatible = "arm,smc-wdt";
+        arm,smc-id = <0x82003D06>;
+        timeout-sec = <15>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
new file mode 100644
index 0000000000..a8d00c31a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
@@ -0,0 +1,23 @@
+* Armada 37xx CPU Watchdog Timer Controller
+
+Required properties:
+- compatible : must be "marvell,armada-3700-wdt"
+- reg : base physical address of the controller and length of memory mapped
+	region.
+- clocks : the clock feeding the watchdog timer. See clock-bindings.txt
+- marvell,system-controller : reference to syscon node for the CPU Miscellaneous
+	Registers
+
+Example:
+
+	cpu_misc: system-controller@d000 {
+		compatible = "marvell,armada-3700-cpu-misc", "syscon";
+		reg = <0xd000 0x1000>;
+	};
+
+	wdt: watchdog@8300 {
+		compatible = "marvell,armada-3700-wdt";
+		reg = <0x8300 0x40>;
+		marvell,system-controller = <&cpu_misc>;
+		clocks = <&xtalclk>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
new file mode 100644
index 0000000000..a8197632d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -0,0 +1,57 @@
+Aspeed Watchdog Timer
+
+Required properties:
+ - compatible: must be one of:
+	- "aspeed,ast2400-wdt"
+	- "aspeed,ast2500-wdt"
+	- "aspeed,ast2600-wdt"
+
+ - reg: physical base address of the controller and length of memory mapped
+   region
+
+Optional properties:
+
+ - aspeed,reset-type = "cpu|soc|system|none"
+
+   Reset behavior - Whenever a timeout occurs the watchdog can be programmed
+   to generate one of three different, mutually exclusive, types of resets.
+
+   Type "none" can be specified to indicate that no resets are to be done.
+   This is useful in situations where another watchdog engine on chip is
+   to perform the reset.
+
+   If 'aspeed,reset-type=' is not specified the default is to enable system
+   reset.
+
+   Reset types:
+
+        - cpu: Reset CPU on watchdog timeout
+
+        - soc: Reset 'System on Chip' on watchdog timeout
+
+        - system: Reset system on watchdog timeout
+
+        - none: No reset is performed on timeout. Assumes another watchdog
+                engine is responsible for this.
+
+ - aspeed,alt-boot:    If property is present then boot from alternate block.
+ - aspeed,external-signal: If property is present then signal is sent to
+			external reset counter (only WDT1 and WDT2). If not
+			specified no external signal is sent.
+ - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
+
+Optional properties for AST2500-compatible watchdogs:
+ - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
+			 drive type to push-pull. The default is open-drain.
+ - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
+			   is configured as push-pull, then set the pulse
+			   polarity to active-high. The default is active-low.
+
+Example:
+
+	wdt1: watchdog@1e785000 {
+		compatible = "aspeed,ast2400-wdt";
+		reg = <0x1e785000 0x1c>;
+		aspeed,reset-type = "system";
+		aspeed,external-signal;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml
new file mode 100644
index 0000000000..ad27bc5186
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,at91sam9-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Watchdog Timers
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9260-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  atmel,max-heartbeat-sec:
+    description:
+      Should contain the maximum heartbeat value in seconds. This value
+      should be less or equal to 16. It is used to compute the WDV field.
+    maximum: 16
+
+  atmel,min-heartbeat-sec:
+    description:
+      Should contain the minimum heartbeat value in seconds. This value
+      must be smaller than the max-heartbeat-sec value. It is used to
+      compute the WDD field.
+    maximum: 16
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should be hardware or software.
+    oneOf:
+      - description:
+          Hardware watchdog uses the at91 watchdog reset.
+        const: hardware
+      - description: |
+          Software watchdog uses the watchdog interrupt
+          to trigger a software reset.
+        const: software
+    default: hardware
+
+  atmel,reset-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should be proc or all. This is valid only when using hardware watchdog.
+    oneOf:
+      - description:
+          Assert peripherals and processor reset signals.
+        const: all
+      - description:
+          Assert the processor reset signal.
+        const: proc
+    default: all
+
+  atmel,disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Should be present if you want to stop the watchdog.
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Should be present if you want to stop the watchdog when
+      entering idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stops working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Should be present if you want to stop the watchdog when
+      entering debug state.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      properties:
+        atmel,reset-type:
+          enum:
+            - all
+            - proc
+    then:
+      properties:
+        atmel,watchdog-type:
+          const: hardware
+
+dependencies:
+  atmel,reset-type: ['atmel,watchdog-type']
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fffffd40 {
+        compatible = "atmel,at91sam9260-wdt";
+        reg = <0xfffffd40 0x10>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&clk32k>;
+        timeout-sec = <15>;
+        atmel,watchdog-type = "hardware";
+        atmel,reset-type = "all";
+        atmel,dbg-halt;
+        atmel,idle-halt;
+        atmel,max-heartbeat-sec = <16>;
+        atmel,min-heartbeat-sec = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
new file mode 100644
index 0000000000..816f85ee2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - atmel,sama5d4-wdt
+      - microchip,sam9x60-wdt
+      - microchip,sama7g5-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: should be hardware or software.
+    oneOf:
+      - description:
+          Enable watchdog fault reset. A watchdog fault triggers
+          watchdog reset.
+        const: hardware
+      - description:
+          Enable watchdog fault interrupt. A watchdog fault asserts
+          watchdog interrupt.
+        const: software
+    default: hardware
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stop working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fc068640 {
+        compatible = "atmel,sama5d4-wdt";
+        reg = <0xfc068640 0x10>;
+        interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+        timeout-sec = <10>;
+        atmel,watchdog-type = "hardware";
+        atmel,dbg-halt;
+        atmel,idle-halt;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt
new file mode 100644
index 0000000000..d4d86cf8f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-at91rm9200-wdt.txt
@@ -0,0 +1,9 @@
+Atmel AT91RM9200 System Timer Watchdog
+
+Required properties:
+- compatible: must be "atmel,at91sam9260-wdt".
+
+Example:
+	watchdog@fffffd00 {
+		compatible = "atmel,at91rm9200-wdt";
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt
new file mode 100644
index 0000000000..f801d71de1
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt
@@ -0,0 +1,18 @@
+BCM2835 Watchdog timer
+
+Required properties:
+
+- compatible : should be "brcm,bcm2835-pm-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Optional properties:
+
+- timeout-sec   : Contains the watchdog timeout in seconds
+
+Example:
+
+watchdog {
+	compatible = "brcm,bcm2835-pm-wdt";
+	reg = <0x7e100000 0x28>;
+	timeout-sec = <10>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
new file mode 100644
index 0000000000..526ff908d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx and BCM7038 watchdog timer
+
+allOf:
+  - $ref: watchdog.yaml#
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Justin Chen <justinpopo6@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-wdt
+      - brcm,bcm7038-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock running the watchdog. If no clock is found the driver will
+      default to 27000000 Hz.
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    watchdog@f040a7e8 {
+        compatible = "brcm,bcm7038-wdt";
+        reg = <0xf040a7e8 0x16>;
+        clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
new file mode 100644
index 0000000000..3d4403b41c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,kona-wdt.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,kona-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona Family Watchdog Timer
+
+description: |
+  This watchdog timer is used in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: brcm,bcm11351-wdt
+      - const: brcm,kona-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@35002f40 {
+        compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+        reg = <0x35002f40 0x6c>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml
new file mode 100644
index 0000000000..3c17c5883b
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cdns,wdt-r1p2.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/cdns,wdt-r1p2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence watchdog timer controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+  The cadence watchdog timer is used to detect and recover from
+  system malfunctions. This watchdog contains 24 bit counter and
+  a programmable reset period. The timeout period varies from 1 ms
+  to 30 seconds while using a 100Mhz clock.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cdns,wdt-r1p2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-on-timeout:
+    type: boolean
+    description: |
+      If this property exists, then a reset is done when watchdog
+      times out.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@f8005000 {
+        compatible = "cdns,wdt-r1p2";
+        reg = <0xf8005000 0x1000>;
+        clocks = <&clkc 45>;
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 9 IRQ_TYPE_EDGE_RISING>;
+        reset-on-timeout;
+        timeout-sec = <10>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
new file mode 100644
index 0000000000..354314d854
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -0,0 +1,34 @@
+* Dialog Semiconductor DA9062/61 Watchdog Timer
+
+Required properties:
+
+- compatible: should be one of the following valid compatible string lines:
+	"dlg,da9061-watchdog", "dlg,da9062-watchdog"
+	"dlg,da9062-watchdog"
+
+Optional properties:
+- dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
+	Only use this option if you can't use the watchdog automatic suspend
+	function during a suspend (see register CONTROL_B).
+- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the
+	watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers
+	POWERDOWN. Can be 0 or 1. Only use this option if you want to change the
+	default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT
+	set the WATCHDOG_SD bit and on timeout watchdog behavior will match the
+	chip's OTP settings.
+
+Example: DA9062
+
+	pmic0: da9062@58 {
+		watchdog {
+			compatible = "dlg,da9062-watchdog";
+		};
+	};
+
+Example: DA9061 using a fall-back compatible for the DA9062 watchdog driver
+
+	pmic0: da9061@58 {
+		watchdog {
+			compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
new file mode 100644
index 0000000000..aa10b8ec36
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -0,0 +1,24 @@
+Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible : Should be "ti,davinci-wdt", "ti,keystone-wdt"
+- reg : Should contain WDT registers location and length
+
+Optional properties:
+- timeout-sec : Contains the watchdog timeout in seconds
+- clocks : the clock feeding the watchdog timer.
+	   Needed if platform uses clocks.
+	   See clock-bindings.txt
+
+Documentation:
+Davinci DM646x - https://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - https://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+Examples:
+
+wdt: wdt@2320000 {
+	compatible = "ti,davinci-wdt";
+	reg = <0x02320000 0x80>;
+	timeout-sec = <30>;
+	clocks = <&clkwdtimer0>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt b/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt
new file mode 100644
index 0000000000..a882967e17
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt
@@ -0,0 +1,25 @@
+Conexant Digicolor SoCs Watchdog timer
+
+The watchdog functionality in Conexant Digicolor SoCs relies on the so called
+"Agent Communication" block. This block includes the eight programmable system
+timer counters. The first timer (called "Timer A") is the only one that can be
+used as watchdog.
+
+Required properties:
+
+- compatible : Should be "cnxt,cx92755-wdt"
+- reg : Specifies base physical address and size of the registers
+- clocks : phandle; specifies the clock that drives the timer
+
+Optional properties:
+
+- timeout-sec : Contains the watchdog timeout in seconds
+
+Example:
+
+	watchdog@f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml
new file mode 100644
index 0000000000..726dc872ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/faraday,ftwdt010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTWDT010 watchdog
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Corentin Labbe <clabbe@baylibre.com>
+
+description: |
+  This is an IP part from Faraday Technology found in the Gemini
+  SoCs and others.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftwdt010
+      - items:
+          - enum:
+              - cortina,gemini-watchdog
+              - moxa,moxart-watchdog
+          - const: faraday,ftwdt010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: PCLK
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    watchdog@41000000 {
+        compatible = "faraday,ftwdt010";
+        reg = <0x41000000 0x1000>;
+        interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        timeout-sec = <5>;
+    };
+  - |
+    watchdog: watchdog@98500000 {
+        compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
+        reg = <0x98500000 0x10>;
+        clocks = <&clk_apb>;
+        clock-names = "PCLK";
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
new file mode 100644
index 0000000000..47701248cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Watchdog Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-wdt
+      - const: fsl,imx-sc-wdt
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+        compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+        timeout-sec = <60>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
new file mode 100644
index 0000000000..181f0cc5b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl-imx-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx21-wdt
+      - items:
+          - enum:
+              - fsl,imx25-wdt
+              - fsl,imx27-wdt
+              - fsl,imx31-wdt
+              - fsl,imx35-wdt
+              - fsl,imx50-wdt
+              - fsl,imx51-wdt
+              - fsl,imx53-wdt
+              - fsl,imx6q-wdt
+              - fsl,imx6sl-wdt
+              - fsl,imx6sll-wdt
+              - fsl,imx6sx-wdt
+              - fsl,imx6ul-wdt
+              - fsl,imx7d-wdt
+              - fsl,imx8mm-wdt
+              - fsl,imx8mn-wdt
+              - fsl,imx8mp-wdt
+              - fsl,imx8mq-wdt
+              - fsl,ls1012a-wdt
+              - fsl,ls1043a-wdt
+              - fsl,vf610-wdt
+          - const: fsl,imx21-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  fsl,ext-reset-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If present, the watchdog device is configured to assert its
+      external reset (WDOG_B) instead of issuing a software reset.
+
+  fsl,suspend-in-wait:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      If present, the watchdog device is suspended in WAIT mode
+      (Suspend-to-Idle). Only supported on certain devices.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx25-wdt
+                - fsl,imx35-wdt
+                - fsl,imx50-wdt
+                - fsl,imx51-wdt
+                - fsl,imx53-wdt
+                - fsl,imx6q-wdt
+                - fsl,imx6sl-wdt
+                - fsl,imx6sll-wdt
+                - fsl,imx6sx-wdt
+                - fsl,imx6ul-wdt
+                - fsl,imx7d-wdt
+                - fsl,imx8mm-wdt
+                - fsl,imx8mn-wdt
+                - fsl,imx8mp-wdt
+                - fsl,imx8mq-wdt
+                - fsl,vf610-wdt
+    then:
+      properties:
+        fsl,suspend-in-wait: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    watchdog@20bc000 {
+        compatible = "fsl,imx21-wdt";
+        reg = <0x020bc000 0x4000>;
+        interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_IPG>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
new file mode 100644
index 0000000000..4b7ed13557
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl-imx7ulp-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX7ULP Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx7ulp-wdt
+      - items:
+          - const: fsl,imx8ulp-wdt
+          - const: fsl,imx7ulp-wdt
+      - const: fsl,imx93-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    watchdog@403d0000 {
+        compatible = "fsl,imx7ulp-wdt";
+        reg = <0x403d0000 0x10000>;
+        interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+        assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
+        assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+        timeout-sec = <40>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
new file mode 100644
index 0000000000..b2fa11fd43
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt
@@ -0,0 +1,19 @@
+*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
+
+Required properties:
+- compatible : Should be "img,pdc-wdt"
+- reg : Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdt" and "sys"; the watchdog counter
+               clock and register interface clock respectively.
+- interrupts : Should contain WDT interrupt
+
+Examples:
+
+watchdog@18102100 {
+	compatible = "img,pdc-wdt";
+	reg = <0x18102100 0x100>;
+	clocks = <&pdc_wdt_clk>, <&sys_clk>;
+	clock-names = "wdt", "sys";
+	interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml b/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
new file mode 100644
index 0000000000..1437ff8a12
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/intel,keembay-wdt.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/intel,keembay-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay SoC non-secure Watchdog Timer
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+  compatible:
+    enum:
+      - intel,keembay-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt specifier for threshold interrupt line
+      - description: interrupt specifier for timeout interrupt line
+
+  interrupt-names:
+    items:
+      - const: threshold
+      - const: timeout
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #define KEEM_BAY_A53_TIM
+
+    watchdog: watchdog@2033009c {
+        compatible = "intel,keembay-wdt";
+        reg = <0x2033009c 0x10>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "threshold", "timeout";
+        clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
new file mode 100644
index 0000000000..179272f74d
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see ../mfd/kontron,sl28cpld.yaml.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-wdt
+
+  reg:
+    maxItems: 1
+
+  kontron,assert-wdt-timeout-pin:
+    description: The SMARC standard defines a WDT_TIME_OUT# pin. If this
+      property is set, this output will be pulsed when the watchdog bites
+      and the system resets.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
new file mode 100644
index 0000000000..18d4d83027
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt
@@ -0,0 +1,24 @@
+Lantiq WTD watchdog binding
+============================
+
+This describes the binding of the Lantiq watchdog driver.
+
+-------------------------------------------------------------------------------
+Required properties:
+- compatible		: Should be one of
+				"lantiq,wdt"
+				"lantiq,xrx100-wdt"
+				"lantiq,xrx200-wdt", "lantiq,xrx100-wdt"
+				"lantiq,falcon-wdt"
+- reg			: Address of the watchdog block
+- lantiq,rcu		: A phandle to the RCU syscon (required for
+			  "lantiq,falcon-wdt" and "lantiq,xrx100-wdt")
+
+-------------------------------------------------------------------------------
+Example for the watchdog on the xRX200 SoCs:
+		watchdog@803f0 {
+			compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt";
+			reg = <0x803f0 0x10>;
+
+			lantiq,rcu = <&rcu0>;
+		};
diff --git a/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
new file mode 100644
index 0000000000..499f1b7e03
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/linux,wdt-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-controlled Watchdog
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  compatible:
+    const: linux,wdt-gpio
+
+  gpios:
+    description: gpio connection to WDT reset pin
+    maxItems: 1
+
+  hw_algo:
+    description: The algorithm used by the driver.
+    oneOf:
+      - description:
+          Either a high-to-low or a low-to-high transition clears the WDT counter.
+          The watchdog timer is disabled when GPIO is left floating or connected
+          to a three-state buffer.
+        const: toggle
+      - description:
+          Low or high level starts counting WDT timeout, the opposite level
+          disables the WDT.
+          Active level is determined by the GPIO flags.
+        const: level
+
+  hw_margin_ms:
+    description: Maximum time to reset watchdog circuit (milliseconds).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 65535
+
+  always-running:
+    type: boolean
+    description:
+      If the watchdog timer cannot be disabled, add this flag to have the driver
+      keep toggling the signal without a client.
+      It will only cease to toggle the signal when the device is open and the
+      timeout elapsed.
+
+required:
+  - compatible
+  - gpios
+  - hw_algo
+  - hw_margin_ms
+
+allOf:
+  - $ref: watchdog.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    watchdog {
+        compatible = "linux,wdt-gpio";
+        gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+        hw_algo = "toggle";
+        hw_margin_ms = <1600>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml
new file mode 100644
index 0000000000..81690d4b62
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Watchdog Timer
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls1b-wdt
+      - loongson,ls1c-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls1x-clk.h>
+    watchdog: watchdog@1fe5c060 {
+        compatible = "loongson,ls1b-wdt";
+        reg = <0x1fe5c060 0xc>;
+
+        clocks = <&clkc LS1X_CLKID_APB>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
new file mode 100644
index 0000000000..09f6b24969
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
@@ -0,0 +1,19 @@
+* NXP LPC18xx Watchdog Timer (WDT)
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-wwdt"
+- reg: Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter
+               clock and register interface clock respectively.
+- interrupts: Should contain WDT interrupt
+
+Examples:
+
+watchdog@40080000 {
+	compatible = "nxp,lpc1850-wwdt";
+	reg = <0x40080000 0x24>;
+	clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+	clock-names = "wdtclk", "reg";
+	interrupts = <49>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
new file mode 100644
index 0000000000..c1b67a78f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -0,0 +1,45 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+		  "marvell,armada-370-wdt"
+		  "marvell,armada-xp-wdt"
+		  "marvell,armada-375-wdt"
+		  "marvell,armada-380-wdt"
+
+- reg		: Should contain two entries: first one with the
+		  timer control address, second one with the
+		  rstout enable address.
+
+For "marvell,armada-375-wdt" and "marvell,armada-380-wdt":
+
+- reg		: A third entry is mandatory and should contain the
+                  shared mask/unmask RSTOUT address.
+
+Clocks required for compatibles = "marvell,orion-wdt",
+				  "marvell,armada-370-wdt":
+- clocks : Must contain a single entry describing the clock input
+
+Clocks required for compatibles = "marvell,armada-xp-wdt"
+				  "marvell,armada-375-wdt"
+				  "marvell,armada-380-wdt":
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "nbclk" (L2/coherency fabric clock),
+  "fixed" (Reference 25 MHz fixed-clock).
+
+Optional properties:
+
+- interrupts	: Contains the IRQ for watchdog expiration
+- timeout-sec	: Contains the watchdog timeout in seconds
+
+Example:
+
+	wdt@20300 {
+		compatible = "marvell,orion-wdt";
+		reg = <0x20300 0x28>, <0x20108 0x4>;
+		interrupts = <3>;
+		timeout-sec = <10>;
+		clocks = <&gate_clk 7>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/marvell,cn10624-wdt.yaml b/Documentation/devicetree/bindings/watchdog/marvell,cn10624-wdt.yaml
new file mode 100644
index 0000000000..1b583f232e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvell,cn10624-wdt.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/marvell,cn10624-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Global Timer (GTI) system watchdog
+
+maintainers:
+  - Bharat Bhushan <bbhushan2@marvell.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,cn9670-wdt
+          - marvell,cn10624-wdt
+
+      - items:
+          - enum:
+              - marvell,cn9880-wdt
+              - marvell,cnf9535-wdt
+          - const: marvell,cn9670-wdt
+
+      - items:
+          - enum:
+              - marvell,cn10308-wdt
+              - marvell,cnf10518-wdt
+          - const: marvell,cn10624-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: refclk
+
+  marvell,wdt-timer-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 63
+    description:
+      An SoC have many timers (up to 64), firmware can reserve one or more timer
+      for some other use case and configures one of the global timer as watchdog
+      timer. Firmware will update this field with the timer number configured
+      as watchdog timer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        watchdog@802000040000 {
+            compatible = "marvell,cn9670-wdt";
+            reg = <0x00008020 0x00040000 0x00000000 0x00020000>;
+            interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&sclk>;
+            clock-names = "refclk";
+            marvell,wdt-timer-index = <63>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
new file mode 100644
index 0000000000..1a6490c43d
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/maxim,max63xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 63xx Watchdog Timers
+
+allOf:
+  - $ref: watchdog.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6369
+      - maxim,max6370
+      - maxim,max6371
+      - maxim,max6372
+      - maxim,max6373
+      - maxim,max6374
+
+  reg:
+    description: This is a 1-byte memory-mapped address
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    wdt: watchdog@50000000 {
+        compatible = "maxim,max6369";
+        reg = <0x50000000 0x1>;
+        timeout-sec = <10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml
new file mode 100644
index 0000000000..18160869c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mediatek,mt7621-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink Watchdog Timers
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-wdt
+
+  reg:
+    maxItems: 1
+
+  mediatek,sysctl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to system controller 'sysc' syscon node which
+      controls system registers
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog@100 {
+        compatible = "mediatek,mt7621-wdt";
+        reg = <0x100 0x100>;
+        mediatek,sysctl = <&sysc>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
new file mode 100644
index 0000000000..cc502838bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mediatek,mtk-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoCs Watchdog timer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The watchdog supports a pre-timeout interrupt that fires
+  timeout-sec/2 before the expiry.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2712-wdt
+          - mediatek,mt6589-wdt
+          - mediatek,mt6735-wdt
+          - mediatek,mt6795-wdt
+          - mediatek,mt7986-wdt
+          - mediatek,mt8183-wdt
+          - mediatek,mt8186-wdt
+          - mediatek,mt8188-wdt
+          - mediatek,mt8192-wdt
+          - mediatek,mt8195-wdt
+      - items:
+          - enum:
+              - mediatek,mt2701-wdt
+              - mediatek,mt6582-wdt
+              - mediatek,mt6797-wdt
+              - mediatek,mt7622-wdt
+              - mediatek,mt7623-wdt
+              - mediatek,mt7629-wdt
+              - mediatek,mt8173-wdt
+              - mediatek,mt8365-wdt
+              - mediatek,mt8516-wdt
+          - const: mediatek,mt6589-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Watchdog pre-timeout (bark) interrupt
+
+  mediatek,disable-extrst:
+    description: Disable sending output reset signal
+    type: boolean
+
+  mediatek,reset-by-toprgu:
+    description: The Top Reset Generation Unit (TOPRGU) generates reset signals
+      and distributes them to each IP. If present, the watchdog timer will be
+      reset by TOPRGU once system resets.
+    type: boolean
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        watchdog: watchdog@10007000 {
+            compatible = "mediatek,mt8183-wdt";
+            reg = <0 0x10007000 0 0x100>;
+            interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+            mediatek,disable-extrst;
+            timeout-sec = <10>;
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/men-a021-wdt.txt b/Documentation/devicetree/bindings/watchdog/men-a021-wdt.txt
new file mode 100644
index 0000000000..370dee3226
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/men-a021-wdt.txt
@@ -0,0 +1,25 @@
+Bindings for MEN A21 Watchdog device connected to GPIO lines
+
+Required properties:
+- compatible: "men,a021-wdt"
+- gpios: Specifies the pins that control the Watchdog, order:
+  1: Watchdog enable
+  2: Watchdog fast-mode
+  3: Watchdog trigger
+  4: Watchdog reset cause bit 0
+  5: Watchdog reset cause bit 1
+  6: Watchdog reset cause bit 2
+
+Optional properties:
+- None
+
+Example:
+	watchdog {
+		compatible ="men,a021-wdt";
+		gpios = <&gpio3 9  1	/* WD_EN */
+			 &gpio3 10 1	/* WD_FAST */
+			 &gpio3 11 1	/* WD_TRIG */
+			 &gpio3 6  1	/* RST_CAUSE[0] */
+			 &gpio3 7  1	/* RST_CAUSE[1] */
+			 &gpio3 8  1>;	/* RST_CAUSE[2] */
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
new file mode 100644
index 0000000000..49485f8313
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
@@ -0,0 +1,19 @@
+* Microchip PIC32 Deadman Timer
+
+The deadman timer is used to reset the processor in the event of a software
+malfunction. It is a free-running instruction fetch timer, which is clocked
+whenever an instruction fetch occurs until a count match occurs.
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-dmt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: phandle of source clk. Should be <&rootclk PB7CLK>.
+
+Example:
+
+	watchdog@1f800a00 {
+		compatible = "microchip,pic32mzda-dmt";
+		reg = <0x1f800a00 0x80>;
+		clocks = <&rootclk PB7CLK>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
new file mode 100644
index 0000000000..f03a29a1b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
@@ -0,0 +1,18 @@
+* Microchip PIC32 Watchdog Timer
+
+When enabled, the watchdog peripheral can be used to reset the device if the
+WDT is not cleared periodically in software.
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-wdt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: phandle of source clk. Should be <&rootclk LPRCCLK>.
+
+Example:
+
+	watchdog@1f800800 {
+		compatible = "microchip,pic32mzda-wdt";
+		reg = <0x1f800800 0x200>;
+		clocks = <&rootclk LPRCCLK>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
new file mode 100644
index 0000000000..1169857d1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/moxa,moxart-watchdog.txt
@@ -0,0 +1,15 @@
+MOXA ART Watchdog timer
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-watchdog"
+- reg : Should contain registers location and length
+- clocks : Should contain phandle for the clock that drives the counter
+
+Example:
+
+	watchdog: watchdog@98500000 {
+		compatible = "moxa,moxart-watchdog";
+		reg = <0x98500000 0x10>;
+		clocks = <&coreclk>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt b/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt
new file mode 100644
index 0000000000..a384ff5b3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mpc8xxx-wdt.txt
@@ -0,0 +1,25 @@
+* Freescale mpc8xxx watchdog driver (For 83xx, 86xx and 8xx)
+
+Required properties:
+- compatible: Shall contain one of the following:
+	"mpc83xx_wdt" for an mpc83xx
+	"fsl,mpc8610-wdt" for an mpc86xx
+	"fsl,mpc823-wdt" for an mpc8xx
+- reg: base physical address and length of the area hosting the
+       watchdog registers.
+		On the 83xx, "Watchdog Timer Registers" area:	<0x200 0x100>
+		On the 86xx, "Watchdog Timer Registers" area:	<0xe4000 0x100>
+		On the 8xx, "General System Interface Unit" area: <0x0 0x10>
+
+Optional properties:
+- reg: additional physical address and length (4) of location of the
+       Reset Status Register (called RSTRSCR on the mpc86xx)
+		On the 83xx, it is located at offset 0x910
+		On the 86xx, it is located at offset 0xe0094
+		On the 8xx, it is located at offset 0x288
+
+Example:
+		WDT: watchdog@0 {
+		    compatible = "fsl,mpc823-wdt";
+		    reg = <0x0 0x10 0x288 0x4>;
+		};
diff --git a/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
new file mode 100644
index 0000000000..33794711c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mstar,msc313e-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar Watchdog
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@6000 {
+        compatible = "mstar,msc313e-wdt";
+        reg = <0x6000 0x1f>;
+        clocks = <&xtal_div2>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
new file mode 100644
index 0000000000..866a958b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
@@ -0,0 +1,30 @@
+Nuvoton NPCM Watchdog
+
+Nuvoton NPCM timer module provides five 24-bit timer counters, and a watchdog.
+The watchdog supports a pre-timeout interrupt that fires 10ms before the
+expiry.
+
+Required properties:
+- compatible      : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
+                    "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
+                    "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
+- reg             : Offset and length of the register set for the device.
+- interrupts      : Contain the timer interrupt with flags for
+                    falling edge.
+
+Required clocking property, have to be one of:
+- clocks          : phandle of timer reference clock.
+- clock-frequency : The frequency in Hz of the clock that drives the NPCM7xx
+                    timer (usually 25000000).
+
+Optional properties:
+- timeout-sec : Contains the watchdog timeout in seconds
+
+Example:
+
+timer@f000801c {
+    compatible = "nuvoton,npcm750-wdt";
+    interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+    reg = <0xf000801c 0x4>;
+    clocks = <&clk NPCM7XX_CLK_TIMER>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
new file mode 100644
index 0000000000..1fa20e453a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
@@ -0,0 +1,15 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+- compatible : "ti,omap3-wdt" for OMAP3 or "ti,omap4-wdt" for OMAP4
+- ti,hwmods : Name of the hwmod associated to the WDT
+
+Optional properties:
+- timeout-sec : default watchdog timeout in seconds
+
+Examples:
+
+wdt2: wdt@4a314000 {
+	compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+	ti,hwmods = "wd_timer2";
+};
diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
new file mode 100644
index 0000000000..4b76bec62a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -0,0 +1,17 @@
+* NXP PNX watchdog timer
+
+Required properties:
+- compatible: must be "nxp,pnx4008-wdt"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+	watchdog@4003c000 {
+		compatible = "nxp,pnx4008-wdt";
+		reg = <0x4003C000 0x1000>;
+		timeout-sec = <10>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt b/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt
new file mode 100644
index 0000000000..7a89e5f854
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qca-ar7130-wdt.txt
@@ -0,0 +1,13 @@
+* Qualcomm Atheros AR7130 Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible: must be "qca,ar7130-wdt"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+Example:
+
+wdt@18060008 {
+	compatible = "qca,ar9330-wdt", "qca,ar7130-wdt";
+	reg = <0x18060008 0x8>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
new file mode 100644
index 0000000000..568eb8480f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qcom,pm8916-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8916 watchdog timer controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: qcom,pm8916-wdt
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm8916", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8916-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            watchdog {
+                compatible = "qcom,pm8916-wdt";
+                interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+                timeout-sec = <60>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
new file mode 100644
index 0000000000..5046dfa55f
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qcom-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer
+
+maintainers:
+  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
+
+properties:
+  $nodename:
+    pattern: "^(watchdog|timer)@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,kpss-wdt-ipq4019
+              - qcom,apss-wdt-ipq5018
+              - qcom,apss-wdt-ipq5332
+              - qcom,apss-wdt-ipq9574
+              - qcom,apss-wdt-msm8994
+              - qcom,apss-wdt-qcm2290
+              - qcom,apss-wdt-qcs404
+              - qcom,apss-wdt-sa8775p
+              - qcom,apss-wdt-sc7180
+              - qcom,apss-wdt-sc7280
+              - qcom,apss-wdt-sc8180x
+              - qcom,apss-wdt-sc8280xp
+              - qcom,apss-wdt-sdm845
+              - qcom,apss-wdt-sdx55
+              - qcom,apss-wdt-sdx65
+              - qcom,apss-wdt-sm6115
+              - qcom,apss-wdt-sm6350
+              - qcom,apss-wdt-sm8150
+              - qcom,apss-wdt-sm8250
+          - const: qcom,kpss-wdt
+      - const: qcom,kpss-wdt
+        deprecated: true
+      - items:
+          - const: qcom,scss-timer
+          - const: qcom,msm-timer
+      - items:
+          - enum:
+              - qcom,kpss-wdt-apq8064
+              - qcom,kpss-wdt-ipq8064
+              - qcom,kpss-wdt-mdm9615
+              - qcom,kpss-wdt-msm8960
+          - const: qcom,kpss-timer
+          - const: qcom,msm-timer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sleep
+
+  clock-frequency:
+    description:
+      The frequency of the general purpose timer in Hz.
+
+  cpu-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Per-CPU offset used when the timer is accessed without the CPU remapping
+      facilities. The offset is cpu-offset + (0x10000 * cpu-nr).
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,kpss-wdt
+    then:
+      properties:
+        clock-frequency: false
+        cpu-offset: false
+        interrupts:
+          minItems: 1
+          items:
+            - description: Bark
+            - description: Bite
+
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+          items:
+            - description: Debug
+            - description: First general purpose timer
+            - description: Second general purpose timer
+            - description: First watchdog
+            - description: Second watchdog
+      required:
+        - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@17c10000 {
+        compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+        reg = <0x17c10000 0x1000>;
+        clocks = <&sleep_clk>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        timeout-sec = <10>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@200a000 {
+        compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", "qcom,msm-timer";
+        interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+        reg = <0x0200a000 0x100>;
+        clock-frequency = <25000000>;
+        clocks = <&sleep_clk>;
+        clock-names = "sleep";
+        cpu-offset = <0x80000>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/ralink,rt2880-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ralink,rt2880-wdt.yaml
new file mode 100644
index 0000000000..51e00de947
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ralink,rt2880-wdt.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/ralink,rt2880-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink Watchdog Timers
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: ralink,rt2880-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@100 {
+      compatible = "ralink,rt2880-wdt";
+      reg = <0x120 0x10>;
+      clocks = <&clkref>;
+      resets = <&rstctrl 8>;
+      interrupt-parent = <&intc>;
+      interrupts = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
new file mode 100644
index 0000000000..1f5390a67c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,otto-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto watchdog timer
+
+maintainers:
+  - Sander Vanheule <sander@svanheule.net>
+
+description: |
+  The timer has two timeout phases. Both phases have a maximum duration of 32
+  prescaled clock ticks, which is ca. 43s with a bus clock of 200MHz. The
+  minimum duration of each phase is one tick. Each phase can trigger an
+  interrupt, although the phase 2 interrupt will occur with the system reset.
+  - Phase 1: During this phase, the WDT can be pinged to reset the timeout.
+  - Phase 2: Starts after phase 1 has timed out, and only serves to give the
+    system some time to clean up, or notify others that it's going to reset.
+    During this phase, pinging the WDT has no effect, and a reset is
+    unavoidable, unless the WDT is disabled.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8380-wdt
+      - realtek,rtl8390-wdt
+      - realtek,rtl9300-wdt
+      - realtek,rtl9310-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt specifier for pretimeout
+      - description: interrupt specifier for timeout
+
+  interrupt-names:
+    items:
+      - const: phase1
+      - const: phase2
+
+  realtek,reset-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Specify how the system is reset after a timeout. Defaults to "cpu" if
+      left unspecified.
+    oneOf:
+      - description: Reset the entire chip
+        const: soc
+      - description: |
+          Reset the CPU and IPsec engine, but leave other peripherals untouched
+        const: cpu
+      - description: |
+          Reset the execution pointer, but don't actually reset any hardware
+        const: software
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog: watchdog@3150 {
+        compatible = "realtek,rtl8380-wdt";
+        reg = <0x3150 0xc>;
+
+        realtek,reset-mode = "soc";
+
+        clocks = <&lxbus_clock>;
+        timeout-sec = <20>;
+
+        interrupt-parent = <&rtlintc>;
+        interrupt-names = "phase1", "phase2";
+        interrupts = <19>, <18>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
new file mode 100644
index 0000000000..05653054bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
@@ -0,0 +1,17 @@
+Realtek RTD1295 Watchdog
+========================
+
+Required properties:
+
+- compatible :  Should be "realtek,rtd1295-watchdog"
+- reg        :  Specifies the physical base address and size of registers
+- clocks     :  Specifies one clock input
+
+
+Example:
+
+	watchdog@98007680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x98007680 0x100>;
+		clocks = <&osc27M>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
new file mode 100644
index 0000000000..951a7d5413
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/renesas,wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Watchdog Timer (WDT) Controller
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r7s72100-wdt     # RZ/A1
+              - renesas,r7s9210-wdt      # RZ/A2
+          - const: renesas,rza-wdt       # RZ/A
+
+      - items:
+          - enum:
+              - renesas,r9a06g032-wdt    # RZ/N1D
+          - const: renesas,rzn1-wdt      # RZ/N1
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-wdt    # RZ/G2UL and RZ/Five
+              - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
+              - renesas,r9a07g054-wdt    # RZ/V2L
+          - const: renesas,rzg2l-wdt
+
+      - items:
+          - enum:
+              - renesas,r9a09g011-wdt    # RZ/V2M
+          - const: renesas,rzv2m-wdt     # RZ/V2M
+
+      - items:
+          - enum:
+              - renesas,r8a7742-wdt      # RZ/G1H
+              - renesas,r8a7743-wdt      # RZ/G1M
+              - renesas,r8a7744-wdt      # RZ/G1N
+              - renesas,r8a7745-wdt      # RZ/G1E
+              - renesas,r8a77470-wdt     # RZ/G1C
+              - renesas,r8a7790-wdt      # R-Car H2
+              - renesas,r8a7791-wdt      # R-Car M2-W
+              - renesas,r8a7792-wdt      # R-Car V2H
+              - renesas,r8a7793-wdt      # R-Car M2-N
+              - renesas,r8a7794-wdt      # R-Car E2
+          - const: renesas,rcar-gen2-wdt # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-wdt     # RZ/G2M
+              - renesas,r8a774b1-wdt     # RZ/G2N
+              - renesas,r8a774c0-wdt     # RZ/G2E
+              - renesas,r8a774e1-wdt     # RZ/G2H
+              - renesas,r8a7795-wdt      # R-Car H3
+              - renesas,r8a7796-wdt      # R-Car M3-W
+              - renesas,r8a77961-wdt     # R-Car M3-W+
+              - renesas,r8a77965-wdt     # R-Car M3-N
+              - renesas,r8a77970-wdt     # R-Car V3M
+              - renesas,r8a77980-wdt     # R-Car V3H
+              - renesas,r8a77990-wdt     # R-Car E3
+              - renesas,r8a77995-wdt     # R-Car D3
+          - const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-wdt     # R-Car V3U
+              - renesas,r8a779f0-wdt     # R-Car S4-8
+              - renesas,r8a779g0-wdt     # R-Car V4H
+          - const: renesas,rcar-gen4-wdt # R-Car Gen4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Timeout
+      - description: Parity error
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: wdt
+      - const: perrout
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Register access clock
+      - description: Main clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: oscclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: watchdog.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rza-wdt
+                - renesas,rzn1-wdt
+    then:
+      required:
+        - power-domains
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+              - renesas,rzv2m-wdt
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+        interrupt-names:
+          minItems: 2
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    wdt0: watchdog@e6020000 {
+        compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+        reg = <0xe6020000 0x0c>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 402>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 402>;
+        timeout-sec = <60>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
new file mode 100644
index 0000000000..8fb6656ba0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/samsung-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC Watchdog Timer Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  The Samsung's Watchdog controller is used for resuming system operation
+  after a preset amount of time during which the WDT reset event has not
+  occurred.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-wdt                   # for S3C2410
+      - samsung,s3c6410-wdt                   # for S3C6410, S5PV210 and Exynos4
+      - samsung,exynos5250-wdt                # for Exynos5250
+      - samsung,exynos5420-wdt                # for Exynos5420
+      - samsung,exynos7-wdt                   # for Exynos7
+      - samsung,exynos850-wdt                 # for Exynos850
+      - samsung,exynosautov9-wdt              # for Exynosautov9
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  samsung,cluster-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Index of CPU cluster on which watchdog is running (in case of Exynos850)
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420, Exynos7 and Exynos850).
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-wdt
+              - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
+              - samsung,exynos850-wdt
+              - samsung,exynosautov9-wdt
+    then:
+      required:
+        - samsung,syscon-phandle
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wdt
+              - samsung,exynosautov9-wdt
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, used for register interface
+            - description: Source clock (driving watchdog counter)
+        clock-names:
+          items:
+            - const: watchdog
+            - const: watchdog_src
+        samsung,cluster-index:
+          enum: [0, 1]
+      required:
+        - samsung,cluster-index
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, which is also a source clock
+        clock-names:
+          items:
+            - const: watchdog
+        samsung,cluster-index: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@101d0000 {
+        compatible = "samsung,exynos5250-wdt";
+        reg = <0x101D0000 0x100>;
+        interrupts = <0 42 0>;
+        clocks = <&clock 336>;
+        clock-names = "watchdog";
+        samsung,syscon-phandle = <&pmu_syscon>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
new file mode 100644
index 0000000000..76eceeddd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/snps,dw-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Watchdog Timer
+
+allOf:
+  - $ref: watchdog.yaml#
+
+maintainers:
+  - Jamie Iles <jamie@jamieiles.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dw-wdt
+      - items:
+          - enum:
+              - rockchip,px30-wdt
+              - rockchip,rk3066-wdt
+              - rockchip,rk3128-wdt
+              - rockchip,rk3188-wdt
+              - rockchip,rk3228-wdt
+              - rockchip,rk3288-wdt
+              - rockchip,rk3308-wdt
+              - rockchip,rk3328-wdt
+              - rockchip,rk3368-wdt
+              - rockchip,rk3399-wdt
+              - rockchip,rk3568-wdt
+              - rockchip,rk3588-wdt
+              - rockchip,rv1108-wdt
+          - const: snps,dw-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: DW Watchdog pre-timeout interrupt
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Watchdog timer reference clock
+      - description: APB3 interface clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: tclk
+      - const: pclk
+
+  resets:
+    description: Phandle to the DW Watchdog reset lane
+    maxItems: 1
+
+  snps,watchdog-tops:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      DW APB Watchdog custom timer intervals - Timeout Period ranges (TOPs).
+      Each TOP is a number loaded into the watchdog counter at the moment of
+      the timer restart. The counter decrementing happens each tick of the
+      reference clock. Therefore the TOPs array is equivalent to an array of
+      the timer expiration intervals supported by the DW APB Watchdog. Note
+      DW APB Watchdog IP-core might be synthesized with fixed TOP values,
+      in which case this property is unnecessary with default TOPs utilized.
+    default: [0x0001000 0x0002000 0x0004000 0x0008000
+      0x0010000 0x0020000 0x0040000 0x0080000
+      0x0100000 0x0200000 0x0400000 0x0800000
+      0x1000000 0x2000000 0x4000000 0x8000000]
+    minItems: 16
+    maxItems: 16
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    watchdog@ffd02000 {
+        compatible = "snps,dw-wdt";
+        reg = <0xffd02000 0x1000>;
+        interrupts = <0 171 4>;
+        clocks = <&per_base_clk>;
+        resets = <&wdt_rst>;
+    };
+
+  - |
+    watchdog@ffd02000 {
+        compatible = "snps,dw-wdt";
+        reg = <0xffd02000 0x1000>;
+        interrupts = <0 171 4>;
+        clocks = <&per_base_clk>;
+        clock-names = "tclk";
+        snps,watchdog-tops = <0x000000FF 0x000001FF 0x000003FF
+                              0x000007FF 0x0000FFFF 0x0001FFFF
+                              0x0003FFFF 0x0007FFFF 0x000FFFFF
+                              0x001FFFFF 0x003FFFFF 0x007FFFFF
+                              0x00FFFFFF 0x01FFFFFF 0x03FFFFFF
+                              0x07FFFFFF>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
new file mode 100644
index 0000000000..ba07093143
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/socionext,uniphier-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier watchdog timer
+
+maintainers:
+  - Keiji Hayashibara <hayashibara.keiji@socionext.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: socionext,uniphier-wdt
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // The UniPhier watchdog should be a subnode of a "syscon" compatible node.
+
+    watchdog {
+        compatible = "socionext,uniphier-wdt";
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
new file mode 100644
index 0000000000..aeaf3e0caf
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
@@ -0,0 +1,19 @@
+Spreadtrum SoCs Watchdog timer
+
+Required properties:
+- compatible : Should be "sprd,sp9860-wdt".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : Exactly one interrupt specifier.
+- timeout-sec : Contain the default watchdog timeout in seconds.
+- clock-names : Contain the input clock names.
+- clocks : Phandles to input clocks.
+
+Example:
+	watchdog: watchdog@40310000 {
+		compatible = "sprd,sp9860-wdt";
+		reg = <0 0x40310000 0 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		timeout-sec = <12>;
+		clock-names = "enable", "rtc_enable";
+		clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
new file mode 100644
index 0000000000..6b13bfc11e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/st,stm32-iwdg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Independent WatchDoG (IWDG)
+
+maintainers:
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32-iwdg
+      - st,stm32mp1-iwdg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Low speed clock
+      - description: Optional peripheral clock
+    minItems: 1
+
+  clock-names:
+    items:
+      enum:
+        - lsi
+        - pclk
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    watchdog@5a002000 {
+        compatible = "st,stm32mp1-iwdg";
+        reg = <0x5a002000 0x400>;
+        clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+        clock-names = "pclk", "lsi";
+        timeout-sec = <32>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
new file mode 100644
index 0000000000..b949039bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt
@@ -0,0 +1,41 @@
+STMicroelectronics Low Power Controller (LPC) - Watchdog
+========================================================
+
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
+
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
+
+Required properties
+
+- compatible 	: Should be: "st,stih407-lpc"
+- reg		: LPC registers base address + size
+- interrupts    : LPC interrupt line number and associated flags
+- clocks	: Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode	: The LPC can run either one of three modes:
+                  ST_LPC_MODE_RTC    [0]
+                  ST_LPC_MODE_WDT    [1]
+                  ST_LPC_MODE_CLKSRC [2]
+		 One (and only one) mode must be selected.
+
+Required properties [watchdog mode]
+
+- st,syscfg	: Phandle to syscfg node used to enable watchdog and configure
+		  CPU reset type.
+- timeout-sec	: Watchdog timeout in seconds
+
+Optional properties [watchdog mode]
+
+- st,warm-reset	: If present reset type will be 'warm' - if not it will be cold
+
+Example:
+	lpc@fde05000 {
+		compatible	= "st,stih407-lpc";
+		reg		= <0xfde05000 0x1000>;
+		clocks 		= <&clk_s_d3_flexgen CLK_LPC_0>;
+		st,syscfg	= <&syscfg_core>;
+		timeout-sec	= <120>;
+		st,lpc-mode	= <ST_LPC_MODE_WDT>;
+		st,warm-reset;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
new file mode 100644
index 0000000000..68f3f6fd08
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/starfive,jh7100-wdt.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/starfive,jh7100-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Watchdog for JH7100 and JH7110 SoC
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+  - Samin Guo <samin.guo@starfivetech.com>
+
+description:
+  The JH7100 and JH7110 watchdog both are 32 bit counters. JH7100 watchdog
+  has only one timeout phase and reboots. And JH7110 watchdog has two
+  timeout phases. At the first phase, the signal of watchdog interrupt
+  output(WDOGINT) will rise when counter is 0. The counter will reload
+  the timeout value. And then, if counter decreases to 0 again and WDOGINT
+  isn't cleared, the watchdog will reset the system unless the watchdog
+  reset is disabled.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-wdt
+      - starfive,jh7110-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB clock
+      - description: Core clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: core
+
+  resets:
+    items:
+      - description: APB reset
+      - description: Core reset
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@12480000 {
+        compatible = "starfive,jh7100-wdt";
+        reg = <0x12480000 0x10000>;
+        clocks = <&clk 171>,
+                 <&clk 172>;
+        clock-names = "apb", "core";
+        resets = <&rst 99>,
+                 <&rst 100>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml b/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
new file mode 100644
index 0000000000..d902710131
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/sunplus,sp7021-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoCs Watchdog
+
+maintainers:
+  - XianTao Hu <xt.hu@cqplus1.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-wdt
+
+  reg:
+    items:
+      - description: watchdog registers regions
+      - description: miscellaneous control registers regions
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog: watchdog@9c000630 {
+        compatible = "sunplus,sp7021-wdt";
+        reg = <0x9c000630 0x08>, <0x9c000274 0x04>;
+        clocks = <&clkc 0x24>;
+        resets = <&rstc 0x14>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
new file mode 100644
index 0000000000..62ddc284a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/ti,rti-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 SoC Watchdog Timer
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+
+description:
+  The TI K3 SoC watchdog timer is implemented via the RTI (Real Time
+  Interrupt) IP module. This timer adds a support for windowed watchdog
+  mode, which will signal an error if it is pinged outside the watchdog
+  time window, meaning either too early or too late. The error signal
+  generated can be routed to either interrupt a safety controller or
+  to directly reset the SoC.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,j7-rti-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description:
+      Contains the watchdog reserved memory. It is optional.
+      In the reserved memory, the specified values, which are
+      PON_REASON_SOF_NUM(0xBBBBCCCC), PON_REASON_MAGIC_NUM(0xDDDDDDDD),
+      and PON_REASON_EOF_NUM(0xCCCCBBBB), are pre-stored at the first
+      3 * 4 bytes to tell that last boot was caused by watchdog reset.
+      Once the PON reason is captured by driver(rti_wdt.c), the driver
+      is supposed to wipe the whole memory region. Surely, if this
+      property is set, at least 12 bytes reserved memory starting from
+      specific memory address(0xa220000) should be set. More please
+      refer to example.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     * RTI WDT in main domain on J721e SoC. Assigned clocks are used to
+     * select the source clock for the watchdog, forcing it to tick with
+     * a 32kHz clock in this case. Add a reserved memory(optional) to keep
+     * the watchdog reset cause persistent, which was be written in 12 bytes
+     * starting from 0xa2200000 by RTI Watchdog Firmware, then make it
+     * possible to get watchdog reset cause in driver.
+     *
+     * Reserved memory should be defined as follows:
+     * reserved-memory {
+     *     wdt_reset_memory_region: wdt-memory@a2200000 {
+     *         reg = <0x00 0xa2200000 0x00 0x1000>;
+     *         no-map;
+     *     };
+     * }
+     */
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    watchdog@2200000 {
+        compatible = "ti,j7-rti-wdt";
+        reg = <0x2200000 0x100>;
+        clocks = <&k3_clks 252 1>;
+        power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+        assigned-clocks = <&k3_clks 252 1>;
+        assigned-clock-parents = <&k3_clks 252 5>;
+        memory-region = <&wdt_reset_memory_region>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
new file mode 100644
index 0000000000..3e9fd49d93
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Toshiba Electronic Devices & Storage Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/toshiba,visconti-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti SoCs PIUWDT Watchdog timer
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - toshiba,visconti-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdt: watchdog@28330000 {
+            compatible = "toshiba,visconti-wdt";
+            reg = <0 0x28330000 0 0x1000>;
+            timeout-sec = <20>;
+            clocks = <&pismu TMPV770X_CLK_WDTCLK>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
new file mode 100644
index 0000000000..8f6caad425
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
@@ -0,0 +1,25 @@
+Technologic Systems Watchdog
+
+Required properties:
+- compatible: must be "technologic,ts4800-wdt"
+- syscon: phandle / integer array that points to the syscon node which
+          describes the FPGA's syscon registers.
+          - phandle to FPGA's syscon
+          - offset to the watchdog register
+
+Optional property:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+syscon: syscon@b0010000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0xb0010000 0x3d>;
+	reg-io-width = <2>;
+
+	wdt@e {
+		compatible = "technologic,ts4800-wdt";
+		syscon = <&syscon 0xe>;
+		timeout-sec = <10>;
+	};
+}
diff --git a/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt
new file mode 100644
index 0000000000..80a37193c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/twl4030-wdt.txt
@@ -0,0 +1,10 @@
+Device tree bindings for twl4030-wdt driver (TWL4030 watchdog)
+
+Required properties:
+	compatible = "ti,twl4030-wdt";
+
+Example:
+
+watchdog {
+	compatible = "ti,twl4030-wdt";
+};
diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
new file mode 100644
index 0000000000..f0a584af12
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+  - Wim Van Sebroeck <wim@linux-watchdog.org>
+
+description: |
+  This document describes generic bindings which can be used to
+  describe watchdog devices in a device tree.
+
+select:
+  properties:
+    $nodename:
+      pattern: "^watchdog(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+properties:
+  $nodename:
+    pattern: "^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  timeout-sec:
+    description:
+      Contains the watchdog timeout in seconds.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
new file mode 100644
index 0000000000..14b0695997
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,versal-wwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal window watchdog timer controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+  Versal watchdog intellectual property uses window watchdog mode.
+  Window watchdog timer(WWDT) contains closed(first) and open(second)
+  window with 32 bit width. Write to the watchdog timer within
+  predefined window periods of time. This means a period that is not
+  too soon and a period that is not too late. The WWDT has to be
+  restarted within the open window time. If software tries to restart
+  WWDT outside of the open window time period, it generates a reset.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-wwdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@fd4d0000 {
+        compatible = "xlnx,versal-wwdt";
+        reg = <0xfd4d0000 0x10000>;
+        clocks = <&clock25>;
+        timeout-sec = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
new file mode 100644
index 0000000000..dc1ff39d05
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI/PLB softcore and window Watchdog Timer
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Srinivas Neeli <srinivas.neeli@amd.com>
+
+description:
+  The Timebase watchdog timer(WDT) is a free-running 32 bit counter.
+  WDT uses a dual-expiration architecture. After one expiration of
+  the timeout interval, an interrupt is generated and the WDT state
+  bit is set to one in the status register. If the state bit is not
+  cleared (by writing a one to the state bit) before the next
+  expiration of the timeout interval, a WDT reset is generated.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-timebase-wdt-1.01.a
+      - xlnx,xps-timebase-wdt-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of clock in Hz
+
+  xlnx,wdt-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Watchdog timeout interval
+    minimum: 8
+    maximum: 32
+
+  xlnx,wdt-enable-once:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: If watchdog is configured as enable once,
+                 then the watchdog cannot be disabled after
+                 it has been enabled.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@40100000 {
+        compatible = "xlnx,xps-timebase-wdt-1.00.a";
+        reg = <0x40100000 0x1000>;
+        clock-frequency = <50000000>;
+        clocks = <&clkc 15>;
+        xlnx,wdt-enable-once = <0x0>;
+        xlnx,wdt-interval = <0x1b>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
new file mode 100644
index 0000000000..3de96186e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt
@@ -0,0 +1,39 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings
+
+RAVE SP watchdog device is a "MFD cell" device corresponding to
+watchdog functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Depending on wire protocol implemented by RAVE SP
+  firmware, should be one of:
+	- "zii,rave-sp-watchdog"
+	- "zii,rave-sp-watchdog-legacy"
+
+Optional properties:
+
+- wdt-timeout:	Two byte nvmem cell specified as per
+		Documentation/devicetree/bindings/nvmem/nvmem.txt
+
+Example:
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		eeprom {
+			wdt_timeout: wdt-timeout@8E {
+				reg = <0x8E 2>;
+			};
+		};
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+			nvmem-cells = <&wdt_timeout>;
+			nvmem-cell-names = "wdt-timeout";
+		};
+	}
+
diff --git a/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt
new file mode 100644
index 0000000000..3d878184ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/ziirave-wdt.txt
@@ -0,0 +1,19 @@
+Zodiac RAVE Watchdog Timer
+
+Required properties:
+- compatible: must be "zii,rave-wdt"
+- reg: i2c slave address of device, usually 0x38
+
+Optional Properties:
+- timeout-sec: Watchdog timeout value in seconds.
+- reset-duration-ms: Duration of the pulse generated when the watchdog times
+  out. Value in milliseconds.
+
+Example:
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+		timeout-sec = <30>;
+		reset-duration-ms = <30>;
+	};
diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst
new file mode 100644
index 0000000000..1ad081de2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/writing-bindings.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+DOs and DON'Ts for designing and writing Devicetree bindings
+============================================================
+
+This is a list of common review feedback items focused on binding design. With
+every rule, there are exceptions and bindings have many gray areas.
+
+For guidelines related to patches, see
+Documentation/devicetree/bindings/submitting-patches.rst
+
+
+Overall design
+==============
+
+- DO attempt to make bindings complete even if a driver doesn't support some
+  features. For example, if a device has an interrupt, then include the
+  'interrupts' property even if the driver is only polled mode.
+
+- DON'T refer to Linux or "device driver" in bindings. Bindings should be
+  based on what the hardware has, not what an OS and driver currently support.
+
+- DO use node names matching the class of the device. Many standard names are
+  defined in the DT Spec. If there isn't one, consider adding it.
+
+- DO check that the example matches the documentation especially after making
+  review changes.
+
+- DON'T create nodes just for the sake of instantiating drivers. Multi-function
+  devices only need child nodes when the child nodes have their own DT
+  resources. A single node can be multiple providers (e.g. clocks and resets).
+
+- DON'T use 'syscon' alone without a specific compatible string. A 'syscon'
+  hardware block should have a compatible string unique enough to infer the
+  register layout of the entire block (at a minimum).
+
+
+Properties
+==========
+
+- DO make 'compatible' properties specific. DON'T use wildcards in compatible
+  strings. DO use fallback compatibles when devices are the same as or a subset
+  of prior implementations. DO add new compatibles in case there are new
+  features or bugs.
+
+- DO use a vendor prefix on device-specific property names. Consider if
+  properties could be common among devices of the same class. Check other
+  existing bindings for similar devices.
+
+- DON'T redefine common properties. Just reference the definition and define
+  constraints specific to the device.
+
+- DO use common property unit suffixes for properties with scientific units.
+  Recommended suffixes are listed at
+  https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml
+
+- DO define properties in terms of constraints. How many entries? What are
+  possible values? What is the order?
+
+Typical cases and caveats
+=========================
+
+- Phandle entries, like clocks/dmas/interrupts/resets, should always be
+  explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is
+  more than one phandle. When used, both of these fields need the same
+  constraints (e.g.  list of items).
+
+- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix,
+  e.g.: "tx" instead of "txirq" (for interrupt).
+
+- Properties without schema types (e.g. without standard suffix or not defined
+  by schema) need the type, even if this is an enum.
+
+- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use
+  "unevaluatedProperties:false". In other cases, usually use
+  "additionalProperties:false".
+
+- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather
+  device-based compatible (e.g. SoC-based compatible), instead of custom
+  versioning of that component.
+  For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2".
+
+- "syscon" is not a generic property. Use vendor and type, e.g.
+  "vendor,power-manager-syscon".
+
+Board/SoC .dts Files
+====================
+
+- DO put all MMIO devices under a bus node and not at the top-level.
+
+- DO use non-empty 'ranges' to limit the size of child buses/devices. 64-bit
+  platforms don't need all devices to have 64-bit address and size.
diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst
new file mode 100644
index 0000000000..4a381d20f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/writing-schema.rst
@@ -0,0 +1,186 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Writing Devicetree Bindings in json-schema
+==========================================
+
+Devicetree bindings are written using json-schema vocabulary. Schema files are
+written in a JSON-compatible subset of YAML. YAML is used instead of JSON as it
+is considered more human readable and has some advantages such as allowing
+comments (Prefixed with '#').
+
+Also see :ref:`example-schema`.
+
+Schema Contents
+---------------
+
+Each schema doc is a structured json-schema which is defined by a set of
+top-level properties. Generally, there is one binding defined per file. The
+top-level json-schema properties used are:
+
+$id
+  A json-schema unique identifier string. The string must be a valid
+  URI typically containing the binding's filename and path. For DT schema, it must
+  begin with "http://devicetree.org/schemas/". The URL is used in constructing
+  references to other files specified in schema "$ref" properties. A $ref value
+  with a leading '/' will have the hostname prepended. A $ref value with only a
+  relative path or filename will be prepended with the hostname and path
+  components of the current schema file's '$id' value. A URL is used even for
+  local files, but there may not actually be files present at those locations.
+
+$schema
+  Indicates the meta-schema the schema file adheres to.
+
+title
+  A one-line description on the contents of the binding schema.
+
+maintainers
+  A DT specific property. Contains a list of email address(es)
+  for maintainers of this binding.
+
+description
+  Optional. A multi-line text block containing any detailed
+  information about this binding. It should contain things such as what the block
+  or device does, standards the device conforms to, and links to datasheets for
+  more information.
+
+select
+  Optional. A json-schema used to match nodes for applying the
+  schema. By default, without 'select', nodes are matched against their possible
+  compatible-string values or node name. Most bindings should not need select.
+
+allOf
+  Optional. A list of other schemas to include. This is used to
+  include other schemas the binding conforms to. This may be schemas for a
+  particular class of devices such as I2C or SPI controllers.
+
+properties
+  A set of sub-schema defining all the DT properties for the
+  binding. The exact schema syntax depends on whether properties are known,
+  common properties (e.g. 'interrupts') or are binding/vendor-specific
+  properties.
+
+A property can also define a child DT node with child properties defined
+under it.
+
+For more details on properties sections, see 'Property Schema' section.
+
+patternProperties
+  Optional. Similar to 'properties', but names are regex.
+
+required
+  A list of DT properties from the 'properties' section that
+  must always be present.
+
+examples
+  Optional. A list of one or more DTS hunks implementing the
+  binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead.
+
+Unless noted otherwise, all properties are required.
+
+Property Schema
+---------------
+
+The 'properties' section of the schema contains all the DT properties for a
+binding. Each property contains a set of constraints using json-schema
+vocabulary for that property. The properties schemas are what are used for
+validation of DT files.
+
+For common properties, only additional constraints not covered by the common,
+binding schema need to be defined such as how many values are valid or what
+possible values are valid.
+
+Vendor-specific properties will typically need more detailed schema. With the
+exception of boolean properties, they should have a reference to a type in
+schemas/types.yaml. A "description" property is always required.
+
+The Devicetree schemas don't exactly match the YAML-encoded DT data produced by
+dtc. They are simplified to make them more compact and avoid a bunch of
+boilerplate. The tools process the schema files to produce the final schema for
+validation. There are currently 2 transformations the tools perform.
+
+The default for arrays in json-schema is they are variable-sized and allow more
+entries than explicitly defined. This can be restricted by defining 'minItems',
+'maxItems', and 'additionalItems'. However, for DeviceTree Schemas, a fixed
+size is desired in most cases, so these properties are added based on the
+number of entries in an 'items' list.
+
+The YAML Devicetree format also makes all string values an array and scalar
+values a matrix (in order to define groupings) even when only a single value
+is present. Single entries in schemas are fixed up to match this encoding.
+
+Coding style
+------------
+
+Use YAML coding style (two-space indentation). For DTS examples in the schema,
+preferred is four-space indentation.
+
+Testing
+-------
+
+Dependencies
+~~~~~~~~~~~~
+
+The DT schema project must be installed in order to validate the DT schema
+binding documents and validate DTS files using the DT schema. The DT schema
+project can be installed with pip::
+
+    pip3 install dtschema
+
+Note that 'dtschema' installation requires 'swig' and Python development files
+installed first. On Debian/Ubuntu systems::
+
+    apt install swig python3-dev
+
+Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be
+installed. Ensure they are in your PATH (~/.local/bin by default).
+
+Recommended is also to install yamllint (used by dtschema when present).
+
+Running checks
+~~~~~~~~~~~~~~
+
+The DT schema binding documents must be validated using the meta-schema (the
+schema for the schema) to ensure they are both valid json-schema and valid
+binding schema. All of the DT binding documents can be validated using the
+``dt_binding_check`` target::
+
+    make dt_binding_check
+
+In order to perform validation of DT source files, use the ``dtbs_check`` target::
+
+    make dtbs_check
+
+Note that ``dtbs_check`` will skip any binding schema files with errors. It is
+necessary to use ``dt_binding_check`` to get all the validation errors in the
+binding schema files.
+
+It is possible to run both in a single command::
+
+    make dt_binding_check dtbs_check
+
+It is also possible to run checks with a subset of matching schema files by
+setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern.
+
+::
+
+    make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml
+    make dt_binding_check DT_SCHEMA_FILES=/gpio/
+    make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml
+
+
+json-schema Resources
+---------------------
+
+
+`JSON-Schema Specifications <http://json-schema.org/>`_
+
+`Using JSON Schema Book <http://usingjsonschema.com/>`_
+
+.. _example-schema:
+
+Annotated Example Schema
+------------------------
+
+Also available as a separate file: :download:`example-schema.yaml`
+
+.. literalinclude:: example-schema.yaml
diff --git a/Documentation/devicetree/bindings/x86/ce4100.txt b/Documentation/devicetree/bindings/x86/ce4100.txt
new file mode 100644
index 0000000000..cd1221bfb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/x86/ce4100.txt
@@ -0,0 +1,57 @@
+CE4100 Device Tree Bindings
+---------------------------
+
+The CE4100 SoC uses for in core peripherals the following compatible
+format: <vendor>,<chip>-<device>.
+Many of the "generic" devices like HPET or IO APIC have the ce4100
+name in their compatible property because they first appeared in this
+SoC.
+
+The CPU nodes
+-------------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "intel,ce4100";
+			reg = <0x00>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "intel,ce4100";
+			reg = <0x02>;
+		};
+	};
+
+A "cpu" node describes one logical processor (hardware thread).
+
+Required properties:
+
+- device_type
+	Device type, must be "cpu".
+
+- reg
+	Local APIC ID, the unique number assigned to each processor by
+	system hardware.
+
+The SoC node
+------------
+
+This node describes the in-core peripherals. Required property:
+  compatible = "intel,ce4100-cp";
+
+The PCI node
+------------
+This node describes the PCI bus on the SoC. Its property should be
+  compatible = "intel,ce4100-pci", "pci";
+
+If the OS is using the IO-APIC for interrupt routing then the reported
+interrupt numbers for devices is no longer true. In order to obtain the
+correct interrupt number, the child node which represents the device has
+to contain the interrupt property. Besides the interrupt property it has
+to contain at least the reg property containing the PCI bus address and
+compatible property according to "PCI Bus Binding Revision 2.1".
diff --git a/Documentation/devicetree/bindings/x86/timer.txt b/Documentation/devicetree/bindings/x86/timer.txt
new file mode 100644
index 0000000000..c688af58e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/x86/timer.txt
@@ -0,0 +1,6 @@
+Timers
+------
+
+* High Precision Event Timer (HPET)
+  Required property:
+     compatible = "intel,ce4100-hpet";
diff --git a/Documentation/devicetree/bindings/xilinx.txt b/Documentation/devicetree/bindings/xilinx.txt
new file mode 100644
index 0000000000..28199b31fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/xilinx.txt
@@ -0,0 +1,165 @@
+   d) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellaneous
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requires the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name): (generic-name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(generic-name):   an open firmware-style name that describes the
+			generic class of device.  Preferably, this is one word, such
+			as 'serial' or 'ethernet'.
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
+	(HW_VER):	from the HW_VER parameter.
+	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb_uartlite_0: serial@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb_intc_0>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Required properties:
+       - current-speed : Baud rate of uartlite
+
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+		- compatible : should contain "xlnx,xps-hwicap-1.00.a" or
+				"xlnx,opb-hwicap-1.00.b".
+
+      vi) Xilinx Uart 16550
+
+      Xilinx UART 16550 devices are very similar to the NS16550 but with
+      different register spacing and an offset from the base address.
+
+      Required properties:
+       - clock-frequency : Frequency of the clock input
+       - reg-offset : A value of 3 is required
+       - reg-shift : A value of 2 is required
+
+      vii) Xilinx USB Host controller
+
+      The Xilinx USB host controller is EHCI compatible but with a different
+      base address for the EHCI registers, and it is always a big-endian
+      USB Host controller. The hardware can be configured as high speed only,
+      or high speed/full speed hybrid.
+
+      Required properties:
+      - xlnx,support-usb-fs: A value 0 means the core is built as high speed
+                             only. A value 1 means the core also supports
+                             full speed devices.
+
diff --git a/Documentation/devicetree/bindings/xillybus/xillybus.txt b/Documentation/devicetree/bindings/xillybus/xillybus.txt
new file mode 100644
index 0000000000..e65d1f94b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/xillybus/xillybus.txt
@@ -0,0 +1,18 @@
+* Xillybus driver for generic FPGA interface
+
+Required properties:
+- compatible: Should be "xillybus,xillybus-1.00.a"
+- reg: Address and length of the register set for the device
+- interrupts: Contains one interrupt node, typically consisting of three cells.
+
+Optional properties:
+- dma-coherent: Present if DMA operations are coherent
+
+Example:
+
+	xillybus@ff200400 {
+		compatible = "xillybus,xillybus-1.00.a";
+		reg = < 0xff200400 0x00000080 >;
+		interrupts = < 0 40 1 >;
+		interrupt-parent = <&intc>;
+	} ;
diff --git a/Documentation/devicetree/changesets.rst b/Documentation/devicetree/changesets.rst
new file mode 100644
index 0000000000..2091468d48
--- /dev/null
+++ b/Documentation/devicetree/changesets.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Devicetree Changesets
+=====================
+
+A Devicetree changeset is a method which allows one to apply changes
+in the live tree in such a way that either the full set of changes
+will be applied, or none of them will be. If an error occurs partway
+through applying the changeset, then the tree will be rolled back to the
+previous state. A changeset can also be removed after it has been
+applied.
+
+When a changeset is applied, all of the changes get applied to the tree
+at once before emitting OF_RECONFIG notifiers. This is so that the
+receiver sees a complete and consistent state of the tree when it
+receives the notifier.
+
+The sequence of a changeset is as follows.
+
+1. of_changeset_init() - initializes a changeset
+
+2. A number of DT tree change calls, of_changeset_attach_node(),
+   of_changeset_detach_node(), of_changeset_add_property(),
+   of_changeset_remove_property, of_changeset_update_property() to prepare
+   a set of changes. No changes to the active tree are made at this point.
+   All the change operations are recorded in the of_changeset 'entries'
+   list.
+
+3. of_changeset_apply() - Apply the changes to the tree. Either the
+   entire changeset will get applied, or if there is an error the tree will
+   be restored to the previous state. The core ensures proper serialization
+   through locking. An unlocked version __of_changeset_apply is available,
+   if needed.
+
+If a successfully applied changeset needs to be removed, it can be done
+with of_changeset_revert().
diff --git a/Documentation/devicetree/dynamic-resolution-notes.rst b/Documentation/devicetree/dynamic-resolution-notes.rst
new file mode 100644
index 0000000000..f81ad8daa3
--- /dev/null
+++ b/Documentation/devicetree/dynamic-resolution-notes.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Devicetree Dynamic Resolver Notes
+=================================
+
+This document describes the implementation of the in-kernel
+DeviceTree resolver, residing in drivers/of/resolver.c
+
+How the resolver works
+----------------------
+
+The resolver is given as an input an arbitrary tree compiled with the
+proper dtc option and having a /plugin/ tag. This generates the
+appropriate __fixups__ & __local_fixups__ nodes.
+
+In sequence the resolver works by the following steps:
+
+1. Get the maximum device tree phandle value from the live tree + 1.
+2. Adjust all the local phandles of the tree to resolve by that amount.
+3. Using the __local__fixups__ node information adjust all local references
+   by the same amount.
+4. For each property in the __fixups__ node locate the node it references
+   in the live tree. This is the label used to tag the node.
+5. Retrieve the phandle of the target of the fixup.
+6. For each fixup in the property locate the node:property:offset location
+   and replace it with the phandle value.
diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
new file mode 100644
index 0000000000..1a2fc80149
--- /dev/null
+++ b/Documentation/devicetree/index.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Open Firmware and Devicetree
+=============================
+
+Kernel Devicetree Usage
+=======================
+.. toctree::
+   :maxdepth: 1
+
+   usage-model
+   of_unittest
+   kernel-api
+
+Devicetree Overlays
+===================
+.. toctree::
+   :maxdepth: 1
+
+   changesets
+   dynamic-resolution-notes
+   overlay-notes
+
+Devicetree Bindings
+===================
+.. toctree::
+   :maxdepth: 1
+
+   bindings/index
diff --git a/Documentation/devicetree/kernel-api.rst b/Documentation/devicetree/kernel-api.rst
new file mode 100644
index 0000000000..b7429e6ed6
--- /dev/null
+++ b/Documentation/devicetree/kernel-api.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _devicetree:
+
+======================================
+DeviceTree Kernel API
+======================================
+
+Core functions
+--------------
+
+.. kernel-doc:: drivers/of/base.c
+   :export:
+
+.. kernel-doc:: include/linux/of.h
+   :internal:
+
+.. kernel-doc:: drivers/of/property.c
+   :export:
+
+.. kernel-doc:: include/linux/of_graph.h
+   :internal:
+
+.. kernel-doc:: drivers/of/address.c
+   :export:
+
+.. kernel-doc:: drivers/of/irq.c
+   :export:
+
+.. kernel-doc:: drivers/of/fdt.c
+   :export:
+
+Driver model functions
+----------------------
+
+.. kernel-doc:: include/linux/of_device.h
+   :internal:
+
+.. kernel-doc:: drivers/of/device.c
+   :export:
+
+.. kernel-doc:: include/linux/of_platform.h
+   :internal:
+
+.. kernel-doc:: drivers/of/platform.c
+   :export:
+
+Overlay and Dynamic DT functions
+--------------------------------
+
+.. kernel-doc:: drivers/of/resolver.c
+   :export:
+
+.. kernel-doc:: drivers/of/dynamic.c
+   :export:
+
+.. kernel-doc:: drivers/of/overlay.c
+   :export:
diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst
new file mode 100644
index 0000000000..8864b52d11
--- /dev/null
+++ b/Documentation/devicetree/of_unittest.rst
@@ -0,0 +1,226 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================
+Open Firmware Devicetree Unittest
+=================================
+
+Author: Gaurav Minocha <gaurav.minocha.os@gmail.com>
+
+1. Introduction
+===============
+
+This document explains how the test data required for executing OF unittest
+is attached to the live tree dynamically, independent of the machine's
+architecture.
+
+It is recommended to read the following documents before moving ahead.
+
+(1) Documentation/devicetree/usage-model.rst
+(2) http://www.devicetree.org/Device_Tree_Usage
+
+OF Selftest has been designed to test the interface (include/linux/of.h)
+provided to device driver developers to fetch the device information..etc.
+from the unflattened device tree data structure. This interface is used by
+most of the device drivers in various use cases.
+
+
+2. Verbose Output (EXPECT)
+==========================
+
+If unittest detects a problem it will print a warning or error message to
+the console.  Unittest also triggers warning and error messages from other
+kernel code as a result of intentionally bad unittest data.  This has led
+to confusion as to whether the triggered messages are an expected result
+of a test or whether there is a real problem that is independent of unittest.
+
+'EXPECT \ : text' (begin) and 'EXPECT / : text' (end) messages have been
+added to unittest to report that a warning or error is expected.  The
+begin is printed before triggering the warning or error, and the end is
+printed after triggering the warning or error.
+
+The EXPECT messages result in very noisy console messages that are difficult
+to read.  The script scripts/dtc/of_unittest_expect was created to filter
+this verbosity and highlight mismatches between triggered warnings and
+errors vs expected warnings and errors.  More information is available
+from 'scripts/dtc/of_unittest_expect --help'.
+
+
+3. Test-data
+============
+
+The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains
+the test data required for executing the unit tests automated in
+drivers/of/unittest.c. Currently, following Device Tree Source Include files
+(.dtsi) are included in testcases.dts::
+
+    drivers/of/unittest-data/tests-interrupts.dtsi
+    drivers/of/unittest-data/tests-platform.dtsi
+    drivers/of/unittest-data/tests-phandle.dtsi
+    drivers/of/unittest-data/tests-match.dtsi
+
+When the kernel is build with OF_SELFTEST enabled, then the following make
+rule::
+
+    $(obj)/%.dtb: $(src)/%.dts FORCE
+	    $(call if_changed_dep, dtc)
+
+is used to compile the DT source file (testcases.dts) into a binary blob
+(testcases.dtb), also referred as flattened DT.
+
+After that, using the following rule the binary blob above is wrapped as an
+assembly file (testcases.dtb.S)::
+
+    $(obj)/%.dtb.S: $(obj)/%.dtb
+	    $(call cmd, dt_S_dtb)
+
+The assembly file is compiled into an object file (testcases.dtb.o), and is
+linked into the kernel image.
+
+
+3.1. Adding the test data
+-------------------------
+
+Un-flattened device tree structure:
+
+Un-flattened device tree consists of connected device_node(s) in form of a tree
+structure described below::
+
+    // following struct members are used to construct the tree
+    struct device_node {
+	...
+	struct  device_node *parent;
+	struct  device_node *child;
+	struct  device_node *sibling;
+	...
+    };
+
+Figure 1, describes a generic structure of machine's un-flattened device tree
+considering only child and sibling pointers. There exists another pointer,
+``*parent``, that is used to traverse the tree in the reverse direction. So, at
+a particular level the child node and all the sibling nodes will have a parent
+pointer pointing to a common node (e.g. child1, sibling2, sibling3, sibling4's
+parent points to root node)::
+
+    root ('/')
+    |
+    child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |         |           |           |
+    |         |           |          null
+    |         |           |
+    |         |        child31 -> sibling32 -> null
+    |         |           |          |
+    |         |          null       null
+    |         |
+    |      child21 -> sibling22 -> sibling23 -> null
+    |         |          |            |
+    |        null       null         null
+    |
+    child11 -> sibling12 -> sibling13 -> sibling14 -> null
+    |           |           |            |
+    |           |           |           null
+    |           |           |
+    null        null       child131 -> null
+			    |
+			    null
+
+Figure 1: Generic structure of un-flattened device tree
+
+
+Before executing OF unittest, it is required to attach the test data to
+machine's device tree (if present). So, when selftest_data_add() is called,
+at first it reads the flattened device tree data linked into the kernel image
+via the following kernel symbols::
+
+    __dtb_testcases_begin - address marking the start of test data blob
+    __dtb_testcases_end   - address marking the end of test data blob
+
+Secondly, it calls of_fdt_unflatten_tree() to unflatten the flattened
+blob. And finally, if the machine's device tree (i.e live tree) is present,
+then it attaches the unflattened test data tree to the live tree, else it
+attaches itself as a live device tree.
+
+attach_node_and_children() uses of_attach_node() to attach the nodes into the
+live tree as explained below. To explain the same, the test data tree described
+in Figure 2 is attached to the live tree described in Figure 1::
+
+    root ('/')
+	|
+    testcase-data
+	|
+    test-child0 -> test-sibling1 -> test-sibling2 -> test-sibling3 -> null
+	|               |                |                |
+    test-child01      null             null             null
+
+
+Figure 2: Example test data tree to be attached to live tree.
+
+According to the scenario above, the live tree is already present so it isn't
+required to attach the root('/') node. All other nodes are attached by calling
+of_attach_node() on each node.
+
+In the function of_attach_node(), the new node is attached as the child of the
+given parent in live tree. But, if parent already has a child then the new node
+replaces the current child and turns it into its sibling. So, when the testcase
+data node is attached to the live tree above (Figure 1), the final structure is
+as shown in Figure 3::
+
+    root ('/')
+    |
+    testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |               |          |           |           |
+    (...)             |          |           |          null
+		    |          |         child31 -> sibling32 -> null
+		    |          |           |           |
+		    |          |          null        null
+		    |          |
+		    |        child21 -> sibling22 -> sibling23 -> null
+		    |          |           |            |
+		    |         null        null         null
+		    |
+		    child11 -> sibling12 -> sibling13 -> sibling14 -> null
+		    |          |            |            |
+		    null       null          |           null
+					    |
+					    child131 -> null
+					    |
+					    null
+    -----------------------------------------------------------------------
+
+    root ('/')
+    |
+    testcase-data -> child1 -> sibling2 -> sibling3 -> sibling4 -> null
+    |               |          |           |           |
+    |             (...)      (...)       (...)        null
+    |
+    test-sibling3 -> test-sibling2 -> test-sibling1 -> test-child0 -> null
+    |                |                   |                |
+    null             null                null         test-child01
+
+
+Figure 3: Live device tree structure after attaching the testcase-data.
+
+
+Astute readers would have noticed that test-child0 node becomes the last
+sibling compared to the earlier structure (Figure 2). After attaching first
+test-child0 the test-sibling1 is attached that pushes the child node
+(i.e. test-child0) to become a sibling and makes itself a child node,
+as mentioned above.
+
+If a duplicate node is found (i.e. if a node with same full_name property is
+already present in the live tree), then the node isn't attached rather its
+properties are updated to the live tree's node by calling the function
+update_node_properties().
+
+
+3.2. Removing the test data
+---------------------------
+
+Once the test case execution is complete, selftest_data_remove is called in
+order to remove the device nodes attached initially (first the leaf nodes are
+detached and then moving up the parent nodes are removed, and eventually the
+whole tree). selftest_data_remove() calls detach_node_and_children() that uses
+of_detach_node() to detach the nodes from the live device tree.
+
+To detach a node, of_detach_node() either updates the child pointer of given
+node's parent to its sibling or attaches the previous sibling to the given
+node's sibling, as appropriate. That is it :)
diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst
new file mode 100644
index 0000000000..e139f22b36
--- /dev/null
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -0,0 +1,150 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Devicetree Overlay Notes
+========================
+
+This document describes the implementation of the in-kernel
+device tree overlay functionality residing in drivers/of/overlay.c and is a
+companion document to Documentation/devicetree/dynamic-resolution-notes.rst[1]
+
+How overlays work
+-----------------
+
+A Devicetree's overlay purpose is to modify the kernel's live tree, and
+have the modification affecting the state of the kernel in a way that
+is reflecting the changes.
+Since the kernel mainly deals with devices, any new device node that result
+in an active device should have it created while if the device node is either
+disabled or removed all together, the affected device should be deregistered.
+
+Lets take an example where we have a foo board with the following base tree::
+
+    ---- foo.dts ---------------------------------------------------------------
+	/* FOO platform */
+	/dts-v1/;
+	/ {
+		compatible = "corp,foo";
+
+		/* shared resources */
+		res: res {
+		};
+
+		/* On chip peripherals */
+		ocp: ocp {
+			/* peripherals that are always instantiated */
+			peripheral1 { ... };
+		};
+	};
+    ---- foo.dts ---------------------------------------------------------------
+
+The overlay bar.dts,
+::
+
+    ---- bar.dts - overlay target location by label ----------------------------
+	/dts-v1/;
+	/plugin/;
+	&ocp {
+		/* bar peripheral */
+		bar {
+			compatible = "corp,bar";
+			... /* various properties and child nodes */
+		};
+	};
+    ---- bar.dts ---------------------------------------------------------------
+
+when loaded (and resolved as described in [1]) should result in foo+bar.dts::
+
+    ---- foo+bar.dts -----------------------------------------------------------
+	/* FOO platform + bar peripheral */
+	/ {
+		compatible = "corp,foo";
+
+		/* shared resources */
+		res: res {
+		};
+
+		/* On chip peripherals */
+		ocp: ocp {
+			/* peripherals that are always instantiated */
+			peripheral1 { ... };
+
+			/* bar peripheral */
+			bar {
+				compatible = "corp,bar";
+				... /* various properties and child nodes */
+			};
+		};
+	};
+    ---- foo+bar.dts -----------------------------------------------------------
+
+As a result of the overlay, a new device node (bar) has been created
+so a bar platform device will be registered and if a matching device driver
+is loaded the device will be created as expected.
+
+If the base DT was not compiled with the -@ option then the "&ocp" label
+will not be available to resolve the overlay node(s) to the proper location
+in the base DT. In this case, the target path can be provided. The target
+location by label syntax is preferred because the overlay can be applied to
+any base DT containing the label, no matter where the label occurs in the DT.
+
+The above bar.dts example modified to use target path syntax is::
+
+    ---- bar.dts - overlay target location by explicit path --------------------
+	/dts-v1/;
+	/plugin/;
+	&{/ocp} {
+		/* bar peripheral */
+		bar {
+			compatible = "corp,bar";
+			... /* various properties and child nodes */
+		}
+	};
+    ---- bar.dts ---------------------------------------------------------------
+
+
+Overlay in-kernel API
+--------------------------------
+
+The API is quite easy to use.
+
+1) Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+   return value is an error or a cookie identifying this overlay.
+
+2) Call of_overlay_remove() to remove and cleanup the overlay changeset
+   previously created via the call to of_overlay_fdt_apply(). Removal of an
+   overlay changeset that is stacked by another will not be permitted.
+
+Finally, if you need to remove all overlays in one-go, just call
+of_overlay_remove_all() which will remove every single one in the correct
+order.
+
+There is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE.  The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called.  Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay.  These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content.  The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data.  Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.
diff --git a/Documentation/devicetree/usage-model.rst b/Documentation/devicetree/usage-model.rst
new file mode 100644
index 0000000000..0717426856
--- /dev/null
+++ b/Documentation/devicetree/usage-model.rst
@@ -0,0 +1,420 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Linux and the Devicetree
+========================
+
+The Linux usage model for device tree data
+
+:Author: Grant Likely <grant.likely@secretlab.ca>
+
+This article describes how Linux uses the device tree.  An overview of
+the device tree data format can be found on the device tree usage page
+at devicetree.org\ [1]_.
+
+.. [1] https://www.devicetree.org/specifications/
+
+The "Open Firmware Device Tree", or simply Devicetree (DT), is a data
+structure and language for describing hardware.  More specifically, it
+is a description of hardware that is readable by an operating system
+so that the operating system doesn't need to hard code details of the
+machine.
+
+Structurally, the DT is a tree, or acyclic graph with named nodes, and
+nodes may have an arbitrary number of named properties encapsulating
+arbitrary data.  A mechanism also exists to create arbitrary
+links from one node to another outside of the natural tree structure.
+
+Conceptually, a common set of usage conventions, called 'bindings',
+is defined for how data should appear in the tree to describe typical
+hardware characteristics including data busses, interrupt lines, GPIO
+connections, and peripheral devices.
+
+As much as possible, hardware is described using existing bindings to
+maximize use of existing support code, but since property and node
+names are simply text strings, it is easy to extend existing bindings
+or create new ones by defining new nodes and properties.  Be wary,
+however, of creating a new binding without first doing some homework
+about what already exists.  There are currently two different,
+incompatible, bindings for i2c busses that came about because the new
+binding was created without first investigating how i2c devices were
+already being enumerated in existing systems.
+
+1. History
+----------
+The DT was originally created by Open Firmware as part of the
+communication method for passing data from Open Firmware to a client
+program (like to an operating system).  An operating system used the
+Device Tree to discover the topology of the hardware at runtime, and
+thereby support a majority of available hardware without hard coded
+information (assuming drivers were available for all devices).
+
+Since Open Firmware is commonly used on PowerPC and SPARC platforms,
+the Linux support for those architectures has for a long time used the
+Device Tree.
+
+In 2005, when PowerPC Linux began a major cleanup and to merge 32-bit
+and 64-bit support, the decision was made to require DT support on all
+powerpc platforms, regardless of whether or not they used Open
+Firmware.  To do this, a DT representation called the Flattened Device
+Tree (FDT) was created which could be passed to the kernel as a binary
+blob without requiring a real Open Firmware implementation.  U-Boot,
+kexec, and other bootloaders were modified to support both passing a
+Device Tree Binary (dtb) and to modify a dtb at boot time.  DT was
+also added to the PowerPC boot wrapper (``arch/powerpc/boot/*``) so that
+a dtb could be wrapped up with the kernel image to support booting
+existing non-DT aware firmware.
+
+Some time later, FDT infrastructure was generalized to be usable by
+all architectures.  At the time of this writing, 6 mainlined
+architectures (arm, microblaze, mips, powerpc, sparc, and x86) and 1
+out of mainline (nios) have some level of DT support.
+
+2. Data Model
+-------------
+If you haven't already read the Device Tree Usage\ [1]_ page,
+then go read it now.  It's okay, I'll wait....
+
+2.1 High Level View
+-------------------
+The most important thing to understand is that the DT is simply a data
+structure that describes the hardware.  There is nothing magical about
+it, and it doesn't magically make all hardware configuration problems
+go away.  What it does do is provide a language for decoupling the
+hardware configuration from the board and device driver support in the
+Linux kernel (or any other operating system for that matter).  Using
+it allows board and device support to become data driven; to make
+setup decisions based on data passed into the kernel instead of on
+per-machine hard coded selections.
+
+Ideally, data driven platform setup should result in less code
+duplication and make it easier to support a wide range of hardware
+with a single kernel image.
+
+Linux uses DT data for three major purposes:
+
+1) platform identification,
+2) runtime configuration, and
+3) device population.
+
+2.2 Platform Identification
+---------------------------
+First and foremost, the kernel will use data in the DT to identify the
+specific machine.  In a perfect world, the specific platform shouldn't
+matter to the kernel because all platform details would be described
+perfectly by the device tree in a consistent and reliable manner.
+Hardware is not perfect though, and so the kernel must identify the
+machine during early boot so that it has the opportunity to run
+machine-specific fixups.
+
+In the majority of cases, the machine identity is irrelevant, and the
+kernel will instead select setup code based on the machine's core
+CPU or SoC.  On ARM for example, setup_arch() in
+arch/arm/kernel/setup.c will call setup_machine_fdt() in
+arch/arm/kernel/devtree.c which searches through the machine_desc
+table and selects the machine_desc which best matches the device tree
+data.  It determines the best match by looking at the 'compatible'
+property in the root device tree node, and comparing it with the
+dt_compat list in struct machine_desc (which is defined in
+arch/arm/include/asm/mach/arch.h if you're curious).
+
+The 'compatible' property contains a sorted list of strings starting
+with the exact name of the machine, followed by an optional list of
+boards it is compatible with sorted from most compatible to least.  For
+example, the root compatible properties for the TI BeagleBoard and its
+successor, the BeagleBoard xM board might look like, respectively::
+
+	compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3";
+	compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
+
+Where "ti,omap3-beagleboard-xm" specifies the exact model, it also
+claims that it compatible with the OMAP 3450 SoC, and the omap3 family
+of SoCs in general.  You'll notice that the list is sorted from most
+specific (exact board) to least specific (SoC family).
+
+Astute readers might point out that the Beagle xM could also claim
+compatibility with the original Beagle board.  However, one should be
+cautioned about doing so at the board level since there is typically a
+high level of change from one board to another, even within the same
+product line, and it is hard to nail down exactly what is meant when one
+board claims to be compatible with another.  For the top level, it is
+better to err on the side of caution and not claim one board is
+compatible with another.  The notable exception would be when one
+board is a carrier for another, such as a CPU module attached to a
+carrier board.
+
+One more note on compatible values.  Any string used in a compatible
+property must be documented as to what it indicates.  Add
+documentation for compatible strings in Documentation/devicetree/bindings.
+
+Again on ARM, for each machine_desc, the kernel looks to see if
+any of the dt_compat list entries appear in the compatible property.
+If one does, then that machine_desc is a candidate for driving the
+machine.  After searching the entire table of machine_descs,
+setup_machine_fdt() returns the 'most compatible' machine_desc based
+on which entry in the compatible property each machine_desc matches
+against.  If no matching machine_desc is found, then it returns NULL.
+
+The reasoning behind this scheme is the observation that in the majority
+of cases, a single machine_desc can support a large number of boards
+if they all use the same SoC, or same family of SoCs.  However,
+invariably there will be some exceptions where a specific board will
+require special setup code that is not useful in the generic case.
+Special cases could be handled by explicitly checking for the
+troublesome board(s) in generic setup code, but doing so very quickly
+becomes ugly and/or unmaintainable if it is more than just a couple of
+cases.
+
+Instead, the compatible list allows a generic machine_desc to provide
+support for a wide common set of boards by specifying "less
+compatible" values in the dt_compat list.  In the example above,
+generic board support can claim compatibility with "ti,omap3" or
+"ti,omap3450".  If a bug was discovered on the original beagleboard
+that required special workaround code during early boot, then a new
+machine_desc could be added which implements the workarounds and only
+matches on "ti,omap3-beagleboard".
+
+PowerPC uses a slightly different scheme where it calls the .probe()
+hook from each machine_desc, and the first one returning TRUE is used.
+However, this approach does not take into account the priority of the
+compatible list, and probably should be avoided for new architecture
+support.
+
+2.3 Runtime configuration
+-------------------------
+In most cases, a DT will be the sole method of communicating data from
+firmware to the kernel, so also gets used to pass in runtime and
+configuration data like the kernel parameters string and the location
+of an initrd image.
+
+Most of this data is contained in the /chosen node, and when booting
+Linux it will look something like this::
+
+	chosen {
+		bootargs = "console=ttyS0,115200 loglevel=8";
+		initrd-start = <0xc8000000>;
+		initrd-end = <0xc8200000>;
+	};
+
+The bootargs property contains the kernel arguments, and the initrd-*
+properties define the address and size of an initrd blob.  Note that
+initrd-end is the first address after the initrd image, so this doesn't
+match the usual semantic of struct resource.  The chosen node may also
+optionally contain an arbitrary number of additional properties for
+platform-specific configuration data.
+
+During early boot, the architecture setup code calls of_scan_flat_dt()
+several times with different helper callbacks to parse device tree
+data before paging is setup.  The of_scan_flat_dt() code scans through
+the device tree and uses the helpers to extract information required
+during early boot.  Typically the early_init_dt_scan_chosen() helper
+is used to parse the chosen node including kernel parameters,
+early_init_dt_scan_root() to initialize the DT address space model,
+and early_init_dt_scan_memory() to determine the size and
+location of usable RAM.
+
+On ARM, the function setup_machine_fdt() is responsible for early
+scanning of the device tree after selecting the correct machine_desc
+that supports the board.
+
+2.4 Device population
+---------------------
+After the board has been identified, and after the early configuration data
+has been parsed, then kernel initialization can proceed in the normal
+way.  At some point in this process, unflatten_device_tree() is called
+to convert the data into a more efficient runtime representation.
+This is also when machine-specific setup hooks will get called, like
+the machine_desc .init_early(), .init_irq() and .init_machine() hooks
+on ARM.  The remainder of this section uses examples from the ARM
+implementation, but all architectures will do pretty much the same
+thing when using a DT.
+
+As can be guessed by the names, .init_early() is used for any machine-
+specific setup that needs to be executed early in the boot process,
+and .init_irq() is used to set up interrupt handling.  Using a DT
+doesn't materially change the behaviour of either of these functions.
+If a DT is provided, then both .init_early() and .init_irq() are able
+to call any of the DT query functions (of_* in include/linux/of*.h) to
+get additional data about the platform.
+
+The most interesting hook in the DT context is .init_machine() which
+is primarily responsible for populating the Linux device model with
+data about the platform.  Historically this has been implemented on
+embedded platforms by defining a set of static clock structures,
+platform_devices, and other data in the board support .c file, and
+registering it en-masse in .init_machine().  When DT is used, then
+instead of hard coding static devices for each platform, the list of
+devices can be obtained by parsing the DT, and allocating device
+structures dynamically.
+
+The simplest case is when .init_machine() is only responsible for
+registering a block of platform_devices.  A platform_device is a concept
+used by Linux for memory or I/O mapped devices which cannot be detected
+by hardware, and for 'composite' or 'virtual' devices (more on those
+later).  While there is no 'platform device' terminology for the DT,
+platform devices roughly correspond to device nodes at the root of the
+tree and children of simple memory mapped bus nodes.
+
+About now is a good time to lay out an example.  Here is part of the
+device tree for the NVIDIA Tegra board::
+
+  /{
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	soc {
+		compatible = "nvidia,tegra20-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller@50041000 {
+			compatible = "nvidia,tegra20-gic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x50041000 0x1000>, < 0x50040100 0x0100 >;
+		};
+
+		serial@70006300 {
+			compatible = "nvidia,tegra20-uart";
+			reg = <0x70006300 0x100>;
+			interrupts = <122>;
+		};
+
+		i2s1: i2s@70002800 {
+			compatible = "nvidia,tegra20-i2s";
+			reg = <0x70002800 0x100>;
+			interrupts = <77>;
+			codec = <&wm8903>;
+		};
+
+		i2c@7000c000 {
+			compatible = "nvidia,tegra20-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7000c000 0x100>;
+			interrupts = <70>;
+
+			wm8903: codec@1a {
+				compatible = "wlf,wm8903";
+				reg = <0x1a>;
+				interrupts = <347>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "nvidia,harmony-sound";
+		i2s-controller = <&i2s1>;
+		i2s-codec = <&wm8903>;
+	};
+  };
+
+At .init_machine() time, Tegra board support code will need to look at
+this DT and decide which nodes to create platform_devices for.
+However, looking at the tree, it is not immediately obvious what kind
+of device each node represents, or even if a node represents a device
+at all.  The /chosen, /aliases, and /memory nodes are informational
+nodes that don't describe devices (although arguably memory could be
+considered a device).  The children of the /soc node are memory mapped
+devices, but the codec@1a is an i2c device, and the sound node
+represents not a device, but rather how other devices are connected
+together to create the audio subsystem.  I know what each device is
+because I'm familiar with the board design, but how does the kernel
+know what to do with each node?
+
+The trick is that the kernel starts at the root of the tree and looks
+for nodes that have a 'compatible' property.  First, it is generally
+assumed that any node with a 'compatible' property represents a device
+of some kind, and second, it can be assumed that any node at the root
+of the tree is either directly attached to the processor bus, or is a
+miscellaneous system device that cannot be described any other way.
+For each of these nodes, Linux allocates and registers a
+platform_device, which in turn may get bound to a platform_driver.
+
+Why is using a platform_device for these nodes a safe assumption?
+Well, for the way that Linux models devices, just about all bus_types
+assume that its devices are children of a bus controller.  For
+example, each i2c_client is a child of an i2c_master.  Each spi_device
+is a child of an SPI bus.  Similarly for USB, PCI, MDIO, etc.  The
+same hierarchy is also found in the DT, where I2C device nodes only
+ever appear as children of an I2C bus node.  Ditto for SPI, MDIO, USB,
+etc.  The only devices which do not require a specific type of parent
+device are platform_devices (and amba_devices, but more on that
+later), which will happily live at the base of the Linux /sys/devices
+tree.  Therefore, if a DT node is at the root of the tree, then it
+really probably is best registered as a platform_device.
+
+Linux board support code calls of_platform_populate(NULL, NULL, NULL, NULL)
+to kick off discovery of devices at the root of the tree.  The
+parameters are all NULL because when starting from the root of the
+tree, there is no need to provide a starting node (the first NULL), a
+parent struct device (the last NULL), and we're not using a match
+table (yet).  For a board that only needs to register devices,
+.init_machine() can be completely empty except for the
+of_platform_populate() call.
+
+In the Tegra example, this accounts for the /soc and /sound nodes, but
+what about the children of the SoC node?  Shouldn't they be registered
+as platform devices too?  For Linux DT support, the generic behaviour
+is for child devices to be registered by the parent's device driver at
+driver .probe() time.  So, an i2c bus device driver will register a
+i2c_client for each child node, an SPI bus driver will register
+its spi_device children, and similarly for other bus_types.
+According to that model, a driver could be written that binds to the
+SoC node and simply registers platform_devices for each of its
+children.  The board support code would allocate and register an SoC
+device, a (theoretical) SoC device driver could bind to the SoC device,
+and register platform_devices for /soc/interrupt-controller, /soc/serial,
+/soc/i2s, and /soc/i2c in its .probe() hook.  Easy, right?
+
+Actually, it turns out that registering children of some
+platform_devices as more platform_devices is a common pattern, and the
+device tree support code reflects that and makes the above example
+simpler.  The second argument to of_platform_populate() is an
+of_device_id table, and any node that matches an entry in that table
+will also get its child nodes registered.  In the Tegra case, the code
+can look something like this::
+
+  static void __init harmony_init_machine(void)
+  {
+	/* ... */
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+  }
+
+"simple-bus" is defined in the Devicetree Specification as a property
+meaning a simple memory mapped bus, so the of_platform_populate() code
+could be written to just assume simple-bus compatible nodes will
+always be traversed.  However, we pass it in as an argument so that
+board support code can always override the default behaviour.
+
+[Need to add discussion of adding i2c/spi/etc child devices]
+
+Appendix A: AMBA devices
+------------------------
+
+ARM Primecells are a certain kind of device attached to the ARM AMBA
+bus which include some support for hardware detection and power
+management.  In Linux, struct amba_device and the amba_bus_type is
+used to represent Primecell devices.  However, the fiddly bit is that
+not all devices on an AMBA bus are Primecells, and for Linux it is
+typical for both amba_device and platform_device instances to be
+siblings of the same bus segment.
+
+When using the DT, this creates problems for of_platform_populate()
+because it must decide whether to register each node as either a
+platform_device or an amba_device.  This unfortunately complicates the
+device creation model a little bit, but the solution turns out not to
+be too invasive.  If a node is compatible with "arm,primecell", then
+of_platform_populate() will register it as an amba_device instead of a
+platform_device.